From 0016a4cf5582415849fafbf9f019dd9530824789 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Tue, 15 Jun 2010 14:48:58 +1000 Subject: powerpc: Emulate most Book I instructions in emulate_step() This extends the emulate_step() function to handle a large proportion of the Book I instructions implemented on current 64-bit server processors. The aim is to handle all the load and store instructions used in the kernel, plus all of the instructions that appear between l[wd]arx and st[wd]cx., so this handles the Altivec/VMX lvx and stvx and the VSX lxv2dx and stxv2dx instructions (implemented in POWER7). The new code can emulate user mode instructions, and checks the effective address for a load or store if the saved state is for user mode. It doesn't handle little-endian mode at present. For floating-point, Altivec/VMX and VSX instructions, it checks that the saved MSR has the enable bit for the relevant facility set, and if so, assumes that the FP/VMX/VSX registers contain valid state, and does loads or stores directly to/from the FP/VMX/VSX registers, using assembly helpers in ldstfp.S. Instructions supported now include: * Loads and stores, including some but not all VMX and VSX instructions, and lmw/stmw * Atomic loads and stores (l[dw]arx, st[dw]cx.) * Arithmetic instructions (add, subtract, multiply, divide, etc.) * Compare instructions * Rotate and mask instructions * Shift instructions * Logical instructions (and, or, xor, etc.) * Condition register logical instructions * mtcrf, cntlz[wd], exts[bhw] * isync, sync, lwsync, ptesync, eieio * Cache operations (dcbf, dcbst, dcbt, dcbtst) The overflow-checking arithmetic instructions are not included, but they appear not to be ever used in C code. This uses decimal values for the minor opcodes in the switch statements because that is what appears in the Power ISA specification, thus it is easier to check that they are correct if they are in decimal. If this is used to single-step an instruction where a data breakpoint interrupt occurred, then there is the possibility that the instruction is a lwarx or ldarx. In that case we have to be careful not to lose the reservation until we get to the matching st[wd]cx., or we'll never make forward progress. One alternative is to try to arrange that we can return from interrupts and handle data breakpoint interrupts without losing the reservation, which means not using any spinlocks, mutexes, or atomic ops (including bitops). That seems rather fragile. The other alternative is to emulate the larx/stcx and all the instructions in between. This is why this commit adds support for a wide range of integer instructions. Signed-off-by: Paul Mackerras --- arch/powerpc/include/asm/asm-compat.h | 2 + arch/powerpc/include/asm/ppc-opcode.h | 7 + arch/powerpc/lib/Makefile | 4 +- arch/powerpc/lib/ldstfp.S | 375 ++++++++ arch/powerpc/lib/sstep.c | 1514 ++++++++++++++++++++++++++++++++- 5 files changed, 1855 insertions(+), 47 deletions(-) create mode 100644 arch/powerpc/lib/ldstfp.S (limited to 'arch') diff --git a/arch/powerpc/include/asm/asm-compat.h b/arch/powerpc/include/asm/asm-compat.h index 2048a6aeea9..decad950f11 100644 --- a/arch/powerpc/include/asm/asm-compat.h +++ b/arch/powerpc/include/asm/asm-compat.h @@ -30,6 +30,7 @@ #define PPC_STLCX stringify_in_c(stdcx.) #define PPC_CNTLZL stringify_in_c(cntlzd) #define PPC_LR_STKOFF 16 +#define PPC_MIN_STKFRM 112 /* Move to CR, single-entry optimized version. Only available * on POWER4 and later. @@ -55,6 +56,7 @@ #define PPC_CNTLZL stringify_in_c(cntlzw) #define PPC_MTOCRF stringify_in_c(mtcrf) #define PPC_LR_STKOFF 4 +#define PPC_MIN_STKFRM 16 #endif diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h index d553bbeb726..43adc8b819e 100644 --- a/arch/powerpc/include/asm/ppc-opcode.h +++ b/arch/powerpc/include/asm/ppc-opcode.h @@ -52,13 +52,17 @@ #define PPC_INST_WAIT 0x7c00007c #define PPC_INST_TLBIVAX 0x7c000624 #define PPC_INST_TLBSRX_DOT 0x7c0006a5 +#define PPC_INST_XXLOR 0xf0000510 /* macros to insert fields into opcodes */ #define __PPC_RA(a) (((a) & 0x1f) << 16) #define __PPC_RB(b) (((b) & 0x1f) << 11) #define __PPC_RS(s) (((s) & 0x1f) << 21) #define __PPC_RT(s) __PPC_RS(s) +#define __PPC_XA(a) ((((a) & 0x1f) << 16) | (((a) & 0x20) >> 3)) +#define __PPC_XB(b) ((((b) & 0x1f) << 11) | (((b) & 0x20) >> 4)) #define __PPC_XS(s) ((((s) & 0x1f) << 21) | (((s) & 0x20) >> 5)) +#define __PPC_XT(s) __PPC_XS(s) #define __PPC_T_TLB(t) (((t) & 0x3) << 21) #define __PPC_WC(w) (((w) & 0x3) << 21) /* @@ -106,9 +110,12 @@ * the 128 bit load store instructions based on that. */ #define VSX_XX1(s, a, b) (__PPC_XS(s) | __PPC_RA(a) | __PPC_RB(b)) +#define VSX_XX3(t, a, b) (__PPC_XT(t) | __PPC_XA(a) | __PPC_XB(b)) #define STXVD2X(s, a, b) stringify_in_c(.long PPC_INST_STXVD2X | \ VSX_XX1((s), (a), (b))) #define LXVD2X(s, a, b) stringify_in_c(.long PPC_INST_LXVD2X | \ VSX_XX1((s), (a), (b))) +#define XXLOR(t, a, b) stringify_in_c(.long PPC_INST_XXLOR | \ + VSX_XX3((t), (a), (b))) #endif /* _ASM_POWERPC_PPC_OPCODE_H */ diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index 3040dac18a3..7581dbffa18 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -18,8 +18,8 @@ obj-$(CONFIG_HAS_IOMEM) += devres.o obj-$(CONFIG_PPC64) += copypage_64.o copyuser_64.o \ memcpy_64.o usercopy_64.o mem_64.o string.o -obj-$(CONFIG_XMON) += sstep.o -obj-$(CONFIG_KPROBES) += sstep.o +obj-$(CONFIG_XMON) += sstep.o ldstfp.o +obj-$(CONFIG_KPROBES) += sstep.o ldstfp.o ifeq ($(CONFIG_PPC64),y) obj-$(CONFIG_SMP) += locks.o diff --git a/arch/powerpc/lib/ldstfp.S b/arch/powerpc/lib/ldstfp.S new file mode 100644 index 00000000000..f6448636baf --- /dev/null +++ b/arch/powerpc/lib/ldstfp.S @@ -0,0 +1,375 @@ +/* + * Floating-point, VMX/Altivec and VSX loads and stores + * for use in instruction emulation. + * + * Copyright 2010 Paul Mackerras, IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include + +#define STKFRM (PPC_MIN_STKFRM + 16) + + .macro extab instr,handler + .section __ex_table,"a" + PPC_LONG \instr,\handler + .previous + .endm + + .macro inst32 op +reg = 0 + .rept 32 +20: \op reg,0,r4 + b 3f + extab 20b,99f +reg = reg + 1 + .endr + .endm + +/* Get the contents of frN into fr0; N is in r3. */ +_GLOBAL(get_fpr) + mflr r0 + rlwinm r3,r3,3,0xf8 + bcl 20,31,1f + blr /* fr0 is already in fr0 */ + nop +reg = 1 + .rept 31 + fmr fr0,reg + blr +reg = reg + 1 + .endr +1: mflr r5 + add r5,r3,r5 + mtctr r5 + mtlr r0 + bctr + +/* Put the contents of fr0 into frN; N is in r3. */ +_GLOBAL(put_fpr) + mflr r0 + rlwinm r3,r3,3,0xf8 + bcl 20,31,1f + blr /* fr0 is already in fr0 */ + nop +reg = 1 + .rept 31 + fmr reg,fr0 + blr +reg = reg + 1 + .endr +1: mflr r5 + add r5,r3,r5 + mtctr r5 + mtlr r0 + bctr + +/* Load FP reg N from float at *p. N is in r3, p in r4. */ +_GLOBAL(do_lfs) + PPC_STLU r1,-STKFRM(r1) + mflr r0 + PPC_STL r0,STKFRM+PPC_LR_STKOFF(r1) + mfmsr r6 + ori r7,r6,MSR_FP + cmpwi cr7,r3,0 + mtmsrd r7 + isync + beq cr7,1f + stfd fr0,STKFRM-16(r1) +1: li r9,-EFAULT +2: lfs fr0,0(r4) + li r9,0 +3: bl put_fpr + beq cr7,4f + lfd fr0,STKFRM-16(r1) +4: PPC_LL r0,STKFRM+PPC_LR_STKOFF(r1) + mtlr r0 + mtmsrd r6 + isync + mr r3,r9 + addi r1,r1,STKFRM + blr + extab 2b,3b + +/* Load FP reg N from double at *p. N is in r3, p in r4. */ +_GLOBAL(do_lfd) + PPC_STLU r1,-STKFRM(r1) + mflr r0 + PPC_STL r0,STKFRM+PPC_LR_STKOFF(r1) + mfmsr r6 + ori r7,r6,MSR_FP + cmpwi cr7,r3,0 + mtmsrd r7 + isync + beq cr7,1f + stfd fr0,STKFRM-16(r1) +1: li r9,-EFAULT +2: lfd fr0,0(r4) + li r9,0 +3: beq cr7,4f + bl put_fpr + lfd fr0,STKFRM-16(r1) +4: PPC_LL r0,STKFRM+PPC_LR_STKOFF(r1) + mtlr r0 + mtmsrd r6 + isync + mr r3,r9 + addi r1,r1,STKFRM + blr + extab 2b,3b + +/* Store FP reg N to float at *p. N is in r3, p in r4. */ +_GLOBAL(do_stfs) + PPC_STLU r1,-STKFRM(r1) + mflr r0 + PPC_STL r0,STKFRM+PPC_LR_STKOFF(r1) + mfmsr r6 + ori r7,r6,MSR_FP + cmpwi cr7,r3,0 + mtmsrd r7 + isync + beq cr7,1f + stfd fr0,STKFRM-16(r1) + bl get_fpr +1: li r9,-EFAULT +2: stfs fr0,0(r4) + li r9,0 +3: beq cr7,4f + lfd fr0,STKFRM-16(r1) +4: PPC_LL r0,STKFRM+PPC_LR_STKOFF(r1) + mtlr r0 + mtmsrd r6 + isync + mr r3,r9 + addi r1,r1,STKFRM + blr + extab 2b,3b + +/* Store FP reg N to double at *p. N is in r3, p in r4. */ +_GLOBAL(do_stfd) + PPC_STLU r1,-STKFRM(r1) + mflr r0 + PPC_STL r0,STKFRM+PPC_LR_STKOFF(r1) + mfmsr r6 + ori r7,r6,MSR_FP + cmpwi cr7,r3,0 + mtmsrd r7 + isync + beq cr7,1f + stfd fr0,STKFRM-16(r1) + bl get_fpr +1: li r9,-EFAULT +2: stfd fr0,0(r4) + li r9,0 +3: beq cr7,4f + lfd fr0,STKFRM-16(r1) +4: PPC_LL r0,STKFRM+PPC_LR_STKOFF(r1) + mtlr r0 + mtmsrd r6 + isync + mr r3,r9 + addi r1,r1,STKFRM + blr + extab 2b,3b + +#ifdef CONFIG_ALTIVEC +/* Get the contents of vrN into vr0; N is in r3. */ +_GLOBAL(get_vr) + mflr r0 + rlwinm r3,r3,3,0xf8 + bcl 20,31,1f + blr /* vr0 is already in vr0 */ + nop +reg = 1 + .rept 31 + vor vr0,reg,reg /* assembler doesn't know vmr? */ + blr +reg = reg + 1 + .endr +1: mflr r5 + add r5,r3,r5 + mtctr r5 + mtlr r0 + bctr + +/* Put the contents of vr0 into vrN; N is in r3. */ +_GLOBAL(put_vr) + mflr r0 + rlwinm r3,r3,3,0xf8 + bcl 20,31,1f + blr /* vr0 is already in vr0 */ + nop +reg = 1 + .rept 31 + vor reg,vr0,vr0 + blr +reg = reg + 1 + .endr +1: mflr r5 + add r5,r3,r5 + mtctr r5 + mtlr r0 + bctr + +/* Load vector reg N from *p. N is in r3, p in r4. */ +_GLOBAL(do_lvx) + PPC_STLU r1,-STKFRM(r1) + mflr r0 + PPC_STL r0,STKFRM+PPC_LR_STKOFF(r1) + mfmsr r6 + oris r7,r6,MSR_VEC@h + cmpwi cr7,r3,0 + li r8,STKFRM-16 + mtmsrd r7 + isync + beq cr7,1f + stvx vr0,r1,r8 +1: li r9,-EFAULT +2: lvx vr0,0,r4 + li r9,0 +3: beq cr7,4f + bl put_vr + lvx vr0,r1,r8 +4: PPC_LL r0,STKFRM+PPC_LR_STKOFF(r1) + mtlr r0 + mtmsrd r6 + isync + mr r3,r9 + addi r1,r1,STKFRM + blr + extab 2b,3b + +/* Store vector reg N to *p. N is in r3, p in r4. */ +_GLOBAL(do_stvx) + PPC_STLU r1,-STKFRM(r1) + mflr r0 + PPC_STL r0,STKFRM+PPC_LR_STKOFF(r1) + mfmsr r6 + oris r7,r6,MSR_VEC@h + cmpwi cr7,r3,0 + li r8,STKFRM-16 + mtmsrd r7 + isync + beq cr7,1f + stvx vr0,r1,r8 + bl get_vr +1: li r9,-EFAULT +2: stvx vr0,0,r4 + li r9,0 +3: beq cr7,4f + lvx vr0,r1,r8 +4: PPC_LL r0,STKFRM+PPC_LR_STKOFF(r1) + mtlr r0 + mtmsrd r6 + isync + mr r3,r9 + addi r1,r1,STKFRM + blr + extab 2b,3b +#endif /* CONFIG_ALTIVEC */ + +#ifdef CONFIG_VSX +/* Get the contents of vsrN into vsr0; N is in r3. */ +_GLOBAL(get_vsr) + mflr r0 + rlwinm r3,r3,3,0x1f8 + bcl 20,31,1f + blr /* vsr0 is already in vsr0 */ + nop +reg = 1 + .rept 63 + XXLOR(0,reg,reg) + blr +reg = reg + 1 + .endr +1: mflr r5 + add r5,r3,r5 + mtctr r5 + mtlr r0 + bctr + +/* Put the contents of vsr0 into vsrN; N is in r3. */ +_GLOBAL(put_vsr) + mflr r0 + rlwinm r3,r3,3,0x1f8 + bcl 20,31,1f + blr /* vr0 is already in vr0 */ + nop +reg = 1 + .rept 63 + XXLOR(reg,0,0) + blr +reg = reg + 1 + .endr +1: mflr r5 + add r5,r3,r5 + mtctr r5 + mtlr r0 + bctr + +/* Load VSX reg N from vector doubleword *p. N is in r3, p in r4. */ +_GLOBAL(do_lxvd2x) + PPC_STLU r1,-STKFRM(r1) + mflr r0 + PPC_STL r0,STKFRM+PPC_LR_STKOFF(r1) + mfmsr r6 + oris r7,r6,MSR_VSX@h + cmpwi cr7,r3,0 + li r8,STKFRM-16 + mtmsrd r7 + isync + beq cr7,1f + STXVD2X(0,r1,r8) +1: li r9,-EFAULT +2: LXVD2X(0,0,r4) + li r9,0 +3: beq cr7,4f + bl put_vsr + LXVD2X(0,r1,r8) +4: PPC_LL r0,STKFRM+PPC_LR_STKOFF(r1) + mtlr r0 + mtmsrd r6 + isync + mr r3,r9 + addi r1,r1,STKFRM + blr + extab 2b,3b + +/* Store VSX reg N to vector doubleword *p. N is in r3, p in r4. */ +_GLOBAL(do_stxvd2x) + PPC_STLU r1,-STKFRM(r1) + mflr r0 + PPC_STL r0,STKFRM+PPC_LR_STKOFF(r1) + mfmsr r6 + oris r7,r6,MSR_VSX@h + cmpwi cr7,r3,0 + li r8,STKFRM-16 + mtmsrd r7 + isync + beq cr7,1f + STXVD2X(0,r1,r8) + bl get_vsr +1: li r9,-EFAULT +2: STXVD2X(0,0,r4) + li r9,0 +3: beq cr7,4f + LXVD2X(0,r1,r8) +4: PPC_LL r0,STKFRM+PPC_LR_STKOFF(r1) + mtlr r0 + mtmsrd r6 + isync + mr r3,r9 + addi r1,r1,STKFRM + blr + extab 2b,3b + +#endif /* CONFIG_VSX */ diff --git a/arch/powerpc/lib/sstep.c b/arch/powerpc/lib/sstep.c index 13b7d54f185..e0a9858d537 100644 --- a/arch/powerpc/lib/sstep.c +++ b/arch/powerpc/lib/sstep.c @@ -13,6 +13,8 @@ #include #include #include +#include +#include extern char system_call_common[]; @@ -23,6 +25,23 @@ extern char system_call_common[]; #define MSR_MASK 0x87c0ffff #endif +/* Bits in XER */ +#define XER_SO 0x80000000U +#define XER_OV 0x40000000U +#define XER_CA 0x20000000U + +/* + * Functions in ldstfp.S + */ +extern int do_lfs(int rn, unsigned long ea); +extern int do_lfd(int rn, unsigned long ea); +extern int do_stfs(int rn, unsigned long ea); +extern int do_stfd(int rn, unsigned long ea); +extern int do_lvx(int rn, unsigned long ea); +extern int do_stvx(int rn, unsigned long ea); +extern int do_lxvd2x(int rn, unsigned long ea); +extern int do_stxvd2x(int rn, unsigned long ea); + /* * Determine whether a conditional branch instruction would branch. */ @@ -46,16 +65,499 @@ static int __kprobes branch_taken(unsigned int instr, struct pt_regs *regs) return 1; } + +static long __kprobes address_ok(struct pt_regs *regs, unsigned long ea, int nb) +{ + if (!user_mode(regs)) + return 1; + return __access_ok(ea, nb, USER_DS); +} + +/* + * Calculate effective address for a D-form instruction + */ +static unsigned long __kprobes dform_ea(unsigned int instr, struct pt_regs *regs) +{ + int ra; + unsigned long ea; + + ra = (instr >> 16) & 0x1f; + ea = (signed short) instr; /* sign-extend */ + if (ra) { + ea += regs->gpr[ra]; + if (instr & 0x04000000) /* update forms */ + regs->gpr[ra] = ea; + } +#ifdef __powerpc64__ + if (!(regs->msr & MSR_SF)) + ea &= 0xffffffffUL; +#endif + return ea; +} + +#ifdef __powerpc64__ +/* + * Calculate effective address for a DS-form instruction + */ +static unsigned long __kprobes dsform_ea(unsigned int instr, struct pt_regs *regs) +{ + int ra; + unsigned long ea; + + ra = (instr >> 16) & 0x1f; + ea = (signed short) (instr & ~3); /* sign-extend */ + if (ra) { + ea += regs->gpr[ra]; + if ((instr & 3) == 1) /* update forms */ + regs->gpr[ra] = ea; + } + if (!(regs->msr & MSR_SF)) + ea &= 0xffffffffUL; + return ea; +} +#endif /* __powerpc64 */ + +/* + * Calculate effective address for an X-form instruction + */ +static unsigned long __kprobes xform_ea(unsigned int instr, struct pt_regs *regs, + int do_update) +{ + int ra, rb; + unsigned long ea; + + ra = (instr >> 16) & 0x1f; + rb = (instr >> 11) & 0x1f; + ea = regs->gpr[rb]; + if (ra) { + ea += regs->gpr[ra]; + if (do_update) /* update forms */ + regs->gpr[ra] = ea; + } +#ifdef __powerpc64__ + if (!(regs->msr & MSR_SF)) + ea &= 0xffffffffUL; +#endif + return ea; +} + +/* + * Return the largest power of 2, not greater than sizeof(unsigned long), + * such that x is a multiple of it. + */ +static inline unsigned long max_align(unsigned long x) +{ + x |= sizeof(unsigned long); + return x & -x; /* isolates rightmost bit */ +} + + +static inline unsigned long byterev_2(unsigned long x) +{ + return ((x >> 8) & 0xff) | ((x & 0xff) << 8); +} + +static inline unsigned long byterev_4(unsigned long x) +{ + return ((x >> 24) & 0xff) | ((x >> 8) & 0xff00) | + ((x & 0xff00) << 8) | ((x & 0xff) << 24); +} + +#ifdef __powerpc64__ +static inline unsigned long byterev_8(unsigned long x) +{ + return (byterev_4(x) << 32) | byterev_4(x >> 32); +} +#endif + +static int __kprobes read_mem_aligned(unsigned long *dest, unsigned long ea, + int nb) +{ + int err = 0; + unsigned long x = 0; + + switch (nb) { + case 1: + err = __get_user(x, (unsigned char __user *) ea); + break; + case 2: + err = __get_user(x, (unsigned short __user *) ea); + break; + case 4: + err = __get_user(x, (unsigned int __user *) ea); + break; +#ifdef __powerpc64__ + case 8: + err = __get_user(x, (unsigned long __user *) ea); + break; +#endif + } + if (!err) + *dest = x; + return err; +} + +static int __kprobes read_mem_unaligned(unsigned long *dest, unsigned long ea, + int nb, struct pt_regs *regs) +{ + int err; + unsigned long x, b, c; + + /* unaligned, do this in pieces */ + x = 0; + for (; nb > 0; nb -= c) { + c = max_align(ea); + if (c > nb) + c = max_align(nb); + err = read_mem_aligned(&b, ea, c); + if (err) + return err; + x = (x << (8 * c)) + b; + ea += c; + } + *dest = x; + return 0; +} + +/* + * Read memory at address ea for nb bytes, return 0 for success + * or -EFAULT if an error occurred. + */ +static int __kprobes read_mem(unsigned long *dest, unsigned long ea, int nb, + struct pt_regs *regs) +{ + if (!address_ok(regs, ea, nb)) + return -EFAULT; + if ((ea & (nb - 1)) == 0) + return read_mem_aligned(dest, ea, nb); + return read_mem_unaligned(dest, ea, nb, regs); +} + +static int __kprobes write_mem_aligned(unsigned long val, unsigned long ea, + int nb) +{ + int err = 0; + + switch (nb) { + case 1: + err = __put_user(val, (unsigned char __user *) ea); + break; + case 2: + err = __put_user(val, (unsigned short __user *) ea); + break; + case 4: + err = __put_user(val, (unsigned int __user *) ea); + break; +#ifdef __powerpc64__ + case 8: + err = __put_user(val, (unsigned long __user *) ea); + break; +#endif + } + return err; +} + +static int __kprobes write_mem_unaligned(unsigned long val, unsigned long ea, + int nb, struct pt_regs *regs) +{ + int err; + unsigned long c; + + /* unaligned or little-endian, do this in pieces */ + for (; nb > 0; nb -= c) { + c = max_align(ea); + if (c > nb) + c = max_align(nb); + err = write_mem_aligned(val >> (nb - c) * 8, ea, c); + if (err) + return err; + ++ea; + } + return 0; +} + +/* + * Write memory at address ea for nb bytes, return 0 for success + * or -EFAULT if an error occurred. + */ +static int __kprobes write_mem(unsigned long val, unsigned long ea, int nb, + struct pt_regs *regs) +{ + if (!address_ok(regs, ea, nb)) + return -EFAULT; + if ((ea & (nb - 1)) == 0) + return write_mem_aligned(val, ea, nb); + return write_mem_unaligned(val, ea, nb, regs); +} + /* - * Emulate instructions that cause a transfer of control. + * Check the address and alignment, and call func to do the actual + * load or store. + */ +static int __kprobes do_fp_load(int rn, int (*func)(int, unsigned long), + unsigned long ea, int nb, + struct pt_regs *regs) +{ + int err; + unsigned long val[sizeof(double) / sizeof(long)]; + unsigned long ptr; + + if (!address_ok(regs, ea, nb)) + return -EFAULT; + if ((ea & 3) == 0) + return (*func)(rn, ea); + ptr = (unsigned long) &val[0]; + if (sizeof(unsigned long) == 8 || nb == 4) { + err = read_mem_unaligned(&val[0], ea, nb, regs); + ptr += sizeof(unsigned long) - nb; + } else { + /* reading a double on 32-bit */ + err = read_mem_unaligned(&val[0], ea, 4, regs); + if (!err) + err = read_mem_unaligned(&val[1], ea + 4, 4, regs); + } + if (err) + return err; + return (*func)(rn, ptr); +} + +static int __kprobes do_fp_store(int rn, int (*func)(int, unsigned long), + unsigned long ea, int nb, + struct pt_regs *regs) +{ + int err; + unsigned long val[sizeof(double) / sizeof(long)]; + unsigned long ptr; + + if (!address_ok(regs, ea, nb)) + return -EFAULT; + if ((ea & 3) == 0) + return (*func)(rn, ea); + ptr = (unsigned long) &val[0]; + if (sizeof(unsigned long) == 8 || nb == 4) { + ptr += sizeof(unsigned long) - nb; + err = (*func)(rn, ptr); + if (err) + return err; + err = write_mem_unaligned(val[0], ea, nb, regs); + } else { + /* writing a double on 32-bit */ + err = (*func)(rn, ptr); + if (err) + return err; + err = write_mem_unaligned(val[0], ea, 4, regs); + if (!err) + err = write_mem_unaligned(val[1], ea + 4, 4, regs); + } + return err; +} + +#ifdef CONFIG_ALTIVEC +/* For Altivec/VMX, no need to worry about alignment */ +static int __kprobes do_vec_load(int rn, int (*func)(int, unsigned long), + unsigned long ea, struct pt_regs *regs) +{ + if (!address_ok(regs, ea & ~0xfUL, 16)) + return -EFAULT; + return (*func)(rn, ea); +} + +static int __kprobes do_vec_store(int rn, int (*func)(int, unsigned long), + unsigned long ea, struct pt_regs *regs) +{ + if (!address_ok(regs, ea & ~0xfUL, 16)) + return -EFAULT; + return (*func)(rn, ea); +} +#endif /* CONFIG_ALTIVEC */ + +#ifdef CONFIG_VSX +static int __kprobes do_vsx_load(int rn, int (*func)(int, unsigned long), + unsigned long ea, struct pt_regs *regs) +{ + int err; + unsigned long val[2]; + + if (!address_ok(regs, ea, 16)) + return -EFAULT; + if ((ea & 3) == 0) + return (*func)(rn, ea); + err = read_mem_unaligned(&val[0], ea, 8, regs); + if (!err) + err = read_mem_unaligned(&val[1], ea + 8, 8, regs); + if (!err) + err = (*func)(rn, (unsigned long) &val[0]); + return err; +} + +static int __kprobes do_vsx_store(int rn, int (*func)(int, unsigned long), + unsigned long ea, struct pt_regs *regs) +{ + int err; + unsigned long val[2]; + + if (!address_ok(regs, ea, 16)) + return -EFAULT; + if ((ea & 3) == 0) + return (*func)(rn, ea); + err = (*func)(rn, (unsigned long) &val[0]); + if (err) + return err; + err = write_mem_unaligned(val[0], ea, 8, regs); + if (!err) + err = write_mem_unaligned(val[1], ea + 8, 8, regs); + return err; +} +#endif /* CONFIG_VSX */ + +#define __put_user_asmx(x, addr, err, op, cr) \ + __asm__ __volatile__( \ + "1: " op " %2,0,%3\n" \ + " mfcr %1\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3: li %0,%4\n" \ + " b 2b\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + PPC_LONG_ALIGN "\n" \ + PPC_LONG "1b,3b\n" \ + ".previous" \ + : "=r" (err), "=r" (cr) \ + : "r" (x), "r" (addr), "i" (-EFAULT), "0" (err)) + +#define __get_user_asmx(x, addr, err, op) \ + __asm__ __volatile__( \ + "1: "op" %1,0,%2\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3: li %0,%3\n" \ + " b 2b\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + PPC_LONG_ALIGN "\n" \ + PPC_LONG "1b,3b\n" \ + ".previous" \ + : "=r" (err), "=r" (x) \ + : "r" (addr), "i" (-EFAULT), "0" (err)) + +#define __cacheop_user_asmx(addr, err, op) \ + __asm__ __volatile__( \ + "1: "op" 0,%1\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3: li %0,%3\n" \ + " b 2b\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + PPC_LONG_ALIGN "\n" \ + PPC_LONG "1b,3b\n" \ + ".previous" \ + : "=r" (err) \ + : "r" (addr), "i" (-EFAULT), "0" (err)) + +static void __kprobes set_cr0(struct pt_regs *regs, int rd) +{ + long val = regs->gpr[rd]; + + regs->ccr = (regs->ccr & 0x0fffffff) | ((regs->xer >> 3) & 0x10000000); +#ifdef __powerpc64__ + if (!(regs->msr & MSR_SF)) + val = (int) val; +#endif + if (val < 0) + regs->ccr |= 0x80000000; + else if (val > 0) + regs->ccr |= 0x40000000; + else + regs->ccr |= 0x20000000; +} + +static void __kprobes add_with_carry(struct pt_regs *regs, int rd, + unsigned long val1, unsigned long val2, + unsigned long carry_in) +{ + unsigned long val = val1 + val2; + + if (carry_in) + ++val; + regs->gpr[rd] = val; +#ifdef __powerpc64__ + if (!(regs->msr & MSR_SF)) { + val = (unsigned int) val; + val1 = (unsigned int) val1; + } +#endif + if (val < val1 || (carry_in && val == val1)) + regs->xer |= XER_CA; + else + regs->xer &= ~XER_CA; +} + +static void __kprobes do_cmp_signed(struct pt_regs *regs, long v1, long v2, + int crfld) +{ + unsigned int crval, shift; + + crval = (regs->xer >> 31) & 1; /* get SO bit */ + if (v1 < v2) + crval |= 8; + else if (v1 > v2) + crval |= 4; + else + crval |= 2; + shift = (7 - crfld) * 4; + regs->ccr = (regs->ccr & ~(0xf << shift)) | (crval << shift); +} + +static void __kprobes do_cmp_unsigned(struct pt_regs *regs, unsigned long v1, + unsigned long v2, int crfld) +{ + unsigned int crval, shift; + + crval = (regs->xer >> 31) & 1; /* get SO bit */ + if (v1 < v2) + crval |= 8; + else if (v1 > v2) + crval |= 4; + else + crval |= 2; + shift = (7 - crfld) * 4; + regs->ccr = (regs->ccr & ~(0xf << shift)) | (crval << shift); +} + +/* + * Elements of 32-bit rotate and mask instructions. + */ +#define MASK32(mb, me) ((0xffffffffUL >> (mb)) + \ + ((signed long)-0x80000000L >> (me)) + ((me) >= (mb))) +#ifdef __powerpc64__ +#define MASK64_L(mb) (~0UL >> (mb)) +#define MASK64_R(me) ((signed long)-0x8000000000000000L >> (me)) +#define MASK64(mb, me) (MASK64_L(mb) + MASK64_R(me) + ((me) >= (mb))) +#define DATA32(x) (((x) & 0xffffffffUL) | (((x) & 0xffffffffUL) << 32)) +#else +#define DATA32(x) (x) +#endif +#define ROTATE(x, n) ((n) ? (((x) << (n)) | ((x) >> (8 * sizeof(long) - (n)))) : (x)) + +/* + * Emulate instructions that cause a transfer of control, + * loads and stores, and a few other instructions. * Returns 1 if the step was emulated, 0 if not, * or -1 if the instruction is one that should not be stepped, * such as an rfid, or a mtmsrd that would clear MSR_RI. */ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr) { - unsigned int opcode, rs, rb, rd, spr; + unsigned int opcode, ra, rb, rd, spr, u; unsigned long int imm; + unsigned long int val, val2; + unsigned long int ea; + unsigned int cr, mb, me, sh; + int err; + unsigned long old_ra; + long ival; opcode = instr >> 26; switch (opcode) { @@ -78,7 +580,13 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr) * entry code works. If that is changed, this will * need to be changed also. */ + if (regs->gpr[0] == 0x1ebe && + cpu_has_feature(CPU_FTR_REAL_LE)) { + regs->msr ^= MSR_LE; + goto instr_done; + } regs->gpr[9] = regs->gpr[13]; + regs->gpr[10] = MSR_KERNEL; regs->gpr[11] = regs->nip + 4; regs->gpr[12] = regs->msr & MSR_MASK; regs->gpr[13] = (unsigned long) get_paca(); @@ -102,9 +610,9 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr) regs->nip = imm; return 1; case 19: - switch (instr & 0x7fe) { - case 0x20: /* bclr */ - case 0x420: /* bcctr */ + switch ((instr >> 1) & 0x3ff) { + case 16: /* bclr */ + case 528: /* bcctr */ imm = (instr & 0x400)? regs->ctr: regs->link; regs->nip += 4; if ((regs->msr & MSR_SF) == 0) { @@ -116,30 +624,233 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr) if (branch_taken(instr, regs)) regs->nip = imm; return 1; - case 0x24: /* rfid, scary */ + + case 18: /* rfid, scary */ return -1; + + case 150: /* isync */ + isync(); + goto instr_done; + + case 33: /* crnor */ + case 129: /* crandc */ + case 193: /* crxor */ + case 225: /* crnand */ + case 257: /* crand */ + case 289: /* creqv */ + case 417: /* crorc */ + case 449: /* cror */ + ra = (instr >> 16) & 0x1f; + rb = (instr >> 11) & 0x1f; + rd = (instr >> 21) & 0x1f; + ra = (regs->ccr >> (31 - ra)) & 1; + rb = (regs->ccr >> (31 - rb)) & 1; + val = (instr >> (6 + ra * 2 + rb)) & 1; + regs->ccr = (regs->ccr & ~(1UL << (31 - rd))) | + (val << (31 - rd)); + goto instr_done; + } + break; + case 31: + switch ((instr >> 1) & 0x3ff) { + case 598: /* sync */ +#ifdef __powerpc64__ + switch ((instr >> 21) & 3) { + case 1: /* lwsync */ + asm volatile("lwsync" : : : "memory"); + goto instr_done; + case 2: /* ptesync */ + asm volatile("ptesync" : : : "memory"); + goto instr_done; + } +#endif + mb(); + goto instr_done; + + case 854: /* eieio */ + eieio(); + goto instr_done; + } + break; + } + + /* Following cases refer to regs->gpr[], so we need all regs */ + if (!FULL_REGS(regs)) + return 0; + + rd = (instr >> 21) & 0x1f; + ra = (instr >> 16) & 0x1f; + rb = (instr >> 11) & 0x1f; + + switch (opcode) { + case 7: /* mulli */ + regs->gpr[rd] = regs->gpr[ra] * (short) instr; + goto instr_done; + + case 8: /* subfic */ + imm = (short) instr; + add_with_carry(regs, rd, ~regs->gpr[ra], imm, 1); + goto instr_done; + + case 10: /* cmpli */ + imm = (unsigned short) instr; + val = regs->gpr[ra]; +#ifdef __powerpc64__ + if ((rd & 1) == 0) + val = (unsigned int) val; +#endif + do_cmp_unsigned(regs, val, imm, rd >> 2); + goto instr_done; + + case 11: /* cmpi */ + imm = (short) instr; + val = regs->gpr[ra]; +#ifdef __powerpc64__ + if ((rd & 1) == 0) + val = (int) val; +#endif + do_cmp_signed(regs, val, imm, rd >> 2); + goto instr_done; + + case 12: /* addic */ + imm = (short) instr; + add_with_carry(regs, rd, regs->gpr[ra], imm, 0); + goto instr_done; + + case 13: /* addic. */ + imm = (short) instr; + add_with_carry(regs, rd, regs->gpr[ra], imm, 0); + set_cr0(regs, rd); + goto instr_done; + + case 14: /* addi */ + imm = (short) instr; + if (ra) + imm += regs->gpr[ra]; + regs->gpr[rd] = imm; + goto instr_done; + + case 15: /* addis */ + imm = ((short) instr) << 16; + if (ra) + imm += regs->gpr[ra]; + regs->gpr[rd] = imm; + goto instr_done; + + case 20: /* rlwimi */ + mb = (instr >> 6) & 0x1f; + me = (instr >> 1) & 0x1f; + val = DATA32(regs->gpr[rd]); + imm = MASK32(mb, me); + regs->gpr[ra] = (regs->gpr[ra] & ~imm) | (ROTATE(val, rb) & imm); + goto logical_done; + + case 21: /* rlwinm */ + mb = (instr >> 6) & 0x1f; + me = (instr >> 1) & 0x1f; + val = DATA32(regs->gpr[rd]); + regs->gpr[ra] = ROTATE(val, rb) & MASK32(mb, me); + goto logical_done; + + case 23: /* rlwnm */ + mb = (instr >> 6) & 0x1f; + me = (instr >> 1) & 0x1f; + rb = regs->gpr[rb] & 0x1f; + val = DATA32(regs->gpr[rd]); + regs->gpr[ra] = ROTATE(val, rb) & MASK32(mb, me); + goto logical_done; + + case 24: /* ori */ + imm = (unsigned short) instr; + regs->gpr[ra] = regs->gpr[rd] | imm; + goto instr_done; + + case 25: /* oris */ + imm = (unsigned short) instr; + regs->gpr[ra] = regs->gpr[rd] | (imm << 16); + goto instr_done; + + case 26: /* xori */ + imm = (unsigned short) instr; + regs->gpr[ra] = regs->gpr[rd] ^ imm; + goto instr_done; + + case 27: /* xoris */ + imm = (unsigned short) instr; + regs->gpr[ra] = regs->gpr[rd] ^ (imm << 16); + goto instr_done; + + case 28: /* andi. */ + imm = (unsigned short) instr; + regs->gpr[ra] = regs->gpr[rd] & imm; + set_cr0(regs, ra); + goto instr_done; + + case 29: /* andis. */ + imm = (unsigned short) instr; + regs->gpr[ra] = regs->gpr[rd] & (imm << 16); + set_cr0(regs, ra); + goto instr_done; + +#ifdef __powerpc64__ + case 30: /* rld* */ + mb = ((instr >> 6) & 0x1f) | (instr & 0x20); + val = regs->gpr[rd]; + if ((instr & 0x10) == 0) { + sh = rb | ((instr & 2) << 4); + val = ROTATE(val, sh); + switch ((instr >> 2) & 3) { + case 0: /* rldicl */ + regs->gpr[ra] = val & MASK64_L(mb); + goto logical_done; + case 1: /* rldicr */ + regs->gpr[ra] = val & MASK64_R(mb); + goto logical_done; + case 2: /* rldic */ + regs->gpr[ra] = val & MASK64(mb, 63 - sh); + goto logical_done; + case 3: /* rldimi */ + imm = MASK64(mb, 63 - sh); + regs->gpr[ra] = (regs->gpr[ra] & ~imm) | + (val & imm); + goto logical_done; + } + } else { + sh = regs->gpr[rb] & 0x3f; + val = ROTATE(val, sh); + switch ((instr >> 1) & 7) { + case 0: /* rldcl */ + regs->gpr[ra] = val & MASK64_L(mb); + goto logical_done; + case 1: /* rldcr */ + regs->gpr[ra] = val & MASK64_R(mb); + goto logical_done; + } } +#endif + case 31: - rd = (instr >> 21) & 0x1f; - switch (instr & 0x7fe) { - case 0xa6: /* mfmsr */ + switch ((instr >> 1) & 0x3ff) { + case 83: /* mfmsr */ + if (regs->msr & MSR_PR) + break; regs->gpr[rd] = regs->msr & MSR_MASK; - regs->nip += 4; - if ((regs->msr & MSR_SF) == 0) - regs->nip &= 0xffffffffUL; - return 1; - case 0x124: /* mtmsr */ + goto instr_done; + case 146: /* mtmsr */ + if (regs->msr & MSR_PR) + break; imm = regs->gpr[rd]; if ((imm & MSR_RI) == 0) /* can't step mtmsr that would clear MSR_RI */ return -1; regs->msr = imm; - regs->nip += 4; - return 1; + goto instr_done; #ifdef CONFIG_PPC64 - case 0x164: /* mtmsrd */ + case 178: /* mtmsrd */ /* only MSR_EE and MSR_RI get changed if bit 15 set */ /* mtmsrd doesn't change MSR_HV and MSR_ME */ + if (regs->msr & MSR_PR) + break; imm = (instr & 0x10000)? 0x8002: 0xefffffffffffefffUL; imm = (regs->msr & MSR_MASK & ~imm) | (regs->gpr[rd] & imm); @@ -147,57 +858,770 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr) /* can't step mtmsrd that would clear MSR_RI */ return -1; regs->msr = imm; - regs->nip += 4; - if ((imm & MSR_SF) == 0) - regs->nip &= 0xffffffffUL; - return 1; + goto instr_done; #endif - case 0x26: /* mfcr */ + case 19: /* mfcr */ regs->gpr[rd] = regs->ccr; regs->gpr[rd] &= 0xffffffffUL; - goto mtspr_out; - case 0x2a6: /* mfspr */ + goto instr_done; + + case 144: /* mtcrf */ + imm = 0xf0000000UL; + val = regs->gpr[rd]; + for (sh = 0; sh < 8; ++sh) { + if (instr & (0x80000 >> sh)) + regs->ccr = (regs->ccr & ~imm) | + (val & imm); + imm >>= 4; + } + goto instr_done; + + case 339: /* mfspr */ spr = (instr >> 11) & 0x3ff; switch (spr) { case 0x20: /* mfxer */ regs->gpr[rd] = regs->xer; regs->gpr[rd] &= 0xffffffffUL; - goto mtspr_out; + goto instr_done; case 0x100: /* mflr */ regs->gpr[rd] = regs->link; - goto mtspr_out; + goto instr_done; case 0x120: /* mfctr */ regs->gpr[rd] = regs->ctr; - goto mtspr_out; - } - break; - case 0x378: /* orx */ - if (instr & 1) - break; - rs = (instr >> 21) & 0x1f; - rb = (instr >> 11) & 0x1f; - if (rs == rb) { /* mr */ - rd = (instr >> 16) & 0x1f; - regs->gpr[rd] = regs->gpr[rs]; - goto mtspr_out; + goto instr_done; } break; - case 0x3a6: /* mtspr */ + + case 467: /* mtspr */ spr = (instr >> 11) & 0x3ff; switch (spr) { case 0x20: /* mtxer */ regs->xer = (regs->gpr[rd] & 0xffffffffUL); - goto mtspr_out; + goto instr_done; case 0x100: /* mtlr */ regs->link = regs->gpr[rd]; - goto mtspr_out; + goto instr_done; case 0x120: /* mtctr */ regs->ctr = regs->gpr[rd]; -mtspr_out: - regs->nip += 4; - return 1; + goto instr_done; } + break; + +/* + * Compare instructions + */ + case 0: /* cmp */ + val = regs->gpr[ra]; + val2 = regs->gpr[rb]; +#ifdef __powerpc64__ + if ((rd & 1) == 0) { + /* word (32-bit) compare */ + val = (int) val; + val2 = (int) val2; + } +#endif + do_cmp_signed(regs, val, val2, rd >> 2); + goto instr_done; + + case 32: /* cmpl */ + val = regs->gpr[ra]; + val2 = regs->gpr[rb]; +#ifdef __powerpc64__ + if ((rd & 1) == 0) { + /* word (32-bit) compare */ + val = (unsigned int) val; + val2 = (unsigned int) val2; + } +#endif + do_cmp_unsigned(regs, val, val2, rd >> 2); + goto instr_done; + +/* + * Arithmetic instructions + */ + case 8: /* subfc */ + add_with_carry(regs, rd, ~regs->gpr[ra], + regs->gpr[rb], 1); + goto arith_done; +#ifdef __powerpc64__ + case 9: /* mulhdu */ + asm("mulhdu %0,%1,%2" : "=r" (regs->gpr[rd]) : + "r" (regs->gpr[ra]), "r" (regs->gpr[rb])); + goto arith_done; +#endif + case 10: /* addc */ + add_with_carry(regs, rd, regs->gpr[ra], + regs->gpr[rb], 0); + goto arith_done; + + case 11: /* mulhwu */ + asm("mulhwu %0,%1,%2" : "=r" (regs->gpr[rd]) : + "r" (regs->gpr[ra]), "r" (regs->gpr[rb])); + goto arith_done; + + case 40: /* subf */ + regs->gpr[rd] = regs->gpr[rb] - regs->gpr[ra]; + goto arith_done; +#ifdef __powerpc64__ + case 73: /* mulhd */ + asm("mulhd %0,%1,%2" : "=r" (regs->gpr[rd]) : + "r" (regs->gpr[ra]), "r" (regs->gpr[rb])); + goto arith_done; +#endif + case 75: /* mulhw */ + asm("mulhw %0,%1,%2" : "=r" (regs->gpr[rd]) : + "r" (regs->gpr[ra]), "r" (regs->gpr[rb])); + goto arith_done; + + case 104: /* neg */ + regs->gpr[rd] = -regs->gpr[ra]; + goto arith_done; + + case 136: /* subfe */ + add_with_carry(regs, rd, ~regs->gpr[ra], regs->gpr[rb], + regs->xer & XER_CA); + goto arith_done; + + case 138: /* adde */ + add_with_carry(regs, rd, regs->gpr[ra], regs->gpr[rb], + regs->xer & XER_CA); + goto arith_done; + + case 200: /* subfze */ + add_with_carry(regs, rd, ~regs->gpr[ra], 0L, + regs->xer & XER_CA); + goto arith_done; + + case 202: /* addze */ + add_with_carry(regs, rd, regs->gpr[ra], 0L, + regs->xer & XER_CA); + goto arith_done; + + case 232: /* subfme */ + add_with_carry(regs, rd, ~regs->gpr[ra], -1L, + regs->xer & XER_CA); + goto arith_done; +#ifdef __powerpc64__ + case 233: /* mulld */ + regs->gpr[rd] = regs->gpr[ra] * regs->gpr[rb]; + goto arith_done; +#endif + case 234: /* addme */ + add_with_carry(regs, rd, regs->gpr[ra], -1L, + regs->xer & XER_CA); + goto arith_done; + + case 235: /* mullw */ + regs->gpr[rd] = (unsigned int) regs->gpr[ra] * + (unsigned int) regs->gpr[rb]; + goto arith_done; + + case 266: /* add */ + regs->gpr[rd] = regs->gpr[ra] + regs->gpr[rb]; + goto arith_done; +#ifdef __powerpc64__ + case 457: /* divdu */ + regs->gpr[rd] = regs->gpr[ra] / regs->gpr[rb]; + goto arith_done; +#endif + case 459: /* divwu */ + regs->gpr[rd] = (unsigned int) regs->gpr[ra] / + (unsigned int) regs->gpr[rb]; + goto arith_done; +#ifdef __powerpc64__ + case 489: /* divd */ + regs->gpr[rd] = (long int) regs->gpr[ra] / + (long int) regs->gpr[rb]; + goto arith_done; +#endif + case 491: /* divw */ + regs->gpr[rd] = (int) regs->gpr[ra] / + (int) regs->gpr[rb]; + goto arith_done; + + +/* + * Logical instructions + */ + case 26: /* cntlzw */ + asm("cntlzw %0,%1" : "=r" (regs->gpr[ra]) : + "r" (regs->gpr[rd])); + goto logical_done; +#ifdef __powerpc64__ + case 58: /* cntlzd */ + asm("cntlzd %0,%1" : "=r" (regs->gpr[ra]) : + "r" (regs->gpr[rd])); + goto logical_done; +#endif + case 28: /* and */ + regs->gpr[ra] = regs->gpr[rd] & regs->gpr[rb]; + goto logical_done; + + case 60: /* andc */ + regs->gpr[ra] = regs->gpr[rd] & ~regs->gpr[rb]; + goto logical_done; + + case 124: /* nor */ + regs->gpr[ra] = ~(regs->gpr[rd] | regs->gpr[rb]); + goto logical_done; + + case 284: /* xor */ + regs->gpr[ra] = ~(regs->gpr[rd] ^ regs->gpr[rb]); + goto logical_done; + + case 316: /* xor */ + regs->gpr[ra] = regs->gpr[rd] ^ regs->gpr[rb]; + goto logical_done; + + case 412: /* orc */ + regs->gpr[ra] = regs->gpr[rd] | ~regs->gpr[rb]; + goto logical_done; + + case 444: /* or */ + regs->gpr[ra] = regs->gpr[rd] | regs->gpr[rb]; + goto logical_done; + + case 476: /* nand */ + regs->gpr[ra] = ~(regs->gpr[rd] & regs->gpr[rb]); + goto logical_done; + + case 922: /* extsh */ + regs->gpr[ra] = (signed short) regs->gpr[rd]; + goto logical_done; + + case 954: /* extsb */ + regs->gpr[ra] = (signed char) regs->gpr[rd]; + goto logical_done; +#ifdef __powerpc64__ + case 986: /* extsw */ + regs->gpr[ra] = (signed int) regs->gpr[rd]; + goto logical_done; +#endif + +/* + * Shift instructions + */ + case 24: /* slw */ + sh = regs->gpr[rb] & 0x3f; + if (sh < 32) + regs->gpr[ra] = (regs->gpr[rd] << sh) & 0xffffffffUL; + else + regs->gpr[ra] = 0; + goto logical_done; + + case 536: /* srw */ + sh = regs->gpr[rb] & 0x3f; + if (sh < 32) + regs->gpr[ra] = (regs->gpr[rd] & 0xffffffffUL) >> sh; + else + regs->gpr[ra] = 0; + goto logical_done; + + case 792: /* sraw */ + sh = regs->gpr[rb] & 0x3f; + ival = (signed int) regs->gpr[rd]; + regs->gpr[ra] = ival >> (sh < 32 ? sh : 31); + if (ival < 0 && (sh >= 32 || (ival & ((1 << sh) - 1)) != 0)) + regs->xer |= XER_CA; + else + regs->xer &= ~XER_CA; + goto logical_done; + + case 824: /* srawi */ + sh = rb; + ival = (signed int) regs->gpr[rd]; + regs->gpr[ra] = ival >> sh; + if (ival < 0 && (ival & ((1 << sh) - 1)) != 0) + regs->xer |= XER_CA; + else + regs->xer &= ~XER_CA; + goto logical_done; + +#ifdef __powerpc64__ + case 27: /* sld */ + sh = regs->gpr[rd] & 0x7f; + if (sh < 64) + regs->gpr[ra] = regs->gpr[rd] << sh; + else + regs->gpr[ra] = 0; + goto logical_done; + + case 539: /* srd */ + sh = regs->gpr[rb] & 0x7f; + if (sh < 64) + regs->gpr[ra] = regs->gpr[rd] >> sh; + else + regs->gpr[ra] = 0; + goto logical_done; + + case 794: /* srad */ + sh = regs->gpr[rb] & 0x7f; + ival = (signed long int) regs->gpr[rd]; + regs->gpr[ra] = ival >> (sh < 64 ? sh : 63); + if (ival < 0 && (sh >= 64 || (ival & ((1 << sh) - 1)) != 0)) + regs->xer |= XER_CA; + else + regs->xer &= ~XER_CA; + goto logical_done; + + case 826: /* sradi with sh_5 = 0 */ + case 827: /* sradi with sh_5 = 1 */ + sh = rb | ((instr & 2) << 4); + ival = (signed long int) regs->gpr[rd]; + regs->gpr[ra] = ival >> sh; + if (ival < 0 && (ival & ((1 << sh) - 1)) != 0) + regs->xer |= XER_CA; + else + regs->xer &= ~XER_CA; + goto logical_done; +#endif /* __powerpc64__ */ + +/* + * Cache instructions + */ + case 54: /* dcbst */ + ea = xform_ea(instr, regs, 0); + if (!address_ok(regs, ea, 8)) + return 0; + err = 0; + __cacheop_user_asmx(ea, err, "dcbst"); + if (err) + return 0; + goto instr_done; + + case 86: /* dcbf */ + ea = xform_ea(instr, regs, 0); + if (!address_ok(regs, ea, 8)) + return 0; + err = 0; + __cacheop_user_asmx(ea, err, "dcbf"); + if (err) + return 0; + goto instr_done; + + case 246: /* dcbtst */ + if (rd == 0) { + ea = xform_ea(instr, regs, 0); + prefetchw((void *) ea); + } + goto instr_done; + + case 278: /* dcbt */ + if (rd == 0) { + ea = xform_ea(instr, regs, 0); + prefetch((void *) ea); + } + goto instr_done; + } + break; } - return 0; + + /* + * Following cases are for loads and stores, so bail out + * if we're in little-endian mode. + */ + if (regs->msr & MSR_LE) + return 0; + + /* + * Save register RA in case it's an update form load or store + * and the access faults. + */ + old_ra = regs->gpr[ra]; + + switch (opcode) { + case 31: + u = instr & 0x40; + switch ((instr >> 1) & 0x3ff) { + case 20: /* lwarx */ + ea = xform_ea(instr, regs, 0); + if (ea & 3) + break; /* can't handle misaligned */ + err = -EFAULT; + if (!address_ok(regs, ea, 4)) + goto ldst_done; + err = 0; + __get_user_asmx(val, ea, err, "lwarx"); + if (!err) + regs->gpr[rd] = val; + goto ldst_done; + + case 150: /* stwcx. */ + ea = xform_ea(instr, regs, 0); + if (ea & 3) + break; /* can't handle misaligned */ + err = -EFAULT; + if (!address_ok(regs, ea, 4)) + goto ldst_done; + err = 0; + __put_user_asmx(regs->gpr[rd], ea, err, "stwcx.", cr); + if (!err) + regs->ccr = (regs->ccr & 0x0fffffff) | + (cr & 0xe0000000) | + ((regs->xer >> 3) & 0x10000000); + goto ldst_done; + +#ifdef __powerpc64__ + case 84: /* ldarx */ + ea = xform_ea(instr, regs, 0); + if (ea & 7) + break; /* can't handle misaligned */ + err = -EFAULT; + if (!address_ok(regs, ea, 8)) + goto ldst_done; + err = 0; + __get_user_asmx(val, ea, err, "ldarx"); + if (!err) + regs->gpr[rd] = val; + goto ldst_done; + + case 214: /* stdcx. */ + ea = xform_ea(instr, regs, 0); + if (ea & 7) + break; /* can't handle misaligned */ + err = -EFAULT; + if (!address_ok(regs, ea, 8)) + goto ldst_done; + err = 0; + __put_user_asmx(regs->gpr[rd], ea, err, "stdcx.", cr); + if (!err) + regs->ccr = (regs->ccr & 0x0fffffff) | + (cr & 0xe0000000) | + ((regs->xer >> 3) & 0x10000000); + goto ldst_done; + + case 21: /* ldx */ + case 53: /* ldux */ + err = read_mem(®s->gpr[rd], xform_ea(instr, regs, u), + 8, regs); + goto ldst_done; +#endif + + case 23: /* lwzx */ + case 55: /* lwzux */ + err = read_mem(®s->gpr[rd], xform_ea(instr, regs, u), + 4, regs); + goto ldst_done; + + case 87: /* lbzx */ + case 119: /* lbzux */ + err = read_mem(®s->gpr[rd], xform_ea(instr, regs, u), + 1, regs); + goto ldst_done; + +#ifdef CONFIG_ALTIVEC + case 103: /* lvx */ + case 359: /* lvxl */ + if (!