From 4b239f458c229de044d6905c2b0f9fe16ed9e01e Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 17 Dec 2010 16:58:28 -0800 Subject: x86-64, mm: Put early page table high While dubug kdump, found current kernel will have problem with crashkernel=512M. It turns out that initial mapping is to 512M, and later initial mapping to 4G (acutally is 2040M in my platform), will put page table near 512M. then initial mapping to 128g will be near 2g. before this patch: [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: [0x00000000000000-0x0000007f74ffff] [ 0.000000] 0000000000 - 007f600000 page 2M [ 0.000000] 007f600000 - 007f750000 page 4k [ 0.000000] kernel direct mapping tables up to 7f750000 @ [0x1fffc000-0x1fffffff] [ 0.000000] memblock_x86_reserve_range: [0x1fffc000-0x1fffdfff] PGTABLE [ 0.000000] init_memory_mapping: [0x00000100000000-0x0000207fffffff] [ 0.000000] 0100000000 - 2080000000 page 2M [ 0.000000] kernel direct mapping tables up to 2080000000 @ [0x7bc01000-0x7bc83fff] [ 0.000000] memblock_x86_reserve_range: [0x7bc01000-0x7bc7efff] PGTABLE [ 0.000000] RAMDISK: 7bc84000 - 7f745000 [ 0.000000] crashkernel reservation failed - No suitable area found. after patch: [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: [0x00000000000000-0x0000007f74ffff] [ 0.000000] 0000000000 - 007f600000 page 2M [ 0.000000] 007f600000 - 007f750000 page 4k [ 0.000000] kernel direct mapping tables up to 7f750000 @ [0x7f74c000-0x7f74ffff] [ 0.000000] memblock_x86_reserve_range: [0x7f74c000-0x7f74dfff] PGTABLE [ 0.000000] init_memory_mapping: [0x00000100000000-0x0000207fffffff] [ 0.000000] 0100000000 - 2080000000 page 2M [ 0.000000] kernel direct mapping tables up to 2080000000 @ [0x207ff7d000-0x207fffffff] [ 0.000000] memblock_x86_reserve_range: [0x207ff7d000-0x207fffafff] PGTABLE [ 0.000000] RAMDISK: 7bc84000 - 7f745000 [ 0.000000] memblock_x86_reserve_range: [0x17000000-0x36ffffff] CRASH KERNEL [ 0.000000] Reserving 512MB of memory at 368MB for crashkernel (System RAM: 133120MB) It means with the patch, page table for [0, 2g) will need 2g, instead of under 512M, page table for [4g, 128g) will be near 128g, instead of under 2g. That would good, if we have lots of memory above 4g, like 1024g, or 2048g or 16T, will not put related page table under 2g. that would be have chance to fill the under 2g if 1G or 2M page is not used. the code change will use add map_low_page() and update unmap_low_page() for 64bit, and use them to get access the corresponding high memory for page table setting. Signed-off-by: Yinghai Lu LKML-Reference: <4D0C0734.7060900@kernel.org> Signed-off-by: H. Peter Anvin --- arch/x86/mm/init.c | 9 +++----- arch/x86/mm/init_64.c | 63 ++++++++++++++++++++++----------------------------- 2 files changed, 30 insertions(+), 42 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index c0e28a13de7..5863950ebe0 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -33,7 +33,7 @@ int direct_gbpages static void __init find_early_table_space(unsigned long end, int use_pse, int use_gbpages) { - unsigned long puds, pmds, ptes, tables, start; + unsigned long puds, pmds, ptes, tables, start = 0, good_end = end; phys_addr_t base; puds = (end + PUD_SIZE - 1) >> PUD_SHIFT; @@ -73,12 +73,9 @@ static void __init find_early_table_space(unsigned long end, int use_pse, * need roughly 0.5KB per GB. */ #ifdef CONFIG_X86_32 - start = 0x7000; -#else - start = 0x8000; + good_end = max_pfn_mapped << PAGE_SHIFT; #endif - base = memblock_find_in_range(start, max_pfn_mapped< Date: Fri, 17 Dec 2010 16:58:40 -0800 Subject: x86-64, gart: Fix allocation with memblock When trying to change alloc_bootmem with memblock to go with real top-down Found one old system: [ 0.000000] Node 0: aperture @ ac000000 size 64 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] memblock_x86_reserve_range: [0x2020000000-0x2023ffffff] aperture64 [ 0.000000] Cannot allocate aperture memory hole (ffff882020000000,65536K) [ 0.000000] memblock_x86_free_range: [0x2020000000-0x2023ffffff] [ 0.000000] Kernel panic - not syncing: Not enough memory for aperture [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.37-rc5-tip-yh-06229-gb792dc2-dirty #331 [ 0.000000] Call Trace: [ 0.000000] [] ? panic+0x91/0x1a3 [ 0.000000] [] ? gart_iommu_hole_init+0x3d7/0x4a3 [ 0.000000] [] ? _etext+0x0/0x3 [ 0.000000] [] ? pci_iommu_alloc+0x47/0x71 [ 0.000000] [] ? mem_init+0x19/0xec [ 0.000000] [] ? start_kernel+0x20a/0x3e8 [ 0.000000] [] ? x86_64_start_reservations+0x9c/0xa0 [ 0.000000] [] ? x86_64_start_kernel+0x114/0x11b it means __alloc_bootmem_nopanic() get too high for that aperture. Use memblock_find_in_range() with limit directly. Signed-off-by: Yinghai Lu LKML-Reference: <4D0C0740.90104@kernel.org> Signed-off-by: H. Peter Anvin --- arch/x86/kernel/aperture_64.c | 33 ++++++++++++++++----------------- 1 file changed, 16 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index dcd7c83e165..85f66b4f4fe 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include #include #include #include @@ -69,7 +69,7 @@ static void __init insert_aperture_resource(u32 aper_base, u32 aper_size) static u32 __init allocate_aperture(void) { u32 aper_size; - void *p; + unsigned long addr; /* aper_size should <= 1G */ if (fallback_aper_order > 5) @@ -95,27 +95,26 @@ static u32 __init allocate_aperture(void) * so don't use 512M below as gart iommu, leave the space for kernel * code for safe */ - p = __alloc_bootmem_nopanic(aper_size, aper_size, 512ULL<<20); + addr = memblock_find_in_range(0, 1ULL<<32, aper_size, 512ULL<<20); + if (addr == MEMBLOCK_ERROR || addr + aper_size > 0xffffffff) { + printk(KERN_ERR + "Cannot allocate aperture memory hole (%lx,%uK)\n", + addr, aper_size>>10); + return 0; + } + memblock_x86_reserve_range(addr, addr + aper_size, "aperture64"); /* * Kmemleak should not scan this block as it may not be mapped via the * kernel direct mapping. */ - kmemleak_ignore(p); - if (!p || __pa(p)+aper_size > 0xffffffff) { - printk(KERN_ERR - "Cannot allocate aperture memory hole (%p,%uK)\n", - p, aper_size>>10); - if (p) - free_bootmem(__pa(p), aper_size); - return 0; - } + kmemleak_ignore(phys_to_virt(addr)); printk(KERN_INFO "Mapping aperture over %d KB of RAM @ %lx\n", - aper_size >> 10, __pa(p)); - insert_aperture_resource((u32)__pa(p), aper_size); - register_nosave_region((u32)__pa(p) >> PAGE_SHIFT, - (u32)__pa(p+aper_size) >> PAGE_SHIFT); + aper_size >> 10, addr); + insert_aperture_resource((u32)addr, aper_size); + register_nosave_region(addr >> PAGE_SHIFT, + (addr+aper_size) >> PAGE_SHIFT); - return (u32)__pa(p); + return (u32)addr; } -- cgit v1.2.3-18-g5258 From 45635ab5e41bcde94a82f9a05d660ef77fe38c1b Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 27 Dec 2010 16:47:54 -0800 Subject: x86: Change get_max_mapped() to inline Move it into head file. to prepare use it in other files. [ hpa: added missing and changed type to phys_addr_t. ] Signed-off-by: Yinghai Lu LKML-Reference: <4D1933BA.8000508@kernel.org> Signed-off-by: H. Peter Anvin --- arch/x86/include/asm/page_types.h | 6 ++++++ arch/x86/kernel/setup.c | 9 --------- 2 files changed, 6 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/page_types.h b/arch/x86/include/asm/page_types.h index 1df66211fd1..93626e69967 100644 --- a/arch/x86/include/asm/page_types.h +++ b/arch/x86/include/asm/page_types.h @@ -2,6 +2,7 @@ #define _ASM_X86_PAGE_DEFS_H #include +#include /* PAGE_SHIFT determines the page size */ #define PAGE_SHIFT 12 @@ -45,6 +46,11 @@ extern int devmem_is_allowed(unsigned long pagenr); extern unsigned long max_low_pfn_mapped; extern unsigned long max_pfn_mapped; +static inline phys_addr_t get_max_mapped(void) +{ + return (phys_addr_t)max_pfn_mapped << PAGE_SHIFT; +} + extern unsigned long init_memory_mapping(unsigned long start, unsigned long end); diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index df172c1e823..3def8c9a5dc 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -669,15 +669,6 @@ static int __init parse_reservelow(char *p) early_param("reservelow", parse_reservelow); -static u64 __init get_max_mapped(void) -{ - u64 end = max_pfn_mapped; - - end <<= PAGE_SHIFT; - - return end; -} - /* * Determine if we were loaded by an EFI loader. If so, then we have also been * passed the efi memmap, systab, etc., so we should use these data structures -- cgit v1.2.3-18-g5258 From dbef7b56d2fc5115f26f72a0b080283bbf972cab Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 27 Dec 2010 16:48:08 -0800 Subject: x86-64, numa: Allocate memnodemap under max_pfn_mapped We need to access it right way, so make sure that it is mapped already. Prepare to put page table on local node, and nodemap is used before that. Signed-off-by: Yinghai Lu LKML-Reference: <4D1933C8.7060105@kernel.org> Signed-off-by: H. Peter Anvin --- arch/x86/mm/numa_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index 7762a517d69..02d36ff85eb 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -87,7 +87,7 @@ static int __init allocate_cachealigned_memnodemap(void) addr = 0x8000; nodemap_size = roundup(sizeof(s16) * memnodemapsize, L1_CACHE_BYTES); - nodemap_addr = memblock_find_in_range(addr, max_pfn< Date: Mon, 27 Dec 2010 16:48:17 -0800 Subject: x86-64, numa: Put pgtable to local node memory Introduce init_memory_mapping_high(), and use it with 64bit. It will go with every memory segment above 4g to create page table to the memory range itself. before this patch all page tables was on one node. with this patch, one RED-PEN is killed debug out for 8 sockets system after patch [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: [0x00000000000000-0x0000007f74ffff] [ 0.000000] 0000000000 - 007f600000 page 2M [ 0.000000] 007f600000 - 007f750000 page 4k [ 0.000000] kernel direct mapping tables up to 7f750000 @ [0x7f74c000-0x7f74ffff] [ 0.000000] RAMDISK: 7bc84000 - 7f745000 .... [ 0.000000] Adding active range (0, 0x10, 0x95) 0 entries of 3200 used [ 0.000000] Adding active range (0, 0x100, 0x7f750) 1 entries of 3200 used [ 0.000000] Adding active range (0, 0x100000, 0x1080000) 2 entries of 3200 used [ 0.000000] Adding active range (1, 0x1080000, 0x2080000) 3 entries of 3200 used [ 0.000000] Adding active range (2, 0x2080000, 0x3080000) 4 entries of 3200 used [ 0.000000] Adding active range (3, 0x3080000, 0x4080000) 5 entries of 3200 used [ 0.000000] Adding active range (4, 0x4080000, 0x5080000) 6 entries of 3200 used [ 0.000000] Adding active range (5, 0x5080000, 0x6080000) 7 entries of 3200 used [ 0.000000] Adding active range (6, 0x6080000, 0x7080000) 8 entries of 3200 used [ 0.000000] Adding active range (7, 0x7080000, 0x8080000) 9 entries of 3200 used [ 0.000000] init_memory_mapping: [0x00000100000000-0x0000107fffffff] [ 0.000000] 0100000000 - 1080000000 page 2M [ 0.000000] kernel direct mapping tables up to 1080000000 @ [0x107ffbd000-0x107fffffff] [ 0.000000] memblock_x86_reserve_range: [0x107ffc2000-0x107fffffff] PGTABLE [ 0.000000] init_memory_mapping: [0x00001080000000-0x0000207fffffff] [ 0.000000] 1080000000 - 2080000000 page 2M [ 0.000000] kernel direct mapping tables up to 2080000000 @ [0x207ff7d000-0x207fffffff] [ 0.000000] memblock_x86_reserve_range: [0x207ffc0000-0x207fffffff] PGTABLE [ 0.000000] init_memory_mapping: [0x00002080000000-0x0000307fffffff] [ 0.000000] 2080000000 - 3080000000 page 2M [ 0.000000] kernel direct mapping tables up to 3080000000 @ [0x307ff3d000-0x307fffffff] [ 0.000000] memblock_x86_reserve_range: [0x307ffc0000-0x307fffffff] PGTABLE [ 0.000000] init_memory_mapping: [0x00003080000000-0x0000407fffffff] [ 0.000000] 3080000000 - 4080000000 page 2M [ 0.000000] kernel direct mapping tables up to 4080000000 @ [0x407fefd000-0x407fffffff] [ 0.000000] memblock_x86_reserve_range: [0x407ffc0000-0x407fffffff] PGTABLE [ 0.000000] init_memory_mapping: [0x00004080000000-0x0000507fffffff] [ 0.000000] 4080000000 - 5080000000 page 2M [ 0.000000] kernel direct mapping tables up to 5080000000 @ [0x507febd000-0x507fffffff] [ 0.000000] memblock_x86_reserve_range: [0x507ffc0000-0x507fffffff] PGTABLE [ 0.000000] init_memory_mapping: [0x00005080000000-0x0000607fffffff] [ 0.000000] 5080000000 - 6080000000 page 2M [ 0.000000] kernel direct mapping tables up to 6080000000 @ [0x607fe7d000-0x607fffffff] [ 0.000000] memblock_x86_reserve_range: [0x607ffc0000-0x607fffffff] PGTABLE [ 0.000000] init_memory_mapping: [0x00006080000000-0x0000707fffffff] [ 0.000000] 6080000000 - 7080000000 page 2M [ 0.000000] kernel direct mapping tables up to 7080000000 @ [0x707fe3d000-0x707fffffff] [ 0.000000] memblock_x86_reserve_range: [0x707ffc0000-0x707fffffff] PGTABLE [ 0.000000] init_memory_mapping: [0x00007080000000-0x0000807fffffff] [ 0.000000] 7080000000 - 8080000000 page 2M [ 0.000000] kernel direct mapping tables up to 8080000000 @ [0x807fdfc000-0x807fffffff] [ 0.000000] memblock_x86_reserve_range: [0x807ffbf000-0x807fffffff] PGTABLE [ 0.000000] Initmem setup node 0 [0000000000000000-000000107fffffff] [ 0.000000] NODE_DATA [0x0000107ffbd000-0x0000107ffc1fff] [ 0.000000] Initmem setup node 1 [0000001080000000-000000207fffffff] [ 0.000000] NODE_DATA [0x0000207ffbb000-0x0000207ffbffff] [ 0.000000] Initmem setup node 2 [0000002080000000-000000307fffffff] [ 0.000000] NODE_DATA [0x0000307ffbb000-0x0000307ffbffff] [ 0.000000] Initmem setup node 3 [0000003080000000-000000407fffffff] [ 0.000000] NODE_DATA [0x0000407ffbb000-0x0000407ffbffff] [ 0.000000] Initmem setup node 4 [0000004080000000-000000507fffffff] [ 0.000000] NODE_DATA [0x0000507ffbb000-0x0000507ffbffff] [ 0.000000] Initmem setup node 5 [0000005080000000-000000607fffffff] [ 0.000000] NODE_DATA [0x0000607ffbb000-0x0000607ffbffff] [ 0.000000] Initmem setup node 6 [0000006080000000-000000707fffffff] [ 0.000000] NODE_DATA [0x0000707ffbb000-0x0000707ffbffff] [ 0.000000] Initmem setup node 7 [0000007080000000-000000807fffffff] [ 0.000000] NODE_DATA [0x0000807ffba000-0x0000807ffbefff] Signed-off-by: Yinghai Lu LKML-Reference: <4D1933D1.9020609@kernel.org> Signed-off-by: H. Peter Anvin --- arch/x86/include/asm/page_types.h | 2 ++ arch/x86/kernel/setup.c | 8 ------ arch/x86/mm/amdtopology_64.c | 8 +++--- arch/x86/mm/init.c | 8 +----- arch/x86/mm/init_64.c | 54 +++++++++++++++++++++++++++++++++++++++ arch/x86/mm/numa_64.c | 6 +++-- arch/x86/mm/srat_64.c | 2 ++ 7 files changed, 68 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/page_types.h b/arch/x86/include/asm/page_types.h index 93626e69967..731d211a1b2 100644 --- a/arch/x86/include/asm/page_types.h +++ b/arch/x86/include/asm/page_types.h @@ -54,6 +54,8 @@ static inline phys_addr_t get_max_mapped(void) extern unsigned long init_memory_mapping(unsigned long start, unsigned long end); +void init_memory_mapping_high(void); + extern void initmem_init(unsigned long start_pfn, unsigned long end_pfn, int acpi, int k8); extern void free_initmem(void); diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 3def8c9a5dc..fc0fe743f3a 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -931,14 +931,6 @@ void __init setup_arch(char **cmdline_p) max_low_pfn_mapped = init_memory_mapping(0, max_low_pfn< max_low_pfn) { - max_pfn_mapped = init_memory_mapping(1UL<<32, - max_pfn<> PAGE_SHIFT, nodes[i].end >> PAGE_SHIFT); + init_memory_mapping_high(); + for_each_node_mask(i, node_possible_map) { + int j; + for (j = apicid_base; j < cores + apicid_base; j++) apicid_to_node[(i << bits) + j] = i; setup_node_bootmem(i, nodes[i].start, nodes[i].end); diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index 5863950ebe0..fa6fe756d91 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -65,16 +65,10 @@ static void __init find_early_table_space(unsigned long end, int use_pse, #ifdef CONFIG_X86_32 /* for fixmap */ tables += roundup(__end_of_fixed_addresses * sizeof(pte_t), PAGE_SIZE); -#endif - /* - * RED-PEN putting page tables only on node 0 could - * cause a hotspot and fill up ZONE_DMA. The page tables - * need roughly 0.5KB per GB. - */ -#ifdef CONFIG_X86_32 good_end = max_pfn_mapped << PAGE_SHIFT; #endif + base = memblock_find_in_range(start, good_end, tables, PAGE_SIZE); if (base == MEMBLOCK_ERROR) panic("Cannot find space for the kernel page tables"); diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 024847dc81a..194f2732ab7 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -607,9 +607,63 @@ void __init initmem_init(unsigned long start_pfn, unsigned long end_pfn, int acpi, int k8) { memblock_x86_register_active_regions(0, start_pfn, end_pfn); + init_memory_mapping_high(); } #endif +struct mapping_work_data { + unsigned long start; + unsigned long end; + unsigned long pfn_mapped; +}; + +static int __init_refok +mapping_work_fn(unsigned long start_pfn, unsigned long end_pfn, void *datax) +{ + struct mapping_work_data *data = datax; + unsigned long pfn_mapped; + unsigned long final_start, final_end; + + final_start = max_t(unsigned long, start_pfn<start); + final_end = min_t(unsigned long, end_pfn<end); + + if (final_end <= final_start) + return 0; + + pfn_mapped = init_memory_mapping(final_start, final_end); + + if (pfn_mapped > data->pfn_mapped) + data->pfn_mapped = pfn_mapped; + + return 0; +} + +static unsigned long __init_refok +init_memory_mapping_active_regions(unsigned long start, unsigned long end) +{ + struct mapping_work_data data; + + data.start = start; + data.end = end; + data.pfn_mapped = 0; + + work_with_active_regions(MAX_NUMNODES, mapping_work_fn, &data); + + return data.pfn_mapped; +} + +void __init_refok init_memory_mapping_high(void) +{ + if (max_pfn > max_low_pfn) { + max_pfn_mapped = init_memory_mapping_active_regions(1UL<<32, + max_pfn<> PAGE_SHIFT, nodes[i].end >> PAGE_SHIFT); + init_memory_mapping_high(); + for_each_node_mask(i, node_possible_map) setup_node_bootmem(i, nodes[i].start, nodes[i].end); - } acpi_fake_nodes(nodes, num_nodes); numa_init_array(); return 0; @@ -645,6 +646,7 @@ void __init initmem_init(unsigned long start_pfn, unsigned long last_pfn, for (i = 0; i < nr_cpu_ids; i++) numa_set_node(i, 0); memblock_x86_register_active_regions(0, start_pfn, last_pfn); + init_memory_mapping_high(); setup_node_bootmem(0, start_pfn << PAGE_SHIFT, last_pfn << PAGE_SHIFT); } diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index a35cb9d8b06..0b961c8bffb 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -433,6 +433,8 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end) return -1; } + init_memory_mapping_high(); + /* Account for nodes with cpus and no memory */ nodes_or(node_possible_map, nodes_parsed, cpu_nodes_parsed); -- cgit v1.2.3-18-g5258 From f005fe12b90c5b9fe180a09209a893e09affa8aa Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 27 Dec 2010 16:48:32 -0800 Subject: x86-64: Move out cleanup higmap [_brk_end, _end) out of init_memory_mapping() It is not related to init_memory_mapping(), and init_memory_mapping() is getting more bigger. So make it as seperated function and call it from reserve_brk() and that is point when _brk_end is concluded. Signed-off-by: Yinghai Lu LKML-Reference: <4D1933E0.7090305@kernel.org> Signed-off-by: H. Peter Anvin --- arch/x86/kernel/setup.c | 24 ++++++++++++++++++++++++ arch/x86/mm/init.c | 19 ------------------- 2 files changed, 24 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index fc0fe743f3a..635185ba443 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -293,10 +293,32 @@ static void __init init_gbpages(void) else direct_gbpages = 0; } + +static void __init cleanup_highmap_brk_end(void) +{ + pud_t *pud; + pmd_t *pmd; + + mmu_cr4_features = read_cr4(); + + /* + * _brk_end cannot change anymore, but it and _end may be + * located on different 2M pages. cleanup_highmap(), however, + * can only consider _end when it runs, so destroy any + * mappings beyond _brk_end here. + */ + pud = pud_offset(pgd_offset_k(_brk_end), _brk_end); + pmd = pmd_offset(pud, _brk_end - 1); + while (++pmd <= pmd_offset(pud, (unsigned long)_end - 1)) + pmd_clear(pmd); +} #else static inline void init_gbpages(void) { } +static inline void cleanup_highmap_brk_end(void) +{ +} #endif static void __init reserve_brk(void) @@ -307,6 +329,8 @@ static void __init reserve_brk(void) /* Mark brk area as locked down and no longer taking any new allocations */ _brk_start = 0; + + cleanup_highmap_brk_end(); } #ifdef CONFIG_BLK_DEV_INITRD diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index fa6fe756d91..35ee75d9061 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -270,25 +270,6 @@ unsigned long __init_refok init_memory_mapping(unsigned long start, load_cr3(swapper_pg_dir); #endif -#ifdef CONFIG_X86_64 - if (!after_bootmem && !start) { - pud_t *pud; - pmd_t *pmd; - - mmu_cr4_features = read_cr4(); - - /* - * _brk_end cannot change anymore, but it and _end may be - * located on different 2M pages. cleanup_highmap(), however, - * can only consider _end when it runs, so destroy any - * mappings beyond _brk_end here. - */ - pud = pud_offset(pgd_offset_k(_brk_end), _brk_end); - pmd = pmd_offset(pud, _brk_end - 1); - while (++pmd <= pmd_offset(pud, (unsigned long)_end - 1)) - pmd_clear(pmd); - } -#endif __flush_tlb_all(); if (!after_bootmem && e820_table_end > e820_table_start) -- cgit v1.2.3-18-g5258 From 9f975356f7b17f2923a66b2f8bd505287ab4359c Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Mon, 6 Dec 2010 18:24:32 -0500 Subject: [IA64] Add DMA_ERROR_CODE define. This piggybacks on git commit 8fd524b355daef0945692227e726fb444cebcd4f ("x86: Kill bad_dma_address variable") wherein we use now the dma_map_ops->mapping_error to check for errors and the standard check is against DMA_ERROR_CODE. Introduce it to the IA64 world. CC: FUJITA Tomonori CC: Jesse Barnes Signed-off-by: Konrad Rzeszutek Wilk Signed-off-by: Tony Luck --- arch/ia64/include/asm/dma-mapping.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/ia64/include/asm/dma-mapping.h b/arch/ia64/include/asm/dma-mapping.h index a2e7368a015..4336d080b24 100644 --- a/arch/ia64/include/asm/dma-mapping.h +++ b/arch/ia64/include/asm/dma-mapping.h @@ -12,6 +12,8 @@ #define ARCH_HAS_DMA_GET_REQUIRED_MASK +#define DMA_ERROR_CODE 0 + extern struct dma_map_ops *dma_ops; extern struct ia64_machine_vector ia64_mv; extern void set_iommu_machvec(void); -- cgit v1.2.3-18-g5258 From f311847c2fcebd81912e2f0caf8a461dec28db41 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Wed, 22 Dec 2010 10:22:11 -0600 Subject: parisc: flush pages through tmpalias space The kernel has an 8M tmpailas space (originally designed for copying and clearing pages but now only used for clearing). The idea is to place zeros into the cache above a physical page rather than into the physical page and flush the cache, because often the zeros end up being replaced quickly anyway. We can also use the tmpalias space for flushing a page. The difference here is that we have to do tmpalias processing in the non access data and instruction traps. The principle is the same: as long as we know the physical address and have a virtual address congruent to the real one, the flush will be effective. In order to use the tmpalias space, the icache miss path has to be enhanced to check for the alias region to make the fic instruction effective. Signed-off-by: James Bottomley --- arch/parisc/include/asm/cacheflush.h | 7 +- arch/parisc/kernel/cache.c | 109 +++------------- arch/parisc/kernel/entry.S | 194 +++++++++++++++++++-------- arch/parisc/kernel/pacache.S | 245 ++++++++++++++++------------------- 4 files changed, 272 insertions(+), 283 deletions(-) (limited to 'arch') diff --git a/arch/parisc/include/asm/cacheflush.h b/arch/parisc/include/asm/cacheflush.h index f388a85bba1..dc9286a4dcc 100644 --- a/arch/parisc/include/asm/cacheflush.h +++ b/arch/parisc/include/asm/cacheflush.h @@ -26,8 +26,6 @@ void flush_user_dcache_range_asm(unsigned long, unsigned long); void flush_kernel_dcache_range_asm(unsigned long, unsigned long); void flush_kernel_dcache_page_asm(void *); void flush_kernel_icache_page(void *); -void flush_user_dcache_page(unsigned long); -void flush_user_icache_page(unsigned long); void flush_user_dcache_range(unsigned long, unsigned long); void flush_user_icache_range(unsigned long, unsigned long); @@ -90,12 +88,15 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr, unsigned void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end); +/* defined in pacache.S exported in cache.c used by flush_anon_page */ +void flush_dcache_page_asm(unsigned long phys_addr, unsigned long vaddr); + #define ARCH_HAS_FLUSH_ANON_PAGE static inline void flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned long vmaddr) { if (PageAnon(page)) - flush_user_dcache_page(vmaddr); + flush_dcache_page_asm(page_to_phys(page), vmaddr); } #define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c index d054f3da3ff..3f11331c277 100644 --- a/arch/parisc/kernel/cache.c +++ b/arch/parisc/kernel/cache.c @@ -27,12 +27,17 @@ #include #include #include +#include int split_tlb __read_mostly; int dcache_stride __read_mostly; int icache_stride __read_mostly; EXPORT_SYMBOL(dcache_stride); +void flush_dcache_page_asm(unsigned long phys_addr, unsigned long vaddr); +EXPORT_SYMBOL(flush_dcache_page_asm); +void flush_icache_page_asm(unsigned long phys_addr, unsigned long vaddr); + /* On some machines (e.g. ones with the Merced bus), there can be * only a single PxTLB broadcast at a time; this must be guaranteed @@ -259,81 +264,13 @@ void disable_sr_hashing(void) panic("SpaceID hashing is still on!\n"); } -/* Simple function to work out if we have an existing address translation - * for a user space vma. */ -static inline int translation_exists(struct vm_area_struct *vma, - unsigned long addr, unsigned long pfn) -{ - pgd_t *pgd = pgd_offset(vma->vm_mm, addr); - pmd_t *pmd; - pte_t pte; - - if(pgd_none(*pgd)) - return 0; - - pmd = pmd_offset(pgd, addr); - if(pmd_none(*pmd) || pmd_bad(*pmd)) - return 0; - - /* We cannot take the pte lock here: flush_cache_page is usually - * called with pte lock already held. Whereas flush_dcache_page - * takes flush_dcache_mmap_lock, which is lower in the hierarchy: - * the vma itself is secure, but the pte might come or go racily. - */ - pte = *pte_offset_map(pmd, addr); - /* But pte_unmap() does nothing on this architecture */ - - /* Filter out coincidental file entries and swap entries */ - if (!(pte_val(pte) & (_PAGE_FLUSH|_PAGE_PRESENT))) - return 0; - - return pte_pfn(pte) == pfn; -} - -/* Private function to flush a page from the cache of a non-current - * process. cr25 contains the Page Directory of the current user - * process; we're going to hijack both it and the user space %sr3 to - * temporarily make the non-current process current. We have to do - * this because cache flushing may cause a non-access tlb miss which - * the handlers have to fill in from the pgd of the non-current - * process. */ static inline void -flush_user_cache_page_non_current(struct vm_area_struct *vma, - unsigned long vmaddr) +__flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr, + unsigned long physaddr) { - /* save the current process space and pgd */ - unsigned long space = mfsp(3), pgd = mfctl(25); - - /* we don't mind taking interrupts since they may not - * do anything with user space, but we can't - * be preempted here */ - preempt_disable(); - - /* make us current */ - mtctl(__pa(vma->vm_mm->pgd), 25); - mtsp(vma->vm_mm->context, 3); - - flush_user_dcache_page(vmaddr); - if(vma->vm_flags & VM_EXEC) - flush_user_icache_page(vmaddr); - - /* put the old current process back */ - mtsp(space, 3); - mtctl(pgd, 25); - preempt_enable(); -} - - -static inline void -__flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr) -{ - if (likely(vma->vm_mm->context == mfsp(3))) { - flush_user_dcache_page(vmaddr); - if (vma->vm_flags & VM_EXEC) - flush_user_icache_page(vmaddr); - } else { - flush_user_cache_page_non_current(vma, vmaddr); - } + flush_dcache_page_asm(physaddr, vmaddr); + if (vma->vm_flags & VM_EXEC) + flush_icache_page_asm(physaddr, vmaddr); } void flush_dcache_page(struct page *page) @@ -342,10 +279,8 @@ void flush_dcache_page(struct page *page) struct vm_area_struct *mpnt; struct prio_tree_iter iter; unsigned long offset; - unsigned long addr; + unsigned long addr, old_addr = 0; pgoff_t pgoff; - unsigned long pfn = page_to_pfn(page); - if (mapping && !mapping_mapped(mapping)) { set_bit(PG_dcache_dirty, &page->flags); @@ -369,20 +304,11 @@ void flush_dcache_page(struct page *page) offset = (pgoff - mpnt->vm_pgoff) << PAGE_SHIFT; addr = mpnt->vm_start + offset; - /* Flush instructions produce non access tlb misses. - * On PA, we nullify these instructions rather than - * taking a page fault if the pte doesn't exist. - * This is just for speed. If the page translation - * isn't there, there's no point exciting the - * nadtlb handler into a nullification frenzy. - * - * Make sure we really have this page: the private - * mappings may cover this area but have COW'd this - * particular page. - */ - if (translation_exists(mpnt, addr, pfn)) { - __flush_cache_page(mpnt, addr); - break; + if (old_addr == 0 || (old_addr & (SHMLBA - 1)) != (addr & (SHMLBA - 1))) { + __flush_cache_page(mpnt, addr, page_to_phys(page)); + if (old_addr) + printk(KERN_ERR "INEQUIVALENT ALIASES 0x%lx and 0x%lx in file %s\n", old_addr, addr, mpnt->vm_file ? mpnt->vm_file->f_path.dentry->d_name.name : "(null)"); + old_addr = addr; } } flush_dcache_mmap_unlock(mapping); @@ -573,7 +499,6 @@ flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr, unsigned long { BUG_ON(!vma->vm_mm->context); - if (likely(translation_exists(vma, vmaddr, pfn))) - __flush_cache_page(vma, vmaddr); + __flush_cache_page(vma, vmaddr, page_to_phys(pfn_to_page(pfn))); } diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S index 6337adef30f..e8c119b61fc 100644 --- a/arch/parisc/kernel/entry.S +++ b/arch/parisc/kernel/entry.S @@ -225,22 +225,13 @@ #ifndef CONFIG_64BIT /* * naitlb miss interruption handler (parisc 1.1 - 32 bit) - * - * Note: naitlb misses will be treated - * as an ordinary itlb miss for now. - * However, note that naitlb misses - * have the faulting address in the - * IOR/ISR. */ .macro naitlb_11 code mfctl %isr,spc - b itlb_miss_11 + b naitlb_miss_11 mfctl %ior,va - /* FIXME: If user causes a naitlb miss, the priv level may not be in - * lower bits of va, where the itlb miss handler is expecting them - */ .align 32 .endm @@ -248,26 +239,17 @@ /* * naitlb miss interruption handler (parisc 2.0) - * - * Note: naitlb misses will be treated - * as an ordinary itlb miss for now. - * However, note that naitlb misses - * have the faulting address in the - * IOR/ISR. */ .macro naitlb_20 code mfctl %isr,spc #ifdef CONFIG_64BIT - b itlb_miss_20w + b naitlb_miss_20w #else - b itlb_miss_20 + b naitlb_miss_20 #endif mfctl %ior,va - /* FIXME: If user causes a naitlb miss, the priv level may not be in - * lower bits of va, where the itlb miss handler is expecting them - */ .align 32 .endm @@ -581,7 +563,24 @@ copy \va,\tmp1 depi 0,31,23,\tmp1 cmpb,COND(<>),n \tmp,\tmp1,\fault - ldi (_PAGE_DIRTY|_PAGE_WRITE|_PAGE_READ),\prot + mfctl %cr19,\tmp /* iir */ + /* get the opcode (first six bits) into \tmp */ + extrw,u \tmp,5,6,\tmp + /* + * Only setting the T bit prevents data cache movein + * Setting access rights to zero prevents instruction cache movein + * + * Note subtlety here: _PAGE_GATEWAY, _PAGE_EXEC and _PAGE_WRITE go + * to type field and _PAGE_READ goes to top bit of PL1 + */ + ldi (_PAGE_REFTRAP|_PAGE_READ|_PAGE_WRITE),\prot + /* + * so if the opcode is one (i.e. this is a memory management + * instruction) nullify the next load so \prot is only T. + * Otherwise this is a normal data operation + */ + cmpiclr,= 0x01,\tmp,%r0 + ldi (_PAGE_DIRTY|_PAGE_READ|_PAGE_WRITE),\prot depd,z \prot,8,7,\prot /* * OK, it is in the temp alias region, check whether "from" or "to". @@ -631,11 +630,7 @@ ENTRY(fault_vector_20) def 13 def 14 dtlb_20 15 -#if 0 naitlb_20 16 -#else - def 16 -#endif nadtlb_20 17 def 18 def 19 @@ -678,11 +673,7 @@ ENTRY(fault_vector_11) def 13 def 14 dtlb_11 15 -#if 0 naitlb_11 16 -#else - def 16 -#endif nadtlb_11 17 def 18 def 19 @@ -1203,7 +1194,7 @@ nadtlb_miss_20w: get_pgd spc,ptp space_check spc,t0,nadtlb_fault - L3_ptep ptp,pte,t0,va,nadtlb_check_flush_20w + L3_ptep ptp,pte,t0,va,nadtlb_check_alias_20w update_ptep ptp,pte,t0,t1 @@ -1214,6 +1205,14 @@ nadtlb_miss_20w: rfir nop +nadtlb_check_alias_20w: + do_alias spc,t0,t1,va,pte,prot,nadtlb_check_flush_20w + + idtlbt pte,prot + + rfir + nop + nadtlb_check_flush_20w: bb,>=,n pte,_PAGE_FLUSH_BIT,nadtlb_emulate @@ -1255,25 +1254,7 @@ dtlb_miss_11: nop dtlb_check_alias_11: - - /* Check to see if fault is in the temporary alias region */ - - cmpib,<>,n 0,spc,dtlb_fault /* forward */ - ldil L%(TMPALIAS_MAP_START),t0 - copy va,t1 - depwi 0,31,23,t1 - cmpb,<>,n t0,t1,dtlb_fault /* forward */ - ldi (_PAGE_DIRTY|_PAGE_WRITE|_PAGE_READ),prot - depw,z prot,8,7,prot - - /* - * OK, it is in the temp alias region, check whether "from" or "to". - * Check "subtle" note in pacache.S re: r23/r26. - */ - - extrw,u,= va,9,1,r0 - or,tr %r23,%r0,pte /* If "from" use "from" page */ - or %r26,%r0,pte /* else "to", use "to" page */ + do_alias spc,t0,t1,va,pte,prot,dtlb_fault idtlba pte,(va) idtlbp prot,(va) @@ -1286,7 +1267,7 @@ nadtlb_miss_11: space_check spc,t0,nadtlb_fault - L2_ptep ptp,pte,t0,va,nadtlb_check_flush_11 + L2_ptep ptp,pte,t0,va,nadtlb_check_alias_11 update_ptep ptp,pte,t0,t1 @@ -1304,6 +1285,15 @@ nadtlb_miss_11: rfir nop +nadtlb_check_alias_11: + do_alias spc,t0,t1,va,pte,prot,nadtlb_check_flush_11 + + idtlba pte,(va) + idtlbp prot,(va) + + rfir + nop + nadtlb_check_flush_11: bb,>=,n pte,_PAGE_FLUSH_BIT,nadtlb_emulate @@ -1359,7 +1349,7 @@ nadtlb_miss_20: space_check spc,t0,nadtlb_fault - L2_ptep ptp,pte,t0,va,nadtlb_check_flush_20 + L2_ptep ptp,pte,t0,va,nadtlb_check_alias_20 update_ptep ptp,pte,t0,t1 @@ -1372,6 +1362,14 @@ nadtlb_miss_20: rfir nop +nadtlb_check_alias_20: + do_alias spc,t0,t1,va,pte,prot,nadtlb_check_flush_20 + + idtlbt pte,prot + + rfir + nop + nadtlb_check_flush_20: bb,>=,n pte,_PAGE_FLUSH_BIT,nadtlb_emulate @@ -1484,6 +1482,36 @@ itlb_miss_20w: rfir nop +naitlb_miss_20w: + + /* + * I miss is a little different, since we allow users to fault + * on the gateway page which is in the kernel address space. + */ + + space_adjust spc,va,t0 + get_pgd spc,ptp + space_check spc,t0,naitlb_fault + + L3_ptep ptp,pte,t0,va,naitlb_check_alias_20w + + update_ptep ptp,pte,t0,t1 + + make_insert_tlb spc,pte,prot + + iitlbt pte,prot + + rfir + nop + +naitlb_check_alias_20w: + do_alias spc,t0,t1,va,pte,prot,naitlb_fault + + iitlbt pte,prot + + rfir + nop + #else itlb_miss_11: @@ -1508,6 +1536,38 @@ itlb_miss_11: rfir nop +naitlb_miss_11: + get_pgd spc,ptp + + space_check spc,t0,naitlb_fault + + L2_ptep ptp,pte,t0,va,naitlb_check_alias_11 + + update_ptep ptp,pte,t0,t1 + + make_insert_tlb_11 spc,pte,prot + + mfsp %sr1,t0 /* Save sr1 so we can use it in tlb inserts */ + mtsp spc,%sr1 + + iitlba pte,(%sr1,va) + iitlbp prot,(%sr1,va) + + mtsp t0, %sr1 /* Restore sr1 */ + + rfir + nop + +naitlb_check_alias_11: + do_alias spc,t0,t1,va,pte,prot,itlb_fault + + iitlba pte,(%sr0, va) + iitlbp prot,(%sr0, va) + + rfir + nop + + itlb_miss_20: get_pgd spc,ptp @@ -1526,6 +1586,32 @@ itlb_miss_20: rfir nop +naitlb_miss_20: + get_pgd spc,ptp + + space_check spc,t0,naitlb_fault + + L2_ptep ptp,pte,t0,va,naitlb_check_alias_20 + + update_ptep ptp,pte,t0,t1 + + make_insert_tlb spc,pte,prot + + f_extend pte,t0 + + iitlbt pte,prot + + rfir + nop + +naitlb_check_alias_20: + do_alias spc,t0,t1,va,pte,prot,naitlb_fault + + iitlbt pte,prot + + rfir + nop + #endif #ifdef CONFIG_64BIT @@ -1662,6 +1748,10 @@ nadtlb_fault: b intr_save ldi 17,%r8 +naitlb_fault: + b intr_save + ldi 16,%r8 + dtlb_fault: b intr_save ldi 15,%r8 diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S index 09b77b2553c..a85823668cb 100644 --- a/arch/parisc/kernel/pacache.S +++ b/arch/parisc/kernel/pacache.S @@ -608,93 +608,131 @@ ENTRY(__clear_user_page_asm) .procend ENDPROC(__clear_user_page_asm) -ENTRY(flush_kernel_dcache_page_asm) +ENTRY(flush_dcache_page_asm) .proc .callinfo NO_CALLS .entry + ldil L%(TMPALIAS_MAP_START), %r28 +#ifdef CONFIG_64BIT +#if (TMPALIAS_MAP_START >= 0x80000000) + depdi 0, 31,32, %r28 /* clear any sign extension */ + /* FIXME: page size dependend */ +#endif + extrd,u %r26, 56,32, %r26 /* convert phys addr to tlb insert format */ + depd %r25, 63,22, %r28 /* Form aliased virtual address 'to' */ + depdi 0, 63,12, %r28 /* Clear any offset bits */ +#else + extrw,u %r26, 24,25, %r26 /* convert phys addr to tlb insert format */ + depw %r25, 31,22, %r28 /* Form aliased virtual address 'to' */ + depwi 0, 31,12, %r28 /* Clear any offset bits */ +#endif + + /* Purge any old translation */ + + pdtlb 0(%r28) + ldil L%dcache_stride, %r1 - ldw R%dcache_stride(%r1), %r23 + ldw R%dcache_stride(%r1), %r1 #ifdef CONFIG_64BIT depdi,z 1, 63-PAGE_SHIFT,1, %r25 #else depwi,z 1, 31-PAGE_SHIFT,1, %r25 #endif - add %r26, %r25, %r25 - sub %r25, %r23, %r25 - - -1: fdc,m %r23(%r26) - fdc,m %r23(%r26) - fdc,m %r23(%r26) - fdc,m %r23(%r26) - fdc,m %r23(%r26) - fdc,m %r23(%r26) - fdc,m %r23(%r26) - fdc,m %r23(%r26) - fdc,m %r23(%r26) - fdc,m %r23(%r26) - fdc,m %r23(%r26) - fdc,m %r23(%r26) - fdc,m %r23(%r26) - fdc,m %r23(%r26) - fdc,m %r23(%r26) - cmpb,COND(<<) %r26, %r25,1b - fdc,m %r23(%r26) + add %r28, %r25, %r25 + sub %r25, %r1, %r25 + + +1: fdc,m %r1(%r28) + fdc,m %r1(%r28) + fdc,m %r1(%r28) + fdc,m %r1(%r28) + fdc,m %r1(%r28) + fdc,m %r1(%r28) + fdc,m %r1(%r28) + fdc,m %r1(%r28) + fdc,m %r1(%r28) + fdc,m %r1(%r28) + fdc,m %r1(%r28) + fdc,m %r1(%r28) + fdc,m %r1(%r28) + fdc,m %r1(%r28) + fdc,m %r1(%r28) + cmpb,COND(<<) %r28, %r25,1b + fdc,m %r1(%r28) sync bv %r0(%r2) - nop + pdtlb (%r25) .exit .procend -ENDPROC(flush_kernel_dcache_page_asm) - -ENTRY(flush_user_dcache_page) +ENDPROC(flush_dcache_page_asm) + +ENTRY(flush_icache_page_asm) .proc .callinfo NO_CALLS .entry - ldil L%dcache_stride, %r1 - ldw R%dcache_stride(%r1), %r23 - + ldil L%(TMPALIAS_MAP_START), %r28 #ifdef CONFIG_64BIT - depdi,z 1,63-PAGE_SHIFT,1, %r25 +#if (TMPALIAS_MAP_START >= 0x80000000) + depdi 0, 31,32, %r28 /* clear any sign extension */ + /* FIXME: page size dependend */ +#endif + extrd,u %r26, 56,32, %r26 /* convert phys addr to tlb insert format */ + depd %r25, 63,22, %r28 /* Form aliased virtual address 'to' */ + depdi 0, 63,12, %r28 /* Clear any offset bits */ #else - depwi,z 1,31-PAGE_SHIFT,1, %r25 + extrw,u %r26, 24,25, %r26 /* convert phys addr to tlb insert format */ + depw %r25, 31,22, %r28 /* Form aliased virtual address 'to' */ + depwi 0, 31,12, %r28 /* Clear any offset bits */ #endif - add %r26, %r25, %r25 - sub %r25, %r23, %r25 + /* Purge any old translation */ -1: fdc,m %r23(%sr3, %r26) - fdc,m %r23(%sr3, %r26) - fdc,m %r23(%sr3, %r26) - fdc,m %r23(%sr3, %r26) - fdc,m %r23(%sr3, %r26) - fdc,m %r23(%sr3, %r26) - fdc,m %r23(%sr3, %r26) - fdc,m %r23(%sr3, %r26) - fdc,m %r23(%sr3, %r26) - fdc,m %r23(%sr3, %r26) - fdc,m %r23(%sr3, %r26) - fdc,m %r23(%sr3, %r26) - fdc,m %r23(%sr3, %r26) - fdc,m %r23(%sr3, %r26) - fdc,m %r23(%sr3, %r26) - cmpb,COND(<<) %r26, %r25,1b - fdc,m %r23(%sr3, %r26) + pitlb (%sr0,%r28) + + ldil L%icache_stride, %r1 + ldw R%icache_stride(%r1), %r1 + +#ifdef CONFIG_64BIT + depdi,z 1, 63-PAGE_SHIFT,1, %r25 +#else + depwi,z 1, 31-PAGE_SHIFT,1, %r25 +#endif + add %r28, %r25, %r25 + sub %r25, %r1, %r25 + + +1: fic,m %r1(%r28) + fic,m %r1(%r28) + fic,m %r1(%r28) + fic,m %r1(%r28) + fic,m %r1(%r28) + fic,m %r1(%r28) + fic,m %r1(%r28) + fic,m %r1(%r28) + fic,m %r1(%r28) + fic,m %r1(%r28) + fic,m %r1(%r28) + fic,m %r1(%r28) + fic,m %r1(%r28) + fic,m %r1(%r28) + fic,m %r1(%r28) + cmpb,COND(<<) %r28, %r25,1b + fic,m %r1(%r28) sync bv %r0(%r2) - nop + pitlb (%sr0,%r25) .exit .procend -ENDPROC(flush_user_dcache_page) +ENDPROC(flush_icache_page_asm) -ENTRY(flush_user_icache_page) +ENTRY(flush_kernel_dcache_page_asm) .proc .callinfo NO_CALLS .entry @@ -711,23 +749,23 @@ ENTRY(flush_user_icache_page) sub %r25, %r23, %r25 -1: fic,m %r23(%sr3, %r26) - fic,m %r23(%sr3, %r26) - fic,m %r23(%sr3, %r26) - fic,m %r23(%sr3, %r26) - fic,m %r23(%sr3, %r26) - fic,m %r23(%sr3, %r26) - fic,m %r23(%sr3, %r26) - fic,m %r23(%sr3, %r26) - fic,m %r23(%sr3, %r26) - fic,m %r23(%sr3, %r26) - fic,m %r23(%sr3, %r26) - fic,m %r23(%sr3, %r26) - fic,m %r23(%sr3, %r26) - fic,m %r23(%sr3, %r26) - fic,m %r23(%sr3, %r26) +1: fdc,m %r23(%r26) + fdc,m %r23(%r26) + fdc,m %r23(%r26) + fdc,m %r23(%r26) + fdc,m %r23(%r26) + fdc,m %r23(%r26) + fdc,m %r23(%r26) + fdc,m %r23(%r26) + fdc,m %r23(%r26) + fdc,m %r23(%r26) + fdc,m %r23(%r26) + fdc,m %r23(%r26) + fdc,m %r23(%r26) + fdc,m %r23(%r26) + fdc,m %r23(%r26) cmpb,COND(<<) %r26, %r25,1b - fic,m %r23(%sr3, %r26) + fdc,m %r23(%r26) sync bv %r0(%r2) @@ -735,8 +773,7 @@ ENTRY(flush_user_icache_page) .exit .procend -ENDPROC(flush_user_icache_page) - +ENDPROC(flush_kernel_dcache_page_asm) ENTRY(purge_kernel_dcache_page) .proc @@ -780,69 +817,6 @@ ENTRY(purge_kernel_dcache_page) .procend ENDPROC(purge_kernel_dcache_page) -#if 0 - /* Currently not used, but it still is a possible alternate - * solution. - */ - -ENTRY(flush_alias_page) - .proc - .callinfo NO_CALLS - .entry - - tophys_r1 %r26 - - ldil L%(TMPALIAS_MAP_START), %r28 -#ifdef CONFIG_64BIT - extrd,u %r26, 56,32, %r26 /* convert phys addr to tlb insert format */ - depd %r25, 63,22, %r28 /* Form aliased virtual address 'to' */ - depdi 0, 63,12, %r28 /* Clear any offset bits */ -#else - extrw,u %r26, 24,25, %r26 /* convert phys addr to tlb insert format */ - depw %r25, 31,22, %r28 /* Form aliased virtual address 'to' */ - depwi 0, 31,12, %r28 /* Clear any offset bits */ -#endif - - /* Purge any old translation */ - - pdtlb 0(%r28) - - ldil L%dcache_stride, %r1 - ldw R%dcache_stride(%r1), %r23 - -#ifdef CONFIG_64BIT - depdi,z 1, 63-PAGE_SHIFT,1, %r29 -#else - depwi,z 1, 31-PAGE_SHIFT,1, %r29 -#endif - add %r28, %r29, %r29 - sub %r29, %r23, %r29 - -1: fdc,m %r23(%r28) - fdc,m %r23(%r28) - fdc,m %r23(%r28) - fdc,m %r23(%r28) - fdc,m %r23(%r28) - fdc,m %r23(%r28) - fdc,m %r23(%r28) - fdc,m %r23(%r28) - fdc,m %r23(%r28) - fdc,m %r23(%r28) - fdc,m %r23(%r28) - fdc,m %r23(%r28) - fdc,m %r23(%r28) - fdc,m %r23(%r28) - fdc,m %r23(%r28) - cmpb,COND(<<) %r28, %r29, 1b - fdc,m %r23(%r28) - - sync - bv %r0(%r2) - nop - .exit - - .procend -#endif .export flush_user_dcache_range_asm @@ -865,7 +839,6 @@ flush_user_dcache_range_asm: .exit .procend -ENDPROC(flush_alias_page) ENTRY(flush_kernel_dcache_range_asm) .proc -- cgit v1.2.3-18-g5258 From 8b4ae3342dbcb6a0def3a7b3ae7aee633a81e758 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Wed, 22 Dec 2010 10:24:36 -0600 Subject: eliminate special FLUSH flag from page table This was used to flush a region even if the page table entry had been cleared. In theory this was never necessary, but now we've switched to alias based flushing, the whole set of code associated with it can be dumped. Signed-off-by: James Bottomley Signed-off-by: James Bottomley --- arch/parisc/include/asm/pgtable.h | 14 +++------ arch/parisc/kernel/entry.S | 61 ++------------------------------------- 2 files changed, 7 insertions(+), 68 deletions(-) (limited to 'arch') diff --git a/arch/parisc/include/asm/pgtable.h b/arch/parisc/include/asm/pgtable.h index 865f37a8a88..f3c09737e89 100644 --- a/arch/parisc/include/asm/pgtable.h +++ b/arch/parisc/include/asm/pgtable.h @@ -136,8 +136,7 @@ #define _PAGE_NO_CACHE_BIT 24 /* (0x080) Uncached Page (U bit) */ #define _PAGE_ACCESSED_BIT 23 /* (0x100) Software: Page Accessed */ #define _PAGE_PRESENT_BIT 22 /* (0x200) Software: translation valid */ -#define _PAGE_FLUSH_BIT 21 /* (0x400) Software: translation valid */ - /* for cache flushing only */ +/* bit 21 was formerly the FLUSH bit but is now unused */ #define _PAGE_USER_BIT 20 /* (0x800) Software: User accessible page */ /* N.B. The bits are defined in terms of a 32 bit word above, so the */ @@ -171,7 +170,6 @@ #define _PAGE_NO_CACHE (1 << xlate_pabit(_PAGE_NO_CACHE_BIT)) #define _PAGE_ACCESSED (1 << xlate_pabit(_PAGE_ACCESSED_BIT)) #define _PAGE_PRESENT (1 << xlate_pabit(_PAGE_PRESENT_BIT)) -#define _PAGE_FLUSH (1 << xlate_pabit(_PAGE_FLUSH_BIT)) #define _PAGE_USER (1 << xlate_pabit(_PAGE_USER_BIT)) #define _PAGE_FILE (1 << xlate_pabit(_PAGE_FILE_BIT)) @@ -211,7 +209,6 @@ #define PAGE_KERNEL_RO __pgprot(_PAGE_KERNEL & ~_PAGE_WRITE) #define PAGE_KERNEL_UNC __pgprot(_PAGE_KERNEL | _PAGE_NO_CACHE) #define PAGE_GATEWAY __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED | _PAGE_GATEWAY| _PAGE_READ) -#define PAGE_FLUSH __pgprot(_PAGE_FLUSH) /* @@ -259,7 +256,7 @@ extern unsigned long *empty_zero_page; #define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page)) -#define pte_none(x) ((pte_val(x) == 0) || (pte_val(x) & _PAGE_FLUSH)) +#define pte_none(x) (pte_val(x) == 0) #define pte_present(x) (pte_val(x) & _PAGE_PRESENT) #define pte_clear(mm,addr,xp) do { pte_val(*(xp)) = 0; } while (0) @@ -442,13 +439,10 @@ struct mm_struct; static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { pte_t old_pte; - pte_t pte; spin_lock(&pa_dbit_lock); - pte = old_pte = *ptep; - pte_val(pte) &= ~_PAGE_PRESENT; - pte_val(pte) |= _PAGE_FLUSH; - set_pte_at(mm,addr,ptep,pte); + old_pte = *ptep; + pte_clear(mm,addr,ptep); spin_unlock(&pa_dbit_lock); return old_pte; diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S index e8c119b61fc..e5477092a5d 100644 --- a/arch/parisc/kernel/entry.S +++ b/arch/parisc/kernel/entry.S @@ -1206,23 +1206,7 @@ nadtlb_miss_20w: nop nadtlb_check_alias_20w: - do_alias spc,t0,t1,va,pte,prot,nadtlb_check_flush_20w - - idtlbt pte,prot - - rfir - nop - -nadtlb_check_flush_20w: - bb,>=,n pte,_PAGE_FLUSH_BIT,nadtlb_emulate - - /* Insert a "flush only" translation */ - - depdi,z 7,7,3,prot - depdi 1,10,1,prot - - /* Drop prot bits from pte and convert to page addr for idtlbt */ - convert_for_tlb_insert20 pte + do_alias spc,t0,t1,va,pte,prot,nadtlb_emulate idtlbt pte,prot @@ -1286,7 +1270,7 @@ nadtlb_miss_11: nop nadtlb_check_alias_11: - do_alias spc,t0,t1,va,pte,prot,nadtlb_check_flush_11 + do_alias spc,t0,t1,va,pte,prot,nadtlb_emulate idtlba pte,(va) idtlbp prot,(va) @@ -1294,30 +1278,6 @@ nadtlb_check_alias_11: rfir nop -nadtlb_check_flush_11: - bb,>=,n pte,_PAGE_FLUSH_BIT,nadtlb_emulate - - /* Insert a "flush only" translation */ - - zdepi 7,7,3,prot - depi 1,10,1,prot - - /* Get rid of prot bits and convert to page addr for idtlba */ - - depi 0,31,ASM_PFN_PTE_SHIFT,pte - SHRREG pte,(ASM_PFN_PTE_SHIFT-(31-26)),pte - - mfsp %sr1,t0 /* Save sr1 so we can use it in tlb inserts */ - mtsp spc,%sr1 - - idtlba pte,(%sr1,va) - idtlbp prot,(%sr1,va) - - mtsp t0, %sr1 /* Restore sr1 */ - - rfir - nop - dtlb_miss_20: space_adjust spc,va,t0 get_pgd spc,ptp @@ -1363,28 +1323,13 @@ nadtlb_miss_20: nop nadtlb_check_alias_20: - do_alias spc,t0,t1,va,pte,prot,nadtlb_check_flush_20 + do_alias spc,t0,t1,va,pte,prot,nadtlb_emulate idtlbt pte,prot rfir nop -nadtlb_check_flush_20: - bb,>=,n pte,_PAGE_FLUSH_BIT,nadtlb_emulate - - /* Insert a "flush only" translation */ - - depdi,z 7,7,3,prot - depdi 1,10,1,prot - - /* Drop prot bits from pte and convert to page addr for idtlbt */ - convert_for_tlb_insert20 pte - - idtlbt pte,prot - - rfir - nop #endif nadtlb_emulate: -- cgit v1.2.3-18-g5258 From 1da09c43ce5f4fcd98143feb7d2513fe6fd62848 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 18 Jan 2011 19:56:04 +0900 Subject: sh: pci: Support asynchronous initialization of SH-X3 PCIe channels. SH-X3 controllers all have pretty dire delays needed for PHY wakeup, so we attempt to mitigate the damage by bringing them up asynchronously, simply using the synchronization points for persistent bridge to channel numbering. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/pcie-sh7786.c | 46 ++++++++++++++++++++++++--------------- 1 file changed, 28 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/sh/drivers/pci/pcie-sh7786.c b/arch/sh/drivers/pci/pcie-sh7786.c index 96e9b058aa1..ada2e6926f0 100644 --- a/arch/sh/drivers/pci/pcie-sh7786.c +++ b/arch/sh/drivers/pci/pcie-sh7786.c @@ -1,16 +1,19 @@ /* * Low-Level PCI Express Support for the SH7786 * - * Copyright (C) 2009 - 2010 Paul Mundt + * Copyright (C) 2009 - 2011 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. */ +#define pr_fmt(fmt) "PCI: " fmt + #include #include #include #include +#include #include #include #include @@ -31,7 +34,7 @@ static unsigned int nr_ports; static struct sh7786_pcie_hwops { int (*core_init)(void); - int (*port_init_hw)(struct sh7786_pcie_port *port); + async_func_ptr *port_init_hw; } *sh7786_pcie_hwops; static struct resource sh7786_pci0_resources[] = { @@ -474,8 +477,9 @@ static int __init sh7786_pcie_core_init(void) return test_mode_pin(MODE_PIN12) ? 3 : 2; } -static int __init sh7786_pcie_init_hw(struct sh7786_pcie_port *port) +static void __init sh7786_pcie_init_hw(void *data, async_cookie_t cookie) { + struct sh7786_pcie_port *port = data; int ret; /* @@ -488,18 +492,30 @@ static int __init sh7786_pcie_init_hw(struct sh7786_pcie_port *port) * Setup clocks, needed both for PHY and PCIe registers. */ ret = pcie_clk_init(port); - if (unlikely(ret < 0)) - return ret; + if (unlikely(ret < 0)) { + pr_err("clock initialization failed for port#%d\n", + port->index); + return; + } ret = phy_init(port); - if (unlikely(ret < 0)) - return ret; + if (unlikely(ret < 0)) { + pr_err("phy initialization failed for port#%d\n", + port->index); + return; + } ret = pcie_init(port); - if (unlikely(ret < 0)) - return ret; + if (unlikely(ret < 0)) { + pr_err("core initialization failed for port#%d\n", + port->index); + return; + } - return register_pci_controller(port->hose); + /* In the interest of preserving device ordering, synchronize */ + async_synchronize_cookie(cookie); + + register_pci_controller(port->hose); } static struct sh7786_pcie_hwops sh7786_65nm_pcie_hwops __initdata = { @@ -510,7 +526,7 @@ static struct sh7786_pcie_hwops sh7786_65nm_pcie_hwops __initdata = { static int __init sh7786_pcie_init(void) { struct clk *platclk; - int ret = 0, i; + int i; printk(KERN_NOTICE "PCI: Starting initialization.\n"); @@ -552,13 +568,7 @@ static int __init sh7786_pcie_init(void) port->hose = sh7786_pci_channels + i; port->hose->io_map_base = port->hose->resources[0].start; - ret |= sh7786_pcie_hwops->port_init_hw(port); - } - - if (unlikely(ret)) { - clk_disable(platclk); - clk_put(platclk); - return ret; + async_schedule(sh7786_pcie_hwops->port_init_hw, port); } return 0; -- cgit v1.2.3-18-g5258 From a929dcf70ed74b8ff52b6fca54f6ebb463e829f4 Mon Sep 17 00:00:00 2001 From: Jason Liu Date: Tue, 11 Jan 2011 05:44:29 +0800 Subject: ARM i.MX50: Rename devices-mx50.h MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There are devices-imx51.h and devices-imx53.h under arch/arm/mach-mx5 directory. So, had better rename devices-mx50.h to devices-imx50.h to follow the same naming convention with imx51 and imx53 part. Signed-off-by: Jason Liu Acked-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/board-mx50_rdp.c | 2 +- arch/arm/mach-mx5/devices-imx50.h | 26 ++++++++++++++++++++++++++ arch/arm/mach-mx5/devices-mx50.h | 26 -------------------------- 3 files changed, 27 insertions(+), 27 deletions(-) create mode 100644 arch/arm/mach-mx5/devices-imx50.h delete mode 100644 arch/arm/mach-mx5/devices-mx50.h (limited to 'arch') diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-mx5/board-mx50_rdp.c index fd32e4c450e..e5bb600b4cb 100644 --- a/arch/arm/mach-mx5/board-mx50_rdp.c +++ b/arch/arm/mach-mx5/board-mx50_rdp.c @@ -35,7 +35,7 @@ #include #include -#include "devices-mx50.h" +#include "devices-imx50.h" static iomux_v3_cfg_t mx50_rdp_pads[] __initdata = { /* SD1 */ diff --git a/arch/arm/mach-mx5/devices-imx50.h b/arch/arm/mach-mx5/devices-imx50.h new file mode 100644 index 00000000000..98ab07468a0 --- /dev/null +++ b/arch/arm/mach-mx5/devices-imx50.h @@ -0,0 +1,26 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include +#include + +extern const struct imx_imx_uart_1irq_data imx50_imx_uart_data[] __initconst; +#define imx50_add_imx_uart(id, pdata) \ + imx_add_imx_uart_1irq(&imx50_imx_uart_data[id], pdata) diff --git a/arch/arm/mach-mx5/devices-mx50.h b/arch/arm/mach-mx5/devices-mx50.h deleted file mode 100644 index 98ab07468a0..00000000000 --- a/arch/arm/mach-mx5/devices-mx50.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include -#include - -extern const struct imx_imx_uart_1irq_data imx50_imx_uart_data[] __initconst; -#define imx50_add_imx_uart(id, pdata) \ - imx_add_imx_uart_1irq(&imx50_imx_uart_data[id], pdata) -- cgit v1.2.3-18-g5258 From 82c520dccf7fd5afcd95b941f48c25f38c162c77 Mon Sep 17 00:00:00 2001 From: Richard Zhao Date: Fri, 14 Jan 2011 17:48:03 +0800 Subject: arm: mx50_rdp: add fec support Signed-off-by: Richard Zhao Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/Kconfig | 1 + arch/arm/mach-mx5/board-mx50_rdp.c | 22 ++++++++++++++++++++-- arch/arm/mach-mx5/devices-imx50.h | 5 +++++ arch/arm/plat-mxc/devices/platform-fec.c | 5 +++++ 4 files changed, 31 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index de4fa992fc3..af8749b04ff 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -157,6 +157,7 @@ config MACH_MX50_RDP select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select IMX_HAVE_PLATFORM_SPI_IMX + select IMX_HAVE_PLATFORM_FEC help Include support for MX50 reference design platform (RDP) board. This includes specific configurations for the board and its peripherals. diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-mx5/board-mx50_rdp.c index e5bb600b4cb..3180d43aece 100644 --- a/arch/arm/mach-mx5/board-mx50_rdp.c +++ b/arch/arm/mach-mx5/board-mx50_rdp.c @@ -37,6 +37,9 @@ #include "devices-imx50.h" +#define FEC_EN IMX_GPIO_NR(6, 23) +#define FEC_RESET_B IMX_GPIO_NR(4, 12) + static iomux_v3_cfg_t mx50_rdp_pads[] __initdata = { /* SD1 */ MX50_PAD_ECSPI2_SS0__GPIO_4_19, @@ -102,7 +105,7 @@ static iomux_v3_cfg_t mx50_rdp_pads[] __initdata = { MX50_PAD_I2C3_SCL__USBOTG_OC, MX50_PAD_SSI_RXC__FEC_MDIO, - MX50_PAD_SSI_RXC__FEC_MDIO, + MX50_PAD_SSI_RXFS__FEC_MDC, MX50_PAD_DISP_D0__FEC_TXCLK, MX50_PAD_DISP_D1__FEC_RX_ER, MX50_PAD_DISP_D2__FEC_RX_DV, @@ -111,7 +114,6 @@ static iomux_v3_cfg_t mx50_rdp_pads[] __initdata = { MX50_PAD_DISP_D5__FEC_TX_EN, MX50_PAD_DISP_D6__FEC_TXD1, MX50_PAD_DISP_D7__FEC_TXD0, - MX50_PAD_SSI_RXFS__FEC_MDC, MX50_PAD_I2C3_SDA__GPIO_6_23, MX50_PAD_ECSPI1_SCLK__GPIO_4_12, @@ -168,6 +170,20 @@ static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; +static const struct fec_platform_data fec_data __initconst = { + .phy = PHY_INTERFACE_MODE_RMII, +}; + +static inline void mx50_rdp_fec_reset(void) +{ + gpio_request(FEC_EN, "fec-en"); + gpio_direction_output(FEC_EN, 0); + gpio_request(FEC_RESET_B, "fec-reset_b"); + gpio_direction_output(FEC_RESET_B, 0); + msleep(1); + gpio_set_value(FEC_RESET_B, 1); +} + /* * Board specific initialization. */ @@ -178,6 +194,8 @@ static void __init mx50_rdp_board_init(void) imx50_add_imx_uart(0, &uart_pdata); imx50_add_imx_uart(1, &uart_pdata); + mx50_rdp_fec_reset(); + imx50_add_fec(&fec_data); } static void __init mx50_rdp_timer_init(void) diff --git a/arch/arm/mach-mx5/devices-imx50.h b/arch/arm/mach-mx5/devices-imx50.h index 98ab07468a0..e1093dbaa78 100644 --- a/arch/arm/mach-mx5/devices-imx50.h +++ b/arch/arm/mach-mx5/devices-imx50.h @@ -24,3 +24,8 @@ extern const struct imx_imx_uart_1irq_data imx50_imx_uart_data[] __initconst; #define imx50_add_imx_uart(id, pdata) \ imx_add_imx_uart_1irq(&imx50_imx_uart_data[id], pdata) + +extern const struct imx_fec_data imx50_fec_data __initconst; +#define imx50_add_fec(pdata) \ + imx_add_fec(&imx50_fec_data, pdata) + diff --git a/arch/arm/plat-mxc/devices/platform-fec.c b/arch/arm/plat-mxc/devices/platform-fec.c index b50c3517d08..4f529964224 100644 --- a/arch/arm/plat-mxc/devices/platform-fec.c +++ b/arch/arm/plat-mxc/devices/platform-fec.c @@ -31,6 +31,11 @@ const struct imx_fec_data imx35_fec_data __initconst = imx_fec_data_entry_single(MX35); #endif +#ifdef CONFIG_SOC_IMX50 +const struct imx_fec_data imx50_fec_data __initconst = + imx_fec_data_entry_single(MX50); +#endif + #ifdef CONFIG_SOC_IMX51 const struct imx_fec_data imx51_fec_data __initconst = imx_fec_data_entry_single(MX51); -- cgit v1.2.3-18-g5258 From 98b7d550f292ae96f1058f19b83aadd6985a6fa0 Mon Sep 17 00:00:00 2001 From: Richard Zhao Date: Fri, 14 Jan 2011 17:48:04 +0800 Subject: arm: mx50_rdp: add i2c bus support Signed-off-by: Richard Zhao Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/board-mx50_rdp.c | 7 +++++++ arch/arm/mach-mx5/devices-imx50.h | 3 +++ arch/arm/plat-mxc/devices/platform-imx-i2c.c | 10 ++++++++++ 3 files changed, 20 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-mx5/board-mx50_rdp.c index 3180d43aece..75beef74b37 100644 --- a/arch/arm/mach-mx5/board-mx50_rdp.c +++ b/arch/arm/mach-mx5/board-mx50_rdp.c @@ -184,6 +184,10 @@ static inline void mx50_rdp_fec_reset(void) gpio_set_value(FEC_RESET_B, 1); } +static const struct imxi2c_platform_data i2c_data __initconst = { + .bitrate = 100000, +}; + /* * Board specific initialization. */ @@ -196,6 +200,9 @@ static void __init mx50_rdp_board_init(void) imx50_add_imx_uart(1, &uart_pdata); mx50_rdp_fec_reset(); imx50_add_fec(&fec_data); + imx50_add_imx_i2c(0, &i2c_data); + imx50_add_imx_i2c(1, &i2c_data); + imx50_add_imx_i2c(2, &i2c_data); } static void __init mx50_rdp_timer_init(void) diff --git a/arch/arm/mach-mx5/devices-imx50.h b/arch/arm/mach-mx5/devices-imx50.h index e1093dbaa78..c9e42823c7e 100644 --- a/arch/arm/mach-mx5/devices-imx50.h +++ b/arch/arm/mach-mx5/devices-imx50.h @@ -29,3 +29,6 @@ extern const struct imx_fec_data imx50_fec_data __initconst; #define imx50_add_fec(pdata) \ imx_add_fec(&imx50_fec_data, pdata) +extern const struct imx_imx_i2c_data imx50_imx_i2c_data[] __initconst; +#define imx50_add_imx_i2c(id, pdata) \ + imx_add_imx_i2c(&imx50_imx_i2c_data[id], pdata) diff --git a/arch/arm/plat-mxc/devices/platform-imx-i2c.c b/arch/arm/plat-mxc/devices/platform-imx-i2c.c index 7ba94e1bbda..2ab74f0da9a 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-i2c.c +++ b/arch/arm/plat-mxc/devices/platform-imx-i2c.c @@ -69,6 +69,16 @@ const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst = { }; #endif /* ifdef CONFIG_SOC_IMX35 */ +#ifdef CONFIG_SOC_IMX50 +const struct imx_imx_i2c_data imx50_imx_i2c_data[] __initconst = { +#define imx50_imx_i2c_data_entry(_id, _hwid) \ + imx_imx_i2c_data_entry(MX50, _id, _hwid, SZ_4K) + imx50_imx_i2c_data_entry(0, 1), + imx50_imx_i2c_data_entry(1, 2), + imx50_imx_i2c_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_SOC_IMX51 */ + #ifdef CONFIG_SOC_IMX51 const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst = { #define imx51_imx_i2c_data_entry(_id, _hwid) \ -- cgit v1.2.3-18-g5258 From 00c89c1d1831225bb89b0627e02d0d3f875ec0a4 Mon Sep 17 00:00:00 2001 From: Marc Reilly Date: Sat, 15 Jan 2011 11:36:57 +1100 Subject: Introduce VPR200 board. Signed-off-by: Marc Reilly Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/Kconfig | 14 ++ arch/arm/mach-mx3/Makefile | 1 + arch/arm/mach-mx3/mach-vpr200.c | 327 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 342 insertions(+) create mode 100644 arch/arm/mach-mx3/mach-vpr200.c (limited to 'arch') diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index 0717f887cba..de80d980fe6 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -229,4 +229,18 @@ config MACH_EUKREA_MBIMXSD35_BASEBOARD endchoice +config MACH_VPR200 + bool "Support VPR200 platform" + select SOC_IMX35 + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + help + Include support for VPR200 platform. This includes specific + configurations for the board and its peripherals. + endif diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile index 8db13294ad2..bc7294f8701 100644 --- a/arch/arm/mach-mx3/Makefile +++ b/arch/arm/mach-mx3/Makefile @@ -22,3 +22,4 @@ obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o obj-$(CONFIG_MACH_EUKREA_CPUIMX35) += mach-cpuimx35.o obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd-baseboard.o +obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o diff --git a/arch/arm/mach-mx3/mach-vpr200.c b/arch/arm/mach-mx3/mach-vpr200.c new file mode 100644 index 00000000000..22ec78a7991 --- /dev/null +++ b/arch/arm/mach-mx3/mach-vpr200.c @@ -0,0 +1,327 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2009 Marc Kleine-Budde, Pengutronix + * Copyright 2010 Creative Product Design + * + * Derived from mx35 3stack. + * Original author: Fabio Estevam + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "devices-imx35.h" +#include "devices.h" + +#define GPIO_LCDPWR IMX_GPIO_NR(1, 2) +#define GPIO_PMIC_INT IMX_GPIO_NR(2, 0) + +#define GPIO_BUTTON1 IMX_GPIO_NR(1, 4) +#define GPIO_BUTTON2 IMX_GPIO_NR(1, 5) +#define GPIO_BUTTON3 IMX_GPIO_NR(1, 7) +#define GPIO_BUTTON4 IMX_GPIO_NR(1, 8) +#define GPIO_BUTTON5 IMX_GPIO_NR(1, 9) +#define GPIO_BUTTON6 IMX_GPIO_NR(1, 10) +#define GPIO_BUTTON7 IMX_GPIO_NR(1, 11) +#define GPIO_BUTTON8 IMX_GPIO_NR(1, 12) + +static const struct fb_videomode fb_modedb[] = { + { + /* 800x480 @ 60 Hz */ + .name = "PT0708048", + .refresh = 60, + .xres = 800, + .yres = 480, + .pixclock = KHZ2PICOS(33260), + .left_margin = 50, + .right_margin = 156, + .upper_margin = 10, + .lower_margin = 10, + .hsync_len = 1, /* note: DE only display */ + .vsync_len = 1, /* note: DE only display */ + .sync = FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, { + /* 800x480 @ 60 Hz */ + .name = "CTP-CLAA070LC0ACW", + .refresh = 60, + .xres = 800, + .yres = 480, + .pixclock = KHZ2PICOS(27000), + .left_margin = 50, + .right_margin = 50, /* whole line should have 900 clocks */ + .upper_margin = 10, + .lower_margin = 10, /* whole frame should have 500 lines */ + .hsync_len = 1, /* note: DE only display */ + .vsync_len = 1, /* note: DE only display */ + .sync = FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + } +}; + +static struct ipu_platform_data mx3_ipu_data = { + .irq_base = MXC_IPU_IRQ_START, +}; + +static struct mx3fb_platform_data mx3fb_pdata = { + .dma_dev = &mx3_ipu.dev, + .name = "PT0708048", + .mode = fb_modedb, + .num_modes = ARRAY_SIZE(fb_modedb), +}; + +static struct physmap_flash_data vpr200_flash_data = { + .width = 2, +}; + +static struct resource vpr200_flash_resource = { + .start = MX35_CS0_BASE_ADDR, + .end = MX35_CS0_BASE_ADDR + SZ_64M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device vpr200_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &vpr200_flash_data, + }, + .resource = &vpr200_flash_resource, + .num_resources = 1, +}; + +static const struct mxc_nand_platform_data + vpr200_nand_board_info __initconst = { + .width = 1, + .hw_ecc = 1, + .flash_bbt = 1, +}; + +#define VPR_KEY_DEBOUNCE 500 +static struct gpio_keys_button vpr200_gpio_keys_table[] = { + {KEY_F2, GPIO_BUTTON1, 1, "vpr-keys: F2", 0, VPR_KEY_DEBOUNCE}, + {KEY_F3, GPIO_BUTTON2, 1, "vpr-keys: F3", 0, VPR_KEY_DEBOUNCE}, + {KEY_F4, GPIO_BUTTON3, 1, "vpr-keys: F4", 0, VPR_KEY_DEBOUNCE}, + {KEY_F5, GPIO_BUTTON4, 1, "vpr-keys: F5", 0, VPR_KEY_DEBOUNCE}, + {KEY_F6, GPIO_BUTTON5, 1, "vpr-keys: F6", 0, VPR_KEY_DEBOUNCE}, + {KEY_F7, GPIO_BUTTON6, 1, "vpr-keys: F7", 0, VPR_KEY_DEBOUNCE}, + {KEY_F8, GPIO_BUTTON7, 1, "vpr-keys: F8", 1, VPR_KEY_DEBOUNCE}, + {KEY_F9, GPIO_BUTTON8, 1, "vpr-keys: F9", 1, VPR_KEY_DEBOUNCE}, +}; + +static struct gpio_keys_platform_data vpr200_gpio_keys_data = { + .buttons = vpr200_gpio_keys_table, + .nbuttons = ARRAY_SIZE(vpr200_gpio_keys_table), +}; + +static struct platform_device vpr200_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &vpr200_gpio_keys_data, + } +}; + +static struct mc13xxx_platform_data vpr200_pmic = { + .flags = MC13XXX_USE_ADC | MC13XXX_USE_TOUCHSCREEN, +}; + +static const struct imxi2c_platform_data vpr200_i2c0_data __initconst = { + .bitrate = 50000, +}; + +static struct at24_platform_data vpr200_eeprom = { + .byte_len = 2048 / 8, + .page_size = 1, +}; + +static struct i2c_board_info vpr200_i2c_devices[] = { + { + I2C_BOARD_INFO("at24", 0x50), /* E0=0, E1=0, E2=0 */ + .platform_data = &vpr200_eeprom, + }, { + I2C_BOARD_INFO("mc13892", 0x08), + .platform_data = &vpr200_pmic, + .irq = gpio_to_irq(GPIO_PMIC_INT), + } +}; + +static iomux_v3_cfg_t vpr200_pads[] = { + /* UART1 */ + MX35_PAD_TXD1__UART1_TXD_MUX, + MX35_PAD_RXD1__UART1_RXD_MUX, + /* UART3 */ + MX35_PAD_ATA_DATA10__UART3_RXD_MUX, + MX35_PAD_ATA_DATA11__UART3_TXD_MUX, + /* FEC */ + MX35_PAD_FEC_TX_CLK__FEC_TX_CLK, + MX35_PAD_FEC_RX_CLK__FEC_RX_CLK, + MX35_PAD_FEC_RX_DV__FEC_RX_DV, + MX35_PAD_FEC_COL__FEC_COL, + MX35_PAD_FEC_RDATA0__FEC_RDATA_0, + MX35_PAD_FEC_TDATA0__FEC_TDATA_0, + MX35_PAD_FEC_TX_EN__FEC_TX_EN, + MX35_PAD_FEC_MDC__FEC_MDC, + MX35_PAD_FEC_MDIO__FEC_MDIO, + MX35_PAD_FEC_TX_ERR__FEC_TX_ERR, + MX35_PAD_FEC_RX_ERR__FEC_RX_ERR, + MX35_PAD_FEC_CRS__FEC_CRS, + MX35_PAD_FEC_RDATA1__FEC_RDATA_1, + MX35_PAD_FEC_TDATA1__FEC_TDATA_1, + MX35_PAD_FEC_RDATA2__FEC_RDATA_2, + MX35_PAD_FEC_TDATA2__FEC_TDATA_2, + MX35_PAD_FEC_RDATA3__FEC_RDATA_3, + MX35_PAD_FEC_TDATA3__FEC_TDATA_3, + /* Display */ + MX35_PAD_LD0__IPU_DISPB_DAT_0, + MX35_PAD_LD1__IPU_DISPB_DAT_1, + MX35_PAD_LD2__IPU_DISPB_DAT_2, + MX35_PAD_LD3__IPU_DISPB_DAT_3, + MX35_PAD_LD4__IPU_DISPB_DAT_4, + MX35_PAD_LD5__IPU_DISPB_DAT_5, + MX35_PAD_LD6__IPU_DISPB_DAT_6, + MX35_PAD_LD7__IPU_DISPB_DAT_7, + MX35_PAD_LD8__IPU_DISPB_DAT_8, + MX35_PAD_LD9__IPU_DISPB_DAT_9, + MX35_PAD_LD10__IPU_DISPB_DAT_10, + MX35_PAD_LD11__IPU_DISPB_DAT_11, + MX35_PAD_LD12__IPU_DISPB_DAT_12, + MX35_PAD_LD13__IPU_DISPB_DAT_13, + MX35_PAD_LD14__IPU_DISPB_DAT_14, + MX35_PAD_LD15__IPU_DISPB_DAT_15, + MX35_PAD_LD16__IPU_DISPB_DAT_16, + MX35_PAD_LD17__IPU_DISPB_DAT_17, + MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK, + MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY, + MX35_PAD_CONTRAST__IPU_DISPB_CONTR, + /* LCD Enable */ + MX35_PAD_D3_VSYNC__GPIO1_2, + /* USBOTG */ + MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR, + MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC, + /* SDCARD */ + MX35_PAD_SD1_CMD__ESDHC1_CMD, + MX35_PAD_SD1_CLK__ESDHC1_CLK, + MX35_PAD_SD1_DATA0__ESDHC1_DAT0, + MX35_PAD_SD1_DATA1__ESDHC1_DAT1, + MX35_PAD_SD1_DATA2__ESDHC1_DAT2, + MX35_PAD_SD1_DATA3__ESDHC1_DAT3, + /* PMIC */ + MX35_PAD_GPIO2_0__GPIO2_0, + /* GPIO keys */ + MX35_PAD_SCKR__GPIO1_4, + MX35_PAD_COMPARE__GPIO1_5, + MX35_PAD_SCKT__GPIO1_7, + MX35_PAD_FST__GPIO1_8, + MX35_PAD_HCKT__GPIO1_9, + MX35_PAD_TX5_RX0__GPIO1_10, + MX35_PAD_TX4_RX1__GPIO1_11, + MX35_PAD_TX3_RX2__GPIO1_12, +}; + +/* USB Device config */ +static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_UTMI, + .workaround = FLS_USB2_WORKAROUND_ENGCM09152, +}; + +/* USB HOST config */ +static const struct mxc_usbh_platform_data usb_host_pdata __initconst = { + .portsc = MXC_EHCI_MODE_SERIAL, + .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | + MXC_EHCI_INTERNAL_PHY, +}; + +static struct platform_device *devices[] __initdata = { + &vpr200_flash, + &vpr200_device_gpiokeys, +}; + +/* + * Board specific initialization. + */ +static void __init vpr200_board_init(void) +{ + mxc_iomux_v3_setup_multiple_pads(vpr200_pads, ARRAY_SIZE(vpr200_pads)); + + imx35_add_fec(NULL); + imx35_add_imx2_wdt(NULL); + + platform_add_devices(devices, ARRAY_SIZE(devices)); + + if (0 != gpio_request(GPIO_LCDPWR, "LCDPWR")) + printk(KERN_WARNING "vpr200: Couldn't get LCDPWR gpio\n"); + else + gpio_direction_output(GPIO_LCDPWR, 0); + + if (0 != gpio_request(GPIO_PMIC_INT, "PMIC_INT")) + printk(KERN_WARNING "vpr200: Couldn't get PMIC_INT gpio\n"); + else + gpio_direction_input(GPIO_PMIC_INT); + + imx35_add_imx_uart0(NULL); + imx35_add_imx_uart2(NULL); + + mxc_register_device(&mx3_ipu, &mx3_ipu_data); + mxc_register_device(&mx3_fb, &mx3fb_pdata); + + imx35_add_fsl_usb2_udc(&otg_device_pdata); + imx35_add_mxc_ehci_hs(&usb_host_pdata); + + imx35_add_mxc_nand(&vpr200_nand_board_info); + imx35_add_sdhci_esdhc_imx(0, NULL); + + i2c_register_board_info(0, vpr200_i2c_devices, + ARRAY_SIZE(vpr200_i2c_devices)); + + imx35_add_imx_i2c0(&vpr200_i2c0_data); +} + +static void __init vpr200_timer_init(void) +{ + mx35_clocks_init(); +} + +struct sys_timer vpr200_timer = { + .init = vpr200_timer_init, +}; + +MACHINE_START(VPR200, "VPR200") + /* Maintainer: Creative Product Design */ + .map_io = mx35_map_io, + .init_irq = mx35_init_irq, + .init_machine = vpr200_board_init, + .timer = &vpr200_timer, +MACHINE_END -- cgit v1.2.3-18-g5258 From 7044882ef231201ed84e14b766d948d4c6b46f82 Mon Sep 17 00:00:00 2001 From: Jim Cromie Date: Wed, 29 Dec 2010 10:18:58 -0500 Subject: replace obsolete CONFIG_DYNAMIC_PRINTK_DEBUG with CONFIG_DYNAMIC_DEBUG MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit former is obsoleted by latter, done by       commit e9d376f0fa66bd630fe27403669c6ae6c22a868f       Author: Jason Baron       Date:   Thu Feb 5 11:51:38 2009 -0500 most defconfig mentions have been removed in the big defconfig cleanup, but the one in s6105_defconfig remains. Signed-off-by:  Jim Cromie Signed-off-by: Jiri Kosina --- arch/xtensa/configs/s6105_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/xtensa/configs/s6105_defconfig b/arch/xtensa/configs/s6105_defconfig index bb84fbc9921..5334f238f85 100644 --- a/arch/xtensa/configs/s6105_defconfig +++ b/arch/xtensa/configs/s6105_defconfig @@ -598,7 +598,7 @@ CONFIG_DEBUG_NOMMU_REGIONS=y # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set # -- cgit v1.2.3-18-g5258 From 42b16b3fbb5ee4555f5dee6220f3ccaa6e1ebe47 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Mon, 17 Jan 2011 00:09:38 +0100 Subject: Kill off warning: ‘inline’ is not at beginning of declaration MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix a bunch of warning: ‘inline’ is not at beginning of declaration messages when building a 'make allyesconfig' kernel with -Wextra. These warnings are trivial to kill, yet rather annoying when building with -Wextra. The more we can cut down on pointless crap like this the better (IMHO). A previous patch to do this for a 'allnoconfig' build has already been merged. This just takes the cleanup a little further. Signed-off-by: Jesper Juhl Signed-off-by: Jiri Kosina --- arch/x86/oprofile/op_model_p4.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/oprofile/op_model_p4.c b/arch/x86/oprofile/op_model_p4.c index 9fadec07414..98ab13058f8 100644 --- a/arch/x86/oprofile/op_model_p4.c +++ b/arch/x86/oprofile/op_model_p4.c @@ -50,7 +50,7 @@ static inline void setup_num_counters(void) #endif } -static int inline addr_increment(void) +static inline int addr_increment(void) { #ifdef CONFIG_SMP return smp_num_siblings == 2 ? 2 : 1; -- cgit v1.2.3-18-g5258 From 816ad741b6a168e1d0c182d10999c298fc281d17 Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Sat, 15 Jan 2011 13:40:12 -0600 Subject: ARM: i.MX53: Add full iomux support for mx53 This iomux file contains all the available pins that are iomux capable. Signed-off-by: Dinh Nguyen Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/board-mx53_evk.c | 36 +- arch/arm/plat-mxc/include/mach/iomux-mx53.h | 2636 ++++++++++++++++++++++++--- 2 files changed, 2361 insertions(+), 311 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c index caee04c0823..eba9df08119 100644 --- a/arch/arm/mach-mx5/board-mx53_evk.c +++ b/arch/arm/mach-mx5/board-mx53_evk.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved. * Copyright (C) 2010 Yong Shen. */ @@ -42,28 +42,28 @@ #include "devices-imx53.h" static iomux_v3_cfg_t mx53_evk_pads[] = { - MX53_PAD_CSI0_D10__UART1_TXD, - MX53_PAD_CSI0_D11__UART1_RXD, - MX53_PAD_ATA_DIOW__UART1_TXD, - MX53_PAD_ATA_DMACK__UART1_RXD, + MX53_PAD_CSI0_DAT10__UART1_TXD_MUX, + MX53_PAD_CSI0_DAT11__UART1_RXD_MUX, + MX53_PAD_PATA_DIOW__UART1_TXD_MUX, + MX53_PAD_PATA_DMACK__UART1_RXD_MUX, - MX53_PAD_ATA_BUFFER_EN__UART2_RXD, - MX53_PAD_ATA_DMARQ__UART2_TXD, - MX53_PAD_ATA_DIOR__UART2_RTS, - MX53_PAD_ATA_INTRQ__UART2_CTS, + MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX, + MX53_PAD_PATA_DMARQ__UART2_TXD_MUX, + MX53_PAD_PATA_DIOR__UART2_RTS, + MX53_PAD_PATA_INTRQ__UART2_CTS, - MX53_PAD_ATA_CS_0__UART3_TXD, - MX53_PAD_ATA_CS_1__UART3_RXD, - MX53_PAD_ATA_DA_1__UART3_CTS, - MX53_PAD_ATA_DA_2__UART3_RTS, + MX53_PAD_PATA_CS_0__UART3_TXD_MUX, + MX53_PAD_PATA_CS_1__UART3_RXD_MUX, + MX53_PAD_PATA_DA_1__UART3_CTS, + MX53_PAD_PATA_DA_2__UART3_RTS, - MX53_PAD_EIM_D16__CSPI1_SCLK, - MX53_PAD_EIM_D17__CSPI1_MISO, - MX53_PAD_EIM_D18__CSPI1_MOSI, + MX53_PAD_EIM_D16__ECSPI1_SCLK, + MX53_PAD_EIM_D17__ECSPI1_MISO, + MX53_PAD_EIM_D18__ECSPI1_MOSI, /* ecspi chip select lines */ - MX53_PAD_EIM_EB2__GPIO_2_30, - MX53_PAD_EIM_D19__GPIO_3_19, + MX53_PAD_EIM_EB2__GPIO2_30, + MX53_PAD_EIM_D19__GPIO3_19, }; static const struct imxuart_platform_data mx53_evk_uart_pdata __initconst = { diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx53.h b/arch/arm/plat-mxc/include/mach/iomux-mx53.h index 68e11d7ab79..bae7fd040cd 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx53.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx53.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -21,305 +21,2355 @@ #include -/* - * various IOMUX alternate output functions (1-7) - */ -typedef enum iomux_config { - IOMUX_CONFIG_ALT0, - IOMUX_CONFIG_ALT1, - IOMUX_CONFIG_ALT2, - IOMUX_CONFIG_ALT3, - IOMUX_CONFIG_ALT4, - IOMUX_CONFIG_ALT5, - IOMUX_CONFIG_ALT6, - IOMUX_CONFIG_ALT7, - IOMUX_CONFIG_GPIO, /* added to help user use GPIO mode */ -} iomux_pin_cfg_t; - /* These 2 defines are for pins that may not have a mux register, but could * have a pad setting register, and vice-versa. */ -#define NON_MUX_I 0x00 #define NON_PAD_I 0x00 #define MX53_UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST | PAD_CTL_HYS) -/* UART1 */ -#define MX53_PAD_CSI0_D10__UART1_TXD IOMUX_PAD(0x414, 0xE8, 2, 0x0, 0, MX53_UART_PAD_CTRL) -#define MX53_PAD_CSI0_D11__UART1_RXD IOMUX_PAD(0x418, 0xEC, 2, 0x878, 1, MX53_UART_PAD_CTRL) -#define MX53_PAD_ATA_DIOW__UART1_TXD IOMUX_PAD(0x5F0, 0x270, 3, 0x0, 0, MX53_UART_PAD_CTRL) -#define MX53_PAD_ATA_DMACK__UART1_RXD IOMUX_PAD(0x5F4, 0x274, 3, 0x880, 3, MX53_UART_PAD_CTRL) - -/* UART2 */ -#define MX53_PAD_ATA_BUFFER_EN__UART2_RXD IOMUX_PAD(0x5FC, 0x27C, 3, 0x880, 3, MX53_UART_PAD_CTRL) -#define MX53_PAD_ATA_DMARQ__UART2_TXD IOMUX_PAD(0x5F8, 0x278, 3, 0x0, 0, MX53_UART_PAD_CTRL) -#define MX53_PAD_ATA_DIOR__UART2_RTS IOMUX_PAD(0x604, 0x284, 3, 0x87C, 3, MX53_UART_PAD_CTRL) -#define MX53_PAD_ATA_INTRQ__UART2_CTS IOMUX_PAD(0x600, 0x280, 3, 0x0, 0, MX53_UART_PAD_CTRL) -/* UART3 */ -#define MX53_PAD_ATA_CS_0__UART3_TXD IOMUX_PAD(0x61C, 0x29C, 4, 0x0, 0, MX53_UART_PAD_CTRL) -#define MX53_PAD_ATA_CS_1__UART3_RXD IOMUX_PAD(0x620, 0x2A0, 4, 0x888, 3, MX53_UART_PAD_CTRL) -#define MX53_PAD_ATA_DA_1__UART3_CTS IOMUX_PAD(0x614, 0x294, 4, 0x0, 0, MX53_UART_PAD_CTRL) -#define MX53_PAD_ATA_DA_2__UART3_RTS IOMUX_PAD(0x618, 0x298, 4, 0x884, 5, MX53_UART_PAD_CTRL) +#define _MX53_PAD_GPIO_19__KPP_COL_5 IOMUX_PAD(0x348, 0x20, 0, 0x840, 0, 0) +#define _MX53_PAD_GPIO_19__GPIO4_5 IOMUX_PAD(0x348, 0x20, 1, 0x0, 0, 0) +#define _MX53_PAD_GPIO_19__CCM_CLKO IOMUX_PAD(0x348, 0x20, 2, 0x0, 0, 0) +#define _MX53_PAD_GPIO_19__SPDIF_OUT1 IOMUX_PAD(0x348, 0x20, 3, 0x0, 0, 0) +#define _MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2 IOMUX_PAD(0x348, 0x20, 4, 0x0, 0, 0) +#define _MX53_PAD_GPIO_19__ECSPI1_RDY IOMUX_PAD(0x348, 0x20, 5, 0x0, 0, 0) +#define _MX53_PAD_GPIO_19__FEC_TDATA_3 IOMUX_PAD(0x348, 0x20, 6, 0x0, 0, 0) +#define _MX53_PAD_GPIO_19__SRC_INT_BOOT IOMUX_PAD(0x348, 0x20,7, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL0__KPP_COL_0 IOMUX_PAD(0x34C, 0x24, o, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL0__GPIO4_6 IOMUX_PAD(0x34C, 0x24, 1, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC IOMUX_PAD(0x34C, 0x24, 2, 0x758, 0, 0) +#define _MX53_PAD_KEY_COL0__UART4_TXD_MUX IOMUX_PAD(0x34C, 0x24, 4, 0x890, 0, 0) +#define _MX53_PAD_KEY_COL0__ECSPI1_SCLK IOMUX_PAD(0x34C, 0x24, 5, 0x79C, 0, 0) +#define _MX53_PAD_KEY_COL0__FEC_RDATA_3 IOMUX_PAD(0x34C, 0x24, 6, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL0__SRC_ANY_PU_RST IOMUX_PAD(0x34C, 0x24, 7, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW0__KPP_ROW_0 IOMUX_PAD(0x350, 0x28, 0, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW0__GPIO4_7 IOMUX_PAD(0x350, 0x28, 1, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD IOMUX_PAD(0x350, 0x28, 2, 0x74C, 0, 0) +#define _MX53_PAD_KEY_ROW0__UART4_RXD_MUX IOMUX_PAD(0x350, 0x28, 4, 0x890, 1, 0) +#define _MX53_PAD_KEY_ROW0__ECSPI1_MOSI IOMUX_PAD(0x350, 0x28, 5, 0x7A4, 0, 0) +#define _MX53_PAD_KEY_ROW0__FEC_TX_ER IOMUX_PAD(0x350, 0x28, 6, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL1__KPP_COL_1 IOMUX_PAD(0x354, 0x2C, 0, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL1__GPIO4_8 IOMUX_PAD(0x354, 0x2C, 1, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS IOMUX_PAD(0x354, 0x2C, 2, 0x75C, 0, 0) +#define _MX53_PAD_KEY_COL1__UART5_TXD_MUX IOMUX_PAD(0x354, 0x2C, 4, 0x898, 0, 0) +#define _MX53_PAD_KEY_COL1__ECSPI1_MISO IOMUX_PAD(0x354, 0x2C, 5, 0x7A0, 0, 0) +#define _MX53_PAD_KEY_COL1__FEC_RX_CLK IOMUX_PAD(0x354, 0x2C, 6, 0x808, 0, 0) +#define _MX53_PAD_KEY_COL1__USBPHY1_TXREADY IOMUX_PAD(0x354, 0x2C, 7, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW1__KPP_ROW_1 IOMUX_PAD(0x358, 0x30, 0, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW1__GPIO4_9 IOMUX_PAD(0x358, 0x30, 1, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD IOMUX_PAD(0x358, 0x30, 2, 0x748, 0, 0) +#define _MX53_PAD_KEY_ROW1__UART5_RXD_MUX IOMUX_PAD(0x358, 0x30, 4, 0x898, 1, 0) +#define _MX53_PAD_KEY_ROW1__ECSPI1_SS0 IOMUX_PAD(0x358, 0x30, 5, 0x7A8, 0, 0) +#define _MX53_PAD_KEY_ROW1__FEC_COL IOMUX_PAD(0x358, 0x30, 6, 0x800, 0, 0) +#define _MX53_PAD_KEY_ROW1__USBPHY1_RXVALID IOMUX_PAD(0x358, 0x30, 7, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL2__KPP_COL_2 IOMUX_PAD(0x35C, 0x34, 0, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL2__GPIO4_10 IOMUX_PAD(0x35C, 0x34, 1, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL2__CAN1_TXCAN IOMUX_PAD(0x35C, 0x34, 2, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL2__FEC_MDIO IOMUX_PAD(0x35C, 0x34, 4, 0x804, 0, 0) +#define _MX53_PAD_KEY_COL2__ECSPI1_SS1 IOMUX_PAD(0x35C, 0x34, 5, 0x7AC, 0, 0) +#define _MX53_PAD_KEY_COL2__FEC_RDATA_2 IOMUX_PAD(0x35C, 0x34, 6, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE IOMUX_PAD(0x35C, 0x34, 7, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW2__KPP_ROW_2 IOMUX_PAD(0x360, 0x38, 0, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW2__GPIO4_11 IOMUX_PAD(0x360, 0x38, 1, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW2__CAN1_RXCAN IOMUX_PAD(0x360, 0x38, 2, 0x760, 0, 0) +#define _MX53_PAD_KEY_ROW2__FEC_MDC IOMUX_PAD(0x360, 0x38, 4, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW2__ECSPI1_SS2 IOMUX_PAD(0x360, 0x38, 5, 0x7B0, 0, 0) +#define _MX53_PAD_KEY_ROW2__FEC_TDATA_2 IOMUX_PAD(0x360, 0x38, 6, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW2__USBPHY1_RXERROR IOMUX_PAD(0x360, 0x38, 7, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL3__KPP_COL_3 IOMUX_PAD(0x364, 0x3C, 0, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL3__GPIO4_12 IOMUX_PAD(0x364, 0x3C, 1, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL3__USBOH3_H2_DP IOMUX_PAD(0x364, 0x3C, 2, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL3__SPDIF_IN1 IOMUX_PAD(0x364, 0x3C, 3, 0x870, 0, 0) +#define _MX53_PAD_KEY_COL3__I2C2_SCL IOMUX_PAD(0x364, 0x3C, 4 | IOMUX_CONFIG_SION, 0x81C, 0, 0) +#define _MX53_PAD_KEY_COL3__ECSPI1_SS3 IOMUX_PAD(0x364, 0x3C, 5, 0x7B4, 0, 0) +#define _MX53_PAD_KEY_COL3__FEC_CRS IOMUX_PAD(0x364, 0x3C, 6, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK IOMUX_PAD(0x364, 0x3C, 7, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW3__KPP_ROW_3 IOMUX_PAD(0x368, 0x40, 0, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW3__GPIO4_13 IOMUX_PAD(0x368, 0x40, 1, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW3__USBOH3_H2_DM IOMUX_PAD(0x368, 0x40, 2, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK IOMUX_PAD(0x368, 0x40, 3, 0x768, 0, 0) +#define _MX53_PAD_KEY_ROW3__I2C2_SDA IOMUX_PAD(0x368, 0x40, 4 | IOMUX_CONFIG_SION, 0x820, 0, 0) +#define _MX53_PAD_KEY_ROW3__OSC32K_32K_OUT IOMUX_PAD(0x368, 0x40, 5, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW3__CCM_PLL4_BYP IOMUX_PAD(0x368, 0x40, 6, 0x77C, 0, 0) +#define _MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 IOMUX_PAD(0x368, 0x40, 7, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL4__KPP_COL_4 IOMUX_PAD(0x36C, 0x44, 0, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL4__GPIO4_14 IOMUX_PAD(0x36C, 0x44, 1, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL4__CAN2_TXCAN IOMUX_PAD(0x36C, 0x44, 2, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL4__IPU_SISG_4 IOMUX_PAD(0x36C, 0x44, 3, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL4__UART5_RTS IOMUX_PAD(0x36C, 0x44, 4, 0x894, 0, 0) +#define _MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC IOMUX_PAD(0x36C, 0x44, 5, 0x89C, 0, 0) +#define _MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1 IOMUX_PAD(0x36C, 0x44, 7, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW4__KPP_ROW_4 IOMUX_PAD(0x370, 0x48, 0, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW4__GPIO4_15 IOMUX_PAD(0x370, 0x48, 1, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW4__CAN2_RXCAN IOMUX_PAD(0x370, 0x48, 2, 0x764, 0, 0) +#define _MX53_PAD_KEY_ROW4__IPU_SISG_5 IOMUX_PAD(0x370, 0x48, 3, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW4__UART5_CTS IOMUX_PAD(0x370, 0x48, 4, 0x894, 1, 0) +#define _MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR IOMUX_PAD(0x370, 0x48, 5, 0x0, 0, 0) +#define _MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID IOMUX_PAD(0x370, 0x48, 7, 0x0, 0, 0) +#define _MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK IOMUX_PAD(0x378, 0x4C, 0, 0x0, 0, 0) +#define _MX53_PAD_DI0_DISP_CLK__GPIO4_16 IOMUX_PAD(0x378, 0x4C, 1, 0x0, 0, 0) +#define _MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR IOMUX_PAD(0x378, 0x4C, 2, 0x0, 0, 0) +#define _MX53_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0 IOMUX_PAD(0x378, 0x4C, 5, 0x0, 0, 0) +#define _MX53_PAD_DI0_DISP_CLK__EMI_EMI_DEBUG_0 IOMUX_PAD(0x378, 0x4C, 6, 0x0, 0, 0) +#define _MX53_PAD_DI0_DISP_CLK__USBPHY1_AVALID IOMUX_PAD(0x378, 0x4C, 7, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 IOMUX_PAD(0x37C, 0x50, 0, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN15__GPIO4_17 IOMUX_PAD(0x37C, 0x50, 1, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC IOMUX_PAD(0x37C, 0x50, 2, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1 IOMUX_PAD(0x37C, 0x50, 5, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN15__EMI_EMI_DEBUG_1 IOMUX_PAD(0x37C, 0x50, 6, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN15__USBPHY1_BVALID IOMUX_PAD(0x37C, 0x50, 7, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 IOMUX_PAD(0x380, 0x54, 0, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN2__GPIO4_18 IOMUX_PAD(0x380, 0x54, 1, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD IOMUX_PAD(0x380, 0x54, 2, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2 IOMUX_PAD(0x380, 0x54, 5, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN2__EMI_EMI_DEBUG_2 IOMUX_PAD(0x380, 0x54, 6, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN2__USBPHY1_ENDSESSION IOMUX_PAD(0x380, 0x54, 7, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 IOMUX_PAD(0x384, 0x58, 0, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN3__GPIO4_19 IOMUX_PAD(0x384, 0x58, 1, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS IOMUX_PAD(0x384, 0x58, 2, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3 IOMUX_PAD(0x384, 0x58, 5, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN3__EMI_EMI_DEBUG_3 IOMUX_PAD(0x384, 0x58, 6, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN3__USBPHY1_IDDIG IOMUX_PAD(0x384, 0x58, 7, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN4__IPU_DI0_PIN4 IOMUX_PAD(0x388, 0x5C, 0, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN4__GPIO4_20 IOMUX_PAD(0x388, 0x5C, 1, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD IOMUX_PAD(0x388, 0x5C, 2, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN4__ESDHC1_WP IOMUX_PAD(0x388, 0x5C, 3, 0x7FC, 0, 0) +#define _MX53_PAD_DI0_PIN4__SDMA_DEBUG_YIELD IOMUX_PAD(0x388, 0x5C, 5, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN4__EMI_EMI_DEBUG_4 IOMUX_PAD(0x388, 0x5C, 6, 0x0, 0, 0) +#define _MX53_PAD_DI0_PIN4__USBPHY1_HOSTDISCONNECT IOMUX_PAD(0x388, 0x5C, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 IOMUX_PAD(0x38C, 0x60, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT0__GPIO4_21 IOMUX_PAD(0x38C, 0x60, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT0__CSPI_SCLK IOMUX_PAD(0x38C, 0x60, 2, 0x780, 0, 0) +#define _MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0 IOMUX_PAD(0x38C, 0x60, 3, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN IOMUX_PAD(0x38C, 0x60, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT0__EMI_EMI_DEBUG_5 IOMUX_PAD(0x38C, 0x60, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT0__USBPHY2_TXREADY IOMUX_PAD(0x38C, 0x60, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 IOMUX_PAD(0x390, 0x64, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT1__GPIO4_22 IOMUX_PAD(0x390, 0x64, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT1__CSPI_MOSI IOMUX_PAD(0x390, 0x64, 2, 0x788, 0, 0) +#define _MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1 IOMUX_PAD(0x390, 0x64, 3, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL IOMUX_PAD(0x390, 0x64, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT1__EMI_EMI_DEBUG_6 IOMUX_PAD(0x390, 0x64, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT1__USBPHY2_RXVALID IOMUX_PAD(0x390, 0x64, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 IOMUX_PAD(0x394, 0x68, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT2__GPIO4_23 IOMUX_PAD(0x394, 0x68, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT2__CSPI_MISO IOMUX_PAD(0x394, 0x68, 2, 0x784, 0, 0) +#define _MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2 IOMUX_PAD(0x394, 0x68, 3, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT2__SDMA_DEBUG_MODE IOMUX_PAD(0x394, 0x68, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT2__EMI_EMI_DEBUG_7 IOMUX_PAD(0x394, 0x68, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT2__USBPHY2_RXACTIVE IOMUX_PAD(0x394, 0x68, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 IOMUX_PAD(0x398, 0x6C, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT3__GPIO4_24 IOMUX_PAD(0x398, 0x6C, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT3__CSPI_SS0 IOMUX_PAD(0x398, 0x6C, 2, 0x78C, 0, 0) +#define _MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3 IOMUX_PAD(0x398, 0x6C, 3, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR IOMUX_PAD(0x398, 0x6C, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT3__EMI_EMI_DEBUG_8 IOMUX_PAD(0x398, 0x6C, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT3__USBPHY2_RXERROR IOMUX_PAD(0x398, 0x6C, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 IOMUX_PAD(0x39C, 0x70, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT4__GPIO4_25 IOMUX_PAD(0x39C, 0x70, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT4__CSPI_SS1 IOMUX_PAD(0x39C, 0x70, 2, 0x790, 0, 0) +#define _MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4 IOMUX_PAD(0x39C, 0x70, 3, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB IOMUX_PAD(0x39C, 0x70, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT4__EMI_EMI_DEBUG_9 IOMUX_PAD(0x39C, 0x70, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT4__USBPHY2_SIECLOCK IOMUX_PAD(0x39C, 0x70, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 IOMUX_PAD(0x3A0, 0x74, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT5__GPIO4_26 IOMUX_PAD(0x3A0, 0x74, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT5__CSPI_SS2 IOMUX_PAD(0x3A0, 0x74, 2, 0x794, 0, 0) +#define _MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5 IOMUX_PAD(0x3A0, 0x74, 3, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS IOMUX_PAD(0x3A0, 0x74, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT5__EMI_EMI_DEBUG_10 IOMUX_PAD(0x3A0, 0x74, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT5__USBPHY2_LINESTATE_0 IOMUX_PAD(0x3A0, 0x74, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 IOMUX_PAD(0x3A4, 0x78, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT6__GPIO4_27 IOMUX_PAD(0x3A4, 0x78, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT6__CSPI_SS3 IOMUX_PAD(0x3A4, 0x78, 2, 0x798, 0, 0) +#define _MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6 IOMUX_PAD(0x3A4, 0x78, 3, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE IOMUX_PAD(0x3A4, 0x78, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT6__EMI_EMI_DEBUG_11 IOMUX_PAD(0x3A4, 0x78, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT6__USBPHY2_LINESTATE_1 IOMUX_PAD(0x3A4, 0x78, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 IOMUX_PAD(0x3A8, 0x7C, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT7__GPIO4_28 IOMUX_PAD(0x3A8, 0x7C, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT7__CSPI_RDY IOMUX_PAD(0x3A8, 0x7C, 2, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7 IOMUX_PAD(0x3A8, 0x7C, 3, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0 IOMUX_PAD(0x3A8, 0x7C, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT7__EMI_EMI_DEBUG_12 IOMUX_PAD(0x3A8, 0x7C, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT7__USBPHY2_VBUSVALID IOMUX_PAD(0x3A8, 0x7C, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 IOMUX_PAD(0x3AC, 0x80, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT8__GPIO4_29 IOMUX_PAD(0x3AC, 0x80, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT8__PWM1_PWMO IOMUX_PAD(0x3AC, 0x80, 2, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT8__WDOG1_WDOG_B IOMUX_PAD(0x3AC, 0x80, 3, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1 IOMUX_PAD(0x3AC, 0x80, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT8__EMI_EMI_DEBUG_13 IOMUX_PAD(0x3AC, 0x80, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT8__USBPHY2_AVALID IOMUX_PAD(0x3AC, 0x80, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 IOMUX_PAD(0x3B0, 0x84, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT9__GPIO4_30 IOMUX_PAD(0x3B0, 0x84, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT9__PWM2_PWMO IOMUX_PAD(0x3B0, 0x84, 2, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT9__WDOG2_WDOG_B IOMUX_PAD(0x3B0, 0x84, 3, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2 IOMUX_PAD(0x3B0, 0x84, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT9__EMI_EMI_DEBUG_14 IOMUX_PAD(0x3B0, 0x84, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT9__USBPHY2_VSTATUS_0 IOMUX_PAD(0x3B0, 0x84, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 IOMUX_PAD(0x3B4, 0x88, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT10__GPIO4_31 IOMUX_PAD(0x3B4, 0x88, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP IOMUX_PAD(0x3B4, 0x88, 2, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3 IOMUX_PAD(0x3B4, 0x88, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT10__EMI_EMI_DEBUG_15 IOMUX_PAD(0x3B4, 0x88, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT10__USBPHY2_VSTATUS_1 IOMUX_PAD(0x3B4, 0x88, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 IOMUX_PAD(0x3B8, 0x8C, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT11__GPIO5_5 IOMUX_PAD(0x3B8, 0x8C, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT IOMUX_PAD(0x3B8, 0x8C, 2, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4 IOMUX_PAD(0x3B8, 0x8C, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT11__EMI_EMI_DEBUG_16 IOMUX_PAD(0x3B8, 0x8C, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT11__USBPHY2_VSTATUS_2 IOMUX_PAD(0x3B8, 0x8C, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 IOMUX_PAD(0x3BC, 0x90, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT12__GPIO5_6 IOMUX_PAD(0x3BC, 0x90, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK IOMUX_PAD(0x3BC, 0x90, 2, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5 IOMUX_PAD(0x3BC, 0x90, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT12__EMI_EMI_DEBUG_17 IOMUX_PAD(0x3BC, 0x90, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT12__USBPHY2_VSTATUS_3 IOMUX_PAD(0x3BC, 0x90, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 IOMUX_PAD(0x3C0, 0x94, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT13__GPIO5_7 IOMUX_PAD(0x3C0, 0x94, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS IOMUX_PAD(0x3C0, 0x94, 3, 0x754, 0, 0) +#define _MX53_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0 IOMUX_PAD(0x3C0, 0x94, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT13__EMI_EMI_DEBUG_18 IOMUX_PAD(0x3C0, 0x94, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT13__USBPHY2_VSTATUS_4 IOMUX_PAD(0x3C0, 0x94, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 IOMUX_PAD(0x3C4, 0x98, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT14__GPIO5_8 IOMUX_PAD(0x3C4, 0x98, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC IOMUX_PAD(0x3C4, 0x98, 3, 0x750, 0, 0) +#define _MX53_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1 IOMUX_PAD(0x3C4, 0x98, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT14__EMI_EMI_DEBUG_19 IOMUX_PAD(0x3C4, 0x98, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT14__USBPHY2_VSTATUS_5 IOMUX_PAD(0x3C4, 0x98, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 IOMUX_PAD(0x3C8, 0x9C, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT15__GPIO5_9 IOMUX_PAD(0x3C8, 0x9C, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT15__ECSPI1_SS1 IOMUX_PAD(0x3C8, 0x9C, 2, 0x7AC, 1, 0) +#define _MX53_PAD_DISP0_DAT15__ECSPI2_SS1 IOMUX_PAD(0x3C8, 0x9C, 3, 0x7C8, 0, 0) +#define _MX53_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2 IOMUX_PAD(0x3C8, 0x9C, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT15__EMI_EMI_DEBUG_20 IOMUX_PAD(0x3C8, 0x9C, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT15__USBPHY2_VSTATUS_6 IOMUX_PAD(0x3C8, 0x9C, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 IOMUX_PAD(0x3CC, 0xA0, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT16__GPIO5_10 IOMUX_PAD(0x3CC, 0xA0, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT16__ECSPI2_MOSI IOMUX_PAD(0x3CC, 0xA0, 2, 0x7C0, 0, 0) +#define _MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC IOMUX_PAD(0x3CC, 0xA0, 3, 0x758, 1, 0) +#define _MX53_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0 IOMUX_PAD(0x3CC, 0xA0, 4, 0x868, 0, 0) +#define _MX53_PAD_DISP0_DAT16__SDMA_DEBUG_EVT_CHN_LINES_3 IOMUX_PAD(0x3CC, 0xA0, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT16__EMI_EMI_DEBUG_21 IOMUX_PAD(0x3CC, 0xA0, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT16__USBPHY2_VSTATUS_7 IOMUX_PAD(0x3CC, 0xA0, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 IOMUX_PAD(0x3D0, 0xA4, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT17__GPIO5_11 IOMUX_PAD(0x3D0, 0xA4, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT17__ECSPI2_MISO IOMUX_PAD(0x3D0, 0xA4, 2, 0x7BC, 0, 0) +#define _MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD IOMUX_PAD(0x3D0, 0xA4, 3, 0x74C, 1, 0) +#define _MX53_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1 IOMUX_PAD(0x3D0, 0xA4, 4, 0x86C, 0, 0) +#define _MX53_PAD_DISP0_DAT17__SDMA_DEBUG_EVT_CHN_LINES_4 IOMUX_PAD(0x3D0, 0xA4, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT17__EMI_EMI_DEBUG_22 IOMUX_PAD(0x3D0, 0xA4, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 IOMUX_PAD(0x3D4, 0xA8, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT18__GPIO5_12 IOMUX_PAD(0x3D4, 0xA8, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT18__ECSPI2_SS0 IOMUX_PAD(0x3D4, 0xA8, 2, 0x7C4, 0, 0) +#define _MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS IOMUX_PAD(0x3D4, 0xA8, 3, 0x75C, 1, 0) +#define _MX53_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS IOMUX_PAD(0x3D4, 0xA8, 4, 0x73C, 0, 0) +#define _MX53_PAD_DISP0_DAT18__SDMA_DEBUG_EVT_CHN_LINES_5 IOMUX_PAD(0x3D4, 0xA8, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT18__EMI_EMI_DEBUG_23 IOMUX_PAD(0x3D4, 0xA8, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT18__EMI_WEIM_CS_2 IOMUX_PAD(0x3D4, 0xA8, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 IOMUX_PAD(0x3D8, 0xAC, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT19__GPIO5_13 IOMUX_PAD(0x3D8, 0xAC, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT19__ECSPI2_SCLK IOMUX_PAD(0x3D8, 0xAC, 2, 0x7B8, 0, 0) +#define _MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD IOMUX_PAD(0x3D8, 0xAC, 3, 0x748, 1, 0) +#define _MX53_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC IOMUX_PAD(0x3D8, 0xAC, 4, 0x738, 0, 0) +#define _MX53_PAD_DISP0_DAT19__SDMA_DEBUG_EVT_CHN_LINES_6 IOMUX_PAD(0x3D8, 0xAC, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT19__EMI_EMI_DEBUG_24 IOMUX_PAD(0x3D8, 0xAC, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT19__EMI_WEIM_CS_3 IOMUX_PAD(0x3D8, 0xAC, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 IOMUX_PAD(0x3DC, 0xB0, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT20__GPIO5_14 IOMUX_PAD(0x3DC, 0xB0, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT20__ECSPI1_SCLK IOMUX_PAD(0x3DC, 0xB0, 2, 0x79C, 1, 0) +#define _MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC IOMUX_PAD(0x3DC, 0xB0, 3, 0x740, 0, 0) +#define _MX53_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7 IOMUX_PAD(0x3DC, 0xB0, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT20__EMI_EMI_DEBUG_25 IOMUX_PAD(0x3DC, 0xB0, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT20__SATA_PHY_TDI IOMUX_PAD(0x3DC, 0xB0, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 IOMUX_PAD(0x3E0, 0xB4, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT21__GPIO5_15 IOMUX_PAD(0x3E0, 0xB4, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT21__ECSPI1_MOSI IOMUX_PAD(0x3E0, 0xB4, 2, 0x7A4, 1, 0) +#define _MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD IOMUX_PAD(0x3E0, 0xB4, 3, 0x734, 0, 0) +#define _MX53_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0 IOMUX_PAD(0x3E0, 0xB4, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT21__EMI_EMI_DEBUG_26 IOMUX_PAD(0x3E0, 0xB4, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT21__SATA_PHY_TDO IOMUX_PAD(0x3E0, 0xB4, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 IOMUX_PAD(0x3E4, 0xB8, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT22__GPIO5_16 IOMUX_PAD(0x3E4, 0xB8, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT22__ECSPI1_MISO IOMUX_PAD(0x3E4, 0xB8, 2, 0x7A0, 1, 0) +#define _MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS IOMUX_PAD(0x3E4, 0xB8, 3, 0x744, 0, 0) +#define _MX53_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1 IOMUX_PAD(0x3E4, 0xB8, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT22__EMI_EMI_DEBUG_27 IOMUX_PAD(0x3E4, 0xB8, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT22__SATA_PHY_TCK IOMUX_PAD(0x3E4, 0xB8, 7, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 IOMUX_PAD(0x3E8, 0xBC, 0, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT23__GPIO5_17 IOMUX_PAD(0x3E8, 0xBC, 1, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT23__ECSPI1_SS0 IOMUX_PAD(0x3E8, 0xBC, 2, 0x7A8, 1, 0) +#define _MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD IOMUX_PAD(0x3E8, 0xBC, 3, 0x730, 0, 0) +#define _MX53_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2 IOMUX_PAD(0x3E8, 0xBC, 5, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT23__EMI_EMI_DEBUG_28 IOMUX_PAD(0x3E8, 0xBC, 6, 0x0, 0, 0) +#define _MX53_PAD_DISP0_DAT23__SATA_PHY_TMS IOMUX_PAD(0x3E8, 0xBC, 7, 0x0, 0, 0) +#define _MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK IOMUX_PAD(0x3EC, 0xC0, 0, 0x0, 0, 0) +#define _MX53_PAD_CSI0_PIXCLK__GPIO5_18 IOMUX_PAD(0x3EC, 0xC0, 1, 0x0, 0, 0) +#define _MX53_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0 IOMUX_PAD(0x3EC, 0xC0, 5, 0x0, 0, 0) +#define _MX53_PAD_CSI0_PIXCLK__EMI_EMI_DEBUG_29 IOMUX_PAD(0x3EC, 0xC0, 6, 0x0, 0, 0) +#define _MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC IOMUX_PAD(0x3F0, 0xC4, 0, 0x0, 0, 0) +#define _MX53_PAD_CSI0_MCLK__GPIO5_19 IOMUX_PAD(0x3F0, 0xC4, 1, 0x0, 0, 0) +#define _MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK IOMUX_PAD(0x3F0, 0xC4, 2, 0x0, 0, 0) +#define _MX53_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1 IOMUX_PAD(0x3F0, 0xC4, 5, 0x0, 0, 0) +#define _MX53_PAD_CSI0_MCLK__EMI_EMI_DEBUG_30 IOMUX_PAD(0x3F0, 0xC4, 6, 0x0, 0, 0) +#define _MX53_PAD_CSI0_MCLK__TPIU_TRCTL IOMUX_PAD(0x3F0, 0xC4, 7, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN IOMUX_PAD(0x3F4, 0xC8, 0, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DATA_EN__GPIO5_20 IOMUX_PAD(0x3F4, 0xC8, 1, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2 IOMUX_PAD(0x3F4, 0xC8, 5, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DATA_EN__EMI_EMI_DEBUG_31 IOMUX_PAD(0x3F4, 0xC8, 6, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DATA_EN__TPIU_TRCLK IOMUX_PAD(0x3F4, 0xC8, 7, 0x0, 0, 0) +#define _MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC IOMUX_PAD(0x3F8, 0xCC, 0, 0x0, 0, 0) +#define _MX53_PAD_CSI0_VSYNC__GPIO5_21 IOMUX_PAD(0x3F8, 0xCC, 1, 0x0, 0, 0) +#define _MX53_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3 IOMUX_PAD(0x3F8, 0xCC, 5, 0x0, 0, 0) +#define _MX53_PAD_CSI0_VSYNC__EMI_EMI_DEBUG_32 IOMUX_PAD(0x3F8, 0xCC, 6, 0x0, 0, 0) +#define _MX53_PAD_CSI0_VSYNC__TPIU_TRACE_0 IOMUX_PAD(0x3F8, 0xCC, 7, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4 IOMUX_PAD(0x3FC, 0xD0, 0, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT4__GPIO5_22 IOMUX_PAD(0x3FC, 0xD0, 1, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT4__KPP_COL_5 IOMUX_PAD(0x3FC, 0xD0, 2, 0x840, 1, 0) +#define _MX53_PAD_CSI0_DAT4__ECSPI1_SCLK IOMUX_PAD(0x3FC, 0xD0, 3, 0x79C, 2, 0) +#define _MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP IOMUX_PAD(0x3FC, 0xD0, 4, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC IOMUX_PAD(0x3FC, 0xD0, 5, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT4__EMI_EMI_DEBUG_33 IOMUX_PAD(0x3FC, 0xD0, 6, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT4__TPIU_TRACE_1 IOMUX_PAD(0x3FC, 0xD0, 7, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5 IOMUX_PAD(0x400, 0xD4, 0, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT5__GPIO5_23 IOMUX_PAD(0x400, 0xD4, 1, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT5__KPP_ROW_5 IOMUX_PAD(0x400, 0xD4, 2, 0x84C, 0, 0) +#define _MX53_PAD_CSI0_DAT5__ECSPI1_MOSI IOMUX_PAD(0x400, 0xD4, 3, 0x7A4, 2, 0) +#define _MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT IOMUX_PAD(0x400, 0xD4, 4, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD IOMUX_PAD(0x400, 0xD4, 5, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT5__EMI_EMI_DEBUG_34 IOMUX_PAD(0x400, 0xD4, 6, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT5__TPIU_TRACE_2 IOMUX_PAD(0x400, 0xD4, 7, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6 IOMUX_PAD(0x404, 0xD8, 0, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT6__GPIO5_24 IOMUX_PAD(0x404, 0xD8, 1, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT6__KPP_COL_6 IOMUX_PAD(0x404, 0xD8, 2, 0x844, 0, 0) +#define _MX53_PAD_CSI0_DAT6__ECSPI1_MISO IOMUX_PAD(0x404, 0xD8, 3, 0x7A0, 2, 0) +#define _MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK IOMUX_PAD(0x404, 0xD8, 4, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS IOMUX_PAD(0x404, 0xD8, 5, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT6__EMI_EMI_DEBUG_35 IOMUX_PAD(0x404, 0xD8, 6, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT6__TPIU_TRACE_3 IOMUX_PAD(0x404, 0xD8, 7, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7 IOMUX_PAD(0x408, 0xDC, 0, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT7__GPIO5_25 IOMUX_PAD(0x408, 0xDC, 1, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT7__KPP_ROW_6 IOMUX_PAD(0x408, 0xDC, 2, 0x850, 0, 0) +#define _MX53_PAD_CSI0_DAT7__ECSPI1_SS0 IOMUX_PAD(0x408, 0xDC, 3, 0x7A8, 2, 0) +#define _MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR IOMUX_PAD(0x408, 0xDC, 4, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD IOMUX_PAD(0x408, 0xDC, 5, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT7__EMI_EMI_DEBUG_36 IOMUX_PAD(0x408, 0xDC, 6, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT7__TPIU_TRACE_4 IOMUX_PAD(0x408, 0xDC, 7, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8 IOMUX_PAD(0x40C, 0xE0, 0, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT8__GPIO5_26 IOMUX_PAD(0x40C, 0xE0, 1, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT8__KPP_COL_7 IOMUX_PAD(0x40C, 0xE0, 2, 0x848, 0, 0) +#define _MX53_PAD_CSI0_DAT8__ECSPI2_SCLK IOMUX_PAD(0x40C, 0xE0, 3, 0x7B8, 1, 0) +#define _MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC IOMUX_PAD(0x40C, 0xE0, 4, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT8__I2C1_SDA IOMUX_PAD(0x40C, 0xE0, 5 | IOMUX_CONFIG_SION, 0x818, 0, 0) +#define _MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 IOMUX_PAD(0x40C, 0xE0, 6, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 IOMUX_PAD(0x40C, 0xE0, 7, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 IOMUX_PAD(0x410, 0xE4, 0, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT9__GPIO5_27 IOMUX_PAD(0x410, 0xE4, 1, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT9__KPP_ROW_7 IOMUX_PAD(0x410, 0xE4, 2, 0x854, 0, 0) +#define _MX53_PAD_CSI0_DAT9__ECSPI2_MOSI IOMUX_PAD(0x410, 0xE4, 3, 0x7C0, 1, 0) +#define _MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR IOMUX_PAD(0x410, 0xE4, 4, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT9__I2C1_SCL IOMUX_PAD(0x410, 0xE4, 5 | IOMUX_CONFIG_SION, 0x814, 0, 0) +#define _MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 IOMUX_PAD(0x410, 0xE4, 6, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 IOMUX_PAD(0x410, 0xE4, 7, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 IOMUX_PAD(0x414, 0xE8, 0, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT10__GPIO5_28 IOMUX_PAD(0x414, 0xE8, 1, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT10__UART1_TXD_MUX IOMUX_PAD(0x414, 0xE8, 2, 0x878, 0, 0) +#define _MX53_PAD_CSI0_DAT10__ECSPI2_MISO IOMUX_PAD(0x414, 0xE8, 3, 0x7BC, 1, 0) +#define _MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC IOMUX_PAD(0x414, 0xE8, 4, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4 IOMUX_PAD(0x414, 0xE8, 5, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT10__EMI_EMI_DEBUG_39 IOMUX_PAD(0x414, 0xE8, 6, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT10__TPIU_TRACE_7 IOMUX_PAD(0x414, 0xE8, 7, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11 IOMUX_PAD(0x418, 0xEC, 0, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT11__GPIO5_29 IOMUX_PAD(0x418, 0xEC, 1, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT11__UART1_RXD_MUX IOMUX_PAD(0x418, 0xEC, 2, 0x878, 1, 0) +#define _MX53_PAD_CSI0_DAT11__ECSPI2_SS0 IOMUX_PAD(0x418, 0xEC, 3, 0x7C4, 1, 0) +#define _MX53_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS IOMUX_PAD(0x418, 0xEC, 4, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5 IOMUX_PAD(0x418, 0xEC, 5, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT11__EMI_EMI_DEBUG_40 IOMUX_PAD(0x418, 0xEC, 6, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT11__TPIU_TRACE_8 IOMUX_PAD(0x418, 0xEC, 7, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 IOMUX_PAD(0x41C, 0xF0, 0, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT12__GPIO5_30 IOMUX_PAD(0x41C, 0xF0, 1, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT12__UART4_TXD_MUX IOMUX_PAD(0x41C, 0xF0, 2, 0x890, 2, 0) +#define _MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 IOMUX_PAD(0x41C, 0xF0, 4, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 IOMUX_PAD(0x41C, 0xF0, 5, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41 IOMUX_PAD(0x41C, 0xF0, 6, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT12__TPIU_TRACE_9 IOMUX_PAD(0x41C, 0xF0, 7, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 IOMUX_PAD(0x420, 0xF4, 0, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT13__GPIO5_31 IOMUX_PAD(0x420, 0xF4, 1, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT13__UART4_RXD_MUX IOMUX_PAD(0x420, 0xF4, 2, 0x890, 3, 0) +#define _MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 IOMUX_PAD(0x420, 0xF4, 4, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 IOMUX_PAD(0x420, 0xF4, 5, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42 IOMUX_PAD(0x420, 0xF4, 6, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT13__TPIU_TRACE_10 IOMUX_PAD(0x420, 0xF4, 7, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 IOMUX_PAD(0x424, 0xF8, 0, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT14__GPIO6_0 IOMUX_PAD(0x424, 0xF8, 1, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT14__UART5_TXD_MUX IOMUX_PAD(0x424, 0xF8, 2, 0x898, 2, 0) +#define _MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 IOMUX_PAD(0x424, 0xF8, 4, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 IOMUX_PAD(0x424, 0xF8, 5, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43 IOMUX_PAD(0x424, 0xF8, 6, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT14__TPIU_TRACE_11 IOMUX_PAD(0x424, 0xF8, 7, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 IOMUX_PAD(0x428, 0xFC, 0, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT15__GPIO6_1 IOMUX_PAD(0x428, 0xFC, 1, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT15__UART5_RXD_MUX IOMUX_PAD(0x428, 0xFC, 2, 0x898, 3, 0) +#define _MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 IOMUX_PAD(0x428, 0xFC, 4, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 IOMUX_PAD(0x428, 0xFC, 5, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44 IOMUX_PAD(0x428, 0xFC, 6, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT15__TPIU_TRACE_12 IOMUX_PAD(0x428, 0xFC, 7, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 IOMUX_PAD(0x42C, 0x100, 0, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT16__GPIO6_2 IOMUX_PAD(0x42C, 0x100, 1, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT16__UART4_RTS IOMUX_PAD(0x42C, 0x100, 2, 0x88C, 0, 0) +#define _MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 IOMUX_PAD(0x42C, 0x100, 4, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 IOMUX_PAD(0x42C, 0x100, 5, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45 IOMUX_PAD(0x42C, 0x100, 6, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT16__TPIU_TRACE_13 IOMUX_PAD(0x42C, 0x100, 7, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 IOMUX_PAD(0x430, 0x104, 0, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT17__GPIO6_3 IOMUX_PAD(0x430, 0x104, 1, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT17__UART4_CTS IOMUX_PAD(0x430, 0x104, 2, 0x88C, 1, 0) +#define _MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 IOMUX_PAD(0x430, 0x104, 4, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 IOMUX_PAD(0x430, 0x104, 5, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46 IOMUX_PAD(0x430, 0x104, 6, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT17__TPIU_TRACE_14 IOMUX_PAD(0x430, 0x104, 7, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 IOMUX_PAD(0x434, 0x108, 0, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT18__GPIO6_4 IOMUX_PAD(0x434, 0x108, 1, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT18__UART5_RTS IOMUX_PAD(0x434, 0x108, 2, 0x894, 2, 0) +#define _MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 IOMUX_PAD(0x434, 0x108, 4, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 IOMUX_PAD(0x434, 0x108, 5, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47 IOMUX_PAD(0x434, 0x108, 6, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT18__TPIU_TRACE_15 IOMUX_PAD(0x434, 0x108, 7, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 IOMUX_PAD(0x438, 0x10C, 0, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT19__GPIO6_5 IOMUX_PAD(0x438, 0x10C, 1, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT19__UART5_CTS IOMUX_PAD(0x438, 0x10C, 2, 0x894, 3, 0) +#define _MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 IOMUX_PAD(0x438, 0x10C, 4, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 IOMUX_PAD(0x438, 0x10C, 5, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48 IOMUX_PAD(0x438, 0x10C, 6, 0x0, 0, 0) +#define _MX53_PAD_CSI0_DAT19__USBPHY2_BISTOK IOMUX_PAD(0x438, 0x10C, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_A25__EMI_WEIM_A_25 IOMUX_PAD(0x458, 0x110, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_A25__GPIO5_2 IOMUX_PAD(0x458, 0x110, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_A25__ECSPI2_RDY IOMUX_PAD(0x458, 0x110, 2, 0x0, 0, 0) +#define _MX53_PAD_EIM_A25__IPU_DI1_PIN12 IOMUX_PAD(0x458, 0x110, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_A25__CSPI_SS1 IOMUX_PAD(0x458, 0x110, 4, 0x790, 1, 0) +#define _MX53_PAD_EIM_A25__IPU_DI0_D1_CS IOMUX_PAD(0x458, 0x110, 6, 0x0, 0, 0) +#define _MX53_PAD_EIM_A25__USBPHY1_BISTOK IOMUX_PAD(0x458, 0x110, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_EB2__EMI_WEIM_EB_2 IOMUX_PAD(0x45C, 0x114, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_EB2__GPIO2_30 IOMUX_PAD(0x45C, 0x114, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK IOMUX_PAD(0x45C, 0x114, 2, 0x76C, 0, 0) +#define _MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS IOMUX_PAD(0x45C, 0x114, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_EB2__ECSPI1_SS0 IOMUX_PAD(0x45C, 0x114, 4, 0x7A8, 3, 0) +#define _MX53_PAD_EIM_EB2__I2C2_SCL IOMUX_PAD(0x45C, 0x114, 5 | IOMUX_CONFIG_SION, 0x81C, 1, 0) +#define _MX53_PAD_EIM_D16__EMI_WEIM_D_16 IOMUX_PAD(0x460, 0x118, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_D16__GPIO3_16 IOMUX_PAD(0x460, 0x118, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_D16__IPU_DI0_PIN5 IOMUX_PAD(0x460, 0x118, 2, 0x0, 0, 0) +#define _MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK IOMUX_PAD(0x460, 0x118, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_D16__ECSPI1_SCLK IOMUX_PAD(0x460, 0x118, 4, 0x79C, 3, 0) +#define _MX53_PAD_EIM_D16__I2C2_SDA IOMUX_PAD(0x460, 0x118, 5, 0x820, 1, 0) +#define _MX53_PAD_EIM_D17__EMI_WEIM_D_17 IOMUX_PAD(0x464, 0x11C, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_D17__GPIO3_17 IOMUX_PAD(0x464, 0x11C, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_D17__IPU_DI0_PIN6 IOMUX_PAD(0x464, 0x11C, 2, 0x0, 0, 0) +#define _MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN IOMUX_PAD(0x464, 0x11C, 3, 0x830, 0, 0) +#define _MX53_PAD_EIM_D17__ECSPI1_MISO IOMUX_PAD(0x464, 0x11C, 4, 0x7A0, 3, 0) +#define _MX53_PAD_EIM_D17__I2C3_SCL IOMUX_PAD(0x464, 0x11C, 5, 0x824, 0, 0) +#define _MX53_PAD_EIM_D18__EMI_WEIM_D_18 IOMUX_PAD(0x468, 0x120, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_D18__GPIO3_18 IOMUX_PAD(0x468, 0x120, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_D18__IPU_DI0_PIN7 IOMUX_PAD(0x468, 0x120, 2, 0x0, 0, 0) +#define _MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO IOMUX_PAD(0x468, 0x120, 3, 0x830, 1, 0) +#define _MX53_PAD_EIM_D18__ECSPI1_MOSI IOMUX_PAD(0x468, 0x120, 4, 0x7A4, 3, 0) +#define _MX53_PAD_EIM_D18__I2C3_SDA IOMUX_PAD(0x468, 0x120, 5, 0x828, 0, 0) +#define _MX53_PAD_EIM_D18__IPU_DI1_D0_CS IOMUX_PAD(0x468, 0x120, 6, 0x0, 0, 0) +#define _MX53_PAD_EIM_D19__EMI_WEIM_D_19 IOMUX_PAD(0x46C, 0x124, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_D19__GPIO3_19 IOMUX_PAD(0x46C, 0x124, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_D19__IPU_DI0_PIN8 IOMUX_PAD(0x46C, 0x124, 2, 0x0, 0, 0) +#define _MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS IOMUX_PAD(0x46C, 0x124, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_D19__ECSPI1_SS1 IOMUX_PAD(0x46C, 0x124, 4, 0x7AC, 2, 0) +#define _MX53_PAD_EIM_D19__EPIT1_EPITO IOMUX_PAD(0x46C, 0x124, 5, 0x0, 0, 0) +#define _MX53_PAD_EIM_D19__UART1_CTS IOMUX_PAD(0x46C, 0x124, 6, 0x874, 0, 0) +#define _MX53_PAD_EIM_D19__USBOH3_USBH2_OC IOMUX_PAD(0x46C, 0x124, 7, 0x8A4, 0, 0) +#define _MX53_PAD_EIM_D20__EMI_WEIM_D_20 IOMUX_PAD(0x470, 0x128, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_D20__GPIO3_20 IOMUX_PAD(0x470, 0x128, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_D20__IPU_DI0_PIN16 IOMUX_PAD(0x470, 0x128, 2, 0x0, 0, 0) +#define _MX53_PAD_EIM_D20__IPU_SER_DISP0_CS IOMUX_PAD(0x470, 0x128, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_D20__CSPI_SS0 IOMUX_PAD(0x470, 0x128, 4, 0x78C, 1, 0) +#define _MX53_PAD_EIM_D20__EPIT2_EPITO IOMUX_PAD(0x470, 0x128, 5, 0x0, 0, 0) +#define _MX53_PAD_EIM_D20__UART1_RTS IOMUX_PAD(0x470, 0x128, 6, 0x874, 1, 0) +#define _MX53_PAD_EIM_D20__USBOH3_USBH2_PWR IOMUX_PAD(0x470, 0x128, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_D21__EMI_WEIM_D_21 IOMUX_PAD(0x474, 0x12C, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_D21__GPIO3_21 IOMUX_PAD(0x474, 0x12C, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_D21__IPU_DI0_PIN17 IOMUX_PAD(0x474, 0x12C, 2, 0x0, 0, 0) +#define _MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK IOMUX_PAD(0x474, 0x12C, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_D21__CSPI_SCLK IOMUX_PAD(0x474, 0x12C, 4, 0x780, 1, 0) +#define _MX53_PAD_EIM_D21__I2C1_SCL IOMUX_PAD(0x474, 0x12C, 5, 0x814, 1, 0) +#define _MX53_PAD_EIM_D21__USBOH3_USBOTG_OC IOMUX_PAD(0x474, 0x12C, 6, 0x89C, 1, 0) +#define _MX53_PAD_EIM_D22__EMI_WEIM_D_22 IOMUX_PAD(0x478, 0x130, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_D22__GPIO3_22 IOMUX_PAD(0x478, 0x130, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_D22__IPU_DI0_PIN1 IOMUX_PAD(0x478, 0x130, 2, 0x0, 0, 0) +#define _MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN IOMUX_PAD(0x478, 0x130, 3, 0x82C, 0, 0) +#define _MX53_PAD_EIM_D22__CSPI_MISO IOMUX_PAD(0x478, 0x130, 4, 0x784, 1, 0) +#define _MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR IOMUX_PAD(0x478, 0x130, 6, 0x0, 0, 0) +#define _MX53_PAD_EIM_D23__EMI_WEIM_D_23 IOMUX_PAD(0x47C, 0x134, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_D23__GPIO3_23 IOMUX_PAD(0x47C, 0x134, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_D23__UART3_CTS IOMUX_PAD(0x47C, 0x134, 2, 0x884, 0, 0) +#define _MX53_PAD_EIM_D23__UART1_DCD IOMUX_PAD(0x47C, 0x134, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_D23__IPU_DI0_D0_CS IOMUX_PAD(0x47C, 0x134, 4, 0x0, 0, 0) +#define _MX53_PAD_EIM_D23__IPU_DI1_PIN2 IOMUX_PAD(0x47C, 0x134, 5, 0x0, 0, 0) +#define _MX53_PAD_EIM_D23__IPU_CSI1_DATA_EN IOMUX_PAD(0x47C, 0x134, 6, 0x834, 0, 0) +#define _MX53_PAD_EIM_D23__IPU_DI1_PIN14 IOMUX_PAD(0x47C, 0x134, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_EB3__EMI_WEIM_EB_3 IOMUX_PAD(0x480, 0x138, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_EB3__GPIO2_31 IOMUX_PAD(0x480, 0x138, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_EB3__UART3_RTS IOMUX_PAD(0x480, 0x138, 2, 0x884, 1, 0) +#define _MX53_PAD_EIM_EB3__UART1_RI IOMUX_PAD(0x480, 0x138, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_EB3__IPU_DI1_PIN3 IOMUX_PAD(0x480, 0x138, 5, 0x0, 0, 0) +#define _MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC IOMUX_PAD(0x480, 0x138, 6, 0x838, 0, 0) +#define _MX53_PAD_EIM_EB3__IPU_DI1_PIN16 IOMUX_PAD(0x480, 0x138, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_D24__EMI_WEIM_D_24 IOMUX_PAD(0x484, 0x13C, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_D24__GPIO3_24 IOMUX_PAD(0x484, 0x13C, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_D24__UART3_TXD_MUX IOMUX_PAD(0x484, 0x13C, 2, 0x888, 0, 0) +#define _MX53_PAD_EIM_D24__ECSPI1_SS2 IOMUX_PAD(0x484, 0x13C, 3, 0x7B0, 1, 0) +#define _MX53_PAD_EIM_D24__CSPI_SS2 IOMUX_PAD(0x484, 0x13C, 4, 0x794, 1, 0) +#define _MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS IOMUX_PAD(0x484, 0x13C, 5, 0x754, 1, 0) +#define _MX53_PAD_EIM_D24__ECSPI2_SS2 IOMUX_PAD(0x484, 0x13C, 6, 0x0, 0, 0) +#define _MX53_PAD_EIM_D24__UART1_DTR IOMUX_PAD(0x484, 0x13C, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_D25__EMI_WEIM_D_25 IOMUX_PAD(0x488, 0x140, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_D25__GPIO3_25 IOMUX_PAD(0x488, 0x140, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_D25__UART3_RXD_MUX IOMUX_PAD(0x488, 0x140, 2, 0x888, 1, 0) +#define _MX53_PAD_EIM_D25__ECSPI1_SS3 IOMUX_PAD(0x488, 0x140, 3, 0x7B4, 1, 0) +#define _MX53_PAD_EIM_D25__CSPI_SS3 IOMUX_PAD(0x488, 0x140, 4, 0x798, 1, 0) +#define _MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC IOMUX_PAD(0x488, 0x140, 5, 0x750, 1, 0) +#define _MX53_PAD_EIM_D25__ECSPI2_SS3 IOMUX_PAD(0x488, 0x140, 6, 0x0, 0, 0) +#define _MX53_PAD_EIM_D25__UART1_DSR IOMUX_PAD(0x488, 0x140, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_D26__EMI_WEIM_D_26 IOMUX_PAD(0x48C, 0x144, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_D26__GPIO3_26 IOMUX_PAD(0x48C, 0x144, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_D26__UART2_TXD_MUX IOMUX_PAD(0x48C, 0x144, 2, 0x880, 0, 0) +#define _MX53_PAD_EIM_D26__FIRI_RXD IOMUX_PAD(0x48C, 0x144, 3, 0x80C, 0, 0) +#define _MX53_PAD_EIM_D26__IPU_CSI0_D_1 IOMUX_PAD(0x48C, 0x144, 4, 0x0, 0, 0) +#define _MX53_PAD_EIM_D26__IPU_DI1_PIN11 IOMUX_PAD(0x48C, 0x144, 5, 0x0, 0, 0) +#define _MX53_PAD_EIM_D26__IPU_SISG_2 IOMUX_PAD(0x48C, 0x144, 6, 0x0, 0, 0) +#define _MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 IOMUX_PAD(0x48C, 0x144, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_D27__EMI_WEIM_D_27 IOMUX_PAD(0x490, 0x148, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_D27__GPIO3_27 IOMUX_PAD(0x490, 0x148, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_D27__UART2_RXD_MUX IOMUX_PAD(0x490, 0x148, 2, 0x880, 1, 0) +#define _MX53_PAD_EIM_D27__FIRI_TXD IOMUX_PAD(0x490, 0x148, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_D27__IPU_CSI0_D_0 IOMUX_PAD(0x490, 0x148, 4, 0x0, 0, 0) +#define _MX53_PAD_EIM_D27__IPU_DI1_PIN13 IOMUX_PAD(0x490, 0x148, 5, 0x0, 0, 0) +#define _MX53_PAD_EIM_D27__IPU_SISG_3 IOMUX_PAD(0x490, 0x148, 6, 0x0, 0, 0) +#define _MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 IOMUX_PAD(0x490, 0x148, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_D28__EMI_WEIM_D_28 IOMUX_PAD(0x494, 0x14C, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_D28__GPIO3_28 IOMUX_PAD(0x494, 0x14C, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_D28__UART2_CTS IOMUX_PAD(0x494, 0x14C, 2, 0x87C, 0, 0) +#define _MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO IOMUX_PAD(0x494, 0x14C, 3, 0x82C, 1, 0) +#define _MX53_PAD_EIM_D28__CSPI_MOSI IOMUX_PAD(0x494, 0x14C, 4, 0x788, 1, 0) +#define _MX53_PAD_EIM_D28__I2C1_SDA IOMUX_PAD(0x494, 0x14C, 5, 0x818, 1, 0) +#define _MX53_PAD_EIM_D28__IPU_EXT_TRIG IOMUX_PAD(0x494, 0x14C, 6, 0x0, 0, 0) +#define _MX53_PAD_EIM_D28__IPU_DI0_PIN13 IOMUX_PAD(0x494, 0x14C, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_D29__EMI_WEIM_D_29 IOMUX_PAD(0x498, 0x150, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_D29__GPIO3_29 IOMUX_PAD(0x498, 0x150, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_D29__UART2_RTS IOMUX_PAD(0x498, 0x150, 2, 0x87C, 1, 0) +#define _MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS IOMUX_PAD(0x498, 0x150, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_D29__CSPI_SS0 IOMUX_PAD(0x498, 0x150, 4, 0x78C, 2, 0) +#define _MX53_PAD_EIM_D29__IPU_DI1_PIN15 IOMUX_PAD(0x498, 0x150, 5, 0x0, 0, 0) +#define _MX53_PAD_EIM_D29__IPU_CSI1_VSYNC IOMUX_PAD(0x498, 0x150, 6, 0x83C, 0, 0) +#define _MX53_PAD_EIM_D29__IPU_DI0_PIN14 IOMUX_PAD(0x498, 0x150, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_D30__EMI_WEIM_D_30 IOMUX_PAD(0x49C, 0x154, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_D30__GPIO3_30 IOMUX_PAD(0x49C, 0x154, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_D30__UART3_CTS IOMUX_PAD(0x49C, 0x154, 2, 0x884, 2, 0) +#define _MX53_PAD_EIM_D30__IPU_CSI0_D_3 IOMUX_PAD(0x49C, 0x154, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_D30__IPU_DI0_PIN11 IOMUX_PAD(0x49C, 0x154, 4, 0x0, 0, 0) +#define _MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 IOMUX_PAD(0x49C, 0x154, 5, 0x0, 0, 0) +#define _MX53_PAD_EIM_D30__USBOH3_USBH1_OC IOMUX_PAD(0x49C, 0x154, 6, 0x8A0, 0, 0) +#define _MX53_PAD_EIM_D30__USBOH3_USBH2_OC IOMUX_PAD(0x49C, 0x154, 7, 0x8A4, 1, 0) +#define _MX53_PAD_EIM_D31__EMI_WEIM_D_31 IOMUX_PAD(0x4A0, 0x158, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_D31__GPIO3_31 IOMUX_PAD(0x4A0, 0x158, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_D31__UART3_RTS IOMUX_PAD(0x4A0, 0x158, 2, 0x884, 3, 0) +#define _MX53_PAD_EIM_D31__IPU_CSI0_D_2 IOMUX_PAD(0x4A0, 0x158, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_D31__IPU_DI0_PIN12 IOMUX_PAD(0x4A0, 0x158, 4, 0x0, 0, 0) +#define _MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 IOMUX_PAD(0x4A0, 0x158, 5, 0x0, 0, 0) +#define _MX53_PAD_EIM_D31__USBOH3_USBH1_PWR IOMUX_PAD(0x4A0, 0x158, 6, 0x0, 0, 0) +#define _MX53_PAD_EIM_D31__USBOH3_USBH2_PWR IOMUX_PAD(0x4A0, 0x158, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_A24__EMI_WEIM_A_24 IOMUX_PAD(0x4A8, 0x15C, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_A24__GPIO5_4 IOMUX_PAD(0x4A8, 0x15C, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 IOMUX_PAD(0x4A8, 0x15C, 2, 0x0, 0, 0) +#define _MX53_PAD_EIM_A24__IPU_CSI1_D_19 IOMUX_PAD(0x4A8, 0x15C, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_A24__IPU_SISG_2 IOMUX_PAD(0x4A8, 0x15C, 6, 0x0, 0, 0) +#define _MX53_PAD_EIM_A24__USBPHY2_BVALID IOMUX_PAD(0x4A8, 0x15C, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_A23__EMI_WEIM_A_23 IOMUX_PAD(0x4AC, 0x160, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_A23__GPIO6_6 IOMUX_PAD(0x4AC, 0x160, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 IOMUX_PAD(0x4AC, 0x160, 2, 0x0, 0, 0) +#define _MX53_PAD_EIM_A23__IPU_CSI1_D_18 IOMUX_PAD(0x4AC, 0x160, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_A23__IPU_SISG_3 IOMUX_PAD(0x4AC, 0x160, 6, 0x0, 0, 0) +#define _MX53_PAD_EIM_A23__USBPHY2_ENDSESSION IOMUX_PAD(0x4AC, 0x160, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_A22__EMI_WEIM_A_22 IOMUX_PAD(0x4B0, 0x164, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_A22__GPIO2_16 IOMUX_PAD(0x4B0, 0x164, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 IOMUX_PAD(0x4B0, 0x164, 2, 0x0, 0, 0) +#define _MX53_PAD_EIM_A22__IPU_CSI1_D_17 IOMUX_PAD(0x4B0, 0x164, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_A22__SRC_BT_CFG1_7 IOMUX_PAD(0x4B0, 0x164, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_A21__EMI_WEIM_A_21 IOMUX_PAD(0x4B4, 0x168, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_A21__GPIO2_17 IOMUX_PAD(0x4B4, 0x168, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 IOMUX_PAD(0x4B4, 0x168, 2, 0x0, 0, 0) +#define _MX53_PAD_EIM_A21__IPU_CSI1_D_16 IOMUX_PAD(0x4B4, 0x168, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_A21__SRC_BT_CFG1_6 IOMUX_PAD(0x4B4, 0x168, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_A20__EMI_WEIM_A_20 IOMUX_PAD(0x4B8, 0x16C, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_A20__GPIO2_18 IOMUX_PAD(0x4B8, 0x16C, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 IOMUX_PAD(0x4B8, 0x16C, 2, 0x0, 0, 0) +#define _MX53_PAD_EIM_A20__IPU_CSI1_D_15 IOMUX_PAD(0x4B8, 0x16C, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_A20__SRC_BT_CFG1_5 IOMUX_PAD(0x4B8, 0x16C, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_A19__EMI_WEIM_A_19 IOMUX_PAD(0x4BC, 0x170, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_A19__GPIO2_19 IOMUX_PAD(0x4BC, 0x170, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 IOMUX_PAD(0x4BC, 0x170, 2, 0x0, 0, 0) +#define _MX53_PAD_EIM_A19__IPU_CSI1_D_14 IOMUX_PAD(0x4BC, 0x170, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_A19__SRC_BT_CFG1_4 IOMUX_PAD(0x4BC, 0x170, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_A18__EMI_WEIM_A_18 IOMUX_PAD(0x4C0, 0x174, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_A18__GPIO2_20 IOMUX_PAD(0x4C0, 0x174, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 IOMUX_PAD(0x4C0, 0x174, 2, 0x0, 0, 0) +#define _MX53_PAD_EIM_A18__IPU_CSI1_D_13 IOMUX_PAD(0x4C0, 0x174, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_A18__SRC_BT_CFG1_3 IOMUX_PAD(0x4C0, 0x174, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_A17__EMI_WEIM_A_17 IOMUX_PAD(0x4C4, 0x178, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_A17__GPIO2_21 IOMUX_PAD(0x4C4, 0x178, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 IOMUX_PAD(0x4C4, 0x178, 2, 0x0, 0, 0) +#define _MX53_PAD_EIM_A17__IPU_CSI1_D_12 IOMUX_PAD(0x4C4, 0x178, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_A17__SRC_BT_CFG1_2 IOMUX_PAD(0x4C4, 0x178, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_A16__EMI_WEIM_A_16 IOMUX_PAD(0x4C8, 0x17C, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_A16__GPIO2_22 IOMUX_PAD(0x4C8, 0x17C, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK IOMUX_PAD(0x4C8, 0x17C, 2, 0x0, 0, 0) +#define _MX53_PAD_EIM_A16__IPU_CSI1_PIXCLK IOMUX_PAD(0x4C8, 0x17C, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_A16__SRC_BT_CFG1_1 IOMUX_PAD(0x4C8, 0x17C, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_CS0__EMI_WEIM_CS_0 IOMUX_PAD(0x4CC, 0x180, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_CS0__GPIO2_23 IOMUX_PAD(0x4CC, 0x180, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_CS0__ECSPI2_SCLK IOMUX_PAD(0x4CC, 0x180, 2, 0x7B8, 2, 0) +#define _MX53_PAD_EIM_CS0__IPU_DI1_PIN5 IOMUX_PAD(0x4CC, 0x180, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 IOMUX_PAD(0x4D0, 0x184, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_CS1__GPIO2_24 IOMUX_PAD(0x4D0, 0x184, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_CS1__ECSPI2_MOSI IOMUX_PAD(0x4D0, 0x184, 2, 0x7C0, 2, 0) +#define _MX53_PAD_EIM_CS1__IPU_DI1_PIN6 IOMUX_PAD(0x4D0, 0x184, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_OE__EMI_WEIM_OE IOMUX_PAD(0x4D4, 0x188, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_OE__GPIO2_25 IOMUX_PAD(0x4D4, 0x188, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_OE__ECSPI2_MISO IOMUX_PAD(0x4D4, 0x188, 2, 0x7BC, 2, 0) +#define _MX53_PAD_EIM_OE__IPU_DI1_PIN7 IOMUX_PAD(0x4D4, 0x188, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_OE__USBPHY2_IDDIG IOMUX_PAD(0x4D4, 0x188, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_RW__EMI_WEIM_RW IOMUX_PAD(0x4D8, 0x18C, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_RW__GPIO2_26 IOMUX_PAD(0x4D8, 0x18C, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_RW__ECSPI2_SS0 IOMUX_PAD(0x4D8, 0x18C, 2, 0x7C4, 2, 0) +#define _MX53_PAD_EIM_RW__IPU_DI1_PIN8 IOMUX_PAD(0x4D8, 0x18C, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_RW__USBPHY2_HOSTDISCONNECT IOMUX_PAD(0x4D8, 0x18C, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_LBA__EMI_WEIM_LBA IOMUX_PAD(0x4DC, 0x190, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_LBA__GPIO2_27 IOMUX_PAD(0x4DC, 0x190, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_LBA__ECSPI2_SS1 IOMUX_PAD(0x4DC, 0x190, 2, 0x7C8, 1, 0) +#define _MX53_PAD_EIM_LBA__IPU_DI1_PIN17 IOMUX_PAD(0x4DC, 0x190, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_LBA__SRC_BT_CFG1_0 IOMUX_PAD(0x4DC, 0x190, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_EB0__EMI_WEIM_EB_0 IOMUX_PAD(0x4E4, 0x194, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_EB0__GPIO2_28 IOMUX_PAD(0x4E4, 0x194, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 IOMUX_PAD(0x4E4, 0x194, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_EB0__IPU_CSI1_D_11 IOMUX_PAD(0x4E4, 0x194, 4, 0x0, 0, 0) +#define _MX53_PAD_EIM_EB0__GPC_PMIC_RDY IOMUX_PAD(0x4E4, 0x194, 5, 0x810, 0, 0) +#define _MX53_PAD_EIM_EB0__SRC_BT_CFG2_7 IOMUX_PAD(0x4E4, 0x194, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_EB1__EMI_WEIM_EB_1 IOMUX_PAD(0x4E8, 0x198, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_EB1__GPIO2_29 IOMUX_PAD(0x4E8, 0x198, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 IOMUX_PAD(0x4E8, 0x198, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_EB1__IPU_CSI1_D_10 IOMUX_PAD(0x4E8, 0x198, 4, 0x0, 0, 0) +#define _MX53_PAD_EIM_EB1__SRC_BT_CFG2_6 IOMUX_PAD(0x4E8, 0x198, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 IOMUX_PAD(0x4EC, 0x19C, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA0__GPIO3_0 IOMUX_PAD(0x4EC, 0x19C, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 IOMUX_PAD(0x4EC, 0x19C, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA0__IPU_CSI1_D_9 IOMUX_PAD(0x4EC, 0x19C, 4, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA0__SRC_BT_CFG2_5 IOMUX_PAD(0x4EC, 0x19C, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 IOMUX_PAD(0x4F0, 0x1A0, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA1__GPIO3_1 IOMUX_PAD(0x4F0, 0x1A0, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 IOMUX_PAD(0x4F0, 0x1A0, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA1__IPU_CSI1_D_8 IOMUX_PAD(0x4F0, 0x1A0, 4, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA1__SRC_BT_CFG2_4 IOMUX_PAD(0x4F0, 0x1A0, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 IOMUX_PAD(0x4F4, 0x1A4, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA2__GPIO3_2 IOMUX_PAD(0x4F4, 0x1A4, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 IOMUX_PAD(0x4F4, 0x1A4, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA2__IPU_CSI1_D_7 IOMUX_PAD(0x4F4, 0x1A4, 4, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA2__SRC_BT_CFG2_3 IOMUX_PAD(0x4F4, 0x1A4, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 IOMUX_PAD(0x4F8, 0x1A8, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA3__GPIO3_3 IOMUX_PAD(0x4F8, 0x1A8, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 IOMUX_PAD(0x4F8, 0x1A8, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA3__IPU_CSI1_D_6 IOMUX_PAD(0x4F8, 0x1A8, 4, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA3__SRC_BT_CFG2_2 IOMUX_PAD(0x4F8, 0x1A8, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 IOMUX_PAD(0x4FC, 0x1AC, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA4__GPIO3_4 IOMUX_PAD(0x4FC, 0x1AC, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 IOMUX_PAD(0x4FC, 0x1AC, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA4__IPU_CSI1_D_5 IOMUX_PAD(0x4FC, 0x1AC, 4, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA4__SRC_BT_CFG3_7 IOMUX_PAD(0x4FC, 0x1AC, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 IOMUX_PAD(0x500, 0x1B0, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA5__GPIO3_5 IOMUX_PAD(0x500, 0x1B0, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 IOMUX_PAD(0x500, 0x1B0, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA5__IPU_CSI1_D_4 IOMUX_PAD(0x500, 0x1B0, 4, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA5__SRC_BT_CFG3_6 IOMUX_PAD(0x500, 0x1B0, 17, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 IOMUX_PAD(0x504, 0x1B4, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA6__GPIO3_6 IOMUX_PAD(0x504, 0x1B4, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 IOMUX_PAD(0x504, 0x1B4, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA6__IPU_CSI1_D_3 IOMUX_PAD(0x504, 0x1B4, 4, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA6__SRC_BT_CFG3_5 IOMUX_PAD(0x504, 0x1B4, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7 IOMUX_PAD(0x508, 0x1B8, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA7__GPIO3_7 IOMUX_PAD(0x508, 0x1B8, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 IOMUX_PAD(0x508, 0x1B8, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA7__IPU_CSI1_D_2 IOMUX_PAD(0x508, 0x1B8, 4, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA7__SRC_BT_CFG3_4 IOMUX_PAD(0x508, 0x1B8, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8 IOMUX_PAD(0x50C, 0x1BC, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA8__GPIO3_8 IOMUX_PAD(0x50C, 0x1BC, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 IOMUX_PAD(0x50C, 0x1BC, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA8__IPU_CSI1_D_1 IOMUX_PAD(0x50C, 0x1BC, 4, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA8__SRC_BT_CFG3_3 IOMUX_PAD(0x50C, 0x1BC, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9 IOMUX_PAD(0x510, 0x1C0, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA9__GPIO3_9 IOMUX_PAD(0x510, 0x1C0, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 IOMUX_PAD(0x510, 0x1C0, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA9__IPU_CSI1_D_0 IOMUX_PAD(0x510, 0x1C0, 4, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA9__SRC_BT_CFG3_2 IOMUX_PAD(0x510, 0x1C0, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10 IOMUX_PAD(0x514, 0x1C4, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA10__GPIO3_10 IOMUX_PAD(0x514, 0x1C4, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA10__IPU_DI1_PIN15 IOMUX_PAD(0x514, 0x1C4, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA10__IPU_CSI1_DATA_EN IOMUX_PAD(0x514, 0x1C4, 4, 0x834, 1, 0) +#define _MX53_PAD_EIM_DA10__SRC_BT_CFG3_1 IOMUX_PAD(0x514, 0x1C4, 7, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11 IOMUX_PAD(0x518, 0x1C8, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA11__GPIO3_11 IOMUX_PAD(0x518, 0x1C8, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA11__IPU_DI1_PIN2 IOMUX_PAD(0x518, 0x1C8, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA11__IPU_CSI1_HSYNC IOMUX_PAD(0x518, 0x1C8, 4, 0x838, 1, 0) +#define _MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12 IOMUX_PAD(0x51C, 0x1CC, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA12__GPIO3_12 IOMUX_PAD(0x51C, 0x1CC, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA12__IPU_DI1_PIN3 IOMUX_PAD(0x51C, 0x1CC, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA12__IPU_CSI1_VSYNC IOMUX_PAD(0x51C, 0x1CC, 4, 0x83C, 1, 0) +#define _MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13 IOMUX_PAD(0x520, 0x1D0, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA13__GPIO3_13 IOMUX_PAD(0x520, 0x1D0, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA13__IPU_DI1_D0_CS IOMUX_PAD(0x520, 0x1D0, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA13__CCM_DI1_EXT_CLK IOMUX_PAD(0x520, 0x1D0, 4, 0x76C, 1, 0) +#define _MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14 IOMUX_PAD(0x524, 0x1D4, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA14__GPIO3_14 IOMUX_PAD(0x524, 0x1D4, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA14__IPU_DI1_D1_CS IOMUX_PAD(0x524, 0x1D4, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA14__CCM_DI0_EXT_CLK IOMUX_PAD(0x524, 0x1D4, 4, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15 IOMUX_PAD(0x528, 0x1D8, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA15__GPIO3_15 IOMUX_PAD(0x528, 0x1D8, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA15__IPU_DI1_PIN1 IOMUX_PAD(0x528, 0x1D8, 3, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA15__IPU_DI1_PIN4 IOMUX_PAD(0x528, 0x1D8, 4, 0x0, 0, 0) +#define _MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B IOMUX_PAD(0x52C, 0x1DC, 0, 0x0, 0, 0) +#define _MX53_PAD_NANDF_WE_B__GPIO6_12 IOMUX_PAD(0x52C, 0x1DC, 1, 0x0, 0, 0) +#define _MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B IOMUX_PAD(0x530, 0x1E0, 0, 0x0, 0, 0) +#define _MX53_PAD_NANDF_RE_B__GPIO6_13 IOMUX_PAD(0x530, 0x1E0, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT IOMUX_PAD(0x534, 0x1E4, 0, 0x0, 0, 0) +#define _MX53_PAD_EIM_WAIT__GPIO5_0 IOMUX_PAD(0x534, 0x1E4, 1, 0x0, 0, 0) +#define _MX53_PAD_EIM_WAIT__EMI_WEIM_DTACK_B IOMUX_PAD(0x534, 0x1E4, 2, 0x0, 0, 0) +#define _MX53_PAD_LVDS1_TX3_P__GPIO6_22 IOMUX_PAD(NON_PAD_I, 0x1EC, 0, 0x0, 0, 0) +#define _MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 IOMUX_PAD(NON_PAD_I, 0x1EC, 1, 0x0, 0, 0) +#define _MX53_PAD_LVDS1_TX2_P__GPIO6_24 IOMUX_PAD(NON_PAD_I, 0x1F0, 0, 0x0, 0, 0) +#define _MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 IOMUX_PAD(NON_PAD_I, 0x1F0, 1, 0x0, 0, 0) +#define _MX53_PAD_LVDS1_CLK_P__GPIO6_26 IOMUX_PAD(NON_PAD_I, 0x1F4, 0, 0x0, 0, 0) +#define _MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK IOMUX_PAD(NON_PAD_I, 0x1F4, 1, 0x0, 0, 0) +#define _MX53_PAD_LVDS1_TX1_P__GPIO6_28 IOMUX_PAD(NON_PAD_I, 0x1F8, 0, 0x0, 0, 0) +#define _MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 IOMUX_PAD(NON_PAD_I, 0x1F8, 1, 0x0, 0, 0) +#define _MX53_PAD_LVDS1_TX0_P__GPIO6_30 IOMUX_PAD(NON_PAD_I, 0x1FC, 0, 0x0, 0, 0) +#define _MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 IOMUX_PAD(NON_PAD_I, 0x1FC, 1, 0x0, 0, 0) +#define _MX53_PAD_LVDS0_TX3_P__GPIO7_22 IOMUX_PAD(NON_PAD_I, 0x200, 0, 0x0, 0, 0) +#define _MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 IOMUX_PAD(NON_PAD_I, 0x200, 1, 0x0, 0, 0) +#define _MX53_PAD_LVDS0_CLK_P__GPIO7_24 IOMUX_PAD(NON_PAD_I, 0x204, 0, 0x0, 0, 0) +#define _MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK IOMUX_PAD(NON_PAD_I, 0x204, 1, 0x0, 0, 0) +#define _MX53_PAD_LVDS0_TX2_P__GPIO7_26 IOMUX_PAD(NON_PAD_I, 0x208, 0, 0x0, 0, 0) +#define _MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 IOMUX_PAD(NON_PAD_I, 0x208, 1, 0x0, 0, 0) +#define _MX53_PAD_LVDS0_TX1_P__GPIO7_28 IOMUX_PAD(NON_PAD_I, 0x20C, 0, 0x0, 0, 0) +#define _MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 IOMUX_PAD(NON_PAD_I, 0x20C, 1, 0x0, 0, 0) +#define _MX53_PAD_LVDS0_TX0_P__GPIO7_30 IOMUX_PAD(NON_PAD_I, 0x210, 0, 0x0, 0, 0) +#define _MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 IOMUX_PAD(NON_PAD_I, 0x210, 1, 0x0, 0, 0) +#define _MX53_PAD_GPIO_10__GPIO4_0 IOMUX_PAD(0x540, 0x214, 0, 0x0, 0, 0) +#define _MX53_PAD_GPIO_10__OSC32k_32K_OUT IOMUX_PAD(0x540, 0x214, 1, 0x0, 0, 0) +#define _MX53_PAD_GPIO_11__GPIO4_1 IOMUX_PAD(0x544, 0x218, 0, 0x0, 0, 0) +#define _MX53_PAD_GPIO_12__GPIO4_2 IOMUX_PAD(0x548, 0x21C, 0, 0x0, 0, 0) +#define _MX53_PAD_GPIO_13__GPIO4_3 IOMUX_PAD(0x54C, 0x220, 0, 0x0, 0, 0) +#define _MX53_PAD_GPIO_14__GPIO4_4 IOMUX_PAD(0x550, 0x224, 0, 0x0, 0, 0) +#define _MX53_PAD_NANDF_CLE__EMI_NANDF_CLE IOMUX_PAD(0x5A0, 0x228, 0, 0x0, 0, 0) +#define _MX53_PAD_NANDF_CLE__GPIO6_7 IOMUX_PAD(0x5A0, 0x228, 1, 0x0, 0, 0) +#define _MX53_PAD_NANDF_CLE__USBPHY1_VSTATUS_0 IOMUX_PAD(0x5A0, 0x228, 7, 0x0, 0, 0) +#define _MX53_PAD_NANDF_ALE__EMI_NANDF_ALE IOMUX_PAD(0x5A4, 0x22C, 0, 0x0, 0, 0) +#define _MX53_PAD_NANDF_ALE__GPIO6_8 IOMUX_PAD(0x5A4, 0x22C, 1, 0x0, 0, 0) +#define _MX53_PAD_NANDF_ALE__USBPHY1_VSTATUS_1 IOMUX_PAD(0x5A4, 0x22C, 7, 0x0, 0, 0) +#define _MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B IOMUX_PAD(0x5A8, 0x230, 0, 0x0, 0, 0) +#define _MX53_PAD_NANDF_WP_B__GPIO6_9 IOMUX_PAD(0x5A8, 0x230, 1, 0x0, 0, 0) +#define _MX53_PAD_NANDF_WP_B__USBPHY1_VSTATUS_2 IOMUX_PAD(0x5A8, 0x230, 7, 0x0, 0, 0) +#define _MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 IOMUX_PAD(0x5AC, 0x234, 0, 0x0, 0, 0) +#define _MX53_PAD_NANDF_RB0__GPIO6_10 IOMUX_PAD(0x5AC, 0x234, 1, 0x0, 0, 0) +#define _MX53_PAD_NANDF_RB0__USBPHY1_VSTATUS_3 IOMUX_PAD(0x5AC, 0x234, 7, 0x0, 0, 0) +#define _MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 IOMUX_PAD(0x5B0, 0x238, 0, 0x0, 0, 0) +#define _MX53_PAD_NANDF_CS0__GPIO6_11 IOMUX_PAD(0x5B0, 0x238, 1, 0x0, 0, 0) +#define _MX53_PAD_NANDF_CS0__USBPHY1_VSTATUS_4 IOMUX_PAD(0x5B0, 0x238, 7, 0x0, 0, 0) +#define _MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1 IOMUX_PAD(0x5B4, 0x23C, 0, 0x0, 0, 0) +#define _MX53_PAD_NANDF_CS1__GPIO6_14 IOMUX_PAD(0x5B4, 0x23C, 1, 0x0, 0, 0) +#define _MX53_PAD_NANDF_CS1__MLB_MLBCLK IOMUX_PAD(0x5B4, 0x23C, 6, 0x858, 0, 0) +#define _MX53_PAD_NANDF_CS1__USBPHY1_VSTATUS_5 IOMUX_PAD(0x5B4, 0x23C, 7, 0x0, 0, 0) +#define _MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2 IOMUX_PAD(0x5B8, 0x240, 0, 0x0, 0, 0) +#define _MX53_PAD_NANDF_CS2__GPIO6_15 IOMUX_PAD(0x5B8, 0x240, 1, 0x0, 0, 0) +#define _MX53_PAD_NANDF_CS2__IPU_SISG_0 IOMUX_PAD(0x5B8, 0x240, 2, 0x0, 0, 0) +#define _MX53_PAD_NANDF_CS2__ESAI1_TX0 IOMUX_PAD(0x5B8, 0x240, 3, 0x7E4, 0, 0) +#define _MX53_PAD_NANDF_CS2__EMI_WEIM_CRE IOMUX_PAD(0x5B8, 0x240, 4, 0x0, 0, 0) +#define _MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK IOMUX_PAD(0x5B8, 0x240, 5, 0x0, 0, 0) +#define _MX53_PAD_NANDF_CS2__MLB_MLBSIG IOMUX_PAD(0x5B8, 0x240, 6, 0x860, 0, 0) +#define _MX53_PAD_NANDF_CS2__USBPHY1_VSTATUS_6 IOMUX_PAD(0x5B8, 0x240, 7, 0x0, 0, 0) +#define _MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3 IOMUX_PAD(0x5BC, 0x244, 0, 0x0, 0, 0) +#define _MX53_PAD_NANDF_CS3__GPIO6_16 IOMUX_PAD(0x5BC, 0x244, 1, 0x0, 0, 0) +#define _MX53_PAD_NANDF_CS3__IPU_SISG_1 IOMUX_PAD(0x5BC, 0x244, 2, 0x0, 0, 0) +#define _MX53_PAD_NANDF_CS3__ESAI1_TX1 IOMUX_PAD(0x5BC, 0x244, 3, 0x7E8, 0, 0) +#define _MX53_PAD_NANDF_CS3__EMI_WEIM_A_26 IOMUX_PAD(0x5BC, 0x244, 4, 0x0, 0, 0) +#define _MX53_PAD_NANDF_CS3__MLB_MLBDAT IOMUX_PAD(0x5BC, 0x244, 6, 0x85C, 0, 0) +#define _MX53_PAD_NANDF_CS3__USBPHY1_VSTATUS_7 IOMUX_PAD(0x5BC, 0x244, 7, 0x0, 0, 0) +#define _MX53_PAD_FEC_MDIO__FEC_MDIO IOMUX_PAD(0x5C4, 0x248, 0, 0x804, 1, 0) +#define _MX53_PAD_FEC_MDIO__GPIO1_22 IOMUX_PAD(0x5C4, 0x248, 1, 0x0, 0, 0) +#define _MX53_PAD_FEC_MDIO__ESAI1_SCKR IOMUX_PAD(0x5C4, 0x248, 2, 0x7DC, 0, 0) +#define _MX53_PAD_FEC_MDIO__FEC_COL IOMUX_PAD(0x5C4, 0x248, 3, 0x800, 1, 0) +#define _MX53_PAD_FEC_MDIO__RTC_CE_RTC_PS2 IOMUX_PAD(0x5C4, 0x248, 4, 0x0, 0, 0) +#define _MX53_PAD_FEC_MDIO__SDMA_DEBUG_BUS_DEVICE_3 IOMUX_PAD(0x5C4, 0x248, 5, 0x0, 0, 0) +#define _MX53_PAD_FEC_MDIO__EMI_EMI_DEBUG_49 IOMUX_PAD(0x5C4, 0x248, 6, 0x0, 0, 0) +#define _MX53_PAD_FEC_REF_CLK__FEC_TX_CLK IOMUX_PAD(0x5C8, 0x24C, 0, 0x0, 0, 0) +#define _MX53_PAD_FEC_REF_CLK__GPIO1_23 IOMUX_PAD(0x5C8, 0x24C, 1, 0x0, 0, 0) +#define _MX53_PAD_FEC_REF_CLK__ESAI1_FSR IOMUX_PAD(0x5C8, 0x24C, 2, 0x7CC, 0, 0) +#define _MX53_PAD_FEC_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4 IOMUX_PAD(0x5C8, 0x24C, 5, 0x0, 0, 0) +#define _MX53_PAD_FEC_REF_CLK__EMI_EMI_DEBUG_50 IOMUX_PAD(0x5C8, 0x24C, 6, 0x0, 0, 0) +#define _MX53_PAD_FEC_RX_ER__FEC_RX_ER IOMUX_PAD(0x5CC, 0x250, 0, 0x0, 0, 0) +#define _MX53_PAD_FEC_RX_ER__GPIO1_24 IOMUX_PAD(0x5CC, 0x250, 1, 0x0, 0, 0) +#define _MX53_PAD_FEC_RX_ER__ESAI1_HCKR IOMUX_PAD(0x5CC, 0x250, 2, 0x7D4, 0, 0) +#define _MX53_PAD_FEC_RX_ER__FEC_RX_CLK IOMUX_PAD(0x5CC, 0x250, 3, 0x808, 1, 0) +#define _MX53_PAD_FEC_RX_ER__RTC_CE_RTC_PS3 IOMUX_PAD(0x5CC, 0x250, 4, 0x0, 0, 0) +#define _MX53_PAD_FEC_CRS_DV__FEC_RX_DV IOMUX_PAD(0x5D0, 0x254, 0, 0x0, 0, 0) +#define _MX53_PAD_FEC_CRS_DV__GPIO1_25 IOMUX_PAD(0x5D0, 0x254, 1, 0x0, 0, 0) +#define _MX53_PAD_FEC_CRS_DV__ESAI1_SCKT IOMUX_PAD(0x5D0, 0x254, 2, 0x7E0, 0, 0) +#define _MX53_PAD_FEC_RXD1__FEC_RDATA_1 IOMUX_PAD(0x5D4, 0x258, 0, 0x0, 0, 0) +#define _MX53_PAD_FEC_RXD1__GPIO1_26 IOMUX_PAD(0x5D4, 0x258, 1, 0x0, 0, 0) +#define _MX53_PAD_FEC_RXD1__ESAI1_FST IOMUX_PAD(0x5D4, 0x258, 2, 0x7D0, 0, 0) +#define _MX53_PAD_FEC_RXD1__MLB_MLBSIG IOMUX_PAD(0x5D4, 0x258, 3, 0x860, 1, 0) +#define _MX53_PAD_FEC_RXD1__RTC_CE_RTC_PS1 IOMUX_PAD(0x5D4, 0x258, 4, 0x0, 0, 0) +#define _MX53_PAD_FEC_RXD0__FEC_RDATA_0 IOMUX_PAD(0x5D8, 0x25C, 0, 0x0, 0, 0) +#define _MX53_PAD_FEC_RXD0__GPIO1_27 IOMUX_PAD(0x5D8, 0x25C, 1, 0x0, 0, 0) +#define _MX53_PAD_FEC_RXD0__ESAI1_HCKT IOMUX_PAD(0x5D8, 0x25C, 2, 0x7D8, 0, 0) +#define _MX53_PAD_FEC_RXD0__OSC32k_32K_OUT IOMUX_PAD(0x5D8, 0x25C, 3, 0x0, 0, 0) +#define _MX53_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x5DC, 0x260, 0, 0x0, 0, 0) +#define _MX53_PAD_FEC_TX_EN__GPIO1_28 IOMUX_PAD(0x5DC, 0x260, 1, 0x0, 0, 0) +#define _MX53_PAD_FEC_TX_EN__ESAI1_TX3_RX2 IOMUX_PAD(0x5DC, 0x260, 2, 0x7F0, 0, 0) +#define _MX53_PAD_FEC_TXD1__FEC_TDATA_1 IOMUX_PAD(0x5E0, 0x264, 0, 0x0, 0, 0) +#define _MX53_PAD_FEC_TXD1__GPIO1_29 IOMUX_PAD(0x5E0, 0x264, 1, 0x0, 0, 0) +#define _MX53_PAD_FEC_TXD1__ESAI1_TX2_RX3 IOMUX_PAD(0x5E0, 0x264, 2, 0x7EC, 0, 0) +#define _MX53_PAD_FEC_TXD1__MLB_MLBCLK IOMUX_PAD(0x5E0, 0x264, 3, 0x858, 1, 0) +#define _MX53_PAD_FEC_TXD1__RTC_CE_RTC_PRSC_CLK IOMUX_PAD(0x5E0, 0x264, 4, 0x0, 0, 0) +#define _MX53_PAD_FEC_TXD0__FEC_TDATA_0 IOMUX_PAD(0x5E4, 0x268, 0, 0x0, 0, 0) +#define _MX53_PAD_FEC_TXD0__GPIO1_30 IOMUX_PAD(0x5E4, 0x268, 1, 0x0, 0, 0) +#define _MX53_PAD_FEC_TXD0__ESAI1_TX4_RX1 IOMUX_PAD(0x5E4, 0x268, 2, 0x7F4, 0, 0) +#define _MX53_PAD_FEC_TXD0__USBPHY2_DATAOUT_0 IOMUX_PAD(0x5E4, 0x268, 7, 0x0, 0, 0) +#define _MX53_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x5E8, 0x26C, 0, 0x0, 0, 0) +#define _MX53_PAD_FEC_MDC__GPIO1_31 IOMUX_PAD(0x5E8, 0x26C, 1, 0x0, 0, 0) +#define _MX53_PAD_FEC_MDC__ESAI1_TX5_RX0 IOMUX_PAD(0x5E8, 0x26C, 2, 0x7F8, 0, 0) +#define _MX53_PAD_FEC_MDC__MLB_MLBDAT IOMUX_PAD(0x5E8, 0x26C, 3, 0x85C, 1, 0) +#define _MX53_PAD_FEC_MDC__RTC_CE_RTC_ALARM1_TRIG IOMUX_PAD(0x5E8, 0x26C, 4, 0x0, 0, 0) +#define _MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1 IOMUX_PAD(0x5E8, 0x26C, 7, 0x0, 0, 0) +#define _MX53_PAD_PATA_DIOW__PATA_DIOW IOMUX_PAD(0x5F0, 0x270, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DIOW__GPIO6_17 IOMUX_PAD(0x5F0, 0x270, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DIOW__UART1_TXD_MUX IOMUX_PAD(0x5F0, 0x270, 3, 0x878, 2, 0) +#define _MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2 IOMUX_PAD(0x5F0, 0x270, 7, 0x0, 0, 0) +#define _MX53_PAD_PATA_DMACK__PATA_DMACK IOMUX_PAD(0x5F4, 0x274, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DMACK__GPIO6_18 IOMUX_PAD(0x5F4, 0x274, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DMACK__UART1_RXD_MUX IOMUX_PAD(0x5F4, 0x274, 3, 0x878, 3, 0) +#define _MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3 IOMUX_PAD(0x5F4, 0x274, 7, 0x0, 0, 0) +#define _MX53_PAD_PATA_DMARQ__PATA_DMARQ IOMUX_PAD(0x5F8, 0x278, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DMARQ__GPIO7_0 IOMUX_PAD(0x5F8, 0x278, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DMARQ__UART2_TXD_MUX IOMUX_PAD(0x5F8, 0x278, 3, 0x880, 2, 0) +#define _MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0 IOMUX_PAD(0x5F8, 0x278, 5, 0x0, 0, 0) +#define _MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4 IOMUX_PAD(0x5F8, 0x278, 7, 0x0, 0, 0) +#define _MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN IOMUX_PAD(0x5FC, 0x27C, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_BUFFER_EN__GPIO7_1 IOMUX_PAD(0x5FC, 0x27C, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX IOMUX_PAD(0x5FC, 0x27C, 3, 0x880, 3, 0) +#define _MX53_PAD_PATA_BUFFER_EN__CCM_CCM_OUT_1 IOMUX_PAD(0x5FC, 0x27C, 5, 0x0, 0, 0) +#define _MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5 IOMUX_PAD(0x5FC, 0x27C, 7, 0x0, 0, 0) +#define _MX53_PAD_PATA_INTRQ__PATA_INTRQ IOMUX_PAD(0x600, 0x280, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_INTRQ__GPIO7_2 IOMUX_PAD(0x600, 0x280, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_INTRQ__UART2_CTS IOMUX_PAD(0x600, 0x280, 3, 0x87C, 2, 0) +#define _MX53_PAD_PATA_INTRQ__CAN1_TXCAN IOMUX_PAD(0x600, 0x280, 4, 0x0, 0, 0) +#define _MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2 IOMUX_PAD(0x600, 0x280, 5, 0x0, 0, 0) +#define _MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6 IOMUX_PAD(0x600, 0x280, 7, 0x0, 0, 0) +#define _MX53_PAD_PATA_DIOR__PATA_DIOR IOMUX_PAD(0x604, 0x284, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DIOR__GPIO7_3 IOMUX_PAD(0x604, 0x284, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DIOR__UART2_RTS IOMUX_PAD(0x604, 0x284, 3, 0x87C, 3, 0) +#define _MX53_PAD_PATA_DIOR__CAN1_RXCAN IOMUX_PAD(0x604, 0x284, 4, 0x760, 1, 0) +#define _MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7 IOMUX_PAD(0x604, 0x284, 7, 0x0, 0, 0) +#define _MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B IOMUX_PAD(0x608, 0x288, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_RESET_B__GPIO7_4 IOMUX_PAD(0x608, 0x288, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_RESET_B__ESDHC3_CMD IOMUX_PAD(0x608, 0x288, 2, 0x0, 0, 0) +#define _MX53_PAD_PATA_RESET_B__UART1_CTS IOMUX_PAD(0x608, 0x288, 3, 0x874, 2, 0) +#define _MX53_PAD_PATA_RESET_B__CAN2_TXCAN IOMUX_PAD(0x608, 0x288, 4, 0x0, 0, 0) +#define _MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0 IOMUX_PAD(0x608, 0x288, 7, 0x0, 0, 0) +#define _MX53_PAD_PATA_IORDY__PATA_IORDY IOMUX_PAD(0x60C, 0x28C, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_IORDY__GPIO7_5 IOMUX_PAD(0x60C, 0x28C, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_IORDY__ESDHC3_CLK IOMUX_PAD(0x60C, 0x28C, 2, 0x0, 0, 0) +#define _MX53_PAD_PATA_IORDY__UART1_RTS IOMUX_PAD(0x60C, 0x28C, 3, 0x874, 3, 0) +#define _MX53_PAD_PATA_IORDY__CAN2_RXCAN IOMUX_PAD(0x60C, 0x28C, 4, 0x764, 1, 0) +#define _MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1 IOMUX_PAD(0x60C, 0x28C, 7, 0x0, 0, 0) +#define _MX53_PAD_PATA_DA_0__PATA_DA_0 IOMUX_PAD(0x610, 0x290, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DA_0__GPIO7_6 IOMUX_PAD(0x610, 0x290, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DA_0__ESDHC3_RST IOMUX_PAD(0x610, 0x290, 2, 0x0, 0, 0) +#define _MX53_PAD_PATA_DA_0__OWIRE_LINE IOMUX_PAD(0x610, 0x290, 4, 0x864, 0, 0) +#define _MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2 IOMUX_PAD(0x610, 0x290, 7, 0x0, 0, 0) +#define _MX53_PAD_PATA_DA_1__PATA_DA_1 IOMUX_PAD(0x614, 0x294, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DA_1__GPIO7_7 IOMUX_PAD(0x614, 0x294, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DA_1__ESDHC4_CMD IOMUX_PAD(0x614, 0x294, 2, 0x0, 0, 0) +#define _MX53_PAD_PATA_DA_1__UART3_CTS IOMUX_PAD(0x614, 0x294, 4, 0x884, 4, 0) +#define _MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3 IOMUX_PAD(0x614, 0x294, 7, 0x0, 0, 0) +#define _MX53_PAD_PATA_DA_2__PATA_DA_2 IOMUX_PAD(0x618, 0x298, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DA_2__GPIO7_8 IOMUX_PAD(0x618, 0x298, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DA_2__ESDHC4_CLK IOMUX_PAD(0x618, 0x298, 2, 0x0, 0, 0) +#define _MX53_PAD_PATA_DA_2__UART3_RTS IOMUX_PAD(0x618, 0x298, 4, 0x884, 5, 0) +#define _MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4 IOMUX_PAD(0x618, 0x298, 7, 0x0, 0, 0) +#define _MX53_PAD_PATA_CS_0__PATA_CS_0 IOMUX_PAD(0x61C, 0x29C, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_CS_0__GPIO7_9 IOMUX_PAD(0x61C, 0x29C, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_CS_0__UART3_TXD_MUX IOMUX_PAD(0x61C, 0x29C, 4, 0x888, 2, 0) +#define _MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5 IOMUX_PAD(0x61C, 0x29C, 7, 0x0, 0, 0) +#define _MX53_PAD_PATA_CS_1__PATA_CS_1 IOMUX_PAD(0x620, 0x2A0, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_CS_1__GPIO7_10 IOMUX_PAD(0x620, 0x2A0, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_CS_1__UART3_RXD_MUX IOMUX_PAD(0x620, 0x2A0, 4, 0x888, 3, 0) +#define _MX53_PAD_PATA_CS_1__USBPHY1_DATAOUT_6 IOMUX_PAD(0x620, 0x2A0, 7, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA0__PATA_DATA_0 IOMUX_PAD(0x628, 0x2A4, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA0__GPIO2_0 IOMUX_PAD(0x628, 0x2A4, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 IOMUX_PAD(0x628, 0x2A4, 3, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA0__ESDHC3_DAT4 IOMUX_PAD(0x628, 0x2A4, 4, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0 IOMUX_PAD(0x628, 0x2A4, 5, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0 IOMUX_PAD(0x628, 0x2A4, 6, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7 IOMUX_PAD(0x628, 0x2A4, 7, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA1__PATA_DATA_1 IOMUX_PAD(0x62C, 0x2A8, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA1__GPIO2_1 IOMUX_PAD(0x62C, 0x2A8, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 IOMUX_PAD(0x62C, 0x2A8, 3, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA1__ESDHC3_DAT5 IOMUX_PAD(0x62C, 0x2A8, 4, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1 IOMUX_PAD(0x62C, 0x2A8, 5, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1 IOMUX_PAD(0x62C, 0x2A8, 6, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA2__PATA_DATA_2 IOMUX_PAD(0x630, 0x2AC, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA2__GPIO2_2 IOMUX_PAD(0x630, 0x2AC, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 IOMUX_PAD(0x630, 0x2AC, 3, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA2__ESDHC3_DAT6 IOMUX_PAD(0x630, 0x2AC, 4, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2 IOMUX_PAD(0x630, 0x2AC, 5, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2 IOMUX_PAD(0x630, 0x2AC, 6, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA3__PATA_DATA_3 IOMUX_PAD(0x634, 0x2B0, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA3__GPIO2_3 IOMUX_PAD(0x634, 0x2B0, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 IOMUX_PAD(0x634, 0x2B0, 3, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA3__ESDHC3_DAT7 IOMUX_PAD(0x634, 0x2B0, 4, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3 IOMUX_PAD(0x634, 0x2B0, 5, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3 IOMUX_PAD(0x634, 0x2B0, 6, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA4__PATA_DATA_4 IOMUX_PAD(0x638, 0x2B4, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA4__GPIO2_4 IOMUX_PAD(0x638, 0x2B4, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 IOMUX_PAD(0x638, 0x2B4, 3, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA4__ESDHC4_DAT4 IOMUX_PAD(0x638, 0x2B4, 4, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4 IOMUX_PAD(0x638, 0x2B4, 5, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4 IOMUX_PAD(0x638, 0x2B4, 6, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA5__PATA_DATA_5 IOMUX_PAD(0x63C, 0x2B8, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA5__GPIO2_5 IOMUX_PAD(0x63C, 0x2B8, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 IOMUX_PAD(0x63C, 0x2B8, 3, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA5__ESDHC4_DAT5 IOMUX_PAD(0x63C, 0x2B8, 4, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5 IOMUX_PAD(0x63C, 0x2B8, 5, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5 IOMUX_PAD(0x63C, 0x2B8, 6, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA6__PATA_DATA_6 IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA6__GPIO2_6 IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA6__ESDHC4_DAT6 IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6 IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6 IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA7__PATA_DATA_7 IOMUX_PAD(0x644, 0x2C0, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA7__GPIO2_7 IOMUX_PAD(0x644, 0x2C0, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 IOMUX_PAD(0x644, 0x2C0, 3, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA7__ESDHC4_DAT7 IOMUX_PAD(0x644, 0x2C0, 4, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7 IOMUX_PAD(0x644, 0x2C0, 5, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7 IOMUX_PAD(0x644, 0x2C0, 6, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA8__PATA_DATA_8 IOMUX_PAD(0x648, 0x2C4, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA8__GPIO2_8 IOMUX_PAD(0x648, 0x2C4, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA8__ESDHC1_DAT4 IOMUX_PAD(0x648, 0x2C4, 2, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA8__EMI_NANDF_D_8 IOMUX_PAD(0x648, 0x2C4, 3, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA8__ESDHC3_DAT0 IOMUX_PAD(0x648, 0x2C4, 4, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8 IOMUX_PAD(0x648, 0x2C4, 5, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8 IOMUX_PAD(0x648, 0x2C4, 6, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA9__PATA_DATA_9 IOMUX_PAD(0x64C, 0x2C8, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA9__GPIO2_9 IOMUX_PAD(0x64C, 0x2C8, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA9__ESDHC1_DAT5 IOMUX_PAD(0x64C, 0x2C8, 2, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA9__EMI_NANDF_D_9 IOMUX_PAD(0x64C, 0x2C8, 3, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA9__ESDHC3_DAT1 IOMUX_PAD(0x64C, 0x2C8, 4, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9 IOMUX_PAD(0x64C, 0x2C8, 5, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9 IOMUX_PAD(0x64C, 0x2C8, 6, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA10__PATA_DATA_10 IOMUX_PAD(0x650, 0x2CC, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA10__GPIO2_10 IOMUX_PAD(0x650, 0x2CC, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA10__ESDHC1_DAT6 IOMUX_PAD(0x650, 0x2CC, 2, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA10__EMI_NANDF_D_10 IOMUX_PAD(0x650, 0x2CC, 3, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA10__ESDHC3_DAT2 IOMUX_PAD(0x650, 0x2CC, 4, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10 IOMUX_PAD(0x650, 0x2CC, 5, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10 IOMUX_PAD(0x650, 0x2CC, 6, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA11__PATA_DATA_11 IOMUX_PAD(0x654, 0x2D0, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA11__GPIO2_11 IOMUX_PAD(0x654, 0x2D0, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA11__ESDHC1_DAT7 IOMUX_PAD(0x654, 0x2D0, 2, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA11__EMI_NANDF_D_11 IOMUX_PAD(0x654, 0x2D0, 3, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA11__ESDHC3_DAT3 IOMUX_PAD(0x654, 0x2D0, 4, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11 IOMUX_PAD(0x654, 0x2D0, 5, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11 IOMUX_PAD(0x654, 0x2D0, 6, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA12__PATA_DATA_12 IOMUX_PAD(0x658, 0x2D4, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA12__GPIO2_12 IOMUX_PAD(0x658, 0x2D4, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA12__ESDHC2_DAT4 IOMUX_PAD(0x658, 0x2D4, 2, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA12__EMI_NANDF_D_12 IOMUX_PAD(0x658, 0x2D4, 3, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA12__ESDHC4_DAT0 IOMUX_PAD(0x658, 0x2D4, 4, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12 IOMUX_PAD(0x658, 0x2D4, 5, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12 IOMUX_PAD(0x658, 0x2D4, 6, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA13__PATA_DATA_13 IOMUX_PAD(0x65C, 0x2D8, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA13__GPIO2_13 IOMUX_PAD(0x65C, 0x2D8, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA13__ESDHC2_DAT5 IOMUX_PAD(0x65C, 0x2D8, 2, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA13__EMI_NANDF_D_13 IOMUX_PAD(0x65C, 0x2D8, 3, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA13__ESDHC4_DAT1 IOMUX_PAD(0x65C, 0x2D8, 4, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13 IOMUX_PAD(0x65C, 0x2D8, 5, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13 IOMUX_PAD(0x65C, 0x2D8, 6, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA14__PATA_DATA_14 IOMUX_PAD(0x660, 0x2DC, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA14__GPIO2_14 IOMUX_PAD(0x660, 0x2DC, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA14__ESDHC2_DAT6 IOMUX_PAD(0x660, 0x2DC, 2, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA14__EMI_NANDF_D_14 IOMUX_PAD(0x660, 0x2DC, 3, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA14__ESDHC4_DAT2 IOMUX_PAD(0x660, 0x2DC, 4, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14 IOMUX_PAD(0x660, 0x2DC, 5, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14 IOMUX_PAD(0x660, 0x2DC, 6, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA15__PATA_DATA_15 IOMUX_PAD(0x664, 0x2E0, 0, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA15__GPIO2_15 IOMUX_PAD(0x664, 0x2E0, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA15__ESDHC2_DAT7 IOMUX_PAD(0x664, 0x2E0, 2, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA15__EMI_NANDF_D_15 IOMUX_PAD(0x664, 0x2E0, 3, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA15__ESDHC4_DAT3 IOMUX_PAD(0x664, 0x2E0, 4, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15 IOMUX_PAD(0x664, 0x2E0, 5, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15 IOMUX_PAD(0x664, 0x2E0, 6, 0x0, 0, 0) +#define _MX53_PAD_SD1_DATA0__ESDHC1_DAT0 IOMUX_PAD(0x66C, 0x2E4, 0, 0x0, 0, 0) +#define _MX53_PAD_SD1_DATA0__GPIO1_16 IOMUX_PAD(0x66C, 0x2E4, 1, 0x0, 0, 0) +#define _MX53_PAD_SD1_DATA0__GPT_CAPIN1 IOMUX_PAD(0x66C, 0x2E4, 3, 0x0, 0, 0) +#define _MX53_PAD_SD1_DATA0__CSPI_MISO IOMUX_PAD(0x66C, 0x2E4, 5, 0x784, 2, 0) +#define _MX53_PAD_SD1_DATA0__CCM_PLL3_BYP IOMUX_PAD(0x66C, 0x2E4, 7, 0x778, 0, 0) +#define _MX53_PAD_SD1_DATA1__ESDHC1_DAT1 IOMUX_PAD(0x670, 0x2E8, 0, 0x0, 0, 0) +#define _MX53_PAD_SD1_DATA1__GPIO1_17 IOMUX_PAD(0x670, 0x2E8, 1, 0x0, 0, 0) +#define _MX53_PAD_SD1_DATA1__GPT_CAPIN2 IOMUX_PAD(0x670, 0x2E8, 3, 0x0, 0, 0) +#define _MX53_PAD_SD1_DATA1__CSPI_SS0 IOMUX_PAD(0x670, 0x2E8, 5, 0x78C, 3, 0) +#define _MX53_PAD_SD1_DATA1__CCM_PLL4_BYP IOMUX_PAD(0x670, 0x2E8, 7, 0x77C, 1, 0) +#define _MX53_PAD_SD1_CMD__ESDHC1_CMD IOMUX_PAD(0x674, 0x2EC, IOMUX_CONFIG_SION, 0x0, 0, 0) +#define _MX53_PAD_SD1_CMD__GPIO1_18 IOMUX_PAD(0x674, 0x2EC, 1, 0x0, 0, 0) +#define _MX53_PAD_SD1_CMD__GPT_CMPOUT1 IOMUX_PAD(0x674, 0x2EC, 3, 0x0, 0, 0) +#define _MX53_PAD_SD1_CMD__CSPI_MOSI IOMUX_PAD(0x674, 0x2EC, 5, 0x788, 2, 0) +#define _MX53_PAD_SD1_CMD__CCM_PLL1_BYP IOMUX_PAD(0x674, 0x2EC, 7, 0x770, 0, 0) +#define _MX53_PAD_SD1_DATA2__ESDHC1_DAT2 IOMUX_PAD(0x678, 0x2F0, 0, 0x0, 0, 0) +#define _MX53_PAD_SD1_DATA2__GPIO1_19 IOMUX_PAD(0x678, 0x2F0, 1, 0x0, 0, 0) +#define _MX53_PAD_SD1_DATA2__GPT_CMPOUT2 IOMUX_PAD(0x678, 0x2F0, 2, 0x0, 0, 0) +#define _MX53_PAD_SD1_DATA2__PWM2_PWMO IOMUX_PAD(0x678, 0x2F0, 3, 0x0, 0, 0) +#define _MX53_PAD_SD1_DATA2__WDOG1_WDOG_B IOMUX_PAD(0x678, 0x2F0, 4, 0x0, 0, 0) +#define _MX53_PAD_SD1_DATA2__CSPI_SS1 IOMUX_PAD(0x678, 0x2F0, 5, 0x790, 2, 0) +#define _MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB IOMUX_PAD(0x678, 0x2F0, 6, 0x0, 0, 0) +#define _MX53_PAD_SD1_DATA2__CCM_PLL2_BYP IOMUX_PAD(0x678, 0x2F0, 7, 0x774, 0, 0) +#define _MX53_PAD_SD1_CLK__ESDHC1_CLK IOMUX_PAD(0x67C, 0x2F4, 0, 0x0, 0, 0) +#define _MX53_PAD_SD1_CLK__GPIO1_20 IOMUX_PAD(0x67C, 0x2F4, 1, 0x0, 0, 0) +#define _MX53_PAD_SD1_CLK__OSC32k_32K_OUT IOMUX_PAD(0x67C, 0x2F4, 2, 0x0, 0, 0) +#define _MX53_PAD_SD1_CLK__GPT_CLKIN IOMUX_PAD(0x67C, 0x2F4, 3, 0x0, 0, 0) +#define _MX53_PAD_SD1_CLK__CSPI_SCLK IOMUX_PAD(0x67C, 0x2F4, 5, 0x780, 2, 0) +#define _MX53_PAD_SD1_CLK__SATA_PHY_DTB_0 IOMUX_PAD(0x67C, 0x2F4, 7, 0x0, 0, 0) +#define _MX53_PAD_SD1_DATA3__ESDHC1_DAT3 IOMUX_PAD(0x680, 0x2F8, 0, 0x0, 0, 0) +#define _MX53_PAD_SD1_DATA3__GPIO1_21 IOMUX_PAD(0x680, 0x2F8, 1, 0x0, 0, 0) +#define _MX53_PAD_SD1_DATA3__GPT_CMPOUT3 IOMUX_PAD(0x680, 0x2F8, 2, 0x0, 0, 0) +#define _MX53_PAD_SD1_DATA3__PWM1_PWMO IOMUX_PAD(0x680, 0x2F8, 3, 0x0, 0, 0) +#define _MX53_PAD_SD1_DATA3__WDOG2_WDOG_B IOMUX_PAD(0x680, 0x2F8, 4, 0x0, 0, 0) +#define _MX53_PAD_SD1_DATA3__CSPI_SS2 IOMUX_PAD(0x680, 0x2F8, 5, 0x794, 2, 0) +#define _MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB IOMUX_PAD(0x680, 0x2F8, 6, 0x0, 0, 0) +#define _MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1 IOMUX_PAD(0x680, 0x2F8, 7, 0x0, 0, 0) +#define _MX53_PAD_SD2_CLK__ESDHC2_CLK IOMUX_PAD(0x688, 0x2FC, 0, 0x0, 0, 0) +#define _MX53_PAD_SD2_CLK__GPIO1_10 IOMUX_PAD(0x688, 0x2FC, 1, 0x0, 0, 0) +#define _MX53_PAD_SD2_CLK__KPP_COL_5 IOMUX_PAD(0x688, 0x2FC, 2, 0x840, 2, 0) +#define _MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS IOMUX_PAD(0x688, 0x2FC, 3, 0x73C, 1, 0) +#define _MX53_PAD_SD2_CLK__CSPI_SCLK IOMUX_PAD(0x688, 0x2FC, 5, 0x780, 3, 0) +#define _MX53_PAD_SD2_CLK__SCC_RANDOM_V IOMUX_PAD(0x688, 0x2FC, 7, 0x0, 0, 0) +#define _MX53_PAD_SD2_CMD__ESDHC2_CMD IOMUX_PAD(0x68C, 0x300, 0, 0x0, 0, 0) +#define _MX53_PAD_SD2_CMD__GPIO1_11 IOMUX_PAD(0x68C, 0x300, 1, 0x0, 0, 0) +#define _MX53_PAD_SD2_CMD__KPP_ROW_5 IOMUX_PAD(0x68C, 0x300, 2, 0x84C, 1, 0) +#define _MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC IOMUX_PAD(0x68C, 0x300, 3, 0x738, 1, 0) +#define _MX53_PAD_SD2_CMD__CSPI_MOSI IOMUX_PAD(0x68C, 0x300, 5, 0x788, 3, 0) +#define _MX53_PAD_SD2_CMD__SCC_RANDOM IOMUX_PAD(0x68C, 0x300, 7, 0x0, 0, 0) +#define _MX53_PAD_SD2_DATA3__ESDHC2_DAT3 IOMUX_PAD(0x690, 0x304, 0, 0x0, 0, 0) +#define _MX53_PAD_SD2_DATA3__GPIO1_12 IOMUX_PAD(0x690, 0x304, 1, 0x0, 0, 0) +#define _MX53_PAD_SD2_DATA3__KPP_COL_6 IOMUX_PAD(0x690, 0x304, 2, 0x844, 1, 0) +#define _MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC IOMUX_PAD(0x690, 0x304, 3, 0x740, 1, 0) +#define _MX53_PAD_SD2_DATA3__CSPI_SS2 IOMUX_PAD(0x690, 0x304, 5, 0x794, 3, 0) +#define _MX53_PAD_SD2_DATA3__SJC_DONE IOMUX_PAD(0x690, 0x304, 7, 0x0, 0, 0) +#define _MX53_PAD_SD2_DATA2__ESDHC2_DAT2 IOMUX_PAD(0x694, 0x308, 0, 0x0, 0, 0) +#define _MX53_PAD_SD2_DATA2__GPIO1_13 IOMUX_PAD(0x694, 0x308, 1, 0x0, 0, 0) +#define _MX53_PAD_SD2_DATA2__KPP_ROW_6 IOMUX_PAD(0x694, 0x308, 2, 0x850, 1, 0) +#define _MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD IOMUX_PAD(0x694, 0x308, 3, 0x734, 1, 0) +#define _MX53_PAD_SD2_DATA2__CSPI_SS1 IOMUX_PAD(0x694, 0x308, 5, 0x790, 3, 0) +#define _MX53_PAD_SD2_DATA2__SJC_FAIL IOMUX_PAD(0x694, 0x308, 7, 0x0, 0, 0) +#define _MX53_PAD_SD2_DATA1__ESDHC2_DAT1 IOMUX_PAD(0x698, 0x30C, 0, 0x0, 0, 0) +#define _MX53_PAD_SD2_DATA1__GPIO1_14 IOMUX_PAD(0x698, 0x30C, 1, 0x0, 0, 0) +#define _MX53_PAD_SD2_DATA1__KPP_COL_7 IOMUX_PAD(0x698, 0x30C, 2, 0x848, 1, 0) +#define _MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS IOMUX_PAD(0x698, 0x30C, 3, 0x744, 0, 0) +#define _MX53_PAD_SD2_DATA1__CSPI_SS0 IOMUX_PAD(0x698, 0x30C, 5, 0x78C, 4, 0) +#define _MX53_PAD_SD2_DATA1__RTIC_SEC_VIO IOMUX_PAD(0x698, 0x30C, 7, 0x0, 0, 0) +#define _MX53_PAD_SD2_DATA0__ESDHC2_DAT0 IOMUX_PAD(0x69C, 0x310, 0, 0x0, 0, 0) +#define _MX53_PAD_SD2_DATA0__GPIO1_15 IOMUX_PAD(0x69C, 0x310, 1, 0x0, 0, 0) +#define _MX53_PAD_SD2_DATA0__KPP_ROW_7 IOMUX_PAD(0x69C, 0x310, 2, 0x854, 1, 0) +#define _MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD IOMUX_PAD(0x69C, 0x310, 3, 0x730, 1, 0) +#define _MX53_PAD_SD2_DATA0__CSPI_MISO IOMUX_PAD(0x69C, 0x310, 5, 0x784, 3, 0) +#define _MX53_PAD_SD2_DATA0__RTIC_DONE_INT IOMUX_PAD(0x69C, 0x310, 7, 0x0, 0, 0) +#define _MX53_PAD_GPIO_0__CCM_CLKO IOMUX_PAD(0x6A4, 0x314, 0, 0x0, 0, 0) +#define _MX53_PAD_GPIO_0__GPIO1_0 IOMUX_PAD(0x6A4, 0x314, 1, 0x0, 0, 0) +#define _MX53_PAD_GPIO_0__KPP_COL_5 IOMUX_PAD(0x6A4, 0x314, 2, 0x840, 3, 0) +#define _MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK IOMUX_PAD(0x6A4, 0x314, 3, 0x0, 0, 0) +#define _MX53_PAD_GPIO_0__EPIT1_EPITO IOMUX_PAD(0x6A4, 0x314, 4, 0x0, 0, 0) +#define _MX53_PAD_GPIO_0__SRTC_ALARM_DEB IOMUX_PAD(0x6A4, 0x314, 5, 0x0, 0, 0) +#define _MX53_PAD_GPIO_0__USBOH3_USBH1_PWR IOMUX_PAD(0x6A4, 0x314, 6, 0x0, 0, 0) +#define _MX53_PAD_GPIO_0__CSU_TD IOMUX_PAD(0x6A4, 0x314, 7, 0x0, 0, 0) +#define _MX53_PAD_GPIO_1__ESAI1_SCKR IOMUX_PAD(0x6A8, 0x318, 0, 0x7DC, 1, 0) +#define _MX53_PAD_GPIO_1__GPIO1_1 IOMUX_PAD(0x6A8, 0x318, 1, 0x0, 0, 0) +#define _MX53_PAD_GPIO_1__KPP_ROW_5 IOMUX_PAD(0x6A8, 0x318, 2, 0x84C, 2, 0) +#define _MX53_PAD_GPIO_1__CCM_SSI_EXT2_CLK IOMUX_PAD(0x6A8, 0x318, 3, 0x0, 0, 0) +#define _MX53_PAD_GPIO_1__PWM2_PWMO IOMUX_PAD(0x6A8, 0x318, 4, 0x0, 0, 0) +#define _MX53_PAD_GPIO_1__WDOG2_WDOG_B IOMUX_PAD(0x6A8, 0x318, 5, 0x0, 0, 0) +#define _MX53_PAD_GPIO_1__ESDHC1_CD IOMUX_PAD(0x6A8, 0x318, 6, 0x0, 0, 0) +#define _MX53_PAD_GPIO_1__SRC_TESTER_ACK IOMUX_PAD(0x6A8, 0x318, 7, 0x0, 0, 0) +#define _MX53_PAD_GPIO_9__ESAI1_FSR IOMUX_PAD(0x6AC, 0x31C, 0, 0x7CC, 1, 0) +#define _MX53_PAD_GPIO_9__GPIO1_9 IOMUX_PAD(0x6AC, 0x31C, 1, 0x0, 0, 0) +#define _MX53_PAD_GPIO_9__KPP_COL_6 IOMUX_PAD(0x6AC, 0x31C, 2, 0x844, 2, 0) +#define _MX53_PAD_GPIO_9__CCM_REF_EN_B IOMUX_PAD(0x6AC, 0x31C, 3, 0x0, 0, 0) +#define _MX53_PAD_GPIO_9__PWM1_PWMO IOMUX_PAD(0x6AC, 0x31C, 4, 0x0, 0, 0) +#define _MX53_PAD_GPIO_9__WDOG1_WDOG_B IOMUX_PAD(0x6AC, 0x31C, 5, 0x0, 0, 0) +#define _MX53_PAD_GPIO_9__ESDHC1_WP IOMUX_PAD(0x6AC, 0x31C, 6, 0x7FC, 1, 0) +#define _MX53_PAD_GPIO_9__SCC_FAIL_STATE IOMUX_PAD(0x6AC, 0x31C, 7, 0x0, 0, 0) +#define _MX53_PAD_GPIO_3__ESAI1_HCKR IOMUX_PAD(0x6B0, 0x320, 0, 0x7D4, 1, 0) +#define _MX53_PAD_GPIO_3__GPIO1_3 IOMUX_PAD(0x6B0, 0x320, 1, 0x0, 0, 0) +#define _MX53_PAD_GPIO_3__I2C3_SCL IOMUX_PAD(0x6B0, 0x320, 2 | IOMUX_CONFIG_SION, 0x824, 1, 0) +#define _MX53_PAD_GPIO_3__DPLLIP1_TOG_EN IOMUX_PAD(0x6B0, 0x320, 3, 0x0, 0, 0) +#define _MX53_PAD_GPIO_3__CCM_CLKO2 IOMUX_PAD(0x6B0, 0x320, 4, 0x0, 0, 0) +#define _MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 IOMUX_PAD(0x6B0, 0x320, 5, 0x0, 0, 0) +#define _MX53_PAD_GPIO_3__USBOH3_USBH1_OC IOMUX_PAD(0x6B0, 0x320, 6, 0x8A0, 1, 0) +#define _MX53_PAD_GPIO_3__MLB_MLBCLK IOMUX_PAD(0x6B0, 0x320, 7, 0x858, 2, 0) +#define _MX53_PAD_GPIO_6__ESAI1_SCKT IOMUX_PAD(0x6B4, 0x324, 0, 0x7E0, 1, 0) +#define _MX53_PAD_GPIO_6__GPIO1_6 IOMUX_PAD(0x6B4, 0x324, 1, 0x0, 0, 0) +#define _MX53_PAD_GPIO_6__I2C3_SDA IOMUX_PAD(0x6B4, 0x324, 2 | IOMUX_CONFIG_SION, 0x828, 1, 0) +#define _MX53_PAD_GPIO_6__CCM_CCM_OUT_0 IOMUX_PAD(0x6B4, 0x324, 3, 0x0, 0, 0) +#define _MX53_PAD_GPIO_6__CSU_CSU_INT_DEB IOMUX_PAD(0x6B4, 0x324, 4, 0x0, 0, 0) +#define _MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 IOMUX_PAD(0x6B4, 0x324, 5, 0x0, 0, 0) +#define _MX53_PAD_GPIO_6__ESDHC2_LCTL IOMUX_PAD(0x6B4, 0x324, 6, 0x0, 0, 0) +#define _MX53_PAD_GPIO_6__MLB_MLBSIG IOMUX_PAD(0x6B4, 0x324, 7, 0x860, 2, 0) +#define _MX53_PAD_GPIO_2__ESAI1_FST IOMUX_PAD(0x6B8, 0x328, 0, 0x7D0, 1, 0) +#define _MX53_PAD_GPIO_2__GPIO1_2 IOMUX_PAD(0x6B8, 0x328, 1, 0x0, 0, 0) +#define _MX53_PAD_GPIO_2__KPP_ROW_6 IOMUX_PAD(0x6B8, 0x328, 2, 0x850, 2, 0) +#define _MX53_PAD_GPIO_2__CCM_CCM_OUT_1 IOMUX_PAD(0x6B8, 0x328, 3, 0x0, 0, 0) +#define _MX53_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0 IOMUX_PAD(0x6B8, 0x328, 4, 0x0, 0, 0) +#define _MX53_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2 IOMUX_PAD(0x6B8, 0x328, 5, 0x0, 0, 0) +#define _MX53_PAD_GPIO_2__ESDHC2_WP IOMUX_PAD(0x6B8, 0x328, 6, 0x0, 0, 0) +#define _MX53_PAD_GPIO_2__MLB_MLBDAT IOMUX_PAD(0x6B8, 0x328, 7, 0x85C, 2, 0) +#define _MX53_PAD_GPIO_4__ESAI1_HCKT IOMUX_PAD(0x6BC, 0x32C, 0, 0x7D8, 1, 0) +#define _MX53_PAD_GPIO_4__GPIO1_4 IOMUX_PAD(0x6BC, 0x32C, 1, 0x0, 0, 0) +#define _MX53_PAD_GPIO_4__KPP_COL_7 IOMUX_PAD(0x6BC, 0x32C, 2, 0x848, 2, 0) +#define _MX53_PAD_GPIO_4__CCM_CCM_OUT_2 IOMUX_PAD(0x6BC, 0x32C, 3, 0x0, 0, 0) +#define _MX53_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1 IOMUX_PAD(0x6BC, 0x32C, 4, 0x0, 0, 0) +#define _MX53_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3 IOMUX_PAD(0x6BC, 0x32C, 5, 0x0, 0, 0) +#define _MX53_PAD_GPIO_4__ESDHC2_CD IOMUX_PAD(0x6BC, 0x32C, 6, 0x0, 0, 0) +#define _MX53_PAD_GPIO_4__SCC_SEC_STATE IOMUX_PAD(0x6BC, 0x32C, 7, 0x0, 0, 0) +#define _MX53_PAD_GPIO_5__ESAI1_TX2_RX3 IOMUX_PAD(0x6C0, 0x330, 0, 0x7EC, 1, 0) +#define _MX53_PAD_GPIO_5__GPIO1_5 IOMUX_PAD(0x6C0, 0x330, 1, 0x0, 0, 0) +#define _MX53_PAD_GPIO_5__KPP_ROW_7 IOMUX_PAD(0x6C0, 0x330, 2, 0x854, 2, 0) +#define _MX53_PAD_GPIO_5__CCM_CLKO IOMUX_PAD(0x6C0, 0x330, 3, 0x0, 0, 0) +#define _MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 IOMUX_PAD(0x6C0, 0x330, 4, 0x0, 0, 0) +#define _MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 IOMUX_PAD(0x6C0, 0x330, 5, 0x0, 0, 0) +#define _MX53_PAD_GPIO_5__I2C3_SCL IOMUX_PAD(0x6C0, 0x330, 6, 0x824, 2, 0) +#define _MX53_PAD_GPIO_5__CCM_PLL1_BYP IOMUX_PAD(0x6C0, 0x330, 7, 0x770, 1, 0) +#define _MX53_PAD_GPIO_7__ESAI1_TX4_RX1 IOMUX_PAD(0x6C4, 0x334, 0, 0x7F4, 1, 0) +#define _MX53_PAD_GPIO_7__GPIO1_7 IOMUX_PAD(0x6C4, 0x334, 1, 0x0, 0, 0) +#define _MX53_PAD_GPIO_7__EPIT1_EPITO IOMUX_PAD(0x6C4, 0x334, 2, 0x0, 0, 0) +#define _MX53_PAD_GPIO_7__CAN1_TXCAN IOMUX_PAD(0x6C4, 0x334, 3, 0x0, 0, 0) +#define _MX53_PAD_GPIO_7__UART2_TXD_MUX IOMUX_PAD(0x6C4, 0x334, 4, 0x880, 4, 0) +#define _MX53_PAD_GPIO_7__FIRI_RXD IOMUX_PAD(0x6C4, 0x334, 5, 0x80C, 1, 0) +#define _MX53_PAD_GPIO_7__SPDIF_PLOCK IOMUX_PAD(0x6C4, 0x334, 6, 0x0, 0, 0) +#define _MX53_PAD_GPIO_7__CCM_PLL2_BYP IOMUX_PAD(0x6C4, 0x334, 7, 0x774, 1, 0) +#define _MX53_PAD_GPIO_8__ESAI1_TX5_RX0 IOMUX_PAD(0x6C8, 0x338, 0, 0x7F8, 1, 0) +#define _MX53_PAD_GPIO_8__GPIO1_8 IOMUX_PAD(0x6C8, 0x338, 1, 0x0, 0, 0) +#define _MX53_PAD_GPIO_8__EPIT2_EPITO IOMUX_PAD(0x6C8, 0x338, 2, 0x0, 0, 0) +#define _MX53_PAD_GPIO_8__CAN1_RXCAN IOMUX_PAD(0x6C8, 0x338, 3, 0x760, 3, 0) +#define _MX53_PAD_GPIO_8__UART2_RXD_MUX IOMUX_PAD(0x6C8, 0x338, 4, 0x880, 5, 0) +#define _MX53_PAD_GPIO_8__FIRI_TXD IOMUX_PAD(0x6C8, 0x338, 5, 0x0, 0, 0) +#define _MX53_PAD_GPIO_8__SPDIF_SRCLK IOMUX_PAD(0x6C8, 0x338, 6, 0x0, 0, 0) +#define _MX53_PAD_GPIO_8__CCM_PLL3_BYP IOMUX_PAD(0x6C8, 0x338, 7, 0x778, 1, 0) +#define _MX53_PAD_GPIO_16__ESAI1_TX3_RX2 IOMUX_PAD(0x6CC, 0x33C, 0, 0x7F0, 1, 0) +#define _MX53_PAD_GPIO_16__GPIO7_11 IOMUX_PAD(0x6CC, 0x33C, 1, 0x0, 0, 0) +#define _MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT IOMUX_PAD(0x6CC, 0x33C, 2, 0x0, 0, 0) +#define _MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 IOMUX_PAD(0x6CC, 0x33C, 4, 0x0, 0, 0) +#define _MX53_PAD_GPIO_16__SPDIF_IN1 IOMUX_PAD(0x6CC, 0x33C, 5, 0x870, 1, 0) +#define _MX53_PAD_GPIO_16__I2C3_SDA IOMUX_PAD(0x6CC, 0x33C, 6 | IOMUX_CONFIG_SION, 0x828, 2, 0) +#define _MX53_PAD_GPIO_16__SJC_DE_B IOMUX_PAD(0x6CC, 0x33C, 7, 0x0, 0, 0) +#define _MX53_PAD_GPIO_17__ESAI1_TX0 IOMUX_PAD(0x6D0, 0x340, 0, 0x7E4, 1, 0) +#define _MX53_PAD_GPIO_17__GPIO7_12 IOMUX_PAD(0x6D0, 0x340, 1, 0x0, 0, 0) +#define _MX53_PAD_GPIO_17__SDMA_EXT_EVENT_0 IOMUX_PAD(0x6D0, 0x340, 2, 0x868, 1, 0) +#define _MX53_PAD_GPIO_17__GPC_PMIC_RDY IOMUX_PAD(0x6D0, 0x340, 3, 0x810, 1, 0) +#define _MX53_PAD_GPIO_17__RTC_CE_RTC_FSV_TRIG IOMUX_PAD(0x6D0, 0x340, 4, 0x0, 0, 0) +#define _MX53_PAD_GPIO_17__SPDIF_OUT1 IOMUX_PAD(0x6D0, 0x340, 5, 0x0, 0, 0) +#define _MX53_PAD_GPIO_17__IPU_SNOOP2 IOMUX_PAD(0x6D0, 0x340, 6, 0x0, 0, 0) +#define _MX53_PAD_GPIO_17__SJC_JTAG_ACT IOMUX_PAD(0x6D0, 0x340, 7, 0x0, 0, 0) +#define _MX53_PAD_GPIO_18__ESAI1_TX1 IOMUX_PAD(0x6D4, 0x344, 0, 0x7E8, 1, 0) +#define _MX53_PAD_GPIO_18__GPIO7_13 IOMUX_PAD(0x6D4, 0x344, 1, 0x0, 0, 0) +#define _MX53_PAD_GPIO_18__SDMA_EXT_EVENT_1 IOMUX_PAD(0x6D4, 0x344, 2, 0x86C, 1, 0) +#define _MX53_PAD_GPIO_18__OWIRE_LINE IOMUX_PAD(0x6D4, 0x344, 3, 0x864, 1, 0) +#define _MX53_PAD_GPIO_18__RTC_CE_RTC_ALARM2_TRIG IOMUX_PAD(0x6D4, 0x344, 4, 0x0, 0, 0) +#define _MX53_PAD_GPIO_18__CCM_ASRC_EXT_CLK IOMUX_PAD(0x6D4, 0x344, 5, 0x768, 1, 0) +#define _MX53_PAD_GPIO_18__ESDHC1_LCTL IOMUX_PAD(0x6D4, 0x344, 6, 0x0, 0, 0) +#define _MX53_PAD_GPIO_18__SRC_SYSTEM_RST IOMUX_PAD(0x6D4, 0x344, 7, 0x0, 0, 0) -#define MX53_PAD_GPIO_19__GPIO_4_5 IOMUX_PAD(0x348, 0x20,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL0__GPIO_4_6 IOMUX_PAD(0x34C, 0x24,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW0__GPIO_4_7 IOMUX_PAD(0x350, 0x28,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL1__GPIO_4_8 IOMUX_PAD(0x354, 0x2C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW1__GPIO_4_9 IOMUX_PAD(0x358, 0x30,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL2__GPIO_4_10 IOMUX_PAD(0x35C, 0x34,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW2__GPIO_4_11 IOMUX_PAD(0x360, 0x38,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL3__GPIO_4_12 IOMUX_PAD(0x364, 0x3C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW3__GPIO_4_13 IOMUX_PAD(0x368, 0x40,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL4__GPIO_4_14 IOMUX_PAD(0x36C, 0x44,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW4__GPIO_4_15 IOMUX_PAD(0x370, 0x48,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NVCC_KEYPAD__NVCC_KEYPAD IOMUX_PAD(0x374, NON_MUX_I,IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_DISP_CLK__GPIO_4_16 IOMUX_PAD(0x378, 0x4C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_PIN15__GPIO_4_17 IOMUX_PAD(0x37C, 0x50,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_PIN2__GPIO_4_18 IOMUX_PAD(0x380, 0x54,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_PIN3__GPIO_4_19 IOMUX_PAD(0x384, 0x58,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_PIN4__GPIO_4_20 IOMUX_PAD(0x388, 0x5C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT0__GPIO_4_21 IOMUX_PAD(0x38C, 0x60,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT1__GPIO_4_22 IOMUX_PAD(0x390, 0x64,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT2__GPIO_4_23 IOMUX_PAD(0x394, 0x68,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT3__GPIO_4_24 IOMUX_PAD(0x398, 0x6C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT4__GPIO_4_25 IOMUX_PAD(0x39C, 0x70,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT5__GPIO_4_26 IOMUX_PAD(0x3A0, 0x74,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT6__GPIO_4_27 IOMUX_PAD(0x3A4, 0x78,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT7__GPIO_4_28 IOMUX_PAD(0x3A8, 0x7C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT8__GPIO_4_29 IOMUX_PAD(0x3AC, 0x80,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT9__GPIO_4_30 IOMUX_PAD(0x3B0, 0x84,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT10__GPIO_4_31 IOMUX_PAD(0x3B4, 0x88,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT11__GPIO_5_5 IOMUX_PAD(0x3B8, 0x8C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT12__GPIO_5_6 IOMUX_PAD(0x3BC, 0x90,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT13__GPIO_5_7 IOMUX_PAD(0x3C0, 0x94,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT14__GPIO_5_8 IOMUX_PAD(0x3C4, 0x98,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT15__GPIO_5_9 IOMUX_PAD(0x3C8, 0x9C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT16__GPIO_5_10 IOMUX_PAD(0x3CC, 0xA0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT17__GPIO_5_11 IOMUX_PAD(0x3D0, 0xA4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT18__GPIO_5_12 IOMUX_PAD(0x3D4, 0xA8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT19__GPIO_5_13 IOMUX_PAD(0x3D8, 0xAC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT20__GPIO_5_14 IOMUX_PAD(0x3DC, 0xB0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT21__GPIO_5_15 IOMUX_PAD(0x3E0, 0xB4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT22__GPIO_5_16 IOMUX_PAD(0x3E4, 0xB8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT23__GPIO_5_17 IOMUX_PAD(0x3E8, 0xBC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_PIXCLK__GPIO_5_18 IOMUX_PAD(0x3EC, 0xC0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_MCLK__GPIO_5_19 IOMUX_PAD(0x3F0, 0xC4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DATA_EN__GPIO_5_20 IOMUX_PAD(0x3F4, 0xC8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_VSYNC__GPIO_5_21 IOMUX_PAD(0x3F8, 0xCC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_D4__GPIO_5_22 IOMUX_PAD(0x3FC, 0xD0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_D5__GPIO_5_23 IOMUX_PAD(0x400, 0xD4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_D6__GPIO_5_24 IOMUX_PAD(0x404, 0xD8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_D7__GPIO_5_25 IOMUX_PAD(0x408, 0xDC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_D8__GPIO_5_26 IOMUX_PAD(0x40C, 0xE0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_D9__GPIO_5_27 IOMUX_PAD(0x410, 0xE4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_D10__GPIO_5_28 IOMUX_PAD(0x414, 0xE8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_D11__GPIO_5_29 IOMUX_PAD(0x418, 0xEC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_D12__GPIO_5_30 IOMUX_PAD(0x41C, 0xF0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_D13__GPIO_5_31 IOMUX_PAD(0x420, 0xF4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_D14__GPIO_6_0 IOMUX_PAD(0x424, 0xF8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_D15__GPIO_6_1 IOMUX_PAD(0x428, 0xFC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_D16__GPIO_6_2 IOMUX_PAD(0x42C, 0x100,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_D17__GPIO_6_3 IOMUX_PAD(0x430, 0x104,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_D18__GPIO_6_4 IOMUX_PAD(0x434, 0x108,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_D19__GPIO_6_5 IOMUX_PAD(0x438, 0x10C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NVCC_CSI0__NVCC_CSI0 IOMUX_PAD(0x43C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_JTAG_TMS__JTAG_TMS IOMUX_PAD(0x440, NON_MUX_I,IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_JTAG_MOD__JTAG_MOD IOMUX_PAD(0x444, NON_MUX_I,IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_JTAG_TRSTB__JTAG_TRSTB IOMUX_PAD(0x448, NON_MUX_I,IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_JTAG_TDI__JTAG_TDI IOMUX_PAD(0x44C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_JTAG_TCK__JTAG_TCK IOMUX_PAD(0x450, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_JTAG_TDO__JTAG_TDO IOMUX_PAD(0x454, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A25__GPIO_5_2 IOMUX_PAD(0x458, 0x110,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_EB2__GPIO_2_30 IOMUX_PAD(0x45C, 0x114,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D16__GPIO_3_16 IOMUX_PAD(0x460, 0x118,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D17__GPIO_3_17 IOMUX_PAD(0x464, 0x11C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D18__GPIO_3_18 IOMUX_PAD(0x468, 0x120,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D16__CSPI1_SCLK IOMUX_PAD(0x460, 0x118,IOMUX_CONFIG_ALT4, 0x79c, 3, NO_PAD_CTRL) -#define MX53_PAD_EIM_D17__CSPI1_MISO IOMUX_PAD(0x464, 0x11C,IOMUX_CONFIG_ALT4, 0x7a0, 3, NO_PAD_CTRL) -#define MX53_PAD_EIM_D18__CSPI1_MOSI IOMUX_PAD(0x468, 0x120,IOMUX_CONFIG_ALT4, 0x7a4, 3, NO_PAD_CTRL) -#define MX53_PAD_EIM_D19__GPIO_3_19 IOMUX_PAD(0x46C, 0x124,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D20__GPIO_3_20 IOMUX_PAD(0x470, 0x128,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D21__GPIO_3_21 IOMUX_PAD(0x474, 0x12C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D22__GPIO_3_22 IOMUX_PAD(0x478, 0x130,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D23__GPIO_3_23 IOMUX_PAD(0x47C, 0x134,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_EB3__GPIO_2_31 IOMUX_PAD(0x480, 0x138,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D24__GPIO_3_24 IOMUX_PAD(0x484, 0x13C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D25__GPIO_3_25 IOMUX_PAD(0x488, 0x140,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D26__GPIO_3_26 IOMUX_PAD(0x48C, 0x144,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D27__GPIO_3_27 IOMUX_PAD(0x490, 0x148,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D28__GPIO_3_28 IOMUX_PAD(0x494, 0x14C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D29__GPIO_3_29 IOMUX_PAD(0x498, 0x150,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D30__GPIO_3_30 IOMUX_PAD(0x49C, 0x154,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D31__GPIO_3_31 IOMUX_PAD(0x4A0, 0x158,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NVCC_EIM1__NVCC_EIM1 IOMUX_PAD(0x4A4, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A24__GPIO_5_4 IOMUX_PAD(0x4A8, 0x15C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A23__GPIO_6_6 IOMUX_PAD(0x4AC, 0x160,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A22__GPIO_2_16 IOMUX_PAD(0x4B0, 0x164,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A21__GPIO_2_17 IOMUX_PAD(0x4B4, 0x168,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A20__GPIO_2_18 IOMUX_PAD(0x4B8, 0x16C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A19__GPIO_2_19 IOMUX_PAD(0x4BC, 0x170,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A18__GPIO_2_20 IOMUX_PAD(0x4C0, 0x174,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A17__GPIO_2_21 IOMUX_PAD(0x4C4, 0x178,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A16__GPIO_2_22 IOMUX_PAD(0x4C8, 0x17C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_CS0__GPIO_2_23 IOMUX_PAD(0x4CC, 0x180,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_CS1__GPIO_2_24 IOMUX_PAD(0x4D0, 0x184,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_OE__GPIO_2_25 IOMUX_PAD(0x4D4, 0x188,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_RW__GPIO_2_26 IOMUX_PAD(0x4D8, 0x18C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_LBA__GPIO_2_27 IOMUX_PAD(0x4DC, 0x190,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NVCC_EIM4__NVCC_EIM4 IOMUX_PAD(0x4E0, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_EB0__GPIO_2_28 IOMUX_PAD(0x4E4, 0x194,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_EB1__GPIO_2_29 IOMUX_PAD(0x4E8, 0x198,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA0__GPIO_3_0 IOMUX_PAD(0x4EC, 0x19C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA1__GPIO_3_1 IOMUX_PAD(0x4F0, 0x1A0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA2__GPIO_3_2 IOMUX_PAD(0x4F4, 0x1A4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA3__GPIO_3_3 IOMUX_PAD(0x4F8, 0x1A8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA4__GPIO_3_4 IOMUX_PAD(0x4FC, 0x1AC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA5__GPIO_3_5 IOMUX_PAD(0x500, 0x1B0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA6__GPIO_3_6 IOMUX_PAD(0x504, 0x1B4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA7__GPIO_3_7 IOMUX_PAD(0x508, 0x1B8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA8__GPIO_3_8 IOMUX_PAD(0x50C, 0x1BC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA9__GPIO_3_9 IOMUX_PAD(0x510, 0x1C0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA10__GPIO_3_10 IOMUX_PAD(0x514, 0x1C4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA11__GPIO_3_11 IOMUX_PAD(0x518, 0x1C8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA12__GPIO_3_12 IOMUX_PAD(0x51C, 0x1CC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA13__GPIO_3_13 IOMUX_PAD(0x520, 0x1D0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA14__GPIO_3_14 IOMUX_PAD(0x524, 0x1D4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA15__GPIO_3_15 IOMUX_PAD(0x528, 0x1D8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_WE_B__GPIO_6_12 IOMUX_PAD(0x52C, 0x1DC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_RE_B__GPIO_6_13 IOMUX_PAD(0x530, 0x1E0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_WAIT__GPIO_5_0 IOMUX_PAD(0x534, 0x1E4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_BCLK__EIM_BCLK IOMUX_PAD(0x538, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NVCC_EIM7__NVCC_EIM7 IOMUX_PAD(0x53C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_LVDS1_TX3_P__GPIO_6_22 IOMUX_PAD(NON_PAD_I, 0x1EC, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_LVDS1_TX2_P__GPIO_6_24 IOMUX_PAD(NON_PAD_I, 0x1F0, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_LVDS1_CLK_P__GPIO_6_26 IOMUX_PAD(NON_PAD_I, 0x1F4, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_LVDS1_TX1_P__GPIO_6_28 IOMUX_PAD(NON_PAD_I, 0x1F8, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_LVDS1_TX0_P__GPIO_6_30 IOMUX_PAD(NON_PAD_I, 0x1FC, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_LVDS0_TX3_P__GPIO_7_22 IOMUX_PAD(NON_PAD_I, 0x200, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_LVDS0_CLK_P__GPIO_7_24 IOMUX_PAD(NON_PAD_I, 0x204, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_LVDS0_TX2_P__GPIO_7_26 IOMUX_PAD(NON_PAD_I, 0x208, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_LVDS0_TX1_P__GPIO_7_28 IOMUX_PAD(NON_PAD_I, 0x20C, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_LVDS0_TX0_P__GPIO_7_30 IOMUX_PAD(NON_PAD_I, 0x210, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_10__GPIO_4_0 IOMUX_PAD(0x540, 0x214, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_11__GPIO_4_1 IOMUX_PAD(0x544, 0x218, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_12__GPIO_4_2 IOMUX_PAD(0x548, 0x21C, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_13__GPIO_4_3 IOMUX_PAD(0x54C, 0x220, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_14__GPIO_4_4 IOMUX_PAD(0x550, 0x224, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DRAM_DQM3__DRAM_DQM3 IOMUX_PAD(0x554, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DRAM_SDQS3__DRAM_SDQS3 IOMUX_PAD(0x558, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DRAM_SDCKE1__DRAM_SDCKE1 IOMUX_PAD(0x55C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DRAM_DQM2__DRAM_DQM2 IOMUX_PAD(0x560, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DRAM_SDODT1__DRAM_SDODT1 IOMUX_PAD(0x564, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DRAM_SDQS2__DRAM_SDQS2 IOMUX_PAD(0x568, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DRAM_RESET__DRAM_RESET IOMUX_PAD(0x56C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DRAM_SDCLK1__DRAM_SDCLK1 IOMUX_PAD(0x570, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DRAM_CAS__DRAM_CAS IOMUX_PAD(0x574, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DRAM_SDCLK0__DRAM_SDCLK0 IOMUX_PAD(0x578, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DRAM_SDQS0__DRAM_SDQS0 IOMUX_PAD(0x57C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DRAM_SDODT0__DRAM_SDODT0 IOMUX_PAD(0x580, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DRAM_DQM0__DRAM_DQM0 IOMUX_PAD(0x584, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DRAM_RAS__DRAM_RAS IOMUX_PAD(0x588, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DRAM_SDCKE0__DRAM_SDCKE0 IOMUX_PAD(0x58C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DRAM_SDQS1__DRAM_SDQS1 IOMUX_PAD(0x590, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_DRAM_DQM1__DRAM_DQM1 IOMUX_PAD(0x594, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_PMIC_ON_REQ__PMIC_ON_REQ IOMUX_PAD(0x598, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_PMIC_STBY_REQ__PMIC_STBY_REQ IOMUX_PAD(0x59C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_CLE__GPIO_6_7 IOMUX_PAD(0x5A0, 0x228,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_ALE__GPIO_6_8 IOMUX_PAD(0x5A4, 0x22C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_WP_B__GPIO_6_9 IOMUX_PAD(0x5A8, 0x230,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_RB0__GPIO_6_10 IOMUX_PAD(0x5AC, 0x234,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_CS0__GPIO_6_11 IOMUX_PAD(0x5B0, 0x238,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_CS1__GPIO_6_14 IOMUX_PAD(0x5B4, 0x23C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_CS2__GPIO_6_15 IOMUX_PAD(0x5B8, 0x240,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_CS3__GPIO_6_16 IOMUX_PAD(0x5BC, 0x244,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NVCC_NANDF__NVCC_NANDF IOMUX_PAD(0x5C0, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_MDIO__GPIO_1_22 IOMUX_PAD(0x5C4, 0x248,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_REF_CLK__GPIO_1_23 IOMUX_PAD(0x5C8, 0x24C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_RX_ER__GPIO_1_24 IOMUX_PAD(0x5CC, 0x250,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_CRS_DV__GPIO_1_25 IOMUX_PAD(0x5D0, 0x254,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_RXD1__GPIO_1_26 IOMUX_PAD(0x5D4, 0x258,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_RXD0__GPIO_1_27 IOMUX_PAD(0x5D8, 0x25C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_TX_EN__GPIO_1_28 IOMUX_PAD(0x5DC, 0x260,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_TXD1__GPIO_1_29 IOMUX_PAD(0x5E0, 0x264,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_TXD0__GPIO_1_30 IOMUX_PAD(0x5E4, 0x268,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_MDC__GPIO_1_31 IOMUX_PAD(0x5E8, 0x26C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NVCC_FEC__NVCC_FEC IOMUX_PAD(0x5EC, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DIOW__GPIO_6_17 IOMUX_PAD(0x5F0, 0x270,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DMACK__GPIO_6_18 IOMUX_PAD(0x5F4, 0x274,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DMARQ__GPIO_7_0 IOMUX_PAD(0x5F8, 0x278,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_BUFFER_EN__GPIO_7_1 IOMUX_PAD(0x5FC, 0x27C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_INTRQ__GPIO_7_2 IOMUX_PAD(0x600, 0x280,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DIOR__GPIO_7_3 IOMUX_PAD(0x604, 0x284,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_RESET_B__GPIO_7_4 IOMUX_PAD(0x608, 0x288,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_IORDY__GPIO_7_5 IOMUX_PAD(0x60C, 0x28C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DA_0__GPIO_7_6 IOMUX_PAD(0x610, 0x290,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DA_1__GPIO_7_7 IOMUX_PAD(0x614, 0x294,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DA_2__GPIO_7_8 IOMUX_PAD(0x618, 0x298,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_CS_0__GPIO_7_9 IOMUX_PAD(0x61C, 0x29C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_CS_1__GPIO_7_10 IOMUX_PAD(0x620, 0x2A0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NVCC_ATA2__NVCC_ATA2 IOMUX_PAD(0x624, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DATA0__GPIO_2_0 IOMUX_PAD(0x628, 0x2A4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DATA1__GPIO_2_1 IOMUX_PAD(0x62C, 0x2A8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DATA2__GPIO_2_2 IOMUX_PAD(0x630, 0x2AC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DATA3__GPIO_2_3 IOMUX_PAD(0x634, 0x2B0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DATA4__GPIO_2_4 IOMUX_PAD(0x638, 0x2B4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DATA5__GPIO_2_5 IOMUX_PAD(0x63C, 0x2B8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DATA6__GPIO_2_6 IOMUX_PAD(0x640, 0x2BC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DATA7__GPIO_2_7 IOMUX_PAD(0x644, 0x2C0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DATA8__GPIO_2_8 IOMUX_PAD(0x648, 0x2C4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DATA9__GPIO_2_9 IOMUX_PAD(0x64C, 0x2C8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DATA10__GPIO_2_10 IOMUX_PAD(0x650, 0x2CC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DATA11__GPIO_2_11 IOMUX_PAD(0x654, 0x2D0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DATA12__GPIO_2_12 IOMUX_PAD(0x658, 0x2D4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DATA13__GPIO_2_13 IOMUX_PAD(0x65C, 0x2D8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DATA14__GPIO_2_14 IOMUX_PAD(0x660, 0x2DC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_ATA_DATA15__GPIO_2_15 IOMUX_PAD(0x664, 0x2E0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NVCC_ATA0__NVCC_ATA0 IOMUX_PAD(0x668, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_SD1_DATA0__GPIO_1_16 IOMUX_PAD(0x66C, 0x2E4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_SD1_DATA1__GPIO_1_17 IOMUX_PAD(0x670, 0x2E8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_SD1_CMD__GPIO_1_18 IOMUX_PAD(0x674, 0x2EC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_SD1_DATA2__GPIO_1_19 IOMUX_PAD(0x678, 0x2F0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_SD1_CLK__GPIO_1_20 IOMUX_PAD(0x67C, 0x2F4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_SD1_DATA3__GPIO_1_21 IOMUX_PAD(0x680, 0x2F8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NVCC_SD1__NVCC_SD1 IOMUX_PAD(0x684, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_SD2_CLK__GPIO_1_10 IOMUX_PAD(0x688, 0x2FC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_SD2_CMD__GPIO_1_11 IOMUX_PAD(0x68C, 0x300,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_SD2_DATA3__GPIO_1_12 IOMUX_PAD(0x690, 0x304,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_SD2_DATA2__GPIO_1_13 IOMUX_PAD(0x694, 0x308,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_SD2_DATA1__GPIO_1_14 IOMUX_PAD(0x698, 0x30C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_SD2_DATA0__GPIO_1_15 IOMUX_PAD(0x69C, 0x310,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NVCC_SD2__NVCC_SD2 IOMUX_PAD(0x6A0, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_0__GPIO_1_0 IOMUX_PAD(0x6A4, 0x314,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_1__GPIO_1_1 IOMUX_PAD(0x6A8, 0x318,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_9__GPIO_1_9 IOMUX_PAD(0x6AC, 0x31C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_3__GPIO_1_3 IOMUX_PAD(0x6B0, 0x320,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_6__GPIO_1_6 IOMUX_PAD(0x6B4, 0x324,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_2__GPIO_1_2 IOMUX_PAD(0x6B8, 0x328,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_4__GPIO_1_4 IOMUX_PAD(0x6BC, 0x32C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_5__GPIO_1_5 IOMUX_PAD(0x6C0, 0x330,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_7__GPIO_1_7 IOMUX_PAD(0x6C4, 0x334,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_8__GPIO_1_8 IOMUX_PAD(0x6C8, 0x338,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_16__GPIO_7_11 IOMUX_PAD(0x6CC, 0x33C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_17__GPIO_7_12 IOMUX_PAD(0x6D0, 0x340,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_18__GPIO_7_13 IOMUX_PAD(0x6D4, 0x344,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_NVCC_GPIO__NVCC_GPIO IOMUX_PAD(0x6D8, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_POR_B__POR_B IOMUX_PAD(0x6DC, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_BOOT_MODE1__BOOT_MODE1 IOMUX_PAD(0x6E0, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_RESET_IN_B__RESET_IN_B IOMUX_PAD(0x6E4, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_BOOT_MODE0__BOOT_MODE0 IOMUX_PAD(0x6E8, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_TEST_MODE__TEST_MODE IOMUX_PAD(0x6EC, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GRP_ADDDS__GRP_ADDDS IOMUX_PAD(0x6F0, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GRP_DDRMODE_CTL__GRP_DDRMODE_CTL IOMUX_PAD(0x6F4, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GRP_DDRPKE__GRP_DDRPKE IOMUX_PAD(0x6FC, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GRP_DDRPK__GRP_DDRPK IOMUX_PAD(0x708, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GRP_TERM_CTL3__GRP_TERM_CTL3 IOMUX_PAD(0x70C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GRP_DDRHYS__GRP_DDRHYS IOMUX_PAD(0x710, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GRP_DDRMODE__GRP_DDRMODE IOMUX_PAD(0x714, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GRP_B0DS__GRP_B0DS IOMUX_PAD(0x718, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GRP_B1DS__GRP_B1DS IOMUX_PAD(0x71C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GRP_CTLDS__GRP_CTLDS IOMUX_PAD(0x720, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GRP_DDR_TYPE__GRP_DDR_TYPE IOMUX_PAD(0x724, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GRP_B2DS__GRP_B2DS IOMUX_PAD(0x728, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) -#define MX53_PAD_GRP_B3DS__GRP_B3DS IOMUX_PAD(0x72C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GPIO_19__KPP_COL_5 (_MX53_PAD_GPIO_19__KPP_COL_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_19__GPIO4_5 (_MX53_PAD_GPIO_19__GPIO4_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_19__CCM_CLKO (_MX53_PAD_GPIO_19__CCM_CLKO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_19__SPDIF_OUT1 (_MX53_PAD_GPIO_19__SPDIF_OUT1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2 (_MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_19__ECSPI1_RDY (_MX53_PAD_GPIO_19__ECSPI1_RDY | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_19__FEC_TDATA_3 (_MX53_PAD_GPIO_19__FEC_TDATA_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_19__SRC_INT_BOOT (_MX53_PAD_GPIO_19__SRC_INT_BOOT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL0__KPP_COL_0 (_MX53_PAD_KEY_COL0__KPP_COL_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL0__GPIO4_6 (_MX53_PAD_KEY_COL0__GPIO4_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC (_MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL0__UART4_TXD_MUX (_MX53_PAD_KEY_COL0__UART4_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL0__ECSPI1_SCLK (_MX53_PAD_KEY_COL0__ECSPI1_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL0__FEC_RDATA_3 (_MX53_PAD_KEY_COL0__FEC_RDATA_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL0__SRC_ANY_PU_RST (_MX53_PAD_KEY_COL0__SRC_ANY_PU_RST | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW0__KPP_ROW_0 (_MX53_PAD_KEY_ROW0__KPP_ROW_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW0__GPIO4_7 (_MX53_PAD_KEY_ROW0__GPIO4_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD (_MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW0__UART4_RXD_MUX (_MX53_PAD_KEY_ROW0__UART4_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW0__ECSPI1_MOSI (_MX53_PAD_KEY_ROW0__ECSPI1_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW0__FEC_TX_ER (_MX53_PAD_KEY_ROW0__FEC_TX_ER | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL1__KPP_COL_1 (_MX53_PAD_KEY_COL1__KPP_COL_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL1__GPIO4_8 (_MX53_PAD_KEY_COL1__GPIO4_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS (_MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL1__UART5_TXD_MUX (_MX53_PAD_KEY_COL1__UART5_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL1__ECSPI1_MISO (_MX53_PAD_KEY_COL1__ECSPI1_MISO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL1__FEC_RX_CLK (_MX53_PAD_KEY_COL1__FEC_RX_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL1__USBPHY1_TXREADY (_MX53_PAD_KEY_COL1__USBPHY1_TXREADY | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW1__KPP_ROW_1 (_MX53_PAD_KEY_ROW1__KPP_ROW_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW1__GPIO4_9 (_MX53_PAD_KEY_ROW1__GPIO4_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD (_MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW1__UART5_RXD_MUX (_MX53_PAD_KEY_ROW1__UART5_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW1__ECSPI1_SS0 (_MX53_PAD_KEY_ROW1__ECSPI1_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW1__FEC_COL (_MX53_PAD_KEY_ROW1__FEC_COL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW1__USBPHY1_RXVALID (_MX53_PAD_KEY_ROW1__USBPHY1_RXVALID | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL2__KPP_COL_2 (_MX53_PAD_KEY_COL2__KPP_COL_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL2__GPIO4_10 (_MX53_PAD_KEY_COL2__GPIO4_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL2__CAN1_TXCAN (_MX53_PAD_KEY_COL2__CAN1_TXCAN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL2__FEC_MDIO (_MX53_PAD_KEY_COL2__FEC_MDIO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL2__ECSPI1_SS1 (_MX53_PAD_KEY_COL2__ECSPI1_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL2__FEC_RDATA_2 (_MX53_PAD_KEY_COL2__FEC_RDATA_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE (_MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW2__KPP_ROW_2 (_MX53_PAD_KEY_ROW2__KPP_ROW_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW2__GPIO4_11 (_MX53_PAD_KEY_ROW2__GPIO4_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW2__CAN1_RXCAN (_MX53_PAD_KEY_ROW2__CAN1_RXCAN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW2__FEC_MDC (_MX53_PAD_KEY_ROW2__FEC_MDC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW2__ECSPI1_SS2 (_MX53_PAD_KEY_ROW2__ECSPI1_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW2__FEC_TDATA_2 (_MX53_PAD_KEY_ROW2__FEC_TDATA_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW2__USBPHY1_RXERROR (_MX53_PAD_KEY_ROW2__USBPHY1_RXERROR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL3__KPP_COL_3 (_MX53_PAD_KEY_COL3__KPP_COL_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL3__GPIO4_12 (_MX53_PAD_KEY_COL3__GPIO4_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL3__USBOH3_H2_DP (_MX53_PAD_KEY_COL3__USBOH3_H2_DP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL3__SPDIF_IN1 (_MX53_PAD_KEY_COL3__SPDIF_IN1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL3__I2C2_SCL (_MX53_PAD_KEY_COL3__I2C2_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL3__ECSPI1_SS3 (_MX53_PAD_KEY_COL3__ECSPI1_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL3__FEC_CRS (_MX53_PAD_KEY_COL3__FEC_CRS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK (_MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW3__KPP_ROW_3 (_MX53_PAD_KEY_ROW3__KPP_ROW_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW3__GPIO4_13 (_MX53_PAD_KEY_ROW3__GPIO4_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW3__USBOH3_H2_DM (_MX53_PAD_KEY_ROW3__USBOH3_H2_DM | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK (_MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW3__I2C2_SDA (_MX53_PAD_KEY_ROW3__I2C2_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW3__OSC32K_32K_OUT (_MX53_PAD_KEY_ROW3__OSC32K_32K_OUT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW3__CCM_PLL4_BYP (_MX53_PAD_KEY_ROW3__CCM_PLL4_BYP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 (_MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL4__KPP_COL_4 (_MX53_PAD_KEY_COL4__KPP_COL_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL4__GPIO4_14 (_MX53_PAD_KEY_COL4__GPIO4_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL4__CAN2_TXCAN (_MX53_PAD_KEY_COL4__CAN2_TXCAN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL4__IPU_SISG_4 (_MX53_PAD_KEY_COL4__IPU_SISG_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL4__UART5_RTS (_MX53_PAD_KEY_COL4__UART5_RTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC (_MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1 (_MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW4__KPP_ROW_4 (_MX53_PAD_KEY_ROW4__KPP_ROW_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW4__GPIO4_15 (_MX53_PAD_KEY_ROW4__GPIO4_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW4__CAN2_RXCAN (_MX53_PAD_KEY_ROW4__CAN2_RXCAN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW4__IPU_SISG_5 (_MX53_PAD_KEY_ROW4__IPU_SISG_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW4__UART5_CTS (_MX53_PAD_KEY_ROW4__UART5_CTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR (_MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID (_MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK (_MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_DISP_CLK__GPIO4_16 (_MX53_PAD_DI0_DISP_CLK__GPIO4_16 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR (_MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0 (_MX53_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_DISP_CLK__EMI_EMI_DEBUG_0 (_MX53_PAD_DI0_DISP_CLK__EMI_EMI_DEBUG_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_DISP_CLK__USBPHY1_AVALID (_MX53_PAD_DI0_DISP_CLK__USBPHY1_AVALID | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 (_MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN15__GPIO4_17 (_MX53_PAD_DI0_PIN15__GPIO4_17 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC (_MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1 (_MX53_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN15__EMI_EMI_DEBUG_1 (_MX53_PAD_DI0_PIN15__EMI_EMI_DEBUG_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN15__USBPHY1_BVALID (_MX53_PAD_DI0_PIN15__USBPHY1_BVALID | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 (_MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN2__GPIO4_18 (_MX53_PAD_DI0_PIN2__GPIO4_18 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD (_MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2 (_MX53_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN2__EMI_EMI_DEBUG_2 (_MX53_PAD_DI0_PIN2__EMI_EMI_DEBUG_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN2__USBPHY1_ENDSESSION (_MX53_PAD_DI0_PIN2__USBPHY1_ENDSESSION | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 (_MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN3__GPIO4_19 (_MX53_PAD_DI0_PIN3__GPIO4_19 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS (_MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3 (_MX53_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN3__EMI_EMI_DEBUG_3 (_MX53_PAD_DI0_PIN3__EMI_EMI_DEBUG_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN3__USBPHY1_IDDIG (_MX53_PAD_DI0_PIN3__USBPHY1_IDDIG | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN4__IPU_DI0_PIN4 (_MX53_PAD_DI0_PIN4__IPU_DI0_PIN4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN4__GPIO4_20 (_MX53_PAD_DI0_PIN4__GPIO4_20 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD (_MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN4__ESDHC1_WP (_MX53_PAD_DI0_PIN4__ESDHC1_WP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN4__SDMA_DEBUG_YIELD (_MX53_PAD_DI0_PIN4__SDMA_DEBUG_YIELD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN4__EMI_EMI_DEBUG_4 (_MX53_PAD_DI0_PIN4__EMI_EMI_DEBUG_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DI0_PIN4__USBPHY1_HOSTDISCONNECT (_MX53_PAD_DI0_PIN4__USBPHY1_HOSTDISCONNECT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 (_MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT0__GPIO4_21 (_MX53_PAD_DISP0_DAT0__GPIO4_21 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT0__CSPI_SCLK (_MX53_PAD_DISP0_DAT0__CSPI_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0 (_MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN (_MX53_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT0__EMI_EMI_DEBUG_5 (_MX53_PAD_DISP0_DAT0__EMI_EMI_DEBUG_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT0__USBPHY2_TXREADY (_MX53_PAD_DISP0_DAT0__USBPHY2_TXREADY | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 (_MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT1__GPIO4_22 (_MX53_PAD_DISP0_DAT1__GPIO4_22 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT1__CSPI_MOSI (_MX53_PAD_DISP0_DAT1__CSPI_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1 (_MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL (_MX53_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT1__EMI_EMI_DEBUG_6 (_MX53_PAD_DISP0_DAT1__EMI_EMI_DEBUG_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT1__USBPHY2_RXVALID (_MX53_PAD_DISP0_DAT1__USBPHY2_RXVALID | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 (_MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT2__GPIO4_23 (_MX53_PAD_DISP0_DAT2__GPIO4_23 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT2__CSPI_MISO (_MX53_PAD_DISP0_DAT2__CSPI_MISO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2 (_MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT2__SDMA_DEBUG_MODE (_MX53_PAD_DISP0_DAT2__SDMA_DEBUG_MODE | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT2__EMI_EMI_DEBUG_7 (_MX53_PAD_DISP0_DAT2__EMI_EMI_DEBUG_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT2__USBPHY2_RXACTIVE (_MX53_PAD_DISP0_DAT2__USBPHY2_RXACTIVE | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 (_MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT3__GPIO4_24 (_MX53_PAD_DISP0_DAT3__GPIO4_24 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT3__CSPI_SS0 (_MX53_PAD_DISP0_DAT3__CSPI_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3 (_MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR (_MX53_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT3__EMI_EMI_DEBUG_8 (_MX53_PAD_DISP0_DAT3__EMI_EMI_DEBUG_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT3__USBPHY2_RXERROR (_MX53_PAD_DISP0_DAT3__USBPHY2_RXERROR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 (_MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT4__GPIO4_25 (_MX53_PAD_DISP0_DAT4__GPIO4_25 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT4__CSPI_SS1 (_MX53_PAD_DISP0_DAT4__CSPI_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4 (_MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB (_MX53_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT4__EMI_EMI_DEBUG_9 (_MX53_PAD_DISP0_DAT4__EMI_EMI_DEBUG_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT4__USBPHY2_SIECLOCK (_MX53_PAD_DISP0_DAT4__USBPHY2_SIECLOCK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 (_MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT5__GPIO4_26 (_MX53_PAD_DISP0_DAT5__GPIO4_26 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT5__CSPI_SS2 (_MX53_PAD_DISP0_DAT5__CSPI_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5 (_MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS (_MX53_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT5__EMI_EMI_DEBUG_10 (_MX53_PAD_DISP0_DAT5__EMI_EMI_DEBUG_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT5__USBPHY2_LINESTATE_0 (_MX53_PAD_DISP0_DAT5__USBPHY2_LINESTATE_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 (_MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT6__GPIO4_27 (_MX53_PAD_DISP0_DAT6__GPIO4_27 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT6__CSPI_SS3 (_MX53_PAD_DISP0_DAT6__CSPI_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6 (_MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE (_MX53_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT6__EMI_EMI_DEBUG_11 (_MX53_PAD_DISP0_DAT6__EMI_EMI_DEBUG_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT6__USBPHY2_LINESTATE_1 (_MX53_PAD_DISP0_DAT6__USBPHY2_LINESTATE_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 (_MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT7__GPIO4_28 (_MX53_PAD_DISP0_DAT7__GPIO4_28 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT7__CSPI_RDY (_MX53_PAD_DISP0_DAT7__CSPI_RDY | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7 (_MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0 (_MX53_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT7__EMI_EMI_DEBUG_12 (_MX53_PAD_DISP0_DAT7__EMI_EMI_DEBUG_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT7__USBPHY2_VBUSVALID (_MX53_PAD_DISP0_DAT7__USBPHY2_VBUSVALID | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 (_MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT8__GPIO4_29 (_MX53_PAD_DISP0_DAT8__GPIO4_29 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT8__PWM1_PWMO (_MX53_PAD_DISP0_DAT8__PWM1_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT8__WDOG1_WDOG_B (_MX53_PAD_DISP0_DAT8__WDOG1_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1 (_MX53_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT8__EMI_EMI_DEBUG_13 (_MX53_PAD_DISP0_DAT8__EMI_EMI_DEBUG_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT8__USBPHY2_AVALID (_MX53_PAD_DISP0_DAT8__USBPHY2_AVALID | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 (_MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT9__GPIO4_30 (_MX53_PAD_DISP0_DAT9__GPIO4_30 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT9__PWM2_PWMO (_MX53_PAD_DISP0_DAT9__PWM2_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT9__WDOG2_WDOG_B (_MX53_PAD_DISP0_DAT9__WDOG2_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2 (_MX53_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT9__EMI_EMI_DEBUG_14 (_MX53_PAD_DISP0_DAT9__EMI_EMI_DEBUG_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT9__USBPHY2_VSTATUS_0 (_MX53_PAD_DISP0_DAT9__USBPHY2_VSTATUS_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 (_MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT10__GPIO4_31 (_MX53_PAD_DISP0_DAT10__GPIO4_31 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP (_MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3 (_MX53_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT10__EMI_EMI_DEBUG_15 (_MX53_PAD_DISP0_DAT10__EMI_EMI_DEBUG_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT10__USBPHY2_VSTATUS_1 (_MX53_PAD_DISP0_DAT10__USBPHY2_VSTATUS_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 (_MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT11__GPIO5_5 (_MX53_PAD_DISP0_DAT11__GPIO5_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT (_MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4 (_MX53_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT11__EMI_EMI_DEBUG_16 (_MX53_PAD_DISP0_DAT11__EMI_EMI_DEBUG_16 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT11__USBPHY2_VSTATUS_2 (_MX53_PAD_DISP0_DAT11__USBPHY2_VSTATUS_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 (_MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT12__GPIO5_6 (_MX53_PAD_DISP0_DAT12__GPIO5_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK (_MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5 (_MX53_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT12__EMI_EMI_DEBUG_17 (_MX53_PAD_DISP0_DAT12__EMI_EMI_DEBUG_17 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT12__USBPHY2_VSTATUS_3 (_MX53_PAD_DISP0_DAT12__USBPHY2_VSTATUS_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 (_MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT13__GPIO5_7 (_MX53_PAD_DISP0_DAT13__GPIO5_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS (_MX53_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0 (_MX53_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT13__EMI_EMI_DEBUG_18 (_MX53_PAD_DISP0_DAT13__EMI_EMI_DEBUG_18 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT13__USBPHY2_VSTATUS_4 (_MX53_PAD_DISP0_DAT13__USBPHY2_VSTATUS_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 (_MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT14__GPIO5_8 (_MX53_PAD_DISP0_DAT14__GPIO5_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC (_MX53_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1 (_MX53_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT14__EMI_EMI_DEBUG_19 (_MX53_PAD_DISP0_DAT14__EMI_EMI_DEBUG_19 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT14__USBPHY2_VSTATUS_5 (_MX53_PAD_DISP0_DAT14__USBPHY2_VSTATUS_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 (_MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT15__GPIO5_9 (_MX53_PAD_DISP0_DAT15__GPIO5_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT15__ECSPI1_SS1 (_MX53_PAD_DISP0_DAT15__ECSPI1_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT15__ECSPI2_SS1 (_MX53_PAD_DISP0_DAT15__ECSPI2_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2 (_MX53_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT15__EMI_EMI_DEBUG_20 (_MX53_PAD_DISP0_DAT15__EMI_EMI_DEBUG_20 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT15__USBPHY2_VSTATUS_6 (_MX53_PAD_DISP0_DAT15__USBPHY2_VSTATUS_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 (_MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT16__GPIO5_10 (_MX53_PAD_DISP0_DAT16__GPIO5_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT16__ECSPI2_MOSI (_MX53_PAD_DISP0_DAT16__ECSPI2_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC (_MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0 (_MX53_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT16__SDMA_DEBUG_EVT_CHN_LINES_3 (_MX53_PAD_DISP0_DAT16__SDMA_DEBUG_EVT_CHN_LINES_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT16__EMI_EMI_DEBUG_21 (_MX53_PAD_DISP0_DAT16__EMI_EMI_DEBUG_21 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT16__USBPHY2_VSTATUS_7 (_MX53_PAD_DISP0_DAT16__USBPHY2_VSTATUS_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 (_MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT17__GPIO5_11 (_MX53_PAD_DISP0_DAT17__GPIO5_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT17__ECSPI2_MISO (_MX53_PAD_DISP0_DAT17__ECSPI2_MISO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD (_MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1 (_MX53_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT17__SDMA_DEBUG_EVT_CHN_LINES_4 (_MX53_PAD_DISP0_DAT17__SDMA_DEBUG_EVT_CHN_LINES_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT17__EMI_EMI_DEBUG_22 (_MX53_PAD_DISP0_DAT17__EMI_EMI_DEBUG_22 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 (_MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT18__GPIO5_12 (_MX53_PAD_DISP0_DAT18__GPIO5_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT18__ECSPI2_SS0 (_MX53_PAD_DISP0_DAT18__ECSPI2_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS (_MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS (_MX53_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT18__SDMA_DEBUG_EVT_CHN_LINES_5 (_MX53_PAD_DISP0_DAT18__SDMA_DEBUG_EVT_CHN_LINES_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT18__EMI_EMI_DEBUG_23 (_MX53_PAD_DISP0_DAT18__EMI_EMI_DEBUG_23 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT18__EMI_WEIM_CS_2 (_MX53_PAD_DISP0_DAT18__EMI_WEIM_CS_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 (_MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT19__GPIO5_13 (_MX53_PAD_DISP0_DAT19__GPIO5_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT19__ECSPI2_SCLK (_MX53_PAD_DISP0_DAT19__ECSPI2_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD (_MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC (_MX53_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT19__SDMA_DEBUG_EVT_CHN_LINES_6 (_MX53_PAD_DISP0_DAT19__SDMA_DEBUG_EVT_CHN_LINES_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT19__EMI_EMI_DEBUG_24 (_MX53_PAD_DISP0_DAT19__EMI_EMI_DEBUG_24 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT19__EMI_WEIM_CS_3 (_MX53_PAD_DISP0_DAT19__EMI_WEIM_CS_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 (_MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT20__GPIO5_14 (_MX53_PAD_DISP0_DAT20__GPIO5_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT20__ECSPI1_SCLK (_MX53_PAD_DISP0_DAT20__ECSPI1_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC (_MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7 (_MX53_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT20__EMI_EMI_DEBUG_25 (_MX53_PAD_DISP0_DAT20__EMI_EMI_DEBUG_25 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT20__SATA_PHY_TDI (_MX53_PAD_DISP0_DAT20__SATA_PHY_TDI | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 (_MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT21__GPIO5_15 (_MX53_PAD_DISP0_DAT21__GPIO5_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT21__ECSPI1_MOSI (_MX53_PAD_DISP0_DAT21__ECSPI1_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD (_MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0 (_MX53_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT21__EMI_EMI_DEBUG_26 (_MX53_PAD_DISP0_DAT21__EMI_EMI_DEBUG_26 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT21__SATA_PHY_TDO (_MX53_PAD_DISP0_DAT21__SATA_PHY_TDO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 (_MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT22__GPIO5_16 (_MX53_PAD_DISP0_DAT22__GPIO5_16 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT22__ECSPI1_MISO (_MX53_PAD_DISP0_DAT22__ECSPI1_MISO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS (_MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1 (_MX53_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT22__EMI_EMI_DEBUG_27 (_MX53_PAD_DISP0_DAT22__EMI_EMI_DEBUG_27 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT22__SATA_PHY_TCK (_MX53_PAD_DISP0_DAT22__SATA_PHY_TCK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 (_MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT23__GPIO5_17 (_MX53_PAD_DISP0_DAT23__GPIO5_17 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT23__ECSPI1_SS0 (_MX53_PAD_DISP0_DAT23__ECSPI1_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD (_MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2 (_MX53_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT23__EMI_EMI_DEBUG_28 (_MX53_PAD_DISP0_DAT23__EMI_EMI_DEBUG_28 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_DISP0_DAT23__SATA_PHY_TMS (_MX53_PAD_DISP0_DAT23__SATA_PHY_TMS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK (_MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_PIXCLK__GPIO5_18 (_MX53_PAD_CSI0_PIXCLK__GPIO5_18 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0 (_MX53_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_PIXCLK__EMI_EMI_DEBUG_29 (_MX53_PAD_CSI0_PIXCLK__EMI_EMI_DEBUG_29 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC (_MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_MCLK__GPIO5_19 (_MX53_PAD_CSI0_MCLK__GPIO5_19 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK (_MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1 (_MX53_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_MCLK__EMI_EMI_DEBUG_30 (_MX53_PAD_CSI0_MCLK__EMI_EMI_DEBUG_30 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_MCLK__TPIU_TRCTL (_MX53_PAD_CSI0_MCLK__TPIU_TRCTL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN (_MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DATA_EN__GPIO5_20 (_MX53_PAD_CSI0_DATA_EN__GPIO5_20 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2 (_MX53_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DATA_EN__EMI_EMI_DEBUG_31 (_MX53_PAD_CSI0_DATA_EN__EMI_EMI_DEBUG_31 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DATA_EN__TPIU_TRCLK (_MX53_PAD_CSI0_DATA_EN__TPIU_TRCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC (_MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_VSYNC__GPIO5_21 (_MX53_PAD_CSI0_VSYNC__GPIO5_21 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3 (_MX53_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_VSYNC__EMI_EMI_DEBUG_32 (_MX53_PAD_CSI0_VSYNC__EMI_EMI_DEBUG_32 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_VSYNC__TPIU_TRACE_0 (_MX53_PAD_CSI0_VSYNC__TPIU_TRACE_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4 (_MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT4__GPIO5_22 (_MX53_PAD_CSI0_DAT4__GPIO5_22 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT4__KPP_COL_5 (_MX53_PAD_CSI0_DAT4__KPP_COL_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT4__ECSPI1_SCLK (_MX53_PAD_CSI0_DAT4__ECSPI1_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP (_MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC (_MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT4__EMI_EMI_DEBUG_33 (_MX53_PAD_CSI0_DAT4__EMI_EMI_DEBUG_33 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT4__TPIU_TRACE_1 (_MX53_PAD_CSI0_DAT4__TPIU_TRACE_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5 (_MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT5__GPIO5_23 (_MX53_PAD_CSI0_DAT5__GPIO5_23 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT5__KPP_ROW_5 (_MX53_PAD_CSI0_DAT5__KPP_ROW_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT5__ECSPI1_MOSI (_MX53_PAD_CSI0_DAT5__ECSPI1_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT (_MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD (_MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT5__EMI_EMI_DEBUG_34 (_MX53_PAD_CSI0_DAT5__EMI_EMI_DEBUG_34 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT5__TPIU_TRACE_2 (_MX53_PAD_CSI0_DAT5__TPIU_TRACE_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6 (_MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT6__GPIO5_24 (_MX53_PAD_CSI0_DAT6__GPIO5_24 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT6__KPP_COL_6 (_MX53_PAD_CSI0_DAT6__KPP_COL_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT6__ECSPI1_MISO (_MX53_PAD_CSI0_DAT6__ECSPI1_MISO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK (_MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS (_MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT6__EMI_EMI_DEBUG_35 (_MX53_PAD_CSI0_DAT6__EMI_EMI_DEBUG_35 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT6__TPIU_TRACE_3 (_MX53_PAD_CSI0_DAT6__TPIU_TRACE_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7 (_MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT7__GPIO5_25 (_MX53_PAD_CSI0_DAT7__GPIO5_25 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT7__KPP_ROW_6 (_MX53_PAD_CSI0_DAT7__KPP_ROW_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT7__ECSPI1_SS0 (_MX53_PAD_CSI0_DAT7__ECSPI1_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR (_MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD (_MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT7__EMI_EMI_DEBUG_36 (_MX53_PAD_CSI0_DAT7__EMI_EMI_DEBUG_36 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT7__TPIU_TRACE_4 (_MX53_PAD_CSI0_DAT7__TPIU_TRACE_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8 (_MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT8__GPIO5_26 (_MX53_PAD_CSI0_DAT8__GPIO5_26 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT8__KPP_COL_7 (_MX53_PAD_CSI0_DAT8__KPP_COL_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT8__ECSPI2_SCLK (_MX53_PAD_CSI0_DAT8__ECSPI2_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC (_MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT8__I2C1_SDA (_MX53_PAD_CSI0_DAT8__I2C1_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 (_MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 (_MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 (_MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT9__GPIO5_27 (_MX53_PAD_CSI0_DAT9__GPIO5_27 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT9__KPP_ROW_7 (_MX53_PAD_CSI0_DAT9__KPP_ROW_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT9__ECSPI2_MOSI (_MX53_PAD_CSI0_DAT9__ECSPI2_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR (_MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT9__I2C1_SCL (_MX53_PAD_CSI0_DAT9__I2C1_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 (_MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 (_MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 (_MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT10__GPIO5_28 (_MX53_PAD_CSI0_DAT10__GPIO5_28 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT10__UART1_TXD_MUX (_MX53_PAD_CSI0_DAT10__UART1_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT10__ECSPI2_MISO (_MX53_PAD_CSI0_DAT10__ECSPI2_MISO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC (_MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4 (_MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT10__EMI_EMI_DEBUG_39 (_MX53_PAD_CSI0_DAT10__EMI_EMI_DEBUG_39 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT10__TPIU_TRACE_7 (_MX53_PAD_CSI0_DAT10__TPIU_TRACE_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11 (_MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT11__GPIO5_29 (_MX53_PAD_CSI0_DAT11__GPIO5_29 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT11__UART1_RXD_MUX (_MX53_PAD_CSI0_DAT11__UART1_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT11__ECSPI2_SS0 (_MX53_PAD_CSI0_DAT11__ECSPI2_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS (_MX53_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5 (_MX53_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT11__EMI_EMI_DEBUG_40 (_MX53_PAD_CSI0_DAT11__EMI_EMI_DEBUG_40 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT11__TPIU_TRACE_8 (_MX53_PAD_CSI0_DAT11__TPIU_TRACE_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 (_MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT12__GPIO5_30 (_MX53_PAD_CSI0_DAT12__GPIO5_30 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT12__UART4_TXD_MUX (_MX53_PAD_CSI0_DAT12__UART4_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 (_MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 (_MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41 (_MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT12__TPIU_TRACE_9 (_MX53_PAD_CSI0_DAT12__TPIU_TRACE_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 (_MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT13__GPIO5_31 (_MX53_PAD_CSI0_DAT13__GPIO5_31 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT13__UART4_RXD_MUX (_MX53_PAD_CSI0_DAT13__UART4_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 (_MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 (_MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42 (_MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT13__TPIU_TRACE_10 (_MX53_PAD_CSI0_DAT13__TPIU_TRACE_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 (_MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT14__GPIO6_0 (_MX53_PAD_CSI0_DAT14__GPIO6_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT14__UART5_TXD_MUX (_MX53_PAD_CSI0_DAT14__UART5_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 (_MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 (_MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43 (_MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT14__TPIU_TRACE_11 (_MX53_PAD_CSI0_DAT14__TPIU_TRACE_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 (_MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT15__GPIO6_1 (_MX53_PAD_CSI0_DAT15__GPIO6_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT15__UART5_RXD_MUX (_MX53_PAD_CSI0_DAT15__UART5_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 (_MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 (_MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44 (_MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT15__TPIU_TRACE_12 (_MX53_PAD_CSI0_DAT15__TPIU_TRACE_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 (_MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT16__GPIO6_2 (_MX53_PAD_CSI0_DAT16__GPIO6_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT16__UART4_RTS (_MX53_PAD_CSI0_DAT16__UART4_RTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 (_MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 (_MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45 (_MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT16__TPIU_TRACE_13 (_MX53_PAD_CSI0_DAT16__TPIU_TRACE_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 (_MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT17__GPIO6_3 (_MX53_PAD_CSI0_DAT17__GPIO6_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT17__UART4_CTS (_MX53_PAD_CSI0_DAT17__UART4_CTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 (_MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 (_MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46 (_MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT17__TPIU_TRACE_14 (_MX53_PAD_CSI0_DAT17__TPIU_TRACE_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 (_MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT18__GPIO6_4 (_MX53_PAD_CSI0_DAT18__GPIO6_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT18__UART5_RTS (_MX53_PAD_CSI0_DAT18__UART5_RTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 (_MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 (_MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47 (_MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT18__TPIU_TRACE_15 (_MX53_PAD_CSI0_DAT18__TPIU_TRACE_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 (_MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT19__GPIO6_5 (_MX53_PAD_CSI0_DAT19__GPIO6_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT19__UART5_CTS (_MX53_PAD_CSI0_DAT19__UART5_CTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 (_MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 (_MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48 (_MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT19__USBPHY2_BISTOK (_MX53_PAD_CSI0_DAT19__USBPHY2_BISTOK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A25__EMI_WEIM_A_25 (_MX53_PAD_EIM_A25__EMI_WEIM_A_25 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A25__GPIO5_2 (_MX53_PAD_EIM_A25__GPIO5_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A25__ECSPI2_RDY (_MX53_PAD_EIM_A25__ECSPI2_RDY | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A25__IPU_DI1_PIN12 (_MX53_PAD_EIM_A25__IPU_DI1_PIN12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A25__CSPI_SS1 (_MX53_PAD_EIM_A25__CSPI_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A25__IPU_DI0_D1_CS (_MX53_PAD_EIM_A25__IPU_DI0_D1_CS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A25__USBPHY1_BISTOK (_MX53_PAD_EIM_A25__USBPHY1_BISTOK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB2__EMI_WEIM_EB_2 (_MX53_PAD_EIM_EB2__EMI_WEIM_EB_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB2__GPIO2_30 (_MX53_PAD_EIM_EB2__GPIO2_30 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK (_MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS (_MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB2__ECSPI1_SS0 (_MX53_PAD_EIM_EB2__ECSPI1_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB2__I2C2_SCL (_MX53_PAD_EIM_EB2__I2C2_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D16__EMI_WEIM_D_16 (_MX53_PAD_EIM_D16__EMI_WEIM_D_16 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D16__GPIO3_16 (_MX53_PAD_EIM_D16__GPIO3_16 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D16__IPU_DI0_PIN5 (_MX53_PAD_EIM_D16__IPU_DI0_PIN5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK (_MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D16__ECSPI1_SCLK (_MX53_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D16__I2C2_SDA (_MX53_PAD_EIM_D16__I2C2_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D17__EMI_WEIM_D_17 (_MX53_PAD_EIM_D17__EMI_WEIM_D_17 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D17__GPIO3_17 (_MX53_PAD_EIM_D17__GPIO3_17 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D17__IPU_DI0_PIN6 (_MX53_PAD_EIM_D17__IPU_DI0_PIN6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN (_MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D17__ECSPI1_MISO (_MX53_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D17__I2C3_SCL (_MX53_PAD_EIM_D17__I2C3_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D18__EMI_WEIM_D_18 (_MX53_PAD_EIM_D18__EMI_WEIM_D_18 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D18__GPIO3_18 (_MX53_PAD_EIM_D18__GPIO3_18 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D18__IPU_DI0_PIN7 (_MX53_PAD_EIM_D18__IPU_DI0_PIN7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO (_MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D18__ECSPI1_MOSI (_MX53_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D18__I2C3_SDA (_MX53_PAD_EIM_D18__I2C3_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D18__IPU_DI1_D0_CS (_MX53_PAD_EIM_D18__IPU_DI1_D0_CS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D19__EMI_WEIM_D_19 (_MX53_PAD_EIM_D19__EMI_WEIM_D_19 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D19__GPIO3_19 (_MX53_PAD_EIM_D19__GPIO3_19 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D19__IPU_DI0_PIN8 (_MX53_PAD_EIM_D19__IPU_DI0_PIN8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS (_MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D19__ECSPI1_SS1 (_MX53_PAD_EIM_D19__ECSPI1_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D19__EPIT1_EPITO (_MX53_PAD_EIM_D19__EPIT1_EPITO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D19__UART1_CTS (_MX53_PAD_EIM_D19__UART1_CTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D19__USBOH3_USBH2_OC (_MX53_PAD_EIM_D19__USBOH3_USBH2_OC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D20__EMI_WEIM_D_20 (_MX53_PAD_EIM_D20__EMI_WEIM_D_20 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D20__GPIO3_20 (_MX53_PAD_EIM_D20__GPIO3_20 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D20__IPU_DI0_PIN16 (_MX53_PAD_EIM_D20__IPU_DI0_PIN16 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D20__IPU_SER_DISP0_CS (_MX53_PAD_EIM_D20__IPU_SER_DISP0_CS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D20__CSPI_SS0 (_MX53_PAD_EIM_D20__CSPI_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D20__EPIT2_EPITO (_MX53_PAD_EIM_D20__EPIT2_EPITO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D20__UART1_RTS (_MX53_PAD_EIM_D20__UART1_RTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D20__USBOH3_USBH2_PWR (_MX53_PAD_EIM_D20__USBOH3_USBH2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D21__EMI_WEIM_D_21 (_MX53_PAD_EIM_D21__EMI_WEIM_D_21 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D21__GPIO3_21 (_MX53_PAD_EIM_D21__GPIO3_21 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D21__IPU_DI0_PIN17 (_MX53_PAD_EIM_D21__IPU_DI0_PIN17 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK (_MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D21__CSPI_SCLK (_MX53_PAD_EIM_D21__CSPI_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D21__I2C1_SCL (_MX53_PAD_EIM_D21__I2C1_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D21__USBOH3_USBOTG_OC (_MX53_PAD_EIM_D21__USBOH3_USBOTG_OC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D22__EMI_WEIM_D_22 (_MX53_PAD_EIM_D22__EMI_WEIM_D_22 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D22__GPIO3_22 (_MX53_PAD_EIM_D22__GPIO3_22 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D22__IPU_DI0_PIN1 (_MX53_PAD_EIM_D22__IPU_DI0_PIN1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN (_MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D22__CSPI_MISO (_MX53_PAD_EIM_D22__CSPI_MISO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR (_MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D23__EMI_WEIM_D_23 (_MX53_PAD_EIM_D23__EMI_WEIM_D_23 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D23__GPIO3_23 (_MX53_PAD_EIM_D23__GPIO3_23 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D23__UART3_CTS (_MX53_PAD_EIM_D23__UART3_CTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D23__UART1_DCD (_MX53_PAD_EIM_D23__UART1_DCD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D23__IPU_DI0_D0_CS (_MX53_PAD_EIM_D23__IPU_DI0_D0_CS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D23__IPU_DI1_PIN2 (_MX53_PAD_EIM_D23__IPU_DI1_PIN2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D23__IPU_CSI1_DATA_EN (_MX53_PAD_EIM_D23__IPU_CSI1_DATA_EN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D23__IPU_DI1_PIN14 (_MX53_PAD_EIM_D23__IPU_DI1_PIN14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB3__EMI_WEIM_EB_3 (_MX53_PAD_EIM_EB3__EMI_WEIM_EB_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB3__GPIO2_31 (_MX53_PAD_EIM_EB3__GPIO2_31 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB3__UART3_RTS (_MX53_PAD_EIM_EB3__UART3_RTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB3__UART1_RI (_MX53_PAD_EIM_EB3__UART1_RI | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB3__IPU_DI1_PIN3 (_MX53_PAD_EIM_EB3__IPU_DI1_PIN3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC (_MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB3__IPU_DI1_PIN16 (_MX53_PAD_EIM_EB3__IPU_DI1_PIN16 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D24__EMI_WEIM_D_24 (_MX53_PAD_EIM_D24__EMI_WEIM_D_24 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D24__GPIO3_24 (_MX53_PAD_EIM_D24__GPIO3_24 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D24__UART3_TXD_MUX (_MX53_PAD_EIM_D24__UART3_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D24__ECSPI1_SS2 (_MX53_PAD_EIM_D24__ECSPI1_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D24__CSPI_SS2 (_MX53_PAD_EIM_D24__CSPI_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS (_MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D24__ECSPI2_SS2 (_MX53_PAD_EIM_D24__ECSPI2_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D24__UART1_DTR (_MX53_PAD_EIM_D24__UART1_DTR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D25__EMI_WEIM_D_25 (_MX53_PAD_EIM_D25__EMI_WEIM_D_25 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D25__GPIO3_25 (_MX53_PAD_EIM_D25__GPIO3_25 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D25__UART3_RXD_MUX (_MX53_PAD_EIM_D25__UART3_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D25__ECSPI1_SS3 (_MX53_PAD_EIM_D25__ECSPI1_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D25__CSPI_SS3 (_MX53_PAD_EIM_D25__CSPI_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC (_MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D25__ECSPI2_SS3 (_MX53_PAD_EIM_D25__ECSPI2_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D25__UART1_DSR (_MX53_PAD_EIM_D25__UART1_DSR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D26__EMI_WEIM_D_26 (_MX53_PAD_EIM_D26__EMI_WEIM_D_26 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D26__GPIO3_26 (_MX53_PAD_EIM_D26__GPIO3_26 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D26__UART2_TXD_MUX (_MX53_PAD_EIM_D26__UART2_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D26__FIRI_RXD (_MX53_PAD_EIM_D26__FIRI_RXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D26__IPU_CSI0_D_1 (_MX53_PAD_EIM_D26__IPU_CSI0_D_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D26__IPU_DI1_PIN11 (_MX53_PAD_EIM_D26__IPU_DI1_PIN11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D26__IPU_SISG_2 (_MX53_PAD_EIM_D26__IPU_SISG_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 (_MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D27__EMI_WEIM_D_27 (_MX53_PAD_EIM_D27__EMI_WEIM_D_27 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D27__GPIO3_27 (_MX53_PAD_EIM_D27__GPIO3_27 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D27__UART2_RXD_MUX (_MX53_PAD_EIM_D27__UART2_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D27__FIRI_TXD (_MX53_PAD_EIM_D27__FIRI_TXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D27__IPU_CSI0_D_0 (_MX53_PAD_EIM_D27__IPU_CSI0_D_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D27__IPU_DI1_PIN13 (_MX53_PAD_EIM_D27__IPU_DI1_PIN13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D27__IPU_SISG_3 (_MX53_PAD_EIM_D27__IPU_SISG_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 (_MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D28__EMI_WEIM_D_28 (_MX53_PAD_EIM_D28__EMI_WEIM_D_28 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D28__GPIO3_28 (_MX53_PAD_EIM_D28__GPIO3_28 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D28__UART2_CTS (_MX53_PAD_EIM_D28__UART2_CTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO (_MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D28__CSPI_MOSI (_MX53_PAD_EIM_D28__CSPI_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D28__I2C1_SDA (_MX53_PAD_EIM_D28__I2C1_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D28__IPU_EXT_TRIG (_MX53_PAD_EIM_D28__IPU_EXT_TRIG | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D28__IPU_DI0_PIN13 (_MX53_PAD_EIM_D28__IPU_DI0_PIN13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D29__EMI_WEIM_D_29 (_MX53_PAD_EIM_D29__EMI_WEIM_D_29 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D29__GPIO3_29 (_MX53_PAD_EIM_D29__GPIO3_29 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D29__UART2_RTS (_MX53_PAD_EIM_D29__UART2_RTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS (_MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D29__CSPI_SS0 (_MX53_PAD_EIM_D29__CSPI_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D29__IPU_DI1_PIN15 (_MX53_PAD_EIM_D29__IPU_DI1_PIN15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D29__IPU_CSI1_VSYNC (_MX53_PAD_EIM_D29__IPU_CSI1_VSYNC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D29__IPU_DI0_PIN14 (_MX53_PAD_EIM_D29__IPU_DI0_PIN14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D30__EMI_WEIM_D_30 (_MX53_PAD_EIM_D30__EMI_WEIM_D_30 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D30__GPIO3_30 (_MX53_PAD_EIM_D30__GPIO3_30 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D30__UART3_CTS (_MX53_PAD_EIM_D30__UART3_CTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D30__IPU_CSI0_D_3 (_MX53_PAD_EIM_D30__IPU_CSI0_D_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D30__IPU_DI0_PIN11 (_MX53_PAD_EIM_D30__IPU_DI0_PIN11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 (_MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D30__USBOH3_USBH1_OC (_MX53_PAD_EIM_D30__USBOH3_USBH1_OC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D30__USBOH3_USBH2_OC (_MX53_PAD_EIM_D30__USBOH3_USBH2_OC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D31__EMI_WEIM_D_31 (_MX53_PAD_EIM_D31__EMI_WEIM_D_31 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D31__GPIO3_31 (_MX53_PAD_EIM_D31__GPIO3_31 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D31__UART3_RTS (_MX53_PAD_EIM_D31__UART3_RTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D31__IPU_CSI0_D_2 (_MX53_PAD_EIM_D31__IPU_CSI0_D_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D31__IPU_DI0_PIN12 (_MX53_PAD_EIM_D31__IPU_DI0_PIN12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 (_MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D31__USBOH3_USBH1_PWR (_MX53_PAD_EIM_D31__USBOH3_USBH1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D31__USBOH3_USBH2_PWR (_MX53_PAD_EIM_D31__USBOH3_USBH2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A24__EMI_WEIM_A_24 (_MX53_PAD_EIM_A24__EMI_WEIM_A_24 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A24__GPIO5_4 (_MX53_PAD_EIM_A24__GPIO5_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 (_MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A24__IPU_CSI1_D_19 (_MX53_PAD_EIM_A24__IPU_CSI1_D_19 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A24__IPU_SISG_2 (_MX53_PAD_EIM_A24__IPU_SISG_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A24__USBPHY2_BVALID (_MX53_PAD_EIM_A24__USBPHY2_BVALID | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A23__EMI_WEIM_A_23 (_MX53_PAD_EIM_A23__EMI_WEIM_A_23 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A23__GPIO6_6 (_MX53_PAD_EIM_A23__GPIO6_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 (_MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A23__IPU_CSI1_D_18 (_MX53_PAD_EIM_A23__IPU_CSI1_D_18 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A23__IPU_SISG_3 (_MX53_PAD_EIM_A23__IPU_SISG_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A23__USBPHY2_ENDSESSION (_MX53_PAD_EIM_A23__USBPHY2_ENDSESSION | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A22__EMI_WEIM_A_22 (_MX53_PAD_EIM_A22__EMI_WEIM_A_22 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A22__GPIO2_16 (_MX53_PAD_EIM_A22__GPIO2_16 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 (_MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A22__IPU_CSI1_D_17 (_MX53_PAD_EIM_A22__IPU_CSI1_D_17 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A22__SRC_BT_CFG1_7 (_MX53_PAD_EIM_A22__SRC_BT_CFG1_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A21__EMI_WEIM_A_21 (_MX53_PAD_EIM_A21__EMI_WEIM_A_21 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A21__GPIO2_17 (_MX53_PAD_EIM_A21__GPIO2_17 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 (_MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A21__IPU_CSI1_D_16 (_MX53_PAD_EIM_A21__IPU_CSI1_D_16 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A21__SRC_BT_CFG1_6 (_MX53_PAD_EIM_A21__SRC_BT_CFG1_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A20__EMI_WEIM_A_20 (_MX53_PAD_EIM_A20__EMI_WEIM_A_20 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A20__GPIO2_18 (_MX53_PAD_EIM_A20__GPIO2_18 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 (_MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A20__IPU_CSI1_D_15 (_MX53_PAD_EIM_A20__IPU_CSI1_D_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A20__SRC_BT_CFG1_5 (_MX53_PAD_EIM_A20__SRC_BT_CFG1_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A19__EMI_WEIM_A_19 (_MX53_PAD_EIM_A19__EMI_WEIM_A_19 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A19__GPIO2_19 (_MX53_PAD_EIM_A19__GPIO2_19 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 (_MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A19__IPU_CSI1_D_14 (_MX53_PAD_EIM_A19__IPU_CSI1_D_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A19__SRC_BT_CFG1_4 (_MX53_PAD_EIM_A19__SRC_BT_CFG1_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A18__EMI_WEIM_A_18 (_MX53_PAD_EIM_A18__EMI_WEIM_A_18 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A18__GPIO2_20 (_MX53_PAD_EIM_A18__GPIO2_20 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 (_MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A18__IPU_CSI1_D_13 (_MX53_PAD_EIM_A18__IPU_CSI1_D_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A18__SRC_BT_CFG1_3 (_MX53_PAD_EIM_A18__SRC_BT_CFG1_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A17__EMI_WEIM_A_17 (_MX53_PAD_EIM_A17__EMI_WEIM_A_17 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A17__GPIO2_21 (_MX53_PAD_EIM_A17__GPIO2_21 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 (_MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A17__IPU_CSI1_D_12 (_MX53_PAD_EIM_A17__IPU_CSI1_D_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A17__SRC_BT_CFG1_2 (_MX53_PAD_EIM_A17__SRC_BT_CFG1_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A16__EMI_WEIM_A_16 (_MX53_PAD_EIM_A16__EMI_WEIM_A_16 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A16__GPIO2_22 (_MX53_PAD_EIM_A16__GPIO2_22 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK (_MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A16__IPU_CSI1_PIXCLK (_MX53_PAD_EIM_A16__IPU_CSI1_PIXCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_A16__SRC_BT_CFG1_1 (_MX53_PAD_EIM_A16__SRC_BT_CFG1_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_CS0__EMI_WEIM_CS_0 (_MX53_PAD_EIM_CS0__EMI_WEIM_CS_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_CS0__GPIO2_23 (_MX53_PAD_EIM_CS0__GPIO2_23 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_CS0__ECSPI2_SCLK (_MX53_PAD_EIM_CS0__ECSPI2_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_CS0__IPU_DI1_PIN5 (_MX53_PAD_EIM_CS0__IPU_DI1_PIN5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 (_MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_CS1__GPIO2_24 (_MX53_PAD_EIM_CS1__GPIO2_24 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_CS1__ECSPI2_MOSI (_MX53_PAD_EIM_CS1__ECSPI2_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_CS1__IPU_DI1_PIN6 (_MX53_PAD_EIM_CS1__IPU_DI1_PIN6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_OE__EMI_WEIM_OE (_MX53_PAD_EIM_OE__EMI_WEIM_OE | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_OE__GPIO2_25 (_MX53_PAD_EIM_OE__GPIO2_25 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_OE__ECSPI2_MISO (_MX53_PAD_EIM_OE__ECSPI2_MISO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_OE__IPU_DI1_PIN7 (_MX53_PAD_EIM_OE__IPU_DI1_PIN7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_OE__USBPHY2_IDDIG (_MX53_PAD_EIM_OE__USBPHY2_IDDIG | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_RW__EMI_WEIM_RW (_MX53_PAD_EIM_RW__EMI_WEIM_RW | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_RW__GPIO2_26 (_MX53_PAD_EIM_RW__GPIO2_26 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_RW__ECSPI2_SS0 (_MX53_PAD_EIM_RW__ECSPI2_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_RW__IPU_DI1_PIN8 (_MX53_PAD_EIM_RW__IPU_DI1_PIN8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_RW__USBPHY2_HOSTDISCONNECT (_MX53_PAD_EIM_RW__USBPHY2_HOSTDISCONNECT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_LBA__EMI_WEIM_LBA (_MX53_PAD_EIM_LBA__EMI_WEIM_LBA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_LBA__GPIO2_27 (_MX53_PAD_EIM_LBA__GPIO2_27 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_LBA__ECSPI2_SS1 (_MX53_PAD_EIM_LBA__ECSPI2_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_LBA__IPU_DI1_PIN17 (_MX53_PAD_EIM_LBA__IPU_DI1_PIN17 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_LBA__SRC_BT_CFG1_0 (_MX53_PAD_EIM_LBA__SRC_BT_CFG1_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB0__EMI_WEIM_EB_0 (_MX53_PAD_EIM_EB0__EMI_WEIM_EB_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB0__GPIO2_28 (_MX53_PAD_EIM_EB0__GPIO2_28 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 (_MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB0__IPU_CSI1_D_11 (_MX53_PAD_EIM_EB0__IPU_CSI1_D_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB0__GPC_PMIC_RDY (_MX53_PAD_EIM_EB0__GPC_PMIC_RDY | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB0__SRC_BT_CFG2_7 (_MX53_PAD_EIM_EB0__SRC_BT_CFG2_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB1__EMI_WEIM_EB_1 (_MX53_PAD_EIM_EB1__EMI_WEIM_EB_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB1__GPIO2_29 (_MX53_PAD_EIM_EB1__GPIO2_29 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 (_MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB1__IPU_CSI1_D_10 (_MX53_PAD_EIM_EB1__IPU_CSI1_D_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB1__SRC_BT_CFG2_6 (_MX53_PAD_EIM_EB1__SRC_BT_CFG2_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 (_MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA0__GPIO3_0 (_MX53_PAD_EIM_DA0__GPIO3_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 (_MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA0__IPU_CSI1_D_9 (_MX53_PAD_EIM_DA0__IPU_CSI1_D_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA0__SRC_BT_CFG2_5 (_MX53_PAD_EIM_DA0__SRC_BT_CFG2_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 (_MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA1__GPIO3_1 (_MX53_PAD_EIM_DA1__GPIO3_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 (_MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA1__IPU_CSI1_D_8 (_MX53_PAD_EIM_DA1__IPU_CSI1_D_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA1__SRC_BT_CFG2_4 (_MX53_PAD_EIM_DA1__SRC_BT_CFG2_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 (_MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA2__GPIO3_2 (_MX53_PAD_EIM_DA2__GPIO3_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 (_MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA2__IPU_CSI1_D_7 (_MX53_PAD_EIM_DA2__IPU_CSI1_D_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA2__SRC_BT_CFG2_3 (_MX53_PAD_EIM_DA2__SRC_BT_CFG2_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 (_MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA3__GPIO3_3 (_MX53_PAD_EIM_DA3__GPIO3_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 (_MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA3__IPU_CSI1_D_6 (_MX53_PAD_EIM_DA3__IPU_CSI1_D_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA3__SRC_BT_CFG2_2 (_MX53_PAD_EIM_DA3__SRC_BT_CFG2_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 (_MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA4__GPIO3_4 (_MX53_PAD_EIM_DA4__GPIO3_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 (_MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA4__IPU_CSI1_D_5 (_MX53_PAD_EIM_DA4__IPU_CSI1_D_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA4__SRC_BT_CFG3_7 (_MX53_PAD_EIM_DA4__SRC_BT_CFG3_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 (_MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA5__GPIO3_5 (_MX53_PAD_EIM_DA5__GPIO3_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 (_MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA5__IPU_CSI1_D_4 (_MX53_PAD_EIM_DA5__IPU_CSI1_D_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA5__SRC_BT_CFG3_6 (_MX53_PAD_EIM_DA5__SRC_BT_CFG3_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 (_MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA6__GPIO3_6 (_MX53_PAD_EIM_DA6__GPIO3_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 (_MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA6__IPU_CSI1_D_3 (_MX53_PAD_EIM_DA6__IPU_CSI1_D_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA6__SRC_BT_CFG3_5 (_MX53_PAD_EIM_DA6__SRC_BT_CFG3_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7 (_MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA7__GPIO3_7 (_MX53_PAD_EIM_DA7__GPIO3_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 (_MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA7__IPU_CSI1_D_2 (_MX53_PAD_EIM_DA7__IPU_CSI1_D_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA7__SRC_BT_CFG3_4 (_MX53_PAD_EIM_DA7__SRC_BT_CFG3_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8 (_MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA8__GPIO3_8 (_MX53_PAD_EIM_DA8__GPIO3_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 (_MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA8__IPU_CSI1_D_1 (_MX53_PAD_EIM_DA8__IPU_CSI1_D_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA8__SRC_BT_CFG3_3 (_MX53_PAD_EIM_DA8__SRC_BT_CFG3_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9 (_MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA9__GPIO3_9 (_MX53_PAD_EIM_DA9__GPIO3_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 (_MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA9__IPU_CSI1_D_0 (_MX53_PAD_EIM_DA9__IPU_CSI1_D_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA9__SRC_BT_CFG3_2 (_MX53_PAD_EIM_DA9__SRC_BT_CFG3_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10 (_MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA10__GPIO3_10 (_MX53_PAD_EIM_DA10__GPIO3_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA10__IPU_DI1_PIN15 (_MX53_PAD_EIM_DA10__IPU_DI1_PIN15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA10__IPU_CSI1_DATA_EN (_MX53_PAD_EIM_DA10__IPU_CSI1_DATA_EN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA10__SRC_BT_CFG3_1 (_MX53_PAD_EIM_DA10__SRC_BT_CFG3_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11 (_MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA11__GPIO3_11 (_MX53_PAD_EIM_DA11__GPIO3_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA11__IPU_DI1_PIN2 (_MX53_PAD_EIM_DA11__IPU_DI1_PIN2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA11__IPU_CSI1_HSYNC (_MX53_PAD_EIM_DA11__IPU_CSI1_HSYNC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12 (_MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA12__GPIO3_12 (_MX53_PAD_EIM_DA12__GPIO3_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA12__IPU_DI1_PIN3 (_MX53_PAD_EIM_DA12__IPU_DI1_PIN3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA12__IPU_CSI1_VSYNC (_MX53_PAD_EIM_DA12__IPU_CSI1_VSYNC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13 (_MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA13__GPIO3_13 (_MX53_PAD_EIM_DA13__GPIO3_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA13__IPU_DI1_D0_CS (_MX53_PAD_EIM_DA13__IPU_DI1_D0_CS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA13__CCM_DI1_EXT_CLK (_MX53_PAD_EIM_DA13__CCM_DI1_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14 (_MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA14__GPIO3_14 (_MX53_PAD_EIM_DA14__GPIO3_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA14__IPU_DI1_D1_CS (_MX53_PAD_EIM_DA14__IPU_DI1_D1_CS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA14__CCM_DI0_EXT_CLK (_MX53_PAD_EIM_DA14__CCM_DI0_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15 (_MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA15__GPIO3_15 (_MX53_PAD_EIM_DA15__GPIO3_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA15__IPU_DI1_PIN1 (_MX53_PAD_EIM_DA15__IPU_DI1_PIN1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_DA15__IPU_DI1_PIN4 (_MX53_PAD_EIM_DA15__IPU_DI1_PIN4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B (_MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_WE_B__GPIO6_12 (_MX53_PAD_NANDF_WE_B__GPIO6_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B (_MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_RE_B__GPIO6_13 (_MX53_PAD_NANDF_RE_B__GPIO6_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT (_MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_WAIT__GPIO5_0 (_MX53_PAD_EIM_WAIT__GPIO5_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_WAIT__EMI_WEIM_DTACK_B (_MX53_PAD_EIM_WAIT__EMI_WEIM_DTACK_B | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_LVDS1_TX3_P__GPIO6_22 (_MX53_PAD_LVDS1_TX3_P__GPIO6_22 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 (_MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_LVDS1_TX2_P__GPIO6_24 (_MX53_PAD_LVDS1_TX2_P__GPIO6_24 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 (_MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_LVDS1_CLK_P__GPIO6_26 (_MX53_PAD_LVDS1_CLK_P__GPIO6_26 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK (_MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_LVDS1_TX1_P__GPIO6_28 (_MX53_PAD_LVDS1_TX1_P__GPIO6_28 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 (_MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_LVDS1_TX0_P__GPIO6_30 (_MX53_PAD_LVDS1_TX0_P__GPIO6_30 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 (_MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_LVDS0_TX3_P__GPIO7_22 (_MX53_PAD_LVDS0_TX3_P__GPIO7_22 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 (_MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_LVDS0_CLK_P__GPIO7_24 (_MX53_PAD_LVDS0_CLK_P__GPIO7_24 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK (_MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_LVDS0_TX2_P__GPIO7_26 (_MX53_PAD_LVDS0_TX2_P__GPIO7_26 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 (_MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_LVDS0_TX1_P__GPIO7_28 (_MX53_PAD_LVDS0_TX1_P__GPIO7_28 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 (_MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_LVDS0_TX0_P__GPIO7_30 (_MX53_PAD_LVDS0_TX0_P__GPIO7_30 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 (_MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_10__GPIO4_0 (_MX53_PAD_GPIO_10__GPIO4_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_10__OSC32k_32K_OUT (_MX53_PAD_GPIO_10__OSC32k_32K_OUT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_11__GPIO4_1 (_MX53_PAD_GPIO_11__GPIO4_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_12__GPIO4_2 (_MX53_PAD_GPIO_12__GPIO4_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_13__GPIO4_3 (_MX53_PAD_GPIO_13__GPIO4_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_14__GPIO4_4 (_MX53_PAD_GPIO_14__GPIO4_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CLE__EMI_NANDF_CLE (_MX53_PAD_NANDF_CLE__EMI_NANDF_CLE | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CLE__GPIO6_7 (_MX53_PAD_NANDF_CLE__GPIO6_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CLE__USBPHY1_VSTATUS_0 (_MX53_PAD_NANDF_CLE__USBPHY1_VSTATUS_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_ALE__EMI_NANDF_ALE (_MX53_PAD_NANDF_ALE__EMI_NANDF_ALE | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_ALE__GPIO6_8 (_MX53_PAD_NANDF_ALE__GPIO6_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_ALE__USBPHY1_VSTATUS_1 (_MX53_PAD_NANDF_ALE__USBPHY1_VSTATUS_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B (_MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_WP_B__GPIO6_9 (_MX53_PAD_NANDF_WP_B__GPIO6_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_WP_B__USBPHY1_VSTATUS_2 (_MX53_PAD_NANDF_WP_B__USBPHY1_VSTATUS_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 (_MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_RB0__GPIO6_10 (_MX53_PAD_NANDF_RB0__GPIO6_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_RB0__USBPHY1_VSTATUS_3 (_MX53_PAD_NANDF_RB0__USBPHY1_VSTATUS_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 (_MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS0__GPIO6_11 (_MX53_PAD_NANDF_CS0__GPIO6_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS0__USBPHY1_VSTATUS_4 (_MX53_PAD_NANDF_CS0__USBPHY1_VSTATUS_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1 (_MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS1__GPIO6_14 (_MX53_PAD_NANDF_CS1__GPIO6_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS1__MLB_MLBCLK (_MX53_PAD_NANDF_CS1__MLB_MLBCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS1__USBPHY1_VSTATUS_5 (_MX53_PAD_NANDF_CS1__USBPHY1_VSTATUS_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2 (_MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS2__GPIO6_15 (_MX53_PAD_NANDF_CS2__GPIO6_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS2__IPU_SISG_0 (_MX53_PAD_NANDF_CS2__IPU_SISG_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS2__ESAI1_TX0 (_MX53_PAD_NANDF_CS2__ESAI1_TX0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS2__EMI_WEIM_CRE (_MX53_PAD_NANDF_CS2__EMI_WEIM_CRE | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK (_MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS2__MLB_MLBSIG (_MX53_PAD_NANDF_CS2__MLB_MLBSIG | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS2__USBPHY1_VSTATUS_6 (_MX53_PAD_NANDF_CS2__USBPHY1_VSTATUS_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3 (_MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS3__GPIO6_16 (_MX53_PAD_NANDF_CS3__GPIO6_16 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS3__IPU_SISG_1 (_MX53_PAD_NANDF_CS3__IPU_SISG_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS3__ESAI1_TX1 (_MX53_PAD_NANDF_CS3__ESAI1_TX1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS3__EMI_WEIM_A_26 (_MX53_PAD_NANDF_CS3__EMI_WEIM_A_26 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS3__MLB_MLBDAT (_MX53_PAD_NANDF_CS3__MLB_MLBDAT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_NANDF_CS3__USBPHY1_VSTATUS_7 (_MX53_PAD_NANDF_CS3__USBPHY1_VSTATUS_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_MDIO__FEC_MDIO (_MX53_PAD_FEC_MDIO__FEC_MDIO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_MDIO__GPIO1_22 (_MX53_PAD_FEC_MDIO__GPIO1_22 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_MDIO__ESAI1_SCKR (_MX53_PAD_FEC_MDIO__ESAI1_SCKR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_MDIO__FEC_COL (_MX53_PAD_FEC_MDIO__FEC_COL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_MDIO__RTC_CE_RTC_PS2 (_MX53_PAD_FEC_MDIO__RTC_CE_RTC_PS2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_MDIO__SDMA_DEBUG_BUS_DEVICE_3 (_MX53_PAD_FEC_MDIO__SDMA_DEBUG_BUS_DEVICE_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_MDIO__EMI_EMI_DEBUG_49 (_MX53_PAD_FEC_MDIO__EMI_EMI_DEBUG_49 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_REF_CLK__FEC_TX_CLK (_MX53_PAD_FEC_REF_CLK__FEC_TX_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_REF_CLK__GPIO1_23 (_MX53_PAD_FEC_REF_CLK__GPIO1_23 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_REF_CLK__ESAI1_FSR (_MX53_PAD_FEC_REF_CLK__ESAI1_FSR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4 (_MX53_PAD_FEC_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_REF_CLK__EMI_EMI_DEBUG_50 (_MX53_PAD_FEC_REF_CLK__EMI_EMI_DEBUG_50 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_RX_ER__FEC_RX_ER (_MX53_PAD_FEC_RX_ER__FEC_RX_ER | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_RX_ER__GPIO1_24 (_MX53_PAD_FEC_RX_ER__GPIO1_24 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_RX_ER__ESAI1_HCKR (_MX53_PAD_FEC_RX_ER__ESAI1_HCKR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_RX_ER__FEC_RX_CLK (_MX53_PAD_FEC_RX_ER__FEC_RX_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_RX_ER__RTC_CE_RTC_PS3 (_MX53_PAD_FEC_RX_ER__RTC_CE_RTC_PS3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_CRS_DV__FEC_RX_DV (_MX53_PAD_FEC_CRS_DV__FEC_RX_DV | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_CRS_DV__GPIO1_25 (_MX53_PAD_FEC_CRS_DV__GPIO1_25 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_CRS_DV__ESAI1_SCKT (_MX53_PAD_FEC_CRS_DV__ESAI1_SCKT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_RXD1__FEC_RDATA_1 (_MX53_PAD_FEC_RXD1__FEC_RDATA_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_RXD1__GPIO1_26 (_MX53_PAD_FEC_RXD1__GPIO1_26 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_RXD1__ESAI1_FST (_MX53_PAD_FEC_RXD1__ESAI1_FST | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_RXD1__MLB_MLBSIG (_MX53_PAD_FEC_RXD1__MLB_MLBSIG | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_RXD1__RTC_CE_RTC_PS1 (_MX53_PAD_FEC_RXD1__RTC_CE_RTC_PS1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_RXD0__FEC_RDATA_0 (_MX53_PAD_FEC_RXD0__FEC_RDATA_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_RXD0__GPIO1_27 (_MX53_PAD_FEC_RXD0__GPIO1_27 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_RXD0__ESAI1_HCKT (_MX53_PAD_FEC_RXD0__ESAI1_HCKT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_RXD0__OSC32k_32K_OUT (_MX53_PAD_FEC_RXD0__OSC32k_32K_OUT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_TX_EN__FEC_TX_EN (_MX53_PAD_FEC_TX_EN__FEC_TX_EN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_TX_EN__GPIO1_28 (_MX53_PAD_FEC_TX_EN__GPIO1_28 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_TX_EN__ESAI1_TX3_RX2 (_MX53_PAD_FEC_TX_EN__ESAI1_TX3_RX2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_TXD1__FEC_TDATA_1 (_MX53_PAD_FEC_TXD1__FEC_TDATA_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_TXD1__GPIO1_29 (_MX53_PAD_FEC_TXD1__GPIO1_29 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_TXD1__ESAI1_TX2_RX3 (_MX53_PAD_FEC_TXD1__ESAI1_TX2_RX3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_TXD1__MLB_MLBCLK (_MX53_PAD_FEC_TXD1__MLB_MLBCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_TXD1__RTC_CE_RTC_PRSC_CLK (_MX53_PAD_FEC_TXD1__RTC_CE_RTC_PRSC_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_TXD0__FEC_TDATA_0 (_MX53_PAD_FEC_TXD0__FEC_TDATA_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_TXD0__GPIO1_30 (_MX53_PAD_FEC_TXD0__GPIO1_30 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_TXD0__ESAI1_TX4_RX1 (_MX53_PAD_FEC_TXD0__ESAI1_TX4_RX1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_TXD0__USBPHY2_DATAOUT_0 (_MX53_PAD_FEC_TXD0__USBPHY2_DATAOUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_MDC__FEC_MDC (_MX53_PAD_FEC_MDC__FEC_MDC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_MDC__GPIO1_31 (_MX53_PAD_FEC_MDC__GPIO1_31 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_MDC__ESAI1_TX5_RX0 (_MX53_PAD_FEC_MDC__ESAI1_TX5_RX0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_MDC__MLB_MLBDAT (_MX53_PAD_FEC_MDC__MLB_MLBDAT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_MDC__RTC_CE_RTC_ALARM1_TRIG (_MX53_PAD_FEC_MDC__RTC_CE_RTC_ALARM1_TRIG | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1 (_MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DIOW__PATA_DIOW (_MX53_PAD_PATA_DIOW__PATA_DIOW | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DIOW__GPIO6_17 (_MX53_PAD_PATA_DIOW__GPIO6_17 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DIOW__UART1_TXD_MUX (_MX53_PAD_PATA_DIOW__UART1_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) +#define MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2 (_MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DMACK__PATA_DMACK (_MX53_PAD_PATA_DMACK__PATA_DMACK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DMACK__GPIO6_18 (_MX53_PAD_PATA_DMACK__GPIO6_18 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DMACK__UART1_RXD_MUX (_MX53_PAD_PATA_DMACK__UART1_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) +#define MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3 (_MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DMARQ__PATA_DMARQ (_MX53_PAD_PATA_DMARQ__PATA_DMARQ | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DMARQ__GPIO7_0 (_MX53_PAD_PATA_DMARQ__GPIO7_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DMARQ__UART2_TXD_MUX (_MX53_PAD_PATA_DMARQ__UART2_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) +#define MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0 (_MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4 (_MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN (_MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_BUFFER_EN__GPIO7_1 (_MX53_PAD_PATA_BUFFER_EN__GPIO7_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX (_MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) +#define MX53_PAD_PATA_BUFFER_EN__CCM_CCM_OUT_1 (_MX53_PAD_PATA_BUFFER_EN__CCM_CCM_OUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5 (_MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_INTRQ__PATA_INTRQ (_MX53_PAD_PATA_INTRQ__PATA_INTRQ | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_INTRQ__GPIO7_2 (_MX53_PAD_PATA_INTRQ__GPIO7_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_INTRQ__UART2_CTS (_MX53_PAD_PATA_INTRQ__UART2_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) +#define MX53_PAD_PATA_INTRQ__CAN1_TXCAN (_MX53_PAD_PATA_INTRQ__CAN1_TXCAN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2 (_MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6 (_MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DIOR__PATA_DIOR (_MX53_PAD_PATA_DIOR__PATA_DIOR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DIOR__GPIO7_3 (_MX53_PAD_PATA_DIOR__GPIO7_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DIOR__UART2_RTS (_MX53_PAD_PATA_DIOR__UART2_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) +#define MX53_PAD_PATA_DIOR__CAN1_RXCAN (_MX53_PAD_PATA_DIOR__CAN1_RXCAN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7 (_MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B (_MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_RESET_B__GPIO7_4 (_MX53_PAD_PATA_RESET_B__GPIO7_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_RESET_B__ESDHC3_CMD (_MX53_PAD_PATA_RESET_B__ESDHC3_CMD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_RESET_B__UART1_CTS (_MX53_PAD_PATA_RESET_B__UART1_CTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_RESET_B__CAN2_TXCAN (_MX53_PAD_PATA_RESET_B__CAN2_TXCAN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0 (_MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_IORDY__PATA_IORDY (_MX53_PAD_PATA_IORDY__PATA_IORDY | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_IORDY__GPIO7_5 (_MX53_PAD_PATA_IORDY__GPIO7_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_IORDY__ESDHC3_CLK (_MX53_PAD_PATA_IORDY__ESDHC3_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_IORDY__UART1_RTS (_MX53_PAD_PATA_IORDY__UART1_RTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_IORDY__CAN2_RXCAN (_MX53_PAD_PATA_IORDY__CAN2_RXCAN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1 (_MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DA_0__PATA_DA_0 (_MX53_PAD_PATA_DA_0__PATA_DA_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DA_0__GPIO7_6 (_MX53_PAD_PATA_DA_0__GPIO7_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DA_0__ESDHC3_RST (_MX53_PAD_PATA_DA_0__ESDHC3_RST | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DA_0__OWIRE_LINE (_MX53_PAD_PATA_DA_0__OWIRE_LINE | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2 (_MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DA_1__PATA_DA_1 (_MX53_PAD_PATA_DA_1__PATA_DA_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DA_1__GPIO7_7 (_MX53_PAD_PATA_DA_1__GPIO7_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DA_1__ESDHC4_CMD (_MX53_PAD_PATA_DA_1__ESDHC4_CMD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DA_1__UART3_CTS (_MX53_PAD_PATA_DA_1__UART3_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) +#define MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3 (_MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DA_2__PATA_DA_2 (_MX53_PAD_PATA_DA_2__PATA_DA_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DA_2__GPIO7_8 (_MX53_PAD_PATA_DA_2__GPIO7_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DA_2__ESDHC4_CLK (_MX53_PAD_PATA_DA_2__ESDHC4_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DA_2__UART3_RTS (_MX53_PAD_PATA_DA_2__UART3_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) +#define MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4 (_MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_CS_0__PATA_CS_0 (_MX53_PAD_PATA_CS_0__PATA_CS_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_CS_0__GPIO7_9 (_MX53_PAD_PATA_CS_0__GPIO7_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_CS_0__UART3_TXD_MUX (_MX53_PAD_PATA_CS_0__UART3_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) +#define MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5 (_MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_CS_1__PATA_CS_1 (_MX53_PAD_PATA_CS_1__PATA_CS_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_CS_1__GPIO7_10 (_MX53_PAD_PATA_CS_1__GPIO7_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_CS_1__UART3_RXD_MUX (_MX53_PAD_PATA_CS_1__UART3_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) +#define MX53_PAD_PATA_CS_1__USBPHY1_DATAOUT_6 (_MX53_PAD_PATA_CS_1__USBPHY1_DATAOUT_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA0__PATA_DATA_0 (_MX53_PAD_PATA_DATA0__PATA_DATA_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA0__GPIO2_0 (_MX53_PAD_PATA_DATA0__GPIO2_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 (_MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA0__ESDHC3_DAT4 (_MX53_PAD_PATA_DATA0__ESDHC3_DAT4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0 (_MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0 (_MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7 (_MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA1__PATA_DATA_1 (_MX53_PAD_PATA_DATA1__PATA_DATA_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA1__GPIO2_1 (_MX53_PAD_PATA_DATA1__GPIO2_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 (_MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA1__ESDHC3_DAT5 (_MX53_PAD_PATA_DATA1__ESDHC3_DAT5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1 (_MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1 (_MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA2__PATA_DATA_2 (_MX53_PAD_PATA_DATA2__PATA_DATA_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA2__GPIO2_2 (_MX53_PAD_PATA_DATA2__GPIO2_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 (_MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA2__ESDHC3_DAT6 (_MX53_PAD_PATA_DATA2__ESDHC3_DAT6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2 (_MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2 (_MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA3__PATA_DATA_3 (_MX53_PAD_PATA_DATA3__PATA_DATA_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA3__GPIO2_3 (_MX53_PAD_PATA_DATA3__GPIO2_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 (_MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA3__ESDHC3_DAT7 (_MX53_PAD_PATA_DATA3__ESDHC3_DAT7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3 (_MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3 (_MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA4__PATA_DATA_4 (_MX53_PAD_PATA_DATA4__PATA_DATA_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA4__GPIO2_4 (_MX53_PAD_PATA_DATA4__GPIO2_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 (_MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA4__ESDHC4_DAT4 (_MX53_PAD_PATA_DATA4__ESDHC4_DAT4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4 (_MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4 (_MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA5__PATA_DATA_5 (_MX53_PAD_PATA_DATA5__PATA_DATA_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA5__GPIO2_5 (_MX53_PAD_PATA_DATA5__GPIO2_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 (_MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA5__ESDHC4_DAT5 (_MX53_PAD_PATA_DATA5__ESDHC4_DAT5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5 (_MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5 (_MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA6__PATA_DATA_6 (_MX53_PAD_PATA_DATA6__PATA_DATA_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA6__GPIO2_6 (_MX53_PAD_PATA_DATA6__GPIO2_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 (_MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA6__ESDHC4_DAT6 (_MX53_PAD_PATA_DATA6__ESDHC4_DAT6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6 (_MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6 (_MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA7__PATA_DATA_7 (_MX53_PAD_PATA_DATA7__PATA_DATA_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA7__GPIO2_7 (_MX53_PAD_PATA_DATA7__GPIO2_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 (_MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA7__ESDHC4_DAT7 (_MX53_PAD_PATA_DATA7__ESDHC4_DAT7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7 (_MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7 (_MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA8__PATA_DATA_8 (_MX53_PAD_PATA_DATA8__PATA_DATA_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA8__GPIO2_8 (_MX53_PAD_PATA_DATA8__GPIO2_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA8__ESDHC1_DAT4 (_MX53_PAD_PATA_DATA8__ESDHC1_DAT4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA8__EMI_NANDF_D_8 (_MX53_PAD_PATA_DATA8__EMI_NANDF_D_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA8__ESDHC3_DAT0 (_MX53_PAD_PATA_DATA8__ESDHC3_DAT0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8 (_MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8 (_MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA9__PATA_DATA_9 (_MX53_PAD_PATA_DATA9__PATA_DATA_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA9__GPIO2_9 (_MX53_PAD_PATA_DATA9__GPIO2_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA9__ESDHC1_DAT5 (_MX53_PAD_PATA_DATA9__ESDHC1_DAT5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA9__EMI_NANDF_D_9 (_MX53_PAD_PATA_DATA9__EMI_NANDF_D_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA9__ESDHC3_DAT1 (_MX53_PAD_PATA_DATA9__ESDHC3_DAT1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9 (_MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9 (_MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA10__PATA_DATA_10 (_MX53_PAD_PATA_DATA10__PATA_DATA_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA10__GPIO2_10 (_MX53_PAD_PATA_DATA10__GPIO2_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA10__ESDHC1_DAT6 (_MX53_PAD_PATA_DATA10__ESDHC1_DAT6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA10__EMI_NANDF_D_10 (_MX53_PAD_PATA_DATA10__EMI_NANDF_D_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA10__ESDHC3_DAT2 (_MX53_PAD_PATA_DATA10__ESDHC3_DAT2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10 (_MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10 (_MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA11__PATA_DATA_11 (_MX53_PAD_PATA_DATA11__PATA_DATA_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA11__GPIO2_11 (_MX53_PAD_PATA_DATA11__GPIO2_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA11__ESDHC1_DAT7 (_MX53_PAD_PATA_DATA11__ESDHC1_DAT7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA11__EMI_NANDF_D_11 (_MX53_PAD_PATA_DATA11__EMI_NANDF_D_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA11__ESDHC3_DAT3 (_MX53_PAD_PATA_DATA11__ESDHC3_DAT3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11 (_MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11 (_MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA12__PATA_DATA_12 (_MX53_PAD_PATA_DATA12__PATA_DATA_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA12__GPIO2_12 (_MX53_PAD_PATA_DATA12__GPIO2_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA12__ESDHC2_DAT4 (_MX53_PAD_PATA_DATA12__ESDHC2_DAT4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA12__EMI_NANDF_D_12 (_MX53_PAD_PATA_DATA12__EMI_NANDF_D_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA12__ESDHC4_DAT0 (_MX53_PAD_PATA_DATA12__ESDHC4_DAT0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12 (_MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12 (_MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA13__PATA_DATA_13 (_MX53_PAD_PATA_DATA13__PATA_DATA_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA13__GPIO2_13 (_MX53_PAD_PATA_DATA13__GPIO2_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA13__ESDHC2_DAT5 (_MX53_PAD_PATA_DATA13__ESDHC2_DAT5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA13__EMI_NANDF_D_13 (_MX53_PAD_PATA_DATA13__EMI_NANDF_D_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA13__ESDHC4_DAT1 (_MX53_PAD_PATA_DATA13__ESDHC4_DAT1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13 (_MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13 (_MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA14__PATA_DATA_14 (_MX53_PAD_PATA_DATA14__PATA_DATA_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA14__GPIO2_14 (_MX53_PAD_PATA_DATA14__GPIO2_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA14__ESDHC2_DAT6 (_MX53_PAD_PATA_DATA14__ESDHC2_DAT6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA14__EMI_NANDF_D_14 (_MX53_PAD_PATA_DATA14__EMI_NANDF_D_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA14__ESDHC4_DAT2 (_MX53_PAD_PATA_DATA14__ESDHC4_DAT2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14 (_MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14 (_MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA15__PATA_DATA_15 (_MX53_PAD_PATA_DATA15__PATA_DATA_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA15__GPIO2_15 (_MX53_PAD_PATA_DATA15__GPIO2_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA15__ESDHC2_DAT7 (_MX53_PAD_PATA_DATA15__ESDHC2_DAT7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA15__EMI_NANDF_D_15 (_MX53_PAD_PATA_DATA15__EMI_NANDF_D_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA15__ESDHC4_DAT3 (_MX53_PAD_PATA_DATA15__ESDHC4_DAT3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15 (_MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15 (_MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA0__ESDHC1_DAT0 (_MX53_PAD_SD1_DATA0__ESDHC1_DAT0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA0__GPIO1_16 (_MX53_PAD_SD1_DATA0__GPIO1_16 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA0__GPT_CAPIN1 (_MX53_PAD_SD1_DATA0__GPT_CAPIN1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA0__CSPI_MISO (_MX53_PAD_SD1_DATA0__CSPI_MISO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA0__CCM_PLL3_BYP (_MX53_PAD_SD1_DATA0__CCM_PLL3_BYP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA1__ESDHC1_DAT1 (_MX53_PAD_SD1_DATA1__ESDHC1_DAT1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA1__GPIO1_17 (_MX53_PAD_SD1_DATA1__GPIO1_17 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA1__GPT_CAPIN2 (_MX53_PAD_SD1_DATA1__GPT_CAPIN2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA1__CSPI_SS0 (_MX53_PAD_SD1_DATA1__CSPI_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA1__CCM_PLL4_BYP (_MX53_PAD_SD1_DATA1__CCM_PLL4_BYP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_CMD__ESDHC1_CMD (_MX53_PAD_SD1_CMD__ESDHC1_CMD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_CMD__GPIO1_18 (_MX53_PAD_SD1_CMD__GPIO1_18 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_CMD__GPT_CMPOUT1 (_MX53_PAD_SD1_CMD__GPT_CMPOUT1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_CMD__CSPI_MOSI (_MX53_PAD_SD1_CMD__CSPI_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_CMD__CCM_PLL1_BYP (_MX53_PAD_SD1_CMD__CCM_PLL1_BYP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA2__ESDHC1_DAT2 (_MX53_PAD_SD1_DATA2__ESDHC1_DAT2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA2__GPIO1_19 (_MX53_PAD_SD1_DATA2__GPIO1_19 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA2__GPT_CMPOUT2 (_MX53_PAD_SD1_DATA2__GPT_CMPOUT2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA2__PWM2_PWMO (_MX53_PAD_SD1_DATA2__PWM2_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_B (_MX53_PAD_SD1_DATA2__WDOG1_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA2__CSPI_SS1 (_MX53_PAD_SD1_DATA2__CSPI_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB (_MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA2__CCM_PLL2_BYP (_MX53_PAD_SD1_DATA2__CCM_PLL2_BYP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_CLK__ESDHC1_CLK (_MX53_PAD_SD1_CLK__ESDHC1_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_CLK__GPIO1_20 (_MX53_PAD_SD1_CLK__GPIO1_20 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_CLK__OSC32k_32K_OUT (_MX53_PAD_SD1_CLK__OSC32k_32K_OUT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_CLK__GPT_CLKIN (_MX53_PAD_SD1_CLK__GPT_CLKIN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_CLK__CSPI_SCLK (_MX53_PAD_SD1_CLK__CSPI_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_CLK__SATA_PHY_DTB_0 (_MX53_PAD_SD1_CLK__SATA_PHY_DTB_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA3__ESDHC1_DAT3 (_MX53_PAD_SD1_DATA3__ESDHC1_DAT3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA3__GPIO1_21 (_MX53_PAD_SD1_DATA3__GPIO1_21 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA3__GPT_CMPOUT3 (_MX53_PAD_SD1_DATA3__GPT_CMPOUT3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA3__PWM1_PWMO (_MX53_PAD_SD1_DATA3__PWM1_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_B (_MX53_PAD_SD1_DATA3__WDOG2_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA3__CSPI_SS2 (_MX53_PAD_SD1_DATA3__CSPI_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB (_MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1 (_MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_CLK__ESDHC2_CLK (_MX53_PAD_SD2_CLK__ESDHC2_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_CLK__GPIO1_10 (_MX53_PAD_SD2_CLK__GPIO1_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_CLK__KPP_COL_5 (_MX53_PAD_SD2_CLK__KPP_COL_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS (_MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_CLK__CSPI_SCLK (_MX53_PAD_SD2_CLK__CSPI_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_CLK__SCC_RANDOM_V (_MX53_PAD_SD2_CLK__SCC_RANDOM_V | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_CMD__ESDHC2_CMD (_MX53_PAD_SD2_CMD__ESDHC2_CMD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_CMD__GPIO1_11 (_MX53_PAD_SD2_CMD__GPIO1_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_CMD__KPP_ROW_5 (_MX53_PAD_SD2_CMD__KPP_ROW_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC (_MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_CMD__CSPI_MOSI (_MX53_PAD_SD2_CMD__CSPI_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_CMD__SCC_RANDOM (_MX53_PAD_SD2_CMD__SCC_RANDOM | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA3__ESDHC2_DAT3 (_MX53_PAD_SD2_DATA3__ESDHC2_DAT3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA3__GPIO1_12 (_MX53_PAD_SD2_DATA3__GPIO1_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA3__KPP_COL_6 (_MX53_PAD_SD2_DATA3__KPP_COL_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC (_MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA3__CSPI_SS2 (_MX53_PAD_SD2_DATA3__CSPI_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA3__SJC_DONE (_MX53_PAD_SD2_DATA3__SJC_DONE | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA2__ESDHC2_DAT2 (_MX53_PAD_SD2_DATA2__ESDHC2_DAT2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA2__GPIO1_13 (_MX53_PAD_SD2_DATA2__GPIO1_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA2__KPP_ROW_6 (_MX53_PAD_SD2_DATA2__KPP_ROW_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD (_MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA2__CSPI_SS1 (_MX53_PAD_SD2_DATA2__CSPI_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA2__SJC_FAIL (_MX53_PAD_SD2_DATA2__SJC_FAIL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA1__ESDHC2_DAT1 (_MX53_PAD_SD2_DATA1__ESDHC2_DAT1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA1__GPIO1_14 (_MX53_PAD_SD2_DATA1__GPIO1_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA1__KPP_COL_7 (_MX53_PAD_SD2_DATA1__KPP_COL_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS (_MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA1__CSPI_SS0 (_MX53_PAD_SD2_DATA1__CSPI_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA1__RTIC_SEC_VIO (_MX53_PAD_SD2_DATA1__RTIC_SEC_VIO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA0__ESDHC2_DAT0 (_MX53_PAD_SD2_DATA0__ESDHC2_DAT0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA0__GPIO1_15 (_MX53_PAD_SD2_DATA0__GPIO1_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA0__KPP_ROW_7 (_MX53_PAD_SD2_DATA0__KPP_ROW_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD (_MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA0__CSPI_MISO (_MX53_PAD_SD2_DATA0__CSPI_MISO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA0__RTIC_DONE_INT (_MX53_PAD_SD2_DATA0__RTIC_DONE_INT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_0__CCM_CLKO (_MX53_PAD_GPIO_0__CCM_CLKO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_0__GPIO1_0 (_MX53_PAD_GPIO_0__GPIO1_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_0__KPP_COL_5 (_MX53_PAD_GPIO_0__KPP_COL_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK (_MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_0__EPIT1_EPITO (_MX53_PAD_GPIO_0__EPIT1_EPITO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_0__SRTC_ALARM_DEB (_MX53_PAD_GPIO_0__SRTC_ALARM_DEB | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_0__USBOH3_USBH1_PWR (_MX53_PAD_GPIO_0__USBOH3_USBH1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_0__CSU_TD (_MX53_PAD_GPIO_0__CSU_TD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_1__ESAI1_SCKR (_MX53_PAD_GPIO_1__ESAI1_SCKR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_1__GPIO1_1 (_MX53_PAD_GPIO_1__GPIO1_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_1__KPP_ROW_5 (_MX53_PAD_GPIO_1__KPP_ROW_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_1__CCM_SSI_EXT2_CLK (_MX53_PAD_GPIO_1__CCM_SSI_EXT2_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_1__PWM2_PWMO (_MX53_PAD_GPIO_1__PWM2_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_1__WDOG2_WDOG_B (_MX53_PAD_GPIO_1__WDOG2_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_1__ESDHC1_CD (_MX53_PAD_GPIO_1__ESDHC1_CD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_1__SRC_TESTER_ACK (_MX53_PAD_GPIO_1__SRC_TESTER_ACK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_9__ESAI1_FSR (_MX53_PAD_GPIO_9__ESAI1_FSR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_9__GPIO1_9 (_MX53_PAD_GPIO_9__GPIO1_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_9__KPP_COL_6 (_MX53_PAD_GPIO_9__KPP_COL_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_9__CCM_REF_EN_B (_MX53_PAD_GPIO_9__CCM_REF_EN_B | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_9__PWM1_PWMO (_MX53_PAD_GPIO_9__PWM1_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_9__WDOG1_WDOG_B (_MX53_PAD_GPIO_9__WDOG1_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_9__ESDHC1_WP (_MX53_PAD_GPIO_9__ESDHC1_WP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_9__SCC_FAIL_STATE (_MX53_PAD_GPIO_9__SCC_FAIL_STATE | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_3__ESAI1_HCKR (_MX53_PAD_GPIO_3__ESAI1_HCKR | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_3__GPIO1_3 (_MX53_PAD_GPIO_3__GPIO1_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_3__I2C3_SCL (_MX53_PAD_GPIO_3__I2C3_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_3__DPLLIP1_TOG_EN (_MX53_PAD_GPIO_3__DPLLIP1_TOG_EN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_3__CCM_CLKO2 (_MX53_PAD_GPIO_3__CCM_CLKO2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 (_MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_3__USBOH3_USBH1_OC (_MX53_PAD_GPIO_3__USBOH3_USBH1_OC | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_3__MLB_MLBCLK (_MX53_PAD_GPIO_3__MLB_MLBCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_6__ESAI1_SCKT (_MX53_PAD_GPIO_6__ESAI1_SCKT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_6__GPIO1_6 (_MX53_PAD_GPIO_6__GPIO1_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_6__I2C3_SDA (_MX53_PAD_GPIO_6__I2C3_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_6__CCM_CCM_OUT_0 (_MX53_PAD_GPIO_6__CCM_CCM_OUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_6__CSU_CSU_INT_DEB (_MX53_PAD_GPIO_6__CSU_CSU_INT_DEB | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 (_MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_6__ESDHC2_LCTL (_MX53_PAD_GPIO_6__ESDHC2_LCTL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_6__MLB_MLBSIG (_MX53_PAD_GPIO_6__MLB_MLBSIG | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_2__ESAI1_FST (_MX53_PAD_GPIO_2__ESAI1_FST | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_2__GPIO1_2 (_MX53_PAD_GPIO_2__GPIO1_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_2__KPP_ROW_6 (_MX53_PAD_GPIO_2__KPP_ROW_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_2__CCM_CCM_OUT_1 (_MX53_PAD_GPIO_2__CCM_CCM_OUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0 (_MX53_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2 (_MX53_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_2__ESDHC2_WP (_MX53_PAD_GPIO_2__ESDHC2_WP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_2__MLB_MLBDAT (_MX53_PAD_GPIO_2__MLB_MLBDAT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_4__ESAI1_HCKT (_MX53_PAD_GPIO_4__ESAI1_HCKT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_4__GPIO1_4 (_MX53_PAD_GPIO_4__GPIO1_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_4__KPP_COL_7 (_MX53_PAD_GPIO_4__KPP_COL_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_4__CCM_CCM_OUT_2 (_MX53_PAD_GPIO_4__CCM_CCM_OUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1 (_MX53_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3 (_MX53_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_4__ESDHC2_CD (_MX53_PAD_GPIO_4__ESDHC2_CD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_4__SCC_SEC_STATE (_MX53_PAD_GPIO_4__SCC_SEC_STATE | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_5__ESAI1_TX2_RX3 (_MX53_PAD_GPIO_5__ESAI1_TX2_RX3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_5__GPIO1_5 (_MX53_PAD_GPIO_5__GPIO1_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_5__KPP_ROW_7 (_MX53_PAD_GPIO_5__KPP_ROW_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_5__CCM_CLKO (_MX53_PAD_GPIO_5__CCM_CLKO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 (_MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 (_MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_5__I2C3_SCL (_MX53_PAD_GPIO_5__I2C3_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_5__CCM_PLL1_BYP (_MX53_PAD_GPIO_5__CCM_PLL1_BYP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_7__ESAI1_TX4_RX1 (_MX53_PAD_GPIO_7__ESAI1_TX4_RX1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_7__GPIO1_7 (_MX53_PAD_GPIO_7__GPIO1_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_7__EPIT1_EPITO (_MX53_PAD_GPIO_7__EPIT1_EPITO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_7__CAN1_TXCAN (_MX53_PAD_GPIO_7__CAN1_TXCAN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_7__UART2_TXD_MUX (_MX53_PAD_GPIO_7__UART2_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_7__FIRI_RXD (_MX53_PAD_GPIO_7__FIRI_RXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_7__SPDIF_PLOCK (_MX53_PAD_GPIO_7__SPDIF_PLOCK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_7__CCM_PLL2_BYP (_MX53_PAD_GPIO_7__CCM_PLL2_BYP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_8__ESAI1_TX5_RX0 (_MX53_PAD_GPIO_8__ESAI1_TX5_RX0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_8__GPIO1_8 (_MX53_PAD_GPIO_8__GPIO1_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_8__EPIT2_EPITO (_MX53_PAD_GPIO_8__EPIT2_EPITO | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_8__CAN1_RXCAN (_MX53_PAD_GPIO_8__CAN1_RXCAN | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_8__UART2_RXD_MUX (_MX53_PAD_GPIO_8__UART2_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_8__FIRI_TXD (_MX53_PAD_GPIO_8__FIRI_TXD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_8__SPDIF_SRCLK (_MX53_PAD_GPIO_8__SPDIF_SRCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_8__CCM_PLL3_BYP (_MX53_PAD_GPIO_8__CCM_PLL3_BYP | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_16__ESAI1_TX3_RX2 (_MX53_PAD_GPIO_16__ESAI1_TX3_RX2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_16__GPIO7_11 (_MX53_PAD_GPIO_16__GPIO7_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT (_MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 (_MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_16__SPDIF_IN1 (_MX53_PAD_GPIO_16__SPDIF_IN1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_16__I2C3_SDA (_MX53_PAD_GPIO_16__I2C3_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_16__SJC_DE_B (_MX53_PAD_GPIO_16__SJC_DE_B | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_17__ESAI1_TX0 (_MX53_PAD_GPIO_17__ESAI1_TX0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_17__GPIO7_12 (_MX53_PAD_GPIO_17__GPIO7_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_17__SDMA_EXT_EVENT_0 (_MX53_PAD_GPIO_17__SDMA_EXT_EVENT_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_17__GPC_PMIC_RDY (_MX53_PAD_GPIO_17__GPC_PMIC_RDY | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_17__RTC_CE_RTC_FSV_TRIG (_MX53_PAD_GPIO_17__RTC_CE_RTC_FSV_TRIG | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_17__SPDIF_OUT1 (_MX53_PAD_GPIO_17__SPDIF_OUT1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_17__IPU_SNOOP2 (_MX53_PAD_GPIO_17__IPU_SNOOP2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_17__SJC_JTAG_ACT (_MX53_PAD_GPIO_17__SJC_JTAG_ACT | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_18__ESAI1_TX1 (_MX53_PAD_GPIO_18__ESAI1_TX1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_18__GPIO7_13 (_MX53_PAD_GPIO_18__GPIO7_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_18__SDMA_EXT_EVENT_1 (_MX53_PAD_GPIO_18__SDMA_EXT_EVENT_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_18__OWIRE_LINE (_MX53_PAD_GPIO_18__OWIRE_LINE | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_18__RTC_CE_RTC_ALARM2_TRIG (_MX53_PAD_GPIO_18__RTC_CE_RTC_ALARM2_TRIG | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_18__CCM_ASRC_EXT_CLK (_MX53_PAD_GPIO_18__CCM_ASRC_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_18__ESDHC1_LCTL (_MX53_PAD_GPIO_18__ESDHC1_LCTL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_18__SRC_SYSTEM_RST (_MX53_PAD_GPIO_18__SRC_SYSTEM_RST | MUX_PAD_CTRL(NO_PAD_CTRL)) #endif /* __MACH_IOMUX_MX53_H__ */ -- cgit v1.2.3-18-g5258 From bb58b3e8b18c542f30f898fff82f7ce58a4bdf7a Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 19 Jan 2011 10:27:33 -0200 Subject: ARM: mx5: Use dummy clock for the keypad Reuse dummy_clk for the imx-keypad device instead of using a dedicated kpp_clk. Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/clock-mx51-mx53.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c index 0a19e7567c0..c66be0ee40c 100644 --- a/arch/arm/mach-mx5/clock-mx51-mx53.c +++ b/arch/arm/mach-mx5/clock-mx51-mx53.c @@ -867,10 +867,6 @@ static struct clk gpt_32k_clk = { .parent = &ckil_clk, }; -static struct clk kpp_clk = { - .id = 0, -}; - static struct clk dummy_clk = { .id = 0, }; @@ -1302,7 +1298,7 @@ static struct clk_lookup mx51_lookups[] = { _REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_ahb_clk) _REGISTER_CLOCK("fsl-usb2-udc", "usb", usboh3_clk) _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk) - _REGISTER_CLOCK("imx-keypad", NULL, kpp_clk) + _REGISTER_CLOCK("imx-keypad", NULL, dummy_clk) _REGISTER_CLOCK("mxc_nand", NULL, nfc_clk) _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk) _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk) -- cgit v1.2.3-18-g5258 From 67f43086a24b77a82724855141a5b7a4d72549bd Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Fri, 14 Jan 2011 23:11:23 +0800 Subject: ARM: mxs: add ocotp read function Signed-off-by: Shawn Guo Signed-off-by: Sascha Hauer --- arch/arm/mach-mxs/Kconfig | 4 ++ arch/arm/mach-mxs/Makefile | 2 + arch/arm/mach-mxs/include/mach/common.h | 1 + arch/arm/mach-mxs/ocotp.c | 90 +++++++++++++++++++++++++++++++++ 4 files changed, 97 insertions(+) create mode 100644 arch/arm/mach-mxs/ocotp.c (limited to 'arch') diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index 8bfc8df5461..cd2fbdfc37e 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -2,6 +2,9 @@ if ARCH_MXS source "arch/arm/mach-mxs/devices/Kconfig" +config MXS_OCOTP + bool + config SOC_IMX23 bool select CPU_ARM926T @@ -26,6 +29,7 @@ config MACH_MX28EVK select SOC_IMX28 select MXS_HAVE_AMBA_DUART select MXS_HAVE_PLATFORM_FEC + select MXS_OCOTP default y help Include support for MX28EVK platform. This includes specific diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile index 39d3f9c2a84..df501a8340f 100644 --- a/arch/arm/mach-mxs/Makefile +++ b/arch/arm/mach-mxs/Makefile @@ -1,6 +1,8 @@ # Common support obj-y := clock.o devices.o gpio.o icoll.o iomux.o system.o timer.o +obj-$(CONFIG_MXS_OCOTP) += ocotp.o + obj-$(CONFIG_SOC_IMX23) += clock-mx23.o mm-mx23.o obj-$(CONFIG_SOC_IMX28) += clock-mx28.o mm-mx28.o diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h index 59133eb3cc9..635bb5d9a20 100644 --- a/arch/arm/mach-mxs/include/mach/common.h +++ b/arch/arm/mach-mxs/include/mach/common.h @@ -13,6 +13,7 @@ struct clk; +extern const u32 *mxs_get_ocotp(void); extern int mxs_reset_block(void __iomem *); extern void mxs_timer_init(struct clk *, int); diff --git a/arch/arm/mach-mxs/ocotp.c b/arch/arm/mach-mxs/ocotp.c new file mode 100644 index 00000000000..65157a35dbb --- /dev/null +++ b/arch/arm/mach-mxs/ocotp.c @@ -0,0 +1,90 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include + +#include + +#define OCOTP_WORD_OFFSET 0x20 +#define OCOTP_WORD_COUNT 0x20 + +#define BM_OCOTP_CTRL_BUSY (1 << 8) +#define BM_OCOTP_CTRL_ERROR (1 << 9) +#define BM_OCOTP_CTRL_RD_BANK_OPEN (1 << 12) + +static DEFINE_MUTEX(ocotp_mutex); +static u32 ocotp_words[OCOTP_WORD_COUNT]; + +const u32 *mxs_get_ocotp(void) +{ + void __iomem *ocotp_base = MXS_IO_ADDRESS(MXS_OCOTP_BASE_ADDR); + int timeout = 0x400; + size_t i; + static int once = 0; + + if (once) + return ocotp_words; + + mutex_lock(&ocotp_mutex); + + /* + * clk_enable(hbus_clk) for ocotp can be skipped + * as it must be on when system is running. + */ + + /* try to clear ERROR bit */ + __mxs_clrl(BM_OCOTP_CTRL_ERROR, ocotp_base); + + /* check both BUSY and ERROR cleared */ + while ((__raw_readl(ocotp_base) & + (BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR)) && --timeout) + cpu_relax(); + + if (unlikely(!timeout)) + goto error_unlock; + + /* open OCOTP banks for read */ + __mxs_setl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base); + + /* approximately wait 32 hclk cycles */ + udelay(1); + + /* poll BUSY bit becoming cleared */ + timeout = 0x400; + while ((__raw_readl(ocotp_base) & BM_OCOTP_CTRL_BUSY) && --timeout) + cpu_relax(); + + if (unlikely(!timeout)) + goto error_unlock; + + for (i = 0; i < OCOTP_WORD_COUNT; i++) + ocotp_words[i] = __raw_readl(ocotp_base + OCOTP_WORD_OFFSET + + i * 0x10); + + /* close banks for power saving */ + __mxs_clrl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base); + + once = 1; + + mutex_unlock(&ocotp_mutex); + + return ocotp_words; + +error_unlock: + mutex_unlock(&ocotp_mutex); + pr_err("%s: timeout in reading OCOTP\n", __func__); + return NULL; +} -- cgit v1.2.3-18-g5258 From a320b2793dae44953dc58e9f681d8f161eb5b3ab Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Fri, 14 Jan 2011 15:25:52 +0800 Subject: ARM: mxs/mx28evk: read fec mac address from ocotp Read fec mac address from ocotp and save it into fec_platform_data mac field for fec driver to use. Signed-off-by: Shawn Guo Signed-off-by: Sascha Hauer --- arch/arm/mach-mxs/mach-mx28evk.c | 35 ++++++++++++++++++++++++++++++++++- 1 file changed, 34 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c index 8e2c5975001..e8db99fabc4 100644 --- a/arch/arm/mach-mxs/mach-mx28evk.c +++ b/arch/arm/mach-mxs/mach-mx28evk.c @@ -119,7 +119,7 @@ static void __init mx28evk_fec_reset(void) gpio_set_value(MX28EVK_FEC_PHY_RESET, 1); } -static struct fec_platform_data mx28_fec_pdata[] = { +static struct fec_platform_data mx28_fec_pdata[] __initdata = { { /* fec0 */ .phy = PHY_INTERFACE_MODE_RMII, @@ -129,12 +129,45 @@ static struct fec_platform_data mx28_fec_pdata[] = { }, }; +static int __init mx28evk_fec_get_mac(void) +{ + int i; + u32 val; + const u32 *ocotp = mxs_get_ocotp(); + + if (!ocotp) + goto error; + + /* + * OCOTP only stores the last 4 octets for each mac address, + * so hard-code Freescale OUI (00:04:9f) here. + */ + for (i = 0; i < 2; i++) { + val = ocotp[i * 4]; + mx28_fec_pdata[i].mac[0] = 0x00; + mx28_fec_pdata[i].mac[1] = 0x04; + mx28_fec_pdata[i].mac[2] = 0x9f; + mx28_fec_pdata[i].mac[3] = (val >> 16) & 0xff; + mx28_fec_pdata[i].mac[4] = (val >> 8) & 0xff; + mx28_fec_pdata[i].mac[5] = (val >> 0) & 0xff; + } + + return 0; + +error: + pr_err("%s: timeout when reading fec mac from OCOTP\n", __func__); + return -ETIMEDOUT; +} + static void __init mx28evk_init(void) { mxs_iomux_setup_multiple_pads(mx28evk_pads, ARRAY_SIZE(mx28evk_pads)); mx28_add_duart(); + if (mx28evk_fec_get_mac()) + pr_warn("%s: failed on fec mac setup\n", __func__); + mx28evk_fec_reset(); mx28_add_fec(0, &mx28_fec_pdata[0]); mx28_add_fec(1, &mx28_fec_pdata[1]); -- cgit v1.2.3-18-g5258 From 4d805f7b6607f6e547dc22e5d57c201e43d21c05 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 20 Jan 2011 11:46:02 +0900 Subject: ASoC: sh: fsi: Add snd_soc_dai_set_fmt support This patch add snd_soc_dai_ops :: set_fmt to FSI driver and select master/slave clock mode by snd_soc_dai_set_fmt on fsi-xxx.c instead of platform infomation code. This patch remove fsi_is_master function which is no longer needed. Signed-off-by: Kuninori Morimoto Acked-by: Liam Girdwood Acked-by: Paul Mundt Signed-off-by: Mark Brown --- arch/arm/mach-shmobile/board-ag5evm.c | 4 +--- arch/arm/mach-shmobile/board-ap4evb.c | 2 -- arch/arm/mach-shmobile/board-mackerel.c | 2 -- arch/sh/boards/mach-ecovec24/setup.c | 2 -- arch/sh/boards/mach-se/7724/setup.c | 2 -- 5 files changed, 1 insertion(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index c18a740a415..9ee55e0fbeb 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -119,9 +119,7 @@ static struct platform_device keysc_device = { /* FSI A */ static struct sh_fsi_platform_info fsi_info = { - .porta_flags = SH_FSI_OUT_SLAVE_MODE | - SH_FSI_IN_SLAVE_MODE | - SH_FSI_OFMT(I2S) | + .porta_flags = SH_FSI_OFMT(I2S) | SH_FSI_IFMT(I2S), }; diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 3cf0951caa2..d503a74e30e 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -674,8 +674,6 @@ static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable) static struct sh_fsi_platform_info fsi_info = { .porta_flags = SH_FSI_BRS_INV | - SH_FSI_OUT_SLAVE_MODE | - SH_FSI_IN_SLAVE_MODE | SH_FSI_OFMT(PCM) | SH_FSI_IFMT(PCM), diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 7b15d21f0f6..425962d5b29 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -611,8 +611,6 @@ fsi_set_rate_end: static struct sh_fsi_platform_info fsi_info = { .porta_flags = SH_FSI_BRS_INV | - SH_FSI_OUT_SLAVE_MODE | - SH_FSI_IN_SLAVE_MODE | SH_FSI_OFMT(PCM) | SH_FSI_IFMT(PCM), diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 33b662999fc..037416f346c 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -724,8 +724,6 @@ static struct platform_device camera_devices[] = { /* FSI */ static struct sh_fsi_platform_info fsi_info = { .portb_flags = SH_FSI_BRS_INV | - SH_FSI_OUT_SLAVE_MODE | - SH_FSI_IN_SLAVE_MODE | SH_FSI_OFMT(I2S) | SH_FSI_IFMT(I2S), }; diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index 527679394a2..b4aef05dd8b 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -287,8 +287,6 @@ static struct platform_device ceu1_device = { /* change J20, J21, J22 pin to 1-2 connection to use slave mode */ static struct sh_fsi_platform_info fsi_info = { .porta_flags = SH_FSI_BRS_INV | - SH_FSI_OUT_SLAVE_MODE | - SH_FSI_IN_SLAVE_MODE | SH_FSI_OFMT(PCM) | SH_FSI_IFMT(PCM), }; -- cgit v1.2.3-18-g5258 From 87fa28e972c223f69c1315a1b2ddb2a11d33ad0e Mon Sep 17 00:00:00 2001 From: David Brown Date: Tue, 4 Jan 2011 17:02:48 -0800 Subject: msm: Add CPU queries Create runtime queries to distinguish the various MSM targets. Although these would probably be better named soc_is..., use cpu_is... to match convention in the rest of the kernel. Hard code the tests based on config options for now. When runtime device detection is implemented, these can be made dynamic. Signed-off-by: David Brown --- arch/arm/mach-msm/include/mach/cpu.h | 48 ++++++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) create mode 100644 arch/arm/mach-msm/include/mach/cpu.h (limited to 'arch') diff --git a/arch/arm/mach-msm/include/mach/cpu.h b/arch/arm/mach-msm/include/mach/cpu.h new file mode 100644 index 00000000000..e1ba9db3714 --- /dev/null +++ b/arch/arm/mach-msm/include/mach/cpu.h @@ -0,0 +1,48 @@ +/* Copyright (c) 2011, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#ifndef __ARCH_ARM_MACH_MSM_CPU_H__ +#define __ARCH_ARM_MACH_MSM_CPU_H__ + +/* TODO: For now, only one CPU can be compiled at a time. */ + +#define cpu_is_msm7x01() 0 +#define cpu_is_msm7x30() 0 +#define cpu_is_qsd8x50() 0 +#define cpu_is_msm8x60() 0 + +#ifdef CONFIG_ARCH_MSM7X00A +# undef cpu_is_msm7x01 +# define cpu_is_msm7x01() 1 +#endif + +#ifdef CONFIG_ARCH_MSM7X30 +# undef cpu_is_msm7x30 +# define cpu_is_msm7x30() 1 +#endif + +#ifdef CONFIG_ARCH_QSD8X50 +# undef cpu_is_qsd8x50 +# define cpu_is_qsd8x50() 1 +#endif + +#ifdef CONFIG_ARCH_MSM8X60 +# undef cpu_is_msm8x60 +# define cpu_is_msm8x60() 1 +#endif + +#endif -- cgit v1.2.3-18-g5258 From 8c27e6f305242ffab0c88eed5dea8394b8ce86d0 Mon Sep 17 00:00:00 2001 From: David Brown Date: Fri, 7 Jan 2011 10:20:49 -0800 Subject: msm: Generalize timer register mappings Allow the timer register to be determined dynamically instead of at compile time. Use common virtual addresses for the registers across all MSM chips, and select the register mappings based on the detected CPU. Signed-off-by: David Brown --- arch/arm/mach-msm/include/mach/msm_iomap-7x00.h | 10 ++---- arch/arm/mach-msm/include/mach/msm_iomap-7x30.h | 14 ++------ arch/arm/mach-msm/include/mach/msm_iomap-8x50.h | 14 ++------ arch/arm/mach-msm/include/mach/msm_iomap-8x60.h | 15 +++------ arch/arm/mach-msm/include/mach/msm_iomap.h | 7 ++-- arch/arm/mach-msm/io.c | 22 ++++++------- arch/arm/mach-msm/timer.c | 43 ++++++++++++++----------- 7 files changed, 55 insertions(+), 70 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h index cfff0e74f12..1e75ed74f16 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h @@ -1,6 +1,7 @@ /* arch/arm/mach-msm/include/mach/msm_iomap.h * * Copyright (C) 2007 Google, Inc. + * Copyright (c) 2011, Code Aurora Forum. All rights reserved. * Author: Brian Swetland * * This software is licensed under the terms of the GNU General Public @@ -47,13 +48,8 @@ #define MSM_VIC_PHYS 0xC0000000 #define MSM_VIC_SIZE SZ_4K -#define MSM_CSR_BASE IOMEM(0xE0001000) -#define MSM_CSR_PHYS 0xC0100000 -#define MSM_CSR_SIZE SZ_4K - -#define MSM_GPT_PHYS MSM_CSR_PHYS -#define MSM_GPT_BASE MSM_CSR_BASE -#define MSM_GPT_SIZE SZ_4K +#define MSM7X00_CSR_PHYS 0xC0100000 +#define MSM7X00_CSR_SIZE SZ_4K #define MSM_DMOV_BASE IOMEM(0xE0002000) #define MSM_DMOV_PHYS 0xA9700000 diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h index 0fd7b68ca11..4d84be15955 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h @@ -1,6 +1,6 @@ /* * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved. + * Copyright (c) 2008-2011 Code Aurora Forum. All rights reserved. * Author: Brian Swetland * * This software is licensed under the terms of the GNU General Public @@ -39,16 +39,8 @@ #define MSM_VIC_PHYS 0xC0080000 #define MSM_VIC_SIZE SZ_4K -#define MSM_CSR_BASE IOMEM(0xE0001000) -#define MSM_CSR_PHYS 0xC0100000 -#define MSM_CSR_SIZE SZ_4K - -#define MSM_TMR_PHYS MSM_CSR_PHYS -#define MSM_TMR_BASE MSM_CSR_BASE -#define MSM_TMR_SIZE SZ_4K - -#define MSM_GPT_BASE (MSM_TMR_BASE + 0x4) -#define MSM_DGT_BASE (MSM_TMR_BASE + 0x24) +#define MSM7X30_CSR_PHYS 0xC0100000 +#define MSM7X30_CSR_SIZE SZ_4K #define MSM_DMOV_BASE IOMEM(0xE0002000) #define MSM_DMOV_PHYS 0xAC400000 diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h index acc819eb76e..cf1c2df1d95 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h @@ -1,6 +1,6 @@ /* * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved. + * Copyright (c) 2008-2011 Code Aurora Forum. All rights reserved. * Author: Brian Swetland * * This software is licensed under the terms of the GNU General Public @@ -39,16 +39,8 @@ #define MSM_VIC_PHYS 0xAC000000 #define MSM_VIC_SIZE SZ_4K -#define MSM_CSR_BASE IOMEM(0xE0001000) -#define MSM_CSR_PHYS 0xAC100000 -#define MSM_CSR_SIZE SZ_4K - -#define MSM_TMR_PHYS MSM_CSR_PHYS -#define MSM_TMR_BASE MSM_CSR_BASE -#define MSM_TMR_SIZE SZ_4K - -#define MSM_GPT_BASE MSM_TMR_BASE -#define MSM_DGT_BASE (MSM_TMR_BASE + 0x10) +#define QSD8X50_CSR_PHYS 0xAC100000 +#define QSD8X50_CSR_SIZE SZ_4K #define MSM_DMOV_BASE IOMEM(0xE0002000) #define MSM_DMOV_PHYS 0xA9700000 diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h index a54e33b0882..d5482d65bb3 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h @@ -1,6 +1,6 @@ /* * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved. + * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved. * Author: Brian Swetland * * This software is licensed under the terms of the GNU General Public @@ -58,16 +58,11 @@ #define MSM_SHARED_RAM_BASE IOMEM(0xF0100000) #define MSM_SHARED_RAM_SIZE SZ_1M -#define MSM_TMR_BASE IOMEM(0xF0200000) -#define MSM_TMR_PHYS 0x02000000 -#define MSM_TMR_SIZE SZ_4K +#define MSM8X60_TMR_PHYS 0x02000000 +#define MSM8X60_TMR_SIZE SZ_4K -#define MSM_TMR0_BASE IOMEM(0xF0201000) -#define MSM_TMR0_PHYS 0x02040000 -#define MSM_TMR0_SIZE SZ_4K - -#define MSM_GPT_BASE (MSM_TMR_BASE + 0x4) -#define MSM_DGT_BASE (MSM_TMR_BASE + 0x24) +#define MSM8X60_TMR0_PHYS 0x02040000 +#define MSM8X60_TMR0_SIZE SZ_4K #define MSM_IOMMU_JPEGD_PHYS 0x07300000 #define MSM_IOMMU_JPEGD_SIZE SZ_1M diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h index 8e24dd81213..0243bd0c365 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap.h @@ -1,6 +1,6 @@ /* * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved. + * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved. * Author: Brian Swetland * * This software is licensed under the terms of the GNU General Public @@ -53,6 +53,9 @@ #include "msm_iomap-7x00.h" #endif - +/* Virtual addressses shared across all MSM targets. */ +#define MSM_CSR_BASE IOMEM(0xE0001000) +#define MSM_TMR_BASE IOMEM(0xF0200000) +#define MSM_TMR0_BASE IOMEM(0xF0201000) #endif diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c index 1260007a9dd..97dcd8c43ab 100644 --- a/arch/arm/mach-msm/io.c +++ b/arch/arm/mach-msm/io.c @@ -3,7 +3,7 @@ * MSM7K, QSD io support * * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved. + * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved. * Author: Brian Swetland * * This software is licensed under the terms of the GNU General Public @@ -28,18 +28,20 @@ #include -#define MSM_DEVICE(name) { \ +#define MSM_CHIP_DEVICE(name, chip) { \ .virtual = (unsigned long) MSM_##name##_BASE, \ - .pfn = __phys_to_pfn(MSM_##name##_PHYS), \ - .length = MSM_##name##_SIZE, \ + .pfn = __phys_to_pfn(chip##_##name##_PHYS), \ + .length = chip##_##name##_SIZE, \ .type = MT_DEVICE_NONSHARED, \ } +#define MSM_DEVICE(name) MSM_CHIP_DEVICE(name, MSM) + #if defined(CONFIG_ARCH_MSM7X00A) || defined(CONFIG_ARCH_MSM7X27) \ || defined(CONFIG_ARCH_MSM7X25) static struct map_desc msm_io_desc[] __initdata = { MSM_DEVICE(VIC), - MSM_DEVICE(CSR), + MSM_CHIP_DEVICE(CSR, MSM7X00), MSM_DEVICE(GPT), MSM_DEVICE(DMOV), MSM_DEVICE(GPIO1), @@ -73,8 +75,7 @@ void __init msm_map_common_io(void) #ifdef CONFIG_ARCH_QSD8X50 static struct map_desc qsd8x50_io_desc[] __initdata = { MSM_DEVICE(VIC), - MSM_DEVICE(CSR), - MSM_DEVICE(TMR), + MSM_CHIP_DEVICE(CSR, QSD8X50), MSM_DEVICE(DMOV), MSM_DEVICE(GPIO1), MSM_DEVICE(GPIO2), @@ -104,8 +105,8 @@ void __init msm_map_qsd8x50_io(void) static struct map_desc msm8x60_io_desc[] __initdata = { MSM_DEVICE(QGIC_DIST), MSM_DEVICE(QGIC_CPU), - MSM_DEVICE(TMR), - MSM_DEVICE(TMR0), + MSM_CHIP_DEVICE(TMR, MSM8X60), + MSM_CHIP_DEVICE(TMR0, MSM8X60), MSM_DEVICE(ACC), MSM_DEVICE(GCC), }; @@ -119,8 +120,7 @@ void __init msm_map_msm8x60_io(void) #ifdef CONFIG_ARCH_MSM7X30 static struct map_desc msm7x30_io_desc[] __initdata = { MSM_DEVICE(VIC), - MSM_DEVICE(CSR), - MSM_DEVICE(TMR), + MSM_CHIP_DEVICE(CSR, MSM7X30), MSM_DEVICE(DMOV), MSM_DEVICE(GPIO1), MSM_DEVICE(GPIO2), diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index c105d28b53e..5548b156cff 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -24,10 +24,7 @@ #include #include - -#ifndef MSM_DGT_BASE -#define MSM_DGT_BASE (MSM_GPT_BASE + 0x10) -#endif +#include #define TIMER_MATCH_VAL 0x0000 #define TIMER_COUNT_VAL 0x0004 @@ -52,14 +49,9 @@ enum timer_location { GLOBAL_TIMER = 1, }; -#ifdef MSM_TMR0_BASE -#define MSM_TMR_GLOBAL (MSM_TMR0_BASE - MSM_TMR_BASE) -#else -#define MSM_TMR_GLOBAL 0 -#endif - #define MSM_GLOBAL_TIMER MSM_CLOCK_DGT +/* TODO: Remove these ifdefs */ #if defined(CONFIG_ARCH_QSD8X50) #define DGT_HZ (19200000 / 4) /* 19.2 MHz / 4 by default */ #define MSM_DGT_SHIFT (0) @@ -177,11 +169,7 @@ static struct msm_clock msm_clocks[] = { .dev_id = &msm_clocks[0].clockevent, .irq = INT_GP_TIMER_EXP }, - .regbase = MSM_GPT_BASE, .freq = GPT_HZ, - .local_counter = MSM_GPT_BASE + TIMER_COUNT_VAL, - .global_counter = MSM_GPT_BASE + TIMER_COUNT_VAL + - MSM_TMR_GLOBAL, }, [MSM_CLOCK_DGT] = { .clockevent = { @@ -206,12 +194,8 @@ static struct msm_clock msm_clocks[] = { .dev_id = &msm_clocks[1].clockevent, .irq = INT_DEBUG_TIMER_EXP }, - .regbase = MSM_DGT_BASE, .freq = DGT_HZ >> MSM_DGT_SHIFT, .shift = MSM_DGT_SHIFT, - .local_counter = MSM_DGT_BASE + TIMER_COUNT_VAL, - .global_counter = MSM_DGT_BASE + TIMER_COUNT_VAL + - MSM_TMR_GLOBAL, } }; @@ -219,6 +203,25 @@ static void __init msm_timer_init(void) { int i; int res; + int global_offset = 0; + + if (cpu_is_msm7x01()) { + msm_clocks[MSM_CLOCK_GPT].regbase = MSM_CSR_BASE; + msm_clocks[MSM_CLOCK_DGT].regbase = MSM_CSR_BASE + 0x10; + } else if (cpu_is_msm7x30()) { + msm_clocks[MSM_CLOCK_GPT].regbase = MSM_CSR_BASE + 0x04; + msm_clocks[MSM_CLOCK_DGT].regbase = MSM_CSR_BASE + 0x24; + } else if (cpu_is_qsd8x50()) { + msm_clocks[MSM_CLOCK_GPT].regbase = MSM_CSR_BASE; + msm_clocks[MSM_CLOCK_DGT].regbase = MSM_CSR_BASE + 0x10; + } else if (cpu_is_msm8x60()) { + msm_clocks[MSM_CLOCK_GPT].regbase = MSM_TMR_BASE + 0x04; + msm_clocks[MSM_CLOCK_DGT].regbase = MSM_TMR_BASE + 0x24; + + /* Use CPU0's timer as the global timer. */ + global_offset = MSM_TMR0_BASE - MSM_TMR_BASE; + } else + BUG(); #ifdef CONFIG_ARCH_MSM_SCORPIONMP writel(DGT_CLK_CTL_DIV_4, MSM_TMR_BASE + DGT_CLK_CTL); @@ -228,6 +231,10 @@ static void __init msm_timer_init(void) struct msm_clock *clock = &msm_clocks[i]; struct clock_event_device *ce = &clock->clockevent; struct clocksource *cs = &clock->clocksource; + + clock->local_counter = clock->regbase + TIMER_COUNT_VAL; + clock->global_counter = clock->local_counter + global_offset; + writel(0, clock->regbase + TIMER_ENABLE); writel(0, clock->regbase + TIMER_CLEAR); writel(~0, clock->regbase + TIMER_MATCH_VAL); -- cgit v1.2.3-18-g5258 From 8bb06444804c58dffcb5d048381c6378d2b007f7 Mon Sep 17 00:00:00 2001 From: David Brown Date: Tue, 4 Jan 2011 11:02:59 -0800 Subject: msm: Generalize QGIC registers The QGIC registers are mapped to the same virtual addresses across targets, only the physical address changes. Move the BASE address out of target-specific files, and add a SOC name to the base addresses. Signed-off-by: David Brown --- arch/arm/mach-msm/include/mach/msm_iomap-8x60.h | 10 ++++------ arch/arm/mach-msm/include/mach/msm_iomap.h | 2 ++ arch/arm/mach-msm/io.c | 4 ++-- 3 files changed, 8 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h index d5482d65bb3..5bd18db11ae 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h @@ -35,13 +35,11 @@ * */ -#define MSM_QGIC_DIST_BASE IOMEM(0xF0000000) -#define MSM_QGIC_DIST_PHYS 0x02080000 -#define MSM_QGIC_DIST_SIZE SZ_4K +#define MSM8X60_QGIC_DIST_PHYS 0x02080000 +#define MSM8X60_QGIC_DIST_SIZE SZ_4K -#define MSM_QGIC_CPU_BASE IOMEM(0xF0001000) -#define MSM_QGIC_CPU_PHYS 0x02081000 -#define MSM_QGIC_CPU_SIZE SZ_4K +#define MSM8X60_QGIC_CPU_PHYS 0x02081000 +#define MSM8X60_QGIC_CPU_SIZE SZ_4K #define MSM_ACC_BASE IOMEM(0xF0002000) #define MSM_ACC_PHYS 0x02001000 diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h index 0243bd0c365..bb42de31886 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap.h @@ -55,6 +55,8 @@ /* Virtual addressses shared across all MSM targets. */ #define MSM_CSR_BASE IOMEM(0xE0001000) +#define MSM_QGIC_DIST_BASE IOMEM(0xF0000000) +#define MSM_QGIC_CPU_BASE IOMEM(0xF0001000) #define MSM_TMR_BASE IOMEM(0xF0200000) #define MSM_TMR0_BASE IOMEM(0xF0201000) diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c index 97dcd8c43ab..49692bb375a 100644 --- a/arch/arm/mach-msm/io.c +++ b/arch/arm/mach-msm/io.c @@ -103,8 +103,8 @@ void __init msm_map_qsd8x50_io(void) #ifdef CONFIG_ARCH_MSM8X60 static struct map_desc msm8x60_io_desc[] __initdata = { - MSM_DEVICE(QGIC_DIST), - MSM_DEVICE(QGIC_CPU), + MSM_CHIP_DEVICE(QGIC_DIST, MSM8X60), + MSM_CHIP_DEVICE(QGIC_CPU, MSM8X60), MSM_CHIP_DEVICE(TMR, MSM8X60), MSM_CHIP_DEVICE(TMR0, MSM8X60), MSM_DEVICE(ACC), -- cgit v1.2.3-18-g5258 From 5d0afd74b7f5202cad2d26b5bcd1fc1bdf44858f Mon Sep 17 00:00:00 2001 From: Stepan Moskovchenko Date: Wed, 1 Dec 2010 19:05:49 -0800 Subject: msm: io: I/O register definitions for MSM8960 Add the register address definitions for the basic hardware blocks on the Qualcomm MSM8960 chip. Signed-off-by: Stepan Moskovchenko Signed-off-by: David Brown --- arch/arm/mach-msm/include/mach/io.h | 1 + arch/arm/mach-msm/include/mach/msm_iomap-8960.h | 48 +++++++++++++++++++++++++ arch/arm/mach-msm/include/mach/msm_iomap.h | 2 ++ arch/arm/mach-msm/io.c | 14 ++++++++ 4 files changed, 65 insertions(+) create mode 100644 arch/arm/mach-msm/include/mach/msm_iomap-8960.h (limited to 'arch') diff --git a/arch/arm/mach-msm/include/mach/io.h b/arch/arm/mach-msm/include/mach/io.h index 7386e732baa..dc1b928745e 100644 --- a/arch/arm/mach-msm/include/mach/io.h +++ b/arch/arm/mach-msm/include/mach/io.h @@ -29,6 +29,7 @@ void __iomem *__msm_ioremap(unsigned long phys_addr, size_t size, unsigned int m void msm_map_qsd8x50_io(void); void msm_map_msm7x30_io(void); void msm_map_msm8x60_io(void); +void msm_map_msm8960_io(void); extern unsigned int msm_shared_ram_phys; diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8960.h b/arch/arm/mach-msm/include/mach/msm_iomap-8960.h new file mode 100644 index 00000000000..3c9d9602a31 --- /dev/null +++ b/arch/arm/mach-msm/include/mach/msm_iomap-8960.h @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2007 Google, Inc. + * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved. + * Author: Brian Swetland + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * The MSM peripherals are spread all over across 768MB of physical + * space, which makes just having a simple IO_ADDRESS macro to slide + * them into the right virtual location rough. Instead, we will + * provide a master phys->virt mapping for peripherals here. + * + */ + +#ifndef __ASM_ARCH_MSM_IOMAP_8960_H +#define __ASM_ARCH_MSM_IOMAP_8960_H + +/* Physical base address and size of peripherals. + * Ordered by the virtual base addresses they will be mapped at. + * + * If you add or remove entries here, you'll want to edit the + * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your + * changes. + * + */ + + +#define MSM8960_QGIC_DIST_PHYS 0x02000000 +#define MSM8960_QGIC_DIST_SIZE SZ_4K + +#define MSM8960_QGIC_CPU_PHYS 0x02002000 +#define MSM8960_QGIC_CPU_SIZE SZ_4K + +#define MSM8960_TMR_PHYS 0x0200A000 +#define MSM8960_TMR_SIZE SZ_4K + +#define MSM8960_TMR0_PHYS 0x0208A000 +#define MSM8960_TMR0_SIZE SZ_4K + +#endif diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h index bb42de31886..c98c7591f3b 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap.h @@ -53,6 +53,8 @@ #include "msm_iomap-7x00.h" #endif +#include "msm_iomap-8960.h" + /* Virtual addressses shared across all MSM targets. */ #define MSM_CSR_BASE IOMEM(0xE0001000) #define MSM_QGIC_DIST_BASE IOMEM(0xF0000000) diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c index 49692bb375a..d8d9be5d821 100644 --- a/arch/arm/mach-msm/io.c +++ b/arch/arm/mach-msm/io.c @@ -117,6 +117,20 @@ void __init msm_map_msm8x60_io(void) } #endif /* CONFIG_ARCH_MSM8X60 */ +#ifdef CONFIG_ARCH_MSM8960 +static struct map_desc msm8960_io_desc[] __initdata = { + MSM_CHIP_DEVICE(QGIC_DIST, MSM8960), + MSM_CHIP_DEVICE(QGIC_CPU, MSM8960), + MSM_CHIP_DEVICE(TMR, MSM8960), + MSM_CHIP_DEVICE(TMR0, MSM8960), +}; + +void __init msm_map_msm8960_io(void) +{ + iotable_init(msm8960_io_desc, ARRAY_SIZE(msm8960_io_desc)); +} +#endif /* CONFIG_ARCH_MSM8960 */ + #ifdef CONFIG_ARCH_MSM7X30 static struct map_desc msm7x30_io_desc[] __initdata = { MSM_DEVICE(VIC), -- cgit v1.2.3-18-g5258 From a2ad9421ce19f57e99b7a5e8798b8697b916d673 Mon Sep 17 00:00:00 2001 From: Stepan Moskovchenko Date: Wed, 1 Dec 2010 20:06:26 -0800 Subject: msm: Physical offset for MSM8960 Add the physical memory offset value for the Qualcomm MSM8960 chip. Signed-off-by: Stepan Moskovchenko Signed-off-by: David Brown --- arch/arm/mach-msm/include/mach/memory.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-msm/include/mach/memory.h b/arch/arm/mach-msm/include/mach/memory.h index 070e17d237f..014bbd3ac1d 100644 --- a/arch/arm/mach-msm/include/mach/memory.h +++ b/arch/arm/mach-msm/include/mach/memory.h @@ -25,6 +25,8 @@ #define PHYS_OFFSET UL(0x00200000) #elif defined(CONFIG_ARCH_MSM8X60) #define PHYS_OFFSET UL(0x40200000) +#elif defined(CONFIG_ARCH_MSM8960) +#define PHYS_OFFSET UL(0x40200000) #else #define PHYS_OFFSET UL(0x10000000) #endif -- cgit v1.2.3-18-g5258 From a6481cd3d901165100e12f9f1f7787293d757574 Mon Sep 17 00:00:00 2001 From: Stepan Moskovchenko Date: Wed, 1 Dec 2010 19:30:35 -0800 Subject: msm: irqs-8960: Interrupt map for MSM8960 Add the interrupt map for the Qualcomm MSM8960 chip. This chip has an interrupt map that is different from previous targets. Signed-off-by: Stepan Moskovchenko Signed-off-by: David Brown --- arch/arm/mach-msm/include/mach/irqs-8960.h | 293 +++++++++++++++++++++++++++++ arch/arm/mach-msm/include/mach/irqs.h | 3 + 2 files changed, 296 insertions(+) create mode 100644 arch/arm/mach-msm/include/mach/irqs-8960.h (limited to 'arch') diff --git a/arch/arm/mach-msm/include/mach/irqs-8960.h b/arch/arm/mach-msm/include/mach/irqs-8960.h new file mode 100644 index 00000000000..c7f083c53d4 --- /dev/null +++ b/arch/arm/mach-msm/include/mach/irqs-8960.h @@ -0,0 +1,293 @@ +/* Copyright (c) 2011 Code Aurora Forum. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Code Aurora nor + * the names of its contributors may be used to endorse or promote + * products derived from this software without specific prior written + * permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; + * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF + * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#ifndef __ASM_ARCH_MSM_IRQS_8960_H +#define __ASM_ARCH_MSM_IRQS_8960_H + +/* MSM ACPU Interrupt Numbers */ + +/* 0-15: STI/SGI (software triggered/generated interrupts) + 16-31: PPI (private peripheral interrupts) + 32+: SPI (shared peripheral interrupts) */ + +#define GIC_PPI_START 16 +#define GIC_SPI_START 32 + +#define INT_VGIC (GIC_PPI_START + 0) +#define INT_DEBUG_TIMER_EXP (GIC_PPI_START + 1) +#define INT_GP_TIMER_EXP (GIC_PPI_START + 2) +#define INT_GP_TIMER2_EXP (GIC_PPI_START + 3) +#define WDT0_ACCSCSSNBARK_INT (GIC_PPI_START + 4) +#define WDT1_ACCSCSSNBARK_INT (GIC_PPI_START + 5) +#define AVS_SVICINT (GIC_PPI_START + 6) +#define AVS_SVICINTSWDONE (GIC_PPI_START + 7) +#define CPU_DBGCPUXCOMMRXFULL (GIC_PPI_START + 8) +#define CPU_DBGCPUXCOMMTXEMPTY (GIC_PPI_START + 9) +#define CPU_SICCPUXPERFMONIRPTREQ (GIC_PPI_START + 10) +#define SC_AVSCPUXDOWN (GIC_PPI_START + 11) +#define SC_AVSCPUXUP (GIC_PPI_START + 12) +#define SC_SICCPUXACGIRPTREQ (GIC_PPI_START + 13) +#define SC_SICCPUXEXTFAULTIRPTREQ (GIC_PPI_START + 14) +/* PPI 15 is unused */ + +#define SC_SICMPUIRPTREQ (GIC_SPI_START + 0) +#define SC_SICL2IRPTREQ (GIC_SPI_START + 1) +#define SC_SICL2PERFMONIRPTREQ (GIC_SPI_START + 2) +#define SC_SICAGCIRPTREQ (GIC_SPI_START + 3) +#define TLMM_APCC_DIR_CONN_IRQ_0 (GIC_SPI_START + 4) +#define TLMM_APCC_DIR_CONN_IRQ_1 (GIC_SPI_START + 5) +#define TLMM_APCC_DIR_CONN_IRQ_2 (GIC_SPI_START + 6) +#define TLMM_APCC_DIR_CONN_IRQ_3 (GIC_SPI_START + 7) +#define TLMM_APCC_DIR_CONN_IRQ_4 (GIC_SPI_START + 8) +#define TLMM_APCC_DIR_CONN_IRQ_5 (GIC_SPI_START + 9) +#define TLMM_APCC_DIR_CONN_IRQ_6 (GIC_SPI_START + 10) +#define TLMM_APCC_DIR_CONN_IRQ_7 (GIC_SPI_START + 11) +#define TLMM_APCC_DIR_CONN_IRQ_8 (GIC_SPI_START + 12) +#define TLMM_APCC_DIR_CONN_IRQ_9 (GIC_SPI_START + 13) +#define PM8921_SEC_IRQ_103 (GIC_SPI_START + 14) +#define PM8018_SEC_IRQ_106 (GIC_SPI_START + 15) +#define TLMM_APCC_SUMMARY_IRQ (GIC_SPI_START + 16) +#define SPDM_RT_1_IRQ (GIC_SPI_START + 17) +#define SPDM_DIAG_IRQ (GIC_SPI_START + 18) +#define RPM_APCC_CPU0_GP_HIGH_IRQ (GIC_SPI_START + 19) +#define RPM_APCC_CPU0_GP_MEDIUM_IRQ (GIC_SPI_START + 20) +#define RPM_APCC_CPU0_GP_LOW_IRQ (GIC_SPI_START + 21) +#define RPM_APCC_CPU0_WAKE_UP_IRQ (GIC_SPI_START + 22) +#define RPM_APCC_CPU1_GP_HIGH_IRQ (GIC_SPI_START + 23) +#define RPM_APCC_CPU1_GP_MEDIUM_IRQ (GIC_SPI_START + 24) +#define RPM_APCC_CPU1_GP_LOW_IRQ (GIC_SPI_START + 25) +#define RPM_APCC_CPU1_WAKE_UP_IRQ (GIC_SPI_START + 26) +#define SSBI2_2_SC_CPU0_SECURE_IRQ (GIC_SPI_START + 27) +#define SSBI2_2_SC_CPU0_NON_SECURE_IRQ (GIC_SPI_START + 28) +#define SSBI2_1_SC_CPU0_SECURE_IRQ (GIC_SPI_START + 29) +#define SSBI2_1_SC_CPU0_NON_SECURE_IRQ (GIC_SPI_START + 30) +#define MSMC_SC_SEC_CE_IRQ (GIC_SPI_START + 31) +#define MSMC_SC_PRI_CE_IRQ (GIC_SPI_START + 32) +#define SLIMBUS0_CORE_EE1_IRQ (GIC_SPI_START + 33) +#define SLIMBUS0_BAM_EE1_IRQ (GIC_SPI_START + 34) +#define Q6FW_WDOG_EXPIRED_IRQ (GIC_SPI_START + 35) +#define Q6SW_WDOG_EXPIRED_IRQ (GIC_SPI_START + 36) +#define MSS_TO_APPS_IRQ_0 (GIC_SPI_START + 37) +#define MSS_TO_APPS_IRQ_1 (GIC_SPI_START + 38) +#define MSS_TO_APPS_IRQ_2 (GIC_SPI_START + 39) +#define MSS_TO_APPS_IRQ_3 (GIC_SPI_START + 40) +#define MSS_TO_APPS_IRQ_4 (GIC_SPI_START + 41) +#define MSS_TO_APPS_IRQ_5 (GIC_SPI_START + 42) +#define MSS_TO_APPS_IRQ_6 (GIC_SPI_START + 43) +#define MSS_TO_APPS_IRQ_7 (GIC_SPI_START + 44) +#define MSS_TO_APPS_IRQ_8 (GIC_SPI_START + 45) +#define MSS_TO_APPS_IRQ_9 (GIC_SPI_START + 46) +#define VPE_IRQ (GIC_SPI_START + 47) +#define VFE_IRQ (GIC_SPI_START + 48) +#define VCODEC_IRQ (GIC_SPI_START + 49) +#define TV_ENC_IRQ (GIC_SPI_START + 50) +#define SMMU_VPE_CB_SC_SECURE_IRQ (GIC_SPI_START + 51) +#define SMMU_VPE_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 52) +#define SMMU_VFE_CB_SC_SECURE_IRQ (GIC_SPI_START + 53) +#define SMMU_VFE_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 54) +#define SMMU_VCODEC_B_CB_SC_SECURE_IRQ (GIC_SPI_START + 55) +#define SMMU_VCODEC_B_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 56) +#define SMMU_VCODEC_A_CB_SC_SECURE_IRQ (GIC_SPI_START + 57) +#define SMMU_VCODEC_A_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 58) +#define SMMU_ROT_CB_SC_SECURE_IRQ (GIC_SPI_START + 59) +#define SMMU_ROT_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 60) +#define SMMU_MDP1_CB_SC_SECURE_IRQ (GIC_SPI_START + 61) +#define SMMU_MDP1_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 62) +#define SMMU_MDP0_CB_SC_SECURE_IRQ (GIC_SPI_START + 63) +#define SMMU_MDP0_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 64) +#define SMMU_JPEGD_CB_SC_SECURE_IRQ (GIC_SPI_START + 65) +#define SMMU_JPEGD_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 66) +#define SMMU_IJPEG_CB_SC_SECURE_IRQ (GIC_SPI_START + 67) +#define SMMU_IJPEG_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 68) +#define SMMU_GFX3D_CB_SC_SECURE_IRQ (GIC_SPI_START + 69) +#define SMMU_GFX3D_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 70) +#define SMMU_GFX2D0_CB_SC_SECURE_IRQ (GIC_SPI_START + 71) +#define SMMU_GFX2D0_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 72) +#define ROT_IRQ (GIC_SPI_START + 73) +#define MMSS_FABRIC_IRQ (GIC_SPI_START + 74) +#define MDP_IRQ (GIC_SPI_START + 75) +#define JPEGD_IRQ (GIC_SPI_START + 76) +#define JPEG_IRQ (GIC_SPI_START + 77) +#define MMSS_IMEM_IRQ (GIC_SPI_START + 78) +#define HDMI_IRQ (GIC_SPI_START + 79) +#define GFX3D_IRQ (GIC_SPI_START + 80) +#define GFX2D0_IRQ (GIC_SPI_START + 81) +#define DSI1_IRQ (GIC_SPI_START + 82) +#define CSI_1_IRQ (GIC_SPI_START + 83) +#define CSI_0_IRQ (GIC_SPI_START + 84) +#define LPASS_SCSS_AUDIO_IF_OUT0_IRQ (GIC_SPI_START + 85) +#define LPASS_SCSS_MIDI_IRQ (GIC_SPI_START + 86) +#define LPASS_Q6SS_WDOG_EXPIRED (GIC_SPI_START + 87) +#define LPASS_SCSS_GP_LOW_IRQ (GIC_SPI_START + 88) +#define LPASS_SCSS_GP_MEDIUM_IRQ (GIC_SPI_START + 89) +#define LPASS_SCSS_GP_HIGH_IRQ (GIC_SPI_START + 90) +#define TOP_IMEM_IRQ (GIC_SPI_START + 91) +#define FABRIC_SYS_IRQ (GIC_SPI_START + 92) +#define FABRIC_APPS_IRQ (GIC_SPI_START + 93) +#define USB1_HS_BAM_IRQ (GIC_SPI_START + 94) +#define SDC4_BAM_IRQ (GIC_SPI_START + 95) +#define SDC3_BAM_IRQ (GIC_SPI_START + 96) +#define SDC2_BAM_IRQ (GIC_SPI_START + 97) +#define SDC1_BAM_IRQ (GIC_SPI_START + 98) +#define FABRIC_SPS_IRQ (GIC_SPI_START + 99) +#define USB1_HS_IRQ (GIC_SPI_START + 100) +#define SDC4_IRQ_0 (GIC_SPI_START + 101) +#define SDC3_IRQ_0 (GIC_SPI_START + 102) +#define SDC2_IRQ_0 (GIC_SPI_START + 103) +#define SDC1_IRQ_0 (GIC_SPI_START + 104) +#define SPS_BAM_DMA_IRQ (GIC_SPI_START + 105) +#define SPS_SEC_VIOL_IRQ (GIC_SPI_START + 106) +#define SPS_MTI_0 (GIC_SPI_START + 107) +#define SPS_MTI_1 (GIC_SPI_START + 108) +#define SPS_MTI_2 (GIC_SPI_START + 109) +#define SPS_MTI_3 (GIC_SPI_START + 110) +#define SPS_MTI_4 (GIC_SPI_START + 111) +#define SPS_MTI_5 (GIC_SPI_START + 112) +#define SPS_MTI_6 (GIC_SPI_START + 113) +#define SPS_MTI_7 (GIC_SPI_START + 114) +#define SPS_MTI_8 (GIC_SPI_START + 115) +#define SPS_MTI_9 (GIC_SPI_START + 116) +#define SPS_MTI_10 (GIC_SPI_START + 117) +#define SPS_MTI_11 (GIC_SPI_START + 118) +#define SPS_MTI_12 (GIC_SPI_START + 119) +#define SPS_MTI_13 (GIC_SPI_START + 120) +#define SPS_MTI_14 (GIC_SPI_START + 121) +#define SPS_MTI_15 (GIC_SPI_START + 122) +#define SPS_MTI_16 (GIC_SPI_START + 123) +#define SPS_MTI_17 (GIC_SPI_START + 124) +#define SPS_MTI_18 (GIC_SPI_START + 125) +#define SPS_MTI_19 (GIC_SPI_START + 126) +#define SPS_MTI_20 (GIC_SPI_START + 127) +#define SPS_MTI_21 (GIC_SPI_START + 128) +#define SPS_MTI_22 (GIC_SPI_START + 129) +#define SPS_MTI_23 (GIC_SPI_START + 130) +#define SPS_MTI_24 (GIC_SPI_START + 131) +#define SPS_MTI_25 (GIC_SPI_START + 132) +#define SPS_MTI_26 (GIC_SPI_START + 133) +#define SPS_MTI_27 (GIC_SPI_START + 134) +#define SPS_MTI_28 (GIC_SPI_START + 135) +#define SPS_MTI_29 (GIC_SPI_START + 136) +#define SPS_MTI_30 (GIC_SPI_START + 137) +#define SPS_MTI_31 (GIC_SPI_START + 138) +#define CSIPHY_4LN_IRQ (GIC_SPI_START + 139) +#define CSIPHY_2LN_IRQ (GIC_SPI_START + 140) +#define USB2_IRQ (GIC_SPI_START + 141) +#define USB1_IRQ (GIC_SPI_START + 142) +#define TSSC_SSBI_IRQ (GIC_SPI_START + 143) +#define TSSC_SAMPLE_IRQ (GIC_SPI_START + 144) +#define TSSC_PENUP_IRQ (GIC_SPI_START + 145) +#define GSBI1_UARTDM_IRQ (GIC_SPI_START + 146) +#define GSBI1_QUP_IRQ (GIC_SPI_START + 147) +#define GSBI2_UARTDM_IRQ (GIC_SPI_START + 148) +#define GSBI2_QUP_IRQ (GIC_SPI_START + 149) +#define GSBI3_UARTDM_IRQ (GIC_SPI_START + 150) +#define GSBI3_QUP_IRQ (GIC_SPI_START + 151) +#define GSBI4_UARTDM_IRQ (GIC_SPI_START + 152) +#define GSBI4_QUP_IRQ (GIC_SPI_START + 153) +#define GSBI5_UARTDM_IRQ (GIC_SPI_START + 154) +#define GSBI5_QUP_IRQ (GIC_SPI_START + 155) +#define GSBI6_UARTDM_IRQ (GIC_SPI_START + 156) +#define GSBI6_QUP_IRQ (GIC_SPI_START + 157) +#define GSBI7_UARTDM_IRQ (GIC_SPI_START + 158) +#define GSBI7_QUP_IRQ (GIC_SPI_START + 159) +#define GSBI8_UARTDM_IRQ (GIC_SPI_START + 160) +#define GSBI8_QUP_IRQ (GIC_SPI_START + 161) +#define TSIF_TSPP_IRQ (GIC_SPI_START + 162) +#define TSIF_BAM_IRQ (GIC_SPI_START + 163) +#define TSIF2_IRQ (GIC_SPI_START + 164) +#define TSIF1_IRQ (GIC_SPI_START + 165) +#define DSI2_IRQ (GIC_SPI_START + 166) +#define ISPIF_IRQ (GIC_SPI_START + 167) +#define MSMC_SC_SEC_TMR_IRQ (GIC_SPI_START + 168) +#define MSMC_SC_SEC_WDOG_BARK_IRQ (GIC_SPI_START + 169) +#define INT_ADM0_SCSS_0_IRQ (GIC_SPI_START + 170) +#define INT_ADM0_SCSS_1_IRQ (GIC_SPI_START + 171) +#define INT_ADM0_SCSS_2_IRQ (GIC_SPI_START + 172) +#define INT_ADM0_SCSS_3_IRQ (GIC_SPI_START + 173) +#define CC_SCSS_WDT1CPU1BITEEXPIRED (GIC_SPI_START + 174) +#define CC_SCSS_WDT1CPU0BITEEXPIRED (GIC_SPI_START + 175) +#define CC_SCSS_WDT0CPU1BITEEXPIRED (GIC_SPI_START + 176) +#define CC_SCSS_WDT0CPU0BITEEXPIRED (GIC_SPI_START + 177) +#define TSENS_UPPER_LOWER_INT (GIC_SPI_START + 178) +#define SSBI2_2_SC_CPU1_SECURE_INT (GIC_SPI_START + 179) +#define SSBI2_2_SC_CPU1_NON_SECURE_INT (GIC_SPI_START + 180) +#define SSBI2_1_SC_CPU1_SECURE_INT (GIC_SPI_START + 181) +#define SSBI2_1_SC_CPU1_NON_SECURE_INT (GIC_SPI_START + 182) +#define XPU_SUMMARY_IRQ (GIC_SPI_START + 183) +#define BUS_EXCEPTION_SUMMARY_IRQ (GIC_SPI_START + 184) +#define HSDDRX_EBI1CH0_IRQ (GIC_SPI_START + 185) +#define HSDDRX_EBI1CH1_IRQ (GIC_SPI_START + 186) +#define SDC5_BAM_IRQ (GIC_SPI_START + 187) +#define SDC5_IRQ_0 (GIC_SPI_START + 188) +#define GSBI9_UARTDM_IRQ (GIC_SPI_START + 189) +#define GSBI9_QUP_IRQ (GIC_SPI_START + 190) +#define GSBI10_UARTDM_IRQ (GIC_SPI_START + 191) +#define GSBI10_QUP_IRQ (GIC_SPI_START + 192) +#define GSBI11_UARTDM_IRQ (GIC_SPI_START + 193) +#define GSBI11_QUP_IRQ (GIC_SPI_START + 194) +#define GSBI12_UARTDM_IRQ (GIC_SPI_START + 195) +#define GSBI12_QUP_IRQ (GIC_SPI_START + 196) +#define RIVA_APSS_LTECOEX_IRQ (GIC_SPI_START + 197) +#define RIVA_APSS_SPARE_IRQ (GIC_SPI_START + 198) +#define RIVA_APSS_WDOG_BITE_RESET_RDY_IRQ (GIC_SPI_START + 199) +#define RIVA_ASS_RESET_DONE_IRQ (GIC_SPI_START + 200) +#define RIVA_APSS_ASIC_IRQ (GIC_SPI_START + 201) +#define RIVA_APPS_WLAN_RX_DATA_AVAIL_IRQ (GIC_SPI_START + 202) +#define RIVA_APPS_WLAN_DATA_XFER_DONE_IRQ (GIC_SPI_START + 203) +#define RIVA_APPS_WLAM_SMSM_IRQ (GIC_SPI_START + 204) +#define RIVA_APPS_LOG_CTRL_IRQ (GIC_SPI_START + 205) +#define RIVA_APPS_FM_CTRL_IRQ (GIC_SPI_START + 206) +#define RIVA_APPS_HCI_IRQ (GIC_SPI_START + 207) +#define RIVA_APPS_WLAN_CTRL_IRQ (GIC_SPI_START + 208) +#define A2_BAM_IRQ (GIC_SPI_START + 209) +#define SMMU_GFX2D1_CB_SC_SECURE_IRQ (GIC_SPI_START + 210) +#define SMMU_GFX2D1_CB_SC_NON_SECURE_IRQ (GIC_SPI_START + 211) +#define GFX2D1_IRQ (GIC_SPI_START + 212) +#define PPSS_WDOG_TIMER_IRQ (GIC_SPI_START + 213) +#define SPS_SLIMBUS_CORE_EE0_IRQ (GIC_SPI_START + 214) +#define SPS_SLIMBUS_BAM_EE0_IRQ (GIC_SPI_START + 215) +#define QDSS_ETB_IRQ (GIC_SPI_START + 216) +#define QDSS_CTI2KPSS_CPU1_IRQ (GIC_SPI_START + 217) +#define QDSS_CTI2KPSS_CPU0_IRQ (GIC_SPI_START + 218) +#define TLMM_APCC_DIR_CONN_IRQ_16 (GIC_SPI_START + 219) +#define TLMM_APCC_DIR_CONN_IRQ_17 (GIC_SPI_START + 220) +#define TLMM_APCC_DIR_CONN_IRQ_18 (GIC_SPI_START + 221) +#define TLMM_APCC_DIR_CONN_IRQ_19 (GIC_SPI_START + 222) +#define TLMM_APCC_DIR_CONN_IRQ_20 (GIC_SPI_START + 223) +#define TLMM_APCC_DIR_CONN_IRQ_21 (GIC_SPI_START + 224) +#define PM8921_SEC_IRQ_104 (GIC_SPI_START + 225) +#define PM8018_SEC_IRQ_107 (GIC_SPI_START + 226) + +/* For now, use the maximum number of interrupts until a pending GIC issue + * is sorted out */ +#define NR_MSM_IRQS 1020 +#define NR_BOARD_IRQS 0 +#define NR_GPIO_IRQS 0 + +#endif + diff --git a/arch/arm/mach-msm/include/mach/irqs.h b/arch/arm/mach-msm/include/mach/irqs.h index 8679a456474..3cd78b165ab 100644 --- a/arch/arm/mach-msm/include/mach/irqs.h +++ b/arch/arm/mach-msm/include/mach/irqs.h @@ -26,6 +26,9 @@ #include "sirc.h" #elif defined(CONFIG_ARCH_MSM8X60) #include "irqs-8x60.h" +#elif defined(CONFIG_ARCH_MSM8960) +/* TODO: Make these not generic. */ +#include "irqs-8960.h" #elif defined(CONFIG_ARCH_MSM_ARM11) #include "irqs-7x00.h" #else -- cgit v1.2.3-18-g5258 From b83ce5812a1581655df8d1502398f03408539ba5 Mon Sep 17 00:00:00 2001 From: David Brown Date: Wed, 12 Jan 2011 12:55:16 -0800 Subject: msm: Add MSM 8960 cpu_is check Signed-off-by: David Brown --- arch/arm/mach-msm/include/mach/cpu.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-msm/include/mach/cpu.h b/arch/arm/mach-msm/include/mach/cpu.h index e1ba9db3714..a9481b08d5c 100644 --- a/arch/arm/mach-msm/include/mach/cpu.h +++ b/arch/arm/mach-msm/include/mach/cpu.h @@ -24,6 +24,7 @@ #define cpu_is_msm7x30() 0 #define cpu_is_qsd8x50() 0 #define cpu_is_msm8x60() 0 +#define cpu_is_msm8960() 0 #ifdef CONFIG_ARCH_MSM7X00A # undef cpu_is_msm7x01 @@ -45,4 +46,9 @@ # define cpu_is_msm8x60() 1 #endif +#ifdef CONFIG_ARCH_MSM8960 +# undef cpu_is_msm8960 +# define cpu_is_msm8960() 1 +#endif + #endif -- cgit v1.2.3-18-g5258 From a81c8c38ed06c5f59d62a2257d21ed02d2af38fe Mon Sep 17 00:00:00 2001 From: Stepan Moskovchenko Date: Wed, 1 Dec 2010 19:25:14 -0800 Subject: msm: timer: Timer support for MSM8960 Modify the macros in the MSM timer driver to support the MSM8960 chip. Signed-off-by: Stepan Moskovchenko Signed-off-by: David Brown --- arch/arm/mach-msm/timer.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index 5548b156cff..e7f8e5a4d48 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -55,7 +55,8 @@ enum timer_location { #if defined(CONFIG_ARCH_QSD8X50) #define DGT_HZ (19200000 / 4) /* 19.2 MHz / 4 by default */ #define MSM_DGT_SHIFT (0) -#elif defined(CONFIG_ARCH_MSM7X30) || defined(CONFIG_ARCH_MSM8X60) +#elif defined(CONFIG_ARCH_MSM7X30) || defined(CONFIG_ARCH_MSM8X60) || \ + defined(CONFIG_ARCH_MSM8960) #define DGT_HZ (24576000 / 4) /* 24.576 MHz (LPXO) / 4 by default */ #define MSM_DGT_SHIFT (0) #else @@ -214,7 +215,7 @@ static void __init msm_timer_init(void) } else if (cpu_is_qsd8x50()) { msm_clocks[MSM_CLOCK_GPT].regbase = MSM_CSR_BASE; msm_clocks[MSM_CLOCK_DGT].regbase = MSM_CSR_BASE + 0x10; - } else if (cpu_is_msm8x60()) { + } else if (cpu_is_msm8x60() || cpu_is_msm8960()) { msm_clocks[MSM_CLOCK_GPT].regbase = MSM_TMR_BASE + 0x04; msm_clocks[MSM_CLOCK_DGT].regbase = MSM_TMR_BASE + 0x24; -- cgit v1.2.3-18-g5258 From decd4a9d3671cd95a46ca0e004700077d81c370d Mon Sep 17 00:00:00 2001 From: Stepan Moskovchenko Date: Thu, 9 Dec 2010 19:16:13 -0800 Subject: msm: Makefile cleanup Clean up some of the conditionals in the Makefile in preparation for adding build support for MSM8960. Signed-off-by: Stepan Moskovchenko Signed-off-by: David Brown --- arch/arm/mach-msm/Makefile | 18 ++++++------------ 1 file changed, 6 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index 94195c190e1..3e15ff3bffb 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -1,21 +1,15 @@ obj-y += io.o idle.o timer.o -ifndef CONFIG_ARCH_MSM8X60 -obj-y += acpuclock-arm11.o -obj-y += dma.o -endif -ifdef CONFIG_MSM_VIC -obj-y += irq-vic.o -else -ifndef CONFIG_ARCH_MSM8X60 -obj-y += irq.o -endif -endif +obj-$(CONFIG_MSM_VIC) += irq-vic.o +obj-$(CONFIG_ARCH_MSM7X00A) += dma.o irq.o acpuclock-arm11.o +obj-$(CONFIG_ARCH_MSM7X30) += dma.o +obj-$(CONFIG_ARCH_QSD8X50) += dma.o sirc.o obj-$(CONFIG_ARCH_MSM8X60) += clock-dummy.o iommu.o iommu_dev.o devices-msm8x60-iommu.o + obj-$(CONFIG_MSM_PROC_COMM) += proc_comm.o clock-pcom.o vreg.o obj-$(CONFIG_MSM_PROC_COMM) += clock.o -obj-$(CONFIG_ARCH_QSD8X50) += sirc.o + obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o obj-$(CONFIG_MSM_SMD) += last_radio_log.o obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o -- cgit v1.2.3-18-g5258 From f441ca2d403cf74ebffbc07a3ccd402efd995799 Mon Sep 17 00:00:00 2001 From: Stepan Moskovchenko Date: Wed, 1 Dec 2010 19:31:16 -0800 Subject: msm: Support for the MSM8960 Simulator target Add the board file, Kconfig options, and Makefile options needed to build for the MSM8960 Simulator target. Signed-off-by: Stepan Moskovchenko Signed-off-by: David Brown --- arch/arm/mach-msm/Kconfig | 16 +++++++++++ arch/arm/mach-msm/Makefile | 5 ++++ arch/arm/mach-msm/board-msm8960.c | 58 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 79 insertions(+) create mode 100644 arch/arm/mach-msm/board-msm8960.c (limited to 'arch') diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index 5d3d9ade12f..adca96ca409 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -48,6 +48,16 @@ config ARCH_MSM8X60 select IOMMU_API select MSM_SCM if SMP +config ARCH_MSM8960 + bool "MSM8960" + select ARCH_MSM_SCORPIONMP + select MACH_MSM8960_SIM + select ARM_GIC + select CPU_V7 + select MSM_V2_TLMM + select MSM_GPIOMUX + select MSM_SCM if SMP + endchoice config MSM_SOC_REV_A @@ -125,6 +135,12 @@ config MACH_MSM8X60_FFA help Support for the Qualcomm MSM8x60 FFA eval board. +config MACH_MSM8960_SIM + depends on ARCH_MSM8960 + bool "MSM8960 Simulator" + help + Support for the Qualcomm MSM8960 simulator. + endmenu config IOMMU_PGTABLES_L2 diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index 3e15ff3bffb..02294279290 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_ARCH_MSM7X00A) += dma.o irq.o acpuclock-arm11.o obj-$(CONFIG_ARCH_MSM7X30) += dma.o obj-$(CONFIG_ARCH_QSD8X50) += dma.o sirc.o obj-$(CONFIG_ARCH_MSM8X60) += clock-dummy.o iommu.o iommu_dev.o devices-msm8x60-iommu.o +obj-$(CONFIG_ARCH_MSM8960) += clock-dummy.o obj-$(CONFIG_MSM_PROC_COMM) += proc_comm.o clock-pcom.o vreg.o obj-$(CONFIG_MSM_PROC_COMM) += clock.o @@ -23,12 +24,16 @@ obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o obj-$(CONFIG_ARCH_MSM8X60) += board-msm8x60.o +obj-$(CONFIG_ARCH_MSM8960) += board-msm8960.o obj-$(CONFIG_ARCH_MSM7X30) += gpiomux-7x30.o gpiomux-v1.o gpiomux.o obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o gpiomux-v1.o gpiomux.o obj-$(CONFIG_ARCH_MSM8X60) += gpiomux-8x60.o gpiomux-v2.o gpiomux.o ifdef CONFIG_MSM_V2_TLMM +ifndef CONFIG_ARCH_MSM8960 +# TODO: TLMM Mapping issues need to be resolved obj-y += gpio-v2.o +endif else obj-y += gpio.o endif diff --git a/arch/arm/mach-msm/board-msm8960.c b/arch/arm/mach-msm/board-msm8960.c new file mode 100644 index 00000000000..90efd5472be --- /dev/null +++ b/arch/arm/mach-msm/board-msm8960.c @@ -0,0 +1,58 @@ +/* Copyright (c) 2011, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + */ +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + +static void __init msm8960_map_io(void) +{ + msm_map_msm8960_io(); +} + +static void __init msm8960_init_irq(void) +{ + unsigned int i; + gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE, + (void *)MSM_QGIC_CPU_BASE); + + /* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */ + writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4); + + /* FIXME: Not installing AVS_SVICINT and AVS_SVICINTSWDONE yet + * as they are configured as level, which does not play nice with + * handle_percpu_irq. + */ + for (i = GIC_PPI_START; i < GIC_SPI_START; i++) { + if (i != AVS_SVICINT && i != AVS_SVICINTSWDONE) + set_irq_handler(i, handle_percpu_irq); + } +} + +MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR") + .map_io = msm8960_map_io, + .init_irq = msm8960_init_irq, + .timer = &msm_timer, +MACHINE_END -- cgit v1.2.3-18-g5258 From 50ede4e39aa5b61685ca87f58422478b1a538ca8 Mon Sep 17 00:00:00 2001 From: Stepan Moskovchenko Date: Mon, 13 Dec 2010 18:12:19 -0800 Subject: msm: Support for the MSM8960 RUMI3 target Add the machine record, init code, and build support for the MSM8960 RUMI3. Signed-off-by: Stepan Moskovchenko Signed-off-by: David Brown --- arch/arm/mach-msm/Kconfig | 8 +++++++- arch/arm/mach-msm/board-msm8960.c | 10 ++++++++++ 2 files changed, 17 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index adca96ca409..df9d74eaa47 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -51,7 +51,7 @@ config ARCH_MSM8X60 config ARCH_MSM8960 bool "MSM8960" select ARCH_MSM_SCORPIONMP - select MACH_MSM8960_SIM + select MACH_MSM8960_SIM if (!MACH_MSM8960_RUMI3) select ARM_GIC select CPU_V7 select MSM_V2_TLMM @@ -141,6 +141,12 @@ config MACH_MSM8960_SIM help Support for the Qualcomm MSM8960 simulator. +config MACH_MSM8960_RUMI3 + depends on ARCH_MSM8960 + bool "MSM8960 RUMI3" + help + Support for the Qualcomm MSM8960 RUMI3 emulator. + endmenu config IOMMU_PGTABLES_L2 diff --git a/arch/arm/mach-msm/board-msm8960.c b/arch/arm/mach-msm/board-msm8960.c index 90efd5472be..2b095735f14 100644 --- a/arch/arm/mach-msm/board-msm8960.c +++ b/arch/arm/mach-msm/board-msm8960.c @@ -41,6 +41,9 @@ static void __init msm8960_init_irq(void) /* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */ writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4); + if (machine_is_msm8960_rumi3()) + writel(0x0000FFFF, MSM_QGIC_DIST_BASE + GIC_DIST_ENABLE_SET); + /* FIXME: Not installing AVS_SVICINT and AVS_SVICINTSWDONE yet * as they are configured as level, which does not play nice with * handle_percpu_irq. @@ -56,3 +59,10 @@ MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR") .init_irq = msm8960_init_irq, .timer = &msm_timer, MACHINE_END + +MACHINE_START(MSM8960_RUMI3, "QCT MSM8960 RUMI3") + .map_io = msm8960_map_io, + .init_irq = msm8960_init_irq, + .timer = &msm_timer, +MACHINE_END + -- cgit v1.2.3-18-g5258 From d41cb8c95681345ded5ef1e78d235d06d68baee2 Mon Sep 17 00:00:00 2001 From: Stepan Moskovchenko Date: Mon, 17 Jan 2011 20:33:32 -0800 Subject: msm: Add name field to UART resources Add a name field to the I/O resources for the UARTs on MSM targets in preparation for updates to the msm_serial driver. The driver assumed there is one I/O resource per UART, which is not the case on all targets. Signed-off-by: Stepan Moskovchenko Signed-off-by: David Brown --- arch/arm/mach-msm/devices-msm7x00.c | 3 +++ arch/arm/mach-msm/devices-msm7x30.c | 3 ++- arch/arm/mach-msm/devices-qsd8x50.c | 3 ++- 3 files changed, 7 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-msm/devices-msm7x00.c b/arch/arm/mach-msm/devices-msm7x00.c index fb548a8a21d..2549fb23ee9 100644 --- a/arch/arm/mach-msm/devices-msm7x00.c +++ b/arch/arm/mach-msm/devices-msm7x00.c @@ -38,6 +38,7 @@ static struct resource resources_uart1[] = { .start = MSM_UART1_PHYS, .end = MSM_UART1_PHYS + MSM_UART1_SIZE - 1, .flags = IORESOURCE_MEM, + .name = "uart_resource" }, }; @@ -51,6 +52,7 @@ static struct resource resources_uart2[] = { .start = MSM_UART2_PHYS, .end = MSM_UART2_PHYS + MSM_UART2_SIZE - 1, .flags = IORESOURCE_MEM, + .name = "uart_resource" }, }; @@ -64,6 +66,7 @@ static struct resource resources_uart3[] = { .start = MSM_UART3_PHYS, .end = MSM_UART3_PHYS + MSM_UART3_SIZE - 1, .flags = IORESOURCE_MEM, + .name = "uart_resource" }, }; diff --git a/arch/arm/mach-msm/devices-msm7x30.c b/arch/arm/mach-msm/devices-msm7x30.c index 4e9a0ab3e93..d4c7afccbdb 100644 --- a/arch/arm/mach-msm/devices-msm7x30.c +++ b/arch/arm/mach-msm/devices-msm7x30.c @@ -1,6 +1,6 @@ /* * Copyright (C) 2008 Google, Inc. - * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved. + * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved. * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -41,6 +41,7 @@ static struct resource resources_uart2[] = { .start = MSM_UART2_PHYS, .end = MSM_UART2_PHYS + MSM_UART2_SIZE - 1, .flags = IORESOURCE_MEM, + .name = "uart_resource" }, }; diff --git a/arch/arm/mach-msm/devices-qsd8x50.c b/arch/arm/mach-msm/devices-qsd8x50.c index a4b798f20cc..93bddacad90 100644 --- a/arch/arm/mach-msm/devices-qsd8x50.c +++ b/arch/arm/mach-msm/devices-qsd8x50.c @@ -1,6 +1,6 @@ /* * Copyright (C) 2008 Google, Inc. - * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved. + * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved. * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -38,6 +38,7 @@ static struct resource resources_uart3[] = { .start = MSM_UART3_PHYS, .end = MSM_UART3_PHYS + MSM_UART3_SIZE - 1, .flags = IORESOURCE_MEM, + .name = "uart_resource" }, }; -- cgit v1.2.3-18-g5258 From 7a89248a47d201e6ade2daddd79b0fd902cad400 Mon Sep 17 00:00:00 2001 From: Sahitya Tummala Date: Tue, 18 Jan 2011 11:22:49 +0530 Subject: mmc: msm_sdcc: Add gpio handling function to driver Configure SDCC GPIOs when the host is powered up or powered off. Signed-off-by: Sahitya Tummala --- arch/arm/mach-msm/include/mach/mmc.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-msm/include/mach/mmc.h b/arch/arm/mach-msm/include/mach/mmc.h index d54b6b086cf..5631b51cec4 100644 --- a/arch/arm/mach-msm/include/mach/mmc.h +++ b/arch/arm/mach-msm/include/mach/mmc.h @@ -15,12 +15,23 @@ struct embedded_sdio_data { int num_funcs; }; +struct msm_mmc_gpio { + unsigned no; + const char *name; +}; + +struct msm_mmc_gpio_data { + struct msm_mmc_gpio *gpio; + u8 size; +}; + struct msm_mmc_platform_data { unsigned int ocr_mask; /* available voltages */ u32 (*translate_vdd)(struct device *, unsigned int); unsigned int (*status)(struct device *); struct embedded_sdio_data *embedded_sdio; int (*register_status_notify)(void (*callback)(int card_present, void *dev_id), void *dev_id); + struct msm_mmc_gpio_data *gpio_data; }; #endif -- cgit v1.2.3-18-g5258 From 8b4d95fc76b85696c508f316810a6fbc15a7b8c5 Mon Sep 17 00:00:00 2001 From: Sahitya Tummala Date: Tue, 18 Jan 2011 11:22:50 +0530 Subject: msm: 8x50: Add initial support for SDCC Signed-off-by: Sahitya Tummala --- arch/arm/mach-msm/board-qsd8x50.c | 81 +++++++++- arch/arm/mach-msm/devices-qsd8x50.c | 196 ++++++++++++++++++++++++ arch/arm/mach-msm/gpiomux-8x50.c | 23 +++ arch/arm/mach-msm/include/mach/msm_iomap-8x50.h | 8 +- 4 files changed, 303 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c index 2e8391307f5..12863f79143 100644 --- a/arch/arm/mach-msm/board-qsd8x50.c +++ b/arch/arm/mach-msm/board-qsd8x50.c @@ -1,4 +1,4 @@ -/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved. +/* Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and @@ -21,6 +21,7 @@ #include #include #include +#include #include #include @@ -31,6 +32,8 @@ #include #include #include +#include +#include #include "devices.h" @@ -95,6 +98,81 @@ static struct platform_device *devices[] __initdata = { &msm_device_hsusb_host, }; +static struct msm_mmc_gpio sdc1_gpio_cfg[] = { + {51, "sdc1_dat_3"}, + {52, "sdc1_dat_2"}, + {53, "sdc1_dat_1"}, + {54, "sdc1_dat_0"}, + {55, "sdc1_cmd"}, + {56, "sdc1_clk"} +}; + +static struct vreg *vreg_mmc; +static unsigned long vreg_sts; + +static uint32_t msm_sdcc_setup_power(struct device *dv, unsigned int vdd) +{ + int rc = 0; + struct platform_device *pdev; + + pdev = container_of(dv, struct platform_device, dev); + + if (vdd == 0) { + if (!vreg_sts) + return 0; + + clear_bit(pdev->id, &vreg_sts); + + if (!vreg_sts) { + rc = vreg_disable(vreg_mmc); + if (rc) + pr_err("vreg_mmc disable failed for slot " + "%d: %d\n", pdev->id, rc); + } + return 0; + } + + if (!vreg_sts) { + rc = vreg_set_level(vreg_mmc, 2900); + if (rc) + pr_err("vreg_mmc set level failed for slot %d: %d\n", + pdev->id, rc); + rc = vreg_enable(vreg_mmc); + if (rc) + pr_err("vreg_mmc enable failed for slot %d: %d\n", + pdev->id, rc); + } + set_bit(pdev->id, &vreg_sts); + return 0; +} + +static struct msm_mmc_gpio_data sdc1_gpio = { + .gpio = sdc1_gpio_cfg, + .size = ARRAY_SIZE(sdc1_gpio_cfg), +}; + +static struct msm_mmc_platform_data qsd8x50_sdc1_data = { + .ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29, + .translate_vdd = msm_sdcc_setup_power, + .gpio_data = &sdc1_gpio, +}; + +static void __init qsd8x50_init_mmc(void) +{ + if (machine_is_qsd8x50_ffa() || machine_is_qsd8x50a_ffa()) + vreg_mmc = vreg_get(NULL, "gp6"); + else + vreg_mmc = vreg_get(NULL, "gp5"); + + if (IS_ERR(vreg_mmc)) { + pr_err("vreg get for vreg_mmc failed (%ld)\n", + PTR_ERR(vreg_mmc)); + return; + } + + msm_add_sdcc(1, &qsd8x50_sdc1_data, 0, 0); +} + static void __init qsd8x50_map_io(void) { msm_map_qsd8x50_io(); @@ -113,6 +191,7 @@ static void __init qsd8x50_init(void) msm_device_hsusb.dev.parent = &msm_device_otg.dev; msm_device_hsusb_host.dev.parent = &msm_device_otg.dev; platform_add_devices(devices, ARRAY_SIZE(devices)); + qsd8x50_init_mmc(); } MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF") diff --git a/arch/arm/mach-msm/devices-qsd8x50.c b/arch/arm/mach-msm/devices-qsd8x50.c index a4b798f20cc..b1a8f0f680a 100644 --- a/arch/arm/mach-msm/devices-qsd8x50.c +++ b/arch/arm/mach-msm/devices-qsd8x50.c @@ -124,6 +124,194 @@ struct platform_device msm_device_hsusb_host = { }, }; +static struct resource resources_sdc1[] = { + { + .start = MSM_SDC1_PHYS, + .end = MSM_SDC1_PHYS + MSM_SDC1_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_SDC1_0, + .end = INT_SDC1_0, + .flags = IORESOURCE_IRQ, + .name = "cmd_irq", + }, + { + .start = INT_SDC1_1, + .end = INT_SDC1_1, + .flags = IORESOURCE_IRQ, + .name = "pio_irq", + }, + { + .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED, + .name = "status_irq" + }, + { + .start = 8, + .end = 8, + .flags = IORESOURCE_DMA, + }, +}; + +static struct resource resources_sdc2[] = { + { + .start = MSM_SDC2_PHYS, + .end = MSM_SDC2_PHYS + MSM_SDC2_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_SDC2_0, + .end = INT_SDC2_0, + .flags = IORESOURCE_IRQ, + .name = "cmd_irq", + }, + { + .start = INT_SDC2_1, + .end = INT_SDC2_1, + .flags = IORESOURCE_IRQ, + .name = "pio_irq", + }, + { + .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED, + .name = "status_irq" + }, + { + .start = 8, + .end = 8, + .flags = IORESOURCE_DMA, + }, +}; + +static struct resource resources_sdc3[] = { + { + .start = MSM_SDC3_PHYS, + .end = MSM_SDC3_PHYS + MSM_SDC3_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_SDC3_0, + .end = INT_SDC3_0, + .flags = IORESOURCE_IRQ, + .name = "cmd_irq", + }, + { + .start = INT_SDC3_1, + .end = INT_SDC3_1, + .flags = IORESOURCE_IRQ, + .name = "pio_irq", + }, + { + .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED, + .name = "status_irq" + }, + { + .start = 8, + .end = 8, + .flags = IORESOURCE_DMA, + }, +}; + +static struct resource resources_sdc4[] = { + { + .start = MSM_SDC4_PHYS, + .end = MSM_SDC4_PHYS + MSM_SDC4_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_SDC4_0, + .end = INT_SDC4_0, + .flags = IORESOURCE_IRQ, + .name = "cmd_irq", + }, + { + .start = INT_SDC4_1, + .end = INT_SDC4_1, + .flags = IORESOURCE_IRQ, + .name = "pio_irq", + }, + { + .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED, + .name = "status_irq" + }, + { + .start = 8, + .end = 8, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device msm_device_sdc1 = { + .name = "msm_sdcc", + .id = 1, + .num_resources = ARRAY_SIZE(resources_sdc1), + .resource = resources_sdc1, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, +}; + +struct platform_device msm_device_sdc2 = { + .name = "msm_sdcc", + .id = 2, + .num_resources = ARRAY_SIZE(resources_sdc2), + .resource = resources_sdc2, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, +}; + +struct platform_device msm_device_sdc3 = { + .name = "msm_sdcc", + .id = 3, + .num_resources = ARRAY_SIZE(resources_sdc3), + .resource = resources_sdc3, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, +}; + +struct platform_device msm_device_sdc4 = { + .name = "msm_sdcc", + .id = 4, + .num_resources = ARRAY_SIZE(resources_sdc4), + .resource = resources_sdc4, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, +}; + +static struct platform_device *msm_sdcc_devices[] __initdata = { + &msm_device_sdc1, + &msm_device_sdc2, + &msm_device_sdc3, + &msm_device_sdc4, +}; + +int __init msm_add_sdcc(unsigned int controller, + struct msm_mmc_platform_data *plat, + unsigned int stat_irq, unsigned long stat_irq_flags) +{ + struct platform_device *pdev; + struct resource *res; + + if (controller < 1 || controller > 4) + return -EINVAL; + + pdev = msm_sdcc_devices[controller-1]; + pdev->dev.platform_data = plat; + + res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "status_irq"); + if (!res) + return -EINVAL; + else if (stat_irq) { + res->start = res->end = stat_irq; + res->flags &= ~IORESOURCE_DISABLED; + res->flags |= stat_irq_flags; + } + + return platform_device_register(pdev); +} + struct clk msm_clocks_8x50[] = { CLK_PCOM("adm_clk", ADM_CLK, NULL, 0), CLK_PCOM("ebi1_clk", EBI1_CLK, NULL, CLK_MIN), @@ -144,6 +332,14 @@ struct clk msm_clocks_8x50[] = { CLK_PCOM("pbus_clk", PBUS_CLK, NULL, CLK_MIN), CLK_PCOM("pcm_clk", PCM_CLK, NULL, 0), CLK_PCOM("sdac_clk", SDAC_CLK, NULL, OFF), + CLK_PCOM("sdc_clk", SDC1_CLK, &msm_device_sdc1.dev, OFF), + CLK_PCOM("sdc_pclk", SDC1_P_CLK, &msm_device_sdc1.dev, OFF), + CLK_PCOM("sdc_clk", SDC2_CLK, &msm_device_sdc2.dev, OFF), + CLK_PCOM("sdc_pclk", SDC2_P_CLK, &msm_device_sdc2.dev, OFF), + CLK_PCOM("sdc_clk", SDC3_CLK, &msm_device_sdc3.dev, OFF), + CLK_PCOM("sdc_pclk", SDC3_P_CLK, &msm_device_sdc3.dev, OFF), + CLK_PCOM("sdc_clk", SDC4_CLK, &msm_device_sdc4.dev, OFF), + CLK_PCOM("sdc_pclk", SDC4_P_CLK, &msm_device_sdc4.dev, OFF), CLK_PCOM("spi_clk", SPI_CLK, NULL, 0), CLK_PCOM("tsif_clk", TSIF_CLK, NULL, 0), CLK_PCOM("tsif_ref_clk", TSIF_REF_CLK, NULL, 0), diff --git a/arch/arm/mach-msm/gpiomux-8x50.c b/arch/arm/mach-msm/gpiomux-8x50.c index 4406e0f4ae9..f7a4ea593c9 100644 --- a/arch/arm/mach-msm/gpiomux-8x50.c +++ b/arch/arm/mach-msm/gpiomux-8x50.c @@ -16,6 +16,19 @@ */ #include "gpiomux.h" +#if defined(CONFIG_MMC_MSM) || defined(CONFIG_MMC_MSM_MODULE) + #define SDCC_DAT_0_3_CMD_ACTV_CFG (GPIOMUX_VALID | GPIOMUX_PULL_UP\ + | GPIOMUX_FUNC_1 | GPIOMUX_DRV_8MA) + #define SDCC_CLK_ACTV_CFG (GPIOMUX_VALID | GPIOMUX_PULL_NONE\ + | GPIOMUX_FUNC_1 | GPIOMUX_DRV_8MA) +#else + #define SDCC_DAT_0_3_CMD_ACTV_CFG 0 + #define SDCC_CLK_ACTV_CFG 0 +#endif + +#define SDC1_SUSPEND_CONFIG (GPIOMUX_VALID | GPIOMUX_PULL_DOWN\ + | GPIOMUX_FUNC_GPIO | GPIOMUX_DRV_2MA) + struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = { [86] = { /* UART3 RX */ .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | @@ -25,4 +38,14 @@ struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = { .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | GPIOMUX_FUNC_1 | GPIOMUX_VALID, }, + /* SDC1 data[3:0] & CMD */ + [51 ... 55] = { + .active = SDCC_DAT_0_3_CMD_ACTV_CFG, + .suspended = SDC1_SUSPEND_CONFIG + }, + /* SDC1 CLK */ + [56] = { + .active = SDCC_CLK_ACTV_CFG, + .suspended = SDC1_SUSPEND_CONFIG + }, }; diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h index acc819eb76e..732a9657677 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h @@ -132,16 +132,16 @@ #define MSM_UART2DM_PHYS 0xA0900000 -#define MSM_SDC1_PHYS 0xA0400000 +#define MSM_SDC1_PHYS 0xA0300000 #define MSM_SDC1_SIZE SZ_4K -#define MSM_SDC2_PHYS 0xA0500000 +#define MSM_SDC2_PHYS 0xA0400000 #define MSM_SDC2_SIZE SZ_4K -#define MSM_SDC3_PHYS 0xA0600000 +#define MSM_SDC3_PHYS 0xA0500000 #define MSM_SDC3_SIZE SZ_4K -#define MSM_SDC4_PHYS 0xA0700000 +#define MSM_SDC4_PHYS 0xA0600000 #define MSM_SDC4_SIZE SZ_4K #endif -- cgit v1.2.3-18-g5258 From 7efd95f6270e210be90b94466bd3405b81e8d667 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sun, 23 Jan 2011 18:56:36 +1100 Subject: crypto: aesni-intel - Don't leak memory in rfc4106_set_hash_subkey There's a small memory leak in arch/x86/crypto/aesni-intel_glue.c::rfc4106_set_hash_subkey(). If the call to kmalloc() fails and returns NULL then the memory allocated previously by ablkcipher_request_alloc() is not freed when we leave the function. I could have just added a call to ablkcipher_request_free() before we return -ENOMEM, but that started to look too much like the code we already had at the end of the function, so I chose instead to rework the code a bit so that there are now a few labels at the end that we goto when various allocations fail, so we don't have to repeat the same blocks of code (this also reduces the object code size slightly). Signed-off-by: Jesper Juhl Signed-off-by: Herbert Xu --- arch/x86/crypto/aesni-intel_glue.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c index e1e60c7d581..e0135526345 100644 --- a/arch/x86/crypto/aesni-intel_glue.c +++ b/arch/x86/crypto/aesni-intel_glue.c @@ -873,21 +873,19 @@ rfc4106_set_hash_subkey(u8 *hash_subkey, const u8 *key, unsigned int key_len) crypto_ablkcipher_clear_flags(ctr_tfm, ~0); ret = crypto_ablkcipher_setkey(ctr_tfm, key, key_len); - if (ret) { - crypto_free_ablkcipher(ctr_tfm); - return ret; - } + if (ret) + goto out; req = ablkcipher_request_alloc(ctr_tfm, GFP_KERNEL); if (!req) { - crypto_free_ablkcipher(ctr_tfm); - return -EINVAL; + ret = -EINVAL; + goto out_free_ablkcipher; } req_data = kmalloc(sizeof(*req_data), GFP_KERNEL); if (!req_data) { - crypto_free_ablkcipher(ctr_tfm); - return -ENOMEM; + ret = -ENOMEM; + goto out_free_request; } memset(req_data->iv, 0, sizeof(req_data->iv)); @@ -913,9 +911,12 @@ rfc4106_set_hash_subkey(u8 *hash_subkey, const u8 *key, unsigned int key_len) if (!ret) ret = req_data->result.err; } +out_free_request: ablkcipher_request_free(req); kfree(req_data); +out_free_ablkcipher: crypto_free_ablkcipher(ctr_tfm); +out: return ret; } -- cgit v1.2.3-18-g5258 From 56f94b1e6eddef55ebc9850ac4e4dfea366401bf Mon Sep 17 00:00:00 2001 From: Daiane Angolini Date: Thu, 9 Dec 2010 15:50:49 -0200 Subject: ARM: mx5/mx51_3ds: Add watchdog support Signed-off-by: Daiane Angolini Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/Kconfig | 1 + arch/arm/mach-mx5/board-mx51_3ds.c | 1 + 2 files changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index af8749b04ff..10b600800fa 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -50,6 +50,7 @@ config MACH_MX51_BABBAGE config MACH_MX51_3DS bool "Support MX51PDK (3DS)" select SOC_IMX51 + select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_KEYPAD select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c index 49d64484237..8a0619b5af9 100644 --- a/arch/arm/mach-mx5/board-mx51_3ds.c +++ b/arch/arm/mach-mx5/board-mx51_3ds.c @@ -173,6 +173,7 @@ static void __init mxc_board_init(void) imx51_add_sdhci_esdhc_imx(0, NULL); mxc_init_keypad(); + imx51_add_imx2_wdt(0, NULL); } static void __init mx51_3ds_timer_init(void) -- cgit v1.2.3-18-g5258 From 13be9f00c33fe69112fe6c755d6a8f3e249abbb2 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 14 Jan 2011 14:30:03 +0100 Subject: ARM i.MX28: fix bit operation reg | (1 << clk->enable_shift) always evaluates to true. Switch it to & which makes much more sense Signed-off-by: Sascha Hauer Acked-by: Shawn Guo --- arch/arm/mach-mxs/clock-mx28.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index 56312c092a9..4146b38605d 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -355,7 +355,7 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ } else { \ reg &= ~BM_CLKCTRL_##dr##_DIV; \ reg |= div << BP_CLKCTRL_##dr##_DIV; \ - if (reg | (1 << clk->enable_shift)) { \ + if (reg & (1 << clk->enable_shift)) { \ pr_err("%s: clock is gated\n", __func__); \ return -EINVAL; \ } \ -- cgit v1.2.3-18-g5258 From 34d80730c30fa37740cb43bb0eec62352df3a7c6 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 14 Jan 2011 15:23:12 +0100 Subject: ARM i.MX28: use correct register for setting the rate _CLK_SET_RATE does not only handle the cpu clock but also other clocks, so do not hardcode the HW_CLKCTRL_CPU register. Signed-off-by: Sascha Hauer Acked-by: Shawn Guo --- arch/arm/mach-mxs/clock-mx28.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index 4146b38605d..44acd9cd177 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -360,7 +360,7 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ return -EINVAL; \ } \ } \ - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU); \ + __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ \ for (i = 10000; i; i--) \ if (!(__raw_readl(CLKCTRL_BASE_ADDR + \ -- cgit v1.2.3-18-g5258 From 5080e9c981473cd3e5d1571ff8d6dc39ba2777b1 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Thu, 20 Jan 2011 16:58:50 +0100 Subject: ARM i.MX23/28: remove secondary field from struct clk. It's unused Signed-off-by: Sascha Hauer Acked-by: Shawn Guo --- arch/arm/mach-mxs/clock.c | 2 -- arch/arm/mach-mxs/include/mach/clock.h | 2 -- 2 files changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mxs/clock.c b/arch/arm/mach-mxs/clock.c index e7d2269cf70..a7093c88e6a 100644 --- a/arch/arm/mach-mxs/clock.c +++ b/arch/arm/mach-mxs/clock.c @@ -57,7 +57,6 @@ static void __clk_disable(struct clk *clk) if (clk->disable) clk->disable(clk); __clk_disable(clk->parent); - __clk_disable(clk->secondary); } } @@ -68,7 +67,6 @@ static int __clk_enable(struct clk *clk) if (clk->usecount++ == 0) { __clk_enable(clk->parent); - __clk_enable(clk->secondary); if (clk->enable) clk->enable(clk); diff --git a/arch/arm/mach-mxs/include/mach/clock.h b/arch/arm/mach-mxs/include/mach/clock.h index 041e276d8a3..592c9ab5d76 100644 --- a/arch/arm/mach-mxs/include/mach/clock.h +++ b/arch/arm/mach-mxs/include/mach/clock.h @@ -29,8 +29,6 @@ struct clk { int id; /* Source clock this clk depends on */ struct clk *parent; - /* Secondary clock to enable/disable with this clock */ - struct clk *secondary; /* Reference count of clock enable/disable */ __s8 usecount; /* Register bit position for clock's enable/disable control. */ -- cgit v1.2.3-18-g5258 From 71b71518c7b97bae7317b452bf7fba067e38030a Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 24 Jan 2011 08:26:33 +0100 Subject: ARM i.MX23: use correct register for setting the rate Signed-off-by: Sascha Hauer Acked-by: Shawn Guo --- arch/arm/mach-mxs/clock-mx23.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c index b1a362ebfde..72069243aec 100644 --- a/arch/arm/mach-mxs/clock-mx23.c +++ b/arch/arm/mach-mxs/clock-mx23.c @@ -304,7 +304,7 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ reg &= ~BM_CLKCTRL_##dr##_DIV; \ reg |= div << BP_CLKCTRL_##dr##_DIV; \ - if (reg | (1 << clk->enable_shift)) { \ + if (reg & (1 << clk->enable_shift)) { \ pr_err("%s: clock is gated\n", __func__); \ return -EINVAL; \ } \ -- cgit v1.2.3-18-g5258 From c6e7695de8cad32be412d9e08a15d368ffe12aa6 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 21 Jan 2011 16:03:57 -0200 Subject: ARM: imx: Add VPR200 and MX51_3DS entries to uncompress.h MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Fabio Estevam Tested-by: Marc Reilly Acked-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/include/mach/uncompress.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h index 3a70ebf0477..ff469c4f1d7 100644 --- a/arch/arm/plat-mxc/include/mach/uncompress.h +++ b/arch/arm/plat-mxc/include/mach/uncompress.h @@ -95,6 +95,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) case MACH_TYPE_MX35_3DS: case MACH_TYPE_PCM043: case MACH_TYPE_LILLY1131: + case MACH_TYPE_VPR200: uart_base = MX3X_UART1_BASE_ADDR; break; case MACH_TYPE_MAGX_ZN5: @@ -102,6 +103,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) break; case MACH_TYPE_MX51_BABBAGE: case MACH_TYPE_EUKREA_CPUIMX51SD: + case MACH_TYPE_MX51_3DS: uart_base = MX51_UART1_BASE_ADDR; break; case MACH_TYPE_MX50_RDP: -- cgit v1.2.3-18-g5258 From 5f804df3cca990bc2f0bd1f126c134af1d2a3ca2 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 22 Jan 2011 16:18:56 -0200 Subject: ARM: mach-imx/mach-mx25_3ds: Fix section type MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Fabio Estevam Acked-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/mach-mx25_3ds.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c index aa76cfd9f34..8382e790207 100644 --- a/arch/arm/mach-imx/mach-mx25_3ds.c +++ b/arch/arm/mach-imx/mach-mx25_3ds.c @@ -180,7 +180,7 @@ static const uint32_t mx25pdk_keymap[] = { KEY(3, 3, KEY_POWER), }; -static const struct matrix_keymap_data mx25pdk_keymap_data __initdata = { +static const struct matrix_keymap_data mx25pdk_keymap_data __initconst = { .keymap = mx25pdk_keymap, .keymap_size = ARRAY_SIZE(mx25pdk_keymap), }; -- cgit v1.2.3-18-g5258 From f512626f5baf09c1d40d098462a986417f4e9790 Mon Sep 17 00:00:00 2001 From: Hans Ulli Kroll Date: Sun, 26 Dec 2010 11:02:29 +0100 Subject: ARM: 6604/1: Gemini: add platform support for Gemini RTC adds rtc support for all Gemini SoC boards nas4220b, rut1xx, wbd111, wbd222 Signed-off-by: Hans Ulli Kroll Signed-off-by: Russell King --- arch/arm/mach-gemini/board-nas4220b.c | 1 + arch/arm/mach-gemini/board-rut1xx.c | 1 + arch/arm/mach-gemini/board-wbd111.c | 1 + arch/arm/mach-gemini/board-wbd222.c | 1 + arch/arm/mach-gemini/common.h | 1 + arch/arm/mach-gemini/devices.c | 26 ++++++++++++++++++++++++++ 6 files changed, 31 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-gemini/board-nas4220b.c b/arch/arm/mach-gemini/board-nas4220b.c index 2ba096de003..0cf7a07c3f3 100644 --- a/arch/arm/mach-gemini/board-nas4220b.c +++ b/arch/arm/mach-gemini/board-nas4220b.c @@ -98,6 +98,7 @@ static void __init ib4220b_init(void) platform_register_pflash(SZ_16M, NULL, 0); platform_device_register(&ib4220b_led_device); platform_device_register(&ib4220b_key_device); + platform_register_rtc(); } MACHINE_START(NAS4220B, "Raidsonic NAS IB-4220-B") diff --git a/arch/arm/mach-gemini/board-rut1xx.c b/arch/arm/mach-gemini/board-rut1xx.c index a9a0d8b0194..4fa09af9949 100644 --- a/arch/arm/mach-gemini/board-rut1xx.c +++ b/arch/arm/mach-gemini/board-rut1xx.c @@ -82,6 +82,7 @@ static void __init rut1xx_init(void) platform_register_pflash(SZ_8M, NULL, 0); platform_device_register(&rut1xx_leds); platform_device_register(&rut1xx_keys_device); + platform_register_rtc(); } MACHINE_START(RUT100, "Teltonika RUT100") diff --git a/arch/arm/mach-gemini/board-wbd111.c b/arch/arm/mach-gemini/board-wbd111.c index 8b88d50d433..af7b68a6b25 100644 --- a/arch/arm/mach-gemini/board-wbd111.c +++ b/arch/arm/mach-gemini/board-wbd111.c @@ -130,6 +130,7 @@ static void __init wbd111_init(void) wbd111_num_partitions); platform_device_register(&wbd111_leds_device); platform_device_register(&wbd111_keys_device); + platform_register_rtc(); } MACHINE_START(WBD111, "Wiliboard WBD-111") diff --git a/arch/arm/mach-gemini/board-wbd222.c b/arch/arm/mach-gemini/board-wbd222.c index 1eebcecd1c3..99e5bbecf92 100644 --- a/arch/arm/mach-gemini/board-wbd222.c +++ b/arch/arm/mach-gemini/board-wbd222.c @@ -130,6 +130,7 @@ static void __init wbd222_init(void) wbd222_num_partitions); platform_device_register(&wbd222_leds_device); platform_device_register(&wbd222_keys_device); + platform_register_rtc(); } MACHINE_START(WBD222, "Wiliboard WBD-222") diff --git a/arch/arm/mach-gemini/common.h b/arch/arm/mach-gemini/common.h index 9392834a214..7670c39acb2 100644 --- a/arch/arm/mach-gemini/common.h +++ b/arch/arm/mach-gemini/common.h @@ -18,6 +18,7 @@ extern void gemini_map_io(void); extern void gemini_init_irq(void); extern void gemini_timer_init(void); extern void gemini_gpio_init(void); +extern void platform_register_rtc(void); /* Common platform devices registration functions */ extern int platform_register_uart(void); diff --git a/arch/arm/mach-gemini/devices.c b/arch/arm/mach-gemini/devices.c index 6b525253d02..5cff29818b7 100644 --- a/arch/arm/mach-gemini/devices.c +++ b/arch/arm/mach-gemini/devices.c @@ -90,3 +90,29 @@ int platform_register_pflash(unsigned int size, struct mtd_partition *parts, return platform_device_register(&pflash_device); } + +static struct resource gemini_rtc_resources[] = { + [0] = { + .start = GEMINI_RTC_BASE, + .end = GEMINI_RTC_BASE + 0x24, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_RTC, + .end = IRQ_RTC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device gemini_rtc_device = { + .name = "rtc-gemini", + .id = 0, + .num_resources = ARRAY_SIZE(gemini_rtc_resources), + .resource = gemini_rtc_resources, +}; + +int __init platform_register_rtc(void) +{ + return platform_device_register(&gemini_rtc_device); +} + -- cgit v1.2.3-18-g5258 From ba5499ebfb7bc7859039d782099c75d92c394016 Mon Sep 17 00:00:00 2001 From: Dima Zavin Date: Mon, 10 Jan 2011 11:00:30 -0800 Subject: ARM: msm: 7x30: don't force a gpiomux table for the whole arch This is completely board specific and therefore must be provided on a per-board basis. Signed-off-by: Dima Zavin Signed-off-by: David Brown --- arch/arm/mach-msm/Makefile | 2 +- arch/arm/mach-msm/board-msm7x30.c | 22 ++++++++++++++++++++++ arch/arm/mach-msm/gpiomux-7x30.c | 38 -------------------------------------- 3 files changed, 23 insertions(+), 39 deletions(-) delete mode 100644 arch/arm/mach-msm/gpiomux-7x30.c (limited to 'arch') diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index 94195c190e1..f4601256f35 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -30,7 +30,7 @@ obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o obj-$(CONFIG_ARCH_MSM8X60) += board-msm8x60.o -obj-$(CONFIG_ARCH_MSM7X30) += gpiomux-7x30.o gpiomux-v1.o gpiomux.o +obj-$(CONFIG_ARCH_MSM7X30) += gpiomux-v1.o gpiomux.o obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o gpiomux-v1.o gpiomux.o obj-$(CONFIG_ARCH_MSM8X60) += gpiomux-8x60.o gpiomux-v2.o gpiomux.o ifdef CONFIG_MSM_V2_TLMM diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c index 6f3b9735e97..0707cc041f2 100644 --- a/arch/arm/mach-msm/board-msm7x30.c +++ b/arch/arm/mach-msm/board-msm7x30.c @@ -36,6 +36,7 @@ #include #include "devices.h" +#include "gpiomux.h" #include "proc_comm.h" extern struct sys_timer msm_timer; @@ -52,6 +53,27 @@ static struct msm_otg_platform_data msm_otg_pdata = { .otg_control = OTG_PHY_CONTROL, }; +struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = { +#ifdef CONFIG_SERIAL_MSM_CONSOLE + [49] = { /* UART2 RFR */ + .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | + GPIOMUX_FUNC_2 | GPIOMUX_VALID, + }, + [50] = { /* UART2 CTS */ + .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | + GPIOMUX_FUNC_2 | GPIOMUX_VALID, + }, + [51] = { /* UART2 RX */ + .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | + GPIOMUX_FUNC_2 | GPIOMUX_VALID, + }, + [52] = { /* UART2 TX */ + .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | + GPIOMUX_FUNC_2 | GPIOMUX_VALID, + }, +#endif +}; + static struct platform_device *devices[] __initdata = { #if defined(CONFIG_SERIAL_MSM) || defined(CONFIG_MSM_SERIAL_DEBUGGER) &msm_device_uart2, diff --git a/arch/arm/mach-msm/gpiomux-7x30.c b/arch/arm/mach-msm/gpiomux-7x30.c deleted file mode 100644 index 6ce41c5241a..00000000000 --- a/arch/arm/mach-msm/gpiomux-7x30.c +++ /dev/null @@ -1,38 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ -#include "gpiomux.h" - -struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = { -#ifdef CONFIG_SERIAL_MSM_CONSOLE - [49] = { /* UART2 RFR */ - .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | - GPIOMUX_FUNC_2 | GPIOMUX_VALID, - }, - [50] = { /* UART2 CTS */ - .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | - GPIOMUX_FUNC_2 | GPIOMUX_VALID, - }, - [51] = { /* UART2 RX */ - .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | - GPIOMUX_FUNC_2 | GPIOMUX_VALID, - }, - [52] = { /* UART2 TX */ - .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | - GPIOMUX_FUNC_2 | GPIOMUX_VALID, - }, -#endif -}; -- cgit v1.2.3-18-g5258 From 82e6923e1862428b755ec306b3dbccf926849314 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 21 Jan 2011 11:04:45 +0000 Subject: ARM: lh7a40x: remove unmaintained platform support lh7a40x has only been receiving updates for updates to generic code. The last involvement from the maintainer according to the git logs was in 2006. As such, it is a maintainence burden with no benefit. This gets rid of two defconfigs. Signed-off-by: Russell King --- arch/arm/Kconfig | 13 - arch/arm/Makefile | 1 - arch/arm/configs/lpd7a400_defconfig | 68 ---- arch/arm/configs/lpd7a404_defconfig | 81 ----- arch/arm/include/asm/setup.h | 6 +- arch/arm/mach-lh7a40x/Kconfig | 74 ---- arch/arm/mach-lh7a40x/Makefile | 17 - arch/arm/mach-lh7a40x/Makefile.boot | 4 - arch/arm/mach-lh7a40x/arch-kev7a400.c | 118 ------- arch/arm/mach-lh7a40x/arch-lpd7a40x.c | 422 ----------------------- arch/arm/mach-lh7a40x/clcd.c | 241 ------------- arch/arm/mach-lh7a40x/clocks.c | 108 ------ arch/arm/mach-lh7a40x/common.h | 17 - arch/arm/mach-lh7a40x/include/mach/clocks.h | 18 - arch/arm/mach-lh7a40x/include/mach/constants.h | 91 ----- arch/arm/mach-lh7a40x/include/mach/debug-macro.S | 37 -- arch/arm/mach-lh7a40x/include/mach/dma.h | 86 ----- arch/arm/mach-lh7a40x/include/mach/entry-macro.S | 149 -------- arch/arm/mach-lh7a40x/include/mach/hardware.h | 62 ---- arch/arm/mach-lh7a40x/include/mach/io.h | 20 -- arch/arm/mach-lh7a40x/include/mach/irqs.h | 200 ----------- arch/arm/mach-lh7a40x/include/mach/memory.h | 28 -- arch/arm/mach-lh7a40x/include/mach/registers.h | 224 ------------ arch/arm/mach-lh7a40x/include/mach/ssp.h | 70 ---- arch/arm/mach-lh7a40x/include/mach/system.h | 19 - arch/arm/mach-lh7a40x/include/mach/timex.h | 17 - arch/arm/mach-lh7a40x/include/mach/uncompress.h | 38 -- arch/arm/mach-lh7a40x/include/mach/vmalloc.h | 10 - arch/arm/mach-lh7a40x/irq-kev7a400.c | 93 ----- arch/arm/mach-lh7a40x/irq-lh7a400.c | 91 ----- arch/arm/mach-lh7a40x/irq-lh7a404.c | 175 ---------- arch/arm/mach-lh7a40x/irq-lpd7a40x.c | 128 ------- arch/arm/mach-lh7a40x/lcd-panel.h | 345 ------------------ arch/arm/mach-lh7a40x/ssp-cpld.c | 343 ------------------ arch/arm/mach-lh7a40x/time.c | 71 ---- 35 files changed, 1 insertion(+), 3484 deletions(-) delete mode 100644 arch/arm/configs/lpd7a400_defconfig delete mode 100644 arch/arm/configs/lpd7a404_defconfig delete mode 100644 arch/arm/mach-lh7a40x/Kconfig delete mode 100644 arch/arm/mach-lh7a40x/Makefile delete mode 100644 arch/arm/mach-lh7a40x/Makefile.boot delete mode 100644 arch/arm/mach-lh7a40x/arch-kev7a400.c delete mode 100644 arch/arm/mach-lh7a40x/arch-lpd7a40x.c delete mode 100644 arch/arm/mach-lh7a40x/clcd.c delete mode 100644 arch/arm/mach-lh7a40x/clocks.c delete mode 100644 arch/arm/mach-lh7a40x/common.h delete mode 100644 arch/arm/mach-lh7a40x/include/mach/clocks.h delete mode 100644 arch/arm/mach-lh7a40x/include/mach/constants.h delete mode 100644 arch/arm/mach-lh7a40x/include/mach/debug-macro.S delete mode 100644 arch/arm/mach-lh7a40x/include/mach/dma.h delete mode 100644 arch/arm/mach-lh7a40x/include/mach/entry-macro.S delete mode 100644 arch/arm/mach-lh7a40x/include/mach/hardware.h delete mode 100644 arch/arm/mach-lh7a40x/include/mach/io.h delete mode 100644 arch/arm/mach-lh7a40x/include/mach/irqs.h delete mode 100644 arch/arm/mach-lh7a40x/include/mach/memory.h delete mode 100644 arch/arm/mach-lh7a40x/include/mach/registers.h delete mode 100644 arch/arm/mach-lh7a40x/include/mach/ssp.h delete mode 100644 arch/arm/mach-lh7a40x/include/mach/system.h delete mode 100644 arch/arm/mach-lh7a40x/include/mach/timex.h delete mode 100644 arch/arm/mach-lh7a40x/include/mach/uncompress.h delete mode 100644 arch/arm/mach-lh7a40x/include/mach/vmalloc.h delete mode 100644 arch/arm/mach-lh7a40x/irq-kev7a400.c delete mode 100644 arch/arm/mach-lh7a40x/irq-lh7a400.c delete mode 100644 arch/arm/mach-lh7a40x/irq-lh7a404.c delete mode 100644 arch/arm/mach-lh7a40x/irq-lpd7a40x.c delete mode 100644 arch/arm/mach-lh7a40x/lcd-panel.h delete mode 100644 arch/arm/mach-lh7a40x/ssp-cpld.c delete mode 100644 arch/arm/mach-lh7a40x/time.c (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5cff165b7eb..18a1eb93fd7 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -795,17 +795,6 @@ config ARCH_TCC_926 help Support for Telechips TCC ARM926-based systems. -config ARCH_LH7A40X - bool "Sharp LH7A40X" - select CPU_ARM922T - select ARCH_SPARSEMEM_ENABLE if !LH7A40X_CONTIGMEM - select ARCH_USES_GETTIMEOFFSET - help - Say Y here for systems based on one of the Sharp LH7A40X - System on a Chip processors. These CPUs include an ARM922T - core with a wide array of integrated devices for - hand-held and low-power applications. - config ARCH_U300 bool "ST-Ericsson U300 Series" depends on MMU @@ -922,8 +911,6 @@ source "arch/arm/mach-kirkwood/Kconfig" source "arch/arm/mach-ks8695/Kconfig" -source "arch/arm/mach-lh7a40x/Kconfig" - source "arch/arm/mach-loki/Kconfig" source "arch/arm/mach-lpc32xx/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index c22c1adfedd..aa18cb9da57 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -146,7 +146,6 @@ machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx machine-$(CONFIG_ARCH_KIRKWOOD) := kirkwood machine-$(CONFIG_ARCH_KS8695) := ks8695 -machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x machine-$(CONFIG_ARCH_LOKI) := loki machine-$(CONFIG_ARCH_LPC32XX) := lpc32xx machine-$(CONFIG_ARCH_MMP) := mmp diff --git a/arch/arm/configs/lpd7a400_defconfig b/arch/arm/configs/lpd7a400_defconfig deleted file mode 100644 index 5a48f171204..00000000000 --- a/arch/arm/configs/lpd7a400_defconfig +++ /dev/null @@ -1,68 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EXPERT=y -# CONFIG_HOTPLUG is not set -# CONFIG_EPOLL is not set -# CONFIG_IOSCHED_DEADLINE is not set -CONFIG_ARCH_LH7A40X=y -CONFIG_MACH_LPD7A400=y -CONFIG_PREEMPT=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_IDE=y -CONFIG_SCSI=y -# CONFIG_SCSI_PROC_FS is not set -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_SMC91X=y -# CONFIG_INPUT_MOUSEDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -# CONFIG_SERIO is not set -CONFIG_SERIAL_LH7A40X=y -CONFIG_SERIAL_LH7A40X_CONSOLE=y -CONFIG_FB=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y diff --git a/arch/arm/configs/lpd7a404_defconfig b/arch/arm/configs/lpd7a404_defconfig deleted file mode 100644 index 22d0631de00..00000000000 --- a/arch/arm/configs/lpd7a404_defconfig +++ /dev/null @@ -1,81 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_LOG_BUF_SHIFT=16 -CONFIG_EXPERT=y -# CONFIG_HOTPLUG is not set -# CONFIG_EPOLL is not set -CONFIG_SLAB=y -# CONFIG_IOSCHED_DEADLINE is not set -CONFIG_ARCH_LH7A40X=y -CONFIG_MACH_LPD7A404=y -CONFIG_PREEMPT=y -CONFIG_DISCONTIGMEM_MANUAL=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_IDE=y -CONFIG_SCSI=y -# CONFIG_SCSI_PROC_FS is not set -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_SMC91X=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -# CONFIG_SERIO is not set -CONFIG_SERIAL_LH7A40X=y -CONFIG_SERIAL_LH7A40X_CONSOLE=y -CONFIG_FB=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_STORAGE_DEBUG=y -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_GADGET=y -CONFIG_USB_ZERO=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -CONFIG_INOTIFY=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_MUTEXES=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index f1e5a9bca24..da8b52ec49c 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -192,11 +192,7 @@ static struct tagtable __tagtable_##fn __tag = { tag, fn } /* * Memory map description */ -#ifdef CONFIG_ARCH_LH7A40X -# define NR_BANKS 16 -#else -# define NR_BANKS 8 -#endif +#define NR_BANKS 8 struct membank { unsigned long start; diff --git a/arch/arm/mach-lh7a40x/Kconfig b/arch/arm/mach-lh7a40x/Kconfig deleted file mode 100644 index 9be7466e346..00000000000 --- a/arch/arm/mach-lh7a40x/Kconfig +++ /dev/null @@ -1,74 +0,0 @@ -if ARCH_LH7A40X - -menu "LH7A40X Implementations" - -config MACH_KEV7A400 - bool "KEV7A400" - select ARCH_LH7A400 - help - Say Y here if you are using the Sharp KEV7A400 development - board. This hardware is discontinued, so I'd be very - surprised if you wanted this option. - -config MACH_LPD7A400 - bool "LPD7A400 Card Engine" - select ARCH_LH7A400 -# select IDE_POLL -# select HAS_TOUCHSCREEN_ADS7843_LH7 - help - Say Y here if you are using Logic Product Development's - LPD7A400 CardEngine. For the time being, the LPD7A400 and - LPD7A404 options are mutually exclusive. - -config MACH_LPD7A404 - bool "LPD7A404 Card Engine" - select ARCH_LH7A404 -# select IDE_POLL -# select HAS_TOUCHSCREEN_ADC_LH7 - help - Say Y here if you are using Logic Product Development's - LPD7A404 CardEngine. For the time being, the LPD7A400 and - LPD7A404 options are mutually exclusive. - -config ARCH_LH7A400 - bool - -config ARCH_LH7A404 - bool - -config LPD7A40X_CPLD_SSP - bool - -config LH7A40X_CONTIGMEM - bool "Disable NUMA/SparseMEM Support" - help - Say Y here if your bootloader sets the SROMLL bit(s) in - the SDRAM controller, organizing memory as a contiguous - array. This option will disable sparse memory support - and force the kernel to manage all memory in one node. - - Setting this option incorrectly may prevent the kernel - from booting. It is OK to leave it N. - - For more information, consult - . - -config LH7A40X_ONE_BANK_PER_NODE - bool "Optimize NUMA Node Tables for Size" - depends on !LH7A40X_CONTIGMEM - help - Say Y here to produce compact memory node tables. By - default pairs of adjacent physical RAM banks are managed - together in a single node, incurring some wasted overhead - in the node tables, however also maintaining compatibility - with systems where physical memory is truly contiguous. - - Setting this option incorrectly may prevent the kernel from - booting. It is OK to leave it N. - - For more information, consult - . - -endmenu - -endif diff --git a/arch/arm/mach-lh7a40x/Makefile b/arch/arm/mach-lh7a40x/Makefile deleted file mode 100644 index 94b8615fb3c..00000000000 --- a/arch/arm/mach-lh7a40x/Makefile +++ /dev/null @@ -1,17 +0,0 @@ -# -# Makefile for the linux kernel. -# - -# Object file lists. - -obj-y := time.o clocks.o -obj-m := -obj-n := -obj- := - -obj-$(CONFIG_MACH_KEV7A400) += arch-kev7a400.o irq-lh7a400.o -obj-$(CONFIG_MACH_LPD7A400) += arch-lpd7a40x.o irq-lh7a400.o -obj-$(CONFIG_MACH_LPD7A404) += arch-lpd7a40x.o irq-lh7a404.o -obj-$(CONFIG_LPD7A40X_CPLD_SSP) += ssp-cpld.o -obj-$(CONFIG_FB_ARMCLCD) += clcd.o - diff --git a/arch/arm/mach-lh7a40x/Makefile.boot b/arch/arm/mach-lh7a40x/Makefile.boot deleted file mode 100644 index af941be076e..00000000000 --- a/arch/arm/mach-lh7a40x/Makefile.boot +++ /dev/null @@ -1,4 +0,0 @@ - zreladdr-y := 0xc0008000 -params_phys-y := 0xc0000100 -initrd_phys-y := 0xc4000000 - diff --git a/arch/arm/mach-lh7a40x/arch-kev7a400.c b/arch/arm/mach-lh7a40x/arch-kev7a400.c deleted file mode 100644 index 71129c33c7d..00000000000 --- a/arch/arm/mach-lh7a40x/arch-kev7a400.c +++ /dev/null @@ -1,118 +0,0 @@ -/* arch/arm/mach-lh7a40x/arch-kev7a400.c - * - * Copyright (C) 2004 Logic Product Development - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -#include "common.h" - - /* This function calls the board specific IRQ initialization function. */ - -static struct map_desc kev7a400_io_desc[] __initdata = { - { - .virtual = IO_VIRT, - .pfn = __phys_to_pfn(IO_PHYS), - .length = IO_SIZE, - .type = MT_DEVICE - }, { - .virtual = CPLD_VIRT, - .pfn = __phys_to_pfn(CPLD_PHYS), - .length = CPLD_SIZE, - .type = MT_DEVICE - } -}; - -void __init kev7a400_map_io(void) -{ - iotable_init (kev7a400_io_desc, ARRAY_SIZE (kev7a400_io_desc)); -} - -static u16 CPLD_IRQ_mask; /* Mask for CPLD IRQs, 1 == unmasked */ - -static void kev7a400_ack_cpld_irq(struct irq_data *d) -{ - CPLD_CL_INT = 1 << (d->irq - IRQ_KEV7A400_CPLD); -} - -static void kev7a400_mask_cpld_irq(struct irq_data *d) -{ - CPLD_IRQ_mask &= ~(1 << (d->irq - IRQ_KEV7A400_CPLD)); - CPLD_WR_PB_INT_MASK = CPLD_IRQ_mask; -} - -static void kev7a400_unmask_cpld_irq(struct irq_data *d) -{ - CPLD_IRQ_mask |= 1 << (d->irq - IRQ_KEV7A400_CPLD); - CPLD_WR_PB_INT_MASK = CPLD_IRQ_mask; -} - -static struct irq_chip kev7a400_cpld_chip = { - .name = "CPLD", - .irq_ack = kev7a400_ack_cpld_irq, - .irq_mask = kev7a400_mask_cpld_irq, - .irq_unmask = kev7a400_unmask_cpld_irq, -}; - - -static void kev7a400_cpld_handler (unsigned int irq, struct irq_desc *desc) -{ - u32 mask = CPLD_LATCHED_INTS; - irq = IRQ_KEV7A400_CPLD; - for (; mask; mask >>= 1, ++irq) - if (mask & 1) - generic_handle_irq(irq); -} - -void __init lh7a40x_init_board_irq (void) -{ - int irq; - - for (irq = IRQ_KEV7A400_CPLD; - irq < IRQ_KEV7A400_CPLD + NR_IRQ_BOARD; ++irq) { - set_irq_chip (irq, &kev7a400_cpld_chip); - set_irq_handler (irq, handle_edge_irq); - set_irq_flags (irq, IRQF_VALID); - } - set_irq_chained_handler (IRQ_CPLD, kev7a400_cpld_handler); - - /* Clear all CPLD interrupts */ - CPLD_CL_INT = 0xff; /* CPLD_INTR_MMC_CD | CPLD_INTR_ETH_INT; */ - - GPIO_GPIOINTEN = 0; /* Disable all GPIO interrupts */ - barrier(); - -#if 0 - GPIO_INTTYPE1 - = (GPIO_INTR_PCC1_CD | GPIO_INTR_PCC1_CD); /* Edge trig. */ - GPIO_INTTYPE2 = 0; /* Falling edge & low-level */ - GPIO_GPIOFEOI = 0xff; /* Clear all GPIO interrupts */ - GPIO_GPIOINTEN = 0xff; /* Enable all GPIO interrupts */ - - init_FIQ(); -#endif -} - -MACHINE_START (KEV7A400, "Sharp KEV7a400") - /* Maintainer: Marc Singer */ - .boot_params = 0xc0000100, - .map_io = kev7a400_map_io, - .init_irq = lh7a400_init_irq, - .timer = &lh7a40x_timer, -MACHINE_END diff --git a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c deleted file mode 100644 index e735546181a..00000000000 --- a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c +++ /dev/null @@ -1,422 +0,0 @@ -/* arch/arm/mach-lh7a40x/arch-lpd7a40x.c - * - * Copyright (C) 2004 Logic Product Development - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -#include "common.h" - -#define CPLD_INT_NETHERNET (1<<0) -#define CPLD_INTMASK_ETHERNET (1<<2) -#if defined (CONFIG_MACH_LPD7A400) -# define CPLD_INT_NTOUCH (1<<1) -# define CPLD_INTMASK_TOUCH (1<<3) -# define CPLD_INT_PEN (1<<4) -# define CPLD_INTMASK_PEN (1<<4) -# define CPLD_INT_PIRQ (1<<4) -#endif -#define CPLD_INTMASK_CPLD (1<<7) -#define CPLD_INT_CPLD (1<<6) - -#define CPLD_CONTROL_SWINT (1<<7) /* Disable all CPLD IRQs */ -#define CPLD_CONTROL_OCMSK (1<<6) /* Mask USB1 connect IRQ */ -#define CPLD_CONTROL_PDRV (1<<5) /* PCC_nDRV high */ -#define CPLD_CONTROL_USB1C (1<<4) /* USB1 connect IRQ active */ -#define CPLD_CONTROL_USB1P (1<<3) /* USB1 power disable */ -#define CPLD_CONTROL_AWKP (1<<2) /* Auto-wakeup disabled */ -#define CPLD_CONTROL_LCD_ENABLE (1<<1) /* LCD Vee enable */ -#define CPLD_CONTROL_WRLAN_NENABLE (1<<0) /* SMC91x power disable */ - - -static struct resource smc91x_resources[] = { - [0] = { - .start = CPLD00_PHYS, - .end = CPLD00_PHYS + CPLD00_SIZE - 1, /* Only needs 16B */ - .flags = IORESOURCE_MEM, - }, - - [1] = { - .start = IRQ_LPD7A40X_ETH_INT, - .end = IRQ_LPD7A40X_ETH_INT, - .flags = IORESOURCE_IRQ, - }, - -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; - -static struct resource lh7a40x_usbclient_resources[] = { - [0] = { - .start = USB_PHYS, - .end = (USB_PHYS + PAGE_SIZE), - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_USB, - .end = IRQ_USB, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 lh7a40x_usbclient_dma_mask = 0xffffffffUL; - -static struct platform_device lh7a40x_usbclient_device = { -// .name = "lh7a40x_udc", - .name = "lh7-udc", - .id = 0, - .dev = { - .dma_mask = &lh7a40x_usbclient_dma_mask, - .coherent_dma_mask = 0xffffffffUL, - }, - .num_resources = ARRAY_SIZE (lh7a40x_usbclient_resources), - .resource = lh7a40x_usbclient_resources, -}; - -#if defined (CONFIG_ARCH_LH7A404) - -static struct resource lh7a404_usbhost_resources [] = { - [0] = { - .start = USBH_PHYS, - .end = (USBH_PHYS + 0xFF), - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_USHINTR, - .end = IRQ_USHINTR, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 lh7a404_usbhost_dma_mask = 0xffffffffUL; - -static struct platform_device lh7a404_usbhost_device = { - .name = "lh7a404-ohci", - .id = 0, - .dev = { - .dma_mask = &lh7a404_usbhost_dma_mask, - .coherent_dma_mask = 0xffffffffUL, - }, - .num_resources = ARRAY_SIZE (lh7a404_usbhost_resources), - .resource = lh7a404_usbhost_resources, -}; - -#endif - -static struct platform_device* lpd7a40x_devs[] __initdata = { - &smc91x_device, - &lh7a40x_usbclient_device, -#if defined (CONFIG_ARCH_LH7A404) - &lh7a404_usbhost_device, -#endif -}; - -extern void lpd7a400_map_io (void); - -static void __init lpd7a40x_init (void) -{ -#if defined (CONFIG_MACH_LPD7A400) - CPLD_CONTROL |= 0 - | CPLD_CONTROL_SWINT /* Disable software interrupt */ - | CPLD_CONTROL_OCMSK; /* Mask USB1 connection IRQ */ - CPLD_CONTROL &= ~(0 - | CPLD_CONTROL_LCD_ENABLE /* Disable LCD */ - | CPLD_CONTROL_WRLAN_NENABLE /* Enable SMC91x */ - ); -#endif - -#if defined (CONFIG_MACH_LPD7A404) - CPLD_CONTROL &= ~(0 - | CPLD_CONTROL_WRLAN_NENABLE /* Enable SMC91x */ - ); -#endif - - platform_add_devices (lpd7a40x_devs, ARRAY_SIZE (lpd7a40x_devs)); -#if defined (CONFIG_FB_ARMCLCD) - lh7a40x_clcd_init (); -#endif -} - -static void lh7a40x_ack_cpld_irq(struct irq_data *d) -{ - /* CPLD doesn't have ack capability, but some devices may */ - -#if defined (CPLD_INTMASK_TOUCH) - /* The touch control *must* mask the interrupt because the - * interrupt bit is read by the driver to determine if the pen - * is still down. */ - if (d->irq == IRQ_TOUCH) - CPLD_INTERRUPTS |= CPLD_INTMASK_TOUCH; -#endif -} - -static void lh7a40x_mask_cpld_irq(struct irq_data *d) -{ - switch (d->irq) { - case IRQ_LPD7A40X_ETH_INT: - CPLD_INTERRUPTS |= CPLD_INTMASK_ETHERNET; - break; -#if defined (IRQ_TOUCH) - case IRQ_TOUCH: - CPLD_INTERRUPTS |= CPLD_INTMASK_TOUCH; - break; -#endif - } -} - -static void lh7a40x_unmask_cpld_irq(struct irq_data *d) -{ - switch (d->irq) { - case IRQ_LPD7A40X_ETH_INT: - CPLD_INTERRUPTS &= ~CPLD_INTMASK_ETHERNET; - break; -#if defined (IRQ_TOUCH) - case IRQ_TOUCH: - CPLD_INTERRUPTS &= ~CPLD_INTMASK_TOUCH; - break; -#endif - } -} - -static struct irq_chip lpd7a40x_cpld_chip = { - .name = "CPLD", - .irq_ack = lh7a40x_ack_cpld_irq, - .irq_mask = lh7a40x_mask_cpld_irq, - .irq_unmask = lh7a40x_unmask_cpld_irq, -}; - -static void lpd7a40x_cpld_handler (unsigned int irq, struct irq_desc *desc) -{ - unsigned int mask = CPLD_INTERRUPTS; - - desc->irq_data.chip->irq_ack(&desc->irq_data); - - if ((mask & (1<<0)) == 0) /* WLAN */ - generic_handle_irq(IRQ_LPD7A40X_ETH_INT); - -#if defined (IRQ_TOUCH) - if ((mask & (1<<1)) == 0) /* Touch */ - generic_handle_irq(IRQ_TOUCH); -#endif - - /* Level-triggered need this */ - desc->irq_data.chip->irq_unmask(&desc->irq_data); -} - - -void __init lh7a40x_init_board_irq (void) -{ - int irq; - - /* Rev A (v2.8): PF0, PF1, PF2, and PF3 are available IRQs. - PF7 supports the CPLD. - Rev B (v3.4): PF0, PF1, and PF2 are available IRQs. - PF3 supports the CPLD. - (Some) LPD7A404 prerelease boards report a version - number of 0x16, but we force an override since the - hardware is of the newer variety. - */ - - unsigned char cpld_version = CPLD_REVISION; - int pinCPLD = (cpld_version == 0x28) ? 7 : 3; - -#if defined CONFIG_MACH_LPD7A404 - cpld_version = 0x34; /* Coerce LPD7A404 to RevB */ -#endif - - /* First, configure user controlled GPIOF interrupts */ - - GPIO_PFDD &= ~0x0f; /* PF0-3 are inputs */ - GPIO_INTTYPE1 &= ~0x0f; /* PF0-3 are level triggered */ - GPIO_INTTYPE2 &= ~0x0f; /* PF0-3 are active low */ - barrier (); - GPIO_GPIOFINTEN |= 0x0f; /* Enable PF0, PF1, PF2, and PF3 IRQs */ - - /* Then, configure CPLD interrupt */ - - /* Disable all CPLD interrupts */ -#if defined (CONFIG_MACH_LPD7A400) - CPLD_INTERRUPTS = CPLD_INTMASK_TOUCH | CPLD_INTMASK_PEN - | CPLD_INTMASK_ETHERNET; - /* *** FIXME: don't know why we need 7 and 4. 7 is way wrong - and 4 is uncefined. */ - // (1<<7)|(1<<4)|(1<<3)|(1<<2); -#endif -#if defined (CONFIG_MACH_LPD7A404) - CPLD_INTERRUPTS = CPLD_INTMASK_ETHERNET; - /* *** FIXME: don't know why we need 6 and 5, neither is defined. */ - // (1<<6)|(1<<5)|(1<<3); -#endif - GPIO_PFDD &= ~(1 << pinCPLD); /* Make input */ - GPIO_INTTYPE1 &= ~(1 << pinCPLD); /* Level triggered */ - GPIO_INTTYPE2 &= ~(1 << pinCPLD); /* Active low */ - barrier (); - GPIO_GPIOFINTEN |= (1 << pinCPLD); /* Enable */ - - /* Cascade CPLD interrupts */ - - for (irq = IRQ_BOARD_START; - irq < IRQ_BOARD_START + NR_IRQ_BOARD; ++irq) { - set_irq_chip (irq, &lpd7a40x_cpld_chip); - set_irq_handler (irq, handle_level_irq); - set_irq_flags (irq, IRQF_VALID); - } - - set_irq_chained_handler ((cpld_version == 0x28) - ? IRQ_CPLD_V28 - : IRQ_CPLD_V34, - lpd7a40x_cpld_handler); -} - -static struct map_desc lpd7a40x_io_desc[] __initdata = { - { - .virtual = IO_VIRT, - .pfn = __phys_to_pfn(IO_PHYS), - .length = IO_SIZE, - .type = MT_DEVICE - }, - { /* Mapping added to work around chip select problems */ - .virtual = IOBARRIER_VIRT, - .pfn = __phys_to_pfn(IOBARRIER_PHYS), - .length = IOBARRIER_SIZE, - .type = MT_DEVICE - }, - { - .virtual = CF_VIRT, - .pfn = __phys_to_pfn(CF_PHYS), - .length = CF_SIZE, - .type = MT_DEVICE - }, - { - .virtual = CPLD02_VIRT, - .pfn = __phys_to_pfn(CPLD02_PHYS), - .length = CPLD02_SIZE, - .type = MT_DEVICE - }, - { - .virtual = CPLD06_VIRT, - .pfn = __phys_to_pfn(CPLD06_PHYS), - .length = CPLD06_SIZE, - .type = MT_DEVICE - }, - { - .virtual = CPLD08_VIRT, - .pfn = __phys_to_pfn(CPLD08_PHYS), - .length = CPLD08_SIZE, - .type = MT_DEVICE - }, - { - .virtual = CPLD08_VIRT, - .pfn = __phys_to_pfn(CPLD08_PHYS), - .length = CPLD08_SIZE, - .type = MT_DEVICE - }, - { - .virtual = CPLD0A_VIRT, - .pfn = __phys_to_pfn(CPLD0A_PHYS), - .length = CPLD0A_SIZE, - .type = MT_DEVICE - }, - { - .virtual = CPLD0C_VIRT, - .pfn = __phys_to_pfn(CPLD0C_PHYS), - .length = CPLD0C_SIZE, - .type = MT_DEVICE - }, - { - .virtual = CPLD0E_VIRT, - .pfn = __phys_to_pfn(CPLD0E_PHYS), - .length = CPLD0E_SIZE, - .type = MT_DEVICE - }, - { - .virtual = CPLD10_VIRT, - .pfn = __phys_to_pfn(CPLD10_PHYS), - .length = CPLD10_SIZE, - .type = MT_DEVICE - }, - { - .virtual = CPLD12_VIRT, - .pfn = __phys_to_pfn(CPLD12_PHYS), - .length = CPLD12_SIZE, - .type = MT_DEVICE - }, - { - .virtual = CPLD14_VIRT, - .pfn = __phys_to_pfn(CPLD14_PHYS), - .length = CPLD14_SIZE, - .type = MT_DEVICE - }, - { - .virtual = CPLD16_VIRT, - .pfn = __phys_to_pfn(CPLD16_PHYS), - .length = CPLD16_SIZE, - .type = MT_DEVICE - }, - { - .virtual = CPLD18_VIRT, - .pfn = __phys_to_pfn(CPLD18_PHYS), - .length = CPLD18_SIZE, - .type = MT_DEVICE - }, - { - .virtual = CPLD1A_VIRT, - .pfn = __phys_to_pfn(CPLD1A_PHYS), - .length = CPLD1A_SIZE, - .type = MT_DEVICE - }, -}; - -void __init -lpd7a40x_map_io(void) -{ - iotable_init (lpd7a40x_io_desc, ARRAY_SIZE (lpd7a40x_io_desc)); -} - -#ifdef CONFIG_MACH_LPD7A400 - -MACHINE_START (LPD7A400, "Logic Product Development LPD7A400-10") - /* Maintainer: Marc Singer */ - .boot_params = 0xc0000100, - .map_io = lpd7a40x_map_io, - .init_irq = lh7a400_init_irq, - .timer = &lh7a40x_timer, - .init_machine = lpd7a40x_init, -MACHINE_END - -#endif - -#ifdef CONFIG_MACH_LPD7A404 - -MACHINE_START (LPD7A404, "Logic Product Development LPD7A404-10") - /* Maintainer: Marc Singer */ - .boot_params = 0xc0000100, - .map_io = lpd7a40x_map_io, - .init_irq = lh7a404_init_irq, - .timer = &lh7a40x_timer, - .init_machine = lpd7a40x_init, -MACHINE_END - -#endif diff --git a/arch/arm/mach-lh7a40x/clcd.c b/arch/arm/mach-lh7a40x/clcd.c deleted file mode 100644 index 7fe4fd347c8..00000000000 --- a/arch/arm/mach-lh7a40x/clcd.c +++ /dev/null @@ -1,241 +0,0 @@ -/* - * arch/arm/mach-lh7a40x/clcd.c - * - * Copyright (C) 2004 Marc Singer - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -#include -#include -#include -#include -#include -#include - -//#include -//#include - -//#include -#include -#include - -#include -#include -#include -#include - -#define HRTFTC_HRSETUP __REG(HRTFTC_PHYS + 0x00) -#define HRTFTC_HRCON __REG(HRTFTC_PHYS + 0x04) -#define HRTFTC_HRTIMING1 __REG(HRTFTC_PHYS + 0x08) -#define HRTFTC_HRTIMING2 __REG(HRTFTC_PHYS + 0x0c) - -#define ALI_SETUP __REG(ALI_PHYS + 0x00) -#define ALI_CONTROL __REG(ALI_PHYS + 0x04) -#define ALI_TIMING1 __REG(ALI_PHYS + 0x08) -#define ALI_TIMING2 __REG(ALI_PHYS + 0x0c) - -#include "lcd-panel.h" - -static void lh7a40x_clcd_disable (struct clcd_fb *fb) -{ -#if defined (CONFIG_MACH_LPD7A400) - CPLD_CONTROL &= ~(1<<1); /* Disable LCD Vee */ -#endif - -#if defined (CONFIG_MACH_LPD7A404) - GPIO_PCD &= ~(1<<3); /* Disable LCD Vee */ -#endif - -#if defined (CONFIG_ARCH_LH7A400) - HRTFTC_HRSETUP &= ~(1<<13); /* Disable HRTFT controller */ -#endif - -#if defined (CONFIG_ARCH_LH7A404) - ALI_SETUP &= ~(1<<13); /* Disable ALI */ -#endif -} - -static void lh7a40x_clcd_enable (struct clcd_fb *fb) -{ - struct clcd_panel_extra* extra - = (struct clcd_panel_extra*) fb->board_data; - -#if defined (CONFIG_MACH_LPD7A400) - CPLD_CONTROL |= (1<<1); /* Enable LCD Vee */ -#endif - -#if defined (CONFIG_MACH_LPD7A404) - GPIO_PCDD &= ~(1<<3); /* Enable LCD Vee */ - GPIO_PCD |= (1<<3); -#endif - -#if defined (CONFIG_ARCH_LH7A400) - - if (extra) { - HRTFTC_HRSETUP - = (1 << 13) - | ((fb->fb.var.xres - 1) << 4) - | 0xc - | (extra->hrmode ? 1 : 0); - HRTFTC_HRCON - = ((extra->clsen ? 1 : 0) << 1) - | ((extra->spsen ? 1 : 0) << 0); - HRTFTC_HRTIMING1 - = (extra->pcdel << 8) - | (extra->revdel << 4) - | (extra->lpdel << 0); - HRTFTC_HRTIMING2 - = (extra->spldel << 9) - | (extra->pc2del << 0); - } - else - HRTFTC_HRSETUP - = (1 << 13) - | 0xc; -#endif - -#if defined (CONFIG_ARCH_LH7A404) - - if (extra) { - ALI_SETUP - = (1 << 13) - | ((fb->fb.var.xres - 1) << 4) - | 0xc - | (extra->hrmode ? 1 : 0); - ALI_CONTROL - = ((extra->clsen ? 1 : 0) << 1) - | ((extra->spsen ? 1 : 0) << 0); - ALI_TIMING1 - = (extra->pcdel << 8) - | (extra->revdel << 4) - | (extra->lpdel << 0); - ALI_TIMING2 - = (extra->spldel << 9) - | (extra->pc2del << 0); - } - else - ALI_SETUP - = (1 << 13) - | 0xc; -#endif - -} - -#define FRAMESIZE(s) (((s) + PAGE_SIZE - 1)&PAGE_MASK) - -static int lh7a40x_clcd_setup (struct clcd_fb *fb) -{ - dma_addr_t dma; - u32 len = FRAMESIZE (lcd_panel.mode.xres*lcd_panel.mode.yres - *(lcd_panel.bpp/8)); - - fb->panel = &lcd_panel; - - /* Enforce the sync polarity defaults */ - if (!(fb->panel->tim2 & TIM2_IHS)) - fb->fb.var.sync |= FB_SYNC_HOR_HIGH_ACT; - if (!(fb->panel->tim2 & TIM2_IVS)) - fb->fb.var.sync |= FB_SYNC_VERT_HIGH_ACT; - -#if defined (HAS_LCD_PANEL_EXTRA) - fb->board_data = &lcd_panel_extra; -#endif - - fb->fb.screen_base - = dma_alloc_writecombine (&fb->dev->dev, len, - &dma, GFP_KERNEL); - printk ("CLCD: LCD setup fb virt 0x%p phys 0x%p l %x io 0x%p \n", - fb->fb.screen_base, (void*) dma, len, - (void*) io_p2v (CLCDC_PHYS)); - printk ("CLCD: pixclock %d\n", lcd_panel.mode.pixclock); - - if (!fb->fb.screen_base) { - printk(KERN_ERR "CLCD: unable to map framebuffer\n"); - return -ENOMEM; - } - -#if defined (USE_RGB555) - fb->fb.var.green.length = 5; /* Panel uses RGB 5:5:5 */ -#endif - - fb->fb.fix.smem_start = dma; - fb->fb.fix.smem_len = len; - - /* Drive PE4 high to prevent CPLD crash */ - GPIO_PEDD |= (1<<4); - GPIO_PED |= (1<<4); - - GPIO_PINMUX |= (1<<1) | (1<<0); /* LCDVD[15:4] */ - -// fb->fb.fbops->fb_check_var (&fb->fb.var, &fb->fb); -// fb->fb.fbops->fb_set_par (&fb->fb); - - return 0; -} - -static int lh7a40x_clcd_mmap (struct clcd_fb *fb, struct vm_area_struct *vma) -{ - return dma_mmap_writecombine(&fb->dev->dev, vma, - fb->fb.screen_base, - fb->fb.fix.smem_start, - fb->fb.fix.smem_len); -} - -static void lh7a40x_clcd_remove (struct clcd_fb *fb) -{ - dma_free_writecombine (&fb->dev->dev, fb->fb.fix.smem_len, - fb->fb.screen_base, fb->fb.fix.smem_start); -} - -static struct clcd_board clcd_platform_data = { - .name = "lh7a40x FB", - .check = clcdfb_check, - .decode = clcdfb_decode, - .enable = lh7a40x_clcd_enable, - .setup = lh7a40x_clcd_setup, - .mmap = lh7a40x_clcd_mmap, - .remove = lh7a40x_clcd_remove, - .disable = lh7a40x_clcd_disable, -}; - -#define IRQ_CLCDC (IRQ_LCDINTR) - -#define AMBA_DEVICE(name,busid,base,plat,pid) \ -static struct amba_device name##_device = { \ - .dev = { \ - .coherent_dma_mask = ~0, \ - .init_name = busid, \ - .platform_data = plat, \ - }, \ - .res = { \ - .start = base##_PHYS, \ - .end = (base##_PHYS) + (4*1024) - 1, \ - .flags = IORESOURCE_MEM, \ - }, \ - .dma_mask = ~0, \ - .irq = { IRQ_##base, }, \ - /* .dma = base##_DMA,*/ \ - .periphid = pid, \ -} - -AMBA_DEVICE(clcd, "cldc-lh7a40x", CLCDC, &clcd_platform_data, 0x41110); - -static struct amba_device *amba_devs[] __initdata = { - &clcd_device, -}; - -void __init lh7a40x_clcd_init (void) -{ - int i; - int result; - printk ("CLCD: registering amba devices\n"); - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { - struct amba_device *d = amba_devs[i]; - result = amba_device_register(d, &iomem_resource); - printk (" %d -> %d\n", i ,result); - } -} diff --git a/arch/arm/mach-lh7a40x/clocks.c b/arch/arm/mach-lh7a40x/clocks.c deleted file mode 100644 index 0651f96653f..00000000000 --- a/arch/arm/mach-lh7a40x/clocks.c +++ /dev/null @@ -1,108 +0,0 @@ -/* arch/arm/mach-lh7a40x/clocks.c - * - * Copyright (C) 2004 Marc Singer - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ -#include -#include -#include -#include -#include - -struct module; - -struct clk { - struct list_head node; - unsigned long rate; - struct module *owner; - const char *name; -}; - -/* ----- */ - -#define MAINDIV1(c) (((c) >> 7) & 0x0f) -#define MAINDIV2(c) (((c) >> 11) & 0x1f) -#define PS(c) (((c) >> 18) & 0x03) -#define PREDIV(c) (((c) >> 2) & 0x1f) -#define HCLKDIV(c) (((c) >> 0) & 0x02) -#define PCLKDIV(c) (((c) >> 16) & 0x03) - -unsigned int fclkfreq_get (void) -{ - unsigned int clkset = CSC_CLKSET; - unsigned int gclk - = XTAL_IN - / (1 << PS(clkset)) - * (MAINDIV1(clkset) + 2) - / (PREDIV(clkset) + 2) - * (MAINDIV2(clkset) + 2) - ; - return gclk; -} - -unsigned int hclkfreq_get (void) -{ - unsigned int clkset = CSC_CLKSET; - unsigned int hclk = fclkfreq_get () / (HCLKDIV(clkset) + 1); - - return hclk; -} - -unsigned int pclkfreq_get (void) -{ - unsigned int clkset = CSC_CLKSET; - int pclkdiv = PCLKDIV(clkset); - unsigned int pclk; - if (pclkdiv == 0x3) - pclkdiv = 0x2; - pclk = hclkfreq_get () / (1 << pclkdiv); - - return pclk; -} - -/* ----- */ - -struct clk *clk_get (struct device *dev, const char *id) -{ - return dev && strcmp(dev_name(dev), "cldc-lh7a40x") == 0 - ? NULL : ERR_PTR(-ENOENT); -} -EXPORT_SYMBOL(clk_get); - -void clk_put (struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); - -int clk_enable (struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable (struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate (struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_get_rate); - -long clk_round_rate (struct clk *clk, unsigned long rate) -{ - return rate; -} -EXPORT_SYMBOL(clk_round_rate); - -int clk_set_rate (struct clk *clk, unsigned long rate) -{ - return -EIO; -} -EXPORT_SYMBOL(clk_set_rate); diff --git a/arch/arm/mach-lh7a40x/common.h b/arch/arm/mach-lh7a40x/common.h deleted file mode 100644 index 6ed3f6b6db7..00000000000 --- a/arch/arm/mach-lh7a40x/common.h +++ /dev/null @@ -1,17 +0,0 @@ -/* arch/arm/mach-lh7a40x/common.h - * - * Copyright (C) 2004 Marc Singer - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -extern struct sys_timer lh7a40x_timer; - -extern void lh7a400_init_irq (void); -extern void lh7a404_init_irq (void); -extern void lh7a40x_clcd_init (void); -extern void lh7a40x_init_board_irq (void); - diff --git a/arch/arm/mach-lh7a40x/include/mach/clocks.h b/arch/arm/mach-lh7a40x/include/mach/clocks.h deleted file mode 100644 index fe2e0255c08..00000000000 --- a/arch/arm/mach-lh7a40x/include/mach/clocks.h +++ /dev/null @@ -1,18 +0,0 @@ -/* arch/arm/mach-lh7a40x/include/mach/clocks.h - * - * Copyright (C) 2004 Marc Singer - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -#ifndef __ASM_ARCH_CLOCKS_H -#define __ASM_ARCH_CLOCKS_H - -unsigned int fclkfreq_get (void); -unsigned int hclkfreq_get (void); -unsigned int pclkfreq_get (void); - -#endif /* _ASM_ARCH_CLOCKS_H */ diff --git a/arch/arm/mach-lh7a40x/include/mach/constants.h b/arch/arm/mach-lh7a40x/include/mach/constants.h deleted file mode 100644 index 55c6edbc2df..00000000000 --- a/arch/arm/mach-lh7a40x/include/mach/constants.h +++ /dev/null @@ -1,91 +0,0 @@ -/* arch/arm/mach-lh7a40x/include/mach/constants.h - * - * Copyright (C) 2004 Coastal Environmental Systems - * Copyright (C) 2004 Logic Product Development - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -#ifndef __ASM_ARCH_CONSTANTS_H -#define __ASM_ARCH_CONSTANTS_H - - -/* Addressing constants */ - - /* SoC CPU IO addressing */ -#define IO_PHYS (0x80000000) -#define IO_VIRT (0xf8000000) -#define IO_SIZE (0x0000B000) - -#ifdef CONFIG_MACH_KEV7A400 -# define CPLD_PHYS (0x20000000) -# define CPLD_VIRT (0xf2000000) -# define CPLD_SIZE PAGE_SIZE -#endif - -#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404) - -# define IOBARRIER_PHYS 0x10000000 /* Second bank, fastest timing */ -# define IOBARRIER_VIRT 0xf0000000 -# define IOBARRIER_SIZE PAGE_SIZE - -# define CF_PHYS 0x60200000 -# define CF_VIRT 0xf6020000 -# define CF_SIZE (8*1024) - - /* The IO mappings for the LPD CPLD are, unfortunately, sparse. */ -# define CPLDX_PHYS(x) (0x70000000 | ((x) << 20)) -# define CPLDX_VIRT(x) (0xf7000000 | ((x) << 16)) -# define CPLD00_PHYS CPLDX_PHYS (0x00) /* Wired LAN */ -# define CPLD00_VIRT CPLDX_VIRT (0x00) -# define CPLD00_SIZE PAGE_SIZE -# define CPLD02_PHYS CPLDX_PHYS (0x02) -# define CPLD02_VIRT CPLDX_VIRT (0x02) -# define CPLD02_SIZE PAGE_SIZE -# define CPLD06_PHYS CPLDX_PHYS (0x06) -# define CPLD06_VIRT CPLDX_VIRT (0x06) -# define CPLD06_SIZE PAGE_SIZE -# define CPLD08_PHYS CPLDX_PHYS (0x08) -# define CPLD08_VIRT CPLDX_VIRT (0x08) -# define CPLD08_SIZE PAGE_SIZE -# define CPLD0A_PHYS CPLDX_PHYS (0x0a) -# define CPLD0A_VIRT CPLDX_VIRT (0x0a) -# define CPLD0A_SIZE PAGE_SIZE -# define CPLD0C_PHYS CPLDX_PHYS (0x0c) -# define CPLD0C_VIRT CPLDX_VIRT (0x0c) -# define CPLD0C_SIZE PAGE_SIZE -# define CPLD0E_PHYS CPLDX_PHYS (0x0e) -# define CPLD0E_VIRT CPLDX_VIRT (0x0e) -# define CPLD0E_SIZE PAGE_SIZE -# define CPLD10_PHYS CPLDX_PHYS (0x10) -# define CPLD10_VIRT CPLDX_VIRT (0x10) -# define CPLD10_SIZE PAGE_SIZE -# define CPLD12_PHYS CPLDX_PHYS (0x12) -# define CPLD12_VIRT CPLDX_VIRT (0x12) -# define CPLD12_SIZE PAGE_SIZE -# define CPLD14_PHYS CPLDX_PHYS (0x14) -# define CPLD14_VIRT CPLDX_VIRT (0x14) -# define CPLD14_SIZE PAGE_SIZE -# define CPLD16_PHYS CPLDX_PHYS (0x16) -# define CPLD16_VIRT CPLDX_VIRT (0x16) -# define CPLD16_SIZE PAGE_SIZE -# define CPLD18_PHYS CPLDX_PHYS (0x18) -# define CPLD18_VIRT CPLDX_VIRT (0x18) -# define CPLD18_SIZE PAGE_SIZE -# define CPLD1A_PHYS CPLDX_PHYS (0x1a) -# define CPLD1A_VIRT CPLDX_VIRT (0x1a) -# define CPLD1A_SIZE PAGE_SIZE -#endif - - /* Timing constants */ - -#define XTAL_IN 14745600 /* 14.7456 MHz crystal */ -#define PLL_CLOCK (XTAL_IN * 21) /* 309 MHz PLL clock */ -#define MAX_HCLK_KHZ 100000 /* HCLK max limit ~100MHz */ -#define HCLK (99993600) -//#define HCLK (119808000) - -#endif /* __ASM_ARCH_CONSTANTS_H */ diff --git a/arch/arm/mach-lh7a40x/include/mach/debug-macro.S b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S deleted file mode 100644 index cff33625276..00000000000 --- a/arch/arm/mach-lh7a40x/include/mach/debug-macro.S +++ /dev/null @@ -1,37 +0,0 @@ -/* arch/arm/mach-lh7a40x/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - @ It is not known if this will be appropriate for every 40x - @ board. - - .macro addruart, rp, rv - mov \rp, #0x00000700 @ offset from base - orr \rv, \rp, #0xf8000000 @ virtual base - orr \rp, \rp, #0x80000000 @ physical base - .endm - - .macro senduart,rd,rx - strb \rd, [\rx] @ DATA - .endm - - .macro busyuart,rd,rx @ spin while busy -1001: ldr \rd, [\rx, #0x10] @ STATUS - tst \rd, #1 << 3 @ BUSY (TX FIFO not empty) - bne 1001b @ yes, spin - .endm - - .macro waituart,rd,rx @ wait for Tx FIFO room -1001: ldrb \rd, [\rx, #0x10] @ STATUS - tst \rd, #1 << 5 @ TXFF (TX FIFO full) - bne 1001b @ yes, spin - .endm diff --git a/arch/arm/mach-lh7a40x/include/mach/dma.h b/arch/arm/mach-lh7a40x/include/mach/dma.h deleted file mode 100644 index baa3f8dbd04..00000000000 --- a/arch/arm/mach-lh7a40x/include/mach/dma.h +++ /dev/null @@ -1,86 +0,0 @@ -/* arch/arm/mach-lh7a40x/include/mach/dma.h - * - * Copyright (C) 2005 Marc Singer - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -typedef enum { - DMA_M2M0 = 0, - DMA_M2M1 = 1, - DMA_M2P0 = 2, /* Tx */ - DMA_M2P1 = 3, /* Rx */ - DMA_M2P2 = 4, /* Tx */ - DMA_M2P3 = 5, /* Rx */ - DMA_M2P4 = 6, /* Tx - AC97 */ - DMA_M2P5 = 7, /* Rx - AC97 */ - DMA_M2P6 = 8, /* Tx */ - DMA_M2P7 = 9, /* Rx */ -} dma_device_t; - -#define DMA_LENGTH_MAX ((64*1024) - 4) /* bytes */ - -#define DMAC_GCA __REG(DMAC_PHYS + 0x2b80) -#define DMAC_GIR __REG(DMAC_PHYS + 0x2bc0) - -#define DMAC_GIR_MMI1 (1<<11) -#define DMAC_GIR_MMI0 (1<<10) -#define DMAC_GIR_MPI8 (1<<9) -#define DMAC_GIR_MPI9 (1<<8) -#define DMAC_GIR_MPI6 (1<<7) -#define DMAC_GIR_MPI7 (1<<6) -#define DMAC_GIR_MPI4 (1<<5) -#define DMAC_GIR_MPI5 (1<<4) -#define DMAC_GIR_MPI2 (1<<3) -#define DMAC_GIR_MPI3 (1<<2) -#define DMAC_GIR_MPI0 (1<<1) -#define DMAC_GIR_MPI1 (1<<0) - -#define DMAC_M2P0 0x0000 -#define DMAC_M2P1 0x0040 -#define DMAC_M2P2 0x0080 -#define DMAC_M2P3 0x00c0 -#define DMAC_M2P4 0x0240 -#define DMAC_M2P5 0x0200 -#define DMAC_M2P6 0x02c0 -#define DMAC_M2P7 0x0280 -#define DMAC_M2P8 0x0340 -#define DMAC_M2P9 0x0300 -#define DMAC_M2M0 0x0100 -#define DMAC_M2M1 0x0140 - -#define DMAC_P_PCONTROL(c) __REG(DMAC_PHYS + (c) + 0x00) -#define DMAC_P_PINTERRUPT(c) __REG(DMAC_PHYS + (c) + 0x04) -#define DMAC_P_PPALLOC(c) __REG(DMAC_PHYS + (c) + 0x08) -#define DMAC_P_PSTATUS(c) __REG(DMAC_PHYS + (c) + 0x0c) -#define DMAC_P_REMAIN(c) __REG(DMAC_PHYS + (c) + 0x14) -#define DMAC_P_MAXCNT0(c) __REG(DMAC_PHYS + (c) + 0x20) -#define DMAC_P_BASE0(c) __REG(DMAC_PHYS + (c) + 0x24) -#define DMAC_P_CURRENT0(c) __REG(DMAC_PHYS + (c) + 0x28) -#define DMAC_P_MAXCNT1(c) __REG(DMAC_PHYS + (c) + 0x30) -#define DMAC_P_BASE1(c) __REG(DMAC_PHYS + (c) + 0x34) -#define DMAC_P_CURRENT1(c) __REG(DMAC_PHYS + (c) + 0x38) - -#define DMAC_PCONTROL_ENABLE (1<<4) - -#define DMAC_PORT_USB 0 -#define DMAC_PORT_SDMMC 1 -#define DMAC_PORT_AC97_1 2 -#define DMAC_PORT_AC97_2 3 -#define DMAC_PORT_AC97_3 4 -#define DMAC_PORT_UART1 6 -#define DMAC_PORT_UART2 7 -#define DMAC_PORT_UART3 8 - -#define DMAC_PSTATUS_CURRSTATE_SHIFT 4 -#define DMAC_PSTATUS_CURRSTATE_MASK 0x3 - -#define DMAC_PSTATUS_NEXTBUF (1<<6) -#define DMAC_PSTATUS_STALLRINT (1<<0) - -#define DMAC_INT_CHE (1<<3) -#define DMAC_INT_NFB (1<<1) -#define DMAC_INT_STALL (1<<0) diff --git a/arch/arm/mach-lh7a40x/include/mach/entry-macro.S b/arch/arm/mach-lh7a40x/include/mach/entry-macro.S deleted file mode 100644 index 069bb4cefff..00000000000 --- a/arch/arm/mach-lh7a40x/include/mach/entry-macro.S +++ /dev/null @@ -1,149 +0,0 @@ -/* - * arch/arm/mach-lh7a40x/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for LH7A40x platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include -#include - -/* In order to allow there to be support for both of the processor - classes at the same time, we make a hack here that isn't very - pretty. At startup, the link pointed to with the - branch_irq_lh7a400 symbol is replaced with a NOP when the CPU is - detected as a lh7a404. - - *** FIXME: we should clean this up so that there is only one - implementation for each CPU's design. - -*/ - -#if defined (CONFIG_ARCH_LH7A400) && defined (CONFIG_ARCH_LH7A404) - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - -branch_irq_lh7a400: b 1000f - -@ Implementation of the LH7A404 get_irqnr_and_base. - - mov \irqnr, #0 @ VIC1 irq base - mov \base, #io_p2v(0x80000000) @ APB registers - add \base, \base, #0x8000 - ldr \tmp, [\base, #0x0030] @ VIC1_VECTADDR - tst \tmp, #VA_VECTORED @ Direct vectored - bne 1002f - tst \tmp, #VA_VIC1DEFAULT @ Default vectored VIC1 - ldrne \irqstat, [\base, #0] @ VIC1_IRQSTATUS - bne 1001f - add \base, \base, #(0xa000 - 0x8000) - ldr \tmp, [\base, #0x0030] @ VIC2_VECTADDR - tst \tmp, #VA_VECTORED @ Direct vectored - bne 1002f - ldr \irqstat, [\base, #0] @ VIC2_IRQSTATUS - mov \irqnr, #32 @ VIC2 irq base - -1001: movs \irqstat, \irqstat, lsr #1 @ Shift into carry - bcs 1008f @ Bit set; irq found - add \irqnr, \irqnr, #1 - bne 1001b @ Until no bits - b 1009f @ Nothing? Hmm. -1002: and \irqnr, \tmp, #0x3f @ Mask for valid bits -1008: movs \irqstat, #1 @ Force !Z - str \tmp, [\base, #0x0030] @ Clear vector - b 1009f - -@ Implementation of the LH7A400 get_irqnr_and_base. - -1000: mov \irqnr, #0 - mov \base, #io_p2v(0x80000000) @ APB registers - ldr \irqstat, [\base, #0x500] @ PIC INTSR - -1001: movs \irqstat, \irqstat, lsr #1 @ Shift into carry - bcs 1008f @ Bit set; irq found - add \irqnr, \irqnr, #1 - bne 1001b @ Until no bits - b 1009f @ Nothing? Hmm. -1008: movs \irqstat, #1 @ Force !Z - -1009: - .endm - - - -#elif defined (CONFIG_ARCH_LH7A400) - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - mov \irqnr, #0 - mov \base, #io_p2v(0x80000000) @ APB registers - ldr \irqstat, [\base, #0x500] @ PIC INTSR - -1001: movs \irqstat, \irqstat, lsr #1 @ Shift into carry - bcs 1008f @ Bit set; irq found - add \irqnr, \irqnr, #1 - bne 1001b @ Until no bits - b 1009f @ Nothing? Hmm. -1008: movs \irqstat, #1 @ Force !Z -1009: - .endm - -#elif defined(CONFIG_ARCH_LH7A404) - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - mov \irqnr, #0 @ VIC1 irq base - mov \base, #io_p2v(0x80000000) @ APB registers - add \base, \base, #0x8000 - ldr \tmp, [\base, #0x0030] @ VIC1_VECTADDR - tst \tmp, #VA_VECTORED @ Direct vectored - bne 1002f - tst \tmp, #VA_VIC1DEFAULT @ Default vectored VIC1 - ldrne \irqstat, [\base, #0] @ VIC1_IRQSTATUS - bne 1001f - add \base, \base, #(0xa000 - 0x8000) - ldr \tmp, [\base, #0x0030] @ VIC2_VECTADDR - tst \tmp, #VA_VECTORED @ Direct vectored - bne 1002f - ldr \irqstat, [\base, #0] @ VIC2_IRQSTATUS - mov \irqnr, #32 @ VIC2 irq base - -1001: movs \irqstat, \irqstat, lsr #1 @ Shift into carry - bcs 1008f @ Bit set; irq found - add \irqnr, \irqnr, #1 - bne 1001b @ Until no bits - b 1009f @ Nothing? Hmm. -1002: and \irqnr, \tmp, #0x3f @ Mask for valid bits -1008: movs \irqstat, #1 @ Force !Z - str \tmp, [\base, #0x0030] @ Clear vector -1009: - .endm -#endif - - diff --git a/arch/arm/mach-lh7a40x/include/mach/hardware.h b/arch/arm/mach-lh7a40x/include/mach/hardware.h deleted file mode 100644 index 59d2ace3521..00000000000 --- a/arch/arm/mach-lh7a40x/include/mach/hardware.h +++ /dev/null @@ -1,62 +0,0 @@ -/* arch/arm/mach-lh7a40x/include/mach/hardware.h - * - * Copyright (C) 2004 Coastal Environmental Systems - * - * [ Substantially cribbed from arch/arm/mach-pxa/include/mach/hardware.h ] - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include /* Added for the sake of amba-clcd driver */ - -#define io_p2v(x) (0xf0000000 | (((x) & 0xfff00000) >> 4) | ((x) & 0x0000ffff)) -#define io_v2p(x) ( (((x) & 0x0fff0000) << 4) | ((x) & 0x0000ffff)) - -#ifdef __ASSEMBLY__ - -# define __REG(x) io_p2v(x) -# define __PREG(x) io_v2p(x) - -#else - -# if 0 -# define __REG(x) (*((volatile u32 *)io_p2v(x))) -# else -/* - * This __REG() version gives the same results as the one above, except - * that we are fooling gcc somehow so it generates far better and smaller - * assembly code for access to contiguous registers. It's a shame that gcc - * doesn't guess this by itself. - */ -#include -typedef struct { volatile u32 offset[4096]; } __regbase; -# define __REGP(x) ((__regbase *)((x)&~4095))->offset[((x)&4095)>>2] -# define __REG(x) __REGP(io_p2v(x)) -typedef struct { volatile u16 offset[4096]; } __regbase16; -# define __REGP16(x) ((__regbase16 *)((x)&~4095))->offset[((x)&4095)>>1] -# define __REG16(x) __REGP16(io_p2v(x)) -typedef struct { volatile u8 offset[4096]; } __regbase8; -# define __REGP8(x) ((__regbase8 *)((x)&~4095))->offset[(x)&4095] -# define __REG8(x) __REGP8(io_p2v(x)) -#endif - -/* Let's kick gcc's ass again... */ -# define __REG2(x,y) \ - ( __builtin_constant_p(y) ? (__REG((x) + (y))) \ - : (*(volatile u32 *)((u32)&__REG(x) + (y))) ) - -# define __PREG(x) (io_v2p((u32)&(x))) - -#endif - -#define MASK_AND_SET(v,m,s) (v) = ((v)&~(m))|(s) - -#include "registers.h" - -#endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-lh7a40x/include/mach/io.h b/arch/arm/mach-lh7a40x/include/mach/io.h deleted file mode 100644 index 6ece45911cb..00000000000 --- a/arch/arm/mach-lh7a40x/include/mach/io.h +++ /dev/null @@ -1,20 +0,0 @@ -/* arch/arm/mach-lh7a40x/include/mach/io.h - * - * Copyright (C) 2004 Coastal Environmental Systems - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -/* No ISA or PCI bus on this machine. */ -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#endif /* __ASM_ARCH_IO_H */ diff --git a/arch/arm/mach-lh7a40x/include/mach/irqs.h b/arch/arm/mach-lh7a40x/include/mach/irqs.h deleted file mode 100644 index 0f9b8367593..00000000000 --- a/arch/arm/mach-lh7a40x/include/mach/irqs.h +++ /dev/null @@ -1,200 +0,0 @@ -/* arch/arm/mach-lh7a40x/include/mach/irqs.h - * - * Copyright (C) 2004 Coastal Environmental Systems - * Copyright (C) 2004 Logic Product Development - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -/* It is to be seen whether or not we can build a kernel for more than - * one board. For the time being, these macros assume that we cannot. - * Thus, it is OK to ifdef machine/board specific IRQ assignments. - */ - - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - - -#define FIQ_START 80 - -#if defined (CONFIG_ARCH_LH7A400) - - /* FIQs */ - -# define IRQ_GPIO0FIQ 0 /* GPIO External FIQ Interrupt on F0 */ -# define IRQ_BLINT 1 /* Battery Low */ -# define IRQ_WEINT 2 /* Watchdog Timer, WDT overflow */ -# define IRQ_MCINT 3 /* Media Change, MEDCHG pin rising */ - - /* IRQs */ - -# define IRQ_CSINT 4 /* Audio Codec (ACI) */ -# define IRQ_GPIO1INTR 5 /* GPIO External IRQ Interrupt on F1 */ -# define IRQ_GPIO2INTR 6 /* GPIO External IRQ Interrupt on F2 */ -# define IRQ_GPIO3INTR 7 /* GPIO External IRQ Interrupt on F3 */ -# define IRQ_T1UI 8 /* Timer 1 underflow */ -# define IRQ_T2UI 9 /* Timer 2 underflow */ -# define IRQ_RTCMI 10 -# define IRQ_TINTR 11 /* Clock State Controller 64 Hz tick (CSC) */ -# define IRQ_UART1INTR 12 -# define IRQ_UART2INTR 13 -# define IRQ_LCDINTR 14 -# define IRQ_SSIEOT 15 /* Synchronous Serial Interface (SSI) */ -# define IRQ_UART3INTR 16 -# define IRQ_SCIINTR 17 /* Smart Card Interface (SCI) */ -# define IRQ_AACINTR 18 /* Advanced Audio Codec (AAC) */ -# define IRQ_MMCINTR 19 /* Multimedia Card (MMC) */ -# define IRQ_USBINTR 20 -# define IRQ_DMAINTR 21 -# define IRQ_T3UI 22 /* Timer 3 underflow */ -# define IRQ_GPIO4INTR 23 /* GPIO External IRQ Interrupt on F4 */ -# define IRQ_GPIO5INTR 24 /* GPIO External IRQ Interrupt on F5 */ -# define IRQ_GPIO6INTR 25 /* GPIO External IRQ Interrupt on F6 */ -# define IRQ_GPIO7INTR 26 /* GPIO External IRQ Interrupt on F7 */ -# define IRQ_BMIINTR 27 /* Battery Monitor Interface (BMI) */ - -# define NR_IRQ_CPU 28 /* IRQs directly recognized by CPU */ - - /* Given IRQ, return GPIO interrupt number 0-7 */ -# define IRQ_TO_GPIO(i) ((i) \ - - (((i) > IRQ_GPIO3INTR) ? IRQ_GPIO4INTR - IRQ_GPIO3INTR - 1 : 0)\ - - (((i) > IRQ_GPIO0INTR) ? IRQ_GPIO1INTR - IRQ_GPIO0INTR - 1 : 0)) - -#endif - -#if defined (CONFIG_ARCH_LH7A404) - -# define IRQ_BROWN 0 /* Brownout */ -# define IRQ_WDTINTR 1 /* Watchdog Timer */ -# define IRQ_COMMRX 2 /* ARM Comm Rx for Debug */ -# define IRQ_COMMTX 3 /* ARM Comm Tx for Debug */ -# define IRQ_T1UI 4 /* Timer 1 underflow */ -# define IRQ_T2UI 5 /* Timer 2 underflow */ -# define IRQ_CSINT 6 /* Codec Interrupt (shared by AAC on 404) */ -# define IRQ_DMAM2P0 7 /* -- DMA Memory to Peripheral */ -# define IRQ_DMAM2P1 8 -# define IRQ_DMAM2P2 9 -# define IRQ_DMAM2P3 10 -# define IRQ_DMAM2P4 11 -# define IRQ_DMAM2P5 12 -# define IRQ_DMAM2P6 13 -# define IRQ_DMAM2P7 14 -# define IRQ_DMAM2P8 15 -# define IRQ_DMAM2P9 16 -# define IRQ_DMAM2M0 17 /* -- DMA Memory to Memory */ -# define IRQ_DMAM2M1 18 -# define IRQ_GPIO0INTR 19 /* -- GPIOF Interrupt */ -# define IRQ_GPIO1INTR 20 -# define IRQ_GPIO2INTR 21 -# define IRQ_GPIO3INTR 22 -# define IRQ_SOFT_V1_23 23 /* -- Unassigned */ -# define IRQ_SOFT_V1_24 24 -# define IRQ_SOFT_V1_25 25 -# define IRQ_SOFT_V1_26 26 -# define IRQ_SOFT_V1_27 27 -# define IRQ_SOFT_V1_28 28 -# define IRQ_SOFT_V1_29 29 -# define IRQ_SOFT_V1_30 30 -# define IRQ_SOFT_V1_31 31 - -# define IRQ_BLINT 32 /* Battery Low */ -# define IRQ_BMIINTR 33 /* Battery Monitor */ -# define IRQ_MCINTR 34 /* Media Change */ -# define IRQ_TINTR 35 /* 64Hz Tick */ -# define IRQ_WEINT 36 /* Watchdog Expired */ -# define IRQ_RTCMI 37 /* Real-time Clock Match */ -# define IRQ_UART1INTR 38 /* UART1 Interrupt (including error) */ -# define IRQ_UART1ERR 39 /* UART1 Error */ -# define IRQ_UART2INTR 40 /* UART2 Interrupt (including error) */ -# define IRQ_UART2ERR 41 /* UART2 Error */ -# define IRQ_UART3INTR 42 /* UART3 Interrupt (including error) */ -# define IRQ_UART3ERR 43 /* UART3 Error */ -# define IRQ_SCIINTR 44 /* Smart Card */ -# define IRQ_TSCINTR 45 /* Touchscreen */ -# define IRQ_KMIINTR 46 /* Keyboard/Mouse (PS/2) */ -# define IRQ_GPIO4INTR 47 /* -- GPIOF Interrupt */ -# define IRQ_GPIO5INTR 48 -# define IRQ_GPIO6INTR 49 -# define IRQ_GPIO7INTR 50 -# define IRQ_T3UI 51 /* Timer 3 underflow */ -# define IRQ_LCDINTR 52 /* LCD Controller */ -# define IRQ_SSPINTR 53 /* Synchronous Serial Port */ -# define IRQ_SDINTR 54 /* Secure Digital Port (MMC) */ -# define IRQ_USBINTR 55 /* USB Device Port */ -# define IRQ_USHINTR 56 /* USB Host Port */ -# define IRQ_SOFT_V2_25 57 /* -- Unassigned */ -# define IRQ_SOFT_V2_26 58 -# define IRQ_SOFT_V2_27 59 -# define IRQ_SOFT_V2_28 60 -# define IRQ_SOFT_V2_29 61 -# define IRQ_SOFT_V2_30 62 -# define IRQ_SOFT_V2_31 63 - -# define NR_IRQ_CPU 64 /* IRQs directly recognized by CPU */ - - /* Given IRQ, return GPIO interrupt number 0-7 */ -# define IRQ_TO_GPIO(i) ((i) \ - - (((i) > IRQ_GPIO3INTR) ? IRQ_GPIO4INTR - IRQ_GPIO3INTR - 1 : 0)\ - - IRQ_GPIO0INTR) - - /* Vector Address constants */ -# define VA_VECTORED 0x100 /* Set for vectored interrupt */ -# define VA_VIC1DEFAULT 0x200 /* Set as default VECTADDR for VIC1 */ -# define VA_VIC2DEFAULT 0x400 /* Set as default VECTADDR for VIC2 */ - -#endif - - /* IRQ aliases */ - -#if !defined (IRQ_GPIO0INTR) -# define IRQ_GPIO0INTR IRQ_GPIO0FIQ -#endif -#define IRQ_TICK IRQ_TINTR -#define IRQ_PCC1_RDY IRQ_GPIO6INTR /* PCCard 1 ready */ -#define IRQ_PCC2_RDY IRQ_GPIO7INTR /* PCCard 2 ready */ -#define IRQ_USB IRQ_USBINTR /* USB device */ - -#ifdef CONFIG_MACH_KEV7A400 -# define IRQ_TS IRQ_GPIOFIQ /* Touchscreen */ -# define IRQ_CPLD IRQ_GPIO1INTR /* CPLD cascade */ -# define IRQ_PCC1_CD IRQ_GPIO_F2 /* PCCard 1 card detect */ -# define IRQ_PCC2_CD IRQ_GPIO_F3 /* PCCard 2 card detect */ -#endif - -#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404) -# define IRQ_CPLD_V28 IRQ_GPIO7INTR /* CPLD cascade through GPIO_PF7 */ -# define IRQ_CPLD_V34 IRQ_GPIO3INTR /* CPLD cascade through GPIO_PF3 */ -#endif - - /* System specific IRQs */ - -#define IRQ_BOARD_START NR_IRQ_CPU - -#ifdef CONFIG_MACH_KEV7A400 -# define IRQ_KEV7A400_CPLD IRQ_BOARD_START -# define NR_IRQ_BOARD 5 -# define IRQ_KEV7A400_MMC_CD IRQ_KEV7A400_CPLD + 0 /* MMC Card Detect */ -# define IRQ_KEV7A400_RI2 IRQ_KEV7A400_CPLD + 1 /* Ring Indicator 2 */ -# define IRQ_KEV7A400_IDE_CF IRQ_KEV7A400_CPLD + 2 /* Compact Flash (?) */ -# define IRQ_KEV7A400_ETH_INT IRQ_KEV7A400_CPLD + 3 /* Ethernet chip */ -# define IRQ_KEV7A400_INT IRQ_KEV7A400_CPLD + 4 -#endif - -#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404) -# define IRQ_LPD7A40X_CPLD IRQ_BOARD_START -# define NR_IRQ_BOARD 2 -# define IRQ_LPD7A40X_ETH_INT IRQ_LPD7A40X_CPLD + 0 /* Ethernet chip */ -# define IRQ_LPD7A400_TS IRQ_LPD7A40X_CPLD + 1 /* Touch screen */ -#endif - -#if defined (CONFIG_MACH_LPD7A400) -# define IRQ_TOUCH IRQ_LPD7A400_TS -#endif - -#define NR_IRQS (NR_IRQ_CPU + NR_IRQ_BOARD) - -#endif diff --git a/arch/arm/mach-lh7a40x/include/mach/memory.h b/arch/arm/mach-lh7a40x/include/mach/memory.h deleted file mode 100644 index edb8f5faf5d..00000000000 --- a/arch/arm/mach-lh7a40x/include/mach/memory.h +++ /dev/null @@ -1,28 +0,0 @@ -/* arch/arm/mach-lh7a40x/include/mach/memory.h - * - * Copyright (C) 2004 Coastal Environmental Systems - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * - * Refer to for more information. - * - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PHYS_OFFSET UL(0xc0000000) - -/* - * Sparsemem version of the above - */ -#define MAX_PHYSMEM_BITS 32 -#define SECTION_SIZE_BITS 24 - -#endif diff --git a/arch/arm/mach-lh7a40x/include/mach/registers.h b/arch/arm/mach-lh7a40x/include/mach/registers.h deleted file mode 100644 index ea44396383a..00000000000 --- a/arch/arm/mach-lh7a40x/include/mach/registers.h +++ /dev/null @@ -1,224 +0,0 @@ -/* arch/arm/mach-lh7a40x/include/mach/registers.h - * - * Copyright (C) 2004 Coastal Environmental Systems - * Copyright (C) 2004 Logic Product Development - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -#include - -#ifndef __ASM_ARCH_REGISTERS_H -#define __ASM_ARCH_REGISTERS_H - - - /* Physical register base addresses */ - -#define AC97C_PHYS (0x80000000) /* AC97 Controller */ -#define MMC_PHYS (0x80000100) /* Multimedia Card Controller */ -#define USB_PHYS (0x80000200) /* USB Client */ -#define SCI_PHYS (0x80000300) /* Secure Card Interface */ -#define CSC_PHYS (0x80000400) /* Clock/State Controller */ -#define INTC_PHYS (0x80000500) /* Interrupt Controller */ -#define UART1_PHYS (0x80000600) /* UART1 Controller */ -#define SIR_PHYS (0x80000600) /* IR Controller, same are UART1 */ -#define UART2_PHYS (0x80000700) /* UART2 Controller */ -#define UART3_PHYS (0x80000800) /* UART3 Controller */ -#define DCDC_PHYS (0x80000900) /* DC to DC Controller */ -#define ACI_PHYS (0x80000a00) /* Audio Codec Interface */ -#define SSP_PHYS (0x80000b00) /* Synchronous ... */ -#define TIMER_PHYS (0x80000c00) /* Timer Controller */ -#define RTC_PHYS (0x80000d00) /* Real-time Clock */ -#define GPIO_PHYS (0x80000e00) /* General Purpose IO */ -#define BMI_PHYS (0x80000f00) /* Battery Monitor Interface */ -#define HRTFTC_PHYS (0x80001000) /* High-res TFT Controller (LH7A400) */ -#define ALI_PHYS (0x80001000) /* Advanced LCD Interface (LH7A404) */ -#define WDT_PHYS (0x80001400) /* Watchdog Timer */ -#define SMC_PHYS (0x80002000) /* Static Memory Controller */ -#define SDRC_PHYS (0x80002400) /* SDRAM Controller */ -#define DMAC_PHYS (0x80002800) /* DMA Controller */ -#define CLCDC_PHYS (0x80003000) /* Color LCD Controller */ - - /* Physical registers of the LH7A404 */ - -#define ADC_PHYS (0x80001300) /* A/D & Touchscreen Controller */ -#define VIC1_PHYS (0x80008000) /* Vectored Interrupt Controller 1 */ -#define USBH_PHYS (0x80009000) /* USB OHCI host controller */ -#define VIC2_PHYS (0x8000a000) /* Vectored Interrupt Controller 2 */ - -/*#define KBD_PHYS (0x80000e00) */ -/*#define LCDICP_PHYS (0x80001000) */ - - - /* Clock/State Controller register */ - -#define CSC_PWRSR __REG(CSC_PHYS + 0x00) /* Reset register & ID */ -#define CSC_PWRCNT __REG(CSC_PHYS + 0x04) /* Power control */ -#define CSC_CLKSET __REG(CSC_PHYS + 0x20) /* Clock speed control */ -#define CSC_USBDRESET __REG(CSC_PHYS + 0x4c) /* USB Device resets */ - -#define CSC_PWRCNT_USBH_EN (1<<28) /* USB Host power enable */ -#define CSC_PWRCNT_DMAC_M2M1_EN (1<<27) -#define CSC_PWRCNT_DMAC_M2M0_EN (1<<26) -#define CSC_PWRCNT_DMAC_M2P8_EN (1<<25) -#define CSC_PWRCNT_DMAC_M2P9_EN (1<<24) -#define CSC_PWRCNT_DMAC_M2P6_EN (1<<23) -#define CSC_PWRCNT_DMAC_M2P7_EN (1<<22) -#define CSC_PWRCNT_DMAC_M2P4_EN (1<<21) -#define CSC_PWRCNT_DMAC_M2P5_EN (1<<20) -#define CSC_PWRCNT_DMAC_M2P2_EN (1<<19) -#define CSC_PWRCNT_DMAC_M2P3_EN (1<<18) -#define CSC_PWRCNT_DMAC_M2P0_EN (1<<17) -#define CSC_PWRCNT_DMAC_M2P1_EN (1<<16) - -#define CSC_PWRSR_CHIPMAN_SHIFT (24) -#define CSC_PWRSR_CHIPMAN_MASK (0xff) -#define CSC_PWRSR_CHIPID_SHIFT (16) -#define CSC_PWRSR_CHIPID_MASK (0xff) - -#define CSC_USBDRESET_APBRESETREG (1<<1) -#define CSC_USBDRESET_IORESETREG (1<<0) - - /* Interrupt Controller registers */ - -#define INTC_INTSR __REG(INTC_PHYS + 0x00) /* Status */ -#define INTC_INTRSR __REG(INTC_PHYS + 0x04) /* Raw Status */ -#define INTC_INTENS __REG(INTC_PHYS + 0x08) /* Enable Set */ -#define INTC_INTENC __REG(INTC_PHYS + 0x0c) /* Enable Clear */ - - - /* Vectored Interrupted Controller registers */ - -#define VIC1_IRQSTATUS __REG(VIC1_PHYS + 0x00) -#define VIC1_FIQSTATUS __REG(VIC1_PHYS + 0x04) -#define VIC1_RAWINTR __REG(VIC1_PHYS + 0x08) -#define VIC1_INTSEL __REG(VIC1_PHYS + 0x0c) -#define VIC1_INTEN __REG(VIC1_PHYS + 0x10) -#define VIC1_INTENCLR __REG(VIC1_PHYS + 0x14) -#define VIC1_SOFTINT __REG(VIC1_PHYS + 0x18) -#define VIC1_SOFTINTCLR __REG(VIC1_PHYS + 0x1c) -#define VIC1_PROTECT __REG(VIC1_PHYS + 0x20) -#define VIC1_VECTADDR __REG(VIC1_PHYS + 0x30) -#define VIC1_NVADDR __REG(VIC1_PHYS + 0x34) -#define VIC1_VAD0 __REG(VIC1_PHYS + 0x100) -#define VIC1_VECTCNTL0 __REG(VIC1_PHYS + 0x200) -#define VIC2_IRQSTATUS __REG(VIC2_PHYS + 0x00) -#define VIC2_FIQSTATUS __REG(VIC2_PHYS + 0x04) -#define VIC2_RAWINTR __REG(VIC2_PHYS + 0x08) -#define VIC2_INTSEL __REG(VIC2_PHYS + 0x0c) -#define VIC2_INTEN __REG(VIC2_PHYS + 0x10) -#define VIC2_INTENCLR __REG(VIC2_PHYS + 0x14) -#define VIC2_SOFTINT __REG(VIC2_PHYS + 0x18) -#define VIC2_SOFTINTCLR __REG(VIC2_PHYS + 0x1c) -#define VIC2_PROTECT __REG(VIC2_PHYS + 0x20) -#define VIC2_VECTADDR __REG(VIC2_PHYS + 0x30) -#define VIC2_NVADDR __REG(VIC2_PHYS + 0x34) -#define VIC2_VAD0 __REG(VIC2_PHYS + 0x100) -#define VIC2_VECTCNTL0 __REG(VIC2_PHYS + 0x200) - -#define VIC_CNTL_ENABLE (0x20) - - /* USB Host registers (Open HCI compatible) */ - -#define USBH_CMDSTATUS __REG(USBH_PHYS + 0x08) - - - /* GPIO registers */ - -#define GPIO_INTTYPE1 __REG(GPIO_PHYS + 0x4c) /* Interrupt Type 1 (Edge) */ -#define GPIO_INTTYPE2 __REG(GPIO_PHYS + 0x50) /* Interrupt Type 2 */ -#define GPIO_GPIOFEOI __REG(GPIO_PHYS + 0x54) /* GPIO End-of-Interrupt */ -#define GPIO_GPIOINTEN __REG(GPIO_PHYS + 0x58) /* GPIO Interrupt Enable */ -#define GPIO_INTSTATUS __REG(GPIO_PHYS + 0x5c) /* GPIO Interrupt Status */ -#define GPIO_PINMUX __REG(GPIO_PHYS + 0x2c) -#define GPIO_PADD __REG(GPIO_PHYS + 0x10) -#define GPIO_PAD __REG(GPIO_PHYS + 0x00) -#define GPIO_PCD __REG(GPIO_PHYS + 0x08) -#define GPIO_PCDD __REG(GPIO_PHYS + 0x18) -#define GPIO_PEDD __REG(GPIO_PHYS + 0x24) -#define GPIO_PED __REG(GPIO_PHYS + 0x20) - - - /* Static Memory Controller registers */ - -#define SMC_BCR0 __REG(SMC_PHYS + 0x00) /* Bank 0 Configuration */ -#define SMC_BCR1 __REG(SMC_PHYS + 0x04) /* Bank 1 Configuration */ -#define SMC_BCR2 __REG(SMC_PHYS + 0x08) /* Bank 2 Configuration */ -#define SMC_BCR3 __REG(SMC_PHYS + 0x0C) /* Bank 3 Configuration */ -#define SMC_BCR6 __REG(SMC_PHYS + 0x18) /* Bank 6 Configuration */ -#define SMC_BCR7 __REG(SMC_PHYS + 0x1c) /* Bank 7 Configuration */ - - -#ifdef CONFIG_MACH_KEV7A400 -# define CPLD_RD_OPT_DIP_SW __REG16(CPLD_PHYS + 0x00) /* Read Option SW */ -# define CPLD_WR_IO_BRD_CTL __REG16(CPLD_PHYS + 0x00) /* Write Control */ -# define CPLD_RD_PB_KEYS __REG16(CPLD_PHYS + 0x02) /* Read Btn Keys */ -# define CPLD_LATCHED_INTS __REG16(CPLD_PHYS + 0x04) /* Read INTR stat. */ -# define CPLD_CL_INT __REG16(CPLD_PHYS + 0x04) /* Clear INTR stat */ -# define CPLD_BOOT_MMC_STATUS __REG16(CPLD_PHYS + 0x06) /* R/O */ -# define CPLD_RD_KPD_ROW_SENSE __REG16(CPLD_PHYS + 0x08) -# define CPLD_WR_PB_INT_MASK __REG16(CPLD_PHYS + 0x08) -# define CPLD_RD_BRD_DISP_SW __REG16(CPLD_PHYS + 0x0a) -# define CPLD_WR_EXT_INT_MASK __REG16(CPLD_PHYS + 0x0a) -# define CPLD_LCD_PWR_CNTL __REG16(CPLD_PHYS + 0x0c) -# define CPLD_SEVEN_SEG __REG16(CPLD_PHYS + 0x0e) /* 7 seg. LED mask */ - -#endif - -#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404) - -# define CPLD_CONTROL __REG16(CPLD02_PHYS) -# define CPLD_SPI_DATA __REG16(CPLD06_PHYS) -# define CPLD_SPI_CONTROL __REG16(CPLD08_PHYS) -# define CPLD_SPI_EEPROM __REG16(CPLD0A_PHYS) -# define CPLD_INTERRUPTS __REG16(CPLD0C_PHYS) /* IRQ mask/status */ -# define CPLD_BOOT_MODE __REG16(CPLD0E_PHYS) -# define CPLD_FLASH __REG16(CPLD10_PHYS) -# define CPLD_POWER_MGMT __REG16(CPLD12_PHYS) -# define CPLD_REVISION __REG16(CPLD14_PHYS) -# define CPLD_GPIO_EXT __REG16(CPLD16_PHYS) -# define CPLD_GPIO_DATA __REG16(CPLD18_PHYS) -# define CPLD_GPIO_DIR __REG16(CPLD1A_PHYS) - -#endif - - /* Timer registers */ - -#define TIMER_LOAD1 __REG(TIMER_PHYS + 0x00) /* Timer 1 initial value */ -#define TIMER_VALUE1 __REG(TIMER_PHYS + 0x04) /* Timer 1 current value */ -#define TIMER_CONTROL1 __REG(TIMER_PHYS + 0x08) /* Timer 1 control word */ -#define TIMER_EOI1 __REG(TIMER_PHYS + 0x0c) /* Timer 1 interrupt clear */ - -#define TIMER_LOAD2 __REG(TIMER_PHYS + 0x20) /* Timer 2 initial value */ -#define TIMER_VALUE2 __REG(TIMER_PHYS + 0x24) /* Timer 2 current value */ -#define TIMER_CONTROL2 __REG(TIMER_PHYS + 0x28) /* Timer 2 control word */ -#define TIMER_EOI2 __REG(TIMER_PHYS + 0x2c) /* Timer 2 interrupt clear */ - -#define TIMER_BUZZCON __REG(TIMER_PHYS + 0x40) /* Buzzer configuration */ - -#define TIMER_LOAD3 __REG(TIMER_PHYS + 0x80) /* Timer 3 initial value */ -#define TIMER_VALUE3 __REG(TIMER_PHYS + 0x84) /* Timer 3 current value */ -#define TIMER_CONTROL3 __REG(TIMER_PHYS + 0x88) /* Timer 3 control word */ -#define TIMER_EOI3 __REG(TIMER_PHYS + 0x8c) /* Timer 3 interrupt clear */ - -#define TIMER_C_ENABLE (1<<7) -#define TIMER_C_PERIODIC (1<<6) -#define TIMER_C_FREERUNNING (0) -#define TIMER_C_2KHZ (0x00) /* 1.986 kHz */ -#define TIMER_C_508KHZ (0x08) - - /* GPIO registers */ - -#define GPIO_PFDD __REG(GPIO_PHYS + 0x34) /* PF direction */ -#define GPIO_INTTYPE1 __REG(GPIO_PHYS + 0x4c) /* IRQ edge or lvl */ -#define GPIO_INTTYPE2 __REG(GPIO_PHYS + 0x50) /* IRQ activ hi/lo */ -#define GPIO_GPIOFEOI __REG(GPIO_PHYS + 0x54) /* GPIOF end of IRQ */ -#define GPIO_GPIOFINTEN __REG(GPIO_PHYS + 0x58) /* GPIOF IRQ enable */ -#define GPIO_INTSTATUS __REG(GPIO_PHYS + 0x5c) /* GPIOF IRQ latch */ -#define GPIO_RAWINTSTATUS __REG(GPIO_PHYS + 0x60) /* GPIOF IRQ raw */ - - -#endif /* _ASM_ARCH_REGISTERS_H */ diff --git a/arch/arm/mach-lh7a40x/include/mach/ssp.h b/arch/arm/mach-lh7a40x/include/mach/ssp.h deleted file mode 100644 index 509916182e3..00000000000 --- a/arch/arm/mach-lh7a40x/include/mach/ssp.h +++ /dev/null @@ -1,70 +0,0 @@ -/* ssp.h - - written by Marc Singer - 6 Dec 2004 - - Copyright (C) 2004 Marc Singer - - ----------- - DESCRIPTION - ----------- - - This SSP header is available throughout the kernel, for this - machine/architecture, because drivers that use it may be dispersed. - - This file was cloned from the 7952x implementation. It would be - better to share them, but we're taking an easier approach for the - time being. - -*/ - -#if !defined (__SSP_H__) -# define __SSP_H__ - -/* ----- Includes */ - -/* ----- Types */ - -struct ssp_driver { - int (*init) (void); - void (*exit) (void); - void (*acquire) (void); - void (*release) (void); - int (*configure) (int device, int mode, int speed, - int frame_size_write, int frame_size_read); - void (*chip_select) (int enable); - void (*set_callbacks) (void* handle, - irqreturn_t (*callback_tx)(void*), - irqreturn_t (*callback_rx)(void*)); - void (*enable) (void); - void (*disable) (void); -// int (*save_state) (void*); -// void (*restore_state) (void*); - int (*read) (void); - int (*write) (u16 data); - int (*write_read) (u16 data); - void (*flush) (void); - void (*write_async) (void* pv, size_t cb); - size_t (*write_pos) (void); -}; - - /* These modes are only available on the LH79524 */ -#define SSP_MODE_SPI (1) -#define SSP_MODE_SSI (2) -#define SSP_MODE_MICROWIRE (3) -#define SSP_MODE_I2S (4) - - /* CPLD SPI devices */ -#define DEVICE_EEPROM 0 /* Configuration eeprom */ -#define DEVICE_MAC 1 /* MAC eeprom (LPD79524) */ -#define DEVICE_CODEC 2 /* Audio codec */ -#define DEVICE_TOUCH 3 /* Touch screen (LPD79520) */ - -/* ----- Globals */ - -/* ----- Prototypes */ - -//extern struct ssp_driver lh79520_i2s_driver; -extern struct ssp_driver lh7a400_cpld_ssp_driver; - -#endif /* __SSP_H__ */ diff --git a/arch/arm/mach-lh7a40x/include/mach/system.h b/arch/arm/mach-lh7a40x/include/mach/system.h deleted file mode 100644 index 45a56d3b93d..00000000000 --- a/arch/arm/mach-lh7a40x/include/mach/system.h +++ /dev/null @@ -1,19 +0,0 @@ -/* arch/arm/mach-lh7a40x/include/mach/system.h - * - * Copyright (C) 2004 Coastal Environmental Systems - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -static inline void arch_idle(void) -{ - cpu_do_idle (); -} - -static inline void arch_reset(char mode, const char *cmd) -{ - cpu_reset (0); -} diff --git a/arch/arm/mach-lh7a40x/include/mach/timex.h b/arch/arm/mach-lh7a40x/include/mach/timex.h deleted file mode 100644 index 08028cef1b3..00000000000 --- a/arch/arm/mach-lh7a40x/include/mach/timex.h +++ /dev/null @@ -1,17 +0,0 @@ -/* arch/arm/mach-lh7a40x/include/mach/timex.h - * - * Copyright (C) 2004 Coastal Environmental Systems - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -#include - -#define CLOCK_TICK_RATE (PLL_CLOCK/6/16) - -/* -#define CLOCK_TICK_RATE 3686400 -*/ diff --git a/arch/arm/mach-lh7a40x/include/mach/uncompress.h b/arch/arm/mach-lh7a40x/include/mach/uncompress.h deleted file mode 100644 index 55b80d479eb..00000000000 --- a/arch/arm/mach-lh7a40x/include/mach/uncompress.h +++ /dev/null @@ -1,38 +0,0 @@ -/* arch/arm/mach-lh7a40x/include/mach/uncompress.h - * - * Copyright (C) 2004 Coastal Environmental Systems - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -#include - -#ifndef UART_R_DATA -# define UART_R_DATA (0x00) -#endif -#ifndef UART_R_STATUS -# define UART_R_STATUS (0x10) -#endif -#define nTxRdy (0x20) /* Not TxReady (literally Tx FIFO full) */ - - /* Access UART with physical addresses before MMU is setup */ -#define UART_STATUS (*(volatile unsigned long*) (UART2_PHYS + UART_R_STATUS)) -#define UART_DATA (*(volatile unsigned long*) (UART2_PHYS + UART_R_DATA)) - -static inline void putc(int ch) -{ - while (UART_STATUS & nTxRdy) - barrier(); - UART_DATA = ch; -} - -static inline void flush(void) -{ -} - - /* NULL functions; we don't presently need them */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/arch/arm/mach-lh7a40x/include/mach/vmalloc.h b/arch/arm/mach-lh7a40x/include/mach/vmalloc.h deleted file mode 100644 index d62da7358b1..00000000000 --- a/arch/arm/mach-lh7a40x/include/mach/vmalloc.h +++ /dev/null @@ -1,10 +0,0 @@ -/* arch/arm/mach-lh7a40x/include/mach/vmalloc.h - * - * Copyright (C) 2004 Coastal Environmental Systems - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ -#define VMALLOC_END (0xe8000000UL) diff --git a/arch/arm/mach-lh7a40x/irq-kev7a400.c b/arch/arm/mach-lh7a40x/irq-kev7a400.c deleted file mode 100644 index c7433b3c581..00000000000 --- a/arch/arm/mach-lh7a40x/irq-kev7a400.c +++ /dev/null @@ -1,93 +0,0 @@ -/* arch/arm/mach-lh7a40x/irq-kev7a400.c - * - * Copyright (C) 2004 Coastal Environmental Systems - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -#include -#include - -#include -#include -#include -#include - -#include "common.h" - - /* KEV7a400 CPLD IRQ handling */ - -static u16 CPLD_IRQ_mask; /* Mask for CPLD IRQs, 1 == unmasked */ - -static void -lh7a400_ack_cpld_irq (u32 irq) -{ - CPLD_CL_INT = 1 << (irq - IRQ_KEV7A400_CPLD); -} - -static void -lh7a400_mask_cpld_irq (u32 irq) -{ - CPLD_IRQ_mask &= ~(1 << (irq - IRQ_KEV7A400_CPLD)); - CPLD_WR_PB_INT_MASK = CPLD_IRQ_mask; -} - -static void -lh7a400_unmask_cpld_irq (u32 irq) -{ - CPLD_IRQ_mask |= 1 << (irq - IRQ_KEV7A400_CPLD); - CPLD_WR_PB_INT_MASK = CPLD_IRQ_mask; -} - -static struct -irq_chip lh7a400_cpld_chip = { - .name = "CPLD", - .ack = lh7a400_ack_cpld_irq, - .mask = lh7a400_mask_cpld_irq, - .unmask = lh7a400_unmask_cpld_irq, -}; - -static void -lh7a400_cpld_handler (unsigned int irq, struct irq_desc *desc) -{ - u32 mask = CPLD_LATCHED_INTS; - irq = IRQ_KEV_7A400_CPLD; - for (; mask; mask >>= 1, ++irq) { - if (mask & 1) - desc[irq].handle (irq, desc); - } -} - - /* IRQ initialization */ - -void __init -lh7a400_init_board_irq (void) -{ - int irq; - - for (irq = IRQ_KEV7A400_CPLD; - irq < IRQ_KEV7A400_CPLD + NR_IRQ_KEV7A400_CPLD; ++irq) { - set_irq_chip (irq, &lh7a400_cpld_chip); - set_irq_handler (irq, handle_edge_irq); - set_irq_flags (irq, IRQF_VALID); - } - set_irq_chained_handler (IRQ_CPLD, kev7a400_cpld_handler); - - /* Clear all CPLD interrupts */ - CPLD_CL_INT = 0xff; /* CPLD_INTR_MMC_CD | CPLD_INTR_ETH_INT; */ - - /* *** FIXME CF enabled in ide-probe.c */ - - GPIO_GPIOINTEN = 0; /* Disable all GPIO interrupts */ - barrier(); - GPIO_INTTYPE1 - = (GPIO_INTR_PCC1_CD | GPIO_INTR_PCC1_CD); /* Edge trig. */ - GPIO_INTTYPE2 = 0; /* Falling edge & low-level */ - GPIO_GPIOFEOI = 0xff; /* Clear all GPIO interrupts */ - GPIO_GPIOINTEN = 0xff; /* Enable all GPIO interrupts */ - - init_FIQ(); -} diff --git a/arch/arm/mach-lh7a40x/irq-lh7a400.c b/arch/arm/mach-lh7a40x/irq-lh7a400.c deleted file mode 100644 index f2e7e655ca3..00000000000 --- a/arch/arm/mach-lh7a40x/irq-lh7a400.c +++ /dev/null @@ -1,91 +0,0 @@ -/* arch/arm/mach-lh7a40x/irq-lh7a400.c - * - * Copyright (C) 2004 Coastal Environmental Systems - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -#include -#include -#include - -#include -#include -#include -#include - -#include "common.h" - - /* CPU IRQ handling */ - -static void lh7a400_mask_irq(struct irq_data *d) -{ - INTC_INTENC = (1 << d->irq); -} - -static void lh7a400_unmask_irq(struct irq_data *d) -{ - INTC_INTENS = (1 << d->irq); -} - -static void lh7a400_ack_gpio_irq(struct irq_data *d) -{ - GPIO_GPIOFEOI = (1 << IRQ_TO_GPIO (d->irq)); - INTC_INTENC = (1 << d->irq); -} - -static struct irq_chip lh7a400_internal_chip = { - .name = "MPU", - .irq_ack = lh7a400_mask_irq, /* Level triggering -> mask is ack */ - .irq_mask = lh7a400_mask_irq, - .irq_unmask = lh7a400_unmask_irq, -}; - -static struct irq_chip lh7a400_gpio_chip = { - .name = "GPIO", - .irq_ack = lh7a400_ack_gpio_irq, - .irq_mask = lh7a400_mask_irq, - .irq_unmask = lh7a400_unmask_irq, -}; - - - /* IRQ initialization */ - -void __init lh7a400_init_irq (void) -{ - int irq; - - INTC_INTENC = 0xffffffff; /* Disable all interrupts */ - GPIO_GPIOFINTEN = 0x00; /* Disable all GPIOF interrupts */ - barrier (); - - for (irq = 0; irq < NR_IRQS; ++irq) { - switch (irq) { - case IRQ_GPIO0INTR: - case IRQ_GPIO1INTR: - case IRQ_GPIO2INTR: - case IRQ_GPIO3INTR: - case IRQ_GPIO4INTR: - case IRQ_GPIO5INTR: - case IRQ_GPIO6INTR: - case IRQ_GPIO7INTR: - set_irq_chip (irq, &lh7a400_gpio_chip); - set_irq_handler (irq, handle_level_irq); /* OK default */ - break; - default: - set_irq_chip (irq, &lh7a400_internal_chip); - set_irq_handler (irq, handle_level_irq); - } - set_irq_flags (irq, IRQF_VALID); - } - - lh7a40x_init_board_irq (); - -/* *** FIXME: the LH7a400 does use FIQ interrupts in some cases. For - the time being, these are not initialized. */ - -/* init_FIQ(); */ -} diff --git a/arch/arm/mach-lh7a40x/irq-lh7a404.c b/arch/arm/mach-lh7a40x/irq-lh7a404.c deleted file mode 100644 index 14b17338957..00000000000 --- a/arch/arm/mach-lh7a40x/irq-lh7a404.c +++ /dev/null @@ -1,175 +0,0 @@ -/* arch/arm/mach-lh7a40x/irq-lh7a404.c - * - * Copyright (C) 2004 Logic Product Development - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -#include -#include -#include - -#include -#include -#include -#include - -#include "common.h" - -#define USE_PRIORITIES - -/* See Documentation/arm/Sharp-LH/VectoredInterruptController for more - * information on using the vectored interrupt controller's - * prioritizing feature. */ - -static unsigned char irq_pri_vic1[] = { -#if defined (USE_PRIORITIES) - IRQ_GPIO3INTR, /* CPLD */ - IRQ_DMAM2P4, IRQ_DMAM2P5, /* AC97 */ -#endif -}; -static unsigned char irq_pri_vic2[] = { -#if defined (USE_PRIORITIES) - IRQ_T3UI, /* Timer */ - IRQ_GPIO7INTR, /* CPLD */ - IRQ_UART1INTR, IRQ_UART2INTR, IRQ_UART3INTR, - IRQ_LCDINTR, /* LCD */ - IRQ_TSCINTR, /* ADC/Touchscreen */ -#endif -}; - - /* CPU IRQ handling */ - -static void lh7a404_vic1_mask_irq(struct irq_data *d) -{ - VIC1_INTENCLR = (1 << d->irq); -} - -static void lh7a404_vic1_unmask_irq(struct irq_data *d) -{ - VIC1_INTEN = (1 << d->irq); -} - -static void lh7a404_vic2_mask_irq(struct irq_data *d) -{ - VIC2_INTENCLR = (1 << (d->irq - 32)); -} - -static void lh7a404_vic2_unmask_irq(struct irq_data *d) -{ - VIC2_INTEN = (1 << (d->irq - 32)); -} - -static void lh7a404_vic1_ack_gpio_irq(struct irq_data *d) -{ - GPIO_GPIOFEOI = (1 << IRQ_TO_GPIO (d->irq)); - VIC1_INTENCLR = (1 << d->irq); -} - -static void lh7a404_vic2_ack_gpio_irq(struct irq_data *d) -{ - GPIO_GPIOFEOI = (1 << IRQ_TO_GPIO (d->irq)); - VIC2_INTENCLR = (1 << d->irq); -} - -static struct irq_chip lh7a404_vic1_chip = { - .name = "VIC1", - .irq_ack = lh7a404_vic1_mask_irq, /* Because level-triggered */ - .irq_mask = lh7a404_vic1_mask_irq, - .irq_unmask = lh7a404_vic1_unmask_irq, -}; - -static struct irq_chip lh7a404_vic2_chip = { - .name = "VIC2", - .irq_ack = lh7a404_vic2_mask_irq, /* Because level-triggered */ - .irq_mask = lh7a404_vic2_mask_irq, - .irq_unmask = lh7a404_vic2_unmask_irq, -}; - -static struct irq_chip lh7a404_gpio_vic1_chip = { - .name = "GPIO-VIC1", - .irq_ack = lh7a404_vic1_ack_gpio_irq, - .irq_mask = lh7a404_vic1_mask_irq, - .irq_unmask = lh7a404_vic1_unmask_irq, -}; - -static struct irq_chip lh7a404_gpio_vic2_chip = { - .name = "GPIO-VIC2", - .irq_ack = lh7a404_vic2_ack_gpio_irq, - .irq_mask = lh7a404_vic2_mask_irq, - .irq_unmask = lh7a404_vic2_unmask_irq, -}; - - /* IRQ initialization */ - -#if defined (CONFIG_ARCH_LH7A400) && defined (CONFIG_ARCH_LH7A404) -extern void* branch_irq_lh7a400; -#endif - -void __init lh7a404_init_irq (void) -{ - int irq; - -#if defined (CONFIG_ARCH_LH7A400) && defined (CONFIG_ARCH_LH7A404) -#define NOP 0xe1a00000 /* mov r0, r0 */ - branch_irq_lh7a400 = NOP; -#endif - - VIC1_INTENCLR = 0xffffffff; - VIC2_INTENCLR = 0xffffffff; - VIC1_INTSEL = 0; /* All IRQs */ - VIC2_INTSEL = 0; /* All IRQs */ - VIC1_NVADDR = VA_VIC1DEFAULT; - VIC2_NVADDR = VA_VIC2DEFAULT; - VIC1_VECTADDR = 0; - VIC2_VECTADDR = 0; - - GPIO_GPIOFINTEN = 0x00; /* Disable all GPIOF interrupts */ - barrier (); - - /* Install prioritized interrupts, if there are any. */ - /* The | 0x20*/ - for (irq = 0; irq < 16; ++irq) { - (&VIC1_VAD0)[irq] - = (irq < ARRAY_SIZE (irq_pri_vic1)) - ? (irq_pri_vic1[irq] | VA_VECTORED) : 0; - (&VIC1_VECTCNTL0)[irq] - = (irq < ARRAY_SIZE (irq_pri_vic1)) - ? (irq_pri_vic1[irq] | VIC_CNTL_ENABLE) : 0; - (&VIC2_VAD0)[irq] - = (irq < ARRAY_SIZE (irq_pri_vic2)) - ? (irq_pri_vic2[irq] | VA_VECTORED) : 0; - (&VIC2_VECTCNTL0)[irq] - = (irq < ARRAY_SIZE (irq_pri_vic2)) - ? (irq_pri_vic2[irq] | VIC_CNTL_ENABLE) : 0; - } - - for (irq = 0; irq < NR_IRQS; ++irq) { - switch (irq) { - case IRQ_GPIO0INTR: - case IRQ_GPIO1INTR: - case IRQ_GPIO2INTR: - case IRQ_GPIO3INTR: - case IRQ_GPIO4INTR: - case IRQ_GPIO5INTR: - case IRQ_GPIO6INTR: - case IRQ_GPIO7INTR: - set_irq_chip (irq, irq < 32 - ? &lh7a404_gpio_vic1_chip - : &lh7a404_gpio_vic2_chip); - set_irq_handler (irq, handle_level_irq); /* OK default */ - break; - default: - set_irq_chip (irq, irq < 32 - ? &lh7a404_vic1_chip - : &lh7a404_vic2_chip); - set_irq_handler (irq, handle_level_irq); - } - set_irq_flags (irq, IRQF_VALID); - } - - lh7a40x_init_board_irq (); -} diff --git a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c deleted file mode 100644 index 1bfdcddcb93..00000000000 --- a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c +++ /dev/null @@ -1,128 +0,0 @@ -/* arch/arm/mach-lh7a40x/irq-lpd7a40x.c - * - * Copyright (C) 2004 Coastal Environmental Systems - * Copyright (C) 2004 Logic Product Development - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -#include -#include -#include - -#include -#include -#include -#include - -#include "common.h" - -static void lh7a40x_ack_cpld_irq(struct irq_data *d) -{ - /* CPLD doesn't have ack capability */ -} - -static void lh7a40x_mask_cpld_irq(struct irq_data *d) -{ - switch (d->irq) { - case IRQ_LPD7A40X_ETH_INT: - CPLD_INTERRUPTS = CPLD_INTERRUPTS | 0x4; - break; - case IRQ_LPD7A400_TS: - CPLD_INTERRUPTS = CPLD_INTERRUPTS | 0x8; - break; - } -} - -static void lh7a40x_unmask_cpld_irq(struct irq_data *d) -{ - switch (d->irq) { - case IRQ_LPD7A40X_ETH_INT: - CPLD_INTERRUPTS = CPLD_INTERRUPTS & ~ 0x4; - break; - case IRQ_LPD7A400_TS: - CPLD_INTERRUPTS = CPLD_INTERRUPTS & ~ 0x8; - break; - } -} - -static struct irq_chip lh7a40x_cpld_chip = { - .name = "CPLD", - .irq_ack = lh7a40x_ack_cpld_irq, - .irq_mask = lh7a40x_mask_cpld_irq, - .irq_unmask = lh7a40x_unmask_cpld_irq, -}; - -static void lh7a40x_cpld_handler (unsigned int irq, struct irq_desc *desc) -{ - unsigned int mask = CPLD_INTERRUPTS; - - desc->irq_data.chip->ack (irq); - - if ((mask & 0x1) == 0) /* WLAN */ - generic_handle_irq(IRQ_LPD7A40X_ETH_INT); - - if ((mask & 0x2) == 0) /* Touch */ - generic_handle_irq(IRQ_LPD7A400_TS); - - desc->irq_data.chip->unmask (irq); /* Level-triggered need this */ -} - - - /* IRQ initialization */ - -void __init lh7a40x_init_board_irq (void) -{ - int irq; - - /* Rev A (v2.8): PF0, PF1, PF2, and PF3 are available IRQs. - PF7 supports the CPLD. - Rev B (v3.4): PF0, PF1, and PF2 are available IRQs. - PF3 supports the CPLD. - (Some) LPD7A404 prerelease boards report a version - number of 0x16, but we force an override since the - hardware is of the newer variety. - */ - - unsigned char cpld_version = CPLD_REVISION; - int pinCPLD; - -#if defined CONFIG_MACH_LPD7A404 - cpld_version = 0x34; /* Override, for now */ -#endif - pinCPLD = (cpld_version == 0x28) ? 7 : 3; - - /* First, configure user controlled GPIOF interrupts */ - - GPIO_PFDD &= ~0x0f; /* PF0-3 are inputs */ - GPIO_INTTYPE1 &= ~0x0f; /* PF0-3 are level triggered */ - GPIO_INTTYPE2 &= ~0x0f; /* PF0-3 are active low */ - barrier (); - GPIO_GPIOFINTEN |= 0x0f; /* Enable PF0, PF1, PF2, and PF3 IRQs */ - - /* Then, configure CPLD interrupt */ - - CPLD_INTERRUPTS = 0x0c; /* Disable all CPLD interrupts */ - GPIO_PFDD &= ~(1 << pinCPLD); /* Make input */ - GPIO_INTTYPE1 |= (1 << pinCPLD); /* Edge triggered */ - GPIO_INTTYPE2 &= ~(1 << pinCPLD); /* Active low */ - barrier (); - GPIO_GPIOFINTEN |= (1 << pinCPLD); /* Enable */ - - /* Cascade CPLD interrupts */ - - for (irq = IRQ_BOARD_START; - irq < IRQ_BOARD_START + NR_IRQ_BOARD; ++irq) { - set_irq_chip (irq, &lh7a40x_cpld_chip); - set_irq_handler (irq, handle_edge_irq); - set_irq_flags (irq, IRQF_VALID); - } - - set_irq_chained_handler ((cpld_version == 0x28) - ? IRQ_CPLD_V28 - : IRQ_CPLD_V34, - lh7a40x_cpld_handler); -} diff --git a/arch/arm/mach-lh7a40x/lcd-panel.h b/arch/arm/mach-lh7a40x/lcd-panel.h deleted file mode 100644 index a7f5027b2f7..00000000000 --- a/arch/arm/mach-lh7a40x/lcd-panel.h +++ /dev/null @@ -1,345 +0,0 @@ -/* lcd-panel.h - - written by Marc Singer - 18 Jul 2005 - - Copyright (C) 2005 Marc Singer - - ----------- - DESCRIPTION - ----------- - - Only one panel may be defined at a time. - - The pixel clock is calculated to be no greater than the target. - - Each timing value is accompanied by a specification comment. - - UNITS/MIN/TYP/MAX - - Most of the units will be in clocks. - - USE_RGB555 - - Define this macro to configure the AMBA LCD controller to use an - RGB555 encoding for the pels instead of the normal RGB565. - - LPD9520, LPD79524, LPD7A400, LPD7A404-10, LPD7A404-11 - - These boards are best approximated by 555 for all panels. Some - can use an extra low-order bit of blue in bit 16 of the color - value, but we don't have a way to communicate this non-linear - mapping to the kernel. - -*/ - -#if !defined (__LCD_PANEL_H__) -# define __LCD_PANEL_H__ - -#if defined (MACH_LPD79520)\ - || defined (MACH_LPD79524)\ - || defined (MACH_LPD7A400)\ - || defined (MACH_LPD7A404) -# define USE_RGB555 -#endif - -struct clcd_panel_extra { - unsigned int hrmode; - unsigned int clsen; - unsigned int spsen; - unsigned int pcdel; - unsigned int revdel; - unsigned int lpdel; - unsigned int spldel; - unsigned int pc2del; -}; - -#define NS_TO_CLOCK(ns,c) ((((ns)*((c)/1000) + (1000000 - 1))/1000000)) -#define CLOCK_TO_DIV(e,c) (((c) + (e) - 1)/(e)) - -#if defined CONFIG_FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT - - /* Logic Product Development LCD 3.5" QVGA HRTFT -10 */ - /* Sharp PN LQ035Q7DB02 w/HRTFT controller chip */ - -#define PIX_CLOCK_TARGET (6800000) -#define PIX_CLOCK_DIVIDER CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK) -#define PIX_CLOCK (HCLK/PIX_CLOCK_DIVIDER) - -static struct clcd_panel lcd_panel = { - .mode = { - .name = "3.5in QVGA (LQ035Q7DB02)", - .xres = 240, - .yres = 320, - .pixclock = PIX_CLOCK, - .left_margin = 16, - .right_margin = 21, - .upper_margin = 8, // line/8/8/8 - .lower_margin = 5, - .hsync_len = 61, - .vsync_len = NS_TO_CLOCK (60, PIX_CLOCK), - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_IPC | (PIX_CLOCK_DIVIDER - 2), - .cntl = CNTL_LCDTFT | CNTL_WATERMARK, - .bpp = 16, -}; - -#define HAS_LCD_PANEL_EXTRA - -static struct clcd_panel_extra lcd_panel_extra = { - .hrmode = 1, - .clsen = 1, - .spsen = 1, - .pcdel = 8, - .revdel = 7, - .lpdel = 13, - .spldel = 77, - .pc2del = 208, -}; - -#endif - -#if defined CONFIG_FB_ARMCLCD_SHARP_LQ057Q3DC02 - - /* Logic Product Development LCD 5.7" QVGA -10 */ - /* Sharp PN LQ057Q3DC02 */ - /* QVGA mode, V/Q=LOW */ - -/* From Sharp on 2006.1.3. I believe some of the values are incorrect - * based on the datasheet. - - Timing0 TIMING1 TIMING2 CONTROL - 0x140A0C4C 0x080504EF 0x013F380D 0x00000829 - HBP= 20 VBP= 8 BCD= 0 - HFP= 10 VFP= 5 CPL=319 - HSW= 12 VSW= 1 IOE= 0 - PPL= 19 LPP=239 IPC= 1 - IHS= 1 - IVS= 1 - ACB= 0 - CSEL= 0 - PCD= 13 - - */ - -/* The full horizontal cycle (Th) is clock/360/400/450. */ -/* The full vertical cycle (Tv) is line/251/262/280. */ - -#define PIX_CLOCK_TARGET (6300000) /* -/6.3/7 MHz */ -#define PIX_CLOCK_DIVIDER CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK) -#define PIX_CLOCK (HCLK/PIX_CLOCK_DIVIDER) - -static struct clcd_panel lcd_panel = { - .mode = { - .name = "5.7in QVGA (LQ057Q3DC02)", - .xres = 320, - .yres = 240, - .pixclock = PIX_CLOCK, - .left_margin = 11, - .right_margin = 400-11-320-2, - .upper_margin = 7, // line/7/7/7 - .lower_margin = 262-7-240-2, - .hsync_len = 2, // clk/2/96/200 - .vsync_len = 2, // line/2/-/34 - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_IHS | TIM2_IVS - | (PIX_CLOCK_DIVIDER - 2), - .cntl = CNTL_LCDTFT | CNTL_WATERMARK, - .bpp = 16, -}; - -#endif - -#if defined CONFIG_FB_ARMCLCD_SHARP_LQ64D343 - - /* Logic Product Development LCD 6.4" VGA -10 */ - /* Sharp PN LQ64D343 */ - -/* The full horizontal cycle (Th) is clock/750/800/900. */ -/* The full vertical cycle (Tv) is line/515/525/560. */ - -#define PIX_CLOCK_TARGET (28330000) -#define PIX_CLOCK_DIVIDER CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK) -#define PIX_CLOCK (HCLK/PIX_CLOCK_DIVIDER) - -static struct clcd_panel lcd_panel = { - .mode = { - .name = "6.4in QVGA (LQ64D343)", - .xres = 640, - .yres = 480, - .pixclock = PIX_CLOCK, - .left_margin = 32, - .right_margin = 800-32-640-96, - .upper_margin = 32, // line/34/34/34 - .lower_margin = 540-32-480-2, - .hsync_len = 96, // clk/2/96/200 - .vsync_len = 2, // line/2/-/34 - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_IHS | TIM2_IVS - | (PIX_CLOCK_DIVIDER - 2), - .cntl = CNTL_LCDTFT | CNTL_WATERMARK, - .bpp = 16, -}; - -#endif - -#if defined CONFIG_FB_ARMCLCD_SHARP_LQ10D368 - - /* Logic Product Development LCD 10.4" VGA -10 */ - /* Sharp PN LQ10D368 */ - -#define PIX_CLOCK_TARGET (28330000) -#define PIX_CLOCK_DIVIDER CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK) -#define PIX_CLOCK (HCLK/PIX_CLOCK_DIVIDER) - -static struct clcd_panel lcd_panel = { - .mode = { - .name = "10.4in VGA (LQ10D368)", - .xres = 640, - .yres = 480, - .pixclock = PIX_CLOCK, - .left_margin = 21, - .right_margin = 15, - .upper_margin = 34, - .lower_margin = 5, - .hsync_len = 96, - .vsync_len = 16, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_IHS | TIM2_IVS - | (PIX_CLOCK_DIVIDER - 2), - .cntl = CNTL_LCDTFT | CNTL_WATERMARK, - .bpp = 16, -}; - -#endif - -#if defined CONFIG_FB_ARMCLCD_SHARP_LQ121S1DG41 - - /* Logic Product Development LCD 12.1" SVGA -10 */ - /* Sharp PN LQ121S1DG41, was LQ121S1DG31 */ - -/* Note that with a 99993900 Hz HCLK, it is not possible to hit the - * target clock frequency range of 35MHz to 42MHz. */ - -/* If the target pixel clock is substantially lower than the panel - * spec, this is done to prevent the LCD display from glitching when - * the CPU is under load. A pixel clock higher than 25MHz - * (empirically determined) will compete with the CPU for bus cycles - * for the Ethernet chip. However, even a pixel clock of 10MHz - * competes with Compact Flash interface during some operations - * (fdisk, e2fsck). And, at that speed the display may have a visible - * flicker. */ - -/* The full horizontal cycle (Th) is clock/832/1056/1395. */ - -#define PIX_CLOCK_TARGET (20000000) -#define PIX_CLOCK_DIVIDER CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK) -#define PIX_CLOCK (HCLK/PIX_CLOCK_DIVIDER) - -static struct clcd_panel lcd_panel = { - .mode = { - .name = "12.1in SVGA (LQ121S1DG41)", - .xres = 800, - .yres = 600, - .pixclock = PIX_CLOCK, - .left_margin = 89, // ns/5/-/(1/PIX_CLOCK)-10 - .right_margin = 1056-800-89-128, - .upper_margin = 23, // line/23/23/23 - .lower_margin = 44, - .hsync_len = 128, // clk/2/128/200 - .vsync_len = 4, // line/2/4/6 - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_IHS | TIM2_IVS - | (PIX_CLOCK_DIVIDER - 2), - .cntl = CNTL_LCDTFT | CNTL_WATERMARK, - .bpp = 16, -}; - -#endif - -#if defined CONFIG_FB_ARMCLCD_HITACHI - - /* Hitachi*/ - /* Submitted by Michele Da Rold */ - -#define PIX_CLOCK_TARGET (49000000) -#define PIX_CLOCK_DIVIDER CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK) -#define PIX_CLOCK (HCLK/PIX_CLOCK_DIVIDER) - -static struct clcd_panel lcd_panel = { - .mode = { - .name = "Hitachi 800x480", - .xres = 800, - .yres = 480, - .pixclock = PIX_CLOCK, - .left_margin = 88, - .right_margin = 40, - .upper_margin = 32, - .lower_margin = 11, - .hsync_len = 128, - .vsync_len = 2, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_IPC | TIM2_IHS | TIM2_IVS - | (PIX_CLOCK_DIVIDER - 2), - .cntl = CNTL_LCDTFT | CNTL_WATERMARK, - .bpp = 16, -}; - -#endif - - -#if defined CONFIG_FB_ARMCLCD_AUO_A070VW01_WIDE - - /* AU Optotronics A070VW01 7.0 Wide Screen color Display*/ - /* Submitted by Michele Da Rold */ - -#define PIX_CLOCK_TARGET (10000000) -#define PIX_CLOCK_DIVIDER CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK) -#define PIX_CLOCK (HCLK/PIX_CLOCK_DIVIDER) - -static struct clcd_panel lcd_panel = { - .mode = { - .name = "7.0in Wide (A070VW01)", - .xres = 480, - .yres = 234, - .pixclock = PIX_CLOCK, - .left_margin = 30, - .right_margin = 25, - .upper_margin = 14, - .lower_margin = 12, - .hsync_len = 100, - .vsync_len = 1, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_IPC | TIM2_IHS | TIM2_IVS - | (PIX_CLOCK_DIVIDER - 2), - .cntl = CNTL_LCDTFT | CNTL_WATERMARK, - .bpp = 16, -}; - -#endif - -#undef NS_TO_CLOCK -#undef CLOCK_TO_DIV - -#endif /* __LCD_PANEL_H__ */ diff --git a/arch/arm/mach-lh7a40x/ssp-cpld.c b/arch/arm/mach-lh7a40x/ssp-cpld.c deleted file mode 100644 index 2901d49d148..00000000000 --- a/arch/arm/mach-lh7a40x/ssp-cpld.c +++ /dev/null @@ -1,343 +0,0 @@ -/* arch/arm/mach-lh7a40x/ssp-cpld.c - * - * Copyright (C) 2004,2005 Marc Singer - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * SSP/SPI driver for the CardEngine CPLD. - * - */ - -/* NOTES - ----- - - o *** This driver is cribbed from the 7952x implementation. - Some comments may not apply. - - o This driver contains sufficient logic to control either the - serial EEPROMs or the audio codec. It is included in the kernel - to support the codec. The EEPROMs are really the responsibility - of the boot loader and should probably be left alone. - - o The code must be augmented to cope with multiple, simultaneous - clients. - o The audio codec writes to the codec chip whenever playback - starts. - o The touchscreen driver writes to the ads chip every time it - samples. - o The audio codec must write 16 bits, but the touch chip writes - are 8 bits long. - o We need to be able to keep these configurations separate while - simultaneously active. - - */ - -#include -#include -//#include -#include -#include -//#include -#include -#include -#include -#include - -#include -#include - -#include - -//#define TALK - -#if defined (TALK) -#define PRINTK(f...) printk (f) -#else -#define PRINTK(f...) do {} while (0) -#endif - -#if defined (CONFIG_ARCH_LH7A400) -# define CPLD_SPID __REGP16(CPLD06_VIRT) /* SPI data */ -# define CPLD_SPIC __REGP16(CPLD08_VIRT) /* SPI control */ -# define CPLD_SPIC_CS_CODEC (1<<0) -# define CPLD_SPIC_CS_TOUCH (1<<1) -# define CPLD_SPIC_WRITE (0<<2) -# define CPLD_SPIC_READ (1<<2) -# define CPLD_SPIC_DONE (1<<3) /* r/o */ -# define CPLD_SPIC_LOAD (1<<4) -# define CPLD_SPIC_START (1<<4) -# define CPLD_SPIC_LOADED (1<<5) /* r/o */ -#endif - -#define CPLD_SPI __REGP16(CPLD0A_VIRT) /* SPI operation */ -#define CPLD_SPI_CS_EEPROM (1<<3) -#define CPLD_SPI_SCLK (1<<2) -#define CPLD_SPI_TX_SHIFT (1) -#define CPLD_SPI_TX (1< %2d", v & 0x1ff, (v >> 9) & 0x7f); -#endif - PRINTK ("\n"); - - if (ssp_configuration.device == DEVICE_CODEC) - select = CPLD_SPIC_CS_CODEC; - if (ssp_configuration.device == DEVICE_TOUCH) - select = CPLD_SPIC_CS_TOUCH; - if (cwrite) { - for (cwrite = (cwrite + 7)/8; cwrite-- > 0; ) { - CPLD_SPID = (v >> (8*cwrite)) & 0xff; - CPLD_SPIC = select | CPLD_SPIC_LOAD; - while (!(CPLD_SPIC & CPLD_SPIC_LOADED)) - ; - CPLD_SPIC = select; - while (!(CPLD_SPIC & CPLD_SPIC_DONE)) - ; - } - v = 0; - } - if (cread) { - mdelay (2); /* *** FIXME: required by ads7843? */ - v = 0; - for (cread = (cread + 7)/8; cread-- > 0;) { - CPLD_SPID = 0; - CPLD_SPIC = select | CPLD_SPIC_READ - | CPLD_SPIC_START; - while (!(CPLD_SPIC & CPLD_SPIC_LOADED)) - ; - CPLD_SPIC = select | CPLD_SPIC_READ; - while (!(CPLD_SPIC & CPLD_SPIC_DONE)) - ; - v = (v << 8) | CPLD_SPID; - } - } - return v; - } -#endif - - PRINTK ("spi(%d) 0x%04x -> 0x%x\r\n", ssp_configuration.device, - v & 0x1ff, (v >> 9) & 0x7f); - - enable_cs (); - - v <<= CPLD_SPI_TX_SHIFT; /* Correction for position of SPI_TX bit */ - while (cwrite--) { - CPLD_SPI - = (CPLD_SPI & ~CPLD_SPI_TX) - | ((v >> cwrite) & CPLD_SPI_TX); - udelay (T_DIS); - pulse_clock (); - } - - if (cread < 0) { - int delay = 10; - disable_cs (); - udelay (1); - enable_cs (); - - l = -1; - do { - if (CPLD_SPI & CPLD_SPI_RX) { - l = 0; - break; - } - } while (udelay (1), --delay); - } - else - /* We pulse the clock before the data to skip the leading zero. */ - while (cread-- > 0) { - pulse_clock (); - l = (l<<1) - | (((CPLD_SPI & CPLD_SPI_RX) - >> CPLD_SPI_RX_SHIFT) & 0x1); - } - - disable_cs (); - return l; -} - -static int ssp_init (void) -{ - spin_lock_init (&ssp_lock); - memset (&ssp_configuration, 0, sizeof (ssp_configuration)); - return 0; -} - - -/* ssp_chip_select - - drops the chip select line for the CPLD shift-register controlled - devices. It doesn't enable chip - -*/ - -static void ssp_chip_select (int enable) -{ -#if defined (CONFIG_MACH_LPD7A400) - int select; - - if (ssp_configuration.device == DEVICE_CODEC) - select = CPLD_SPIC_CS_CODEC; - else if (ssp_configuration.device == DEVICE_TOUCH) - select = CPLD_SPIC_CS_TOUCH; - else - return; - - if (enable) - CPLD_SPIC = select; - else - CPLD_SPIC = 0; -#endif -} - -static void ssp_acquire (void) -{ - spin_lock (&ssp_lock); -} - -static void ssp_release (void) -{ - ssp_chip_select (0); /* just in case */ - spin_unlock (&ssp_lock); -} - -static int ssp_configure (int device, int mode, int speed, - int frame_size_write, int frame_size_read) -{ - ssp_configuration.device = device; - ssp_configuration.mode = mode; - ssp_configuration.speed = speed; - ssp_configuration.frame_size_write = frame_size_write; - ssp_configuration.frame_size_read = frame_size_read; - - return 0; -} - -static int ssp_read (void) -{ - return execute_spi_command (0, 0, ssp_configuration.frame_size_read); -} - -static int ssp_write (u16 data) -{ - execute_spi_command (data, ssp_configuration.frame_size_write, 0); - return 0; -} - -static int ssp_write_read (u16 data) -{ - return execute_spi_command (data, ssp_configuration.frame_size_write, - ssp_configuration.frame_size_read); -} - -struct ssp_driver lh7a40x_cpld_ssp_driver = { - .init = ssp_init, - .acquire = ssp_acquire, - .release = ssp_release, - .configure = ssp_configure, - .chip_select = ssp_chip_select, - .read = ssp_read, - .write = ssp_write, - .write_read = ssp_write_read, -}; - - -MODULE_AUTHOR("Marc Singer"); -MODULE_DESCRIPTION("LPD7A40X CPLD SPI driver"); -MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-lh7a40x/time.c b/arch/arm/mach-lh7a40x/time.c deleted file mode 100644 index 4601e425bae..00000000000 --- a/arch/arm/mach-lh7a40x/time.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - * arch/arm/mach-lh7a40x/time.c - * - * Copyright (C) 2004 Logic Product Development - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include "common.h" - -#if HZ < 100 -# define TIMER_CONTROL TIMER_CONTROL2 -# define TIMER_LOAD TIMER_LOAD2 -# define TIMER_CONSTANT (508469/HZ) -# define TIMER_MODE (TIMER_C_ENABLE | TIMER_C_PERIODIC | TIMER_C_508KHZ) -# define TIMER_EOI TIMER_EOI2 -# define TIMER_IRQ IRQ_T2UI -#else -# define TIMER_CONTROL TIMER_CONTROL3 -# define TIMER_LOAD TIMER_LOAD3 -# define TIMER_CONSTANT (3686400/HZ) -# define TIMER_MODE (TIMER_C_ENABLE | TIMER_C_PERIODIC) -# define TIMER_EOI TIMER_EOI3 -# define TIMER_IRQ IRQ_T3UI -#endif - -static irqreturn_t -lh7a40x_timer_interrupt(int irq, void *dev_id) -{ - TIMER_EOI = 0; - timer_tick(); - - return IRQ_HANDLED; -} - -static struct irqaction lh7a40x_timer_irq = { - .name = "LHA740x Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = lh7a40x_timer_interrupt, -}; - -static void __init lh7a40x_timer_init (void) -{ - /* Stop/disable all timers */ - TIMER_CONTROL1 = 0; - TIMER_CONTROL2 = 0; - TIMER_CONTROL3 = 0; - - setup_irq (TIMER_IRQ, &lh7a40x_timer_irq); - - TIMER_LOAD = TIMER_CONSTANT; - TIMER_CONTROL = TIMER_MODE; -} - -struct sys_timer lh7a40x_timer = { - .init = &lh7a40x_timer_init, -}; -- cgit v1.2.3-18-g5258 From 28693ec01d0229b9e2a2ebe38ef8faa5e151b440 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 24 Jan 2011 20:55:22 +0100 Subject: OMAP: PM: SmartReflex: Add missing IS_ERR test Function _sr_lookup, defined in the same file, returns ERR_PTR not NULL in an error case. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @r@ identifier f; @@ f(...) { ... return ERR_PTR(...); } @@ identifier r.f, fld; expression x; statement S1,S2; @@ x = f(...) ... when != IS_ERR(x) ( if (IS_ERR(x) ||...) S1 else S2 | *x->fld ) // Signed-off-by: Julia Lawall Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/smartreflex.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 77ecebf3fae..d7deadfaddb 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -966,7 +966,7 @@ static int __devexit omap_sr_remove(struct platform_device *pdev) } sr_info = _sr_lookup(pdata->voltdm); - if (!sr_info) { + if (IS_ERR(sr_info)) { dev_warn(&pdev->dev, "%s: omap_sr struct not found\n", __func__); return -EINVAL; -- cgit v1.2.3-18-g5258 From 9c2c35848cf77cf8831442492a2f7a6d7723fe0a Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 24 Jan 2011 16:55:02 -0200 Subject: ARM: imx: Add initial support for IMX27IPCAM board Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/Kconfig | 9 ++++ arch/arm/mach-imx/Makefile | 1 + arch/arm/mach-imx/mach-imx27ipcam.c | 77 +++++++++++++++++++++++++++++ arch/arm/plat-mxc/include/mach/uncompress.h | 1 + 4 files changed, 88 insertions(+) create mode 100644 arch/arm/mach-imx/mach-imx27ipcam.c (limited to 'arch') diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 56684b51707..c1724185c24 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -300,4 +300,13 @@ config MACH_MXT_TD60 Include support for i-MXT (aka td60) platform. This includes specific configurations for the module and its peripherals. +config MACH_IMX27IPCAM + bool "IMX27 IPCAM platform" + select SOC_IMX27 + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_UART + help + Include support for IMX27 IPCAM platform. This includes specific + configurations for the board and its peripherals. + endif diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 77100bf2615..3e49ae0618a 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -36,3 +36,4 @@ obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o obj-$(CONFIG_MACH_PCA100) += mach-pca100.o obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o +obj-$(CONFIG_MACH_IMX27IPCAM) += mach-imx27ipcam.o diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c new file mode 100644 index 00000000000..d099ea60089 --- /dev/null +++ b/arch/arm/mach-imx/mach-imx27ipcam.c @@ -0,0 +1,77 @@ +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * + * Author: Fabio Estevam + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include + +#include "devices-imx27.h" + +static const int mx27ipcam_pins[] __initconst = { + /* UART1 */ + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + /* FEC */ + PD0_AIN_FEC_TXD0, + PD1_AIN_FEC_TXD1, + PD2_AIN_FEC_TXD2, + PD3_AIN_FEC_TXD3, + PD4_AOUT_FEC_RX_ER, + PD5_AOUT_FEC_RXD1, + PD6_AOUT_FEC_RXD2, + PD7_AOUT_FEC_RXD3, + PD8_AF_FEC_MDIO, + PD9_AIN_FEC_MDC, + PD10_AOUT_FEC_CRS, + PD11_AOUT_FEC_TX_CLK, + PD12_AOUT_FEC_RXD0, + PD13_AOUT_FEC_RX_DV, + PD14_AOUT_FEC_RX_CLK, + PD15_AOUT_FEC_COL, + PD16_AIN_FEC_TX_ER, + PF23_AIN_FEC_TX_EN, +}; + +static void __init mx27ipcam_init(void) +{ + mxc_gpio_setup_multiple_pins(mx27ipcam_pins, ARRAY_SIZE(mx27ipcam_pins), + "mx27ipcam"); + + imx27_add_imx_uart0(NULL); + imx27_add_fec(NULL); + imx27_add_imx2_wdt(NULL); +} + +static void __init mx27ipcam_timer_init(void) +{ + mx27_clocks_init(25000000); +} + +static struct sys_timer mx27ipcam_timer = { + .init = mx27ipcam_timer_init, +}; + +MACHINE_START(IMX27IPCAM, "Freescale IMX27IPCAM") + /* maintainer: Freescale Semiconductor, Inc. */ + .boot_params = MX27_PHYS_OFFSET + 0x100, + .map_io = mx27_map_io, + .init_irq = mx27_init_irq, + .init_machine = mx27ipcam_init, + .timer = &mx27ipcam_timer, +MACHINE_END diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h index 3a70ebf0477..2315541ac29 100644 --- a/arch/arm/plat-mxc/include/mach/uncompress.h +++ b/arch/arm/plat-mxc/include/mach/uncompress.h @@ -83,6 +83,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) case MACH_TYPE_MX21ADS: case MACH_TYPE_PCA100: case MACH_TYPE_MXT_TD60: + case MACH_TYPE_IMX27IPCAM: uart_base = MX2X_UART1_BASE_ADDR; break; case MACH_TYPE_MX31LITE: -- cgit v1.2.3-18-g5258 From cf3567aaad0304410e465a55313c8f0d25ef306d Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 11 Jan 2011 15:56:40 +0100 Subject: ARM MXS: Add auart platform support for i.MX28 Signed-off-by: Sascha Hauer --- arch/arm/mach-mxs/clock-mx28.c | 5 +++ arch/arm/mach-mxs/devices-mx28.h | 8 ++++ arch/arm/mach-mxs/devices/Kconfig | 3 ++ arch/arm/mach-mxs/devices/Makefile | 1 + arch/arm/mach-mxs/devices/platform-auart.c | 54 +++++++++++++++++++++++++ arch/arm/mach-mxs/include/mach/devices-common.h | 10 +++++ 6 files changed, 81 insertions(+) create mode 100644 arch/arm/mach-mxs/devices/platform-auart.c (limited to 'arch') diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index 56312c092a9..2f1a9904a4e 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -609,6 +609,11 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("duart", NULL, uart_clk) _REGISTER_CLOCK("imx28-fec.0", NULL, fec_clk) _REGISTER_CLOCK("imx28-fec.1", NULL, fec_clk) + _REGISTER_CLOCK("mxs-auart.0", NULL, uart_clk) + _REGISTER_CLOCK("mxs-auart.1", NULL, uart_clk) + _REGISTER_CLOCK("mxs-auart.2", NULL, uart_clk) + _REGISTER_CLOCK("mxs-auart.3", NULL, uart_clk) + _REGISTER_CLOCK("mxs-auart.4", NULL, uart_clk) _REGISTER_CLOCK("fec.0", NULL, fec_clk) _REGISTER_CLOCK("rtc", NULL, rtc_clk) _REGISTER_CLOCK("pll2", NULL, pll2_clk) diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h index 33773a6333a..1ab7bf0aa45 100644 --- a/arch/arm/mach-mxs/devices-mx28.h +++ b/arch/arm/mach-mxs/devices-mx28.h @@ -15,6 +15,14 @@ extern const struct amba_device mx28_duart_device __initconst; #define mx28_add_duart() \ mxs_add_duart(&mx28_duart_device) +extern const struct mxs_auart_data mx28_auart_data[] __initconst; +#define mx28_add_auart(id) mxs_add_auart(&mx28_auart_data[id]) +#define mx28_add_auart0() mx28_add_auart(0) +#define mx28_add_auart1() mx28_add_auart(1) +#define mx28_add_auart2() mx28_add_auart(2) +#define mx28_add_auart3() mx28_add_auart(3) +#define mx28_add_auart4() mx28_add_auart(4) + extern const struct mxs_fec_data mx28_fec_data[] __initconst; #define mx28_add_fec(id, pdata) \ mxs_add_fec(&mx28_fec_data[id], pdata) diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig index cf7dc1ae575..3001b754948 100644 --- a/arch/arm/mach-mxs/devices/Kconfig +++ b/arch/arm/mach-mxs/devices/Kconfig @@ -2,5 +2,8 @@ config MXS_HAVE_AMBA_DUART bool select ARM_AMBA +config MXS_HAVE_PLATFORM_AUART + bool + config MXS_HAVE_PLATFORM_FEC bool diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile index d0a09f6934b..c814d054bad 100644 --- a/arch/arm/mach-mxs/devices/Makefile +++ b/arch/arm/mach-mxs/devices/Makefile @@ -1,2 +1,3 @@ obj-$(CONFIG_MXS_HAVE_AMBA_DUART) += amba-duart.o +obj-$(CONFIG_MXS_HAVE_PLATFORM_AUART) += platform-auart.o obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o diff --git a/arch/arm/mach-mxs/devices/platform-auart.c b/arch/arm/mach-mxs/devices/platform-auart.c new file mode 100644 index 00000000000..f0dbf8a2145 --- /dev/null +++ b/arch/arm/mach-mxs/devices/platform-auart.c @@ -0,0 +1,54 @@ +/* + * Copyright (C) 2010 Pengutronix + * Sascha Hauer + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include +#include +#include + +#define mxs_auart_data_entry_single(soc, _id) \ + { \ + .id = _id, \ + .iobase = soc ## _AUART ## _id ## _BASE_ADDR, \ + .irq = soc ## _INT_AUART ## _id, \ + } + +#define mxs_auart_data_entry(soc, _id) \ + [_id] = mxs_auart_data_entry_single(soc, _id) + +#ifdef CONFIG_SOC_IMX28 +const struct mxs_auart_data mx28_auart_data[] __initconst = { +#define mx28_auart_data_entry(_id) \ + mxs_auart_data_entry(MX28, _id) + mx28_auart_data_entry(0), + mx28_auart_data_entry(1), + mx28_auart_data_entry(2), + mx28_auart_data_entry(3), + mx28_auart_data_entry(4), +}; +#endif + +struct platform_device *__init mxs_add_auart( + const struct mxs_auart_data *data) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + SZ_8K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return mxs_add_platform_device_dmamask("mxs-auart", data->id, + res, ARRAY_SIZE(res), NULL, 0, + DMA_BIT_MASK(32)); +} + diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h index 6c3d1a10343..bed40021e2c 100644 --- a/arch/arm/mach-mxs/include/mach/devices-common.h +++ b/arch/arm/mach-mxs/include/mach/devices-common.h @@ -30,6 +30,16 @@ int __init mxs_add_amba_device(const struct amba_device *dev); /* duart */ int __init mxs_add_duart(const struct amba_device *dev); +/* auart */ +struct mxs_auart_data { + int id; + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irq; +}; +struct platform_device *__init mxs_add_auart( + const struct mxs_auart_data *data); + /* fec */ #include struct mxs_fec_data { -- cgit v1.2.3-18-g5258 From 19df0c2fef010e94e90df514aaf4e73f6b80145c Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 25 Jan 2011 14:26:50 +0100 Subject: percpu: align percpu readmostly subsection to cacheline Currently percpu readmostly subsection may share cachelines with other percpu subsections which may result in unnecessary cacheline bounce and performance degradation. This patch adds @cacheline parameter to PERCPU() and PERCPU_VADDR() linker macros, makes each arch linker scripts specify its cacheline size and use it to align percpu subsections. This is based on Shaohua's x86 only patch. Signed-off-by: Tejun Heo Cc: Shaohua Li --- arch/alpha/kernel/vmlinux.lds.S | 2 +- arch/arm/kernel/vmlinux.lds.S | 2 +- arch/blackfin/kernel/vmlinux.lds.S | 2 +- arch/cris/kernel/vmlinux.lds.S | 2 +- arch/frv/kernel/vmlinux.lds.S | 2 +- arch/ia64/kernel/vmlinux.lds.S | 2 +- arch/m32r/kernel/vmlinux.lds.S | 2 +- arch/mips/kernel/vmlinux.lds.S | 2 +- arch/mn10300/kernel/vmlinux.lds.S | 2 +- arch/parisc/kernel/vmlinux.lds.S | 2 +- arch/powerpc/kernel/vmlinux.lds.S | 2 +- arch/s390/kernel/vmlinux.lds.S | 2 +- arch/sh/kernel/vmlinux.lds.S | 2 +- arch/sparc/kernel/vmlinux.lds.S | 2 +- arch/tile/kernel/vmlinux.lds.S | 2 +- arch/um/include/asm/common.lds.S | 2 +- arch/x86/kernel/vmlinux.lds.S | 4 ++-- arch/xtensa/kernel/vmlinux.lds.S | 2 +- 18 files changed, 19 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/alpha/kernel/vmlinux.lds.S b/arch/alpha/kernel/vmlinux.lds.S index 003ef4c0258..173518f8c8b 100644 --- a/arch/alpha/kernel/vmlinux.lds.S +++ b/arch/alpha/kernel/vmlinux.lds.S @@ -38,7 +38,7 @@ SECTIONS __init_begin = ALIGN(PAGE_SIZE); INIT_TEXT_SECTION(PAGE_SIZE) INIT_DATA_SECTION(16) - PERCPU(PAGE_SIZE) + PERCPU(64, PAGE_SIZE) /* Align to THREAD_SIZE rather than PAGE_SIZE here so any padding page needed for the THREAD_SIZE aligned init_task gets freed after init */ . = ALIGN(THREAD_SIZE); diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 86b66f3f203..cf78a03bf81 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -70,7 +70,7 @@ SECTIONS #endif } - PERCPU(PAGE_SIZE) + PERCPU(32, PAGE_SIZE) #ifndef CONFIG_XIP_KERNEL . = ALIGN(PAGE_SIZE); diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S index 4122678529c..c40d07f708e 100644 --- a/arch/blackfin/kernel/vmlinux.lds.S +++ b/arch/blackfin/kernel/vmlinux.lds.S @@ -136,7 +136,7 @@ SECTIONS . = ALIGN(16); INIT_DATA_SECTION(16) - PERCPU(4) + PERCPU(32, 4) .exit.data : { diff --git a/arch/cris/kernel/vmlinux.lds.S b/arch/cris/kernel/vmlinux.lds.S index 442218980db..c62e1346f47 100644 --- a/arch/cris/kernel/vmlinux.lds.S +++ b/arch/cris/kernel/vmlinux.lds.S @@ -107,7 +107,7 @@ SECTIONS #endif __vmlinux_end = .; /* Last address of the physical file. */ #ifdef CONFIG_ETRAX_ARCH_V32 - PERCPU(PAGE_SIZE) + PERCPU(32, PAGE_SIZE) .init.ramfs : { INIT_RAM_FS diff --git a/arch/frv/kernel/vmlinux.lds.S b/arch/frv/kernel/vmlinux.lds.S index 8b973f3cc90..0daae8af578 100644 --- a/arch/frv/kernel/vmlinux.lds.S +++ b/arch/frv/kernel/vmlinux.lds.S @@ -37,7 +37,7 @@ SECTIONS _einittext = .; INIT_DATA_SECTION(8) - PERCPU(4096) + PERCPU(L1_CACHE_BYTES, 4096) . = ALIGN(PAGE_SIZE); __init_end = .; diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S index 5a4d044dcb1..787de4a77d8 100644 --- a/arch/ia64/kernel/vmlinux.lds.S +++ b/arch/ia64/kernel/vmlinux.lds.S @@ -198,7 +198,7 @@ SECTIONS { /* Per-cpu data: */ . = ALIGN(PERCPU_PAGE_SIZE); - PERCPU_VADDR(PERCPU_ADDR, :percpu) + PERCPU_VADDR(SMP_CACHE_BYTES, PERCPU_ADDR, :percpu) __phys_per_cpu_start = __per_cpu_load; /* * ensure percpu data fits diff --git a/arch/m32r/kernel/vmlinux.lds.S b/arch/m32r/kernel/vmlinux.lds.S index 7da94eaa082..c194d64cdbb 100644 --- a/arch/m32r/kernel/vmlinux.lds.S +++ b/arch/m32r/kernel/vmlinux.lds.S @@ -53,7 +53,7 @@ SECTIONS __init_begin = .; INIT_TEXT_SECTION(PAGE_SIZE) INIT_DATA_SECTION(16) - PERCPU(PAGE_SIZE) + PERCPU(32, PAGE_SIZE) . = ALIGN(PAGE_SIZE); __init_end = .; /* freed after init ends here */ diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index 570607b376b..832afbb8758 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -115,7 +115,7 @@ SECTIONS EXIT_DATA } - PERCPU(PAGE_SIZE) + PERCPU(1 << CONFIG_MIPS_L1_CACHE_SHIFT, PAGE_SIZE) . = ALIGN(PAGE_SIZE); __init_end = .; /* freed after init ends here */ diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S index febbeee7f2f..968bcd2cb02 100644 --- a/arch/mn10300/kernel/vmlinux.lds.S +++ b/arch/mn10300/kernel/vmlinux.lds.S @@ -70,7 +70,7 @@ SECTIONS .exit.text : { EXIT_TEXT; } .exit.data : { EXIT_DATA; } - PERCPU(PAGE_SIZE) + PERCPU(32, PAGE_SIZE) . = ALIGN(PAGE_SIZE); __init_end = .; /* freed after init ends here */ diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S index d64a6bbec2a..8f1e4efd143 100644 --- a/arch/parisc/kernel/vmlinux.lds.S +++ b/arch/parisc/kernel/vmlinux.lds.S @@ -145,7 +145,7 @@ SECTIONS EXIT_DATA } - PERCPU(PAGE_SIZE) + PERCPU(L1_CACHE_BYTES, PAGE_SIZE) . = ALIGN(PAGE_SIZE); __init_end = .; /* freed after init ends here */ diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index 8a0deefac08..b9150f07d26 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -160,7 +160,7 @@ SECTIONS INIT_RAM_FS } - PERCPU(PAGE_SIZE) + PERCPU(L1_CACHE_BYTES, PAGE_SIZE) . = ALIGN(8); .machine.desc : AT(ADDR(.machine.desc) - LOAD_OFFSET) { diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S index a68ac10213b..1bc18cdb525 100644 --- a/arch/s390/kernel/vmlinux.lds.S +++ b/arch/s390/kernel/vmlinux.lds.S @@ -77,7 +77,7 @@ SECTIONS . = ALIGN(PAGE_SIZE); INIT_DATA_SECTION(0x100) - PERCPU(PAGE_SIZE) + PERCPU(0x100, PAGE_SIZE) . = ALIGN(PAGE_SIZE); __init_end = .; /* freed after init ends here */ diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S index 7f8a709c3ad..af4d46187a7 100644 --- a/arch/sh/kernel/vmlinux.lds.S +++ b/arch/sh/kernel/vmlinux.lds.S @@ -66,7 +66,7 @@ SECTIONS __machvec_end = .; } - PERCPU(PAGE_SIZE) + PERCPU(L1_CACHE_BYTES, PAGE_SIZE) /* * .exit.text is discarded at runtime, not link time, to deal with diff --git a/arch/sparc/kernel/vmlinux.lds.S b/arch/sparc/kernel/vmlinux.lds.S index 0c1e6783657..92b557afe53 100644 --- a/arch/sparc/kernel/vmlinux.lds.S +++ b/arch/sparc/kernel/vmlinux.lds.S @@ -108,7 +108,7 @@ SECTIONS __sun4v_2insn_patch_end = .; } - PERCPU(PAGE_SIZE) + PERCPU(SMP_CACHE_BYTES, PAGE_SIZE) . = ALIGN(PAGE_SIZE); __init_end = .; diff --git a/arch/tile/kernel/vmlinux.lds.S b/arch/tile/kernel/vmlinux.lds.S index 25fdc0c1839..c6ce378e067 100644 --- a/arch/tile/kernel/vmlinux.lds.S +++ b/arch/tile/kernel/vmlinux.lds.S @@ -63,7 +63,7 @@ SECTIONS *(.init.page) } :data =0 INIT_DATA_SECTION(16) - PERCPU(PAGE_SIZE) + PERCPU(L2_CACHE_BYTES, PAGE_SIZE) . = ALIGN(PAGE_SIZE); VMLINUX_SYMBOL(_einitdata) = .; diff --git a/arch/um/include/asm/common.lds.S b/arch/um/include/asm/common.lds.S index ac55b9efa1c..34bede8aad4 100644 --- a/arch/um/include/asm/common.lds.S +++ b/arch/um/include/asm/common.lds.S @@ -42,7 +42,7 @@ INIT_SETUP(0) } - PERCPU(32) + PERCPU(32, 32) .initcall.init : { INIT_CALLS diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S index bf470075518..cef446f8ac7 100644 --- a/arch/x86/kernel/vmlinux.lds.S +++ b/arch/x86/kernel/vmlinux.lds.S @@ -230,7 +230,7 @@ SECTIONS * output PHDR, so the next output section - .init.text - should * start another segment - init. */ - PERCPU_VADDR(0, :percpu) + PERCPU_VADDR(INTERNODE_CACHE_BYTES, 0, :percpu) #endif INIT_TEXT_SECTION(PAGE_SIZE) @@ -305,7 +305,7 @@ SECTIONS } #if !defined(CONFIG_X86_64) || !defined(CONFIG_SMP) - PERCPU(THREAD_SIZE) + PERCPU(INTERNODE_CACHE_BYTES, THREAD_SIZE) #endif . = ALIGN(PAGE_SIZE); diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S index 9b526154c9b..a2820065927 100644 --- a/arch/xtensa/kernel/vmlinux.lds.S +++ b/arch/xtensa/kernel/vmlinux.lds.S @@ -155,7 +155,7 @@ SECTIONS INIT_RAM_FS } - PERCPU(PAGE_SIZE) + PERCPU(XCHAL_ICACHE_LINESIZE, PAGE_SIZE) /* We need this dummy segment here */ -- cgit v1.2.3-18-g5258 From 0f06c063628689de5eab5dfb3ce9c797a09db900 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 25 Jan 2011 14:27:38 +0100 Subject: alpha: use L1_CACHE_BYTES for cacheline size in the linker script Currently the linker script uses 64 for cacheline size which isn't optimal for all cases. Include asm/cache.h and use L1_CACHE_BYTES instead as suggested by Sam Ravnborg. Signed-off-by: Tejun Heo Cc: Sam Ravnborg --- arch/alpha/kernel/vmlinux.lds.S | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/alpha/kernel/vmlinux.lds.S b/arch/alpha/kernel/vmlinux.lds.S index 173518f8c8b..433be2a24f3 100644 --- a/arch/alpha/kernel/vmlinux.lds.S +++ b/arch/alpha/kernel/vmlinux.lds.S @@ -1,5 +1,6 @@ #include #include +#include #include OUTPUT_FORMAT("elf64-alpha") @@ -38,7 +39,7 @@ SECTIONS __init_begin = ALIGN(PAGE_SIZE); INIT_TEXT_SECTION(PAGE_SIZE) INIT_DATA_SECTION(16) - PERCPU(64, PAGE_SIZE) + PERCPU(L1_CACHE_BYTES, PAGE_SIZE) /* Align to THREAD_SIZE rather than PAGE_SIZE here so any padding page needed for the THREAD_SIZE aligned init_task gets freed after init */ . = ALIGN(THREAD_SIZE); @@ -46,7 +47,7 @@ SECTIONS /* Freed after init ends here */ _data = .; - RW_DATA_SECTION(64, PAGE_SIZE, THREAD_SIZE) + RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE) .got : { *(.got) -- cgit v1.2.3-18-g5258 From f45b1149911cc4c3ab50e56c8844ad4ec04a4575 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Tue, 11 Jan 2011 04:01:08 +0100 Subject: ARM: 6617/1: mmc, Add zboot from MMC support for SuperH Mobile ARM This allows a ROM-able zImage to be written to MMC and for SuperH Mobile ARM to boot directly from the MMCIF hardware block. This is achieved by the MaskROM loading the first portion of the image into MERAM and then jumping to it. This portion contains loader code which copies the entire image to SDRAM and jumps to it. From there the zImage boot code proceeds as normal, uncompressing the image into its final location and then jumping to it. Cc: Magnus Damm Russell, please consider merging this for 2.6.38. This patch depends on: * "mmc, sh: Move MMCIF_PROGRESS_* into sh_mmcif.h" which will be merged though Paul Mundt's rmobile sh-2.6. The absence of this patch will break the build if the (new) CONFIG_ZBOOT_ROM_MMCIF option is set. There are no subtle side-effects. v2: Addressed comments by Magnus Damm * Fix copyright in vrl4.c * Fix use of #define CONFIG_ZBOOT_ROM_MMCIF in mmcif-sh7372.c * Initialise LED GPIO lines in head-ap4evb.txt instead of mmcif-sh7372.c as this is considered board-specific. v3: Addressed comments made in person by Magnus Damm * Move mmcif_loader to be earlier in the image and reduce the number of blocks of boot program loaded by the MaskRom from 40 to 8 accordingly. * Move LED GPIO initialisation into mmcif_progress_init - This leaves the partner jet script unbloated Other * inline mmcif_update_progress so it is a static inline in a header file v4: * Use htole16() and htole32() in v4rl.c to ensure that the output is little endian v5: Addressed comments by Russell King * Simplify assembly code * Jump to code rather than an address <- bug fix * Use (void __iomem *) as appropriate Roll in mackerel support * This was previously a separate patch, only because of the order in which this code was developed Signed-off-by: Simon Horman Signed-off-by: Russell King --- arch/arm/Kconfig | 12 +++ arch/arm/boot/compressed/Makefile | 13 +++- arch/arm/boot/compressed/head-shmobile.S | 30 ++++++++ arch/arm/boot/compressed/mmcif-sh7372.c | 87 ++++++++++++++++++++++ arch/arm/mach-shmobile/include/mach/mmcif-ap4eb.h | 29 ++++++++ .../mach-shmobile/include/mach/mmcif-mackerel.h | 39 ++++++++++ arch/arm/mach-shmobile/include/mach/mmcif.h | 18 +++++ 7 files changed, 227 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/compressed/mmcif-sh7372.c create mode 100644 arch/arm/mach-shmobile/include/mach/mmcif-ap4eb.h create mode 100644 arch/arm/mach-shmobile/include/mach/mmcif-mackerel.h create mode 100644 arch/arm/mach-shmobile/include/mach/mmcif.h (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5cff165b7eb..2d0a1dc1599 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1619,6 +1619,18 @@ config ZBOOT_ROM Say Y here if you intend to execute your compressed kernel image (zImage) directly from ROM or flash. If unsure, say N. +config ZBOOT_ROM_MMCIF + bool "Include MMCIF loader in zImage (EXPERIMENTAL)" + depends on ZBOOT_ROM && ARCH_SH7372 && EXPERIMENTAL + help + Say Y here to include experimental MMCIF loading code in the + ROM-able zImage. With this enabled it is possible to write the + the ROM-able zImage kernel image to an MMC card and boot the + kernel straight from the reset vector. At reset the processor + Mask ROM will load the first part of the the ROM-able zImage + which in turn loads the rest the kernel image to RAM using the + MMCIF hardware block. + config CMDLINE string "Default kernel command string" default "" diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 0a8f748e506..198007d0a7e 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -4,9 +4,20 @@ # create a compressed vmlinuz image from the original vmlinux # +OBJS = + +# Ensure that mmcif loader code appears early in the image +# to minimise that number of bocks that have to be read in +# order to load it. +ifeq ($(CONFIG_ZBOOT_ROM_MMCIF),y) +ifeq ($(CONFIG_ARCH_SH7372),y) +OBJS += mmcif-sh7372.o +endif +endif + AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET) HEAD = head.o -OBJS = misc.o decompress.o +OBJS += misc.o decompress.o FONTC = $(srctree)/drivers/video/console/font_acorn_8x8.c # diff --git a/arch/arm/boot/compressed/head-shmobile.S b/arch/arm/boot/compressed/head-shmobile.S index 30973b76e6a..c943d2e7da9 100644 --- a/arch/arm/boot/compressed/head-shmobile.S +++ b/arch/arm/boot/compressed/head-shmobile.S @@ -25,6 +25,36 @@ /* load board-specific initialization code */ #include +#ifdef CONFIG_ZBOOT_ROM_MMCIF + /* Load image from MMC */ + adr sp, __tmp_stack + 128 + ldr r0, __image_start + ldr r1, __image_end + subs r1, r1, r0 + ldr r0, __load_base + bl mmcif_loader + + /* Jump to loaded code */ + ldr r0, __loaded + ldr r1, __image_start + sub r0, r0, r1 + ldr r1, __load_base + add pc, r0, r1 + +__image_start: + .long _start +__image_end: + .long _got_end +__load_base: + .long CONFIG_MEMORY_START + 0x02000000 @ Load at 32Mb into SDRAM +__loaded: + .long __continue + .align +__tmp_stack: + .space 128 +__continue: +#endif /* CONFIG_ZBOOT_ROM_MMCIF */ + b 1f __atags:@ tag #1 .long 12 @ tag->hdr.size = tag_size(tag_core); diff --git a/arch/arm/boot/compressed/mmcif-sh7372.c b/arch/arm/boot/compressed/mmcif-sh7372.c new file mode 100644 index 00000000000..e6180af241f --- /dev/null +++ b/arch/arm/boot/compressed/mmcif-sh7372.c @@ -0,0 +1,87 @@ +/* + * sh7372 MMCIF loader + * + * Copyright (C) 2010 Magnus Damm + * Copyright (C) 2010 Simon Horman + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include + +#define MMCIF_BASE (void __iomem *)0xe6bd0000 + +#define PORT84CR (void __iomem *)0xe6050054 +#define PORT85CR (void __iomem *)0xe6050055 +#define PORT86CR (void __iomem *)0xe6050056 +#define PORT87CR (void __iomem *)0xe6050057 +#define PORT88CR (void __iomem *)0xe6050058 +#define PORT89CR (void __iomem *)0xe6050059 +#define PORT90CR (void __iomem *)0xe605005a +#define PORT91CR (void __iomem *)0xe605005b +#define PORT92CR (void __iomem *)0xe605005c +#define PORT99CR (void __iomem *)0xe6050063 + +#define SMSTPCR3 (void __iomem *)0xe615013c + +/* SH7372 specific MMCIF loader + * + * loads the zImage from an MMC card starting from block 1. + * + * The image must be start with a vrl4 header and + * the zImage must start at offset 512 of the image. That is, + * at block 2 (=byte 1024) on the media + * + * Use the following line to write the vrl4 formated zImage + * to an MMC card + * # dd if=vrl4.out of=/dev/sdx bs=512 seek=1 + */ +asmlinkage void mmcif_loader(unsigned char *buf, unsigned long len) +{ + mmcif_init_progress(); + mmcif_update_progress(MMCIF_PROGRESS_ENTER); + + /* Initialise MMC + * registers: PORT84CR-PORT92CR + * (MMCD0_0-MMCD0_7,MMCCMD0 Control) + * value: 0x04 - select function 4 + */ + __raw_writeb(0x04, PORT84CR); + __raw_writeb(0x04, PORT85CR); + __raw_writeb(0x04, PORT86CR); + __raw_writeb(0x04, PORT87CR); + __raw_writeb(0x04, PORT88CR); + __raw_writeb(0x04, PORT89CR); + __raw_writeb(0x04, PORT90CR); + __raw_writeb(0x04, PORT91CR); + __raw_writeb(0x04, PORT92CR); + + /* Initialise MMC + * registers: PORT99CR (MMCCLK0 Control) + * value: 0x10 | 0x04 - enable output | select function 4 + */ + __raw_writeb(0x14, PORT99CR); + + /* Enable clock to MMC hardware block */ + __raw_writel(__raw_readl(SMSTPCR3) & ~(1 << 12), SMSTPCR3); + + mmcif_update_progress(MMCIF_PROGRESS_INIT); + + /* setup MMCIF hardware */ + sh_mmcif_boot_init(MMCIF_BASE); + + mmcif_update_progress(MMCIF_PROGRESS_LOAD); + + /* load kernel via MMCIF interface */ + sh_mmcif_boot_do_read(MMCIF_BASE, 2, /* Kernel is at block 2 */ + (len + SH_MMCIF_BBS - 1) / SH_MMCIF_BBS, buf); + + + /* Disable clock to MMC hardware block */ + __raw_writel(__raw_readl(SMSTPCR3) & (1 << 12), SMSTPCR3); + + mmcif_update_progress(MMCIF_PROGRESS_DONE); +} diff --git a/arch/arm/mach-shmobile/include/mach/mmcif-ap4eb.h b/arch/arm/mach-shmobile/include/mach/mmcif-ap4eb.h new file mode 100644 index 00000000000..a8d02be8d2b --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/mmcif-ap4eb.h @@ -0,0 +1,29 @@ +#ifndef MMCIF_AP4EB_H +#define MMCIF_AP4EB_H + +#define PORT185CR (void __iomem *)0xe60520b9 +#define PORT186CR (void __iomem *)0xe60520ba +#define PORT187CR (void __iomem *)0xe60520bb +#define PORT188CR (void __iomem *)0xe60520bc + +#define PORTR191_160DR (void __iomem *)0xe6056014 + +static inline void mmcif_init_progress(void) +{ + /* Initialise LEDS1-4 + * registers: PORT185CR-PORT188CR (LED1-LED4 Control) + * value: 0x10 - enable output + */ + __raw_writeb(0x10, PORT185CR); + __raw_writeb(0x10, PORT186CR); + __raw_writeb(0x10, PORT187CR); + __raw_writeb(0x10, PORT188CR); +} + +static inline void mmcif_update_progress(int n) +{ + __raw_writel((__raw_readl(PORTR191_160DR) & ~(0xf << 25)) | + (1 << (25 + n)), PORTR191_160DR); +} + +#endif /* MMCIF_AP4EB_H */ diff --git a/arch/arm/mach-shmobile/include/mach/mmcif-mackerel.h b/arch/arm/mach-shmobile/include/mach/mmcif-mackerel.h new file mode 100644 index 00000000000..4b4f6949a86 --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/mmcif-mackerel.h @@ -0,0 +1,39 @@ +#ifndef MMCIF_MACKEREL_H +#define MMCIF_MACKEREL_H + +#define PORT0CR (void __iomem *)0xe6051000 +#define PORT1CR (void __iomem *)0xe6051001 +#define PORT2CR (void __iomem *)0xe6051002 +#define PORT159CR (void __iomem *)0xe605009f + +#define PORTR031_000DR (void __iomem *)0xe6055000 +#define PORTL159_128DR (void __iomem *)0xe6054010 + +static inline void mmcif_init_progress(void) +{ + /* Initialise LEDS0-3 + * registers: PORT0CR-PORT2CR,PORT159CR (LED0-LED3 Control) + * value: 0x10 - enable output + */ + __raw_writeb(0x10, PORT0CR); + __raw_writeb(0x10, PORT1CR); + __raw_writeb(0x10, PORT2CR); + __raw_writeb(0x10, PORT159CR); +} + +static inline void mmcif_update_progress(int n) +{ + unsigned a = 0, b = 0; + + if (n < 3) + a = 1 << n; + else + b = 1 << 31; + + __raw_writel((__raw_readl(PORTR031_000DR) & ~0x7) | a, + PORTR031_000DR); + __raw_writel((__raw_readl(PORTL159_128DR) & ~(1 << 31)) | b, + PORTL159_128DR); +} + +#endif /* MMCIF_MACKEREL_H */ diff --git a/arch/arm/mach-shmobile/include/mach/mmcif.h b/arch/arm/mach-shmobile/include/mach/mmcif.h new file mode 100644 index 00000000000..f4dc3279cf0 --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/mmcif.h @@ -0,0 +1,18 @@ +#ifndef MMCIF_H +#define MMCIF_H + +/************************************************** + * + * board specific settings + * + **************************************************/ + +#ifdef CONFIG_MACH_AP4EVB +#include "mach/mmcif-ap4eb.h" +#elif CONFIG_MACH_MACKEREL +#include "mach/mmcif-mackerel.h" +#else +#error "unsupported board." +#endif + +#endif /* MMCIF_H */ -- cgit v1.2.3-18-g5258 From 21f47fbc5b18da4a3db680959aee887612ec9a72 Mon Sep 17 00:00:00 2001 From: Alexey Charkov Date: Thu, 23 Dec 2010 13:11:21 +0100 Subject: ARM: 6597/1: Add basic architecture support for VIA/WonderMedia 85xx SoC's This adds support for the family of Systems-on-Chip produced initially by VIA and now its subsidiary WonderMedia that have recently become widespread in lower-end Chinese ARM-based tablets and netbooks. Support is included for both VT8500 and WM8505, selectable by a configuration switch at kernel build time. Included are basic machine initialization files, register and interrupt definitions, support for the on-chip interrupt controller, high-precision OS timer, GPIO lines, necessary macros for early debug, pulse-width-modulated outputs control, as well as platform device configurations for the specific drivers implemented elsewhere. Signed-off-by: Alexey Charkov Signed-off-by: Russell King --- arch/arm/Kconfig | 12 ++ arch/arm/Makefile | 1 + arch/arm/boot/compressed/Makefile | 4 + arch/arm/boot/compressed/head-vt8500.S | 46 ++++ arch/arm/mach-vt8500/Kconfig | 73 +++++++ arch/arm/mach-vt8500/Makefile | 9 + arch/arm/mach-vt8500/Makefile.boot | 3 + arch/arm/mach-vt8500/bv07.c | 77 +++++++ arch/arm/mach-vt8500/devices-vt8500.c | 91 ++++++++ arch/arm/mach-vt8500/devices-wm8505.c | 99 +++++++++ arch/arm/mach-vt8500/devices.c | 270 ++++++++++++++++++++++++ arch/arm/mach-vt8500/devices.h | 88 ++++++++ arch/arm/mach-vt8500/gpio.c | 240 +++++++++++++++++++++ arch/arm/mach-vt8500/include/mach/debug-macro.S | 31 +++ arch/arm/mach-vt8500/include/mach/entry-macro.S | 32 +++ arch/arm/mach-vt8500/include/mach/gpio.h | 6 + arch/arm/mach-vt8500/include/mach/hardware.h | 12 ++ arch/arm/mach-vt8500/include/mach/i8042.h | 18 ++ arch/arm/mach-vt8500/include/mach/io.h | 28 +++ arch/arm/mach-vt8500/include/mach/irqs.h | 22 ++ arch/arm/mach-vt8500/include/mach/memory.h | 28 +++ arch/arm/mach-vt8500/include/mach/system.h | 18 ++ arch/arm/mach-vt8500/include/mach/timex.h | 26 +++ arch/arm/mach-vt8500/include/mach/uncompress.h | 37 ++++ arch/arm/mach-vt8500/include/mach/vmalloc.h | 20 ++ arch/arm/mach-vt8500/include/mach/vt8500_irqs.h | 88 ++++++++ arch/arm/mach-vt8500/include/mach/vt8500_regs.h | 79 +++++++ arch/arm/mach-vt8500/include/mach/vt8500fb.h | 31 +++ arch/arm/mach-vt8500/include/mach/wm8505_irqs.h | 115 ++++++++++ arch/arm/mach-vt8500/include/mach/wm8505_regs.h | 78 +++++++ arch/arm/mach-vt8500/irq.c | 177 ++++++++++++++++ arch/arm/mach-vt8500/pwm.c | 265 +++++++++++++++++++++++ arch/arm/mach-vt8500/timer.c | 155 ++++++++++++++ arch/arm/mach-vt8500/wm8505_7in.c | 77 +++++++ 34 files changed, 2356 insertions(+) create mode 100644 arch/arm/boot/compressed/head-vt8500.S create mode 100644 arch/arm/mach-vt8500/Kconfig create mode 100644 arch/arm/mach-vt8500/Makefile create mode 100644 arch/arm/mach-vt8500/Makefile.boot create mode 100644 arch/arm/mach-vt8500/bv07.c create mode 100644 arch/arm/mach-vt8500/devices-vt8500.c create mode 100644 arch/arm/mach-vt8500/devices-wm8505.c create mode 100644 arch/arm/mach-vt8500/devices.c create mode 100644 arch/arm/mach-vt8500/devices.h create mode 100644 arch/arm/mach-vt8500/gpio.c create mode 100644 arch/arm/mach-vt8500/include/mach/debug-macro.S create mode 100644 arch/arm/mach-vt8500/include/mach/entry-macro.S create mode 100644 arch/arm/mach-vt8500/include/mach/gpio.h create mode 100644 arch/arm/mach-vt8500/include/mach/hardware.h create mode 100644 arch/arm/mach-vt8500/include/mach/i8042.h create mode 100644 arch/arm/mach-vt8500/include/mach/io.h create mode 100644 arch/arm/mach-vt8500/include/mach/irqs.h create mode 100644 arch/arm/mach-vt8500/include/mach/memory.h create mode 100644 arch/arm/mach-vt8500/include/mach/system.h create mode 100644 arch/arm/mach-vt8500/include/mach/timex.h create mode 100644 arch/arm/mach-vt8500/include/mach/uncompress.h create mode 100644 arch/arm/mach-vt8500/include/mach/vmalloc.h create mode 100644 arch/arm/mach-vt8500/include/mach/vt8500_irqs.h create mode 100644 arch/arm/mach-vt8500/include/mach/vt8500_regs.h create mode 100644 arch/arm/mach-vt8500/include/mach/vt8500fb.h create mode 100644 arch/arm/mach-vt8500/include/mach/wm8505_irqs.h create mode 100644 arch/arm/mach-vt8500/include/mach/wm8505_regs.h create mode 100644 arch/arm/mach-vt8500/irq.c create mode 100644 arch/arm/mach-vt8500/pwm.c create mode 100644 arch/arm/mach-vt8500/timer.c create mode 100644 arch/arm/mach-vt8500/wm8505_7in.c (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5cff165b7eb..cab466fc5ae 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -875,6 +875,16 @@ config PLAT_SPEAR help Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx). +config ARCH_VT8500 + bool "VIA/WonderMedia 85xx" + select CPU_ARM926T + select GENERIC_GPIO + select ARCH_HAS_CPUFREQ + select GENERIC_CLOCKEVENTS + select ARCH_REQUIRE_GPIOLIB + select HAVE_PWM + help + Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip. endchoice # @@ -1007,6 +1017,8 @@ source "arch/arm/mach-versatile/Kconfig" source "arch/arm/mach-vexpress/Kconfig" +source "arch/arm/mach-vt8500/Kconfig" + source "arch/arm/mach-w90x900/Kconfig" # Definitions to make life easier diff --git a/arch/arm/Makefile b/arch/arm/Makefile index c22c1adfedd..bd3b13e3717 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -190,6 +190,7 @@ machine-$(CONFIG_ARCH_U300) := u300 machine-$(CONFIG_ARCH_U8500) := ux500 machine-$(CONFIG_ARCH_VERSATILE) := versatile machine-$(CONFIG_ARCH_VEXPRESS) := vexpress +machine-$(CONFIG_ARCH_VT8500) := vt8500 machine-$(CONFIG_ARCH_W90X900) := w90x900 machine-$(CONFIG_ARCH_NUC93X) := nuc93x machine-$(CONFIG_FOOTBRIDGE) := footbridge diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 0a8f748e506..78fe31a4f50 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -29,6 +29,10 @@ ifeq ($(CONFIG_ARCH_SA1100),y) OBJS += head-sa1100.o endif +ifeq ($(CONFIG_ARCH_VT8500),y) +OBJS += head-vt8500.o +endif + ifeq ($(CONFIG_CPU_XSCALE),y) OBJS += head-xscale.o endif diff --git a/arch/arm/boot/compressed/head-vt8500.S b/arch/arm/boot/compressed/head-vt8500.S new file mode 100644 index 00000000000..1dc1e21a3be --- /dev/null +++ b/arch/arm/boot/compressed/head-vt8500.S @@ -0,0 +1,46 @@ +/* + * linux/arch/arm/boot/compressed/head-vt8500.S + * + * Copyright (C) 2010 Alexey Charkov + * + * VIA VT8500 specific tweaks. This is merged into head.S by the linker. + * + */ + +#include +#include + + .section ".start", "ax" + +__VT8500_start: + @ Compare the SCC ID register against a list of known values + ldr r1, .SCCID + ldr r3, [r1] + + @ VT8500 override + ldr r4, .VT8500SCC + cmp r3, r4 + ldreq r7, .ID_BV07 + beq .Lendvt8500 + + @ WM8505 override + ldr r4, .WM8505SCC + cmp r3, r4 + ldreq r7, .ID_8505 + beq .Lendvt8500 + + @ Otherwise, leave the bootloader's machine id untouched + +.SCCID: + .word 0xd8120000 +.VT8500SCC: + .word 0x34000102 +.WM8505SCC: + .word 0x34260103 + +.ID_BV07: + .word MACH_TYPE_BV07 +.ID_8505: + .word MACH_TYPE_WM8505_7IN_NETBOOK + +.Lendvt8500: diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig new file mode 100644 index 00000000000..2c20a341c11 --- /dev/null +++ b/arch/arm/mach-vt8500/Kconfig @@ -0,0 +1,73 @@ +if ARCH_VT8500 + +config VTWM_VERSION_VT8500 + bool + +config VTWM_VERSION_WM8505 + bool + +config MACH_BV07 + bool "Benign BV07-8500 Mini Netbook" + depends on ARCH_VT8500 + select VTWM_VERSION_VT8500 + help + Add support for the inexpensive 7-inch netbooks sold by many + Chinese distributors under various names. Note that there are + many hardware implementations in identical exterior, make sure + that yours is indeed based on a VIA VT8500 chip. + +config MACH_WM8505_7IN_NETBOOK + bool "WM8505 7-inch generic netbook" + depends on ARCH_VT8500 + select VTWM_VERSION_WM8505 + help + Add support for the inexpensive 7-inch netbooks sold by many + Chinese distributors under various names. Note that there are + many hardware implementations in identical exterior, make sure + that yours is indeed based on a WonderMedia WM8505 chip. + +comment "LCD panel size" + +config WMT_PANEL_800X480 + bool "7-inch with 800x480 resolution" + depends on (FB_VT8500 || FB_WM8505) + default y + help + These are found in most of the netbooks in generic cases, as + well as in Eken M001 tablets and possibly elsewhere. + + To select this panel at runtime, say y here and append + 'panel=800x480' to your kernel command line. Otherwise, the + largest one available will be used. + +config WMT_PANEL_800X600 + bool "8-inch with 800x600 resolution" + depends on (FB_VT8500 || FB_WM8505) + help + These are found in Eken M003 tablets and possibly elsewhere. + + To select this panel at runtime, say y here and append + 'panel=800x600' to your kernel command line. Otherwise, the + largest one available will be used. + +config WMT_PANEL_1024X576 + bool "10-inch with 1024x576 resolution" + depends on (FB_VT8500 || FB_WM8505) + help + These are found in CherryPal netbooks and possibly elsewhere. + + To select this panel at runtime, say y here and append + 'panel=1024x576' to your kernel command line. Otherwise, the + largest one available will be used. + +config WMT_PANEL_1024X600 + bool "10-inch with 1024x600 resolution" + depends on (FB_VT8500 || FB_WM8505) + help + These are found in Eken M006 tablets and possibly elsewhere. + + To select this panel at runtime, say y here and append + 'panel=1024x600' to your kernel command line. Otherwise, the + largest one available will be used. + +endif diff --git a/arch/arm/mach-vt8500/Makefile b/arch/arm/mach-vt8500/Makefile new file mode 100644 index 00000000000..81aedb7c893 --- /dev/null +++ b/arch/arm/mach-vt8500/Makefile @@ -0,0 +1,9 @@ +obj-y += devices.o gpio.o irq.o timer.o + +obj-$(CONFIG_VTWM_VERSION_VT8500) += devices-vt8500.o +obj-$(CONFIG_VTWM_VERSION_WM8505) += devices-wm8505.o + +obj-$(CONFIG_MACH_BV07) += bv07.o +obj-$(CONFIG_MACH_WM8505_7IN_NETBOOK) += wm8505_7in.o + +obj-$(CONFIG_HAVE_PWM) += pwm.o diff --git a/arch/arm/mach-vt8500/Makefile.boot b/arch/arm/mach-vt8500/Makefile.boot new file mode 100644 index 00000000000..a8acc4e2490 --- /dev/null +++ b/arch/arm/mach-vt8500/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0x00008000 +params_phys-y := 0x00000100 +initrd_phys-y := 0x01000000 diff --git a/arch/arm/mach-vt8500/bv07.c b/arch/arm/mach-vt8500/bv07.c new file mode 100644 index 00000000000..94a261d86bf --- /dev/null +++ b/arch/arm/mach-vt8500/bv07.c @@ -0,0 +1,77 @@ +/* + * arch/arm/mach-vt8500/bv07.c + * + * Copyright (C) 2010 Alexey Charkov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include + +#include +#include + +#include "devices.h" + +static void __iomem *pmc_hiber; + +static struct platform_device *devices[] __initdata = { + &vt8500_device_uart0, + &vt8500_device_lcdc, + &vt8500_device_ehci, + &vt8500_device_ge_rops, + &vt8500_device_pwm, + &vt8500_device_pwmbl, + &vt8500_device_rtc, +}; + +static void vt8500_power_off(void) +{ + local_irq_disable(); + writew(5, pmc_hiber); + asm("mcr%? p15, 0, %0, c7, c0, 4" : : "r" (0)); +} + +void __init bv07_init(void) +{ +#ifdef CONFIG_FB_VT8500 + void __iomem *gpio_mux_reg = ioremap(wmt_gpio_base + 0x200, 4); + if (gpio_mux_reg) { + writel(readl(gpio_mux_reg) | 1, gpio_mux_reg); + iounmap(gpio_mux_reg); + } else { + printk(KERN_ERR "Could not remap the GPIO mux register, display may not work properly!