From 669a5db411d85a14f86cd92bc16bf7ab5b8aa235 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 29 Aug 2006 18:12:40 -0400 Subject: [libata] Add a bunch of PATA drivers. The vast majority of drivers and changes are from Alan Cox. Albert Lee contributed and maintains pata_pdc2027x. Adrian Bunk, Andrew Morton, and Tejun Heo contributed various minor fixes and updates. Signed-off-by: Jeff Garzik --- drivers/ata/pata_it8172.c | 288 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 288 insertions(+) create mode 100644 drivers/ata/pata_it8172.c (limited to 'drivers/ata/pata_it8172.c') diff --git a/drivers/ata/pata_it8172.c b/drivers/ata/pata_it8172.c new file mode 100644 index 00000000000..f8367191fc7 --- /dev/null +++ b/drivers/ata/pata_it8172.c @@ -0,0 +1,288 @@ +/* + * pata_it8172.c - IT8172 PATA for new ATA layer + * (C) 2005 Red Hat Inc + * Alan Cox + * + * Based heavily on + * + * BRIEF MODULE DESCRIPTION + * IT8172 IDE controller support + * + * Copyright 2000 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * stevel@mvista.com or source@mvista.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * TODO + * Check for errata + * See if we really need to force native mode + * PIO timings (also lacking in original) + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_it8172" +#define DRV_VERSION "0.3.1" + +static int it8172_pre_reset(struct ata_port *ap) +{ + static const struct pci_bits it8172_enable_bits[] = { + { 0x00, 0, 0x00, 0x00 }, + { 0x40, 1, 0x00, 0x01 } + }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + if (ap->port_no && !pci_test_config_bits(pdev, &it8172_enable_bits[ap->port_no])) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + +static void it8172_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, it8172_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * it8172_set_pio_timing - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called by both the pio and dma setup functions to set the controller + * timings for PIO transfers. We must load both the mode number and + * timing values into the controller. + */ + +static void it8172_set_pio_timing(struct ata_port *ap, struct ata_device *adev, int pio) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u16 reg40; + + pci_read_config_word(pdev, 0x40, ®40); + + /* + * FIX! The DIOR/DIOW pulse width and recovery times in port 0x44 + * are being left at the default values of 8 PCI clocks (242 nsec + * for a 33 MHz clock). These can be safely shortened at higher + * PIO modes. The DIOR/DIOW pulse width and recovery times only + * apply to PIO modes, not to the DMA modes. + */ + + /* + * Enable port 0x44. The IT8172G spec is confused; it calls + * this register the "Slave IDE Timing Register", but in fact, + * it controls timing for both master and slave drives. + */ + + reg40 |= 0x4000; + if (adev->devno) { + reg40 &= 0xC006; + if (pio > 1) + /* Enable prefetch and IORDY sample-point */ + reg40 |= 0x0060; + } else { + reg40 &= 0xC060; + if (pio > 1) + /* Enable prefetch and IORDY sample-point */ + reg40 |= 0x0006; + } + /* Write back the enables */ + pci_write_config_word(pdev, 0x40, reg40); +} + +/** + * it8172_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the PIO mode setup. We use a shared helper for this + * as the DMA setup must also adjust the PIO timing information. + */ + +static void it8172_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + it8172_set_pio_timing(ap, adev, adev->pio_mode - XFER_PIO_0); +} + +/** + * it8172_set_dmamode - set initial DMA mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the DMA mode setup. We must tune an appropriate PIO + * mode to match. + */ + +static void it8172_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int dn = (2 * ap->port_no) + adev->devno; + u8 reg48, reg4a; + int pio; + + static const int pio_map[] = { 1, 3, 4}; + /* + * Setting the DMA cycle time to 2 or 3 PCI clocks (60 and 91 nsec + * at 33 MHz PCI clock) seems to cause BadCRC errors during DMA + * transfers on some drives, even though both numbers meet the minimum + * ATAPI-4 spec of 73 and 54 nsec for UDMA 1 and 2 respectively. + * So the faster times are just commented out here. The good news is + * that the slower cycle time has very little affect on transfer + * performance. + */ + + pci_read_config_byte(pdev, 0x48, ®48); + pci_read_config_byte(pdev, 0x4A, ®4a); + + reg4a &= ~(3 << (4 * dn)); + + if (adev->dma_mode >= XFER_UDMA_0) { + reg48 |= 1 << dn; +#ifdef UDMA_TIMING_SET + reg4a |= ((adev->dma_mode - XFER_UDMA_0) << (4 * dn)); +#endif + pio = 4; + } else { + pio = pio_map[adev->dma_mode - XFER_MW_DMA_0]; + reg48 &= ~ (1 << dn); + } + pci_write_config_byte(pdev, 0x48, reg48); + pci_write_config_byte(pdev, 0x4A, reg4a); + it8172_set_pio_timing(ap, adev, pio); + +} + +static struct scsi_host_template it8172_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations it8172_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = it8172_set_piomode, + .set_dmamode = it8172_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = it8172_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static int it8172_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static struct ata_port_info info = { + .sht = &it8172_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x06, /* No MWDMA0 support */ + .udma_mask = 0x7, + .port_ops = &it8172_port_ops + }; + static struct ata_port_info *port_info[2] = { &info, &info }; + + if ((!(PCI_FUNC(dev->devfn) & 1) || + (!((dev->class >> 8) == PCI_CLASS_STORAGE_IDE)))) + return -ENODEV; /* IT8172 is more than an IDE controller */ + + return ata_pci_init_one(dev, port_info, 2); +} + +static struct pci_device_id it8172[] = { + { PCI_DEVICE(PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_IT8172G), }, + { 0, }, +}; + +static struct pci_driver it8172_pci_driver = { + .name = DRV_NAME, + .id_table = it8172, + .probe = it8172_init_one, + .remove = ata_pci_remove_one +}; + +static int __init it8172_init(void) +{ + return pci_register_driver(&it8172_pci_driver); +} + + +static void __exit it8172_exit(void) +{ + pci_unregister_driver(&it8172_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for ITE IT8172"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, it8172); +MODULE_VERSION(DRV_VERSION); + +module_init(it8172_init); +module_exit(it8172_exit); -- cgit v1.2.3-18-g5258