From 8522ee25f3a645577d41e71328cd4fcf8610dfeb Mon Sep 17 00:00:00 2001 From: Shane Huang Date: Tue, 30 Dec 2008 11:00:37 +0800 Subject: [libata] ahci: Add SATA GEN3 related messages The present AHCI driver seems to support SATA GEN 3 speed, but the related messages should be modified. Signed-off-by: Shane Huang Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/ata/ahci.c') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 656448c7fef..6dc46210568 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -2446,6 +2446,8 @@ static void ahci_print_info(struct ata_host *host) speed_s = "1.5"; else if (speed == 2) speed_s = "3"; + else if (speed == 3) + speed_s = "6"; else speed_s = "?"; -- cgit v1.2.3-18-g5258 From e427fe042cf90c0652eed9a85e57a8fd8af89890 Mon Sep 17 00:00:00 2001 From: Shane Huang Date: Tue, 30 Dec 2008 10:53:41 +0800 Subject: [libata] ahci: Withdraw IGN_SERR_INTERNAL for SB800 SATA There is an issue in ATI SB600/SB700 SATA that PxSERR.E should not be set on some conditions, which will lead to many SATA ODD error messages. commit 55a61604cd1354e1783364e1c901034f2f474b7d is the workaround. Since SB800 fixed this HW issue, IGN_SERR_INTERNAL should be withdrawn for SB800. Signed-off-by: Shane Huang Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers/ata/ahci.c') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 6dc46210568..7f701cbe14a 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -105,7 +105,7 @@ enum { board_ahci_ign_iferr = 2, board_ahci_sb600 = 3, board_ahci_mv = 4, - board_ahci_sb700 = 5, + board_ahci_sb700 = 5, /* for SB700 and SB800 */ board_ahci_mcp65 = 6, board_ahci_nopmp = 7, @@ -439,7 +439,7 @@ static const struct ata_port_info ahci_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, - /* board_ahci_sb700 */ + /* board_ahci_sb700, for SB700 and SB800 */ { AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL), .flags = AHCI_FLAG_COMMON, @@ -2612,6 +2612,10 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) (pdev->revision == 0xa1 || pdev->revision == 0xa2)) hpriv->flags |= AHCI_HFLAG_NO_MSI; + /* SB800 does NOT need the workaround to ignore SERR_INTERNAL */ + if (board_id == board_ahci_sb700 && pdev->revision >= 0x40) + hpriv->flags &= ~AHCI_HFLAG_IGN_SERR_INTERNAL; + if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev)) pci_intx(pdev, 1); -- cgit v1.2.3-18-g5258 From 886ad09fc83342aa1c5a02a0b6d3298b78a8067f Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Fri, 9 Jan 2009 15:54:07 -0800 Subject: libata: Add a per-host flag to opt-in into parallel port probes This patch adds a per host flag that allows drivers to opt in into having its busses scanned in parallel. Drivers that do not set this flag get their ports scanned in the "original" sequence. Signed-off-by: Arjan van de Ven Signed-off-by: Linus Torvalds --- drivers/ata/ahci.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/ata/ahci.c') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 7f701cbe14a..96039671e3b 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -2660,6 +2660,9 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) host->iomap = pcim_iomap_table(pdev); host->private_data = hpriv; + if (!(hpriv->cap & HOST_CAP_SSS)) + host->flags |= ATA_HOST_PARALLEL_SCAN; + if (pi.flags & ATA_FLAG_EM) ahci_reset_em(host); -- cgit v1.2.3-18-g5258