\n"); + } +#endif + pmc_hiber = ioremap(wmt_pmc_base + 0x12, 2); + if (pmc_hiber) + pm_power_off = &vt8500_power_off; + else + printk(KERN_ERR "PMC Hibernation register could not be remapped, not enabling power off!\n"); + + vt8500_set_resources(); + platform_add_devices(devices, ARRAY_SIZE(devices)); + vt8500_gpio_init(); +} + +MACHINE_START(BV07, "Benign BV07 Mini Netbook") + .boot_params = 0x00000100, + .reserve = vt8500_reserve_mem, + .map_io = vt8500_map_io, + .init_irq = vt8500_init_irq, + .timer = &vt8500_timer, + .init_machine = bv07_init, +MACHINE_END diff --git a/arch/arm/mach-vt8500/devices-vt8500.c b/arch/arm/mach-vt8500/devices-vt8500.c new file mode 100644 index 00000000000..19519aeecf3 --- /dev/null +++ b/arch/arm/mach-vt8500/devices-vt8500.c @@ -0,0 +1,91 @@ +/* linux/arch/arm/mach-vt8500/devices-vt8500.c + * + * Copyright (C) 2010 Alexey Charkov + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include + +#include +#include +#include +#include "devices.h" + +void __init vt8500_set_resources(void) +{ + struct resource tmp[3]; + + tmp[0] = wmt_mmio_res(VT8500_LCDC_BASE, SZ_1K); + tmp[1] = wmt_irq_res(IRQ_LCDC); + wmt_res_add(&vt8500_device_lcdc, tmp, 2); + + tmp[0] = wmt_mmio_res(VT8500_UART0_BASE, 0x1040); + tmp[1] = wmt_irq_res(IRQ_UART0); + wmt_res_add(&vt8500_device_uart0, tmp, 2); + + tmp[0] = wmt_mmio_res(VT8500_UART1_BASE, 0x1040); + tmp[1] = wmt_irq_res(IRQ_UART1); + wmt_res_add(&vt8500_device_uart1, tmp, 2); + + tmp[0] = wmt_mmio_res(VT8500_UART2_BASE, 0x1040); + tmp[1] = wmt_irq_res(IRQ_UART2); + wmt_res_add(&vt8500_device_uart2, tmp, 2); + + tmp[0] = wmt_mmio_res(VT8500_UART3_BASE, 0x1040); + tmp[1] = wmt_irq_res(IRQ_UART3); + wmt_res_add(&vt8500_device_uart3, tmp, 2); + + tmp[0] = wmt_mmio_res(VT8500_EHCI_BASE, SZ_512); + tmp[1] = wmt_irq_res(IRQ_EHCI); + wmt_res_add(&vt8500_device_ehci, tmp, 2); + + tmp[0] = wmt_mmio_res(VT8500_GEGEA_BASE, SZ_256); + wmt_res_add(&vt8500_device_ge_rops, tmp, 1); + + tmp[0] = wmt_mmio_res(VT8500_PWM_BASE, 0x44); + wmt_res_add(&vt8500_device_pwm, tmp, 1); + + tmp[0] = wmt_mmio_res(VT8500_RTC_BASE, 0x2c); + tmp[1] = wmt_irq_res(IRQ_RTC); + tmp[2] = wmt_irq_res(IRQ_RTCSM); + wmt_res_add(&vt8500_device_rtc, tmp, 3); +} + +static void __init vt8500_set_externs(void) +{ + /* Non-resource-aware stuff */ + wmt_ic_base = VT8500_IC_BASE; + wmt_gpio_base = VT8500_GPIO_BASE; + wmt_pmc_base = VT8500_PMC_BASE; + wmt_i8042_base = VT8500_PS2_BASE; + + wmt_nr_irqs = VT8500_NR_IRQS; + wmt_timer_irq = IRQ_PMCOS0; + wmt_gpio_ext_irq[0] = IRQ_EXT0; + wmt_gpio_ext_irq[1] = IRQ_EXT1; + wmt_gpio_ext_irq[2] = IRQ_EXT2; + wmt_gpio_ext_irq[3] = IRQ_EXT3; + wmt_gpio_ext_irq[4] = IRQ_EXT4; + wmt_gpio_ext_irq[5] = IRQ_EXT5; + wmt_gpio_ext_irq[6] = IRQ_EXT6; + wmt_gpio_ext_irq[7] = IRQ_EXT7; + wmt_i8042_kbd_irq = IRQ_PS2KBD; + wmt_i8042_aux_irq = IRQ_PS2MOUSE; +} + +void __init vt8500_map_io(void) +{ + iotable_init(wmt_io_desc, ARRAY_SIZE(wmt_io_desc)); + + /* Should be done before interrupts and timers are initialized */ + vt8500_set_externs(); +} diff --git a/arch/arm/mach-vt8500/devices-wm8505.c b/arch/arm/mach-vt8500/devices-wm8505.c new file mode 100644 index 00000000000..db4594e029f --- /dev/null +++ b/arch/arm/mach-vt8500/devices-wm8505.c @@ -0,0 +1,99 @@ +/* linux/arch/arm/mach-vt8500/devices-wm8505.c + * + * Copyright (C) 2010 Alexey Charkov + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include + +#include +#include +#include +#include "devices.h" + +void __init wm8505_set_resources(void) +{ + struct resource tmp[3]; + + tmp[0] = wmt_mmio_res(WM8505_GOVR_BASE, SZ_512); + wmt_res_add(&vt8500_device_wm8505_fb, tmp, 1); + + tmp[0] = wmt_mmio_res(WM8505_UART0_BASE, 0x1040); + tmp[1] = wmt_irq_res(IRQ_UART0); + wmt_res_add(&vt8500_device_uart0, tmp, 2); + + tmp[0] = wmt_mmio_res(WM8505_UART1_BASE, 0x1040); + tmp[1] = wmt_irq_res(IRQ_UART1); + wmt_res_add(&vt8500_device_uart1, tmp, 2); + + tmp[0] = wmt_mmio_res(WM8505_UART2_BASE, 0x1040); + tmp[1] = wmt_irq_res(IRQ_UART2); + wmt_res_add(&vt8500_device_uart2, tmp, 2); + + tmp[0] = wmt_mmio_res(WM8505_UART3_BASE, 0x1040); + tmp[1] = wmt_irq_res(IRQ_UART3); + wmt_res_add(&vt8500_device_uart3, tmp, 2); + + tmp[0] = wmt_mmio_res(WM8505_UART4_BASE, 0x1040); + tmp[1] = wmt_irq_res(IRQ_UART4); + wmt_res_add(&vt8500_device_uart4, tmp, 2); + + tmp[0] = wmt_mmio_res(WM8505_UART5_BASE, 0x1040); + tmp[1] = wmt_irq_res(IRQ_UART5); + wmt_res_add(&vt8500_device_uart5, tmp, 2); + + tmp[0] = wmt_mmio_res(WM8505_EHCI_BASE, SZ_512); + tmp[1] = wmt_irq_res(IRQ_EHCI); + wmt_res_add(&vt8500_device_ehci, tmp, 2); + + tmp[0] = wmt_mmio_res(WM8505_GEGEA_BASE, SZ_256); + wmt_res_add(&vt8500_device_ge_rops, tmp, 1); + + tmp[0] = wmt_mmio_res(WM8505_PWM_BASE, 0x44); + wmt_res_add(&vt8500_device_pwm, tmp, 1); + + tmp[0] = wmt_mmio_res(WM8505_RTC_BASE, 0x2c); + tmp[1] = wmt_irq_res(IRQ_RTC); + tmp[2] = wmt_irq_res(IRQ_RTCSM); + wmt_res_add(&vt8500_device_rtc, tmp, 3); +} + +static void __init wm8505_set_externs(void) +{ + /* Non-resource-aware stuff */ + wmt_ic_base = WM8505_IC_BASE; + wmt_sic_base = WM8505_SIC_BASE; + wmt_gpio_base = WM8505_GPIO_BASE; + wmt_pmc_base = WM8505_PMC_BASE; + wmt_i8042_base = WM8505_PS2_BASE; + + wmt_nr_irqs = WM8505_NR_IRQS; + wmt_timer_irq = IRQ_PMCOS0; + wmt_gpio_ext_irq[0] = IRQ_EXT0; + wmt_gpio_ext_irq[1] = IRQ_EXT1; + wmt_gpio_ext_irq[2] = IRQ_EXT2; + wmt_gpio_ext_irq[3] = IRQ_EXT3; + wmt_gpio_ext_irq[4] = IRQ_EXT4; + wmt_gpio_ext_irq[5] = IRQ_EXT5; + wmt_gpio_ext_irq[6] = IRQ_EXT6; + wmt_gpio_ext_irq[7] = IRQ_EXT7; + wmt_i8042_kbd_irq = IRQ_PS2KBD; + wmt_i8042_aux_irq = IRQ_PS2MOUSE; +} + +void __init wm8505_map_io(void) +{ + iotable_init(wmt_io_desc, ARRAY_SIZE(wmt_io_desc)); + + /* Should be done before interrupts and timers are initialized */ + wm8505_set_externs(); +} diff --git a/arch/arm/mach-vt8500/devices.c b/arch/arm/mach-vt8500/devices.c new file mode 100644 index 00000000000..1fcdc36b358 --- /dev/null +++ b/arch/arm/mach-vt8500/devices.c @@ -0,0 +1,270 @@ +/* linux/arch/arm/mach-vt8500/devices.c + * + * Copyright (C) 2010 Alexey Charkov + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include "devices.h" + +/* These can't use resources currently */ +unsigned long wmt_ic_base __initdata; +unsigned long wmt_sic_base __initdata; +unsigned long wmt_gpio_base __initdata; +unsigned long wmt_pmc_base __initdata; +unsigned long wmt_i8042_base __initdata; + +int wmt_nr_irqs __initdata; +int wmt_timer_irq __initdata; +int wmt_gpio_ext_irq[8] __initdata; + +/* Should remain accessible after init. + * i8042 driver desperately calls for attention... + */ +int wmt_i8042_kbd_irq; +int wmt_i8042_aux_irq; + +static u64 fb_dma_mask = DMA_BIT_MASK(32); + +struct platform_device vt8500_device_lcdc = { + .name = "vt8500-lcd", + .id = 0, + .dev = { + .dma_mask = &fb_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +struct platform_device vt8500_device_wm8505_fb = { + .name = "wm8505-fb", + .id = 0, +}; + +/* Smallest to largest */ +static struct vt8500fb_platform_data panels[] = { +#ifdef CONFIG_WMT_PANEL_800X480 +{ + .xres_virtual = 800, + .yres_virtual = 480 * 2, + .mode = { + .name = "800x480", + .xres = 800, + .yres = 480, + .left_margin = 88, + .right_margin = 40, + .upper_margin = 32, + .lower_margin = 11, + .hsync_len = 0, + .vsync_len = 1, + .vmode = FB_VMODE_NONINTERLACED, + }, +}, +#endif +#ifdef CONFIG_WMT_PANEL_800X600 +{ + .xres_virtual = 800, + .yres_virtual = 600 * 2, + .mode = { + .name = "800x600", + .xres = 800, + .yres = 600, + .left_margin = 88, + .right_margin = 40, + .upper_margin = 32, + .lower_margin = 11, + .hsync_len = 0, + .vsync_len = 1, + .vmode = FB_VMODE_NONINTERLACED, + }, +}, +#endif +#ifdef CONFIG_WMT_PANEL_1024X576 +{ + .xres_virtual = 1024, + .yres_virtual = 576 * 2, + .mode = { + .name = "1024x576", + .xres = 1024, + .yres = 576, + .left_margin = 40, + .right_margin = 24, + .upper_margin = 32, + .lower_margin = 11, + .hsync_len = 96, + .vsync_len = 2, + .vmode = FB_VMODE_NONINTERLACED, + }, +}, +#endif +#ifdef CONFIG_WMT_PANEL_1024X600 +{ + .xres_virtual = 1024, + .yres_virtual = 600 * 2, + .mode = { + .name = "1024x600", + .xres = 1024, + .yres = 600, + .left_margin = 66, + .right_margin = 2, + .upper_margin = 19, + .lower_margin = 1, + .hsync_len = 23, + .vsync_len = 8, + .vmode = FB_VMODE_NONINTERLACED, + }, +}, +#endif +}; + +static int current_panel_idx __initdata = ARRAY_SIZE(panels) - 1; + +static int __init panel_setup(char *str) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(panels); i++) { + if (strcmp(panels[i].mode.name, str) == 0) { + current_panel_idx = i; + break; + } + } + return 0; +} + +early_param("panel", panel_setup); + +static inline void preallocate_fb(struct vt8500fb_platform_data *p, + unsigned long align) { + p->video_mem_len = (p->xres_virtual * p->yres_virtual * 4) >> + (p->bpp > 16 ? 0 : (p->bpp > 8 ? 1 : + (8 / p->bpp) + 1)); + p->video_mem_phys = (unsigned long)memblock_alloc(p->video_mem_len, + align); + p->video_mem_virt = phys_to_virt(p->video_mem_phys); +} + +struct platform_device vt8500_device_uart0 = { + .name = "vt8500_serial", + .id = 0, +}; + +struct platform_device vt8500_device_uart1 = { + .name = "vt8500_serial", + .id = 1, +}; + +struct platform_device vt8500_device_uart2 = { + .name = "vt8500_serial", + .id = 2, +}; + +struct platform_device vt8500_device_uart3 = { + .name = "vt8500_serial", + .id = 3, +}; + +struct platform_device vt8500_device_uart4 = { + .name = "vt8500_serial", + .id = 4, +}; + +struct platform_device vt8500_device_uart5 = { + .name = "vt8500_serial", + .id = 5, +}; + +static u64 ehci_dma_mask = DMA_BIT_MASK(32); + +struct platform_device vt8500_device_ehci = { + .name = "vt8500-ehci", + .id = 0, + .dev = { + .dma_mask = &ehci_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +struct platform_device vt8500_device_ge_rops = { + .name = "wmt_ge_rops", + .id = -1, +}; + +struct platform_device vt8500_device_pwm = { + .name = "vt8500-pwm", + .id = 0, +}; + +static struct platform_pwm_backlight_data vt8500_pwmbl_data = { + .pwm_id = 0, + .max_brightness = 128, + .dft_brightness = 70, + .pwm_period_ns = 250000, /* revisit when clocks are implemented */ +}; + +struct platform_device vt8500_device_pwmbl = { + .name = "pwm-backlight", + .id = 0, + .dev = { + .platform_data = &vt8500_pwmbl_data, + }, +}; + +struct platform_device vt8500_device_rtc = { + .name = "vt8500-rtc", + .id = 0, +}; + +struct map_desc wmt_io_desc[] __initdata = { + /* SoC MMIO registers */ + [0] = { + .virtual = 0xf8000000, + .pfn = __phys_to_pfn(0xd8000000), + .length = 0x00390000, /* max of all chip variants */ + .type = MT_DEVICE + }, + /* PCI I/O space, numbers tied to those in */ + [1] = { + .virtual = 0xf0000000, + .pfn = __phys_to_pfn(0xc0000000), + .length = SZ_64K, + .type = MT_DEVICE + }, +}; + +void __init vt8500_reserve_mem(void) +{ +#ifdef CONFIG_FB_VT8500 + panels[current_panel_idx].bpp = 16; /* Always use RGB565 */ + preallocate_fb(&panels[current_panel_idx], SZ_4M); + vt8500_device_lcdc.dev.platform_data = &panels[current_panel_idx]; +#endif +} + +void __init wm8505_reserve_mem(void) +{ +#if defined CONFIG_FB_WM8505 + panels[current_panel_idx].bpp = 32; /* Always use RGB888 */ + preallocate_fb(&panels[current_panel_idx], 32); + vt8500_device_wm8505_fb.dev.platform_data = &panels[current_panel_idx]; +#endif +} diff --git a/arch/arm/mach-vt8500/devices.h b/arch/arm/mach-vt8500/devices.h new file mode 100644 index 00000000000..188d4e17f35 --- /dev/null +++ b/arch/arm/mach-vt8500/devices.h @@ -0,0 +1,88 @@ +/* linux/arch/arm/mach-vt8500/devices.h + * + * Copyright (C) 2010 Alexey Charkov + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __ARCH_ARM_MACH_VT8500_DEVICES_H +#define __ARCH_ARM_MACH_VT8500_DEVICES_H + +#include +#include + +void __init vt8500_init_irq(void); +void __init wm8505_init_irq(void); +void __init vt8500_map_io(void); +void __init wm8505_map_io(void); +void __init vt8500_reserve_mem(void); +void __init wm8505_reserve_mem(void); +void __init vt8500_gpio_init(void); +void __init vt8500_set_resources(void); +void __init wm8505_set_resources(void); + +extern unsigned long wmt_ic_base __initdata; +extern unsigned long wmt_sic_base __initdata; +extern unsigned long wmt_gpio_base __initdata; +extern unsigned long wmt_pmc_base __initdata; + +extern int wmt_nr_irqs __initdata; +extern int wmt_timer_irq __initdata; +extern int wmt_gpio_ext_irq[8] __initdata; + +extern struct map_desc wmt_io_desc[2] __initdata; + +static inline struct resource wmt_mmio_res(u32 start, u32 size) +{ + struct resource tmp = { + .flags = IORESOURCE_MEM, + .start = start, + .end = start + size - 1, + }; + + return tmp; +} + +static inline struct resource wmt_irq_res(int irq) +{ + struct resource tmp = { + .flags = IORESOURCE_IRQ, + .start = irq, + .end = irq, + }; + + return tmp; +} + +static inline void wmt_res_add(struct platform_device *pdev, + const struct resource *res, unsigned int num) +{ + if (unlikely(platform_device_add_resources(pdev, res, num))) + pr_err("Failed to assign resources\n"); +} + +extern struct sys_timer vt8500_timer; + +extern struct platform_device vt8500_device_uart0; +extern struct platform_device vt8500_device_uart1; +extern struct platform_device vt8500_device_uart2; +extern struct platform_device vt8500_device_uart3; +extern struct platform_device vt8500_device_uart4; +extern struct platform_device vt8500_device_uart5; + +extern struct platform_device vt8500_device_lcdc; +extern struct platform_device vt8500_device_wm8505_fb; +extern struct platform_device vt8500_device_ehci; +extern struct platform_device vt8500_device_ge_rops; +extern struct platform_device vt8500_device_pwm; +extern struct platform_device vt8500_device_pwmbl; +extern struct platform_device vt8500_device_rtc; +#endif diff --git a/arch/arm/mach-vt8500/gpio.c b/arch/arm/mach-vt8500/gpio.c new file mode 100644 index 00000000000..2bcc0ec783d --- /dev/null +++ b/arch/arm/mach-vt8500/gpio.c @@ -0,0 +1,240 @@ +/* linux/arch/arm/mach-vt8500/gpio.c + * + * Copyright (C) 2010 Alexey Charkov + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include + +#include "devices.h" + +#define to_vt8500(__chip) container_of(__chip, struct vt8500_gpio_chip, chip) + +#define ENABLE_REGS 0x0 +#define DIRECTION_REGS 0x20 +#define OUTVALUE_REGS 0x40 +#define INVALUE_REGS 0x60 + +#define EXT_REGOFF 0x1c + +static void __iomem *regbase; + +struct vt8500_gpio_chip { + struct gpio_chip chip; + unsigned int shift; + unsigned int regoff; +}; + +static int gpio_to_irq_map[8]; + +static int vt8500_muxed_gpio_request(struct gpio_chip *chip, + unsigned offset) +{ + struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip); + unsigned val = readl(regbase + ENABLE_REGS + vt8500_chip->regoff); + + val |= (1 << vt8500_chip->shift << offset); + writel(val, regbase + ENABLE_REGS + vt8500_chip->regoff); + + return 0; +} + +static void vt8500_muxed_gpio_free(struct gpio_chip *chip, + unsigned offset) +{ + struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip); + unsigned val = readl(regbase + ENABLE_REGS + vt8500_chip->regoff); + + val &= ~(1 << vt8500_chip->shift << offset); + writel(val, regbase + ENABLE_REGS + vt8500_chip->regoff); +} + +static int vt8500_muxed_gpio_direction_input(struct gpio_chip *chip, + unsigned offset) +{ + struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip); + unsigned val = readl(regbase + DIRECTION_REGS + vt8500_chip->regoff); + + val &= ~(1 << vt8500_chip->shift << offset); + writel(val, regbase + DIRECTION_REGS + vt8500_chip->regoff); + + return 0; +} + +static int vt8500_muxed_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip); + unsigned val = readl(regbase + DIRECTION_REGS + vt8500_chip->regoff); + + val |= (1 << vt8500_chip->shift << offset); + writel(val, regbase + DIRECTION_REGS + vt8500_chip->regoff); + + if (value) { + val = readl(regbase + OUTVALUE_REGS + vt8500_chip->regoff); + val |= (1 << vt8500_chip->shift << offset); + writel(val, regbase + OUTVALUE_REGS + vt8500_chip->regoff); + } + return 0; +} + +static int vt8500_muxed_gpio_get_value(struct gpio_chip *chip, + unsigned offset) +{ + struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip); + + return (readl(regbase + INVALUE_REGS + vt8500_chip->regoff) + >> vt8500_chip->shift >> offset) & 1; +} + +static void vt8500_muxed_gpio_set_value(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip); + unsigned val = readl(regbase + INVALUE_REGS + vt8500_chip->regoff); + + if (value) + val |= (1 << vt8500_chip->shift << offset); + else + val &= ~(1 << vt8500_chip->shift << offset); + + writel(val, regbase + INVALUE_REGS + vt8500_chip->regoff); +} + +#define VT8500_GPIO_BANK(__name, __shift, __off, __base, __num) \ +{ \ + .chip = { \ + .label = __name, \ + .request = vt8500_muxed_gpio_request, \ + .free = vt8500_muxed_gpio_free, \ + .direction_input = vt8500_muxed_gpio_direction_input, \ + .direction_output = vt8500_muxed_gpio_direction_output, \ + .get = vt8500_muxed_gpio_get_value, \ + .set = vt8500_muxed_gpio_set_value, \ + .can_sleep = 0, \ + .base = __base, \ + .ngpio = __num, \ + }, \ + .shift = __shift, \ + .regoff = __off, \ +} + +static struct vt8500_gpio_chip vt8500_muxed_gpios[] = { + VT8500_GPIO_BANK("uart0", 0, 0x0, 8, 4), + VT8500_GPIO_BANK("uart1", 4, 0x0, 12, 4), + VT8500_GPIO_BANK("spi0", 8, 0x0, 16, 4), + VT8500_GPIO_BANK("spi1", 12, 0x0, 20, 4), + VT8500_GPIO_BANK("spi2", 16, 0x0, 24, 4), + VT8500_GPIO_BANK("pwmout", 24, 0x0, 28, 2), + + VT8500_GPIO_BANK("sdmmc", 0, 0x4, 30, 11), + VT8500_GPIO_BANK("ms", 16, 0x4, 41, 7), + VT8500_GPIO_BANK("i2c0", 24, 0x4, 48, 2), + VT8500_GPIO_BANK("i2c1", 26, 0x4, 50, 2), + + VT8500_GPIO_BANK("mii", 0, 0x8, 52, 20), + VT8500_GPIO_BANK("see", 20, 0x8, 72, 4), + VT8500_GPIO_BANK("ide", 24, 0x8, 76, 7), + + VT8500_GPIO_BANK("ccir", 0, 0xc, 83, 19), + + VT8500_GPIO_BANK("ts", 8, 0x10, 102, 11), + + VT8500_GPIO_BANK("lcd", 0, 0x14, 113, 23), +}; + +static int vt8500_gpio_direction_input(struct gpio_chip *chip, + unsigned offset) +{ + unsigned val = readl(regbase + DIRECTION_REGS + EXT_REGOFF); + + val &= ~(1 << offset); + writel(val, regbase + DIRECTION_REGS + EXT_REGOFF); + return 0; +} + +static int vt8500_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + unsigned val = readl(regbase + DIRECTION_REGS + EXT_REGOFF); + + val |= (1 << offset); + writel(val, regbase + DIRECTION_REGS + EXT_REGOFF); + + if (value) { + val = readl(regbase + OUTVALUE_REGS + EXT_REGOFF); + val |= (1 << offset); + writel(val, regbase + OUTVALUE_REGS + EXT_REGOFF); + } + return 0; +} + +static int vt8500_gpio_get_value(struct gpio_chip *chip, + unsigned offset) +{ + return (readl(regbase + INVALUE_REGS + EXT_REGOFF) >> offset) & 1; +} + +static void vt8500_gpio_set_value(struct gpio_chip *chip, + unsigned offset, int value) +{ + unsigned val = readl(regbase + OUTVALUE_REGS + EXT_REGOFF); + + if (value) + val |= (1 << offset); + else + val &= ~(1 << offset); + + writel(val, regbase + OUTVALUE_REGS + EXT_REGOFF); +} + +static int vt8500_gpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + if (offset > 7) + return -EINVAL; + + return gpio_to_irq_map[offset]; +} + +static struct gpio_chip vt8500_external_gpios = { + .label = "extgpio", + .direction_input = vt8500_gpio_direction_input, + .direction_output = vt8500_gpio_direction_output, + .get = vt8500_gpio_get_value, + .set = vt8500_gpio_set_value, + .to_irq = vt8500_gpio_to_irq, + .can_sleep = 0, + .base = 0, + .ngpio = 8, +}; + +void __init vt8500_gpio_init(void) +{ + int i; + + for (i = 0; i < 8; i++) + gpio_to_irq_map[i] = wmt_gpio_ext_irq[i]; + + regbase = ioremap(wmt_gpio_base, SZ_64K); + if (!regbase) { + printk(KERN_ERR "Failed to map MMIO registers for GPIO\n"); + return; + } + + gpiochip_add(&vt8500_external_gpios); + + for (i = 0; i < ARRAY_SIZE(vt8500_muxed_gpios); i++) + gpiochip_add(&vt8500_muxed_gpios[i].chip); +} diff --git a/arch/arm/mach-vt8500/include/mach/debug-macro.S b/arch/arm/mach-vt8500/include/mach/debug-macro.S new file mode 100644 index 00000000000..f1191626ad5 --- /dev/null +++ b/arch/arm/mach-vt8500/include/mach/debug-macro.S @@ -0,0 +1,31 @@ +/* + * arch/arm/mach-vt8500/include/mach/debug-macro.S + * + * Copyright (C) 2010 Alexey Charkov + * + * Debugging macro include header + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + + .macro addruart, rp, rv + mov \rp, #0x00200000 + orr \rv, \rp, #0xf8000000 + orr \rp, \rp, #0xd8000000 + .endm + + .macro senduart,rd,rx + strb \rd, [\rx, #0] + .endm + + .macro busyuart,rd,rx +1001: ldr \rd, [\rx, #0x1c] + ands \rd, \rd, #0x2 + bne 1001b + .endm + + .macro waituart,rd,rx + .endm diff --git a/arch/arm/mach-vt8500/include/mach/entry-macro.S b/arch/arm/mach-vt8500/include/mach/entry-macro.S new file mode 100644 index 00000000000..92684c7eaed --- /dev/null +++ b/arch/arm/mach-vt8500/include/mach/entry-macro.S @@ -0,0 +1,32 @@ +/* + * arch/arm/mach-vt8500/include/mach/entry-macro.S + * + * Low-level IRQ helper macros for VIA VT8500 + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + @ physical 0xd8140000 is virtual 0xf8140000 + mov \base, #0xf8000000 + orr \base, \base, #0x00140000 + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \irqnr, [\base] + cmp \irqnr, #63 @ may be false positive, check interrupt status + bne 1001f + ldr \irqstat, [\base, #0x84] + ands \irqstat, #0x80000000 + moveq \irqnr, #0 +1001: + .endm + diff --git a/arch/arm/mach-vt8500/include/mach/gpio.h b/arch/arm/mach-vt8500/include/mach/gpio.h new file mode 100644 index 00000000000..94ff27678a4 --- /dev/null +++ b/arch/arm/mach-vt8500/include/mach/gpio.h @@ -0,0 +1,6 @@ +#include + +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep +#define gpio_to_irq __gpio_to_irq diff --git a/arch/arm/mach-vt8500/include/mach/hardware.h b/arch/arm/mach-vt8500/include/mach/hardware.h new file mode 100644 index 00000000000..db4163f72c3 --- /dev/null +++ b/arch/arm/mach-vt8500/include/mach/hardware.h @@ -0,0 +1,12 @@ +/* arch/arm/mach-vt8500/include/mach/hardware.h + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ diff --git a/arch/arm/mach-vt8500/include/mach/i8042.h b/arch/arm/mach-vt8500/include/mach/i8042.h new file mode 100644 index 00000000000..cd7143cad6f --- /dev/null +++ b/arch/arm/mach-vt8500/include/mach/i8042.h @@ -0,0 +1,18 @@ +/* arch/arm/mach-vt8500/include/mach/i8042.h + * + * Copyright (C) 2010 Alexey Charkov + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +extern unsigned long wmt_i8042_base __initdata; +extern int wmt_i8042_kbd_irq; +extern int wmt_i8042_aux_irq; diff --git a/arch/arm/mach-vt8500/include/mach/io.h b/arch/arm/mach-vt8500/include/mach/io.h new file mode 100644 index 00000000000..9077239f78c --- /dev/null +++ b/arch/arm/mach-vt8500/include/mach/io.h @@ -0,0 +1,28 @@ +/* + * arch/arm/mach-vt8500/include/mach/io.h + * + * Copyright (C) 2010 Alexey Charkov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xffff + +#define __io(a) __typesafe_io((a) + 0xf0000000) +#define __mem_pci(a) (a) + +#endif diff --git a/arch/arm/mach-vt8500/include/mach/irqs.h b/arch/arm/mach-vt8500/include/mach/irqs.h new file mode 100644 index 00000000000..a129fd1222f --- /dev/null +++ b/arch/arm/mach-vt8500/include/mach/irqs.h @@ -0,0 +1,22 @@ +/* + * arch/arm/mach-vt8500/include/mach/irqs.h + * + * Copyright (C) 2010 Alexey Charkov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* This value is just to make the core happy, never used otherwise */ +#define NR_IRQS 128 diff --git a/arch/arm/mach-vt8500/include/mach/memory.h b/arch/arm/mach-vt8500/include/mach/memory.h new file mode 100644 index 00000000000..175f914eff9 --- /dev/null +++ b/arch/arm/mach-vt8500/include/mach/memory.h @@ -0,0 +1,28 @@ +/* + * arch/arm/mach-vt8500/include/mach/memory.h + * + * Copyright (C) 2003 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +/* + * Physical DRAM offset. + */ +#define PHYS_OFFSET UL(0x00000000) + +#endif diff --git a/arch/arm/mach-vt8500/include/mach/system.h b/arch/arm/mach-vt8500/include/mach/system.h new file mode 100644 index 00000000000..d6c757eaf26 --- /dev/null +++ b/arch/arm/mach-vt8500/include/mach/system.h @@ -0,0 +1,18 @@ +/* + * arch/arm/mach-vt8500/include/mach/system.h + * + */ +#include + +/* PM Software Reset request register */ +#define VT8500_PMSR_VIRT 0xf8130060 + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +static inline void arch_reset(char mode, const char *cmd) +{ + writel(1, VT8500_PMSR_VIRT); +} diff --git a/arch/arm/mach-vt8500/include/mach/timex.h b/arch/arm/mach-vt8500/include/mach/timex.h new file mode 100644 index 00000000000..8487e4c690b --- /dev/null +++ b/arch/arm/mach-vt8500/include/mach/timex.h @@ -0,0 +1,26 @@ +/* + * arch/arm/mach-vt8500/include/mach/timex.h + * + * Copyright (C) 2010 Alexey Charkov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef MACH_TIMEX_H +#define MACH_TIMEX_H + +#define CLOCK_TICK_RATE (3000000) + +#endif /* MACH_TIMEX_H */ diff --git a/arch/arm/mach-vt8500/include/mach/uncompress.h b/arch/arm/mach-vt8500/include/mach/uncompress.h new file mode 100644 index 00000000000..bb9e2d23fee --- /dev/null +++ b/arch/arm/mach-vt8500/include/mach/uncompress.h @@ -0,0 +1,37 @@ +/* arch/arm/mach-vt8500/include/mach/uncompress.h + * + * Copyright (C) 2010 Alexey Charkov + * + * Based on arch/arm/mach-dove/include/mach/uncompress.h + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#define UART0_PHYS 0xd8200000 +#include + +static void putc(const char c) +{ + while (readb(UART0_PHYS + 0x1c) & 0x2) + /* Tx busy, wait and poll */; + + writeb(c, UART0_PHYS); +} + +static void flush(void) +{ +} + +/* + * nothing to do + */ +#define arch_decomp_setup() +#define arch_decomp_wdog() diff --git a/arch/arm/mach-vt8500/include/mach/vmalloc.h b/arch/arm/mach-vt8500/include/mach/vmalloc.h new file mode 100644 index 00000000000..4642290ce41 --- /dev/null +++ b/arch/arm/mach-vt8500/include/mach/vmalloc.h @@ -0,0 +1,20 @@ +/* + * arch/arm/mach-vt8500/include/mach/vmalloc.h + * + * Copyright (C) 2000 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define VMALLOC_END 0xd0000000UL diff --git a/arch/arm/mach-vt8500/include/mach/vt8500_irqs.h b/arch/arm/mach-vt8500/include/mach/vt8500_irqs.h new file mode 100644 index 00000000000..ecfee912471 --- /dev/null +++ b/arch/arm/mach-vt8500/include/mach/vt8500_irqs.h @@ -0,0 +1,88 @@ +/* + * arch/arm/mach-vt8500/include/mach/vt8500_irqs.h + * + * Copyright (C) 2010 Alexey Charkov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* VT8500 Interrupt Sources */ + +#define IRQ_JPEGENC 0 /* JPEG Encoder */ +#define IRQ_JPEGDEC 1 /* JPEG Decoder */ + /* Reserved */ +#define IRQ_PATA 3 /* PATA Controller */ + /* Reserved */ +#define IRQ_DMA 5 /* DMA Controller */ +#define IRQ_EXT0 6 /* External Interrupt 0 */ +#define IRQ_EXT1 7 /* External Interrupt 1 */ +#define IRQ_GE 8 /* Graphic Engine */ +#define IRQ_GOV 9 /* Graphic Overlay Engine */ +#define IRQ_ETHER 10 /* Ethernet MAC */ +#define IRQ_MPEGTS 11 /* Transport Stream Interface */ +#define IRQ_LCDC 12 /* LCD Controller */ +#define IRQ_EXT2 13 /* External Interrupt 2 */ +#define IRQ_EXT3 14 /* External Interrupt 3 */ +#define IRQ_EXT4 15 /* External Interrupt 4 */ +#define IRQ_CIPHER 16 /* Cipher */ +#define IRQ_VPP 17 /* Video Post-Processor */ +#define IRQ_I2C1 18 /* I2C 1 */ +#define IRQ_I2C0 19 /* I2C 0 */ +#define IRQ_SDMMC 20 /* SD/MMC Controller */ +#define IRQ_SDMMC_DMA 21 /* SD/MMC Controller DMA */ +#define IRQ_PMC_WU 22 /* Power Management Controller Wakeup */ + /* Reserved */ +#define IRQ_SPI0 24 /* SPI 0 */ +#define IRQ_SPI1 25 /* SPI 1 */ +#define IRQ_SPI2 26 /* SPI 2 */ +#define IRQ_LCDDF 27 /* LCD Data Formatter */ +#define IRQ_NAND 28 /* NAND Flash Controller */ +#define IRQ_NAND_DMA 29 /* NAND Flash Controller DMA */ +#define IRQ_MS 30 /* MemoryStick Controller */ +#define IRQ_MS_DMA 31 /* MemoryStick Controller DMA */ +#define IRQ_UART0 32 /* UART 0 */ +#define IRQ_UART1 33 /* UART 1 */ +#define IRQ_I2S 34 /* I2S */ +#define IRQ_PCM 35 /* PCM */ +#define IRQ_PMCOS0 36 /* PMC OS Timer 0 */ +#define IRQ_PMCOS1 37 /* PMC OS Timer 1 */ +#define IRQ_PMCOS2 38 /* PMC OS Timer 2 */ +#define IRQ_PMCOS3 39 /* PMC OS Timer 3 */ +#define IRQ_VPU 40 /* Video Processing Unit */ +#define IRQ_VID 41 /* Video Digital Input Interface */ +#define IRQ_AC97 42 /* AC97 Interface */ +#define IRQ_EHCI 43 /* USB */ +#define IRQ_NOR 44 /* NOR Flash Controller */ +#define IRQ_PS2MOUSE 45 /* PS/2 Mouse */ +#define IRQ_PS2KBD 46 /* PS/2 Keyboard */ +#define IRQ_UART2 47 /* UART 2 */ +#define IRQ_RTC 48 /* RTC Interrupt */ +#define IRQ_RTCSM 49 /* RTC Second/Minute Update Interrupt */ +#define IRQ_UART3 50 /* UART 3 */ +#define IRQ_ADC 51 /* ADC */ +#define IRQ_EXT5 52 /* External Interrupt 5 */ +#define IRQ_EXT6 53 /* External Interrupt 6 */ +#define IRQ_EXT7 54 /* External Interrupt 7 */ +#define IRQ_CIR 55 /* CIR */ +#define IRQ_DMA0 56 /* DMA Channel 0 */ +#define IRQ_DMA1 57 /* DMA Channel 1 */ +#define IRQ_DMA2 58 /* DMA Channel 2 */ +#define IRQ_DMA3 59 /* DMA Channel 3 */ +#define IRQ_DMA4 60 /* DMA Channel 4 */ +#define IRQ_DMA5 61 /* DMA Channel 5 */ +#define IRQ_DMA6 62 /* DMA Channel 6 */ +#define IRQ_DMA7 63 /* DMA Channel 7 */ + +#define VT8500_NR_IRQS 64 diff --git a/arch/arm/mach-vt8500/include/mach/vt8500_regs.h b/arch/arm/mach-vt8500/include/mach/vt8500_regs.h new file mode 100644 index 00000000000..29c63ecb238 --- /dev/null +++ b/arch/arm/mach-vt8500/include/mach/vt8500_regs.h @@ -0,0 +1,79 @@ +/* + * arch/arm/mach-vt8500/include/mach/vt8500_regs.h + * + * Copyright (C) 2010 Alexey Charkov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARM_ARCH_VT8500_REGS_H +#define __ASM_ARM_ARCH_VT8500_REGS_H + +/* VT8500 Registers Map */ + +#define VT8500_REGS_START_PHYS 0xd8000000 /* Start of MMIO registers */ +#define VT8500_REGS_START_VIRT 0xf8000000 /* Virtual mapping start */ + +#define VT8500_DDR_BASE 0xd8000000 /* 1k DDR/DDR2 Memory + Controller */ +#define VT8500_DMA_BASE 0xd8001000 /* 1k DMA Controller */ +#define VT8500_SFLASH_BASE 0xd8002000 /* 1k Serial Flash Memory + Controller */ +#define VT8500_ETHER_BASE 0xd8004000 /* 1k Ethernet MAC 0 */ +#define VT8500_CIPHER_BASE 0xd8006000 /* 4k Cipher */ +#define VT8500_USB_BASE 0xd8007800 /* 2k USB OTG */ +# define VT8500_EHCI_BASE 0xd8007900 /* EHCI */ +# define VT8500_UHCI_BASE 0xd8007b01 /* UHCI */ +#define VT8500_PATA_BASE 0xd8008000 /* 512 PATA */ +#define VT8500_PS2_BASE 0xd8008800 /* 1k PS/2 */ +#define VT8500_NAND_BASE 0xd8009000 /* 1k NAND Controller */ +#define VT8500_NOR_BASE 0xd8009400 /* 1k NOR Controller */ +#define VT8500_SDMMC_BASE 0xd800a000 /* 1k SD/MMC Controller */ +#define VT8500_MS_BASE 0xd800b000 /* 1k MS/MSPRO Controller */ +#define VT8500_LCDC_BASE 0xd800e400 /* 1k LCD Controller */ +#define VT8500_VPU_BASE 0xd8050000 /* 256 VPU */ +#define VT8500_GOV_BASE 0xd8050300 /* 256 GOV */ +#define VT8500_GEGEA_BASE 0xd8050400 /* 768 GE/GE Alpha Mixing */ +#define VT8500_LCDF_BASE 0xd8050900 /* 256 LCD Formatter */ +#define VT8500_VID_BASE 0xd8050a00 /* 256 VID */ +#define VT8500_VPP_BASE 0xd8050b00 /* 256 VPP */ +#define VT8500_TSBK_BASE 0xd80f4000 /* 4k TSBK */ +#define VT8500_JPEGDEC_BASE 0xd80fe000 /* 4k JPEG Decoder */ +#define VT8500_JPEGENC_BASE 0xd80ff000 /* 4k JPEG Encoder */ +#define VT8500_RTC_BASE 0xd8100000 /* 64k RTC */ +#define VT8500_GPIO_BASE 0xd8110000 /* 64k GPIO Configuration */ +#define VT8500_SCC_BASE 0xd8120000 /* 64k System Configuration*/ +#define VT8500_PMC_BASE 0xd8130000 /* 64k PMC Configuration */ +#define VT8500_IC_BASE 0xd8140000 /* 64k Interrupt Controller*/ +#define VT8500_UART0_BASE 0xd8200000 /* 64k UART 0 */ +#define VT8500_UART2_BASE 0xd8210000 /* 64k UART 2 */ +#define VT8500_PWM_BASE 0xd8220000 /* 64k PWM Configuration */ +#define VT8500_SPI0_BASE 0xd8240000 /* 64k SPI 0 */ +#define VT8500_SPI1_BASE 0xd8250000 /* 64k SPI 1 */ +#define VT8500_CIR_BASE 0xd8270000 /* 64k CIR */ +#define VT8500_I2C0_BASE 0xd8280000 /* 64k I2C 0 */ +#define VT8500_AC97_BASE 0xd8290000 /* 64k AC97 */ +#define VT8500_SPI2_BASE 0xd82a0000 /* 64k SPI 2 */ +#define VT8500_UART1_BASE 0xd82b0000 /* 64k UART 1 */ +#define VT8500_UART3_BASE 0xd82c0000 /* 64k UART 3 */ +#define VT8500_PCM_BASE 0xd82d0000 /* 64k PCM */ +#define VT8500_I2C1_BASE 0xd8320000 /* 64k I2C 1 */ +#define VT8500_I2S_BASE 0xd8330000 /* 64k I2S */ +#define VT8500_ADC_BASE 0xd8340000 /* 64k ADC */ + +#define VT8500_REGS_END_PHYS 0xd834ffff /* End of MMIO registers */ +#define VT8500_REGS_LENGTH (VT8500_REGS_END_PHYS \ + - VT8500_REGS_START_PHYS + 1) + +#endif diff --git a/arch/arm/mach-vt8500/include/mach/vt8500fb.h b/arch/arm/mach-vt8500/include/mach/vt8500fb.h new file mode 100644 index 00000000000..7f399c370fe --- /dev/null +++ b/arch/arm/mach-vt8500/include/mach/vt8500fb.h @@ -0,0 +1,31 @@ +/* + * VT8500/WM8505 Frame Buffer platform data definitions + * + * Copyright (C) 2010 Ed Spiridonov + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _VT8500FB_H +#define _VT8500FB_H + +#include + +struct vt8500fb_platform_data { + struct fb_videomode mode; + u32 xres_virtual; + u32 yres_virtual; + u32 bpp; + unsigned long video_mem_phys; + void *video_mem_virt; + unsigned long video_mem_len; +}; + +#endif /* _VT8500FB_H */ diff --git a/arch/arm/mach-vt8500/include/mach/wm8505_irqs.h b/arch/arm/mach-vt8500/include/mach/wm8505_irqs.h new file mode 100644 index 00000000000..6128627ac75 --- /dev/null +++ b/arch/arm/mach-vt8500/include/mach/wm8505_irqs.h @@ -0,0 +1,115 @@ +/* + * arch/arm/mach-vt8500/include/mach/wm8505_irqs.h + * + * Copyright (C) 2010 Alexey Charkov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* WM8505 Interrupt Sources */ + +#define IRQ_UHCI 0 /* UHC FS (UHCI?) */ +#define IRQ_EHCI 1 /* UHC HS */ +#define IRQ_UDCDMA 2 /* UDC DMA */ + /* Reserved */ +#define IRQ_PS2MOUSE 4 /* PS/2 Mouse */ +#define IRQ_UDC 5 /* UDC */ +#define IRQ_EXT0 6 /* External Interrupt 0 */ +#define IRQ_EXT1 7 /* External Interrupt 1 */ +#define IRQ_KEYPAD 8 /* Keypad */ +#define IRQ_DMA 9 /* DMA Controller */ +#define IRQ_ETHER 10 /* Ethernet MAC */ + /* Reserved */ + /* Reserved */ +#define IRQ_EXT2 13 /* External Interrupt 2 */ +#define IRQ_EXT3 14 /* External Interrupt 3 */ +#define IRQ_EXT4 15 /* External Interrupt 4 */ +#define IRQ_APB 16 /* APB Bridge */ +#define IRQ_DMA0 17 /* DMA Channel 0 */ +#define IRQ_I2C1 18 /* I2C 1 */ +#define IRQ_I2C0 19 /* I2C 0 */ +#define IRQ_SDMMC 20 /* SD/MMC Controller */ +#define IRQ_SDMMC_DMA 21 /* SD/MMC Controller DMA */ +#define IRQ_PMC_WU 22 /* Power Management Controller Wakeup */ +#define IRQ_PS2KBD 23 /* PS/2 Keyboard */ +#define IRQ_SPI0 24 /* SPI 0 */ +#define IRQ_SPI1 25 /* SPI 1 */ +#define IRQ_SPI2 26 /* SPI 2 */ +#define IRQ_DMA1 27 /* DMA Channel 1 */ +#define IRQ_NAND 28 /* NAND Flash Controller */ +#define IRQ_NAND_DMA 29 /* NAND Flash Controller DMA */ +#define IRQ_UART5 30 /* UART 5 */ +#define IRQ_UART4 31 /* UART 4 */ +#define IRQ_UART0 32 /* UART 0 */ +#define IRQ_UART1 33 /* UART 1 */ +#define IRQ_DMA2 34 /* DMA Channel 2 */ +#define IRQ_I2S 35 /* I2S */ +#define IRQ_PMCOS0 36 /* PMC OS Timer 0 */ +#define IRQ_PMCOS1 37 /* PMC OS Timer 1 */ +#define IRQ_PMCOS2 38 /* PMC OS Timer 2 */ +#define IRQ_PMCOS3 39 /* PMC OS Timer 3 */ +#define IRQ_DMA3 40 /* DMA Channel 3 */ +#define IRQ_DMA4 41 /* DMA Channel 4 */ +#define IRQ_AC97 42 /* AC97 Interface */ + /* Reserved */ +#define IRQ_NOR 44 /* NOR Flash Controller */ +#define IRQ_DMA5 45 /* DMA Channel 5 */ +#define IRQ_DMA6 46 /* DMA Channel 6 */ +#define IRQ_UART2 47 /* UART 2 */ +#define IRQ_RTC 48 /* RTC Interrupt */ +#define IRQ_RTCSM 49 /* RTC Second/Minute Update Interrupt */ +#define IRQ_UART3 50 /* UART 3 */ +#define IRQ_DMA7 51 /* DMA Channel 7 */ +#define IRQ_EXT5 52 /* External Interrupt 5 */ +#define IRQ_EXT6 53 /* External Interrupt 6 */ +#define IRQ_EXT7 54 /* External Interrupt 7 */ +#define IRQ_CIR 55 /* CIR */ +#define IRQ_SIC0 56 /* SIC IRQ0 */ +#define IRQ_SIC1 57 /* SIC IRQ1 */ +#define IRQ_SIC2 58 /* SIC IRQ2 */ +#define IRQ_SIC3 59 /* SIC IRQ3 */ +#define IRQ_SIC4 60 /* SIC IRQ4 */ +#define IRQ_SIC5 61 /* SIC IRQ5 */ +#define IRQ_SIC6 62 /* SIC IRQ6 */ +#define IRQ_SIC7 63 /* SIC IRQ7 */ + /* Reserved */ +#define IRQ_JPEGDEC 65 /* JPEG Decoder */ +#define IRQ_SAE 66 /* SAE (?) */ + /* Reserved */ +#define IRQ_VPU 79 /* Video Processing Unit */ +#define IRQ_VPP 80 /* Video Post-Processor */ +#define IRQ_VID 81 /* Video Digital Input Interface */ +#define IRQ_SPU 82 /* SPU (?) */ +#define IRQ_PIP 83 /* PIP Error */ +#define IRQ_GE 84 /* Graphic Engine */ +#define IRQ_GOV 85 /* Graphic Overlay Engine */ +#define IRQ_DVO 86 /* Digital Video Output */ + /* Reserved */ +#define IRQ_DMA8 92 /* DMA Channel 8 */ +#define IRQ_DMA9 93 /* DMA Channel 9 */ +#define IRQ_DMA10 94 /* DMA Channel 10 */ +#define IRQ_DMA11 95 /* DMA Channel 11 */ +#define IRQ_DMA12 96 /* DMA Channel 12 */ +#define IRQ_DMA13 97 /* DMA Channel 13 */ +#define IRQ_DMA14 98 /* DMA Channel 14 */ +#define IRQ_DMA15 99 /* DMA Channel 15 */ + /* Reserved */ +#define IRQ_GOVW 111 /* GOVW (?) */ +#define IRQ_GOVRSDSCD 112 /* GOVR SDSCD (?) */ +#define IRQ_GOVRSDMIF 113 /* GOVR SDMIF (?) */ +#define IRQ_GOVRHDSCD 114 /* GOVR HDSCD (?) */ +#define IRQ_GOVRHDMIF 115 /* GOVR HDMIF (?) */ + +#define WM8505_NR_IRQS 116 diff --git a/arch/arm/mach-vt8500/include/mach/wm8505_regs.h b/arch/arm/mach-vt8500/include/mach/wm8505_regs.h new file mode 100644 index 00000000000..df1550941ef --- /dev/null +++ b/arch/arm/mach-vt8500/include/mach/wm8505_regs.h @@ -0,0 +1,78 @@ +/* + * arch/arm/mach-vt8500/include/mach/wm8505_regs.h + * + * Copyright (C) 2010 Alexey Charkov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARM_ARCH_WM8505_REGS_H +#define __ASM_ARM_ARCH_WM8505_REGS_H + +/* WM8505 Registers Map */ + +#define WM8505_REGS_START_PHYS 0xd8000000 /* Start of MMIO registers */ +#define WM8505_REGS_START_VIRT 0xf8000000 /* Virtual mapping start */ + +#define WM8505_DDR_BASE 0xd8000400 /* 1k DDR/DDR2 Memory + Controller */ +#define WM8505_DMA_BASE 0xd8001800 /* 1k DMA Controller */ +#define WM8505_VDMA_BASE 0xd8001c00 /* 1k VDMA */ +#define WM8505_SFLASH_BASE 0xd8002000 /* 1k Serial Flash Memory + Controller */ +#define WM8505_ETHER_BASE 0xd8004000 /* 1k Ethernet MAC 0 */ +#define WM8505_CIPHER_BASE 0xd8006000 /* 4k Cipher */ +#define WM8505_USB_BASE 0xd8007000 /* 2k USB 2.0 Host */ +# define WM8505_EHCI_BASE 0xd8007100 /* EHCI */ +# define WM8505_UHCI_BASE 0xd8007301 /* UHCI */ +#define WM8505_PS2_BASE 0xd8008800 /* 1k PS/2 */ +#define WM8505_NAND_BASE 0xd8009000 /* 1k NAND Controller */ +#define WM8505_NOR_BASE 0xd8009400 /* 1k NOR Controller */ +#define WM8505_SDMMC_BASE 0xd800a000 /* 1k SD/MMC Controller */ +#define WM8505_VPU_BASE 0xd8050000 /* 256 VPU */ +#define WM8505_GOV_BASE 0xd8050300 /* 256 GOV */ +#define WM8505_GEGEA_BASE 0xd8050400 /* 768 GE/GE Alpha Mixing */ +#define WM8505_GOVR_BASE 0xd8050800 /* 512 GOVR (frambuffer) */ +#define WM8505_VID_BASE 0xd8050a00 /* 256 VID */ +#define WM8505_SCL_BASE 0xd8050d00 /* 256 SCL */ +#define WM8505_VPP_BASE 0xd8050f00 /* 256 VPP */ +#define WM8505_JPEGDEC_BASE 0xd80fe000 /* 4k JPEG Decoder */ +#define WM8505_RTC_BASE 0xd8100000 /* 64k RTC */ +#define WM8505_GPIO_BASE 0xd8110000 /* 64k GPIO Configuration */ +#define WM8505_SCC_BASE 0xd8120000 /* 64k System Configuration*/ +#define WM8505_PMC_BASE 0xd8130000 /* 64k PMC Configuration */ +#define WM8505_IC_BASE 0xd8140000 /* 64k Interrupt Controller*/ +#define WM8505_SIC_BASE 0xd8150000 /* 64k Secondary IC */ +#define WM8505_UART0_BASE 0xd8200000 /* 64k UART 0 */ +#define WM8505_UART2_BASE 0xd8210000 /* 64k UART 2 */ +#define WM8505_PWM_BASE 0xd8220000 /* 64k PWM Configuration */ +#define WM8505_SPI0_BASE 0xd8240000 /* 64k SPI 0 */ +#define WM8505_SPI1_BASE 0xd8250000 /* 64k SPI 1 */ +#define WM8505_KEYPAD_BASE 0xd8260000 /* 64k Keypad control */ +#define WM8505_CIR_BASE 0xd8270000 /* 64k CIR */ +#define WM8505_I2C0_BASE 0xd8280000 /* 64k I2C 0 */ +#define WM8505_AC97_BASE 0xd8290000 /* 64k AC97 */ +#define WM8505_SPI2_BASE 0xd82a0000 /* 64k SPI 2 */ +#define WM8505_UART1_BASE 0xd82b0000 /* 64k UART 1 */ +#define WM8505_UART3_BASE 0xd82c0000 /* 64k UART 3 */ +#define WM8505_I2C1_BASE 0xd8320000 /* 64k I2C 1 */ +#define WM8505_I2S_BASE 0xd8330000 /* 64k I2S */ +#define WM8505_UART4_BASE 0xd8370000 /* 64k UART 4 */ +#define WM8505_UART5_BASE 0xd8380000 /* 64k UART 5 */ + +#define WM8505_REGS_END_PHYS 0xd838ffff /* End of MMIO registers */ +#define WM8505_REGS_LENGTH (WM8505_REGS_END_PHYS \ + - WM8505_REGS_START_PHYS + 1) + +#endif diff --git a/arch/arm/mach-vt8500/irq.c b/arch/arm/mach-vt8500/irq.c new file mode 100644 index 00000000000..5f4ddde4f02 --- /dev/null +++ b/arch/arm/mach-vt8500/irq.c @@ -0,0 +1,177 @@ +/* + * arch/arm/mach-vt8500/irq.c + * + * Copyright (C) 2010 Alexey Charkov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include + +#include + +#include "devices.h" + +#define VT8500_IC_DCTR 0x40 /* Destination control + register, 64*u8 */ +#define VT8500_INT_ENABLE (1 << 3) +#define VT8500_TRIGGER_HIGH (0 << 4) +#define VT8500_TRIGGER_RISING (1 << 4) +#define VT8500_TRIGGER_FALLING (2 << 4) +#define VT8500_EDGE ( VT8500_TRIGGER_RISING \ + | VT8500_TRIGGER_FALLING) +#define VT8500_IC_STATUS 0x80 /* Interrupt status, 2*u32 */ + +static void __iomem *ic_regbase; +static void __iomem *sic_regbase; + +static void vt8500_irq_mask(unsigned int irq) +{ + void __iomem *base = ic_regbase; + u8 edge; + + if (irq >= 64) { + base = sic_regbase; + irq -= 64; + } + edge = readb(base + VT8500_IC_DCTR + irq) & VT8500_EDGE; + if (edge) { + void __iomem *stat_reg = base + VT8500_IC_STATUS + + (irq < 32 ? 0 : 4); + unsigned status = readl(stat_reg); + + status |= (1 << (irq & 0x1f)); + writel(status, stat_reg); + } else { + u8 dctr = readb(base + VT8500_IC_DCTR + irq); + + dctr &= ~VT8500_INT_ENABLE; + writeb(dctr, base + VT8500_IC_DCTR + irq); + } +} + +static void vt8500_irq_unmask(unsigned int irq) +{ + void __iomem *base = ic_regbase; + u8 dctr; + + if (irq >= 64) { + base = sic_regbase; + irq -= 64; + } + dctr = readb(base + VT8500_IC_DCTR + irq); + dctr |= VT8500_INT_ENABLE; + writeb(dctr, base + VT8500_IC_DCTR + irq); +} + +static int vt8500_irq_set_type(unsigned int irq, unsigned int flow_type) +{ + void __iomem *base = ic_regbase; + unsigned int orig_irq = irq; + u8 dctr; + + if (irq >= 64) { + base = sic_regbase; + irq -= 64; + } + + dctr = readb(base + VT8500_IC_DCTR + irq); + dctr &= ~VT8500_EDGE; + + switch (flow_type) { + case IRQF_TRIGGER_LOW: + return -EINVAL; + case IRQF_TRIGGER_HIGH: + dctr |= VT8500_TRIGGER_HIGH; + irq_desc[orig_irq].handle_irq = handle_level_irq; + break; + case IRQF_TRIGGER_FALLING: + dctr |= VT8500_TRIGGER_FALLING; + irq_desc[orig_irq].handle_irq = handle_edge_irq; + break; + case IRQF_TRIGGER_RISING: + dctr |= VT8500_TRIGGER_RISING; + irq_desc[orig_irq].handle_irq = handle_edge_irq; + break; + } + writeb(dctr, base + VT8500_IC_DCTR + irq); + + return 0; +} + +static struct irq_chip vt8500_irq_chip = { + .name = "vt8500", + .ack = vt8500_irq_mask, + .mask = vt8500_irq_mask, + .unmask = vt8500_irq_unmask, + .set_type = vt8500_irq_set_type, +}; + +void __init vt8500_init_irq(void) +{ + unsigned int i; + + ic_regbase = ioremap(wmt_ic_base, SZ_64K); + + if (ic_regbase) { + /* Enable rotating priority for IRQ */ + writel((1 << 6), ic_regbase + 0x20); + writel(0, ic_regbase + 0x24); + + for (i = 0; i < wmt_nr_irqs; i++) { + /* Disable all interrupts and route them to IRQ */ + writeb(0x00, ic_regbase + VT8500_IC_DCTR + i); + + set_irq_chip(i, &vt8500_irq_chip); + set_irq_handler(i, handle_level_irq); + set_irq_flags(i, IRQF_VALID); + } + } else { + printk(KERN_ERR "Unable to remap the Interrupt Controller registers, not enabling IRQs!\n"); + } +} + +void __init wm8505_init_irq(void) +{ + unsigned int i; + + ic_regbase = ioremap(wmt_ic_base, SZ_64K); + sic_regbase = ioremap(wmt_sic_base, SZ_64K); + + if (ic_regbase && sic_regbase) { + /* Enable rotating priority for IRQ */ + writel((1 << 6), ic_regbase + 0x20); + writel(0, ic_regbase + 0x24); + writel((1 << 6), sic_regbase + 0x20); + writel(0, sic_regbase + 0x24); + + for (i = 0; i < wmt_nr_irqs; i++) { + /* Disable all interrupts and route them to IRQ */ + if (i < 64) + writeb(0x00, ic_regbase + VT8500_IC_DCTR + i); + else + writeb(0x00, sic_regbase + VT8500_IC_DCTR + + i - 64); + + set_irq_chip(i, &vt8500_irq_chip); + set_irq_handler(i, handle_level_irq); + set_irq_flags(i, IRQF_VALID); + } + } else { + printk(KERN_ERR "Unable to remap the Interrupt Controller registers, not enabling IRQs!\n"); + } +} diff --git a/arch/arm/mach-vt8500/pwm.c b/arch/arm/mach-vt8500/pwm.c new file mode 100644 index 00000000000..8ad825e9359 --- /dev/null +++ b/arch/arm/mach-vt8500/pwm.c @@ -0,0 +1,265 @@ +/* + * arch/arm/mach-vt8500/pwm.c + * + * Copyright (C) 2010 Alexey Charkov + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define VT8500_NR_PWMS 4 + +static DEFINE_MUTEX(pwm_lock); +static LIST_HEAD(pwm_list); + +struct pwm_device { + struct list_head node; + struct platform_device *pdev; + + const char *label; + + void __iomem *regbase; + + unsigned int use_count; + unsigned int pwm_id; +}; + +#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t) +static inline void pwm_busy_wait(void __iomem *reg, u8 bitmask) +{ + int loops = msecs_to_loops(10); + while ((readb(reg) & bitmask) && --loops) + cpu_relax(); + + if (unlikely(!loops)) + pr_warning("Waiting for status bits 0x%x to clear timed out\n", + bitmask); +} + +int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) +{ + unsigned long long c; + unsigned long period_cycles, prescale, pv, dc; + + if (pwm == NULL || period_ns == 0 || duty_ns > period_ns) + return -EINVAL; + + c = 25000000/2; /* wild guess --- need to implement clocks */ + c = c * period_ns; + do_div(c, 1000000000); + period_cycles = c; + + if (period_cycles < 1) + period_cycles = 1; + prescale = (period_cycles - 1) / 4096; + pv = period_cycles / (prescale + 1) - 1; + if (pv > 4095) + pv = 4095; + + if (prescale > 1023) + return -EINVAL; + + c = (unsigned long long)pv * duty_ns; + do_div(c, period_ns); + dc = c; + + pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 1)); + writel(prescale, pwm->regbase + 0x4 + (pwm->pwm_id << 4)); + + pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 2)); + writel(pv, pwm->regbase + 0x8 + (pwm->pwm_id << 4)); + + pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 3)); + writel(dc, pwm->regbase + 0xc + (pwm->pwm_id << 4)); + + return 0; +} +EXPORT_SYMBOL(pwm_config); + +int pwm_enable(struct pwm_device *pwm) +{ + pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 0)); + writel(5, pwm->regbase + (pwm->pwm_id << 4)); + return 0; +} +EXPORT_SYMBOL(pwm_enable); + +void pwm_disable(struct pwm_device *pwm) +{ + pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 0)); + writel(0, pwm->regbase + (pwm->pwm_id << 4)); +} +EXPORT_SYMBOL(pwm_disable); + +struct pwm_device *pwm_request(int pwm_id, const char *label) +{ + struct pwm_device *pwm; + int found = 0; + + mutex_lock(&pwm_lock); + + list_for_each_entry(pwm, &pwm_list, node) { + if (pwm->pwm_id == pwm_id) { + found = 1; + break; + } + } + + if (found) { + if (pwm->use_count == 0) { + pwm->use_count++; + pwm->label = label; + } else { + pwm = ERR_PTR(-EBUSY); + } + } else { + pwm = ERR_PTR(-ENOENT); + } + + mutex_unlock(&pwm_lock); + return pwm; +} +EXPORT_SYMBOL(pwm_request); + +void pwm_free(struct pwm_device *pwm) +{ + mutex_lock(&pwm_lock); + + if (pwm->use_count) { + pwm->use_count--; + pwm->label = NULL; + } else { + pr_warning("PWM device already freed\n"); + } + + mutex_unlock(&pwm_lock); +} +EXPORT_SYMBOL(pwm_free); + +static inline void __add_pwm(struct pwm_device *pwm) +{ + mutex_lock(&pwm_lock); + list_add_tail(&pwm->node, &pwm_list); + mutex_unlock(&pwm_lock); +} + +static int __devinit pwm_probe(struct platform_device *pdev) +{ + struct pwm_device *pwms; + struct resource *r; + int ret = 0; + int i; + + pwms = kzalloc(sizeof(struct pwm_device) * VT8500_NR_PWMS, GFP_KERNEL); + if (pwms == NULL) { + dev_err(&pdev->dev, "failed to allocate memory\n"); + return -ENOMEM; + } + + for (i = 0; i < VT8500_NR_PWMS; i++) { + pwms[i].use_count = 0; + pwms[i].pwm_id = i; + pwms[i].pdev = pdev; + } + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (r == NULL) { + dev_err(&pdev->dev, "no memory resource defined\n"); + ret = -ENODEV; + goto err_free; + } + + r = request_mem_region(r->start, resource_size(r), pdev->name); + if (r == NULL) { + dev_err(&pdev->dev, "failed to request memory resource\n"); + ret = -EBUSY; + goto err_free; + } + + pwms[0].regbase = ioremap(r->start, resource_size(r)); + if (pwms[0].regbase == NULL) { + dev_err(&pdev->dev, "failed to ioremap() registers\n"); + ret = -ENODEV; + goto err_free_mem; + } + + for (i = 1; i < VT8500_NR_PWMS; i++) + pwms[i].regbase = pwms[0].regbase; + + for (i = 0; i < VT8500_NR_PWMS; i++) + __add_pwm(&pwms[i]); + + platform_set_drvdata(pdev, pwms); + return 0; + +err_free_mem: + release_mem_region(r->start, resource_size(r)); +err_free: + kfree(pwms); + return ret; +} + +static int __devexit pwm_remove(struct platform_device *pdev) +{ + struct pwm_device *pwms; + struct resource *r; + int i; + + pwms = platform_get_drvdata(pdev); + if (pwms == NULL) + return -ENODEV; + + mutex_lock(&pwm_lock); + + for (i = 0; i < VT8500_NR_PWMS; i++) + list_del(&pwms[i].node); + mutex_unlock(&pwm_lock); + + iounmap(pwms[0].regbase); + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(r->start, resource_size(r)); + + kfree(pwms); + return 0; +} + +static struct platform_driver pwm_driver = { + .driver = { + .name = "vt8500-pwm", + .owner = THIS_MODULE, + }, + .probe = pwm_probe, + .remove = __devexit_p(pwm_remove), +}; + +static int __init pwm_init(void) +{ + return platform_driver_register(&pwm_driver); +} +arch_initcall(pwm_init); + +static void __exit pwm_exit(void) +{ + platform_driver_unregister(&pwm_driver); +} +module_exit(pwm_exit); + +MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-vt8500/timer.c b/arch/arm/mach-vt8500/timer.c new file mode 100644 index 00000000000..d5376c592ab --- /dev/null +++ b/arch/arm/mach-vt8500/timer.c @@ -0,0 +1,155 @@ +/* + * arch/arm/mach-vt8500/timer.c + * + * Copyright (C) 2010 Alexey Charkov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +#include + +#include "devices.h" + +#define VT8500_TIMER_OFFSET 0x0100 +#define TIMER_MATCH_VAL 0x0000 +#define TIMER_COUNT_VAL 0x0010 +#define TIMER_STATUS_VAL 0x0014 +#define TIMER_IER_VAL 0x001c /* interrupt enable */ +#define TIMER_CTRL_VAL 0x0020 +#define TIMER_AS_VAL 0x0024 /* access status */ +#define TIMER_COUNT_R_ACTIVE (1 << 5) /* not ready for read */ +#define TIMER_COUNT_W_ACTIVE (1 << 4) /* not ready for write */ +#define TIMER_MATCH_W_ACTIVE (1 << 0) /* not ready for write */ +#define VT8500_TIMER_HZ 3000000 + +#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t) + +static void __iomem *regbase; + +static cycle_t vt8500_timer_read(struct clocksource *cs) +{ + int loops = msecs_to_loops(10); + writel(3, regbase + TIMER_CTRL_VAL); + while ((readl((regbase + TIMER_AS_VAL)) & TIMER_COUNT_R_ACTIVE) + && --loops) + cpu_relax(); + return readl(regbase + TIMER_COUNT_VAL); +} + +struct clocksource clocksource = { + .name = "vt8500_timer", + .rating = 200, + .read = vt8500_timer_read, + .mask = CLOCKSOURCE_MASK(32), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static int vt8500_timer_set_next_event(unsigned long cycles, + struct clock_event_device *evt) +{ + int loops = msecs_to_loops(10); + cycle_t alarm = clocksource.read(&clocksource) + cycles; + while ((readl(regbase + TIMER_AS_VAL) & TIMER_MATCH_W_ACTIVE) + && --loops) + cpu_relax(); + writel((unsigned long)alarm, regbase + TIMER_MATCH_VAL); + + if ((signed)(alarm - clocksource.read(&clocksource)) <= 16) + return -ETIME; + + writel(1, regbase + TIMER_IER_VAL); + + return 0; +} + +static void vt8500_timer_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + switch (mode) { + case CLOCK_EVT_MODE_RESUME: + case CLOCK_EVT_MODE_PERIODIC: + break; + case CLOCK_EVT_MODE_ONESHOT: + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + writel(readl(regbase + TIMER_CTRL_VAL) | 1, + regbase + TIMER_CTRL_VAL); + writel(0, regbase + TIMER_IER_VAL); + break; + } +} + +struct clock_event_device clockevent = { + .name = "vt8500_timer", + .features = CLOCK_EVT_FEAT_ONESHOT, + .rating = 200, + .set_next_event = vt8500_timer_set_next_event, + .set_mode = vt8500_timer_set_mode, +}; + +static irqreturn_t vt8500_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = dev_id; + writel(0xf, regbase + TIMER_STATUS_VAL); + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +struct irqaction irq = { + .name = "vt8500_timer", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = vt8500_timer_interrupt, + .dev_id = &clockevent, +}; + +static void __init vt8500_timer_init(void) +{ + regbase = ioremap(wmt_pmc_base + VT8500_TIMER_OFFSET, 0x28); + if (!regbase) + printk(KERN_ERR "vt8500_timer_init: failed to map MMIO registers\n"); + + writel(1, regbase + TIMER_CTRL_VAL); + writel(0xf, regbase + TIMER_STATUS_VAL); + writel(~0, regbase + TIMER_MATCH_VAL); + + if (clocksource_register_hz(&clocksource, VT8500_TIMER_HZ)) + printk(KERN_ERR "vt8500_timer_init: clocksource_register failed for %s\n", + clocksource.name); + + clockevents_calc_mult_shift(&clockevent, VT8500_TIMER_HZ, 4); + + /* copy-pasted from mach-msm; no idea */ + clockevent.max_delta_ns = + clockevent_delta2ns(0xf0000000, &clockevent); + clockevent.min_delta_ns = clockevent_delta2ns(4, &clockevent); + clockevent.cpumask = cpumask_of(0); + + if (setup_irq(wmt_timer_irq, &irq)) + printk(KERN_ERR "vt8500_timer_init: setup_irq failed for %s\n", + clockevent.name); + clockevents_register_device(&clockevent); +} + +struct sys_timer vt8500_timer = { + .init = vt8500_timer_init +}; diff --git a/arch/arm/mach-vt8500/wm8505_7in.c b/arch/arm/mach-vt8500/wm8505_7in.c new file mode 100644 index 00000000000..e73aadbcafd --- /dev/null +++ b/arch/arm/mach-vt8500/wm8505_7in.c @@ -0,0 +1,77 @@ +/* + * arch/arm/mach-vt8500/wm8505_7in.c + * + * Copyright (C) 2010 Alexey Charkov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include + +#include +#include + +#include "devices.h" + +static void __iomem *pmc_hiber; + +static struct platform_device *devices[] __initdata = { + &vt8500_device_uart0, + &vt8500_device_ehci, + &vt8500_device_wm8505_fb, + &vt8500_device_ge_rops, + &vt8500_device_pwm, + &vt8500_device_pwmbl, + &vt8500_device_rtc, +}; + +static void vt8500_power_off(void) +{ + local_irq_disable(); + writew(5, pmc_hiber); + asm("mcr%? p15, 0, %0, c7, c0, 4" : : "r" (0)); +} + +void __init wm8505_7in_init(void) +{ +#ifdef CONFIG_FB_WM8505 + void __iomem *gpio_mux_reg = ioremap(wmt_gpio_base + 0x200, 4); + if (gpio_mux_reg) { + writel(readl(gpio_mux_reg) | 0x80000000, gpio_mux_reg); + iounmap(gpio_mux_reg); + } else { + printk(KERN_ERR "Could not remap the GPIO mux register, display may not work properly!\n"); + } +#endif + pmc_hiber = ioremap(wmt_pmc_base + 0x12, 2); + if (pmc_hiber) + pm_power_off = &vt8500_power_off; + else + printk(KERN_ERR "PMC Hibernation register could not be remapped, not enabling power off!\n"); + + wm8505_set_resources(); + platform_add_devices(devices, ARRAY_SIZE(devices)); + vt8500_gpio_init(); +} + +MACHINE_START(WM8505_7IN_NETBOOK, "WM8505 7-inch generic netbook") + .boot_params = 0x00000100, + .reserve = wm8505_reserve_mem, + .map_io = wm8505_map_io, + .init_irq = wm8505_init_irq, + .timer = &vt8500_timer, + .init_machine = wm8505_7in_init, +MACHINE_END -- cgit v1.2.3-18-g5258 From 3f25c9ccb7409e6f61c11e7828c0ddb54ab1cb7b Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 24 Jan 2011 10:09:02 +0900 Subject: ASoC: sh: fsi-hdmi: Add FSI port and HDMI selection This patch add platform_device_id which can control PortA/PortB for FSI2-HDMI from platform data. Signed-off-by: Kuninori Morimoto Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- arch/arm/mach-shmobile/board-ap4evb.c | 5 +++++ arch/arm/mach-shmobile/board-mackerel.c | 5 +++++ 2 files changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index d503a74e30e..920ed81f1c6 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -781,6 +781,10 @@ static struct platform_device hdmi_device = { }, }; +static struct platform_device fsi_hdmi_device = { + .name = "sh_fsi2_b_hdmi", +}; + static long ap4evb_clk_optimize(unsigned long target, unsigned long *best_freq, unsigned long *parent_freq) { @@ -934,6 +938,7 @@ static struct platform_device *ap4evb_devices[] __initdata = { &usb1_host_device, &fsi_device, &fsi_ak4643_device, + &fsi_hdmi_device, &sh_mmcif_device, &lcdc1_device, &lcdc_device, diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 425962d5b29..aa4bcc34704 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -400,6 +400,10 @@ static struct platform_device hdmi_device = { }, }; +static struct platform_device fsi_hdmi_device = { + .name = "sh_fsi2_b_hdmi", +}; + static int __init hdmi_init_pm_clock(void) { struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick"); @@ -920,6 +924,7 @@ static struct platform_device *mackerel_devices[] __initdata = { &leds_device, &fsi_device, &fsi_ak4643_device, + &fsi_hdmi_device, &sdhi0_device, #if !defined(CONFIG_MMC_SH_MMCIF) &sdhi1_device, -- cgit v1.2.3-18-g5258 From 95c34f831f0e06cda6dc0a26b4f693ed105c394d Mon Sep 17 00:00:00 2001 From: Nick Bowler Date: Fri, 21 Jan 2011 15:51:06 +0100 Subject: ARM: 6633/1: vexpress: register platform PATA device. The compactflash device on this platform is not usable simply because it is never registered with the kernel. Fix that up. Signed-off-by: Nick Bowler Signed-off-by: Russell King --- arch/arm/Kconfig | 1 + arch/arm/mach-vexpress/v2m.c | 25 +++++++++++++++++++++++++ 2 files changed, 26 insertions(+) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5cff165b7eb..70a017042ef 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -269,6 +269,7 @@ config ARCH_VEXPRESS select GENERIC_CLOCKEVENTS select HAVE_CLK select HAVE_SCHED_CLOCK + select HAVE_PATA_PLATFORM select ICST select PLAT_VERSATILE help diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 1edae65a0e7..f35d646a1bf 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -7,6 +7,7 @@ #include #include #include +#include #include #include #include @@ -249,6 +250,29 @@ static struct platform_device v2m_flash_device = { .dev.platform_data = &v2m_flash_data, }; +static struct pata_platform_info v2m_pata_data = { + .ioport_shift = 2, +}; + +static struct resource v2m_pata_resources[] = { + { + .start = V2M_CF, + .end = V2M_CF + 0xff, + .flags = IORESOURCE_MEM, + }, { + .start = V2M_CF + 0x100, + .end = V2M_CF + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device v2m_cf_device = { + .name = "pata_platform", + .id = -1, + .resource = v2m_pata_resources, + .num_resources = ARRAY_SIZE(v2m_pata_resources), + .dev.platform_data = &v2m_pata_data, +}; static unsigned int v2m_mmci_status(struct device *dev) { @@ -363,6 +387,7 @@ static int __init v2m_init(void) platform_device_register(&v2m_pcie_i2c_device); platform_device_register(&v2m_ddc_i2c_device); platform_device_register(&v2m_flash_device); + platform_device_register(&v2m_cf_device); platform_device_register(&v2m_eth_device); platform_device_register(&v2m_usb_device); -- cgit v1.2.3-18-g5258 From f221a9be2e511502b43b009fd83e748017ea117d Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Wed, 19 Jan 2011 13:50:03 -0700 Subject: ARM: tegra: Add Harmony sound platform data type Signed-off-by: Stephen Warren Acked-by: Colin Cross Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- arch/arm/mach-tegra/include/mach/harmony_audio.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) create mode 100644 arch/arm/mach-tegra/include/mach/harmony_audio.h (limited to 'arch') diff --git a/arch/arm/mach-tegra/include/mach/harmony_audio.h b/arch/arm/mach-tegra/include/mach/harmony_audio.h new file mode 100644 index 00000000000..5c46391ea7e --- /dev/null +++ b/arch/arm/mach-tegra/include/mach/harmony_audio.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-tegra/include/mach/harmony_audio.h + * + * Copyright 2011 NVIDIA, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +struct harmony_audio_platform_data { + int gpio_spkr_en; +}; -- cgit v1.2.3-18-g5258 From 9599ec0471deae24044241e2173090d2cbc0e899 Mon Sep 17 00:00:00 2001 From: Fenghua Yu Date: Mon, 17 Jan 2011 17:39:15 -0800 Subject: x86-64, mem: Convert memmove() to assembly file and fix return value bug memmove_64.c only implements memmove() function which is completely written in inline assembly code. Therefore it doesn't make sense to keep the assembly code in .c file. Currently memmove() doesn't store return value to rax. This may cause issue if caller uses the return value. The patch fixes this issue. Signed-off-by: Fenghua Yu LKML-Reference: <1295314755-6625-1-git-send-email-fenghua.yu@intel.com> Signed-off-by: H. Peter Anvin --- arch/x86/kernel/x8664_ksyms_64.c | 1 + arch/x86/lib/memmove_64.S | 197 +++++++++++++++++++++++++++++++++++++++ arch/x86/lib/memmove_64.c | 192 -------------------------------------- 3 files changed, 198 insertions(+), 192 deletions(-) create mode 100644 arch/x86/lib/memmove_64.S delete mode 100644 arch/x86/lib/memmove_64.c (limited to 'arch') diff --git a/arch/x86/kernel/x8664_ksyms_64.c b/arch/x86/kernel/x8664_ksyms_64.c index 1b950d151e5..9796c2f3d07 100644 --- a/arch/x86/kernel/x8664_ksyms_64.c +++ b/arch/x86/kernel/x8664_ksyms_64.c @@ -52,6 +52,7 @@ extern void *__memcpy(void *, const void *, __kernel_size_t); EXPORT_SYMBOL(memset); EXPORT_SYMBOL(memcpy); EXPORT_SYMBOL(__memcpy); +EXPORT_SYMBOL(memmove); EXPORT_SYMBOL(empty_zero_page); #ifndef CONFIG_PARAVIRT diff --git a/arch/x86/lib/memmove_64.S b/arch/x86/lib/memmove_64.S new file mode 100644 index 00000000000..0ecb8433e5a --- /dev/null +++ b/arch/x86/lib/memmove_64.S @@ -0,0 +1,197 @@ +/* + * Normally compiler builtins are used, but sometimes the compiler calls out + * of line code. Based on asm-i386/string.h. + * + * This assembly file is re-written from memmove_64.c file. + * - Copyright 2011 Fenghua Yu + */ +#define _STRING_C +#include +#include + +#undef memmove + +/* + * Implement memmove(). This can handle overlap between src and dst. + * + * Input: + * rdi: dest + * rsi: src + * rdx: count + * + * Output: + * rax: dest + */ +ENTRY(memmove) + CFI_STARTPROC + /* Handle more 32bytes in loop */ + mov %rdi, %rax + cmp $0x20, %rdx + jb 1f + + /* Decide forward/backward copy mode */ + cmp %rdi, %rsi + jb 2f + + /* + * movsq instruction have many startup latency + * so we handle small size by general register. + */ + cmp $680, %rdx + jb 3f + /* + * movsq instruction is only good for aligned case. + */ + + cmpb %dil, %sil + je 4f +3: + sub $0x20, %rdx + /* + * We gobble 32byts forward in each loop. + */ +5: + sub $0x20, %rdx + movq 0*8(%rsi), %r11 + movq 1*8(%rsi), %r10 + movq 2*8(%rsi), %r9 + movq 3*8(%rsi), %r8 + leaq 4*8(%rsi), %rsi + + movq %r11, 0*8(%rdi) + movq %r10, 1*8(%rdi) + movq %r9, 2*8(%rdi) + movq %r8, 3*8(%rdi) + leaq 4*8(%rdi), %rdi + jae 5b + addq $0x20, %rdx + jmp 1f + /* + * Handle data forward by movsq. + */ + .p2align 4 +4: + movq %rdx, %rcx + movq -8(%rsi, %rdx), %r11 + lea -8(%rdi, %rdx), %r10 + shrq $3, %rcx + rep movsq + movq %r11, (%r10) + jmp 13f + /* + * Handle data backward by movsq. + */ + .p2align 4 +7: + movq %rdx, %rcx + movq (%rsi), %r11 + movq %rdi, %r10 + leaq -8(%rsi, %rdx), %rsi + leaq -8(%rdi, %rdx), %rdi + shrq $3, %rcx + std + rep movsq + cld + movq %r11, (%r10) + jmp 13f + + /* + * Start to prepare for backward copy. + */ + .p2align 4 +2: + cmp $680, %rdx + jb 6f + cmp %dil, %sil + je 7b +6: + /* + * Calculate copy position to tail. + */ + addq %rdx, %rsi + addq %rdx, %rdi + subq $0x20, %rdx + /* + * We gobble 32byts backward in each loop. + */ +8: + subq $0x20, %rdx + movq -1*8(%rsi), %r11 + movq -2*8(%rsi), %r10 + movq -3*8(%rsi), %r9 + movq -4*8(%rsi), %r8 + leaq -4*8(%rsi), %rsi + + movq %r11, -1*8(%rdi) + movq %r10, -2*8(%rdi) + movq %r9, -3*8(%rdi) + movq %r8, -4*8(%rdi) + leaq -4*8(%rdi), %rdi + jae 8b + /* + * Calculate copy position to head. + */ + addq $0x20, %rdx + subq %rdx, %rsi + subq %rdx, %rdi +1: + cmpq $16, %rdx + jb 9f + /* + * Move data from 16 bytes to 31 bytes. + */ + movq 0*8(%rsi), %r11 + movq 1*8(%rsi), %r10 + movq -2*8(%rsi, %rdx), %r9 + movq -1*8(%rsi, %rdx), %r8 + movq %r11, 0*8(%rdi) + movq %r10, 1*8(%rdi) + movq %r9, -2*8(%rdi, %rdx) + movq %r8, -1*8(%rdi, %rdx) + jmp 13f + .p2align 4 +9: + cmpq $8, %rdx + jb 10f + /* + * Move data from 8 bytes to 15 bytes. + */ + movq 0*8(%rsi), %r11 + movq -1*8(%rsi, %rdx), %r10 + movq %r11, 0*8(%rdi) + movq %r10, -1*8(%rdi, %rdx) + jmp 13f +10: + cmpq $4, %rdx + jb 11f + /* + * Move data from 4 bytes to 7 bytes. + */ + movl (%rsi), %r11d + movl -4(%rsi, %rdx), %r10d + movl %r11d, (%rdi) + movl %r10d, -4(%rdi, %rdx) + jmp 13f +11: + cmp $2, %rdx + jb 12f + /* + * Move data from 2 bytes to 3 bytes. + */ + movw (%rsi), %r11w + movw -2(%rsi, %rdx), %r10w + movw %r11w, (%rdi) + movw %r10w, -2(%rdi, %rdx) + jmp 13f +12: + cmp $1, %rdx + jb 13f + /* + * Move data for 1 byte. + */ + movb (%rsi), %r11b + movb %r11b, (%rdi) +13: + retq + CFI_ENDPROC +ENDPROC(memmove) diff --git a/arch/x86/lib/memmove_64.c b/arch/x86/lib/memmove_64.c deleted file mode 100644 index 6d0f0ec41b3..00000000000 --- a/arch/x86/lib/memmove_64.c +++ /dev/null @@ -1,192 +0,0 @@ -/* Normally compiler builtins are used, but sometimes the compiler calls out - of line code. Based on asm-i386/string.h. - */ -#define _STRING_C -#include -#include - -#undef memmove -void *memmove(void *dest, const void *src, size_t count) -{ - unsigned long d0,d1,d2,d3,d4,d5,d6,d7; - char *ret; - - __asm__ __volatile__( - /* Handle more 32bytes in loop */ - "mov %2, %3\n\t" - "cmp $0x20, %0\n\t" - "jb 1f\n\t" - - /* Decide forward/backward copy mode */ - "cmp %2, %1\n\t" - "jb 2f\n\t" - - /* - * movsq instruction have many startup latency - * so we handle small size by general register. - */ - "cmp $680, %0\n\t" - "jb 3f\n\t" - /* - * movsq instruction is only good for aligned case. - */ - "cmpb %%dil, %%sil\n\t" - "je 4f\n\t" - "3:\n\t" - "sub $0x20, %0\n\t" - /* - * We gobble 32byts forward in each loop. - */ - "5:\n\t" - "sub $0x20, %0\n\t" - "movq 0*8(%1), %4\n\t" - "movq 1*8(%1), %5\n\t" - "movq 2*8(%1), %6\n\t" - "movq 3*8(%1), %7\n\t" - "leaq 4*8(%1), %1\n\t" - - "movq %4, 0*8(%2)\n\t" - "movq %5, 1*8(%2)\n\t" - "movq %6, 2*8(%2)\n\t" - "movq %7, 3*8(%2)\n\t" - "leaq 4*8(%2), %2\n\t" - "jae 5b\n\t" - "addq $0x20, %0\n\t" - "jmp 1f\n\t" - /* - * Handle data forward by movsq. - */ - ".p2align 4\n\t" - "4:\n\t" - "movq %0, %8\n\t" - "movq -8(%1, %0), %4\n\t" - "lea -8(%2, %0), %5\n\t" - "shrq $3, %8\n\t" - "rep movsq\n\t" - "movq %4, (%5)\n\t" - "jmp 13f\n\t" - /* - * Handle data backward by movsq. - */ - ".p2align 4\n\t" - "7:\n\t" - "movq %0, %8\n\t" - "movq (%1), %4\n\t" - "movq %2, %5\n\t" - "leaq -8(%1, %0), %1\n\t" - "leaq -8(%2, %0), %2\n\t" - "shrq $3, %8\n\t" - "std\n\t" - "rep movsq\n\t" - "cld\n\t" - "movq %4, (%5)\n\t" - "jmp 13f\n\t" - - /* - * Start to prepare for backward copy. - */ - ".p2align 4\n\t" - "2:\n\t" - "cmp $680, %0\n\t" - "jb 6f \n\t" - "cmp %%dil, %%sil\n\t" - "je 7b \n\t" - "6:\n\t" - /* - * Calculate copy position to tail. - */ - "addq %0, %1\n\t" - "addq %0, %2\n\t" - "subq $0x20, %0\n\t" - /* - * We gobble 32byts backward in each loop. - */ - "8:\n\t" - "subq $0x20, %0\n\t" - "movq -1*8(%1), %4\n\t" - "movq -2*8(%1), %5\n\t" - "movq -3*8(%1), %6\n\t" - "movq -4*8(%1), %7\n\t" - "leaq -4*8(%1), %1\n\t" - - "movq %4, -1*8(%2)\n\t" - "movq %5, -2*8(%2)\n\t" - "movq %6, -3*8(%2)\n\t" - "movq %7, -4*8(%2)\n\t" - "leaq -4*8(%2), %2\n\t" - "jae 8b\n\t" - /* - * Calculate copy position to head. - */ - "addq $0x20, %0\n\t" - "subq %0, %1\n\t" - "subq %0, %2\n\t" - "1:\n\t" - "cmpq $16, %0\n\t" - "jb 9f\n\t" - /* - * Move data from 16 bytes to 31 bytes. - */ - "movq 0*8(%1), %4\n\t" - "movq 1*8(%1), %5\n\t" - "movq -2*8(%1, %0), %6\n\t" - "movq -1*8(%1, %0), %7\n\t" - "movq %4, 0*8(%2)\n\t" - "movq %5, 1*8(%2)\n\t" - "movq %6, -2*8(%2, %0)\n\t" - "movq %7, -1*8(%2, %0)\n\t" - "jmp 13f\n\t" - ".p2align 4\n\t" - "9:\n\t" - "cmpq $8, %0\n\t" - "jb 10f\n\t" - /* - * Move data from 8 bytes to 15 bytes. - */ - "movq 0*8(%1), %4\n\t" - "movq -1*8(%1, %0), %5\n\t" - "movq %4, 0*8(%2)\n\t" - "movq %5, -1*8(%2, %0)\n\t" - "jmp 13f\n\t" - "10:\n\t" - "cmpq $4, %0\n\t" - "jb 11f\n\t" - /* - * Move data from 4 bytes to 7 bytes. - */ - "movl (%1), %4d\n\t" - "movl -4(%1, %0), %5d\n\t" - "movl %4d, (%2)\n\t" - "movl %5d, -4(%2, %0)\n\t" - "jmp 13f\n\t" - "11:\n\t" - "cmp $2, %0\n\t" - "jb 12f\n\t" - /* - * Move data from 2 bytes to 3 bytes. - */ - "movw (%1), %4w\n\t" - "movw -2(%1, %0), %5w\n\t" - "movw %4w, (%2)\n\t" - "movw %5w, -2(%2, %0)\n\t" - "jmp 13f\n\t" - "12:\n\t" - "cmp $1, %0\n\t" - "jb 13f\n\t" - /* - * Move data for 1 byte. - */ - "movb (%1), %4b\n\t" - "movb %4b, (%2)\n\t" - "13:\n\t" - : "=&d" (d0), "=&S" (d1), "=&D" (d2), "=&a" (ret) , - "=r"(d3), "=r"(d4), "=r"(d5), "=r"(d6), "=&c" (d7) - :"0" (count), - "1" (src), - "2" (dest) - :"memory"); - - return ret; - -} -EXPORT_SYMBOL(memmove); -- cgit v1.2.3-18-g5258 From 1f6b5dd41f3b38739f0275b1539c57b34c5b22a3 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Tue, 25 Jan 2011 16:54:22 +0100 Subject: ARM: mxs: acknowledge gpio irq MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes a machine hang after a gpio irq triggered. Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-mxs/gpio.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-mxs/gpio.c b/arch/arm/mach-mxs/gpio.c index d7ad7a61366..cb0c0e83a52 100644 --- a/arch/arm/mach-mxs/gpio.c +++ b/arch/arm/mach-mxs/gpio.c @@ -139,6 +139,8 @@ static void mxs_gpio_irq_handler(u32 irq, struct irq_desc *desc) struct mxs_gpio_port *port = (struct mxs_gpio_port *)get_irq_data(irq); u32 gpio_irq_no_base = port->virtual_irq_start; + desc->irq_data.chip->irq_ack(&desc->irq_data); + irq_stat = __raw_readl(port->base + PINCTRL_IRQSTAT(port->id)) & __raw_readl(port->base + PINCTRL_IRQEN(port->id)); -- cgit v1.2.3-18-g5258 From d518573de63fb119e5e9a3137386544671387681 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Mon, 24 Jan 2011 16:05:40 +0100 Subject: x86, amd: Normalize compute unit IDs on multi-node processors On multi-node CPUs we don't need the socket wide compute unit ID but the node-wide compute unit ID. Thus we need to normalize the value. This is similar to what we do with cpu_core_id. A compute unit is then identified by physical_package_id, node_id, and compute_unit_id. Signed-off-by: Andreas Herrmann LKML-Reference: <1295881543-572552-2-git-send-email-hans.rosenfeld@amd.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/amd.c | 8 ++++++-- arch/x86/kernel/smpboot.c | 1 + 2 files changed, 7 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 7c7bedb83c5..990cc486158 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -261,7 +261,7 @@ static int __cpuinit nearby_node(int apicid) #ifdef CONFIG_X86_HT static void __cpuinit amd_get_topology(struct cpuinfo_x86 *c) { - u32 nodes; + u32 nodes, cores_per_cu; u8 node_id; int cpu = smp_processor_id(); @@ -276,6 +276,7 @@ static void __cpuinit amd_get_topology(struct cpuinfo_x86 *c) /* get compute unit information */ smp_num_siblings = ((ebx >> 8) & 3) + 1; c->compute_unit_id = ebx & 0xff; + cores_per_cu = ((ebx >> 8) & 3) + 1; } else if (cpu_has(c, X86_FEATURE_NODEID_MSR)) { u64 value; @@ -288,15 +289,18 @@ static void __cpuinit amd_get_topology(struct cpuinfo_x86 *c) /* fixup multi-node processor information */ if (nodes > 1) { u32 cores_per_node; + u32 cus_per_node; set_cpu_cap(c, X86_FEATURE_AMD_DCM); cores_per_node = c->x86_max_cores / nodes; + cus_per_node = cores_per_node / cores_per_cu; /* store NodeID, use llc_shared_map to store sibling info */ per_cpu(cpu_llc_id, cpu) = node_id; /* core id to be in range from 0 to (cores_per_node - 1) */ - c->cpu_core_id = c->cpu_core_id % cores_per_node; + c->cpu_core_id %= cores_per_node; + c->compute_unit_id %= cus_per_node; } } #endif diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 0cbe8c0b35e..fbaa2229af5 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -414,6 +414,7 @@ void __cpuinit set_cpu_sibling_map(int cpu) if (cpu_has(c, X86_FEATURE_TOPOEXT)) { if (c->phys_proc_id == o->phys_proc_id && + per_cpu(cpu_llc_id, cpu) == per_cpu(cpu_llc_id, i) && c->compute_unit_id == o->compute_unit_id) link_thread_siblings(cpu, i); } else if (c->phys_proc_id == o->phys_proc_id && -- cgit v1.2.3-18-g5258 From b453de02b786c63b8928ec822401468131db0a9b Mon Sep 17 00:00:00 2001 From: Hans Rosenfeld Date: Mon, 24 Jan 2011 16:05:41 +0100 Subject: x86, amd: Enable L3 cache index disable on family 0x15 AMD family 0x15 CPUs support L3 cache index disable, so enable it on them. Signed-off-by: Hans Rosenfeld Cc: LKML-Reference: <1295881543-572552-3-git-send-email-hans.rosenfeld@amd.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/amd_nb.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/amd_nb.c b/arch/x86/kernel/amd_nb.c index 0a99f7198bc..a4f394c8e05 100644 --- a/arch/x86/kernel/amd_nb.c +++ b/arch/x86/kernel/amd_nb.c @@ -85,6 +85,9 @@ int amd_cache_northbridges(void) boot_cpu_data.x86_mask >= 0x1)) amd_northbridges.flags |= AMD_NB_L3_INDEX_DISABLE; + if (boot_cpu_data.x86 == 0x15) + amd_northbridges.flags |= AMD_NB_L3_INDEX_DISABLE; + return 0; } EXPORT_SYMBOL_GPL(amd_cache_northbridges); -- cgit v1.2.3-18-g5258 From 41b2610c3443e6c4760e61fc10eef73f96f9f6a5 Mon Sep 17 00:00:00 2001 From: Hans Rosenfeld Date: Mon, 24 Jan 2011 16:05:42 +0100 Subject: x86, amd: Extend AMD northbridge caching code to support "Link Control" devices "Link Control" devices (NB function 4) will be used by L3 cache partitioning on family 0x15. Signed-off-by: Hans Rosenfeld Cc: LKML-Reference: <1295881543-572552-4-git-send-email-hans.rosenfeld@amd.com> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/amd_nb.h | 1 + arch/x86/kernel/amd_nb.c | 11 +++++++++-- 2 files changed, 10 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/amd_nb.h b/arch/x86/include/asm/amd_nb.h index 64dc82ee19f..3e7070071d7 100644 --- a/arch/x86/include/asm/amd_nb.h +++ b/arch/x86/include/asm/amd_nb.h @@ -26,6 +26,7 @@ extern void amd_get_nodes(struct bootnode *nodes); struct amd_northbridge { struct pci_dev *misc; + struct pci_dev *link; }; struct amd_northbridge_info { diff --git a/arch/x86/kernel/amd_nb.c b/arch/x86/kernel/amd_nb.c index a4f394c8e05..4ae9a961c33 100644 --- a/arch/x86/kernel/amd_nb.c +++ b/arch/x86/kernel/amd_nb.c @@ -20,6 +20,11 @@ struct pci_device_id amd_nb_misc_ids[] = { }; EXPORT_SYMBOL(amd_nb_misc_ids); +static struct pci_device_id amd_nb_link_ids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_LINK) }, + {} +}; + const struct amd_nb_bus_dev_range amd_nb_bus_dev_ranges[] __initconst = { { 0x00, 0x18, 0x20 }, { 0xff, 0x00, 0x20 }, @@ -45,7 +50,7 @@ int amd_cache_northbridges(void) { int i = 0; struct amd_northbridge *nb; - struct pci_dev *misc; + struct pci_dev *misc, *link; if (amd_nb_num()) return 0; @@ -64,10 +69,12 @@ int amd_cache_northbridges(void) amd_northbridges.nb = nb; amd_northbridges.num = i; - misc = NULL; + link = misc = NULL; for (i = 0; i != amd_nb_num(); i++) { node_to_amd_nb(i)->misc = misc = next_northbridge(misc, amd_nb_misc_ids); + node_to_amd_nb(i)->link = link = + next_northbridge(link, amd_nb_link_ids); } /* some CPU families (e.g. family 0x11) do not support GART */ -- cgit v1.2.3-18-g5258 From 376e9c5848abef8c72c09bd89f2f7ee128caa104 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 24 Jan 2011 17:05:25 +0800 Subject: ARM: mxs: add initial pm support This is a very initial pm support and basically does nothing. With this pm support entry, drivers can start testing their own pm functions. Signed-off-by: Shawn Guo Signed-off-by: Sascha Hauer --- arch/arm/mach-mxs/Makefile | 1 + arch/arm/mach-mxs/pm.c | 43 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 44 insertions(+) create mode 100644 arch/arm/mach-mxs/pm.c (limited to 'arch') diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile index df501a8340f..6b26f02e72a 100644 --- a/arch/arm/mach-mxs/Makefile +++ b/arch/arm/mach-mxs/Makefile @@ -2,6 +2,7 @@ obj-y := clock.o devices.o gpio.o icoll.o iomux.o system.o timer.o obj-$(CONFIG_MXS_OCOTP) += ocotp.o +obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_SOC_IMX23) += clock-mx23.o mm-mx23.o obj-$(CONFIG_SOC_IMX28) += clock-mx28.o mm-mx28.o diff --git a/arch/arm/mach-mxs/pm.c b/arch/arm/mach-mxs/pm.c new file mode 100644 index 00000000000..fb042da29bd --- /dev/null +++ b/arch/arm/mach-mxs/pm.c @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include + +static int mxs_suspend_enter(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_MEM: + arch_idle(); + break; + + default: + return -EINVAL; + } + return 0; +} + +static struct platform_suspend_ops mxs_suspend_ops = { + .enter = mxs_suspend_enter, + .valid = suspend_valid_only_mem, +}; + +static int __init mxs_pm_init(void) +{ + suspend_set_ops(&mxs_suspend_ops); + return 0; +} +device_initcall(mxs_pm_init); -- cgit v1.2.3-18-g5258 From b3d7336db553d318e7ec042eb50a70d307013339 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 21 Jan 2011 15:29:44 -0800 Subject: x86: Move llc_shared_map out of cpu_info cpu_info is already with per_cpu, We can take llc_shared_map out of cpu_info, and declare it as per_cpu variable directly. So later referencing could be simple and directly instead of diving to find cpu_info at first. Also could make smp_store_cpu_info() much simple to avoid to do save and restore trick. Signed-off-by: Yinghai Lu Cc: Hans Rosenfeld Cc: Alok N Kataria Cc: Stephen Hemminger Cc: Hans J. Koch Cc: Tejun Heo Cc: Borislav Petkov Cc: Andreas Herrmann Cc: Robert Richter Cc: Suresh Siddha LKML-Reference: <4D3A16E8.5020608@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/processor.h | 4 ---- arch/x86/include/asm/smp.h | 7 +++++++ arch/x86/kernel/cpu/intel_cacheinfo.c | 4 ++-- arch/x86/kernel/cpu/mcheck/mce_amd.c | 7 ++----- arch/x86/kernel/smpboot.c | 38 +++++++++-------------------------- 5 files changed, 21 insertions(+), 39 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index 45636cefa18..4c25ab48257 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -94,10 +94,6 @@ struct cpuinfo_x86 { int x86_cache_alignment; /* In bytes */ int x86_power; unsigned long loops_per_jiffy; -#ifdef CONFIG_SMP - /* cpus sharing the last level cache: */ - cpumask_var_t llc_shared_map; -#endif /* cpuid returned max cores value: */ u16 x86_max_cores; u16 apicid; diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h index 4c2f63c7fc1..3597825a311 100644 --- a/arch/x86/include/asm/smp.h +++ b/arch/x86/include/asm/smp.h @@ -23,6 +23,8 @@ extern unsigned int num_processors; DECLARE_PER_CPU(cpumask_var_t, cpu_sibling_map); DECLARE_PER_CPU(cpumask_var_t, cpu_core_map); +/* cpus sharing the last level cache: */ +DECLARE_PER_CPU(cpumask_var_t, cpu_llc_shared_map); DECLARE_PER_CPU(u16, cpu_llc_id); DECLARE_PER_CPU(int, cpu_number); @@ -36,6 +38,11 @@ static inline struct cpumask *cpu_core_mask(int cpu) return per_cpu(cpu_core_map, cpu); } +static inline struct cpumask *cpu_llc_shared_mask(int cpu) +{ + return per_cpu(cpu_llc_shared_map, cpu); +} + DECLARE_EARLY_PER_CPU(u16, x86_cpu_to_apicid); DECLARE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid); diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index ec2c19a7b8e..5419a263ebd 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -732,11 +732,11 @@ static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index) struct cpuinfo_x86 *c = &cpu_data(cpu); if ((index == 3) && (c->x86_vendor == X86_VENDOR_AMD)) { - for_each_cpu(i, c->llc_shared_map) { + for_each_cpu(i, cpu_llc_shared_mask(cpu)) { if (!per_cpu(ici_cpuid4_info, i)) continue; this_leaf = CPUID4_INFO_IDX(i, index); - for_each_cpu(sibling, c->llc_shared_map) { + for_each_cpu(sibling, cpu_llc_shared_mask(cpu)) { if (!cpu_online(sibling)) continue; set_bit(sibling, this_leaf->shared_cpu_map); diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c index 5bf2fac52ac..167f97b5596 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_amd.c +++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c @@ -527,15 +527,12 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank) int i, err = 0; struct threshold_bank *b = NULL; char name[32]; -#ifdef CONFIG_SMP - struct cpuinfo_x86 *c = &cpu_data(cpu); -#endif sprintf(name, "threshold_bank%i", bank); #ifdef CONFIG_SMP if (cpu_data(cpu).cpu_core_id && shared_bank[bank]) { /* symlink */ - i = cpumask_first(c->llc_shared_map); + i = cpumask_first(cpu_llc_shared_mask(cpu)); /* first core not up yet */ if (cpu_data(i).cpu_core_id) @@ -555,7 +552,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank) if (err) goto out; - cpumask_copy(b->cpus, c->llc_shared_map); + cpumask_copy(b->cpus, cpu_llc_shared_mask(cpu)); per_cpu(threshold_banks, cpu)[bank] = b; goto out; diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 0cbe8c0b35e..d396155f436 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -130,6 +130,8 @@ EXPORT_PER_CPU_SYMBOL(cpu_sibling_map); DEFINE_PER_CPU(cpumask_var_t, cpu_core_map); EXPORT_PER_CPU_SYMBOL(cpu_core_map); +DEFINE_PER_CPU(cpumask_var_t, cpu_llc_shared_map); + /* Per CPU bogomips and other parameters */ DEFINE_PER_CPU_SHARED_ALIGNED(struct cpuinfo_x86, cpu_info); EXPORT_PER_CPU_SYMBOL(cpu_info); @@ -355,23 +357,6 @@ notrace static void __cpuinit start_secondary(void *unused) cpu_idle(); } -#ifdef CONFIG_CPUMASK_OFFSTACK -/* In this case, llc_shared_map is a pointer to a cpumask. */ -static inline void copy_cpuinfo_x86(struct cpuinfo_x86 *dst, - const struct cpuinfo_x86 *src) -{ - struct cpumask *llc = dst->llc_shared_map; - *dst = *src; - dst->llc_shared_map = llc; -} -#else -static inline void copy_cpuinfo_x86(struct cpuinfo_x86 *dst, - const struct cpuinfo_x86 *src) -{ - *dst = *src; -} -#endif /* CONFIG_CPUMASK_OFFSTACK */ - /* * The bootstrap kernel entry code has set these up. Save them for * a given CPU @@ -381,7 +366,7 @@ void __cpuinit smp_store_cpu_info(int id) { struct cpuinfo_x86 *c = &cpu_data(id); - copy_cpuinfo_x86(c, &boot_cpu_data); + *c = boot_cpu_data; c->cpu_index = id; if (id != 0) identify_secondary_cpu(c); @@ -389,15 +374,12 @@ void __cpuinit smp_store_cpu_info(int id) static void __cpuinit link_thread_siblings(int cpu1, int cpu2) { - struct cpuinfo_x86 *c1 = &cpu_data(cpu1); - struct cpuinfo_x86 *c2 = &cpu_data(cpu2); - cpumask_set_cpu(cpu1, cpu_sibling_mask(cpu2)); cpumask_set_cpu(cpu2, cpu_sibling_mask(cpu1)); cpumask_set_cpu(cpu1, cpu_core_mask(cpu2)); cpumask_set_cpu(cpu2, cpu_core_mask(cpu1)); - cpumask_set_cpu(cpu1, c2->llc_shared_map); - cpumask_set_cpu(cpu2, c1->llc_shared_map); + cpumask_set_cpu(cpu1, cpu_llc_shared_mask(cpu2)); + cpumask_set_cpu(cpu2, cpu_llc_shared_mask(cpu1)); } @@ -425,7 +407,7 @@ void __cpuinit set_cpu_sibling_map(int cpu) cpumask_set_cpu(cpu, cpu_sibling_mask(cpu)); } - cpumask_set_cpu(cpu, c->llc_shared_map); + cpumask_set_cpu(cpu, cpu_llc_shared_mask(cpu)); if (__this_cpu_read(cpu_info.x86_max_cores) == 1) { cpumask_copy(cpu_core_mask(cpu), cpu_sibling_mask(cpu)); @@ -436,8 +418,8 @@ void __cpuinit set_cpu_sibling_map(int cpu) for_each_cpu(i, cpu_sibling_setup_mask) { if (per_cpu(cpu_llc_id, cpu) != BAD_APICID && per_cpu(cpu_llc_id, cpu) == per_cpu(cpu_llc_id, i)) { - cpumask_set_cpu(i, c->llc_shared_map); - cpumask_set_cpu(cpu, cpu_data(i).llc_shared_map); + cpumask_set_cpu(i, cpu_llc_shared_mask(cpu)); + cpumask_set_cpu(cpu, cpu_llc_shared_mask(i)); } if (c->phys_proc_id == cpu_data(i).phys_proc_id) { cpumask_set_cpu(i, cpu_core_mask(cpu)); @@ -476,7 +458,7 @@ const struct cpumask *cpu_coregroup_mask(int cpu) !(cpu_has(c, X86_FEATURE_AMD_DCM))) return cpu_core_mask(cpu); else - return c->llc_shared_map; + return cpu_llc_shared_mask(cpu); } static void impress_friends(void) @@ -1103,7 +1085,7 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus) for_each_possible_cpu(i) { zalloc_cpumask_var(&per_cpu(cpu_sibling_map, i), GFP_KERNEL); zalloc_cpumask_var(&per_cpu(cpu_core_map, i), GFP_KERNEL); - zalloc_cpumask_var(&cpu_data(i).llc_shared_map, GFP_KERNEL); + zalloc_cpumask_var(&per_cpu(cpu_llc_shared_map, i), GFP_KERNEL); } set_cpu_sibling_map(0); -- cgit v1.2.3-18-g5258 From 792363d2beceb1c7d865e517fa9939c8b8c1442a Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 21 Jan 2011 15:29:54 -0800 Subject: x86: Don't copy per_cpu cpuinfo for BSP two times smp_store_cpu_info(0) will do that. Signed-off-by: Yinghai Lu Cc: Suresh Siddha Cc: Tejun Heo Cc: Borislav Petkov LKML-Reference: <4D3A16F2.5090902@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/kernel/smpboot.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index d396155f436..a7a3d1acc63 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -1071,13 +1071,13 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus) preempt_disable(); smp_cpu_index_default(); - memcpy(__this_cpu_ptr(&cpu_info), &boot_cpu_data, sizeof(cpu_info)); - cpumask_copy(cpu_callin_mask, cpumask_of(0)); - mb(); + /* * Setup boot CPU information */ smp_store_cpu_info(0); /* Final full version of the data */ + cpumask_copy(cpu_callin_mask, cpumask_of(0)); + mb(); #ifdef CONFIG_X86_32 boot_cpu_logical_apicid = logical_smp_processor_id(); #endif -- cgit v1.2.3-18-g5258 From c48730056f69db30c075236f4ee2bc9d3f4f9985 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 26 Jan 2011 12:12:50 +0100 Subject: arm/omap: use system_wq in mailbox With cmwq, there's no reason to use a separate workqueue for mailbox. Use the system_wq instead. mbox->rxq->work is sync flushed in omap_mbox_fini() to make sure it's not running on any cpu, which makes sure that no mbox work is running when omap_mbox_exit() is entered. Signed-off-by: Tejun Heo Acked-by: Hari Kanigeri Cc: Tony Lindgren Cc: linux-omap@vger.kernel.org --- arch/arm/plat-omap/mailbox.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c index 459b319a9fa..4c9d44c4db4 100644 --- a/arch/arm/plat-omap/mailbox.c +++ b/arch/arm/plat-omap/mailbox.c @@ -32,7 +32,6 @@ #include -static struct workqueue_struct *mboxd; static struct omap_mbox **mboxes; static int mbox_configured; @@ -197,7 +196,7 @@ static void __mbox_rx_interrupt(struct omap_mbox *mbox) /* no more messages in the fifo. clear IRQ source. */ ack_mbox_irq(mbox, IRQ_RX); nomem: - queue_work(mboxd, &mbox->rxq->work); + schedule_work(&mbox->rxq->work); } static irqreturn_t mbox_interrupt(int irq, void *p) @@ -307,7 +306,7 @@ static void omap_mbox_fini(struct omap_mbox *mbox) if (!--mbox->use_count) { free_irq(mbox->irq, mbox); tasklet_kill(&mbox->txq->tasklet); - flush_work(&mbox->rxq->work); + flush_work_sync(&mbox->rxq->work); mbox_queue_free(mbox->txq); mbox_queue_free(mbox->rxq); } @@ -406,10 +405,6 @@ static int __init omap_mbox_init(void) if (err) return err; - mboxd = create_workqueue("mboxd"); - if (!mboxd) - return -ENOMEM; - /* kfifo size sanity check: alignment and minimal size */ mbox_kfifo_size = ALIGN(mbox_kfifo_size, sizeof(mbox_msg_t)); mbox_kfifo_size = max_t(unsigned int, mbox_kfifo_size, @@ -421,7 +416,6 @@ subsys_initcall(omap_mbox_init); static void __exit omap_mbox_exit(void) { - destroy_workqueue(mboxd); class_unregister(&omap_mbox_class); } module_exit(omap_mbox_exit); -- cgit v1.2.3-18-g5258 From f17c13ca52d5c5a6a164536244a6debb8cd17983 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 24 Jan 2011 10:43:19 +0900 Subject: ASoC: sh: fsi: modify selection method of I2S/PCM/SPDIF format Current format selection of FSI-codecs depended on platform information for FSI, and chip default settings for codecs. It is not understandable/formal method. This patch modify FSI and FSI-codecs to use snd_soc_dai_set_fmt. But FSI can use I2S/PCM and SPDIF format today. It can be selected to I2S/PCM by snd_soc_dai_set_fmt, but can not select SPDIF. So, this patch change FSI platform information to have DAI/SPDIF mode. If platform selects DAI mode (default), FSI-codecs can select I2S/PCM by snd_soc_dai_set_fmt, and if it is SPDIF mode, FSI become SPDIF format. Signed-off-by: Kuninori Morimoto Acked-by: Paul Mundt Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- arch/arm/mach-shmobile/board-ag5evm.c | 8 -------- arch/arm/mach-shmobile/board-ap4evb.c | 6 ++---- arch/arm/mach-shmobile/board-mackerel.c | 6 ++---- arch/sh/boards/mach-ecovec24/setup.c | 4 +--- arch/sh/boards/mach-se/7724/setup.c | 4 +--- 5 files changed, 6 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index 9ee55e0fbeb..343362d0207 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -118,11 +118,6 @@ static struct platform_device keysc_device = { }; /* FSI A */ -static struct sh_fsi_platform_info fsi_info = { - .porta_flags = SH_FSI_OFMT(I2S) | - SH_FSI_IFMT(I2S), -}; - static struct resource fsi_resources[] = { [0] = { .name = "FSI", @@ -141,9 +136,6 @@ static struct platform_device fsi_device = { .id = -1, .num_resources = ARRAY_SIZE(fsi_resources), .resource = fsi_resources, - .dev = { - .platform_data = &fsi_info, - }, }; static struct resource sh_mmcif_resources[] = { diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 920ed81f1c6..17f528a76a1 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -673,14 +673,12 @@ static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable) } static struct sh_fsi_platform_info fsi_info = { - .porta_flags = SH_FSI_BRS_INV | - SH_FSI_OFMT(PCM) | - SH_FSI_IFMT(PCM), + .porta_flags = SH_FSI_BRS_INV, .portb_flags = SH_FSI_BRS_INV | SH_FSI_BRM_INV | SH_FSI_LRS_INV | - SH_FSI_OFMT(SPDIF), + SH_FSI_FMT_SPDIF, .set_rate = fsi_set_rate, }; diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index aa4bcc34704..73b8c90b507 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -614,14 +614,12 @@ fsi_set_rate_end: } static struct sh_fsi_platform_info fsi_info = { - .porta_flags = SH_FSI_BRS_INV | - SH_FSI_OFMT(PCM) | - SH_FSI_IFMT(PCM), + .porta_flags = SH_FSI_BRS_INV, .portb_flags = SH_FSI_BRS_INV | SH_FSI_BRM_INV | SH_FSI_LRS_INV | - SH_FSI_OFMT(SPDIF), + SH_FSI_FMT_SPDIF, .set_rate = fsi_set_rate, }; diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 037416f346c..b96b79b970b 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -723,9 +723,7 @@ static struct platform_device camera_devices[] = { /* FSI */ static struct sh_fsi_platform_info fsi_info = { - .portb_flags = SH_FSI_BRS_INV | - SH_FSI_OFMT(I2S) | - SH_FSI_IFMT(I2S), + .portb_flags = SH_FSI_BRS_INV, }; static struct resource fsi_resources[] = { diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index b4aef05dd8b..c8bcf6a19b5 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -286,9 +286,7 @@ static struct platform_device ceu1_device = { /* FSI */ /* change J20, J21, J22 pin to 1-2 connection to use slave mode */ static struct sh_fsi_platform_info fsi_info = { - .porta_flags = SH_FSI_BRS_INV | - SH_FSI_OFMT(PCM) | - SH_FSI_IFMT(PCM), + .porta_flags = SH_FSI_BRS_INV, }; static struct resource fsi_resources[] = { -- cgit v1.2.3-18-g5258 From d14dd7e20d5e526557f5d3cfef4046a642f80924 Mon Sep 17 00:00:00 2001 From: Ari Kauppi Date: Thu, 20 Jan 2011 13:57:19 -0500 Subject: ARM: oprofile: Fix backtraces in timer mode Always allow backtraces when using oprofile on ARM, even if a PMU isn't present. Restores functionality originally introduced in commit 1b7b56982fdcd9d85effd76f3928cf5d6eb26155 ("oprofile: Always allow backtraces on ARM") by Richard Purdie. It is not that obvious, but there is now only one oprofile_arch_init() function. So the .backtrace callback is available also in timer mode. Implemented by removing code and using stubs for oprofile_perf_{init, exit} provided by . This allows cleaning of other architecture specific implementations too. Cc: stable@kernel.org # 37.x Signed-off-by: Ari Kauppi Acked-by: Will Deacon Signed-off-by: Robert Richter --- arch/arm/oprofile/common.c | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c index 8aa974491df..2b663918c46 100644 --- a/arch/arm/oprofile/common.c +++ b/arch/arm/oprofile/common.c @@ -10,8 +10,6 @@ */ #include -#include -#include #include #include #include @@ -46,6 +44,7 @@ char *op_name_from_perf_id(void) return NULL; } } +#endif static int report_trace(struct stackframe *frame, void *d) { @@ -111,6 +110,7 @@ static void arm_backtrace(struct pt_regs * const regs, unsigned int depth) int __init oprofile_arch_init(struct oprofile_operations *ops) { + /* provide backtrace support also in timer mode: */ ops->backtrace = arm_backtrace; return oprofile_perf_init(ops); @@ -120,11 +120,3 @@ void __exit oprofile_arch_exit(void) { oprofile_perf_exit(); } -#else -int __init oprofile_arch_init(struct oprofile_operations *ops) -{ - pr_info("oprofile: hardware counters not available\n"); - return -ENODEV; -} -void __exit oprofile_arch_exit(void) {} -#endif /* CONFIG_HW_PERF_EVENTS */ -- cgit v1.2.3-18-g5258 From 617fcc98020bbc9492cacdef40423b758c02a9df Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 25 Jan 2011 16:40:01 -0800 Subject: OMAP3: PM: fix save secure RAM to restore MPU power state Currently, on HS/EMU devices, MPU power state forced to on during PM init by the save secure RAM code. Rather than forcing the state of MPU powerdomain to on, simply read the current value and restore it after the ROM code has run. This only affects the !CPUidle case since when CPUidle is enabled, the MPU power state is dynamically changed by CPUidle. In the !CPUidle case, MPU power state is initialized once at init and never touched. Acked-by: Tero Kristo Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm34xx.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 8cbbeade4b8..1916038b267 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -168,9 +168,10 @@ static void omap3_core_restore_context(void) * once during boot sequence, but this works as we are not using secure * services. */ -static void omap3_save_secure_ram_context(u32 target_mpu_state) +static void omap3_save_secure_ram_context(void) { u32 ret; + int mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm); if (omap_type() != OMAP2_DEVICE_TYPE_GP) { /* @@ -181,7 +182,7 @@ static void omap3_save_secure_ram_context(u32 target_mpu_state) pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON); ret = _omap_save_secure_sram((u32 *) __pa(omap3_secure_ram_storage)); - pwrdm_set_next_pwrst(mpu_pwrdm, target_mpu_state); + pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state); /* Following is for error tracking, it should not happen */ if (ret) { printk(KERN_ERR "save_secure_sram() returns %08x\n", @@ -1094,7 +1095,7 @@ static int __init omap3_pm_init(void) local_fiq_disable(); omap_dma_global_context_save(); - omap3_save_secure_ram_context(PWRDM_POWER_ON); + omap3_save_secure_ram_context(); omap_dma_global_context_restore(); local_irq_enable(); -- cgit v1.2.3-18-g5258 From 61bb46082775acd18c712607615a8b7dbeff7873 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 23 Jan 2011 15:10:51 +0100 Subject: alpha: Replace deprecated spinlock initialization SPIN_LOCK_UNLOCK is deprecated. Use the lockdep capable variant instead. Signed-off-by: Thomas Gleixner Cc: Matt Turner --- arch/alpha/include/asm/rwsem.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/alpha/include/asm/rwsem.h b/arch/alpha/include/asm/rwsem.h index 1570c0b5433..19c9cc7ed94 100644 --- a/arch/alpha/include/asm/rwsem.h +++ b/arch/alpha/include/asm/rwsem.h @@ -39,7 +39,7 @@ struct rw_semaphore { }; #define __RWSEM_INITIALIZER(name) \ - { RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \ + { RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \ LIST_HEAD_INIT((name).wait_list) } #define DECLARE_RWSEM(name) \ -- cgit v1.2.3-18-g5258 From e41c8ab174f47ed5ed10a365482d0d7b0e352beb Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 23 Jan 2011 15:14:15 +0100 Subject: cris: Replace deprecated spinlock initialization SPIN_LOCK_UNLOCK is deprecated. Use the lockdep capable variant instead. Signed-off-by: Thomas Gleixner Cc: Jesper Nilsson --- arch/cris/arch-v32/kernel/smp.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/cris/arch-v32/kernel/smp.c b/arch/cris/arch-v32/kernel/smp.c index 84fed3b4b07..4c9e3e1ba5d 100644 --- a/arch/cris/arch-v32/kernel/smp.c +++ b/arch/cris/arch-v32/kernel/smp.c @@ -26,7 +26,9 @@ #define FLUSH_ALL (void*)0xffffffff /* Vector of locks used for various atomic operations */ -spinlock_t cris_atomic_locks[] = { [0 ... LOCK_COUNT - 1] = SPIN_LOCK_UNLOCKED}; +spinlock_t cris_atomic_locks[] = { + [0 ... LOCK_COUNT - 1] = __SPIN_LOCK_UNLOCKED(cris_atomic_locks) +}; /* CPU masks */ cpumask_t phys_cpu_present_map = CPU_MASK_NONE; -- cgit v1.2.3-18-g5258 From 7424cdf77b1b2975d82619084f20f0055f715166 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 23 Jan 2011 15:16:35 +0100 Subject: mips: Replace deprecated spinlock initialization SPIN_LOCK_UNLOCK is deprecated. Use the lockdep capable variant instead. Signed-off-by: Thomas Gleixner Cc: Ralf Baechle --- arch/mips/kernel/vpe.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index 6a1fdfef8fd..ab52b7cf3b6 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -148,9 +148,9 @@ struct { spinlock_t tc_list_lock; struct list_head tc_list; /* Thread contexts */ } vpecontrol = { - .vpe_list_lock = SPIN_LOCK_UNLOCKED, + .vpe_list_lock = __SPIN_LOCK_UNLOCKED(vpe_list_lock), .vpe_list = LIST_HEAD_INIT(vpecontrol.vpe_list), - .tc_list_lock = SPIN_LOCK_UNLOCKED, + .tc_list_lock = __SPIN_LOCK_UNLOCKED(tc_list_lock), .tc_list = LIST_HEAD_INIT(vpecontrol.tc_list) }; -- cgit v1.2.3-18-g5258 From 24774fbdeab8f6ac05a19e81bd645b0f7e5d2bb7 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 23 Jan 2011 15:19:12 +0100 Subject: sparc: Replace deprecated spinlock initialization SPIN_LOCK_UNLOCK is deprecated. Use the lockdep capable variant instead. Signed-off-by: Thomas Gleixner Acked-by: David S. Miller --- arch/sparc/lib/atomic32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc/lib/atomic32.c b/arch/sparc/lib/atomic32.c index cbddeb38ffd..d3c7a12ad87 100644 --- a/arch/sparc/lib/atomic32.c +++ b/arch/sparc/lib/atomic32.c @@ -16,7 +16,7 @@ #define ATOMIC_HASH(a) (&__atomic_hash[(((unsigned long)a)>>8) & (ATOMIC_HASH_SIZE-1)]) spinlock_t __atomic_hash[ATOMIC_HASH_SIZE] = { - [0 ... (ATOMIC_HASH_SIZE-1)] = SPIN_LOCK_UNLOCKED + [0 ... (ATOMIC_HASH_SIZE-1)] = __SPIN_LOCK_UNLOCKED(__atomic_hash) }; #else /* SMP */ -- cgit v1.2.3-18-g5258 From 22e650045899011b028e40625bc73df9f3260bac Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 23 Jan 2011 15:21:25 +0100 Subject: um: Replace deprecated spinlock initialization SPIN_LOCK_UNLOCK is deprecated. Use the lockdep capable variant instead. Signed-off-by: Thomas Gleixner Cc: Jeff Dike --- arch/um/drivers/ubd_kern.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c index ba4a98ba39c..620f5b70957 100644 --- a/arch/um/drivers/ubd_kern.c +++ b/arch/um/drivers/ubd_kern.c @@ -185,7 +185,7 @@ struct ubd { .no_cow = 0, \ .shared = 0, \ .cow = DEFAULT_COW, \ - .lock = SPIN_LOCK_UNLOCKED, \ + .lock = __SPIN_LOCK_UNLOCKED(ubd_devs.lock), \ .request = NULL, \ .start_sg = 0, \ .end_sg = 0, \ -- cgit v1.2.3-18-g5258 From 235454c99851ba21038061b9acf38d1a636068c5 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 23 Jan 2011 15:23:14 +0100 Subject: xtensa: Replace deprecated spinlock initialization SPIN_LOCK_UNLOCK is deprecated. Use the lockdep capable variant instead. Signed-off-by: Thomas Gleixner Cc: Chris Zankel --- arch/xtensa/include/asm/rwsem.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/xtensa/include/asm/rwsem.h b/arch/xtensa/include/asm/rwsem.h index e39edf5c86f..9d32f687439 100644 --- a/arch/xtensa/include/asm/rwsem.h +++ b/arch/xtensa/include/asm/rwsem.h @@ -38,7 +38,7 @@ struct rw_semaphore { }; #define __RWSEM_INITIALIZER(name) \ - { RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \ + { RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \ LIST_HEAD_INIT((name).wait_list) } #define DECLARE_RWSEM(name) \ -- cgit v1.2.3-18-g5258 From c16a87ce063f79e0ec7d25ce2950e1bc6db03c72 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 26 Jan 2011 20:05:50 +0000 Subject: rwsem: Cleanup includes All rwsem implementations include the same headers. Include them from include/linux/rwsem.h Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra Cc: David Howells Cc: Benjamin Herrenschmidt Cc: Matt Turner Acked-by: Tony Luck Acked-by: Heiko Carstens Cc: Paul Mundt Acked-by: David Miller Cc: Chris Zankel LKML-Reference: <20110126195833.483520950@linutronix.de> --- arch/alpha/include/asm/rwsem.h | 4 ---- arch/ia64/include/asm/rwsem.h | 3 --- arch/powerpc/include/asm/rwsem.h | 5 ----- arch/s390/include/asm/rwsem.h | 5 ----- arch/sh/include/asm/rwsem.h | 5 ----- arch/sparc/include/asm/rwsem.h | 6 ------ arch/x86/include/asm/rwsem.h | 6 ------ arch/xtensa/include/asm/rwsem.h | 6 ------ 8 files changed, 40 deletions(-) (limited to 'arch') diff --git a/arch/alpha/include/asm/rwsem.h b/arch/alpha/include/asm/rwsem.h index 19c9cc7ed94..839a3fa2094 100644 --- a/arch/alpha/include/asm/rwsem.h +++ b/arch/alpha/include/asm/rwsem.h @@ -13,10 +13,6 @@ #ifdef __KERNEL__ #include -#include -#include - -struct rwsem_waiter; extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem); extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem); diff --git a/arch/ia64/include/asm/rwsem.h b/arch/ia64/include/asm/rwsem.h index 215d5454c7d..9bcf0792b01 100644 --- a/arch/ia64/include/asm/rwsem.h +++ b/arch/ia64/include/asm/rwsem.h @@ -25,9 +25,6 @@ #error "Please don't include directly, use instead." #endif -#include -#include - #include /* diff --git a/arch/powerpc/include/asm/rwsem.h b/arch/powerpc/include/asm/rwsem.h index 8447d89fbe7..c12abbe1d06 100644 --- a/arch/powerpc/include/asm/rwsem.h +++ b/arch/powerpc/include/asm/rwsem.h @@ -13,11 +13,6 @@ * by Paul Mackerras . */ -#include -#include -#include -#include - /* * the semaphore definition */ diff --git a/arch/s390/include/asm/rwsem.h b/arch/s390/include/asm/rwsem.h index 423fdda2322..9cc8592b33b 100644 --- a/arch/s390/include/asm/rwsem.h +++ b/arch/s390/include/asm/rwsem.h @@ -43,11 +43,6 @@ #ifdef __KERNEL__ -#include -#include - -struct rwsem_waiter; - extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *); extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *); extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *); diff --git a/arch/sh/include/asm/rwsem.h b/arch/sh/include/asm/rwsem.h index 06e2251a5e4..df6f34623c5 100644 --- a/arch/sh/include/asm/rwsem.h +++ b/arch/sh/include/asm/rwsem.h @@ -11,11 +11,6 @@ #endif #ifdef __KERNEL__ -#include -#include -#include -#include - /* * the semaphore definition */ diff --git a/arch/sparc/include/asm/rwsem.h b/arch/sparc/include/asm/rwsem.h index a2b4302869b..902d36bf150 100644 --- a/arch/sparc/include/asm/rwsem.h +++ b/arch/sparc/include/asm/rwsem.h @@ -12,12 +12,6 @@ #endif #ifdef __KERNEL__ - -#include -#include - -struct rwsem_waiter; - struct rw_semaphore { signed long count; #define RWSEM_UNLOCKED_VALUE 0x00000000L diff --git a/arch/x86/include/asm/rwsem.h b/arch/x86/include/asm/rwsem.h index d1e41b0f9b6..a626cff8604 100644 --- a/arch/x86/include/asm/rwsem.h +++ b/arch/x86/include/asm/rwsem.h @@ -37,14 +37,8 @@ #endif #ifdef __KERNEL__ - -#include -#include -#include #include -struct rwsem_waiter; - extern asmregparm struct rw_semaphore * rwsem_down_read_failed(struct rw_semaphore *sem); extern asmregparm struct rw_semaphore * diff --git a/arch/xtensa/include/asm/rwsem.h b/arch/xtensa/include/asm/rwsem.h index 9d32f687439..1be2102c648 100644 --- a/arch/xtensa/include/asm/rwsem.h +++ b/arch/xtensa/include/asm/rwsem.h @@ -16,12 +16,6 @@ #ifndef _LINUX_RWSEM_H #error "Please don't include directly, use instead." #endif - -#include -#include -#include -#include - /* * the semaphore definition */ -- cgit v1.2.3-18-g5258 From bde11efbc21ea84c3351464a422b467eaefabb9a Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 26 Jan 2011 20:05:53 +0000 Subject: x86: Cleanup rwsem_count_t typedef Remove the typedef which has no real reason to be there. Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra Cc: David Howells Cc: Benjamin Herrenschmidt Cc: Matt Turner Cc: Tony Luck Cc: Heiko Carstens Cc: Paul Mundt Cc: David Miller Cc: Chris Zankel LKML-Reference: <20110126195833.580335506@linutronix.de> --- arch/x86/include/asm/rwsem.h | 25 ++++++++++--------------- 1 file changed, 10 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/rwsem.h b/arch/x86/include/asm/rwsem.h index a626cff8604..c30206c2bbf 100644 --- a/arch/x86/include/asm/rwsem.h +++ b/arch/x86/include/asm/rwsem.h @@ -68,10 +68,8 @@ extern asmregparm struct rw_semaphore * #define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS #define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) -typedef signed long rwsem_count_t; - struct rw_semaphore { - rwsem_count_t count; + long count; spinlock_t wait_lock; struct list_head wait_list; #ifdef CONFIG_DEBUG_LOCK_ALLOC @@ -127,7 +125,7 @@ static inline void __down_read(struct rw_semaphore *sem) */ static inline int __down_read_trylock(struct rw_semaphore *sem) { - rwsem_count_t result, tmp; + long result, tmp; asm volatile("# beginning __down_read_trylock\n\t" " mov %0,%1\n\t" "1:\n\t" @@ -149,7 +147,7 @@ static inline int __down_read_trylock(struct rw_semaphore *sem) */ static inline void __down_write_nested(struct rw_semaphore *sem, int subclass) { - rwsem_count_t tmp; + long tmp; asm volatile("# beginning down_write\n\t" LOCK_PREFIX " xadd %1,(%2)\n\t" /* adds 0xffff0001, returns the old value */ @@ -174,9 +172,8 @@ static inline void __down_write(struct rw_semaphore *sem) */ static inline int __down_write_trylock(struct rw_semaphore *sem) { - rwsem_count_t ret = cmpxchg(&sem->count, - RWSEM_UNLOCKED_VALUE, - RWSEM_ACTIVE_WRITE_BIAS); + long ret = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE, + RWSEM_ACTIVE_WRITE_BIAS); if (ret == RWSEM_UNLOCKED_VALUE) return 1; return 0; @@ -187,7 +184,7 @@ static inline int __down_write_trylock(struct rw_semaphore *sem) */ static inline void __up_read(struct rw_semaphore *sem) { - rwsem_count_t tmp; + long tmp; asm volatile("# beginning __up_read\n\t" LOCK_PREFIX " xadd %1,(%2)\n\t" /* subtracts 1, returns the old value */ @@ -205,7 +202,7 @@ static inline void __up_read(struct rw_semaphore *sem) */ static inline void __up_write(struct rw_semaphore *sem) { - rwsem_count_t tmp; + long tmp; asm volatile("# beginning __up_write\n\t" LOCK_PREFIX " xadd %1,(%2)\n\t" /* subtracts 0xffff0001, returns the old value */ @@ -241,8 +238,7 @@ static inline void __downgrade_write(struct rw_semaphore *sem) /* * implement atomic add functionality */ -static inline void rwsem_atomic_add(rwsem_count_t delta, - struct rw_semaphore *sem) +static inline void rwsem_atomic_add(long delta, struct rw_semaphore *sem) { asm volatile(LOCK_PREFIX _ASM_ADD "%1,%0" : "+m" (sem->count) @@ -252,10 +248,9 @@ static inline void rwsem_atomic_add(rwsem_count_t delta, /* * implement exchange and add functionality */ -static inline rwsem_count_t rwsem_atomic_update(rwsem_count_t delta, - struct rw_semaphore *sem) +static inline long rwsem_atomic_update(long delta, struct rw_semaphore *sem) { - rwsem_count_t tmp = delta; + long tmp = delta; asm volatile(LOCK_PREFIX "xadd %0,%1" : "+r" (tmp), "+m" (sem->count) -- cgit v1.2.3-18-g5258 From 1c8ed640d918290ddc1de5ada02ef6686a733c9f Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 26 Jan 2011 20:05:56 +0000 Subject: rwsem: Move duplicate struct rwsem declaration to linux/rwsem.h The difference between these declarations is the data type of the count member and the lack of lockdep in some architectures/ long is equivivalent to signed long and the #ifdef guarded dep_map member does not hurt anyone. Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra Cc: David Howells Cc: Benjamin Herrenschmidt Cc: Matt Turner Acked-by: Tony Luck Acked-by: Heiko Carstens Cc: Paul Mundt Acked-by: David Miller Cc: Chris Zankel LKML-Reference: <20110126195833.679641914@linutronix.de> Signed-off-by: Thomas Gleixner --- arch/alpha/include/asm/rwsem.h | 8 -------- arch/ia64/include/asm/rwsem.h | 9 --------- arch/powerpc/include/asm/rwsem.h | 9 --------- arch/s390/include/asm/rwsem.h | 12 ------------ arch/sh/include/asm/rwsem.h | 12 +----------- arch/sparc/include/asm/rwsem.h | 9 +-------- arch/x86/include/asm/rwsem.h | 12 ------------ arch/xtensa/include/asm/rwsem.h | 9 +-------- 8 files changed, 3 insertions(+), 77 deletions(-) (limited to 'arch') diff --git a/arch/alpha/include/asm/rwsem.h b/arch/alpha/include/asm/rwsem.h index 839a3fa2094..3e5619ead29 100644 --- a/arch/alpha/include/asm/rwsem.h +++ b/arch/alpha/include/asm/rwsem.h @@ -19,20 +19,12 @@ extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem); extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *); extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem); -/* - * the semaphore definition - */ -struct rw_semaphore { - long count; #define RWSEM_UNLOCKED_VALUE 0x0000000000000000L #define RWSEM_ACTIVE_BIAS 0x0000000000000001L #define RWSEM_ACTIVE_MASK 0x00000000ffffffffL #define RWSEM_WAITING_BIAS (-0x0000000100000000L) #define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS #define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) - spinlock_t wait_lock; - struct list_head wait_list; -}; #define __RWSEM_INITIALIZER(name) \ { RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \ diff --git a/arch/ia64/include/asm/rwsem.h b/arch/ia64/include/asm/rwsem.h index 9bcf0792b01..1fe465804dc 100644 --- a/arch/ia64/include/asm/rwsem.h +++ b/arch/ia64/include/asm/rwsem.h @@ -27,15 +27,6 @@ #include -/* - * the semaphore definition - */ -struct rw_semaphore { - signed long count; - spinlock_t wait_lock; - struct list_head wait_list; -}; - #define RWSEM_UNLOCKED_VALUE __IA64_UL_CONST(0x0000000000000000) #define RWSEM_ACTIVE_BIAS (1L) #define RWSEM_ACTIVE_MASK (0xffffffffL) diff --git a/arch/powerpc/include/asm/rwsem.h b/arch/powerpc/include/asm/rwsem.h index c12abbe1d06..bc1acc22922 100644 --- a/arch/powerpc/include/asm/rwsem.h +++ b/arch/powerpc/include/asm/rwsem.h @@ -28,15 +28,6 @@ #define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS #define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) -struct rw_semaphore { - long count; - spinlock_t wait_lock; - struct list_head wait_list; -#ifdef CONFIG_DEBUG_LOCK_ALLOC - struct lockdep_map dep_map; -#endif -}; - #ifdef CONFIG_DEBUG_LOCK_ALLOC # define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname } #else diff --git a/arch/s390/include/asm/rwsem.h b/arch/s390/include/asm/rwsem.h index 9cc8592b33b..6e075f1d97b 100644 --- a/arch/s390/include/asm/rwsem.h +++ b/arch/s390/include/asm/rwsem.h @@ -49,18 +49,6 @@ extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *); extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *); extern struct rw_semaphore *rwsem_downgrade_write(struct rw_semaphore *); -/* - * the semaphore definition - */ -struct rw_semaphore { - signed long count; - spinlock_t wait_lock; - struct list_head wait_list; -#ifdef CONFIG_DEBUG_LOCK_ALLOC - struct lockdep_map dep_map; -#endif -}; - #ifndef __s390x__ #define RWSEM_UNLOCKED_VALUE 0x00000000 #define RWSEM_ACTIVE_BIAS 0x00000001 diff --git a/arch/sh/include/asm/rwsem.h b/arch/sh/include/asm/rwsem.h index df6f34623c5..dffc62589f7 100644 --- a/arch/sh/include/asm/rwsem.h +++ b/arch/sh/include/asm/rwsem.h @@ -11,23 +11,13 @@ #endif #ifdef __KERNEL__ -/* - * the semaphore definition - */ -struct rw_semaphore { - long count; + #define RWSEM_UNLOCKED_VALUE 0x00000000 #define RWSEM_ACTIVE_BIAS 0x00000001 #define RWSEM_ACTIVE_MASK 0x0000ffff #define RWSEM_WAITING_BIAS (-0x00010000) #define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS #define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) - spinlock_t wait_lock; - struct list_head wait_list; -#ifdef CONFIG_DEBUG_LOCK_ALLOC - struct lockdep_map dep_map; -#endif -}; #ifdef CONFIG_DEBUG_LOCK_ALLOC # define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname } diff --git a/arch/sparc/include/asm/rwsem.h b/arch/sparc/include/asm/rwsem.h index 902d36bf150..4c16d1de2ab 100644 --- a/arch/sparc/include/asm/rwsem.h +++ b/arch/sparc/include/asm/rwsem.h @@ -12,20 +12,13 @@ #endif #ifdef __KERNEL__ -struct rw_semaphore { - signed long count; + #define RWSEM_UNLOCKED_VALUE 0x00000000L #define RWSEM_ACTIVE_BIAS 0x00000001L #define RWSEM_ACTIVE_MASK 0xffffffffL #define RWSEM_WAITING_BIAS (-RWSEM_ACTIVE_MASK-1) #define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS #define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) - spinlock_t wait_lock; - struct list_head wait_list; -#ifdef CONFIG_DEBUG_LOCK_ALLOC - struct lockdep_map dep_map; -#endif -}; #ifdef CONFIG_DEBUG_LOCK_ALLOC # define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname } diff --git a/arch/x86/include/asm/rwsem.h b/arch/x86/include/asm/rwsem.h index c30206c2bbf..995cfe4c985 100644 --- a/arch/x86/include/asm/rwsem.h +++ b/arch/x86/include/asm/rwsem.h @@ -49,8 +49,6 @@ extern asmregparm struct rw_semaphore * rwsem_downgrade_wake(struct rw_semaphore *sem); /* - * the semaphore definition - * * The bias values and the counter type limits the number of * potential readers/writers to 32767 for 32 bits and 2147483647 * for 64 bits. @@ -68,22 +66,12 @@ extern asmregparm struct rw_semaphore * #define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS #define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) -struct rw_semaphore { - long count; - spinlock_t wait_lock; - struct list_head wait_list; -#ifdef CONFIG_DEBUG_LOCK_ALLOC - struct lockdep_map dep_map; -#endif -}; - #ifdef CONFIG_DEBUG_LOCK_ALLOC # define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname } #else # define __RWSEM_DEP_MAP_INIT(lockname) #endif - #define __RWSEM_INITIALIZER(name) \ { \ RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \ diff --git a/arch/xtensa/include/asm/rwsem.h b/arch/xtensa/include/asm/rwsem.h index 1be2102c648..585cab9b0bd 100644 --- a/arch/xtensa/include/asm/rwsem.h +++ b/arch/xtensa/include/asm/rwsem.h @@ -16,20 +16,13 @@ #ifndef _LINUX_RWSEM_H #error "Please don't include directly, use instead." #endif -/* - * the semaphore definition - */ -struct rw_semaphore { - signed long count; + #define RWSEM_UNLOCKED_VALUE 0x00000000 #define RWSEM_ACTIVE_BIAS 0x00000001 #define RWSEM_ACTIVE_MASK 0x0000ffff #define RWSEM_WAITING_BIAS (-0x00010000) #define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS #define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) - spinlock_t wait_lock; - struct list_head wait_list; -}; #define __RWSEM_INITIALIZER(name) \ { RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \ -- cgit v1.2.3-18-g5258 From 12249b34414dba7f386aadcf6be7ca36c6878300 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 26 Jan 2011 20:06:00 +0000 Subject: rwsem: Move duplicate init macros and functions to linux/rwsem.h The rwsem initializers and related macros and functions are mostly the same. Some of them lack the lockdep initializer, but having it in place does not matter for architectures which do not support lockdep. powerpc, sparc, x86: No functional change sh, s390: Removes the duplicate init_rwsem (inline and #define) alpha, ia64, xtensa: Use the lockdep capable init function in lib/rwsem.c which is just uninlining the init function for the LOCKDEP=n case Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra Cc: David Howells Cc: Benjamin Herrenschmidt Cc: Matt Turner Acked-by: Tony Luck Acked-by: Heiko Carstens Cc: Paul Mundt Acked-by: David Miller Cc: Chris Zankel LKML-Reference: <20110126195833.771812729@linutronix.de> --- arch/alpha/include/asm/rwsem.h | 14 -------------- arch/ia64/include/asm/rwsem.h | 15 --------------- arch/powerpc/include/asm/rwsem.h | 27 --------------------------- arch/s390/include/asm/rwsem.h | 35 ----------------------------------- arch/sh/include/asm/rwsem.h | 31 ------------------------------- arch/sparc/include/asm/rwsem.h | 23 ----------------------- arch/x86/include/asm/rwsem.h | 25 ------------------------- arch/xtensa/include/asm/rwsem.h | 14 -------------- 8 files changed, 184 deletions(-) (limited to 'arch') diff --git a/arch/alpha/include/asm/rwsem.h b/arch/alpha/include/asm/rwsem.h index 3e5619ead29..c9f5b90e926 100644 --- a/arch/alpha/include/asm/rwsem.h +++ b/arch/alpha/include/asm/rwsem.h @@ -26,20 +26,6 @@ extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem); #define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS #define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) -#define __RWSEM_INITIALIZER(name) \ - { RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \ - LIST_HEAD_INIT((name).wait_list) } - -#define DECLARE_RWSEM(name) \ - struct rw_semaphore name = __RWSEM_INITIALIZER(name) - -static inline void init_rwsem(struct rw_semaphore *sem) -{ - sem->count = RWSEM_UNLOCKED_VALUE; - spin_lock_init(&sem->wait_lock); - INIT_LIST_HEAD(&sem->wait_list); -} - static inline void __down_read(struct rw_semaphore *sem) { long oldcount; diff --git a/arch/ia64/include/asm/rwsem.h b/arch/ia64/include/asm/rwsem.h index 1fe465804dc..379854630e9 100644 --- a/arch/ia64/include/asm/rwsem.h +++ b/arch/ia64/include/asm/rwsem.h @@ -34,26 +34,11 @@ #define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS #define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) -#define __RWSEM_INITIALIZER(name) \ - { RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \ - LIST_HEAD_INIT((name).wait_list) } - -#define DECLARE_RWSEM(name) \ - struct rw_semaphore name = __RWSEM_INITIALIZER(name) - extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem); extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem); extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem); extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem); -static inline void -init_rwsem (struct rw_semaphore *sem) -{ - sem->count = RWSEM_UNLOCKED_VALUE; - spin_lock_init(&sem->wait_lock); - INIT_LIST_HEAD(&sem->wait_list); -} - /* * lock for reading */ diff --git a/arch/powerpc/include/asm/rwsem.h b/arch/powerpc/include/asm/rwsem.h index bc1acc22922..f86fdf743af 100644 --- a/arch/powerpc/include/asm/rwsem.h +++ b/arch/powerpc/include/asm/rwsem.h @@ -28,38 +28,11 @@ #define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS #define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) -#ifdef CONFIG_DEBUG_LOCK_ALLOC -# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname } -#else -# define __RWSEM_DEP_MAP_INIT(lockname) -#endif - -#define __RWSEM_INITIALIZER(name) \ -{ \ - RWSEM_UNLOCKED_VALUE, \ - __SPIN_LOCK_UNLOCKED((name).wait_lock), \ - LIST_HEAD_INIT((name).wait_list) \ - __RWSEM_DEP_MAP_INIT(name) \ -} - -#define DECLARE_RWSEM(name) \ - struct rw_semaphore name = __RWSEM_INITIALIZER(name) - extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem); extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem); extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem); extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem); -extern void __init_rwsem(struct rw_semaphore *sem, const char *name, - struct lock_class_key *key); - -#define init_rwsem(sem) \ - do { \ - static struct lock_class_key __key; \ - \ - __init_rwsem((sem), #sem, &__key); \ - } while (0) - /* * lock for reading */ diff --git a/arch/s390/include/asm/rwsem.h b/arch/s390/include/asm/rwsem.h index 6e075f1d97b..f0f527756ee 100644 --- a/arch/s390/include/asm/rwsem.h +++ b/arch/s390/include/asm/rwsem.h @@ -63,41 +63,6 @@ extern struct rw_semaphore *rwsem_downgrade_write(struct rw_semaphore *); #define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS #define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) -/* - * initialisation - */ - -#ifdef CONFIG_DEBUG_LOCK_ALLOC -# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname } -#else -# define __RWSEM_DEP_MAP_INIT(lockname) -#endif - -#define __RWSEM_INITIALIZER(name) \ - { RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait.lock), \ - LIST_HEAD_INIT((name).wait_list) __RWSEM_DEP_MAP_INIT(name) } - -#define DECLARE_RWSEM(name) \ - struct rw_semaphore name = __RWSEM_INITIALIZER(name) - -static inline void init_rwsem(struct rw_semaphore *sem) -{ - sem->count = RWSEM_UNLOCKED_VALUE; - spin_lock_init(&sem->wait_lock); - INIT_LIST_HEAD(&sem->wait_list); -} - -extern void __init_rwsem(struct rw_semaphore *sem, const char *name, - struct lock_class_key *key); - -#define init_rwsem(sem) \ -do { \ - static struct lock_class_key __key; \ - \ - __init_rwsem((sem), #sem, &__key); \ -} while (0) - - /* * lock for reading */ diff --git a/arch/sh/include/asm/rwsem.h b/arch/sh/include/asm/rwsem.h index dffc62589f7..798699d0687 100644 --- a/arch/sh/include/asm/rwsem.h +++ b/arch/sh/include/asm/rwsem.h @@ -19,42 +19,11 @@ #define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS #define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) -#ifdef CONFIG_DEBUG_LOCK_ALLOC -# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname } -#else -# define __RWSEM_DEP_MAP_INIT(lockname) -#endif - -#define __RWSEM_INITIALIZER(name) \ - { RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \ - LIST_HEAD_INIT((name).wait_list) \ - __RWSEM_DEP_MAP_INIT(name) } - -#define DECLARE_RWSEM(name) \ - struct rw_semaphore name = __RWSEM_INITIALIZER(name) - extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem); extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem); extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem); extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem); -extern void __init_rwsem(struct rw_semaphore *sem, const char *name, - struct lock_class_key *key); - -#define init_rwsem(sem) \ -do { \ - static struct lock_class_key __key; \ - \ - __init_rwsem((sem), #sem, &__key); \ -} while (0) - -static inline void init_rwsem(struct rw_semaphore *sem) -{ - sem->count = RWSEM_UNLOCKED_VALUE; - spin_lock_init(&sem->wait_lock); - INIT_LIST_HEAD(&sem->wait_list); -} - /* * lock for reading */ diff --git a/arch/sparc/include/asm/rwsem.h b/arch/sparc/include/asm/rwsem.h index 4c16d1de2ab..79f7c1ca6f9 100644 --- a/arch/sparc/include/asm/rwsem.h +++ b/arch/sparc/include/asm/rwsem.h @@ -20,34 +20,11 @@ #define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS #define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) -#ifdef CONFIG_DEBUG_LOCK_ALLOC -# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname } -#else -# define __RWSEM_DEP_MAP_INIT(lockname) -#endif - -#define __RWSEM_INITIALIZER(name) \ -{ RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \ - LIST_HEAD_INIT((name).wait_list) __RWSEM_DEP_MAP_INIT(name) } - -#define DECLARE_RWSEM(name) \ - struct rw_semaphore name = __RWSEM_INITIALIZER(name) - extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem); extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem); extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem); extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem); -extern void __init_rwsem(struct rw_semaphore *sem, const char *name, - struct lock_class_key *key); - -#define init_rwsem(sem) \ -do { \ - static struct lock_class_key __key; \ - \ - __init_rwsem((sem), #sem, &__key); \ -} while (0) - /* * lock for reading */ diff --git a/arch/x86/include/asm/rwsem.h b/arch/x86/include/asm/rwsem.h index 995cfe4c985..c0c91b4ecc8 100644 --- a/arch/x86/include/asm/rwsem.h +++ b/arch/x86/include/asm/rwsem.h @@ -66,31 +66,6 @@ extern asmregparm struct rw_semaphore * #define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS #define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) -#ifdef CONFIG_DEBUG_LOCK_ALLOC -# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname } -#else -# define __RWSEM_DEP_MAP_INIT(lockname) -#endif - -#define __RWSEM_INITIALIZER(name) \ -{ \ - RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \ - LIST_HEAD_INIT((name).wait_list) __RWSEM_DEP_MAP_INIT(name) \ -} - -#define DECLARE_RWSEM(name) \ - struct rw_semaphore name = __RWSEM_INITIALIZER(name) - -extern void __init_rwsem(struct rw_semaphore *sem, const char *name, - struct lock_class_key *key); - -#define init_rwsem(sem) \ -do { \ - static struct lock_class_key __key; \ - \ - __init_rwsem((sem), #sem, &__key); \ -} while (0) - /* * lock for reading */ diff --git a/arch/xtensa/include/asm/rwsem.h b/arch/xtensa/include/asm/rwsem.h index 585cab9b0bd..2fa42021235 100644 --- a/arch/xtensa/include/asm/rwsem.h +++ b/arch/xtensa/include/asm/rwsem.h @@ -24,25 +24,11 @@ #define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS #define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) -#define __RWSEM_INITIALIZER(name) \ - { RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \ - LIST_HEAD_INIT((name).wait_list) } - -#define DECLARE_RWSEM(name) \ - struct rw_semaphore name = __RWSEM_INITIALIZER(name) - extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem); extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem); extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem); extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem); -static inline void init_rwsem(struct rw_semaphore *sem) -{ - sem->count = RWSEM_UNLOCKED_VALUE; - spin_lock_init(&sem->wait_lock); - INIT_LIST_HEAD(&sem->wait_list); -} - /* * lock for reading */ -- cgit v1.2.3-18-g5258 From 41e5887fa39ab272d9266a09cbefdef270e28b93 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 26 Jan 2011 20:06:03 +0000 Subject: rwsem: Unify the duplicate rwsem_is_locked() inlines Instead of having the same implementation in each architecture, move it to linux/rwsem.h and remove the duplicates. It's unlikely that an arch will ever implement something different, but we can deal with that when it happens. Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra Cc: David Howells Cc: Benjamin Herrenschmidt Cc: Matt Turner Acked-by: Tony Luck Acked-by: Heiko Carstens Cc: Paul Mundt Acked-by: David Miller Cc: Chris Zankel LKML-Reference: <20110126195833.876773757@linutronix.de> Signed-off-by: Thomas Gleixner --- arch/alpha/include/asm/rwsem.h | 5 ----- arch/ia64/include/asm/rwsem.h | 5 ----- arch/powerpc/include/asm/rwsem.h | 5 ----- arch/s390/include/asm/rwsem.h | 5 ----- arch/sh/include/asm/rwsem.h | 5 ----- arch/sparc/include/asm/rwsem.h | 5 ----- arch/x86/include/asm/rwsem.h | 5 ----- arch/xtensa/include/asm/rwsem.h | 5 ----- 8 files changed, 40 deletions(-) (limited to 'arch') diff --git a/arch/alpha/include/asm/rwsem.h b/arch/alpha/include/asm/rwsem.h index c9f5b90e926..fc7f54337c3 100644 --- a/arch/alpha/include/asm/rwsem.h +++ b/arch/alpha/include/asm/rwsem.h @@ -224,10 +224,5 @@ static inline long rwsem_atomic_update(long val, struct rw_semaphore *sem) #endif } -static inline int rwsem_is_locked(struct rw_semaphore *sem) -{ - return (sem->count != 0); -} - #endif /* __KERNEL__ */ #endif /* _ALPHA_RWSEM_H */ diff --git a/arch/ia64/include/asm/rwsem.h b/arch/ia64/include/asm/rwsem.h index 379854630e9..148b61a96b8 100644 --- a/arch/ia64/include/asm/rwsem.h +++ b/arch/ia64/include/asm/rwsem.h @@ -147,9 +147,4 @@ __downgrade_write (struct rw_semaphore *sem) #define rwsem_atomic_add(delta, sem) atomic64_add(delta, (atomic64_t *)(&(sem)->count)) #define rwsem_atomic_update(delta, sem) atomic64_add_return(delta, (atomic64_t *)(&(sem)->count)) -static inline int rwsem_is_locked(struct rw_semaphore *sem) -{ - return (sem->count != 0); -} - #endif /* _ASM_IA64_RWSEM_H */ diff --git a/arch/powerpc/include/asm/rwsem.h b/arch/powerpc/include/asm/rwsem.h index f86fdf743af..38e8e5c508d 100644 --- a/arch/powerpc/include/asm/rwsem.h +++ b/arch/powerpc/include/asm/rwsem.h @@ -133,10 +133,5 @@ static inline long rwsem_atomic_update(long delta, struct rw_semaphore *sem) return atomic_long_add_return(delta, (atomic_long_t *)&sem->count); } -static inline int rwsem_is_locked(struct rw_semaphore *sem) -{ - return sem->count != 0; -} - #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_RWSEM_H */ diff --git a/arch/s390/include/asm/rwsem.h b/arch/s390/include/asm/rwsem.h index f0f527756ee..80522dcb6cc 100644 --- a/arch/s390/include/asm/rwsem.h +++ b/arch/s390/include/asm/rwsem.h @@ -325,10 +325,5 @@ static inline long rwsem_atomic_update(long delta, struct rw_semaphore *sem) return new; } -static inline int rwsem_is_locked(struct rw_semaphore *sem) -{ - return (sem->count != 0); -} - #endif /* __KERNEL__ */ #endif /* _S390_RWSEM_H */ diff --git a/arch/sh/include/asm/rwsem.h b/arch/sh/include/asm/rwsem.h index 798699d0687..2f8cf9761eb 100644 --- a/arch/sh/include/asm/rwsem.h +++ b/arch/sh/include/asm/rwsem.h @@ -133,10 +133,5 @@ static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem) return atomic_add_return(delta, (atomic_t *)(&sem->count)); } -static inline int rwsem_is_locked(struct rw_semaphore *sem) -{ - return (sem->count != 0); -} - #endif /* __KERNEL__ */ #endif /* _ASM_SH_RWSEM_H */ diff --git a/arch/sparc/include/asm/rwsem.h b/arch/sparc/include/asm/rwsem.h index 79f7c1ca6f9..4f4391fd565 100644 --- a/arch/sparc/include/asm/rwsem.h +++ b/arch/sparc/include/asm/rwsem.h @@ -124,11 +124,6 @@ static inline long rwsem_atomic_update(long delta, struct rw_semaphore *sem) return atomic64_add_return(delta, (atomic64_t *)(&sem->count)); } -static inline int rwsem_is_locked(struct rw_semaphore *sem) -{ - return (sem->count != 0); -} - #endif /* __KERNEL__ */ #endif /* _SPARC64_RWSEM_H */ diff --git a/arch/x86/include/asm/rwsem.h b/arch/x86/include/asm/rwsem.h index c0c91b4ecc8..776d76fe2f9 100644 --- a/arch/x86/include/asm/rwsem.h +++ b/arch/x86/include/asm/rwsem.h @@ -222,10 +222,5 @@ static inline long rwsem_atomic_update(long delta, struct rw_semaphore *sem) return tmp + delta; } -static inline int rwsem_is_locked(struct rw_semaphore *sem) -{ - return (sem->count != 0); -} - #endif /* __KERNEL__ */ #endif /* _ASM_X86_RWSEM_H */ diff --git a/arch/xtensa/include/asm/rwsem.h b/arch/xtensa/include/asm/rwsem.h index 2fa42021235..da61633ccba 100644 --- a/arch/xtensa/include/asm/rwsem.h +++ b/arch/xtensa/include/asm/rwsem.h @@ -133,9 +133,4 @@ static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem) return atomic_add_return(delta, (atomic_t *)(&sem->count)); } -static inline int rwsem_is_locked(struct rw_semaphore *sem) -{ - return (sem->count != 0); -} - #endif /* _XTENSA_RWSEM_H */ -- cgit v1.2.3-18-g5258 From aac72277fda6ef788bb8d5deaa502ce9b9b6e472 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 26 Jan 2011 20:06:06 +0000 Subject: rwsem: Move duplicate function prototypes to linux/rwsem.h All architecture specific rwsem headers carry the same function prototypes. Just x86 adds asmregparm, which is an empty define on all other architectures. S390 has a stale rwsem_downgrade_write() prototype. Remove the duplicates and add the prototypes to linux/rwsem.h Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra Cc: David Howells Cc: Benjamin Herrenschmidt Cc: Richard Henderson Acked-by: Tony Luck Acked-by: Heiko Carstens Cc: Paul Mundt Acked-by: David Miller Cc: Chris Zankel LKML-Reference: <20110126195833.970840140@linutronix.de> Signed-off-by: Thomas Gleixner --- arch/alpha/include/asm/rwsem.h | 5 ----- arch/ia64/include/asm/rwsem.h | 5 ----- arch/powerpc/include/asm/rwsem.h | 5 ----- arch/s390/include/asm/rwsem.h | 6 ------ arch/sh/include/asm/rwsem.h | 5 ----- arch/sparc/include/asm/rwsem.h | 5 ----- arch/x86/include/asm/rwsem.h | 9 --------- arch/xtensa/include/asm/rwsem.h | 5 ----- 8 files changed, 45 deletions(-) (limited to 'arch') diff --git a/arch/alpha/include/asm/rwsem.h b/arch/alpha/include/asm/rwsem.h index fc7f54337c3..a83bbea62c6 100644 --- a/arch/alpha/include/asm/rwsem.h +++ b/arch/alpha/include/asm/rwsem.h @@ -14,11 +14,6 @@ #include -extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem); -extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem); -extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *); -extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem); - #define RWSEM_UNLOCKED_VALUE 0x0000000000000000L #define RWSEM_ACTIVE_BIAS 0x0000000000000001L #define RWSEM_ACTIVE_MASK 0x00000000ffffffffL diff --git a/arch/ia64/include/asm/rwsem.h b/arch/ia64/include/asm/rwsem.h index 148b61a96b8..3027e7516d8 100644 --- a/arch/ia64/include/asm/rwsem.h +++ b/arch/ia64/include/asm/rwsem.h @@ -34,11 +34,6 @@ #define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS #define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) -extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem); -extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem); -extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem); -extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem); - /* * lock for reading */ diff --git a/arch/powerpc/include/asm/rwsem.h b/arch/powerpc/include/asm/rwsem.h index 38e8e5c508d..bb1e2cdeb9b 100644 --- a/arch/powerpc/include/asm/rwsem.h +++ b/arch/powerpc/include/asm/rwsem.h @@ -28,11 +28,6 @@ #define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS #define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) -extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem); -extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem); -extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem); -extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem); - /* * lock for reading */ diff --git a/arch/s390/include/asm/rwsem.h b/arch/s390/include/asm/rwsem.h index 80522dcb6cc..d0eb4653ceb 100644 --- a/arch/s390/include/asm/rwsem.h +++ b/arch/s390/include/asm/rwsem.h @@ -43,12 +43,6 @@ #ifdef __KERNEL__ -extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *); -extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *); -extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *); -extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *); -extern struct rw_semaphore *rwsem_downgrade_write(struct rw_semaphore *); - #ifndef __s390x__ #define RWSEM_UNLOCKED_VALUE 0x00000000 #define RWSEM_ACTIVE_BIAS 0x00000001 diff --git a/arch/sh/include/asm/rwsem.h b/arch/sh/include/asm/rwsem.h index 2f8cf9761eb..edab5726529 100644 --- a/arch/sh/include/asm/rwsem.h +++ b/arch/sh/include/asm/rwsem.h @@ -19,11 +19,6 @@ #define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS #define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) -extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem); -extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem); -extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem); -extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem); - /* * lock for reading */ diff --git a/arch/sparc/include/asm/rwsem.h b/arch/sparc/include/asm/rwsem.h index 4f4391fd565..069bf4d663a 100644 --- a/arch/sparc/include/asm/rwsem.h +++ b/arch/sparc/include/asm/rwsem.h @@ -20,11 +20,6 @@ #define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS #define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) -extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem); -extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem); -extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem); -extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem); - /* * lock for reading */ diff --git a/arch/x86/include/asm/rwsem.h b/arch/x86/include/asm/rwsem.h index 776d76fe2f9..df4cd32b4cc 100644 --- a/arch/x86/include/asm/rwsem.h +++ b/arch/x86/include/asm/rwsem.h @@ -39,15 +39,6 @@ #ifdef __KERNEL__ #include -extern asmregparm struct rw_semaphore * - rwsem_down_read_failed(struct rw_semaphore *sem); -extern asmregparm struct rw_semaphore * - rwsem_down_write_failed(struct rw_semaphore *sem); -extern asmregparm struct rw_semaphore * - rwsem_wake(struct rw_semaphore *); -extern asmregparm struct rw_semaphore * - rwsem_downgrade_wake(struct rw_semaphore *sem); - /* * The bias values and the counter type limits the number of * potential readers/writers to 32767 for 32 bits and 2147483647 diff --git a/arch/xtensa/include/asm/rwsem.h b/arch/xtensa/include/asm/rwsem.h index da61633ccba..249619e7e7f 100644 --- a/arch/xtensa/include/asm/rwsem.h +++ b/arch/xtensa/include/asm/rwsem.h @@ -24,11 +24,6 @@ #define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS #define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) -extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem); -extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem); -extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem); -extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem); - /* * lock for reading */ -- cgit v1.2.3-18-g5258 From 5756e9dd0de6d5c307773f8f734c0684b3098fdd Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Wed, 26 Jan 2011 18:34:26 +0100 Subject: ARM: 6640/1: Thumb-2: Symbol manipulation macros for function body copying In low-level board support code, there is sometimes a need to copy a function body to another location at run-time. A straightforward call to memcpy doesn't work in Thumb-2, because bit 0 of external Thumb function symbols is set to 1, indicating that the function is Thumb. Without corrective measures, this will cause an off-by-one copy, and the copy may be called using the wrong instruction set. This patch adds an fncpy() macro to help with such copies. Particular care is needed, because C doesn't guarantee any defined behaviour when casting a function pointer to any other type. This has been observed to lead to strange optimisation side-effects when doing the arithmetic which is required in order to copy/move function bodies correctly in Thumb-2. Thanks to Russell King and Nicolas Pitre for their input on this patch. Signed-off-by: Dave Martin Tested-by: Jean Pihet Tested-by: Tony Lindgren Tested-by: Kevin Hilman Signed-off-by: Russell King --- arch/arm/include/asm/fncpy.h | 94 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 94 insertions(+) create mode 100644 arch/arm/include/asm/fncpy.h (limited to 'arch') diff --git a/arch/arm/include/asm/fncpy.h b/arch/arm/include/asm/fncpy.h new file mode 100644 index 00000000000..de535474692 --- /dev/null +++ b/arch/arm/include/asm/fncpy.h @@ -0,0 +1,94 @@ +/* + * arch/arm/include/asm/fncpy.h - helper macros for function body copying + * + * Copyright (C) 2011 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* + * These macros are intended for use when there is a need to copy a low-level + * function body into special memory. + * + * For example, when reconfiguring the SDRAM controller, the code doing the + * reconfiguration may need to run from SRAM. + * + * NOTE: that the copied function body must be entirely self-contained and + * position-independent in order for this to work properly. + * + * NOTE: in order for embedded literals and data to get referenced correctly, + * the alignment of functions must be preserved when copying. To ensure this, + * the source and destination addresses for fncpy() must be aligned to a + * multiple of 8 bytes: you will be get a BUG() if this condition is not met. + * You will typically need a ".align 3" directive in the assembler where the + * function to be copied is defined, and ensure that your allocator for the + * destination buffer returns 8-byte-aligned pointers. + * + * Typical usage example: + * + * extern int f(args); + * extern uint32_t size_of_f; + * int (*copied_f)(args); + * void *sram_buffer; + * + * copied_f = fncpy(sram_buffer, &f, size_of_f); + * + * ... later, call the function: ... + * + * copied_f(args); + * + * The size of the function to be copied can't be determined from C: + * this must be determined by other means, such as adding assmbler directives + * in the file where f is defined. + */ + +#ifndef __ASM_FNCPY_H +#define __ASM_FNCPY_H + +#include +#include + +#include +#include + +/* + * Minimum alignment requirement for the source and destination addresses + * for function copying. + */ +#define FNCPY_ALIGN 8 + +#define fncpy(dest_buf, funcp, size) ({ \ + uintptr_t __funcp_address; \ + typeof(funcp) __result; \ + \ + asm("" : "=r" (__funcp_address) : "0" (funcp)); \ + \ + /* \ + * Ensure alignment of source and destination addresses, \ + * disregarding the function's Thumb bit: \ + */ \ + BUG_ON((uintptr_t)(dest_buf) & (FNCPY_ALIGN - 1) || \ + (__funcp_address & ~(uintptr_t)1 & (FNCPY_ALIGN - 1))); \ + \ + memcpy(dest_buf, (void const *)(__funcp_address & ~1), size); \ + flush_icache_range((unsigned long)(dest_buf), \ + (unsigned long)(dest_buf) + (size)); \ + \ + asm("" : "=r" (__result) \ + : "0" ((uintptr_t)(dest_buf) | (__funcp_address & 1))); \ + \ + __result; \ +}) + +#endif /* !__ASM_FNCPY_H */ -- cgit v1.2.3-18-g5258 From 0fbfd987ffd5e0b0d137a5684d4865bb1efac6a3 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 14 Jan 2011 11:18:02 +0100 Subject: ARM i.MX35 pcm043: remove unnecessary CONFIG_I2C ifdefs Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/mach-pcm043.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c index bcf83fc7e70..a27022d15c2 100644 --- a/arch/arm/mach-mx3/mach-pcm043.c +++ b/arch/arm/mach-mx3/mach-pcm043.c @@ -115,7 +115,6 @@ static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; -#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE static const struct imxi2c_platform_data pcm043_i2c0_data __initconst = { .bitrate = 50000, }; @@ -134,7 +133,6 @@ static struct i2c_board_info pcm043_i2c_devices[] = { I2C_BOARD_INFO("pcf8563", 0x51), } }; -#endif static struct platform_device *devices[] __initdata = { &pcm043_flash, @@ -369,12 +367,10 @@ static void __init mxc_board_init(void) imx35_add_imx_uart1(&uart_pdata); -#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE i2c_register_board_info(0, pcm043_i2c_devices, ARRAY_SIZE(pcm043_i2c_devices)); imx35_add_imx_i2c0(&pcm043_i2c0_data); -#endif mxc_register_device(&mx3_ipu, &mx3_ipu_data); mxc_register_device(&mx3_fb, &mx3fb_pdata); -- cgit v1.2.3-18-g5258 From 070ed7335961825f6c1a137b929c67627c31c907 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 14 Jan 2011 11:19:35 +0100 Subject: ARM i.MX35 pcm043: put usbh1 outside CONFIG_USB_ULPI The usbh1 port of the pcm043 does not use ulpi, so put it outside the corresponding ifdefs. Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/mach-pcm043.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c index a27022d15c2..a515290f15f 100644 --- a/arch/arm/mach-mx3/mach-pcm043.c +++ b/arch/arm/mach-mx3/mach-pcm043.c @@ -310,13 +310,13 @@ static struct mxc_usbh_platform_data otg_pdata __initdata = { .portsc = MXC_EHCI_MODE_UTMI, .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; +#endif static const struct mxc_usbh_platform_data usbh1_pdata __initconst = { .portsc = MXC_EHCI_MODE_SERIAL, .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN, }; -#endif static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .operating_mode = FSL_USB2_DR_DEVICE, @@ -382,9 +382,9 @@ static void __init mxc_board_init(void) imx35_add_mxc_ehci_otg(&otg_pdata); } - - imx35_add_mxc_ehci_hs(&usbh1_pdata); #endif + imx35_add_mxc_ehci_hs(&usbh1_pdata); + if (!otg_mode_host) imx35_add_fsl_usb2_udc(&otg_device_pdata); -- cgit v1.2.3-18-g5258 From afc11e6ef7547243f1429cce8de616049439a172 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 14 Jan 2011 11:21:26 +0100 Subject: ARM i.MX31 mx31ads: remove unnecessary CONFIG_I2C ifdefs Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/mach-mx31ads.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mx3/mach-mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c index 88b97d62b57..f9a71096be4 100644 --- a/arch/arm/mach-mx3/mach-mx31ads.c +++ b/arch/arm/mach-mx3/mach-mx31ads.c @@ -476,7 +476,6 @@ static struct wm8350_platform_data __initdata mx31_wm8350_pdata = { }; #endif -#if defined(CONFIG_I2C_IMX) || defined(CONFIG_I2C_IMX_MODULE) static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = { #ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 { @@ -497,11 +496,6 @@ static void mxc_init_i2c(void) imx31_add_imx_i2c1(NULL); } -#else -static void mxc_init_i2c(void) -{ -} -#endif static unsigned int ssi_pins[] = { MX31_PIN_SFS5__SFS5, -- cgit v1.2.3-18-g5258 From 889faeaad0333f692f8acd870faeaa01bf1fc21d Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 14 Jan 2011 11:21:59 +0100 Subject: ARM i.MX31 mx31ads: remove unnecessary CONFIG_SERIAL_IMX ifdefs Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/mach-mx31ads.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mx3/mach-mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c index f9a71096be4..1a83dc53e11 100644 --- a/arch/arm/mach-mx3/mach-mx31ads.c +++ b/arch/arm/mach-mx3/mach-mx31ads.c @@ -117,7 +117,6 @@ static inline int mxc_init_extuart(void) } #endif -#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE) static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -134,11 +133,6 @@ static inline void mxc_init_imx_uart(void) mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0"); imx31_add_imx_uart0(&uart_pdata); } -#else /* !SERIAL_IMX */ -static inline void mxc_init_imx_uart(void) -{ -} -#endif /* !SERIAL_IMX */ static void mx31ads_expio_irq_handler(u32 irq, struct irq_desc *desc) { -- cgit v1.2.3-18-g5258 From 9f43e44be8787ddc01652dfc4331b34ae1475426 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 14 Jan 2011 11:22:31 +0100 Subject: ARM i.MX31 mx31ads: remove unnecessary CONFIG_SERIAL_8250 ifdefs Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/mach-mx31ads.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mx3/mach-mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c index 1a83dc53e11..e40eb6e2694 100644 --- a/arch/arm/mach-mx3/mach-mx31ads.c +++ b/arch/arm/mach-mx3/mach-mx31ads.c @@ -73,8 +73,7 @@ * This file contains the board-specific initialization routines. */ -#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) -/*! +/* * The serial port definition structure. */ static struct plat_serial8250_port serial_platform_data[] = { @@ -110,12 +109,6 @@ static int __init mxc_init_extuart(void) { return platform_device_register(&serial_device); } -#else -static inline int mxc_init_extuart(void) -{ - return 0; -} -#endif static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, -- cgit v1.2.3-18-g5258 From 5ec561afbc44dc8dfe789deafa5bf47da463938a Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 14 Jan 2011 11:23:44 +0100 Subject: ARM i.MX27 pca100: remove unnecessary CONFIG_SPI_IMX ifdefs Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/mach-pca100.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index cccc0a0a9c7..faa4e04006e 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -187,7 +187,6 @@ static struct i2c_board_info pca100_i2c_devices[] = { } }; -#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) static struct spi_eeprom at25320 = { .name = "at25320an", .byte_len = 4096, @@ -211,7 +210,6 @@ static const struct spi_imx_master pca100_spi0_data __initconst = { .chipselect = pca100_spi_cs, .num_chipselect = ARRAY_SIZE(pca100_spi_cs), }; -#endif static void pca100_ac97_warm_reset(struct snd_ac97 *ac97) { @@ -389,13 +387,11 @@ static void __init pca100_init(void) imx27_add_imx_i2c(1, &pca100_i2c1_data); -#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_IN); mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN); spi_register_board_info(pca100_spi_board_info, ARRAY_SIZE(pca100_spi_board_info)); imx27_add_spi_imx0(&pca100_spi0_data); -#endif gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs"); gpio_direction_output(OTG_PHY_CS_GPIO, 1); -- cgit v1.2.3-18-g5258 From 285faa1b5631968aa27e9816f082448bcd2ba044 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 14 Jan 2011 11:25:40 +0100 Subject: ARM i.MX27 eukrea mbimx27: remove unnecessary CONFIG_SPI_IMX ifdefs Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/eukrea_mbimx27-baseboard.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c index 275c8589d79..b6d68cfefde 100644 --- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c @@ -357,13 +357,11 @@ void __init eukrea_mbimx27_baseboard_init(void) ads7846_dev_init(); #endif -#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) /* SPI_CS0 init */ mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT); imx27_add_spi_imx0(&eukrea_mbimx27_spi0_data); spi_register_board_info(eukrea_mbimx27_spi_board_info, ARRAY_SIZE(eukrea_mbimx27_spi_board_info)); -#endif /* Leds configuration */ mxc_gpio_mode(GPIO_PORTF | 16 | GPIO_GPIO | GPIO_OUT); -- cgit v1.2.3-18-g5258 From b49a2a69e561b7bf22f4c081d7c44aa992e51509 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 14 Jan 2011 11:26:25 +0100 Subject: ARM i.MX31 pcm037 eet: remove unnecessary CONFIG_SPI_IMX ifdefs Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/mach-pcm037_eet.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mx3/mach-pcm037_eet.c b/arch/arm/mach-mx3/mach-pcm037_eet.c index fda56545d2f..df6fb07d037 100644 --- a/arch/arm/mach-mx3/mach-pcm037_eet.c +++ b/arch/arm/mach-mx3/mach-pcm037_eet.c @@ -180,9 +180,7 @@ static int __init eet_init_devices(void) /* SPI */ spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev)); -#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) imx31_add_spi_imx0(&pcm037_spi1_pdata); -#endif platform_device_register(&pcm037_gpio_keys_device); -- cgit v1.2.3-18-g5258 From 0c1c8511a39ac980921e1c06b3f5809c7a42b522 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 14 Jan 2011 11:30:18 +0100 Subject: ARM i.MX51 mx51 3ds: remove unnecessary CONFIG_SERIAL_IMX ifdefs Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/board-mx51_3ds.c | 18 ++++-------------- 1 file changed, 4 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c index 8a0619b5af9..2f5acd0b677 100644 --- a/arch/arm/mach-mx5/board-mx51_3ds.c +++ b/arch/arm/mach-mx5/board-mx51_3ds.c @@ -71,23 +71,10 @@ static iomux_v3_cfg_t mx51_3ds_pads[] = { }; /* Serial ports */ -#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE) static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; -static inline void mxc_init_imx_uart(void) -{ - imx51_add_imx_uart(0, &uart_pdata); - imx51_add_imx_uart(1, &uart_pdata); - imx51_add_imx_uart(2, &uart_pdata); -} -#else /* !SERIAL_IMX */ -static inline void mxc_init_imx_uart(void) -{ -} -#endif /* SERIAL_IMX */ - #if defined(CONFIG_KEYBOARD_IMX) || defined(CONFIG_KEYBOARD_IMX_MODULE) static int mx51_3ds_board_keymap[] = { KEY(0, 0, KEY_1), @@ -161,7 +148,10 @@ static void __init mxc_board_init(void) { mxc_iomux_v3_setup_multiple_pads(mx51_3ds_pads, ARRAY_SIZE(mx51_3ds_pads)); - mxc_init_imx_uart(); + + imx51_add_imx_uart(0, &uart_pdata); + imx51_add_imx_uart(1, &uart_pdata); + imx51_add_imx_uart(2, &uart_pdata); imx51_add_ecspi(1, &mx51_3ds_ecspi2_pdata); spi_register_board_info(mx51_3ds_spi_nor_device, -- cgit v1.2.3-18-g5258 From 27d2d62b8b03c9dd2de9a367c19812e089da71c5 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 14 Jan 2011 11:30:33 +0100 Subject: ARM i.MX51 mx51 babbage: remove unnecessary CONFIG_SERIAL_IMX ifdefs Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/board-mx51_babbage.c | 19 +++++-------------- 1 file changed, 5 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index 1d231e84107..d9d402eb947 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -161,23 +161,10 @@ static iomux_v3_cfg_t mx51babbage_pads[] = { }; /* Serial ports */ -#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE) static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; -static inline void mxc_init_imx_uart(void) -{ - imx51_add_imx_uart(0, &uart_pdata); - imx51_add_imx_uart(1, &uart_pdata); - imx51_add_imx_uart(2, &uart_pdata); -} -#else /* !SERIAL_IMX */ -static inline void mxc_init_imx_uart(void) -{ -} -#endif /* SERIAL_IMX */ - static const struct imxi2c_platform_data babbage_i2c_data __initconst = { .bitrate = 100000, }; @@ -360,7 +347,11 @@ static void __init mxc_board_init(void) #endif mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads, ARRAY_SIZE(mx51babbage_pads)); - mxc_init_imx_uart(); + + imx51_add_imx_uart(0, &uart_pdata); + imx51_add_imx_uart(1, &uart_pdata); + imx51_add_imx_uart(2, &uart_pdata); + babbage_fec_reset(); imx51_add_fec(NULL); -- cgit v1.2.3-18-g5258 From 818956e0b68f35ef56e9361d0fdea5d935e3827a Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 14 Jan 2011 11:31:35 +0100 Subject: ARM i.MX51 mx51-3ds: remove unnecessary CONFIG_KEYBOARD_IMX ifdefs Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/board-mx51_3ds.c | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c index 2f5acd0b677..55d5746753a 100644 --- a/arch/arm/mach-mx5/board-mx51_3ds.c +++ b/arch/arm/mach-mx5/board-mx51_3ds.c @@ -75,7 +75,6 @@ static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; -#if defined(CONFIG_KEYBOARD_IMX) || defined(CONFIG_KEYBOARD_IMX_MODULE) static int mx51_3ds_board_keymap[] = { KEY(0, 0, KEY_1), KEY(0, 1, KEY_2), @@ -111,16 +110,6 @@ static const struct matrix_keymap_data mx51_3ds_map_data __initconst = { .keymap_size = ARRAY_SIZE(mx51_3ds_board_keymap), }; -static void mxc_init_keypad(void) -{ - imx51_add_imx_keypad(&mx51_3ds_map_data); -} -#else -static inline void mxc_init_keypad(void) -{ -} -#endif - static int mx51_3ds_spi2_cs[] = { MXC_SPI_CS(0), MX51_3DS_ECSPI2_CS, @@ -162,7 +151,7 @@ static void __init mxc_board_init(void) "devices on the board are unusable.\n"); imx51_add_sdhci_esdhc_imx(0, NULL); - mxc_init_keypad(); + imx51_add_imx_keypad(&mx51_3ds_map_data); imx51_add_imx2_wdt(0, NULL); } -- cgit v1.2.3-18-g5258 From 7f16f817e20b187e3130ce16f510971cf8ff5d07 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 14 Jan 2011 11:34:11 +0100 Subject: ARM i.MX51 cpuimx51: remove unnecessary CONFIG_SERIAL_8250 ifdefs Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/board-cpuimx51.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c index f8652ef25f8..f576a97ba12 100644 --- a/arch/arm/mach-mx5/board-cpuimx51.c +++ b/arch/arm/mach-mx5/board-cpuimx51.c @@ -60,7 +60,6 @@ #define MX51_USB_PLL_DIV_19_2_MHZ 0x01 #define MX51_USB_PLL_DIV_24_MHZ 0x02 -#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) static struct plat_serial8250_port serial_platform_data[] = { { .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x400000), @@ -105,12 +104,9 @@ static struct platform_device serial_device = { .platform_data = serial_platform_data, }, }; -#endif static struct platform_device *devices[] __initdata = { -#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) &serial_device, -#endif }; static iomux_v3_cfg_t eukrea_cpuimx51_pads[] = { -- cgit v1.2.3-18-g5258 From 53cdd3068b7b8e3a1a0e540ec42d9037296243b7 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 14 Jan 2011 11:34:33 +0100 Subject: ARM i.MX51 efikamx: remove unnecessary CONFIG_SERIAL_IMX ifdefs Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/board-mx51_efikamx.c | 17 +++-------------- 1 file changed, 3 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c index b7946f8e8d4..e23704044eb 100644 --- a/arch/arm/mach-mx5/board-mx51_efikamx.c +++ b/arch/arm/mach-mx5/board-mx51_efikamx.c @@ -121,23 +121,10 @@ static iomux_v3_cfg_t mx51efikamx_pads[] = { }; /* Serial ports */ -#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE) static const struct imxuart_platform_data uart_pdata = { .flags = IMXUART_HAVE_RTSCTS, }; -static inline void mxc_init_imx_uart(void) -{ - imx51_add_imx_uart(0, &uart_pdata); - imx51_add_imx_uart(1, &uart_pdata); - imx51_add_imx_uart(2, &uart_pdata); -} -#else /* !SERIAL_IMX */ -static inline void mxc_init_imx_uart(void) -{ -} -#endif /* SERIAL_IMX */ - /* This function is board specific as the bit mask for the plldiv will also * be different for other Freescale SoCs, thus a common bitmask is not * possible and cannot get place in /plat-mxc/ehci.c. @@ -320,7 +307,9 @@ static void __init mxc_board_init(void) ARRAY_SIZE(mx51efikamx_pads)); mx51_efikamx_board_id(); mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config); - mxc_init_imx_uart(); + imx51_add_imx_uart(0, &uart_pdata); + imx51_add_imx_uart(1, &uart_pdata); + imx51_add_imx_uart(2, &uart_pdata); imx51_add_sdhci_esdhc_imx(0, NULL); /* on < 1.2 boards both SD controllers are used */ -- cgit v1.2.3-18-g5258 From 5d046af0eb94bdf67f048ba4056e85fa080b4b07 Mon Sep 17 00:00:00 2001 From: Hartley Sweeten Date: Thu, 27 Jan 2011 17:29:29 +0100 Subject: ARM: 6641/1: ep93xx: implement gpiolib set_debounce for built-in GPIOs GPIO Ports A, B, and F on the ep93xx provide interrupt capability. It is possible to debounce the input signal on these ports when interrupts are enabled. Support for this debounce capability was provided with an ep93xx internal function. Now that gpiolib knows about gpio debounce, use the gpiolib method and do not export the internal function. Signed-off-by: H Hartley Sweeten Acked-by: Ryan Mallon Signed-off-by: Russell King --- arch/arm/mach-ep93xx/gpio.c | 33 ++++++++++++++++++++++++++++---- arch/arm/mach-ep93xx/include/mach/gpio.h | 2 -- 2 files changed, 29 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c index bec34b83495..a889fa7c3ba 100644 --- a/arch/arm/mach-ep93xx/gpio.c +++ b/arch/arm/mach-ep93xx/gpio.c @@ -61,7 +61,7 @@ static inline void ep93xx_gpio_int_mask(unsigned line) gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7)); } -void ep93xx_gpio_int_debounce(unsigned int irq, int enable) +static void ep93xx_gpio_int_debounce(unsigned int irq, bool enable) { int line = irq_to_gpio(irq); int port = line >> 3; @@ -75,7 +75,6 @@ void ep93xx_gpio_int_debounce(unsigned int irq, int enable) __raw_writeb(gpio_int_debounce[port], EP93XX_GPIO_REG(int_debounce_register_offset[port])); } -EXPORT_SYMBOL(ep93xx_gpio_int_debounce); static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc) { @@ -335,6 +334,20 @@ static void ep93xx_gpio_set(struct gpio_chip *chip, unsigned offset, int val) local_irq_restore(flags); } +static int ep93xx_gpio_set_debounce(struct gpio_chip *chip, + unsigned offset, unsigned debounce) +{ + int gpio = chip->base + offset; + int irq = gpio_to_irq(gpio); + + if (irq < 0) + return -EINVAL; + + ep93xx_gpio_int_debounce(irq, debounce ? true : false); + + return 0; +} + static void ep93xx_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) { struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); @@ -434,6 +447,18 @@ void __init ep93xx_gpio_init(void) EP93XX_SYSCON_DEVCFG_GONIDE | EP93XX_SYSCON_DEVCFG_HONIDE); - for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++) - gpiochip_add(&ep93xx_gpio_banks[i].chip); + for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++) { + struct gpio_chip *chip = &ep93xx_gpio_banks[i].chip; + + /* + * Ports A, B, and F support input debouncing when + * used as interrupts. + */ + if (!strcmp(chip->label, "A") || + !strcmp(chip->label, "B") || + !strcmp(chip->label, "F")) + chip->set_debounce = ep93xx_gpio_set_debounce; + + gpiochip_add(chip); + } } diff --git a/arch/arm/mach-ep93xx/include/mach/gpio.h b/arch/arm/mach-ep93xx/include/mach/gpio.h index c991b149bdf..c57152c231f 100644 --- a/arch/arm/mach-ep93xx/include/mach/gpio.h +++ b/arch/arm/mach-ep93xx/include/mach/gpio.h @@ -99,8 +99,6 @@ /* maximum value for irq capable line identifiers */ #define EP93XX_GPIO_LINE_MAX_IRQ EP93XX_GPIO_LINE_F(7) -extern void ep93xx_gpio_int_debounce(unsigned int irq, int enable); - /* new generic GPIO API - see Documentation/gpio.txt */ #include -- cgit v1.2.3-18-g5258 From d038b12c6d773a4b9f69ca5243773bf6314f7ee9 Mon Sep 17 00:00:00 2001 From: Stephane Eranian Date: Tue, 25 Jan 2011 17:32:01 +0200 Subject: perf: Fix Pentium4 raw event validation This patch fixes some issues with raw event validation on Pentium 4 (Netburst) based processors. As I was testing libpfm4 Netburst support, I ran into two problems in the p4_validate_raw_event() function: - the shared field must be checked ONLY when HT is on - the binding to ESCR register was missing The second item was causing raw events to not be encoded correctly compared to generic PMU events. With this patch, I can now pass Netburst events to libpfm4 examples and get meaningful results: $ task -e global_power_events:running:u noploop 1 noploop for 1 seconds 3,206,304,898 global_power_events:running Signed-off-by: Stephane Eranian Acked-by: Cyrill Gorcunov Cc: peterz@infradead.org Cc: paulus@samba.org Cc: davem@davemloft.net Cc: fweisbec@gmail.com Cc: perfmon2-devel@lists.sf.net Cc: eranian@gmail.com Cc: robert.richter@amd.com Cc: acme@redhat.com Cc: gorcunov@gmail.com Cc: ming.m.lin@intel.com LKML-Reference: <4d3efb2f.1252d80a.1a80.ffffc83f@mx.google.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perf_event_p4.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/perf_event_p4.c b/arch/x86/kernel/cpu/perf_event_p4.c index e56b9bfbabd..f7a0993c1e7 100644 --- a/arch/x86/kernel/cpu/perf_event_p4.c +++ b/arch/x86/kernel/cpu/perf_event_p4.c @@ -682,7 +682,7 @@ static int p4_validate_raw_event(struct perf_event *event) * if an event is shared accross the logical threads * the user needs special permissions to be able to use it */ - if (p4_event_bind_map[v].shared) { + if (p4_ht_active() && p4_event_bind_map[v].shared) { if (perf_paranoid_cpu() && !capable(CAP_SYS_ADMIN)) return -EACCES; } @@ -727,7 +727,8 @@ static int p4_hw_config(struct perf_event *event) event->hw.config = p4_set_ht_bit(event->hw.config); if (event->attr.type == PERF_TYPE_RAW) { - + struct p4_event_bind *bind; + unsigned int esel; /* * Clear bits we reserve to be managed by kernel itself * and never allowed from a user space @@ -743,6 +744,13 @@ static int p4_hw_config(struct perf_event *event) * bits since we keep additional info here (for cache events and etc) */ event->hw.config |= event->attr.config; + bind = p4_config_get_bind(event->attr.config); + if (!bind) { + rc = -EINVAL; + goto out; + } + esel = P4_OPCODE_ESEL(bind->opcode); + event->hw.config |= p4_config_pack_cccr(P4_CCCR_ESEL(esel)); } rc = x86_setup_perfctr(event); -- cgit v1.2.3-18-g5258 From dda99116969142cc41e945a1047a419b937536af Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 21 Jan 2011 15:30:01 -0800 Subject: x86, perf: Change two init functions to static init_hw_perf_events() is called via early_initcall now. x86_pmu_event_init is x86_pmu member function. So we can change them to static. Signed-off-by: Yinghai Lu Cc: Peter Zijlstra Cc: Paul Mackerras Cc: Arnaldo Carvalho de Melo LKML-Reference: <4D3A16F9.109@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perf_event.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index 9d977a2ea69..4d98789b066 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -1389,7 +1389,7 @@ static void __init pmu_check_apic(void) pr_info("no hardware sampling interrupt available.\n"); } -int __init init_hw_perf_events(void) +static int __init init_hw_perf_events(void) { struct event_constraint *c; int err; @@ -1608,7 +1608,7 @@ out: return ret; } -int x86_pmu_event_init(struct perf_event *event) +static int x86_pmu_event_init(struct perf_event *event) { struct pmu *tmp; int err; -- cgit v1.2.3-18-g5258 From 59b479e0985f0b795d68331d6443a7f89c47768d Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 27 Jan 2011 16:39:40 -0800 Subject: omap: Start using CONFIG_SOC_OMAP We want to have just CONFIG_ARCH_OMAP2, 3 and 4. The rest are nowadays just subcategories of these. Search and replace the following: ARCH_OMAP2420 SOC_OMAP2420 ARCH_OMAP2430 SOC_OMAP2430 ARCH_OMAP3430 SOC_OMAP3430 No functional changes. Signed-off-by: Tony Lindgren Signed-off-by: Thomas Weber Acked-by: Sourav Poddar --- arch/arm/mach-omap2/Kconfig | 16 ++++++++-------- arch/arm/mach-omap2/Makefile | 20 ++++++++++---------- arch/arm/mach-omap2/clock2xxx.h | 4 ++-- arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c | 16 ++++++++-------- arch/arm/mach-omap2/common.c | 4 ++-- arch/arm/mach-omap2/devices.c | 6 +++--- arch/arm/mach-omap2/io.c | 8 ++++---- arch/arm/mach-omap2/mailbox.c | 2 +- arch/arm/mach-omap2/mcbsp.c | 4 ++-- arch/arm/mach-omap2/opp2xxx.h | 2 +- arch/arm/mach-omap2/powerdomains2xxx_data.c | 6 +++--- arch/arm/plat-omap/counter_32k.c | 4 ++-- arch/arm/plat-omap/include/plat/cpu.h | 10 +++++----- arch/arm/plat-omap/include/plat/io.h | 4 ++-- arch/arm/plat-omap/include/plat/multi.h | 4 ++-- arch/arm/plat-omap/sram.c | 4 ++-- 16 files changed, 57 insertions(+), 57 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 1a2cf6226a5..ae7f47d1c97 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -53,20 +53,20 @@ config ARCH_OMAP4 comment "OMAP Core Type" depends on ARCH_OMAP2 -config ARCH_OMAP2420 +config SOC_OMAP2420 bool "OMAP2420 support" depends on ARCH_OMAP2 default y select OMAP_DM_TIMER select ARCH_OMAP_OTG -config ARCH_OMAP2430 +config SOC_OMAP2430 bool "OMAP2430 support" depends on ARCH_OMAP2 default y select ARCH_OMAP_OTG -config ARCH_OMAP3430 +config SOC_OMAP3430 bool "OMAP3430 support" depends on ARCH_OMAP3 default y @@ -106,25 +106,25 @@ config MACH_OMAP_GENERIC config MACH_OMAP2_TUSB6010 bool - depends on ARCH_OMAP2 && ARCH_OMAP2420 + depends on ARCH_OMAP2 && SOC_OMAP2420 default y if MACH_NOKIA_N8X0 config MACH_OMAP_H4 bool "OMAP 2420 H4 board" - depends on ARCH_OMAP2420 + depends on SOC_OMAP2420 default y select OMAP_PACKAGE_ZAF select OMAP_DEBUG_DEVICES config MACH_OMAP_APOLLON bool "OMAP 2420 Apollon board" - depends on ARCH_OMAP2420 + depends on SOC_OMAP2420 default y select OMAP_PACKAGE_ZAC config MACH_OMAP_2430SDP bool "OMAP 2430 SDP board" - depends on ARCH_OMAP2430 + depends on SOC_OMAP2430 default y select OMAP_PACKAGE_ZAC @@ -219,7 +219,7 @@ config MACH_NOKIA_N810_WIMAX config MACH_NOKIA_N8X0 bool "Nokia N800/N810" - depends on ARCH_OMAP2420 + depends on SOC_OMAP2420 default y select OMAP_PACKAGE_ZAC select MACH_NOKIA_N800 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 1c0c2b02d87..9eeabaf5e11 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -31,8 +31,8 @@ AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec) AFLAGS_omap44xx-smc.o :=-Wa,-march=armv7-a$(plus_sec) # Functions loaded to SRAM -obj-$(CONFIG_ARCH_OMAP2420) += sram242x.o -obj-$(CONFIG_ARCH_OMAP2430) += sram243x.o +obj-$(CONFIG_SOC_OMAP2420) += sram242x.o +obj-$(CONFIG_SOC_OMAP2430) += sram243x.o obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o AFLAGS_sram242x.o :=-Wa,-march=armv6 @@ -40,8 +40,8 @@ AFLAGS_sram243x.o :=-Wa,-march=armv6 AFLAGS_sram34xx.o :=-Wa,-march=armv7-a # Pin multiplexing -obj-$(CONFIG_ARCH_OMAP2420) += mux2420.o -obj-$(CONFIG_ARCH_OMAP2430) += mux2430.o +obj-$(CONFIG_SOC_OMAP2420) += mux2420.o +obj-$(CONFIG_SOC_OMAP2430) += mux2430.o obj-$(CONFIG_ARCH_OMAP3) += mux34xx.o obj-$(CONFIG_ARCH_OMAP4) += mux44xx.o @@ -113,8 +113,8 @@ obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o \ clkt2xxx_dpllcore.o \ clkt2xxx_virt_prcm_set.o \ clkt2xxx_apll.o clkt2xxx_osc.o -obj-$(CONFIG_ARCH_OMAP2420) += clock2420_data.o -obj-$(CONFIG_ARCH_OMAP2430) += clock2430.o clock2430_data.o +obj-$(CONFIG_SOC_OMAP2420) += clock2420_data.o +obj-$(CONFIG_SOC_OMAP2430) += clock2430.o clock2430_data.o obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o \ clock34xx.o clkt34xx_dpll3m2.o \ clock3517.o clock36xx.o \ @@ -123,12 +123,12 @@ obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o \ dpll3xxx.o # OMAP2 clock rate set data (old "OPP" data) -obj-$(CONFIG_ARCH_OMAP2420) += opp2420_data.o -obj-$(CONFIG_ARCH_OMAP2430) += opp2430_data.o +obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o +obj-$(CONFIG_SOC_OMAP2430) += opp2430_data.o # hwmod data -obj-$(CONFIG_ARCH_OMAP2420) += omap_hwmod_2420_data.o -obj-$(CONFIG_ARCH_OMAP2430) += omap_hwmod_2430_data.o +obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2420_data.o +obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2430_data.o obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_3xxx_data.o obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o diff --git a/arch/arm/mach-omap2/clock2xxx.h b/arch/arm/mach-omap2/clock2xxx.h index 6a658b890c1..cc5c8d422c5 100644 --- a/arch/arm/mach-omap2/clock2xxx.h +++ b/arch/arm/mach-omap2/clock2xxx.h @@ -20,13 +20,13 @@ u32 omap2xxx_get_apll_clkin(void); u32 omap2xxx_get_sysclkdiv(void); void omap2xxx_clk_prepare_for_reboot(void); -#ifdef CONFIG_ARCH_OMAP2420 +#ifdef CONFIG_SOC_OMAP2420 int omap2420_clk_init(void); #else #define omap2420_clk_init() 0 #endif -#ifdef CONFIG_ARCH_OMAP2430 +#ifdef CONFIG_SOC_OMAP2430 int omap2430_clk_init(void); #else #define omap2430_clk_init() 0 diff --git a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c index e4a7133ea3b..e6f0d18d5e8 100644 --- a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c +++ b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c @@ -171,7 +171,7 @@ static struct clkdm_dep core_24xx_wkdeps[] = { /* 2430-specific possible wakeup dependencies */ -#ifdef CONFIG_ARCH_OMAP2430 +#ifdef CONFIG_SOC_OMAP2430 /* 2430 PM_WKDEP_MDM: CORE, MPU, WKUP */ static struct clkdm_dep mdm_2430_wkdeps[] = { @@ -194,7 +194,7 @@ static struct clkdm_dep mdm_2430_wkdeps[] = { { NULL }, }; -#endif /* CONFIG_ARCH_OMAP2430 */ +#endif /* CONFIG_SOC_OMAP2430 */ /* OMAP3-specific possible dependencies */ @@ -450,7 +450,7 @@ static struct clockdomain cm_clkdm = { * 2420-only clockdomains */ -#if defined(CONFIG_ARCH_OMAP2420) +#if defined(CONFIG_SOC_OMAP2420) static struct clockdomain mpu_2420_clkdm = { .name = "mpu_clkdm", @@ -514,14 +514,14 @@ static struct clockdomain dss_2420_clkdm = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), }; -#endif /* CONFIG_ARCH_OMAP2420 */ +#endif /* CONFIG_SOC_OMAP2420 */ /* * 2430-only clockdomains */ -#if defined(CONFIG_ARCH_OMAP2430) +#if defined(CONFIG_SOC_OMAP2430) static struct clockdomain mpu_2430_clkdm = { .name = "mpu_clkdm", @@ -600,7 +600,7 @@ static struct clockdomain dss_2430_clkdm = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; -#endif /* CONFIG_ARCH_OMAP2430 */ +#endif /* CONFIG_SOC_OMAP2430 */ /* @@ -811,7 +811,7 @@ static struct clockdomain *clockdomains_omap2[] __initdata = { &cm_clkdm, &prm_clkdm, -#ifdef CONFIG_ARCH_OMAP2420 +#ifdef CONFIG_SOC_OMAP2420 &mpu_2420_clkdm, &iva1_2420_clkdm, &dsp_2420_clkdm, @@ -821,7 +821,7 @@ static struct clockdomain *clockdomains_omap2[] __initdata = { &dss_2420_clkdm, #endif -#ifdef CONFIG_ARCH_OMAP2430 +#ifdef CONFIG_SOC_OMAP2430 &mpu_2430_clkdm, &mdm_clkdm, &dsp_2430_clkdm, diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c index 778929f7e92..d5eaee3dff7 100644 --- a/arch/arm/mach-omap2/common.c +++ b/arch/arm/mach-omap2/common.c @@ -40,7 +40,7 @@ static void __init __omap2_set_globals(struct omap_globals *omap2_globals) #endif -#if defined(CONFIG_ARCH_OMAP2420) +#if defined(CONFIG_SOC_OMAP2420) static struct omap_globals omap242x_globals = { .class = OMAP242X_CLASS, @@ -61,7 +61,7 @@ void __init omap2_set_globals_242x(void) } #endif -#if defined(CONFIG_ARCH_OMAP2430) +#if defined(CONFIG_SOC_OMAP2430) static struct omap_globals omap243x_globals = { .class = OMAP243X_CLASS, diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 2c9c912f2c4..e0f0ef952bc 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -333,7 +333,7 @@ static struct platform_device omap2_mcspi2 = { }, }; -#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \ +#if defined(CONFIG_SOC_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \ defined(CONFIG_ARCH_OMAP4) static struct omap2_mcspi_platform_config omap2_mcspi3_config = { .num_cs = 2, @@ -400,7 +400,7 @@ static inline void omap4_mcspi_fixup(void) } #endif -#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \ +#if defined(CONFIG_SOC_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \ defined(CONFIG_ARCH_OMAP4) static inline void omap2_mcspi3_init(void) { @@ -895,7 +895,7 @@ void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data, /*-------------------------------------------------------------------------*/ #if defined(CONFIG_HDQ_MASTER_OMAP) || defined(CONFIG_HDQ_MASTER_OMAP_MODULE) -#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430) +#if defined(CONFIG_SOC_OMAP2430) || defined(CONFIG_SOC_OMAP3430) #define OMAP_HDQ_BASE 0x480B2000 #endif static struct resource omap_hdq_resources[] = { diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index c2032041d26..11decd85f18 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -66,7 +66,7 @@ static struct map_desc omap24xx_io_desc[] __initdata = { }, }; -#ifdef CONFIG_ARCH_OMAP2420 +#ifdef CONFIG_SOC_OMAP2420 static struct map_desc omap242x_io_desc[] __initdata = { { .virtual = DSP_MEM_2420_VIRT, @@ -90,7 +90,7 @@ static struct map_desc omap242x_io_desc[] __initdata = { #endif -#ifdef CONFIG_ARCH_OMAP2430 +#ifdef CONFIG_SOC_OMAP2430 static struct map_desc omap243x_io_desc[] __initdata = { { .virtual = L4_WK_243X_VIRT, @@ -241,7 +241,7 @@ static void __init _omap2_map_common_io(void) omap_sram_init(); } -#ifdef CONFIG_ARCH_OMAP2420 +#ifdef CONFIG_SOC_OMAP2420 void __init omap242x_map_common_io(void) { iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc)); @@ -250,7 +250,7 @@ void __init omap242x_map_common_io(void) } #endif -#ifdef CONFIG_ARCH_OMAP2430 +#ifdef CONFIG_SOC_OMAP2430 void __init omap243x_map_common_io(void) { iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc)); diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index 394413dc7de..29b9dc3917a 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -310,7 +310,7 @@ struct omap_mbox mbox_dsp_info = { struct omap_mbox *omap3_mboxes[] = { &mbox_dsp_info, NULL }; #endif -#if defined(CONFIG_ARCH_OMAP2420) +#if defined(CONFIG_SOC_OMAP2420) /* IVA */ static struct omap_mbox2_priv omap2_mbox_iva_priv = { .tx_fifo = { diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index f9c9df5b5ff..0526b758bdc 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -104,7 +104,7 @@ EXPORT_SYMBOL(omap2_mcbsp_set_clks_src); /* Platform data */ -#ifdef CONFIG_ARCH_OMAP2420 +#ifdef CONFIG_SOC_OMAP2420 static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = { { .phys_base = OMAP24XX_MCBSP1_BASE, @@ -129,7 +129,7 @@ static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = { #define OMAP2420_MCBSP_REG_NUM 0 #endif -#ifdef CONFIG_ARCH_OMAP2430 +#ifdef CONFIG_SOC_OMAP2430 static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = { { .phys_base = OMAP24XX_MCBSP1_BASE, diff --git a/arch/arm/mach-omap2/opp2xxx.h b/arch/arm/mach-omap2/opp2xxx.h index 38b73055050..8affc66a92c 100644 --- a/arch/arm/mach-omap2/opp2xxx.h +++ b/arch/arm/mach-omap2/opp2xxx.h @@ -418,7 +418,7 @@ struct prcm_config { extern const struct prcm_config omap2420_rate_table[]; -#ifdef CONFIG_ARCH_OMAP2430 +#ifdef CONFIG_SOC_OMAP2430 extern const struct prcm_config omap2430_rate_table[]; #else #define omap2430_rate_table NULL diff --git a/arch/arm/mach-omap2/powerdomains2xxx_data.c b/arch/arm/mach-omap2/powerdomains2xxx_data.c index 9b1a3350057..78739e10f5b 100644 --- a/arch/arm/mach-omap2/powerdomains2xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains2xxx_data.c @@ -78,7 +78,7 @@ static struct powerdomain core_24xx_pwrdm = { * 2430-specific powerdomains */ -#ifdef CONFIG_ARCH_OMAP2430 +#ifdef CONFIG_SOC_OMAP2430 /* XXX 2430 KILLDOMAINWKUP bit? No current users apparently */ @@ -97,7 +97,7 @@ static struct powerdomain mdm_pwrdm = { }, }; -#endif /* CONFIG_ARCH_OMAP2430 */ +#endif /* CONFIG_SOC_OMAP2430 */ /* As powerdomains are added or removed above, this list must also be changed */ static struct powerdomain *powerdomains_omap2xxx[] __initdata = { @@ -111,7 +111,7 @@ static struct powerdomain *powerdomains_omap2xxx[] __initdata = { &core_24xx_pwrdm, #endif -#ifdef CONFIG_ARCH_OMAP2430 +#ifdef CONFIG_SOC_OMAP2430 &mdm_pwrdm, #endif NULL diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c index 862dda95d61..f7fed608019 100644 --- a/arch/arm/plat-omap/counter_32k.c +++ b/arch/arm/plat-omap/counter_32k.c @@ -54,7 +54,7 @@ static cycle_t notrace omap16xx_32k_read(struct clocksource *cs) #define omap16xx_32k_read NULL #endif -#ifdef CONFIG_ARCH_OMAP2420 +#ifdef CONFIG_SOC_OMAP2420 static cycle_t notrace omap2420_32k_read(struct clocksource *cs) { return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10) - offset_32k; @@ -63,7 +63,7 @@ static cycle_t notrace omap2420_32k_read(struct clocksource *cs) #define omap2420_32k_read NULL #endif -#ifdef CONFIG_ARCH_OMAP2430 +#ifdef CONFIG_SOC_OMAP2430 static cycle_t notrace omap2430_32k_read(struct clocksource *cs) { return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10) - offset_32k; diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 3fd8b405572..73d91ee43de 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -170,11 +170,11 @@ IS_OMAP_SUBCLASS(443x, 0x443) # undef cpu_is_omap24xx # define cpu_is_omap24xx() is_omap24xx() # endif -# if defined (CONFIG_ARCH_OMAP2420) +# if defined (CONFIG_SOC_OMAP2420) # undef cpu_is_omap242x # define cpu_is_omap242x() is_omap242x() # endif -# if defined (CONFIG_ARCH_OMAP2430) +# if defined (CONFIG_SOC_OMAP2430) # undef cpu_is_omap243x # define cpu_is_omap243x() is_omap243x() # endif @@ -189,11 +189,11 @@ IS_OMAP_SUBCLASS(443x, 0x443) # undef cpu_is_omap24xx # define cpu_is_omap24xx() 1 # endif -# if defined(CONFIG_ARCH_OMAP2420) +# if defined(CONFIG_SOC_OMAP2420) # undef cpu_is_omap242x # define cpu_is_omap242x() 1 # endif -# if defined(CONFIG_ARCH_OMAP2430) +# if defined(CONFIG_SOC_OMAP2430) # undef cpu_is_omap243x # define cpu_is_omap243x() 1 # endif @@ -201,7 +201,7 @@ IS_OMAP_SUBCLASS(443x, 0x443) # undef cpu_is_omap34xx # define cpu_is_omap34xx() 1 # endif -# if defined(CONFIG_ARCH_OMAP3430) +# if defined(CONFIG_SOC_OMAP3430) # undef cpu_is_omap343x # define cpu_is_omap343x() 1 # endif diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h index ef4106c1318..478c5d9b2bd 100644 --- a/arch/arm/plat-omap/include/plat/io.h +++ b/arch/arm/plat-omap/include/plat/io.h @@ -259,7 +259,7 @@ struct omap_sdrc_params; extern void omap1_map_common_io(void); extern void omap1_init_common_hw(void); -#ifdef CONFIG_ARCH_OMAP2420 +#ifdef CONFIG_SOC_OMAP2420 extern void omap242x_map_common_io(void); #else static inline void omap242x_map_common_io(void) @@ -267,7 +267,7 @@ static inline void omap242x_map_common_io(void) } #endif -#ifdef CONFIG_ARCH_OMAP2430 +#ifdef CONFIG_SOC_OMAP2430 extern void omap243x_map_common_io(void); #else static inline void omap243x_map_common_io(void) diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h index ffd909fa528..999ffba2690 100644 --- a/arch/arm/plat-omap/include/plat/multi.h +++ b/arch/arm/plat-omap/include/plat/multi.h @@ -66,7 +66,7 @@ # error "OMAP1 and OMAP2PLUS can't be selected at the same time" # endif #endif -#ifdef CONFIG_ARCH_OMAP2420 +#ifdef CONFIG_SOC_OMAP2420 # ifdef OMAP_NAME # undef MULTI_OMAP2 # define MULTI_OMAP2 @@ -74,7 +74,7 @@ # define OMAP_NAME omap2420 # endif #endif -#ifdef CONFIG_ARCH_OMAP2430 +#ifdef CONFIG_SOC_OMAP2430 # ifdef OMAP_NAME # undef MULTI_OMAP2 # define MULTI_OMAP2 diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index e26e50487d6..aedcb3be4e6 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -312,7 +312,7 @@ u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass) } #endif -#ifdef CONFIG_ARCH_OMAP2420 +#ifdef CONFIG_SOC_OMAP2420 static int __init omap242x_sram_init(void) { _omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init, @@ -333,7 +333,7 @@ static inline int omap242x_sram_init(void) } #endif -#ifdef CONFIG_ARCH_OMAP2430 +#ifdef CONFIG_SOC_OMAP2430 static int __init omap243x_sram_init(void) { _omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init, -- cgit v1.2.3-18-g5258 From 790a26f65bac8ddb7dc4a4685aebe46430a1c9b6 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 27 Jan 2011 16:39:41 -0800 Subject: arm: omap: i2c: fix compile warning Fix the following compile warning: arch/arm/plat-omap/i2c.c:120:13: warning: 'omap_pm_set_max_mpu_wakeup_lat_compat' defined but not used arch/arm/plat-omap/i2c.c:125:38: warning: 'omap_i2c_latency' defined but not used Signed-off-by: Felipe Balbi Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/i2c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index a4f8003de66..3341ca4703e 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -112,6 +112,7 @@ static inline int omap1_i2c_add_bus(int bus_id) } +#ifdef CONFIG_ARCH_OMAP2PLUS /* * XXX This function is a temporary compatibility wrapper - only * needed until the I2C driver can be converted to call @@ -130,7 +131,6 @@ static struct omap_device_pm_latency omap_i2c_latency[] = { }, }; -#ifdef CONFIG_ARCH_OMAP2PLUS static inline int omap2_i2c_add_bus(int bus_id) { int l; -- cgit v1.2.3-18-g5258 From ae3126edfc7bcef7cc064acc1bf33c3ac148c5df Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 27 Jan 2011 16:39:41 -0800 Subject: arm: omap1: fix compile warning Fix the following compile warning: arch/arm/mach-omap1/board-palmte.c:233:13: warning: 'palmte_headphones_detect' defined but not used Signed-off-by: Felipe Balbi Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-palmte.c | 13 ------------- 1 file changed, 13 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index fb51ce6123d..c9d38f47845 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -230,19 +230,6 @@ static struct spi_board_info palmte_spi_info[] __initdata = { }, }; -static void palmte_headphones_detect(void *data, int state) -{ - if (state) { - /* Headphones connected, disable speaker */ - gpio_set_value(PALMTE_SPEAKER_GPIO, 0); - printk(KERN_INFO "PM: speaker off\n"); - } else { - /* Headphones unplugged, re-enable speaker */ - gpio_set_value(PALMTE_SPEAKER_GPIO, 1); - printk(KERN_INFO "PM: speaker on\n"); - } -} - static void __init palmte_misc_gpio_setup(void) { /* Set TSC2102 PINTDAV pin as input (used by TSC2102 driver) */ -- cgit v1.2.3-18-g5258 From 58dfaba789dbba34b86ed7dbe1aa648294d63f0b Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 27 Jan 2011 16:39:41 -0800 Subject: arm: omap1: fix compile warnings Fix the following compile warnings: arch/arm/mach-omap1/board-innovator.c:165:3: warning: initialization makes integer from pointer without a cast arch/arm/mach-omap1/board-perseus2.c:305:3: warning: initialization makes integer from pointer without a cast arch/arm/mach-omap1/board-fsample.c:338:3: warning: initialization makes integer from pointer without a cast Signed-off-by: Felipe Balbi Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/fpga.h | 92 +++++++++++++++++----------------- 1 file changed, 46 insertions(+), 46 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/include/plat/fpga.h b/arch/arm/plat-omap/include/plat/fpga.h index ae39bcb3f5b..bd3c6324ae1 100644 --- a/arch/arm/plat-omap/include/plat/fpga.h +++ b/arch/arm/plat-omap/include/plat/fpga.h @@ -30,18 +30,18 @@ extern void omap1510_fpga_init_irq(void); * --------------------------------------------------------------------------- */ /* maps in the FPGA registers and the ETHR registers */ -#define H2P2_DBG_FPGA_BASE IOMEM(0xE8000000) /* VA */ +#define H2P2_DBG_FPGA_BASE 0xE8000000 /* VA */ #define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */ #define H2P2_DBG_FPGA_START 0x04000000 /* PA */ #define H2P2_DBG_FPGA_ETHR_START (H2P2_DBG_FPGA_START + 0x300) -#define H2P2_DBG_FPGA_FPGA_REV (H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */ -#define H2P2_DBG_FPGA_BOARD_REV (H2P2_DBG_FPGA_BASE + 0x12) /* Board Revision */ -#define H2P2_DBG_FPGA_GPIO (H2P2_DBG_FPGA_BASE + 0x14) /* GPIO outputs */ -#define H2P2_DBG_FPGA_LEDS (H2P2_DBG_FPGA_BASE + 0x16) /* LEDs outputs */ -#define H2P2_DBG_FPGA_MISC_INPUTS (H2P2_DBG_FPGA_BASE + 0x18) /* Misc inputs */ -#define H2P2_DBG_FPGA_LAN_STATUS (H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */ -#define H2P2_DBG_FPGA_LAN_RESET (H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */ +#define H2P2_DBG_FPGA_FPGA_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */ +#define H2P2_DBG_FPGA_BOARD_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x12) /* Board Revision */ +#define H2P2_DBG_FPGA_GPIO IOMEM(H2P2_DBG_FPGA_BASE + 0x14) /* GPIO outputs */ +#define H2P2_DBG_FPGA_LEDS IOMEM(H2P2_DBG_FPGA_BASE + 0x16) /* LEDs outputs */ +#define H2P2_DBG_FPGA_MISC_INPUTS IOMEM(H2P2_DBG_FPGA_BASE + 0x18) /* Misc inputs */ +#define H2P2_DBG_FPGA_LAN_STATUS IOMEM(H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */ +#define H2P2_DBG_FPGA_LAN_RESET IOMEM(H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */ /* NOTE: most boards don't have a static mapping for the FPGA ... */ struct h2p2_dbg_fpga { @@ -81,55 +81,55 @@ struct h2p2_dbg_fpga { * OMAP-1510 FPGA * --------------------------------------------------------------------------- */ -#define OMAP1510_FPGA_BASE IOMEM(0xE8000000) /* VA */ +#define OMAP1510_FPGA_BASE 0xE8000000 /* VA */ #define OMAP1510_FPGA_SIZE SZ_4K #define OMAP1510_FPGA_START 0x08000000 /* PA */ /* Revision */ -#define OMAP1510_FPGA_REV_LOW (OMAP1510_FPGA_BASE + 0x0) -#define OMAP1510_FPGA_REV_HIGH (OMAP1510_FPGA_BASE + 0x1) +#define OMAP1510_FPGA_REV_LOW IOMEM(OMAP1510_FPGA_BASE + 0x0) +#define OMAP1510_FPGA_REV_HIGH IOMEM(OMAP1510_FPGA_BASE + 0x1) -#define OMAP1510_FPGA_LCD_PANEL_CONTROL (OMAP1510_FPGA_BASE + 0x2) -#define OMAP1510_FPGA_LED_DIGIT (OMAP1510_FPGA_BASE + 0x3) -#define INNOVATOR_FPGA_HID_SPI (OMAP1510_FPGA_BASE + 0x4) -#define OMAP1510_FPGA_POWER (OMAP1510_FPGA_BASE + 0x5) +#define OMAP1510_FPGA_LCD_PANEL_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x2) +#define OMAP1510_FPGA_LED_DIGIT IOMEM(OMAP1510_FPGA_BASE + 0x3) +#define INNOVATOR_FPGA_HID_SPI IOMEM(OMAP1510_FPGA_BASE + 0x4) +#define OMAP1510_FPGA_POWER IOMEM(OMAP1510_FPGA_BASE + 0x5) /* Interrupt status */ -#define OMAP1510_FPGA_ISR_LO (OMAP1510_FPGA_BASE + 0x6) -#define OMAP1510_FPGA_ISR_HI (OMAP1510_FPGA_BASE + 0x7) +#define OMAP1510_FPGA_ISR_LO IOMEM(OMAP1510_FPGA_BASE + 0x6) +#define OMAP1510_FPGA_ISR_HI IOMEM(OMAP1510_FPGA_BASE + 0x7) /* Interrupt mask */ -#define OMAP1510_FPGA_IMR_LO (OMAP1510_FPGA_BASE + 0x8) -#define OMAP1510_FPGA_IMR_HI (OMAP1510_FPGA_BASE + 0x9) +#define OMAP1510_FPGA_IMR_LO IOMEM(OMAP1510_FPGA_BASE + 0x8) +#define OMAP1510_FPGA_IMR_HI IOMEM(OMAP1510_FPGA_BASE + 0x9) /* Reset registers */ -#define OMAP1510_FPGA_HOST_RESET (OMAP1510_FPGA_BASE + 0xa) -#define OMAP1510_FPGA_RST (OMAP1510_FPGA_BASE + 0xb) - -#define OMAP1510_FPGA_AUDIO (OMAP1510_FPGA_BASE + 0xc) -#define OMAP1510_FPGA_DIP (OMAP1510_FPGA_BASE + 0xe) -#define OMAP1510_FPGA_FPGA_IO (OMAP1510_FPGA_BASE + 0xf) -#define OMAP1510_FPGA_UART1 (OMAP1510_FPGA_BASE + 0x14) -#define OMAP1510_FPGA_UART2 (OMAP1510_FPGA_BASE + 0x15) -#define OMAP1510_FPGA_OMAP1510_STATUS (OMAP1510_FPGA_BASE + 0x16) -#define OMAP1510_FPGA_BOARD_REV (OMAP1510_FPGA_BASE + 0x18) -#define OMAP1510P1_PPT_DATA (OMAP1510_FPGA_BASE + 0x100) -#define OMAP1510P1_PPT_STATUS (OMAP1510_FPGA_BASE + 0x101) -#define OMAP1510P1_PPT_CONTROL (OMAP1510_FPGA_BASE + 0x102) - -#define OMAP1510_FPGA_TOUCHSCREEN (OMAP1510_FPGA_BASE + 0x204) - -#define INNOVATOR_FPGA_INFO (OMAP1510_FPGA_BASE + 0x205) -#define INNOVATOR_FPGA_LCD_BRIGHT_LO (OMAP1510_FPGA_BASE + 0x206) -#define INNOVATOR_FPGA_LCD_BRIGHT_HI (OMAP1510_FPGA_BASE + 0x207) -#define INNOVATOR_FPGA_LED_GRN_LO (OMAP1510_FPGA_BASE + 0x208) -#define INNOVATOR_FPGA_LED_GRN_HI (OMAP1510_FPGA_BASE + 0x209) -#define INNOVATOR_FPGA_LED_RED_LO (OMAP1510_FPGA_BASE + 0x20a) -#define INNOVATOR_FPGA_LED_RED_HI (OMAP1510_FPGA_BASE + 0x20b) -#define INNOVATOR_FPGA_CAM_USB_CONTROL (OMAP1510_FPGA_BASE + 0x20c) -#define INNOVATOR_FPGA_EXP_CONTROL (OMAP1510_FPGA_BASE + 0x20d) -#define INNOVATOR_FPGA_ISR2 (OMAP1510_FPGA_BASE + 0x20e) -#define INNOVATOR_FPGA_IMR2 (OMAP1510_FPGA_BASE + 0x210) +#define OMAP1510_FPGA_HOST_RESET IOMEM(OMAP1510_FPGA_BASE + 0xa) +#define OMAP1510_FPGA_RST IOMEM(OMAP1510_FPGA_BASE + 0xb) + +#define OMAP1510_FPGA_AUDIO IOMEM(OMAP1510_FPGA_BASE + 0xc) +#define OMAP1510_FPGA_DIP IOMEM(OMAP1510_FPGA_BASE + 0xe) +#define OMAP1510_FPGA_FPGA_IO IOMEM(OMAP1510_FPGA_BASE + 0xf) +#define OMAP1510_FPGA_UART1 IOMEM(OMAP1510_FPGA_BASE + 0x14) +#define OMAP1510_FPGA_UART2 IOMEM(OMAP1510_FPGA_BASE + 0x15) +#define OMAP1510_FPGA_OMAP1510_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x16) +#define OMAP1510_FPGA_BOARD_REV IOMEM(OMAP1510_FPGA_BASE + 0x18) +#define OMAP1510P1_PPT_DATA IOMEM(OMAP1510_FPGA_BASE + 0x100) +#define OMAP1510P1_PPT_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x101) +#define OMAP1510P1_PPT_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x102) + +#define OMAP1510_FPGA_TOUCHSCREEN IOMEM(OMAP1510_FPGA_BASE + 0x204) + +#define INNOVATOR_FPGA_INFO IOMEM(OMAP1510_FPGA_BASE + 0x205) +#define INNOVATOR_FPGA_LCD_BRIGHT_LO IOMEM(OMAP1510_FPGA_BASE + 0x206) +#define INNOVATOR_FPGA_LCD_BRIGHT_HI IOMEM(OMAP1510_FPGA_BASE + 0x207) +#define INNOVATOR_FPGA_LED_GRN_LO IOMEM(OMAP1510_FPGA_BASE + 0x208) +#define INNOVATOR_FPGA_LED_GRN_HI IOMEM(OMAP1510_FPGA_BASE + 0x209) +#define INNOVATOR_FPGA_LED_RED_LO IOMEM(OMAP1510_FPGA_BASE + 0x20a) +#define INNOVATOR_FPGA_LED_RED_HI IOMEM(OMAP1510_FPGA_BASE + 0x20b) +#define INNOVATOR_FPGA_CAM_USB_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20c) +#define INNOVATOR_FPGA_EXP_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20d) +#define INNOVATOR_FPGA_ISR2 IOMEM(OMAP1510_FPGA_BASE + 0x20e) +#define INNOVATOR_FPGA_IMR2 IOMEM(OMAP1510_FPGA_BASE + 0x210) #define OMAP1510_FPGA_ETHR_START (OMAP1510_FPGA_START + 0x300) -- cgit v1.2.3-18-g5258 From bdc58fb950a3a1b0bc3cbd8e23d21ecdde2ac9a2 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 27 Jan 2011 16:39:42 -0800 Subject: arm: omap1: fix a bunch of section mismatches Fix the following section mismatches: WARNING: arch/arm/mach-omap1/built-in.o(.data+0x491c): Section mismatch in reference from the variable fsample_config to the (unknown reference) .init.data:(unknown) The variable fsample_config references the (unknown reference) __initdata (unknown) If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, WARNING: arch/arm/mach-omap1/built-in.o(.data+0x8f0c): Section mismatch in reference from the variable ams_delta_config to the (unknown reference) .init.data:(unknown) The variable ams_delta_config references the (unknown reference) __initdata (unknown) If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, WARNING: arch/arm/mach-omap1/built-in.o(.data+0x93ac): Section mismatch in reference from the variable ams_delta_camera_device to the (unknown reference) .init.data:(unknown) The variable ams_delta_camera_device references the (unknown reference) __initdata (unknown) If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, WARNING: vmlinux.o(.data+0x5e94): Section mismatch in reference from the variable fsample_config to the (unknown reference) .init.data:(unknown) The variable fsample_config references the (unknown reference) __initdata (unknown) If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, WARNING: vmlinux.o(.data+0xa484): Section mismatch in reference from the variable ams_delta_config to the (unknown reference) .init.data:(unknown) The variable ams_delta_config references the (unknown reference) __initdata (unknown) If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, WARNING: vmlinux.o(.data+0xa924): Section mismatch in reference from the variable ams_delta_camera_device to the (unknown reference) .init.data:(unknown) The variable ams_delta_camera_device references the (unknown reference) __initdata (unknown) If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Signed-off-by: Felipe Balbi Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-ams-delta.c | 14 +++++++------- arch/arm/mach-omap1/board-fsample.c | 2 +- 2 files changed, 8 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 22cc8c8df6c..2f446a2658a 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -165,7 +165,7 @@ static struct map_desc ams_delta_io_desc[] __initdata = { } }; -static struct omap_lcd_config ams_delta_lcd_config __initdata = { +static struct omap_lcd_config ams_delta_lcd_config = { .ctrl_name = "internal", }; @@ -208,14 +208,14 @@ static const struct matrix_keymap_data ams_delta_keymap_data = { .keymap_size = ARRAY_SIZE(ams_delta_keymap), }; -static struct omap_kp_platform_data ams_delta_kp_data = { +static struct omap_kp_platform_data ams_delta_kp_data __initdata = { .rows = 8, .cols = 8, .keymap_data = &ams_delta_keymap_data, .delay = 9, }; -static struct platform_device ams_delta_kp_device = { +static struct platform_device ams_delta_kp_device __initdata = { .name = "omap-keypad", .id = -1, .dev = { @@ -225,12 +225,12 @@ static struct platform_device ams_delta_kp_device = { .resource = ams_delta_kp_resources, }; -static struct platform_device ams_delta_lcd_device = { +static struct platform_device ams_delta_lcd_device __initdata = { .name = "lcd_ams_delta", .id = -1, }; -static struct platform_device ams_delta_led_device = { +static struct platform_device ams_delta_led_device __initdata = { .name = "ams-delta-led", .id = -1 }; @@ -259,7 +259,7 @@ static int ams_delta_camera_power(struct device *dev, int power) #define ams_delta_camera_power NULL #endif -static struct soc_camera_link __initdata ams_delta_iclink = { +static struct soc_camera_link ams_delta_iclink __initdata = { .bus_id = 0, /* OMAP1 SoC camera bus */ .i2c_adapter_id = 1, .board_info = &ams_delta_camera_board_info[0], @@ -267,7 +267,7 @@ static struct soc_camera_link __initdata ams_delta_iclink = { .power = ams_delta_camera_power, }; -static struct platform_device ams_delta_camera_device = { +static struct platform_device ams_delta_camera_device __initdata = { .name = "soc-camera-pdrv", .id = 0, .dev = { diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 0efb9dbae44..27fb1be0f20 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -287,7 +287,7 @@ static struct platform_device *devices[] __initdata = { &lcd_device, }; -static struct omap_lcd_config fsample_lcd_config __initdata = { +static struct omap_lcd_config fsample_lcd_config = { .ctrl_name = "internal", }; -- cgit v1.2.3-18-g5258 From ee23b93dff539b82fd9e225e5235ee6d2fb01346 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 27 Jan 2011 16:39:43 -0800 Subject: arm: omap2: irq: fix compile warning: Fix the following compile warning: arch/arm/mach-omap2/irq.c:64:31: warning: 'intc_context' defined but not used Signed-off-by: Felipe Balbi Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/irq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 23049c487c4..d151aac291c 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -61,8 +61,6 @@ struct omap3_intc_regs { u32 mir[INTCPS_NR_MIR_REGS]; }; -static struct omap3_intc_regs intc_context[ARRAY_SIZE(irq_banks)]; - /* INTC bank register get/set */ static void intc_bank_write_reg(u32 val, struct omap_irq_bank *bank, u16 reg) @@ -229,6 +227,8 @@ void __init omap_init_irq(void) } #ifdef CONFIG_ARCH_OMAP3 +static struct omap3_intc_regs intc_context[ARRAY_SIZE(irq_banks)]; + void omap_intc_save_context(void) { int ind = 0, i = 0; -- cgit v1.2.3-18-g5258 From c77675827206661943237fdc237abb7a79797d6b Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Thu, 27 Jan 2011 16:39:43 -0800 Subject: arm: plat-omap: dma: make omap_dma_in_1510_mode() static Eliminates the following sparse warning: arch/arm/plat-omap/dma.c:137:5: warning: symbol 'omap_dma_in_1510_mode' was not declared. Should it be static? Signed-off-by: Aaro Koskinen Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 85363084cc1..2ec3b5d9f21 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -134,7 +134,7 @@ static inline void omap_enable_channel_irq(int lch); #ifdef CONFIG_ARCH_OMAP15XX /* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */ -int omap_dma_in_1510_mode(void) +static int omap_dma_in_1510_mode(void) { return enable_1510_mode; } -- cgit v1.2.3-18-g5258 From 5db98f75f91006eaa37db3e13e320155225990e2 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Thu, 27 Jan 2011 16:39:43 -0800 Subject: arm: mach-omap1: board-h2: make h2_nand_platdata static Eliminates the following sparse warning: arch/arm/mach-omap1/board-h2.c:205:27: warning: symbol 'h2_nand_platdata' was not declared. Should it be static? Signed-off-by: Aaro Koskinen Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-h2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 28b84aa9bdb..ba3bd09c475 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -202,7 +202,7 @@ static int h2_nand_dev_ready(struct mtd_info *mtd) static const char *h2_part_probes[] = { "cmdlinepart", NULL }; -struct platform_nand_data h2_nand_platdata = { +static struct platform_nand_data h2_nand_platdata = { .chip = { .nr_chips = 1, .chip_offset = 0, -- cgit v1.2.3-18-g5258 From 04023542f81b80295aac454b76f6a40b207ddc21 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Thu, 27 Jan 2011 16:39:44 -0800 Subject: arm: mach-omap1: board-innovator: make innovator_mmc_init() static Eliminates the following sparse warning: arch/arm/mach-omap1/board-innovator.c:368:13: warning: symbol 'innovator_mmc_init' was not declared. Should it be static? Signed-off-by: Aaro Koskinen Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-innovator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index a36e6742bf9..2d9b8cbd7a1 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -365,7 +365,7 @@ static struct omap_mmc_platform_data mmc1_data = { static struct omap_mmc_platform_data *mmc_data[OMAP16XX_NR_MMC]; -void __init innovator_mmc_init(void) +static void __init innovator_mmc_init(void) { mmc_data[0] = &mmc1_data; omap1_init_mmc(mmc_data, OMAP15XX_NR_MMC); -- cgit v1.2.3-18-g5258 From 140089da7e5e55012afe1e550c93e155c3a4e716 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Thu, 27 Jan 2011 16:39:44 -0800 Subject: arm: mach-omap1: board-htcherald: make htcpld_chips and htcpld_pfdata static Eliminates the following sparse warnings: arch/arm/mach-omap1/board-htcherald.c:334:34: warning: symbol 'htcpld_chips' was not declared. Should it be static? arch/arm/mach-omap1/board-htcherald.c:369:34: warning: symbol 'htcpld_pfdata' was not declared. Should it be static? Signed-off-by: Aaro Koskinen Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-htcherald.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index f2c5c585bc8..ba05a51f940 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -331,7 +331,7 @@ static struct resource htcpld_resources[] = { }, }; -struct htcpld_chip_platform_data htcpld_chips[] = { +static struct htcpld_chip_platform_data htcpld_chips[] = { [0] = { .addr = 0x03, .reset = 0x04, @@ -366,7 +366,7 @@ struct htcpld_chip_platform_data htcpld_chips[] = { }, }; -struct htcpld_core_platform_data htcpld_pfdata = { +static struct htcpld_core_platform_data htcpld_pfdata = { .int_reset_gpio_hi = HTCPLD_GPIO_INT_RESET_HI, .int_reset_gpio_lo = HTCPLD_GPIO_INT_RESET_LO, .i2c_adapter_id = 1, -- cgit v1.2.3-18-g5258 From 277a28567fe928bd94e9953a187002f5041c34a4 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Thu, 27 Jan 2011 16:39:44 -0800 Subject: arm: mach-omap1: board-h3: make nand_platdata static Eliminates the following sparse warning: arch/arm/mach-omap1/board-h3.c:207:27: warning: symbol 'nand_platdata' was not declared. Should it be static? Signed-off-by: Aaro Koskinen Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-h3.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index dbc8b8d882b..ac48677672e 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -204,7 +204,7 @@ static int nand_dev_ready(struct mtd_info *mtd) static const char *part_probes[] = { "cmdlinepart", NULL }; -struct platform_nand_data nand_platdata = { +static struct platform_nand_data nand_platdata = { .chip = { .nr_chips = 1, .chip_offset = 0, -- cgit v1.2.3-18-g5258 From ee54dba9c360944b34e06478c05c6f283bf64eda Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Thu, 27 Jan 2011 16:39:45 -0800 Subject: ARM: OMAP: Allow platforms to hook reset cleanly This adds a clean method to allow platforms to hook into the reset code if they require to. Signed-off-by: Russell King Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/Makefile | 2 +- arch/arm/mach-omap1/board-voiceblue.c | 106 +++++++++++++++++-------------- arch/arm/mach-omap1/reset.c | 25 ++++++++ arch/arm/mach-omap2/prcm.c | 5 +- arch/arm/plat-omap/include/plat/prcm.h | 1 - arch/arm/plat-omap/include/plat/system.h | 38 +---------- 6 files changed, 91 insertions(+), 86 deletions(-) create mode 100644 arch/arm/mach-omap1/reset.c (limited to 'arch') diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index ba6009f2767..af98117043d 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -4,7 +4,7 @@ # Common support obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o -obj-y += clock.o clock_data.o opp_data.o +obj-y += clock.o clock_data.o opp_data.o reset.o obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 815a69ce821..67128171409 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -26,6 +26,7 @@ #include #include +#include #include #include #include @@ -163,52 +164,6 @@ static void __init voiceblue_init_irq(void) omap_init_irq(); } -static void __init voiceblue_init(void) -{ - /* mux pins for uarts */ - omap_cfg_reg(UART1_TX); - omap_cfg_reg(UART1_RTS); - omap_cfg_reg(UART2_TX); - omap_cfg_reg(UART2_RTS); - omap_cfg_reg(UART3_TX); - omap_cfg_reg(UART3_RX); - - /* Watchdog */ - gpio_request(0, "Watchdog"); - /* smc91x reset */ - gpio_request(7, "SMC91x reset"); - gpio_direction_output(7, 1); - udelay(2); /* wait at least 100ns */ - gpio_set_value(7, 0); - mdelay(50); /* 50ms until PHY ready */ - /* smc91x interrupt pin */ - gpio_request(8, "SMC91x irq"); - /* 16C554 reset*/ - gpio_request(6, "16C554 reset"); - gpio_direction_output(6, 0); - /* 16C554 interrupt pins */ - gpio_request(12, "16C554 irq"); - gpio_request(13, "16C554 irq"); - gpio_request(14, "16C554 irq"); - gpio_request(15, "16C554 irq"); - set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING); - set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING); - set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING); - set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING); - - platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices)); - omap_board_config = voiceblue_config; - omap_board_config_size = ARRAY_SIZE(voiceblue_config); - omap_serial_init(); - omap1_usb_init(&voiceblue_usb_config); - omap_register_i2c_bus(1, 100, NULL, 0); - - /* There is a good chance board is going up, so enable power LED - * (it is connected through invertor) */ - omap_writeb(0x00, OMAP_LPG1_LCR); - omap_writeb(0x00, OMAP_LPG1_PMR); /* Disable clock */ -} - static void __init voiceblue_map_io(void) { omap1_map_common_io(); @@ -275,8 +230,17 @@ void voiceblue_wdt_ping(void) gpio_set_value(0, wdt_gpio_state); } -void voiceblue_reset(void) +static void voiceblue_reset(char mode, const char *cmd) { + /* + * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28 + * "Global Software Reset Affects Traffic Controller Frequency". + */ + if (cpu_is_omap5912()) { + omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4), DPLL_CTL); + omap_writew(0x8, ARM_RSTCT1); + } + set_bit(MACHINE_REBOOT, &machine_state); voiceblue_wdt_enable(); while (1) ; @@ -286,6 +250,54 @@ EXPORT_SYMBOL(voiceblue_wdt_enable); EXPORT_SYMBOL(voiceblue_wdt_disable); EXPORT_SYMBOL(voiceblue_wdt_ping); +static void __init voiceblue_init(void) +{ + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + + /* Watchdog */ + gpio_request(0, "Watchdog"); + /* smc91x reset */ + gpio_request(7, "SMC91x reset"); + gpio_direction_output(7, 1); + udelay(2); /* wait at least 100ns */ + gpio_set_value(7, 0); + mdelay(50); /* 50ms until PHY ready */ + /* smc91x interrupt pin */ + gpio_request(8, "SMC91x irq"); + /* 16C554 reset*/ + gpio_request(6, "16C554 reset"); + gpio_direction_output(6, 0); + /* 16C554 interrupt pins */ + gpio_request(12, "16C554 irq"); + gpio_request(13, "16C554 irq"); + gpio_request(14, "16C554 irq"); + gpio_request(15, "16C554 irq"); + set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING); + set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING); + set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING); + set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING); + + platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices)); + omap_board_config = voiceblue_config; + omap_board_config_size = ARRAY_SIZE(voiceblue_config); + omap_serial_init(); + omap1_usb_init(&voiceblue_usb_config); + omap_register_i2c_bus(1, 100, NULL, 0); + + /* There is a good chance board is going up, so enable power LED + * (it is connected through invertor) */ + omap_writeb(0x00, OMAP_LPG1_LCR); + omap_writeb(0x00, OMAP_LPG1_PMR); /* Disable clock */ + + arch_reset = voiceblue_reset; +} + MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910") /* Maintainer: Ladislav Michl */ .boot_params = 0x10000100, diff --git a/arch/arm/mach-omap1/reset.c b/arch/arm/mach-omap1/reset.c new file mode 100644 index 00000000000..ad951ee6920 --- /dev/null +++ b/arch/arm/mach-omap1/reset.c @@ -0,0 +1,25 @@ +/* + * OMAP1 reset support + */ +#include +#include + +#include +#include +#include + +void omap1_arch_reset(char mode, const char *cmd) +{ + /* + * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28 + * "Global Software Reset Affects Traffic Controller Frequency". + */ + if (cpu_is_omap5912()) { + omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4), DPLL_CTL); + omap_writew(0x8, ARM_RSTCT1); + } + + omap_writew(1, ARM_RSTCT1); +} + +void (*arch_reset)(char, const char *) = omap1_arch_reset; diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index 679bcd28576..6be14389e4f 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -24,6 +24,7 @@ #include #include +#include #include #include #include @@ -57,7 +58,7 @@ u32 omap_prcm_get_reset_sources(void) EXPORT_SYMBOL(omap_prcm_get_reset_sources); /* Resets clock rates and reboots the system. Only called from system.h */ -void omap_prcm_arch_reset(char mode, const char *cmd) +static void omap_prcm_arch_reset(char mode, const char *cmd) { s16 prcm_offs = 0; @@ -108,6 +109,8 @@ void omap_prcm_arch_reset(char mode, const char *cmd) omap2_prm_read_mod_reg(prcm_offs, OMAP2_RM_RSTCTRL); /* OCP barrier */ } +void (*arch_reset)(char, const char *) = omap_prcm_arch_reset; + /** * omap2_cm_wait_idlest - wait for IDLEST bit to indicate module readiness * @reg: physical address of module IDLEST register diff --git a/arch/arm/plat-omap/include/plat/prcm.h b/arch/arm/plat-omap/include/plat/prcm.h index 2fdf8c80d39..267f43bb2a4 100644 --- a/arch/arm/plat-omap/include/plat/prcm.h +++ b/arch/arm/plat-omap/include/plat/prcm.h @@ -28,7 +28,6 @@ #define __ASM_ARM_ARCH_OMAP_PRCM_H u32 omap_prcm_get_reset_sources(void); -void omap_prcm_arch_reset(char mode, const char *cmd); int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest, const char *name); diff --git a/arch/arm/plat-omap/include/plat/system.h b/arch/arm/plat-omap/include/plat/system.h index d0a119f735b..c5fa9e92900 100644 --- a/arch/arm/plat-omap/include/plat/system.h +++ b/arch/arm/plat-omap/include/plat/system.h @@ -4,48 +4,14 @@ */ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include -#include -#include - -#include - -#ifndef CONFIG_MACH_VOICEBLUE -#define voiceblue_reset() do {} while (0) -#else -extern void voiceblue_reset(void); -#endif +#include static inline void arch_idle(void) { cpu_do_idle(); } -static inline void omap1_arch_reset(char mode, const char *cmd) -{ - /* - * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28 - * "Global Software Reset Affects Traffic Controller Frequency". - */ - if (cpu_is_omap5912()) { - omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4), - DPLL_CTL); - omap_writew(0x8, ARM_RSTCT1); - } - - if (machine_is_voiceblue()) - voiceblue_reset(); - else - omap_writew(1, ARM_RSTCT1); -} - -static inline void arch_reset(char mode, const char *cmd) -{ - if (!cpu_class_is_omap2()) - omap1_arch_reset(mode, cmd); - else - omap_prcm_arch_reset(mode, cmd); -} +extern void (*arch_reset)(char, const char *); #endif -- cgit v1.2.3-18-g5258 From 232bc6514fbf67abdaec1899a6d818c1dc70cbd6 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Thu, 27 Jan 2011 16:39:45 -0800 Subject: arm: mach-omap1: board-voiceblue: add missing include Eliminates the following sparse warnings: arch/arm/mach-omap1/board-voiceblue.c:253:6: warning: symbol 'voiceblue_wdt_enable' was not declared. Should it be static? arch/arm/mach-omap1/board-voiceblue.c:261:6: warning: symbol 'voiceblue_wdt_disable' was not declared. Should it be static? arch/arm/mach-omap1/board-voiceblue.c:269:6: warning: symbol 'voiceblue_wdt_ping' was not declared. Should it be static? arch/arm/mach-omap1/board-voiceblue.c:278:6: warning: symbol 'voiceblue_reset' was not declared. Should it be static? Signed-off-by: Aaro Koskinen Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-voiceblue.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 67128171409..bdc0ac8dc21 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -31,6 +31,7 @@ #include #include +#include #include #include #include -- cgit v1.2.3-18-g5258 From cd7bb53ff88a5acef942a87c1d04e6211b6470dc Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 28 Jan 2011 15:14:08 +0900 Subject: sh: Fix up async PCIe probing on SMP. For the SMP case we run in to a lockup without a full synchronization prior to continuing with the boot. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/pcie-sh7786.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/sh/drivers/pci/pcie-sh7786.c b/arch/sh/drivers/pci/pcie-sh7786.c index ada2e6926f0..4418f9070ed 100644 --- a/arch/sh/drivers/pci/pcie-sh7786.c +++ b/arch/sh/drivers/pci/pcie-sh7786.c @@ -571,6 +571,8 @@ static int __init sh7786_pcie_init(void) async_schedule(sh7786_pcie_hwops->port_init_hw, port); } + async_synchronize_full(); + return 0; } arch_initcall(sh7786_pcie_init); -- cgit v1.2.3-18-g5258 From ef19660b0aac537928a13a4087908cc23fa4c002 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 24 Jan 2011 12:57:46 +0100 Subject: ARM i.MX23/28: deobfuscate gpio initialization Signed-off-by: Sascha Hauer Acked-by: Shawn Guo Acked-by: Wolfram Sang --- arch/arm/mach-mxs/gpio.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mxs/gpio.c b/arch/arm/mach-mxs/gpio.c index d7ad7a61366..36df2d75174 100644 --- a/arch/arm/mach-mxs/gpio.c +++ b/arch/arm/mach-mxs/gpio.c @@ -297,20 +297,17 @@ int __init mxs_gpio_init(struct mxs_gpio_port *port, int cnt) .virtual_irq_start = MXS_GPIO_IRQ_START + (_id) * 32, \ } -#define DEFINE_REGISTER_FUNCTION(prefix) \ -int __init prefix ## _register_gpios(void) \ -{ \ - return mxs_gpio_init(prefix ## _gpio_ports, \ - ARRAY_SIZE(prefix ## _gpio_ports)); \ -} - #ifdef CONFIG_SOC_IMX23 static struct mxs_gpio_port mx23_gpio_ports[] = { DEFINE_MXS_GPIO_PORT(MX23, 0), DEFINE_MXS_GPIO_PORT(MX23, 1), DEFINE_MXS_GPIO_PORT(MX23, 2), }; -DEFINE_REGISTER_FUNCTION(mx23) + +int __init mx23_register_gpios(void) +{ + return mxs_gpio_init(mx23_gpio_ports, ARRAY_SIZE(mx23_gpio_ports)); +} #endif #ifdef CONFIG_SOC_IMX28 @@ -321,5 +318,9 @@ static struct mxs_gpio_port mx28_gpio_ports[] = { DEFINE_MXS_GPIO_PORT(MX28, 3), DEFINE_MXS_GPIO_PORT(MX28, 4), }; -DEFINE_REGISTER_FUNCTION(mx28) + +int __init mx28_register_gpios(void) +{ + return mxs_gpio_init(mx28_gpio_ports, ARRAY_SIZE(mx28_gpio_ports)); +} #endif -- cgit v1.2.3-18-g5258 From 0e8b462de06e0559fc7c5a73d1d913782397987d Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 24 Jan 2011 13:09:41 +0100 Subject: ARM i.MX23/28: do not use complicated macros if not necessary Get rid of ## preprocessor construct where it only makes the code harder to read. Signed-off-by: Sascha Hauer Acked-by: Shawn Guo Acked-by: Wolfram Sang --- arch/arm/mach-mxs/gpio.c | 26 ++++++++++++++------------ 1 file changed, 14 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mxs/gpio.c b/arch/arm/mach-mxs/gpio.c index 36df2d75174..8bcb3404225 100644 --- a/arch/arm/mach-mxs/gpio.c +++ b/arch/arm/mach-mxs/gpio.c @@ -287,21 +287,23 @@ int __init mxs_gpio_init(struct mxs_gpio_port *port, int cnt) return 0; } -#define DEFINE_MXS_GPIO_PORT(soc, _id) \ +#define MX23_GPIO_BASE MX23_IO_ADDRESS(MX23_PINCTRL_BASE_ADDR) +#define MX28_GPIO_BASE MX28_IO_ADDRESS(MX28_PINCTRL_BASE_ADDR) + +#define DEFINE_MXS_GPIO_PORT(_base, _irq, _id) \ { \ .chip.label = "gpio-" #_id, \ .id = _id, \ - .irq = soc ## _INT_GPIO ## _id, \ - .base = soc ## _IO_ADDRESS( \ - soc ## _PINCTRL ## _BASE_ADDR), \ + .irq = _irq, \ + .base = _base, \ .virtual_irq_start = MXS_GPIO_IRQ_START + (_id) * 32, \ } #ifdef CONFIG_SOC_IMX23 static struct mxs_gpio_port mx23_gpio_ports[] = { - DEFINE_MXS_GPIO_PORT(MX23, 0), - DEFINE_MXS_GPIO_PORT(MX23, 1), - DEFINE_MXS_GPIO_PORT(MX23, 2), + DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO0, 0), + DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO1, 1), + DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO2, 2), }; int __init mx23_register_gpios(void) @@ -312,11 +314,11 @@ int __init mx23_register_gpios(void) #ifdef CONFIG_SOC_IMX28 static struct mxs_gpio_port mx28_gpio_ports[] = { - DEFINE_MXS_GPIO_PORT(MX28, 0), - DEFINE_MXS_GPIO_PORT(MX28, 1), - DEFINE_MXS_GPIO_PORT(MX28, 2), - DEFINE_MXS_GPIO_PORT(MX28, 3), - DEFINE_MXS_GPIO_PORT(MX28, 4), + DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO0, 0), + DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO1, 1), + DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO2, 2), + DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO3, 3), + DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO4, 4), }; int __init mx28_register_gpios(void) -- cgit v1.2.3-18-g5258 From d69934bc7bf677a51a13cdbcaa5eae45ea9e2fda Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 24 Jan 2011 09:04:27 +0100 Subject: ARM i.MX23: remove reserved register defines Signed-off-by: Sascha Hauer Acked-by: Shawn Guo Acked-by: Wolfram Sang --- arch/arm/mach-mxs/regs-clkctrl-mx23.h | 124 ---------------------------------- 1 file changed, 124 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mxs/regs-clkctrl-mx23.h b/arch/arm/mach-mxs/regs-clkctrl-mx23.h index dbc04747b69..0ea5c9d0e2b 100644 --- a/arch/arm/mach-mxs/regs-clkctrl-mx23.h +++ b/arch/arm/mach-mxs/regs-clkctrl-mx23.h @@ -33,10 +33,6 @@ #define HW_CLKCTRL_PLLCTRL0_CLR (0x00000008) #define HW_CLKCTRL_PLLCTRL0_TOG (0x0000000c) -#define BP_CLKCTRL_PLLCTRL0_RSRVD6 30 -#define BM_CLKCTRL_PLLCTRL0_RSRVD6 0xC0000000 -#define BF_CLKCTRL_PLLCTRL0_RSRVD6(v) \ - (((v) << 30) & BM_CLKCTRL_PLLCTRL0_RSRVD6) #define BP_CLKCTRL_PLLCTRL0_LFR_SEL 28 #define BM_CLKCTRL_PLLCTRL0_LFR_SEL 0x30000000 #define BF_CLKCTRL_PLLCTRL0_LFR_SEL(v) \ @@ -45,10 +41,6 @@ #define BV_CLKCTRL_PLLCTRL0_LFR_SEL__TIMES_2 0x1 #define BV_CLKCTRL_PLLCTRL0_LFR_SEL__TIMES_05 0x2 #define BV_CLKCTRL_PLLCTRL0_LFR_SEL__UNDEFINED 0x3 -#define BP_CLKCTRL_PLLCTRL0_RSRVD5 26 -#define BM_CLKCTRL_PLLCTRL0_RSRVD5 0x0C000000 -#define BF_CLKCTRL_PLLCTRL0_RSRVD5(v) \ - (((v) << 26) & BM_CLKCTRL_PLLCTRL0_RSRVD5) #define BP_CLKCTRL_PLLCTRL0_CP_SEL 24 #define BM_CLKCTRL_PLLCTRL0_CP_SEL 0x03000000 #define BF_CLKCTRL_PLLCTRL0_CP_SEL(v) \ @@ -57,10 +49,6 @@ #define BV_CLKCTRL_PLLCTRL0_CP_SEL__TIMES_2 0x1 #define BV_CLKCTRL_PLLCTRL0_CP_SEL__TIMES_05 0x2 #define BV_CLKCTRL_PLLCTRL0_CP_SEL__UNDEFINED 0x3 -#define BP_CLKCTRL_PLLCTRL0_RSRVD4 22 -#define BM_CLKCTRL_PLLCTRL0_RSRVD4 0x00C00000 -#define BF_CLKCTRL_PLLCTRL0_RSRVD4(v) \ - (((v) << 22) & BM_CLKCTRL_PLLCTRL0_RSRVD4) #define BP_CLKCTRL_PLLCTRL0_DIV_SEL 20 #define BM_CLKCTRL_PLLCTRL0_DIV_SEL 0x00300000 #define BF_CLKCTRL_PLLCTRL0_DIV_SEL(v) \ @@ -69,23 +57,13 @@ #define BV_CLKCTRL_PLLCTRL0_DIV_SEL__LOWER 0x1 #define BV_CLKCTRL_PLLCTRL0_DIV_SEL__LOWEST 0x2 #define BV_CLKCTRL_PLLCTRL0_DIV_SEL__UNDEFINED 0x3 -#define BM_CLKCTRL_PLLCTRL0_RSRVD3 0x00080000 #define BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS 0x00040000 -#define BM_CLKCTRL_PLLCTRL0_RSRVD2 0x00020000 #define BM_CLKCTRL_PLLCTRL0_POWER 0x00010000 -#define BP_CLKCTRL_PLLCTRL0_RSRVD1 0 -#define BM_CLKCTRL_PLLCTRL0_RSRVD1 0x0000FFFF -#define BF_CLKCTRL_PLLCTRL0_RSRVD1(v) \ - (((v) << 0) & BM_CLKCTRL_PLLCTRL0_RSRVD1) #define HW_CLKCTRL_PLLCTRL1 (0x00000010) #define BM_CLKCTRL_PLLCTRL1_LOCK 0x80000000 #define BM_CLKCTRL_PLLCTRL1_FORCE_LOCK 0x40000000 -#define BP_CLKCTRL_PLLCTRL1_RSRVD1 16 -#define BM_CLKCTRL_PLLCTRL1_RSRVD1 0x3FFF0000 -#define BF_CLKCTRL_PLLCTRL1_RSRVD1(v) \ - (((v) << 16) & BM_CLKCTRL_PLLCTRL1_RSRVD1) #define BP_CLKCTRL_PLLCTRL1_LOCK_COUNT 0 #define BM_CLKCTRL_PLLCTRL1_LOCK_COUNT 0x0000FFFF #define BF_CLKCTRL_PLLCTRL1_LOCK_COUNT(v) \ @@ -96,29 +74,15 @@ #define HW_CLKCTRL_CPU_CLR (0x00000028) #define HW_CLKCTRL_CPU_TOG (0x0000002c) -#define BP_CLKCTRL_CPU_RSRVD5 30 -#define BM_CLKCTRL_CPU_RSRVD5 0xC0000000 -#define BF_CLKCTRL_CPU_RSRVD5(v) \ - (((v) << 30) & BM_CLKCTRL_CPU_RSRVD5) #define BM_CLKCTRL_CPU_BUSY_REF_XTAL 0x20000000 #define BM_CLKCTRL_CPU_BUSY_REF_CPU 0x10000000 -#define BM_CLKCTRL_CPU_RSRVD4 0x08000000 #define BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN 0x04000000 #define BP_CLKCTRL_CPU_DIV_XTAL 16 #define BM_CLKCTRL_CPU_DIV_XTAL 0x03FF0000 #define BF_CLKCTRL_CPU_DIV_XTAL(v) \ (((v) << 16) & BM_CLKCTRL_CPU_DIV_XTAL) -#define BP_CLKCTRL_CPU_RSRVD3 13 -#define BM_CLKCTRL_CPU_RSRVD3 0x0000E000 -#define BF_CLKCTRL_CPU_RSRVD3(v) \ - (((v) << 13) & BM_CLKCTRL_CPU_RSRVD3) #define BM_CLKCTRL_CPU_INTERRUPT_WAIT 0x00001000 -#define BM_CLKCTRL_CPU_RSRVD2 0x00000800 #define BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN 0x00000400 -#define BP_CLKCTRL_CPU_RSRVD1 6 -#define BM_CLKCTRL_CPU_RSRVD1 0x000003C0 -#define BF_CLKCTRL_CPU_RSRVD1(v) \ - (((v) << 6) & BM_CLKCTRL_CPU_RSRVD1) #define BP_CLKCTRL_CPU_DIV_CPU 0 #define BM_CLKCTRL_CPU_DIV_CPU 0x0000003F #define BF_CLKCTRL_CPU_DIV_CPU(v) \ @@ -129,10 +93,6 @@ #define HW_CLKCTRL_HBUS_CLR (0x00000038) #define HW_CLKCTRL_HBUS_TOG (0x0000003c) -#define BP_CLKCTRL_HBUS_RSRVD4 30 -#define BM_CLKCTRL_HBUS_RSRVD4 0xC0000000 -#define BF_CLKCTRL_HBUS_RSRVD4(v) \ - (((v) << 30) & BM_CLKCTRL_HBUS_RSRVD4) #define BM_CLKCTRL_HBUS_BUSY 0x20000000 #define BM_CLKCTRL_HBUS_DCP_AS_ENABLE 0x10000000 #define BM_CLKCTRL_HBUS_PXP_AS_ENABLE 0x08000000 @@ -143,7 +103,6 @@ #define BM_CLKCTRL_HBUS_CPU_DATA_AS_ENABLE 0x00400000 #define BM_CLKCTRL_HBUS_CPU_INSTR_AS_ENABLE 0x00200000 #define BM_CLKCTRL_HBUS_AUTO_SLOW_MODE 0x00100000 -#define BM_CLKCTRL_HBUS_RSRVD2 0x00080000 #define BP_CLKCTRL_HBUS_SLOW_DIV 16 #define BM_CLKCTRL_HBUS_SLOW_DIV 0x00070000 #define BF_CLKCTRL_HBUS_SLOW_DIV(v) \ @@ -154,10 +113,6 @@ #define BV_CLKCTRL_HBUS_SLOW_DIV__BY8 0x3 #define BV_CLKCTRL_HBUS_SLOW_DIV__BY16 0x4 #define BV_CLKCTRL_HBUS_SLOW_DIV__BY32 0x5 -#define BP_CLKCTRL_HBUS_RSRVD1 6 -#define BM_CLKCTRL_HBUS_RSRVD1 0x0000FFC0 -#define BF_CLKCTRL_HBUS_RSRVD1(v) \ - (((v) << 6) & BM_CLKCTRL_HBUS_RSRVD1) #define BM_CLKCTRL_HBUS_DIV_FRAC_EN 0x00000020 #define BP_CLKCTRL_HBUS_DIV 0 #define BM_CLKCTRL_HBUS_DIV 0x0000001F @@ -167,10 +122,6 @@ #define HW_CLKCTRL_XBUS (0x00000040) #define BM_CLKCTRL_XBUS_BUSY 0x80000000 -#define BP_CLKCTRL_XBUS_RSRVD1 11 -#define BM_CLKCTRL_XBUS_RSRVD1 0x7FFFF800 -#define BF_CLKCTRL_XBUS_RSRVD1(v) \ - (((v) << 11) & BM_CLKCTRL_XBUS_RSRVD1) #define BM_CLKCTRL_XBUS_DIV_FRAC_EN 0x00000400 #define BP_CLKCTRL_XBUS_DIV 0 #define BM_CLKCTRL_XBUS_DIV 0x000003FF @@ -192,10 +143,6 @@ #define BM_CLKCTRL_XTAL_DIGCTRL_CLK1M_GATE 0x08000000 #define BP_CLKCTRL_XTAL_TIMROT_CLK32K_GATE 26 #define BM_CLKCTRL_XTAL_TIMROT_CLK32K_GATE 0x04000000 -#define BP_CLKCTRL_XTAL_RSRVD1 2 -#define BM_CLKCTRL_XTAL_RSRVD1 0x03FFFFFC -#define BF_CLKCTRL_XTAL_RSRVD1(v) \ - (((v) << 2) & BM_CLKCTRL_XTAL_RSRVD1) #define BP_CLKCTRL_XTAL_DIV_UART 0 #define BM_CLKCTRL_XTAL_DIV_UART 0x00000003 #define BF_CLKCTRL_XTAL_DIV_UART(v) \ @@ -205,12 +152,7 @@ #define BP_CLKCTRL_PIX_CLKGATE 31 #define BM_CLKCTRL_PIX_CLKGATE 0x80000000 -#define BM_CLKCTRL_PIX_RSRVD2 0x40000000 #define BM_CLKCTRL_PIX_BUSY 0x20000000 -#define BP_CLKCTRL_PIX_RSRVD1 13 -#define BM_CLKCTRL_PIX_RSRVD1 0x1FFFE000 -#define BF_CLKCTRL_PIX_RSRVD1(v) \ - (((v) << 13) & BM_CLKCTRL_PIX_RSRVD1) #define BM_CLKCTRL_PIX_DIV_FRAC_EN 0x00001000 #define BP_CLKCTRL_PIX_DIV 0 #define BM_CLKCTRL_PIX_DIV 0x00000FFF @@ -221,12 +163,7 @@ #define BP_CLKCTRL_SSP_CLKGATE 31 #define BM_CLKCTRL_SSP_CLKGATE 0x80000000 -#define BM_CLKCTRL_SSP_RSRVD2 0x40000000 #define BM_CLKCTRL_SSP_BUSY 0x20000000 -#define BP_CLKCTRL_SSP_RSRVD1 10 -#define BM_CLKCTRL_SSP_RSRVD1 0x1FFFFC00 -#define BF_CLKCTRL_SSP_RSRVD1(v) \ - (((v) << 10) & BM_CLKCTRL_SSP_RSRVD1) #define BM_CLKCTRL_SSP_DIV_FRAC_EN 0x00000200 #define BP_CLKCTRL_SSP_DIV 0 #define BM_CLKCTRL_SSP_DIV 0x000001FF @@ -237,12 +174,7 @@ #define BP_CLKCTRL_GPMI_CLKGATE 31 #define BM_CLKCTRL_GPMI_CLKGATE 0x80000000 -#define BM_CLKCTRL_GPMI_RSRVD2 0x40000000 #define BM_CLKCTRL_GPMI_BUSY 0x20000000 -#define BP_CLKCTRL_GPMI_RSRVD1 11 -#define BM_CLKCTRL_GPMI_RSRVD1 0x1FFFF800 -#define BF_CLKCTRL_GPMI_RSRVD1(v) \ - (((v) << 11) & BM_CLKCTRL_GPMI_RSRVD1) #define BM_CLKCTRL_GPMI_DIV_FRAC_EN 0x00000400 #define BP_CLKCTRL_GPMI_DIV 0 #define BM_CLKCTRL_GPMI_DIV 0x000003FF @@ -252,10 +184,6 @@ #define HW_CLKCTRL_SPDIF (0x00000090) #define BM_CLKCTRL_SPDIF_CLKGATE 0x80000000 -#define BP_CLKCTRL_SPDIF_RSRVD 0 -#define BM_CLKCTRL_SPDIF_RSRVD 0x7FFFFFFF -#define BF_CLKCTRL_SPDIF_RSRVD(v) \ - (((v) << 0) & BM_CLKCTRL_SPDIF_RSRVD) #define HW_CLKCTRL_EMI (0x000000a0) @@ -266,24 +194,12 @@ #define BM_CLKCTRL_EMI_BUSY_REF_EMI 0x10000000 #define BM_CLKCTRL_EMI_BUSY_REF_CPU 0x08000000 #define BM_CLKCTRL_EMI_BUSY_SYNC_MODE 0x04000000 -#define BP_CLKCTRL_EMI_RSRVD3 18 -#define BM_CLKCTRL_EMI_RSRVD3 0x03FC0000 -#define BF_CLKCTRL_EMI_RSRVD3(v) \ - (((v) << 18) & BM_CLKCTRL_EMI_RSRVD3) #define BM_CLKCTRL_EMI_BUSY_DCC_RESYNC 0x00020000 #define BM_CLKCTRL_EMI_DCC_RESYNC_ENABLE 0x00010000 -#define BP_CLKCTRL_EMI_RSRVD2 12 -#define BM_CLKCTRL_EMI_RSRVD2 0x0000F000 -#define BF_CLKCTRL_EMI_RSRVD2(v) \ - (((v) << 12) & BM_CLKCTRL_EMI_RSRVD2) #define BP_CLKCTRL_EMI_DIV_XTAL 8 #define BM_CLKCTRL_EMI_DIV_XTAL 0x00000F00 #define BF_CLKCTRL_EMI_DIV_XTAL(v) \ (((v) << 8) & BM_CLKCTRL_EMI_DIV_XTAL) -#define BP_CLKCTRL_EMI_RSRVD1 6 -#define BM_CLKCTRL_EMI_RSRVD1 0x000000C0 -#define BF_CLKCTRL_EMI_RSRVD1(v) \ - (((v) << 6) & BM_CLKCTRL_EMI_RSRVD1) #define BP_CLKCTRL_EMI_DIV_EMI 0 #define BM_CLKCTRL_EMI_DIV_EMI 0x0000003F #define BF_CLKCTRL_EMI_DIV_EMI(v) \ @@ -292,22 +208,13 @@ #define HW_CLKCTRL_IR (0x000000b0) #define BM_CLKCTRL_IR_CLKGATE 0x80000000 -#define BM_CLKCTRL_IR_RSRVD3 0x40000000 #define BM_CLKCTRL_IR_AUTO_DIV 0x20000000 #define BM_CLKCTRL_IR_IR_BUSY 0x10000000 #define BM_CLKCTRL_IR_IROV_BUSY 0x08000000 -#define BP_CLKCTRL_IR_RSRVD2 25 -#define BM_CLKCTRL_IR_RSRVD2 0x06000000 -#define BF_CLKCTRL_IR_RSRVD2(v) \ - (((v) << 25) & BM_CLKCTRL_IR_RSRVD2) #define BP_CLKCTRL_IR_IROV_DIV 16 #define BM_CLKCTRL_IR_IROV_DIV 0x01FF0000 #define BF_CLKCTRL_IR_IROV_DIV(v) \ (((v) << 16) & BM_CLKCTRL_IR_IROV_DIV) -#define BP_CLKCTRL_IR_RSRVD1 10 -#define BM_CLKCTRL_IR_RSRVD1 0x0000FC00 -#define BF_CLKCTRL_IR_RSRVD1(v) \ - (((v) << 10) & BM_CLKCTRL_IR_RSRVD1) #define BP_CLKCTRL_IR_IR_DIV 0 #define BM_CLKCTRL_IR_IR_DIV 0x000003FF #define BF_CLKCTRL_IR_IR_DIV(v) \ @@ -316,12 +223,7 @@ #define HW_CLKCTRL_SAIF (0x000000c0) #define BM_CLKCTRL_SAIF_CLKGATE 0x80000000 -#define BM_CLKCTRL_SAIF_RSRVD2 0x40000000 #define BM_CLKCTRL_SAIF_BUSY 0x20000000 -#define BP_CLKCTRL_SAIF_RSRVD1 17 -#define BM_CLKCTRL_SAIF_RSRVD1 0x1FFE0000 -#define BF_CLKCTRL_SAIF_RSRVD1(v) \ - (((v) << 17) & BM_CLKCTRL_SAIF_RSRVD1) #define BM_CLKCTRL_SAIF_DIV_FRAC_EN 0x00010000 #define BP_CLKCTRL_SAIF_DIV 0 #define BM_CLKCTRL_SAIF_DIV 0x0000FFFF @@ -332,20 +234,11 @@ #define BM_CLKCTRL_TV_CLK_TV108M_GATE 0x80000000 #define BM_CLKCTRL_TV_CLK_TV_GATE 0x40000000 -#define BP_CLKCTRL_TV_RSRVD 0 -#define BM_CLKCTRL_TV_RSRVD 0x3FFFFFFF -#define BF_CLKCTRL_TV_RSRVD(v) \ - (((v) << 0) & BM_CLKCTRL_TV_RSRVD) #define HW_CLKCTRL_ETM (0x000000e0) #define BM_CLKCTRL_ETM_CLKGATE 0x80000000 -#define BM_CLKCTRL_ETM_RSRVD2 0x40000000 #define BM_CLKCTRL_ETM_BUSY 0x20000000 -#define BP_CLKCTRL_ETM_RSRVD1 7 -#define BM_CLKCTRL_ETM_RSRVD1 0x1FFFFF80 -#define BF_CLKCTRL_ETM_RSRVD1(v) \ - (((v) << 7) & BM_CLKCTRL_ETM_RSRVD1) #define BM_CLKCTRL_ETM_DIV_FRAC_EN 0x00000040 #define BP_CLKCTRL_ETM_DIV 0 #define BM_CLKCTRL_ETM_DIV 0x0000003F @@ -393,36 +286,23 @@ #define BM_CLKCTRL_FRAC1_CLKGATEVID 0x80000000 #define BM_CLKCTRL_FRAC1_VID_STABLE 0x40000000 -#define BP_CLKCTRL_FRAC1_RSRVD1 0 -#define BM_CLKCTRL_FRAC1_RSRVD1 0x3FFFFFFF -#define BF_CLKCTRL_FRAC1_RSRVD1(v) \ - (((v) << 0) & BM_CLKCTRL_FRAC1_RSRVD1) #define HW_CLKCTRL_CLKSEQ (0x00000110) #define HW_CLKCTRL_CLKSEQ_SET (0x00000114) #define HW_CLKCTRL_CLKSEQ_CLR (0x00000118) #define HW_CLKCTRL_CLKSEQ_TOG (0x0000011c) -#define BP_CLKCTRL_CLKSEQ_RSRVD1 9 -#define BM_CLKCTRL_CLKSEQ_RSRVD1 0xFFFFFE00 -#define BF_CLKCTRL_CLKSEQ_RSRVD1(v) \ - (((v) << 9) & BM_CLKCTRL_CLKSEQ_RSRVD1) #define BM_CLKCTRL_CLKSEQ_BYPASS_ETM 0x00000100 #define BM_CLKCTRL_CLKSEQ_BYPASS_CPU 0x00000080 #define BM_CLKCTRL_CLKSEQ_BYPASS_EMI 0x00000040 #define BM_CLKCTRL_CLKSEQ_BYPASS_SSP 0x00000020 #define BM_CLKCTRL_CLKSEQ_BYPASS_GPMI 0x00000010 #define BM_CLKCTRL_CLKSEQ_BYPASS_IR 0x00000008 -#define BM_CLKCTRL_CLKSEQ_RSRVD0 0x00000004 #define BM_CLKCTRL_CLKSEQ_BYPASS_PIX 0x00000002 #define BM_CLKCTRL_CLKSEQ_BYPASS_SAIF 0x00000001 #define HW_CLKCTRL_RESET (0x00000120) -#define BP_CLKCTRL_RESET_RSRVD 2 -#define BM_CLKCTRL_RESET_RSRVD 0xFFFFFFFC -#define BF_CLKCTRL_RESET_RSRVD(v) \ - (((v) << 2) & BM_CLKCTRL_RESET_RSRVD) #define BM_CLKCTRL_RESET_CHIP 0x00000002 #define BM_CLKCTRL_RESET_DIG 0x00000001 @@ -432,10 +312,6 @@ #define BM_CLKCTRL_STATUS_CPU_LIMIT 0xC0000000 #define BF_CLKCTRL_STATUS_CPU_LIMIT(v) \ (((v) << 30) & BM_CLKCTRL_STATUS_CPU_LIMIT) -#define BP_CLKCTRL_STATUS_RSRVD 0 -#define BM_CLKCTRL_STATUS_RSRVD 0x3FFFFFFF -#define BF_CLKCTRL_STATUS_RSRVD(v) \ - (((v) << 0) & BM_CLKCTRL_STATUS_RSRVD) #define HW_CLKCTRL_VERSION (0x00000140) -- cgit v1.2.3-18-g5258 From 44b4ca32fe09ae3844e9e2d12fb7371b3edeee14 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Thu, 27 Jan 2011 12:38:01 +0100 Subject: ARM i.MX28: remove reserved register defines Signed-off-by: Sascha Hauer Acked-by: Shawn Guo Acked-by: Wolfram Sang --- arch/arm/mach-mxs/regs-clkctrl-mx28.h | 177 ---------------------------------- 1 file changed, 177 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mxs/regs-clkctrl-mx28.h b/arch/arm/mach-mxs/regs-clkctrl-mx28.h index 661df18755f..7d1b061d794 100644 --- a/arch/arm/mach-mxs/regs-clkctrl-mx28.h +++ b/arch/arm/mach-mxs/regs-clkctrl-mx28.h @@ -31,10 +31,6 @@ #define HW_CLKCTRL_PLL0CTRL0_CLR (0x00000008) #define HW_CLKCTRL_PLL0CTRL0_TOG (0x0000000c) -#define BP_CLKCTRL_PLL0CTRL0_RSRVD6 30 -#define BM_CLKCTRL_PLL0CTRL0_RSRVD6 0xC0000000 -#define BF_CLKCTRL_PLL0CTRL0_RSRVD6(v) \ - (((v) << 30) & BM_CLKCTRL_PLL0CTRL0_RSRVD6) #define BP_CLKCTRL_PLL0CTRL0_LFR_SEL 28 #define BM_CLKCTRL_PLL0CTRL0_LFR_SEL 0x30000000 #define BF_CLKCTRL_PLL0CTRL0_LFR_SEL(v) \ @@ -43,10 +39,6 @@ #define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__TIMES_2 0x1 #define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__TIMES_05 0x2 #define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__UNDEFINED 0x3 -#define BP_CLKCTRL_PLL0CTRL0_RSRVD5 26 -#define BM_CLKCTRL_PLL0CTRL0_RSRVD5 0x0C000000 -#define BF_CLKCTRL_PLL0CTRL0_RSRVD5(v) \ - (((v) << 26) & BM_CLKCTRL_PLL0CTRL0_RSRVD5) #define BP_CLKCTRL_PLL0CTRL0_CP_SEL 24 #define BM_CLKCTRL_PLL0CTRL0_CP_SEL 0x03000000 #define BF_CLKCTRL_PLL0CTRL0_CP_SEL(v) \ @@ -55,10 +47,6 @@ #define BV_CLKCTRL_PLL0CTRL0_CP_SEL__TIMES_2 0x1 #define BV_CLKCTRL_PLL0CTRL0_CP_SEL__TIMES_05 0x2 #define BV_CLKCTRL_PLL0CTRL0_CP_SEL__UNDEFINED 0x3 -#define BP_CLKCTRL_PLL0CTRL0_RSRVD4 22 -#define BM_CLKCTRL_PLL0CTRL0_RSRVD4 0x00C00000 -#define BF_CLKCTRL_PLL0CTRL0_RSRVD4(v) \ - (((v) << 22) & BM_CLKCTRL_PLL0CTRL0_RSRVD4) #define BP_CLKCTRL_PLL0CTRL0_DIV_SEL 20 #define BM_CLKCTRL_PLL0CTRL0_DIV_SEL 0x00300000 #define BF_CLKCTRL_PLL0CTRL0_DIV_SEL(v) \ @@ -67,22 +55,13 @@ #define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__LOWER 0x1 #define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__LOWEST 0x2 #define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__UNDEFINED 0x3 -#define BM_CLKCTRL_PLL0CTRL0_RSRVD3 0x00080000 #define BM_CLKCTRL_PLL0CTRL0_EN_USB_CLKS 0x00040000 #define BM_CLKCTRL_PLL0CTRL0_POWER 0x00020000 -#define BP_CLKCTRL_PLL0CTRL0_RSRVD1 0 -#define BM_CLKCTRL_PLL0CTRL0_RSRVD1 0x0001FFFF -#define BF_CLKCTRL_PLL0CTRL0_RSRVD1(v) \ - (((v) << 0) & BM_CLKCTRL_PLL0CTRL0_RSRVD1) #define HW_CLKCTRL_PLL0CTRL1 (0x00000010) #define BM_CLKCTRL_PLL0CTRL1_LOCK 0x80000000 #define BM_CLKCTRL_PLL0CTRL1_FORCE_LOCK 0x40000000 -#define BP_CLKCTRL_PLL0CTRL1_RSRVD1 16 -#define BM_CLKCTRL_PLL0CTRL1_RSRVD1 0x3FFF0000 -#define BF_CLKCTRL_PLL0CTRL1_RSRVD1(v) \ - (((v) << 16) & BM_CLKCTRL_PLL0CTRL1_RSRVD1) #define BP_CLKCTRL_PLL0CTRL1_LOCK_COUNT 0 #define BM_CLKCTRL_PLL0CTRL1_LOCK_COUNT 0x0000FFFF #define BF_CLKCTRL_PLL0CTRL1_LOCK_COUNT(v) \ @@ -94,7 +73,6 @@ #define HW_CLKCTRL_PLL1CTRL0_TOG (0x0000002c) #define BM_CLKCTRL_PLL1CTRL0_CLKGATEEMI 0x80000000 -#define BM_CLKCTRL_PLL1CTRL0_RSRVD6 0x40000000 #define BP_CLKCTRL_PLL1CTRL0_LFR_SEL 28 #define BM_CLKCTRL_PLL1CTRL0_LFR_SEL 0x30000000 #define BF_CLKCTRL_PLL1CTRL0_LFR_SEL(v) \ @@ -103,10 +81,6 @@ #define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__TIMES_2 0x1 #define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__TIMES_05 0x2 #define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__UNDEFINED 0x3 -#define BP_CLKCTRL_PLL1CTRL0_RSRVD5 26 -#define BM_CLKCTRL_PLL1CTRL0_RSRVD5 0x0C000000 -#define BF_CLKCTRL_PLL1CTRL0_RSRVD5(v) \ - (((v) << 26) & BM_CLKCTRL_PLL1CTRL0_RSRVD5) #define BP_CLKCTRL_PLL1CTRL0_CP_SEL 24 #define BM_CLKCTRL_PLL1CTRL0_CP_SEL 0x03000000 #define BF_CLKCTRL_PLL1CTRL0_CP_SEL(v) \ @@ -115,10 +89,6 @@ #define BV_CLKCTRL_PLL1CTRL0_CP_SEL__TIMES_2 0x1 #define BV_CLKCTRL_PLL1CTRL0_CP_SEL__TIMES_05 0x2 #define BV_CLKCTRL_PLL1CTRL0_CP_SEL__UNDEFINED 0x3 -#define BP_CLKCTRL_PLL1CTRL0_RSRVD4 22 -#define BM_CLKCTRL_PLL1CTRL0_RSRVD4 0x00C00000 -#define BF_CLKCTRL_PLL1CTRL0_RSRVD4(v) \ - (((v) << 22) & BM_CLKCTRL_PLL1CTRL0_RSRVD4) #define BP_CLKCTRL_PLL1CTRL0_DIV_SEL 20 #define BM_CLKCTRL_PLL1CTRL0_DIV_SEL 0x00300000 #define BF_CLKCTRL_PLL1CTRL0_DIV_SEL(v) \ @@ -127,22 +97,13 @@ #define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__LOWER 0x1 #define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__LOWEST 0x2 #define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__UNDEFINED 0x3 -#define BM_CLKCTRL_PLL1CTRL0_RSRVD3 0x00080000 #define BM_CLKCTRL_PLL1CTRL0_EN_USB_CLKS 0x00040000 #define BM_CLKCTRL_PLL1CTRL0_POWER 0x00020000 -#define BP_CLKCTRL_PLL1CTRL0_RSRVD1 0 -#define BM_CLKCTRL_PLL1CTRL0_RSRVD1 0x0001FFFF -#define BF_CLKCTRL_PLL1CTRL0_RSRVD1(v) \ - (((v) << 0) & BM_CLKCTRL_PLL1CTRL0_RSRVD1) #define HW_CLKCTRL_PLL1CTRL1 (0x00000030) #define BM_CLKCTRL_PLL1CTRL1_LOCK 0x80000000 #define BM_CLKCTRL_PLL1CTRL1_FORCE_LOCK 0x40000000 -#define BP_CLKCTRL_PLL1CTRL1_RSRVD1 16 -#define BM_CLKCTRL_PLL1CTRL1_RSRVD1 0x3FFF0000 -#define BF_CLKCTRL_PLL1CTRL1_RSRVD1(v) \ - (((v) << 16) & BM_CLKCTRL_PLL1CTRL1_RSRVD1) #define BP_CLKCTRL_PLL1CTRL1_LOCK_COUNT 0 #define BM_CLKCTRL_PLL1CTRL1_LOCK_COUNT 0x0000FFFF #define BF_CLKCTRL_PLL1CTRL1_LOCK_COUNT(v) \ @@ -154,51 +115,31 @@ #define HW_CLKCTRL_PLL2CTRL0_TOG (0x0000004c) #define BM_CLKCTRL_PLL2CTRL0_CLKGATE 0x80000000 -#define BM_CLKCTRL_PLL2CTRL0_RSRVD3 0x40000000 #define BP_CLKCTRL_PLL2CTRL0_LFR_SEL 28 #define BM_CLKCTRL_PLL2CTRL0_LFR_SEL 0x30000000 #define BF_CLKCTRL_PLL2CTRL0_LFR_SEL(v) \ (((v) << 28) & BM_CLKCTRL_PLL2CTRL0_LFR_SEL) -#define BM_CLKCTRL_PLL2CTRL0_RSRVD2 0x08000000 #define BM_CLKCTRL_PLL2CTRL0_HOLD_RING_OFF_B 0x04000000 #define BP_CLKCTRL_PLL2CTRL0_CP_SEL 24 #define BM_CLKCTRL_PLL2CTRL0_CP_SEL 0x03000000 #define BF_CLKCTRL_PLL2CTRL0_CP_SEL(v) \ (((v) << 24) & BM_CLKCTRL_PLL2CTRL0_CP_SEL) #define BM_CLKCTRL_PLL2CTRL0_POWER 0x00800000 -#define BP_CLKCTRL_PLL2CTRL0_RSRVD1 0 -#define BM_CLKCTRL_PLL2CTRL0_RSRVD1 0x007FFFFF -#define BF_CLKCTRL_PLL2CTRL0_RSRVD1(v) \ - (((v) << 0) & BM_CLKCTRL_PLL2CTRL0_RSRVD1) #define HW_CLKCTRL_CPU (0x00000050) #define HW_CLKCTRL_CPU_SET (0x00000054) #define HW_CLKCTRL_CPU_CLR (0x00000058) #define HW_CLKCTRL_CPU_TOG (0x0000005c) -#define BP_CLKCTRL_CPU_RSRVD5 30 -#define BM_CLKCTRL_CPU_RSRVD5 0xC0000000 -#define BF_CLKCTRL_CPU_RSRVD5(v) \ - (((v) << 30) & BM_CLKCTRL_CPU_RSRVD5) #define BM_CLKCTRL_CPU_BUSY_REF_XTAL 0x20000000 #define BM_CLKCTRL_CPU_BUSY_REF_CPU 0x10000000 -#define BM_CLKCTRL_CPU_RSRVD4 0x08000000 #define BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN 0x04000000 #define BP_CLKCTRL_CPU_DIV_XTAL 16 #define BM_CLKCTRL_CPU_DIV_XTAL 0x03FF0000 #define BF_CLKCTRL_CPU_DIV_XTAL(v) \ (((v) << 16) & BM_CLKCTRL_CPU_DIV_XTAL) -#define BP_CLKCTRL_CPU_RSRVD3 13 -#define BM_CLKCTRL_CPU_RSRVD3 0x0000E000 -#define BF_CLKCTRL_CPU_RSRVD3(v) \ - (((v) << 13) & BM_CLKCTRL_CPU_RSRVD3) #define BM_CLKCTRL_CPU_INTERRUPT_WAIT 0x00001000 -#define BM_CLKCTRL_CPU_RSRVD2 0x00000800 #define BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN 0x00000400 -#define BP_CLKCTRL_CPU_RSRVD1 6 -#define BM_CLKCTRL_CPU_RSRVD1 0x000003C0 -#define BF_CLKCTRL_CPU_RSRVD1(v) \ - (((v) << 6) & BM_CLKCTRL_CPU_RSRVD1) #define BP_CLKCTRL_CPU_DIV_CPU 0 #define BM_CLKCTRL_CPU_DIV_CPU 0x0000003F #define BF_CLKCTRL_CPU_DIV_CPU(v) \ @@ -212,7 +153,6 @@ #define BM_CLKCTRL_HBUS_ASM_BUSY 0x80000000 #define BM_CLKCTRL_HBUS_DCP_AS_ENABLE 0x40000000 #define BM_CLKCTRL_HBUS_PXP_AS_ENABLE 0x20000000 -#define BM_CLKCTRL_HBUS_RSRVD2 0x10000000 #define BM_CLKCTRL_HBUS_ASM_EMIPORT_AS_ENABLE 0x08000000 #define BM_CLKCTRL_HBUS_APBHDMA_AS_ENABLE 0x04000000 #define BM_CLKCTRL_HBUS_APBXDMA_AS_ENABLE 0x02000000 @@ -232,10 +172,6 @@ #define BV_CLKCTRL_HBUS_SLOW_DIV__BY8 0x3 #define BV_CLKCTRL_HBUS_SLOW_DIV__BY16 0x4 #define BV_CLKCTRL_HBUS_SLOW_DIV__BY32 0x5 -#define BP_CLKCTRL_HBUS_RSRVD1 6 -#define BM_CLKCTRL_HBUS_RSRVD1 0x0000FFC0 -#define BF_CLKCTRL_HBUS_RSRVD1(v) \ - (((v) << 6) & BM_CLKCTRL_HBUS_RSRVD1) #define BM_CLKCTRL_HBUS_DIV_FRAC_EN 0x00000020 #define BP_CLKCTRL_HBUS_DIV 0 #define BM_CLKCTRL_HBUS_DIV 0x0000001F @@ -245,10 +181,6 @@ #define HW_CLKCTRL_XBUS (0x00000070) #define BM_CLKCTRL_XBUS_BUSY 0x80000000 -#define BP_CLKCTRL_XBUS_RSRVD1 12 -#define BM_CLKCTRL_XBUS_RSRVD1 0x7FFFF000 -#define BF_CLKCTRL_XBUS_RSRVD1(v) \ - (((v) << 12) & BM_CLKCTRL_XBUS_RSRVD1) #define BM_CLKCTRL_XBUS_AUTO_CLEAR_DIV_ENABLE 0x00000800 #define BM_CLKCTRL_XBUS_DIV_FRAC_EN 0x00000400 #define BP_CLKCTRL_XBUS_DIV 0 @@ -263,19 +195,10 @@ #define BP_CLKCTRL_XTAL_UART_CLK_GATE 31 #define BM_CLKCTRL_XTAL_UART_CLK_GATE 0x80000000 -#define BM_CLKCTRL_XTAL_RSRVD3 0x40000000 #define BP_CLKCTRL_XTAL_PWM_CLK24M_GATE 29 #define BM_CLKCTRL_XTAL_PWM_CLK24M_GATE 0x20000000 -#define BP_CLKCTRL_XTAL_RSRVD2 27 -#define BM_CLKCTRL_XTAL_RSRVD2 0x18000000 -#define BF_CLKCTRL_XTAL_RSRVD2(v) \ - (((v) << 27) & BM_CLKCTRL_XTAL_RSRVD2) #define BP_CLKCTRL_XTAL_TIMROT_CLK32K_GATE 26 #define BM_CLKCTRL_XTAL_TIMROT_CLK32K_GATE 0x04000000 -#define BP_CLKCTRL_XTAL_RSRVD1 2 -#define BM_CLKCTRL_XTAL_RSRVD1 0x03FFFFFC -#define BF_CLKCTRL_XTAL_RSRVD1(v) \ - (((v) << 2) & BM_CLKCTRL_XTAL_RSRVD1) #define BP_CLKCTRL_XTAL_DIV_UART 0 #define BM_CLKCTRL_XTAL_DIV_UART 0x00000003 #define BF_CLKCTRL_XTAL_DIV_UART(v) \ @@ -285,12 +208,7 @@ #define BP_CLKCTRL_SSP0_CLKGATE 31 #define BM_CLKCTRL_SSP0_CLKGATE 0x80000000 -#define BM_CLKCTRL_SSP0_RSRVD2 0x40000000 #define BM_CLKCTRL_SSP0_BUSY 0x20000000 -#define BP_CLKCTRL_SSP0_RSRVD1 10 -#define BM_CLKCTRL_SSP0_RSRVD1 0x1FFFFC00 -#define BF_CLKCTRL_SSP0_RSRVD1(v) \ - (((v) << 10) & BM_CLKCTRL_SSP0_RSRVD1) #define BM_CLKCTRL_SSP0_DIV_FRAC_EN 0x00000200 #define BP_CLKCTRL_SSP0_DIV 0 #define BM_CLKCTRL_SSP0_DIV 0x000001FF @@ -301,12 +219,7 @@ #define BP_CLKCTRL_SSP1_CLKGATE 31 #define BM_CLKCTRL_SSP1_CLKGATE 0x80000000 -#define BM_CLKCTRL_SSP1_RSRVD2 0x40000000 #define BM_CLKCTRL_SSP1_BUSY 0x20000000 -#define BP_CLKCTRL_SSP1_RSRVD1 10 -#define BM_CLKCTRL_SSP1_RSRVD1 0x1FFFFC00 -#define BF_CLKCTRL_SSP1_RSRVD1(v) \ - (((v) << 10) & BM_CLKCTRL_SSP1_RSRVD1) #define BM_CLKCTRL_SSP1_DIV_FRAC_EN 0x00000200 #define BP_CLKCTRL_SSP1_DIV 0 #define BM_CLKCTRL_SSP1_DIV 0x000001FF @@ -317,12 +230,7 @@ #define BP_CLKCTRL_SSP2_CLKGATE 31 #define BM_CLKCTRL_SSP2_CLKGATE 0x80000000 -#define BM_CLKCTRL_SSP2_RSRVD2 0x40000000 #define BM_CLKCTRL_SSP2_BUSY 0x20000000 -#define BP_CLKCTRL_SSP2_RSRVD1 10 -#define BM_CLKCTRL_SSP2_RSRVD1 0x1FFFFC00 -#define BF_CLKCTRL_SSP2_RSRVD1(v) \ - (((v) << 10) & BM_CLKCTRL_SSP2_RSRVD1) #define BM_CLKCTRL_SSP2_DIV_FRAC_EN 0x00000200 #define BP_CLKCTRL_SSP2_DIV 0 #define BM_CLKCTRL_SSP2_DIV 0x000001FF @@ -333,12 +241,7 @@ #define BP_CLKCTRL_SSP3_CLKGATE 31 #define BM_CLKCTRL_SSP3_CLKGATE 0x80000000 -#define BM_CLKCTRL_SSP3_RSRVD2 0x40000000 #define BM_CLKCTRL_SSP3_BUSY 0x20000000 -#define BP_CLKCTRL_SSP3_RSRVD1 10 -#define BM_CLKCTRL_SSP3_RSRVD1 0x1FFFFC00 -#define BF_CLKCTRL_SSP3_RSRVD1(v) \ - (((v) << 10) & BM_CLKCTRL_SSP3_RSRVD1) #define BM_CLKCTRL_SSP3_DIV_FRAC_EN 0x00000200 #define BP_CLKCTRL_SSP3_DIV 0 #define BM_CLKCTRL_SSP3_DIV 0x000001FF @@ -349,12 +252,7 @@ #define BP_CLKCTRL_GPMI_CLKGATE 31 #define BM_CLKCTRL_GPMI_CLKGATE 0x80000000 -#define BM_CLKCTRL_GPMI_RSRVD2 0x40000000 #define BM_CLKCTRL_GPMI_BUSY 0x20000000 -#define BP_CLKCTRL_GPMI_RSRVD1 11 -#define BM_CLKCTRL_GPMI_RSRVD1 0x1FFFF800 -#define BF_CLKCTRL_GPMI_RSRVD1(v) \ - (((v) << 11) & BM_CLKCTRL_GPMI_RSRVD1) #define BM_CLKCTRL_GPMI_DIV_FRAC_EN 0x00000400 #define BP_CLKCTRL_GPMI_DIV 0 #define BM_CLKCTRL_GPMI_DIV 0x000003FF @@ -365,10 +263,6 @@ #define BP_CLKCTRL_SPDIF_CLKGATE 31 #define BM_CLKCTRL_SPDIF_CLKGATE 0x80000000 -#define BP_CLKCTRL_SPDIF_RSRVD 0 -#define BM_CLKCTRL_SPDIF_RSRVD 0x7FFFFFFF -#define BF_CLKCTRL_SPDIF_RSRVD(v) \ - (((v) << 0) & BM_CLKCTRL_SPDIF_RSRVD) #define HW_CLKCTRL_EMI (0x000000f0) @@ -379,24 +273,12 @@ #define BM_CLKCTRL_EMI_BUSY_REF_EMI 0x10000000 #define BM_CLKCTRL_EMI_BUSY_REF_CPU 0x08000000 #define BM_CLKCTRL_EMI_BUSY_SYNC_MODE 0x04000000 -#define BP_CLKCTRL_EMI_RSRVD3 18 -#define BM_CLKCTRL_EMI_RSRVD3 0x03FC0000 -#define BF_CLKCTRL_EMI_RSRVD3(v) \ - (((v) << 18) & BM_CLKCTRL_EMI_RSRVD3) #define BM_CLKCTRL_EMI_BUSY_DCC_RESYNC 0x00020000 #define BM_CLKCTRL_EMI_DCC_RESYNC_ENABLE 0x00010000 -#define BP_CLKCTRL_EMI_RSRVD2 12 -#define BM_CLKCTRL_EMI_RSRVD2 0x0000F000 -#define BF_CLKCTRL_EMI_RSRVD2(v) \ - (((v) << 12) & BM_CLKCTRL_EMI_RSRVD2) #define BP_CLKCTRL_EMI_DIV_XTAL 8 #define BM_CLKCTRL_EMI_DIV_XTAL 0x00000F00 #define BF_CLKCTRL_EMI_DIV_XTAL(v) \ (((v) << 8) & BM_CLKCTRL_EMI_DIV_XTAL) -#define BP_CLKCTRL_EMI_RSRVD1 6 -#define BM_CLKCTRL_EMI_RSRVD1 0x000000C0 -#define BF_CLKCTRL_EMI_RSRVD1(v) \ - (((v) << 6) & BM_CLKCTRL_EMI_RSRVD1) #define BP_CLKCTRL_EMI_DIV_EMI 0 #define BM_CLKCTRL_EMI_DIV_EMI 0x0000003F #define BF_CLKCTRL_EMI_DIV_EMI(v) \ @@ -406,12 +288,7 @@ #define BP_CLKCTRL_SAIF0_CLKGATE 31 #define BM_CLKCTRL_SAIF0_CLKGATE 0x80000000 -#define BM_CLKCTRL_SAIF0_RSRVD2 0x40000000 #define BM_CLKCTRL_SAIF0_BUSY 0x20000000 -#define BP_CLKCTRL_SAIF0_RSRVD1 17 -#define BM_CLKCTRL_SAIF0_RSRVD1 0x1FFE0000 -#define BF_CLKCTRL_SAIF0_RSRVD1(v) \ - (((v) << 17) & BM_CLKCTRL_SAIF0_RSRVD1) #define BM_CLKCTRL_SAIF0_DIV_FRAC_EN 0x00010000 #define BP_CLKCTRL_SAIF0_DIV 0 #define BM_CLKCTRL_SAIF0_DIV 0x0000FFFF @@ -422,12 +299,7 @@ #define BP_CLKCTRL_SAIF1_CLKGATE 31 #define BM_CLKCTRL_SAIF1_CLKGATE 0x80000000 -#define BM_CLKCTRL_SAIF1_RSRVD2 0x40000000 #define BM_CLKCTRL_SAIF1_BUSY 0x20000000 -#define BP_CLKCTRL_SAIF1_RSRVD1 17 -#define BM_CLKCTRL_SAIF1_RSRVD1 0x1FFE0000 -#define BF_CLKCTRL_SAIF1_RSRVD1(v) \ - (((v) << 17) & BM_CLKCTRL_SAIF1_RSRVD1) #define BM_CLKCTRL_SAIF1_DIV_FRAC_EN 0x00010000 #define BP_CLKCTRL_SAIF1_DIV 0 #define BM_CLKCTRL_SAIF1_DIV 0x0000FFFF @@ -438,12 +310,7 @@ #define BP_CLKCTRL_DIS_LCDIF_CLKGATE 31 #define BM_CLKCTRL_DIS_LCDIF_CLKGATE 0x80000000 -#define BM_CLKCTRL_DIS_LCDIF_RSRVD2 0x40000000 #define BM_CLKCTRL_DIS_LCDIF_BUSY 0x20000000 -#define BP_CLKCTRL_DIS_LCDIF_RSRVD1 14 -#define BM_CLKCTRL_DIS_LCDIF_RSRVD1 0x1FFFC000 -#define BF_CLKCTRL_DIS_LCDIF_RSRVD1(v) \ - (((v) << 14) & BM_CLKCTRL_DIS_LCDIF_RSRVD1) #define BM_CLKCTRL_DIS_LCDIF_DIV_FRAC_EN 0x00002000 #define BP_CLKCTRL_DIS_LCDIF_DIV 0 #define BM_CLKCTRL_DIS_LCDIF_DIV 0x00001FFF @@ -453,12 +320,7 @@ #define HW_CLKCTRL_ETM (0x00000130) #define BM_CLKCTRL_ETM_CLKGATE 0x80000000 -#define BM_CLKCTRL_ETM_RSRVD2 0x40000000 #define BM_CLKCTRL_ETM_BUSY 0x20000000 -#define BP_CLKCTRL_ETM_RSRVD1 8 -#define BM_CLKCTRL_ETM_RSRVD1 0x1FFFFF00 -#define BF_CLKCTRL_ETM_RSRVD1(v) \ - (((v) << 8) & BM_CLKCTRL_ETM_RSRVD1) #define BM_CLKCTRL_ETM_DIV_FRAC_EN 0x00000080 #define BP_CLKCTRL_ETM_DIV 0 #define BM_CLKCTRL_ETM_DIV 0x0000007F @@ -471,7 +333,6 @@ #define BP_CLKCTRL_ENET_DISABLE 30 #define BM_CLKCTRL_ENET_DISABLE 0x40000000 #define BM_CLKCTRL_ENET_STATUS 0x20000000 -#define BM_CLKCTRL_ENET_RSRVD1 0x10000000 #define BM_CLKCTRL_ENET_BUSY_TIME 0x08000000 #define BP_CLKCTRL_ENET_DIV_TIME 21 #define BM_CLKCTRL_ENET_DIV_TIME 0x07E00000 @@ -493,37 +354,23 @@ #define BM_CLKCTRL_ENET_CLK_OUT_EN 0x00040000 #define BM_CLKCTRL_ENET_RESET_BY_SW_CHIP 0x00020000 #define BM_CLKCTRL_ENET_RESET_BY_SW 0x00010000 -#define BP_CLKCTRL_ENET_RSRVD0 0 -#define BM_CLKCTRL_ENET_RSRVD0 0x0000FFFF -#define BF_CLKCTRL_ENET_RSRVD0(v) \ - (((v) << 0) & BM_CLKCTRL_ENET_RSRVD0) #define HW_CLKCTRL_HSADC (0x00000150) -#define BM_CLKCTRL_HSADC_RSRVD2 0x80000000 #define BM_CLKCTRL_HSADC_RESETB 0x40000000 #define BP_CLKCTRL_HSADC_FREQDIV 28 #define BM_CLKCTRL_HSADC_FREQDIV 0x30000000 #define BF_CLKCTRL_HSADC_FREQDIV(v) \ (((v) << 28) & BM_CLKCTRL_HSADC_FREQDIV) -#define BP_CLKCTRL_HSADC_RSRVD1 0 -#define BM_CLKCTRL_HSADC_RSRVD1 0x0FFFFFFF -#define BF_CLKCTRL_HSADC_RSRVD1(v) \ - (((v) << 0) & BM_CLKCTRL_HSADC_RSRVD1) #define HW_CLKCTRL_FLEXCAN (0x00000160) -#define BM_CLKCTRL_FLEXCAN_RSRVD2 0x80000000 #define BP_CLKCTRL_FLEXCAN_STOP_CAN0 30 #define BM_CLKCTRL_FLEXCAN_STOP_CAN0 0x40000000 #define BM_CLKCTRL_FLEXCAN_CAN0_STATUS 0x20000000 #define BP_CLKCTRL_FLEXCAN_STOP_CAN1 28 #define BM_CLKCTRL_FLEXCAN_STOP_CAN1 0x10000000 #define BM_CLKCTRL_FLEXCAN_CAN1_STATUS 0x08000000 -#define BP_CLKCTRL_FLEXCAN_RSRVD1 0 -#define BM_CLKCTRL_FLEXCAN_RSRVD1 0x07FFFFFF -#define BF_CLKCTRL_FLEXCAN_RSRVD1(v) \ - (((v) << 0) & BM_CLKCTRL_FLEXCAN_RSRVD1) #define HW_CLKCTRL_FRAC0 (0x000001b0) #define HW_CLKCTRL_FRAC0_SET (0x000001b4) @@ -564,10 +411,6 @@ #define HW_CLKCTRL_FRAC1_CLR (0x000001c8) #define HW_CLKCTRL_FRAC1_TOG (0x000001cc) -#define BP_CLKCTRL_FRAC1_RSRVD2 24 -#define BM_CLKCTRL_FRAC1_RSRVD2 0xFF000000 -#define BF_CLKCTRL_FRAC1_RSRVD2(v) \ - (((v) << 24) & BM_CLKCTRL_FRAC1_RSRVD2) #define BP_CLKCTRL_FRAC1_CLKGATEGPMI 23 #define BM_CLKCTRL_FRAC1_CLKGATEGPMI 0x00800000 #define BM_CLKCTRL_FRAC1_GPMI_STABLE 0x00400000 @@ -595,22 +438,10 @@ #define HW_CLKCTRL_CLKSEQ_CLR (0x000001d8) #define HW_CLKCTRL_CLKSEQ_TOG (0x000001dc) -#define BP_CLKCTRL_CLKSEQ_RSRVD0 19 -#define BM_CLKCTRL_CLKSEQ_RSRVD0 0xFFF80000 -#define BF_CLKCTRL_CLKSEQ_RSRVD0(v) \ - (((v) << 19) & BM_CLKCTRL_CLKSEQ_RSRVD0) #define BM_CLKCTRL_CLKSEQ_BYPASS_CPU 0x00040000 -#define BP_CLKCTRL_CLKSEQ_RSRVD1 15 -#define BM_CLKCTRL_CLKSEQ_RSRVD1 0x00038000 -#define BF_CLKCTRL_CLKSEQ_RSRVD1(v) \ - (((v) << 15) & BM_CLKCTRL_CLKSEQ_RSRVD1) #define BM_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF 0x00004000 #define BV_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF__BYPASS 0x1 #define BV_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF__PFD 0x0 -#define BP_CLKCTRL_CLKSEQ_RSRVD2 9 -#define BM_CLKCTRL_CLKSEQ_RSRVD2 0x00003E00 -#define BF_CLKCTRL_CLKSEQ_RSRVD2(v) \ - (((v) << 9) & BM_CLKCTRL_CLKSEQ_RSRVD2) #define BM_CLKCTRL_CLKSEQ_BYPASS_ETM 0x00000100 #define BM_CLKCTRL_CLKSEQ_BYPASS_EMI 0x00000080 #define BM_CLKCTRL_CLKSEQ_BYPASS_SSP3 0x00000040 @@ -623,10 +454,6 @@ #define HW_CLKCTRL_RESET (0x000001e0) -#define BP_CLKCTRL_RESET_RSRVD 6 -#define BM_CLKCTRL_RESET_RSRVD 0xFFFFFFC0 -#define BF_CLKCTRL_RESET_RSRVD(v) \ - (((v) << 6) & BM_CLKCTRL_RESET_RSRVD) #define BM_CLKCTRL_RESET_WDOG_POR_DISABLE 0x00000020 #define BM_CLKCTRL_RESET_EXTERNAL_RESET_ENABLE 0x00000010 #define BM_CLKCTRL_RESET_THERMAL_RESET_ENABLE 0x00000008 @@ -640,10 +467,6 @@ #define BM_CLKCTRL_STATUS_CPU_LIMIT 0xC0000000 #define BF_CLKCTRL_STATUS_CPU_LIMIT(v) \ (((v) << 30) & BM_CLKCTRL_STATUS_CPU_LIMIT) -#define BP_CLKCTRL_STATUS_RSRVD 0 -#define BM_CLKCTRL_STATUS_RSRVD 0x3FFFFFFF -#define BF_CLKCTRL_STATUS_RSRVD(v) \ - (((v) << 0) & BM_CLKCTRL_STATUS_RSRVD) #define HW_CLKCTRL_VERSION (0x00000200) -- cgit v1.2.3-18-g5258 From 4404117d745f2251c5d3c739c50f617e755dbe12 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 27 Jan 2011 15:00:19 -0200 Subject: ARM: mach-mx3/mach-mx31_3ds: Remove unnecessary function for IO mapping Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/mach-mx31_3ds.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c index 0d65db885be..2f414300480 100644 --- a/arch/arm/mach-mx3/mach-mx31_3ds.c +++ b/arch/arm/mach-mx3/mach-mx31_3ds.c @@ -320,14 +320,6 @@ static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; -/* - * Set up static virtual mappings. - */ -static void __init mx31_3ds_map_io(void) -{ - mx31_map_io(); -} - /*! * Board specific initialization. */ @@ -382,7 +374,7 @@ static struct sys_timer mx31_3ds_timer = { MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)") /* Maintainer: Freescale Semiconductor, Inc. */ .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = mx31_3ds_map_io, + .map_io = mx31_map_io, .init_irq = mx31_init_irq, .init_machine = mxc_board_init, .timer = &mx31_3ds_timer, -- cgit v1.2.3-18-g5258 From 026a2078791b64aede220b1b1a3e4dfe4ab175e7 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Wed, 26 Jan 2011 13:41:05 +0100 Subject: microblaze: Fix DTB passing from bootloader Little endian system needs to check OF_DT_HEADER but it is swapped because it is in big-endian. Microblaze LE provides lwr instruction which loads magic number in BIG endian format which can be compared. There is used the fact that if you write 0x1 as word and load it as byte then you get for big-endian zero and 1 for little-endian. Signed-off-by: Michal Simek --- arch/microblaze/kernel/head.S | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S index 42434008209..0db20b5abb5 100644 --- a/arch/microblaze/kernel/head.S +++ b/arch/microblaze/kernel/head.S @@ -77,8 +77,18 @@ real_start: We ensure r7 points to a valid FDT, just in case the bootloader is broken or non-existent */ beqi r7, no_fdt_arg /* NULL pointer? don't copy */ - lw r11, r0, r7 /* Does r7 point to a */ - rsubi r11, r11, OF_DT_HEADER /* valid FDT? */ +/* Does r7 point to a valid FDT? Load HEADER magic number */ + /* Run time Big/Little endian platform */ + /* Save 1 as word and load byte - 0 - BIG, 1 - LITTLE */ + addik r11, r0, 0x1 /* BIG/LITTLE checking value */ + /* __bss_start will be zeroed later - it is just temp location */ + swi r11, r0, TOPHYS(__bss_start) + lbui r11, r0, TOPHYS(__bss_start) + beqid r11, big_endian /* DO NOT break delay stop dependency */ + lw r11, r0, r7 /* Big endian load in delay slot */ + lwr r11, r0, r7 /* Little endian load */ +big_endian: + rsubi r11, r11, OF_DT_HEADER /* Check FDT header */ beqi r11, _prepare_copy_fdt or r7, r0, r0 /* clear R7 when not valid DTB */ bnei r11, no_fdt_arg /* No - get out of here */ -- cgit v1.2.3-18-g5258 From 9c749e177ccc0b3ee9589425c7255079e7a726fc Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 28 Jan 2011 13:14:58 +0100 Subject: microblaze: Fix unaligned issue on MMU system with BS=0 DIV=1 Unaligned code use shift for finding register operand. There is used BSRLI(r8,r8,2) macro which is expand for BS=0, DIV=1 by ori rD, r0, (1 << imm); \ idivu rD, rD, rA but if rD is equal rA then ori instruction rewrite value which should be devide. The patch remove this macro which use idivu instruction because idivu takes 32/34 cycles. The highest shifting is 20 which takes 20 cycles. Signed-off-by: Michal Simek --- arch/microblaze/kernel/hw_exception_handler.S | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S index 25f6e07d8de..782680de312 100644 --- a/arch/microblaze/kernel/hw_exception_handler.S +++ b/arch/microblaze/kernel/hw_exception_handler.S @@ -147,10 +147,6 @@ #if CONFIG_XILINX_MICROBLAZE0_USE_BARREL > 0 #define BSRLI(rD, rA, imm) \ bsrli rD, rA, imm - #elif CONFIG_XILINX_MICROBLAZE0_USE_DIV > 0 - #define BSRLI(rD, rA, imm) \ - ori rD, r0, (1 << imm); \ - idivu rD, rD, rA #else #define BSRLI(rD, rA, imm) BSRLI ## imm (rD, rA) /* Only the used shift constants defined here - add more if needed */ -- cgit v1.2.3-18-g5258 From de93c3c119382cb888ca8a94b642dbcf8035525e Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 28 Jan 2011 13:26:54 +0100 Subject: microblaze: Fix ASM optimized code for LE Microblaze little-endian doesn't support ASM optimized library functions(memcpy/memmove). Kconfig doens't contain any information about endian that's why it is necessary to check it in the source code. The code is used with barrel shifter is used. Signed-off-by: Michal Simek --- arch/microblaze/lib/fastcopy.S | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/microblaze/lib/fastcopy.S b/arch/microblaze/lib/fastcopy.S index fdc48bb065d..62021d7e249 100644 --- a/arch/microblaze/lib/fastcopy.S +++ b/arch/microblaze/lib/fastcopy.S @@ -29,6 +29,10 @@ * between mem locations with size of xfer spec'd in bytes */ +#ifdef __MICROBLAZEEL__ +#error Microblaze LE not support ASM optimized lib func. Disable OPT_LIB_ASM. +#endif + #include .text .globl memcpy -- cgit v1.2.3-18-g5258 From bd22a2f1982fa3e90ce7d5d011c37d88aa67e73c Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 23 Jan 2011 14:37:27 +0100 Subject: x86: Kill unused static boot_cpu_logical_apicid in smpboot.c Signed-off-by: Tejun Heo Reviewed-by: Pekka Enberg Acked-by: Yinghai Lu Cc: eric.dumazet@gmail.com Cc: yinghai@kernel.org Cc: brgerst@gmail.com Cc: gorcunov@gmail.com Cc: shaohui.zheng@intel.com Cc: rientjes@google.com LKML-Reference: <1295789862-25482-2-git-send-email-tj@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/kernel/smpboot.