(regs->msr & MSR_VEC)) + break; + ea = xform_ea(instr, regs, 0); + err = do_vec_load(rd, do_lvx, ea, regs); + goto ldst_done; + + case 231: /* stvx */ + case 487: /* stvxl */ + if (!(regs->msr & MSR_VEC)) + break; + ea = xform_ea(instr, regs, 0); + err = do_vec_store(rd, do_stvx, ea, regs); + goto ldst_done; +#endif /* CONFIG_ALTIVEC */ + +#ifdef __powerpc64__ + case 149: /* stdx */ + case 181: /* stdux */ + val = regs->gpr[rd]; + err = write_mem(val, xform_ea(instr, regs, u), 8, regs); + goto ldst_done; +#endif + + case 151: /* stwx */ + case 183: /* stwux */ + val = regs->gpr[rd]; + err = write_mem(val, xform_ea(instr, regs, u), 4, regs); + goto ldst_done; + + case 215: /* stbx */ + case 247: /* stbux */ + val = regs->gpr[rd]; + err = write_mem(val, xform_ea(instr, regs, u), 1, regs); + goto ldst_done; + + case 279: /* lhzx */ + case 311: /* lhzux */ + err = read_mem(®s->gpr[rd], xform_ea(instr, regs, u), + 2, regs); + goto ldst_done; + +#ifdef __powerpc64__ + case 341: /* lwax */ + case 373: /* lwaux */ + err = read_mem(®s->gpr[rd], xform_ea(instr, regs, u), + 4, regs); + if (!err) + regs->gpr[rd] = (signed int) regs->gpr[rd]; + goto ldst_done; +#endif + + case 343: /* lhax */ + case 375: /* lhaux */ + err = read_mem(®s->gpr[rd], xform_ea(instr, regs, u), + 2, regs); + if (!err) + regs->gpr[rd] = (signed short) regs->gpr[rd]; + goto ldst_done; + + case 407: /* sthx */ + case 439: /* sthux */ + val = regs->gpr[rd]; + err = write_mem(val, xform_ea(instr, regs, u), 2, regs); + goto ldst_done; + +#ifdef __powerpc64__ + case 532: /* ldbrx */ + err = read_mem(&val, xform_ea(instr, regs, 0), 8, regs); + if (!err) + regs->gpr[rd] = byterev_8(val); + goto ldst_done; + +#endif + + case 534: /* lwbrx */ + err = read_mem(&val, xform_ea(instr, regs, 0), 4, regs); + if (!err) + regs->gpr[rd] = byterev_4(val); + goto ldst_done; + + case 535: /* lfsx */ + case 567: /* lfsux */ + if (!(regs->msr & MSR_FP)) + break; + ea = xform_ea(instr, regs, u); + err = do_fp_load(rd, do_lfs, ea, 4, regs); + goto ldst_done; + + case 599: /* lfdx */ + case 631: /* lfdux */ + if (!(regs->msr & MSR_FP)) + break; + ea = xform_ea(instr, regs, u); + err = do_fp_load(rd, do_lfd, ea, 8, regs); + goto ldst_done; + + case 663: /* stfsx */ + case 695: /* stfsux */ + if (!(regs->msr & MSR_FP)) + break; + ea = xform_ea(instr, regs, u); + err = do_fp_store(rd, do_stfs, ea, 4, regs); + goto ldst_done; + + case 727: /* stfdx */ + case 759: /* stfdux */ + if (!(regs->msr & MSR_FP)) + break; + ea = xform_ea(instr, regs, u); + err = do_fp_store(rd, do_stfd, ea, 8, regs); + goto ldst_done; + +#ifdef __powerpc64__ + case 660: /* stdbrx */ + val = byterev_8(regs->gpr[rd]); + err = write_mem(val, xform_ea(instr, regs, 0), 8, regs); + goto ldst_done; + +#endif + case 662: /* stwbrx */ + val = byterev_4(regs->gpr[rd]); + err = write_mem(val, xform_ea(instr, regs, 0), 4, regs); + goto ldst_done; + + case 790: /* lhbrx */ + err = read_mem(&val, xform_ea(instr, regs, 0), 2, regs); + if (!err) + regs->gpr[rd] = byterev_2(val); + goto ldst_done; + + case 918: /* sthbrx */ + val = byterev_2(regs->gpr[rd]); + err = write_mem(val, xform_ea(instr, regs, 0), 2, regs); + goto ldst_done; + +#ifdef CONFIG_VSX + case 844: /* lxvd2x */ + case 876: /* lxvd2ux */ + if (!(regs->msr & MSR_VSX)) + break; + rd |= (instr & 1) << 5; + ea = xform_ea(instr, regs, u); + err = do_vsx_load(rd, do_lxvd2x, ea, regs); + goto ldst_done; + + case 972: /* stxvd2x */ + case 1004: /* stxvd2ux */ + if (!(regs->msr & MSR_VSX)) + break; + rd |= (instr & 1) << 5; + ea = xform_ea(instr, regs, u); + err = do_vsx_store(rd, do_stxvd2x, ea, regs); + goto ldst_done; + +#endif /* CONFIG_VSX */ + } + break; + + case 32: /* lwz */ + case 33: /* lwzu */ + err = read_mem(®s->gpr[rd], dform_ea(instr, regs), 4, regs); + goto ldst_done; + + case 34: /* lbz */ + case 35: /* lbzu */ + err = read_mem(®s->gpr[rd], dform_ea(instr, regs), 1, regs); + goto ldst_done; + + case 36: /* stw */ + case 37: /* stwu */ + val = regs->gpr[rd]; + err = write_mem(val, dform_ea(instr, regs), 4, regs); + goto ldst_done; + + case 38: /* stb */ + case 39: /* stbu */ + val = regs->gpr[rd]; + err = write_mem(val, dform_ea(instr, regs), 1, regs); + goto ldst_done; + + case 40: /* lhz */ + case 41: /* lhzu */ + err = read_mem(®s->gpr[rd], dform_ea(instr, regs), 2, regs); + goto ldst_done; + + case 42: /* lha */ + case 43: /* lhau */ + err = read_mem(®s->gpr[rd], dform_ea(instr, regs), 2, regs); + if (!err) + regs->gpr[rd] = (signed short) regs->gpr[rd]; + goto ldst_done; + + case 44: /* sth */ + case 45: /* sthu */ + val = regs->gpr[rd]; + err = write_mem(val, dform_ea(instr, regs), 2, regs); + goto ldst_done; + + case 46: /* lmw */ + ra = (instr >> 16) & 0x1f; + if (ra >= rd) + break; /* invalid form, ra in range to load */ + ea = dform_ea(instr, regs); + do { + err = read_mem(®s->gpr[rd], ea, 4, regs); + if (err) + return 0; + ea += 4; + } while (++rd < 32); + goto instr_done; + + case 47: /* stmw */ + ea = dform_ea(instr, regs); + do { + err = write_mem(regs->gpr[rd], ea, 4, regs); + if (err) + return 0; + ea += 4; + } while (++rd < 32); + goto instr_done; + + case 48: /* lfs */ + case 49: /* lfsu */ + if (!(regs->msr & MSR_FP)) + break; + ea = dform_ea(instr, regs); + err = do_fp_load(rd, do_lfs, ea, 4, regs); + goto ldst_done; + + case 50: /* lfd */ + case 51: /* lfdu */ + if (!(regs->msr & MSR_FP)) + break; + ea = dform_ea(instr, regs); + err = do_fp_load(rd, do_lfd, ea, 8, regs); + goto ldst_done; + + case 52: /* stfs */ + case 53: /* stfsu */ + if (!(regs->msr & MSR_FP)) + break; + ea = dform_ea(instr, regs); + err = do_fp_store(rd, do_stfs, ea, 4, regs); + goto ldst_done; + + case 54: /* stfd */ + case 55: /* stfdu */ + if (!(regs->msr & MSR_FP)) + break; + ea = dform_ea(instr, regs); + err = do_fp_store(rd, do_stfd, ea, 8, regs); + goto ldst_done; + +#ifdef __powerpc64__ + case 58: /* ld[u], lwa */ + switch (instr & 3) { + case 0: /* ld */ + err = read_mem(®s->gpr[rd], dsform_ea(instr, regs), + 8, regs); + goto ldst_done; + case 1: /* ldu */ + err = read_mem(®s->gpr[rd], dsform_ea(instr, regs), + 8, regs); + goto ldst_done; + case 2: /* lwa */ + err = read_mem(®s->gpr[rd], dsform_ea(instr, regs), + 4, regs); + if (!err) + regs->gpr[rd] = (signed int) regs->gpr[rd]; + goto ldst_done; + } + break; + + case 62: /* std[u] */ + val = regs->gpr[rd]; + switch (instr & 3) { + case 0: /* std */ + err = write_mem(val, dsform_ea(instr, regs), 8, regs); + goto ldst_done; + case 1: /* stdu */ + err = write_mem(val, dsform_ea(instr, regs), 8, regs); + goto ldst_done; + } + break; +#endif /* __powerpc64__ */ + + } + err = -EINVAL; + + ldst_done: + if (err) { + regs->gpr[ra] = old_ra; + return 0; /* invoke DSI if -EFAULT? */ + } + instr_done: + regs->nip += 4; +#ifdef __powerpc64__ + if ((regs->msr & MSR_SF) == 0) + regs->nip &= 0xffffffffUL; +#endif + return 1; + + logical_done: + if (instr & 1) + set_cr0(regs, ra); + goto instr_done; + + arith_done: + if (instr & 1) + set_cr0(regs, rd); + goto instr_done; } -- cgit v1.2.3-18-g5258 From 5aae8a53708025d4e718f0d2e7c2f766779ddc71 Mon Sep 17 00:00:00 2001 From: "K.Prasad" Date: Tue, 15 Jun 2010 11:35:19 +0530 Subject: powerpc, hw_breakpoints: Implement hw_breakpoints for 64-bit server processors Implement perf-events based hw-breakpoint interfaces for PowerPC 64-bit server (Book III S) processors. This allows access to a given location to be used as an event that can be counted or profiled by the perf_events subsystem. This is done using the DABR (data breakpoint register), which can also be used for process debugging via ptrace. When perf_event hw_breakpoint support is configured in, the perf_event subsystem manages the DABR and arbitrates access to it, and ptrace then creates a perf_event when it is requested to set a data breakpoint. [Adopted suggestions from Paul Mackerras to - emulate_step() all system-wide breakpoints and single-step only the per-task breakpoints - perform arch-specific cleanup before unregistration through arch_unregister_hw_breakpoint() ] Signed-off-by: K.Prasad Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 1 + arch/powerpc/include/asm/cputable.h | 4 + arch/powerpc/include/asm/hw_breakpoint.h | 73 +++++++ arch/powerpc/include/asm/processor.h | 8 + arch/powerpc/kernel/Makefile | 1 + arch/powerpc/kernel/exceptions-64s.S | 1 + arch/powerpc/kernel/hw_breakpoint.c | 325 +++++++++++++++++++++++++++++++ arch/powerpc/kernel/machine_kexec_64.c | 3 + arch/powerpc/kernel/process.c | 14 ++ arch/powerpc/kernel/ptrace.c | 64 ++++++ arch/powerpc/lib/Makefile | 1 + 11 files changed, 495 insertions(+) create mode 100644 arch/powerpc/include/asm/hw_breakpoint.h create mode 100644 arch/powerpc/kernel/hw_breakpoint.c (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 328774bd41e..7949afc861d 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -141,6 +141,7 @@ config PPC select GENERIC_ATOMIC64 if PPC32 select HAVE_PERF_EVENTS select HAVE_REGS_AND_STACK_ACCESS_API + select HAVE_HW_BREAKPOINT if PERF_EVENTS && PPC_BOOK3S_64 config EARLY_PRINTK bool diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h index b0b21134f61..5e2e2cfcc81 100644 --- a/arch/powerpc/include/asm/cputable.h +++ b/arch/powerpc/include/asm/cputable.h @@ -517,6 +517,10 @@ static inline int cpu_has_feature(unsigned long feature) & feature); } +#ifdef CONFIG_HAVE_HW_BREAKPOINT +#define HBP_NUM 1 +#endif /* CONFIG_HAVE_HW_BREAKPOINT */ + #endif /* !__ASSEMBLY__ */ #endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/hw_breakpoint.h b/arch/powerpc/include/asm/hw_breakpoint.h new file mode 100644 index 00000000000..b111713b593 --- /dev/null +++ b/arch/powerpc/include/asm/hw_breakpoint.h @@ -0,0 +1,73 @@ +/* + * PowerPC BookIII S hardware breakpoint definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright 2010, IBM Corporation. + * Author: K.Prasad + * + */ + +#ifndef _PPC_BOOK3S_64_HW_BREAKPOINT_H +#define _PPC_BOOK3S_64_HW_BREAKPOINT_H + +#ifdef __KERNEL__ +#ifdef CONFIG_HAVE_HW_BREAKPOINT + +struct arch_hw_breakpoint { + u8 len; /* length of the target data symbol */ + int type; + unsigned long address; +}; + +#include +#include +#include + +static inline int hw_breakpoint_slots(int type) +{ + return HBP_NUM; +} +struct perf_event; +struct pmu; +struct perf_sample_data; + +#define HW_BREAKPOINT_ALIGN 0x7 +/* Maximum permissible length of any HW Breakpoint */ +#define HW_BREAKPOINT_LEN 0x8 + +extern int arch_bp_generic_fields(int type, int *gen_bp_type); +extern int arch_check_bp_in_kernelspace(struct perf_event *bp); +extern int arch_validate_hwbkpt_settings(struct perf_event *bp); +extern int hw_breakpoint_exceptions_notify(struct notifier_block *unused, + unsigned long val, void *data); +int arch_install_hw_breakpoint(struct perf_event *bp); +void arch_uninstall_hw_breakpoint(struct perf_event *bp); +void hw_breakpoint_pmu_read(struct perf_event *bp); +extern void flush_ptrace_hw_breakpoint(struct task_struct *tsk); + +extern struct pmu perf_ops_bp; +extern void ptrace_triggered(struct perf_event *bp, int nmi, + struct perf_sample_data *data, struct pt_regs *regs); +static inline void hw_breakpoint_disable(void) +{ + set_dabr(0); +} + +#else /* CONFIG_HAVE_HW_BREAKPOINT */ +static inline void hw_breakpoint_disable(void) { } +#endif /* CONFIG_HAVE_HW_BREAKPOINT */ +#endif /* __KERNEL__ */ +#endif /* _PPC_BOOK3S_64_HW_BREAKPOINT_H */ diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 7492fe8ad6e..19c05b0f74b 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -209,6 +209,14 @@ struct thread_struct { #ifdef CONFIG_PPC64 unsigned long start_tb; /* Start purr when proc switched in */ unsigned long accum_tb; /* Total accumilated purr for process */ +#ifdef CONFIG_HAVE_HW_BREAKPOINT + struct perf_event *ptrace_bps[HBP_NUM]; + /* + * Helps identify source of single-step exception and subsequent + * hw-breakpoint enablement + */ + struct perf_event *last_hit_ubp; +#endif /* CONFIG_HAVE_HW_BREAKPOINT */ #endif unsigned long dabr; /* Data address breakpoint register */ #ifdef CONFIG_ALTIVEC diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 58d0572de6f..01006040f59 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -34,6 +34,7 @@ obj-y += vdso32/ obj-$(CONFIG_PPC64) += setup_64.o sys_ppc32.o \ signal_64.o ptrace32.o \ paca.o nvram_64.o firmware.o +obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_ppc970.o cpu_setup_pa6t.o obj64-$(CONFIG_RELOCATABLE) += reloc_64.o obj-$(CONFIG_PPC_BOOK3E_64) += exceptions-64e.o diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index 3e423fbad6b..f53029a0155 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -828,6 +828,7 @@ END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES) /* We have a data breakpoint exception - handle it */ handle_dabr_fault: + bl .save_nvgprs ld r4,_DAR(r1) ld r5,_DSISR(r1) addi r3,r1,STACK_FRAME_OVERHEAD diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c new file mode 100644 index 00000000000..7a2ad5e84c1 --- /dev/null +++ b/arch/powerpc/kernel/hw_breakpoint.c @@ -0,0 +1,325 @@ +/* + * HW_breakpoint: a unified kernel/user-space hardware breakpoint facility, + * using the CPU's debug registers. Derived from + * "arch/x86/kernel/hw_breakpoint.c" + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright 2010 IBM Corporation + * Author: K.Prasad + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +/* + * Stores the breakpoints currently in use on each breakpoint address + * register for every cpu + */ +static DEFINE_PER_CPU(struct perf_event *, bp_per_reg); + +/* + * Install a perf counter breakpoint. + * + * We seek a free debug address register and use it for this + * breakpoint. + * + * Atomic: we hold the counter->ctx->lock and we only handle variables + * and registers local to this cpu. + */ +int arch_install_hw_breakpoint(struct perf_event *bp) +{ + struct arch_hw_breakpoint *info = counter_arch_bp(bp); + struct perf_event **slot = &__get_cpu_var(bp_per_reg); + + *slot = bp; + + /* + * Do not install DABR values if the instruction must be single-stepped. + * If so, DABR will be populated in single_step_dabr_instruction(). + */ + if (current->thread.last_hit_ubp != bp) + set_dabr(info->address | info->type | DABR_TRANSLATION); + + return 0; +} + +/* + * Uninstall the breakpoint contained in the given counter. + * + * First we search the debug address register it uses and then we disable + * it. + * + * Atomic: we hold the counter->ctx->lock and we only handle variables + * and registers local to this cpu. + */ +void arch_uninstall_hw_breakpoint(struct perf_event *bp) +{ + struct perf_event **slot = &__get_cpu_var(bp_per_reg); + + if (*slot != bp) { + WARN_ONCE(1, "Can't find the breakpoint"); + return; + } + + *slot = NULL; + set_dabr(0); +} + +/* + * Perform cleanup of arch-specific counters during unregistration + * of the perf-event + */ +void arch_unregister_hw_breakpoint(struct perf_event *bp) +{ + /* + * If the breakpoint is unregistered between a hw_breakpoint_handler() + * and the single_step_dabr_instruction(), then cleanup the breakpoint + * restoration variables to prevent dangling pointers. + */ + if (bp->ctx->task) + bp->ctx->task->thread.last_hit_ubp = NULL; +} + +/* + * Check for virtual address in kernel space. + */ +int arch_check_bp_in_kernelspace(struct perf_event *bp) +{ + struct arch_hw_breakpoint *info = counter_arch_bp(bp); + + return is_kernel_addr(info->address); +} + +int arch_bp_generic_fields(int type, int *gen_bp_type) +{ + switch (type) { + case DABR_DATA_READ: + *gen_bp_type = HW_BREAKPOINT_R; + break; + case DABR_DATA_WRITE: + *gen_bp_type = HW_BREAKPOINT_W; + break; + case (DABR_DATA_WRITE | DABR_DATA_READ): + *gen_bp_type = (HW_BREAKPOINT_W | HW_BREAKPOINT_R); + break; + default: + return -EINVAL; + } + return 0; +} + +/* + * Validate the arch-specific HW Breakpoint register settings + */ +int arch_validate_hwbkpt_settings(struct perf_event *bp) +{ + int ret = -EINVAL; + struct arch_hw_breakpoint *info = counter_arch_bp(bp); + + if (!bp) + return ret; + + switch (bp->attr.bp_type) { + case HW_BREAKPOINT_R: + info->type = DABR_DATA_READ; + break; + case HW_BREAKPOINT_W: + info->type = DABR_DATA_WRITE; + break; + case HW_BREAKPOINT_R | HW_BREAKPOINT_W: + info->type = (DABR_DATA_READ | DABR_DATA_WRITE); + break; + default: + return ret; + } + + info->address = bp->attr.bp_addr; + info->len = bp->attr.bp_len; + + /* + * Since breakpoint length can be a maximum of HW_BREAKPOINT_LEN(8) + * and breakpoint addresses are aligned to nearest double-word + * HW_BREAKPOINT_ALIGN by rounding off to the lower address, the + * 'symbolsize' should satisfy the check below. + */ + if (info->len > + (HW_BREAKPOINT_LEN - (info->address & HW_BREAKPOINT_ALIGN))) + return -EINVAL; + return 0; +} + +/* + * Handle debug exception notifications. + */ +int __kprobes hw_breakpoint_handler(struct die_args *args) +{ + bool is_ptrace_bp = false; + int rc = NOTIFY_STOP; + struct perf_event *bp; + struct pt_regs *regs = args->regs; + int stepped = 1; + struct arch_hw_breakpoint *info; + unsigned int instr; + + /* Disable breakpoints during exception handling */ + set_dabr(0); + /* + * The counter may be concurrently released but that can only + * occur from a call_rcu() path. We can then safely fetch + * the breakpoint, use its callback, touch its counter + * while we are in an rcu_read_lock() path. + */ + rcu_read_lock(); + + bp = __get_cpu_var(bp_per_reg); + if (!bp) + goto out; + info = counter_arch_bp(bp); + is_ptrace_bp = (bp->overflow_handler == ptrace_triggered) ? + true : false; + + /* + * Return early after invoking user-callback function without restoring + * DABR if the breakpoint is from ptrace which always operates in + * one-shot mode. The ptrace-ed process will receive the SIGTRAP signal + * generated in do_dabr(). + */ + if (is_ptrace_bp) { + perf_bp_event(bp, regs); + rc = NOTIFY_DONE; + goto out; + } + + /* Do not emulate user-space instructions, instead single-step them */ + if (user_mode(regs)) { + bp->ctx->task->thread.last_hit_ubp = bp; + regs->msr |= MSR_SE; + goto out; + } + + stepped = 0; + instr = 0; + if (!__get_user_inatomic(instr, (unsigned int *) regs->nip)) + stepped = emulate_step(regs, instr); + + /* + * emulate_step() could not execute it. We've failed in reliably + * handling the hw-breakpoint. Unregister it and throw a warning + * message to let the user know about it. + */ + if (!stepped) { + WARN(1, "Unable to handle hardware breakpoint. Breakpoint at " + "0x%lx will be disabled.", info->address); + perf_event_disable(bp); + goto out; + } + /* + * As a policy, the callback is invoked in a 'trigger-after-execute' + * fashion + */ + perf_bp_event(bp, regs); + + set_dabr(info->address | info->type | DABR_TRANSLATION); +out: + rcu_read_unlock(); + return rc; +} + +/* + * Handle single-step exceptions following a DABR hit. + */ +int __kprobes single_step_dabr_instruction(struct die_args *args) +{ + struct pt_regs *regs = args->regs; + struct perf_event *bp = NULL; + struct arch_hw_breakpoint *bp_info; + + bp = current->thread.last_hit_ubp; + /* + * Check if we are single-stepping as a result of a + * previous HW Breakpoint exception + */ + if (!bp) + return NOTIFY_DONE; + + bp_info = counter_arch_bp(bp); + + /* + * We shall invoke the user-defined callback function in the single + * stepping handler to confirm to 'trigger-after-execute' semantics + */ + perf_bp_event(bp, regs); + + /* + * Do not disable MSR_SE if the process was already in + * single-stepping mode. + */ + if (!test_thread_flag(TIF_SINGLESTEP)) + regs->msr &= ~MSR_SE; + + set_dabr(bp_info->address | bp_info->type | DABR_TRANSLATION); + current->thread.last_hit_ubp = NULL; + return NOTIFY_STOP; +} + +/* + * Handle debug exception notifications. + */ +int __kprobes hw_breakpoint_exceptions_notify( + struct notifier_block *unused, unsigned long val, void *data) +{ + int ret = NOTIFY_DONE; + + switch (val) { + case DIE_DABR_MATCH: + ret = hw_breakpoint_handler(data); + break; + case DIE_SSTEP: + ret = single_step_dabr_instruction(data); + break; + } + + return ret; +} + +/* + * Release the user breakpoints used by ptrace + */ +void flush_ptrace_hw_breakpoint(struct task_struct *tsk) +{ + struct thread_struct *t = &tsk->thread; + + unregister_hw_breakpoint(t->ptrace_bps[0]); + t->ptrace_bps[0] = NULL; +} + +void hw_breakpoint_pmu_read(struct perf_event *bp) +{ + /* TODO */ +} diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c index 26f9900f773..6c7c546aa1b 100644 --- a/arch/powerpc/kernel/machine_kexec_64.c +++ b/arch/powerpc/kernel/machine_kexec_64.c @@ -25,6 +25,7 @@ #include /* _end */ #include #include +#include int default_machine_kexec_prepare(struct kimage *image) { @@ -165,6 +166,7 @@ static void kexec_smp_down(void *arg) while(kexec_all_irq_disabled == 0) cpu_relax(); mb(); /* make sure all irqs are disabled before this */ + hw_breakpoint_disable(); /* * Now every CPU has IRQs off, we can clear out any pending * IPIs and be sure that no more will come in after this. @@ -180,6 +182,7 @@ static void kexec_prepare_cpus_wait(int wait_state) { int my_cpu, i, notified=-1; + hw_breakpoint_disable(); my_cpu = get_cpu(); /* Make sure each CPU has atleast made it to the state we need */ for (i=0; i < NR_CPUS; i++) { diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 9d255b4f0a0..cbf3521d50b 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -37,6 +37,7 @@ #include #include #include +#include #include #include @@ -462,8 +463,14 @@ struct task_struct *__switch_to(struct task_struct *prev, #ifdef CONFIG_PPC_ADV_DEBUG_REGS switch_booke_debug_regs(&new->thread); #else +/* + * For PPC_BOOK3S_64, we use the hw-breakpoint interfaces that would + * schedule DABR + */ +#ifndef CONFIG_HAVE_HW_BREAKPOINT if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr)) set_dabr(new->thread.dabr); +#endif /* CONFIG_HAVE_HW_BREAKPOINT */ #endif @@ -642,7 +649,11 @@ void flush_thread(void) { discard_lazy_cpu_state(); +#ifdef CONFIG_HAVE_HW_BREAKPOINTS + flush_ptrace_hw_breakpoint(current); +#else /* CONFIG_HAVE_HW_BREAKPOINTS */ set_debug_reg_defaults(¤t->thread); +#endif /* CONFIG_HAVE_HW_BREAKPOINTS */ } void @@ -660,6 +671,9 @@ void prepare_to_copy(struct task_struct *tsk) flush_altivec_to_thread(current); flush_vsx_to_thread(current); flush_spe_to_thread(current); +#ifdef CONFIG_HAVE_HW_BREAKPOINT + flush_ptrace_hw_breakpoint(tsk); +#endif /* CONFIG_HAVE_HW_BREAKPOINT */ } /* diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 7a0c0199ea2..11f3cd9c832 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -32,6 +32,8 @@ #ifdef CONFIG_PPC32 #include #endif +#include +#include #include #include @@ -866,9 +868,34 @@ void user_disable_single_step(struct task_struct *task) clear_tsk_thread_flag(task, TIF_SINGLESTEP); } +#ifdef CONFIG_HAVE_HW_BREAKPOINT +void ptrace_triggered(struct perf_event *bp, int nmi, + struct perf_sample_data *data, struct pt_regs *regs) +{ + struct perf_event_attr attr; + + /* + * Disable the breakpoint request here since ptrace has defined a + * one-shot behaviour for breakpoint exceptions in PPC64. + * The SIGTRAP signal is generated automatically for us in do_dabr(). + * We don't have to do anything about that here + */ + attr = bp->attr; + attr.disabled = true; + modify_user_hw_breakpoint(bp, &attr); +} +#endif /* CONFIG_HAVE_HW_BREAKPOINT */ + int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, unsigned long data) { +#ifdef CONFIG_HAVE_HW_BREAKPOINT + int ret; + struct thread_struct *thread = &(task->thread); + struct perf_event *bp; + struct perf_event_attr attr; +#endif /* CONFIG_HAVE_HW_BREAKPOINT */ + /* For ppc64 we support one DABR and no IABR's at the moment (ppc64). * For embedded processors we support one DAC and no IAC's at the * moment. @@ -896,6 +923,43 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, /* Ensure breakpoint translation bit is set */ if (data && !(data & DABR_TRANSLATION)) return -EIO; +#ifdef CONFIG_HAVE_HW_BREAKPOINT + bp = thread->ptrace_bps[0]; + if ((!data) || !(data & (DABR_DATA_WRITE | DABR_DATA_READ))) { + if (bp) { + unregister_hw_breakpoint(bp); + thread->ptrace_bps[0] = NULL; + } + return 0; + } + if (bp) { + attr = bp->attr; + attr.bp_addr = data & ~HW_BREAKPOINT_ALIGN; + arch_bp_generic_fields(data & + (DABR_DATA_WRITE | DABR_DATA_READ), + &attr.bp_type); + ret = modify_user_hw_breakpoint(bp, &attr); + if (ret) + return ret; + thread->ptrace_bps[0] = bp; + thread->dabr = data; + return 0; + } + + /* Create a new breakpoint request if one doesn't exist already */ + hw_breakpoint_init(&attr); + attr.bp_addr = data & ~HW_BREAKPOINT_ALIGN; + arch_bp_generic_fields(data & (DABR_DATA_WRITE | DABR_DATA_READ), + &attr.bp_type); + + thread->ptrace_bps[0] = bp = register_user_hw_breakpoint(&attr, + ptrace_triggered, task); + if (IS_ERR(bp)) { + thread->ptrace_bps[0] = NULL; + return PTR_ERR(bp); + } + +#endif /* CONFIG_HAVE_HW_BREAKPOINT */ /* Move contents to the DABR register */ task->thread.dabr = data; diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index 7581dbffa18..a52ed2e47ac 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_PPC64) += copypage_64.o copyuser_64.o \ memcpy_64.o usercopy_64.o mem_64.o string.o obj-$(CONFIG_XMON) += sstep.o ldstfp.o obj-$(CONFIG_KPROBES) += sstep.o ldstfp.o +obj-$(CONFIG_HAVE_HW_BREAKPOINT) += sstep.o ldstfp.o ifeq ($(CONFIG_PPC64),y) obj-$(CONFIG_SMP) += locks.o -- cgit v1.2.3-18-g5258 From 2538c2d08f46141550a1e68819efa8fe31c6e3dc Mon Sep 17 00:00:00 2001 From: "K.Prasad" Date: Tue, 15 Jun 2010 11:35:31 +0530 Subject: powerpc, hw_breakpoint: Handle concurrent alignment interrupts If an alignment interrupt occurs on an instruction that is being single-stepped, the alignment interrupt handler currently handles the single-step condition by unconditionally sending a SIGTRAP to the process. Other synchronous interrupts that result in the instruction being emulated do likewise. With hw_breakpoint support, the hw_breakpoint code needs to be able to intercept these single-step events as well as those where the instruction executes normally and a trace interrupt happens. Fix this by making emulate_single_step() use the existing single_step_exception() function instead of calling _exception() directly. We then make single_step_exception() use the abstracted clear_single_step() rather than clearing bits in the MSR image directly so that emulate_single_step() will continue to work correctly on Book 3E processors. Signed-off-by: K.Prasad Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/traps.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 25fc33984c2..e5fe5a8522a 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -688,7 +688,7 @@ void RunModeException(struct pt_regs *regs) void __kprobes single_step_exception(struct pt_regs *regs) { - regs->msr &= ~(MSR_SE | MSR_BE); /* Turn off 'trace' bits */ + clear_single_step(regs); if (notify_die(DIE_SSTEP, "single_step", regs, 5, 5, SIGTRAP) == NOTIFY_STOP) @@ -707,10 +707,8 @@ void __kprobes single_step_exception(struct pt_regs *regs) */ static void emulate_single_step(struct pt_regs *regs) { - if (single_stepping(regs)) { - clear_single_step(regs); - _exception(SIGTRAP, regs, TRAP_TRACE, 0); - } + if (single_stepping(regs)) + single_step_exception(regs); } static inline int __parse_fpscr(unsigned long fpscr) -- cgit v1.2.3-18-g5258 From 06532a6743d83fac4b79389fc8c86c88cb4e3302 Mon Sep 17 00:00:00 2001 From: "K.Prasad" Date: Tue, 15 Jun 2010 11:35:41 +0530 Subject: powerpc, hw_breakpoint: Enable hw-breakpoints while handling intervening signals A signal delivered between a hw_breakpoint_handler() and the single_step_dabr_instruction() will not have the breakpoint active while the signal handler is running -- the signal delivery will set up a new MSR value which will not have MSR_SE set, so we won't get the signal step interrupt until and unless the signal handler returns (which it may never do). To fix this, we restore the breakpoint when delivering a signal -- we clear the MSR_SE bit and set the DABR again. If the signal handler returns, the DABR interrupt will occur again when the instruction that we were originally trying to single-step gets re-executed. [Paul Mackerras pointed out the need to do this.] Signed-off-by: K.Prasad Signed-off-by: Paul Mackerras --- arch/powerpc/include/asm/hw_breakpoint.h | 3 +++ arch/powerpc/kernel/hw_breakpoint.c | 18 ++++++++++++++++++ arch/powerpc/kernel/signal.c | 3 +++ 3 files changed, 24 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/include/asm/hw_breakpoint.h b/arch/powerpc/include/asm/hw_breakpoint.h index b111713b593..6576bad1069 100644 --- a/arch/powerpc/include/asm/hw_breakpoint.h +++ b/arch/powerpc/include/asm/hw_breakpoint.h @@ -65,9 +65,12 @@ static inline void hw_breakpoint_disable(void) { set_dabr(0); } +extern void thread_change_pc(struct task_struct *tsk, struct pt_regs *regs); #else /* CONFIG_HAVE_HW_BREAKPOINT */ static inline void hw_breakpoint_disable(void) { } +static inline void thread_change_pc(struct task_struct *tsk, + struct pt_regs *regs) { } #endif /* CONFIG_HAVE_HW_BREAKPOINT */ #endif /* __KERNEL__ */ #endif /* _PPC_BOOK3S_64_HW_BREAKPOINT_H */ diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c index 7a2ad5e84c1..7bd01a56d19 100644 --- a/arch/powerpc/kernel/hw_breakpoint.c +++ b/arch/powerpc/kernel/hw_breakpoint.c @@ -174,6 +174,24 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp) return 0; } +/* + * Restores the breakpoint on the debug registers. + * Invoke this function if it is known that the execution context is + * about to change to cause loss of MSR_SE settings. + */ +void thread_change_pc(struct task_struct *tsk, struct pt_regs *regs) +{ + struct arch_hw_breakpoint *info; + + if (likely(!tsk->thread.last_hit_ubp)) + return; + + info = counter_arch_bp(tsk->thread.last_hit_ubp); + regs->msr &= ~MSR_SE; + set_dabr(info->address | info->type | DABR_TRANSLATION); + tsk->thread.last_hit_ubp = NULL; +} + /* * Handle debug exception notifications. */ diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c index a0afb555a7c..7109f5b1baa 100644 --- a/arch/powerpc/kernel/signal.c +++ b/arch/powerpc/kernel/signal.c @@ -11,6 +11,7 @@ #include #include +#include #include #include @@ -149,6 +150,8 @@ static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs) if (current->thread.dabr) set_dabr(current->thread.dabr); #endif + /* Re-enable the breakpoints for the signal stack */ + thread_change_pc(current, regs); if (is32) { if (ka.sa.sa_flags & SA_SIGINFO) -- cgit v1.2.3-18-g5258 From e3e94084adb5610987283367574ebc771e8206e1 Mon Sep 17 00:00:00 2001 From: "K.Prasad" Date: Tue, 15 Jun 2010 11:36:12 +0530 Subject: powerpc, hw_breakpoint: Discard extraneous interrupt due to accesses outside symbol length Many a times, the requested breakpoint length can be less than the fixed breakpoint length i.e. 8 bytes supported by PowerPC 64-bit server (Book III S) processors. This could lead to extraneous interrupts resulting in false breakpoint notifications. This detects and discards such interrupts for non-ptrace requests. We don't change ptrace behaviour to avoid breaking compatability. [Suggestion from Paul Mackerras to add a new flag in 'struct arch_hw_breakpoint' to identify extraneous interrupts] Signed-off-by: K.Prasad Signed-off-by: Paul Mackerras --- arch/powerpc/include/asm/hw_breakpoint.h | 1 + arch/powerpc/kernel/hw_breakpoint.c | 23 +++++++++++++++++++++-- 2 files changed, 22 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/hw_breakpoint.h b/arch/powerpc/include/asm/hw_breakpoint.h index 6576bad1069..ea87f8ae7bd 100644 --- a/arch/powerpc/include/asm/hw_breakpoint.h +++ b/arch/powerpc/include/asm/hw_breakpoint.h @@ -27,6 +27,7 @@ #ifdef CONFIG_HAVE_HW_BREAKPOINT struct arch_hw_breakpoint { + bool extraneous_interrupt; u8 len; /* length of the target data symbol */ int type; unsigned long address; diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c index 7bd01a56d19..ed39805a3b8 100644 --- a/arch/powerpc/kernel/hw_breakpoint.c +++ b/arch/powerpc/kernel/hw_breakpoint.c @@ -204,6 +204,7 @@ int __kprobes hw_breakpoint_handler(struct die_args *args) int stepped = 1; struct arch_hw_breakpoint *info; unsigned int instr; + unsigned long dar = regs->dar; /* Disable breakpoints during exception handling */ set_dabr(0); @@ -234,6 +235,22 @@ int __kprobes hw_breakpoint_handler(struct die_args *args) goto out; } + /* + * Verify if dar lies within the address range occupied by the symbol + * being watched to filter extraneous exceptions. + */ + if (!((bp->attr.bp_addr <= dar) && + (dar <= (bp->attr.bp_addr + bp->attr.bp_len)))) { + /* + * This exception is triggered not because of a memory access + * on the monitored variable but in the double-word address + * range in which it is contained. We will consume this + * exception, considering it as 'noise'. + */ + info->extraneous_interrupt = true; + } else + info->extraneous_interrupt = false; + /* Do not emulate user-space instructions, instead single-step them */ if (user_mode(regs)) { bp->ctx->task->thread.last_hit_ubp = bp; @@ -261,7 +278,8 @@ int __kprobes hw_breakpoint_handler(struct die_args *args) * As a policy, the callback is invoked in a 'trigger-after-execute' * fashion */ - perf_bp_event(bp, regs); + if (!info->extraneous_interrupt) + perf_bp_event(bp, regs); set_dabr(info->address | info->type | DABR_TRANSLATION); out: @@ -292,7 +310,8 @@ int __kprobes single_step_dabr_instruction(struct die_args *args) * We shall invoke the user-defined callback function in the single * stepping handler to confirm to 'trigger-after-execute' semantics */ - perf_bp_event(bp, regs); + if (!bp_info->extraneous_interrupt) + perf_bp_event(bp, regs); /* * Do not disable MSR_SE if the process was already in -- cgit v1.2.3-18-g5258 From 574cb24899d35e71be1d8fb1add2c3306804e4bf Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 23 Jun 2010 15:42:43 +1000 Subject: powerpc, hw_breakpoint: Fix off-by-one in checking access address The code would accept an access to an address one byte past the end of the requested range as legitimate, due to having a "<=" rather than a "<". This fixes that and cleans up the code a bit. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/hw_breakpoint.c | 23 +++++++---------------- 1 file changed, 7 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c index ed39805a3b8..241e0971231 100644 --- a/arch/powerpc/kernel/hw_breakpoint.c +++ b/arch/powerpc/kernel/hw_breakpoint.c @@ -197,7 +197,6 @@ void thread_change_pc(struct task_struct *tsk, struct pt_regs *regs) */ int __kprobes hw_breakpoint_handler(struct die_args *args) { - bool is_ptrace_bp = false; int rc = NOTIFY_STOP; struct perf_event *bp; struct pt_regs *regs = args->regs; @@ -208,6 +207,7 @@ int __kprobes hw_breakpoint_handler(struct die_args *args) /* Disable breakpoints during exception handling */ set_dabr(0); + /* * The counter may be concurrently released but that can only * occur from a call_rcu() path. We can then safely fetch @@ -220,8 +220,6 @@ int __kprobes hw_breakpoint_handler(struct die_args *args) if (!bp) goto out; info = counter_arch_bp(bp); - is_ptrace_bp = (bp->overflow_handler == ptrace_triggered) ? - true : false; /* * Return early after invoking user-callback function without restoring @@ -229,7 +227,7 @@ int __kprobes hw_breakpoint_handler(struct die_args *args) * one-shot mode. The ptrace-ed process will receive the SIGTRAP signal * generated in do_dabr(). */ - if (is_ptrace_bp) { + if (bp->overflow_handler == ptrace_triggered) { perf_bp_event(bp, regs); rc = NOTIFY_DONE; goto out; @@ -237,19 +235,12 @@ int __kprobes hw_breakpoint_handler(struct die_args *args) /* * Verify if dar lies within the address range occupied by the symbol - * being watched to filter extraneous exceptions. + * being watched to filter extraneous exceptions. If it doesn't, + * we still need to single-step the instruction, but we don't + * generate an event. */ - if (!((bp->attr.bp_addr <= dar) && - (dar <= (bp->attr.bp_addr + bp->attr.bp_len)))) { - /* - * This exception is triggered not because of a memory access - * on the monitored variable but in the double-word address - * range in which it is contained. We will consume this - * exception, considering it as 'noise'. - */ - info->extraneous_interrupt = true; - } else - info->extraneous_interrupt = false; + info->extraneous_interrupt = !((bp->attr.bp_addr <= dar) && + (dar - bp->attr.bp_addr < bp->attr.bp_len)); /* Do not emulate user-space instructions, instead single-step them */ if (user_mode(regs)) { -- cgit v1.2.3-18-g5258 From 76b0f1337690d223811c852ad3a5078eb89276c5 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 23 Jun 2010 15:46:55 +1000 Subject: powerpc, hw_breakpoint: Cooperate better with other single-steppers The code we had to clear the MSR_SE bit was not doing anything because the caller (ultimately single_step_exception() in traps.c) had already cleared. Instead of trying to leave MSR_SE set if the TIF_SINGLESTEP flag is set (which indicates that the process is being single-stepped by ptrace), we instead return NOTIFY_DONE in that case, which means the caller will generate a SIGTRAP for the process. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/hw_breakpoint.