From 405505c2b7b9f8a2d2b90e9e7fb4590b059e15dd Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Sun, 16 Jan 2011 13:22:03 +0200
Subject: arm: omap2: clksel: fix compile warningOrganization: Texas
 Instruments\n

Fix the following compile warning:
arch/arm/mach-omap2/clkt_clksel.c: In function '_get_div_and_fieldval':
arch/arm/mach-omap2/clkt_clksel.c:100:35: warning: 'max_clkr' may be
used uninitialized in this function

Acked-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/clkt_clksel.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clkt_clksel.c b/arch/arm/mach-omap2/clkt_clksel.c
index a781cd6795a..e25364de028 100644
--- a/arch/arm/mach-omap2/clkt_clksel.c
+++ b/arch/arm/mach-omap2/clkt_clksel.c
@@ -97,7 +97,7 @@ static u8 _get_div_and_fieldval(struct clk *src_clk, struct clk *clk,
 				u32 *field_val)
 {
 	const struct clksel *clks;
-	const struct clksel_rate *clkr, *max_clkr;
+	const struct clksel_rate *clkr, *max_clkr = NULL;
 	u8 max_div = 0;
 
 	clks = _get_clksel_by_parent(clk, src_clk);
-- 
cgit v1.2.3-18-g5258


From 7050f915c0c17a603a0a2ddf00e6edcc188789d3 Mon Sep 17 00:00:00 2001
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
Date: Thu, 17 Feb 2011 09:55:03 -0800
Subject: omap2plus: omap4: Set NR_CPU to 2 instead of default 4

The omap2plus_defconfig picks default NR_CPU value as 4 which isn't
correct for OMAP4430. Available CPUs are ony 2, so fix the same.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/configs/omap2plus_defconfig | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index ae890caa17a..019fb7c67dc 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -58,6 +58,7 @@ CONFIG_ARM_ERRATA_411920=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_SMP=y
+CONFIG_NR_CPUS=2
 # CONFIG_LOCAL_TIMERS is not set
 CONFIG_AEABI=y
 CONFIG_LEDS=y
-- 
cgit v1.2.3-18-g5258


From b9b35ade88d5855de0ac3ebc3d66881f799114f9 Mon Sep 17 00:00:00 2001
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
Date: Thu, 17 Feb 2011 09:55:03 -0800
Subject: omap4: Remove 'FIXME: omap44xx_sram_init not implemented'

The omap44xx_sram_init() implements functionality to push some
code on SRAM whenever the code can't be executed from external
memory. The low power and DVFS code can be executed from
external DDR itself thanks to OMAP4  memory controller hardware
support. So on OMAP4, sram_push kind of functionality isn't needed.

Hence remove the FIXME warning added for implementing sram push
feature on OMAP4.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/sram.c | 16 ----------------
 1 file changed, 16 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index aedcb3be4e6..9d80064e979 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -405,20 +405,6 @@ static inline int omap34xx_sram_init(void)
 }
 #endif
 
-#ifdef CONFIG_ARCH_OMAP4
-static int __init omap44xx_sram_init(void)
-{
-	printk(KERN_ERR "FIXME: %s not implemented\n", __func__);
-
-	return -ENODEV;
-}
-#else
-static inline int omap44xx_sram_init(void)
-{
-	return 0;
-}
-#endif
-
 int __init omap_sram_init(void)
 {
 	omap_detect_sram();
@@ -432,8 +418,6 @@ int __init omap_sram_init(void)
 		omap243x_sram_init();
 	else if (cpu_is_omap34xx())
 		omap34xx_sram_init();
-	else if (cpu_is_omap44xx())
-		omap44xx_sram_init();
 
 	return 0;
 }
-- 
cgit v1.2.3-18-g5258


From 59556765cd30467ff64a391906ad8eb68f886ad3 Mon Sep 17 00:00:00 2001
From: Syed Rafiuddin <rafiuddin.syed@ti.com>
Date: Mon, 27 Dec 2010 05:51:45 +0000
Subject: OMAP4: keypad: Add the board support

-Add the platform changes for the keypad driver
-Register keyboard device with hwmod framework.

Signed-off-by: Syed Rafiuddin <rafiuddin.syed@ti.com>
Signed-off-by: Abraham Arce <x0066660@ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-4430sdp.c | 89 +++++++++++++++++++++++++++++++++++++
 arch/arm/mach-omap2/devices.c       | 41 +++++++++++++++++
 2 files changed, 130 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 12d99e582cd..dcc8b27e303 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -35,6 +35,7 @@
 #include <plat/common.h>
 #include <plat/usb.h>
 #include <plat/mmc.h>
+#include <plat/omap4-keypad.h>
 
 #include "mux.h"
 #include "hsmmc.h"
@@ -48,6 +49,90 @@
 #define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO	184
 #define OMAP4_SFH7741_ENABLE_GPIO		188
 
+static const int sdp4430_keymap[] = {
+	KEY(0, 0, KEY_E),
+	KEY(0, 1, KEY_R),
+	KEY(0, 2, KEY_T),
+	KEY(0, 3, KEY_HOME),
+	KEY(0, 4, KEY_F5),
+	KEY(0, 5, KEY_UNKNOWN),
+	KEY(0, 6, KEY_I),
+	KEY(0, 7, KEY_LEFTSHIFT),
+
+	KEY(1, 0, KEY_D),
+	KEY(1, 1, KEY_F),
+	KEY(1, 2, KEY_G),
+	KEY(1, 3, KEY_SEND),
+	KEY(1, 4, KEY_F6),
+	KEY(1, 5, KEY_UNKNOWN),
+	KEY(1, 6, KEY_K),
+	KEY(1, 7, KEY_ENTER),
+
+	KEY(2, 0, KEY_X),
+	KEY(2, 1, KEY_C),
+	KEY(2, 2, KEY_V),
+	KEY(2, 3, KEY_END),
+	KEY(2, 4, KEY_F7),
+	KEY(2, 5, KEY_UNKNOWN),
+	KEY(2, 6, KEY_DOT),
+	KEY(2, 7, KEY_CAPSLOCK),
+
+	KEY(3, 0, KEY_Z),
+	KEY(3, 1, KEY_KPPLUS),
+	KEY(3, 2, KEY_B),
+	KEY(3, 3, KEY_F1),
+	KEY(3, 4, KEY_F8),
+	KEY(3, 5, KEY_UNKNOWN),
+	KEY(3, 6, KEY_O),
+	KEY(3, 7, KEY_SPACE),
+
+	KEY(4, 0, KEY_W),
+	KEY(4, 1, KEY_Y),
+	KEY(4, 2, KEY_U),
+	KEY(4, 3, KEY_F2),
+	KEY(4, 4, KEY_VOLUMEUP),
+	KEY(4, 5, KEY_UNKNOWN),
+	KEY(4, 6, KEY_L),
+	KEY(4, 7, KEY_LEFT),
+
+	KEY(5, 0, KEY_S),
+	KEY(5, 1, KEY_H),
+	KEY(5, 2, KEY_J),
+	KEY(5, 3, KEY_F3),
+	KEY(5, 4, KEY_F9),
+	KEY(5, 5, KEY_VOLUMEDOWN),
+	KEY(5, 6, KEY_M),
+	KEY(5, 7, KEY_RIGHT),
+
+	KEY(6, 0, KEY_Q),
+	KEY(6, 1, KEY_A),
+	KEY(6, 2, KEY_N),
+	KEY(6, 3, KEY_BACK),
+	KEY(6, 4, KEY_BACKSPACE),
+	KEY(6, 5, KEY_UNKNOWN),
+	KEY(6, 6, KEY_P),
+	KEY(6, 7, KEY_UP),
+
+	KEY(7, 0, KEY_PROG1),
+	KEY(7, 1, KEY_PROG2),
+	KEY(7, 2, KEY_PROG3),
+	KEY(7, 3, KEY_PROG4),
+	KEY(7, 4, KEY_F4),
+	KEY(7, 5, KEY_UNKNOWN),
+	KEY(7, 6, KEY_OK),
+	KEY(7, 7, KEY_DOWN),
+};
+
+static struct matrix_keymap_data sdp4430_keymap_data = {
+	.keymap			= sdp4430_keymap,
+	.keymap_size		= ARRAY_SIZE(sdp4430_keymap),
+};
+
+static struct omap4_keypad_platform_data sdp4430_keypad_data = {
+	.keymap_data		= &sdp4430_keymap_data,
+	.rows			= 8,
+	.cols			= 8,
+};
 static struct gpio_led sdp4430_gpio_leds[] = {
 	{
 		.name	= "omap4:green:debug0",
@@ -593,6 +678,10 @@ static void __init omap_4430sdp_init(void)
 		spi_register_board_info(sdp4430_spi_board_info,
 				ARRAY_SIZE(sdp4430_spi_board_info));
 	}
+
+	status = omap4_keyboard_init(&sdp4430_keypad_data);
+	if (status)
+		pr_err("Keypad initialization failed: %d\n", status);
 }
 
 static void __init omap_4430sdp_map_io(void)
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index e0f0ef952bc..8800486f946 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -30,6 +30,7 @@
 #include <plat/dma.h>
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
+#include <plat/omap4-keypad.h>
 