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 0cbe8c0b35e..ee9203a17d6 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -165,8 +165,6 @@ static void unmap_cpu_to_node(int cpu) #endif #ifdef CONFIG_X86_32 -static int boot_cpu_logical_apicid; - u8 cpu_2_logical_apicid[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = BAD_APICID }; @@ -1096,9 +1094,7 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus) * Setup boot CPU information */ smp_store_cpu_info(0); /* Final full version of the data */ -#ifdef CONFIG_X86_32 - boot_cpu_logical_apicid = logical_smp_processor_id(); -#endif + current_thread_info()->cpu = 0; /* needed? */ for_each_possible_cpu(i) { zalloc_cpumask_var(&per_cpu(cpu_sibling_map, i), GFP_KERNEL); -- cgit v1.2.3-18-g5258 From b78aa66b1fe4179d28e3f6502dc179773519a1bb Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 23 Jan 2011 14:37:28 +0100 Subject: x86: Drop x86_32 MAX_APICID Commit 56d91f13 (x86, acpi: Add MAX_LOCAL_APIC for 32bit) added MAX_LOCAL_APIC for x86_32 but didn't replace MAX_APICID users with it. Convert MAX_APICID users to MAX_LOCAL_APIC and drop MAX_APICID. Signed-off-by: Tejun Heo Reviewed-by: Pekka Enberg Acked-by: Yinghai Lu Cc: eric.dumazet@gmail.com Cc: yinghai@kernel.org Cc: brgerst@gmail.com Cc: gorcunov@gmail.com Cc: shaohui.zheng@intel.com Cc: rientjes@google.com LKML-Reference: <1295789862-25482-3-git-send-email-tj@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/mpspec.h | 2 -- arch/x86/kernel/smpboot.c | 2 +- arch/x86/mm/srat_32.c | 4 ++-- 3 files changed, 3 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h index 0c90dd9f050..edc2a455b72 100644 --- a/arch/x86/include/asm/mpspec.h +++ b/arch/x86/include/asm/mpspec.h @@ -33,8 +33,6 @@ extern int mp_bus_id_to_local[MAX_MP_BUSSES]; extern int quad_local_to_mp_bus_id [NR_CPUS/4][4]; #endif -#define MAX_APICID 256 - #else /* CONFIG_X86_64: */ #define MAX_MP_BUSSES 256 diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index ee9203a17d6..53a85baaecc 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -72,7 +72,7 @@ #include #ifdef CONFIG_X86_32 -u8 apicid_2_node[MAX_APICID]; +u8 apicid_2_node[MAX_LOCAL_APIC]; #endif /* State of each CPU */ diff --git a/arch/x86/mm/srat_32.c b/arch/x86/mm/srat_32.c index ae96e7b8051..6027a481000 100644 --- a/arch/x86/mm/srat_32.c +++ b/arch/x86/mm/srat_32.c @@ -57,7 +57,7 @@ struct node_memory_chunk_s { static struct node_memory_chunk_s __initdata node_memory_chunk[MAXCHUNKS]; static int __initdata num_memory_chunks; /* total number of memory chunks */ -static u8 __initdata apicid_to_pxm[MAX_APICID]; +static u8 __initdata apicid_to_pxm[MAX_LOCAL_APIC]; int acpi_numa __initdata; @@ -254,7 +254,7 @@ int __init get_memcfg_from_srat(void) printk(KERN_DEBUG "Number of memory chunks in system = %d\n", num_memory_chunks); - for (i = 0; i < MAX_APICID; i++) + for (i = 0; i < MAX_LOCAL_APIC; i++) apicid_2_node[i] = pxm_to_node(apicid_to_pxm[i]); for (j = 0; j < num_memory_chunks; j++){ -- cgit v1.2.3-18-g5258 From 1245e1668c6e52bee76a423f8fab3bfcdd6226ae Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 23 Jan 2011 14:37:29 +0100 Subject: x86: Make default_send_IPI_mask_sequence/allbutself_logical() 32bit only Both functions are used only in 32bit. Put them inside CONFIG_X86_32. This is to prepare for logical apicid handling update. - Cyrill Gorcunov spotted that I forgot to move declarations in ipi.h under CONFIG_X86_32. Fixed. Signed-off-by: Tejun Heo Reviewed-by: Pekka Enberg Reviewed-by: Cyrill Gorcunov Acked-by: Yinghai Lu Cc: eric.dumazet@gmail.com Cc: brgerst@gmail.com Cc: shaohui.zheng@intel.com Cc: rientjes@google.com LKML-Reference: <1295789862-25482-4-git-send-email-tj@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/ipi.h | 8 ++++---- arch/x86/kernel/apic/ipi.c | 4 ++-- 2 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/ipi.h b/arch/x86/include/asm/ipi.h index 0b7228268a6..615fa9061b5 100644 --- a/arch/x86/include/asm/ipi.h +++ b/arch/x86/include/asm/ipi.h @@ -123,10 +123,6 @@ extern void default_send_IPI_mask_sequence_phys(const struct cpumask *mask, int vector); extern void default_send_IPI_mask_allbutself_phys(const struct cpumask *mask, int vector); -extern void default_send_IPI_mask_sequence_logical(const struct cpumask *mask, - int vector); -extern void default_send_IPI_mask_allbutself_logical(const struct cpumask *mask, - int vector); /* Avoid include hell */ #define NMI_VECTOR 0x02 @@ -150,6 +146,10 @@ static inline void __default_local_send_IPI_all(int vector) } #ifdef CONFIG_X86_32 +extern void default_send_IPI_mask_sequence_logical(const struct cpumask *mask, + int vector); +extern void default_send_IPI_mask_allbutself_logical(const struct cpumask *mask, + int vector); extern void default_send_IPI_mask_logical(const struct cpumask *mask, int vector); extern void default_send_IPI_allbutself(int vector); diff --git a/arch/x86/kernel/apic/ipi.c b/arch/x86/kernel/apic/ipi.c index 08385e090a6..5037736c460 100644 --- a/arch/x86/kernel/apic/ipi.c +++ b/arch/x86/kernel/apic/ipi.c @@ -56,6 +56,8 @@ void default_send_IPI_mask_allbutself_phys(const struct cpumask *mask, local_irq_restore(flags); } +#ifdef CONFIG_X86_32 + void default_send_IPI_mask_sequence_logical(const struct cpumask *mask, int vector) { @@ -96,8 +98,6 @@ void default_send_IPI_mask_allbutself_logical(const struct cpumask *mask, local_irq_restore(flags); } -#ifdef CONFIG_X86_32 - /* * This is only used on smaller machines. */ -- cgit v1.2.3-18-g5258 From 4c321ff8a01a95badf5d5403d80ca4e0ab07fce7 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 23 Jan 2011 14:37:30 +0100 Subject: x86: Replace cpu_2_logical_apicid[] with early percpu variable Unlike x86_64, on x86_32, the mapping from cpu to logical apicid may vary depending on apic in use. cpu_2_logical_apicid[] array is used for this mapping. Replace it with early percpu variable x86_cpu_to_logical_apicid to make it better aligned with other mappings. Signed-off-by: Tejun Heo Cc: eric.dumazet@gmail.com Cc: yinghai@kernel.org Cc: brgerst@gmail.com Cc: gorcunov@gmail.com Cc: penberg@kernel.org Cc: shaohui.zheng@intel.com Cc: rientjes@google.com LKML-Reference: <1295789862-25482-5-git-send-email-tj@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/apic.h | 4 ---- arch/x86/include/asm/smp.h | 3 +++ arch/x86/kernel/apic/apic.c | 11 +++++++++++ arch/x86/kernel/apic/es7000_32.c | 2 +- arch/x86/kernel/apic/numaq_32.c | 2 +- arch/x86/kernel/apic/summit_32.c | 4 ++-- arch/x86/kernel/setup_percpu.c | 7 +++++++ arch/x86/kernel/smpboot.c | 7 ++----- 8 files changed, 27 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h index 5e3969c36d7..eb139eced85 100644 --- a/arch/x86/include/asm/apic.h +++ b/arch/x86/include/asm/apic.h @@ -595,8 +595,4 @@ extern int default_check_phys_apicid_present(int phys_apicid); #endif /* CONFIG_X86_LOCAL_APIC */ -#ifdef CONFIG_X86_32 -extern u8 cpu_2_logical_apicid[NR_CPUS]; -#endif - #endif /* _ASM_X86_APIC_H */ diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h index 4c2f63c7fc1..dc7c46a89db 100644 --- a/arch/x86/include/asm/smp.h +++ b/arch/x86/include/asm/smp.h @@ -38,6 +38,9 @@ static inline struct cpumask *cpu_core_mask(int cpu) DECLARE_EARLY_PER_CPU(u16, x86_cpu_to_apicid); DECLARE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid); +#if defined(CONFIG_SMP) && defined(CONFIG_X86_32) +DECLARE_EARLY_PER_CPU(int, x86_cpu_to_logical_apicid); +#endif /* Static state in head.S used to set up a CPU */ extern struct { diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 06c196d7e59..126d5a3b00e 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -78,6 +78,17 @@ EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_apicid); EXPORT_EARLY_PER_CPU_SYMBOL(x86_bios_cpu_apicid); #ifdef CONFIG_X86_32 + +#ifdef CONFIG_SMP +/* + * On x86_32, the mapping between cpu and logical apicid may vary + * depending on apic in use. The following early percpu variable is + * used for the mapping. This is where the behaviors of x86_64 and 32 + * actually diverge. Let's keep it ugly for now. + */ +DEFINE_EARLY_PER_CPU(int, x86_cpu_to_logical_apicid, BAD_APICID); +#endif + /* * Knob to control our willingness to enable the local APIC. * diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c index 8593582d802..7cb73e12f78 100644 --- a/arch/x86/kernel/apic/es7000_32.c +++ b/arch/x86/kernel/apic/es7000_32.c @@ -534,7 +534,7 @@ static int es7000_cpu_to_logical_apicid(int cpu) #ifdef CONFIG_SMP if (cpu >= nr_cpu_ids) return BAD_APICID; - return cpu_2_logical_apicid[cpu]; + return early_per_cpu(x86_cpu_to_logical_apicid, cpu); #else return logical_smp_processor_id(); #endif diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c index 960f26ab5c9..4ed90c4882e 100644 --- a/arch/x86/kernel/apic/numaq_32.c +++ b/arch/x86/kernel/apic/numaq_32.c @@ -377,7 +377,7 @@ static inline int numaq_cpu_to_logical_apicid(int cpu) { if (cpu >= nr_cpu_ids) return BAD_APICID; - return cpu_2_logical_apicid[cpu]; + return early_per_cpu(x86_cpu_to_logical_apicid, cpu); } /* diff --git a/arch/x86/kernel/apic/summit_32.c b/arch/x86/kernel/apic/summit_32.c index 9b419263d90..82cfc3ea70d 100644 --- a/arch/x86/kernel/apic/summit_32.c +++ b/arch/x86/kernel/apic/summit_32.c @@ -206,7 +206,7 @@ static void summit_init_apic_ldr(void) /* Create logical APIC IDs by counting CPUs already in cluster. */ for (count = 0, i = nr_cpu_ids; --i >= 0; ) { - lid = cpu_2_logical_apicid[i]; + lid = early_per_cpu(x86_cpu_to_logical_apicid, i); if (lid != BAD_APICID && APIC_CLUSTER(lid) == my_cluster) ++count; } @@ -247,7 +247,7 @@ static inline int summit_cpu_to_logical_apicid(int cpu) #ifdef CONFIG_SMP if (cpu >= nr_cpu_ids) return BAD_APICID; - return cpu_2_logical_apicid[cpu]; + return early_per_cpu(x86_cpu_to_logical_apicid, cpu); #else return logical_smp_processor_id(); #endif diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c index 002b79685f7..b5147f00f0e 100644 --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -225,6 +225,10 @@ void __init setup_per_cpu_areas(void) per_cpu(x86_bios_cpu_apicid, cpu) = early_per_cpu_map(x86_bios_cpu_apicid, cpu); #endif +#ifdef CONFIG_X86_32 + per_cpu(x86_cpu_to_logical_apicid, cpu) = + early_per_cpu_map(x86_cpu_to_logical_apicid, cpu); +#endif #ifdef CONFIG_X86_64 per_cpu(irq_stack_ptr, cpu) = per_cpu(irq_stack_union.irq_stack, cpu) + @@ -256,6 +260,9 @@ void __init setup_per_cpu_areas(void) early_per_cpu_ptr(x86_cpu_to_apicid) = NULL; early_per_cpu_ptr(x86_bios_cpu_apicid) = NULL; #endif +#ifdef CONFIG_X86_32 + early_per_cpu_ptr(x86_cpu_to_logical_apicid) = NULL; +#endif #if defined(CONFIG_X86_64) && defined(CONFIG_NUMA) early_per_cpu_ptr(x86_cpu_to_node_map) = NULL; #endif diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 53a85baaecc..df934e46bf5 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -165,9 +165,6 @@ static void unmap_cpu_to_node(int cpu) #endif #ifdef CONFIG_X86_32 -u8 cpu_2_logical_apicid[NR_CPUS] __read_mostly = - { [0 ... NR_CPUS-1] = BAD_APICID }; - static void map_cpu_to_logical_apicid(void) { int cpu = smp_processor_id(); @@ -177,13 +174,13 @@ static void map_cpu_to_logical_apicid(void) if (!node_online(node)) node = first_online_node; - cpu_2_logical_apicid[cpu] = apicid; + early_per_cpu(x86_cpu_to_logical_apicid, cpu) = apicid; map_cpu_to_node(cpu, node); } void numa_remove_cpu(int cpu) { - cpu_2_logical_apicid[cpu] = BAD_APICID; + early_per_cpu(x86_cpu_to_logical_apicid, cpu) = BAD_APICID; unmap_cpu_to_node(cpu); } #else -- cgit v1.2.3-18-g5258 From 6f802c4bfa2acf1bffa8341fe9084da0205d581d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 23 Jan 2011 14:37:31 +0100 Subject: x86: Always use x86_cpu_to_logical_apicid for cpu -> logical apic id Currently, cpu -> logical apic id translation is done by apic->cpu_to_logical_apicid() callback which may or may not use x86_cpu_to_logical_apicid. This is unnecessary as it should always equal logical_smp_processor_id() which is known early during CPU bring up. Initialize x86_cpu_to_logical_apicid after apic->init_apic_ldr() in setup_local_APIC() and always use x86_cpu_to_logical_apicid for cpu -> logical apic id mapping. Signed-off-by: Tejun Heo Cc: eric.dumazet@gmail.com Cc: yinghai@kernel.org Cc: brgerst@gmail.com Cc: gorcunov@gmail.com Cc: penberg@kernel.org Cc: shaohui.zheng@intel.com Cc: rientjes@google.com LKML-Reference: <1295789862-25482-6-git-send-email-tj@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/apic.c | 8 ++++++++ arch/x86/kernel/apic/ipi.c | 8 ++++---- arch/x86/kernel/smpboot.c | 7 +++---- 3 files changed, 15 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 126d5a3b00e..ae08246f320 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1248,6 +1248,14 @@ void __cpuinit setup_local_APIC(void) */ apic->init_apic_ldr(); +#ifdef CONFIG_X86_32 + /* + * APIC LDR is initialized. Fetch and store logical_apic_id. + */ + early_per_cpu(x86_cpu_to_logical_apicid, cpu) = + logical_smp_processor_id(); +#endif + /* * Set Task Priority to 'accept all'. We never change this * later on. diff --git a/arch/x86/kernel/apic/ipi.c b/arch/x86/kernel/apic/ipi.c index 5037736c460..cce91bf2667 100644 --- a/arch/x86/kernel/apic/ipi.c +++ b/arch/x86/kernel/apic/ipi.c @@ -73,8 +73,8 @@ void default_send_IPI_mask_sequence_logical(const struct cpumask *mask, local_irq_save(flags); for_each_cpu(query_cpu, mask) __default_send_IPI_dest_field( - apic->cpu_to_logical_apicid(query_cpu), vector, - apic->dest_logical); + early_per_cpu(x86_cpu_to_logical_apicid, query_cpu), + vector, apic->dest_logical); local_irq_restore(flags); } @@ -92,8 +92,8 @@ void default_send_IPI_mask_allbutself_logical(const struct cpumask *mask, if (query_cpu == this_cpu) continue; __default_send_IPI_dest_field( - apic->cpu_to_logical_apicid(query_cpu), vector, - apic->dest_logical); + early_per_cpu(x86_cpu_to_logical_apicid, query_cpu), + vector, apic->dest_logical); } local_irq_restore(flags); } diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index df934e46bf5..ca20f6bee3b 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -168,19 +168,18 @@ static void unmap_cpu_to_node(int cpu) static void map_cpu_to_logical_apicid(void) { int cpu = smp_processor_id(); - int apicid = logical_smp_processor_id(); - int node = apic->apicid_to_node(apicid); + int logical_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu); + int node; + node = apic->apicid_to_node(logical_apicid); if (!node_online(node)) node = first_online_node; - early_per_cpu(x86_cpu_to_logical_apicid, cpu) = apicid; map_cpu_to_node(cpu, node); } void numa_remove_cpu(int cpu) { - early_per_cpu(x86_cpu_to_logical_apicid, cpu) = BAD_APICID; unmap_cpu_to_node(cpu); } #else -- cgit v1.2.3-18-g5258 From 7632611f534340182c832d2b139cb19676f24e1a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 23 Jan 2011 14:37:32 +0100 Subject: x86: Kill apic->cpu_to_logical_apicid() After the previous patch, apic->cpu_to_logical_apicid() is no longer used. Kill it. For apic types with custom cpu_to_logical_apicid() which is also used for other purposes, remove the function and modify its users to do the mapping directly. #ifdef's on CONFIG_SMP in es7000_32 and summit_32 are ignored during conversion as they are not used for UP kernels. Signed-off-by: Tejun Heo Cc: eric.dumazet@gmail.com Cc: yinghai@kernel.org Cc: brgerst@gmail.com Cc: gorcunov@gmail.com Cc: penberg@kernel.org Cc: shaohui.zheng@intel.com Cc: rientjes@google.com LKML-Reference: <1295789862-25482-7-git-send-email-tj@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/apic.h | 7 ------- arch/x86/kernel/apic/apic_flat_64.c | 2 -- arch/x86/kernel/apic/apic_noop.c | 6 ------ arch/x86/kernel/apic/bigsmp_32.c | 19 +++++++------------ arch/x86/kernel/apic/es7000_32.c | 18 ++---------------- arch/x86/kernel/apic/numaq_32.c | 8 -------- arch/x86/kernel/apic/probe_32.c | 1 - arch/x86/kernel/apic/summit_32.c | 17 ++--------------- arch/x86/kernel/apic/x2apic_cluster.c | 1 - arch/x86/kernel/apic/x2apic_phys.c | 1 - arch/x86/kernel/apic/x2apic_uv_x.c | 1 - 11 files changed, 11 insertions(+), 70 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h index eb139eced85..d1aa0c3e7a5 100644 --- a/arch/x86/include/asm/apic.h +++ b/arch/x86/include/asm/apic.h @@ -307,7 +307,6 @@ struct apic { void (*setup_apic_routing)(void); int (*multi_timer_check)(int apic, int irq); int (*apicid_to_node)(int logical_apicid); - int (*cpu_to_logical_apicid)(int cpu); int (*cpu_present_to_apicid)(int mps_cpu); void (*apicid_to_cpu_present)(int phys_apicid, physid_mask_t *retmap); void (*setup_portio_remap)(void); @@ -557,12 +556,6 @@ static inline void default_ioapic_phys_id_map(physid_mask_t *phys_map, physid_ma *retmap = *phys_map; } -/* Mapping from cpu number to logical apicid */ -static inline int default_cpu_to_logical_apicid(int cpu) -{ - return 1 << cpu; -} - static inline int __default_cpu_present_to_apicid(int mps_cpu) { if (mps_cpu < nr_cpu_ids && cpu_present(mps_cpu)) diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c index 09d3b17ce0c..5a9d11a94b5 100644 --- a/arch/x86/kernel/apic/apic_flat_64.c +++ b/arch/x86/kernel/apic/apic_flat_64.c @@ -186,7 +186,6 @@ struct apic apic_flat = { .setup_apic_routing = NULL, .multi_timer_check = NULL, .apicid_to_node = NULL, - .cpu_to_logical_apicid = NULL, .cpu_present_to_apicid = default_cpu_present_to_apicid, .apicid_to_cpu_present = NULL, .setup_portio_remap = NULL, @@ -338,7 +337,6 @@ struct apic apic_physflat = { .setup_apic_routing = NULL, .multi_timer_check = NULL, .apicid_to_node = NULL, - .cpu_to_logical_apicid = NULL, .cpu_present_to_apicid = default_cpu_present_to_apicid, .apicid_to_cpu_present = NULL, .setup_portio_remap = NULL, diff --git a/arch/x86/kernel/apic/apic_noop.c b/arch/x86/kernel/apic/apic_noop.c index e31b9ffe25f..f3d19b2426a 100644 --- a/arch/x86/kernel/apic/apic_noop.c +++ b/arch/x86/kernel/apic/apic_noop.c @@ -54,11 +54,6 @@ static u64 noop_apic_icr_read(void) return 0; } -static int noop_cpu_to_logical_apicid(int cpu) -{ - return 0; -} - static int noop_phys_pkg_id(int cpuid_apic, int index_msb) { return 0; @@ -155,7 +150,6 @@ struct apic apic_noop = { .multi_timer_check = NULL, .apicid_to_node = noop_apicid_to_node, - .cpu_to_logical_apicid = noop_cpu_to_logical_apicid, .cpu_present_to_apicid = default_cpu_present_to_apicid, .apicid_to_cpu_present = physid_set_mask_of_physid, diff --git a/arch/x86/kernel/apic/bigsmp_32.c b/arch/x86/kernel/apic/bigsmp_32.c index cb804c5091b..4c62592d686 100644 --- a/arch/x86/kernel/apic/bigsmp_32.c +++ b/arch/x86/kernel/apic/bigsmp_32.c @@ -93,14 +93,6 @@ static int bigsmp_cpu_present_to_apicid(int mps_cpu) return BAD_APICID; } -/* Mapping from cpu number to logical apicid */ -static inline int bigsmp_cpu_to_logical_apicid(int cpu) -{ - if (cpu >= nr_cpu_ids) - return BAD_APICID; - return cpu_physical_id(cpu); -} - static void bigsmp_ioapic_phys_id_map(physid_mask_t *phys_map, physid_mask_t *retmap) { /* For clustered we don't have a good way to do this yet - hack */ @@ -115,7 +107,11 @@ static int bigsmp_check_phys_apicid_present(int phys_apicid) /* As we are using single CPU as destination, pick only one CPU here */ static unsigned int bigsmp_cpu_mask_to_apicid(const struct cpumask *cpumask) { - return bigsmp_cpu_to_logical_apicid(cpumask_first(cpumask)); + int cpu = cpumask_first(cpumask); + + if (cpu < nr_cpu_ids) + return cpu_physical_id(cpu); + return BAD_APICID; } static unsigned int bigsmp_cpu_mask_to_apicid_and(const struct cpumask *cpumask, @@ -129,9 +125,9 @@ static unsigned int bigsmp_cpu_mask_to_apicid_and(const struct cpumask *cpumask, */ for_each_cpu_and(cpu, cpumask, andmask) { if (cpumask_test_cpu(cpu, cpu_online_mask)) - break; + return cpu_physical_id(cpu); } - return bigsmp_cpu_to_logical_apicid(cpu); + return BAD_APICID; } static int bigsmp_phys_pkg_id(int cpuid_apic, int index_msb) @@ -220,7 +216,6 @@ struct apic apic_bigsmp = { .setup_apic_routing = bigsmp_setup_apic_routing, .multi_timer_check = NULL, .apicid_to_node = bigsmp_apicid_to_node, - .cpu_to_logical_apicid = bigsmp_cpu_to_logical_apicid, .cpu_present_to_apicid = bigsmp_cpu_present_to_apicid, .apicid_to_cpu_present = physid_set_mask_of_physid, .setup_portio_remap = NULL, diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c index 7cb73e12f78..6840681a3f1 100644 --- a/arch/x86/kernel/apic/es7000_32.c +++ b/arch/x86/kernel/apic/es7000_32.c @@ -528,18 +528,6 @@ static void es7000_apicid_to_cpu_present(int phys_apicid, physid_mask_t *retmap) ++cpu_id; } -/* Mapping from cpu number to logical apicid */ -static int es7000_cpu_to_logical_apicid(int cpu) -{ -#ifdef CONFIG_SMP - if (cpu >= nr_cpu_ids) - return BAD_APICID; - return early_per_cpu(x86_cpu_to_logical_apicid, cpu); -#else - return logical_smp_processor_id(); -#endif -} - static void es7000_ioapic_phys_id_map(physid_mask_t *phys_map, physid_mask_t *retmap) { /* For clustered we don't have a good way to do this yet - hack */ @@ -561,7 +549,7 @@ static unsigned int es7000_cpu_mask_to_apicid(const struct cpumask *cpumask) * The cpus in the mask must all be on the apic cluster. */ for_each_cpu(cpu, cpumask) { - int new_apicid = es7000_cpu_to_logical_apicid(cpu); + int new_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu); if (round && APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) { WARN(1, "Not a valid mask!"); @@ -578,7 +566,7 @@ static unsigned int es7000_cpu_mask_to_apicid_and(const struct cpumask *inmask, const struct cpumask *andmask) { - int apicid = es7000_cpu_to_logical_apicid(0); + int apicid = early_per_cpu(x86_cpu_to_logical_apicid, 0); cpumask_var_t cpumask; if (!alloc_cpumask_var(&cpumask, GFP_ATOMIC)) @@ -656,7 +644,6 @@ struct apic __refdata apic_es7000_cluster = { .setup_apic_routing = es7000_setup_apic_routing, .multi_timer_check = NULL, .apicid_to_node = es7000_apicid_to_node, - .cpu_to_logical_apicid = es7000_cpu_to_logical_apicid, .cpu_present_to_apicid = es7000_cpu_present_to_apicid, .apicid_to_cpu_present = es7000_apicid_to_cpu_present, .setup_portio_remap = NULL, @@ -721,7 +708,6 @@ struct apic __refdata apic_es7000 = { .setup_apic_routing = es7000_setup_apic_routing, .multi_timer_check = NULL, .apicid_to_node = es7000_apicid_to_node, - .cpu_to_logical_apicid = es7000_cpu_to_logical_apicid, .cpu_present_to_apicid = es7000_cpu_present_to_apicid, .apicid_to_cpu_present = es7000_apicid_to_cpu_present, .setup_portio_remap = NULL, diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c index 4ed90c4882e..2b434d579e1 100644 --- a/arch/x86/kernel/apic/numaq_32.c +++ b/arch/x86/kernel/apic/numaq_32.c @@ -373,13 +373,6 @@ static inline void numaq_ioapic_phys_id_map(physid_mask_t *phys_map, physid_mask return physids_promote(0xFUL, retmap); } -static inline int numaq_cpu_to_logical_apicid(int cpu) -{ - if (cpu >= nr_cpu_ids) - return BAD_APICID; - return early_per_cpu(x86_cpu_to_logical_apicid, cpu); -} - /* * Supporting over 60 cpus on NUMA-Q requires a locality-dependent * cpu to APIC ID relation to properly interact with the intelligent @@ -509,7 +502,6 @@ struct apic __refdata apic_numaq = { .setup_apic_routing = numaq_setup_apic_routing, .multi_timer_check = numaq_multi_timer_check, .apicid_to_node = numaq_apicid_to_node, - .cpu_to_logical_apicid = numaq_cpu_to_logical_apicid, .cpu_present_to_apicid = numaq_cpu_present_to_apicid, .apicid_to_cpu_present = numaq_apicid_to_cpu_present, .setup_portio_remap = numaq_setup_portio_remap, diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c index 99d2fe01608..24a68281101 100644 --- a/arch/x86/kernel/apic/probe_32.c +++ b/arch/x86/kernel/apic/probe_32.c @@ -131,7 +131,6 @@ struct apic apic_default = { .setup_apic_routing = setup_apic_flat_routing, .multi_timer_check = NULL, .apicid_to_node = default_apicid_to_node, - .cpu_to_logical_apicid = default_cpu_to_logical_apicid, .cpu_present_to_apicid = default_cpu_present_to_apicid, .apicid_to_cpu_present = physid_set_mask_of_physid, .setup_portio_remap = NULL, diff --git a/arch/x86/kernel/apic/summit_32.c b/arch/x86/kernel/apic/summit_32.c index 82cfc3ea70d..1ef4c14f4d6 100644 --- a/arch/x86/kernel/apic/summit_32.c +++ b/arch/x86/kernel/apic/summit_32.c @@ -241,18 +241,6 @@ static int summit_apicid_to_node(int logical_apicid) #endif } -/* Mapping from cpu number to logical apicid */ -static inline int summit_cpu_to_logical_apicid(int cpu) -{ -#ifdef CONFIG_SMP - if (cpu >= nr_cpu_ids) - return BAD_APICID; - return early_per_cpu(x86_cpu_to_logical_apicid, cpu); -#else - return logical_smp_processor_id(); -#endif -} - static int summit_cpu_present_to_apicid(int mps_cpu) { if (mps_cpu < nr_cpu_ids) @@ -286,7 +274,7 @@ static unsigned int summit_cpu_mask_to_apicid(const struct cpumask *cpumask) * The cpus in the mask must all be on the apic cluster. */ for_each_cpu(cpu, cpumask) { - int new_apicid = summit_cpu_to_logical_apicid(cpu); + int new_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu); if (round && APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) { printk("%s: Not a valid mask!\n", __func__); @@ -301,7 +289,7 @@ static unsigned int summit_cpu_mask_to_apicid(const struct cpumask *cpumask) static unsigned int summit_cpu_mask_to_apicid_and(const struct cpumask *inmask, const struct cpumask *andmask) { - int apicid = summit_cpu_to_logical_apicid(0); + int apicid = early_per_cpu(x86_cpu_to_logical_apicid, 0); cpumask_var_t cpumask; if (!alloc_cpumask_var(&cpumask, GFP_ATOMIC)) @@ -529,7 +517,6 @@ struct apic apic_summit = { .setup_apic_routing = summit_setup_apic_routing, .multi_timer_check = NULL, .apicid_to_node = summit_apicid_to_node, - .cpu_to_logical_apicid = summit_cpu_to_logical_apicid, .cpu_present_to_apicid = summit_cpu_present_to_apicid, .apicid_to_cpu_present = summit_apicid_to_cpu_present, .setup_portio_remap = NULL, diff --git a/arch/x86/kernel/apic/x2apic_cluster.c b/arch/x86/kernel/apic/x2apic_cluster.c index cf69c59f491..badc1fdbea2 100644 --- a/arch/x86/kernel/apic/x2apic_cluster.c +++ b/arch/x86/kernel/apic/x2apic_cluster.c @@ -207,7 +207,6 @@ struct apic apic_x2apic_cluster = { .setup_apic_routing = NULL, .multi_timer_check = NULL, .apicid_to_node = NULL, - .cpu_to_logical_apicid = NULL, .cpu_present_to_apicid = default_cpu_present_to_apicid, .apicid_to_cpu_present = NULL, .setup_portio_remap = NULL, diff --git a/arch/x86/kernel/apic/x2apic_phys.c b/arch/x86/kernel/apic/x2apic_phys.c index 8972f38c5ce..f28bf4c5faf 100644 --- a/arch/x86/kernel/apic/x2apic_phys.c +++ b/arch/x86/kernel/apic/x2apic_phys.c @@ -196,7 +196,6 @@ struct apic apic_x2apic_phys = { .setup_apic_routing = NULL, .multi_timer_check = NULL, .apicid_to_node = NULL, - .cpu_to_logical_apicid = NULL, .cpu_present_to_apicid = default_cpu_present_to_apicid, .apicid_to_cpu_present = NULL, .setup_portio_remap = NULL, diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index bd16b58b885..60276206b72 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -339,7 +339,6 @@ struct apic __refdata apic_x2apic_uv_x = { .setup_apic_routing = NULL, .multi_timer_check = NULL, .apicid_to_node = NULL, - .cpu_to_logical_apicid = NULL, .cpu_present_to_apicid = default_cpu_present_to_apicid, .apicid_to_cpu_present = NULL, .setup_portio_remap = NULL, -- cgit v1.2.3-18-g5258 From acb8bc09c6185e4d3d582d0076aaa6a89f19d8c5 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 23 Jan 2011 14:37:33 +0100 Subject: x86: Add apic->x86_32_early_logical_apicid() On x86_32, the mapping between cpu and logical apic ID differs depending on the specific apic implementation in use. The mapping is initialized while bringing up CPUs; however, this makes early inits ignore memory topology. Add a x86_32 specific apic->x86_32_early_logical_apicid() which is called early during boot to query the mapping. The mapping is later verified against the result of init_apic_ldr(). The method is allowed to return BAD_APICID if it can't be determined early. noop variant which always returns BAD_APICID is implemented and added to all x86_32 apic implementations. Signed-off-by: Tejun Heo Cc: eric.dumazet@gmail.com Cc: yinghai@kernel.org Cc: brgerst@gmail.com Cc: gorcunov@gmail.com Cc: penberg@kernel.org Cc: shaohui.zheng@intel.com Cc: rientjes@google.com LKML-Reference: <1295789862-25482-8-git-send-email-tj@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/apic.h | 19 +++++++++++++++++++ arch/x86/kernel/apic/apic.c | 12 ++++++++++-- arch/x86/kernel/apic/apic_noop.c | 4 ++++ arch/x86/kernel/apic/bigsmp_32.c | 2 ++ arch/x86/kernel/apic/es7000_32.c | 4 ++++ arch/x86/kernel/apic/numaq_32.c | 2 ++ arch/x86/kernel/apic/probe_32.c | 2 ++ arch/x86/kernel/apic/summit_32.c | 2 ++ 8 files changed, 45 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h index d1aa0c3e7a5..efb073b5c74 100644 --- a/arch/x86/include/asm/apic.h +++ b/arch/x86/include/asm/apic.h @@ -354,6 +354,20 @@ struct apic { void (*icr_write)(u32 low, u32 high); void (*wait_icr_idle)(void); u32 (*safe_wait_icr_idle)(void); + +#ifdef CONFIG_X86_32 + /* + * Called very early during boot from get_smp_config(). It should + * return the logical apicid. x86_[bios]_cpu_to_apicid is + * initialized before this function is called. + * + * If logical apicid can't be determined that early, the function + * may return BAD_APICID. Logical apicid will be configured after + * init_apic_ldr() while bringing up CPUs. Note that NUMA affinity + * won't be applied properly during early boot in this case. + */ + int (*x86_32_early_logical_apicid)(int cpu); +#endif }; /* @@ -501,6 +515,11 @@ extern struct apic apic_noop; extern struct apic apic_default; +static inline int noop_x86_32_early_logical_apicid(int cpu) +{ + return BAD_APICID; +} + /* * Set up the logical destination ID. * diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index ae08246f320..3127079628e 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1250,8 +1250,13 @@ void __cpuinit setup_local_APIC(void) #ifdef CONFIG_X86_32 /* - * APIC LDR is initialized. Fetch and store logical_apic_id. + * APIC LDR is initialized. If logical_apicid mapping was + * initialized during get_smp_config(), make sure it matches the + * actual value. */ + i = early_per_cpu(x86_cpu_to_logical_apicid, cpu); + WARN_ON(i != BAD_APICID && i != logical_smp_processor_id()); + /* always use the value from LDR */ early_per_cpu(x86_cpu_to_logical_apicid, cpu) = logical_smp_processor_id(); #endif @@ -1991,7 +1996,10 @@ void __cpuinit generic_processor_info(int apicid, int version) early_per_cpu(x86_cpu_to_apicid, cpu) = apicid; early_per_cpu(x86_bios_cpu_apicid, cpu) = apicid; #endif - +#ifdef CONFIG_X86_32 + early_per_cpu(x86_cpu_to_logical_apicid, cpu) = + apic->x86_32_early_logical_apicid(cpu); +#endif set_cpu_possible(cpu, true); set_cpu_present(cpu, true); } diff --git a/arch/x86/kernel/apic/apic_noop.c b/arch/x86/kernel/apic/apic_noop.c index f3d19b2426a..0309c58d96b 100644 --- a/arch/x86/kernel/apic/apic_noop.c +++ b/arch/x86/kernel/apic/apic_noop.c @@ -191,4 +191,8 @@ struct apic apic_noop = { .icr_write = noop_apic_icr_write, .wait_icr_idle = noop_apic_wait_icr_idle, .safe_wait_icr_idle = noop_safe_apic_wait_icr_idle, + +#ifdef CONFIG_X86_32 + .x86_32_early_logical_apicid = noop_x86_32_early_logical_apicid, +#endif }; diff --git a/arch/x86/kernel/apic/bigsmp_32.c b/arch/x86/kernel/apic/bigsmp_32.c index 4c62592d686..dd32a9b78a8 100644 --- a/arch/x86/kernel/apic/bigsmp_32.c +++ b/arch/x86/kernel/apic/bigsmp_32.c @@ -251,4 +251,6 @@ struct apic apic_bigsmp = { .icr_write = native_apic_icr_write, .wait_icr_idle = native_apic_wait_icr_idle, .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, + + .x86_32_early_logical_apicid = noop_x86_32_early_logical_apicid, }; diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c index 6840681a3f1..0ffc1eca577 100644 --- a/arch/x86/kernel/apic/es7000_32.c +++ b/arch/x86/kernel/apic/es7000_32.c @@ -682,6 +682,8 @@ struct apic __refdata apic_es7000_cluster = { .icr_write = native_apic_icr_write, .wait_icr_idle = native_apic_wait_icr_idle, .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, + + .x86_32_early_logical_apicid = noop_x86_32_early_logical_apicid, }; struct apic __refdata apic_es7000 = { @@ -744,4 +746,6 @@ struct apic __refdata apic_es7000 = { .icr_write = native_apic_icr_write, .wait_icr_idle = native_apic_wait_icr_idle, .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, + + .x86_32_early_logical_apicid = noop_x86_32_early_logical_apicid, }; diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c index 2b434d579e1..f1a8b120c49 100644 --- a/arch/x86/kernel/apic/numaq_32.c +++ b/arch/x86/kernel/apic/numaq_32.c @@ -539,4 +539,6 @@ struct apic __refdata apic_numaq = { .icr_write = native_apic_icr_write, .wait_icr_idle = native_apic_wait_icr_idle, .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, + + .x86_32_early_logical_apicid = noop_x86_32_early_logical_apicid, }; diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c index 24a68281101..40be7c3cdfe 100644 --- a/arch/x86/kernel/apic/probe_32.c +++ b/arch/x86/kernel/apic/probe_32.c @@ -166,6 +166,8 @@ struct apic apic_default = { .icr_write = native_apic_icr_write, .wait_icr_idle = native_apic_wait_icr_idle, .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, + + .x86_32_early_logical_apicid = noop_x86_32_early_logical_apicid, }; extern struct apic apic_numaq; diff --git a/arch/x86/kernel/apic/summit_32.c b/arch/x86/kernel/apic/summit_32.c index 1ef4c14f4d6..172c498e888 100644 --- a/arch/x86/kernel/apic/summit_32.c +++ b/arch/x86/kernel/apic/summit_32.c @@ -552,4 +552,6 @@ struct apic apic_summit = { .icr_write = native_apic_icr_write, .wait_icr_idle = native_apic_wait_icr_idle, .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, + + .x86_32_early_logical_apicid = noop_x86_32_early_logical_apicid, }; -- cgit v1.2.3-18-g5258 From 3f6f6798889d50ec7ca8eef1d100cda37dc658ea Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 23 Jan 2011 14:37:34 +0100 Subject: x86: Implement the default x86_32_early_logical_apicid() Implement x86_32_early_logical_apicid() for the default apic flat routing. Signed-off-by: Tejun Heo Cc: eric.dumazet@gmail.com Cc: yinghai@kernel.org Cc: brgerst@gmail.com Cc: gorcunov@gmail.com Cc: penberg@kernel.org Cc: shaohui.zheng@intel.com Cc: rientjes@google.com LKML-Reference: <1295789862-25482-9-git-send-email-tj@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/probe_32.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c index 40be7c3cdfe..0f9a9ab49e7 100644 --- a/arch/x86/kernel/apic/probe_32.c +++ b/arch/x86/kernel/apic/probe_32.c @@ -77,6 +77,11 @@ void __init default_setup_apic_routing(void) apic->setup_apic_routing(); } +static int default_x86_32_early_logical_apicid(int cpu) +{ + return 1 << cpu; +} + static void setup_apic_flat_routing(void) { #ifdef CONFIG_X86_IO_APIC @@ -167,7 +172,7 @@ struct apic apic_default = { .wait_icr_idle = native_apic_wait_icr_idle, .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, - .x86_32_early_logical_apicid = noop_x86_32_early_logical_apicid, + .x86_32_early_logical_apicid = default_x86_32_early_logical_apicid, }; extern struct apic apic_numaq; -- cgit v1.2.3-18-g5258 From 12bf24a47c1a095233cc8a8b863b509a0d8e0f2c Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 23 Jan 2011 14:37:35 +0100 Subject: x86: Implement x86_32_early_logical_apicid() for bigsmp_32 Signed-off-by: Tejun Heo Cc: eric.dumazet@gmail.com Cc: yinghai@kernel.org Cc: brgerst@gmail.com Cc: gorcunov@gmail.com Cc: penberg@kernel.org Cc: shaohui.zheng@intel.com Cc: rientjes@google.com LKML-Reference: <1295789862-25482-10-git-send-email-tj@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/bigsmp_32.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/bigsmp_32.c b/arch/x86/kernel/apic/bigsmp_32.c index dd32a9b78a8..bc7ed040bb0 100644 --- a/arch/x86/kernel/apic/bigsmp_32.c +++ b/arch/x86/kernel/apic/bigsmp_32.c @@ -45,6 +45,12 @@ static unsigned long bigsmp_check_apicid_present(int bit) return 1; } +static int bigsmp_early_logical_apicid(int cpu) +{ + /* on bigsmp, logical apicid is the same as physical */ + return early_per_cpu(x86_cpu_to_apicid, cpu); +} + static inline unsigned long calculate_ldr(int cpu) { unsigned long val, id; @@ -252,5 +258,5 @@ struct apic apic_bigsmp = { .wait_icr_idle = native_apic_wait_icr_idle, .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, - .x86_32_early_logical_apicid = noop_x86_32_early_logical_apicid, + .x86_32_early_logical_apicid = bigsmp_early_logical_apicid, }; -- cgit v1.2.3-18-g5258 From 3b39d937843e071c59b3aeecbf7de4750f095b12 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 23 Jan 2011 14:37:36 +0100 Subject: x86: Implement x86_32_early_logical_apicid() for summit_32 Factor out logical apic id calculation from summit_init_apic_ldr() and use it for the x86_32_early_logical_apicid() callback. Signed-off-by: Tejun Heo Cc: eric.dumazet@gmail.com Cc: yinghai@kernel.org Cc: brgerst@gmail.com Cc: gorcunov@gmail.com Cc: penberg@kernel.org Cc: shaohui.zheng@intel.com Cc: rientjes@google.com LKML-Reference: <1295789862-25482-11-git-send-email-tj@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/summit_32.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/summit_32.c b/arch/x86/kernel/apic/summit_32.c index 172c498e888..8c914732161 100644 --- a/arch/x86/kernel/apic/summit_32.c +++ b/arch/x86/kernel/apic/summit_32.c @@ -194,11 +194,10 @@ static unsigned long summit_check_apicid_present(int bit) return 1; } -static void summit_init_apic_ldr(void) +static int summit_early_logical_apicid(int cpu) { - unsigned long val, id; int count = 0; - u8 my_id = (u8)hard_smp_processor_id(); + u8 my_id = early_per_cpu(x86_cpu_to_apicid, cpu); u8 my_cluster = APIC_CLUSTER(my_id); #ifdef CONFIG_SMP u8 lid; @@ -214,7 +213,15 @@ static void summit_init_apic_ldr(void) /* We only have a 4 wide bitmap in cluster mode. If a deranged * BIOS puts 5 CPUs in one APIC cluster, we're hosed. */ BUG_ON(count >= XAPIC_DEST_CPUS_SHIFT); - id = my_cluster | (1UL << count); + return my_cluster | (1UL << count); +} + +static void summit_init_apic_ldr(void) +{ + int cpu = smp_processor_id(); + unsigned long id = early_per_cpu(x86_cpu_to_logical_apicid, cpu); + unsigned long val; + apic_write(APIC_DFR, SUMMIT_APIC_DFR_VALUE); val = apic_read(APIC_LDR) & ~APIC_LDR_MASK; val |= SET_APIC_LOGICAL_ID(id); @@ -553,5 +560,5 @@ struct apic apic_summit = { .wait_icr_idle = native_apic_wait_icr_idle, .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, - .x86_32_early_logical_apicid = noop_x86_32_early_logical_apicid, + .x86_32_early_logical_apicid = summit_early_logical_apicid, }; -- cgit v1.2.3-18-g5258 From df04cf011b0657ddc782b48d455f7e232b9be41c Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 23 Jan 2011 14:37:37 +0100 Subject: x86: Implement x86_32_early_logical_apicid() for numaq_32 Signed-off-by: Tejun Heo Cc: eric.dumazet@gmail.com Cc: yinghai@kernel.org Cc: brgerst@gmail.com Cc: gorcunov@gmail.com Cc: penberg@kernel.org Cc: shaohui.zheng@intel.com Cc: rientjes@google.com LKML-Reference: <1295789862-25482-12-git-send-email-tj@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/es7000_32.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c index 0ffc1eca577..5c53d053ada 100644 --- a/arch/x86/kernel/apic/es7000_32.c +++ b/arch/x86/kernel/apic/es7000_32.c @@ -460,6 +460,12 @@ static unsigned long es7000_check_apicid_present(int bit) return physid_isset(bit, phys_cpu_present_map); } +static int es7000_early_logical_apicid(int cpu) +{ + /* on es7000, logical apicid is the same as physical */ + return early_per_cpu(x86_bios_cpu_apicid, cpu); +} + static unsigned long calculate_ldr(int cpu) { unsigned long id = per_cpu(x86_bios_cpu_apicid, cpu); @@ -683,7 +689,7 @@ struct apic __refdata apic_es7000_cluster = { .wait_icr_idle = native_apic_wait_icr_idle, .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, - .x86_32_early_logical_apicid = noop_x86_32_early_logical_apicid, + .x86_32_early_logical_apicid = es7000_early_logical_apicid, }; struct apic __refdata apic_es7000 = { @@ -747,5 +753,5 @@ struct apic __refdata apic_es7000 = { .wait_icr_idle = native_apic_wait_icr_idle, .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, - .x86_32_early_logical_apicid = noop_x86_32_early_logical_apicid, + .x86_32_early_logical_apicid = es7000_early_logical_apicid, }; -- cgit v1.2.3-18-g5258 From 89e5dc218e084e13a3996db6693b01478912f4ee Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 23 Jan 2011 14:37:38 +0100 Subject: x86: Replace apic->apicid_to_node() with ->x86_32_numa_cpu_node() apic->apicid_to_node() is 32bit specific apic operation which determines NUMA node for a CPU. Depending on the APIC implementation, it can be easier to determine NUMA node from either physical or logical apicid. Currently, ->apicid_to_node() takes @logical_apicid and calls hard_smp_processor_id() if the physical apicid is needed. This prevents NUMA mapping from being queried from a different CPU, which in turn makes it impossible to initialize NUMA mapping before SMP bringup. This patch replaces apic->apicid_to_node() with ->x86_32_numa_cpu_node() which takes @cpu, from which both logical and physical apicids can easily be determined. While at it, drop duplicate implementations from bigsmp_32 and summit_32, and use the default one. Signed-off-by: Tejun Heo Reviewed-by: Pekka Enberg Cc: eric.dumazet@gmail.com Cc: yinghai@kernel.org Cc: brgerst@gmail.com Cc: gorcunov@gmail.com Cc: shaohui.zheng@intel.com Cc: rientjes@google.com LKML-Reference: <1295789862-25482-13-git-send-email-tj@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/apic.h | 6 ++++-- arch/x86/kernel/apic/apic.c | 10 +++++++--- arch/x86/kernel/apic/apic_flat_64.c | 2 -- arch/x86/kernel/apic/apic_noop.c | 16 +++++++++------- arch/x86/kernel/apic/bigsmp_32.c | 7 +------ arch/x86/kernel/apic/es7000_32.c | 7 +++---- arch/x86/kernel/apic/numaq_32.c | 11 ++++++++++- arch/x86/kernel/apic/probe_32.c | 2 +- arch/x86/kernel/apic/summit_32.c | 11 +---------- arch/x86/kernel/apic/x2apic_cluster.c | 1 - arch/x86/kernel/apic/x2apic_phys.c | 1 - arch/x86/kernel/apic/x2apic_uv_x.c | 1 - arch/x86/kernel/smpboot.c | 3 +-- 13 files changed, 37 insertions(+), 41 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h index efb073b5c74..ad30ca4b6fe 100644 --- a/arch/x86/include/asm/apic.h +++ b/arch/x86/include/asm/apic.h @@ -306,7 +306,6 @@ struct apic { void (*setup_apic_routing)(void); int (*multi_timer_check)(int apic, int irq); - int (*apicid_to_node)(int logical_apicid); int (*cpu_present_to_apicid)(int mps_cpu); void (*apicid_to_cpu_present)(int phys_apicid, physid_mask_t *retmap); void (*setup_portio_remap)(void); @@ -367,6 +366,9 @@ struct apic { * won't be applied properly during early boot in this case. */ int (*x86_32_early_logical_apicid)(int cpu); + + /* determine CPU -> NUMA node mapping */ + int (*x86_32_numa_cpu_node)(int cpu); #endif }; @@ -539,7 +541,7 @@ static inline int default_phys_pkg_id(int cpuid_apic, int index_msb) return cpuid_apic >> index_msb; } -extern int default_apicid_to_node(int logical_apicid); +extern int default_x86_32_numa_cpu_node(int cpu); #endif diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 3127079628e..0f4f3c15231 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -2020,10 +2020,14 @@ void default_init_apic_ldr(void) } #ifdef CONFIG_X86_32 -int default_apicid_to_node(int logical_apicid) +int default_x86_32_numa_cpu_node(int cpu) { -#ifdef CONFIG_SMP - return apicid_2_node[hard_smp_processor_id()]; +#ifdef CONFIG_NUMA + int apicid = early_per_cpu(x86_cpu_to_apicid, cpu); + + if (apicid != BAD_APICID) + return apicid_2_node[apicid]; + return NUMA_NO_NODE; #else return 0; #endif diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c index 5a9d11a94b5..5652d31fe10 100644 --- a/arch/x86/kernel/apic/apic_flat_64.c +++ b/arch/x86/kernel/apic/apic_flat_64.c @@ -185,7 +185,6 @@ struct apic apic_flat = { .ioapic_phys_id_map = NULL, .setup_apic_routing = NULL, .multi_timer_check = NULL, - .apicid_to_node = NULL, .cpu_present_to_apicid = default_cpu_present_to_apicid, .apicid_to_cpu_present = NULL, .setup_portio_remap = NULL, @@ -336,7 +335,6 @@ struct apic apic_physflat = { .ioapic_phys_id_map = NULL, .setup_apic_routing = NULL, .multi_timer_check = NULL, - .apicid_to_node = NULL, .cpu_present_to_apicid = default_cpu_present_to_apicid, .apicid_to_cpu_present = NULL, .setup_portio_remap = NULL, diff --git a/arch/x86/kernel/apic/apic_noop.c b/arch/x86/kernel/apic/apic_noop.c index 0309c58d96b..f1baa2dc087 100644 --- a/arch/x86/kernel/apic/apic_noop.c +++ b/arch/x86/kernel/apic/apic_noop.c @@ -108,12 +108,6 @@ static void noop_vector_allocation_domain(int cpu, struct cpumask *retmask) cpumask_set_cpu(cpu, retmask); } -int noop_apicid_to_node(int logical_apicid) -{ - /* we're always on node 0 */ - return 0; -} - static u32 noop_apic_read(u32 reg) { WARN_ON_ONCE((cpu_has_apic && !disable_apic)); @@ -125,6 +119,14 @@ static void noop_apic_write(u32 reg, u32 v) WARN_ON_ONCE(cpu_has_apic && !disable_apic); } +#ifdef CONFIG_X86_32 +static int noop_x86_32_numa_cpu_node(int cpu) +{ + /* we're always on node 0 */ + return 0; +} +#endif + struct apic apic_noop = { .name = "noop", .probe = noop_probe, @@ -148,7 +150,6 @@ struct apic apic_noop = { .ioapic_phys_id_map = default_ioapic_phys_id_map, .setup_apic_routing = NULL, .multi_timer_check = NULL, - .apicid_to_node = noop_apicid_to_node, .cpu_present_to_apicid = default_cpu_present_to_apicid, .apicid_to_cpu_present = physid_set_mask_of_physid, @@ -194,5 +195,6 @@ struct apic apic_noop = { #ifdef CONFIG_X86_32 .x86_32_early_logical_apicid = noop_x86_32_early_logical_apicid, + .x86_32_numa_cpu_node = noop_x86_32_numa_cpu_node, #endif }; diff --git a/arch/x86/kernel/apic/bigsmp_32.c b/arch/x86/kernel/apic/bigsmp_32.c index bc7ed040bb0..541a2e43165 100644 --- a/arch/x86/kernel/apic/bigsmp_32.c +++ b/arch/x86/kernel/apic/bigsmp_32.c @@ -86,11 +86,6 @@ static void bigsmp_setup_apic_routing(void) nr_ioapics); } -static int bigsmp_apicid_to_node(int logical_apicid) -{ - return apicid_2_node[hard_smp_processor_id()]; -} - static int bigsmp_cpu_present_to_apicid(int mps_cpu) { if (mps_cpu < nr_cpu_ids) @@ -221,7 +216,6 @@ struct apic apic_bigsmp = { .ioapic_phys_id_map = bigsmp_ioapic_phys_id_map, .setup_apic_routing = bigsmp_setup_apic_routing, .multi_timer_check = NULL, - .apicid_to_node = bigsmp_apicid_to_node, .cpu_present_to_apicid = bigsmp_cpu_present_to_apicid, .apicid_to_cpu_present = physid_set_mask_of_physid, .setup_portio_remap = NULL, @@ -259,4 +253,5 @@ struct apic apic_bigsmp = { .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, .x86_32_early_logical_apicid = bigsmp_early_logical_apicid, + .x86_32_numa_cpu_node = default_x86_32_numa_cpu_node, }; diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c index 5c53d053ada..3e9de4854c5 100644 --- a/arch/x86/kernel/apic/es7000_32.c +++ b/arch/x86/kernel/apic/es7000_32.c @@ -510,12 +510,11 @@ static void es7000_setup_apic_routing(void) nr_ioapics, cpumask_bits(es7000_target_cpus())[0]); } -static int es7000_apicid_to_node(int logical_apicid) +static int es7000_numa_cpu_node(int cpu) { return 0; } - static int es7000_cpu_present_to_apicid(int mps_cpu) { if (!mps_cpu) @@ -649,7 +648,6 @@ struct apic __refdata apic_es7000_cluster = { .ioapic_phys_id_map = es7000_ioapic_phys_id_map, .setup_apic_routing = es7000_setup_apic_routing, .multi_timer_check = NULL, - .apicid_to_node = es7000_apicid_to_node, .cpu_present_to_apicid = es7000_cpu_present_to_apicid, .apicid_to_cpu_present = es7000_apicid_to_cpu_present, .setup_portio_remap = NULL, @@ -690,6 +688,7 @@ struct apic __refdata apic_es7000_cluster = { .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, .x86_32_early_logical_apicid = es7000_early_logical_apicid, + .x86_32_numa_cpu_node = es7000_numa_cpu_node, }; struct apic __refdata apic_es7000 = { @@ -715,7 +714,6 @@ struct apic __refdata apic_es7000 = { .ioapic_phys_id_map = es7000_ioapic_phys_id_map, .setup_apic_routing = es7000_setup_apic_routing, .multi_timer_check = NULL, - .apicid_to_node = es7000_apicid_to_node, .cpu_present_to_apicid = es7000_cpu_present_to_apicid, .apicid_to_cpu_present = es7000_apicid_to_cpu_present, .setup_portio_remap = NULL, @@ -754,4 +752,5 @@ struct apic __refdata apic_es7000 = { .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, .x86_32_early_logical_apicid = es7000_early_logical_apicid, + .x86_32_numa_cpu_node = es7000_numa_cpu_node, }; diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c index f1a8b120c49..6273eee5134 100644 --- a/arch/x86/kernel/apic/numaq_32.c +++ b/arch/x86/kernel/apic/numaq_32.c @@ -391,6 +391,15 @@ static inline int numaq_apicid_to_node(int logical_apicid) return logical_apicid >> 4; } +static int numaq_numa_cpu_node(int cpu) +{ + int logical_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu); + + if (logical_apicid != BAD_APICID) + return numaq_apicid_to_node(logical_apicid); + return NUMA_NO_NODE; +} + static void numaq_apicid_to_cpu_present(int logical_apicid, physid_mask_t *retmap) { int node = numaq_apicid_to_node(logical_apicid); @@ -501,7 +510,6 @@ struct apic __refdata apic_numaq = { .ioapic_phys_id_map = numaq_ioapic_phys_id_map, .setup_apic_routing = numaq_setup_apic_routing, .multi_timer_check = numaq_multi_timer_check, - .apicid_to_node = numaq_apicid_to_node, .cpu_present_to_apicid = numaq_cpu_present_to_apicid, .apicid_to_cpu_present = numaq_apicid_to_cpu_present, .setup_portio_remap = numaq_setup_portio_remap, @@ -541,4 +549,5 @@ struct apic __refdata apic_numaq = { .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, .x86_32_early_logical_apicid = noop_x86_32_early_logical_apicid, + .x86_32_numa_cpu_node = numaq_numa_cpu_node, }; diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c index 0f9a9ab49e7..fc84c7b6110 100644 --- a/arch/x86/kernel/apic/probe_32.c +++ b/arch/x86/kernel/apic/probe_32.c @@ -135,7 +135,6 @@ struct apic apic_default = { .ioapic_phys_id_map = default_ioapic_phys_id_map, .setup_apic_routing = setup_apic_flat_routing, .multi_timer_check = NULL, - .apicid_to_node = default_apicid_to_node, .cpu_present_to_apicid = default_cpu_present_to_apicid, .apicid_to_cpu_present = physid_set_mask_of_physid, .setup_portio_remap = NULL, @@ -173,6 +172,7 @@ struct apic apic_default = { .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, .x86_32_early_logical_apicid = default_x86_32_early_logical_apicid, + .x86_32_numa_cpu_node = default_x86_32_numa_cpu_node, }; extern struct apic apic_numaq; diff --git a/arch/x86/kernel/apic/summit_32.c b/arch/x86/kernel/apic/summit_32.c index 8c914732161..e4b8059b414 100644 --- a/arch/x86/kernel/apic/summit_32.c +++ b/arch/x86/kernel/apic/summit_32.c @@ -239,15 +239,6 @@ static void summit_setup_apic_routing(void) nr_ioapics); } -static int summit_apicid_to_node(int logical_apicid) -{ -#ifdef CONFIG_SMP - return apicid_2_node[hard_smp_processor_id()]; -#else - return 0; -#endif -} - static int summit_cpu_present_to_apicid(int mps_cpu) { if (mps_cpu < nr_cpu_ids) @@ -523,7 +514,6 @@ struct apic apic_summit = { .ioapic_phys_id_map = summit_ioapic_phys_id_map, .setup_apic_routing = summit_setup_apic_routing, .multi_timer_check = NULL, - .apicid_to_node = summit_apicid_to_node, .cpu_present_to_apicid = summit_cpu_present_to_apicid, .apicid_to_cpu_present = summit_apicid_to_cpu_present, .setup_portio_remap = NULL, @@ -561,4 +551,5 @@ struct apic apic_summit = { .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, .x86_32_early_logical_apicid = summit_early_logical_apicid, + .x86_32_numa_cpu_node = default_x86_32_numa_cpu_node, }; diff --git a/arch/x86/kernel/apic/x2apic_cluster.c b/arch/x86/kernel/apic/x2apic_cluster.c index badc1fdbea2..90949bbd566 100644 --- a/arch/x86/kernel/apic/x2apic_cluster.c +++ b/arch/x86/kernel/apic/x2apic_cluster.c @@ -206,7 +206,6 @@ struct apic apic_x2apic_cluster = { .ioapic_phys_id_map = NULL, .setup_apic_routing = NULL, .multi_timer_check = NULL, - .apicid_to_node = NULL, .cpu_present_to_apicid = default_cpu_present_to_apicid, .apicid_to_cpu_present = NULL, .setup_portio_remap = NULL, diff --git a/arch/x86/kernel/apic/x2apic_phys.c b/arch/x86/kernel/apic/x2apic_phys.c index f28bf4c5faf..c7e6d6645bf 100644 --- a/arch/x86/kernel/apic/x2apic_phys.c +++ b/arch/x86/kernel/apic/x2apic_phys.c @@ -195,7 +195,6 @@ struct apic apic_x2apic_phys = { .ioapic_phys_id_map = NULL, .setup_apic_routing = NULL, .multi_timer_check = NULL, - .apicid_to_node = NULL, .cpu_present_to_apicid = default_cpu_present_to_apicid, .apicid_to_cpu_present = NULL, .setup_portio_remap = NULL, diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index 60276206b72..3c289281394 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -338,7 +338,6 @@ struct apic __refdata apic_x2apic_uv_x = { .ioapic_phys_id_map = NULL, .setup_apic_routing = NULL, .multi_timer_check = NULL, - .apicid_to_node = NULL, .cpu_present_to_apicid = default_cpu_present_to_apicid, .apicid_to_cpu_present = NULL, .setup_portio_remap = NULL, diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index ca20f6bee3b..5319cdd5376 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -168,10 +168,9 @@ static void unmap_cpu_to_node(int cpu) static void map_cpu_to_logical_apicid(void) { int cpu = smp_processor_id(); - int logical_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu); int node; - node = apic->apicid_to_node(logical_apicid); + node = apic->x86_32_numa_cpu_node(cpu); if (!node_online(node)) node = first_online_node; -- cgit v1.2.3-18-g5258 From bbc9e2f452d9c4b166d1f9a78d941d80173312fe Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 23 Jan 2011 14:37:39 +0100 Subject: x86: Unify cpu/apicid <-> NUMA node mapping between 32 and 64bit The mapping between cpu/apicid and node is done via apicid_to_node[] on 64bit and apicid_2_node[] + apic->x86_32_numa_cpu_node() on 32bit. This difference makes it difficult to further unify 32 and 64bit NUMA handling. This patch unifies it by replacing both apicid_to_node[] and apicid_2_node[] with __apicid_to_node[] array, which is accessed by two accessors - set_apicid_to_node() and numa_cpu_node(). On 64bit, numa_cpu_node() always consults __apicid_to_node[] directly while 32bit goes through apic->numa_cpu_node() method to allow apic implementations to override it. srat_detect_node() for amd cpus contains workaround for broken NUMA configuration which assumes relationship between APIC ID, HT node ID and NUMA topology. Leave it to access __apicid_to_node[] directly as mapping through CPU might result in undesirable behavior change. The comment is reformatted and updated to note the ugliness. Signed-off-by: Tejun Heo Reviewed-by: Pekka Enberg Cc: eric.dumazet@gmail.com Cc: yinghai@kernel.org Cc: brgerst@gmail.com Cc: gorcunov@gmail.com Cc: shaohui.zheng@intel.com Cc: rientjes@google.com LKML-Reference: <1295789862-25482-14-git-send-email-tj@kernel.org> Signed-off-by: Ingo Molnar Cc: David Rientjes --- arch/x86/include/asm/mpspec.h | 1 - arch/x86/include/asm/numa.h | 28 +++++++++++++++++++++++++ arch/x86/include/asm/numa_32.h | 6 ++++++ arch/x86/include/asm/numa_64.h | 5 ++--- arch/x86/kernel/acpi/boot.c | 3 +-- arch/x86/kernel/apic/apic.c | 2 +- arch/x86/kernel/cpu/amd.c | 47 +++++++++++++++++++++++++++--------------- arch/x86/kernel/cpu/intel.c | 3 +-- arch/x86/kernel/smpboot.c | 6 +----- arch/x86/mm/amdtopology_64.c | 4 ++-- arch/x86/mm/numa.c | 6 +++++- arch/x86/mm/numa_32.c | 6 ++++++ arch/x86/mm/numa_64.c | 26 ++++++++++------------- arch/x86/mm/srat_32.c | 2 +- arch/x86/mm/srat_64.c | 12 +++++------ 15 files changed, 101 insertions(+), 56 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h index edc2a455b72..9c7d95f6174 100644 --- a/arch/x86/include/asm/mpspec.h +++ b/arch/x86/include/asm/mpspec.h @@ -25,7 +25,6 @@ extern int pic_mode; #define MAX_IRQ_SOURCES 256 extern unsigned int def_to_bigsmp; -extern u8 apicid_2_node[]; #ifdef CONFIG_X86_NUMAQ extern int mp_bus_id_to_node[MAX_MP_BUSSES]; diff --git a/arch/x86/include/asm/numa.h b/arch/x86/include/asm/numa.h index 27da400d313..5e01c768a57 100644 --- a/arch/x86/include/asm/numa.h +++ b/arch/x86/include/asm/numa.h @@ -1,5 +1,33 @@ +#ifndef _ASM_X86_NUMA_H +#define _ASM_X86_NUMA_H + +#include + +#ifdef CONFIG_NUMA +/* + * __apicid_to_node[] stores the raw mapping between physical apicid and + * node and is used to initialize cpu_to_node mapping. + * + * The mapping may be overridden by apic->numa_cpu_node() on 32bit and thus + * should be accessed by the accessors - set_apicid_to_node() and + * numa_cpu_node(). + */ +extern s16 __apicid_to_node[MAX_LOCAL_APIC]; + +static inline void set_apicid_to_node(int apicid, s16 node) +{ + __apicid_to_node[apicid] = node; +} +#else /* CONFIG_NUMA */ +static inline void set_apicid_to_node(int apicid, s16 node) +{ +} +#endif /* CONFIG_NUMA */ + #ifdef CONFIG_X86_32 # include "numa_32.h" #else # include "numa_64.h" #endif + +#endif /* _ASM_X86_NUMA_H */ diff --git a/arch/x86/include/asm/numa_32.h b/arch/x86/include/asm/numa_32.h index b0ef2b449a9..cdf8043d7a1 100644 --- a/arch/x86/include/asm/numa_32.h +++ b/arch/x86/include/asm/numa_32.h @@ -6,6 +6,12 @@ extern int numa_off; extern int pxm_to_nid(int pxm); extern void numa_remove_cpu(int cpu); +#ifdef CONFIG_NUMA +extern int __cpuinit numa_cpu_node(int apicid); +#else /* CONFIG_NUMA */ +static inline int numa_cpu_node(int cpu) { return NUMA_NO_NODE; } +#endif /* CONFIG_NUMA */ + #ifdef CONFIG_HIGHMEM extern void set_highmem_pages_init(void); #else diff --git a/arch/x86/include/asm/numa_64.h b/arch/x86/include/asm/numa_64.h index 0493be39607..4982a9c08c2 100644 --- a/arch/x86/include/asm/numa_64.h +++ b/arch/x86/include/asm/numa_64.h @@ -2,7 +2,6 @@ #define _ASM_X86_NUMA_64_H #include -#include struct bootnode { u64 start; @@ -17,8 +16,6 @@ extern int compute_hash_shift(struct bootnode *nodes, int numblks, extern void numa_init_array(void); extern int numa_off; -extern s16 apicid_to_node[MAX_LOCAL_APIC]; - extern unsigned long numa_free_all_bootmem(void); extern void setup_node_bootmem(int nodeid, unsigned long start, unsigned long end); @@ -32,6 +29,7 @@ extern void setup_node_bootmem(int nodeid, unsigned long start, #define NODE_MIN_SIZE (4*1024*1024) extern void __init init_cpu_to_node(void); +extern int __cpuinit numa_cpu_node(int cpu); extern void __cpuinit numa_set_node(int cpu, int node); extern void __cpuinit numa_clear_node(int cpu); extern void __cpuinit numa_add_cpu(int cpu); @@ -44,6 +42,7 @@ void numa_emu_cmdline(char *); #endif /* CONFIG_NUMA_EMU */ #else static inline void init_cpu_to_node(void) { } +static inline int numa_cpu_node(int cpu) { return NUMA_NO_NODE; } static inline void numa_set_node(int cpu, int node) { } static inline void numa_clear_node(int cpu) { } static inline void numa_add_cpu(int cpu, int node) { } diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index b3a71137983..a7bca59ec59 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -589,11 +589,10 @@ static void acpi_map_cpu2node(acpi_handle handle, int cpu, int physid) nid = acpi_get_node(handle); if (nid == -1 || !node_online(nid)) return; + set_apicid_to_node(physid, nid); #ifdef CONFIG_X86_64 - apicid_to_node[physid] = nid; numa_set_node(cpu, nid); #else /* CONFIG_X86_32 */ - apicid_2_node[physid] = nid; cpu_to_node_map[cpu] = nid; #endif diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 0f4f3c15231..4686ea59b7a 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -2026,7 +2026,7 @@ int default_x86_32_numa_cpu_node(int cpu) int apicid = early_per_cpu(x86_cpu_to_apicid, cpu); if (apicid != BAD_APICID) - return apicid_2_node[apicid]; + return __apicid_to_node[apicid]; return NUMA_NO_NODE; #else return 0; diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 7c7bedb83c5..3cce8f2bb2e 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -234,17 +234,21 @@ static void __cpuinit init_amd_k7(struct cpuinfo_x86 *c) #endif #if defined(CONFIG_NUMA) && defined(CONFIG_X86_64) +/* + * To workaround broken NUMA config. Read the comment in + * srat_detect_node(). + */ static int __cpuinit nearby_node(int apicid) { int i, node; for (i = apicid - 1; i >= 0; i--) { - node = apicid_to_node[i]; + node = __apicid_to_node[i]; if (node != NUMA_NO_NODE && node_online(node)) return node; } for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) { - node = apicid_to_node[i]; + node = __apicid_to_node[i]; if (node != NUMA_NO_NODE && node_online(node)) return node; } @@ -339,26 +343,35 @@ static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c) int node; unsigned apicid = c->apicid; - node = per_cpu(cpu_llc_id, cpu); + node = numa_cpu_node(cpu); + if (node == NUMA_NO_NODE) + node = per_cpu(cpu_llc_id, cpu); - if (apicid_to_node[apicid] != NUMA_NO_NODE) - node = apicid_to_node[apicid]; if (!node_online(node)) { - /* Two possibilities here: - - The CPU is missing memory and no node was created. - In that case try picking one from a nearby CPU - - The APIC IDs differ from the HyperTransport node IDs - which the K8 northbridge parsing fills in. - Assume they are all increased by a constant offset, - but in the same order as the HT nodeids. - If that doesn't result in a usable node fall back to the - path for the previous case. */ - + /* + * Two possibilities here: + * + * - The CPU is missing memory and no node was created. In + * that case try picking one from a nearby CPU. + * + * - The APIC IDs differ from the HyperTransport node IDs + * which the K8 northbridge parsing fills in. Assume + * they are all increased by a constant offset, but in + * the same order as the HT nodeids. If that doesn't + * result in a usable node fall back to the path for the + * previous case. + * + * This workaround operates directly on the mapping between + * APIC ID and NUMA node, assuming certain relationship + * between APIC ID, HT node ID and NUMA topology. As going + * through CPU mapping may alter the outcome, directly + * access __apicid_to_node[]. + */ int ht_nodeid = c->initial_apicid; if (ht_nodeid >= 0 && - apicid_to_node[ht_nodeid] != NUMA_NO_NODE) - node = apicid_to_node[ht_nodeid]; + __apicid_to_node[ht_nodeid] != NUMA_NO_NODE) + node = __apicid_to_node[ht_nodeid]; /* Pick a nearby node */ if (!node_online(node)) node = nearby_node(apicid); diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c index d16c2c53d6b..6052004bf4f 100644 --- a/arch/x86/kernel/cpu/intel.c +++ b/arch/x86/kernel/cpu/intel.c @@ -279,11 +279,10 @@ static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c) #if defined(CONFIG_NUMA) && defined(CONFIG_X86_64) unsigned node; int cpu = smp_processor_id(); - int apicid = cpu_has_apic ? hard_smp_processor_id() : c->apicid; /* Don't do the funky fallback heuristics the AMD version employs for now. */ - node = apicid_to_node[apicid]; + node = numa_cpu_node(cpu); if (node == NUMA_NO_NODE || !node_online(node)) { /* reuse the value from init_cpu_to_node() */ node = cpu_to_node(cpu); diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 5319cdd5376..b7cfce535cb 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -71,10 +71,6 @@ #include #include -#ifdef CONFIG_X86_32 -u8 apicid_2_node[MAX_LOCAL_APIC]; -#endif - /* State of each CPU */ DEFINE_PER_CPU(int, cpu_state) = { 0 }; @@ -170,7 +166,7 @@ static void map_cpu_to_logical_apicid(void) int cpu = smp_processor_id(); int node; - node = apic->x86_32_numa_cpu_node(cpu); + node = numa_cpu_node(cpu); if (!node_online(node)) node = first_online_node; diff --git a/arch/x86/mm/amdtopology_64.c b/arch/x86/mm/amdtopology_64.c index f21962c435e..c7fae38c408 100644 --- a/arch/x86/mm/amdtopology_64.c +++ b/arch/x86/mm/amdtopology_64.c @@ -247,7 +247,7 @@ void __init amd_fake_nodes(const struct bootnode *nodes, int nr_nodes) __acpi_map_pxm_to_node(nid, i); #endif } - memcpy(apicid_to_node, fake_apicid_to_node, sizeof(apicid_to_node)); + memcpy(__apicid_to_node, fake_apicid_to_node, sizeof(__apicid_to_node)); } #endif /* CONFIG_NUMA_EMU */ @@ -285,7 +285,7 @@ int __init amd_scan_nodes(void) nodes[i].start >> PAGE_SHIFT, nodes[i].end >> PAGE_SHIFT); for (j = apicid_base; j < cores + apicid_base; j++) - apicid_to_node[(i << bits) + j] = i; + set_apicid_to_node((i << bits) + j, i); setup_node_bootmem(i, nodes[i].start, nodes[i].end); } diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c index ebf6d7887a3..480b3571c8b 100644 --- a/arch/x86/mm/numa.c +++ b/arch/x86/mm/numa.c @@ -26,8 +26,12 @@ static __init int numa_setup(char *opt) early_param("numa", numa_setup); /* - * Which logical CPUs are on which nodes + * apicid, cpu, node mappings */ +s16 __apicid_to_node[MAX_LOCAL_APIC] __cpuinitdata = { + [0 ... MAX_LOCAL_APIC-1] = NUMA_NO_NODE +}; + cpumask_var_t node_to_cpumask_map[MAX_NUMNODES]; EXPORT_SYMBOL(node_to_cpumask_map); diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c index 84a3e4c9f27..8d91d227be0 100644 --- a/arch/x86/mm/numa_32.c +++ b/arch/x86/mm/numa_32.c @@ -110,6 +110,12 @@ void set_pmd_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags); static unsigned long kva_start_pfn; static unsigned long kva_pages; + +int __cpuinit numa_cpu_node(int cpu) +{ + return apic->x86_32_numa_cpu_node(cpu); +} + /* * FLAT - support for basic PC memory model with discontig enabled, essentially * a single node with all available processors in it with a flat diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index 95ea1551eeb..1e1026f61a5 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -26,10 +26,6 @@ EXPORT_SYMBOL(node_data); struct memnode memnode; -s16 apicid_to_node[MAX_LOCAL_APIC] __cpuinitdata = { - [0 ... MAX_LOCAL_APIC-1] = NUMA_NO_NODE -}; - static unsigned long __initdata nodemap_addr; static unsigned long __initdata nodemap_size; @@ -716,12 +712,8 @@ void __init init_cpu_to_node(void) BUG_ON(cpu_to_apicid == NULL); for_each_possible_cpu(cpu) { - int node; - u16 apicid = cpu_to_apicid[cpu]; + int node = numa_cpu_node(cpu); - if (apicid == BAD_APICID) - continue; - node = apicid_to_node[apicid]; if (node == NUMA_NO_NODE) continue; if (!node_online(node)) @@ -731,6 +723,14 @@ void __init init_cpu_to_node(void) } #endif +int __cpuinit numa_cpu_node(int cpu) +{ + int apicid = early_per_cpu(x86_cpu_to_apicid, cpu); + + if (apicid != BAD_APICID) + return __apicid_to_node[apicid]; + return NUMA_NO_NODE; +} void __cpuinit numa_set_node(int cpu, int node) { @@ -776,13 +776,9 @@ void __cpuinit numa_remove_cpu(int cpu) void __cpuinit numa_add_cpu(int cpu) { unsigned long addr; - u16 apicid; - int physnid; - int nid = NUMA_NO_NODE; + int physnid, nid; - apicid = early_per_cpu(x86_cpu_to_apicid, cpu); - if (apicid != BAD_APICID) - nid = apicid_to_node[apicid]; + nid = numa_cpu_node(cpu); if (nid == NUMA_NO_NODE) nid = early_cpu_to_node(cpu); BUG_ON(nid == NUMA_NO_NODE || !node_online(nid)); diff --git a/arch/x86/mm/srat_32.c b/arch/x86/mm/srat_32.c index 6027a481000..48651c6f657 100644 --- a/arch/x86/mm/srat_32.c +++ b/arch/x86/mm/srat_32.c @@ -255,7 +255,7 @@ int __init get_memcfg_from_srat(void) num_memory_chunks); for (i = 0; i < MAX_LOCAL_APIC; i++) - apicid_2_node[i] = pxm_to_node(apicid_to_pxm[i]); + set_apicid_to_node(i, pxm_to_node(apicid_to_pxm[i])); for (j = 0; j < num_memory_chunks; j++){ struct node_memory_chunk_s * chunk = &node_memory_chunk[j]; diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index 603d285d1da..9a97261a241 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -79,7 +79,7 @@ static __init void bad_srat(void) printk(KERN_ERR "SRAT: SRAT not used.\n"); acpi_numa = -1; for (i = 0; i < MAX_LOCAL_APIC; i++) - apicid_to_node[i] = NUMA_NO_NODE; + set_apicid_to_node(i, NUMA_NO_NODE); for (i = 0; i < MAX_NUMNODES; i++) { nodes[i].start = nodes[i].end = 0; nodes_add[i].start = nodes_add[i].end = 0; @@ -138,7 +138,7 @@ acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa) printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%04x -> Node %u skipped apicid that is too big\n", pxm, apic_id, node); return; } - apicid_to_node[apic_id] = node; + set_apicid_to_node(apic_id, node); node_set(node, cpu_nodes_parsed); acpi_numa = 1; printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%04x -> Node %u\n", @@ -178,7 +178,7 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa) return; } - apicid_to_node[apic_id] = node; + set_apicid_to_node(apic_id, node); node_set(node, cpu_nodes_parsed); acpi_numa = 1; printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%02x -> Node %u\n", @@ -521,7 +521,7 @@ void __init acpi_fake_nodes(const struct bootnode *fake_nodes, int num_nodes) * node, it must now point to the fake node ID. */ for (j = 0; j < MAX_LOCAL_APIC; j++) - if (apicid_to_node[j] == nid && + if (__apicid_to_node[j] == nid && fake_apicid_to_node[j] == NUMA_NO_NODE) fake_apicid_to_node[j] = i; } @@ -532,13 +532,13 @@ void __init acpi_fake_nodes(const struct bootnode *fake_nodes, int num_nodes) * value. */ for (i = 0; i < MAX_LOCAL_APIC; i++) - if (apicid_to_node[i] != NUMA_NO_NODE && + if (__apicid_to_node[i] != NUMA_NO_NODE && fake_apicid_to_node[i] == NUMA_NO_NODE) fake_apicid_to_node[i] = 0; for (i = 0; i < num_nodes; i++) __acpi_map_pxm_to_node(fake_node_to_pxm_map[i], i); - memcpy(apicid_to_node, fake_apicid_to_node, sizeof(apicid_to_node)); + memcpy(__apicid_to_node, fake_apicid_to_node, sizeof(__apicid_to_node)); nodes_clear(nodes_parsed); for (i = 0; i < num_nodes; i++) -- cgit v1.2.3-18-g5258 From 645a79195f66eb68ef3ab2b21d9829ac3aa085a9 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 23 Jan 2011 14:37:40 +0100 Subject: x86: Unify CPU -> NUMA node mapping between 32 and 64bit Unlike 64bit, 32bit has been using its own cpu_to_node_map[] for CPU -> NUMA node mapping. Replace it with early_percpu variable x86_cpu_to_node_map and share the mapping code with 64bit. * USE_PERCPU_NUMA_NODE_ID is now enabled for 32bit too. * x86_cpu_to_node_map and numa_set/clear_node() are moved from numa_64 to numa. For now, on 32bit, x86_cpu_to_node_map is initialized with 0 instead of NUMA_NO_NODE. This is to avoid introducing unexpected behavior change and will be updated once init path is unified. * srat_detect_node() is now enabled for x86_32 too. It calls numa_set_node() and initializes the mapping making explicit cpu_to_node_map[] updates from map/unmap_cpu_to_node() unnecessary. Signed-off-by: Tejun Heo Cc: eric.dumazet@gmail.com Cc: yinghai@kernel.org Cc: brgerst@gmail.com Cc: gorcunov@gmail.com Cc: penberg@kernel.org Cc: shaohui.zheng@intel.com Cc: rientjes@google.com LKML-Reference: <1295789862-25482-15-git-send-email-tj@kernel.org> Signed-off-by: Ingo Molnar Cc: David Rientjes --- arch/x86/Kconfig | 2 +- arch/x86/include/asm/numa.h | 8 +++++ arch/x86/include/asm/numa_64.h | 4 --- arch/x86/include/asm/topology.h | 17 ---------- arch/x86/kernel/acpi/boot.c | 5 --- arch/x86/kernel/cpu/amd.c | 4 +-- arch/x86/kernel/cpu/intel.c | 2 +- arch/x86/kernel/setup_percpu.c | 4 +-- arch/x86/kernel/smpboot.c | 6 ---- arch/x86/mm/numa.c | 72 ++++++++++++++++++++++++++++++++++++++++- arch/x86/mm/numa_64.c | 65 ------------------------------------- 11 files changed, 85 insertions(+), 104 deletions(-) (limited to 'arch') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index d5ed94d30aa..95c36c47476 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1705,7 +1705,7 @@ config HAVE_ARCH_EARLY_PFN_TO_NID depends on NUMA config USE_PERCPU_NUMA_NODE_ID - def_bool X86_64 + def_bool y depends on NUMA menu "Power management and ACPI options" diff --git a/arch/x86/include/asm/numa.h b/arch/x86/include/asm/numa.h index 5e01c768a57..2b21fff9f65 100644 --- a/arch/x86/include/asm/numa.h +++ b/arch/x86/include/asm/numa.h @@ -30,4 +30,12 @@ static inline void set_apicid_to_node(int apicid, s16 node) # include "numa_64.h" #endif +#ifdef CONFIG_NUMA +extern void __cpuinit numa_set_node(int cpu, int node); +extern void __cpuinit numa_clear_node(int cpu); +#else /* CONFIG_NUMA */ +static inline void numa_set_node(int cpu, int node) { } +static inline void numa_clear_node(int cpu) { } +#endif /* CONFIG_NUMA */ + #endif /* _ASM_X86_NUMA_H */ diff --git a/arch/x86/include/asm/numa_64.h b/arch/x86/include/asm/numa_64.h index 4982a9c08c2..6ead9f361bd 100644 --- a/arch/x86/include/asm/numa_64.h +++ b/arch/x86/include/asm/numa_64.h @@ -30,8 +30,6 @@ extern void setup_node_bootmem(int nodeid, unsigned long start, extern void __init init_cpu_to_node(void); extern int __cpuinit numa_cpu_node(int cpu); -extern void __cpuinit numa_set_node(int cpu, int node); -extern void __cpuinit numa_clear_node(int cpu); extern void __cpuinit numa_add_cpu(int cpu); extern void __cpuinit numa_remove_cpu(int cpu); @@ -43,8 +41,6 @@ void numa_emu_cmdline(char *); #else static inline void init_cpu_to_node(void) { } static inline int numa_cpu_node(int cpu) { return NUMA_NO_NODE; } -static inline void numa_set_node(int cpu, int node) { } -static inline void numa_clear_node(int cpu) { } static inline void numa_add_cpu(int cpu, int node) { } static inline void numa_remove_cpu(int cpu) { } #endif diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h index 21899cc31e5..b101c17861f 100644 --- a/arch/x86/include/asm/topology.h +++ b/arch/x86/include/asm/topology.h @@ -47,21 +47,6 @@ #include -#ifdef CONFIG_X86_32 - -/* Mappings between logical cpu number and node number */ -extern int cpu_to_node_map[]; - -/* Returns the number of the node containing CPU 'cpu' */ -static inline int __cpu_to_node(int cpu) -{ - return cpu_to_node_map[cpu]; -} -#define early_cpu_to_node __cpu_to_node -#define cpu_to_node __cpu_to_node - -#else /* CONFIG_X86_64 */ - /* Mappings between logical cpu number and node number */ DECLARE_EARLY_PER_CPU(int, x86_cpu_to_node_map); @@ -84,8 +69,6 @@ static inline int early_cpu_to_node(int cpu) #endif /* !CONFIG_DEBUG_PER_CPU_MAPS */ -#endif /* CONFIG_X86_64 */ - /* Mappings between node number and cpus on that node. */ extern cpumask_var_t node_to_cpumask_map[MAX_NUMNODES]; diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index a7bca59ec59..a2c51217539 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -590,12 +590,7 @@ static void acpi_map_cpu2node(acpi_handle handle, int cpu, int physid) if (nid == -1 || !node_online(nid)) return; set_apicid_to_node(physid, nid); -#ifdef CONFIG_X86_64 numa_set_node(cpu, nid); -#else /* CONFIG_X86_32 */ - cpu_to_node_map[cpu] = nid; -#endif - #endif } diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 3cce8f2bb2e..77858fd6462 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -233,7 +233,7 @@ static void __cpuinit init_amd_k7(struct cpuinfo_x86 *c) } #endif -#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64) +#ifdef CONFIG_NUMA /* * To workaround broken NUMA config. Read the comment in * srat_detect_node(). @@ -338,7 +338,7 @@ EXPORT_SYMBOL_GPL(amd_get_nb_id); static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c) { -#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64) +#ifdef CONFIG_NUMA int cpu = smp_processor_id(); int node; unsigned apicid = c->apicid; diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c index 6052004bf4f..df86bc8c859 100644 --- a/arch/x86/kernel/cpu/intel.c +++ b/arch/x86/kernel/cpu/intel.c @@ -276,7 +276,7 @@ static void __cpuinit intel_workarounds(struct cpuinfo_x86 *c) static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c) { -#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64) +#ifdef CONFIG_NUMA unsigned node; int cpu = smp_processor_id(); diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c index b5147f00f0e..71f4727da37 100644 --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -233,6 +233,7 @@ void __init setup_per_cpu_areas(void) per_cpu(irq_stack_ptr, cpu) = per_cpu(irq_stack_union.irq_stack, cpu) + IRQ_STACK_SIZE - 64; +#endif #ifdef CONFIG_NUMA per_cpu(x86_cpu_to_node_map, cpu) = early_per_cpu_map(x86_cpu_to_node_map, cpu); @@ -245,7 +246,6 @@ void __init setup_per_cpu_areas(void) * So set them all (boot cpu and all APs). */ set_cpu_numa_node(cpu, early_cpu_to_node(cpu)); -#endif #endif /* * Up to this point, the boot CPU has been using .init.data @@ -263,7 +263,7 @@ void __init setup_per_cpu_areas(void) #ifdef CONFIG_X86_32 early_per_cpu_ptr(x86_cpu_to_logical_apicid) = NULL; #endif -#if defined(CONFIG_X86_64) && defined(CONFIG_NUMA) +#ifdef CONFIG_NUMA early_per_cpu_ptr(x86_cpu_to_node_map) = NULL; #endif diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index b7cfce535cb..2c203822424 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -133,16 +133,11 @@ EXPORT_PER_CPU_SYMBOL(cpu_info); atomic_t init_deasserted; #if defined(CONFIG_NUMA) && defined(CONFIG_X86_32) -/* which node each logical CPU is on */ -int cpu_to_node_map[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = 0 }; -EXPORT_SYMBOL(cpu_to_node_map); - /* set up a mapping between cpu and node. */ static void map_cpu_to_node(int cpu, int node) { printk(KERN_INFO "Mapping cpu %d to node %d\n", cpu, node); cpumask_set_cpu(cpu, node_to_cpumask_map[node]); - cpu_to_node_map[cpu] = node; } /* undo a mapping between cpu and node. */ @@ -153,7 +148,6 @@ static void unmap_cpu_to_node(int cpu) printk(KERN_INFO "Unmapping cpu %d from all nodes\n", cpu); for (node = 0; node < MAX_NUMNODES; node++) cpumask_clear_cpu(cpu, node_to_cpumask_map[node]); - cpu_to_node_map[cpu] = 0; } #else /* !(CONFIG_NUMA && CONFIG_X86_32) */ #define map_cpu_to_node(cpu, node) ({}) diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c index 480b3571c8b..187810be3d6 100644 --- a/arch/x86/mm/numa.c +++ b/arch/x86/mm/numa.c @@ -35,6 +35,44 @@ s16 __apicid_to_node[MAX_LOCAL_APIC] __cpuinitdata = { cpumask_var_t node_to_cpumask_map[MAX_NUMNODES]; EXPORT_SYMBOL(node_to_cpumask_map); +/* + * Map cpu index to node index + */ +#ifdef CONFIG_X86_32 +DEFINE_EARLY_PER_CPU(int, x86_cpu_to_node_map, 0); +#else +DEFINE_EARLY_PER_CPU(int, x86_cpu_to_node_map, NUMA_NO_NODE); +#endif +EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_node_map); + +void __cpuinit numa_set_node(int cpu, int node) +{ + int *cpu_to_node_map = early_per_cpu_ptr(x86_cpu_to_node_map); + + /* early setting, no percpu area yet */ + if (cpu_to_node_map) { + cpu_to_node_map[cpu] = node; + return; + } + +#ifdef CONFIG_DEBUG_PER_CPU_MAPS + if (cpu >= nr_cpu_ids || !cpu_possible(cpu)) { + printk(KERN_ERR "numa_set_node: invalid cpu# (%d)\n", cpu); + dump_stack(); + return; + } +#endif + per_cpu(x86_cpu_to_node_map, cpu) = node; + + if (node != NUMA_NO_NODE) + set_cpu_numa_node(cpu, node); +} + +void __cpuinit numa_clear_node(int cpu) +{ + numa_set_node(cpu, NUMA_NO_NODE); +} + /* * Allocate node_to_cpumask_map based on number of available nodes * Requires node_possible_map to be valid. @@ -62,6 +100,37 @@ void __init setup_node_to_cpumask_map(void) } #ifdef CONFIG_DEBUG_PER_CPU_MAPS + +int __cpu_to_node(int cpu) +{ + if (early_per_cpu_ptr(x86_cpu_to_node_map)) { + printk(KERN_WARNING + "cpu_to_node(%d): usage too early!\n", cpu); + dump_stack(); + return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu]; + } + return per_cpu(x86_cpu_to_node_map, cpu); +} +EXPORT_SYMBOL(__cpu_to_node); + +/* + * Same function as cpu_to_node() but used if called before the + * per_cpu areas are setup. + */ +int early_cpu_to_node(int cpu) +{ + if (early_per_cpu_ptr(x86_cpu_to_node_map)) + return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu]; + + if (!cpu_possible(cpu)) { + printk(KERN_WARNING + "early_cpu_to_node(%d): no per_cpu area!\n", cpu); + dump_stack(); + return NUMA_NO_NODE; + } + return per_cpu(x86_cpu_to_node_map, cpu); +} + /* * Returns a pointer to the bitmask of CPUs on Node 'node'. */ @@ -84,4 +153,5 @@ const struct cpumask *cpumask_of_node(int node) return node_to_cpumask_map[node]; } EXPORT_SYMBOL(cpumask_of_node); -#endif + +#endif /* CONFIG_DEBUG_PER_CPU_MAPS */ diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index 1e1026f61a5..f5459400644 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -29,12 +29,6 @@ struct memnode memnode; static unsigned long __initdata nodemap_addr; static unsigned long __initdata nodemap_size; -/* - * Map cpu index to node index - */ -DEFINE_EARLY_PER_CPU(int, x86_cpu_to_node_map, NUMA_NO_NODE); -EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_node_map); - /* * Given a shift value, try to populate memnodemap[] * Returns : @@ -732,34 +726,6 @@ int __cpuinit numa_cpu_node(int cpu) return NUMA_NO_NODE; } -void __cpuinit numa_set_node(int cpu, int node) -{ - int *cpu_to_node_map = early_per_cpu_ptr(x86_cpu_to_node_map); - - /* early setting, no percpu area yet */ - if (cpu_to_node_map) { - cpu_to_node_map[cpu] = node; - return; - } - -#ifdef CONFIG_DEBUG_PER_CPU_MAPS - if (cpu >= nr_cpu_ids || !cpu_possible(cpu)) { - printk(KERN_ERR "numa_set_node: invalid cpu# (%d)\n", cpu); - dump_stack(); - return; - } -#endif - per_cpu(x86_cpu_to_node_map, cpu) = node; - - if (node != NUMA_NO_NODE) - set_cpu_numa_node(cpu, node); -} - -void __cpuinit numa_clear_node(int cpu) -{ - numa_set_node(cpu, NUMA_NO_NODE); -} - #ifndef CONFIG_DEBUG_PER_CPU_MAPS #ifndef CONFIG_NUMA_EMU @@ -887,37 +853,6 @@ void __cpuinit numa_remove_cpu(int cpu) { numa_set_cpumask(cpu, 0); } - -int __cpu_to_node(int cpu) -{ - if (early_per_cpu_ptr(x86_cpu_to_node_map)) { - printk(KERN_WARNING - "cpu_to_node(%d): usage too early!\n", cpu); - dump_stack(); - return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu]; - } - return per_cpu(x86_cpu_to_node_map, cpu); -} -EXPORT_SYMBOL(__cpu_to_node); - -/* - * Same function as cpu_to_node() but used if called before the - * per_cpu areas are setup. - */ -int early_cpu_to_node(int cpu) -{ - if (early_per_cpu_ptr(x86_cpu_to_node_map)) - return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu]; - - if (!cpu_possible(cpu)) { - printk(KERN_WARNING - "early_cpu_to_node(%d): no per_cpu area!\n", cpu); - dump_stack(); - return NUMA_NO_NODE; - } - return per_cpu(x86_cpu_to_node_map, cpu); -} - /* * --------- end of debug versions of the numa functions --------- */ -- cgit v1.2.3-18-g5258 From de2d9445f1627830ed2ebd00ee9d851986c940b5 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 23 Jan 2011 14:37:41 +0100 Subject: x86: Unify node_to_cpumask_map handling between 32 and 64bit x86_32 has been managing node_to_cpumask_map explicitly from map_cpu_to_node() and friends in a rather ugly way. With previous changes, it's now possible to share the code with 64bit. * When CONFIG_NUMA_EMU is disabled, numa_add/remove_cpu() are implemented in numa.c and shared by 32 and 64bit. CONFIG_NUMA_EMU versions still live in numa_64.c. NUMA_EMU's dependency on 64bit is planned to be removed and the above should go away together. * identify_cpu() now calls numa_add_cpu() for 32bit too. This makes the explicit mask management from map_cpu_to_node() unnecessary. * The whole x86_32 specific map_cpu_to_node() chunk is no longer necessary. Dropped. Signed-off-by: Tejun Heo Reviewed-by: Pekka Enberg Cc: eric.dumazet@gmail.com Cc: yinghai@kernel.org Cc: brgerst@gmail.com Cc: gorcunov@gmail.com Cc: shaohui.zheng@intel.com Cc: rientjes@google.com LKML-Reference: <1295789862-25482-16-git-send-email-tj@kernel.org> Signed-off-by: Ingo Molnar Cc: David Rientjes Cc: Shaohui Zheng --- arch/x86/include/asm/numa.h | 9 +++++ arch/x86/include/asm/numa_32.h | 1 - arch/x86/include/asm/numa_64.h | 4 --- arch/x86/kernel/cpu/common.c | 2 +- arch/x86/kernel/smpboot.c | 47 -------------------------- arch/x86/mm/numa.c | 64 +++++++++++++++++++++++++++++++++-- arch/x86/mm/numa_64.c | 75 +++++++++--------------------------------- 7 files changed, 87 insertions(+), 115 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/numa.h b/arch/x86/include/asm/numa.h index 2b21fff9f65..d3964b28b12 100644 --- a/arch/x86/include/asm/numa.h +++ b/arch/x86/include/asm/numa.h @@ -1,6 +1,7 @@ #ifndef _ASM_X86_NUMA_H #define _ASM_X86_NUMA_H +#include #include #ifdef CONFIG_NUMA @@ -33,9 +34,17 @@ static inline void set_apicid_to_node(int apicid, s16 node) #ifdef CONFIG_NUMA extern void __cpuinit numa_set_node(int cpu, int node); extern void __cpuinit numa_clear_node(int cpu); +extern void __cpuinit numa_add_cpu(int cpu); +extern void __cpuinit numa_remove_cpu(int cpu); #else /* CONFIG_NUMA */ static inline void numa_set_node(int cpu, int node) { } static inline void numa_clear_node(int cpu) { } +static inline void numa_add_cpu(int cpu) { } +static inline void numa_remove_cpu(int cpu) { } #endif /* CONFIG_NUMA */ +#ifdef CONFIG_DEBUG_PER_CPU_MAPS +struct cpumask __cpuinit *debug_cpumask_set_cpu(int cpu, int enable); +#endif + #endif /* _ASM_X86_NUMA_H */ diff --git a/arch/x86/include/asm/numa_32.h b/arch/x86/include/asm/numa_32.h index cdf8043d7a1..bc66031afa1 100644 --- a/arch/x86/include/asm/numa_32.h +++ b/arch/x86/include/asm/numa_32.h @@ -4,7 +4,6 @@ extern int numa_off; extern int pxm_to_nid(int pxm); -extern void numa_remove_cpu(int cpu); #ifdef CONFIG_NUMA extern int __cpuinit numa_cpu_node(int apicid); diff --git a/arch/x86/include/asm/numa_64.h b/arch/x86/include/asm/numa_64.h index 6ead9f361bd..123f1856101 100644 --- a/arch/x86/include/asm/numa_64.h +++ b/arch/x86/include/asm/numa_64.h @@ -30,8 +30,6 @@ extern void setup_node_bootmem(int nodeid, unsigned long start, extern void __init init_cpu_to_node(void); extern int __cpuinit numa_cpu_node(int cpu); -extern void __cpuinit numa_add_cpu(int cpu); -extern void __cpuinit numa_remove_cpu(int cpu); #ifdef CONFIG_NUMA_EMU #define FAKE_NODE_MIN_SIZE ((u64)32 << 20) @@ -41,8 +39,6 @@ void numa_emu_cmdline(char *); #else static inline void init_cpu_to_node(void) { } static inline int numa_cpu_node(int cpu) { return NUMA_NO_NODE; } -static inline void numa_add_cpu(int cpu, int node) { } -static inline void numa_remove_cpu(int cpu) { } #endif #endif /* _ASM_X86_NUMA_64_H */ diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 1d59834396b..a2559c3ed50 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -869,7 +869,7 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c) select_idle_routine(c); -#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64) +#ifdef CONFIG_NUMA numa_add_cpu(smp_processor_id()); #endif } diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 2c203822424..522b2173888 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -132,49 +132,6 @@ EXPORT_PER_CPU_SYMBOL(cpu_info); atomic_t init_deasserted; -#if defined(CONFIG_NUMA) && defined(CONFIG_X86_32) -/* set up a mapping between cpu and node. */ -static void map_cpu_to_node(int cpu, int node) -{ - printk(KERN_INFO "Mapping cpu %d to node %d\n", cpu, node); - cpumask_set_cpu(cpu, node_to_cpumask_map[node]); -} - -/* undo a mapping between cpu and node. */ -static void unmap_cpu_to_node(int cpu) -{ - int node; - - printk(KERN_INFO "Unmapping cpu %d from all nodes\n", cpu); - for (node = 0; node < MAX_NUMNODES; node++) - cpumask_clear_cpu(cpu, node_to_cpumask_map[node]); -} -#else /* !(CONFIG_NUMA && CONFIG_X86_32) */ -#define map_cpu_to_node(cpu, node) ({}) -#define unmap_cpu_to_node(cpu) ({}) -#endif - -#ifdef CONFIG_X86_32 -static void map_cpu_to_logical_apicid(void) -{ - int cpu = smp_processor_id(); - int node; - - node = numa_cpu_node(cpu); - if (!node_online(node)) - node = first_online_node; - - map_cpu_to_node(cpu, node); -} - -void numa_remove_cpu(int cpu) -{ - unmap_cpu_to_node(cpu); -} -#else -#define map_cpu_to_logical_apicid() do {} while (0) -#endif - /* * Report back to the Boot Processor. * Running on AP. @@ -242,7 +199,6 @@ static void __cpuinit smp_callin(void) apic->smp_callin_clear_local_apic(); setup_local_APIC(); end_local_APIC_setup(); - map_cpu_to_logical_apicid(); /* * Need to setup vector mappings before we enable interrupts. @@ -943,7 +899,6 @@ static __init void disable_smp(void) physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map); else physid_set_mask_of_physid(0, &phys_cpu_present_map); - map_cpu_to_logical_apicid(); cpumask_set_cpu(0, cpu_sibling_mask(0)); cpumask_set_cpu(0, cpu_core_mask(0)); } @@ -1120,8 +1075,6 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus) end_local_APIC_setup(); - map_cpu_to_logical_apicid(); - if (apic->setup_portio_remap) apic->setup_portio_remap(); diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c index 187810be3d6..75abecb614c 100644 --- a/arch/x86/mm/numa.c +++ b/arch/x86/mm/numa.c @@ -99,7 +99,21 @@ void __init setup_node_to_cpumask_map(void) pr_debug("Node to cpumask map for %d nodes\n", nr_node_ids); } -#ifdef CONFIG_DEBUG_PER_CPU_MAPS +#ifndef CONFIG_DEBUG_PER_CPU_MAPS + +# ifndef CONFIG_NUMA_EMU +void __cpuinit numa_add_cpu(int cpu) +{ + cpumask_set_cpu(cpu, node_to_cpumask_map[early_cpu_to_node(cpu)]); +} + +void __cpuinit numa_remove_cpu(int cpu) +{ + cpumask_clear_cpu(cpu, node_to_cpumask_map[early_cpu_to_node(cpu)]); +} +# endif /* !CONFIG_NUMA_EMU */ + +#else /* !CONFIG_DEBUG_PER_CPU_MAPS */ int __cpu_to_node(int cpu) { @@ -131,6 +145,52 @@ int early_cpu_to_node(int cpu) return per_cpu(x86_cpu_to_node_map, cpu); } +struct cpumask __cpuinit *debug_cpumask_set_cpu(int cpu, int enable) +{ + int node = early_cpu_to_node(cpu); + struct cpumask *mask; + char buf[64]; + + mask = node_to_cpumask_map[node]; + if (!mask) { + pr_err("node_to_cpumask_map[%i] NULL\n", node); + dump_stack(); + return NULL; + } + + cpulist_scnprintf(buf, sizeof(buf), mask); + printk(KERN_DEBUG "%s cpu %d node %d: mask now %s\n", + enable ? "numa_add_cpu" : "numa_remove_cpu", + cpu, node, buf); + return mask; +} + +# ifndef CONFIG_NUMA_EMU +static void __cpuinit numa_set_cpumask(int cpu, int enable) +{ + struct cpumask *mask; + + mask = debug_cpumask_set_cpu(cpu, enable); + if (!mask) + return; + + if (enable) + cpumask_set_cpu(cpu, mask); + else + cpumask_clear_cpu(cpu, mask); +} + +void __cpuinit numa_add_cpu(int cpu) +{ + numa_set_cpumask(cpu, 1); +} + +void __cpuinit numa_remove_cpu(int cpu) +{ + numa_set_cpumask(cpu, 0); +} +# endif /* !CONFIG_NUMA_EMU */ + /* * Returns a pointer to the bitmask of CPUs on Node 'node'. */ @@ -154,4 +214,4 @@ const struct cpumask *cpumask_of_node(int node) } EXPORT_SYMBOL(cpumask_of_node); -#endif /* CONFIG_DEBUG_PER_CPU_MAPS */ +#endif /* !CONFIG_DEBUG_PER_CPU_MAPS */ diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index f5459400644..14664f58a75 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -726,19 +726,18 @@ int __cpuinit numa_cpu_node(int cpu) return NUMA_NO_NODE; } -#ifndef CONFIG_DEBUG_PER_CPU_MAPS - -#ifndef CONFIG_NUMA_EMU -void __cpuinit numa_add_cpu(int cpu) -{ - cpumask_set_cpu(cpu, node_to_cpumask_map[early_cpu_to_node(cpu)]); -} - -void __cpuinit numa_remove_cpu(int cpu) -{ - cpumask_clear_cpu(cpu, node_to_cpumask_map[early_cpu_to_node(cpu)]); -} -#else +/* + * UGLINESS AHEAD: Currently, CONFIG_NUMA_EMU is 64bit only and makes use + * of 64bit specific data structures. The distinction is artificial and + * should be removed. numa_{add|remove}_cpu() are implemented in numa.c + * for both 32 and 64bit when CONFIG_NUMA_EMU is disabled but here when + * enabled. + * + * NUMA emulation is planned to be made generic and the following and other + * related code should be moved to numa.c. + */ +#ifdef CONFIG_NUMA_EMU +# ifndef CONFIG_DEBUG_PER_CPU_MAPS void __cpuinit numa_add_cpu(int cpu) { unsigned long addr; @@ -778,47 +777,7 @@ void __cpuinit numa_remove_cpu(int cpu) for_each_online_node(i) cpumask_clear_cpu(cpu, node_to_cpumask_map[i]); } -#endif /* !CONFIG_NUMA_EMU */ - -#else /* CONFIG_DEBUG_PER_CPU_MAPS */ -static struct cpumask __cpuinit *debug_cpumask_set_cpu(int cpu, int enable) -{ - int node = early_cpu_to_node(cpu); - struct cpumask *mask; - char buf[64]; - - mask = node_to_cpumask_map[node]; - if (!mask) { - pr_err("node_to_cpumask_map[%i] NULL\n", node); - dump_stack(); - return NULL; - } - - cpulist_scnprintf(buf, sizeof(buf), mask); - printk(KERN_DEBUG "%s cpu %d node %d: mask now %s\n", - enable ? "numa_add_cpu" : "numa_remove_cpu", - cpu, node, buf); - return mask; -} - -/* - * --------- debug versions of the numa functions --------- - */ -#ifndef CONFIG_NUMA_EMU -static void __cpuinit numa_set_cpumask(int cpu, int enable) -{ - struct cpumask *mask; - - mask = debug_cpumask_set_cpu(cpu, enable); - if (!mask) - return; - - if (enable) - cpumask_set_cpu(cpu, mask); - else - cpumask_clear_cpu(cpu, mask); -} -#else +# else /* !CONFIG_DEBUG_PER_CPU_MAPS */ static void __cpuinit numa_set_cpumask(int cpu, int enable) { int node = early_cpu_to_node(cpu); @@ -842,7 +801,6 @@ static void __cpuinit numa_set_cpumask(int cpu, int enable) cpumask_clear_cpu(cpu, mask); } } -#endif /* CONFIG_NUMA_EMU */ void __cpuinit numa_add_cpu(int cpu) { @@ -853,8 +811,5 @@ void __cpuinit numa_remove_cpu(int cpu) { numa_set_cpumask(cpu, 0); } -/* - * --------- end of debug versions of the numa functions --------- - */ - -#endif /* CONFIG_DEBUG_PER_CPU_MAPS */ +# endif /* !CONFIG_DEBUG_PER_CPU_MAPS */ +#endif /* CONFIG_NUMA_EMU */ -- cgit v1.2.3-18-g5258 From 8db78cc4b4048e3add40bca1bc3e55057c319256 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 23 Jan 2011 14:37:42 +0100 Subject: x86: Unify NUMA initialization between 32 and 64bit Now that everything else is unified, NUMA initialization can be unified too. * numa_init_array() and init_cpu_to_node() are moved from numa_64 to numa. * numa_32::initmem_init() is updated to call numa_init_array() and setup_arch() to call init_cpu_to_node() on 32bit too. * x86_cpu_to_node_map is now initialized to NUMA_NO_NODE on 32bit too. This is safe now as numa_init_array() will initialize it early during boot. This makes NUMA mapping fully initialized before setup_per_cpu_areas() on 32bit too and thus makes the first percpu chunk which contains all the static variables and some of dynamic area allocated with NUMA affinity correctly considered. Signed-off-by: Tejun Heo Cc: yinghai@kernel.org Cc: brgerst@gmail.com Cc: gorcunov@gmail.com Cc: shaohui.zheng@intel.com Cc: rientjes@google.com LKML-Reference: <1295789862-25482-17-git-send-email-tj@kernel.org> Signed-off-by: Ingo Molnar Reported-by: Eric Dumazet Reviewed-by: Pekka Enberg --- arch/x86/include/asm/numa.h | 4 +++ arch/x86/include/asm/numa_64.h | 3 -- arch/x86/kernel/setup.c | 2 -- arch/x86/mm/numa.c | 76 +++++++++++++++++++++++++++++++++++++++--- arch/x86/mm/numa_32.c | 1 + arch/x86/mm/numa_64.c | 75 ----------------------------------------- 6 files changed, 77 insertions(+), 84 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/numa.h b/arch/x86/include/asm/numa.h index d3964b28b12..26fc6e2dd0f 100644 --- a/arch/x86/include/asm/numa.h +++ b/arch/x86/include/asm/numa.h @@ -34,11 +34,15 @@ static inline void set_apicid_to_node(int apicid, s16 node) #ifdef CONFIG_NUMA extern void __cpuinit numa_set_node(int cpu, int node); extern void __cpuinit numa_clear_node(int cpu); +extern void __init numa_init_array(void); +extern void __init init_cpu_to_node(void); extern void __cpuinit numa_add_cpu(int cpu); extern void __cpuinit numa_remove_cpu(int cpu); #else /* CONFIG_NUMA */ static inline void numa_set_node(int cpu, int node) { } static inline void numa_clear_node(int cpu) { } +static inline void numa_init_array(void) { } +static inline void init_cpu_to_node(void) { } static inline void numa_add_cpu(int cpu) { } static inline void numa_remove_cpu(int cpu) { } #endif /* CONFIG_NUMA */ diff --git a/arch/x86/include/asm/numa_64.h b/arch/x86/include/asm/numa_64.h index 123f1856101..2819afa3363 100644 --- a/arch/x86/include/asm/numa_64.h +++ b/arch/x86/include/asm/numa_64.h @@ -13,7 +13,6 @@ extern int compute_hash_shift(struct bootnode *nodes, int numblks, #define ZONE_ALIGN (1UL << (MAX_ORDER+PAGE_SHIFT)) -extern void numa_init_array(void); extern int numa_off; extern unsigned long numa_free_all_bootmem(void); @@ -28,7 +27,6 @@ extern void setup_node_bootmem(int nodeid, unsigned long start, */ #define NODE_MIN_SIZE (4*1024*1024) -extern void __init init_cpu_to_node(void); extern int __cpuinit numa_cpu_node(int cpu); #ifdef CONFIG_NUMA_EMU @@ -37,7 +35,6 @@ extern int __cpuinit numa_cpu_node(int cpu); void numa_emu_cmdline(char *); #endif /* CONFIG_NUMA_EMU */ #else -static inline void init_cpu_to_node(void) { } static inline int numa_cpu_node(int cpu) { return NUMA_NO_NODE; } #endif diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index d3cfe26c025..12023412fdf 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -1040,9 +1040,7 @@ void __init setup_arch(char **cmdline_p) prefill_possible_map(); -#ifdef CONFIG_X86_64 init_cpu_to_node(); -#endif init_apic_mappings(); ioapic_and_gsi_init(); diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c index 75abecb614c..bf60715bd1b 100644 --- a/arch/x86/mm/numa.c +++ b/arch/x86/mm/numa.c @@ -38,11 +38,7 @@ EXPORT_SYMBOL(node_to_cpumask_map); /* * Map cpu index to node index */ -#ifdef CONFIG_X86_32 -DEFINE_EARLY_PER_CPU(int, x86_cpu_to_node_map, 0); -#else DEFINE_EARLY_PER_CPU(int, x86_cpu_to_node_map, NUMA_NO_NODE); -#endif EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_node_map); void __cpuinit numa_set_node(int cpu, int node) @@ -99,6 +95,78 @@ void __init setup_node_to_cpumask_map(void) pr_debug("Node to cpumask map for %d nodes\n", nr_node_ids); } +/* + * There are unfortunately some poorly designed mainboards around that + * only connect memory to a single CPU. This breaks the 1:1 cpu->node + * mapping. To avoid this fill in the mapping for all possible CPUs, + * as the number of CPUs is not known yet. We round robin the existing + * nodes. + */ +void __init numa_init_array(void) +{ + int rr, i; + + rr = first_node(node_online_map); + for (i = 0; i < nr_cpu_ids; i++) { + if (early_cpu_to_node(i) != NUMA_NO_NODE) + continue; + numa_set_node(i, rr); + rr = next_node(rr, node_online_map); + if (rr == MAX_NUMNODES) + rr = first_node(node_online_map); + } +} + +static __init int find_near_online_node(int node) +{ + int n, val; + int min_val = INT_MAX; + int best_node = -1; + + for_each_online_node(n) { + val = node_distance(node, n); + + if (val < min_val) { + min_val = val; + best_node = n; + } + } + + return best_node; +} + +/* + * Setup early cpu_to_node. + * + * Populate cpu_to_node[] only if x86_cpu_to_apicid[], + * and apicid_to_node[] tables have valid entries for a CPU. + * This means we skip cpu_to_node[] initialisation for NUMA + * emulation and faking node case (when running a kernel compiled + * for NUMA on a non NUMA box), which is OK as cpu_to_node[] + * is already initialized in a round robin manner at numa_init_array, + * prior to this call, and this initialization is good enough + * for the fake NUMA cases. + * + * Called before the per_cpu areas are setup. + */ +void __init init_cpu_to_node(void) +{ + int cpu; + u16 *cpu_to_apicid = early_per_cpu_ptr(x86_cpu_to_apicid); + + BUG_ON(cpu_to_apicid == NULL); + + for_each_possible_cpu(cpu) { + int node = numa_cpu_node(cpu); + + if (node == NUMA_NO_NODE) + continue; + if (!node_online(node)) + node = find_near_online_node(node); + numa_set_node(cpu, node); + } +} + #ifndef CONFIG_DEBUG_PER_CPU_MAPS # ifndef CONFIG_NUMA_EMU diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c index 8d91d227be0..505bb04654b 100644 --- a/arch/x86/mm/numa_32.c +++ b/arch/x86/mm/numa_32.c @@ -367,6 +367,7 @@ void __init initmem_init(unsigned long start_pfn, unsigned long end_pfn, */ get_memcfg_numa(); + numa_init_array(); kva_pages = roundup(calculate_numa_remap_pages(), PTRS_PER_PTE); diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index 14664f58a75..f548fbf75f4 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -224,28 +224,6 @@ setup_node_bootmem(int nodeid, unsigned long start, unsigned long end) node_set_online(nodeid); } -/* - * There are unfortunately some poorly designed mainboards around that - * only connect memory to a single CPU. This breaks the 1:1 cpu->node - * mapping. To avoid this fill in the mapping for all possible CPUs, - * as the number of CPUs is not known yet. We round robin the existing - * nodes. - */ -void __init numa_init_array(void) -{ - int rr, i; - - rr = first_node(node_online_map); - for (i = 0; i < nr_cpu_ids; i++) { - if (early_cpu_to_node(i) != NUMA_NO_NODE) - continue; - numa_set_node(i, rr); - rr = next_node(rr, node_online_map); - if (rr == MAX_NUMNODES) - rr = first_node(node_online_map); - } -} - #ifdef CONFIG_NUMA_EMU /* Numa emulation */ static struct bootnode nodes[MAX_NUMNODES] __initdata; @@ -664,59 +642,6 @@ unsigned long __init numa_free_all_bootmem(void) return pages; } -#ifdef CONFIG_NUMA - -static __init int find_near_online_node(int node) -{ - int n, val; - int min_val = INT_MAX; - int best_node = -1; - - for_each_online_node(n) { - val = node_distance(node, n); - - if (val < min_val) { - min_val = val; - best_node = n; - } - } - - return best_node; -} - -/* - * Setup early cpu_to_node. - * - * Populate cpu_to_node[] only if x86_cpu_to_apicid[], - * and apicid_to_node[] tables have valid entries for a CPU. - * This means we skip cpu_to_node[] initialisation for NUMA - * emulation and faking node case (when running a kernel compiled - * for NUMA on a non NUMA box), which is OK as cpu_to_node[] - * is already initialized in a round robin manner at numa_init_array, - * prior to this call, and this initialization is good enough - * for the fake NUMA cases. - * - * Called before the per_cpu areas are setup. - */ -void __init init_cpu_to_node(void) -{ - int cpu; - u16 *cpu_to_apicid = early_per_cpu_ptr(x86_cpu_to_apicid); - - BUG_ON(cpu_to_apicid == NULL); - - for_each_possible_cpu(cpu) { - int node = numa_cpu_node(cpu); - - if (node == NUMA_NO_NODE) - continue; - if (!node_online(node)) - node = find_near_online_node(node); - numa_set_node(cpu, node); - } -} -#endif - int __cpuinit numa_cpu_node(int cpu) { int apicid = early_per_cpu(x86_cpu_to_apicid, cpu); -- cgit v1.2.3-18-g5258 From 4e62445b90ac4ef708bd11c7ae052b1d5ef765b5 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 28 Jan 2011 17:22:48 +0100 Subject: x86: Fix build failure on X86_UP_APIC Commit 4c321ff8 (x86: Replace cpu_2_logical_apicid[] with early percpu variable) and following changes introduced and used x86_cpu_to_logical_apicid percpu variable. It was declared and defined inside CONFIG_SMP && CONFIG_X86_32 but if CONFIG_X86_UP_APIC is set UP configuration makes use of it and build fails. Fix it by declaring and defining it inside CONFIG_X86_LOCAL_APIC && CONFIG_X86_32. Signed-off-by: Tejun Heo Reported-by: Ingo Molnar Cc: eric.dumazet@gmail.com Cc: yinghai@kernel.org Cc: brgerst@gmail.com Cc: gorcunov@gmail.com Cc: penberg@kernel.org Cc: shaohui.zheng@intel.com Cc: rientjes@google.com LKML-Reference: <20110128162248.GA25746@htj.dyndns.org> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/smp.h | 2 +- arch/x86/kernel/apic/apic.c | 2 -- 2 files changed, 1 insertion(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h index dc7c46a89db..75927822c5c 100644 --- a/arch/x86/include/asm/smp.h +++ b/arch/x86/include/asm/smp.h @@ -38,7 +38,7 @@ static inline struct cpumask *cpu_core_mask(int cpu) DECLARE_EARLY_PER_CPU(u16, x86_cpu_to_apicid); DECLARE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid); -#if defined(CONFIG_SMP) && defined(CONFIG_X86_32) +#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_32) DECLARE_EARLY_PER_CPU(int, x86_cpu_to_logical_apicid); #endif diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 4686ea59b7a..1390cf985af 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -79,7 +79,6 @@ EXPORT_EARLY_PER_CPU_SYMBOL(x86_bios_cpu_apicid); #ifdef CONFIG_X86_32 -#ifdef CONFIG_SMP /* * On x86_32, the mapping between cpu and logical apicid may vary * depending on apic in use. The following early percpu variable is @@ -87,7 +86,6 @@ EXPORT_EARLY_PER_CPU_SYMBOL(x86_bios_cpu_apicid); * actually diverge. Let's keep it ugly for now. */ DEFINE_EARLY_PER_CPU(int, x86_cpu_to_logical_apicid, BAD_APICID); -#endif /* * Knob to control our willingness to enable the local APIC. -- cgit v1.2.3-18-g5258 From c8e4e7b12632771ab59f2e27fe120764642d06d2 Mon Sep 17 00:00:00 2001 From: David Brown Date: Wed, 26 Jan 2011 16:14:23 -0800 Subject: msm: Remove broken register definition from trout Missed a register change with the clock cleanup on the MSM7x01 targets. Signed-off-by: David Brown --- arch/arm/mach-msm/io.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c index d8d9be5d821..cec6ed1c91d 100644 --- a/arch/arm/mach-msm/io.c +++ b/arch/arm/mach-msm/io.c @@ -42,7 +42,6 @@ static struct map_desc msm_io_desc[] __initdata = { MSM_DEVICE(VIC), MSM_CHIP_DEVICE(CSR, MSM7X00), - MSM_DEVICE(GPT), MSM_DEVICE(DMOV), MSM_DEVICE(GPIO1), MSM_DEVICE(GPIO2), -- cgit v1.2.3-18-g5258 From 5c548add9899a1f8fcd47a58c4925c8ac4fc3027 Mon Sep 17 00:00:00 2001 From: David Brown Date: Wed, 26 Jan 2011 16:14:24 -0800 Subject: msm: Warning fix in trout gpio board file arch/arm/mach-msm/board-trout-gpio.c: In function 'trout_gpio_to_irq': arch/arm/mach-msm/board-trout-gpio.c:77: error: unused variable 'msm_gpio' Signed-off-by: David Brown --- arch/arm/mach-msm/board-trout-gpio.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-msm/board-trout-gpio.c b/arch/arm/mach-msm/board-trout-gpio.c index a604ec1e44b..31117a4499c 100644 --- a/arch/arm/mach-msm/board-trout-gpio.c +++ b/arch/arm/mach-msm/board-trout-gpio.c @@ -74,8 +74,6 @@ static int msm_gpiolib_direction_output(struct gpio_chip *chip, static int trout_gpio_to_irq(struct gpio_chip *chip, unsigned offset) { - struct msm_gpio_chip *msm_gpio = to_msm_gpio_chip(chip); - return TROUT_GPIO_TO_INT(offset + chip->base); } -- cgit v1.2.3-18-g5258 From 437f629d4ea0a574b6102101fe4a51232a7cc105 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 26 Jan 2011 16:20:52 -0800 Subject: msm: clock: Remove unused code and definitions This code is dead or otherwise useless so just remove it. Reviewed-by: Saravana Kannan Signed-off-by: Stephen Boyd Signed-off-by: David Brown --- arch/arm/mach-msm/board-msm8x60.c | 4 ---- arch/arm/mach-msm/clock.c | 20 ++----------------- arch/arm/mach-msm/clock.h | 42 --------------------------------------- 3 files changed, 2 insertions(+), 64 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c index 9b5eb2b4ae1..b3c55f138fc 100644 --- a/arch/arm/mach-msm/board-msm8x60.c +++ b/arch/arm/mach-msm/board-msm8x60.c @@ -28,10 +28,6 @@ #include #include -unsigned long clk_get_max_axi_khz(void) -{ - return 0; -} static void __init msm8x60_map_io(void) { diff --git a/arch/arm/mach-msm/clock.c b/arch/arm/mach-msm/clock.c index 2069bfaa3a2..b67498dfa8d 100644 --- a/arch/arm/mach-msm/clock.c +++ b/arch/arm/mach-msm/clock.c @@ -36,13 +36,6 @@ static LIST_HEAD(clocks); struct clk *msm_clocks; unsigned msm_num_clocks; -/* - * Bitmap of enabled clocks, excluding ACPU which is always - * enabled - */ -static DECLARE_BITMAP(clock_map_enabled, NR_CLKS); -static DEFINE_SPINLOCK(clock_map_lock); - /* * Standard clock functions defined in include/linux/clk.h */ @@ -77,12 +70,8 @@ int clk_enable(struct clk *clk) unsigned long flags; spin_lock_irqsave(&clocks_lock, flags); clk->count++; - if (clk->count == 1) { + if (clk->count == 1) clk->ops->enable(clk->id); - spin_lock(&clock_map_lock); - clock_map_enabled[BIT_WORD(clk->id)] |= BIT_MASK(clk->id); - spin_unlock(&clock_map_lock); - } spin_unlock_irqrestore(&clocks_lock, flags); return 0; } @@ -94,12 +83,8 @@ void clk_disable(struct clk *clk) spin_lock_irqsave(&clocks_lock, flags); BUG_ON(clk->count == 0); clk->count--; - if (clk->count == 0) { + if (clk->count == 0) clk->ops->disable(clk->id); - spin_lock(&clock_map_lock); - clock_map_enabled[BIT_WORD(clk->id)] &= ~BIT_MASK(clk->id); - spin_unlock(&clock_map_lock); - } spin_unlock_irqrestore(&clocks_lock, flags); } EXPORT_SYMBOL(clk_disable); @@ -196,7 +181,6 @@ void __init msm_clock_init(struct clk *clock_tbl, unsigned num_clocks) { unsigned n; - spin_lock_init(&clocks_lock); mutex_lock(&clocks_mutex); msm_clocks = clock_tbl; msm_num_clocks = num_clocks; diff --git a/arch/arm/mach-msm/clock.h b/arch/arm/mach-msm/clock.h index c270b552ed1..db9a77a0f9e 100644 --- a/arch/arm/mach-msm/clock.h +++ b/arch/arm/mach-msm/clock.h @@ -59,51 +59,9 @@ struct clk { struct device *dev; }; -#define A11S_CLK_CNTL_ADDR (MSM_CSR_BASE + 0x100) -#define A11S_CLK_SEL_ADDR (MSM_CSR_BASE + 0x104) -#define A11S_VDD_SVS_PLEVEL_ADDR (MSM_CSR_BASE + 0x124) - -#ifdef CONFIG_DEBUG_FS -#define CLOCK_DBG_NAME(x) .dbg_name = x, -#else -#define CLOCK_DBG_NAME(x) -#endif - -#define CLOCK(clk_name, clk_id, clk_dev, clk_flags) { \ - .name = clk_name, \ - .id = clk_id, \ - .flags = clk_flags, \ - .dev = clk_dev, \ - CLOCK_DBG_NAME(#clk_id) \ - } - #define OFF CLKFLAG_AUTO_OFF #define CLK_MIN CLKFLAG_MIN #define CLK_MAX CLKFLAG_MAX #define CLK_MINMAX (CLK_MIN | CLK_MAX) -#define NR_CLKS P_NR_CLKS - -enum { - PLL_0 = 0, - PLL_1, - PLL_2, - PLL_3, - PLL_4, - PLL_5, - PLL_6, - NUM_PLL -}; - -enum clkvote_client { - CLKVOTE_ACPUCLK = 0, - CLKVOTE_PMQOS, - CLKVOTE_MAX, -}; - -int msm_clock_require_tcxo(unsigned long *reason, int nbits); -int msm_clock_get_name(uint32_t id, char *name, uint32_t size); -int ebi1_clk_set_min_rate(enum clkvote_client client, unsigned long rate); -unsigned long clk_get_max_axi_khz(void); #endif - -- cgit v1.2.3-18-g5258 From ce1c80fbaa3b8e132d4e430cbf7cb4a9cd28b2d5 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 26 Jan 2011 16:20:53 -0800 Subject: msm: clock: Remove 7x30 and pcom includes from clock.h clock.h includes clock-pcom.h and clock-7x30.h when it really doesn't need to. Remove the includes and fixup breakages. Reviewed-By: Saravana Kannan Signed-off-by: Stephen Boyd Signed-off-by: David Brown --- arch/arm/mach-msm/clock-pcom.c | 1 + arch/arm/mach-msm/clock.c | 1 + arch/arm/mach-msm/clock.h | 3 --- arch/arm/mach-msm/devices-msm7x00.c | 1 + arch/arm/mach-msm/devices-msm7x30.c | 1 + arch/arm/mach-msm/devices-qsd8x50.c | 1 + 6 files changed, 5 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-msm/clock-pcom.c b/arch/arm/mach-msm/clock-pcom.c index a3b45627eb4..8c4e8672501 100644 --- a/arch/arm/mach-msm/clock-pcom.c +++ b/arch/arm/mach-msm/clock-pcom.c @@ -20,6 +20,7 @@ #include "proc_comm.h" #include "clock.h" +#include "clock-pcom.h" /* * glue for the proc_comm interface diff --git a/arch/arm/mach-msm/clock.c b/arch/arm/mach-msm/clock.c index b67498dfa8d..8f71f8d9fa9 100644 --- a/arch/arm/mach-msm/clock.c +++ b/arch/arm/mach-msm/clock.c @@ -29,6 +29,7 @@ #include "clock.h" #include "proc_comm.h" #include "clock-7x30.h" +#include "clock-pcom.h" static DEFINE_MUTEX(clocks_mutex); static DEFINE_SPINLOCK(clocks_lock); diff --git a/arch/arm/mach-msm/clock.h b/arch/arm/mach-msm/clock.h index db9a77a0f9e..6a0cadeabb9 100644 --- a/arch/arm/mach-msm/clock.h +++ b/arch/arm/mach-msm/clock.h @@ -20,9 +20,6 @@ #include #include -#include "clock-pcom.h" -#include "clock-7x30.h" - #define CLKFLAG_INVERT 0x00000001 #define CLKFLAG_NOINVERT 0x00000002 #define CLKFLAG_NONEST 0x00000004 diff --git a/arch/arm/mach-msm/devices-msm7x00.c b/arch/arm/mach-msm/devices-msm7x00.c index fb548a8a21d..0a47678143f 100644 --- a/arch/arm/mach-msm/devices-msm7x00.c +++ b/arch/arm/mach-msm/devices-msm7x00.c @@ -26,6 +26,7 @@ #include "clock.h" +#include "clock-pcom.h" #include static struct resource resources_uart1[] = { diff --git a/arch/arm/mach-msm/devices-msm7x30.c b/arch/arm/mach-msm/devices-msm7x30.c index 4e9a0ab3e93..5dc64afd9ae 100644 --- a/arch/arm/mach-msm/devices-msm7x30.c +++ b/arch/arm/mach-msm/devices-msm7x30.c @@ -28,6 +28,7 @@ #include #include "clock-pcom.h" +#include "clock-7x30.h" #include diff --git a/arch/arm/mach-msm/devices-qsd8x50.c b/arch/arm/mach-msm/devices-qsd8x50.c index a4b798f20cc..c08e48e65f0 100644 --- a/arch/arm/mach-msm/devices-qsd8x50.c +++ b/arch/arm/mach-msm/devices-qsd8x50.c @@ -27,6 +27,7 @@ #include #include +#include "clock-pcom.h" static struct resource resources_uart3[] = { { -- cgit v1.2.3-18-g5258 From d64560fe3e9bf64b2050ceeb6b6946ba2a4efda0 Mon Sep 17 00:00:00 2001 From: Matt Wagantall Date: Wed, 26 Jan 2011 16:20:54 -0800 Subject: msm: clock: Move debugfs code from clock.c to clock-debug.c The clock debugfs code is large enough, and easy enough to separate, that it deserves its own file which is compiled only when CONFIG_DEBUG_FS is enabled. Also, cleanup header file #includes that are no longer required. Reviewed-by: Saravana Kannan Signed-off-by: Matt Wagantall Signed-off-by: Stephen Boyd Signed-off-by: David Brown --- arch/arm/mach-msm/Makefile | 3 + arch/arm/mach-msm/clock-debug.c | 133 ++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-msm/clock.c | 127 ++------------------------------------ arch/arm/mach-msm/clock.h | 9 +++ 4 files changed, 150 insertions(+), 122 deletions(-) create mode 100644 arch/arm/mach-msm/clock-debug.c (limited to 'arch') diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index 0e5c9dc2383..c7964417dae 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -1,4 +1,7 @@ obj-y += io.o idle.o timer.o +ifdef CONFIG_MSM_PROC_COMM +obj-$(CONFIG_DEBUG_FS) += clock-debug.o +endif obj-$(CONFIG_MSM_VIC) += irq-vic.o diff --git a/arch/arm/mach-msm/clock-debug.c b/arch/arm/mach-msm/clock-debug.c new file mode 100644 index 00000000000..6f603edbb4d --- /dev/null +++ b/arch/arm/mach-msm/clock-debug.c @@ -0,0 +1,133 @@ +/* + * Copyright (C) 2007 Google, Inc. + * Copyright (c) 2007-2010, Code Aurora Forum. All rights reserved. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include "clock.h" +#include "clock-pcom.h" + +static int clock_debug_rate_set(void *data, u64 val) +{ + struct clk *clock = data; + int ret; + + /* Only increases to max rate will succeed, but that's actually good + * for debugging purposes so we don't check for error. */ + if (clock->flags & CLK_MAX) + clk_set_max_rate(clock, val); + if (clock->flags & CLK_MIN) + ret = clk_set_min_rate(clock, val); + else + ret = clk_set_rate(clock, val); + if (ret != 0) + printk(KERN_ERR "clk_set%s_rate failed (%d)\n", + (clock->flags & CLK_MIN) ? "_min" : "", ret); + return ret; +} + +static int clock_debug_rate_get(void *data, u64 *val) +{ + struct clk *clock = data; + *val = clk_get_rate(clock); + return 0; +} + +DEFINE_SIMPLE_ATTRIBUTE(clock_rate_fops, clock_debug_rate_get, + clock_debug_rate_set, "%llu\n"); + +static int clock_debug_enable_set(void *data, u64 val) +{ + struct clk *clock = data; + int rc = 0; + + if (val) + rc = clock->ops->enable(clock->id); + else + clock->ops->disable(clock->id); + + return rc; +} + +static int clock_debug_enable_get(void *data, u64 *val) +{ + struct clk *clock = data; + + *val = clock->ops->is_enabled(clock->id); + + return 0; +} + +DEFINE_SIMPLE_ATTRIBUTE(clock_enable_fops, clock_debug_enable_get, + clock_debug_enable_set, "%llu\n"); + +static int clock_debug_local_get(void *data, u64 *val) +{ + struct clk *clock = data; + + *val = clock->ops != &clk_ops_pcom; + + return 0; +} + +DEFINE_SIMPLE_ATTRIBUTE(clock_local_fops, clock_debug_local_get, + NULL, "%llu\n"); + +static struct dentry *dent_rate, *dent_enable, *dent_local; + +int __init clock_debug_init(void) +{ + dent_rate = debugfs_create_dir("clk_rate", 0); + if (!dent_rate) + goto err; + + dent_enable = debugfs_create_dir("clk_enable", 0); + if (!dent_enable) + goto err; + + dent_local = debugfs_create_dir("clk_local", NULL); + if (!dent_local) + goto err; + + return 0; +err: + debugfs_remove(dent_local); + debugfs_remove(dent_enable); + debugfs_remove(dent_rate); + return -ENOMEM; +} + +int __init clock_debug_add(struct clk *clock) +{ + char temp[50], *ptr; + + if (!dent_rate || !dent_enable || !dent_local) + return -ENOMEM; + + strncpy(temp, clock->dbg_name, ARRAY_SIZE(temp)-1); + for (ptr = temp; *ptr; ptr++) + *ptr = tolower(*ptr); + + debugfs_create_file(temp, S_IRUGO | S_IWUSR, dent_rate, + clock, &clock_rate_fops); + debugfs_create_file(temp, S_IRUGO | S_IWUSR, dent_enable, + clock, &clock_enable_fops); + debugfs_create_file(temp, S_IRUGO, dent_local, + clock, &clock_local_fops); + + return 0; +} diff --git a/arch/arm/mach-msm/clock.c b/arch/arm/mach-msm/clock.c index 8f71f8d9fa9..8c2b4dd4a87 100644 --- a/arch/arm/mach-msm/clock.c +++ b/arch/arm/mach-msm/clock.c @@ -15,16 +15,10 @@ */ #include -#include -#include #include #include -#include #include -#include -#include #include -#include #include "clock.h" #include "proc_comm.h" @@ -34,8 +28,6 @@ static DEFINE_MUTEX(clocks_mutex); static DEFINE_SPINLOCK(clocks_lock); static LIST_HEAD(clocks); -struct clk *msm_clocks; -unsigned msm_num_clocks; /* * Standard clock functions defined in include/linux/clk.h @@ -183,11 +175,9 @@ void __init msm_clock_init(struct clk *clock_tbl, unsigned num_clocks) unsigned n; mutex_lock(&clocks_mutex); - msm_clocks = clock_tbl; - msm_num_clocks = num_clocks; - for (n = 0; n < msm_num_clocks; n++) { - set_clock_ops(&msm_clocks[n]); - list_add_tail(&msm_clocks[n].list, &clocks); + for (n = 0; n < num_clocks; n++) { + set_clock_ops(&clock_tbl[n]); + list_add_tail(&clock_tbl[n].list, &clocks); } mutex_unlock(&clocks_mutex); @@ -196,115 +186,6 @@ void __init msm_clock_init(struct clk *clock_tbl, unsigned num_clocks) } -#if defined(CONFIG_DEBUG_FS) -static struct clk *msm_clock_get_nth(unsigned index) -{ - if (index < msm_num_clocks) - return msm_clocks + index; - else - return 0; -} - -static int clock_debug_rate_set(void *data, u64 val) -{ - struct clk *clock = data; - int ret; - - /* Only increases to max rate will succeed, but that's actually good - * for debugging purposes. So we don't check for error. */ - if (clock->flags & CLK_MAX) - clk_set_max_rate(clock, val); - if (clock->flags & CLK_MIN) - ret = clk_set_min_rate(clock, val); - else - ret = clk_set_rate(clock, val); - if (ret != 0) - printk(KERN_ERR "clk_set%s_rate failed (%d)\n", - (clock->flags & CLK_MIN) ? "_min" : "", ret); - return ret; -} - -static int clock_debug_rate_get(void *data, u64 *val) -{ - struct clk *clock = data; - *val = clk_get_rate(clock); - return 0; -} - -static int clock_debug_enable_set(void *data, u64 val) -{ - struct clk *clock = data; - int rc = 0; - - if (val) - rc = clock->ops->enable(clock->id); - else - clock->ops->disable(clock->id); - - return rc; -} - -static int clock_debug_enable_get(void *data, u64 *val) -{ - struct clk *clock = data; - - *val = clock->ops->is_enabled(clock->id); - - return 0; -} - -static int clock_debug_local_get(void *data, u64 *val) -{ - struct clk *clock = data; - - *val = clock->ops != &clk_ops_pcom; - - return 0; -} - -DEFINE_SIMPLE_ATTRIBUTE(clock_rate_fops, clock_debug_rate_get, - clock_debug_rate_set, "%llu\n"); -DEFINE_SIMPLE_ATTRIBUTE(clock_enable_fops, clock_debug_enable_get, - clock_debug_enable_set, "%llu\n"); -DEFINE_SIMPLE_ATTRIBUTE(clock_local_fops, clock_debug_local_get, - NULL, "%llu\n"); - -static int __init clock_debug_init(void) -{ - struct dentry *dent_rate, *dent_enable, *dent_local; - struct clk *clock; - unsigned n = 0; - char temp[50], *ptr; - - dent_rate = debugfs_create_dir("clk_rate", 0); - if (IS_ERR(dent_rate)) - return PTR_ERR(dent_rate); - - dent_enable = debugfs_create_dir("clk_enable", 0); - if (IS_ERR(dent_enable)) - return PTR_ERR(dent_enable); - - dent_local = debugfs_create_dir("clk_local", NULL); - if (IS_ERR(dent_local)) - return PTR_ERR(dent_local); - - while ((clock = msm_clock_get_nth(n++)) != 0) { - strncpy(temp, clock->dbg_name, ARRAY_SIZE(temp)-1); - for (ptr = temp; *ptr; ptr++) - *ptr = tolower(*ptr); - debugfs_create_file(temp, 0644, dent_rate, - clock, &clock_rate_fops); - debugfs_create_file(temp, 0644, dent_enable, - clock, &clock_enable_fops); - debugfs_create_file(temp, S_IRUGO, dent_local, - clock, &clock_local_fops); - } - return 0; -} - -device_initcall(clock_debug_init); -#endif - /* The bootloader and/or AMSS may have left various clocks enabled. * Disable any clocks that belong to us (CLKFLAG_AUTO_OFF) but have * not been explicitly enabled by a clk_enable() call. @@ -315,8 +196,10 @@ static int __init clock_late_init(void) struct clk *clk; unsigned count = 0; + clock_debug_init(); mutex_lock(&clocks_mutex); list_for_each_entry(clk, &clocks, list) { + clock_debug_add(clk); if (clk->flags & CLKFLAG_AUTO_OFF) { spin_lock_irqsave(&clocks_lock, flags); if (!clk->count) { diff --git a/arch/arm/mach-msm/clock.h b/arch/arm/mach-msm/clock.h index 6a0cadeabb9..70216b0e968 100644 --- a/arch/arm/mach-msm/clock.h +++ b/arch/arm/mach-msm/clock.h @@ -17,6 +17,7 @@ #ifndef __ARCH_ARM_MACH_MSM_CLOCK_H #define __ARCH_ARM_MACH_MSM_CLOCK_H +#include #include #include @@ -61,4 +62,12 @@ struct clk { #define CLK_MAX CLKFLAG_MAX #define CLK_MINMAX (CLK_MIN | CLK_MAX) +#ifdef CONFIG_DEBUG_FS +int __init clock_debug_init(void); +int __init clock_debug_add(struct clk *clock); +#else +static inline int __init clock_debug_init(void) { return 0; } +static inline int __init clock_debug_add(struct clk *clock) { return 0; } +#endif + #endif -- cgit v1.2.3-18-g5258 From 6e6d9b5bec5b27164126894c452853e4cac19b15 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 26 Jan 2011 16:20:55 -0800 Subject: msm: clock: Invert debugfs directory layout There are currently 3 separate directories for clock debugging in debugfs: clk_enable, clk_rate, and clk_local. Each of these directories contains a list of clocks. This is rather annoying when you are focusing on one clock and want to enable/disable it and then check its rate. You either have to cd to the other directory or cat ../clk_rate/. Invert the layout so that there is one clock directory containing a directory for each clock. Inside each respective clock directory place an enable, rate, and is_local file relating to the clk_enable, clk_disable, and clk_local directories that exist today. Reviewed-by: Saravana Kannan Signed-off-by: Stephen Boyd Signed-off-by: David Brown --- arch/arm/mach-msm/clock-debug.c | 48 ++++++++++++++++++++--------------------- 1 file changed, 23 insertions(+), 25 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-msm/clock-debug.c b/arch/arm/mach-msm/clock-debug.c index 6f603edbb4d..b67b9e82ece 100644 --- a/arch/arm/mach-msm/clock-debug.c +++ b/arch/arm/mach-msm/clock-debug.c @@ -87,47 +87,45 @@ static int clock_debug_local_get(void *data, u64 *val) DEFINE_SIMPLE_ATTRIBUTE(clock_local_fops, clock_debug_local_get, NULL, "%llu\n"); -static struct dentry *dent_rate, *dent_enable, *dent_local; +static struct dentry *debugfs_base; int __init clock_debug_init(void) { - dent_rate = debugfs_create_dir("clk_rate", 0); - if (!dent_rate) - goto err; - - dent_enable = debugfs_create_dir("clk_enable", 0); - if (!dent_enable) - goto err; - - dent_local = debugfs_create_dir("clk_local", NULL); - if (!dent_local) - goto err; - + debugfs_base = debugfs_create_dir("clk", NULL); + if (!debugfs_base) + return -ENOMEM; return 0; -err: - debugfs_remove(dent_local); - debugfs_remove(dent_enable); - debugfs_remove(dent_rate); - return -ENOMEM; } int __init clock_debug_add(struct clk *clock) { char temp[50], *ptr; + struct dentry *clk_dir; - if (!dent_rate || !dent_enable || !dent_local) + if (!debugfs_base) return -ENOMEM; strncpy(temp, clock->dbg_name, ARRAY_SIZE(temp)-1); for (ptr = temp; *ptr; ptr++) *ptr = tolower(*ptr); - debugfs_create_file(temp, S_IRUGO | S_IWUSR, dent_rate, - clock, &clock_rate_fops); - debugfs_create_file(temp, S_IRUGO | S_IWUSR, dent_enable, - clock, &clock_enable_fops); - debugfs_create_file(temp, S_IRUGO, dent_local, - clock, &clock_local_fops); + clk_dir = debugfs_create_dir(temp, debugfs_base); + if (!clk_dir) + return -ENOMEM; + + if (!debugfs_create_file("rate", S_IRUGO | S_IWUSR, clk_dir, + clock, &clock_rate_fops)) + goto error; + if (!debugfs_create_file("enable", S_IRUGO | S_IWUSR, clk_dir, + clock, &clock_enable_fops)) + goto error; + + if (!debugfs_create_file("is_local", S_IRUGO, clk_dir, clock, + &clock_local_fops)) + goto error; return 0; +error: + debugfs_remove_recursive(clk_dir); + return -ENOMEM; } -- cgit v1.2.3-18-g5258 From f689ac98777b8ca7278c1099dfc2ebecde397523 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 26 Jan 2011 16:20:56 -0800 Subject: msm: clock: Add support for more proc_comm clocks Add support for the ce, codec_ssbi, uart clocks, and i2c clocks. Reviewed-by: Saravana Kannan Signed-off-by: Stephen Boyd Signed-off-by: David Brown --- arch/arm/mach-msm/clock-pcom.h | 4 +++- arch/arm/mach-msm/devices-msm7x30.c | 2 ++ arch/arm/mach-msm/devices-qsd8x50.c | 6 ++++++ 3 files changed, 11 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-msm/clock-pcom.h b/arch/arm/mach-msm/clock-pcom.h index 17d027b2350..2c813f1dba2 100644 --- a/arch/arm/mach-msm/clock-pcom.h +++ b/arch/arm/mach-msm/clock-pcom.h @@ -132,8 +132,10 @@ #define P_CSI1_P_CLK 97 #define P_GSBI_CLK 98 #define P_GSBI_P_CLK 99 +#define P_CE_CLK 100 /* Crypto engine */ +#define P_CODEC_SSBI_CLK 101 -#define P_NR_CLKS 100 +#define P_NR_CLKS 102 struct clk_ops; extern struct clk_ops clk_ops_pcom; diff --git a/arch/arm/mach-msm/devices-msm7x30.c b/arch/arm/mach-msm/devices-msm7x30.c index 5dc64afd9ae..8bd730792ff 100644 --- a/arch/arm/mach-msm/devices-msm7x30.c +++ b/arch/arm/mach-msm/devices-msm7x30.c @@ -133,6 +133,8 @@ struct clk msm_clocks_7x30[] = { CLK_PCOM("adsp_clk", ADSP_CLK, NULL, 0), CLK_PCOM("cam_m_clk", CAM_M_CLK, NULL, 0), CLK_PCOM("camif_pad_pclk", CAMIF_PAD_P_CLK, NULL, OFF), + CLK_PCOM("ce_clk", CE_CLK, NULL, 0), + CLK_PCOM("codec_ssbi_clk", CODEC_SSBI_CLK, NULL, 0), CLK_PCOM("ebi1_clk", EBI1_CLK, NULL, CLK_MIN), CLK_PCOM("ecodec_clk", ECODEC_CLK, NULL, 0), CLK_PCOM("emdh_clk", EMDH_CLK, NULL, OFF | CLK_MINMAX), diff --git a/arch/arm/mach-msm/devices-qsd8x50.c b/arch/arm/mach-msm/devices-qsd8x50.c index c08e48e65f0..4cbf89dda73 100644 --- a/arch/arm/mach-msm/devices-qsd8x50.c +++ b/arch/arm/mach-msm/devices-qsd8x50.c @@ -127,12 +127,14 @@ struct platform_device msm_device_hsusb_host = { struct clk msm_clocks_8x50[] = { CLK_PCOM("adm_clk", ADM_CLK, NULL, 0), + CLK_PCOM("ce_clk", CE_CLK, NULL, 0), CLK_PCOM("ebi1_clk", EBI1_CLK, NULL, CLK_MIN), CLK_PCOM("ebi2_clk", EBI2_CLK, NULL, 0), CLK_PCOM("ecodec_clk", ECODEC_CLK, NULL, 0), CLK_PCOM("emdh_clk", EMDH_CLK, NULL, OFF | CLK_MINMAX), CLK_PCOM("gp_clk", GP_CLK, NULL, 0), CLK_PCOM("grp_clk", GRP_3D_CLK, NULL, 0), + CLK_PCOM("i2c_clk", I2C_CLK, NULL, 0), CLK_PCOM("icodec_rx_clk", ICODEC_RX_CLK, NULL, 0), CLK_PCOM("icodec_tx_clk", ICODEC_TX_CLK, NULL, 0), CLK_PCOM("imem_clk", IMEM_CLK, NULL, OFF), @@ -150,7 +152,11 @@ struct clk msm_clocks_8x50[] = { CLK_PCOM("tsif_ref_clk", TSIF_REF_CLK, NULL, 0), CLK_PCOM("tv_dac_clk", TV_DAC_CLK, NULL, 0), CLK_PCOM("tv_enc_clk", TV_ENC_CLK, NULL, 0), + CLK_PCOM("uart_clk", UART1_CLK, NULL, OFF), + CLK_PCOM("uart_clk", UART2_CLK, NULL, 0), CLK_PCOM("uart_clk", UART3_CLK, &msm_device_uart3.dev, OFF), + CLK_PCOM("uartdm_clk", UART1DM_CLK, NULL, OFF), + CLK_PCOM("uartdm_clk", UART2DM_CLK, NULL, 0), CLK_PCOM("usb_hs_clk", USB_HS_CLK, NULL, OFF), CLK_PCOM("usb_hs_pclk", USB_HS_P_CLK, NULL, OFF), CLK_PCOM("usb_otg_clk", USB_OTG_CLK, NULL, 0), -- cgit v1.2.3-18-g5258 From 07a3cc4814f790354d4c7be2c9dc6143a714a07a Mon Sep 17 00:00:00 2001 From: Stepan Moskovchenko Date: Thu, 27 Jan 2011 12:13:22 -0800 Subject: msm: Clean up useless ifdefs Remove ifdefs that do nothing, either from having the code between them previously removed, or from having been accidentally added to the wrong file. Signed-off-by: Stepan Moskovchenko Signed-off-by: David Brown --- arch/arm/mach-msm/board-halibut.c | 2 -- arch/arm/mach-msm/board-mahimahi.c | 2 -- arch/arm/mach-msm/board-msm7x27.c | 8 -------- arch/arm/mach-msm/board-msm7x30.c | 6 ------ arch/arm/mach-msm/board-qsd8x50.c | 4 ---- arch/arm/mach-msm/board-sapphire.c | 2 -- arch/arm/mach-msm/board-trout.c | 2 -- arch/arm/mach-msm/include/mach/msm_iomap-7x00.h | 6 ------ 8 files changed, 32 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c index 75dabb16c80..18a3c97bc86 100644 --- a/arch/arm/mach-msm/board-halibut.c +++ b/arch/arm/mach-msm/board-halibut.c @@ -93,8 +93,6 @@ static void __init halibut_map_io(void) } MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)") -#ifdef CONFIG_MSM_DEBUG_UART -#endif .boot_params = 0x10000100, .fixup = halibut_fixup, .map_io = halibut_map_io, diff --git a/arch/arm/mach-msm/board-mahimahi.c b/arch/arm/mach-msm/board-mahimahi.c index ef3ebf2f763..7a9a03eb189 100644 --- a/arch/arm/mach-msm/board-mahimahi.c +++ b/arch/arm/mach-msm/board-mahimahi.c @@ -74,8 +74,6 @@ static void __init mahimahi_map_io(void) extern struct sys_timer msm_timer; MACHINE_START(MAHIMAHI, "mahimahi") -#ifdef CONFIG_MSM_DEBUG_UART -#endif .boot_params = 0x20000100, .fixup = mahimahi_fixup, .map_io = mahimahi_map_io, diff --git a/arch/arm/mach-msm/board-msm7x27.c b/arch/arm/mach-msm/board-msm7x27.c index e7a76eff57d..16d75807e3a 100644 --- a/arch/arm/mach-msm/board-msm7x27.c +++ b/arch/arm/mach-msm/board-msm7x27.c @@ -130,8 +130,6 @@ static void __init msm7x2x_map_io(void) } MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF") -#ifdef CONFIG_MSM_DEBUG_UART -#endif .boot_params = PHYS_OFFSET + 0x100, .map_io = msm7x2x_map_io, .init_irq = msm7x2x_init_irq, @@ -140,8 +138,6 @@ MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF") MACHINE_END MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA") -#ifdef CONFIG_MSM_DEBUG_UART -#endif .boot_params = PHYS_OFFSET + 0x100, .map_io = msm7x2x_map_io, .init_irq = msm7x2x_init_irq, @@ -150,8 +146,6 @@ MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA") MACHINE_END MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF") -#ifdef CONFIG_MSM_DEBUG_UART -#endif .boot_params = PHYS_OFFSET + 0x100, .map_io = msm7x2x_map_io, .init_irq = msm7x2x_init_irq, @@ -160,8 +154,6 @@ MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF") MACHINE_END MACHINE_START(MSM7X25_FFA, "QCT MSM7x25 FFA") -#ifdef CONFIG_MSM_DEBUG_UART -#endif .boot_params = PHYS_OFFSET + 0x100, .map_io = msm7x2x_map_io, .init_irq = msm7x2x_init_irq, diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c index 0707cc041f2..dc9fac107c6 100644 --- a/arch/arm/mach-msm/board-msm7x30.c +++ b/arch/arm/mach-msm/board-msm7x30.c @@ -105,8 +105,6 @@ static void __init msm7x30_map_io(void) } MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF") -#ifdef CONFIG_MSM_DEBUG_UART -#endif .boot_params = PHYS_OFFSET + 0x100, .map_io = msm7x30_map_io, .init_irq = msm7x30_init_irq, @@ -115,8 +113,6 @@ MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF") MACHINE_END MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA") -#ifdef CONFIG_MSM_DEBUG_UART -#endif .boot_params = PHYS_OFFSET + 0x100, .map_io = msm7x30_map_io, .init_irq = msm7x30_init_irq, @@ -125,8 +121,6 @@ MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA") MACHINE_END MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID") -#ifdef CONFIG_MSM_DEBUG_UART -#endif .boot_params = PHYS_OFFSET + 0x100, .map_io = msm7x30_map_io, .init_irq = msm7x30_init_irq, diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c index 6dde8185205..3edc4de7e54 100644 --- a/arch/arm/mach-msm/board-qsd8x50.c +++ b/arch/arm/mach-msm/board-qsd8x50.c @@ -116,8 +116,6 @@ static void __init qsd8x50_init(void) } MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF") -#ifdef CONFIG_MSM_DEBUG_UART -#endif .boot_params = PHYS_OFFSET + 0x100, .map_io = qsd8x50_map_io, .init_irq = qsd8x50_init_irq, @@ -126,8 +124,6 @@ MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF") MACHINE_END MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5") -#ifdef CONFIG_MSM_DEBUG_UART -#endif .boot_params = PHYS_OFFSET + 0x100, .map_io = qsd8x50_map_io, .init_irq = qsd8x50_init_irq, diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c index 8919ffb1719..6781ca844f2 100644 --- a/arch/arm/mach-msm/board-sapphire.c +++ b/arch/arm/mach-msm/board-sapphire.c @@ -105,8 +105,6 @@ static void __init sapphire_map_io(void) MACHINE_START(SAPPHIRE, "sapphire") /* Maintainer: Brian Swetland */ -#ifdef CONFIG_MSM_DEBUG_UART -#endif .boot_params = PHYS_OFFSET + 0x100, .fixup = sapphire_fixup, .map_io = sapphire_map_io, diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c index 73f14606654..8448687f5a4 100644 --- a/arch/arm/mach-msm/board-trout.c +++ b/arch/arm/mach-msm/board-trout.c @@ -92,8 +92,6 @@ static void __init trout_map_io(void) } MACHINE_START(TROUT, "HTC Dream") -#ifdef CONFIG_MSM_DEBUG_UART -#endif .boot_params = 0x10000100, .fixup = trout_fixup, .map_io = trout_map_io, diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h index 1e75ed74f16..8f99d97615a 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h @@ -126,10 +126,4 @@ #define MSM_AD5_SIZE (SZ_1M*13) -#if defined(CONFIG_ARCH_MSM7X30) -#define MSM_GCC_BASE IOMEM(0xF8009000) -#define MSM_GCC_PHYS 0xC0182000 -#define MSM_GCC_SIZE SZ_4K -#endif - #endif -- cgit v1.2.3-18-g5258 From d056fca32354dd990ffbd90fd1da10eaec72aa87 Mon Sep 17 00:00:00 2001 From: Stepan Moskovchenko Date: Thu, 27 Jan 2011 12:12:07 -0800 Subject: msm: serial: Add MSM8960 serial support Add the device definitions and platform data to support the console serial port on MSM8960 Simulator and RUMI3 targets. Signed-off-by: Stepan Moskovchenko Signed-off-by: David Brown --- arch/arm/mach-msm/Makefile | 2 +- arch/arm/mach-msm/board-msm8960.c | 22 ++++++++++ arch/arm/mach-msm/devices-msm8960.c | 85 +++++++++++++++++++++++++++++++++++++ arch/arm/mach-msm/devices.h | 3 ++ 4 files changed, 111 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-msm/devices-msm8960.c (limited to 'arch') diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index c7964417dae..ea8c74f56ea 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -27,7 +27,7 @@ obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o obj-$(CONFIG_ARCH_MSM8X60) += board-msm8x60.o -obj-$(CONFIG_ARCH_MSM8960) += board-msm8960.o +obj-$(CONFIG_ARCH_MSM8960) += board-msm8960.o devices-msm8960.o obj-$(CONFIG_ARCH_MSM7X30) += gpiomux-v1.o gpiomux.o obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o gpiomux-v1.o gpiomux.o diff --git a/arch/arm/mach-msm/board-msm8960.c b/arch/arm/mach-msm/board-msm8960.c index 2b095735f14..ef80f46d6cb 100644 --- a/arch/arm/mach-msm/board-msm8960.c +++ b/arch/arm/mach-msm/board-msm8960.c @@ -27,6 +27,8 @@ #include #include +#include "devices.h" + static void __init msm8960_map_io(void) { msm_map_msm8960_io(); @@ -54,15 +56,35 @@ static void __init msm8960_init_irq(void) } } +static struct platform_device *sim_devices[] __initdata = { + &msm8960_device_uart_gsbi2, +}; + +static struct platform_device *rumi3_devices[] __initdata = { + &msm8960_device_uart_gsbi5, +}; + +static void __init msm8960_sim_init(void) +{ + platform_add_devices(sim_devices, ARRAY_SIZE(sim_devices)); +} + +static void __init msm8960_rumi3_init(void) +{ + platform_add_devices(rumi3_devices, ARRAY_SIZE(rumi3_devices)); +} + MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR") .map_io = msm8960_map_io, .init_irq = msm8960_init_irq, .timer = &msm_timer, + .init_machine = msm8960_sim_init, MACHINE_END MACHINE_START(MSM8960_RUMI3, "QCT MSM8960 RUMI3") .map_io = msm8960_map_io, .init_irq = msm8960_init_irq, .timer = &msm_timer, + .init_machine = msm8960_rumi3_init, MACHINE_END diff --git a/arch/arm/mach-msm/devices-msm8960.c b/arch/arm/mach-msm/devices-msm8960.c new file mode 100644 index 00000000000..d9e1f26475d --- /dev/null +++ b/arch/arm/mach-msm/devices-msm8960.c @@ -0,0 +1,85 @@ +/* Copyright (c) 2011, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#include +#include + +#include +#include +#include + +#include "devices.h" + +#define MSM_GSBI2_PHYS 0x16100000 +#define MSM_UART2DM_PHYS (MSM_GSBI2_PHYS + 0x40000) + +#define MSM_GSBI5_PHYS 0x16400000 +#define MSM_UART5DM_PHYS (MSM_GSBI5_PHYS + 0x40000) + +static struct resource resources_uart_gsbi2[] = { + { + .start = GSBI2_UARTDM_IRQ, + .end = GSBI2_UARTDM_IRQ, + .flags = IORESOURCE_IRQ, + }, + { + .start = MSM_UART2DM_PHYS, + .end = MSM_UART2DM_PHYS + PAGE_SIZE - 1, + .name = "uart_resource", + .flags = IORESOURCE_MEM, + }, + { + .start = MSM_GSBI2_PHYS, + .end = MSM_GSBI2_PHYS + PAGE_SIZE - 1, + .name = "gsbi_resource", + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device msm8960_device_uart_gsbi2 = { + .name = "msm_serial", + .id = 0, + .num_resources = ARRAY_SIZE(resources_uart_gsbi2), + .resource = resources_uart_gsbi2, +}; + +static struct resource resources_uart_gsbi5[] = { + { + .start = GSBI5_UARTDM_IRQ, + .end = GSBI5_UARTDM_IRQ, + .flags = IORESOURCE_IRQ, + }, + { + .start = MSM_UART5DM_PHYS, + .end = MSM_UART5DM_PHYS + PAGE_SIZE - 1, + .name = "uart_resource", + .flags = IORESOURCE_MEM, + }, + { + .start = MSM_GSBI5_PHYS, + .end = MSM_GSBI5_PHYS + PAGE_SIZE - 1, + .name = "gsbi_resource", + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device msm8960_device_uart_gsbi5 = { + .name = "msm_serial", + .id = 0, + .num_resources = ARRAY_SIZE(resources_uart_gsbi5), + .resource = resources_uart_gsbi5, +}; diff --git a/arch/arm/mach-msm/devices.h b/arch/arm/mach-msm/devices.h index 87c70bfce2b..e2643b340b2 100644 --- a/arch/arm/mach-msm/devices.h +++ b/arch/arm/mach-msm/devices.h @@ -22,6 +22,9 @@ extern struct platform_device msm_device_uart1; extern struct platform_device msm_device_uart2; extern struct platform_device msm_device_uart3; +extern struct platform_device msm8960_device_uart_gsbi2; +extern struct platform_device msm8960_device_uart_gsbi5; + extern struct platform_device msm_device_sdc1; extern struct platform_device msm_device_sdc2; extern struct platform_device msm_device_sdc3; -- cgit v1.2.3-18-g5258 From 4aa5f366431fef0afca0df348ca9782c63ac9911 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Fri, 21 Jan 2011 14:11:55 +0000 Subject: avr32: at32ap700x: specify DMA src and dst masters Now that the dw_dmac DMA driver supports configurable source and destination masters we need to specify which ones to use. This was previously hardcoded to 0 and 1 respectively in the driver. Acked-by: Hans-Christian Egtvedt Signed-off-by: Jamie Iles Signed-off-by: Dan Williams --- arch/avr32/mach-at32ap/at32ap700x.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index e67c9994542..2747cde8c9a 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -2048,6 +2048,8 @@ at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data, rx_dws->reg_width = DW_DMA_SLAVE_WIDTH_16BIT; rx_dws->cfg_hi = DWC_CFGH_SRC_PER(3); rx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL); + rx_dws->src_master = 0; + rx_dws->dst_master = 1; } /* Check if DMA slave interface for playback should be configured. */ @@ -2056,6 +2058,8 @@ at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data, tx_dws->reg_width = DW_DMA_SLAVE_WIDTH_16BIT; tx_dws->cfg_hi = DWC_CFGH_DST_PER(4); tx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL); + rx_dws->src_master = 0; + rx_dws->dst_master = 1; } if (platform_device_add_data(pdev, data, @@ -2128,6 +2132,8 @@ at32_add_device_abdac(unsigned int id, struct atmel_abdac_pdata *data) dws->reg_width = DW_DMA_SLAVE_WIDTH_32BIT; dws->cfg_hi = DWC_CFGH_DST_PER(2); dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL); + dws->src_master = 0; + dws->dst_master = 1; if (platform_device_add_data(pdev, data, sizeof(struct atmel_abdac_pdata))) -- cgit v1.2.3-18-g5258 From ac2c0a387194f45c759572b3462d1bf92ec92f00 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Tue, 25 Jan 2011 11:18:11 +0100 Subject: dma40: allow realtime and priority for event lines DB8500v2's DMA40 (revision 3) allows setting event lines as high priority and real time. Acked-by: Per Forlin Acked-by: Jonas Aaberg Signed-off-by: Rabin Vincent Signed-off-by: Linus Walleij Signed-off-by: Dan Williams --- arch/arm/plat-nomadik/include/plat/ste_dma40.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-nomadik/include/plat/ste_dma40.h b/arch/arm/plat-nomadik/include/plat/ste_dma40.h index 4d6dd4c39b7..8358f857a29 100644 --- a/arch/arm/plat-nomadik/include/plat/ste_dma40.h +++ b/arch/arm/plat-nomadik/include/plat/ste_dma40.h @@ -104,6 +104,8 @@ struct stedma40_half_channel_info { * * @dir: MEM 2 MEM, PERIPH 2 MEM , MEM 2 PERIPH, PERIPH 2 PERIPH * @high_priority: true if high-priority + * @realtime: true if realtime mode is to be enabled. Only available on DMA40 + * version 3+, i.e DB8500v2+ * @mode: channel mode: physical, logical, or operation * @mode_opt: options for the chosen channel mode * @src_dev_type: Src device type @@ -119,6 +121,7 @@ struct stedma40_half_channel_info { struct stedma40_chan_cfg { enum stedma40_xfer_dir dir; bool high_priority; + bool realtime; enum stedma40_mode mode; enum stedma40_mode_opt mode_opt; int src_dev_type; -- cgit v1.2.3-18-g5258 From 10a946b3a4e1ad665a81981cbe33c3d3903cd7da Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Tue, 25 Jan 2011 11:18:22 +0100 Subject: dma40: remove export of stedma40_memcpy_sg The dmaengine framework has the API for this now. Acked-by: Per Forlin Acked-by: Jonas Aaberg Signed-off-by: Rabin Vincent Signed-off-by: Linus Walleij Signed-off-by: Dan Williams --- arch/arm/plat-nomadik/include/plat/ste_dma40.h | 19 ------------------- 1 file changed, 19 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-nomadik/include/plat/ste_dma40.h b/arch/arm/plat-nomadik/include/plat/ste_dma40.h index 8358f857a29..c44886062f8 100644 --- a/arch/arm/plat-nomadik/include/plat/ste_dma40.h +++ b/arch/arm/plat-nomadik/include/plat/ste_dma40.h @@ -171,25 +171,6 @@ struct stedma40_platform_data { bool stedma40_filter(struct dma_chan *chan, void *data); -/** - * stedma40_memcpy_sg() - extension of the dma framework, memcpy to/from - * scattergatter lists. - * - * @chan: dmaengine handle - * @sgl_dst: Destination scatter list - * @sgl_src: Source scatter list - * @sgl_len: The length of each scatterlist. Both lists must be of equal length - * and each element must match the corresponding element in the other scatter - * list. - * @flags: is actually enum dma_ctrl_flags. See dmaengine.h - */ - -struct dma_async_tx_descriptor *stedma40_memcpy_sg(struct dma_chan *chan, - struct scatterlist *sgl_dst, - struct scatterlist *sgl_src, - unsigned int sgl_len, - unsigned long flags); - /** * stedma40_slave_mem() - Transfers a raw data buffer to or from a slave * (=device) -- cgit v1.2.3-18-g5258 From f1be77bb21120b5306b56d6854db1f8eb5c3678b Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Mon, 31 Jan 2011 11:30:04 +0100 Subject: [S390] pgtable_list corruption After page_table_free_rcu removed a page from the pgtable_list page_table_free better not add it again. Otherwise a page_table_alloc can reuse a page table fragment that is still in the rcu process. Signed-off-by: Martin Schwidefsky --- arch/s390/mm/pgtable.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c index 0c719c61972..e1850c28cd6 100644 --- a/arch/s390/mm/pgtable.c +++ b/arch/s390/mm/pgtable.c @@ -336,7 +336,8 @@ void page_table_free(struct mm_struct *mm, unsigned long *table) page->flags ^= bits; if (page->flags & FRAG_MASK) { /* Page now has some free pgtable fragments. */ - list_move(&page->lru, &mm->context.pgtable_list); + if (!list_empty(&page->lru)) + list_move(&page->lru, &mm->context.pgtable_list); page = NULL; } else /* All fragments of the 4K page have been freed. */ -- cgit v1.2.3-18-g5258 From e4d82692f4513ccf78de548b8ecea58adf03fa9a Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Mon, 31 Jan 2011 11:30:05 +0100 Subject: [S390] missing sacf in uaccess The uaccess functions copy_in_user_std and clear_user_std fail to switch back from secondary space mode to primary space mode with sacf in case of an unresolvable page fault. We need to make sure that the switch back to primary mode is done in all cases, otherwise the code following the uaccess inline assembly will crash. Reported-by: Alexander Graf Signed-off-by: Martin Schwidefsky --- arch/s390/lib/uaccess_std.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/s390/lib/uaccess_std.c b/arch/s390/lib/uaccess_std.c index 07deaeee14c..a6c4f7ed24a 100644 --- a/arch/s390/lib/uaccess_std.c +++ b/arch/s390/lib/uaccess_std.c @@ -125,9 +125,9 @@ static size_t copy_in_user_std(size_t size, void __user *to, unsigned long tmp1; asm volatile( + " sacf 256\n" " "AHI" %0,-1\n" " jo 5f\n" - " sacf 256\n" " bras %3,3f\n" "0:"AHI" %0,257\n" "1: mvc 0(1,%1),0(%2)\n" @@ -142,9 +142,8 @@ static size_t copy_in_user_std(size_t size, void __user *to, "3:"AHI" %0,-256\n" " jnm 2b\n" "4: ex %0,1b-0b(%3)\n" - " sacf 0\n" "5: "SLR" %0,%0\n" - "6:\n" + "6: sacf 0\n" EX_TABLE(1b,6b) EX_TABLE(2b,0b) EX_TABLE(4b,0b) : "+a" (size), "+a" (to), "+a" (from), "=a" (tmp1) : : "cc", "memory"); @@ -156,9 +155,9 @@ static size_t clear_user_std(size_t size, void __user *to) unsigned long tmp1, tmp2; asm volatile( + " sacf 256\n" " "AHI" %0,-1\n" " jo 5f\n" - " sacf 256\n" " bras %3,3f\n" " xc 0(1,%1),0(%1)\n" "0:"AHI" %0,257\n" @@ -178,9 +177,8 @@ static size_t clear_user_std(size_t size, void __user *to) "3:"AHI" %0,-256\n" " jnm 2b\n" "4: ex %0,0(%3)\n" - " sacf 0\n" "5: "SLR" %0,%0\n" - "6:\n" + "6: sacf 0\n" EX_TABLE(1b,6b) EX_TABLE(2b,0b) EX_TABLE(4b,0b) : "+a" (size), "+a" (to), "=a" (tmp1), "=a" (tmp2) : : "cc", "memory"); -- cgit v1.2.3-18-g5258 From c84ca00819e8a441d79c61883a275d8982f04cb2 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 31 Jan 2011 11:30:06 +0100 Subject: [S390] tlb: fix build error caused by THP Fix this build error with !CONFIG_SWAP caused by tranparent huge pages support: In file included from mm/pgtable-generic.c:9:0: /linux-2.6/arch/s390/include/asm/tlb.h: In function 'tlb_remove_page': /linux-2.6/arch/s390/include/asm/tlb.h:92:2: error: implicit declaration of function 'page_cache_release' Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/tlb.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/s390/include/asm/tlb.h b/arch/s390/include/asm/tlb.h index f1f644f2240..9074a54c4d1 100644 --- a/arch/s390/include/asm/tlb.h +++ b/arch/s390/include/asm/tlb.h @@ -22,6 +22,7 @@ */ #include +#include #include #include #include -- cgit v1.2.3-18-g5258 From 786cca889264836fad841757a1bf1bbaa7a16010 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Mon, 31 Jan 2011 11:30:07 +0100 Subject: [S390] use asm-generic/cacheflush.h The implementation of the cache flushing interfaces on the s390 is identical with the default implementation in asm-generic. Signed-off-by: Akinobu Mita Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/cacheflush.h | 23 +---------------------- 1 file changed, 1 insertion(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/s390/include/asm/cacheflush.h b/arch/s390/include/asm/cacheflush.h index 405cc97c624..7e1f7762062 100644 --- a/arch/s390/include/asm/cacheflush.h +++ b/arch/s390/include/asm/cacheflush.h @@ -1,29 +1,8 @@ #ifndef _S390_CACHEFLUSH_H #define _S390_CACHEFLUSH_H -/* Keep includes the same across arches. */ -#include - /* Caches aren't brain-dead on the s390. */ -#define flush_cache_all() do { } while (0) -#define flush_cache_mm(mm) do { } while (0) -#define flush_cache_dup_mm(mm) do { } while (0) -#define flush_cache_range(vma, start, end) do { } while (0) -#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) -#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0 -#define flush_dcache_page(page) do { } while (0) -#define flush_dcache_mmap_lock(mapping) do { } while (0) -#define flush_dcache_mmap_unlock(mapping) do { } while (0) -#define flush_icache_range(start, end) do { } while (0) -#define flush_icache_page(vma,pg) do { } while (0) -#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) -#define flush_cache_vmap(start, end) do { } while (0) -#define flush_cache_vunmap(start, end) do { } while (0) - -#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ - memcpy(dst, src, len) -#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ - memcpy(dst, src, len) +#include #ifdef CONFIG_DEBUG_PAGEALLOC void kernel_map_pages(struct page *page, int numpages, int enable); -- cgit v1.2.3-18-g5258 From d9c11b1e8aade25d7d75fb8f344e68e1301822e4 Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Mon, 31 Jan 2011 11:30:09 +0100 Subject: [S390] reset default for CONFIG_CHSC_SCH 6f9a3c33 "[S390] cleanup s390 Kconfig" accidentally changed the default for CONFIG_CHSC_SCH. Reset it to m. Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky --- arch/s390/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index ff19efdf6fe..636bcb81d06 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -406,7 +406,7 @@ config QDIO If unsure, say Y. config CHSC_SCH - def_tristate y + def_tristate m prompt "Support for CHSC subchannels" help This driver allows usage of CHSC subchannels. A CHSC subchannel -- cgit v1.2.3-18-g5258 From 1340f3e0b29b745a33f431455c3a37f48197bc81 Mon Sep 17 00:00:00 2001 From: Torben Hohn Date: Thu, 27 Jan 2011 15:59:15 +0100 Subject: alpha: Change do_timer() to xtime_update() xtime_update() takes the xtime_lock itself. timer_interrupt() is only called on the boot cpu. See do_entInt(). So "state" in timer_interrupt does not require protection by xtime_lock. Signed-off-by: Torben Hohn Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: Matt Turner Cc: Peter Zijlstra Cc: johnstul@us.ibm.com Cc: hch@infradead.org Cc: yong.zhang0@gmail.com LKML-Reference: <20110127145915.23248.20919.stgit@localhost> Signed-off-by: Thomas Gleixner --- arch/alpha/kernel/time.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/alpha/kernel/time.c b/arch/alpha/kernel/time.c index c1f3e7cb82a..a58e84f1a63 100644 --- a/arch/alpha/kernel/time.c +++ b/arch/alpha/kernel/time.c @@ -159,7 +159,7 @@ void read_persistent_clock(struct timespec *ts) /* * timer_interrupt() needs to keep up the real-time clock, - * as well as call the "do_timer()" routine every clocktick + * as well as call the "xtime_update()" routine every clocktick */ irqreturn_t timer_interrupt(int irq, void *dev) { @@ -172,8 +172,6 @@ irqreturn_t timer_interrupt(int irq, void *dev) profile_tick(CPU_PROFILING); #endif - write_seqlock(&xtime_lock); - /* * Calculate how many ticks have passed since the last update, * including any previous partial leftover. Save any resulting @@ -187,9 +185,7 @@ irqreturn_t timer_interrupt(int irq, void *dev) nticks = delta >> FIX_SHIFT; if (nticks) - do_timer(nticks); - - write_sequnlock(&xtime_lock); + xtime_update(nticks); if (test_irq_work_pending()) { clear_irq_work_pending(); -- cgit v1.2.3-18-g5258 From 6906e33cc555c390cd091f6f363b783322dfedf6 Mon Sep 17 00:00:00 2001 From: Torben Hohn Date: Thu, 27 Jan 2011 15:59:21 +0100 Subject: arm: Switch from do_timer() to xtime_update() xtime_update takes the xtime_lock itself. Signed-off-by: Torben Hohn Cc: Russell King Cc: Peter Zijlstra Cc: johnstul@us.ibm.com Cc: hch@infradead.org Cc: yong.zhang0@gmail.com LKML-Reference: <20110127145920.23248.75541.stgit@localhost> Signed-off-by: Thomas Gleixner --- arch/arm/kernel/time.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index 3d76bf23373..1ff46cabc7e 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -107,9 +107,7 @@ void timer_tick(void) { profile_tick(CPU_PROFILING); do_leds(); - write_seqlock(&xtime_lock); - do_timer(1); - write_sequnlock(&xtime_lock); + xtime_update(1); #ifndef CONFIG_SMP update_process_times(user_mode(get_irq_regs())); #endif -- cgit v1.2.3-18-g5258 From ec2dff2febf19ff2109c2eb3e56d5a969fe399e2 Mon Sep 17 00:00:00 2001 From: Torben Hohn Date: Thu, 27 Jan 2011 15:59:26 +0100 Subject: arm/mach-clps711x: Switch do_timer() to xtime_update() do_timer() requires holding the xtime_lock, which this code did not do. Use the safe version xtime_update() Signed-off-by: Torben Hohn Cc: Russell King Cc: Peter Zijlstra Cc: johnstul@us.ibm.com Cc: hch@infradead.org Cc: yong.zhang0@gmail.com LKML-Reference: <20110127145926.23248.56369.stgit@localhost> Signed-off-by: Thomas Gleixner --- arch/arm/mach-clps711x/include/mach/time.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-clps711x/include/mach/time.h b/arch/arm/mach-clps711x/include/mach/time.h index 8fe283ccd1f..61fef9129c6 100644 --- a/arch/arm/mach-clps711x/include/mach/time.h +++ b/arch/arm/mach-clps711x/include/mach/time.h @@ -30,7 +30,7 @@ p720t_timer_interrupt(int irq, void *dev_id) { struct pt_regs *regs = get_irq_regs(); do_leds(); - do_timer(1); + xtime_update(1); #ifndef CONFIG_SMP update_process_times(user_mode(regs)); #endif -- cgit v1.2.3-18-g5258 From 4196b892d55caaf2c98da05e80472ca482ca19fe Mon Sep 17 00:00:00 2001 From: Torben Hohn Date: Thu, 27 Jan 2011 15:59:31 +0100 Subject: blackfin: Switch from do_timer() to xtime_update() xtime_update() takes the xtime_lock itself. Signed-off-by: Torben Hohn Cc: Mike Frysinger Cc: Peter Zijlstra Cc: johnstul@us.ibm.com Cc: hch@infradead.org Cc: yong.zhang0@gmail.com LKML-Reference: <20110127145931.23248.33917.stgit@localhost> Signed-off-by: Thomas Gleixner --- arch/blackfin/kernel/time.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c index c9113619029..8d73724c009 100644 --- a/arch/blackfin/kernel/time.c +++ b/arch/blackfin/kernel/time.c @@ -114,16 +114,14 @@ u32 arch_gettimeoffset(void) /* * timer_interrupt() needs to keep up the real-time clock, - * as well as call the "do_timer()" routine every clocktick + * as well as call the "xtime_update()" routine every clocktick */ #ifdef CONFIG_CORE_TIMER_IRQ_L1 __attribute__((l1_text)) #endif irqreturn_t timer_interrupt(int irq, void *dummy) { - write_seqlock(&xtime_lock); - do_timer(1); - write_sequnlock(&xtime_lock); + xtime_update(1); #ifdef CONFIG_IPIPE update_root_process_times(get_irq_regs()); -- cgit v1.2.3-18-g5258 From 17588b99183ece563013622afeefd37eb8e68fd3 Mon Sep 17 00:00:00 2001 From: Torben Hohn Date: Thu, 27 Jan 2011 15:59:36 +0100 Subject: cris: arch-v10: Switch do_timer() to xtime_update() This code failed to take the xtime_lock, which must be held when calling do_timer(). Use the safe version xtime_update() Signed-off-by: Torben Hohn Cc: hch@infradead.org Cc: Jesper Nilsson Cc: Peter Zijlstra Cc: johnstul@us.ibm.com Cc: Mikael Starvik Cc: yong.zhang0@gmail.com LKML-Reference: <20110127145936.23248.16192.stgit@localhost> Signed-off-by: Thomas Gleixner --- arch/cris/arch-v10/kernel/time.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/cris/arch-v10/kernel/time.c b/arch/cris/arch-v10/kernel/time.c index 00eb36f8deb..20c85b5dc7d 100644 --- a/arch/cris/arch-v10/kernel/time.c +++ b/arch/cris/arch-v10/kernel/time.c @@ -140,7 +140,7 @@ stop_watchdog(void) /* * timer_interrupt() needs to keep up the real-time clock, - * as well as call the "do_timer()" routine every clocktick + * as well as call the "xtime_update()" routine every clocktick */ //static unsigned short myjiff; /* used by our debug routine print_timestamp */ @@ -176,7 +176,7 @@ timer_interrupt(int irq, void *dev_id) /* call the real timer interrupt handler */ - do_timer(1); + xtime_update(1); cris_do_profile(regs); /* Save profiling information */ return IRQ_HANDLED; -- cgit v1.2.3-18-g5258 From 36cb07bb8118cb14211ef25c58026f005877c47d Mon Sep 17 00:00:00 2001 From: Torben Hohn Date: Thu, 27 Jan 2011 15:59:41 +0100 Subject: cris: arch-v32: Switch do_timer() to xtime_update() xtime_update() takes the xtime_lock itself. Signed-off-by: Torben Hohn Cc: hch@infradead.org Cc: Jesper Nilsson Cc: Peter Zijlstra Cc: johnstul@us.ibm.com Cc: Mikael Starvik Cc: yong.zhang0@gmail.com LKML-Reference: <20110127145941.23248.92547.stgit@localhost> Signed-off-by: Thomas Gleixner --- arch/cris/arch-v32/kernel/time.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/cris/arch-v32/kernel/time.c b/arch/cris/arch-v32/kernel/time.c index a545211e999..bb978ede898 100644 --- a/arch/cris/arch-v32/kernel/time.c +++ b/arch/cris/arch-v32/kernel/time.c @@ -183,7 +183,7 @@ void handle_watchdog_bite(struct pt_regs *regs) /* * timer_interrupt() needs to keep up the real-time clock, - * as well as call the "do_timer()" routine every clocktick. + * as well as call the "xtime_update()" routine every clocktick. */ extern void cris_do_profile(struct pt_regs *regs); @@ -216,9 +216,7 @@ static inline irqreturn_t timer_interrupt(int irq, void *dev_id) return IRQ_HANDLED; /* Call the real timer interrupt handler */ - write_seqlock(&xtime_lock); - do_timer(1); - write_sequnlock(&xtime_lock); + xtime_update(1); return IRQ_HANDLED; } -- cgit v1.2.3-18-g5258 From 57464bd87f708e75b47312766e3fc8dc3aaf66ad Mon Sep 17 00:00:00 2001 From: Torben Hohn Date: Thu, 27 Jan 2011 15:59:46 +0100 Subject: frv: Switch do_timer() to xtime_update() __set_LEDS() does not need to be protected by xtime_lock. its used unprotected in other places. [ tglx: Removed stale comment ] Signed-off-by: Torben Hohn Cc: hch@infradead.org Cc: Peter Zijlstra Cc: johnstul@us.ibm.com Cc: David Howells Cc: yong.zhang0@gmail.com LKML-Reference: <20110127145946.23248.57952.stgit@localhost> Signed-off-by: Thomas Gleixner --- arch/frv/kernel/time.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/frv/kernel/time.c b/arch/frv/kernel/time.c index 0ddbbae83cb..b457de496b7 100644 --- a/arch/frv/kernel/time.c +++ b/arch/frv/kernel/time.c @@ -50,21 +50,13 @@ static struct irqaction timer_irq = { /* * timer_interrupt() needs to keep up the real-time clock, - * as well as call the "do_timer()" routine every clocktick + * as well as call the "xtime_update()" routine every clocktick */ static irqreturn_t timer_interrupt(int irq, void *dummy) { profile_tick(CPU_PROFILING); - /* - * Here we are in the timer irq handler. We just have irqs locally - * disabled but we don't know if the timer_bh is running on the other - * CPU. We need to avoid to SMP race with it. NOTE: we don't need - * the irq version of write_lock because as just said we have irq - * locally disabled. -arca - */ - write_seqlock(&xtime_lock); - do_timer(1); + xtime_update(1); #ifdef CONFIG_HEARTBEAT static unsigned short n; @@ -72,8 +64,6 @@ static irqreturn_t timer_interrupt(int irq, void *dummy) __set_LEDS(n); #endif /* CONFIG_HEARTBEAT */ - write_sequnlock(&xtime_lock); - update_process_times(user_mode(get_irq_regs())); return IRQ_HANDLED; -- cgit v1.2.3-18-g5258 From daad8b581e7f5e21a2f79e49d57d4f6a73b26510 Mon Sep 17 00:00:00 2001 From: Torben Hohn Date: Thu, 27 Jan 2011 15:59:51 +0100 Subject: h8300: Switch do_timer() to xtime_update() xtime_update() takes the xtime_lock itself. Signed-off-by: Torben Hohn Cc: Yoshinori Sato Cc: Peter Zijlstra Cc: johnstul@us.ibm.com Cc: hch@infradead.org Cc: yong.zhang0@gmail.com LKML-Reference: <20110127145951.23248.92727.stgit@localhost> Signed-off-by: Thomas Gleixner --- arch/h8300/kernel/time.c | 4 +--- arch/h8300/kernel/timer/timer8.c | 2 +- 2 files changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/h8300/kernel/time.c b/arch/h8300/kernel/time.c index 165005aff9d..32263a138aa 100644 --- a/arch/h8300/kernel/time.c +++ b/arch/h8300/kernel/time.c @@ -35,9 +35,7 @@ void h8300_timer_tick(void) { if (current->pid) profile_tick(CPU_PROFILING); - write_seqlock(&xtime_lock); - do_timer(1); - write_sequnlock(&xtime_lock); + xtime_update(1); update_process_times(user_mode(get_irq_regs())); } diff --git a/arch/h8300/kernel/timer/timer8.c b/arch/h8300/kernel/timer/timer8.c index 3946c0fa837..7a1533fad47 100644 --- a/arch/h8300/kernel/timer/timer8.c +++ b/arch/h8300/kernel/timer/timer8.c @@ -61,7 +61,7 @@ /* * timer_interrupt() needs to keep up the real-time clock, - * as well as call the "do_timer()" routine every clocktick + * as well as call the "xtime_update()" routine every clocktick */ static irqreturn_t timer_interrupt(int irq, void *dev_id) -- cgit v1.2.3-18-g5258 From 1aabd67d2e97e6affdf5a7c65f442ac91ace3f85 Mon Sep 17 00:00:00 2001 From: Torben Hohn Date: Thu, 27 Jan 2011 15:59:56 +0100 Subject: ia64: Switch do_timer() to xtime_update() local_cpu_data->itm_next = new_itm; does not need to be protected by xtime_lock. xtime_update() takes the lock itself. Signed-off-by: Torben Hohn Cc: Fenghua Yu Cc: Tony Luck Cc: Peter Zijlstra Cc: johnstul@us.ibm.com Cc: hch@infradead.org Cc: yong.zhang0@gmail.com LKML-Reference: <20110127145956.23248.49107.stgit@localhost> Signed-off-by: Thomas Gleixner --- arch/ia64/kernel/time.c | 19 +++++-------------- arch/ia64/xen/time.c | 13 +++++-------- 2 files changed, 10 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c index 9702fa92489..156ad803d5b 100644 --- a/arch/ia64/kernel/time.c +++ b/arch/ia64/kernel/time.c @@ -190,19 +190,10 @@ timer_interrupt (int irq, void *dev_id) new_itm += local_cpu_data->itm_delta; - if (smp_processor_id() == time_keeper_id) { - /* - * Here we are in the timer irq handler. We have irqs locally - * disabled, but we don't know if the timer_bh is running on - * another CPU. We need to avoid to SMP race by acquiring the - * xtime_lock. - */ - write_seqlock(&xtime_lock); - do_timer(1); - local_cpu_data->itm_next = new_itm; - write_sequnlock(&xtime_lock); - } else - local_cpu_data->itm_next = new_itm; + if (smp_processor_id() == time_keeper_id) + xtime_update(1); + + local_cpu_data->itm_next = new_itm; if (time_after(new_itm, ia64_get_itc())) break; @@ -222,7 +213,7 @@ skip_process_time_accounting: * comfort, we increase the safety margin by * intentionally dropping the next tick(s). We do NOT * update itm.next because that would force us to call - * do_timer() which in turn would let our clock run + * xtime_update() which in turn would let our clock run * too fast (with the potentially devastating effect * of losing monotony of time). */ diff --git a/arch/ia64/xen/time.c b/arch/ia64/xen/time.c index c1c544513e8..1f8244a78be 100644 --- a/arch/ia64/xen/time.c +++ b/arch/ia64/xen/time.c @@ -139,14 +139,11 @@ consider_steal_time(unsigned long new_itm) run_posix_cpu_timers(p); delta_itm += local_cpu_data->itm_delta * (stolen + blocked); - if (cpu == time_keeper_id) { - write_seqlock(&xtime_lock); - do_timer(stolen + blocked); - local_cpu_data->itm_next = delta_itm + new_itm; - write_sequnlock(&xtime_lock); - } else { - local_cpu_data->itm_next = delta_itm + new_itm; - } + if (cpu == time_keeper_id) + xtime_update(stolen + blocked); + + local_cpu_data->itm_next = delta_itm + new_itm; + per_cpu(xen_stolen_time, cpu) += NS_PER_TICK * stolen; per_cpu(xen_blocked_time, cpu) += NS_PER_TICK * blocked; } -- cgit v1.2.3-18-g5258 From 7bde2ab7cb51f14c6f6574f0f5a78445f2caed3e Mon Sep 17 00:00:00 2001 From: Torben Hohn Date: Thu, 27 Jan 2011 16:00:01 +0100 Subject: m32r: Switch from do_timer() to xtime_update() xtime_update() does proper locking. Signed-off-by: Torben Hohn Cc: Peter Zijlstra Cc: johnstul@us.ibm.com Cc: Hirokazu Takata Cc: hch@infradead.org Cc: yong.zhang0@gmail.com LKML-Reference: <20110127150001.23248.68620.stgit@localhost> Signed-off-by: Thomas Gleixner --- arch/m32r/kernel/time.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/m32r/kernel/time.c b/arch/m32r/kernel/time.c index bda86820bff..84dd04048db 100644 --- a/arch/m32r/kernel/time.c +++ b/arch/m32r/kernel/time.c @@ -107,15 +107,14 @@ u32 arch_gettimeoffset(void) /* * timer_interrupt() needs to keep up the real-time clock, - * as well as call the "do_timer()" routine every clocktick + * as well as call the "xtime_update()" routine every clocktick */ static irqreturn_t timer_interrupt(int irq, void *dev_id) { #ifndef CONFIG_SMP profile_tick(CPU_PROFILING); #endif - /* XXX FIXME. Uh, the xtime_lock should be held here, no? */ - do_timer(1); + xtime_update(1); #ifndef CONFIG_SMP update_process_times(user_mode(get_irq_regs())); -- cgit v1.2.3-18-g5258 From e53f276beb655c711a5d1f25f800b61aa976e34f Mon Sep 17 00:00:00 2001 From: Torben Hohn Date: Thu, 27 Jan 2011 16:00:06 +0100 Subject: m68k: Switch do_timer() to xtime_update() xtime_update() properly takes the xtime_lock Signed-off-by: Torben Hohn Cc: Sam Creasey Cc: Peter Zijlstra Cc: johnstul@us.ibm.com Cc: Roman Zippel Cc: hch@infradead.org Cc: yong.zhang0@gmail.com Cc: Geert Uytterhoeven Cc: Greg Ungerer LKML-Reference: <20110127150006.23248.71790.stgit@localhost> Signed-off-by: Thomas Gleixner --- arch/m68k/bvme6000/config.c | 4 ++-- arch/m68k/kernel/time.c | 4 ++-- arch/m68k/mvme147/config.c | 4 ++-- arch/m68k/mvme16x/config.c | 4 ++-- arch/m68k/sun3/sun3ints.c | 2 +- arch/m68knommu/kernel/time.c | 8 ++------ 6 files changed, 11 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/m68k/bvme6000/config.c b/arch/m68k/bvme6000/config.c index 9fe6fefb5e1..1edd95095cb 100644 --- a/arch/m68k/bvme6000/config.c +++ b/arch/m68k/bvme6000/config.c @@ -45,8 +45,8 @@ extern int bvme6000_set_clock_mmss (unsigned long); extern void bvme6000_reset (void); void bvme6000_set_vectors (void); -/* Save tick handler routine pointer, will point to do_timer() in - * kernel/sched.c, called via bvme6000_process_int() */ +/* Save tick handler routine pointer, will point to xtime_update() in + * kernel/timer/timekeeping.c, called via bvme6000_process_int() */ static irq_handler_t tick_handler; diff --git a/arch/m68k/kernel/time.c b/arch/m68k/kernel/time.c index 06438dac08f..18b34ee5db3 100644 --- a/arch/m68k/kernel/time.c +++ b/arch/m68k/kernel/time.c @@ -37,11 +37,11 @@ static inline int set_rtc_mmss(unsigned long nowtime) /* * timer_interrupt() needs to keep up the real-time clock, - * as well as call the "do_timer()" routine every clocktick + * as well as call the "xtime_update()" routine every clocktick */ static irqreturn_t timer_interrupt(int irq, void *dummy) { - do_timer(1); + xtime_update(1); update_process_times(user_mode(get_irq_regs())); profile_tick(CPU_PROFILING); diff --git a/arch/m68k/mvme147/config.c b/arch/m68k/mvme147/config.c index 100baaa692a..6cb9c3a9b6c 100644 --- a/arch/m68k/mvme147/config.c +++ b/arch/m68k/mvme147/config.c @@ -46,8 +46,8 @@ extern void mvme147_reset (void); static int bcd2int (unsigned char b); -/* Save tick handler routine pointer, will point to do_timer() in - * kernel/sched.c, called via mvme147_process_int() */ +/* Save tick handler routine pointer, will point to xtime_update() in + * kernel/time/timekeeping.c, called via mvme147_process_int() */ irq_handler_t tick_handler; diff --git a/arch/m68k/mvme16x/config.c b/arch/m68k/mvme16x/config.c index 11edf61cc2c..0b28e262165 100644 --- a/arch/m68k/mvme16x/config.c +++ b/arch/m68k/mvme16x/config.c @@ -51,8 +51,8 @@ extern void mvme16x_reset (void); int bcd2int (unsigned char b); -/* Save tick handler routine pointer, will point to do_timer() in - * kernel/sched.c, called via mvme16x_process_int() */ +/* Save tick handler routine pointer, will point to xtime_update() in + * kernel/time/timekeeping.c, called via mvme16x_process_int() */ static irq_handler_t tick_handler; diff --git a/arch/m68k/sun3/sun3ints.c b/arch/m68k/sun3/sun3ints.c index 2d9e21bd313..6464ad3ae3e 100644 --- a/arch/m68k/sun3/sun3ints.c +++ b/arch/m68k/sun3/sun3ints.c @@ -66,7 +66,7 @@ static irqreturn_t sun3_int5(int irq, void *dev_id) #ifdef CONFIG_SUN3 intersil_clear(); #endif - do_timer(1); + xtime_update(1); update_process_times(user_mode(get_irq_regs())); if (!(kstat_cpu(0).irqs[irq] % 20)) sun3_leds(led_pattern[(kstat_cpu(0).irqs[irq] % 160) / 20]); diff --git a/arch/m68knommu/kernel/time.c b/arch/m68knommu/kernel/time.c index d6ac2a43453..6623909f70e 100644 --- a/arch/m68knommu/kernel/time.c +++ b/arch/m68knommu/kernel/time.c @@ -36,7 +36,7 @@ static inline int set_rtc_mmss(unsigned long nowtime) #ifndef CONFIG_GENERIC_CLOCKEVENTS /* * timer_interrupt() needs to keep up the real-time clock, - * as well as call the "do_timer()" routine every clocktick + * as well as call the "xtime_update()" routine every clocktick */ irqreturn_t arch_timer_interrupt(int irq, void *dummy) { @@ -44,11 +44,7 @@ irqreturn_t arch_timer_interrupt(int irq, void *dummy) if (current->pid) profile_tick(CPU_PROFILING); - write_seqlock(&xtime_lock); - - do_timer(1); - - write_sequnlock(&xtime_lock); + xtime_update(1); update_process_times(user_mode(get_irq_regs())); -- cgit v1.2.3-18-g5258 From bb1dfc1cf6c51ca42f7c05029a6f06df9092a0fc Mon Sep 17 00:00:00 2001 From: Torben Hohn Date: Thu, 27 Jan 2011 16:00:17 +0100 Subject: parisc: Switch do_timer() to xtime_update() xtime_update() takes the xtime_lock itself. Signed-off-by: Torben Hohn Cc: hch@infradead.org Cc: Peter Zijlstra Cc: johnstul@us.ibm.com Cc: Helge Deller Cc: "James E.J. Bottomley" Cc: Kyle McMartin Cc: yong.zhang0@gmail.com LKML-Reference: <20110127150017.23248.22559.stgit@localhost> Signed-off-by: Thomas Gleixner --- arch/parisc/kernel/time.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c index 05511ccb61d..45b7389d77a 100644 --- a/arch/parisc/kernel/time.c +++ b/arch/parisc/kernel/time.c @@ -162,11 +162,8 @@ irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id) update_process_times(user_mode(get_irq_regs())); } - if (cpu == 0) { - write_seqlock(&xtime_lock); - do_timer(ticks_elapsed); - write_sequnlock(&xtime_lock); - } + if (cpu == 0) + xtime_update(ticks_elapsed); return IRQ_HANDLED; } -- cgit v1.2.3-18-g5258 From 4ea1b72551d052a3993ef72ce06ecf5bdd125859 Mon Sep 17 00:00:00 2001 From: Torben Hohn Date: Thu, 27 Jan 2011 16:00:22 +0100 Subject: sparc: Switch do_timer() to xtime_update() xtime_update() takes the xtime_lock itself. pcic_clear_clock_irq() and clear_clock_irq do not need to be protected by xtime_lock. Signed-off-by: Torben Hohn Acked-by: David S. Miller Cc: Peter Zijlstra Cc: johnstul@us.ibm.com Cc: hch@infradead.org Cc: yong.zhang0@gmail.com LKML-Reference: <20110127150022.23248.80369.stgit@localhost> Signed-off-by: Thomas Gleixner --- arch/sparc/kernel/pcic.c | 4 +--- arch/sparc/kernel/time_32.c | 9 ++------- 2 files changed, 3 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c index aeaa09a3c65..2cdc131b50a 100644 --- a/arch/sparc/kernel/pcic.c +++ b/arch/sparc/kernel/pcic.c @@ -700,10 +700,8 @@ static void pcic_clear_clock_irq(void) static irqreturn_t pcic_timer_handler (int irq, void *h) { - write_seqlock(&xtime_lock); /* Dummy, to show that we remember */ pcic_clear_clock_irq(); - do_timer(1); - write_sequnlock(&xtime_lock); + xtime_update(1); #ifndef CONFIG_SMP update_process_times(user_mode(get_irq_regs())); #endif diff --git a/arch/sparc/kernel/time_32.c b/arch/sparc/kernel/time_32.c index 9c743b1886f..4211bfc9bca 100644 --- a/arch/sparc/kernel/time_32.c +++ b/arch/sparc/kernel/time_32.c @@ -85,7 +85,7 @@ int update_persistent_clock(struct timespec now) /* * timer_interrupt() needs to keep up the real-time clock, - * as well as call the "do_timer()" routine every clocktick + * as well as call the "xtime_update()" routine every clocktick */ #define TICK_SIZE (tick_nsec / 1000) @@ -96,14 +96,9 @@ static irqreturn_t timer_interrupt(int dummy, void *dev_id) profile_tick(CPU_PROFILING); #endif - /* Protect counter clear so that do_gettimeoffset works */ - write_seqlock(&xtime_lock); - clear_clock_irq(); - do_timer(1); - - write_sequnlock(&xtime_lock); + xtime_update(1); #ifndef CONFIG_SMP update_process_times(user_mode(get_irq_regs())); -- cgit v1.2.3-18-g5258 From d12b0e24c56c6fb2398609f26858e5278d688840 Mon Sep 17 00:00:00 2001 From: Torben Hohn Date: Thu, 27 Jan 2011 16:00:27 +0100 Subject: xtensa: Switch do_timer() to xtime_update() xtime_update() takes the xtime_lock itself. set_linux_timer() does not need to be protected by xtime_lock. [ tglx: This code is broken on SMP anyway. ] Signed-off-by: Torben Hohn Cc: Chris Zankel Cc: Peter Zijlstra Cc: johnstul@us.ibm.com Cc: hch@infradead.org Cc: yong.zhang0@gmail.com LKML-Reference: <20110127150027.23248.61798.stgit@localhost> Signed-off-by: Thomas Gleixner --- arch/xtensa/kernel/time.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c index 19df764f639..f3e5eb43f71 100644 --- a/arch/xtensa/kernel/time.c +++ b/arch/xtensa/kernel/time.c @@ -96,16 +96,12 @@ again: update_process_times(user_mode(get_irq_regs())); #endif - write_seqlock(&xtime_lock); - - do_timer(1); /* Linux handler in kernel/timer.c */ + xtime_update(1); /* Linux handler in kernel/time/timekeeping */ /* Note that writing CCOMPARE clears the interrupt. */ next += CCOUNT_PER_JIFFY; set_linux_timer(next); - - write_sequnlock(&xtime_lock); } /* Allow platform to do something useful (Wdog). */ -- cgit v1.2.3-18-g5258 From 4e8d76373c9fd7a1c1b401fc97ba01c0ecbb888f Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 28 Jan 2011 21:00:39 +0000 Subject: ARM: footbridge: convert to clockevents/clocksource The Footbridge platforms have some reasonable timers in the host bridge, which we use for most footbridge-based platforms. However, NetWinder's clock these using a spread-spectrum clock which makes them too unstable for time keeping. So we have to rely on the PIT. Convert both Footbridge timers and PIT timers to use the clocksource and clockevent infrastructure. Tested on Netwinder. Signed-off-by: Russell King --- arch/arm/Kconfig | 2 +- arch/arm/mach-footbridge/dc21285-timer.c | 84 +++++++++++++++----- arch/arm/mach-footbridge/isa-timer.c | 129 ++++++++++++++++++++----------- 3 files changed, 152 insertions(+), 63 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5cff165b7eb..6d9fbfe32a2 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -346,7 +346,7 @@ config ARCH_FOOTBRIDGE bool "FootBridge" select CPU_SA110 select FOOTBRIDGE - select ARCH_USES_GETTIMEOFFSET + select GENERIC_CLOCKEVENTS help Support for systems based on the DC21285 companion chip ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. diff --git a/arch/arm/mach-footbridge/dc21285-timer.c b/arch/arm/mach-footbridge/dc21285-timer.c index bc5e83fb581..a921fe92b85 100644 --- a/arch/arm/mach-footbridge/dc21285-timer.c +++ b/arch/arm/mach-footbridge/dc21285-timer.c @@ -4,10 +4,11 @@ * Copyright (C) 1998 Russell King. * Copyright (C) 1998 Phil Blundell */ +#include +#include #include #include #include -#include #include @@ -16,32 +17,76 @@ #include "common.h" -/* - * Footbridge timer 1 support. - */ -static unsigned long timer1_latch; +static cycle_t cksrc_dc21285_read(struct clocksource *cs) +{ + return cs->mask - *CSR_TIMER2_VALUE; +} -static unsigned long timer1_gettimeoffset (void) +static int cksrc_dc21285_enable(struct clocksource *cs) { - unsigned long value = timer1_latch - *CSR_TIMER1_VALUE; + *CSR_TIMER2_LOAD = cs->mask; + *CSR_TIMER2_CLR = 0; + *CSR_TIMER2_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_DIV16; + return 0; +} - return ((tick_nsec / 1000) * value) / timer1_latch; +static int cksrc_dc21285_disable(struct clocksource *cs) +{ + *CSR_TIMER2_CNTL = 0; } -static irqreturn_t -timer1_interrupt(int irq, void *dev_id) +static struct clocksource cksrc_dc21285 = { + .name = "dc21285_timer2", + .rating = 200, + .read = cksrc_dc21285_read, + .enable = cksrc_dc21285_enable, + .disable = cksrc_dc21285_disable, + .mask = CLOCKSOURCE_MASK(24), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static void ckevt_dc21285_set_mode(enum clock_event_mode mode, + struct clock_event_device *c) { + switch (mode) { + case CLOCK_EVT_MODE_RESUME: + case CLOCK_EVT_MODE_PERIODIC: + *CSR_TIMER1_CLR = 0; + *CSR_TIMER1_LOAD = (mem_fclk_21285 + 8 * HZ) / (16 * HZ); + *CSR_TIMER1_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_AUTORELOAD | + TIMER_CNTL_DIV16; + break; + + default: + *CSR_TIMER1_CNTL = 0; + break; + } +} + +static struct clock_event_device ckevt_dc21285 = { + .name = "dc21285_timer1", + .features = CLOCK_EVT_FEAT_PERIODIC, + .rating = 200, + .irq = IRQ_TIMER1, + .set_mode = ckevt_dc21285_set_mode, +}; + +static irqreturn_t timer1_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *ce = dev_id; + *CSR_TIMER1_CLR = 0; - timer_tick(); + ce->event_handler(ce); return IRQ_HANDLED; } static struct irqaction footbridge_timer_irq = { - .name = "Timer1 timer tick", + .name = "dc21285_timer1", .handler = timer1_interrupt, .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .dev_id = &ckevt_dc21285, }; /* @@ -49,16 +94,19 @@ static struct irqaction footbridge_timer_irq = { */ static void __init footbridge_timer_init(void) { - timer1_latch = (mem_fclk_21285 + 8 * HZ) / (16 * HZ); + struct clock_event_device *ce = &ckevt_dc21285; + + clocksource_register_hz(&cksrc_dc21285, (mem_fclk_21285 + 8) / 16); + + setup_irq(ce->irq, &footbridge_timer_irq); - *CSR_TIMER1_CLR = 0; - *CSR_TIMER1_LOAD = timer1_latch; - *CSR_TIMER1_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_AUTORELOAD | TIMER_CNTL_DIV16; + clockevents_calc_mult_shift(ce, mem_fclk_21285, 5); + ce->max_delta_ns = clockevent_delta2ns(0xffffff, ce); + ce->min_delta_ns = clockevent_delta2ns(0x000004, ce); - setup_irq(IRQ_TIMER1, &footbridge_timer_irq); + clockevents_register_device(ce); } struct sys_timer footbridge_timer = { .init = footbridge_timer_init, - .offset = timer1_gettimeoffset, }; diff --git a/arch/arm/mach-footbridge/isa-timer.c b/arch/arm/mach-footbridge/isa-timer.c index f488fa2082d..441c6ce0d55 100644 --- a/arch/arm/mach-footbridge/isa-timer.c +++ b/arch/arm/mach-footbridge/isa-timer.c @@ -4,10 +4,13 @@ * Copyright (C) 1998 Russell King. * Copyright (C) 1998 Phil Blundell */ +#include +#include #include #include #include #include +#include #include @@ -15,77 +18,115 @@ #include "common.h" -/* - * ISA timer tick support - */ -#define mSEC_10_from_14 ((14318180 + 100) / 200) +#define PIT_MODE 0x43 +#define PIT_CH0 0x40 + +#define PIT_LATCH ((PIT_TICK_RATE + HZ / 2) / HZ) -static unsigned long isa_gettimeoffset(void) +static cycle_t pit_read(struct clocksource *cs) { + unsigned long flags; + static int old_count; + static u32 old_jifs; int count; + u32 jifs; - static int count_p = (mSEC_10_from_14/6); /* for the first call after boot */ - static unsigned long jiffies_p = 0; + raw_local_irq_save(flags); - /* - * cache volatile jiffies temporarily; we have IRQs turned off. - */ - unsigned long jiffies_t; + jifs = jiffies; + outb_p(0x00, PIT_MODE); /* latch the count */ + count = inb_p(PIT_CH0); /* read the latched count */ + count |= inb_p(PIT_CH0) << 8; - /* timer count may underflow right here */ - outb_p(0x00, 0x43); /* latch the count ASAP */ + if (count > old_count && jifs == old_jifs) + count = old_count; - count = inb_p(0x40); /* read the latched count */ + old_count = count; + old_jifs = jifs; - /* - * We do this guaranteed double memory access instead of a _p - * postfix in the previous port access. Wheee, hackady hack - */ - jiffies_t = jiffies; + raw_local_irq_restore(flags); - count |= inb_p(0x40) << 8; + count = (PIT_LATCH - 1) - count; - /* Detect timer underflows. If we haven't had a timer tick since - the last time we were called, and time is apparently going - backwards, the counter must have wrapped during this routine. */ - if ((jiffies_t == jiffies_p) && (count > count_p)) - count -= (mSEC_10_from_14/6); - else - jiffies_p = jiffies_t; + return (cycle_t)(jifs * PIT_LATCH) + count; +} - count_p = count; +static struct clocksource pit_cs = { + .name = "pit", + .rating = 110, + .read = pit_read, + .mask = CLOCKSOURCE_MASK(32), +}; - count = (((mSEC_10_from_14/6)-1) - count) * (tick_nsec / 1000); - count = (count + (mSEC_10_from_14/6)/2) / (mSEC_10_from_14/6); +static void pit_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + unsigned long flags; + + raw_local_irq_save(flags); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + outb_p(0x34, PIT_MODE); + outb_p(PIT_LATCH & 0xff, PIT_CH0); + outb_p(PIT_LATCH >> 8, PIT_CH0); + break; + + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_UNUSED: + outb_p(0x30, PIT_MODE); + outb_p(0, PIT_CH0); + outb_p(0, PIT_CH0); + break; + + case CLOCK_EVT_MODE_ONESHOT: + case CLOCK_EVT_MODE_RESUME: + break; + } + local_irq_restore(flags); +} - return count; +static int pit_set_next_event(unsigned long delta, + struct clock_event_device *evt) +{ + return 0; } -static irqreturn_t -isa_timer_interrupt(int irq, void *dev_id) +static struct clock_event_device pit_ce = { + .name = "pit", + .features = CLOCK_EVT_FEAT_PERIODIC, + .set_mode = pit_set_mode, + .set_next_event = pit_set_next_event, + .shift = 32, +}; + +static irqreturn_t pit_timer_interrupt(int irq, void *dev_id) { - timer_tick(); + struct clock_event_device *ce = dev_id; + ce->event_handler(ce); return IRQ_HANDLED; } -static struct irqaction isa_timer_irq = { - .name = "ISA timer tick", - .handler = isa_timer_interrupt, +static struct irqaction pit_timer_irq = { + .name = "pit", + .handler = pit_timer_interrupt, .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .dev_id = &pit_ce, }; static void __init isa_timer_init(void) { - /* enable PIT timer */ - /* set for periodic (4) and LSB/MSB write (0x30) */ - outb(0x34, 0x43); - outb((mSEC_10_from_14/6) & 0xFF, 0x40); - outb((mSEC_10_from_14/6) >> 8, 0x40); + pit_ce.cpumask = cpumask_of(smp_processor_id()); + pit_ce.mult = div_sc(PIT_TICK_RATE, NSEC_PER_SEC, pit_ce.shift); + pit_ce.max_delta_ns = clockevent_delta2ns(0x7fff, &pit_ce); + pit_ce.min_delta_ns = clockevent_delta2ns(0x000f, &pit_ce); + + clocksource_register_hz(&pit_cs, PIT_TICK_RATE); - setup_irq(IRQ_ISA_TIMER, &isa_timer_irq); + setup_irq(pit_ce.irq, &pit_timer_irq); + clockevents_register_device(&pit_ce); } struct sys_timer isa_timer = { .init = isa_timer_init, - .offset = isa_gettimeoffset, }; -- cgit v1.2.3-18-g5258 From eff9073790e1286aa12bf1c65814d3e0132b12e1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 31 Jan 2011 16:59:05 +0100 Subject: x86: Rename incorrectly named parameter of numa_cpu_node() numa_cpu_node() prototype in numa_32.h has wrongly named parameter @apicid when it actually takes the CPU number. Change it to @cpu. Reported-by: Yinghai Lu Signed-off-by: Tejun Heo LKML-Reference: <20110131155905.GM7459@htj.dyndns.org> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/numa_32.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/include/asm/numa_32.h b/arch/x86/include/asm/numa_32.h index bc66031afa1..c6beed1ef10 100644 --- a/arch/x86/include/asm/numa_32.h +++ b/arch/x86/include/asm/numa_32.h @@ -6,7 +6,7 @@ extern int numa_off; extern int pxm_to_nid(int pxm); #ifdef CONFIG_NUMA -extern int __cpuinit numa_cpu_node(int apicid); +extern int __cpuinit numa_cpu_node(int cpu); #else /* CONFIG_NUMA */ static inline int numa_cpu_node(int cpu) { return NUMA_NO_NODE; } #endif /* CONFIG_NUMA */ -- cgit v1.2.3-18-g5258 From 62270119867131d6d11fe018f1fafcf0fa2933e3 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Fri, 28 Jan 2011 18:24:11 +0200 Subject: arm: mach-omap2: voltage: debugfs: fix memory leak The temporary string holding the directory name to be created should be released. Signed-off-by: Aaro Koskinen Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/voltage.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index ed6079c94c5..12be525b8df 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -471,6 +471,7 @@ static void __init vdd_debugfs_init(struct omap_vdd_info *vdd) strcat(name, vdd->voltdm.name); vdd->debug_dir = debugfs_create_dir(name, voltage_dir); + kfree(name); if (IS_ERR(vdd->debug_dir)) { pr_warning("%s: Unable to create debugfs directory for" " vdd_%s\n", __func__, vdd->voltdm.name); -- cgit v1.2.3-18-g5258 From 720bc782249015a30438516cee5c4be180a3f675 Mon Sep 17 00:00:00 2001 From: Stefan Weil Date: Sun, 30 Jan 2011 20:26:27 +0100 Subject: OMAP: PM: SmartReflex: Fix possible memory leak sr_info was allocated and needs a kfree before returning. This error was reported by cppcheck: arch/arm/mach-omap2/smartreflex.c:837: error: Memory leak: sr_info To: Tony Lindgren Cc: Russell King Cc: linux-omap@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Stefan Weil Acked-by: Shweta Gulati Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/smartreflex.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index d7deadfaddb..5f429b96fc9 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -834,7 +834,8 @@ static int __init omap_sr_probe(struct platform_device *pdev) if (!pdata) { dev_err(&pdev->dev, "%s: platform data missing\n", __func__); - return -EINVAL; + ret = -EINVAL; + goto err_free_devinfo; } mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); -- cgit v1.2.3-18-g5258 From 8353584eae4af8f37e5a23b63ed816c79185a9c9 Mon Sep 17 00:00:00 2001 From: Stefan Weil Date: Sun, 30 Jan 2011 20:29:38 +0100 Subject: OMAP: PM: SmartReflex: Fix possible null pointer read access These errors were found by cppcheck: arch/arm/mach-omap2/smartreflex.c:784: error: Possible null pointer dereference: sr_info arch/arm/mach-omap2/smartreflex.c:799: error: Possible null pointer dereference: sr_info Both conditional statements are executed when sr_info == NULL, so accessing sr_info->voltdm would fail. Cc: Russell King Cc: linux-omap@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Stefan Weil Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/smartreflex.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 5f429b96fc9..c37e823266d 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -780,8 +780,7 @@ static int omap_sr_autocomp_show(void *data, u64 *val) struct omap_sr *sr_info = (struct omap_sr *) data; if (!sr_info) { - pr_warning("%s: omap_sr struct for sr_%s not found\n", - __func__, sr_info->voltdm->name); + pr_warning("%s: omap_sr struct not found\n", __func__); return -EINVAL; } @@ -795,8 +794,7 @@ static int omap_sr_autocomp_store(void *data, u64 val) struct omap_sr *sr_info = (struct omap_sr *) data; if (!sr_info) { - pr_warning("%s: omap_sr struct for sr_%s not found\n", - __func__, sr_info->voltdm->name); + pr_warning("%s: omap_sr struct not found\n", __func__); return -EINVAL; } -- cgit v1.2.3-18-g5258 From 039c4644b49ea707a2159c22f638f4f1c0144c69 Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Mon, 31 Jan 2011 17:00:24 +0100 Subject: plat-mxc: Provide irq_chip name for GPIO IRQs Signed-off-by: Alexander Stein Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/gpio.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c index d17b3c996b8..e396df8faef 100644 --- a/arch/arm/plat-mxc/gpio.c +++ b/arch/arm/plat-mxc/gpio.c @@ -233,6 +233,7 @@ static int gpio_set_wake_irq(struct irq_data *d, u32 enable) } static struct irq_chip gpio_irq_chip = { + .name = "GPIO", .irq_ack = gpio_ack_irq, .irq_mask = gpio_mask_irq, .irq_unmask = gpio_unmask_irq, -- cgit v1.2.3-18-g5258 From 67f2a87f92716c3126415e114af57164736bbca5 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 25 Jan 2011 13:08:33 -0200 Subject: ARM: mach-mx5: Fix build for mx53_loco and mx53_smd Commit 816ad74 (ARM: i.MX53: Add full iomux support for mx53) renamed some of the pad names. Make the changes accordingly so that mx53_loco and mx53_cmd can build without errors. Signed-off-by: Fabio Estevam Acked-by: Richard Zhao Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/board-mx53_loco.c | 29 +++++++++++++++-------------- arch/arm/mach-mx5/board-mx53_smd.c | 28 ++++++++++++++-------------- 2 files changed, 29 insertions(+), 28 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c index d1348e04ace..dadc856b210 100644 --- a/arch/arm/mach-mx5/board-mx53_loco.c +++ b/arch/arm/mach-mx5/board-mx53_loco.c @@ -39,20 +39,21 @@ #define LOCO_FEC_PHY_RST IMX_GPIO_NR(7, 6) static iomux_v3_cfg_t mx53_loco_pads[] = { - MX53_PAD_CSI0_D10__UART1_TXD, - MX53_PAD_CSI0_D11__UART1_RXD, - MX53_PAD_ATA_DIOW__UART1_TXD, - MX53_PAD_ATA_DMACK__UART1_RXD, - - MX53_PAD_ATA_BUFFER_EN__UART2_RXD, - MX53_PAD_ATA_DMARQ__UART2_TXD, - MX53_PAD_ATA_DIOR__UART2_RTS, - MX53_PAD_ATA_INTRQ__UART2_CTS, - - MX53_PAD_ATA_CS_0__UART3_TXD, - MX53_PAD_ATA_CS_1__UART3_RXD, - MX53_PAD_ATA_DA_1__UART3_CTS, - MX53_PAD_ATA_DA_2__UART3_RTS, + MX53_PAD_CSI0_DAT10__UART1_TXD_MUX, + MX53_PAD_CSI0_DAT11__UART1_RXD_MUX, + MX53_PAD_PATA_DIOW__UART1_TXD_MUX, + MX53_PAD_PATA_DMACK__UART1_RXD_MUX, + + MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX, + MX53_PAD_PATA_DMARQ__UART2_TXD_MUX, + MX53_PAD_PATA_DIOR__UART2_RTS, + MX53_PAD_PATA_INTRQ__UART2_CTS, + + MX53_PAD_PATA_CS_0__UART3_TXD_MUX, + MX53_PAD_PATA_CS_1__UART3_RXD_MUX, + MX53_PAD_PATA_DA_1__UART3_CTS, + MX53_PAD_PATA_DA_2__UART3_RTS, + }; static const struct imxuart_platform_data mx53_loco_uart_data __initconst = { diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c index 7970f7a4858..06070c5969f 100644 --- a/arch/arm/mach-mx5/board-mx53_smd.c +++ b/arch/arm/mach-mx5/board-mx53_smd.c @@ -39,20 +39,20 @@ #define SMD_FEC_PHY_RST IMX_GPIO_NR(7, 6) static iomux_v3_cfg_t mx53_smd_pads[] = { - MX53_PAD_CSI0_D10__UART1_TXD, - MX53_PAD_CSI0_D11__UART1_RXD, - MX53_PAD_ATA_DIOW__UART1_TXD, - MX53_PAD_ATA_DMACK__UART1_RXD, - - MX53_PAD_ATA_BUFFER_EN__UART2_RXD, - MX53_PAD_ATA_DMARQ__UART2_TXD, - MX53_PAD_ATA_DIOR__UART2_RTS, - MX53_PAD_ATA_INTRQ__UART2_CTS, - - MX53_PAD_ATA_CS_0__UART3_TXD, - MX53_PAD_ATA_CS_1__UART3_RXD, - MX53_PAD_ATA_DA_1__UART3_CTS, - MX53_PAD_ATA_DA_2__UART3_RTS, + MX53_PAD_CSI0_DAT10__UART1_TXD_MUX, + MX53_PAD_CSI0_DAT11__UART1_RXD_MUX, + MX53_PAD_PATA_DIOW__UART1_TXD_MUX, + MX53_PAD_PATA_DMACK__UART1_RXD_MUX, + + MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX, + MX53_PAD_PATA_DMARQ__UART2_TXD_MUX, + MX53_PAD_PATA_DIOR__UART2_RTS, + MX53_PAD_PATA_INTRQ__UART2_CTS, + + MX53_PAD_PATA_CS_0__UART3_TXD_MUX, + MX53_PAD_PATA_CS_1__UART3_RXD_MUX, + MX53_PAD_PATA_DA_1__UART3_CTS, + MX53_PAD_PATA_DA_2__UART3_RTS, }; static const struct imxuart_platform_data mx53_smd_uart_data __initconst = { -- cgit v1.2.3-18-g5258 From 528f65271f24d1fe9b46065e0fef9571698bd78c Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 25 Jan 2011 13:08:34 -0200 Subject: ARM: mach-mx5/board-mx53_loco: Make UART1 functional Fix IOMUX settings for UART1 and make UART1 functional. Signed-off-by: Fabio Estevam Acked-by: Richard Zhao Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/board-mx53_loco.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c index dadc856b210..cba4cd5fd9f 100644 --- a/arch/arm/mach-mx5/board-mx53_loco.c +++ b/arch/arm/mach-mx5/board-mx53_loco.c @@ -41,8 +41,6 @@ static iomux_v3_cfg_t mx53_loco_pads[] = { MX53_PAD_CSI0_DAT10__UART1_TXD_MUX, MX53_PAD_CSI0_DAT11__UART1_RXD_MUX, - MX53_PAD_PATA_DIOW__UART1_TXD_MUX, - MX53_PAD_PATA_DMACK__UART1_RXD_MUX, MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX, MX53_PAD_PATA_DMARQ__UART2_TXD_MUX, @@ -62,7 +60,7 @@ static const struct imxuart_platform_data mx53_loco_uart_data __initconst = { static inline void mx53_loco_init_uart(void) { - imx53_add_imx_uart(0, &mx53_loco_uart_data); + imx53_add_imx_uart(0, NULL); imx53_add_imx_uart(1, &mx53_loco_uart_data); imx53_add_imx_uart(2, &mx53_loco_uart_data); } -- cgit v1.2.3-18-g5258 From abc1813dc0285353d9ce387b90ffce8acc26227e Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 25 Jan 2011 13:08:35 -0200 Subject: ARM: mach-mx5/board-mx53_loco: Remove unused UARTs On mx53_loco only UART1 is used and its signals go to connector J16. Remove UART2 and UART3 as they are not used on this board. Signed-off-by: Fabio Estevam Acked-by: Richard Zhao Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/board-mx53_loco.c | 24 +----------------------- 1 file changed, 1 insertion(+), 23 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c index cba4cd5fd9f..3aefd6dab04 100644 --- a/arch/arm/mach-mx5/board-mx53_loco.c +++ b/arch/arm/mach-mx5/board-mx53_loco.c @@ -41,30 +41,8 @@ static iomux_v3_cfg_t mx53_loco_pads[] = { MX53_PAD_CSI0_DAT10__UART1_TXD_MUX, MX53_PAD_CSI0_DAT11__UART1_RXD_MUX, - - MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX, - MX53_PAD_PATA_DMARQ__UART2_TXD_MUX, - MX53_PAD_PATA_DIOR__UART2_RTS, - MX53_PAD_PATA_INTRQ__UART2_CTS, - - MX53_PAD_PATA_CS_0__UART3_TXD_MUX, - MX53_PAD_PATA_CS_1__UART3_RXD_MUX, - MX53_PAD_PATA_DA_1__UART3_CTS, - MX53_PAD_PATA_DA_2__UART3_RTS, - -}; - -static const struct imxuart_platform_data mx53_loco_uart_data __initconst = { - .flags = IMXUART_HAVE_RTSCTS, }; -static inline void mx53_loco_init_uart(void) -{ - imx53_add_imx_uart(0, NULL); - imx53_add_imx_uart(1, &mx53_loco_uart_data); - imx53_add_imx_uart(2, &mx53_loco_uart_data); -} - static inline void mx53_loco_fec_reset(void) { int ret; @@ -88,7 +66,7 @@ static void __init mx53_loco_board_init(void) { mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads, ARRAY_SIZE(mx53_loco_pads)); - mx53_loco_init_uart(); + imx53_add_imx_uart(0, NULL); mx53_loco_fec_reset(); imx53_add_fec(&mx53_loco_fec_data); } -- cgit v1.2.3-18-g5258 From cdb2daa4ffcb331d08e356ed66b57bd14d105746 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 31 Jan 2011 10:32:27 -0200 Subject: ARM: mx5/board-mx53_smd.c: Make UART1 functional Fix UART1 IOMUX settings and configure UART1 to work with only RX/TX pins. Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/board-mx53_smd.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c index 06070c5969f..c7b45d464b6 100644 --- a/arch/arm/mach-mx5/board-mx53_smd.c +++ b/arch/arm/mach-mx5/board-mx53_smd.c @@ -41,8 +41,6 @@ static iomux_v3_cfg_t mx53_smd_pads[] = { MX53_PAD_CSI0_DAT10__UART1_TXD_MUX, MX53_PAD_CSI0_DAT11__UART1_RXD_MUX, - MX53_PAD_PATA_DIOW__UART1_TXD_MUX, - MX53_PAD_PATA_DMACK__UART1_RXD_MUX, MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX, MX53_PAD_PATA_DMARQ__UART2_TXD_MUX, @@ -61,7 +59,7 @@ static const struct imxuart_platform_data mx53_smd_uart_data __initconst = { static inline void mx53_smd_init_uart(void) { - imx53_add_imx_uart(0, &mx53_smd_uart_data); + imx53_add_imx_uart(0, NULL); imx53_add_imx_uart(1, &mx53_smd_uart_data); imx53_add_imx_uart(2, &mx53_smd_uart_data); } -- cgit v1.2.3-18-g5258 From df42c8a720ff2e0d52d187bb1120339e79f58604 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 31 Jan 2011 15:12:54 -0200 Subject: ARM: mx5/board-mx53_evk.c: Make UART1 functional Fix UART1 IOMUX settings and configure UART1 to work with only RX/TX pins. Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/board-mx53_evk.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c index eba9df08119..49780079f59 100644 --- a/arch/arm/mach-mx5/board-mx53_evk.c +++ b/arch/arm/mach-mx5/board-mx53_evk.c @@ -44,8 +44,6 @@ static iomux_v3_cfg_t mx53_evk_pads[] = { MX53_PAD_CSI0_DAT10__UART1_TXD_MUX, MX53_PAD_CSI0_DAT11__UART1_RXD_MUX, - MX53_PAD_PATA_DIOW__UART1_TXD_MUX, - MX53_PAD_PATA_DMACK__UART1_RXD_MUX, MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX, MX53_PAD_PATA_DMARQ__UART2_TXD_MUX, @@ -72,7 +70,7 @@ static const struct imxuart_platform_data mx53_evk_uart_pdata __initconst = { static inline void mx53_evk_init_uart(void) { - imx53_add_imx_uart(0, &mx53_evk_uart_pdata); + imx53_add_imx_uart(0, NULL); imx53_add_imx_uart(1, &mx53_evk_uart_pdata); imx53_add_imx_uart(2, &mx53_evk_uart_pdata); } -- cgit v1.2.3-18-g5258 From 303783aac812020d1a8b5152f44639d528870317 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 27 Jan 2011 06:26:36 +0800 Subject: ARM: mxs: fix clock base address missing Signed-off-by: Shawn Guo Signed-off-by: Sascha Hauer --- arch/arm/mach-mxs/clock-mx23.c | 2 +- arch/arm/mach-mxs/clock-mx28.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c index 72069243aec..ca72a05ed9c 100644 --- a/arch/arm/mach-mxs/clock-mx23.c +++ b/arch/arm/mach-mxs/clock-mx23.c @@ -347,7 +347,7 @@ static int name##_set_parent(struct clk *clk, struct clk *parent) \ { \ if (parent != clk->parent) { \ __raw_writel(BM_CLKCTRL_CLKSEQ_BYPASS_##bit, \ - HW_CLKCTRL_CLKSEQ_TOG); \ + CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ_TOG); \ clk->parent = parent; \ } \ \ diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index 44acd9cd177..bf30d2b66d8 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -483,7 +483,7 @@ static int name##_set_parent(struct clk *clk, struct clk *parent) \ { \ if (parent != clk->parent) { \ __raw_writel(BM_CLKCTRL_CLKSEQ_BYPASS_##bit, \ - HW_CLKCTRL_CLKSEQ_TOG); \ + CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ_TOG); \ clk->parent = parent; \ } \ \ -- cgit v1.2.3-18-g5258 From 014aaf6b15842eec03162c0026ec533b4b738126 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Thu, 27 Jan 2011 11:28:34 +0100 Subject: ARM: mxs/imx28: remove now unused clock lookup "fec.0" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit b2878fa (ARM: mx28: update clock and device name for dual fec support) added only the new lookups without removing the old one. Cc: Shawn Guo Signed-off-by: Uwe Kleine-König Acked-by: Shawn Guo Signed-off-by: Sascha Hauer --- arch/arm/mach-mxs/clock-mx28.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index bf30d2b66d8..fd1c4c54b8e 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -609,7 +609,6 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("duart", NULL, uart_clk) _REGISTER_CLOCK("imx28-fec.0", NULL, fec_clk) _REGISTER_CLOCK("imx28-fec.1", NULL, fec_clk) - _REGISTER_CLOCK("fec.0", NULL, fec_clk) _REGISTER_CLOCK("rtc", NULL, rtc_clk) _REGISTER_CLOCK("pll2", NULL, pll2_clk) _REGISTER_CLOCK(NULL, "hclk", hbus_clk) -- cgit v1.2.3-18-g5258 From 5939d25ff296bd69fd98ead938cb63e467939040 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Fri, 28 Jan 2011 07:07:13 +0000 Subject: sh: sh7750: move machtypes.h to include/generated By commit 3252b11fc4790d046b93f300c898df2f7cd7c176, machtypes.h moved to include/generated. However, this forgot kernel/cpu/sh4/setup-sh7750. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4/setup-sh7750.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c index 672944f5b19..84230e9ed96 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c @@ -14,7 +14,7 @@ #include #include #include -#include +#include static struct resource rtc_resources[] = { [0] = { -- cgit v1.2.3-18-g5258 From 0ce08870b8a4895044b6cf2bbdc774a6faaa3656 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Fri, 28 Jan 2011 22:04:01 +0000 Subject: sh: sh7750: Fix incompatible pointer type MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It is necessary to set array of struct platform_device in early_platform_add_devices(). arch/sh/kernel/cpu/sh4/setup-sh7750.c: In function ‘plat_early_device_setup’: arch/sh/kernel/cpu/sh4/setup-sh7750.c:260: warning: passing argument 1 of ‘early_platform_add_devices’ from incompatible pointer type include/linux/platform_device.h:159: note: expected ‘struct platform_device **’ but argument is of type ‘struct platform_device *’ arch/sh/kernel/cpu/sh4/setup-sh7750.c:262: warning: passing argument 1 of ‘early_platform_add_devices’ from incompatible pointer type include/linux/platform_device.h:159: note: expected ‘struct platform_device **’ but argument is of type ‘struct platform_device *’ arch/sh/kernel/cpu/sh4/setup-sh7750.c:263: warning: passing argument 1 of ‘early_platform_add_devices’ from incompatible pointer type include/linux/platform_device.h:159: note: expected ‘struct platform_device **’ but argument is of type ‘struct platform_device *’ Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4/setup-sh7750.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c index 84230e9ed96..e53b4b38bd1 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c @@ -255,12 +255,17 @@ static struct platform_device *sh7750_early_devices[] __initdata = { void __init plat_early_device_setup(void) { + struct platform_device *dev[1]; + if (mach_is_rts7751r2d()) { scif_platform_data.scscr |= SCSCR_CKE1; - early_platform_add_devices(&scif_device, 1); + dev[0] = &scif_device; + early_platform_add_devices(dev, 1); } else { - early_platform_add_devices(&sci_device, 1); - early_platform_add_devices(&scif_device, 1); + dev[0] = &sci_device; + early_platform_add_devices(dev, 1); + dev[0] = &scif_device; + early_platform_add_devices(dev, 1); } early_platform_add_devices(sh7750_early_devices, -- cgit v1.2.3-18-g5258 From f55398ab9839a4035b97234c9fa0edc11d37ffa4 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Fri, 28 Jan 2011 09:59:17 +0000 Subject: ARM: mach-shmobile: AG5EVM MIPI-DSI LCD reset delay fix Add a 100 ms delay after the MIPI-DSI panel reset to fix issue related to the LCD panel not starting properly at boot up time. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-ag5evm.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index 2123b96b563..4303a86e6e3 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -454,6 +454,7 @@ static void __init ag5evm_init(void) gpio_direction_output(GPIO_PORT217, 0); mdelay(1); gpio_set_value(GPIO_PORT217, 1); + mdelay(100); /* LCD backlight controller */ gpio_request(GPIO_PORT235, NULL); /* RESET */ -- cgit v1.2.3-18-g5258 From ad054cbd7323a675588c7aa5d714a3663c48ca25 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Fri, 28 Jan 2011 10:04:25 +0000 Subject: ARM: mach-shmobile: Add sh73a0 MIPI-CSI and CEU clocks Update the sh73a0 CPGA to support clocks for CEU and MIPI-CSI. This includes MSTP bits for CSI and CEU and div6 clkdev bindings for VCK1-3. Fix the order of the MSTP32 entries in the clkdev table while at it. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/clock-sh73a0.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index ddd4a1b775f..7e58904c1c8 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -263,7 +263,7 @@ static struct clk div6_clks[DIV6_NR] = { }; enum { MSTP001, - MSTP125, MSTP118, MSTP116, MSTP100, + MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100, MSTP219, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, MSTP331, MSTP329, MSTP325, MSTP323, MSTP312, @@ -275,6 +275,10 @@ enum { MSTP001, static struct clk mstp_clks[MSTP_NR] = { [MSTP001] = MSTP(&div4_clks[DIV4_HP], SMSTPCR0, 1, 0), /* IIC2 */ + [MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* CEU1 */ + [MSTP128] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 28, 0), /* CSI2-RX1 */ + [MSTP127] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 27, 0), /* CEU0 */ + [MSTP126] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 26, 0), /* CSI2-RX0 */ [MSTP125] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 25, 0), /* TMU0 */ [MSTP118] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 18, 0), /* DSITX0 */ [MSTP116] = MSTP(&div4_clks[DIV4_HP], SMSTPCR1, 16, 0), /* IIC0 */ @@ -306,6 +310,9 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("r_clk", &r_clk), /* DIV6 clocks */ + CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]), + CLKDEV_CON_ID("vck2_clk", &div6_clks[DIV6_VCK2]), + CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]), CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSIT]), CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]), CLKDEV_ICK_ID("dsi0p_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]), @@ -313,11 +320,15 @@ static struct clk_lookup lookups[] = { /* MSTP32 clocks */ CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */ - CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */ + CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[MSTP129]), /* CEU1 */ + CLKDEV_DEV_ID("sh-mobile-csi2.1", &mstp_clks[MSTP128]), /* CSI2-RX1 */ + CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[MSTP127]), /* CEU0 */ + CLKDEV_DEV_ID("sh-mobile-csi2.0", &mstp_clks[MSTP126]), /* CSI2-RX0 */ CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP125]), /* TMU00 */ CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP125]), /* TMU01 */ - CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */ CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX */ + CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */ + CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */ CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */ CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */ CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */ -- cgit v1.2.3-18-g5258 From 47f5ae51f2aedac2f3006c1252f1020fdfc1d3c0 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Mon, 31 Jan 2011 15:37:15 -0700 Subject: ARM: tegra: Add to struct harmony_audio_platform_data Add fields to describe all the audio-related GPIOs on Harmony, except for the codec's GPIO IRQ, which will be passed in its i2c_board_info. Signed-off-by: Stephen Warren Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- arch/arm/mach-tegra/include/mach/harmony_audio.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-tegra/include/mach/harmony_audio.h b/arch/arm/mach-tegra/include/mach/harmony_audio.h index 5c46391ea7e..af086500ab7 100644 --- a/arch/arm/mach-tegra/include/mach/harmony_audio.h +++ b/arch/arm/mach-tegra/include/mach/harmony_audio.h @@ -16,4 +16,7 @@ struct harmony_audio_platform_data { int gpio_spkr_en; + int gpio_hp_det; + int gpio_int_mic_en; + int gpio_ext_mic_en; }; -- cgit v1.2.3-18-g5258 From 2492218c63dca0fb4f041bdc366d243ae3426b40 Mon Sep 17 00:00:00 2001 From: Daniel Hellstrom Date: Tue, 1 Feb 2011 12:39:59 -0800 Subject: sparc32: unaligned memory access (MNA) trap handler bug Since commit f0e98c387e61de00646be31fab4c2fa0224e1efb ("[SPARC]: Fix link errors with gcc-4.3") the MNA trap handler does not emulate stores to unaligned addresses correctly. MNA operation from both kernel and user space are affected. A typical effect of this bug is nr_frags in skbs are overwritten during buffer copying/checksum-calculation, or maximally 6 bytes of data in the network buffer will be overwitten with garbage. Signed-off-by: Daniel Hellstrom Signed-off-by: David S. Miller --- arch/sparc/kernel/una_asm_32.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc/kernel/una_asm_32.S b/arch/sparc/kernel/una_asm_32.S index 8cc03458eb7..8f096e84a93 100644 --- a/arch/sparc/kernel/una_asm_32.S +++ b/arch/sparc/kernel/una_asm_32.S @@ -24,9 +24,9 @@ retl_efault: .globl __do_int_store __do_int_store: ld [%o2], %g1 - cmp %1, 2 + cmp %o1, 2 be 2f - cmp %1, 4 + cmp %o1, 4 be 1f srl %g1, 24, %g2 srl %g1, 16, %g7 -- cgit v1.2.3-18-g5258 From 713f25cec6331fca414aefb2ab5b20d88c610a2f Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Tue, 1 Feb 2011 15:36:28 +0000 Subject: arm: mach-omap2: board-rm680: fix rm680_vemmc regulator constraints With the commit 757902513019e6ee469791ff76f954b19ca8d036 (regulator: Factor out voltage set operation into a separate function) fixed voltage regulator setup will fail if there are voltage constraints defined. This made MMC unusable on this board. Fix by just deleting those redundant constraints. Signed-off-by: Aaro Koskinen Reviewed-by: Jarkko Nikula [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-rm680.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index cb77be7ac44..39a71bb8a30 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -40,9 +40,6 @@ static struct regulator_consumer_supply rm680_vemmc_consumers[] = { static struct regulator_init_data rm680_vemmc = { .constraints = { .name = "rm680_vemmc", - .min_uV = 2900000, - .max_uV = 2900000, - .apply_uV = 1, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_STATUS -- cgit v1.2.3-18-g5258 From 9d47e309015b8d5ab32851cd0216e4b96b6407e4 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Fri, 28 Jan 2011 14:50:55 +0000 Subject: arm: mach-omap2: mux: free allocated memory on error exit Free allocated memory on error exit. Signed-off-by: Aaro Koskinen Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/mux.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index fae49d12bc7..98148b6c36e 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -1000,6 +1000,7 @@ int __init omap_mux_init(const char *name, u32 flags, if (!partition->base) { pr_err("%s: Could not ioremap mux partition at 0x%08x\n", __func__, partition->phys); + kfree(partition); return -ENODEV; } -- cgit v1.2.3-18-g5258 From 190910cb82669980edff7432be9542d4bec91adb Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Fri, 28 Jan 2011 14:04:38 +0000 Subject: omap1: remove duplicated #include Remove duplicated #include('s) in arch/arm/mach-omap1/time.c Signed-off-by: Huang Weiyi Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/time.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index f83fc335c61..6885d2fac18 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -44,7 +44,6 @@ #include #include #include -#include #include #include -- cgit v1.2.3-18-g5258 From daf7aabcc14b3d63d8f134ca181e8b66f047e2d6 Mon Sep 17 00:00:00 2001 From: Thomas Weber Date: Thu, 20 Jan 2011 15:41:48 +0000 Subject: OMAP3: Devkit8000: Change lcd power pin This patch fixes a wrongly used lcd enable pin. The Devkit8000 uses twl4030_ledA configured as output gpio only for the lcd enable line. twl4030_gpio.1 is used through the generic gpio functions while ledA is used via low level twl4030 calls. This patch removes the low level calls and use the generic gpio functions for initialization and use of ledA. This patch also fixes a bug where the lcd would not power down when blanking. Further this patch fixes an indentation issue. The comment line uses eight whitespace and is replaced with a hard tab. gpio_request + gpio_direction_output are replaced with gpio_request_one. The return value of gpio_request_one is used to set the value of the gpio to -EINVAL when unsuccessful, so that gpio_is_valid can detect the unsuccessful request. But already successful requested gpios are not freed. Reported-by: Daniel Morsing Signed-off-by: Thomas Weber Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-devkit8000.c | 27 ++++++++++++++++----------- 1 file changed, 16 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index e906e05bb41..9a2a31e011c 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -115,9 +115,6 @@ static struct omap2_hsmmc_info mmc[] = { static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev) { - twl_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, REG_GPIODATADIR1); - twl_i2c_write_u8(TWL4030_MODULE_LED, 0x0, 0x0); - if (gpio_is_valid(dssdev->reset_gpio)) gpio_set_value_cansleep(dssdev->reset_gpio, 1); return 0; @@ -247,6 +244,8 @@ static struct gpio_led gpio_leds[]; static int devkit8000_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { + int ret; + omap_mux_init_gpio(29, OMAP_PIN_INPUT); /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; @@ -255,17 +254,23 @@ static int devkit8000_twl_gpio_setup(struct device *dev, /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; - /* gpio + 1 is "LCD_PWREN" (out, active high) */ - devkit8000_lcd_device.reset_gpio = gpio + 1; - gpio_request(devkit8000_lcd_device.reset_gpio, "LCD_PWREN"); - /* Disable until needed */ - gpio_direction_output(devkit8000_lcd_device.reset_gpio, 0); + /* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */ + devkit8000_lcd_device.reset_gpio = gpio + TWL4030_GPIO_MAX + 0; + ret = gpio_request_one(devkit8000_lcd_device.reset_gpio, + GPIOF_DIR_OUT | GPIOF_INIT_LOW, "LCD_PWREN"); + if (ret < 0) { + devkit8000_lcd_device.reset_gpio = -EINVAL; + printk(KERN_ERR "Failed to request GPIO for LCD_PWRN\n"); + } /* gpio + 7 is "DVI_PD" (out, active low) */ devkit8000_dvi_device.reset_gpio = gpio + 7; - gpio_request(devkit8000_dvi_device.reset_gpio, "DVI PowerDown"); - /* Disable until needed */ - gpio_direction_output(devkit8000_dvi_device.reset_gpio, 0); + ret = gpio_request_one(devkit8000_dvi_device.reset_gpio, + GPIOF_DIR_OUT | GPIOF_INIT_LOW, "DVI PowerDown"); + if (ret < 0) { + devkit8000_dvi_device.reset_gpio = -EINVAL; + printk(KERN_ERR "Failed to request GPIO for DVI PowerDown\n"); + } return 0; } -- cgit v1.2.3-18-g5258 From 8e572bab39c484cdf512715f98626337f25cfc32 Mon Sep 17 00:00:00 2001 From: "Justin P. Mattock" Date: Wed, 2 Feb 2011 11:31:21 +0100 Subject: fix typos 'comamnd' -> 'command' in comments Signed-off-by: Justin P. Mattock --- arch/ia64/include/asm/perfmon.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/include/asm/perfmon.h b/arch/ia64/include/asm/perfmon.h index 7f3333dd00e..d551183fee9 100644 --- a/arch/ia64/include/asm/perfmon.h +++ b/arch/ia64/include/asm/perfmon.h @@ -7,7 +7,7 @@ #define _ASM_IA64_PERFMON_H /* - * perfmon comamnds supported on all CPU models + * perfmon commands supported on all CPU models */ #define PFM_WRITE_PMCS 0x01 #define PFM_WRITE_PMDS 0x02 -- cgit v1.2.3-18-g5258 From c89b3458d8cc1925a9ca90408ff3bfe43dab6522 Mon Sep 17 00:00:00 2001 From: Tirumala Marri Date: Wed, 8 Dec 2010 14:49:05 +0000 Subject: powerpc/44x: Add USB DWC DTS entry to Canyonlands board Add Synopsys Designware DTS entry for 460EX based Canyonlands board. Signed-off-by: Tirumala R Marri Signed-off-by: Josh Boyer --- arch/powerpc/boot/dts/canyonlands.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts index 5b27a4b74b7..54caec68738 100644 --- a/arch/powerpc/boot/dts/canyonlands.dts +++ b/arch/powerpc/boot/dts/canyonlands.dts @@ -172,6 +172,19 @@ interrupts = <0x1e 4>; }; + USBOTG0: usbotg@bff80000 { + compatible = "amcc,dwc-otg"; + reg = <0x4 0xbff80000 0x10000>; + interrupt-parent = <&USBOTG0>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupts = <0x0 0x1 0x2>; + interrupt-map = ; + }; + SATA0: sata@bffd1000 { compatible = "amcc,sata-460ex"; reg = <4 0xbffd1000 0x800 4 0xbffd0800 0x400>; -- cgit v1.2.3-18-g5258 From 8960f7ff508064de1896d8539911411179b8433c Mon Sep 17 00:00:00 2001 From: Rupjyoti Sarmah Date: Wed, 15 Dec 2010 02:27:10 +0000 Subject: powerpc/44x: PHY fixup for USB on canyonlands board This fix is a reset for USB PHY that requires some amount of time for power to be stable on Canyonlands. Signed-off-by: Rupjyoti Sarmah Signed-off-by: Josh Boyer --- arch/powerpc/boot/dts/canyonlands.dts | 11 +++ arch/powerpc/platforms/44x/44x.h | 4 + arch/powerpc/platforms/44x/Kconfig | 1 - arch/powerpc/platforms/44x/Makefile | 1 + arch/powerpc/platforms/44x/canyonlands.c | 134 +++++++++++++++++++++++++++++ arch/powerpc/platforms/44x/ppc44x_simple.c | 1 - 6 files changed, 150 insertions(+), 2 deletions(-) create mode 100644 arch/powerpc/platforms/44x/canyonlands.c (limited to 'arch') diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts index 54caec68738..2779f08313a 100644 --- a/arch/powerpc/boot/dts/canyonlands.dts +++ b/arch/powerpc/boot/dts/canyonlands.dts @@ -246,6 +246,11 @@ }; }; + cpld@2,0 { + compatible = "amcc,ppc460ex-bcsr"; + reg = <2 0x0 0x9>; + }; + ndfc@3,0 { compatible = "ibm,ndfc"; reg = <0x00000003 0x00000000 0x00002000>; @@ -320,6 +325,12 @@ interrupts = <0x3 0x4>; }; + GPIO0: gpio@ef600b00 { + compatible = "ibm,ppc4xx-gpio"; + reg = <0xef600b00 0x00000048>; + gpio-controller; + }; + ZMII0: emac-zmii@ef600d00 { compatible = "ibm,zmii-460ex", "ibm,zmii"; reg = <0xef600d00 0x0000000c>; diff --git a/arch/powerpc/platforms/44x/44x.h b/arch/powerpc/platforms/44x/44x.h index dbc4d2b4301..63f703ecd23 100644 --- a/arch/powerpc/platforms/44x/44x.h +++ b/arch/powerpc/platforms/44x/44x.h @@ -4,4 +4,8 @@ extern u8 as1_readb(volatile u8 __iomem *addr); extern void as1_writeb(u8 data, volatile u8 __iomem *addr); +#define GPIO0_OSRH 0xC +#define GPIO0_TSRH 0x14 +#define GPIO0_ISR1H 0x34 + #endif /* __POWERPC_PLATFORMS_44X_44X_H */ diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index 0f979c5c756..f485fc5f6d5 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -115,7 +115,6 @@ config CANYONLANDS bool "Canyonlands" depends on 44x default n - select PPC44x_SIMPLE select 460EX select PCI select PPC4xx_PCI_EXPRESS diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile index c04d16df848..553db600721 100644 --- a/arch/powerpc/platforms/44x/Makefile +++ b/arch/powerpc/platforms/44x/Makefile @@ -9,3 +9,4 @@ obj-$(CONFIG_WARP) += warp.o obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o obj-$(CONFIG_XILINX_ML510) += virtex_ml510.o obj-$(CONFIG_ISS4xx) += iss4xx.o +obj-$(CONFIG_CANYONLANDS)+= canyonlands.o diff --git a/arch/powerpc/platforms/44x/canyonlands.c b/arch/powerpc/platforms/44x/canyonlands.c new file mode 100644 index 00000000000..afc5e8ea377 --- /dev/null +++ b/arch/powerpc/platforms/44x/canyonlands.c @@ -0,0 +1,134 @@ +/* + * This contain platform specific code for APM PPC460EX based Canyonlands + * board. + * + * Copyright (c) 2010, Applied Micro Circuits Corporation + * Author: Rupjyoti Sarmah + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include "44x.h" + +#define BCSR_USB_EN 0x11 + +static __initdata struct of_device_id ppc460ex_of_bus[] = { + { .compatible = "ibm,plb4", }, + { .compatible = "ibm,opb", }, + { .compatible = "ibm,ebc", }, + { .compatible = "simple-bus", }, + {}, +}; + +static int __init ppc460ex_device_probe(void) +{ + of_platform_bus_probe(NULL, ppc460ex_of_bus, NULL); + + return 0; +} +machine_device_initcall(canyonlands, ppc460ex_device_probe); + +/* Using this code only for the Canyonlands board. */ + +static int __init ppc460ex_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + if (of_flat_dt_is_compatible(root, "amcc,canyonlands")) { + ppc_pci_set_flags(PPC_PCI_REASSIGN_ALL_RSRC); + return 1; + } + return 0; +} + +/* USB PHY fixup code on Canyonlands kit. */ + +static int __init ppc460ex_canyonlands_fixup(void) +{ + u8 __iomem *bcsr ; + void __iomem *vaddr; + struct device_node *np; + int ret = 0; + + np = of_find_compatible_node(NULL, NULL, "amcc,ppc460ex-bcsr"); + if (!np) { + printk(KERN_ERR "failed did not find amcc, ppc460ex bcsr node\n"); + return -ENODEV; + } + + bcsr = of_iomap(np, 0); + of_node_put(np); + + if (!bcsr) { + printk(KERN_CRIT "Could not remap bcsr\n"); + ret = -ENODEV; + goto err_bcsr; + } + + np = of_find_compatible_node(NULL, NULL, "ibm,ppc4xx-gpio"); + if (!np) { + printk(KERN_ERR "failed did not find ibm,ppc4xx-gpio node\n"); + return -ENODEV; + } + + vaddr = of_iomap(np, 0); + of_node_put(np); + + if (!vaddr) { + printk(KERN_CRIT "Could not get gpio node address\n"); + ret = -ENODEV; + goto err_gpio; + } + /* Disable USB, through the BCSR7 bits */ + setbits8(&bcsr[7], BCSR_USB_EN); + + /* Wait for a while after reset */ + msleep(100); + + /* Enable USB here */ + clrbits8(&bcsr[7], BCSR_USB_EN); + + /* + * Configure multiplexed gpio16 and gpio19 as alternate1 output + * source after USB reset. In this configuration gpio16 will be + * USB2HStop and gpio19 will be USB2DStop. For more details refer to + * table 34-7 of PPC460EX user manual. + */ + setbits32((vaddr + GPIO0_OSRH), 0x42000000); + setbits32((vaddr + GPIO0_TSRH), 0x42000000); +err_gpio: + iounmap(vaddr); +err_bcsr: + iounmap(bcsr); + return ret; +} +machine_device_initcall(canyonlands, ppc460ex_canyonlands_fixup); +define_machine(canyonlands) { + .name = "Canyonlands", + .probe = ppc460ex_probe, + .progress = udbg_progress, + .init_IRQ = uic_init_tree, + .get_irq = uic_get_irq, + .restart = ppc4xx_reset_system, + .calibrate_decr = generic_calibrate_decr, +}; diff --git a/arch/powerpc/platforms/44x/ppc44x_simple.c b/arch/powerpc/platforms/44x/ppc44x_simple.c index 7ddcba3b939..c81c19c0b3d 100644 --- a/arch/powerpc/platforms/44x/ppc44x_simple.c +++ b/arch/powerpc/platforms/44x/ppc44x_simple.c @@ -53,7 +53,6 @@ static char *board[] __initdata = { "amcc,arches", "amcc,bamboo", "amcc,bluestone", - "amcc,canyonlands", "amcc,glacier", "ibm,ebony", "amcc,eiger", -- cgit v1.2.3-18-g5258 From c48d0dbaac7f27c083430170c66194d6a523bc2a Mon Sep 17 00:00:00 2001 From: Dave Kleikamp Date: Wed, 26 Jan 2011 06:17:58 +0000 Subject: powerpc/476: define specific cpu table entry DD2 core The DD2 core still has some unstability. Define CPU_FTR_476_DD2 to enable workarounds in later patches. This is based on an earlier, unreleased patch for DD1 by Ben Herrenschmidt. Signed-off-by: Dave Kleikamp Signed-off-by: Josh Boyer --- arch/powerpc/include/asm/cputable.h | 3 ++- arch/powerpc/kernel/cputable.c | 22 ++++++++++++++++++---- 2 files changed, 20 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h index f0a211d9692..be3cdf9134c 100644 --- a/arch/powerpc/include/asm/cputable.h +++ b/arch/powerpc/include/asm/cputable.h @@ -154,6 +154,7 @@ extern const char *powerpc_base_platform; #define CPU_FTR_NAP_DISABLE_L2_PR ASM_CONST(0x0000000000002000) #define CPU_FTR_DUAL_PLL_750FX ASM_CONST(0x0000000000004000) #define CPU_FTR_NO_DPM ASM_CONST(0x0000000000008000) +#define CPU_FTR_476_DD2 ASM_CONST(0x0000000000010000) #define CPU_FTR_NEED_COHERENT ASM_CONST(0x0000000000020000) #define CPU_FTR_NO_BTIC ASM_CONST(0x0000000000040000) #define CPU_FTR_NODSISRALIGN ASM_CONST(0x0000000000100000) @@ -465,7 +466,7 @@ enum { CPU_FTRS_44X | CPU_FTRS_440x6 | #endif #ifdef CONFIG_PPC_47x - CPU_FTRS_47X | + CPU_FTRS_47X | CPU_FTR_476_DD2 | #endif #ifdef CONFIG_E200 CPU_FTRS_E200 | diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index be5ab18b03b..bf7cf86e04d 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -1834,11 +1834,11 @@ static struct cpu_spec __initdata cpu_specs[] = { .machine_check = machine_check_440A, .platform = "ppc440", }, - { /* 476 core */ - .pvr_mask = 0xffff0000, - .pvr_value = 0x11a50000, + { /* 476 DD2 core */ + .pvr_mask = 0xffffffff, + .pvr_value = 0x11a52080, .cpu_name = "476", - .cpu_features = CPU_FTRS_47X, + .cpu_features = CPU_FTRS_47X | CPU_FTR_476_DD2, .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU, .mmu_features = MMU_FTR_TYPE_47x | @@ -1862,6 +1862,20 @@ static struct cpu_spec __initdata cpu_specs[] = { .machine_check = machine_check_47x, .platform = "ppc470", }, + { /* 476 others */ + .pvr_mask = 0xffff0000, + .pvr_value = 0x11a50000, + .cpu_name = "476", + .cpu_features = CPU_FTRS_47X, + .cpu_user_features = COMMON_USER_BOOKE | + PPC_FEATURE_HAS_FPU, + .mmu_features = MMU_FTR_TYPE_47x | + MMU_FTR_USE_TLBIVAX_BCAST | MMU_FTR_LOCK_BCAST_INVAL, + .icache_bsize = 32, + .dcache_bsize = 128, + .machine_check = machine_check_47x, + .platform = "ppc470", + }, { /* default match */ .pvr_mask = 0x00000000, .pvr_value = 0x00000000, -- cgit v1.2.3-18-g5258 From 21a06b0459f5e3ecdeccacfbf076c229514c1840 Mon Sep 17 00:00:00 2001 From: Dave Kleikamp Date: Wed, 26 Jan 2011 06:17:59 +0000 Subject: powerpc/476: Workaround for PLB6 hang The 476FP core may hang if an instruction fetch happens during an msync following a tlbsync. This workaround makes sure that enough instruction cache lines are pre-fetched before executing the msync. (sync and msync are the same to the compiler.) Signed-off-by: Dave Kleikamp Signed-off-by: Josh Boyer --- arch/powerpc/mm/tlb_nohash_low.S | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S index af405eefe48..7c63c0ed4f1 100644 --- a/arch/powerpc/mm/tlb_nohash_low.S +++ b/arch/powerpc/mm/tlb_nohash_low.S @@ -189,6 +189,13 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_47x) blr #ifdef CONFIG_PPC_47x + +/* + * 47x variant of icbt + */ +# define ICBT(CT,RA,RB) \ + .long 0x7c00002c | ((CT) << 21) | ((RA) << 16) | ((RB) << 11) + /* * _tlbivax_bcast is only on 47x. We don't bother doing a runtime * check though, it will blow up soon enough if we mistakenly try @@ -206,7 +213,35 @@ _GLOBAL(_tlbivax_bcast) isync eieio tlbsync +BEGIN_FTR_SECTION + b 1f +END_FTR_SECTION_IFSET(CPU_FTR_476_DD2) + sync + wrtee r10 + blr +/* + * DD2 HW could hang if in instruction fetch happens before msync completes. + * Touch enough instruction cache lines to ensure cache hits + */ +1: mflr r9 + bl 2f +2: mflr r6 + li r7,32 + ICBT(0,r6,r7) /* touch next cache line */ + add r6,r6,r7 + ICBT(0,r6,r7) /* touch next cache line */ + add r6,r6,r7 + ICBT(0,r6,r7) /* touch next cache line */ sync + nop + nop + nop + nop + nop + nop + nop + nop + mtlr r9 wrtee r10 blr #endif /* CONFIG_PPC_47x */ -- cgit v1.2.3-18-g5258 From ce26efdefa5e8f22d933df72d7f7482725091d6d Mon Sep 17 00:00:00 2001 From: Richard Cochran Date: Tue, 1 Feb 2011 13:52:30 +0000 Subject: x86: Add clock_adjtime for x86 This patch adds the clock_adjtime system call to the x86 architecture. Signed-off-by: Richard Cochran Acked-by: John Stultz LKML-Reference: <20110201134419.968905083@linutronix.de> Signed-off-by: Thomas Gleixner --- arch/x86/ia32/ia32entry.S | 1 + arch/x86/include/asm/unistd_32.h | 3 ++- arch/x86/include/asm/unistd_64.h | 2 ++ arch/x86/kernel/syscall_table_32.S | 1 + 4 files changed, 6 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S index 518bb99c339..0ed78961b60 100644 --- a/arch/x86/ia32/ia32entry.S +++ b/arch/x86/ia32/ia32entry.S @@ -851,4 +851,5 @@ ia32_sys_call_table: .quad sys_fanotify_init .quad sys32_fanotify_mark .quad sys_prlimit64 /* 340 */ + .quad compat_sys_clock_adjtime ia32_syscall_end: diff --git a/arch/x86/include/asm/unistd_32.h b/arch/x86/include/asm/unistd_32.h index b766a5e8ba0..b6f73f1bc7a 100644 --- a/arch/x86/include/asm/unistd_32.h +++ b/arch/x86/include/asm/unistd_32.h @@ -346,10 +346,11 @@ #define __NR_fanotify_init 338 #define __NR_fanotify_mark 339 #define __NR_prlimit64 340 +#define __NR_clock_adjtime 341 #ifdef __KERNEL__ -#define NR_syscalls 341 +#define NR_syscalls 342 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/arch/x86/include/asm/unistd_64.h b/arch/x86/include/asm/unistd_64.h index 363e9b8a715..5ee30858f5d 100644 --- a/arch/x86/include/asm/unistd_64.h +++ b/arch/x86/include/asm/unistd_64.h @@ -669,6 +669,8 @@ __SYSCALL(__NR_fanotify_init, sys_fanotify_init) __SYSCALL(__NR_fanotify_mark, sys_fanotify_mark) #define __NR_prlimit64 302 __SYSCALL(__NR_prlimit64, sys_prlimit64) +#define __NR_clock_adjtime 303 +__SYSCALL(__NR_clock_adjtime, sys_clock_adjtime) #ifndef __NO_STUBS #define __ARCH_WANT_OLD_READDIR diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S index b35786dc9b8..68c7b9aa500 100644 --- a/arch/x86/kernel/syscall_table_32.S +++ b/arch/x86/kernel/syscall_table_32.S @@ -340,3 +340,4 @@ ENTRY(sys_call_table) .long sys_fanotify_init .long sys_fanotify_mark .long sys_prlimit64 /* 340 */ + .long sys_clock_adjtime -- cgit v1.2.3-18-g5258 From 719078a6bff1cabdbca8d404fb73bcaed1d0fc81 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 2 Feb 2011 12:13:50 -0800 Subject: OMAP1: Fix non-working LCD on OMAP310 This patch fixes bug introduced in revision: f8e9e98454606e43b728269de21db349f57861c7 omap1: DMA: move LCD related code from plat-omap to mach-omap1 The code introduced by this patch didn't consider any other CPUs but OMAP1510, which rendered OMAP310 -- which has the same LCD controller -- non-working. Use cpu_is_omap15xx() instead of cpu_is_omap1510() to squash this issue. Bug found on Palm Zire 71 hardware. Signed-off-by: Marek Vasut Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/lcd_dma.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c index c9088d85da0..453809359ba 100644 --- a/arch/arm/mach-omap1/lcd_dma.c +++ b/arch/arm/mach-omap1/lcd_dma.c @@ -37,7 +37,7 @@ int omap_lcd_dma_running(void) * On OMAP1510, internal LCD controller will start the transfer * when it gets enabled, so assume DMA running if LCD enabled. */ - if (cpu_is_omap1510()) + if (cpu_is_omap15xx()) if (omap_readw(OMAP_LCDC_CONTROL) & OMAP_LCDC_CTRL_LCD_EN) return 1; @@ -95,7 +95,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer); void omap_set_lcd_dma_b1_rotation(int rotate) { - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n"); BUG(); return; @@ -106,7 +106,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation); void omap_set_lcd_dma_b1_mirror(int mirror) { - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n"); BUG(); } @@ -116,7 +116,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror); void omap_set_lcd_dma_b1_vxres(unsigned long vxres) { - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { printk(KERN_ERR "DMA virtual resulotion is not supported " "in 1510 mode\n"); BUG(); @@ -127,7 +127,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres); void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale) { - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { printk(KERN_ERR "DMA scale is not supported in 1510 mode\n"); BUG(); } @@ -177,7 +177,7 @@ static void set_b1_regs(void) bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); /* 1510 DMA requires the bottom address to be 2 more * than the actual last memory access location. */ - if (cpu_is_omap1510() && + if (cpu_is_omap15xx() && lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32) bottom += 2; ei = PIXSTEP(0, 0, 1, 0); @@ -241,7 +241,7 @@ static void set_b1_regs(void) return; /* Suppress warning about uninitialized vars */ } - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U); omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L); omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U); @@ -343,7 +343,7 @@ void omap_free_lcd_dma(void) BUG(); return; } - if (!cpu_is_omap1510()) + if (!cpu_is_omap15xx()) omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1, OMAP1610_DMA_LCD_CCR); lcd_dma.reserved = 0; @@ -360,7 +360,7 @@ void omap_enable_lcd_dma(void) * connected. Otherwise the OMAP internal controller will * start the transfer when it gets enabled. */ - if (cpu_is_omap1510() || !lcd_dma.ext_ctrl) + if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl) return; w = omap_readw(OMAP1610_DMA_LCD_CTRL); @@ -378,14 +378,14 @@ EXPORT_SYMBOL(omap_enable_lcd_dma); void omap_setup_lcd_dma(void) { BUG_ON(lcd_dma.active); - if (!cpu_is_omap1510()) { + if (!cpu_is_omap15xx()) { /* Set some reasonable defaults */ omap_writew(0x5440, OMAP1610_DMA_LCD_CCR); omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP); omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL); } set_b1_regs(); - if (!cpu_is_omap1510()) { + if (!cpu_is_omap15xx()) { u16 w; w = omap_readw(OMAP1610_DMA_LCD_CCR); @@ -407,7 +407,7 @@ void omap_stop_lcd_dma(void) u16 w; lcd_dma.active = 0; - if (cpu_is_omap1510() || !lcd_dma.ext_ctrl) + if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl) return; w = omap_readw(OMAP1610_DMA_LCD_CCR); -- cgit v1.2.3-18-g5258 From ed2af92bc3adf7f5c09edef64cf4383b3d60b070 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Wed, 5 Jan 2011 14:03:21 +0000 Subject: arm: omap4: panda: remove usb_nop_xceiv_register(v1) Panda uses both twl6030 otg phy(vbus, id) and internal phy(data lines, DP/DM), so removes usb_nop_xceiv_register to make twl6030 otg driver working since current otg code only supports one global transceiver. Otherwise, musb doesn't work without the remove. Reviewd-by: Felipe Balbi Signed-off-by: Ming Lei Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-omap4panda.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index e001a048dc0..e944025d5ef 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -409,8 +409,6 @@ static void __init omap4_panda_init(void) platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices)); omap_serial_init(); omap4_twl6030_hsmmc_init(mmc); - /* OMAP4 Panda uses internal transceiver so register nop transceiver */ - usb_nop_xceiv_register(); omap4_ehci_init(); usb_musb_init(&musb_board_data); } -- cgit v1.2.3-18-g5258 From a16ede35a2659170c855c5d267776666c0630f1f Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 16 Jan 2011 17:59:44 +0000 Subject: ARM: bitops: ensure set/clear/change bitops take a word-aligned pointer Add additional instructions to our assembly bitops functions to ensure that they only operate on word-aligned pointers. This will be necessary when we switch these operations to use the word-based exclusive operations. Signed-off-by: Russell King --- arch/arm/lib/bitops.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h index d42252918bf..bd00551fb79 100644 --- a/arch/arm/lib/bitops.h +++ b/arch/arm/lib/bitops.h @@ -1,6 +1,8 @@ #if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_CPU_32v6K) .macro bitop, instr + ands ip, r1, #3 + strneb r1, [ip] @ assert word-aligned mov r2, #1 and r3, r0, #7 @ Get bit offset add r1, r1, r0, lsr #3 @ Get byte offset @@ -14,6 +16,8 @@ .endm .macro testop, instr, store + ands ip, r1, #3 + strneb r1, [ip] @ assert word-aligned and r3, r0, #7 @ Get bit offset mov r2, #1 add r1, r1, r0, lsr #3 @ Get byte offset @@ -32,6 +36,8 @@ .endm #else .macro bitop, instr + ands ip, r1, #3 + strneb r1, [ip] @ assert word-aligned and r2, r0, #7 mov r3, #1 mov r3, r3, lsl r2 @@ -52,6 +58,8 @@ * to avoid dirtying the data cache. */ .macro testop, instr, store + ands ip, r1, #3 + strneb r1, [ip] @ assert word-aligned add r1, r1, r0, lsr #3 and r3, r0, #7 mov r0, #1 -- cgit v1.2.3-18-g5258 From 6323f0ccedf756dfe5f46549cec69a2d6d97937b Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 16 Jan 2011 18:02:17 +0000 Subject: ARM: bitops: switch set/clear/change bitops to use ldrex/strex Switch the set/clear/change bitops to use the word-based exclusive operations, which are only present in a wider range of ARM architectures than the byte-based exclusive operations. Tested record: - Nicolas Pitre: ext3,rw,le - Sourav Poddar: nfs,le - Will Deacon: ext3,rw,le - Tony Lindgren: ext3+nfs,le Reviewed-by: Nicolas Pitre Tested-by: Sourav Poddar Tested-by: Will Deacon Tested-by: Tony Lindgren Signed-off-by: Russell King --- arch/arm/include/asm/bitops.h | 60 ++++++++++++++++--------------------------- arch/arm/kernel/armksyms.c | 18 +++++-------- arch/arm/lib/bitops.h | 38 ++++++++++++++------------- arch/arm/lib/changebit.S | 10 ++------ arch/arm/lib/clearbit.S | 11 ++------ arch/arm/lib/setbit.S | 11 ++------ arch/arm/lib/testchangebit.S | 9 +++---- arch/arm/lib/testclearbit.S | 9 +++---- arch/arm/lib/testsetbit.S | 9 +++---- 9 files changed, 63 insertions(+), 112 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/bitops.h b/arch/arm/include/asm/bitops.h index 7b1bb2bbaf8..af54ed102f5 100644 --- a/arch/arm/include/asm/bitops.h +++ b/arch/arm/include/asm/bitops.h @@ -148,15 +148,19 @@ ____atomic_test_and_change_bit(unsigned int bit, volatile unsigned long *p) * Note that bit 0 is defined to be 32-bit word bit 0, not byte 0 bit 0. */ +/* + * Native endian assembly bitops. nr = 0 -> word 0 bit 0. + */ +extern void _set_bit(int nr, volatile unsigned long * p); +extern void _clear_bit(int nr, volatile unsigned long * p); +extern void _change_bit(int nr, volatile unsigned long * p); +extern int _test_and_set_bit(int nr, volatile unsigned long * p); +extern int _test_and_clear_bit(int nr, volatile unsigned long * p); +extern int _test_and_change_bit(int nr, volatile unsigned long * p); + /* * Little endian assembly bitops. nr = 0 -> byte 0 bit 0. */ -extern void _set_bit_le(int nr, volatile unsigned long * p); -extern void _clear_bit_le(int nr, volatile unsigned long * p); -extern void _change_bit_le(int nr, volatile unsigned long * p); -extern int _test_and_set_bit_le(int nr, volatile unsigned long * p); -extern int _test_and_clear_bit_le(int nr, volatile unsigned long * p); -extern int _test_and_change_bit_le(int nr, volatile unsigned long * p); extern int _find_first_zero_bit_le(const void * p, unsigned size); extern int _find_next_zero_bit_le(const void * p, int size, int offset); extern int _find_first_bit_le(const unsigned long *p, unsigned size); @@ -165,12 +169,6 @@ extern int _find_next_bit_le(const unsigned long *p, int size, int offset); /* * Big endian assembly bitops. nr = 0 -> byte 3 bit 0. */ -extern void _set_bit_be(int nr, volatile unsigned long * p); -extern void _clear_bit_be(int nr, volatile unsigned long * p); -extern void _change_bit_be(int nr, volatile unsigned long * p); -extern int _test_and_set_bit_be(int nr, volatile unsigned long * p); -extern int _test_and_clear_bit_be(int nr, volatile unsigned long * p); -extern int _test_and_change_bit_be(int nr, volatile unsigned long * p); extern int _find_first_zero_bit_be(const void * p, unsigned size); extern int _find_next_zero_bit_be(const void * p, int size, int offset); extern int _find_first_bit_be(const unsigned long *p, unsigned size); @@ -180,33 +178,26 @@ extern int _find_next_bit_be(const unsigned long *p, int size, int offset); /* * The __* form of bitops are non-atomic and may be reordered. */ -#define ATOMIC_BITOP_LE(name,nr,p) \ - (__builtin_constant_p(nr) ? \ - ____atomic_##name(nr, p) : \ - _##name##_le(nr,p)) - -#define ATOMIC_BITOP_BE(name,nr,p) \ - (__builtin_constant_p(nr) ? \ - ____atomic_##name(nr, p) : \ - _##name##_be(nr,p)) +#define ATOMIC_BITOP(name,nr,p) \ + (__builtin_constant_p(nr) ? ____atomic_##name(nr, p) : _##name(nr,p)) #else -#define ATOMIC_BITOP_LE(name,nr,p) _##name##_le(nr,p) -#define ATOMIC_BITOP_BE(name,nr,p) _##name##_be(nr,p) +#define ATOMIC_BITOP(name,nr,p) _##name(nr,p) #endif -#define NONATOMIC_BITOP(name,nr,p) \ - (____nonatomic_##name(nr, p)) +/* + * Native endian atomic definitions. + */ +#define set_bit(nr,p) ATOMIC_BITOP(set_bit,nr,p) +#define clear_bit(nr,p) ATOMIC_BITOP(clear_bit,nr,p) +#define change_bit(nr,p) ATOMIC_BITOP(change_bit,nr,p) +#define test_and_set_bit(nr,p) ATOMIC_BITOP(test_and_set_bit,nr,p) +#define test_and_clear_bit(nr,p) ATOMIC_BITOP(test_and_clear_bit,nr,p) +#define test_and_change_bit(nr,p) ATOMIC_BITOP(test_and_change_bit,nr,p) #ifndef __ARMEB__ /* * These are the little endian, atomic definitions. */ -#define set_bit(nr,p) ATOMIC_BITOP_LE(set_bit,nr,p) -#define clear_bit(nr,p) ATOMIC_BITOP_LE(clear_bit,nr,p) -#define change_bit(nr,p) ATOMIC_BITOP_LE(change_bit,nr,p) -#define test_and_set_bit(nr,p) ATOMIC_BITOP_LE(test_and_set_bit,nr,p) -#define test_and_clear_bit(nr,p) ATOMIC_BITOP_LE(test_and_clear_bit,nr,p) -#define test_and_change_bit(nr,p) ATOMIC_BITOP_LE(test_and_change_bit,nr,p) #define find_first_zero_bit(p,sz) _find_first_zero_bit_le(p,sz) #define find_next_zero_bit(p,sz,off) _find_next_zero_bit_le(p,sz,off) #define find_first_bit(p,sz) _find_first_bit_le(p,sz) @@ -215,16 +206,9 @@ extern int _find_next_bit_be(const unsigned long *p, int size, int offset); #define WORD_BITOFF_TO_LE(x) ((x)) #else - /* * These are the big endian, atomic definitions. */ -#define set_bit(nr,p) ATOMIC_BITOP_BE(set_bit,nr,p) -#define clear_bit(nr,p) ATOMIC_BITOP_BE(clear_bit,nr,p) -#define change_bit(nr,p) ATOMIC_BITOP_BE(change_bit,nr,p) -#define test_and_set_bit(nr,p) ATOMIC_BITOP_BE(test_and_set_bit,nr,p) -#define test_and_clear_bit(nr,p) ATOMIC_BITOP_BE(test_and_clear_bit,nr,p) -#define test_and_change_bit(nr,p) ATOMIC_BITOP_BE(test_and_change_bit,nr,p) #define find_first_zero_bit(p,sz) _find_first_zero_bit_be(p,sz) #define find_next_zero_bit(p,sz,off) _find_next_zero_bit_be(p,sz,off) #define find_first_bit(p,sz) _find_first_bit_be(p,sz) diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index e5e1e538767..d5d4185f0c2 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -140,24 +140,18 @@ EXPORT_SYMBOL(__aeabi_ulcmp); #endif /* bitops */ -EXPORT_SYMBOL(_set_bit_le); -EXPORT_SYMBOL(_test_and_set_bit_le); -EXPORT_SYMBOL(_clear_bit_le); -EXPORT_SYMBOL(_test_and_clear_bit_le); -EXPORT_SYMBOL(_change_bit_le); -EXPORT_SYMBOL(_test_and_change_bit_le); +EXPORT_SYMBOL(_set_bit); +EXPORT_SYMBOL(_test_and_set_bit); +EXPORT_SYMBOL(_clear_bit); +EXPORT_SYMBOL(_test_and_clear_bit); +EXPORT_SYMBOL(_change_bit); +EXPORT_SYMBOL(_test_and_change_bit); EXPORT_SYMBOL(_find_first_zero_bit_le); EXPORT_SYMBOL(_find_next_zero_bit_le); EXPORT_SYMBOL(_find_first_bit_le); EXPORT_SYMBOL(_find_next_bit_le); #ifdef __ARMEB__ -EXPORT_SYMBOL(_set_bit_be); -EXPORT_SYMBOL(_test_and_set_bit_be); -EXPORT_SYMBOL(_clear_bit_be); -EXPORT_SYMBOL(_test_and_clear_bit_be); -EXPORT_SYMBOL(_change_bit_be); -EXPORT_SYMBOL(_test_and_change_bit_be); EXPORT_SYMBOL(_find_first_zero_bit_be); EXPORT_SYMBOL(_find_next_zero_bit_be); EXPORT_SYMBOL(_find_first_bit_be); diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h index bd00551fb79..a9d9d152a75 100644 --- a/arch/arm/lib/bitops.h +++ b/arch/arm/lib/bitops.h @@ -1,15 +1,15 @@ - -#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_CPU_32v6K) +#if __LINUX_ARM_ARCH__ >= 6 .macro bitop, instr ands ip, r1, #3 strneb r1, [ip] @ assert word-aligned mov r2, #1 - and r3, r0, #7 @ Get bit offset - add r1, r1, r0, lsr #3 @ Get byte offset + and r3, r0, #31 @ Get bit offset + mov r0, r0, lsr #5 + add r1, r1, r0, lsl #2 @ Get word offset mov r3, r2, lsl r3 -1: ldrexb r2, [r1] +1: ldrex r2, [r1] \instr r2, r2, r3 - strexb r0, r2, [r1] + strex r0, r2, [r1] cmp r0, #0 bne 1b mov pc, lr @@ -18,15 +18,16 @@ .macro testop, instr, store ands ip, r1, #3 strneb r1, [ip] @ assert word-aligned - and r3, r0, #7 @ Get bit offset mov r2, #1 - add r1, r1, r0, lsr #3 @ Get byte offset + and r3, r0, #31 @ Get bit offset + mov r0, r0, lsr #5 + add r1, r1, r0, lsl #2 @ Get word offset mov r3, r2, lsl r3 @ create mask smp_dmb -1: ldrexb r2, [r1] +1: ldrex r2, [r1] ands r0, r2, r3 @ save old value of bit - \instr r2, r2, r3 @ toggle bit - strexb ip, r2, [r1] + \instr r2, r2, r3 @ toggle bit + strex ip, r2, [r1] cmp ip, #0 bne 1b smp_dmb @@ -38,13 +39,14 @@ .macro bitop, instr ands ip, r1, #3 strneb r1, [ip] @ assert word-aligned - and r2, r0, #7 + and r2, r0, #31 + mov r0, r0, lsr #5 mov r3, #1 mov r3, r3, lsl r2 save_and_disable_irqs ip - ldrb r2, [r1, r0, lsr #3] + ldr r2, [r1, r0, lsl #2] \instr r2, r2, r3 - strb r2, [r1, r0, lsr #3] + str r2, [r1, r0, lsl #2] restore_irqs ip mov pc, lr .endm @@ -60,11 +62,11 @@ .macro testop, instr, store ands ip, r1, #3 strneb r1, [ip] @ assert word-aligned - add r1, r1, r0, lsr #3 - and r3, r0, #7 - mov r0, #1 + and r3, r0, #31 + mov r0, r0, lsr #5 save_and_disable_irqs ip - ldrb r2, [r1] + ldr r2, [r1, r0, lsl #2]! + mov r0, #1 tst r2, r0, lsl r3 \instr r2, r2, r0, lsl r3 \store r2, [r1] diff --git a/arch/arm/lib/changebit.S b/arch/arm/lib/changebit.S index 80f3115cbee..68ed5b62e83 100644 --- a/arch/arm/lib/changebit.S +++ b/arch/arm/lib/changebit.S @@ -12,12 +12,6 @@ #include "bitops.h" .text -/* Purpose : Function to change a bit - * Prototype: int change_bit(int bit, void *addr) - */ -ENTRY(_change_bit_be) - eor r0, r0, #0x18 @ big endian byte ordering -ENTRY(_change_bit_le) +ENTRY(_change_bit) bitop eor -ENDPROC(_change_bit_be) -ENDPROC(_change_bit_le) +ENDPROC(_change_bit) diff --git a/arch/arm/lib/clearbit.S b/arch/arm/lib/clearbit.S index 1a63e43a1df..4c04c3b51ee 100644 --- a/arch/arm/lib/clearbit.S +++ b/arch/arm/lib/clearbit.S @@ -12,13 +12,6 @@ #include "bitops.h" .text -/* - * Purpose : Function to clear a bit - * Prototype: int clear_bit(int bit, void *addr) - */ -ENTRY(_clear_bit_be) - eor r0, r0, #0x18 @ big endian byte ordering -ENTRY(_clear_bit_le) +ENTRY(_clear_bit) bitop bic -ENDPROC(_clear_bit_be) -ENDPROC(_clear_bit_le) +ENDPROC(_clear_bit) diff --git a/arch/arm/lib/setbit.S b/arch/arm/lib/setbit.S index 1dd7176c4b2..bbee5c66a23 100644 --- a/arch/arm/lib/setbit.S +++ b/arch/arm/lib/setbit.S @@ -12,13 +12,6 @@ #include "bitops.h" .text -/* - * Purpose : Function to set a bit - * Prototype: int set_bit(int bit, void *addr) - */ -ENTRY(_set_bit_be) - eor r0, r0, #0x18 @ big endian byte ordering -ENTRY(_set_bit_le) +ENTRY(_set_bit) bitop orr -ENDPROC(_set_bit_be) -ENDPROC(_set_bit_le) +ENDPROC(_set_bit) diff --git a/arch/arm/lib/testchangebit.S b/arch/arm/lib/testchangebit.S index 5c98dc567f0..15a4d431f22 100644 --- a/arch/arm/lib/testchangebit.S +++ b/arch/arm/lib/testchangebit.S @@ -12,9 +12,6 @@ #include "bitops.h" .text -ENTRY(_test_and_change_bit_be) - eor r0, r0, #0x18 @ big endian byte ordering -ENTRY(_test_and_change_bit_le) - testop eor, strb -ENDPROC(_test_and_change_bit_be) -ENDPROC(_test_and_change_bit_le) +ENTRY(_test_and_change_bit) + testop eor, str +ENDPROC(_test_and_change_bit) diff --git a/arch/arm/lib/testclearbit.S b/arch/arm/lib/testclearbit.S index 543d7094d18..521b66b5b95 100644 --- a/arch/arm/lib/testclearbit.S +++ b/arch/arm/lib/testclearbit.S @@ -12,9 +12,6 @@ #include "bitops.h" .text -ENTRY(_test_and_clear_bit_be) - eor r0, r0, #0x18 @ big endian byte ordering -ENTRY(_test_and_clear_bit_le) - testop bicne, strneb -ENDPROC(_test_and_clear_bit_be) -ENDPROC(_test_and_clear_bit_le) +ENTRY(_test_and_clear_bit) + testop bicne, strne +ENDPROC(_test_and_clear_bit) diff --git a/arch/arm/lib/testsetbit.S b/arch/arm/lib/testsetbit.S index 0b3f390401c..1c98cc2185b 100644 --- a/arch/arm/lib/testsetbit.S +++ b/arch/arm/lib/testsetbit.S @@ -12,9 +12,6 @@ #include "bitops.h" .text -ENTRY(_test_and_set_bit_be) - eor r0, r0, #0x18 @ big endian byte ordering -ENTRY(_test_and_set_bit_le) - testop orreq, streqb -ENDPROC(_test_and_set_bit_be) -ENDPROC(_test_and_set_bit_le) +ENTRY(_test_and_set_bit) + testop orreq, streq +ENDPROC(_test_and_set_bit) -- cgit v1.2.3-18-g5258 From 000d9c78eb5cd7f18e3d6a381d66e606bc9b8196 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 15 Jan 2011 16:22:12 +0000 Subject: ARM: v6k: remove CPU_32v6K dependencies in asm/spinlock.h SMP requires at least the ARMv6K extensions to be present, so if we're running on SMP, the WFE and SEV instructions must be available. However, when we run on UP, the v6K extensions may not be available, and so we don't want WFE/SEV to be in the instruction stream. Use the SMP alternatives infrastructure to replace these instructions with NOPs if we build for SMP but run on UP. Tested-by: Tony Lindgren Tested-by: Sourav Poddar Tested-by: Will Deacon Signed-off-by: Russell King --- arch/arm/include/asm/spinlock.h | 37 +++++++++++++++++++++++++------------ 1 file changed, 25 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/spinlock.h b/arch/arm/include/asm/spinlock.h index 17eb355707d..da1af524015 100644 --- a/arch/arm/include/asm/spinlock.h +++ b/arch/arm/include/asm/spinlock.h @@ -5,17 +5,36 @@ #error SMP not supported on pre-ARMv6 CPUs #endif +/* + * sev and wfe are ARMv6K extensions. Uniprocessor ARMv6 may not have the K + * extensions, so when running on UP, we have to patch these instructions away. + */ +#define ALT_SMP(smp, up) \ + "9998: " smp "\n" \ + " .pushsection \".alt.smp.init\", \"a\"\n" \ + " .long 9998b\n" \ + " " up "\n" \ + " .popsection\n" + +#ifdef CONFIG_THUMB2_KERNEL +#define SEV ALT_SMP("sev.w", "nop.w") +#define WFE(cond) ALT_SMP("wfe" cond ".w", "nop.w") +#else +#define SEV ALT_SMP("sev", "nop") +#define WFE(cond) ALT_SMP("wfe" cond, "nop") +#endif + static inline void dsb_sev(void) { #if __LINUX_ARM_ARCH__ >= 7 __asm__ __volatile__ ( "dsb\n" - "sev" + SEV ); -#elif defined(CONFIG_CPU_32v6K) +#else __asm__ __volatile__ ( "mcr p15, 0, %0, c7, c10, 4\n" - "sev" + SEV : : "r" (0) ); #endif @@ -46,9 +65,7 @@ static inline void arch_spin_lock(arch_spinlock_t *lock) __asm__ __volatile__( "1: ldrex %0, [%1]\n" " teq %0, #0\n" -#ifdef CONFIG_CPU_32v6K -" wfene\n" -#endif + WFE("ne") " strexeq %0, %2, [%1]\n" " teqeq %0, #0\n" " bne 1b" @@ -107,9 +124,7 @@ static inline void arch_write_lock(arch_rwlock_t *rw) __asm__ __volatile__( "1: ldrex %0, [%1]\n" " teq %0, #0\n" -#ifdef CONFIG_CPU_32v6K -" wfene\n" -#endif + WFE("ne") " strexeq %0, %2, [%1]\n" " teq %0, #0\n" " bne 1b" @@ -176,9 +191,7 @@ static inline void arch_read_lock(arch_rwlock_t *rw) "1: ldrex %0, [%2]\n" " adds %0, %0, #1\n" " strexpl %1, %0, [%2]\n" -#ifdef CONFIG_CPU_32v6K -" wfemi\n" -#endif + WFE("mi") " rsbpls %0, %1, #0\n" " bmi 1b" : "=&r" (tmp), "=&r" (tmp2) -- cgit v1.2.3-18-g5258 From e399b1a4e1d205bdc816cb550d2064f2eb1ddc4c Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 17 Jan 2011 15:08:32 +0000 Subject: ARM: v6k: introduce CPU_V6K option Introduce a CPU_V6K configuration option for platforms to select if they have a V6K CPU core. This allows us to identify whether we need to support ARMv6 CPUs without the V6K SMP extensions at build time. Currently CPU_V6K is just an alias for CPU_V6, and all places which reference CPU_V6 are replaced by (CPU_V6 || CPU_V6K). Select CPU_V6K from platforms which are known to be V6K-only. Acked-by: Tony Lindgren Tested-by: Sourav Poddar Tested-by: Will Deacon Signed-off-by: Russell King --- arch/arm/Kconfig | 10 ++++----- arch/arm/Makefile | 1 + arch/arm/boot/compressed/head.S | 2 +- arch/arm/boot/compressed/misc.c | 2 +- arch/arm/include/asm/cacheflush.h | 5 +++-- arch/arm/include/asm/proc-fns.h | 2 +- arch/arm/kernel/debug.S | 2 +- arch/arm/kernel/perf_event_v6.c | 4 ++-- arch/arm/mm/Kconfig | 47 +++++++++++++++++++++++++-------------- arch/arm/mm/Makefile | 1 + arch/arm/mm/mmap.c | 2 +- 11 files changed, 47 insertions(+), 31 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5cff165b7eb..95ba92ff0d4 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -24,7 +24,7 @@ config ARM select HAVE_PERF_EVENTS select PERF_USE_VMALLOC select HAVE_REGS_AND_STACK_ACCESS_API - select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V7)) + select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)) select HAVE_C_RECORDMCOUNT select HAVE_GENERIC_HARDIRQS select HAVE_SPARSE_IRQ @@ -1048,7 +1048,7 @@ config XSCALE_PMU default y config CPU_HAS_PMU - depends on (CPU_V6 || CPU_V7 || XSCALE_PMU) && \ + depends on (CPU_V6 || CPU_V6K || CPU_V7 || XSCALE_PMU) && \ (!ARCH_OMAP3 || OMAP3_EMU) default y bool @@ -1064,7 +1064,7 @@ endif config ARM_ERRATA_411920 bool "ARM errata: Invalidation of the Instruction Cache operation can fail" - depends on CPU_V6 + depends on CPU_V6 || CPU_V6K help Invalidation of the Instruction Cache operation can fail. This erratum is present in 1136 (before r1p4), 1156 and 1176. @@ -1361,7 +1361,7 @@ config HZ config THUMB2_KERNEL bool "Compile the kernel in Thumb-2 mode (EXPERIMENTAL)" - depends on CPU_V7 && !CPU_V6 && EXPERIMENTAL + depends on CPU_V7 && !CPU_V6 && !CPU_V6K && EXPERIMENTAL select AEABI select ARM_ASM_UNIFIED help @@ -1852,7 +1852,7 @@ config FPE_FASTFPE config VFP bool "VFP-format floating point maths" - depends on CPU_V6 || CPU_ARM926T || CPU_V7 || CPU_FEROCEON + depends on CPU_V6 || CPU_V6K || CPU_ARM926T || CPU_V7 || CPU_FEROCEON help Say Y to include VFP support code in the kernel. This is needed if your hardware includes a VFP unit. diff --git a/arch/arm/Makefile b/arch/arm/Makefile index c22c1adfedd..9c430525e13 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -89,6 +89,7 @@ tune-$(CONFIG_CPU_XSCALE) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) tune-$(CONFIG_CPU_XSC3) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale tune-$(CONFIG_CPU_FEROCEON) :=$(call cc-option,-mtune=marvell-f,-mtune=xscale) tune-$(CONFIG_CPU_V6) :=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm) +tune-$(CONFIG_CPU_V6K) :=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm) ifeq ($(CONFIG_AEABI),y) CFLAGS_ABI :=-mabi=aapcs-linux -mno-thumb-interwork diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 7193884ed8b..91f20f0b304 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -21,7 +21,7 @@ #if defined(CONFIG_DEBUG_ICEDCC) -#ifdef CONFIG_CPU_V6 +#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) .macro loadsp, rb, tmp .endm .macro writeb, ch, rb diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c index e653a6d3c8d..4657e877bf8 100644 --- a/arch/arm/boot/compressed/misc.c +++ b/arch/arm/boot/compressed/misc.c @@ -36,7 +36,7 @@ extern void error(char *x); #ifdef CONFIG_DEBUG_ICEDCC -#ifdef CONFIG_CPU_V6 +#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) static void icedcc_putc(int ch) { diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index 3acd8fa25e3..7d0614f599a 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -116,7 +116,7 @@ # define MULTI_CACHE 1 #endif -#if defined(CONFIG_CPU_V6) +#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) //# ifdef _CACHE # define MULTI_CACHE 1 //# else @@ -316,7 +316,8 @@ extern void copy_to_user_page(struct vm_area_struct *, struct page *, * Optimized __flush_icache_all for the common cases. Note that UP ARMv7 * will fall through to use __flush_icache_all_generic. */ -#if (defined(CONFIG_CPU_V7) && defined(CONFIG_CPU_V6)) || \ +#if (defined(CONFIG_CPU_V7) && \ + (defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K))) || \ defined(CONFIG_SMP_ON_UP) #define __flush_icache_preferred __cpuc_flush_icache_all #elif __LINUX_ARM_ARCH__ >= 7 && defined(CONFIG_SMP) diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h index 8fdae9bc9ab..296ca47489f 100644 --- a/arch/arm/include/asm/proc-fns.h +++ b/arch/arm/include/asm/proc-fns.h @@ -231,7 +231,7 @@ # endif #endif -#ifdef CONFIG_CPU_V6 +#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) # ifdef CPU_NAME # undef MULTI_CPU # define MULTI_CPU diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S index a0f07521ca8..d2d983be096 100644 --- a/arch/arm/kernel/debug.S +++ b/arch/arm/kernel/debug.S @@ -25,7 +25,7 @@ .macro addruart, rp, rv .endm -#if defined(CONFIG_CPU_V6) +#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) .macro senduart, rd, rx mcr p14, 0, \rd, c0, c5, 0 diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c index c058bfc8532..6fc2d228db5 100644 --- a/arch/arm/kernel/perf_event_v6.c +++ b/arch/arm/kernel/perf_event_v6.c @@ -30,7 +30,7 @@ * enable the interrupt. */ -#ifdef CONFIG_CPU_V6 +#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) enum armv6_perf_types { ARMV6_PERFCTR_ICACHE_MISS = 0x0, ARMV6_PERFCTR_IBUF_STALL = 0x1, @@ -669,4 +669,4 @@ static const struct arm_pmu *__init armv6mpcore_pmu_init(void) { return NULL; } -#endif /* CONFIG_CPU_V6 */ +#endif /* CONFIG_CPU_V6 || CONFIG_CPU_V6K */ diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 9d30c6f804b..559e9330bb1 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -402,16 +402,18 @@ config CPU_V6 select CPU_TLB_V6 if MMU # ARMv6k -config CPU_32v6K - bool "Support ARM V6K processor extensions" if !SMP - depends on CPU_V6 || CPU_V7 - default y if SMP && !(ARCH_MX3 || ARCH_OMAP2) - help - Say Y here if your ARMv6 processor supports the 'K' extension. - This enables the kernel to use some instructions not present - on previous processors, and as such a kernel build with this - enabled will not boot on processors with do not support these - instructions. +config CPU_V6K + bool "Support ARM V6K processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX || ARCH_DOVE + select CPU_32v6 + select CPU_32v6K if !ARCH_OMAP2 + select CPU_ABRT_EV6 + select CPU_PABRT_V6 + select CPU_CACHE_V6 + select CPU_CACHE_VIPT + select CPU_CP15_MMU + select CPU_HAS_ASID if MMU + select CPU_COPY_V6 if MMU + select CPU_TLB_V6 if MMU # ARMv7 config CPU_V7 @@ -453,6 +455,17 @@ config CPU_32v6 bool select TLS_REG_EMUL if !CPU_32v6K && !MMU +config CPU_32v6K + bool "Support ARM V6K processor extensions" if !SMP + depends on CPU_V6 || CPU_V6K || CPU_V7 + default y if SMP && !(ARCH_MX3 || ARCH_OMAP2) + help + Say Y here if your ARMv6 processor supports the 'K' extension. + This enables the kernel to use some instructions not present + on previous processors, and as such a kernel build with this + enabled will not boot on processors with do not support these + instructions. + config CPU_32v7 bool @@ -623,7 +636,7 @@ comment "Processor Features" config ARM_THUMB bool "Support Thumb user binaries" - depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_V6 || CPU_V7 || CPU_FEROCEON + depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_V6 || CPU_V6K || CPU_V7 || CPU_FEROCEON default y help Say Y if you want to include kernel support for running user space @@ -681,7 +694,7 @@ config CPU_BIG_ENDIAN config CPU_ENDIAN_BE8 bool depends on CPU_BIG_ENDIAN - default CPU_V6 || CPU_V7 + default CPU_V6 || CPU_V6K || CPU_V7 help Support for the BE-8 (big-endian) mode on ARMv6 and ARMv7 processors. @@ -747,7 +760,7 @@ config CPU_CACHE_ROUND_ROBIN config CPU_BPREDICT_DISABLE bool "Disable branch prediction" - depends on CPU_ARM1020 || CPU_V6 || CPU_MOHAWK || CPU_XSC3 || CPU_V7 || CPU_FA526 + depends on CPU_ARM1020 || CPU_V6 || CPU_V6K || CPU_MOHAWK || CPU_XSC3 || CPU_V7 || CPU_FA526 help Say Y here to disable branch prediction. If unsure, say N. @@ -767,7 +780,7 @@ config NEEDS_SYSCALL_FOR_CMPXCHG config DMA_CACHE_RWFO bool "Enable read/write for ownership DMA cache maintenance" - depends on CPU_V6 && SMP + depends on (CPU_V6 || CPU_V6K) && SMP default y help The Snoop Control Unit on ARM11MPCore does not detect the @@ -823,7 +836,7 @@ config CACHE_L2X0 config CACHE_PL310 bool depends on CACHE_L2X0 - default y if CPU_V7 && !CPU_V6 + default y if CPU_V7 && !(CPU_V6 || CPU_V6K) help This option enables optimisations for the PL310 cache controller. @@ -851,10 +864,10 @@ config ARM_L1_CACHE_SHIFT default 5 config ARM_DMA_MEM_BUFFERABLE - bool "Use non-cacheable memory for DMA" if CPU_V6 && !CPU_V7 + bool "Use non-cacheable memory for DMA" if (CPU_V6 || CPU_V6K) && !CPU_V7 depends on !(MACH_REALVIEW_PB1176 || REALVIEW_EB_ARM11MP || \ MACH_REALVIEW_PB11MP) - default y if CPU_V6 || CPU_V7 + default y if CPU_V6 || CPU_V6K || CPU_V7 help Historically, the kernel has used strongly ordered mappings to provide DMA coherent memory. With the advent of ARMv7, mapping diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index 00d74a04af3..bca7e61928c 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -90,6 +90,7 @@ obj-$(CONFIG_CPU_XSC3) += proc-xsc3.o obj-$(CONFIG_CPU_MOHAWK) += proc-mohawk.o obj-$(CONFIG_CPU_FEROCEON) += proc-feroceon.o obj-$(CONFIG_CPU_V6) += proc-v6.o +obj-$(CONFIG_CPU_V6K) += proc-v6.o obj-$(CONFIG_CPU_V7) += proc-v7.o AFLAGS_proc-v6.o :=-Wa,-march=armv6 diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index b0a98305055..afe209e1e1f 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -31,7 +31,7 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, struct mm_struct *mm = current->mm; struct vm_area_struct *vma; unsigned long start_addr; -#ifdef CONFIG_CPU_V6 +#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) unsigned int cache_type; int do_align = 0, aliasing = 0; -- cgit v1.2.3-18-g5258 From 74200e6421882bfb53677d63a134d89a919815c1 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 17 Jan 2011 18:23:31 +0000 Subject: ARM: v6k: Realview EB 11MPCore and PB11MPCore use V6K architecture CPUs Make Realview EB ARM11MPCore and PB11MPCore select the new V6K CPU option. Tested-by: Will Deacon Signed-off-by: Russell King --- arch/arm/mach-realview/Kconfig | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index 7ca138a943a..b9a9805e482 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -19,7 +19,7 @@ config REALVIEW_EB_A9MP config REALVIEW_EB_ARM11MP bool "Support ARM11MPCore Tile" depends on MACH_REALVIEW_EB - select CPU_V6 + select CPU_V6K select ARCH_HAS_BARRIERS if SMP help Enable support for the ARM11MPCore tile fitted to the Realview(R) @@ -36,7 +36,7 @@ config REALVIEW_EB_ARM11MP_REVB config MACH_REALVIEW_PB11MP bool "Support RealView(R) Platform Baseboard for ARM11MPCore" - select CPU_V6 + select CPU_V6K select ARM_GIC select HAVE_PATA_PLATFORM select ARCH_HAS_BARRIERS if SMP @@ -45,6 +45,7 @@ config MACH_REALVIEW_PB11MP the ARM11MPCore. This platform has an on-board ARM11MPCore and has support for PCI-E and Compact Flash. +# ARMv6 CPU without K extensions, but does have the new exclusive ops config MACH_REALVIEW_PB1176 bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S" select CPU_V6 -- cgit v1.2.3-18-g5258 From c786282e6dd18fe2ff43ab44411085dc40e7fbc5 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 17 Jan 2011 18:20:05 +0000 Subject: ARM: v6k: Dove platforms use V6K architecture CPUs Make Dove platforms select the new V6K CPU option. Tested-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/Kconfig | 1 + arch/arm/mach-dove/Kconfig | 2 +- arch/arm/mm/Kconfig | 4 ++-- 3 files changed, 4 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 95ba92ff0d4..7a5fe5d131d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -457,6 +457,7 @@ config ARCH_IXP4XX config ARCH_DOVE bool "Marvell Dove" + select CPU_V6K select PCI select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig index a4ed3900912..dd937c526a4 100644 --- a/arch/arm/mach-dove/Kconfig +++ b/arch/arm/mach-dove/Kconfig @@ -9,7 +9,7 @@ config MACH_DOVE_DB Say 'Y' here if you want your kernel to support the Marvell DB-MV88AP510 Development Board. - config MACH_CM_A510 +config MACH_CM_A510 bool "CompuLab CM-A510 Board" help Say 'Y' here if you want your kernel to support the diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 559e9330bb1..22a3f4ad6ae 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -390,7 +390,7 @@ config CPU_PJ4 # ARMv6 config CPU_V6 - bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX || ARCH_DOVE + bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX select CPU_32v6 select CPU_ABRT_EV6 select CPU_PABRT_V6 @@ -403,7 +403,7 @@ config CPU_V6 # ARMv6k config CPU_V6K - bool "Support ARM V6K processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX || ARCH_DOVE + bool "Support ARM V6K processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX select CPU_32v6 select CPU_32v6K if !ARCH_OMAP2 select CPU_ABRT_EV6 -- cgit v1.2.3-18-g5258 From 7db44c75a241c18d03e82540c5b825216d4c668b Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 17 Jan 2011 15:35:37 +0000 Subject: ARM: v6k: select clear exclusive code seqences according to V6 variants If CONFIG_CPU_V6 is enabled, then the kernel must support ARMv6 CPUs which don't have the V6K extensions implemented. Always use the dummy store-exclusive method to ensure that the exclusive monitors are cleared. If CONFIG_CPU_V6 is not set, but CONFIG_CPU_32v6K is enabled, then we have the K extensions available on all CPUs we're building support for, so we can use the new clear-exclusive instruction. Acked-by: Tony Lindgren Tested-by: Sourav Poddar Tested-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/entry-header.S | 14 +++++++------- arch/arm/mm/abort-ev6.S | 6 +++--- 2 files changed, 10 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S index ae946490016..051166c2a93 100644 --- a/arch/arm/kernel/entry-header.S +++ b/arch/arm/kernel/entry-header.S @@ -76,13 +76,13 @@ #ifndef CONFIG_THUMB2_KERNEL .macro svc_exit, rpsr msr spsr_cxsf, \rpsr -#if defined(CONFIG_CPU_32v6K) - clrex @ clear the exclusive monitor - ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr -#elif defined (CONFIG_CPU_V6) +#if defined(CONFIG_CPU_V6) ldr r0, [sp] strex r1, r2, [sp] @ clear the exclusive monitor ldmib sp, {r1 - pc}^ @ load r1 - pc, cpsr +#elif defined(CONFIG_CPU_32v6K) + clrex @ clear the exclusive monitor + ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr #else ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr #endif @@ -92,10 +92,10 @@ ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr ldr lr, [sp, #\offset + S_PC]! @ get pc msr spsr_cxsf, r1 @ save in spsr_svc -#if defined(CONFIG_CPU_32v6K) - clrex @ clear the exclusive monitor -#elif defined (CONFIG_CPU_V6) +#if defined(CONFIG_CPU_V6) strex r1, r2, [sp] @ clear the exclusive monitor +#elif defined(CONFIG_CPU_32v6K) + clrex @ clear the exclusive monitor #endif .if \fast ldmdb sp, {r1 - lr}^ @ get calling r1 - lr diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S index f332df7f0d3..1478aa52214 100644 --- a/arch/arm/mm/abort-ev6.S +++ b/arch/arm/mm/abort-ev6.S @@ -20,11 +20,11 @@ */ .align 5 ENTRY(v6_early_abort) -#ifdef CONFIG_CPU_32v6K - clrex -#else +#ifdef CONFIG_CPU_V6 sub r1, sp, #4 @ Get unused stack location strex r0, r1, [r1] @ Clear the exclusive monitor +#elif defined(CONFIG_CPU_32v6K) + clrex #endif mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR -- cgit v1.2.3-18-g5258 From 4ed67a53591db641543d57f31c182591a429dc93 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 17 Jan 2011 15:42:42 +0000 Subject: ARM: v6k: select cmpxchg code sequences according to V6 variants If CONFIG_CPU_V6 is enabled, we must avoid the byte/halfword/doubleword exclusive operations, which aren't implemented before V6K. Use the generic versions (or omit them) instead. If CONFIG_CPU_V6 is not set, but CONFIG_CPU_32v6K is enabled, we have the K extnesions, so use these new instructions. Acked-by: Tony Lindgren Tested-by: Sourav Poddar Tested-by: Will Deacon Signed-off-by: Russell King --- arch/arm/include/asm/system.h | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 97f6d60297d..9a87823642d 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -347,6 +347,7 @@ void cpu_idle_wait(void); #include #if __LINUX_ARM_ARCH__ < 6 +/* min ARCH < ARMv6 */ #ifdef CONFIG_SMP #error "SMP is not supported on this platform" @@ -365,7 +366,7 @@ void cpu_idle_wait(void); #include #endif -#else /* __LINUX_ARM_ARCH__ >= 6 */ +#else /* min ARCH >= ARMv6 */ extern void __bad_cmpxchg(volatile void *ptr, int size); @@ -379,7 +380,7 @@ static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old, unsigned long oldval, res; switch (size) { -#ifdef CONFIG_CPU_32v6K +#ifndef CONFIG_CPU_V6 /* min ARCH >= ARMv6K */ case 1: do { asm volatile("@ __cmpxchg1\n" @@ -404,7 +405,7 @@ static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old, : "memory", "cc"); } while (res); break; -#endif /* CONFIG_CPU_32v6K */ +#endif case 4: do { asm volatile("@ __cmpxchg4\n" @@ -450,12 +451,12 @@ static inline unsigned long __cmpxchg_local(volatile void *ptr, unsigned long ret; switch (size) { -#ifndef CONFIG_CPU_32v6K +#ifdef CONFIG_CPU_V6 /* min ARCH == ARMv6 */ case 1: case 2: ret = __cmpxchg_local_generic(ptr, old, new, size); break; -#endif /* !CONFIG_CPU_32v6K */ +#endif default: ret = __cmpxchg(ptr, old, new, size); } @@ -469,7 +470,7 @@ static inline unsigned long __cmpxchg_local(volatile void *ptr, (unsigned long)(n), \ sizeof(*(ptr)))) -#ifdef CONFIG_CPU_32v6K +#ifndef CONFIG_CPU_V6 /* min ARCH >= ARMv6K */ /* * Note : ARMv7-M (currently unsupported by Linux) does not support @@ -524,11 +525,11 @@ static inline unsigned long long __cmpxchg64_mb(volatile void *ptr, (unsigned long long)(o), \ (unsigned long long)(n))) -#else /* !CONFIG_CPU_32v6K */ +#else /* min ARCH = ARMv6 */ #define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) -#endif /* CONFIG_CPU_32v6K */ +#endif #endif /* __LINUX_ARM_ARCH__ >= 6 */ -- cgit v1.2.3-18-g5258 From a41297a0ffb43fda0a565bdd3ee405d16505820c Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 17 Jan 2011 15:48:33 +0000 Subject: ARM: v6k: select generic atomic64 code according to V6 variants If CONFIG_CPU_V6 is enabled, avoid using the double-word exclusive instructions in the kernel's atomic implementations as these are not supported. Fall back to the generic spinlock code instead. Acked-by: Tony Lindgren Acked-by: Will Deacon Tested-by: Sourav Poddar Tested-by: Will Deacon Signed-off-by: Russell King --- arch/arm/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 7a5fe5d131d..27ec471fb5b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -7,7 +7,7 @@ config ARM select HAVE_MEMBLOCK select RTC_LIB select SYS_SUPPORTS_APM_EMULATION - select GENERIC_ATOMIC64 if (!CPU_32v6K || !AEABI) + select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI) select HAVE_OPROFILE if (HAVE_PERF_EVENTS) select HAVE_ARCH_KGDB select HAVE_KPROBES if (!XIP_KERNEL && !THUMB2_KERNEL) -- cgit v1.2.3-18-g5258 From 37bc618fe2689a7f8de8fac82e72b00ecea4d43d Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 17 Jan 2011 16:38:56 +0000 Subject: ARM: v6k: select TLS register code according to V6 variants If CONFIG_CPU_V6 is enabled, we may or may not have the TLS register. Use the conditional code which copes with this variability. Otherwise, if CONFIG_CPU_32v6K is set, we know we have the TLS register on all supported CPUs, so use it unconditionally. Acked-by: Nicolas Pitre Acked-by: Tony Lindgren Tested-by: Sourav Poddar Tested-by: Will Deacon Signed-off-by: Russell King --- arch/arm/include/asm/tls.h | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/tls.h b/arch/arm/include/asm/tls.h index e71d6ff8d10..60843eb0f61 100644 --- a/arch/arm/include/asm/tls.h +++ b/arch/arm/include/asm/tls.h @@ -28,15 +28,14 @@ #define tls_emu 1 #define has_tls_reg 1 #define set_tls set_tls_none -#elif __LINUX_ARM_ARCH__ >= 7 || \ - (__LINUX_ARM_ARCH__ == 6 && defined(CONFIG_CPU_32v6K)) -#define tls_emu 0 -#define has_tls_reg 1 -#define set_tls set_tls_v6k -#elif __LINUX_ARM_ARCH__ == 6 +#elif defined(CONFIG_CPU_V6) #define tls_emu 0 #define has_tls_reg (elf_hwcap & HWCAP_TLS) #define set_tls set_tls_v6 +#elif defined(CONFIG_CPU_32v6K) +#define tls_emu 0 +#define has_tls_reg 1 +#define set_tls set_tls_v6k #else #define tls_emu 0 #define has_tls_reg 0 -- cgit v1.2.3-18-g5258 From 8762df4d5c5462bea8ad0f76473f39e9ce9b8662 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 17 Jan 2011 15:53:56 +0000 Subject: ARM: v6k: use CPU domain feature if we include support for arch < ARMv6K Rather than turning off CPU domain switching when the build architecture includes ARMv6K, thereby causing problems for ARMv6-supporting kernels, turn it on when it's required to support a CPU architecture. Acked-by: Nicolas Pitre Acked-by: Tony Lindgren Tested-by: Sourav Poddar Tested-by: Will Deacon Signed-off-by: Russell King --- arch/arm/mm/Kconfig | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 22a3f4ad6ae..29215f5f11b 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -435,25 +435,30 @@ config CPU_32v3 bool select TLS_REG_EMUL if SMP || !MMU select NEEDS_SYSCALL_FOR_CMPXCHG if SMP + select CPU_USE_DOMAINS if MMU config CPU_32v4 bool select TLS_REG_EMUL if SMP || !MMU select NEEDS_SYSCALL_FOR_CMPXCHG if SMP + select CPU_USE_DOMAINS if MMU config CPU_32v4T bool select TLS_REG_EMUL if SMP || !MMU select NEEDS_SYSCALL_FOR_CMPXCHG if SMP + select CPU_USE_DOMAINS if MMU config CPU_32v5 bool select TLS_REG_EMUL if SMP || !MMU select NEEDS_SYSCALL_FOR_CMPXCHG if SMP + select CPU_USE_DOMAINS if MMU config CPU_32v6 bool select TLS_REG_EMUL if !CPU_32v6K && !MMU + select CPU_USE_DOMAINS if CPU_V6 && MMU config CPU_32v6K bool "Support ARM V6K processor extensions" if !SMP @@ -620,8 +625,6 @@ config CPU_CP15_MPU config CPU_USE_DOMAINS bool - depends on MMU - default y if !CPU_32v6K help This option enables or disables the use of domain switching via the set_fs() function. -- cgit v1.2.3-18-g5258 From 60799c6dd727b72b9c6794e9d1ab2d2b01a87ca4 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 15 Jan 2011 16:25:04 +0000 Subject: ARM: v6k: do not disable CPU_32v6K based on platform selection CPU_32v6K controls whether we use the ARMv6K extension instructions in the kernel, and in some places whether we use SMP-safe code sequences (eg, bitops.) MX3 prevents the selection of this option to ensure that it is not enabled for their CPU, which is ARMv6 only. Now that we've split the CPU_V6 option, V6K support won't be offered for MX3 anymore. OMAP prevents the selection of this option in an attempt to produce a kernel which runs on architectures from ARMv6 to ARMv7 MPCore. We now achieve this in a different way (see the previous patches). As such, we no longer need to offer this as a configuration option to the user. Tested-by: Tony Lindgren Tested-by: Sourav Poddar Tested-by: Will Deacon Signed-off-by: Russell King --- arch/arm/mm/Kconfig | 14 +++----------- 1 file changed, 3 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 29215f5f11b..ca1238baef7 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -405,7 +405,7 @@ config CPU_V6 config CPU_V6K bool "Support ARM V6K processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX select CPU_32v6 - select CPU_32v6K if !ARCH_OMAP2 + select CPU_32v6K select CPU_ABRT_EV6 select CPU_PABRT_V6 select CPU_CACHE_V6 @@ -418,7 +418,7 @@ config CPU_V6K # ARMv7 config CPU_V7 bool "Support ARM V7 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX - select CPU_32v6K if !ARCH_OMAP2 + select CPU_32v6K select CPU_32v7 select CPU_ABRT_EV7 select CPU_PABRT_V7 @@ -461,15 +461,7 @@ config CPU_32v6 select CPU_USE_DOMAINS if CPU_V6 && MMU config CPU_32v6K - bool "Support ARM V6K processor extensions" if !SMP - depends on CPU_V6 || CPU_V6K || CPU_V7 - default y if SMP && !