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c index 241e0971231..5a1d55d06a0 100644 --- a/arch/powerpc/kernel/hw_breakpoint.c +++ b/arch/powerpc/kernel/hw_breakpoint.c @@ -304,15 +304,16 @@ int __kprobes single_step_dabr_instruction(struct die_args *args) if (!bp_info->extraneous_interrupt) perf_bp_event(bp, regs); + set_dabr(bp_info->address | bp_info->type | DABR_TRANSLATION); + current->thread.last_hit_ubp = NULL; + /* - * Do not disable MSR_SE if the process was already in - * single-stepping mode. + * If the process was being single-stepped by ptrace, let the + * other single-step actions occur (e.g. generate SIGTRAP). */ - if (!test_thread_flag(TIF_SINGLESTEP)) - regs->msr &= ~MSR_SE; + if (test_thread_flag(TIF_SINGLESTEP)) + return NOTIFY_DONE; - set_dabr(bp_info->address | bp_info->type | DABR_TRANSLATION); - current->thread.last_hit_ubp = NULL; return NOTIFY_STOP; } -- cgit v1.2.3-18-g5258 From d09ec7387184eba9e3030496f0451204090ff610 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Tue, 29 Jun 2010 12:50:32 +1000 Subject: powerpc, hw_breakpoint: Tell generic code we have no instruction breakpoints At present, hw_breakpoint_slots() returns 1 regardless of what type of breakpoint is specified in the type argument. Since we don't define CONFIG_HAVE_MIXED_BREAKPOINTS_REGS, there are separate values for TYPE_INST and TYPE_DATA, and hw_breakpoint_slots() returns 1 for both, effectively advertising instruction breakpoint support which doesn't exist. This fixes it by making hw_breakpoint_slots return 1 for TYPE_DATA and 0 for TYPE_INST. This moves hw_breakpoint_slots() from the powerpc hw_breakpoint.h to hw_breakpoint.c because the definitions of TYPE_INST and TYPE_DATA aren't available in . They are defined in but we can't include that header in , and nor can we rely on being included before . Since hw_breakpoint_slots() is only called at boot time, there is no performance impact from making it a real function rather than a static inline. Signed-off-by: Paul Mackerras --- arch/powerpc/include/asm/hw_breakpoint.h | 5 +---- arch/powerpc/kernel/hw_breakpoint.c | 10 ++++++++++ 2 files changed, 11 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/hw_breakpoint.h b/arch/powerpc/include/asm/hw_breakpoint.h index ea87f8ae7bd..1c33ec17ca3 100644 --- a/arch/powerpc/include/asm/hw_breakpoint.h +++ b/arch/powerpc/include/asm/hw_breakpoint.h @@ -37,10 +37,6 @@ struct arch_hw_breakpoint { #include #include -static inline int hw_breakpoint_slots(int type) -{ - return HBP_NUM; -} struct perf_event; struct pmu; struct perf_sample_data; @@ -49,6 +45,7 @@ struct perf_sample_data; /* Maximum permissible length of any HW Breakpoint */ #define HW_BREAKPOINT_LEN 0x8 +extern int hw_breakpoint_slots(int type); extern int arch_bp_generic_fields(int type, int *gen_bp_type); extern int arch_check_bp_in_kernelspace(struct perf_event *bp); extern int arch_validate_hwbkpt_settings(struct perf_event *bp); diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c index 5a1d55d06a0..5ecd0401cdb 100644 --- a/arch/powerpc/kernel/hw_breakpoint.c +++ b/arch/powerpc/kernel/hw_breakpoint.c @@ -43,6 +43,16 @@ */ static DEFINE_PER_CPU(struct perf_event *, bp_per_reg); +/* + * Returns total number of data or instruction breakpoints available. + */ +int hw_breakpoint_slots(int type) +{ + if (type == TYPE_DATA) + return HBP_NUM; + return 0; /* no instruction breakpoints available */ +} + /* * Install a perf counter breakpoint. * -- cgit v1.2.3-18-g5258 From 8fd63a9ea7528463211a6c88d500c51851d960c8 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Sun, 20 Jun 2010 19:03:08 +0000 Subject: powerpc: Rework VDSO gettimeofday to prevent time going backwards Currently it is possible for userspace to see the result of gettimeofday() going backwards by 1 microsecond, assuming that userspace is using the gettimeofday() in the VDSO. The VDSO gettimeofday() algorithm computes the time in "xsecs", which are units of 2^-20 seconds, or approximately 0.954 microseconds, using the algorithm now = (timebase - tb_orig_stamp) * tb_to_xs + stamp_xsec and then converts the time in xsecs to seconds and microseconds. The kernel updates the tb_orig_stamp and stamp_xsec values every tick in update_vsyscall(). If the length of the tick is not an integer number of xsecs, then some precision is lost in converting the current time to xsecs. For example, with CONFIG_HZ=1000, the tick is 1ms long, which is 1048.576 xsecs. That means that stamp_xsec will advance by either 1048 or 1049 on each tick. With the right conditions, it is possible for userspace to get (timebase - tb_orig_stamp) * tb_to_xs being 1049 if the kernel is slightly late in updating the vdso_datapage, and then for stamp_xsec to advance by 1048 when the kernel does update it, and for userspace to then see (timebase - tb_orig_stamp) * tb_to_xs being zero due to integer truncation. The result is that time appears to go backwards by 1 microsecond. To fix this we change the VDSO gettimeofday to use a new field in the VDSO datapage which stores the nanoseconds part of the time as a fractional number of seconds in a 0.32 binary fraction format. (Or put another way, as a 32-bit number in units of 0.23283 ns.) This is convenient because we can use the mulhwu instruction to convert it to either microseconds or nanoseconds. Since it turns out that computing the time of day using this new field is simpler than either using stamp_xsec (as gettimeofday does) or stamp_xtime.tv_nsec (as clock_gettime does), this converts both gettimeofday and clock_gettime to use the new field. The existing __do_get_tspec function is converted to use the new field and take a parameter in r7 that indicates the desired resolution, 1,000,000 for microseconds or 1,000,000,000 for nanoseconds. The __do_get_xsec function is then unused and is deleted. The new algorithm is now = ((timebase - tb_orig_stamp) << 12) * tb_to_xs + (stamp_xtime_seconds << 32) + stamp_sec_fraction with 'now' in units of 2^-32 seconds. That is then converted to seconds and either microseconds or nanoseconds with seconds = now >> 32 partseconds = ((now & 0xffffffff) * resolution) >> 32 The 32-bit VDSO code also makes a further simplification: it ignores the bottom 32 bits of the tb_to_xs value, which is a 0.64 format binary fraction. Doing so gets rid of 4 multiply instructions. Assuming a timebase frequency of 1GHz or less and an update interval of no more than 10ms, the upper 32 bits of tb_to_xs will be at least 4503599, so the error from ignoring the low 32 bits will be at most 2.2ns, which is more than an order of magnitude less than the time taken to do gettimeofday or clock_gettime on our fastest processors, so there is no possibility of seeing inconsistent values due to this. This also moves update_gtod() down next to its only caller, and makes update_vsyscall use the time passed in via the wall_time argument rather than accessing xtime directly. At present, wall_time always points to xtime, but that could change in future. Signed-off-by: Paul Mackerras Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/vdso_datapage.h | 2 + arch/powerpc/kernel/asm-offsets.c | 1 + arch/powerpc/kernel/time.c | 61 +++++----- arch/powerpc/kernel/vdso32/gettimeofday.S | 184 +++++++----------------------- arch/powerpc/kernel/vdso64/gettimeofday.S | 88 ++++---------- 5 files changed, 99 insertions(+), 237 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/vdso_datapage.h b/arch/powerpc/include/asm/vdso_datapage.h index 13c2c283e17..08679c5319b 100644 --- a/arch/powerpc/include/asm/vdso_datapage.h +++ b/arch/powerpc/include/asm/vdso_datapage.h @@ -85,6 +85,7 @@ struct vdso_data { __s32 wtom_clock_sec; /* Wall to monotonic clock */ __s32 wtom_clock_nsec; struct timespec stamp_xtime; /* xtime as at tb_orig_stamp */ + __u32 stamp_sec_fraction; /* fractional seconds of stamp_xtime */ __u32 syscall_map_64[SYSCALL_MAP_SIZE]; /* map of syscalls */ __u32 syscall_map_32[SYSCALL_MAP_SIZE]; /* map of syscalls */ }; @@ -105,6 +106,7 @@ struct vdso_data { __s32 wtom_clock_sec; /* Wall to monotonic clock */ __s32 wtom_clock_nsec; struct timespec stamp_xtime; /* xtime as at tb_orig_stamp */ + __u32 stamp_sec_fraction; /* fractional seconds of stamp_xtime */ __u32 syscall_map_32[SYSCALL_MAP_SIZE]; /* map of syscalls */ __u32 dcache_block_size; /* L1 d-cache block size */ __u32 icache_block_size; /* L1 i-cache block size */ diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 496cc5b3984..acbbac6aaa2 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -342,6 +342,7 @@ int main(void) DEFINE(WTOM_CLOCK_SEC, offsetof(struct vdso_data, wtom_clock_sec)); DEFINE(WTOM_CLOCK_NSEC, offsetof(struct vdso_data, wtom_clock_nsec)); DEFINE(STAMP_XTIME, offsetof(struct vdso_data, stamp_xtime)); + DEFINE(STAMP_SEC_FRAC, offsetof(struct vdso_data, stamp_sec_fraction)); DEFINE(CFG_ICACHE_BLOCKSZ, offsetof(struct vdso_data, icache_block_size)); DEFINE(CFG_DCACHE_BLOCKSZ, offsetof(struct vdso_data, dcache_block_size)); DEFINE(CFG_ICACHE_LOGBLOCKSZ, offsetof(struct vdso_data, icache_log_block_size)); diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 0441bbdadbd..5adebaf47f1 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -423,30 +423,6 @@ void udelay(unsigned long usecs) } EXPORT_SYMBOL(udelay); -static inline void update_gtod(u64 new_tb_stamp, u64 new_stamp_xsec, - u64 new_tb_to_xs) -{ - /* - * tb_update_count is used to allow the userspace gettimeofday code - * to assure itself that it sees a consistent view of the tb_to_xs and - * stamp_xsec variables. It reads the tb_update_count, then reads - * tb_to_xs and stamp_xsec and then reads tb_update_count again. If - * the two values of tb_update_count match and are even then the - * tb_to_xs and stamp_xsec values are consistent. If not, then it - * loops back and reads them again until this criteria is met. - * We expect the caller to have done the first increment of - * vdso_data->tb_update_count already. - */ - vdso_data->tb_orig_stamp = new_tb_stamp; - vdso_data->stamp_xsec = new_stamp_xsec; - vdso_data->tb_to_xs = new_tb_to_xs; - vdso_data->wtom_clock_sec = wall_to_monotonic.tv_sec; - vdso_data->wtom_clock_nsec = wall_to_monotonic.tv_nsec; - vdso_data->stamp_xtime = xtime; - smp_wmb(); - ++(vdso_data->tb_update_count); -} - #ifdef CONFIG_SMP unsigned long profile_pc(struct pt_regs *regs) { @@ -873,10 +849,37 @@ static cycle_t timebase_read(struct clocksource *cs) return (cycle_t)get_tb(); } +static inline void update_gtod(u64 new_tb_stamp, u64 new_stamp_xsec, + u64 new_tb_to_xs, struct timespec *now, + u32 frac_sec) +{ + /* + * tb_update_count is used to allow the userspace gettimeofday code + * to assure itself that it sees a consistent view of the tb_to_xs and + * stamp_xsec variables. It reads the tb_update_count, then reads + * tb_to_xs and stamp_xsec and then reads tb_update_count again. If + * the two values of tb_update_count match and are even then the + * tb_to_xs and stamp_xsec values are consistent. If not, then it + * loops back and reads them again until this criteria is met. + * We expect the caller to have done the first increment of + * vdso_data->tb_update_count already. + */ + vdso_data->tb_orig_stamp = new_tb_stamp; + vdso_data->stamp_xsec = new_stamp_xsec; + vdso_data->tb_to_xs = new_tb_to_xs; + vdso_data->wtom_clock_sec = wall_to_monotonic.tv_sec; + vdso_data->wtom_clock_nsec = wall_to_monotonic.tv_nsec; + vdso_data->stamp_xtime = *now; + vdso_data->stamp_sec_fraction = frac_sec; + smp_wmb(); + ++(vdso_data->tb_update_count); +} + void update_vsyscall(struct timespec *wall_time, struct clocksource *clock, u32 mult) { u64 t2x, stamp_xsec; + u32 frac_sec; if (clock != &clocksource_timebase) return; @@ -888,10 +891,14 @@ void update_vsyscall(struct timespec *wall_time, struct clocksource *clock, /* XXX this assumes clock->shift == 22 */ /* 4611686018 ~= 2^(20+64-22) / 1e9 */ t2x = (u64) mult * 4611686018ULL; - stamp_xsec = (u64) xtime.tv_nsec * XSEC_PER_SEC; + stamp_xsec = (u64) wall_time->tv_nsec * XSEC_PER_SEC; do_div(stamp_xsec, 1000000000); - stamp_xsec += (u64) xtime.tv_sec * XSEC_PER_SEC; - update_gtod(clock->cycle_last, stamp_xsec, t2x); + stamp_xsec += (u64) wall_time->tv_sec * XSEC_PER_SEC; + + BUG_ON(wall_time->tv_nsec >= NSEC_PER_SEC); + /* this is tv_nsec / 1e9 as a 0.32 fraction */ + frac_sec = ((u64) wall_time->tv_nsec * 18446744073ULL) >> 32; + update_gtod(clock->cycle_last, stamp_xsec, t2x, wall_time, frac_sec); } void update_vsyscall_tz(void) diff --git a/arch/powerpc/kernel/vdso32/gettimeofday.S b/arch/powerpc/kernel/vdso32/gettimeofday.S index ee038d4bf25..4ee09ee2e83 100644 --- a/arch/powerpc/kernel/vdso32/gettimeofday.S +++ b/arch/powerpc/kernel/vdso32/gettimeofday.S @@ -19,8 +19,10 @@ /* Offset for the low 32-bit part of a field of long type */ #ifdef CONFIG_PPC64 #define LOPART 4 +#define TSPEC_TV_SEC TSPC64_TV_SEC+LOPART #else #define LOPART 0 +#define TSPEC_TV_SEC TSPC32_TV_SEC #endif .text @@ -41,23 +43,11 @@ V_FUNCTION_BEGIN(__kernel_gettimeofday) mr r9, r3 /* datapage ptr in r9 */ cmplwi r10,0 /* check if tv is NULL */ beq 3f - bl __do_get_xsec@local /* get xsec from tb & kernel */ - bne- 2f /* out of line -> do syscall */ - - /* seconds are xsec >> 20 */ - rlwinm r5,r4,12,20,31 - rlwimi r5,r3,12,0,19 - stw r5,TVAL32_TV_SEC(r10) - - /* get remaining xsec and convert to usec. we scale - * up remaining xsec by 12 bits and get the top 32 bits - * of the multiplication - */ - rlwinm r5,r4,12,0,19 - lis r6,1000000@h - ori r6,r6,1000000@l - mulhwu r5,r5,r6 - stw r5,TVAL32_TV_USEC(r10) + lis r7,1000000@ha /* load up USEC_PER_SEC */ + addi r7,r7,1000000@l /* so we get microseconds in r4 */ + bl __do_get_tspec@local /* get sec/usec from tb & kernel */ + stw r3,TVAL32_TV_SEC(r10) + stw r4,TVAL32_TV_USEC(r10) 3: cmplwi r11,0 /* check if tz is NULL */ beq 1f @@ -70,14 +60,6 @@ V_FUNCTION_BEGIN(__kernel_gettimeofday) crclr cr0*4+so li r3,0 blr - -2: - mtlr r12 - mr r3,r10 - mr r4,r11 - li r0,__NR_gettimeofday - sc - blr .cfi_endproc V_FUNCTION_END(__kernel_gettimeofday) @@ -100,7 +82,8 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) mr r11,r4 /* r11 saves tp */ bl __get_datapage@local /* get data page */ mr r9,r3 /* datapage ptr in r9 */ - + lis r7,NSEC_PER_SEC@h /* want nanoseconds */ + ori r7,r7,NSEC_PER_SEC@l 50: bl __do_get_tspec@local /* get sec/nsec from tb & kernel */ bne cr1,80f /* not monotonic -> all done */ @@ -198,83 +181,12 @@ V_FUNCTION_END(__kernel_clock_getres) /* - * This is the core of gettimeofday() & friends, it returns the xsec - * value in r3 & r4 and expects the datapage ptr (non clobbered) - * in r9. clobbers r0,r4,r5,r6,r7,r8. - * When returning, r8 contains the counter value that can be reused - * by the monotonic clock implementation - */ -__do_get_xsec: - .cfi_startproc - /* Check for update count & load values. We use the low - * order 32 bits of the update count - */ -1: lwz r8,(CFG_TB_UPDATE_COUNT+LOPART)(r9) - andi. r0,r8,1 /* pending update ? loop */ - bne- 1b - xor r0,r8,r8 /* create dependency */ - add r9,r9,r0 - - /* Load orig stamp (offset to TB) */ - lwz r5,CFG_TB_ORIG_STAMP(r9) - lwz r6,(CFG_TB_ORIG_STAMP+4)(r9) - - /* Get a stable TB value */ -2: mftbu r3 - mftbl r4 - mftbu r0 - cmpl cr0,r3,r0 - bne- 2b - - /* Substract tb orig stamp. If the high part is non-zero, we jump to - * the slow path which call the syscall. - * If it's ok, then we have our 32 bits tb_ticks value in r7 - */ - subfc r7,r6,r4 - subfe. r0,r5,r3 - bne- 3f - - /* Load scale factor & do multiplication */ - lwz r5,CFG_TB_TO_XS(r9) /* load values */ - lwz r6,(CFG_TB_TO_XS+4)(r9) - mulhwu r4,r7,r5 - mulhwu r6,r7,r6 - mullw r0,r7,r5 - addc r6,r6,r0 - - /* At this point, we have the scaled xsec value in r4 + XER:CA - * we load & add the stamp since epoch - */ - lwz r5,CFG_STAMP_XSEC(r9) - lwz r6,(CFG_STAMP_XSEC+4)(r9) - adde r4,r4,r6 - addze r3,r5 - - /* We now have our result in r3,r4. We create a fake dependency - * on that result and re-check the counter - */ - or r6,r4,r3 - xor r0,r6,r6 - add r9,r9,r0 - lwz r0,(CFG_TB_UPDATE_COUNT+LOPART)(r9) - cmpl cr0,r8,r0 /* check if updated */ - bne- 1b - - /* Warning ! The caller expects CR:EQ to be set to indicate a - * successful calculation (so it won't fallback to the syscall - * method). We have overriden that CR bit in the counter check, - * but fortunately, the loop exit condition _is_ CR:EQ set, so - * we can exit safely here. If you change this code, be careful - * of that side effect. - */ -3: blr - .cfi_endproc - -/* - * This is the core of clock_gettime(), it returns the current - * time in seconds and nanoseconds in r3 and r4. + * This is the core of clock_gettime() and gettimeofday(), + * it returns the current time in r3 (seconds) and r4. + * On entry, r7 gives the resolution of r4, either USEC_PER_SEC + * or NSEC_PER_SEC, giving r4 in microseconds or nanoseconds. * It expects the datapage ptr in r9 and doesn't clobber it. - * It clobbers r0, r5, r6, r10 and returns NSEC_PER_SEC in r7. + * It clobbers r0, r5 and r6. * On return, r8 contains the counter value that can be reused. * This clobbers cr0 but not any other cr field. */ @@ -297,70 +209,58 @@ __do_get_tspec: 2: mftbu r3 mftbl r4 mftbu r0 - cmpl cr0,r3,r0 + cmplw cr0,r3,r0 bne- 2b /* Subtract tb orig stamp and shift left 12 bits. */ - subfc r7,r6,r4 + subfc r4,r6,r4 subfe r0,r5,r3 slwi r0,r0,12 - rlwimi. r0,r7,12,20,31 - slwi r7,r7,12 + rlwimi. r0,r4,12,20,31 + slwi r4,r4,12 - /* Load scale factor & do multiplication */ + /* + * Load scale factor & do multiplication. + * We only use the high 32 bits of the tb_to_xs value. + * Even with a 1GHz timebase clock, the high 32 bits of + * tb_to_xs will be at least 4 million, so the error from + * ignoring the low 32 bits will be no more than 0.25ppm. + * The error will just make the clock run very very slightly + * slow until the next time the kernel updates the VDSO data, + * at which point the clock will catch up to the kernel's value, + * so there is no long-term error accumulation. + */ lwz r5,CFG_TB_TO_XS(r9) /* load values */ - lwz r6,(CFG_TB_TO_XS+4)(r9) - mulhwu r3,r7,r6 - mullw r10,r7,r5 - mulhwu r4,r7,r5 - addc r10,r3,r10 + mulhwu r4,r4,r5 li r3,0 beq+ 4f /* skip high part computation if 0 */ mulhwu r3,r0,r5 - mullw r7,r0,r5 - mulhwu r5,r0,r6 - mullw r6,r0,r6 - adde r4,r4,r7 - addze r3,r3 + mullw r5,r0,r5 addc r4,r4,r5 addze r3,r3 - addc r10,r10,r6 - -4: addze r4,r4 /* add in carry */ - lis r7,NSEC_PER_SEC@h - ori r7,r7,NSEC_PER_SEC@l - mulhwu r4,r4,r7 /* convert to nanoseconds */ - - /* At this point, we have seconds & nanoseconds since the xtime - * stamp in r3+CA and r4. Load & add the xtime stamp. +4: + /* At this point, we have seconds since the xtime stamp + * as a 32.32 fixed-point number in r3 and r4. + * Load & add the xtime stamp. */ -#ifdef CONFIG_PPC64 - lwz r5,STAMP_XTIME+TSPC64_TV_SEC+LOPART(r9) - lwz r6,STAMP_XTIME+TSPC64_TV_NSEC+LOPART(r9) -#else - lwz r5,STAMP_XTIME+TSPC32_TV_SEC(r9) - lwz r6,STAMP_XTIME+TSPC32_TV_NSEC(r9) -#endif - add r4,r4,r6 + lwz r5,STAMP_XTIME+TSPEC_TV_SEC(r9) + lwz r6,STAMP_SEC_FRAC(r9) + addc r4,r4,r6 adde r3,r3,r5 - /* We now have our result in r3,r4. We create a fake dependency - * on that result and re-check the counter + /* We create a fake dependency on the result in r3/r4 + * and re-check the counter */ or r6,r4,r3 xor r0,r6,r6 add r9,r9,r0 lwz r0,(CFG_TB_UPDATE_COUNT+LOPART)(r9) - cmpl cr0,r8,r0 /* check if updated */ + cmplw cr0,r8,r0 /* check if updated */ bne- 1b - /* check for nanosecond overflow and adjust if necessary */ - cmpw r4,r7 - bltlr /* all done if no overflow */ - subf r4,r7,r4 /* adjust if overflow */ - addi r3,r3,1 + mulhwu r4,r4,r7 /* convert to micro or nanoseconds */ blr .cfi_endproc diff --git a/arch/powerpc/kernel/vdso64/gettimeofday.S b/arch/powerpc/kernel/vdso64/gettimeofday.S index 262cd5857a5..e97a9a0dc4a 100644 --- a/arch/powerpc/kernel/vdso64/gettimeofday.S +++ b/arch/powerpc/kernel/vdso64/gettimeofday.S @@ -33,18 +33,11 @@ V_FUNCTION_BEGIN(__kernel_gettimeofday) bl V_LOCAL_FUNC(__get_datapage) /* get data page */ cmpldi r11,0 /* check if tv is NULL */ beq 2f - bl V_LOCAL_FUNC(__do_get_xsec) /* get xsec from tb & kernel */ - lis r7,15 /* r7 = 1000000 = USEC_PER_SEC */ - ori r7,r7,16960 - rldicl r5,r4,44,20 /* r5 = sec = xsec / XSEC_PER_SEC */ - rldicr r6,r5,20,43 /* r6 = sec * XSEC_PER_SEC */ - std r5,TVAL64_TV_SEC(r11) /* store sec in tv */ - subf r0,r6,r4 /* r0 = xsec = (xsec - r6) */ - mulld r0,r0,r7 /* usec = (xsec * USEC_PER_SEC) / - * XSEC_PER_SEC - */ - rldicl r0,r0,44,20 - std r0,TVAL64_TV_USEC(r11) /* store usec in tv */ + lis r7,1000000@ha /* load up USEC_PER_SEC */ + addi r7,r7,1000000@l + bl V_LOCAL_FUNC(__do_get_tspec) /* get sec/us from tb & kernel */ + std r4,TVAL64_TV_SEC(r11) /* store sec in tv */ + std r5,TVAL64_TV_USEC(r11) /* store usec in tv */ 2: cmpldi r10,0 /* check if tz is NULL */ beq 1f lwz r4,CFG_TZ_MINUTEWEST(r3)/* fill tz */ @@ -77,6 +70,8 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) .cfi_register lr,r12 mr r11,r4 /* r11 saves tp */ bl V_LOCAL_FUNC(__get_datapage) /* get data page */ + lis r7,NSEC_PER_SEC@h /* want nanoseconds */ + ori r7,r7,NSEC_PER_SEC@l 50: bl V_LOCAL_FUNC(__do_get_tspec) /* get time from tb & kernel */ bne cr1,80f /* if not monotonic, all done */ @@ -171,49 +166,12 @@ V_FUNCTION_END(__kernel_clock_getres) /* - * This is the core of gettimeofday(), it returns the xsec - * value in r4 and expects the datapage ptr (non clobbered) - * in r3. clobbers r0,r4,r5,r6,r7,r8 - * When returning, r8 contains the counter value that can be reused - */ -V_FUNCTION_BEGIN(__do_get_xsec) - .cfi_startproc - /* check for update count & load values */ -1: ld r8,CFG_TB_UPDATE_COUNT(r3) - andi. r0,r8,1 /* pending update ? loop */ - bne- 1b - xor r0,r8,r8 /* create dependency */ - add r3,r3,r0 - - /* Get TB & offset it. We use the MFTB macro which will generate - * workaround code for Cell. - */ - MFTB(r7) - ld r9,CFG_TB_ORIG_STAMP(r3) - subf r7,r9,r7 - - /* Scale result */ - ld r5,CFG_TB_TO_XS(r3) - mulhdu r7,r7,r5 - - /* Add stamp since epoch */ - ld r6,CFG_STAMP_XSEC(r3) - add r4,r6,r7 - - xor r0,r4,r4 - add r3,r3,r0 - ld r0,CFG_TB_UPDATE_COUNT(r3) - cmpld cr0,r0,r8 /* check if updated */ - bne- 1b - blr - .cfi_endproc -V_FUNCTION_END(__do_get_xsec) - -/* - * This is the core of clock_gettime(), it returns the current - * time in seconds and nanoseconds in r4 and r5. + * This is the core of clock_gettime() and gettimeofday(), + * it returns the current time in r4 (seconds) and r5. + * On entry, r7 gives the resolution of r5, either USEC_PER_SEC + * or NSEC_PER_SEC, giving r5 in microseconds or nanoseconds. * It expects the datapage ptr in r3 and doesn't clobber it. - * It clobbers r0 and r6 and returns NSEC_PER_SEC in r7. + * It clobbers r0, r6 and r9. * On return, r8 contains the counter value that can be reused. * This clobbers cr0 but not any other cr field. */ @@ -229,18 +187,18 @@ V_FUNCTION_BEGIN(__do_get_tspec) /* Get TB & offset it. We use the MFTB macro which will generate * workaround code for Cell. */ - MFTB(r7) + MFTB(r6) ld r9,CFG_TB_ORIG_STAMP(r3) - subf r7,r9,r7 + subf r6,r9,r6 /* Scale result */ ld r5,CFG_TB_TO_XS(r3) - sldi r7,r7,12 /* compute time since stamp_xtime */ - mulhdu r6,r7,r5 /* in units of 2^-32 seconds */ + sldi r6,r6,12 /* compute time since stamp_xtime */ + mulhdu r6,r6,r5 /* in units of 2^-32 seconds */ /* Add stamp since epoch */ ld r4,STAMP_XTIME+TSPC64_TV_SEC(r3) - ld r5,STAMP_XTIME+TSPC64_TV_NSEC(r3) + lwz r5,STAMP_SEC_FRAC(r3) or r0,r4,r5 or r0,r0,r6 xor r0,r0,r0 @@ -250,17 +208,11 @@ V_FUNCTION_BEGIN(__do_get_tspec) bne- 1b /* reload if so */ /* convert to seconds & nanoseconds and add to stamp */ - lis r7,NSEC_PER_SEC@h - ori r7,r7,NSEC_PER_SEC@l - mulhwu r0,r6,r7 /* compute nanoseconds and */ + add r6,r6,r5 /* add on fractional seconds of xtime */ + mulhwu r5,r6,r7 /* compute micro or nanoseconds and */ srdi r6,r6,32 /* seconds since stamp_xtime */ - clrldi r0,r0,32 - add r5,r5,r0 /* add nanoseconds together */ - cmpd r5,r7 /* overflow? */ + clrldi r5,r5,32 add r4,r4,r6 - bltlr /* all done if no overflow */ - subf r5,r7,r5 /* if overflow, adjust */ - addi r4,r4,1 blr .cfi_endproc V_FUNCTION_END(__do_get_tspec) -- cgit v1.2.3-18-g5258 From c1aa687d499a8bce55cb8cf962f0b72c0f933f14 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Sun, 20 Jun 2010 19:04:14 +0000 Subject: powerpc: Clean up obsolete code relating to decrementer and timebase Since the decrementer and timekeeping code was moved over to using the generic clockevents and timekeeping infrastructure, several variables and functions have been obsolete and effectively unused. This deletes them. In particular, wakeup_decrementer() is no longer needed since the generic code reprograms the decrementer as part of the process of resuming the timekeeping code, which happens during sysdev resume. Thus the wakeup_decrementer calls in the suspend_enter methods for 52xx platforms have been removed. The call in the powermac cpu frequency change code has been replaced by set_dec(1), which will cause a timer interrupt as soon as interrupts are enabled, and the generic code will then reprogram the decrementer with the correct value. This also simplifies the generic_suspend_en/disable_irqs functions and makes them static since they are not referenced outside time.c. The preempt_enable/disable calls are removed because the generic code has disabled all but the boot cpu at the point where these functions are called, so we can't be moved to another cpu. Signed-off-by: Paul Mackerras Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/machdep.h | 3 - arch/powerpc/include/asm/time.h | 7 -- arch/powerpc/kernel/smp.c | 2 - arch/powerpc/kernel/time.c | 136 +-------------------------- arch/powerpc/platforms/52xx/lite5200_pm.c | 3 - arch/powerpc/platforms/52xx/mpc52xx_pm.c | 3 - arch/powerpc/platforms/powermac/cpufreq_32.c | 8 +- 7 files changed, 9 insertions(+), 153 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h index 9f0fc9e6ce0..7716e68f7b1 100644 --- a/arch/powerpc/include/asm/machdep.h +++ b/arch/powerpc/include/asm/machdep.h @@ -366,8 +366,5 @@ static inline void log_error(char *buf, unsigned int err_type, int fatal) #define machine_late_initcall(mach,fn) __define_machine_initcall(mach,"7",fn,7) #define machine_late_initcall_sync(mach,fn) __define_machine_initcall(mach,"7s",fn,7s) -void generic_suspend_disable_irqs(void); -void generic_suspend_enable_irqs(void); - #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_MACHDEP_H */ diff --git a/arch/powerpc/include/asm/time.h b/arch/powerpc/include/asm/time.h index 27ccb764fda..dc779dfcf25 100644 --- a/arch/powerpc/include/asm/time.h +++ b/arch/powerpc/include/asm/time.h @@ -28,16 +28,12 @@ extern unsigned long tb_ticks_per_jiffy; extern unsigned long tb_ticks_per_usec; extern unsigned long tb_ticks_per_sec; -extern u64 tb_to_xs; -extern unsigned tb_to_us; struct rtc_time; extern void to_tm(int tim, struct rtc_time * tm); extern void GregorianDay(struct rtc_time *tm); -extern time_t last_rtc_update; extern void generic_calibrate_decr(void); -extern void wakeup_decrementer(void); extern void snapshot_timebase(void); extern void set_dec_cpu6(unsigned int val); @@ -204,9 +200,6 @@ static inline unsigned long tb_ticks_since(unsigned long tstamp) extern u64 mulhdu(u64, u64); #endif -extern void smp_space_timers(unsigned int); - -extern unsigned mulhwu_scale_factor(unsigned, unsigned); extern void div128_by_32(u64 dividend_high, u64 dividend_low, unsigned divisor, struct div_result *dr); diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 5c196d1086d..8764daad309 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -288,8 +288,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus) max_cpus = NR_CPUS; else max_cpus = 1; - - smp_space_timers(max_cpus); for_each_possible_cpu(cpu) if (cpu != boot_cpuid) diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 5adebaf47f1..ccb8759c853 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -149,16 +149,6 @@ unsigned long tb_ticks_per_usec = 100; /* sane default */ EXPORT_SYMBOL(tb_ticks_per_usec); unsigned long tb_ticks_per_sec; EXPORT_SYMBOL(tb_ticks_per_sec); /* for cputime_t conversions */ -u64 tb_to_xs; -unsigned tb_to_us; - -#define TICKLEN_SCALE NTP_SCALE_SHIFT -static u64 last_tick_len; /* units are ns / 2^TICKLEN_SCALE */ -static u64 ticklen_to_xs; /* 0.64 fraction */ - -/* If last_tick_len corresponds to about 1/HZ seconds, then - last_tick_len << TICKLEN_SHIFT will be about 2^63. */ -#define TICKLEN_SHIFT (63 - 30 - TICKLEN_SCALE + SHIFT_HZ) DEFINE_SPINLOCK(rtc_lock); EXPORT_SYMBOL_GPL(rtc_lock); @@ -174,7 +164,6 @@ unsigned long ppc_proc_freq; EXPORT_SYMBOL(ppc_proc_freq); unsigned long ppc_tb_freq; -static u64 tb_last_jiffy __cacheline_aligned_in_smp; static DEFINE_PER_CPU(u64, last_jiffy); #ifdef CONFIG_VIRT_CPU_ACCOUNTING @@ -446,7 +435,6 @@ EXPORT_SYMBOL(profile_pc); static int __init iSeries_tb_recal(void) { - struct div_result divres; unsigned long titan, tb; /* Make sure we only run on iSeries */ @@ -477,10 +465,7 @@ static int __init iSeries_tb_recal(void) tb_ticks_per_jiffy = new_tb_ticks_per_jiffy; tb_ticks_per_sec = new_tb_ticks_per_sec; calc_cputime_factors(); - div128_by_32( XSEC_PER_SEC, 0, tb_ticks_per_sec, &divres ); - tb_to_xs = divres.result_low; vdso_data->tb_ticks_per_sec = tb_ticks_per_sec; - vdso_data->tb_to_xs = tb_to_xs; setup_cputime_one_jiffy(); } else { @@ -643,27 +628,9 @@ void timer_interrupt(struct pt_regs * regs) trace_timer_interrupt_exit(regs); } -void wakeup_decrementer(void) -{ - unsigned long ticks; - - /* - * The timebase gets saved on sleep and restored on wakeup, - * so all we need to do is to reset the decrementer. - */ - ticks = tb_ticks_since(__get_cpu_var(last_jiffy)); - if (ticks < tb_ticks_per_jiffy) - ticks = tb_ticks_per_jiffy - ticks; - else - ticks = 1; - set_dec(ticks); -} - #ifdef CONFIG_SUSPEND -void generic_suspend_disable_irqs(void) +static void generic_suspend_disable_irqs(void) { - preempt_disable(); - /* Disable the decrementer, so that it doesn't interfere * with suspending. */ @@ -673,12 +640,9 @@ void generic_suspend_disable_irqs(void) set_dec(0x7fffffff); } -void generic_suspend_enable_irqs(void) +static void generic_suspend_enable_irqs(void) { - wakeup_decrementer(); - local_irq_enable(); - preempt_enable(); } /* Overrides the weak version in kernel/power/main.c */ @@ -698,23 +662,6 @@ void arch_suspend_enable_irqs(void) } #endif -#ifdef CONFIG_SMP -void __init smp_space_timers(unsigned int max_cpus) -{ - int i; - u64 previous_tb = per_cpu(last_jiffy, boot_cpuid); - - /* make sure tb > per_cpu(last_jiffy, cpu) for all cpus always */ - previous_tb -= tb_ticks_per_jiffy; - - for_each_possible_cpu(i) { - if (i == boot_cpuid) - continue; - per_cpu(last_jiffy, i) = previous_tb; - } -} -#endif - /* * Scheduler clock - returns current time in nanosec units. * @@ -1014,15 +961,13 @@ void secondary_cpu_time_init(void) /* This function is only called on the boot processor */ void __init time_init(void) { - unsigned long flags; struct div_result res; - u64 scale, x; + u64 scale; unsigned shift; if (__USE_RTC()) { /* 601 processor: dec counts down by 128 every 128ns */ ppc_tb_freq = 1000000000; - tb_last_jiffy = get_rtcl(); } else { /* Normal PowerPC with timebase register */ ppc_md.calibrate_decr(); @@ -1030,49 +975,14 @@ void __init time_init(void) ppc_tb_freq / 1000000, ppc_tb_freq % 1000000); printk(KERN_DEBUG "time_init: processor frequency = %lu.%.6lu MHz\n", ppc_proc_freq / 1000000, ppc_proc_freq % 1000000); - tb_last_jiffy = get_tb(); } tb_ticks_per_jiffy = ppc_tb_freq / HZ; tb_ticks_per_sec = ppc_tb_freq; tb_ticks_per_usec = ppc_tb_freq / 1000000; - tb_to_us = mulhwu_scale_factor(ppc_tb_freq, 1000000); calc_cputime_factors(); setup_cputime_one_jiffy(); - /* - * Calculate the length of each tick in ns. It will not be - * exactly 1e9/HZ unless ppc_tb_freq is divisible by HZ. - * We compute 1e9 * tb_ticks_per_jiffy / ppc_tb_freq, - * rounded up. - */ - x = (u64) NSEC_PER_SEC * tb_ticks_per_jiffy + ppc_tb_freq - 1; - do_div(x, ppc_tb_freq); - tick_nsec = x; - last_tick_len = x << TICKLEN_SCALE; - - /* - * Compute ticklen_to_xs, which is a factor which gets multiplied - * by (last_tick_len << TICKLEN_SHIFT) to get a tb_to_xs value. - * It is computed as: - * ticklen_to_xs = 2^N / (tb_ticks_per_jiffy * 1e9) - * where N = 64 + 20 - TICKLEN_SCALE - TICKLEN_SHIFT - * which turns out to be N = 51 - SHIFT_HZ. - * This gives the result as a 0.64 fixed-point fraction. - * That value is reduced by an offset amounting to 1 xsec per - * 2^31 timebase ticks to avoid problems with time going backwards - * by 1 xsec when we do timer_recalc_offset due to losing the - * fractional xsec. That offset is equal to ppc_tb_freq/2^51 - * since there are 2^20 xsec in a second. - */ - div128_by_32((1ULL << 51) - ppc_tb_freq, 0, - tb_ticks_per_jiffy << SHIFT_HZ, &res); - div128_by_32(res.result_high, res.result_low, NSEC_PER_SEC, &res); - ticklen_to_xs = res.result_low; - - /* Compute tb_to_xs from tick_nsec */ - tb_to_xs = mulhdu(last_tick_len << TICKLEN_SHIFT, ticklen_to_xs); - /* * Compute scale factor for sched_clock. * The calibrate_decr() function has set tb_ticks_per_sec, @@ -1094,21 +1004,14 @@ void __init time_init(void) /* Save the current timebase to pretty up CONFIG_PRINTK_TIME */ boot_tb = get_tb_or_rtc(); - write_seqlock_irqsave(&xtime_lock, flags); - /* If platform provided a timezone (pmac), we correct the time */ if (timezone_offset) { sys_tz.tz_minuteswest = -timezone_offset / 60; sys_tz.tz_dsttime = 0; } - vdso_data->tb_orig_stamp = tb_last_jiffy; vdso_data->tb_update_count = 0; vdso_data->tb_ticks_per_sec = tb_ticks_per_sec; - vdso_data->stamp_xsec = (u64) xtime.tv_sec * XSEC_PER_SEC; - vdso_data->tb_to_xs = tb_to_xs; - - write_sequnlock_irqrestore(&xtime_lock, flags); /* Start the decrementer on CPUs that have manual control * such as BookE @@ -1202,39 +1105,6 @@ void to_tm(int tim, struct rtc_time * tm) GregorianDay(tm); } -/* Auxiliary function to compute scaling factors */ -/* Actually the choice of a timebase running at 1/4 the of the bus - * frequency giving resolution of a few tens of nanoseconds is quite nice. - * It makes this computation very precise (27-28 bits typically) which - * is optimistic considering the stability of most processor clock - * oscillators and the precision with which the timebase frequency - * is measured but does not harm. - */ -unsigned mulhwu_scale_factor(unsigned inscale, unsigned outscale) -{ - unsigned mlt=0, tmp, err; - /* No concern for performance, it's done once: use a stupid - * but safe and compact method to find the multiplier. - */ - - for (tmp = 1U<<31; tmp != 0; tmp >>= 1) { - if (mulhwu(inscale, mlt|tmp) < outscale) - mlt |= tmp; - } - - /* We might still be off by 1 for the best approximation. - * A side effect of this is that if outscale is too large - * the returned value will be zero. - * Many corner cases have been checked and seem to work, - * some might have been forgotten in the test however. - */ - - err = inscale * (mlt+1); - if (err <= inscale/2) - mlt++; - return mlt; -} - /* * Divide a 128-bit dividend by a 32-bit divisor, leaving a 128 bit * result. diff --git a/arch/powerpc/platforms/52xx/lite5200_pm.c b/arch/powerpc/platforms/52xx/lite5200_pm.c index b5c753db125..80234e5921f 100644 --- a/arch/powerpc/platforms/52xx/lite5200_pm.c +++ b/arch/powerpc/platforms/52xx/lite5200_pm.c @@ -216,9 +216,6 @@ static int lite5200_pm_enter(suspend_state_t state) lite5200_restore_regs(); - /* restart jiffies */ - wakeup_decrementer(); - iounmap(mbar); return 0; } diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pm.c b/arch/powerpc/platforms/52xx/mpc52xx_pm.c index 76722532bd9..568cef63627 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_pm.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_pm.c @@ -171,9 +171,6 @@ int mpc52xx_pm_enter(suspend_state_t state) /* restore SRAM */ memcpy(sram, saved_sram, sram_size); - /* restart jiffies */ - wakeup_decrementer(); - /* reenable interrupts in PIC */ out_be32(&intr->main_mask, intr_main_mask); diff --git a/arch/powerpc/platforms/powermac/cpufreq_32.c b/arch/powerpc/platforms/powermac/cpufreq_32.c index 1e9eba175ff..415ca6d6b27 100644 --- a/arch/powerpc/platforms/powermac/cpufreq_32.c +++ b/arch/powerpc/platforms/powermac/cpufreq_32.c @@ -310,8 +310,12 @@ static int pmu_set_cpu_speed(int low_speed) /* Restore low level PMU operations */ pmu_unlock(); - /* Restore decrementer */ - wakeup_decrementer(); + /* + * Restore decrementer; we'll take a decrementer interrupt + * as soon as interrupts are re-enabled and the generic + * clockevents code will reprogram it with the right value. + */ + set_dec(1); /* Restore interrupts */ mpic_cpu_set_priority(pic_prio); -- cgit v1.2.3-18-g5258 From 8fe93f8d850a24581e9d47df5814b257fe451052 Mon Sep 17 00:00:00 2001 From: Brian King Date: Wed, 7 Jul 2010 12:31:01 +0000 Subject: powerpc/pseries: Migration code reorganization / hibernation prep Partition hibernation will use some of the same code as is currently used for Live Partition Migration. This function further abstracts this code such that code outside of rtas.c can utilize it. It also changes the error field in the suspend me data structure to be an atomic type, since it is set and checked on different cpus without any barriers or locking. Signed-off-by: Brian King Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/hvcall.h | 1 + arch/powerpc/include/asm/rtas.h | 10 ++++ arch/powerpc/kernel/rtas.c | 105 +++++++++++++++++++++++++------------- 3 files changed, 81 insertions(+), 35 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h index 5119b7db314..de03ca58db5 100644 --- a/arch/powerpc/include/asm/hvcall.h +++ b/arch/powerpc/include/asm/hvcall.h @@ -74,6 +74,7 @@ #define H_NOT_ENOUGH_RESOURCES -44 #define H_R_STATE -45 #define H_RESCINDEND -46 +#define H_MULTI_THREADS_ACTIVE -9005 /* Long Busy is a condition that can be returned by the firmware diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h index 20de73c3668..8941c54b30e 100644 --- a/arch/powerpc/include/asm/rtas.h +++ b/arch/powerpc/include/asm/rtas.h @@ -63,6 +63,14 @@ struct rtas_t { struct device_node *dev; /* virtual address pointer */ }; +struct rtas_suspend_me_data { + atomic_t working; /* number of cpus accessing this struct */ + atomic_t done; + int token; /* ibm,suspend-me */ + atomic_t error; + struct completion *complete; /* wait on this until working == 0 */ +}; + /* RTAS event classes */ #define RTAS_INTERNAL_ERROR 0x80000000 /* set bit 0 */ #define RTAS_EPOW_WARNING 0x40000000 /* set bit 1 */ @@ -174,6 +182,8 @@ extern int rtas_set_indicator(int indicator, int index, int new_value); extern int rtas_set_indicator_fast(int indicator, int index, int new_value); extern void rtas_progress(char *s, unsigned short hex); extern void rtas_initialize(void); +extern int rtas_suspend_cpu(struct rtas_suspend_me_data *data); +extern int rtas_suspend_last_cpu(struct rtas_suspend_me_data *data); struct rtc_time; extern unsigned long rtas_get_boot_time(void); diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index 0e1ec6f746f..41cfde0ca11 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -47,14 +47,6 @@ struct rtas_t rtas = { }; EXPORT_SYMBOL(rtas); -struct rtas_suspend_me_data { - atomic_t working; /* number of cpus accessing this struct */ - atomic_t done; - int token; /* ibm,suspend-me */ - int error; - struct completion *complete; /* wait on this until working == 0 */ -}; - DEFINE_SPINLOCK(rtas_data_buf_lock); EXPORT_SYMBOL(rtas_data_buf_lock); @@ -714,14 +706,53 @@ void rtas_os_term(char *str) static int ibm_suspend_me_token = RTAS_UNKNOWN_SERVICE; #ifdef CONFIG_PPC_PSERIES -static void rtas_percpu_suspend_me(void *info) +static int __rtas_suspend_last_cpu(struct rtas_suspend_me_data *data, int wake_when_done) +{ + u16 slb_size = mmu_slb_size; + int rc = H_MULTI_THREADS_ACTIVE; + int cpu; + + slb_set_size(SLB_MIN_SIZE); + printk(KERN_DEBUG "calling ibm,suspend-me on cpu %i\n", smp_processor_id()); + + while (rc == H_MULTI_THREADS_ACTIVE && !atomic_read(&data->done) && + !atomic_read(&data->error)) + rc = rtas_call(data->token, 0, 1, NULL); + + if (rc || atomic_read(&data->error)) { + printk(KERN_DEBUG "ibm,suspend-me returned %d\n", rc); + slb_set_size(slb_size); + } + + if (atomic_read(&data->error)) + rc = atomic_read(&data->error); + + atomic_set(&data->error, rc); + + if (wake_when_done) { + atomic_set(&data->done, 1); + + for_each_online_cpu(cpu) + plpar_hcall_norets(H_PROD, get_hard_smp_processor_id(cpu)); + } + + if (atomic_dec_return(&data->working) == 0) + complete(data->complete); + + return rc; +} + +int rtas_suspend_last_cpu(struct rtas_suspend_me_data *data) +{ + atomic_inc(&data->working); + return __rtas_suspend_last_cpu(data, 0); +} + +static int __rtas_suspend_cpu(struct rtas_suspend_me_data *data, int wake_when_done) { long rc = H_SUCCESS; unsigned long msr_save; - u16 slb_size = mmu_slb_size; int cpu; - struct rtas_suspend_me_data *data = - (struct rtas_suspend_me_data *)info; atomic_inc(&data->working); @@ -729,7 +760,7 @@ static void rtas_percpu_suspend_me(void *info) msr_save = mfmsr(); mtmsr(msr_save & ~(MSR_EE)); - while (rc == H_SUCCESS && !atomic_read(&data->done)) + while (rc == H_SUCCESS && !atomic_read(&data->done) && !atomic_read(&data->error)) rc = plpar_hcall_norets(H_JOIN); mtmsr(msr_save); @@ -741,33 +772,37 @@ static void rtas_percpu_suspend_me(void *info) /* All other cpus are in H_JOIN, this cpu does * the suspend. */ - slb_set_size(SLB_MIN_SIZE); - printk(KERN_DEBUG "calling ibm,suspend-me on cpu %i\n", - smp_processor_id()); - data->error = rtas_call(data->token, 0, 1, NULL); - - if (data->error) { - printk(KERN_DEBUG "ibm,suspend-me returned %d\n", - data->error); - slb_set_size(slb_size); - } + return __rtas_suspend_last_cpu(data, wake_when_done); } else { printk(KERN_ERR "H_JOIN on cpu %i failed with rc = %ld\n", smp_processor_id(), rc); - data->error = rc; + atomic_set(&data->error, rc); } - atomic_set(&data->done, 1); + if (wake_when_done) { + atomic_set(&data->done, 1); - /* This cpu did the suspend or got an error; in either case, - * we need to prod all other other cpus out of join state. - * Extra prods are harmless. - */ - for_each_online_cpu(cpu) - plpar_hcall_norets(H_PROD, get_hard_smp_processor_id(cpu)); + /* This cpu did the suspend or got an error; in either case, + * we need to prod all other other cpus out of join state. + * Extra prods are harmless. + */ + for_each_online_cpu(cpu) + plpar_hcall_norets(H_PROD, get_hard_smp_processor_id(cpu)); + } out: if (atomic_dec_return(&data->working) == 0) complete(data->complete); + return rc; +} + +int rtas_suspend_cpu(struct rtas_suspend_me_data *data) +{ + return __rtas_suspend_cpu(data, 0); +} + +static void rtas_percpu_suspend_me(void *info) +{ + __rtas_suspend_cpu((struct rtas_suspend_me_data *)info, 1); } static int rtas_ibm_suspend_me(struct rtas_args *args) @@ -802,22 +837,22 @@ static int rtas_ibm_suspend_me(struct rtas_args *args) atomic_set(&data.working, 0); atomic_set(&data.done, 0); + atomic_set(&data.error, 0); data.token = rtas_token("ibm,suspend-me"); - data.error = 0; data.complete = &done; /* Call function on all CPUs. One of us will make the * rtas call */ if (on_each_cpu(rtas_percpu_suspend_me, &data, 0)) - data.error = -EINVAL; + atomic_set(&data.error, -EINVAL); wait_for_completion(&done); - if (data.error != 0) + if (atomic_read(&data.error) != 0) printk(KERN_ERR "Error doing global join\n"); - return data.error; + return atomic_read(&data.error); } #else /* CONFIG_PPC_PSERIES */ static int rtas_ibm_suspend_me(struct rtas_args *args) -- cgit v1.2.3-18-g5258 From 32d8ad4e621d6620e925cf540ef1d35aa6fa5a7b Mon Sep 17 00:00:00 2001 From: Brian King Date: Wed, 7 Jul 2010 12:31:02 +0000 Subject: powerpc/pseries: Partition hibernation support Enables support for HMC initiated partition hibernation. This is a firmware assisted hibernation, since the firmware handles writing the memory out to disk, along with other partition information, so we just mimic suspend to ram. Signed-off-by: Brian King Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/Kconfig | 2 +- arch/powerpc/include/asm/machdep.h | 1 + arch/powerpc/platforms/pseries/Makefile | 4 + arch/powerpc/platforms/pseries/hotplug-cpu.c | 3 + arch/powerpc/platforms/pseries/suspend.c | 214 +++++++++++++++++++++++++++ 5 files changed, 223 insertions(+), 1 deletion(-) create mode 100644 arch/powerpc/platforms/pseries/suspend.c (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 89bc2e89539..25b28fdc676 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -219,7 +219,7 @@ config ARCH_HIBERNATION_POSSIBLE config ARCH_SUSPEND_POSSIBLE def_bool y depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx || \ - PPC_85xx || PPC_86xx + PPC_85xx || PPC_86xx || PPC_PSERIES config PPC_DCR_NATIVE bool diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h index 7716e68f7b1..2bad6e5855a 100644 --- a/arch/powerpc/include/asm/machdep.h +++ b/arch/powerpc/include/asm/machdep.h @@ -266,6 +266,7 @@ struct machdep_calls { void (*suspend_disable_irqs)(void); void (*suspend_enable_irqs)(void); #endif + int (*suspend_disable_cpu)(void); #ifdef CONFIG_ARCH_CPU_PROBE_RELEASE ssize_t (*cpu_probe)(const char *, size_t); diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index 3dbef309bc8..046ace9c438 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -26,3 +26,7 @@ obj-$(CONFIG_HCALL_STATS) += hvCall_inst.o obj-$(CONFIG_PHYP_DUMP) += phyp_dump.o obj-$(CONFIG_CMM) += cmm.o obj-$(CONFIG_DTL) += dtl.o + +ifeq ($(CONFIG_PPC_PSERIES),y) +obj-$(CONFIG_SUSPEND) += suspend.o +endif diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c index 8f85f399ab9..bbe50763536 100644 --- a/arch/powerpc/platforms/pseries/hotplug-cpu.c +++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c @@ -116,6 +116,9 @@ static void pseries_mach_cpu_die(void) if (get_preferred_offline_state(cpu) == CPU_STATE_INACTIVE) { set_cpu_current_state(cpu, CPU_STATE_INACTIVE); + if (ppc_md.suspend_disable_cpu) + ppc_md.suspend_disable_cpu(); + cede_latency_hint = 2; get_lppaca()->idle = 1; diff --git a/arch/powerpc/platforms/pseries/suspend.c b/arch/powerpc/platforms/pseries/suspend.c new file mode 100644 index 00000000000..ed72098bb4e --- /dev/null +++ b/arch/powerpc/platforms/pseries/suspend.c @@ -0,0 +1,214 @@ +/* + * Copyright (C) 2010 Brian King IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +static u64 stream_id; +static struct sys_device suspend_sysdev; +static DECLARE_COMPLETION(suspend_work); +static struct rtas_suspend_me_data suspend_data; +static atomic_t suspending; + +/** + * pseries_suspend_begin - First phase of hibernation + * + * Check to ensure we are in a valid state to hibernate + * + * Return value: + * 0 on success / other on failure + **/ +static int pseries_suspend_begin(suspend_state_t state) +{ + long vasi_state, rc; + unsigned long retbuf[PLPAR_HCALL_BUFSIZE]; + + /* Make sure the state is valid */ + rc = plpar_hcall(H_VASI_STATE, retbuf, stream_id); + + vasi_state = retbuf[0]; + + if (rc) { + pr_err("pseries_suspend_begin: vasi_state returned %ld\n",rc); + return rc; + } else if (vasi_state == H_VASI_ENABLED) { + return -EAGAIN; + } else if (vasi_state != H_VASI_SUSPENDING) { + pr_err("pseries_suspend_begin: vasi_state returned state %ld\n", + vasi_state); + return -EIO; + } + + return 0; +} + +/** + * pseries_suspend_cpu - Suspend a single CPU + * + * Makes the H_JOIN call to suspend the CPU + * + **/ +static int pseries_suspend_cpu(void) +{ + if (atomic_read(&suspending)) + return rtas_suspend_cpu(&suspend_data); + return 0; +} + +/** + * pseries_suspend_enter - Final phase of hibernation + * + * Return value: + * 0 on success / other on failure + **/ +static int pseries_suspend_enter(suspend_state_t state) +{ + int rc = rtas_suspend_last_cpu(&suspend_data); + + atomic_set(&suspending, 0); + atomic_set(&suspend_data.done, 1); + return rc; +} + +/** + * pseries_prepare_late - Prepare to suspend all other CPUs + * + * Return value: + * 0 on success / other on failure + **/ +static int pseries_prepare_late(void) +{ + atomic_set(&suspending, 1); + atomic_set(&suspend_data.working, 0); + atomic_set(&suspend_data.done, 0); + atomic_set(&suspend_data.error, 0); + suspend_data.complete = &suspend_work; + INIT_COMPLETION(suspend_work); + return 0; +} + +/** + * store_hibernate - Initiate partition hibernation + * @classdev: sysdev class struct + * @attr: class device attribute struct + * @buf: buffer + * @count: buffer size + * + * Write the stream ID received from the HMC to this file + * to trigger hibernating the partition + * + * Return value: + * number of bytes printed to buffer / other on failure + **/ +static ssize_t store_hibernate(struct sysdev_class *classdev, + struct sysdev_class_attribute *attr, + const char *buf, size_t count) +{ + int rc; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + stream_id = simple_strtoul(buf, NULL, 16); + + do { + rc = pseries_suspend_begin(PM_SUSPEND_MEM); + if (rc == -EAGAIN) + ssleep(1); + } while (rc == -EAGAIN); + + if (!rc) + rc = pm_suspend(PM_SUSPEND_MEM); + + stream_id = 0; + + if (!rc) + rc = count; + return rc; +} + +static SYSDEV_CLASS_ATTR(hibernate, S_IWUSR, NULL, store_hibernate); + +static struct sysdev_class suspend_sysdev_class = { + .name = "power", +}; + +static struct platform_suspend_ops pseries_suspend_ops = { + .valid = suspend_valid_only_mem, + .begin = pseries_suspend_begin, + .prepare_late = pseries_prepare_late, + .enter = pseries_suspend_enter, +}; + +/** + * pseries_suspend_sysfs_register - Register with sysfs + * + * Return value: + * 0 on success / other on failure + **/ +static int pseries_suspend_sysfs_register(struct sys_device *sysdev) +{ + int rc; + + if ((rc = sysdev_class_register(&suspend_sysdev_class))) + return rc; + + sysdev->id = 0; + sysdev->cls = &suspend_sysdev_class; + + if ((rc = sysdev_class_create_file(&suspend_sysdev_class, &attr_hibernate))) + goto class_unregister; + + return 0; + +class_unregister: + sysdev_class_unregister(&suspend_sysdev_class); + return rc; +} + +/** + * pseries_suspend_init - initcall for pSeries suspend + * + * Return value: + * 0 on success / other on failure + **/ +static int __init pseries_suspend_init(void) +{ + int rc; + + if (!machine_is(pseries) || !firmware_has_feature(FW_FEATURE_LPAR)) + return 0; + + suspend_data.token = rtas_token("ibm,suspend-me"); + if (suspend_data.token == RTAS_UNKNOWN_SERVICE) + return 0; + + if ((rc = pseries_suspend_sysfs_register(&suspend_sysdev))) + return rc; + + ppc_md.suspend_disable_cpu = pseries_suspend_cpu; + suspend_set_ops(&pseries_suspend_ops); + return 0; +} + +__initcall(pseries_suspend_init); -- cgit v1.2.3-18-g5258 From 6901c6cca1271d1724fc15e9937e0820e2d2fbd5 Mon Sep 17 00:00:00 2001 From: Kulikov Vasiliy Date: Sat, 3 Jul 2010 06:03:48 +0000 Subject: powerpc/pseries/eeh: Use for_each_pci_dev() Use for_each_pci_dev() to simplify the code. Signed-off-by: Kulikov Vasiliy Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/eeh_cache.