From cbcdd87593a1d85c5c4b259945a3a09eee12814d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 18 Aug 2007 13:14:55 +0900 Subject: libata: implement and use ata_port_desc() to report port configuration Currently, port configuration reporting has the following problems. * iomapped address is reported instead of raw address * report contains irrelevant fields or lacks necessary fields for non-SFF controllers. * host->irq/irq2 are there just for reporting and hacky. This patch implements and uses ata_port_desc() and ata_port_pbar_desc(). ata_port_desc() is almost identical to ata_ehi_push_desc() except that it takes @ap instead of @ehi, has no locking requirement, can only be used during host initialization and " " is used as separator instead of ", ". ata_port_pbar_desc() is a helper to ease reporting of a PCI BAR or an offsetted address into it. LLD pushes whatever description it wants using the above two functions. The accumulated description is printed on host registration after "[S/P]ATA max MAX_XFERMODE ". SFF init helpers and ata_host_activate() automatically add descriptions for addresses and irq respectively, so only LLDs which isn't standard SFF need to add custom descriptions. In many cases, such controllers need to report different things anyway. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/pata_legacy.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/ata/pata_legacy.c') diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index 6cae26f4d27..7bed8d80638 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -799,6 +799,8 @@ static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl ata_std_ports(&ap->ioaddr); ap->private_data = ld; + ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io, ctrl); + ret = ata_host_activate(host, irq, ata_interrupt, 0, &legacy_sht); if (ret) goto fail; -- cgit v1.2.3-18-g5258