(ARCH_MX3 || ARCH_OMAP2) - help - Say Y here if your ARMv6 processor supports the 'K' extension. - This enables the kernel to use some instructions not present - on previous processors, and as such a kernel build with this - enabled will not boot on processors with do not support these - instructions. + bool config CPU_32v7 bool -- cgit v1.2.3-18-g5258 From 581388c15bd61a2548af0b87152648741d038571 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 17 Jan 2011 17:27:48 +0000 Subject: ARM: v6k: allow swp emulation again when ARMv7 is enabled Now that we build a v6+v6k+v7 kernel with -march=armv6k for everything, we don't need to disable swp emulation to work around the build problem with OMAP. Tested-by: Tony Lindgren Tested-by: Sourav Poddar Tested-by: Will Deacon Signed-off-by: Russell King --- arch/arm/mm/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index ca1238baef7..843bc8c74b8 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -652,7 +652,7 @@ config ARM_THUMBEE config SWP_EMULATE bool "Emulate SWP/SWPB instructions" - depends on CPU_V7 && !CPU_V6 + depends on CPU_V7 select HAVE_PROC_CPU if PROC_FS default y if SMP help -- cgit v1.2.3-18-g5258 From fbb4ddacb6b70b3178fcb7e3debc5180e6b6cd2f Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 17 Jan 2011 18:01:58 +0000 Subject: ARM: v6k: only allow SMP if we have v6k or v7 CPU SMP extensions are only supported on ARMv6k or ARMv7 architectures, so only offer the option if we're building for such an architecture. Acked-by: Tony Lindgren Tested-by: Sourav Poddar Tested-by: Will Deacon Signed-off-by: Russell King --- arch/arm/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 27ec471fb5b..d3f5674bece 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1251,6 +1251,7 @@ source "kernel/time/Kconfig" config SMP bool "Symmetric Multi-Processing (EXPERIMENTAL)" depends on EXPERIMENTAL + depends on CPU_V6K || CPU_V7 depends on GENERIC_CLOCKEVENTS depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \ MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \ -- cgit v1.2.3-18-g5258 From 3bc28c8edc4f5f78d9ec23fb0f20df29b7b3a072 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 18 Jan 2011 13:30:33 +0000 Subject: ARM: v6k: DMA_CACHE_RWFO isn't appropriate for non-v6k CPUs Limit DMA_CACHE_RWFO to only v6k SMP CPUs - V6 CPUs aren't SMP capable, so the read/write for ownership work-around doesn't apply to them. Acked-by: Will Deacon Tested-by: Sourav Poddar Tested-by: Will Deacon Signed-off-by: Russell King --- arch/arm/mm/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 843bc8c74b8..808b8329b13 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -775,7 +775,7 @@ config NEEDS_SYSCALL_FOR_CMPXCHG config DMA_CACHE_RWFO bool "Enable read/write for ownership DMA cache maintenance" - depends on (CPU_V6 || CPU_V6K) && SMP + depends on CPU_V6K && SMP default y help The Snoop Control Unit on ARM11MPCore does not detect the -- cgit v1.2.3-18-g5258 From 774c096bf9e49eebf7b5d2d9fdddf632c29ccea0 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 23 Jan 2011 13:04:53 +0000 Subject: ARM: v6/v7 cache: allow cache calls to be optimized The v6 cache call optimization was disabled to allow the optional block cache operations to be subsituted on CPUs which supported those operations. However, as that functionality was removed, we no longer need to prevent this optimization being taken advantage of. The v7 cache call optimization was just a copy of the v6, so also fix that too. Tested-by: Will Deacon Signed-off-by: Russell King --- arch/arm/include/asm/cacheflush.h | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index 7d0614f599a..d9b4c42d62f 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -116,20 +116,20 @@ # define MULTI_CACHE 1 #endif -#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) -//# ifdef _CACHE +#if defined(CONFIG_CPU_CACHE_V6) +# ifdef _CACHE # define MULTI_CACHE 1 -//# else -//# define _CACHE v6 -//# endif +# else +# define _CACHE v6 +# endif #endif -#if defined(CONFIG_CPU_V7) -//# ifdef _CACHE +#if defined(CONFIG_CPU_CACHE_V7) +# ifdef _CACHE # define MULTI_CACHE 1 -//# else -//# define _CACHE v7 -//# endif +# else +# define _CACHE v7 +# endif #endif #if !defined(_CACHE) && !defined(MULTI_CACHE) -- cgit v1.2.3-18-g5258 From f12d3d04e8f6223276abb068c5d72852174b8c31 Mon Sep 17 00:00:00 2001 From: Matthieu CASTET Date: Thu, 20 Jan 2011 21:11:45 +0100 Subject: x86, nx: Don't force pages RW when setting NX bits Xen want page table pages read only. But the initial page table (from head_*.S) live in .data or .bss. That was broken by 64edc8ed5ffae999d8d413ba006850e9e34166cb. There is absolutely no reason to force these pages RW after they have already been marked RO. Signed-off-by: Matthieu CASTET Tested-by: Konrad Rzeszutek Wilk Signed-off-by: H. Peter Anvin --- arch/x86/mm/pageattr.c | 8 -------- 1 file changed, 8 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 8b830ca14ac..d343b3c81f3 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -256,7 +256,6 @@ static inline pgprot_t static_protections(pgprot_t prot, unsigned long address, unsigned long pfn) { pgprot_t forbidden = __pgprot(0); - pgprot_t required = __pgprot(0); /* * The BIOS area between 640k and 1Mb needs to be executable for @@ -282,12 +281,6 @@ static inline pgprot_t static_protections(pgprot_t prot, unsigned long address, if (within(pfn, __pa((unsigned long)__start_rodata) >> PAGE_SHIFT, __pa((unsigned long)__end_rodata) >> PAGE_SHIFT)) pgprot_val(forbidden) |= _PAGE_RW; - /* - * .data and .bss should always be writable. - */ - if (within(address, (unsigned long)_sdata, (unsigned long)_edata) || - within(address, (unsigned long)__bss_start, (unsigned long)__bss_stop)) - pgprot_val(required) |= _PAGE_RW; #if defined(CONFIG_X86_64) && defined(CONFIG_DEBUG_RODATA) /* @@ -327,7 +320,6 @@ static inline pgprot_t static_protections(pgprot_t prot, unsigned long address, #endif prot = __pgprot(pgprot_val(prot) & ~pgprot_val(forbidden)); - prot = __pgprot(pgprot_val(prot) | pgprot_val(required)); return prot; } -- cgit v1.2.3-18-g5258 From f7448548a9f32db38f243ccd4271617758ddfe2c Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Wed, 2 Feb 2011 17:02:55 -0800 Subject: x86, mtrr: Avoid MTRR reprogramming on BP during boot on UP platforms Markus Kohn ran into a hard hang regression on an acer aspire 1310, when acpi is enabled. git bisect showed the following commit as the bad one that introduced the boot regression. commit d0af9eed5aa91b6b7b5049cae69e5ea956fd85c3 Author: Suresh Siddha Date: Wed Aug 19 18:05:36 2009 -0700 x86, pat/mtrr: Rendezvous all the cpus for MTRR/PAT init Because of the UP configuration of that platform, native_smp_prepare_cpus() bailed out (in smp_sanity_check()) before doing the set_mtrr_aps_delayed_init() Further down the boot path, native_smp_cpus_done() will call the delayed MTRR initialization for the AP's (mtrr_aps_init()) with mtrr_aps_delayed_init not set. This resulted in the boot processor reprogramming its MTRR's to the values seen during the start of the OS boot. While this is not needed ideally, this shouldn't have caused any side-effects. This is because the reprogramming of MTRR's (set_mtrr_state() that gets called via set_mtrr()) will check if the live register contents are different from what is being asked to write and will do the actual write only if they are different. BP's mtrr state is read during the start of the OS boot and typically nothing would have changed when we ask to reprogram it on BP again because of the above scenario on an UP platform. So on a normal UP platform no reprogramming of BP MTRR MSR's happens and all is well. However, on this platform, bios seems to be modifying the fixed mtrr range registers between the start of OS boot and when we double check the live registers for reprogramming BP MTRR registers. And as the live registers are modified, we end up reprogramming the MTRR's to the state seen during the start of the OS boot. During ACPI initialization, something in the bios (probably smi handler?) don't like this fact and results in a hard lockup. We didn't see this boot hang issue on this platform before the commit d0af9eed5aa91b6b7b5049cae69e5ea956fd85c3, because only the AP's (if any) will program its MTRR's to the value that BP had at the start of the OS boot. Fix this issue by checking mtrr_aps_delayed_init before continuing further in the mtrr_aps_init(). Now, only AP's (if any) will program its MTRR's to the BP values during boot. Addresses https://bugzilla.novell.com/show_bug.cgi?id=623393 [ By the way, this behavior of the bios modifying MTRR's after the start of the OS boot is not common and the kernel is not prepared to handle this situation well. Irrespective of this issue, during suspend/resume, linux kernel will try to reprogram the BP's MTRR values to the values seen during the start of the OS boot. So suspend/resume might be already broken on this platform for all linux kernel versions. ] Reported-and-bisected-by: Markus Kohn Tested-by: Markus Kohn Signed-off-by: Suresh Siddha Cc: Thomas Renninger Cc: Rafael Wysocki Cc: Venkatesh Pallipadi Cc: stable@kernel.org # [v2.6.32+] LKML-Reference: <1296694975.4418.402.camel@sbsiddha-MOBL3.sc.intel.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/mtrr/main.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c index 01c0f3ee6cc..bebabec5b44 100644 --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -793,13 +793,21 @@ void set_mtrr_aps_delayed_init(void) } /* - * MTRR initialization for all AP's + * Delayed MTRR initialization for all AP's */ void mtrr_aps_init(void) { if (!use_intel()) return; + /* + * Check if someone has requested the delay of AP MTRR initialization, + * by doing set_mtrr_aps_delayed_init(), prior to this point. If not, + * then we are done. + */ + if (!mtrr_aps_delayed_init) + return; + set_mtrr(~0U, 0, 0, 0); mtrr_aps_delayed_init = false; } -- cgit v1.2.3-18-g5258 From 6ea038a7771be6652784fd06ad01f44028e3a43c Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Wed, 2 Feb 2011 13:50:29 +0100 Subject: ARM: mxs: adjust flexcan clock definition Signed-off-by: Marc Kleine-Budde Signed-off-by: Sascha Hauer --- arch/arm/mach-mxs/clock-mx28.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index 2f1a9904a4e..c9d7951e8bf 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -619,8 +619,8 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("pll2", NULL, pll2_clk) _REGISTER_CLOCK(NULL, "hclk", hbus_clk) _REGISTER_CLOCK(NULL, "xclk", xbus_clk) - _REGISTER_CLOCK(NULL, "can0", can0_clk) - _REGISTER_CLOCK(NULL, "can1", can1_clk) + _REGISTER_CLOCK("flexcan.0", NULL, can0_clk) + _REGISTER_CLOCK("flexcan.1", NULL, can1_clk) _REGISTER_CLOCK(NULL, "usb0", usb0_clk) _REGISTER_CLOCK(NULL, "usb1", usb1_clk) _REGISTER_CLOCK(NULL, "pwm", pwm_clk) -- cgit v1.2.3-18-g5258 From 22cbba1b82de458028f4aa270e88492b622c1ea8 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Wed, 2 Feb 2011 13:50:30 +0100 Subject: ARM: mxs: dynamically register flexcan devices for mx28 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Marc Kleine-Budde Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-mxs/devices-mx28.h | 6 +++ arch/arm/mach-mxs/devices/Kconfig | 4 ++ arch/arm/mach-mxs/devices/Makefile | 1 + arch/arm/mach-mxs/devices/platform-flexcan.c | 51 +++++++++++++++++++++++++ arch/arm/mach-mxs/include/mach/devices-common.h | 12 ++++++ 5 files changed, 74 insertions(+) create mode 100644 arch/arm/mach-mxs/devices/platform-flexcan.c (limited to 'arch') diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h index 1ab7bf0aa45..3b18304c565 100644 --- a/arch/arm/mach-mxs/devices-mx28.h +++ b/arch/arm/mach-mxs/devices-mx28.h @@ -26,3 +26,9 @@ extern const struct mxs_auart_data mx28_auart_data[] __initconst; extern const struct mxs_fec_data mx28_fec_data[] __initconst; #define mx28_add_fec(id, pdata) \ mxs_add_fec(&mx28_fec_data[id], pdata) + +extern const struct mxs_flexcan_data mx28_flexcan_data[] __initconst; +#define mx28_add_flexcan(id, pdata) \ + mxs_add_flexcan(&mx28_flexcan_data[id], pdata) +#define mx28_add_flexcan0(pdata) mx28_add_flexcan(0, pdata) +#define mx28_add_flexcan1(pdata) mx28_add_flexcan(1, pdata) diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig index 3001b754948..6c65b6716cf 100644 --- a/arch/arm/mach-mxs/devices/Kconfig +++ b/arch/arm/mach-mxs/devices/Kconfig @@ -7,3 +7,7 @@ config MXS_HAVE_PLATFORM_AUART config MXS_HAVE_PLATFORM_FEC bool + +config MXS_HAVE_PLATFORM_FLEXCAN + select HAVE_CAN_FLEXCAN if CAN + bool diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile index c814d054bad..a8dc8d5f6e1 100644 --- a/arch/arm/mach-mxs/devices/Makefile +++ b/arch/arm/mach-mxs/devices/Makefile @@ -1,3 +1,4 @@ obj-$(CONFIG_MXS_HAVE_AMBA_DUART) += amba-duart.o obj-$(CONFIG_MXS_HAVE_PLATFORM_AUART) += platform-auart.o obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o +obj-$(CONFIG_MXS_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o diff --git a/arch/arm/mach-mxs/devices/platform-flexcan.c b/arch/arm/mach-mxs/devices/platform-flexcan.c new file mode 100644 index 00000000000..43a6b4bae6f --- /dev/null +++ b/arch/arm/mach-mxs/devices/platform-flexcan.c @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2010, 2011 Pengutronix, + * Marc Kleine-Budde + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include +#include +#include + +#define mxs_flexcan_data_entry_single(soc, _id, _hwid, _size) \ + { \ + .id = _id, \ + .iobase = soc ## _CAN ## _hwid ## _BASE_ADDR, \ + .iosize = _size, \ + .irq = soc ## _INT_CAN ## _hwid, \ + } + +#define mxs_flexcan_data_entry(soc, _id, _hwid, _size) \ + [_id] = mxs_flexcan_data_entry_single(soc, _id, _hwid, _size) + +#ifdef CONFIG_SOC_IMX28 +const struct mxs_flexcan_data mx28_flexcan_data[] __initconst = { +#define mx28_flexcan_data_entry(_id, _hwid) \ + mxs_flexcan_data_entry_single(MX28, _id, _hwid, SZ_8K) + mx28_flexcan_data_entry(0, 0), + mx28_flexcan_data_entry(1, 1), +}; +#endif /* ifdef CONFIG_SOC_IMX28 */ + +struct platform_device *__init mxs_add_flexcan( + const struct mxs_flexcan_data *data, + const struct flexcan_platform_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + data->iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return mxs_add_platform_device("flexcan", data->id, + res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); +} diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h index bed40021e2c..e7aefb467ab 100644 --- a/arch/arm/mach-mxs/include/mach/devices-common.h +++ b/arch/arm/mach-mxs/include/mach/devices-common.h @@ -51,3 +51,15 @@ struct mxs_fec_data { struct platform_device *__init mxs_add_fec( const struct mxs_fec_data *data, const struct fec_platform_data *pdata); + +/* flexcan */ +#include +struct mxs_flexcan_data { + int id; + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irq; +}; +struct platform_device *__init mxs_add_flexcan( + const struct mxs_flexcan_data *data, + const struct flexcan_platform_data *pdata); -- cgit v1.2.3-18-g5258 From 831d52bc153971b70e64eccfbed2b232394f22f8 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Thu, 3 Feb 2011 12:20:04 -0800 Subject: x86, mm: avoid possible bogus tlb entries by clearing prev mm_cpumask after switching mm Clearing the cpu in prev's mm_cpumask early will avoid the flush tlb IPI's while the cr3 is still pointing to the prev mm. And this window can lead to the possibility of bogus TLB fills resulting in strange failures. One such problematic scenario is mentioned below. T1. CPU-1 is context switching from mm1 to mm2 context and got a NMI etc between the point of clearing the cpu from the mm_cpumask(mm1) and before reloading the cr3 with the new mm2. T2. CPU-2 is tearing down a specific vma for mm1 and will proceed with flushing the TLB for mm1. It doesn't send the flush TLB to CPU-1 as it doesn't see that cpu listed in the mm_cpumask(mm1). T3. After the TLB flush is complete, CPU-2 goes ahead and frees the page-table pages associated with the removed vma mapping. T4. CPU-2 now allocates those freed page-table pages for something else. T5. As the CR3 and TLB caches for mm1 is still active on CPU-1, CPU-1 can potentially speculate and walk through the page-table caches and can insert new TLB entries. As the page-table pages are already freed and being used on CPU-2, this page walk can potentially insert a bogus global TLB entry depending on the (random) contents of the page that is being used on CPU-2. T6. This bogus TLB entry being global will be active across future CR3 changes and can result in weird memory corruption etc. To avoid this issue, for the prev mm that is handing over the cpu to another mm, clear the cpu from the mm_cpumask(prev) after the cr3 is changed. Marking it for -stable, though we haven't seen any reported failure that can be attributed to this. Signed-off-by: Suresh Siddha Acked-by: Ingo Molnar Cc: stable@kernel.org [v2.6.32+] Signed-off-by: Linus Torvalds --- arch/x86/include/asm/mmu_context.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/mmu_context.h b/arch/x86/include/asm/mmu_context.h index 4a2d4e0c18d..8b5393ec108 100644 --- a/arch/x86/include/asm/mmu_context.h +++ b/arch/x86/include/asm/mmu_context.h @@ -36,8 +36,6 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, unsigned cpu = smp_processor_id(); if (likely(prev != next)) { - /* stop flush ipis for the previous mm */ - cpumask_clear_cpu(cpu, mm_cpumask(prev)); #ifdef CONFIG_SMP percpu_write(cpu_tlbstate.state, TLBSTATE_OK); percpu_write(cpu_tlbstate.active_mm, next); @@ -47,6 +45,9 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, /* Re-load page tables */ load_cr3(next->pgd); + /* stop flush ipis for the previous mm */ + cpumask_clear_cpu(cpu, mm_cpumask(prev)); + /* * load the LDT, if the LDT is different: */ -- cgit v1.2.3-18-g5258 From 0f66e50af53d39edebf4bc64ef90077e738c171f Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Tue, 11 Jan 2011 00:16:43 -0500 Subject: serial: bfin_5xx: split uart RX lock from uart port lock to avoid deadlock The RX lock is used to protect the RX buffer from concurrent access in DMA mode between the timer and RX interrupt routines. It is independent from the uart lock which is used to protect the TX buffer. It is possible for a uart TX transfer to be started up from the RX interrupt handler if low latency is enabled. So we need to split the locks to avoid deadlocking in this situation. In PIO mode, the RX lock is not necessary because the handle_simple_irq and handle_level_irq functions ensure driver interrupt handlers are called once on one core. And now that the RX path has its own lock, the TX interrupt has nothing to do with the RX path, so disabling it at the same time. Signed-off-by: Sonic Zhang Signed-off-by: Mike Frysinger Signed-off-by: Greg Kroah-Hartman --- arch/blackfin/include/asm/bfin_serial.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/blackfin/include/asm/bfin_serial.h b/arch/blackfin/include/asm/bfin_serial.h index 1ff9f1468c0..7dbc664eab1 100644 --- a/arch/blackfin/include/asm/bfin_serial.h +++ b/arch/blackfin/include/asm/bfin_serial.h @@ -10,6 +10,7 @@ #define __BFIN_ASM_SERIAL_H__ #include +#include #include #include @@ -41,6 +42,7 @@ struct bfin_serial_port { struct circ_buf rx_dma_buf; struct timer_list rx_dma_timer; int rx_dma_nrows; + spinlock_t rx_lock; unsigned int tx_dma_channel; unsigned int rx_dma_channel; struct work_struct tx_dma_workqueue; -- cgit v1.2.3-18-g5258 From c540ada2625caabd2dc4dc1e4740bc28765f1b4f Mon Sep 17 00:00:00 2001 From: Nathan Fontenot Date: Thu, 20 Jan 2011 10:45:20 -0600 Subject: memory hotplug: Define memory_block_size_bytes for powerpc/pseries Define a version of memory_block_size_bytes() for powerpc/pseries such that a memory block spans an entire lmb. Signed-off-by: Nathan Fontenot Reviewed-by: Robin Holt Signed-off-by: Greg Kroah-Hartman --- arch/powerpc/platforms/pseries/hotplug-memory.c | 66 ++++++++++++++++++++----- 1 file changed, 53 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c index bc880366414..33867ec4a23 100644 --- a/arch/powerpc/platforms/pseries/hotplug-memory.c +++ b/arch/powerpc/platforms/pseries/hotplug-memory.c @@ -17,6 +17,54 @@ #include #include +static unsigned long get_memblock_size(void) +{ + struct device_node *np; + unsigned int memblock_size = 0; + + np = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory"); + if (np) { + const unsigned long *size; + + size = of_get_property(np, "ibm,lmb-size", NULL); + memblock_size = size ? *size : 0; + + of_node_put(np); + } else { + unsigned int memzero_size = 0; + const unsigned int *regs; + + np = of_find_node_by_path("/memory@0"); + if (np) { + regs = of_get_property(np, "reg", NULL); + memzero_size = regs ? regs[3] : 0; + of_node_put(np); + } + + if (memzero_size) { + /* We now know the size of memory@0, use this to find + * the first memoryblock and get its size. + */ + char buf[64]; + + sprintf(buf, "/memory@%x", memzero_size); + np = of_find_node_by_path(buf); + if (np) { + regs = of_get_property(np, "reg", NULL); + memblock_size = regs ? regs[3] : 0; + of_node_put(np); + } + } + } + + return memblock_size; +} + +unsigned long memory_block_size_bytes(void) +{ + return get_memblock_size(); +} + static int pseries_remove_memblock(unsigned long base, unsigned int memblock_size) { unsigned long start, start_pfn; @@ -127,30 +175,22 @@ static int pseries_add_memory(struct device_node *np) static int pseries_drconf_memory(unsigned long *base, unsigned int action) { - struct device_node *np; - const unsigned long *lmb_size; + unsigned long memblock_size; int rc; - np = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory"); - if (!np) + memblock_size = get_memblock_size(); + if (!memblock_size) return -EINVAL; - lmb_size = of_get_property(np, "ibm,lmb-size", NULL); - if (!lmb_size) { - of_node_put(np); - return -EINVAL; - } - if (action == PSERIES_DRCONF_MEM_ADD) { - rc = memblock_add(*base, *lmb_size); + rc = memblock_add(*base, memblock_size); rc = (rc < 0) ? -EINVAL : 0; } else if (action == PSERIES_DRCONF_MEM_REMOVE) { - rc = pseries_remove_memblock(*base, *lmb_size); + rc = pseries_remove_memblock(*base, memblock_size); } else { rc = -EINVAL; } - of_node_put(np); return rc; } -- cgit v1.2.3-18-g5258 From 1dc41aa6d6172d61c10638d11933a3595a41d51a Mon Sep 17 00:00:00 2001 From: Nathan Fontenot Date: Thu, 20 Jan 2011 10:46:15 -0600 Subject: memory hotplug: Define memory_block_size_bytes for x86_64 with CONFIG_X86_UV Define a version of memory_block_size_bytes for x86_64 when CONFIG_X86_UV is set. Signed-off-by: Robin Holt Signed-off-by: Jack Steiner Signed-off-by: Nathan Fontenot Signed-off-by: Greg Kroah-Hartman --- arch/x86/mm/init_64.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'arch') diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 71a59296af8..17e90d1f8c4 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -51,6 +51,7 @@ #include #include #include +#include static int __init parse_direct_gbpages_off(char *arg) { @@ -908,6 +909,19 @@ const char *arch_vma_name(struct vm_area_struct *vma) return NULL; } +#ifdef CONFIG_X86_UV +#define MIN_MEMORY_BLOCK_SIZE (1 << SECTION_SIZE_BITS) + +unsigned long memory_block_size_bytes(void) +{ + if (is_uv_system()) { + printk(KERN_INFO "UV: memory block size 2GB\n"); + return 2UL * 1024 * 1024 * 1024; + } + return MIN_MEMORY_BLOCK_SIZE; +} +#endif + #ifdef CONFIG_SPARSEMEM_VMEMMAP /* * Initialise the sparsemem vmemmap using huge-pages at the PMD level. -- cgit v1.2.3-18-g5258 From b6338bdc8305b27688a7feb8689e4ccfd42f0292 Mon Sep 17 00:00:00 2001 From: Jean Pihet Date: Wed, 2 Feb 2011 16:38:06 +0100 Subject: ARM: 6649/1: omap: use fncpy to copy the PM code functions to SRAM The new fncpy API is better suited* for copying some code to SRAM at runtime. This patch changes the ad-hoc code to the more generic fncpy API. *: 1. fncpy ensures that the thumb mode bit is propagated, 2. fncpy provides the security of type safety between the original function and the sram function pointer. Tested OK on OMAP3 in low power modes (RET/OFF) using omap2plus_defconfig with !CONFIG_THUMB2_KERNEL. Compile tested on OMAP1/2 using omap1_defconfig. Boot tested on OMAP1 & OMAP2 Tested OK with suspend/resume on OMAP2420/n810 Boots fine on osk5912 and n800 Signed-off-by: Jean Pihet Acked-by: Kevin Hilman Acked-by: Tony Lindgren Reviewed-by: Dave Martin Tested-by: Kevin Hilman Tested-by: Tony Lindgren Signed-off-by: Russell King --- arch/arm/mach-omap1/pm.h | 6 +++--- arch/arm/mach-omap1/sleep.S | 3 +++ arch/arm/mach-omap1/sram.S | 1 + arch/arm/mach-omap2/pm.h | 2 +- arch/arm/mach-omap2/sleep24xx.S | 2 ++ arch/arm/mach-omap2/sleep34xx.S | 2 ++ arch/arm/mach-omap2/sram242x.S | 3 +++ arch/arm/mach-omap2/sram243x.S | 3 +++ arch/arm/mach-omap2/sram34xx.S | 1 + arch/arm/plat-omap/include/plat/sram.h | 14 +++++++++++++- arch/arm/plat-omap/sram.c | 14 +++++++++----- 11 files changed, 41 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/pm.h b/arch/arm/mach-omap1/pm.h index 56a647986ae..cd926dcb5e7 100644 --- a/arch/arm/mach-omap1/pm.h +++ b/arch/arm/mach-omap1/pm.h @@ -123,9 +123,9 @@ extern void allow_idle_sleep(void); extern void omap1_pm_idle(void); extern void omap1_pm_suspend(void); -extern void omap7xx_cpu_suspend(unsigned short, unsigned short); -extern void omap1510_cpu_suspend(unsigned short, unsigned short); -extern void omap1610_cpu_suspend(unsigned short, unsigned short); +extern void omap7xx_cpu_suspend(unsigned long, unsigned long); +extern void omap1510_cpu_suspend(unsigned long, unsigned long); +extern void omap1610_cpu_suspend(unsigned long, unsigned long); extern void omap7xx_idle_loop_suspend(void); extern void omap1510_idle_loop_suspend(void); extern void omap1610_idle_loop_suspend(void); diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S index ef771ce8b03..c875bdc902c 100644 --- a/arch/arm/mach-omap1/sleep.S +++ b/arch/arm/mach-omap1/sleep.S @@ -58,6 +58,7 @@ */ #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + .align 3 ENTRY(omap7xx_cpu_suspend) @ save registers on stack @@ -137,6 +138,7 @@ ENTRY(omap7xx_cpu_suspend_sz) #endif /* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */ #ifdef CONFIG_ARCH_OMAP15XX + .align 3 ENTRY(omap1510_cpu_suspend) @ save registers on stack @@ -211,6 +213,7 @@ ENTRY(omap1510_cpu_suspend_sz) #endif /* CONFIG_ARCH_OMAP15XX */ #if defined(CONFIG_ARCH_OMAP16XX) + .align 3 ENTRY(omap1610_cpu_suspend) @ save registers on stack diff --git a/arch/arm/mach-omap1/sram.S b/arch/arm/mach-omap1/sram.S index 7724e520d07..692587d07ea 100644 --- a/arch/arm/mach-omap1/sram.S +++ b/arch/arm/mach-omap1/sram.S @@ -18,6 +18,7 @@ /* * Reprograms ULPD and CKCTL. */ + .align 3 ENTRY(omap1_sram_reprogram_clock) stmfd sp!, {r0 - r12, lr} @ save registers on stack diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 1c1b0ab5b97..39580e6060e 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -92,7 +92,7 @@ extern void omap24xx_idle_loop_suspend(void); extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl, void __iomem *sdrc_power); extern void omap34xx_cpu_suspend(u32 *addr, int save_state); -extern void save_secure_ram_context(u32 *addr); +extern int save_secure_ram_context(u32 *addr); extern void omap3_save_scratchpad_contents(void); extern unsigned int omap24xx_idle_loop_suspend_sz; diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S index c7780cc8d91..b5071a47ec3 100644 --- a/arch/arm/mach-omap2/sleep24xx.S +++ b/arch/arm/mach-omap2/sleep24xx.S @@ -47,6 +47,7 @@ * Note: This code get's copied to internal SRAM at boot. When the OMAP * wakes up it continues execution at the point it went to sleep. */ + .align 3 ENTRY(omap24xx_idle_loop_suspend) stmfd sp!, {r0, lr} @ save registers on stack mov r0, #0 @ clear for mcr setup @@ -82,6 +83,7 @@ ENTRY(omap24xx_idle_loop_suspend_sz) * The DLL load value is not kept in RETENTION or OFF. It needs to be restored * at wake */ + .align 3 ENTRY(omap24xx_cpu_suspend) stmfd sp!, {r0 - r12, lr} @ save registers on stack mov r3, #0x0 @ clear for mcr call diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index 98d8232808b..951a0be66cf 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -118,6 +118,7 @@ ENTRY(enable_omap3630_toggle_l2_on_restore) .text /* Function to call rom code to save secure ram context */ + .align 3 ENTRY(save_secure_ram_context) stmfd sp!, {r1-r12, lr} @ save registers on stack adr r3, api_params @ r3 points to parameters @@ -169,6 +170,7 @@ ENTRY(save_secure_ram_context_sz) * depending on the low power mode (non-OFF vs OFF modes), * cf. 'Resume path for xxx mode' comments. */ + .align 3 ENTRY(omap34xx_cpu_suspend) stmfd sp!, {r0-r12, lr} @ save registers on stack diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S index 055310cc77d..ff9b9dbcb30 100644 --- a/arch/arm/mach-omap2/sram242x.S +++ b/arch/arm/mach-omap2/sram242x.S @@ -39,6 +39,7 @@ .text + .align 3 ENTRY(omap242x_sram_ddr_init) stmfd sp!, {r0 - r12, lr} @ save registers on stack @@ -143,6 +144,7 @@ ENTRY(omap242x_sram_ddr_init_sz) * r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR] * PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0 */ + .align 3 ENTRY(omap242x_sram_reprogram_sdrc) stmfd sp!, {r0 - r10, lr} @ save registers on stack mov r3, #0x0 @ clear for mrc call @@ -238,6 +240,7 @@ ENTRY(omap242x_sram_reprogram_sdrc_sz) /* * Set dividers and pll. Also recalculate DLL value for DDR and unlock mode. */ + .align 3 ENTRY(omap242x_sram_set_prcm) stmfd sp!, {r0-r12, lr} @ regs to stack adr r4, pbegin @ addr of preload start diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S index f9007580aea..76730209fa0 100644 --- a/arch/arm/mach-omap2/sram243x.S +++ b/arch/arm/mach-omap2/sram243x.S @@ -39,6 +39,7 @@ .text + .align 3 ENTRY(omap243x_sram_ddr_init) stmfd sp!, {r0 - r12, lr} @ save registers on stack @@ -143,6 +144,7 @@ ENTRY(omap243x_sram_ddr_init_sz) * r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR] * PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0 */ + .align 3 ENTRY(omap243x_sram_reprogram_sdrc) stmfd sp!, {r0 - r10, lr} @ save registers on stack mov r3, #0x0 @ clear for mrc call @@ -238,6 +240,7 @@ ENTRY(omap243x_sram_reprogram_sdrc_sz) /* * Set dividers and pll. Also recalculate DLL value for DDR and unlock mode. */ + .align 3 ENTRY(omap243x_sram_set_prcm) stmfd sp!, {r0-r12, lr} @ regs to stack adr r4, pbegin @ addr of preload start diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S index 7f893a29d50..25011ca2145 100644 --- a/arch/arm/mach-omap2/sram34xx.S +++ b/arch/arm/mach-omap2/sram34xx.S @@ -111,6 +111,7 @@ * since it will cause the ARM MMU to attempt to walk the page tables. * These crashes may be intermittent. */ + .align 3 ENTRY(omap3_sram_configure_core_dpll) stmfd sp!, {r1-r12, lr} @ store regs to stack diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h index 9967d5e855c..f500fc34d06 100644 --- a/arch/arm/plat-omap/include/plat/sram.h +++ b/arch/arm/plat-omap/include/plat/sram.h @@ -12,7 +12,19 @@ #define __ARCH_ARM_OMAP_SRAM_H #ifndef __ASSEMBLY__ -extern void * omap_sram_push(void * start, unsigned long size); +#include + +extern void *omap_sram_push_address(unsigned long size); + +/* Macro to push a function to the internal SRAM, using the fncpy API */ +#define omap_sram_push(funcp, size) ({ \ + typeof(&(funcp)) _res = NULL; \ + void *_sram_address = omap_sram_push_address(size); \ + if (_sram_address) \ + _res = fncpy(_sram_address, &(funcp), size); \ + _res; \ +}) + extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl); extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index e26e50487d6..68fcc7dc56e 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -242,7 +242,14 @@ static void __init omap_map_sram(void) omap_sram_size - SRAM_BOOTLOADER_SZ); } -void * omap_sram_push(void * start, unsigned long size) +/* + * Memory allocator for SRAM: calculates the new ceiling address + * for pushing a function using the fncpy API. + * + * Note that fncpy requires the returned address to be aligned + * to an 8-byte boundary. + */ +void *omap_sram_push_address(unsigned long size) { if (size > (omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ))) { printk(KERN_ERR "Not enough space in SRAM\n"); @@ -250,10 +257,7 @@ void * omap_sram_push(void * start, unsigned long size) } omap_sram_ceil -= size; - omap_sram_ceil = ROUND_DOWN(omap_sram_ceil, sizeof(void *)); - memcpy((void *)omap_sram_ceil, start, size); - flush_icache_range((unsigned long)omap_sram_ceil, - (unsigned long)(omap_sram_ceil + size)); + omap_sram_ceil = ROUND_DOWN(omap_sram_ceil, FNCPY_ALIGN); return (void *)omap_sram_ceil; } -- cgit v1.2.3-18-g5258 From 04bea68b2f0eeebb089ecc67b618795925268b4a Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Mon, 24 Jan 2011 09:58:55 +0530 Subject: of/pci: move of_irq_map_pci() into generic code There is a tiny difference between PPC32 and PPC64. Microblaze uses the PPC32 variant. Signed-off-by: Sebastian Andrzej Siewior [grant.likely@secretlab.ca: Added comment to #endif, moved documentation block to function implementation, fixed for non ppc and microblaze compiles] Signed-off-by: Grant Likely --- arch/microblaze/include/asm/pci-bridge.h | 12 +++++ arch/microblaze/include/asm/prom.h | 15 ------ arch/microblaze/kernel/prom_parse.c | 77 ----------------------------- arch/microblaze/pci/pci-common.c | 1 + arch/powerpc/include/asm/pci-bridge.h | 10 ++++ arch/powerpc/include/asm/prom.h | 15 ------ arch/powerpc/kernel/pci-common.c | 1 + arch/powerpc/kernel/prom_parse.c | 84 -------------------------------- 8 files changed, 24 insertions(+), 191 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/include/asm/pci-bridge.h b/arch/microblaze/include/asm/pci-bridge.h index 0c68764ab54..10717669e0c 100644 --- a/arch/microblaze/include/asm/pci-bridge.h +++ b/arch/microblaze/include/asm/pci-bridge.h @@ -104,11 +104,22 @@ struct pci_controller { int global_number; /* PCI domain number */ }; +#ifdef CONFIG_PCI static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus) { return bus->sysdata; } +static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus) +{ + struct pci_controller *host; + + if (bus->self) + return pci_device_to_OF_node(bus->self); + host = pci_bus_to_host(bus); + return host ? host->dn : NULL; +} + static inline int isa_vaddr_is_ioport(void __iomem *address) { /* No specific ISA handling on ppc32 at this stage, it @@ -116,6 +127,7 @@ static inline int isa_vaddr_is_ioport(void __iomem *address) */ return 0; } +#endif /* CONFIG_PCI */ /* These are used for config access before all the PCI probing has been done. */ diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h index 2e72af078b0..d0890d36ef6 100644 --- a/arch/microblaze/include/asm/prom.h +++ b/arch/microblaze/include/asm/prom.h @@ -64,21 +64,6 @@ extern void kdump_move_device_tree(void); /* CPU OF node matching */ struct device_node *of_get_cpu_node(int cpu, unsigned int *thread); -/** - * of_irq_map_pci - Resolve the interrupt for a PCI device - * @pdev: the device whose interrupt is to be resolved - * @out_irq: structure of_irq filled by this function - * - * This function resolves the PCI interrupt for a given PCI device. If a - * device-node exists for a given pci_dev, it will use normal OF tree - * walking. If not, it will implement standard swizzling and walk up the - * PCI tree until an device-node is found, at which point it will finish - * resolving using the OF tree walking. - */ -struct pci_dev; -struct of_irq; -extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq); - #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ diff --git a/arch/microblaze/kernel/prom_parse.c b/arch/microblaze/kernel/prom_parse.c index 9ae24f4b882..47187cc2cf0 100644 --- a/arch/microblaze/kernel/prom_parse.c +++ b/arch/microblaze/kernel/prom_parse.c @@ -2,88 +2,11 @@ #include #include -#include #include #include #include #include #include -#include - -#ifdef CONFIG_PCI -int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq) -{ - struct device_node *dn, *ppnode; - struct pci_dev *ppdev; - u32 lspec; - u32 laddr[3]; - u8 pin; - int rc; - - /* Check if we have a device node, if yes, fallback to standard OF - * parsing - */ - dn = pci_device_to_OF_node(pdev); - if (dn) - return of_irq_map_one(dn, 0, out_irq); - - /* Ok, we don't, time to have fun. Let's start by building up an - * interrupt spec. we assume #interrupt-cells is 1, which is standard - * for PCI. If you do different, then don't use that routine. - */ - rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin); - if (rc != 0) - return rc; - /* No pin, exit */ - if (pin == 0) - return -ENODEV; - - /* Now we walk up the PCI tree */ - lspec = pin; - for (;;) { - /* Get the pci_dev of our parent */ - ppdev = pdev->bus->self; - - /* Ouch, it's a host bridge... */ - if (ppdev == NULL) { - struct pci_controller *host; - host = pci_bus_to_host(pdev->bus); - ppnode = host ? host->dn : NULL; - /* No node for host bridge ? give up */ - if (ppnode == NULL) - return -EINVAL; - } else - /* We found a P2P bridge, check if it has a node */ - ppnode = pci_device_to_OF_node(ppdev); - - /* Ok, we have found a parent with a device-node, hand over to - * the OF parsing code. - * We build a unit address from the linux device to be used for - * resolution. Note that we use the linux bus number which may - * not match your firmware bus numbering. - * Fortunately, in most cases, interrupt-map-mask doesn't - * include the bus number as part of the matching. - * You should still be careful about that though if you intend - * to rely on this function (you ship a firmware that doesn't - * create device nodes for all PCI devices). - */ - if (ppnode) - break; - - /* We can only get here if we hit a P2P bridge with no node, - * let's do standard swizzling and try again - */ - lspec = pci_swizzle_interrupt_pin(pdev, lspec); - pdev = ppdev; - } - - laddr[0] = (pdev->bus->number << 16) - | (pdev->devfn << 8); - laddr[1] = laddr[2] = 0; - return of_irq_map_raw(ppnode, &lspec, 1, laddr, out_irq); -} -EXPORT_SYMBOL_GPL(of_irq_map_pci); -#endif /* CONFIG_PCI */ void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop, unsigned long *busno, unsigned long *phys, unsigned long *size) diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c index e363615d679..1e01a125363 100644 --- a/arch/microblaze/pci/pci-common.c +++ b/arch/microblaze/pci/pci-common.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h index 51e9e6f90d1..edeb80fdd2c 100644 --- a/arch/powerpc/include/asm/pci-bridge.h +++ b/arch/powerpc/include/asm/pci-bridge.h @@ -171,6 +171,16 @@ static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus) return bus->sysdata; } +static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus) +{ + struct pci_controller *host; + + if (bus->self) + return pci_device_to_OF_node(bus->self); + host = pci_bus_to_host(bus); + return host ? host->dn : NULL; +} + static inline int isa_vaddr_is_ioport(void __iomem *address) { /* No specific ISA handling on ppc32 at this stage, it diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h index d7275758559..c189aa5fe1f 100644 --- a/arch/powerpc/include/asm/prom.h +++ b/arch/powerpc/include/asm/prom.h @@ -70,21 +70,6 @@ static inline int of_node_to_nid(struct device_node *device) { return 0; } #endif #define of_node_to_nid of_node_to_nid -/** - * of_irq_map_pci - Resolve the interrupt for a PCI device - * @pdev: the device whose interrupt is to be resolved - * @out_irq: structure of_irq filled by this function - * - * This function resolves the PCI interrupt for a given PCI device. If a - * device-node exists for a given pci_dev, it will use normal OF tree - * walking. If not, it will implement standard swizzling and walk up the - * PCI tree until an device-node is found, at which point it will finish - * resolving using the OF tree walking. - */ -struct pci_dev; -struct of_irq; -extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq); - extern void of_instantiate_rtc(void); /* These includes are put at the bottom because they may contain things diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 10a44e68ef1..eb341be9a4d 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c index c2b7a07cc3d..47187cc2cf0 100644 --- a/arch/powerpc/kernel/prom_parse.c +++ b/arch/powerpc/kernel/prom_parse.c @@ -2,95 +2,11 @@ #include #include -#include #include #include #include #include #include -#include - -#ifdef CONFIG_PCI -int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq) -{ - struct device_node *dn, *ppnode; - struct pci_dev *ppdev; - u32 lspec; - u32 laddr[3]; - u8 pin; - int rc; - - /* Check if we have a device node, if yes, fallback to standard OF - * parsing - */ - dn = pci_device_to_OF_node(pdev); - if (dn) { - rc = of_irq_map_one(dn, 0, out_irq); - if (!rc) - return rc; - } - - /* Ok, we don't, time to have fun. Let's start by building up an - * interrupt spec. we assume #interrupt-cells is 1, which is standard - * for PCI. If you do different, then don't use that routine. - */ - rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin); - if (rc != 0) - return rc; - /* No pin, exit */ - if (pin == 0) - return -ENODEV; - - /* Now we walk up the PCI tree */ - lspec = pin; - for (;;) { - /* Get the pci_dev of our parent */ - ppdev = pdev->bus->self; - - /* Ouch, it's a host bridge... */ - if (ppdev == NULL) { -#ifdef CONFIG_PPC64 - ppnode = pci_bus_to_OF_node(pdev->bus); -#else - struct pci_controller *host; - host = pci_bus_to_host(pdev->bus); - ppnode = host ? host->dn : NULL; -#endif - /* No node for host bridge ? give up */ - if (ppnode == NULL) - return -EINVAL; - } else - /* We found a P2P bridge, check if it has a node */ - ppnode = pci_device_to_OF_node(ppdev); - - /* Ok, we have found a parent with a device-node, hand over to - * the OF parsing code. - * We build a unit address from the linux device to be used for - * resolution. Note that we use the linux bus number which may - * not match your firmware bus numbering. - * Fortunately, in most cases, interrupt-map-mask doesn't include - * the bus number as part of the matching. - * You should still be careful about that though if you intend - * to rely on this function (you ship a firmware that doesn't - * create device nodes for all PCI devices). - */ - if (ppnode) - break; - - /* We can only get here if we hit a P2P bridge with no node, - * let's do standard swizzling and try again - */ - lspec = pci_swizzle_interrupt_pin(pdev, lspec); - pdev = ppdev; - } - - laddr[0] = (pdev->bus->number << 16) - | (pdev->devfn << 8); - laddr[1] = laddr[2] = 0; - return of_irq_map_raw(ppnode, &lspec, 1, laddr, out_irq); -} -EXPORT_SYMBOL_GPL(of_irq_map_pci); -#endif /* CONFIG_PCI */ void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop, unsigned long *busno, unsigned long *phys, unsigned long *size) -- cgit v1.2.3-18-g5258 From b5d937de0367d26f65b9af1aef5f2c34c1939be0 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Fri, 4 Feb 2011 11:24:11 -0700 Subject: powerpc/pci: Make both ppc32 and ppc64 use sysdata for pci_controller Currently, ppc32 uses sysdata for the pci_controller pointer, and ppc64 uses it to hold the device_node pointer. This patch moves the of_node pointer into (struct pci_bus*)->dev.of_node and (struct pci_dev*)->dev.of_node so that sysdata can be converted to always use the pci_controller pointer instead. It also fixes up the allocating of pci devices so that the of_node pointer gets assigned consistently and increments the ref count. Signed-off-by: Grant Likely --- arch/microblaze/pci/pci_32.c | 1 + arch/powerpc/include/asm/pci-bridge.h | 27 +++++---------------------- arch/powerpc/include/asm/pci.h | 2 +- arch/powerpc/kernel/of_platform.c | 2 +- arch/powerpc/kernel/pci-common.c | 11 +++-------- arch/powerpc/kernel/pci_32.c | 2 +- arch/powerpc/kernel/pci_64.c | 6 +++--- arch/powerpc/kernel/pci_dn.c | 9 ++++++--- arch/powerpc/kernel/pci_of_scan.c | 4 ++-- arch/powerpc/platforms/pseries/pci_dlpar.c | 2 +- 10 files changed, 24 insertions(+), 42 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/pci/pci_32.c b/arch/microblaze/pci/pci_32.c index 3c3d808d7ce..92728a6cfd8 100644 --- a/arch/microblaze/pci/pci_32.c +++ b/arch/microblaze/pci/pci_32.c @@ -332,6 +332,7 @@ static void __devinit pcibios_scan_phb(struct pci_controller *hose) hose->global_number); return; } + bus.dev->of_node = of_node_get(node); bus->secondary = hose->first_busno; hose->bus = bus; diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h index edeb80fdd2c..5e156e034fe 100644 --- a/arch/powerpc/include/asm/pci-bridge.h +++ b/arch/powerpc/include/asm/pci-bridge.h @@ -164,13 +164,13 @@ extern void setup_indirect_pci(struct pci_controller* hose, resource_size_t cfg_addr, resource_size_t cfg_data, u32 flags); -#ifndef CONFIG_PPC64 - static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus) { return bus->sysdata; } +#ifndef CONFIG_PPC64 + static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus) { struct pci_controller *host; @@ -228,19 +228,10 @@ extern void * update_dn_pci_info(struct device_node *dn, void *data); /* Get a device_node from a pci_dev. This code must be fast except * in the case where the sysdata is incorrect and needs to be fixed - * up (this will only happen once). - * In this case the sysdata will have been inherited from a PCI host - * bridge or a PCI-PCI bridge further up the tree, so it will point - * to a valid struct pci_dn, just not the one we want. - */ + * up (this will only happen once). */ static inline struct device_node *pci_device_to_OF_node(struct pci_dev *dev) { - struct device_node *dn = dev->sysdata; - struct pci_dn *pdn = dn->data; - - if (pdn && pdn->devfn == dev->devfn && pdn->busno == dev->bus->number) - return dn; /* fast path. sysdata is good */ - return fetch_dev_dn(dev); + return dev->dev.of_node ? dev->dev.of_node : fetch_dev_dn(dev); } static inline int pci_device_from_OF_node(struct device_node *np, @@ -258,7 +249,7 @@ static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus) if (bus->self) return pci_device_to_OF_node(bus->self); else - return bus->sysdata; /* Must be root bus (PHB) */ + return bus->dev.of_node; /* Must be root bus (PHB) */ } /** Find the bus corresponding to the indicated device node */ @@ -270,14 +261,6 @@ extern void pcibios_remove_pci_devices(struct pci_bus *bus); /** Discover new pci devices under this bus, and add them */ extern void pcibios_add_pci_devices(struct pci_bus *bus); -static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus) -{ - struct device_node *busdn = bus->sysdata; - - BUG_ON(busdn == NULL); - return PCI_DN(busdn)->phb; -} - extern void isa_bridge_find_early(struct pci_controller *hose); diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h index a20a9ad2258..7d7790954e0 100644 --- a/arch/powerpc/include/asm/pci.h +++ b/arch/powerpc/include/asm/pci.h @@ -201,7 +201,7 @@ extern void pci_resource_to_user(const struct pci_dev *dev, int bar, extern void pcibios_setup_bus_devices(struct pci_bus *bus); extern void pcibios_setup_bus_self(struct pci_bus *bus); extern void pcibios_setup_phb_io_space(struct pci_controller *hose); -extern void pcibios_scan_phb(struct pci_controller *hose, void *sysdata); +extern void pcibios_scan_phb(struct pci_controller *hose); #endif /* __KERNEL__ */ #endif /* __ASM_POWERPC_PCI_H */ diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c index b2c363ef38a..9bd951c6776 100644 --- a/arch/powerpc/kernel/of_platform.c +++ b/arch/powerpc/kernel/of_platform.c @@ -74,7 +74,7 @@ static int __devinit of_pci_phb_probe(struct platform_device *dev, #endif /* CONFIG_EEH */ /* Scan the bus */ - pcibios_scan_phb(phb, dev->dev.of_node); + pcibios_scan_phb(phb); if (phb->bus == NULL) return -ENXIO; diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index eb341be9a4d..3cd85faa8ac 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -1688,13 +1688,8 @@ int early_find_capability(struct pci_controller *hose, int bus, int devfn, /** * pci_scan_phb - Given a pci_controller, setup and scan the PCI bus * @hose: Pointer to the PCI host controller instance structure - * @sysdata: value to use for sysdata pointer. ppc32 and ppc64 differ here - * - * Note: the 'data' pointer is a temporary measure. As 32 and 64 bit - * pci code gets merged, this parameter should become unnecessary because - * both will use the same value. */ -void __devinit pcibios_scan_phb(struct pci_controller *hose, void *sysdata) +void __devinit pcibios_scan_phb(struct pci_controller *hose) { struct pci_bus *bus; struct device_node *node = hose->dn; @@ -1704,13 +1699,13 @@ void __devinit pcibios_scan_phb(struct pci_controller *hose, void *sysdata) node ? node->full_name : ""); /* Create an empty bus for the toplevel */ - bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, - sysdata); + bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, hose); if (bus == NULL) { pr_err("Failed to create bus for PCI domain %04x\n", hose->global_number); return; } + bus->dev.of_node = of_node_get(node); bus->secondary = hose->first_busno; hose->bus = bus; diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c index e7db5b48004..bedb370459f 100644 --- a/arch/powerpc/kernel/pci_32.c +++ b/arch/powerpc/kernel/pci_32.c @@ -381,7 +381,7 @@ static int __init pcibios_init(void) if (pci_assign_all_buses) hose->first_busno = next_busno; hose->last_busno = 0xff; - pcibios_scan_phb(hose, hose); + pcibios_scan_phb(hose); pci_bus_add_devices(hose->bus); if (pci_assign_all_buses || next_busno <= hose->last_busno) next_busno = hose->last_busno + pcibios_assign_bus_offset; diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index 851577608a7..fc6452b6be9 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -64,7 +64,7 @@ static int __init pcibios_init(void) /* Scan all of the recorded PCI controllers. */ list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { - pcibios_scan_phb(hose, hose->dn); + pcibios_scan_phb(hose); pci_bus_add_devices(hose->bus); } @@ -242,10 +242,10 @@ long sys_pciconfig_iobase(long which, unsigned long in_bus, break; bus = NULL; } - if (bus == NULL || bus->sysdata == NULL) + if (bus == NULL || bus->dev.of_node == NULL) return -ENODEV; - hose_node = (struct device_node *)bus->sysdata; + hose_node = bus->dev.of_node; hose = PCI_DN(hose_node)->phb; switch (which) { diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c index d56b35ee7f7..29852688cea 100644 --- a/arch/powerpc/kernel/pci_dn.c +++ b/arch/powerpc/kernel/pci_dn.c @@ -161,7 +161,7 @@ static void *is_devfn_node(struct device_node *dn, void *data) /* * This is the "slow" path for looking up a device_node from a * pci_dev. It will hunt for the device under its parent's - * phb and then update sysdata for a future fastpath. + * phb and then update of_node pointer. * * It may also do fixups on the actual device since this happens * on the first read/write. @@ -170,16 +170,19 @@ static void *is_devfn_node(struct device_node *dn, void *data) * In this case it may probe for real hardware ("just in case") * and add a device_node to the device tree if necessary. * + * Is this function necessary anymore now that dev->dev.of_node is + * used to store the node pointer? + * */ struct device_node *fetch_dev_dn(struct pci_dev *dev) { - struct device_node *orig_dn = dev->sysdata; + struct device_node *orig_dn = dev->dev.of_node; struct device_node *dn; unsigned long searchval = (dev->bus->number << 8) | dev->devfn; dn = traverse_pci_devices(orig_dn, is_devfn_node, (void *)searchval); if (dn) - dev->sysdata = dn; + dev->dev.of_node = dn; return dn; } EXPORT_SYMBOL(fetch_dev_dn); diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c index e751506323b..1e89a72fd03 100644 --- a/arch/powerpc/kernel/pci_of_scan.c +++ b/arch/powerpc/kernel/pci_of_scan.c @@ -135,7 +135,7 @@ struct pci_dev *of_create_pci_dev(struct device_node *node, pr_debug(" create device, devfn: %x, type: %s\n", devfn, type); dev->bus = bus; - dev->sysdata = node; + dev->dev.of_node = of_node_get(node); dev->dev.parent = bus->bridge; dev->dev.bus = &pci_bus_type; dev->devfn = devfn; @@ -238,7 +238,7 @@ void __devinit of_scan_pci_bridge(struct device_node *node, bus->primary = dev->bus->number; bus->subordinate = busrange[1]; bus->bridge_ctl = 0; - bus->sysdata = node; + bus->dev.of_node = of_node_get(node); /* parse ranges property */ /* PCI #address-cells == 3 and #size-cells == 2 always */ diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c index 5fcc92a12d3..3bf4488aaec 100644 --- a/arch/powerpc/platforms/pseries/pci_dlpar.c +++ b/arch/powerpc/platforms/pseries/pci_dlpar.c @@ -149,7 +149,7 @@ struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn) if (dn->child) eeh_add_device_tree_early(dn); - pcibios_scan_phb(phb, dn); + pcibios_scan_phb(phb); pcibios_finish_adding_to_bus(phb->bus); return phb; -- cgit v1.2.3-18-g5258 From 9b12771ad243541ad28e651f40cc9c7905ee32c3 Mon Sep 17 00:00:00 2001 From: Vasiliy Kulikov Date: Fri, 4 Feb 2011 12:23:13 +0000 Subject: mach-omap2: mux: world-writable debugfs files Do not create mux debugfs files as world-writable. Signed-off-by: Vasiliy Kulikov Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/mux.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 98148b6c36e..6c84659cf84 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -605,7 +605,7 @@ static void __init omap_mux_dbg_create_entry( list_for_each_entry(e, &partition->muxmodes, node) { struct omap_mux *m = &e->mux; - (void)debugfs_create_file(m->muxnames[0], S_IWUGO, mux_dbg_dir, + (void)debugfs_create_file(m->muxnames[0], S_IWUSR, mux_dbg_dir, m, &omap_mux_dbg_signal_fops); } } -- cgit v1.2.3-18-g5258 From f9fbe47cc1487ba1a5f543a315f8a59bc77c1a68 Mon Sep 17 00:00:00 2001 From: Vasiliy Kulikov Date: Fri, 4 Feb 2011 12:23:16 +0000 Subject: mach-omap2: pm: world-writable debugfs timer files Don't allow all users to change timer settings. Signed-off-by: Vasiliy Kulikov Acked-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/pm-debug.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 125f56591fb..a5a83b358dd 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -637,14 +637,14 @@ static int __init pm_dbg_init(void) } - (void) debugfs_create_file("enable_off_mode", S_IRUGO | S_IWUGO, d, + (void) debugfs_create_file("enable_off_mode", S_IRUGO | S_IWUSR, d, &enable_off_mode, &pm_dbg_option_fops); - (void) debugfs_create_file("sleep_while_idle", S_IRUGO | S_IWUGO, d, + (void) debugfs_create_file("sleep_while_idle", S_IRUGO | S_IWUSR, d, &sleep_while_idle, &pm_dbg_option_fops); - (void) debugfs_create_file("wakeup_timer_seconds", S_IRUGO | S_IWUGO, d, + (void) debugfs_create_file("wakeup_timer_seconds", S_IRUGO | S_IWUSR, d, &wakeup_timer_seconds, &pm_dbg_option_fops); (void) debugfs_create_file("wakeup_timer_milliseconds", - S_IRUGO | S_IWUGO, d, &wakeup_timer_milliseconds, + S_IRUGO | S_IWUSR, d, &wakeup_timer_milliseconds, &pm_dbg_option_fops); pm_dbg_init_done = 1; -- cgit v1.2.3-18-g5258 From 11d4c3f9b671720e80353dd7e433ff2bf65e9500 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Fri, 4 Feb 2011 16:14:11 -0800 Subject: x86-32: Make sure the stack is set up before we use it Since checkin ebba638ae723d8a8fc2f7abce5ec18b688b791d7 we call verify_cpu even in 32-bit mode. Unfortunately, calling a function means using the stack, and the stack pointer was not initialized in the 32-bit setup code! This code initializes the stack pointer, and simplifies the interface slightly since it is easier to rely on just a pointer value rather than a descriptor; we need to have different values for the segment register anyway. This retains start_stack as a virtual address, even though a physical address would be more convenient for 32 bits; the 64-bit code wants the other way around... Reported-by: Matthieu Castet LKML-Reference: <4D41E86D.8060205@free.fr> Tested-by: Kees Cook Signed-off-by: H. Peter Anvin --- arch/x86/include/asm/smp.h | 5 +---- arch/x86/kernel/acpi/sleep.c | 2 +- arch/x86/kernel/head_32.S | 30 +++++++++++++----------------- arch/x86/kernel/smpboot.c | 4 ++-- 4 files changed, 17 insertions(+), 24 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h index 4c2f63c7fc1..1f469513677 100644 --- a/arch/x86/include/asm/smp.h +++ b/arch/x86/include/asm/smp.h @@ -40,10 +40,7 @@ DECLARE_EARLY_PER_CPU(u16, x86_cpu_to_apicid); DECLARE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid); /* Static state in head.S used to set up a CPU */ -extern struct { - void *sp; - unsigned short ss; -} stack_start; +extern unsigned long stack_start; /* Initial stack pointer address */ struct smp_ops { void (*smp_prepare_boot_cpu)(void); diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index 69fd72aa559..4d9ebbab223 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -100,7 +100,7 @@ int acpi_save_state_mem(void) #else /* CONFIG_64BIT */ header->trampoline_segment = setup_trampoline() >> 4; #ifdef CONFIG_SMP - stack_start.sp = temp_stack + sizeof(temp_stack); + stack_start = (unsigned long)temp_stack + sizeof(temp_stack); early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(smp_processor_id()); initial_gs = per_cpu_offset(smp_processor_id()); diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index fc293dc8dc3..767d6c43de3 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -85,6 +85,8 @@ RESERVE_BRK(pagetables, INIT_MAP_SIZE) */ __HEAD ENTRY(startup_32) + movl pa(stack_start),%ecx + /* test KEEP_SEGMENTS flag to see if the bootloader is asking us to not reload segments */ testb $(1<<6), BP_loadflags(%esi) @@ -99,7 +101,9 @@ ENTRY(startup_32) movl %eax,%es movl %eax,%fs movl %eax,%gs + movl %eax,%ss 2: + leal -__PAGE_OFFSET(%ecx),%esp /* * Clear BSS first so that there are no surprises... @@ -145,8 +149,6 @@ ENTRY(startup_32) * _brk_end is set up to point to the first "safe" location. * Mappings are created both at virtual address 0 (identity mapping) * and PAGE_OFFSET for up to _end. - * - * Note that the stack is not yet set up! */ #ifdef CONFIG_X86_PAE @@ -282,6 +284,9 @@ ENTRY(startup_32_smp) movl %eax,%es movl %eax,%fs movl %eax,%gs + movl pa(stack_start),%ecx + movl %eax,%ss + leal -__PAGE_OFFSET(%ecx),%esp #endif /* CONFIG_SMP */ default_entry: @@ -347,8 +352,8 @@ default_entry: movl %eax,%cr0 /* ..and set paging (PG) bit */ ljmp $__BOOT_CS,$1f /* Clear prefetch and normalize %eip */ 1: - /* Set up the stack pointer */ - lss stack_start,%esp + /* Shift the stack pointer to a virtual address */ + addl $__PAGE_OFFSET, %esp /* * Initialize eflags. Some BIOS's leave bits like NT set. This would @@ -360,9 +365,7 @@ default_entry: #ifdef CONFIG_SMP cmpb $0, ready - jz 1f /* Initial CPU cleans BSS */ - jmp checkCPUtype -1: + jnz checkCPUtype #endif /* CONFIG_SMP */ /* @@ -470,14 +473,7 @@ is386: movl $2,%ecx # set MP cld # gcc2 wants the direction flag cleared at all times pushl $0 # fake return address for unwinder -#ifdef CONFIG_SMP - movb ready, %cl movb $1, ready - cmpb $0,%cl # the first CPU calls start_kernel - je 1f - movl (stack_start), %esp -1: -#endif /* CONFIG_SMP */ jmp *(initial_code) /* @@ -670,15 +666,15 @@ ENTRY(initial_page_table) #endif .data +.balign 4 ENTRY(stack_start) .long init_thread_union+THREAD_SIZE - .long __BOOT_DS - -ready: .byte 0 early_recursion_flag: .long 0 +ready: .byte 0 + int_msg: .asciz "Unknown interrupt or fault at: %p %p %p\n" diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 0cbe8c0b35e..03273b6c272 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -638,7 +638,7 @@ wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip) * target processor state. */ startup_ipi_hook(phys_apicid, (unsigned long) start_secondary, - (unsigned long)stack_start.sp); + stack_start); /* * Run STARTUP IPI loop. @@ -785,7 +785,7 @@ do_rest: #endif early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu); initial_code = (unsigned long)start_secondary; - stack_start.sp = (void *) c_idle.idle->thread.sp; + stack_start = c_idle.idle->thread.sp; /* start_ip had better be page-aligned! */ start_ip = setup_trampoline(); -- cgit v1.2.3-18-g5258 From 130551928195bdef3369e13572b9a383400681bb Mon Sep 17 00:00:00 2001 From: Hartley Sweeten Date: Thu, 27 Jan 2011 17:50:53 +0100 Subject: ARM: 6643/1: ep93xx: add framebuffer support to edb93xx boards The ep9307, ep9312, and ep9315 variants of the ep93xx processor include the raster engine needed for framebuffer support. This allows the EDB93xx boards with those processors to use the framebuffer driver. Tested on an EDB9307A with the following kernel parameters: video=640x480-16@60 video=1024x768-16@60 Signed-off-by: H Hartley Sweeten Acked-by: Ryan Mallon Signed-off-by: Russell King --- arch/arm/mach-ep93xx/edb93xx.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index 4b043165213..fad371df40e 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -32,6 +32,7 @@ #include #include +#include #include #include @@ -111,6 +112,37 @@ static void __init edb93xx_register_pwm(void) } +/************************************************************************* + * EDB93xx framebuffer + *************************************************************************/ +static struct ep93xxfb_mach_info __initdata edb93xxfb_info = { + .num_modes = EP93XXFB_USE_MODEDB, + .bpp = 16, + .flags = 0, +}; + +static int __init edb93xx_has_fb(void) +{ + /* These platforms have an ep93xx with video capability */ + return machine_is_edb9307() || machine_is_edb9307a() || + machine_is_edb9312() || machine_is_edb9315() || + machine_is_edb9315a(); +} + +static void __init edb93xx_register_fb(void) +{ + if (!edb93xx_has_fb()) + return; + + if (machine_is_edb9307a() || machine_is_edb9315a()) + edb93xxfb_info.flags |= EP93XXFB_USE_SDCSN0; + else + edb93xxfb_info.flags |= EP93XXFB_USE_SDCSN3; + + ep93xx_register_fb(&edb93xxfb_info); +} + + static void __init edb93xx_init_machine(void) { ep93xx_init_devices(); @@ -118,6 +150,7 @@ static void __init edb93xx_init_machine(void) ep93xx_register_eth(&edb93xx_eth_data, 1); edb93xx_register_i2c(); edb93xx_register_pwm(); + edb93xx_register_fb(); } -- cgit v1.2.3-18-g5258 From ec11594fbd5a3d2a47a7a7eda6d076363b78957c Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Sat, 5 Feb 2011 09:52:33 +0100 Subject: ARM: 6652/1: ep93xx: correct the end address of the AC97 memory resource The last register is at offset 0xa8 making the resource end to be 0xac - 1 instead of 0xb0 - 1. Signed-off-by: Mika Westerberg Acked-by: H Hartley Sweeten Signed-off-by: Russell King --- arch/arm/mach-ep93xx/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index ffdf87be295..82079545adc 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -838,7 +838,7 @@ EXPORT_SYMBOL(ep93xx_i2s_release); static struct resource ep93xx_ac97_resources[] = { { .start = EP93XX_AAC_PHYS_BASE, - .end = EP93XX_AAC_PHYS_BASE + 0xb0 - 1, + .end = EP93XX_AAC_PHYS_BASE + 0xac - 1, .flags = IORESOURCE_MEM, }, { -- cgit v1.2.3-18-g5258 From a9fe8d5fd52ecd17c3f3970bbcf6b3573f831898 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 5 Feb 2011 21:39:28 +0100 Subject: m32r: Fixup last __do_IRQ leftover Somehow I managed to miss the last __do_IRQ caller when I cleanup the remaining users. m32r is fully converted to the generic irq layer, but I managed to not commit the conversion of __do_IRQ() to generic_handle_irq() after compile testing the quilt series :( Pointed-out-by: Christoph Hellwig Signed-off-by: Thomas Gleixner Cc: Hirokazu Takata Cc: Paul Mundt --- arch/m32r/kernel/irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/m32r/kernel/irq.c b/arch/m32r/kernel/irq.c index f745c1287f3..76eaf3883fb 100644 --- a/arch/m32r/kernel/irq.c +++ b/arch/m32r/kernel/irq.c @@ -80,7 +80,7 @@ asmlinkage unsigned int do_IRQ(int irq, struct pt_regs *regs) #ifdef CONFIG_DEBUG_STACKOVERFLOW /* FIXME M32R */ #endif - __do_IRQ(irq); + generic_handle_irq(irq); irq_exit(); set_irq_regs(old_regs); -- cgit v1.2.3-18-g5258 From 3c3a3b4c12bdda8dd098fcdd4499a298548d6f31 Mon Sep 17 00:00:00 2001 From: Krzysztof Hałasa Date: Mon, 3 May 2010 23:22:06 +0200 Subject: IXP4xx: Fix qmgr_release_queue() flushing unexpected queue entries. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Queues should be empty when released, if not, there is a safety valve. Make sure the queue is usable after it triggers. Signed-off-by: Krzysztof Hałasa --- arch/arm/mach-ixp4xx/ixp4xx_qmgr.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c index bfdbe4b5a3c..852f7c9f87d 100644 --- a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c +++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c @@ -265,6 +265,11 @@ void qmgr_release_queue(unsigned int queue) qmgr_queue_descs[queue], queue); qmgr_queue_descs[queue][0] = '\x0'; #endif + + while ((addr = qmgr_get_entry(queue))) + printk(KERN_ERR "qmgr: released queue %i not empty: 0x%08X\n", + queue, addr); + __raw_writel(0, &qmgr_regs->sram[queue]); used_sram_bitmap[0] &= ~mask[0]; @@ -275,10 +280,6 @@ void qmgr_release_queue(unsigned int queue) spin_unlock_irq(&qmgr_lock); module_put(THIS_MODULE); - - while ((addr = qmgr_get_entry(queue))) - printk(KERN_ERR "qmgr: released queue %i not empty: 0x%08X\n", - queue, addr); } static int qmgr_init(void) -- cgit v1.2.3-18-g5258 From e66a022a80d73b1a5d2e02c9db2c42e8b9853b40 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sat, 11 Dec 2010 20:17:54 +0000 Subject: arm/ixp4xx: Rename FREQ macro to avoid collisions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit FREQ is a ridiculously short name for a platform-specific macro in a generic header, and it now conflicts with an enumeration in the gspca/ov519 driver. Also delete conditional reference to ixp4xx_get_board_tick_rate() which is not defined anywhere. Signed-off-by: Ben Hutchings Signed-off-by: Krzysztof Hałasa --- arch/arm/mach-ixp4xx/common.c | 4 ++-- arch/arm/mach-ixp4xx/include/mach/timex.h | 5 +++-- 2 files changed, 5 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 4dc68d6bb6b..9fd894271d5 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -432,7 +432,7 @@ static struct clocksource clocksource_ixp4xx = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -unsigned long ixp4xx_timer_freq = FREQ; +unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ; EXPORT_SYMBOL(ixp4xx_timer_freq); static void __init ixp4xx_clocksource_init(void) { @@ -496,7 +496,7 @@ static struct clock_event_device clockevent_ixp4xx = { static void __init ixp4xx_clockevent_init(void) { - clockevent_ixp4xx.mult = div_sc(FREQ, NSEC_PER_SEC, + clockevent_ixp4xx.mult = div_sc(IXP4XX_TIMER_FREQ, NSEC_PER_SEC, clockevent_ixp4xx.shift); clockevent_ixp4xx.max_delta_ns = clockevent_delta2ns(0xfffffffe, &clockevent_ixp4xx); diff --git a/arch/arm/mach-ixp4xx/include/mach/timex.h b/arch/arm/mach-ixp4xx/include/mach/timex.h index 2c3f93c3eb7..c9e930f2933 100644 --- a/arch/arm/mach-ixp4xx/include/mach/timex.h +++ b/arch/arm/mach-ixp4xx/include/mach/timex.h @@ -10,6 +10,7 @@ * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the * timer register ignores the bottom 2 bits of the LATCH value. */ -#define FREQ 66666000 -#define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ) +#define IXP4XX_TIMER_FREQ 66666000 +#define CLOCK_TICK_RATE \ + (((IXP4XX_TIMER_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ) -- cgit v1.2.3-18-g5258 From 81c386cc7f4c22b81ba94709d2d58754282ea05e Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Thu, 27 Jan 2011 10:31:38 +0000 Subject: powerpc: Fix pfn_valid() when memory starts at a non-zero address max_mapnr is a pfn, not an index innto mem_map[]. So don't add ARCH_PFN_OFFSET a second time. Signed-off-by: Scott Wood Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/page.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h index 53b64be40eb..da4b2000854 100644 --- a/arch/powerpc/include/asm/page.h +++ b/arch/powerpc/include/asm/page.h @@ -101,7 +101,7 @@ extern phys_addr_t kernstart_addr; #ifdef CONFIG_FLATMEM #define ARCH_PFN_OFFSET (MEMORY_START >> PAGE_SHIFT) -#define pfn_valid(pfn) ((pfn) >= ARCH_PFN_OFFSET && (pfn) < (ARCH_PFN_OFFSET + max_mapnr)) +#define pfn_valid(pfn) ((pfn) >= ARCH_PFN_OFFSET && (pfn) < max_mapnr) #endif #define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) -- cgit v1.2.3-18-g5258 From b51cbd41a3f05fb374420dac003deb401a7cd137 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Thu, 27 Jan 2011 10:30:00 +0000 Subject: powerpc/book3e: Protect complex macro args in mmu-book3e.h Signed-off-by: Scott Wood Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/mmu-book3e.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h index 8eaed81ea64..17194fcd404 100644 --- a/arch/powerpc/include/asm/mmu-book3e.h +++ b/arch/powerpc/include/asm/mmu-book3e.h @@ -40,8 +40,8 @@ /* MAS registers bit definitions */ -#define MAS0_TLBSEL(x) ((x << 28) & 0x30000000) -#define MAS0_ESEL(x) ((x << 16) & 0x0FFF0000) +#define MAS0_TLBSEL(x) (((x) << 28) & 0x30000000) +#define MAS0_ESEL(x) (((x) << 16) & 0x0FFF0000) #define MAS0_NV(x) ((x) & 0x00000FFF) #define MAS0_HES 0x00004000 #define MAS0_WQ_ALLWAYS 0x00000000 @@ -50,12 +50,12 @@ #define MAS1_VALID 0x80000000 #define MAS1_IPROT 0x40000000 -#define MAS1_TID(x) ((x << 16) & 0x3FFF0000) +#define MAS1_TID(x) (((x) << 16) & 0x3FFF0000) #define MAS1_IND 0x00002000 #define MAS1_TS 0x00001000 #define MAS1_TSIZE_MASK 0x00000f80 #define MAS1_TSIZE_SHIFT 7 -#define MAS1_TSIZE(x) ((x << MAS1_TSIZE_SHIFT) & MAS1_TSIZE_MASK) +#define MAS1_TSIZE(x) (((x) << MAS1_TSIZE_SHIFT) & MAS1_TSIZE_MASK) #define MAS2_EPN 0xFFFFF000 #define MAS2_X0 0x00000040 -- cgit v1.2.3-18-g5258 From af9eef3c7b1ed004c378c89b87642f4937337d50 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 20 Jan 2011 20:36:03 +0000 Subject: powerpc: Pass the right cpu_spec to ->setup_cpu() on 64-bit When calling setup_cpu() on 64-bit, we pass a pointer to the cputable entry we have found. This used to be fine when cur_cpu_spec was a pointer to that entry, but nowadays, we copy the entry into a separate variable, and we do so before we call the setup_cpu() callback. That means that any attempt by that callback at patching the CPU table entry (to adjust CPU features for example) will patch the wrong table. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/cputable.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 8d74a24c550..e8e915ce3d8 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -2076,8 +2076,8 @@ static void __init setup_cpu_spec(unsigned long offset, struct cpu_spec *s) * pointer on ppc64 and booke as we are running at 0 in real mode * on ppc64 and reloc_offset is always 0 on booke. */ - if (s->cpu_setup) { - s->cpu_setup(offset, s); + if (t->cpu_setup) { + t->cpu_setup(offset, t); } #endif /* CONFIG_PPC64 || CONFIG_BOOKE */ } -- cgit v1.2.3-18-g5258 From 1f1936ff3febf38d582177ea319eaa278f32c91f Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 20 Jan 2011 20:35:23 +0000 Subject: powerpc: Fix some 6xx/7xxx CPU setup functions Some of those functions try to adjust the CPU features, for example to remove NAP support on some revisions. However, they seem to use r5 as an index into the CPU table entry, which might have been right a long time ago but no longer is. r4 is the right register to use. This probably caused some off behaviours on some PowerMac variants using 750cx or 7455 processor revisions. Signed-off-by: Benjamin Herrenschmidt CC: stable@kernel.org --- arch/powerpc/kernel/cpu_setup_6xx.S | 40 ++++++++++++++++++------------------- 1 file changed, 20 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/cpu_setup_6xx.S b/arch/powerpc/kernel/cpu_setup_6xx.S index 55cba4a8a95..f8cd9fba4d3 100644 --- a/arch/powerpc/kernel/cpu_setup_6xx.S +++ b/arch/powerpc/kernel/cpu_setup_6xx.S @@ -18,7 +18,7 @@ #include _GLOBAL(__setup_cpu_603) - mflr r4 + mflr r5 BEGIN_MMU_FTR_SECTION li r10,0 mtspr SPRN_SPRG_603_LRU,r10 /* init SW LRU tracking */ @@ -27,60 +27,60 @@ BEGIN_FTR_SECTION bl __init_fpu_registers END_FTR_SECTION_IFCLR(CPU_FTR_FPU_UNAVAILABLE) bl setup_common_caches - mtlr r4 + mtlr r5 blr _GLOBAL(__setup_cpu_604) - mflr r4 + mflr r5 bl setup_common_caches bl setup_604_hid0 - mtlr r4 + mtlr r5 blr _GLOBAL(__setup_cpu_750) - mflr r4 + mflr r5 bl __init_fpu_registers bl setup_common_caches bl setup_750_7400_hid0 - mtlr r4 + mtlr r5 blr _GLOBAL(__setup_cpu_750cx) - mflr r4 + mflr r5 bl __init_fpu_registers bl setup_common_caches bl setup_750_7400_hid0 bl setup_750cx - mtlr r4 + mtlr r5 blr _GLOBAL(__setup_cpu_750fx) - mflr r4 + mflr r5 bl __init_fpu_registers bl setup_common_caches bl setup_750_7400_hid0 bl setup_750fx - mtlr r4 + mtlr r5 blr _GLOBAL(__setup_cpu_7400) - mflr r4 + mflr r5 bl __init_fpu_registers bl setup_7400_workarounds bl setup_common_caches bl setup_750_7400_hid0 - mtlr r4 + mtlr r5 blr _GLOBAL(__setup_cpu_7410) - mflr r4 + mflr r5 bl __init_fpu_registers bl setup_7410_workarounds bl setup_common_caches bl setup_750_7400_hid0 li r3,0 mtspr SPRN_L2CR2,r3 - mtlr r4 + mtlr r5 blr _GLOBAL(__setup_cpu_745x) - mflr r4 + mflr r5 bl setup_common_caches bl setup_745x_specifics - mtlr r4 + mtlr r5 blr /* Enable caches for 603's, 604, 750 & 7400 */ @@ -194,10 +194,10 @@ setup_750cx: cror 4*cr0+eq,4*cr0+eq,4*cr1+eq cror 4*cr0+eq,4*cr0+eq,4*cr2+eq bnelr - lwz r6,CPU_SPEC_FEATURES(r5) + lwz r6,CPU_SPEC_FEATURES(r4) li r7,CPU_FTR_CAN_NAP andc r6,r6,r7 - stw r6,CPU_SPEC_FEATURES(r5) + stw r6,CPU_SPEC_FEATURES(r4) blr /* 750fx specific @@ -225,12 +225,12 @@ BEGIN_FTR_SECTION andis. r11,r11,L3CR_L3E@h beq 1f END_FTR_SECTION_IFSET(CPU_FTR_L3CR) - lwz r6,CPU_SPEC_FEATURES(r5) + lwz r6,CPU_SPEC_FEATURES(r4) andi. r0,r6,CPU_FTR_L3_DISABLE_NAP beq 1f li r7,CPU_FTR_CAN_NAP andc r6,r6,r7 - stw r6,CPU_SPEC_FEATURES(r5) + stw r6,CPU_SPEC_FEATURES(r4) 1: mfspr r11,SPRN_HID0 -- cgit v1.2.3-18-g5258 From bd03403ad5d789f75974985b698cffcd23ef9346 Mon Sep 17 00:00:00 2001 From: Jesse Larrew Date: Thu, 20 Jan 2011 19:00:51 +0000 Subject: powerpc/pseries: Fix typo in VPHN comments Correct a spelling error in VPHN comments in numa.c. Signed-off-by: Jesse Larrew Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/numa.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index bf5cb91f07d..4d7f9e78023 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -1289,7 +1289,7 @@ u64 memory_hotplug_max(void) } #endif /* CONFIG_MEMORY_HOTPLUG */ -/* Vrtual Processor Home Node (VPHN) support */ +/* Virtual Processor Home Node (VPHN) support */ #ifdef CONFIG_PPC_SPLPAR #define VPHN_NR_CHANGE_CTRS (8) static u8 vphn_cpu_change_counts[NR_CPUS][VPHN_NR_CHANGE_CTRS]; -- cgit v1.2.3-18-g5258 From 7639adaafbfe988d814d45181389fac7697d844e Mon Sep 17 00:00:00 2001 From: Jesse Larrew Date: Thu, 20 Jan 2011 19:01:13 +0000 Subject: powerpc/pseries: Fix brace placement in numa.c Fix brace placement in VPHN code. Signed-off-by: Jesse Larrew Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/numa.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 4d7f9e78023..6c0cd06d0d5 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -1310,9 +1310,8 @@ static void setup_cpu_associativity_change_counters(void) u8 *counts = vphn_cpu_change_counts[cpu]; volatile u8 *hypervisor_counts = lppaca[cpu].vphn_assoc_counts; - for (i = 0; i < VPHN_NR_CHANGE_CTRS; i++) { + for (i = 0; i < VPHN_NR_CHANGE_CTRS; i++) counts[i] = hypervisor_counts[i]; - } } } @@ -1379,14 +1378,12 @@ static int vphn_unpack_associativity(const long *packed, unsigned int *unpacked) */ unpacked[i] = *((u32*)field); field += 2; - } - else if (*field & VPHN_FIELD_MSB) { + } else if (*field & VPHN_FIELD_MSB) { /* Data is in the lower 15 bits of this field */ unpacked[i] = *field & VPHN_FIELD_MASK; field++; nr_assoc_doms++; - } - else { + } else { /* Data is in the lower 15 bits of this field * concatenated with the next 16 bit field */ -- cgit v1.2.3-18-g5258 From cd9d6cc7266ca7f3ad9bacb3262a0fda38f13c6f Mon Sep 17 00:00:00 2001 From: Jesse Larrew Date: Thu, 20 Jan 2011 19:01:35 +0000 Subject: powerpc/pseries: Remove unnecessary variable initializations in numa.c Remove unnecessary variable initializations in VPHN functions. Signed-off-by: Jesse Larrew Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/numa.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 6c0cd06d0d5..9e36cafe307 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -1303,10 +1303,10 @@ static void set_topology_timer(void); */ static void setup_cpu_associativity_change_counters(void) { - int cpu = 0; + int cpu; for_each_possible_cpu(cpu) { - int i = 0; + int i; u8 *counts = vphn_cpu_change_counts[cpu]; volatile u8 *hypervisor_counts = lppaca[cpu].vphn_assoc_counts; @@ -1328,7 +1328,7 @@ static void setup_cpu_associativity_change_counters(void) */ static int update_cpu_associativity_changes_mask(void) { - int cpu = 0, nr_cpus = 0; + int cpu, nr_cpus = 0; cpumask_t *changes = &cpu_associativity_changes_mask; cpumask_clear(changes); @@ -1362,8 +1362,7 @@ static int update_cpu_associativity_changes_mask(void) */ static int vphn_unpack_associativity(const long *packed, unsigned int *unpacked) { - int i = 0; - int nr_assoc_doms = 0; + int i, nr_assoc_doms = 0; const u16 *field = (const u16*) packed; #define VPHN_FIELD_UNUSED (0xffff) @@ -1402,7 +1401,7 @@ static int vphn_unpack_associativity(const long *packed, unsigned int *unpacked) */ static long hcall_vphn(unsigned long cpu, unsigned int *associativity) { - long rc = 0; + long rc; long retbuf[PLPAR_HCALL9_BUFSIZE] = {0}; u64 flags = 1; int hwcpu = get_hard_smp_processor_id(cpu); @@ -1416,7 +1415,7 @@ static long hcall_vphn(unsigned long cpu, unsigned int *associativity) static long vphn_get_associativity(unsigned long cpu, unsigned int *associativity) { - long rc = 0; + long rc; rc = hcall_vphn(cpu, associativity); @@ -1442,9 +1441,9 @@ static long vphn_get_associativity(unsigned long cpu, */ int arch_update_cpu_topology(void) { - int cpu = 0, nid = 0, old_nid = 0; + int cpu, nid, old_nid; unsigned int associativity[VPHN_ASSOC_BUFSIZE] = {0}; - struct sys_device *sysdev = NULL; + struct sys_device *sysdev; for_each_cpu_mask(cpu, cpu_associativity_changes_mask) { vphn_get_associativity(cpu, associativity); -- cgit v1.2.3-18-g5258 From 5de1669910a59025e6cf24baef242a6c264d5752 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Sat, 29 Jan 2011 12:24:34 +0000 Subject: powerpc/numa: Only use active VPHN count fields VPHN supports up to 8 distance fields but the number of entries in ibm,associativity-reference-points signifies how many are in use. Don't look at all the VPHN counts, only distance_ref_points_depth worth. Since we already cap our distance metrics at MAX_DISTANCE_REF_POINTS, use that to size the VPHN arrays and add a BUILD_BUG_ON to avoid it growing larger than the VPHN maximum of 8. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/numa.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 9e36cafe307..f25633d3d00 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -1291,8 +1291,7 @@ u64 memory_hotplug_max(void) /* Virtual Processor Home Node (VPHN) support */ #ifdef CONFIG_PPC_SPLPAR -#define VPHN_NR_CHANGE_CTRS (8) -static u8 vphn_cpu_change_counts[NR_CPUS][VPHN_NR_CHANGE_CTRS]; +static u8 vphn_cpu_change_counts[NR_CPUS][MAX_DISTANCE_REF_POINTS]; static cpumask_t cpu_associativity_changes_mask; static int vphn_enabled; static void set_topology_timer(void); @@ -1305,12 +1304,15 @@ static void setup_cpu_associativity_change_counters(void) { int cpu; + /* The VPHN feature supports a maximum of 8 reference points */ + BUILD_BUG_ON(MAX_DISTANCE_REF_POINTS > 8); + for_each_possible_cpu(cpu) { int i; u8 *counts = vphn_cpu_change_counts[cpu]; volatile u8 *hypervisor_counts = lppaca[cpu].vphn_assoc_counts; - for (i = 0; i < VPHN_NR_CHANGE_CTRS; i++) + for (i = 0; i < distance_ref_points_depth; i++) counts[i] = hypervisor_counts[i]; } } @@ -1338,7 +1340,7 @@ static int update_cpu_associativity_changes_mask(void) u8 *counts = vphn_cpu_change_counts[cpu]; volatile u8 *hypervisor_counts = lppaca[cpu].vphn_assoc_counts; - for (i = 0; i < VPHN_NR_CHANGE_CTRS; i++) { + for (i = 0; i < distance_ref_points_depth; i++) { if (hypervisor_counts[i] > counts[i]) { counts[i] = hypervisor_counts[i]; changed = 1; -- cgit v1.2.3-18-g5258 From d69043e8069f493ebee9472bcc78b3f54c5c27d9 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Sat, 29 Jan 2011 12:26:19 +0000 Subject: powerpc/numa: Check for all VPHN changes The hypervisor uses unsigned 1 byte counters to signal topology changes to the OS. Since they can wrap we need to check for any difference, not just if the hypervisor count is greater than the previous count. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/numa.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index f25633d3d00..b2937efdfd7 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -1341,7 +1341,7 @@ static int update_cpu_associativity_changes_mask(void) volatile u8 *hypervisor_counts = lppaca[cpu].vphn_assoc_counts; for (i = 0; i < distance_ref_points_depth; i++) { - if (hypervisor_counts[i] > counts[i]) { + if (hypervisor_counts[i] != counts[i]) { counts[i] = hypervisor_counts[i]; changed = 1; } -- cgit v1.2.3-18-g5258 From c0e5e46f3911a451b6915feda709fd1b9b7f026a Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Sat, 29 Jan 2011 12:28:04 +0000 Subject: powerpc/numa: Add length when creating OF properties via VPHN The rest of the NUMA code expects an OF associativity property with the first cell containing the length. Without this fix all topology changes cause us to misparse the property and put the cpu into node 0. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/numa.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index b2937efdfd7..d07cd08747e 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -1355,8 +1355,11 @@ static int update_cpu_associativity_changes_mask(void) return nr_cpus; } -/* 6 64-bit registers unpacked into 12 32-bit associativity values */ -#define VPHN_ASSOC_BUFSIZE (6*sizeof(u64)/sizeof(u32)) +/* + * 6 64-bit registers unpacked into 12 32-bit associativity values. To form + * the complete property we have to add the length in the first cell. + */ +#define VPHN_ASSOC_BUFSIZE (6*sizeof(u64)/sizeof(u32) + 1) /* * Convert the associativity domain numbers returned from the hypervisor @@ -1371,7 +1374,7 @@ static int vphn_unpack_associativity(const long *packed, unsigned int *unpacked) #define VPHN_FIELD_MSB (0x8000) #define VPHN_FIELD_MASK (~VPHN_FIELD_MSB) - for (i = 0; i < VPHN_ASSOC_BUFSIZE; i++) { + for (i = 1; i < VPHN_ASSOC_BUFSIZE; i++) { if (*field == VPHN_FIELD_UNUSED) { /* All significant fields processed, and remaining * fields contain the reserved value of all 1's. @@ -1394,6 +1397,9 @@ static int vphn_unpack_associativity(const long *packed, unsigned int *unpacked) } } + /* The first cell contains the length of the property */ + unpacked[0] = nr_assoc_doms; + return nr_assoc_doms; } -- cgit v1.2.3-18-g5258 From fe5cfd63557b39007460d17c585b8dc5ed6ace93 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Sat, 29 Jan 2011 12:35:22 +0000 Subject: powerpc/numa: Disable VPHN on dedicated processor partitions There is no need to start up the timer and monitor topology changes on a dedicated processor partition, so disable it. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/numa.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index d07cd08747e..3cf33494a5a 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -1516,7 +1516,8 @@ int start_topology_update(void) { int rc = 0; - if (firmware_has_feature(FW_FEATURE_VPHN)) { + if (firmware_has_feature(FW_FEATURE_VPHN) && + get_lppaca()->shared_proc) { vphn_enabled = 1; setup_cpu_associativity_change_counters(); init_timer_deferrable(&topology_timer); -- cgit v1.2.3-18-g5258 From 429f4d8d20b91e4a6c239f951c06a56a6ac22957 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Sat, 29 Jan 2011 12:37:16 +0000 Subject: powerpc/numa: Fix bug in unmap_cpu_from_node When converting to the new cpumask code I screwed up: - if (cpu_isset(cpu, numa_cpumask_lookup_table[node])) { - cpu_clear(cpu, numa_cpumask_lookup_table[node]); + if (cpumask_test_cpu(cpu, node_to_cpumask_map[node])) { + cpumask_set_cpu(cpu, node_to_cpumask_map[node]); This was introduced in commit 25863de07af9 (powerpc/cpumask: Convert NUMA code to new cpumask API) Fix it. Signed-off-by: Anton Blanchard Cc: Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/numa.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 3cf33494a5a..fd481232957 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -186,7 +186,7 @@ static void unmap_cpu_from_node(unsigned long cpu) dbg("removing cpu %lu from node %d\n", cpu, node); if (cpumask_test_cpu(cpu, node_to_cpumask_map[node])) { - cpumask_set_cpu(cpu, node_to_cpumask_map[node]); + cpumask_clear_cpu(cpu, node_to_cpumask_map[node]); } else { printk(KERN_ERR "WARNING: cpu %lu not found in node %d\n", cpu, node); -- cgit v1.2.3-18-g5258 From 57cdfdf829a850a317425ed93c6a576c9ee6329c Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 21 Oct 2010 00:52:12 +0000 Subject: powerpc: Fix hcall tracepoint recursion Spinlocks on shared processor partitions use H_YIELD to notify the hypervisor we are waiting on another virtual CPU. Unfortunately this means the hcall tracepoints can recurse. The patch below adds a percpu depth and checks it on both the entry and exit hcall tracepoints. Signed-off-by: Anton Blanchard Acked-by: Steven Rostedt Signed-off-by: Benjamin Herrenschmidt CC: stable@kernel.org --- arch/powerpc/platforms/pseries/lpar.c | 37 +++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index 5d3ea9f60dd..ca5d5898d32 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -713,6 +713,13 @@ EXPORT_SYMBOL(arch_free_page); /* NB: reg/unreg are called while guarded with the tracepoints_mutex */ extern long hcall_tracepoint_refcount; +/* + * Since the tracing code might execute hcalls we need to guard against + * recursion. One example of this are spinlocks calling H_YIELD on + * shared processor partitions. + */ +static DEFINE_PER_CPU(unsigned int, hcall_trace_depth); + void hcall_tracepoint_regfunc(void) { hcall_tracepoint_refcount++; @@ -725,12 +732,42 @@ void hcall_tracepoint_unregfunc(void) void __trace_hcall_entry(unsigned long opcode, unsigned long *args) { + unsigned long flags; + unsigned int *depth; + + local_irq_save(flags); + + depth = &__get_cpu_var(hcall_trace_depth); + + if (*depth) + goto out; + + (*depth)++; trace_hcall_entry(opcode, args); + (*depth)--; + +out: + local_irq_restore(flags); } void __trace_hcall_exit(long opcode, unsigned long retval, unsigned long *retbuf) { + unsigned long flags; + unsigned int *depth; + + local_irq_save(flags); + + depth = &__get_cpu_var(hcall_trace_depth); + + if (*depth) + goto out; + + (*depth)++; trace_hcall_exit(opcode, retval, retbuf); + (*depth)--; + +out: + local_irq_restore(flags); } #endif -- cgit v1.2.3-18-g5258 From d344e38b2c151ca5e5e39f562017127e93912528 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Sun, 6 Feb 2011 21:16:09 -0800 Subject: x86, nx: Mark the ACPI resume trampoline code as +x We reserve lowmem for the things that need it, like the ACPI wakeup code, way early to guarantee availability. This happens before we set up the proper pagetables, so set_memory_x() has no effect. Until we have a better solution, use an initcall to mark the wakeup code executable. Originally-by: Matthieu Castet Signed-off-by: H. Peter Anvin Cc: Matthias Hopf Cc: rjw@sisk.pl Cc: Suresh Siddha LKML-Reference: <4D4F8019.2090104@zytor.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/acpi/sleep.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index 4d9ebbab223..68d1537b8c8 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -12,10 +12,8 @@ #include #include #include - -#ifdef CONFIG_X86_32 #include -#endif +#include #include "realmode/wakeup.h" #include "sleep.h" @@ -149,6 +147,15 @@ void __init acpi_reserve_wakeup_memory(void) memblock_x86_reserve_range(mem, mem + WAKEUP_SIZE, "ACPI WAKEUP"); } +int __init acpi_configure_wakeup_memory(void) +{ + if (acpi_realmode) + set_memory_x(acpi_realmode, WAKEUP_SIZE >> PAGE_SHIFT); + + return 0; +} +arch_initcall(acpi_configure_wakeup_memory); + static int __init acpi_sleep_setup(char *str) { -- cgit v1.2.3-18-g5258 From 4a683a2c5e7cabe91218db28e56dc25e1b134ce3 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 7 Feb 2011 08:59:29 +0000 Subject: ARM: Update mach-types Signed-off-by: Russell King --- arch/arm/tools/mach-types | 105 ++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 101 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 2fea897ebeb..9d6feaabbe7 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Sun Dec 12 23:24:27 2010 +# Last update: Mon Feb 7 08:59:27 2011 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -2240,7 +2240,7 @@ arm_ultimator2 MACH_ARM_ULTIMATOR2 ARM_ULTIMATOR2 2250 vs_v210 MACH_VS_V210 VS_V210 2252 vs_v212 MACH_VS_V212 VS_V212 2253 hmt MACH_HMT HMT 2254 -suen3 MACH_SUEN3 SUEN3 2255 +km_kirkwood MACH_KM_KIRKWOOD KM_KIRKWOOD 2255 vesper MACH_VESPER VESPER 2256 str9 MACH_STR9 STR9 2257 omap3_wl_ff MACH_OMAP3_WL_FF OMAP3_WL_FF 2258 @@ -2987,7 +2987,7 @@ pxwnas_500_1000 MACH_PXWNAS_500_1000 PXWNAS_500_1000 3001 ea20 MACH_EA20 EA20 3002 awm2 MACH_AWM2 AWM2 3003 ti8148evm MACH_TI8148EVM TI8148EVM 3004 -tegra_seaboard MACH_TEGRA_SEABOARD TEGRA_SEABOARD 3005 +seaboard MACH_SEABOARD SEABOARD 3005 linkstation_chlv2 MACH_LINKSTATION_CHLV2 LINKSTATION_CHLV2 3006 tera_pro2_rack MACH_TERA_PRO2_RACK TERA_PRO2_RACK 3007 rubys MACH_RUBYS RUBYS 3008 @@ -3190,7 +3190,7 @@ synergy MACH_SYNERGY SYNERGY 3205 ics_if_voip MACH_ICS_IF_VOIP ICS_IF_VOIP 3206 wlf_cragg_6410 MACH_WLF_CRAGG_6410 WLF_CRAGG_6410 3207 punica MACH_PUNICA PUNICA 3208 -sbc_nt250 MACH_SBC_NT250 SBC_NT250 3209 +trimslice MACH_TRIMSLICE TRIMSLICE 3209 mx27_wmultra MACH_MX27_WMULTRA MX27_WMULTRA 3210 mackerel MACH_MACKEREL MACKEREL 3211 fa9x27 MACH_FA9X27 FA9X27 3213 @@ -3219,3 +3219,100 @@ pivicc MACH_PIVICC PIVICC 3235 pcm048 MACH_PCM048 PCM048 3236 dds MACH_DDS DDS 3237 chalten_xa1 MACH_CHALTEN_XA1 CHALTEN_XA1 3238 +ts48xx MACH_TS48XX TS48XX 3239 +tonga2_tfttimer MACH_TONGA2_TFTTIMER TONGA2_TFTTIMER 3240 +whistler MACH_WHISTLER WHISTLER 3241 +asl_phoenix MACH_ASL_PHOENIX ASL_PHOENIX 3242 +at91sam9263otlite MACH_AT91SAM9263OTLITE AT91SAM9263OTLITE 3243 +ddplug MACH_DDPLUG DDPLUG 3244 +d2plug MACH_D2PLUG D2PLUG 3245 +kzm9d MACH_KZM9D KZM9D 3246 +verdi_lte MACH_VERDI_LTE VERDI_LTE 3247 +nanozoom MACH_NANOZOOM NANOZOOM 3248 +dm3730_som_lv MACH_DM3730_SOM_LV DM3730_SOM_LV 3249 +dm3730_torpedo MACH_DM3730_TORPEDO DM3730_TORPEDO 3250 +anchovy MACH_ANCHOVY ANCHOVY 3251 +re2rev20 MACH_RE2REV20 RE2REV20 3253 +re2rev21 MACH_RE2REV21 RE2REV21 3254 +cns21xx MACH_CNS21XX CNS21XX 3255 +rider MACH_RIDER RIDER 3257 +nsk330 MACH_NSK330 NSK330 3258 +cns2133evb MACH_CNS2133EVB CNS2133EVB 3259 +z3_816x_mod MACH_Z3_816X_MOD Z3_816X_MOD 3260 +z3_814x_mod MACH_Z3_814X_MOD Z3_814X_MOD 3261 +beect MACH_BEECT BEECT 3262 +dma_thunderbug MACH_DMA_THUNDERBUG DMA_THUNDERBUG 3263 +omn_at91sam9g20 MACH_OMN_AT91SAM9G20 OMN_AT91SAM9G20 3264 +mx25_e2s_uc MACH_MX25_E2S_UC MX25_E2S_UC 3265 +mione MACH_MIONE MIONE 3266 +top9000_tcu MACH_TOP9000_TCU TOP9000_TCU 3267 +top9000_bsl MACH_TOP9000_BSL TOP9000_BSL 3268 +kingdom MACH_KINGDOM KINGDOM 3269 +armadillo460 MACH_ARMADILLO460 ARMADILLO460 3270 +lq2 MACH_LQ2 LQ2 3271 +sweda_tms2 MACH_SWEDA_TMS2 SWEDA_TMS2 3272 +mx53_loco MACH_MX53_LOCO MX53_LOCO 3273 +acer_a8 MACH_ACER_A8 ACER_A8 3275 +acer_gauguin MACH_ACER_GAUGUIN ACER_GAUGUIN 3276 +guppy MACH_GUPPY GUPPY 3277 +mx61_ard MACH_MX61_ARD MX61_ARD 3278 +tx53 MACH_TX53 TX53 3279 +omapl138_case_a3 MACH_OMAPL138_CASE_A3 OMAPL138_CASE_A3 3280 +uemd MACH_UEMD UEMD 3281 +ccwmx51mut MACH_CCWMX51MUT CCWMX51MUT 3282 +rockhopper MACH_ROCKHOPPER ROCKHOPPER 3283 +nookcolor MACH_NOOKCOLOR NOOKCOLOR 3284 +hkdkc100 MACH_HKDKC100 HKDKC100 3285 +ts42xx MACH_TS42XX TS42XX 3286 +aebl MACH_AEBL AEBL 3287 +wario MACH_WARIO WARIO 3288 +gfs_spm MACH_GFS_SPM GFS_SPM 3289 +cm_t3730 MACH_CM_T3730 CM_T3730 3290 +isc3 MACH_ISC3 ISC3 3291 +rascal MACH_RASCAL RASCAL 3292 +hrefv60 MACH_HREFV60 HREFV60 3293 +tpt_2_0 MACH_TPT_2_0 TPT_2_0 3294 +pyramid_td MACH_PYRAMID_TD PYRAMID_TD 3295 +splendor MACH_SPLENDOR SPLENDOR 3296 +guf_planet MACH_GUF_PLANET GUF_PLANET 3297 +msm8x60_qt MACH_MSM8X60_QT MSM8X60_QT 3298 +htc_hd_mini MACH_HTC_HD_MINI HTC_HD_MINI 3299 +athene MACH_ATHENE ATHENE 3300 +deep_r_ek_1 MACH_DEEP_R_EK_1 DEEP_R_EK_1 3301 +vivow_ct MACH_VIVOW_CT VIVOW_CT 3302 +nery_1000 MACH_NERY_1000 NERY_1000 3303 +rfl109145_ssrv MACH_RFL109145_SSRV RFL109145_SSRV 3304 +nmh MACH_NMH NMH 3305 +wn802t MACH_WN802T WN802T 3306 +dragonet MACH_DRAGONET DRAGONET 3307 +geneva_b MACH_GENEVA_B GENEVA_B 3308 +at91sam9263desk16l MACH_AT91SAM9263DESK16L AT91SAM9263DESK16L 3309 +bcmhana_sv MACH_BCMHANA_SV BCMHANA_SV 3310 +bcmhana_tablet MACH_BCMHANA_TABLET BCMHANA_TABLET 3311 +koi MACH_KOI KOI 3312 +ts4800 MACH_TS4800 TS4800 3313 +tqma9263 MACH_TQMA9263 TQMA9263 3314 +holiday MACH_HOLIDAY HOLIDAY 3315 +dma_6410 MACH_DMA6410 DMA6410 3316 +pcats_overlay MACH_PCATS_OVERLAY PCATS_OVERLAY 3317 +hwgw6410 MACH_HWGW6410 HWGW6410 3318 +shenzhou MACH_SHENZHOU SHENZHOU 3319 +cwme9210 MACH_CWME9210 CWME9210 3320 +cwme9210js MACH_CWME9210JS CWME9210JS 3321 +pgs_v1 MACH_PGS_SITARA PGS_SITARA 3322 +colibri_tegra2 MACH_COLIBRI_TEGRA2 COLIBRI_TEGRA2 3323 +w21 MACH_W21 W21 3324 +polysat1 MACH_POLYSAT1 POLYSAT1 3325 +dataway MACH_DATAWAY DATAWAY 3326 +cobral138 MACH_COBRAL138 COBRAL138 3327 +roverpcs8 MACH_ROVERPCS8 ROVERPCS8 3328 +marvelc MACH_MARVELC MARVELC 3329 +navefihid MACH_NAVEFIHID NAVEFIHID 3330 +dm365_cv100 MACH_DM365_CV100 DM365_CV100 3331 +able MACH_ABLE ABLE 3332 +legacy MACH_LEGACY LEGACY 3333 +icong MACH_ICONG ICONG 3334 +rover_g8 MACH_ROVER_G8 ROVER_G8 3335 +t5388p MACH_T5388P T5388P 3336 +dingo MACH_DINGO DINGO 3337 +goflexhome MACH_GOFLEXHOME GOFLEXHOME 3338 -- cgit v1.2.3-18-g5258 From 9d20b571f5bda7273656e1b86ef91eddc94adacc Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Mon, 7 Feb 2011 20:26:06 +1100 Subject: crypto: sha-s390 - Reset index after processing partial block The partial block handling in sha-s390 is broken when we get a partial block that is followed by an update which fills it with bytes left-over. Instead of storing the newly left-over bytes at the start of the buffer, it will be stored immediately after the previous partial block. This patch fixes this by resetting the index pointer. Signed-off-by: Herbert Xu --- arch/s390/crypto/sha_common.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/s390/crypto/sha_common.c b/arch/s390/crypto/sha_common.c index f42dbabc0d3..48884f89ab9 100644 --- a/arch/s390/crypto/sha_common.c +++ b/arch/s390/crypto/sha_common.c @@ -38,6 +38,7 @@ int s390_sha_update(struct shash_desc *desc, const u8 *data, unsigned int len) BUG_ON(ret != bsize); data += bsize - index; len -= bsize - index; + index = 0; } /* process as many blocks as possible */ -- cgit v1.2.3-18-g5258 From 1232a185ddd500b61b8dc389ad1a357e6b425548 Mon Sep 17 00:00:00 2001 From: Vasiliy Kulikov Date: Fri, 4 Feb 2011 12:23:20 +0000 Subject: mach-omap2: smartreflex: world-writable debugfs voltage files Don't allow everybody to change voltage settings. Signed-off-by: Vasiliy Kulikov Acked-by: Kevin Hilman Acked-by: Nishanth Menon Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/smartreflex.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index c37e823266d..95ac336fe3f 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -900,7 +900,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) return PTR_ERR(dbg_dir); } - (void) debugfs_create_file("autocomp", S_IRUGO | S_IWUGO, dbg_dir, + (void) debugfs_create_file("autocomp", S_IRUGO | S_IWUSR, dbg_dir, (void *)sr_info, &pm_sr_fops); (void) debugfs_create_x32("errweight", S_IRUGO, dbg_dir, &sr_info->err_weight); @@ -939,7 +939,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) strcpy(name, "volt_"); sprintf(volt_name, "%d", volt_data[i].volt_nominal); strcat(name, volt_name); - (void) debugfs_create_x32(name, S_IRUGO | S_IWUGO, nvalue_dir, + (void) debugfs_create_x32(name, S_IRUGO | S_IWUSR, nvalue_dir, &(sr_info->nvalue_table[i].nvalue)); } -- cgit v1.2.3-18-g5258 From 12dfc73e1ddb44b2d23e0ca614b6ec50596adae0 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 7 Feb 2011 13:32:55 +0100 Subject: microblaze: Fix IRQ flag handling for MSR=0 Patch: Fix IRQ flag handling naming (sha1: f9ee29270c11dba7d0fe0b83ce47a4d8e8d2101) introduced problem on system with MSR=0. Signed-off-by: Michal Simek --- arch/microblaze/include/asm/irqflags.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/microblaze/include/asm/irqflags.h b/arch/microblaze/include/asm/irqflags.h index 5fd31905775..c4532f032b3 100644 --- a/arch/microblaze/include/asm/irqflags.h +++ b/arch/microblaze/include/asm/irqflags.h @@ -12,7 +12,7 @@ #include #include -#ifdef CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR +#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR static inline unsigned long arch_local_irq_save(void) { -- cgit v1.2.3-18-g5258 From 1649700408531ec64ae33af55a1091db50d1f7da Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 7 Feb 2011 11:29:43 +0100 Subject: microblaze: Fix asm compilation warning Microblaze ASM doesn't support hex values for mfs instructions. /tmp/ccwiXVmt.s: Assembler messages: /tmp/ccwiXVmt.s:19: Warning: ignoring operands: x00 Signed-off-by: Michal Simek --- arch/microblaze/kernel/cpu/pvr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/kernel/cpu/pvr.c b/arch/microblaze/kernel/cpu/pvr.c index e01afa68273..488c1ed24e3 100644 --- a/arch/microblaze/kernel/cpu/pvr.c +++ b/arch/microblaze/kernel/cpu/pvr.c @@ -27,7 +27,7 @@ register unsigned tmp __asm__("r3"); \ tmp = 0x0; /* Prevent warning about unused */ \ __asm__ __volatile__ ( \ - "mfs %0, rpvr" #pvrid ";" \ + "mfs %0, rpvr" #pvrid ";" \ : "=r" (tmp) : : "memory"); \ val = tmp; \ } @@ -54,7 +54,7 @@ int cpu_has_pvr(void) if (!(flags & PVR_MSR_BIT)) return 0; - get_single_pvr(0x00, pvr0); + get_single_pvr(0, pvr0); pr_debug("%s: pvr0 is 0x%08x\n", __func__, pvr0); if (pvr0 & PVR0_PVR_FULL_MASK) -- cgit v1.2.3-18-g5258 From 1f80a67da2da4180355bc36b2691f16684b194fd Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 7 Feb 2011 18:51:54 +0100 Subject: microblaze: Fix pte_update function Do not disable irq in asm but use irq macros. Systems with MSR=0 couldn't use pte_update function because msrclr was hardcoded. Signed-off-by: Michal Simek --- arch/microblaze/include/asm/pgtable.h | 27 +++++++++++++-------------- 1 file changed, 13 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h index b23f6807587..885574a73f0 100644 --- a/arch/microblaze/include/asm/pgtable.h +++ b/arch/microblaze/include/asm/pgtable.h @@ -411,20 +411,19 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) static inline unsigned long pte_update(pte_t *p, unsigned long clr, unsigned long set) { - unsigned long old, tmp, msr; - - __asm__ __volatile__("\ - msrclr %2, 0x2\n\ - nop\n\ - lw %0, %4, r0\n\ - andn %1, %0, %5\n\ - or %1, %1, %6\n\ - sw %1, %4, r0\n\ - mts rmsr, %2\n\ - nop" - : "=&r" (old), "=&r" (tmp), "=&r" (msr), "=m" (*p) - : "r" ((unsigned long)(p + 1) - 4), "r" (clr), "r" (set), "m" (*p) - : "cc"); + unsigned long flags, old, tmp; + + raw_local_irq_save(flags); + + __asm__ __volatile__( "lw %0, %2, r0 \n" + "andn %1, %0, %3 \n" + "or %1, %1, %4 \n" + "sw %1, %2, r0 \n" + : "=&r" (old), "=&r" (tmp) + : "r" ((unsigned long)(p + 1) - 4), "r" (clr), "r" (set) + : "cc"); + + raw_local_irq_restore(flags); return old; } -- cgit v1.2.3-18-g5258 From 0eb6aaf52965c14ba3ea245448c4806cfcd1d18c Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 4 Feb 2011 15:24:11 +0100 Subject: microblaze: Fix msr instruction detection Fix msr instructions detection. The current code just use msrclr for loading msr content and compare it with proper MSR content. If msrclr is not implemented r8 contains pc address. Previous code wanted to use MSR carry bit but if msrclr wasn't implemented carry wasn't cleared. Signed-off-by: Michal Simek --- arch/microblaze/kernel/head.S | 15 +++++++-------- arch/microblaze/kernel/setup.c | 4 ++-- 2 files changed, 9 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S index 0db20b5abb5..778a5ce2e4f 100644 --- a/arch/microblaze/kernel/head.S +++ b/arch/microblaze/kernel/head.S @@ -62,15 +62,14 @@ real_start: andi r1, r1, ~2 mts rmsr, r1 /* - * Here is checking mechanism which check if Microblaze has msr instructions - * We load msr and compare it with previous r1 value - if is the same, - * msr instructions works if not - cpu don't have them. + * According to Xilinx, msrclr instruction behaves like 'mfs rX,rpc' + * if the msrclr instruction is not enabled. We use this to detect + * if the opcode is available, by issuing msrclr and then testing the result. + * r8 == 0 - msr instructions are implemented + * r8 != 0 - msr instructions are not implemented */ - /* r8=0 - I have msr instr, 1 - I don't have them */ - rsubi r0, r0, 1 /* set the carry bit */ - msrclr r0, 0x4 /* try to clear it */ - /* read the carry bit, r8 will be '0' if msrclr exists */ - addik r8, r0, 0 + msrclr r8, 0 /* clear nothing - just read msr for test */ + cmpu r8, r8, r1 /* r1 must contain msr reg content */ /* r7 may point to an FDT, or there may be one linked in. if it's in r7, we've got to save it away ASAP. diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c index bb1558e4b28..9312fbb37ef 100644 --- a/arch/microblaze/kernel/setup.c +++ b/arch/microblaze/kernel/setup.c @@ -161,11 +161,11 @@ void __init machine_early_init(const char *cmdline, unsigned int ram, #if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR if (msr) eprintk("!!!Your kernel has setup MSR instruction but " - "CPU don't have it %d\n", msr); + "CPU don't have it %x\n", msr); #else if (!msr) eprintk("!!!Your kernel not setup MSR instruction but " - "CPU have it %d\n", msr); + "CPU have it %x\n", msr); #endif for (src = __ivt_start; src < __ivt_end; src++, dst++) -- cgit v1.2.3-18-g5258 From cabb5bd7ff4d6963ec9e67f958fc30e7815425e6 Mon Sep 17 00:00:00 2001 From: Hans Rosenfeld Date: Mon, 7 Feb 2011 18:10:39 +0100 Subject: x86, amd: Support L3 Cache Partitioning on AMD family 0x15 CPUs L3 Cache Partitioning allows selecting which of the 4 L3 subcaches can be used for evictions by the L2 cache of each compute unit. By writing a 4-bit hexadecimal mask into the the sysfs file /sys/devices/system/cpu/cpuX/cache/index3/subcaches, the user can set the enabled subcaches for a CPU. The settings are directly read from and written to the hardware, so there is no way to have contradicting settings for two CPUs belonging to the same compute unit. Writing will always overwrite any previous setting for a compute unit. Signed-off-by: Hans Rosenfeld Cc: LKML-Reference: <1297098639-431383-1-git-send-email-hans.rosenfeld@amd.com> [ -v3: minor style fixes ] Signed-off-by: Ingo Molnar --- arch/x86/include/asm/amd_nb.h | 3 ++ arch/x86/kernel/amd_nb.c | 63 +++++++++++++++++++++++++++++ arch/x86/kernel/cpu/intel_cacheinfo.c | 76 ++++++++++++++++++++++++++++------- 3 files changed, 127 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/amd_nb.h b/arch/x86/include/asm/amd_nb.h index 3e7070071d7..423f11ca6ee 100644 --- a/arch/x86/include/asm/amd_nb.h +++ b/arch/x86/include/asm/amd_nb.h @@ -18,6 +18,8 @@ extern int amd_cache_northbridges(void); extern void amd_flush_garts(void); extern int amd_numa_init(unsigned long start_pfn, unsigned long end_pfn); extern int amd_scan_nodes(void); +extern int amd_get_subcaches(int); +extern int amd_set_subcaches(int, int); #ifdef CONFIG_NUMA_EMU extern void amd_fake_nodes(const struct bootnode *nodes, int nr_nodes); @@ -38,6 +40,7 @@ extern struct amd_northbridge_info amd_northbridges; #define AMD_NB_GART 0x1 #define AMD_NB_L3_INDEX_DISABLE 0x2 +#define AMD_NB_L3_PARTITIONING 0x4 #ifdef CONFIG_AMD_NB diff --git a/arch/x86/kernel/amd_nb.c b/arch/x86/kernel/amd_nb.c index 4ae9a961c33..bf79a4a6ee2 100644 --- a/arch/x86/kernel/amd_nb.c +++ b/arch/x86/kernel/amd_nb.c @@ -95,6 +95,10 @@ int amd_cache_northbridges(void) if (boot_cpu_data.x86 == 0x15) amd_northbridges.flags |= AMD_NB_L3_INDEX_DISABLE; + /* L3 cache partitioning is supported on family 0x15 */ + if (boot_cpu_data.x86 == 0x15) + amd_northbridges.flags |= AMD_NB_L3_PARTITIONING; + return 0; } EXPORT_SYMBOL_GPL(amd_cache_northbridges); @@ -112,6 +116,65 @@ int __init early_is_amd_nb(u32 device) return 0; } +int amd_get_subcaches(int cpu) +{ + struct pci_dev *link = node_to_amd_nb(amd_get_nb_id(cpu))->link; + unsigned int mask; + int cuid = 0; + + if (!amd_nb_has_feature(AMD_NB_L3_PARTITIONING)) + return 0; + + pci_read_config_dword(link, 0x1d4, &mask); + +#ifdef CONFIG_SMP + cuid = cpu_data(cpu).compute_unit_id; +#endif + return (mask >> (4 * cuid)) & 0xf; +} + +int amd_set_subcaches(int cpu, int mask) +{ + static unsigned int reset, ban; + struct amd_northbridge *nb = node_to_amd_nb(amd_get_nb_id(cpu)); + unsigned int reg; + int cuid = 0; + + if (!amd_nb_has_feature(AMD_NB_L3_PARTITIONING) || mask > 0xf) + return -EINVAL; + + /* if necessary, collect reset state of L3 partitioning and BAN mode */ + if (reset == 0) { + pci_read_config_dword(nb->link, 0x1d4, &reset); + pci_read_config_dword(nb->misc, 0x1b8, &ban); + ban &= 0x180000; + } + + /* deactivate BAN mode if any subcaches are to be disabled */ + if (mask != 0xf) { + pci_read_config_dword(nb->misc, 0x1b8, ®); + pci_write_config_dword(nb->misc, 0x1b8, reg & ~0x180000); + } + +#ifdef CONFIG_SMP + cuid = cpu_data(cpu).compute_unit_id; +#endif + mask <<= 4 * cuid; + mask |= (0xf ^ (1 << cuid)) << 26; + + pci_write_config_dword(nb->link, 0x1d4, mask); + + /* reset BAN mode if L3 partitioning returned to reset state */ + pci_read_config_dword(nb->link, 0x1d4, ®); + if (reg == reset) { + pci_read_config_dword(nb->misc, 0x1b8, ®); + reg &= ~0x180000; + pci_write_config_dword(nb->misc, 0x1b8, reg | ban); + } + + return 0; +} + int amd_cache_gart(void) { int i; diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index ec2c19a7b8e..90cc675ac74 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -304,8 +304,9 @@ amd_cpuid4(int leaf, union _cpuid4_leaf_eax *eax, struct _cache_attr { struct attribute attr; - ssize_t (*show)(struct _cpuid4_info *, char *); - ssize_t (*store)(struct _cpuid4_info *, const char *, size_t count); + ssize_t (*show)(struct _cpuid4_info *, char *, unsigned int); + ssize_t (*store)(struct _cpuid4_info *, const char *, size_t count, + unsigned int); }; #ifdef CONFIG_AMD_NB @@ -400,7 +401,8 @@ static ssize_t show_cache_disable(struct _cpuid4_info *this_leaf, char *buf, #define SHOW_CACHE_DISABLE(slot) \ static ssize_t \ -show_cache_disable_##slot(struct _cpuid4_info *this_leaf, char *buf) \ +show_cache_disable_##slot(struct _cpuid4_info *this_leaf, char *buf, \ + unsigned int cpu) \ { \ return show_cache_disable(this_leaf, buf, slot); \ } @@ -512,7 +514,8 @@ static ssize_t store_cache_disable(struct _cpuid4_info *this_leaf, #define STORE_CACHE_DISABLE(slot) \ static ssize_t \ store_cache_disable_##slot(struct _cpuid4_info *this_leaf, \ - const char *buf, size_t count) \ + const char *buf, size_t count, \ + unsigned int cpu) \ { \ return store_cache_disable(this_leaf, buf, count, slot); \ } @@ -524,6 +527,39 @@ static struct _cache_attr cache_disable_0 = __ATTR(cache_disable_0, 0644, static struct _cache_attr cache_disable_1 = __ATTR(cache_disable_1, 0644, show_cache_disable_1, store_cache_disable_1); +static ssize_t +show_subcaches(struct _cpuid4_info *this_leaf, char *buf, unsigned int cpu) +{ + if (!this_leaf->l3 || !amd_nb_has_feature(AMD_NB_L3_PARTITIONING)) + return -EINVAL; + + return sprintf(buf, "%x\n", amd_get_subcaches(cpu)); +} + +static ssize_t +store_subcaches(struct _cpuid4_info *this_leaf, const char *buf, size_t count, + unsigned int cpu) +{ + unsigned long val; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + if (!this_leaf->l3 || !amd_nb_has_feature(AMD_NB_L3_PARTITIONING)) + return -EINVAL; + + if (strict_strtoul(buf, 16, &val) < 0) + return -EINVAL; + + if (amd_set_subcaches(cpu, val)) + return -EINVAL; + + return count; +} + +static struct _cache_attr subcaches = + __ATTR(subcaches, 0644, show_subcaches, store_subcaches); + #else /* CONFIG_AMD_NB */ #define amd_init_l3_cache(x, y) #endif /* CONFIG_AMD_NB */ @@ -532,9 +568,9 @@ static int __cpuinit cpuid4_cache_lookup_regs(int index, struct _cpuid4_info_regs *this_leaf) { - union _cpuid4_leaf_eax eax; - union _cpuid4_leaf_ebx ebx; - union _cpuid4_leaf_ecx ecx; + union _cpuid4_leaf_eax eax; + union _cpuid4_leaf_ebx ebx; + union _cpuid4_leaf_ecx ecx; unsigned edx; if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) { @@ -870,8 +906,8 @@ static DEFINE_PER_CPU(struct _index_kobject *, ici_index_kobject); #define INDEX_KOBJECT_PTR(x, y) (&((per_cpu(ici_index_kobject, x))[y])) #define show_one_plus(file_name, object, val) \ -static ssize_t show_##file_name \ - (struct _cpuid4_info *this_leaf, char *buf) \ +static ssize_t show_##file_name(struct _cpuid4_info *this_leaf, char *buf, \ + unsigned int cpu) \ { \ return sprintf(buf, "%lu\n", (unsigned long)this_leaf->object + val); \ } @@ -882,7 +918,8 @@ show_one_plus(physical_line_partition, ebx.split.physical_line_partition, 1); show_one_plus(ways_of_associativity, ebx.split.ways_of_associativity, 1); show_one_plus(number_of_sets, ecx.split.number_of_sets, 1); -static ssize_t show_size(struct _cpuid4_info *this_leaf, char *buf) +static ssize_t show_size(struct _cpuid4_info *this_leaf, char *buf, + unsigned int cpu) { return sprintf(buf, "%luK\n", this_leaf->size / 1024); } @@ -906,17 +943,20 @@ static ssize_t show_shared_cpu_map_func(struct _cpuid4_info *this_leaf, return n; } -static inline ssize_t show_shared_cpu_map(struct _cpuid4_info *leaf, char *buf) +static inline ssize_t show_shared_cpu_map(struct _cpuid4_info *leaf, char *buf, + unsigned int cpu) { return show_shared_cpu_map_func(leaf, 0, buf); } -static inline ssize_t show_shared_cpu_list(struct _cpuid4_info *leaf, char *buf) +static inline ssize_t show_shared_cpu_list(struct _cpuid4_info *leaf, char *buf, + unsigned int cpu) { return show_shared_cpu_map_func(leaf, 1, buf); } -static ssize_t show_type(struct _cpuid4_info *this_leaf, char *buf) +static ssize_t show_type(struct _cpuid4_info *this_leaf, char *buf, + unsigned int cpu) { switch (this_leaf->eax.split.type) { case CACHE_TYPE_DATA: @@ -974,6 +1014,9 @@ static struct attribute ** __cpuinit amd_l3_attrs(void) if (amd_nb_has_feature(AMD_NB_L3_INDEX_DISABLE)) n += 2; + if (amd_nb_has_feature(AMD_NB_L3_PARTITIONING)) + n += 1; + attrs = kzalloc(n * sizeof (struct attribute *), GFP_KERNEL); if (attrs == NULL) return attrs = default_attrs; @@ -986,6 +1029,9 @@ static struct attribute ** __cpuinit amd_l3_attrs(void) attrs[n++] = &cache_disable_1.attr; } + if (amd_nb_has_feature(AMD_NB_L3_PARTITIONING)) + attrs[n++] = &subcaches.attr; + return attrs; } #endif @@ -998,7 +1044,7 @@ static ssize_t show(struct kobject *kobj, struct attribute *attr, char *buf) ret = fattr->show ? fattr->show(CPUID4_INFO_IDX(this_leaf->cpu, this_leaf->index), - buf) : + buf, this_leaf->cpu) : 0; return ret; } @@ -1012,7 +1058,7 @@ static ssize_t store(struct kobject *kobj, struct attribute *attr, ret = fattr->store ? fattr->store(CPUID4_INFO_IDX(this_leaf->cpu, this_leaf->index), - buf, count) : + buf, count, this_leaf->cpu) : 0; return ret; } -- cgit v1.2.3-18-g5258 From b3e338de7e11d1e5bc4eca12833d894d1838b510 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Thu, 3 Feb 2011 11:17:55 +1000 Subject: m68knommu: fix use of un-defined _TIF_WORK_MASK The _TIF_WORK_MASK definition was removed in the clean up of MMU and non-MMU arch/m68k/include/asm/thread_info*.h files (this was commit cddafa3500fde4a07e5bf899ec97a04069f8f7ce, "merge MMU and non-MMU thread_info.h"). It didn't get cleaned out of the entry.S code for the 68328 and 68360 based platforms. And it was replaced by a hard coded constant mask for coldfire platforms. There is currently no need to mask any of these bits, so fix all uses (and former uses) to check for any non-zero value. Signed-off-by: Greg Ungerer --- arch/m68knommu/platform/68328/entry.S | 1 - arch/m68knommu/platform/68360/entry.S | 1 - arch/m68knommu/platform/coldfire/entry.S | 1 - 3 files changed, 3 deletions(-) (limited to 'arch') diff --git a/arch/m68knommu/platform/68328/entry.S b/arch/m68knommu/platform/68328/entry.S index 240a7a6e25c..676960cf022 100644 --- a/arch/m68knommu/platform/68328/entry.S +++ b/arch/m68knommu/platform/68328/entry.S @@ -108,7 +108,6 @@ Luser_return: movel %d1,%a2 1: move %a2@(TI_FLAGS),%d1 /* thread_info->flags */ - andl #_TIF_WORK_MASK,%d1 jne Lwork_to_do RESTORE_ALL diff --git a/arch/m68knommu/platform/68360/entry.S b/arch/m68knommu/platform/68360/entry.S index 8a28788c0ee..46c1b18c9dc 100644 --- a/arch/m68knommu/platform/68360/entry.S +++ b/arch/m68knommu/platform/68360/entry.S @@ -104,7 +104,6 @@ Luser_return: movel %d1,%a2 1: move %a2@(TI_FLAGS),%d1 /* thread_info->flags */ - andl #_TIF_WORK_MASK,%d1 jne Lwork_to_do RESTORE_ALL diff --git a/arch/m68knommu/platform/coldfire/entry.S b/arch/m68knommu/platform/coldfire/entry.S index 4ddfc3da70d..5837cf080b6 100644 --- a/arch/m68knommu/platform/coldfire/entry.S +++ b/arch/m68knommu/platform/coldfire/entry.S @@ -138,7 +138,6 @@ Luser_return: andl #-THREAD_SIZE,%d1 /* at base of kernel stack */ movel %d1,%a0 movel %a0@(TI_FLAGS),%d1 /* get thread_info->flags */ - andl #0xefff,%d1 jne Lwork_to_do /* still work to do */ Lreturn: -- cgit v1.2.3-18-g5258 From c13ff2ff3ad1479f222e18f9caba3db5af68d549 Mon Sep 17 00:00:00 2001 From: Seth Heasley Date: Mon, 10 Jan 2011 13:08:37 -0800 Subject: PCI/lpc: irq and pci_ids patch for Intel DH89xxCC DeviceIDs This patch adds the LPC Controller DeviceIDs for the Intel DH89xxCC PCH. The code for capturing ranges of LPC Controller DeviceIDs has also been updated. Acked-by: Jean Delvare Signed-off-by: Seth Heasley Signed-off-by: Jesse Barnes --- arch/x86/pci/irq.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c index 87e6c832311..8201165bae2 100644 --- a/arch/x86/pci/irq.c +++ b/arch/x86/pci/irq.c @@ -597,21 +597,18 @@ static __init int intel_router_probe(struct irq_router *r, struct pci_dev *route return 1; } - if ((device >= PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MIN) && - (device <= PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MAX)) { + if ((device >= PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MIN && + device <= PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MAX) + || (device >= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MIN && + device <= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MAX) + || (device >= PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MIN && + device <= PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MAX)) { r->name = "PIIX/ICH"; r->get = pirq_piix_get; r->set = pirq_piix_set; return 1; } - if ((device >= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MIN) && - (device <= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MAX)) { - r->name = "PIIX/ICH"; - r->get = pirq_piix_get; - r->set = pirq_piix_set; - return 1; - } return 0; } -- cgit v1.2.3-18-g5258 From e637804c33494e8e7e454dbc625cc4b773f38d6f Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Tue, 8 Feb 2011 04:59:49 +0000 Subject: sparc: use bitmap_set() Use bitmap_set() instead of calling __set_bit() each bit. Signed-off-by: Akinobu Mita Cc: "David S. Miller" Cc: sparclinux@vger.kernel.org Signed-off-by: David S. Miller --- arch/sparc/lib/bitext.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/sparc/lib/bitext.c b/arch/sparc/lib/bitext.c index 764b3eb7b60..48d00e72ce1 100644 --- a/arch/sparc/lib/bitext.c +++ b/arch/sparc/lib/bitext.c @@ -10,7 +10,7 @@ */ #include -#include +#include #include @@ -80,8 +80,7 @@ int bit_map_string_get(struct bit_map *t, int len, int align) while (test_bit(offset + i, t->map) == 0) { i++; if (i == len) { - for (i = 0; i < len; i++) - __set_bit(offset + i, t->map); + bitmap_set(t->map, offset, len); if (offset == t->first_free) t->first_free = find_next_zero_bit (t->map, t->size, -- cgit v1.2.3-18-g5258 From 711c71a092ccedf5e24cff25e577bfa0148fce66 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Tue, 8 Feb 2011 04:59:50 +0000 Subject: sparc: fix size argument to find_next_zero_bit() iommu_alloc_ctx() finds a zero bit in iommu->ctx_bitmap. It starts searching from iommu->ctx_lowest_free to the end of the bitmap. But the size argument to find_next_zero_bit() in iommu_alloc_ctx() is wrong. It should be the bitmap size, not the maximum size to search from the offset argument. Fortunately iommu->ctx_lowest_free is almost unused and it will not be more than 1. So the bug wasted only 1-bit at the end of iommu->ctx_bitmap. Signed-off-by: Akinobu Mita Cc: "David S. Miller" Cc: sparclinux@vger.kernel.org Signed-off-by: David S. Miller --- arch/sparc/kernel/iommu.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/sparc/kernel/iommu.c b/arch/sparc/kernel/iommu.c index 47977a77f6c..72509d0e34b 100644 --- a/arch/sparc/kernel/iommu.c +++ b/arch/sparc/kernel/iommu.c @@ -255,10 +255,9 @@ static inline iopte_t *alloc_npages(struct device *dev, struct iommu *iommu, static int iommu_alloc_ctx(struct iommu *iommu) { int lowest = iommu->ctx_lowest_free; - int sz = IOMMU_NUM_CTXS - lowest; - int n = find_next_zero_bit(iommu->ctx_bitmap, sz, lowest); + int n = find_next_zero_bit(iommu->ctx_bitmap, IOMMU_NUM_CTXS, lowest); - if (unlikely(n == sz)) { + if (unlikely(n == IOMMU_NUM_CTXS)) { n = find_next_zero_bit(iommu->ctx_bitmap, lowest, 1); if (unlikely(n == lowest)) { printk(KERN_WARNING "IOMMU: Ran out of contexts.\n"); -- cgit v1.2.3-18-g5258 From 0c7fbbe1a15e419eb2f1a687444330c4016fdb8f Mon Sep 17 00:00:00 2001 From: Yu Tang Date: Wed, 19 Jan 2011 22:18:54 +0800 Subject: ARM: pxa: fix mfpr_sync to read from valid offset Since mfpr_mmio_base[0] is not always valid on later SoCs, fixed mpfr_sync() to read back from valid mfp offset always. Signed-off-by: Yu Tang Signed-off-by: Eric Miao --- arch/arm/plat-pxa/mfp.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c index b77e018d36c..a9aa5ad3f4e 100644 --- a/arch/arm/plat-pxa/mfp.c +++ b/arch/arm/plat-pxa/mfp.c @@ -139,10 +139,11 @@ static const unsigned long mfpr_edge[] = { #define mfp_configured(p) ((p)->config != -1) /* - * perform a read-back of any MFPR register to make sure the + * perform a read-back of any valid MFPR register to make sure the * previous writings are finished */ -#define mfpr_sync() (void)__raw_readl(mfpr_mmio_base + 0) +static unsigned long mfpr_off_readback; +#define mfpr_sync() (void)__raw_readl(mfpr_mmio_base + mfpr_off_readback) static inline void __mfp_config_run(struct mfp_pin *p) { @@ -248,6 +249,9 @@ void __init mfp_init_addr(struct mfp_addr_map *map) spin_lock_irqsave(&mfp_spin_lock, flags); + /* mfp offset for readback */ + mfpr_off_readback = map[0].offset; + for (p = map; p->start != MFP_PIN_INVALID; p++) { offset = p->offset; i = p->start; -- cgit v1.2.3-18-g5258 From 57834a722473848338b1967f7fdd9907c713b0a7 Mon Sep 17 00:00:00 2001 From: Bjørn Forsman Date: Thu, 23 Dec 2010 16:01:02 +0100 Subject: ARM: pxa/colibri: use correct SD detect pin The use of wrong SD detect pin was introduced by this commit: ARM: pxa: Push Colibri evalboard MFP into module files This fixes it. Signed-off-by: Eric Miao --- arch/arm/mach-pxa/colibri-evalboard.c | 2 +- arch/arm/mach-pxa/colibri-pxa300.c | 2 +- arch/arm/mach-pxa/include/mach/colibri.h | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c index 6b2c800a113..28f667e52ef 100644 --- a/arch/arm/mach-pxa/colibri-evalboard.c +++ b/arch/arm/mach-pxa/colibri-evalboard.c @@ -50,7 +50,7 @@ static void __init colibri_mmc_init(void) GPIO0_COLIBRI_PXA270_SD_DETECT; if (machine_is_colibri300()) /* PXA300 Colibri */ colibri_mci_platform_data.gpio_card_detect = - GPIO39_COLIBRI_PXA300_SD_DETECT; + GPIO13_COLIBRI_PXA300_SD_DETECT; else /* PXA320 Colibri */ colibri_mci_platform_data.gpio_card_detect = GPIO28_COLIBRI_PXA320_SD_DETECT; diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c index fddb16d07eb..66dd81cbc8a 100644 --- a/arch/arm/mach-pxa/colibri-pxa300.c +++ b/arch/arm/mach-pxa/colibri-pxa300.c @@ -41,7 +41,7 @@ static mfp_cfg_t colibri_pxa300_evalboard_pin_config[] __initdata = { GPIO4_MMC1_DAT1, GPIO5_MMC1_DAT2, GPIO6_MMC1_DAT3, - GPIO39_GPIO, /* SD detect */ + GPIO13_GPIO, /* GPIO13_COLIBRI_PXA300_SD_DETECT */ /* UHC */ GPIO0_2_USBH_PEN, diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h index 388a96f1ef9..cb4236e98a0 100644 --- a/arch/arm/mach-pxa/include/mach/colibri.h +++ b/arch/arm/mach-pxa/include/mach/colibri.h @@ -60,7 +60,7 @@ static inline void colibri_pxa3xx_init_nand(void) {} #define GPIO113_COLIBRI_PXA270_TS_IRQ 113 /* GPIO definitions for Colibri PXA300/310 */ -#define GPIO39_COLIBRI_PXA300_SD_DETECT 39 +#define GPIO13_COLIBRI_PXA300_SD_DETECT 13 /* GPIO definitions for Colibri PXA320 */ #define GPIO28_COLIBRI_PXA320_SD_DETECT 28 -- cgit v1.2.3-18-g5258 From 3d9cb0eafd024d6fc1b1583ff9b17e5f60951fd9 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Wed, 26 Jan 2011 05:04:00 +0800 Subject: ARM: pxa: only save/restore registers when pm functions are defined Reported-and-tested-by: Sven Neumann Signed-off-by: Eric Miao --- arch/arm/mach-pxa/pm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c index 978e1b28954..1807c9abdde 100644 --- a/arch/arm/mach-pxa/pm.c +++ b/arch/arm/mach-pxa/pm.c @@ -33,7 +33,7 @@ int pxa_pm_enter(suspend_state_t state) #endif /* skip registers saving for standby */ - if (state != PM_SUSPEND_STANDBY) { + if (state != PM_SUSPEND_STANDBY && pxa_cpu_pm_fns->save) { pxa_cpu_pm_fns->save(sleep_save); /* before sleeping, calculate and save a checksum */ for (i = 0; i < pxa_cpu_pm_fns->save_count - 1; i++) @@ -44,7 +44,7 @@ int pxa_pm_enter(suspend_state_t state) pxa_cpu_pm_fns->enter(state); cpu_init(); - if (state != PM_SUSPEND_STANDBY) { + if (state != PM_SUSPEND_STANDBY && pxa_cpu_pm_fns->restore) { /* after sleeping, validate the checksum */ for (i = 0; i < pxa_cpu_pm_fns->save_count - 1; i++) checksum += sleep_save[i]; -- cgit v1.2.3-18-g5258 From 285ca2ee31a5999e6498e6b2466f346bb5f0047c Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 31 Jan 2011 23:06:53 +0100 Subject: ARM: pxa: Properly configure PWM period for palm27x Signed-off-by: Marek Vasut Signed-off-by: Eric Miao --- arch/arm/mach-pxa/palm27x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c index 405b92a2979..35572c427fa 100644 --- a/arch/arm/mach-pxa/palm27x.c +++ b/arch/arm/mach-pxa/palm27x.c @@ -323,7 +323,7 @@ static struct platform_pwm_backlight_data palm27x_backlight_data = { .pwm_id = 0, .max_brightness = 0xfe, .dft_brightness = 0x7e, - .pwm_period_ns = 3500, + .pwm_period_ns = 3500 * 1024, .init = palm27x_backlight_init, .notify = palm27x_backlight_notify, .exit = palm27x_backlight_exit, -- cgit v1.2.3-18-g5258 From 6c53cbfced048c421e4f72cb2183465f68fbc5e7 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Thu, 6 Jan 2011 16:56:51 +0100 Subject: x86, microcode: Correct sysdev_add error path When we encounter an error while initting the microcode driver on a CPU, we must undo the previously added sysfs group. Cc: Tigran Aivazian Signed-off-by: Borislav Petkov Acked-by: Andreas Herrmann --- arch/x86/kernel/microcode_core.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c index 1cca374a2ba..87af68e0e1e 100644 --- a/arch/x86/kernel/microcode_core.c +++ b/arch/x86/kernel/microcode_core.c @@ -417,8 +417,10 @@ static int mc_sysdev_add(struct sys_device *sys_dev) if (err) return err; - if (microcode_init_cpu(cpu) == UCODE_ERROR) - err = -EINVAL; + if (microcode_init_cpu(cpu) == UCODE_ERROR) { + sysfs_remove_group(&sys_dev->kobj, &mc_attr_group); + return -EINVAL; + } return err; } -- cgit v1.2.3-18-g5258 From ffc7e8ac820bf9dd6106b01d3e64fecb5177cf43 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Thu, 30 Dec 2010 21:06:01 +0100 Subject: x86, microcode, AMD: Release firmware on error When the ucode magic is wrong, for whatever reason, we don't release the loaded firmware binary and its related resources. Make sure we do. Also, fix function naming to fit this driver's convention and shorten variable names. Signed-off-by: Borislav Petkov Acked-by: Andreas Herrmann --- arch/x86/kernel/microcode_amd.c | 26 ++++++++++++++------------ 1 file changed, 14 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c index 0fe6d1a66c3..ef91df0fb64 100644 --- a/arch/x86/kernel/microcode_amd.c +++ b/arch/x86/kernel/microcode_amd.c @@ -278,27 +278,29 @@ generic_load_microcode(int cpu, const u8 *data, size_t size) return state; } -static enum ucode_state request_microcode_fw(int cpu, struct device *device) +static enum ucode_state request_microcode_amd(int cpu, struct device *device) { const char *fw_name = "amd-ucode/microcode_amd.bin"; - const struct firmware *firmware; - enum ucode_state ret; + const struct firmware *fw; + enum ucode_state ret = UCODE_NFOUND; - if (request_firmware(&firmware, fw_name, device)) { + if (request_firmware(&fw, fw_name, device)) { printk(KERN_ERR "microcode: failed to load file %s\n", fw_name); - return UCODE_NFOUND; + goto out; } - if (*(u32 *)firmware->data != UCODE_MAGIC) { - pr_err("invalid UCODE_MAGIC (0x%08x)\n", - *(u32 *)firmware->data); - return UCODE_ERROR; + ret = UCODE_ERROR; + if (*(u32 *)fw->data != UCODE_MAGIC) { + pr_err("Invalid UCODE_MAGIC (0x%08x)\n", *(u32 *)fw->data); + goto fw_release; } - ret = generic_load_microcode(cpu, firmware->data, firmware->size); + ret = generic_load_microcode(cpu, fw->data, fw->size); - release_firmware(firmware); +fw_release: + release_firmware(fw); +out: return ret; } @@ -319,7 +321,7 @@ static void microcode_fini_cpu_amd(int cpu) static struct microcode_ops microcode_amd_ops = { .request_microcode_user = request_microcode_user, - .request_microcode_fw = request_microcode_fw, + .request_microcode_fw = request_microcode_amd, .collect_cpu_info = collect_cpu_info_amd, .apply_microcode = apply_microcode_amd, .microcode_fini_cpu = microcode_fini_cpu_amd, -- cgit v1.2.3-18-g5258 From 10de52d6655ef0d4a1b8d2804db30208c26601ed Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Thu, 30 Dec 2010 22:10:12 +0100 Subject: x86, microcode, AMD: Simplify install_equiv_cpu_table There's no need to memcpy the ucode header in order to look at it only in this function - use the original buffer instead. Also, fix return type semantics by returning a negative value on error and a positive otherwise. Signed-off-by: Borislav Petkov Acked-by: Andreas Herrmann --- arch/x86/kernel/microcode_amd.c | 21 ++++++++------------- 1 file changed, 8 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c index ef91df0fb64..9a451d7182f 100644 --- a/arch/x86/kernel/microcode_amd.c +++ b/arch/x86/kernel/microcode_amd.c @@ -188,27 +188,22 @@ get_next_ucode(const u8 *buf, unsigned int size, unsigned int *mc_size) static int install_equiv_cpu_table(const u8 *buf) { - u8 *container_hdr[UCODE_CONTAINER_HEADER_SIZE]; - unsigned int *buf_pos = (unsigned int *)container_hdr; - unsigned long size; + unsigned int *ibuf = (unsigned int *)buf; + unsigned int type = ibuf[1]; + unsigned int size = ibuf[2]; - get_ucode_data(&container_hdr, buf, UCODE_CONTAINER_HEADER_SIZE); - - size = buf_pos[2]; - - if (buf_pos[1] != UCODE_EQUIV_CPU_TABLE_TYPE || !size) { + if (type != UCODE_EQUIV_CPU_TABLE_TYPE || !size) { pr_err("error: invalid type field in container file section header\n"); - return 0; + return -EINVAL; } equiv_cpu_table = vmalloc(size); if (!equiv_cpu_table) { pr_err("failed to allocate equivalent CPU table\n"); - return 0; + return -ENOMEM; } - buf += UCODE_CONTAINER_HEADER_SIZE; - get_ucode_data(equiv_cpu_table, buf, size); + get_ucode_data(equiv_cpu_table, buf + UCODE_CONTAINER_HEADER_SIZE, size); return size + UCODE_CONTAINER_HEADER_SIZE; /* add header length */ } @@ -232,7 +227,7 @@ generic_load_microcode(int cpu, const u8 *data, size_t size) enum ucode_state state = UCODE_OK; offset = install_equiv_cpu_table(ucode_ptr); - if (!offset) { + if (offset < 0) { pr_err("failed to create equivalent cpu table\n"); return UCODE_ERROR; } -- cgit v1.2.3-18-g5258 From 7cc27349cbfec271eecec9488b4bf3f3fadb2ce4 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Fri, 31 Dec 2010 16:57:48 +0100 Subject: x86, microcode, AMD: Simplify get_next_ucode Do not copy the section header but look at it directly through the pointer. Also, make it return a ptr to a ucode header directly thus dropping a bunch of unneeded casts. Finally, simplify generic_load_microcode(), while at it. Signed-off-by: Borislav Petkov Acked-by: Andreas Herrmann --- arch/x86/kernel/microcode_amd.c | 68 +++++++++++++++++++---------------------- 1 file changed, 32 insertions(+), 36 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c index 9a451d7182f..8b58fc13e37 100644 --- a/arch/x86/kernel/microcode_amd.c +++ b/arch/x86/kernel/microcode_amd.c @@ -88,9 +88,9 @@ static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig) return 0; } -static int get_matching_microcode(int cpu, void *mc, int rev) +static int get_matching_microcode(int cpu, struct microcode_header_amd *mc_hdr, + int rev) { - struct microcode_header_amd *mc_header = mc; unsigned int current_cpu_id; u16 equiv_cpu_id = 0; unsigned int i = 0; @@ -109,17 +109,17 @@ static int get_matching_microcode(int cpu, void *mc, int rev) if (!equiv_cpu_id) return 0; - if (mc_header->processor_rev_id != equiv_cpu_id) + if (mc_hdr->processor_rev_id != equiv_cpu_id) return 0; /* ucode might be chipset specific -- currently we don't support this */ - if (mc_header->nb_dev_id || mc_header->sb_dev_id) { + if (mc_hdr->nb_dev_id || mc_hdr->sb_dev_id) { pr_err("CPU%d: loading of chipset specific code not yet supported\n", cpu); return 0; } - if (mc_header->patch_id <= rev) + if (mc_hdr->patch_id <= rev) return 0; return 1; @@ -155,21 +155,18 @@ static int apply_microcode_amd(int cpu) return 0; } -static void * +static struct microcode_header_amd * get_next_ucode(const u8 *buf, unsigned int size, unsigned int *mc_size) { + struct microcode_header_amd *mc; unsigned int total_size; - u8 section_hdr[UCODE_CONTAINER_SECTION_HDR]; - void *mc; - get_ucode_data(section_hdr, buf, UCODE_CONTAINER_SECTION_HDR); - - if (section_hdr[0] != UCODE_UCODE_TYPE) { + if (buf[0] != UCODE_UCODE_TYPE) { pr_err("error: invalid type field in container file section header\n"); return NULL; } - total_size = (unsigned long) (section_hdr[4] + (section_hdr[5] << 8)); + total_size = buf[4] + (buf[5] << 8); if (total_size > size || total_size > UCODE_MAX_SIZE) { pr_err("error: size mismatch\n"); @@ -218,12 +215,12 @@ static enum ucode_state generic_load_microcode(int cpu, const u8 *data, size_t size) { struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + struct microcode_header_amd *mc_hdr = NULL; + unsigned int mc_size, leftover; + unsigned long offset; const u8 *ucode_ptr = data; void *new_mc = NULL; - void *mc; int new_rev = uci->cpu_sig.rev; - unsigned int leftover; - unsigned long offset; enum ucode_state state = UCODE_OK; offset = install_equiv_cpu_table(ucode_ptr); @@ -236,38 +233,37 @@ generic_load_microcode(int cpu, const u8 *data, size_t size) leftover = size - offset; while (leftover) { - unsigned int uninitialized_var(mc_size); - struct microcode_header_amd *mc_header; - - mc = get_next_ucode(ucode_ptr, leftover, &mc_size); - if (!mc) + mc_hdr = get_next_ucode(ucode_ptr, leftover, &mc_size); + if (!mc_hdr) break; - mc_header = (struct microcode_header_amd *)mc; - if (get_matching_microcode(cpu, mc, new_rev)) { + if (get_matching_microcode(cpu, mc_hdr, new_rev)) { vfree(new_mc); - new_rev = mc_header->patch_id; - new_mc = mc; + new_rev = mc_hdr->patch_id; + new_mc = mc_hdr; } else - vfree(mc); + vfree(mc_hdr); ucode_ptr += mc_size; leftover -= mc_size; } - if (new_mc) { - if (!leftover) { - vfree(uci->mc); - uci->mc = new_mc; - pr_debug("CPU%d found a matching microcode update with version 0x%x (current=0x%x)\n", - cpu, new_rev, uci->cpu_sig.rev); - } else { - vfree(new_mc); - state = UCODE_ERROR; - } - } else + if (!new_mc) { state = UCODE_NFOUND; + goto free_table; + } + + if (!leftover) { + vfree(uci->mc); + uci->mc = new_mc; + pr_debug("CPU%d update ucode to version 0x%x (from 0x%x)\n", + cpu, new_rev, uci->cpu_sig.rev); + } else { + vfree(new_mc); + state = UCODE_ERROR; + } +free_table: free_equiv_cpu_table(); return state; -- cgit v1.2.3-18-g5258 From 05ff02e4c0686051fcb074aec92df03f2c184fd1 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 5 Jan 2011 18:04:11 +0100 Subject: x86, microcode, AMD: Remove unneeded memset call collect_cpu_info_amd() clears its csig arg but this is done in the microcode_core's collect_cpu_info() by clearing the embedding struct ucode_cpu_info. Drop it. Signed-off-by: Borislav Petkov Acked-by: Andreas Herrmann --- arch/x86/kernel/microcode_amd.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c index 8b58fc13e37..274fa4063c7 100644 --- a/arch/x86/kernel/microcode_amd.c +++ b/arch/x86/kernel/microcode_amd.c @@ -77,7 +77,6 @@ static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig) struct cpuinfo_x86 *c = &cpu_data(cpu); u32 dummy; - memset(csig, 0, sizeof(*csig)); if (c->x86_vendor != X86_VENDOR_AMD || c->x86 < 0x10) { pr_warning("microcode: CPU%d: AMD CPU family 0x%x not " "supported\n", cpu, c->x86); -- cgit v1.2.3-18-g5258 From 258721ef34fce97a7a6ca9cebebb303827645868 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 5 Jan 2011 18:13:19 +0100 Subject: x86, microcode, AMD: Cleanup dmesg output Unify pr_* to use pr_fmt, shorten messages, correct type formatting. Signed-off-by: Borislav Petkov Acked-by: Andreas Herrmann --- arch/x86/kernel/microcode_amd.c | 30 ++++++++++++++++-------------- 1 file changed, 16 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c index 274fa4063c7..adbcef4f633 100644 --- a/arch/x86/kernel/microcode_amd.c +++ b/arch/x86/kernel/microcode_amd.c @@ -78,12 +78,13 @@ static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig) u32 dummy; if (c->x86_vendor != X86_VENDOR_AMD || c->x86 < 0x10) { - pr_warning("microcode: CPU%d: AMD CPU family 0x%x not " - "supported\n", cpu, c->x86); + pr_warning("CPU%d: family %d not supported\n", cpu, c->x86); return -1; } + rdmsr(MSR_AMD64_PATCH_LEVEL, csig->rev, dummy); - pr_info("CPU%d: patch_level=0x%x\n", cpu, csig->rev); + pr_info("CPU%d: patch_level=0x%08x\n", cpu, csig->rev); + return 0; } @@ -113,7 +114,7 @@ static int get_matching_microcode(int cpu, struct microcode_header_amd *mc_hdr, /* ucode might be chipset specific -- currently we don't support this */ if (mc_hdr->nb_dev_id || mc_hdr->sb_dev_id) { - pr_err("CPU%d: loading of chipset specific code not yet supported\n", + pr_err("CPU%d: chipset specific code not yet supported\n", cpu); return 0; } @@ -143,12 +144,12 @@ static int apply_microcode_amd(int cpu) /* check current patch id and patch's id for match */ if (rev != mc_amd->hdr.patch_id) { - pr_err("CPU%d: update failed (for patch_level=0x%x)\n", + pr_err("CPU%d: update failed for patch_level=0x%08x\n", cpu, mc_amd->hdr.patch_id); return -1; } - pr_info("CPU%d: updated (new patch_level=0x%x)\n", cpu, rev); + pr_info("CPU%d: new patch_level=0x%08x\n", cpu, rev); uci->cpu_sig.rev = rev; return 0; @@ -161,14 +162,14 @@ get_next_ucode(const u8 *buf, unsigned int size, unsigned int *mc_size) unsigned int total_size; if (buf[0] != UCODE_UCODE_TYPE) { - pr_err("error: invalid type field in container file section header\n"); + pr_err("invalid type field in container file section header\n"); return NULL; } total_size = buf[4] + (buf[5] << 8); if (total_size > size || total_size > UCODE_MAX_SIZE) { - pr_err("error: size mismatch\n"); + pr_err("section size mismatch\n"); return NULL; } @@ -189,7 +190,8 @@ static int install_equiv_cpu_table(const u8 *buf) unsigned int size = ibuf[2]; if (type != UCODE_EQUIV_CPU_TABLE_TYPE || !size) { - pr_err("error: invalid type field in container file section header\n"); + pr_err("empty section/" + "invalid type field in container file section header\n"); return -EINVAL; } @@ -219,7 +221,7 @@ generic_load_microcode(int cpu, const u8 *data, size_t size) unsigned long offset; const u8 *ucode_ptr = data; void *new_mc = NULL; - int new_rev = uci->cpu_sig.rev; + unsigned int new_rev = uci->cpu_sig.rev; enum ucode_state state = UCODE_OK; offset = install_equiv_cpu_table(ucode_ptr); @@ -255,8 +257,8 @@ generic_load_microcode(int cpu, const u8 *data, size_t size) if (!leftover) { vfree(uci->mc); uci->mc = new_mc; - pr_debug("CPU%d update ucode to version 0x%x (from 0x%x)\n", - cpu, new_rev, uci->cpu_sig.rev); + pr_debug("CPU%d update ucode (0x%08x -> 0x%08x)\n", + cpu, uci->cpu_sig.rev, new_rev); } else { vfree(new_mc); state = UCODE_ERROR; @@ -275,13 +277,13 @@ static enum ucode_state request_microcode_amd(int cpu, struct device *device) enum ucode_state ret = UCODE_NFOUND; if (request_firmware(&fw, fw_name, device)) { - printk(KERN_ERR "microcode: failed to load file %s\n", fw_name); + pr_err("failed to load file %s\n", fw_name); goto out; } ret = UCODE_ERROR; if (*(u32 *)fw->data != UCODE_MAGIC) { - pr_err("Invalid UCODE_MAGIC (0x%08x)\n", *(u32 *)fw->data); + pr_err("invalid magic value (0x%08x)\n", *(u32 *)fw->data); goto fw_release; } -- cgit v1.2.3-18-g5258 From 22b7fcdae562b6792b3f5517e89fd7e0337180ae Mon Sep 17 00:00:00 2001 From: Torben Hohn Date: Thu, 27 Jan 2011 16:00:12 +0100 Subject: mn10300: Switch do_timer() to xtimer_update() Only one CPU gets the timer interrupt so mn10300_last_tsc does not need to be protected by xtime lock. Remove xtime lovking and use xtime_update() which does the locking itself. Signed-off-by: Torben Hohn Cc: David Howells Cc: Koichi Yasutake LKML-Reference: <20110127150011.23248.62040.stgit@localhost> Signed-off-by: Thomas Gleixner --- arch/mn10300/kernel/time.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/mn10300/kernel/time.c b/arch/mn10300/kernel/time.c index 75da468090b..5b955000626 100644 --- a/arch/mn10300/kernel/time.c +++ b/arch/mn10300/kernel/time.c @@ -104,8 +104,6 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id) unsigned tsc, elapse; irqreturn_t ret; - write_seqlock(&xtime_lock); - while (tsc = get_cycles(), elapse = tsc - mn10300_last_tsc, /* time elapsed since last * tick */ @@ -114,11 +112,9 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id) mn10300_last_tsc += MN10300_TSC_PER_HZ; /* advance the kernel's time tracking system */ - do_timer(1); + xtime_update(1); } - write_sequnlock(&xtime_lock); - ret = local_timer_interrupt(); #ifdef CONFIG_SMP send_IPI_allbutself(LOCAL_TIMER_IPI); -- cgit v1.2.3-18-g5258 From 893a5ab6ee7d51b231ed45aa844f8088642cb6bf Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Fri, 14 Jan 2011 16:45:01 +0100 Subject: KVM: SVM: Make sure KERNEL_GS_BASE is valid when loading gs_index The gs_index loading code uses the swapgs instruction to switch to the user gs_base temporarily. This is unsave in an lightweight exit-path in KVM on AMD because the KERNEL_GS_BASE MSR is switches lazily. An NMI happening in the critical path of load_gs_index may use the wrong GS_BASE value then leading to unpredictable behavior, e.g. a triple-fault. This patch fixes the issue by making sure that load_gs_index is called only with a valid KERNEL_GS_BASE value loaded in KVM. Signed-off-by: Joerg Roedel Signed-off-by: Avi Kivity --- arch/x86/kvm/svm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index 25bd1bc5aad..54ce246a383 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -1150,8 +1150,8 @@ static void svm_vcpu_put(struct kvm_vcpu *vcpu) kvm_load_ldt(svm->host.ldt); #ifdef CONFIG_X86_64 loadsegment(fs, svm->host.fs); - load_gs_index(svm->host.gs); wrmsrl(MSR_KERNEL_GS_BASE, current->thread.gs); + load_gs_index(svm->host.gs); #else loadsegment(gs, svm->host.gs); #endif -- cgit v1.2.3-18-g5258 From 8e1964a98920100f113ad26f78220ea706dbfa2b Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Thu, 20 Jan 2011 12:54:18 -0600 Subject: [PARISC] fix vmap flush/invalidate On parisc, we never implemented invalidate_kernel_vmap_range() because it was unnecessary for the xfs use case. However, we do need to implement an invalidate for the opposite use case (which occurred in a recent NFS change) where the user wants to read through the vmap range and write via the kernel address. There's an additional complexity to this in that if the page has no userspace mappings, it might have dirty cache lines in the kernel (indicated by the PG_dcache_dirty bit). In order to get full coherency, we need to flush these pages through the kernel mapping before invalidating the vmap range. Signed-off-by: James Bottomley --- arch/parisc/include/asm/cacheflush.h | 24 +++++++++++++++++------- 1 file changed, 17 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/parisc/include/asm/cacheflush.h b/arch/parisc/include/asm/cacheflush.h index f388a85bba1..7344e1d304a 100644 --- a/arch/parisc/include/asm/cacheflush.h +++ b/arch/parisc/include/asm/cacheflush.h @@ -37,6 +37,13 @@ void flush_cache_all_local(void); void flush_cache_all(void); void flush_cache_mm(struct mm_struct *mm); +#define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE +void flush_kernel_dcache_page_addr(void *addr); +static inline void flush_kernel_dcache_page(struct page *page) +{ + flush_kernel_dcache_page_addr(page_address(page)); +} + #define flush_kernel_dcache_range(start,size) \ flush_kernel_dcache_range_asm((start), (start)+(size)); /* vmap range flushes and invalidates. Architecturally, we don't need @@ -50,6 +57,16 @@ static inline void flush_kernel_vmap_range(void *vaddr, int size) } static inline void invalidate_kernel_vmap_range(void *vaddr, int size) { + unsigned long start = (unsigned long)vaddr; + void *cursor = vaddr; + + for ( ; cursor < vaddr + size; cursor += PAGE_SIZE) { + struct page *page = vmalloc_to_page(cursor); + + if (test_and_clear_bit(PG_dcache_dirty, &page->flags)) + flush_kernel_dcache_page(page); + } + flush_kernel_dcache_range_asm(start, start + size); } #define flush_cache_vmap(start, end) flush_cache_all() @@ -98,13 +115,6 @@ flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned long vma flush_user_dcache_page(vmaddr); } -#define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE -void flush_kernel_dcache_page_addr(void *addr); -static inline void flush_kernel_dcache_page(struct page *page) -{ - flush_kernel_dcache_page_addr(page_address(page)); -} - #ifdef CONFIG_DEBUG_RODATA void mark_rodata_ro(void); #endif -- cgit v1.2.3-18-g5258 From 15490ef8ff8fd22d677cb5d4f6a98e5a79118dba Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 9 Feb 2011 16:33:46 +0000 Subject: ARM: Avoid building unsafe kernels on OMAP2 and MX3 OMAP2 (armv6) and MX3 turn off support for the V6K instructions, which when they include support for SMP kernels means that the resulting kernel is unsafe on SMP and can result in corrupted filesystems as we end up using unsafe bitops. Re-enable the use of V6K instructions on such kernels, and let such kernels running on V6 CPUs eat undefined instruction faults which will be much safer than filesystem corruption. Next merge window we can fix this properly (as it requires a much bigger set of changes.) Acked-by: Tony Lindgren Signed-off-by: Russell King --- arch/arm/mm/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 9d30c6f804b..c9d2d56fece 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -405,7 +405,7 @@ config CPU_V6 config CPU_32v6K bool "Support ARM V6K processor extensions" if !SMP depends on CPU_V6 || CPU_V7 - default y if SMP && !(ARCH_MX3 || ARCH_OMAP2) + default y if SMP help Say Y here if your ARMv6 processor supports the 'K' extension. This enables the kernel to use some instructions not present @@ -416,7 +416,7 @@ config CPU_32v6K # ARMv7 config CPU_V7 bool "Support ARM V7 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX - select CPU_32v6K if !ARCH_OMAP2 + select CPU_32v6K select CPU_32v7 select CPU_ABRT_EV7 select CPU_PABRT_V7 -- cgit v1.2.3-18-g5258 From 9804c9eaeacfe78651052c5ddff31099f60ef78c Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 7 Feb 2011 19:28:01 +0100 Subject: [PARISC] fix per-cpu flag problem in the cpu affinity checkers The CHECK_IRQ_PER_CPU is wrong, it should be checking irq_to_desc(irq)->status not just irq. Signed-off-by: Thomas Gleixner Cc: stable@kernel.org Signed-off-by: James Bottomley --- arch/parisc/kernel/irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c index d7d94b845dc..3948f1dd455 100644 --- a/arch/parisc/kernel/irq.c +++ b/arch/parisc/kernel/irq.c @@ -108,7 +108,7 @@ int cpu_check_affinity(unsigned int irq, const struct cpumask *dest) int cpu_dest; /* timer and ipi have to always be received on all CPUs */ - if (CHECK_IRQ_PER_CPU(irq)) { + if (CHECK_IRQ_PER_CPU(irq_to_desc(irq)->status)) { /* Bad linux design decision. The mask has already * been set; we must reset it */ cpumask_setall(irq_desc[irq].affinity); -- cgit v1.2.3-18-g5258 From 29ab3c77c6ec6b4147f9bed75c2f4ed6f73b1bb8 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Wed, 9 Feb 2011 21:40:07 +0100 Subject: ARM: omap1/nokia770: mark some functions __init MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit These are only called from omap_nokia770_init which is in .init.text, too. Signed-off-by: Uwe Kleine-König Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-nokia770.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index d21f09dc78f..cfd08492614 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -115,7 +115,7 @@ static struct mipid_platform_data nokia770_mipid_platform_data = { .shutdown = mipid_shutdown, }; -static void mipid_dev_init(void) +static void __init mipid_dev_init(void) { const struct omap_lcd_config *conf; @@ -126,7 +126,7 @@ static void mipid_dev_init(void) } } -static void ads7846_dev_init(void) +static void __init ads7846_dev_init(void) { if (gpio_request(ADS7846_PENDOWN_GPIO, "ADS7846 pendown") < 0) printk(KERN_ERR "can't get ads7846 pen down GPIO\n"); @@ -170,7 +170,7 @@ static struct hwa742_platform_data nokia770_hwa742_platform_data = { .te_connected = 1, }; -static void hwa742_dev_init(void) +static void __init hwa742_dev_init(void) { clk_add_alias("hwa_sys_ck", NULL, "bclk", NULL); omapfb_set_ctrl_platform_data(&nokia770_hwa742_platform_data); -- cgit v1.2.3-18-g5258 From 2354f64a24924f87ed74f6ff1a38be4b05938c04 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Wed, 9 Feb 2011 21:40:08 +0100 Subject: ARM: omap: move omap_get_config et al. to .init.text MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit All callers of these functions live in .init.text, so these can go there, too. There they must not be exported anymore, this is no problem though, as all callers are always built-in. Signed-off-by: Uwe Kleine-König Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/common.c | 6 ++---- arch/arm/plat-omap/include/plat/board.h | 4 ++-- 2 files changed, 4 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index f0473182030..30c698e7a02 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -49,17 +49,15 @@ static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out) return kinfo->data; } -const void *__omap_get_config(u16 tag, size_t len, int nr) +const void *__init __omap_get_config(u16 tag, size_t len, int nr) { return get_config(tag, len, nr, NULL); } -EXPORT_SYMBOL(__omap_get_config); -const void *omap_get_var_config(u16 tag, size_t *len) +const void *__init omap_get_var_config(u16 tag, size_t *len) { return get_config(tag, NO_LENGTH_CHECK, 0, len); } -EXPORT_SYMBOL(omap_get_var_config); void __init omap_reserve(void) { diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h index 3cf4fa25ab3..97126dfd288 100644 --- a/arch/arm/plat-omap/include/plat/board.h +++ b/arch/arm/plat-omap/include/plat/board.h @@ -151,14 +151,14 @@ struct omap_board_config_kernel { const void *data; }; -extern const void *__omap_get_config(u16 tag, size_t len, int nr); +extern const void *__init __omap_get_config(u16 tag, size_t len, int nr); #define omap_get_config(tag, type) \ ((const type *) __omap_get_config((tag), sizeof(type), 0)) #define omap_get_nr_config(tag, type, nr) \ ((const type *) __omap_get_config((tag), sizeof(type), (nr))) -extern const void *omap_get_var_config(u16 tag, size_t *len); +extern const void *__init omap_get_var_config(u16 tag, size_t *len); extern struct omap_board_config_kernel *omap_board_config; extern int omap_board_config_size; -- cgit v1.2.3-18-g5258 From 119c4c2cce34a07c98f0166ad679135bb62621ec Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Wed, 9 Feb 2011 21:40:09 +0100 Subject: ARM: omap: move omap_board_config_kernel to .init.data MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This variable is only assigned in __init functions and never used later. Signed-off-by: Uwe Kleine-König Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/common.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 30c698e7a02..d9f10a31e60 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -24,10 +24,11 @@ #define NO_LENGTH_CHECK 0xffffffff -struct omap_board_config_kernel *omap_board_config; +struct omap_board_config_kernel *omap_board_config __initdata; int omap_board_config_size; -static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out) +static const void *__init get_config(u16 tag, size_t len, + int skip, size_t *len_out) { struct omap_board_config_kernel *kinfo = NULL; int i; -- cgit v1.2.3-18-g5258 From a7e2a89abb8387a377f3bf6d483d0938b5735854 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Wed, 9 Feb 2011 21:40:10 +0100 Subject: wip: fix section mismatches in omap1_defconfig MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit after these changes omap1_defconfig and omap2plus_defconfig don't have any section mismatches any more, making it plausible that the patches earlier in this series are OK. Signed-off-by: Uwe Kleine-König Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-ams-delta.c | 4 ++-- arch/arm/mach-omap1/board-fsample.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 2f446a2658a..de88c9297b6 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -175,7 +175,7 @@ static struct omap_usb_config ams_delta_usb_config __initdata = { .pins[0] = 2, }; -static struct omap_board_config_kernel ams_delta_config[] = { +static struct omap_board_config_kernel ams_delta_config[] __initdata = { { OMAP_TAG_LCD, &ams_delta_lcd_config }, }; @@ -259,7 +259,7 @@ static int ams_delta_camera_power(struct device *dev, int power) #define ams_delta_camera_power NULL #endif -static struct soc_camera_link ams_delta_iclink __initdata = { +static struct soc_camera_link ams_delta_iclink = { .bus_id = 0, /* OMAP1 SoC camera bus */ .i2c_adapter_id = 1, .board_info = &ams_delta_camera_board_info[0], diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 27fb1be0f20..87f173d9355 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -291,7 +291,7 @@ static struct omap_lcd_config fsample_lcd_config = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel fsample_config[] = { +static struct omap_board_config_kernel fsample_config[] __initdata = { { OMAP_TAG_LCD, &fsample_lcd_config }, }; -- cgit v1.2.3-18-g5258 From d377eb0d95e4a7333afeb5ca4ba8554160480263 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Fri, 6 Aug 2010 14:29:14 -0700 Subject: ARM: tegra: Centralize macros to define debug uart base Signed-off-by: Colin Cross --- arch/arm/mach-tegra/include/mach/debug-macro.S | 25 +++++-------------------- arch/arm/mach-tegra/include/mach/iomap.h | 14 ++++++++++++++ arch/arm/mach-tegra/include/mach/uncompress.h | 18 ++---------------- 3 files changed, 21 insertions(+), 36 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/include/mach/debug-macro.S b/arch/arm/mach-tegra/include/mach/debug-macro.S index a0e7c12868b..e0ebe65c165 100644 --- a/arch/arm/mach-tegra/include/mach/debug-macro.S +++ b/arch/arm/mach-tegra/include/mach/debug-macro.S @@ -19,30 +19,15 @@ */ #include +#include .macro addruart, rp, rv ldr \rp, =IO_APB_PHYS @ physical ldr \rv, =IO_APB_VIRT @ virtual -#if defined(CONFIG_TEGRA_DEBUG_UART_NONE) -#error "A debug UART must be selected in the kernel config to use DEBUG_LL" -#elif defined(CONFIG_TEGRA_DEBUG_UARTA) - orr \rp, \rp, #0x6000 - orr \rv, \rv, #0x6000 -#elif defined(CONFIG_TEGRA_DEBUG_UARTB) - orr \rp, \rp, #0x6000 - orr \rp, \rp, #0x40 - orr \rv, \rv, #0x6000 - orr \rv, \rv, #0x40 -#elif defined(CONFIG_TEGRA_DEBUG_UARTC) - orr \rp, \rp, #0x6200 - orr \rv, \rv, #0x6200 -#elif defined(CONFIG_TEGRA_DEBUG_UARTD) - orr \rp, \rp, #0x6300 - orr \rv, \rv, #0x6300 -#elif defined(CONFIG_TEGRA_DEBUG_UARTE) - orr \rp, \rp, #0x6400 - orr \rv, \rv, #0x6400 -#endif + orr \rp, \rp, #(TEGRA_DEBUG_UART_BASE & 0xFF) + orr \rp, \rp, #(TEGRA_DEBUG_UART_BASE & 0xFF00) + orr \rv, \rv, #(TEGRA_DEBUG_UART_BASE & 0xFF) + orr \rv, \rv, #(TEGRA_DEBUG_UART_BASE & 0xFF00) .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-tegra/include/mach/iomap.h b/arch/arm/mach-tegra/include/mach/iomap.h index 44a4f4bcf91..325eca37348 100644 --- a/arch/arm/mach-tegra/include/mach/iomap.h +++ b/arch/arm/mach-tegra/include/mach/iomap.h @@ -221,4 +221,18 @@ #define TEGRA_SDMMC4_BASE 0xC8000600 #define TEGRA_SDMMC4_SIZE SZ_512 +#if defined(CONFIG_TEGRA_DEBUG_UART_NONE) +# define TEGRA_DEBUG_UART_BASE 0 +#elif defined(CONFIG_TEGRA_DEBUG_UARTA) +# define TEGRA_DEBUG_UART_BASE TEGRA_UARTA_BASE +#elif defined(CONFIG_TEGRA_DEBUG_UARTB) +# define TEGRA_DEBUG_UART_BASE TEGRA_UARTB_BASE +#elif defined(CONFIG_TEGRA_DEBUG_UARTC) +# define TEGRA_DEBUG_UART_BASE TEGRA_UARTC_BASE +#elif defined(CONFIG_TEGRA_DEBUG_UARTD) +# define TEGRA_DEBUG_UART_BASE TEGRA_UARTD_BASE +#elif defined(CONFIG_TEGRA_DEBUG_UARTE) +# define TEGRA_DEBUG_UART_BASE TEGRA_UARTE_BASE +#endif + #endif diff --git a/arch/arm/mach-tegra/include/mach/uncompress.h b/arch/arm/mach-tegra/include/mach/uncompress.h index 6c4dd815abd..4e8323770c7 100644 --- a/arch/arm/mach-tegra/include/mach/uncompress.h +++ b/arch/arm/mach-tegra/include/mach/uncompress.h @@ -26,23 +26,9 @@ #include -#if defined(CONFIG_TEGRA_DEBUG_UARTA) -#define DEBUG_UART_BASE TEGRA_UARTA_BASE -#elif defined(CONFIG_TEGRA_DEBUG_UARTB) -#define DEBUG_UART_BASE TEGRA_UARTB_BASE -#elif defined(CONFIG_TEGRA_DEBUG_UARTC) -#define DEBUG_UART_BASE TEGRA_UARTC_BASE -#elif defined(CONFIG_TEGRA_DEBUG_UARTD) -#define DEBUG_UART_BASE TEGRA_UARTD_BASE -#elif defined(CONFIG_TEGRA_DEBUG_UARTE) -#define DEBUG_UART_BASE TEGRA_UARTE_BASE -#else -#define DEBUG_UART_BASE NULL -#endif - static void putc(int c) { - volatile u8 *uart = (volatile u8 *)DEBUG_UART_BASE; + volatile u8 *uart = (volatile u8 *)TEGRA_DEBUG_UART_BASE; int shift = 2; if (uart == NULL) @@ -59,7 +45,7 @@ static inline void flush(void) static inline void arch_decomp_setup(void) { - volatile u8 *uart = (volatile u8 *)DEBUG_UART_BASE; + volatile u8 *uart = (volatile u8 *)TEGRA_DEBUG_UART_BASE; int shift = 2; if (uart == NULL) -- cgit v1.2.3-18-g5258 From ce1e32626951957729d5a1bbe3fa7e5d734df6c0 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Mon, 24 May 2010 17:07:46 -0700 Subject: ARM: tegra: Add api to control internal powergating Signed-off-by: Colin Cross --- arch/arm/mach-tegra/Makefile | 1 + arch/arm/mach-tegra/include/mach/powergate.h | 40 +++++ arch/arm/mach-tegra/powergate.c | 212 +++++++++++++++++++++++++++ 3 files changed, 253 insertions(+) create mode 100644 arch/arm/mach-tegra/include/mach/powergate.h create mode 100644 arch/arm/mach-tegra/powergate.c (limited to 'arch') diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index cdbc68e4c0c..00a6ba348d9 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -5,6 +5,7 @@ obj-y += clock.o obj-y += timer.o obj-y += gpio.o obj-y += pinmux.o +obj-y += powergate.o obj-y += fuse.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += clock.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_clocks.o diff --git a/arch/arm/mach-tegra/include/mach/powergate.h b/arch/arm/mach-tegra/include/mach/powergate.h new file mode 100644 index 00000000000..401d1b72529 --- /dev/null +++ b/arch/arm/mach-tegra/include/mach/powergate.h @@ -0,0 +1,40 @@ +/* + * drivers/regulator/tegra-regulator.c + * + * Copyright (c) 2010 Google, Inc + * + * Author: + * Colin Cross + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef _MACH_TEGRA_POWERGATE_H_ +#define _MACH_TEGRA_POWERGATE_H_ + +#define TEGRA_POWERGATE_CPU 0 +#define TEGRA_POWERGATE_3D 1 +#define TEGRA_POWERGATE_VENC 2 +#define TEGRA_POWERGATE_PCIE 3 +#define TEGRA_POWERGATE_VDEC 4 +#define TEGRA_POWERGATE_L2 5 +#define TEGRA_POWERGATE_MPE 6 +#define TEGRA_NUM_POWERGATE 7 + +int tegra_powergate_power_on(int id); +int tegra_powergate_power_off(int id); +bool tegra_powergate_is_powered(int id); +int tegra_powergate_remove_clamping(int id); + +/* Must be called with clk disabled, and returns with clk enabled */ +int tegra_powergate_sequence_power_up(int id, struct clk *clk); + +#endif /* _MACH_TEGRA_POWERGATE_H_ */ diff --git a/arch/arm/mach-tegra/powergate.c b/arch/arm/mach-tegra/powergate.c new file mode 100644 index 00000000000..3cee9aa1f2c --- /dev/null +++ b/arch/arm/mach-tegra/powergate.c @@ -0,0 +1,212 @@ +/* + * drivers/powergate/tegra-powergate.c + * + * Copyright (c) 2010 Google, Inc + * + * Author: + * Colin Cross + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define PWRGATE_TOGGLE 0x30 +#define PWRGATE_TOGGLE_START (1 << 8) + +#define REMOVE_CLAMPING 0x34 + +#define PWRGATE_STATUS 0x38 + +static DEFINE_SPINLOCK(tegra_powergate_lock); + +static void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE); + +static u32 pmc_read(unsigned long reg) +{ + return readl(pmc + reg); +} + +static void pmc_write(u32 val, unsigned long reg) +{ + writel(val, pmc + reg); +} + +static int tegra_powergate_set(int id, bool new_state) +{ + bool status; + unsigned long flags; + + spin_lock_irqsave(&tegra_powergate_lock, flags); + + status = pmc_read(PWRGATE_STATUS) & (1 << id); + + if (status == new_state) { + spin_unlock_irqrestore(&tegra_powergate_lock, flags); + return -EINVAL; + } + + pmc_write(PWRGATE_TOGGLE_START | id, PWRGATE_TOGGLE); + + spin_unlock_irqrestore(&tegra_powergate_lock, flags); + + return 0; +} + +int tegra_powergate_power_on(int id) +{ + if (id < 0 || id >= TEGRA_NUM_POWERGATE) + return -EINVAL; + + return tegra_powergate_set(id, true); +} + +int tegra_powergate_power_off(int id) +{ + if (id < 0 || id >= TEGRA_NUM_POWERGATE) + return -EINVAL; + + return tegra_powergate_set(id, false); +} + +bool tegra_powergate_is_powered(int id) +{ + u32 status; + + if (id < 0 || id >= TEGRA_NUM_POWERGATE) + return -EINVAL; + + status = pmc_read(PWRGATE_STATUS) & (1 << id); + return !!status; +} + +int tegra_powergate_remove_clamping(int id) +{ + u32 mask; + + if (id < 0 || id >= TEGRA_NUM_POWERGATE) + return -EINVAL; + + /* + * Tegra 2 has a bug where PCIE and VDE clamping masks are + * swapped relatively to the partition ids + */ + if (id == TEGRA_POWERGATE_VDEC) + mask = (1 << TEGRA_POWERGATE_PCIE); + else if (id == TEGRA_POWERGATE_PCIE) + mask = (1 << TEGRA_POWERGATE_VDEC); + else + mask = (1 << id); + + pmc_write(mask, REMOVE_CLAMPING); + + return 0; +} + +/* Must be called with clk disabled, and returns with clk enabled */ +int tegra_powergate_sequence_power_up(int id, struct clk *clk) +{ + int ret; + + tegra_periph_reset_assert(clk); + + ret = tegra_powergate_power_on(id); + if (ret) + goto err_power; + + ret = clk_enable(clk); + if (ret) + goto err_clk; + + udelay(10); + + ret = tegra_powergate_remove_clamping(id); + if (ret) + goto err_clamp; + + udelay(10); + tegra_periph_reset_deassert(clk); + + return 0; + +err_clamp: + clk_disable(clk); +err_clk: + tegra_powergate_power_off(id); +err_power: + return ret; +} + +#ifdef CONFIG_DEBUG_FS + +static const char * const powergate_name[] = { + [TEGRA_POWERGATE_CPU] = "cpu", + [TEGRA_POWERGATE_3D] = "3d", + [TEGRA_POWERGATE_VENC] = "venc", + [TEGRA_POWERGATE_VDEC] = "vdec", + [TEGRA_POWERGATE_PCIE] = "pcie", + [TEGRA_POWERGATE_L2] = "l2", + [TEGRA_POWERGATE_MPE] = "mpe", +}; + +static int powergate_show(struct seq_file *s, void *data) +{ + int i; + + seq_printf(s, " powergate powered\n"); + seq_printf(s, "------------------\n"); + + for (i = 0; i < TEGRA_NUM_POWERGATE; i++) + seq_printf(s, " %9s %7s\n", powergate_name[i], + tegra_powergate_is_powered(i) ? "yes" : "no"); + return 0; +} + +static int powergate_open(struct inode *inode, struct file *file) +{ + return single_open(file, powergate_show, inode->i_private); +} + +static const struct file_operations powergate_fops = { + .open = powergate_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int __init powergate_debugfs_init(void) +{ + struct dentry *d; + int err = -ENOMEM; + + d = debugfs_create_file("powergate", S_IRUGO, NULL, NULL, + &powergate_fops); + if (!d) + return -ENOMEM; + + return err; +} + +late_initcall(powergate_debugfs_init); + +#endif -- cgit v1.2.3-18-g5258 From 538bd3cc196f55b02614b3b19c48656251464b74 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Sun, 3 Oct 2010 21:24:28 -0700 Subject: ARM: tegra: irqs: Update irq list Fixes typo in INT_CPU1_PMU_INTR (original fix from Will Deacon) Adds board irqs Signed-off-by: Colin Cross --- arch/arm/mach-tegra/include/mach/irqs.h | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/include/mach/irqs.h b/arch/arm/mach-tegra/include/mach/irqs.h index 71bbf342295..73265af4dda 100644 --- a/arch/arm/mach-tegra/include/mach/irqs.h +++ b/arch/arm/mach-tegra/include/mach/irqs.h @@ -88,7 +88,7 @@ #define INT_SYS_STATS_MON (INT_SEC_BASE + 22) #define INT_GPIO5 (INT_SEC_BASE + 23) #define INT_CPU0_PMU_INTR (INT_SEC_BASE + 24) -#define INT_CPU2_PMU_INTR (INT_SEC_BASE + 25) +#define INT_CPU1_PMU_INTR (INT_SEC_BASE + 25) #define INT_SEC_RES_26 (INT_SEC_BASE + 26) #define INT_S_LINK1 (INT_SEC_BASE + 27) #define INT_APB_DMA_COP (INT_SEC_BASE + 28) @@ -166,10 +166,18 @@ #define INT_QUAD_RES_30 (INT_QUAD_BASE + 30) #define INT_QUAD_RES_31 (INT_QUAD_BASE + 31) -#define INT_GPIO_BASE (INT_QUAD_BASE + 32) +#define INT_MAIN_NR (INT_QUAD_BASE + 32 - INT_PRI_BASE) + +#define INT_GPIO_BASE (INT_PRI_BASE + INT_MAIN_NR) + #define INT_GPIO_NR (28 * 8) -#define NR_IRQS (INT_GPIO_BASE + INT_GPIO_NR) +#define TEGRA_NR_IRQS (INT_GPIO_BASE + INT_GPIO_NR) + +#define INT_BOARD_BASE TEGRA_NR_IRQS +#define NR_BOARD_IRQS 32 + +#define NR_IRQS (INT_BOARD_BASE + NR_BOARD_IRQS) #endif #endif -- cgit v1.2.3-18-g5258 From 2ea67fd145397c1409ffc85b2210ccf7ef69a183 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Mon, 4 Oct 2010 08:49:49 -0700 Subject: ARM: tegra: Add prototypes for subsystem suspend functions Signed-off-by: Colin Cross --- arch/arm/mach-tegra/dma.c | 1 + arch/arm/mach-tegra/gpio.c | 1 + arch/arm/mach-tegra/include/mach/suspend.h | 38 ++++++++++++++++++++++++++++++ arch/arm/mach-tegra/irq.c | 1 + arch/arm/mach-tegra/pinmux-t2-tables.c | 1 + arch/arm/mach-tegra/tegra2_clocks.c | 1 + arch/arm/mach-tegra/timer.c | 1 + 7 files changed, 44 insertions(+) create mode 100644 arch/arm/mach-tegra/include/mach/suspend.h (limited to 'arch') diff --git a/arch/arm/mach-tegra/dma.c b/arch/arm/mach-tegra/dma.c index edda6ec5e92..a2a252db024 100644 --- a/arch/arm/mach-tegra/dma.c +++ b/arch/arm/mach-tegra/dma.c @@ -30,6 +30,7 @@ #include #include #include +#include #define APB_DMA_GEN 0x000 #define GEN_ENABLE (1<<31) diff --git a/arch/arm/mach-tegra/gpio.c b/arch/arm/mach-tegra/gpio.c index ad804880151..132dcd6833a 100644 --- a/arch/arm/mach-tegra/gpio.c +++ b/arch/arm/mach-tegra/gpio.c @@ -25,6 +25,7 @@ #include #include +#include #define GPIO_BANK(x) ((x) >> 5) #define GPIO_PORT(x) (((x) >> 3) & 0x3) diff --git a/arch/arm/mach-tegra/include/mach/suspend.h b/arch/arm/mach-tegra/include/mach/suspend.h new file mode 100644 index 00000000000..5af8715d2e1 --- /dev/null +++ b/arch/arm/mach-tegra/include/mach/suspend.h @@ -0,0 +1,38 @@ +/* + * arch/arm/mach-tegra/include/mach/suspend.h + * + * Copyright (C) 2010 Google, Inc. + * + * Author: + * Colin Cross + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + + +#ifndef _MACH_TEGRA_SUSPEND_H_ +#define _MACH_TEGRA_SUSPEND_H_ + +void tegra_pinmux_suspend(void); +void tegra_irq_suspend(void); +void tegra_gpio_suspend(void); +void tegra_clk_suspend(void); +void tegra_dma_suspend(void); +void tegra_timer_suspend(void); + +void tegra_pinmux_resume(void); +void tegra_irq_resume(void); +void tegra_gpio_resume(void); +void tegra_clk_resume(void); +void tegra_dma_resume(void); +void tegra_timer_resume(void); + +#endif /* _MACH_TEGRA_SUSPEND_H_ */ diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c index 17c74d21077..5f065f9fdf5 100644 --- a/arch/arm/mach-tegra/irq.c +++ b/arch/arm/mach-tegra/irq.c @@ -26,6 +26,7 @@ #include #include +#include #include "board.h" diff --git a/arch/arm/mach-tegra/pinmux-t2-tables.c b/arch/arm/mach-tegra/pinmux-t2-tables.c index a6ea34e782d..4d97d5c86ac 100644 --- a/arch/arm/mach-tegra/pinmux-t2-tables.c +++ b/arch/arm/mach-tegra/pinmux-t2-tables.c @@ -29,6 +29,7 @@ #include #include +#include #define DRIVE_PINGROUP(pg_name, r) \ [TEGRA_DRIVE_PINGROUP_ ## pg_name] = { \ diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c index f0dae6d8ba5..2dd2b031a85 100644 --- a/arch/arm/mach-tegra/tegra2_clocks.c +++ b/arch/arm/mach-tegra/tegra2_clocks.c @@ -27,6 +27,7 @@ #include #include +#include #include "clock.h" #include "fuse.h" diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c index 7b8ad1f98f4..36b53a7294c 100644 --- a/arch/arm/mach-tegra/timer.c +++ b/arch/arm/mach-tegra/timer.c @@ -33,6 +33,7 @@ #include #include +#include #include "board.h" #include "clock.h" -- cgit v1.2.3-18-g5258 From cea62c878dd8b73b67fb3e38f989e9d3241d5934 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Mon, 4 Oct 2010 11:49:26 -0700 Subject: ARM: tegra: clock: Suspend fixes, and add new clocks Save and restore pll and osc state during suspend Add digital audio clocks Update clk dev associations Correct max clock frequencies Add pll_p as additional cpu clock state Add values to plld table Fix register offset for sdmmc4 clock Add blink timer to tegra2_clocks Signed-off-by: Colin Cross --- arch/arm/mach-tegra/tegra2_clocks.c | 263 +++++++++++++++++++++++++++++++++--- 1 file changed, 244 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c index 2dd2b031a85..7a2926ae2fd 100644 --- a/arch/arm/mach-tegra/tegra2_clocks.c +++ b/arch/arm/mach-tegra/tegra2_clocks.c @@ -52,7 +52,7 @@ #define OSC_CTRL_OSC_FREQ_19_2MHZ (1<<30) #define OSC_CTRL_OSC_FREQ_12MHZ (2<<30) #define OSC_CTRL_OSC_FREQ_26MHZ (3<<30) -#define OSC_CTRL_MASK 0x3f2 +#define OSC_CTRL_MASK (0x3f2 | OSC_CTRL_OSC_FREQ_MASK) #define OSC_FREQ_DET 0x58 #define OSC_FREQ_DET_TRIG (1<<31) @@ -135,12 +135,29 @@ #define BUS_CLK_DISABLE (1<<3) #define BUS_CLK_DIV_MASK 0x3 +#define PMC_CTRL 0x0 + #define PMC_CTRL_BLINK_ENB (1 << 7) + +#define PMC_DPD_PADS_ORIDE 0x1c + #define PMC_DPD_PADS_ORIDE_BLINK_ENB (1 << 20) + +#define PMC_BLINK_TIMER_DATA_ON_SHIFT 0 +#define PMC_BLINK_TIMER_DATA_ON_MASK 0x7fff +#define PMC_BLINK_TIMER_ENB (1 << 15) +#define PMC_BLINK_TIMER_DATA_OFF_SHIFT 16 +#define PMC_BLINK_TIMER_DATA_OFF_MASK 0xffff + static void __iomem *reg_clk_base = IO_ADDRESS(TEGRA_CLK_RESET_BASE); +static void __iomem *reg_pmc_base = IO_ADDRESS(TEGRA_PMC_BASE); #define clk_writel(value, reg) \ __raw_writel(value, (u32)reg_clk_base + (reg)) #define clk_readl(reg) \ __raw_readl((u32)reg_clk_base + (reg)) +#define pmc_writel(value, reg) \ + __raw_writel(value, (u32)reg_pmc_base + (reg)) +#define pmc_readl(reg) \ + __raw_readl((u32)reg_pmc_base + (reg)) unsigned long clk_measure_input_freq(void) { @@ -358,6 +375,9 @@ static int tegra2_cpu_clk_set_rate(struct clk *c, unsigned long rate) return ret; } + if (rate == c->backup->rate) + goto out; + ret = clk_set_rate_locked(c->main, rate); if (ret) { pr_err("Failed to change cpu pll to %lu\n", rate); @@ -370,6 +390,7 @@ static int tegra2_cpu_clk_set_rate(struct clk *c, unsigned long rate) return ret; } +out: return 0; } @@ -429,6 +450,87 @@ static struct clk_ops tegra_bus_ops = { .set_rate = tegra2_bus_clk_set_rate, }; +/* Blink output functions */ + +static void tegra2_blink_clk_init(struct clk *c) +{ + u32 val; + + val = pmc_readl(PMC_CTRL); + c->state = (val & PMC_CTRL_BLINK_ENB) ? ON : OFF; + c->mul = 1; + val = pmc_readl(c->reg); + + if (val & PMC_BLINK_TIMER_ENB) { + unsigned int on_off; + + on_off = (val >> PMC_BLINK_TIMER_DATA_ON_SHIFT) & + PMC_BLINK_TIMER_DATA_ON_MASK; + val >>= PMC_BLINK_TIMER_DATA_OFF_SHIFT; + val &= PMC_BLINK_TIMER_DATA_OFF_MASK; + on_off += val; + /* each tick in the blink timer is 4 32KHz clocks */ + c->div = on_off * 4; + } else { + c->div = 1; + } +} + +static int tegra2_blink_clk_enable(struct clk *c) +{ + u32 val; + + val = pmc_readl(PMC_DPD_PADS_ORIDE); + pmc_writel(val | PMC_DPD_PADS_ORIDE_BLINK_ENB, PMC_DPD_PADS_ORIDE); + + val = pmc_readl(PMC_CTRL); + pmc_writel(val | PMC_CTRL_BLINK_ENB, PMC_CTRL); + + return 0; +} + +static void tegra2_blink_clk_disable(struct clk *c) +{ + u32 val; + + val = pmc_readl(PMC_CTRL); + pmc_writel(val & ~PMC_CTRL_BLINK_ENB, PMC_CTRL); + + val = pmc_readl(PMC_DPD_PADS_ORIDE); + pmc_writel(val & ~PMC_DPD_PADS_ORIDE_BLINK_ENB, PMC_DPD_PADS_ORIDE); +} + +static int tegra2_blink_clk_set_rate(struct clk *c, unsigned long rate) +{ + if (rate >= c->parent->rate) { + c->div = 1; + pmc_writel(0, c->reg); + } else { + unsigned int on_off; + u32 val; + + on_off = DIV_ROUND_UP(c->parent->rate / 8, rate); + c->div = on_off * 8; + + val = (on_off & PMC_BLINK_TIMER_DATA_ON_MASK) << + PMC_BLINK_TIMER_DATA_ON_SHIFT; + on_off &= PMC_BLINK_TIMER_DATA_OFF_MASK; + on_off <<= PMC_BLINK_TIMER_DATA_OFF_SHIFT; + val |= on_off; + val |= PMC_BLINK_TIMER_ENB; + pmc_writel(val, c->reg); + } + + return 0; +} + +static struct clk_ops tegra_blink_clk_ops = { + .init = &tegra2_blink_clk_init, + .enable = &tegra2_blink_clk_enable, + .disable = &tegra2_blink_clk_disable, + .set_rate = &tegra2_blink_clk_set_rate, +}; + /* PLL Functions */ static int tegra2_pll_clk_wait_for_lock(struct clk *c) { @@ -929,6 +1031,7 @@ static struct clk_ops tegra_clk_double_ops = { .set_rate = &tegra2_clk_double_set_rate, }; +/* Audio sync clock ops */ static void tegra2_audio_sync_clk_init(struct clk *c) { int source; @@ -1007,6 +1110,37 @@ static struct clk_ops tegra_audio_sync_clk_ops = { .set_parent = tegra2_audio_sync_clk_set_parent, }; +/* cdev1 and cdev2 (dap_mclk1 and dap_mclk2) ops */ + +static void tegra2_cdev_clk_init(struct clk *c) +{ + /* We could un-tristate the cdev1 or cdev2 pingroup here; this is + * currently done in the pinmux code. */ + c->state = ON; + if (!(clk_readl(CLK_OUT_ENB + PERIPH_CLK_TO_ENB_REG(c)) & + PERIPH_CLK_TO_ENB_BIT(c))) + c->state = OFF; +} + +static int tegra2_cdev_clk_enable(struct clk *c) +{ + clk_writel(PERIPH_CLK_TO_ENB_BIT(c), + CLK_OUT_ENB_SET + PERIPH_CLK_TO_ENB_SET_REG(c)); + return 0; +} + +static void tegra2_cdev_clk_disable(struct clk *c) +{ + clk_writel(PERIPH_CLK_TO_ENB_BIT(c), + CLK_OUT_ENB_CLR + PERIPH_CLK_TO_ENB_SET_REG(c)); +} + +static struct clk_ops tegra_cdev_clk_ops = { + .init = &tegra2_cdev_clk_init, + .enable = &tegra2_cdev_clk_enable, + .disable = &tegra2_cdev_clk_disable, +}; + /* Clock definitions */ static struct clk tegra_clk_32k = { .name = "clk_32k", @@ -1227,10 +1361,21 @@ static struct clk tegra_pll_a_out0 = { }; static struct clk_pll_table tegra_pll_d_table[] = { + { 12000000, 216000000, 216, 12, 1, 4}, + { 13000000, 216000000, 216, 13, 1, 4}, + { 19200000, 216000000, 135, 12, 1, 3}, + { 26000000, 216000000, 216, 26, 1, 4}, + + { 12000000, 594000000, 594, 12, 1, 8}, + { 13000000, 594000000, 594, 13, 1, 8}, + { 19200000, 594000000, 495, 16, 1, 8}, + { 26000000, 594000000, 594, 26, 1, 8}, + { 12000000, 1000000000, 1000, 12, 1, 12}, { 13000000, 1000000000, 1000, 13, 1, 12}, { 19200000, 1000000000, 625, 12, 1, 8}, { 26000000, 1000000000, 1000, 26, 1, 12}, + { 0, 0, 0, 0, 0, 0 }, }; @@ -1372,6 +1517,24 @@ static struct clk tegra_clk_d = { .max_rate = 52000000, }; +/* dap_mclk1, belongs to the cdev1 pingroup. */ +static struct clk tegra_dev1_clk = { + .name = "clk_dev1", + .ops = &tegra_cdev_clk_ops, + .clk_num = 94, + .rate = 26000000, + .max_rate = 26000000, +}; + +/* dap_mclk2, belongs to the cdev2 pingroup. */ +static struct clk tegra_dev2_clk = { + .name = "clk_dev2", + .ops = &tegra_cdev_clk_ops, + .clk_num = 93, + .rate = 26000000, + .max_rate = 26000000, +}; + /* initialized before peripheral clocks */ static struct clk_mux_sel mux_audio_sync_clk[8+1]; static const struct audio_sources { @@ -1486,7 +1649,7 @@ static struct clk tegra_clk_virtual_cpu = { .name = "cpu", .parent = &tegra_clk_cclk, .main = &tegra_pll_x, - .backup = &tegra_clk_m, + .backup = &tegra_pll_p, .ops = &tegra_cpu_ops, .max_rate = 1000000000, .dvfs = &tegra_dvfs_virtual_cpu_dvfs, @@ -1512,6 +1675,14 @@ static struct clk tegra_clk_pclk = { .max_rate = 108000000, }; +static struct clk tegra_clk_blink = { + .name = "blink", + .parent = &tegra_clk_32k, + .reg = 0x40, + .ops = &tegra_blink_clk_ops, + .max_rate = 32768, +}; + static struct clk_mux_sel mux_pllm_pllc_pllp_plla[] = { { .input = &tegra_pll_m, .value = 0}, { .input = &tegra_pll_c, .value = 1}, @@ -1626,7 +1797,7 @@ struct clk tegra_periph_clks[] = { PERIPH_CLK("sdmmc1", "sdhci-tegra.0", NULL, 14, 0x150, 52000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* scales with voltage */ PERIPH_CLK("sdmmc2", "sdhci-tegra.1", NULL, 9, 0x154, 52000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* scales with voltage */ PERIPH_CLK("sdmmc3", "sdhci-tegra.2", NULL, 69, 0x1bc, 52000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* scales with voltage */ - PERIPH_CLK("sdmmc4", "sdhci-tegra.3", NULL, 15, 0x160, 52000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* scales with voltage */ + PERIPH_CLK("sdmmc4", "sdhci-tegra.3", NULL, 15, 0x164, 52000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* scales with voltage */ PERIPH_CLK("vde", "vde", NULL, 61, 0x1c8, 250000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* scales with voltage and process_id */ PERIPH_CLK("csite", "csite", NULL, 73, 0x1d4, 144000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* max rate ??? */ /* FIXME: what is la? */ @@ -1642,34 +1813,34 @@ struct clk tegra_periph_clks[] = { PERIPH_CLK("i2c2_i2c", "tegra-i2c.1", "i2c", 0, 0, 72000000, mux_pllp_out3, 0), PERIPH_CLK("i2c3_i2c", "tegra-i2c.2", "i2c", 0, 0, 72000000, mux_pllp_out3, 0), PERIPH_CLK("dvc_i2c", "tegra-i2c.3", "i2c", 0, 0, 72000000, mux_pllp_out3, 0), - PERIPH_CLK("uarta", "uart.0", NULL, 6, 0x178, 216000000, mux_pllp_pllc_pllm_clkm, MUX), - PERIPH_CLK("uartb", "uart.1", NULL, 7, 0x17c, 216000000, mux_pllp_pllc_pllm_clkm, MUX), - PERIPH_CLK("uartc", "uart.2", NULL, 55, 0x1a0, 216000000, mux_pllp_pllc_pllm_clkm, MUX), - PERIPH_CLK("uartd", "uart.3", NULL, 65, 0x1c0, 216000000, mux_pllp_pllc_pllm_clkm, MUX), - PERIPH_CLK("uarte", "uart.4", NULL, 66, 0x1c4, 216000000, mux_pllp_pllc_pllm_clkm, MUX), + PERIPH_CLK("uarta", "uart.0", NULL, 6, 0x178, 600000000, mux_pllp_pllc_pllm_clkm, MUX), + PERIPH_CLK("uartb", "uart.1", NULL, 7, 0x17c, 600000000, mux_pllp_pllc_pllm_clkm, MUX), + PERIPH_CLK("uartc", "uart.2", NULL, 55, 0x1a0, 600000000, mux_pllp_pllc_pllm_clkm, MUX), + PERIPH_CLK("uartd", "uart.3", NULL, 65, 0x1c0, 600000000, mux_pllp_pllc_pllm_clkm, MUX), + PERIPH_CLK("uarte", "uart.4", NULL, 66, 0x1c4, 600000000, mux_pllp_pllc_pllm_clkm, MUX), PERIPH_CLK("3d", "3d", NULL, 24, 0x158, 300000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | PERIPH_MANUAL_RESET), /* scales with voltage and process_id */ PERIPH_CLK("2d", "2d", NULL, 21, 0x15c, 300000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71), /* scales with voltage and process_id */ /* FIXME: vi and vi_sensor share an enable */ - PERIPH_CLK("vi", "vi", NULL, 20, 0x148, 150000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71), /* scales with voltage and process_id */ - PERIPH_CLK("vi_sensor", "vi_sensor", NULL, 20, 0x1a8, 150000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | PERIPH_NO_RESET), /* scales with voltage and process_id */ + PERIPH_CLK("vi", "tegra_camera", "vi", 20, 0x148, 150000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71), /* scales with voltage and process_id */ + PERIPH_CLK("vi_sensor", "tegra_camera", "vi_sensor", 20, 0x1a8, 150000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | PERIPH_NO_RESET), /* scales with voltage and process_id */ PERIPH_CLK("epp", "epp", NULL, 19, 0x16c, 300000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71), /* scales with voltage and process_id */ PERIPH_CLK("mpe", "mpe", NULL, 60, 0x170, 250000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71), /* scales with voltage and process_id */ PERIPH_CLK("host1x", "host1x", NULL, 28, 0x180, 166000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71), /* scales with voltage and process_id */ /* FIXME: cve and tvo share an enable */ PERIPH_CLK("cve", "cve", NULL, 49, 0x140, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* requires min voltage */ PERIPH_CLK("tvo", "tvo", NULL, 49, 0x188, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* requires min voltage */ - PERIPH_CLK("hdmi", "hdmi", NULL, 51, 0x18c, 148500000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* requires min voltage */ + PERIPH_CLK("hdmi", "hdmi", NULL, 51, 0x18c, 600000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* requires min voltage */ PERIPH_CLK("tvdac", "tvdac", NULL, 53, 0x194, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* requires min voltage */ - PERIPH_CLK("disp1", "tegrafb.0", NULL, 27, 0x138, 190000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* scales with voltage and process_id */ - PERIPH_CLK("disp2", "tegrafb.1", NULL, 26, 0x13c, 190000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* scales with voltage and process_id */ + PERIPH_CLK("disp1", "tegradc.0", NULL, 27, 0x138, 600000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* scales with voltage and process_id */ + PERIPH_CLK("disp2", "tegradc.1", NULL, 26, 0x13c, 600000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* scales with voltage and process_id */ PERIPH_CLK("usbd", "fsl-tegra-udc", NULL, 22, 0, 480000000, mux_clk_m, 0), /* requires min voltage */ PERIPH_CLK("usb2", "tegra-ehci.1", NULL, 58, 0, 480000000, mux_clk_m, 0), /* requires min voltage */ PERIPH_CLK("usb3", "tegra-ehci.2", NULL, 59, 0, 480000000, mux_clk_m, 0), /* requires min voltage */ PERIPH_CLK("emc", "emc", NULL, 57, 0x19c, 800000000, mux_pllm_pllc_pllp_clkm, MUX | DIV_U71 | PERIPH_EMC_ENB), PERIPH_CLK("dsi", "dsi", NULL, 48, 0, 500000000, mux_plld, 0), /* scales with voltage */ - PERIPH_CLK("csi", "csi", NULL, 52, 0, 72000000, mux_pllp_out3, 0), - PERIPH_CLK("isp", "isp", NULL, 23, 0, 150000000, mux_clk_m, 0), /* same frequency as VI */ - PERIPH_CLK("csus", "csus", NULL, 92, 0, 150000000, mux_clk_m, PERIPH_NO_RESET), + PERIPH_CLK("csi", "tegra_camera", "csi", 52, 0, 72000000, mux_pllp_out3, 0), + PERIPH_CLK("isp", "tegra_camera", "isp", 23, 0, 150000000, mux_clk_m, 0), /* same frequency as VI */ + PERIPH_CLK("csus", "tegra_camera", "csus", 92, 0, 150000000, mux_clk_m, PERIPH_NO_RESET), PERIPH_CLK("pex", NULL, "pex", 70, 0, 26000000, mux_clk_m, PERIPH_MANUAL_RESET), PERIPH_CLK("afi", NULL, "afi", 72, 0, 26000000, mux_clk_m, PERIPH_MANUAL_RESET), PERIPH_CLK("pcie_xclk", NULL, "pcie_xclk", 74, 0, 26000000, mux_clk_m, PERIPH_MANUAL_RESET), @@ -1694,9 +1865,15 @@ struct clk_duplicate tegra_clk_duplicates[] = { CLK_DUPLICATE("uartc", "tegra_uart.2", NULL), CLK_DUPLICATE("uartd", "tegra_uart.3", NULL), CLK_DUPLICATE("uarte", "tegra_uart.4", NULL), - CLK_DUPLICATE("host1x", "tegrafb.0", "host1x"), - CLK_DUPLICATE("host1x", "tegrafb.1", "host1x"), + CLK_DUPLICATE("usbd", "utmip-pad", NULL), CLK_DUPLICATE("usbd", "tegra-ehci.0", NULL), + CLK_DUPLICATE("usbd", "tegra-otg", NULL), + CLK_DUPLICATE("hdmi", "tegradc.0", "hdmi"), + CLK_DUPLICATE("hdmi", "tegradc.1", "hdmi"), + CLK_DUPLICATE("pwm", "tegra_pwm.0", NULL), + CLK_DUPLICATE("pwm", "tegra_pwm.1", NULL), + CLK_DUPLICATE("pwm", "tegra_pwm.2", NULL), + CLK_DUPLICATE("pwm", "tegra_pwm.3", NULL), }; #define CLK(dev, con, ck) \ @@ -1732,7 +1909,10 @@ struct clk_lookup tegra_clk_lookups[] = { CLK(NULL, "hclk", &tegra_clk_hclk), CLK(NULL, "pclk", &tegra_clk_pclk), CLK(NULL, "clk_d", &tegra_clk_d), + CLK(NULL, "clk_dev1", &tegra_dev1_clk), + CLK(NULL, "clk_dev2", &tegra_dev2_clk), CLK(NULL, "cpu", &tegra_clk_virtual_cpu), + CLK(NULL, "blink", &tegra_clk_blink), }; void __init tegra2_init_clocks(void) @@ -1775,14 +1955,34 @@ void __init tegra2_init_clocks(void) #ifdef CONFIG_PM static u32 clk_rst_suspend[RST_DEVICES_NUM + CLK_OUT_ENB_NUM + - PERIPH_CLK_SOURCE_NUM + 3]; + PERIPH_CLK_SOURCE_NUM + 19]; void tegra_clk_suspend(void) { unsigned long off, i; + u32 pllx_misc; u32 *ctx = clk_rst_suspend; *ctx++ = clk_readl(OSC_CTRL) & OSC_CTRL_MASK; + *ctx++ = clk_readl(tegra_pll_p.reg + PLL_BASE); + *ctx++ = clk_readl(tegra_pll_p.reg + PLL_MISC(&tegra_pll_p)); + *ctx++ = clk_readl(tegra_pll_c.reg + PLL_BASE); + *ctx++ = clk_readl(tegra_pll_c.reg + PLL_MISC(&tegra_pll_c)); + *ctx++ = clk_readl(tegra_pll_a.reg + PLL_BASE); + *ctx++ = clk_readl(tegra_pll_a.reg + PLL_MISC(&tegra_pll_a)); + + *ctx++ = clk_readl(tegra_pll_m_out1.reg); + *ctx++ = clk_readl(tegra_pll_p_out1.reg); + *ctx++ = clk_readl(tegra_pll_p_out3.reg); + *ctx++ = clk_readl(tegra_pll_a_out0.reg); + *ctx++ = clk_readl(tegra_pll_c_out1.reg); + + *ctx++ = clk_readl(tegra_clk_cclk.reg); + *ctx++ = clk_readl(tegra_clk_cclk.reg + SUPER_CLK_DIVIDER); + + *ctx++ = clk_readl(tegra_clk_sclk.reg); + *ctx++ = clk_readl(tegra_clk_sclk.reg + SUPER_CLK_DIVIDER); + *ctx++ = clk_readl(tegra_clk_pclk.reg); for (off = PERIPH_CLK_SOURCE_I2S1; off <= PERIPH_CLK_SOURCE_OSC; off += 4) { @@ -1801,6 +2001,10 @@ void tegra_clk_suspend(void) *ctx++ = clk_readl(MISC_CLK_ENB); *ctx++ = clk_readl(CLK_MASK_ARM); + + pllx_misc = clk_readl(tegra_pll_x.reg + PLL_MISC(&tegra_pll_x)); + pllx_misc &= ~PLL_MISC_LOCK_ENABLE(&tegra_pll_x); + clk_writel(pllx_misc, tegra_pll_x.reg + PLL_MISC(&tegra_pll_x)); } void tegra_clk_resume(void) @@ -1813,6 +2017,27 @@ void tegra_clk_resume(void) val |= *ctx++; clk_writel(val, OSC_CTRL); + clk_writel(*ctx++, tegra_pll_p.reg + PLL_BASE); + clk_writel(*ctx++, tegra_pll_p.reg + PLL_MISC(&tegra_pll_p)); + clk_writel(*ctx++, tegra_pll_c.reg + PLL_BASE); + clk_writel(*ctx++, tegra_pll_c.reg + PLL_MISC(&tegra_pll_c)); + clk_writel(*ctx++, tegra_pll_a.reg + PLL_BASE); + clk_writel(*ctx++, tegra_pll_a.reg + PLL_MISC(&tegra_pll_a)); + udelay(300); + + clk_writel(*ctx++, tegra_pll_m_out1.reg); + clk_writel(*ctx++, tegra_pll_p_out1.reg); + clk_writel(*ctx++, tegra_pll_p_out3.reg); + clk_writel(*ctx++, tegra_pll_a_out0.reg); + clk_writel(*ctx++, tegra_pll_c_out1.reg); + + clk_writel(*ctx++, tegra_clk_cclk.reg); + clk_writel(*ctx++, tegra_clk_cclk.reg + SUPER_CLK_DIVIDER); + + clk_writel(*ctx++, tegra_clk_sclk.reg); + clk_writel(*ctx++, tegra_clk_sclk.reg + SUPER_CLK_DIVIDER); + clk_writel(*ctx++, tegra_clk_pclk.reg); + /* enable all clocks before configuring clock sources */ clk_writel(0xbffffff9ul, CLK_OUT_ENB); clk_writel(0xfefffff7ul, CLK_OUT_ENB + 4); -- cgit v1.2.3-18-g5258 From 3c3895b4bf58d709ad4709480ceb2bb006741972 Mon Sep 17 00:00:00 2001 From: Gary King Date: Wed, 18 Aug 2010 00:19:58 -0700 Subject: ARM: tegra: pinmux: Add missing drive pingroups and fix suspend Adds missing drive pingroups, saves all drive pingroups in suspend, and restores the pinmux registers in the proper order. Signed-off-by: Gary King Signed-off-by: Colin Cross --- arch/arm/mach-tegra/include/mach/pinmux-t2.h | 10 ++++++++++ arch/arm/mach-tegra/pinmux-t2-tables.c | 25 +++++++++++++++++++++---- 2 files changed, 31 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/include/mach/pinmux-t2.h b/arch/arm/mach-tegra/include/mach/pinmux-t2.h index e5b9d740f97..4c262634726 100644 --- a/arch/arm/mach-tegra/include/mach/pinmux-t2.h +++ b/arch/arm/mach-tegra/include/mach/pinmux-t2.h @@ -167,6 +167,16 @@ enum tegra_drive_pingroup { TEGRA_DRIVE_PINGROUP_XM2D, TEGRA_DRIVE_PINGROUP_XM2CLK, TEGRA_DRIVE_PINGROUP_MEMCOMP, + TEGRA_DRIVE_PINGROUP_SDIO1, + TEGRA_DRIVE_PINGROUP_CRT, + TEGRA_DRIVE_PINGROUP_DDC, + TEGRA_DRIVE_PINGROUP_GMA, + TEGRA_DRIVE_PINGROUP_GMB, + TEGRA_DRIVE_PINGROUP_GMC, + TEGRA_DRIVE_PINGROUP_GMD, + TEGRA_DRIVE_PINGROUP_GME, + TEGRA_DRIVE_PINGROUP_OWR, + TEGRA_DRIVE_PINGROUP_UAD, TEGRA_MAX_DRIVE_PINGROUP, }; diff --git a/arch/arm/mach-tegra/pinmux-t2-tables.c b/arch/arm/mach-tegra/pinmux-t2-tables.c index 4d97d5c86ac..a475367befa 100644 --- a/arch/arm/mach-tegra/pinmux-t2-tables.c +++ b/arch/arm/mach-tegra/pinmux-t2-tables.c @@ -66,6 +66,16 @@ const struct tegra_drive_pingroup_desc tegra_soc_drive_pingroups[TEGRA_MAX_DRIVE DRIVE_PINGROUP(XM2D, 0x8cc), DRIVE_PINGROUP(XM2CLK, 0x8d0), DRIVE_PINGROUP(MEMCOMP, 0x8d4), + DRIVE_PINGROUP(SDIO1, 0x8e0), + DRIVE_PINGROUP(CRT, 0x8ec), + DRIVE_PINGROUP(DDC, 0x8f0), + DRIVE_PINGROUP(GMA, 0x8f4), + DRIVE_PINGROUP(GMB, 0x8f8), + DRIVE_PINGROUP(GMC, 0x8fc), + DRIVE_PINGROUP(GMD, 0x900), + DRIVE_PINGROUP(GME, 0x904), + DRIVE_PINGROUP(OWR, 0x908), + DRIVE_PINGROUP(UAD, 0x90c), }; #define PINGROUP(pg_name, vdd, f0, f1, f2, f3, f_safe, \ @@ -217,7 +227,8 @@ const struct tegra_pingroup_desc tegra_soc_pingroups[TEGRA_MAX_PINGROUP] = { #define PULLUPDOWN_REG_NUM 5 static u32 pinmux_reg[TRISTATE_REG_NUM + PIN_MUX_CTL_REG_NUM + - PULLUPDOWN_REG_NUM]; + PULLUPDOWN_REG_NUM + + ARRAY_SIZE(tegra_soc_drive_pingroups)]; static inline unsigned long pg_readl(unsigned long offset) { @@ -234,14 +245,17 @@ void tegra_pinmux_suspend(void) unsigned int i; u32 *ctx = pinmux_reg; - for (i = 0; i < TRISTATE_REG_NUM; i++) - *ctx++ = pg_readl(TRISTATE_REG_A + i*4); - for (i = 0; i < PIN_MUX_CTL_REG_NUM; i++) *ctx++ = pg_readl(PIN_MUX_CTL_REG_A + i*4); for (i = 0; i < PULLUPDOWN_REG_NUM; i++) *ctx++ = pg_readl(PULLUPDOWN_REG_A + i*4); + + for (i = 0; i < TRISTATE_REG_NUM; i++) + *ctx++ = pg_readl(TRISTATE_REG_A + i*4); + + for (i = 0; i < ARRAY_SIZE(tegra_soc_drive_pingroups); i++) + *ctx++ = pg_readl(tegra_soc_drive_pingroups[i].reg); } void tegra_pinmux_resume(void) @@ -257,5 +271,8 @@ void tegra_pinmux_resume(void) for (i = 0; i < TRISTATE_REG_NUM; i++) pg_writel(*ctx++, TRISTATE_REG_A + i*4); + + for (i = 0; i < ARRAY_SIZE(tegra_soc_drive_pingroups); i++) + pg_writel(*ctx++, tegra_soc_drive_pingroups[i].reg); } #endif -- cgit v1.2.3-18-g5258 From 093617851c5fa0d1fdf5ce378f20691b7adb35e4 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Sun, 28 Nov 2010 16:26:19 -0800 Subject: ARM: tegra: timer: Add idle and suspend support to timers Implement read_persistent_clock by reading the Tegra RTC registers that stay running during suspend. Save and restore the timer configuration register in suspend. Signed-off-by: Colin Cross --- arch/arm/mach-tegra/timer.c | 60 +++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 58 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c index 36b53a7294c..ffa6a685974 100644 --- a/arch/arm/mach-tegra/timer.c +++ b/arch/arm/mach-tegra/timer.c @@ -38,6 +38,10 @@ #include "board.h" #include "clock.h" +#define RTC_SECONDS 0x08 +#define RTC_SHADOW_SECONDS 0x0c +#define RTC_MILLISECONDS 0x10 + #define TIMERUS_CNTR_1US 0x10 #define TIMERUS_USEC_CFG 0x14 #define TIMERUS_CNTR_FREEZE 0x4c @@ -50,9 +54,11 @@ #define TIMER_PTV 0x0 #define TIMER_PCR 0x4 -struct tegra_timer; - static void __iomem *timer_reg_base = IO_ADDRESS(TEGRA_TMR1_BASE); +static void __iomem *rtc_base = IO_ADDRESS(TEGRA_RTC_BASE); + +static struct timespec persistent_ts; +static u64 persistent_ms, last_persistent_ms; #define timer_writel(value, reg) \ __raw_writel(value, (u32)timer_reg_base + (reg)) @@ -133,6 +139,42 @@ static void notrace tegra_update_sched_clock(void) update_sched_clock(&cd, cyc, (u32)~0); } +/* + * tegra_rtc_read - Reads the Tegra RTC registers + * Care must be taken that this funciton is not called while the + * tegra_rtc driver could be executing to avoid race conditions + * on the RTC shadow register + */ +u64 tegra_rtc_read_ms(void) +{ + u32 ms = readl(rtc_base + RTC_MILLISECONDS); + u32 s = readl(rtc_base + RTC_SHADOW_SECONDS); + return (u64)s * MSEC_PER_SEC + ms; +} + +/* + * read_persistent_clock - Return time from a persistent clock. + * + * Reads the time from a source which isn't disabled during PM, the + * 32k sync timer. Convert the cycles elapsed since last read into + * nsecs and adds to a monotonically increasing timespec. + * Care must be taken that this funciton is not called while the + * tegra_rtc driver could be executing to avoid race conditions + * on the RTC shadow register + */ +void read_persistent_clock(struct timespec *ts) +{ + u64 delta; + struct timespec *tsp = &persistent_ts; + + last_persistent_ms = persistent_ms; + persistent_ms = tegra_rtc_read_ms(); + delta = persistent_ms - last_persistent_ms; + + timespec_add_ns(tsp, delta * NSEC_PER_MSEC); + *ts = *tsp; +} + static irqreturn_t tegra_timer_interrupt(int irq, void *dev_id) { struct clock_event_device *evt = (struct clock_event_device *)dev_id; @@ -204,3 +246,17 @@ static void __init tegra_init_timer(void) struct sys_timer tegra_timer = { .init = tegra_init_timer, }; + +#ifdef CONFIG_PM +static u32 usec_config; + +void tegra_timer_suspend(void) +{ + usec_config = timer_readl(TIMERUS_USEC_CFG); +} + +void tegra_timer_resume(void) +{ + timer_writel(usec_config, TIMERUS_USEC_CFG); +} +#endif -- cgit v1.2.3-18-g5258 From 3524b70ef3336a4f1351a489e83894b88106ab7c Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Sun, 28 Nov 2010 22:23:55 -0800 Subject: ARM: tegra: irq: Add support for suspend wake sources Signed-off-by: Colin Cross --- arch/arm/mach-tegra/include/mach/legacy_irq.h | 4 + arch/arm/mach-tegra/irq.c | 176 +++++++++++--------------- arch/arm/mach-tegra/legacy_irq.c | 109 +++++++++++++++- 3 files changed, 184 insertions(+), 105 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/include/mach/legacy_irq.h b/arch/arm/mach-tegra/include/mach/legacy_irq.h index db1eb3dd04c..d898c0e3d90 100644 --- a/arch/arm/mach-tegra/include/mach/legacy_irq.h +++ b/arch/arm/mach-tegra/include/mach/legacy_irq.h @@ -27,5 +27,9 @@ int tegra_legacy_force_irq_status(unsigned int irq); void tegra_legacy_select_fiq(unsigned int irq, bool fiq); unsigned long tegra_legacy_vfiq(int nr); unsigned long tegra_legacy_class(int nr); +int tegra_legacy_irq_set_wake(int irq, int enable); +void tegra_legacy_irq_set_lp1_wake_mask(void); +void tegra_legacy_irq_restore_mask(void); +void tegra_init_legacy_irq(void); #endif diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c index 5f065f9fdf5..7fb73490eb5 100644 --- a/arch/arm/mach-tegra/irq.c +++ b/arch/arm/mach-tegra/irq.c @@ -18,6 +18,7 @@ */ #include +#include #include #include #include @@ -26,74 +27,104 @@ #include #include +#include #include #include "board.h" -#define INT_SYS_NR (INT_GPIO_BASE - INT_PRI_BASE) -#define INT_SYS_SZ (INT_SEC_BASE - INT_PRI_BASE) -#define PPI_NR ((INT_SYS_NR+INT_SYS_SZ-1)/INT_SYS_SZ) +#define PMC_CTRL 0x0 +#define PMC_CTRL_LATCH_WAKEUPS (1 << 5) +#define PMC_WAKE_MASK 0xc +#define PMC_WAKE_LEVEL 0x10 +#define PMC_WAKE_STATUS 0x14 +#define PMC_SW_WAKE_STATUS 0x18 +#define PMC_DPD_SAMPLE 0x20 -#define APBDMA_IRQ_STA_CPU 0x14 -#define APBDMA_IRQ_MASK_SET 0x20 -#define APBDMA_IRQ_MASK_CLR 0x24 +static void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE); -#define ICTLR_CPU_IER 0x20 -#define ICTLR_CPU_IER_SET 0x24 -#define ICTLR_CPU_IER_CLR 0x28 -#define ICTLR_CPU_IEP_CLASS 0x2c -#define ICTLR_COP_IER 0x30 -#define ICTLR_COP_IER_SET 0x34 -#define ICTLR_COP_IER_CLR 0x38 -#define ICTLR_COP_IEP_CLASS 0x3c +static u32 tegra_lp0_wake_enb; +static u32 tegra_lp0_wake_level; +static u32 tegra_lp0_wake_level_any; static void (*tegra_gic_mask_irq)(struct irq_data *d); static void (*tegra_gic_unmask_irq)(struct irq_data *d); -#define irq_to_ictlr(irq) (((irq) - 32) >> 5) -static void __iomem *tegra_ictlr_base = IO_ADDRESS(TEGRA_PRIMARY_ICTLR_BASE); -#define ictlr_to_virt(ictlr) (tegra_ictlr_base + (ictlr) * 0x100) +/* ensures that sufficient time is passed for a register write to + * serialize into the 32KHz domain */ +static void pmc_32kwritel(u32 val, unsigned long offs) +{ + writel(val, pmc + offs); + udelay(130); +} -static void tegra_mask(struct irq_data *d) +int tegra_set_lp1_wake(int irq, int enable) { - void __iomem *addr = ictlr_to_virt(irq_to_ictlr(d->irq)); - tegra_gic_mask_irq(d); - writel(1 << (d->irq & 31), addr+ICTLR_CPU_IER_CLR); + return tegra_legacy_irq_set_wake(irq, enable); } -static void tegra_unmask(struct irq_data *d) +void tegra_set_lp0_wake_pads(u32 wake_enb, u32 wake_level, u32 wake_any) { - void __iomem *addr = ictlr_to_virt(irq_to_ictlr(d->irq)); - tegra_gic_unmask_irq(d); - writel(1<<(d->irq&31), addr+ICTLR_CPU_IER_SET); + u32 temp; + u32 status; + u32 lvl; + + wake_level &= wake_enb; + wake_any &= wake_enb; + + wake_level |= (tegra_lp0_wake_level & tegra_lp0_wake_enb); + wake_any |= (tegra_lp0_wake_level_any & tegra_lp0_wake_enb); + + wake_enb |= tegra_lp0_wake_enb; + + pmc_32kwritel(0, PMC_SW_WAKE_STATUS); + temp = readl(pmc + PMC_CTRL); + temp |= PMC_CTRL_LATCH_WAKEUPS; + pmc_32kwritel(temp, PMC_CTRL); + temp &= ~PMC_CTRL_LATCH_WAKEUPS; + pmc_32kwritel(temp, PMC_CTRL); + status = readl(pmc + PMC_SW_WAKE_STATUS); + lvl = readl(pmc + PMC_WAKE_LEVEL); + + /* flip the wakeup trigger for any-edge triggered pads + * which are currently asserting as wakeups */ + lvl ^= status; + lvl &= wake_any; + + wake_level |= lvl; + + writel(wake_level, pmc + PMC_WAKE_LEVEL); + /* Enable DPD sample to trigger sampling pads data and direction + * in which pad will be driven during lp0 mode*/ + writel(0x1, pmc + PMC_DPD_SAMPLE); + + writel(wake_enb, pmc + PMC_WAKE_MASK); } -#ifdef CONFIG_PM +static void tegra_mask(struct irq_data *d) +{ + tegra_gic_mask_irq(d); + tegra_legacy_mask_irq(d->irq); +} -static int tegra_set_wake(struct irq_data *d, unsigned int on) +static void tegra_unmask(struct irq_data *d) { - return 0; + tegra_gic_unmask_irq(d); + tegra_legacy_unmask_irq(d->irq); } -#endif static struct irq_chip tegra_irq = { - .name = "PPI", - .irq_mask = tegra_mask, - .irq_unmask = tegra_unmask, -#ifdef CONFIG_PM - .irq_set_wake = tegra_set_wake, -#endif + .name = "PPI", + .irq_mask = tegra_mask, + .irq_unmask = tegra_unmask, }; void __init tegra_init_irq(void) { struct irq_chip *gic; unsigned int i; + int irq; - for (i = 0; i < PPI_NR; i++) { - writel(~0, ictlr_to_virt(i) + ICTLR_CPU_IER_CLR); - writel(0, ictlr_to_virt(i) + ICTLR_CPU_IEP_CLASS); - } + tegra_init_legacy_irq(); gic_init(0, 29, IO_ADDRESS(TEGRA_ARM_INT_DIST_BASE), IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x100)); @@ -106,67 +137,10 @@ void __init tegra_init_irq(void) tegra_irq.irq_set_affinity = gic->irq_set_affinity; #endif - for (i = INT_PRI_BASE; i < INT_GPIO_BASE; i++) { - set_irq_chip(i, &tegra_irq); - set_irq_handler(i, handle_level_irq); - set_irq_flags(i, IRQF_VALID); - } -} - -#ifdef CONFIG_PM -static u32 cop_ier[PPI_NR]; -static u32 cpu_ier[PPI_NR]; -static u32 cpu_iep[PPI_NR]; - -void tegra_irq_suspend(void) -{ - unsigned long flags; - int i; - - for (i = INT_PRI_BASE; i < INT_GPIO_BASE; i++) { - struct irq_desc *desc = irq_to_desc(i); - if (!desc) - continue; - if (desc->status & IRQ_WAKEUP) { - pr_debug("irq %d is wakeup\n", i); - continue; - } - disable_irq(i); - } - - local_irq_save(flags); - for (i = 0; i < PPI_NR; i++) { - void __iomem *ictlr = ictlr_to_virt(i); - cpu_ier[i] = readl(ictlr + ICTLR_CPU_IER); - cpu_iep[i] = readl(ictlr + ICTLR_CPU_IEP_CLASS); - cop_ier[i] = readl(ictlr + ICTLR_COP_IER); - writel(~0, ictlr + ICTLR_COP_IER_CLR); + for (i = 0; i < INT_MAIN_NR; i++) { + irq = INT_PRI_BASE + i; + set_irq_chip(irq, &tegra_irq); + set_irq_handler(irq, handle_level_irq); + set_irq_flags(irq, IRQF_VALID); } - local_irq_restore(flags); } - -void tegra_irq_resume(void) -{ - unsigned long flags; - int i; - - local_irq_save(flags); - for (i = 0; i < PPI_NR; i++) { - void __iomem *ictlr = ictlr_to_virt(i); - writel(cpu_iep[i], ictlr + ICTLR_CPU_IEP_CLASS); - writel(~0ul, ictlr + ICTLR_CPU_IER_CLR); - writel(cpu_ier[i], ictlr + ICTLR_CPU_IER_SET); - writel(0, ictlr + ICTLR_COP_IEP_CLASS); - writel(~0ul, ictlr + ICTLR_COP_IER_CLR); - writel(cop_ier[i], ictlr + ICTLR_COP_IER_SET); - } - local_irq_restore(flags); - - for (i = INT_PRI_BASE; i < INT_GPIO_BASE; i++) { - struct irq_desc *desc = irq_to_desc(i); - if (!desc || (desc->status & IRQ_WAKEUP)) - continue; - enable_irq(i); - } -} -#endif diff --git a/arch/arm/mach-tegra/legacy_irq.c b/arch/arm/mach-tegra/legacy_irq.c index 7cc8601c19f..38eb719a4f5 100644 --- a/arch/arm/mach-tegra/legacy_irq.c +++ b/arch/arm/mach-tegra/legacy_irq.c @@ -18,17 +18,30 @@ #include #include #include +#include #include -#define ICTLR_CPU_IER 0x20 -#define ICTLR_CPU_IER_SET 0x24 -#define ICTLR_CPU_IER_CLR 0x28 -#define ICTLR_CPU_IEP_CLASS 0x2C +#define INT_SYS_NR (INT_GPIO_BASE - INT_PRI_BASE) +#define INT_SYS_SZ (INT_SEC_BASE - INT_PRI_BASE) +#define PPI_NR ((INT_SYS_NR+INT_SYS_SZ-1)/INT_SYS_SZ) + #define ICTLR_CPU_IEP_VFIQ 0x08 #define ICTLR_CPU_IEP_FIR 0x14 #define ICTLR_CPU_IEP_FIR_SET 0x18 #define ICTLR_CPU_IEP_FIR_CLR 0x1c +#define ICTLR_CPU_IER 0x20 +#define ICTLR_CPU_IER_SET 0x24 +#define ICTLR_CPU_IER_CLR 0x28 +#define ICTLR_CPU_IEP_CLASS 0x2C + +#define ICTLR_COP_IER 0x30 +#define ICTLR_COP_IER_SET 0x34 +#define ICTLR_COP_IER_CLR 0x38 +#define ICTLR_COP_IEP_CLASS 0x3c + +#define NUM_ICTLRS 4 + static void __iomem *ictlr_reg_base[] = { IO_ADDRESS(TEGRA_PRIMARY_ICTLR_BASE), IO_ADDRESS(TEGRA_SECONDARY_ICTLR_BASE), @@ -36,6 +49,9 @@ static void __iomem *ictlr_reg_base[] = { IO_ADDRESS(TEGRA_QUATERNARY_ICTLR_BASE), }; +static u32 tegra_legacy_wake_mask[4]; +static u32 tegra_legacy_saved_mask[4]; + /* When going into deep sleep, the CPU is powered down, taking the GIC with it In order to wake, the wake interrupts need to be enabled in the legacy interrupt controller. */ @@ -112,3 +128,88 @@ unsigned long tegra_legacy_class(int nr) base = ictlr_reg_base[nr]; return readl(base + ICTLR_CPU_IEP_CLASS); } + +int tegra_legacy_irq_set_wake(int irq, int enable) +{ + irq -= 32; + if (enable) + tegra_legacy_wake_mask[irq >> 5] |= 1 << (irq & 31); + else + tegra_legacy_wake_mask[irq >> 5] &= ~(1 << (irq & 31)); + + return 0; +} + +void tegra_legacy_irq_set_lp1_wake_mask(void) +{ + void __iomem *base; + int i; + + for (i = 0; i < NUM_ICTLRS; i++) { + base = ictlr_reg_base[i]; + tegra_legacy_saved_mask[i] = readl(base + ICTLR_CPU_IER); + writel(tegra_legacy_wake_mask[i], base + ICTLR_CPU_IER); + } +} + +void tegra_legacy_irq_restore_mask(void) +{ + void __iomem *base; + int i; + + for (i = 0; i < NUM_ICTLRS; i++) { + base = ictlr_reg_base[i]; + writel(tegra_legacy_saved_mask[i], base + ICTLR_CPU_IER); + } +} + +void tegra_init_legacy_irq(void) +{ + int i; + + for (i = 0; i < NUM_ICTLRS; i++) { + void __iomem *ictlr = ictlr_reg_base[i]; + writel(~0, ictlr + ICTLR_CPU_IER_CLR); + writel(0, ictlr + ICTLR_CPU_IEP_CLASS); + } +} + +#ifdef CONFIG_PM +static u32 cop_ier[NUM_ICTLRS]; +static u32 cpu_ier[NUM_ICTLRS]; +static u32 cpu_iep[NUM_ICTLRS]; + +void tegra_irq_suspend(void) +{ + unsigned long flags; + int i; + + local_irq_save(flags); + for (i = 0; i < NUM_ICTLRS; i++) { + void __iomem *ictlr = ictlr_reg_base[i]; + cpu_ier[i] = readl(ictlr + ICTLR_CPU_IER); + cpu_iep[i] = readl(ictlr + ICTLR_CPU_IEP_CLASS); + cop_ier[i] = readl(ictlr + ICTLR_COP_IER); + writel(~0, ictlr + ICTLR_COP_IER_CLR); + } + local_irq_restore(flags); +} + +void tegra_irq_resume(void) +{ + unsigned long flags; + int i; + + local_irq_save(flags); + for (i = 0; i < NUM_ICTLRS; i++) { + void __iomem *ictlr = ictlr_reg_base[i]; + writel(cpu_iep[i], ictlr + ICTLR_CPU_IEP_CLASS); + writel(~0ul, ictlr + ICTLR_CPU_IER_CLR); + writel(cpu_ier[i], ictlr + ICTLR_CPU_IER_SET); + writel(0, ictlr + ICTLR_COP_IEP_CLASS); + writel(~0ul, ictlr + ICTLR_COP_IER_CLR); + writel(cop_ier[i], ictlr + ICTLR_COP_IER_SET); + } + local_irq_restore(flags); +} +#endif -- cgit v1.2.3-18-g5258 From 26d902c0c6d6254f471663305d48b63f027ddb0c Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Wed, 9 Feb 2011 22:17:17 -0800 Subject: ARM: tegra: irq: Implement retrigger Signed-off-by: Colin Cross --- arch/arm/mach-tegra/irq.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c index 7fb73490eb5..dfbc219ea49 100644 --- a/arch/arm/mach-tegra/irq.c +++ b/arch/arm/mach-tegra/irq.c @@ -48,6 +48,7 @@ static u32 tegra_lp0_wake_level_any; static void (*tegra_gic_mask_irq)(struct irq_data *d); static void (*tegra_gic_unmask_irq)(struct irq_data *d); +static void (*tegra_gic_ack_irq)(struct irq_data *d); /* ensures that sufficient time is passed for a register write to * serialize into the 32KHz domain */ @@ -112,10 +113,24 @@ static void tegra_unmask(struct irq_data *d) tegra_legacy_unmask_irq(d->irq); } +static void tegra_ack(struct irq_data *d) +{ + tegra_legacy_force_irq_clr(d->irq); + tegra_gic_ack_irq(d); +} + +static int tegra_retrigger(struct irq_data *d) +{ + tegra_legacy_force_irq_set(d->irq); + return 1; +} + static struct irq_chip tegra_irq = { .name = "PPI", + .irq_ack = tegra_ack, .irq_mask = tegra_mask, .irq_unmask = tegra_unmask, + .irq_retrigger = tegra_retrigger, }; void __init tegra_init_irq(void) @@ -132,7 +147,7 @@ void __init tegra_init_irq(void) gic = get_irq_chip(29); tegra_gic_unmask_irq = gic->irq_unmask; tegra_gic_mask_irq = gic->irq_mask; - tegra_irq.irq_ack = gic->irq_ack; + tegra_gic_ack_irq = gic->irq_ack; #ifdef CONFIG_SMP tegra_irq.irq_set_affinity = gic->irq_set_affinity; #endif -- cgit v1.2.3-18-g5258 From 44d60c0f5c58c2168f31df9a481761451840eb54 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Thu, 10 Feb 2011 12:19:47 +0100 Subject: x86, microcode, AMD: Extend ucode size verification The different families have a different max size for the ucode patch, adjust size checking to the family we're running on. Also, do not vzalloc the max size of the ucode but only the actual size that is passed on from the firmware loader. Signed-off-by: Borislav Petkov --- arch/x86/kernel/microcode_amd.c | 60 ++++++++++++++++++++++++++++++----------- 1 file changed, 44 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c index adbcef4f633..9fb8405451c 100644 --- a/arch/x86/kernel/microcode_amd.c +++ b/arch/x86/kernel/microcode_amd.c @@ -66,7 +66,6 @@ struct microcode_amd { unsigned int mpb[0]; }; -#define UCODE_MAX_SIZE 2048 #define UCODE_CONTAINER_SECTION_HDR 8 #define UCODE_CONTAINER_HEADER_SIZE 12 @@ -155,31 +154,60 @@ static int apply_microcode_amd(int cpu) return 0; } +static unsigned int verify_ucode_size(int cpu, const u8 *buf, unsigned int size) +{ + struct cpuinfo_x86 *c = &cpu_data(cpu); + unsigned int max_size, actual_size; + +#define F1XH_MPB_MAX_SIZE 2048 +#define F14H_MPB_MAX_SIZE 1824 +#define F15H_MPB_MAX_SIZE 4096 + + switch (c->x86) { + case 0x14: + max_size = F14H_MPB_MAX_SIZE; + break; + case 0x15: + max_size = F15H_MPB_MAX_SIZE; + break; + default: + max_size = F1XH_MPB_MAX_SIZE; + break; + } + + actual_size = buf[4] + (buf[5] << 8); + + if (actual_size > size || actual_size > max_size) { + pr_err("section size mismatch\n"); + return 0; + } + + return actual_size; +} + static struct microcode_header_amd * -get_next_ucode(const u8 *buf, unsigned int size, unsigned int *mc_size) +get_next_ucode(int cpu, const u8 *buf, unsigned int size, unsigned int *mc_size) { - struct microcode_header_amd *mc; - unsigned int total_size; + struct microcode_header_amd *mc = NULL; + unsigned int actual_size = 0; if (buf[0] != UCODE_UCODE_TYPE) { pr_err("invalid type field in container file section header\n"); - return NULL; + goto out; } - total_size = buf[4] + (buf[5] << 8); - - if (total_size > size || total_size > UCODE_MAX_SIZE) { - pr_err("section size mismatch\n"); - return NULL; - } + actual_size = verify_ucode_size(cpu, buf, size); + if (!actual_size) + goto out; - mc = vzalloc(UCODE_MAX_SIZE); + mc = vzalloc(actual_size); if (!mc) - return NULL; + goto out; - get_ucode_data(mc, buf + UCODE_CONTAINER_SECTION_HDR, total_size); - *mc_size = total_size + UCODE_CONTAINER_SECTION_HDR; + get_ucode_data(mc, buf + UCODE_CONTAINER_SECTION_HDR, actual_size); + *mc_size = actual_size + UCODE_CONTAINER_SECTION_HDR; +out: return mc; } @@ -234,7 +262,7 @@ generic_load_microcode(int cpu, const u8 *data, size_t size) leftover = size - offset; while (leftover) { - mc_hdr = get_next_ucode(ucode_ptr, leftover, &mc_size); + mc_hdr = get_next_ucode(cpu, ucode_ptr, leftover, &mc_size); if (!mc_hdr) break; -- cgit v1.2.3-18-g5258 From 2fb270f3212a1e6a73f86f76c85caee93aae4386 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 9 Feb 2011 08:21:02 +0000 Subject: x86: Fix section mismatch in LAPIC initialization Additionally doing things conditionally upon smp_processor_id() being zero is generally a bad idea, as this means CPU 0 cannot be offlined and brought back online later again. While there may be other places where this is done, I think adding more of those should be avoided so that some day SMP can really become "symmetrical". Signed-off-by: Jan Beulich Cc: Cyrill Gorcunov LKML-Reference: <4D525C7E0200007800030EE1@vpn.id2.novell.com> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/apic.h | 1 + arch/x86/kernel/apic/apic.c | 9 +++++++-- arch/x86/kernel/smpboot.c | 4 ++-- 3 files changed, 10 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h index 5e3969c36d7..3c896946f4c 100644 --- a/arch/x86/include/asm/apic.h +++ b/arch/x86/include/asm/apic.h @@ -233,6 +233,7 @@ extern void sync_Arb_IDs(void); extern void init_bsp_APIC(void); extern void setup_local_APIC(void); extern void end_local_APIC_setup(void); +extern void bsp_end_local_APIC_setup(void); extern void init_apic_mappings(void); void register_lapic_address(unsigned long address); extern void setup_boot_APIC_clock(void); diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 06c196d7e59..76b96d74978 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1381,12 +1381,17 @@ void __cpuinit end_local_APIC_setup(void) #endif apic_pm_activate(); +} + +void __init bsp_end_local_APIC_setup(void) +{ + end_local_APIC_setup(); /* * Now that local APIC setup is completed for BP, configure the fault * handling for interrupt remapping. */ - if (!smp_processor_id() && intr_remapping_enabled) + if (intr_remapping_enabled) enable_drhd_fault_handling(); } @@ -1756,7 +1761,7 @@ int __init APIC_init_uniprocessor(void) enable_IO_APIC(); #endif - end_local_APIC_setup(); + bsp_end_local_APIC_setup(); #ifdef CONFIG_X86_IO_APIC if (smp_found_config && !skip_ioapic_setup && nr_ioapics) diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 03273b6c272..08776a95348 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -1060,7 +1060,7 @@ static int __init smp_sanity_check(unsigned max_cpus) connect_bsp_APIC(); setup_local_APIC(); - end_local_APIC_setup(); + bsp_end_local_APIC_setup(); return -1; } @@ -1137,7 +1137,7 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus) if (!skip_ioapic_setup && nr_ioapics) enable_IO_APIC(); - end_local_APIC_setup(); + bsp_end_local_APIC_setup(); map_cpu_to_logical_apicid(); -- cgit v1.2.3-18-g5258 From 94d1ac8b55799be10487fff9766cce6d6628462a Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 9 Feb 2011 08:22:46 +0000 Subject: x86: Reduce back the alignment of the per-CPU data section This complements commit: 47f19a0814e8: percpu: Remove the multi-page alignment facility reverting one leftover of: fe8e0c25cad2: x86, 32-bit: Align percpu area and irq stacks to THREAD_SIZE Signed-off-by: Jan Beulich Acked-by: Alexander van Heukelum Cc: Linus Torvalds LKML-Reference: <4D525CE60200007800030EE5@vpn.id2.novell.com> Signed-off-by: Ingo Molnar Cc: Alexander van Heukelum --- arch/x86/kernel/vmlinux.lds.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S index bf470075518..e9f7a3c838c 100644 --- a/arch/x86/kernel/vmlinux.lds.S +++ b/arch/x86/kernel/vmlinux.lds.S @@ -305,7 +305,7 @@ SECTIONS } #if !defined(CONFIG_X86_64) || !defined(CONFIG_SMP) - PERCPU(THREAD_SIZE) + PERCPU(PAGE_SIZE) #endif . = ALIGN(PAGE_SIZE); -- cgit v1.2.3-18-g5258 From b82fef82d56789439e6be638a87a1a5bba1e6e75 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 9 Feb 2011 08:24:34 +0000 Subject: x86: Partly unify asm-offsets_{32,64}.c Just consolidating the common parts. Full unification would seem straight forward, but it's not clear the necessary #ifdef-s would be acceptable. Signed-off-by: Jan Beulich LKML-Reference: <4D525D520200007800030EE9@vpn.id2.novell.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/asm-offsets.c | 70 +++++++++++++++++++++++++++++++ arch/x86/kernel/asm-offsets_32.c | 69 ------------------------------ arch/x86/kernel/asm-offsets_64.c | 90 +++++++--------------------------------- 3 files changed, 84 insertions(+), 145 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/asm-offsets.c b/arch/x86/kernel/asm-offsets.c index cfa82c899f4..2b141c1915a 100644 --- a/arch/x86/kernel/asm-offsets.c +++ b/arch/x86/kernel/asm-offsets.c @@ -1,5 +1,75 @@ +/* + * Generate definitions needed by assembly language modules. + * This code generates raw asm output which is post-processed to extract + * and format the required data. + */ +#define COMPILE_OFFSETS + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_XEN +#include +#endif + #ifdef CONFIG_X86_32 # include "asm-offsets_32.c" #else # include "asm-offsets_64.c" #endif + +void common(void) { + BLANK(); + DEFINE(PAGE_SIZE_asm, PAGE_SIZE); + DEFINE(PAGE_SHIFT_asm, PAGE_SHIFT); + DEFINE(THREAD_SIZE_asm, THREAD_SIZE); + + BLANK(); + OFFSET(TI_flags, thread_info, flags); + OFFSET(TI_status, thread_info, status); + OFFSET(TI_addr_limit, thread_info, addr_limit); + OFFSET(TI_preempt_count, thread_info, preempt_count); + + BLANK(); + OFFSET(crypto_tfm_ctx_offset, crypto_tfm, __crt_ctx); + + BLANK(); + OFFSET(pbe_address, pbe, address); + OFFSET(pbe_orig_address, pbe, orig_address); + OFFSET(pbe_next, pbe, next); + +#ifdef CONFIG_PARAVIRT + BLANK(); + OFFSET(PARAVIRT_enabled, pv_info, paravirt_enabled); + OFFSET(PARAVIRT_PATCH_pv_cpu_ops, paravirt_patch_template, pv_cpu_ops); + OFFSET(PARAVIRT_PATCH_pv_irq_ops, paravirt_patch_template, pv_irq_ops); + OFFSET(PV_IRQ_irq_disable, pv_irq_ops, irq_disable); + OFFSET(PV_IRQ_irq_enable, pv_irq_ops, irq_enable); + OFFSET(PV_CPU_iret, pv_cpu_ops, iret); + OFFSET(PV_CPU_irq_enable_sysexit, pv_cpu_ops, irq_enable_sysexit); + OFFSET(PV_CPU_read_cr0, pv_cpu_ops, read_cr0); + OFFSET(PV_MMU_read_cr2, pv_mmu_ops, read_cr2); +#endif + +#ifdef CONFIG_XEN + BLANK(); + OFFSET(XEN_vcpu_info_mask, vcpu_info, evtchn_upcall_mask); + OFFSET(XEN_vcpu_info_pending, vcpu_info, evtchn_upcall_pending); +#endif + + BLANK(); + OFFSET(BP_scratch, boot_params, scratch); + OFFSET(BP_loadflags, boot_params, hdr.loadflags); + OFFSET(BP_hardware_subarch, boot_params, hdr.hardware_subarch); + OFFSET(BP_version, boot_params, hdr.version); + OFFSET(BP_kernel_alignment, boot_params, hdr.kernel_alignment); +} diff --git a/arch/x86/kernel/asm-offsets_32.c b/arch/x86/kernel/asm-offsets_32.c index 1a4088dda37..c29d631af6f 100644 --- a/arch/x86/kernel/asm-offsets_32.c +++ b/arch/x86/kernel/asm-offsets_32.c @@ -1,26 +1,4 @@ -/* - * Generate definitions needed by assembly language modules. - * This code generates raw asm output which is post-processed - * to extract and format the required data. - */ - -#include -#include -#include -#include -#include -#include #include -#include -#include -#include -#include -#include -#include -#include -#include - -#include #include #include "../../../drivers/lguest/lg.h" @@ -51,21 +29,10 @@ void foo(void) OFFSET(CPUINFO_x86_vendor_id, cpuinfo_x86, x86_vendor_id); BLANK(); - OFFSET(TI_task, thread_info, task); - OFFSET(TI_exec_domain, thread_info, exec_domain); - OFFSET(TI_flags, thread_info, flags); - OFFSET(TI_status, thread_info, status); - OFFSET(TI_preempt_count, thread_info, preempt_count); - OFFSET(TI_addr_limit, thread_info, addr_limit); - OFFSET(TI_restart_block, thread_info, restart_block); OFFSET(TI_sysenter_return, thread_info, sysenter_return); OFFSET(TI_cpu, thread_info, cpu); BLANK(); - OFFSET(GDS_size, desc_ptr, size); - OFFSET(GDS_address, desc_ptr, address); - BLANK(); - OFFSET(PT_EBX, pt_regs, bx); OFFSET(PT_ECX, pt_regs, cx); OFFSET(PT_EDX, pt_regs, dx); @@ -85,42 +52,13 @@ void foo(void) OFFSET(PT_OLDSS, pt_regs, ss); BLANK(); - OFFSET(EXEC_DOMAIN_handler, exec_domain, handler); OFFSET(IA32_RT_SIGFRAME_sigcontext, rt_sigframe, uc.uc_mcontext); BLANK(); - OFFSET(pbe_address, pbe, address); - OFFSET(pbe_orig_address, pbe, orig_address); - OFFSET(pbe_next, pbe, next); - /* Offset from the sysenter stack to tss.sp0 */ DEFINE(TSS_sysenter_sp0, offsetof(struct tss_struct, x86_tss.sp0) - sizeof(struct tss_struct)); - DEFINE(PAGE_SIZE_asm, PAGE_SIZE); - DEFINE(PAGE_SHIFT_asm, PAGE_SHIFT); - DEFINE(THREAD_SIZE_asm, THREAD_SIZE); - - OFFSET(crypto_tfm_ctx_offset, crypto_tfm, __crt_ctx); - -#ifdef CONFIG_PARAVIRT - BLANK(); - OFFSET(PARAVIRT_enabled, pv_info, paravirt_enabled); - OFFSET(PARAVIRT_PATCH_pv_cpu_ops, paravirt_patch_template, pv_cpu_ops); - OFFSET(PARAVIRT_PATCH_pv_irq_ops, paravirt_patch_template, pv_irq_ops); - OFFSET(PV_IRQ_irq_disable, pv_irq_ops, irq_disable); - OFFSET(PV_IRQ_irq_enable, pv_irq_ops, irq_enable); - OFFSET(PV_CPU_iret, pv_cpu_ops, iret); - OFFSET(PV_CPU_irq_enable_sysexit, pv_cpu_ops, irq_enable_sysexit); - OFFSET(PV_CPU_read_cr0, pv_cpu_ops, read_cr0); -#endif - -#ifdef CONFIG_XEN - BLANK(); - OFFSET(XEN_vcpu_info_mask, vcpu_info, evtchn_upcall_mask); - OFFSET(XEN_vcpu_info_pending, vcpu_info, evtchn_upcall_pending); -#endif - #if defined(CONFIG_LGUEST) || defined(CONFIG_LGUEST_GUEST) || defined(CONFIG_LGUEST_MODULE) BLANK(); OFFSET(LGUEST_DATA_irq_enabled, lguest_data, irq_enabled); @@ -139,11 +77,4 @@ void foo(void) OFFSET(LGUEST_PAGES_regs_errcode, lguest_pages, regs.errcode); OFFSET(LGUEST_PAGES_regs, lguest_pages, regs); #endif - - BLANK(); - OFFSET(BP_scratch, boot_params, scratch); - OFFSET(BP_loadflags, boot_params, hdr.loadflags); - OFFSET(BP_hardware_subarch, boot_params, hdr.hardware_subarch); - OFFSET(BP_version, boot_params, hdr.version); - OFFSET(BP_kernel_alignment, boot_params, hdr.kernel_alignment); } diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c index 4a6aeedcd96..e72a1194af2 100644 --- a/arch/x86/kernel/asm-offsets_64.c +++ b/arch/x86/kernel/asm-offsets_64.c @@ -1,27 +1,4 @@ -/* - * Generate definitions needed by assembly language modules. - * This code generates raw asm output which is post-processed to extract - * and format the required data. - */ -#define COMPILE_OFFSETS - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include #include -#include -#include - -#include - -#include #define __NO_STUBS 1 #undef __SYSCALL @@ -33,41 +10,19 @@ static char syscalls[] = { int main(void) { -#define ENTRY(entry) DEFINE(tsk_ ## entry, offsetof(struct task_struct, entry)) - ENTRY(state); - ENTRY(flags); - ENTRY(pid); - BLANK(); -#undef ENTRY -#define ENTRY(entry) DEFINE(TI_ ## entry, offsetof(struct thread_info, entry)) - ENTRY(flags); - ENTRY(addr_limit); - ENTRY(preempt_count); - ENTRY(status); -#ifdef CONFIG_IA32_EMULATION - ENTRY(sysenter_return); -#endif - BLANK(); -#undef ENTRY #ifdef CONFIG_PARAVIRT - BLANK(); - OFFSET(PARAVIRT_enabled, pv_info, paravirt_enabled); - OFFSET(PARAVIRT_PATCH_pv_cpu_ops, paravirt_patch_template, pv_cpu_ops); - OFFSET(PARAVIRT_PATCH_pv_irq_ops, paravirt_patch_template, pv_irq_ops); - OFFSET(PV_IRQ_irq_disable, pv_irq_ops, irq_disable); - OFFSET(PV_IRQ_irq_enable, pv_irq_ops, irq_enable); OFFSET(PV_IRQ_adjust_exception_frame, pv_irq_ops, adjust_exception_frame); - OFFSET(PV_CPU_iret, pv_cpu_ops, iret); OFFSET(PV_CPU_usergs_sysret32, pv_cpu_ops, usergs_sysret32); OFFSET(PV_CPU_usergs_sysret64, pv_cpu_ops, usergs_sysret64); - OFFSET(PV_CPU_irq_enable_sysexit, pv_cpu_ops, irq_enable_sysexit); OFFSET(PV_CPU_swapgs, pv_cpu_ops, swapgs); - OFFSET(PV_MMU_read_cr2, pv_mmu_ops, read_cr2); + BLANK(); #endif - #ifdef CONFIG_IA32_EMULATION -#define ENTRY(entry) DEFINE(IA32_SIGCONTEXT_ ## entry, offsetof(struct sigcontext_ia32, entry)) + OFFSET(TI_sysenter_return, thread_info, sysenter_return); + BLANK(); + +#define ENTRY(entry) OFFSET(IA32_SIGCONTEXT_ ## entry, sigcontext_ia32, entry) ENTRY(ax); ENTRY(bx); ENTRY(cx); @@ -79,15 +34,12 @@ int main(void) ENTRY(ip); BLANK(); #undef ENTRY - DEFINE(IA32_RT_SIGFRAME_sigcontext, - offsetof (struct rt_sigframe_ia32, uc.uc_mcontext)); + + OFFSET(IA32_RT_SIGFRAME_sigcontext, rt_sigframe_ia32, uc.uc_mcontext); BLANK(); #endif - DEFINE(pbe_address, offsetof(struct pbe, address)); - DEFINE(pbe_orig_address, offsetof(struct pbe, orig_address)); - DEFINE(pbe_next, offsetof(struct pbe, next)); - BLANK(); -#define ENTRY(entry) DEFINE(pt_regs_ ## entry, offsetof(struct pt_regs, entry)) + +#define ENTRY(entry) OFFSET(pt_regs_ ## entry, pt_regs, entry) ENTRY(bx); ENTRY(bx); ENTRY(cx); @@ -107,7 +59,8 @@ int main(void) ENTRY(flags); BLANK(); #undef ENTRY -#define ENTRY(entry) DEFINE(saved_context_ ## entry, offsetof(struct saved_context, entry)) + +#define ENTRY(entry) OFFSET(saved_context_ ## entry, saved_context, entry) ENTRY(cr0); ENTRY(cr2); ENTRY(cr3); @@ -115,26 +68,11 @@ int main(void) ENTRY(cr8); BLANK(); #undef ENTRY - DEFINE(TSS_ist, offsetof(struct tss_struct, x86_tss.ist)); - BLANK(); - DEFINE(crypto_tfm_ctx_offset, offsetof(struct crypto_tfm, __crt_ctx)); - BLANK(); - DEFINE(__NR_syscall_max, sizeof(syscalls) - 1); + OFFSET(TSS_ist, tss_struct, x86_tss.ist); BLANK(); - OFFSET(BP_scratch, boot_params, scratch); - OFFSET(BP_loadflags, boot_params, hdr.loadflags); - OFFSET(BP_hardware_subarch, boot_params, hdr.hardware_subarch); - OFFSET(BP_version, boot_params, hdr.version); - OFFSET(BP_kernel_alignment, boot_params, hdr.kernel_alignment); - BLANK(); - DEFINE(PAGE_SIZE_asm, PAGE_SIZE); -#ifdef CONFIG_XEN - BLANK(); - OFFSET(XEN_vcpu_info_mask, vcpu_info, evtchn_upcall_mask); - OFFSET(XEN_vcpu_info_pending, vcpu_info, evtchn_upcall_pending); -#undef ENTRY -#endif + DEFINE(__NR_syscall_max, sizeof(syscalls) - 1); + return 0; } -- cgit v1.2.3-18-g5258 From 691269f0d918cd72454c254f97722f194c07b9a8 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 9 Feb 2011 08:26:53 +0000 Subject: x86: Adjust section placement in AMD northbridge related code amd_nb_misc_ids[] can live in .rodata, and enable_pci_io_ecs() can be moved into .cpuinit.text. Signed-off-by: Jan Beulich Cc: Hans Rosenfeld Cc: Andreas Herrmann Cc: Borislav Petkov LKML-Reference: <4D525DDD0200007800030F07@vpn.id2.novell.com> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/amd_nb.h | 2 +- arch/x86/kernel/amd_nb.c | 7 ++++--- arch/x86/pci/amd_bus.c | 2 +- 3 files changed, 6 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/amd_nb.h b/arch/x86/include/asm/amd_nb.h index 423f11ca6ee..2b33c4df979 100644 --- a/arch/x86/include/asm/amd_nb.h +++ b/arch/x86/include/asm/amd_nb.h @@ -9,7 +9,7 @@ struct amd_nb_bus_dev_range { u8 dev_limit; }; -extern struct pci_device_id amd_nb_misc_ids[]; +extern const struct pci_device_id amd_nb_misc_ids[]; extern const struct amd_nb_bus_dev_range amd_nb_bus_dev_ranges[]; struct bootnode; diff --git a/arch/x86/kernel/amd_nb.c b/arch/x86/kernel/amd_nb.c index bf79a4a6ee2..ed3c2e5b714 100644 --- a/arch/x86/kernel/amd_nb.c +++ b/arch/x86/kernel/amd_nb.c @@ -12,7 +12,7 @@ static u32 *flush_words; -struct pci_device_id amd_nb_misc_ids[] = { +const struct pci_device_id amd_nb_misc_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC) }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_MISC) }, @@ -36,7 +36,7 @@ struct amd_northbridge_info amd_northbridges; EXPORT_SYMBOL(amd_northbridges); static struct pci_dev *next_northbridge(struct pci_dev *dev, - struct pci_device_id *ids) + const struct pci_device_id *ids) { do { dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev); @@ -107,8 +107,9 @@ EXPORT_SYMBOL_GPL(amd_cache_northbridges); they're useless anyways */ int __init early_is_amd_nb(u32 device) { - struct pci_device_id *id; + const struct pci_device_id *id; u32 vendor = device & 0xffff; + device >>= 16; for (id = amd_nb_misc_ids; id->vendor; id++) if (vendor == id->vendor && device == id->device) diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c index e27dffbbb1a..026e4931d16 100644 --- a/arch/x86/pci/amd_bus.c +++ b/arch/x86/pci/amd_bus.c @@ -350,7 +350,7 @@ static int __init early_fill_mp_bus_info(void) #define ENABLE_CF8_EXT_CFG (1ULL << 46) -static void enable_pci_io_ecs(void *unused) +static void __cpuinit enable_pci_io_ecs(void *unused) { u64 reg; rdmsrl(MSR_AMD64_NB_CFG, reg); -- cgit v1.2.3-18-g5258 From 9b1e1ea365b31584fef697a49d03536978d57b50 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Thu, 10 Feb 2011 11:07:27 +0100 Subject: ARM: imx/eukrea_mbimx27: fix compile warnings about unused variables MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/eukrea_mbimx27-baseboard.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c index b6d68cfefde..fa5288018ba 100644 --- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c @@ -249,7 +249,7 @@ static const struct imxuart_platform_data uart_pdata __initconst = { #define ADS7846_PENDOWN (GPIO_PORTD | 25) -static void ads7846_dev_init(void) +static void __maybe_unused ads7846_dev_init(void) { if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) { printk(KERN_ERR "can't get ads746 pen down GPIO\n"); @@ -268,7 +268,8 @@ static struct ads7846_platform_data ads7846_config __initdata = { .keep_vref_on = 1, }; -static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = { +static struct spi_board_info __maybe_unused + eukrea_mbimx27_spi_board_info[] __initdata = { [0] = { .modalias = "ads7846", .bus_num = 0, -- cgit v1.2.3-18-g5258 From 0193c00e85a35ceee7856c89c25b34d5752e0baa Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 10 Feb 2011 13:05:13 +0000 Subject: ARM: make SWP emulation explicit on !CPU_USE_DOMAINS SWP emulation requires that CPU domain support is disabled in order to work safely. Make that explicit in the kernel configuration to prevent illegal configurations being generated. Signed-off-by: Russell King --- arch/arm/mm/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index c9d2d56fece..e4509bae8fc 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -644,7 +644,7 @@ config ARM_THUMBEE config SWP_EMULATE bool "Emulate SWP/SWPB instructions" - depends on CPU_V7 && !CPU_V6 + depends on !CPU_USE_DOMAINS && CPU_V7 && !CPU_V6 select HAVE_PROC_CPU if PROC_FS default y if SMP help -- cgit v1.2.3-18-g5258 From 0be9a196468ad4d03a3f5a1823e02aad5be47968 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Thu, 10 Feb 2011 10:56:21 +0100 Subject: ARM: mx3/mx31_3ds: fix compiler warning without CONFIG_USB_ULPI MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes: arch/arm/mach-mx3/mach-mx31_3ds.c:249: warning: 'mx31_3ds_host2_init' defined but not used Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/mach-mx31_3ds.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c index 2f414300480..dacafcc302e 100644 --- a/arch/arm/mach-mx3/mach-mx31_3ds.c +++ b/arch/arm/mach-mx3/mach-mx31_3ds.c @@ -245,7 +245,7 @@ usbotg_free_reset: return err; } -static int mx31_3ds_host2_init(struct platform_device *pdev) +static int __maybe_unused mx31_3ds_host2_init(struct platform_device *pdev) { int err; -- cgit v1.2.3-18-g5258 From 5836372e8a0ba5cc633f61bc0484ee20c86f4b36 Mon Sep 17 00:00:00 2001 From: David Jander Date: Thu, 10 Feb 2011 10:59:44 +0100 Subject: ARM: imx+mx3: convert to mc13xxx MFD MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: David Jander Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/mach-mx27_3ds.c | 6 +++--- arch/arm/mach-imx/mach-pcm038.c | 8 ++++---- arch/arm/mach-mx3/mach-mx31_3ds.c | 6 +++--- arch/arm/mach-mx3/mach-mx31lilly.c | 4 ++-- arch/arm/mach-mx3/mach-mx31lite.c | 6 +++--- arch/arm/mach-mx3/mach-mx31moboard.c | 8 ++++---- 6 files changed, 19 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index 164331518bd..49e6a754686 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -216,7 +216,7 @@ static struct regulator_init_data vgen_init = { .consumer_supplies = vgen_consumers, }; -static struct mc13783_regulator_init_data mx27_3ds_regulators[] = { +static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = { { .id = MC13783_REG_VMMC1, .init_data = &vmmc1_init, @@ -227,10 +227,10 @@ static struct mc13783_regulator_init_data mx27_3ds_regulators[] = { }; /* MC13783 */ -static struct mc13783_platform_data mc13783_pdata __initdata = { +static struct mc13xxx_platform_data mc13783_pdata __initdata = { .regulators = mx27_3ds_regulators, .num_regulators = ARRAY_SIZE(mx27_3ds_regulators), - .flags = MC13783_USE_REGULATOR, + .flags = MC13XXX_USE_REGULATOR, }; /* SPI */ diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c index 505614803bc..ca20117d606 100644 --- a/arch/arm/mach-imx/mach-pcm038.c +++ b/arch/arm/mach-imx/mach-pcm038.c @@ -252,7 +252,7 @@ static struct regulator_init_data cam_data = { .consumer_supplies = cam_consumers, }; -static struct mc13783_regulator_init_data pcm038_regulators[] = { +static struct mc13xxx_regulator_init_data pcm038_regulators[] = { { .id = MC13783_REG_VCAM, .init_data = &cam_data, @@ -262,11 +262,11 @@ static struct mc13783_regulator_init_data pcm038_regulators[] = { }, }; -static struct mc13783_platform_data pcm038_pmic = { +static struct mc13xxx_platform_data pcm038_pmic = { .regulators = pcm038_regulators, .num_regulators = ARRAY_SIZE(pcm038_regulators), - .flags = MC13783_USE_ADC | MC13783_USE_REGULATOR | - MC13783_USE_TOUCHSCREEN, + .flags = MC13XXX_USE_ADC | MC13XXX_USE_REGULATOR | + MC13XXX_USE_TOUCHSCREEN, }; static struct spi_board_info pcm038_spi_board_info[] __initdata = { diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c index dacafcc302e..6c16c403c24 100644 --- a/arch/arm/mach-mx3/mach-mx31_3ds.c +++ b/arch/arm/mach-mx3/mach-mx31_3ds.c @@ -138,7 +138,7 @@ static struct regulator_init_data gpo_init = { } }; -static struct mc13783_regulator_init_data mx31_3ds_regulators[] = { +static struct mc13xxx_regulator_init_data mx31_3ds_regulators[] = { { .id = MC13783_REG_PWGT1SPI, /* Power Gate for ARM core. */ .init_data = &pwgtx_init, @@ -156,10 +156,10 @@ static struct mc13783_regulator_init_data mx31_3ds_regulators[] = { }; /* MC13783 */ -static struct mc13783_platform_data mc13783_pdata __initdata = { +static struct mc13xxx_platform_data mc13783_pdata __initdata = { .regulators = mx31_3ds_regulators, .num_regulators = ARRAY_SIZE(mx31_3ds_regulators), - .flags = MC13783_USE_REGULATOR | MC13783_USE_TOUCHSCREEN, + .flags = MC13XXX_USE_REGULATOR | MC13XXX_USE_TOUCHSCREEN }; /* SPI */ diff --git a/arch/arm/mach-mx3/mach-mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c index 2c595483f35..6d0e6c9a107 100644 --- a/arch/arm/mach-mx3/mach-mx31lilly.c +++ b/arch/arm/mach-mx3/mach-mx31lilly.c @@ -274,8 +274,8 @@ static const struct spi_imx_master spi1_pdata __initconst = { .num_chipselect = ARRAY_SIZE(spi_internal_chipselect), }; -static struct mc13783_platform_data mc13783_pdata __initdata = { - .flags = MC13783_USE_RTC | MC13783_USE_TOUCHSCREEN, +static struct mc13xxx_platform_data mc13783_pdata __initdata = { + .flags = MC13XXX_USE_RTC | MC13XXX_USE_TOUCHSCREEN, }; static struct spi_board_info mc13783_dev __initdata = { diff --git a/arch/arm/mach-mx3/mach-mx31lite.c b/arch/arm/mach-mx3/mach-mx31lite.c index 9e64c66396e..864aa4fce18 100644 --- a/arch/arm/mach-mx3/mach-mx31lite.c +++ b/arch/arm/mach-mx3/mach-mx31lite.c @@ -111,9 +111,9 @@ static const struct spi_imx_master spi1_pdata __initconst = { .num_chipselect = ARRAY_SIZE(spi_internal_chipselect), }; -static struct mc13783_platform_data mc13783_pdata __initdata = { - .flags = MC13783_USE_RTC | - MC13783_USE_REGULATOR, +static struct mc13xxx_platform_data mc13783_pdata __initdata = { + .flags = MC13XXX_USE_RTC | + MC13XXX_USE_REGULATOR, }; static struct spi_board_info mc13783_spi_dev __initdata = { diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c index 1aa8d65fccb..8fcf9910ed0 100644 --- a/arch/arm/mach-mx3/mach-mx31moboard.c +++ b/arch/arm/mach-mx3/mach-mx31moboard.c @@ -214,7 +214,7 @@ static struct regulator_init_data cam_vreg_data = { .consumer_supplies = cam_consumers, }; -static struct mc13783_regulator_init_data moboard_regulators[] = { +static struct mc13xxx_regulator_init_data moboard_regulators[] = { { .id = MC13783_REG_VMMC1, .init_data = &sdhc_vreg_data, @@ -267,12 +267,12 @@ static struct mc13783_leds_platform_data moboard_leds = { .tc2_period = MC13783_LED_PERIOD_10MS, }; -static struct mc13783_platform_data moboard_pmic = { +static struct mc13xxx_platform_data moboard_pmic = { .regulators = moboard_regulators, .num_regulators = ARRAY_SIZE(moboard_regulators), .leds = &moboard_leds, - .flags = MC13783_USE_REGULATOR | MC13783_USE_RTC | - MC13783_USE_ADC | MC13783_USE_LED, + .flags = MC13XXX_USE_REGULATOR | MC13XXX_USE_RTC | + MC13XXX_USE_ADC | MC13XXX_USE_LED, }; static struct spi_board_info moboard_spi_board_info[] __initdata = { -- cgit v1.2.3-18-g5258 From 3dac219615b88010601ee52e7b5fd1c32ef789ea Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Mon, 7 Feb 2011 16:35:19 +0100 Subject: ARM: imx: use .init_early to initialize cpu type and reset address MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This used to be done in .map_io which is supposed to only setup the memory mapping. Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/mach-cpuimx27.c | 11 ++++++----- arch/arm/mach-imx/mach-eukrea_cpuimx25.c | 11 ++++++----- arch/arm/mach-imx/mach-imx27_visstrim_m10.c | 11 ++++++----- arch/arm/mach-imx/mach-imx27ipcam.c | 11 ++++++----- arch/arm/mach-imx/mach-imx27lite.c | 11 ++++++----- arch/arm/mach-imx/mach-mx1ads.c | 22 ++++++++++++---------- arch/arm/mach-imx/mach-mx21ads.c | 11 ++++++----- arch/arm/mach-imx/mach-mx25_3ds.c | 12 ++++++------ arch/arm/mach-imx/mach-mx27_3ds.c | 11 ++++++----- arch/arm/mach-imx/mach-mx27ads.c | 11 ++++++----- arch/arm/mach-imx/mach-mxt_td60.c | 12 ++++++------ arch/arm/mach-imx/mach-pca100.c | 12 ++++++------ arch/arm/mach-imx/mach-pcm038.c | 11 ++++++----- arch/arm/mach-imx/mach-scb9328.c | 13 +++++++------ arch/arm/mach-imx/mm-imx1.c | 7 +++++-- arch/arm/mach-imx/mm-imx21.c | 7 +++++-- arch/arm/mach-imx/mm-imx25.c | 7 +++++-- arch/arm/mach-imx/mm-imx27.c | 7 +++++-- arch/arm/plat-mxc/include/mach/common.h | 4 ++++ 19 files changed, 115 insertions(+), 87 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index 6cf04da2456..cabb800adbb 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -304,9 +304,10 @@ static struct sys_timer eukrea_cpuimx27_timer = { }; MACHINE_START(CPUIMX27, "EUKREA CPUIMX27") - .boot_params = MX27_PHYS_OFFSET + 0x100, - .map_io = mx27_map_io, - .init_irq = mx27_init_irq, - .init_machine = eukrea_cpuimx27_init, - .timer = &eukrea_cpuimx27_timer, + .boot_params = MX27_PHYS_OFFSET + 0x100, + .map_io = mx27_map_io, + .init_early = imx27_init_early, + .init_irq = mx27_init_irq, + .timer = &eukrea_cpuimx27_timer, + .init_machine = eukrea_cpuimx27_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c index eb395aba923..439167dbe8f 100644 --- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c +++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c @@ -153,9 +153,10 @@ static struct sys_timer eukrea_cpuimx25_timer = { MACHINE_START(EUKREA_CPUIMX25, "Eukrea CPUIMX25") /* Maintainer: Eukrea Electromatique */ - .boot_params = MX25_PHYS_OFFSET + 0x100, - .map_io = mx25_map_io, - .init_irq = mx25_init_irq, - .init_machine = eukrea_cpuimx25_init, - .timer = &eukrea_cpuimx25_timer, + .boot_params = MX25_PHYS_OFFSET + 0x100, + .map_io = mx25_map_io, + .init_early = imx25_init_early, + .init_irq = mx25_init_irq, + .timer = &eukrea_cpuimx25_timer, + .init_machine = eukrea_cpuimx25_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index 40a3666ea63..494723bf7ea 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -251,9 +251,10 @@ static struct sys_timer visstrim_m10_timer = { }; MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10") - .boot_params = MX27_PHYS_OFFSET + 0x100, - .map_io = mx27_map_io, - .init_irq = mx27_init_irq, - .init_machine = visstrim_m10_board_init, - .timer = &visstrim_m10_timer, + .boot_params = MX27_PHYS_OFFSET + 0x100, + .map_io = mx27_map_io, + .init_early = imx27_init_early, + .init_irq = mx27_init_irq, + .timer = &visstrim_m10_timer, + .init_machine = visstrim_m10_board_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c index d099ea60089..9be6cd6fbf8 100644 --- a/arch/arm/mach-imx/mach-imx27ipcam.c +++ b/arch/arm/mach-imx/mach-imx27ipcam.c @@ -69,9 +69,10 @@ static struct sys_timer mx27ipcam_timer = { MACHINE_START(IMX27IPCAM, "Freescale IMX27IPCAM") /* maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX27_PHYS_OFFSET + 0x100, - .map_io = mx27_map_io, - .init_irq = mx27_init_irq, - .init_machine = mx27ipcam_init, - .timer = &mx27ipcam_timer, + .boot_params = MX27_PHYS_OFFSET + 0x100, + .map_io = mx27_map_io, + .init_early = imx27_init_early, + .init_irq = mx27_init_irq, + .timer = &mx27ipcam_timer, + .init_machine = mx27ipcam_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c index 3a1202e4721..841140516ed 100644 --- a/arch/arm/mach-imx/mach-imx27lite.c +++ b/arch/arm/mach-imx/mach-imx27lite.c @@ -75,9 +75,10 @@ static struct sys_timer mx27lite_timer = { }; MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE") - .boot_params = MX27_PHYS_OFFSET + 0x100, - .map_io = mx27_map_io, - .init_irq = mx27_init_irq, - .init_machine = mx27lite_init, - .timer = &mx27lite_timer, + .boot_params = MX27_PHYS_OFFSET + 0x100, + .map_io = mx27_map_io, + .init_early = imx27_init_early, + .init_irq = mx27_init_irq, + .timer = &mx27lite_timer, + .init_machine = mx27lite_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c index 1f446e5eb63..47cf56ac6d5 100644 --- a/arch/arm/mach-imx/mach-mx1ads.c +++ b/arch/arm/mach-imx/mach-mx1ads.c @@ -144,17 +144,19 @@ struct sys_timer mx1ads_timer = { MACHINE_START(MX1ADS, "Freescale MX1ADS") /* Maintainer: Sascha Hauer, Pengutronix */ - .boot_params = MX1_PHYS_OFFSET + 0x100, - .map_io = mx1_map_io, - .init_irq = mx1_init_irq, - .timer = &mx1ads_timer, - .init_machine = mx1ads_init, + .boot_params = MX1_PHYS_OFFSET + 0x100, + .map_io = mx1_map_io, + .init_early = imx1_init_early, + .init_irq = mx1_init_irq, + .timer = &mx1ads_timer, + .init_machine = mx1ads_init, MACHINE_END MACHINE_START(MXLADS, "Freescale MXLADS") - .boot_params = MX1_PHYS_OFFSET + 0x100, - .map_io = mx1_map_io, - .init_irq = mx1_init_irq, - .timer = &mx1ads_timer, - .init_machine = mx1ads_init, + .boot_params = MX1_PHYS_OFFSET + 0x100, + .map_io = mx1_map_io, + .init_early = imx1_init_early, + .init_irq = mx1_init_irq, + .timer = &mx1ads_timer, + .init_machine = mx1ads_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index 0a372577c2a..fa52a1086ea 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -304,9 +304,10 @@ static struct sys_timer mx21ads_timer = { MACHINE_START(MX21ADS, "Freescale i.MX21ADS") /* maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX21_PHYS_OFFSET + 0x100, - .map_io = mx21ads_map_io, - .init_irq = mx21_init_irq, - .init_machine = mx21ads_board_init, - .timer = &mx21ads_timer, + .boot_params = MX21_PHYS_OFFSET + 0x100, + .map_io = mx21ads_map_io, + .init_early = imx21_init_early, + .init_irq = mx21_init_irq, + .timer = &mx21ads_timer, + .init_machine = mx21ads_board_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c index aa76cfd9f34..0c92a80eac4 100644 --- a/arch/arm/mach-imx/mach-mx25_3ds.c +++ b/arch/arm/mach-imx/mach-mx25_3ds.c @@ -226,10 +226,10 @@ static struct sys_timer mx25pdk_timer = { MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)") /* Maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX25_PHYS_OFFSET + 0x100, - .map_io = mx25_map_io, - .init_irq = mx25_init_irq, - .init_machine = mx25pdk_init, - .timer = &mx25pdk_timer, + .boot_params = MX25_PHYS_OFFSET + 0x100, + .map_io = mx25_map_io, + .init_early = imx25_init_early, + .init_irq = mx25_init_irq, + .timer = &mx25pdk_timer, + .init_machine = mx25pdk_init, MACHINE_END - diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index 49e6a754686..4e0e225ca4a 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -295,9 +295,10 @@ static struct sys_timer mx27pdk_timer = { MACHINE_START(MX27_3DS, "Freescale MX27PDK") /* maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX27_PHYS_OFFSET + 0x100, - .map_io = mx27_map_io, - .init_irq = mx27_init_irq, - .init_machine = mx27pdk_init, - .timer = &mx27pdk_timer, + .boot_params = MX27_PHYS_OFFSET + 0x100, + .map_io = mx27_map_io, + .init_early = imx27_init_early, + .init_irq = mx27_init_irq, + .timer = &mx27pdk_timer, + .init_machine = mx27pdk_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index b832f960fec..367d1e4384c 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -344,9 +344,10 @@ static void __init mx27ads_map_io(void) MACHINE_START(MX27ADS, "Freescale i.MX27ADS") /* maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX27_PHYS_OFFSET + 0x100, - .map_io = mx27ads_map_io, - .init_irq = mx27_init_irq, - .init_machine = mx27ads_board_init, - .timer = &mx27ads_timer, + .boot_params = MX27_PHYS_OFFSET + 0x100, + .map_io = mx27ads_map_io, + .init_early = imx27_init_early, + .init_irq = mx27_init_irq, + .timer = &mx27ads_timer, + .init_machine = mx27ads_board_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c index 4ce71b0401d..69787c30c32 100644 --- a/arch/arm/mach-imx/mach-mxt_td60.c +++ b/arch/arm/mach-imx/mach-mxt_td60.c @@ -266,10 +266,10 @@ static struct sys_timer mxt_td60_timer = { MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60") /* maintainer: Maxtrack Industrial */ - .boot_params = MX27_PHYS_OFFSET + 0x100, - .map_io = mx27_map_io, - .init_irq = mx27_init_irq, - .init_machine = mxt_td60_board_init, - .timer = &mxt_td60_timer, + .boot_params = MX27_PHYS_OFFSET + 0x100, + .map_io = mx27_map_io, + .init_early = imx27_init_early, + .init_irq = mx27_init_irq, + .timer = &mxt_td60_timer, + .init_machine = mxt_td60_board_init, MACHINE_END - diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index faa4e04006e..3514178caed 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -433,10 +433,10 @@ static struct sys_timer pca100_timer = { }; MACHINE_START(PCA100, "phyCARD-i.MX27") - .boot_params = MX27_PHYS_OFFSET + 0x100, - .map_io = mx27_map_io, - .init_irq = mx27_init_irq, - .init_machine = pca100_init, - .timer = &pca100_timer, + .boot_params = MX27_PHYS_OFFSET + 0x100, + .map_io = mx27_map_io, + .init_early = imx27_init_early, + .init_irq = mx27_init_irq, + .init_machine = pca100_init, + .timer = &pca100_timer, MACHINE_END - diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c index ca20117d606..9656ef38ca9 100644 --- a/arch/arm/mach-imx/mach-pcm038.c +++ b/arch/arm/mach-imx/mach-pcm038.c @@ -340,9 +340,10 @@ static struct sys_timer pcm038_timer = { }; MACHINE_START(PCM038, "phyCORE-i.MX27") - .boot_params = MX27_PHYS_OFFSET + 0x100, - .map_io = mx27_map_io, - .init_irq = mx27_init_irq, - .init_machine = pcm038_init, - .timer = &pcm038_timer, + .boot_params = MX27_PHYS_OFFSET + 0x100, + .map_io = mx27_map_io, + .init_early = imx27_init_early, + .init_irq = mx27_init_irq, + .timer = &pcm038_timer, + .init_machine = pcm038_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c index eae878f306c..dcaee043628 100644 --- a/arch/arm/mach-imx/mach-scb9328.c +++ b/arch/arm/mach-imx/mach-scb9328.c @@ -145,10 +145,11 @@ static struct sys_timer scb9328_timer = { }; MACHINE_START(SCB9328, "Synertronixx scb9328") - /* Sascha Hauer */ - .boot_params = 0x08000100, - .map_io = mx1_map_io, - .init_irq = mx1_init_irq, - .timer = &scb9328_timer, - .init_machine = scb9328_init, + /* Sascha Hauer */ + .boot_params = 0x08000100, + .map_io = mx1_map_io, + .init_early = imx1_init_early, + .init_irq = mx1_init_irq, + .timer = &scb9328_timer, + .init_machine = scb9328_init, MACHINE_END diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c index 729ae0915af..378c61b1e74 100644 --- a/arch/arm/mach-imx/mm-imx1.c +++ b/arch/arm/mach-imx/mm-imx1.c @@ -29,11 +29,14 @@ static struct map_desc imx_io_desc[] __initdata = { }; void __init mx1_map_io(void) +{ + iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc)); +} + +void __init imx1_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX1); mxc_arch_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR)); - - iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc)); } int imx1_register_gpios(void); diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c index e728af81d1b..b6152c6b5b2 100644 --- a/arch/arm/mach-imx/mm-imx21.c +++ b/arch/arm/mach-imx/mm-imx21.c @@ -55,11 +55,14 @@ static struct map_desc imx21_io_desc[] __initdata = { * memory map for the IO modules. */ void __init mx21_map_io(void) +{ + iotable_init(imx21_io_desc, ARRAY_SIZE(imx21_io_desc)); +} + +void __init imx21_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX21); mxc_arch_reset_init(MX21_IO_ADDRESS(MX21_WDOG_BASE_ADDR)); - - iotable_init(imx21_io_desc, ARRAY_SIZE(imx21_io_desc)); } int imx21_register_gpios(void); diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c index 2edec6ce8fe..09dd8d4e15b 100644 --- a/arch/arm/mach-imx/mm-imx25.c +++ b/arch/arm/mach-imx/mm-imx25.c @@ -44,12 +44,15 @@ static struct map_desc mx25_io_desc[] __initdata = { * for the IO modules. */ void __init mx25_map_io(void) +{ + iotable_init(mx25_io_desc, ARRAY_SIZE(mx25_io_desc)); +} + +void __init imx25_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX25); mxc_iomux_v3_init(MX25_IO_ADDRESS(MX25_IOMUXC_BASE_ADDR)); mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR)); - - iotable_init(mx25_io_desc, ARRAY_SIZE(mx25_io_desc)); } int imx25_register_gpios(void); diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c index 374e48b7a41..bcaa3b69c45 100644 --- a/arch/arm/mach-imx/mm-imx27.c +++ b/arch/arm/mach-imx/mm-imx27.c @@ -55,11 +55,14 @@ static struct map_desc imx27_io_desc[] __initdata = { * memory map for the IO modules. */ void __init mx27_map_io(void) +{ + iotable_init(imx27_io_desc, ARRAY_SIZE(imx27_io_desc)); +} + +void __init imx27_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX27); mxc_arch_reset_init(MX27_IO_ADDRESS(MX27_WDOG_BASE_ADDR)); - - iotable_init(imx27_io_desc, ARRAY_SIZE(imx27_io_desc)); } int imx27_register_gpios(void); diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index aea2cd3b6d1..e4f1de0e6f6 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -24,6 +24,10 @@ extern void mx50_map_io(void); extern void mx51_map_io(void); extern void mx53_map_io(void); extern void mxc91231_map_io(void); +extern void imx1_init_early(void); +extern void imx21_init_early(void); +extern void imx25_init_early(void); +extern void imx27_init_early(void); extern void mxc_init_irq(void __iomem *); extern void tzic_init_irq(void __iomem *); extern void mx1_init_irq(void); -- cgit v1.2.3-18-g5258 From 97976e223be3091a91da103358c3c6cffff7db81 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Mon, 7 Feb 2011 16:35:20 +0100 Subject: ARM: mx3: use .init_early to initialize cpu type, reset address and iomuxer MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This used to be done in .map_io which is supposed to only setup the memory mapping. Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/mach-armadillo5x0.c | 11 ++++++----- arch/arm/mach-mx3/mach-cpuimx35.c | 11 ++++++----- arch/arm/mach-mx3/mach-kzm_arm11_01.c | 11 ++++++----- arch/arm/mach-mx3/mach-mx31_3ds.c | 11 ++++++----- arch/arm/mach-mx3/mach-mx31ads.c | 11 ++++++----- arch/arm/mach-mx3/mach-mx31lilly.c | 12 ++++++------ arch/arm/mach-mx3/mach-mx31lite.c | 11 ++++++----- arch/arm/mach-mx3/mach-mx31moboard.c | 12 ++++++------ arch/arm/mach-mx3/mach-mx35_3ds.c | 11 ++++++----- arch/arm/mach-mx3/mach-pcm037.c | 11 ++++++----- arch/arm/mach-mx3/mach-pcm043.c | 12 ++++++------ arch/arm/mach-mx3/mach-qong.c | 11 ++++++----- arch/arm/mach-mx3/mach-vpr200.c | 9 +++++---- arch/arm/mach-mx3/mm.c | 14 ++++++++++---- arch/arm/plat-mxc/include/mach/common.h | 3 +++ 15 files changed, 90 insertions(+), 71 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mx3/mach-armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c index 28b6f414b5d..835e2a082b4 100644 --- a/arch/arm/mach-mx3/mach-armadillo5x0.c +++ b/arch/arm/mach-mx3/mach-armadillo5x0.c @@ -569,9 +569,10 @@ static struct sys_timer armadillo5x0_timer = { MACHINE_START(ARMADILLO5X0, "Armadillo-500") /* Maintainer: Alberto Panizzo */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = mx31_map_io, - .init_irq = mx31_init_irq, - .timer = &armadillo5x0_timer, - .init_machine = armadillo5x0_init, + .boot_params = MX3x_PHYS_OFFSET + 0x100, + .map_io = mx31_map_io, + .init_early = imx31_init_early, + .init_irq = mx31_init_irq, + .timer = &armadillo5x0_timer, + .init_machine = armadillo5x0_init, MACHINE_END diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c index 26ae90f0258..3eedf0fcaed 100644 --- a/arch/arm/mach-mx3/mach-cpuimx35.c +++ b/arch/arm/mach-mx3/mach-cpuimx35.c @@ -184,9 +184,10 @@ struct sys_timer eukrea_cpuimx35_timer = { MACHINE_START(EUKREA_CPUIMX35, "Eukrea CPUIMX35") /* Maintainer: Eukrea Electromatique */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = mx35_map_io, - .init_irq = mx35_init_irq, - .init_machine = mxc_board_init, - .timer = &eukrea_cpuimx35_timer, + .boot_params = MX3x_PHYS_OFFSET + 0x100, + .map_io = mx35_map_io, + .init_ext3_fs = imx35_init_early, + .init_irq = mx35_init_irq, + .timer = &eukrea_cpuimx35_timer, + .init_machine = mxc_board_init, MACHINE_END diff --git a/arch/arm/mach-mx3/mach-kzm_arm11_01.c b/arch/arm/mach-mx3/mach-kzm_arm11_01.c index a5f3eb24e4d..52b8dd7192c 100644 --- a/arch/arm/mach-mx3/mach-kzm_arm11_01.c +++ b/arch/arm/mach-mx3/mach-kzm_arm11_01.c @@ -274,9 +274,10 @@ static struct sys_timer kzm_timer = { * initialize __mach_desc_KZM_ARM11_01 data structure. */ MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01") - .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = kzm_map_io, - .init_irq = mx31_init_irq, - .init_machine = kzm_board_init, - .timer = &kzm_timer, + .boot_params = MX3x_PHYS_OFFSET + 0x100, + .map_io = kzm_map_io, + .init_early = imx31_init_early, + .init_irq = mx31_init_irq, + .timer = &kzm_timer, + .init_machine = kzm_board_init, MACHINE_END diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c index 6c16c403c24..3d0ded92a8a 100644 --- a/arch/arm/mach-mx3/mach-mx31_3ds.c +++ b/arch/arm/mach-mx3/mach-mx31_3ds.c @@ -373,9 +373,10 @@ static struct sys_timer mx31_3ds_timer = { */ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)") /* Maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = mx31_map_io, - .init_irq = mx31_init_irq, - .init_machine = mxc_board_init, - .timer = &mx31_3ds_timer, + .boot_params = MX3x_PHYS_OFFSET + 0x100, + .map_io = mx31_map_io, + .init_early = imx31_init_early, + .init_irq = mx31_init_irq, + .timer = &mx31_3ds_timer, + .init_machine = mxc_board_init, MACHINE_END diff --git a/arch/arm/mach-mx3/mach-mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c index e40eb6e2694..787bdc4d6cc 100644 --- a/arch/arm/mach-mx3/mach-mx31ads.c +++ b/arch/arm/mach-mx3/mach-mx31ads.c @@ -550,9 +550,10 @@ static struct sys_timer mx31ads_timer = { */ MACHINE_START(MX31ADS, "Freescale MX31ADS") /* Maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = mx31ads_map_io, - .init_irq = mx31ads_init_irq, - .init_machine = mxc_board_init, - .timer = &mx31ads_timer, + .boot_params = MX3x_PHYS_OFFSET + 0x100, + .map_io = mx31ads_map_io, + .init_early = imx31_init_early, + .init_irq = mx31ads_init_irq, + .timer = &mx31ads_timer, + .init_machine = mxc_board_init, MACHINE_END diff --git a/arch/arm/mach-mx3/mach-mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c index 6d0e6c9a107..1c3f4913d1e 100644 --- a/arch/arm/mach-mx3/mach-mx31lilly.c +++ b/arch/arm/mach-mx3/mach-mx31lilly.c @@ -347,10 +347,10 @@ static struct sys_timer mx31lilly_timer = { }; MACHINE_START(LILLY1131, "INCO startec LILLY-1131") - .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = mx31_map_io, - .init_irq = mx31_init_irq, - .init_machine = mx31lilly_board_init, - .timer = &mx31lilly_timer, + .boot_params = MX3x_PHYS_OFFSET + 0x100, + .map_io = mx31_map_io, + .init_early = imx31_init_early, + .init_irq = mx31_init_irq, + .timer = &mx31lilly_timer, + .init_machine = mx31lilly_board_init, MACHINE_END - diff --git a/arch/arm/mach-mx3/mach-mx31lite.c b/arch/arm/mach-mx3/mach-mx31lite.c index 864aa4fce18..01e24b5045e 100644 --- a/arch/arm/mach-mx3/mach-mx31lite.c +++ b/arch/arm/mach-mx3/mach-mx31lite.c @@ -281,9 +281,10 @@ struct sys_timer mx31lite_timer = { MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM") /* Maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = mx31lite_map_io, - .init_irq = mx31_init_irq, - .init_machine = mxc_board_init, - .timer = &mx31lite_timer, + .boot_params = MX3x_PHYS_OFFSET + 0x100, + .map_io = mx31lite_map_io, + .init_early = imx31_init_early, + .init_irq = mx31_init_irq, + .timer = &mx31lite_timer, + .init_machine = mxc_board_init, MACHINE_END diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c index 8fcf9910ed0..fd988a0d9a5 100644 --- a/arch/arm/mach-mx3/mach-mx31moboard.c +++ b/arch/arm/mach-mx3/mach-mx31moboard.c @@ -564,10 +564,10 @@ struct sys_timer mx31moboard_timer = { MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard") /* Maintainer: Valentin Longchamp, EPFL Mobots group */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = mx31_map_io, - .init_irq = mx31_init_irq, - .init_machine = mxc_board_init, - .timer = &mx31moboard_timer, + .boot_params = MX3x_PHYS_OFFSET + 0x100, + .map_io = mx31_map_io, + .init_early = imx31_init_early, + .init_irq = mx31_init_irq, + .timer = &mx31moboard_timer, + .init_machine = mxc_board_init, MACHINE_END - diff --git a/arch/arm/mach-mx3/mach-mx35_3ds.c b/arch/arm/mach-mx3/mach-mx35_3ds.c index b1963f257c2..c5115dc5c0c 100644 --- a/arch/arm/mach-mx3/mach-mx35_3ds.c +++ b/arch/arm/mach-mx3/mach-mx35_3ds.c @@ -193,9 +193,10 @@ struct sys_timer mx35pdk_timer = { MACHINE_START(MX35_3DS, "Freescale MX35PDK") /* Maintainer: Freescale Semiconductor, Inc */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = mx35_map_io, - .init_irq = mx35_init_irq, - .init_machine = mxc_board_init, - .timer = &mx35pdk_timer, + .boot_params = MX3x_PHYS_OFFSET + 0x100, + .map_io = mx35_map_io, + .init_early = imx35_init_early, + .init_irq = mx35_init_irq, + .timer = &mx35pdk_timer, + .init_machine = mxc_board_init, MACHINE_END diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c index b752f6bc20a..7d444f714f3 100644 --- a/arch/arm/mach-mx3/mach-pcm037.c +++ b/arch/arm/mach-mx3/mach-pcm037.c @@ -675,9 +675,10 @@ struct sys_timer pcm037_timer = { MACHINE_START(PCM037, "Phytec Phycore pcm037") /* Maintainer: Pengutronix */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = mx31_map_io, - .init_irq = mx31_init_irq, - .init_machine = mxc_board_init, - .timer = &pcm037_timer, + .boot_params = MX3x_PHYS_OFFSET + 0x100, + .map_io = mx31_map_io, + .init_early = imx31_init_early, + .init_irq = mx31_init_irq, + .timer = &pcm037_timer, + .init_machine = mxc_board_init, MACHINE_END diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c index a515290f15f..b03e19d6548 100644 --- a/arch/arm/mach-mx3/mach-pcm043.c +++ b/arch/arm/mach-mx3/mach-pcm043.c @@ -403,10 +403,10 @@ struct sys_timer pcm043_timer = { MACHINE_START(PCM043, "Phytec Phycore pcm043") /* Maintainer: Pengutronix */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = mx35_map_io, - .init_irq = mx35_init_irq, - .init_machine = mxc_board_init, - .timer = &pcm043_timer, + .boot_params = MX3x_PHYS_OFFSET + 0x100, + .map_io = mx35_map_io, + .init_early = imx35_init_early, + .init_irq = mx35_init_irq, + .timer = &pcm043_timer, + .init_machine = mxc_board_init, MACHINE_END - diff --git a/arch/arm/mach-mx3/mach-qong.c b/arch/arm/mach-mx3/mach-qong.c index fd1050c4096..064f2db25f3 100644 --- a/arch/arm/mach-mx3/mach-qong.c +++ b/arch/arm/mach-mx3/mach-qong.c @@ -270,9 +270,10 @@ static struct sys_timer qong_timer = { MACHINE_START(QONG, "Dave/DENX QongEVB-LITE") /* Maintainer: DENX Software Engineering GmbH */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = mx31_map_io, - .init_irq = mx31_init_irq, - .init_machine = mxc_board_init, - .timer = &qong_timer, + .boot_params = MX3x_PHYS_OFFSET + 0x100, + .map_io = mx31_map_io, + .init_early = imx31_init_early, + .init_irq = mx31_init_irq, + .timer = &qong_timer, + .init_machine = mxc_board_init, MACHINE_END diff --git a/arch/arm/mach-mx3/mach-vpr200.c b/arch/arm/mach-mx3/mach-vpr200.c index 22ec78a7991..2cf390fbd98 100644 --- a/arch/arm/mach-mx3/mach-vpr200.c +++ b/arch/arm/mach-mx3/mach-vpr200.c @@ -320,8 +320,9 @@ struct sys_timer vpr200_timer = { MACHINE_START(VPR200, "VPR200") /* Maintainer: Creative Product Design */ - .map_io = mx35_map_io, - .init_irq = mx35_init_irq, - .init_machine = vpr200_board_init, - .timer = &vpr200_timer, + .map_io = mx35_map_io, + .init_early = imx35_init_early, + .init_irq = mx35_init_irq, + .timer = &vpr200_timer, + .init_machine = vpr200_board_init, MACHINE_END diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c index 47118f76024..3387319b096 100644 --- a/arch/arm/mach-mx3/mm.c +++ b/arch/arm/mach-mx3/mm.c @@ -51,11 +51,14 @@ static struct map_desc mx31_io_desc[] __initdata = { * for the IO modules. */ void __init mx31_map_io(void) +{ + iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc)); +} + +void __init imx31_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX31); mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR)); - - iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc)); } int imx31_register_gpios(void); @@ -76,12 +79,15 @@ static struct map_desc mx35_io_desc[] __initdata = { }; void __init mx35_map_io(void) +{ + iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc)); +} + +void __init imx35_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX35); mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR)); mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR)); - - iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc)); } int imx35_register_gpios(void); diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index e4f1de0e6f6..857eebf479b 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -28,6 +28,9 @@ extern void imx1_init_early(void); extern void imx21_init_early(void); extern void imx25_init_early(void); extern void imx27_init_early(void); +extern void imx31_init_early(void); +extern void imx35_init_early(void); +extern void imx50_init_early(void); extern void mxc_init_irq(void __iomem *); extern void tzic_init_irq(void __iomem *); extern void mx1_init_irq(void); -- cgit v1.2.3-18-g5258 From ab130421269aec9bf83d8ef5b7ceda80e2619599 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Mon, 7 Feb 2011 16:35:21 +0100 Subject: ARM: mx5: use .init_early to initialize cpu type, reset address and iomuxer MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This used to be done in .map_io which is supposed to only setup the memory mapping. Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/board-cpuimx51.c | 3 ++- arch/arm/mach-mx5/board-cpuimx51sd.c | 3 ++- arch/arm/mach-mx5/board-mx50_rdp.c | 3 ++- arch/arm/mach-mx5/board-mx51_3ds.c | 3 ++- arch/arm/mach-mx5/board-mx51_babbage.c | 3 ++- arch/arm/mach-mx5/board-mx51_efikamx.c | 3 ++- arch/arm/mach-mx5/board-mx53_evk.c | 3 ++- arch/arm/mach-mx5/board-mx53_loco.c | 3 ++- arch/arm/mach-mx5/board-mx53_smd.c | 3 ++- arch/arm/mach-mx5/mm-mx50.c | 6 +++++- arch/arm/mach-mx5/mm.c | 12 ++++++++++-- arch/arm/plat-mxc/include/mach/common.h | 2 ++ 12 files changed, 35 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c index f576a97ba12..2d4199d3790 100644 --- a/arch/arm/mach-mx5/board-cpuimx51.c +++ b/arch/arm/mach-mx5/board-cpuimx51.c @@ -294,7 +294,8 @@ MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module") /* Maintainer: Eric Bénard */ .boot_params = MX51_PHYS_OFFSET + 0x100, .map_io = mx51_map_io, + .init_early = imx51_init_early, .init_irq = mx51_init_irq, - .init_machine = eukrea_cpuimx51_init, .timer = &mxc_timer, + .init_machine = eukrea_cpuimx51_init, MACHINE_END diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c index ad931895d8b..6c3b445e395 100644 --- a/arch/arm/mach-mx5/board-cpuimx51sd.c +++ b/arch/arm/mach-mx5/board-cpuimx51sd.c @@ -329,7 +329,8 @@ MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD") /* Maintainer: Eric Bénard */ .boot_params = MX51_PHYS_OFFSET + 0x100, .map_io = mx51_map_io, + .init_early = imx51_init_early, .init_irq = mx51_init_irq, - .init_machine = eukrea_cpuimx51sd_init, .timer = &mxc_timer, + .init_machine = eukrea_cpuimx51sd_init, MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-mx5/board-mx50_rdp.c index 75beef74b37..dedf7f2d6d0 100644 --- a/arch/arm/mach-mx5/board-mx50_rdp.c +++ b/arch/arm/mach-mx5/board-mx50_rdp.c @@ -216,7 +216,8 @@ static struct sys_timer mx50_rdp_timer = { MACHINE_START(MX50_RDP, "Freescale MX50 Reference Design Platform") .map_io = mx50_map_io, + .init_early = imx50_init_early, .init_irq = mx50_init_irq, - .init_machine = mx50_rdp_board_init, .timer = &mx50_rdp_timer, + .init_machine = mx50_rdp_board_init, MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c index 55d5746753a..01684708ef3 100644 --- a/arch/arm/mach-mx5/board-mx51_3ds.c +++ b/arch/arm/mach-mx5/board-mx51_3ds.c @@ -168,7 +168,8 @@ MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board") /* Maintainer: Freescale Semiconductor, Inc. */ .boot_params = MX51_PHYS_OFFSET + 0x100, .map_io = mx51_map_io, + .init_early = imx51_init_early, .init_irq = mx51_init_irq, - .init_machine = mxc_board_init, .timer = &mxc_timer, + .init_machine = mxc_board_init, MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index d9d402eb947..2bd9c9e4e6b 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -398,7 +398,8 @@ MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board") /* Maintainer: Amit Kucheria */ .boot_params = MX51_PHYS_OFFSET + 0x100, .map_io = mx51_map_io, + .init_early = imx51_init_early, .init_irq = mx51_init_irq, - .init_machine = mxc_board_init, .timer = &mxc_timer, + .init_machine = mxc_board_init, MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c index e23704044eb..2aac4c5b7b5 100644 --- a/arch/arm/mach-mx5/board-mx51_efikamx.c +++ b/arch/arm/mach-mx5/board-mx51_efikamx.c @@ -347,7 +347,8 @@ MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop") /* Maintainer: Amit Kucheria */ .boot_params = MX51_PHYS_OFFSET + 0x100, .map_io = mx51_map_io, + .init_early = imx51_init_early, .init_irq = mx51_init_irq, - .init_machine = mxc_board_init, .timer = &mxc_timer, + .init_machine = mxc_board_init, MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c index 49780079f59..8ed316bc526 100644 --- a/arch/arm/mach-mx5/board-mx53_evk.c +++ b/arch/arm/mach-mx5/board-mx53_evk.c @@ -150,7 +150,8 @@ static struct sys_timer mx53_evk_timer = { MACHINE_START(MX53_EVK, "Freescale MX53 EVK Board") .map_io = mx53_map_io, + .init_early = imx53_init_early, .init_irq = mx53_init_irq, - .init_machine = mx53_evk_board_init, .timer = &mx53_evk_timer, + .init_machine = mx53_evk_board_init, MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c index 3aefd6dab04..0fea252d42e 100644 --- a/arch/arm/mach-mx5/board-mx53_loco.c +++ b/arch/arm/mach-mx5/board-mx53_loco.c @@ -82,7 +82,8 @@ static struct sys_timer mx53_loco_timer = { MACHINE_START(MX53_LOCO, "Freescale MX53 LOCO Board") .map_io = mx53_map_io, + .init_early = imx53_init_early, .init_irq = mx53_init_irq, - .init_machine = mx53_loco_board_init, .timer = &mx53_loco_timer, + .init_machine = mx53_loco_board_init, MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c index c7b45d464b6..fa0fad80fd8 100644 --- a/arch/arm/mach-mx5/board-mx53_smd.c +++ b/arch/arm/mach-mx5/board-mx53_smd.c @@ -103,7 +103,8 @@ static struct sys_timer mx53_smd_timer = { MACHINE_START(MX53_SMD, "Freescale MX53 SMD Board") .map_io = mx53_map_io, + .init_early = imx53_init_early, .init_irq = mx53_init_irq, - .init_machine = mx53_smd_board_init, .timer = &mx53_smd_timer, + .init_machine = mx53_smd_board_init, MACHINE_END diff --git a/arch/arm/mach-mx5/mm-mx50.c b/arch/arm/mach-mx5/mm-mx50.c index 8c6540e5839..69b34269dae 100644 --- a/arch/arm/mach-mx5/mm-mx50.c +++ b/arch/arm/mach-mx5/mm-mx50.c @@ -43,11 +43,15 @@ static struct map_desc mx50_io_desc[] __initdata = { * for the IO modules. */ void __init mx50_map_io(void) +{ + iotable_init(mx50_io_desc, ARRAY_SIZE(mx50_io_desc)); +} + +void __init imx50_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX50); mxc_iomux_v3_init(MX50_IO_ADDRESS(MX50_IOMUXC_BASE_ADDR)); mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR)); - iotable_init(mx50_io_desc, ARRAY_SIZE(mx50_io_desc)); } int imx50_register_gpios(void); diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c index 457f9f95204..8730cd1b94b 100644 --- a/arch/arm/mach-mx5/mm.c +++ b/arch/arm/mach-mx5/mm.c @@ -46,19 +46,27 @@ static struct map_desc mx53_io_desc[] __initdata = { * for the IO modules. */ void __init mx51_map_io(void) +{ + iotable_init(mx51_io_desc, ARRAY_SIZE(mx51_io_desc)); +} + +void __init imx51_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX51); mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR)); mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR)); - iotable_init(mx51_io_desc, ARRAY_SIZE(mx51_io_desc)); } void __init mx53_map_io(void) +{ + iotable_init(mx53_io_desc, ARRAY_SIZE(mx53_io_desc)); +} + +void __init imx53_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX53); mxc_iomux_v3_init(MX53_IO_ADDRESS(MX53_IOMUXC_BASE_ADDR)); mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG_BASE_ADDR)); - iotable_init(mx53_io_desc, ARRAY_SIZE(mx53_io_desc)); } int imx51_register_gpios(void); diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index 857eebf479b..4746b9a984a 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -31,6 +31,8 @@ extern void imx27_init_early(void); extern void imx31_init_early(void); extern void imx35_init_early(void); extern void imx50_init_early(void); +extern void imx51_init_early(void); +extern void imx53_init_early(void); extern void mxc_init_irq(void __iomem *); extern void tzic_init_irq(void __iomem *); extern void mx1_init_irq(void); -- cgit v1.2.3-18-g5258 From 23b120cdfae4f5c29da69de750d545bad719ead4 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Mon, 7 Feb 2011 16:35:22 +0100 Subject: ARM: mxc91231: use .init_early to initialize cpu type MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This used to be done in .map_io which is supposed to only setup the memory mapping. Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-mxc91231/magx-zn5.c | 11 ++++++----- arch/arm/mach-mxc91231/mm.c | 7 +++++-- arch/arm/plat-mxc/include/mach/common.h | 1 + 3 files changed, 12 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mxc91231/magx-zn5.c b/arch/arm/mach-mxc91231/magx-zn5.c index 395d83be8c9..f31a45e5a0b 100644 --- a/arch/arm/mach-mxc91231/magx-zn5.c +++ b/arch/arm/mach-mxc91231/magx-zn5.c @@ -53,9 +53,10 @@ struct sys_timer zn5_timer = { }; MACHINE_START(MAGX_ZN5, "Motorola Zn5") - .boot_params = MXC91231_PHYS_OFFSET + 0x100, - .map_io = mxc91231_map_io, - .init_irq = mxc91231_init_irq, - .timer = &zn5_timer, - .init_machine = zn5_init, + .boot_params = MXC91231_PHYS_OFFSET + 0x100, + .map_io = mxc91231_map_io, + .init_early = mxc91231_init_early, + .init_irq = mxc91231_init_irq, + .timer = &zn5_timer, + .init_machine = zn5_init, MACHINE_END diff --git a/arch/arm/mach-mxc91231/mm.c b/arch/arm/mach-mxc91231/mm.c index 7652c301da8..a77f6daf6a2 100644 --- a/arch/arm/mach-mxc91231/mm.c +++ b/arch/arm/mach-mxc91231/mm.c @@ -45,11 +45,14 @@ static struct map_desc mxc91231_io_desc[] __initdata = { */ void __init mxc91231_map_io(void) { - mxc_set_cpu_type(MXC_CPU_MXC91231); - iotable_init(mxc91231_io_desc, ARRAY_SIZE(mxc91231_io_desc)); } +void __init mxc91231_init_early(void) +{ + mxc_set_cpu_type(MXC_CPU_MXC91231); +} + int mxc91231_register_gpios(void); void __init mxc91231_init_irq(void) diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index 4746b9a984a..a22ebe11a60 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -33,6 +33,7 @@ extern void imx35_init_early(void); extern void imx50_init_early(void); extern void imx51_init_early(void); extern void imx53_init_early(void); +extern void mxc91231_init_early(void); extern void mxc_init_irq(void __iomem *); extern void tzic_init_irq(void __iomem *); extern void mx1_init_irq(void); -- cgit v1.2.3-18-g5258 From 4a9cb360197684a861bc06f06d33d5fcc8ffcbf5 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 10 Feb 2011 15:25:18 +0000 Subject: ARM: fixup SMP alternatives in modules With certain configurations, we inline the unlock functions in modules, which results in SMP alternatives being created in modules. We need to fix those up when loading a module to prevent undefined instruction faults. Signed-off-by: Russell King --- arch/arm/kernel/head.S | 38 ++++++++++++++++++++++++++------------ arch/arm/kernel/module.c | 22 +++++++++++++++++++++- 2 files changed, 47 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index c0225da3fb2..f06ff9feb0d 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -391,6 +391,7 @@ ENDPROC(__turn_mmu_on) #ifdef CONFIG_SMP_ON_UP + __INIT __fixup_smp: and r3, r9, #0x000f0000 @ architecture version teq r3, #0x000f0000 @ CPU ID supported? @@ -415,18 +416,7 @@ __fixup_smp_on_up: sub r3, r0, r3 add r4, r4, r3 add r5, r5, r3 -2: cmp r4, r5 - movhs pc, lr - ldmia r4!, {r0, r6} - ARM( str r6, [r0, r3] ) - THUMB( add r0, r0, r3 ) -#ifdef __ARMEB__ - THUMB( mov r6, r6, ror #16 ) @ Convert word order for big-endian. -#endif - THUMB( strh r6, [r0], #2 ) @ For Thumb-2, store as two halfwords - THUMB( mov r6, r6, lsr #16 ) @ to be robust against misaligned r3. - THUMB( strh r6, [r0] ) - b 2b + b __do_fixup_smp_on_up ENDPROC(__fixup_smp) .align @@ -440,7 +430,31 @@ smp_on_up: ALT_SMP(.long 1) ALT_UP(.long 0) .popsection +#endif + .text +__do_fixup_smp_on_up: + cmp r4, r5 + movhs pc, lr + ldmia r4!, {r0, r6} + ARM( str r6, [r0, r3] ) + THUMB( add r0, r0, r3 ) +#ifdef __ARMEB__ + THUMB( mov r6, r6, ror #16 ) @ Convert word order for big-endian. #endif + THUMB( strh r6, [r0], #2 ) @ For Thumb-2, store as two halfwords + THUMB( mov r6, r6, lsr #16 ) @ to be robust against misaligned r3. + THUMB( strh r6, [r0] ) + b __do_fixup_smp_on_up +ENDPROC(__do_fixup_smp_on_up) + +ENTRY(fixup_smp) + stmfd sp!, {r4 - r6, lr} + mov r4, r0 + add r5, r0, r1 + mov r3, #0 + bl __do_fixup_smp_on_up + ldmfd sp!, {r4 - r6, pc} +ENDPROC(fixup_smp) #include "head-common.S" diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index 2cfe8161b47..6d4105e6872 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -22,6 +22,7 @@ #include #include +#include #include #ifdef CONFIG_XIP_KERNEL @@ -268,12 +269,28 @@ struct mod_unwind_map { const Elf_Shdr *txt_sec; }; +static const Elf_Shdr *find_mod_section(const Elf32_Ehdr *hdr, + const Elf_Shdr *sechdrs, const char *name) +{ + const Elf_Shdr *s, *se; + const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; + + for (s = sechdrs, se = sechdrs + hdr->e_shnum; s < se; s++) + if (strcmp(name, secstrs + s->sh_name) == 0) + return s; + + return NULL; +} + +extern void fixup_smp(const void *, unsigned long); + int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs, struct module *mod) { + const Elf_Shdr * __maybe_unused s = NULL; #ifdef CONFIG_ARM_UNWIND const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; - const Elf_Shdr *s, *sechdrs_end = sechdrs + hdr->e_shnum; + const Elf_Shdr *sechdrs_end = sechdrs + hdr->e_shnum; struct mod_unwind_map maps[ARM_SEC_MAX]; int i; @@ -315,6 +332,9 @@ int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs, maps[i].txt_sec->sh_addr, maps[i].txt_sec->sh_size); #endif + s = find_mod_section(hdr, sechdrs, ".alt.smp.init"); + if (s && !is_smp()) + fixup_smp((void *)s->sh_addr, s->sh_size); return 0; } -- cgit v1.2.3-18-g5258 From cb06199b1df492fcfbaedd2256b5054f944b664f Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Wed, 9 Feb 2011 11:35:12 +0100 Subject: ARM: 6654/1: perf/oprofile: fix off-by-one in stack check Since tail is the previous fp - 1, we need to compare the new fp with tail + 1 to ensure that we don't end up passing in the same tail again, in order to avoid a potential infinite loop in the perf interrupt handler (which has been observed to occur). A similar fix seems to be needed in the OProfile code. Acked-by: Will Deacon Signed-off-by: Rabin Vincent Signed-off-by: Russell King --- arch/arm/kernel/perf_event.c | 2 +- arch/arm/oprofile/common.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 5efa2647a2f..d150ad1ccb5 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -700,7 +700,7 @@ user_backtrace(struct frame_tail __user *tail, * Frame pointers should strictly progress back up the stack * (towards higher addresses). */ - if (tail >= buftail.fp) + if (tail + 1 >= buftail.fp) return NULL; return buftail.fp - 1; diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c index 8aa974491df..6adda2b5fa3 100644 --- a/arch/arm/oprofile/common.c +++ b/arch/arm/oprofile/common.c @@ -85,7 +85,7 @@ static struct frame_tail* user_backtrace(struct frame_tail *tail) /* frame pointers should strictly progress back up the stack * (towards higher addresses) */ - if (tail >= buftail[0].fp) + if (tail + 1 >= buftail[0].fp) return NULL; return buftail[0].fp-1; -- cgit v1.2.3-18-g5258 From 917692f5f7ec63de3b093c825913d68e910db282 Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Wed, 9 Feb 2011 12:06:59 +0100 Subject: ARM: 6655/1: Correct WFE() in asm/spinlock.h for Thumb-2 The content for ALT_SMP() in the definition of WFE() expands to 6 bytes (IT cc ; WFEcc.W), which breaks the assumptions of the fixup code, leading to lockups when the affected code gets run. This patch works around the problem by explicitly using an IT + WFEcc.N pair. Signed-off-by: Dave Martin Acked-by: Will Deacon Signed-off-by: Russell King --- arch/arm/include/asm/spinlock.h | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/include/asm/spinlock.h b/arch/arm/include/asm/spinlock.h index da1af524015..fdd3820edff 100644 --- a/arch/arm/include/asm/spinlock.h +++ b/arch/arm/include/asm/spinlock.h @@ -18,7 +18,23 @@ #ifdef CONFIG_THUMB2_KERNEL #define SEV ALT_SMP("sev.w", "nop.w") -#define WFE(cond) ALT_SMP("wfe" cond ".w", "nop.w") +/* + * For Thumb-2, special care is needed to ensure that the conditional WFE + * instruction really does assemble to exactly 4 bytes (as required by + * the SMP_ON_UP fixup code). By itself "wfene" might cause the + * assembler to insert a extra (16-bit) IT instruction, depending on the + * presence or absence of neighbouring conditional instructions. + * + * To avoid this unpredictableness, an approprite IT is inserted explicitly: + * the assembler won't change IT instructions which are explicitly present + * in the input. + */ +#define WFE(cond) ALT_SMP( \ + "it " cond "\n\t" \ + "wfe" cond ".n", \ + \ + "nop.w" \ +) #else #define SEV ALT_SMP("sev", "nop") #define WFE(cond) ALT_SMP("wfe" cond, "nop") -- cgit v1.2.3-18-g5258 From 4c4231ea2f794d73bbb50b8d84e00c66a012a607 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 6 Feb 2011 20:45:52 +0000 Subject: [PARISC] Convert to new irq_chip functions Convert all the parisc driver interrupt handlers (dino, eisa, gsc, iosapic and superio) as well as the cpu interrupts. Prepare show_interrupts for GENERIC_HARDIRQS_NO_DEPRECATED and finally selects that Kconfig option [jejb: compile and testing fixes] Signed-off-by: Thomas Gleixner Signed-off-by: James Bottomley --- arch/parisc/Kconfig | 1 + arch/parisc/include/asm/irq.h | 13 +++------ arch/parisc/kernel/irq.c | 64 +++++++++++++++++++++++++------------------ 3 files changed, 42 insertions(+), 36 deletions(-) (limited to 'arch') diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index fed2946f733..fafdf30bea9 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -15,6 +15,7 @@ config PARISC select HAVE_GENERIC_HARDIRQS select GENERIC_IRQ_PROBE select IRQ_PER_CPU + select GENERIC_HARDIRQS_NO_DEPRECATED help The PA-RISC microprocessor is designed by Hewlett-Packard and used diff --git a/arch/parisc/include/asm/irq.h b/arch/parisc/include/asm/irq.h index c67dccf2e31..1073599a7be 100644 --- a/arch/parisc/include/asm/irq.h +++ b/arch/parisc/include/asm/irq.h @@ -32,15 +32,10 @@ static __inline__ int irq_canonicalize(int irq) } struct irq_chip; +struct irq_data; -/* - * Some useful "we don't have to do anything here" handlers. Should - * probably be provided by the generic code. - */ -void no_ack_irq(unsigned int irq); -void no_end_irq(unsigned int irq); -void cpu_ack_irq(unsigned int irq); -void cpu_eoi_irq(unsigned int irq); +void cpu_ack_irq(struct irq_data *d); +void cpu_eoi_irq(struct irq_data *d); extern int txn_alloc_irq(unsigned int nbits); extern int txn_claim_irq(int); @@ -49,7 +44,7 @@ extern unsigned long txn_alloc_addr(unsigned int); extern unsigned long txn_affinity_addr(unsigned int irq, int cpu); extern int cpu_claim_irq(unsigned int irq, struct irq_chip *, void *); -extern int cpu_check_affinity(unsigned int irq, const struct cpumask *dest); +extern int cpu_check_affinity(struct irq_data *d, const struct cpumask *dest); /* soft power switch support (power.c) */ extern struct tasklet_struct power_tasklet; diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c index 3948f1dd455..cb450e1e79b 100644 --- a/arch/parisc/kernel/irq.c +++ b/arch/parisc/kernel/irq.c @@ -52,9 +52,9 @@ static volatile unsigned long cpu_eiem = 0; */ static DEFINE_PER_CPU(unsigned long, local_ack_eiem) = ~0UL; -static void cpu_mask_irq(unsigned int irq) +static void cpu_mask_irq(struct irq_data *d) { - unsigned long eirr_bit = EIEM_MASK(irq); + unsigned long eirr_bit = EIEM_MASK(d->irq); cpu_eiem &= ~eirr_bit; /* Do nothing on the other CPUs. If they get this interrupt, @@ -63,7 +63,7 @@ static void cpu_mask_irq(unsigned int irq) * then gets disabled */ } -static void cpu_unmask_irq(unsigned int irq) +static void __cpu_unmask_irq(unsigned int irq) { unsigned long eirr_bit = EIEM_MASK(irq); @@ -75,9 +75,14 @@ static void cpu_unmask_irq(unsigned int irq) smp_send_all_nop(); } -void cpu_ack_irq(unsigned int irq) +static void cpu_unmask_irq(struct irq_data *d) +{ + __cpu_unmask_irq(d->irq); +} + +void cpu_ack_irq(struct irq_data *d) { - unsigned long mask = EIEM_MASK(irq); + unsigned long mask = EIEM_MASK(d->irq); int cpu = smp_processor_id(); /* Clear in EIEM so we can no longer process */ @@ -90,9 +95,9 @@ void cpu_ack_irq(unsigned int irq) mtctl(mask, 23); } -void cpu_eoi_irq(unsigned int irq) +void cpu_eoi_irq(struct irq_data *d) { - unsigned long mask = EIEM_MASK(irq); + unsigned long mask = EIEM_MASK(d->irq); int cpu = smp_processor_id(); /* set it in the eiems---it's no longer in process */ @@ -103,15 +108,16 @@ void cpu_eoi_irq(unsigned int irq) } #ifdef CONFIG_SMP -int cpu_check_affinity(unsigned int irq, const struct cpumask *dest) +int cpu_check_affinity(struct irq_data *d, const struct cpumask *dest) { int cpu_dest; /* timer and ipi have to always be received on all CPUs */ - if (CHECK_IRQ_PER_CPU(irq_to_desc(irq)->status)) { + if (CHECK_IRQ_PER_CPU(irq_to_desc(d->irq)->status)) { /* Bad linux design decision. The mask has already - * been set; we must reset it */ - cpumask_setall(irq_desc[irq].affinity); + * been set; we must reset it. Will fix - tglx + */ + cpumask_setall(d->affinity); return -EINVAL; } @@ -121,33 +127,34 @@ int cpu_check_affinity(unsigned int irq, const struct cpumask *dest) return cpu_dest; } -static int cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest) +static int cpu_set_affinity_irq(struct irq_data *d, const struct cpumask *dest, + bool force) { int cpu_dest; - cpu_dest = cpu_check_affinity(irq, dest); + cpu_dest = cpu_check_affinity(d, dest); if (cpu_dest < 0) return -1; - cpumask_copy(irq_desc[irq].affinity, dest); + cpumask_copy(d->affinity, dest); return 0; } #endif static struct irq_chip cpu_interrupt_type = { - .name = "CPU", - .mask = cpu_mask_irq, - .unmask = cpu_unmask_irq, - .ack = cpu_ack_irq, - .eoi = cpu_eoi_irq, + .name = "CPU", + .irq_mask = cpu_mask_irq, + .irq_unmask = cpu_unmask_irq, + .irq_ack = cpu_ack_irq, + .irq_eoi = cpu_eoi_irq, #ifdef CONFIG_SMP - .set_affinity = cpu_set_affinity_irq, + .irq_set_affinity = cpu_set_affinity_irq, #endif /* XXX: Needs to be written. We managed without it so far, but * we really ought to write it. */ - .retrigger = NULL, + .irq_retrigger = NULL, }; int show_interrupts(struct seq_file *p, void *v) @@ -181,7 +188,7 @@ int show_interrupts(struct seq_file *p, void *v) seq_printf(p, "%10u ", kstat_irqs(i)); #endif - seq_printf(p, " %14s", irq_desc[i].chip->name); + seq_printf(p, " %14s", irq_desc[i].irq_data.chip->name); #ifndef PARISC_IRQ_CR16_COUNTS seq_printf(p, " %s", action->name); @@ -233,14 +240,14 @@ int cpu_claim_irq(unsigned int irq, struct irq_chip *type, void *data) { if (irq_desc[irq].action) return -EBUSY; - if (irq_desc[irq].chip != &cpu_interrupt_type) + if (get_irq_chip(irq) != &cpu_interrupt_type) return -EBUSY; /* for iosapic interrupts */ if (type) { set_irq_chip_and_handler(irq, type, handle_percpu_irq); set_irq_chip_data(irq, data); - cpu_unmask_irq(irq); + __cpu_unmask_irq(irq); } return 0; } @@ -289,7 +296,8 @@ int txn_alloc_irq(unsigned int bits_wide) unsigned long txn_affinity_addr(unsigned int irq, int cpu) { #ifdef CONFIG_SMP - cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu)); + struct irq_data *d = irq_get_irq_data(irq); + cpumask_copy(d->affinity, cpumask_of(cpu)); #endif return per_cpu(cpu_data, cpu).txn_addr; @@ -333,6 +341,7 @@ void do_cpu_irq_mask(struct pt_regs *regs) unsigned long eirr_val; int irq, cpu = smp_processor_id(); #ifdef CONFIG_SMP + struct irq_desc *desc; cpumask_t dest; #endif @@ -346,8 +355,9 @@ void do_cpu_irq_mask(struct pt_regs *regs) irq = eirr_to_irq(eirr_val); #ifdef CONFIG_SMP - cpumask_copy(&dest, irq_desc[irq].affinity); - if (CHECK_IRQ_PER_CPU(irq_desc[irq].status) && + desc = irq_to_desc(irq); + cpumask_copy(&dest, desc->irq_data.affinity); + if (CHECK_IRQ_PER_CPU(desc->status) && !cpu_isset(smp_processor_id(), dest)) { int cpu = first_cpu(dest); -- cgit v1.2.3-18-g5258 From 3de04984c62559b7d59ecb3ad010fd148f90f030 Mon Sep 17 00:00:00 2001 From: Thomas Abraham Date: Tue, 25 Jan 2011 08:37:49 +0900 Subject: ARM: S5PV310: Add support System MMU on SMDKV310 The 's5pv310_device_sysmmu' is used on SMDKV310. But since it is not compiled now, there is a build error. To fix this compilation error, S5PV310_DEV_SYSMMU needs to be selected for SMDKV310 board. This patch enables System MMU support on SMDKV310. Signed-off-by: Thomas Abraham [kgene.kim@samsung.com: Adding description] Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pv310/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-s5pv310/Kconfig b/arch/arm/mach-s5pv310/Kconfig index 09c4c21b70c..b2a9acc5185 100644 --- a/arch/arm/mach-s5pv310/Kconfig +++ b/arch/arm/mach-s5pv310/Kconfig @@ -122,6 +122,7 @@ config MACH_SMDKV310 select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 select S5PV310_DEV_PD + select S5PV310_DEV_SYSMMU select S5PV310_SETUP_I2C1 select S5PV310_SETUP_SDHCI help -- cgit v1.2.3-18-g5258 From 401945212b8a5c3a66218771745e6cfca16e5157 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Tue, 1 Feb 2011 15:08:53 +0900 Subject: ARM: S5PV310: Cleanup System MMU This patch cleans following up. - Moved definition of System MMU IPNUM into mach/sysmmu.h - Removed useless SYSMMU_DEBUG configuration - Removed useless header file plat/sysmmu.h Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pv310/include/mach/map.h | 2 -- arch/arm/mach-s5pv310/include/mach/sysmmu.h | 5 ++++- arch/arm/plat-s5p/Kconfig | 24 ++++++++---------------- arch/arm/plat-s5p/Makefile | 2 +- arch/arm/plat-s5p/include/plat/sysmmu.h | 23 ----------------------- arch/arm/plat-s5p/sysmmu.c | 4 +--- 6 files changed, 14 insertions(+), 46 deletions(-) delete mode 100644 arch/arm/plat-s5p/include/plat/sysmmu.h (limited to 'arch') diff --git a/arch/arm/mach-s5pv310/include/mach/map.h b/arch/arm/mach-s5pv310/include/mach/map.h index 74d400625a2..3060f78e12a 100644 --- a/arch/arm/mach-s5pv310/include/mach/map.h +++ b/arch/arm/mach-s5pv310/include/mach/map.h @@ -124,8 +124,6 @@ #define S5PV310_PA_SYSMMU_TV 0x12E20000 #define S5PV310_PA_SYSMMU_MFC_L 0x13620000 #define S5PV310_PA_SYSMMU_MFC_R 0x13630000 -#define S5PV310_SYSMMU_TOTAL_IPNUM 16 -#define S5P_SYSMMU_TOTAL_IPNUM S5PV310_SYSMMU_TOTAL_IPNUM /* compatibiltiy defines. */ #define S3C_PA_UART S5PV310_PA_UART diff --git a/arch/arm/mach-s5pv310/include/mach/sysmmu.h b/arch/arm/mach-s5pv310/include/mach/sysmmu.h index 662fe85ff4d..598fc5c9211 100644 --- a/arch/arm/mach-s5pv310/include/mach/sysmmu.h +++ b/arch/arm/mach-s5pv310/include/mach/sysmmu.h @@ -13,6 +13,9 @@ #ifndef __ASM_ARM_ARCH_SYSMMU_H #define __ASM_ARM_ARCH_SYSMMU_H __FILE__ +#define S5PV310_SYSMMU_TOTAL_IPNUM 16 +#define S5P_SYSMMU_TOTAL_IPNUM S5PV310_SYSMMU_TOTAL_IPNUM + enum s5pv310_sysmmu_ips { SYSMMU_MDMA, SYSMMU_SSS, @@ -32,7 +35,7 @@ enum s5pv310_sysmmu_ips { SYSMMU_MFC_R, }; -static char *sysmmu_ips_name[S5P_SYSMMU_TOTAL_IPNUM] = { +static char *sysmmu_ips_name[S5PV310_SYSMMU_TOTAL_IPNUM] = { "SYSMMU_MDMA" , "SYSMMU_SSS" , "SYSMMU_FIMC0" , diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index deb39951a22..557f8c507f6 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -37,6 +37,14 @@ config S5P_GPIO_INT help Common code for the GPIO interrupts (other than external interrupts.) +comment "System MMU" + +config S5P_SYSTEM_MMU + bool "S5P SYSTEM MMU" + depends on ARCH_S5PV310 + help + Say Y here if you want to enable System MMU + config S5P_DEV_FIMC0 bool help @@ -66,19 +74,3 @@ config S5P_DEV_CSIS1 bool help Compile in platform device definitions for MIPI-CSIS channel 1 - -menuconfig S5P_SYSMMU - bool "SYSMMU support" - depends on ARCH_S5PV310 - help - This is a System MMU driver for Samsung ARM based Soc. - -if S5P_SYSMMU - -config S5P_SYSMMU_DEBUG - bool "Enables debug messages" - depends on S5P_SYSMMU - help - This enables SYSMMU driver debug massages. - -endif diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile index 92efe1adcfd..4bd5cf90897 100644 --- a/arch/arm/plat-s5p/Makefile +++ b/arch/arm/plat-s5p/Makefile @@ -19,6 +19,7 @@ obj-y += clock.o obj-y += irq.o obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o obj-$(CONFIG_S5P_GPIO_INT) += irq-gpioint.o +obj-$(CONFIG_S5P_SYSTEM_MMU) += sysmmu.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_PM) += irq-pm.o @@ -30,4 +31,3 @@ obj-$(CONFIG_S5P_DEV_FIMC2) += dev-fimc2.o obj-$(CONFIG_S5P_DEV_ONENAND) += dev-onenand.o obj-$(CONFIG_S5P_DEV_CSIS0) += dev-csis0.o obj-$(CONFIG_S5P_DEV_CSIS1) += dev-csis1.o -obj-$(CONFIG_S5P_SYSMMU) += sysmmu.o diff --git a/arch/arm/plat-s5p/include/plat/sysmmu.h b/arch/arm/plat-s5p/include/plat/sysmmu.h deleted file mode 100644 index db298fc5438..00000000000 --- a/arch/arm/plat-s5p/include/plat/sysmmu.h +++ /dev/null @@ -1,23 +0,0 @@ -/* linux/arch/arm/plat-s5p/include/plat/sysmmu.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Samsung sysmmu driver - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_PLAT_S5P_SYSMMU_H -#define __ASM_PLAT_S5P_SYSMMU_H __FILE__ - -/* debug macro */ -#ifdef CONFIG_S5P_SYSMMU_DEBUG -#define sysmmu_debug(fmt, arg...) printk(KERN_INFO "[%s] " fmt, __func__, ## arg) -#else -#define sysmmu_debug(fmt, arg...) do { } while (0) -#endif - -#endif /* __ASM_PLAT_S5P_SYSMMU_H */ diff --git a/arch/arm/plat-s5p/sysmmu.c b/arch/arm/plat-s5p/sysmmu.c index d804914dc2e..ffe8a48bc3c 100644 --- a/arch/arm/plat-s5p/sysmmu.c +++ b/arch/arm/plat-s5p/sysmmu.c @@ -16,8 +16,6 @@ #include #include -#include - struct sysmmu_controller s5p_sysmmu_cntlrs[S5P_SYSMMU_TOTAL_IPNUM]; void s5p_sysmmu_register(struct sysmmu_controller *sysmmuconp) @@ -123,7 +121,7 @@ static int s5p_sysmmu_set_tablebase(sysmmu_ips ips) : "=r" (pg) : : "cc"); \ pg &= ~0x3fff; - sysmmu_debug("CP15 TTBR0 : 0x%x\n", pg); + printk(KERN_INFO "%s: CP15 TTBR0 : 0x%x\n", __func__, pg); /* Set sysmmu page table base address */ __raw_writel(pg, sysmmuconp->regs + S5P_PT_BASE_ADDR); -- cgit v1.2.3-18-g5258 From a09e2b21cab92e98728c16f0e6f456f723dadf8b Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 7 Feb 2011 10:51:04 +0900 Subject: ARM: SAMSUNG: Ensure struct sys_device is declared in plat/pm.h Previously we were relying on it being pulled in by other headers for the prototype of s3c24xx_irq_suspend() and s3c24xx_irq_resume(). Signed-off-by: Mark Brown Signed-off-by: Kukjin Kim --- arch/arm/plat-samsung/include/plat/pm.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h index d9025e37767..30518cc9a67 100644 --- a/arch/arm/plat-samsung/include/plat/pm.h +++ b/arch/arm/plat-samsung/include/plat/pm.h @@ -17,6 +17,8 @@ #include +struct sys_device; + #ifdef CONFIG_PM extern __init int s3c_pm_init(void); -- cgit v1.2.3-18-g5258 From 537f5af0f63eea9cd06f477e1c0fe363d1656e08 Mon Sep 17 00:00:00 2001 From: Gary King Date: Tue, 3 Aug 2010 14:53:05 -0700 Subject: ARM: tegra: iomap: Add missing devices Adds gart, hdmi, avp, host1x, and pwm controllers to mach/iomap.h Signed-off-by: Gary King Signed-off-by: Colin Cross --- arch/arm/mach-tegra/include/mach/iomap.h | 33 ++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-tegra/include/mach/iomap.h b/arch/arm/mach-tegra/include/mach/iomap.h index 325eca37348..691cdabd69c 100644 --- a/arch/arm/mach-tegra/include/mach/iomap.h +++ b/arch/arm/mach-tegra/include/mach/iomap.h @@ -26,6 +26,9 @@ #define TEGRA_IRAM_BASE 0x40000000 #define TEGRA_IRAM_SIZE SZ_256K +#define TEGRA_HOST1X_BASE 0x50000000 +#define TEGRA_HOST1X_SIZE 0x24000 + #define TEGRA_ARM_PERIF_BASE 0x50040000 #define TEGRA_ARM_PERIF_SIZE SZ_8K @@ -35,12 +38,30 @@ #define TEGRA_ARM_INT_DIST_BASE 0x50041000 #define TEGRA_ARM_INT_DIST_SIZE SZ_4K +#define TEGRA_MPE_BASE 0x54040000 +#define TEGRA_MPE_SIZE SZ_256K + +#define TEGRA_VI_BASE 0x54080000 +#define TEGRA_VI_SIZE SZ_256K + +#define TEGRA_ISP_BASE 0x54100000 +#define TEGRA_ISP_SIZE SZ_256K + #define TEGRA_DISPLAY_BASE 0x54200000 #define TEGRA_DISPLAY_SIZE SZ_256K #define TEGRA_DISPLAY2_BASE 0x54240000 #define TEGRA_DISPLAY2_SIZE SZ_256K +#define TEGRA_HDMI_BASE 0x54280000 +#define TEGRA_HDMI_SIZE SZ_256K + +#define TEGRA_GART_BASE 0x58000000 +#define TEGRA_GART_SIZE SZ_32M + +#define TEGRA_RES_SEMA_BASE 0x60001000 +#define TEGRA_RES_SEMA_SIZE SZ_4K + #define TEGRA_PRIMARY_ICTLR_BASE 0x60004000 #define TEGRA_PRIMARY_ICTLR_SIZE SZ_64 @@ -140,6 +161,18 @@ #define TEGRA_PWFM_BASE 0x7000A000 #define TEGRA_PWFM_SIZE SZ_256 +#define TEGRA_PWFM0_BASE 0x7000A000 +#define TEGRA_PWFM0_SIZE 4 + +#define TEGRA_PWFM1_BASE 0x7000A010 +#define TEGRA_PWFM1_SIZE 4 + +#define TEGRA_PWFM2_BASE 0x7000A020 +#define TEGRA_PWFM2_SIZE 4 + +#define TEGRA_PWFM3_BASE 0x7000A030 +#define TEGRA_PWFM3_SIZE 4 + #define TEGRA_MIPI_BASE 0x7000B000 #define TEGRA_MIPI_SIZE SZ_256 -- cgit v1.2.3-18-g5258 From 1eb2ecf1d5b3c29ce86f098de4ad21fa757d2160 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Thu, 5 Aug 2010 17:40:39 -0700 Subject: ARM: tegra: cpufreq: Disable cpufreq during suspend On Tegra, calling clk_set_rate on the CPU clock may call into the regulator API. If the regulator driver that controls the CPU voltage rail has been suspended, this can lead to attempted communication with a hardware block that has already been turned off. Adds a SUSPEND_PREPARE notification hook to drop the frequency to the lowest possible during suspend. Also adds 216MHz (off of PLLP) as the lowest CPU frequency, which allows PLLX to be turned off. Signed-off-by: Colin Cross --- arch/arm/mach-tegra/cpu-tegra.c | 75 ++++++++++++++++++++++++++++++++--------- 1 file changed, 60 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/cpu-tegra.c b/arch/arm/mach-tegra/cpu-tegra.c index fea5719c707..ad26a9f3a13 100644 --- a/arch/arm/mach-tegra/cpu-tegra.c +++ b/arch/arm/mach-tegra/cpu-tegra.c @@ -28,6 +28,7 @@ #include #include #include +#include #include @@ -36,14 +37,15 @@ /* Frequency table index must be sequential starting at 0 */ static struct cpufreq_frequency_table freq_table[] = { - { 0, 312000 }, - { 1, 456000 }, - { 2, 608000 }, - { 3, 760000 }, - { 4, 816000 }, - { 5, 912000 }, - { 6, 1000000 }, - { 7, CPUFREQ_TABLE_END }, + { 0, 216000 }, + { 1, 312000 }, + { 2, 456000 }, + { 3, 608000 }, + { 4, 760000 }, + { 5, 816000 }, + { 6, 912000 }, + { 7, 1000000 }, + { 8, CPUFREQ_TABLE_END }, }; #define NUM_CPUS 2 @@ -51,6 +53,8 @@ static struct cpufreq_frequency_table freq_table[] = { static struct clk *cpu_clk; static unsigned long target_cpu_speed[NUM_CPUS]; +static DEFINE_MUTEX(tegra_cpu_lock); +static bool is_suspended; int tegra_verify_speed(struct cpufreq_policy *policy) { @@ -68,16 +72,11 @@ unsigned int tegra_getspeed(unsigned int cpu) return rate; } -static int tegra_update_cpu_speed(void) +static int tegra_update_cpu_speed(unsigned long rate) { - int i; - unsigned long rate = 0; int ret = 0; struct cpufreq_freqs freqs; - for_each_online_cpu(i) - rate = max(rate, target_cpu_speed[i]); - freqs.old = tegra_getspeed(0); freqs.new = rate; @@ -105,12 +104,30 @@ static int tegra_update_cpu_speed(void) return 0; } +static unsigned long tegra_cpu_highest_speed(void) +{ + unsigned long rate = 0; + int i; + + for_each_online_cpu(i) + rate = max(rate, target_cpu_speed[i]); + return rate; +} + static int tegra_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) { int idx; unsigned int freq; + int ret = 0; + + mutex_lock(&tegra_cpu_lock); + + if (is_suspended) { + ret = -EBUSY; + goto out; + } cpufreq_frequency_table_target(policy, freq_table, target_freq, relation, &idx); @@ -119,9 +136,34 @@ static int tegra_target(struct cpufreq_policy *policy, target_cpu_speed[policy->cpu] = freq; - return tegra_update_cpu_speed(); + ret = tegra_update_cpu_speed(tegra_cpu_highest_speed()); + +out: + mutex_unlock(&tegra_cpu_lock); + return ret; } +static int tegra_pm_notify(struct notifier_block *nb, unsigned long event, + void *dummy) +{ + mutex_lock(&tegra_cpu_lock); + if (event == PM_SUSPEND_PREPARE) { + is_suspended = true; + pr_info("Tegra cpufreq suspend: setting frequency to %d kHz\n", + freq_table[0].frequency); + tegra_update_cpu_speed(freq_table[0].frequency); + } else if (event == PM_POST_SUSPEND) { + is_suspended = false; + } + mutex_unlock(&tegra_cpu_lock); + + return NOTIFY_OK; +} + +static struct notifier_block tegra_cpu_pm_notifier = { + .notifier_call = tegra_pm_notify, +}; + static int tegra_cpu_init(struct cpufreq_policy *policy) { if (policy->cpu >= NUM_CPUS) @@ -142,6 +184,9 @@ static int tegra_cpu_init(struct cpufreq_policy *policy) policy->shared_type = CPUFREQ_SHARED_TYPE_ALL; cpumask_copy(policy->related_cpus, cpu_possible_mask); + if (policy->cpu == 0) + register_pm_notifier(&tegra_cpu_pm_notifier); + return 0; } -- cgit v1.2.3-18-g5258 From 699fe145d6e651a814423eeb6125381998f3c077 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Mon, 23 Aug 2010 18:37:25 -0700 Subject: ARM: tegra: Allow overriding arch_reset Signed-off-by: Colin Cross --- arch/arm/mach-tegra/board.h | 2 ++ arch/arm/mach-tegra/common.c | 13 +++++++++++++ arch/arm/mach-tegra/include/mach/system.h | 10 ++-------- 3 files changed, 17 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h index 0de565ca37c..b3f9c94fcb9 100644 --- a/arch/arm/mach-tegra/board.h +++ b/arch/arm/mach-tegra/board.h @@ -23,6 +23,8 @@ #include +void tegra_assert_system_reset(char mode, const char *cmd); + void __init tegra_common_init(void); void __init tegra_map_common_io(void); void __init tegra_init_irq(void); diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c index 7c91e2b9d64..84a7197e1ef 100644 --- a/arch/arm/mach-tegra/common.c +++ b/arch/arm/mach-tegra/common.c @@ -26,11 +26,24 @@ #include #include +#include #include "board.h" #include "clock.h" #include "fuse.h" +void (*arch_reset)(char mode, const char *cmd) = tegra_assert_system_reset; + +void tegra_assert_system_reset(char mode, const char *cmd) +{ + void __iomem *reset = IO_ADDRESS(TEGRA_CLK_RESET_BASE + 0x04); + u32 reg; + + reg = readl(reset); + reg |= 0x04; + writel(reg, reset); +} + static __initdata struct tegra_clk_init_table common_clk_init_table[] = { /* name parent rate enabled */ { "clk_m", NULL, 0, true }, diff --git a/arch/arm/mach-tegra/include/mach/system.h b/arch/arm/mach-tegra/include/mach/system.h index 84d5d46113f..d0183d876c3 100644 --- a/arch/arm/mach-tegra/include/mach/system.h +++ b/arch/arm/mach-tegra/include/mach/system.h @@ -24,16 +24,10 @@ #include #include -static inline void arch_idle(void) -{ -} +extern void (*arch_reset)(char mode, const char *cmd); -static inline void arch_reset(char mode, const char *cmd) +static inline void arch_idle(void) { - void __iomem *reset = IO_ADDRESS(TEGRA_CLK_RESET_BASE + 0x04); - u32 reg = readl(reset); - reg |= 0x04; - writel(reg, reset); } #endif -- cgit v1.2.3-18-g5258 From 5789fee934278dd6f4c541db97de229bd4a76424 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Wed, 18 Aug 2010 00:19:12 -0700 Subject: ARM: tegra: dma: Fix critical data corruption bugs Sometimes, due to high interrupt latency in the continuous mode of DMA transfer, the half buffer complete interrupt is handled after DMA has transferred the full buffer. When this is detected, stop DMA immediately and restart with the next buffer if the next buffer is ready. originally fixed by Victor(Weiguo) Pan In place of using the simple spin_lock()/spi_unlock() in the interrupt thread, using the spin_lock_irqsave() and spin_unlock_irqrestore(). The lock is shared between the normal process context and interrupt context. originally fixed by Laxman Dewangan (ldewangan@nvidia.com) The use of shadow registers caused memory corruption at physical address 0 because the enable bit was not shadowed, and assuming it needed to be set would enable an unconfigured dma block. Most of the register accesses don't need to know the previous state of the registers, and the few places that do need to modify only a few bits in the registers are the same ones that were sometimes incorrectly setting the enable bit. This patch convert tegra_dma_update_hardware to set the entire register, and the other users to read-modify-write, and drops the shadow registers completely. Also fixes missing locking in tegra_dma_allocate_channel Signed-off-by: Colin Cross --- arch/arm/mach-tegra/dma.c | 197 +++++++++++++++++++++++++--------------------- 1 file changed, 108 insertions(+), 89 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/dma.c b/arch/arm/mach-tegra/dma.c index a2a252db024..250bc7baa00 100644 --- a/arch/arm/mach-tegra/dma.c +++ b/arch/arm/mach-tegra/dma.c @@ -121,17 +121,13 @@ struct tegra_dma_channel { void __iomem *addr; int mode; int irq; - - /* Register shadow */ - u32 csr; - u32 ahb_seq; - u32 ahb_ptr; - u32 apb_seq; - u32 apb_ptr; + int req_transfer_count; }; #define NV_DMA_MAX_CHANNELS 32 +static DEFINE_MUTEX(tegra_dma_lock); + static DECLARE_BITMAP(channel_usage, NV_DMA_MAX_CHANNELS); static struct tegra_dma_channel dma_channels[NV_DMA_MAX_CHANNELS]; @@ -139,7 +135,6 @@ static void tegra_dma_update_hw(struct tegra_dma_channel *ch, struct tegra_dma_req *req); static void tegra_dma_update_hw_partial(struct tegra_dma_channel *ch, struct tegra_dma_req *req); -static void tegra_dma_init_hw(struct tegra_dma_channel *ch); static void tegra_dma_stop(struct tegra_dma_channel *ch); void tegra_dma_flush(struct tegra_dma_channel *ch) @@ -151,6 +146,9 @@ void tegra_dma_dequeue(struct tegra_dma_channel *ch) { struct tegra_dma_req *req; + if (tegra_dma_is_empty(ch)) + return; + req = list_entry(ch->list.next, typeof(*req), node); tegra_dma_dequeue_req(ch, req); @@ -159,10 +157,10 @@ void tegra_dma_dequeue(struct tegra_dma_channel *ch) void tegra_dma_stop(struct tegra_dma_channel *ch) { - unsigned int csr; - unsigned int status; + u32 csr; + u32 status; - csr = ch->csr; + csr = readl(ch->addr + APB_DMA_CHAN_CSR); csr &= ~CSR_IE_EOC; writel(csr, ch->addr + APB_DMA_CHAN_CSR); @@ -176,19 +174,16 @@ void tegra_dma_stop(struct tegra_dma_channel *ch) int tegra_dma_cancel(struct tegra_dma_channel *ch) { - unsigned int csr; + u32 csr; unsigned long irq_flags; spin_lock_irqsave(&ch->lock, irq_flags); while (!list_empty(&ch->list)) list_del(ch->list.next); - csr = ch->csr; + csr = readl(ch->addr + APB_DMA_CHAN_CSR); csr &= ~CSR_REQ_SEL_MASK; csr |= CSR_REQ_SEL_INVALID; - - /* Set the enable as that is not shadowed */ - csr |= CSR_ENB; writel(csr, ch->addr + APB_DMA_CHAN_CSR); tegra_dma_stop(ch); @@ -230,18 +225,15 @@ int tegra_dma_dequeue_req(struct tegra_dma_channel *ch, * - Finally stop or program the DMA to the next buffer in the * list. */ - csr = ch->csr; + csr = readl(ch->addr + APB_DMA_CHAN_CSR); csr &= ~CSR_REQ_SEL_MASK; csr |= CSR_REQ_SEL_INVALID; - - /* Set the enable as that is not shadowed */ - csr |= CSR_ENB; writel(csr, ch->addr + APB_DMA_CHAN_CSR); /* Get the transfer count */ status = readl(ch->addr + APB_DMA_CHAN_STA); to_transfer = (status & STA_COUNT_MASK) >> STA_COUNT_SHIFT; - req_transfer_count = (ch->csr & CSR_WCOUNT_MASK) >> CSR_WCOUNT_SHIFT; + req_transfer_count = ch->req_transfer_count; req_transfer_count += 1; to_transfer += 1; @@ -349,7 +341,9 @@ EXPORT_SYMBOL(tegra_dma_enqueue_req); struct tegra_dma_channel *tegra_dma_allocate_channel(int mode) { int channel; - struct tegra_dma_channel *ch; + struct tegra_dma_channel *ch = NULL; + + mutex_lock(&tegra_dma_lock); /* first channel is the shared channel */ if (mode & TEGRA_DMA_SHARED) { @@ -358,11 +352,14 @@ struct tegra_dma_channel *tegra_dma_allocate_channel(int mode) channel = find_first_zero_bit(channel_usage, ARRAY_SIZE(dma_channels)); if (channel >= ARRAY_SIZE(dma_channels)) - return NULL; + goto out; } __set_bit(channel, channel_usage); ch = &dma_channels[channel]; ch->mode = mode; + +out: + mutex_unlock(&tegra_dma_lock); return ch; } EXPORT_SYMBOL(tegra_dma_allocate_channel); @@ -372,22 +369,27 @@ void tegra_dma_free_channel(struct tegra_dma_channel *ch) if (ch->mode & TEGRA_DMA_SHARED) return; tegra_dma_cancel(ch); + mutex_lock(&tegra_dma_lock); __clear_bit(ch->id, channel_usage); + mutex_unlock(&tegra_dma_lock); } EXPORT_SYMBOL(tegra_dma_free_channel); static void tegra_dma_update_hw_partial(struct tegra_dma_channel *ch, struct tegra_dma_req *req) { + u32 apb_ptr; + u32 ahb_ptr; + if (req->to_memory) { - ch->apb_ptr = req->source_addr; - ch->ahb_ptr = req->dest_addr; + apb_ptr = req->source_addr; + ahb_ptr = req->dest_addr; } else { - ch->apb_ptr = req->dest_addr; - ch->ahb_ptr = req->source_addr; + apb_ptr = req->dest_addr; + ahb_ptr = req->source_addr; } - writel(ch->apb_ptr, ch->addr + APB_DMA_CHAN_APB_PTR); - writel(ch->ahb_ptr, ch->addr + APB_DMA_CHAN_AHB_PTR); + writel(apb_ptr, ch->addr + APB_DMA_CHAN_APB_PTR); + writel(ahb_ptr, ch->addr + APB_DMA_CHAN_AHB_PTR); req->status = TEGRA_DMA_REQ_INFLIGHT; return; @@ -401,38 +403,39 @@ static void tegra_dma_update_hw(struct tegra_dma_channel *ch, int ahb_bus_width; int apb_bus_width; int index; - unsigned long csr; + u32 ahb_seq; + u32 apb_seq; + u32 ahb_ptr; + u32 apb_ptr; + u32 csr; + + csr = CSR_IE_EOC | CSR_FLOW; + ahb_seq = AHB_SEQ_INTR_ENB | AHB_SEQ_BURST_1; + apb_seq = 0; - ch->csr |= CSR_FLOW; - ch->csr &= ~CSR_REQ_SEL_MASK; - ch->csr |= req->req_sel << CSR_REQ_SEL_SHIFT; - ch->ahb_seq &= ~AHB_SEQ_BURST_MASK; - ch->ahb_seq |= AHB_SEQ_BURST_1; + csr |= req->req_sel << CSR_REQ_SEL_SHIFT; /* One shot mode is always single buffered, * continuous mode is always double buffered * */ if (ch->mode & TEGRA_DMA_MODE_ONESHOT) { - ch->csr |= CSR_ONCE; - ch->ahb_seq &= ~AHB_SEQ_DBL_BUF; - ch->csr &= ~CSR_WCOUNT_MASK; - ch->csr |= ((req->size>>2) - 1) << CSR_WCOUNT_SHIFT; + csr |= CSR_ONCE; + ch->req_transfer_count = (req->size >> 2) - 1; } else { - ch->csr &= ~CSR_ONCE; - ch->ahb_seq |= AHB_SEQ_DBL_BUF; + ahb_seq |= AHB_SEQ_DBL_BUF; /* In double buffered mode, we set the size to half the * requested size and interrupt when half the buffer * is full */ - ch->csr &= ~CSR_WCOUNT_MASK; - ch->csr |= ((req->size>>3) - 1) << CSR_WCOUNT_SHIFT; + ch->req_transfer_count = (req->size >> 3) - 1; } + csr |= ch->req_transfer_count << CSR_WCOUNT_SHIFT; + if (req->to_memory) { - ch->csr &= ~CSR_DIR; - ch->apb_ptr = req->source_addr; - ch->ahb_ptr = req->dest_addr; + apb_ptr = req->source_addr; + ahb_ptr = req->dest_addr; apb_addr_wrap = req->source_wrap; ahb_addr_wrap = req->dest_wrap; @@ -440,9 +443,9 @@ static void tegra_dma_update_hw(struct tegra_dma_channel *ch, ahb_bus_width = req->dest_bus_width; } else { - ch->csr |= CSR_DIR; - ch->apb_ptr = req->dest_addr; - ch->ahb_ptr = req->source_addr; + csr |= CSR_DIR; + apb_ptr = req->dest_addr; + ahb_ptr = req->source_addr; apb_addr_wrap = req->dest_wrap; ahb_addr_wrap = req->source_wrap; @@ -461,8 +464,7 @@ static void tegra_dma_update_hw(struct tegra_dma_channel *ch, index++; } while (index < ARRAY_SIZE(apb_addr_wrap_table)); BUG_ON(index == ARRAY_SIZE(apb_addr_wrap_table)); - ch->apb_seq &= ~APB_SEQ_WRAP_MASK; - ch->apb_seq |= index << APB_SEQ_WRAP_SHIFT; + apb_seq |= index << APB_SEQ_WRAP_SHIFT; /* set address wrap for AHB size */ index = 0; @@ -472,55 +474,42 @@ static void tegra_dma_update_hw(struct tegra_dma_channel *ch, index++; } while (index < ARRAY_SIZE(ahb_addr_wrap_table)); BUG_ON(index == ARRAY_SIZE(ahb_addr_wrap_table)); - ch->ahb_seq &= ~AHB_SEQ_WRAP_MASK; - ch->ahb_seq |= index << AHB_SEQ_WRAP_SHIFT; + ahb_seq |= index << AHB_SEQ_WRAP_SHIFT; for (index = 0; index < ARRAY_SIZE(bus_width_table); index++) { if (bus_width_table[index] == ahb_bus_width) break; } BUG_ON(index == ARRAY_SIZE(bus_width_table)); - ch->ahb_seq &= ~AHB_SEQ_BUS_WIDTH_MASK; - ch->ahb_seq |= index << AHB_SEQ_BUS_WIDTH_SHIFT; + ahb_seq |= index << AHB_SEQ_BUS_WIDTH_SHIFT; for (index = 0; index < ARRAY_SIZE(bus_width_table); index++) { if (bus_width_table[index] == apb_bus_width) break; } BUG_ON(index == ARRAY_SIZE(bus_width_table)); - ch->apb_seq &= ~APB_SEQ_BUS_WIDTH_MASK; - ch->apb_seq |= index << APB_SEQ_BUS_WIDTH_SHIFT; - - ch->csr |= CSR_IE_EOC; + apb_seq |= index << APB_SEQ_BUS_WIDTH_SHIFT; - /* update hw registers with the shadow */ - writel(ch->csr, ch->addr + APB_DMA_CHAN_CSR); - writel(ch->apb_seq, ch->addr + APB_DMA_CHAN_APB_SEQ); - writel(ch->apb_ptr, ch->addr + APB_DMA_CHAN_APB_PTR); - writel(ch->ahb_seq, ch->addr + APB_DMA_CHAN_AHB_SEQ); - writel(ch->ahb_ptr, ch->addr + APB_DMA_CHAN_AHB_PTR); + writel(csr, ch->addr + APB_DMA_CHAN_CSR); + writel(apb_seq, ch->addr + APB_DMA_CHAN_APB_SEQ); + writel(apb_ptr, ch->addr + APB_DMA_CHAN_APB_PTR); + writel(ahb_seq, ch->addr + APB_DMA_CHAN_AHB_SEQ); + writel(ahb_ptr, ch->addr + APB_DMA_CHAN_AHB_PTR); - csr = ch->csr | CSR_ENB; + csr |= CSR_ENB; writel(csr, ch->addr + APB_DMA_CHAN_CSR); req->status = TEGRA_DMA_REQ_INFLIGHT; } -static void tegra_dma_init_hw(struct tegra_dma_channel *ch) -{ - /* One shot with an interrupt to CPU after transfer */ - ch->csr = CSR_ONCE | CSR_IE_EOC; - ch->ahb_seq = AHB_SEQ_BUS_WIDTH_32 | AHB_SEQ_INTR_ENB; - ch->apb_seq = APB_SEQ_BUS_WIDTH_32 | 1 << APB_SEQ_WRAP_SHIFT; -} - static void handle_oneshot_dma(struct tegra_dma_channel *ch) { struct tegra_dma_req *req; + unsigned long irq_flags; - spin_lock(&ch->lock); + spin_lock_irqsave(&ch->lock, irq_flags); if (list_empty(&ch->list)) { - spin_unlock(&ch->lock); + spin_unlock_irqrestore(&ch->lock, irq_flags); return; } @@ -528,8 +517,7 @@ static void handle_oneshot_dma(struct tegra_dma_channel *ch) if (req) { int bytes_transferred; - bytes_transferred = - (ch->csr & CSR_WCOUNT_MASK) >> CSR_WCOUNT_SHIFT; + bytes_transferred = ch->req_transfer_count; bytes_transferred += 1; bytes_transferred <<= 2; @@ -537,12 +525,12 @@ static void handle_oneshot_dma(struct tegra_dma_channel *ch) req->bytes_transferred = bytes_transferred; req->status = TEGRA_DMA_REQ_SUCCESS; - spin_unlock(&ch->lock); + spin_unlock_irqrestore(&ch->lock, irq_flags); /* Callback should be called without any lock */ pr_debug("%s: transferred %d bytes\n", __func__, req->bytes_transferred); req->complete(req); - spin_lock(&ch->lock); + spin_lock_irqsave(&ch->lock, irq_flags); } if (!list_empty(&ch->list)) { @@ -552,22 +540,55 @@ static void handle_oneshot_dma(struct tegra_dma_channel *ch) if (req->status != TEGRA_DMA_REQ_INFLIGHT) tegra_dma_update_hw(ch, req); } - spin_unlock(&ch->lock); + spin_unlock_irqrestore(&ch->lock, irq_flags); } static void handle_continuous_dma(struct tegra_dma_channel *ch) { struct tegra_dma_req *req; + unsigned long irq_flags; - spin_lock(&ch->lock); + spin_lock_irqsave(&ch->lock, irq_flags); if (list_empty(&ch->list)) { - spin_unlock(&ch->lock); + spin_unlock_irqrestore(&ch->lock, irq_flags); return; } req = list_entry(ch->list.next, typeof(*req), node); if (req) { if (req->buffer_status == TEGRA_DMA_REQ_BUF_STATUS_EMPTY) { + bool is_dma_ping_complete; + is_dma_ping_complete = (readl(ch->addr + APB_DMA_CHAN_STA) + & STA_PING_PONG) ? true : false; + if (req->to_memory) + is_dma_ping_complete = !is_dma_ping_complete; + /* Out of sync - Release current buffer */ + if (!is_dma_ping_complete) { + int bytes_transferred; + + bytes_transferred = ch->req_transfer_count; + bytes_transferred += 1; + bytes_transferred <<= 3; + req->buffer_status = TEGRA_DMA_REQ_BUF_STATUS_FULL; + req->bytes_transferred = bytes_transferred; + req->status = TEGRA_DMA_REQ_SUCCESS; + tegra_dma_stop(ch); + + if (!list_is_last(&req->node, &ch->list)) { + struct tegra_dma_req *next_req; + + next_req = list_entry(req->node.next, + typeof(*next_req), node); + tegra_dma_update_hw(ch, next_req); + } + + list_del(&req->node); + + /* DMA lock is NOT held when callbak is called */ + spin_unlock_irqrestore(&ch->lock, irq_flags); + req->complete(req); + return; + } /* Load the next request into the hardware, if available * */ if (!list_is_last(&req->node, &ch->list)) { @@ -580,7 +601,7 @@ static void handle_continuous_dma(struct tegra_dma_channel *ch) req->buffer_status = TEGRA_DMA_REQ_BUF_STATUS_HALF_FULL; req->status = TEGRA_DMA_REQ_SUCCESS; /* DMA lock is NOT held when callback is called */ - spin_unlock(&ch->lock); + spin_unlock_irqrestore(&ch->lock, irq_flags); if (likely(req->threshold)) req->threshold(req); return; @@ -591,8 +612,7 @@ static void handle_continuous_dma(struct tegra_dma_channel *ch) * the second interrupt */ int bytes_transferred; - bytes_transferred = - (ch->csr & CSR_WCOUNT_MASK) >> CSR_WCOUNT_SHIFT; + bytes_transferred = ch->req_transfer_count; bytes_transferred += 1; bytes_transferred <<= 3; @@ -602,7 +622,7 @@ static void handle_continuous_dma(struct tegra_dma_channel *ch) list_del(&req->node); /* DMA lock is NOT held when callbak is called */ - spin_unlock(&ch->lock); + spin_unlock_irqrestore(&ch->lock, irq_flags); req->complete(req); return; @@ -610,7 +630,7 @@ static void handle_continuous_dma(struct tegra_dma_channel *ch) BUG(); } } - spin_unlock(&ch->lock); + spin_unlock_irqrestore(&ch->lock, irq_flags); } static irqreturn_t dma_isr(int irq, void *data) @@ -674,7 +694,6 @@ int __init tegra_dma_init(void) spin_lock_init(&ch->lock); INIT_LIST_HEAD(&ch->list); - tegra_dma_init_hw(ch); irq = INT_APB_DMA_CH0 + i; ret = request_threaded_irq(irq, dma_isr, dma_thread_fn, 0, -- cgit v1.2.3-18-g5258 From f2b6133ffc05cdfd12ac41cda5eb5d8e55990365 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Wed, 5 Jan 2011 14:03:12 -0600 Subject: ARM: tegra: add tegra_defconfig Adding one single defconfig for the tegra family of boards, to over time cover the superset of supported platform and drivers. Signed-off-by: Olof Johansson Signed-off-by: Colin Cross --- arch/arm/configs/tegra_defconfig | 123 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 123 insertions(+) create mode 100644 arch/arm/configs/tegra_defconfig (limited to 'arch') diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig new file mode 100644 index 00000000000..7a9267e5da5 --- /dev/null +++ b/arch/arm/configs/tegra_defconfig @@ -0,0 +1,123 @@ +CONFIG_EXPERIMENTAL=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_CGROUPS=y +CONFIG_CGROUP_DEBUG=y +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_RESOURCE_COUNTERS=y +CONFIG_CGROUP_SCHED=y +CONFIG_RT_GROUP_SCHED=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_EMBEDDED=y +# CONFIG_SYSCTL_SYSCALL is not set +# CONFIG_ELF_CORE is not set +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_TEGRA=y +CONFIG_MACH_HARMONY=y +CONFIG_TEGRA_DEBUG_UARTD=y +CONFIG_ARM_ERRATA_742230=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_PREEMPT=y +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_HIGHMEM=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_VFP=y +CONFIG_PM=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_NET_KEY=y +CONFIG_INET=y +CONFIG_INET_ESP=y +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +CONFIG_IPV6=y +CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_OPTIMISTIC_DAD=y +CONFIG_INET6_AH=y +CONFIG_INET6_ESP=y +CONFIG_INET6_IPCOMP=y +CONFIG_IPV6_MIP6=y +CONFIG_IPV6_TUNNEL=y +CONFIG_IPV6_MULTIPLE_TABLES=y +# CONFIG_WIRELESS is not set +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_MISC_DEVICES=y +CONFIG_AD525X_DPOT=y +CONFIG_AD525X_DPOT_I2C=y +CONFIG_ICS932S401=y +CONFIG_APDS9802ALS=y +CONFIG_ISL29003=y +CONFIG_NETDEVICES=y +CONFIG_DUMMY=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set +# CONFIG_INPUT is not set +# CONFIG_SERIO is not set +# CONFIG_VT is not set +# CONFIG_DEVKMEM is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +# CONFIG_HWMON is not set +# CONFIG_MFD_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +# CONFIG_DNOTIFY is not set +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +CONFIG_PRINTK_TIME=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_SCHEDSTATS=y +CONFIG_TIMER_STATS=y +CONFIG_DEBUG_SLAB=y +# CONFIG_DEBUG_PREEMPT is not set +CONFIG_DEBUG_MUTEXES=y +CONFIG_DEBUG_SPINLOCK_SLEEP=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_VM=y +CONFIG_DEBUG_SG=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_DEBUG_LL=y +CONFIG_EARLY_PRINTK=y +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_AES=y +CONFIG_CRYPTO_ARC4=y +CONFIG_CRYPTO_TWOFISH=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y -- cgit v1.2.3-18-g5258 From 535371c3fba22b414dbbe25b93fbddbd471c772a Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Sat, 22 Jan 2011 00:36:14 -0800 Subject: ARM: tegra: Use writel_relaxed in tegra_init_cache Signed-off-by: Colin Cross --- arch/arm/mach-tegra/common.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c index 84a7197e1ef..34559d15782 100644 --- a/arch/arm/mach-tegra/common.c +++ b/arch/arm/mach-tegra/common.c @@ -63,8 +63,8 @@ void __init tegra_init_cache(void) #ifdef CONFIG_CACHE_L2X0 void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000; - writel(0x331, p + L2X0_TAG_LATENCY_CTRL); - writel(0x441, p + L2X0_DATA_LATENCY_CTRL); + writel_relaxed(0x331, p + L2X0_TAG_LATENCY_CTRL); + writel_relaxed(0x441, p + L2X0_DATA_LATENCY_CTRL); l2x0_init(p, 0x6C080001, 0x8200c3fe); #endif -- cgit v1.2.3-18-g5258 From cca414b263d5544f6bb4bff3cd3d3130def2b530 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Mon, 7 Feb 2011 10:10:53 +0200 Subject: ARM: tegra: add TrimSlice board Add basic support for CompuLab TrimSlice platform Signed-off-by: Mike Rapoport Signed-off-by: Colin Cross --- arch/arm/mach-tegra/Kconfig | 6 ++ arch/arm/mach-tegra/Makefile | 3 + arch/arm/mach-tegra/board-trimslice-pinmux.c | 145 +++++++++++++++++++++++++++ arch/arm/mach-tegra/board-trimslice.c | 104 +++++++++++++++++++ arch/arm/mach-tegra/board-trimslice.h | 22 ++++ 5 files changed, 280 insertions(+) create mode 100644 arch/arm/mach-tegra/board-trimslice-pinmux.c create mode 100644 arch/arm/mach-tegra/board-trimslice.c create mode 100644 arch/arm/mach-tegra/board-trimslice.h (limited to 'arch') diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index acd9552f8ad..f0fda77395e 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -27,6 +27,12 @@ config MACH_HARMONY help Support for nVidia Harmony development platform +config MACH_TRIMSLICE + bool "TrimSlice board" + select TEGRA_PCI + help + Support for CompuLab TrimSlice platform + choice prompt "Low-level debug console UART" default TEGRA_DEBUG_UART_NONE diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index 00a6ba348d9..6b537de5a38 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -20,3 +20,6 @@ obj-$(CONFIG_TEGRA_PCI) += pcie.o obj-${CONFIG_MACH_HARMONY} += board-harmony.o obj-${CONFIG_MACH_HARMONY} += board-harmony-pinmux.o obj-${CONFIG_MACH_HARMONY} += board-harmony-pcie.o + +obj-${CONFIG_MACH_TRIMSLICE} += board-trimslice.o +obj-${CONFIG_MACH_TRIMSLICE} += board-trimslice-pinmux.o diff --git a/arch/arm/mach-tegra/board-trimslice-pinmux.c b/arch/arm/mach-tegra/board-trimslice-pinmux.c new file mode 100644 index 00000000000..6d4fc9f7f1f --- /dev/null +++ b/arch/arm/mach-tegra/board-trimslice-pinmux.c @@ -0,0 +1,145 @@ +/* + * arch/arm/mach-tegra/board-trimslice-pinmux.c + * + * Copyright (C) 2011 CompuLab, Ltd. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include + +#include "board-trimslice.h" + +static __initdata struct tegra_pingroup_config trimslice_pinmux[] = { + {TEGRA_PINGROUP_ATA, TEGRA_MUX_IDE, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_ATB, TEGRA_MUX_SDIO4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_ATC, TEGRA_MUX_NAND, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_ATD, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_ATE, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_CDEV1, TEGRA_MUX_OSC, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_CDEV2, TEGRA_MUX_PLLP_OUT4, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_CRTP, TEGRA_MUX_CRT, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_CSUS, TEGRA_MUX_VI_SENSOR_CLK, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_DAP1, TEGRA_MUX_DAP1, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_DAP2, TEGRA_MUX_DAP2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_DAP3, TEGRA_MUX_DAP3, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_DAP4, TEGRA_MUX_DAP4, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_DDC, TEGRA_MUX_I2C2, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_DTA, TEGRA_MUX_VI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_DTB, TEGRA_MUX_VI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_DTC, TEGRA_MUX_VI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_DTD, TEGRA_MUX_VI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_DTE, TEGRA_MUX_VI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_DTF, TEGRA_MUX_I2C3, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_GMA, TEGRA_MUX_SDIO4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_GMB, TEGRA_MUX_NAND, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_GMC, TEGRA_MUX_SFLASH, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_GMD, TEGRA_MUX_SFLASH, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_GME, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_GPU, TEGRA_MUX_UARTA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_GPU7, TEGRA_MUX_RTCK, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_GPV, TEGRA_MUX_PCIE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_HDINT, TEGRA_MUX_HDMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_I2CP, TEGRA_MUX_I2C, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_IRRX, TEGRA_MUX_UARTB, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_IRTX, TEGRA_MUX_UARTB, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_KBCA, TEGRA_MUX_KBC, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_KBCB, TEGRA_MUX_KBC, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_KBCC, TEGRA_MUX_KBC, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_KBCD, TEGRA_MUX_KBC, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_KBCE, TEGRA_MUX_KBC, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_KBCF, TEGRA_MUX_KBC, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LCSN, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LD0, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD1, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD2, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD3, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD4, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD5, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD6, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD7, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD8, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD9, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD10, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD11, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD12, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD13, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD14, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD15, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD16, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD17, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LDC, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LDI, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LHP0, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LHP1, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LHP2, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LHS, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LM0, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LM1, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LPP, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LPW0, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LPW1, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LPW2, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LSC0, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LSC1, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LSCK, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LSDA, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LSDI, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LSPI, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LVP0, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LVP1, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LVS, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_OWC, TEGRA_MUX_RSVD2, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_PMC, TEGRA_MUX_PWR_ON, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_PTA, TEGRA_MUX_RSVD3, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_RM, TEGRA_MUX_I2C, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_SDB, TEGRA_MUX_PWM, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_SDC, TEGRA_MUX_PWM, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_SDD, TEGRA_MUX_PWM, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_SDIO1, TEGRA_MUX_SDIO1, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_SLXA, TEGRA_MUX_PCIE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_SLXC, TEGRA_MUX_SDIO3, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SLXD, TEGRA_MUX_SDIO3, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SLXK, TEGRA_MUX_PCIE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_SPDI, TEGRA_MUX_SPDIF, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SPDO, TEGRA_MUX_SPDIF, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SPIA, TEGRA_MUX_SPI2, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SPIB, TEGRA_MUX_SPI2, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SPIC, TEGRA_MUX_SPI2, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SPID, TEGRA_MUX_SPI1, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SPIE, TEGRA_MUX_SPI1, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SPIF, TEGRA_MUX_SPI1, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SPIG, TEGRA_MUX_SPI2_ALT, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SPIH, TEGRA_MUX_SPI2_ALT, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_UAA, TEGRA_MUX_ULPI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_UAB, TEGRA_MUX_ULPI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_UAC, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_UAD, TEGRA_MUX_IRDA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_UCA, TEGRA_MUX_UARTC, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_UCB, TEGRA_MUX_UARTC, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_UDA, TEGRA_MUX_ULPI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_CK32, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_DDRC, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_PMCA, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_PMCB, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_PMCC, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_PMCD, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_PMCE, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_XM2C, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, +}; + +void __init trimslice_pinmux_init(void) +{ + tegra_pinmux_config_table(trimslice_pinmux, ARRAY_SIZE(trimslice_pinmux)); +} diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c new file mode 100644 index 00000000000..ef233b28022 --- /dev/null +++ b/arch/arm/mach-tegra/board-trimslice.c @@ -0,0 +1,104 @@ +/* + * arch/arm/mach-tegra/board-trimslice.c + * + * Copyright (C) 2011 CompuLab, Ltd. + * Author: Mike Rapoport + * + * Based on board-harmony.c + * Copyright (C) 2010 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include + +#include +#include +#include + +#include + +#include "board.h" +#include "clock.h" + +#include "board-trimslice.h" + +static struct plat_serial8250_port debug_uart_platform_data[] = { + { + .membase = IO_ADDRESS(TEGRA_UARTA_BASE), + .mapbase = TEGRA_UARTA_BASE, + .irq = INT_UARTA, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = 216000000, + }, { + .flags = 0 + } +}; + +static struct platform_device debug_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = debug_uart_platform_data, + }, +}; + +static struct platform_device *trimslice_devices[] __initdata = { + &debug_uart, +}; + +static void __init tegra_trimslice_fixup(struct machine_desc *desc, + struct tag *tags, char **cmdline, struct meminfo *mi) +{ + mi->nr_banks = 2; + mi->bank[0].start = PHYS_OFFSET; + mi->bank[0].size = 448 * SZ_1M; + mi->bank[1].start = SZ_512M; + mi->bank[1].size = SZ_512M; +} + +static __initdata struct tegra_clk_init_table trimslice_clk_init_table[] = { + /* name parent rate enabled */ + { "uarta", "pll_p", 216000000, true }, + { NULL, NULL, 0, 0}, +}; + +static int __init tegra_trimslice_pci_init(void) +{ + return tegra_pcie_init(true, true); +} +subsys_initcall(tegra_trimslice_pci_init); + +static void __init tegra_trimslice_init(void) +{ + tegra_common_init(); + + tegra_clk_init_from_table(trimslice_clk_init_table); + + trimslice_pinmux_init(); + + platform_add_devices(trimslice_devices, ARRAY_SIZE(trimslice_devices)); +} + +MACHINE_START(TRIMSLICE, "trimslice") + .boot_params = 0x00000100, + .fixup = tegra_trimslice_fixup, + .init_irq = tegra_init_irq, + .init_machine = tegra_trimslice_init, + .map_io = tegra_map_common_io, + .timer = &tegra_timer, +MACHINE_END diff --git a/arch/arm/mach-tegra/board-trimslice.h b/arch/arm/mach-tegra/board-trimslice.h new file mode 100644 index 00000000000..16ec0f0d3bb --- /dev/null +++ b/arch/arm/mach-tegra/board-trimslice.h @@ -0,0 +1,22 @@ +/* + * arch/arm/mach-tegra/board-trimslice.h + * + * Copyright (C) 2011 CompuLab, Ltd. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef _MACH_TEGRA_BOARD_TRIMSLICE_H +#define _MACH_TEGRA_BOARD_TRIMSLICE_H + +void trimslice_pinmux_init(void); + +#endif -- cgit v1.2.3-18-g5258 From cb07625d1f84fb48e6849cb530762ffcc6f8e458 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 3 Jan 2011 10:33:01 +0100 Subject: ARM i.MX ehci: factor out soc specific functions Currently we have a mxc_initialize_usb_hw which is called on every i.MX SoC. This function dispatches the different SoC types, which is quite ugly. This patch moves the SoC specific USB initialization to their correspondive mach directories. Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/Makefile | 4 +- arch/arm/mach-imx/ehci-imx25.c | 80 +++++++ arch/arm/mach-imx/ehci-imx27.c | 82 +++++++ arch/arm/mach-mx3/Makefile | 4 +- arch/arm/mach-mx3/ehci-imx31.c | 83 ++++++++ arch/arm/mach-mx3/ehci-imx35.c | 80 +++++++ arch/arm/mach-mx5/Makefile | 2 +- arch/arm/mach-mx5/ehci.c | 156 ++++++++++++++ arch/arm/plat-mxc/ehci.c | 343 +----------------------------- arch/arm/plat-mxc/include/mach/mxc_ehci.h | 6 + 10 files changed, 502 insertions(+), 338 deletions(-) create mode 100644 arch/arm/mach-imx/ehci-imx25.c create mode 100644 arch/arm/mach-imx/ehci-imx27.c create mode 100644 arch/arm/mach-mx3/ehci-imx31.c create mode 100644 arch/arm/mach-mx3/ehci-imx35.c create mode 100644 arch/arm/mach-mx5/ehci.c (limited to 'arch') diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 3e49ae0618a..b85794d2799 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -9,10 +9,10 @@ obj-$(CONFIG_IMX_HAVE_DMA_V1) += dma-v1.o obj-$(CONFIG_ARCH_MX1) += clock-imx1.o mm-imx1.o obj-$(CONFIG_MACH_MX21) += clock-imx21.o mm-imx21.o -obj-$(CONFIG_ARCH_MX25) += clock-imx25.o mm-imx25.o +obj-$(CONFIG_ARCH_MX25) += clock-imx25.o mm-imx25.o ehci-imx25.o obj-$(CONFIG_MACH_MX27) += cpu-imx27.o pm-imx27.o -obj-$(CONFIG_MACH_MX27) += clock-imx27.o mm-imx27.o +obj-$(CONFIG_MACH_MX27) += clock-imx27.o mm-imx27.o ehci-imx27.o # Support for CMOS sensor interface obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o diff --git a/arch/arm/mach-imx/ehci-imx25.c b/arch/arm/mach-imx/ehci-imx25.c new file mode 100644 index 00000000000..865daf0b09e --- /dev/null +++ b/arch/arm/mach-imx/ehci-imx25.c @@ -0,0 +1,80 @@ +/* + * Copyright (c) 2009 Daniel Mack + * Copyright (C) 2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include +#include + +#include +#include + +#define USBCTRL_OTGBASE_OFFSET 0x600 + +#define MX25_OTG_SIC_SHIFT 29 +#define MX25_OTG_SIC_MASK (0x3 << MX25_OTG_SIC_SHIFT) +#define MX25_OTG_PM_BIT (1 << 24) + +#define MX25_H1_SIC_SHIFT 21 +#define MX25_H1_SIC_MASK (0x3 << MX25_H1_SIC_SHIFT) +#define MX25_H1_PM_BIT (1 << 8) +#define MX25_H1_IPPUE_UP_BIT (1 << 7) +#define MX25_H1_IPPUE_DOWN_BIT (1 << 6) +#define MX25_H1_TLL_BIT (1 << 5) +#define MX25_H1_USBTE_BIT (1 << 4) + +int mx25_initialize_usb_hw(int port, unsigned int flags) +{ + unsigned int v; + + v = readl(MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); + + switch (port) { + case 0: /* OTG port */ + v &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PM_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT; + + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX25_OTG_PM_BIT; + + break; + case 1: /* H1 port */ + v &= ~(MX25_H1_SIC_MASK | MX25_H1_PM_BIT | MX25_H1_TLL_BIT | + MX25_H1_USBTE_BIT | MX25_H1_IPPUE_DOWN_BIT | MX25_H1_IPPUE_UP_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT; + + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX25_H1_PM_BIT; + + if (!(flags & MXC_EHCI_TTL_ENABLED)) + v |= MX25_H1_TLL_BIT; + + if (flags & MXC_EHCI_INTERNAL_PHY) + v |= MX25_H1_USBTE_BIT; + + if (flags & MXC_EHCI_IPPUE_DOWN) + v |= MX25_H1_IPPUE_DOWN_BIT; + + if (flags & MXC_EHCI_IPPUE_UP) + v |= MX25_H1_IPPUE_UP_BIT; + + break; + default: + return -EINVAL; + } + + writel(v, MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); + + return 0; +} + diff --git a/arch/arm/mach-imx/ehci-imx27.c b/arch/arm/mach-imx/ehci-imx27.c new file mode 100644 index 00000000000..fa69419eabd --- /dev/null +++ b/arch/arm/mach-imx/ehci-imx27.c @@ -0,0 +1,82 @@ +/* + * Copyright (c) 2009 Daniel Mack + * Copyright (C) 2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include +#include + +#include +#include + +#define USBCTRL_OTGBASE_OFFSET 0x600 + +#define MX27_OTG_SIC_SHIFT 29 +#define MX27_OTG_SIC_MASK (0x3 << MX27_OTG_SIC_SHIFT) +#define MX27_OTG_PM_BIT (1 << 24) + +#define MX27_H2_SIC_SHIFT 21 +#define MX27_H2_SIC_MASK (0x3 << MX27_H2_SIC_SHIFT) +#define MX27_H2_PM_BIT (1 << 16) +#define MX27_H2_DT_BIT (1 << 5) + +#define MX27_H1_SIC_SHIFT 13 +#define MX27_H1_SIC_MASK (0x3 << MX27_H1_SIC_SHIFT) +#define MX27_H1_PM_BIT (1 << 8) +#define MX27_H1_DT_BIT (1 << 4) + +int mx27_initialize_usb_hw(int port, unsigned int flags) +{ + unsigned int v; + + v = readl(MX27_IO_ADDRESS(MX27_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); + + switch (port) { + case 0: /* OTG port */ + v &= ~(MX27_OTG_SIC_MASK | MX27_OTG_PM_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_OTG_SIC_SHIFT; + + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX27_OTG_PM_BIT; + break; + case 1: /* H1 port */ + v &= ~(MX27_H1_SIC_MASK | MX27_H1_PM_BIT | MX27_H1_DT_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_H1_SIC_SHIFT; + + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX27_H1_PM_BIT; + + if (!(flags & MXC_EHCI_TTL_ENABLED)) + v |= MX27_H1_DT_BIT; + + break; + case 2: /* H2 port */ + v &= ~(MX27_H2_SIC_MASK | MX27_H2_PM_BIT | MX27_H2_DT_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_H2_SIC_SHIFT; + + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX27_H2_PM_BIT; + + if (!(flags & MXC_EHCI_TTL_ENABLED)) + v |= MX27_H2_DT_BIT; + + break; + default: + return -EINVAL; + } + + writel(v, MX27_IO_ADDRESS(MX27_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); + + return 0; +} + diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile index bc7294f8701..224d07a79d7 100644 --- a/arch/arm/mach-mx3/Makefile +++ b/arch/arm/mach-mx3/Makefile @@ -5,8 +5,8 @@ # Object file lists. obj-y := mm.o devices.o cpu.o -obj-$(CONFIG_SOC_IMX31) += clock-imx31.o iomux-imx31.o -obj-$(CONFIG_SOC_IMX35) += clock-imx35.o +obj-$(CONFIG_SOC_IMX31) += clock-imx31.o iomux-imx31.o ehci-imx31.o +obj-$(CONFIG_SOC_IMX35) += clock-imx35.o ehci-imx35.o obj-$(CONFIG_MACH_MX31ADS) += mach-mx31ads.o obj-$(CONFIG_MACH_MX31LILLY) += mach-mx31lilly.o mx31lilly-db.o obj-$(CONFIG_MACH_MX31LITE) += mach-mx31lite.o mx31lite-db.o diff --git a/arch/arm/mach-mx3/ehci-imx31.c b/arch/arm/mach-mx3/ehci-imx31.c new file mode 100644 index 00000000000..314a983ac61 --- /dev/null +++ b/arch/arm/mach-mx3/ehci-imx31.c @@ -0,0 +1,83 @@ +/* + * Copyright (c) 2009 Daniel Mack + * Copyright (C) 2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include +#include + +#include +#include + +#define USBCTRL_OTGBASE_OFFSET 0x600 + +#define MX31_OTG_SIC_SHIFT 29 +#define MX31_OTG_SIC_MASK (0x3 << MX31_OTG_SIC_SHIFT) +#define MX31_OTG_PM_BIT (1 << 24) + +#define MX31_H2_SIC_SHIFT 21 +#define MX31_H2_SIC_MASK (0x3 << MX31_H2_SIC_SHIFT) +#define MX31_H2_PM_BIT (1 << 16) +#define MX31_H2_DT_BIT (1 << 5) + +#define MX31_H1_SIC_SHIFT 13 +#define MX31_H1_SIC_MASK (0x3 << MX31_H1_SIC_SHIFT) +#define MX31_H1_PM_BIT (1 << 8) +#define MX31_H1_DT_BIT (1 << 4) + +int mx31_initialize_usb_hw(int port, unsigned int flags) +{ + unsigned int v; + + v = readl(MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); + + switch (port) { + case 0: /* OTG port */ + v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_OTG_SIC_SHIFT; + + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX31_OTG_PM_BIT; + + break; + case 1: /* H1 port */ + v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H1_SIC_SHIFT; + + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX31_H1_PM_BIT; + + if (!(flags & MXC_EHCI_TTL_ENABLED)) + v |= MX31_H1_DT_BIT; + + break; + case 2: /* H2 port */ + v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H2_SIC_SHIFT; + + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX31_H2_PM_BIT; + + if (!(flags & MXC_EHCI_TTL_ENABLED)) + v |= MX31_H2_DT_BIT; + + break; + default: + return -EINVAL; + } + + writel(v, MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); + + return 0; +} + diff --git a/arch/arm/mach-mx3/ehci-imx35.c b/arch/arm/mach-mx3/ehci-imx35.c new file mode 100644 index 00000000000..33983a478c6 --- /dev/null +++ b/arch/arm/mach-mx3/ehci-imx35.c @@ -0,0 +1,80 @@ +/* + * Copyright (c) 2009 Daniel Mack + * Copyright (C) 2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include +#include + +#include +#include + +#define USBCTRL_OTGBASE_OFFSET 0x600 + +#define MX35_OTG_SIC_SHIFT 29 +#define MX35_OTG_SIC_MASK (0x3 << MX35_OTG_SIC_SHIFT) +#define MX35_OTG_PM_BIT (1 << 24) + +#define MX35_H1_SIC_SHIFT 21 +#define MX35_H1_SIC_MASK (0x3 << MX35_H1_SIC_SHIFT) +#define MX35_H1_PM_BIT (1 << 8) +#define MX35_H1_IPPUE_UP_BIT (1 << 7) +#define MX35_H1_IPPUE_DOWN_BIT (1 << 6) +#define MX35_H1_TLL_BIT (1 << 5) +#define MX35_H1_USBTE_BIT (1 << 4) + +int mx35_initialize_usb_hw(int port, unsigned int flags) +{ + unsigned int v; + + v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); + + switch (port) { + case 0: /* OTG port */ + v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_OTG_SIC_SHIFT; + + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX35_OTG_PM_BIT; + + break; + case 1: /* H1 port */ + v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT | + MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_H1_SIC_SHIFT; + + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX35_H1_PM_BIT; + + if (!(flags & MXC_EHCI_TTL_ENABLED)) + v |= MX35_H1_TLL_BIT; + + if (flags & MXC_EHCI_INTERNAL_PHY) + v |= MX35_H1_USBTE_BIT; + + if (flags & MXC_EHCI_IPPUE_DOWN) + v |= MX35_H1_IPPUE_DOWN_BIT; + + if (flags & MXC_EHCI_IPPUE_UP) + v |= MX35_H1_IPPUE_UP_BIT; + + break; + default: + return -EINVAL; + } + + writel(v, MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); + + return 0; +} + diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile index 0d43be98e51..dc2728823fd 100644 --- a/arch/arm/mach-mx5/Makefile +++ b/arch/arm/mach-mx5/Makefile @@ -3,7 +3,7 @@ # # Object file lists. -obj-y := cpu.o mm.o clock-mx51-mx53.o devices.o +obj-y := cpu.o mm.o clock-mx51-mx53.o devices.o ehci.o obj-$(CONFIG_SOC_IMX50) += mm-mx50.o obj-$(CONFIG_CPU_FREQ_IMX) += cpu_op-mx51.o diff --git a/arch/arm/mach-mx5/ehci.c b/arch/arm/mach-mx5/ehci.c new file mode 100644 index 00000000000..7ce12c804a3 --- /dev/null +++ b/arch/arm/mach-mx5/ehci.c @@ -0,0 +1,156 @@ +/* + * Copyright (c) 2009 Daniel Mack + * Copyright (C) 2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include +#include + +#include +#include + +#define MXC_OTG_OFFSET 0 +#define MXC_H1_OFFSET 0x200 +#define MXC_H2_OFFSET 0x400 + +/* USB_CTRL */ +#define MXC_OTG_UCTRL_OWIE_BIT (1 << 27) /* OTG wakeup intr enable */ +#define MXC_OTG_UCTRL_OPM_BIT (1 << 24) /* OTG power mask */ +#define MXC_H1_UCTRL_H1UIE_BIT (1 << 12) /* Host1 ULPI interrupt enable */ +#define MXC_H1_UCTRL_H1WIE_BIT (1 << 11) /* HOST1 wakeup intr enable */ +#define MXC_H1_UCTRL_H1PM_BIT (1 << 8) /* HOST1 power mask */ + +/* USB_PHY_CTRL_FUNC */ +#define MXC_OTG_PHYCTRL_OC_DIS_BIT (1 << 8) /* OTG Disable Overcurrent Event */ +#define MXC_H1_OC_DIS_BIT (1 << 5) /* UH1 Disable Overcurrent Event */ + +/* USBH2CTRL */ +#define MXC_H2_UCTRL_H2UIE_BIT (1 << 8) +#define MXC_H2_UCTRL_H2WIE_BIT (1 << 7) +#define MXC_H2_UCTRL_H2PM_BIT (1 << 4) + +#define MXC_USBCMD_OFFSET 0x140 + +/* USBCMD */ +#define MXC_UCMD_ITC_NO_THRESHOLD_MASK (~(0xff << 16)) /* Interrupt Threshold Control */ + +int mx51_initialize_usb_hw(int port, unsigned int flags) +{ + unsigned int v; + void __iomem *usb_base; + void __iomem *usbotg_base; + void __iomem *usbother_base; + int ret = 0; + + usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); + if (!usb_base) { + printk(KERN_ERR "%s(): ioremap failed\n", __func__); + return -ENOMEM; + } + + switch (port) { + case 0: /* OTG port */ + usbotg_base = usb_base + MXC_OTG_OFFSET; + break; + case 1: /* Host 1 port */ + usbotg_base = usb_base + MXC_H1_OFFSET; + break; + case 2: /* Host 2 port */ + usbotg_base = usb_base + MXC_H2_OFFSET; + break; + default: + printk(KERN_ERR"%s no such port %d\n", __func__, port); + ret = -ENOENT; + goto error; + } + usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; + + switch (port) { + case 0: /*OTG port */ + if (flags & MXC_EHCI_INTERNAL_PHY) { + v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); + + if (flags & MXC_EHCI_POWER_PINS_ENABLED) { + /* OC/USBPWR is not used */ + v |= MXC_OTG_PHYCTRL_OC_DIS_BIT; + } else { + /* OC/USBPWR is used */ + v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT; + } + __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); + + v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET); + if (flags & MXC_EHCI_WAKEUP_ENABLED) + v |= MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup enable */ + else + v &= ~MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup disable */ + if (flags & MXC_EHCI_POWER_PINS_ENABLED) + v |= MXC_OTG_UCTRL_OPM_BIT; + else + v &= ~MXC_OTG_UCTRL_OPM_BIT; + __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET); + } + break; + case 1: /* Host 1 */ + /*Host ULPI */ + v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET); + if (flags & MXC_EHCI_WAKEUP_ENABLED) { + /* HOST1 wakeup/ULPI intr enable */ + v |= (MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT); + } else { + /* HOST1 wakeup/ULPI intr disable */ + v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT); + } + + if (flags & MXC_EHCI_POWER_PINS_ENABLED) + v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/ + else + v |= MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/ + __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET); + + v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); + if (flags & MXC_EHCI_POWER_PINS_ENABLED) + v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */ + else + v |= MXC_H1_OC_DIS_BIT; /* OC is not used */ + __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); + + v = __raw_readl(usbotg_base + MXC_USBCMD_OFFSET); + if (flags & MXC_EHCI_ITC_NO_THRESHOLD) + /* Interrupt Threshold Control:Immediate (no threshold) */ + v &= MXC_UCMD_ITC_NO_THRESHOLD_MASK; + __raw_writel(v, usbotg_base + MXC_USBCMD_OFFSET); + break; + case 2: /* Host 2 ULPI */ + v = __raw_readl(usbother_base + MXC_USBH2CTRL_OFFSET); + if (flags & MXC_EHCI_WAKEUP_ENABLED) { + /* HOST1 wakeup/ULPI intr enable */ + v |= (MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT); + } else { + /* HOST1 wakeup/ULPI intr disable */ + v &= ~(MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT); + } + + if (flags & MXC_EHCI_POWER_PINS_ENABLED) + v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/ + else + v |= MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/ + __raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET); + break; + } + +error: + iounmap(usb_base); + return ret; +} + diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c index 8772ce346a5..06fb3a4d7c2 100644 --- a/arch/arm/plat-mxc/ehci.c +++ b/arch/arm/plat-mxc/ehci.c @@ -14,352 +14,29 @@ */ #include -#include #include #include -#define USBCTRL_OTGBASE_OFFSET 0x600 - -#define MX31_OTG_SIC_SHIFT 29 -#define MX31_OTG_SIC_MASK (0x3 << MX31_OTG_SIC_SHIFT) -#define MX31_OTG_PM_BIT (1 << 24) - -#define MX31_H2_SIC_SHIFT 21 -#define MX31_H2_SIC_MASK (0x3 << MX31_H2_SIC_SHIFT) -#define MX31_H2_PM_BIT (1 << 16) -#define MX31_H2_DT_BIT (1 << 5) - -#define MX31_H1_SIC_SHIFT 13 -#define MX31_H1_SIC_MASK (0x3 << MX31_H1_SIC_SHIFT) -#define MX31_H1_PM_BIT (1 << 8) -#define MX31_H1_DT_BIT (1 << 4) - -#define MX35_OTG_SIC_SHIFT 29 -#define MX35_OTG_SIC_MASK (0x3 << MX35_OTG_SIC_SHIFT) -#define MX35_OTG_PM_BIT (1 << 24) - -#define MX35_H1_SIC_SHIFT 21 -#define MX35_H1_SIC_MASK (0x3 << MX35_H1_SIC_SHIFT) -#define MX35_H1_PM_BIT (1 << 8) -#define MX35_H1_IPPUE_UP_BIT (1 << 7) -#define MX35_H1_IPPUE_DOWN_BIT (1 << 6) -#define MX35_H1_TLL_BIT (1 << 5) -#define MX35_H1_USBTE_BIT (1 << 4) - -#define MXC_OTG_OFFSET 0 -#define MXC_H1_OFFSET 0x200 -#define MXC_H2_OFFSET 0x400 - -/* USB_CTRL */ -#define MXC_OTG_UCTRL_OWIE_BIT (1 << 27) /* OTG wakeup intr enable */ -#define MXC_OTG_UCTRL_OPM_BIT (1 << 24) /* OTG power mask */ -#define MXC_H1_UCTRL_H1UIE_BIT (1 << 12) /* Host1 ULPI interrupt enable */ -#define MXC_H1_UCTRL_H1WIE_BIT (1 << 11) /* HOST1 wakeup intr enable */ -#define MXC_H1_UCTRL_H1PM_BIT (1 << 8) /* HOST1 power mask */ - -/* USB_PHY_CTRL_FUNC */ -#define MXC_OTG_PHYCTRL_OC_DIS_BIT (1 << 8) /* OTG Disable Overcurrent Event */ -#define MXC_H1_OC_DIS_BIT (1 << 5) /* UH1 Disable Overcurrent Event */ - -/* USBH2CTRL */ -#define MXC_H2_UCTRL_H2UIE_BIT (1 << 8) -#define MXC_H2_UCTRL_H2WIE_BIT (1 << 7) -#define MXC_H2_UCTRL_H2PM_BIT (1 << 4) - -#define MXC_USBCMD_OFFSET 0x140 - -/* USBCMD */ -#define MXC_UCMD_ITC_NO_THRESHOLD_MASK (~(0xff << 16)) /* Interrupt Threshold Control */ - int mxc_initialize_usb_hw(int port, unsigned int flags) { - unsigned int v; #if defined(CONFIG_SOC_IMX25) - if (cpu_is_mx25()) { - v = readl(MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + - USBCTRL_OTGBASE_OFFSET)); - - switch (port) { - case 0: /* OTG port */ - v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) - << MX35_OTG_SIC_SHIFT; - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX35_OTG_PM_BIT; - - break; - case 1: /* H1 port */ - v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT | - MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) - << MX35_H1_SIC_SHIFT; - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX35_H1_PM_BIT; - - if (!(flags & MXC_EHCI_TTL_ENABLED)) - v |= MX35_H1_TLL_BIT; - - if (flags & MXC_EHCI_INTERNAL_PHY) - v |= MX35_H1_USBTE_BIT; - - if (flags & MXC_EHCI_IPPUE_DOWN) - v |= MX35_H1_IPPUE_DOWN_BIT; - - if (flags & MXC_EHCI_IPPUE_UP) - v |= MX35_H1_IPPUE_UP_BIT; - - break; - default: - return -EINVAL; - } - - writel(v, MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + - USBCTRL_OTGBASE_OFFSET)); - return 0; - } + if (cpu_is_mx25()) + return mx25_initialize_usb_hw(port, flags); #endif /* if defined(CONFIG_SOC_IMX25) */ #if defined(CONFIG_ARCH_MX3) - if (cpu_is_mx31()) { - v = readl(MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + - USBCTRL_OTGBASE_OFFSET)); - - switch (port) { - case 0: /* OTG port */ - v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) - << MX31_OTG_SIC_SHIFT; - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX31_OTG_PM_BIT; - - break; - case 1: /* H1 port */ - v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) - << MX31_H1_SIC_SHIFT; - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX31_H1_PM_BIT; - - if (!(flags & MXC_EHCI_TTL_ENABLED)) - v |= MX31_H1_DT_BIT; - - break; - case 2: /* H2 port */ - v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) - << MX31_H2_SIC_SHIFT; - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX31_H2_PM_BIT; - - if (!(flags & MXC_EHCI_TTL_ENABLED)) - v |= MX31_H2_DT_BIT; - - break; - default: - return -EINVAL; - } - - writel(v, MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + - USBCTRL_OTGBASE_OFFSET)); - return 0; - } - - if (cpu_is_mx35()) { - v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + - USBCTRL_OTGBASE_OFFSET)); - - switch (port) { - case 0: /* OTG port */ - v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) - << MX35_OTG_SIC_SHIFT; - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX35_OTG_PM_BIT; - - break; - case 1: /* H1 port */ - v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT | - MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) - << MX35_H1_SIC_SHIFT; - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX35_H1_PM_BIT; - - if (!(flags & MXC_EHCI_TTL_ENABLED)) - v |= MX35_H1_TLL_BIT; - - if (flags & MXC_EHCI_INTERNAL_PHY) - v |= MX35_H1_USBTE_BIT; - - if (flags & MXC_EHCI_IPPUE_DOWN) - v |= MX35_H1_IPPUE_DOWN_BIT; - - if (flags & MXC_EHCI_IPPUE_UP) - v |= MX35_H1_IPPUE_UP_BIT; - - break; - default: - return -EINVAL; - } - - writel(v, MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + - USBCTRL_OTGBASE_OFFSET)); - return 0; - } + if (cpu_is_mx31()) + return mx31_initialize_usb_hw(port, flags); + if (cpu_is_mx35()) + return mx35_initialize_usb_hw(port, flags); #endif /* CONFIG_ARCH_MX3 */ #ifdef CONFIG_MACH_MX27 - if (cpu_is_mx27()) { - /* On i.MX27 we can use the i.MX31 USBCTRL bits, they - * are identical - */ - v = readl(MX27_IO_ADDRESS(MX27_USB_BASE_ADDR + - USBCTRL_OTGBASE_OFFSET)); - switch (port) { - case 0: /* OTG port */ - v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) - << MX31_OTG_SIC_SHIFT; - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX31_OTG_PM_BIT; - break; - case 1: /* H1 port */ - v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) - << MX31_H1_SIC_SHIFT; - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX31_H1_PM_BIT; - - if (!(flags & MXC_EHCI_TTL_ENABLED)) - v |= MX31_H1_DT_BIT; - - break; - case 2: /* H2 port */ - v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) - << MX31_H2_SIC_SHIFT; - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX31_H2_PM_BIT; - - if (!(flags & MXC_EHCI_TTL_ENABLED)) - v |= MX31_H2_DT_BIT; - - break; - default: - return -EINVAL; - } - writel(v, MX27_IO_ADDRESS(MX27_USB_BASE_ADDR + - USBCTRL_OTGBASE_OFFSET)); - return 0; - } + if (cpu_is_mx27()) + return mx27_initialize_usb_hw(port, flags); #endif /* CONFIG_MACH_MX27 */ #ifdef CONFIG_SOC_IMX51 - if (cpu_is_mx51()) { - void __iomem *usb_base; - void __iomem *usbotg_base; - void __iomem *usbother_base; - int ret = 0; - - usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); - if (!usb_base) { - printk(KERN_ERR "%s(): ioremap failed\n", __func__); - return -ENOMEM; - } - - switch (port) { - case 0: /* OTG port */ - usbotg_base = usb_base + MXC_OTG_OFFSET; - break; - case 1: /* Host 1 port */ - usbotg_base = usb_base + MXC_H1_OFFSET; - break; - case 2: /* Host 2 port */ - usbotg_base = usb_base + MXC_H2_OFFSET; - break; - default: - printk(KERN_ERR"%s no such port %d\n", __func__, port); - ret = -ENOENT; - goto error; - } - usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; - - switch (port) { - case 0: /*OTG port */ - if (flags & MXC_EHCI_INTERNAL_PHY) { - v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); - - if (flags & MXC_EHCI_POWER_PINS_ENABLED) { - /* OC/USBPWR is not used */ - v |= MXC_OTG_PHYCTRL_OC_DIS_BIT; - } else { - /* OC/USBPWR is used */ - v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT; - } - __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); - - v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET); - if (flags & MXC_EHCI_WAKEUP_ENABLED) - v |= MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup enable */ - else - v &= ~MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup disable */ - if (flags & MXC_EHCI_POWER_PINS_ENABLED) - v |= MXC_OTG_UCTRL_OPM_BIT; - else - v &= ~MXC_OTG_UCTRL_OPM_BIT; - __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET); - } - break; - case 1: /* Host 1 */ - /*Host ULPI */ - v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET); - if (flags & MXC_EHCI_WAKEUP_ENABLED) { - /* HOST1 wakeup/ULPI intr enable */ - v |= (MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT); - } else { - /* HOST1 wakeup/ULPI intr disable */ - v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT); - } - - if (flags & MXC_EHCI_POWER_PINS_ENABLED) - v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/ - else - v |= MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/ - __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET); - - v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); - if (flags & MXC_EHCI_POWER_PINS_ENABLED) - v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */ - else - v |= MXC_H1_OC_DIS_BIT; /* OC is not used */ - __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); - - v = __raw_readl(usbotg_base + MXC_USBCMD_OFFSET); - if (flags & MXC_EHCI_ITC_NO_THRESHOLD) - /* Interrupt Threshold Control:Immediate (no threshold) */ - v &= MXC_UCMD_ITC_NO_THRESHOLD_MASK; - __raw_writel(v, usbotg_base + MXC_USBCMD_OFFSET); - break; - case 2: /* Host 2 ULPI */ - v = __raw_readl(usbother_base + MXC_USBH2CTRL_OFFSET); - if (flags & MXC_EHCI_WAKEUP_ENABLED) { - /* HOST1 wakeup/ULPI intr enable */ - v |= (MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT); - } else { - /* HOST1 wakeup/ULPI intr disable */ - v &= ~(MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT); - } - - if (flags & MXC_EHCI_POWER_PINS_ENABLED) - v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/ - else - v |= MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/ - __raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET); - break; - } - -error: - iounmap(usb_base); - return ret; - } + if (cpu_is_mx51()) + return mx51_initialize_usb_hw(port, flags); #endif printk(KERN_WARNING "%s() unable to setup USBCONTROL for this CPU\n", __func__); diff --git a/arch/arm/plat-mxc/include/mach/mxc_ehci.h b/arch/arm/plat-mxc/include/mach/mxc_ehci.h index a523a407929..7e555a1f4a4 100644 --- a/arch/arm/plat-mxc/include/mach/mxc_ehci.h +++ b/arch/arm/plat-mxc/include/mach/mxc_ehci.h @@ -50,5 +50,11 @@ struct mxc_usbh_platform_data { int mxc_initialize_usb_hw(int port, unsigned int flags); +int mx51_initialize_usb_hw(int port, unsigned int flags); +int mx25_initialize_usb_hw(int port, unsigned int flags); +int mx31_initialize_usb_hw(int port, unsigned int flags); +int mx35_initialize_usb_hw(int port, unsigned int flags); +int mx27_initialize_usb_hw(int port, unsigned int flags); + #endif /* __INCLUDE_ASM_ARCH_MXC_EHCI_H */ -- cgit v1.2.3-18-g5258 From 4bd597b633ae630e09d58957bd99870eac35fcb4 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 3 Jan 2011 11:30:28 +0100 Subject: ARM i.MX ehci: do ehci init in board specific functions The mxc-ehci driver calls SoC specific phy initialization right after calling board specific initialization. To offer greater flexibility for boards to setup the phy and to get rid of some unnecessary flags in platform data this patch lets the boards call the SoC specific phy initialization and remove it from the driver. Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/mach-cpuimx27.c | 14 +++++++-- arch/arm/mach-imx/mach-eukrea_cpuimx25.c | 16 ++++++++-- arch/arm/mach-imx/mach-imx27_visstrim_m10.c | 7 +++-- arch/arm/mach-imx/mach-mx25_3ds.c | 7 ++++- arch/arm/mach-imx/mach-mx27_3ds.c | 6 +++- arch/arm/mach-imx/mach-pca100.c | 12 +++++--- arch/arm/mach-imx/mach-pcm038.c | 8 ++++- arch/arm/mach-mx3/mach-armadillo5x0.c | 10 ++++--- arch/arm/mach-mx3/mach-cpuimx35.c | 16 ++++++++-- arch/arm/mach-mx3/mach-mx31_3ds.c | 17 +++++++---- arch/arm/mach-mx3/mach-mx31lilly.c | 17 +++++++---- arch/arm/mach-mx3/mach-mx31lite.c | 6 ++-- arch/arm/mach-mx3/mach-mx31moboard.c | 6 +++- arch/arm/mach-mx3/mach-mx35_3ds.c | 16 ++++++++-- arch/arm/mach-mx3/mach-pcm037.c | 14 +++++++-- arch/arm/mach-mx3/mach-pcm043.c | 16 ++++++++-- arch/arm/mach-mx3/mx31moboard-devboard.c | 7 +++-- arch/arm/mach-mx3/mx31moboard-marxbot.c | 6 ++-- arch/arm/mach-mx3/mx31moboard-smartbot.c | 7 ++++- arch/arm/mach-mx5/board-cpuimx51.c | 13 +++++--- arch/arm/mach-mx5/board-cpuimx51sd.c | 13 +++++--- arch/arm/mach-mx5/board-mx51_babbage.c | 13 +++++--- arch/arm/mach-mx5/board-mx51_efikamx.c | 6 ++-- arch/arm/plat-mxc/Makefile | 1 - arch/arm/plat-mxc/ehci.c | 46 ----------------------------- arch/arm/plat-mxc/include/mach/mxc_ehci.h | 3 -- 26 files changed, 191 insertions(+), 112 deletions(-) delete mode 100644 arch/arm/plat-mxc/ehci.c (limited to 'arch') diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index cabb800adbb..6b724c2ed0a 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -210,14 +210,24 @@ static struct platform_device serial_device = { #endif #if defined(CONFIG_USB_ULPI) +static int eukrea_cpuimx27_otg_init(struct platform_device *pdev) +{ + return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); +} + static struct mxc_usbh_platform_data otg_pdata __initdata = { + .init = eukrea_cpuimx27_otg_init, .portsc = MXC_EHCI_MODE_ULPI, - .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; +static int eukrea_cpuimx27_usbh2_init(struct platform_device *pdev) +{ + return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); +} + static struct mxc_usbh_platform_data usbh2_pdata __initdata = { + .init = eukrea_cpuimx27_usbh2_init, .portsc = MXC_EHCI_MODE_ULPI, - .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; #endif diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c index 439167dbe8f..9da8d18eeb0 100644 --- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c +++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c @@ -84,15 +84,25 @@ static struct i2c_board_info eukrea_cpuimx25_i2c_devices[] = { }, }; +static int eukrea_cpuimx25_otg_init(struct platform_device *pdev) +{ + return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); +} + static const struct mxc_usbh_platform_data otg_pdata __initconst = { + .init = eukrea_cpuimx25_otg_init, .portsc = MXC_EHCI_MODE_UTMI, - .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; +static int eukrea_cpuimx25_usbh2_init(struct platform_device *pdev) +{ + return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI | + MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN); +} + static const struct mxc_usbh_platform_data usbh2_pdata __initconst = { + .init = eukrea_cpuimx25_usbh2_init, .portsc = MXC_EHCI_MODE_SERIAL, - .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY | - MXC_EHCI_IPPUE_DOWN, }; static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index 494723bf7ea..ffff2d03f78 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include @@ -210,14 +211,16 @@ static struct i2c_board_info visstrim_m10_i2c_devices[] = { static int otg_phy_init(struct platform_device *pdev) { gpio_set_value(OTG_PHY_CS_GPIO, 0); - return 0; + + mdelay(10); + + return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED); } static const struct mxc_usbh_platform_data visstrim_m10_usbotg_pdata __initconst = { .init = otg_phy_init, .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, - .flags = MXC_EHCI_POWER_PINS_ENABLED, }; static void __init visstrim_m10_board_init(void) diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c index cd18a0c91b8..aafc6f7f181 100644 --- a/arch/arm/mach-imx/mach-mx25_3ds.c +++ b/arch/arm/mach-imx/mach-mx25_3ds.c @@ -185,9 +185,14 @@ static const struct matrix_keymap_data mx25pdk_keymap_data __initconst = { .keymap_size = ARRAY_SIZE(mx25pdk_keymap), }; +static int mx25pdk_usbh2_init(struct platform_device *pdev) +{ + return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY); +} + static const struct mxc_usbh_platform_data usbh2_pdata __initconst = { + .init = mx25pdk_usbh2_init, .portsc = MXC_EHCI_MODE_SERIAL, - .flags = MXC_EHCI_INTERNAL_PHY, }; static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index 4e0e225ca4a..ba88417345a 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -160,10 +160,14 @@ static int otg_phy_init(void) } #if defined(CONFIG_USB_ULPI) +static int mx27_3ds_otg_init(struct platform_device *pdev) +{ + return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); +} static struct mxc_usbh_platform_data otg_pdata __initdata = { + .init = mx27_3ds_otg_init, .portsc = MXC_EHCI_MODE_ULPI, - .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; #endif diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index 3514178caed..f754bab040b 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -271,25 +271,29 @@ static const struct imxmmc_platform_data sdhc_pdata __initconst = { static int otg_phy_init(struct platform_device *pdev) { gpio_set_value(OTG_PHY_CS_GPIO, 0); - return 0; + + mdelay(10); + + return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); } static struct mxc_usbh_platform_data otg_pdata __initdata = { .init = otg_phy_init, .portsc = MXC_EHCI_MODE_ULPI, - .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; static int usbh2_phy_init(struct platform_device *pdev) { gpio_set_value(USBH2_PHY_CS_GPIO, 0); - return 0; + + mdelay(10); + + return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); } static struct mxc_usbh_platform_data usbh2_pdata __initdata = { .init = usbh2_phy_init, .portsc = MXC_EHCI_MODE_ULPI, - .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; #endif diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c index 9656ef38ca9..38c77084b61 100644 --- a/arch/arm/mach-imx/mach-pcm038.c +++ b/arch/arm/mach-imx/mach-pcm038.c @@ -281,9 +281,15 @@ static struct spi_board_info pcm038_spi_board_info[] __initdata = { } }; +static int pcm038_usbh2_init(struct platform_device *pdev) +{ + return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED | + MXC_EHCI_INTERFACE_DIFF_UNI); +} + static const struct mxc_usbh_platform_data usbh2_pdata __initconst = { + .init = pcm038_usbh2_init, .portsc = MXC_EHCI_MODE_ULPI, - .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI, }; static void __init pcm038_init(void) diff --git a/arch/arm/mach-mx3/mach-armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c index 835e2a082b4..34e619e811e 100644 --- a/arch/arm/mach-mx3/mach-armadillo5x0.c +++ b/arch/arm/mach-mx3/mach-armadillo5x0.c @@ -176,8 +176,10 @@ static int usbotg_init(struct platform_device *pdev) gpio_set_value(OTG_RESET, 0/*LOW*/); mdelay(5); gpio_set_value(OTG_RESET, 1/*HIGH*/); + mdelay(10); - return 0; + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED | + MXC_EHCI_INTERFACE_DIFF_UNI); otg_free_reset: gpio_free(OTG_RESET); @@ -233,8 +235,10 @@ static int usbh2_init(struct platform_device *pdev) gpio_set_value(USBH2_RESET, 0/*LOW*/); mdelay(5); gpio_set_value(USBH2_RESET, 1/*HIGH*/); + mdelay(10); - return 0; + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED | + MXC_EHCI_INTERFACE_DIFF_UNI); h2_free_reset: gpio_free(USBH2_RESET); @@ -246,13 +250,11 @@ h2_free_cs: static struct mxc_usbh_platform_data usbotg_pdata __initdata = { .init = usbotg_init, .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, - .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI, }; static struct mxc_usbh_platform_data usbh2_pdata __initdata = { .init = usbh2_init, .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, - .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI, }; #endif /* CONFIG_USB_ULPI */ diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c index 3eedf0fcaed..0f2305626e1 100644 --- a/arch/arm/mach-mx3/mach-cpuimx35.c +++ b/arch/arm/mach-mx3/mach-cpuimx35.c @@ -111,15 +111,25 @@ static const struct mxc_nand_platform_data .flash_bbt = 1, }; +static int eukrea_cpuimx35_otg_init(struct platform_device *pdev) +{ + return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); +} + static const struct mxc_usbh_platform_data otg_pdata __initconst = { + .init = eukrea_cpuimx35_otg_init, .portsc = MXC_EHCI_MODE_UTMI, - .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; +static int eukrea_cpuimx35_usbh1_init(struct platform_device *pdev) +{ + return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI | + MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN); +} + static const struct mxc_usbh_platform_data usbh1_pdata __initconst = { + .init = eukrea_cpuimx35_usbh1_init, .portsc = MXC_EHCI_MODE_SERIAL, - .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY | - MXC_EHCI_IPPUE_DOWN, }; static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c index 3d0ded92a8a..2d744b27f63 100644 --- a/arch/arm/mach-mx3/mach-mx31_3ds.c +++ b/arch/arm/mach-mx3/mach-mx31_3ds.c @@ -245,7 +245,13 @@ usbotg_free_reset: return err; } -static int __maybe_unused mx31_3ds_host2_init(struct platform_device *pdev) +#if defined(CONFIG_USB_ULPI) +static int mx31_3ds_otg_init(struct platform_device *pdev) +{ + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED); +} + +static int mx31_3ds_host2_init(struct platform_device *pdev) { int err; @@ -276,23 +282,24 @@ static int __maybe_unused mx31_3ds_host2_init(struct platform_device *pdev) mdelay(1); gpio_set_value(USBH2_RST_B, 1); - return 0; + + mdelay(10); + + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED); usbotg_free_reset: gpio_free(USBH2_RST_B); return err; } -#if defined(CONFIG_USB_ULPI) static struct mxc_usbh_platform_data otg_pdata __initdata = { + .init = mx31_3ds_otg_init, .portsc = MXC_EHCI_MODE_ULPI, - .flags = MXC_EHCI_POWER_PINS_ENABLED, }; static struct mxc_usbh_platform_data usbh2_pdata __initdata = { .init = mx31_3ds_host2_init, .portsc = MXC_EHCI_MODE_ULPI, - .flags = MXC_EHCI_POWER_PINS_ENABLED, }; #endif diff --git a/arch/arm/mach-mx3/mach-mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c index 1c3f4913d1e..be79a0d6301 100644 --- a/arch/arm/mach-mx3/mach-mx31lilly.c +++ b/arch/arm/mach-mx3/mach-mx31lilly.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include @@ -156,7 +157,9 @@ static int usbotg_init(struct platform_device *pdev) gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE2), "USBH1 CS"); gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE2), 0); - return 0; + mdelay(10); + + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED); } static int usbh1_init(struct platform_device *pdev) @@ -183,7 +186,10 @@ static int usbh1_init(struct platform_device *pdev) mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true); - return 0; + mdelay(10); + + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED | + MXC_EHCI_INTERFACE_SINGLE_UNI); } static int usbh2_init(struct platform_device *pdev) @@ -220,25 +226,24 @@ static int usbh2_init(struct platform_device *pdev) gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS"); gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0); - return 0; + mdelay(10); + + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED); } static struct mxc_usbh_platform_data usbotg_pdata = { .init = usbotg_init, .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, - .flags = MXC_EHCI_POWER_PINS_ENABLED, }; static const struct mxc_usbh_platform_data usbh1_pdata __initconst = { .init = usbh1_init, .portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL, - .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI, }; static struct mxc_usbh_platform_data usbh2_pdata __initdata = { .init = usbh2_init, .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, - .flags = MXC_EHCI_POWER_PINS_ENABLED, }; static void lilly1131_usb_init(void) diff --git a/arch/arm/mach-mx3/mach-mx31lite.c b/arch/arm/mach-mx3/mach-mx31lite.c index 01e24b5045e..e146f1a72da 100644 --- a/arch/arm/mach-mx3/mach-mx31lite.c +++ b/arch/arm/mach-mx3/mach-mx31lite.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include @@ -167,13 +168,14 @@ static int usbh2_init(struct platform_device *pdev) gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS"); gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0); - return 0; + mdelay(10); + + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED); } static struct mxc_usbh_platform_data usbh2_pdata __initdata = { .init = usbh2_init, .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, - .flags = MXC_EHCI_POWER_PINS_ENABLED, }; #endif diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c index fd988a0d9a5..ea880330e83 100644 --- a/arch/arm/mach-mx3/mach-mx31moboard.c +++ b/arch/arm/mach-mx3/mach-mx31moboard.c @@ -401,10 +401,14 @@ static void usb_xcvr_reset(void) } #if defined(CONFIG_USB_ULPI) +static int moboard_usbh2_init_hw(struct platform_device *pdev) +{ + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED); +} static struct mxc_usbh_platform_data usbh2_pdata __initdata = { + .init = moboard_usbh2_init_hw, .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, - .flags = MXC_EHCI_POWER_PINS_ENABLED, }; static int __init moboard_usbh2_init(void) diff --git a/arch/arm/mach-mx3/mach-mx35_3ds.c b/arch/arm/mach-mx3/mach-mx35_3ds.c index c5115dc5c0c..dac1896a5b2 100644 --- a/arch/arm/mach-mx3/mach-mx35_3ds.c +++ b/arch/arm/mach-mx3/mach-mx35_3ds.c @@ -120,6 +120,11 @@ static iomux_v3_cfg_t mx35pdk_pads[] = { MX35_PAD_SD1_DATA3__ESDHC1_DAT3, }; +static int mx35_3ds_otg_init(struct platform_device *pdev) +{ + return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY); +} + /* OTG config */ static const struct fsl_usb2_platform_data usb_otg_pdata __initconst = { .operating_mode = FSL_USB2_DR_DEVICE, @@ -127,15 +132,20 @@ static const struct fsl_usb2_platform_data usb_otg_pdata __initconst = { }; static struct mxc_usbh_platform_data otg_pdata __initdata = { + .init = mx35_3ds_otg_init, .portsc = MXC_EHCI_MODE_UTMI, - .flags = MXC_EHCI_INTERNAL_PHY, }; +static int mx35_3ds_usbh_init(struct platform_device *pdev) +{ + return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI | + MXC_EHCI_INTERNAL_PHY); +} + /* USB HOST config */ static const struct mxc_usbh_platform_data usb_host_pdata __initconst = { + .init = mx35_3ds_usbh_init, .portsc = MXC_EHCI_MODE_SERIAL, - .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | - MXC_EHCI_INTERNAL_PHY, }; static int otg_mode_host; diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c index 7d444f714f3..55f95d42f71 100644 --- a/arch/arm/mach-mx3/mach-pcm037.c +++ b/arch/arm/mach-mx3/mach-pcm037.c @@ -534,14 +534,24 @@ static struct platform_device pcm970_sja1000 = { }; #if defined(CONFIG_USB_ULPI) +static int pcm037_otg_init(struct platform_device *pdev) +{ + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); +} + static struct mxc_usbh_platform_data otg_pdata __initdata = { + .init = pcm037_otg_init, .portsc = MXC_EHCI_MODE_ULPI, - .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; +static int pcm037_usbh2_init(struct platform_device *pdev) +{ + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); +} + static struct mxc_usbh_platform_data usbh2_pdata __initdata = { + .init = pcm037_usbh2_init, .portsc = MXC_EHCI_MODE_ULPI, - .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; #endif diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c index b03e19d6548..4fa07142a9b 100644 --- a/arch/arm/mach-mx3/mach-pcm043.c +++ b/arch/arm/mach-mx3/mach-pcm043.c @@ -306,16 +306,26 @@ pcm037_nand_board_info __initconst = { }; #if defined(CONFIG_USB_ULPI) +static int pcm043_otg_init(struct platform_device *pdev) +{ + return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); +} + static struct mxc_usbh_platform_data otg_pdata __initdata = { + .init = pcm043_otg_init, .portsc = MXC_EHCI_MODE_UTMI, - .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; #endif +static int pcm043_usbh1_init(struct platform_device *pdev) +{ + return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI | + MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN); +} + static const struct mxc_usbh_platform_data usbh1_pdata __initconst = { + .init = pcm043_usbh1_init, .portsc = MXC_EHCI_MODE_SERIAL, - .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY | - MXC_EHCI_IPPUE_DOWN, }; static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c index 94a0b9e4b7f..6410b9c48a0 100644 --- a/arch/arm/mach-mx3/mx31moboard-devboard.c +++ b/arch/arm/mach-mx3/mx31moboard-devboard.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -149,7 +150,10 @@ static int devboard_usbh1_hw_init(struct platform_device *pdev) mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG); mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG); - return 0; + mdelay(10); + + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED | + MXC_EHCI_INTERFACE_SINGLE_UNI); } #define USBH1_VBUSEN_B IOMUX_TO_GPIO(MX31_PIN_NFRE_B) @@ -187,7 +191,6 @@ static int devboard_isp1105_set_vbus(struct otg_transceiver *otg, bool on) static struct mxc_usbh_platform_data usbh1_pdata __initdata = { .init = devboard_usbh1_hw_init, .portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL, - .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI, }; static int __init devboard_usbh1_init(void) diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c index f449a97ae1a..57f7b00cb70 100644 --- a/arch/arm/mach-mx3/mx31moboard-marxbot.c +++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c @@ -265,7 +265,10 @@ static int marxbot_usbh1_hw_init(struct platform_device *pdev) mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG); mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG); - return 0; + mdelay(10); + + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED | + MXC_EHCI_INTERFACE_SINGLE_UNI); } #define USBH1_VBUSEN_B IOMUX_TO_GPIO(MX31_PIN_NFRE_B) @@ -303,7 +306,6 @@ static int marxbot_isp1105_set_vbus(struct otg_transceiver *otg, bool on) static struct mxc_usbh_platform_data usbh1_pdata __initdata = { .init = marxbot_usbh1_hw_init, .portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL, - .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI, }; static int __init marxbot_usbh1_init(void) diff --git a/arch/arm/mach-mx3/mx31moboard-smartbot.c b/arch/arm/mach-mx3/mx31moboard-smartbot.c index bbec3c82264..87d556f40ec 100644 --- a/arch/arm/mach-mx3/mx31moboard-smartbot.c +++ b/arch/arm/mach-mx3/mx31moboard-smartbot.c @@ -123,9 +123,14 @@ static const struct fsl_usb2_platform_data usb_pdata __initconst = { #if defined(CONFIG_USB_ULPI) +static int smartbot_otg_init(struct platform_device *pdev) +{ + return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED); +} + static struct mxc_usbh_platform_data otg_host_pdata __initdata = { + .init = smartbot_otg_init, .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, - .flags = MXC_EHCI_POWER_PINS_ENABLED, }; static int __init smartbot_otg_host_init(void) diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c index 2d4199d3790..d0296a94c47 100644 --- a/arch/arm/mach-mx5/board-cpuimx51.c +++ b/arch/arm/mach-mx5/board-cpuimx51.c @@ -184,7 +184,10 @@ static int initialize_otg_port(struct platform_device *pdev) v |= MX51_USB_PLL_DIV_19_2_MHZ; __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); iounmap(usb_base); - return 0; + + mdelay(10); + + return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY); } static int initialize_usbh1_port(struct platform_device *pdev) @@ -202,13 +205,16 @@ static int initialize_usbh1_port(struct platform_device *pdev) v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET); __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET); iounmap(usb_base); - return 0; + + mdelay(10); + + return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED | + MXC_EHCI_ITC_NO_THRESHOLD); } static struct mxc_usbh_platform_data dr_utmi_config = { .init = initialize_otg_port, .portsc = MXC_EHCI_UTMI_16BIT, - .flags = MXC_EHCI_INTERNAL_PHY, }; static struct fsl_usb2_platform_data usb_pdata = { @@ -219,7 +225,6 @@ static struct fsl_usb2_platform_data usb_pdata = { static struct mxc_usbh_platform_data usbh1_config = { .init = initialize_usbh1_port, .portsc = MXC_EHCI_MODE_ULPI, - .flags = (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD), }; static int otg_mode_host; diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c index 6c3b445e395..f38b341ac40 100644 --- a/arch/arm/mach-mx5/board-cpuimx51sd.c +++ b/arch/arm/mach-mx5/board-cpuimx51sd.c @@ -167,7 +167,10 @@ static int initialize_otg_port(struct platform_device *pdev) v |= MX51_USB_PLL_DIV_19_2_MHZ; __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); iounmap(usb_base); - return 0; + + mdelay(10); + + return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY); } static int initialize_usbh1_port(struct platform_device *pdev) @@ -186,13 +189,16 @@ static int initialize_usbh1_port(struct platform_device *pdev) __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET); iounmap(usb_base); - return 0; + + mdelay(10); + + return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED | + MXC_EHCI_ITC_NO_THRESHOLD); } static struct mxc_usbh_platform_data dr_utmi_config = { .init = initialize_otg_port, .portsc = MXC_EHCI_UTMI_16BIT, - .flags = MXC_EHCI_INTERNAL_PHY, }; static struct fsl_usb2_platform_data usb_pdata = { @@ -203,7 +209,6 @@ static struct fsl_usb2_platform_data usb_pdata = { static struct mxc_usbh_platform_data usbh1_config = { .init = initialize_usbh1_port, .portsc = MXC_EHCI_MODE_ULPI, - .flags = (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD), }; static int otg_mode_host; diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index 2bd9c9e4e6b..7874bcd41db 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -259,7 +259,10 @@ static int initialize_otg_port(struct platform_device *pdev) v |= MX51_USB_PLL_DIV_19_2_MHZ; __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); iounmap(usb_base); - return 0; + + mdelay(10); + + return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY); } static int initialize_usbh1_port(struct platform_device *pdev) @@ -277,13 +280,16 @@ static int initialize_usbh1_port(struct platform_device *pdev) v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET); __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET); iounmap(usb_base); - return 0; + + mdelay(10); + + return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED | + MXC_EHCI_ITC_NO_THRESHOLD); } static struct mxc_usbh_platform_data dr_utmi_config = { .init = initialize_otg_port, .portsc = MXC_EHCI_UTMI_16BIT, - .flags = MXC_EHCI_INTERNAL_PHY, }; static struct fsl_usb2_platform_data usb_pdata = { @@ -294,7 +300,6 @@ static struct fsl_usb2_platform_data usb_pdata = { static struct mxc_usbh_platform_data usbh1_config = { .init = initialize_usbh1_port, .portsc = MXC_EHCI_MODE_ULPI, - .flags = (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD), }; static int otg_mode_host; diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c index 2aac4c5b7b5..b0fa55327c3 100644 --- a/arch/arm/mach-mx5/board-mx51_efikamx.c +++ b/arch/arm/mach-mx5/board-mx51_efikamx.c @@ -145,13 +145,15 @@ static int initialize_otg_port(struct platform_device *pdev) v |= MX51_USB_PLL_DIV_24_MHZ; __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); iounmap(usb_base); - return 0; + + mdelay(10); + + return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY); } static struct mxc_usbh_platform_data dr_utmi_config = { .init = initialize_otg_port, .portsc = MXC_EHCI_UTMI_16BIT, - .flags = MXC_EHCI_INTERNAL_PHY, }; /* PCBID2 PCBID1 PCBID0 STATE diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index 5fd20e96876..a1387875a49 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o obj-$(CONFIG_MXC_PWM) += pwm.o -obj-$(CONFIG_USB_EHCI_MXC) += ehci.o obj-$(CONFIG_MXC_ULPI) += ulpi.o obj-$(CONFIG_MXC_USE_EPIT) += epit.o obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c deleted file mode 100644 index 06fb3a4d7c2..00000000000 --- a/arch/arm/plat-mxc/ehci.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * Copyright (c) 2009 Daniel Mack - * Copyright (C) 2010 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY - * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - */ - -#include - -#include -#include - -int mxc_initialize_usb_hw(int port, unsigned int flags) -{ -#if defined(CONFIG_SOC_IMX25) - if (cpu_is_mx25()) - return mx25_initialize_usb_hw(port, flags); -#endif /* if defined(CONFIG_SOC_IMX25) */ -#if defined(CONFIG_ARCH_MX3) - if (cpu_is_mx31()) - return mx31_initialize_usb_hw(port, flags); - if (cpu_is_mx35()) - return mx35_initialize_usb_hw(port, flags); -#endif /* CONFIG_ARCH_MX3 */ -#ifdef CONFIG_MACH_MX27 - if (cpu_is_mx27()) - return mx27_initialize_usb_hw(port, flags); -#endif /* CONFIG_MACH_MX27 */ -#ifdef CONFIG_SOC_IMX51 - if (cpu_is_mx51()) - return mx51_initialize_usb_hw(port, flags); -#endif - printk(KERN_WARNING - "%s() unable to setup USBCONTROL for this CPU\n", __func__); - return -EINVAL; -} -EXPORT_SYMBOL(mxc_initialize_usb_hw); - diff --git a/arch/arm/plat-mxc/include/mach/mxc_ehci.h b/arch/arm/plat-mxc/include/mach/mxc_ehci.h index 7e555a1f4a4..2c159dc2398 100644 --- a/arch/arm/plat-mxc/include/mach/mxc_ehci.h +++ b/arch/arm/plat-mxc/include/mach/mxc_ehci.h @@ -44,12 +44,9 @@ struct mxc_usbh_platform_data { int (*exit)(struct platform_device *pdev); unsigned int portsc; - unsigned int flags; struct otg_transceiver *otg; }; -int mxc_initialize_usb_hw(int port, unsigned int flags); - int mx51_initialize_usb_hw(int port, unsigned int flags); int mx25_initialize_usb_hw(int port, unsigned int flags); int mx31_initialize_usb_hw(int port, unsigned int flags); -- cgit v1.2.3-18-g5258 From 292ec42af7c6361435fe9df50cd59ec76f6741c6 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 4 Feb 2011 10:36:39 +0000 Subject: ARM: pm: add function to set WFI low-power mode for SMP CPUs Add a function to set the SCU low-power mode for SMP CPUs. This centralizes this functionality rather than having to expose the SCU register definitions to each platform. Signed-off-by: Russell King --- arch/arm/include/asm/smp_scu.h | 7 +++++++ arch/arm/kernel/smp_scu.c | 23 +++++++++++++++++++++++ 2 files changed, 30 insertions(+) (limited to 'arch') diff --git a/arch/arm/include/asm/smp_scu.h b/arch/arm/include/asm/smp_scu.h index 2376835015d..4eb6d005ffa 100644 --- a/arch/arm/include/asm/smp_scu.h +++ b/arch/arm/include/asm/smp_scu.h @@ -1,7 +1,14 @@ #ifndef __ASMARM_ARCH_SCU_H #define __ASMARM_ARCH_SCU_H +#define SCU_PM_NORMAL 0 +#define SCU_PM_DORMANT 2 +#define SCU_PM_POWEROFF 3 + +#ifndef __ASSEMBLER__ unsigned int scu_get_core_count(void __iomem *); void scu_enable(void __iomem *); +int scu_power_mode(void __iomem *, unsigned int); +#endif #endif diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c index 9ab4149bd98..a1e757c3439 100644 --- a/arch/arm/kernel/smp_scu.c +++ b/arch/arm/kernel/smp_scu.c @@ -50,3 +50,26 @@ void __init scu_enable(void __iomem *scu_base) */ flush_cache_all(); } + +/* + * Set the executing CPUs power mode as defined. This will be in + * preparation for it executing a WFI instruction. + * + * This function must be called with preemption disabled, and as it + * has the side effect of disabling coherency, caches must have been + * flushed. Interrupts must also have been disabled. + */ +int scu_power_mode(void __iomem *scu_base, unsigned int mode) +{ + unsigned int val; + int cpu = smp_processor_id(); + + if (mode > 3 || mode == 1 || cpu > 3) + return -EINVAL; + + val = __raw_readb(scu_base + SCU_CPU_STATUS + cpu) & ~0x03; + val |= mode; + __raw_writeb(val, scu_base + SCU_CPU_STATUS + cpu); + + return 0; +} -- cgit v1.2.3-18-g5258 From 45e8234cad754f661153314ea536d26751d02834 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Tue, 8 Feb 2011 23:27:36 +0100 Subject: x86: Fix printk typo WARING Signed-off-by: Paul Bolle Signed-off-by: Jiri Kosina --- arch/x86/kernel/apic/io_apic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 697dc34b7b8..303be814ddd 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -4026,7 +4026,7 @@ int mp_find_ioapic_pin(int ioapic, u32 gsi) static int bad_ioapic(unsigned long address) { if (nr_ioapics >= MAX_IO_APICS) { - printk(KERN_WARNING "WARING: Max # of I/O APICs (%d) exceeded " + printk(KERN_WARNING "WARNING: Max # of I/O APICs (%d) exceeded " "(found %d), skipping\n", MAX_IO_APICS, nr_ioapics); return 1; } -- cgit v1.2.3-18-g5258 From 21bd6d37cf23e643020bf28b41844ff0040c9393 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Fri, 21 Jan 2011 13:21:10 +0100 Subject: ARM: 6629/2: aaec2000: remove support for mach-aaec2000 mach-aaec2000 is no longer actively maintained and is only receiving fixups to remain building with other kernel updates. Cc: Bellido Nicolas Signed-off-by: Jamie Iles Signed-off-by: Russell King --- arch/arm/Kconfig | 11 - arch/arm/Makefile | 1 - arch/arm/mach-aaec2000/Kconfig | 11 - arch/arm/mach-aaec2000/Makefile | 9 - arch/arm/mach-aaec2000/Makefile.boot | 1 - arch/arm/mach-aaec2000/aaed2000.c | 102 -------- arch/arm/mach-aaec2000/core.c | 298 ---------------------- arch/arm/mach-aaec2000/core.h | 28 -- arch/arm/mach-aaec2000/include/mach/aaec2000.h | 207 --------------- arch/arm/mach-aaec2000/include/mach/aaed2000.h | 40 --- arch/arm/mach-aaec2000/include/mach/debug-macro.S | 35 --- arch/arm/mach-aaec2000/include/mach/entry-macro.S | 40 --- arch/arm/mach-aaec2000/include/mach/hardware.h | 50 ---- arch/arm/mach-aaec2000/include/mach/io.h | 18 -- arch/arm/mach-aaec2000/include/mach/irqs.h | 46 ---- arch/arm/mach-aaec2000/include/mach/memory.h | 17 -- arch/arm/mach-aaec2000/include/mach/system.h | 24 -- arch/arm/mach-aaec2000/include/mach/timex.h | 18 -- arch/arm/mach-aaec2000/include/mach/uncompress.h | 46 ---- arch/arm/mach-aaec2000/include/mach/vmalloc.h | 16 -- 20 files changed, 1018 deletions(-) delete mode 100644 arch/arm/mach-aaec2000/Kconfig delete mode 100644 arch/arm/mach-aaec2000/Makefile delete mode 100644 arch/arm/mach-aaec2000/Makefile.boot delete mode 100644 arch/arm/mach-aaec2000/aaed2000.c delete mode 100644 arch/arm/mach-aaec2000/core.c delete mode 100644 arch/arm/mach-aaec2000/core.h delete mode 100644 arch/arm/mach-aaec2000/include/mach/aaec2000.h delete mode 100644 arch/arm/mach-aaec2000/include/mach/aaed2000.h delete mode 100644 arch/arm/mach-aaec2000/include/mach/debug-macro.S delete mode 100644 arch/arm/mach-aaec2000/include/mach/entry-macro.S delete mode 100644 arch/arm/mach-aaec2000/include/mach/hardware.h delete mode 100644 arch/arm/mach-aaec2000/include/mach/io.h delete mode 100644 arch/arm/mach-aaec2000/include/mach/irqs.h delete mode 100644 arch/arm/mach-aaec2000/include/mach/memory.h delete mode 100644 arch/arm/mach-aaec2000/include/mach/system.h delete mode 100644 arch/arm/mach-aaec2000/include/mach/timex.h delete mode 100644 arch/arm/mach-aaec2000/include/mach/uncompress.h delete mode 100644 arch/arm/mach-aaec2000/include/mach/vmalloc.h (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 18a1eb93fd7..83e85134df6 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -212,15 +212,6 @@ choice prompt "ARM system type" default ARCH_VERSATILE -config ARCH_AAEC2000 - bool "Agilent AAEC-2000 based" - select CPU_ARM920T - select ARM_AMBA - select HAVE_CLK - select ARCH_USES_GETTIMEOFFSET - help - This enables support for systems based on the Agilent AAEC-2000 - config ARCH_INTEGRATOR bool "ARM Ltd. Integrator family" select ARM_AMBA @@ -871,8 +862,6 @@ endchoice # Kconfigs may be included either alphabetically (according to the # plat- suffix) or along side the corresponding mach-* source. # -source "arch/arm/mach-aaec2000/Kconfig" - source "arch/arm/mach-at91/Kconfig" source "arch/arm/mach-bcmring/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index aa18cb9da57..16d16cd6c28 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -126,7 +126,6 @@ endif # Machine directory name. This list is sorted alphanumerically # by CONFIG_* macro name. -machine-$(CONFIG_ARCH_AAEC2000) := aaec2000 machine-$(CONFIG_ARCH_AT91) := at91 machine-$(CONFIG_ARCH_BCMRING) := bcmring machine-$(CONFIG_ARCH_CLPS711X) := clps711x diff --git a/arch/arm/mach-aaec2000/Kconfig b/arch/arm/mach-aaec2000/Kconfig deleted file mode 100644 index 5e4bef93754..00000000000 --- a/arch/arm/mach-aaec2000/Kconfig +++ /dev/null @@ -1,11 +0,0 @@ -if ARCH_AAEC2000 - -menu "Agilent AAEC-2000 Implementations" - -config MACH_AAED2000 - bool "Agilent AAED-2000 Development Platform" - select CPU_ARM920T - -endmenu - -endif diff --git a/arch/arm/mach-aaec2000/Makefile b/arch/arm/mach-aaec2000/Makefile deleted file mode 100644 index 20ec83896c3..00000000000 --- a/arch/arm/mach-aaec2000/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Makefile for the linux kernel. -# - -# Common support (must be linked before board specific support) -obj-y += core.o - -# Specific board support -obj-$(CONFIG_MACH_AAED2000) += aaed2000.o diff --git a/arch/arm/mach-aaec2000/Makefile.boot b/arch/arm/mach-aaec2000/Makefile.boot deleted file mode 100644 index 8f5a8b7c53c..00000000000 --- a/arch/arm/mach-aaec2000/Makefile.boot +++ /dev/null @@ -1 +0,0 @@ - zreladdr-y := 0xf0008000 diff --git a/arch/arm/mach-aaec2000/aaed2000.c b/arch/arm/mach-aaec2000/aaed2000.c deleted file mode 100644 index 0eb3e3e5b2d..00000000000 --- a/arch/arm/mach-aaec2000/aaed2000.c +++ /dev/null @@ -1,102 +0,0 @@ -/* - * linux/arch/arm/mach-aaec2000/aaed2000.c - * - * Support for the Agilent AAED-2000 Development Platform. - * - * Copyright (c) 2005 Nicolas Bellido Y Ortega - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#include -#include -#include - -#include - -#include "core.h" - -static void aaed2000_clcd_disable(struct clcd_fb *fb) -{ - AAED_EXT_GPIO &= ~AAED_EGPIO_LCD_PWR_EN; -} - -static void aaed2000_clcd_enable(struct clcd_fb *fb) -{ - AAED_EXT_GPIO |= AAED_EGPIO_LCD_PWR_EN; -} - -struct aaec2000_clcd_info clcd_info = { - .enable = aaed2000_clcd_enable, - .disable = aaed2000_clcd_disable, - .panel = { - .mode = { - .name = "Sharp", - .refresh = 60, - .xres = 640, - .yres = 480, - .pixclock = 39721, - .left_margin = 20, - .right_margin = 44, - .upper_margin = 21, - .lower_margin = 34, - .hsync_len = 96, - .vsync_len = 2, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_IVS | TIM2_IHS, - .cntl = CNTL_LCDTFT, - .bpp = 16, - }, -}; - -static void __init aaed2000_init_irq(void) -{ - aaec2000_init_irq(); -} - -static void __init aaed2000_init(void) -{ - aaec2000_set_clcd_plat_data(&clcd_info); -} - -static struct map_desc aaed2000_io_desc[] __initdata = { - { - .virtual = EXT_GPIO_VBASE, - .pfn = __phys_to_pfn(EXT_GPIO_PBASE), - .length = EXT_GPIO_LENGTH, - .type = MT_DEVICE - }, -}; - -static void __init aaed2000_map_io(void) -{ - aaec2000_map_io(); - iotable_init(aaed2000_io_desc, ARRAY_SIZE(aaed2000_io_desc)); -} - -MACHINE_START(AAED2000, "Agilent AAED-2000 Development Platform") - /* Maintainer: Nicolas Bellido Y Ortega */ - .map_io = aaed2000_map_io, - .init_irq = aaed2000_init_irq, - .timer = &aaec2000_timer, - .init_machine = aaed2000_init, -MACHINE_END diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c deleted file mode 100644 index f8465bd17e6..00000000000 --- a/arch/arm/mach-aaec2000/core.c +++ /dev/null @@ -1,298 +0,0 @@ -/* - * linux/arch/arm/mach-aaec2000/core.c - * - * Code common to all AAEC-2000 machines - * - * Copyright (c) 2005 Nicolas Bellido Y Ortega - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include - -#include "core.h" - -/* - * Common I/O mapping: - * - * Static virtual address mappings are as follow: - * - * 0xf8000000-0xf8001ffff: Devices connected to APB bus - * 0xf8002000-0xf8003ffff: Devices connected to AHB bus - * - * Below 0xe8000000 is reserved for vm allocation. - * - * The machine specific code must provide the extra mapping beside the - * default mapping provided here. - */ -static struct map_desc standard_io_desc[] __initdata = { - { - .virtual = VIO_APB_BASE, - .pfn = __phys_to_pfn(PIO_APB_BASE), - .length = IO_APB_LENGTH, - .type = MT_DEVICE - }, { - .virtual = VIO_AHB_BASE, - .pfn = __phys_to_pfn(PIO_AHB_BASE), - .length = IO_AHB_LENGTH, - .type = MT_DEVICE - } -}; - -void __init aaec2000_map_io(void) -{ - iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc)); -} - -/* - * Interrupt handling routines - */ -static void aaec2000_int_ack(struct irq_data *d) -{ - IRQ_INTSR = 1 << d->irq; -} - -static void aaec2000_int_mask(struct irq_data *d) -{ - IRQ_INTENC |= (1 << d->irq); -} - -static void aaec2000_int_unmask(struct irq_data *d) -{ - IRQ_INTENS |= (1 << d->irq); -} - -static struct irq_chip aaec2000_irq_chip = { - .irq_ack = aaec2000_int_ack, - .irq_mask = aaec2000_int_mask, - .irq_unmask = aaec2000_int_unmask, -}; - -void __init aaec2000_init_irq(void) -{ - unsigned int i; - - for (i = 0; i < NR_IRQS; i++) { - set_irq_handler(i, handle_level_irq); - set_irq_chip(i, &aaec2000_irq_chip); - set_irq_flags(i, IRQF_VALID); - } - - /* Disable all interrupts */ - IRQ_INTENC = 0xffffffff; - - /* Clear any pending interrupts */ - IRQ_INTSR = IRQ_INTSR; -} - -/* - * Time keeping - */ -/* IRQs are disabled before entering here from do_gettimeofday() */ -static unsigned long aaec2000_gettimeoffset(void) -{ - unsigned long ticks_to_match, elapsed, usec; - - /* Get ticks before next timer match */ - ticks_to_match = TIMER1_LOAD - TIMER1_VAL; - - /* We need elapsed ticks since last match */ - elapsed = LATCH - ticks_to_match; - - /* Now, convert them to usec */ - usec = (unsigned long)(elapsed * (tick_nsec / 1000))/LATCH; - - return usec; -} - -/* We enter here with IRQs enabled */ -static irqreturn_t -aaec2000_timer_interrupt(int irq, void *dev_id) -{ - /* TODO: Check timer accuracy */ - timer_tick(); - TIMER1_CLEAR = 1; - - return IRQ_HANDLED; -} - -static struct irqaction aaec2000_timer_irq = { - .name = "AAEC-2000 Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = aaec2000_timer_interrupt, -}; - -static void __init aaec2000_timer_init(void) -{ - /* Disable timer 1 */ - TIMER1_CTRL = 0; - - /* We have somehow to generate a 100Hz clock. - * We then use the 508KHz timer in periodic mode. - */ - TIMER1_LOAD = LATCH; - TIMER1_CLEAR = 1; /* Clear interrupt */ - - setup_irq(INT_TMR1_OFL, &aaec2000_timer_irq); - - TIMER1_CTRL = TIMER_CTRL_ENABLE | - TIMER_CTRL_PERIODIC | - TIMER_CTRL_CLKSEL_508K; -} - -struct sys_timer aaec2000_timer = { - .init = aaec2000_timer_init, - .offset = aaec2000_gettimeoffset, -}; - -static struct clcd_panel mach_clcd_panel; - -static int aaec2000_clcd_setup(struct clcd_fb *fb) -{ - dma_addr_t dma; - - fb->panel = &mach_clcd_panel; - - fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, SZ_1M, - &dma, GFP_KERNEL); - - if (!fb->fb.screen_base) { - printk(KERN_ERR "CLCD: unable to map framebuffer\n"); - return -ENOMEM; - } - - fb->fb.fix.smem_start = dma; - fb->fb.fix.smem_len = SZ_1M; - - return 0; -} - -static int aaec2000_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) -{ - return dma_mmap_writecombine(&fb->dev->dev, vma, - fb->fb.screen_base, - fb->fb.fix.smem_start, - fb->fb.fix.smem_len); -} - -static void aaec2000_clcd_remove(struct clcd_fb *fb) -{ - dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, - fb->fb.screen_base, fb->fb.fix.smem_start); -} - -static struct clcd_board clcd_plat_data = { - .name = "AAEC-2000", - .check = clcdfb_check, - .decode = clcdfb_decode, - .setup = aaec2000_clcd_setup, - .mmap = aaec2000_clcd_mmap, - .remove = aaec2000_clcd_remove, -}; - -static struct amba_device clcd_device = { - .dev = { - .init_name = "mb:16", - .coherent_dma_mask = ~0, - .platform_data = &clcd_plat_data, - }, - .res = { - .start = AAEC_CLCD_PHYS, - .end = AAEC_CLCD_PHYS + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { INT_LCD, NO_IRQ }, - .periphid = 0x41110, -}; - -static struct amba_device *amba_devs[] __initdata = { - &clcd_device, -}; - -void clk_disable(struct clk *clk) -{ -} - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - return 0; -} - -int clk_enable(struct clk *clk) -{ - return 0; -} - -struct clk *clk_get(struct device *dev, const char *id) -{ - return dev && strcmp(dev_name(dev), "mb:16") == 0 ? NULL : ERR_PTR(-ENOENT); -} - -void clk_put(struct clk *clk) -{ -} - -void __init aaec2000_set_clcd_plat_data(struct aaec2000_clcd_info *clcd) -{ - clcd_plat_data.enable = clcd->enable; - clcd_plat_data.disable = clcd->disable; - memcpy(&mach_clcd_panel, &clcd->panel, sizeof(struct clcd_panel)); -} - -static struct flash_platform_data aaec2000_flash_data = { - .map_name = "cfi_probe", - .width = 4, -}; - -static struct resource aaec2000_flash_resource = { - .start = AAEC_FLASH_BASE, - .end = AAEC_FLASH_BASE + AAEC_FLASH_SIZE, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device aaec2000_flash_device = { - .name = "armflash", - .id = 0, - .dev = { - .platform_data = &aaec2000_flash_data, - }, - .num_resources = 1, - .resource = &aaec2000_flash_resource, -}; - -static int __init aaec2000_init(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { - struct amba_device *d = amba_devs[i]; - amba_device_register(d, &iomem_resource); - } - - platform_device_register(&aaec2000_flash_device); - - return 0; -}; -arch_initcall(aaec2000_init); - diff --git a/arch/arm/mach-aaec2000/core.h b/arch/arm/mach-aaec2000/core.h deleted file mode 100644 index 59501b57316..00000000000 --- a/arch/arm/mach-aaec2000/core.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * linux/arch/arm/mach-aaec2000/core.h - * - * Copyright (c) 2005 Nicolas Bellido Y Ortega - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include -#include - -struct sys_timer; - -extern struct sys_timer aaec2000_timer; -extern void __init aaec2000_map_io(void); -extern void __init aaec2000_init_irq(void); - -struct aaec2000_clcd_info { - struct clcd_panel panel; - void (*disable)(struct clcd_fb *); - void (*enable)(struct clcd_fb *); -}; - -extern void __init aaec2000_set_clcd_plat_data(struct aaec2000_clcd_info *); - diff --git a/arch/arm/mach-aaec2000/include/mach/aaec2000.h b/arch/arm/mach-aaec2000/include/mach/aaec2000.h deleted file mode 100644 index bc729c42f84..00000000000 --- a/arch/arm/mach-aaec2000/include/mach/aaec2000.h +++ /dev/null @@ -1,207 +0,0 @@ -/* - * arch/arm/mach-aaec2000/include/mach/aaec2000.h - * - * AAEC-2000 registers definition - * - * Copyright (c) 2005 Nicolas Bellido Y Ortega - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_AAEC2000_H -#define __ASM_ARCH_AAEC2000_H - -#ifndef __ASM_ARCH_HARDWARE_H -#error You must include hardware.h not this file -#endif /* __ASM_ARCH_HARDWARE_H */ - -/* Chip selects */ -#define AAEC_CS0 0x00000000 -#define AAEC_CS1 0x10000000 -#define AAEC_CS2 0x20000000 -#define AAEC_CS3 0x30000000 - -/* Flash */ -#define AAEC_FLASH_BASE AAEC_CS0 -#define AAEC_FLASH_SIZE SZ_64M - -/* Interrupt controller */ -#define IRQ_BASE __REG(0x80000500) -#define IRQ_INTSR __REG(0x80000500) /* Int Status Register */ -#define IRQ_INTRSR __REG(0x80000504) /* Int Raw (unmasked) Status */ -#define IRQ_INTENS __REG(0x80000508) /* Int Enable Set */ -#define IRQ_INTENC __REG(0x8000050c) /* Int Enable Clear */ - -/* UART 1 */ -#define UART1_BASE __REG(0x80000600) -#define UART1_DR __REG(0x80000600) /* Data/FIFO Register */ -#define UART1_LCR __REG(0x80000604) /* Link Control Register */ -#define UART1_BRCR __REG(0x80000608) /* Baud Rate Control Register */ -#define UART1_CR __REG(0x8000060c) /* Control Register */ -#define UART1_SR __REG(0x80000610) /* Status Register */ -#define UART1_INT __REG(0x80000614) /* Interrupt Status Register */ -#define UART1_INTM __REG(0x80000618) /* Interrupt Mask Register */ -#define UART1_INTRES __REG(0x8000061c) /* Int Result (masked status) Register */ - -/* UART 2 */ -#define UART2_BASE __REG(0x80000700) -#define UART2_DR __REG(0x80000700) /* Data/FIFO Register */ -#define UART2_LCR __REG(0x80000704) /* Link Control Register */ -#define UART2_BRCR __REG(0x80000708) /* Baud Rate Control Register */ -#define UART2_CR __REG(0x8000070c) /* Control Register */ -#define UART2_SR __REG(0x80000710) /* Status Register */ -#define UART2_INT __REG(0x80000714) /* Interrupt Status Register */ -#define UART2_INTM __REG(0x80000718) /* Interrupt Mask Register */ -#define UART2_INTRES __REG(0x8000071c) /* Int Result (masked status) Register */ - -/* UART 3 */ -#define UART3_BASE __REG(0x80000800) -#define UART3_DR __REG(0x80000800) /* Data/FIFO Register */ -#define UART3_LCR __REG(0x80000804) /* Link Control Register */ -#define UART3_BRCR __REG(0x80000808) /* Baud Rate Control Register */ -#define UART3_CR __REG(0x8000080c) /* Control Register */ -#define UART3_SR __REG(0x80000810) /* Status Register */ -#define UART3_INT __REG(0x80000814) /* Interrupt Status Register */ -#define UART3_INTM __REG(0x80000818) /* Interrupt Mask Register */ -#define UART3_INTRES __REG(0x8000081c) /* Int Result (masked status) Register */ - -/* These are used in some places */ -#define _UART1_BASE __PREG(UART1_BASE) -#define _UART2_BASE __PREG(UART2_BASE) -#define _UART3_BASE __PREG(UART3_BASE) - -/* UART Registers Offsets */ -#define UART_DR 0x00 -#define UART_LCR 0x04 -#define UART_BRCR 0x08 -#define UART_CR 0x0c -#define UART_SR 0x10 -#define UART_INT 0x14 -#define UART_INTM 0x18 -#define UART_INTRES 0x1c - -/* UART_LCR Bitmask */ -#define UART_LCR_BRK (1 << 0) /* Send Break */ -#define UART_LCR_PEN (1 << 1) /* Parity Enable */ -#define UART_LCR_EP (1 << 2) /* Even/Odd Parity */ -#define UART_LCR_S2 (1 << 3) /* One/Two Stop bits */ -#define UART_LCR_FIFO (1 << 4) /* FIFO Enable */ -#define UART_LCR_WL5 (0 << 5) /* Word Length - 5 bits */ -#define UART_LCR_WL6 (1 << 5) /* Word Length - 6 bits */ -#define UART_LCR_WL7 (1 << 6) /* Word Length - 7 bits */ -#define UART_LCR_WL8 (1 << 7) /* Word Length - 8 bits */ - -/* UART_CR Bitmask */ -#define UART_CR_EN (1 << 0) /* UART Enable */ -#define UART_CR_SIR (1 << 1) /* IrDA SIR Enable */ -#define UART_CR_SIRLP (1 << 2) /* Low Power IrDA Enable */ -#define UART_CR_RXP (1 << 3) /* Receive Pin Polarity */ -#define UART_CR_TXP (1 << 4) /* Transmit Pin Polarity */ -#define UART_CR_MXP (1 << 5) /* Modem Pin Polarity */ -#define UART_CR_LOOP (1 << 6) /* Loopback Mode */ - -/* UART_SR Bitmask */ -#define UART_SR_CTS (1 << 0) /* Clear To Send Status */ -#define UART_SR_DSR (1 << 1) /* Data Set Ready Status */ -#define UART_SR_DCD (1 << 2) /* Data Carrier Detect Status */ -#define UART_SR_TxBSY (1 << 3) /* Transmitter Busy Status */ -#define UART_SR_RxFE (1 << 4) /* Receive FIFO Empty Status */ -#define UART_SR_TxFF (1 << 5) /* Transmit FIFO Full Status */ -#define UART_SR_RxFF (1 << 6) /* Receive FIFO Full Status */ -#define UART_SR_TxFE (1 << 7) /* Transmit FIFO Empty Status */ - -/* UART_INT Bitmask */ -#define UART_INT_RIS (1 << 0) /* Rx Interrupt */ -#define UART_INT_TIS (1 << 1) /* Tx Interrupt */ -#define UART_INT_MIS (1 << 2) /* Modem Interrupt */ -#define UART_INT_RTIS (1 << 3) /* Receive Timeout Interrupt */ - -/* Timer 1 */ -#define TIMER1_BASE __REG(0x80000c00) -#define TIMER1_LOAD __REG(0x80000c00) /* Timer 1 Load Register */ -#define TIMER1_VAL __REG(0x80000c04) /* Timer 1 Value Register */ -#define TIMER1_CTRL __REG(0x80000c08) /* Timer 1 Control Register */ -#define TIMER1_CLEAR __REG(0x80000c0c) /* Timer 1 Clear Register */ - -/* Timer 2 */ -#define TIMER2_BASE __REG(0x80000d00) -#define TIMER2_LOAD __REG(0x80000d00) /* Timer 2 Load Register */ -#define TIMER2_VAL __REG(0x80000d04) /* Timer 2 Value Register */ -#define TIMER2_CTRL __REG(0x80000d08) /* Timer 2 Control Register */ -#define TIMER2_CLEAR __REG(0x80000d0c) /* Timer 2 Clear Register */ - -/* Timer 3 */ -#define TIMER3_BASE __REG(0x80000e00) -#define TIMER3_LOAD __REG(0x80000e00) /* Timer 3 Load Register */ -#define TIMER3_VAL __REG(0x80000e04) /* Timer 3 Value Register */ -#define TIMER3_CTRL __REG(0x80000e08) /* Timer 3 Control Register */ -#define TIMER3_CLEAR __REG(0x80000e0c) /* Timer 3 Clear Register */ - -/* Timer Control register bits */ -#define TIMER_CTRL_ENABLE (1 << 7) /* Enable (Start Timer) */ -#define TIMER_CTRL_PERIODIC (1 << 6) /* Periodic Running Mode */ -#define TIMER_CTRL_FREE_RUNNING (0 << 6) /* Normal Running Mode */ -#define TIMER_CTRL_CLKSEL_508K (1 << 3) /* 508KHz Clock select (Timer 1, 2) */ -#define TIMER_CTRL_CLKSEL_2K (0 << 3) /* 2KHz Clock Select (Timer 1, 2) */ - -/* Power and State Control */ -#define POWER_BASE __REG(0x80000400) -#define POWER_PWRSR __REG(0x80000400) /* Power Status Register */ -#define POWER_PWRCNT __REG(0x80000404) /* Power/Clock control */ -#define POWER_HALT __REG(0x80000408) /* Power Idle Mode */ -#define POWER_STDBY __REG(0x8000040c) /* Power Standby Mode */ -#define POWER_BLEOI __REG(0x80000410) /* Battery Low End of Interrupt */ -#define POWER_MCEOI __REG(0x80000414) /* Media Changed EoI */ -#define POWER_TEOI __REG(0x80000418) /* Tick EoI */ -#define POWER_STFCLR __REG(0x8000041c) /* NbFlg, RSTFlg, PFFlg, CLDFlg Clear */ -#define POWER_CLKSET __REG(0x80000420) /* Clock Speed Control */ - -/* GPIO Registers */ -#define AAEC_GPIO_PHYS 0x80000e00 - -#define AAEC_GPIO_PADR __REG(AAEC_GPIO_PHYS + 0x00) -#define AAEC_GPIO_PBDR __REG(AAEC_GPIO_PHYS + 0x04) -#define AAEC_GPIO_PCDR __REG(AAEC_GPIO_PHYS + 0x08) -#define AAEC_GPIO_PDDR __REG(AAEC_GPIO_PHYS + 0x0c) -#define AAEC_GPIO_PADDR __REG(AAEC_GPIO_PHYS + 0x10) -#define AAEC_GPIO_PBDDR __REG(AAEC_GPIO_PHYS + 0x14) -#define AAEC_GPIO_PCDDR __REG(AAEC_GPIO_PHYS + 0x18) -#define AAEC_GPIO_PDDDR __REG(AAEC_GPIO_PHYS + 0x1c) -#define AAEC_GPIO_PEDR __REG(AAEC_GPIO_PHYS + 0x20) -#define AAEC_GPIO_PEDDR __REG(AAEC_GPIO_PHYS + 0x24) -#define AAEC_GPIO_KSCAN __REG(AAEC_GPIO_PHYS + 0x28) -#define AAEC_GPIO_PINMUX __REG(AAEC_GPIO_PHYS + 0x2c) -#define AAEC_GPIO_PFDR __REG(AAEC_GPIO_PHYS + 0x30) -#define AAEC_GPIO_PFDDR __REG(AAEC_GPIO_PHYS + 0x34) -#define AAEC_GPIO_PGDR __REG(AAEC_GPIO_PHYS + 0x38) -#define AAEC_GPIO_PGDDR __REG(AAEC_GPIO_PHYS + 0x3c) -#define AAEC_GPIO_PHDR __REG(AAEC_GPIO_PHYS + 0x40) -#define AAEC_GPIO_PHDDR __REG(AAEC_GPIO_PHYS + 0x44) -#define AAEC_GPIO_RAZ __REG(AAEC_GPIO_PHYS + 0x48) -#define AAEC_GPIO_INTTYPE1 __REG(AAEC_GPIO_PHYS + 0x4c) -#define AAEC_GPIO_INTTYPE2 __REG(AAEC_GPIO_PHYS + 0x50) -#define AAEC_GPIO_FEOI __REG(AAEC_GPIO_PHYS + 0x54) -#define AAEC_GPIO_INTEN __REG(AAEC_GPIO_PHYS + 0x58) -#define AAEC_GPIO_INTSTATUS __REG(AAEC_GPIO_PHYS + 0x5c) -#define AAEC_GPIO_RAWINTSTATUS __REG(AAEC_GPIO_PHYS + 0x60) -#define AAEC_GPIO_DB __REG(AAEC_GPIO_PHYS + 0x64) -#define AAEC_GPIO_PAPINDR __REG(AAEC_GPIO_PHYS + 0x68) -#define AAEC_GPIO_PBPINDR __REG(AAEC_GPIO_PHYS + 0x6c) -#define AAEC_GPIO_PCPINDR __REG(AAEC_GPIO_PHYS + 0x70) -#define AAEC_GPIO_PDPINDR __REG(AAEC_GPIO_PHYS + 0x74) -#define AAEC_GPIO_PEPINDR __REG(AAEC_GPIO_PHYS + 0x78) -#define AAEC_GPIO_PFPINDR __REG(AAEC_GPIO_PHYS + 0x7c) -#define AAEC_GPIO_PGPINDR __REG(AAEC_GPIO_PHYS + 0x80) -#define AAEC_GPIO_PHPINDR __REG(AAEC_GPIO_PHYS + 0x84) - -#define AAEC_GPIO_PINMUX_PE0CON (1 << 0) -#define AAEC_GPIO_PINMUX_PD0CON (1 << 1) -#define AAEC_GPIO_PINMUX_CODECON (1 << 2) -#define AAEC_GPIO_PINMUX_UART3CON (1 << 3) - -/* LCD Controller */ -#define AAEC_CLCD_PHYS 0x80003000 - -#endif /* __ARM_ARCH_AAEC2000_H */ diff --git a/arch/arm/mach-aaec2000/include/mach/aaed2000.h b/arch/arm/mach-aaec2000/include/mach/aaed2000.h deleted file mode 100644 index f821295ca71..00000000000 --- a/arch/arm/mach-aaec2000/include/mach/aaed2000.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * arch/arm/mach-aaec2000/include/mach/aaed2000.h - * - * AAED-2000 specific bits definition - * - * Copyright (c) 2005 Nicolas Bellido Y Ortega - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_AAED2000_H -#define __ASM_ARCH_AAED2000_H - -/* External GPIOs. */ - -#define EXT_GPIO_PBASE AAEC_CS3 -#define EXT_GPIO_VBASE 0xf8100000 -#define EXT_GPIO_LENGTH 0x00001000 - -#define __ext_gpio_p2v(x) ((x) - EXT_GPIO_PBASE + EXT_GPIO_VBASE) -#define __ext_gpio_v2p(x) ((x) + EXT_GPIO_PBASE - EXT_GPIO_VBASE) - -#define __EXT_GPIO_REG(x) (*((volatile u32 *)__ext_gpio_p2v(x))) -#define __EXT_GPIO_PREG(x) (__ext_gpio_v2p((u32)&(x))) - -#define AAED_EXT_GPIO __EXT_GPIO_REG(EXT_GPIO_PBASE) - -#define AAED_EGPIO_KBD_SCAN 0x00003fff /* Keyboard scan data */ -#define AAED_EGPIO_PWR_INT 0x00008fff /* Smart battery charger interrupt */ -#define AAED_EGPIO_SWITCHED 0x000f0000 /* DIP Switches */ -#define AAED_EGPIO_USB_VBUS 0x00400000 /* USB Vbus sense */ -#define AAED_EGPIO_LCD_PWR_EN 0x02000000 /* LCD and backlight PWR enable */ -#define AAED_EGPIO_nLED0 0x20000000 /* LED 0 */ -#define AAED_EGPIO_nLED1 0x20000000 /* LED 1 */ -#define AAED_EGPIO_nLED2 0x20000000 /* LED 2 */ - - -#endif /* __ARM_ARCH_AAED2000_H */ diff --git a/arch/arm/mach-aaec2000/include/mach/debug-macro.S b/arch/arm/mach-aaec2000/include/mach/debug-macro.S deleted file mode 100644 index bc7ad5561c4..00000000000 --- a/arch/arm/mach-aaec2000/include/mach/debug-macro.S +++ /dev/null @@ -1,35 +0,0 @@ -/* arch/arm/mach-aaec2000/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (c) 2005 Nicolas Bellido Y Ortega - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include "hardware.h" - .macro addruart, rp, rv - mov \rp, 0x00000800 - orr \rv, \rp, #io_p2v(0x80000000) @ virtual - orr \rp, \rp, #0x80000000 @ physical - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #0] - .endm - - .macro busyuart,rd,rx -1002: ldr \rd, [\rx, #0x10] - tst \rd, #(1 << 7) - beq 1002b - .endm - - .macro waituart,rd,rx -#if 0 -1001: ldr \rd, [\rx, #0x10] - tst \rd, #(1 << 5) - beq 1001b -#endif - .endm diff --git a/arch/arm/mach-aaec2000/include/mach/entry-macro.S b/arch/arm/mach-aaec2000/include/mach/entry-macro.S deleted file mode 100644 index c8fb3446900..00000000000 --- a/arch/arm/mach-aaec2000/include/mach/entry-macro.S +++ /dev/null @@ -1,40 +0,0 @@ -/* - * arch/arm/mach-aaec2000/include/mach/entry-macro.S - * - * Low-level IRQ helper for aaec-2000 based platforms - * - * Copyright (c) 2005 Nicolas Bellido Y Ortega - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - mov r4, #0xf8000000 - add r4, r4, #0x00000500 - mov \base, r4 - ldr \irqstat, [\base, #0] - cmp \irqstat, #0 - bne 1001f - ldr \irqnr, =NR_IRQS+1 - b 1003f -1001: mov \irqnr, #0 -1002: ands \tmp, \irqstat, #1 - mov \irqstat, \irqstat, LSR #1 - add \irqnr, \irqnr, #1 - beq 1002b - sub \irqnr, \irqnr, #1 -1003: - .endm diff --git a/arch/arm/mach-aaec2000/include/mach/hardware.h b/arch/arm/mach-aaec2000/include/mach/hardware.h deleted file mode 100644 index 965a6f6672d..00000000000 --- a/arch/arm/mach-aaec2000/include/mach/hardware.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * arch/arm/mach-aaec2000/include/mach/hardware.h - * - * Copyright (c) 2005 Nicolas Bellido Y Ortega - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include -#include - -/* The kernel is loaded at physical address 0xf8000000. - * We map the IO space a bit after - */ -#define PIO_APB_BASE 0x80000000 -#define VIO_APB_BASE 0xf8000000 -#define IO_APB_LENGTH 0x2000 -#define PIO_AHB_BASE 0x80002000 -#define VIO_AHB_BASE 0xf8002000 -#define IO_AHB_LENGTH 0x2000 - -#define VIO_BASE VIO_APB_BASE -#define PIO_BASE PIO_APB_BASE - -#define io_p2v(x) ( (x) - PIO_BASE + VIO_BASE ) -#define io_v2p(x) ( (x) + PIO_BASE - VIO_BASE ) - -#ifndef __ASSEMBLY__ - -#include - -/* FIXME: Is it needed to optimize this a la pxa ?? */ -#define __REG(x) (*((volatile u32 *)io_p2v(x))) -#define __PREG(x) (io_v2p((u32)&(x))) - -#else /* __ASSEMBLY__ */ - -#define __REG(x) io_p2v(x) -#define __PREG(x) io_v2p(x) - -#endif - -#include "aaec2000.h" - -#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-aaec2000/include/mach/io.h b/arch/arm/mach-aaec2000/include/mach/io.h deleted file mode 100644 index ab4fe5d20ea..00000000000 --- a/arch/arm/mach-aaec2000/include/mach/io.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * arch/arm/mach-aaec2000/include/mach/io.h - * - * Copied from asm/arch/sa1100/io.h - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * We don't actually have real ISA nor PCI buses, but there is so many - * drivers out there that might just work if we fake them... - */ -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#endif diff --git a/arch/arm/mach-aaec2000/include/mach/irqs.h b/arch/arm/mach-aaec2000/include/mach/irqs.h deleted file mode 100644 index bf45c6d2f29..00000000000 --- a/arch/arm/mach-aaec2000/include/mach/irqs.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * arch/arm/mach-aaec2000/include/mach/irqs.h - * - * Copyright (c) 2005 Nicolas Bellido Y Ortega - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - - -#define INT_GPIOF0_FIQ 0 /* External GPIO Port F O Fast Interrupt Input */ -#define INT_BL_FIQ 1 /* Battery Low Fast Interrupt */ -#define INT_WE_FIQ 2 /* Watchdog Expired Fast Interrupt */ -#define INT_MV_FIQ 3 /* Media Changed Interrupt */ -#define INT_SC 4 /* Sound Codec Interrupt */ -#define INT_GPIO1 5 /* GPIO Port F Configurable Int 1 */ -#define INT_GPIO2 6 /* GPIO Port F Configurable Int 2 */ -#define INT_GPIO3 7 /* GPIO Port F Configurable Int 3 */ -#define INT_TMR1_OFL 8 /* Timer 1 Overflow Interrupt */ -#define INT_TMR2_OFL 9 /* Timer 2 Overflow Interrupt */ -#define INT_RTC_CM 10 /* RTC Compare Match Interrupt */ -#define INT_TICK 11 /* 64Hz Tick Interrupt */ -#define INT_UART1 12 /* UART1 Interrupt */ -#define INT_UART2 13 /* UART2 & Modem State Changed Interrupt */ -#define INT_LCD 14 /* LCD Interrupt */ -#define INT_SSI 15 /* SSI End of Transfer Interrupt */ -#define INT_UART3 16 /* UART3 Interrupt */ -#define INT_SCI 17 /* SCI Interrupt */ -#define INT_AAC 18 /* Advanced Audio Codec Interrupt */ -#define INT_MMC 19 /* MMC Interrupt */ -#define INT_USB 20 /* USB Interrupt */ -#define INT_DMA 21 /* DMA Interrupt */ -#define INT_TMR3_UOFL 22 /* Timer 3 Underflow Interrupt */ -#define INT_GPIO4 23 /* GPIO Port F Configurable Int 4 */ -#define INT_GPIO5 24 /* GPIO Port F Configurable Int 4 */ -#define INT_GPIO6 25 /* GPIO Port F Configurable Int 4 */ -#define INT_GPIO7 26 /* GPIO Port F Configurable Int 4 */ -#define INT_BMI 27 /* BMI Interrupt */ - -#define NR_IRQS (INT_BMI + 1) - -#endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-aaec2000/include/mach/memory.h b/arch/arm/mach-aaec2000/include/mach/memory.h deleted file mode 100644 index 4f93c567a35..00000000000 --- a/arch/arm/mach-aaec2000/include/mach/memory.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * arch/arm/mach-aaec2000/include/mach/memory.h - * - * Copyright (c) 2005 Nicolas Bellido Y Ortega - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - - -#define PHYS_OFFSET UL(0xf0000000) - -#endif /* __ASM_ARCH_MEMORY_H */ diff --git a/arch/arm/mach-aaec2000/include/mach/system.h b/arch/arm/mach-aaec2000/include/mach/system.h deleted file mode 100644 index fe08ca1add6..00000000000 --- a/arch/arm/mach-aaec2000/include/mach/system.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * arch/arm/mach-aaed2000/include/mach/system.h - * - * Copyright (c) 2005 Nicolas Bellido Y Ortega - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode, const char *cmd) -{ - cpu_reset(0); -} - -#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/arch/arm/mach-aaec2000/include/mach/timex.h b/arch/arm/mach-aaec2000/include/mach/timex.h deleted file mode 100644 index 6c8edf4a882..00000000000 --- a/arch/arm/mach-aaec2000/include/mach/timex.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * arch/arm/mach-aaec2000/include/mach/timex.h - * - * AAEC-2000 Architecture timex specification - * - * Copyright (c) 2005 Nicolas Bellido Y Ortega - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -#define CLOCK_TICK_RATE 508000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-aaec2000/include/mach/uncompress.h b/arch/arm/mach-aaec2000/include/mach/uncompress.h deleted file mode 100644 index 381ecad1a1b..00000000000 --- a/arch/arm/mach-aaec2000/include/mach/uncompress.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * arch/arm/mach-aaec2000/include/mach/uncompress.h - * - * Copyright (c) 2005 Nicolas Bellido Y Ortega - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include "hardware.h" - -#define UART(x) (*(volatile unsigned long *)(serial_port + (x))) - -static void putc(int c) -{ - unsigned long serial_port; - do { - serial_port = _UART3_BASE; - if (UART(UART_CR) & UART_CR_EN) break; - serial_port = _UART1_BASE; - if (UART(UART_CR) & UART_CR_EN) break; - serial_port = _UART2_BASE; - if (UART(UART_CR) & UART_CR_EN) break; - return; - } while (0); - - /* wait for space in the UART's transmitter */ - while ((UART(UART_SR) & UART_SR_TxFF)) - barrier(); - - /* send the character out. */ - UART(UART_DR) = c; -} - -static inline void flush(void) -{ -} - -#define arch_decomp_setup() -#define arch_decomp_wdog() - -#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-aaec2000/include/mach/vmalloc.h b/arch/arm/mach-aaec2000/include/mach/vmalloc.h deleted file mode 100644 index a6299e8321b..00000000000 --- a/arch/arm/mach-aaec2000/include/mach/vmalloc.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * arch/arm/mach-aaec2000/include/mach/vmalloc.h - * - * Copyright (c) 2005 Nicolas Bellido Y Ortega - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_VMALLOC_H -#define __ASM_ARCH_VMALLOC_H - -#define VMALLOC_END 0xd0000000UL - -#endif /* __ASM_ARCH_VMALLOC_H */ -- cgit v1.2.3-18-g5258 From e134fb2b40ca7e2d96ba460b0c844c6a9fa489c3 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Fri, 11 Feb 2011 10:23:19 +0100 Subject: ARM: mx3+mx5: rename mxc_board_init to ${machine}_init MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit mxc_board_init is too generic to be useful. Additionally change some mxc_timer to ${machine}_timer, too. Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/mach-cpuimx35.c | 4 ++-- arch/arm/mach-mx3/mach-kzm_arm11_01.c | 6 +----- arch/arm/mach-mx3/mach-mx31_3ds.c | 7 ++----- arch/arm/mach-mx3/mach-mx31ads.c | 7 ++----- arch/arm/mach-mx3/mach-mx31lite.c | 4 ++-- arch/arm/mach-mx3/mach-mx31moboard.c | 4 ++-- arch/arm/mach-mx3/mach-mx35_3ds.c | 4 ++-- arch/arm/mach-mx3/mach-pcm037.c | 4 ++-- arch/arm/mach-mx3/mach-pcm043.c | 4 ++-- arch/arm/mach-mx3/mach-qong.c | 4 ++-- arch/arm/mach-mx5/board-mx51_3ds.c | 10 +++++----- arch/arm/mach-mx5/board-mx51_babbage.c | 10 +++++----- arch/arm/mach-mx5/board-mx51_efikamx.c | 10 +++++----- 13 files changed, 34 insertions(+), 44 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c index 0f2305626e1..6db0520e879 100644 --- a/arch/arm/mach-mx3/mach-cpuimx35.c +++ b/arch/arm/mach-mx3/mach-cpuimx35.c @@ -156,7 +156,7 @@ __setup("otg_mode=", eukrea_cpuimx35_otg_mode); /* * Board specific initialization. */ -static void __init mxc_board_init(void) +static void __init eukrea_cpuimx35_init(void) { mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx35_pads, ARRAY_SIZE(eukrea_cpuimx35_pads)); @@ -199,5 +199,5 @@ MACHINE_START(EUKREA_CPUIMX35, "Eukrea CPUIMX35") .init_ext3_fs = imx35_init_early, .init_irq = mx35_init_irq, .timer = &eukrea_cpuimx35_timer, - .init_machine = mxc_board_init, + .init_machine = eukrea_cpuimx35_init, MACHINE_END diff --git a/arch/arm/mach-mx3/mach-kzm_arm11_01.c b/arch/arm/mach-mx3/mach-kzm_arm11_01.c index 52b8dd7192c..d3cc7393a6b 100644 --- a/arch/arm/mach-mx3/mach-kzm_arm11_01.c +++ b/arch/arm/mach-mx3/mach-kzm_arm11_01.c @@ -266,13 +266,9 @@ static void __init kzm_timer_init(void) } static struct sys_timer kzm_timer = { - .init = kzm_timer_init, + .init = kzm_timer_init, }; -/* - * The following uses standard kernel macros define in arch.h in order to - * initialize __mach_desc_KZM_ARM11_01 data structure. - */ MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01") .boot_params = MX3x_PHYS_OFFSET + 0x100, .map_io = kzm_map_io, diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c index 2d744b27f63..0d24b3c63c8 100644 --- a/arch/arm/mach-mx3/mach-mx31_3ds.c +++ b/arch/arm/mach-mx3/mach-mx31_3ds.c @@ -327,10 +327,7 @@ static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; -/*! - * Board specific initialization. - */ -static void __init mxc_board_init(void) +static void __init mx31_3ds_init(void) { mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins), "mx31_3ds"); @@ -385,5 +382,5 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)") .init_early = imx31_init_early, .init_irq = mx31_init_irq, .timer = &mx31_3ds_timer, - .init_machine = mxc_board_init, + .init_machine = mx31_3ds_init, MACHINE_END diff --git a/arch/arm/mach-mx3/mach-mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c index 787bdc4d6cc..cb80b963820 100644 --- a/arch/arm/mach-mx3/mach-mx31ads.c +++ b/arch/arm/mach-mx3/mach-mx31ads.c @@ -524,10 +524,7 @@ static void __init mx31ads_init_irq(void) mx31ads_init_expio(); } -/*! - * Board specific initialization. - */ -static void __init mxc_board_init(void) +static void __init mx31ads_init(void) { mxc_init_extuart(); mxc_init_imx_uart(); @@ -555,5 +552,5 @@ MACHINE_START(MX31ADS, "Freescale MX31ADS") .init_early = imx31_init_early, .init_irq = mx31ads_init_irq, .timer = &mx31ads_timer, - .init_machine = mxc_board_init, + .init_machine = mx31ads_init, MACHINE_END diff --git a/arch/arm/mach-mx3/mach-mx31lite.c b/arch/arm/mach-mx3/mach-mx31lite.c index e146f1a72da..81021bf8f6b 100644 --- a/arch/arm/mach-mx3/mach-mx31lite.c +++ b/arch/arm/mach-mx3/mach-mx31lite.c @@ -229,7 +229,7 @@ void __init mx31lite_map_io(void) static int mx31lite_baseboard; core_param(mx31lite_baseboard, mx31lite_baseboard, int, 0444); -static void __init mxc_board_init(void) +static void __init mx31lite_init(void) { int ret; @@ -288,5 +288,5 @@ MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM") .init_early = imx31_init_early, .init_irq = mx31_init_irq, .timer = &mx31lite_timer, - .init_machine = mxc_board_init, + .init_machine = mx31lite_init, MACHINE_END diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c index ea880330e83..845d0b6b253 100644 --- a/arch/arm/mach-mx3/mach-mx31moboard.c +++ b/arch/arm/mach-mx3/mach-mx31moboard.c @@ -507,7 +507,7 @@ core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444); /* * Board specific initialization. */ -static void __init mxc_board_init(void) +static void __init mx31moboard_init(void) { mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins), "moboard"); @@ -573,5 +573,5 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard") .init_early = imx31_init_early, .init_irq = mx31_init_irq, .timer = &mx31moboard_timer, - .init_machine = mxc_board_init, + .init_machine = mx31moboard_init, MACHINE_END diff --git a/arch/arm/mach-mx3/mach-mx35_3ds.c b/arch/arm/mach-mx3/mach-mx35_3ds.c index dac1896a5b2..be12ac1d195 100644 --- a/arch/arm/mach-mx3/mach-mx35_3ds.c +++ b/arch/arm/mach-mx3/mach-mx35_3ds.c @@ -166,7 +166,7 @@ __setup("otg_mode=", mx35_3ds_otg_mode); /* * Board specific initialization. */ -static void __init mxc_board_init(void) +static void __init mx35_3ds_init(void) { mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads)); @@ -208,5 +208,5 @@ MACHINE_START(MX35_3DS, "Freescale MX35PDK") .init_early = imx35_init_early, .init_irq = mx35_init_irq, .timer = &mx35pdk_timer, - .init_machine = mxc_board_init, + .init_machine = mx35_3ds_init, MACHINE_END diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c index 55f95d42f71..783d31b8e8a 100644 --- a/arch/arm/mach-mx3/mach-pcm037.c +++ b/arch/arm/mach-mx3/mach-pcm037.c @@ -578,7 +578,7 @@ __setup("otg_mode=", pcm037_otg_mode); /* * Board specific initialization. */ -static void __init mxc_board_init(void) +static void __init pcm037_init(void) { int ret; @@ -690,5 +690,5 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037") .init_early = imx31_init_early, .init_irq = mx31_init_irq, .timer = &pcm037_timer, - .init_machine = mxc_board_init, + .init_machine = pcm037_init, MACHINE_END diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c index 4fa07142a9b..6c662c73aaa 100644 --- a/arch/arm/mach-mx3/mach-pcm043.c +++ b/arch/arm/mach-mx3/mach-pcm043.c @@ -351,7 +351,7 @@ __setup("otg_mode=", pcm043_otg_mode); /* * Board specific initialization. */ -static void __init mxc_board_init(void) +static void __init pcm043_init(void) { mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads)); @@ -418,5 +418,5 @@ MACHINE_START(PCM043, "Phytec Phycore pcm043") .init_early = imx35_init_early, .init_irq = mx35_init_irq, .timer = &pcm043_timer, - .init_machine = mxc_board_init, + .init_machine = pcm043_init, MACHINE_END diff --git a/arch/arm/mach-mx3/mach-qong.c b/arch/arm/mach-mx3/mach-qong.c index 064f2db25f3..002816347e6 100644 --- a/arch/arm/mach-mx3/mach-qong.c +++ b/arch/arm/mach-mx3/mach-qong.c @@ -247,7 +247,7 @@ static void __init qong_init_fpga(void) /* * Board specific initialization. */ -static void __init mxc_board_init(void) +static void __init qong_init(void) { mxc_init_imx_uart(); qong_init_nor_mtd(); @@ -275,5 +275,5 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE") .init_early = imx31_init_early, .init_irq = mx31_init_irq, .timer = &qong_timer, - .init_machine = mxc_board_init, + .init_machine = qong_init, MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c index 01684708ef3..63dfbeafbc1 100644 --- a/arch/arm/mach-mx5/board-mx51_3ds.c +++ b/arch/arm/mach-mx5/board-mx51_3ds.c @@ -133,7 +133,7 @@ static struct spi_board_info mx51_3ds_spi_nor_device[] = { /* * Board specific initialization. */ -static void __init mxc_board_init(void) +static void __init mx51_3ds_init(void) { mxc_iomux_v3_setup_multiple_pads(mx51_3ds_pads, ARRAY_SIZE(mx51_3ds_pads)); @@ -160,8 +160,8 @@ static void __init mx51_3ds_timer_init(void) mx51_clocks_init(32768, 24000000, 22579200, 0); } -static struct sys_timer mxc_timer = { - .init = mx51_3ds_timer_init, +static struct sys_timer mx51_3ds_timer = { + .init = mx51_3ds_timer_init, }; MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board") @@ -170,6 +170,6 @@ MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board") .map_io = mx51_map_io, .init_early = imx51_init_early, .init_irq = mx51_init_irq, - .timer = &mxc_timer, - .init_machine = mxc_board_init, + .timer = &mx51_3ds_timer, + .init_machine = mx51_3ds_init, MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index 7874bcd41db..b2ecd194e76 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -341,7 +341,7 @@ static const struct spi_imx_master mx51_babbage_spi_pdata __initconst = { /* * Board specific initialization. */ -static void __init mxc_board_init(void) +static void __init mx51_babbage_init(void) { iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP; iomux_v3_cfg_t power_key = _MX51_PAD_EIM_A27__GPIO2_21 | @@ -395,8 +395,8 @@ static void __init mx51_babbage_timer_init(void) mx51_clocks_init(32768, 24000000, 22579200, 0); } -static struct sys_timer mxc_timer = { - .init = mx51_babbage_timer_init, +static struct sys_timer mx51_babbage_timer = { + .init = mx51_babbage_timer_init, }; MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board") @@ -405,6 +405,6 @@ MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board") .map_io = mx51_map_io, .init_early = imx51_init_early, .init_irq = mx51_init_irq, - .timer = &mxc_timer, - .init_machine = mxc_board_init, + .timer = &mx51_babbage_timer, + .init_machine = mx51_babbage_init, MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c index b0fa55327c3..c4094fa5794 100644 --- a/arch/arm/mach-mx5/board-mx51_efikamx.c +++ b/arch/arm/mach-mx5/board-mx51_efikamx.c @@ -303,7 +303,7 @@ void mx51_efikamx_reset(void) gpio_direction_output(EFIKAMX_RESET, 0); } -static void __init mxc_board_init(void) +static void __init mx51_efikamx_init(void) { mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads, ARRAY_SIZE(mx51efikamx_pads)); @@ -341,8 +341,8 @@ static void __init mx51_efikamx_timer_init(void) mx51_clocks_init(32768, 24000000, 22579200, 24576000); } -static struct sys_timer mxc_timer = { - .init = mx51_efikamx_timer_init, +static struct sys_timer mx51_efikamx_timer = { + .init = mx51_efikamx_timer_init, }; MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop") @@ -351,6 +351,6 @@ MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop") .map_io = mx51_map_io, .init_early = imx51_init_early, .init_irq = mx51_init_irq, - .timer = &mxc_timer, - .init_machine = mxc_board_init, + .timer = &mx51_efikamx_timer, + .init_machine = mx51_efikamx_init, MACHINE_END -- cgit v1.2.3-18-g5258 From a0c859c593827c0ff488e05909e9901ecd10159f Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Fri, 11 Feb 2011 10:21:08 +0100 Subject: ARM: mx3: remove some useless comments MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/mach-mx31_3ds.c | 8 -------- arch/arm/mach-mx3/mach-mx31ads.c | 14 +------------- arch/arm/mach-mx3/mach-qong.c | 9 --------- arch/arm/mach-mx3/mm.c | 9 --------- 4 files changed, 1 insertion(+), 39 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c index 0d24b3c63c8..b7d0953046e 100644 --- a/arch/arm/mach-mx3/mach-mx31_3ds.c +++ b/arch/arm/mach-mx3/mach-mx31_3ds.c @@ -42,10 +42,6 @@ /* CPLD IRQ line for external uart, external ethernet etc */ #define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_1) -/* - * This file contains the board-specific initialization routines. - */ - static int mx31_3ds_pins[] = { /* UART1 */ MX31_PIN_CTS1__CTS1, @@ -371,10 +367,6 @@ static struct sys_timer mx31_3ds_timer = { .init = mx31_3ds_timer_init, }; -/* - * The following uses standard kernel macros defined in arch.h in order to - * initialize __mach_desc_MX31_3DS data structure. - */ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)") /* Maintainer: Freescale Semiconductor, Inc. */ .boot_params = MX3x_PHYS_OFFSET + 0x100, diff --git a/arch/arm/mach-mx3/mach-mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c index cb80b963820..14e76711162 100644 --- a/arch/arm/mach-mx3/mach-mx31ads.c +++ b/arch/arm/mach-mx3/mach-mx31ads.c @@ -69,9 +69,6 @@ #define EXPIO_INT_XUART_INTB (MXC_EXP_IO_BASE + 11) #define MXC_MAX_EXP_IO_LINES 16 -/* - * This file contains the board-specific initialization routines. - */ /* * The serial port definition structure. @@ -497,9 +494,7 @@ static void mxc_init_audio(void) mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi"); } -/*! - * This structure defines static mappings for the i.MX31ADS board. - */ +/* static mappings */ static struct map_desc mx31ads_io_desc[] __initdata = { { .virtual = MX31_CS4_BASE_ADDR_VIRT, @@ -509,9 +504,6 @@ static struct map_desc mx31ads_io_desc[] __initdata = { }, }; -/*! - * Set up static virtual mappings. - */ static void __init mx31ads_map_io(void) { mx31_map_io(); @@ -541,10 +533,6 @@ static struct sys_timer mx31ads_timer = { .init = mx31ads_timer_init, }; -/* - * The following uses standard kernel macros defined in arch.h in order to - * initialize __mach_desc_MX31ADS data structure. - */ MACHINE_START(MX31ADS, "Freescale MX31ADS") /* Maintainer: Freescale Semiconductor, Inc. */ .boot_params = MX3x_PHYS_OFFSET + 0x100, diff --git a/arch/arm/mach-mx3/mach-qong.c b/arch/arm/mach-mx3/mach-qong.c index 002816347e6..17f758b7762 100644 --- a/arch/arm/mach-mx3/mach-qong.c +++ b/arch/arm/mach-mx3/mach-qong.c @@ -54,10 +54,6 @@ #define QONG_FPGA_IRQ IOMUX_TO_IRQ(MX31_PIN_DTR_DCE1) -/* - * This file contains the board-specific initialization routines. - */ - static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -263,11 +259,6 @@ static struct sys_timer qong_timer = { .init = qong_timer_init, }; -/* - * The following uses standard kernel macros defined in arch.h in order to - * initialize __mach_desc_QONG data structure. - */ - MACHINE_START(QONG, "Dave/DENX QongEVB-LITE") /* Maintainer: DENX Software Engineering GmbH */ .boot_params = MX3x_PHYS_OFFSET + 0x100, diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c index 3387319b096..eefd4cf0a69 100644 --- a/arch/arm/mach-mx3/mm.c +++ b/arch/arm/mach-mx3/mm.c @@ -28,14 +28,6 @@ #include #include -/*! - * @file mm.c - * - * @brief This file creates static virtual to physical mappings, common to all MX3 boards. - * - * @ingroup Memory - */ - #ifdef CONFIG_SOC_IMX31 static struct map_desc mx31_io_desc[] __initdata = { imx_map_entry(MX31, X_MEMC, MT_DEVICE), @@ -135,4 +127,3 @@ static int mxc_init_l2x0(void) arch_initcall(mxc_init_l2x0); #endif - -- cgit v1.2.3-18-g5258 From 4e43d9fad1c0984e167ab14bd8148289acd61b9c Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Fri, 11 Feb 2011 10:21:09 +0100 Subject: ARM: mx3/mx31ads: fix comments of irq callbacks MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The arguments to these callbacks were changed in e981a30 (ARM: mx3: irq_data conversion.) but the comments were not adapted. Cc: Lennert Buytenhek Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/mach-mx31ads.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mx3/mach-mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c index 14e76711162..4e4b780c481 100644 --- a/arch/arm/mach-mx3/mach-mx31ads.c +++ b/arch/arm/mach-mx3/mach-mx31ads.c @@ -144,7 +144,7 @@ static void mx31ads_expio_irq_handler(u32 irq, struct irq_desc *desc) /* * Disable an expio pin's interrupt by setting the bit in the imr. - * @param irq an expio virtual irq number + * @param d an expio virtual irq description */ static void expio_mask_irq(struct irq_data *d) { @@ -156,7 +156,7 @@ static void expio_mask_irq(struct irq_data *d) /* * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr. - * @param irq an expanded io virtual irq number + * @param d an expio virtual irq description */ static void expio_ack_irq(struct irq_data *d) { @@ -167,7 +167,7 @@ static void expio_ack_irq(struct irq_data *d) /* * Enable a expio pin's interrupt by clearing the bit in the imr. - * @param irq a expio virtual irq number + * @param d an expio virtual irq description */ static void expio_unmask_irq(struct irq_data *d) { -- cgit v1.2.3-18-g5258 From 124c13b9a34267bfae9c1bb0bdf4a8a6c1cc1df1 Mon Sep 17 00:00:00 2001 From: Julien Boibessot Date: Fri, 11 Feb 2011 15:15:30 +0100 Subject: i.MX51 iomux: Fixes MX51_PAD_UART2_TXD__UART2_TXD & MX51_PAD_USBH1_DATA2__UART2_TXD declarations Fixes 2 small regressions of recent iomux changes: - current MX51_PAD_UART2_TXD__UART2_TXD declaration overwrites IOMUXC_UART2_IPP_UART_RXD_MUX_SELECT_INPUT register (0x09ec) and prevent UART2 Rx from working properly. (Tested on my custom i.MX51 board where UART2 is used as console) - current MX51_PAD_USBH1_DATA2__UART2_TXD declaration also has the same problem. (Not tested) Signed-off-by: Julien Boibessot Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/include/mach/iomux-mx51.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h index b6767f90ef1..6056cf2cd00 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx51.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h @@ -473,7 +473,7 @@ #define _MX51_PAD_UART2_RXD__UART2_RXD IOMUX_PAD(0x628, 0x238, 0, 0x09ec, 2, 0) #define _MX51_PAD_UART2_TXD__FIRI_RXD IOMUX_PAD(0x62c, 0x23c, 1, 0x0000, 0, 0) #define _MX51_PAD_UART2_TXD__GPIO1_21 IOMUX_PAD(0x62c, 0x23c, 3, 0x0000, 0, 0) -#define _MX51_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x62c, 0x23c, 0, 0x09ec, 3, 0) +#define _MX51_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x62c, 0x23c, 0, 0x0000, 0, 0) #define _MX51_PAD_UART3_RXD__CSI1_D0 IOMUX_PAD(0x630, 0x240, 2, 0x0000, 0, 0) #define _MX51_PAD_UART3_RXD__GPIO1_22 IOMUX_PAD(0x630, 0x240, 3, 0x0000, 0, 0) #define _MX51_PAD_UART3_RXD__UART1_DTR IOMUX_PAD(0x630, 0x240, 0, 0x0000, 0, 0) @@ -528,7 +528,7 @@ #define _MX51_PAD_USBH1_DATA1__UART2_RXD IOMUX_PAD(0x68c, 0x28c, 1, 0x09ec, 4, 0) #define _MX51_PAD_USBH1_DATA1__USBH1_DATA1 IOMUX_PAD(0x68c, 0x28c, 0, 0x0000, 0, 0) #define _MX51_PAD_USBH1_DATA2__GPIO1_13 IOMUX_PAD(0x690, 0x290, 2, 0x0000, 0, 0) -#define _MX51_PAD_USBH1_DATA2__UART2_TXD IOMUX_PAD(0x690, 0x290, 1, 0x09ec, 5, 0) +#define _MX51_PAD_USBH1_DATA2__UART2_TXD IOMUX_PAD(0x690, 0x290, 1, 0x0000, 0, 0) #define _MX51_PAD_USBH1_DATA2__USBH1_DATA2 IOMUX_PAD(0x690, 0x290, 0, 0x0000, 0, 0) #define _MX51_PAD_USBH1_DATA3__GPIO1_14 IOMUX_PAD(0x694, 0x294, 2, 0x0000, 0, 0) #define _MX51_PAD_USBH1_DATA3__UART2_RTS IOMUX_PAD(0x694, 0x294, 1, 0x09e8, 5, 0) -- cgit v1.2.3-18-g5258 From 6b08cfebd3bd346d8a2fd68a2265fc7736849802 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Fri, 11 Feb 2011 15:23:58 +0000 Subject: xen p2m: annotate variable which appears unused CC arch/x86/xen/p2m.o arch/x86/xen/p2m.c: In function 'm2p_remove_override': arch/x86/xen/p2m.c:460: warning: 'address' may be used uninitialized in this function arch/x86/xen/p2m.c: In function 'm2p_add_override': arch/x86/xen/p2m.c:426: warning: 'address' may be used uninitialized in this function In actual fact address is inialised in one "if (!PageHighMem(page))" statement and used in a second and so is always initialised before use. Signed-off-by: Ian Campbell Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/p2m.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c index fd12d7ce7ff..89342e5fd08 100644 --- a/arch/x86/xen/p2m.c +++ b/arch/x86/xen/p2m.c @@ -421,7 +421,7 @@ int m2p_add_override(unsigned long mfn, struct page *page) { unsigned long flags; unsigned long pfn; - unsigned long address; + unsigned long uninitialized_var(address); unsigned level; pte_t *ptep = NULL; @@ -455,7 +455,7 @@ int m2p_remove_override(struct page *page) unsigned long flags; unsigned long mfn; unsigned long pfn; - unsigned long address; + unsigned long uninitialized_var(address); unsigned level; pte_t *ptep = NULL; -- cgit v1.2.3-18-g5258 From 44b46c3ef805793ab3a7730dc71c72d0f258ea8e Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Fri, 11 Feb 2011 16:37:41 +0000 Subject: xen: annotate functions which only call into __init at start of day Both xen_hvm_init_shared_info and xen_build_mfn_list_list can be called at resume time as well as at start of day but only reference __init functions (extend_brk) at start of day. Hence annotate with __ref. WARNING: arch/x86/built-in.o(.text+0x4f1): Section mismatch in reference from the function xen_hvm_init_shared_info() to the function .init.text:extend_brk() The function xen_hvm_init_shared_info() references the function __init extend_brk(). This is often because xen_hvm_init_shared_info lacks a __init annotation or the annotation of extend_brk is wrong. xen_hvm_init_shared_info calls extend_brk() iff !shared_info_page and initialises shared_info_page with the result. This happens at start of day only. WARNING: arch/x86/built-in.o(.text+0x599b): Section mismatch in reference from the function xen_build_mfn_list_list() to the function .init.text:extend_brk() The function xen_build_mfn_list_list() references the function __init extend_brk(). This is often because xen_build_mfn_list_list lacks a __init annotation or the annotation of extend_brk is wrong. (this warning occurs multiple times) xen_build_mfn_list_list only calls extend_brk() at boot time, while building the initial mfn list list Signed-off-by: Ian Campbell Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/enlighten.c | 2 +- arch/x86/xen/p2m.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 50542efe45f..28e6d42ce2b 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1292,7 +1292,7 @@ static int init_hvm_pv_info(int *major, int *minor) return 0; } -void xen_hvm_init_shared_info(void) +void __ref xen_hvm_init_shared_info(void) { int cpu; struct xen_add_to_physmap xatp; diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c index 89342e5fd08..05cfc6abbe1 100644 --- a/arch/x86/xen/p2m.c +++ b/arch/x86/xen/p2m.c @@ -136,7 +136,7 @@ static void p2m_init(unsigned long *p2m) * - After resume we're called from within stop_machine, but the mfn * tree should alreay be completely allocated. */ -void xen_build_mfn_list_list(void) +void __ref xen_build_mfn_list_list(void) { unsigned long pfn; -- cgit v1.2.3-18-g5258 From 9bc433a1db702138371c565526232e9159f14497 Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Fri, 11 Feb 2011 16:41:20 +0100 Subject: ARM: 6659/1: Thumb-2: Make CONFIG_OABI_COMPAT depend on !CONFIG_THUMB2_KERNEL rmk says: "You might as well make OABI_COMPAT depend on !THUMB2_KERNEL. OABI userland is useless without FPA support." nwfpe doesn't work with Thumb-2 anyway and will probably never get ported, so I can't argue with that. This patch implements the dependency change. Signed-off-by: Dave Martin Acked-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5cff165b7eb..26d45e5b636 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1391,7 +1391,7 @@ config AEABI config OABI_COMPAT bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)" - depends on AEABI && EXPERIMENTAL + depends on AEABI && EXPERIMENTAL && !THUMB2_KERNEL default y help This option preserves the old syscall interface along with the -- cgit v1.2.3-18-g5258 From 34cd2d38db423a991a36d14e9f79e98993addd07 Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Fri, 11 Feb 2011 16:26:10 +0100 Subject: ARM: 6658/1: collie: do actually pass locomo_info to locomo driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit locomo_info isn't actually used as a platform_data on collie platform: arm/mach-sa1100/collie.c:237: warning: ‘locomo_info’ defined but not used So locomo driver doesn't setup IRQs correctly. Pass locomo_info to the driver. Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Russell King --- arch/arm/mach-sa1100/collie.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index d43c5ef58eb..bd3e1bfdd6a 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -241,6 +241,9 @@ static struct locomo_platform_data locomo_info = { struct platform_device collie_locomo_device = { .name = "locomo", .id = 0, + .dev = { + .platform_data = &locomo_info, + }, .num_resources = ARRAY_SIZE(locomo_resources), .resource = locomo_resources, }; -- cgit v1.2.3-18-g5258 From ed19b739c5c76ad241d30f6c6a5ee96fb284f4cf Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 11 Feb 2011 15:55:12 +0100 Subject: ARM: 6656/1: hw_breakpoint: avoid UNPREDICTABLE behaviour when reading DBGDSCR Reading baseline CP14 registers, other than DBGDIDR, when the OS Lock is set leads to UNPREDICTABLE behaviour. This patch ensures that we clear the OS lock before accessing anything other than the DBGDIDR, thereby avoiding this behaviour. Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/hw_breakpoint.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index c9f3f046757..ab02d8aadb7 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -834,11 +834,11 @@ static void reset_ctrl_regs(void *unused) /* * v7 debug contains save and restore registers so that debug state - * can be maintained across low-power modes without leaving - * the debug logic powered up. It is IMPLEMENTATION DEFINED whether - * we can write to the debug registers out of reset, so we must - * unlock the OS Lock Access Register to avoid taking undefined - * instruction exceptions later on. + * can be maintained across low-power modes without leaving the debug + * logic powered up. It is IMPLEMENTATION DEFINED whether we can access + * the debug registers out of reset, so we must unlock the OS Lock + * Access Register to avoid taking undefined instruction exceptions + * later on. */ if (debug_arch >= ARM_DEBUG_ARCH_V7_ECP14) { /* @@ -899,18 +899,18 @@ static int __init arch_hw_breakpoint_init(void) pr_info("%d breakpoint(s) reserved for watchpoint " "single-step.\n", core_num_reserved_brps); + /* + * Reset the breakpoint resources. We assume that a halting + * debugger will leave the world in a nice state for us. + */ + on_each_cpu(reset_ctrl_regs, NULL, 1); + ARM_DBG_READ(c1, 0, dscr); if (dscr & ARM_DSCR_HDBGEN) { + max_watchpoint_len = 4; pr_warning("halting debug mode enabled. Assuming maximum " - "watchpoint size of 4 bytes."); + "watchpoint size of %u bytes.", max_watchpoint_len); } else { - /* - * Reset the breakpoint resources. We assume that a halting - * debugger will leave the world in a nice state for us. - */ - smp_call_function(reset_ctrl_regs, NULL, 1); - reset_ctrl_regs(NULL); - /* Work out the maximum supported watchpoint length. */ max_watchpoint_len = get_max_wp_len(); pr_info("maximum watchpoint size is %u bytes.\n", -- cgit v1.2.3-18-g5258 From 66e1cfe6d52c69d317e9df76ebc8538a34af0d51 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 11 Feb 2011 16:01:42 +0100 Subject: ARM: 6657/1: hw_breakpoint: fix ptrace breakpoint advertising on unsupported arch The ptrace debug information register was advertising breakpoint and watchpoint resources for unsupported debug architectures. This meant that setting breakpoints on these architectures would appear to succeed, although they would never fire in reality. This patch fixes the breakpoint slot probing so that it returns 0 when running on an unsupported debug architecture. Reported-by: Ulrich Weigand Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/hw_breakpoint.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index ab02d8aadb7..d600bd35070 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -137,11 +137,10 @@ static u8 get_debug_arch(void) u32 didr; /* Do we implement the extended CPUID interface? */ - if (((read_cpuid_id() >> 16) & 0xf) != 0xf) { - pr_warning("CPUID feature registers not supported. " - "Assuming v6 debug is present.\n"); + if (WARN_ONCE((((read_cpuid_id() >> 16) & 0xf) != 0xf), + "CPUID feature registers not supported. " + "Assuming v6 debug is present.\n")) return ARM_DEBUG_ARCH_V6; - } ARM_DBG_READ(c0, 0, didr); return (didr >> 16) & 0xf; @@ -152,6 +151,12 @@ u8 arch_get_debug_arch(void) return debug_arch; } +static int debug_arch_supported(void) +{ + u8 arch = get_debug_arch(); + return arch >= ARM_DEBUG_ARCH_V6 && arch <= ARM_DEBUG_ARCH_V7_ECP14; +} + /* Determine number of BRP register available. */ static int get_num_brp_resources(void) { @@ -268,6 +273,9 @@ out: int hw_breakpoint_slots(int type) { + if (!debug_arch_supported()) + return 0; + /* * We can be called early, so don't rely on * our static variables being initialised. @@ -882,7 +890,7 @@ static int __init arch_hw_breakpoint_init(void) debug_arch = get_debug_arch(); - if (debug_arch > ARM_DEBUG_ARCH_V7_ECP14) { + if (!debug_arch_supported()) { pr_info("debug architecture 0x%x unsupported.\n", debug_arch); return 0; } -- cgit v1.2.3-18-g5258 From d91309f69b7bdb64aeb30106fde8d18c5dd354b5 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 11 Feb 2011 22:07:46 +0100 Subject: x86: Fix text_poke_smp_batch() deadlock Fix this deadlock - we are already holding the mutex: ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.38-rc4-test+ #1 ------------------------------------------------------- bash/1850 is trying to acquire lock: (text_mutex){+.+.+.}, at: [] return_to_handler+0x0/0x2f but task is already holding lock: (smp_alt){+.+...}, at: [] return_to_handler+0x0/0x2f which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (smp_alt){+.+...}: [] lock_acquire+0xcd/0xf8 [] __mutex_lock_common+0x4c/0x339 [] mutex_lock_nested+0x3e/0x43 [] alternatives_smp_switch+0x77/0x1d8 [] do_boot_cpu+0xd7/0x762 [] native_cpu_up+0xe6/0x16a [] _cpu_up+0x9d/0xee [] cpu_up+0xd3/0xe7 [] kernel_init+0xe8/0x20a [] kernel_thread_helper+0x4/0x10 -> #1 (cpu_hotplug.lock){+.+.+.}: [] lock_acquire+0xcd/0xf8 [] __mutex_lock_common+0x4c/0x339 [] mutex_lock_nested+0x3e/0x43 [] get_online_cpus+0x41/0x55 [] stop_machine+0x1e/0x3e [] text_poke_smp_batch+0x3a/0x3c [] arch_optimize_kprobes+0x10d/0x11c [] kprobe_optimizer+0x152/0x222 [] process_one_work+0x1d3/0x335 [] worker_thread+0x104/0x1a4 [] kthread+0x9d/0xa5 [] kernel_thread_helper+0x4/0x10 -> #0 (text_mutex){+.+.+.}: other info that might help us debug this: 6 locks held by bash/1850: #0: (&buffer->mutex){+.+.+.}, at: [] return_to_handler+0x0/0x2f #1: (s_active#75){.+.+.+}, at: [] return_to_handler+0x0/0x2f #2: (x86_cpu_hotplug_driver_mutex){+.+.+.}, at: [] return_to_handler+0x0/0x2f #3: (cpu_add_remove_lock){+.+.+.}, at: [] return_to_handler+0x0/0x2f #4: (cpu_hotplug.lock){+.+.+.}, at: [] return_to_handler+0x0/0x2f #5: (smp_alt){+.+...}, at: [] return_to_handler+0x0/0x2f stack backtrace: Pid: 1850, comm: bash Not tainted 2.6.38-rc4-test+ #1 Call Trace: [] print_circular_bug+0xa8/0xb7 [] mutex_lock_nested+0x3e/0x43 [] alternatives_smp_unlock+0x3d/0x93 [] alternatives_smp_switch+0x198/0x1d8 [] native_cpu_die+0x65/0x95 [] _cpu_down+0x13e/0x202 [] sysfs_write_file+0x108/0x144 [] vfs_write+0xac/0xff [] sys_write+0x4a/0x6e Reported-by: Steven Rostedt Tested-by: Steven Rostedt Signed-off-by: Peter Zijlstra Cc: mathieu.desnoyers@efficios.com Cc: rusty@rustcorp.com.au Cc: ananth@in.ibm.com Cc: masami.hiramatsu.pt@hitachi.com Cc: fweisbec@gmail.com Cc: jbeulich@novell.com Cc: jbaron@redhat.com Cc: mhiramat@redhat.com LKML-Reference: <1297458466.5226.93.camel@laptop> Signed-off-by: Ingo Molnar --- arch/x86/kernel/alternative.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c index 123608531c8..7038b95d363 100644 --- a/arch/x86/kernel/alternative.c +++ b/arch/x86/kernel/alternative.c @@ -671,7 +671,7 @@ void __kprobes text_poke_smp_batch(struct text_poke_param *params, int n) atomic_set(&stop_machine_first, 1); wrote_text = 0; - stop_machine(stop_machine_text_poke, (void *)&tpp, NULL); + __stop_machine(stop_machine_text_poke, (void *)&tpp, NULL); } #if defined(CONFIG_DYNAMIC_FTRACE) || defined(HAVE_JUMP_LABEL) -- cgit v1.2.3-18-g5258 From 5117348dea5e3ecbb785cfa1271386fb49332b41 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 12 Feb 2011 11:51:03 +0100 Subject: x86: Readd missing irq_to_desc() in fixup_irq() commit a3c08e5d(x86: Convert irq_chip access to new functions) accidentally zapped desc = irq_to_desc(irq); in the vector loop. So we lock some random irq descriptor. Add it back. Signed-off-by: Thomas Gleixner Cc: # .37 --- arch/x86/kernel/irq.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c index 52945da52a9..387b6a0c9e8 100644 --- a/arch/x86/kernel/irq.c +++ b/arch/x86/kernel/irq.c @@ -367,7 +367,8 @@ void fixup_irqs(void) if (irr & (1 << (vector % 32))) { irq = __this_cpu_read(vector_irq[vector]); - data = irq_get_irq_data(irq); + desc = irq_to_desc(irq); + data = &desc->irq_data; raw_spin_lock(&desc->lock); if (data->chip->irq_retrigger) data->chip->irq_retrigger(data); -- cgit v1.2.3-18-g5258 From 753790e713d80b50b867fa1ed32ec0eb5e82ae8e Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 6 Feb 2011 15:32:24 +0000 Subject: ARM: move cache/processor/fault glue to separate include files This allows the cache/processor/fault glue to be more easily used from assembler code. Tested on Assabet and Tegra 2. Tested-by: Colin Cross Signed-off-by: Russell King --- arch/arm/include/asm/cacheflush.h | 133 +---------------- arch/arm/include/asm/cpu-multi32.h | 69 --------- arch/arm/include/asm/cpu-single.h | 44 ------ arch/arm/include/asm/glue-cache.h | 146 ++++++++++++++++++ arch/arm/include/asm/glue-df.h | 110 ++++++++++++++ arch/arm/include/asm/glue-pf.h | 57 +++++++ arch/arm/include/asm/glue-proc.h | 261 ++++++++++++++++++++++++++++++++ arch/arm/include/asm/glue.h | 138 ----------------- arch/arm/include/asm/proc-fns.h | 299 ++++++++----------------------------- arch/arm/kernel/asm-offsets.c | 2 + arch/arm/kernel/entry-armv.S | 3 +- 11 files changed, 644 insertions(+), 618 deletions(-) delete mode 100644 arch/arm/include/asm/cpu-multi32.h delete mode 100644 arch/arm/include/asm/cpu-single.h create mode 100644 arch/arm/include/asm/glue-cache.h create mode 100644 arch/arm/include/asm/glue-df.h create mode 100644 arch/arm/include/asm/glue-pf.h create mode 100644 arch/arm/include/asm/glue-proc.h (limited to 'arch') diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index 3acd8fa25e3..18a56640d97 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -12,130 +12,13 @@ #include -#include +#include #include #include #include #define CACHE_COLOUR(vaddr) ((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT) -/* - * Cache Model - * =========== - */ -#undef _CACHE -#undef MULTI_CACHE - -#if defined(CONFIG_CPU_CACHE_V3) -# ifdef _CACHE -# define MULTI_CACHE 1 -# else -# define _CACHE v3 -# endif -#endif - -#if defined(CONFIG_CPU_CACHE_V4) -# ifdef _CACHE -# define MULTI_CACHE 1 -# else -# define _CACHE v4 -# endif -#endif - -#if defined(CONFIG_CPU_ARM920T) || defined(CONFIG_CPU_ARM922T) || \ - defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020) || \ - defined(CONFIG_CPU_ARM1026) -# define MULTI_CACHE 1 -#endif - -#if defined(CONFIG_CPU_FA526) -# ifdef _CACHE -# define MULTI_CACHE 1 -# else -# define _CACHE fa -# endif -#endif - -#if defined(CONFIG_CPU_ARM926T) -# ifdef _CACHE -# define MULTI_CACHE 1 -# else -# define _CACHE arm926 -# endif -#endif - -#if defined(CONFIG_CPU_ARM940T) -# ifdef _CACHE -# define MULTI_CACHE 1 -# else -# define _CACHE arm940 -# endif -#endif - -#if defined(CONFIG_CPU_ARM946E) -# ifdef _CACHE -# define MULTI_CACHE 1 -# else -# define _CACHE arm946 -# endif -#endif - -#if defined(CONFIG_CPU_CACHE_V4WB) -# ifdef _CACHE -# define MULTI_CACHE 1 -# else -# define _CACHE v4wb -# endif -#endif - -#if defined(CONFIG_CPU_XSCALE) -# ifdef _CACHE -# define MULTI_CACHE 1 -# else -# define _CACHE xscale -# endif -#endif - -#if defined(CONFIG_CPU_XSC3) -# ifdef _CACHE -# define MULTI_CACHE 1 -# else -# define _CACHE xsc3 -# endif -#endif - -#if defined(CONFIG_CPU_MOHAWK) -# ifdef _CACHE -# define MULTI_CACHE 1 -# else -# define _CACHE mohawk -# endif -#endif - -#if defined(CONFIG_CPU_FEROCEON) -# define MULTI_CACHE 1 -#endif - -#if defined(CONFIG_CPU_V6) -//# ifdef _CACHE -# define MULTI_CACHE 1 -//# else -//# define _CACHE v6 -//# endif -#endif - -#if defined(CONFIG_CPU_V7) -//# ifdef _CACHE -# define MULTI_CACHE 1 -//# else -//# define _CACHE v7 -//# endif -#endif - -#if !defined(_CACHE) && !defined(MULTI_CACHE) -#error Unknown cache maintainence model -#endif - /* * This flag is used to indicate that the page pointed to by a pte is clean * and does not require cleaning before returning it to the user. @@ -249,19 +132,11 @@ extern struct cpu_cache_fns cpu_cache; * visible to the CPU. */ #define dmac_map_area cpu_cache.dma_map_area -#define dmac_unmap_area cpu_cache.dma_unmap_area +#define dmac_unmap_area cpu_cache.dma_unmap_area #define dmac_flush_range cpu_cache.dma_flush_range #else -#define __cpuc_flush_icache_all __glue(_CACHE,_flush_icache_all) -#define __cpuc_flush_kern_all __glue(_CACHE,_flush_kern_cache_all) -#define __cpuc_flush_user_all __glue(_CACHE,_flush_user_cache_all) -#define __cpuc_flush_user_range __glue(_CACHE,_flush_user_cache_range) -#define __cpuc_coherent_kern_range __glue(_CACHE,_coherent_kern_range) -#define __cpuc_coherent_user_range __glue(_CACHE,_coherent_user_range) -#define __cpuc_flush_dcache_area __glue(_CACHE,_flush_kern_dcache_area) - extern void __cpuc_flush_icache_all(void); extern void __cpuc_flush_kern_all(void); extern void __cpuc_flush_user_all(void); @@ -276,10 +151,6 @@ extern void __cpuc_flush_dcache_area(void *, size_t); * is visible to DMA, or data written by DMA to system memory is * visible to the CPU. */ -#define dmac_map_area __glue(_CACHE,_dma_map_area) -#define dmac_unmap_area __glue(_CACHE,_dma_unmap_area) -#define dmac_flush_range __glue(_CACHE,_dma_flush_range) - extern void dmac_map_area(const void *, size_t, int); extern void dmac_unmap_area(const void *, size_t, int); extern void dmac_flush_range(const void *, const void *); diff --git a/arch/arm/include/asm/cpu-multi32.h b/arch/arm/include/asm/cpu-multi32.h deleted file mode 100644 index e2b5b0b2116..00000000000 --- a/arch/arm/include/asm/cpu-multi32.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - * arch/arm/include/asm/cpu-multi32.h - * - * Copyright (C) 2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include - -struct mm_struct; - -/* - * Don't change this structure - ASM code - * relies on it. - */ -extern struct processor { - /* MISC - * get data abort address/flags - */ - void (*_data_abort)(unsigned long pc); - /* - * Retrieve prefetch fault address - */ - unsigned long (*_prefetch_abort)(unsigned long lr); - /* - * Set up any processor specifics - */ - void (*_proc_init)(void); - /* - * Disable any processor specifics - */ - void (*_proc_fin)(void); - /* - * Special stuff for a reset - */ - void (*reset)(unsigned long addr) __attribute__((noreturn)); - /* - * Idle the processor - */ - int (*_do_idle)(void); - /* - * Processor architecture specific - */ - /* - * clean a virtual address range from the - * D-cache without flushing the cache. - */ - void (*dcache_clean_area)(void *addr, int size); - - /* - * Set the page table - */ - void (*switch_mm)(unsigned long pgd_phys, struct mm_struct *mm); - /* - * Set a possibly extended PTE. Non-extended PTEs should - * ignore 'ext'. - */ - void (*set_pte_ext)(pte_t *ptep, pte_t pte, unsigned int ext); -} processor; - -#define cpu_proc_init() processor._proc_init() -#define cpu_proc_fin() processor._proc_fin() -#define cpu_reset(addr) processor.reset(addr) -#define cpu_do_idle() processor._do_idle() -#define cpu_dcache_clean_area(addr,sz) processor.dcache_clean_area(addr,sz) -#define cpu_set_pte_ext(ptep,pte,ext) processor.set_pte_ext(ptep,pte,ext) -#define cpu_do_switch_mm(pgd,mm) processor.switch_mm(pgd,mm) diff --git a/arch/arm/include/asm/cpu-single.h b/arch/arm/include/asm/cpu-single.h deleted file mode 100644 index f073a6d2a40..00000000000 --- a/arch/arm/include/asm/cpu-single.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * arch/arm/include/asm/cpu-single.h - * - * Copyright (C) 2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -/* - * Single CPU - */ -#ifdef __STDC__ -#define __catify_fn(name,x) name##x -#else -#define __catify_fn(name,x) name/**/x -#endif -#define __cpu_fn(name,x) __catify_fn(name,x) - -/* - * If we are supporting multiple CPUs, then we must use a table of - * function pointers for this lot. Otherwise, we can optimise the - * table away. - */ -#define cpu_proc_init __cpu_fn(CPU_NAME,_proc_init) -#define cpu_proc_fin __cpu_fn(CPU_NAME,_proc_fin) -#define cpu_reset __cpu_fn(CPU_NAME,_reset) -#define cpu_do_idle __cpu_fn(CPU_NAME,_do_idle) -#define cpu_dcache_clean_area __cpu_fn(CPU_NAME,_dcache_clean_area) -#define cpu_do_switch_mm __cpu_fn(CPU_NAME,_switch_mm) -#define cpu_set_pte_ext __cpu_fn(CPU_NAME,_set_pte_ext) - -#include - -struct mm_struct; - -/* declare all the functions as extern */ -extern void cpu_proc_init(void); -extern void cpu_proc_fin(void); -extern int cpu_do_idle(void); -extern void cpu_dcache_clean_area(void *, int); -extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm); -extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext); -extern void cpu_reset(unsigned long addr) __attribute__((noreturn)); diff --git a/arch/arm/include/asm/glue-cache.h b/arch/arm/include/asm/glue-cache.h new file mode 100644 index 00000000000..0591d35001e --- /dev/null +++ b/arch/arm/include/asm/glue-cache.h @@ -0,0 +1,146 @@ +/* + * arch/arm/include/asm/glue-cache.h + * + * Copyright (C) 1999-2002 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef ASM_GLUE_CACHE_H +#define ASM_GLUE_CACHE_H + +#include + +/* + * Cache Model + * =========== + */ +#undef _CACHE +#undef MULTI_CACHE + +#if defined(CONFIG_CPU_CACHE_V3) +# ifdef _CACHE +# define MULTI_CACHE 1 +# else +# define _CACHE v3 +# endif +#endif + +#if defined(CONFIG_CPU_CACHE_V4) +# ifdef _CACHE +# define MULTI_CACHE 1 +# else +# define _CACHE v4 +# endif +#endif + +#if defined(CONFIG_CPU_ARM920T) || defined(CONFIG_CPU_ARM922T) || \ + defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020) || \ + defined(CONFIG_CPU_ARM1026) +# define MULTI_CACHE 1 +#endif + +#if defined(CONFIG_CPU_FA526) +# ifdef _CACHE +# define MULTI_CACHE 1 +# else +# define _CACHE fa +# endif +#endif + +#if defined(CONFIG_CPU_ARM926T) +# ifdef _CACHE +# define MULTI_CACHE 1 +# else +# define _CACHE arm926 +# endif +#endif + +#if defined(CONFIG_CPU_ARM940T) +# ifdef _CACHE +# define MULTI_CACHE 1 +# else +# define _CACHE arm940 +# endif +#endif + +#if defined(CONFIG_CPU_ARM946E) +# ifdef _CACHE +# define MULTI_CACHE 1 +# else +# define _CACHE arm946 +# endif +#endif + +#if defined(CONFIG_CPU_CACHE_V4WB) +# ifdef _CACHE +# define MULTI_CACHE 1 +# else +# define _CACHE v4wb +# endif +#endif + +#if defined(CONFIG_CPU_XSCALE) +# ifdef _CACHE +# define MULTI_CACHE 1 +# else +# define _CACHE xscale +# endif +#endif + +#if defined(CONFIG_CPU_XSC3) +# ifdef _CACHE +# define MULTI_CACHE 1 +# else +# define _CACHE xsc3 +# endif +#endif + +#if defined(CONFIG_CPU_MOHAWK) +# ifdef _CACHE +# define MULTI_CACHE 1 +# else +# define _CACHE mohawk +# endif +#endif + +#if defined(CONFIG_CPU_FEROCEON) +# define MULTI_CACHE 1 +#endif + +#if defined(CONFIG_CPU_V6) +//# ifdef _CACHE +# define MULTI_CACHE 1 +//# else +//# define _CACHE v6 +//# endif +#endif + +#if defined(CONFIG_CPU_V7) +//# ifdef _CACHE +# define MULTI_CACHE 1 +//# else +//# define _CACHE v7 +//# endif +#endif + +#if !defined(_CACHE) && !defined(MULTI_CACHE) +#error Unknown cache maintainence model +#endif + +#ifndef MULTI_CACHE +#define __cpuc_flush_icache_all __glue(_CACHE,_flush_icache_all) +#define __cpuc_flush_kern_all __glue(_CACHE,_flush_kern_cache_all) +#define __cpuc_flush_user_all __glue(_CACHE,_flush_user_cache_all) +#define __cpuc_flush_user_range __glue(_CACHE,_flush_user_cache_range) +#define __cpuc_coherent_kern_range __glue(_CACHE,_coherent_kern_range) +#define __cpuc_coherent_user_range __glue(_CACHE,_coherent_user_range) +#define __cpuc_flush_dcache_area __glue(_CACHE,_flush_kern_dcache_area) + +#define dmac_map_area __glue(_CACHE,_dma_map_area) +#define dmac_unmap_area __glue(_CACHE,_dma_unmap_area) +#define dmac_flush_range __glue(_CACHE,_dma_flush_range) +#endif + +#endif diff --git a/arch/arm/include/asm/glue-df.h b/arch/arm/include/asm/glue-df.h new file mode 100644 index 00000000000..354d571e8bc --- /dev/null +++ b/arch/arm/include/asm/glue-df.h @@ -0,0 +1,110 @@ +/* + * arch/arm/include/asm/glue-df.h + * + * Copyright (C) 1997-1999 Russell King + * Copyright (C) 2000-2002 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef ASM_GLUE_DF_H +#define ASM_GLUE_DF_H + +#include + +/* + * Data Abort Model + * ================ + * + * We have the following to choose from: + * arm6 - ARM6 style + * arm7 - ARM7 style + * v4_early - ARMv4 without Thumb early abort handler + * v4t_late - ARMv4 with Thumb late abort handler + * v4t_early - ARMv4 with Thumb early abort handler + * v5tej_early - ARMv5 with Thumb and Java early abort handler + * xscale - ARMv5 with Thumb with Xscale extensions + * v6_early - ARMv6 generic early abort handler + * v7_early - ARMv7 generic early abort handler + */ +#undef CPU_DABORT_HANDLER +#undef MULTI_DABORT + +#if defined(CONFIG_CPU_ARM610) +# ifdef CPU_DABORT_HANDLER +# define MULTI_DABORT 1 +# else +# define CPU_DABORT_HANDLER cpu_arm6_data_abort +# endif +#endif + +#if defined(CONFIG_CPU_ARM710) +# ifdef CPU_DABORT_HANDLER +# define MULTI_DABORT 1 +# else +# define CPU_DABORT_HANDLER cpu_arm7_data_abort +# endif +#endif + +#ifdef CONFIG_CPU_ABRT_LV4T +# ifdef CPU_DABORT_HANDLER +# define MULTI_DABORT 1 +# else +# define CPU_DABORT_HANDLER v4t_late_abort +# endif +#endif + +#ifdef CONFIG_CPU_ABRT_EV4 +# ifdef CPU_DABORT_HANDLER +# define MULTI_DABORT 1 +# else +# define CPU_DABORT_HANDLER v4_early_abort +# endif +#endif + +#ifdef CONFIG_CPU_ABRT_EV4T +# ifdef CPU_DABORT_HANDLER +# define MULTI_DABORT 1 +# else +# define CPU_DABORT_HANDLER v4t_early_abort +# endif +#endif + +#ifdef CONFIG_CPU_ABRT_EV5TJ +# ifdef CPU_DABORT_HANDLER +# define MULTI_DABORT 1 +# else +# define CPU_DABORT_HANDLER v5tj_early_abort +# endif +#endif + +#ifdef CONFIG_CPU_ABRT_EV5T +# ifdef CPU_DABORT_HANDLER +# define MULTI_DABORT 1 +# else +# define CPU_DABORT_HANDLER v5t_early_abort +# endif +#endif + +#ifdef CONFIG_CPU_ABRT_EV6 +# ifdef CPU_DABORT_HANDLER +# define MULTI_DABORT 1 +# else +# define CPU_DABORT_HANDLER v6_early_abort +# endif +#endif + +#ifdef CONFIG_CPU_ABRT_EV7 +# ifdef CPU_DABORT_HANDLER +# define MULTI_DABORT 1 +# else +# define CPU_DABORT_HANDLER v7_early_abort +# endif +#endif + +#ifndef CPU_DABORT_HANDLER +#error Unknown data abort handler type +#endif + +#endif diff --git a/arch/arm/include/asm/glue-pf.h b/arch/arm/include/asm/glue-pf.h new file mode 100644 index 00000000000..d385f37c13f --- /dev/null +++ b/arch/arm/include/asm/glue-pf.h @@ -0,0 +1,57 @@ +/* + * arch/arm/include/asm/glue-pf.h + * + * Copyright (C) 1997-1999 Russell King + * Copyright (C) 2000-2002 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef ASM_GLUE_PF_H +#define ASM_GLUE_PF_H + +#include + +/* + * Prefetch Abort Model + * ================ + * + * We have the following to choose from: + * legacy - no IFSR, no IFAR + * v6 - ARMv6: IFSR, no IFAR + * v7 - ARMv7: IFSR and IFAR + */ + +#undef CPU_PABORT_HANDLER +#undef MULTI_PABORT + +#ifdef CONFIG_CPU_PABRT_LEGACY +# ifdef CPU_PABORT_HANDLER +# define MULTI_PABORT 1 +# else +# define CPU_PABORT_HANDLER legacy_pabort +# endif +#endif + +#ifdef CONFIG_CPU_PABRT_V6 +# ifdef CPU_PABORT_HANDLER +# define MULTI_PABORT 1 +# else +# define CPU_PABORT_HANDLER v6_pabort +# endif +#endif + +#ifdef CONFIG_CPU_PABRT_V7 +# ifdef CPU_PABORT_HANDLER +# define MULTI_PABORT 1 +# else +# define CPU_PABORT_HANDLER v7_pabort +# endif +#endif + +#ifndef CPU_PABORT_HANDLER +#error Unknown prefetch abort handler type +#endif + +#endif diff --git a/arch/arm/include/asm/glue-proc.h b/arch/arm/include/asm/glue-proc.h new file mode 100644 index 00000000000..e3bf443f2d1 --- /dev/null +++ b/arch/arm/include/asm/glue-proc.h @@ -0,0 +1,261 @@ +/* + * arch/arm/include/asm/glue-proc.h + * + * Copyright (C) 1997-1999 Russell King + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef ASM_GLUE_PROC_H +#define ASM_GLUE_PROC_H + +#include + +/* + * Work out if we need multiple CPU support + */ +#undef MULTI_CPU +#undef CPU_NAME + +/* + * CPU_NAME - the prefix for CPU related functions + */ + +#ifdef CONFIG_CPU_ARM610 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm6 +# endif +#endif + +#ifdef CONFIG_CPU_ARM7TDMI +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm7tdmi +# endif +#endif + +#ifdef CONFIG_CPU_ARM710 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm7 +# endif +#endif + +#ifdef CONFIG_CPU_ARM720T +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm720 +# endif +#endif + +#ifdef CONFIG_CPU_ARM740T +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm740 +# endif +#endif + +#ifdef CONFIG_CPU_ARM9TDMI +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm9tdmi +# endif +#endif + +#ifdef CONFIG_CPU_ARM920T +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm920 +# endif +#endif + +#ifdef CONFIG_CPU_ARM922T +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm922 +# endif +#endif + +#ifdef CONFIG_CPU_FA526 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_fa526 +# endif +#endif + +#ifdef CONFIG_CPU_ARM925T +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm925 +# endif +#endif + +#ifdef CONFIG_CPU_ARM926T +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm926 +# endif +#endif + +#ifdef CONFIG_CPU_ARM940T +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm940 +# endif +#endif + +#ifdef CONFIG_CPU_ARM946E +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm946 +# endif +#endif + +#ifdef CONFIG_CPU_SA110 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_sa110 +# endif +#endif + +#ifdef CONFIG_CPU_SA1100 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_sa1100 +# endif +#endif + +#ifdef CONFIG_CPU_ARM1020 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm1020 +# endif +#endif + +#ifdef CONFIG_CPU_ARM1020E +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm1020e +# endif +#endif + +#ifdef CONFIG_CPU_ARM1022 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm1022 +# endif +#endif + +#ifdef CONFIG_CPU_ARM1026 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_arm1026 +# endif +#endif + +#ifdef CONFIG_CPU_XSCALE +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_xscale +# endif +#endif + +#ifdef CONFIG_CPU_XSC3 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_xsc3 +# endif +#endif + +#ifdef CONFIG_CPU_MOHAWK +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_mohawk +# endif +#endif + +#ifdef CONFIG_CPU_FEROCEON +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_feroceon +# endif +#endif + +#ifdef CONFIG_CPU_V6 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_v6 +# endif +#endif + +#ifdef CONFIG_CPU_V7 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_v7 +# endif +#endif + +#ifndef MULTI_CPU +#define cpu_proc_init __glue(CPU_NAME,_proc_init) +#define cpu_proc_fin __glue(CPU_NAME,_proc_fin) +#define cpu_reset __glue(CPU_NAME,_reset) +#define cpu_do_idle __glue(CPU_NAME,_do_idle) +#define cpu_dcache_clean_area __glue(CPU_NAME,_dcache_clean_area) +#define cpu_do_switch_mm __glue(CPU_NAME,_switch_mm) +#define cpu_set_pte_ext __glue(CPU_NAME,_set_pte_ext) +#endif + +#endif diff --git a/arch/arm/include/asm/glue.h b/arch/arm/include/asm/glue.h index 234a3fc1c78..0ec35d1698a 100644 --- a/arch/arm/include/asm/glue.h +++ b/arch/arm/include/asm/glue.h @@ -15,7 +15,6 @@ */ #ifdef __KERNEL__ - #ifdef __STDC__ #define ____glue(name,fn) name##fn #else @@ -23,141 +22,4 @@ #endif #define __glue(name,fn) ____glue(name,fn) - - -/* - * Data Abort Model - * ================ - * - * We have the following to choose from: - * arm6 - ARM6 style - * arm7 - ARM7 style - * v4_early - ARMv4 without Thumb early abort handler - * v4t_late - ARMv4 with Thumb late abort handler - * v4t_early - ARMv4 with Thumb early abort handler - * v5tej_early - ARMv5 with Thumb and Java early abort handler - * xscale - ARMv5 with Thumb with Xscale extensions - * v6_early - ARMv6 generic early abort handler - * v7_early - ARMv7 generic early abort handler - */ -#undef CPU_DABORT_HANDLER -#undef MULTI_DABORT - -#if defined(CONFIG_CPU_ARM610) -# ifdef CPU_DABORT_HANDLER -# define MULTI_DABORT 1 -# else -# define CPU_DABORT_HANDLER cpu_arm6_data_abort -# endif -#endif - -#if defined(CONFIG_CPU_ARM710) -# ifdef CPU_DABORT_HANDLER -# define MULTI_DABORT 1 -# else -# define CPU_DABORT_HANDLER cpu_arm7_data_abort -# endif -#endif - -#ifdef CONFIG_CPU_ABRT_LV4T -# ifdef CPU_DABORT_HANDLER -# define MULTI_DABORT 1 -# else -# define CPU_DABORT_HANDLER v4t_late_abort -# endif -#endif - -#ifdef CONFIG_CPU_ABRT_EV4 -# ifdef CPU_DABORT_HANDLER -# define MULTI_DABORT 1 -# else -# define CPU_DABORT_HANDLER v4_early_abort -# endif -#endif - -#ifdef CONFIG_CPU_ABRT_EV4T -# ifdef CPU_DABORT_HANDLER -# define MULTI_DABORT 1 -# else -# define CPU_DABORT_HANDLER v4t_early_abort -# endif -#endif - -#ifdef CONFIG_CPU_ABRT_EV5TJ -# ifdef CPU_DABORT_HANDLER -# define MULTI_DABORT 1 -# else -# define CPU_DABORT_HANDLER v5tj_early_abort -# endif -#endif - -#ifdef CONFIG_CPU_ABRT_EV5T -# ifdef CPU_DABORT_HANDLER -# define MULTI_DABORT 1 -# else -# define CPU_DABORT_HANDLER v5t_early_abort -# endif -#endif - -#ifdef CONFIG_CPU_ABRT_EV6 -# ifdef CPU_DABORT_HANDLER -# define MULTI_DABORT 1 -# else -# define CPU_DABORT_HANDLER v6_early_abort -# endif -#endif - -#ifdef CONFIG_CPU_ABRT_EV7 -# ifdef CPU_DABORT_HANDLER -# define MULTI_DABORT 1 -# else -# define CPU_DABORT_HANDLER v7_early_abort -# endif -#endif - -#ifndef CPU_DABORT_HANDLER -#error Unknown data abort handler type -#endif - -/* - * Prefetch Abort Model - * ================ - * - * We have the following to choose from: - * legacy - no IFSR, no IFAR - * v6 - ARMv6: IFSR, no IFAR - * v7 - ARMv7: IFSR and IFAR - */ - -#undef CPU_PABORT_HANDLER -#undef MULTI_PABORT - -#ifdef CONFIG_CPU_PABRT_LEGACY -# ifdef CPU_PABORT_HANDLER -# define MULTI_PABORT 1 -# else -# define CPU_PABORT_HANDLER legacy_pabort -# endif -#endif - -#ifdef CONFIG_CPU_PABRT_V6 -# ifdef CPU_PABORT_HANDLER -# define MULTI_PABORT 1 -# else -# define CPU_PABORT_HANDLER v6_pabort -# endif -#endif - -#ifdef CONFIG_CPU_PABRT_V7 -# ifdef CPU_PABORT_HANDLER -# define MULTI_PABORT 1 -# else -# define CPU_PABORT_HANDLER v7_pabort -# endif -#endif - -#ifndef CPU_PABORT_HANDLER -#error Unknown prefetch abort handler type -#endif - #endif diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h index 8fdae9bc9ab..69802150be2 100644 --- a/arch/arm/include/asm/proc-fns.h +++ b/arch/arm/include/asm/proc-fns.h @@ -13,248 +13,77 @@ #ifdef __KERNEL__ +#include +#include -/* - * Work out if we need multiple CPU support - */ -#undef MULTI_CPU -#undef CPU_NAME +#ifndef __ASSEMBLY__ + +struct mm_struct; /* - * CPU_NAME - the prefix for CPU related functions + * Don't change this structure - ASM code relies on it. */ - -#ifdef CONFIG_CPU_ARM610 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm6 -# endif -#endif - -#ifdef CONFIG_CPU_ARM7TDMI -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm7tdmi -# endif -#endif - -#ifdef CONFIG_CPU_ARM710 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm7 -# endif -#endif - -#ifdef CONFIG_CPU_ARM720T -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm720 -# endif -#endif - -#ifdef CONFIG_CPU_ARM740T -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm740 -# endif -#endif - -#ifdef CONFIG_CPU_ARM9TDMI -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm9tdmi -# endif -#endif - -#ifdef CONFIG_CPU_ARM920T -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm920 -# endif -#endif - -#ifdef CONFIG_CPU_ARM922T -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm922 -# endif -#endif - -#ifdef CONFIG_CPU_FA526 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_fa526 -# endif -#endif - -#ifdef CONFIG_CPU_ARM925T -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm925 -# endif -#endif - -#ifdef CONFIG_CPU_ARM926T -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm926 -# endif -#endif - -#ifdef CONFIG_CPU_ARM940T -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm940 -# endif -#endif - -#ifdef CONFIG_CPU_ARM946E -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm946 -# endif -#endif - -#ifdef CONFIG_CPU_SA110 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_sa110 -# endif -#endif - -#ifdef CONFIG_CPU_SA1100 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_sa1100 -# endif -#endif - -#ifdef CONFIG_CPU_ARM1020 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm1020 -# endif -#endif - -#ifdef CONFIG_CPU_ARM1020E -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm1020e -# endif -#endif - -#ifdef CONFIG_CPU_ARM1022 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm1022 -# endif -#endif - -#ifdef CONFIG_CPU_ARM1026 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_arm1026 -# endif -#endif - -#ifdef CONFIG_CPU_XSCALE -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_xscale -# endif -#endif - -#ifdef CONFIG_CPU_XSC3 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_xsc3 -# endif -#endif - -#ifdef CONFIG_CPU_MOHAWK -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_mohawk -# endif -#endif - -#ifdef CONFIG_CPU_FEROCEON -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_feroceon -# endif -#endif - -#ifdef CONFIG_CPU_V6 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_v6 -# endif -#endif - -#ifdef CONFIG_CPU_V7 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_v7 -# endif -#endif - -#ifndef __ASSEMBLY__ +extern struct processor { + /* MISC + * get data abort address/flags + */ + void (*_data_abort)(unsigned long pc); + /* + * Retrieve prefetch fault address + */ + unsigned long (*_prefetch_abort)(unsigned long lr); + /* + * Set up any processor specifics + */ + void (*_proc_init)(void); + /* + * Disable any processor specifics + */ + void (*_proc_fin)(void); + /* + * Special stuff for a reset + */ + void (*reset)(unsigned long addr) __attribute__((noreturn)); + /* + * Idle the processor + */ + int (*_do_idle)(void); + /* + * Processor architecture specific + */ + /* + * clean a virtual address range from the + * D-cache without flushing the cache. + */ + void (*dcache_clean_area)(void *addr, int size); + + /* + * Set the page table + */ + void (*switch_mm)(unsigned long pgd_phys, struct mm_struct *mm); + /* + * Set a possibly extended PTE. Non-extended PTEs should + * ignore 'ext'. + */ + void (*set_pte_ext)(pte_t *ptep, pte_t pte, unsigned int ext); +} processor; #ifndef MULTI_CPU -#include +extern void cpu_proc_init(void); +extern void cpu_proc_fin(void); +extern int cpu_do_idle(void); +extern void cpu_dcache_clean_area(void *, int); +extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm); +extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext); +extern void cpu_reset(unsigned long addr) __attribute__((noreturn)); #else -#include +#define cpu_proc_init() processor._proc_init() +#define cpu_proc_fin() processor._proc_fin() +#define cpu_reset(addr) processor.reset(addr) +#define cpu_do_idle() processor._do_idle() +#define cpu_dcache_clean_area(addr,sz) processor.dcache_clean_area(addr,sz) +#define cpu_set_pte_ext(ptep,pte,ext) processor.set_pte_ext(ptep,pte,ext) +#define cpu_do_switch_mm(pgd,mm) processor.switch_mm(pgd,mm) #endif #include diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index 82da6617213..5302a917271 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -13,6 +13,8 @@ #include #include #include +#include +#include #include #include #include diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 2b46fea36c9..e8d88567680 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -16,7 +16,8 @@ */ #include -#include +#include +#include #include #include #include -- cgit v1.2.3-18-g5258 From 1c9d16e35911090dee3f9313e6af13af623d66ee Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Fri, 11 Feb 2011 18:17:54 +0100 Subject: x86: Fix mwait_usable section mismatch We use it in non __cpuinit code now too so drop marker. Signed-off-by: Borislav Petkov LKML-Reference: <20110211171754.GA21047@aftab> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/cpu.h | 2 +- arch/x86/kernel/process.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/cpu.h b/arch/x86/include/asm/cpu.h index 6e6e7558e70..4564c8e28a3 100644 --- a/arch/x86/include/asm/cpu.h +++ b/arch/x86/include/asm/cpu.h @@ -32,6 +32,6 @@ extern void arch_unregister_cpu(int); DECLARE_PER_CPU(int, cpu_state); -int __cpuinit mwait_usable(const struct cpuinfo_x86 *); +int mwait_usable(const struct cpuinfo_x86 *); #endif /* _ASM_X86_CPU_H */ diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index e764fc05d70..3c189e9accd 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -506,7 +506,7 @@ static void poll_idle(void) #define MWAIT_ECX_EXTENDED_INFO 0x01 #define MWAIT_EDX_C1 0xf0 -int __cpuinit mwait_usable(const struct cpuinfo_x86 *c) +int mwait_usable(const struct cpuinfo_x86 *c) { u32 eax, ebx, ecx, edx; -- cgit v1.2.3-18-g5258 From 60f6e65d7887c257392313755f95540ef5e7ea89 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Mon, 17 Jan 2011 10:52:02 +0800 Subject: x86: Cleanup vector usage Cleanup the vector usage and make them continuous if possible. Signed-off-by: Shaohua Li Cc: Andi Kleen Cc: Eric Dumazet LKML-Reference: <1295232722.1949.707.camel@sli10-conroe> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/irq_vectors.h | 40 ++++++++++++++++++++------------------ 1 file changed, 21 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h index 6af0894dafb..42f0d4a30f1 100644 --- a/arch/x86/include/asm/irq_vectors.h +++ b/arch/x86/include/asm/irq_vectors.h @@ -1,6 +1,7 @@ #ifndef _ASM_X86_IRQ_VECTORS_H #define _ASM_X86_IRQ_VECTORS_H +#include /* * Linux IRQ vector layout. * @@ -16,8 +17,8 @@ * Vectors 0 ... 31 : system traps and exceptions - hardcoded events * Vectors 32 ... 127 : device interrupts * Vector 128 : legacy int80 syscall interface - * Vectors 129 ... 237 : device interrupts - * Vectors 238 ... 255 : special interrupts + * Vectors 129 ... 229 : device interrupts + * Vectors 230 ... 255 : special interrupts * * 64-bit x86 has per CPU IDT tables, 32-bit has one shared IDT table. * @@ -96,37 +97,38 @@ #define THRESHOLD_APIC_VECTOR 0xf9 #define REBOOT_VECTOR 0xf8 -/* f0-f7 used for spreading out TLB flushes: */ -#define INVALIDATE_TLB_VECTOR_END 0xf7 -#define INVALIDATE_TLB_VECTOR_START 0xf0 -#define NUM_INVALIDATE_TLB_VECTORS 8 - -/* - * Local APIC timer IRQ vector is on a different priority level, - * to work around the 'lost local interrupt if more than 2 IRQ - * sources per level' errata. - */ -#define LOCAL_TIMER_VECTOR 0xef - /* * Generic system vector for platform specific use */ -#define X86_PLATFORM_IPI_VECTOR 0xed +#define X86_PLATFORM_IPI_VECTOR 0xf7 /* * IRQ work vector: */ -#define IRQ_WORK_VECTOR 0xec +#define IRQ_WORK_VECTOR 0xf6 -#define UV_BAU_MESSAGE 0xea +#define UV_BAU_MESSAGE 0xf5 /* * Self IPI vector for machine checks */ -#define MCE_SELF_VECTOR 0xeb +#define MCE_SELF_VECTOR 0xf4 /* Xen vector callback to receive events in a HVM domain */ -#define XEN_HVM_EVTCHN_CALLBACK 0xe9 +#define XEN_HVM_EVTCHN_CALLBACK 0xf3 + +/* + * Local APIC timer IRQ vector is on a different priority level, + * to work around the 'lost local interrupt if more than 2 IRQ + * sources per level' errata. + */ +#define LOCAL_TIMER_VECTOR 0xef + +/* f0-f7 used for spreading out TLB flushes: */ +#define NUM_INVALIDATE_TLB_VECTORS 8 +#define INVALIDATE_TLB_VECTOR_END 0xee +#define INVALIDATE_TLB_VECTOR_START \ + (INVALIDATE_TLB_VECTOR_END - NUM_INVALIDATE_TLB_VECTORS + 1) #define NR_VECTORS 256 -- cgit v1.2.3-18-g5258 From 3a09fb4570a1cce11472b8e5da3f6ee409f529d5 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Mon, 17 Jan 2011 10:52:05 +0800 Subject: x86: Allocate 32 tlb_invalidate_interrupt handler stubs Add up to 32 invalidate_interrupt handlers. How many handlers are added depends on NUM_INVALIDATE_TLB_VECTORS. So if NUM_INVALIDATE_TLB_VECTORS is smaller than 32, we reduce code size. Signed-off-by: Shaohua Li Cc: Andi Kleen Cc: Eric Dumazet LKML-Reference: <1295232725.1949.708.camel@sli10-conroe> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/entry_arch.h | 5 ++- arch/x86/include/asm/hw_irq.h | 24 ++++++++++++ arch/x86/kernel/entry_64.S | 5 ++- arch/x86/kernel/irqinit.c | 79 +++++++++++++++++++++++++++++++++++---- 4 files changed, 103 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/entry_arch.h b/arch/x86/include/asm/entry_arch.h index 57650ab4a5f..1cd6d26a0a8 100644 --- a/arch/x86/include/asm/entry_arch.h +++ b/arch/x86/include/asm/entry_arch.h @@ -16,10 +16,13 @@ BUILD_INTERRUPT(call_function_single_interrupt,CALL_FUNCTION_SINGLE_VECTOR) BUILD_INTERRUPT(irq_move_cleanup_interrupt,IRQ_MOVE_CLEANUP_VECTOR) BUILD_INTERRUPT(reboot_interrupt,REBOOT_VECTOR) -.irpc idx, "01234567" +.irp idx,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15, \ + 16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31 +.if NUM_INVALIDATE_TLB_VECTORS > \idx BUILD_INTERRUPT3(invalidate_interrupt\idx, (INVALIDATE_TLB_VECTOR_START)+\idx, smp_invalidate_interrupt) +.endif .endr #endif diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h index 0274ec5a7e6..bb9efe8706e 100644 --- a/arch/x86/include/asm/hw_irq.h +++ b/arch/x86/include/asm/hw_irq.h @@ -45,6 +45,30 @@ extern void invalidate_interrupt4(void); extern void invalidate_interrupt5(void); extern void invalidate_interrupt6(void); extern void invalidate_interrupt7(void); +extern void invalidate_interrupt8(void); +extern void invalidate_interrupt9(void); +extern void invalidate_interrupt10(void); +extern void invalidate_interrupt11(void); +extern void invalidate_interrupt12(void); +extern void invalidate_interrupt13(void); +extern void invalidate_interrupt14(void); +extern void invalidate_interrupt15(void); +extern void invalidate_interrupt16(void); +extern void invalidate_interrupt17(void); +extern void invalidate_interrupt18(void); +extern void invalidate_interrupt19(void); +extern void invalidate_interrupt20(void); +extern void invalidate_interrupt21(void); +extern void invalidate_interrupt22(void); +extern void invalidate_interrupt23(void); +extern void invalidate_interrupt24(void); +extern void invalidate_interrupt25(void); +extern void invalidate_interrupt26(void); +extern void invalidate_interrupt27(void); +extern void invalidate_interrupt28(void); +extern void invalidate_interrupt29(void); +extern void invalidate_interrupt30(void); +extern void invalidate_interrupt31(void); extern void irq_move_cleanup_interrupt(void); extern void reboot_interrupt(void); diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index aed1ffbeb0c..891268c645e 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -975,9 +975,12 @@ apicinterrupt X86_PLATFORM_IPI_VECTOR \ x86_platform_ipi smp_x86_platform_ipi #ifdef CONFIG_SMP -.irpc idx, "01234567" +.irp idx,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15, \ + 16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31 +.if NUM_INVALIDATE_TLB_VECTORS > \idx apicinterrupt (INVALIDATE_TLB_VECTOR_START)+\idx \ invalidate_interrupt\idx smp_invalidate_interrupt +.endif .endr #endif diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c index c752e973958..7aad10a63e0 100644 --- a/arch/x86/kernel/irqinit.c +++ b/arch/x86/kernel/irqinit.c @@ -164,14 +164,77 @@ static void __init smp_intr_init(void) alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); /* IPIs for invalidation */ - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); +#define ALLOC_INVTLB_VEC(NR) \ + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+NR, \ + invalidate_interrupt##NR) + + switch (NUM_INVALIDATE_TLB_VECTORS) { + default: + ALLOC_INVTLB_VEC(31); + case 31: + ALLOC_INVTLB_VEC(30); + case 30: + ALLOC_INVTLB_VEC(29); + case 29: + ALLOC_INVTLB_VEC(28); + case 28: + ALLOC_INVTLB_VEC(27); + case 27: + ALLOC_INVTLB_VEC(26); + case 26: + ALLOC_INVTLB_VEC(25); + case 25: + ALLOC_INVTLB_VEC(24); + case 24: + ALLOC_INVTLB_VEC(23); + case 23: + ALLOC_INVTLB_VEC(22); + case 22: + ALLOC_INVTLB_VEC(21); + case 21: + ALLOC_INVTLB_VEC(20); + case 20: + ALLOC_INVTLB_VEC(19); + case 19: + ALLOC_INVTLB_VEC(18); + case 18: + ALLOC_INVTLB_VEC(17); + case 17: + ALLOC_INVTLB_VEC(16); + case 16: + ALLOC_INVTLB_VEC(15); + case 15: + ALLOC_INVTLB_VEC(14); + case 14: + ALLOC_INVTLB_VEC(13); + case 13: + ALLOC_INVTLB_VEC(12); + case 12: + ALLOC_INVTLB_VEC(11); + case 11: + ALLOC_INVTLB_VEC(10); + case 10: + ALLOC_INVTLB_VEC(9); + case 9: + ALLOC_INVTLB_VEC(8); + case 8: + ALLOC_INVTLB_VEC(7); + case 7: + ALLOC_INVTLB_VEC(6); + case 6: + ALLOC_INVTLB_VEC(5); + case 5: + ALLOC_INVTLB_VEC(4); + case 4: + ALLOC_INVTLB_VEC(3); + case 3: + ALLOC_INVTLB_VEC(2); + case 2: + ALLOC_INVTLB_VEC(1); + case 1: + ALLOC_INVTLB_VEC(0); + break; + } /* IPI for generic function call */ alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); -- cgit v1.2.3-18-g5258 From 70e4a369733a21e3d16b059a6ccdad22a344bf57 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Mon, 17 Jan 2011 10:52:07 +0800 Subject: x86: Scale up the number of TLB invalidate vectors with NR_CPUs, up to 32 Make the maxium TLB invalidate vectors depend on NR_CPUS linearly, with a maximum of 32 vectors. We currently only have 8 vectors for TLB invalidation and that is clearly inadequate. If we have a lot of CPUs, the CPUs need share the 8 vectors and tlbstate_lock is used to protect them. flush_tlb_page() is heavily used in page reclaim, which will cause a lot of lock contention for tlbstate_lock. Andi Kleen suggested increasing the vectors number to 32, which should be good for current typical systems to reduce the tlbstate_lock contention. My test system has 4 sockets and 64G memory, and 64 CPUs. My workload creates 64 processes. Each process mmap reads a big empty sparse file. The total size of the files are 2*total_mem, so this will cause a lot of page reclaim. Below is the result I get from perf call-graph profiling: without the patch: ------------------ 24.25% usemem [kernel] [k] _raw_spin_lock | --- _raw_spin_lock | |--42.15%-- native_flush_tlb_others with the patch: ------------------ 14.96% usemem [kernel] [k] _raw_spin_lock | --- _raw_spin_lock |--13.89%-- native_flush_tlb_others So this heavily reduces the tlbstate_lock contention. Suggested-by: Andi Kleen Signed-off-by: Shaohua Li Cc: Eric Dumazet Cc: Arnaldo Carvalho de Melo Cc: Frederic Weisbecker Cc: Peter Zijlstra LKML-Reference: <1295232727.1949.709.camel@sli10-conroe> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/irq_vectors.h | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h index 42f0d4a30f1..4980f48bbbb 100644 --- a/arch/x86/include/asm/irq_vectors.h +++ b/arch/x86/include/asm/irq_vectors.h @@ -17,8 +17,8 @@ * Vectors 0 ... 31 : system traps and exceptions - hardcoded events * Vectors 32 ... 127 : device interrupts * Vector 128 : legacy int80 syscall interface - * Vectors 129 ... 229 : device interrupts - * Vectors 230 ... 255 : special interrupts + * Vectors 129 ... INVALIDATE_TLB_VECTOR_START-1 : device interrupts + * Vectors INVALIDATE_TLB_VECTOR_START ... 255 : special interrupts * * 64-bit x86 has per CPU IDT tables, 32-bit has one shared IDT table. * @@ -124,8 +124,13 @@ */ #define LOCAL_TIMER_VECTOR 0xef -/* f0-f7 used for spreading out TLB flushes: */ -#define NUM_INVALIDATE_TLB_VECTORS 8 +/* up to 32 vectors used for spreading out TLB flushes: */ +#if NR_CPUS <= 32 +# define NUM_INVALIDATE_TLB_VECTORS NR_CPUS +#else +# define NUM_INVALIDATE_TLB_VECTORS 32 +#endif + #define INVALIDATE_TLB_VECTOR_END 0xee #define INVALIDATE_TLB_VECTOR_START \ (INVALIDATE_TLB_VECTOR_END - NUM_INVALIDATE_TLB_VECTORS + 1) -- cgit v1.2.3-18-g5258 From 7064d865af804b9b841e7b9a3e9b653e40c3e5ca Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Mon, 17 Jan 2011 10:52:10 +0800 Subject: x86: Avoid tlbstate lock if not enough cpus This one isn't related to previous patch. If online cpus are below NUM_INVALIDATE_TLB_VECTORS, we don't need the lock. The comments in the code declares we don't need the check, but a hot lock still needs an atomic operation and expensive, so add the check here. Uses nr_cpu_ids here as suggested by Eric Dumazet. Signed-off-by: Shaohua Li Acked-by: Eric Dumazet Cc: Andi Kleen LKML-Reference: <1295232730.1949.710.camel@sli10-conroe> Signed-off-by: Ingo Molnar --- arch/x86/mm/tlb.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c index 6acc724d5d8..55272d7c3b0 100644 --- a/arch/x86/mm/tlb.c +++ b/arch/x86/mm/tlb.c @@ -179,12 +179,8 @@ static void flush_tlb_others_ipi(const struct cpumask *cpumask, sender = this_cpu_read(tlb_vector_offset); f = &flush_state[sender]; - /* - * Could avoid this lock when - * num_online_cpus() <= NUM_INVALIDATE_TLB_VECTORS, but it is - * probably not worth checking this for a cache-hot lock. - */ - raw_spin_lock(&f->tlbstate_lock); + if (nr_cpu_ids > NUM_INVALIDATE_TLB_VECTORS) + raw_spin_lock(&f->tlbstate_lock); f->flush_mm = mm; f->flush_va = va; @@ -202,7 +198,8 @@ static void flush_tlb_others_ipi(const struct cpumask *cpumask, f->flush_mm = NULL; f->flush_va = 0; - raw_spin_unlock(&f->tlbstate_lock); + if (nr_cpu_ids > NUM_INVALIDATE_TLB_VECTORS) + raw_spin_unlock(&f->tlbstate_lock); } void native_flush_tlb_others(const struct cpumask *cpumask, -- cgit v1.2.3-18-g5258 From 77eed821accf5dd962b1f13bed0680e217e49112 Mon Sep 17 00:00:00 2001 From: Kamal Mostafa Date: Thu, 3 Feb 2011 17:38:04 -0800 Subject: x86: Fix panic when handling "mem={invalid}" param Avoid removing all of memory and panicing when "mem={invalid}" is specified, e.g. mem=blahblah, mem=0, or mem=nopentium (on platforms other than x86_32). Signed-off-by: Kamal Mostafa BugLink: http://bugs.launchpad.net/bugs/553464 Cc: Yinghai Lu Cc: Len Brown Cc: Rafael J. Wysocki Cc: # .3x: as far back as it applies LKML-Reference: <1296783486-23033-1-git-send-email-kamal@canonical.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/e820.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 294f26da0c0..55a59d889db 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -856,6 +856,9 @@ static int __init parse_memopt(char *p) userdef = 1; mem_size = memparse(p, &p); + /* don't remove all of memory when handling "mem={invalid}" param */ + if (mem_size == 0) + return -EINVAL; e820_remove_range(mem_size, ULLONG_MAX - mem_size, E820_RAM, 1); return 0; -- cgit v1.2.3-18-g5258 From 9a6d44b9adb777ca9549e88cd55bd8f2673c52a2 Mon Sep 17 00:00:00 2001 From: Kamal Mostafa Date: Thu, 3 Feb 2011 17:38:05 -0800 Subject: x86: Emit "mem=nopentium ignored" warning when not supported Emit warning when "mem=nopentium" is specified on any arch other than x86_32 (the only that arch supports it). Signed-off-by: Kamal Mostafa BugLink: http://bugs.launchpad.net/bugs/553464 Cc: Yinghai Lu Cc: Len Brown Cc: Rafael J. Wysocki LKML-Reference: <1296783486-23033-2-git-send-email-kamal@canonical.com> Signed-off-by: Ingo Molnar Cc: --- arch/x86/kernel/e820.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 55a59d889db..0b5e2b54656 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -847,12 +847,15 @@ static int __init parse_memopt(char *p) if (!p) return -EINVAL; -#ifdef CONFIG_X86_32 if (!strcmp(p, "nopentium")) { +#ifdef CONFIG_X86_32 setup_clear_cpu_cap(X86_FEATURE_PSE); return 0; - } +#else + printk(KERN_WARNING "mem=nopentium ignored! (only supported on x86_32)\n"); + return -EINVAL; #endif + } userdef = 1; mem_size = memparse(p, &p); -- cgit v1.2.3-18-g5258 From e5fea868e6c04343e501176a373d568c1c0094aa Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 8 Feb 2011 23:22:17 -0800 Subject: x86: Fix and clean up generic_processor_info() One of the error printouts in generic_processor_info() prints out the APIC version instead of the cpu index the warning text describes. Move version validation down, after we get the right cpu index. -v2: add comments about reason why we can have cpu=0 there. Signed-off-by: Yinghai Lu LKML-Reference: <4D5240A9.4080703@kernel.org> [ Cleaned up and made the BIOS bug printouts more consistent ] Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/apic.c | 39 ++++++++++++++++++++------------------- 1 file changed, 20 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 06c196d7e59..628dcdb7afd 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1925,17 +1925,6 @@ void __cpuinit generic_processor_info(int apicid, int version) { int cpu; - /* - * Validate version - */ - if (version == 0x0) { - pr_warning("BIOS bug, APIC version is 0 for CPU#%d! " - "fixing up to 0x10. (tell your hw vendor)\n", - version); - version = 0x10; - } - apic_version[apicid] = version; - if (num_processors >= nr_cpu_ids) { int max = nr_cpu_ids; int thiscpu = max + disabled_cpus; @@ -1949,22 +1938,34 @@ void __cpuinit generic_processor_info(int apicid, int version) } num_processors++; - cpu = cpumask_next_zero(-1, cpu_present_mask); - - if (version != apic_version[boot_cpu_physical_apicid]) - WARN_ONCE(1, - "ACPI: apic version mismatch, bootcpu: %x cpu %d: %x\n", - apic_version[boot_cpu_physical_apicid], cpu, version); - - physid_set(apicid, phys_cpu_present_map); if (apicid == boot_cpu_physical_apicid) { /* * x86_bios_cpu_apicid is required to have processors listed * in same order as logical cpu numbers. Hence the first * entry is BSP, and so on. + * boot_cpu_init() already hold bit 0 in cpu_present_mask + * for BSP. */ cpu = 0; + } else + cpu = cpumask_next_zero(-1, cpu_present_mask); + + /* + * Validate version + */ + if (version == 0x0) { + pr_warning("BIOS bug: APIC version is 0 for CPU %d/0x%x, fixing up to 0x10\n", + cpu, apicid); + version = 0x10; } + apic_version[apicid] = version; + + if (version != apic_version[boot_cpu_physical_apicid]) { + pr_warning("BIOS bug: APIC version mismatch, boot CPU: %x, CPU %d: version %x\n", + apic_version[boot_cpu_physical_apicid], cpu, version); + } + + physid_set(apicid, phys_cpu_present_map); if (apicid > max_physical_apicid) max_physical_apicid = apicid; -- cgit v1.2.3-18-g5258 From 14392fd329eca9b59d51c0aa5d0acfb4965424d1 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Mon, 7 Feb 2011 14:08:53 -0800 Subject: x86, numa: Add error handling for bad cpu-to-node mappings CONFIG_DEBUG_PER_CPU_MAPS may return NUMA_NO_NODE when an early_cpu_to_node() mapping hasn't been initialized. In such a case, it emits a warning and continues without an issue but callers may try to use the return value to index into an array. We can catch those errors and fail silently since a warning has already been emitted. No current user of numa_add_cpu() requires this error checking to avoid a crash, but it's better to be proactive in case a future user happens to have a bug and a user tries to diagnose it with CONFIG_DEBUG_PER_CPU_MAPS. Reported-by: Jesper Juhl Signed-off-by: David Rientjes Cc: Tejun Heo LKML-Reference: Signed-off-by: Ingo Molnar --- arch/x86/mm/numa.c | 4 ++++ arch/x86/mm/numa_64.c | 4 ++++ 2 files changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c index bf60715bd1b..9559d360fde 100644 --- a/arch/x86/mm/numa.c +++ b/arch/x86/mm/numa.c @@ -219,6 +219,10 @@ struct cpumask __cpuinit *debug_cpumask_set_cpu(int cpu, int enable) struct cpumask *mask; char buf[64]; + if (node == NUMA_NO_NODE) { + /* early_cpu_to_node() already emits a warning and trace */ + return NULL; + } mask = node_to_cpumask_map[node]; if (!mask) { pr_err("node_to_cpumask_map[%i] NULL\n", node); diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index f548fbf75f4..3f9411ed3cd 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -709,6 +709,10 @@ static void __cpuinit numa_set_cpumask(int cpu, int enable) struct cpumask *mask; int i; + if (node == NUMA_NO_NODE) { + /* early_cpu_to_node() already emits a warning and trace */ + return; + } for_each_online_node(i) { unsigned long addr; -- cgit v1.2.3-18-g5258 From 6b617e224dfac0b64ed70dacdac50be6eb78a6a1 Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Tue, 15 Feb 2011 00:13:31 +0800 Subject: x86/platform: Add a wallclock_init func to x86_init.timers ops Some wall clock devices use MMIO based HW register, this new function will give them a chance to do some initialization work before their get/set_time service get called, which is usually in early kernel boot phase. Signed-off-by: Feng Tang Signed-off-by: Jacob Pan Signed-off-by: Alan Cox Signed-off-by: Thomas Gleixner --- arch/x86/include/asm/x86_init.h | 2 ++ arch/x86/kernel/setup.c | 2 ++ arch/x86/kernel/x86_init.c | 1 + 3 files changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h index 64642ad019f..643ebf2e2ad 100644 --- a/arch/x86/include/asm/x86_init.h +++ b/arch/x86/include/asm/x86_init.h @@ -83,11 +83,13 @@ struct x86_init_paging { * boot cpu * @tsc_pre_init: platform function called before TSC init * @timer_init: initialize the platform timer (default PIT/HPET) + * @wallclock_init: init the wallclock device */ struct x86_init_timers { void (*setup_percpu_clockev)(void); void (*tsc_pre_init)(void); void (*timer_init)(void); + void (*wallclock_init)(void); }; /** diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 21c6746338a..68d535a77df 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -1059,6 +1059,8 @@ void __init setup_arch(char **cmdline_p) #endif x86_init.oem.banner(); + x86_init.timers.wallclock_init(); + mcheck_init(); local_irq_save(flags); diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c index ceb2911aa43..c11514e9128 100644 --- a/arch/x86/kernel/x86_init.c +++ b/arch/x86/kernel/x86_init.c @@ -70,6 +70,7 @@ struct x86_init_ops x86_init __initdata = { .setup_percpu_clockev = setup_boot_APIC_clock, .tsc_pre_init = x86_init_noop, .timer_init = hpet_time_init, + .wallclock_init = x86_init_noop, }, .iommu = { -- cgit v1.2.3-18-g5258 From 168202c7bf89d7a2abaf8deaf4bbed18a1f7b3a3 Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Tue, 15 Feb 2011 00:13:32 +0800 Subject: mrst/vrtc: Avoid using cmos rtc ops If we don't assign Moorestown specific wallclock init and ops function the rtc/persisent clock code will use cmos rtc for access, this will crash Moorestown in that the ioports are not present. Also in vrtc driver, should avoid using cmos access to check UIP status. [feng.tang@intel.com: use set_fixmap_offset_nocache() to simplify code] Signed-off-by: Jacob Pan Signed-off-by: Feng Tang Signed-off-by: Alan Cox Signed-off-by: Thomas Gleixner --- arch/x86/platform/mrst/mrst.c | 2 ++ arch/x86/platform/mrst/vrtc.c | 16 ++++------------ 2 files changed, 6 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c index fee0b4914e0..4c542c757cb 100644 --- a/arch/x86/platform/mrst/mrst.c +++ b/arch/x86/platform/mrst/mrst.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include #include @@ -294,6 +295,7 @@ void __init x86_mrst_early_setup(void) x86_platform.calibrate_tsc = mrst_calibrate_tsc; x86_platform.i8042_detect = mrst_i8042_detect; + x86_init.timers.wallclock_init = mrst_rtc_init; x86_init.pci.init = pci_mrst_init; x86_init.pci.fixup_irqs = x86_init_noop; diff --git a/arch/x86/platform/mrst/vrtc.c b/arch/x86/platform/mrst/vrtc.c index 32cd7edd71a..04cf645feb9 100644 --- a/arch/x86/platform/mrst/vrtc.c +++ b/arch/x86/platform/mrst/vrtc.c @@ -100,22 +100,14 @@ int vrtc_set_mmss(unsigned long nowtime) void __init mrst_rtc_init(void) { - unsigned long rtc_paddr; - void __iomem *virt_base; + unsigned long vrtc_paddr = sfi_mrtc_array[0].phys_addr; sfi_table_parse(SFI_SIG_MRTC, NULL, NULL, sfi_parse_mrtc); - if (!sfi_mrtc_num) + if (!sfi_mrtc_num || !vrtc_paddr) return; - rtc_paddr = sfi_mrtc_array[0].phys_addr; - - /* vRTC's register address may not be page aligned */ - set_fixmap_nocache(FIX_LNW_VRTC, rtc_paddr); - - virt_base = (void __iomem *)__fix_to_virt(FIX_LNW_VRTC); - virt_base += rtc_paddr & ~PAGE_MASK; - vrtc_virt_base = virt_base; - + vrtc_virt_base = (void __iomem *)set_fixmap_offset_nocache(FIX_LNW_VRTC, + vrtc_paddr); x86_platform.get_wallclock = vrtc_get_time; x86_platform.set_wallclock = vrtc_set_mmss; } -- cgit v1.2.3-18-g5258 From 6ea96e7e4946f790330557e4b7c4c8a174c1c6d2 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 6 Feb 2011 22:45:31 +0000 Subject: um: Remove stale irq_chip.end irq_chip.end got obsolete with the remnoval of __do_IRQ(). Signed-off-by: Thomas Gleixner Cc: Jeff Dike Cc: Peter Zijlstra Cc: Andrew Morton LKML-Reference: <20110206224515.135703209@linutronix.de> --- arch/um/kernel/irq.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/um/kernel/irq.c b/arch/um/kernel/irq.c index 3f0ac9e0c96..c9167485431 100644 --- a/arch/um/kernel/irq.c +++ b/arch/um/kernel/irq.c @@ -374,7 +374,6 @@ static struct irq_chip normal_irq_type = { .disable = dummy, .enable = dummy, .ack = dummy, - .end = dummy }; static struct irq_chip SIGVTALRM_irq_type = { @@ -384,7 +383,6 @@ static struct irq_chip SIGVTALRM_irq_type = { .disable = dummy, .enable = dummy, .ack = dummy, - .end = dummy }; void __init init_IRQ(void) -- cgit v1.2.3-18-g5258 From 1d119aa06fb2b2608151a162f15c480d46694b65 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 6 Feb 2011 22:45:34 +0000 Subject: um: Convert irq_chips to new functions Signed-off-by: Thomas Gleixner Cc: Jeff Dike Cc: Andrew Morton LKML-Reference: <20110206224515.224027758@linutronix.de> --- arch/um/kernel/irq.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/um/kernel/irq.c b/arch/um/kernel/irq.c index c9167485431..f771b85833e 100644 --- a/arch/um/kernel/irq.c +++ b/arch/um/kernel/irq.c @@ -360,10 +360,10 @@ EXPORT_SYMBOL(um_request_irq); EXPORT_SYMBOL(reactivate_fd); /* - * irq_chip must define (startup || enable) && - * (shutdown || disable) && end + * irq_chip must define at least enable/disable and ack when + * the edge handler is used. */ -static void dummy(unsigned int irq) +static void dummy(struct irq_data *d) { } @@ -371,18 +371,17 @@ static void dummy(unsigned int irq) static struct irq_chip normal_irq_type = { .name = "SIGIO", .release = free_irq_by_irq_and_dev, - .disable = dummy, - .enable = dummy, - .ack = dummy, + .irq_disable = dummy, + .irq_enable = dummy, + .irq_ack = dummy, }; static struct irq_chip SIGVTALRM_irq_type = { .name = "SIGVTALRM", .release = free_irq_by_irq_and_dev, - .shutdown = dummy, /* never called */ - .disable = dummy, - .enable = dummy, - .ack = dummy, + .irq_disable = dummy, + .irq_enable = dummy, + .irq_ack = dummy, }; void __init init_IRQ(void) -- cgit v1.2.3-18-g5258 From d5b4eea1c575b78448fd5dc54d250ff302ca22f9 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 6 Feb 2011 22:45:36 +0000 Subject: um: Use proper accessors in show_interrupts() Signed-off-by: Thomas Gleixner Cc: Jeff Dike Cc: Andrew Morton LKML-Reference: <20110206224515.322707425@linutronix.de> --- arch/um/kernel/irq.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/um/kernel/irq.c b/arch/um/kernel/irq.c index f771b85833e..64cfea80cfe 100644 --- a/arch/um/kernel/irq.c +++ b/arch/um/kernel/irq.c @@ -35,8 +35,10 @@ int show_interrupts(struct seq_file *p, void *v) } if (i < NR_IRQS) { - raw_spin_lock_irqsave(&irq_desc[i].lock, flags); - action = irq_desc[i].action; + struct irq_desc *desc = irq_to_desc(i); + + raw_spin_lock_irqsave(&desc->lock, flags); + action = desc->action; if (!action) goto skip; seq_printf(p, "%3d: ",i); @@ -46,7 +48,7 @@ int show_interrupts(struct seq_file *p, void *v) for_each_online_cpu(j) seq_printf(p, "%10u ", kstat_irqs_cpu(i, j)); #endif - seq_printf(p, " %14s", irq_desc[i].chip->name); + seq_printf(p, " %14s", get_irq_desc_chip(desc)->name); seq_printf(p, " %s", action->name); for (action=action->next; action; action = action->next) @@ -54,7 +56,7 @@ int show_interrupts(struct seq_file *p, void *v) seq_putc(p, '\n'); skip: - raw_spin_unlock_irqrestore(&irq_desc[i].lock, flags); + raw_spin_unlock_irqrestore(&desc->lock, flags); } else if (i == NR_IRQS) seq_putc(p, '\n'); -- cgit v1.2.3-18-g5258 From 53c39ce56d203d80ba8217a16bb024b25185fb7e Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 6 Feb 2011 22:45:38 +0000 Subject: um: Select GENERIC_HARDIRQS_NO_DEPRECATED irq chips converted and proper accessor functions used. Signed-off-by: Thomas Gleixner Cc: Jeff Dike Cc: Andrew Morton LKML-Reference: <20110206224515.430825903@linutronix.de> --- arch/um/Kconfig.common | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/um/Kconfig.common b/arch/um/Kconfig.common index e351e14b433..1e78940218c 100644 --- a/arch/um/Kconfig.common +++ b/arch/um/Kconfig.common @@ -7,6 +7,7 @@ config UML bool default y select HAVE_GENERIC_HARDIRQS + select GENERIC_HARDIRQS_NO_DEPRECATED config MMU bool -- cgit v1.2.3-18-g5258 From 410f14837a92177242a403c20d0a0906fe357019 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Mon, 14 Feb 2011 12:58:04 +0100 Subject: ARM: 6667/1: Fix early_pte_alloc() assumption about the Linux PTE With LPAE we no longer have software bits in a separate Linux PTE and the early_pte_alloc() function should pass PTE_HWTABLE_OFF + PTE_HWTABLE_SIZE to early_alloc() to avoid allocating extra memory. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mm/mmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 546e44734db..7515d471864 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -532,7 +532,7 @@ static void __init *early_alloc(unsigned long sz) static pte_t * __init early_pte_alloc(pmd_t *pmd, unsigned long addr, unsigned long prot) { if (pmd_none(*pmd)) { - pte_t *pte = early_alloc(2 * PTRS_PER_PTE * sizeof(pte_t)); + pte_t *pte = early_alloc(PTE_HWTABLE_OFF + PTE_HWTABLE_SIZE); __pmd_populate(pmd, __pa(pte), prot); } BUG_ON(pmd_bad(*pmd)); -- cgit v1.2.3-18-g5258 From eca83258f1d81575576ca553075c641849150f23 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Fri, 11 Feb 2011 19:56:42 +0000 Subject: OMAP2420: mailbox: fix IVA vs DSP IRQ numbering The IRQ numbering for the IVA and DSP mailboxes was switched due to the wrong ordering in the OMAP2 mbox list. Switch the ordering so DSP is first and matches all the other SoCs. Tested on OMAP2420/n810. Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/mailbox.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index 394413dc7de..0a585dfa987 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -334,7 +334,7 @@ static struct omap_mbox mbox_iva_info = { .priv = &omap2_mbox_iva_priv, }; -struct omap_mbox *omap2_mboxes[] = { &mbox_iva_info, &mbox_dsp_info, NULL }; +struct omap_mbox *omap2_mboxes[] = { &mbox_dsp_info, &mbox_iva_info, NULL }; #endif #if defined(CONFIG_ARCH_OMAP4) -- cgit v1.2.3-18-g5258 From c03773206bf2249a890c4d420ed32ef500630095 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Fri, 11 Feb 2011 19:56:43 +0000 Subject: OMAP2+: mailbox: fix lookups for multiple mailboxes The pointer math in omap_mbox_get() is not quite right, and leads to passing NULL to strcmp() when searching for an mbox that is not first in the list. Convert to using array indexing as is done in all the other functions which walk the mbox list. Tested on OMAP2420/n810, OMAP3630/zoom3, OMAP4430/Blaze Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/mailbox.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c index 459b319a9fa..49d3208793e 100644 --- a/arch/arm/plat-omap/mailbox.c +++ b/arch/arm/plat-omap/mailbox.c @@ -322,15 +322,18 @@ static void omap_mbox_fini(struct omap_mbox *mbox) struct omap_mbox *omap_mbox_get(const char *name, struct notifier_block *nb) { - struct omap_mbox *mbox; - int ret; + struct omap_mbox *_mbox, *mbox = NULL; + int i, ret; if (!mboxes) return ERR_PTR(-EINVAL); - for (mbox = *mboxes; mbox; mbox++) - if (!strcmp(mbox->name, name)) + for (i = 0; (_mbox = mboxes[i]); i++) { + if (!strcmp(_mbox->name, name)) { + mbox = _mbox; break; + } + } if (!mbox) return ERR_PTR(-ENOENT); -- cgit v1.2.3-18-g5258 From 24f6173c44a3f921f4fc4b8afc1e3980cbba6528 Mon Sep 17 00:00:00 2001 From: Stepan Moskovchenko Date: Fri, 11 Feb 2011 12:28:16 -0800 Subject: msm: iommu: Create a Kconfig item for the IOMMU driver Break the IOMMU driver out as a Kconfig item. Initially it was decided to always build this in for 8x60, but this driver is not strictly necessary and should be optionally selectable. Signed-off-by: Stepan Moskovchenko Signed-off-by: David Brown --- arch/arm/mach-msm/Kconfig | 13 ++++++++++++- arch/arm/mach-msm/Makefile | 3 ++- 2 files changed, 14 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index df9d74eaa47..32b9d1f8493 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -45,7 +45,6 @@ config ARCH_MSM8X60 select CPU_V7 select MSM_V2_TLMM select MSM_GPIOMUX - select IOMMU_API select MSM_SCM if SMP config ARCH_MSM8960 @@ -149,6 +148,18 @@ config MACH_MSM8960_RUMI3 endmenu +config MSM_IOMMU + bool "MSM IOMMU Support" + depends on ARCH_MSM8X60 + select IOMMU_API + default n + help + Support for the IOMMUs found on certain Qualcomm SOCs. + These IOMMUs allow virtualization of the address space used by most + cores within the multimedia subsystem. + + If unsure, say N here. + config IOMMU_PGTABLES_L2 def_bool y depends on ARCH_MSM8X60 && MMU && SMP && CPU_DCACHE_DISABLE=n diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index ea8c74f56ea..81f4811a7f1 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -4,11 +4,12 @@ obj-$(CONFIG_DEBUG_FS) += clock-debug.o endif obj-$(CONFIG_MSM_VIC) += irq-vic.o +obj-$(CONFIG_MSM_IOMMU) += iommu.o iommu_dev.o obj-$(CONFIG_ARCH_MSM7X00A) += dma.o irq.o acpuclock-arm11.o obj-$(CONFIG_ARCH_MSM7X30) += dma.o obj-$(CONFIG_ARCH_QSD8X50) += dma.o sirc.o -obj-$(CONFIG_ARCH_MSM8X60) += clock-dummy.o iommu.o iommu_dev.o devices-msm8x60-iommu.o +obj-$(CONFIG_ARCH_MSM8X60) += clock-dummy.o devices-msm8x60-iommu.o obj-$(CONFIG_ARCH_MSM8960) += clock-dummy.o obj-$(CONFIG_MSM_PROC_COMM) += proc_comm.o clock-pcom.o vreg.o -- cgit v1.2.3-18-g5258 From 69e213637538e749f6d22d2f426bcafa39eb5261 Mon Sep 17 00:00:00 2001 From: Stepan Moskovchenko Date: Fri, 11 Feb 2011 12:28:17 -0800 Subject: msm: iommu: Generalize platform data for multiple targets Make the IOMMU platform data target-independent in preparation for adding MSM8960 IOMMU support. The IOMMU configuration on MSM8x60 and MSM8960 is identical and the same platform data can be used for both. Signed-off-by: Stepan Moskovchenko Signed-off-by: David Brown --- arch/arm/mach-msm/Makefile | 4 +- arch/arm/mach-msm/devices-iommu.c | 904 +++++++++++++++++++++++ arch/arm/mach-msm/devices-msm8x60-iommu.c | 906 ------------------------ arch/arm/mach-msm/include/mach/msm_iomap-8x60.h | 36 - 4 files changed, 906 insertions(+), 944 deletions(-) create mode 100644 arch/arm/mach-msm/devices-iommu.c delete mode 100644 arch/arm/mach-msm/devices-msm8x60-iommu.c (limited to 'arch') diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index 81f4811a7f1..2099c979fe2 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -4,12 +4,12 @@ obj-$(CONFIG_DEBUG_FS) += clock-debug.o endif obj-$(CONFIG_MSM_VIC) += irq-vic.o -obj-$(CONFIG_MSM_IOMMU) += iommu.o iommu_dev.o +obj-$(CONFIG_MSM_IOMMU) += iommu.o iommu_dev.o devices-iommu.o obj-$(CONFIG_ARCH_MSM7X00A) += dma.o irq.o acpuclock-arm11.o obj-$(CONFIG_ARCH_MSM7X30) += dma.o obj-$(CONFIG_ARCH_QSD8X50) += dma.o sirc.o -obj-$(CONFIG_ARCH_MSM8X60) += clock-dummy.o devices-msm8x60-iommu.o +obj-$(CONFIG_ARCH_MSM8X60) += clock-dummy.o obj-$(CONFIG_ARCH_MSM8960) += clock-dummy.o obj-$(CONFIG_MSM_PROC_COMM) += proc_comm.o clock-pcom.o vreg.o diff --git a/arch/arm/mach-msm/devices-iommu.c b/arch/arm/mach-msm/devices-iommu.c new file mode 100644 index 00000000000..c0206b72750 --- /dev/null +++ b/arch/arm/mach-msm/devices-iommu.c @@ -0,0 +1,904 @@ +/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#include +#include +#include +#include +#include + +static struct resource msm_iommu_jpegd_resources[] = { + { + .start = 0x07300000, + .end = 0x07300000 + SZ_1M - 1, + .name = "physbase", + .flags = IORESOURCE_MEM, + }, + { + .name = "nonsecure_irq", + .start = SMMU_JPEGD_CB_SC_NON_SECURE_IRQ, + .end = SMMU_JPEGD_CB_SC_NON_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, + { + .name = "secure_irq", + .start = SMMU_JPEGD_CB_SC_SECURE_IRQ, + .end = SMMU_JPEGD_CB_SC_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource msm_iommu_vpe_resources[] = { + { + .start = 0x07400000, + .end = 0x07400000 + SZ_1M - 1, + .name = "physbase", + .flags = IORESOURCE_MEM, + }, + { + .name = "nonsecure_irq", + .start = SMMU_VPE_CB_SC_NON_SECURE_IRQ, + .end = SMMU_VPE_CB_SC_NON_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, + { + .name = "secure_irq", + .start = SMMU_VPE_CB_SC_SECURE_IRQ, + .end = SMMU_VPE_CB_SC_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource msm_iommu_mdp0_resources[] = { + { + .start = 0x07500000, + .end = 0x07500000 + SZ_1M - 1, + .name = "physbase", + .flags = IORESOURCE_MEM, + }, + { + .name = "nonsecure_irq", + .start = SMMU_MDP0_CB_SC_NON_SECURE_IRQ, + .end = SMMU_MDP0_CB_SC_NON_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, + { + .name = "secure_irq", + .start = SMMU_MDP0_CB_SC_SECURE_IRQ, + .end = SMMU_MDP0_CB_SC_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource msm_iommu_mdp1_resources[] = { + { + .start = 0x07600000, + .end = 0x07600000 + SZ_1M - 1, + .name = "physbase", + .flags = IORESOURCE_MEM, + }, + { + .name = "nonsecure_irq", + .start = SMMU_MDP1_CB_SC_NON_SECURE_IRQ, + .end = SMMU_MDP1_CB_SC_NON_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, + { + .name = "secure_irq", + .start = SMMU_MDP1_CB_SC_SECURE_IRQ, + .end = SMMU_MDP1_CB_SC_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource msm_iommu_rot_resources[] = { + { + .start = 0x07700000, + .end = 0x07700000 + SZ_1M - 1, + .name = "physbase", + .flags = IORESOURCE_MEM, + }, + { + .name = "nonsecure_irq", + .start = SMMU_ROT_CB_SC_NON_SECURE_IRQ, + .end = SMMU_ROT_CB_SC_NON_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, + { + .name = "secure_irq", + .start = SMMU_ROT_CB_SC_SECURE_IRQ, + .end = SMMU_ROT_CB_SC_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource msm_iommu_ijpeg_resources[] = { + { + .start = 0x07800000, + .end = 0x07800000 + SZ_1M - 1, + .name = "physbase", + .flags = IORESOURCE_MEM, + }, + { + .name = "nonsecure_irq", + .start = SMMU_IJPEG_CB_SC_NON_SECURE_IRQ, + .end = SMMU_IJPEG_CB_SC_NON_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, + { + .name = "secure_irq", + .start = SMMU_IJPEG_CB_SC_SECURE_IRQ, + .end = SMMU_IJPEG_CB_SC_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource msm_iommu_vfe_resources[] = { + { + .start = 0x07900000, + .end = 0x07900000 + SZ_1M - 1, + .name = "physbase", + .flags = IORESOURCE_MEM, + }, + { + .name = "nonsecure_irq", + .start = SMMU_VFE_CB_SC_NON_SECURE_IRQ, + .end = SMMU_VFE_CB_SC_NON_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, + { + .name = "secure_irq", + .start = SMMU_VFE_CB_SC_SECURE_IRQ, + .end = SMMU_VFE_CB_SC_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource msm_iommu_vcodec_a_resources[] = { + { + .start = 0x07A00000, + .end = 0x07A00000 + SZ_1M - 1, + .name = "physbase", + .flags = IORESOURCE_MEM, + }, + { + .name = "nonsecure_irq", + .start = SMMU_VCODEC_A_CB_SC_NON_SECURE_IRQ, + .end = SMMU_VCODEC_A_CB_SC_NON_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, + { + .name = "secure_irq", + .start = SMMU_VCODEC_A_CB_SC_SECURE_IRQ, + .end = SMMU_VCODEC_A_CB_SC_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource msm_iommu_vcodec_b_resources[] = { + { + .start = 0x07B00000, + .end = 0x07B00000 + SZ_1M - 1, + .name = "physbase", + .flags = IORESOURCE_MEM, + }, + { + .name = "nonsecure_irq", + .start = SMMU_VCODEC_B_CB_SC_NON_SECURE_IRQ, + .end = SMMU_VCODEC_B_CB_SC_NON_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, + { + .name = "secure_irq", + .start = SMMU_VCODEC_B_CB_SC_SECURE_IRQ, + .end = SMMU_VCODEC_B_CB_SC_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource msm_iommu_gfx3d_resources[] = { + { + .start = 0x07C00000, + .end = 0x07C00000 + SZ_1M - 1, + .name = "physbase", + .flags = IORESOURCE_MEM, + }, + { + .name = "nonsecure_irq", + .start = SMMU_GFX3D_CB_SC_NON_SECURE_IRQ, + .end = SMMU_GFX3D_CB_SC_NON_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, + { + .name = "secure_irq", + .start = SMMU_GFX3D_CB_SC_SECURE_IRQ, + .end = SMMU_GFX3D_CB_SC_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource msm_iommu_gfx2d0_resources[] = { + { + .start = 0x07D00000, + .end = 0x07D00000 + SZ_1M - 1, + .name = "physbase", + .flags = IORESOURCE_MEM, + }, + { + .name = "nonsecure_irq", + .start = SMMU_GFX2D0_CB_SC_NON_SECURE_IRQ, + .end = SMMU_GFX2D0_CB_SC_NON_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, + { + .name = "secure_irq", + .start = SMMU_GFX2D0_CB_SC_SECURE_IRQ, + .end = SMMU_GFX2D0_CB_SC_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource msm_iommu_gfx2d1_resources[] = { + { + .start = 0x07E00000, + .end = 0x07E00000 + SZ_1M - 1, + .name = "physbase", + .flags = IORESOURCE_MEM, + }, + { + .name = "nonsecure_irq", + .start = SMMU_GFX2D1_CB_SC_NON_SECURE_IRQ, + .end = SMMU_GFX2D1_CB_SC_NON_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, + { + .name = "secure_irq", + .start = SMMU_GFX2D1_CB_SC_SECURE_IRQ, + .end = SMMU_GFX2D1_CB_SC_SECURE_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device msm_root_iommu_dev = { + .name = "msm_iommu", + .id = -1, +}; + +static struct msm_iommu_dev jpegd_iommu = { + .name = "jpegd", + .clk_rate = -1 +}; + +static struct msm_iommu_dev vpe_iommu = { + .name = "vpe" +}; + +static struct msm_iommu_dev mdp0_iommu = { + .name = "mdp0" +}; + +static struct msm_iommu_dev mdp1_iommu = { + .name = "mdp1" +}; + +static struct msm_iommu_dev rot_iommu = { + .name = "rot" +}; + +static struct msm_iommu_dev ijpeg_iommu = { + .name = "ijpeg" +}; + +static struct msm_iommu_dev vfe_iommu = { + .name = "vfe", + .clk_rate = -1 +}; + +static struct msm_iommu_dev vcodec_a_iommu = { + .name = "vcodec_a" +}; + +static struct msm_iommu_dev vcodec_b_iommu = { + .name = "vcodec_b" +}; + +static struct msm_iommu_dev gfx3d_iommu = { + .name = "gfx3d", + .clk_rate = 27000000 +}; + +static struct msm_iommu_dev gfx2d0_iommu = { + .name = "gfx2d0", + .clk_rate = 27000000 +}; + +static struct msm_iommu_dev gfx2d1_iommu = { + .name = "gfx2d1", + .clk_rate = 27000000 +}; + +static struct platform_device msm_device_iommu_jpegd = { + .name = "msm_iommu", + .id = 0, + .dev = { + .parent = &msm_root_iommu_dev.dev, + }, + .num_resources = ARRAY_SIZE(msm_iommu_jpegd_resources), + .resource = msm_iommu_jpegd_resources, +}; + +static struct platform_device msm_device_iommu_vpe = { + .name = "msm_iommu", + .id = 1, + .dev = { + .parent = &msm_root_iommu_dev.dev, + }, + .num_resources = ARRAY_SIZE(msm_iommu_vpe_resources), + .resource = msm_iommu_vpe_resources, +}; + +static struct platform_device msm_device_iommu_mdp0 = { + .name = "msm_iommu", + .id = 2, + .dev = { + .parent = &msm_root_iommu_dev.dev, + }, + .num_resources = ARRAY_SIZE(msm_iommu_mdp0_resources), + .resource = msm_iommu_mdp0_resources, +}; + +static struct platform_device msm_device_iommu_mdp1 = { + .name = "msm_iommu", + .id = 3, + .dev = { + .parent = &msm_root_iommu_dev.dev, + }, + .num_resources = ARRAY_SIZE(msm_iommu_mdp1_resources), + .resource = msm_iommu_mdp1_resources, +}; + +static struct platform_device msm_device_iommu_rot = { + .name = "msm_iommu", + .id = 4, + .dev = { + .parent = &msm_root_iommu_dev.dev, + }, + .num_resources = ARRAY_SIZE(msm_iommu_rot_resources), + .resource = msm_iommu_rot_resources, +}; + +static struct platform_device msm_device_iommu_ijpeg = { + .name = "msm_iommu", + .id = 5, + .dev = { + .parent = &msm_root_iommu_dev.dev, + }, + .num_resources = ARRAY_SIZE(msm_iommu_ijpeg_resources), + .resource = msm_iommu_ijpeg_resources, +}; + +static struct platform_device msm_device_iommu_vfe = { + .name = "msm_iommu", + .id = 6, + .dev = { + .parent = &msm_root_iommu_dev.dev, + }, + .num_resources = ARRAY_SIZE(msm_iommu_vfe_resources), + .resource = msm_iommu_vfe_resources, +}; + +static struct platform_device msm_device_iommu_vcodec_a = { + .name = "msm_iommu", + .id = 7, + .dev = { + .parent = &msm_root_iommu_dev.dev, + }, + .num_resources = ARRAY_SIZE(msm_iommu_vcodec_a_resources), + .resource = msm_iommu_vcodec_a_resources, +}; + +static struct platform_device msm_device_iommu_vcodec_b = { + .name = "msm_iommu", + .id = 8, + .dev = { + .parent = &msm_root_iommu_dev.dev, + }, + .num_resources = ARRAY_SIZE(msm_iommu_vcodec_b_resources), + .resource = msm_iommu_vcodec_b_resources, +}; + +static struct platform_device msm_device_iommu_gfx3d = { + .name = "msm_iommu", + .id = 9, + .dev = { + .parent = &msm_root_iommu_dev.dev, + }, + .num_resources = ARRAY_SIZE(msm_iommu_gfx3d_resources), + .resource = msm_iommu_gfx3d_resources, +}; + +static struct platform_device msm_device_iommu_gfx2d0 = { + .name = "msm_iommu", + .id = 10, + .dev = { + .parent = &msm_root_iommu_dev.dev, + }, + .num_resources = ARRAY_SIZE(msm_iommu_gfx2d0_resources), + .resource = msm_iommu_gfx2d0_resources, +}; + +struct platform_device msm_device_iommu_gfx2d1 = { + .name = "msm_iommu", + .id = 11, + .dev = { + .parent = &msm_root_iommu_dev.dev, + }, + .num_resources = ARRAY_SIZE(msm_iommu_gfx2d1_resources), + .resource = msm_iommu_gfx2d1_resources, +}; + +static struct msm_iommu_ctx_dev jpegd_src_ctx = { + .name = "jpegd_src", + .num = 0, + .mids = {0, -1} +}; + +static struct msm_iommu_ctx_dev jpegd_dst_ctx = { + .name = "jpegd_dst", + .num = 1, + .mids = {1, -1} +}; + +static struct msm_iommu_ctx_dev vpe_src_ctx = { + .name = "vpe_src", + .num = 0, + .mids = {0, -1} +}; + +static struct msm_iommu_ctx_dev vpe_dst_ctx = { + .name = "vpe_dst", + .num = 1, + .mids = {1, -1} +}; + +static struct msm_iommu_ctx_dev mdp_vg1_ctx = { + .name = "mdp_vg1", + .num = 0, + .mids = {0, 2, -1} +}; + +static struct msm_iommu_ctx_dev mdp_rgb1_ctx = { + .name = "mdp_rgb1", + .num = 1, + .mids = {1, 3, 4, 5, 6, 7, 8, 9, 10, -1} +}; + +static struct msm_iommu_ctx_dev mdp_vg2_ctx = { + .name = "mdp_vg2", + .num = 0, + .mids = {0, 2, -1} +}; + +static struct msm_iommu_ctx_dev mdp_rgb2_ctx = { + .name = "mdp_rgb2", + .num = 1, + .mids = {1, 3, 4, 5, 6, 7, 8, 9, 10, -1} +}; + +static struct msm_iommu_ctx_dev rot_src_ctx = { + .name = "rot_src", + .num = 0, + .mids = {0, -1} +}; + +static struct msm_iommu_ctx_dev rot_dst_ctx = { + .name = "rot_dst", + .num = 1, + .mids = {1, -1} +}; + +static struct msm_iommu_ctx_dev ijpeg_src_ctx = { + .name = "ijpeg_src", + .num = 0, + .mids = {0, -1} +}; + +static struct msm_iommu_ctx_dev ijpeg_dst_ctx = { + .name = "ijpeg_dst", + .num = 1, + .mids = {1, -1} +}; + +static struct msm_iommu_ctx_dev vfe_imgwr_ctx = { + .name = "vfe_imgwr", + .num = 0, + .mids = {2, 3, 4, 5, 6, 7, 8, -1} +}; + +static struct msm_iommu_ctx_dev vfe_misc_ctx = { + .name = "vfe_misc", + .num = 1, + .mids = {0, 1, 9, -1} +}; + +static struct msm_iommu_ctx_dev vcodec_a_stream_ctx = { + .name = "vcodec_a_stream", + .num = 0, + .mids = {2, 5, -1} +}; + +static struct msm_iommu_ctx_dev vcodec_a_mm1_ctx = { + .name = "vcodec_a_mm1", + .num = 1, + .mids = {0, 1, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, -1} +}; + +static struct msm_iommu_ctx_dev vcodec_b_mm2_ctx = { + .name = "vcodec_b_mm2", + .num = 0, + .mids = {0, 1, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, -1} +}; + +static struct msm_iommu_ctx_dev gfx3d_user_ctx = { + .name = "gfx3d_user", + .num = 0, + .mids = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, -1} +}; + +static struct msm_iommu_ctx_dev gfx3d_priv_ctx = { + .name = "gfx3d_priv", + .num = 1, + .mids = {16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, + 31, -1} +}; + +static struct msm_iommu_ctx_dev gfx2d0_2d0_ctx = { + .name = "gfx2d0_2d0", + .num = 0, + .mids = {0, 1, 2, 3, 4, 5, 6, 7, -1} +}; + +static struct msm_iommu_ctx_dev gfx2d1_2d1_ctx = { + .name = "gfx2d1_2d1", + .num = 0, + .mids = {0, 1, 2, 3, 4, 5, 6, 7, -1} +}; + +static struct platform_device msm_device_jpegd_src_ctx = { + .name = "msm_iommu_ctx", + .id = 0, + .dev = { + .parent = &msm_device_iommu_jpegd.dev, + }, +}; + +static struct platform_device msm_device_jpegd_dst_ctx = { + .name = "msm_iommu_ctx", + .id = 1, + .dev = { + .parent = &msm_device_iommu_jpegd.dev, + }, +}; + +static struct platform_device msm_device_vpe_src_ctx = { + .name = "msm_iommu_ctx", + .id = 2, + .dev = { + .parent = &msm_device_iommu_vpe.dev, + }, +}; + +static struct platform_device msm_device_vpe_dst_ctx = { + .name = "msm_iommu_ctx", + .id = 3, + .dev = { + .parent = &msm_device_iommu_vpe.dev, + }, +}; + +static struct platform_device msm_device_mdp_vg1_ctx = { + .name = "msm_iommu_ctx", + .id = 4, + .dev = { + .parent = &msm_device_iommu_mdp0.dev, + }, +}; + +static struct platform_device msm_device_mdp_rgb1_ctx = { + .name = "msm_iommu_ctx", + .id = 5, + .dev = { + .parent = &msm_device_iommu_mdp0.dev, + }, +}; + +static struct platform_device msm_device_mdp_vg2_ctx = { + .name = "msm_iommu_ctx", + .id = 6, + .dev = { + .parent = &msm_device_iommu_mdp1.dev, + }, +}; + +static struct platform_device msm_device_mdp_rgb2_ctx = { + .name = "msm_iommu_ctx", + .id = 7, + .dev = { + .parent = &msm_device_iommu_mdp1.dev, + }, +}; + +static struct platform_device msm_device_rot_src_ctx = { + .name = "msm_iommu_ctx", + .id = 8, + .dev = { + .parent = &msm_device_iommu_rot.dev, + }, +}; + +static struct platform_device msm_device_rot_dst_ctx = { + .name = "msm_iommu_ctx", + .id = 9, + .dev = { + .parent = &msm_device_iommu_rot.dev, + }, +}; + +static struct platform_device msm_device_ijpeg_src_ctx = { + .name = "msm_iommu_ctx", + .id = 10, + .dev = { + .parent = &msm_device_iommu_ijpeg.dev, + }, +}; + +static struct platform_device msm_device_ijpeg_dst_ctx = { + .name = "msm_iommu_ctx", + .id = 11, + .dev = { + .parent = &msm_device_iommu_ijpeg.dev, + }, +}; + +static struct platform_device msm_device_vfe_imgwr_ctx = { + .name = "msm_iommu_ctx", + .id = 12, + .dev = { + .parent = &msm_device_iommu_vfe.dev, + }, +}; + +static struct platform_device msm_device_vfe_misc_ctx = { + .name = "msm_iommu_ctx", + .id = 13, + .dev = { + .parent = &msm_device_iommu_vfe.dev, + }, +}; + +static struct platform_device msm_device_vcodec_a_stream_ctx = { + .name = "msm_iommu_ctx", + .id = 14, + .dev = { + .parent = &msm_device_iommu_vcodec_a.dev, + }, +}; + +static struct platform_device msm_device_vcodec_a_mm1_ctx = { + .name = "msm_iommu_ctx", + .id = 15, + .dev = { + .parent = &msm_device_iommu_vcodec_a.dev, + }, +}; + +static struct platform_device msm_device_vcodec_b_mm2_ctx = { + .name = "msm_iommu_ctx", + .id = 16, + .dev = { + .parent = &msm_device_iommu_vcodec_b.dev, + }, +}; + +static struct platform_device msm_device_gfx3d_user_ctx = { + .name = "msm_iommu_ctx", + .id = 17, + .dev = { + .parent = &msm_device_iommu_gfx3d.dev, + }, +}; + +static struct platform_device msm_device_gfx3d_priv_ctx = { + .name = "msm_iommu_ctx", + .id = 18, + .dev = { + .parent = &msm_device_iommu_gfx3d.dev, + }, +}; + +static struct platform_device msm_device_gfx2d0_2d0_ctx = { + .name = "msm_iommu_ctx", + .id = 19, + .dev = { + .parent = &msm_device_iommu_gfx2d0.dev, + }, +}; + +static struct platform_device msm_device_gfx2d1_2d1_ctx = { + .name = "msm_iommu_ctx", + .id = 20, + .dev = { + .parent = &msm_device_iommu_gfx2d1.dev, + }, +}; + +static struct platform_device *msm_iommu_devs[] = { + &msm_device_iommu_jpegd, + &msm_device_iommu_vpe, + &msm_device_iommu_mdp0, + &msm_device_iommu_mdp1, + &msm_device_iommu_rot, + &msm_device_iommu_ijpeg, + &msm_device_iommu_vfe, + &msm_device_iommu_vcodec_a, + &msm_device_iommu_vcodec_b, + &msm_device_iommu_gfx3d, + &msm_device_iommu_gfx2d0, + &msm_device_iommu_gfx2d1, +}; + +static struct msm_iommu_dev *msm_iommu_data[] = { + &jpegd_iommu, + &vpe_iommu, + &mdp0_iommu, + &mdp1_iommu, + &rot_iommu, + &ijpeg_iommu, + &vfe_iommu, + &vcodec_a_iommu, + &vcodec_b_iommu, + &gfx3d_iommu, + &gfx2d0_iommu, + &gfx2d1_iommu, +}; + +static struct platform_device *msm_iommu_ctx_devs[] = { + &msm_device_jpegd_src_ctx, + &msm_device_jpegd_dst_ctx, + &msm_device_vpe_src_ctx, + &msm_device_vpe_dst_ctx, + &msm_device_mdp_vg1_ctx, + &msm_device_mdp_rgb1_ctx, + &msm_device_mdp_vg2_ctx, + &msm_device_mdp_rgb2_ctx, + &msm_device_rot_src_ctx, + &msm_device_rot_dst_ctx, + &msm_device_ijpeg_src_ctx, + &msm_device_ijpeg_dst_ctx, + &msm_device_vfe_imgwr_ctx, + &msm_device_vfe_misc_ctx, + &msm_device_vcodec_a_stream_ctx, + &msm_device_vcodec_a_mm1_ctx, + &msm_device_vcodec_b_mm2_ctx, + &msm_device_gfx3d_user_ctx, + &msm_device_gfx3d_priv_ctx, + &msm_device_gfx2d0_2d0_ctx, + &msm_device_gfx2d1_2d1_ctx, +}; + +static struct msm_iommu_ctx_dev *msm_iommu_ctx_data[] = { + &jpegd_src_ctx, + &jpegd_dst_ctx, + &vpe_src_ctx, + &vpe_dst_ctx, + &mdp_vg1_ctx, + &mdp_rgb1_ctx, + &mdp_vg2_ctx, + &mdp_rgb2_ctx, + &rot_src_ctx, + &rot_dst_ctx, + &ijpeg_src_ctx, + &ijpeg_dst_ctx, + &vfe_imgwr_ctx, + &vfe_misc_ctx, + &vcodec_a_stream_ctx, + &vcodec_a_mm1_ctx, + &vcodec_b_mm2_ctx, + &gfx3d_user_ctx, + &gfx3d_priv_ctx, + &gfx2d0_2d0_ctx, + &gfx2d1_2d1_ctx, +}; + +static int __init msm8x60_iommu_init(void) +{ + int ret, i; + + ret = platform_device_register(&msm_root_iommu_dev); + if (ret != 0) { + pr_err("Failed to register root IOMMU device!