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/eeh_cache.c b/arch/powerpc/platforms/pseries/eeh_cache.c index 30b987b73c2..8ed0d2d0e1b 100644 --- a/arch/powerpc/platforms/pseries/eeh_cache.c +++ b/arch/powerpc/platforms/pseries/eeh_cache.c @@ -288,8 +288,7 @@ void __init pci_addr_cache_build(void) spin_lock_init(&pci_io_addr_cache_root.piar_lock); - while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { - + for_each_pci_dev(dev) { pci_addr_cache_insert_device(dev); dn = pci_device_to_OF_node(dev); -- cgit v1.2.3-18-g5258 From d10ac3734d07bee675384d22d06883b3c57b1524 Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Wed, 30 Jun 2010 10:23:31 +0000 Subject: powerpc/fsl-booke: Fix comments in mmu code that mention BATS There are no BATS on BookE - we have the TLBCAM instead. Also correct the page size information to included extended sizes. We don't actually allow a 4G page size to be used, so comment on that as well. Signed-off-by: Becky Bruce Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/fsl_booke_mmu.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c index cdc7526e9c9..4b66a1ece6d 100644 --- a/arch/powerpc/mm/fsl_booke_mmu.c +++ b/arch/powerpc/mm/fsl_booke_mmu.c @@ -104,9 +104,10 @@ unsigned long p_mapped_by_tlbcam(phys_addr_t pa) } /* - * Set up one of the I/D BAT (block address translation) register pairs. - * The parameters are not checked; in particular size must be a power - * of 4 between 4k and 256M. + * Set up a variable-size TLB entry (tlbcam). The parameters are not checked; + * in particular size must be a power of 4 between 4k and 256M (or 1G, for cpus + * that support extended page sizes). Note that while some cpus support a + * page size of 4G, we don't allow its use here. */ static void settlbcam(int index, unsigned long virt, phys_addr_t phys, unsigned long size, unsigned long flags, unsigned int pid) -- cgit v1.2.3-18-g5258 From 66953ebef60ffe94650a735b445f1495d989c523 Mon Sep 17 00:00:00 2001 From: Matthew McClintock Date: Tue, 29 Jun 2010 09:42:26 +0000 Subject: powerpc/mpic: Add ability to reset a core via MPIC We need the ability to reset cores for use with kexec/kdump for SMP systems. Calling this function with the specific core you want to reset will cause the CPU to spin in reset. Signed-off-by: Matthew McClintock Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/sysdev/mpic.c | 18 ++++++++++++++++++ arch/powerpc/sysdev/mpic.h | 1 + 2 files changed, 19 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 20b73c025a4..7c1342618a3 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -1636,6 +1636,24 @@ void __devinit smp_mpic_setup_cpu(int cpu) { mpic_setup_this_cpu(); } + +void mpic_reset_core(int cpu) +{ + struct mpic *mpic = mpic_primary; + u32 pir; + int cpuid = get_hard_smp_processor_id(cpu); + + /* Set target bit for core reset */ + pir = mpic_read(mpic->gregs, MPIC_INFO(GREG_PROCESSOR_INIT)); + pir |= (1 << cpuid); + mpic_write(mpic->gregs, MPIC_INFO(GREG_PROCESSOR_INIT), pir); + mpic_read(mpic->gregs, MPIC_INFO(GREG_PROCESSOR_INIT)); + + /* Restore target bit after reset complete */ + pir &= ~(1 << cpuid); + mpic_write(mpic->gregs, MPIC_INFO(GREG_PROCESSOR_INIT), pir); + mpic_read(mpic->gregs, MPIC_INFO(GREG_PROCESSOR_INIT)); +} #endif /* CONFIG_SMP */ #ifdef CONFIG_PM diff --git a/arch/powerpc/sysdev/mpic.h b/arch/powerpc/sysdev/mpic.h index eff433c322a..e4a6df77b8d 100644 --- a/arch/powerpc/sysdev/mpic.h +++ b/arch/powerpc/sysdev/mpic.h @@ -37,5 +37,6 @@ static inline int mpic_pasemi_msi_init(struct mpic *mpic) extern int mpic_set_irq_type(unsigned int virq, unsigned int flow_type); extern void mpic_set_vector(unsigned int virq, unsigned int vector); extern int mpic_set_affinity(unsigned int irq, const struct cpumask *cpumask); +extern void mpic_reset_core(int cpu); #endif /* _POWERPC_SYSDEV_MPIC_H */ -- cgit v1.2.3-18-g5258 From 51c7fdba40e741dfe18455b5e4240b70c422bf2e Mon Sep 17 00:00:00 2001 From: Denis Kirjanov Date: Wed, 16 Jun 2010 04:34:44 +0000 Subject: powerpc/iseries: Fix constant warning Fix smatch warning: constant 0x8000000000000000 is so big it is unsigned long Signed-off-by: Denis Kirjanov Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/abs_addr.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/abs_addr.h b/arch/powerpc/include/asm/abs_addr.h index 98324c5a828..c3bffc3fa1d 100644 --- a/arch/powerpc/include/asm/abs_addr.h +++ b/arch/powerpc/include/asm/abs_addr.h @@ -69,7 +69,7 @@ static inline unsigned long phys_to_abs(unsigned long pa) * Legacy iSeries Hypervisor calls */ #define iseries_hv_addr(virtaddr) \ - (0x8000000000000000 | virt_to_abs(virtaddr)) + (0x8000000000000000UL | virt_to_abs(virtaddr)) #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_ABS_ADDR_H */ -- cgit v1.2.3-18-g5258 From ae01f84b93b274e2f215bdf6d0b46435679b5f9a Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Mon, 31 May 2010 18:45:11 +0000 Subject: powerpc: Optimise per cpu accesses on 64bit Now we dynamically allocate the paca array, it takes an extra load whenever we want to access another cpu's paca. One place we do that a lot is per cpu variables. A simple example: DEFINE_PER_CPU(unsigned long, vara); unsigned long test4(int cpu) { return per_cpu(vara, cpu); } This takes 4 loads, 5 if you include the actual load of the per cpu variable: ld r11,-32760(r30) # load address of paca pointer ld r9,-32768(r30) # load link address of percpu variable sldi r3,r29,9 # get offset into paca (each entry is 512 bytes) ld r0,0(r11) # load paca pointer add r3,r0,r3 # paca + offset ld r11,64(r3) # load paca[cpu].data_offset ldx r3,r9,r11 # load per cpu variable If we remove the ppc64 specific per_cpu_offset(), we get the generic one which indexes into a statically allocated array. This removes one load and one add: ld r11,-32760(r30) # load address of __per_cpu_offset ld r9,-32768(r30) # load link address of percpu variable sldi r3,r29,3 # get offset into __per_cpu_offset (each entry 8 bytes) ldx r11,r11,r3 # load __per_cpu_offset[cpu] ldx r3,r9,r11 # load per cpu variable Having all the offsets in one array also helps when iterating over a per cpu variable across a number of cpus, such as in the scheduler. Before we would need to load one paca cacheline when calculating each per cpu offset. Now we have 16 (128 / sizeof(long)) per cpu offsets in each cacheline. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/percpu.h | 3 --- arch/powerpc/kernel/asm-offsets.c | 1 - arch/powerpc/kernel/setup_64.c | 9 +++++++-- 3 files changed, 7 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/percpu.h b/arch/powerpc/include/asm/percpu.h index f879252b7ea..2cedefddba3 100644 --- a/arch/powerpc/include/asm/percpu.h +++ b/arch/powerpc/include/asm/percpu.h @@ -1,7 +1,6 @@ #ifndef _ASM_POWERPC_PERCPU_H_ #define _ASM_POWERPC_PERCPU_H_ #ifdef __powerpc64__ -#include /* * Same as asm-generic/percpu.h, except that we store the per cpu offset @@ -12,9 +11,7 @@ #include -#define __per_cpu_offset(cpu) (paca[cpu].data_offset) #define __my_cpu_offset local_paca->data_offset -#define per_cpu_offset(x) (__per_cpu_offset(x)) #endif /* CONFIG_SMP */ #endif /* __powerpc64__ */ diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index acbbac6aaa2..1c0607ddccc 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -194,7 +194,6 @@ int main(void) DEFINE(PACA_STARTSPURR, offsetof(struct paca_struct, startspurr)); DEFINE(PACA_USER_TIME, offsetof(struct paca_struct, user_time)); DEFINE(PACA_SYSTEM_TIME, offsetof(struct paca_struct, system_time)); - DEFINE(PACA_DATA_OFFSET, offsetof(struct paca_struct, data_offset)); DEFINE(PACA_TRAP_SAVE, offsetof(struct paca_struct, trap_save)); #ifdef CONFIG_KVM_BOOK3S_64_HANDLER DEFINE(PACA_KVM_SVCPU, offsetof(struct paca_struct, shadow_vcpu)); diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 643dcac40fc..c352f322dbd 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -600,6 +600,9 @@ static int pcpu_cpu_distance(unsigned int from, unsigned int to) return REMOTE_DISTANCE; } +unsigned long __per_cpu_offset[NR_CPUS] __read_mostly; +EXPORT_SYMBOL(__per_cpu_offset); + void __init setup_per_cpu_areas(void) { const size_t dyn_size = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE; @@ -624,8 +627,10 @@ void __init setup_per_cpu_areas(void) panic("cannot initialize percpu area (err=%d)", rc); delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start; - for_each_possible_cpu(cpu) - paca[cpu].data_offset = delta + pcpu_unit_offsets[cpu]; + for_each_possible_cpu(cpu) { + __per_cpu_offset[cpu] = delta + pcpu_unit_offsets[cpu]; + paca[cpu].data_offset = __per_cpu_offset[cpu]; + } } #endif -- cgit v1.2.3-18-g5258 From b08e281b5ae681abcbc1815c13d4a3eb3df4ff1b Mon Sep 17 00:00:00 2001 From: Mark Nelson Date: Wed, 26 May 2010 21:40:39 +0000 Subject: powerpc/pseries: Rename RAS_VECTOR_OFFSET to RTAS_VECTOR_EXTERNAL_INTERRUPT and move to rtas.h The RAS code has a #define, RAS_VECTOR_OFFSET, that's used in the check-exception RTAS call for the vector offset of the exception. We'll be using this same vector offset for the upcoming IO Event interrupts code (0x500) so let's move it to include/asm/rtas.h and call it RTAS_VECTOR_EXTERNAL_INTERRUPT. Signed-off-by: Mark Nelson Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/rtas.h | 3 +++ arch/powerpc/platforms/pseries/ras.c | 5 ++--- 2 files changed, 5 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h index 8941c54b30e..3d35f8ae377 100644 --- a/arch/powerpc/include/asm/rtas.h +++ b/arch/powerpc/include/asm/rtas.h @@ -145,6 +145,9 @@ struct rtas_suspend_me_data { #define RTAS_TYPE_PMGM_CONFIG_CHANGE 0x70 #define RTAS_TYPE_PMGM_SERVICE_PROC 0x71 +/* RTAS check-exception vector offset */ +#define RTAS_VECTOR_EXTERNAL_INTERRUPT 0x500 + struct rtas_error_log { unsigned long version:8; /* Architectural version */ unsigned long severity:3; /* Severity level of error */ diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c index 41a3e9a039e..a4fc6da87c2 100644 --- a/arch/powerpc/platforms/pseries/ras.c +++ b/arch/powerpc/platforms/pseries/ras.c @@ -61,7 +61,6 @@ static int ras_check_exception_token; #define EPOW_SENSOR_TOKEN 9 #define EPOW_SENSOR_INDEX 0 -#define RAS_VECTOR_OFFSET 0x500 static irqreturn_t ras_epow_interrupt(int irq, void *dev_id); static irqreturn_t ras_error_interrupt(int irq, void *dev_id); @@ -121,7 +120,7 @@ static irqreturn_t ras_epow_interrupt(int irq, void *dev_id) spin_lock(&ras_log_buf_lock); status = rtas_call(ras_check_exception_token, 6, 1, NULL, - RAS_VECTOR_OFFSET, + RTAS_VECTOR_EXTERNAL_INTERRUPT, irq_map[irq].hwirq, RTAS_EPOW_WARNING | RTAS_POWERMGM_EVENTS, critical, __pa(&ras_log_buf), @@ -156,7 +155,7 @@ static irqreturn_t ras_error_interrupt(int irq, void *dev_id) spin_lock(&ras_log_buf_lock); status = rtas_call(ras_check_exception_token, 6, 1, NULL, - RAS_VECTOR_OFFSET, + RTAS_VECTOR_EXTERNAL_INTERRUPT, irq_map[irq].hwirq, RTAS_INTERNAL_ERROR, 1 /*Time Critical */, __pa(&ras_log_buf), -- cgit v1.2.3-18-g5258 From 68581e9350506dcf0160c3a29dcd21e5a848cda7 Mon Sep 17 00:00:00 2001 From: Mark Nelson Date: Wed, 26 May 2010 20:56:04 +0000 Subject: powerpc/pseries: Add WARN_ON() to request_event_sources_irqs() on irq allocation/request failure At the moment if request_event_sources_irqs() can't allocate or request the interrupt, it just does a KERN_ERR printk. This may be fine for the existing RAS code where if we miss an EPOW event it just means that the event won't be logged and if we miss one of the RAS errors then we could miss an event that we perhaps should take action on. But, for the upcoming IO events code that will use event-sources if we can't allocate or request the interrupt it means we'd potentially miss an interrupt from the device. So, let's add a WARN_ON() in this error case so that we're a bit more vocal when something's amiss. While we're at it, also use pr_err() to neaten the code up a bit. Signed-off-by: Mark Nelson Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/event_sources.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/event_sources.c b/arch/powerpc/platforms/pseries/event_sources.c index e889c9d9586..2605c310166 100644 --- a/arch/powerpc/platforms/pseries/event_sources.c +++ b/arch/powerpc/platforms/pseries/event_sources.c @@ -41,9 +41,12 @@ void request_event_sources_irqs(struct device_node *np, if (count > 15) break; virqs[count] = irq_create_mapping(NULL, *(opicprop++)); - if (virqs[count] == NO_IRQ) - printk(KERN_ERR "Unable to allocate interrupt " - "number for %s\n", np->full_name); + if (virqs[count] == NO_IRQ) { + pr_err("event-sources: Unable to allocate " + "interrupt number for %s\n", + np->full_name); + WARN_ON(1); + } else count++; @@ -59,9 +62,12 @@ void request_event_sources_irqs(struct device_node *np, virqs[count] = irq_create_of_mapping(oirq.controller, oirq.specifier, oirq.size); - if (virqs[count] == NO_IRQ) - printk(KERN_ERR "Unable to allocate interrupt " - "number for %s\n", np->full_name); + if (virqs[count] == NO_IRQ) { + pr_err("event-sources: Unable to allocate " + "interrupt number for %s\n", + np->full_name); + WARN_ON(1); + } else count++; } @@ -70,8 +76,9 @@ void request_event_sources_irqs(struct device_node *np, /* Now request them */ for (i = 0; i < count; i++) { if (request_irq(virqs[i], handler, 0, name, NULL)) { - printk(KERN_ERR "Unable to request interrupt %d for " - "%s\n", virqs[i], np->full_name); + pr_err("event-sources: Unable to request interrupt " + "%d for %s\n", virqs[i], np->full_name); + WARN_ON(1); return; } } -- cgit v1.2.3-18-g5258 From 540c6c392f01887dcc96bef0a41e63e6c1334f01 Mon Sep 17 00:00:00 2001 From: Martyn Welch Date: Mon, 24 May 2010 22:09:16 +0000 Subject: powerpc: Add i8042 keyboard and mouse irq parsing Currently the irqs for the i8042, which historically provides keyboard and mouse (aux) support, is hardwired in the driver rather than parsing the dts. This patch modifies the powerpc legacy IO code to attempt to parse the device tree for this information, failing back to the hardcoded values if it fails. Signed-off-by: Martyn Welch Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/setup-common.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 5e4d852f640..8b6ada66060 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -94,6 +94,10 @@ struct screen_info screen_info = { .orig_video_points = 16 }; +/* Variables required to store legacy IO irq routing */ +int of_i8042_kbd_irq; +int of_i8042_aux_irq; + #ifdef __DO_IRQ_CANON /* XXX should go elsewhere eventually */ int ppc_do_canonicalize_irqs; @@ -575,6 +579,15 @@ int check_legacy_ioport(unsigned long base_port) np = of_find_compatible_node(NULL, NULL, "pnpPNP,f03"); if (np) { parent = of_get_parent(np); + + of_i8042_kbd_irq = irq_of_parse_and_map(parent, 0); + if (!of_i8042_kbd_irq) + of_i8042_kbd_irq = 1; + + of_i8042_aux_irq = irq_of_parse_and_map(parent, 1); + if (!of_i8042_aux_irq) + of_i8042_aux_irq = 12; + of_node_put(np); np = parent; break; -- cgit v1.2.3-18-g5258 From a591f6b56d6fbd7d1951e352fe5b0acf6b91e497 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Tue, 18 May 2010 07:56:03 +0000 Subject: powerpc: Remove all rcu head initializations Remove all rcu head inits. We don't care about the RCU head state before passing it to call_rcu() anyway. Only leave the "on_stack" variants so debugobjects can keep track of objects on stack. Signed-off-by: Mathieu Desnoyers Signed-off-by: Paul E. McKenney Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/pgtable.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c index ebc2f38eb38..2c7e801ab20 100644 --- a/arch/powerpc/mm/pgtable.c +++ b/arch/powerpc/mm/pgtable.c @@ -92,7 +92,6 @@ static void pte_free_rcu_callback(struct rcu_head *head) static void pte_free_submit(struct pte_freelist_batch *batch) { - INIT_RCU_HEAD(&batch->rcu); call_rcu(&batch->rcu, pte_free_rcu_callback); } -- cgit v1.2.3-18-g5258 From 41eab6f88f24124df89e38067b3766b7bef06ddb Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Sun, 16 May 2010 20:22:31 +0000 Subject: powerpc/numa: Use form 1 affinity to setup node distance Form 1 affinity allows multiple entries in ibm,associativity-reference-points which represent affinity domains in decreasing order of importance. The Linux concept of a node is always the first entry, but using the other values as an input to node_distance() allows the memory allocator to make better decisions on which node to go first when local memory has been exhausted. We keep things simple and create an array indexed by NUMA node, capped at 4 entries. Each time we lookup an associativity property we initialise the array which is overkill, but since we should only hit this path during boot it didn't seem worth adding a per node valid bit. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/topology.h | 3 + arch/powerpc/mm/numa.c | 122 ++++++++++++++++++++++++++---------- 2 files changed, 92 insertions(+), 33 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h index 32adf728072..3033c1b3074 100644 --- a/arch/powerpc/include/asm/topology.h +++ b/arch/powerpc/include/asm/topology.h @@ -87,6 +87,9 @@ static inline int pcibus_to_node(struct pci_bus *bus) .balance_interval = 1, \ } +extern int __node_distance(int, int); +#define node_distance(a, b) __node_distance(a, b) + extern void __init dump_numa_cpu_topology(void); extern int sysfs_add_device_to_node(struct sys_device *dev, int nid); diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 80d110635d2..f78f19e0a2a 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -42,6 +42,12 @@ EXPORT_SYMBOL(node_data); static int min_common_depth; static int n_mem_addr_cells, n_mem_size_cells; +static int form1_affinity; + +#define MAX_DISTANCE_REF_POINTS 4 +static int distance_ref_points_depth; +static const unsigned int *distance_ref_points; +static int distance_lookup_table[MAX_NUMNODES][MAX_DISTANCE_REF_POINTS]; /* * Allocate node_to_cpumask_map based on number of available nodes @@ -204,6 +210,39 @@ static const u32 *of_get_usable_memory(struct device_node *memory) return prop; } +int __node_distance(int a, int b) +{ + int i; + int distance = LOCAL_DISTANCE; + + if (!form1_affinity) + return distance; + + for (i = 0; i < distance_ref_points_depth; i++) { + if (distance_lookup_table[a][i] == distance_lookup_table[b][i]) + break; + + /* Double the distance for each NUMA level */ + distance *= 2; + } + + return distance; +} + +static void initialize_distance_lookup_table(int nid, + const unsigned int *associativity) +{ + int i; + + if (!form1_affinity) + return; + + for (i = 0; i < distance_ref_points_depth; i++) { + distance_lookup_table[nid][i] = + associativity[distance_ref_points[i]]; + } +} + /* Returns nid in the range [0..MAX_NUMNODES-1], or -1 if no useful numa * info is found. */ @@ -225,6 +264,10 @@ static int of_node_to_nid_single(struct device_node *device) /* POWER4 LPAR uses 0xffff as invalid node */ if (nid == 0xffff || nid >= MAX_NUMNODES) nid = -1; + + if (nid > 0 && tmp[0] >= distance_ref_points_depth) + initialize_distance_lookup_table(nid, tmp); + out: return nid; } @@ -251,26 +294,10 @@ int of_node_to_nid(struct device_node *device) } EXPORT_SYMBOL_GPL(of_node_to_nid); -/* - * In theory, the "ibm,associativity" property may contain multiple - * associativity lists because a resource may be multiply connected - * into the machine. This resource then has different associativity - * characteristics relative to its multiple connections. We ignore - * this for now. We also assume that all cpu and memory sets have - * their distances represented at a common level. This won't be - * true for hierarchical NUMA. - * - * In any case the ibm,associativity-reference-points should give - * the correct depth for a normal NUMA system. - * - * - Dave Hansen - */ static int __init find_min_common_depth(void) { - int depth, index; - const unsigned int *ref_points; + int depth; struct device_node *rtas_root; - unsigned int len; struct device_node *chosen; const char *vec5; @@ -280,18 +307,28 @@ static int __init find_min_common_depth(void) return -1; /* - * this property is 2 32-bit integers, each representing a level of - * depth in the associativity nodes. The first is for an SMP - * configuration (should be all 0's) and the second is for a normal - * NUMA configuration. + * This property is a set of 32-bit integers, each representing + * an index into the ibm,associativity nodes. + * + * With form 0 affinity the first integer is for an SMP configuration + * (should be all 0's) and the second is for a normal NUMA + * configuration. We have only one level of NUMA. + * + * With form 1 affinity the first integer is the most significant + * NUMA boundary and the following are progressively less significant + * boundaries. There can be more than one level of NUMA. */ - index = 1; - ref_points = of_get_property(rtas_root, - "ibm,associativity-reference-points", &len); + distance_ref_points = of_get_property(rtas_root, + "ibm,associativity-reference-points", + &distance_ref_points_depth); + + if (!distance_ref_points) { + dbg("NUMA: ibm,associativity-reference-points not found.\n"); + goto err; + } + + distance_ref_points_depth /= sizeof(int); - /* - * For form 1 affinity information we want the first field - */ #define VEC5_AFFINITY_BYTE 5 #define VEC5_AFFINITY 0x80 chosen = of_find_node_by_path("/chosen"); @@ -299,19 +336,38 @@ static int __init find_min_common_depth(void) vec5 = of_get_property(chosen, "ibm,architecture-vec-5", NULL); if (vec5 && (vec5[VEC5_AFFINITY_BYTE] & VEC5_AFFINITY)) { dbg("Using form 1 affinity\n"); - index = 0; + form1_affinity = 1; } } - if ((len >= 2 * sizeof(unsigned int)) && ref_points) { - depth = ref_points[index]; + if (form1_affinity) { + depth = distance_ref_points[0]; } else { - dbg("NUMA: ibm,associativity-reference-points not found.\n"); - depth = -1; + if (distance_ref_points_depth < 2) { + printk(KERN_WARNING "NUMA: " + "short ibm,associativity-reference-points\n"); + goto err; + } + + depth = distance_ref_points[1]; } - of_node_put(rtas_root); + /* + * Warn and cap if the hardware supports more than + * MAX_DISTANCE_REF_POINTS domains. + */ + if (distance_ref_points_depth > MAX_DISTANCE_REF_POINTS) { + printk(KERN_WARNING "NUMA: distance array capped at " + "%d entries\n", MAX_DISTANCE_REF_POINTS); + distance_ref_points_depth = MAX_DISTANCE_REF_POINTS; + } + + of_node_put(rtas_root); return depth; + +err: + of_node_put(rtas_root); + return -1; } static void __init get_n_mem_cells(int *n_addr_cells, int *n_size_cells) -- cgit v1.2.3-18-g5258 From 307a54cc80ddc7e5d87c4862dd12f43a01355187 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Fri, 14 May 2010 09:31:26 +0000 Subject: powerpc/iseries: Use kstrdup Use kstrdup when the goal of an allocation is copy a string into the allocated region. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // @@ expression from,to; expression flag,E1,E2; statement S; @@ - to = kmalloc(strlen(from) + 1,flag); + to = kstrdup(from, flag); ... when != \(from = E1 \| to = E1 \) if (to==NULL || ...) S ... when != \(from = E2 \| to = E2 \) - strcpy(to, from); // Signed-off-by: Julia Lawall Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/iseries/vio.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/iseries/vio.c b/arch/powerpc/platforms/iseries/vio.c index 00b6730bc48..b6db7cef83b 100644 --- a/arch/powerpc/platforms/iseries/vio.c +++ b/arch/powerpc/platforms/iseries/vio.c @@ -87,12 +87,11 @@ static struct device_node *new_node(const char *path, if (!np) return NULL; - np->full_name = kmalloc(strlen(path) + 1, GFP_KERNEL); + np->full_name = kstrdup(path, GFP_KERNEL); if (!np->full_name) { kfree(np); return NULL; } - strcpy(np->full_name, path); of_node_set_flag(np, OF_DYNAMIC); kref_init(&np->kref); np->parent = of_node_get(parent); -- cgit v1.2.3-18-g5258 From 74052173177b7f969d9cc0c8f136093e1d447a01 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Fri, 14 May 2010 09:30:13 +0000 Subject: powerpc/pseries: Use kstrdup Use kstrdup when the goal of an allocation is copy a string into the allocated region. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // @@ expression from,to; expression flag,E1,E2; statement S; @@ - to = kmalloc(strlen(from) + 1,flag); + to = kstrdup(from, flag); ... when != \(from = E1 \| to = E1 \) if (to==NULL || ...) S ... when != \(from = E2 \| to = E2 \) - strcpy(to, from); // Signed-off-by: Julia Lawall Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/reconfig.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c index 1a58637bcea..57ddbb43b33 100644 --- a/arch/powerpc/platforms/pseries/reconfig.c +++ b/arch/powerpc/platforms/pseries/reconfig.c @@ -118,12 +118,10 @@ static int pSeries_reconfig_add_node(const char *path, struct property *proplist if (!np) goto out_err; - np->full_name = kmalloc(strlen(path) + 1, GFP_KERNEL); + np->full_name = kstrdup(path, GFP_KERNEL); if (!np->full_name) goto out_err; - strcpy(np->full_name, path); - np->properties = proplist; of_node_set_flag(np, OF_DYNAMIC); kref_init(&np->kref); -- cgit v1.2.3-18-g5258 From cccd23428347251713b643d4bc5edb610308fd49 Mon Sep 17 00:00:00 2001 From: Christoph Egger Date: Thu, 10 Jun 2010 02:23:11 +0000 Subject: powerpc: Removing dead CONFIG_SMP_750 CONFIG_SMP_750 doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by: Christoph Egger Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/tlb_hash32.c | 15 --------------- 1 file changed, 15 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/tlb_hash32.c b/arch/powerpc/mm/tlb_hash32.c index 8aaa8b7eb32..690566b66e8 100644 --- a/arch/powerpc/mm/tlb_hash32.c +++ b/arch/powerpc/mm/tlb_hash32.c @@ -89,17 +89,6 @@ void tlb_flush(struct mmu_gather *tlb) * -- Cort */ -/* - * 750 SMP is a Bad Idea because the 750 doesn't broadcast all - * the cache operations on the bus. Hence we need to use an IPI - * to get the other CPU(s) to invalidate their TLBs. - */ -#ifdef CONFIG_SMP_750 -#define FINISH_FLUSH smp_send_tlb_invalidate(0) -#else -#define FINISH_FLUSH do { } while (0) -#endif - static void flush_range(struct mm_struct *mm, unsigned long start, unsigned long end) { @@ -138,7 +127,6 @@ static void flush_range(struct mm_struct *mm, unsigned long start, void flush_tlb_kernel_range(unsigned long start, unsigned long end) { flush_range(&init_mm, start, end); - FINISH_FLUSH; } EXPORT_SYMBOL(flush_tlb_kernel_range); @@ -162,7 +150,6 @@ void flush_tlb_mm(struct mm_struct *mm) */ for (mp = mm->mmap; mp != NULL; mp = mp->vm_next) flush_range(mp->vm_mm, mp->vm_start, mp->vm_end); - FINISH_FLUSH; } EXPORT_SYMBOL(flush_tlb_mm); @@ -179,7 +166,6 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr) pmd = pmd_offset(pud_offset(pgd_offset(mm, vmaddr), vmaddr), vmaddr); if (!pmd_none(*pmd)) flush_hash_pages(mm->context.id, vmaddr, pmd_val(*pmd), 1); - FINISH_FLUSH; } EXPORT_SYMBOL(flush_tlb_page); @@ -192,6 +178,5 @@ void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { flush_range(vma->vm_mm, start, end); - FINISH_FLUSH; } EXPORT_SYMBOL(flush_tlb_range); -- cgit v1.2.3-18-g5258 From 0866eb99cc4d5951cb0ed6ddfa92d5a3d55216ae Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 9 Jul 2010 15:21:41 +1000 Subject: powerpc/book3e: mtmsr should not be mtmsrd on book3e 64-bit Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/reg.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index d62fdf4e504..d8be016d2ed 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -890,7 +890,7 @@ #ifndef __ASSEMBLY__ #define mfmsr() ({unsigned long rval; \ asm volatile("mfmsr %0" : "=r" (rval)); rval;}) -#ifdef CONFIG_PPC64 +#ifdef CONFIG_PPC_BOOK3S_64 #define __mtmsrd(v, l) asm volatile("mtmsrd %0," __stringify(l) \ : : "r" (v) : "memory") #define mtmsrd(v) __mtmsrd((v), 0) -- cgit v1.2.3-18-g5258 From a2e198116f97bb1cd5b37ff33a8cfdfb4010cf5b Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 9 Jul 2010 15:24:47 +1000 Subject: powerpc/book3e: Hack to get gdb moving along on Book3E 64-bit Our handling of debug interrupts on Book3E 64-bit is not quite the way it should be just yet. This is a workaround to let gdb work at least for now. We ensure that when context switching, we set the appropriate DBCR0 value for the new task. We also make sure that we turn off MSR[DE] within the kernel, and set it as part of the bits that get set when going back to userspace. In the long run, we will probably set the userspace DBCR0 on the exception exit code path and ensure we have some proper kernel value to set on the way into the kernel, a bit like ppc32 does, but that will take more work. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/reg_booke.h | 4 ++-- arch/powerpc/kernel/process.c | 22 ++++++++++++++++++++++ 2 files changed, 24 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h index 2360317179a..66dc6f0d3ad 100644 --- a/arch/powerpc/include/asm/reg_booke.h +++ b/arch/powerpc/include/asm/reg_booke.h @@ -29,8 +29,8 @@ #if defined(CONFIG_PPC_BOOK3E_64) #define MSR_ MSR_ME | MSR_CE #define MSR_KERNEL MSR_ | MSR_CM -#define MSR_USER32 MSR_ | MSR_PR | MSR_EE -#define MSR_USER64 MSR_USER32 | MSR_CM +#define MSR_USER32 MSR_ | MSR_PR | MSR_EE | MSR_DE +#define MSR_USER64 MSR_USER32 | MSR_CM | MSR_DE #elif defined (CONFIG_40x) #define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE) #define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE) diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 1e78453645b..551f6713ff4 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -477,6 +477,28 @@ struct task_struct *__switch_to(struct task_struct *prev, new_thread = &new->thread; old_thread = ¤t->thread; +#if defined(CONFIG_PPC_BOOK3E_64) + /* XXX Current Book3E code doesn't deal with kernel side DBCR0, + * we always hold the user values, so we set it now. + * + * However, we ensure the kernel MSR:DE is appropriately cleared too + * to avoid spurrious single step exceptions in the kernel. + * + * This will have to change to merge with the ppc32 code at some point, + * but I don't like much what ppc32 is doing today so there's some + * thinking needed there + */ + if ((new_thread->dbcr0 | old_thread->dbcr0) & DBCR0_IDM) { + u32 dbcr0; + + mtmsr(mfmsr() & ~MSR_DE); + isync(); + dbcr0 = mfspr(SPRN_DBCR0); + dbcr0 = (dbcr0 & DBCR0_EDM) | new_thread->dbcr0; + mtspr(SPRN_DBCR0, dbcr0); + } +#endif /* CONFIG_PPC64_BOOK3E */ + #ifdef CONFIG_PPC64 /* * Collect processor utilization data per process -- cgit v1.2.3-18-g5258 From e3145b387a02d4bf8b8033b1354d413fc0864494 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 9 Jul 2010 15:25:18 +1000 Subject: powerpc/book3e: Move doorbell_exception from traps.c to dbell.c ... where it belongs Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/dbell.c | 22 +++++++++++++++++++++- arch/powerpc/kernel/traps.c | 21 --------------------- 2 files changed, 21 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/dbell.c b/arch/powerpc/kernel/dbell.c index 1493734cd87..e3a717704fd 100644 --- a/arch/powerpc/kernel/dbell.c +++ b/arch/powerpc/kernel/dbell.c @@ -41,4 +41,24 @@ void smp_dbell_message_pass(int target, int msg) ppc_msgsnd(PPC_DBELL, PPC_DBELL_MSG_BRDCAST, 0); } } -#endif + +void doorbell_exception(struct pt_regs *regs) +{ + int cpu = smp_processor_id(); + int msg; + + if (num_online_cpus() < 2) + return; + + for (msg = 0; msg < 4; msg++) + if (test_and_clear_bit(msg, &dbell_smp_message[cpu])) + smp_message_recv(msg); +} + +#else /* CONFIG_SMP */ +void doorbell_exception(struct pt_regs *regs) +{ + printk(KERN_WARNING "Received doorbell on non-smp system\n"); +} +#endif /* CONFIG_SMP */ + diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index e5fe5a8522a..a45a63c3a0c 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -55,9 +55,6 @@ #endif #include #include -#ifdef CONFIG_FSL_BOOKE -#include -#endif #if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC) int (*__debugger)(struct pt_regs *regs) __read_mostly; @@ -1342,24 +1339,6 @@ void vsx_assist_exception(struct pt_regs *regs) #endif /* CONFIG_VSX */ #ifdef CONFIG_FSL_BOOKE - -void doorbell_exception(struct pt_regs *regs) -{ -#ifdef CONFIG_SMP - int cpu = smp_processor_id(); - int msg; - - if (num_online_cpus() < 2) - return; - - for (msg = 0; msg < 4; msg++) - if (test_and_clear_bit(msg, &dbell_smp_message[cpu])) - smp_message_recv(msg); -#else - printk(KERN_WARNING "Received doorbell on non-smp system\n"); -#endif -} - void CacheLockingException(struct pt_regs *regs, unsigned long address, unsigned long error_code) { -- cgit v1.2.3-18-g5258 From b9f1cd71dbf21a91fb7e2336a1d1ff18b97771e5 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 9 Jul 2010 15:29:53 +1000 Subject: powerpc/book3e: More doorbell cleanups. Sample the PIR register The doorbells use the content of the PIR register to match messages from other CPUs. This may or may not be the same as our linux CPU number, so using that as the "target" is no right. Instead, we sample the PIR register at boot on every processor and use that value subsequently when sending IPIs. We also use a per-cpu message mask rather than a global array which should limit cache line contention. Note: We could use the CPU number in the device-tree instead of the PIR register, as they are supposed to be equivalent. This might prove useful if doorbells are to be used to kick CPUs out of FW at boot time, thus before we can sample the PIR. This is however not the case now and using the PIR just works. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/dbell.h | 7 +++--- arch/powerpc/kernel/dbell.c | 47 ++++++++++++++++++++++++++++----------- arch/powerpc/platforms/85xx/smp.c | 4 +++- 3 files changed, 40 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/dbell.h b/arch/powerpc/include/asm/dbell.h index 501189a543d..ced7e487ca2 100644 --- a/arch/powerpc/include/asm/dbell.h +++ b/arch/powerpc/include/asm/dbell.h @@ -27,10 +27,9 @@ enum ppc_dbell { PPC_G_DBELL_MC = 4, /* guest mcheck doorbell */ }; -#ifdef CONFIG_SMP -extern unsigned long dbell_smp_message[NR_CPUS]; -extern void smp_dbell_message_pass(int target, int msg); -#endif +extern void doorbell_message_pass(int target, int msg); +extern void doorbell_exception(struct pt_regs *regs); +extern void doorbell_setup_this_cpu(void); static inline void ppc_msgsnd(enum ppc_dbell type, u32 flags, u32 tag) { diff --git a/arch/powerpc/kernel/dbell.c b/arch/powerpc/kernel/dbell.c index e3a717704fd..1c7a94580c3 100644 --- a/arch/powerpc/kernel/dbell.c +++ b/arch/powerpc/kernel/dbell.c @@ -13,45 +13,66 @@ #include #include #include +#include #include #ifdef CONFIG_SMP -unsigned long dbell_smp_message[NR_CPUS]; +struct doorbell_cpu_info { + unsigned long messages; /* current messages bits */ + unsigned int tag; /* tag value */ +}; -void smp_dbell_message_pass(int target, int msg) +static DEFINE_PER_CPU(struct doorbell_cpu_info, doorbell_cpu_info); + +void doorbell_setup_this_cpu(void) +{ + struct doorbell_cpu_info *info = &__get_cpu_var(doorbell_cpu_info); + + info->messages = 0; + info->tag = mfspr(SPRN_PIR) & 0x3fff; +} + +void doorbell_message_pass(int target, int msg) { + struct doorbell_cpu_info *info; int i; - if(target < NR_CPUS) { - set_bit(msg, &dbell_smp_message[target]); - ppc_msgsnd(PPC_DBELL, 0, target); + if (target < NR_CPUS) { + info = &per_cpu(doorbell_cpu_info, target); + set_bit(msg, &info->messages); + ppc_msgsnd(PPC_DBELL, 0, info->tag); } - else if(target == MSG_ALL_BUT_SELF) { + else if (target == MSG_ALL_BUT_SELF) { for_each_online_cpu(i) { if (i == smp_processor_id()) continue; - set_bit(msg, &dbell_smp_message[i]); - ppc_msgsnd(PPC_DBELL, 0, i); + info = &per_cpu(doorbell_cpu_info, i); + set_bit(msg, &info->messages); + ppc_msgsnd(PPC_DBELL, 0, info->tag); } } else { /* target == MSG_ALL */ - for_each_online_cpu(i) - set_bit(msg, &dbell_smp_message[i]); + for_each_online_cpu(i) { + info = &per_cpu(doorbell_cpu_info, i); + set_bit(msg, &info->messages); + } ppc_msgsnd(PPC_DBELL, PPC_DBELL_MSG_BRDCAST, 0); } } void doorbell_exception(struct pt_regs *regs) { - int cpu = smp_processor_id(); + struct doorbell_cpu_info *info = &__get_cpu_var(doorbell_cpu_info); int msg; - if (num_online_cpus() < 2) + /* Warning: regs can be NULL when called from irq enable */ + + if (!info->messages || (num_online_cpus() < 2)) return; for (msg = 0; msg < 4; msg++) - if (test_and_clear_bit(msg, &dbell_smp_message[cpu])) + if (test_and_clear_bit(msg, &info->messages)) smp_message_recv(msg); } diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c index a15f582300d..4c3cde911c7 100644 --- a/arch/powerpc/platforms/85xx/smp.c +++ b/arch/powerpc/platforms/85xx/smp.c @@ -99,6 +99,8 @@ static void __init smp_85xx_setup_cpu(int cpu_nr) { mpic_setup_this_cpu(); + if (cpu_has_feature(CPU_FTR_DBELL)) + doorbell_setup_this_cpu(); } struct smp_ops_t smp_85xx_ops = { @@ -117,7 +119,7 @@ void __init mpc85xx_smp_init(void) } if (cpu_has_feature(CPU_FTR_DBELL)) - smp_85xx_ops.message_pass = smp_dbell_message_pass; + smp_85xx_ops.message_pass = doorbell_message_pass; BUG_ON(!smp_85xx_ops.message_pass); -- cgit v1.2.3-18-g5258 From e8775d4aa17d70d123814e68a6a51bbea50e5c16 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 9 Jul 2010 15:30:22 +1000 Subject: powerpc/book3e: Don't re-trigger decrementer on lazy irq restore The decrementer on BookE acts as a level interrupt and doesn't need to be re-triggered when going negative. It doesn't go negative anyways (unless programmed to auto-reload with a negative value) as it stops when reaching 0. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/irq.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 77be3d058a6..fa6f3852580 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -159,8 +159,17 @@ notrace void raw_local_irq_restore(unsigned long en) * use local_paca instead of get_paca() to avoid preemption checking. */ local_paca->hard_enabled = en; + +#ifndef CONFIG_BOOKE + /* On server, re-trigger the decrementer if it went negative since + * some processors only trigger on edge transitions of the sign bit. + * + * BookE has a level sensitive decrementer (latches in TSR) so we + * don't need that + */ if ((int)mfspr(SPRN_DEC) < 0) mtspr(SPRN_DEC, 1); +#endif /* CONFIG_BOOKE */ /* * Force the delivery of pending soft-disabled interrupts on PS3. -- cgit v1.2.3-18-g5258 From 89c81797d4a0779a957f4ea1f0c676cda203615b Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 9 Jul 2010 15:31:28 +1000 Subject: powerpc/book3e: Hookup doorbells exceptions on 64-bit Book3E Note that critical doorbells are an unimplemented stub just like other critical or machine check handlers, since we haven't done support for "levelled" exceptions yet. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/Makefile | 1 + arch/powerpc/kernel/exceptions-64e.S | 21 +++++++++++++++++---- arch/powerpc/kernel/irq.c | 7 +++++++ 3 files changed, 25 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 01006040f59..8a33318fa46 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -68,6 +68,7 @@ obj64-$(CONFIG_HIBERNATION) += swsusp_asm64.o obj-$(CONFIG_MODULES) += module.o module_$(CONFIG_WORD_SIZE).o obj-$(CONFIG_44x) += cpu_setup_44x.o obj-$(CONFIG_FSL_BOOKE) += cpu_setup_fsl_booke.o dbell.o +obj-$(CONFIG_PPC_BOOK3E_64) += dbell.o extra-y := head_$(CONFIG_WORD_SIZE).o extra-$(CONFIG_PPC_BOOK3E_32) := head_new_booke.o diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S index 24dcc0ecf24..a42637c3a72 100644 --- a/arch/powerpc/kernel/exceptions-64e.S +++ b/arch/powerpc/kernel/exceptions-64e.S @@ -246,11 +246,9 @@ interrupt_base_book3e: /* fake trap */ EXCEPTION_STUB(0x1a0, watchdog) /* 0x09f0 */ EXCEPTION_STUB(0x1c0, data_tlb_miss) EXCEPTION_STUB(0x1e0, instruction_tlb_miss) + EXCEPTION_STUB(0x280, doorbell) + EXCEPTION_STUB(0x2a0, doorbell_crit) -#if 0 - EXCEPTION_STUB(0x280, processor_doorbell) - EXCEPTION_STUB(0x220, processor_doorbell_crit) -#endif .globl interrupt_end_book3e interrupt_end_book3e: @@ -428,6 +426,19 @@ interrupt_end_book3e: kernel_dbg_exc: b . /* NYI */ +/* Doorbell interrupt */ + MASKABLE_EXCEPTION(0x2070, doorbell, .doorbell_exception, ACK_NONE) + +/* Doorbell critical Interrupt */ + START_EXCEPTION(doorbell_crit); + CRIT_EXCEPTION_PROLOG(0x2080, PROLOG_ADDITION_NONE) +// EXCEPTION_COMMON(0x2080, PACA_EXCRIT, INTS_DISABLE_ALL) +// bl special_reg_save_crit +// addi r3,r1,STACK_FRAME_OVERHEAD +// bl .doorbell_critical_exception +// b ret_from_crit_except + b . + /* * An interrupt came in while soft-disabled; clear EE in SRR1, @@ -563,6 +574,8 @@ BAD_STACK_TRAMPOLINE(0xd00) BAD_STACK_TRAMPOLINE(0xe00) BAD_STACK_TRAMPOLINE(0xf00) BAD_STACK_TRAMPOLINE(0xf20) +BAD_STACK_TRAMPOLINE(0x2070) +BAD_STACK_TRAMPOLINE(0x2080) .globl bad_stack_book3e bad_stack_book3e: diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index fa6f3852580..2f6dc7faf6d 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -64,6 +64,8 @@ #include #include #include +#include + #ifdef CONFIG_PPC64 #include #include @@ -153,6 +155,11 @@ notrace void raw_local_irq_restore(unsigned long en) if (get_hard_enabled()) return; +#if defined(CONFIG_BOOKE) && defined(CONFIG_SMP) + /* Check for pending doorbell interrupts on SMP */ + doorbell_exception(NULL); +#endif + /* * Need to hard-enable interrupts here. Since currently disabled, * no need to take further asm precautions against preemption; but -- cgit v1.2.3-18-g5258 From 0e37d25950f4fd5a7d74723e6ce608aaa972d24c Mon Sep 17 00:00:00 2001 From: David Gibson Date: Fri, 9 Jul 2010 15:32:30 +1000 Subject: powerpc/book3e: Use set_irq_regs() in the msgsnd/msgrcv IPI path include/asm-generic/irq_regs.h declares per-cpu irq_regs variables and get_irq_regs() and set_irq_regs() helper functions to maintain them. These can be used to access the proper pt_regs structure related to the current interrupt entry (if any). In the powerpc arch code, this is used to maintain irq regs on decrementer and external interrupt exceptions. However, for the doorbell exceptions used by the msgsnd/msgrcv IPI mechanism of newer BookE CPUs, the irq_regs are not kept up to date. In particular this means that xmon will not work properly on SMP, because the secondary xmon instances started by IPI will blow up when they cannot retrieve the irq regs. This patch fixes the problem by adding calls to maintain the irq regs across doorbell exceptions. Signed-off-by: David Gibson Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/dbell.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/dbell.c b/arch/powerpc/kernel/dbell.c index 1c7a94580c3..f7b518894c8 100644 --- a/arch/powerpc/kernel/dbell.c +++ b/arch/powerpc/kernel/dbell.c @@ -16,6 +16,7 @@ #include #include +#include #ifdef CONFIG_SMP struct doorbell_cpu_info { @@ -63,17 +64,21 @@ void doorbell_message_pass(int target, int msg) void doorbell_exception(struct pt_regs *regs) { + struct pt_regs *old_regs = set_irq_regs(regs); struct doorbell_cpu_info *info = &__get_cpu_var(doorbell_cpu_info); int msg; /* Warning: regs can be NULL when called from irq enable */ if (!info->messages || (num_online_cpus() < 2)) - return; + goto out; for (msg = 0; msg < 4; msg++) if (test_and_clear_bit(msg, &info->messages)) smp_message_recv(msg); + +out: + set_irq_regs(old_regs); } #else /* CONFIG_SMP */ -- cgit v1.2.3-18-g5258 From 850f22d5688941ea51628f3f8f8dcf3baff409ff Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 9 Jul 2010 15:34:00 +1000 Subject: powerpc/book3e: Resend doorbell exceptions to ourself If we are soft disabled and receive a doorbell exception we don't process it immediately. This means we need to check on the way out of irq restore if there are any doorbell exceptions to process. The problem is at that point we don't know what our regs are, and that in turn makes xmon unhappy. To workaround the problem, instead of checking for and processing doorbells, we check for any doorbells and if there were any we send ourselves another. Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/dbell.h | 1 + arch/powerpc/kernel/dbell.c | 10 ++++++++++ arch/powerpc/kernel/irq.c | 4 ++-- 3 files changed, 13 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/dbell.h b/arch/powerpc/include/asm/dbell.h index ced7e487ca2..0893ab9343a 100644 --- a/arch/powerpc/include/asm/dbell.h +++ b/arch/powerpc/include/asm/dbell.h @@ -29,6 +29,7 @@ enum ppc_dbell { extern void doorbell_message_pass(int target, int msg); extern void doorbell_exception(struct pt_regs *regs); +extern void doorbell_check_self(void); extern void doorbell_setup_this_cpu(void); static inline void ppc_msgsnd(enum ppc_dbell type, u32 flags, u32 tag) diff --git a/arch/powerpc/kernel/dbell.c b/arch/powerpc/kernel/dbell.c index f7b518894c8..3307a52d797 100644 --- a/arch/powerpc/kernel/dbell.c +++ b/arch/powerpc/kernel/dbell.c @@ -81,6 +81,16 @@ out: set_irq_regs(old_regs); } +void doorbell_check_self(void) +{ + struct doorbell_cpu_info *info = &__get_cpu_var(doorbell_cpu_info); + + if (!info->messages) + return; + + ppc_msgsnd(PPC_DBELL, 0, info->tag); +} + #else /* CONFIG_SMP */ void doorbell_exception(struct pt_regs *regs) { diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 2f6dc7faf6d..8f96d319890 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -156,8 +156,8 @@ notrace void raw_local_irq_restore(unsigned long en) return; #if defined(CONFIG_BOOKE) && defined(CONFIG_SMP) - /* Check for pending doorbell interrupts on SMP */ - doorbell_exception(NULL); + /* Check for pending doorbell interrupts and resend to ourself */ + doorbell_check_self(); #endif /* -- cgit v1.2.3-18-g5258 From 34d97e07cc81ab6f1e63696127cc7a5d2c4fce4b Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 14 Jul 2010 14:12:16 +1000 Subject: powerpc/book3e: Add generic 64-bit idle powersave support We use a similar technique to ppc32: We set a thread local flag to indicate that we are about to enter or have entered the stop state, and have fixup code in the async interrupt entry code that reacts to this flag to make us return to a different location (sets NIP to LINK in our case). Signed-off-by: Benjamin Herrenschmidt -- v2. Fix lockdep bug Re-mask interrupts when coming back from idle --- arch/powerpc/include/asm/machdep.h | 1 + arch/powerpc/kernel/Makefile | 2 +- arch/powerpc/kernel/exceptions-64e.S | 23 ++++++++++ arch/powerpc/kernel/idle_book3e.S | 86 ++++++++++++++++++++++++++++++++++++ 4 files changed, 111 insertions(+), 1 deletion(-) create mode 100644 arch/powerpc/kernel/idle_book3e.S (limited to 'arch') diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h index 2bad6e5855a..adc8e6cdf33 100644 --- a/arch/powerpc/include/asm/machdep.h +++ b/arch/powerpc/include/asm/machdep.h @@ -278,6 +278,7 @@ extern void e500_idle(void); extern void power4_idle(void); extern void power4_cpu_offline_powersave(void); extern void ppc6xx_idle(void); +extern void book3e_idle(void); /* * ppc_md contains a copy of the machine description structure for the diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 8a33318fa46..77d831a1cc3 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -37,7 +37,7 @@ obj-$(CONFIG_PPC64) += setup_64.o sys_ppc32.o \ obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_ppc970.o cpu_setup_pa6t.o obj64-$(CONFIG_RELOCATABLE) += reloc_64.o -obj-$(CONFIG_PPC_BOOK3E_64) += exceptions-64e.o +obj-$(CONFIG_PPC_BOOK3E_64) += exceptions-64e.o idle_book3e.o obj-$(CONFIG_PPC64) += vdso64/ obj-$(CONFIG_ALTIVEC) += vecemu.o obj-$(CONFIG_PPC_970_NAP) += idle_power4.o diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S index a42637c3a72..316465a32a9 100644 --- a/arch/powerpc/kernel/exceptions-64e.S +++ b/arch/powerpc/kernel/exceptions-64e.S @@ -204,11 +204,30 @@ exc_##n##_bad_stack: \ lis r,TSR_FIS@h; \ mtspr SPRN_TSR,r +/* Used by asynchronous interrupt that may happen in the idle loop. + * + * This check if the thread was in the idle loop, and if yes, returns + * to the caller rather than the PC. This is to avoid a race if + * interrupts happen before the wait instruction. + */ +#define CHECK_NAPPING() \ + clrrdi r11,r1,THREAD_SHIFT; \ + ld r10,TI_LOCAL_FLAGS(r11); \ + andi. r9,r10,_TLF_NAPPING; \ + beq+ 1f; \ + ld r8,_LINK(r1); \ + rlwinm r7,r10,0,~_TLF_NAPPING; \ + std r8,_NIP(r1); \ + std r7,TI_LOCAL_FLAGS(r11); \ +1: + + #define MASKABLE_EXCEPTION(trapnum, label, hdlr, ack) \ START_EXCEPTION(label); \ NORMAL_EXCEPTION_PROLOG(trapnum, PROLOG_ADDITION_MASKABLE) \ EXCEPTION_COMMON(trapnum, PACA_EXGEN, INTS_DISABLE_ALL) \ ack(r8); \ + CHECK_NAPPING(); \ addi r3,r1,STACK_FRAME_OVERHEAD; \ bl hdlr; \ b .ret_from_except_lite; @@ -257,6 +276,7 @@ interrupt_end_book3e: CRIT_EXCEPTION_PROLOG(0x100, PROLOG_ADDITION_NONE) // EXCEPTION_COMMON(0x100, PACA_EXCRIT, INTS_DISABLE_ALL) // bl special_reg_save_crit +// CHECK_NAPPING(); // addi r3,r1,STACK_FRAME_OVERHEAD // bl .critical_exception // b ret_from_crit_except @@ -268,6 +288,7 @@ interrupt_end_book3e: // EXCEPTION_COMMON(0x200, PACA_EXMC, INTS_DISABLE_ALL) // bl special_reg_save_mc // addi r3,r1,STACK_FRAME_OVERHEAD +// CHECK_NAPPING(); // bl .machine_check_exception // b ret_from_mc_except b . @@ -338,6 +359,7 @@ interrupt_end_book3e: CRIT_EXCEPTION_PROLOG(0x9f0, PROLOG_ADDITION_NONE) // EXCEPTION_COMMON(0x9f0, PACA_EXCRIT, INTS_DISABLE_ALL) // bl special_reg_save_crit +// CHECK_NAPPING(); // addi r3,r1,STACK_FRAME_OVERHEAD // bl .unknown_exception // b ret_from_crit_except @@ -434,6 +456,7 @@ kernel_dbg_exc: CRIT_EXCEPTION_PROLOG(0x2080, PROLOG_ADDITION_NONE) // EXCEPTION_COMMON(0x2080, PACA_EXCRIT, INTS_DISABLE_ALL) // bl special_reg_save_crit +// CHECK_NAPPING(); // addi r3,r1,STACK_FRAME_OVERHEAD // bl .doorbell_critical_exception // b ret_from_crit_except diff --git a/arch/powerpc/kernel/idle_book3e.S b/arch/powerpc/kernel/idle_book3e.S new file mode 100644 index 00000000000..16c002d6bdf --- /dev/null +++ b/arch/powerpc/kernel/idle_book3e.S @@ -0,0 +1,86 @@ +/* + * Copyright 2010 IBM Corp, Benjamin Herrenschmidt + * + * Generic idle routine for Book3E processors + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include + +/* 64-bit version only for now */ +#ifdef CONFIG_PPC64 + +_GLOBAL(book3e_idle) + /* Save LR for later */ + mflr r0 + std r0,16(r1) + + /* Hard disable interrupts */ + wrteei 0 + + /* Now check if an interrupt came in while we were soft disabled + * since we may otherwise lose it (doorbells etc...). We know + * that since PACAHARDIRQEN will have been cleared in that case. + */ + lbz r3,PACAHARDIRQEN(r13) + cmpwi cr0,r3,0 + beqlr + + /* Now we are going to mark ourselves as soft and hard enables in + * order to be able to take interrupts while asleep. We inform lockdep + * of that. We don't actually turn interrupts on just yet tho. + */ +#ifdef CONFIG_TRACE_IRQFLAGS + stdu r1,-128(r1) + bl .trace_hardirqs_on +#endif + li r0,1 + stb r0,PACASOFTIRQEN(r13) + stb r0,PACAHARDIRQEN(r13) + + /* Interrupts will make use return to LR, so get something we want + * in there + */ + bl 1f + + /* Hard disable interrupts again */ + wrteei 0 + + /* Mark them off again in the PACA as well */ + li r0,0 + stb r0,PACASOFTIRQEN(r13) + stb r0,PACAHARDIRQEN(r13) + + /* Tell lockdep about it */ +#ifdef CONFIG_TRACE_IRQFLAGS + bl .trace_hardirqs_off + addi r1,r1,128 +#endif + ld r0,16(r1) + mtlr r0 + blr + +1: /* Let's set the _TLF_NAPPING flag so interrupts make us return + * to the right spot + */ + clrrdi r11,r1,THREAD_SHIFT + ld r10,TI_LOCAL_FLAGS(r11) + ori r10,r10,_TLF_NAPPING + std r10,TI_LOCAL_FLAGS(r11) + + /* We can now re-enable hard interrupts and go to sleep */ + wrteei 1 +1: PPC_WAIT(0) + b 1b + +#endif /* CONFIG_PPC64 */ -- cgit v1.2.3-18-g5258 From ff82c319e6327b12cd94c5c57754abff243ab3e4 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 8 Jun 2010 10:58:58 +1000 Subject: powerpc/book3e: Fix single step when using HW page tables We patch the TLB miss exception vectors to point to alternate functions when using HW page table on BookE. However, we were patching in a new branch in the first instruction of the exception handler instead of the second one, thus overriding the nop that is in the first instruction. This cause problems when single stepping as we rely on that nop for the single step to stop properly within the exception vector range rather than on the target of the branch. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/exceptions-64e.S | 6 ++++++ arch/powerpc/mm/tlb_nohash.c | 13 +++++++++---- 2 files changed, 15 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S index 316465a32a9..5c43063d250 100644 --- a/arch/powerpc/kernel/exceptions-64e.S +++ b/arch/powerpc/kernel/exceptions-64e.S @@ -191,6 +191,12 @@ exc_##n##_bad_stack: \ sth r1,PACA_TRAP_SAVE(r13); /* store trap */ \ b bad_stack_book3e; /* bad stack error */ +/* WARNING: If you change the layout of this stub, make sure you chcek + * the debug exception handler which handles single stepping + * into exceptions from userspace, and the MM code in + * arch/powerpc/mm/tlb_nohash.c which patches the branch here + * and would need to be updated if that branch is moved + */ #define EXCEPTION_STUB(loc, label) \ . = interrupt_base_book3e + loc; \ nop; /* To make debug interrupts happy */ \ diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c index e81d5d67f83..2ce42bf1f67 100644 --- a/arch/powerpc/mm/tlb_nohash.c +++ b/arch/powerpc/mm/tlb_nohash.c @@ -391,10 +391,15 @@ static void __early_init_mmu(int boot_cpu) /* Check if HW loader is supported */ if ((tlb0cfg & TLBnCFG_IND) && (tlb0cfg & TLBnCFG_PT)) { - patch_branch(ibase + (0x1c0 / 4), - (unsigned long)&exc_data_tlb_miss_htw_book3e, 0); - patch_branch(ibase + (0x1e0 / 4), - (unsigned long)&exc_instruction_tlb_miss_htw_book3e, 0); + /* Our exceptions vectors start with a NOP and -then- a branch + * to deal with single stepping from userspace which stops on + * the second instruction. Thus we need to patch the second + * instruction of the exception, not the first one + */ + patch_branch(ibase + (0x1c0 / 4) + 1, + (unsigned long)&exc_data_tlb_miss_htw_book3e, 0); + patch_branch(ibase + (0x1e0 / 4) + 1, + (unsigned long)&exc_instruction_tlb_miss_htw_book3e, 0); book3e_htw_enabled = 1; } pr_info("MMU: Book3E Page Tables %s\n", -- cgit v1.2.3-18-g5258 From 03247157f73912c98baa918cf46b98ee5483d7f8 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 9 Jul 2010 15:34:50 +1000 Subject: powerpc/book3e: Add TLB dump in xmon for Book3E Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/xmon/xmon.c | 152 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 152 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 8bad7d5f32a..0554445200b 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -155,6 +155,9 @@ static int do_spu_cmd(void); #ifdef CONFIG_44x static void dump_tlb_44x(void); #endif +#ifdef CONFIG_PPC_BOOK3E +static void dump_tlb_book3e(void); +#endif static int xmon_no_auto_backtrace; @@ -887,6 +890,11 @@ cmds(struct pt_regs *excp) case 'u': dump_tlb_44x(); break; +#endif +#ifdef CONFIG_PPC_BOOK3E + case 'u': + dump_tlb_book3e(); + break; #endif default: printf("Unrecognized command: "); @@ -2701,6 +2709,150 @@ static void dump_tlb_44x(void) } #endif /* CONFIG_44x */ +#ifdef CONFIG_PPC_BOOK3E +static void dump_tlb_book3e(void) +{ + u32 mmucfg, pidmask, lpidmask; + u64 ramask; + int i, tlb, ntlbs, pidsz, lpidsz, rasz, lrat = 0; + int mmu_version; + static const char *pgsz_names[] = { + " 1K", + " 2K", + " 4K", + " 8K", + " 16K", + " 32K", + " 64K", + "128K", + "256K", + "512K", + " 1M", + " 2M", + " 4M", + " 8M", + " 16M", + " 32M", + " 64M", + "128M", + "256M", + "512M", + " 1G", + " 2G", + " 4G", + " 8G", + " 16G", + " 32G", + " 64G", + "128G", + "256G", + "512G", + " 1T", + " 2T", + }; + + /* Gather some infos about the MMU */ + mmucfg = mfspr(SPRN_MMUCFG); + mmu_version = (mmucfg & 3) + 1; + ntlbs = ((mmucfg >> 2) & 3) + 1; + pidsz = ((mmucfg >> 6) & 0x1f) + 1; + lpidsz = (mmucfg >> 24) & 0xf; + rasz = (mmucfg >> 16) & 0x7f; + if ((mmu_version > 1) && (mmucfg & 0x10000)) + lrat = 1; + printf("Book3E MMU MAV=%d.0,%d TLBs,%d-bit PID,%d-bit LPID,%d-bit RA\n", + mmu_version, ntlbs, pidsz, lpidsz, rasz); + pidmask = (1ul << pidsz) - 1; + lpidmask = (1ul << lpidsz) - 1; + ramask = (1ull << rasz) - 1; + + for (tlb = 0; tlb < ntlbs; tlb++) { + u32 tlbcfg; + int nent, assoc, new_cc = 1; + printf("TLB %d:\n------\n", tlb); + switch(tlb) { + case 0: + tlbcfg = mfspr(SPRN_TLB0CFG); + break; + case 1: + tlbcfg = mfspr(SPRN_TLB1CFG); + break; + case 2: + tlbcfg = mfspr(SPRN_TLB2CFG); + break; + case 3: + tlbcfg = mfspr(SPRN_TLB3CFG); + break; + default: + printf("Unsupported TLB number !\n"); + continue; + } + nent = tlbcfg & 0xfff; + assoc = (tlbcfg >> 24) & 0xff; + for (i = 0; i < nent; i++) { + u32 mas0 = MAS0_TLBSEL(tlb); + u32 mas1 = MAS1_TSIZE(BOOK3E_PAGESZ_4K); + u64 mas2 = 0; + u64 mas7_mas3; + int esel = i, cc = i; + + if (assoc != 0) { + cc = i / assoc; + esel = i % assoc; + mas2 = cc * 0x1000; + } + + mas0 |= MAS0_ESEL(esel); + mtspr(SPRN_MAS0, mas0); + mtspr(SPRN_MAS1, mas1); + mtspr(SPRN_MAS2, mas2); + asm volatile("tlbre 0,0,0" : : : "memory"); + mas1 = mfspr(SPRN_MAS1); + mas2 = mfspr(SPRN_MAS2); + mas7_mas3 = mfspr(SPRN_MAS7_MAS3); + if (assoc && (i % assoc) == 0) + new_cc = 1; + if (!(mas1 & MAS1_VALID)) + continue; + if (assoc == 0) + printf("%04x- ", i); + else if (new_cc) + printf("%04x-%c", cc, 'A' + esel); + else + printf(" |%c", 'A' + esel); + new_cc = 0; + printf(" %016llx %04x %s %c%c AS%c", + mas2 & ~0x3ffull, + (mas1 >> 16) & 0x3fff, + pgsz_names[(mas1 >> 7) & 0x1f], + mas1 & MAS1_IND ? 'I' : ' ', + mas1 & MAS1_IPROT ? 'P' : ' ', + mas1 & MAS1_TS ? '1' : '0'); + printf(" %c%c%c%c%c%c%c", + mas2 & MAS2_X0 ? 'a' : ' ', + mas2 & MAS2_X1 ? 'v' : ' ', + mas2 & MAS2_W ? 'w' : ' ', + mas2 & MAS2_I ? 'i' : ' ', + mas2 & MAS2_M ? 'm' : ' ', + mas2 & MAS2_G ? 'g' : ' ', + mas2 & MAS2_E ? 'e' : ' '); + printf(" %016llx", mas7_mas3 & ramask & ~0x7ffull); + if (mas1 & MAS1_IND) + printf(" %s\n", + pgsz_names[(mas7_mas3 >> 1) & 0x1f]); + else + printf(" U%c%c%c S%c%c%c\n", + mas7_mas3 & MAS3_UX ? 'x' : ' ', + mas7_mas3 & MAS3_UW ? 'w' : ' ', + mas7_mas3 & MAS3_UR ? 'r' : ' ', + mas7_mas3 & MAS3_SX ? 'x' : ' ', + mas7_mas3 & MAS3_SW ? 'w' : ' ', + mas7_mas3 & MAS3_SR ? 'r' : ' '); + } + } +} +#endif /* CONFIG_PPC_BOOK3E */ + static void xmon_init(int enable) { #ifdef CONFIG_PPC_ISERIES -- cgit v1.2.3-18-g5258 From f2b26c923518e03959142715a2b7615cb161cd16 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 9 Jul 2010 14:57:43 +1000 Subject: powerpc/book3e: Adjust the page sizes list based on MMU config Use the MMU config registers to scan for available direct and indirect page sizes and print out the result. Will be needed for future hugetlbfs implementation. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/mmu-book3e.h | 4 + arch/powerpc/include/asm/reg_booke.h | 1 + arch/powerpc/mm/tlb_nohash.c | 136 ++++++++++++++++++++++++++-------- 3 files changed, 109 insertions(+), 32 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h index 74695816205..87a1d787c5b 100644 --- a/arch/powerpc/include/asm/mmu-book3e.h +++ b/arch/powerpc/include/asm/mmu-book3e.h @@ -193,6 +193,10 @@ struct mmu_psize_def { unsigned int shift; /* number of bits */ unsigned int enc; /* PTE encoding */ + unsigned int ind; /* Corresponding indirect page size shift */ + unsigned int flags; +#define MMU_PAGE_SIZE_DIRECT 0x1 /* Supported as a direct size */ +#define MMU_PAGE_SIZE_INDIRECT 0x2 /* Supported as an indirect size */ }; extern struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT]; diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h index 66dc6f0d3ad..667a498eaee 100644 --- a/arch/powerpc/include/asm/reg_booke.h +++ b/arch/powerpc/include/asm/reg_booke.h @@ -62,6 +62,7 @@ #define SPRN_TLB0PS 0x158 /* TLB 0 Page Size Register */ #define SPRN_MAS5_MAS6 0x15c /* MMU Assist Register 5 || 6 */ #define SPRN_MAS8_MAS1 0x15d /* MMU Assist Register 8 || 1 */ +#define SPRN_EPTCFG 0x15e /* Embedded Page Table Config */ #define SPRN_MAS7_MAS3 0x174 /* MMU Assist Register 7 || 3 */ #define SPRN_MAS0_MAS1 0x175 /* MMU Assist Register 0 || 1 */ #define SPRN_IVOR0 0x190 /* Interrupt Vector Offset Register 0 */ diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c index 2ce42bf1f67..3b10f804b73 100644 --- a/arch/powerpc/mm/tlb_nohash.c +++ b/arch/powerpc/mm/tlb_nohash.c @@ -46,6 +46,7 @@ struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = { [MMU_PAGE_4K] = { .shift = 12, + .ind = 20, .enc = BOOK3E_PAGESZ_4K, }, [MMU_PAGE_16K] = { @@ -54,6 +55,7 @@ struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = { }, [MMU_PAGE_64K] = { .shift = 16, + .ind = 28, .enc = BOOK3E_PAGESZ_64K, }, [MMU_PAGE_1M] = { @@ -62,6 +64,7 @@ struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = { }, [MMU_PAGE_16M] = { .shift = 24, + .ind = 36, .enc = BOOK3E_PAGESZ_16M, }, [MMU_PAGE_256M] = { @@ -344,16 +347,108 @@ void tlb_flush_pgtable(struct mmu_gather *tlb, unsigned long address) } } -/* - * Early initialization of the MMU TLB code - */ -static void __early_init_mmu(int boot_cpu) +static void setup_page_sizes(void) +{ + unsigned int tlb0cfg = mfspr(SPRN_TLB0CFG); + unsigned int tlb0ps = mfspr(SPRN_TLB0PS); + unsigned int eptcfg = mfspr(SPRN_EPTCFG); + int i, psize; + + /* Look for supported direct sizes */ + for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) { + struct mmu_psize_def *def = &mmu_psize_defs[psize]; + + if (tlb0ps & (1U << (def->shift - 10))) + def->flags |= MMU_PAGE_SIZE_DIRECT; + } + + /* Indirect page sizes supported ? */ + if ((tlb0cfg & TLBnCFG_IND) == 0) + goto no_indirect; + + /* Now, we only deal with one IND page size for each + * direct size. Hopefully all implementations today are + * unambiguous, but we might want to be careful in the + * future. + */ + for (i = 0; i < 3; i++) { + unsigned int ps, sps; + + sps = eptcfg & 0x1f; + eptcfg >>= 5; + ps = eptcfg & 0x1f; + eptcfg >>= 5; + if (!ps || !sps) + continue; + for (psize = 0; psize < MMU_PAGE_COUNT; psize++) { + struct mmu_psize_def *def = &mmu_psize_defs[psize]; + + if (ps == (def->shift - 10)) + def->flags |= MMU_PAGE_SIZE_INDIRECT; + if (sps == (def->shift - 10)) + def->ind = ps + 10; + } + } + no_indirect: + + /* Cleanup array and print summary */ + pr_info("MMU: Supported page sizes\n"); + for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) { + struct mmu_psize_def *def = &mmu_psize_defs[psize]; + const char *__page_type_names[] = { + "unsupported", + "direct", + "indirect", + "direct & indirect" + }; + if (def->flags == 0) { + def->shift = 0; + continue; + } + pr_info(" %8ld KB as %s\n", 1ul << (def->shift - 10), + __page_type_names[def->flags & 0x3]); + } +} + +static void setup_mmu_htw(void) { extern unsigned int interrupt_base_book3e; extern unsigned int exc_data_tlb_miss_htw_book3e; extern unsigned int exc_instruction_tlb_miss_htw_book3e; unsigned int *ibase = &interrupt_base_book3e; + + /* Check if HW tablewalk is present, and if yes, enable it by: + * + * - patching the TLB miss handlers to branch to the + * one dedicates to it + * + * - setting the global book3e_htw_enabled + */ + unsigned int tlb0cfg = mfspr(SPRN_TLB0CFG); + + if ((tlb0cfg & TLBnCFG_IND) && + (tlb0cfg & TLBnCFG_PT)) { + /* Our exceptions vectors start with a NOP and -then- a branch + * to deal with single stepping from userspace which stops on + * the second instruction. Thus we need to patch the second + * instruction of the exception, not the first one + */ + patch_branch(ibase + (0x1c0 / 4) + 1, + (unsigned long)&exc_data_tlb_miss_htw_book3e, 0); + patch_branch(ibase + (0x1e0 / 4) + 1, + (unsigned long)&exc_instruction_tlb_miss_htw_book3e, 0); + book3e_htw_enabled = 1; + } + pr_info("MMU: Book3E Page Tables %s\n", + book3e_htw_enabled ? "Enabled" : "Disabled"); +} + +/* + * Early initialization of the MMU TLB code + */ +static void __early_init_mmu(int boot_cpu) +{ unsigned int mas4; /* XXX This will have to be decided at runtime, but right @@ -370,40 +465,17 @@ static void __early_init_mmu(int boot_cpu) */ mmu_vmemmap_psize = MMU_PAGE_16M; - /* Check if HW tablewalk is present, and if yes, enable it by: - * - * - patching the TLB miss handlers to branch to the - * one dedicates to it - * - * - setting the global book3e_htw_enabled - * - * - Set MAS4:INDD and default page size - */ - /* XXX This code only checks for TLB 0 capabilities and doesn't * check what page size combos are supported by the HW. It * also doesn't handle the case where a separate array holds * the IND entries from the array loaded by the PT. */ if (boot_cpu) { - unsigned int tlb0cfg = mfspr(SPRN_TLB0CFG); - - /* Check if HW loader is supported */ - if ((tlb0cfg & TLBnCFG_IND) && - (tlb0cfg & TLBnCFG_PT)) { - /* Our exceptions vectors start with a NOP and -then- a branch - * to deal with single stepping from userspace which stops on - * the second instruction. Thus we need to patch the second - * instruction of the exception, not the first one - */ - patch_branch(ibase + (0x1c0 / 4) + 1, - (unsigned long)&exc_data_tlb_miss_htw_book3e, 0); - patch_branch(ibase + (0x1e0 / 4) + 1, - (unsigned long)&exc_instruction_tlb_miss_htw_book3e, 0); - book3e_htw_enabled = 1; - } - pr_info("MMU: Book3E Page Tables %s\n", - book3e_htw_enabled ? "Enabled" : "Disabled"); + /* Look for supported page sizes */ + setup_page_sizes(); + + /* Look for HW tablewalk support */ + setup_mmu_htw(); } /* Set MAS4 based on page table setting */ -- cgit v1.2.3-18-g5258 From 1caca371e80b0d40352512806368f6ff43e2cf52 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 9 Jul 2010 15:18:44 +1000 Subject: powerpc/oprofile: Don't build server oprofile drivers on 64-bit BookE They will fail to build due to the lack of mtmsrd, and wouldn't be useful anyways Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/oprofile/Makefile | 2 +- arch/powerpc/oprofile/common.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/oprofile/Makefile b/arch/powerpc/oprofile/Makefile index 73e1c2ca055..e219ca43962 100644 --- a/arch/powerpc/oprofile/Makefile +++ b/arch/powerpc/oprofile/Makefile @@ -16,6 +16,6 @@ oprofile-y := $(DRIVER_OBJS) common.o backtrace.o oprofile-$(CONFIG_OPROFILE_CELL) += op_model_cell.o \ cell/spu_profiler.o cell/vma_map.o \ cell/spu_task_sync.o -oprofile-$(CONFIG_PPC64) += op_model_rs64.o op_model_power4.o op_model_pa6t.o +oprofile-$(CONFIG_PPC_BOOK3S_64) += op_model_rs64.o op_model_power4.o op_model_pa6t.o oprofile-$(CONFIG_FSL_EMB_PERFMON) += op_model_fsl_emb.o oprofile-$(CONFIG_6xx) += op_model_7450.o diff --git a/arch/powerpc/oprofile/common.c b/arch/powerpc/oprofile/common.c index 21f16edf6c8..d65e68f3cb2 100644 --- a/arch/powerpc/oprofile/common.c +++ b/arch/powerpc/oprofile/common.c @@ -199,7 +199,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) return -ENODEV; switch (cur_cpu_spec->oprofile_type) { -#ifdef CONFIG_PPC64 +#ifdef CONFIG_PPC_BOOK3S_64 #ifdef CONFIG_OPROFILE_CELL case PPC_OPROFILE_CELL: if (firmware_has_feature(FW_FEATURE_LPAR)) -- cgit v1.2.3-18-g5258 From c76986cca8379db619de4b6c6b7359125df0e341 Mon Sep 17 00:00:00 2001 From: Christian Dietrich Date: Fri, 16 Jul 2010 02:29:02 +0000 Subject: Remove REDWOOD_[456] config options and conditional code The config options for REDWOOD_[456] were commented out in the powerpc Kconfig. The ifdefs referencing this options therefore are dead and all references to this can be removed (Also dependencies in other KConfig files). Signed-off-by: Christian Dietrich Signed-off-by: Christoph Egger Acked-by: David S. Miller Acked-by: Benjamin Herrenschmidt Signed-off-by: Josh Boyer --- arch/powerpc/platforms/40x/Kconfig | 16 ---------------- 1 file changed, 16 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig index ec64264f7a5..b72176434eb 100644 --- a/arch/powerpc/platforms/40x/Kconfig +++ b/arch/powerpc/platforms/40x/Kconfig @@ -71,22 +71,6 @@ config MAKALU help This option enables support for the AMCC PPC405EX board. -#config REDWOOD_5 -# bool "Redwood-5" -# depends on 40x -# default n -# select STB03xxx -# help -# This option enables support for the IBM STB04 evaluation board. - -#config REDWOOD_6 -# bool "Redwood-6" -# depends on 40x -# default n -# select STB03xxx -# help -# This option enables support for the IBM STBx25xx evaluation board. - #config SYCAMORE # bool "Sycamore" # depends on 40x -- cgit v1.2.3-18-g5258 From 9a52e392bd053f1d282488517125c6c1ab77006a Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Thu, 3 Jun 2010 22:29:59 +0000 Subject: powerpc/44x: Fix UART2/3 interrupt assignment in PPC460EX/GT dts files UART2 and UART3 on 460EX/GT have incorrect interrupt mappings right now. UART2 should be 28 (0x1c) and UART3 29 (0x1d). This patch fixes this and switches to using decimal number instead of hex, since the AppliedMicro (AMCC) users manuals describe their inerrupt numbers in decimal. Thanks to Fabien Proriol for pointing this out. Signed-off-by: Stefan Roese Cc: Fabien Proriol Cc: Josh Boyer Signed-off-by: Josh Boyer --- arch/powerpc/boot/dts/canyonlands.dts | 4 ++-- arch/powerpc/boot/dts/glacier.dts | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts index cd56bb5b347..5806ef0b860 100644 --- a/arch/powerpc/boot/dts/canyonlands.dts +++ b/arch/powerpc/boot/dts/canyonlands.dts @@ -270,7 +270,7 @@ clock-frequency = <0>; /* Filled in by U-Boot */ current-speed = <0>; /* Filled in by U-Boot */ interrupt-parent = <&UIC1>; - interrupts = <0x1d 0x4>; + interrupts = <28 0x4>; }; UART3: serial@ef600600 { @@ -281,7 +281,7 @@ clock-frequency = <0>; /* Filled in by U-Boot */ current-speed = <0>; /* Filled in by U-Boot */ interrupt-parent = <&UIC1>; - interrupts = <0x1e 0x4>; + interrupts = <29 0x4>; }; IIC0: i2c@ef600700 { diff --git a/arch/powerpc/boot/dts/glacier.dts b/arch/powerpc/boot/dts/glacier.dts index d62a4fb6f93..e618fc4cbc9 100644 --- a/arch/powerpc/boot/dts/glacier.dts +++ b/arch/powerpc/boot/dts/glacier.dts @@ -259,7 +259,7 @@ clock-frequency = <0>; /* Filled in by U-Boot */ current-speed = <0>; /* Filled in by U-Boot */ interrupt-parent = <&UIC1>; - interrupts = <0x1d 0x4>; + interrupts = <28 0x4>; }; UART3: serial@ef600600 { @@ -270,7 +270,7 @@ clock-frequency = <0>; /* Filled in by U-Boot */ current-speed = <0>; /* Filled in by U-Boot */ interrupt-parent = <&UIC1>; - interrupts = <0x1e 0x4>; + interrupts = <29 0x4>; }; IIC0: i2c@ef600700 { -- cgit v1.2.3-18-g5258 From ff349103964d43c28b7b80bdecf7ace0113b3dda Mon Sep 17 00:00:00 2001 From: Lee Nipper Date: Fri, 9 Jul 2010 01:17:16 +0000 Subject: powerpc/40x: Distinguish AMCC PowerPC 405EX and 405EXr correctly The recent AMCC 405EX Rev D without Security uses a PVR value that matches the old 405EXr Rev A/B with Security. The 405EX Rev D without Security would be shown incorrectly as an 405EXr. The pvr_mask of 0xffff0004 is no longer sufficient to distinguish the 405EX from 405EXr. This patch replaces 2 entries in the cpu_specs table and adds 8 more, each using pvr_mask of 0xffff000f and appropriate pvr_value to distinguish the AMCC PowerPC 405EX and 405EXr instances. The cpu_name for these entries now includes the Rev, in similar fashion to the 440GX. Signed-off-by: Lee Nipper Signed-off-by: Josh Boyer --- arch/powerpc/kernel/cputable.c | 118 ++++++++++++++++++++++++++++++++++++++--- 1 file changed, 111 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 87aa0f3c604..65e2b4e10f9 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -1364,10 +1364,10 @@ static struct cpu_spec __initdata cpu_specs[] = { .machine_check = machine_check_4xx, .platform = "ppc405", }, - { /* 405EX */ - .pvr_mask = 0xffff0004, - .pvr_value = 0x12910004, - .cpu_name = "405EX", + { /* 405EX Rev. A/B with Security */ + .pvr_mask = 0xffff000f, + .pvr_value = 0x12910007, + .cpu_name = "405EX Rev. A/B", .cpu_features = CPU_FTRS_40X, .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, @@ -1377,10 +1377,114 @@ static struct cpu_spec __initdata cpu_specs[] = { .machine_check = machine_check_4xx, .platform = "ppc405", }, - { /* 405EXr */ - .pvr_mask = 0xffff0004, + { /* 405EX Rev. C without Security */ + .pvr_mask = 0xffff000f, + .pvr_value = 0x1291000d, + .cpu_name = "405EX Rev. C", + .cpu_features = CPU_FTRS_40X, + .cpu_user_features = PPC_FEATURE_32 | + PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, + .mmu_features = MMU_FTR_TYPE_40x, + .icache_bsize = 32, + .dcache_bsize = 32, + .machine_check = machine_check_4xx, + .platform = "ppc405", + }, + { /* 405EX Rev. C with Security */ + .pvr_mask = 0xffff000f, + .pvr_value = 0x1291000f, + .cpu_name = "405EX Rev. C", + .cpu_features = CPU_FTRS_40X, + .cpu_user_features = PPC_FEATURE_32 | + PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, + .mmu_features = MMU_FTR_TYPE_40x, + .icache_bsize = 32, + .dcache_bsize = 32, + .machine_check = machine_check_4xx, + .platform = "ppc405", + }, + { /* 405EX Rev. D without Security */ + .pvr_mask = 0xffff000f, + .pvr_value = 0x12910003, + .cpu_name = "405EX Rev. D", + .cpu_features = CPU_FTRS_40X, + .cpu_user_features = PPC_FEATURE_32 | + PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, + .mmu_features = MMU_FTR_TYPE_40x, + .icache_bsize = 32, + .dcache_bsize = 32, + .machine_check = machine_check_4xx, + .platform = "ppc405", + }, + { /* 405EX Rev. D with Security */ + .pvr_mask = 0xffff000f, + .pvr_value = 0x12910005, + .cpu_name = "405EX Rev. D", + .cpu_features = CPU_FTRS_40X, + .cpu_user_features = PPC_FEATURE_32 | + PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, + .mmu_features = MMU_FTR_TYPE_40x, + .icache_bsize = 32, + .dcache_bsize = 32, + .machine_check = machine_check_4xx, + .platform = "ppc405", + }, + { /* 405EXr Rev. A/B without Security */ + .pvr_mask = 0xffff000f, + .pvr_value = 0x12910001, + .cpu_name = "405EXr Rev. A/B", + .cpu_features = CPU_FTRS_40X, + .cpu_user_features = PPC_FEATURE_32 | + PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, + .mmu_features = MMU_FTR_TYPE_40x, + .icache_bsize = 32, + .dcache_bsize = 32, + .machine_check = machine_check_4xx, + .platform = "ppc405", + }, + { /* 405EXr Rev. C without Security */ + .pvr_mask = 0xffff000f, + .pvr_value = 0x12910009, + .cpu_name = "405EXr Rev. C", + .cpu_features = CPU_FTRS_40X, + .cpu_user_features = PPC_FEATURE_32 | + PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, + .mmu_features = MMU_FTR_TYPE_40x, + .icache_bsize = 32, + .dcache_bsize = 32, + .machine_check = machine_check_4xx, + .platform = "ppc405", + }, + { /* 405EXr Rev. C with Security */ + .pvr_mask = 0xffff000f, + .pvr_value = 0x1291000b, + .cpu_name = "405EXr Rev. C", + .cpu_features = CPU_FTRS_40X, + .cpu_user_features = PPC_FEATURE_32 | + PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, + .mmu_features = MMU_FTR_TYPE_40x, + .icache_bsize = 32, + .dcache_bsize = 32, + .machine_check = machine_check_4xx, + .platform = "ppc405", + }, + { /* 405EXr Rev. D without Security */ + .pvr_mask = 0xffff000f, .pvr_value = 0x12910000, - .cpu_name = "405EXr", + .cpu_name = "405EXr Rev. D", + .cpu_features = CPU_FTRS_40X, + .cpu_user_features = PPC_FEATURE_32 | + PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, + .mmu_features = MMU_FTR_TYPE_40x, + .icache_bsize = 32, + .dcache_bsize = 32, + .machine_check = machine_check_4xx, + .platform = "ppc405", + }, + { /* 405EXr Rev. D with Security */ + .pvr_mask = 0xffff000f, + .pvr_value = 0x12910002, + .cpu_name = "405EXr Rev. D", .cpu_features = CPU_FTRS_40X, .