From 9bcb8118965ab4631a65ee0726e6518f75cda6c5 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Wed, 1 Feb 2012 10:26:54 -0500 Subject: ACPI: Evaluate thermal trip points before reading temperature An HP laptop (Pavilion G4-1016tx) has the following code in _TMP: Store (\_SB.PCI0.LPCB.EC0.RTMP, Local0) If (LGreaterEqual (Local0, S4TP)) { Store (One, HTS4) } S4TP is initialised at 0 and not programmed further until either _HOT or _CRT is called. If we evaluate _TMP before the trip points then HTS4 will always be set, causing the firmware to generate a message on boot complaining that the system shut down because of overheating. The simplest solution is just to reverse the checking of trip points and _TMP in thermal init. Signed-off-by: Matthew Garrett Signed-off-by: Len Brown --- drivers/acpi/thermal.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/acpi/thermal.c') diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 48fbc647b17..7dbebea1ec3 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -941,13 +941,13 @@ static int acpi_thermal_get_info(struct acpi_thermal *tz) if (!tz) return -EINVAL; - /* Get temperature [_TMP] (required) */ - result = acpi_thermal_get_temperature(tz); + /* Get trip points [_CRT, _PSV, etc.] (required) */ + result = acpi_thermal_get_trip_points(tz); if (result) return result; - /* Get trip points [_CRT, _PSV, etc.] (required) */ - result = acpi_thermal_get_trip_points(tz); + /* Get temperature [_TMP] (required) */ + result = acpi_thermal_get_temperature(tz); if (result) return result; -- cgit v1.2.3-18-g5258