 #include "mux.h"
 #include "control.h"
@@ -141,6 +142,46 @@ static inline void omap_init_camera(void)
 }
 #endif
 
+struct omap_device_pm_latency omap_keyboard_latency[] = {
+	{
+		.deactivate_func = omap_device_idle_hwmods,
+		.activate_func   = omap_device_enable_hwmods,
+		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+	},
+};
+
+int __init omap4_keyboard_init(struct omap4_keypad_platform_data
+						*sdp4430_keypad_data)
+{
+	struct omap_device *od;
+	struct omap_hwmod *oh;
+	struct omap4_keypad_platform_data *keypad_data;
+	unsigned int id = -1;
+	char *oh_name = "kbd";
+	char *name = "omap4-keypad";
+
+	oh = omap_hwmod_lookup(oh_name);
+	if (!oh) {
+		pr_err("Could not look up %s\n", oh_name);
+		return -ENODEV;
+	}
+
+	keypad_data = sdp4430_keypad_data;
+
+	od = omap_device_build(name, id, oh, keypad_data,
+			sizeof(struct omap4_keypad_platform_data),
+			omap_keyboard_latency,
+			ARRAY_SIZE(omap_keyboard_latency), 0);
+
+	if (IS_ERR(od)) {
+		WARN(1, "Cant build omap_device for %s:%s.\n",
+						name, oh->name);
+		return PTR_ERR(od);
+	}
+
+	return 0;
+}
+
 #if defined(CONFIG_OMAP_MBOX_FWK) || defined(CONFIG_OMAP_MBOX_FWK_MODULE)
 
 #define MBOX_REG_SIZE   0x120
-- 
cgit v1.2.3-18-g5258


From 741927f753a41c644840589a382a1d3500f86206 Mon Sep 17 00:00:00 2001
From: Eyal Reizer <eyalr@ti.com>
Date: Thu, 27 Jan 2011 09:49:49 +0000
Subject: omap3evm: add support for the WL12xx WLAN module to the AM/DM3xx
 Evaluation Module

Adds platform initialization for working with the WLAN module attached to the evaluation module.
The patch includes MMC2 initialization, SDIO and control pins muxing and platform device registration

Signed-off-by: Eyal Reizer <eyalr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-omap3evm.c | 78 ++++++++++++++++++++++++++++++++++++
 1 file changed, 78 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index c2a0fca4aa5..ac50bf94944 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -30,6 +30,8 @@
 #include <linux/usb/otg.h>
 #include <linux/smsc911x.h>
 
+#include <linux/wl12xx.h>
+#include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/mmc/host.h>
 
@@ -381,6 +383,16 @@ static struct omap2_hsmmc_info mmc[] = {
 		.gpio_cd	= -EINVAL,
 		.gpio_wp	= 63,
 	},
+#ifdef CONFIG_WL12XX_PLATFORM_DATA
+	{
+		.name		= "wl1271",
+		.mmc            = 2,
+		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
+		.gpio_wp	= -EINVAL,
+		.gpio_cd	= -EINVAL,
+		.nonremovable	= true,
+	},
+#endif
 	{}	/* Terminator */
 };
 
@@ -538,6 +550,50 @@ static struct regulator_init_data omap3_evm_vpll2 = {
 	.consumer_supplies	= &omap3_evm_vpll2_supply,
 };
 
+#ifdef CONFIG_WL12XX_PLATFORM_DATA
+
+#define OMAP3EVM_WLAN_PMENA_GPIO	(150)
+#define OMAP3EVM_WLAN_IRQ_GPIO		(149)
+
+static struct regulator_consumer_supply omap3evm_vmmc2_supply = {
+	.supply			= "vmmc",
+	.dev_name		= "mmci-omap-hs.1",
+};
+
+/* VMMC2 for driving the WL12xx module */
+static struct regulator_init_data omap3evm_vmmc2 = {
+	.constraints = {
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies = &omap3evm_vmmc2_supply,
+};
+
+static struct fixed_voltage_config omap3evm_vwlan = {
+	.supply_name		= "vwl1271",
+	.microvolts		= 1800000, /* 1.80V */
+	.gpio			= OMAP3EVM_WLAN_PMENA_GPIO,
+	.startup_delay		= 70000, /* 70ms */
+	.enable_high		= 1,
+	.enabled_at_boot	= 0,
+	.init_data		= &omap3evm_vmmc2,
+};
+
+static struct platform_device omap3evm_vwlan_device = {
+	.name		= "reg-fixed-voltage",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &omap3evm_vwlan,
+	},
+};
+
+struct wl12xx_platform_data omap3evm_wlan_data __initdata = {
+	.irq = OMAP_GPIO_IRQ(OMAP3EVM_WLAN_IRQ_GPIO),
+	/* ref clock is 38.4 MHz */
+	.board_ref_clock = 2,
+};
+#endif
+
 static struct twl4030_platform_data omap3evm_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
@@ -657,6 +713,21 @@ static struct omap_board_mux board_mux[] __initdata = {
 				OMAP_PIN_OFF_WAKEUPENABLE),
 	OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
 				OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW),
+#ifdef CONFIG_WL12XX_PLATFORM_DATA
+	/* WLAN IRQ - GPIO 149 */
+	OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
+
+	/* WLAN POWER ENABLE - GPIO 150 */
+	OMAP3_MUX(UART1_CTS, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+
+	/* MMC2 SDIO pin muxes for WL12xx */
+	OMAP3_MUX(SDMMC2_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+	OMAP3_MUX(SDMMC2_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+	OMAP3_MUX(SDMMC2_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+	OMAP3_MUX(SDMMC2_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+	OMAP3_MUX(SDMMC2_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+	OMAP3_MUX(SDMMC2_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+#endif
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 #endif
@@ -714,6 +785,13 @@ static void __init omap3_evm_init(void)
 	ads7846_dev_init();
 	omap3evm_init_smsc911x();
 	omap3_evm_display_init();
+
+#ifdef CONFIG_WL12XX_PLATFORM_DATA
+	/* WL12xx WLAN Init */
+	if (wl12xx_set_platform_data(&omap3evm_wlan_data))
+		pr_err("error setting wl12xx data\n");
+	platform_device_register(&omap3evm_vwlan_device);
+#endif
 }
 
 MACHINE_START(OMAP3EVM, "OMAP3 EVM")
-- 
cgit v1.2.3-18-g5258


From 9bc64b89cd730a09b02c66af730229e0abc9e2bb Mon Sep 17 00:00:00 2001
From: Vaibhav Hiremath <hvaibhav@ti.com>
Date: Mon, 24 Jan 2011 19:25:55 +0000
Subject: OMAP3EVM: Reset the smsc911x ethernet controller in board_init

With addition of hwmod support to gpio, the ethernet controller
goes undetected for OMAP35xEVM. So explicitly assert the reset signal to
ethernet controller smsc911x -

	- GPIO7 (>=RevG version of EVM's)
	- GPIO64 (<=RevD version of EVM's)

Tested this patch on RevG version of EVM with ES3.1 Si.

This patch is based on intial version from Charulatha V, reference
to original discussion -
http://www.mail-archive.com/linux-omap@vger.kernel.org/msg35784.html

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-omap3evm.c | 39 +++++++++++++++++++++++++++++++++++-
 1 file changed, 38 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index ac50bf94944..b9f954e839d 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -60,6 +60,13 @@
 #define OMAP3EVM_ETHR_ID_REV	0x50
 #define OMAP3EVM_ETHR_GPIO_IRQ	176
 #define OMAP3EVM_SMSC911X_CS	5
+/*
+ * Eth Reset signal
+ *	64 = Generation 1 (<=RevD)
+ *	7 = Generation 2 (>=RevE)
+ */
+#define OMAP3EVM_GEN1_ETHR_GPIO_RST	64
+#define OMAP3EVM_GEN2_ETHR_GPIO_RST	7
 
 static u8 omap3_evm_version;
 
@@ -126,10 +133,15 @@ static struct platform_device omap3evm_smsc911x_device = {
 
 static inline void __init omap3evm_init_smsc911x(void)
 {
-	int eth_cs;
+	int eth_cs, eth_rst;
 	struct clk *l3ck;
 	unsigned int rate;
 