\n"); + goto failure; + } + + for (i = 0; i < ARRAY_SIZE(msm_iommu_devs); i++) { + ret = platform_device_add_data(msm_iommu_devs[i], + msm_iommu_data[i], + sizeof(struct msm_iommu_dev)); + if (ret != 0) { + pr_err("platform_device_add_data failed, " + "i = %d\n", i); + goto failure_unwind; + } + + ret = platform_device_register(msm_iommu_devs[i]); + + if (ret != 0) { + pr_err("platform_device_register iommu failed, " + "i = %d\n", i); + goto failure_unwind; + } + } + + for (i = 0; i < ARRAY_SIZE(msm_iommu_ctx_devs); i++) { + ret = platform_device_add_data(msm_iommu_ctx_devs[i], + msm_iommu_ctx_data[i], + sizeof(*msm_iommu_ctx_devs[i])); + if (ret != 0) { + pr_err("platform_device_add_data iommu failed, " + "i = %d\n", i); + goto failure_unwind2; + } + + ret = platform_device_register(msm_iommu_ctx_devs[i]); + if (ret != 0) { + pr_err("platform_device_register ctx failed, " + "i = %d\n", i); + goto failure_unwind2; + } + } + return 0; + +failure_unwind2: + while (--i >= 0) + platform_device_unregister(msm_iommu_ctx_devs[i]); +failure_unwind: + while (--i >= 0) + platform_device_unregister(msm_iommu_devs[i]); + + platform_device_unregister(&msm_root_iommu_dev); +failure: + return ret; +} + +static void __exit msm8x60_iommu_exit(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(msm_iommu_ctx_devs); i++) + platform_device_unregister(msm_iommu_ctx_devs[i]); + + for (i = 0; i < ARRAY_SIZE(msm_iommu_devs); ++i) + platform_device_unregister(msm_iommu_devs[i]); + + platform_device_unregister(&msm_root_iommu_dev); +} + +subsys_initcall(msm8x60_iommu_init); +module_exit(msm8x60_iommu_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Stepan Moskovchenko "); diff --git a/arch/arm/mach-msm/devices-msm8x60-iommu.c b/arch/arm/mach-msm/devices-msm8x60-iommu.c deleted file mode 100644 index f9e7bd34ec5..00000000000 --- a/arch/arm/mach-msm/devices-msm8x60-iommu.c +++ /dev/null @@ -1,906 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - -#include -#include -#include - -#include -#include -#include - -static struct resource msm_iommu_jpegd_resources[] = { - { - .start = MSM_IOMMU_JPEGD_PHYS, - .end = MSM_IOMMU_JPEGD_PHYS + MSM_IOMMU_JPEGD_SIZE - 1, - .name = "physbase", - .flags = IORESOURCE_MEM, - }, - { - .name = "nonsecure_irq", - .start = SMMU_JPEGD_CB_SC_NON_SECURE_IRQ, - .end = SMMU_JPEGD_CB_SC_NON_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, - { - .name = "secure_irq", - .start = SMMU_JPEGD_CB_SC_SECURE_IRQ, - .end = SMMU_JPEGD_CB_SC_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource msm_iommu_vpe_resources[] = { - { - .start = MSM_IOMMU_VPE_PHYS, - .end = MSM_IOMMU_VPE_PHYS + MSM_IOMMU_VPE_SIZE - 1, - .name = "physbase", - .flags = IORESOURCE_MEM, - }, - { - .name = "nonsecure_irq", - .start = SMMU_VPE_CB_SC_NON_SECURE_IRQ, - .end = SMMU_VPE_CB_SC_NON_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, - { - .name = "secure_irq", - .start = SMMU_VPE_CB_SC_SECURE_IRQ, - .end = SMMU_VPE_CB_SC_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource msm_iommu_mdp0_resources[] = { - { - .start = MSM_IOMMU_MDP0_PHYS, - .end = MSM_IOMMU_MDP0_PHYS + MSM_IOMMU_MDP0_SIZE - 1, - .name = "physbase", - .flags = IORESOURCE_MEM, - }, - { - .name = "nonsecure_irq", - .start = SMMU_MDP0_CB_SC_NON_SECURE_IRQ, - .end = SMMU_MDP0_CB_SC_NON_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, - { - .name = "secure_irq", - .start = SMMU_MDP0_CB_SC_SECURE_IRQ, - .end = SMMU_MDP0_CB_SC_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource msm_iommu_mdp1_resources[] = { - { - .start = MSM_IOMMU_MDP1_PHYS, - .end = MSM_IOMMU_MDP1_PHYS + MSM_IOMMU_MDP1_SIZE - 1, - .name = "physbase", - .flags = IORESOURCE_MEM, - }, - { - .name = "nonsecure_irq", - .start = SMMU_MDP1_CB_SC_NON_SECURE_IRQ, - .end = SMMU_MDP1_CB_SC_NON_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, - { - .name = "secure_irq", - .start = SMMU_MDP1_CB_SC_SECURE_IRQ, - .end = SMMU_MDP1_CB_SC_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource msm_iommu_rot_resources[] = { - { - .start = MSM_IOMMU_ROT_PHYS, - .end = MSM_IOMMU_ROT_PHYS + MSM_IOMMU_ROT_SIZE - 1, - .name = "physbase", - .flags = IORESOURCE_MEM, - }, - { - .name = "nonsecure_irq", - .start = SMMU_ROT_CB_SC_NON_SECURE_IRQ, - .end = SMMU_ROT_CB_SC_NON_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, - { - .name = "secure_irq", - .start = SMMU_ROT_CB_SC_SECURE_IRQ, - .end = SMMU_ROT_CB_SC_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource msm_iommu_ijpeg_resources[] = { - { - .start = MSM_IOMMU_IJPEG_PHYS, - .end = MSM_IOMMU_IJPEG_PHYS + MSM_IOMMU_IJPEG_SIZE - 1, - .name = "physbase", - .flags = IORESOURCE_MEM, - }, - { - .name = "nonsecure_irq", - .start = SMMU_IJPEG_CB_SC_NON_SECURE_IRQ, - .end = SMMU_IJPEG_CB_SC_NON_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, - { - .name = "secure_irq", - .start = SMMU_IJPEG_CB_SC_SECURE_IRQ, - .end = SMMU_IJPEG_CB_SC_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource msm_iommu_vfe_resources[] = { - { - .start = MSM_IOMMU_VFE_PHYS, - .end = MSM_IOMMU_VFE_PHYS + MSM_IOMMU_VFE_SIZE - 1, - .name = "physbase", - .flags = IORESOURCE_MEM, - }, - { - .name = "nonsecure_irq", - .start = SMMU_VFE_CB_SC_NON_SECURE_IRQ, - .end = SMMU_VFE_CB_SC_NON_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, - { - .name = "secure_irq", - .start = SMMU_VFE_CB_SC_SECURE_IRQ, - .end = SMMU_VFE_CB_SC_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource msm_iommu_vcodec_a_resources[] = { - { - .start = MSM_IOMMU_VCODEC_A_PHYS, - .end = MSM_IOMMU_VCODEC_A_PHYS + MSM_IOMMU_VCODEC_A_SIZE - 1, - .name = "physbase", - .flags = IORESOURCE_MEM, - }, - { - .name = "nonsecure_irq", - .start = SMMU_VCODEC_A_CB_SC_NON_SECURE_IRQ, - .end = SMMU_VCODEC_A_CB_SC_NON_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, - { - .name = "secure_irq", - .start = SMMU_VCODEC_A_CB_SC_SECURE_IRQ, - .end = SMMU_VCODEC_A_CB_SC_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource msm_iommu_vcodec_b_resources[] = { - { - .start = MSM_IOMMU_VCODEC_B_PHYS, - .end = MSM_IOMMU_VCODEC_B_PHYS + MSM_IOMMU_VCODEC_B_SIZE - 1, - .name = "physbase", - .flags = IORESOURCE_MEM, - }, - { - .name = "nonsecure_irq", - .start = SMMU_VCODEC_B_CB_SC_NON_SECURE_IRQ, - .end = SMMU_VCODEC_B_CB_SC_NON_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, - { - .name = "secure_irq", - .start = SMMU_VCODEC_B_CB_SC_SECURE_IRQ, - .end = SMMU_VCODEC_B_CB_SC_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource msm_iommu_gfx3d_resources[] = { - { - .start = MSM_IOMMU_GFX3D_PHYS, - .end = MSM_IOMMU_GFX3D_PHYS + MSM_IOMMU_GFX3D_SIZE - 1, - .name = "physbase", - .flags = IORESOURCE_MEM, - }, - { - .name = "nonsecure_irq", - .start = SMMU_GFX3D_CB_SC_NON_SECURE_IRQ, - .end = SMMU_GFX3D_CB_SC_NON_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, - { - .name = "secure_irq", - .start = SMMU_GFX3D_CB_SC_SECURE_IRQ, - .end = SMMU_GFX3D_CB_SC_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource msm_iommu_gfx2d0_resources[] = { - { - .start = MSM_IOMMU_GFX2D0_PHYS, - .end = MSM_IOMMU_GFX2D0_PHYS + MSM_IOMMU_GFX2D0_SIZE - 1, - .name = "physbase", - .flags = IORESOURCE_MEM, - }, - { - .name = "nonsecure_irq", - .start = SMMU_GFX2D0_CB_SC_NON_SECURE_IRQ, - .end = SMMU_GFX2D0_CB_SC_NON_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, - { - .name = "secure_irq", - .start = SMMU_GFX2D0_CB_SC_SECURE_IRQ, - .end = SMMU_GFX2D0_CB_SC_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource msm_iommu_gfx2d1_resources[] = { - { - .start = MSM_IOMMU_GFX2D1_PHYS, - .end = MSM_IOMMU_GFX2D1_PHYS + MSM_IOMMU_GFX2D1_SIZE - 1, - .name = "physbase", - .flags = IORESOURCE_MEM, - }, - { - .name = "nonsecure_irq", - .start = SMMU_GFX2D1_CB_SC_NON_SECURE_IRQ, - .end = SMMU_GFX2D1_CB_SC_NON_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, - { - .name = "secure_irq", - .start = SMMU_GFX2D1_CB_SC_SECURE_IRQ, - .end = SMMU_GFX2D1_CB_SC_SECURE_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device msm_root_iommu_dev = { - .name = "msm_iommu", - .id = -1, -}; - -static struct msm_iommu_dev jpegd_iommu = { - .name = "jpegd", - .clk_rate = -1 -}; - -static struct msm_iommu_dev vpe_iommu = { - .name = "vpe" -}; - -static struct msm_iommu_dev mdp0_iommu = { - .name = "mdp0" -}; - -static struct msm_iommu_dev mdp1_iommu = { - .name = "mdp1" -}; - -static struct msm_iommu_dev rot_iommu = { - .name = "rot" -}; - -static struct msm_iommu_dev ijpeg_iommu = { - .name = "ijpeg" -}; - -static struct msm_iommu_dev vfe_iommu = { - .name = "vfe", - .clk_rate = -1 -}; - -static struct msm_iommu_dev vcodec_a_iommu = { - .name = "vcodec_a" -}; - -static struct msm_iommu_dev vcodec_b_iommu = { - .name = "vcodec_b" -}; - -static struct msm_iommu_dev gfx3d_iommu = { - .name = "gfx3d", - .clk_rate = 27000000 -}; - -static struct msm_iommu_dev gfx2d0_iommu = { - .name = "gfx2d0", - .clk_rate = 27000000 -}; - -static struct msm_iommu_dev gfx2d1_iommu = { - .name = "gfx2d1", - .clk_rate = 27000000 -}; - -static struct platform_device msm_device_iommu_jpegd = { - .name = "msm_iommu", - .id = 0, - .dev = { - .parent = &msm_root_iommu_dev.dev, - }, - .num_resources = ARRAY_SIZE(msm_iommu_jpegd_resources), - .resource = msm_iommu_jpegd_resources, -}; - -static struct platform_device msm_device_iommu_vpe = { - .name = "msm_iommu", - .id = 1, - .dev = { - .parent = &msm_root_iommu_dev.dev, - }, - .num_resources = ARRAY_SIZE(msm_iommu_vpe_resources), - .resource = msm_iommu_vpe_resources, -}; - -static struct platform_device msm_device_iommu_mdp0 = { - .name = "msm_iommu", - .id = 2, - .dev = { - .parent = &msm_root_iommu_dev.dev, - }, - .num_resources = ARRAY_SIZE(msm_iommu_mdp0_resources), - .resource = msm_iommu_mdp0_resources, -}; - -static struct platform_device msm_device_iommu_mdp1 = { - .name = "msm_iommu", - .id = 3, - .dev = { - .parent = &msm_root_iommu_dev.dev, - }, - .num_resources = ARRAY_SIZE(msm_iommu_mdp1_resources), - .resource = msm_iommu_mdp1_resources, -}; - -static struct platform_device msm_device_iommu_rot = { - .name = "msm_iommu", - .id = 4, - .dev = { - .parent = &msm_root_iommu_dev.dev, - }, - .num_resources = ARRAY_SIZE(msm_iommu_rot_resources), - .resource = msm_iommu_rot_resources, -}; - -static struct platform_device msm_device_iommu_ijpeg = { - .name = "msm_iommu", - .id = 5, - .dev = { - .parent = &msm_root_iommu_dev.dev, - }, - .num_resources = ARRAY_SIZE(msm_iommu_ijpeg_resources), - .resource = msm_iommu_ijpeg_resources, -}; - -static struct platform_device msm_device_iommu_vfe = { - .name = "msm_iommu", - .id = 6, - .dev = { - .parent = &msm_root_iommu_dev.dev, - }, - .num_resources = ARRAY_SIZE(msm_iommu_vfe_resources), - .resource = msm_iommu_vfe_resources, -}; - -static struct platform_device msm_device_iommu_vcodec_a = { - .name = "msm_iommu", - .id = 7, - .dev = { - .parent = &msm_root_iommu_dev.dev, - }, - .num_resources = ARRAY_SIZE(msm_iommu_vcodec_a_resources), - .resource = msm_iommu_vcodec_a_resources, -}; - -static struct platform_device msm_device_iommu_vcodec_b = { - .name = "msm_iommu", - .id = 8, - .dev = { - .parent = &msm_root_iommu_dev.dev, - }, - .num_resources = ARRAY_SIZE(msm_iommu_vcodec_b_resources), - .resource = msm_iommu_vcodec_b_resources, -}; - -static struct platform_device msm_device_iommu_gfx3d = { - .name = "msm_iommu", - .id = 9, - .dev = { - .parent = &msm_root_iommu_dev.dev, - }, - .num_resources = ARRAY_SIZE(msm_iommu_gfx3d_resources), - .resource = msm_iommu_gfx3d_resources, -}; - -static struct platform_device msm_device_iommu_gfx2d0 = { - .name = "msm_iommu", - .id = 10, - .dev = { - .parent = &msm_root_iommu_dev.dev, - }, - .num_resources = ARRAY_SIZE(msm_iommu_gfx2d0_resources), - .resource = msm_iommu_gfx2d0_resources, -}; - -struct platform_device msm_device_iommu_gfx2d1 = { - .name = "msm_iommu", - .id = 11, - .dev = { - .parent = &msm_root_iommu_dev.dev, - }, - .num_resources = ARRAY_SIZE(msm_iommu_gfx2d1_resources), - .resource = msm_iommu_gfx2d1_resources, -}; - -static struct msm_iommu_ctx_dev jpegd_src_ctx = { - .name = "jpegd_src", - .num = 0, - .mids = {0, -1} -}; - -static struct msm_iommu_ctx_dev jpegd_dst_ctx = { - .name = "jpegd_dst", - .num = 1, - .mids = {1, -1} -}; - -static struct msm_iommu_ctx_dev vpe_src_ctx = { - .name = "vpe_src", - .num = 0, - .mids = {0, -1} -}; - -static struct msm_iommu_ctx_dev vpe_dst_ctx = { - .name = "vpe_dst", - .num = 1, - .mids = {1, -1} -}; - -static struct msm_iommu_ctx_dev mdp_vg1_ctx = { - .name = "mdp_vg1", - .num = 0, - .mids = {0, 2, -1} -}; - -static struct msm_iommu_ctx_dev mdp_rgb1_ctx = { - .name = "mdp_rgb1", - .num = 1, - .mids = {1, 3, 4, 5, 6, 7, 8, 9, 10, -1} -}; - -static struct msm_iommu_ctx_dev mdp_vg2_ctx = { - .name = "mdp_vg2", - .num = 0, - .mids = {0, 2, -1} -}; - -static struct msm_iommu_ctx_dev mdp_rgb2_ctx = { - .name = "mdp_rgb2", - .num = 1, - .mids = {1, 3, 4, 5, 6, 7, 8, 9, 10, -1} -}; - -static struct msm_iommu_ctx_dev rot_src_ctx = { - .name = "rot_src", - .num = 0, - .mids = {0, -1} -}; - -static struct msm_iommu_ctx_dev rot_dst_ctx = { - .name = "rot_dst", - .num = 1, - .mids = {1, -1} -}; - -static struct msm_iommu_ctx_dev ijpeg_src_ctx = { - .name = "ijpeg_src", - .num = 0, - .mids = {0, -1} -}; - -static struct msm_iommu_ctx_dev ijpeg_dst_ctx = { - .name = "ijpeg_dst", - .num = 1, - .mids = {1, -1} -}; - -static struct msm_iommu_ctx_dev vfe_imgwr_ctx = { - .name = "vfe_imgwr", - .num = 0, - .mids = {2, 3, 4, 5, 6, 7, 8, -1} -}; - -static struct msm_iommu_ctx_dev vfe_misc_ctx = { - .name = "vfe_misc", - .num = 1, - .mids = {0, 1, 9, -1} -}; - -static struct msm_iommu_ctx_dev vcodec_a_stream_ctx = { - .name = "vcodec_a_stream", - .num = 0, - .mids = {2, 5, -1} -}; - -static struct msm_iommu_ctx_dev vcodec_a_mm1_ctx = { - .name = "vcodec_a_mm1", - .num = 1, - .mids = {0, 1, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, -1} -}; - -static struct msm_iommu_ctx_dev vcodec_b_mm2_ctx = { - .name = "vcodec_b_mm2", - .num = 0, - .mids = {0, 1, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, -1} -}; - -static struct msm_iommu_ctx_dev gfx3d_user_ctx = { - .name = "gfx3d_user", - .num = 0, - .mids = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, -1} -}; - -static struct msm_iommu_ctx_dev gfx3d_priv_ctx = { - .name = "gfx3d_priv", - .num = 1, - .mids = {16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, - 31, -1} -}; - -static struct msm_iommu_ctx_dev gfx2d0_2d0_ctx = { - .name = "gfx2d0_2d0", - .num = 0, - .mids = {0, 1, 2, 3, 4, 5, 6, 7, -1} -}; - -static struct msm_iommu_ctx_dev gfx2d1_2d1_ctx = { - .name = "gfx2d1_2d1", - .num = 0, - .mids = {0, 1, 2, 3, 4, 5, 6, 7, -1} -}; - -static struct platform_device msm_device_jpegd_src_ctx = { - .name = "msm_iommu_ctx", - .id = 0, - .dev = { - .parent = &msm_device_iommu_jpegd.dev, - }, -}; - -static struct platform_device msm_device_jpegd_dst_ctx = { - .name = "msm_iommu_ctx", - .id = 1, - .dev = { - .parent = &msm_device_iommu_jpegd.dev, - }, -}; - -static struct platform_device msm_device_vpe_src_ctx = { - .name = "msm_iommu_ctx", - .id = 2, - .dev = { - .parent = &msm_device_iommu_vpe.dev, - }, -}; - -static struct platform_device msm_device_vpe_dst_ctx = { - .name = "msm_iommu_ctx", - .id = 3, - .dev = { - .parent = &msm_device_iommu_vpe.dev, - }, -}; - -static struct platform_device msm_device_mdp_vg1_ctx = { - .name = "msm_iommu_ctx", - .id = 4, - .dev = { - .parent = &msm_device_iommu_mdp0.dev, - }, -}; - -static struct platform_device msm_device_mdp_rgb1_ctx = { - .name = "msm_iommu_ctx", - .id = 5, - .dev = { - .parent = &msm_device_iommu_mdp0.dev, - }, -}; - -static struct platform_device msm_device_mdp_vg2_ctx = { - .name = "msm_iommu_ctx", - .id = 6, - .dev = { - .parent = &msm_device_iommu_mdp1.dev, - }, -}; - -static struct platform_device msm_device_mdp_rgb2_ctx = { - .name = "msm_iommu_ctx", - .id = 7, - .dev = { - .parent = &msm_device_iommu_mdp1.dev, - }, -}; - -static struct platform_device msm_device_rot_src_ctx = { - .name = "msm_iommu_ctx", - .id = 8, - .dev = { - .parent = &msm_device_iommu_rot.dev, - }, -}; - -static struct platform_device msm_device_rot_dst_ctx = { - .name = "msm_iommu_ctx", - .id = 9, - .dev = { - .parent = &msm_device_iommu_rot.dev, - }, -}; - -static struct platform_device msm_device_ijpeg_src_ctx = { - .name = "msm_iommu_ctx", - .id = 10, - .dev = { - .parent = &msm_device_iommu_ijpeg.dev, - }, -}; - -static struct platform_device msm_device_ijpeg_dst_ctx = { - .name = "msm_iommu_ctx", - .id = 11, - .dev = { - .parent = &msm_device_iommu_ijpeg.dev, - }, -}; - -static struct platform_device msm_device_vfe_imgwr_ctx = { - .name = "msm_iommu_ctx", - .id = 12, - .dev = { - .parent = &msm_device_iommu_vfe.dev, - }, -}; - -static struct platform_device msm_device_vfe_misc_ctx = { - .name = "msm_iommu_ctx", - .id = 13, - .dev = { - .parent = &msm_device_iommu_vfe.dev, - }, -}; - -static struct platform_device msm_device_vcodec_a_stream_ctx = { - .name = "msm_iommu_ctx", - .id = 14, - .dev = { - .parent = &msm_device_iommu_vcodec_a.dev, - }, -}; - -static struct platform_device msm_device_vcodec_a_mm1_ctx = { - .name = "msm_iommu_ctx", - .id = 15, - .dev = { - .parent = &msm_device_iommu_vcodec_a.dev, - }, -}; - -static struct platform_device msm_device_vcodec_b_mm2_ctx = { - .name = "msm_iommu_ctx", - .id = 16, - .dev = { - .parent = &msm_device_iommu_vcodec_b.dev, - }, -}; - -static struct platform_device msm_device_gfx3d_user_ctx = { - .name = "msm_iommu_ctx", - .id = 17, - .dev = { - .parent = &msm_device_iommu_gfx3d.dev, - }, -}; - -static struct platform_device msm_device_gfx3d_priv_ctx = { - .name = "msm_iommu_ctx", - .id = 18, - .dev = { - .parent = &msm_device_iommu_gfx3d.dev, - }, -}; - -static struct platform_device msm_device_gfx2d0_2d0_ctx = { - .name = "msm_iommu_ctx", - .id = 19, - .dev = { - .parent = &msm_device_iommu_gfx2d0.dev, - }, -}; - -static struct platform_device msm_device_gfx2d1_2d1_ctx = { - .name = "msm_iommu_ctx", - .id = 20, - .dev = { - .parent = &msm_device_iommu_gfx2d1.dev, - }, -}; - -static struct platform_device *msm_iommu_devs[] = { - &msm_device_iommu_jpegd, - &msm_device_iommu_vpe, - &msm_device_iommu_mdp0, - &msm_device_iommu_mdp1, - &msm_device_iommu_rot, - &msm_device_iommu_ijpeg, - &msm_device_iommu_vfe, - &msm_device_iommu_vcodec_a, - &msm_device_iommu_vcodec_b, - &msm_device_iommu_gfx3d, - &msm_device_iommu_gfx2d0, - &msm_device_iommu_gfx2d1, -}; - -static struct msm_iommu_dev *msm_iommu_data[] = { - &jpegd_iommu, - &vpe_iommu, - &mdp0_iommu, - &mdp1_iommu, - &rot_iommu, - &ijpeg_iommu, - &vfe_iommu, - &vcodec_a_iommu, - &vcodec_b_iommu, - &gfx3d_iommu, - &gfx2d0_iommu, - &gfx2d1_iommu, -}; - -static struct platform_device *msm_iommu_ctx_devs[] = { - &msm_device_jpegd_src_ctx, - &msm_device_jpegd_dst_ctx, - &msm_device_vpe_src_ctx, - &msm_device_vpe_dst_ctx, - &msm_device_mdp_vg1_ctx, - &msm_device_mdp_rgb1_ctx, - &msm_device_mdp_vg2_ctx, - &msm_device_mdp_rgb2_ctx, - &msm_device_rot_src_ctx, - &msm_device_rot_dst_ctx, - &msm_device_ijpeg_src_ctx, - &msm_device_ijpeg_dst_ctx, - &msm_device_vfe_imgwr_ctx, - &msm_device_vfe_misc_ctx, - &msm_device_vcodec_a_stream_ctx, - &msm_device_vcodec_a_mm1_ctx, - &msm_device_vcodec_b_mm2_ctx, - &msm_device_gfx3d_user_ctx, - &msm_device_gfx3d_priv_ctx, - &msm_device_gfx2d0_2d0_ctx, - &msm_device_gfx2d1_2d1_ctx, -}; - -static struct msm_iommu_ctx_dev *msm_iommu_ctx_data[] = { - &jpegd_src_ctx, - &jpegd_dst_ctx, - &vpe_src_ctx, - &vpe_dst_ctx, - &mdp_vg1_ctx, - &mdp_rgb1_ctx, - &mdp_vg2_ctx, - &mdp_rgb2_ctx, - &rot_src_ctx, - &rot_dst_ctx, - &ijpeg_src_ctx, - &ijpeg_dst_ctx, - &vfe_imgwr_ctx, - &vfe_misc_ctx, - &vcodec_a_stream_ctx, - &vcodec_a_mm1_ctx, - &vcodec_b_mm2_ctx, - &gfx3d_user_ctx, - &gfx3d_priv_ctx, - &gfx2d0_2d0_ctx, - &gfx2d1_2d1_ctx, -}; - -static int __init msm8x60_iommu_init(void) -{ - int ret, i; - - ret = platform_device_register(&msm_root_iommu_dev); - if (ret != 0) { - pr_err("Failed to register root IOMMU device!\n"); - goto failure; - } - - for (i = 0; i < ARRAY_SIZE(msm_iommu_devs); i++) { - ret = platform_device_add_data(msm_iommu_devs[i], - msm_iommu_data[i], - sizeof(struct msm_iommu_dev)); - if (ret != 0) { - pr_err("platform_device_add_data failed, " - "i = %d\n", i); - goto failure_unwind; - } - - ret = platform_device_register(msm_iommu_devs[i]); - - if (ret != 0) { - pr_err("platform_device_register iommu failed, " - "i = %d\n", i); - goto failure_unwind; - } - } - - for (i = 0; i < ARRAY_SIZE(msm_iommu_ctx_devs); i++) { - ret = platform_device_add_data(msm_iommu_ctx_devs[i], - msm_iommu_ctx_data[i], - sizeof(*msm_iommu_ctx_devs[i])); - if (ret != 0) { - pr_err("platform_device_add_data iommu failed, " - "i = %d\n", i); - goto failure_unwind2; - } - - ret = platform_device_register(msm_iommu_ctx_devs[i]); - if (ret != 0) { - pr_err("platform_device_register ctx failed, " - "i = %d\n", i); - goto failure_unwind2; - } - } - return 0; - -failure_unwind2: - while (--i >= 0) - platform_device_unregister(msm_iommu_ctx_devs[i]); -failure_unwind: - while (--i >= 0) - platform_device_unregister(msm_iommu_devs[i]); - - platform_device_unregister(&msm_root_iommu_dev); -failure: - return ret; -} - -static void __exit msm8x60_iommu_exit(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(msm_iommu_ctx_devs); i++) - platform_device_unregister(msm_iommu_ctx_devs[i]); - - for (i = 0; i < ARRAY_SIZE(msm_iommu_devs); ++i) - platform_device_unregister(msm_iommu_devs[i]); - - platform_device_unregister(&msm_root_iommu_dev); -} - -subsys_initcall(msm8x60_iommu_init); -module_exit(msm8x60_iommu_exit); - -MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Stepan Moskovchenko "); diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h index 5bd18db11ae..3b19b8f244b 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h @@ -62,40 +62,4 @@ #define MSM8X60_TMR0_PHYS 0x02040000 #define MSM8X60_TMR0_SIZE SZ_4K -#define MSM_IOMMU_JPEGD_PHYS 0x07300000 -#define MSM_IOMMU_JPEGD_SIZE SZ_1M - -#define MSM_IOMMU_VPE_PHYS 0x07400000 -#define MSM_IOMMU_VPE_SIZE SZ_1M - -#define MSM_IOMMU_MDP0_PHYS 0x07500000 -#define MSM_IOMMU_MDP0_SIZE SZ_1M - -#define MSM_IOMMU_MDP1_PHYS 0x07600000 -#define MSM_IOMMU_MDP1_SIZE SZ_1M - -#define MSM_IOMMU_ROT_PHYS 0x07700000 -#define MSM_IOMMU_ROT_SIZE SZ_1M - -#define MSM_IOMMU_IJPEG_PHYS 0x07800000 -#define MSM_IOMMU_IJPEG_SIZE SZ_1M - -#define MSM_IOMMU_VFE_PHYS 0x07900000 -#define MSM_IOMMU_VFE_SIZE SZ_1M - -#define MSM_IOMMU_VCODEC_A_PHYS 0x07A00000 -#define MSM_IOMMU_VCODEC_A_SIZE SZ_1M - -#define MSM_IOMMU_VCODEC_B_PHYS 0x07B00000 -#define MSM_IOMMU_VCODEC_B_SIZE SZ_1M - -#define MSM_IOMMU_GFX3D_PHYS 0x07C00000 -#define MSM_IOMMU_GFX3D_SIZE SZ_1M - -#define MSM_IOMMU_GFX2D0_PHYS 0x07D00000 -#define MSM_IOMMU_GFX2D0_SIZE SZ_1M - -#define MSM_IOMMU_GFX2D1_PHYS 0x07E00000 -#define MSM_IOMMU_GFX2D1_SIZE SZ_1M - #endif -- cgit v1.2.3-18-g5258 From 6499f0a8b3f44141431df79923fb8f1d8017e139 Mon Sep 17 00:00:00 2001 From: Stepan Moskovchenko Date: Fri, 11 Feb 2011 12:28:18 -0800 Subject: msm: iommu: Enable IOMMU support for MSM8960 Allow IOMMU to be selected for MSM8960 now that the platform data has been generalized. Signed-off-by: Stepan Moskovchenko Signed-off-by: David Brown --- arch/arm/mach-msm/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index 32b9d1f8493..997c5bda8c1 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -150,7 +150,7 @@ endmenu config MSM_IOMMU bool "MSM IOMMU Support" - depends on ARCH_MSM8X60 + depends on ARCH_MSM8X60 || ARCH_MSM8960 select IOMMU_API default n help -- cgit v1.2.3-18-g5258 From 37cd4fef6ebfa76acc6ef6de911123739098cff4 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Fri, 4 Feb 2011 09:15:09 +0000 Subject: omap: McBSP: Remove unused audio macros in mcbsp.h Some macros defined in mcbsp.h related to audio, which are never being used is removed. Signed-off-by: Kishon Vijay Abraham I Reviewed-by: Charulatha V Cc: Jarkko Nikula Acked-by: Jarkko Nikula Acked-by: Peter Ujfalusi Acked-by: G, Manjunath Kondaiah Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/mcbsp.h | 14 -------------- 1 file changed, 14 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h index b87d83ccd54..6ecf1051e5f 100644 --- a/arch/arm/plat-omap/include/plat/mcbsp.h +++ b/arch/arm/plat-omap/include/plat/mcbsp.h @@ -106,13 +106,6 @@ static struct platform_device omap_mcbsp##port_nr = { \ #define OMAP_MCBSP_REG_XCCR 0x00 #define OMAP_MCBSP_REG_RCCR 0x00 -#define AUDIO_MCBSP_DATAWRITE (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1) -#define AUDIO_MCBSP_DATAREAD (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DRR1) - -#define AUDIO_MCBSP OMAP_MCBSP1 -#define AUDIO_DMA_TX OMAP_DMA_MCBSP1_TX -#define AUDIO_DMA_RX OMAP_DMA_MCBSP1_RX - #else #define OMAP_MCBSP_REG_DRR2 0x00 @@ -168,13 +161,6 @@ static struct platform_device omap_mcbsp##port_nr = { \ #define OMAP_ST_REG_SFIRCR 0x28 #define OMAP_ST_REG_SSELCR 0x2C -#define AUDIO_MCBSP_DATAWRITE (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DXR1) -#define AUDIO_MCBSP_DATAREAD (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DRR1) - -#define AUDIO_MCBSP OMAP_MCBSP2 -#define AUDIO_DMA_TX OMAP24XX_DMA_MCBSP2_TX -#define AUDIO_DMA_RX OMAP24XX_DMA_MCBSP2_RX - #endif /************************** McBSP SPCR1 bit definitions ***********************/ -- cgit v1.2.3-18-g5258 From 3dc3bad6f1b316d79d9d1d596a590b5097cb3dc4 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 14 Feb 2011 15:40:20 -0800 Subject: ARM: OMAP2: use early init hook Move non-mapping and non-irq initialization code out of .map_io and .init_irq respectively into the new init_early hook. Signed-off-by: Russell King Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-2430sdp.c | 8 ++++---- arch/arm/mach-omap2/board-3430sdp.c | 8 ++++---- arch/arm/mach-omap2/board-3630sdp.c | 8 ++++---- arch/arm/mach-omap2/board-4430sdp.c | 8 ++++---- arch/arm/mach-omap2/board-am3517crane.c | 8 ++++---- arch/arm/mach-omap2/board-am3517evm.c | 8 ++++---- arch/arm/mach-omap2/board-apollon.c | 8 ++++---- arch/arm/mach-omap2/board-cm-t35.c | 8 ++++---- arch/arm/mach-omap2/board-cm-t3517.c | 8 ++++---- arch/arm/mach-omap2/board-devkit8000.c | 9 +++++++-- arch/arm/mach-omap2/board-generic.c | 8 ++++---- arch/arm/mach-omap2/board-h4.c | 9 +++++++-- arch/arm/mach-omap2/board-igep0020.c | 8 ++++---- arch/arm/mach-omap2/board-igep0030.c | 6 +++--- arch/arm/mach-omap2/board-ldp.c | 8 ++++---- arch/arm/mach-omap2/board-n8x0.c | 18 ++++++++++-------- arch/arm/mach-omap2/board-omap3beagle.c | 9 +++++++-- arch/arm/mach-omap2/board-omap3evm.c | 8 ++++---- arch/arm/mach-omap2/board-omap3logic.c | 9 +++++---- arch/arm/mach-omap2/board-omap3pandora.c | 8 ++++---- arch/arm/mach-omap2/board-omap3stalker.c | 7 ++++++- arch/arm/mach-omap2/board-omap3touchbook.c | 9 +++++++-- arch/arm/mach-omap2/board-omap4panda.c | 6 +++--- arch/arm/mach-omap2/board-overo.c | 8 ++++---- arch/arm/mach-omap2/board-rm680.c | 8 ++++---- arch/arm/mach-omap2/board-rx51.c | 8 ++++---- arch/arm/mach-omap2/board-zoom.c | 14 +++++++------- 27 files changed, 130 insertions(+), 102 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index e0661777f59..ec74c0f2051 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -139,13 +139,12 @@ static struct omap_board_config_kernel sdp2430_config[] __initdata = { {OMAP_TAG_LCD, &sdp2430_lcd_config}, }; -static void __init omap_2430sdp_init_irq(void) +static void __init omap_2430sdp_init_early(void) { omap_board_config = sdp2430_config; omap_board_config_size = ARRAY_SIZE(sdp2430_config); omap2_init_common_infrastructure(); omap2_init_common_devices(NULL, NULL); - omap_init_irq(); } static struct twl4030_gpio_platform_data sdp2430_gpio_data = { @@ -253,9 +252,10 @@ static void __init omap_2430sdp_map_io(void) MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board") /* Maintainer: Syed Khasim - Texas Instruments Inc */ .boot_params = 0x80000100, - .map_io = omap_2430sdp_map_io, .reserve = omap_reserve, - .init_irq = omap_2430sdp_init_irq, + .map_io = omap_2430sdp_map_io, + .init_early = omap_2430sdp_init_early, + .init_irq = omap_init_irq, .init_machine = omap_2430sdp_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index d4e41ef86aa..31085883199 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -327,14 +327,13 @@ static struct platform_device *sdp3430_devices[] __initdata = { static struct omap_board_config_kernel sdp3430_config[] __initdata = { }; -static void __init omap_3430sdp_init_irq(void) +static void __init omap_3430sdp_init_early(void) { omap_board_config = sdp3430_config; omap_board_config_size = ARRAY_SIZE(sdp3430_config); omap3_pm_init_cpuidle(omap3_cpuidle_params_table); omap2_init_common_infrastructure(); omap2_init_common_devices(hyb18m512160af6_sdrc_params, NULL); - omap_init_irq(); } static int sdp3430_batt_table[] = { @@ -822,9 +821,10 @@ static void __init omap_3430sdp_init(void) MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board") /* Maintainer: Syed Khasim - Texas Instruments Inc */ .boot_params = 0x80000100, - .map_io = omap3_map_io, .reserve = omap_reserve, - .init_irq = omap_3430sdp_init_irq, + .map_io = omap3_map_io, + .init_early = omap_3430sdp_init_early, + .init_irq = omap_init_irq, .init_machine = omap_3430sdp_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index 62645640f5e..16538757291 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -69,14 +69,13 @@ static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { static struct omap_board_config_kernel sdp_config[] __initdata = { }; -static void __init omap_sdp_init_irq(void) +static void __init omap_sdp_init_early(void) { omap_board_config = sdp_config; omap_board_config_size = ARRAY_SIZE(sdp_config); omap2_init_common_infrastructure(); omap2_init_common_devices(h8mbx00u0mer0em_sdrc_params, h8mbx00u0mer0em_sdrc_params); - omap_init_irq(); } #ifdef CONFIG_OMAP_MUX @@ -216,9 +215,10 @@ static void __init omap_sdp_init(void) MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board") .boot_params = 0x80000100, - .map_io = omap3_map_io, .reserve = omap_reserve, - .init_irq = omap_sdp_init_irq, + .map_io = omap3_map_io, + .init_early = omap_sdp_init_early, + .init_irq = omap_init_irq, .init_machine = omap_sdp_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 07d1b20b114..12d99e582cd 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -239,7 +239,7 @@ static struct omap_board_config_kernel sdp4430_config[] __initdata = { { OMAP_TAG_LCD, &sdp4430_lcd_config }, }; -static void __init omap_4430sdp_init_irq(void) +static void __init omap_4430sdp_init_early(void) { omap_board_config = sdp4430_config; omap_board_config_size = ARRAY_SIZE(sdp4430_config); @@ -248,7 +248,6 @@ static void __init omap_4430sdp_init_irq(void) #ifdef CONFIG_OMAP_32K_TIMER omap2_gp_clockevent_set_gptimer(1); #endif - gic_init_irq(); } static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { @@ -605,9 +604,10 @@ static void __init omap_4430sdp_map_io(void) MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board") /* Maintainer: Santosh Shilimkar - Texas Instruments Inc */ .boot_params = 0x80000100, - .map_io = omap_4430sdp_map_io, .reserve = omap_reserve, - .init_irq = omap_4430sdp_init_irq, + .map_io = omap_4430sdp_map_io, + .init_early = omap_4430sdp_init_early, + .init_irq = gic_init_irq, .init_machine = omap_4430sdp_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index 71acb5ab281..ae3a83d47da 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -49,14 +49,13 @@ static struct omap_board_mux board_mux[] __initdata = { #define board_mux NULL #endif -static void __init am3517_crane_init_irq(void) +static void __init am3517_crane_init_early(void) { omap_board_config = am3517_crane_config; omap_board_config_size = ARRAY_SIZE(am3517_crane_config); omap2_init_common_infrastructure(); omap2_init_common_devices(NULL, NULL); - omap_init_irq(); } static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = { @@ -108,9 +107,10 @@ static void __init am3517_crane_init(void) MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD") .boot_params = 0x80000100, - .map_io = omap3_map_io, .reserve = omap_reserve, - .init_irq = am3517_crane_init_irq, + .map_io = omap3_map_io, + .init_early = am3517_crane_init_early, + .init_irq = omap_init_irq, .init_machine = am3517_crane_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 10d60b7743c..d0d0f552813 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -396,13 +396,12 @@ static struct platform_device *am3517_evm_devices[] __initdata = { &am3517_evm_dss_device, }; -static void __init am3517_evm_init_irq(void) +static void __init am3517_evm_init_early(void) { omap_board_config = am3517_evm_config; omap_board_config_size = ARRAY_SIZE(am3517_evm_config); omap2_init_common_infrastructure(); omap2_init_common_devices(NULL, NULL); - omap_init_irq(); } static struct omap_musb_board_data musb_board_data = { @@ -521,9 +520,10 @@ static void __init am3517_evm_init(void) MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM") .boot_params = 0x80000100, - .map_io = omap3_map_io, .reserve = omap_reserve, - .init_irq = am3517_evm_init_irq, + .map_io = omap3_map_io, + .init_early = am3517_evm_init_early, + .init_irq = omap_init_irq, .init_machine = am3517_evm_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 9f55b68687f..4ef4aad4e71 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -274,13 +274,12 @@ static struct omap_board_config_kernel apollon_config[] __initdata = { { OMAP_TAG_LCD, &apollon_lcd_config }, }; -static void __init omap_apollon_init_irq(void) +static void __init omap_apollon_init_early(void) { omap_board_config = apollon_config; omap_board_config_size = ARRAY_SIZE(apollon_config); omap2_init_common_infrastructure(); omap2_init_common_devices(NULL, NULL); - omap_init_irq(); } static void __init apollon_led_init(void) @@ -355,9 +354,10 @@ static void __init omap_apollon_map_io(void) MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon") /* Maintainer: Kyungmin Park */ .boot_params = 0x80000100, - .map_io = omap_apollon_map_io, .reserve = omap_reserve, - .init_irq = omap_apollon_init_irq, + .map_io = omap_apollon_map_io, + .init_early = omap_apollon_init_early, + .init_irq = omap_init_irq, .init_machine = omap_apollon_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index dac14161066..9e4de92a579 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -683,7 +683,7 @@ static void __init cm_t35_init_i2c(void) static struct omap_board_config_kernel cm_t35_config[] __initdata = { }; -static void __init cm_t35_init_irq(void) +static void __init cm_t35_init_early(void) { omap_board_config = cm_t35_config; omap_board_config_size = ARRAY_SIZE(cm_t35_config); @@ -691,7 +691,6 @@ static void __init cm_t35_init_irq(void) omap2_init_common_infrastructure(); omap2_init_common_devices(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); - omap_init_irq(); } static struct omap_board_mux board_mux[] __initdata = { @@ -815,9 +814,10 @@ static void __init cm_t35_init(void) MACHINE_START(CM_T35, "Compulab CM-T35") .boot_params = 0x80000100, - .map_io = omap3_map_io, .reserve = omap_reserve, - .init_irq = cm_t35_init_irq, + .map_io = omap3_map_io, + .init_early = cm_t35_init_early, + .init_irq = omap_init_irq, .init_machine = cm_t35_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index 8f9a64d650e..38bef6d004c 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -254,14 +254,13 @@ static inline void cm_t3517_init_nand(void) {} static struct omap_board_config_kernel cm_t3517_config[] __initdata = { }; -static void __init cm_t3517_init_irq(void) +static void __init cm_t3517_init_early(void) { omap_board_config = cm_t3517_config; omap_board_config_size = ARRAY_SIZE(cm_t3517_config); omap2_init_common_infrastructure(); omap2_init_common_devices(NULL, NULL); - omap_init_irq(); } static struct omap_board_mux board_mux[] __initdata = { @@ -303,9 +302,10 @@ static void __init cm_t3517_init(void) MACHINE_START(CM_T3517, "Compulab CM-T3517") .boot_params = 0x80000100, - .map_io = omap3_map_io, .reserve = omap_reserve, - .init_irq = cm_t3517_init_irq, + .map_io = omap3_map_io, + .init_early = cm_t3517_init_early, + .init_irq = omap_init_irq, .init_machine = cm_t3517_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 9a2a31e011c..af742887e83 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -456,11 +456,15 @@ static struct platform_device keys_gpio = { }; -static void __init devkit8000_init_irq(void) +static void __init devkit8000_init_early(void) { omap2_init_common_infrastructure(); omap2_init_common_devices(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); +} + +static void __init devkit8000_init_irq(void) +{ omap_init_irq(); #ifdef CONFIG_OMAP_32K_TIMER omap2_gp_clockevent_set_gptimer(12); @@ -813,8 +817,9 @@ static void __init devkit8000_init(void) MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000") .boot_params = 0x80000100, - .map_io = omap3_map_io, .reserve = omap_reserve, + .map_io = omap3_map_io, + .init_early = devkit8000_init_early, .init_irq = devkit8000_init_irq, .init_machine = devkit8000_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 0e3d81e09f8..682da9251db 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -33,13 +33,12 @@ static struct omap_board_config_kernel generic_config[] = { }; -static void __init omap_generic_init_irq(void) +static void __init omap_generic_init_early(void) { omap_board_config = generic_config; omap_board_config_size = ARRAY_SIZE(generic_config); omap2_init_common_infrastructure(); omap2_init_common_devices(NULL, NULL); - omap_init_irq(); } static void __init omap_generic_init(void) @@ -68,9 +67,10 @@ static void __init omap_generic_map_io(void) MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx") /* Maintainer: Paul Mundt */ .boot_params = 0x80000100, - .map_io = omap_generic_map_io, .reserve = omap_reserve, - .init_irq = omap_generic_init_irq, + .map_io = omap_generic_map_io, + .init_early = omap_generic_init_early, + .init_irq = omap_init_irq, .init_machine = omap_generic_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 25cc9dad4b0..f6a3872f72f 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -290,12 +290,16 @@ static struct omap_board_config_kernel h4_config[] __initdata = { { OMAP_TAG_LCD, &h4_lcd_config }, }; -static void __init omap_h4_init_irq(void) +static void __init omap_h4_init_early(void) { omap_board_config = h4_config; omap_board_config_size = ARRAY_SIZE(h4_config); omap2_init_common_infrastructure(); omap2_init_common_devices(NULL, NULL); +} + +static void __init omap_h4_init_irq(void) +{ omap_init_irq(); h4_init_flash(); } @@ -378,8 +382,9 @@ static void __init omap_h4_map_io(void) MACHINE_START(OMAP_H4, "OMAP2420 H4 board") /* Maintainer: Paul Mundt */ .boot_params = 0x80000100, - .map_io = omap_h4_map_io, .reserve = omap_reserve, + .map_io = omap_h4_map_io, + .init_early = omap_h4_init_early, .init_irq = omap_h4_init_irq, .init_machine = omap_h4_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 3be85a1f55f..dd0b1ac3b66 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -525,12 +525,11 @@ static struct platform_device *igep2_devices[] __initdata = { &igep2_vwlan_device, }; -static void __init igep2_init_irq(void) +static void __init igep2_init_early(void) { omap2_init_common_infrastructure(); omap2_init_common_devices(m65kxxxxam_sdrc_params, m65kxxxxam_sdrc_params); - omap_init_irq(); } static struct twl4030_codec_audio_data igep2_audio_data = { @@ -716,9 +715,10 @@ static void __init igep2_init(void) MACHINE_START(IGEP0020, "IGEP v2 board") .boot_params = 0x80000100, - .map_io = omap3_map_io, .reserve = omap_reserve, - .init_irq = igep2_init_irq, + .map_io = omap3_map_io, + .init_early = igep2_init_early, + .init_irq = omap_init_irq, .init_machine = igep2_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c index 4dc62a9b9cb..d75028e48f5 100644 --- a/arch/arm/mach-omap2/board-igep0030.c +++ b/arch/arm/mach-omap2/board-igep0030.c @@ -331,12 +331,11 @@ static struct platform_device *igep3_devices[] __initdata = { &igep3_vwlan_device, }; -static void __init igep3_init_irq(void) +static void __init igep3_init_early(void) { omap2_init_common_infrastructure(); omap2_init_common_devices(m65kxxxxam_sdrc_params, m65kxxxxam_sdrc_params); - omap_init_irq(); } static struct twl4030_platform_data igep3_twl4030_pdata = { @@ -452,7 +451,8 @@ MACHINE_START(IGEP0030, "IGEP OMAP3 module") .boot_params = 0x80000100, .reserve = omap_reserve, .map_io = omap3_map_io, - .init_irq = igep3_init_irq, + .init_early = igep3_init_early, + .init_irq = omap_init_irq, .init_machine = igep3_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index e5dc74875f9..d8eb2cb7cbc 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -288,13 +288,12 @@ static struct omap_board_config_kernel ldp_config[] __initdata = { { OMAP_TAG_LCD, &ldp_lcd_config }, }; -static void __init omap_ldp_init_irq(void) +static void __init omap_ldp_init_early(void) { omap_board_config = ldp_config; omap_board_config_size = ARRAY_SIZE(ldp_config); omap2_init_common_infrastructure(); omap2_init_common_devices(NULL, NULL); - omap_init_irq(); } static struct twl4030_usb_data ldp_usb_data = { @@ -443,9 +442,10 @@ static void __init omap_ldp_init(void) MACHINE_START(OMAP_LDP, "OMAP LDP board") .boot_params = 0x80000100, - .map_io = omap3_map_io, .reserve = omap_reserve, - .init_irq = omap_ldp_init_irq, + .map_io = omap3_map_io, + .init_early = omap_ldp_init_early, + .init_irq = omap_init_irq, .init_machine = omap_ldp_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index f396756872b..b36cbd21e2d 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -628,11 +628,10 @@ static void __init n8x0_map_io(void) omap242x_map_common_io(); } -static void __init n8x0_init_irq(void) +static void __init n8x0_init_early(void) { omap2_init_common_infrastructure(); omap2_init_common_devices(NULL, NULL); - omap_init_irq(); } #ifdef CONFIG_OMAP_MUX @@ -703,27 +702,30 @@ static void __init n8x0_init_machine(void) MACHINE_START(NOKIA_N800, "Nokia N800") .boot_params = 0x80000100, - .map_io = n8x0_map_io, .reserve = omap_reserve, - .init_irq = n8x0_init_irq, + .map_io = n8x0_map_io, + .init_early = n8x0_init_early, + .init_irq = omap_init_irq, .init_machine = n8x0_init_machine, .timer = &omap_timer, MACHINE_END MACHINE_START(NOKIA_N810, "Nokia N810") .boot_params = 0x80000100, - .map_io = n8x0_map_io, .reserve = omap_reserve, - .init_irq = n8x0_init_irq, + .map_io = n8x0_map_io, + .init_early = n8x0_init_early, + .init_irq = omap_init_irq, .init_machine = n8x0_init_machine, .timer = &omap_timer, MACHINE_END MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX") .boot_params = 0x80000100, - .map_io = n8x0_map_io, .reserve = omap_reserve, - .init_irq = n8x0_init_irq, + .map_io = n8x0_map_io, + .init_early = n8x0_init_early, + .init_irq = omap_init_irq, .init_machine = n8x0_init_machine, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 46d814ab565..19bcd004d60 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -536,11 +536,15 @@ static struct platform_device keys_gpio = { }, }; -static void __init omap3_beagle_init_irq(void) +static void __init omap3_beagle_init_early(void) { omap2_init_common_infrastructure(); omap2_init_common_devices(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); +} + +static void __init omap3_beagle_init_irq(void) +{ omap_init_irq(); #ifdef CONFIG_OMAP_32K_TIMER omap2_gp_clockevent_set_gptimer(12); @@ -638,8 +642,9 @@ static void __init omap3_beagle_init(void) MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") /* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */ .boot_params = 0x80000100, - .map_io = omap3_map_io, .reserve = omap_reserve, + .map_io = omap3_map_io, + .init_early = omap3_beagle_init_early, .init_irq = omap3_beagle_init_irq, .init_machine = omap3_beagle_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 323c3809ce3..c2a0fca4aa5 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -625,13 +625,12 @@ static struct spi_board_info omap3evm_spi_board_info[] = { static struct omap_board_config_kernel omap3_evm_config[] __initdata = { }; -static void __init omap3_evm_init_irq(void) +static void __init omap3_evm_init_early(void) { omap_board_config = omap3_evm_config; omap_board_config_size = ARRAY_SIZE(omap3_evm_config); omap2_init_common_infrastructure(); omap2_init_common_devices(mt46h32m32lf6_sdrc_params, NULL); - omap_init_irq(); } static struct platform_device *omap3_evm_devices[] __initdata = { @@ -720,9 +719,10 @@ static void __init omap3_evm_init(void) MACHINE_START(OMAP3EVM, "OMAP3 EVM") /* Maintainer: Syed Mohammed Khasim - Texas Instruments */ .boot_params = 0x80000100, - .map_io = omap3_map_io, .reserve = omap_reserve, - .init_irq = omap3_evm_init_irq, + .map_io = omap3_map_io, + .init_early = omap3_evm_init_early, + .init_irq = omap_init_irq, .init_machine = omap3_evm_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index 15e4b08e99b..b726943d7c9 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -195,11 +195,10 @@ static inline void __init board_smsc911x_init(void) gpmc_smsc911x_init(&board_smsc911x_data); } -static void __init omap3logic_init_irq(void) +static void __init omap3logic_init_early(void) { omap2_init_common_infrastructure(); omap2_init_common_devices(NULL, NULL); - omap_init_irq(); } #ifdef CONFIG_OMAP_MUX @@ -225,7 +224,8 @@ static void __init omap3logic_init(void) MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board") .boot_params = 0x80000100, .map_io = omap3_map_io, - .init_irq = omap3logic_init_irq, + .init_early = omap3logic_init_early, + .init_irq = omap_init_irq, .init_machine = omap3logic_init, .timer = &omap_timer, MACHINE_END @@ -233,7 +233,8 @@ MACHINE_END MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board") .boot_params = 0x80000100, .map_io = omap3_map_io, - .init_irq = omap3logic_init_irq, + .init_early = omap3logic_init_early, + .init_irq = omap_init_irq, .init_machine = omap3logic_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 0b34beded11..b91f74ce3a9 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -634,12 +634,11 @@ static struct spi_board_info omap3pandora_spi_board_info[] __initdata = { } }; -static void __init omap3pandora_init_irq(void) +static void __init omap3pandora_init_early(void) { omap2_init_common_infrastructure(); omap2_init_common_devices(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); - omap_init_irq(); } static void __init pandora_wl1251_init(void) @@ -727,9 +726,10 @@ static void __init omap3pandora_init(void) MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console") .boot_params = 0x80000100, - .map_io = omap3_map_io, .reserve = omap_reserve, - .init_irq = omap3pandora_init_irq, + .map_io = omap3_map_io, + .init_early = omap3pandora_init_early, + .init_irq = omap_init_irq, .init_machine = omap3pandora_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 2a2dad447e8..5d1ccef6916 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -591,12 +591,16 @@ static struct spi_board_info omap3stalker_spi_board_info[] = { static struct omap_board_config_kernel omap3_stalker_config[] __initdata = { }; -static void __init omap3_stalker_init_irq(void) +static void __init omap3_stalker_init_early(void) { omap_board_config = omap3_stalker_config; omap_board_config_size = ARRAY_SIZE(omap3_stalker_config); omap2_init_common_infrastructure(); omap2_init_common_devices(mt46h32m32lf6_sdrc_params, NULL); +} + +static void __init omap3_stalker_init_irq(void) +{ omap_init_irq(); #ifdef CONFIG_OMAP_32K_TIMER omap2_gp_clockevent_set_gptimer(12); @@ -666,6 +670,7 @@ MACHINE_START(SBC3530, "OMAP3 STALKER") /* Maintainer: Jason Lam -lzg@ema-tech.com */ .boot_params = 0x80000100, .map_io = omap3_map_io, + .init_early = omap3_stalker_init_early, .init_irq = omap3_stalker_init_irq, .init_machine = omap3_stalker_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index db1f74fe6c4..6a60f79dccc 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -415,7 +415,7 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static void __init omap3_touchbook_init_irq(void) +static void __init omap3_touchbook_init_early(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_board_config = omap3_touchbook_config; @@ -423,6 +423,10 @@ static void __init omap3_touchbook_init_irq(void) omap2_init_common_infrastructure(); omap2_init_common_devices(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); +} + +static void __init omap3_touchbook_init_irq(void) +{ omap_init_irq(); #ifdef CONFIG_OMAP_32K_TIMER omap2_gp_clockevent_set_gptimer(12); @@ -538,8 +542,9 @@ static void __init omap3_touchbook_init(void) MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board") /* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */ .boot_params = 0x80000100, - .map_io = omap3_map_io, .reserve = omap_reserve, + .map_io = omap3_map_io, + .init_early = omap3_touchbook_init_early, .init_irq = omap3_touchbook_init_irq, .init_machine = omap3_touchbook_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index e944025d5ef..fca5b9e80c1 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -76,11 +76,10 @@ static struct platform_device *panda_devices[] __initdata = { &leds_gpio, }; -static void __init omap4_panda_init_irq(void) +static void __init omap4_panda_init_early(void) { omap2_init_common_infrastructure(); omap2_init_common_devices(NULL, NULL); - gic_init_irq(); } static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { @@ -424,7 +423,8 @@ MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board") .boot_params = 0x80000100, .reserve = omap_reserve, .map_io = omap4_panda_map_io, - .init_irq = omap4_panda_init_irq, + .init_early = omap4_panda_init_early, + .init_irq = gic_init_irq, .init_machine = omap4_panda_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index cb26e5d8268..a33ec0edec1 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -409,14 +409,13 @@ static struct omap_board_config_kernel overo_config[] __initdata = { { OMAP_TAG_LCD, &overo_lcd_config }, }; -static void __init overo_init_irq(void) +static void __init overo_init_early(void) { omap_board_config = overo_config; omap_board_config_size = ARRAY_SIZE(overo_config); omap2_init_common_infrastructure(); omap2_init_common_devices(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); - omap_init_irq(); } static struct platform_device *overo_devices[] __initdata = { @@ -501,9 +500,10 @@ static void __init overo_init(void) MACHINE_START(OVERO, "Gumstix Overo") .boot_params = 0x80000100, - .map_io = omap3_map_io, .reserve = omap_reserve, - .init_irq = overo_init_irq, + .map_io = omap3_map_io, + .init_early = overo_init_early, + .init_irq = omap_init_irq, .init_machine = overo_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index 39a71bb8a30..bdebcb7328e 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -138,14 +138,13 @@ static void __init rm680_peripherals_init(void) omap2_hsmmc_init(mmc); } -static void __init rm680_init_irq(void) +static void __init rm680_init_early(void) { struct omap_sdrc_params *sdrc_params; omap2_init_common_infrastructure(); sdrc_params = nokia_get_sdram_timings(); omap2_init_common_devices(sdrc_params, sdrc_params); - omap_init_irq(); } #ifdef CONFIG_OMAP_MUX @@ -176,9 +175,10 @@ static void __init rm680_map_io(void) MACHINE_START(NOKIA_RM680, "Nokia RM-680 board") .boot_params = 0x80000100, - .map_io = rm680_map_io, .reserve = omap_reserve, - .init_irq = rm680_init_irq, + .map_io = rm680_map_io, + .init_early = rm680_init_early, + .init_irq = omap_init_irq, .init_machine = rm680_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index f53fc551c58..3cf72fe6d75 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -98,7 +98,7 @@ static struct omap_board_config_kernel rx51_config[] = { { OMAP_TAG_LCD, &rx51_lcd_config }, }; -static void __init rx51_init_irq(void) +static void __init rx51_init_early(void) { struct omap_sdrc_params *sdrc_params; @@ -108,7 +108,6 @@ static void __init rx51_init_irq(void) omap2_init_common_infrastructure(); sdrc_params = nokia_get_sdram_timings(); omap2_init_common_devices(sdrc_params, sdrc_params); - omap_init_irq(); } extern void __init rx51_peripherals_init(void); @@ -149,9 +148,10 @@ static void __init rx51_map_io(void) MACHINE_START(NOKIA_RX51, "Nokia RX-51 board") /* Maintainer: Lauri Leukkunen */ .boot_params = 0x80000100, - .map_io = rx51_map_io, .reserve = omap_reserve, - .init_irq = rx51_init_irq, + .map_io = rx51_map_io, + .init_early = rx51_init_early, + .init_irq = omap_init_irq, .init_machine = rx51_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c index e26754c24ee..85d4170f30a 100644 --- a/arch/arm/mach-omap2/board-zoom.c +++ b/arch/arm/mach-omap2/board-zoom.c @@ -33,7 +33,7 @@ #define ZOOM3_EHCI_RESET_GPIO 64 -static void __init omap_zoom_init_irq(void) +static void __init omap_zoom_init_early(void) { omap2_init_common_infrastructure(); if (machine_is_omap_zoom2()) @@ -42,8 +42,6 @@ static void __init omap_zoom_init_irq(void) else if (machine_is_omap_zoom3()) omap2_init_common_devices(h8mbx00u0mer0em_sdrc_params, h8mbx00u0mer0em_sdrc_params); - - omap_init_irq(); } #ifdef CONFIG_OMAP_MUX @@ -135,18 +133,20 @@ static void __init omap_zoom_init(void) MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") .boot_params = 0x80000100, - .map_io = omap3_map_io, .reserve = omap_reserve, - .init_irq = omap_zoom_init_irq, + .map_io = omap3_map_io, + .init_early = omap_zoom_init_early, + .init_irq = omap_init_irq, .init_machine = omap_zoom_init, .timer = &omap_timer, MACHINE_END MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board") .boot_params = 0x80000100, - .map_io = omap3_map_io, .reserve = omap_reserve, - .init_irq = omap_zoom_init_irq, + .map_io = omap3_map_io, + .init_early = omap_zoom_init_early, + .init_irq = omap_init_irq, .init_machine = omap_zoom_init, .timer = &omap_timer, MACHINE_END -- cgit v1.2.3-18-g5258 From 44dc046e93eb98d41048954f700b1927f7e288ed Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 14 Feb 2011 15:40:20 -0800 Subject: omap2+: Make omap_hwmod_late_init into core_initcall Otherwise things will fail with early_init changes. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/io.c | 2 -- arch/arm/mach-omap2/omap_hwmod.c | 3 ++- arch/arm/plat-omap/include/plat/omap_hwmod.h | 1 - 3 files changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index c2032041d26..f89173ab4ab 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -400,8 +400,6 @@ void __init omap2_init_common_devices(struct omap_sdrc_params *sdrc_cs0, { omap_serial_early_init(); - omap_hwmod_late_init(); - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { omap2_sdrc_init(sdrc_cs0, sdrc_cs1); _omap2_init_reprogram_sdrc(); diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index e282e35769f..eacdfd3a14d 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1628,7 +1628,7 @@ int __init omap_hwmod_init(struct omap_hwmod **ohs) * to struct clk pointers for each registered omap_hwmod. Also calls * _setup() on each hwmod. Returns 0. */ -int omap_hwmod_late_init(void) +static int __init omap_hwmod_late_init(void) { int r; @@ -1644,6 +1644,7 @@ int omap_hwmod_late_init(void) return 0; } +core_initcall(omap_hwmod_late_init); /** * omap_hwmod_enable - enable an omap_hwmod diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index 1eee85a8abb..fedd82971c9 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -539,7 +539,6 @@ int omap_hwmod_init(struct omap_hwmod **ohs); struct omap_hwmod *omap_hwmod_lookup(const char *name); int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data), void *data); -int omap_hwmod_late_init(void); int omap_hwmod_enable(struct omap_hwmod *oh); int _omap_hwmod_enable(struct omap_hwmod *oh); -- cgit v1.2.3-18-g5258 From 3e16f92536334ccb464ed88cf4d8cc0dd43da106 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 14 Feb 2011 15:40:20 -0800 Subject: omap2+: Fix omap_serial_early_init to work with init_early hook The new init_early hook happens at the end of setup_arch, which is too early for kzalloc. However, there's no need to call omap_serial_early_init that early, so fix this by setting it up as a core_initcall. Signed-off-by: Tony Lindgren Tested-by: Kevin Hilman --- arch/arm/mach-omap2/io.c | 2 -- arch/arm/mach-omap2/serial.c | 7 +++++-- arch/arm/plat-omap/include/plat/serial.h | 1 - 3 files changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index f89173ab4ab..26a61cf2729 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -398,8 +398,6 @@ void __init omap2_init_common_infrastructure(void) void __init omap2_init_common_devices(struct omap_sdrc_params *sdrc_cs0, struct omap_sdrc_params *sdrc_cs1) { - omap_serial_early_init(); - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { omap2_sdrc_init(sdrc_cs0, sdrc_cs1); _omap2_init_reprogram_sdrc(); diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 32e91a9c8b6..74e25cd4bd3 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -655,7 +655,7 @@ static void serial_out_override(struct uart_port *up, int offset, int value) } #endif -void __init omap_serial_early_init(void) +static int __init omap_serial_early_init(void) { int i = 0; @@ -672,7 +672,7 @@ void __init omap_serial_early_init(void) uart = kzalloc(sizeof(struct omap_uart_state), GFP_KERNEL); if (WARN_ON(!uart)) - return; + return -ENODEV; uart->oh = oh; uart->num = i++; @@ -691,7 +691,10 @@ void __init omap_serial_early_init(void) */ uart->oh->flags |= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET; } while (1); + + return 0; } +core_initcall(omap_serial_early_init); /** * omap_serial_init_port() - initialize single serial port diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h index cec5d56db2e..a1a118d052e 100644 --- a/arch/arm/plat-omap/include/plat/serial.h +++ b/arch/arm/plat-omap/include/plat/serial.h @@ -96,7 +96,6 @@ struct omap_board_data; -extern void __init omap_serial_early_init(void); extern void omap_serial_init(void); extern void omap_serial_init_port(struct omap_board_data *bdata); extern int omap_uart_can_sleep(void); -- cgit v1.2.3-18-g5258 From e7c7d760859e78a4f47e7be647df683491e420fb Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 14 Feb 2011 15:40:21 -0800 Subject: omap: hwmod: Populate _mpu_rt_va later on in omap_hwmod_late_init Otherwise ioremap can fail with early_init patch unless we have a static mapping for everything. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod.c | 28 ++++++++++++++++++++++++---- 1 file changed, 24 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index eacdfd3a14d..9e89a58711b 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1467,12 +1467,10 @@ static int __init _register(struct omap_hwmod *oh) return -EEXIST; ms_id = _find_mpu_port_index(oh); - if (!IS_ERR_VALUE(ms_id)) { + if (!IS_ERR_VALUE(ms_id)) oh->_mpu_port_index = ms_id; - oh->_mpu_rt_va = _find_mpu_rt_base(oh, oh->_mpu_port_index); - } else { + else oh->_int_flags |= _HWMOD_NO_MPU_PORT; - } list_add_tail(&oh->node, &omap_hwmod_list); @@ -1621,6 +1619,26 @@ int __init omap_hwmod_init(struct omap_hwmod **ohs) return 0; } +/* + * _populate_mpu_rt_base - populate the virtual address for a hwmod + * + * Must be called only from omap_hwmod_late_init so ioremap works properly. + * Assumes the caller takes care of locking if needed. + * + */ +static int __init _populate_mpu_rt_base(struct omap_hwmod *oh, void *data) +{ + if (oh->_int_flags & _HWMOD_NO_MPU_PORT) + return 0; + + oh->_mpu_rt_va = _find_mpu_rt_base(oh, oh->_mpu_port_index); + if (!oh->_mpu_rt_va) + pr_warning("omap_hwmod: %s found no _mpu_rt_va for %s\n", + __func__, oh->name); + + return 0; +} + /** * omap_hwmod_late_init - do some post-clock framework initialization * @@ -1632,6 +1650,8 @@ static int __init omap_hwmod_late_init(void) { int r; + r = omap_hwmod_for_each(_populate_mpu_rt_base, NULL); + /* XXX check return value */ r = omap_hwmod_for_each(_init_clocks, NULL); WARN(r, "omap_hwmod: omap_hwmod_late_init(): _init_clocks failed\n"); -- cgit v1.2.3-18-g5258 From 9e81509efc4fefcdd75cc6a4121672fa71ae8745 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Mon, 14 Feb 2011 18:14:51 +0100 Subject: x86, amd: Initialize variable properly Commit d518573de63f ("x86, amd: Normalize compute unit IDs on multi-node processors") introduced compute unit normalization but causes a compiler warning: arch/x86/kernel/cpu/amd.c: In function 'amd_detect_cmp': arch/x86/kernel/cpu/amd.c:268: warning: 'cores_per_cu' may be used uninitialized in this function arch/x86/kernel/cpu/amd.c:268: note: 'cores_per_cu' was declared here The compiler is right - initialize it with a proper value. Also, fix up a comment while at it. Reported-by: Andrew Morton Signed-off-by: Borislav Petkov Cc: Andreas Herrmann LKML-Reference: <20110214171451.GB10076@kryptos.osrc.amd.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/amd.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 990cc486158..589bdd7a4cf 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -261,7 +261,7 @@ static int __cpuinit nearby_node(int apicid) #ifdef CONFIG_X86_HT static void __cpuinit amd_get_topology(struct cpuinfo_x86 *c) { - u32 nodes, cores_per_cu; + u32 nodes, cores_per_cu = 1; u8 node_id; int cpu = smp_processor_id(); @@ -276,7 +276,7 @@ static void __cpuinit amd_get_topology(struct cpuinfo_x86 *c) /* get compute unit information */ smp_num_siblings = ((ebx >> 8) & 3) + 1; c->compute_unit_id = ebx & 0xff; - cores_per_cu = ((ebx >> 8) & 3) + 1; + cores_per_cu += ((ebx >> 8) & 3); } else if (cpu_has(c, X86_FEATURE_NODEID_MSR)) { u64 value; @@ -298,7 +298,7 @@ static void __cpuinit amd_get_topology(struct cpuinfo_x86 *c) /* store NodeID, use llc_shared_map to store sibling info */ per_cpu(cpu_llc_id, cpu) = node_id; - /* core id to be in range from 0 to (cores_per_node - 1) */ + /* core id has to be in the [0 .. cores_per_node - 1] range */ c->cpu_core_id %= cores_per_node; c->compute_unit_id %= cus_per_node; } -- cgit v1.2.3-18-g5258 From 678301ecadec24ff77ab310eebf8a32ccddb1850 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Mon, 14 Feb 2011 22:52:38 +0100 Subject: x86, ioapic: Don't warn about non-existing IOAPICs if we have none mp_find_ioapic() prints errors like: ERROR: Unable to locate IOAPIC for GSI 13 if it can't find the IOAPIC that manages that specific GSI. I see errors like that at every boot of a laptop that apparently doesn't have any IOAPICs. But if there are no IOAPICs it doesn't seem to be an error that none can be found. A solution that gets rid of this message is to directly return if nr_ioapics (still) is zero. (But keep returning -1 in that case, so nothing breaks from this change.) The call chain that generates this error is: pnpacpi_allocated_resource() case ACPI_RESOURCE_TYPE_IRQ: pnpacpi_parse_allocated_irqresource() acpi_get_override_irq() mp_find_ioapic() Signed-off-by: Paul Bolle Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/io_apic.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 697dc34b7b8..ca9e2a3545a 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -4002,6 +4002,9 @@ int mp_find_ioapic(u32 gsi) { int i = 0; + if (nr_ioapics == 0) + return -1; + /* Find the IOAPIC that manages this GSI. */ for (i = 0; i < nr_ioapics; i++) { if ((gsi >= mp_gsi_routing[i].gsi_base) -- cgit v1.2.3-18-g5258 From 84e383b322e5348db03be54ff64cc6da87003717 Mon Sep 17 00:00:00 2001 From: Naga Chumbalkar Date: Mon, 14 Feb 2011 22:47:17 +0000 Subject: x86, dmi, debug: Log board name (when present) in dmesg/oops output The "Type 2" SMBIOS record that contains Board Name is not strictly required and may be absent in the SMBIOS on some platforms. ( Please note that Type 2 is not listed in Table 3 in Sec 6.2 ("Required Structures and Data") of the SMBIOS v2.7 Specification. ) Use the Manufacturer Name (aka System Vendor) name. Print Board Name only when it is present. Before the fix: (i) dmesg output: DMI: /ProLiant DL380 G6, BIOS P62 01/29/2011 (ii) oops output: Pid: 2170, comm: bash Not tainted 2.6.38-rc4+ #3 /ProLiant DL380 G6 After the fix: (i) dmesg output: DMI: HP ProLiant DL380 G6, BIOS P62 01/29/2011 (ii) oops output: Pid: 2278, comm: bash Not tainted 2.6.38-rc4+ #4 HP ProLiant DL380 G6 Signed-off-by: Naga Chumbalkar Reviewed-by: Bjorn Helgaas Cc: # .3x - good for debugging, please apply as far back as it applies cleanly LKML-Reference: <20110214224423.2182.13929.sendpatchset@nchumbalkar.americas.hpqcorp.net> Signed-off-by: Ingo Molnar --- arch/x86/kernel/process.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index 3c189e9accd..ff455419898 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -92,21 +92,31 @@ void show_regs(struct pt_regs *regs) void show_regs_common(void) { - const char *board, *product; + const char *vendor, *product, *board; - board = dmi_get_system_info(DMI_BOARD_NAME); - if (!board) - board = ""; + vendor = dmi_get_system_info(DMI_SYS_VENDOR); + if (!vendor) + vendor = ""; product = dmi_get_system_info(DMI_PRODUCT_NAME); if (!product) product = ""; + /* Board Name is optional */ + board = dmi_get_system_info(DMI_BOARD_NAME); + printk(KERN_CONT "\n"); - printk(KERN_DEFAULT "Pid: %d, comm: %.20s %s %s %.*s %s/%s\n", + printk(KERN_DEFAULT "Pid: %d, comm: %.20s %s %s %.*s", current->pid, current->comm, print_tainted(), init_utsname()->release, (int)strcspn(init_utsname()->version, " "), - init_utsname()->version, board, product); + init_utsname()->version); + printk(KERN_CONT " "); + printk(KERN_CONT "%s %s", vendor, product); + if (board) { + printk(KERN_CONT "/"); + printk(KERN_CONT "%s", board); + } + printk(KERN_CONT "\n"); } void flush_thread(void) -- cgit v1.2.3-18-g5258 From a086536858ad0eb51c58074af2fc2c89ba9c1f5e Mon Sep 17 00:00:00 2001 From: Stuart Menefy Date: Thu, 11 Nov 2010 18:26:31 +0000 Subject: sh: Ensure ST40-300 BogoMIPS value is consistent A strange variation was seen in the BogoMIPS figure for the ST40-300. This was eventually tracked down to sensitivity to the alignment of the loop. So add an align directive to ensure this doesn't occur. Signed-off-by: Stuart Menefy Signed-off-by: Paul Mundt --- arch/sh/lib/delay.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/sh/lib/delay.c b/arch/sh/lib/delay.c index faa8f86c0db..0901b2f14e1 100644 --- a/arch/sh/lib/delay.c +++ b/arch/sh/lib/delay.c @@ -10,6 +10,16 @@ void __delay(unsigned long loops) { __asm__ __volatile__( + /* + * ST40-300 appears to have an issue with this code, + * normally taking two cycles each loop, as with all + * other SH variants. If however the branch and the + * delay slot straddle an 8 byte boundary, this increases + * to 3 cycles. + * This align directive ensures this doesn't occur. + */ + ".balign 8\n\t" + "tst %0, %0\n\t" "1:\t" "bf/s 1b\n\t" -- cgit v1.2.3-18-g5258 From a25bbe12224e649fe12cba7a2fa920180a35c8a9 Mon Sep 17 00:00:00 2001 From: Stuart Menefy Date: Mon, 31 Jan 2011 17:50:29 +0000 Subject: sh: Flush executable pages in copy_user_highpage This resolves a problem seen when using the Android dynamic linker. Sometimes the dynamic linker would seg-fault at start up and this was eventually traced to the handling of a COW fault for a page which was being modified by the linker. If there was no cache aliasing between the kernel and the user page, the page was not flushed, leaving the newly copied data in the D-cache. However when executing instructions from that page, the I-cache is filled directly from external memory, rather than the D-cache, and causing garbage to be executed. Signed-off-by: Stuart Menefy Signed-off-by: Paul Mundt --- arch/sh/mm/cache.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c index 88d3dc3d30d..5a580ea0442 100644 --- a/arch/sh/mm/cache.c +++ b/arch/sh/mm/cache.c @@ -108,7 +108,8 @@ void copy_user_highpage(struct page *to, struct page *from, kunmap_atomic(vfrom, KM_USER0); } - if (pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK)) + if (pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK) || + (vma->vm_flags & VM_EXEC)) __flush_purge_region(vto, PAGE_SIZE); kunmap_atomic(vto, KM_USER1); -- cgit v1.2.3-18-g5258 From 13c12a4e8ecdf3998cd2d89ade69f6f194819c95 Mon Sep 17 00:00:00 2001 From: Francesco Virlinzi Date: Tue, 8 Feb 2011 16:27:12 +0100 Subject: sh: Change __nosave_XXX symbols to long This patch changes the: - __nosave_begin - __nosave_end symbols from 'void' to 'long' as required by the latest Gcc (4.5.2) which raises the compilation error: cc1: warnings being treated as errors arch/sh/kernel/swsusp.c: In function 'pfn_is_nosave': arch/sh/kernel/swsusp.c:24:28: error: taking address of expression of type 'void' arch/sh/kernel/swsusp.c:25:26: error: taking address of expression of type 'void' arch/sh/kernel/swsusp.c:25:26: error: taking address of expression of type 'void' arch/sh/kernel/swsusp.c:25:26: error: taking address of expression of type 'void' Signed-off-by: Francesco Virlinzi Signed-off-by: Paul Mundt --- arch/sh/include/asm/sections.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sh/include/asm/sections.h b/arch/sh/include/asm/sections.h index a78701da775..4a5350037c8 100644 --- a/arch/sh/include/asm/sections.h +++ b/arch/sh/include/asm/sections.h @@ -3,7 +3,7 @@ #include -extern void __nosave_begin, __nosave_end; +extern long __nosave_begin, __nosave_end; extern long __machvec_start, __machvec_end; extern char __uncached_start, __uncached_end; extern char _ebss[]; -- cgit v1.2.3-18-g5258 From 4ba8a40ea5c93843b0f2b3fd464978c7ad5431c2 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 15 Feb 2011 05:03:46 +0000 Subject: ARM: mach-shmobile: ap4evb: fixup memory initialize for zboot Current ap4evb had issue which couldn't boot sometimes. This patch fixup it. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/include/mach/head-ap4evb.txt | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/include/mach/head-ap4evb.txt b/arch/arm/mach-shmobile/include/mach/head-ap4evb.txt index efd3687ba19..3029aba3868 100644 --- a/arch/arm/mach-shmobile/include/mach/head-ap4evb.txt +++ b/arch/arm/mach-shmobile/include/mach/head-ap4evb.txt @@ -6,13 +6,10 @@ LIST "RWT Setting" EW 0xE6020004, 0xA500 EW 0xE6030004, 0xA500 -DD 0x01001000, 0x01001000 - LIST "GPIO Setting" EB 0xE6051013, 0xA2 LIST "CPG" -ED 0xE6150080, 0x00000180 ED 0xE61500C0, 0x00000002 WAIT 1, 0xFE40009C @@ -37,6 +34,9 @@ ED 0xE615002C, 0x93000040 WAIT 1, 0xFE40009C +LIST "SUB/USBClk" +ED 0xE6150080, 0x00000180 + LIST "BSC" ED 0xFEC10000, 0x00E0001B @@ -53,7 +53,7 @@ ED 0xFE400048, 0x20C18505 ED 0xFE40004C, 0x00110209 ED 0xFE400010, 0x00000087 -WAIT 10, 0xFE40009C +WAIT 30, 0xFE40009C ED 0xFE400084, 0x0000003F EB 0xFE500000, 0x00 @@ -84,7 +84,7 @@ ED 0xE6150004, 0x80331050 WAIT 1, 0xFE40009C -ED 0xE6150354, 0x00000002 +ED 0xFE400354, 0x01AD8002 LIST "SCIF0 - Serial port for earlyprintk" EB 0xE6053098, 0x11 -- cgit v1.2.3-18-g5258 From 0acb6209a2443797cf2e15b3d978a03efa0765a3 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 15 Feb 2011 05:03:53 +0000 Subject: ARM: mach-shmobile: mackerel: fixup memory initialize for zboot Current makerel had issue which couldn't boot sometimes. This patch fixup it. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/include/mach/head-mackerel.txt | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/include/mach/head-mackerel.txt b/arch/arm/mach-shmobile/include/mach/head-mackerel.txt index efd3687ba19..3029aba3868 100644 --- a/arch/arm/mach-shmobile/include/mach/head-mackerel.txt +++ b/arch/arm/mach-shmobile/include/mach/head-mackerel.txt @@ -6,13 +6,10 @@ LIST "RWT Setting" EW 0xE6020004, 0xA500 EW 0xE6030004, 0xA500 -DD 0x01001000, 0x01001000 - LIST "GPIO Setting" EB 0xE6051013, 0xA2 LIST "CPG" -ED 0xE6150080, 0x00000180 ED 0xE61500C0, 0x00000002 WAIT 1, 0xFE40009C @@ -37,6 +34,9 @@ ED 0xE615002C, 0x93000040 WAIT 1, 0xFE40009C +LIST "SUB/USBClk" +ED 0xE6150080, 0x00000180 + LIST "BSC" ED 0xFEC10000, 0x00E0001B @@ -53,7 +53,7 @@ ED 0xFE400048, 0x20C18505 ED 0xFE40004C, 0x00110209 ED 0xFE400010, 0x00000087 -WAIT 10, 0xFE40009C +WAIT 30, 0xFE40009C ED 0xFE400084, 0x0000003F EB 0xFE500000, 0x00 @@ -84,7 +84,7 @@ ED 0xE6150004, 0x80331050 WAIT 1, 0xFE40009C -ED 0xE6150354, 0x00000002 +ED 0xFE400354, 0x01AD8002 LIST "SCIF0 - Serial port for earlyprintk" EB 0xE6053098, 0x11 -- cgit v1.2.3-18-g5258 From d4f7e513234019a005c4d33477189f2a4e53bb9c Mon Sep 17 00:00:00 2001 From: Chris Smith Date: Fri, 12 Nov 2010 16:26:54 +0100 Subject: sh: Enable CONFIG_GCOV_PROFILE_ALL for sh This patch enables gcov kernel profiling over the whole kernel for sh. Profiling of specific files individually already worked. A handful of files have to be explicitly excluded from the profiling to avoid breaking things, notably pmb.c. Signed-off-by: Chris Smith Signed-off-by: Stuart Menefy Signed-off-by: Paul Mundt --- arch/sh/boot/compressed/Makefile | 2 ++ arch/sh/mm/Makefile | 2 ++ 2 files changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/sh/boot/compressed/Makefile b/arch/sh/boot/compressed/Makefile index e0b0293bae6..780e083e4d1 100644 --- a/arch/sh/boot/compressed/Makefile +++ b/arch/sh/boot/compressed/Makefile @@ -11,6 +11,8 @@ targets := vmlinux vmlinux.bin vmlinux.bin.gz \ OBJECTS = $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/cache.o +GCOV_PROFILE := n + # # IMAGE_OFFSET is the load offset of the compression loader # diff --git a/arch/sh/mm/Makefile b/arch/sh/mm/Makefile index 150aa326aff..2228c8cee4d 100644 --- a/arch/sh/mm/Makefile +++ b/arch/sh/mm/Makefile @@ -42,6 +42,8 @@ obj-$(CONFIG_IOREMAP_FIXED) += ioremap_fixed.o obj-$(CONFIG_UNCACHED_MAPPING) += uncached.o obj-$(CONFIG_HAVE_SRAM_POOL) += sram.o +GCOV_PROFILE_pmb.o := n + # Special flags for fault_64.o. This puts restrictions on the number of # caller-save registers that the compiler can target when building this file. # This is required because the code is called from a context in entry.S where -- cgit v1.2.3-18-g5258 From ec6a3df1c008d9e8664e53b0363f6847c5c0dc3f Mon Sep 17 00:00:00 2001 From: Heinz Graalfs Date: Fri, 21 Jan 2011 10:06:52 +0000 Subject: oprofile, s390: Add support for hardware based sampling on System z processors This adds support for hardware based sampling on System z processors (models z10 and up). System z's hardware sampling is described in detail in: SA23-2260-01 "The Load-Program-Parameter and CPU-Measurement Facilities" The patch introduces - support for System z's hardware sampler in OProfile's kernel module - it adds functions that control all hardware sampling related operations as: - checking if hardware sampling feature is available, i.e.: on System z models z10 and up, in LPAR mode only, and authorised during LPAR activation - allocating memory for the hardware sampling feature - starting/stopping hardware sampling All functions required to start and stop hardware sampling have to be invoked by the oprofile kernel module as provided by the other patches of this patch set. In case hardware based sampling cannot be setup standard timer based sampling is used by OProfile. Applied with following changes: * enable compilation in Makefile Signed-off-by: Mahesh Salgaonkar Signed-off-by: Maran Pakkirisamy Signed-off-by: Heinz Graalfs Acked-by: Heiko Carstens Signed-off-by: Robert Richter --- arch/Kconfig | 3 + arch/s390/Kconfig | 1 + arch/s390/oprofile/Makefile | 2 +- arch/s390/oprofile/hwsampler.c | 1256 ++++++++++++++++++++++++++++++++++++++++ arch/s390/oprofile/hwsampler.h | 113 ++++ 5 files changed, 1374 insertions(+), 1 deletion(-) create mode 100644 arch/s390/oprofile/hwsampler.c create mode 100644 arch/s390/oprofile/hwsampler.h (limited to 'arch') diff --git a/arch/Kconfig b/arch/Kconfig index f78c2be4242..43abf3c6da8 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -30,6 +30,9 @@ config OPROFILE_EVENT_MULTIPLEX config HAVE_OPROFILE bool +config HAVE_HWSAMPLER + bool + config KPROBES bool "Kprobes" depends on MODULES diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index ff19efdf6fe..0cf20adfbb4 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -115,6 +115,7 @@ config S390 select ARCH_INLINE_WRITE_UNLOCK_BH select ARCH_INLINE_WRITE_UNLOCK_IRQ select ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE + select HAVE_HWSAMPLER config SCHED_OMIT_FRAME_POINTER def_bool y diff --git a/arch/s390/oprofile/Makefile b/arch/s390/oprofile/Makefile index 537b2d840e6..d698cddcfbd 100644 --- a/arch/s390/oprofile/Makefile +++ b/arch/s390/oprofile/Makefile @@ -6,4 +6,4 @@ DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \ oprofilefs.o oprofile_stats.o \ timer_int.o ) -oprofile-y := $(DRIVER_OBJS) init.o backtrace.o +oprofile-y := $(DRIVER_OBJS) init.o backtrace.o hwsampler.o diff --git a/arch/s390/oprofile/hwsampler.c b/arch/s390/oprofile/hwsampler.c new file mode 100644 index 00000000000..ab3f770e35b --- /dev/null +++ b/arch/s390/oprofile/hwsampler.c @@ -0,0 +1,1256 @@ +/** + * arch/s390/oprofile/hwsampler.c + * + * Copyright IBM Corp. 2010 + * Author: Heinz Graalfs + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "hwsampler.h" + +#define MAX_NUM_SDB 511 +#define MIN_NUM_SDB 1 + +#define ALERT_REQ_MASK 0x4000000000000000ul +#define BUFFER_FULL_MASK 0x8000000000000000ul + +#define EI_IEA (1 << 31) /* invalid entry address */ +#define EI_ISE (1 << 30) /* incorrect SDBT entry */ +#define EI_PRA (1 << 29) /* program request alert */ +#define EI_SACA (1 << 23) /* sampler authorization change alert */ +#define EI_LSDA (1 << 22) /* loss of sample data alert */ + +DECLARE_PER_CPU(struct hws_cpu_buffer, sampler_cpu_buffer); + +struct hws_execute_parms { + void *buffer; + signed int rc; +}; + +DEFINE_PER_CPU(struct hws_cpu_buffer, sampler_cpu_buffer); +EXPORT_PER_CPU_SYMBOL(sampler_cpu_buffer); + +static DEFINE_MUTEX(hws_sem); +static DEFINE_MUTEX(hws_sem_oom); + +static unsigned char hws_flush_all; +static unsigned int hws_oom; +static struct workqueue_struct *hws_wq; + +static unsigned int hws_state; +enum { + HWS_INIT = 1, + HWS_DEALLOCATED, + HWS_STOPPED, + HWS_STARTED, + HWS_STOPPING }; + +/* set to 1 if called by kernel during memory allocation */ +static unsigned char oom_killer_was_active; +/* size of SDBT and SDB as of allocate API */ +static unsigned long num_sdbt = 100; +static unsigned long num_sdb = 511; +/* sampling interval (machine cycles) */ +static unsigned long interval; + +static unsigned long min_sampler_rate; +static unsigned long max_sampler_rate; + +static int ssctl(void *buffer) +{ + int cc; + + /* set in order to detect a program check */ + cc = 1; + + asm volatile( + "0: .insn s,0xB2870000,0(%1)\n" + "1: ipm %0\n" + " srl %0,28\n" + "2:\n" + EX_TABLE(0b, 2b) EX_TABLE(1b, 2b) + : "+d" (cc), "+a" (buffer) + : "m" (*((struct hws_ssctl_request_block *)buffer)) + : "cc", "memory"); + + return cc ? -EINVAL : 0 ; +} + +static int qsi(void *buffer) +{ + int cc; + cc = 1; + + asm volatile( + "0: .insn s,0xB2860000,0(%1)\n" + "1: lhi %0,0\n" + "2:\n" + EX_TABLE(0b, 2b) EX_TABLE(1b, 2b) + : "=d" (cc), "+a" (buffer) + : "m" (*((struct hws_qsi_info_block *)buffer)) + : "cc", "memory"); + + return cc ? -EINVAL : 0; +} + +static void execute_qsi(void *parms) +{ + struct hws_execute_parms *ep = parms; + + ep->rc = qsi(ep->buffer); +} + +static void execute_ssctl(void *parms) +{ + struct hws_execute_parms *ep = parms; + + ep->rc = ssctl(ep->buffer); +} + +static int smp_ctl_ssctl_stop(int cpu) +{ + int rc; + struct hws_execute_parms ep; + struct hws_cpu_buffer *cb; + + cb = &per_cpu(sampler_cpu_buffer, cpu); + + cb->ssctl.es = 0; + cb->ssctl.cs = 0; + + ep.buffer = &cb->ssctl; + smp_call_function_single(cpu, execute_ssctl, &ep, 1); + rc = ep.rc; + if (rc) { + printk(KERN_ERR "hwsampler: CPU %d CPUMF SSCTL failed.\n", cpu); + dump_stack(); + } + + ep.buffer = &cb->qsi; + smp_call_function_single(cpu, execute_qsi, &ep, 1); + + if (cb->qsi.es || cb->qsi.cs) { + printk(KERN_EMERG "CPUMF sampling did not stop properly.\n"); + dump_stack(); + } + + return rc; +} + +static int smp_ctl_ssctl_deactivate(int cpu) +{ + int rc; + struct hws_execute_parms ep; + struct hws_cpu_buffer *cb; + + cb = &per_cpu(sampler_cpu_buffer, cpu); + + cb->ssctl.es = 1; + cb->ssctl.cs = 0; + + ep.buffer = &cb->ssctl; + smp_call_function_single(cpu, execute_ssctl, &ep, 1); + rc = ep.rc; + if (rc) + printk(KERN_ERR "hwsampler: CPU %d CPUMF SSCTL failed.\n", cpu); + + ep.buffer = &cb->qsi; + smp_call_function_single(cpu, execute_qsi, &ep, 1); + + if (cb->qsi.cs) + printk(KERN_EMERG "CPUMF sampling was not set inactive.\n"); + + return rc; +} + +static int smp_ctl_ssctl_enable_activate(int cpu, unsigned long interval) +{ + int rc; + struct hws_execute_parms ep; + struct hws_cpu_buffer *cb; + + cb = &per_cpu(sampler_cpu_buffer, cpu); + + cb->ssctl.h = 1; + cb->ssctl.tear = cb->first_sdbt; + cb->ssctl.dear = *(unsigned long *) cb->first_sdbt; + cb->ssctl.interval = interval; + cb->ssctl.es = 1; + cb->ssctl.cs = 1; + + ep.buffer = &cb->ssctl; + smp_call_function_single(cpu, execute_ssctl, &ep, 1); + rc = ep.rc; + if (rc) + printk(KERN_ERR "hwsampler: CPU %d CPUMF SSCTL failed.\n", cpu); + + ep.buffer = &cb->qsi; + smp_call_function_single(cpu, execute_qsi, &ep, 1); + if (ep.rc) + printk(KERN_ERR "hwsampler: CPU %d CPUMF QSI failed.\n", cpu); + + return rc; +} + +static int smp_ctl_qsi(int cpu) +{ + struct hws_execute_parms ep; + struct hws_cpu_buffer *cb; + + cb = &per_cpu(sampler_cpu_buffer, cpu); + + ep.buffer = &cb->qsi; + smp_call_function_single(cpu, execute_qsi, &ep, 1); + + return ep.rc; +} + +static inline unsigned long *trailer_entry_ptr(unsigned long v) +{ + void *ret; + + ret = (void *)v; + ret += PAGE_SIZE; + ret -= sizeof(struct hws_trailer_entry); + + return (unsigned long *) ret; +} + +/* prototypes for external interrupt handler and worker */ +static void hws_ext_handler(unsigned int ext_int_code, + unsigned int param32, unsigned long param64); + +static void worker(struct work_struct *work); + +static void add_samples_to_oprofile(unsigned cpu, unsigned long *, + unsigned long *dear); + +static void init_all_cpu_buffers(void) +{ + int cpu; + struct hws_cpu_buffer *cb; + + for_each_online_cpu(cpu) { + cb = &per_cpu(sampler_cpu_buffer, cpu); + memset(cb, 0, sizeof(struct hws_cpu_buffer)); + } +} + +static int is_link_entry(unsigned long *s) +{ + return *s & 0x1ul ? 1 : 0; +} + +static unsigned long *get_next_sdbt(unsigned long *s) +{ + return (unsigned long *) (*s & ~0x1ul); +} + +static int prepare_cpu_buffers(void) +{ + int cpu; + int rc; + struct hws_cpu_buffer *cb; + + rc = 0; + for_each_online_cpu(cpu) { + cb = &per_cpu(sampler_cpu_buffer, cpu); + atomic_set(&cb->ext_params, 0); + cb->worker_entry = 0; + cb->sample_overflow = 0; + cb->req_alert = 0; + cb->incorrect_sdbt_entry = 0; + cb->invalid_entry_address = 0; + cb->loss_of_sample_data = 0; + cb->sample_auth_change_alert = 0; + cb->finish = 0; + cb->oom = 0; + cb->stop_mode = 0; + } + + return rc; +} + +/* + * allocate_sdbt() - allocate sampler memory + * @cpu: the cpu for which sampler memory is allocated + * + * A 4K page is allocated for each requested SDBT. + * A maximum of 511 4K pages are allocated for the SDBs in each of the SDBTs. + * Set ALERT_REQ mask in each SDBs trailer. + * Returns zero if successful, <0 otherwise. + */ +static int allocate_sdbt(int cpu) +{ + int j, k, rc; + unsigned long *sdbt; + unsigned long sdb; + unsigned long *tail; + unsigned long *trailer; + struct hws_cpu_buffer *cb; + + cb = &per_cpu(sampler_cpu_buffer, cpu); + + if (cb->first_sdbt) + return -EINVAL; + + sdbt = NULL; + tail = sdbt; + + for (j = 0; j < num_sdbt; j++) { + sdbt = (unsigned long *)get_zeroed_page(GFP_KERNEL); + + mutex_lock(&hws_sem_oom); + /* OOM killer might have been activated */ + barrier(); + if (oom_killer_was_active || !sdbt) { + if (sdbt) + free_page((unsigned long)sdbt); + + goto allocate_sdbt_error; + } + if (cb->first_sdbt == 0) + cb->first_sdbt = (unsigned long)sdbt; + + /* link current page to tail of chain */ + if (tail) + *tail = (unsigned long)(void *)sdbt + 1; + + mutex_unlock(&hws_sem_oom); + + for (k = 0; k < num_sdb; k++) { + /* get and set SDB page */ + sdb = get_zeroed_page(GFP_KERNEL); + + mutex_lock(&hws_sem_oom); + /* OOM killer might have been activated */ + barrier(); + if (oom_killer_was_active || !sdb) { + if (sdb) + free_page(sdb); + + goto allocate_sdbt_error; + } + *sdbt = sdb; + trailer = trailer_entry_ptr(*sdbt); + *trailer = ALERT_REQ_MASK; + sdbt++; + mutex_unlock(&hws_sem_oom); + } + tail = sdbt; + } + mutex_lock(&hws_sem_oom); + if (oom_killer_was_active) + goto allocate_sdbt_error; + + rc = 0; + if (tail) + *tail = (unsigned long) + ((void *)cb->first_sdbt) + 1; + +allocate_sdbt_exit: + mutex_unlock(&hws_sem_oom); + return rc; + +allocate_sdbt_error: + rc = -ENOMEM; + goto allocate_sdbt_exit; +} + +/* + * deallocate_sdbt() - deallocate all sampler memory + * + * For each online CPU all SDBT trees are deallocated. + * Returns the number of freed pages. + */ +static int deallocate_sdbt(void) +{ + int cpu; + int counter; + + counter = 0; + + for_each_online_cpu(cpu) { + unsigned long start; + unsigned long sdbt; + unsigned long *curr; + struct hws_cpu_buffer *cb; + + cb = &per_cpu(sampler_cpu_buffer, cpu); + + if (!cb->first_sdbt) + continue; + + sdbt = cb->first_sdbt; + curr = (unsigned long *) sdbt; + start = sdbt; + + /* we'll free the SDBT after all SDBs are processed... */ + while (1) { + if (!*curr || !sdbt) + break; + + /* watch for link entry reset if found */ + if (is_link_entry(curr)) { + curr = get_next_sdbt(curr); + if (sdbt) + free_page(sdbt); + + /* we are done if we reach the start */ + if ((unsigned long) curr == start) + break; + else + sdbt = (unsigned long) curr; + } else { + /* process SDB pointer */ + if (*curr) { + free_page(*curr); + curr++; + } + } + counter++; + } + cb->first_sdbt = 0; + } + return counter; +} + +static int start_sampling(int cpu) +{ + int rc; + struct hws_cpu_buffer *cb; + + cb = &per_cpu(sampler_cpu_buffer, cpu); + rc = smp_ctl_ssctl_enable_activate(cpu, interval); + if (rc) { + printk(KERN_INFO "hwsampler: CPU %d ssctl failed.\n", cpu); + goto start_exit; + } + + rc = -EINVAL; + if (!cb->qsi.es) { + printk(KERN_INFO "hwsampler: CPU %d ssctl not enabled.\n", cpu); + goto start_exit; + } + + if (!cb->qsi.cs) { + printk(KERN_INFO "hwsampler: CPU %d ssctl not active.\n", cpu); + goto start_exit; + } + + printk(KERN_INFO + "hwsampler: CPU %d, CPUMF Sampling started, interval %lu.\n", + cpu, interval); + + rc = 0; + +start_exit: + return rc; +} + +static int stop_sampling(int cpu) +{ + unsigned long v; + int rc; + struct hws_cpu_buffer *cb; + + rc = smp_ctl_qsi(cpu); + WARN_ON(rc); + + cb = &per_cpu(sampler_cpu_buffer, cpu); + if (!rc && !cb->qsi.es) + printk(KERN_INFO "hwsampler: CPU %d, already stopped.\n", cpu); + + rc = smp_ctl_ssctl_stop(cpu); + if (rc) { + printk(KERN_INFO "hwsampler: CPU %d, ssctl stop error %d.\n", + cpu, rc); + goto stop_exit; + } + + printk(KERN_INFO "hwsampler: CPU %d, CPUMF Sampling stopped.\n", cpu); + +stop_exit: + v = cb->req_alert; + if (v) + printk(KERN_ERR "hwsampler: CPU %d CPUMF Request alert," + " count=%lu.\n", cpu, v); + + v = cb->loss_of_sample_data; + if (v) + printk(KERN_ERR "hwsampler: CPU %d CPUMF Loss of sample data," + " count=%lu.\n", cpu, v); + + v = cb->invalid_entry_address; + if (v) + printk(KERN_ERR "hwsampler: CPU %d CPUMF Invalid entry address," + " count=%lu.\n", cpu, v); + + v = cb->incorrect_sdbt_entry; + if (v) + printk(KERN_ERR + "hwsampler: CPU %d CPUMF Incorrect SDBT address," + " count=%lu.\n", cpu, v); + + v = cb->sample_auth_change_alert; + if (v) + printk(KERN_ERR + "hwsampler: CPU %d CPUMF Sample authorization change," + " count=%lu.\n", cpu, v); + + return rc; +} + +static int check_hardware_prerequisites(void) +{ + unsigned long long facility_bits[2]; + + memcpy(facility_bits, S390_lowcore.stfle_fac_list, 32); + if (!(facility_bits[1] & (1ULL << 59))) + return -EOPNOTSUPP; + + return 0; +} +/* + * hws_oom_callback() - the OOM callback function + * + * In case the callback is invoked during memory allocation for the + * hw sampler, all obtained memory is deallocated and a flag is set + * so main sampler memory allocation can exit with a failure code. + * In case the callback is invoked during sampling the hw sampler + * is deactivated for all CPUs. + */ +static int hws_oom_callback(struct notifier_block *nfb, + unsigned long dummy, void *parm) +{ + unsigned long *freed; + int cpu; + struct hws_cpu_buffer *cb; + + freed = parm; + + mutex_lock(&hws_sem_oom); + + if (hws_state == HWS_DEALLOCATED) { + /* during memory allocation */ + if (oom_killer_was_active == 0) { + oom_killer_was_active = 1; + *freed += deallocate_sdbt(); + } + } else { + int i; + cpu = get_cpu(); + cb = &per_cpu(sampler_cpu_buffer, cpu); + + if (!cb->oom) { + for_each_online_cpu(i) { + smp_ctl_ssctl_deactivate(i); + cb->oom = 1; + } + cb->finish = 1; + + printk(KERN_INFO + "hwsampler: CPU %d, OOM notify during CPUMF Sampling.\n", + cpu); + } + } + + mutex_unlock(&hws_sem_oom); + + return NOTIFY_OK; +} + +static struct notifier_block hws_oom_notifier = { + .notifier_call = hws_oom_callback +}; + +static int __cpuinit hws_cpu_callback(struct notifier_block *nfb, + unsigned long action, void *hcpu) +{ + /* We do not have sampler space available for all possible CPUs. + All CPUs should be online when hw sampling is activated. */ + return NOTIFY_BAD; +} + +static struct notifier_block hws_cpu_notifier = { + .notifier_call = hws_cpu_callback +}; + +/** + * hwsampler_deactivate() - set hardware sampling temporarily inactive + * @cpu: specifies the CPU to be set inactive. + * + * Returns 0 on success, !0 on failure. + */ +int hwsampler_deactivate(unsigned int cpu) +{ + /* + * Deactivate hw sampling temporarily and flush the buffer + * by pushing all the pending samples to oprofile buffer. + * + * This function can be called under one of the following conditions: + * Memory unmap, task is exiting. + */ + int rc; + struct hws_cpu_buffer *cb; + + rc = 0; + mutex_lock(&hws_sem); + + cb = &per_cpu(sampler_cpu_buffer, cpu); + if (hws_state == HWS_STARTED) { + rc = smp_ctl_qsi(cpu); + WARN_ON(rc); + if (cb->qsi.cs) { + rc = smp_ctl_ssctl_deactivate(cpu); + if (rc) { + printk(KERN_INFO + "hwsampler: CPU %d, CPUMF Deactivation failed.\n", cpu); + cb->finish = 1; + hws_state = HWS_STOPPING; + } else { + hws_flush_all = 1; + /* Add work to queue to read pending samples.*/ + queue_work_on(cpu, hws_wq, &cb->worker); + } + } + } + mutex_unlock(&hws_sem); + + if (hws_wq) + flush_workqueue(hws_wq); + + return rc; +} + +/** + * hwsampler_activate() - activate/resume hardware sampling which was deactivated + * @cpu: specifies the CPU to be set active. + * + * Returns 0 on success, !0 on failure. + */ +int hwsampler_activate(unsigned int cpu) +{ + /* + * Re-activate hw sampling. This should be called in pair with + * hwsampler_deactivate(). + */ + int rc; + struct hws_cpu_buffer *cb; + + rc = 0; + mutex_lock(&hws_sem); + + cb = &per_cpu(sampler_cpu_buffer, cpu); + if (hws_state == HWS_STARTED) { + rc = smp_ctl_qsi(cpu); + WARN_ON(rc); + if (!cb->qsi.cs) { + hws_flush_all = 0; + rc = smp_ctl_ssctl_enable_activate(cpu, interval); + if (rc) { + printk(KERN_ERR + "CPU %d, CPUMF activate sampling failed.\n", + cpu); + } + } + } + + mutex_unlock(&hws_sem); + + return rc; +} + +static void hws_ext_handler(unsigned int ext_int_code, + unsigned int param32, unsigned long param64) +{ + int cpu; + struct hws_cpu_buffer *cb; + + cpu = smp_processor_id(); + cb = &per_cpu(sampler_cpu_buffer, cpu); + + atomic_xchg( + &cb->ext_params, + atomic_read(&cb->ext_params) + | S390_lowcore.ext_params); + + if (hws_wq) + queue_work(hws_wq, &cb->worker); +} + +static int check_qsi_on_setup(void) +{ + int rc; + unsigned int cpu; + struct hws_cpu_buffer *cb; + + for_each_online_cpu(cpu) { + cb = &per_cpu(sampler_cpu_buffer, cpu); + rc = smp_ctl_qsi(cpu); + WARN_ON(rc); + if (rc) + return -EOPNOTSUPP; + + if (!cb->qsi.as) { + printk(KERN_INFO "hwsampler: CPUMF sampling is not authorized.\n"); + return -EINVAL; + } + + if (cb->qsi.es) { + printk(KERN_WARNING "hwsampler: CPUMF is still enabled.\n"); + rc = smp_ctl_ssctl_stop(cpu); + if (rc) + return -EINVAL; + + printk(KERN_INFO + "CPU %d, CPUMF Sampling stopped now.\n", cpu); + } + } + return 0; +} + +static int check_qsi_on_start(void) +{ + unsigned int cpu; + int rc; + struct hws_cpu_buffer *cb; + + for_each_online_cpu(cpu) { + cb = &per_cpu(sampler_cpu_buffer, cpu); + rc = smp_ctl_qsi(cpu); + WARN_ON(rc); + + if (!cb->qsi.as) + return -EINVAL; + + if (cb->qsi.es) + return -EINVAL; + + if (cb->qsi.cs) + return -EINVAL; + } + return 0; +} + +static void worker_on_start(unsigned int cpu) +{ + struct hws_cpu_buffer *cb; + + cb = &per_cpu(sampler_cpu_buffer, cpu); + cb->worker_entry = cb->first_sdbt; +} + +static int worker_check_error(unsigned int cpu, int ext_params) +{ + int rc; + unsigned long *sdbt; + struct hws_cpu_buffer *cb; + + rc = 0; + cb = &per_cpu(sampler_cpu_buffer, cpu); + sdbt = (unsigned long *) cb->worker_entry; + + if (!sdbt || !*sdbt) + return -EINVAL; + + if (ext_params & EI_IEA) + cb->req_alert++; + + if (ext_params & EI_LSDA) + cb->loss_of_sample_data++; + + if (ext_params & EI_IEA) { + cb->invalid_entry_address++; + rc = -EINVAL; + } + + if (ext_params & EI_ISE) { + cb->incorrect_sdbt_entry++; + rc = -EINVAL; + } + + if (ext_params & EI_SACA) { + cb->sample_auth_change_alert++; + rc = -EINVAL; + } + + return rc; +} + +static void worker_on_finish(unsigned int cpu) +{ + int rc, i; + struct hws_cpu_buffer *cb; + + cb = &per_cpu(sampler_cpu_buffer, cpu); + + if (cb->finish) { + rc = smp_ctl_qsi(cpu); + WARN_ON(rc); + if (cb->qsi.es) { + printk(KERN_INFO + "hwsampler: CPU %d, CPUMF Stop/Deactivate sampling.\n", + cpu); + rc = smp_ctl_ssctl_stop(cpu); + if (rc) + printk(KERN_INFO + "hwsampler: CPU %d, CPUMF Deactivation failed.\n", + cpu); + + for_each_online_cpu(i) { + if (i == cpu) + continue; + if (!cb->finish) { + cb->finish = 1; + queue_work_on(i, hws_wq, + &cb->worker); + } + } + } + } +} + +static void worker_on_interrupt(unsigned int cpu) +{ + unsigned long *sdbt; + unsigned char done; + struct hws_cpu_buffer *cb; + + cb = &per_cpu(sampler_cpu_buffer, cpu); + + sdbt = (unsigned long *) cb->worker_entry; + + done = 0; + /* do not proceed if stop was entered, + * forget the buffers not yet processed */ + while (!done && !cb->stop_mode) { + unsigned long *trailer; + struct hws_trailer_entry *te; + unsigned long *dear = 0; + + trailer = trailer_entry_ptr(*sdbt); + /* leave loop if no more work to do */ + if (!(*trailer & BUFFER_FULL_MASK)) { + done = 1; + if (!hws_flush_all) + continue; + } + + te = (struct hws_trailer_entry *)trailer; + cb->sample_overflow += te->overflow; + + add_samples_to_oprofile(cpu, sdbt, dear); + + /* reset trailer */ + xchg((unsigned char *) te, 0x40); + + /* advance to next sdb slot in current sdbt */ + sdbt++; + /* in case link bit is set use address w/o link bit */ + if (is_link_entry(sdbt)) + sdbt = get_next_sdbt(sdbt); + + cb->worker_entry = (unsigned long)sdbt; + } +} + +static void add_samples_to_oprofile(unsigned int cpu, unsigned long *sdbt, + unsigned long *dear) +{ + struct hws_data_entry *sample_data_ptr; + unsigned long *trailer; + + trailer = trailer_entry_ptr(*sdbt); + if (dear) { + if (dear > trailer) + return; + trailer = dear; + } + + sample_data_ptr = (struct hws_data_entry *)(*sdbt); + + while ((unsigned long *)sample_data_ptr < trailer) { + struct pt_regs *regs = NULL; + struct task_struct *tsk = NULL; + + /* + * Check sampling mode, 1 indicates basic (=customer) sampling + * mode. + */ + if (sample_data_ptr->def != 1) { + /* sample slot is not yet written */ + break; + } else { + /* make sure we don't use it twice, + * the next time the sampler will set it again */ + sample_data_ptr->def = 0; + } + + /* Get pt_regs. */ + if (sample_data_ptr->P == 1) { + /* userspace sample */ + unsigned int pid = sample_data_ptr->prim_asn; + rcu_read_lock(); + tsk = pid_task(find_vpid(pid), PIDTYPE_PID); + if (tsk) + regs = task_pt_regs(tsk); + rcu_read_unlock(); + } else { + /* kernelspace sample */ + regs = task_pt_regs(current); + } + + mutex_lock(&hws_sem); + oprofile_add_ext_hw_sample(sample_data_ptr->ia, regs, 0, + !sample_data_ptr->P, tsk); + mutex_unlock(&hws_sem); + + sample_data_ptr++; + } +} + +static void worker(struct work_struct *work) +{ + unsigned int cpu; + int ext_params; + struct hws_cpu_buffer *cb; + + cb = container_of(work, struct hws_cpu_buffer, worker); + cpu = smp_processor_id(); + ext_params = atomic_xchg(&cb->ext_params, 0); + + if (!cb->worker_entry) + worker_on_start(cpu); + + if (worker_check_error(cpu, ext_params)) + return; + + if (!cb->finish) + worker_on_interrupt(cpu); + + if (cb->finish) + worker_on_finish(cpu); +} + +/** + * hwsampler_allocate() - allocate memory for the hardware sampler + * @sdbt: number of SDBTs per online CPU (must be > 0) + * @sdb: number of SDBs per SDBT (minimum 1, maximum 511) + * + * Returns 0 on success, !0 on failure. + */ +int hwsampler_allocate(unsigned long sdbt, unsigned long sdb) +{ + int cpu, rc; + mutex_lock(&hws_sem); + + rc = -EINVAL; + if (hws_state != HWS_DEALLOCATED) + goto allocate_exit; + + if (sdbt < 1) + goto allocate_exit; + + if (sdb > MAX_NUM_SDB || sdb < MIN_NUM_SDB) + goto allocate_exit; + + num_sdbt = sdbt; + num_sdb = sdb; + + oom_killer_was_active = 0; + register_oom_notifier(&hws_oom_notifier); + + for_each_online_cpu(cpu) { + if (allocate_sdbt(cpu)) { + unregister_oom_notifier(&hws_oom_notifier); + goto allocate_error; + } + } + unregister_oom_notifier(&hws_oom_notifier); + if (oom_killer_was_active) + goto allocate_error; + + hws_state = HWS_STOPPED; + rc = 0; + +allocate_exit: + mutex_unlock(&hws_sem); + return rc; + +allocate_error: + rc = -ENOMEM; + printk(KERN_ERR "hwsampler: CPUMF Memory allocation failed.\n"); + goto allocate_exit; +} + +/** + * hwsampler_deallocate() - deallocate hardware sampler memory + * + * Returns 0 on success, !0 on failure. + */ +int hwsampler_deallocate() +{ + int rc; + + mutex_lock(&hws_sem); + + rc = -EINVAL; + if (hws_state != HWS_STOPPED) + goto deallocate_exit; + + smp_ctl_clear_bit(0, 5); /* set bit 58 CR0 off */ + deallocate_sdbt(); + + hws_state = HWS_DEALLOCATED; + rc = 0; + +deallocate_exit: + mutex_unlock(&hws_sem); + + return rc; +} + +long hwsampler_query_min_interval(void) +{ + if (min_sampler_rate) + return min_sampler_rate; + else + return -EINVAL; +} + +long hwsampler_query_max_interval(void) +{ + if (max_sampler_rate) + return max_sampler_rate; + else + return -EINVAL; +} + +unsigned long hwsampler_get_sample_overflow_count(unsigned int cpu) +{ + struct hws_cpu_buffer *cb; + + cb = &per_cpu(sampler_cpu_buffer, cpu); + + return cb->sample_overflow; +} + +int hwsampler_setup() +{ + int rc; + int cpu; + struct hws_cpu_buffer *cb; + + mutex_lock(&hws_sem); + + rc = -EINVAL; + if (hws_state) + goto setup_exit; + + hws_state = HWS_INIT; + + init_all_cpu_buffers(); + + rc = check_hardware_prerequisites(); + if (rc) + goto setup_exit; + + rc = check_qsi_on_setup(); + if (rc) + goto setup_exit; + + rc = -EINVAL; + hws_wq = create_workqueue("hwsampler"); + if (!hws_wq) + goto setup_exit; + + register_cpu_notifier(&hws_cpu_notifier); + + for_each_online_cpu(cpu) { + cb = &per_cpu(sampler_cpu_buffer, cpu); + INIT_WORK(&cb->worker, worker); + rc = smp_ctl_qsi(cpu); + WARN_ON(rc); + if (min_sampler_rate != cb->qsi.min_sampl_rate) { + if (min_sampler_rate) { + printk(KERN_WARNING + "hwsampler: different min sampler rate values.\n"); + if (min_sampler_rate < cb->qsi.min_sampl_rate) + min_sampler_rate = + cb->qsi.min_sampl_rate; + } else + min_sampler_rate = cb->qsi.min_sampl_rate; + } + if (max_sampler_rate != cb->qsi.max_sampl_rate) { + if (max_sampler_rate) { + printk(KERN_WARNING + "hwsampler: different max sampler rate values.\n"); + if (max_sampler_rate > cb->qsi.max_sampl_rate) + max_sampler_rate = + cb->qsi.max_sampl_rate; + } else + max_sampler_rate = cb->qsi.max_sampl_rate; + } + } + register_external_interrupt(0x1407, hws_ext_handler); + + hws_state = HWS_DEALLOCATED; + rc = 0; + +setup_exit: + mutex_unlock(&hws_sem); + return rc; +} + +int hwsampler_shutdown() +{ + int rc; + + mutex_lock(&hws_sem); + + rc = -EINVAL; + if (hws_state == HWS_DEALLOCATED || hws_state == HWS_STOPPED) { + mutex_unlock(&hws_sem); + + if (hws_wq) + flush_workqueue(hws_wq); + + mutex_lock(&hws_sem); + + if (hws_state == HWS_STOPPED) { + smp_ctl_clear_bit(0, 5); /* set bit 58 CR0 off */ + deallocate_sdbt(); + } + if (hws_wq) { + destroy_workqueue(hws_wq); + hws_wq = NULL; + } + + unregister_external_interrupt(0x1407, hws_ext_handler); + hws_state = HWS_INIT; + rc = 0; + } + mutex_unlock(&hws_sem); + + unregister_cpu_notifier(&hws_cpu_notifier); + + return rc; +} + +/** + * hwsampler_start_all() - start hardware sampling on all online CPUs + * @rate: specifies the used interval when samples are taken + * + * Returns 0 on success, !0 on failure. + */ +int hwsampler_start_all(unsigned long rate) +{ + int rc, cpu; + + mutex_lock(&hws_sem); + + hws_oom = 0; + + rc = -EINVAL; + if (hws_state != HWS_STOPPED) + goto start_all_exit; + + interval = rate; + + /* fail if rate is not valid */ + if (interval < min_sampler_rate || interval > max_sampler_rate) + goto start_all_exit; + + rc = check_qsi_on_start(); + if (rc) + goto start_all_exit; + + rc = prepare_cpu_buffers(); + if (rc) + goto start_all_exit; + + for_each_online_cpu(cpu) { + rc = start_sampling(cpu); + if (rc) + break; + } + if (rc) { + for_each_online_cpu(cpu) { + stop_sampling(cpu); + } + goto start_all_exit; + } + hws_state = HWS_STARTED; + rc = 0; + +start_all_exit: + mutex_unlock(&hws_sem); + + if (rc) + return rc; + + register_oom_notifier(&hws_oom_notifier); + hws_oom = 1; + hws_flush_all = 0; + /* now let them in, 1407 CPUMF external interrupts */ + smp_ctl_set_bit(0, 5); /* set CR0 bit 58 */ + + return 0; +} + +/** + * hwsampler_stop_all() - stop hardware sampling on all online CPUs + * + * Returns 0 on success, !0 on failure. + */ +int hwsampler_stop_all() +{ + int tmp_rc, rc, cpu; + struct hws_cpu_buffer *cb; + + mutex_lock(&hws_sem); + + rc = 0; + if (hws_state == HWS_INIT) { + mutex_unlock(&hws_sem); + return rc; + } + hws_state = HWS_STOPPING; + mutex_unlock(&hws_sem); + + for_each_online_cpu(cpu) { + cb = &per_cpu(sampler_cpu_buffer, cpu); + cb->stop_mode = 1; + tmp_rc = stop_sampling(cpu); + if (tmp_rc) + rc = tmp_rc; + } + + if (hws_wq) + flush_workqueue(hws_wq); + + mutex_lock(&hws_sem); + if (hws_oom) { + unregister_oom_notifier(&hws_oom_notifier); + hws_oom = 0; + } + hws_state = HWS_STOPPED; + mutex_unlock(&hws_sem); + + return rc; +} diff --git a/arch/s390/oprofile/hwsampler.h b/arch/s390/oprofile/hwsampler.h new file mode 100644 index 00000000000..8c72b59316b --- /dev/null +++ b/arch/s390/oprofile/hwsampler.h @@ -0,0 +1,113 @@ +/* + * CPUMF HW sampler functions and internal structures + * + * Copyright IBM Corp. 2010 + * Author(s): Heinz Graalfs + */ + +#ifndef HWSAMPLER_H_ +#define HWSAMPLER_H_ + +#include + +struct hws_qsi_info_block /* QUERY SAMPLING information block */ +{ /* Bit(s) */ + unsigned int b0_13:14; /* 0-13: zeros */ + unsigned int as:1; /* 14: sampling authorisation control*/ + unsigned int b15_21:7; /* 15-21: zeros */ + unsigned int es:1; /* 22: sampling enable control */ + unsigned int b23_29:7; /* 23-29: zeros */ + unsigned int cs:1; /* 30: sampling activation control */ + unsigned int:1; /* 31: reserved */ + unsigned int bsdes:16; /* 4-5: size of sampling entry */ + unsigned int:16; /* 6-7: reserved */ + unsigned long min_sampl_rate; /* 8-15: minimum sampling interval */ + unsigned long max_sampl_rate; /* 16-23: maximum sampling interval*/ + unsigned long tear; /* 24-31: TEAR contents */ + unsigned long dear; /* 32-39: DEAR contents */ + unsigned int rsvrd0; /* 40-43: reserved */ + unsigned int cpu_speed; /* 44-47: CPU speed */ + unsigned long long rsvrd1; /* 48-55: reserved */ + unsigned long long rsvrd2; /* 56-63: reserved */ +}; + +struct hws_ssctl_request_block /* SET SAMPLING CONTROLS req block */ +{ /* bytes 0 - 7 Bit(s) */ + unsigned int s:1; /* 0: maximum buffer indicator */ + unsigned int h:1; /* 1: part. level reserved for VM use*/ + unsigned long b2_53:52; /* 2-53: zeros */ + unsigned int es:1; /* 54: sampling enable control */ + unsigned int b55_61:7; /* 55-61: - zeros */ + unsigned int cs:1; /* 62: sampling activation control */ + unsigned int b63:1; /* 63: zero */ + unsigned long interval; /* 8-15: sampling interval */ + unsigned long tear; /* 16-23: TEAR contents */ + unsigned long dear; /* 24-31: DEAR contents */ + /* 32-63: */ + unsigned long rsvrd1; /* reserved */ + unsigned long rsvrd2; /* reserved */ + unsigned long rsvrd3; /* reserved */ + unsigned long rsvrd4; /* reserved */ +}; + +struct hws_cpu_buffer { + unsigned long first_sdbt; /* @ of 1st SDB-Table for this CP*/ + unsigned long worker_entry; + unsigned long sample_overflow; /* taken from SDB ... */ + struct hws_qsi_info_block qsi; + struct hws_ssctl_request_block ssctl; + struct work_struct worker; + atomic_t ext_params; + unsigned long req_alert; + unsigned long loss_of_sample_data; + unsigned long invalid_entry_address; + unsigned long incorrect_sdbt_entry; + unsigned long sample_auth_change_alert; + unsigned int finish:1; + unsigned int oom:1; + unsigned int stop_mode:1; +}; + +struct hws_data_entry { + unsigned int def:16; /* 0-15 Data Entry Format */ + unsigned int R:4; /* 16-19 reserved */ + unsigned int U:4; /* 20-23 Number of unique instruct. */ + unsigned int z:2; /* zeros */ + unsigned int T:1; /* 26 PSW DAT mode */ + unsigned int W:1; /* 27 PSW wait state */ + unsigned int P:1; /* 28 PSW Problem state */ + unsigned int AS:2; /* 29-30 PSW address-space control */ + unsigned int I:1; /* 31 entry valid or invalid */ + unsigned int:16; + unsigned int prim_asn:16; /* primary ASN */ + unsigned long long ia; /* Instruction Address */ + unsigned long long lpp; /* Logical-Partition Program Param. */ + unsigned long long vpp; /* Virtual-Machine Program Param. */ +}; + +struct hws_trailer_entry { + unsigned int f:1; /* 0 - Block Full Indicator */ + unsigned int a:1; /* 1 - Alert request control */ + unsigned long:62; /* 2 - 63: Reserved */ + unsigned long overflow; /* 64 - sample Overflow count */ + unsigned long timestamp; /* 16 - time-stamp */ + unsigned long timestamp1; /* */ + unsigned long reserved1; /* 32 -Reserved */ + unsigned long reserved2; /* */ + unsigned long progusage1; /* 48 - reserved for programming use */ + unsigned long progusage2; /* */ +}; + +int hwsampler_setup(void); +int hwsampler_shutdown(void); +int hwsampler_allocate(unsigned long sdbt, unsigned long sdb); +int hwsampler_deallocate(void); +long hwsampler_query_min_interval(void); +long hwsampler_query_max_interval(void); +int hwsampler_start_all(unsigned long interval); +int hwsampler_stop_all(void); +int hwsampler_deactivate(unsigned int cpu); +int hwsampler_activate(unsigned int cpu); +unsigned long hwsampler_get_sample_overflow_count(unsigned int cpu); + +#endif /*HWSAMPLER_H_*/ -- cgit v1.2.3-18-g5258 From 997dbb4967da248808850c250182ef2528fff2d1 Mon Sep 17 00:00:00 2001 From: Heinz Graalfs Date: Fri, 21 Jan 2011 10:06:53 +0000 Subject: oprofile, s390: Enhance OProfile to support System zs hardware sampling feature OProfile is enhanced to export all files for controlling System z's hardware sampling, and to invoke hwsampler exported functions to initialize and use System z's hardware sampling. The patch invokes hwsampler_setup() during oprofile init and exports following hwsampler files under oprofilefs if hwsampler's setup succeeded: A new directory for hardware sampling based files /dev/oprofile/hwsampling/ The userland daemon must explicitly write to the following files to disable (or enable) hardware based sampling /dev/oprofile/hwsampling/hwsampler to modify the actual sampling rate /dev/oprofile/hwsampling/hw_interval to modify the amount of sampling memory (measured in 4K pages) /dev/oprofile/hwsampling/hw_sdbt_blocks The following files are read only and show the possible minimum sampling rate /dev/oprofile/hwsampling/hw_min_interval the possible maximum sampling rate /dev/oprofile/hwsampling/hw_max_interval The patch splits the oprofile_timer_[init/exit] function so that it can be also called through user context (oprofilefs) to avoid kernel oops. Applied with following changes: * whitespace changes in Makefile and timer_int.c Signed-off-by: Mahesh Salgaonkar Signed-off-by: Maran Pakkirisamy Signed-off-by: Heinz Graalfs Acked-by: Heiko Carstens Signed-off-by: Robert Richter --- arch/s390/oprofile/Makefile | 2 +- arch/s390/oprofile/hwsampler_files.c | 146 +++++++++++++++++++++++++++++++++++ arch/s390/oprofile/init.c | 7 +- 3 files changed, 153 insertions(+), 2 deletions(-) create mode 100644 arch/s390/oprofile/hwsampler_files.c (limited to 'arch') diff --git a/arch/s390/oprofile/Makefile b/arch/s390/oprofile/Makefile index d698cddcfbd..00d8fc8e442 100644 --- a/arch/s390/oprofile/Makefile +++ b/arch/s390/oprofile/Makefile @@ -6,4 +6,4 @@ DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \ oprofilefs.o oprofile_stats.o \ timer_int.o ) -oprofile-y := $(DRIVER_OBJS) init.o backtrace.o hwsampler.o +oprofile-y := $(DRIVER_OBJS) init.o backtrace.o hwsampler.o hwsampler_files.o diff --git a/arch/s390/oprofile/hwsampler_files.c b/arch/s390/oprofile/hwsampler_files.c new file mode 100644 index 00000000000..493f7cc4e86 --- /dev/null +++ b/arch/s390/oprofile/hwsampler_files.c @@ -0,0 +1,146 @@ +/** + * arch/s390/oprofile/hwsampler_files.c + * + * Copyright IBM Corp. 2010 + * Author: Mahesh Salgaonkar (mahesh@linux.vnet.ibm.com) + */ +#include +#include +#include + +#include "hwsampler.h" + +#define DEFAULT_INTERVAL 4096 + +#define DEFAULT_SDBT_BLOCKS 1 +#define DEFAULT_SDB_BLOCKS 511 + +static unsigned long oprofile_hw_interval = DEFAULT_INTERVAL; +static unsigned long oprofile_min_interval; +static unsigned long oprofile_max_interval; + +static unsigned long oprofile_sdbt_blocks = DEFAULT_SDBT_BLOCKS; +static unsigned long oprofile_sdb_blocks = DEFAULT_SDB_BLOCKS; + +static unsigned long oprofile_hwsampler; + +static int oprofile_hwsampler_start(void) +{ + int retval; + + retval = hwsampler_allocate(oprofile_sdbt_blocks, oprofile_sdb_blocks); + if (retval) + return retval; + + retval = hwsampler_start_all(oprofile_hw_interval); + if (retval) + hwsampler_deallocate(); + + return retval; +} + +static void oprofile_hwsampler_stop(void) +{ + hwsampler_stop_all(); + hwsampler_deallocate(); + return; +} + +int oprofile_arch_set_hwsampler(struct oprofile_operations *ops) +{ + printk(KERN_INFO "oprofile: using hardware sampling\n"); + ops->start = oprofile_hwsampler_start; + ops->stop = oprofile_hwsampler_stop; + ops->cpu_type = "timer"; + + return 0; +} + +static ssize_t hwsampler_read(struct file *file, char __user *buf, + size_t count, loff_t *offset) +{ + return oprofilefs_ulong_to_user(oprofile_hwsampler, buf, count, offset); +} + +static ssize_t hwsampler_write(struct file *file, char const __user *buf, + size_t count, loff_t *offset) +{ + unsigned long val; + int retval; + + if (*offset) + return -EINVAL; + + retval = oprofilefs_ulong_from_user(&val, buf, count); + if (retval) + return retval; + + if (oprofile_hwsampler == val) + return -EINVAL; + + retval = oprofile_set_hwsampler(val); + + if (retval) + return retval; + + oprofile_hwsampler = val; + return count; +} + +static const struct file_operations hwsampler_fops = { + .read = hwsampler_read, + .write = hwsampler_write, +}; + +static int oprofile_create_hwsampling_files(struct super_block *sb, + struct dentry *root) +{ + struct dentry *hw_dir; + + /* reinitialize default values */ + oprofile_hwsampler = 1; + + hw_dir = oprofilefs_mkdir(sb, root, "hwsampling"); + if (!hw_dir) + return -EINVAL; + + oprofilefs_create_file(sb, hw_dir, "hwsampler", &hwsampler_fops); + oprofilefs_create_ulong(sb, hw_dir, "hw_interval", + &oprofile_hw_interval); + oprofilefs_create_ro_ulong(sb, hw_dir, "hw_min_interval", + &oprofile_min_interval); + oprofilefs_create_ro_ulong(sb, hw_dir, "hw_max_interval", + &oprofile_max_interval); + oprofilefs_create_ulong(sb, hw_dir, "hw_sdbt_blocks", + &oprofile_sdbt_blocks); + + return 0; +} + +int oprofile_hwsampler_init(struct oprofile_operations* ops) +{ + if (hwsampler_setup()) + return -ENODEV; + + /* + * create hwsampler files only if hwsampler_setup() succeeds. + */ + ops->create_files = oprofile_create_hwsampling_files; + oprofile_min_interval = hwsampler_query_min_interval(); + if (oprofile_min_interval < 0) { + oprofile_min_interval = 0; + return -ENODEV; + } + oprofile_max_interval = hwsampler_query_max_interval(); + if (oprofile_max_interval < 0) { + oprofile_max_interval = 0; + return -ENODEV; + } + oprofile_arch_set_hwsampler(ops); + return 0; +} + +void oprofile_hwsampler_exit(void) +{ + hwsampler_shutdown(); +} diff --git a/arch/s390/oprofile/init.c b/arch/s390/oprofile/init.c index 7a995113b91..f6b3f724f59 100644 --- a/arch/s390/oprofile/init.c +++ b/arch/s390/oprofile/init.c @@ -11,16 +11,21 @@ #include #include #include +#include +extern int oprofile_hwsampler_init(struct oprofile_operations* ops); +extern void oprofile_hwsampler_exit(void); extern void s390_backtrace(struct pt_regs * const regs, unsigned int depth); int __init oprofile_arch_init(struct oprofile_operations* ops) { ops->backtrace = s390_backtrace; - return -ENODEV; + + return oprofile_hwsampler_init(ops); } void oprofile_arch_exit(void) { + oprofile_hwsampler_exit(); } -- cgit v1.2.3-18-g5258 From a0d76247e07abd14968adc4486aaa8e270e9c209 Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Fri, 11 Feb 2011 17:31:44 +0100 Subject: oprofile, s390: Rework hwsampler implementation This patch is a rework of the hwsampler oprofile implementation that has been applied recently. Now there are less non-architectural changes. The only changes are: * introduction of oprofile_add_ext_hw_sample(), and * removal of section attributes of oprofile_timer_init/_exit(). To setup hwsampler for oprofile we need to modify start()/stop() callbacks and additional hwsampler control files in oprofilefs. We do not reinitialize the timer or hwsampler mode by restarting calling init/exit() anymore, instead hwsampler_running is used to switch the mode directly in oprofile_hwsampler_start/_stop(). For locking reasons there is also hwsampler_file that reflects the value in oprofilefs. The overall diffstat of the oprofile s390 hwsampler implemenation shows the low impact to non-architectural code: arch/Kconfig | 3 + arch/s390/Kconfig | 1 + arch/s390/oprofile/Makefile | 2 +- arch/s390/oprofile/hwsampler.c | 1256 ++++++++++++++++++++++++++++++++++ arch/s390/oprofile/hwsampler.h | 113 +++ arch/s390/oprofile/hwsampler_files.c | 162 +++++ arch/s390/oprofile/init.c | 6 +- drivers/oprofile/cpu_buffer.c | 24 +- drivers/oprofile/timer_int.c | 4 +- include/linux/oprofile.h | 7 + 10 files changed, 1567 insertions(+), 11 deletions(-) Acked-by: Heiko Carstens Signed-off-by: Robert Richter --- arch/s390/oprofile/hwsampler_files.c | 60 +++++++++++++++++++++++------------- arch/s390/oprofile/init.c | 1 - 2 files changed, 38 insertions(+), 23 deletions(-) (limited to 'arch') diff --git a/arch/s390/oprofile/hwsampler_files.c b/arch/s390/oprofile/hwsampler_files.c index 493f7cc4e86..2e1da2449ba 100644 --- a/arch/s390/oprofile/hwsampler_files.c +++ b/arch/s390/oprofile/hwsampler_files.c @@ -8,6 +8,7 @@ #include #include +#include "../../../drivers/oprofile/oprof.h" #include "hwsampler.h" #define DEFAULT_INTERVAL 4096 @@ -22,12 +23,20 @@ static unsigned long oprofile_max_interval; static unsigned long oprofile_sdbt_blocks = DEFAULT_SDBT_BLOCKS; static unsigned long oprofile_sdb_blocks = DEFAULT_SDB_BLOCKS; -static unsigned long oprofile_hwsampler; +static int hwsampler_file; +static int hwsampler_running; /* start_mutex must be held to change */ + +static struct oprofile_operations timer_ops; static int oprofile_hwsampler_start(void) { int retval; + hwsampler_running = hwsampler_file; + + if (!hwsampler_running) + return timer_ops.start(); + retval = hwsampler_allocate(oprofile_sdbt_blocks, oprofile_sdb_blocks); if (retval) return retval; @@ -41,25 +50,20 @@ static int oprofile_hwsampler_start(void) static void oprofile_hwsampler_stop(void) { + if (!hwsampler_running) { + timer_ops.stop(); + return; + } + hwsampler_stop_all(); hwsampler_deallocate(); return; } -int oprofile_arch_set_hwsampler(struct oprofile_operations *ops) -{ - printk(KERN_INFO "oprofile: using hardware sampling\n"); - ops->start = oprofile_hwsampler_start; - ops->stop = oprofile_hwsampler_stop; - ops->cpu_type = "timer"; - - return 0; -} - static ssize_t hwsampler_read(struct file *file, char __user *buf, size_t count, loff_t *offset) { - return oprofilefs_ulong_to_user(oprofile_hwsampler, buf, count, offset); + return oprofilefs_ulong_to_user(hwsampler_file, buf, count, offset); } static ssize_t hwsampler_write(struct file *file, char const __user *buf, @@ -75,15 +79,16 @@ static ssize_t hwsampler_write(struct file *file, char const __user *buf, if (retval) return retval; - if (oprofile_hwsampler == val) - return -EINVAL; - - retval = oprofile_set_hwsampler(val); + if (oprofile_started) + /* + * save to do without locking as we set + * hwsampler_running in start() when start_mutex is + * held + */ + return -EBUSY; - if (retval) - return retval; + hwsampler_file = val; - oprofile_hwsampler = val; return count; } @@ -98,7 +103,7 @@ static int oprofile_create_hwsampling_files(struct super_block *sb, struct dentry *hw_dir; /* reinitialize default values */ - oprofile_hwsampler = 1; + hwsampler_file = 1; hw_dir = oprofilefs_mkdir(sb, root, "hwsampling"); if (!hw_dir) @@ -125,7 +130,6 @@ int oprofile_hwsampler_init(struct oprofile_operations* ops) /* * create hwsampler files only if hwsampler_setup() succeeds. */ - ops->create_files = oprofile_create_hwsampling_files; oprofile_min_interval = hwsampler_query_min_interval(); if (oprofile_min_interval < 0) { oprofile_min_interval = 0; @@ -136,11 +140,23 @@ int oprofile_hwsampler_init(struct oprofile_operations* ops) oprofile_max_interval = 0; return -ENODEV; } - oprofile_arch_set_hwsampler(ops); + + if (oprofile_timer_init(ops)) + return -ENODEV; + + printk(KERN_INFO "oprofile: using hardware sampling\n"); + + memcpy(&timer_ops, ops, sizeof(timer_ops)); + + ops->start = oprofile_hwsampler_start; + ops->stop = oprofile_hwsampler_stop; + ops->create_files = oprofile_create_hwsampling_files; + return 0; } void oprofile_hwsampler_exit(void) { + oprofile_timer_exit(); hwsampler_shutdown(); } diff --git a/arch/s390/oprofile/init.c b/arch/s390/oprofile/init.c index f6b3f724f59..059b44b9f17 100644 --- a/arch/s390/oprofile/init.c +++ b/arch/s390/oprofile/init.c @@ -11,7 +11,6 @@ #include #include #include -#include extern int oprofile_hwsampler_init(struct oprofile_operations* ops); extern void oprofile_hwsampler_exit(void); -- cgit v1.2.3-18-g5258 From 7bb2e269aefe4539313922ab4a89367cd52a51d1 Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Mon, 14 Feb 2011 19:08:33 +0100 Subject: oprofile, s390: Fix section mismatch of function hws_cpu_callback() Fixes the following section mismatch: Section mismatch in reference from the variable hws_cpu_notifier to the function .cpuinit.text:hws_cpu_callback() Acked-by: Heiko Carstens Signed-off-by: Robert Richter --- arch/s390/oprofile/hwsampler.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/s390/oprofile/hwsampler.c b/arch/s390/oprofile/hwsampler.c index ab3f770e35b..3d48f4db246 100644 --- a/arch/s390/oprofile/hwsampler.c +++ b/arch/s390/oprofile/hwsampler.c @@ -578,7 +578,7 @@ static struct notifier_block hws_oom_notifier = { .notifier_call = hws_oom_callback }; -static int __cpuinit hws_cpu_callback(struct notifier_block *nfb, +static int hws_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) { /* We do not have sampler space available for all possible CPUs. -- cgit v1.2.3-18-g5258 From 29a38193c15bd72ba96c57a805443ef46ea6a6ac Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Tue, 15 Feb 2011 14:31:37 +0100 Subject: ARM: 6674/1: LPAE: use long long format when printing physical addresses and ptes For the Kernel to support 2 level and 3 level page tables, physical addresses (and also page table entries) need to be 32 or 64-bits depending upon the configuration. This patch uses the %08llx conversion specifier for physical addresses and page table entries, ensuring that they are cast to (long long) so that common code can be used regardless of the datatype widths. Acked-by: Catalin Marinas Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/setup.c | 2 +- arch/arm/kernel/traps.c | 6 +++--- arch/arm/mm/fault.c | 10 ++++++---- arch/arm/mm/mmu.c | 26 +++++++++++++------------- 4 files changed, 23 insertions(+), 21 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 336f14e0e5c..77af580953e 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -448,7 +448,7 @@ static int __init arm_add_memory(unsigned long start, unsigned long size) if (meminfo.nr_banks >= NR_BANKS) { printk(KERN_CRIT "NR_BANKS too low, " - "ignoring memory at %#lx\n", start); + "ignoring memory at 0x%08llx\n", (long long)start); return -EINVAL; } diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 354cd4ce400..10f5b8926ee 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -710,17 +710,17 @@ EXPORT_SYMBOL(__readwrite_bug); void __pte_error(const char *file, int line, pte_t pte) { - printk("%s:%d: bad pte %08lx.\n", file, line, pte_val(pte)); + printk("%s:%d: bad pte %08llx.\n", file, line, (long long)pte_val(pte)); } void __pmd_error(const char *file, int line, pmd_t pmd) { - printk("%s:%d: bad pmd %08lx.\n", file, line, pmd_val(pmd)); + printk("%s:%d: bad pmd %08llx.\n", file, line, (long long)pmd_val(pmd)); } void __pgd_error(const char *file, int line, pgd_t pgd) { - printk("%s:%d: bad pgd %08lx.\n", file, line, pgd_val(pgd)); + printk("%s:%d: bad pgd %08llx.\n", file, line, (long long)pgd_val(pgd)); } asmlinkage void __div0(void) diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index f10f9bac220..ef0e24f578e 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -76,7 +76,8 @@ void show_pte(struct mm_struct *mm, unsigned long addr) printk(KERN_ALERT "pgd = %p\n", mm->pgd); pgd = pgd_offset(mm, addr); - printk(KERN_ALERT "[%08lx] *pgd=%08lx", addr, pgd_val(*pgd)); + printk(KERN_ALERT "[%08lx] *pgd=%08llx", + addr, (long long)pgd_val(*pgd)); do { pmd_t *pmd; @@ -92,7 +93,7 @@ void show_pte(struct mm_struct *mm, unsigned long addr) pmd = pmd_offset(pgd, addr); if (PTRS_PER_PMD != 1) - printk(", *pmd=%08lx", pmd_val(*pmd)); + printk(", *pmd=%08llx", (long long)pmd_val(*pmd)); if (pmd_none(*pmd)) break; @@ -107,8 +108,9 @@ void show_pte(struct mm_struct *mm, unsigned long addr) break; pte = pte_offset_map(pmd, addr); - printk(", *pte=%08lx", pte_val(*pte)); - printk(", *ppte=%08lx", pte_val(pte[PTE_HWTABLE_PTRS])); + printk(", *pte=%08llx", (long long)pte_val(*pte)); + printk(", *ppte=%08llx", + (long long)pte_val(pte[PTE_HWTABLE_PTRS])); pte_unmap(pte); } while(0); diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 7515d471864..f512ad97daf 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -597,7 +597,7 @@ static void __init create_36bit_mapping(struct map_desc *md, if (!(cpu_architecture() >= CPU_ARCH_ARMv6 || cpu_is_xsc3())) { printk(KERN_ERR "MM: CPU does not support supersection " "mapping for 0x%08llx at 0x%08lx\n", - __pfn_to_phys((u64)md->pfn), addr); + (long long)__pfn_to_phys((u64)md->pfn), addr); return; } @@ -610,14 +610,14 @@ static void __init create_36bit_mapping(struct map_desc *md, if (type->domain) { printk(KERN_ERR "MM: invalid domain in supersection " "mapping for 0x%08llx at 0x%08lx\n", - __pfn_to_phys((u64)md->pfn), addr); + (long long)__pfn_to_phys((u64)md->pfn), addr); return; } if ((addr | length | __pfn_to_phys(md->pfn)) & ~SUPERSECTION_MASK) { - printk(KERN_ERR "MM: cannot create mapping for " - "0x%08llx at 0x%08lx invalid alignment\n", - __pfn_to_phys((u64)md->pfn), addr); + printk(KERN_ERR "MM: cannot create mapping for 0x%08llx" + " at 0x%08lx invalid alignment\n", + (long long)__pfn_to_phys((u64)md->pfn), addr); return; } @@ -656,17 +656,17 @@ static void __init create_mapping(struct map_desc *md) pgd_t *pgd; if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) { - printk(KERN_WARNING "BUG: not creating mapping for " - "0x%08llx at 0x%08lx in user region\n", - __pfn_to_phys((u64)md->pfn), md->virtual); + printk(KERN_WARNING "BUG: not creating mapping for 0x%08llx" + " at 0x%08lx in user region\n", + (long long)__pfn_to_phys((u64)md->pfn), md->virtual); return; } if ((md->type == MT_DEVICE || md->type == MT_ROM) && md->virtual >= PAGE_OFFSET && md->virtual < VMALLOC_END) { - printk(KERN_WARNING "BUG: mapping for 0x%08llx at 0x%08lx " - "overlaps vmalloc space\n", - __pfn_to_phys((u64)md->pfn), md->virtual); + printk(KERN_WARNING "BUG: mapping for 0x%08llx" + " at 0x%08lx overlaps vmalloc space\n", + (long long)__pfn_to_phys((u64)md->pfn), md->virtual); } type = &mem_types[md->type]; @@ -684,9 +684,9 @@ static void __init create_mapping(struct map_desc *md) length = PAGE_ALIGN(md->length + (md->virtual & ~PAGE_MASK)); if (type->prot_l1 == 0 && ((addr | phys | length) & ~SECTION_MASK)) { - printk(KERN_WARNING "BUG: map for 0x%08lx at 0x%08lx can not " + printk(KERN_WARNING "BUG: map for 0x%08llx at 0x%08lx can not " "be mapped using pages, ignoring.\n", - __pfn_to_phys(md->pfn), addr); + (long long)__pfn_to_phys(md->pfn), addr); return; } -- cgit v1.2.3-18-g5258 From ad6b9c9d78b9beebef02ac7f566a08db7be3c320 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Tue, 15 Feb 2011 12:41:49 +0100 Subject: ARM: 6671/1: LPAE: use phys_addr_t instead of unsigned long in outercache functions The unsigned long datatype is not sufficient for mapping physical addresses >= 4GB. This patch ensures that the phys_addr_t datatype is used to represent physical addresses when passed to the outer cache functions. Note that the definitions in struct outer_cache_fns remain as unsigned long because there are currently no outer cache implementations supporting physical addresses wider than 32-bits. Acked-by: Catalin Marinas Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/include/asm/outercache.h | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/outercache.h b/arch/arm/include/asm/outercache.h index fc190092527..88ad8920976 100644 --- a/arch/arm/include/asm/outercache.h +++ b/arch/arm/include/asm/outercache.h @@ -21,6 +21,8 @@ #ifndef __ASM_OUTERCACHE_H #define __ASM_OUTERCACHE_H +#include + struct outer_cache_fns { void (*inv_range)(unsigned long, unsigned long); void (*clean_range)(unsigned long, unsigned long); @@ -37,17 +39,17 @@ struct outer_cache_fns { extern struct outer_cache_fns outer_cache; -static inline void outer_inv_range(unsigned long start, unsigned long end) +static inline void outer_inv_range(phys_addr_t start, phys_addr_t end) { if (outer_cache.inv_range) outer_cache.inv_range(start, end); } -static inline void outer_clean_range(unsigned long start, unsigned long end) +static inline void outer_clean_range(phys_addr_t start, phys_addr_t end) { if (outer_cache.clean_range) outer_cache.clean_range(start, end); } -static inline void outer_flush_range(unsigned long start, unsigned long end) +static inline void outer_flush_range(phys_addr_t start, phys_addr_t end) { if (outer_cache.flush_range) outer_cache.flush_range(start, end); @@ -73,11 +75,11 @@ static inline void outer_disable(void) #else -static inline void outer_inv_range(unsigned long start, unsigned long end) +static inline void outer_inv_range(phys_addr_t start, phys_addr_t end) { } -static inline void outer_clean_range(unsigned long start, unsigned long end) +static inline void outer_clean_range(phys_addr_t start, phys_addr_t end) { } -static inline void outer_flush_range(unsigned long start, unsigned long end) +static inline void outer_flush_range(phys_addr_t start, phys_addr_t end) { } static inline void outer_flush_all(void) { } static inline void outer_inv_all(void) { } -- cgit v1.2.3-18-g5258 From cae6292b653f5e3308bf2787a54b7dcd2cc7e2b3 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Tue, 15 Feb 2011 12:42:57 +0100 Subject: ARM: 6672/1: LPAE: use phys_addr_t instead of unsigned long in mapping functions The unsigned long datatype is not sufficient for mapping physical addresses >= 4GB. This patch ensures that the phys_addr_t datatype is used to represent physical addresses when converting from a PFN. Acked-by: Catalin Marinas Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/include/asm/pgtable.h | 2 +- arch/arm/mm/init.c | 6 +++--- arch/arm/mm/mmu.c | 7 ++++--- 3 files changed, 8 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index ebcb6432f45..ca567914d30 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -351,7 +351,7 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd) #define pte_unmap(pte) __pte_unmap(pte) #define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT) -#define pfn_pte(pfn,prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) +#define pfn_pte(pfn,prot) __pte(__pfn_to_phys(pfn) | pgprot_val(prot)) #define pte_page(pte) pfn_to_page(pte_pfn(pte)) #define mk_pte(page,prot) pfn_pte(page_to_pfn(page), prot) diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 5164069ced4..14a00a1ef52 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -344,7 +344,7 @@ void __init bootmem_init(void) */ arm_bootmem_free(min, max_low, max_high); - high_memory = __va((max_low << PAGE_SHIFT) - 1) + 1; + high_memory = __va(((phys_addr_t)max_low << PAGE_SHIFT) - 1) + 1; /* * This doesn't seem to be used by the Linux memory manager any @@ -392,8 +392,8 @@ free_memmap(unsigned long start_pfn, unsigned long end_pfn) * Convert to physical addresses, and * round start upwards and end downwards. */ - pg = PAGE_ALIGN(__pa(start_pg)); - pgend = __pa(end_pg) & PAGE_MASK; + pg = (unsigned long)PAGE_ALIGN(__pa(start_pg)); + pgend = (unsigned long)__pa(end_pg) & PAGE_MASK; /* * If there are free pages between these, diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index f512ad97daf..e09744e82d5 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -591,7 +591,7 @@ static void __init create_36bit_mapping(struct map_desc *md, pgd_t *pgd; addr = md->virtual; - phys = (unsigned long)__pfn_to_phys(md->pfn); + phys = __pfn_to_phys(md->pfn); length = PAGE_ALIGN(md->length); if (!(cpu_architecture() >= CPU_ARCH_ARMv6 || cpu_is_xsc3())) { @@ -651,7 +651,8 @@ static void __init create_36bit_mapping(struct map_desc *md, */ static void __init create_mapping(struct map_desc *md) { - unsigned long phys, addr, length, end; + unsigned long addr, length, end; + phys_addr_t phys; const struct mem_type *type; pgd_t *pgd; @@ -680,7 +681,7 @@ static void __init create_mapping(struct map_desc *md) } addr = md->virtual & PAGE_MASK; - phys = (unsigned long)__pfn_to_phys(md->pfn); + phys = __pfn_to_phys(md->pfn); length = PAGE_ALIGN(md->length + (md->virtual & ~PAGE_MASK)); if (type->prot_l1 == 0 && ((addr | phys | length) & ~SECTION_MASK)) { -- cgit v1.2.3-18-g5258 From 261cd298a8c363d7985e3482946edb4bfedacf98 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Tue, 15 Feb 2011 09:43:32 +0100 Subject: s390: remove task_show_regs task_show_regs used to be a debugging aid in the early bringup days of Linux on s390. /proc//status is a world readable file, it is not a good idea to show the registers of a process. The only correct fix is to remove task_show_regs. Reported-by: Al Viro Signed-off-by: Martin Schwidefsky Signed-off-by: Linus Torvalds --- arch/s390/include/asm/processor.h | 5 ----- arch/s390/kernel/traps.c | 37 ------------------------------------- 2 files changed, 42 deletions(-) (limited to 'arch') diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h index bf3de04170a..2c79b641627 100644 --- a/arch/s390/include/asm/processor.h +++ b/arch/s390/include/asm/processor.h @@ -148,11 +148,6 @@ extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); */ extern unsigned long thread_saved_pc(struct task_struct *t); -/* - * Print register of task into buffer. Used in fs/proc/array.c. - */ -extern void task_show_regs(struct seq_file *m, struct task_struct *task); - extern void show_code(struct pt_regs *regs); unsigned long get_wchan(struct task_struct *p); diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c index 5eb78dd584c..b5a4a739b47 100644 --- a/arch/s390/kernel/traps.c +++ b/arch/s390/kernel/traps.c @@ -237,43 +237,6 @@ void show_regs(struct pt_regs *regs) show_last_breaking_event(regs); } -/* This is called from fs/proc/array.c */ -void task_show_regs(struct seq_file *m, struct task_struct *task) -{ - struct pt_regs *regs; - - regs = task_pt_regs(task); - seq_printf(m, "task: %p, ksp: %p\n", - task, (void *)task->thread.ksp); - seq_printf(m, "User PSW : %p %p\n", - (void *) regs->psw.mask, (void *)regs->psw.addr); - - seq_printf(m, "User GPRS: " FOURLONG, - regs->gprs[0], regs->gprs[1], - regs->gprs[2], regs->gprs[3]); - seq_printf(m, " " FOURLONG, - regs->gprs[4], regs->gprs[5], - regs->gprs[6], regs->gprs[7]); - seq_printf(m, " " FOURLONG, - regs->gprs[8], regs->gprs[9], - regs->gprs[10], regs->gprs[11]); - seq_printf(m, " " FOURLONG, - regs->gprs[12], regs->gprs[13], - regs->gprs[14], regs->gprs[15]); - seq_printf(m, "User ACRS: %08x %08x %08x %08x\n", - task->thread.acrs[0], task->thread.acrs[1], - task->thread.acrs[2], task->thread.acrs[3]); - seq_printf(m, " %08x %08x %08x %08x\n", - task->thread.acrs[4], task->thread.acrs[5], - task->thread.acrs[6], task->thread.acrs[7]); - seq_printf(m, " %08x %08x %08x %08x\n", - task->thread.acrs[8], task->thread.acrs[9], - task->thread.acrs[10], task->thread.acrs[11]); - seq_printf(m, " %08x %08x %08x %08x\n", - task->thread.acrs[12], task->thread.acrs[13], - task->thread.acrs[14], task->thread.acrs[15]); -} - static DEFINE_SPINLOCK(die_lock); void die(const char * str, struct pt_regs * regs, long err) -- cgit v1.2.3-18-g5258 From 6fc31d54443bdc25a8166be15e3920a7e39d195d Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 12 Jan 2011 17:50:42 +0000 Subject: ARM: Defer lookup of machine_type to setup.c Since the debug macros no longer depend on the machine type information, the machine type lookup can be deferred to setup_arch() in setup.c which simplifies the code somewhat. We also move the __error_a functionality into setup.c for displaying a message when a bad machine ID is passed to the kernel via the LL debug code. We also log this into the kernel ring buffer which makes it possible to retrieve the message via a debugger. Original idea from Grant Likely. Acked-by: Grant Likely Tested-by: Tony Lindgren Signed-off-by: Russell King --- arch/arm/kernel/head-common.S | 90 ------------------------------------------- arch/arm/kernel/head-nommu.S | 3 -- arch/arm/kernel/head.S | 9 +---- arch/arm/kernel/setup.c | 39 ++++++++++++++++++- 4 files changed, 40 insertions(+), 101 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index 8f57515bbdb..c84b57d27d0 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -25,83 +25,6 @@ * machine ID for example). */ __HEAD -__error_a: -#ifdef CONFIG_DEBUG_LL - mov r4, r1 @ preserve machine ID - adr r0, str_a1 - bl printascii - mov r0, r4 - bl printhex8 - adr r0, str_a2 - bl printascii - adr r3, __lookup_machine_type_data - ldmia r3, {r4, r5, r6} @ get machine desc list - sub r4, r3, r4 @ get offset between virt&phys - add r5, r5, r4 @ convert virt addresses to - add r6, r6, r4 @ physical address space -1: ldr r0, [r5, #MACHINFO_TYPE] @ get machine type - bl printhex8 - mov r0, #'\t' - bl printch - ldr r0, [r5, #MACHINFO_NAME] @ get machine name - add r0, r0, r4 - bl printascii - mov r0, #'\n' - bl printch - add r5, r5, #SIZEOF_MACHINE_DESC @ next machine_desc - cmp r5, r6 - blo 1b - adr r0, str_a3 - bl printascii - b __error -ENDPROC(__error_a) - -str_a1: .asciz "\nError: unrecognized/unsupported machine ID (r1 = 0x" -str_a2: .asciz ").\n\nAvailable machine support:\n\nID (hex)\tNAME\n" -str_a3: .asciz "\nPlease check your kernel config and/or bootloader.\n" - .align -#else - b __error -#endif - -/* - * Lookup machine architecture in the linker-build list of architectures. - * Note that we can't use the absolute addresses for the __arch_info - * lists since we aren't running with the MMU on (and therefore, we are - * not in the correct address space). We have to calculate the offset. - * - * r1 = machine architecture number - * Returns: - * r3, r4, r6 corrupted - * r5 = mach_info pointer in physical address space - */ -__lookup_machine_type: - adr r3, __lookup_machine_type_data - ldmia r3, {r4, r5, r6} - sub r3, r3, r4 @ get offset between virt&phys - add r5, r5, r3 @ convert virt addresses to - add r6, r6, r3 @ physical address space -1: ldr r3, [r5, #MACHINFO_TYPE] @ get machine type - teq r3, r1 @ matches loader number? - beq 2f @ found - add r5, r5, #SIZEOF_MACHINE_DESC @ next machine_desc - cmp r5, r6 - blo 1b - mov r5, #0 @ unknown machine -2: mov pc, lr -ENDPROC(__lookup_machine_type) - -/* - * Look in arch/arm/kernel/arch.[ch] for information about the - * __arch_info structures. - */ - .align 2 - .type __lookup_machine_type_data, %object -__lookup_machine_type_data: - .long . - .long __arch_info_begin - .long __arch_info_end - .size __lookup_machine_type_data, . - __lookup_machine_type_data /* Determine validity of the r2 atags pointer. The heuristic requires * that the pointer be aligned, in the first 16k of physical RAM and @@ -109,8 +32,6 @@ __lookup_machine_type_data: * of this function may be more lenient with the physical address and * may also be able to move the ATAGS block if necessary. * - * r8 = machinfo - * * Returns: * r2 either valid atags pointer, or zero * r5, r6 corrupted @@ -184,17 +105,6 @@ __mmap_switched_data: .long init_thread_union + THREAD_START_SP @ sp .size __mmap_switched_data, . - __mmap_switched_data -/* - * This provides a C-API version of __lookup_machine_type - */ -ENTRY(lookup_machine_type) - stmfd sp!, {r4 - r6, lr} - mov r1, r0 - bl __lookup_machine_type - mov r0, r5 - ldmfd sp!, {r4 - r6, pc} -ENDPROC(lookup_machine_type) - /* * This provides a C-API version of __lookup_processor_type */ diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index 814ce1a7327..6b1e0ad9ec3 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -44,9 +44,6 @@ ENTRY(stext) bl __lookup_processor_type @ r5=procinfo r9=cpuid movs r10, r5 @ invalid processor (r5=0)? beq __error_p @ yes, error 'p' - bl __lookup_machine_type @ r5=machinfo - movs r8, r5 @ invalid machine (r5=0)? - beq __error_a @ yes, error 'a' adr lr, BSYM(__after_proc_init) @ return (PIC) address ARM( add pc, r10, #PROCINFO_INITFUNC ) diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index c0225da3fb2..8a154b940fe 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -87,14 +87,10 @@ ENTRY(stext) movs r10, r5 @ invalid processor (r5=0)? THUMB( it eq ) @ force fixup-able long branch encoding beq __error_p @ yes, error 'p' - bl __lookup_machine_type @ r5=machinfo - movs r8, r5 @ invalid machine (r5=0)? - THUMB( it eq ) @ force fixup-able long branch encoding - beq __error_a @ yes, error 'a' /* * r1 = machine no, r2 = atags, - * r8 = machinfo, r9 = cpuid, r10 = procinfo + * r9 = cpuid, r10 = procinfo */ bl __vet_atags #ifdef CONFIG_SMP_ON_UP @@ -105,7 +101,7 @@ ENTRY(stext) /* * The following calls CPU specific code in a position independent * manner. See arch/arm/mm/proc-*.S for details. r10 = base of - * xxx_proc_info structure selected by __lookup_machine_type + * xxx_proc_info structure selected by __lookup_processor_type * above. On return, the CPU will be ready for the MMU to be * turned on, and r0 will hold the CPU control register value. */ @@ -124,7 +120,6 @@ ENDPROC(stext) * amount which are required to get the kernel running, which * generally means mapping in the kernel code. * - * r8 = machinfo * r9 = cpuid * r10 = procinfo * diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 420b8d6485d..78678b07901 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -308,7 +308,44 @@ static void __init cacheid_init(void) * already provide the required functionality. */ extern struct proc_info_list *lookup_processor_type(unsigned int); -extern struct machine_desc *lookup_machine_type(unsigned int); + +static void __init early_print(const char *str, ...) +{ + extern void printascii(const char *); + char buf[256]; + va_list ap; + + va_start(ap, str); + vsnprintf(buf, sizeof(buf), str, ap); + va_end(ap); + +#ifdef CONFIG_DEBUG_LL + printascii(buf); +#endif + printk("%s", buf); +} + +static struct machine_desc * __init lookup_machine_type(unsigned int type) +{ + extern struct machine_desc __arch_info_begin[], __arch_info_end[]; + struct machine_desc *p; + + for (p = __arch_info_begin; p < __arch_info_end; p++) + if (type == p->nr) + return p; + + early_print("\n" + "Error: unrecognized/unsupported machine ID (r1 = 0x%08x).\n\n" + "Available machine support:\n\nID (hex)\tNAME\n", type); + + for (p = __arch_info_begin; p < __arch_info_end; p++) + early_print("%08x\t%s\n", p->nr, p->name); + + early_print("\nPlease check your kernel config and/or bootloader.\n"); + + while (true) + /* can't use cpu_relax() here as it may require MMU setup */; +} static void __init feat_v6_fixup(void) { -- cgit v1.2.3-18-g5258 From b62818e5ff78cab4daf04fc0c12f86475dbc4b69 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 15 Feb 2011 15:04:07 -0800 Subject: sparc64: Fix NMI startup bug which also breaks perf. Doing NMI startup as an early initcall doesn't work because we need to have SMP started up by then. So we'd only NMI startup one cpu, which causes perf PMU grab to BUG because the nmi_active count isn't what it's supposed to be. This also points out that we don't have proper CPU up/down notifiers for the NMI code which will need to be fixed at some point. Signed-off-by: David S. Miller --- arch/sparc/include/asm/pcr.h | 2 ++ arch/sparc/kernel/pcr.c | 2 -- arch/sparc/kernel/smp_64.c | 2 ++ 3 files changed, 4 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc/include/asm/pcr.h b/arch/sparc/include/asm/pcr.h index a2f5c61f924..843e4faf6a5 100644 --- a/arch/sparc/include/asm/pcr.h +++ b/arch/sparc/include/asm/pcr.h @@ -43,4 +43,6 @@ static inline u64 picl_value(unsigned int nmi_hz) extern u64 pcr_enable; +extern int pcr_arch_init(void); + #endif /* __PCR_H */ diff --git a/arch/sparc/kernel/pcr.c b/arch/sparc/kernel/pcr.c index ae96cf52a95..7c2ced612b8 100644 --- a/arch/sparc/kernel/pcr.c +++ b/arch/sparc/kernel/pcr.c @@ -167,5 +167,3 @@ out_unregister: unregister_perf_hsvc(); return err; } - -early_initcall(pcr_arch_init); diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c index b6a2b8f4704..555a76d1f4a 100644 --- a/arch/sparc/kernel/smp_64.c +++ b/arch/sparc/kernel/smp_64.c @@ -49,6 +49,7 @@ #include #include #include +#include #include "cpumap.h" @@ -1358,6 +1359,7 @@ void __cpu_die(unsigned int cpu) void __init smp_cpus_done(unsigned int max_cpus) { + pcr_arch_init(); } void smp_send_reschedule(int cpu) -- cgit v1.2.3-18-g5258 From f9d693d237a173915fcfbd86b28753f93b7d142f Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Thu, 3 Feb 2011 21:31:20 +1000 Subject: m68k: remove arch specific non-optimized memcmp() The m68k arch implements its own memcmp() function. It is not optimized in any way (it is the most strait forward coding of memcmp you can get). Remove it and use the kernels standard memcmp() implementation. This also goes part of the way to fixing a regression caused by commit ea61bc461d09e8d331a307916530aaae808c72a2 ("m68k/m68knommu: merge MMU and non-MMU string.h"), which breaks non-coldfire non-mmu builds (which is the 68x328 and 68360 families). They currently have no memcmp() function defined, since there is none in the m68knommu/lib functions. Signed-off-by: Greg Ungerer Acked-by: Geert Uytterhoeven --- arch/m68k/include/asm/string.h | 4 +--- arch/m68k/lib/string.c | 11 ----------- 2 files changed, 1 insertion(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/m68k/include/asm/string.h b/arch/m68k/include/asm/string.h index 65b13128283..ffc3c3f6124 100644 --- a/arch/m68k/include/asm/string.h +++ b/arch/m68k/include/asm/string.h @@ -102,11 +102,9 @@ static inline int strcmp(const char *cs, const char *ct) #define __HAVE_ARCH_MEMMOVE extern void *memmove(void *, const void *, __kernel_size_t); +#endif /* CONFIG_COLDFIRE */ -#define __HAVE_ARCH_MEMCMP -extern int memcmp(const void *, const void *, __kernel_size_t); #define memcmp(d, s, n) __builtin_memcmp(d, s, n) -#endif /* CONFIG_COLDFIRE */ #define __HAVE_ARCH_MEMSET extern void *memset(void *, int, __kernel_size_t); diff --git a/arch/m68k/lib/string.c b/arch/m68k/lib/string.c index 4253f870e54..d399c5f2563 100644 --- a/arch/m68k/lib/string.c +++ b/arch/m68k/lib/string.c @@ -243,14 +243,3 @@ void *memmove(void *dest, const void *src, size_t n) return xdest; } EXPORT_SYMBOL(memmove); - -int memcmp(const void *cs, const void *ct, size_t count) -{ - const unsigned char *su1, *su2; - - for (su1 = cs, su2 = ct; count > 0; ++su1, ++su2, count--) - if (*su1 != *su2) - return *su1 < *su2 ? -1 : +1; - return 0; -} -EXPORT_SYMBOL(memcmp); -- cgit v1.2.3-18-g5258 From 982cd252ca0b63c11fe398c09c6f2b41217c78c0 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Thu, 3 Feb 2011 21:58:39 +1000 Subject: m68knommu: add optimize memmove() function Add an m68k/coldfire optimized memmove() function for the m68knommu arch. This is the same function as used by m68k. Simple speed tests show this is faster once buffers are larger than 4 bytes, and significantly faster on much larger buffers (4 times faster above about 100 bytes). This also goes part of the way to fixing a regression caused by commit ea61bc461d09e8d331a307916530aaae808c72a2 ("m68k/m68knommu: merge MMU and non-MMU string.h"), which breaks non-coldfire non-mmu builds (which is the 68x328 and 68360 families). They currently have no memmove() fucntion defined, since there was none in the m68knommu/lib functions. Signed-off-by: Greg Ungerer --- arch/m68k/include/asm/string.h | 2 +- arch/m68knommu/lib/Makefile | 2 +- arch/m68knommu/lib/memmove.c | 105 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 107 insertions(+), 2 deletions(-) create mode 100644 arch/m68knommu/lib/memmove.c (limited to 'arch') diff --git a/arch/m68k/include/asm/string.h b/arch/m68k/include/asm/string.h index ffc3c3f6124..32198454da7 100644 --- a/arch/m68k/include/asm/string.h +++ b/arch/m68k/include/asm/string.h @@ -99,10 +99,10 @@ static inline int strcmp(const char *cs, const char *ct) : "+a" (cs), "+a" (ct), "=d" (res)); return res; } +#endif /* CONFIG_COLDFIRE */ #define __HAVE_ARCH_MEMMOVE extern void *memmove(void *, const void *, __kernel_size_t); -#endif /* CONFIG_COLDFIRE */ #define memcmp(d, s, n) __builtin_memcmp(d, s, n) diff --git a/arch/m68knommu/lib/Makefile b/arch/m68knommu/lib/Makefile index d94d709665a..32d852e586d 100644 --- a/arch/m68knommu/lib/Makefile +++ b/arch/m68knommu/lib/Makefile @@ -4,4 +4,4 @@ lib-y := ashldi3.o ashrdi3.o lshrdi3.o \ muldi3.o mulsi3.o divsi3.o udivsi3.o modsi3.o umodsi3.o \ - checksum.o memcpy.o memset.o delay.o + checksum.o memcpy.o memmove.o memset.o delay.o diff --git a/arch/m68knommu/lib/memmove.c b/arch/m68knommu/lib/memmove.c new file mode 100644 index 00000000000..b3dcfe9dab7 --- /dev/null +++ b/arch/m68knommu/lib/memmove.c @@ -0,0 +1,105 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +#define __IN_STRING_C + +#include +#include + +void *memmove(void *dest, const void *src, size_t n) +{ + void *xdest = dest; + size_t temp; + + if (!n) + return xdest; + + if (dest < src) { + if ((long)dest & 1) { + char *cdest = dest; + const char *csrc = src; + *cdest++ = *csrc++; + dest = cdest; + src = csrc; + n--; + } + if (n > 2 && (long)dest & 2) { + short *sdest = dest; + const short *ssrc = src; + *sdest++ = *ssrc++; + dest = sdest; + src = ssrc; + n -= 2; + } + temp = n >> 2; + if (temp) { + long *ldest = dest; + const long *lsrc = src; + temp--; + do + *ldest++ = *lsrc++; + while (temp--); + dest = ldest; + src = lsrc; + } + if (n & 2) { + short *sdest = dest; + const short *ssrc = src; + *sdest++ = *ssrc++; + dest = sdest; + src = ssrc; + } + if (n & 1) { + char *cdest = dest; + const char *csrc = src; + *cdest = *csrc; + } + } else { + dest = (char *)dest + n; + src = (const char *)src + n; + if ((long)dest & 1) { + char *cdest = dest; + const char *csrc = src; + *--cdest = *--csrc; + dest = cdest; + src = csrc; + n--; + } + if (n > 2 && (long)dest & 2) { + short *sdest = dest; + const short *ssrc = src; + *--sdest = *--ssrc; + dest = sdest; + src = ssrc; + n -= 2; + } + temp = n >> 2; + if (temp) { + long *ldest = dest; + const long *lsrc = src; + temp--; + do + *--ldest = *--lsrc; + while (temp--); + dest = ldest; + src = lsrc; + } + if (n & 2) { + short *sdest = dest; + const short *ssrc = src; + *--sdest = *--ssrc; + dest = sdest; + src = ssrc; + } + if (n & 1) { + char *cdest = dest; + const char *csrc = src; + *--cdest = *--csrc; + } + } + return xdest; +} +EXPORT_SYMBOL(memmove); -- cgit v1.2.3-18-g5258 From b14769d94f697b118d960d7f73eb60ff7fa59af0 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Tue, 8 Feb 2011 14:40:44 +1000 Subject: m68knommu: fix mis-named variable int set_irq_chip loop MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Compiling for 68360 targets gives: CC arch/m68knommu/platform/68360/ints.o arch/m68knommu/platform/68360/ints.c: In function ‘init_IRQ’: arch/m68knommu/platform/68360/ints.c:135:16: error: ‘irq’ undeclared (first use in this function) arch/m68knommu/platform/68360/ints.c:135:16: note: each undeclared identifier is reported only once for each function it appears in Fix variable name used. Signed-off-by: Greg Ungerer --- arch/m68knommu/platform/68360/ints.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/m68knommu/platform/68360/ints.c b/arch/m68knommu/platform/68360/ints.c index ad96ab1051f..a29041c1a8a 100644 --- a/arch/m68knommu/platform/68360/ints.c +++ b/arch/m68knommu/platform/68360/ints.c @@ -132,8 +132,8 @@ void init_IRQ(void) pquicc->intr_cimr = 0x00000000; for (i = 0; (i < NR_IRQS); i++) { - set_irq_chip(irq, &intc_irq_chip); - set_irq_handler(irq, handle_level_irq); + set_irq_chip(i, &intc_irq_chip); + set_irq_handler(i, handle_level_irq); } } -- cgit v1.2.3-18-g5258 From 81174262e2e653e15c7ef23efa5f88fe31e91e2a Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Tue, 8 Feb 2011 14:45:59 +1000 Subject: m68knommu: add missing linker __modver section Add missing linker section __modver to fix: LD vmlinux /usr/local/bin/../m68k-uclinux/bin/ld.real: error: no memory region specified for loadable section `__modver' Signed-off-by: Greg Ungerer --- arch/m68knommu/kernel/vmlinux.lds.S | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S index ef332136f96..47e15ebfd89 100644 --- a/arch/m68knommu/kernel/vmlinux.lds.S +++ b/arch/m68knommu/kernel/vmlinux.lds.S @@ -141,6 +141,12 @@ SECTIONS { *(__param) __stop___param = .; + /* Built-in module versions */ + . = ALIGN(4) ; + __start___modver = .; + *(__modver) + __stop___modver = .; + . = ALIGN(4) ; _etext = . ; } > TEXT -- cgit v1.2.3-18-g5258 From 4531dab4294435d6f57ecd942831a79bab303287 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Tue, 8 Feb 2011 21:40:11 +1000 Subject: m68knommu: remove use of IRQ_FLG_LOCK from 68360 platform support The m68knommu arch does not define or use IRQ_FLG_LOCK in its irq subsystem. Remove obsolete use of it. Signed-off-by: Greg Ungerer --- arch/m68knommu/platform/68360/commproc.c | 2 +- arch/m68knommu/platform/68360/config.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/m68knommu/platform/68360/commproc.c b/arch/m68knommu/platform/68360/commproc.c index f27e688c404..8e4e10cc008 100644 --- a/arch/m68knommu/platform/68360/commproc.c +++ b/arch/m68knommu/platform/68360/commproc.c @@ -210,7 +210,7 @@ void cpm_install_handler(int vec, void (*handler)(), void *dev_id) { - request_irq(vec, handler, IRQ_FLG_LOCK, "timer", dev_id); + request_irq(vec, handler, 0, "timer", dev_id); /* if (cpm_vecs[vec].handler != 0) */ /* printk(KERN_INFO "CPM interrupt %x replacing %x\n", */ diff --git a/arch/m68knommu/platform/68360/config.c b/arch/m68knommu/platform/68360/config.c index ac629fa3009..9dd5bca3874 100644 --- a/arch/m68knommu/platform/68360/config.c +++ b/arch/m68knommu/platform/68360/config.c @@ -75,7 +75,7 @@ void hw_timer_init(void) /* Set compare register 32Khz / 32 / 10 = 100 */ TCMP = 10; - request_irq(IRQ_MACHSPEC | 1, timer_routine, IRQ_FLG_LOCK, "timer", NULL); + request_irq(IRQ_MACHSPEC | 1, timer_routine, 0, "timer", NULL); #endif /* General purpose quicc timers: MC68360UM p7-20 */ -- cgit v1.2.3-18-g5258 From 86d306c96046be597147d9f8ff163a052b3845d8 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Wed, 9 Feb 2011 13:43:58 +1000 Subject: m68knommu: set flow handler for secondary interrupt controller of 5249 The secondary interrupt controller of the ColdFire 5249 code is not setting the edge triggered flow handler. Set it. Signed-off-by: Greg Ungerer --- arch/m68knommu/platform/5249/intc2.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/m68knommu/platform/5249/intc2.c b/arch/m68knommu/platform/5249/intc2.c index d09d9da0453..c5151f84659 100644 --- a/arch/m68knommu/platform/5249/intc2.c +++ b/arch/m68knommu/platform/5249/intc2.c @@ -50,8 +50,10 @@ static int __init mcf_intc2_init(void) int irq; /* GPIO interrupt sources */ - for (irq = MCFINTC2_GPIOIRQ0; (irq <= MCFINTC2_GPIOIRQ7); irq++) + for (irq = MCFINTC2_GPIOIRQ0; (irq <= MCFINTC2_GPIOIRQ7); irq++) { irq_desc[irq].chip = &intc2_irq_gpio_chip; + set_irq_handler(irq, handle_edge_irq); + } return 0; } -- cgit v1.2.3-18-g5258 From fc9044e2db8c13746cd886d6276028b27ed5c78e Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Wed, 16 Feb 2011 13:04:09 +1100 Subject: crypto: aesni-intel - Fix remaining leak in rfc4106_set_hash_key Fix up previous patch that failed to properly fix mem leak in rfc4106_set_hash_subkey(). This add-on patch; fixes the leak. moves kfree() out of the error path, returns -ENOMEM rather than -EINVAL when ablkcipher_request_alloc() fails. Signed-off-by: Jesper Juhl Signed-off-by: Herbert Xu --- arch/x86/crypto/aesni-intel_glue.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c index e0135526345..e0e6340c8da 100644 --- a/arch/x86/crypto/aesni-intel_glue.c +++ b/arch/x86/crypto/aesni-intel_glue.c @@ -874,19 +874,17 @@ rfc4106_set_hash_subkey(u8 *hash_subkey, const u8 *key, unsigned int key_len) ret = crypto_ablkcipher_setkey(ctr_tfm, key, key_len); if (ret) - goto out; + goto out_free_ablkcipher; + ret = -ENOMEM; req = ablkcipher_request_alloc(ctr_tfm, GFP_KERNEL); - if (!req) { - ret = -EINVAL; + if (!req) goto out_free_ablkcipher; - } req_data = kmalloc(sizeof(*req_data), GFP_KERNEL); - if (!req_data) { - ret = -ENOMEM; + if (!req_data) goto out_free_request; - } + memset(req_data->iv, 0, sizeof(req_data->iv)); /* Clear the data in the hash sub key container to zero.*/ @@ -911,12 +909,11 @@ rfc4106_set_hash_subkey(u8 *hash_subkey, const u8 *key, unsigned int key_len) if (!ret) ret = req_data->result.err; } + kfree(req_data); out_free_request: ablkcipher_request_free(req); - kfree(req_data); out_free_ablkcipher: crypto_free_ablkcipher(ctr_tfm); -out: return ret; } -- cgit v1.2.3-18-g5258 From c23cf8baf6965fc9bcffb62c92b384b0f0c78eb7 Mon Sep 17 00:00:00 2001 From: "Justin P. Mattock" Date: Tue, 15 Feb 2011 22:54:44 -0800 Subject: cris: fix comment typo occationally to occasionally Signed-off-by: Justin P. Mattock Acked-by: Jesper Nilsson Signed-off-by: Jiri Kosina --- arch/cris/arch-v10/mm/init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/cris/arch-v10/mm/init.c b/arch/cris/arch-v10/mm/init.c index baa746ce4e7..e7f8066105a 100644 --- a/arch/cris/arch-v10/mm/init.c +++ b/arch/cris/arch-v10/mm/init.c @@ -241,7 +241,7 @@ flush_etrax_cacherange(void *startadr, int length) } /* Due to a bug in Etrax100(LX) all versions, receiving DMA buffers - * will occationally corrupt certain CPU writes if the DMA buffers + * will occasionally corrupt certain CPU writes if the DMA buffers * happen to be hot in the cache. * * As a workaround, we have to flush the relevant parts of the cache -- cgit v1.2.3-18-g5258 From 7d36b7bc9022f35f95cd85cdf441846298e8f9fb Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 16 Feb 2011 12:13:06 +0100 Subject: x86-64, NUMA: Make dummy node initialization path similar to non-dummy ones Dummy node initialization in initmem_init() didn't initialize apicid to node mapping and set cpu to node mapping directly by caling numa_set_node(), which is different from non-dummy init paths. Update it such that they behave similarly. Initialize apicid to node mapping and call numa_init_array(). The actual cpu to node mapping is handled by init_cpu_to_node() later. Signed-off-by: Tejun Heo Acked-by: Yinghai Lu Cc: Brian Gerst Cc: Cyrill Gorcunov Cc: Shaohui Zheng Cc: David Rientjes Cc: Ingo Molnar Cc: H. Peter Anvin --- arch/x86/mm/numa_64.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index 43ad3273561..b7d78d7a247 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -624,11 +624,12 @@ void __init initmem_init(unsigned long start_pfn, unsigned long last_pfn, memnodemap[0] = 0; node_set_online(0); node_set(0, node_possible_map); - for (i = 0; i < nr_cpu_ids; i++) - numa_set_node(i, 0); + for (i = 0; i < MAX_LOCAL_APIC; i++) + set_apicid_to_node(i, NUMA_NO_NODE); memblock_x86_register_active_regions(0, start_pfn, last_pfn); init_memory_mapping_high(); setup_node_bootmem(0, start_pfn << PAGE_SHIFT, last_pfn << PAGE_SHIFT); + numa_init_array(); } unsigned long __init numa_free_all_bootmem(void) -- cgit v1.2.3-18-g5258 From 13081df5dd6eae1951a3c398fa17d3ed2037a78f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 16 Feb 2011 12:13:06 +0100 Subject: x86-64, NUMA: Simplify hotplug node handling in acpi_numa_memory_affinity_init() Hotplug node handling in acpi_numa_memory_affinity_init() was unnecessarily complicated with storing the original nodes[] entry and restoring it afterwards. Simplify it by not modifying the nodes[] entry for hotplug nodes from the beginning. Signed-off-by: Tejun Heo Cc: Yinghai Lu Cc: Brian Gerst Cc: Cyrill Gorcunov Cc: Shaohui Zheng Cc: David Rientjes Cc: Ingo Molnar Cc: H. Peter Anvin --- arch/x86/mm/srat_64.c | 31 +++++++++++++------------------ 1 file changed, 13 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index 23498f8b09a..988b0b70ff3 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -251,7 +251,7 @@ update_nodes_add(int node, unsigned long start, unsigned long end) void __init acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) { - struct bootnode *nd, oldnode; + struct bootnode *nd; unsigned long start, end; int node, pxm; int i; @@ -289,28 +289,23 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) bad_srat(); return; } - nd = &nodes[node]; - oldnode = *nd; - if (!node_test_and_set(node, nodes_parsed)) { - nd->start = start; - nd->end = end; - } else { - if (start < nd->start) - nd->start = start; - if (nd->end < end) - nd->end = end; - } printk(KERN_INFO "SRAT: Node %u PXM %u %lx-%lx\n", node, pxm, start, end); - if (ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) { + if (!(ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE)) { + nd = &nodes[node]; + if (!node_test_and_set(node, nodes_parsed)) { + nd->start = start; + nd->end = end; + } else { + if (start < nd->start) + nd->start = start; + if (nd->end < end) + nd->end = end; + } + } else update_nodes_add(node, start, end); - /* restore nodes[node] */ - *nd = oldnode; - if ((nd->start | nd->end) == 0) - node_clear(node, nodes_parsed); - } node_memblk_range[num_node_memblks].start = start; node_memblk_range[num_node_memblks].end = end; -- cgit v1.2.3-18-g5258 From 86ef4dbf1f736bb1a4d567e043e3dd81b8b7860c Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 16 Feb 2011 12:13:06 +0100 Subject: x86, NUMA: Drop @start/last_pfn from initmem_init() initmem_init() extensively accesses and modifies global data structures and the parameters aren't even followed depending on which path is being used. Drop @start/last_pfn and let it deal with @max_pfn directly. This is in preparation for further NUMA init cleanups. - v2: x86-32 initmem_init() weren't updated breaking 32bit builds. Fixed. Found by Yinghai. Signed-off-by: Tejun Heo Cc: Yinghai Lu Cc: Brian Gerst Cc: Cyrill Gorcunov Cc: Shaohui Zheng Cc: David Rientjes Cc: Ingo Molnar Cc: H. Peter Anvin --- arch/x86/include/asm/page_types.h | 3 +-- arch/x86/kernel/setup.c | 2 +- arch/x86/mm/init_32.c | 3 +-- arch/x86/mm/init_64.c | 5 ++--- arch/x86/mm/numa_32.c | 3 +-- arch/x86/mm/numa_64.c | 21 ++++++++------------- 6 files changed, 14 insertions(+), 23 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/page_types.h b/arch/x86/include/asm/page_types.h index 731d211a1b2..eb9ed00355a 100644 --- a/arch/x86/include/asm/page_types.h +++ b/arch/x86/include/asm/page_types.h @@ -56,8 +56,7 @@ extern unsigned long init_memory_mapping(unsigned long start, void init_memory_mapping_high(void); -extern void initmem_init(unsigned long start_pfn, unsigned long end_pfn, - int acpi, int k8); +extern void initmem_init(int acpi, int k8); extern void free_initmem(void); #endif /* !__ASSEMBLY__ */ diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index ac909ba297b..756d640723f 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -1003,7 +1003,7 @@ void __init setup_arch(char **cmdline_p) amd = !amd_numa_init(0, max_pfn); #endif - initmem_init(0, max_pfn, acpi, amd); + initmem_init(acpi, amd); memblock_find_dma_reserve(); dma32_reserve_bootmem(); diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c index c821074b7f0..16adb666560 100644 --- a/arch/x86/mm/init_32.c +++ b/arch/x86/mm/init_32.c @@ -644,8 +644,7 @@ void __init find_low_pfn_range(void) } #ifndef CONFIG_NEED_MULTIPLE_NODES -void __init initmem_init(unsigned long start_pfn, unsigned long end_pfn, - int acpi, int k8) +void __init initmem_init(int acpi, int k8) { #ifdef CONFIG_HIGHMEM highstart_pfn = highend_pfn = max_pfn; diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 194f2732ab7..04cc027e543 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -603,10 +603,9 @@ kernel_physical_mapping_init(unsigned long start, } #ifndef CONFIG_NUMA -void __init initmem_init(unsigned long start_pfn, unsigned long end_pfn, - int acpi, int k8) +void __init initmem_init(int acpi, int k8) { - memblock_x86_register_active_regions(0, start_pfn, end_pfn); + memblock_x86_register_active_regions(0, 0, max_pfn); init_memory_mapping_high(); } #endif diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c index 505bb04654b..3249b374732 100644 --- a/arch/x86/mm/numa_32.c +++ b/arch/x86/mm/numa_32.c @@ -352,8 +352,7 @@ static void init_remap_allocator(int nid) (ulong) node_remap_end_vaddr[nid]); } -void __init initmem_init(unsigned long start_pfn, unsigned long end_pfn, - int acpi, int k8) +void __init initmem_init(int acpi, int k8) { int nid; long kva_target_pfn; diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index b7d78d7a247..d7e4aafd075 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -579,8 +579,7 @@ static int __init numa_emulation(unsigned long start_pfn, } #endif /* CONFIG_NUMA_EMU */ -void __init initmem_init(unsigned long start_pfn, unsigned long last_pfn, - int acpi, int amd) +void __init initmem_init(int acpi, int amd) { int i; @@ -588,19 +587,16 @@ void __init initmem_init(unsigned long start_pfn, unsigned long last_pfn, nodes_clear(node_online_map); #ifdef CONFIG_NUMA_EMU - setup_physnodes(start_pfn << PAGE_SHIFT, last_pfn << PAGE_SHIFT, - acpi, amd); - if (cmdline && !numa_emulation(start_pfn, last_pfn, acpi, amd)) + setup_physnodes(0, max_pfn << PAGE_SHIFT, acpi, amd); + if (cmdline && !numa_emulation(0, max_pfn, acpi, amd)) return; - setup_physnodes(start_pfn << PAGE_SHIFT, last_pfn << PAGE_SHIFT, - acpi, amd); + setup_physnodes(0, max_pfn << PAGE_SHIFT, acpi, amd); nodes_clear(node_possible_map); nodes_clear(node_online_map); #endif #ifdef CONFIG_ACPI_NUMA - if (!numa_off && acpi && !acpi_scan_nodes(start_pfn << PAGE_SHIFT, - last_pfn << PAGE_SHIFT)) + if (!numa_off && acpi && !acpi_scan_nodes(0, max_pfn << PAGE_SHIFT)) return; nodes_clear(node_possible_map); nodes_clear(node_online_map); @@ -616,8 +612,7 @@ void __init initmem_init(unsigned long start_pfn, unsigned long last_pfn, numa_off ? "NUMA turned off" : "No NUMA configuration found"); printk(KERN_INFO "Faking a node at %016lx-%016lx\n", - start_pfn << PAGE_SHIFT, - last_pfn << PAGE_SHIFT); + 0LU, max_pfn << PAGE_SHIFT); /* setup dummy node covering all memory */ memnode_shift = 63; memnodemap = memnode.embedded_map; @@ -626,9 +621,9 @@ void __init initmem_init(unsigned long start_pfn, unsigned long last_pfn, node_set(0, node_possible_map); for (i = 0; i < MAX_LOCAL_APIC; i++) set_apicid_to_node(i, NUMA_NO_NODE); - memblock_x86_register_active_regions(0, start_pfn, last_pfn); + memblock_x86_register_active_regions(0, 0, max_pfn); init_memory_mapping_high(); - setup_node_bootmem(0, start_pfn << PAGE_SHIFT, last_pfn << PAGE_SHIFT); + setup_node_bootmem(0, 0, max_pfn << PAGE_SHIFT); numa_init_array(); } -- cgit v1.2.3-18-g5258 From 940fed2e79a15cf0d006c860d7811adbe5c19882 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 16 Feb 2011 12:13:06 +0100 Subject: x86-64, NUMA: Unify {acpi|amd}_{numa_init|scan_nodes}() arguments and return values The functions used during NUMA initialization - *_numa_init() and *_scan_nodes() - have different arguments and return values. Unify them such that they all take no argument and return 0 on success and -errno on failure. This is in preparation for further NUMA init cleanups. Signed-off-by: Tejun Heo Cc: Yinghai Lu Cc: Brian Gerst Cc: Cyrill Gorcunov Cc: Shaohui Zheng Cc: David Rientjes Cc: Ingo Molnar Cc: H. Peter Anvin --- arch/x86/include/asm/acpi.h | 2 +- arch/x86/include/asm/amd_nb.h | 2 +- arch/x86/kernel/setup.c | 4 ++-- arch/x86/mm/amdtopology_64.c | 18 +++++++++--------- arch/x86/mm/numa_64.c | 2 +- arch/x86/mm/srat_64.c | 4 ++-- 6 files changed, 16 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h index 211ca3f7fd1..4e5dff9e0b3 100644 --- a/arch/x86/include/asm/acpi.h +++ b/arch/x86/include/asm/acpi.h @@ -187,7 +187,7 @@ struct bootnode; extern int acpi_numa; extern void acpi_get_nodes(struct bootnode *physnodes, unsigned long start, unsigned long end); -extern int acpi_scan_nodes(unsigned long start, unsigned long end); +extern int acpi_scan_nodes(void); #define NR_NODE_MEMBLKS (MAX_NUMNODES*2) #ifdef CONFIG_NUMA_EMU diff --git a/arch/x86/include/asm/amd_nb.h b/arch/x86/include/asm/amd_nb.h index 2b33c4df979..dc3c6e34da1 100644 --- a/arch/x86/include/asm/amd_nb.h +++ b/arch/x86/include/asm/amd_nb.h @@ -16,7 +16,7 @@ struct bootnode; extern int early_is_amd_nb(u32 value); extern int amd_cache_northbridges(void); extern void amd_flush_garts(void); -extern int amd_numa_init(unsigned long start_pfn, unsigned long end_pfn); +extern int amd_numa_init(void); extern int amd_scan_nodes(void); extern int amd_get_subcaches(int); extern int amd_set_subcaches(int, int); diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 756d640723f..96810a3c600 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -995,12 +995,12 @@ void __init setup_arch(char **cmdline_p) /* * Parse SRAT to discover nodes. */ - acpi = acpi_numa_init(); + acpi = !acpi_numa_init(); #endif #ifdef CONFIG_AMD_NUMA if (!acpi) - amd = !amd_numa_init(0, max_pfn); + amd = !amd_numa_init(); #endif initmem_init(acpi, amd); diff --git a/arch/x86/mm/amdtopology_64.c b/arch/x86/mm/amdtopology_64.c index 2523c3554de..655ccffc6ee 100644 --- a/arch/x86/mm/amdtopology_64.c +++ b/arch/x86/mm/amdtopology_64.c @@ -51,7 +51,7 @@ static __init int find_northbridge(void) return num; } - return -1; + return -ENOENT; } static __init void early_get_boot_cpu_id(void) @@ -69,17 +69,17 @@ static __init void early_get_boot_cpu_id(void) #endif } -int __init amd_numa_init(unsigned long start_pfn, unsigned long end_pfn) +int __init amd_numa_init(void) { - unsigned long start = PFN_PHYS(start_pfn); - unsigned long end = PFN_PHYS(end_pfn); + unsigned long start = PFN_PHYS(0); + unsigned long end = PFN_PHYS(max_pfn); unsigned numnodes; unsigned long prevbase; int i, nb, found = 0; u32 nodeid, reg; if (!early_pci_allowed()) - return -1; + return -EINVAL; nb = find_northbridge(); if (nb < 0) @@ -90,7 +90,7 @@ int __init amd_numa_init(unsigned long start_pfn, unsigned long end_pfn) reg = read_pci_config(0, nb, 0, 0x60); numnodes = ((reg >> 4) & 0xF) + 1; if (numnodes <= 1) - return -1; + return -ENOENT; pr_info("Number of physical nodes %d\n", numnodes); @@ -121,7 +121,7 @@ int __init amd_numa_init(unsigned long start_pfn, unsigned long end_pfn) if ((base >> 8) & 3 || (limit >> 8) & 3) { pr_err("Node %d using interleaving mode %lx/%lx\n", nodeid, (base >> 8) & 3, (limit >> 8) & 3); - return -1; + return -EINVAL; } if (node_isset(nodeid, nodes_parsed)) { pr_info("Node %d already present, skipping\n", @@ -160,7 +160,7 @@ int __init amd_numa_init(unsigned long start_pfn, unsigned long end_pfn) if (prevbase > base) { pr_err("Node map not sorted %lx,%lx\n", prevbase, base); - return -1; + return -EINVAL; } pr_info("Node %d MemBase %016lx Limit %016lx\n", @@ -177,7 +177,7 @@ int __init amd_numa_init(unsigned long start_pfn, unsigned long end_pfn) } if (!found) - return -1; + return -ENOENT; return 0; } diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index d7e4aafd075..a083f515f00 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -596,7 +596,7 @@ void __init initmem_init(int acpi, int amd) #endif #ifdef CONFIG_ACPI_NUMA - if (!numa_off && acpi && !acpi_scan_nodes(0, max_pfn << PAGE_SHIFT)) + if (!numa_off && acpi && !acpi_scan_nodes()) return; nodes_clear(node_possible_map); nodes_clear(node_online_map); diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index 988b0b70ff3..4f9dbf066ca 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -359,7 +359,7 @@ void __init acpi_get_nodes(struct bootnode *physnodes, unsigned long start, #endif /* CONFIG_NUMA_EMU */ /* Use the information discovered above to actually set up the nodes. */ -int __init acpi_scan_nodes(unsigned long start, unsigned long end) +int __init acpi_scan_nodes(void) { int i; @@ -368,7 +368,7 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end) /* First clean up the node list */ for (i = 0; i < MAX_NUMNODES; i++) - cutoff_node(i, start, end); + cutoff_node(i, 0, max_pfn << PAGE_SHIFT); /* * Join together blocks on the same node, holes between -- cgit v1.2.3-18-g5258 From a9aec56afac238e4ed3980bd10b22121b83866dd Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 16 Feb 2011 12:13:06 +0100 Subject: x86-64, NUMA: Wrap acpi_numa_init() so that failure can be indicated by return value Because of the way ACPI tables are parsed, the generic acpi_numa_init() couldn't return failure when error was detected by arch hooks. Instead, the failure state was recorded and later arch dependent init hook - acpi_scan_nodes() - would fail. Wrap acpi_numa_init() with x86_acpi_numa_init() so that failure can be indicated as return value immediately. This is in preparation for further NUMA init cleanups. Signed-off-by: Tejun Heo Cc: Yinghai Lu Cc: Brian Gerst Cc: Cyrill Gorcunov Cc: Shaohui Zheng Cc: David Rientjes Cc: Ingo Molnar Cc: H. Peter Anvin --- arch/x86/include/asm/acpi.h | 1 + arch/x86/kernel/setup.c | 2 +- arch/x86/mm/srat_64.c | 10 ++++++++++ 3 files changed, 12 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h index 4e5dff9e0b3..06fb7865eff 100644 --- a/arch/x86/include/asm/acpi.h +++ b/arch/x86/include/asm/acpi.h @@ -187,6 +187,7 @@ struct bootnode; extern int acpi_numa; extern void acpi_get_nodes(struct bootnode *physnodes, unsigned long start, unsigned long end); +extern int x86_acpi_numa_init(void); extern int acpi_scan_nodes(void); #define NR_NODE_MEMBLKS (MAX_NUMNODES*2) diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 96810a3c600..c9a139c3056 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -995,7 +995,7 @@ void __init setup_arch(char **cmdline_p) /* * Parse SRAT to discover nodes. */ - acpi = !acpi_numa_init(); + acpi = !x86_acpi_numa_init(); #endif #ifdef CONFIG_AMD_NUMA diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index 4f9dbf066ca..56b92635d87 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -358,6 +358,16 @@ void __init acpi_get_nodes(struct bootnode *physnodes, unsigned long start, } #endif /* CONFIG_NUMA_EMU */ +int __init x86_acpi_numa_init(void) +{ + int ret; + + ret = acpi_numa_init(); + if (ret < 0) + return ret; + return srat_disabled() ? -EINVAL : 0; +} + /* Use the information discovered above to actually set up the nodes. */ int __init acpi_scan_nodes(void) { -- cgit v1.2.3-18-g5258 From d8fc3afc49bb226c20e37f48a4ddd493cd092837 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 16 Feb 2011 12:13:06 +0100 Subject: x86, NUMA: Move *_numa_init() invocations into initmem_init() There's no reason for these to live in setup_arch(). Move them inside initmem_init(). - v2: x86-32 initmem_init() weren't updated breaking 32bit builds. Fixed. Found by Ankita. Signed-off-by: Tejun Heo Cc: Ankita Garg Cc: Yinghai Lu Cc: Brian Gerst Cc: Cyrill Gorcunov Cc: Shaohui Zheng Cc: David Rientjes Cc: Ingo Molnar Cc: H. Peter Anvin --- arch/x86/include/asm/page_types.h | 2 +- arch/x86/kernel/setup.c | 16 +--------------- arch/x86/mm/init_32.c | 2 +- arch/x86/mm/init_64.c | 2 +- arch/x86/mm/numa_32.c | 2 +- arch/x86/mm/numa_64.c | 16 +++++++++++++++- 6 files changed, 20 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/page_types.h b/arch/x86/include/asm/page_types.h index eb9ed00355a..97e6007e4ed 100644 --- a/arch/x86/include/asm/page_types.h +++ b/arch/x86/include/asm/page_types.h @@ -56,7 +56,7 @@ extern unsigned long init_memory_mapping(unsigned long start, void init_memory_mapping_high(void); -extern void initmem_init(int acpi, int k8); +extern void initmem_init(void); extern void free_initmem(void); #endif /* !__ASSEMBLY__ */ diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index c9a139c3056..46e684f85b3 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -719,8 +719,6 @@ early_param("reservelow", parse_reservelow); void __init setup_arch(char **cmdline_p) { - int acpi = 0; - int amd = 0; unsigned long flags; #ifdef CONFIG_X86_32 @@ -991,19 +989,7 @@ void __init setup_arch(char **cmdline_p) early_acpi_boot_init(); -#ifdef CONFIG_ACPI_NUMA - /* - * Parse SRAT to discover nodes. - */ - acpi = !x86_acpi_numa_init(); -#endif - -#ifdef CONFIG_AMD_NUMA - if (!acpi) - amd = !amd_numa_init(); -#endif - - initmem_init(acpi, amd); + initmem_init(); memblock_find_dma_reserve(); dma32_reserve_bootmem(); diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c index 16adb666560..5d43fa5141c 100644 --- a/arch/x86/mm/init_32.c +++ b/arch/x86/mm/init_32.c @@ -644,7 +644,7 @@ void __init find_low_pfn_range(void) } #ifndef CONFIG_NEED_MULTIPLE_NODES -void __init initmem_init(int acpi, int k8) +void __init initmem_init(void) { #ifdef CONFIG_HIGHMEM highstart_pfn = highend_pfn = max_pfn; diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 04cc027e543..4f1f461fc1e 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -603,7 +603,7 @@ kernel_physical_mapping_init(unsigned long start, } #ifndef CONFIG_NUMA -void __init initmem_init(int acpi, int k8) +void __init initmem_init(void) { memblock_x86_register_active_regions(0, 0, max_pfn); init_memory_mapping_high(); diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c index 3249b374732..bde3906420d 100644 --- a/arch/x86/mm/numa_32.c +++ b/arch/x86/mm/numa_32.c @@ -352,7 +352,7 @@ static void init_remap_allocator(int nid) (ulong) node_remap_end_vaddr[nid]); } -void __init initmem_init(int acpi, int k8) +void __init initmem_init(void) { int nid; long kva_target_pfn; diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index a083f515f00..656b0cffda6 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include @@ -579,10 +580,23 @@ static int __init numa_emulation(unsigned long start_pfn, } #endif /* CONFIG_NUMA_EMU */ -void __init initmem_init(int acpi, int amd) +void __init initmem_init(void) { + int acpi = 0, amd = 0; int i; +#ifdef CONFIG_ACPI_NUMA + /* + * Parse SRAT to discover nodes. + */ + acpi = !x86_acpi_numa_init(); +#endif + +#ifdef CONFIG_AMD_NUMA + if (!acpi) + amd = !amd_numa_init(); +#endif + nodes_clear(node_possible_map); nodes_clear(node_online_map); -- cgit v1.2.3-18-g5258 From ffe77a4605fb2588f8666850ad3e3b196241658f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 16 Feb 2011 12:13:06 +0100 Subject: x86-64, NUMA: Restructure initmem_init() Reorganize initmem_init() such that, * Different NUMA init methods are iterated in a consistent way. * Each iteration re-initializes all the parameters and different method can be tried after a failure. * Dummy init is handled the same as other methods. Apart from how retry after failure, this patch doesn't change the behavior. The call sequences are kept equivalent across the conversion. After the change, bad_srat() doesn't need to clear apic to node mapping or worry about numa_off. Simplified accordingly. Signed-off-by: Tejun Heo Cc: Yinghai Lu Cc: Brian Gerst Cc: Cyrill Gorcunov Cc: Shaohui Zheng Cc: David Rientjes Cc: Ingo Molnar Cc: H. Peter Anvin --- arch/x86/mm/numa_64.c | 94 ++++++++++++++++++++++++++++----------------------- arch/x86/mm/srat_64.c | 4 +-- 2 files changed, 52 insertions(+), 46 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index 656b0cffda6..c984e3431cc 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -580,65 +580,73 @@ static int __init numa_emulation(unsigned long start_pfn, } #endif /* CONFIG_NUMA_EMU */ -void __init initmem_init(void) +static int dummy_numa_init(void) { - int acpi = 0, amd = 0; - int i; - -#ifdef CONFIG_ACPI_NUMA - /* - * Parse SRAT to discover nodes. - */ - acpi = !x86_acpi_numa_init(); -#endif - -#ifdef CONFIG_AMD_NUMA - if (!acpi) - amd = !amd_numa_init(); -#endif - - nodes_clear(node_possible_map); - nodes_clear(node_online_map); - -#ifdef CONFIG_NUMA_EMU - setup_physnodes(0, max_pfn << PAGE_SHIFT, acpi, amd); - if (cmdline && !numa_emulation(0, max_pfn, acpi, amd)) - return; - setup_physnodes(0, max_pfn << PAGE_SHIFT, acpi, amd); - nodes_clear(node_possible_map); - nodes_clear(node_online_map); -#endif - -#ifdef CONFIG_ACPI_NUMA - if (!numa_off && acpi && !acpi_scan_nodes()) - return; - nodes_clear(node_possible_map); - nodes_clear(node_online_map); -#endif + return 0; +} -#ifdef CONFIG_AMD_NUMA - if (!numa_off && amd && !amd_scan_nodes()) - return; - nodes_clear(node_possible_map); - nodes_clear(node_online_map); -#endif +static int dummy_scan_nodes(void) +{ printk(KERN_INFO "%s\n", numa_off ? "NUMA turned off" : "No NUMA configuration found"); - printk(KERN_INFO "Faking a node at %016lx-%016lx\n", 0LU, max_pfn << PAGE_SHIFT); + /* setup dummy node covering all memory */ memnode_shift = 63; memnodemap = memnode.embedded_map; memnodemap[0] = 0; node_set_online(0); node_set(0, node_possible_map); - for (i = 0; i < MAX_LOCAL_APIC; i++) - set_apicid_to_node(i, NUMA_NO_NODE); memblock_x86_register_active_regions(0, 0, max_pfn); init_memory_mapping_high(); setup_node_bootmem(0, 0, max_pfn << PAGE_SHIFT); numa_init_array(); + + return 0; +} + +void __init initmem_init(void) +{ + int (*numa_init[])(void) = { [2] = dummy_numa_init }; + int (*scan_nodes[])(void) = { [2] = dummy_scan_nodes }; + int i, j; + + if (!numa_off) { +#ifdef CONFIG_ACPI_NUMA + numa_init[0] = x86_acpi_numa_init; + scan_nodes[0] = acpi_scan_nodes; +#endif +#ifdef CONFIG_AMD_NUMA + numa_init[1] = amd_numa_init; + scan_nodes[1] = amd_scan_nodes; +#endif + } + + for (i = 0; i < ARRAY_SIZE(numa_init); i++) { + if (!numa_init[i]) + continue; + + for (j = 0; j < MAX_LOCAL_APIC; j++) + set_apicid_to_node(j, NUMA_NO_NODE); + + nodes_clear(node_possible_map); + nodes_clear(node_online_map); + + if (numa_init[i]() < 0) + continue; +#ifdef CONFIG_NUMA_EMU + setup_physnodes(0, max_pfn << PAGE_SHIFT, i == 0, i == 1); + if (cmdline && !numa_emulation(0, max_pfn, i == 0, i == 1)) + return; + setup_physnodes(0, max_pfn << PAGE_SHIFT, i == 0, i == 1); + nodes_clear(node_possible_map); + nodes_clear(node_online_map); +#endif + if (!scan_nodes[i]()) + return; + } + BUG(); } unsigned long __init numa_free_all_bootmem(void) diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index 56b92635d87..597e011cfb5 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -78,8 +78,6 @@ static __init void bad_srat(void) int i; printk(KERN_ERR "SRAT: SRAT not used.\n"); acpi_numa = -1; - for (i = 0; i < MAX_LOCAL_APIC; i++) - set_apicid_to_node(i, NUMA_NO_NODE); for (i = 0; i < MAX_NUMNODES; i++) { nodes[i].start = nodes[i].end = 0; nodes_add[i].start = nodes_add[i].end = 0; @@ -89,7 +87,7 @@ static __init void bad_srat(void) static __init inline int srat_disabled(void) { - return numa_off || acpi_numa < 0; + return acpi_numa < 0; } /* Callback for SLIT parsing */ -- cgit v1.2.3-18-g5258 From ec8cf29b1d39aeb6ef98bc589f0c9a33a8f94c49 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 16 Feb 2011 12:13:07 +0100 Subject: x86-64, NUMA: Use common {cpu|mem}_nodes_parsed ACPI and amd are using separate nodes_parsed masks. Add {cpu|mem}_nodes_parsed and use them in all NUMA init methods. Initialization of the masks and building node_possible_map are now handled commonly by initmem_init(). dummy_numa_init() is updated to set node 0 on both masks. While at it, move the info messages from scan to init. Signed-off-by: Tejun Heo Cc: Yinghai Lu Cc: Brian Gerst Cc: Cyrill Gorcunov Cc: Shaohui Zheng Cc: David Rientjes Cc: Ingo Molnar Cc: H. Peter Anvin --- arch/x86/include/asm/numa_64.h | 3 +++ arch/x86/mm/amdtopology_64.c | 10 ++++------ arch/x86/mm/numa_64.c | 25 ++++++++++++++++++------- arch/x86/mm/srat_64.c | 17 ++++++----------- 4 files changed, 31 insertions(+), 24 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/numa_64.h b/arch/x86/include/asm/numa_64.h index 2819afa3363..de459365d52 100644 --- a/arch/x86/include/asm/numa_64.h +++ b/arch/x86/include/asm/numa_64.h @@ -27,6 +27,9 @@ extern void setup_node_bootmem(int nodeid, unsigned long start, */ #define NODE_MIN_SIZE (4*1024*1024) +extern nodemask_t cpu_nodes_parsed __initdata; +extern nodemask_t mem_nodes_parsed __initdata; + extern int __cpuinit numa_cpu_node(int cpu); #ifdef CONFIG_NUMA_EMU diff --git a/arch/x86/mm/amdtopology_64.c b/arch/x86/mm/amdtopology_64.c index 655ccffc6ee..4f822a24712 100644 --- a/arch/x86/mm/amdtopology_64.c +++ b/arch/x86/mm/amdtopology_64.c @@ -28,7 +28,6 @@ static struct bootnode __initdata nodes[8]; static unsigned char __initdata nodeids[8]; -static nodemask_t __initdata nodes_parsed = NODE_MASK_NONE; static __init int find_northbridge(void) { @@ -123,7 +122,7 @@ int __init amd_numa_init(void) nodeid, (base >> 8) & 3, (limit >> 8) & 3); return -EINVAL; } - if (node_isset(nodeid, nodes_parsed)) { + if (node_isset(nodeid, mem_nodes_parsed)) { pr_info("Node %d already present, skipping\n", nodeid); continue; @@ -173,7 +172,8 @@ int __init amd_numa_init(void) prevbase = base; - node_set(nodeid, nodes_parsed); + node_set(nodeid, mem_nodes_parsed); + node_set(nodeid, cpu_nodes_parsed); } if (!found) @@ -190,7 +190,7 @@ void __init amd_get_nodes(struct bootnode *physnodes) { int i; - for_each_node_mask(i, nodes_parsed) { + for_each_node_mask(i, mem_nodes_parsed) { physnodes[i].start = nodes[i].start; physnodes[i].end = nodes[i].end; } @@ -258,8 +258,6 @@ int __init amd_scan_nodes(void) unsigned int apicid_base; int i; - BUG_ON(nodes_empty(nodes_parsed)); - node_possible_map = nodes_parsed; memnode_shift = compute_hash_shift(nodes, 8, NULL); if (memnode_shift < 0) { pr_err("No NUMA node hash function found. Contact maintainer\n"); diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index c984e3431cc..4404e1d649a 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -25,6 +25,9 @@ struct pglist_data *node_data[MAX_NUMNODES] __read_mostly; EXPORT_SYMBOL(node_data); +nodemask_t cpu_nodes_parsed __initdata; +nodemask_t mem_nodes_parsed __initdata; + struct memnode memnode; static unsigned long __initdata nodemap_addr; @@ -581,23 +584,24 @@ static int __init numa_emulation(unsigned long start_pfn, #endif /* CONFIG_NUMA_EMU */ static int dummy_numa_init(void) -{ - return 0; -} - -static int dummy_scan_nodes(void) { printk(KERN_INFO "%s\n", numa_off ? "NUMA turned off" : "No NUMA configuration found"); printk(KERN_INFO "Faking a node at %016lx-%016lx\n", 0LU, max_pfn << PAGE_SHIFT); + node_set(0, cpu_nodes_parsed); + node_set(0, mem_nodes_parsed); + + return 0; +} + +static int dummy_scan_nodes(void) +{ /* setup dummy node covering all memory */ memnode_shift = 63; memnodemap = memnode.embedded_map; memnodemap[0] = 0; - node_set_online(0); - node_set(0, node_possible_map); memblock_x86_register_active_regions(0, 0, max_pfn); init_memory_mapping_high(); setup_node_bootmem(0, 0, max_pfn << PAGE_SHIFT); @@ -630,6 +634,8 @@ void __init initmem_init(void) for (j = 0; j < MAX_LOCAL_APIC; j++) set_apicid_to_node(j, NUMA_NO_NODE); + nodes_clear(cpu_nodes_parsed); + nodes_clear(mem_nodes_parsed); nodes_clear(node_possible_map); nodes_clear(node_online_map); @@ -643,6 +649,11 @@ void __init initmem_init(void) nodes_clear(node_possible_map); nodes_clear(node_online_map); #endif + /* Account for nodes with cpus and no memory */ + nodes_or(node_possible_map, mem_nodes_parsed, cpu_nodes_parsed); + if (WARN_ON(nodes_empty(node_possible_map))) + continue; + if (!scan_nodes[i]()) return; } diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index 597e011cfb5..33e72ec4fa4 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -28,8 +28,6 @@ int acpi_numa __initdata; static struct acpi_table_slit *acpi_slit; -static nodemask_t nodes_parsed __initdata; -static nodemask_t cpu_nodes_parsed __initdata; static struct bootnode nodes[MAX_NUMNODES] __initdata; static struct bootnode nodes_add[MAX_NUMNODES]; @@ -293,7 +291,7 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) if (!(ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE)) { nd = &nodes[node]; - if (!node_test_and_set(node, nodes_parsed)) { + if (!node_test_and_set(node, mem_nodes_parsed)) { nd->start = start; nd->end = end; } else { @@ -319,7 +317,7 @@ static int __init nodes_cover_memory(const struct bootnode *nodes) unsigned long pxmram, e820ram; pxmram = 0; - for_each_node_mask(i, nodes_parsed) { + for_each_node_mask(i, mem_nodes_parsed) { unsigned long s = nodes[i].start >> PAGE_SHIFT; unsigned long e = nodes[i].end >> PAGE_SHIFT; pxmram += e - s; @@ -348,7 +346,7 @@ void __init acpi_get_nodes(struct bootnode *physnodes, unsigned long start, { int i; - for_each_node_mask(i, nodes_parsed) { + for_each_node_mask(i, mem_nodes_parsed) { cutoff_node(i, start, end); physnodes[i].start = nodes[i].start; physnodes[i].end = nodes[i].end; @@ -449,9 +447,6 @@ int __init acpi_scan_nodes(void) init_memory_mapping_high(); - /* Account for nodes with cpus and no memory */ - nodes_or(node_possible_map, nodes_parsed, cpu_nodes_parsed); - /* Finally register nodes */ for_each_node_mask(i, node_possible_map) setup_node_bootmem(i, nodes[i].start, nodes[i].end); @@ -485,7 +480,7 @@ static int __init find_node_by_addr(unsigned long addr) int ret = NUMA_NO_NODE; int i; - for_each_node_mask(i, nodes_parsed) { + for_each_node_mask(i, mem_nodes_parsed) { /* * Find the real node that this emulated node appears on. For * the sake of simplicity, we only use a real node's starting @@ -545,10 +540,10 @@ void __init acpi_fake_nodes(const struct bootnode *fake_nodes, int num_nodes) __acpi_map_pxm_to_node(fake_node_to_pxm_map[i], i); memcpy(__apicid_to_node, fake_apicid_to_node, sizeof(__apicid_to_node)); - nodes_clear(nodes_parsed); + nodes_clear(mem_nodes_parsed); for (i = 0; i < num_nodes; i++) if (fake_nodes[i].start != fake_nodes[i].end) - node_set(i, nodes_parsed); + node_set(i, mem_nodes_parsed); } static int null_slit_node_compare(int a, int b) -- cgit v1.2.3-18-g5258 From 99df738cd28cc39054cd1a77685d4a94ed2193a4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 16 Feb 2011 12:13:07 +0100 Subject: x86-64, NUMA: Remove local variable found from amd_numa_init() Use weight count on mem_nodes_parsed instead. Signed-off-by: Tejun Heo Cc: Yinghai Lu Cc: Brian Gerst Cc: Cyrill Gorcunov Cc: Shaohui Zheng Cc: David Rientjes Cc: Ingo Molnar Cc: H. Peter Anvin --- arch/x86/mm/amdtopology_64.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/amdtopology_64.c b/arch/x86/mm/amdtopology_64.c index 4f822a24712..7d85cf7e032 100644 --- a/arch/x86/mm/amdtopology_64.c +++ b/arch/x86/mm/amdtopology_64.c @@ -74,7 +74,7 @@ int __init amd_numa_init(void) unsigned long end = PFN_PHYS(max_pfn); unsigned numnodes; unsigned long prevbase; - int i, nb, found = 0; + int i, nb; u32 nodeid, reg; if (!early_pci_allowed()) @@ -165,8 +165,6 @@ int __init amd_numa_init(void) pr_info("Node %d MemBase %016lx Limit %016lx\n", nodeid, base, limit); - found++; - nodes[nodeid].start = base; nodes[nodeid].end = limit; @@ -176,7 +174,7 @@ int __init amd_numa_init(void) node_set(nodeid, cpu_nodes_parsed); } - if (!found) + if (!nodes_weight(mem_nodes_parsed)) return -ENOENT; return 0; } -- cgit v1.2.3-18-g5258 From 45fe6c78c4ccc384044d1b4877eebe7acf359e76 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 16 Feb 2011 12:13:07 +0100 Subject: x86-64, NUMA: Move apicid to numa mapping initialization from amd_scan_nodes() to amd_numa_init() This brings amd initialization behavior closer to that of acpi. Signed-off-by: Tejun Heo Cc: Yinghai Lu Cc: Brian Gerst Cc: Cyrill Gorcunov Cc: Shaohui Zheng Cc: David Rientjes Cc: Ingo Molnar Cc: H. Peter Anvin --- arch/x86/mm/amdtopology_64.c | 43 +++++++++++++++++++++++-------------------- 1 file changed, 23 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/amdtopology_64.c b/arch/x86/mm/amdtopology_64.c index 7d85cf7e032..b6029a6b129 100644 --- a/arch/x86/mm/amdtopology_64.c +++ b/arch/x86/mm/amdtopology_64.c @@ -74,8 +74,9 @@ int __init amd_numa_init(void) unsigned long end = PFN_PHYS(max_pfn); unsigned numnodes; unsigned long prevbase; - int i, nb; + int i, j, nb; u32 nodeid, reg; + unsigned int bits, cores, apicid_base; if (!early_pci_allowed()) return -EINVAL; @@ -176,6 +177,26 @@ int __init amd_numa_init(void) if (!nodes_weight(mem_nodes_parsed)) return -ENOENT; + + /* + * We seem to have valid NUMA configuration. Map apicids to nodes + * using the coreid bits from early_identify_cpu. + */ + bits = boot_cpu_data.x86_coreid_bits; + cores = 1 << bits; + apicid_base = 0; + + /* get the APIC ID of the BSP early for systems with apicid lifting */ + early_get_boot_cpu_id(); + if (boot_cpu_physical_apicid > 0) { + pr_info("BSP APIC ID: %02x\n", boot_cpu_physical_apicid); + apicid_base = boot_cpu_physical_apicid; + } + + for_each_node_mask(i, cpu_nodes_parsed) + for (j = apicid_base; j < cores + apicid_base; j++) + set_apicid_to_node((i << bits) + j, i); + return 0; } @@ -251,9 +272,6 @@ void __init amd_fake_nodes(const struct bootnode *nodes, int nr_nodes) int __init amd_scan_nodes(void) { - unsigned int bits; - unsigned int cores; - unsigned int apicid_base; int i; memnode_shift = compute_hash_shift(nodes, 8, NULL); @@ -264,28 +282,13 @@ int __init amd_scan_nodes(void) pr_info("Using node hash shift of %d\n", memnode_shift); /* use the coreid bits from early_identify_cpu */ - bits = boot_cpu_data.x86_coreid_bits; - cores = (1< 0) { - pr_info("BSP APIC ID: %02x\n", boot_cpu_physical_apicid); - apicid_base = boot_cpu_physical_apicid; - } - for_each_node_mask(i, node_possible_map) memblock_x86_register_active_regions(i, nodes[i].start >> PAGE_SHIFT, nodes[i].end >> PAGE_SHIFT); init_memory_mapping_high(); - for_each_node_mask(i, node_possible_map) { - int j; - - for (j = apicid_base; j < cores + apicid_base; j++) - set_apicid_to_node((i << bits) + j, i); + for_each_node_mask(i, node_possible_map) setup_node_bootmem(i, nodes[i].start, nodes[i].end); - } numa_init_array(); return 0; -- cgit v1.2.3-18-g5258 From 206e42087a037fa3adca8908fd318a0cb64d4dee Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 16 Feb 2011 12:13:07 +0100 Subject: x86-64, NUMA: Use common numa_nodes[] ACPI and amd are using separate nodes[] array. Add numa_nodes[] and use them in all NUMA init methods. cutoff_node() cleanup is moved from srat_64.c to numa_64.c and applied in initmem_init() regardless of init methods. Signed-off-by: Tejun Heo Cc: Yinghai Lu Cc: Brian Gerst Cc: Cyrill Gorcunov Cc: Shaohui Zheng Cc: David Rientjes Cc: Ingo Molnar Cc: H. Peter Anvin --- arch/x86/include/asm/numa_64.h | 1 + arch/x86/mm/amdtopology_64.c | 19 +++++++++---------- arch/x86/mm/numa_64.c | 24 +++++++++++++++++++++++ arch/x86/mm/srat_64.c | 43 +++++++++++------------------------------- 4 files changed, 45 insertions(+), 42 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/numa_64.h b/arch/x86/include/asm/numa_64.h index de459365d52..d3a45147d09 100644 --- a/arch/x86/include/asm/numa_64.h +++ b/arch/x86/include/asm/numa_64.h @@ -29,6 +29,7 @@ extern void setup_node_bootmem(int nodeid, unsigned long start, extern nodemask_t cpu_nodes_parsed __initdata; extern nodemask_t mem_nodes_parsed __initdata; +extern struct bootnode numa_nodes[MAX_NUMNODES] __initdata; extern int __cpuinit numa_cpu_node(int cpu); diff --git a/arch/x86/mm/amdtopology_64.c b/arch/x86/mm/amdtopology_64.c index b6029a6b129..f049fa67ed7 100644 --- a/arch/x86/mm/amdtopology_64.c +++ b/arch/x86/mm/amdtopology_64.c @@ -26,7 +26,6 @@ #include #include -static struct bootnode __initdata nodes[8]; static unsigned char __initdata nodeids[8]; static __init int find_northbridge(void) @@ -166,8 +165,8 @@ int __init amd_numa_init(void) pr_info("Node %d MemBase %016lx Limit %016lx\n", nodeid, base, limit); - nodes[nodeid].start = base; - nodes[nodeid].end = limit; + numa_nodes[nodeid].start = base; + numa_nodes[nodeid].end = limit; prevbase = base; @@ -210,8 +209,8 @@ void __init amd_get_nodes(struct bootnode *physnodes) int i; for_each_node_mask(i, mem_nodes_parsed) { - physnodes[i].start = nodes[i].start; - physnodes[i].end = nodes[i].end; + physnodes[i].start = numa_nodes[i].start; + physnodes[i].end = numa_nodes[i].end; } } @@ -221,7 +220,7 @@ static int __init find_node_by_addr(unsigned long addr) int i; for (i = 0; i < 8; i++) - if (addr >= nodes[i].start && addr < nodes[i].end) { + if (addr >= numa_nodes[i].start && addr < numa_nodes[i].end) { ret = i; break; } @@ -274,7 +273,7 @@ int __init amd_scan_nodes(void) { int i; - memnode_shift = compute_hash_shift(nodes, 8, NULL); + memnode_shift = compute_hash_shift(numa_nodes, 8, NULL); if (memnode_shift < 0) { pr_err("No NUMA node hash function found. Contact maintainer\n"); return -1; @@ -284,11 +283,11 @@ int __init amd_scan_nodes(void) /* use the coreid bits from early_identify_cpu */ for_each_node_mask(i, node_possible_map) memblock_x86_register_active_regions(i, - nodes[i].start >> PAGE_SHIFT, - nodes[i].end >> PAGE_SHIFT); + numa_nodes[i].start >> PAGE_SHIFT, + numa_nodes[i].end >> PAGE_SHIFT); init_memory_mapping_high(); for_each_node_mask(i, node_possible_map) - setup_node_bootmem(i, nodes[i].start, nodes[i].end); + setup_node_bootmem(i, numa_nodes[i].start, numa_nodes[i].end); numa_init_array(); return 0; diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index 4404e1d649a..a6b899f7ddd 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -33,6 +33,8 @@ struct memnode memnode; static unsigned long __initdata nodemap_addr; static unsigned long __initdata nodemap_size; +struct bootnode numa_nodes[MAX_NUMNODES] __initdata; + /* * Given a shift value, try to populate memnodemap[] * Returns : @@ -182,6 +184,22 @@ static void * __init early_node_mem(int nodeid, unsigned long start, return NULL; } +static __init void cutoff_node(int i, unsigned long start, unsigned long end) +{ + struct bootnode *nd = &numa_nodes[i]; + + if (nd->start < start) { + nd->start = start; + if (nd->end < nd->start) + nd->start = nd->end; + } + if (nd->end > end) { + nd->end = end; + if (nd->start > nd->end) + nd->start = nd->end; + } +} + /* Initialize bootmem allocator for a node */ void __init setup_node_bootmem(int nodeid, unsigned long start, unsigned long end) @@ -638,9 +656,15 @@ void __init initmem_init(void) nodes_clear(mem_nodes_parsed); nodes_clear(node_possible_map); nodes_clear(node_online_map); + memset(numa_nodes, 0, sizeof(numa_nodes)); if (numa_init[i]() < 0) continue; + + /* clean up the node list */ + for (j = 0; j < MAX_NUMNODES; j++) + cutoff_node(j, 0, max_pfn << PAGE_SHIFT); + #ifdef CONFIG_NUMA_EMU setup_physnodes(0, max_pfn << PAGE_SHIFT, i == 0, i == 1); if (cmdline && !numa_emulation(0, max_pfn, i == 0, i == 1)) diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index 33e72ec4fa4..bfa4a6af5cf 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -28,7 +28,6 @@ int acpi_numa __initdata; static struct acpi_table_slit *acpi_slit; -static struct bootnode nodes[MAX_NUMNODES] __initdata; static struct bootnode nodes_add[MAX_NUMNODES]; static int num_node_memblks __initdata; @@ -55,29 +54,13 @@ static __init int conflicting_memblks(unsigned long start, unsigned long end) return -1; } -static __init void cutoff_node(int i, unsigned long start, unsigned long end) -{ - struct bootnode *nd = &nodes[i]; - - if (nd->start < start) { - nd->start = start; - if (nd->end < nd->start) - nd->start = nd->end; - } - if (nd->end > end) { - nd->end = end; - if (nd->start > nd->end) - nd->start = nd->end; - } -} - static __init void bad_srat(void) { int i; printk(KERN_ERR "SRAT: SRAT not used.\n"); acpi_numa = -1; for (i = 0; i < MAX_NUMNODES; i++) { - nodes[i].start = nodes[i].end = 0; + numa_nodes[i].start = numa_nodes[i].end = 0; nodes_add[i].start = nodes_add[i].end = 0; } remove_all_active_ranges(); @@ -276,12 +259,12 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) if (i == node) { printk(KERN_WARNING "SRAT: Warning: PXM %d (%lx-%lx) overlaps with itself (%Lx-%Lx)\n", - pxm, start, end, nodes[i].start, nodes[i].end); + pxm, start, end, numa_nodes[i].start, numa_nodes[i].end); } else if (i >= 0) { printk(KERN_ERR "SRAT: PXM %d (%lx-%lx) overlaps with PXM %d (%Lx-%Lx)\n", pxm, start, end, node_to_pxm(i), - nodes[i].start, nodes[i].end); + numa_nodes[i].start, numa_nodes[i].end); bad_srat(); return; } @@ -290,7 +273,7 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) start, end); if (!(ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE)) { - nd = &nodes[node]; + nd = &numa_nodes[node]; if (!node_test_and_set(node, mem_nodes_parsed)) { nd->start = start; nd->end = end; @@ -347,9 +330,8 @@ void __init acpi_get_nodes(struct bootnode *physnodes, unsigned long start, int i; for_each_node_mask(i, mem_nodes_parsed) { - cutoff_node(i, start, end); - physnodes[i].start = nodes[i].start; - physnodes[i].end = nodes[i].end; + physnodes[i].start = numa_nodes[i].start; + physnodes[i].end = numa_nodes[i].end; } } #endif /* CONFIG_NUMA_EMU */ @@ -372,10 +354,6 @@ int __init acpi_scan_nodes(void) if (acpi_numa <= 0) return -1; - /* First clean up the node list */ - for (i = 0; i < MAX_NUMNODES; i++) - cutoff_node(i, 0, max_pfn << PAGE_SHIFT); - /* * Join together blocks on the same node, holes between * which don't overlap with memory on other nodes. @@ -440,7 +418,7 @@ int __init acpi_scan_nodes(void) /* for out of order entries in SRAT */ sort_node_map(); - if (!nodes_cover_memory(nodes)) { + if (!nodes_cover_memory(numa_nodes)) { bad_srat(); return -1; } @@ -449,12 +427,13 @@ int __init acpi_scan_nodes(void) /* Finally register nodes */ for_each_node_mask(i, node_possible_map) - setup_node_bootmem(i, nodes[i].start, nodes[i].end); + setup_node_bootmem(i, numa_nodes[i].start, numa_nodes[i].end); /* Try again in case setup_node_bootmem missed one due to missing bootmem */ for_each_node_mask(i, node_possible_map) if (!node_online(i)) - setup_node_bootmem(i, nodes[i].start, nodes[i].end); + setup_node_bootmem(i, numa_nodes[i].start, + numa_nodes[i].end); for (i = 0; i < nr_cpu_ids; i++) { int node = early_cpu_to_node(i); @@ -486,7 +465,7 @@ static int __init find_node_by_addr(unsigned long addr) * the sake of simplicity, we only use a real node's starting * address to determine which emulated node it appears on. */ - if (addr >= nodes[i].start && addr < nodes[i].end) { + if (addr >= numa_nodes[i].start && addr < numa_nodes[i].end) { ret = i; break; } -- cgit v1.2.3-18-g5258 From 19095548704ecd0f32fd5deba01d56430ad7a344 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 16 Feb 2011 12:13:07 +0100 Subject: x86-64, NUMA: Kill {acpi|amd}_get_nodes() With common numa_nodes[], common code in numa_64.c can access it directly. Copy directly and kill {acpi|amd}_get_nodes(). Signed-off-by: Tejun Heo Cc: Yinghai Lu Cc: Brian Gerst Cc: Cyrill Gorcunov Cc: Shaohui Zheng Cc: David Rientjes Cc: Ingo Molnar Cc: H. Peter Anvin --- arch/x86/include/asm/acpi.h | 2 -- arch/x86/include/asm/amd_nb.h | 1 - arch/x86/mm/amdtopology_64.c | 10 ---------- arch/x86/mm/numa_64.c | 23 ++++++++++------------- arch/x86/mm/srat_64.c | 13 ------------- 5 files changed, 10 insertions(+), 39 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h index 06fb7865eff..446a5b9a1d5 100644 --- a/arch/x86/include/asm/acpi.h +++ b/arch/x86/include/asm/acpi.h @@ -185,8 +185,6 @@ struct bootnode; #ifdef CONFIG_ACPI_NUMA extern int acpi_numa; -extern void acpi_get_nodes(struct bootnode *physnodes, unsigned long start, - unsigned long end); extern int x86_acpi_numa_init(void); extern int acpi_scan_nodes(void); #define NR_NODE_MEMBLKS (MAX_NUMNODES*2) diff --git a/arch/x86/include/asm/amd_nb.h b/arch/x86/include/asm/amd_nb.h index dc3c6e34da1..246cdc6ca9b 100644 --- a/arch/x86/include/asm/amd_nb.h +++ b/arch/x86/include/asm/amd_nb.h @@ -23,7 +23,6 @@ extern int amd_set_subcaches(int, int); #ifdef CONFIG_NUMA_EMU extern void amd_fake_nodes(const struct bootnode *nodes, int nr_nodes); -extern void amd_get_nodes(struct bootnode *nodes); #endif struct amd_northbridge { diff --git a/arch/x86/mm/amdtopology_64.c b/arch/x86/mm/amdtopology_64.c index f049fa67ed7..cf29527885f 100644 --- a/arch/x86/mm/amdtopology_64.c +++ b/arch/x86/mm/amdtopology_64.c @@ -204,16 +204,6 @@ static s16 fake_apicid_to_node[MAX_LOCAL_APIC] __initdata = { [0 ... MAX_LOCAL_APIC-1] = NUMA_NO_NODE }; -void __init amd_get_nodes(struct bootnode *physnodes) -{ - int i; - - for_each_node_mask(i, mem_nodes_parsed) { - physnodes[i].start = numa_nodes[i].start; - physnodes[i].end = numa_nodes[i].end; - } -} - static int __init find_node_by_addr(unsigned long addr) { int ret = NUMA_NO_NODE; diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index a6b899f7ddd..82ee3083b09 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -257,21 +257,18 @@ void __init numa_emu_cmdline(char *str) cmdline = str; } -static int __init setup_physnodes(unsigned long start, unsigned long end, - int acpi, int amd) +static int __init setup_physnodes(unsigned long start, unsigned long end) { int ret = 0; int i; memset(physnodes, 0, sizeof(physnodes)); -#ifdef CONFIG_ACPI_NUMA - if (acpi) - acpi_get_nodes(physnodes, start, end); -#endif -#ifdef CONFIG_AMD_NUMA - if (amd) - amd_get_nodes(physnodes); -#endif + + for_each_node_mask(i, mem_nodes_parsed) { + physnodes[i].start = numa_nodes[i].start; + physnodes[i].end = numa_nodes[i].end; + } + /* * Basic sanity checking on the physical node map: there may be errors * if the SRAT or AMD code incorrectly reported the topology or the mem= @@ -594,7 +591,7 @@ static int __init numa_emulation(unsigned long start_pfn, init_memory_mapping_high(); for_each_node_mask(i, node_possible_map) setup_node_bootmem(i, nodes[i].start, nodes[i].end); - setup_physnodes(addr, max_addr, acpi, amd); + setup_physnodes(addr, max_addr); fake_physnodes(acpi, amd, num_nodes); numa_init_array(); return 0; @@ -666,10 +663,10 @@ void __init initmem_init(void) cutoff_node(j, 0, max_pfn << PAGE_SHIFT); #ifdef CONFIG_NUMA_EMU - setup_physnodes(0, max_pfn << PAGE_SHIFT, i == 0, i == 1); + setup_physnodes(0, max_pfn << PAGE_SHIFT); if (cmdline && !numa_emulation(0, max_pfn, i == 0, i == 1)) return; - setup_physnodes(0, max_pfn << PAGE_SHIFT, i == 0, i == 1); + setup_physnodes(0, max_pfn << PAGE_SHIFT); nodes_clear(node_possible_map); nodes_clear(node_online_map); #endif diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index bfa4a6af5cf..82b1087963a 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -323,19 +323,6 @@ static int __init nodes_cover_memory(const struct bootnode *nodes) void __init acpi_numa_arch_fixup(void) {} -#ifdef CONFIG_NUMA_EMU -void __init acpi_get_nodes(struct bootnode *physnodes, unsigned long start, - unsigned long end) -{ - int i; - - for_each_node_mask(i, mem_nodes_parsed) { - physnodes[i].start = numa_nodes[i].start; - physnodes[i].end = numa_nodes[i].end; - } -} -#endif /* CONFIG_NUMA_EMU */ - int __init x86_acpi_numa_init(void) { int ret; -- cgit v1.2.3-18-g5258 From 7d44ec193d95416d1342cdd86392a1eeb7461186 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Wed, 16 Feb 2011 14:08:02 +0300 Subject: perf, x86: P4 PMU: Fix spurious NMI messages Several people have reported spurious unknown NMI messages on some P4 CPUs. This patch fixes it by checking for an overflow (negative counter values) directly, instead of relying on the P4_CCCR_OVF bit. Reported-by: George Spelvin Reported-by: Meelis Roos Reported-by: Don Zickus Reported-by: Dave Airlie Signed-off-by: Cyrill Gorcunov Cc: Lin Ming Cc: Don Zickus Cc: Peter Zijlstra LKML-Reference: Signed-off-by: Ingo Molnar --- arch/x86/include/asm/perf_event_p4.h | 1 + arch/x86/kernel/cpu/perf_event_p4.c | 11 ++++++++--- 2 files changed, 9 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/perf_event_p4.h b/arch/x86/include/asm/perf_event_p4.h index e2f6a99f14a..cc29086e30c 100644 --- a/arch/x86/include/asm/perf_event_p4.h +++ b/arch/x86/include/asm/perf_event_p4.h @@ -22,6 +22,7 @@ #define ARCH_P4_CNTRVAL_BITS (40) #define ARCH_P4_CNTRVAL_MASK ((1ULL << ARCH_P4_CNTRVAL_BITS) - 1) +#define ARCH_P4_UNFLAGGED_BIT ((1ULL) << (ARCH_P4_CNTRVAL_BITS - 1)) #define P4_ESCR_EVENT_MASK 0x7e000000U #define P4_ESCR_EVENT_SHIFT 25 diff --git a/arch/x86/kernel/cpu/perf_event_p4.c b/arch/x86/kernel/cpu/perf_event_p4.c index f7a0993c1e7..ff751a9f182 100644 --- a/arch/x86/kernel/cpu/perf_event_p4.c +++ b/arch/x86/kernel/cpu/perf_event_p4.c @@ -770,9 +770,14 @@ static inline int p4_pmu_clear_cccr_ovf(struct hw_perf_event *hwc) return 1; } - /* it might be unflagged overflow */ - rdmsrl(hwc->event_base + hwc->idx, v); - if (!(v & ARCH_P4_CNTRVAL_MASK)) + /* + * In some circumstances the overflow might issue an NMI but did + * not set P4_CCCR_OVF bit. Because a counter holds a negative value + * we simply check for high bit being set, if it's cleared it means + * the counter has reached zero value and continued counting before + * real NMI signal was received: + */ + if (!(v & ARCH_P4_UNFLAGGED_BIT)) return 1; return 0; -- cgit v1.2.3-18-g5258 From d45dd923fcc620c948bd1eda16cc61426ac31646 Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Wed, 2 Feb 2011 17:40:56 +0100 Subject: perf, x86: Use helper function in x86_pmu_enable_all() Use helper function in x86_pmu_enable_all() to minimize access to x86_pmu.eventsel in the fast path. The counter's msr address is now calculated using struct hw_perf_event. Later we add code that calculates the msr addresses with a table lookup which shouldn't be done in the fast path. Signed-off-by: Robert Richter Signed-off-by: Peter Zijlstra LKML-Reference: <1296664860-10886-2-git-send-email-robert.richter@amd.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perf_event.c | 19 ++++++++----------- 1 file changed, 8 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index 4d98789b066..70d6d8fc241 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -642,21 +642,24 @@ static void x86_pmu_disable(struct pmu *pmu) x86_pmu.disable_all(); } +static inline void __x86_pmu_enable_event(struct hw_perf_event *hwc, + u64 enable_mask) +{ + wrmsrl(hwc->config_base + hwc->idx, hwc->config | enable_mask); +} + static void x86_pmu_enable_all(int added) { struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); int idx; for (idx = 0; idx < x86_pmu.num_counters; idx++) { - struct perf_event *event = cpuc->events[idx]; - u64 val; + struct hw_perf_event *hwc = &cpuc->events[idx]->hw; if (!test_bit(idx, cpuc->active_mask)) continue; - val = event->hw.config; - val |= ARCH_PERFMON_EVENTSEL_ENABLE; - wrmsrl(x86_pmu.eventsel + idx, val); + __x86_pmu_enable_event(hwc, ARCH_PERFMON_EVENTSEL_ENABLE); } } @@ -915,12 +918,6 @@ static void x86_pmu_enable(struct pmu *pmu) x86_pmu.enable_all(added); } -static inline void __x86_pmu_enable_event(struct hw_perf_event *hwc, - u64 enable_mask) -{ - wrmsrl(hwc->config_base + hwc->idx, hwc->config | enable_mask); -} - static inline void x86_pmu_disable_event(struct perf_event *event) { struct hw_perf_event *hwc = &event->hw; -- cgit v1.2.3-18-g5258 From 41bf498949a263fa0b2d32524b89d696ac330e94 Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Wed, 2 Feb 2011 17:40:57 +0100 Subject: perf, x86: Calculate perfctr msr addresses in helper functions This patch adds helper functions to calculate perfctr msr addresses. We need this to later add support for AMD family 15h cpus. For this we have to change the algorithms to generate the perfctr's msr addresses. Signed-off-by: Robert Richter Signed-off-by: Peter Zijlstra LKML-Reference: <1296664860-10886-3-git-send-email-robert.richter@amd.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perf_event.c | 36 ++++++++++++++++++++++------------ arch/x86/kernel/cpu/perf_event_intel.c | 4 ++-- 2 files changed, 25 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index 70d6d8fc241..ee40c1ad0eb 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -321,6 +321,16 @@ again: return new_raw_count; } +static inline unsigned int x86_pmu_config_addr(int index) +{ + return x86_pmu.eventsel + index; +} + +static inline unsigned int x86_pmu_event_addr(int index) +{ + return x86_pmu.perfctr + index; +} + static atomic_t active_events; static DEFINE_MUTEX(pmc_reserve_mutex); @@ -331,12 +341,12 @@ static bool reserve_pmc_hardware(void) int i; for (i = 0; i < x86_pmu.num_counters; i++) { - if (!reserve_perfctr_nmi(x86_pmu.perfctr + i)) + if (!reserve_perfctr_nmi(x86_pmu_event_addr(i))) goto perfctr_fail; } for (i = 0; i < x86_pmu.num_counters; i++) { - if (!reserve_evntsel_nmi(x86_pmu.eventsel + i)) + if (!reserve_evntsel_nmi(x86_pmu_config_addr(i))) goto eventsel_fail; } @@ -344,13 +354,13 @@ static bool reserve_pmc_hardware(void) eventsel_fail: for (i--; i >= 0; i--) - release_evntsel_nmi(x86_pmu.eventsel + i); + release_evntsel_nmi(x86_pmu_config_addr(i)); i = x86_pmu.num_counters; perfctr_fail: for (i--; i >= 0; i--) - release_perfctr_nmi(x86_pmu.perfctr + i); + release_perfctr_nmi(x86_pmu_event_addr(i)); return false; } @@ -360,8 +370,8 @@ static void release_pmc_hardware(void) int i; for (i = 0; i < x86_pmu.num_counters; i++) { - release_perfctr_nmi(x86_pmu.perfctr + i); - release_evntsel_nmi(x86_pmu.eventsel + i); + release_perfctr_nmi(x86_pmu_event_addr(i)); + release_evntsel_nmi(x86_pmu_config_addr(i)); } } @@ -382,7 +392,7 @@ static bool check_hw_exists(void) * complain and bail. */ for (i = 0; i < x86_pmu.num_counters; i++) { - reg = x86_pmu.eventsel + i; + reg = x86_pmu_config_addr(i); ret = rdmsrl_safe(reg, &val); if (ret) goto msr_fail; @@ -407,8 +417,8 @@ static bool check_hw_exists(void) * that don't trap on the MSR access and always return 0s. */ val = 0xabcdUL; - ret = checking_wrmsrl(x86_pmu.perfctr, val); - ret |= rdmsrl_safe(x86_pmu.perfctr, &val_new); + ret = checking_wrmsrl(x86_pmu_event_addr(0), val); + ret |= rdmsrl_safe(x86_pmu_event_addr(0), &val_new); if (ret || val != val_new) goto msr_fail; @@ -617,11 +627,11 @@ static void x86_pmu_disable_all(void) if (!test_bit(idx, cpuc->active_mask)) continue; - rdmsrl(x86_pmu.eventsel + idx, val); + rdmsrl(x86_pmu_config_addr(idx), val); if (!(val & ARCH_PERFMON_EVENTSEL_ENABLE)) continue; val &= ~ARCH_PERFMON_EVENTSEL_ENABLE; - wrmsrl(x86_pmu.eventsel + idx, val); + wrmsrl(x86_pmu_config_addr(idx), val); } } @@ -1110,8 +1120,8 @@ void perf_event_print_debug(void) pr_info("CPU#%d: active: %016llx\n", cpu, *(u64 *)cpuc->active_mask); for (idx = 0; idx < x86_pmu.num_counters; idx++) { - rdmsrl(x86_pmu.eventsel + idx, pmc_ctrl); - rdmsrl(x86_pmu.perfctr + idx, pmc_count); + rdmsrl(x86_pmu_config_addr(idx), pmc_ctrl); + rdmsrl(x86_pmu_event_addr(idx), pmc_count); prev_left = per_cpu(pmc_prev_left[idx], cpu); diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c index 008835c1d79..084b38362db 100644 --- a/arch/x86/kernel/cpu/perf_event_intel.c +++ b/arch/x86/kernel/cpu/perf_event_intel.c @@ -691,8 +691,8 @@ static void intel_pmu_reset(void) printk("clearing PMU state on CPU#%d\n", smp_processor_id()); for (idx = 0; idx < x86_pmu.num_counters; idx++) { - checking_wrmsrl(x86_pmu.eventsel + idx, 0ull); - checking_wrmsrl(x86_pmu.perfctr + idx, 0ull); + checking_wrmsrl(x86_pmu_config_addr(idx), 0ull); + checking_wrmsrl(x86_pmu_event_addr(idx), 0ull); } for (idx = 0; idx < x86_pmu.num_counters_fixed; idx++) checking_wrmsrl(MSR_ARCH_PERFMON_FIXED_CTR0 + idx, 0ull); -- cgit v1.2.3-18-g5258 From 69d8e1e8ac0a7d829f1c0fd5bd07eb3022d9a1a0 Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Wed, 2 Feb 2011 17:40:58 +0100 Subject: perf, x86: Add new AMD family 15h msrs to perfctr reservation code This patch allows the reservation of perfctrs with new msr addresses introduced for AMD cpu family 15h (0xc0010200/0xc0010201, etc). Signed-off-by: Robert Richter Signed-off-by: Peter Zijlstra LKML-Reference: <1296664860-10886-4-git-send-email-robert.richter@amd.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perfctr-watchdog.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c index d5a23661550..966512b2cac 100644 --- a/arch/x86/kernel/cpu/perfctr-watchdog.c +++ b/arch/x86/kernel/cpu/perfctr-watchdog.c @@ -46,6 +46,8 @@ static inline unsigned int nmi_perfctr_msr_to_bit(unsigned int msr) /* returns the bit offset of the performance counter register */ switch (boot_cpu_data.x86_vendor) { case X86_VENDOR_AMD: + if (msr >= MSR_F15H_PERF_CTR) + return (msr - MSR_F15H_PERF_CTR) >> 1; return msr - MSR_K7_PERFCTR0; case X86_VENDOR_INTEL: if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) @@ -70,6 +72,8 @@ static inline unsigned int nmi_evntsel_msr_to_bit(unsigned int msr) /* returns the bit offset of the event selection register */ switch (boot_cpu_data.x86_vendor) { case X86_VENDOR_AMD: + if (msr >= MSR_F15H_PERF_CTL) + return (msr - MSR_F15H_PERF_CTL) >> 1; return msr - MSR_K7_EVNTSEL0; case X86_VENDOR_INTEL: if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) -- cgit v1.2.3-18-g5258 From 73d6e52206a20354738418625cedc244cbfd5023 Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Wed, 2 Feb 2011 17:40:59 +0100 Subject: perf, x86: Store perfctr msr addresses in config_base/event_base Instead of storing the base addresses we can store the counter's msr addresses directly in config_base/event_base of struct hw_perf_event. This avoids recalculating the address with each msr access. The addresses are configured one time. We also need this change to later modify the address calculation. Signed-off-by: Robert Richter Signed-off-by: Peter Zijlstra LKML-Reference: <1296664860-10886-5-git-send-email-robert.richter@amd.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perf_event.c | 21 ++++++++------------- arch/x86/kernel/cpu/perf_event_p4.c | 8 ++++---- arch/x86/kernel/cpu/perf_event_p6.c | 4 ++-- 3 files changed, 14 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index ee40c1ad0eb..316194330da 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -298,7 +298,7 @@ x86_perf_event_update(struct perf_event *event) */ again: prev_raw_count = local64_read(&hwc->prev_count); - rdmsrl(hwc->event_base + idx, new_raw_count); + rdmsrl(hwc->event_base, new_raw_count); if (local64_cmpxchg(&hwc->prev_count, prev_raw_count, new_raw_count) != prev_raw_count) @@ -655,7 +655,7 @@ static void x86_pmu_disable(struct pmu *pmu) static inline void __x86_pmu_enable_event(struct hw_perf_event *hwc, u64 enable_mask) { - wrmsrl(hwc->config_base + hwc->idx, hwc->config | enable_mask); + wrmsrl(hwc->config_base, hwc->config | enable_mask); } static void x86_pmu_enable_all(int added) @@ -834,15 +834,10 @@ static inline void x86_assign_hw_event(struct perf_event *event, hwc->event_base = 0; } else if (hwc->idx >= X86_PMC_IDX_FIXED) { hwc->config_base = MSR_ARCH_PERFMON_FIXED_CTR_CTRL; - /* - * We set it so that event_base + idx in wrmsr/rdmsr maps to - * MSR_ARCH_PERFMON_FIXED_CTR0 ... CTR2: - */ - hwc->event_base = - MSR_ARCH_PERFMON_FIXED_CTR0 - X86_PMC_IDX_FIXED; + hwc->event_base = MSR_ARCH_PERFMON_FIXED_CTR0; } else { - hwc->config_base = x86_pmu.eventsel; - hwc->event_base = x86_pmu.perfctr; + hwc->config_base = x86_pmu_config_addr(hwc->idx); + hwc->event_base = x86_pmu_event_addr(hwc->idx); } } @@ -932,7 +927,7 @@ static inline void x86_pmu_disable_event(struct perf_event *event) { struct hw_perf_event *hwc = &event->hw; - wrmsrl(hwc->config_base + hwc->idx, hwc->config); + wrmsrl(hwc->config_base, hwc->config); } static DEFINE_PER_CPU(u64 [X86_PMC_IDX_MAX], pmc_prev_left); @@ -985,7 +980,7 @@ x86_perf_event_set_period(struct perf_event *event) */ local64_set(&hwc->prev_count, (u64)-left); - wrmsrl(hwc->event_base + idx, (u64)(-left) & x86_pmu.cntval_mask); + wrmsrl(hwc->event_base, (u64)(-left) & x86_pmu.cntval_mask); /* * Due to erratum on certan cpu we need @@ -993,7 +988,7 @@ x86_perf_event_set_period(struct perf_event *event) * is updated properly */ if (x86_pmu.perfctr_second_write) { - wrmsrl(hwc->event_base + idx, + wrmsrl(hwc->event_base, (u64)(-left) & x86_pmu.cntval_mask); } diff --git a/arch/x86/kernel/cpu/perf_event_p4.c b/arch/x86/kernel/cpu/perf_event_p4.c index ff751a9f182..3769ac822f9 100644 --- a/arch/x86/kernel/cpu/perf_event_p4.c +++ b/arch/x86/kernel/cpu/perf_event_p4.c @@ -764,9 +764,9 @@ static inline int p4_pmu_clear_cccr_ovf(struct hw_perf_event *hwc) u64 v; /* an official way for overflow indication */ - rdmsrl(hwc->config_base + hwc->idx, v); + rdmsrl(hwc->config_base, v); if (v & P4_CCCR_OVF) { - wrmsrl(hwc->config_base + hwc->idx, v & ~P4_CCCR_OVF); + wrmsrl(hwc->config_base, v & ~P4_CCCR_OVF); return 1; } @@ -815,7 +815,7 @@ static inline void p4_pmu_disable_event(struct perf_event *event) * state we need to clear P4_CCCR_OVF, otherwise interrupt get * asserted again and again */ - (void)checking_wrmsrl(hwc->config_base + hwc->idx, + (void)checking_wrmsrl(hwc->config_base, (u64)(p4_config_unpack_cccr(hwc->config)) & ~P4_CCCR_ENABLE & ~P4_CCCR_OVF & ~P4_CCCR_RESERVED); } @@ -885,7 +885,7 @@ static void p4_pmu_enable_event(struct perf_event *event) p4_pmu_enable_pebs(hwc->config); (void)checking_wrmsrl(escr_addr, escr_conf); - (void)checking_wrmsrl(hwc->config_base + hwc->idx, + (void)checking_wrmsrl(hwc->config_base, (cccr & ~P4_CCCR_RESERVED) | P4_CCCR_ENABLE); } diff --git a/arch/x86/kernel/cpu/perf_event_p6.c b/arch/x86/kernel/cpu/perf_event_p6.c index 34ba07be2cd..20c097e3386 100644 --- a/arch/x86/kernel/cpu/perf_event_p6.c +++ b/arch/x86/kernel/cpu/perf_event_p6.c @@ -68,7 +68,7 @@ p6_pmu_disable_event(struct perf_event *event) if (cpuc->enabled) val |= ARCH_PERFMON_EVENTSEL_ENABLE; - (void)checking_wrmsrl(hwc->config_base + hwc->idx, val); + (void)checking_wrmsrl(hwc->config_base, val); } static void p6_pmu_enable_event(struct perf_event *event) @@ -81,7 +81,7 @@ static void p6_pmu_enable_event(struct perf_event *event) if (cpuc->enabled) val |= ARCH_PERFMON_EVENTSEL_ENABLE; - (void)checking_wrmsrl(hwc->config_base + hwc->idx, val); + (void)checking_wrmsrl(hwc->config_base, val); } static __initconst const struct x86_pmu p6_pmu = { -- cgit v1.2.3-18-g5258 From 4979d2729af22f6ce8faa325fc60a85a2c2daa02 Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Wed, 2 Feb 2011 17:36:12 +0100 Subject: perf, x86: Add support for AMD family 15h core counters This patch adds support for AMD family 15h core counters. There are major changes compared to family 10h. First, there is a new perfctr msr range for up to 6 counters. Northbridge counters are separate now. This patch only adds support for core counters. Second, certain events may only be scheduled on certain counters. For this we need to extend the event scheduling and constraints. We use cpu feature flags to calculate family 15h msr address offsets. This way we later can implement a faster ALTERNATIVE() version for this. Signed-off-by: Robert Richter Signed-off-by: Peter Zijlstra LKML-Reference: <20110215135210.GB5874@erda.amd.com> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/cpufeature.h | 2 + arch/x86/kernel/cpu/perf_event.c | 12 ++- arch/x86/kernel/cpu/perf_event_amd.c | 175 ++++++++++++++++++++++++++++++++++- 3 files changed, 186 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h index 220e2ea08e8..91f3e087cf2 100644 --- a/arch/x86/include/asm/cpufeature.h +++ b/arch/x86/include/asm/cpufeature.h @@ -160,6 +160,7 @@ #define X86_FEATURE_NODEID_MSR (6*32+19) /* NodeId MSR */ #define X86_FEATURE_TBM (6*32+21) /* trailing bit manipulations */ #define X86_FEATURE_TOPOEXT (6*32+22) /* topology extensions CPUID leafs */ +#define X86_FEATURE_PERFCTR_CORE (6*32+23) /* core performance counter extensions */ /* * Auxiliary flags: Linux defined - For features scattered in various @@ -279,6 +280,7 @@ extern const char * const x86_power_flags[32]; #define cpu_has_xsave boot_cpu_has(X86_FEATURE_XSAVE) #define cpu_has_hypervisor boot_cpu_has(X86_FEATURE_HYPERVISOR) #define cpu_has_pclmulqdq boot_cpu_has(X86_FEATURE_PCLMULQDQ) +#define cpu_has_perfctr_core boot_cpu_has(X86_FEATURE_PERFCTR_CORE) #if defined(CONFIG_X86_INVLPG) || defined(CONFIG_X86_64) # define cpu_has_invlpg 1 diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index 316194330da..10bfe2472d1 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -321,14 +321,22 @@ again: return new_raw_count; } +/* using X86_FEATURE_PERFCTR_CORE to later implement ALTERNATIVE() here */ +static inline int x86_pmu_addr_offset(int index) +{ + if (boot_cpu_has(X86_FEATURE_PERFCTR_CORE)) + return index << 1; + return index; +} + static inline unsigned int x86_pmu_config_addr(int index) { - return x86_pmu.eventsel + index; + return x86_pmu.eventsel + x86_pmu_addr_offset(index); } static inline unsigned int x86_pmu_event_addr(int index) { - return x86_pmu.perfctr + index; + return x86_pmu.perfctr + x86_pmu_addr_offset(index); } static atomic_t active_events; diff --git a/arch/x86/kernel/cpu/perf_event_amd.c b/arch/x86/kernel/cpu/perf_event_amd.c index 67e2202a603..461f62bbd77 100644 --- a/arch/x86/kernel/cpu/perf_event_amd.c +++ b/arch/x86/kernel/cpu/perf_event_amd.c @@ -127,6 +127,11 @@ static int amd_pmu_hw_config(struct perf_event *event) /* * AMD64 events are detected based on their event codes. */ +static inline unsigned int amd_get_event_code(struct hw_perf_event *hwc) +{ + return ((hwc->config >> 24) & 0x0f00) | (hwc->config & 0x00ff); +} + static inline int amd_is_nb_event(struct hw_perf_event *hwc) { return (hwc->config & 0xe0) == 0xe0; @@ -385,13 +390,181 @@ static __initconst const struct x86_pmu amd_pmu = { .cpu_dead = amd_pmu_cpu_dead, }; +/* AMD Family 15h */ + +#define AMD_EVENT_TYPE_MASK 0x000000F0ULL + +#define AMD_EVENT_FP 0x00000000ULL ... 0x00000010ULL +#define AMD_EVENT_LS 0x00000020ULL ... 0x00000030ULL +#define AMD_EVENT_DC 0x00000040ULL ... 0x00000050ULL +#define AMD_EVENT_CU 0x00000060ULL ... 0x00000070ULL +#define AMD_EVENT_IC_DE 0x00000080ULL ... 0x00000090ULL +#define AMD_EVENT_EX_LS 0x000000C0ULL +#define AMD_EVENT_DE 0x000000D0ULL +#define AMD_EVENT_NB 0x000000E0ULL ... 0x000000F0ULL + +/* + * AMD family 15h event code/PMC mappings: + * + * type = event_code & 0x0F0: + * + * 0x000 FP PERF_CTL[5:3] + * 0x010 FP PERF_CTL[5:3] + * 0x020 LS PERF_CTL[5:0] + * 0x030 LS PERF_CTL[5:0] + * 0x040 DC PERF_CTL[5:0] + * 0x050 DC PERF_CTL[5:0] + * 0x060 CU PERF_CTL[2:0] + * 0x070 CU PERF_CTL[2:0] + * 0x080 IC/DE PERF_CTL[2:0] + * 0x090 IC/DE PERF_CTL[2:0] + * 0x0A0 --- + * 0x0B0 --- + * 0x0C0 EX/LS PERF_CTL[5:0] + * 0x0D0 DE PERF_CTL[2:0] + * 0x0E0 NB NB_PERF_CTL[3:0] + * 0x0F0 NB NB_PERF_CTL[3:0] + * + * Exceptions: + * + * 0x003 FP PERF_CTL[3] + * 0x00B FP PERF_CTL[3] + * 0x00D FP PERF_CTL[3] + * 0x023 DE PERF_CTL[2:0] + * 0x02D LS PERF_CTL[3] + * 0x02E LS PERF_CTL[3,0] + * 0x043 CU PERF_CTL[2:0] + * 0x045 CU PERF_CTL[2:0] + * 0x046 CU PERF_CTL[2:0] + * 0x054 CU PERF_CTL[2:0] + * 0x055 CU PERF_CTL[2:0] + * 0x08F IC PERF_CTL[0] + * 0x187 DE PERF_CTL[0] + * 0x188 DE PERF_CTL[0] + * 0x0DB EX PERF_CTL[5:0] + * 0x0DC LS PERF_CTL[5:0] + * 0x0DD LS PERF_CTL[5:0] + * 0x0DE LS PERF_CTL[5:0] + * 0x0DF LS PERF_CTL[5:0] + * 0x1D6 EX PERF_CTL[5:0] + * 0x1D8 EX PERF_CTL[5:0] + */ + +static struct event_constraint amd_f15_PMC0 = EVENT_CONSTRAINT(0, 0x01, 0); +static struct event_constraint amd_f15_PMC20 = EVENT_CONSTRAINT(0, 0x07, 0); +static struct event_constraint amd_f15_PMC3 = EVENT_CONSTRAINT(0, 0x08, 0); +static struct event_constraint amd_f15_PMC30 = EVENT_CONSTRAINT(0, 0x09, 0); +static struct event_constraint amd_f15_PMC50 = EVENT_CONSTRAINT(0, 0x3F, 0); +static struct event_constraint amd_f15_PMC53 = EVENT_CONSTRAINT(0, 0x38, 0); + +static struct event_constraint * +amd_get_event_constraints_f15h(struct cpu_hw_events *cpuc, struct perf_event *event) +{ + unsigned int event_code = amd_get_event_code(&event->hw); + + switch (event_code & AMD_EVENT_TYPE_MASK) { + case AMD_EVENT_FP: + switch (event_code) { + case 0x003: + case 0x00B: + case 0x00D: + return &amd_f15_PMC3; + default: + return &amd_f15_PMC53; + } + case AMD_EVENT_LS: + case AMD_EVENT_DC: + case AMD_EVENT_EX_LS: + switch (event_code) { + case 0x023: + case 0x043: + case 0x045: + case 0x046: + case 0x054: + case 0x055: + return &amd_f15_PMC20; + case 0x02D: + return &amd_f15_PMC3; + case 0x02E: + return &amd_f15_PMC30; + default: + return &amd_f15_PMC50; + } + case AMD_EVENT_CU: + case AMD_EVENT_IC_DE: + case AMD_EVENT_DE: + switch (event_code) { + case 0x08F: + case 0x187: + case 0x188: + return &amd_f15_PMC0; + case 0x0DB ... 0x0DF: + case 0x1D6: + case 0x1D8: + return &amd_f15_PMC50; + default: + return &amd_f15_PMC20; + } + case AMD_EVENT_NB: + /* not yet implemented */ + return &emptyconstraint; + default: + return &emptyconstraint; + } +} + +static __initconst const struct x86_pmu amd_pmu_f15h = { + .name = "AMD Family 15h", + .handle_irq = x86_pmu_handle_irq, + .disable_all = x86_pmu_disable_all, + .enable_all = x86_pmu_enable_all, + .enable = x86_pmu_enable_event, + .disable = x86_pmu_disable_event, + .hw_config = amd_pmu_hw_config, + .schedule_events = x86_schedule_events, + .eventsel = MSR_F15H_PERF_CTL, + .perfctr = MSR_F15H_PERF_CTR, + .event_map = amd_pmu_event_map, + .max_events = ARRAY_SIZE(amd_perfmon_event_map), + .num_counters = 6, + .cntval_bits = 48, + .cntval_mask = (1ULL << 48) - 1, + .apic = 1, + /* use highest bit to detect overflow */ + .max_period = (1ULL << 47) - 1, + .get_event_constraints = amd_get_event_constraints_f15h, + /* nortbridge counters not yet implemented: */ +#if 0 + .put_event_constraints = amd_put_event_constraints, + + .cpu_prepare = amd_pmu_cpu_prepare, + .cpu_starting = amd_pmu_cpu_starting, + .cpu_dead = amd_pmu_cpu_dead, +#endif +}; + static __init int amd_pmu_init(void) { /* Performance-monitoring supported from K7 and later: */ if (boot_cpu_data.x86 < 6) return -ENODEV; - x86_pmu = amd_pmu; + /* + * If core performance counter extensions exists, it must be + * family 15h, otherwise fail. See x86_pmu_addr_offset(). + */ + switch (boot_cpu_data.x86) { + case 0x15: + if (!cpu_has_perfctr_core) + return -ENODEV; + x86_pmu = amd_pmu_f15h; + break; + default: + if (cpu_has_perfctr_core) + return -ENODEV; + x86_pmu = amd_pmu; + break; + } /* Events are common for all AMDs */ memcpy(hw_cache_event_ids, amd_hw_cache_event_ids, -- cgit v1.2.3-18-g5258 From ef396ec96c1a8ffd2b0bc67f1f79c7274de02b95 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 16 Feb 2011 17:11:07 +0100 Subject: x86-64, NUMA: Factor out memblk handling into numa_{add|register}_memblk() Factor out memblk handling from srat_64.c into two functions in numa_64.c. This patch doesn't introduce any behavior change. The next patch will make all init methods use these functions. - v2: Fixed build failure on 32bit due to misplaced NR_NODE_MEMBLKS. Reported by Ingo. Signed-off-by: Tejun Heo Cc: Yinghai Lu Cc: Brian Gerst Cc: Cyrill Gorcunov Cc: Shaohui Zheng Cc: David Rientjes Cc: Ingo Molnar Cc: H. Peter Anvin --- arch/x86/include/asm/acpi.h | 1 - arch/x86/include/asm/numa.h | 3 ++ arch/x86/include/asm/numa_64.h | 2 + arch/x86/mm/numa_64.c | 109 +++++++++++++++++++++++++++++++++++++++++ arch/x86/mm/srat_64.c | 96 ++---------------------------------- 5 files changed, 117 insertions(+), 94 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h index 446a5b9a1d5..12bd1fdd206 100644 --- a/arch/x86/include/asm/acpi.h +++ b/arch/x86/include/asm/acpi.h @@ -187,7 +187,6 @@ struct bootnode; extern int acpi_numa; extern int x86_acpi_numa_init(void); extern int acpi_scan_nodes(void); -#define NR_NODE_MEMBLKS (MAX_NUMNODES*2) #ifdef CONFIG_NUMA_EMU extern void acpi_fake_nodes(const struct bootnode *fake_nodes, diff --git a/arch/x86/include/asm/numa.h b/arch/x86/include/asm/numa.h index 26fc6e2dd0f..3d4dab43c99 100644 --- a/arch/x86/include/asm/numa.h +++ b/arch/x86/include/asm/numa.h @@ -5,6 +5,9 @@ #include #ifdef CONFIG_NUMA + +#define NR_NODE_MEMBLKS (MAX_NUMNODES*2) + /* * __apicid_to_node[] stores the raw mapping between physical apicid and * node and is used to initialize cpu_to_node mapping. diff --git a/arch/x86/include/asm/numa_64.h b/arch/x86/include/asm/numa_64.h index d3a45147d09..3306a2b99ec 100644 --- a/arch/x86/include/asm/numa_64.h +++ b/arch/x86/include/asm/numa_64.h @@ -32,6 +32,8 @@ extern nodemask_t mem_nodes_parsed __initdata; extern struct bootnode numa_nodes[MAX_NUMNODES] __initdata; extern int __cpuinit numa_cpu_node(int cpu); +extern int __init numa_add_memblk(int nodeid, u64 start, u64 end); +extern int __init numa_register_memblks(void); #ifdef CONFIG_NUMA_EMU #define FAKE_NODE_MIN_SIZE ((u64)32 << 20) diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index 82ee3083b09..a1d702d2584 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -33,6 +33,10 @@ struct memnode memnode; static unsigned long __initdata nodemap_addr; static unsigned long __initdata nodemap_size; +static int num_node_memblks __initdata; +static struct bootnode node_memblk_range[NR_NODE_MEMBLKS] __initdata; +static int memblk_nodeid[NR_NODE_MEMBLKS] __initdata; + struct bootnode numa_nodes[MAX_NUMNODES] __initdata; /* @@ -184,6 +188,43 @@ static void * __init early_node_mem(int nodeid, unsigned long start, return NULL; } +static __init int conflicting_memblks(unsigned long start, unsigned long end) +{ + int i; + for (i = 0; i < num_node_memblks; i++) { + struct bootnode *nd = &node_memblk_range[i]; + if (nd->start == nd->end) + continue; + if (nd->end > start && nd->start < end) + return memblk_nodeid[i]; + if (nd->end == end && nd->start == start) + return memblk_nodeid[i]; + } + return -1; +} + +int __init numa_add_memblk(int nid, u64 start, u64 end) +{ + int i; + + i = conflicting_memblks(start, end); + if (i == nid) { + printk(KERN_WARNING "NUMA: Warning: node %d (%Lx-%Lx) overlaps with itself (%Lx-%Lx)\n", + nid, start, end, numa_nodes[i].start, numa_nodes[i].end); + } else if (i >= 0) { + printk(KERN_ERR "NUMA: node %d (%Lx-%Lx) overlaps with node %d (%Lx-%Lx)\n", + nid, start, end, i, + numa_nodes[i].start, numa_nodes[i].end); + return -EINVAL; + } + + node_memblk_range[num_node_memblks].start = start; + node_memblk_range[num_node_memblks].end = end; + memblk_nodeid[num_node_memblks] = nid; + num_node_memblks++; + return 0; +} + static __init void cutoff_node(int i, unsigned long start, unsigned long end) { struct bootnode *nd = &numa_nodes[i]; @@ -246,6 +287,71 @@ setup_node_bootmem(int nodeid, unsigned long start, unsigned long end) node_set_online(nodeid); } +int __init numa_register_memblks(void) +{ + int i; + + /* + * Join together blocks on the same node, holes between + * which don't overlap with memory on other nodes. + */ + for (i = 0; i < num_node_memblks; ++i) { + int j, k; + + for (j = i + 1; j < num_node_memblks; ++j) { + unsigned long start, end; + + if (memblk_nodeid[i] != memblk_nodeid[j]) + continue; + start = min(node_memblk_range[i].end, + node_memblk_range[j].end); + end = max(node_memblk_range[i].start, + node_memblk_range[j].start); + for (k = 0; k < num_node_memblks; ++k) { + if (memblk_nodeid[i] == memblk_nodeid[k]) + continue; + if (start < node_memblk_range[k].end && + end > node_memblk_range[k].start) + break; + } + if (k < num_node_memblks) + continue; + start = min(node_memblk_range[i].start, + node_memblk_range[j].start); + end = max(node_memblk_range[i].end, + node_memblk_range[j].end); + printk(KERN_INFO "NUMA: Node %d [%Lx,%Lx) + [%Lx,%Lx) -> [%lx,%lx)\n", + memblk_nodeid[i], + node_memblk_range[i].start, + node_memblk_range[i].end, + node_memblk_range[j].start, + node_memblk_range[j].end, + start, end); + node_memblk_range[i].start = start; + node_memblk_range[i].end = end; + k = --num_node_memblks - j; + memmove(memblk_nodeid + j, memblk_nodeid + j+1, + k * sizeof(*memblk_nodeid)); + memmove(node_memblk_range + j, node_memblk_range + j+1, + k * sizeof(*node_memblk_range)); + --j; + } + } + + memnode_shift = compute_hash_shift(node_memblk_range, num_node_memblks, + memblk_nodeid); + if (memnode_shift < 0) { + printk(KERN_ERR "NUMA: No NUMA node hash function found. Contact maintainer\n"); + return -EINVAL; + } + + for (i = 0; i < num_node_memblks; i++) + memblock_x86_register_active_regions(memblk_nodeid[i], + node_memblk_range[i].start >> PAGE_SHIFT, + node_memblk_range[i].end >> PAGE_SHIFT); + return 0; +} + #ifdef CONFIG_NUMA_EMU /* Numa emulation */ static struct bootnode nodes[MAX_NUMNODES] __initdata; @@ -653,6 +759,9 @@ void __init initmem_init(void) nodes_clear(mem_nodes_parsed); nodes_clear(node_possible_map); nodes_clear(node_online_map); + num_node_memblks = 0; + memset(node_memblk_range, 0, sizeof(node_memblk_range)); + memset(memblk_nodeid, 0, sizeof(memblk_nodeid)); memset(numa_nodes, 0, sizeof(numa_nodes)); if (numa_init[i]() < 0) diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index 82b1087963a..341b37193c7 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -30,30 +30,11 @@ static struct acpi_table_slit *acpi_slit; static struct bootnode nodes_add[MAX_NUMNODES]; -static int num_node_memblks __initdata; -static struct bootnode node_memblk_range[NR_NODE_MEMBLKS] __initdata; -static int memblk_nodeid[NR_NODE_MEMBLKS] __initdata; - static __init int setup_node(int pxm) { return acpi_map_pxm_to_node(pxm); } -static __init int conflicting_memblks(unsigned long start, unsigned long end) -{ - int i; - for (i = 0; i < num_node_memblks; i++) { - struct bootnode *nd = &node_memblk_range[i]; - if (nd->start == nd->end) - continue; - if (nd->end > start && nd->start < end) - return memblk_nodeid[i]; - if (nd->end == end && nd->start == start) - return memblk_nodeid[i]; - } - return -1; -} - static __init void bad_srat(void) { int i; @@ -233,7 +214,6 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) struct bootnode *nd; unsigned long start, end; int node, pxm; - int i; if (srat_disabled()) return; @@ -255,16 +235,8 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) bad_srat(); return; } - i = conflicting_memblks(start, end); - if (i == node) { - printk(KERN_WARNING - "SRAT: Warning: PXM %d (%lx-%lx) overlaps with itself (%Lx-%Lx)\n", - pxm, start, end, numa_nodes[i].start, numa_nodes[i].end); - } else if (i >= 0) { - printk(KERN_ERR - "SRAT: PXM %d (%lx-%lx) overlaps with PXM %d (%Lx-%Lx)\n", - pxm, start, end, node_to_pxm(i), - numa_nodes[i].start, numa_nodes[i].end); + + if (numa_add_memblk(node, start, end) < 0) { bad_srat(); return; } @@ -285,11 +257,6 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) } } else update_nodes_add(node, start, end); - - node_memblk_range[num_node_memblks].start = start; - node_memblk_range[num_node_memblks].end = end; - memblk_nodeid[num_node_memblks] = node; - num_node_memblks++; } /* Sanity check to catch more bad SRATs (they are amazingly common). @@ -341,68 +308,11 @@ int __init acpi_scan_nodes(void) if (acpi_numa <= 0) return -1; - /* - * Join together blocks on the same node, holes between - * which don't overlap with memory on other nodes. - */ - for (i = 0; i < num_node_memblks; ++i) { - int j, k; - - for (j = i + 1; j < num_node_memblks; ++j) { - unsigned long start, end; - - if (memblk_nodeid[i] != memblk_nodeid[j]) - continue; - start = min(node_memblk_range[i].end, - node_memblk_range[j].end); - end = max(node_memblk_range[i].start, - node_memblk_range[j].start); - for (k = 0; k < num_node_memblks; ++k) { - if (memblk_nodeid[i] == memblk_nodeid[k]) - continue; - if (start < node_memblk_range[k].end && - end > node_memblk_range[k].start) - break; - } - if (k < num_node_memblks) - continue; - start = min(node_memblk_range[i].start, - node_memblk_range[j].start); - end = max(node_memblk_range[i].end, - node_memblk_range[j].end); - printk(KERN_INFO "SRAT: Node %d " - "[%Lx,%Lx) + [%Lx,%Lx) -> [%lx,%lx)\n", - memblk_nodeid[i], - node_memblk_range[i].start, - node_memblk_range[i].end, - node_memblk_range[j].start, - node_memblk_range[j].end, - start, end); - node_memblk_range[i].start = start; - node_memblk_range[i].end = end; - k = --num_node_memblks - j; - memmove(memblk_nodeid + j, memblk_nodeid + j+1, - k * sizeof(*memblk_nodeid)); - memmove(node_memblk_range + j, node_memblk_range + j+1, - k * sizeof(*node_memblk_range)); - --j; - } - } - - memnode_shift = compute_hash_shift(node_memblk_range, num_node_memblks, - memblk_nodeid); - if (memnode_shift < 0) { - printk(KERN_ERR - "SRAT: No NUMA node hash function found. Contact maintainer\n"); + if (numa_register_memblks() < 0) { bad_srat(); return -1; } - for (i = 0; i < num_node_memblks; i++) - memblock_x86_register_active_regions(memblk_nodeid[i], - node_memblk_range[i].start >> PAGE_SHIFT, - node_memblk_range[i].end >> PAGE_SHIFT); - /* for out of order entries in SRAT */ sort_node_map(); if (!nodes_cover_memory(numa_nodes)) { -- cgit v1.2.3-18-g5258 From 43a662f04f731c331706456c9852ef7146ba5d85 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 16 Feb 2011 17:11:08 +0100 Subject: x86-64, NUMA: Unify use of memblk in all init methods Make both amd and dummy use numa_add_memblk() to describe the detected memory blocks. This allows initmem_init() to call numa_register_memblk() regardless of init method in use. Drop custom memory registration codes from amd and dummy. After this change, memblk merge/cleanup in numa_register_memblks() is applied to all init methods. As this makes compute_hash_shift() and numa_register_memblks() used only inside numa_64.c, make them static. Signed-off-by: Tejun Heo Cc: Yinghai Lu Cc: Brian Gerst Cc: Cyrill Gorcunov Cc: Shaohui Zheng Cc: David Rientjes Cc: Ingo Molnar Cc: H. Peter Anvin --- arch/x86/include/asm/numa_64.h | 4 ---- arch/x86/mm/amdtopology_64.c | 13 +------------ arch/x86/mm/numa_64.c | 15 +++++++-------- arch/x86/mm/srat_64.c | 5 ----- 4 files changed, 8 insertions(+), 29 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/numa_64.h b/arch/x86/include/asm/numa_64.h index 3306a2b99ec..e925605150a 100644 --- a/arch/x86/include/asm/numa_64.h +++ b/arch/x86/include/asm/numa_64.h @@ -8,9 +8,6 @@ struct bootnode { u64 end; }; -extern int compute_hash_shift(struct bootnode *nodes, int numblks, - int *nodeids); - #define ZONE_ALIGN (1UL << (MAX_ORDER+PAGE_SHIFT)) extern int numa_off; @@ -33,7 +30,6 @@ extern struct bootnode numa_nodes[MAX_NUMNODES] __initdata; extern int __cpuinit numa_cpu_node(int cpu); extern int __init numa_add_memblk(int nodeid, u64 start, u64 end); -extern int __init numa_register_memblks(void); #ifdef CONFIG_NUMA_EMU #define FAKE_NODE_MIN_SIZE ((u64)32 << 20) diff --git a/arch/x86/mm/amdtopology_64.c b/arch/x86/mm/amdtopology_64.c index cf29527885f..d6d7aa4b98c 100644 --- a/arch/x86/mm/amdtopology_64.c +++ b/arch/x86/mm/amdtopology_64.c @@ -167,6 +167,7 @@ int __init amd_numa_init(void) numa_nodes[nodeid].start = base; numa_nodes[nodeid].end = limit; + numa_add_memblk(nodeid, base, limit); prevbase = base; @@ -263,18 +264,6 @@ int __init amd_scan_nodes(void) { int i; - memnode_shift = compute_hash_shift(numa_nodes, 8, NULL); - if (memnode_shift < 0) { - pr_err("No NUMA node hash function found. Contact maintainer\n"); - return -1; - } - pr_info("Using node hash shift of %d\n", memnode_shift); - - /* use the coreid bits from early_identify_cpu */ - for_each_node_mask(i, node_possible_map) - memblock_x86_register_active_regions(i, - numa_nodes[i].start >> PAGE_SHIFT, - numa_nodes[i].end >> PAGE_SHIFT); init_memory_mapping_high(); for_each_node_mask(i, node_possible_map) setup_node_bootmem(i, numa_nodes[i].start, numa_nodes[i].end); diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index a1d702d2584..552080e8472 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -131,8 +131,8 @@ static int __init extract_lsb_from_nodes(const struct bootnode *nodes, return i; } -int __init compute_hash_shift(struct bootnode *nodes, int numnodes, - int *nodeids) +static int __init compute_hash_shift(struct bootnode *nodes, int numnodes, + int *nodeids) { int shift; @@ -287,7 +287,7 @@ setup_node_bootmem(int nodeid, unsigned long start, unsigned long end) node_set_online(nodeid); } -int __init numa_register_memblks(void) +static int __init numa_register_memblks(void) { int i; @@ -713,17 +713,13 @@ static int dummy_numa_init(void) node_set(0, cpu_nodes_parsed); node_set(0, mem_nodes_parsed); + numa_add_memblk(0, 0, (u64)max_pfn << PAGE_SHIFT); return 0; } static int dummy_scan_nodes(void) { - /* setup dummy node covering all memory */ - memnode_shift = 63; - memnodemap = memnode.embedded_map; - memnodemap[0] = 0; - memblock_x86_register_active_regions(0, 0, max_pfn); init_memory_mapping_high(); setup_node_bootmem(0, 0, max_pfn << PAGE_SHIFT); numa_init_array(); @@ -784,6 +780,9 @@ void __init initmem_init(void) if (WARN_ON(nodes_empty(node_possible_map))) continue; + if (numa_register_memblks() < 0) + continue; + if (!scan_nodes[i]()) return; } diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index 341b37193c7..69f147116da 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -308,11 +308,6 @@ int __init acpi_scan_nodes(void) if (acpi_numa <= 0) return -1; - if (numa_register_memblks() < 0) { - bad_srat(); - return -1; - } - /* for out of order entries in SRAT */ sort_node_map(); if (!nodes_cover_memory(numa_nodes)) { -- cgit v1.2.3-18-g5258 From fd0435d8fb1d4e5771f9ae3af71f2a77c1f4bd09 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 16 Feb 2011 17:11:08 +0100 Subject: x86-64, NUMA: Unify the rest of memblk registration Move the remaining memblk registration logic from acpi_scan_nodes() to numa_register_memblks() and initmem_init(). This applies nodes_cover_memory() sanity check, memory node sorting and node_online() checking, which were only applied to acpi, to all init methods. As all memblk registration is moved to common code, active range clearing is moved to initmem_init() too and removed from bad_srat(). Signed-off-by: Tejun Heo Cc: Yinghai Lu Cc: Brian Gerst Cc: Cyrill Gorcunov Cc: Shaohui Zheng Cc: David Rientjes Cc: Ingo Molnar Cc: H. Peter Anvin --- arch/x86/mm/amdtopology_64.c | 7 ----- arch/x86/mm/numa_64.c | 74 ++++++++++++++++++++++++++++++++++++++++---- arch/x86/mm/srat_64.c | 61 ------------------------------------ 3 files changed, 68 insertions(+), 74 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/amdtopology_64.c b/arch/x86/mm/amdtopology_64.c index d6d7aa4b98c..9c9f46adf41 100644 --- a/arch/x86/mm/amdtopology_64.c +++ b/arch/x86/mm/amdtopology_64.c @@ -262,12 +262,5 @@ void __init amd_fake_nodes(const struct bootnode *nodes, int nr_nodes) int __init amd_scan_nodes(void) { - int i; - - init_memory_mapping_high(); - for_each_node_mask(i, node_possible_map) - setup_node_bootmem(i, numa_nodes[i].start, numa_nodes[i].end); - - numa_init_array(); return 0; } diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index 552080e8472..748c6b5bff6 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -287,6 +287,37 @@ setup_node_bootmem(int nodeid, unsigned long start, unsigned long end) node_set_online(nodeid); } +/* + * Sanity check to catch more bad NUMA configurations (they are amazingly + * common). Make sure the nodes cover all memory. + */ +static int __init nodes_cover_memory(const struct bootnode *nodes) +{ + unsigned long numaram, e820ram; + int i; + + numaram = 0; + for_each_node_mask(i, mem_nodes_parsed) { + unsigned long s = nodes[i].start >> PAGE_SHIFT; + unsigned long e = nodes[i].end >> PAGE_SHIFT; + numaram += e - s; + numaram -= __absent_pages_in_range(i, s, e); + if ((long)numaram < 0) + numaram = 0; + } + + e820ram = max_pfn - + (memblock_x86_hole_size(0, max_pfn<> PAGE_SHIFT); + /* We seem to lose 3 pages somewhere. Allow 1M of slack. */ + if ((long)(e820ram - numaram) >= (1<<(20 - PAGE_SHIFT))) { + printk(KERN_ERR "NUMA: nodes only cover %luMB of your %luMB e820 RAM. Not used.\n", + (numaram << PAGE_SHIFT) >> 20, + (e820ram << PAGE_SHIFT) >> 20); + return 0; + } + return 1; +} + static int __init numa_register_memblks(void) { int i; @@ -349,6 +380,27 @@ static int __init numa_register_memblks(void) memblock_x86_register_active_regions(memblk_nodeid[i], node_memblk_range[i].start >> PAGE_SHIFT, node_memblk_range[i].end >> PAGE_SHIFT); + + /* for out of order entries */ + sort_node_map(); + if (!nodes_cover_memory(numa_nodes)) + return -EINVAL; + + init_memory_mapping_high(); + + /* Finally register nodes. */ + for_each_node_mask(i, node_possible_map) + setup_node_bootmem(i, numa_nodes[i].start, numa_nodes[i].end); + + /* + * Try again in case setup_node_bootmem missed one due to missing + * bootmem. + */ + for_each_node_mask(i, node_possible_map) + if (!node_online(i)) + setup_node_bootmem(i, numa_nodes[i].start, + numa_nodes[i].end); + return 0; } @@ -714,16 +766,14 @@ static int dummy_numa_init(void) node_set(0, cpu_nodes_parsed); node_set(0, mem_nodes_parsed); numa_add_memblk(0, 0, (u64)max_pfn << PAGE_SHIFT); + numa_nodes[0].start = 0; + numa_nodes[0].end = (u64)max_pfn << PAGE_SHIFT; return 0; } static int dummy_scan_nodes(void) { - init_memory_mapping_high(); - setup_node_bootmem(0, 0, max_pfn << PAGE_SHIFT); - numa_init_array(); - return 0; } @@ -759,6 +809,7 @@ void __init initmem_init(void) memset(node_memblk_range, 0, sizeof(node_memblk_range)); memset(memblk_nodeid, 0, sizeof(memblk_nodeid)); memset(numa_nodes, 0, sizeof(numa_nodes)); + remove_all_active_ranges(); if (numa_init[i]() < 0) continue; @@ -783,8 +834,19 @@ void __init initmem_init(void) if (numa_register_memblks() < 0) continue; - if (!scan_nodes[i]()) - return; + if (scan_nodes[i]() < 0) + continue; + + for (j = 0; j < nr_cpu_ids; j++) { + int nid = early_cpu_to_node(j); + + if (nid == NUMA_NO_NODE) + continue; + if (!node_online(nid)) + numa_clear_node(j); + } + numa_init_array(); + return; } BUG(); } diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index 69f147116da..4a2c33b0a48 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -44,7 +44,6 @@ static __init void bad_srat(void) numa_nodes[i].start = numa_nodes[i].end = 0; nodes_add[i].start = nodes_add[i].end = 0; } - remove_all_active_ranges(); } static __init inline int srat_disabled(void) @@ -259,35 +258,6 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) update_nodes_add(node, start, end); } -/* Sanity check to catch more bad SRATs (they are amazingly common). - Make sure the PXMs cover all memory. */ -static int __init nodes_cover_memory(const struct bootnode *nodes) -{ - int i; - unsigned long pxmram, e820ram; - - pxmram = 0; - for_each_node_mask(i, mem_nodes_parsed) { - unsigned long s = nodes[i].start >> PAGE_SHIFT; - unsigned long e = nodes[i].end >> PAGE_SHIFT; - pxmram += e - s; - pxmram -= __absent_pages_in_range(i, s, e); - if ((long)pxmram < 0) - pxmram = 0; - } - - e820ram = max_pfn - (memblock_x86_hole_size(0, max_pfn<>PAGE_SHIFT); - /* We seem to lose 3 pages somewhere. Allow 1M of slack. */ - if ((long)(e820ram - pxmram) >= (1<<(20 - PAGE_SHIFT))) { - printk(KERN_ERR - "SRAT: PXMs only cover %luMB of your %luMB e820 RAM. Not used.\n", - (pxmram << PAGE_SHIFT) >> 20, - (e820ram << PAGE_SHIFT) >> 20); - return 0; - } - return 1; -} - void __init acpi_numa_arch_fixup(void) {} int __init x86_acpi_numa_init(void) @@ -303,39 +273,8 @@ int __init x86_acpi_numa_init(void) /* Use the information discovered above to actually set up the nodes. */ int __init acpi_scan_nodes(void) { - int i; - if (acpi_numa <= 0) return -1; - - /* for out of order entries in SRAT */ - sort_node_map(); - if (!nodes_cover_memory(numa_nodes)) { - bad_srat(); - return -1; - } - - init_memory_mapping_high(); - - /* Finally register nodes */ - for_each_node_mask(i, node_possible_map) - setup_node_bootmem(i, numa_nodes[i].start, numa_nodes[i].end); - /* Try again in case setup_node_bootmem missed one due - to missing bootmem */ - for_each_node_mask(i, node_possible_map) - if (!node_online(i)) - setup_node_bootmem(i, numa_nodes[i].start, - numa_nodes[i].end); - - for (i = 0; i < nr_cpu_ids; i++) { - int node = early_cpu_to_node(i); - - if (node == NUMA_NO_NODE) - continue; - if (!node_online(node)) - numa_clear_node(i); - } - numa_init_array(); return 0; } -- cgit v1.2.3-18-g5258 From 5d371b08fea80c4fb7450d31e5a4e35b438ef850 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 16 Feb 2011 17:11:08 +0100 Subject: x86-64, NUMA: Kill {acpi|amd|dummy}_scan_nodes() They are empty now. Kill them. Signed-off-by: Tejun Heo Cc: Yinghai Lu Cc: Brian Gerst Cc: Cyrill Gorcunov Cc: Shaohui Zheng Cc: David Rientjes Cc: Ingo Molnar Cc: H. Peter Anvin --- arch/x86/include/asm/acpi.h | 1 - arch/x86/include/asm/amd_nb.h | 1 - arch/x86/mm/amdtopology_64.c | 5 ----- arch/x86/mm/numa_64.c | 11 ----------- arch/x86/mm/srat_64.c | 8 -------- 5 files changed, 26 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h index 12bd1fdd206..cfa3d5c3144 100644 --- a/arch/x86/include/asm/acpi.h +++ b/arch/x86/include/asm/acpi.h @@ -186,7 +186,6 @@ struct bootnode; #ifdef CONFIG_ACPI_NUMA extern int acpi_numa; extern int x86_acpi_numa_init(void); -extern int acpi_scan_nodes(void); #ifdef CONFIG_NUMA_EMU extern void acpi_fake_nodes(const struct bootnode *fake_nodes, diff --git a/arch/x86/include/asm/amd_nb.h b/arch/x86/include/asm/amd_nb.h index 246cdc6ca9b..384d1188e78 100644 --- a/arch/x86/include/asm/amd_nb.h +++ b/arch/x86/include/asm/amd_nb.h @@ -17,7 +17,6 @@ extern int early_is_amd_nb(u32 value); extern int amd_cache_northbridges(void); extern void amd_flush_garts(void); extern int amd_numa_init(void); -extern int amd_scan_nodes(void); extern int amd_get_subcaches(int); extern int amd_set_subcaches(int, int); diff --git a/arch/x86/mm/amdtopology_64.c b/arch/x86/mm/amdtopology_64.c index 9c9f46adf41..90cf297b3b5 100644 --- a/arch/x86/mm/amdtopology_64.c +++ b/arch/x86/mm/amdtopology_64.c @@ -259,8 +259,3 @@ void __init amd_fake_nodes(const struct bootnode *nodes, int nr_nodes) memcpy(__apicid_to_node, fake_apicid_to_node, sizeof(__apicid_to_node)); } #endif /* CONFIG_NUMA_EMU */ - -int __init amd_scan_nodes(void) -{ - return 0; -} diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index 748c6b5bff6..e211c005f5e 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -772,25 +772,17 @@ static int dummy_numa_init(void) return 0; } -static int dummy_scan_nodes(void) -{ - return 0; -} - void __init initmem_init(void) { int (*numa_init[])(void) = { [2] = dummy_numa_init }; - int (*scan_nodes[])(void) = { [2] = dummy_scan_nodes }; int i, j; if (!numa_off) { #ifdef CONFIG_ACPI_NUMA numa_init[0] = x86_acpi_numa_init; - scan_nodes[0] = acpi_scan_nodes; #endif #ifdef CONFIG_AMD_NUMA numa_init[1] = amd_numa_init; - scan_nodes[1] = amd_scan_nodes; #endif } @@ -834,9 +826,6 @@ void __init initmem_init(void) if (numa_register_memblks() < 0) continue; - if (scan_nodes[i]() < 0) - continue; - for (j = 0; j < nr_cpu_ids; j++) { int nid = early_cpu_to_node(j); diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index 4a2c33b0a48..d56eff811cd 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -270,14 +270,6 @@ int __init x86_acpi_numa_init(void) return srat_disabled() ? -EINVAL : 0; } -/* Use the information discovered above to actually set up the nodes. */ -int __init acpi_scan_nodes(void) -{ - if (acpi_numa <= 0) - return -1; - return 0; -} - #ifdef CONFIG_NUMA_EMU static int fake_node_to_pxm_map[MAX_NUMNODES] __initdata = { [0 ... MAX_NUMNODES-1] = PXM_INVAL -- cgit v1.2.3-18-g5258 From 8968dab8ad90ea16ef92f2406868354ea3ab6bb9 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 16 Feb 2011 17:11:08 +0100 Subject: x86-64, NUMA: Remove %NULL @nodeids handling from compute_hash_shift() numa_emulation() called compute_hash_shift() with %NULL @nodeids which meant identity mapping between index and nodeid. Make numa_emulation() build identity array and drop %NULL @nodeids handling from populate_memnodemap() and thus from compute_hash_shift(). This is to prepare for transition to using memblks instead. Signed-off-by: Tejun Heo Cc: Yinghai Lu Cc: Brian Gerst Cc: Cyrill Gorcunov Cc: Shaohui Zheng Cc: David Rientjes Cc: Ingo Molnar Cc: H. Peter Anvin --- arch/x86/mm/numa_64.