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, -- cgit v1.2.3-18-g5258 From fc53b4202e61c7e9008c241933ae282aab8a6082 Mon Sep 17 00:00:00 2001 From: Matt Evans Date: Wed, 7 Jul 2010 21:55:37 +0000 Subject: powerpc/kexec: Switch to a static PACA on the way out With dynamic PACAs, the kexecing CPU's PACA won't lie within the kernel static data and there is a chance that something may stomp it when preparing to kexec. This patch switches this final CPU to a static PACA just before we pull the switch. Signed-off-by: Matt Evans Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/paca.h | 2 +- arch/powerpc/kernel/machine_kexec_64.c | 20 ++++++++++++++++++++ arch/powerpc/kernel/paca.c | 10 ++++++++++ arch/powerpc/kernel/setup_64.c | 10 ---------- 4 files changed, 31 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h index 8ce7963ad41..1ff6662f7fa 100644 --- a/arch/powerpc/include/asm/paca.h +++ b/arch/powerpc/include/asm/paca.h @@ -146,7 +146,7 @@ struct paca_struct { extern struct paca_struct *paca; extern __initdata struct paca_struct boot_paca; extern void initialise_paca(struct paca_struct *new_paca, int cpu); - +extern void setup_paca(struct paca_struct *new_paca); extern void allocate_pacas(void); extern void free_unused_pacas(void); diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c index de6b70eac51..022d2f613b7 100644 --- a/arch/powerpc/kernel/machine_kexec_64.c +++ b/arch/powerpc/kernel/machine_kexec_64.c @@ -260,6 +260,12 @@ static void kexec_prepare_cpus(void) static union thread_union kexec_stack __init_task_data = { }; +/* + * For similar reasons to the stack above, the kexecing CPU needs to be on a + * static PACA; we switch to kexec_paca. + */ +struct paca_struct kexec_paca; + /* Our assembly helper, in kexec_stub.S */ extern NORET_TYPE void kexec_sequence(void *newstack, unsigned long start, void *image, void *control, @@ -287,6 +293,20 @@ void default_machine_kexec(struct kimage *image) kexec_stack.thread_info.task = current_thread_info()->task; kexec_stack.thread_info.flags = 0; + /* We need a static PACA, too; copy this CPU's PACA over and switch to + * it. Also poison per_cpu_offset to catch anyone using non-static + * data. + */ + memcpy(&kexec_paca, get_paca(), sizeof(struct paca_struct)); + kexec_paca.data_offset = 0xedeaddeadeeeeeeeUL; + paca = (struct paca_struct *)RELOC_HIDE(&kexec_paca, 0) - + kexec_paca.paca_index; + setup_paca(&kexec_paca); + + /* XXX: If anyone does 'dynamic lppacas' this will also need to be + * switched to a static version! + */ + /* Some things are best done in assembly. Finding globals with * a toc is easier in C, so pass in what we can. */ diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c index f88acf0218d..3db8d64f40e 100644 --- a/arch/powerpc/kernel/paca.c +++ b/arch/powerpc/kernel/paca.c @@ -105,6 +105,16 @@ void __init initialise_paca(struct paca_struct *new_paca, int cpu) #endif /* CONFIG_PPC_STD_MMU_64 */ } +/* Put the paca pointer into r13 and SPRG_PACA */ +void setup_paca(struct paca_struct *new_paca) +{ + local_paca = new_paca; + mtspr(SPRN_SPRG_PACA, local_paca); +#ifdef CONFIG_PPC_BOOK3E + mtspr(SPRN_SPRG_TLB_EXFRAME, local_paca->extlb); +#endif +} + static int __initdata paca_size; void __init allocate_pacas(void) diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index c352f322dbd..96e662c1d46 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -142,16 +142,6 @@ early_param("smt-enabled", early_smt_enabled); #define check_smt_enabled() #endif /* CONFIG_SMP */ -/* Put the paca pointer into r13 and SPRG_PACA */ -static void __init setup_paca(struct paca_struct *new_paca) -{ - local_paca = new_paca; - mtspr(SPRN_SPRG_PACA, local_paca); -#ifdef CONFIG_PPC_BOOK3E - mtspr(SPRN_SPRG_TLB_EXFRAME, local_paca->extlb); -#endif -} - /* * Early initialization entry point. This is called by head.S * with MMU translation disabled. We rely on the "feature" of -- cgit v1.2.3-18-g5258 From bbc8e30f17077f83fdeeeca0cf70e0f179279282 Mon Sep 17 00:00:00 2001 From: Matthew McClintock Date: Wed, 21 Jul 2010 11:14:54 +0000 Subject: powerpc/crashdump: Fix issues with kexec and 36bit physical addr Fix sizes of variables so correct values are exported via /proc. Cast variable in comparison to avoid compiler error. Signed-off-by: Matthew McClintock Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/crash_dump.c | 4 ++-- arch/powerpc/kernel/machine_kexec.c | 10 +++++----- 2 files changed, 7 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c index 5fb667a6089..d254132f08f 100644 --- a/arch/powerpc/kernel/crash_dump.c +++ b/arch/powerpc/kernel/crash_dump.c @@ -128,9 +128,9 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf, if (!csize) return 0; - csize = min(csize, PAGE_SIZE); + csize = min_t(size_t, csize, PAGE_SIZE); - if (pfn < max_pfn) { + if ((min_low_pfn < pfn) && (pfn < max_pfn)) { vaddr = __va(pfn << PAGE_SHIFT); csize = copy_oldmem_vaddr(vaddr, buf, csize, offset, userbuf); } else { diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c index bb3d893a835..6ff15f03dcc 100644 --- a/arch/powerpc/kernel/machine_kexec.c +++ b/arch/powerpc/kernel/machine_kexec.c @@ -144,24 +144,24 @@ int overlaps_crashkernel(unsigned long start, unsigned long size) } /* Values we need to export to the second kernel via the device tree. */ -static unsigned long kernel_end; -static unsigned long crashk_size; +static phys_addr_t kernel_end; +static phys_addr_t crashk_size; static struct property kernel_end_prop = { .name = "linux,kernel-end", - .length = sizeof(unsigned long), + .length = sizeof(phys_addr_t), .value = &kernel_end, }; static struct property crashk_base_prop = { .name = "linux,crashkernel-base", - .length = sizeof(unsigned long), + .length = sizeof(phys_addr_t), .value = &crashk_res.start, }; static struct property crashk_size_prop = { .name = "linux,crashkernel-size", - .length = sizeof(unsigned long), + .length = sizeof(phys_addr_t), .value = &crashk_size, }; -- cgit v1.2.3-18-g5258 From ea01c6b487d53571e2e5f15a0fd41700c1e0486d Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 12 Jul 2010 10:49:55 +0000 Subject: powerpc: Remove unnecessary casts of private_data Signed-off-by: Joe Perches Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kvm/timing.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/kvm/timing.c b/arch/powerpc/kvm/timing.c index 70378551c0c..46fa04f12a9 100644 --- a/arch/powerpc/kvm/timing.c +++ b/arch/powerpc/kvm/timing.c @@ -182,7 +182,7 @@ static ssize_t kvmppc_exit_timing_write(struct file *file, } if (c == 'c') { - struct seq_file *seqf = (struct seq_file *)file->private_data; + struct seq_file *seqf = file->private_data; struct kvm_vcpu *vcpu = seqf->private; /* Write does not affect our buffers previously generated with * show. seq_file is locked here to prevent races of init with -- cgit v1.2.3-18-g5258 From 67238fb721639046b5d76488317522af4ece9d61 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Tue, 13 Jul 2010 03:46:09 +0000 Subject: powerpc: Add vmcoreinfo symbols to allow makdumpfile to filter core files properly Signed-off-by: Neil Horman machine_kexec.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) Reviewed-by: WANG Cong Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/machine_kexec.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c index 6ff15f03dcc..47905c09286 100644 --- a/arch/powerpc/kernel/machine_kexec.c +++ b/arch/powerpc/kernel/machine_kexec.c @@ -45,6 +45,18 @@ void machine_kexec_cleanup(struct kimage *image) ppc_md.machine_kexec_cleanup(image); } +void arch_crash_save_vmcoreinfo(void) +{ + +#ifdef CONFIG_NEED_MULTIPLE_NODES + VMCOREINFO_SYMBOL(node_data); + VMCOREINFO_LENGTH(node_data, MAX_NUMNODES); +#endif +#ifndef CONFIG_NEED_MULTIPLE_NODES + VMCOREINFO_SYMBOL(contig_page_data); +#endif +} + /* * Do not allocate memory (or fail in any way) in machine_kexec(). * We are past the point of no return, committed to rebooting now. -- cgit v1.2.3-18-g5258 From e9ae9dabfc1df26d5eff0102c4d359f534e11087 Mon Sep 17 00:00:00 2001 From: Brian King Date: Wed, 14 Jul 2010 08:48:13 +0000 Subject: powerpc: Remove redundant xics badness warning While testing cpu offlining, we are regularly seeing the WARN_ON go off in xics_ipi_dispatch. It can occur when an IPI gets sent to the CPU while it is going offline. There is already a similar WARN_ON in the handlers for PPC_MSG_CALL_FUNCTION and PPC_MSG_CALL_FUNC_SINGLE, so the warning is not needed in that path. The debugger handler handles this case by simply ignoring IPIs for offline CPUs, so no warning is needed there. And the reschedule IPI, which is what is occurring in our test environment, can be safely ignored, so we can simply remove the WARN_ON from xics_ipi_dispatch. Signed-off-by: Brian King Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/xics.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index f19d1946839..5b22b07c8f6 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -549,8 +549,6 @@ static irqreturn_t xics_ipi_dispatch(int cpu) { unsigned long *tgt = &per_cpu(xics_ipi_message, cpu); - WARN_ON(cpu_is_offline(cpu)); - mb(); /* order mmio clearing qirr */ while (*tgt) { if (test_and_clear_bit(PPC_MSG_CALL_FUNCTION, tgt)) { -- cgit v1.2.3-18-g5258 From 1927445a7376e183072e6147a9641088b9b6a30e Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 15 Jul 2010 07:38:16 +0000 Subject: powerpc: Fix GENERIC_ISA_DMA dependency On PowerPC we should always use generic ISA DMA API implementation as there is simply no other implementation exist. Without this patch, the following build error pops up: sound/built-in.o: In function 'snd_dma_pointer': (.text+0x74ae): undefined reference to 'dma_spin_lock' ... make: *** [.tmp_vmlinux1] Error 1 This is PPC_85xx, SMP and some sound drivers set to =y. Signed-off-by: Anton Vorontsov Acked-by: Dave Liu Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 25b28fdc676..4fa42038104 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -669,7 +669,7 @@ config NEED_SG_DMA_LENGTH config GENERIC_ISA_DMA bool - depends on PPC64 || POWER4 || 6xx && !CPM2 + depends on ISA_DMA_API default y config PPC_INDIRECT_PCI -- cgit v1.2.3-18-g5258 From d77cb21b578a5428482bc0fd187f7c0518a0b32a Mon Sep 17 00:00:00 2001 From: Tiejun Chen Date: Thu, 15 Jul 2010 20:17:11 +0000 Subject: powerpc/smp: remove the incorrect decrementer initial codes for AP We already defined start_cpu_decrementer() to invoke decrementer for AP as the following path: start_secondary() -> secondary_cpu_time_init() -> start_cpu_decrementer() So remove these incorrect codes introduced from commit: e7f75ad0 powerpc/47x: Base ppc476 support And actually we really should not enable decrementer before calling set_dec(). Signed-off-by: Tiejun Chen Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/smp.c | 8 -------- 1 file changed, 8 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 8764daad309..a61b3ddd7bb 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -499,14 +499,6 @@ int __devinit start_secondary(void *unused) current->active_mm = &init_mm; smp_store_cpu_info(cpu); - -#if defined(CONFIG_BOOKE) || defined(CONFIG_40x) - /* Clear any pending timer interrupts */ - mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS); - - /* Enable decrementer interrupt */ - mtspr(SPRN_TCR, TCR_DIE); -#endif set_dec(tb_ticks_per_jiffy); preempt_disable(); cpu_callin_map[cpu] = 1; -- cgit v1.2.3-18-g5258 From 940ce422a367c8e65404a5ef1ff5969527a06410 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sat, 31 Jul 2010 15:04:15 +1000 Subject: powerpc/pseries: Increase cpu die timeout In testing SMT disable, we have been regularly seeing the following message: Querying DEAD? cpu %i (%i) shows %i This indicates the current delay in pseries_cpu_die where we wait for the specified CPU to die, is insufficient. Usually, this does not cause a problem, but we've seen this result in BUG_ON's going off in the timer code when we try to migrate the timers off the dead cpu while a timer is still running. Increasing this delay, as is done in this patch, seems to resolve this issue. Signed-off-by: Brian King Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/hotplug-cpu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c index bbe50763536..fd50ccd4bac 100644 --- a/arch/powerpc/platforms/pseries/hotplug-cpu.c +++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c @@ -193,12 +193,12 @@ static void pseries_cpu_die(unsigned int cpu) if (get_preferred_offline_state(cpu) == CPU_STATE_INACTIVE) { cpu_status = 1; - for (tries = 0; tries < 1000; tries++) { + for (tries = 0; tries < 5000; tries++) { if (get_cpu_current_state(cpu) == CPU_STATE_INACTIVE) { cpu_status = 0; break; } - cpu_relax(); + msleep(1); } } else if (get_preferred_offline_state(cpu) == CPU_STATE_OFFLINE) { -- cgit v1.2.3-18-g5258 From ff4bb7cb9feea3d8851c0e7837dce15822acf11b Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sat, 31 Jul 2010 15:05:15 +1000 Subject: powerpc/powermac: Add PowerMac10,2 machine descriptor This adds support for the Mac Mini's that were quietly rolled out in 2005. Work still needs to be done to support suspend and WakeOnLan. Signed-off-by: Mark Crichton Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/powermac/feature.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c index 9e1b9fd7520..79bd3e89dba 100644 --- a/arch/powerpc/platforms/powermac/feature.c +++ b/arch/powerpc/platforms/powermac/feature.c @@ -2191,7 +2191,11 @@ static struct pmac_mb_def pmac_mb_defs[] = { PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, PMAC_MB_MAY_SLEEP, }, - { "iMac,1", "iMac (first generation)", + { "PowerMac10,2", "Mac mini (Late 2005)", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP, + }, + { "iMac,1", "iMac (first generation)", PMAC_TYPE_ORIG_IMAC, paddington_features, 0 }, -- cgit v1.2.3-18-g5258 From ceddee23be9fda04b928aa309fd95931bc4efb96 Mon Sep 17 00:00:00 2001 From: Robert Jennings Date: Thu, 22 Jul 2010 16:43:44 +0000 Subject: powerpc: ONLINE to OFFLINE CPU state transition during removal If a CPU remove is attempted using the 'release' interface on hardware which supports extended cede, the CPU will be put in the INACTIVE state rather than the OFFLINE state due to the default preferred_offline_state in that situation. In the INACTIVE state it will fail to be removed. This patch changes the preferred offline state to OFFLINE when an CPU is in the ONLINE state. After cpu_down() is called in dlpar_offline_cpu() the CPU will be OFFLINE and CPU removal can continue. Signed-off-by: Robert Jennings Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/dlpar.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c index d71e5858408..227c1c3d585 100644 --- a/arch/powerpc/platforms/pseries/dlpar.c +++ b/arch/powerpc/platforms/pseries/dlpar.c @@ -463,6 +463,7 @@ static int dlpar_offline_cpu(struct device_node *dn) break; if (get_cpu_current_state(cpu) == CPU_STATE_ONLINE) { + set_preferred_offline_state(cpu, CPU_STATE_OFFLINE); cpu_maps_update_done(); rc = cpu_down(cpu); if (rc) -- cgit v1.2.3-18-g5258 From 2c48a7d615b82e030196e8b61ab0c7933be16dff Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Tue, 27 Jul 2010 18:26:21 +0000 Subject: powerpc: Print decimal values in prom_init.c Currently we look pretty stupid when printing out a bunch of things in prom_init.c. eg. Max number of cores passed to firmware: 0x0000000000000080 So I've change this to print in decimal: Max number of cores passed to firmware: 128 (NR_CPUS = 256) This required adding a prom_print_dec() function and changing some prom_printk() calls from %x to %lu. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/prom_init.c | 44 ++++++++++++++++++++++++++++++++--------- 1 file changed, 35 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 3b6f8ae9b8c..941ff4dbc56 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -311,6 +311,24 @@ static void __init prom_print_hex(unsigned long val) call_prom("write", 3, 1, _prom->stdout, buf, nibbles); } +/* max number of decimal digits in an unsigned long */ +#define UL_DIGITS 21 +static void __init prom_print_dec(unsigned long val) +{ + int i, size; + char buf[UL_DIGITS+1]; + struct prom_t *_prom = &RELOC(prom); + + for (i = UL_DIGITS-1; i >= 0; i--) { + buf[i] = (val % 10) + '0'; + val = val/10; + if (val == 0) + break; + } + /* shift stuff down */ + size = UL_DIGITS - i; + call_prom("write", 3, 1, _prom->stdout, buf+i, size); +} static void __init prom_printf(const char *format, ...) { @@ -350,6 +368,14 @@ static void __init prom_printf(const char *format, ...) v = va_arg(args, unsigned long); prom_print_hex(v); break; + case 'l': + ++q; + if (*q == 'u') { /* '%lu' */ + ++q; + v = va_arg(args, unsigned long); + prom_print_dec(v); + } + break; } } } @@ -835,11 +861,11 @@ static int __init prom_count_smt_threads(void) if (plen == PROM_ERROR) break; plen >>= 2; - prom_debug("Found 0x%x smt threads per core\n", (unsigned long)plen); + prom_debug("Found %lu smt threads per core\n", (unsigned long)plen); /* Sanity check */ if (plen < 1 || plen > 64) { - prom_printf("Threads per core 0x%x out of bounds, assuming 1\n", + prom_printf("Threads per core %lu out of bounds, assuming 1\n", (unsigned long)plen); return 1; } @@ -869,12 +895,12 @@ static void __init prom_send_capabilities(void) cores = (u32 *)PTRRELOC(&ibm_architecture_vec[IBM_ARCH_VEC_NRCORES_OFFSET]); if (*cores != NR_CPUS) { prom_printf("WARNING ! " - "ibm_architecture_vec structure inconsistent: 0x%x !\n", + "ibm_architecture_vec structure inconsistent: %lu!\n", *cores); } else { *cores = DIV_ROUND_UP(NR_CPUS, prom_count_smt_threads()); - prom_printf("Max number of cores passed to firmware: 0x%x\n", - (unsigned long)*cores); + prom_printf("Max number of cores passed to firmware: %lu (NR_CPUS = %lu)\n", + *cores, NR_CPUS); } /* try calling the ibm,client-architecture-support method */ @@ -1482,7 +1508,7 @@ static void __init prom_hold_cpus(void) reg = -1; prom_getprop(node, "reg", ®, sizeof(reg)); - prom_debug("cpu hw idx = 0x%x\n", reg); + prom_debug("cpu hw idx = %lu\n", reg); /* Init the acknowledge var which will be reset by * the secondary cpu when it awakens from its OF @@ -1492,7 +1518,7 @@ static void __init prom_hold_cpus(void) if (reg != _prom->cpu) { /* Primary Thread of non-boot cpu */ - prom_printf("starting cpu hw idx %x... ", reg); + prom_printf("starting cpu hw idx %lu... ", reg); call_prom("start-cpu", 3, 0, node, secondary_hold, reg); @@ -1507,7 +1533,7 @@ static void __init prom_hold_cpus(void) } #ifdef CONFIG_SMP else - prom_printf("boot cpu hw idx %x\n", reg); + prom_printf("boot cpu hw idx %lu\n", reg); #endif /* CONFIG_SMP */ } @@ -2420,7 +2446,7 @@ static void __init prom_find_boot_cpu(void) prom_getprop(cpu_pkg, "reg", &getprop_rval, sizeof(getprop_rval)); _prom->cpu = getprop_rval; - prom_debug("Booting CPU hw index = 0x%x\n", _prom->cpu); + prom_debug("Booting CPU hw index = %lu\n", _prom->cpu); } static void __init prom_check_initrd(unsigned long r3, unsigned long r4) -- cgit v1.2.3-18-g5258 From e2f7f73717c0a2927bbe7551d90b1ec47a094361 Mon Sep 17 00:00:00 2001 From: Matt Evans Date: Thu, 29 Jul 2010 18:47:17 +0000 Subject: powerpc/kexec: Add to and tidy debug/comments in machine_kexec64.c Tidies some typos, KERN_INFO-ise an info msg, and add a debug msg showing when the final sequence starts. Also adds a comment to kexec_prepare_cpus_wait() to make note of a possible problem; the need for kexec to deal with CPUs that failed to originally start up. Signed-off-by: Matt Evans Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/machine_kexec_64.c | 29 ++++++++++++++++++++++++----- 1 file changed, 24 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c index 022d2f613b7..a0bcec3614e 100644 --- a/arch/powerpc/kernel/machine_kexec_64.c +++ b/arch/powerpc/kernel/machine_kexec_64.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include @@ -184,7 +185,20 @@ static void kexec_prepare_cpus_wait(int wait_state) hw_breakpoint_disable(); my_cpu = get_cpu(); - /* Make sure each CPU has atleast made it to the state we need */ + /* Make sure each CPU has at least made it to the state we need. + * + * FIXME: There is a (slim) chance of a problem if not all of the CPUs + * are correctly onlined. If somehow we start a CPU on boot with RTAS + * start-cpu, but somehow that CPU doesn't write callin_cpu_map[] in + * time, the boot CPU will timeout. If it does eventually execute + * stuff, the secondary will start up (paca[].cpu_start was written) and + * get into a peculiar state. If the platform supports + * smp_ops->take_timebase(), the secondary CPU will probably be spinning + * in there. If not (i.e. pseries), the secondary will continue on and + * try to online itself/idle/etc. If it survives that, we need to find + * these possible-but-not-online-but-should-be CPUs and chaperone them + * into kexec_smp_wait(). + */ for_each_online_cpu(i) { if (i == my_cpu) continue; @@ -192,9 +206,9 @@ static void kexec_prepare_cpus_wait(int wait_state) while (paca[i].kexec_state < wait_state) { barrier(); if (i != notified) { - printk( "kexec: waiting for cpu %d (physical" - " %d) to enter %i state\n", - i, paca[i].hw_cpu_id, wait_state); + printk(KERN_INFO "kexec: waiting for cpu %d " + "(physical %d) to enter %i state\n", + i, paca[i].hw_cpu_id, wait_state); notified = i; } } @@ -218,7 +232,10 @@ static void kexec_prepare_cpus(void) if (ppc_md.kexec_cpu_down) ppc_md.kexec_cpu_down(0, 0); - /* Before removing MMU mapings make sure all CPUs have entered real mode */ + /* + * Before removing MMU mappings make sure all CPUs have entered real + * mode: + */ kexec_prepare_cpus_wait(KEXEC_STATE_REAL_MODE); put_cpu(); @@ -287,6 +304,8 @@ void default_machine_kexec(struct kimage *image) if (crashing_cpu == -1) kexec_prepare_cpus(); + pr_debug("kexec: Starting switchover sequence.\n"); + /* switch to a staticly allocated stack. Based on irq stack code. * XXX: the task struct will likely be invalid once we do the copy! */ -- cgit v1.2.3-18-g5258 From e8e5c2155b0035b6e04f29be67f6444bc914005b Mon Sep 17 00:00:00 2001 From: Matt Evans Date: Thu, 29 Jul 2010 18:49:08 +0000 Subject: powerpc/kexec: Fix orphaned offline CPUs across kexec When CPU hotplug is used, some CPUs may be offline at the time a kexec is performed. The subsequent kernel may expect these CPUs to be already running, and will declare them stuck. On pseries, there's also a soft-offline (cede) state that CPUs may be in; this can also cause problems as the kexeced kernel may ask RTAS if they're online -- and RTAS would say they are. The CPU will either appear stuck, or will cause a crash as we replace its cede loop beneath it. This patch kicks each present offline CPU awake before the kexec, so that none are forever lost to these assumptions in the subsequent kernel. Now, the behaviour is that all available CPUs that were offlined are now online & usable after the kexec. This mimics the behaviour of a full reboot (on which all CPUs will be restarted). Signed-off-by: Matt Evans Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/machine_kexec_64.c | 26 +++++++++++++++++++++++++- 1 file changed, 25 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c index a0bcec3614e..583af70c4b1 100644 --- a/arch/powerpc/kernel/machine_kexec_64.c +++ b/arch/powerpc/kernel/machine_kexec_64.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include @@ -216,9 +217,32 @@ static void kexec_prepare_cpus_wait(int wait_state) mb(); } -static void kexec_prepare_cpus(void) +/* + * We need to make sure each present CPU is online. The next kernel will scan + * the device tree and assume primary threads are online and query secondary + * threads via RTAS to online them if required. If we don't online primary + * threads, they will be stuck. However, we also online secondary threads as we + * may be using 'cede offline'. In this case RTAS doesn't see the secondary + * threads as offline -- and again, these CPUs will be stuck. + * + * So, we online all CPUs that should be running, including secondary threads. + */ +static void wake_offline_cpus(void) { + int cpu = 0; + + for_each_present_cpu(cpu) { + if (!cpu_online(cpu)) { + printk(KERN_INFO "kexec: Waking offline cpu %d.\n", + cpu); + cpu_up(cpu); + } + } +} +static void kexec_prepare_cpus(void) +{ + wake_offline_cpus(); smp_call_function(kexec_smp_down, NULL, /* wait */0); local_irq_disable(); mb(); /* make sure IRQs are disabled before we say they are */ -- cgit v1.2.3-18-g5258 From 1044ea8cfd67dc70f87999906bc2849eef7b053a Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Fri, 30 Apr 2010 10:30:47 +0000 Subject: powerpc/512x: Group mpc512x board's selection menu Allow board selection in a drop-down board sub-menu like many other platforms do. Before the patch: ... [ ] Freescale MPC5121E ADS [ ] Generic support for simple MPC5121 based boards [ ] 52xx-based boards ... Patched: ... [*] 512x-based boards [ ] Freescale MPC5121E ADS [ ] Generic support for simple MPC5121 based boards [ ] 52xx-based boards ... This is a cleanup before adding new board selection entry. Signed-off-by: Anatolij Gustschin Signed-off-by: Grant Likely --- arch/powerpc/platforms/512x/Kconfig | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig index 4dac9b0525a..e9dca280a4d 100644 --- a/arch/powerpc/platforms/512x/Kconfig +++ b/arch/powerpc/platforms/512x/Kconfig @@ -1,29 +1,24 @@ config PPC_MPC512x - bool + bool "512x-based boards" + depends on 6xx select FSL_SOC select IPIC select PPC_CLOCK select PPC_PCI_CHOICE select FSL_PCI if PCI -config PPC_MPC5121 - bool - select PPC_MPC512x - config MPC5121_ADS bool "Freescale MPC5121E ADS" - depends on 6xx + depends on PPC_MPC512x select DEFAULT_UIMAGE - select PPC_MPC5121 select MPC5121_ADS_CPLD help This option enables support for the MPC5121E ADS board. config MPC5121_GENERIC bool "Generic support for simple MPC5121 based boards" - depends on 6xx + depends on PPC_MPC512x select DEFAULT_UIMAGE - select PPC_MPC5121 help This option enables support for simple MPC5121 based boards which do not need custom platform specific setup. -- cgit v1.2.3-18-g5258 From 12fb0eb4c963452f727752aae03bbef192abed40 Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Tue, 27 Jul 2010 11:26:02 +0000 Subject: powerpc/5121: add initial support for PDM360NG board Adds IFM PDM360NG device tree and platform code. Currently following is supported: - Spansion S29GL512P 256 MB NOR flash - ST Micro NAND 1 GiB flash - DIU, please use "fbcon=map:5 video=fslfb:800x480-32@60" at the kernel command line to enable PrimeView PM070WL3 Display support. - FEC - I2C - RTC, EEPROM - MSCAN - PSC UART, please pass "console=tty0 console=ttyPSC5,115200" on the kernel command line. - SPI, ADS7845 Touchscreen - USB0/1 Host - USB0 OTG Host/Device - VIU, Overlay/Capture support Signed-off-by: Markus Fischer Signed-off-by: Wolfgang Grandegger Signed-off-by: Michael Weiss Signed-off-by: Detlev Zundel Signed-off-by: Anatolij Gustschin Signed-off-by: Grant Likely --- arch/powerpc/boot/dts/pdm360ng.dts | 410 +++++++++++++++++++++++++++++++++ arch/powerpc/platforms/512x/Kconfig | 7 + arch/powerpc/platforms/512x/Makefile | 1 + arch/powerpc/platforms/512x/pdm360ng.c | 129 +++++++++++ 4 files changed, 547 insertions(+) create mode 100644 arch/powerpc/boot/dts/pdm360ng.dts create mode 100644 arch/powerpc/platforms/512x/pdm360ng.c (limited to 'arch') diff --git a/arch/powerpc/boot/dts/pdm360ng.dts b/arch/powerpc/boot/dts/pdm360ng.dts new file mode 100644 index 00000000000..94dfa5c9a7f --- /dev/null +++ b/arch/powerpc/boot/dts/pdm360ng.dts @@ -0,0 +1,410 @@ +/* + * Device Tree Source for IFM PDM360NG. + * + * Copyright 2009 - 2010 DENX Software Engineering. + * Anatolij Gustschin + * + * Based on MPC5121E ADS dts. + * Copyright 2008 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "pdm360ng"; + compatible = "ifm,pdm360ng"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&ipic>; + + aliases { + ethernet0 = ð0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5121@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <0x20>; // 32 bytes + i-cache-line-size = <0x20>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <49500000>;// 49.5 MHz (csb/4) + bus-frequency = <198000000>; // 198 MHz csb bus + clock-frequency = <396000000>; // 396 MHz ppc core + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; // 512MB at 0 + }; + + nfc@40000000 { + compatible = "fsl,mpc5121-nfc"; + reg = <0x40000000 0x100000>; + interrupts = <0x6 0x8>; + #address-cells = <0x1>; + #size-cells = <0x1>; + bank-width = <0x1>; + chips = <0x1>; + + partition@0 { + label = "nand0"; + reg = <0x0 0x40000000>; + }; + }; + + sram@50000000 { + compatible = "fsl,mpc5121-sram"; + reg = <0x50000000 0x20000>; // 128K at 0x50000000 + }; + + localbus@80000020 { + compatible = "fsl,mpc5121-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0x80000020 0x40>; + + ranges = <0x0 0x0 0xf0000000 0x10000000 /* Flash */ + 0x2 0x0 0x50040000 0x00020000>; /* CS2: MRAM */ + + flash@0,0 { + compatible = "amd,s29gl01gp", "cfi-flash"; + reg = <0 0x00000000 0x08000000 + 0 0x08000000 0x08000000>; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <4>; + device-width = <2>; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x00080000>; + read-only; + }; + partition@80000 { + label = "environment"; + reg = <0x00080000 0x00080000>; + read-only; + }; + partition@100000 { + label = "splash-image"; + reg = <0x00100000 0x00080000>; + read-only; + }; + partition@180000 { + label = "device-tree"; + reg = <0x00180000 0x00040000>; + }; + partition@1c0000 { + label = "kernel"; + reg = <0x001c0000 0x00500000>; + }; + partition@6c0000 { + label = "filesystem"; + reg = <0x006c0000 0x07940000>; + }; + }; + + mram0@2,0 { + compatible = "mtd-ram"; + reg = <2 0x00000 0x10000>; + bank-width = <2>; + }; + + mram1@2,10000 { + compatible = "mtd-ram"; + reg = <2 0x010000 0x10000>; + bank-width = <2>; + }; + }; + + soc@80000000 { + compatible = "fsl,mpc5121-immr"; + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + ranges = <0x0 0x80000000 0x400000>; + reg = <0x80000000 0x400000>; + bus-frequency = <66000000>; // 66 MHz ips bus + + // IPIC + // interrupts cell = + // sense values match linux IORESOURCE_IRQ_* defines: + // sense == 8: Level, low assertion + // sense == 2: Edge, high-to-low change + // + ipic: interrupt-controller@c00 { + compatible = "fsl,mpc5121-ipic", "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0xc00 0x100>; + }; + + rtc@a00 { // Real time clock + compatible = "fsl,mpc5121-rtc"; + reg = <0xa00 0x100>; + interrupts = <79 0x8 80 0x8>; + }; + + reset@e00 { // Reset module + compatible = "fsl,mpc5121-reset"; + reg = <0xe00 0x100>; + }; + + clock@f00 { // Clock control + compatible = "fsl,mpc5121-clock"; + reg = <0xf00 0x100>; + }; + + pmc@1000{ //Power Management Controller + compatible = "fsl,mpc5121-pmc"; + reg = <0x1000 0x100>; + interrupts = <83 0x2>; + }; + + gpio@1100 { + compatible = "fsl,mpc5121-gpio"; + reg = <0x1100 0x100>; + interrupts = <78 0x8>; + }; + + can@1300 { + compatible = "fsl,mpc5121-mscan"; + interrupts = <12 0x8>; + reg = <0x1300 0x80>; + }; + + can@1380 { + compatible = "fsl,mpc5121-mscan"; + interrupts = <13 0x8>; + reg = <0x1380 0x80>; + }; + + i2c@1700 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5121-i2c"; + reg = <0x1700 0x20>; + interrupts = <0x9 0x8>; + fsl,preserve-clocking; + + eeprom@50 { + compatible = "at,24c01"; + reg = <0x50>; + }; + + rtc@68 { + compatible = "stm,m41t00"; + reg = <0x68>; + }; + }; + + i2c@1740 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5121-i2c"; + reg = <0x1740 0x20>; + interrupts = <0xb 0x8>; + fsl,preserve-clocking; + }; + + i2ccontrol@1760 { + compatible = "fsl,mpc5121-i2c-ctrl"; + reg = <0x1760 0x8>; + }; + + axe@2000 { + compatible = "fsl,mpc5121-axe"; + reg = <0x2000 0x100>; + interrupts = <42 0x8>; + }; + + display@2100 { + compatible = "fsl,mpc5121-diu"; + reg = <0x2100 0x100>; + interrupts = <64 0x8>; + }; + + can@2300 { + compatible = "fsl,mpc5121-mscan"; + interrupts = <90 0x8>; + reg = <0x2300 0x80>; + }; + + can@2380 { + compatible = "fsl,mpc5121-mscan"; + interrupts = <91 0x8>; + reg = <0x2380 0x80>; + }; + + viu@2400 { + compatible = "fsl,mpc5121-viu"; + reg = <0x2400 0x400>; + interrupts = <67 0x8>; + }; + + mdio@2800 { + compatible = "fsl,mpc5121-fec-mdio"; + reg = <0x2800 0x200>; + #address-cells = <1>; + #size-cells = <0>; + phy: ethernet-phy@0 { + compatible = "smsc,lan8700"; + reg = <0x1f>; + }; + }; + + eth0: ethernet@2800 { + compatible = "fsl,mpc5121-fec"; + reg = <0x2800 0x200>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <4 0x8>; + phy-handle = < &phy >; + }; + + // USB1 using external ULPI PHY + usb@3000 { + compatible = "fsl,mpc5121-usb2-dr"; + reg = <0x3000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <43 0x8>; + dr_mode = "host"; + phy_type = "ulpi"; + }; + + // USB0 using internal UTMI PHY + usb@4000 { + compatible = "fsl,mpc5121-usb2-dr"; + reg = <0x4000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <44 0x8>; + dr_mode = "otg"; + phy_type = "utmi_wide"; + fsl,invert-pwr-fault; + }; + + // IO control + ioctl@a000 { + compatible = "fsl,mpc5121-ioctl"; + reg = <0xA000 0x1000>; + }; + + // 512x PSCs are not 52xx PSCs compatible + serial@11000 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + cell-index = <0>; + reg = <0x11000 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + serial@11100 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + cell-index = <1>; + reg = <0x11100 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + serial@11200 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + cell-index = <2>; + reg = <0x11200 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + serial@11300 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + cell-index = <3>; + reg = <0x11300 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + serial@11400 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + cell-index = <4>; + reg = <0x11400 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + serial@11600 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + cell-index = <6>; + reg = <0x11600 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + serial@11800 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + cell-index = <8>; + reg = <0x11800 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + serial@11B00 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + cell-index = <11>; + reg = <0x11B00 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + pscfifo@11f00 { + compatible = "fsl,mpc5121-psc-fifo"; + reg = <0x11f00 0x100>; + interrupts = <40 0x8>; + }; + + spi@11900 { + compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc"; + cell-index = <9>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x11900 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + + // 7845 touch screen controller + ts@0 { + compatible = "ti,ads7846"; + reg = <0x0>; + spi-max-frequency = <3000000>; + // pen irq is GPIO25 + interrupts = <78 0x8>; + }; + }; + + dma@14000 { + compatible = "fsl,mpc5121-dma"; + reg = <0x14000 0x1800>; + interrupts = <65 0x8>; + }; + }; +}; diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig index e9dca280a4d..27b0651221d 100644 --- a/arch/powerpc/platforms/512x/Kconfig +++ b/arch/powerpc/platforms/512x/Kconfig @@ -25,3 +25,10 @@ config MPC5121_GENERIC Compatible boards include: Protonic LVT base boards (ZANMCU and VICVT2). + +config PDM360NG + bool "ifm PDM360NG board" + depends on PPC_MPC512x + select DEFAULT_UIMAGE + help + This option enables support for the PDM360NG board. diff --git a/arch/powerpc/platforms/512x/Makefile b/arch/powerpc/platforms/512x/Makefile index 90be2f5717e..4efc1c4b6fb 100644 --- a/arch/powerpc/platforms/512x/Makefile +++ b/arch/powerpc/platforms/512x/Makefile @@ -4,3 +4,4 @@ obj-y += clock.o mpc512x_shared.o obj-$(CONFIG_MPC5121_ADS) += mpc5121_ads.o mpc5121_ads_cpld.o obj-$(CONFIG_MPC5121_GENERIC) += mpc5121_generic.o +obj-$(CONFIG_PDM360NG) += pdm360ng.o diff --git a/arch/powerpc/platforms/512x/pdm360ng.c b/arch/powerpc/platforms/512x/pdm360ng.c new file mode 100644 index 00000000000..0575e858291 --- /dev/null +++ b/arch/powerpc/platforms/512x/pdm360ng.c @@ -0,0 +1,129 @@ +/* + * Copyright (C) 2010 DENX Software Engineering + * + * Anatolij Gustschin, + * + * PDM360NG board setup + * + * This is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include +#include +#include + +#include +#include + +#include "mpc512x.h" + +#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ + defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) +#include +#include +#include +#include + +static void *pdm360ng_gpio_base; + +static int pdm360ng_get_pendown_state(void) +{ + u32 reg; + + reg = in_be32(pdm360ng_gpio_base + 0xc); + if (reg & 0x40) + setbits32(pdm360ng_gpio_base + 0xc, 0x40); + + reg = in_be32(pdm360ng_gpio_base + 0x8); + + /* return 1 if pen is down */ + return (reg & 0x40) == 0; +} + +static struct ads7846_platform_data pdm360ng_ads7846_pdata = { + .model = 7845, + .get_pendown_state = pdm360ng_get_pendown_state, + .irq_flags = IRQF_TRIGGER_LOW, +}; + +static int __init pdm360ng_penirq_init(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-gpio"); + if (!np) { + pr_err("%s: Can't find 'mpc5121-gpio' node\n", __func__); + return -ENODEV; + } + + pdm360ng_gpio_base = of_iomap(np, 0); + of_node_put(np); + if (!pdm360ng_gpio_base) { + pr_err("%s: Can't map gpio regs.\n", __func__); + return -ENODEV; + } + out_be32(pdm360ng_gpio_base + 0xc, 0xffffffff); + setbits32(pdm360ng_gpio_base + 0x18, 0x2000); + setbits32(pdm360ng_gpio_base + 0x10, 0x40); + + return 0; +} + +static int pdm360ng_touchscreen_notifier_call(struct notifier_block *nb, + unsigned long event, void *__dev) +{ + struct device *dev = __dev; + + if ((event == BUS_NOTIFY_ADD_DEVICE) && + of_device_is_compatible(dev->of_node, "ti,ads7846")) { + dev->platform_data = &pdm360ng_ads7846_pdata; + return NOTIFY_OK; + } + return NOTIFY_DONE; +} + +static struct notifier_block pdm360ng_touchscreen_nb = { + .notifier_call = pdm360ng_touchscreen_notifier_call, +}; + +static void __init pdm360ng_touchscreen_init(void) +{ + if (pdm360ng_penirq_init()) + return; + + bus_register_notifier(&spi_bus_type, &pdm360ng_touchscreen_nb); +} +#else +static inline void __init pdm360ng_touchscreen_init(void) +{ +} +#endif /* CONFIG_TOUCHSCREEN_ADS7846 */ + +void __init pdm360ng_init(void) +{ + mpc512x_init(); + pdm360ng_touchscreen_init(); +} + +static int __init pdm360ng_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "ifm,pdm360ng"); +} + +define_machine(pdm360ng) { + .name = "PDM360NG", + .probe = pdm360ng_probe, + .setup_arch = mpc512x_setup_diu, + .init = pdm360ng_init, + .init_early = mpc512x_init_diu, + .init_IRQ = mpc512x_init_IRQ, + .get_irq = ipic_get_irq, + .calibrate_decr = generic_calibrate_decr, + .restart = mpc512x_restart, +}; -- cgit v1.2.3-18-g5258 From 9e2089cbed7441a21d72a510897f0336afb06492 Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Fri, 23 Jul 2010 03:50:18 +0000 Subject: powerpc/512x: add clock structure for Video-IN (VIU) unit Allows using clk_get()/clk_enable()/clk_disable() for VIU clock in the v4l2 video driver. Signed-off-by: Hongjun Chen Signed-off-by: Anatolij Gustschin Signed-off-by: Grant Likely --- arch/powerpc/platforms/512x/clock.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/512x/clock.c b/arch/powerpc/platforms/512x/clock.c index 4c42246b86a..e1c5cd6650b 100644 --- a/arch/powerpc/platforms/512x/clock.c +++ b/arch/powerpc/platforms/512x/clock.c @@ -292,6 +292,15 @@ static void diu_clk_calc(struct clk *clk) clk->rate = rate; } +static void viu_clk_calc(struct clk *clk) +{ + unsigned long rate; + + rate = sys_clk.rate; + rate /= 2; + clk->rate = rate; +} + static void half_clk_calc(struct clk *clk) { clk->rate = clk->parent->rate / 2; @@ -412,6 +421,14 @@ static struct clk diu_clk = { .calc = diu_clk_calc, }; +static struct clk viu_clk = { + .name = "viu_clk", + .flags = CLK_HAS_CTRL, + .reg = 1, + .bit = 18, + .calc = viu_clk_calc, +}; + static struct clk axe_clk = { .name = "axe_clk", .flags = CLK_HAS_CTRL, @@ -535,6 +552,7 @@ struct clk *rate_clks[] = { &ref_clk, &sys_clk, &diu_clk, + &viu_clk, &csb_clk, &e300_clk, &ips_clk, -- cgit v1.2.3-18-g5258 From 4b5006ec7bb73cd9d4c8a723d484b4c87fad4123 Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Fri, 23 Jul 2010 04:00:37 +0000 Subject: powerpc/5121: shared DIU framebuffer support MPC5121 DIU configuration/setup as initialized by the boot loader currently will get lost while booting Linux. As a result displaying the boot splash is not possible through the boot process. To prevent this we reserve configured DIU frame buffer address range while booting and preserve AOI descriptor and gamma table so that DIU continues displaying through the whole boot process. On first open from user space DIU frame buffer driver releases the reserved frame buffer area and continues to operate as usual. Signed-off-by: John Rigby Signed-off-by: Anatolij Gustschin Acked-by: Timur Tabi Signed-off-by: Grant Likely --- arch/powerpc/include/asm/mpc5121.h | 32 +++ arch/powerpc/platforms/512x/mpc5121_ads.c | 2 + arch/powerpc/platforms/512x/mpc5121_generic.c | 2 + arch/powerpc/platforms/512x/mpc512x.h | 2 + arch/powerpc/platforms/512x/mpc512x_shared.c | 284 ++++++++++++++++++++++++++ arch/powerpc/sysdev/fsl_soc.h | 1 + 6 files changed, 323 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/include/asm/mpc5121.h b/arch/powerpc/include/asm/mpc5121.h index e6a30bb1d16..8c0ab2ca689 100644 --- a/arch/powerpc/include/asm/mpc5121.h +++ b/arch/powerpc/include/asm/mpc5121.h @@ -21,4 +21,36 @@ struct mpc512x_reset_module { u32 rcer; /* Reset Control Enable Register */ }; +/* + * Clock Control Module + */ +struct mpc512x_ccm { + u32 spmr; /* System PLL Mode Register */ + u32 sccr1; /* System Clock Control Register 1 */ + u32 sccr2; /* System Clock Control Register 2 */ + u32 scfr1; /* System Clock Frequency Register 1 */ + u32 scfr2; /* System Clock Frequency Register 2 */ + u32 scfr2s; /* System Clock Frequency Shadow Register 2 */ + u32 bcr; /* Bread Crumb Register */ + u32 p0ccr; /* PSC0 Clock Control Register */ + u32 p1ccr; /* PSC1 CCR */ + u32 p2ccr; /* PSC2 CCR */ + u32 p3ccr; /* PSC3 CCR */ + u32 p4ccr; /* PSC4 CCR */ + u32 p5ccr; /* PSC5 CCR */ + u32 p6ccr; /* PSC6 CCR */ + u32 p7ccr; /* PSC7 CCR */ + u32 p8ccr; /* PSC8 CCR */ + u32 p9ccr; /* PSC9 CCR */ + u32 p10ccr; /* PSC10 CCR */ + u32 p11ccr; /* PSC11 CCR */ + u32 spccr; /* SPDIF Clock Control Register */ + u32 cccr; /* CFM Clock Control Register */ + u32 dccr; /* DIU Clock Control Register */ + u32 m1ccr; /* MSCAN1 CCR */ + u32 m2ccr; /* MSCAN2 CCR */ + u32 m3ccr; /* MSCAN3 CCR */ + u32 m4ccr; /* MSCAN4 CCR */ + u8 res[0x98]; /* Reserved */ +}; #endif /* __ASM_POWERPC_MPC5121_H__ */ diff --git a/arch/powerpc/platforms/512x/mpc5121_ads.c b/arch/powerpc/platforms/512x/mpc5121_ads.c index ee6ae129c25..dcef6ade48e 100644 --- a/arch/powerpc/platforms/512x/mpc5121_ads.c +++ b/arch/powerpc/platforms/512x/mpc5121_ads.c @@ -42,6 +42,7 @@ static void __init mpc5121_ads_setup_arch(void) for_each_compatible_node(np, "pci", "fsl,mpc5121-pci") mpc83xx_add_bridge(np); #endif + mpc512x_setup_diu(); } static void __init mpc5121_ads_init_IRQ(void) @@ -65,6 +66,7 @@ define_machine(mpc5121_ads) { .probe = mpc5121_ads_probe, .setup_arch = mpc5121_ads_setup_arch, .init = mpc512x_init, + .init_early = mpc512x_init_diu, .init_IRQ = mpc5121_ads_init_IRQ, .get_irq = ipic_get_irq, .calibrate_decr = generic_calibrate_decr, diff --git a/arch/powerpc/platforms/512x/mpc5121_generic.c b/arch/powerpc/platforms/512x/mpc5121_generic.c index a6c0e3a2615..e487eb06ec6 100644 --- a/arch/powerpc/platforms/512x/mpc5121_generic.c +++ b/arch/powerpc/platforms/512x/mpc5121_generic.c @@ -52,6 +52,8 @@ define_machine(mpc5121_generic) { .name = "MPC5121 generic", .probe = mpc5121_generic_probe, .init = mpc512x_init, + .init_early = mpc512x_init_diu, + .setup_arch = mpc512x_setup_diu, .init_IRQ = mpc512x_init_IRQ, .get_irq = ipic_get_irq, .calibrate_decr = generic_calibrate_decr, diff --git a/arch/powerpc/platforms/512x/mpc512x.h b/arch/powerpc/platforms/512x/mpc512x.h index b2daca0d148..1ab6d11d0b1 100644 --- a/arch/powerpc/platforms/512x/mpc512x.h +++ b/arch/powerpc/platforms/512x/mpc512x.h @@ -16,4 +16,6 @@ extern void __init mpc512x_init(void); extern int __init mpc5121_clk_init(void); void __init mpc512x_declare_of_platform_devices(void); extern void mpc512x_restart(char *cmd); +extern void mpc512x_init_diu(void); +extern void mpc512x_setup_diu(void); #endif /* __MPC512X_H__ */ diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c index 707e572b7c4..e41ebbdb3e1 100644 --- a/arch/powerpc/platforms/512x/mpc512x_shared.c +++ b/arch/powerpc/platforms/512x/mpc512x_shared.c @@ -16,7 +16,11 @@ #include #include #include +#include +#include +#include +#include #include #include #include @@ -54,6 +58,286 @@ void mpc512x_restart(char *cmd) ; } +struct fsl_diu_shared_fb { + u8 gamma[0x300]; /* 32-bit aligned! */ + struct diu_ad ad0; /* 32-bit aligned! */ + phys_addr_t fb_phys; + size_t fb_len; + bool in_use; +}; + +unsigned int mpc512x_get_pixel_format(unsigned int bits_per_pixel, + int monitor_port) +{ + switch (bits_per_pixel) { + case 32: + return 0x88883316; + case 24: + return 0x88082219; + case 16: + return 0x65053118; + } + return 0x00000400; +} + +void mpc512x_set_gamma_table(int monitor_port, char *gamma_table_base) +{ +} + +void mpc512x_set_monitor_port(int monitor_port) +{ +} + +#define DIU_DIV_MASK 0x000000ff +void mpc512x_set_pixel_clock(unsigned int pixclock) +{ + unsigned long bestval, bestfreq, speed, busfreq; + unsigned long minpixclock, maxpixclock, pixval; + struct mpc512x_ccm __iomem *ccm; + struct device_node *np; + u32 temp; + long err; + int i; + + np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-clock"); + if (!np) { + pr_err("Can't find clock control module.