+	if (get_omap3_evm_rev() == OMAP3EVM_BOARD_GEN_1)
+		eth_rst = OMAP3EVM_GEN1_ETHR_GPIO_RST;
+	else
+		eth_rst = OMAP3EVM_GEN2_ETHR_GPIO_RST;
+
 	eth_cs = OMAP3EVM_SMSC911X_CS;
 
 	l3ck = clk_get(NULL, "l3_ck");
@@ -138,6 +150,27 @@ static inline void __init omap3evm_init_smsc911x(void)
 	else
 		rate = clk_get_rate(l3ck);
 
+	/* Configure ethernet controller reset gpio */
+	if (cpu_is_omap3430()) {
+		if (gpio_request(eth_rst, "SMSC911x gpio") < 0) {
+			pr_err(KERN_ERR "Failed to request %d for smsc911x\n",
+					eth_rst);
+			return;
+		}
+
+		if (gpio_direction_output(eth_rst, 1) < 0) {
+			pr_err(KERN_ERR "Failed to set direction of %d for" \
+					" smsc911x\n", eth_rst);
+			return;
+		}
+		/* reset pulse to ethernet controller*/
+		usleep_range(150, 220);
+		gpio_set_value(eth_rst, 0);
+		usleep_range(150, 220);
+		gpio_set_value(eth_rst, 1);
+		usleep_range(1, 2);
+	}
+
 	if (gpio_request(OMAP3EVM_ETHR_GPIO_IRQ, "SMSC911x irq") < 0) {
 		printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n",
 			OMAP3EVM_ETHR_GPIO_IRQ);
@@ -713,6 +746,10 @@ static struct omap_board_mux board_mux[] __initdata = {
 				OMAP_PIN_OFF_WAKEUPENABLE),
 	OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
 				OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW),
+	OMAP3_MUX(SYS_BOOT5, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
+				OMAP_PIN_OFF_NONE),
+	OMAP3_MUX(GPMC_WAIT2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
+				OMAP_PIN_OFF_NONE),
 #ifdef CONFIG_WL12XX_PLATFORM_DATA
 	/* WLAN IRQ - GPIO 149 */
 	OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
-- 
cgit v1.2.3-18-g5258


From f186e9b24f84e771124c6ee47e19dac5de35f987 Mon Sep 17 00:00:00 2001
From: Vaibhav Hiremath <hvaibhav@ti.com>
Date: Tue, 25 Jan 2011 17:37:37 +0000
Subject: omap3evm: Change TWL related gpio API's to gpio*_cansleep

Since TWL GPIO's can go into sleep, and using normal
gpio_get/set_value() API will lead to kernel dump (WARN_ON()).
So replacing standard gpio_get/set_value() to
gpio_get/set_value_cansleep().

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Reviewed-by: Charulatha V <charu@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-omap3evm.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index b9f954e839d..80c9f8a7d05 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -270,9 +270,9 @@ static int omap3_evm_enable_lcd(struct omap_dss_device *dssdev)
 	gpio_set_value(OMAP3EVM_LCD_PANEL_ENVDD, 0);
 
 	if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
-		gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0);
+		gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0);
 	else
-		gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1);
+		gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1);
 
 	lcd_enabled = 1;
 	return 0;
@@ -283,9 +283,9 @@ static void omap3_evm_disable_lcd(struct omap_dss_device *dssdev)
 	gpio_set_value(OMAP3EVM_LCD_PANEL_ENVDD, 1);
 
 	if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
-		gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1);
+		gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1);
 	else
-		gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0);
+		gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0);
 
 	lcd_enabled = 0;
 }
@@ -324,7 +324,7 @@ static int omap3_evm_enable_dvi(struct omap_dss_device *dssdev)
 		return -EINVAL;
 	}
 
-	gpio_set_value(OMAP3EVM_DVI_PANEL_EN_GPIO, 1);
+	gpio_set_value_cansleep(OMAP3EVM_DVI_PANEL_EN_GPIO, 1);
 
 	dvi_enabled = 1;
 	return 0;
@@ -332,7 +332,7 @@ static int omap3_evm_enable_dvi(struct omap_dss_device *dssdev)
 
 static void omap3_evm_disable_dvi(struct omap_dss_device *dssdev)
 {
-	gpio_set_value(OMAP3EVM_DVI_PANEL_EN_GPIO, 0);
+	gpio_set_value_cansleep(OMAP3EVM_DVI_PANEL_EN_GPIO, 0);
 
 	dvi_enabled = 0;
 }
-- 
cgit v1.2.3-18-g5258


From 410491d408ee98a31c6eeff5072ae0c13e0a2324 Mon Sep 17 00:00:00 2001
From: Vaibhav Hiremath <hvaibhav@ti.com>
Date: Tue, 25 Jan 2011 17:37:38 +0000
Subject: OMAP3EVM: Add vio regulator supply required for ads7846 TSC driver

Add vio regulator supply, needed for ads7846 touchscreen controller
driver.

Tested on OMAP3 (ES3.1 Si) RevG version of EVM.

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-omap3evm.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 80c9f8a7d05..bbdf3ad299c 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -583,6 +583,25 @@ static struct regulator_init_data omap3_evm_vpll2 = {
 	.consumer_supplies	= &omap3_evm_vpll2_supply,
 };
 
+/* ads7846 on SPI */
+static struct regulator_consumer_supply omap3evm_vio_supply =
+	REGULATOR_SUPPLY("vcc", "spi1.0");
+
+/* VIO for ads7846 */
+static struct regulator_init_data omap3evm_vio = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &omap3evm_vio_supply,
+};
+
 #ifdef CONFIG_WL12XX_PLATFORM_DATA
 
 #define OMAP3EVM_WLAN_PMENA_GPIO	(150)
@@ -639,6 +658,7 @@ static struct twl4030_platform_data omap3evm_twldata = {
 	.codec		= &omap3evm_codec_data,
 	.vdac		= &omap3_evm_vdac,
 	.vpll2		= &omap3_evm_vpll2,
+	.vio		= &omap3evm_vio,
 };
 
 static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = {
-- 
cgit v1.2.3-18-g5258


From 904c545c22dc4926e73c5c869efed0ca6a778bda Mon Sep 17 00:00:00 2001
From: Vaibhav Hiremath <hvaibhav@ti.com>
Date: Tue, 25 Jan 2011 17:37:39 +0000
Subject: AM/DM37x: DSS mux configuration for >Rev-B processor cards

To support higher resolution (e.g 720P@60), on OMAP36x (AM/DM37x)
DSS data bus has been muxed with sys_boot pins.

DSS[18-23] => DSS[0-5]
sys_boot[0,1 3-5] => DSS[18-23]

EVM revision >=RevB adopt this mux changes, which is going to ship outside.

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-omap3evm.c | 34 ++++++++++++++++++++++++++++++++--
 1 file changed, 32 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index bbdf3ad299c..36dac55b235 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -760,7 +760,7 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
 };
 
 #ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
+static struct omap_board_mux omap35x_board_mux[] __initdata = {
 	OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP |
 				OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
 				OMAP_PIN_OFF_WAKEUPENABLE),
@@ -787,6 +787,32 @@ static struct omap_board_mux board_mux[] __initdata = {
 #endif
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
+
+static struct omap_board_mux omap36x_board_mux[] __initdata = {
+	OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP |
+				OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
+				OMAP_PIN_OFF_WAKEUPENABLE),
+	OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
+				OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW),
+	/* AM/DM37x EVM: DSS data bus muxed with sys_boot */
+	OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
+	OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
+	OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
+	OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
+	OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
+	OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
+	OMAP3_MUX(SYS_BOOT0, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
+	OMAP3_MUX(SYS_BOOT1, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
+	OMAP3_MUX(SYS_BOOT3, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
+	OMAP3_MUX(SYS_BOOT4, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
+	OMAP3_MUX(SYS_BOOT5, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
+	OMAP3_MUX(SYS_BOOT6, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
+
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap35x_board_mux	NULL
+#define omap36x_board_mux	NULL
 #endif
 
 static struct omap_musb_board_data musb_board_data = {
@@ -798,7 +824,11 @@ static struct omap_musb_board_data musb_board_data = {
 static void __init omap3_evm_init(void)
 {
 	omap3_evm_get_revision();
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+
+	if (cpu_is_omap3630())
+		omap3_mux_init(omap36x_board_mux, OMAP_PACKAGE_CBB);
+	else
+		omap3_mux_init(omap35x_board_mux, OMAP_PACKAGE_CBB);
 
 	omap3_evm_i2c_init();
 
-- 
cgit v1.2.3-18-g5258


From 42fc8cab020c4d848a969b7c0a80b591c35bb263 Mon Sep 17 00:00:00 2001
From: Vaibhav Hiremath <hvaibhav@ti.com>
Date: Tue, 25 Jan 2011 17:37:40 +0000
Subject: OMAP3EVM: Made backlight GPIO default state to off

If you choose default output to DVI, the LCD backlight used to
stay on, since panel->disable function never gets called.

So, during init put backlight GPIO to off state and the driver
code will decide which output to enable.

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-omap3evm.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 36dac55b235..4f2574c35dd 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -456,6 +456,8 @@ static struct platform_device leds_gpio = {
 static int omap3evm_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
+	int r;
+
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
 	omap_mux_init_gpio(63, OMAP_PIN_INPUT);
 	mmc[0].gpio_cd = gpio + 0;
@@ -471,8 +473,12 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
 	 */
 
 	/* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */
-	gpio_request(gpio + TWL4030_GPIO_MAX, "EN_LCD_BKL");
-	gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
+	r = gpio_request(gpio + TWL4030_GPIO_MAX, "EN_LCD_BKL");
+	if (!r)
+		r = gpio_direction_output(gpio + TWL4030_GPIO_MAX,
+			(get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) ? 1 : 0);
+	if (r)
+		printk(KERN_ERR "failed to get/set lcd_bkl gpio\n");
 
 	/* gpio + 7 == DVI Enable */
 	gpio_request(gpio + 7, "EN_DVI");
-- 
cgit v1.2.3-18-g5258


From 854c122f54d0074afb9e9a8f2ab7d6258c1f218f Mon Sep 17 00:00:00 2001
From: Vaibhav Hiremath <hvaibhav@ti.com>
Date: Tue, 25 Jan 2011 17:37:41 +0000
Subject: OMAP3EVM: Set TSC wakeup option in pad config

Set OMAP_PIN_OFF_WAKEUPENABLE to enable the wake-up
functionality from touchscreen controller.

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-omap3evm.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 4f2574c35dd..d4a11571229 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -771,7 +771,8 @@ static struct omap_board_mux omap35x_board_mux[] __initdata = {
 				OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
 				OMAP_PIN_OFF_WAKEUPENABLE),
 	OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
-				OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW),
+				OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
+				OMAP_PIN_OFF_WAKEUPENABLE),
 	OMAP3_MUX(SYS_BOOT5, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
 				OMAP_PIN_OFF_NONE),
 	OMAP3_MUX(GPMC_WAIT2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
@@ -799,7 +800,8 @@ static struct omap_board_mux omap36x_board_mux[] __initdata = {
 				OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
 				OMAP_PIN_OFF_WAKEUPENABLE),
 	OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
-				OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW),
+				OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
+				OMAP_PIN_OFF_WAKEUPENABLE),
 	/* AM/DM37x EVM: DSS data bus muxed with sys_boot */
 	OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
 	OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-- 
cgit v1.2.3-18-g5258


From d5ce2b6592c49935462cba7317fa67fe8ee474ec Mon Sep 17 00:00:00 2001
From: Sukumar Ghorai <s-ghorai@ti.com>
Date: Fri, 28 Jan 2011 15:42:03 +0530
Subject: omap3630: nand: fix device size to work in polled mode

zoom3 and 3630-sdp having the x16 nand device.
This patch configure gpmc as x16 and select the currect function in driver
for polled mode (without prefetch enable) transfer.

Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-3430sdp.c |  2 +-
 arch/arm/mach-omap2/board-3630sdp.c |  3 ++-
 arch/arm/mach-omap2/board-flash.c   | 10 ++++++----
 arch/arm/mach-omap2/board-flash.h   |  4 ++--
 arch/arm/mach-omap2/board-ldp.c     |  2 +-
 arch/arm/mach-omap2/board-zoom.c    |  5 +++--
 arch/arm/mach-omap2/gpmc-nand.c     |  7 +++++--
 7 files changed, 20 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 31085883199..4a37c70e38b 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -812,7 +812,7 @@ static void __init omap_3430sdp_init(void)
 	omap_serial_init();
 	usb_musb_init(&musb_board_data);
 	board_smc91x_init();
-	board_flash_init(sdp_flash_partitions, chip_sel_3430);
+	board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);
 	sdp3430_display_init();
 	enable_board_wakeup_source();
 	usb_ehci_init(&ehci_pdata);
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index 16538757291..8d1c4358ecf 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -11,6 +11,7 @@
 #include <linux/platform_device.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
+#include <linux/mtd/nand.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -208,7 +209,7 @@ static void __init omap_sdp_init(void)
 	zoom_peripherals_init();
 	zoom_display_init();
 	board_smc91x_init();
-	board_flash_init(sdp_flash_partitions, chip_sel_sdp);
+	board_flash_init(sdp_flash_partitions, chip_sel_sdp, NAND_BUSWIDTH_16);
 	enable_board_wakeup_source();
 	usb_ehci_init(&ehci_pdata);
 }
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index fd38c05bb47..f6b72533c08 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -139,11 +139,13 @@ static struct omap_nand_platform_data board_nand_data = {
 };
 
 void
-__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs)
+__init board_nand_init(struct mtd_partition *nand_parts,
+			u8 nr_parts, u8 cs, int nand_type)
 {
 	board_nand_data.cs		= cs;
 	board_nand_data.parts		= nand_parts;
-	board_nand_data.nr_parts		= nr_parts;
+	board_nand_data.nr_parts	= nr_parts;
+	board_nand_data.devsize		= nand_type;
 
 	gpmc_nand_init(&board_nand_data);
 }
@@ -194,7 +196,7 @@ unmap:
  * @return - void.
  */
 void board_flash_init(struct flash_partitions partition_info[],
-					char chip_sel_board[][GPMC_CS_NUM])
+			char chip_sel_board[][GPMC_CS_NUM], int nand_type)
 {
 	u8		cs = 0;
 	u8		norcs = GPMC_CS_NUM + 1;
@@ -250,5 +252,5 @@ void board_flash_init(struct flash_partitions partition_info[],
 				"in GPMC\n");
 	else
 		board_nand_init(partition_info[2].parts,
-				partition_info[2].nr_parts, nandcs);
+			partition_info[2].nr_parts, nandcs, nand_type);
 }
diff --git a/arch/arm/mach-omap2/board-flash.h b/arch/arm/mach-omap2/board-flash.h
index 69befe00dd2..c240a3f8d16 100644
--- a/arch/arm/mach-omap2/board-flash.h
+++ b/arch/arm/mach-omap2/board-flash.h
@@ -25,6 +25,6 @@ struct flash_partitions {
 };
 
 extern void board_flash_init(struct flash_partitions [],
-				char chip_sel[][GPMC_CS_NUM]);
+				char chip_sel[][GPMC_CS_NUM], int nand_type);
 extern void board_nand_init(struct mtd_partition *nand_parts,
-					u8 nr_parts, u8 cs);
+					u8 nr_parts, u8 cs, int nand_type);
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index d8eb2cb7cbc..a3fae5697a7 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -433,7 +433,7 @@ static void __init omap_ldp_init(void)
 	omap_serial_init();
 	usb_musb_init(&musb_board_data);
 	board_nand_init(ldp_nand_partitions,
-		ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS);
+		ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0);
 
 	omap2_hsmmc_init(mmc);
 	/* link regulators to MMC adapters */
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index 85d4170f30a..7e3f1595d77 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -16,6 +16,7 @@
 #include <linux/input.h>
 #include <linux/gpio.h>
 #include <linux/i2c/twl.h>
+#include <linux/mtd/nand.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -124,8 +125,8 @@ static void __init omap_zoom_init(void)
 		usb_ehci_init(&ehci_pdata);
 	}
 
-	board_nand_init(zoom_nand_partitions,
-			ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS);
+	board_nand_init(zoom_nand_partitions, ARRAY_SIZE(zoom_nand_partitions),
+						ZOOM_NAND_CS, NAND_BUSWIDTH_16);
 	zoom_debugboard_init();
 	zoom_peripherals_init();
 	zoom_display_init();
diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
index 2bb29c16070..c1791d08ae5 100644
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -12,6 +12,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/mtd/nand.h>
 
 #include <asm/mach/flash.h>
 
@@ -69,8 +70,10 @@ static int omap2_nand_gpmc_retime(void)
 	t.wr_cycle  = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->wr_cycle);
 
 	/* Configure GPMC */
-	gpmc_cs_configure(gpmc_nand_data->cs,
-				GPMC_CONFIG_DEV_SIZE, gpmc_nand_data->devsize);
+	if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16)
+		gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_SIZE, 1);
+	else
+		gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_SIZE, 0);
 	gpmc_cs_configure(gpmc_nand_data->cs,
 			GPMC_CONFIG_DEV_TYPE, GPMC_DEVICETYPE_NAND);
 	err = gpmc_cs_set_timings(gpmc_nand_data->cs, &t);
-- 
cgit v1.2.3-18-g5258


From 1b0b323c70cd5fdca967d89ed3a03dfebd84ada7 Mon Sep 17 00:00:00 2001
From: Sukumar Ghorai <s-ghorai@ti.com>
Date: Fri, 28 Jan 2011 15:42:04 +0530
Subject: omap3: nand: configurable transfer type per board

nand transfer type (sDMA, Polled, prefetch) can be select from board file,
enabling all transfer type in driver, by default.

this helps in multi-omap build and to select different transfer type for
different board.

Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/include/plat/nand.h | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/include/plat/nand.h b/arch/arm/plat-omap/include/plat/nand.h
index 6562cd082bb..78c0bdb98c1 100644
--- a/arch/arm/plat-omap/include/plat/nand.h
+++ b/arch/arm/plat-omap/include/plat/nand.h
@@ -10,6 +10,12 @@
 
 #include <linux/mtd/partitions.h>
 
+enum nand_io {
+	NAND_OMAP_PREFETCH_POLLED = 0,	/* prefetch polled mode, default */
+	NAND_OMAP_POLLED,		/* polled mode, without prefetch */
+	NAND_OMAP_PREFETCH_DMA		/* prefetch enabled sDMA mode */
+};
+
 struct omap_nand_platform_data {
 	unsigned int		options;
 	int			cs;
@@ -20,6 +26,7 @@ struct omap_nand_platform_data {
 	int			(*nand_setup)(void);
 	int			(*dev_ready)(struct omap_nand_platform_data *);
 	int			dma_channel;
+	enum nand_io		xfer_type;
 	unsigned long		phys_base;
 	int			devsize;
 };
-- 
cgit v1.2.3-18-g5258


From db97eb7dfe13f6c04f0a0e77c32e2691f563ab8b Mon Sep 17 00:00:00 2001
From: Sukumar Ghorai <s-ghorai@ti.com>
Date: Fri, 28 Jan 2011 15:42:05 +0530
Subject: omap: gpmc: enable irq mode in gpmc

add support the irq mode in GPMC.
gpmc_init() function move after omap_init_irq() as it has dependecy on irq.

Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/gpmc.c             | 45 +++++++++++++++++++++++++++++++---
 arch/arm/mach-omap2/io.c               |  2 --
 arch/arm/plat-omap/include/plat/gpmc.h |  5 +++-
 arch/arm/plat-omap/include/plat/irqs.h |  9 ++++++-
 4 files changed, 54 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 1b7b3e7d02f..382dea83e4f 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -14,6 +14,7 @@
  */
 #undef DEBUG
 
+#include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/err.h>
@@ -22,6 +23,7 @@
 #include <linux/spinlock.h>
 #include <linux/io.h>
 #include <linux/module.h>
+#include <linux/interrupt.h>
 
 #include <asm/mach-types.h>
 #include <plat/gpmc.h>
@@ -100,6 +102,8 @@ static void __iomem *gpmc_base;
 
 static struct clk *gpmc_l3_clk;
 
+static irqreturn_t gpmc_handle_irq(int irq, void *dev);
+
 static void gpmc_write_reg(int idx, u32 val)
 {
 	__raw_writel(val, gpmc_base + idx);
@@ -497,6 +501,10 @@ int gpmc_cs_configure(int cs, int cmd, int wval)
 	u32 regval = 0;
 
 	switch (cmd) {
+	case GPMC_ENABLE_IRQ:
+		gpmc_write_reg(GPMC_IRQENABLE, wval);
+		break;
+
 	case GPMC_SET_IRQ_STATUS:
 		gpmc_write_reg(GPMC_IRQSTATUS, wval);
 		break;
@@ -678,9 +686,10 @@ static void __init gpmc_mem_init(void)
 	}
 }
 
-void __init gpmc_init(void)
+static int __init gpmc_init(void)
 {
-	u32 l;
+	u32 l, irq;
+	int cs, ret = -EINVAL;
 	char *ck = NULL;
 
 	if (cpu_is_omap24xx()) {
@@ -698,7 +707,7 @@ void __init gpmc_init(void)
 	}
 
 	if (WARN_ON(!ck))
-		return;
+		return ret;
 
 	gpmc_l3_clk = clk_get(NULL, ck);
 	if (IS_ERR(gpmc_l3_clk)) {
@@ -723,6 +732,36 @@ void __init gpmc_init(void)
 	l |= (0x02 << 3) | (1 << 0);
 	gpmc_write_reg(GPMC_SYSCONFIG, l);
 	gpmc_mem_init();
+
+	/* initalize the irq_chained */
+	irq = OMAP_GPMC_IRQ_BASE;
+	for (cs = 0; cs < GPMC_CS_NUM; cs++) {
+		set_irq_handler(irq, handle_simple_irq);
+		set_irq_flags(irq, IRQF_VALID);
+		irq++;
+	}
+
+	ret = request_irq(INT_34XX_GPMC_IRQ,
+			gpmc_handle_irq, IRQF_SHARED, "gpmc", gpmc_base);
+	if (ret)
+		pr_err("gpmc: irq-%d could not claim: err %d\n",
+						INT_34XX_GPMC_IRQ, ret);
+	return ret;
+}
+postcore_initcall(gpmc_init);
+
+static irqreturn_t gpmc_handle_irq(int irq, void *dev)
+{
+	u8 cs;
+
+	if (irq != INT_34XX_GPMC_IRQ)
+		return IRQ_HANDLED;
+	/* check cs to invoke the irq */
+	cs = ((gpmc_read_reg(GPMC_PREFETCH_CONFIG1)) >> CS_NUM_SHIFT) & 0x7;
+	if (OMAP_GPMC_IRQ_BASE+cs <= OMAP_GPMC_IRQ_END)
+		generic_handle_irq(OMAP_GPMC_IRQ_BASE+cs);
+
+	return IRQ_HANDLED;
 }
 
 #ifdef CONFIG_ARCH_OMAP3
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index b8b49e4ae92..657f3c84687 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -30,7 +30,6 @@
 
 #include <plat/sram.h>
 #include <plat/sdrc.h>
-#include <plat/gpmc.h>
 #include <plat/serial.h>
 
 #include "clock2xxx.h"
@@ -422,7 +421,6 @@ void __init omap2_init_common_devices(struct omap_sdrc_params *sdrc_cs0,
 		omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
 		_omap2_init_reprogram_sdrc();
 	}
-	gpmc_init();
 
 	omap_irq_base_init();
 }
diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h
index 85ded598853..9c060da0a87 100644
--- a/arch/arm/plat-omap/include/plat/gpmc.h
+++ b/arch/arm/plat-omap/include/plat/gpmc.h
@@ -41,6 +41,8 @@
 #define GPMC_NAND_ADDRESS	0x0000000b
 #define GPMC_NAND_DATA		0x0000000c
 
+#define GPMC_ENABLE_IRQ		0x0000000d
+
 /* ECC commands */
 #define GPMC_ECC_READ		0 /* Reset Hardware ECC for read */
 #define GPMC_ECC_WRITE		1 /* Reset Hardware ECC for write */
@@ -78,6 +80,8 @@
 #define WR_RD_PIN_MONITORING		0x00600000
 #define GPMC_PREFETCH_STATUS_FIFO_CNT(val)	((val >> 24) & 0x7F)
 #define GPMC_PREFETCH_STATUS_COUNT(val)	(val & 0x00003fff)
+#define GPMC_IRQ_FIFOEVENTENABLE	0x01
+#define GPMC_IRQ_COUNT_EVENT		0x02
 
 /*
  * Note that all values in this struct are in nanoseconds except sync_clk
@@ -135,7 +139,6 @@ extern int gpmc_prefetch_enable(int cs, int dma_mode,
 extern int gpmc_prefetch_reset(int cs);
 extern void omap3_gpmc_save_context(void);
 extern void omap3_gpmc_restore_context(void);
-extern void gpmc_init(void);
 extern int gpmc_read_status(int cmd);
 extern int gpmc_cs_configure(int cs, int cmd, int wval);
 extern int gpmc_nand_read(int cs, int cmd);
diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
index 2910de921c5..1b911681e91 100644
--- a/arch/arm/plat-omap/include/plat/irqs.h
+++ b/arch/arm/plat-omap/include/plat/irqs.h
@@ -318,6 +318,7 @@
 #define INT_34XX_PRCM_MPU_IRQ	11
 #define INT_34XX_MCBSP1_IRQ	16
 #define INT_34XX_MCBSP2_IRQ	17
+#define INT_34XX_GPMC_IRQ	20
 #define INT_34XX_MCBSP3_IRQ	22
 #define INT_34XX_MCBSP4_IRQ	23
 #define INT_34XX_CAM_IRQ	24
@@ -411,7 +412,13 @@
 #define TWL_IRQ_END		TWL6030_IRQ_END
 #endif
 
-#define NR_IRQS			TWL_IRQ_END
+/* GPMC related */
+#define OMAP_GPMC_IRQ_BASE	(TWL_IRQ_END)
+#define OMAP_GPMC_NR_IRQS	7
+#define OMAP_GPMC_IRQ_END	(OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS)
+
+
+#define NR_IRQS			OMAP_GPMC_IRQ_END
 