\n"); + return; + } + + ccm = of_iomap(np, 0); + of_node_put(np); + if (!ccm) { + pr_err("Can't map clock control module reg.\n"); + return; + } + + np = of_find_node_by_type(NULL, "cpu"); + if (np) { + const unsigned int *prop = + of_get_property(np, "bus-frequency", NULL); + + of_node_put(np); + if (prop) { + busfreq = *prop; + } else { + pr_err("Can't get bus-frequency property\n"); + return; + } + } else { + pr_err("Can't find 'cpu' node.\n"); + return; + } + + /* Pixel Clock configuration */ + pr_debug("DIU: Bus Frequency = %lu\n", busfreq); + speed = busfreq * 4; /* DIU_DIV ratio is 4 * CSB_CLK / DIU_CLK */ + + /* Calculate the pixel clock with the smallest error */ + /* calculate the following in steps to avoid overflow */ + pr_debug("DIU pixclock in ps - %d\n", pixclock); + temp = (1000000000 / pixclock) * 1000; + pixclock = temp; + pr_debug("DIU pixclock freq - %u\n", pixclock); + + temp = temp / 20; /* pixclock * 0.05 */ + pr_debug("deviation = %d\n", temp); + minpixclock = pixclock - temp; + maxpixclock = pixclock + temp; + pr_debug("DIU minpixclock - %lu\n", minpixclock); + pr_debug("DIU maxpixclock - %lu\n", maxpixclock); + pixval = speed/pixclock; + pr_debug("DIU pixval = %lu\n", pixval); + + err = LONG_MAX; + bestval = pixval; + pr_debug("DIU bestval = %lu\n", bestval); + + bestfreq = 0; + for (i = -1; i <= 1; i++) { + temp = speed / (pixval+i); + pr_debug("DIU test pixval i=%d, pixval=%lu, temp freq. = %u\n", + i, pixval, temp); + if ((temp < minpixclock) || (temp > maxpixclock)) + pr_debug("DIU exceeds monitor range (%lu to %lu)\n", + minpixclock, maxpixclock); + else if (abs(temp - pixclock) < err) { + pr_debug("Entered the else if block %d\n", i); + err = abs(temp - pixclock); + bestval = pixval + i; + bestfreq = temp; + } + } + + pr_debug("DIU chose = %lx\n", bestval); + pr_debug("DIU error = %ld\n NomPixClk ", err); + pr_debug("DIU: Best Freq = %lx\n", bestfreq); + /* Modify DIU_DIV in CCM SCFR1 */ + temp = in_be32(&ccm->scfr1); + pr_debug("DIU: Current value of SCFR1: 0x%08x\n", temp); + temp &= ~DIU_DIV_MASK; + temp |= (bestval & DIU_DIV_MASK); + out_be32(&ccm->scfr1, temp); + pr_debug("DIU: Modified value of SCFR1: 0x%08x\n", temp); + iounmap(ccm); +} + +ssize_t mpc512x_show_monitor_port(int monitor_port, char *buf) +{ + return sprintf(buf, "0 - 5121 LCD\n"); +} + +int mpc512x_set_sysfs_monitor_port(int val) +{ + return 0; +} + +static struct fsl_diu_shared_fb __attribute__ ((__aligned__(8))) diu_shared_fb; + +#if defined(CONFIG_FB_FSL_DIU) || \ + defined(CONFIG_FB_FSL_DIU_MODULE) +static inline void mpc512x_free_bootmem(struct page *page) +{ + __ClearPageReserved(page); + BUG_ON(PageTail(page)); + BUG_ON(atomic_read(&page->_count) > 1); + atomic_set(&page->_count, 1); + __free_page(page); + totalram_pages++; +} + +void mpc512x_release_bootmem(void) +{ + unsigned long addr = diu_shared_fb.fb_phys & PAGE_MASK; + unsigned long size = diu_shared_fb.fb_len; + unsigned long start, end; + + if (diu_shared_fb.in_use) { + start = PFN_UP(addr); + end = PFN_DOWN(addr + size); + + for (; start < end; start++) + mpc512x_free_bootmem(pfn_to_page(start)); + + diu_shared_fb.in_use = false; + } + diu_ops.release_bootmem = NULL; +} +#endif + +/* + * Check if DIU was pre-initialized. If so, perform steps + * needed to continue displaying through the whole boot process. + * Move area descriptor and gamma table elsewhere, they are + * destroyed by bootmem allocator otherwise. The frame buffer + * address range will be reserved in setup_arch() after bootmem + * allocator is up. + */ +void __init mpc512x_init_diu(void) +{ + struct device_node *np; + struct diu __iomem *diu_reg; + phys_addr_t desc; + void __iomem *vaddr; + unsigned long mode, pix_fmt, res, bpp; + unsigned long dst; + + np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-diu"); + if (!np) { + pr_err("No DIU node\n"); + return; + } + + diu_reg = of_iomap(np, 0); + of_node_put(np); + if (!diu_reg) { + pr_err("Can't map DIU\n"); + return; + } + + mode = in_be32(&diu_reg->diu_mode); + if (mode != MFB_MODE1) { + pr_info("%s: DIU OFF\n", __func__); + goto out; + } + + desc = in_be32(&diu_reg->desc[0]); + vaddr = ioremap(desc, sizeof(struct diu_ad)); + if (!vaddr) { + pr_err("Can't map DIU area desc.\n"); + goto out; + } + memcpy(&diu_shared_fb.ad0, vaddr, sizeof(struct diu_ad)); + /* flush fb area descriptor */ + dst = (unsigned long)&diu_shared_fb.ad0; + flush_dcache_range(dst, dst + sizeof(struct diu_ad) - 1); + + res = in_be32(&diu_reg->disp_size); + pix_fmt = in_le32(vaddr); + bpp = ((pix_fmt >> 16) & 0x3) + 1; + diu_shared_fb.fb_phys = in_le32(vaddr + 4); + diu_shared_fb.fb_len = ((res & 0xfff0000) >> 16) * (res & 0xfff) * bpp; + diu_shared_fb.in_use = true; + iounmap(vaddr); + + desc = in_be32(&diu_reg->gamma); + vaddr = ioremap(desc, sizeof(diu_shared_fb.gamma)); + if (!vaddr) { + pr_err("Can't map DIU area desc.\n"); + diu_shared_fb.in_use = false; + goto out; + } + memcpy(&diu_shared_fb.gamma, vaddr, sizeof(diu_shared_fb.gamma)); + /* flush gamma table */ + dst = (unsigned long)&diu_shared_fb.gamma; + flush_dcache_range(dst, dst + sizeof(diu_shared_fb.gamma) - 1); + + iounmap(vaddr); + out_be32(&diu_reg->gamma, virt_to_phys(&diu_shared_fb.gamma)); + out_be32(&diu_reg->desc[1], 0); + out_be32(&diu_reg->desc[2], 0); + out_be32(&diu_reg->desc[0], virt_to_phys(&diu_shared_fb.ad0)); + +out: + iounmap(diu_reg); +} + +void __init mpc512x_setup_diu(void) +{ + int ret; + + /* + * We do not allocate and configure new area for bitmap buffer + * because it would requere copying bitmap data (splash image) + * and so negatively affect boot time. Instead we reserve the + * already configured frame buffer area so that it won't be + * destroyed. The starting address of the area to reserve and + * also it's length is passed to reserve_bootmem(). It will be + * freed later on first open of fbdev, when splash image is not + * needed any more. + */ + if (diu_shared_fb.in_use) { + ret = reserve_bootmem(diu_shared_fb.fb_phys, + diu_shared_fb.fb_len, + BOOTMEM_EXCLUSIVE); + if (ret) { + pr_err("%s: reserve bootmem failed\n", __func__); + diu_shared_fb.in_use = false; + } + } + +#if defined(CONFIG_FB_FSL_DIU) || \ + defined(CONFIG_FB_FSL_DIU_MODULE) + diu_ops.get_pixel_format = mpc512x_get_pixel_format; + diu_ops.set_gamma_table = mpc512x_set_gamma_table; + diu_ops.set_monitor_port = mpc512x_set_monitor_port; + diu_ops.set_pixel_clock = mpc512x_set_pixel_clock; + diu_ops.show_monitor_port = mpc512x_show_monitor_port; + diu_ops.set_sysfs_monitor_port = mpc512x_set_sysfs_monitor_port; + diu_ops.release_bootmem = mpc512x_release_bootmem; +#endif +} + void __init mpc512x_init_IRQ(void) { struct device_node *np; diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h index 42381bb6cd5..53609489a62 100644 --- a/arch/powerpc/sysdev/fsl_soc.h +++ b/arch/powerpc/sysdev/fsl_soc.h @@ -30,6 +30,7 @@ struct platform_diu_data_ops { void (*set_pixel_clock) (unsigned int pixclock); ssize_t (*show_monitor_port) (int monitor_port, char *buf); int (*set_sysfs_monitor_port) (int val); + void (*release_bootmem) (void); }; extern struct platform_diu_data_ops diu_ops; -- cgit v1.2.3-18-g5258 From f933a41e419a954ef90605224e02c3ded78f3372 Mon Sep 17 00:00:00 2001 From: Matthew McClintock Date: Wed, 21 Jul 2010 16:14:53 -0500 Subject: powerpc/85xx: kexec for SMP 85xx BookE systems Adds support for kexec on 85xx machines for the BookE platform. Including support for SMP machines Based off work from Maxim Uvarov Signed-off-by: Matthew McClintock Signed-off-by: Kumar Gala --- arch/powerpc/Kconfig | 10 +++---- arch/powerpc/platforms/85xx/smp.c | 63 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 68 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 4fa42038104..0e3fd3a489d 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -352,7 +352,7 @@ config ARCH_ENABLE_MEMORY_HOTREMOVE config KEXEC bool "kexec system call (EXPERIMENTAL)" - depends on (PPC_BOOK3S || (FSL_BOOKE && !SMP)) && EXPERIMENTAL + depends on (PPC_BOOK3S || FSL_BOOKE) && EXPERIMENTAL help kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot @@ -369,8 +369,8 @@ config KEXEC config CRASH_DUMP bool "Build a kdump crash kernel" - depends on PPC64 || 6xx - select RELOCATABLE if PPC64 + depends on PPC64 || 6xx || FSL_BOOKE + select RELOCATABLE if PPC64 || FSL_BOOKE help Build a kernel suitable for use as a kdump capture kernel. The same kernel binary can be used as production kernel and dump @@ -898,7 +898,7 @@ config KERNEL_START_BOOL config KERNEL_START hex "Virtual address of kernel base" if KERNEL_START_BOOL default PAGE_OFFSET if PAGE_OFFSET_BOOL - default "0xc2000000" if CRASH_DUMP + default "0xc2000000" if CRASH_DUMP && !RELOCATABLE default "0xc0000000" config PHYSICAL_START_BOOL @@ -911,7 +911,7 @@ config PHYSICAL_START_BOOL config PHYSICAL_START hex "Physical address where the kernel is loaded" if PHYSICAL_START_BOOL - default "0x02000000" if PPC_STD_MMU && CRASH_DUMP + default "0x02000000" if PPC_STD_MMU && CRASH_DUMP && !RELOCATABLE default "0x00000000" config PHYSICAL_ALIGN diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c index 4c3cde911c7..a6b106557be 100644 --- a/arch/powerpc/platforms/85xx/smp.c +++ b/arch/powerpc/platforms/85xx/smp.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include @@ -24,6 +25,7 @@ #include #include +#include extern void __early_start(void); @@ -105,8 +107,64 @@ smp_85xx_setup_cpu(int cpu_nr) struct smp_ops_t smp_85xx_ops = { .kick_cpu = smp_85xx_kick_cpu, +#ifdef CONFIG_KEXEC + .give_timebase = smp_generic_give_timebase, + .take_timebase = smp_generic_take_timebase, +#endif }; +#ifdef CONFIG_KEXEC +static int kexec_down_cpus = 0; + +void mpc85xx_smp_kexec_cpu_down(int crash_shutdown, int secondary) +{ + mpic_teardown_this_cpu(1); + + /* When crashing, this gets called on all CPU's we only + * take down the non-boot cpus */ + if (smp_processor_id() != boot_cpuid) + { + local_irq_disable(); + kexec_down_cpus++; + + while (1); + } +} + +static void mpc85xx_smp_kexec_down(void *arg) +{ + if (ppc_md.kexec_cpu_down) + ppc_md.kexec_cpu_down(0,1); +} + +static void mpc85xx_smp_machine_kexec(struct kimage *image) +{ + int timeout = 2000; + int i; + + set_cpus_allowed(current, cpumask_of_cpu(boot_cpuid)); + + smp_call_function(mpc85xx_smp_kexec_down, NULL, 0); + + while ( (kexec_down_cpus != (num_online_cpus() - 1)) && + ( timeout > 0 ) ) + { + timeout--; + } + + if ( !timeout ) + printk(KERN_ERR "Unable to bring down secondary cpu(s)"); + + for (i = 0; i < num_present_cpus(); i++) + { + if ( i == smp_processor_id() ) continue; + mpic_reset_core(i); + } + + default_machine_kexec(image); +} +#endif /* CONFIG_KEXEC */ + void __init mpc85xx_smp_init(void) { struct device_node *np; @@ -124,4 +182,9 @@ void __init mpc85xx_smp_init(void) BUG_ON(!smp_85xx_ops.message_pass); smp_ops = &smp_85xx_ops; + +#ifdef CONFIG_KEXEC + ppc_md.kexec_cpu_down = mpc85xx_smp_kexec_cpu_down; + ppc_md.machine_kexec = mpc85xx_smp_machine_kexec; +#endif } -- cgit v1.2.3-18-g5258 From bb863e85a74f0222f4486ddb1945ed9eb431d6c9 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Tue, 8 Jun 2010 09:55:40 +0000 Subject: powerpc/85xx: Fix SWIOTLB initalization for MPC85xxMDS boards The code inside '#ifdef CONFIG_QUICC_ENGINE' makes the mpc85xx_mds_setup_arch() return early if no QE nodes present, and so SWIOTLB is never initialized. This patch fixes the issue by moving SWIOTLB code above QE. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- arch/powerpc/platforms/85xx/mpc85xx_mds.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index 8fe87fc6148..35ab2b42d69 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -202,6 +202,14 @@ static void __init mpc85xx_mds_setup_arch(void) mpc85xx_smp_init(); #endif +#ifdef CONFIG_SWIOTLB + if (lmb_end_of_DRAM() > max) { + ppc_swiotlb_enable = 1; + set_pci_dma_ops(&swiotlb_dma_ops); + ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb; + } +#endif + #ifdef CONFIG_QUICC_ENGINE np = of_find_compatible_node(NULL, NULL, "fsl,qe"); if (!np) { @@ -323,14 +331,6 @@ static void __init mpc85xx_mds_setup_arch(void) } #endif /* CONFIG_QUICC_ENGINE */ - -#ifdef CONFIG_SWIOTLB - if (lmb_end_of_DRAM() > max) { - ppc_swiotlb_enable = 1; - set_pci_dma_ops(&swiotlb_dma_ops); - ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb; - } -#endif } -- cgit v1.2.3-18-g5258 From dee9ad718b4f0009a4170c178f7171c7b1f06f92 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Tue, 8 Jun 2010 09:55:50 +0000 Subject: powerpc/85xx: Fix booting for P1021MDS boards P1021 processors have no dedicated ROM to store the QE microcode, so the fimrware is stored externally, and it is U-Boot responsibility to load it. It might be that the board is booting without QE, e.g. currently U-Boot doesn't support QE for P1021MDS boards, which means that QE isn't initialized, and so the board hangs early at boot. This patch fixes the issue by marking QE as disabled and checking the state in the probing code. U-Boot should fixup the state if it initialized the QE. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/p1021mds.dts | 1 + arch/powerpc/platforms/85xx/mpc85xx_mds.c | 43 ++++++++++++++++++++++++++----- 2 files changed, 38 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/p1021mds.dts b/arch/powerpc/boot/dts/p1021mds.dts index 7fad2df2598..ad5b8526900 100644 --- a/arch/powerpc/boot/dts/p1021mds.dts +++ b/arch/powerpc/boot/dts/p1021mds.dts @@ -617,6 +617,7 @@ bus-frequency = <0>; fsl,qe-num-riscs = <1>; fsl,qe-num-snums = <28>; + status = "disabled"; /* no firmware loaded */ qeic: interrupt-controller@80 { interrupt-controller; diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index 35ab2b42d69..9dadcffd994 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -158,6 +158,29 @@ static int mpc8568_mds_phy_fixups(struct phy_device *phydev) extern void __init mpc85xx_smp_init(void); #endif +#ifdef CONFIG_QUICC_ENGINE +static struct of_device_id mpc85xx_qe_ids[] __initdata = { + { .type = "qe", }, + { .compatible = "fsl,qe", }, + { }, +}; + +static void __init mpc85xx_publish_qe_devices(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "fsl,qe"); + if (!of_device_is_available(np)) { + of_node_put(np); + return; + } + + of_platform_bus_probe(NULL, mpc85xx_qe_ids, NULL); +} +#else +static void __init mpc85xx_publish_qe_devices(void) { } +#endif /* CONFIG_QUICC_ENGINE */ + static void __init mpc85xx_mds_setup_arch(void) { struct device_node *np; @@ -218,6 +241,11 @@ static void __init mpc85xx_mds_setup_arch(void) return; } + if (!of_device_is_available(np)) { + of_node_put(np); + return; + } + qe_reset(); of_node_put(np); @@ -369,8 +397,6 @@ static struct of_device_id mpc85xx_ids[] = { { .type = "soc", }, { .compatible = "soc", }, { .compatible = "simple-bus", }, - { .type = "qe", }, - { .compatible = "fsl,qe", }, { .compatible = "gianfar", }, { .compatible = "fsl,rapidio-delta", }, { .compatible = "fsl,mpc8548-guts", }, @@ -382,8 +408,6 @@ static struct of_device_id p1021_ids[] = { { .type = "soc", }, { .compatible = "soc", }, { .compatible = "simple-bus", }, - { .type = "qe", }, - { .compatible = "fsl,qe", }, { .compatible = "gianfar", }, {}, }; @@ -395,16 +419,16 @@ static int __init mpc85xx_publish_devices(void) if (machine_is(mpc8569_mds)) simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio"); - /* Publish the QE devices */ of_platform_bus_probe(NULL, mpc85xx_ids, NULL); + mpc85xx_publish_qe_devices(); return 0; } static int __init p1021_publish_devices(void) { - /* Publish the QE devices */ of_platform_bus_probe(NULL, p1021_ids, NULL); + mpc85xx_publish_qe_devices(); return 0; } @@ -443,12 +467,19 @@ static void __init mpc85xx_mds_pic_init(void) mpic_init(mpic); #ifdef CONFIG_QUICC_ENGINE + np = of_find_compatible_node(NULL, NULL, "fsl,qe"); + if (!of_device_is_available(np)) { + of_node_put(np); + return; + } + np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic"); if (!np) { np = of_find_node_by_type(NULL, "qeic"); if (!np) return; } + if (machine_is(p1021_mds)) qe_ic_init(np, 0, qe_ic_cascade_low_mpic, qe_ic_cascade_high_mpic); -- cgit v1.2.3-18-g5258 From 99d8238f5fb1dfe225042aea708337fcb7e8de55 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Tue, 8 Jun 2010 09:55:57 +0000 Subject: powerpc/85xx: Cleanup QE initialization for MPC85xxMDS boards The mpc85xx_mds_setup_arch() function is incomprehensible and unmaintainable. Factor out all QE specific stuff into mpc85xx_mds_qe_init() and mpc85xx_mds_reset_ucc_phys(). Also move QE stuff out of mpc85xx_mds_pic_init(). The diff is unreadable, but only because the code was so. ;-) It should be better now, and less indented. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- arch/powerpc/platforms/85xx/mpc85xx_mds.c | 272 ++++++++++++++++-------------- 1 file changed, 143 insertions(+), 129 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index 9dadcffd994..c8be7b528bb 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -177,63 +177,89 @@ static void __init mpc85xx_publish_qe_devices(void) of_platform_bus_probe(NULL, mpc85xx_qe_ids, NULL); } -#else -static void __init mpc85xx_publish_qe_devices(void) { } -#endif /* CONFIG_QUICC_ENGINE */ -static void __init mpc85xx_mds_setup_arch(void) +static void __init mpc85xx_mds_reset_ucc_phys(void) { struct device_node *np; - static u8 __iomem *bcsr_regs = NULL; -#ifdef CONFIG_PCI - struct pci_controller *hose; -#endif - dma_addr_t max = 0xffffffff; - - if (ppc_md.progress) - ppc_md.progress("mpc85xx_mds_setup_arch()", 0); + static u8 __iomem *bcsr_regs; /* Map BCSR area */ np = of_find_node_by_name(NULL, "bcsr"); - if (np != NULL) { - struct resource res; + if (!np) + return; - of_address_to_resource(np, 0, &res); - bcsr_regs = ioremap(res.start, res.end - res.start +1); - of_node_put(np); - } + bcsr_regs = of_iomap(np, 0); + of_node_put(np); + if (!bcsr_regs) + return; -#ifdef CONFIG_PCI - for_each_node_by_type(np, "pci") { - if (of_device_is_compatible(np, "fsl,mpc8540-pci") || - of_device_is_compatible(np, "fsl,mpc8548-pcie")) { - struct resource rsrc; - of_address_to_resource(np, 0, &rsrc); - if ((rsrc.start & 0xfffff) == 0x8000) - fsl_add_bridge(np, 1); - else - fsl_add_bridge(np, 0); + if (machine_is(mpc8568_mds)) { +#define BCSR_UCC1_GETH_EN (0x1 << 7) +#define BCSR_UCC2_GETH_EN (0x1 << 7) +#define BCSR_UCC1_MODE_MSK (0x3 << 4) +#define BCSR_UCC2_MODE_MSK (0x3 << 0) - hose = pci_find_hose_for_OF_device(np); - max = min(max, hose->dma_window_base_cur + - hose->dma_window_size); + /* Turn off UCC1 & UCC2 */ + clrbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN); + clrbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN); + + /* Mode is RGMII, all bits clear */ + clrbits8(&bcsr_regs[11], BCSR_UCC1_MODE_MSK | + BCSR_UCC2_MODE_MSK); + + /* Turn UCC1 & UCC2 on */ + setbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN); + setbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN); + } else if (machine_is(mpc8569_mds)) { +#define BCSR7_UCC12_GETHnRST (0x1 << 2) +#define BCSR8_UEM_MARVELL_RST (0x1 << 1) +#define BCSR_UCC_RGMII (0x1 << 6) +#define BCSR_UCC_RTBI (0x1 << 5) + /* + * U-Boot mangles interrupt polarity for Marvell PHYs, + * so reset built-in and UEM Marvell PHYs, this puts + * the PHYs into their normal state. + */ + clrbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST); + setbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST); + + setbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST); + clrbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST); + + for (np = NULL; (np = of_find_compatible_node(np, + "network", + "ucc_geth")) != NULL;) { + const unsigned int *prop; + int ucc_num; + + prop = of_get_property(np, "cell-index", NULL); + if (prop == NULL) + continue; + + ucc_num = *prop - 1; + + prop = of_get_property(np, "phy-connection-type", NULL); + if (prop == NULL) + continue; + + if (strcmp("rtbi", (const char *)prop) == 0) + clrsetbits_8(&bcsr_regs[7 + ucc_num], + BCSR_UCC_RGMII, BCSR_UCC_RTBI); } + } else if (machine_is(p1021_mds)) { +#define BCSR11_ENET_MICRST (0x1 << 5) + /* Reset Micrel PHY */ + clrbits8(&bcsr_regs[11], BCSR11_ENET_MICRST); + setbits8(&bcsr_regs[11], BCSR11_ENET_MICRST); } -#endif -#ifdef CONFIG_SMP - mpc85xx_smp_init(); -#endif + iounmap(bcsr_regs); +} -#ifdef CONFIG_SWIOTLB - if (lmb_end_of_DRAM() > max) { - ppc_swiotlb_enable = 1; - set_pci_dma_ops(&swiotlb_dma_ops); - ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb; - } -#endif +static void __init mpc85xx_mds_qe_init(void) +{ + struct device_node *np; -#ifdef CONFIG_QUICC_ENGINE np = of_find_compatible_node(NULL, NULL, "fsl,qe"); if (!np) { np = of_find_node_by_name(NULL, "qe"); @@ -260,70 +286,7 @@ static void __init mpc85xx_mds_setup_arch(void) par_io_of_config(ucc); } - if (bcsr_regs) { - if (machine_is(mpc8568_mds)) { -#define BCSR_UCC1_GETH_EN (0x1 << 7) -#define BCSR_UCC2_GETH_EN (0x1 << 7) -#define BCSR_UCC1_MODE_MSK (0x3 << 4) -#define BCSR_UCC2_MODE_MSK (0x3 << 0) - - /* Turn off UCC1 & UCC2 */ - clrbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN); - clrbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN); - - /* Mode is RGMII, all bits clear */ - clrbits8(&bcsr_regs[11], BCSR_UCC1_MODE_MSK | - BCSR_UCC2_MODE_MSK); - - /* Turn UCC1 & UCC2 on */ - setbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN); - setbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN); - } else if (machine_is(mpc8569_mds)) { -#define BCSR7_UCC12_GETHnRST (0x1 << 2) -#define BCSR8_UEM_MARVELL_RST (0x1 << 1) -#define BCSR_UCC_RGMII (0x1 << 6) -#define BCSR_UCC_RTBI (0x1 << 5) - /* - * U-Boot mangles interrupt polarity for Marvell PHYs, - * so reset built-in and UEM Marvell PHYs, this puts - * the PHYs into their normal state. - */ - clrbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST); - setbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST); - - setbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST); - clrbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST); - - for (np = NULL; (np = of_find_compatible_node(np, - "network", - "ucc_geth")) != NULL;) { - const unsigned int *prop; - int ucc_num; - - prop = of_get_property(np, "cell-index", NULL); - if (prop == NULL) - continue; - - ucc_num = *prop - 1; - - prop = of_get_property(np, "phy-connection-type", NULL); - if (prop == NULL) - continue; - - if (strcmp("rtbi", (const char *)prop) == 0) - clrsetbits_8(&bcsr_regs[7 + ucc_num], - BCSR_UCC_RGMII, BCSR_UCC_RTBI); - } - - } else if (machine_is(p1021_mds)) { -#define BCSR11_ENET_MICRST (0x1 << 5) - /* Reset Micrel PHY */ - clrbits8(&bcsr_regs[11], BCSR11_ENET_MICRST); - setbits8(&bcsr_regs[11], BCSR11_ENET_MICRST); - } - - iounmap(bcsr_regs); - } + mpc85xx_mds_reset_ucc_phys(); if (machine_is(p1021_mds)) { #define MPC85xx_PMUXCR_OFFSET 0x60 @@ -358,7 +321,79 @@ static void __init mpc85xx_mds_setup_arch(void) } } +} + +static void __init mpc85xx_mds_qeic_init(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "fsl,qe"); + if (!of_device_is_available(np)) { + of_node_put(np); + return; + } + + np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic"); + if (!np) { + np = of_find_node_by_type(NULL, "qeic"); + if (!np) + return; + } + + if (machine_is(p1021_mds)) + qe_ic_init(np, 0, qe_ic_cascade_low_mpic, + qe_ic_cascade_high_mpic); + else + qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL); + of_node_put(np); +} +#else +static void __init mpc85xx_publish_qe_devices(void) { } +static void __init mpc85xx_mds_qe_init(void) { } +static void __init mpc85xx_mds_qeic_init(void) { } #endif /* CONFIG_QUICC_ENGINE */ + +static void __init mpc85xx_mds_setup_arch(void) +{ +#ifdef CONFIG_PCI + struct pci_controller *hose; +#endif + dma_addr_t max = 0xffffffff; + + if (ppc_md.progress) + ppc_md.progress("mpc85xx_mds_setup_arch()", 0); + +#ifdef CONFIG_PCI + for_each_node_by_type(np, "pci") { + if (of_device_is_compatible(np, "fsl,mpc8540-pci") || + of_device_is_compatible(np, "fsl,mpc8548-pcie")) { + struct resource rsrc; + of_address_to_resource(np, 0, &rsrc); + if ((rsrc.start & 0xfffff) == 0x8000) + fsl_add_bridge(np, 1); + else + fsl_add_bridge(np, 0); + + hose = pci_find_hose_for_OF_device(np); + max = min(max, hose->dma_window_base_cur + + hose->dma_window_size); + } + } +#endif + +#ifdef CONFIG_SMP + mpc85xx_smp_init(); +#endif + + mpc85xx_mds_qe_init(); + +#ifdef CONFIG_SWIOTLB + if (lmb_end_of_DRAM() > max) { + ppc_swiotlb_enable = 1; + set_pci_dma_ops(&swiotlb_dma_ops); + ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb; + } +#endif } @@ -465,28 +500,7 @@ static void __init mpc85xx_mds_pic_init(void) of_node_put(np); mpic_init(mpic); - -#ifdef CONFIG_QUICC_ENGINE - np = of_find_compatible_node(NULL, NULL, "fsl,qe"); - if (!of_device_is_available(np)) { - of_node_put(np); - return; - } - - np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic"); - if (!np) { - np = of_find_node_by_type(NULL, "qeic"); - if (!np) - return; - } - - if (machine_is(p1021_mds)) - qe_ic_init(np, 0, qe_ic_cascade_low_mpic, - qe_ic_cascade_high_mpic); - else - qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL); - of_node_put(np); -#endif /* CONFIG_QUICC_ENGINE */ + mpc85xx_mds_qeic_init(); } static int __init mpc85xx_mds_probe(void) -- cgit v1.2.3-18-g5258 From e3b5e0d552b34d65e15b20610273b200555eea53 Mon Sep 17 00:00:00 2001 From: Ilya Yanok Date: Thu, 8 Jul 2010 10:10:38 +0000 Subject: powerpc/fsl_pci: add quirk for mpc8308 pcie bridge This patch adds the quirk for PCIE controller found on Freescale MPC8308. The quirk is the same as for other MPC83xx processors. Signed-off-by: Ilya Yanok Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/fsl_pci.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index a14760fe513..7e900ec988f 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -412,6 +412,7 @@ DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4080, quirk_fsl_pcie_header); #endif /* CONFIG_FSL_SOC_BOOKE || CONFIG_PPC_86xx */ #if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x) +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8308, quirk_fsl_pcie_header); DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8314E, quirk_fsl_pcie_header); DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8314, quirk_fsl_pcie_header); DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8315E, quirk_fsl_pcie_header); -- cgit v1.2.3-18-g5258 From ba4d1275d1ad89a17cd529f7755e227ead52be4e Mon Sep 17 00:00:00 2001 From: Ilya Yanok Date: Thu, 8 Jul 2010 10:10:39 +0000 Subject: powerpc/mpc8308rdb: support for MPC8308RDB board from Freescale This patch adds support for MPC8308RDB development board from Freescale. Supported devices: DUART Dual Ethernet NOR and NAND flashes I2C USB in peripheral mode PCIE support is broken by the commit 3da34aa ("powerpc/fsl: Support unique MSI addresses per PCIe Root Complex"). Works after revert. Signed-off-by: Ilya Yanok Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8308rdb.dts | 303 ++++++++++++++++++++++++++++++ arch/powerpc/platforms/83xx/Kconfig | 8 + arch/powerpc/platforms/83xx/Makefile | 1 + arch/powerpc/platforms/83xx/mpc830x_rdb.c | 94 +++++++++ 4 files changed, 406 insertions(+) create mode 100644 arch/powerpc/boot/dts/mpc8308rdb.dts create mode 100644 arch/powerpc/platforms/83xx/mpc830x_rdb.c (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc8308rdb.dts b/arch/powerpc/boot/dts/mpc8308rdb.dts new file mode 100644 index 00000000000..a97eb2db5a1 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8308rdb.dts @@ -0,0 +1,303 @@ +/* + * MPC8308RDB Device Tree Source + * + * Copyright 2009 Freescale Semiconductor Inc. + * Copyright 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + compatible = "fsl,mpc8308rdb"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8308@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <16384>; + i-cache-size = <16384>; + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x08000000>; // 128MB at 0 + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + + // CS0 and CS1 are swapped when + // booting from nand, but the + // addresses are the same. + ranges = <0x0 0x0 0xfe000000 0x00800000 + 0x1 0x0 0xe0600000 0x00002000 + 0x2 0x0 0xf0000000 0x00020000 + 0x3 0x0 0xfa000000 0x00008000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x800000>; + bank-width = <2>; + device-width = <1>; + + u-boot@0 { + reg = <0x0 0x60000>; + read-only; + }; + env@60000 { + reg = <0x60000 0x10000>; + }; + env1@70000 { + reg = <0x70000 0x10000>; + }; + kernel@80000 { + reg = <0x80000 0x200000>; + }; + dtb@280000 { + reg = <0x280000 0x10000>; + }; + ramdisk@290000 { + reg = <0x290000 0x570000>; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8315-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x2000>; + + jffs2@0 { + reg = <0x0 0x2000000>; + }; + }; + }; + + immr@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8315-immr", "simple-bus"; + ranges = <0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; + dr_mode = "peripheral"; + phy_type = "ulpi"; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x24000 0x1000>; + + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + interrupt-parent = <&ipic>; + tbi-handle = < &tbi0 >; + phy-handle = < &phy2 >; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + phy2: ethernet-phy@2 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x2>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 0x8 36 0x8 37 0x8>; + interrupt-parent = <&ipic>; + tbi-handle = < &tbi1 >; + /* Vitesse 7385 isn't on the MDIO bus */ + fixed-link = <1 1 1000 0 0>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <133333333>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <133333333>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + gpio@c00 { + #gpio-cells = <2>; + device_type = "gpio"; + compatible = "fsl,mpc8308-gpio", "fsl,mpc8349-gpio"; + reg = <0xc00 0x18>; + interrupts = <74 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + /* IPIC + * interrupts cell = + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: interrupt-controller@700 { + compatible = "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + device_type = "ipic"; + }; + + ipic-msi@7c0 { + compatible = "fsl,ipic-msi"; + reg = <0x7c0 0x40>; + msi-available-ranges = <0x0 0x100>; + interrupts = < 0x43 0x8 + 0x4 0x8 + 0x51 0x8 + 0x52 0x8 + 0x56 0x8 + 0x57 0x8 + 0x58 0x8 + 0x59 0x8 >; + interrupt-parent = < &ipic >; + }; + + }; + + pci0: pcie@e0009000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8308-pcie", "fsl,mpc8314-pcie"; + reg = <0xe0009000 0x00001000 + 0xb0000000 0x01000000>; + ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb1000000 0 0x00800000>; + bus-range = <0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 1 8 + 0 0 0 2 &ipic 1 8 + 0 0 0 3 &ipic 1 8 + 0 0 0 4 &ipic 1 8>; + interrupts = <0x1 0x8>; + interrupt-parent = <&ipic>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xa0000000 + 0x02000000 0 0xa0000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; +}; diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index f49a2548c5f..021763a32c2 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -9,6 +9,14 @@ menuconfig PPC_83xx if PPC_83xx +config MPC830x_RDB + bool "Freescale MPC830x RDB" + select DEFAULT_UIMAGE + select PPC_MPC831x + select FSL_GTM + help + This option enables support for the MPC8308 RDB board. + config MPC831x_RDB bool "Freescale MPC831x RDB" select DEFAULT_UIMAGE diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile index e139c36572e..6e8bbbbcfdf 100644 --- a/arch/powerpc/platforms/83xx/Makefile +++ b/arch/powerpc/platforms/83xx/Makefile @@ -4,6 +4,7 @@ obj-y := misc.o usb.o obj-$(CONFIG_SUSPEND) += suspend.o suspend-asm.o obj-$(CONFIG_MCU_MPC8349EMITX) += mcu_mpc8349emitx.o +obj-$(CONFIG_MPC830x_RDB) += mpc830x_rdb.o obj-$(CONFIG_MPC831x_RDB) += mpc831x_rdb.o obj-$(CONFIG_MPC832x_RDB) += mpc832x_rdb.o obj-$(CONFIG_MPC834x_MDS) += mpc834x_mds.o diff --git a/arch/powerpc/platforms/83xx/mpc830x_rdb.c b/arch/powerpc/platforms/83xx/mpc830x_rdb.c new file mode 100644 index 00000000000..ac102ee9abe --- /dev/null +++ b/arch/powerpc/platforms/83xx/mpc830x_rdb.c @@ -0,0 +1,94 @@ +/* + * arch/powerpc/platforms/83xx/mpc830x_rdb.c + * + * Description: MPC830x RDB board specific routines. + * This file is based on mpc831x_rdb.c + * + * Copyright (C) Freescale Semiconductor, Inc. 2009. All rights reserved. + * Copyright (C) 2010. Ilya Yanok, Emcraft Systems, yanok@emcraft.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include "mpc83xx.h" + +/* + * Setup the architecture + */ +static void __init mpc830x_rdb_setup_arch(void) +{ +#ifdef CONFIG_PCI + struct device_node *np; +#endif + + if (ppc_md.progress) + ppc_md.progress("mpc830x_rdb_setup_arch()", 0); + +#ifdef CONFIG_PCI + for_each_compatible_node(np, "pci", "fsl,mpc8308-pcie") + mpc83xx_add_bridge(np); +#endif + mpc831x_usb_cfg(); +} + +static void __init mpc830x_rdb_init_IRQ(void) +{ + struct device_node *np; + + np = of_find_node_by_type(NULL, "ipic"); + if (!np) + return; + + ipic_init(np, 0); + + /* Initialize the default interrupt mapping priorities, + * in case the boot rom changed something on us. + */ + ipic_set_default_priority(); +} + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init mpc830x_rdb_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "MPC8308RDB") || + of_flat_dt_is_compatible(root, "fsl,mpc8308rdb"); +} + +static struct of_device_id __initdata of_bus_ids[] = { + { .compatible = "simple-bus" }, + { .compatible = "gianfar" }, + {}, +}; + +static int __init declare_of_platform_devices(void) +{ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + return 0; +} +machine_device_initcall(mpc830x_rdb, declare_of_platform_devices); + +define_machine(mpc830x_rdb) { + .name = "MPC830x RDB", + .probe = mpc830x_rdb_probe, + .setup_arch = mpc830x_rdb_setup_arch, + .init_IRQ = mpc830x_rdb_init_IRQ, + .get_irq = ipic_get_irq, + .restart = mpc83xx_restart, + .time_init = mpc83xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; -- cgit v1.2.3-18-g5258 From 07c638398f490e63275ae23aa51b7c50df7d1a49 Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Wed, 21 Jul 2010 10:33:23 +0000 Subject: powerpc/tqm85xx: update PCI interrupt-map attribute Update PCI IRQ mapping on TQM85xx platforms: include INTC and INTD on PCI-X slot and add INTA/INTB mapping for PCMCIA bridge. Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/tqm8540.dts | 9 ++++++++- arch/powerpc/boot/dts/tqm8541.dts | 9 ++++++++- arch/powerpc/boot/dts/tqm8548-bigflash.dts | 9 ++++++++- arch/powerpc/boot/dts/tqm8548.dts | 9 ++++++++- arch/powerpc/boot/dts/tqm8555.dts | 9 ++++++++- arch/powerpc/boot/dts/tqm8560.dts | 9 ++++++++- 6 files changed, 48 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/tqm8540.dts b/arch/powerpc/boot/dts/tqm8540.dts index 71347537b83..15ca731bc24 100644 --- a/arch/powerpc/boot/dts/tqm8540.dts +++ b/arch/powerpc/boot/dts/tqm8540.dts @@ -289,7 +289,14 @@ interrupt-map = < /* IDSEL 28 */ 0xe000 0 0 1 &mpic 2 1 - 0xe000 0 0 2 &mpic 3 1>; + 0xe000 0 0 2 &mpic 3 1 + 0xe000 0 0 3 &mpic 6 1 + 0xe000 0 0 4 &mpic 5 1 + + /* IDSEL 11 */ + 0x5800 0 0 1 &mpic 6 1 + 0x5800 0 0 2 &mpic 5 1 + >; interrupt-parent = <&mpic>; interrupts = <24 2>; diff --git a/arch/powerpc/boot/dts/tqm8541.dts b/arch/powerpc/boot/dts/tqm8541.dts index b30f63753d4..f49d0918131 100644 --- a/arch/powerpc/boot/dts/tqm8541.dts +++ b/arch/powerpc/boot/dts/tqm8541.dts @@ -311,7 +311,14 @@ interrupt-map = < /* IDSEL 28 */ 0xe000 0 0 1 &mpic 2 1 - 0xe000 0 0 2 &mpic 3 1>; + 0xe000 0 0 2 &mpic 3 1 + 0xe000 0 0 3 &mpic 6 1 + 0xe000 0 0 4 &mpic 5 1 + + /* IDSEL 11 */ + 0x5800 0 0 1 &mpic 6 1 + 0x5800 0 0 2 &mpic 5 1 + >; interrupt-parent = <&mpic>; interrupts = <24 2>; diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts index 61f25e15fd6..5dbb36edb03 100644 --- a/arch/powerpc/boot/dts/tqm8548-bigflash.dts +++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts @@ -442,7 +442,14 @@ interrupt-map = < /* IDSEL 28 */ 0xe000 0 0 1 &mpic 2 1 - 0xe000 0 0 2 &mpic 3 1>; + 0xe000 0 0 2 &mpic 3 1 + 0xe000 0 0 3 &mpic 6 1 + 0xe000 0 0 4 &mpic 5 1 + + /* IDSEL 11 */ + 0x5800 0 0 1 &mpic 6 1 + 0x5800 0 0 2 &mpic 5 1 + >; interrupt-parent = <&mpic>; interrupts = <24 2>; diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts index 025759c7c95..a050ae42710 100644 --- a/arch/powerpc/boot/dts/tqm8548.dts +++ b/arch/powerpc/boot/dts/tqm8548.dts @@ -442,7 +442,14 @@ interrupt-map = < /* IDSEL 28 */ 0xe000 0 0 1 &mpic 2 1 - 0xe000 0 0 2 &mpic 3 1>; + 0xe000 0 0 2 &mpic 3 1 + 0xe000 0 0 3 &mpic 6 1 + 0xe000 0 0 4 &mpic 5 1 + + /* IDSEL 11 */ + 0x5800 0 0 1 &mpic 6 1 + 0x5800 0 0 2 &mpic 5 1 + >; interrupt-parent = <&mpic>; interrupts = <24 2>; diff --git a/arch/powerpc/boot/dts/tqm8555.dts b/arch/powerpc/boot/dts/tqm8555.dts index 95e28738183..81bad8cd375 100644 --- a/arch/powerpc/boot/dts/tqm8555.dts +++ b/arch/powerpc/boot/dts/tqm8555.dts @@ -311,7 +311,14 @@ interrupt-map = < /* IDSEL 28 */ 0xe000 0 0 1 &mpic 2 1 - 0xe000 0 0 2 &mpic 3 1>; + 0xe000 0 0 2 &mpic 3 1 + 0xe000 0 0 3 &mpic 6 1 + 0xe000 0 0 4 &mpic 5 1 + + /* IDSEL 11 */ + 0x5800 0 0 1 &mpic 6 1 + 0x5800 0 0 2 &mpic 5 1 + >; interrupt-parent = <&mpic>; interrupts = <24 2>; diff --git a/arch/powerpc/boot/dts/tqm8560.dts b/arch/powerpc/boot/dts/tqm8560.dts index ff70580a8f4..22ec39b5bee 100644 --- a/arch/powerpc/boot/dts/tqm8560.dts +++ b/arch/powerpc/boot/dts/tqm8560.dts @@ -382,7 +382,14 @@ interrupt-map = < /* IDSEL 28 */ 0xe000 0 0 1 &mpic 2 1 - 0xe000 0 0 2 &mpic 3 1>; + 0xe000 0 0 2 &mpic 3 1 + 0xe000 0 0 3 &mpic 6 1 + 0xe000 0 0 4 &mpic 5 1 + + /* IDSEL 11 */ + 0x5800 0 0 1 &mpic 6 1 + 0x5800 0 0 2 &mpic 5 1 + >; interrupt-parent = <&mpic>; interrupts = <24 2>; -- cgit v1.2.3-18-g5258 From e9502fbe2d1e754edfb70d5738f058853097c88c Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Wed, 21 Jul 2010 10:33:24 +0000 Subject: powerpc/tqm85xx: add a quirk for ti1520 PCMCIA bridge By default ti1520 bridge expects an input clock on CLOCK pin (to control power chip). However on this boards CLOCK should be generated by PCI1520 itself. Add a quirk that enables internal 16 KHz clock generation on this pin. Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Kumar Gala --- arch/powerpc/platforms/85xx/tqm85xx.