 #define OMAP_IRQ_BIT(irq)	(1 << ((irq) % 32))
 
-- 
cgit v1.2.3-18-g5258


From 4e070376165a9b7f245fada77645b81352c6ec78 Mon Sep 17 00:00:00 2001
From: Sukumar Ghorai <s-ghorai@ti.com>
Date: Fri, 28 Jan 2011 15:42:06 +0530
Subject: omap3: nand: prefetch in irq mode support

This patch enable prefetch-irq mode for nand transfer(read, write)

Signed-off-by: Vimal Singh <vimalsingh@ti.com>
Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-flash.c      | 2 ++
 arch/arm/plat-omap/include/plat/nand.h | 4 +++-
 2 files changed, 5 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index f6b72533c08..19645095d59 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -16,6 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <linux/io.h>
+#include <plat/irqs.h>
 
 #include <plat/gpmc.h>
 #include <plat/nand.h>
@@ -147,6 +148,7 @@ __init board_nand_init(struct mtd_partition *nand_parts,
 	board_nand_data.nr_parts	= nr_parts;
 	board_nand_data.devsize		= nand_type;
 
+	board_nand_data.gpmc_irq = OMAP_GPMC_IRQ_BASE + cs;
 	gpmc_nand_init(&board_nand_data);
 }
 #else
diff --git a/arch/arm/plat-omap/include/plat/nand.h b/arch/arm/plat-omap/include/plat/nand.h
index 78c0bdb98c1..ae5e0538303 100644
--- a/arch/arm/plat-omap/include/plat/nand.h
+++ b/arch/arm/plat-omap/include/plat/nand.h
@@ -13,7 +13,8 @@
 enum nand_io {
 	NAND_OMAP_PREFETCH_POLLED = 0,	/* prefetch polled mode, default */
 	NAND_OMAP_POLLED,		/* polled mode, without prefetch */
-	NAND_OMAP_PREFETCH_DMA		/* prefetch enabled sDMA mode */
+	NAND_OMAP_PREFETCH_DMA,		/* prefetch enabled sDMA mode */
+	NAND_OMAP_PREFETCH_IRQ		/* prefetch enabled irq mode */
 };
 
 struct omap_nand_platform_data {
@@ -26,6 +27,7 @@ struct omap_nand_platform_data {
 	int			(*nand_setup)(void);
 	int			(*dev_ready)(struct omap_nand_platform_data *);
 	int			dma_channel;
+	int			gpmc_irq;
 	enum nand_io		xfer_type;
 	unsigned long		phys_base;
 	int			devsize;
-- 
cgit v1.2.3-18-g5258


From 317379a975c07fe63bc4f86dabd668df96ff3df2 Mon Sep 17 00:00:00 2001
From: Sukumar Ghorai <s-ghorai@ti.com>
Date: Fri, 28 Jan 2011 15:42:07 +0530
Subject: omap3: nand: configurable fifo threshold to gain the throughput

Configure the FIFO THREASHOLD value different for read and write to keep busy
both filling and to drain out of FIFO at reading and writing.

Signed-off-by: Vimal Singh <vimalsingh@ti.com>
Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/gpmc.c             | 11 +++++++----
 arch/arm/plat-omap/include/plat/gpmc.h |  5 ++++-
 2 files changed, 11 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 382dea83e4f..674174365f7 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -60,7 +60,6 @@
 #define GPMC_CHUNK_SHIFT	24		/* 16 MB */
 #define GPMC_SECTION_SHIFT	28		/* 128 MB */
 
-#define PREFETCH_FIFOTHRESHOLD	(0x40 << 8)
 #define CS_NUM_SHIFT		24
 #define ENABLE_PREFETCH		(0x1 << 7)
 #define DMA_MPU_MODE		2
@@ -606,15 +605,19 @@ EXPORT_SYMBOL(gpmc_nand_write);
 /**
  * gpmc_prefetch_enable - configures and starts prefetch transfer
  * @cs: cs (chip select) number
+ * @fifo_th: fifo threshold to be used for read/ write
  * @dma_mode: dma mode enable (1) or disable (0)
  * @u32_count: number of bytes to be transferred
  * @is_write: prefetch read(0) or write post(1) mode
  */
-int gpmc_prefetch_enable(int cs, int dma_mode,
+int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode,
 				unsigned int u32_count, int is_write)
 {
 
-	if (!(gpmc_read_reg(GPMC_PREFETCH_CONTROL))) {
+	if (fifo_th > PREFETCH_FIFOTHRESHOLD_MAX) {
+		pr_err("gpmc: fifo threshold is not supported\n");
+		return -1;
+	} else if (!(gpmc_read_reg(GPMC_PREFETCH_CONTROL))) {
 		/* Set the amount of bytes to be prefetched */
 		gpmc_write_reg(GPMC_PREFETCH_CONFIG2, u32_count);
 
@@ -622,7 +625,7 @@ int gpmc_prefetch_enable(int cs, int dma_mode,
 		 * enable the engine. Set which cs is has requested for.
 		 */
 		gpmc_write_reg(GPMC_PREFETCH_CONFIG1, ((cs << CS_NUM_SHIFT) |
-					PREFETCH_FIFOTHRESHOLD |
+					PREFETCH_FIFOTHRESHOLD(fifo_th) |
 					ENABLE_PREFETCH |
 					(dma_mode << DMA_MPU_MODE) |
 					(0x1 & is_write)));
diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h
index 9c060da0a87..a2434639063 100644
--- a/arch/arm/plat-omap/include/plat/gpmc.h
+++ b/arch/arm/plat-omap/include/plat/gpmc.h
@@ -83,6 +83,9 @@
 #define GPMC_IRQ_FIFOEVENTENABLE	0x01
 #define GPMC_IRQ_COUNT_EVENT		0x02
 
+#define PREFETCH_FIFOTHRESHOLD_MAX	0x40
+#define PREFETCH_FIFOTHRESHOLD(val)	((val) << 8)
+
 /*
  * Note that all values in this struct are in nanoseconds except sync_clk
  * (which is in picoseconds), while the register values are in gpmc_fck cycles.
@@ -134,7 +137,7 @@ extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
 extern void gpmc_cs_free(int cs);
 extern int gpmc_cs_set_reserved(int cs, int reserved);
 extern int gpmc_cs_reserved(int cs);
-extern int gpmc_prefetch_enable(int cs, int dma_mode,
+extern int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode,
 					unsigned int u32_count, int is_write);
 extern int gpmc_prefetch_reset(int cs);
 extern void omap3_gpmc_save_context(void);
-- 
cgit v1.2.3-18-g5258


From f3d73f362d689a1d044e77964864f0a8ea0217f3 Mon Sep 17 00:00:00 2001
From: Sukumar Ghorai <s-ghorai@ti.com>
Date: Fri, 28 Jan 2011 15:42:08 +0530
Subject: omap3: nand: ecc layout select from board file

This patch makes it possible to select sw or hw (different layout options)
ecc scheme supported by omap nand driver.

Signed-off-by: Vimal Singh <vimalsingh@ti.com>
Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-flash.c      | 1 +
 arch/arm/plat-omap/include/plat/gpmc.h | 6 ++++++
 arch/arm/plat-omap/include/plat/nand.h | 2 ++
 3 files changed, 9 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index 19645095d59..a7681981201 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -148,6 +148,7 @@ __init board_nand_init(struct mtd_partition *nand_parts,
 	board_nand_data.nr_parts	= nr_parts;
 	board_nand_data.devsize		= nand_type;
 
+	board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT;
 	board_nand_data.gpmc_irq = OMAP_GPMC_IRQ_BASE + cs;
 	gpmc_nand_init(&board_nand_data);
 }
diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h
index a2434639063..773351bc25a 100644
--- a/arch/arm/plat-omap/include/plat/gpmc.h
+++ b/arch/arm/plat-omap/include/plat/gpmc.h
@@ -86,6 +86,12 @@
 #define PREFETCH_FIFOTHRESHOLD_MAX	0x40
 #define PREFETCH_FIFOTHRESHOLD(val)	((val) << 8)
 
+enum omap_ecc {
+		/* 1-bit ecc: stored at end of spare area */
+	OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */
+	OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */
+};
+
 /*
  * Note that all values in this struct are in nanoseconds except sync_clk
  * (which is in picoseconds), while the register values are in gpmc_fck cycles.
diff --git a/arch/arm/plat-omap/include/plat/nand.h b/arch/arm/plat-omap/include/plat/nand.h
index ae5e0538303..d86d1ecf006 100644
--- a/arch/arm/plat-omap/include/plat/nand.h
+++ b/arch/arm/plat-omap/include/plat/nand.h
@@ -8,6 +8,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <plat/gpmc.h>
 #include <linux/mtd/partitions.h>
 
 enum nand_io {
@@ -31,6 +32,7 @@ struct omap_nand_platform_data {
 	enum nand_io		xfer_type;
 	unsigned long		phys_base;
 	int			devsize;
+	enum omap_ecc           ecc_opt;
 };
 
 /* minimum size for IO mapping */
-- 
cgit v1.2.3-18-g5258


From f040d33253b2daf6f305fc35fca2399047ced028 Mon Sep 17 00:00:00 2001
From: Sukumar Ghorai <s-ghorai@ti.com>
Date: Fri, 28 Jan 2011 15:42:09 +0530
Subject: omap3: nand: making ecc layout as compatible with romcode ecc

This patch overrides nand ecc layout and bad block descriptor (for 8-bit
device) to support hw ecc in romcode layout. So as to have in sync with ecc
layout throughout; i.e. x-loader, u-boot and kernel.

This enables to flash x-loader, u-boot, kernel, FS images from kernel itself
and compatiable with other tools.

This patch does not enables this feature by default and need to pass from
board file to enable for any board.

Signed-off-by: Vimal Singh <vimalsingh@ti.com>
Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/include/plat/gpmc.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h
index 773351bc25a..12b31616503 100644
--- a/arch/arm/plat-omap/include/plat/gpmc.h
+++ b/arch/arm/plat-omap/include/plat/gpmc.h
@@ -90,6 +90,8 @@ enum omap_ecc {
 		/* 1-bit ecc: stored at end of spare area */
 	OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */
 	OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */
+		/* 1-bit ecc: stored at begining of spare area as romcode */
+	OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */
 };
 
 /*
-- 
cgit v1.2.3-18-g5258


From 4b087ff8572c7e7095787ca14aa72e39c80859bd Mon Sep 17 00:00:00 2001
From: Rajendra Nayak <rnayak@ti.com>
Date: Thu, 3 Feb 2011 12:45:21 +0000
Subject: omap3sdp: Fix regulator mapping for ads7846 TS controller

On the OMAP3430SDP board, the ads7846 touchscreen controller
is powered by VAUX3 regulator (supplying 2.8v).
Fix this mapping in the board file, and hence prevent
the ads7846 driver init to fail with the below error..

ads7846 spi1.0: unable to get regulator: -19

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-3430sdp.c | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 31085883199..7f8c7a73c53 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -426,6 +426,11 @@ static struct twl4030_madc_platform_data sdp3430_madc_data = {
 	.irq_line	= 1,
 };
 
+/* ads7846 on SPI */
+static struct regulator_consumer_supply sdp3430_vaux3_supplies[] = {
+	REGULATOR_SUPPLY("vcc", "spi1.0"),
+};
+
 /*
  * Apply all the fixed voltages since most versions of U-Boot
  * don't bother with that initialization.
@@ -468,6 +473,8 @@ static struct regulator_init_data sdp3430_vaux3 = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
+	.num_consumer_supplies		= ARRAY_SIZE(sdp3430_vaux3_supplies),
+	.consumer_supplies		= sdp3430_vaux3_supplies,
 };
 
 /* VAUX4 for OMAP VDD_CSI2 (camera) */
-- 
cgit v1.2.3-18-g5258


From 1435ca0fc1a269f9496343e24223a0fc430aff7a Mon Sep 17 00:00:00 2001
From: Adrian Hunter <adrian.hunter@nokia.com>
Date: Mon, 7 Feb 2011 10:46:58 +0200
Subject: OMAP: OneNAND: fix 104MHz support

104MHz needs a latency of 8 clock cycles and the VHF
flag must be set.  Also t_rdyo is specified as
"not applicable" so pick a lower value, and force at
least 1 clk between AVD High to OE Low.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/gpmc-onenand.c | 23 +++++++++++++++++------
 1 file changed, 17 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index 3a7d25fb00e..3a4307b8f7c 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -94,7 +94,7 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
 }
 
 static void set_onenand_cfg(void __iomem *onenand_base, int latency,
-				int sync_read, int sync_write, int hf)
+				int sync_read, int sync_write, int hf, int vhf)
 {
 	u32 reg;
 
@@ -114,6 +114,10 @@ static void set_onenand_cfg(void __iomem *onenand_base, int latency,
 		reg |= ONENAND_SYS_CFG1_HF;
 	else
 		reg &= ~ONENAND_SYS_CFG1_HF;
+	if (vhf)
+		reg |= ONENAND_SYS_CFG1_VHF;
+	else
+		reg &= ~ONENAND_SYS_CFG1_VHF;
 	writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
 }
 
@@ -130,7 +134,7 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 	const int t_wph  = 30;
 	int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo;
 	int tick_ns, div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency;
-	int first_time = 0, hf = 0, sync_read = 0, sync_write = 0;
+	int first_time = 0, hf = 0, vhf = 0, sync_read = 0, sync_write = 0;
 	int err, ticks_cez;
 	int cs = cfg->cs;
 	u32 reg;
@@ -180,7 +184,7 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 		t_avdh  = 2;
 		t_ach   = 3;
 		t_aavdh = 6;
-		t_rdyo  = 9;
+		t_rdyo  = 6;
 		break;
 	case 83:
 		min_gpmc_clk_period = 12000; /* 83 MHz */
@@ -217,7 +221,11 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 	gpmc_clk_ns = gpmc_ticks_to_ns(div);
 	if (gpmc_clk_ns < 15) /* >66Mhz */
 		hf = 1;
-	if (hf)
+	if (gpmc_clk_ns < 12) /* >83Mhz */
+		vhf = 1;
+	if (vhf)
+		latency = 8;
+	else if (hf)
 		latency = 6;
 	else if (gpmc_clk_ns >= 25) /* 40 MHz*/
 		latency = 3;
@@ -226,7 +234,7 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 
 	if (first_time)
 		set_onenand_cfg(onenand_base, latency,
-					sync_read, sync_write, hf);
+					sync_read, sync_write, hf, vhf);
 
 	if (div == 1) {
 		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2);
@@ -264,6 +272,9 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 	/* Read */
 	t.adv_rd_off = gpmc_ticks_to_ns(fclk_offset + gpmc_ns_to_ticks(t_avdh));
 	t.oe_on = gpmc_ticks_to_ns(fclk_offset + gpmc_ns_to_ticks(t_ach));
+	/* Force at least 1 clk between AVD High to OE Low */
+	if (t.oe_on <= t.adv_rd_off)
+		t.oe_on = t.adv_rd_off + gpmc_round_ns_to_ticks(1);
 	t.access = gpmc_ticks_to_ns(fclk_offset + (latency + 1) * div);
 	t.oe_off = t.access + gpmc_round_ns_to_ticks(1);
 	t.cs_rd_off = t.oe_off;
@@ -317,7 +328,7 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 	if (err)
 		return err;
 
-	set_onenand_cfg(onenand_base, latency, sync_read, sync_write, hf);
+	set_onenand_cfg(onenand_base, latency, sync_read, sync_write, hf, vhf);
 
 	return 0;
 }
-- 
cgit v1.2.3-18-g5258


From 3ad2d861362031dac8b2bba78a8f4c575300948f Mon Sep 17 00:00:00 2001
From: Adrian Hunter <adrian.hunter@nokia.com>
Date: Mon, 7 Feb 2011 10:46:59 +0200
Subject: OMAP: OneNAND: determine frequency in one place

OneNAND frequency is determined when calculating
GPMC timings.  Return that value instead of determining it
again in the OMAP OneNAND driver.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/gpmc-onenand.c        | 10 ++++++----
 arch/arm/plat-omap/include/plat/onenand.h |  2 +-
 2 files changed, 7 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index 3a4307b8f7c..46786a606e9 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -123,7 +123,7 @@ static void set_onenand_cfg(void __iomem *onenand_base, int latency,
 
 static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 					void __iomem *onenand_base,
-					int freq)
+					int *freq_ptr)
 {
 	struct gpmc_timings t;
 	const int t_cer  = 15;
@@ -136,7 +136,7 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 	int tick_ns, div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency;
 	int first_time = 0, hf = 0, vhf = 0, sync_read = 0, sync_write = 0;
 	int err, ticks_cez;
-	int cs = cfg->cs;
+	int cs = cfg->cs, freq = *freq_ptr;
 	u32 reg;
 
 	if (cfg->flags & ONENAND_SYNC_READ) {
@@ -330,16 +330,18 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 
 	set_onenand_cfg(onenand_base, latency, sync_read, sync_write, hf, vhf);
 
+	*freq_ptr = freq;
+
 	return 0;
 }
 
-static int gpmc_onenand_setup(void __iomem *onenand_base, int freq)
+static int gpmc_onenand_setup(void __iomem *onenand_base, int *freq_ptr)
 {
 	struct device *dev = &gpmc_onenand_device.dev;
 