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/85xx/tqm85xx.c b/arch/powerpc/platforms/85xx/tqm85xx.c index 5b0ab9966e9..8f29bbce536 100644 --- a/arch/powerpc/platforms/85xx/tqm85xx.c +++ b/arch/powerpc/platforms/85xx/tqm85xx.c @@ -151,6 +151,27 @@ static void tqm85xx_show_cpuinfo(struct seq_file *m) seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); } +static void __init tqm85xx_ti1520_fixup(struct pci_dev *pdev) +{ + unsigned int val; + + /* Do not do the fixup on other platforms! */ + if (!machine_is(tqm85xx)) + return; + + dev_info(&pdev->dev, "Using TI 1520 fixup on TQM85xx\n"); + + /* + * Enable P2CCLK bit in system control register + * to enable CLOCK output to power chip + */ + pci_read_config_dword(pdev, 0x80, &val); + pci_write_config_dword(pdev, 0x80, val | (1 << 27)); + +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1520, + tqm85xx_ti1520_fixup); + static struct of_device_id __initdata of_bus_ids[] = { { .compatible = "simple-bus", }, { .compatible = "gianfar", }, -- cgit v1.2.3-18-g5258 From 8a4ab218ef7034660982931b3e1eb6bbc2bde0ea Mon Sep 17 00:00:00 2001 From: Bradley Hughes Date: Wed, 21 Jul 2010 12:04:06 +0000 Subject: powerpc/85xx: Change deprecated binding for 85xx-based boards The "fsl,85..." style compatible binding was to be deprecated some time ago. This patch corrects existing occurrences of the incorrect binding. The memory-controller and l2-cache-controller are the only affected nodes. Signed-off-by: Bradley Hughes Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8540ads.dts | 4 ++-- arch/powerpc/boot/dts/mpc8541cds.dts | 4 ++-- arch/powerpc/boot/dts/mpc8544ds.dts | 4 ++-- arch/powerpc/boot/dts/mpc8548cds.dts | 4 ++-- arch/powerpc/boot/dts/mpc8555cds.dts | 4 ++-- arch/powerpc/boot/dts/mpc8560ads.dts | 4 ++-- arch/powerpc/boot/dts/mpc8568mds.dts | 4 ++-- 7 files changed, 14 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts index 9dc292962a9..8d1bf0fd926 100644 --- a/arch/powerpc/boot/dts/mpc8540ads.dts +++ b/arch/powerpc/boot/dts/mpc8540ads.dts @@ -71,14 +71,14 @@ }; memory-controller@2000 { - compatible = "fsl,8540-memory-controller"; + compatible = "fsl,mpc8540-memory-controller"; reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; interrupts = <18 2>; }; L2: l2-cache-controller@20000 { - compatible = "fsl,8540-l2-cache-controller"; + compatible = "fsl,mpc8540-l2-cache-controller"; reg = <0x20000 0x1000>; cache-line-size = <32>; // 32 bytes cache-size = <0x40000>; // L2, 256K diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts index 9a3ad311aed..87ff96549fa 100644 --- a/arch/powerpc/boot/dts/mpc8541cds.dts +++ b/arch/powerpc/boot/dts/mpc8541cds.dts @@ -71,14 +71,14 @@ }; memory-controller@2000 { - compatible = "fsl,8541-memory-controller"; + compatible = "fsl,mpc8541-memory-controller"; reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; interrupts = <18 2>; }; L2: l2-cache-controller@20000 { - compatible = "fsl,8541-l2-cache-controller"; + compatible = "fsl,mpc8541-l2-cache-controller"; reg = <0x20000 0x1000>; cache-line-size = <32>; // 32 bytes cache-size = <0x40000>; // L2, 256K diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts index 98e94b46566..d793968743c 100644 --- a/arch/powerpc/boot/dts/mpc8544ds.dts +++ b/arch/powerpc/boot/dts/mpc8544ds.dts @@ -73,14 +73,14 @@ }; memory-controller@2000 { - compatible = "fsl,8544-memory-controller"; + compatible = "fsl,mpc8544-memory-controller"; reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; interrupts = <18 2>; }; L2: l2-cache-controller@20000 { - compatible = "fsl,8544-l2-cache-controller"; + compatible = "fsl,mpc8544-l2-cache-controller"; reg = <0x20000 0x1000>; cache-line-size = <32>; // 32 bytes cache-size = <0x40000>; // L2, 256K diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts index 0f526245268..a17a5572fb7 100644 --- a/arch/powerpc/boot/dts/mpc8548cds.dts +++ b/arch/powerpc/boot/dts/mpc8548cds.dts @@ -74,14 +74,14 @@ }; memory-controller@2000 { - compatible = "fsl,8548-memory-controller"; + compatible = "fsl,mpc8548-memory-controller"; reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; interrupts = <18 2>; }; L2: l2-cache-controller@20000 { - compatible = "fsl,8548-l2-cache-controller"; + compatible = "fsl,mpc8548-l2-cache-controller"; reg = <0x20000 0x1000>; cache-line-size = <32>; // 32 bytes cache-size = <0x80000>; // L2, 512K diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts index 065b2f093de..5c5614f9eb1 100644 --- a/arch/powerpc/boot/dts/mpc8555cds.dts +++ b/arch/powerpc/boot/dts/mpc8555cds.dts @@ -71,14 +71,14 @@ }; memory-controller@2000 { - compatible = "fsl,8555-memory-controller"; + compatible = "fsl,mpc8555-memory-controller"; reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; interrupts = <18 2>; }; L2: l2-cache-controller@20000 { - compatible = "fsl,8555-l2-cache-controller"; + compatible = "fsl,mpc8555-l2-cache-controller"; reg = <0x20000 0x1000>; cache-line-size = <32>; // 32 bytes cache-size = <0x40000>; // L2, 256K diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts index a5bb1ec70a5..6e85e1ba085 100644 --- a/arch/powerpc/boot/dts/mpc8560ads.dts +++ b/arch/powerpc/boot/dts/mpc8560ads.dts @@ -71,14 +71,14 @@ }; memory-controller@2000 { - compatible = "fsl,8540-memory-controller"; + compatible = "fsl,mpc8540-memory-controller"; reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; interrupts = <18 2>; }; L2: l2-cache-controller@20000 { - compatible = "fsl,8540-l2-cache-controller"; + compatible = "fsl,mpc8540-l2-cache-controller"; reg = <0x20000 0x1000>; cache-line-size = <32>; // 32 bytes cache-size = <0x40000>; // L2, 256K diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts index 92fb17876e7..30cf0e098bb 100644 --- a/arch/powerpc/boot/dts/mpc8568mds.dts +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -124,14 +124,14 @@ }; memory-controller@2000 { - compatible = "fsl,8568-memory-controller"; + compatible = "fsl,mpc8568-memory-controller"; reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; interrupts = <18 2>; }; L2: l2-cache-controller@20000 { - compatible = "fsl,8568-l2-cache-controller"; + compatible = "fsl,mpc8568-l2-cache-controller"; reg = <0x20000 0x1000>; cache-line-size = <32>; // 32 bytes cache-size = <0x80000>; // L2, 512K -- cgit v1.2.3-18-g5258 From 51974d3162308695f888600b15c6f6009069dd0d Mon Sep 17 00:00:00 2001 From: Bradley Hughes Date: Wed, 21 Jul 2010 12:04:00 +0000 Subject: powerpc/85xx: Adding DTS for the STx GP3-SSA MPC8555 board This version uses "fsl,mpc8555..." instead of "fsl,85..." notation. There is also an 8541 version of this board so DTS for this board is specific to the 8555 processor. Another patch is coming to fix-up other DTS that use old notation. Signed-off-by: Bradley Hughes Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/stxssa8555.dts | 380 +++++++++++++++++++++++++++++++++++ 1 file changed, 380 insertions(+) create mode 100644 arch/powerpc/boot/dts/stxssa8555.dts (limited to 'arch') diff --git a/arch/powerpc/boot/dts/stxssa8555.dts b/arch/powerpc/boot/dts/stxssa8555.dts new file mode 100644 index 00000000000..49efd44057d --- /dev/null +++ b/arch/powerpc/boot/dts/stxssa8555.dts @@ -0,0 +1,380 @@ +/* + * MPC8555-based STx GP3 Device Tree Source + * + * Copyright 2006, 2008 Freescale Semiconductor Inc. + * + * Copyright 2010 Silicon Turnkey Express LLC. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "stx,gp3"; + compatible = "stx,gp3-8560", "stx,gp3"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8555@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; // 33 MHz, from uboot + bus-frequency = <0>; // 166 MHz + clock-frequency = <0>; // 825 MHz, from uboot + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + soc8555@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xe0000000 0x100000>; + bus-frequency = <0>; + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <8>; + }; + + ecm@1000 { + compatible = "fsl,mpc8555-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8555-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8555-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2, 256K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8555-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8555-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8555-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8555-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8555-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x2>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@4 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x4>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + crypto@30000 { + compatible = "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x7e>; + fsl,descriptor-types-mask = <0x01010ebf>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + cpm@919c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8555-cpm", "fsl,cpm2"; + reg = <0x919c0 0x30>; + ranges; + + muram@80000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0x0 0x2000 0x9000 0x1000>; + }; + }; + + brg@919f0 { + compatible = "fsl,mpc8555-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <0x919f0 0x10 0x915f0 0x10>; + }; + + cpmpic: pic@90c00 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + interrupts = <46 2>; + interrupt-parent = <&mpic>; + reg = <0x90c00 0x80>; + compatible = "fsl,mpc8555-cpm-pic", "fsl,cpm2-pic"; + }; + }; + }; + + pci0: pci@e0008000 { + interrupt-map-mask = <0x1f800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x10 */ + 0x8000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x8000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x8000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x8000 0x0 0x0 0x4 &mpic 0x3 0x1 + + /* IDSEL 0x11 */ + 0x8800 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x8800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x8800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x8800 0x0 0x0 0x4 &mpic 0x3 0x1 + + /* IDSEL 0x12 (Slot 1) */ + 0x9000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x9000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x9000 0x0 0x0 0x4 &mpic 0x3 0x1 + + /* IDSEL 0x13 (Slot 2) */ + 0x9800 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x9800 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x9800 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x9800 0x0 0x0 0x4 &mpic 0x0 0x1 + + /* IDSEL 0x14 (Slot 3) */ + 0xa000 0x0 0x0 0x1 &mpic 0x2 0x1 + 0xa000 0x0 0x0 0x2 &mpic 0x3 0x1 + 0xa000 0x0 0x0 0x3 &mpic 0x0 0x1 + 0xa000 0x0 0x0 0x4 &mpic 0x1 0x1 + + /* IDSEL 0x15 (Slot 4) */ + 0xa800 0x0 0x0 0x1 &mpic 0x3 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0x0 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0x1 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0x2 0x1 + + /* Bus 1 (Tundra Bridge) */ + /* IDSEL 0x12 (ISA bridge) */ + 0x19000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x19000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x19000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>; + interrupt-parent = <&mpic>; + interrupts = <24 2>; + bus-range = <0 0>; + ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008000 0x1000>; + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + + i8259@19000 { + interrupt-controller; + device_type = "interrupt-controller"; + reg = <0x19000 0x0 0x0 0x0 0x1>; + #address-cells = <0>; + #interrupt-cells = <2>; + compatible = "chrp,iic"; + interrupts = <1>; + interrupt-parent = <&pci0>; + }; + }; + + pci1: pci@e0009000 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x15 */ + 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>; + interrupt-parent = <&mpic>; + interrupts = <25 2>; + bus-range = <0 0>; + ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0009000 0x1000>; + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + }; +}; -- cgit v1.2.3-18-g5258 From 30be4c965c37418606006940f45919694693e3f9 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Fri, 2 Jul 2010 17:25:03 -0500 Subject: powerpc/85xx: Introduce support for the Freescale P1022DS reference board Introduce basic support for the Freescale P1022DS reference board, based on the Freescale BSP for this board. This patch excludes the DIU, SSI, and MMC/SD drivers. Only a 36-bit DTS is provided. Update mpc86xx_smp_defconfig and mpc85xx_defconfig to support the P1022DS. This means enabling 64-bit physical address support, increasing the maximum zone order to 12 (to allow the DIU driver to allocate large chunks), and clean up the audio options to disable the deprecated OSS support. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/p1022ds.dts | 633 +++++++++++++++++++++++++++++ arch/powerpc/configs/mpc85xx_defconfig | 34 +- arch/powerpc/configs/mpc85xx_smp_defconfig | 34 +- arch/powerpc/platforms/85xx/Kconfig | 8 + arch/powerpc/platforms/85xx/Makefile | 1 + arch/powerpc/platforms/85xx/p1022_ds.c | 148 +++++++ 6 files changed, 814 insertions(+), 44 deletions(-) create mode 100644 arch/powerpc/boot/dts/p1022ds.dts create mode 100644 arch/powerpc/platforms/85xx/p1022_ds.c (limited to 'arch') diff --git a/arch/powerpc/boot/dts/p1022ds.dts b/arch/powerpc/boot/dts/p1022ds.dts new file mode 100644 index 00000000000..8bcb10b9267 --- /dev/null +++ b/arch/powerpc/boot/dts/p1022ds.dts @@ -0,0 +1,633 @@ +/* + * P1022 DS 36Bit Physical Address Map Device Tree Source + * + * Copyright 2010 Freescale Semiconductor, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +/ { + model = "fsl,P1022"; + compatible = "fsl,P1022DS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,P1022@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + + PowerPC,P1022@1 { + device_type = "cpu"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + }; + + localbus@fffe05000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus"; + reg = <0 0xffe05000 0 0x1000>; + interrupts = <19 2>; + + ranges = <0x0 0x0 0xf 0xe8000000 0x08000000 + 0x1 0x0 0xf 0xe0000000 0x08000000 + 0x2 0x0 0x0 0xffa00000 0x00040000 + 0x3 0x0 0xf 0xffdf0000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + reg = <0x0 0x03000000>; + label = "ramdisk-nor"; + read-only; + }; + + partition@3000000 { + reg = <0x03000000 0x00e00000>; + label = "diagnostic-nor"; + read-only; + }; + + partition@3e00000 { + reg = <0x03e00000 0x00200000>; + label = "dink-nor"; + read-only; + }; + + partition@4000000 { + reg = <0x04000000 0x00400000>; + label = "kernel-nor"; + read-only; + }; + + partition@4400000 { + reg = <0x04400000 0x03b00000>; + label = "jffs2-nor"; + }; + + partition@7f00000 { + reg = <0x07f00000 0x00080000>; + label = "dtb-nor"; + read-only; + }; + + partition@7f80000 { + reg = <0x07f80000 0x00080000>; + label = "u-boot-nor"; + read-only; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elbc-fcm-nand"; + reg = <0x2 0x0 0x40000>; + + partition@0 { + reg = <0x0 0x02000000>; + label = "u-boot-nand"; + read-only; + }; + + partition@2000000 { + reg = <0x02000000 0x10000000>; + label = "jffs2-nand"; + }; + + partition@12000000 { + reg = <0x12000000 0x10000000>; + label = "ramdisk-nand"; + read-only; + }; + + partition@22000000 { + reg = <0x22000000 0x04000000>; + label = "kernel-nand"; + }; + + partition@26000000 { + reg = <0x26000000 0x01000000>; + label = "dtb-nand"; + read-only; + }; + + partition@27000000 { + reg = <0x27000000 0x19000000>; + label = "reserved-nand"; + }; + }; + }; + + soc@fffe00000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,p1022-immr", "simple-bus"; + ranges = <0x0 0xf 0xffe00000 0x100000>; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,p1022-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <16 2>; + }; + + memory-controller@2000 { + compatible = "fsl,p1022-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + dfsrr; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + dfsrr; + + wm8776:codec@1a { + compatible = "wlf,wm8776"; + reg = <0x1a>; + /* MCLK source is a stand-alone oscillator */ + clock-frequency = <12288000>; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + }; + + spi@7000 { + cell-index = <0>; + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,espi"; + reg = <0x7000 0x1000>; + interrupts = <59 0x2>; + espi,num-ss-bits = <4>; + mode = "cpu"; + + fsl_m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,espi-flash"; + reg = <0>; + linux,modalias = "fsl_m25p80"; + spi-max-frequency = <40000000>; /* input clock */ + partition@0 { + label = "u-boot-spi"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@100000 { + label = "kernel-spi"; + reg = <0x00100000 0x00500000>; + read-only; + }; + partition@600000 { + label = "dtb-spi"; + reg = <0x00600000 0x00100000>; + read-only; + }; + partition@700000 { + label = "file system-spi"; + reg = <0x00700000 0x00900000>; + }; + }; + }; + + ssi@15000 { + compatible = "fsl,mpc8610-ssi"; + cell-index = <0>; + reg = <0x15000 0x100>; + interrupts = <75 2>; + fsl,mode = "i2s-slave"; + codec-handle = <&wm8776>; + fsl,playback-dma = <&dma00>; + fsl,capture-dma = <&dma01>; + fsl,fifo-depth = <16>; + }; + + dma@c300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,eloplus-dma"; + reg = <0xc300 0x4>; + ranges = <0x0 0xc100 0x200>; + cell-index = <1>; + dma00: dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupts = <76 2>; + }; + dma01: dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupts = <77 2>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupts = <78 2>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupts = <79 2>; + }; + }; + + gpio: gpio-controller@f000 { + #gpio-cells = <2>; + compatible = "fsl,mpc8572-gpio"; + reg = <0xf000 0x100>; + interrupts = <47 0x2>; + gpio-controller; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,p1022-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2, 256K + interrupts = <16 2>; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupts = <23 2>; + }; + }; + + usb@22000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-usb2-dr"; + reg = <0x22000 0x1000>; + interrupts = <28 0x2>; + phy_type = "ulpi"; + }; + + mdio@24000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,etsec2-mdio"; + reg = <0x24000 0x1000 0xb0030 0x4>; + + phy0: ethernet-phy@0 { + interrupts = <3 1>; + reg = <0x1>; + }; + phy1: ethernet-phy@1 { + interrupts = <9 1>; + reg = <0x2>; + }; + }; + + mdio@25000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,etsec2-mdio"; + reg = <0x25000 0x1000 0xb1030 0x4>; + }; + + enet0: ethernet@B0000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "fsl,etsec2"; + fsl,num_rx_queues = <0x8>; + fsl,num_tx_queues = <0x8>; + fsl,magic-packet; + fsl,wake-on-filer; + local-mac-address = [ 00 00 00 00 00 00 ]; + fixed-link = <1 1 1000 0 0>; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + queue-group@0{ + #address-cells = <1>; + #size-cells = <1>; + reg = <0xB0000 0x1000>; + interrupts = <29 2 30 2 34 2>; + }; + queue-group@1{ + #address-cells = <1>; + #size-cells = <1>; + reg = <0xB4000 0x1000>; + interrupts = <17 2 18 2 24 2>; + }; + }; + + enet1: ethernet@B1000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "fsl,etsec2"; + fsl,num_rx_queues = <0x8>; + fsl,num_tx_queues = <0x8>; + local-mac-address = [ 00 00 00 00 00 00 ]; + fixed-link = <1 1 1000 0 0>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + queue-group@0{ + #address-cells = <1>; + #size-cells = <1>; + reg = <0xB1000 0x1000>; + interrupts = <35 2 36 2 40 2>; + }; + queue-group@1{ + #address-cells = <1>; + #size-cells = <1>; + reg = <0xB5000 0x1000>; + interrupts = <51 2 52 2 67 2>; + }; + }; + + sdhci@2e000 { + compatible = "fsl,p1022-esdhc", "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <72 0x2>; + fsl,sdhci-auto-cmd12; + /* Filled in by U-Boot */ + clock-frequency = <0>; + }; + + crypto@30000 { + compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0", + "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1", + "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 58 2>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x97c>; + fsl,descriptor-types-mask = <0x3a30abf>; + }; + + sata@18000 { + compatible = "fsl,mpc8536-sata", "fsl,pq-sata"; + reg = <0x18000 0x1000>; + cell-index = <1>; + interrupts = <74 0x2>; + }; + + sata@19000 { + compatible = "fsl,mpc8536-sata", "fsl,pq-sata"; + reg = <0x19000 0x1000>; + cell-index = <2>; + interrupts = <41 0x2>; + }; + + power@e0070{ + compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc"; + reg = <0xe0070 0x20>; + }; + + display@10000 { + compatible = "fsl,diu", "fsl,p1022-diu"; + reg = <0x10000 1000>; + interrupts = <64 2>; + }; + + timer@41100 { + compatible = "fsl,mpic-global-timer"; + reg = <0x41100 0x204>; + interrupts = <0xf7 0x2>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + msi@41600 { + compatible = "fsl,p1022-msi", "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 + 0xe1 0 + 0xe2 0 + 0xe3 0 + 0xe4 0 + 0xe5 0 + 0xe6 0 + 0xe7 0>; + }; + + global-utilities@e0000 { //global utilities block + compatible = "fsl,p1022-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + }; + + pci0: pcie@fffe09000 { + compatible = "fsl,p1022-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xf 0xffe09000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xa0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + clock-frequency = <33333333>; + interrupts = <16 2>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 4 1 + 0000 0 0 2 &mpic 5 1 + 0000 0 0 3 &mpic 6 1 + 0000 0 0 4 &mpic 7 1 + >; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + compatible = "fsl,p1022-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xf 0xffe0a000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xc0000000 0xc 0x40000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>; + clock-frequency = <33333333>; + interrupts = <16 2>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 0 1 + 0000 0 0 2 &mpic 1 1 + 0000 0 0 3 &mpic 2 1 + 0000 0 0 4 &mpic 3 1 + >; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + + pci2: pcie@fffe0b000 { + compatible = "fsl,p1022-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xf 0xffe0b000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + clock-frequency = <33333333>; + interrupts = <16 2>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 8 1 + 0000 0 0 2 &mpic 9 1 + 0000 0 0 3 &mpic 10 1 + 0000 0 0 4 &mpic 11 1 + >; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index cfebef9f912..d32f31a03f5 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -19,7 +19,8 @@ CONFIG_E500=y CONFIG_FSL_EMB_PERFMON=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y -# CONFIG_PHYS_64BIT is not set +CONFIG_PTE_64BIT=y +CONFIG_PHYS_64BIT=y CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y CONFIG_PPC_MMU_NOHASH_32=y @@ -28,7 +29,7 @@ CONFIG_PPC_BOOK3E_MMU=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -239,6 +240,7 @@ CONFIG_MPC85xx_MDS=y CONFIG_MPC8536_DS=y CONFIG_MPC85xx_DS=y CONFIG_MPC85xx_RDB=y +CONFIG_P1022_DS=y CONFIG_SOCRATES=y CONFIG_KSI8560=y CONFIG_XES_MPC85xx=y @@ -311,7 +313,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y @@ -321,7 +323,7 @@ CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set # CONFIG_PPC_256K_PAGES is not set -CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_FORCE_MAX_ZONEORDER=12 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set CONFIG_EXTRA_TARGETS="" @@ -1122,16 +1124,13 @@ CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y CONFIG_SOUND=y -CONFIG_SOUND_OSS_CORE=y -CONFIG_SOUND_OSS_CORE_PRECLAIM=y +# CONFIG_SOUND_OSS_CORE is not set CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y # CONFIG_SND_SEQUENCER is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set # CONFIG_SND_HRTIMER is not set # CONFIG_SND_DYNAMIC_MINORS is not set # CONFIG_SND_SUPPORT_OLD_API is not set @@ -1145,12 +1144,7 @@ CONFIG_SND_VMASTER=y # CONFIG_SND_SBAWE_SEQ is not set # CONFIG_SND_EMU10K1_SEQ is not set CONFIG_SND_AC97_CODEC=y -CONFIG_SND_DRIVERS=y -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set -# CONFIG_SND_AC97_POWER_SAVE is not set +# CONFIG_SND_DRIVERS is not set CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set @@ -1218,12 +1212,8 @@ CONFIG_SND_INTEL8X0=y # CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set -CONFIG_SND_PPC=y -CONFIG_SND_USB=y -# CONFIG_SND_USB_AUDIO is not set -# CONFIG_SND_USB_UA101 is not set -# CONFIG_SND_USB_USX2Y is not set -# CONFIG_SND_USB_CAIAQ is not set +# CONFIG_SND_PPC is not set +# CONFIG_SND_USB is not set # CONFIG_SND_SOC is not set # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=y diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index f5451d80f19..f93de10adcd 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -19,7 +19,8 @@ CONFIG_E500=y CONFIG_FSL_EMB_PERFMON=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y -# CONFIG_PHYS_64BIT is not set +CONFIG_PTE_64BIT=y +CONFIG_PHYS_64BIT=y CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y CONFIG_PPC_MMU_NOHASH_32=y @@ -29,7 +30,7 @@ CONFIG_SMP=y CONFIG_NR_CPUS=8 CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -243,6 +244,7 @@ CONFIG_MPC85xx_MDS=y CONFIG_MPC8536_DS=y CONFIG_MPC85xx_DS=y CONFIG_MPC85xx_RDB=y +CONFIG_P1022_DS=y CONFIG_SOCRATES=y CONFIG_KSI8560=y CONFIG_XES_MPC85xx=y @@ -316,7 +318,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y @@ -326,7 +328,7 @@ CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set # CONFIG_PPC_256K_PAGES is not set -CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_FORCE_MAX_ZONEORDER=12 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set CONFIG_EXTRA_TARGETS="" @@ -1127,16 +1129,13 @@ CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y CONFIG_SOUND=y -CONFIG_SOUND_OSS_CORE=y -CONFIG_SOUND_OSS_CORE_PRECLAIM=y +# CONFIG_SOUND_OSS_CORE is not set CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y # CONFIG_SND_SEQUENCER is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set # CONFIG_SND_HRTIMER is not set # CONFIG_SND_DYNAMIC_MINORS is not set # CONFIG_SND_SUPPORT_OLD_API is not set @@ -1150,12 +1149,7 @@ CONFIG_SND_VMASTER=y # CONFIG_SND_SBAWE_SEQ is not set # CONFIG_SND_EMU10K1_SEQ is not set CONFIG_SND_AC97_CODEC=y -CONFIG_SND_DRIVERS=y -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set -# CONFIG_SND_AC97_POWER_SAVE is not set +# CONFIG_SND_DRIVERS is not set CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set @@ -1223,12 +1217,8 @@ CONFIG_SND_INTEL8X0=y # CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set -CONFIG_SND_PPC=y -CONFIG_SND_USB=y -# CONFIG_SND_USB_AUDIO is not set -# CONFIG_SND_USB_UA101 is not set -# CONFIG_SND_USB_USX2Y is not set -# CONFIG_SND_USB_CAIAQ is not set +# CONFIG_SND_PPC is not set +# CONFIG_SND_USB is not set # CONFIG_SND_SOC is not set # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=y diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 3a2ade2e443..bea1f5905ad 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -65,6 +65,14 @@ config MPC85xx_RDB help This option enables support for the MPC85xx RDB (P2020 RDB) board +config P1022_DS + bool "Freescale P1022 DS" + select DEFAULT_UIMAGE + select CONFIG_PHYS_64BIT # The DTS has 36-bit addresses + select SWIOTLB + help + This option enables support for the Freescale P1022DS reference board. + config SOCRATES bool "Socrates" select DEFAULT_UIMAGE diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index 387c128f2c8..a2ec3f8f4d0 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_MPC8536_DS) += mpc8536_ds.o obj-$(CONFIG_MPC85xx_DS) += mpc85xx_ds.o obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o +obj-$(CONFIG_P1022_DS) += p1022_ds.o obj-$(CONFIG_P4080_DS) += p4080_ds.o corenet_ds.o obj-$(CONFIG_STX_GP3) += stx_gp3.o obj-$(CONFIG_TQM85xx) += tqm85xx.o diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c new file mode 100644 index 00000000000..e1467c93745 --- /dev/null +++ b/arch/powerpc/platforms/85xx/p1022_ds.c @@ -0,0 +1,148 @@ +/* + * P1022DS board specific routines + * + * Authors: Travis Wheatley + * Dave Liu + * Timur Tabi + * + * Copyright 2010 Freescale Semiconductor, Inc. + * + * This file is taken from the Freescale P1022DS BSP, with modifications: + * 1) No DIU support (pending rewrite of DIU code) + * 2) No AMP support + * 3) No PCI endpoint support + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include + +#include +#include + +#include +#include + +void __init p1022_ds_pic_init(void) +{ + struct mpic *mpic; + struct resource r; + struct device_node *np; + + np = of_find_node_by_type(NULL, "open-pic"); + if (!np) { + pr_err("Could not find open-pic node\n"); + return; + } + + if (of_address_to_resource(np, 0, &r)) { + pr_err("Failed to map mpic register space\n"); + of_node_put(np); + return; + } + + mpic = mpic_alloc(np, r.start, + MPIC_PRIMARY | MPIC_WANTS_RESET | + MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS | + MPIC_SINGLE_DEST_CPU, + 0, 256, " OpenPIC "); + + BUG_ON(mpic == NULL); + of_node_put(np); + + mpic_init(mpic); +} + +#ifdef CONFIG_SMP +void __init mpc85xx_smp_init(void); +#endif + +/* + * Setup the architecture + */ +static void __init p1022_ds_setup_arch(void) +{ +#ifdef CONFIG_PCI + struct device_node *np; +#endif + dma_addr_t max = 0xffffffff; + + if (ppc_md.progress) + ppc_md.progress("p1022_ds_setup_arch()", 0); + +#ifdef CONFIG_PCI + for_each_compatible_node(np, "pci", "fsl,p1022-pcie") { + struct resource rsrc; + struct pci_controller *hose; + + of_address_to_resource(np, 0, &rsrc); + + if ((rsrc.start & 0xfffff) == 0x8000) + fsl_add_bridge(np, 1); + else + fsl_add_bridge(np, 0); + + hose = pci_find_hose_for_OF_device(np); + max = min(max, hose->dma_window_base_cur + + hose->dma_window_size); + } +#endif + +#ifdef CONFIG_SMP + mpc85xx_smp_init(); +#endif + +#ifdef CONFIG_SWIOTLB + if (lmb_end_of_DRAM() > max) { + ppc_swiotlb_enable = 1; + set_pci_dma_ops(&swiotlb_dma_ops); + ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb; + } +#endif + + pr_info("Freescale P1022 DS reference board\n"); +} + +static struct of_device_id __initdata p1022_ds_ids[] = { + { .type = "soc", }, + { .compatible = "soc", }, + { .compatible = "simple-bus", }, + { .compatible = "gianfar", }, + {}, +}; + +static int __init p1022_ds_publish_devices(void) +{ + return of_platform_bus_probe(NULL, p1022_ds_ids, NULL); +} +machine_device_initcall(p1022_ds, p1022_ds_publish_devices); + +machine_arch_initcall(p1022_ds, swiotlb_setup_bus_notifier); + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init p1022_ds_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "fsl,p1022ds"); +} + +define_machine(p1022_ds) { + .name = "P1022 DS", + .probe = p1022_ds_probe, + .setup_arch = p1022_ds_setup_arch, + .init_IRQ = p1022_ds_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; -- cgit v1.2.3-18-g5258 From c4b6a77663f5879de20561144716cfb675815e82 Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Tue, 23 Mar 2010 08:57:01 +0100 Subject: powerpc/8xx: Add support for the MPC8xx based boards from TQC Supported SMC1 (serial console), SCC1 Ethernet (10Mbps HD). FEC Ethernet, 8MB NOR CFI Flash. Tested on STK8xx with TQM860L (with FEC) and with TQM855M (without FEC). Signed-off-by: Heiko Schocher Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/tqm8xx.dts | 172 ++++++ arch/powerpc/configs/tqm8xx_defconfig | 934 ++++++++++++++++++++++++++++++ arch/powerpc/platforms/8xx/Kconfig | 6 + arch/powerpc/platforms/8xx/Makefile | 1 + arch/powerpc/platforms/8xx/tqm8xx_setup.c | 156 +++++ 5 files changed, 1269 insertions(+) create mode 100644 arch/powerpc/boot/dts/tqm8xx.dts create mode 100644 arch/powerpc/configs/tqm8xx_defconfig create mode 100644 arch/powerpc/platforms/8xx/tqm8xx_setup.c (limited to 'arch') diff --git a/arch/powerpc/boot/dts/tqm8xx.dts b/arch/powerpc/boot/dts/tqm8xx.dts new file mode 100644 index 00000000000..f6da7ec49a8 --- /dev/null +++ b/arch/powerpc/boot/dts/tqm8xx.dts @@ -0,0 +1,172 @@ +/* + * TQM8XX Device Tree Source + * + * Heiko Schocher + * 2010 DENX Software Engineering GmbH + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "TQM8xx"; + compatible = "tqc,tqm8xx"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = ð0; + ethernet1 = ð1; + mdio1 = &phy1; + serial0 = &smc1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,860@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <16>; // 16 bytes + i-cache-line-size = <16>; // 16 bytes + d-cache-size = <0x1000>; // L1, 4K + i-cache-size = <0x1000>; // L1, 4K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + interrupts = <15 2>; // decrementer interrupt + interrupt-parent = <&PIC>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x2000000>; + }; + + localbus@fff00100 { + compatible = "fsl,mpc860-localbus", "fsl,pq1-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xfff00100 0x40>; + + ranges = < + 0x0 0x0 0x40000000 0x800000 + >; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <4>; + device-width = <2>; + }; + }; + + soc@fff00000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xfff00000 0x00004000>; + + phy1: mdio@e00 { + compatible = "fsl,mpc866-fec-mdio", "fsl,pq1-fec-mdio"; + reg = <0xe00 0x188>; + #address-cells = <1>; + #size-cells = <0>; + PHY: ethernet-phy@f { + reg = <0xf>; + device_type = "ethernet-phy"; + }; + }; + + eth1: ethernet@e00 { + device_type = "network"; + compatible = "fsl,mpc866-fec-enet", + "fsl,pq1-fec-enet"; + reg = <0xe00 0x188>; + interrupts = <3 1>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY>; + linux,network-index = <1>; + }; + + PIC: pic@0 { + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x24>; + compatible = "fsl,mpc860-pic", "fsl,pq1-pic"; + }; + + cpm@9c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc860-cpm", "fsl,cpm1"; + ranges; + reg = <0x9c0 0x40>; + brg-frequency = <0>; + interrupts = <0 2>; // cpm error interrupt + interrupt-parent = <&CPM_PIC>; + + muram@2000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x2000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0x0 0x2000>; + }; + }; + + brg@9f0 { + compatible = "fsl,mpc860-brg", + "fsl,cpm1-brg", + "fsl,cpm-brg"; + reg = <0x9f0 0x10>; + clock-frequency = <0>; + }; + + CPM_PIC: pic@930 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupts = <5 2 0 2>; + interrupt-parent = <&PIC>; + reg = <0x930 0x20>; + compatible = "fsl,mpc860-cpm-pic", + "fsl,cpm1-pic"; + }; + + + smc1: serial@a80 { + device_type = "serial"; + compatible = "fsl,mpc860-smc-uart", + "fsl,cpm1-smc-uart"; + reg = <0xa80 0x10 0x3e80 0x40>; + interrupts = <4>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <0x90>; + }; + + eth0: ethernet@a00 { + device_type = "network"; + compatible = "fsl,mpc860-scc-enet", + "fsl,cpm1-scc-enet"; + reg = <0xa00 0x18 0x3c00 0x100>; + interrupts = <30>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-command = <0000>; + linux,network-index = <0>; + fixed-link = <0 0 10 0 0>; + }; + }; + }; +}; diff --git a/arch/powerpc/configs/tqm8xx_defconfig b/arch/powerpc/configs/tqm8xx_defconfig new file mode 100644 index 00000000000..85e654b6487 --- /dev/null +++ b/arch/powerpc/configs/tqm8xx_defconfig @@ -0,0 +1,934 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.34-rc1 +# Tue Mar 23 08:22:15 2010 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +# CONFIG_PPC_BOOK3S_32 is not set +# CONFIG_PPC_85xx is not set +CONFIG_PPC_8xx=y +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_8xx=y +CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_NOT_COHERENT_CACHE=y +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set +CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +# CONFIG_PPC_UDBG_16550 is not set +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DTC=y +# CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +# CONFIG_BASE_FULL is not set +# CONFIG_FUTEX is not set +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set +# CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_BASE_SMALL=1 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set +# CONFIG_FREEZER is not set + +# +# Platform support +# +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +CONFIG_CPM1=y +# CONFIG_MPC8XXFADS is not set +# CONFIG_MPC86XADS is not set +# CONFIG_MPC885ADS is not set +# CONFIG_PPC_EP88XC is not set +# CONFIG_PPC_ADDER875 is not set +# CONFIG_PPC_MGSUVD is not set +CONFIG_TQM8XX=y + +# +# MPC8xx CPM Options +# + +# +# Generic MPC8xx Options +# +CONFIG_8xx_COPYBACK=y +# CONFIG_8xx_GPIO is not set +# CONFIG_8xx_CPU6 is not set +# CONFIG_8xx_CPU15 is not set +CONFIG_NO_UCODE_PATCH=y +# CONFIG_USB_SOF_UCODE_PATCH is not set +# CONFIG_I2C_SPI_UCODE_PATCH is not set +# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set +# CONFIG_PQ2ADS is not set +# CONFIG_IPIC is not set +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set +# CONFIG_FSL_ULI1575 is not set +CONFIG_CPM=y +# CONFIG_SIMPLE_GPIO is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_HZ_100=y +# CONFIG_HZ_250 is not set +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=100 +CONFIG_SCHED_HRTICK=y +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_MATH_EMULATION is not set +CONFIG_8XX_MINIMAL_FPEMU=y +# CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set +CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" +# CONFIG_PM is not set +# CONFIG_SECCOMP is not set +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_FSL_SOC=y +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set +# CONFIG_PCI_SYSCALL is not set +# CONFIG_PCI_QSPAN is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_CFI_FLAGADM is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y +CONFIG_OF_DEVICE=y +CONFIG_OF_MDIO=y +# CONFIG_PARPORT is not set +# CONFIG_BLK_DEV is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +CONFIG_DAVICOM_PHY=y +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +CONFIG_FIXED_PHY=y +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_XILINX_EMACLITE is not set +CONFIG_FS_ENET=y +CONFIG_FS_ENET_HAS_SCC=y +CONFIG_FS_ENET_HAS_FEC=y +CONFIG_FS_ENET_MDIO_FEC=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_CPM=y +CONFIG_SERIAL_CPM_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_HVC_UDBG is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_SOUND is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_EDAC is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_LOGFS is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +# CONFIG_NLS is not set +# CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC32 is not set +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_DEBUG_PAGEALLOC is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y +CONFIG_PRINT_STACK_DEPTH=64 +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +# CONFIG_CRYPTO is not set +CONFIG_PPC_CLOCK=y +CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig index 48a920a98e7..dd35ce081cf 100644 --- a/arch/powerpc/platforms/8xx/Kconfig +++ b/arch/powerpc/platforms/8xx/Kconfig @@ -55,6 +55,12 @@ config PPC_MGSUVD help This enables support for the Keymile MGSUVD board. +config TQM8XX + bool "TQM8XX" + select CPM1 + help + support for the mpc8xx based boards from TQM. + endchoice menu "Freescale Ethernet driver platform-specific options" diff --git a/arch/powerpc/platforms/8xx/Makefile b/arch/powerpc/platforms/8xx/Makefile index bdbfd749601..a491fe6b94f 100644 --- a/arch/powerpc/platforms/8xx/Makefile +++ b/arch/powerpc/platforms/8xx/Makefile @@ -7,3 +7,4 @@ obj-$(CONFIG_MPC86XADS) += mpc86xads_setup.o obj-$(CONFIG_PPC_EP88XC) += ep88xc.o obj-$(CONFIG_PPC_ADDER875) += adder875.o obj-$(CONFIG_PPC_MGSUVD) += mgsuvd.o +obj-$(CONFIG_TQM8XX) += tqm8xx_setup.o diff --git a/arch/powerpc/platforms/8xx/tqm8xx_setup.c b/arch/powerpc/platforms/8xx/tqm8xx_setup.c new file mode 100644 index 00000000000..b71c650fbb1 --- /dev/null +++ b/arch/powerpc/platforms/8xx/tqm8xx_setup.c @@ -0,0 +1,156 @@ +/* + * Platform setup for the MPC8xx based boards from TQM. + * + * Heiko Schocher + * Copyright 2010 DENX Software Engineering GmbH + * + * based on: + * Vitaly Bordug + * + * Copyright 2005 MontaVista Software Inc. + * + * Heavily modified by Scott Wood + * Copyright 2007 Freescale Semiconductor, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "mpc8xx.h" + +struct cpm_pin { + int port, pin, flags; +}; + +static struct __initdata cpm_pin tqm8xx_pins[] = { + /* SMC1 */ + {CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */ + {CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */ + + /* SCC1 */ + {CPM_PORTA, 5, CPM_PIN_INPUT}, /* CLK1 */ + {CPM_PORTA, 7, CPM_PIN_INPUT}, /* CLK2 */ + {CPM_PORTA, 14, CPM_PIN_INPUT}, /* TX */ + {CPM_PORTA, 15, CPM_PIN_INPUT}, /* RX */ + {CPM_PORTC, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TENA */ + {CPM_PORTC, 10, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, + {CPM_PORTC, 11, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, +}; + +static struct __initdata cpm_pin tqm8xx_fec_pins[] = { + /* MII */ + {CPM_PORTD, 3, CPM_PIN_OUTPUT}, + {CPM_PORTD, 4, CPM_PIN_OUTPUT}, + {CPM_PORTD, 5, CPM_PIN_OUTPUT}, + {CPM_PORTD, 6, CPM_PIN_OUTPUT}, + {CPM_PORTD, 7, CPM_PIN_OUTPUT}, + {CPM_PORTD, 8, CPM_PIN_OUTPUT}, + {CPM_PORTD, 9, CPM_PIN_OUTPUT}, + {CPM_PORTD, 10, CPM_PIN_OUTPUT}, + {CPM_PORTD, 11, CPM_PIN_OUTPUT}, + {CPM_PORTD, 12, CPM_PIN_OUTPUT}, + {CPM_PORTD, 13, CPM_PIN_OUTPUT}, + {CPM_PORTD, 14, CPM_PIN_OUTPUT}, + {CPM_PORTD, 15, CPM_PIN_OUTPUT}, +}; + +static void __init init_pins(int n, struct cpm_pin *pin) +{ + int i; + + for (i = 0; i < n; i++) { + cpm1_set_pin(pin->port, pin->pin, pin->flags); + pin++; + } +} + +static void __init init_ioports(void) +{ + struct device_node *dnode; + struct property *prop; + int len; + + init_pins(ARRAY_SIZE(tqm8xx_pins), &tqm8xx_pins[0]); + + cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX); + + dnode = of_find_node_by_name(NULL, "aliases"); + if (dnode == NULL) + return; + prop = of_find_property(dnode, "ethernet1", &len); + if (prop == NULL) + return; + + /* init FEC pins */ + init_pins(ARRAY_SIZE(tqm8xx_fec_pins), &tqm8xx_fec_pins[0]); +} + +static void __init tqm8xx_setup_arch(void) +{ + cpm_reset(); + init_ioports(); +} + +static int __init tqm8xx_probe(void) +{ + unsigned long node = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(node, "tqc,tqm8xx"); +} + +static struct of_device_id __initdata of_bus_ids[] = { + { .name = "soc", }, + { .name = "cpm", }, + { .name = "localbus", }, + { .compatible = "simple-bus" }, + {}, +}; + +static int __init declare_of_platform_devices(void) +{ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + + return 0; +} +machine_device_initcall(tqm8xx, declare_of_platform_devices); + +define_machine(tqm8xx) { + .name = "TQM8xx", + .probe = tqm8xx_probe, + .setup_arch = tqm8xx_setup_arch, + .init_IRQ = mpc8xx_pics_init, + .get_irq = mpc8xx_get_irq, + .restart = mpc8xx_restart, + .calibrate_decr = mpc8xx_calibrate_decr, + .set_rtc_time = mpc8xx_set_rtc_time, + .get_rtc_time = mpc8xx_get_rtc_time, + .progress = udbg_progress, +}; -- cgit v1.2.3-18-g5258