 	/* Set sync timings in GPMC */
 	if (omap2_onenand_set_sync_mode(gpmc_onenand_data, onenand_base,
-			freq) < 0) {
+			freq_ptr) < 0) {
 		dev_err(dev, "Unable to set synchronous mode\n");
 		return -EINVAL;
 	}
diff --git a/arch/arm/plat-omap/include/plat/onenand.h b/arch/arm/plat-omap/include/plat/onenand.h
index affe87e9ece..86118dc3f19 100644
--- a/arch/arm/plat-omap/include/plat/onenand.h
+++ b/arch/arm/plat-omap/include/plat/onenand.h
@@ -20,7 +20,7 @@ struct omap_onenand_platform_data {
 	int			gpio_irq;
 	struct mtd_partition	*parts;
 	int			nr_parts;
-	int                     (*onenand_setup)(void __iomem *, int freq);
+	int			(*onenand_setup)(void __iomem *, int *freq_ptr);
 	int			dma_channel;
 	u8			flags;
 	u8			regulator_can_sleep;
-- 
cgit v1.2.3-18-g5258


From 5714b7ed6b3e3c00c0d4719bb66757e64c30ecf6 Mon Sep 17 00:00:00 2001
From: Adrian Hunter <adrian.hunter@nokia.com>
Date: Mon, 7 Feb 2011 10:47:00 +0200
Subject: OMAP: OneNAND: let boards determine OneNAND frequency

OneNAND version ID may not give the highest frequency
supported and some OneNAND's have setup times that are
clock dependent.  Let the board provide that information.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/gpmc-onenand.c        | 80 +++++++++++++++++++++++--------
 arch/arm/plat-omap/include/plat/onenand.h |  8 ++++
 2 files changed, 67 insertions(+), 21 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index 46786a606e9..d776ded9830 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -121,6 +121,47 @@ static void set_onenand_cfg(void __iomem *onenand_base, int latency,
 	writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
 }
 
+static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg,
+				  void __iomem *onenand_base, bool *clk_dep)
+{
+	u16 ver = readw(onenand_base + ONENAND_REG_VERSION_ID);
+	int freq = 0;
+
+	if (cfg->get_freq) {
+		struct onenand_freq_info fi;
+
+		fi.maf_id = readw(onenand_base + ONENAND_REG_MANUFACTURER_ID);
+		fi.dev_id = readw(onenand_base + ONENAND_REG_DEVICE_ID);
+		fi.ver_id = ver;
+		freq = cfg->get_freq(&fi, clk_dep);
+		if (freq)
+			return freq;
+	}
+
+	switch ((ver >> 4) & 0xf) {
+	case 0:
+		freq = 40;
+		break;
+	case 1:
+		freq = 54;
+		break;
+	case 2:
+		freq = 66;
+		break;
+	case 3:
+		freq = 83;
+		break;
+	case 4:
+		freq = 104;
+		break;
+	default:
+		freq = 54;
+		break;
+	}
+
+	return freq;
+}
+
 static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 					void __iomem *onenand_base,
 					int *freq_ptr)
@@ -138,6 +179,7 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 	int err, ticks_cez;
 	int cs = cfg->cs, freq = *freq_ptr;
 	u32 reg;
+	bool clk_dep = false;
 
 	if (cfg->flags & ONENAND_SYNC_READ) {
 		sync_read = 1;
@@ -152,27 +194,7 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 		err = omap2_onenand_set_async_mode(cs, onenand_base);
 		if (err)
 			return err;
-		reg = readw(onenand_base + ONENAND_REG_VERSION_ID);
-		switch ((reg >> 4) & 0xf) {
-		case 0:
-			freq = 40;
-			break;
-		case 1:
-			freq = 54;
-			break;
-		case 2:
-			freq = 66;
-			break;
-		case 3:
-			freq = 83;
-			break;
-		case 4:
-			freq = 104;
-			break;
-		default:
-			freq = 54;
-			break;
-		}
+		freq = omap2_onenand_get_freq(cfg, onenand_base, &clk_dep);
 		first_time = 1;
 	}
 
@@ -232,6 +254,22 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 	else
 		latency = 4;
 
+	if (clk_dep) {
+		if (gpmc_clk_ns < 12) { /* >83Mhz */
+			t_ces   = 3;
+			t_avds  = 4;
+		} else if (gpmc_clk_ns < 15) { /* >66Mhz */
+			t_ces   = 5;
+			t_avds  = 4;
+		} else if (gpmc_clk_ns < 25) { /* >40Mhz */
+			t_ces   = 6;
+			t_avds  = 5;
+		} else {
+			t_ces   = 7;
+			t_avds  = 7;
+		}
+	}
+
 	if (first_time)
 		set_onenand_cfg(onenand_base, latency,
 					sync_read, sync_write, hf, vhf);
diff --git a/arch/arm/plat-omap/include/plat/onenand.h b/arch/arm/plat-omap/include/plat/onenand.h
index 86118dc3f19..cbe897ca7f9 100644
--- a/arch/arm/plat-omap/include/plat/onenand.h
+++ b/arch/arm/plat-omap/include/plat/onenand.h
@@ -15,12 +15,20 @@
 #define ONENAND_SYNC_READ	(1 << 0)
 #define ONENAND_SYNC_READWRITE	(1 << 1)
 
+struct onenand_freq_info {
+	u16			maf_id;
+	u16			dev_id;
+	u16			ver_id;
+};
+
 struct omap_onenand_platform_data {
 	int			cs;
 	int			gpio_irq;
 	struct mtd_partition	*parts;
 	int			nr_parts;
 	int			(*onenand_setup)(void __iomem *, int *freq_ptr);
+	int		(*get_freq)(const struct onenand_freq_info *freq_info,
+				    bool *clk_dep);
 	int			dma_channel;
 	u8			flags;
 	u8			regulator_can_sleep;
-- 
cgit v1.2.3-18-g5258


From 4f85f99b1e9ae9d62e3ea9f0cd3827020e0d9ba2 Mon Sep 17 00:00:00 2001
From: David Cohen <dacohen@gmail.com>
Date: Tue, 15 Feb 2011 11:31:13 +0000
Subject: omap: IOMMU: add missing function declaration

Declaration of exported function 'iopgtable_lookup_entry' is missing from
header file. Currently we have a sparse warning as it's not being used
externally. Adding its declaration to avoid such warning and allow its usage
in future.

Signed-off-by: David Cohen <dacohen@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/include/plat/iommu.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/include/plat/iommu.h b/arch/arm/plat-omap/include/plat/iommu.h
index 69230d68553..19cbb5e9ece 100644
--- a/arch/arm/plat-omap/include/plat/iommu.h
+++ b/arch/arm/plat-omap/include/plat/iommu.h
@@ -154,6 +154,8 @@ extern void flush_iotlb_range(struct iommu *obj, u32 start, u32 end);
 extern void flush_iotlb_all(struct iommu *obj);
 
 extern int iopgtable_store_entry(struct iommu *obj, struct iotlb_entry *e);
+extern void iopgtable_lookup_entry(struct iommu *obj, u32 da, u32 **ppgd,
+				   u32 **ppte);
 extern size_t iopgtable_clear_entry(struct iommu *obj, u32 iova);
 
 extern int iommu_set_da_range(struct iommu *obj, u32 start, u32 end);
-- 
cgit v1.2.3-18-g5258


From f69eefd18d5201cd512c862a4bd27b8e8febd20b Mon Sep 17 00:00:00 2001
From: Sanjeev Premi <premi@ti.com>
Date: Tue, 15 Feb 2011 10:57:31 +0000
Subject: omap3: fix minor typos

This patch fixes typos that were remaining after
the file and functions were renamed.

Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-flash.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index fd38c05bb47..ce61200ae68 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -1,5 +1,5 @@
 /*
- * board-sdp-flash.c
+ * board-flash.c
  * Modified from mach-omap2/board-3430sdp-flash.c
  *
  * Copyright (C) 2009 Nokia Corporation
@@ -189,7 +189,7 @@ unmap:
 }
 
 /**
- * sdp3430_flash_init - Identify devices connected to GPMC and register.
+ * board_flash_init - Identify devices connected to GPMC and register.
  *
  * @return - void.
  */
-- 
cgit v1.2.3-18-g5258


From adc5430b473db2842a96fcce1ffbd43049757d3b Mon Sep 17 00:00:00 2001
From: Sanjeev Premi <premi@ti.com>
Date: Tue, 15 Feb 2011 10:57:32 +0000
Subject: omap3: flash: use pr_err instead of printk

Change all occurences of printf() to pr_err().
Includes minor formatting changes as result of
this change.

Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-flash.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index ce61200ae68..86d1020da15 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -73,11 +73,11 @@ __init board_nor_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 c