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index e211c005f5e..243d18d4cfd 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -63,12 +63,7 @@ static int __init populate_memnodemap(const struct bootnode *nodes, do { if (memnodemap[addr >> shift] != NUMA_NO_NODE) return -1; - - if (!nodeids) - memnodemap[addr >> shift] = i; - else - memnodemap[addr >> shift] = nodeids[i]; - + memnodemap[addr >> shift] = nodeids[i]; addr += (1UL << shift); } while (addr < end); res = 1; @@ -706,6 +701,7 @@ static int __init split_nodes_size_interleave(u64 addr, u64 max_addr, u64 size) static int __init numa_emulation(unsigned long start_pfn, unsigned long last_pfn, int acpi, int amd) { + static int nodeid[NR_NODE_MEMBLKS] __initdata; u64 addr = start_pfn << PAGE_SHIFT; u64 max_addr = last_pfn << PAGE_SHIFT; int num_nodes; @@ -730,7 +726,11 @@ static int __init numa_emulation(unsigned long start_pfn, if (num_nodes < 0) return num_nodes; - memnode_shift = compute_hash_shift(nodes, num_nodes, NULL); + + for (i = 0; i < ARRAY_SIZE(nodeid); i++) + nodeid[i] = i; + + memnode_shift = compute_hash_shift(nodes, num_nodes, nodeid); if (memnode_shift < 0) { memnode_shift = 0; printk(KERN_ERR "No NUMA hash function found. NUMA emulation " -- cgit v1.2.3-18-g5258 From 97e7b78d0674882a0aae043fda428c583dbb225d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 16 Feb 2011 17:11:08 +0100 Subject: x86-64, NUMA: Introduce struct numa_meminfo Arrays for memblks and nodeids and their length lived in separate variables making things unnecessarily cumbersome. Introduce struct numa_meminfo which contains all memory configuration info. This patch doesn't cause any behavior change. Signed-off-by: Tejun Heo Cc: Yinghai Lu Cc: Brian Gerst Cc: Cyrill Gorcunov Cc: Shaohui Zheng Cc: David Rientjes Cc: Ingo Molnar Cc: H. Peter Anvin --- arch/x86/mm/numa_64.c | 145 ++++++++++++++++++++++++++------------------------ 1 file changed, 75 insertions(+), 70 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index 243d18d4cfd..c3496e2b5a7 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -22,6 +22,17 @@ #include #include +struct numa_memblk { + u64 start; + u64 end; + int nid; +}; + +struct numa_meminfo { + int nr_blks; + struct numa_memblk blk[NR_NODE_MEMBLKS]; +}; + struct pglist_data *node_data[MAX_NUMNODES] __read_mostly; EXPORT_SYMBOL(node_data); @@ -33,9 +44,7 @@ struct memnode memnode; static unsigned long __initdata nodemap_addr; static unsigned long __initdata nodemap_size; -static int num_node_memblks __initdata; -static struct bootnode node_memblk_range[NR_NODE_MEMBLKS] __initdata; -static int memblk_nodeid[NR_NODE_MEMBLKS] __initdata; +static struct numa_meminfo numa_meminfo __initdata; struct bootnode numa_nodes[MAX_NUMNODES] __initdata; @@ -46,16 +55,15 @@ struct bootnode numa_nodes[MAX_NUMNODES] __initdata; * 0 if memnodmap[] too small (of shift too small) * -1 if node overlap or lost ram (shift too big) */ -static int __init populate_memnodemap(const struct bootnode *nodes, - int numnodes, int shift, int *nodeids) +static int __init populate_memnodemap(const struct numa_meminfo *mi, int shift) { unsigned long addr, end; int i, res = -1; memset(memnodemap, 0xff, sizeof(s16)*memnodemapsize); - for (i = 0; i < numnodes; i++) { - addr = nodes[i].start; - end = nodes[i].end; + for (i = 0; i < mi->nr_blks; i++) { + addr = mi->blk[i].start; + end = mi->blk[i].end; if (addr >= end) continue; if ((end >> shift) >= memnodemapsize) @@ -63,7 +71,7 @@ static int __init populate_memnodemap(const struct bootnode *nodes, do { if (memnodemap[addr >> shift] != NUMA_NO_NODE) return -1; - memnodemap[addr >> shift] = nodeids[i]; + memnodemap[addr >> shift] = mi->blk[i].nid; addr += (1UL << shift); } while (addr < end); res = 1; @@ -101,16 +109,15 @@ static int __init allocate_cachealigned_memnodemap(void) * The LSB of all start and end addresses in the node map is the value of the * maximum possible shift. */ -static int __init extract_lsb_from_nodes(const struct bootnode *nodes, - int numnodes) +static int __init extract_lsb_from_nodes(const struct numa_meminfo *mi) { int i, nodes_used = 0; unsigned long start, end; unsigned long bitfield = 0, memtop = 0; - for (i = 0; i < numnodes; i++) { - start = nodes[i].start; - end = nodes[i].end; + for (i = 0; i < mi->nr_blks; i++) { + start = mi->blk[i].start; + end = mi->blk[i].end; if (start >= end) continue; bitfield |= start; @@ -126,18 +133,17 @@ static int __init extract_lsb_from_nodes(const struct bootnode *nodes, return i; } -static int __init compute_hash_shift(struct bootnode *nodes, int numnodes, - int *nodeids) +static int __init compute_hash_shift(const struct numa_meminfo *mi) { int shift; - shift = extract_lsb_from_nodes(nodes, numnodes); + shift = extract_lsb_from_nodes(mi); if (allocate_cachealigned_memnodemap()) return -1; printk(KERN_DEBUG "NUMA: Using %d for the hash shift.\n", shift); - if (populate_memnodemap(nodes, numnodes, shift, nodeids) != 1) { + if (populate_memnodemap(mi, shift) != 1) { printk(KERN_INFO "Your memory is not aligned you need to " "rebuild your kernel with a bigger NODEMAPSIZE " "shift=%d\n", shift); @@ -185,21 +191,25 @@ static void * __init early_node_mem(int nodeid, unsigned long start, static __init int conflicting_memblks(unsigned long start, unsigned long end) { + struct numa_meminfo *mi = &numa_meminfo; int i; - for (i = 0; i < num_node_memblks; i++) { - struct bootnode *nd = &node_memblk_range[i]; - if (nd->start == nd->end) + + for (i = 0; i < mi->nr_blks; i++) { + struct numa_memblk *blk = &mi->blk[i]; + + if (blk->start == blk->end) continue; - if (nd->end > start && nd->start < end) - return memblk_nodeid[i]; - if (nd->end == end && nd->start == start) - return memblk_nodeid[i]; + if (blk->end > start && blk->start < end) + return blk->nid; + if (blk->end == end && blk->start == start) + return blk->nid; } return -1; } int __init numa_add_memblk(int nid, u64 start, u64 end) { + struct numa_meminfo *mi = &numa_meminfo; int i; i = conflicting_memblks(start, end); @@ -213,10 +223,10 @@ int __init numa_add_memblk(int nid, u64 start, u64 end) return -EINVAL; } - node_memblk_range[num_node_memblks].start = start; - node_memblk_range[num_node_memblks].end = end; - memblk_nodeid[num_node_memblks] = nid; - num_node_memblks++; + mi->blk[mi->nr_blks].start = start; + mi->blk[mi->nr_blks].end = end; + mi->blk[mi->nr_blks].nid = nid; + mi->nr_blks++; return 0; } @@ -315,66 +325,59 @@ static int __init nodes_cover_memory(const struct bootnode *nodes) static int __init numa_register_memblks(void) { + struct numa_meminfo *mi = &numa_meminfo; int i; /* * Join together blocks on the same node, holes between * which don't overlap with memory on other nodes. */ - for (i = 0; i < num_node_memblks; ++i) { + for (i = 0; i < mi->nr_blks; ++i) { + struct numa_memblk *bi = &mi->blk[i]; int j, k; - for (j = i + 1; j < num_node_memblks; ++j) { + for (j = i + 1; j < mi->nr_blks; ++j) { + struct numa_memblk *bj = &mi->blk[j]; unsigned long start, end; - if (memblk_nodeid[i] != memblk_nodeid[j]) + if (bi->nid != bj->nid) continue; - start = min(node_memblk_range[i].end, - node_memblk_range[j].end); - end = max(node_memblk_range[i].start, - node_memblk_range[j].start); - for (k = 0; k < num_node_memblks; ++k) { - if (memblk_nodeid[i] == memblk_nodeid[k]) + start = min(bi->end, bj->end); + end = max(bi->start, bj->start); + for (k = 0; k < mi->nr_blks; ++k) { + struct numa_memblk *bk = &mi->blk[k]; + + if (bi->nid == bk->nid) continue; - if (start < node_memblk_range[k].end && - end > node_memblk_range[k].start) + if (start < bk->end && end > bk->start) break; } - if (k < num_node_memblks) + if (k < mi->nr_blks) continue; - start = min(node_memblk_range[i].start, - node_memblk_range[j].start); - end = max(node_memblk_range[i].end, - node_memblk_range[j].end); + start = min(bi->start, bj->start); + end = max(bi->end, bj->end); printk(KERN_INFO "NUMA: Node %d [%Lx,%Lx) + [%Lx,%Lx) -> [%lx,%lx)\n", - memblk_nodeid[i], - node_memblk_range[i].start, - node_memblk_range[i].end, - node_memblk_range[j].start, - node_memblk_range[j].end, + bi->nid, bi->start, bi->end, bj->start, bj->end, start, end); - node_memblk_range[i].start = start; - node_memblk_range[i].end = end; - k = --num_node_memblks - j; - memmove(memblk_nodeid + j, memblk_nodeid + j+1, - k * sizeof(*memblk_nodeid)); - memmove(node_memblk_range + j, node_memblk_range + j+1, - k * sizeof(*node_memblk_range)); + bi->start = start; + bi->end = end; + k = --mi->nr_blks - j; + memmove(mi->blk + j, mi->blk + j + 1, + k * sizeof(mi->blk[0])); --j; } } - memnode_shift = compute_hash_shift(node_memblk_range, num_node_memblks, - memblk_nodeid); + memnode_shift = compute_hash_shift(mi); if (memnode_shift < 0) { printk(KERN_ERR "NUMA: No NUMA node hash function found. Contact maintainer\n"); return -EINVAL; } - for (i = 0; i < num_node_memblks; i++) - memblock_x86_register_active_regions(memblk_nodeid[i], - node_memblk_range[i].start >> PAGE_SHIFT, - node_memblk_range[i].end >> PAGE_SHIFT); + for (i = 0; i < mi->nr_blks; i++) + memblock_x86_register_active_regions(mi->blk[i].nid, + mi->blk[i].start >> PAGE_SHIFT, + mi->blk[i].end >> PAGE_SHIFT); /* for out of order entries */ sort_node_map(); @@ -701,7 +704,7 @@ static int __init split_nodes_size_interleave(u64 addr, u64 max_addr, u64 size) static int __init numa_emulation(unsigned long start_pfn, unsigned long last_pfn, int acpi, int amd) { - static int nodeid[NR_NODE_MEMBLKS] __initdata; + static struct numa_meminfo ei __initdata; u64 addr = start_pfn << PAGE_SHIFT; u64 max_addr = last_pfn << PAGE_SHIFT; int num_nodes; @@ -727,10 +730,14 @@ static int __init numa_emulation(unsigned long start_pfn, if (num_nodes < 0) return num_nodes; - for (i = 0; i < ARRAY_SIZE(nodeid); i++) - nodeid[i] = i; + ei.nr_blks = num_nodes; + for (i = 0; i < ei.nr_blks; i++) { + ei.blk[i].start = nodes[i].start; + ei.blk[i].end = nodes[i].end; + ei.blk[i].nid = i; + } - memnode_shift = compute_hash_shift(nodes, num_nodes, nodeid); + memnode_shift = compute_hash_shift(&ei); if (memnode_shift < 0) { memnode_shift = 0; printk(KERN_ERR "No NUMA hash function found. NUMA emulation " @@ -797,9 +804,7 @@ void __init initmem_init(void) nodes_clear(mem_nodes_parsed); nodes_clear(node_possible_map); nodes_clear(node_online_map); - num_node_memblks = 0; - memset(node_memblk_range, 0, sizeof(node_memblk_range)); - memset(memblk_nodeid, 0, sizeof(memblk_nodeid)); + memset(&numa_meminfo, 0, sizeof(numa_meminfo)); memset(numa_nodes, 0, sizeof(numa_nodes)); remove_all_active_ranges(); -- cgit v1.2.3-18-g5258 From f9c60251c3d08777db6758cafd959a55a838abd6 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 16 Feb 2011 17:11:09 +0100 Subject: x86-64, NUMA: Separate out numa_cleanup_meminfo() Separate out numa_cleanup_meminfo() from numa_register_memblks(). node_possible_map initialization is moved to the top of the split numa_register_memblks(). This patch doesn't cause behavior change. Signed-off-by: Tejun Heo Cc: Yinghai Lu Cc: Brian Gerst Cc: Cyrill Gorcunov Cc: Shaohui Zheng Cc: David Rientjes Cc: Ingo Molnar Cc: H. Peter Anvin --- arch/x86/mm/numa_64.c | 83 ++++++++++++++++++++++++++++----------------------- 1 file changed, 46 insertions(+), 37 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index c3496e2b5a7..f2721de30a4 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -292,40 +292,8 @@ setup_node_bootmem(int nodeid, unsigned long start, unsigned long end) node_set_online(nodeid); } -/* - * Sanity check to catch more bad NUMA configurations (they are amazingly - * common). Make sure the nodes cover all memory. - */ -static int __init nodes_cover_memory(const struct bootnode *nodes) +static int __init numa_cleanup_meminfo(struct numa_meminfo *mi) { - unsigned long numaram, e820ram; - int i; - - numaram = 0; - for_each_node_mask(i, mem_nodes_parsed) { - unsigned long s = nodes[i].start >> PAGE_SHIFT; - unsigned long e = nodes[i].end >> PAGE_SHIFT; - numaram += e - s; - numaram -= __absent_pages_in_range(i, s, e); - if ((long)numaram < 0) - numaram = 0; - } - - e820ram = max_pfn - - (memblock_x86_hole_size(0, max_pfn<> PAGE_SHIFT); - /* We seem to lose 3 pages somewhere. Allow 1M of slack. */ - if ((long)(e820ram - numaram) >= (1<<(20 - PAGE_SHIFT))) { - printk(KERN_ERR "NUMA: nodes only cover %luMB of your %luMB e820 RAM. Not used.\n", - (numaram << PAGE_SHIFT) >> 20, - (e820ram << PAGE_SHIFT) >> 20); - return 0; - } - return 1; -} - -static int __init numa_register_memblks(void) -{ - struct numa_meminfo *mi = &numa_meminfo; int i; /* @@ -368,6 +336,49 @@ static int __init numa_register_memblks(void) } } + return 0; +} + +/* + * Sanity check to catch more bad NUMA configurations (they are amazingly + * common). Make sure the nodes cover all memory. + */ +static int __init nodes_cover_memory(const struct bootnode *nodes) +{ + unsigned long numaram, e820ram; + int i; + + numaram = 0; + for_each_node_mask(i, mem_nodes_parsed) { + unsigned long s = nodes[i].start >> PAGE_SHIFT; + unsigned long e = nodes[i].end >> PAGE_SHIFT; + numaram += e - s; + numaram -= __absent_pages_in_range(i, s, e); + if ((long)numaram < 0) + numaram = 0; + } + + e820ram = max_pfn - (memblock_x86_hole_size(0, + max_pfn << PAGE_SHIFT) >> PAGE_SHIFT); + /* We seem to lose 3 pages somewhere. Allow 1M of slack. */ + if ((long)(e820ram - numaram) >= (1 << (20 - PAGE_SHIFT))) { + printk(KERN_ERR "NUMA: nodes only cover %luMB of your %luMB e820 RAM. Not used.\n", + (numaram << PAGE_SHIFT) >> 20, + (e820ram << PAGE_SHIFT) >> 20); + return 0; + } + return 1; +} + +static int __init numa_register_memblks(struct numa_meminfo *mi) +{ + int i; + + /* Account for nodes with cpus and no memory */ + nodes_or(node_possible_map, mem_nodes_parsed, cpu_nodes_parsed); + if (WARN_ON(nodes_empty(node_possible_map))) + return -EINVAL; + memnode_shift = compute_hash_shift(mi); if (memnode_shift < 0) { printk(KERN_ERR "NUMA: No NUMA node hash function found. Contact maintainer\n"); @@ -823,12 +834,10 @@ void __init initmem_init(void) nodes_clear(node_possible_map); nodes_clear(node_online_map); #endif - /* Account for nodes with cpus and no memory */ - nodes_or(node_possible_map, mem_nodes_parsed, cpu_nodes_parsed); - if (WARN_ON(nodes_empty(node_possible_map))) + if (numa_cleanup_meminfo(&numa_meminfo) < 0) continue; - if (numa_register_memblks() < 0) + if (numa_register_memblks(&numa_meminfo) < 0) continue; for (j = 0; j < nr_cpu_ids; j++) { -- cgit v1.2.3-18-g5258 From 2e756be44714d0ec2f9827e4f4797c60876167a1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 16 Feb 2011 17:11:09 +0100 Subject: x86-64, NUMA: make numa_cleanup_meminfo() prettier * Factor out numa_remove_memblk_from(). * Hole detection doesn't need separate start/end. Calculate start/end once. * Relocate comment. * Define iterators at the top and remove unnecessary prefix increments. This prepares for further improvements to the function. Signed-off-by: Tejun Heo Cc: Yinghai Lu Cc: Brian Gerst Cc: Cyrill Gorcunov Cc: Shaohui Zheng Cc: David Rientjes Cc: Ingo Molnar Cc: H. Peter Anvin --- arch/x86/mm/numa_64.c | 36 +++++++++++++++++++----------------- 1 file changed, 19 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index f2721de30a4..4fd3368adc8 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -230,6 +230,13 @@ int __init numa_add_memblk(int nid, u64 start, u64 end) return 0; } +static void __init numa_remove_memblk_from(int idx, struct numa_meminfo *mi) +{ + mi->nr_blks--; + memmove(&mi->blk[idx], &mi->blk[idx + 1], + (mi->nr_blks - idx) * sizeof(mi->blk[0])); +} + static __init void cutoff_node(int i, unsigned long start, unsigned long end) { struct bootnode *nd = &numa_nodes[i]; @@ -294,25 +301,25 @@ setup_node_bootmem(int nodeid, unsigned long start, unsigned long end) static int __init numa_cleanup_meminfo(struct numa_meminfo *mi) { - int i; + int i, j, k; - /* - * Join together blocks on the same node, holes between - * which don't overlap with memory on other nodes. - */ - for (i = 0; i < mi->nr_blks; ++i) { + for (i = 0; i < mi->nr_blks; i++) { struct numa_memblk *bi = &mi->blk[i]; - int j, k; - for (j = i + 1; j < mi->nr_blks; ++j) { + for (j = i + 1; j < mi->nr_blks; j++) { struct numa_memblk *bj = &mi->blk[j]; unsigned long start, end; + /* + * Join together blocks on the same node, holes + * between which don't overlap with memory on other + * nodes. + */ if (bi->nid != bj->nid) continue; - start = min(bi->end, bj->end); - end = max(bi->start, bj->start); - for (k = 0; k < mi->nr_blks; ++k) { + start = min(bi->start, bj->start); + end = max(bi->end, bj->end); + for (k = 0; k < mi->nr_blks; k++) { struct numa_memblk *bk = &mi->blk[k]; if (bi->nid == bk->nid) @@ -322,17 +329,12 @@ static int __init numa_cleanup_meminfo(struct numa_meminfo *mi) } if (k < mi->nr_blks) continue; - start = min(bi->start, bj->start); - end = max(bi->end, bj->end); printk(KERN_INFO "NUMA: Node %d [%Lx,%Lx) + [%Lx,%Lx) -> [%lx,%lx)\n", bi->nid, bi->start, bi->end, bj->start, bj->end, start, end); bi->start = start; bi->end = end; - k = --mi->nr_blks - j; - memmove(mi->blk + j, mi->blk + j + 1, - k * sizeof(mi->blk[0])); - --j; + numa_remove_memblk_from(j--, mi); } } -- cgit v1.2.3-18-g5258 From 56e827fbde9a3cb886a2fe138db0d99e98efbfb1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 16 Feb 2011 17:11:09 +0100 Subject: x86-64, NUMA: consolidate and improve memblk sanity checks memblk sanity check was scattered around and incomplete. Consolidate and improve. * Confliction detection and cutoff_node() logic are moved to numa_cleanup_meminfo(). * numa_cleanup_meminfo() clears the unused memblks before returning. * Check and warn about invalid input parameters in numa_add_memblk(). * Check the maximum number of memblk isn't exceeded in numa_add_memblk(). * numa_cleanup_meminfo() is now called before numa_emulation() so that the emulation code also uses the cleaned up version. Signed-off-by: Tejun Heo Cc: Yinghai Lu Cc: Brian Gerst Cc: Cyrill Gorcunov Cc: Shaohui Zheng Cc: David Rientjes Cc: Ingo Molnar Cc: H. Peter Anvin --- arch/x86/mm/numa_64.c | 99 +++++++++++++++++++++++++-------------------------- 1 file changed, 49 insertions(+), 50 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index 4fd3368adc8..20aa1d31e16 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -189,37 +189,23 @@ static void * __init early_node_mem(int nodeid, unsigned long start, return NULL; } -static __init int conflicting_memblks(unsigned long start, unsigned long end) +int __init numa_add_memblk(int nid, u64 start, u64 end) { struct numa_meminfo *mi = &numa_meminfo; - int i; - for (i = 0; i < mi->nr_blks; i++) { - struct numa_memblk *blk = &mi->blk[i]; + /* ignore zero length blks */ + if (start == end) + return 0; - if (blk->start == blk->end) - continue; - if (blk->end > start && blk->start < end) - return blk->nid; - if (blk->end == end && blk->start == start) - return blk->nid; + /* whine about and ignore invalid blks */ + if (start > end || nid < 0 || nid >= MAX_NUMNODES) { + pr_warning("NUMA: Warning: invalid memblk node %d (%Lx-%Lx)\n", + nid, start, end); + return 0; } - return -1; -} - -int __init numa_add_memblk(int nid, u64 start, u64 end) -{ - struct numa_meminfo *mi = &numa_meminfo; - int i; - i = conflicting_memblks(start, end); - if (i == nid) { - printk(KERN_WARNING "NUMA: Warning: node %d (%Lx-%Lx) overlaps with itself (%Lx-%Lx)\n", - nid, start, end, numa_nodes[i].start, numa_nodes[i].end); - } else if (i >= 0) { - printk(KERN_ERR "NUMA: node %d (%Lx-%Lx) overlaps with node %d (%Lx-%Lx)\n", - nid, start, end, i, - numa_nodes[i].start, numa_nodes[i].end); + if (mi->nr_blks >= NR_NODE_MEMBLKS) { + pr_err("NUMA: too many memblk ranges\n"); return -EINVAL; } @@ -237,22 +223,6 @@ static void __init numa_remove_memblk_from(int idx, struct numa_meminfo *mi) (mi->nr_blks - idx) * sizeof(mi->blk[0])); } -static __init void cutoff_node(int i, unsigned long start, unsigned long end) -{ - struct bootnode *nd = &numa_nodes[i]; - - if (nd->start < start) { - nd->start = start; - if (nd->end < nd->start) - nd->start = nd->end; - } - if (nd->end > end) { - nd->end = end; - if (nd->start > nd->end) - nd->start = nd->end; - } -} - /* Initialize bootmem allocator for a node */ void __init setup_node_bootmem(int nodeid, unsigned long start, unsigned long end) @@ -301,15 +271,44 @@ setup_node_bootmem(int nodeid, unsigned long start, unsigned long end) static int __init numa_cleanup_meminfo(struct numa_meminfo *mi) { + const u64 low = 0; + const u64 high = (u64)max_pfn << PAGE_SHIFT; int i, j, k; for (i = 0; i < mi->nr_blks; i++) { struct numa_memblk *bi = &mi->blk[i]; + /* make sure all blocks are inside the limits */ + bi->start = max(bi->start, low); + bi->end = min(bi->end, high); + + /* and there's no empty block */ + if (bi->start == bi->end) { + numa_remove_memblk_from(i--, mi); + continue; + } + for (j = i + 1; j < mi->nr_blks; j++) { struct numa_memblk *bj = &mi->blk[j]; unsigned long start, end; + /* + * See whether there are overlapping blocks. Whine + * about but allow overlaps of the same nid. They + * will be merged below. + */ + if (bi->end > bj->start && bi->start < bj->end) { + if (bi->nid != bj->nid) { + pr_err("NUMA: node %d (%Lx-%Lx) overlaps with node %d (%Lx-%Lx)\n", + bi->nid, bi->start, bi->end, + bj->nid, bj->start, bj->end); + return -EINVAL; + } + pr_warning("NUMA: Warning: node %d (%Lx-%Lx) overlaps with itself (%Lx-%Lx)\n", + bi->nid, bi->start, bi->end, + bj->start, bj->end); + } + /* * Join together blocks on the same node, holes * between which don't overlap with memory on other @@ -317,8 +316,8 @@ static int __init numa_cleanup_meminfo(struct numa_meminfo *mi) */ if (bi->nid != bj->nid) continue; - start = min(bi->start, bj->start); - end = max(bi->end, bj->end); + start = max(min(bi->start, bj->start), low); + end = min(max(bi->end, bj->end), high); for (k = 0; k < mi->nr_blks; k++) { struct numa_memblk *bk = &mi->blk[k]; @@ -338,6 +337,11 @@ static int __init numa_cleanup_meminfo(struct numa_meminfo *mi) } } + for (i = mi->nr_blks; i < ARRAY_SIZE(mi->blk); i++) { + mi->blk[i].start = mi->blk[i].end = 0; + mi->blk[i].nid = NUMA_NO_NODE; + } + return 0; } @@ -824,10 +828,8 @@ void __init initmem_init(void) if (numa_init[i]() < 0) continue; - /* clean up the node list */ - for (j = 0; j < MAX_NUMNODES; j++) - cutoff_node(j, 0, max_pfn << PAGE_SHIFT); - + if (numa_cleanup_meminfo(&numa_meminfo) < 0) + continue; #ifdef CONFIG_NUMA_EMU setup_physnodes(0, max_pfn << PAGE_SHIFT); if (cmdline && !numa_emulation(0, max_pfn, i == 0, i == 1)) @@ -836,9 +838,6 @@ void __init initmem_init(void) nodes_clear(node_possible_map); nodes_clear(node_online_map); #endif - if (numa_cleanup_meminfo(&numa_meminfo) < 0) - continue; - if (numa_register_memblks(&numa_meminfo) < 0) continue; -- cgit v1.2.3-18-g5258 From a844ef46fa3055165c28feede6114a711b8375ad Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 16 Feb 2011 17:11:09 +0100 Subject: x86-64, NUMA: Add common find_node_by_addr() srat_64.c and amdtopology_64.c had their own versions of find_node_by_addr() which were basically the same. Add common one in numa_64.c and remove the duplicates. Signed-off-by: Tejun Heo Cc: Yinghai Lu Cc: Brian Gerst Cc: Cyrill Gorcunov Cc: Shaohui Zheng Cc: David Rientjes Cc: Ingo Molnar Cc: H. Peter Anvin --- arch/x86/include/asm/numa_64.h | 1 + arch/x86/mm/amdtopology_64.c | 13 ------------- arch/x86/mm/numa_64.c | 19 +++++++++++++++++++ arch/x86/mm/srat_64.c | 18 ------------------ 4 files changed, 20 insertions(+), 31 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/numa_64.h b/arch/x86/include/asm/numa_64.h index e925605150a..925ade9d67e 100644 --- a/arch/x86/include/asm/numa_64.h +++ b/arch/x86/include/asm/numa_64.h @@ -35,6 +35,7 @@ extern int __init numa_add_memblk(int nodeid, u64 start, u64 end); #define FAKE_NODE_MIN_SIZE ((u64)32 << 20) #define FAKE_NODE_MIN_HASH_MASK (~(FAKE_NODE_MIN_SIZE - 1UL)) void numa_emu_cmdline(char *); +int __init find_node_by_addr(unsigned long addr); #endif /* CONFIG_NUMA_EMU */ #else static inline int numa_cpu_node(int cpu) { return NUMA_NO_NODE; } diff --git a/arch/x86/mm/amdtopology_64.c b/arch/x86/mm/amdtopology_64.c index 90cf297b3b5..8f7a5eb4bd3 100644 --- a/arch/x86/mm/amdtopology_64.c +++ b/arch/x86/mm/amdtopology_64.c @@ -205,19 +205,6 @@ static s16 fake_apicid_to_node[MAX_LOCAL_APIC] __initdata = { [0 ... MAX_LOCAL_APIC-1] = NUMA_NO_NODE }; -static int __init find_node_by_addr(unsigned long addr) -{ - int ret = NUMA_NO_NODE; - int i; - - for (i = 0; i < 8; i++) - if (addr >= numa_nodes[i].start && addr < numa_nodes[i].end) { - ret = i; - break; - } - return ret; -} - /* * For NUMA emulation, fake proximity domain (_PXM) to node id mappings must be * setup to represent the physical topology but reflect the emulated diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index 20aa1d31e16..681bc0d59db 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -430,6 +430,25 @@ void __init numa_emu_cmdline(char *str) cmdline = str; } +int __init find_node_by_addr(unsigned long addr) +{ + int ret = NUMA_NO_NODE; + int i; + + for_each_node_mask(i, mem_nodes_parsed) { + /* + * Find the real node that this emulated node appears on. For + * the sake of simplicity, we only use a real node's starting + * address to determine which emulated node it appears on. + */ + if (addr >= numa_nodes[i].start && addr < numa_nodes[i].end) { + ret = i; + break; + } + } + return ret; +} + static int __init setup_physnodes(unsigned long start, unsigned long end) { int ret = 0; diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index d56eff811cd..51d07338d2e 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -277,24 +277,6 @@ static int fake_node_to_pxm_map[MAX_NUMNODES] __initdata = { static s16 fake_apicid_to_node[MAX_LOCAL_APIC] __initdata = { [0 ... MAX_LOCAL_APIC-1] = NUMA_NO_NODE }; -static int __init find_node_by_addr(unsigned long addr) -{ - int ret = NUMA_NO_NODE; - int i; - - for_each_node_mask(i, mem_nodes_parsed) { - /* - * Find the real node that this emulated node appears on. For - * the sake of simplicity, we only use a real node's starting - * address to determine which emulated node it appears on. - */ - if (addr >= numa_nodes[i].start && addr < numa_nodes[i].end) { - ret = i; - break; - } - } - return ret; -} /* * In NUMA emulation, we need to setup proximity domain (_PXM) to node ID -- cgit v1.2.3-18-g5258 From 91556237ec872e1029e3036174bae3b1a8df65eb Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 16 Feb 2011 17:11:09 +0100 Subject: x86-64, NUMA: Kill numa_nodes[] numa_nodes[] doesn't carry any information which isn't present in numa_meminfo. Each entry is simply min/max range of all the memblks for the node. This is not only redundant but also inaccurate when memblks for different nodes interleave - for example, find_node_by_addr() can return the wrong nodeid. Kill numa_nodes[] and always use numa_meminfo instead. * nodes_cover_memory() is renamed to numa_meminfo_cover_memory() and now operations on numa_meminfo and returns bool. * setup_node_bootmem() needs min/max range. Compute the range on the fly. setup_node_bootmem() invocation is restructured to use outer loop instead of hardcoding the double invocations. * find_node_by_addr() now operates on numa_meminfo. * setup_physnodes() builds physnodes[] from memblks. This will go away when emulation code is updated to use struct numa_meminfo. This patch also makes the following misc changes. * Clearing of nodes_add[] clearing is converted to memset(). * numa_add_memblk() in amd_numa_init() is moved down a bit for consistency. Signed-off-by: Tejun Heo Cc: Yinghai Lu Cc: Brian Gerst Cc: Cyrill Gorcunov Cc: Shaohui Zheng Cc: David Rientjes Cc: Ingo Molnar Cc: H. Peter Anvin --- arch/x86/include/asm/numa_64.h | 1 - arch/x86/mm/amdtopology_64.c | 6 +--- arch/x86/mm/numa_64.c | 82 ++++++++++++++++++++++++------------------ arch/x86/mm/srat_64.c | 22 +++--------- 4 files changed, 53 insertions(+), 58 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/numa_64.h b/arch/x86/include/asm/numa_64.h index 925ade9d67e..20b69a98f37 100644 --- a/arch/x86/include/asm/numa_64.h +++ b/arch/x86/include/asm/numa_64.h @@ -26,7 +26,6 @@ extern void setup_node_bootmem(int nodeid, unsigned long start, extern nodemask_t cpu_nodes_parsed __initdata; extern nodemask_t mem_nodes_parsed __initdata; -extern struct bootnode numa_nodes[MAX_NUMNODES] __initdata; extern int __cpuinit numa_cpu_node(int cpu); extern int __init numa_add_memblk(int nodeid, u64 start, u64 end); diff --git a/arch/x86/mm/amdtopology_64.c b/arch/x86/mm/amdtopology_64.c index 8f7a5eb4bd3..0cb59e58200 100644 --- a/arch/x86/mm/amdtopology_64.c +++ b/arch/x86/mm/amdtopology_64.c @@ -165,12 +165,8 @@ int __init amd_numa_init(void) pr_info("Node %d MemBase %016lx Limit %016lx\n", nodeid, base, limit); - numa_nodes[nodeid].start = base; - numa_nodes[nodeid].end = limit; - numa_add_memblk(nodeid, base, limit); - prevbase = base; - + numa_add_memblk(nodeid, base, limit); node_set(nodeid, mem_nodes_parsed); node_set(nodeid, cpu_nodes_parsed); } diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index 681bc0d59db..c490448d716 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -46,8 +46,6 @@ static unsigned long __initdata nodemap_size; static struct numa_meminfo numa_meminfo __initdata; -struct bootnode numa_nodes[MAX_NUMNODES] __initdata; - /* * Given a shift value, try to populate memnodemap[] * Returns : @@ -349,17 +347,17 @@ static int __init numa_cleanup_meminfo(struct numa_meminfo *mi) * Sanity check to catch more bad NUMA configurations (they are amazingly * common). Make sure the nodes cover all memory. */ -static int __init nodes_cover_memory(const struct bootnode *nodes) +static bool __init numa_meminfo_cover_memory(const struct numa_meminfo *mi) { unsigned long numaram, e820ram; int i; numaram = 0; - for_each_node_mask(i, mem_nodes_parsed) { - unsigned long s = nodes[i].start >> PAGE_SHIFT; - unsigned long e = nodes[i].end >> PAGE_SHIFT; + for (i = 0; i < mi->nr_blks; i++) { + unsigned long s = mi->blk[i].start >> PAGE_SHIFT; + unsigned long e = mi->blk[i].end >> PAGE_SHIFT; numaram += e - s; - numaram -= __absent_pages_in_range(i, s, e); + numaram -= __absent_pages_in_range(mi->blk[i].nid, s, e); if ((long)numaram < 0) numaram = 0; } @@ -371,14 +369,14 @@ static int __init nodes_cover_memory(const struct bootnode *nodes) printk(KERN_ERR "NUMA: nodes only cover %luMB of your %luMB e820 RAM. Not used.\n", (numaram << PAGE_SHIFT) >> 20, (e820ram << PAGE_SHIFT) >> 20); - return 0; + return false; } - return 1; + return true; } static int __init numa_register_memblks(struct numa_meminfo *mi) { - int i; + int i, j, nid; /* Account for nodes with cpus and no memory */ nodes_or(node_possible_map, mem_nodes_parsed, cpu_nodes_parsed); @@ -398,23 +396,34 @@ static int __init numa_register_memblks(struct numa_meminfo *mi) /* for out of order entries */ sort_node_map(); - if (!nodes_cover_memory(numa_nodes)) + if (!numa_meminfo_cover_memory(mi)) return -EINVAL; init_memory_mapping_high(); - /* Finally register nodes. */ - for_each_node_mask(i, node_possible_map) - setup_node_bootmem(i, numa_nodes[i].start, numa_nodes[i].end); - /* - * Try again in case setup_node_bootmem missed one due to missing - * bootmem. + * Finally register nodes. Do it twice in case setup_node_bootmem + * missed one due to missing bootmem. */ - for_each_node_mask(i, node_possible_map) - if (!node_online(i)) - setup_node_bootmem(i, numa_nodes[i].start, - numa_nodes[i].end); + for (i = 0; i < 2; i++) { + for_each_node_mask(nid, node_possible_map) { + u64 start = (u64)max_pfn << PAGE_SHIFT; + u64 end = 0; + + if (node_online(nid)) + continue; + + for (j = 0; j < mi->nr_blks; j++) { + if (nid != mi->blk[j].nid) + continue; + start = min(mi->blk[j].start, start); + end = max(mi->blk[j].end, end); + } + + if (start < end) + setup_node_bootmem(nid, start, end); + } + } return 0; } @@ -432,33 +441,41 @@ void __init numa_emu_cmdline(char *str) int __init find_node_by_addr(unsigned long addr) { - int ret = NUMA_NO_NODE; + const struct numa_meminfo *mi = &numa_meminfo; int i; - for_each_node_mask(i, mem_nodes_parsed) { + for (i = 0; i < mi->nr_blks; i++) { /* * Find the real node that this emulated node appears on. For * the sake of simplicity, we only use a real node's starting * address to determine which emulated node it appears on. */ - if (addr >= numa_nodes[i].start && addr < numa_nodes[i].end) { - ret = i; - break; - } + if (addr >= mi->blk[i].start && addr < mi->blk[i].end) + return mi->blk[i].nid; } - return ret; + return NUMA_NO_NODE; } static int __init setup_physnodes(unsigned long start, unsigned long end) { + const struct numa_meminfo *mi = &numa_meminfo; int ret = 0; int i; memset(physnodes, 0, sizeof(physnodes)); - for_each_node_mask(i, mem_nodes_parsed) { - physnodes[i].start = numa_nodes[i].start; - physnodes[i].end = numa_nodes[i].end; + for (i = 0; i < mi->nr_blks; i++) { + int nid = mi->blk[i].nid; + + if (physnodes[nid].start == physnodes[nid].end) { + physnodes[nid].start = mi->blk[i].start; + physnodes[nid].end = mi->blk[i].end; + } else { + physnodes[nid].start = min(physnodes[nid].start, + mi->blk[i].start); + physnodes[nid].end = max(physnodes[nid].end, + mi->blk[i].end); + } } /* @@ -809,8 +826,6 @@ static int dummy_numa_init(void) node_set(0, cpu_nodes_parsed); node_set(0, mem_nodes_parsed); numa_add_memblk(0, 0, (u64)max_pfn << PAGE_SHIFT); - numa_nodes[0].start = 0; - numa_nodes[0].end = (u64)max_pfn << PAGE_SHIFT; return 0; } @@ -841,7 +856,6 @@ void __init initmem_init(void) nodes_clear(node_possible_map); nodes_clear(node_online_map); memset(&numa_meminfo, 0, sizeof(numa_meminfo)); - memset(numa_nodes, 0, sizeof(numa_nodes)); remove_all_active_ranges(); if (numa_init[i]() < 0) diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index 51d07338d2e..e8b3b3cb2c2 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -37,13 +37,9 @@ static __init int setup_node(int pxm) static __init void bad_srat(void) { - int i; printk(KERN_ERR "SRAT: SRAT not used.\n"); acpi_numa = -1; - for (i = 0; i < MAX_NUMNODES; i++) { - numa_nodes[i].start = numa_nodes[i].end = 0; - nodes_add[i].start = nodes_add[i].end = 0; - } + memset(nodes_add, 0, sizeof(nodes_add)); } static __init inline int srat_disabled(void) @@ -210,7 +206,6 @@ update_nodes_add(int node, unsigned long start, unsigned long end) void __init acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) { - struct bootnode *nd; unsigned long start, end; int node, pxm; @@ -243,18 +238,9 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) printk(KERN_INFO "SRAT: Node %u PXM %u %lx-%lx\n", node, pxm, start, end); - if (!(ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE)) { - nd = &numa_nodes[node]; - if (!node_test_and_set(node, mem_nodes_parsed)) { - nd->start = start; - nd->end = end; - } else { - if (start < nd->start) - nd->start = start; - if (nd->end < end) - nd->end = end; - } - } else + if (!(ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE)) + node_set(node, mem_nodes_parsed); + else update_nodes_add(node, start, end); } -- cgit v1.2.3-18-g5258 From 92d4a4371eeb89e1e12b9ebbed0956f499b6c2c0 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 16 Feb 2011 17:11:09 +0100 Subject: x86-64, NUMA: Rename cpu_nodes_parsed to numa_nodes_parsed It's no longer necessary to keep both cpu_nodes_parsed and mem_nodes_parsed. In preparation for merge, rename cpu_nodes_parsed to numa_nodes_parsed. Signed-off-by: Tejun Heo Cc: Yinghai Lu Cc: Brian Gerst Cc: Cyrill Gorcunov Cc: Shaohui Zheng Cc: David Rientjes Cc: Ingo Molnar Cc: H. Peter Anvin --- arch/x86/include/asm/numa_64.h | 2 +- arch/x86/mm/amdtopology_64.c | 4 ++-- arch/x86/mm/numa_64.c | 8 ++++---- arch/x86/mm/srat_64.c | 6 +++--- 4 files changed, 10 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/numa_64.h b/arch/x86/include/asm/numa_64.h index 20b69a98f37..6e944696144 100644 --- a/arch/x86/include/asm/numa_64.h +++ b/arch/x86/include/asm/numa_64.h @@ -24,7 +24,7 @@ extern void setup_node_bootmem(int nodeid, unsigned long start, */ #define NODE_MIN_SIZE (4*1024*1024) -extern nodemask_t cpu_nodes_parsed __initdata; +extern nodemask_t numa_nodes_parsed __initdata; extern nodemask_t mem_nodes_parsed __initdata; extern int __cpuinit numa_cpu_node(int cpu); diff --git a/arch/x86/mm/amdtopology_64.c b/arch/x86/mm/amdtopology_64.c index 0cb59e58200..e76bffabc09 100644 --- a/arch/x86/mm/amdtopology_64.c +++ b/arch/x86/mm/amdtopology_64.c @@ -168,7 +168,7 @@ int __init amd_numa_init(void) prevbase = base; numa_add_memblk(nodeid, base, limit); node_set(nodeid, mem_nodes_parsed); - node_set(nodeid, cpu_nodes_parsed); + node_set(nodeid, numa_nodes_parsed); } if (!nodes_weight(mem_nodes_parsed)) @@ -189,7 +189,7 @@ int __init amd_numa_init(void) apicid_base = boot_cpu_physical_apicid; } - for_each_node_mask(i, cpu_nodes_parsed) + for_each_node_mask(i, numa_nodes_parsed) for (j = apicid_base; j < cores + apicid_base; j++) set_apicid_to_node((i << bits) + j, i); diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index c490448d716..6e4fbd77756 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -36,7 +36,7 @@ struct numa_meminfo { struct pglist_data *node_data[MAX_NUMNODES] __read_mostly; EXPORT_SYMBOL(node_data); -nodemask_t cpu_nodes_parsed __initdata; +nodemask_t numa_nodes_parsed __initdata; nodemask_t mem_nodes_parsed __initdata; struct memnode memnode; @@ -379,7 +379,7 @@ static int __init numa_register_memblks(struct numa_meminfo *mi) int i, j, nid; /* Account for nodes with cpus and no memory */ - nodes_or(node_possible_map, mem_nodes_parsed, cpu_nodes_parsed); + nodes_or(node_possible_map, mem_nodes_parsed, numa_nodes_parsed); if (WARN_ON(nodes_empty(node_possible_map))) return -EINVAL; @@ -823,7 +823,7 @@ static int dummy_numa_init(void) printk(KERN_INFO "Faking a node at %016lx-%016lx\n", 0LU, max_pfn << PAGE_SHIFT); - node_set(0, cpu_nodes_parsed); + node_set(0, numa_nodes_parsed); node_set(0, mem_nodes_parsed); numa_add_memblk(0, 0, (u64)max_pfn << PAGE_SHIFT); @@ -851,7 +851,7 @@ void __init initmem_init(void) for (j = 0; j < MAX_LOCAL_APIC; j++) set_apicid_to_node(j, NUMA_NO_NODE); - nodes_clear(cpu_nodes_parsed); + nodes_clear(numa_nodes_parsed); nodes_clear(mem_nodes_parsed); nodes_clear(node_possible_map); nodes_clear(node_online_map); diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index e8b3b3cb2c2..8185189d34a 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -94,7 +94,7 @@ acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa) return; } set_apicid_to_node(apic_id, node); - node_set(node, cpu_nodes_parsed); + node_set(node, numa_nodes_parsed); acpi_numa = 1; printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%04x -> Node %u\n", pxm, apic_id, node); @@ -134,7 +134,7 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa) } set_apicid_to_node(apic_id, node); - node_set(node, cpu_nodes_parsed); + node_set(node, numa_nodes_parsed); acpi_numa = 1; printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%02x -> Node %u\n", pxm, apic_id, node); @@ -196,7 +196,7 @@ update_nodes_add(int node, unsigned long start, unsigned long end) } if (changed) { - node_set(node, cpu_nodes_parsed); + node_set(node, numa_nodes_parsed); printk(KERN_INFO "SRAT: hot plug zone found %Lx - %Lx\n", nd->start, nd->end); } -- cgit v1.2.3-18-g5258 From 4697bdcc945c094d2c8a4876a24faeaf31a283e0 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 16 Feb 2011 17:11:09 +0100 Subject: x86-64, NUMA: Kill mem_nodes_parsed With all memory configuration information now carried in numa_meminfo, there's no need to keep mem_nodes_parsed separate. Drop it and use numa_nodes_parsed for CPU / memory-less nodes. A new helper numa_nodemask_from_meminfo() is added to calculate memnode mask on the fly which is currently used to set node_possible_map. This simplifies NUMA init methods a bit and removes a source of possible inconsistencies. Signed-off-by: Tejun Heo Cc: Yinghai Lu Cc: Brian Gerst Cc: Cyrill Gorcunov Cc: Shaohui Zheng Cc: David Rientjes Cc: Ingo Molnar Cc: H. Peter Anvin --- arch/x86/include/asm/numa_64.h | 1 - arch/x86/mm/amdtopology_64.c | 5 ++--- arch/x86/mm/numa_64.c | 20 ++++++++++++++++---- arch/x86/mm/srat_64.c | 7 ++----- 4 files changed, 20 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/numa_64.h b/arch/x86/include/asm/numa_64.h index 6e944696144..f42710bd3e7 100644 --- a/arch/x86/include/asm/numa_64.h +++ b/arch/x86/include/asm/numa_64.h @@ -25,7 +25,6 @@ extern void setup_node_bootmem(int nodeid, unsigned long start, #define NODE_MIN_SIZE (4*1024*1024) extern nodemask_t numa_nodes_parsed __initdata; -extern nodemask_t mem_nodes_parsed __initdata; extern int __cpuinit numa_cpu_node(int cpu); extern int __init numa_add_memblk(int nodeid, u64 start, u64 end); diff --git a/arch/x86/mm/amdtopology_64.c b/arch/x86/mm/amdtopology_64.c index e76bffabc09..fd7b609025b 100644 --- a/arch/x86/mm/amdtopology_64.c +++ b/arch/x86/mm/amdtopology_64.c @@ -122,7 +122,7 @@ int __init amd_numa_init(void) nodeid, (base >> 8) & 3, (limit >> 8) & 3); return -EINVAL; } - if (node_isset(nodeid, mem_nodes_parsed)) { + if (node_isset(nodeid, numa_nodes_parsed)) { pr_info("Node %d already present, skipping\n", nodeid); continue; @@ -167,11 +167,10 @@ int __init amd_numa_init(void) prevbase = base; numa_add_memblk(nodeid, base, limit); - node_set(nodeid, mem_nodes_parsed); node_set(nodeid, numa_nodes_parsed); } - if (!nodes_weight(mem_nodes_parsed)) + if (!nodes_weight(numa_nodes_parsed)) return -ENOENT; /* diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index 6e4fbd77756..8b1f178a866 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -37,7 +37,6 @@ struct pglist_data *node_data[MAX_NUMNODES] __read_mostly; EXPORT_SYMBOL(node_data); nodemask_t numa_nodes_parsed __initdata; -nodemask_t mem_nodes_parsed __initdata; struct memnode memnode; @@ -343,6 +342,20 @@ static int __init numa_cleanup_meminfo(struct numa_meminfo *mi) return 0; } +/* + * Set nodes, which have memory in @mi, in *@nodemask. + */ +static void __init numa_nodemask_from_meminfo(nodemask_t *nodemask, + const struct numa_meminfo *mi) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(mi->blk); i++) + if (mi->blk[i].start != mi->blk[i].end && + mi->blk[i].nid != NUMA_NO_NODE) + node_set(mi->blk[i].nid, *nodemask); +} + /* * Sanity check to catch more bad NUMA configurations (they are amazingly * common). Make sure the nodes cover all memory. @@ -379,7 +392,8 @@ static int __init numa_register_memblks(struct numa_meminfo *mi) int i, j, nid; /* Account for nodes with cpus and no memory */ - nodes_or(node_possible_map, mem_nodes_parsed, numa_nodes_parsed); + node_possible_map = numa_nodes_parsed; + numa_nodemask_from_meminfo(&node_possible_map, mi); if (WARN_ON(nodes_empty(node_possible_map))) return -EINVAL; @@ -824,7 +838,6 @@ static int dummy_numa_init(void) 0LU, max_pfn << PAGE_SHIFT); node_set(0, numa_nodes_parsed); - node_set(0, mem_nodes_parsed); numa_add_memblk(0, 0, (u64)max_pfn << PAGE_SHIFT); return 0; @@ -852,7 +865,6 @@ void __init initmem_init(void) set_apicid_to_node(j, NUMA_NO_NODE); nodes_clear(numa_nodes_parsed); - nodes_clear(mem_nodes_parsed); nodes_clear(node_possible_map); nodes_clear(node_online_map); memset(&numa_meminfo, 0, sizeof(numa_meminfo)); diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index 8185189d34a..4f8e6cde9bf 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -238,9 +238,7 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) printk(KERN_INFO "SRAT: Node %u PXM %u %lx-%lx\n", node, pxm, start, end); - if (!(ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE)) - node_set(node, mem_nodes_parsed); - else + if (ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) update_nodes_add(node, start, end); } @@ -310,10 +308,9 @@ void __init acpi_fake_nodes(const struct bootnode *fake_nodes, int num_nodes) __acpi_map_pxm_to_node(fake_node_to_pxm_map[i], i); memcpy(__apicid_to_node, fake_apicid_to_node, sizeof(__apicid_to_node)); - nodes_clear(mem_nodes_parsed); for (i = 0; i < num_nodes; i++) if (fake_nodes[i].start != fake_nodes[i].end) - node_set(i, mem_nodes_parsed); + node_set(i, numa_nodes_parsed); } static int null_slit_node_compare(int a, int b) -- cgit v1.2.3-18-g5258 From ac7136b611ee8f8bd6231ce2e1dbdd31ae3d39bc Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 16 Feb 2011 17:11:09 +0100 Subject: x86-64, NUMA: Implement generic node distance handling Node distance either used direct node comparison, ACPI PXM comparison or ACPI SLIT table lookup. This patch implements generic node distance handling. NUMA init methods can call numa_set_distance() to set distance between nodes and the common __node_distance() implementation will report the set distance. Due to the way NUMA emulation is implemented, the generic node distance handling is used only when emulation is not used. Later patches will update NUMA emulation to use the generic distance mechanism. Signed-off-by: Tejun Heo Cc: Yinghai Lu Cc: Brian Gerst Cc: Cyrill Gorcunov Cc: Shaohui Zheng Cc: David Rientjes Cc: Ingo Molnar Cc: H. Peter Anvin --- arch/x86/include/asm/acpi.h | 1 + arch/x86/include/asm/numa_64.h | 1 + arch/x86/include/asm/topology.h | 2 +- arch/x86/mm/numa_64.c | 95 +++++++++++++++++++++++++++++++++++++++++ arch/x86/mm/srat_64.c | 27 +++++------- 5 files changed, 109 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h index cfa3d5c3144..9c9fe1b0bc4 100644 --- a/arch/x86/include/asm/acpi.h +++ b/arch/x86/include/asm/acpi.h @@ -190,6 +190,7 @@ extern int x86_acpi_numa_init(void); #ifdef CONFIG_NUMA_EMU extern void acpi_fake_nodes(const struct bootnode *fake_nodes, int num_nodes); +extern int acpi_emu_node_distance(int a, int b); #endif #endif /* CONFIG_ACPI_NUMA */ diff --git a/arch/x86/include/asm/numa_64.h b/arch/x86/include/asm/numa_64.h index f42710bd3e7..5361c594798 100644 --- a/arch/x86/include/asm/numa_64.h +++ b/arch/x86/include/asm/numa_64.h @@ -28,6 +28,7 @@ extern nodemask_t numa_nodes_parsed __initdata; extern int __cpuinit numa_cpu_node(int cpu); extern int __init numa_add_memblk(int nodeid, u64 start, u64 end); +extern void __init numa_set_distance(int from, int to, int distance); #ifdef CONFIG_NUMA_EMU #define FAKE_NODE_MIN_SIZE ((u64)32 << 20) diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h index b101c17861f..910a7084f7f 100644 --- a/arch/x86/include/asm/topology.h +++ b/arch/x86/include/asm/topology.h @@ -138,7 +138,7 @@ extern unsigned long node_remap_size[]; .balance_interval = 1, \ } -#ifdef CONFIG_X86_64_ACPI_NUMA +#ifdef CONFIG_X86_64 extern int __node_distance(int, int); #define node_distance(a, b) __node_distance(a, b) #endif diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index 8b1f178a866..a3621f2953d 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -45,6 +45,13 @@ static unsigned long __initdata nodemap_size; static struct numa_meminfo numa_meminfo __initdata; +static int numa_distance_cnt; +static u8 *numa_distance; + +#ifdef CONFIG_NUMA_EMU +static bool numa_emu_dist; +#endif + /* * Given a shift value, try to populate memnodemap[] * Returns : @@ -356,6 +363,92 @@ static void __init numa_nodemask_from_meminfo(nodemask_t *nodemask, node_set(mi->blk[i].nid, *nodemask); } +/* + * Reset distance table. The current table is freed. The next + * numa_set_distance() call will create a new one. + */ +static void __init numa_reset_distance(void) +{ + size_t size; + + size = numa_distance_cnt * sizeof(numa_distance[0]); + memblock_x86_free_range(__pa(numa_distance), + __pa(numa_distance) + size); + numa_distance = NULL; + numa_distance_cnt = 0; +} + +/* + * Set the distance between node @from to @to to @distance. If distance + * table doesn't exist, one which is large enough to accomodate all the + * currently known nodes will be created. + */ +void __init numa_set_distance(int from, int to, int distance) +{ + if (!numa_distance) { + nodemask_t nodes_parsed; + size_t size; + int i, j, cnt = 0; + u64 phys; + + /* size the new table and allocate it */ + nodes_parsed = numa_nodes_parsed; + numa_nodemask_from_meminfo(&nodes_parsed, &numa_meminfo); + + for_each_node_mask(i, nodes_parsed) + cnt = i; + size = ++cnt * sizeof(numa_distance[0]); + + phys = memblock_find_in_range(0, + (u64)max_pfn_mapped << PAGE_SHIFT, + size, PAGE_SIZE); + if (phys == MEMBLOCK_ERROR) { + pr_warning("NUMA: Warning: can't allocate distance table!\n"); + /* don't retry until explicitly reset */ + numa_distance = (void *)1LU; + return; + } + memblock_x86_reserve_range(phys, phys + size, "NUMA DIST"); + + numa_distance = __va(phys); + numa_distance_cnt = cnt; + + /* fill with the default distances */ + for (i = 0; i < cnt; i++) + for (j = 0; j < cnt; j++) + numa_distance[i * cnt + j] = i == j ? + LOCAL_DISTANCE : REMOTE_DISTANCE; + printk(KERN_DEBUG "NUMA: Initialized distance table, cnt=%d\n", cnt); + } + + if (from >= numa_distance_cnt || to >= numa_distance_cnt) { + printk_once(KERN_DEBUG "NUMA: Debug: distance out of bound, from=%d to=%d distance=%d\n", + from, to, distance); + return; + } + + if ((u8)distance != distance || + (from == to && distance != LOCAL_DISTANCE)) { + pr_warn_once("NUMA: Warning: invalid distance parameter, from=%d to=%d distance=%d\n", + from, to, distance); + return; + } + + numa_distance[from * numa_distance_cnt + to] = distance; +} + +int __node_distance(int from, int to) +{ +#if defined(CONFIG_ACPI_NUMA) && defined(CONFIG_NUMA_EMU) + if (numa_emu_dist) + return acpi_emu_node_distance(from, to); +#endif + if (from >= numa_distance_cnt || to >= numa_distance_cnt) + return from == to ? LOCAL_DISTANCE : REMOTE_DISTANCE; + return numa_distance[from * numa_distance_cnt + to]; +} +EXPORT_SYMBOL(__node_distance); + /* * Sanity check to catch more bad NUMA configurations (they are amazingly * common). Make sure the nodes cover all memory. @@ -826,6 +919,7 @@ static int __init numa_emulation(unsigned long start_pfn, setup_physnodes(addr, max_addr); fake_physnodes(acpi, amd, num_nodes); numa_init_array(); + numa_emu_dist = true; return 0; } #endif /* CONFIG_NUMA_EMU */ @@ -869,6 +963,7 @@ void __init initmem_init(void) nodes_clear(node_online_map); memset(&numa_meminfo, 0, sizeof(numa_meminfo)); remove_all_active_ranges(); + numa_reset_distance(); if (numa_init[i]() < 0) continue; diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index 4f8e6cde9bf..d2f53f35d86 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -50,9 +50,16 @@ static __init inline int srat_disabled(void) /* Callback for SLIT parsing */ void __init acpi_numa_slit_init(struct acpi_table_slit *slit) { + int i, j; unsigned length; unsigned long phys; + for (i = 0; i < slit->locality_count; i++) + for (j = 0; j < slit->locality_count; j++) + numa_set_distance(pxm_to_node(i), pxm_to_node(j), + slit->entry[slit->locality_count * i + j]); + + /* acpi_slit is used only by emulation */ length = slit->header.length; phys = memblock_find_in_range(0, max_pfn_mapped<locality_count * node_to_pxm(a); return acpi_slit->entry[index + node_to_pxm(b)]; } - -EXPORT_SYMBOL(__node_distance); +#endif /* CONFIG_NUMA_EMU */ #if defined(CONFIG_MEMORY_HOTPLUG_SPARSE) || defined(CONFIG_ACPI_HOTPLUG_MEMORY) int memory_add_physaddr_to_nid(u64 start) -- cgit v1.2.3-18-g5258 From d9c515eacb3bde73f7a5ecb7e35ea6e660ad421d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 16 Feb 2011 17:11:10 +0100 Subject: x86-64, NUMA: Trivial changes to prepare for emulation updates * Separate out numa_add_memblk_to() from numa_add_memblk() so that different numa_meminfo can be used. * Rename cmdline to emu_cmdline. * Drop @start/last_pfn from numa_emulation() and use max_pfn directly. This patch doesn't introduce any behavior change. Signed-off-by: Tejun Heo Cc: Yinghai Lu Cc: Brian Gerst Cc: Cyrill Gorcunov Cc: Shaohui Zheng Cc: David Rientjes Cc: Ingo Molnar Cc: H. Peter Anvin --- arch/x86/mm/numa_64.c | 34 ++++++++++++++++++---------------- 1 file changed, 18 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index a3621f2953d..20e2cfe5ab8 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -193,10 +193,9 @@ static void * __init early_node_mem(int nodeid, unsigned long start, return NULL; } -int __init numa_add_memblk(int nid, u64 start, u64 end) +static int __init numa_add_memblk_to(int nid, u64 start, u64 end, + struct numa_meminfo *mi) { - struct numa_meminfo *mi = &numa_meminfo; - /* ignore zero length blks */ if (start == end) return 0; @@ -227,6 +226,11 @@ static void __init numa_remove_memblk_from(int idx, struct numa_meminfo *mi) (mi->nr_blks - idx) * sizeof(mi->blk[0])); } +int __init numa_add_memblk(int nid, u64 start, u64 end) +{ + return numa_add_memblk_to(nid, start, end, &numa_meminfo); +} + /* Initialize bootmem allocator for a node */ void __init setup_node_bootmem(int nodeid, unsigned long start, unsigned long end) @@ -539,11 +543,11 @@ static int __init numa_register_memblks(struct numa_meminfo *mi) /* Numa emulation */ static struct bootnode nodes[MAX_NUMNODES] __initdata; static struct bootnode physnodes[MAX_NUMNODES] __cpuinitdata; -static char *cmdline __initdata; +static char *emu_cmdline __initdata; void __init numa_emu_cmdline(char *str) { - cmdline = str; + emu_cmdline = str; } int __init find_node_by_addr(unsigned long addr) @@ -861,12 +865,10 @@ static int __init split_nodes_size_interleave(u64 addr, u64 max_addr, u64 size) * Sets up the system RAM area from start_pfn to last_pfn according to the * numa=fake command-line option. */ -static int __init numa_emulation(unsigned long start_pfn, - unsigned long last_pfn, int acpi, int amd) +static int __init numa_emulation(int acpi, int amd) { static struct numa_meminfo ei __initdata; - u64 addr = start_pfn << PAGE_SHIFT; - u64 max_addr = last_pfn << PAGE_SHIFT; + const u64 max_addr = max_pfn << PAGE_SHIFT; int num_nodes; int i; @@ -875,16 +877,16 @@ static int __init numa_emulation(unsigned long start_pfn, * the fixed node size. Otherwise, if it is just a single number N, * split the system RAM into N fake nodes. */ - if (strchr(cmdline, 'M') || strchr(cmdline, 'G')) { + if (strchr(emu_cmdline, 'M') || strchr(emu_cmdline, 'G')) { u64 size; - size = memparse(cmdline, &cmdline); - num_nodes = split_nodes_size_interleave(addr, max_addr, size); + size = memparse(emu_cmdline, &emu_cmdline); + num_nodes = split_nodes_size_interleave(0, max_addr, size); } else { unsigned long n; - n = simple_strtoul(cmdline, NULL, 0); - num_nodes = split_nodes_interleave(addr, max_addr, n); + n = simple_strtoul(emu_cmdline, NULL, 0); + num_nodes = split_nodes_interleave(0, max_addr, n); } if (num_nodes < 0) @@ -916,7 +918,7 @@ static int __init numa_emulation(unsigned long start_pfn, init_memory_mapping_high(); for_each_node_mask(i, node_possible_map) setup_node_bootmem(i, nodes[i].start, nodes[i].end); - setup_physnodes(addr, max_addr); + setup_physnodes(0, max_addr); fake_physnodes(acpi, amd, num_nodes); numa_init_array(); numa_emu_dist = true; @@ -972,7 +974,7 @@ void __init initmem_init(void) continue; #ifdef CONFIG_NUMA_EMU setup_physnodes(0, max_pfn << PAGE_SHIFT); - if (cmdline && !numa_emulation(0, max_pfn, i == 0, i == 1)) + if (emu_cmdline && !numa_emulation(i == 0, i == 1)) return; setup_physnodes(0, max_pfn << PAGE_SHIFT); nodes_clear(node_possible_map); -- cgit v1.2.3-18-g5258 From 9d073caeb372940af02a768d2b7e845ac732bda0 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 16 Feb 2011 17:11:10 +0100 Subject: x86-64, NUMA: Build and use direct emulated nid -> phys nid mapping NUMA emulation copied physical NUMA configuration into physnodes[] and used it to reverse-map emulated nodes to physical nodes, which is unnecessarily convoluted. Build emu_nid_to_phys[] array to map emulated nids directly to the matching physical nids and use it in numa_add_cpu(). physnodes[] will be removed with further patches. - v2: Build failure when CONFIG_DEBUG_PER_CPU_MAPS due to missing local variable definition fixed. Reported by Ingo. Signed-off-by: Tejun Heo Cc: Yinghai Lu Cc: Brian Gerst Cc: Cyrill Gorcunov Cc: Shaohui Zheng Cc: David Rientjes Cc: Ingo Molnar Cc: H. Peter Anvin --- arch/x86/mm/numa_64.c | 64 ++++++++++++++++++++++++++++----------------------- 1 file changed, 35 insertions(+), 29 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index 20e2cfe5ab8..e9919c4d157 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -542,7 +542,9 @@ static int __init numa_register_memblks(struct numa_meminfo *mi) #ifdef CONFIG_NUMA_EMU /* Numa emulation */ static struct bootnode nodes[MAX_NUMNODES] __initdata; -static struct bootnode physnodes[MAX_NUMNODES] __cpuinitdata; +static struct bootnode physnodes[MAX_NUMNODES] __initdata; + +static int emu_nid_to_phys[MAX_NUMNODES] __cpuinitdata; static char *emu_cmdline __initdata; void __init numa_emu_cmdline(char *str) @@ -649,7 +651,8 @@ static void __init fake_physnodes(int acpi, int amd, int nr_nodes) * allocation past addr and -1 otherwise. addr is adjusted to be at * the end of the node. */ -static int __init setup_node_range(int nid, u64 *addr, u64 size, u64 max_addr) +static int __init setup_node_range(int nid, int physnid, + u64 *addr, u64 size, u64 max_addr) { int ret = 0; nodes[nid].start = *addr; @@ -660,6 +663,10 @@ static int __init setup_node_range(int nid, u64 *addr, u64 size, u64 max_addr) } nodes[nid].end = *addr; node_set(nid, node_possible_map); + + if (emu_nid_to_phys[nid] == NUMA_NO_NODE) + emu_nid_to_phys[nid] = physnid; + printk(KERN_INFO "Faking node %d at %016Lx-%016Lx (%LuMB)\n", nid, nodes[nid].start, nodes[nid].end, (nodes[nid].end - nodes[nid].start) >> 20); @@ -756,7 +763,7 @@ static int __init split_nodes_interleave(u64 addr, u64 max_addr, int nr_nodes) if (nodes_weight(physnode_mask) + ret >= nr_nodes) end = physnodes[i].end; - if (setup_node_range(ret++, &physnodes[i].start, + if (setup_node_range(ret++, i, &physnodes[i].start, end - physnodes[i].start, physnodes[i].end) < 0) node_clear(i, physnode_mask); @@ -852,7 +859,7 @@ static int __init split_nodes_size_interleave(u64 addr, u64 max_addr, u64 size) * later. If setup_node_range() returns non-zero, there * is no more memory available on this physical node. */ - if (setup_node_range(ret++, &physnodes[i].start, + if (setup_node_range(ret++, i, &physnodes[i].start, end - physnodes[i].start, physnodes[i].end) < 0) node_clear(i, physnode_mask); @@ -872,6 +879,9 @@ static int __init numa_emulation(int acpi, int amd) int num_nodes; int i; + for (i = 0; i < MAX_NUMNODES; i++) + emu_nid_to_phys[i] = NUMA_NO_NODE; + /* * If the numa=fake command-line contains a 'M' or 'G', it represents * the fixed node size. Otherwise, if it is just a single number N, @@ -892,6 +902,11 @@ static int __init numa_emulation(int acpi, int amd) if (num_nodes < 0) return num_nodes; + /* make sure all emulated nodes are mapped to a physical node */ + for (i = 0; i < ARRAY_SIZE(emu_nid_to_phys); i++) + if (emu_nid_to_phys[i] == NUMA_NO_NODE) + emu_nid_to_phys[i] = 0; + ei.nr_blks = num_nodes; for (i = 0; i < ei.nr_blks; i++) { ei.blk[i].start = nodes[i].start; @@ -918,7 +933,6 @@ static int __init numa_emulation(int acpi, int amd) init_memory_mapping_high(); for_each_node_mask(i, node_possible_map) setup_node_bootmem(i, nodes[i].start, nodes[i].end); - setup_physnodes(0, max_addr); fake_physnodes(acpi, amd, num_nodes); numa_init_array(); numa_emu_dist = true; @@ -976,7 +990,11 @@ void __init initmem_init(void) setup_physnodes(0, max_pfn << PAGE_SHIFT); if (emu_cmdline && !numa_emulation(i == 0, i == 1)) return; - setup_physnodes(0, max_pfn << PAGE_SHIFT); + + /* not emulating, build identity mapping for numa_add_cpu() */ + for (j = 0; j < ARRAY_SIZE(emu_nid_to_phys); j++) + emu_nid_to_phys[j] = j; + nodes_clear(node_possible_map); nodes_clear(node_online_map); #endif @@ -1033,7 +1051,6 @@ int __cpuinit numa_cpu_node(int cpu) # ifndef CONFIG_DEBUG_PER_CPU_MAPS void __cpuinit numa_add_cpu(int cpu) { - unsigned long addr; int physnid, nid; nid = numa_cpu_node(cpu); @@ -1041,26 +1058,15 @@ void __cpuinit numa_add_cpu(int cpu) nid = early_cpu_to_node(cpu); BUG_ON(nid == NUMA_NO_NODE || !node_online(nid)); - /* - * Use the starting address of the emulated node to find which physical - * node it is allocated on. - */ - addr = node_start_pfn(nid) << PAGE_SHIFT; - for (physnid = 0; physnid < MAX_NUMNODES; physnid++) - if (addr >= physnodes[physnid].start && - addr < physnodes[physnid].end) - break; + physnid = emu_nid_to_phys[nid]; /* * Map the cpu to each emulated node that is allocated on the physical * node of the cpu's apic id. */ - for_each_online_node(nid) { - addr = node_start_pfn(nid) << PAGE_SHIFT; - if (addr >= physnodes[physnid].start && - addr < physnodes[physnid].end) + for_each_online_node(nid) + if (emu_nid_to_phys[nid] == physnid) cpumask_set_cpu(cpu, node_to_cpumask_map[nid]); - } } void __cpuinit numa_remove_cpu(int cpu) @@ -1073,21 +1079,21 @@ void __cpuinit numa_remove_cpu(int cpu) # else /* !CONFIG_DEBUG_PER_CPU_MAPS */ static void __cpuinit numa_set_cpumask(int cpu, int enable) { - int node = early_cpu_to_node(cpu); struct cpumask *mask; - int i; + int nid, physnid, i; - if (node == NUMA_NO_NODE) { + nid = early_cpu_to_node(cpu); + if (nid == NUMA_NO_NODE) { /* early_cpu_to_node() already emits a warning and trace */ return; } - for_each_online_node(i) { - unsigned long addr; - addr = node_start_pfn(i) << PAGE_SHIFT; - if (addr < physnodes[node].start || - addr >= physnodes[node].end) + physnid = emu_nid_to_phys[nid]; + + for_each_online_node(i) { + if (emu_nid_to_phys[nid] != physnid) continue; + mask = debug_cpumask_set_cpu(cpu, enable); if (!mask) return; -- cgit v1.2.3-18-g5258 From c88aea7a70b0f014f98c695069ba91abc9e9b9a4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 16 Feb 2011 17:11:10 +0100 Subject: x86-64, NUMA: Make emulation code build numa_meminfo and share the registration path NUMA emulation code built nodes[] array and had its own registration path to set up the emulated nodes. Update it such that it generates emulated numa_meminfo and returns control to initmem_init() and shares the same registration path with non-emulated cases. Because {acpi|amd}_fake_nodes() expect nodes[] parameter, fake_physnodes() now generates nodes[] from numa_meminfo. This will go away with further updates. Signed-off-by: Tejun Heo Cc: Yinghai Lu Cc: Brian Gerst Cc: Cyrill Gorcunov Cc: Shaohui Zheng Cc: David Rientjes Cc: Ingo Molnar Cc: H. Peter Anvin --- arch/x86/mm/numa_64.c | 173 +++++++++++++++++++++++++------------------------- 1 file changed, 86 insertions(+), 87 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index e9919c4d157..9736204337b 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -541,7 +541,6 @@ static int __init numa_register_memblks(struct numa_meminfo *mi) #ifdef CONFIG_NUMA_EMU /* Numa emulation */ -static struct bootnode nodes[MAX_NUMNODES] __initdata; static struct bootnode physnodes[MAX_NUMNODES] __initdata; static int emu_nid_to_phys[MAX_NUMNODES] __cpuinitdata; @@ -626,9 +625,24 @@ static int __init setup_physnodes(unsigned long start, unsigned long end) return ret; } -static void __init fake_physnodes(int acpi, int amd, int nr_nodes) +static void __init fake_physnodes(int acpi, int amd, + const struct numa_meminfo *ei) { - int i; + static struct bootnode nodes[MAX_NUMNODES] __initdata; + int i, nr_nodes = 0; + + for (i = 0; i < ei->nr_blks; i++) { + int nid = ei->blk[i].nid; + + if (nodes[nid].start == nodes[nid].end) { + nodes[nid].start = ei->blk[i].start; + nodes[nid].end = ei->blk[i].end; + nr_nodes++; + } else { + nodes[nid].start = min(ei->blk[i].start, nodes[nid].start); + nodes[nid].end = max(ei->blk[i].end, nodes[nid].end); + } + } BUG_ON(acpi && amd); #ifdef CONFIG_ACPI_NUMA @@ -645,45 +659,44 @@ static void __init fake_physnodes(int acpi, int amd, int nr_nodes) } /* - * Setups up nid to range from addr to addr + size. If the end - * boundary is greater than max_addr, then max_addr is used instead. - * The return value is 0 if there is additional memory left for - * allocation past addr and -1 otherwise. addr is adjusted to be at - * the end of the node. + * Sets up nid to range from @start to @end. The return value is -errno if + * something went wrong, 0 otherwise. */ -static int __init setup_node_range(int nid, int physnid, - u64 *addr, u64 size, u64 max_addr) +static int __init emu_setup_memblk(struct numa_meminfo *ei, + int nid, int physnid, u64 start, u64 end) { - int ret = 0; - nodes[nid].start = *addr; - *addr += size; - if (*addr >= max_addr) { - *addr = max_addr; - ret = -1; + struct numa_memblk *eb = &ei->blk[ei->nr_blks]; + + if (ei->nr_blks >= NR_NODE_MEMBLKS) { + pr_err("NUMA: Too many emulated memblks, failing emulation\n"); + return -EINVAL; } - nodes[nid].end = *addr; - node_set(nid, node_possible_map); + + ei->nr_blks++; + eb->start = start; + eb->end = end; + eb->nid = nid; if (emu_nid_to_phys[nid] == NUMA_NO_NODE) emu_nid_to_phys[nid] = physnid; printk(KERN_INFO "Faking node %d at %016Lx-%016Lx (%LuMB)\n", nid, - nodes[nid].start, nodes[nid].end, - (nodes[nid].end - nodes[nid].start) >> 20); - return ret; + eb->start, eb->end, (eb->end - eb->start) >> 20); + return 0; } /* * Sets up nr_nodes fake nodes interleaved over physical nodes ranging from addr * to max_addr. The return value is the number of nodes allocated. */ -static int __init split_nodes_interleave(u64 addr, u64 max_addr, int nr_nodes) +static int __init split_nodes_interleave(struct numa_meminfo *ei, + u64 addr, u64 max_addr, int nr_nodes) { nodemask_t physnode_mask = NODE_MASK_NONE; u64 size; int big; - int ret = 0; - int i; + int nid = 0; + int i, ret; if (nr_nodes <= 0) return -1; @@ -721,7 +734,7 @@ static int __init split_nodes_interleave(u64 addr, u64 max_addr, int nr_nodes) u64 end = physnodes[i].start + size; u64 dma32_end = PFN_PHYS(MAX_DMA32_PFN); - if (ret < big) + if (nid < big) end += FAKE_NODE_MIN_SIZE; /* @@ -760,16 +773,21 @@ static int __init split_nodes_interleave(u64 addr, u64 max_addr, int nr_nodes) * happen as a result of rounding down each node's size * to FAKE_NODE_MIN_SIZE. */ - if (nodes_weight(physnode_mask) + ret >= nr_nodes) + if (nodes_weight(physnode_mask) + nid >= nr_nodes) end = physnodes[i].end; - if (setup_node_range(ret++, i, &physnodes[i].start, - end - physnodes[i].start, - physnodes[i].end) < 0) + ret = emu_setup_memblk(ei, nid++, i, + physnodes[i].start, + min(end, physnodes[i].end)); + if (ret < 0) + return ret; + + physnodes[i].start = min(end, physnodes[i].end); + if (physnodes[i].start == physnodes[i].end) node_clear(i, physnode_mask); } } - return ret; + return 0; } /* @@ -794,12 +812,13 @@ static u64 __init find_end_of_node(u64 start, u64 max_addr, u64 size) * Sets up fake nodes of `size' interleaved over physical nodes ranging from * `addr' to `max_addr'. The return value is the number of nodes allocated. */ -static int __init split_nodes_size_interleave(u64 addr, u64 max_addr, u64 size) +static int __init split_nodes_size_interleave(struct numa_meminfo *ei, + u64 addr, u64 max_addr, u64 size) { nodemask_t physnode_mask = NODE_MASK_NONE; u64 min_size; - int ret = 0; - int i; + int nid = 0; + int i, ret; if (!size) return -1; @@ -854,30 +873,31 @@ static int __init split_nodes_size_interleave(u64 addr, u64 max_addr, u64 size) memblock_x86_hole_size(end, physnodes[i].end) < size) end = physnodes[i].end; - /* - * Setup the fake node that will be allocated as bootmem - * later. If setup_node_range() returns non-zero, there - * is no more memory available on this physical node. - */ - if (setup_node_range(ret++, i, &physnodes[i].start, - end - physnodes[i].start, - physnodes[i].end) < 0) + ret = emu_setup_memblk(ei, nid++, i, + physnodes[i].start, + min(end, physnodes[i].end)); + if (ret < 0) + return ret; + + physnodes[i].start = min(end, physnodes[i].end); + if (physnodes[i].start == physnodes[i].end) node_clear(i, physnode_mask); } } - return ret; + return 0; } /* * Sets up the system RAM area from start_pfn to last_pfn according to the * numa=fake command-line option. */ -static int __init numa_emulation(int acpi, int amd) +static bool __init numa_emulation(int acpi, int amd) { static struct numa_meminfo ei __initdata; const u64 max_addr = max_pfn << PAGE_SHIFT; - int num_nodes; - int i; + int i, ret; + + memset(&ei, 0, sizeof(ei)); for (i = 0; i < MAX_NUMNODES; i++) emu_nid_to_phys[i] = NUMA_NO_NODE; @@ -891,52 +911,33 @@ static int __init numa_emulation(int acpi, int amd) u64 size; size = memparse(emu_cmdline, &emu_cmdline); - num_nodes = split_nodes_size_interleave(0, max_addr, size); + ret = split_nodes_size_interleave(&ei, 0, max_addr, size); } else { unsigned long n; n = simple_strtoul(emu_cmdline, NULL, 0); - num_nodes = split_nodes_interleave(0, max_addr, n); + ret = split_nodes_interleave(&ei, 0, max_addr, n); + } + + if (ret < 0) + return false; + + if (numa_cleanup_meminfo(&ei) < 0) { + pr_warning("NUMA: Warning: constructed meminfo invalid, disabling emulation\n"); + return false; } - if (num_nodes < 0) - return num_nodes; + /* commit */ + numa_meminfo = ei; /* make sure all emulated nodes are mapped to a physical node */ for (i = 0; i < ARRAY_SIZE(emu_nid_to_phys); i++) if (emu_nid_to_phys[i] == NUMA_NO_NODE) emu_nid_to_phys[i] = 0; - ei.nr_blks = num_nodes; - for (i = 0; i < ei.nr_blks; i++) { - ei.blk[i].start = nodes[i].start; - ei.blk[i].end = nodes[i].end; - ei.blk[i].nid = i; - } - - memnode_shift = compute_hash_shift(&ei); - if (memnode_shift < 0) { - memnode_shift = 0; - printk(KERN_ERR "No NUMA hash function found. NUMA emulation " - "disabled.\n"); - return -1; - } - - /* - * We need to vacate all active ranges that may have been registered for - * the e820 memory map. - */ - remove_all_active_ranges(); - for_each_node_mask(i, node_possible_map) - memblock_x86_register_active_regions(i, nodes[i].start >> PAGE_SHIFT, - nodes[i].end >> PAGE_SHIFT); - init_memory_mapping_high(); - for_each_node_mask(i, node_possible_map) - setup_node_bootmem(i, nodes[i].start, nodes[i].end); - fake_physnodes(acpi, amd, num_nodes); - numa_init_array(); + fake_physnodes(acpi, amd, &ei); numa_emu_dist = true; - return 0; + return true; } #endif /* CONFIG_NUMA_EMU */ @@ -988,15 +989,13 @@ void __init initmem_init(void) continue; #ifdef CONFIG_NUMA_EMU setup_physnodes(0, max_pfn << PAGE_SHIFT); - if (emu_cmdline && !numa_emulation(i == 0, i == 1)) - return; - - /* not emulating, build identity mapping for numa_add_cpu() */ - for (j = 0; j < ARRAY_SIZE(emu_nid_to_phys); j++) - emu_nid_to_phys[j] = j; - - nodes_clear(node_possible_map); - nodes_clear(node_online_map); + /* + * If requested, try emulation. If emulation is not used, + * build identity emu_nid_to_phys[] for numa_add_cpu() + */ + if (!emu_cmdline || !numa_emulation(i == 0, i == 1)) + for (j = 0; j < ARRAY_SIZE(emu_nid_to_phys); j++) + emu_nid_to_phys[j] = j; #endif if (numa_register_memblks(&numa_meminfo) < 0) continue; -- cgit v1.2.3-18-g5258 From 775ee85d7bff8ce7c7eccde90eda400658b650a3 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 16 Feb 2011 17:11:10 +0100 Subject: x86-64, NUMA: Wrap node ID during emulation Both emulation layout functions - split_nodes[_size]_interleave() - didn't wrap emulated nid while laying out the fake nodes and tried to avoid interating over the specified number of nodes, which is fragile. Now that the emulation code generates numa_meminfo, the node memblks don't need to be consecutive and emulated node IDs can simply wrap. This makes the code more robust and is necessary for updates to better handle the cases where the physical nodes are interleaved. Signed-off-by: Tejun Heo Cc: Yinghai Lu Cc: Brian Gerst Cc: Cyrill Gorcunov Cc: Shaohui Zheng Cc: David Rientjes Cc: Ingo Molnar Cc: H. Peter Anvin --- arch/x86/mm/numa_64.c | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index 9736204337b..dc9516587cf 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -768,15 +768,7 @@ static int __init split_nodes_interleave(struct numa_meminfo *ei, memblock_x86_hole_size(end, physnodes[i].end) < size) end = physnodes[i].end; - /* - * Avoid allocating more nodes than requested, which can - * happen as a result of rounding down each node's size - * to FAKE_NODE_MIN_SIZE. - */ - if (nodes_weight(physnode_mask) + nid >= nr_nodes) - end = physnodes[i].end; - - ret = emu_setup_memblk(ei, nid++, i, + ret = emu_setup_memblk(ei, nid++ % nr_nodes, i, physnodes[i].start, min(end, physnodes[i].end)); if (ret < 0) @@ -873,7 +865,7 @@ static int __init split_nodes_size_interleave(struct numa_meminfo *ei, memblock_x86_hole_size(end, physnodes[i].end) < size) end = physnodes[i].end; - ret = emu_setup_memblk(ei, nid++, i, + ret = emu_setup_memblk(ei, nid++ % MAX_NUMNODES, i, physnodes[i].start, min(end, physnodes[i].end)); if (ret < 0) -- cgit v1.2.3-18-g5258 From 1cca53407336fb6a86092e36dbc5c1e4d45d912b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 16 Feb 2011 17:11:10 +0100 Subject: x86-64, NUMA: Emulate directly from numa_meminfo NUMA emulation built physnodes[] array which could only represent configurations from the physical meminfo and emulated nodes using the information. There's no reason to take this extra level of indirection. Update emulation functions so that they operate directly on numa_meminfo. This simplifies the code and makes emulation layout behave better with interleaved physical nodes. Signed-off-by: Tejun Heo Cc: Yinghai Lu Cc: Brian Gerst Cc: Cyrill Gorcunov Cc: Shaohui Zheng Cc: David Rientjes Cc: Ingo Molnar Cc: H. Peter Anvin --- arch/x86/mm/numa_64.c | 171 +++++++++++++++++++++----------------------------- 1 file changed, 71 insertions(+), 100 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index dc9516587cf..bd086ebc0ff 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -541,8 +541,6 @@ static int __init numa_register_memblks(struct numa_meminfo *mi) #ifdef CONFIG_NUMA_EMU /* Numa emulation */ -static struct bootnode physnodes[MAX_NUMNODES] __initdata; - static int emu_nid_to_phys[MAX_NUMNODES] __cpuinitdata; static char *emu_cmdline __initdata; @@ -551,6 +549,16 @@ void __init numa_emu_cmdline(char *str) emu_cmdline = str; } +static int __init emu_find_memblk_by_nid(int nid, const struct numa_meminfo *mi) +{ + int i; + + for (i = 0; i < mi->nr_blks; i++) + if (mi->blk[i].nid == nid) + return i; + return -ENOENT; +} + int __init find_node_by_addr(unsigned long addr) { const struct numa_meminfo *mi = &numa_meminfo; @@ -568,63 +576,6 @@ int __init find_node_by_addr(unsigned long addr) return NUMA_NO_NODE; } -static int __init setup_physnodes(unsigned long start, unsigned long end) -{ - const struct numa_meminfo *mi = &numa_meminfo; - int ret = 0; - int i; - - memset(physnodes, 0, sizeof(physnodes)); - - for (i = 0; i < mi->nr_blks; i++) { - int nid = mi->blk[i].nid; - - if (physnodes[nid].start == physnodes[nid].end) { - physnodes[nid].start = mi->blk[i].start; - physnodes[nid].end = mi->blk[i].end; - } else { - physnodes[nid].start = min(physnodes[nid].start, - mi->blk[i].start); - physnodes[nid].end = max(physnodes[nid].end, - mi->blk[i].end); - } - } - - /* - * Basic sanity checking on the physical node map: there may be errors - * if the SRAT or AMD code incorrectly reported the topology or the mem= - * kernel parameter is used. - */ - for (i = 0; i < MAX_NUMNODES; i++) { - if (physnodes[i].start == physnodes[i].end) - continue; - if (physnodes[i].start > end) { - physnodes[i].end = physnodes[i].start; - continue; - } - if (physnodes[i].end < start) { - physnodes[i].start = physnodes[i].end; - continue; - } - if (physnodes[i].start < start) - physnodes[i].start = start; - if (physnodes[i].end > end) - physnodes[i].end = end; - ret++; - } - - /* - * If no physical topology was detected, a single node is faked to cover - * the entire address space. - */ - if (!ret) { - physnodes[ret].start = start; - physnodes[ret].end = end; - ret = 1; - } - return ret; -} - static void __init fake_physnodes(int acpi, int amd, const struct numa_meminfo *ei) { @@ -663,9 +614,11 @@ static void __init fake_physnodes(int acpi, int amd, * something went wrong, 0 otherwise. */ static int __init emu_setup_memblk(struct numa_meminfo *ei, - int nid, int physnid, u64 start, u64 end) + struct numa_meminfo *pi, + int nid, int phys_blk, u64 size) { struct numa_memblk *eb = &ei->blk[ei->nr_blks]; + struct numa_memblk *pb = &pi->blk[phys_blk]; if (ei->nr_blks >= NR_NODE_MEMBLKS) { pr_err("NUMA: Too many emulated memblks, failing emulation\n"); @@ -673,12 +626,18 @@ static int __init emu_setup_memblk(struct numa_meminfo *ei, } ei->nr_blks++; - eb->start = start; - eb->end = end; + eb->start = pb->start; + eb->end = pb->start + size; eb->nid = nid; if (emu_nid_to_phys[nid] == NUMA_NO_NODE) - emu_nid_to_phys[nid] = physnid; + emu_nid_to_phys[nid] = pb->nid; + + pb->start += size; + if (pb->start >= pb->end) { + WARN_ON_ONCE(pb->start > pb->end); + numa_remove_memblk_from(phys_blk, pi); + } printk(KERN_INFO "Faking node %d at %016Lx-%016Lx (%LuMB)\n", nid, eb->start, eb->end, (eb->end - eb->start) >> 20); @@ -690,6 +649,7 @@ static int __init emu_setup_memblk(struct numa_meminfo *ei, * to max_addr. The return value is the number of nodes allocated. */ static int __init split_nodes_interleave(struct numa_meminfo *ei, + struct numa_meminfo *pi, u64 addr, u64 max_addr, int nr_nodes) { nodemask_t physnode_mask = NODE_MASK_NONE; @@ -721,9 +681,8 @@ static int __init split_nodes_interleave(struct numa_meminfo *ei, return -1; } - for (i = 0; i < MAX_NUMNODES; i++) - if (physnodes[i].start != physnodes[i].end) - node_set(i, physnode_mask); + for (i = 0; i < pi->nr_blks; i++) + node_set(pi->blk[i].nid, physnode_mask); /* * Continue to fill physical nodes with fake nodes until there is no @@ -731,8 +690,18 @@ static int __init split_nodes_interleave(struct numa_meminfo *ei, */ while (nodes_weight(physnode_mask)) { for_each_node_mask(i, physnode_mask) { - u64 end = physnodes[i].start + size; u64 dma32_end = PFN_PHYS(MAX_DMA32_PFN); + u64 start, limit, end; + int phys_blk; + + phys_blk = emu_find_memblk_by_nid(i, pi); + if (phys_blk < 0) { + node_clear(i, physnode_mask); + continue; + } + start = pi->blk[phys_blk].start; + limit = pi->blk[phys_blk].end; + end = start + size; if (nid < big) end += FAKE_NODE_MIN_SIZE; @@ -741,11 +710,11 @@ static int __init split_nodes_interleave(struct numa_meminfo *ei, * Continue to add memory to this fake node if its * non-reserved memory is less than the per-node size. */ - while (end - physnodes[i].start - - memblock_x86_hole_size(physnodes[i].start, end) < size) { + while (end - start - + memblock_x86_hole_size(start, end) < size) { end += FAKE_NODE_MIN_SIZE; - if (end > physnodes[i].end) { - end = physnodes[i].end; + if (end > limit) { + end = limit; break; } } @@ -764,19 +733,15 @@ static int __init split_nodes_interleave(struct numa_meminfo *ei, * next node, this one must extend to the end of the * physical node. */ - if (physnodes[i].end - end - - memblock_x86_hole_size(end, physnodes[i].end) < size) - end = physnodes[i].end; + if (limit - end - + memblock_x86_hole_size(end, limit) < size) + end = limit; - ret = emu_setup_memblk(ei, nid++ % nr_nodes, i, - physnodes[i].start, - min(end, physnodes[i].end)); + ret = emu_setup_memblk(ei, pi, nid++ % nr_nodes, + phys_blk, + min(end, limit) - start); if (ret < 0) return ret; - - physnodes[i].start = min(end, physnodes[i].end); - if (physnodes[i].start == physnodes[i].end) - node_clear(i, physnode_mask); } } return 0; @@ -805,6 +770,7 @@ static u64 __init find_end_of_node(u64 start, u64 max_addr, u64 size) * `addr' to `max_addr'. The return value is the number of nodes allocated. */ static int __init split_nodes_size_interleave(struct numa_meminfo *ei, + struct numa_meminfo *pi, u64 addr, u64 max_addr, u64 size) { nodemask_t physnode_mask = NODE_MASK_NONE; @@ -833,9 +799,9 @@ static int __init split_nodes_size_interleave(struct numa_meminfo *ei, } size &= FAKE_NODE_MIN_HASH_MASK; - for (i = 0; i < MAX_NUMNODES; i++) - if (physnodes[i].start != physnodes[i].end) - node_set(i, physnode_mask); + for (i = 0; i < pi->nr_blks; i++) + node_set(pi->blk[i].nid, physnode_mask); + /* * Fill physical nodes with fake nodes of size until there is no memory * left on any of them. @@ -843,10 +809,18 @@ static int __init split_nodes_size_interleave(struct numa_meminfo *ei, while (nodes_weight(physnode_mask)) { for_each_node_mask(i, physnode_mask) { u64 dma32_end = MAX_DMA32_PFN << PAGE_SHIFT; - u64 end; + u64 start, limit, end; + int phys_blk; - end = find_end_of_node(physnodes[i].start, - physnodes[i].end, size); + phys_blk = emu_find_memblk_by_nid(i, pi); + if (phys_blk < 0) { + node_clear(i, physnode_mask); + continue; + } + start = pi->blk[phys_blk].start; + limit = pi->blk[phys_blk].end; + + end = find_end_of_node(start, limit, size); /* * If there won't be at least FAKE_NODE_MIN_SIZE of * non-reserved memory in ZONE_DMA32 for the next node, @@ -861,19 +835,15 @@ static int __init split_nodes_size_interleave(struct numa_meminfo *ei, * next node, this one must extend to the end of the * physical node. */ - if (physnodes[i].end - end - - memblock_x86_hole_size(end, physnodes[i].end) < size) - end = physnodes[i].end; + if (limit - end - + memblock_x86_hole_size(end, limit) < size) + end = limit; - ret = emu_setup_memblk(ei, nid++ % MAX_NUMNODES, i, - physnodes[i].start, - min(end, physnodes[i].end)); + ret = emu_setup_memblk(ei, pi, nid++ % MAX_NUMNODES, + phys_blk, + min(end, limit) - start); if (ret < 0) return ret; - - physnodes[i].start = min(end, physnodes[i].end); - if (physnodes[i].start == physnodes[i].end) - node_clear(i, physnode_mask); } } return 0; @@ -886,10 +856,12 @@ static int __init split_nodes_size_interleave(struct numa_meminfo *ei, static bool __init numa_emulation(int acpi, int amd) { static struct numa_meminfo ei __initdata; + static struct numa_meminfo pi __initdata; const u64 max_addr = max_pfn << PAGE_SHIFT; int i, ret; memset(&ei, 0, sizeof(ei)); + pi = numa_meminfo; for (i = 0; i < MAX_NUMNODES; i++) emu_nid_to_phys[i] = NUMA_NO_NODE; @@ -903,12 +875,12 @@ static bool __init numa_emulation(int acpi, int amd) u64 size; size = memparse(emu_cmdline, &emu_cmdline); - ret = split_nodes_size_interleave(&ei, 0, max_addr, size); + ret = split_nodes_size_interleave(&ei, &pi, 0, max_addr, size); } else { unsigned long n; n = simple_strtoul(emu_cmdline, NULL, 0); - ret = split_nodes_interleave(&ei, 0, max_addr, n); + ret = split_nodes_interleave(&ei, &pi, 0, max_addr, n); } if (ret < 0) @@ -980,7 +952,6 @@ void __init initmem_init(void) if (numa_cleanup_meminfo(&numa_meminfo) < 0) continue; #ifdef CONFIG_NUMA_EMU - setup_physnodes(0, max_pfn << PAGE_SHIFT); /* * If requested, try emulation. If emulation is not used, * build identity emu_nid_to_phys[] for numa_add_cpu() -- cgit v1.2.3-18-g5258 From 6b78cb549b4105cbf7c6f7461f27a21f00c44997 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 16 Feb 2011 17:11:10 +0100 Subject: x86-64, NUMA: Unify emulated apicid -> node mapping transformation NUMA emulation changes node mappings and thus apicid -> node mapping needs to be updated accordingly. srat_64 and amdtopology_64 did this separately; however, all the necessary information is the mapping from emulated nodes to physical nodes which is available in emu_nid_to_phys[]. Implement common __apicid_to_node[] transformation in numa_emulation() and drop duplicate implementations. Signed-off-by: Tejun Heo Cc: Yinghai Lu Cc: Brian Gerst Cc: Cyrill Gorcunov Cc: Shaohui Zheng Cc: David Rientjes Cc: Ingo Molnar Cc: H. Peter Anvin --- arch/x86/mm/amdtopology_64.c | 9 --------- arch/x86/mm/numa_64.c | 16 +++++++++++++++- arch/x86/mm/srat_64.c | 24 +----------------------- 3 files changed, 16 insertions(+), 33 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/amdtopology_64.c b/arch/x86/mm/amdtopology_64.c index fd7b609025b..f37ea2fe85e 100644 --- a/arch/x86/mm/amdtopology_64.c +++ b/arch/x86/mm/amdtopology_64.c @@ -196,10 +196,6 @@ int __init amd_numa_init(void) } #ifdef CONFIG_NUMA_EMU -static s16 fake_apicid_to_node[MAX_LOCAL_APIC] __initdata = { - [0 ... MAX_LOCAL_APIC-1] = NUMA_NO_NODE -}; - /* * For NUMA emulation, fake proximity domain (_PXM) to node id mappings must be * setup to represent the physical topology but reflect the emulated @@ -224,20 +220,15 @@ void __init amd_fake_nodes(const struct bootnode *nodes, int nr_nodes) for (i = 0; i < nr_nodes; i++) { int index; int nid; - int j; nid = find_node_by_addr(nodes[i].start); if (nid == NUMA_NO_NODE) continue; index = nodeids[nid] << bits; - if (fake_apicid_to_node[index + apicid_base] == NUMA_NO_NODE) - for (j = apicid_base; j < cores + apicid_base; j++) - fake_apicid_to_node[index + j] = i; #ifdef CONFIG_ACPI_NUMA __acpi_map_pxm_to_node(nid, i); #endif } - memcpy(__apicid_to_node, fake_apicid_to_node, sizeof(__apicid_to_node)); } #endif /* CONFIG_NUMA_EMU */ diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index bd086ebc0ff..722039e0948 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -858,7 +858,7 @@ static bool __init numa_emulation(int acpi, int amd) static struct numa_meminfo ei __initdata; static struct numa_meminfo pi __initdata; const u64 max_addr = max_pfn << PAGE_SHIFT; - int i, ret; + int i, j, ret; memset(&ei, 0, sizeof(ei)); pi = numa_meminfo; @@ -894,6 +894,20 @@ static bool __init numa_emulation(int acpi, int amd) /* commit */ numa_meminfo = ei; + /* + * Transform __apicid_to_node table to use emulated nids by + * reverse-mapping phys_nid. The maps should always exist but fall + * back to zero just in case. + */ + for (i = 0; i < ARRAY_SIZE(__apicid_to_node); i++) { + if (__apicid_to_node[i] == NUMA_NO_NODE) + continue; + for (j = 0; j < ARRAY_SIZE(emu_nid_to_phys); j++) + if (__apicid_to_node[i] == emu_nid_to_phys[j]) + break; + __apicid_to_node[i] = j < ARRAY_SIZE(emu_nid_to_phys) ? j : 0; + } + /* make sure all emulated nodes are mapped to a physical node */ for (i = 0; i < ARRAY_SIZE(emu_nid_to_phys); i++) if (emu_nid_to_phys[i] == NUMA_NO_NODE) diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index d2f53f35d86..d4fbfea5354 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -265,9 +265,6 @@ int __init x86_acpi_numa_init(void) static int fake_node_to_pxm_map[MAX_NUMNODES] __initdata = { [0 ... MAX_NUMNODES-1] = PXM_INVAL }; -static s16 fake_apicid_to_node[MAX_LOCAL_APIC] __initdata = { - [0 ... MAX_LOCAL_APIC-1] = NUMA_NO_NODE -}; /* * In NUMA emulation, we need to setup proximity domain (_PXM) to node ID @@ -279,7 +276,7 @@ static s16 fake_apicid_to_node[MAX_LOCAL_APIC] __initdata = { */ void __init acpi_fake_nodes(const struct bootnode *fake_nodes, int num_nodes) { - int i, j; + int i; for (i = 0; i < num_nodes; i++) { int nid, pxm; @@ -291,29 +288,10 @@ void __init acpi_fake_nodes(const struct bootnode *fake_nodes, int num_nodes) if (pxm == PXM_INVAL) continue; fake_node_to_pxm_map[i] = pxm; - /* - * For each apicid_to_node mapping that exists for this real - * node, it must now point to the fake node ID. - */ - for (j = 0; j < MAX_LOCAL_APIC; j++) - if (__apicid_to_node[j] == nid && - fake_apicid_to_node[j] == NUMA_NO_NODE) - fake_apicid_to_node[j] = i; } - /* - * If there are apicid-to-node mappings for physical nodes that do not - * have a corresponding emulated node, it should default to a guaranteed - * value. - */ - for (i = 0; i < MAX_LOCAL_APIC; i++) - if (__apicid_to_node[i] != NUMA_NO_NODE && - fake_apicid_to_node[i] == NUMA_NO_NODE) - fake_apicid_to_node[i] = 0; - for (i = 0; i < num_nodes; i++) __acpi_map_pxm_to_node(fake_node_to_pxm_map[i], i); - memcpy(__apicid_to_node, fake_apicid_to_node, sizeof(__apicid_to_node)); for (i = 0; i < num_nodes; i++) if (fake_nodes[i].start != fake_nodes[i].end) -- cgit v1.2.3-18-g5258 From e23bba604433a202cd301a976454a90ea6b783ef Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 16 Feb 2011 17:11:10 +0100 Subject: x86-64, NUMA: Unify emulated distance mapping NUMA emulation needs to update node distance information. It did it by remapping apicid to PXM mapping, even when amdtopology is being used. There is no reason to go through such convolution. The generic code has all the information necessary to transform the distance table to the emulated nid space. Implement generic distance table transformation in numa_emulation() and drop private implementations in srat_64 and amdtopology_64. This makes find_node_by_addr() and fake_physnodes() and related functions unnecessary, drop them. Signed-off-by: Tejun Heo Cc: Yinghai Lu Cc: Brian Gerst Cc: Cyrill Gorcunov Cc: Shaohui Zheng Cc: David Rientjes Cc: Ingo Molnar Cc: H. Peter Anvin --- arch/x86/include/asm/acpi.h | 6 --- arch/x86/include/asm/amd_nb.h | 4 -- arch/x86/include/asm/numa_64.h | 1 - arch/x86/mm/amdtopology_64.c | 38 --------------- arch/x86/mm/numa_64.c | 102 ++++++++++++++++------------------------- arch/x86/mm/srat_64.c | 65 -------------------------- 6 files changed, 40 insertions(+), 176 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h index 9c9fe1b0bc4..a37da6df07f 100644 --- a/arch/x86/include/asm/acpi.h +++ b/arch/x86/include/asm/acpi.h @@ -186,12 +186,6 @@ struct bootnode; #ifdef CONFIG_ACPI_NUMA extern int acpi_numa; extern int x86_acpi_numa_init(void); - -#ifdef CONFIG_NUMA_EMU -extern void acpi_fake_nodes(const struct bootnode *fake_nodes, - int num_nodes); -extern int acpi_emu_node_distance(int a, int b); -#endif #endif /* CONFIG_ACPI_NUMA */ #define acpi_unlazy_tlb(x) leave_mm(x) diff --git a/arch/x86/include/asm/amd_nb.h b/arch/x86/include/asm/amd_nb.h index 384d1188e78..e264ae5a144 100644 --- a/arch/x86/include/asm/amd_nb.h +++ b/arch/x86/include/asm/amd_nb.h @@ -20,10 +20,6 @@ extern int amd_numa_init(void); extern int amd_get_subcaches(int); extern int amd_set_subcaches(int, int); -#ifdef CONFIG_NUMA_EMU -extern void amd_fake_nodes(const struct bootnode *nodes, int nr_nodes); -#endif - struct amd_northbridge { struct pci_dev *misc; struct pci_dev *link; diff --git a/arch/x86/include/asm/numa_64.h b/arch/x86/include/asm/numa_64.h index 5361c594798..344eb1790b4 100644 --- a/arch/x86/include/asm/numa_64.h +++ b/arch/x86/include/asm/numa_64.h @@ -34,7 +34,6 @@ extern void __init numa_set_distance(int from, int to, int distance); #define FAKE_NODE_MIN_SIZE ((u64)32 << 20) #define FAKE_NODE_MIN_HASH_MASK (~(FAKE_NODE_MIN_SIZE - 1UL)) void numa_emu_cmdline(char *); -int __init find_node_by_addr(unsigned long addr); #endif /* CONFIG_NUMA_EMU */ #else static inline int numa_cpu_node(int cpu) { return NUMA_NO_NODE; } diff --git a/arch/x86/mm/amdtopology_64.c b/arch/x86/mm/amdtopology_64.c index f37ea2fe85e..0919c26820d 100644 --- a/arch/x86/mm/amdtopology_64.c +++ b/arch/x86/mm/amdtopology_64.c @@ -194,41 +194,3 @@ int __init amd_numa_init(void) return 0; } - -#ifdef CONFIG_NUMA_EMU -/* - * For NUMA emulation, fake proximity domain (_PXM) to node id mappings must be - * setup to represent the physical topology but reflect the emulated - * environment. For each emulated node, the real node which it appears on is - * found and a fake pxm to nid mapping is created which mirrors the actual - * locality. node_distance() then represents the correct distances between - * emulated nodes by using the fake acpi mappings to pxms. - */ -void __init amd_fake_nodes(const struct bootnode *nodes, int nr_nodes) -{ - unsigned int bits; - unsigned int cores; - unsigned int apicid_base = 0; - int i; - - bits = boot_cpu_data.x86_coreid_bits; - cores = 1 << bits; - early_get_boot_cpu_id(); - if (boot_cpu_physical_apicid > 0) - apicid_base = boot_cpu_physical_apicid; - - for (i = 0; i < nr_nodes; i++) { - int index; - int nid; - - nid = find_node_by_addr(nodes[i].start); - if (nid == NUMA_NO_NODE) - continue; - - index = nodeids[nid] << bits; -#ifdef CONFIG_ACPI_NUMA - __acpi_map_pxm_to_node(nid, i); -#endif - } -} -#endif /* CONFIG_NUMA_EMU */ diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index 722039e0948..8ce61773590 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -48,10 +48,6 @@ static struct numa_meminfo numa_meminfo __initdata; static int numa_distance_cnt; static u8 *numa_distance; -#ifdef CONFIG_NUMA_EMU -static bool numa_emu_dist; -#endif - /* * Given a shift value, try to populate memnodemap[] * Returns : @@ -443,10 +439,6 @@ void __init numa_set_distance(int from, int to, int distance) int __node_distance(int from, int to) { -#if defined(CONFIG_ACPI_NUMA) && defined(CONFIG_NUMA_EMU) - if (numa_emu_dist) - return acpi_emu_node_distance(from, to); -#endif if (from >= numa_distance_cnt || to >= numa_distance_cnt) return from == to ? LOCAL_DISTANCE : REMOTE_DISTANCE; return numa_distance[from * numa_distance_cnt + to]; @@ -559,56 +551,6 @@ static int __init emu_find_memblk_by_nid(int nid, const struct numa_meminfo *mi) return -ENOENT; } -int __init find_node_by_addr(unsigned long addr) -{ - const struct numa_meminfo *mi = &numa_meminfo; - int i; - - for (i = 0; i < mi->nr_blks; i++) { - /* - * Find the real node that this emulated node appears on. For - * the sake of simplicity, we only use a real node's starting - * address to determine which emulated node it appears on. - */ - if (addr >= mi->blk[i].start && addr < mi->blk[i].end) - return mi->blk[i].nid; - } - return NUMA_NO_NODE; -} - -static void __init fake_physnodes(int acpi, int amd, - const struct numa_meminfo *ei) -{ - static struct bootnode nodes[MAX_NUMNODES] __initdata; - int i, nr_nodes = 0; - - for (i = 0; i < ei->nr_blks; i++) { - int nid = ei->blk[i].nid; - - if (nodes[nid].start == nodes[nid].end) { - nodes[nid].start = ei->blk[i].start; - nodes[nid].end = ei->blk[i].end; - nr_nodes++; - } else { - nodes[nid].start = min(ei->blk[i].start, nodes[nid].start); - nodes[nid].end = max(ei->blk[i].end, nodes[nid].end); - } - } - - BUG_ON(acpi && amd); -#ifdef CONFIG_ACPI_NUMA - if (acpi) - acpi_fake_nodes(nodes, nr_nodes); -#endif -#ifdef CONFIG_AMD_NUMA - if (amd) - amd_fake_nodes(nodes, nr_nodes); -#endif - if (!acpi && !amd) - for (i = 0; i < nr_cpu_ids; i++) - numa_set_node(i, 0); -} - /* * Sets up nid to range from @start to @end. The return value is -errno if * something went wrong, 0 otherwise. @@ -853,11 +795,13 @@ static int __init split_nodes_size_interleave(struct numa_meminfo *ei, * Sets up the system RAM area from start_pfn to last_pfn according to the * numa=fake command-line option. */ -static bool __init numa_emulation(int acpi, int amd) +static bool __init numa_emulation(void) { static struct numa_meminfo ei __initdata; static struct numa_meminfo pi __initdata; const u64 max_addr = max_pfn << PAGE_SHIFT; + int phys_dist_cnt = numa_distance_cnt; + u8 *phys_dist = NULL; int i, j, ret; memset(&ei, 0, sizeof(ei)); @@ -891,6 +835,25 @@ static bool __init numa_emulation(int acpi, int amd) return false; } + /* + * Copy the original distance table. It's temporary so no need to + * reserve it. + */ + if (phys_dist_cnt) { + size_t size = phys_dist_cnt * sizeof(numa_distance[0]); + u64 phys; + + phys = memblock_find_in_range(0, + (u64)max_pfn_mapped << PAGE_SHIFT, + size, PAGE_SIZE); + if (phys == MEMBLOCK_ERROR) { + pr_warning("NUMA: Warning: can't allocate copy of distance table, disabling emulation\n"); + return false; + } + phys_dist = __va(phys); + memcpy(phys_dist, numa_distance, size); + } + /* commit */ numa_meminfo = ei; @@ -913,8 +876,23 @@ static bool __init numa_emulation(int acpi, int amd) if (emu_nid_to_phys[i] == NUMA_NO_NODE) emu_nid_to_phys[i] = 0; - fake_physnodes(acpi, amd, &ei); - numa_emu_dist = true; + /* transform distance table */ + numa_reset_distance(); + for (i = 0; i < MAX_NUMNODES; i++) { + for (j = 0; j < MAX_NUMNODES; j++) { + int physi = emu_nid_to_phys[i]; + int physj = emu_nid_to_phys[j]; + int dist; + + if (physi >= phys_dist_cnt || physj >= phys_dist_cnt) + dist = physi == physj ? + LOCAL_DISTANCE : REMOTE_DISTANCE; + else + dist = phys_dist[physi * phys_dist_cnt + physj]; + + numa_set_distance(i, j, dist); + } + } return true; } #endif /* CONFIG_NUMA_EMU */ @@ -970,7 +948,7 @@ void __init initmem_init(void) * If requested, try emulation. If emulation is not used, * build identity emu_nid_to_phys[] for numa_add_cpu() */ - if (!emu_cmdline || !numa_emulation(i == 0, i == 1)) + if (!emu_cmdline || !numa_emulation()) for (j = 0; j < ARRAY_SIZE(emu_nid_to_phys); j++) emu_nid_to_phys[j] = j; #endif diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index d4fbfea5354..8e9d3394f6d 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -26,8 +26,6 @@ int acpi_numa __initdata; -static struct acpi_table_slit *acpi_slit; - static struct bootnode nodes_add[MAX_NUMNODES]; static __init int setup_node(int pxm) @@ -51,25 +49,11 @@ static __init inline int srat_disabled(void) void __init acpi_numa_slit_init(struct acpi_table_slit *slit) { int i, j; - unsigned length; - unsigned long phys; for (i = 0; i < slit->locality_count; i++) for (j = 0; j < slit->locality_count; j++) numa_set_distance(pxm_to_node(i), pxm_to_node(j), slit->entry[slit->locality_count * i + j]); - - /* acpi_slit is used only by emulation */ - length = slit->header.length; - phys = memblock_find_in_range(0, max_pfn_mapped< x2APIC mapping */ @@ -261,55 +245,6 @@ int __init x86_acpi_numa_init(void) return srat_disabled() ? -EINVAL : 0; } -#ifdef CONFIG_NUMA_EMU -static int fake_node_to_pxm_map[MAX_NUMNODES] __initdata = { - [0 ... MAX_NUMNODES-1] = PXM_INVAL -}; - -/* - * In NUMA emulation, we need to setup proximity domain (_PXM) to node ID - * mappings that respect the real ACPI topology but reflect our emulated - * environment. For each emulated node, we find which real node it appears on - * and create PXM to NID mappings for those fake nodes which mirror that - * locality. SLIT will now represent the correct distances between emulated - * nodes as a result of the real topology. - */ -void __init acpi_fake_nodes(const struct bootnode *fake_nodes, int num_nodes) -{ - int i; - - for (i = 0; i < num_nodes; i++) { - int nid, pxm; - - nid = find_node_by_addr(fake_nodes[i].start); - if (nid == NUMA_NO_NODE) - continue; - pxm = node_to_pxm(nid); - if (pxm == PXM_INVAL) - continue; - fake_node_to_pxm_map[i] = pxm; - } - - for (i = 0; i < num_nodes; i++) - __acpi_map_pxm_to_node(fake_node_to_pxm_map[i], i); - - for (i = 0; i < num_nodes; i++) - if (fake_nodes[i].start != fake_nodes[i].end) - node_set(i, numa_nodes_parsed); -} - -int acpi_emu_node_distance(int a, int b) -{ - int index; - - if (!acpi_slit) - return node_to_pxm(a) == node_to_pxm(b) ? - LOCAL_DISTANCE : REMOTE_DISTANCE; - index = acpi_slit->locality_count * node_to_pxm(a); - return acpi_slit->entry[index + node_to_pxm(b)]; -} -#endif /* CONFIG_NUMA_EMU */ - #if defined(CONFIG_MEMORY_HOTPLUG_SPARSE) || defined(CONFIG_ACPI_HOTPLUG_MEMORY) int memory_add_physaddr_to_nid(u64 start) { -- cgit v1.2.3-18-g5258 From 4bd7be22f4b25fc87e236a29da3a625621699074 Mon Sep 17 00:00:00 2001 From: Hemant Pedanekar Date: Wed, 16 Feb 2011 08:31:39 -0800 Subject: TI816X: Update common omap platform files This patch updates the common platform files with TI816X support. The approach taken in this patch is to add TI816X as part of OMAP3 variant where the cpu class is considered as OMAP34XX and the type is TI816X. This means, both cpu_is_omap34xx() and cpu_is_ti816x() checks return success on TI816X. A kernel config option CONFIG_SOC_OMAPTI816X is added under OMAP3 to include support for TI816X build. Signed-off-by: Hemant Pedanekar Reviewed-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 5 +++++ arch/arm/plat-omap/include/plat/clkdev_omap.h | 1 + arch/arm/plat-omap/include/plat/clock.h | 1 + arch/arm/plat-omap/include/plat/common.h | 1 + arch/arm/plat-omap/include/plat/cpu.h | 18 ++++++++++++++++++ 5 files changed, 26 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 1a2cf6226a5..23548b60bb1 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -72,6 +72,11 @@ config ARCH_OMAP3430 default y select ARCH_OMAP_OTG +config SOC_OMAPTI816X + bool "TI816X support" + depends on ARCH_OMAP3 + default y + config OMAP_PACKAGE_ZAF bool diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h index 256ab3f1ec8..f1899a3e417 100644 --- a/arch/arm/plat-omap/include/plat/clkdev_omap.h +++ b/arch/arm/plat-omap/include/plat/clkdev_omap.h @@ -38,6 +38,7 @@ struct omap_clk { #define CK_3517 (1 << 9) #define CK_36XX (1 << 10) /* 36xx/37xx-specific clocks */ #define CK_443X (1 << 11) +#define CK_TI816X (1 << 12) #define CK_34XX (CK_3430ES1 | CK_3430ES2PLUS) diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h index 8eb0adab19e..d43e6234dbb 100644 --- a/arch/arm/plat-omap/include/plat/clock.h +++ b/arch/arm/plat-omap/include/plat/clock.h @@ -53,6 +53,7 @@ struct clkops { #define RATE_IN_3430ES2PLUS (1 << 3) /* 3430 ES >= 2 rates only */ #define RATE_IN_36XX (1 << 4) #define RATE_IN_4430 (1 << 5) +#define RATE_IN_TI816X (1 << 6) #define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X) #define RATE_IN_34XX (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS) diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h index 29b2afb4288..1dd97e7461c 100644 --- a/arch/arm/plat-omap/include/plat/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -66,6 +66,7 @@ void omap2_set_globals_242x(void); void omap2_set_globals_243x(void); void omap2_set_globals_3xxx(void); void omap2_set_globals_443x(void); +void omap2_set_globals_ti816x(void); /* These get called from omap2_set_globals_xxxx(), do not call these */ void omap2_set_globals_tap(struct omap_globals *); diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 3fd8b405572..ac7dcd9a80c 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -105,6 +105,12 @@ static inline int is_omap ##subclass (void) \ return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ } +#define IS_TI_SUBCLASS(subclass, id) \ +static inline int is_ti ##subclass (void) \ +{ \ + return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ +} + IS_OMAP_CLASS(7xx, 0x07) IS_OMAP_CLASS(15xx, 0x15) IS_OMAP_CLASS(16xx, 0x16) @@ -118,6 +124,8 @@ IS_OMAP_SUBCLASS(343x, 0x343) IS_OMAP_SUBCLASS(363x, 0x363) IS_OMAP_SUBCLASS(443x, 0x443) +IS_TI_SUBCLASS(816x, 0x816) + #define cpu_is_omap7xx() 0 #define cpu_is_omap15xx() 0 #define cpu_is_omap16xx() 0 @@ -126,6 +134,7 @@ IS_OMAP_SUBCLASS(443x, 0x443) #define cpu_is_omap243x() 0 #define cpu_is_omap34xx() 0 #define cpu_is_omap343x() 0 +#define cpu_is_ti816x() 0 #define cpu_is_omap44xx() 0 #define cpu_is_omap443x() 0 @@ -330,6 +339,7 @@ IS_OMAP_TYPE(3517, 0x3517) # undef cpu_is_omap3530 # undef cpu_is_omap3505 # undef cpu_is_omap3517 +# undef cpu_is_ti816x # define cpu_is_omap3430() is_omap3430() # define cpu_is_omap3503() (cpu_is_omap3430() && \ (!omap3_has_iva()) && \ @@ -345,6 +355,7 @@ IS_OMAP_TYPE(3517, 0x3517) # define cpu_is_omap3517() is_omap3517() # undef cpu_is_omap3630 # define cpu_is_omap3630() is_omap363x() +# define cpu_is_ti816x() is_ti816x() #endif # if defined(CONFIG_ARCH_OMAP4) @@ -389,6 +400,10 @@ IS_OMAP_TYPE(3517, 0x3517) #define OMAP3505_REV(v) (OMAP35XX_CLASS | (0x3505 << 16) | (v << 8)) #define OMAP3517_REV(v) (OMAP35XX_CLASS | (0x3517 << 16) | (v << 8)) +#define TI816X_CLASS 0x81600034 +#define TI8168_REV_ES1_0 TI816X_CLASS +#define TI8168_REV_ES1_1 (TI816X_CLASS | (OMAP_REVBITS_01 << 8)) + #define OMAP443X_CLASS 0x44300044 #define OMAP4430_REV_ES1_0 OMAP443X_CLASS #define OMAP4430_REV_ES2_0 0x44301044 @@ -419,6 +434,7 @@ IS_OMAP_TYPE(3517, 0x3517) #define CHIP_IS_OMAP3630ES1_1 (1 << 9) #define CHIP_IS_OMAP3630ES1_2 (1 << 10) #define CHIP_IS_OMAP4430ES2 (1 << 11) +#define CHIP_IS_TI816X (1 << 14) #define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430) @@ -455,6 +471,7 @@ extern u32 omap3_features; #define OMAP3_HAS_ISP BIT(4) #define OMAP3_HAS_192MHZ_CLK BIT(5) #define OMAP3_HAS_IO_WAKEUP BIT(6) +#define OMAP3_HAS_SDRC BIT(7) #define OMAP3_HAS_FEATURE(feat,flag) \ static inline unsigned int omap3_has_ ##feat(void) \ @@ -469,5 +486,6 @@ OMAP3_HAS_FEATURE(neon, NEON) OMAP3_HAS_FEATURE(isp, ISP) OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK) OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP) +OMAP3_HAS_FEATURE(sdrc, SDRC) #endif -- cgit v1.2.3-18-g5258 From 01001712c96f82e6317b1e09729d8fc4bcc66957 Mon Sep 17 00:00:00 2001 From: Hemant Pedanekar Date: Wed, 16 Feb 2011 08:31:39 -0800 Subject: TI816X: Update common OMAP machine specific sources This patch updates the common machine specific source files with support for TI816X. Signed-off-by: Hemant Pedanekar Reviewed-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/clock3xxx_data.c | 5 +++- arch/arm/mach-omap2/common.c | 21 ++++++++++++++++ arch/arm/mach-omap2/control.h | 6 +++++ arch/arm/mach-omap2/id.c | 33 ++++++++++++++++++++++++-- arch/arm/mach-omap2/include/mach/entry-macro.S | 13 ++++++++++ arch/arm/mach-omap2/io.c | 22 ++++++++++++++++- arch/arm/mach-omap2/irq.c | 5 +++- arch/arm/mach-omap2/serial.c | 8 +++---- arch/arm/plat-omap/include/plat/hardware.h | 1 + arch/arm/plat-omap/include/plat/io.h | 8 +++++++ arch/arm/plat-omap/include/plat/ti816x.h | 27 +++++++++++++++++++++ arch/arm/plat-omap/io.c | 5 +++- 12 files changed, 144 insertions(+), 10 deletions(-) create mode 100644 arch/arm/plat-omap/include/plat/ti816x.h (limited to 'arch') diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 403a4a1d3f9..f14d986f0b5 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3471,6 +3471,9 @@ int __init omap3xxx_clk_init(void) } else if (cpu_is_omap3630()) { cpu_mask = (RATE_IN_34XX | RATE_IN_36XX); cpu_clkflg = CK_36XX; + } else if (cpu_is_ti816x()) { + cpu_mask = RATE_IN_TI816X; + cpu_clkflg = CK_TI816X; } else if (cpu_is_omap34xx()) { if (omap_rev() == OMAP3430_REV_ES1_0) { cpu_mask = RATE_IN_3430ES1; @@ -3550,7 +3553,7 @@ int __init omap3xxx_clk_init(void) /* * Lock DPLL5 and put it in autoidle. */ - if (omap_rev() >= OMAP3430_REV_ES2_0) + if (!cpu_is_ti816x() && (omap_rev() >= OMAP3430_REV_ES2_0)) omap3_clk_lock_dpll5(); /* Avoid sleeping during omap3_core_dpll_m2_set_rate() */ diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c index 778929f7e92..79fb948f814 100644 --- a/arch/arm/mach-omap2/common.c +++ b/arch/arm/mach-omap2/common.c @@ -108,6 +108,27 @@ void __init omap3_map_io(void) omap2_set_globals_3xxx(); omap34xx_map_common_io(); } + +/* + * Adjust TAP register base such that omap3_check_revision accesses the correct + * TI816X register for checking device ID (it adds 0x204 to tap base while + * TI816X DEVICE ID register is at offset 0x600 from control base). + */ +#define TI816X_TAP_BASE (TI816X_CTRL_BASE + \ + TI816X_CONTROL_DEVICE_ID - 0x204) + +static struct omap_globals ti816x_globals = { + .class = OMAP343X_CLASS, + .tap = OMAP2_L4_IO_ADDRESS(TI816X_TAP_BASE), + .ctrl = TI816X_CTRL_BASE, + .prm = TI816X_PRCM_BASE, + .cm = TI816X_PRCM_BASE, +}; + +void __init omap2_set_globals_ti816x(void) +{ + __omap2_set_globals(&ti816x_globals); +} #endif #if defined(CONFIG_ARCH_OMAP4) diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index f0629ae0410..c2804c1c4ef 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -52,6 +52,9 @@ #define OMAP343X_CONTROL_PADCONFS_WKUP 0xa00 #define OMAP343X_CONTROL_GENERAL_WKUP 0xa60 +/* TI816X spefic control submodules */ +#define TI816X_CONTROL_DEVCONF 0x600 + /* Control register offsets - read/write with omap_ctrl_{read,write}{bwl}() */ #define OMAP2_CONTROL_SYSCONFIG (OMAP2_CONTROL_INTERFACE + 0x10) @@ -241,6 +244,9 @@ #define OMAP3_PADCONF_SAD2D_MSTANDBY 0x250 #define OMAP3_PADCONF_SAD2D_IDLEACK 0x254 +/* TI816X CONTROL_DEVCONF register offsets */ +#define TI816X_CONTROL_DEVICE_ID (TI816X_CONTROL_DEVCONF + 0x000) + /* * REVISIT: This list of registers is not comprehensive - there are more * that should be added. diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 5f9086c65e4..5c25f1b5523 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -191,12 +191,19 @@ static void __init omap3_check_features(void) if (!cpu_is_omap3505() && !cpu_is_omap3517()) omap3_features |= OMAP3_HAS_IO_WAKEUP; + omap3_features |= OMAP3_HAS_SDRC; + /* * TODO: Get additional info (where applicable) * e.g. Size of L2 cache. */ } +static void __init ti816x_check_features(void) +{ + omap3_features = OMAP3_HAS_NEON; +} + static void __init omap3_check_revision(void) { u32 cpuid, idcode; @@ -287,6 +294,20 @@ static void __init omap3_check_revision(void) omap_chip.oc |= CHIP_IS_OMAP3630ES1_2; } break; + case 0xb81e: + omap_chip.oc = CHIP_IS_TI816X; + + switch (rev) { + case 0: + omap_revision = TI8168_REV_ES1_0; + break; + case 1: + omap_revision = TI8168_REV_ES1_1; + break; + default: + omap_revision = TI8168_REV_ES1_1; + } + break; default: /* Unknown default to latest silicon rev as default*/ omap_revision = OMAP3630_REV_ES1_2; @@ -372,6 +393,8 @@ static void __init omap3_cpuinfo(void) /* Already set in omap3_check_revision() */ strcpy(cpu_name, "AM3505"); } + } else if (cpu_is_ti816x()) { + strcpy(cpu_name, "TI816X"); } else if (omap3_has_iva() && omap3_has_sgx()) { /* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */ strcpy(cpu_name, "OMAP3430/3530"); @@ -386,7 +409,7 @@ static void __init omap3_cpuinfo(void) strcpy(cpu_name, "OMAP3503"); } - if (cpu_is_omap3630()) { + if (cpu_is_omap3630() || cpu_is_ti816x()) { switch (rev) { case OMAP_REVBITS_00: strcpy(cpu_rev, "1.0"); @@ -462,7 +485,13 @@ void __init omap2_check_revision(void) omap24xx_check_revision(); } else if (cpu_is_omap34xx()) { omap3_check_revision(); - omap3_check_features(); + + /* TI816X doesn't have feature register */ + if (!cpu_is_ti816x()) + omap3_check_features(); + else + ti816x_check_features(); + omap3_cpuinfo(); return; } else if (cpu_is_omap44xx()) { diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S index 81985a665cb..a48690b9099 100644 --- a/arch/arm/mach-omap2/include/mach/entry-macro.S +++ b/arch/arm/mach-omap2/include/mach/entry-macro.S @@ -61,6 +61,14 @@ bne 9998f ldr \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */ cmp \irqnr, #0x0 + bne 9998f + + /* + * ti816x has additional IRQ pending register. Checking this + * register on omap2 & omap3 has no effect (read as 0). + */ + ldr \irqnr, [\base, #0xf8] /* IRQ pending reg 4 */ + cmp \irqnr, #0x0 9998: ldrne \irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET] and \irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */ @@ -133,6 +141,11 @@ bne 9999f ldr \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */ cmp \irqnr, #0x0 +#ifdef CONFIG_SOC_OMAPTI816X + bne 9999f + ldr \irqnr, [\base, #0xf8] /* IRQ pending reg 4 */ + cmp \irqnr, #0x0 +#endif 9999: ldrne \irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET] and \irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */ diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 26a61cf2729..f992a81c393 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -175,6 +175,18 @@ static struct map_desc omap34xx_io_desc[] __initdata = { #endif }; #endif + +#ifdef CONFIG_SOC_OMAPTI816X +static struct map_desc omapti816x_io_desc[] __initdata = { + { + .virtual = L4_34XX_VIRT, + .pfn = __phys_to_pfn(L4_34XX_PHYS), + .length = L4_34XX_SIZE, + .type = MT_DEVICE + }, +}; +#endif + #ifdef CONFIG_ARCH_OMAP4 static struct map_desc omap44xx_io_desc[] __initdata = { { @@ -267,6 +279,14 @@ void __init omap34xx_map_common_io(void) } #endif +#ifdef CONFIG_SOC_OMAPTI816X +void __init omapti816x_map_common_io(void) +{ + iotable_init(omapti816x_io_desc, ARRAY_SIZE(omapti816x_io_desc)); + _omap2_map_common_io(); +} +#endif + #ifdef CONFIG_ARCH_OMAP4 void __init omap44xx_map_common_io(void) { @@ -398,7 +418,7 @@ void __init omap2_init_common_infrastructure(void) void __init omap2_init_common_devices(struct omap_sdrc_params *sdrc_cs0, struct omap_sdrc_params *sdrc_cs1) { - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { + if (cpu_is_omap24xx() || omap3_has_sdrc()) { omap2_sdrc_init(sdrc_cs0, sdrc_cs1); _omap2_init_reprogram_sdrc(); } diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 23049c487c4..0b9a23d721f 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -110,7 +110,7 @@ static void omap_mask_irq(struct irq_data *d) unsigned int irq = d->irq; int offset = irq & (~(IRQ_BITS_PER_REG - 1)); - if (cpu_is_omap34xx()) { + if (cpu_is_omap34xx() && !cpu_is_ti816x()) { int spurious = 0; /* @@ -205,6 +205,9 @@ void __init omap_init_irq(void) BUG_ON(!base); + if (cpu_is_ti816x()) + bank->nr_irqs = 128; + /* Static mapping, never released */ bank->base_reg = ioremap(base, SZ_4K); if (!bank->base_reg) { diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 74e25cd4bd3..47eef48b883 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -486,7 +486,7 @@ static void omap_uart_idle_init(struct omap_uart_state *uart) mod_timer(&uart->timer, jiffies + uart->timeout); omap_uart_smart_idle_enable(uart, 0); - if (cpu_is_omap34xx()) { + if (cpu_is_omap34xx() && !cpu_is_ti816x()) { u32 mod = (uart->num > 1) ? OMAP3430_PER_MOD : CORE_MOD; u32 wk_mask = 0; u32 padconf = 0; @@ -762,13 +762,13 @@ void __init omap_serial_init_port(struct omap_board_data *bdata) p->private_data = uart; /* - * omap44xx: Never read empty UART fifo + * omap44xx, ti816x: Never read empty UART fifo * omap3xxx: Never read empty UART fifo on UARTs * with IP rev >=0x52 */ uart->regshift = p->regshift; uart->membase = p->membase; - if (cpu_is_omap44xx()) + if (cpu_is_omap44xx() || cpu_is_ti816x()) uart->errata |= UART_ERRATA_FIFO_FULL_ABORT; else if ((serial_read_reg(uart, UART_OMAP_MVER) & 0xFF) >= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV) @@ -850,7 +850,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata) } /* Enable the MDR1 errata for OMAP3 */ - if (cpu_is_omap34xx()) + if (cpu_is_omap34xx() && !cpu_is_ti816x()) uart->errata |= UART_ERRATA_i202_MDR1_ACCESS; } diff --git a/arch/arm/plat-omap/include/plat/hardware.h b/arch/arm/plat-omap/include/plat/hardware.h index d5b26adfb89..e87efe1499b 100644 --- a/arch/arm/plat-omap/include/plat/hardware.h +++ b/arch/arm/plat-omap/include/plat/hardware.h @@ -286,5 +286,6 @@ #include #include #include +#include #endif /* __ASM_ARCH_OMAP_HARDWARE_H */ diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h index ef4106c1318..427fc8a7c07 100644 --- a/arch/arm/plat-omap/include/plat/io.h +++ b/arch/arm/plat-omap/include/plat/io.h @@ -283,6 +283,14 @@ static inline void omap34xx_map_common_io(void) } #endif +#ifdef CONFIG_SOC_OMAPTI816X +extern void omapti816x_map_common_io(void); +#else +static inline void omapti816x_map_common_io(void) +{ +} +#endif + #ifdef CONFIG_ARCH_OMAP4 extern void omap44xx_map_common_io(void); #else diff --git a/arch/arm/plat-omap/include/plat/ti816x.h b/arch/arm/plat-omap/include/plat/ti816x.h new file mode 100644 index 00000000000..50510f5dda1 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/ti816x.h @@ -0,0 +1,27 @@ +/* + * This file contains the address data for various TI816X modules. + * + * Copyright (C) 2010 Texas Instruments, Inc. - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ASM_ARCH_TI816X_H +#define __ASM_ARCH_TI816X_H + +#define L4_SLOW_TI816X_BASE 0x48000000 + +#define TI816X_SCM_BASE 0x48140000 +#define TI816X_CTRL_BASE TI816X_SCM_BASE +#define TI816X_PRCM_BASE 0x48180000 + +#define TI816X_ARM_INTC_BASE 0x48200000 + +#endif /* __ASM_ARCH_TI816X_H */ diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c index f1295fafcd3..f1ecfa9fc61 100644 --- a/arch/arm/plat-omap/io.c +++ b/arch/arm/plat-omap/io.c @@ -85,7 +85,10 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type) } #endif #ifdef CONFIG_ARCH_OMAP3 - if (cpu_is_omap34xx()) { + if (cpu_is_ti816x()) { + if (BETWEEN(p, L4_34XX_PHYS, L4_34XX_SIZE)) + return XLATE(p, L4_34XX_PHYS, L4_34XX_VIRT); + } else if (cpu_is_omap34xx()) { if (BETWEEN(p, L3_34XX_PHYS, L3_34XX_SIZE)) return XLATE(p, L3_34XX_PHYS, L3_34XX_VIRT); if (BETWEEN(p, L4_34XX_PHYS, L4_34XX_SIZE)) -- cgit v1.2.3-18-g5258 From 2c87fb2e644d9141c8723a44a320bb5850790b67 Mon Sep 17 00:00:00 2001 From: Hemant Pedanekar Date: Tue, 15 Feb 2011 23:06:08 +0530 Subject: TI816X: Create board support and enable build for TI816X EVM This patch adds minimal support and build configuration for TI816X EVM. Signed-off-by: Hemant Pedanekar Reviewed-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 5 +++ arch/arm/mach-omap2/Makefile | 1 + arch/arm/mach-omap2/board-ti8168evm.c | 57 +++++++++++++++++++++++++++++++++++ 3 files changed, 63 insertions(+) create mode 100644 arch/arm/mach-omap2/board-ti8168evm.c (limited to 'arch') diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 23548b60bb1..7a82a76522a 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -299,6 +299,11 @@ config MACH_OMAP_3630SDP default y select OMAP_PACKAGE_CBP +config MACH_TI8168EVM + bool "TI8168 Evaluation Module" + depends on SOC_OMAPTI816X + default y + config MACH_OMAP_4430SDP bool "OMAP 4430 SDP board" default y diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 1c0c2b02d87..b577e001d20 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -224,6 +224,7 @@ obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o \ hsmmc.o +obj-$(CONFIG_MACH_TI8168EVM) += board-ti8168evm.o # Platform specific device init code usbfs-$(CONFIG_ARCH_OMAP_OTG) := usb-fs.o obj-y += $(usbfs-m) $(usbfs-y) diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c new file mode 100644 index 00000000000..6282cc4a977 --- /dev/null +++ b/arch/arm/mach-omap2/board-ti8168evm.c @@ -0,0 +1,57 @@ +/* + * Code for TI8168 EVM. + * + * Copyright (C) 2010 Texas Instruments, Inc. - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include +#include + +#include +#include +#include +#include + +#include +#include +#include + +static struct omap_board_config_kernel ti8168_evm_config[] __initdata = { +}; + +static void __init ti8168_evm_init_irq(void) +{ + omap_board_config = ti8168_evm_config; + omap_board_config_size = ARRAY_SIZE(ti8168_evm_config); + omap2_init_common_infrastructure(); + omap2_init_common_devices(NULL, NULL); + omap_init_irq(); +} + +static void __init ti8168_evm_init(void) +{ + omap_serial_init(); +} + +static void __init ti8168_evm_map_io(void) +{ + omap2_set_globals_ti816x(); + omapti816x_map_common_io(); +} + +MACHINE_START(TI8168EVM, "ti8168evm") + /* Maintainer: Texas Instruments */ + .boot_params = 0x80000100, + .map_io = ti8168_evm_map_io, + .init_irq = ti8168_evm_init_irq, + .timer = &omap_timer, + .init_machine = ti8168_evm_init, +MACHINE_END -- cgit v1.2.3-18-g5258 From 4d887a250d6294d4e17851da46d6eab4de83c91e Mon Sep 17 00:00:00 2001 From: Hemant Pedanekar Date: Tue, 15 Feb 2011 23:06:17 +0530 Subject: TI816X: Add low level debug support This patch adds support for low level debugging on TI816X boards. Currently the support for UART3 console on TI816X EVM is added. Signed-off-by: Hemant Pedanekar Reviewed-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/include/mach/debug-macro.S | 12 ++++++++++++ arch/arm/plat-omap/include/plat/serial.h | 8 ++++++++ arch/arm/plat-omap/include/plat/uncompress.h | 7 +++++++ 3 files changed, 27 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S index 6a4d4136002..e1b0f17b092 100644 --- a/arch/arm/mach-omap2/include/mach/debug-macro.S +++ b/arch/arm/mach-omap2/include/mach/debug-macro.S @@ -69,6 +69,12 @@ omap_uart_lsr: .word 0 beq 34f @ configure OMAP3UART4 cmp \rp, #OMAP4UART4 @ only on 44xx beq 44f @ configure OMAP4UART4 + cmp \rp, #TI816XUART1 @ ti816x UART offsets different + beq 81f @ configure UART1 + cmp \rp, #TI816XUART2 @ ti816x UART offsets different + beq 82f @ configure UART2 + cmp \rp, #TI816XUART3 @ ti816x UART offsets different + beq 83f @ configure UART3 cmp \rp, #ZOOM_UART @ only on zoom2/3 beq 95f @ configure ZOOM_UART @@ -91,6 +97,12 @@ omap_uart_lsr: .word 0 b 98f 44: mov \rp, #UART_OFFSET(OMAP4_UART4_BASE) b 98f +81: mov \rp, #UART_OFFSET(TI816X_UART1_BASE) + b 98f +82: mov \rp, #UART_OFFSET(TI816X_UART2_BASE) + b 98f +83: mov \rp, #UART_OFFSET(TI816X_UART3_BASE) + b 98f 95: ldr \rp, =ZOOM_UART_BASE mrc p15, 0, \rv, c1, c0 tst \rv, #1 @ MMU enabled? diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h index a1a118d052e..8061695aa52 100644 --- a/arch/arm/plat-omap/include/plat/serial.h +++ b/arch/arm/plat-omap/include/plat/serial.h @@ -51,6 +51,11 @@ #define OMAP4_UART3_BASE 0x48020000 #define OMAP4_UART4_BASE 0x4806e000 +/* TI816X serial ports */ +#define TI816X_UART1_BASE 0x48020000 +#define TI816X_UART2_BASE 0x48022000 +#define TI816X_UART3_BASE 0x48024000 + /* External port on Zoom2/3 */ #define ZOOM_UART_BASE 0x10000000 #define ZOOM_UART_VIRT 0xfa400000 @@ -81,6 +86,9 @@ #define OMAP4UART2 OMAP2UART2 #define OMAP4UART3 43 #define OMAP4UART4 44 +#define TI816XUART1 81 +#define TI816XUART2 82 +#define TI816XUART3 83 #define ZOOM_UART 95 /* Only on zoom2/3 */ /* This is only used by 8250.c for omap1510 */ diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index ad98b85cae2..30b891c4a93 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -93,6 +93,10 @@ static inline void flush(void) #define DEBUG_LL_ZOOM(mach) \ _DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART) +#define DEBUG_LL_TI816X(p, mach) \ + _DEBUG_LL_ENTRY(mach, TI816X_UART##p##_BASE, OMAP_PORT_SHIFT, \ + TI816XUART##p) + static inline void __arch_decomp_setup(unsigned long arch_id) { int port = 0; @@ -166,6 +170,9 @@ static inline void __arch_decomp_setup(unsigned long arch_id) DEBUG_LL_ZOOM(omap_zoom2); DEBUG_LL_ZOOM(omap_zoom3); + /* TI8168 base boards using UART3 */ + DEBUG_LL_TI816X(3, ti8168evm); + } while (0); } -- cgit v1.2.3-18-g5258 From e811d3272dbed154b8c56a37392bb1d23c9bd71e Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 16 Feb 2011 08:45:46 -0800 Subject: TI816X: Update to use init_early Update to use init_early Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-ti8168evm.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c index 6282cc4a977..f2b097190e0 100644 --- a/arch/arm/mach-omap2/board-ti8168evm.c +++ b/arch/arm/mach-omap2/board-ti8168evm.c @@ -27,12 +27,16 @@ static struct omap_board_config_kernel ti8168_evm_config[] __initdata = { }; -static void __init ti8168_evm_init_irq(void) +static void __init ti8168_init_early(void) { omap_board_config = ti8168_evm_config; omap_board_config_size = ARRAY_SIZE(ti8168_evm_config); omap2_init_common_infrastructure(); omap2_init_common_devices(NULL, NULL); +} + +static void __init ti8168_evm_init_irq(void) +{ omap_init_irq(); } @@ -51,6 +55,7 @@ MACHINE_START(TI8168EVM, "ti8168evm") /* Maintainer: Texas Instruments */ .boot_params = 0x80000100, .map_io = ti8168_evm_map_io, + .init_early = ti8168_init_early, .init_irq = ti8168_evm_init_irq, .timer = &omap_timer, .init_machine = ti8168_evm_init, -- cgit v1.2.3-18-g5258 From 405505c2b7b9f8a2d2b90e9e7fb4590b059e15dd Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Sun, 16 Jan 2011 13:22:03 +0200 Subject: arm: omap2: clksel: fix compile warningOrganization: Texas Instruments\n Fix the following compile warning: arch/arm/mach-omap2/clkt_clksel.c: In function '_get_div_and_fieldval': arch/arm/mach-omap2/clkt_clksel.c:100:35: warning: 'max_clkr' may be used uninitialized in this function Acked-by: Paul Walmsley Signed-off-by: Felipe Balbi Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/clkt_clksel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clkt_clksel.c b/arch/arm/mach-omap2/clkt_clksel.c index a781cd6795a..e25364de028 100644 --- a/arch/arm/mach-omap2/clkt_clksel.c +++ b/arch/arm/mach-omap2/clkt_clksel.c @@ -97,7 +97,7 @@ static u8 _get_div_and_fieldval(struct clk *src_clk, struct clk *clk, u32 *field_val) { const struct clksel *clks; - const struct clksel_rate *clkr, *max_clkr; + const struct clksel_rate *clkr, *max_clkr = NULL; u8 max_div = 0; clks = _get_clksel_by_parent(clk, src_clk); -- cgit v1.2.3-18-g5258 From df3ca747ebea6168059cd7ca7e1b3f65aae3bcc1 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Tue, 1 Feb 2011 16:26:33 +0900 Subject: ARM: S5PV310: Cleanup map.h file Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pv310/include/mach/map.h | 149 +++++++++++++++---------------- 1 file changed, 73 insertions(+), 76 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s5pv310/include/mach/map.h b/arch/arm/mach-s5pv310/include/mach/map.h index 3060f78e12a..901657fa7a1 100644 --- a/arch/arm/mach-s5pv310/include/mach/map.h +++ b/arch/arm/mach-s5pv310/include/mach/map.h @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s5pv310/include/mach/map.h * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com/ * * S5PV310 - Memory map definitions @@ -23,90 +23,43 @@ #include -#define S5PV310_PA_SYSRAM (0x02025000) +#define S5PV310_PA_SYSRAM 0x02025000 -#define S5PV310_PA_SROM_BANK(x) (0x04000000 + ((x) * 0x01000000)) - -#define S5PC210_PA_ONENAND (0x0C000000) -#define S5P_PA_ONENAND S5PC210_PA_ONENAND - -#define S5PC210_PA_ONENAND_DMA (0x0C600000) -#define S5P_PA_ONENAND_DMA S5PC210_PA_ONENAND_DMA - -#define S5PV310_PA_CHIPID (0x10000000) -#define S5P_PA_CHIPID S5PV310_PA_CHIPID - -#define S5PV310_PA_SYSCON (0x10010000) -#define S5P_PA_SYSCON S5PV310_PA_SYSCON +#define S5PV310_PA_I2S0 0x03830000 +#define S5PV310_PA_I2S1 0xE3100000 +#define S5PV310_PA_I2S2 0xE2A00000 -#define S5PV310_PA_PMU (0x10020000) +#define S5PV310_PA_PCM0 0x03840000 +#define S5PV310_PA_PCM1 0x13980000 +#define S5PV310_PA_PCM2 0x13990000 -#define S5PV310_PA_CMU (0x10030000) - -#define S5PV310_PA_WATCHDOG (0x10060000) -#define S5PV310_PA_RTC (0x10070000) - -#define S5PV310_PA_DMC0 (0x10400000) - -#define S5PV310_PA_COMBINER (0x10448000) - -#define S5PV310_PA_COREPERI (0x10500000) -#define S5PV310_PA_GIC_CPU (0x10500100) -#define S5PV310_PA_TWD (0x10500600) -#define S5PV310_PA_GIC_DIST (0x10501000) -#define S5PV310_PA_L2CC (0x10502000) - -/* DMA */ -#define S5PV310_PA_MDMA 0x10810000 -#define S5PV310_PA_PDMA0 0x12680000 -#define S5PV310_PA_PDMA1 0x12690000 - -#define S5PV310_PA_GPIO1 (0x11400000) -#define S5PV310_PA_GPIO2 (0x11000000) -#define S5PV310_PA_GPIO3 (0x03860000) - -#define S5PV310_PA_MIPI_CSIS0 0x11880000 -#define S5PV310_PA_MIPI_CSIS1 0x11890000 +#define S5PV310_PA_SROM_BANK(x) (0x04000000 + ((x) * 0x01000000)) -#define S5PV310_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000)) +#define S5PC210_PA_ONENAND 0x0C000000 +#define S5PC210_PA_ONENAND_DMA 0x0C600000 -#define S5PV310_PA_SROMC (0x12570000) -#define S5P_PA_SROMC S5PV310_PA_SROMC +#define S5PV310_PA_CHIPID 0x10000000 -/* S/PDIF */ -#define S5PV310_PA_SPDIF 0xE1100000 +#define S5PV310_PA_SYSCON 0x10010000 +#define S5PV310_PA_PMU 0x10020000 +#define S5PV310_PA_CMU 0x10030000 -/* I2S */ -#define S5PV310_PA_I2S0 0x03830000 -#define S5PV310_PA_I2S1 0xE3100000 -#define S5PV310_PA_I2S2 0xE2A00000 +#define S5PV310_PA_WATCHDOG 0x10060000 +#define S5PV310_PA_RTC 0x10070000 -/* PCM */ -#define S5PV310_PA_PCM0 0x03840000 -#define S5PV310_PA_PCM1 0x13980000 -#define S5PV310_PA_PCM2 0x13990000 +#define S5PV310_PA_DMC0 0x10400000 -/* AC97 */ -#define S5PV310_PA_AC97 0x139A0000 +#define S5PV310_PA_COMBINER 0x10448000 -#define S5PV310_PA_UART (0x13800000) +#define S5PV310_PA_COREPERI 0x10500000 +#define S5PV310_PA_GIC_CPU 0x10500100 +#define S5PV310_PA_TWD 0x10500600 +#define S5PV310_PA_GIC_DIST 0x10501000 +#define S5PV310_PA_L2CC 0x10502000 -#define S5P_PA_UART(x) (S5PV310_PA_UART + ((x) * S3C_UART_OFFSET)) -#define S5P_PA_UART0 S5P_PA_UART(0) -#define S5P_PA_UART1 S5P_PA_UART(1) -#define S5P_PA_UART2 S5P_PA_UART(2) -#define S5P_PA_UART3 S5P_PA_UART(3) -#define S5P_PA_UART4 S5P_PA_UART(4) - -#define S5P_SZ_UART SZ_256 - -#define S5PV310_PA_IIC(x) (0x13860000 + ((x) * 0x10000)) - -#define S5PV310_PA_TIMER (0x139D0000) -#define S5P_PA_TIMER S5PV310_PA_TIMER - -#define S5PV310_PA_SDRAM (0x40000000) -#define S5P_PA_SDRAM S5PV310_PA_SDRAM +#define S5PV310_PA_MDMA 0x10810000 +#define S5PV310_PA_PDMA0 0x12680000 +#define S5PV310_PA_PDMA1 0x12690000 #define S5PV310_PA_SYSMMU_MDMA 0x10A40000 #define S5PV310_PA_SYSMMU_SSS 0x10A50000 @@ -125,8 +78,31 @@ #define S5PV310_PA_SYSMMU_MFC_L 0x13620000 #define S5PV310_PA_SYSMMU_MFC_R 0x13630000 -/* compatibiltiy defines. */ -#define S3C_PA_UART S5PV310_PA_UART +#define S5PV310_PA_GPIO1 0x11400000 +#define S5PV310_PA_GPIO2 0x11000000 +#define S5PV310_PA_GPIO3 0x03860000 + +#define S5PV310_PA_MIPI_CSIS0 0x11880000 +#define S5PV310_PA_MIPI_CSIS1 0x11890000 + +#define S5PV310_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000)) + +#define S5PV310_PA_SROMC 0x12570000 + +#define S5PV310_PA_UART 0x13800000 + +#define S5PV310_PA_IIC(x) (0x13860000 + ((x) * 0x10000)) + +#define S5PV310_PA_AC97 0x139A0000 + +#define S5PV310_PA_TIMER 0x139D0000 + +#define S5PV310_PA_SDRAM 0x40000000 + +#define S5PV310_PA_SPDIF 0xE1100000 + +/* Compatibiltiy Defines */ + #define S3C_PA_HSMMC0 S5PV310_PA_HSMMC(0) #define S3C_PA_HSMMC1 S5PV310_PA_HSMMC(1) #define S3C_PA_HSMMC2 S5PV310_PA_HSMMC(2) @@ -141,7 +117,28 @@ #define S3C_PA_IIC7 S5PV310_PA_IIC(7) #define S3C_PA_RTC S5PV310_PA_RTC #define S3C_PA_WDT S5PV310_PA_WATCHDOG + +#define S5P_PA_CHIPID S5PV310_PA_CHIPID #define S5P_PA_MIPI_CSIS0 S5PV310_PA_MIPI_CSIS0 #define S5P_PA_MIPI_CSIS1 S5PV310_PA_MIPI_CSIS1 +#define S5P_PA_ONENAND S5PC210_PA_ONENAND +#define S5P_PA_ONENAND_DMA S5PC210_PA_ONENAND_DMA +#define S5P_PA_SDRAM S5PV310_PA_SDRAM +#define S5P_PA_SROMC S5PV310_PA_SROMC +#define S5P_PA_SYSCON S5PV310_PA_SYSCON +#define S5P_PA_TIMER S5PV310_PA_TIMER + +/* UART */ + +#define S3C_PA_UART S5PV310_PA_UART + +#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET)) +#define S5P_PA_UART0 S5P_PA_UART(0) +#define S5P_PA_UART1 S5P_PA_UART(1) +#define S5P_PA_UART2 S5P_PA_UART(2) +#define S5P_PA_UART3 S5P_PA_UART(3) +#define S5P_PA_UART4 S5P_PA_UART(4) + +#define S5P_SZ_UART SZ_256 #endif /* __ASM_ARCH_MAP_H */ -- cgit v1.2.3-18-g5258 From ece3410efc4286b512af77934860436992127bde Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Tue, 1 Feb 2011 16:44:31 +0900 Subject: ARM: S5PV210: Cleanup map.h file Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pv210/include/mach/map.h | 168 +++++++++++++++---------------- 1 file changed, 83 insertions(+), 85 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h index 3611492ad68..1dd58836fd4 100644 --- a/arch/arm/mach-s5pv210/include/mach/map.h +++ b/arch/arm/mach-s5pv210/include/mach/map.h @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s5pv210/include/mach/map.h * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com/ * * S5PV210 - Memory map definitions @@ -16,122 +16,120 @@ #include #include -#define S5PV210_PA_SROM_BANK5 (0xA8000000) +#define S5PV210_PA_SDRAM 0x20000000 -#define S5PC110_PA_ONENAND (0xB0000000) -#define S5P_PA_ONENAND S5PC110_PA_ONENAND +#define S5PV210_PA_SROM_BANK5 0xA8000000 -#define S5PC110_PA_ONENAND_DMA (0xB0600000) -#define S5P_PA_ONENAND_DMA S5PC110_PA_ONENAND_DMA +#define S5PC110_PA_ONENAND 0xB0000000 +#define S5PC110_PA_ONENAND_DMA 0xB0600000 -#define S5PV210_PA_CHIPID (0xE0000000) -#define S5P_PA_CHIPID S5PV210_PA_CHIPID +#define S5PV210_PA_CHIPID 0xE0000000 -#define S5PV210_PA_SYSCON (0xE0100000) -#define S5P_PA_SYSCON S5PV210_PA_SYSCON +#define S5PV210_PA_SYSCON 0xE0100000 -#define S5PV210_PA_GPIO (0xE0200000) +#define S5PV210_PA_GPIO 0xE0200000 -/* SPI */ -#define S5PV210_PA_SPI0 0xE1300000 -#define S5PV210_PA_SPI1 0xE1400000 +#define S5PV210_PA_SPDIF 0xE1100000 -#define S5PV210_PA_KEYPAD (0xE1600000) +#define S5PV210_PA_SPI0 0xE1300000 +#define S5PV210_PA_SPI1 0xE1400000 -#define S5PV210_PA_IIC0 (0xE1800000) -#define S5PV210_PA_IIC1 (0xFAB00000) -#define S5PV210_PA_IIC2 (0xE1A00000) +#define S5PV210_PA_KEYPAD 0xE1600000 -#define S5PV210_PA_TIMER (0xE2500000) -#define S5P_PA_TIMER S5PV210_PA_TIMER +#define S5PV210_PA_ADC 0xE1700000 -#define S5PV210_PA_SYSTIMER (0xE2600000) +#define S5PV210_PA_IIC0 0xE1800000 +#define S5PV210_PA_IIC1 0xFAB00000 +#define S5PV210_PA_IIC2 0xE1A00000 -#define S5PV210_PA_WATCHDOG (0xE2700000) +#define S5PV210_PA_AC97 0xE2200000 -#define S5PV210_PA_RTC (0xE2800000) -#define S5PV210_PA_UART (0xE2900000) +#define S5PV210_PA_PCM0 0xE2300000 +#define S5PV210_PA_PCM1 0xE1200000 +#define S5PV210_PA_PCM2 0xE2B00000 -#define S5P_PA_UART0 (S5PV210_PA_UART + 0x0) -#define S5P_PA_UART1 (S5PV210_PA_UART + 0x400) -#define S5P_PA_UART2 (S5PV210_PA_UART + 0x800) -#define S5P_PA_UART3 (S5PV210_PA_UART + 0xC00) +#define S5PV210_PA_TIMER 0xE2500000 +#define S5PV210_PA_SYSTIMER 0xE2600000 +#define S5PV210_PA_WATCHDOG 0xE2700000 +#define S5PV210_PA_RTC 0xE2800000 -#define S5P_SZ_UART SZ_256 +#define S5PV210_PA_UART 0xE2900000 -#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET)) +#define S5PV210_PA_SROMC 0xE8000000 -#define S5PV210_PA_SROMC (0xE8000000) -#define S5P_PA_SROMC S5PV210_PA_SROMC +#define S5PV210_PA_CFCON 0xE8200000 -#define S5PV210_PA_CFCON (0xE8200000) +#define S5PV210_PA_HSMMC(x) (0xEB000000 + ((x) * 0x100000)) -#define S5PV210_PA_MDMA 0xFA200000 -#define S5PV210_PA_PDMA0 0xE0900000 -#define S5PV210_PA_PDMA1 0xE0A00000 +#define S5PV210_PA_HSOTG 0xEC000000 +#define S5PV210_PA_HSPHY 0xEC100000 -#define S5PV210_PA_FB (0xF8000000) +#define S5PV210_PA_IIS0 0xEEE30000 +#define S5PV210_PA_IIS1 0xE2100000 +#define S5PV210_PA_IIS2 0xE2A00000 -#define S5PV210_PA_FIMC0 (0xFB200000) -#define S5PV210_PA_FIMC1 (0xFB300000) -#define S5PV210_PA_FIMC2 (0xFB400000) +#define S5PV210_PA_DMC0 0xF0000000 +#define S5PV210_PA_DMC1 0xF1400000 -#define S5PV210_PA_HSMMC(x) (0xEB000000 + ((x) * 0x100000)) +#define S5PV210_PA_VIC0 0xF2000000 +#define S5PV210_PA_VIC1 0xF2100000 +#define S5PV210_PA_VIC2 0xF2200000 +#define S5PV210_PA_VIC3 0xF2300000 -#define S5PV210_PA_HSOTG (0xEC000000) -#define S5PV210_PA_HSPHY (0xEC100000) +#define S5PV210_PA_FB 0xF8000000 -#define S5PV210_PA_VIC0 (0xF2000000) -#define S5PV210_PA_VIC1 (0xF2100000) -#define S5PV210_PA_VIC2 (0xF2200000) -#define S5PV210_PA_VIC3 (0xF2300000) +#define S5PV210_PA_MDMA 0xFA200000 +#define S5PV210_PA_PDMA0 0xE0900000 +#define S5PV210_PA_PDMA1 0xE0A00000 -#define S5PV210_PA_SDRAM (0x20000000) -#define S5P_PA_SDRAM S5PV210_PA_SDRAM +#define S5PV210_PA_MIPI_CSIS 0xFA600000 -/* S/PDIF */ -#define S5PV210_PA_SPDIF 0xE1100000 +#define S5PV210_PA_FIMC0 0xFB200000 +#define S5PV210_PA_FIMC1 0xFB300000 +#define S5PV210_PA_FIMC2 0xFB400000 -/* I2S */ -#define S5PV210_PA_IIS0 0xEEE30000 -#define S5PV210_PA_IIS1 0xE2100000 -#define S5PV210_PA_IIS2 0xE2A00000 +/* Compatibiltiy Defines */ -/* PCM */ -#define S5PV210_PA_PCM0 0xE2300000 -#define S5PV210_PA_PCM1 0xE1200000 -#define S5PV210_PA_PCM2 0xE2B00000 +#define S3C_PA_FB S5PV210_PA_FB +#define S3C_PA_HSMMC0 S5PV210_PA_HSMMC(0) +#define S3C_PA_HSMMC1 S5PV210_PA_HSMMC(1) +#define S3C_PA_HSMMC2 S5PV210_PA_HSMMC(2) +#define S3C_PA_HSMMC3 S5PV210_PA_HSMMC(3) +#define S3C_PA_IIC S5PV210_PA_IIC0 +#define S3C_PA_IIC1 S5PV210_PA_IIC1 +#define S3C_PA_IIC2 S5PV210_PA_IIC2 +#define S3C_PA_RTC S5PV210_PA_RTC +#define S3C_PA_USB_HSOTG S5PV210_PA_HSOTG +#define S3C_PA_WDT S5PV210_PA_WATCHDOG -/* AC97 */ -#define S5PV210_PA_AC97 0xE2200000 +#define S5P_PA_CHIPID S5PV210_PA_CHIPID +#define S5P_PA_FIMC0 S5PV210_PA_FIMC0 +#define S5P_PA_FIMC1 S5PV210_PA_FIMC1 +#define S5P_PA_FIMC2 S5PV210_PA_FIMC2 +#define S5P_PA_MIPI_CSIS0 S5PV210_PA_MIPI_CSIS +#define S5P_PA_ONENAND S5PC110_PA_ONENAND +#define S5P_PA_ONENAND_DMA S5PC110_PA_ONENAND_DMA +#define S5P_PA_SDRAM S5PV210_PA_SDRAM +#define S5P_PA_SROMC S5PV210_PA_SROMC +#define S5P_PA_SYSCON S5PV210_PA_SYSCON +#define S5P_PA_TIMER S5PV210_PA_TIMER -#define S5PV210_PA_ADC (0xE1700000) +#define SAMSUNG_PA_ADC S5PV210_PA_ADC +#define SAMSUNG_PA_CFCON S5PV210_PA_CFCON +#define SAMSUNG_PA_KEYPAD S5PV210_PA_KEYPAD -#define S5PV210_PA_DMC0 (0xF0000000) -#define S5PV210_PA_DMC1 (0xF1400000) +/* UART */ -#define S5PV210_PA_MIPI_CSIS 0xFA600000 +#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET)) -/* compatibiltiy defines. */ -#define S3C_PA_UART S5PV210_PA_UART -#define S3C_PA_HSMMC0 S5PV210_PA_HSMMC(0) -#define S3C_PA_HSMMC1 S5PV210_PA_HSMMC(1) -#define S3C_PA_HSMMC2 S5PV210_PA_HSMMC(2) -#define S3C_PA_HSMMC3 S5PV210_PA_HSMMC(3) -#define S3C_PA_IIC S5PV210_PA_IIC0 -#define S3C_PA_IIC1 S5PV210_PA_IIC1 -#define S3C_PA_IIC2 S5PV210_PA_IIC2 -#define S3C_PA_FB S5PV210_PA_FB -#define S3C_PA_RTC S5PV210_PA_RTC -#define S3C_PA_WDT S5PV210_PA_WATCHDOG -#define S3C_PA_USB_HSOTG S5PV210_PA_HSOTG -#define S5P_PA_FIMC0 S5PV210_PA_FIMC0 -#define S5P_PA_FIMC1 S5PV210_PA_FIMC1 -#define S5P_PA_FIMC2 S5PV210_PA_FIMC2 -#define S5P_PA_MIPI_CSIS0 S5PV210_PA_MIPI_CSIS +#define S3C_PA_UART S5PV210_PA_UART -#define SAMSUNG_PA_ADC S5PV210_PA_ADC -#define SAMSUNG_PA_CFCON S5PV210_PA_CFCON -#define SAMSUNG_PA_KEYPAD S5PV210_PA_KEYPAD +#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET)) +#define S5P_PA_UART0 S5P_PA_UART(0) +#define S5P_PA_UART1 S5P_PA_UART(1) +#define S5P_PA_UART2 S5P_PA_UART(2) +#define S5P_PA_UART3 S5P_PA_UART(3) + +#define S5P_SZ_UART SZ_256 #endif /* __ASM_ARCH_MAP_H */ -- cgit v1.2.3-18-g5258 From 5180f5e036574cb71cbd366fb5e94aac454ce771 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Tue, 1 Feb 2011 17:48:35 +0900 Subject: ARM: S5PC100: Clenaup map.h file Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pc100/include/mach/map.h | 193 +++++++++++++------------------ 1 file changed, 83 insertions(+), 110 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h index 328467b346a..ccbe6b767f7 100644 --- a/arch/arm/mach-s5pc100/include/mach/map.h +++ b/arch/arm/mach-s5pc100/include/mach/map.h @@ -1,4 +1,7 @@ /* linux/arch/arm/mach-s5pc100/include/mach/map.h + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ * * Copyright 2009 Samsung Electronics Co. * Byungho Min @@ -16,145 +19,115 @@ #include #include -/* - * map-base.h has already defined virtual memory address - * S3C_VA_IRQ S3C_ADDR(0x00000000) irq controller(s) - * S3C_VA_SYS S3C_ADDR(0x00100000) system control - * S3C_VA_MEM S3C_ADDR(0x00200000) system control (not used) - * S3C_VA_TIMER S3C_ADDR(0x00300000) timer block - * S3C_VA_WATCHDOG S3C_ADDR(0x00400000) watchdog - * S3C_VA_UART S3C_ADDR(0x01000000) UART - * - * S5PC100 specific virtual memory address can be defined here - * S5PC1XX_VA_GPIO S3C_ADDR(0x00500000) GPIO - * - */ +#define S5PC100_PA_SDRAM 0x20000000 + +#define S5PC100_PA_ONENAND 0xE7100000 +#define S5PC100_PA_ONENAND_BUF 0xB0000000 + +#define S5PC100_PA_CHIPID 0xE0000000 -#define S5PC100_PA_ONENAND_BUF (0xB0000000) -#define S5PC100_SZ_ONENAND_BUF (SZ_256M - SZ_32M) +#define S5PC100_PA_SYSCON 0xE0100000 -/* Chip ID */ +#define S5PC100_PA_OTHERS 0xE0200000 -#define S5PC100_PA_CHIPID (0xE0000000) -#define S5P_PA_CHIPID S5PC100_PA_CHIPID +#define S5PC100_PA_GPIO 0xE0300000 -#define S5PC100_PA_SYSCON (0xE0100000) -#define S5P_PA_SYSCON S5PC100_PA_SYSCON +#define S5PC100_PA_VIC0 0xE4000000 +#define S5PC100_PA_VIC1 0xE4100000 +#define S5PC100_PA_VIC2 0xE4200000 -#define S5PC100_PA_OTHERS (0xE0200000) -#define S5PC100_VA_OTHERS (S3C_VA_SYS + 0x10000) +#define S5PC100_PA_SROMC 0xE7000000 -#define S5PC100_PA_GPIO (0xE0300000) -#define S5PC1XX_VA_GPIO S3C_ADDR(0x00500000) +#define S5PC100_PA_CFCON 0xE7800000 -/* Interrupt */ -#define S5PC100_PA_VIC0 (0xE4000000) -#define S5PC100_PA_VIC1 (0xE4100000) -#define S5PC100_PA_VIC2 (0xE4200000) -#define S5PC100_VA_VIC S3C_VA_IRQ -#define S5PC100_VA_VIC_OFFSET 0x10000 -#define S5PC1XX_VA_VIC(x) (S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET)) +#define S5PC100_PA_MDMA 0xE8100000 +#define S5PC100_PA_PDMA0 0xE9000000 +#define S5PC100_PA_PDMA1 0xE9200000 -#define S5PC100_PA_SROMC (0xE7000000) -#define S5P_PA_SROMC S5PC100_PA_SROMC +#define S5PC100_PA_TIMER 0xEA000000 +#define S5PC100_PA_SYSTIMER 0xEA100000 +#define S5PC100_PA_WATCHDOG 0xEA200000 +#define S5PC100_PA_RTC 0xEA300000 -#define S5PC100_PA_ONENAND (0xE7100000) +#define S5PC100_PA_UART 0xEC000000 -#define S5PC100_PA_CFCON (0xE7800000) +#define S5PC100_PA_IIC0 0xEC100000 +#define S5PC100_PA_IIC1 0xEC200000 -/* DMA */ -#define S5PC100_PA_MDMA (0xE8100000) -#define S5PC100_PA_PDMA0 (0xE9000000) -#define S5PC100_PA_PDMA1 (0xE9200000) +#define S5PC100_PA_SPI0 0xEC300000 +#define S5PC100_PA_SPI1 0xEC400000 +#define S5PC100_PA_SPI2 0xEC500000 -/* Timer */ -#define S5PC100_PA_TIMER (0xEA000000) -#define S5P_PA_TIMER S5PC100_PA_TIMER +#define S5PC100_PA_USB_HSOTG 0xED200000 +#define S5PC100_PA_USB_HSPHY 0xED300000 -#define S5PC100_PA_SYSTIMER (0xEA100000) +#define S5PC100_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000)) -#define S5PC100_PA_WATCHDOG (0xEA200000) -#define S5PC100_PA_RTC (0xEA300000) +#define S5PC100_PA_FB 0xEE000000 -#define S5PC100_PA_UART (0xEC000000) +#define S5PC100_PA_FIMC0 0xEE200000 +#define S5PC100_PA_FIMC1 0xEE300000 +#define S5PC100_PA_FIMC2 0xEE400000 -#define S5P_PA_UART0 (S5PC100_PA_UART + 0x0) -#define S5P_PA_UART1 (S5PC100_PA_UART + 0x400) -#define S5P_PA_UART2 (S5PC100_PA_UART + 0x800) -#define S5P_PA_UART3 (S5PC100_PA_UART + 0xC00) -#define S5P_SZ_UART SZ_256 +#define S5PC100_PA_I2S0 0xF2000000 +#define S5PC100_PA_I2S1 0xF2100000 +#define S5PC100_PA_I2S2 0xF2200000 -#define S5PC100_PA_IIC0 (0xEC100000) -#define S5PC100_PA_IIC1 (0xEC200000) +#define S5PC100_PA_AC97 0xF2300000 -/* SPI */ -#define S5PC100_PA_SPI0 0xEC300000 -#define S5PC100_PA_SPI1 0xEC400000 -#define S5PC100_PA_SPI2 0xEC500000 +#define S5PC100_PA_PCM0 0xF2400000 +#define S5PC100_PA_PCM1 0xF2500000 -/* USB HS OTG */ -#define S5PC100_PA_USB_HSOTG (0xED200000) -#define S5PC100_PA_USB_HSPHY (0xED300000) +#define S5PC100_PA_SPDIF 0xF2600000 -#define S5PC100_PA_FB (0xEE000000) +#define S5PC100_PA_TSADC 0xF3000000 -#define S5PC100_PA_FIMC0 (0xEE200000) -#define S5PC100_PA_FIMC1 (0xEE300000) -#define S5PC100_PA_FIMC2 (0xEE400000) +#define S5PC100_PA_KEYPAD 0xF3100000 -#define S5PC100_PA_I2S0 (0xF2000000) -#define S5PC100_PA_I2S1 (0xF2100000) -#define S5PC100_PA_I2S2 (0xF2200000) +/* Compatibiltiy Defines */ -#define S5PC100_PA_AC97 0xF2300000 +#define S3C_PA_FB S5PC100_PA_FB +#define S3C_PA_HSMMC0 S5PC100_PA_HSMMC(0) +#define S3C_PA_HSMMC1 S5PC100_PA_HSMMC(1) +#define S3C_PA_HSMMC2 S5PC100_PA_HSMMC(2) +#define S3C_PA_IIC S5PC100_PA_IIC0 +#define S3C_PA_IIC1 S5PC100_PA_IIC1 +#define S3C_PA_KEYPAD S5PC100_PA_KEYPAD +#define S3C_PA_ONENAND S5PC100_PA_ONENAND +#define S3C_PA_ONENAND_BUF S5PC100_PA_ONENAND_BUF +#define S3C_PA_RTC S5PC100_PA_RTC +#define S3C_PA_TSADC S5PC100_PA_TSADC +#define S3C_PA_USB_HSOTG S5PC100_PA_USB_HSOTG +#define S3C_PA_USB_HSPHY S5PC100_PA_USB_HSPHY +#define S3C_PA_WDT S5PC100_PA_WATCHDOG -/* PCM */ -#define S5PC100_PA_PCM0 0xF2400000 -#define S5PC100_PA_PCM1 0xF2500000 +#define S5P_PA_CHIPID S5PC100_PA_CHIPID +#define S5P_PA_FIMC0 S5PC100_PA_FIMC0 +#define S5P_PA_FIMC1 S5PC100_PA_FIMC1 +#define S5P_PA_FIMC2 S5PC100_PA_FIMC2 +#define S5P_PA_SDRAM S5PC100_PA_SDRAM +#define S5P_PA_SROMC S5PC100_PA_SROMC +#define S5P_PA_SYSCON S5PC100_PA_SYSCON +#define S5P_PA_TIMER S5PC100_PA_TIMER -#define S5PC100_PA_SPDIF 0xF2600000 +#define SAMSUNG_PA_ADC S5PC100_PA_TSADC +#define SAMSUNG_PA_CFCON S5PC100_PA_CFCON +#define SAMSUNG_PA_KEYPAD S5PC100_PA_KEYPAD -#define S5PC100_PA_TSADC (0xF3000000) +#define S5PC100_VA_OTHERS (S3C_VA_SYS + 0x10000) -/* KEYPAD */ -#define S5PC100_PA_KEYPAD (0xF3100000) +#define S3C_SZ_ONENAND_BUF (SZ_256M - SZ_32M) -#define S5PC100_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000)) +/* UART */ -#define S5PC100_PA_SDRAM (0x20000000) -#define S5P_PA_SDRAM S5PC100_PA_SDRAM +#define S3C_PA_UART S5PC100_PA_UART -/* compatibiltiy defines. */ -#define S3C_PA_UART S5PC100_PA_UART -#define S3C_PA_IIC S5PC100_PA_IIC0 -#define S3C_PA_IIC1 S5PC100_PA_IIC1 -#define S3C_PA_FB S5PC100_PA_FB -#define S3C_PA_G2D S5PC100_PA_G2D -#define S3C_PA_G3D S5PC100_PA_G3D -#define S3C_PA_JPEG S5PC100_PA_JPEG -#define S3C_PA_ROTATOR S5PC100_PA_ROTATOR -#define S5P_VA_VIC0 S5PC1XX_VA_VIC(0) -#define S5P_VA_VIC1 S5PC1XX_VA_VIC(1) -#define S5P_VA_VIC2 S5PC1XX_VA_VIC(2) -#define S3C_PA_USB_HSOTG S5PC100_PA_USB_HSOTG -#define S3C_PA_USB_HSPHY S5PC100_PA_USB_HSPHY -#define S3C_PA_HSMMC0 S5PC100_PA_HSMMC(0) -#define S3C_PA_HSMMC1 S5PC100_PA_HSMMC(1) -#define S3C_PA_HSMMC2 S5PC100_PA_HSMMC(2) -#define S3C_PA_KEYPAD S5PC100_PA_KEYPAD -#define S3C_PA_WDT S5PC100_PA_WATCHDOG -#define S3C_PA_TSADC S5PC100_PA_TSADC -#define S3C_PA_ONENAND S5PC100_PA_ONENAND -#define S3C_PA_ONENAND_BUF S5PC100_PA_ONENAND_BUF -#define S3C_SZ_ONENAND_BUF S5PC100_SZ_ONENAND_BUF -#define S3C_PA_RTC S5PC100_PA_RTC - -#define SAMSUNG_PA_ADC S5PC100_PA_TSADC -#define SAMSUNG_PA_CFCON S5PC100_PA_CFCON -#define SAMSUNG_PA_KEYPAD S5PC100_PA_KEYPAD +#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET)) +#define S5P_PA_UART0 S5P_PA_UART(0) +#define S5P_PA_UART1 S5P_PA_UART(1) +#define S5P_PA_UART2 S5P_PA_UART(2) +#define S5P_PA_UART3 S5P_PA_UART(3) -#define S5P_PA_FIMC0 S5PC100_PA_FIMC0 -#define S5P_PA_FIMC1 S5PC100_PA_FIMC1 -#define S5P_PA_FIMC2 S5PC100_PA_FIMC2 +#define S5P_SZ_UART SZ_256 -#endif /* __ASM_ARCH_C100_MAP_H */ +#endif /* __ASM_ARCH_MAP_H */ -- cgit v1.2.3-18-g5258 From d76b782775f1a9e5cd20eabe95e49ba9e03415b0 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Thu, 10 Feb 2011 10:56:18 +0900 Subject: ARM: S5P6442: Cleanup map.h file Signed-off-by: Kukjin Kim --- arch/arm/mach-s5p6442/include/mach/map.h | 69 +++++++++++++++++--------------- 1 file changed, 37 insertions(+), 32 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s5p6442/include/mach/map.h b/arch/arm/mach-s5p6442/include/mach/map.h index 203dd5a18bd..058dab4482a 100644 --- a/arch/arm/mach-s5p6442/include/mach/map.h +++ b/arch/arm/mach-s5p6442/include/mach/map.h @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s5p6442/include/mach/map.h * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com/ * * S5P6442 - Memory map definitions @@ -16,56 +16,61 @@ #include #include -#define S5P6442_PA_CHIPID (0xE0000000) -#define S5P_PA_CHIPID S5P6442_PA_CHIPID +#define S5P6442_PA_SDRAM 0x20000000 -#define S5P6442_PA_SYSCON (0xE0100000) -#define S5P_PA_SYSCON S5P6442_PA_SYSCON +#define S5P6442_PA_I2S0 0xC0B00000 +#define S5P6442_PA_I2S1 0xF2200000 -#define S5P6442_PA_GPIO (0xE0200000) +#define S5P6442_PA_CHIPID 0xE0000000 -#define S5P6442_PA_VIC0 (0xE4000000) -#define S5P6442_PA_VIC1 (0xE4100000) -#define S5P6442_PA_VIC2 (0xE4200000) +#define S5P6442_PA_SYSCON 0xE0100000 -#define S5P6442_PA_SROMC (0xE7000000) -#define S5P_PA_SROMC S5P6442_PA_SROMC +#define S5P6442_PA_GPIO 0xE0200000 -#define S5P6442_PA_MDMA 0xE8000000 -#define S5P6442_PA_PDMA 0xE9000000 +#define S5P6442_PA_VIC0 0xE4000000 +#define S5P6442_PA_VIC1 0xE4100000 +#define S5P6442_PA_VIC2 0xE4200000 -#define S5P6442_PA_TIMER (0xEA000000) -#define S5P_PA_TIMER S5P6442_PA_TIMER +#define S5P6442_PA_SROMC 0xE7000000 -#define S5P6442_PA_SYSTIMER (0xEA100000) +#define S5P6442_PA_MDMA 0xE8000000 +#define S5P6442_PA_PDMA 0xE9000000 -#define S5P6442_PA_WATCHDOG (0xEA200000) +#define S5P6442_PA_TIMER 0xEA000000 -#define S5P6442_PA_UART (0xEC000000) +#define S5P6442_PA_SYSTIMER 0xEA100000 -#define S5P_PA_UART0 (S5P6442_PA_UART + 0x0) -#define S5P_PA_UART1 (S5P6442_PA_UART + 0x400) -#define S5P_PA_UART2 (S5P6442_PA_UART + 0x800) -#define S5P_SZ_UART SZ_256 +#define S5P6442_PA_WATCHDOG 0xEA200000 -#define S5P6442_PA_IIC0 (0xEC100000) +#define S5P6442_PA_UART 0xEC000000 -#define S5P6442_PA_SDRAM (0x20000000) -#define S5P_PA_SDRAM S5P6442_PA_SDRAM +#define S5P6442_PA_IIC0 0xEC100000 #define S5P6442_PA_SPI 0xEC300000 -/* I2S */ -#define S5P6442_PA_I2S0 0xC0B00000 -#define S5P6442_PA_I2S1 0xF2200000 - -/* PCM */ #define S5P6442_PA_PCM0 0xF2400000 #define S5P6442_PA_PCM1 0xF2500000 -/* compatibiltiy defines. */ +/* Compatibiltiy Defines */ + +#define S3C_PA_IIC S5P6442_PA_IIC0 #define S3C_PA_WDT S5P6442_PA_WATCHDOG + +#define S5P_PA_CHIPID S5P6442_PA_CHIPID +#define S5P_PA_SDRAM S5P6442_PA_SDRAM +#define S5P_PA_SROMC S5P6442_PA_SROMC +#define S5P_PA_SYSCON S5P6442_PA_SYSCON +#define S5P_PA_TIMER S5P6442_PA_TIMER + +/* UART */ + #define S3C_PA_UART S5P6442_PA_UART -#define S3C_PA_IIC S5P6442_PA_IIC0 + +#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET)) +#define S5P_PA_UART0 S5P_PA_UART(0) +#define S5P_PA_UART1 S5P_PA_UART(1) +#define S5P_PA_UART2 S5P_PA_UART(2) + +#define S5P_SZ_UART SZ_256 #endif /* __ASM_ARCH_MAP_H */ -- cgit v1.2.3-18-g5258 From ede38875b4c3cf069eab49f4427a07333fcaae11 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Thu, 10 Feb 2011 10:57:03 +0900 Subject: ARM: S5P64X0: Cleanup map.h file Signed-off-by: Kukjin Kim --- arch/arm/mach-s5p64x0/include/mach/map.h | 83 ++++++++++++++++---------------- 1 file changed, 42 insertions(+), 41 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach-s5p64x0/include/mach/map.h index a9365e5ba61..95c91257c7c 100644 --- a/arch/arm/mach-s5p64x0/include/mach/map.h +++ b/arch/arm/mach-s5p64x0/include/mach/map.h @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s5p64x0/include/mach/map.h * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com * * S5P64X0 - Memory map definitions @@ -16,64 +16,46 @@ #include #include -#define S5P64X0_PA_SDRAM (0x20000000) +#define S5P64X0_PA_SDRAM 0x20000000 -#define S5P64X0_PA_CHIPID (0xE0000000) -#define S5P_PA_CHIPID S5P64X0_PA_CHIPID - -#define S5P64X0_PA_SYSCON (0xE0100000) -#define S5P_PA_SYSCON S5P64X0_PA_SYSCON - -#define S5P64X0_PA_GPIO (0xE0308000) - -#define S5P64X0_PA_VIC0 (0xE4000000) -#define S5P64X0_PA_VIC1 (0xE4100000) +#define S5P64X0_PA_CHIPID 0xE0000000 -#define S5P64X0_PA_SROMC (0xE7000000) -#define S5P_PA_SROMC S5P64X0_PA_SROMC - -#define S5P64X0_PA_PDMA (0xE9000000) - -#define S5P64X0_PA_TIMER (0xEA000000) -#define S5P_PA_TIMER S5P64X0_PA_TIMER +#define S5P64X0_PA_SYSCON 0xE0100000 -#define S5P64X0_PA_RTC (0xEA100000) +#define S5P64X0_PA_GPIO 0xE0308000 -#define S5P64X0_PA_WDT (0xEA200000) +#define S5P64X0_PA_VIC0 0xE4000000 +#define S5P64X0_PA_VIC1 0xE4100000 -#define S5P6440_PA_UART(x) (0xEC000000 + ((x) * S3C_UART_OFFSET)) -#define S5P6450_PA_UART(x) ((x < 5) ? (0xEC800000 + ((x) * S3C_UART_OFFSET)) : (0xEC000000)) +#define S5P64X0_PA_SROMC 0xE7000000 -#define S5P_PA_UART0 S5P6450_PA_UART(0) -#define S5P_PA_UART1 S5P6450_PA_UART(1) -#define S5P_PA_UART2 S5P6450_PA_UART(2) -#define S5P_PA_UART3 S5P6450_PA_UART(3) -#define S5P_PA_UART4 S5P6450_PA_UART(4) -#define S5P_PA_UART5 S5P6450_PA_UART(5) +#define S5P64X0_PA_PDMA 0xE9000000 -#define S5P_SZ_UART SZ_256 +#define S5P64X0_PA_TIMER 0xEA000000 +#define S5P64X0_PA_RTC 0xEA100000 +#define S5P64X0_PA_WDT 0xEA200000 -#define S5P6440_PA_IIC0 (0xEC104000) -#define S5P6440_PA_IIC1 (0xEC20F000) -#define S5P6450_PA_IIC0 (0xEC100000) -#define S5P6450_PA_IIC1 (0xEC200000) +#define S5P6440_PA_IIC0 0xEC104000 +#define S5P6440_PA_IIC1 0xEC20F000 +#define S5P6450_PA_IIC0 0xEC100000 +#define S5P6450_PA_IIC1 0xEC200000 -#define S5P64X0_PA_SPI0 (0xEC400000) -#define S5P64X0_PA_SPI1 (0xEC500000) +#define S5P64X0_PA_SPI0 0xEC400000 +#define S5P64X0_PA_SPI1 0xEC500000 -#define S5P64X0_PA_HSOTG (0xED100000) +#define S5P64X0_PA_HSOTG 0xED100000 #define S5P64X0_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000)) -#define S5P64X0_PA_I2S (0xF2000000) +#define S5P64X0_PA_I2S 0xF2000000 #define S5P6450_PA_I2S1 0xF2800000 #define S5P6450_PA_I2S2 0xF2900000 -#define S5P64X0_PA_PCM (0xF2100000) +#define S5P64X0_PA_PCM 0xF2100000 -#define S5P64X0_PA_ADC (0xF3000000) +#define S5P64X0_PA_ADC 0xF3000000 -/* compatibiltiy defines. */ +/* Compatibiltiy Defines */ #define S3C_PA_HSMMC0 S5P64X0_PA_HSMMC(0) #define S3C_PA_HSMMC1 S5P64X0_PA_HSMMC(1) @@ -83,6 +65,25 @@ #define S3C_PA_RTC S5P64X0_PA_RTC #define S3C_PA_WDT S5P64X0_PA_WDT +#define S5P_PA_CHIPID S5P64X0_PA_CHIPID +#define S5P_PA_SROMC S5P64X0_PA_SROMC +#define S5P_PA_SYSCON S5P64X0_PA_SYSCON +#define S5P_PA_TIMER S5P64X0_PA_TIMER + #define SAMSUNG_PA_ADC S5P64X0_PA_ADC +/* UART */ + +#define S5P6440_PA_UART(x) (0xEC000000 + ((x) * S3C_UART_OFFSET)) +#define S5P6450_PA_UART(x) ((x < 5) ? (0xEC800000 + ((x) * S3C_UART_OFFSET)) : (0xEC000000)) + +#define S5P_PA_UART0 S5P6450_PA_UART(0) +#define S5P_PA_UART1 S5P6450_PA_UART(1) +#define S5P_PA_UART2 S5P6450_PA_UART(2) +#define S5P_PA_UART3 S5P6450_PA_UART(3) +#define S5P_PA_UART4 S5P6450_PA_UART(4) +#define S5P_PA_UART5 S5P6450_PA_UART(5) + +#define S5P_SZ_UART SZ_256 + #endif /* __ASM_ARCH_MAP_H */ -- cgit v1.2.3-18-g5258 From 6236b97b9fa032057a9908ad16ff02c95feb3ad8 Mon Sep 17 00:00:00 2001 From: Thomas Abraham Date: Tue, 15 Feb 2011 14:35:47 +0900 Subject: ARM: S5P: Fix end address in memory resource information for UART devices For S5P platforms, the end address in memory resource information for UART devices is one byte more than the intended value. Fix this by reducing the end address by one byte. Signed-off-by: Thomas Abraham Signed-off-by: Kukjin Kim --- arch/arm/plat-s5p/dev-uart.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-s5p/dev-uart.c b/arch/arm/plat-s5p/dev-uart.c index 6a734288617..afaf87fdb93 100644 --- a/arch/arm/plat-s5p/dev-uart.c +++ b/arch/arm/plat-s5p/dev-uart.c @@ -28,7 +28,7 @@ static struct resource s5p_uart0_resource[] = { [0] = { .start = S5P_PA_UART0, - .end = S5P_PA_UART0 + S5P_SZ_UART, + .end = S5P_PA_UART0 + S5P_SZ_UART - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -51,7 +51,7 @@ static struct resource s5p_uart0_resource[] = { static struct resource s5p_uart1_resource[] = { [0] = { .start = S5P_PA_UART1, - .end = S5P_PA_UART1 + S5P_SZ_UART, + .end = S5P_PA_UART1 + S5P_SZ_UART - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -74,7 +74,7 @@ static struct resource s5p_uart1_resource[] = { static struct resource s5p_uart2_resource[] = { [0] = { .start = S5P_PA_UART2, - .end = S5P_PA_UART2 + S5P_SZ_UART, + .end = S5P_PA_UART2 + S5P_SZ_UART - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -98,7 +98,7 @@ static struct resource s5p_uart3_resource[] = { #if CONFIG_SERIAL_SAMSUNG_UARTS > 3 [0] = { .start = S5P_PA_UART3, - .end = S5P_PA_UART3 + S5P_SZ_UART, + .end = S5P_PA_UART3 + S5P_SZ_UART - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -123,7 +123,7 @@ static struct resource s5p_uart4_resource[] = { #if CONFIG_SERIAL_SAMSUNG_UARTS > 4 [0] = { .start = S5P_PA_UART4, - .end = S5P_PA_UART4 + S5P_SZ_UART, + .end = S5P_PA_UART4 + S5P_SZ_UART - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -148,7 +148,7 @@ static struct resource s5p_uart5_resource[] = { #if CONFIG_SERIAL_SAMSUNG_UARTS > 5 [0] = { .start = S5P_PA_UART5, - .end = S5P_PA_UART5 + S5P_SZ_UART, + .end = S5P_PA_UART5 + S5P_SZ_UART - 1, .flags = IORESOURCE_MEM, }, [1] = { -- cgit v1.2.3-18-g5258 From d11c217f1a8f9ea2b2c89b8a533396482a36e8c0 Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Wed, 2 Feb 2011 12:04:36 +0000 Subject: OMAP4: hwmod data: Add hwspinlock Add hwspinlock hwmod data for OMAP4 chip Signed-off-by: Cousson, Benoit Signed-off-by: Hari Kanigeri Signed-off-by: Ohad Ben-Cohen Cc: Paul Walmsley [b-cousson@ti.com: Move the data to keep the original order and add missing SIDLE_SMART_WKUP flag] --- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 65 +++++++++++++++++++++++++++++- 1 file changed, 64 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index c2806bd11fb..46da576ffaf 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -555,7 +555,6 @@ static struct omap_hwmod omap44xx_mpu_private_hwmod = { * sl2if * slimbus1 * slimbus2 - * spinlock * timer1 * timer10 * timer11 @@ -1638,6 +1637,67 @@ static struct omap_hwmod omap44xx_smartreflex_mpu_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; +/* + * 'spinlock' class + * spinlock provides hardware assistance for synchronizing the processes + * running on multiple processors + */ + +static struct omap_hwmod_class_sysconfig omap44xx_spinlock_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap44xx_spinlock_hwmod_class = { + .name = "spinlock", + .sysc = &omap44xx_spinlock_sysc, +}; + +/* spinlock */ +static struct omap_hwmod omap44xx_spinlock_hwmod; +static struct omap_hwmod_addr_space omap44xx_spinlock_addrs[] = { + { + .pa_start = 0x4a0f6000, + .pa_end = 0x4a0f6fff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_cfg -> spinlock */ +static struct omap_hwmod_ocp_if omap44xx_l4_cfg__spinlock = { + .master = &omap44xx_l4_cfg_hwmod, + .slave = &omap44xx_spinlock_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_spinlock_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_spinlock_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* spinlock slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_spinlock_slaves[] = { + &omap44xx_l4_cfg__spinlock, +}; + +static struct omap_hwmod omap44xx_spinlock_hwmod = { + .name = "spinlock", + .class = &omap44xx_spinlock_hwmod_class, + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_L4CFG_HW_SEM_CLKCTRL, + }, + }, + .slaves = omap44xx_spinlock_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_spinlock_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + /* * 'uart' class * universal asynchronous receiver/transmitter (uart) @@ -2058,6 +2118,9 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = { &omap44xx_smartreflex_iva_hwmod, &omap44xx_smartreflex_mpu_hwmod, + /* spinlock class */ + &omap44xx_spinlock_hwmod, + /* uart class */ &omap44xx_uart1_hwmod, &omap44xx_uart2_hwmod, -- cgit v1.2.3-18-g5258 From 08ec1130d4652ba1cab5ce0a423bcb2229c7a60b Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 17 Feb 2011 14:28:49 +0800 Subject: ARM: mx23: rename mx23 auart irq definition to align with mx28 i.MX23 Reference Manual names auart irq differently from i.MX28. This patch is to align the naming with mx28, so that some device registration codes can be shared. Signed-off-by: Shawn Guo Signed-off-by: Sascha Hauer --- arch/arm/mach-mxs/include/mach/mx23.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mxs/include/mach/mx23.h b/arch/arm/mach-mxs/include/mach/mx23.h index 9edd02ec8e3..4768402b948 100644 --- a/arch/arm/mach-mxs/include/mach/mx23.h +++ b/arch/arm/mach-mxs/include/mach/mx23.h @@ -101,9 +101,9 @@ #define MX23_INT_SSP2_DMA 20 #define MX23_INT_ECC8_IRQ 21 #define MX23_INT_RTC_ALARM 22 -#define MX23_INT_UARTAPP_TX_DMA 23 -#define MX23_INT_UARTAPP_INTERNAL 24 -#define MX23_INT_UARTAPP_RX_DMA 25 +#define MX23_INT_AUART1_TX_DMA 23 +#define MX23_INT_AUART1 24 +#define MX23_INT_AUART1_RX_DMA 25 #define MX23_INT_I2C_DMA 26 #define MX23_INT_I2C_ERROR 27 #define MX23_INT_TIMER0 28 @@ -135,9 +135,9 @@ #define MX23_INT_DCP 54 #define MX23_INT_BCH 56 #define MX23_INT_PXP 57 -#define MX23_INT_UARTAPP2_TX_DMA 58 -#define MX23_INT_UARTAPP2_INTERNAL 59 -#define MX23_INT_UARTAPP2_RX_DMA 60 +#define MX23_INT_AUART2_TX_DMA 58 +#define MX23_INT_AUART2 59 +#define MX23_INT_AUART2_RX_DMA 60 #define MX23_INT_VDAC_DETECT 61 #define MX23_INT_VDD5V_DROOP 64 #define MX23_INT_DCDC4P2_BO 65 -- cgit v1.2.3-18-g5258 From edca314f27c984f353a5129253d8d5241b82c517 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 17 Feb 2011 14:28:50 +0800 Subject: ARM: mx23: dynamically allocate mx23 auart device i.MX23 Reference Manaul starts auart index from 1 than 0. Changing the index to start from 0 requires corresponding changes on base address, irq, and iomux definitions, and will probably confuse people who reads codes and hardware documents together. This patch introduced the field 'hwid' to distinguish the driver id and controller id. These two ids are different on mx23 while identical on mx28. Signed-off-by: Shawn Guo Signed-off-by: Sascha Hauer --- arch/arm/mach-mxs/clock-mx23.c | 1 + arch/arm/mach-mxs/devices-mx23.h | 5 +++++ arch/arm/mach-mxs/devices/platform-auart.c | 22 ++++++++++++++++------ 3 files changed, 22 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c index ca72a05ed9c..7c5dace92b9 100644 --- a/arch/arm/mach-mxs/clock-mx23.c +++ b/arch/arm/mach-mxs/clock-mx23.c @@ -442,6 +442,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("duart", "apb_pclk", xbus_clk) /* for amba-pl011 driver */ _REGISTER_CLOCK("duart", NULL, uart_clk) + _REGISTER_CLOCK("mxs-auart.0", NULL, uart_clk) _REGISTER_CLOCK("rtc", NULL, rtc_clk) _REGISTER_CLOCK(NULL, "hclk", hbus_clk) _REGISTER_CLOCK(NULL, "usb", usb_clk) diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h index 1256788561d..c4d4773d3e8 100644 --- a/arch/arm/mach-mxs/devices-mx23.h +++ b/arch/arm/mach-mxs/devices-mx23.h @@ -14,3 +14,8 @@ extern const struct amba_device mx23_duart_device __initconst; #define mx23_add_duart() \ mxs_add_duart(&mx23_duart_device) + +extern const struct mxs_auart_data mx23_auart_data[] __initconst; +#define mx23_add_auart(id) mxs_add_auart(&mx23_auart_data[id]) +#define mx23_add_auart0() mx23_add_auart(0) +#define mx23_add_auart1() mx23_add_auart(1) diff --git a/arch/arm/mach-mxs/devices/platform-auart.c b/arch/arm/mach-mxs/devices/platform-auart.c index f0dbf8a2145..796606cce0c 100644 --- a/arch/arm/mach-mxs/devices/platform-auart.c +++ b/arch/arm/mach-mxs/devices/platform-auart.c @@ -7,23 +7,33 @@ * Free Software Foundation. */ #include +#include #include #include -#define mxs_auart_data_entry_single(soc, _id) \ +#define mxs_auart_data_entry_single(soc, _id, hwid) \ { \ .id = _id, \ - .iobase = soc ## _AUART ## _id ## _BASE_ADDR, \ - .irq = soc ## _INT_AUART ## _id, \ + .iobase = soc ## _AUART ## hwid ## _BASE_ADDR, \ + .irq = soc ## _INT_AUART ## hwid, \ } -#define mxs_auart_data_entry(soc, _id) \ - [_id] = mxs_auart_data_entry_single(soc, _id) +#define mxs_auart_data_entry(soc, _id, hwid) \ + [_id] = mxs_auart_data_entry_single(soc, _id, hwid) + +#ifdef CONFIG_SOC_IMX23 +const struct mxs_auart_data mx23_auart_data[] __initconst = { +#define mx23_auart_data_entry(_id, hwid) \ + mxs_auart_data_entry(MX23, _id, hwid) + mx23_auart_data_entry(0, 1), + mx23_auart_data_entry(1, 2), +}; +#endif #ifdef CONFIG_SOC_IMX28 const struct mxs_auart_data mx28_auart_data[] __initconst = { #define mx28_auart_data_entry(_id) \ - mxs_auart_data_entry(MX28, _id) + mxs_auart_data_entry(MX28, _id, _id) mx28_auart_data_entry(0), mx28_auart_data_entry(1), mx28_auart_data_entry(2), -- cgit v1.2.3-18-g5258 From 2e8acbc28314ce1a0f9cc65a7e76bd24595a6bad Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 17 Feb 2011 14:28:51 +0800 Subject: ARM: mxs/mx23evk: add auart device Signed-off-by: Shawn Guo Signed-off-by: Sascha Hauer --- arch/arm/mach-mxs/Kconfig | 1 + arch/arm/mach-mxs/mach-mx23evk.c | 11 +++++++++++ 2 files changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index cd2fbdfc37e..3c5ce09b870 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -19,6 +19,7 @@ config MACH_MX23EVK bool "Support MX23EVK Platform" select SOC_IMX23 select MXS_HAVE_AMBA_DUART + select MXS_HAVE_PLATFORM_AUART default y help Include support for MX23EVK platform. This includes specific diff --git a/arch/arm/mach-mxs/mach-mx23evk.c b/arch/arm/mach-mxs/mach-mx23evk.c index aa0640052f5..0737ce2e6cf 100644 --- a/arch/arm/mach-mxs/mach-mx23evk.c +++ b/arch/arm/mach-mxs/mach-mx23evk.c @@ -30,6 +30,16 @@ static const iomux_cfg_t mx23evk_pads[] __initconst = { /* duart */ MX23_PAD_PWM0__DUART_RX | MXS_PAD_4MA, MX23_PAD_PWM1__DUART_TX | MXS_PAD_4MA, + + /* auart */ + MX23_PAD_AUART1_RX__AUART1_RX | + (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + MX23_PAD_AUART1_TX__AUART1_TX | + (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + MX23_PAD_AUART1_CTS__AUART1_CTS | + (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + MX23_PAD_AUART1_RTS__AUART1_RTS | + (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), }; static void __init mx23evk_init(void) @@ -37,6 +47,7 @@ static void __init mx23evk_init(void) mxs_iomux_setup_multiple_pads(mx23evk_pads, ARRAY_SIZE(mx23evk_pads)); mx23_add_duart(); + mx23_add_auart0(); } static void __init mx23evk_timer_init(void) -- cgit v1.2.3-18-g5258 From 15808182ae8044a064286445bcecaee6105cd718 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 17 Feb 2011 14:28:52 +0800 Subject: ARM: mxs/mx28evk: add auart devices Signed-off-by: Shawn Guo Signed-off-by: Sascha Hauer --- arch/arm/mach-mxs/Kconfig | 1 + arch/arm/mach-mxs/mach-mx28evk.c | 21 +++++++++++++++++++++ 2 files changed, 22 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index 3c5ce09b870..55bf075add9 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -29,6 +29,7 @@ config MACH_MX28EVK bool "Support MX28EVK Platform" select SOC_IMX28 select MXS_HAVE_AMBA_DUART + select MXS_HAVE_PLATFORM_AUART select MXS_HAVE_PLATFORM_FEC select MXS_OCOTP default y diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c index e8db99fabc4..1f0b708138f 100644 --- a/arch/arm/mach-mxs/mach-mx28evk.c +++ b/arch/arm/mach-mxs/mach-mx28evk.c @@ -38,6 +38,25 @@ static const iomux_cfg_t mx28evk_pads[] __initconst = { MX28_PAD_PWM1__DUART_TX | (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + /* auart0 */ + MX28_PAD_AUART0_RX__AUART0_RX | + (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + MX28_PAD_AUART0_TX__AUART0_TX | + (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + MX28_PAD_AUART0_CTS__AUART0_CTS | + (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + MX28_PAD_AUART0_RTS__AUART0_RTS | + (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + /* auart3 */ + MX28_PAD_AUART3_RX__AUART3_RX | + (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + MX28_PAD_AUART3_TX__AUART3_TX | + (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + MX28_PAD_AUART3_CTS__AUART3_CTS | + (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + MX28_PAD_AUART3_RTS__AUART3_RTS | + (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + /* fec0 */ MX28_PAD_ENET0_MDC__ENET0_MDC | (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), @@ -164,6 +183,8 @@ static void __init mx28evk_init(void) mxs_iomux_setup_multiple_pads(mx28evk_pads, ARRAY_SIZE(mx28evk_pads)); mx28_add_duart(); + mx28_add_auart0(); + mx28_add_auart3(); if (mx28evk_fec_get_mac()) pr_warn("%s: failed on fec mac setup\n", __func__); -- cgit v1.2.3-18-g5258 From 03e3b5a0f18c53560de1984fbbfca146d31da2a5 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 17 Feb 2011 13:13:56 +0100 Subject: [S390] atomic: use ACCESS_ONCE() for atomic_read() Let's make atomic_read() and atomic_set() behave like on all/most other architectures. Generated code is identical with gcc 4.5.2. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/atomic.h | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h index 76daea11718..50cfb5ed601 100644 --- a/arch/s390/include/asm/atomic.h +++ b/arch/s390/include/asm/atomic.h @@ -36,14 +36,12 @@ static inline int atomic_read(const atomic_t *v) { - barrier(); - return v->counter; + return ACCESS_ONCE(v->counter); } static inline void atomic_set(atomic_t *v, int i) { v->counter = i; - barrier(); } static inline int atomic_add_return(int i, atomic_t *v) @@ -128,14 +126,12 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u) static inline long long atomic64_read(const atomic64_t *v) { - barrier(); - return v->counter; + return ACCESS_ONCE(v->counter); } static inline void atomic64_set(atomic64_t *v, long long i) { v->counter = i; - barrier(); } static inline long long atomic64_add_return(long long i, atomic64_t *v) -- cgit v1.2.3-18-g5258 From a8c8d7c683419d059e302373afc6998244f5f60f Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 17 Feb 2011 13:13:57 +0100 Subject: [S390] correct ipl parameter block safe guard The 'output' variable is passed from decompress_kernel to check_ipl_parmblock before it is initialized. That disables the safe guard against the overwrite of the ipl parameter block. Fix this by passing the correct value to check_ipl_parmblock. Reported-by: David Binderman Signed-off-by: Martin Schwidefsky --- arch/s390/boot/compressed/misc.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/s390/boot/compressed/misc.c b/arch/s390/boot/compressed/misc.c index 0851eb1e919..2751b3a8a66 100644 --- a/arch/s390/boot/compressed/misc.c +++ b/arch/s390/boot/compressed/misc.c @@ -133,11 +133,12 @@ unsigned long decompress_kernel(void) unsigned long output_addr; unsigned char *output; - check_ipl_parmblock((void *) 0, (unsigned long) output + SZ__bss_start); + output_addr = ((unsigned long) &_end + HEAP_SIZE + 4095UL) & -4096UL; + check_ipl_parmblock((void *) 0, output_addr + SZ__bss_start); memset(&_bss, 0, &_ebss - &_bss); free_mem_ptr = (unsigned long)&_end; free_mem_end_ptr = free_mem_ptr + HEAP_SIZE; - output = (unsigned char *) ((free_mem_end_ptr + 4095UL) & -4096UL); + output = (unsigned char *) output_addr; #ifdef CONFIG_BLK_DEV_INITRD /* -- cgit v1.2.3-18-g5258 From 7657e41a0bd16c9d8b3cefe8fd5d6ac3c25ae4bf Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 17 Feb 2011 13:13:58 +0100 Subject: [S390] atomic: use inline asm Use inline assemblies for atomic_read/set(). This way there shouldn't be any questions or subtle volatile semantics left. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/atomic.h | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h index 50cfb5ed601..5c5ba10384c 100644 --- a/arch/s390/include/asm/atomic.h +++ b/arch/s390/include/asm/atomic.h @@ -36,12 +36,19 @@ static inline int atomic_read(const atomic_t *v) { - return ACCESS_ONCE(v->counter); + int c; + + asm volatile( + " l %0,%1\n" + : "=d" (c) : "Q" (v->counter)); + return c; } static inline void atomic_set(atomic_t *v, int i) { - v->counter = i; + asm volatile( + " st %1,%0\n" + : "=Q" (v->counter) : "d" (i)); } static inline int atomic_add_return(int i, atomic_t *v) @@ -126,12 +133,19 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u) static inline long long atomic64_read(const atomic64_t *v) { - return ACCESS_ONCE(v->counter); + long long c; + + asm volatile( + " lg %0,%1\n" + : "=d" (c) : "Q" (v->counter)); + return c; } static inline void atomic64_set(atomic64_t *v, long long i) { - v->counter = i; + asm volatile( + " stg %1,%0\n" + : "=Q" (v->counter) : "d" (i)); } static inline long long atomic64_add_return(long long i, atomic64_t *v) -- cgit v1.2.3-18-g5258 From dd30ac327481f1663b6526fa9fa078569188b7cc Mon Sep 17 00:00:00 2001 From: Horst Hartmann Date: Thu, 17 Feb 2011 13:13:59 +0100 Subject: [S390] net: provide architecture specific NET_SKB_PAD NET_SKB_PAD has been increased from 32 to 64 and later to max(32, L1_CACHE_BYTES). This led to a 25% throughput decrease for streaming workloads accompanied by a 37% CPU cost increase on s390. Define a architecture specific NET_SKB_PAD with the old value of 32. Signed-off-by: Horst Hartmann Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/cache.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/s390/include/asm/cache.h b/arch/s390/include/asm/cache.h index 24aafa68b64..2a30d5ac066 100644 --- a/arch/s390/include/asm/cache.h +++ b/arch/s390/include/asm/cache.h @@ -13,6 +13,7 @@ #define L1_CACHE_BYTES 256 #define L1_CACHE_SHIFT 8 +#define NET_SKB_PAD 32 #define __read_mostly __attribute__((__section__(".data..read_mostly"))) -- cgit v1.2.3-18-g5258 From 0e25a5c98067286fc727cf142fc0dadf95790921 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Tue, 8 Feb 2011 09:24:36 +0530 Subject: ARM: perf_event: allow platform-specific interrupt handler Allow a platform-specific IRQ handler to be specified via platform data. This will be used to implement the single-irq workaround for the DB8500. Signed-off-by: Rabin Vincent Acked-by: Lee Jones Acked-by: Will Deacon Signed-off-by: Linus Walleij --- arch/arm/include/asm/pmu.h | 14 ++++++++++++++ arch/arm/kernel/perf_event.c | 17 ++++++++++++++++- 2 files changed, 30 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h index 8ccea012722..7544ce6b481 100644 --- a/arch/arm/include/asm/pmu.h +++ b/arch/arm/include/asm/pmu.h @@ -12,11 +12,25 @@ #ifndef __ARM_PMU_H__ #define __ARM_PMU_H__ +#include + enum arm_pmu_type { ARM_PMU_DEVICE_CPU = 0, ARM_NUM_PMU_DEVICES, }; +/* + * struct arm_pmu_platdata - ARM PMU platform data + * + * @handle_irq: an optional handler which will be called from the interrupt and + * passed the address of the low level handler, and can be used to implement + * any platform specific handling before or after calling it. + */ +struct arm_pmu_platdata { + irqreturn_t (*handle_irq)(int irq, void *dev, + irq_handler_t pmu_handler); +}; + #ifdef CONFIG_CPU_HAS_PMU /** diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 5efa2647a2f..32395119128 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -377,9 +377,18 @@ validate_group(struct perf_event *event) return 0; } +static irqreturn_t armpmu_platform_irq(int irq, void *dev) +{ + struct arm_pmu_platdata *plat = dev_get_platdata(&pmu_device->dev); + + return plat->handle_irq(irq, dev, armpmu->handle_irq); +} + static int armpmu_reserve_hardware(void) { + struct arm_pmu_platdata *plat; + irq_handler_t handle_irq; int i, err = -ENODEV, irq; pmu_device = reserve_pmu(ARM_PMU_DEVICE_CPU); @@ -390,6 +399,12 @@ armpmu_reserve_hardware(void) init_pmu(ARM_PMU_DEVICE_CPU); + plat = dev_get_platdata(&pmu_device->dev); + if (plat && plat->handle_irq) + handle_irq = armpmu_platform_irq; + else + handle_irq = armpmu->handle_irq; + if (pmu_device->num_resources < 1) { pr_err("no irqs for PMUs defined\n"); return -ENODEV; @@ -400,7 +415,7 @@ armpmu_reserve_hardware(void) if (irq < 0) continue; - err = request_irq(irq, armpmu->handle_irq, + err = request_irq(irq, handle_irq, IRQF_DISABLED | IRQF_NOBALANCING, "armpmu", NULL); if (err) { -- cgit v1.2.3-18-g5258 From aa90eb9d9d39d6e312b822cfa1512bb76e0e1df3 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Tue, 8 Feb 2011 09:24:37 +0530 Subject: mach-ux500: DB8500 PMU support DB8500 has irqs from two cores ORed into one. Implement a workaround to handle this by bouncing the interrupt by setting the affinity to the other core when the interrupt appears to be spurious on the current core. Signed-off-by: Rabin Vincent Acked-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/cpu-db8500.c | 51 ++++++++++++++++++++++++++++++++++++---- 1 file changed, 47 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 1748fbc5853..5c0fabf5fa0 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -12,22 +12,20 @@ #include #include #include +#include #include #include #include #include #include +#include #include #include #include #include "devices-db8500.h" -static struct platform_device *platform_devs[] __initdata = { - &u8500_dma40_device, -}; - /* minimum static i/o mapping required to boot U8500 platforms */ static struct map_desc u8500_uart_io_desc[] __initdata = { __IO_DEV_DESC(U8500_UART0_BASE, SZ_4K), @@ -89,6 +87,51 @@ void __init u8500_map_io(void) iotable_init(u8500_v2_io_desc, ARRAY_SIZE(u8500_v2_io_desc)); } +static struct resource db8500_pmu_resources[] = { + [0] = { + .start = IRQ_DB8500_PMU, + .end = IRQ_DB8500_PMU, + .flags = IORESOURCE_IRQ, + }, +}; + +/* + * The PMU IRQ lines of two cores are wired together into a single interrupt. + * Bounce the interrupt to the other core if it's not ours. + */ +static irqreturn_t db8500_pmu_handler(int irq, void *dev, irq_handler_t handler) +{ + irqreturn_t ret = handler(irq, dev); + int other = !smp_processor_id(); + + if (ret == IRQ_NONE && cpu_online(other)) + irq_set_affinity(irq, cpumask_of(other)); + + /* + * We should be able to get away with the amount of IRQ_NONEs we give, + * while still having the spurious IRQ detection code kick in if the + * interrupt really starts hitting spuriously. + */ + return ret; +} + +static struct arm_pmu_platdata db8500_pmu_platdata = { + .handle_irq = db8500_pmu_handler, +}; + +static struct platform_device db8500_pmu_device = { + .name = "arm-pmu", + .id = ARM_PMU_DEVICE_CPU, + .num_resources = ARRAY_SIZE(db8500_pmu_resources), + .resource = db8500_pmu_resources, + .dev.platform_data = &db8500_pmu_platdata, +}; + +static struct platform_device *platform_devs[] __initdata = { + &u8500_dma40_device, + &db8500_pmu_device, +}; + static resource_size_t __initdata db8500_gpio_base[] = { U8500_GPIOBANK0_BASE, U8500_GPIOBANK1_BASE, -- cgit v1.2.3-18-g5258 From da1016df85ed67b6f7dbb765532c54bc35ba08d7 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Wed, 16 Feb 2011 23:48:35 +0900 Subject: x86: Use bitmap library functions Use bitmap_set()/bitmap_clear() to fill/zero a region of a bitmap instead of doing set_bit()/clear_bit() each bit. This change has been tested with ioperm() and there's no change in behavior. Signed-off-by: Akinobu Mita LKML-Reference: <1297867715-20394-1-git-send-email-akinobu.mita@gmail.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/ioport.c | 20 +++++--------------- 1 file changed, 5 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/ioport.c b/arch/x86/kernel/ioport.c index 8eec0ec59af..8c968974253 100644 --- a/arch/x86/kernel/ioport.c +++ b/arch/x86/kernel/ioport.c @@ -14,22 +14,9 @@ #include #include #include +#include #include -/* Set EXTENT bits starting at BASE in BITMAP to value TURN_ON. */ -static void set_bitmap(unsigned long *bitmap, unsigned int base, - unsigned int extent, int new_value) -{ - unsigned int i; - - for (i = base; i < base + extent; i++) { - if (new_value) - __set_bit(i, bitmap); - else - __clear_bit(i, bitmap); - } -} - /* * this changes the io permissions bitmap in the current task. */ @@ -69,7 +56,10 @@ asmlinkage long sys_ioperm(unsigned long from, unsigned long num, int turn_on) */ tss = &per_cpu(init_tss, get_cpu()); - set_bitmap(t->io_bitmap_ptr, from, num, !turn_on); + if (turn_on) + bitmap_clear(t->io_bitmap_ptr, from, num); + else + bitmap_set(t->io_bitmap_ptr, from, num); /* * Search for a (possibly new) maximum. This is simple and stupid, -- cgit v1.2.3-18-g5258 From 2ca230baeb7c61864cab9b53e37a3da28a2ca7e5 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 17 Feb 2011 14:46:37 +0100 Subject: x86-64, NUMA: Don't call __pa() with invalid address in numa_reset_distance() Do not call __pa(numa_distance) if it was not allocated before. Calling with invalid address triggers VIRTUAL_BUG_ON() in __phys_addr() if CONFIG_DEBUG_VIRTUAL. Also reported by Ingo. http://thread.gmane.org/gmane.linux.kernel/1101306/focus=1101785 - v2: Change to check existing path as tj requested. - tj: Description update. Signed-off-by: Yinghai Lu Signed-off-by: Tejun Heo Reported-by: Ingo Molnar --- arch/x86/mm/numa_64.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index 8ce61773590..1bd6de4aa71 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -371,11 +371,13 @@ static void __init numa_reset_distance(void) { size_t size; - size = numa_distance_cnt * sizeof(numa_distance[0]); - memblock_x86_free_range(__pa(numa_distance), - __pa(numa_distance) + size); + if (numa_distance_cnt) { + size = numa_distance_cnt * sizeof(numa_distance[0]); + memblock_x86_free_range(__pa(numa_distance), + __pa(numa_distance) + size); + numa_distance_cnt = 0; + } numa_distance = NULL; - numa_distance_cnt = 0; } /* -- cgit v1.2.3-18-g5258 From 6d496f9f232790d44144f3784856290e0b27b8f3 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 17 Feb 2011 14:53:20 +0100 Subject: x86-64, NUMA: Put dummy_numa_init() in the init section dummy_numa_init() is used only during system boot. Put it in .init like other NUMA init functions. - tj: Description update. Signed-off-by: Yinghai Lu Signed-off-by: Tejun Heo --- arch/x86/mm/numa_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index 1bd6de4aa71..f6d85e38047 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -899,7 +899,7 @@ static bool __init numa_emulation(void) } #endif /* CONFIG_NUMA_EMU */ -static int dummy_numa_init(void) +static int __init dummy_numa_init(void) { printk(KERN_INFO "%s\n", numa_off ? "NUMA turned off" : "No NUMA configuration found"); -- cgit v1.2.3-18-g5258 From fe5a4901c20c09b4380b7d4a0197efb6489c4ce8 Mon Sep 17 00:00:00 2001 From: Hema HK Date: Wed, 16 Feb 2011 17:34:40 +0530 Subject: usb: musb: AM35x: moving internal phy functions out of usb_musb.c file Moved all the board specific internal PHY functions out of usb_musb.c file as this file is shared between the OMAP2+ and AM35xx platforms. There exists a file which has the functions specific to internal PHY used for OMAP4 platform. Moved all phy specific functions to this file and passing these functions through board data in the board file. Signed-off-by: Hema HK Cc: Paul Walmsley Cc: Tony Lindgren Signed-off-by: Felipe Balbi --- arch/arm/mach-omap2/Makefile | 3 +- arch/arm/mach-omap2/board-am3517evm.c | 4 ++ arch/arm/mach-omap2/omap_phy_internal.c | 93 +++++++++++++++++++++++++++++++ arch/arm/mach-omap2/usb-musb.c | 97 --------------------------------- arch/arm/plat-omap/include/plat/usb.h | 4 ++ 5 files changed, 103 insertions(+), 98 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 1c0c2b02d87..43d4e14d0ec 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -218,7 +218,8 @@ obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o \ hsmmc.o \ omap_phy_internal.o -obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o +obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o \ + omap_phy_internal.o \ obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 10d60b7743c..3413bf993c7 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -409,6 +409,10 @@ static struct omap_musb_board_data musb_board_data = { .interface_type = MUSB_INTERFACE_ULPI, .mode = MUSB_OTG, .power = 500, + .set_phy_power = am35x_musb_phy_power, + .clear_irq = am35x_musb_clear_irq, + .set_mode = am35x_musb_set_mode, + .reset = am35x_musb_reset, }; static __init void am3517_evm_musb_init(void) diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index 745252c60e3..f172ec06c06 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -29,6 +29,7 @@ #include #include +#include "control.h" /* OMAP control module register for UTMI PHY */ #define CONTROL_DEV_CONF 0x300 @@ -147,3 +148,95 @@ int omap4430_phy_exit(struct device *dev) return 0; } + +void am35x_musb_reset(void) +{ + u32 regval; + + /* Reset the musb interface */ + regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); + + regval |= AM35XX_USBOTGSS_SW_RST; + omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET); + + regval &= ~AM35XX_USBOTGSS_SW_RST; + omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET); + + regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); +} + +void am35x_musb_phy_power(u8 on) +{ + unsigned long timeout = jiffies + msecs_to_jiffies(100); + u32 devconf2; + + if (on) { + /* + * Start the on-chip PHY and its PLL. + */ + devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2); + + devconf2 &= ~(CONF2_RESET | CONF2_PHYPWRDN | CONF2_OTGPWRDN); + devconf2 |= CONF2_PHY_PLLON; + + omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2); + + pr_info(KERN_INFO "Waiting for PHY clock good...\n"); + while (!(omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2) + & CONF2_PHYCLKGD)) { + cpu_relax(); + + if (time_after(jiffies, timeout)) { + pr_err(KERN_ERR "musb PHY clock good timed out\n"); + break; + } + } + } else { + /* + * Power down the on-chip PHY. + */ + devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2); + + devconf2 &= ~CONF2_PHY_PLLON; + devconf2 |= CONF2_PHYPWRDN | CONF2_OTGPWRDN; + omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2); + } +} + +void am35x_musb_clear_irq(void) +{ + u32 regval; + + regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); + regval |= AM35XX_USBOTGSS_INT_CLR; + omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR); + regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); +} + +void am35x_musb_set_mode(u8 musb_mode) +{ + u32 devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2); + + devconf2 &= ~CONF2_OTGMODE; + switch (musb_mode) { +#ifdef CONFIG_USB_MUSB_HDRC_HCD + case MUSB_HOST: /* Force VBUS valid, ID = 0 */ + devconf2 |= CONF2_FORCE_HOST; + break; +#endif +#ifdef CONFIG_USB_GADGET_MUSB_HDRC + case MUSB_PERIPHERAL: /* Force VBUS valid, ID = 1 */ + devconf2 |= CONF2_FORCE_DEVICE; + break; +#endif +#ifdef CONFIG_USB_MUSB_OTG + case MUSB_OTG: /* Don't override the VBUS/ID comparators */ + devconf2 |= CONF2_NO_OVERRIDE; + break; +#endif + default: + pr_info(KERN_INFO "Unsupported mode %u\n", musb_mode); + } + + omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2); +} diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index 5298949d4b1..9107883287f 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -30,102 +30,9 @@ #include #include #include -#include "control.h" #if defined(CONFIG_USB_MUSB_OMAP2PLUS) || defined (CONFIG_USB_MUSB_AM35X) -static void am35x_musb_reset(void) -{ - u32 regval; - - /* Reset the musb interface */ - regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); - - regval |= AM35XX_USBOTGSS_SW_RST; - omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET); - - regval &= ~AM35XX_USBOTGSS_SW_RST; - omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET); - - regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); -} - -static void am35x_musb_phy_power(u8 on) -{ - unsigned long timeout = jiffies + msecs_to_jiffies(100); - u32 devconf2; - - if (on) { - /* - * Start the on-chip PHY and its PLL. - */ - devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2); - - devconf2 &= ~(CONF2_RESET | CONF2_PHYPWRDN | CONF2_OTGPWRDN); - devconf2 |= CONF2_PHY_PLLON; - - omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2); - - pr_info(KERN_INFO "Waiting for PHY clock good...\n"); - while (!(omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2) - & CONF2_PHYCLKGD)) { - cpu_relax(); - - if (time_after(jiffies, timeout)) { - pr_err(KERN_ERR "musb PHY clock good timed out\n"); - break; - } - } - } else { - /* - * Power down the on-chip PHY. - */ - devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2); - - devconf2 &= ~CONF2_PHY_PLLON; - devconf2 |= CONF2_PHYPWRDN | CONF2_OTGPWRDN; - omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2); - } -} - -static void am35x_musb_clear_irq(void) -{ - u32 regval; - - regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); - regval |= AM35XX_USBOTGSS_INT_CLR; - omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR); - regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); -} - -static void am35x_musb_set_mode(u8 musb_mode) -{ - u32 devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2); - - devconf2 &= ~CONF2_OTGMODE; - switch (musb_mode) { -#ifdef CONFIG_USB_MUSB_HDRC_HCD - case MUSB_HOST: /* Force VBUS valid, ID = 0 */ - devconf2 |= CONF2_FORCE_HOST; - break; -#endif -#ifdef CONFIG_USB_GADGET_MUSB_HDRC - case MUSB_PERIPHERAL: /* Force VBUS valid, ID = 1 */ - devconf2 |= CONF2_FORCE_DEVICE; - break; -#endif -#ifdef CONFIG_USB_MUSB_OTG - case MUSB_OTG: /* Don't override the VBUS/ID comparators */ - devconf2 |= CONF2_NO_OVERRIDE; - break; -#endif - default: - pr_info(KERN_INFO "Unsupported mode %u\n", musb_mode); - } - - omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2); -} - static struct resource musb_resources[] = { [0] = { /* start and end set dynamically */ .flags = IORESOURCE_MEM, @@ -189,10 +96,6 @@ void __init usb_musb_init(struct omap_musb_board_data *board_data) musb_device.name = "musb-am35x"; musb_resources[0].start = AM35XX_IPSS_USBOTGSS_BASE; musb_resources[1].start = INT_35XX_USBOTG_IRQ; - board_data->set_phy_power = am35x_musb_phy_power; - board_data->clear_irq = am35x_musb_clear_irq; - board_data->set_mode = am35x_musb_set_mode; - board_data->reset = am35x_musb_reset; } else if (cpu_is_omap34xx()) { musb_resources[0].start = OMAP34XX_HSUSB_OTG_BASE; } else if (cpu_is_omap44xx()) { diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index 450a332f100..077192759af 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -91,6 +91,10 @@ extern int omap4430_phy_exit(struct device *dev); #endif +extern void am35x_musb_reset(void); +extern void am35x_musb_phy_power(u8 on); +extern void am35x_musb_clear_irq(void); +extern void am35x_musb_set_mode(u8 musb_mode); /* * FIXME correct answer depends on hmc_mode, -- cgit v1.2.3-18-g5258 From 2aae4221eebf926ad1058546e2cb81dae8f3e696 Mon Sep 17 00:00:00 2001 From: Anand Gadiyar Date: Wed, 16 Feb 2011 15:42:15 +0530 Subject: arm: omap4: usb: explicitly configure MUSB pads Use the mux framework APIs to explicitly configure the MUSB pads. The MUSB controller in OMAP4 can use either the old ULPI interface, or the new internal PHY. Configure the pads accordingly. Signed-off-by: Anand Gadiyar Cc: Tony Lindgren Signed-off-by: Felipe Balbi --- arch/arm/mach-omap2/usb-musb.c | 40 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index 9107883287f..9788b494185 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -30,6 +30,7 @@ #include #include #include +#include "mux.h" #if defined(CONFIG_USB_MUSB_OMAP2PLUS) || defined (CONFIG_USB_MUSB_AM35X) @@ -88,6 +89,43 @@ static struct platform_device musb_device = { .resource = musb_resources, }; +static void usb_musb_mux_init(struct omap_musb_board_data *board_data) +{ + switch (board_data->interface_type) { + case MUSB_INTERFACE_UTMI: + omap_mux_init_signal("usba0_otg_dp", OMAP_PIN_INPUT); + omap_mux_init_signal("usba0_otg_dm", OMAP_PIN_INPUT); + break; + case MUSB_INTERFACE_ULPI: + omap_mux_init_signal("usba0_ulpiphy_clk", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usba0_ulpiphy_stp", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usba0_ulpiphy_dir", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usba0_ulpiphy_nxt", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usba0_ulpiphy_dat0", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usba0_ulpiphy_dat1", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usba0_ulpiphy_dat2", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usba0_ulpiphy_dat3", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usba0_ulpiphy_dat4", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usba0_ulpiphy_dat5", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usba0_ulpiphy_dat6", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usba0_ulpiphy_dat7", + OMAP_PIN_INPUT_PULLDOWN); + break; + default: + break; + } +} void __init usb_musb_init(struct omap_musb_board_data *board_data) { if (cpu_is_omap243x()) { @@ -102,6 +140,8 @@ void __init usb_musb_init(struct omap_musb_board_data *board_data) musb_resources[0].start = OMAP44XX_HSUSB_OTG_BASE; musb_resources[1].start = OMAP44XX_IRQ_HS_USB_MC_N; musb_resources[2].start = OMAP44XX_IRQ_HS_USB_DMA_N; + + usb_musb_mux_init(board_data); } musb_resources[0].end = musb_resources[0].start + SZ_4K - 1; -- cgit v1.2.3-18-g5258 From 1dbea0f5e23b6c647db72fa4a048cb7140625e13 Mon Sep 17 00:00:00 2001 From: Anand Gadiyar Date: Wed, 16 Feb 2011 16:47:19 +0530 Subject: arm: omap4: 4430sdp: drop ehci support Most revisions of the OMAP4 Blaze/SDP platform do not have the EHCI signals routed by default. The pads are routed for the alternate HSI functionality instead, and explicit board modifications are needed to route the signals to the USB PHY on the board. Also, turning on the PHY connected to the EHCI port causes a board reboot during bootup due to an unintended short on the rails - this affects many initial revisions of the board, and needs a minor board mod to fix (or as a workaround, one should not attempt to power on the USB PHY). Given that these boards need explicit board mods to even get EHCI working (separate from the accidental short above), we should not attempt to enable EHCI by default. So drop the EHCI support from the board files for the Blaze/SDP platforms. Signed-off-by: Anand Gadiyar Cc: Keshava Munegowda Cc: Tony Lindgren Signed-off-by: Felipe Balbi --- arch/arm/mach-omap2/board-4430sdp.c | 19 ------------------- 1 file changed, 19 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 07d1b20b114..674c183f813 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -44,7 +44,6 @@ #define ETH_KS8851_IRQ 34 #define ETH_KS8851_POWER_ON 48 #define ETH_KS8851_QUART 138 -#define OMAP4SDP_MDM_PWR_EN_GPIO 157 #define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO 184 #define OMAP4_SFH7741_ENABLE_GPIO 188 @@ -251,16 +250,6 @@ static void __init omap_4430sdp_init_irq(void) gic_init_irq(); } -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .phy_reset = false, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = -EINVAL, - .reset_gpio_port[2] = -EINVAL, -}; - static struct omap_musb_board_data musb_board_data = { .interface_type = MUSB_INTERFACE_UTMI, .mode = MUSB_OTG, @@ -576,14 +565,6 @@ static void __init omap_4430sdp_init(void) omap_serial_init(); omap4_twl6030_hsmmc_init(mmc); - /* Power on the ULPI PHY */ - status = gpio_request(OMAP4SDP_MDM_PWR_EN_GPIO, "USBB1 PHY VMDM_3V3"); - if (status) - pr_err("%s: Could not get USBB1 PHY GPIO\n", __func__); - else - gpio_direction_output(OMAP4SDP_MDM_PWR_EN_GPIO, 1); - - usb_ehci_init(&ehci_pdata); usb_musb_init(&musb_board_data); status = omap_ethernet_init(); -- cgit v1.2.3-18-g5258 From 44d02acf54114e4d5c905b6b1a6473a7d302312d Mon Sep 17 00:00:00 2001 From: Hema HK Date: Thu, 17 Feb 2011 12:07:17 +0530 Subject: OMAP2430: hwmod data: Add USBOTG OMAP2430 hwmod data structures are populated with base address, L3 and L4 interface clocks, IRQs and sysconfig register details. As per OMAP USBOTG specification, need to configure the USBOTG to smart idle/standby or no idle/standby during data transfer and force idle/standby when not in use to support retention and off-mode. By setting HWMOD_SWSUP_SIDLE and HWMOD_SWSUP_MSTANDBY flags, framework will take care of configuring to no idle/standby when module is enabled and force idle/standby when suspended. Signed-off-by: Hema HK Cc: Tony Lindgren Cc: Kevin Hilman Cc: Cousson, Benoit Cc: Paul Walmsley Signed-off-by: Felipe Balbi --- arch/arm/mach-omap2/omap_hwmod_2430_data.c | 98 ++++++++++++++++++++++++++++++ 1 file changed, 98 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 8ecfbcde13b..76bbf8a4703 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -89,6 +89,16 @@ static struct omap_hwmod omap2430_uart3_hwmod; static struct omap_hwmod omap2430_i2c1_hwmod; static struct omap_hwmod omap2430_i2c2_hwmod; +static struct omap_hwmod omap2430_usbhsotg_hwmod; + +/* l3_core -> usbhsotg interface */ +static struct omap_hwmod_ocp_if omap2430_usbhsotg__l3 = { + .master = &omap2430_usbhsotg_hwmod, + .slave = &omap2430_l3_main_hwmod, + .clk = "core_l3_ck", + .user = OCP_USER_MPU, +}; + /* I2C IP block address space length (in bytes) */ #define OMAP2_I2C_AS_LEN 128 @@ -189,6 +199,35 @@ static struct omap_hwmod_ocp_if omap2_l4_core__uart3 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* +* usbhsotg interface data +*/ +static struct omap_hwmod_addr_space omap2430_usbhsotg_addrs[] = { + { + .pa_start = OMAP243X_HS_BASE, + .pa_end = OMAP243X_HS_BASE + SZ_4K - 1, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core ->usbhsotg interface */ +static struct omap_hwmod_ocp_if omap2430_l4_core__usbhsotg = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_usbhsotg_hwmod, + .clk = "usb_l4_ick", + .addr = omap2430_usbhsotg_addrs, + .addr_cnt = ARRAY_SIZE(omap2430_usbhsotg_addrs), + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_ocp_if *omap2430_usbhsotg_masters[] = { + &omap2430_usbhsotg__l3, +}; + +static struct omap_hwmod_ocp_if *omap2430_usbhsotg_slaves[] = { + &omap2430_l4_core__usbhsotg, +}; + /* Slave interfaces on the L4_CORE interconnect */ static struct omap_hwmod_ocp_if *omap2430_l4_core_slaves[] = { &omap2430_l3_main__l4_core, @@ -919,6 +958,62 @@ static struct omap_hwmod omap2430_dma_system_hwmod = { .flags = HWMOD_NO_IDLEST, }; +/* + * usbhsotg + */ +static struct omap_hwmod_class_sysconfig omap2430_usbhsotg_sysc = { + .rev_offs = 0x0400, + .sysc_offs = 0x0404, + .syss_offs = 0x0408, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE| + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class usbotg_class = { + .name = "usbotg", + .sysc = &omap2430_usbhsotg_sysc, +}; + +/* usb_otg_hs */ +static struct omap_hwmod_irq_info omap2430_usbhsotg_mpu_irqs[] = { + + { .name = "mc", .irq = 92 }, + { .name = "dma", .irq = 93 }, +}; + +static struct omap_hwmod omap2430_usbhsotg_hwmod = { + .name = "usb_otg_hs", + .mpu_irqs = omap2430_usbhsotg_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2430_usbhsotg_mpu_irqs), + .main_clk = "usbhs_ick", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP2430_EN_USBHS_MASK, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP2430_ST_USBHS_SHIFT, + }, + }, + .masters = omap2430_usbhsotg_masters, + .masters_cnt = ARRAY_SIZE(omap2430_usbhsotg_masters), + .slaves = omap2430_usbhsotg_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_usbhsotg_slaves), + .class = &usbotg_class, + /* + * Erratum ID: i479 idle_req / idle_ack mechanism potentially + * broken when autoidle is enabled + * workaround is to disable the autoidle bit at module level. + */ + .flags = HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE + | HWMOD_SWSUP_MSTANDBY, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) +}; + static __initdata struct omap_hwmod *omap2430_hwmods[] = { &omap2430_l3_main_hwmod, &omap2430_l4_core_hwmod, @@ -941,6 +1036,9 @@ static __initdata struct omap_hwmod *omap2430_hwmods[] = { /* dma_system class*/ &omap2430_dma_system_hwmod, + + /* usbotg class*/ + &omap2430_usbhsotg_hwmod, NULL, }; -- cgit v1.2.3-18-g5258 From 870ea2b8e750f40fe5681b902ce0d5445297e610 Mon Sep 17 00:00:00 2001 From: Hema HK Date: Thu, 17 Feb 2011 12:07:18 +0530 Subject: OMAP3xxx: hwmod data: Add USBOTG OMAP3 hwmod data structures are populated for USBOTG with base address, L3 and L4 interface clocks, IRQs and sysconfig register details. This is applicable for OMAP3430 amd OMAP3630. As per OMAP USBOTG specification, need to configure the USBOTG to smart idle/standby or no idle/standby during data transfer and force idle/standby when not in use to support retention and offmode. By setting HWMOD_SWSUP_SIDLE and HWMOD_SWSUP_MSTANDBY flags, framework will take care of configuring to no idle/standby when module is enabled and force idle/standby when idled. Signed-off-by: Hema HK Cc: Tony Lindgren Cc: Kevin Hilman Cc: Cousson, Benoit Cc: Paul Walmsley Signed-off-by: Felipe Balbi --- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 101 +++++++++++++++++++++++++++++ 1 file changed, 101 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 8d8181334f8..cce09fdb904 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -107,6 +107,15 @@ static struct omap_hwmod omap3xxx_uart1_hwmod; static struct omap_hwmod omap3xxx_uart2_hwmod; static struct omap_hwmod omap3xxx_uart3_hwmod; static struct omap_hwmod omap3xxx_uart4_hwmod; +static struct omap_hwmod omap3xxx_usbhsotg_hwmod; + +/* l3_core -> usbhsotg interface */ +static struct omap_hwmod_ocp_if omap3xxx_usbhsotg__l3 = { + .master = &omap3xxx_usbhsotg_hwmod, + .slave = &omap3xxx_l3_main_hwmod, + .clk = "core_l3_ick", + .user = OCP_USER_MPU, +}; /* L4_CORE -> L4_WKUP interface */ static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = { @@ -301,6 +310,36 @@ static struct omap_hwmod_ocp_if omap3_l4_core__sr2 = { .user = OCP_USER_MPU, }; +/* +* usbhsotg interface data +*/ + +static struct omap_hwmod_addr_space omap3xxx_usbhsotg_addrs[] = { + { + .pa_start = OMAP34XX_HSUSB_OTG_BASE, + .pa_end = OMAP34XX_HSUSB_OTG_BASE + SZ_4K - 1, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> usbhsotg */ +static struct omap_hwmod_ocp_if omap3xxx_l4_core__usbhsotg = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_usbhsotg_hwmod, + .clk = "l4_ick", + .addr = omap3xxx_usbhsotg_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_usbhsotg_addrs), + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_ocp_if *omap3xxx_usbhsotg_masters[] = { + &omap3xxx_usbhsotg__l3, +}; + +static struct omap_hwmod_ocp_if *omap3xxx_usbhsotg_slaves[] = { + &omap3xxx_l4_core__usbhsotg, +}; + /* Slave interfaces on the L4_CORE interconnect */ static struct omap_hwmod_ocp_if *omap3xxx_l4_core_slaves[] = { &omap3xxx_l3_main__l4_core, @@ -1356,6 +1395,64 @@ static struct omap_hwmod omap36xx_sr2_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3630ES1), }; +/* + * usbhsotg + */ +static struct omap_hwmod_class_sysconfig omap3xxx_usbhsotg_sysc = { + .rev_offs = 0x0400, + .sysc_offs = 0x0404, + .syss_offs = 0x0408, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE| + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class usbotg_class = { + .name = "usbotg", + .sysc = &omap3xxx_usbhsotg_sysc, +}; + +/* usb_otg_hs */ +static struct omap_hwmod_irq_info omap3xxx_usbhsotg_mpu_irqs[] = { + + { .name = "mc", .irq = 92 }, + { .name = "dma", .irq = 93 }, +}; + +static struct omap_hwmod omap3xxx_usbhsotg_hwmod = { + .name = "usb_otg_hs", + .mpu_irqs = omap3xxx_usbhsotg_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_usbhsotg_mpu_irqs), + .main_clk = "hsotgusb_ick", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_HSOTGUSB_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT, + .idlest_stdby_bit = OMAP3430ES2_ST_HSOTGUSB_STDBY_SHIFT + }, + }, + .masters = omap3xxx_usbhsotg_masters, + .masters_cnt = ARRAY_SIZE(omap3xxx_usbhsotg_masters), + .slaves = omap3xxx_usbhsotg_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_usbhsotg_slaves), + .class = &usbotg_class, + + /* + * Erratum ID: i479 idle_req / idle_ack mechanism potentially + * broken when autoidle is enabled + * workaround is to disable the autoidle bit at module level. + */ + .flags = HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE + | HWMOD_SWSUP_MSTANDBY, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) +}; + static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { &omap3xxx_l3_main_hwmod, &omap3xxx_l4_core_hwmod, @@ -1387,6 +1484,10 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { /* dma_system class*/ &omap3xxx_dma_system_hwmod, + + /* usbotg class */ + &omap3xxx_usbhsotg_hwmod, + NULL, }; -- cgit v1.2.3-18-g5258 From 273ff8c3bc04cf358c131f49ee7a11efa7ec73d7 Mon Sep 17 00:00:00 2001 From: Hema HK Date: Thu, 17 Feb 2011 12:07:19 +0530 Subject: AM35xx: hwmod data: Add USBOTG AM35xx hwmod data structures are populated for USBOTG with base address, L3 and L4 interface clocks and IRQ. Signed-off-by: Hema HK Cc: Tony Lindgren Cc: Kevin Hilman Cc: Cousson, Benoit Cc: Paul Walmsley Signed-off-by: Felipe Balbi --- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 65 ++++++++++++++++++++++++++++++ 1 file changed, 65 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index cce09fdb904..b4cd8ddf963 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -28,6 +28,7 @@ #include "prm-regbits-34xx.h" #include "cm-regbits-34xx.h" #include "wd_timer.h" +#include /* * OMAP3xxx hardware module integration data @@ -55,6 +56,8 @@ static struct omap_hwmod omap3xxx_gpio5_hwmod; static struct omap_hwmod omap3xxx_gpio6_hwmod; static struct omap_hwmod omap34xx_sr1_hwmod; static struct omap_hwmod omap34xx_sr2_hwmod; +static struct omap_hwmod am35xx_usbhsotg_hwmod; + static struct omap_hwmod omap3xxx_dma_system_hwmod; @@ -117,6 +120,13 @@ static struct omap_hwmod_ocp_if omap3xxx_usbhsotg__l3 = { .user = OCP_USER_MPU, }; +/* l3_core -> am35xx_usbhsotg interface */ +static struct omap_hwmod_ocp_if am35xx_usbhsotg__l3 = { + .master = &am35xx_usbhsotg_hwmod, + .slave = &omap3xxx_l3_main_hwmod, + .clk = "core_l3_ick", + .user = OCP_USER_MPU, +}; /* L4_CORE -> L4_WKUP interface */ static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = { .master = &omap3xxx_l4_core_hwmod, @@ -340,6 +350,31 @@ static struct omap_hwmod_ocp_if *omap3xxx_usbhsotg_slaves[] = { &omap3xxx_l4_core__usbhsotg, }; +static struct omap_hwmod_addr_space am35xx_usbhsotg_addrs[] = { + { + .pa_start = AM35XX_IPSS_USBOTGSS_BASE, + .pa_end = AM35XX_IPSS_USBOTGSS_BASE + SZ_4K - 1, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> usbhsotg */ +static struct omap_hwmod_ocp_if am35xx_l4_core__usbhsotg = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &am35xx_usbhsotg_hwmod, + .clk = "l4_ick", + .addr = am35xx_usbhsotg_addrs, + .addr_cnt = ARRAY_SIZE(am35xx_usbhsotg_addrs), + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_ocp_if *am35xx_usbhsotg_masters[] = { + &am35xx_usbhsotg__l3, +}; + +static struct omap_hwmod_ocp_if *am35xx_usbhsotg_slaves[] = { + &am35xx_l4_core__usbhsotg, +}; /* Slave interfaces on the L4_CORE interconnect */ static struct omap_hwmod_ocp_if *omap3xxx_l4_core_slaves[] = { &omap3xxx_l3_main__l4_core, @@ -1452,6 +1487,33 @@ static struct omap_hwmod omap3xxx_usbhsotg_hwmod = { | HWMOD_SWSUP_MSTANDBY, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) }; +/* usb_otg_hs */ +static struct omap_hwmod_irq_info am35xx_usbhsotg_mpu_irqs[] = { + + { .name = "mc", .irq = 71 }, +}; + +static struct omap_hwmod_class am35xx_usbotg_class = { + .name = "am35xx_usbotg", + .sysc = NULL, +}; + +static struct omap_hwmod am35xx_usbhsotg_hwmod = { + .name = "am35x_otg_hs", + .mpu_irqs = am35xx_usbhsotg_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(am35xx_usbhsotg_mpu_irqs), + .main_clk = NULL, + .prcm = { + .omap2 = { + }, + }, + .masters = am35xx_usbhsotg_masters, + .masters_cnt = ARRAY_SIZE(am35xx_usbhsotg_masters), + .slaves = am35xx_usbhsotg_slaves, + .slaves_cnt = ARRAY_SIZE(am35xx_usbhsotg_slaves), + .class = &am35xx_usbotg_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES3_1) +}; static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { &omap3xxx_l3_main_hwmod, @@ -1488,6 +1550,9 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { /* usbotg class */ &omap3xxx_usbhsotg_hwmod, + /* usbotg for am35x */ + &am35xx_usbhsotg_hwmod, + NULL, }; -- cgit v1.2.3-18-g5258 From 74ab0030b574a555a30d6520f84dd644628033a8 Mon Sep 17 00:00:00 2001 From: "Justin P. Mattock" Date: Fri, 28 Jan 2011 11:47:20 -0800 Subject: mbox-db5500.c Change initate to initiate. Signed-off-by: Justin P. Mattock Acked-by: Linus Walleij Signed-off-by: Jiri Kosina --- arch/arm/mach-ux500/mbox-db5500.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-ux500/mbox-db5500.c b/arch/arm/mach-ux500/mbox-db5500.c index cbf15718fc3..a4ffb9f4f46 100644 --- a/arch/arm/mach-ux500/mbox-db5500.c +++ b/arch/arm/mach-ux500/mbox-db5500.c @@ -498,7 +498,7 @@ struct mbox *mbox_setup(u8 mbox_id, mbox_recv_cb_t *mbox_cb, void *priv) #endif dev_info(&(mbox->pdev->dev), - "Mailbox driver with index %d initated!\n", mbox_id); + "Mailbox driver with index %d initiated!\n", mbox_id); exit: return mbox; -- cgit v1.2.3-18-g5258 From a335b2e17301afae9e794f21071a2fcdd5879c1e Mon Sep 17 00:00:00 2001 From: Ryota Ozaki Date: Thu, 10 Feb 2011 13:56:28 +0900 Subject: mm: Fix out-of-date comments which refers non-existent functions do_file_page and do_no_page don't exist anymore, but some comments still refers them. The patch fixes them by replacing them with existing ones. Signed-off-by: Ryota Ozaki Acked-by: KAMEZAWA Hiroyuki Reviewed-by: Minchan Kim Signed-off-by: Jiri Kosina --- arch/alpha/include/asm/cacheflush.h | 2 +- arch/avr32/mm/cache.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/alpha/include/asm/cacheflush.h b/arch/alpha/include/asm/cacheflush.h index 012f1243b1c..a9cb6aa447a 100644 --- a/arch/alpha/include/asm/cacheflush.h +++ b/arch/alpha/include/asm/cacheflush.h @@ -63,7 +63,7 @@ extern void flush_icache_user_range(struct vm_area_struct *vma, struct page *page, unsigned long addr, int len); #endif -/* This is used only in do_no_page and do_swap_page. */ +/* This is used only in __do_fault and do_swap_page. */ #define flush_icache_page(vma, page) \ flush_icache_user_range((vma), (page), 0, 0) diff --git a/arch/avr32/mm/cache.c b/arch/avr32/mm/cache.c index 24a74d1ca7d..6a46ecd56cf 100644 --- a/arch/avr32/mm/cache.c +++ b/arch/avr32/mm/cache.c @@ -113,7 +113,7 @@ void flush_icache_range(unsigned long start, unsigned long end) } /* - * This one is called from do_no_page(), do_swap_page() and install_page(). + * This one is called from __do_fault() and do_swap_page(). */ void flush_icache_page(struct vm_area_struct *vma, struct page *page) { -- cgit v1.2.3-18-g5258 From 18a26892d62d2786c2b259ba4605ee10bba0ba13 Mon Sep 17 00:00:00 2001 From: Hema HK Date: Thu, 17 Feb 2011 12:07:21 +0530 Subject: OMAP2+: musb: hwmod adaptation for musb registration Using omap_device_build API instead of platform_device_register for OMAP2430,OMAP3xxx, OMAP4430 and AM35x musb device registration. The device specific resources defined in centralized database will be used. Signed-off-by: Hema HK Cc: Tony Lindgren Cc: Kevin Hilman Cc: Cousson, Benoit Cc: Paul Walmsley Signed-off-by: Felipe Balbi --- arch/arm/mach-omap2/usb-musb.c | 84 ++++++++++++++++++++++-------------------- 1 file changed, 44 insertions(+), 40 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index 9788b494185..a9d4d143086 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -30,26 +30,11 @@ #include #include #include +#include #include "mux.h" #if defined(CONFIG_USB_MUSB_OMAP2PLUS) || defined (CONFIG_USB_MUSB_AM35X) -static struct resource musb_resources[] = { - [0] = { /* start and end set dynamically */ - .flags = IORESOURCE_MEM, - }, - [1] = { /* general IRQ */ - .start = INT_243X_HS_USB_MC, - .flags = IORESOURCE_IRQ, - .name = "mc", - }, - [2] = { /* DMA IRQ */ - .start = INT_243X_HS_USB_DMA, - .flags = IORESOURCE_IRQ, - .name = "dma", - }, -}; - static struct musb_hdrc_config musb_config = { .multipoint = 1, .dyn_fifo = 1, @@ -77,16 +62,12 @@ static struct musb_hdrc_platform_data musb_plat = { static u64 musb_dmamask = DMA_BIT_MASK(32); -static struct platform_device musb_device = { - .name = "musb-omap2430", - .id = -1, - .dev = { - .dma_mask = &musb_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &musb_plat, +static struct omap_device_pm_latency omap_musb_latency[] = { + { + .deactivate_func = omap_device_idle_hwmods, + .activate_func = omap_device_enable_hwmods, + .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, }, - .num_resources = ARRAY_SIZE(musb_resources), - .resource = musb_resources, }; static void usb_musb_mux_init(struct omap_musb_board_data *board_data) @@ -126,24 +107,20 @@ static void usb_musb_mux_init(struct omap_musb_board_data *board_data) break; } } + void __init usb_musb_init(struct omap_musb_board_data *board_data) { - if (cpu_is_omap243x()) { - musb_resources[0].start = OMAP243X_HS_BASE; - } else if (cpu_is_omap3517() || cpu_is_omap3505()) { - musb_device.name = "musb-am35x"; - musb_resources[0].start = AM35XX_IPSS_USBOTGSS_BASE; - musb_resources[1].start = INT_35XX_USBOTG_IRQ; - } else if (cpu_is_omap34xx()) { - musb_resources[0].start = OMAP34XX_HSUSB_OTG_BASE; - } else if (cpu_is_omap44xx()) { - musb_resources[0].start = OMAP44XX_HSUSB_OTG_BASE; - musb_resources[1].start = OMAP44XX_IRQ_HS_USB_MC_N; - musb_resources[2].start = OMAP44XX_IRQ_HS_USB_DMA_N; + struct omap_hwmod *oh; + struct omap_device *od; + struct platform_device *pdev; + struct device *dev; + int bus_id = -1; + const char *oh_name, *name; + if (cpu_is_omap3517() || cpu_is_omap3505()) { + } else if (cpu_is_omap44xx()) { usb_musb_mux_init(board_data); } - musb_resources[0].end = musb_resources[0].start + SZ_4K - 1; /* * REVISIT: This line can be removed once all the platforms using @@ -155,8 +132,35 @@ void __init usb_musb_init(struct omap_musb_board_data *board_data) musb_plat.mode = board_data->mode; musb_plat.extvbus = board_data->extvbus; - if (platform_device_register(&musb_device) < 0) - printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n"); + if (cpu_is_omap3517() || cpu_is_omap3505()) { + oh_name = "am35x_otg_hs"; + name = "musb-am35x"; + } else { + oh_name = "usb_otg_hs"; + name = "musb-omap2430"; + } + + oh = omap_hwmod_lookup(oh_name); + if (!oh) { + pr_err("Could not look up %s\n", oh_name); + return; + } + + od = omap_device_build(name, bus_id, oh, &musb_plat, + sizeof(musb_plat), omap_musb_latency, + ARRAY_SIZE(omap_musb_latency), false); + if (IS_ERR(od)) { + pr_err("Could not build omap_device for %s %s\n", + name, oh_name); + return; + } + + pdev = &od->pdev; + dev = &pdev->dev; + get_device(dev); + dev->dma_mask = &musb_dmamask; + dev->coherent_dma_mask = musb_dmamask; + put_device(dev); } #else -- cgit v1.2.3-18-g5258 From 9bcbd7f0d577b3f6d5742188563457a083b8ae7f Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Wed, 2 Feb 2011 17:52:13 +0530 Subject: OMAP4: hwmod data: Add McSPI Update omap4 hwmod file with McSPI info. Signed-off-by: Benoit Cousson Signed-off-by: Charulatha V Signed-off-by: Govindraj.R Acked-by: Grant Likely Reviewed-by: Kevin Hilman --- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 249 ++++++++++++++++++++++++++++- 1 file changed, 245 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 46da576ffaf..8199eb26fd3 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -534,10 +534,6 @@ static struct omap_hwmod omap44xx_mpu_private_hwmod = { * mcbsp3 * mcbsp4 * mcpdm - * mcspi1 - * mcspi2 - * mcspi3 - * mcspi4 * mmc1 * mmc2 * mmc3 @@ -1433,6 +1429,245 @@ static struct omap_hwmod omap44xx_iva_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; +/* + * 'mcspi' class + * multichannel serial port interface (mcspi) / master/slave synchronous serial + * bus + */ + +static struct omap_hwmod_class_sysconfig omap44xx_mcspi_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS | + SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class omap44xx_mcspi_hwmod_class = { + .name = "mcspi", + .sysc = &omap44xx_mcspi_sysc, +}; + +/* mcspi1 */ +static struct omap_hwmod omap44xx_mcspi1_hwmod; +static struct omap_hwmod_irq_info omap44xx_mcspi1_irqs[] = { + { .irq = 65 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_dma_info omap44xx_mcspi1_sdma_reqs[] = { + { .name = "tx0", .dma_req = 34 + OMAP44XX_DMA_REQ_START }, + { .name = "rx0", .dma_req = 35 + OMAP44XX_DMA_REQ_START }, + { .name = "tx1", .dma_req = 36 + OMAP44XX_DMA_REQ_START }, + { .name = "rx1", .dma_req = 37 + OMAP44XX_DMA_REQ_START }, + { .name = "tx2", .dma_req = 38 + OMAP44XX_DMA_REQ_START }, + { .name = "rx2", .dma_req = 39 + OMAP44XX_DMA_REQ_START }, + { .name = "tx3", .dma_req = 40 + OMAP44XX_DMA_REQ_START }, + { .name = "rx3", .dma_req = 41 + OMAP44XX_DMA_REQ_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_mcspi1_addrs[] = { + { + .pa_start = 0x48098000, + .pa_end = 0x480981ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> mcspi1 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi1 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_mcspi1_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_mcspi1_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_mcspi1_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mcspi1 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_mcspi1_slaves[] = { + &omap44xx_l4_per__mcspi1, +}; + +static struct omap_hwmod omap44xx_mcspi1_hwmod = { + .name = "mcspi1", + .class = &omap44xx_mcspi_hwmod_class, + .mpu_irqs = omap44xx_mcspi1_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_mcspi1_irqs), + .sdma_reqs = omap44xx_mcspi1_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_mcspi1_sdma_reqs), + .main_clk = "mcspi1_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_L4PER_MCSPI1_CLKCTRL, + }, + }, + .slaves = omap44xx_mcspi1_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_mcspi1_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* mcspi2 */ +static struct omap_hwmod omap44xx_mcspi2_hwmod; +static struct omap_hwmod_irq_info omap44xx_mcspi2_irqs[] = { + { .irq = 66 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_dma_info omap44xx_mcspi2_sdma_reqs[] = { + { .name = "tx0", .dma_req = 42 + OMAP44XX_DMA_REQ_START }, + { .name = "rx0", .dma_req = 43 + OMAP44XX_DMA_REQ_START }, + { .name = "tx1", .dma_req = 44 + OMAP44XX_DMA_REQ_START }, + { .name = "rx1", .dma_req = 45 + OMAP44XX_DMA_REQ_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_mcspi2_addrs[] = { + { + .pa_start = 0x4809a000, + .pa_end = 0x4809a1ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> mcspi2 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi2 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_mcspi2_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_mcspi2_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_mcspi2_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mcspi2 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_mcspi2_slaves[] = { + &omap44xx_l4_per__mcspi2, +}; + +static struct omap_hwmod omap44xx_mcspi2_hwmod = { + .name = "mcspi2", + .class = &omap44xx_mcspi_hwmod_class, + .mpu_irqs = omap44xx_mcspi2_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_mcspi2_irqs), + .sdma_reqs = omap44xx_mcspi2_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_mcspi2_sdma_reqs), + .main_clk = "mcspi2_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_L4PER_MCSPI2_CLKCTRL, + }, + }, + .slaves = omap44xx_mcspi2_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_mcspi2_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* mcspi3 */ +static struct omap_hwmod omap44xx_mcspi3_hwmod; +static struct omap_hwmod_irq_info omap44xx_mcspi3_irqs[] = { + { .irq = 91 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_dma_info omap44xx_mcspi3_sdma_reqs[] = { + { .name = "tx0", .dma_req = 14 + OMAP44XX_DMA_REQ_START }, + { .name = "rx0", .dma_req = 15 + OMAP44XX_DMA_REQ_START }, + { .name = "tx1", .dma_req = 22 + OMAP44XX_DMA_REQ_START }, + { .name = "rx1", .dma_req = 23 + OMAP44XX_DMA_REQ_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_mcspi3_addrs[] = { + { + .pa_start = 0x480b8000, + .pa_end = 0x480b81ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> mcspi3 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi3 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_mcspi3_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_mcspi3_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_mcspi3_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mcspi3 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_mcspi3_slaves[] = { + &omap44xx_l4_per__mcspi3, +}; + +static struct omap_hwmod omap44xx_mcspi3_hwmod = { + .name = "mcspi3", + .class = &omap44xx_mcspi_hwmod_class, + .mpu_irqs = omap44xx_mcspi3_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_mcspi3_irqs), + .sdma_reqs = omap44xx_mcspi3_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_mcspi3_sdma_reqs), + .main_clk = "mcspi3_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_L4PER_MCSPI3_CLKCTRL, + }, + }, + .slaves = omap44xx_mcspi3_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_mcspi3_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* mcspi4 */ +static struct omap_hwmod omap44xx_mcspi4_hwmod; +static struct omap_hwmod_irq_info omap44xx_mcspi4_irqs[] = { + { .irq = 48 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_dma_info omap44xx_mcspi4_sdma_reqs[] = { + { .name = "tx0", .dma_req = 69 + OMAP44XX_DMA_REQ_START }, + { .name = "rx0", .dma_req = 70 + OMAP44XX_DMA_REQ_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_mcspi4_addrs[] = { + { + .pa_start = 0x480ba000, + .pa_end = 0x480ba1ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> mcspi4 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi4 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_mcspi4_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_mcspi4_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_mcspi4_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mcspi4 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_mcspi4_slaves[] = { + &omap44xx_l4_per__mcspi4, +}; + +static struct omap_hwmod omap44xx_mcspi4_hwmod = { + .name = "mcspi4", + .class = &omap44xx_mcspi_hwmod_class, + .mpu_irqs = omap44xx_mcspi4_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_mcspi4_irqs), + .sdma_reqs = omap44xx_mcspi4_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_mcspi4_sdma_reqs), + .main_clk = "mcspi4_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_L4PER_MCSPI4_CLKCTRL, + }, + }, + .slaves = omap44xx_mcspi4_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_mcspi4_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + /* * 'mpu' class * mpu sub-system @@ -2110,6 +2345,12 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = { &omap44xx_iva_seq0_hwmod, &omap44xx_iva_seq1_hwmod, + /* mcspi class */ + &omap44xx_mcspi1_hwmod, + &omap44xx_mcspi2_hwmod, + &omap44xx_mcspi3_hwmod, + &omap44xx_mcspi4_hwmod, + /* mpu class */ &omap44xx_mpu_hwmod, -- cgit v1.2.3-18-g5258 From 35d1a66a9cc03167ff5266e5fcb0dea639123d84 Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Fri, 11 Feb 2011 11:17:14 +0000 Subject: OMAP4: hwmod data: Add timer Add the data for the 11 timers IPs. OMAP4 contains two differents IP variants for the timers: - 8 x regular timer (3, 4, 5, 6, 7, 8, 9 & 11) - 3 x 1ms timer (1, 2 & 10) The regular timers registers programming model was changed due to the adaptation to the new IP interface. Unfortunately the 1ms version still use the previous programming model. The driver will have to take care of theses differences. Please note that the capability and the partitioning is also different depending of the instance. - timer 1 is inside the wakeup domain - timers 5, 6, 7 & 8 are inside in the ABE (audio backend) - timers 2, 3, 4, 9, 10 & 11 are inside the PER power domain The timer was previously named gptimerX or dmtimerX, it is now simply named timerX. Signed-off-by: Benoit Cousson Signed-off-by: Tarun Kanti DebBarma [b-cousson@ti.com: Fix alignement in class attribute, re-order flags and update the changelog] --- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 633 ++++++++++++++++++++++++++++- 1 file changed, 622 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 8199eb26fd3..37b30246a06 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -551,17 +551,6 @@ static struct omap_hwmod omap44xx_mpu_private_hwmod = { * sl2if * slimbus1 * slimbus2 - * timer1 - * timer10 - * timer11 - * timer2 - * timer3 - * timer4 - * timer5 - * timer6 - * timer7 - * timer8 - * timer9 * usb_host_fs * usb_host_hs * usb_otg_hs @@ -1933,6 +1922,615 @@ static struct omap_hwmod omap44xx_spinlock_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; +/* + * 'timer' class + * general purpose timer module with accurate 1ms tick + * This class contains several variants: ['timer_1ms', 'timer'] + */ + +static struct omap_hwmod_class_sysconfig omap44xx_timer_1ms_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | + SYSC_HAS_EMUFREE | SYSC_HAS_ENAWAKEUP | + SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | + SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap44xx_timer_1ms_hwmod_class = { + .name = "timer", + .sysc = &omap44xx_timer_1ms_sysc, +}; + +static struct omap_hwmod_class_sysconfig omap44xx_timer_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS | + SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class omap44xx_timer_hwmod_class = { + .name = "timer", + .sysc = &omap44xx_timer_sysc, +}; + +/* timer1 */ +static struct omap_hwmod omap44xx_timer1_hwmod; +static struct omap_hwmod_irq_info omap44xx_timer1_irqs[] = { + { .irq = 37 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_timer1_addrs[] = { + { + .pa_start = 0x4a318000, + .pa_end = 0x4a31807f, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_wkup -> timer1 */ +static struct omap_hwmod_ocp_if omap44xx_l4_wkup__timer1 = { + .master = &omap44xx_l4_wkup_hwmod, + .slave = &omap44xx_timer1_hwmod, + .clk = "l4_wkup_clk_mux_ck", + .addr = omap44xx_timer1_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_timer1_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer1 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_timer1_slaves[] = { + &omap44xx_l4_wkup__timer1, +}; + +static struct omap_hwmod omap44xx_timer1_hwmod = { + .name = "timer1", + .class = &omap44xx_timer_1ms_hwmod_class, + .mpu_irqs = omap44xx_timer1_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_timer1_irqs), + .main_clk = "timer1_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_WKUP_TIMER1_CLKCTRL, + }, + }, + .slaves = omap44xx_timer1_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_timer1_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* timer2 */ +static struct omap_hwmod omap44xx_timer2_hwmod; +static struct omap_hwmod_irq_info omap44xx_timer2_irqs[] = { + { .irq = 38 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_timer2_addrs[] = { + { + .pa_start = 0x48032000, + .pa_end = 0x4803207f, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> timer2 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__timer2 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_timer2_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_timer2_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_timer2_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer2 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_timer2_slaves[] = { + &omap44xx_l4_per__timer2, +}; + +static struct omap_hwmod omap44xx_timer2_hwmod = { + .name = "timer2", + .class = &omap44xx_timer_1ms_hwmod_class, + .mpu_irqs = omap44xx_timer2_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_timer2_irqs), + .main_clk = "timer2_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL, + }, + }, + .slaves = omap44xx_timer2_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_timer2_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* timer3 */ +static struct omap_hwmod omap44xx_timer3_hwmod; +static struct omap_hwmod_irq_info omap44xx_timer3_irqs[] = { + { .irq = 39 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_timer3_addrs[] = { + { + .pa_start = 0x48034000, + .pa_end = 0x4803407f, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> timer3 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__timer3 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_timer3_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_timer3_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_timer3_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer3 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_timer3_slaves[] = { + &omap44xx_l4_per__timer3, +}; + +static struct omap_hwmod omap44xx_timer3_hwmod = { + .name = "timer3", + .class = &omap44xx_timer_hwmod_class, + .mpu_irqs = omap44xx_timer3_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_timer3_irqs), + .main_clk = "timer3_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL, + }, + }, + .slaves = omap44xx_timer3_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_timer3_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* timer4 */ +static struct omap_hwmod omap44xx_timer4_hwmod; +static struct omap_hwmod_irq_info omap44xx_timer4_irqs[] = { + { .irq = 40 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_timer4_addrs[] = { + { + .pa_start = 0x48036000, + .pa_end = 0x4803607f, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> timer4 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__timer4 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_timer4_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_timer4_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_timer4_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer4 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_timer4_slaves[] = { + &omap44xx_l4_per__timer4, +}; + +static struct omap_hwmod omap44xx_timer4_hwmod = { + .name = "timer4", + .class = &omap44xx_timer_hwmod_class, + .mpu_irqs = omap44xx_timer4_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_timer4_irqs), + .main_clk = "timer4_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL, + }, + }, + .slaves = omap44xx_timer4_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_timer4_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* timer5 */ +static struct omap_hwmod omap44xx_timer5_hwmod; +static struct omap_hwmod_irq_info omap44xx_timer5_irqs[] = { + { .irq = 41 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_timer5_addrs[] = { + { + .pa_start = 0x40138000, + .pa_end = 0x4013807f, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_abe -> timer5 */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer5 = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_timer5_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_timer5_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_timer5_addrs), + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space omap44xx_timer5_dma_addrs[] = { + { + .pa_start = 0x49038000, + .pa_end = 0x4903807f, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_abe -> timer5 (dma) */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer5_dma = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_timer5_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_timer5_dma_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_timer5_dma_addrs), + .user = OCP_USER_SDMA, +}; + +/* timer5 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_timer5_slaves[] = { + &omap44xx_l4_abe__timer5, + &omap44xx_l4_abe__timer5_dma, +}; + +static struct omap_hwmod omap44xx_timer5_hwmod = { + .name = "timer5", + .class = &omap44xx_timer_hwmod_class, + .mpu_irqs = omap44xx_timer5_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_timer5_irqs), + .main_clk = "timer5_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM1_ABE_TIMER5_CLKCTRL, + }, + }, + .slaves = omap44xx_timer5_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_timer5_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* timer6 */ +static struct omap_hwmod omap44xx_timer6_hwmod; +static struct omap_hwmod_irq_info omap44xx_timer6_irqs[] = { + { .irq = 42 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_timer6_addrs[] = { + { + .pa_start = 0x4013a000, + .pa_end = 0x4013a07f, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_abe -> timer6 */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer6 = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_timer6_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_timer6_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_timer6_addrs), + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space omap44xx_timer6_dma_addrs[] = { + { + .pa_start = 0x4903a000, + .pa_end = 0x4903a07f, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_abe -> timer6 (dma) */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer6_dma = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_timer6_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_timer6_dma_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_timer6_dma_addrs), + .user = OCP_USER_SDMA, +}; + +/* timer6 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_timer6_slaves[] = { + &omap44xx_l4_abe__timer6, + &omap44xx_l4_abe__timer6_dma, +}; + +static struct omap_hwmod omap44xx_timer6_hwmod = { + .name = "timer6", + .class = &omap44xx_timer_hwmod_class, + .mpu_irqs = omap44xx_timer6_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_timer6_irqs), + .main_clk = "timer6_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM1_ABE_TIMER6_CLKCTRL, + }, + }, + .slaves = omap44xx_timer6_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_timer6_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* timer7 */ +static struct omap_hwmod omap44xx_timer7_hwmod; +static struct omap_hwmod_irq_info omap44xx_timer7_irqs[] = { + { .irq = 43 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_timer7_addrs[] = { + { + .pa_start = 0x4013c000, + .pa_end = 0x4013c07f, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_abe -> timer7 */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer7 = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_timer7_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_timer7_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_timer7_addrs), + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space omap44xx_timer7_dma_addrs[] = { + { + .pa_start = 0x4903c000, + .pa_end = 0x4903c07f, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_abe -> timer7 (dma) */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer7_dma = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_timer7_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_timer7_dma_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_timer7_dma_addrs), + .user = OCP_USER_SDMA, +}; + +/* timer7 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_timer7_slaves[] = { + &omap44xx_l4_abe__timer7, + &omap44xx_l4_abe__timer7_dma, +}; + +static struct omap_hwmod omap44xx_timer7_hwmod = { + .name = "timer7", + .class = &omap44xx_timer_hwmod_class, + .mpu_irqs = omap44xx_timer7_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_timer7_irqs), + .main_clk = "timer7_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM1_ABE_TIMER7_CLKCTRL, + }, + }, + .slaves = omap44xx_timer7_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_timer7_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* timer8 */ +static struct omap_hwmod omap44xx_timer8_hwmod; +static struct omap_hwmod_irq_info omap44xx_timer8_irqs[] = { + { .irq = 44 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_timer8_addrs[] = { + { + .pa_start = 0x4013e000, + .pa_end = 0x4013e07f, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_abe -> timer8 */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer8 = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_timer8_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_timer8_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_timer8_addrs), + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space omap44xx_timer8_dma_addrs[] = { + { + .pa_start = 0x4903e000, + .pa_end = 0x4903e07f, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_abe -> timer8 (dma) */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer8_dma = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_timer8_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_timer8_dma_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_timer8_dma_addrs), + .user = OCP_USER_SDMA, +}; + +/* timer8 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_timer8_slaves[] = { + &omap44xx_l4_abe__timer8, + &omap44xx_l4_abe__timer8_dma, +}; + +static struct omap_hwmod omap44xx_timer8_hwmod = { + .name = "timer8", + .class = &omap44xx_timer_hwmod_class, + .mpu_irqs = omap44xx_timer8_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_timer8_irqs), + .main_clk = "timer8_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM1_ABE_TIMER8_CLKCTRL, + }, + }, + .slaves = omap44xx_timer8_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_timer8_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* timer9 */ +static struct omap_hwmod omap44xx_timer9_hwmod; +static struct omap_hwmod_irq_info omap44xx_timer9_irqs[] = { + { .irq = 45 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_timer9_addrs[] = { + { + .pa_start = 0x4803e000, + .pa_end = 0x4803e07f, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> timer9 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__timer9 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_timer9_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_timer9_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_timer9_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer9 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_timer9_slaves[] = { + &omap44xx_l4_per__timer9, +}; + +static struct omap_hwmod omap44xx_timer9_hwmod = { + .name = "timer9", + .class = &omap44xx_timer_hwmod_class, + .mpu_irqs = omap44xx_timer9_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_timer9_irqs), + .main_clk = "timer9_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL, + }, + }, + .slaves = omap44xx_timer9_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_timer9_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* timer10 */ +static struct omap_hwmod omap44xx_timer10_hwmod; +static struct omap_hwmod_irq_info omap44xx_timer10_irqs[] = { + { .irq = 46 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_timer10_addrs[] = { + { + .pa_start = 0x48086000, + .pa_end = 0x4808607f, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> timer10 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__timer10 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_timer10_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_timer10_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_timer10_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer10 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_timer10_slaves[] = { + &omap44xx_l4_per__timer10, +}; + +static struct omap_hwmod omap44xx_timer10_hwmod = { + .name = "timer10", + .class = &omap44xx_timer_1ms_hwmod_class, + .mpu_irqs = omap44xx_timer10_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_timer10_irqs), + .main_clk = "timer10_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL, + }, + }, + .slaves = omap44xx_timer10_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_timer10_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* timer11 */ +static struct omap_hwmod omap44xx_timer11_hwmod; +static struct omap_hwmod_irq_info omap44xx_timer11_irqs[] = { + { .irq = 47 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_timer11_addrs[] = { + { + .pa_start = 0x48088000, + .pa_end = 0x4808807f, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> timer11 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__timer11 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_timer11_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_timer11_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_timer11_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer11 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_timer11_slaves[] = { + &omap44xx_l4_per__timer11, +}; + +static struct omap_hwmod omap44xx_timer11_hwmod = { + .name = "timer11", + .class = &omap44xx_timer_hwmod_class, + .mpu_irqs = omap44xx_timer11_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_timer11_irqs), + .main_clk = "timer11_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL, + }, + }, + .slaves = omap44xx_timer11_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_timer11_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + /* * 'uart' class * universal asynchronous receiver/transmitter (uart) @@ -2362,6 +2960,19 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = { /* spinlock class */ &omap44xx_spinlock_hwmod, + /* timer class */ + &omap44xx_timer1_hwmod, + &omap44xx_timer2_hwmod, + &omap44xx_timer3_hwmod, + &omap44xx_timer4_hwmod, + &omap44xx_timer5_hwmod, + &omap44xx_timer6_hwmod, + &omap44xx_timer7_hwmod, + &omap44xx_timer8_hwmod, + &omap44xx_timer9_hwmod, + &omap44xx_timer10_hwmod, + &omap44xx_timer11_hwmod, + /* uart class */ &omap44xx_uart1_hwmod, &omap44xx_uart2_hwmod, -- cgit v1.2.3-18-g5258 From d63bd74fbb5fb2161d9cb90cd7a93a2c5db47c63 Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Thu, 27 Jan 2011 11:17:03 +0000 Subject: OMAP4: hwmod data: Add DSS, DISPC, DSI1&2, RFBI, HDMI and VENC Add dss, dispc, dsi1, dsi2, hdmi, rfbi and venc hwmods. In OMAP4 there are severals IPs that can be reached by differents interconnect paths depending of the access initiator (MPU vs. SDMA). In the case of the DSS, both L3 direct path and L4 CFG path can be used to access all the DSS IPs. The two ocp_ip already exists to support the two address spaces. +------------+-- L3_MAIN --+ MPU IP | | +-- L4_CFG --+ L3 main address range is specified first, since it is used by default. dss is also considered as an IP as dispc, rfbi, and named as dss_core. Signed-off-by: Benoit Cousson Signed-off-by: Mayuresh Janorkar Signed-off-by: Senthilvadivu Guruswamy Signed-off-by: Sumit Semwal [b-cousson@ti.com: Re-organize structures to match file convention and remove irq entry from dss_hwmod] --- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 612 ++++++++++++++++++++++++++++- 1 file changed, 604 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 37b30246a06..aafe60dc711 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -1,7 +1,7 @@ /* * Hardware modules present on the OMAP44xx chips * - * Copyright (C) 2009-2010 Texas Instruments, Inc. + * Copyright (C) 2009-2011 Texas Instruments, Inc. * Copyright (C) 2009-2010 Nokia Corporation * * Paul Walmsley @@ -43,6 +43,7 @@ static struct omap_hwmod omap44xx_dma_system_hwmod; static struct omap_hwmod omap44xx_dmm_hwmod; static struct omap_hwmod omap44xx_dsp_hwmod; +static struct omap_hwmod omap44xx_dss_hwmod; static struct omap_hwmod omap44xx_emif_fw_hwmod; static struct omap_hwmod omap44xx_iva_hwmod; static struct omap_hwmod omap44xx_l3_instr_hwmod; @@ -213,6 +214,14 @@ static struct omap_hwmod_ocp_if omap44xx_dsp__l3_main_1 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* dss -> l3_main_1 */ +static struct omap_hwmod_ocp_if omap44xx_dss__l3_main_1 = { + .master = &omap44xx_dss_hwmod, + .slave = &omap44xx_l3_main_1_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* l3_main_2 -> l3_main_1 */ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l3_main_1 = { .master = &omap44xx_l3_main_2_hwmod, @@ -240,6 +249,7 @@ static struct omap_hwmod_ocp_if omap44xx_mpu__l3_main_1 = { /* l3_main_1 slave ports */ static struct omap_hwmod_ocp_if *omap44xx_l3_main_1_slaves[] = { &omap44xx_dsp__l3_main_1, + &omap44xx_dss__l3_main_1, &omap44xx_l3_main_2__l3_main_1, &omap44xx_l4_cfg__l3_main_1, &omap44xx_mpu__l3_main_1, @@ -507,13 +517,6 @@ static struct omap_hwmod omap44xx_mpu_private_hwmod = { * ctrl_module_wkup * debugss * dmic - * dss - * dss_dispc - * dss_dsi1 - * dss_dsi2 - * dss_hdmi - * dss_rfbi - * dss_venc * efuse_ctrl_cust * efuse_ctrl_std * elm @@ -730,6 +733,590 @@ static struct omap_hwmod omap44xx_dsp_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; +/* + * 'dss' class + * display sub-system + */ + +static struct omap_hwmod_class_sysconfig omap44xx_dss_sysc = { + .rev_offs = 0x0000, + .syss_offs = 0x0014, + .sysc_flags = SYSS_HAS_RESET_STATUS, +}; + +static struct omap_hwmod_class omap44xx_dss_hwmod_class = { + .name = "dss", + .sysc = &omap44xx_dss_sysc, +}; + +/* dss */ +/* dss master ports */ +static struct omap_hwmod_ocp_if *omap44xx_dss_masters[] = { + &omap44xx_dss__l3_main_1, +}; + +static struct omap_hwmod_addr_space omap44xx_dss_dma_addrs[] = { + { + .pa_start = 0x58000000, + .pa_end = 0x5800007f, + .flags = ADDR_TYPE_RT + }, +}; + +/* l3_main_2 -> dss */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss = { + .master = &omap44xx_l3_main_2_hwmod, + .slave = &omap44xx_dss_hwmod, + .clk = "l3_div_ck", + .addr = omap44xx_dss_dma_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_dss_dma_addrs), + .user = OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_dss_addrs[] = { + { + .pa_start = 0x48040000, + .pa_end = 0x4804007f, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> dss */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__dss = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_dss_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_dss_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_dss_addrs), + .user = OCP_USER_MPU, +}; + +/* dss slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_dss_slaves[] = { + &omap44xx_l3_main_2__dss, + &omap44xx_l4_per__dss, +}; + +static struct omap_hwmod_opt_clk dss_opt_clks[] = { + { .role = "sys_clk", .clk = "dss_sys_clk" }, + { .role = "tv_clk", .clk = "dss_tv_clk" }, + { .role = "dss_clk", .clk = "dss_dss_clk" }, + { .role = "video_clk", .clk = "dss_48mhz_clk" }, +}; + +static struct omap_hwmod omap44xx_dss_hwmod = { + .name = "dss_core", + .class = &omap44xx_dss_hwmod_class, + .main_clk = "dss_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL, + }, + }, + .opt_clks = dss_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks), + .slaves = omap44xx_dss_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_dss_slaves), + .masters = omap44xx_dss_masters, + .masters_cnt = ARRAY_SIZE(omap44xx_dss_masters), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* + * 'dispc' class + * display controller + */ + +static struct omap_hwmod_class_sysconfig omap44xx_dispc_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_MIDLEMODE | + SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | + SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap44xx_dispc_hwmod_class = { + .name = "dispc", + .sysc = &omap44xx_dispc_sysc, +}; + +/* dss_dispc */ +static struct omap_hwmod omap44xx_dss_dispc_hwmod; +static struct omap_hwmod_irq_info omap44xx_dss_dispc_irqs[] = { + { .irq = 25 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_dma_info omap44xx_dss_dispc_sdma_reqs[] = { + { .dma_req = 5 + OMAP44XX_DMA_REQ_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_dss_dispc_dma_addrs[] = { + { + .pa_start = 0x58001000, + .pa_end = 0x58001fff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l3_main_2 -> dss_dispc */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dispc = { + .master = &omap44xx_l3_main_2_hwmod, + .slave = &omap44xx_dss_dispc_hwmod, + .clk = "l3_div_ck", + .addr = omap44xx_dss_dispc_dma_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_dss_dispc_dma_addrs), + .user = OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_dss_dispc_addrs[] = { + { + .pa_start = 0x48041000, + .pa_end = 0x48041fff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> dss_dispc */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dispc = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_dss_dispc_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_dss_dispc_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_dss_dispc_addrs), + .user = OCP_USER_MPU, +}; + +/* dss_dispc slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_dss_dispc_slaves[] = { + &omap44xx_l3_main_2__dss_dispc, + &omap44xx_l4_per__dss_dispc, +}; + +static struct omap_hwmod omap44xx_dss_dispc_hwmod = { + .name = "dss_dispc", + .class = &omap44xx_dispc_hwmod_class, + .mpu_irqs = omap44xx_dss_dispc_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_dss_dispc_irqs), + .sdma_reqs = omap44xx_dss_dispc_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_dss_dispc_sdma_reqs), + .main_clk = "dss_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL, + }, + }, + .slaves = omap44xx_dss_dispc_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_dss_dispc_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* + * 'dsi' class + * display serial interface controller + */ + +static struct omap_hwmod_class_sysconfig omap44xx_dsi_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap44xx_dsi_hwmod_class = { + .name = "dsi", + .sysc = &omap44xx_dsi_sysc, +}; + +/* dss_dsi1 */ +static struct omap_hwmod omap44xx_dss_dsi1_hwmod; +static struct omap_hwmod_irq_info omap44xx_dss_dsi1_irqs[] = { + { .irq = 53 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_dma_info omap44xx_dss_dsi1_sdma_reqs[] = { + { .dma_req = 74 + OMAP44XX_DMA_REQ_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_dss_dsi1_dma_addrs[] = { + { + .pa_start = 0x58004000, + .pa_end = 0x580041ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l3_main_2 -> dss_dsi1 */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dsi1 = { + .master = &omap44xx_l3_main_2_hwmod, + .slave = &omap44xx_dss_dsi1_hwmod, + .clk = "l3_div_ck", + .addr = omap44xx_dss_dsi1_dma_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_dss_dsi1_dma_addrs), + .user = OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_dss_dsi1_addrs[] = { + { + .pa_start = 0x48044000, + .pa_end = 0x480441ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> dss_dsi1 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dsi1 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_dss_dsi1_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_dss_dsi1_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_dss_dsi1_addrs), + .user = OCP_USER_MPU, +}; + +/* dss_dsi1 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_dss_dsi1_slaves[] = { + &omap44xx_l3_main_2__dss_dsi1, + &omap44xx_l4_per__dss_dsi1, +}; + +static struct omap_hwmod omap44xx_dss_dsi1_hwmod = { + .name = "dss_dsi1", + .class = &omap44xx_dsi_hwmod_class, + .mpu_irqs = omap44xx_dss_dsi1_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_dss_dsi1_irqs), + .sdma_reqs = omap44xx_dss_dsi1_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_dss_dsi1_sdma_reqs), + .main_clk = "dss_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL, + }, + }, + .slaves = omap44xx_dss_dsi1_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_dss_dsi1_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* dss_dsi2 */ +static struct omap_hwmod omap44xx_dss_dsi2_hwmod; +static struct omap_hwmod_irq_info omap44xx_dss_dsi2_irqs[] = { + { .irq = 84 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_dma_info omap44xx_dss_dsi2_sdma_reqs[] = { + { .dma_req = 83 + OMAP44XX_DMA_REQ_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_dss_dsi2_dma_addrs[] = { + { + .pa_start = 0x58005000, + .pa_end = 0x580051ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l3_main_2 -> dss_dsi2 */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dsi2 = { + .master = &omap44xx_l3_main_2_hwmod, + .slave = &omap44xx_dss_dsi2_hwmod, + .clk = "l3_div_ck", + .addr = omap44xx_dss_dsi2_dma_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_dss_dsi2_dma_addrs), + .user = OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_dss_dsi2_addrs[] = { + { + .pa_start = 0x48045000, + .pa_end = 0x480451ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> dss_dsi2 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dsi2 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_dss_dsi2_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_dss_dsi2_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_dss_dsi2_addrs), + .user = OCP_USER_MPU, +}; + +/* dss_dsi2 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_dss_dsi2_slaves[] = { + &omap44xx_l3_main_2__dss_dsi2, + &omap44xx_l4_per__dss_dsi2, +}; + +static struct omap_hwmod omap44xx_dss_dsi2_hwmod = { + .name = "dss_dsi2", + .class = &omap44xx_dsi_hwmod_class, + .mpu_irqs = omap44xx_dss_dsi2_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_dss_dsi2_irqs), + .sdma_reqs = omap44xx_dss_dsi2_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_dss_dsi2_sdma_reqs), + .main_clk = "dss_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL, + }, + }, + .slaves = omap44xx_dss_dsi2_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_dss_dsi2_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* + * 'hdmi' class + * hdmi controller + */ + +static struct omap_hwmod_class_sysconfig omap44xx_hdmi_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .sysc_flags = (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class omap44xx_hdmi_hwmod_class = { + .name = "hdmi", + .sysc = &omap44xx_hdmi_sysc, +}; + +/* dss_hdmi */ +static struct omap_hwmod omap44xx_dss_hdmi_hwmod; +static struct omap_hwmod_irq_info omap44xx_dss_hdmi_irqs[] = { + { .irq = 101 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_dma_info omap44xx_dss_hdmi_sdma_reqs[] = { + { .dma_req = 75 + OMAP44XX_DMA_REQ_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_dss_hdmi_dma_addrs[] = { + { + .pa_start = 0x58006000, + .pa_end = 0x58006fff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l3_main_2 -> dss_hdmi */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_hdmi = { + .master = &omap44xx_l3_main_2_hwmod, + .slave = &omap44xx_dss_hdmi_hwmod, + .clk = "l3_div_ck", + .addr = omap44xx_dss_hdmi_dma_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_dss_hdmi_dma_addrs), + .user = OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_dss_hdmi_addrs[] = { + { + .pa_start = 0x48046000, + .pa_end = 0x48046fff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> dss_hdmi */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_hdmi = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_dss_hdmi_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_dss_hdmi_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_dss_hdmi_addrs), + .user = OCP_USER_MPU, +}; + +/* dss_hdmi slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_dss_hdmi_slaves[] = { + &omap44xx_l3_main_2__dss_hdmi, + &omap44xx_l4_per__dss_hdmi, +}; + +static struct omap_hwmod omap44xx_dss_hdmi_hwmod = { + .name = "dss_hdmi", + .class = &omap44xx_hdmi_hwmod_class, + .mpu_irqs = omap44xx_dss_hdmi_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_dss_hdmi_irqs), + .sdma_reqs = omap44xx_dss_hdmi_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_dss_hdmi_sdma_reqs), + .main_clk = "dss_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL, + }, + }, + .slaves = omap44xx_dss_hdmi_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_dss_hdmi_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* + * 'rfbi' class + * remote frame buffer interface + */ + +static struct omap_hwmod_class_sysconfig omap44xx_rfbi_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap44xx_rfbi_hwmod_class = { + .name = "rfbi", + .sysc = &omap44xx_rfbi_sysc, +}; + +/* dss_rfbi */ +static struct omap_hwmod omap44xx_dss_rfbi_hwmod; +static struct omap_hwmod_dma_info omap44xx_dss_rfbi_sdma_reqs[] = { + { .dma_req = 13 + OMAP44XX_DMA_REQ_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_dss_rfbi_dma_addrs[] = { + { + .pa_start = 0x58002000, + .pa_end = 0x580020ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l3_main_2 -> dss_rfbi */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_rfbi = { + .master = &omap44xx_l3_main_2_hwmod, + .slave = &omap44xx_dss_rfbi_hwmod, + .clk = "l3_div_ck", + .addr = omap44xx_dss_rfbi_dma_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_dss_rfbi_dma_addrs), + .user = OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_dss_rfbi_addrs[] = { + { + .pa_start = 0x48042000, + .pa_end = 0x480420ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> dss_rfbi */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_rfbi = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_dss_rfbi_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_dss_rfbi_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_dss_rfbi_addrs), + .user = OCP_USER_MPU, +}; + +/* dss_rfbi slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_dss_rfbi_slaves[] = { + &omap44xx_l3_main_2__dss_rfbi, + &omap44xx_l4_per__dss_rfbi, +}; + +static struct omap_hwmod omap44xx_dss_rfbi_hwmod = { + .name = "dss_rfbi", + .class = &omap44xx_rfbi_hwmod_class, + .sdma_reqs = omap44xx_dss_rfbi_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_dss_rfbi_sdma_reqs), + .main_clk = "dss_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL, + }, + }, + .slaves = omap44xx_dss_rfbi_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_dss_rfbi_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* + * 'venc' class + * video encoder + */ + +static struct omap_hwmod_class omap44xx_venc_hwmod_class = { + .name = "venc", +}; + +/* dss_venc */ +static struct omap_hwmod omap44xx_dss_venc_hwmod; +static struct omap_hwmod_addr_space omap44xx_dss_venc_dma_addrs[] = { + { + .pa_start = 0x58003000, + .pa_end = 0x580030ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l3_main_2 -> dss_venc */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_venc = { + .master = &omap44xx_l3_main_2_hwmod, + .slave = &omap44xx_dss_venc_hwmod, + .clk = "l3_div_ck", + .addr = omap44xx_dss_venc_dma_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_dss_venc_dma_addrs), + .user = OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_dss_venc_addrs[] = { + { + .pa_start = 0x48043000, + .pa_end = 0x480430ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> dss_venc */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_venc = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_dss_venc_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_dss_venc_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_dss_venc_addrs), + .user = OCP_USER_MPU, +}; + +/* dss_venc slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_dss_venc_slaves[] = { + &omap44xx_l3_main_2__dss_venc, + &omap44xx_l4_per__dss_venc, +}; + +static struct omap_hwmod omap44xx_dss_venc_hwmod = { + .name = "dss_venc", + .class = &omap44xx_venc_hwmod_class, + .main_clk = "dss_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL, + }, + }, + .slaves = omap44xx_dss_venc_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_dss_venc_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + /* * 'gpio' class * general purpose io module @@ -2924,6 +3511,15 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = { &omap44xx_dsp_hwmod, &omap44xx_dsp_c0_hwmod, + /* dss class */ + &omap44xx_dss_hwmod, + &omap44xx_dss_dispc_hwmod, + &omap44xx_dss_dsi1_hwmod, + &omap44xx_dss_dsi2_hwmod, + &omap44xx_dss_hdmi_hwmod, + &omap44xx_dss_rfbi_hwmod, + &omap44xx_dss_venc_hwmod, + /* gpio class */ &omap44xx_gpio1_hwmod, &omap44xx_gpio2_hwmod, -- cgit v1.2.3-18-g5258 From ec5df927a8f3d3eca9514c9a9ad6db830ae20acc Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Wed, 2 Feb 2011 19:27:21 +0000 Subject: OMAP4: hwmod data: Add mailbox Mailbox hwmod data for omap4. Signed-off-by: Benoit Cousson Signed-off-by: Omar Ramirez Luna [b-cousson@ti.com: Re-order the structures and remove the irq line name] --- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 68 +++++++++++++++++++++++++++++- 1 file changed, 67 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index aafe60dc711..efdf26655b4 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -530,7 +530,6 @@ static struct omap_hwmod omap44xx_mpu_private_hwmod = { * ipu * iss * kbd - * mailbox * mcasp * mcbsp1 * mcbsp2 @@ -2005,6 +2004,70 @@ static struct omap_hwmod omap44xx_iva_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; +/* + * 'mailbox' class + * mailbox module allowing communication between the on-chip processors using a + * queued mailbox-interrupt mechanism. + */ + +static struct omap_hwmod_class_sysconfig omap44xx_mailbox_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .sysc_flags = (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class omap44xx_mailbox_hwmod_class = { + .name = "mailbox", + .sysc = &omap44xx_mailbox_sysc, +}; + +/* mailbox */ +static struct omap_hwmod omap44xx_mailbox_hwmod; +static struct omap_hwmod_irq_info omap44xx_mailbox_irqs[] = { + { .irq = 26 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_mailbox_addrs[] = { + { + .pa_start = 0x4a0f4000, + .pa_end = 0x4a0f41ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_cfg -> mailbox */ +static struct omap_hwmod_ocp_if omap44xx_l4_cfg__mailbox = { + .master = &omap44xx_l4_cfg_hwmod, + .slave = &omap44xx_mailbox_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_mailbox_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_mailbox_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mailbox slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_mailbox_slaves[] = { + &omap44xx_l4_cfg__mailbox, +}; + +static struct omap_hwmod omap44xx_mailbox_hwmod = { + .name = "mailbox", + .class = &omap44xx_mailbox_hwmod_class, + .mpu_irqs = omap44xx_mailbox_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_mailbox_irqs), + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_L4CFG_MAILBOX_CLKCTRL, + }, + }, + .slaves = omap44xx_mailbox_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_mailbox_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + /* * 'mcspi' class * multichannel serial port interface (mcspi) / master/slave synchronous serial @@ -3539,6 +3602,9 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = { &omap44xx_iva_seq0_hwmod, &omap44xx_iva_seq1_hwmod, + /* mailbox class */ + &omap44xx_mailbox_hwmod, + /* mcspi class */ &omap44xx_mcspi1_hwmod, &omap44xx_mcspi2_hwmod, -- cgit v1.2.3-18-g5258 From 8ca476da04e452a01d984dd5b5333b3a562207a7 Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Tue, 25 Jan 2011 22:01:00 +0000 Subject: OMAP4: hwmod data: Add DMIC Add HWMOD entries for the OMAP DMIC. The HWMOD entires define the system resource requirements for the driver such as DMA addresses, channels, and IRQ's. Placing this information in the HWMOD database allows for more generic drivers to be written and having the specific implementation details defined in HWMOD. Signed-off-by: Benoit Cousson Signed-off-by: David Lambert [b-cousson@ti.com: Change the wrong hwmod name, add missing flag and re-order structures] --- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 94 +++++++++++++++++++++++++++++- 1 file changed, 93 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index efdf26655b4..1488438e4b0 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -516,7 +516,6 @@ static struct omap_hwmod omap44xx_mpu_private_hwmod = { * ctrl_module_pad_wkup * ctrl_module_wkup * debugss - * dmic * efuse_ctrl_cust * efuse_ctrl_std * elm @@ -647,6 +646,96 @@ static struct omap_hwmod omap44xx_dma_system_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; +/* + * 'dmic' class + * digital microphone controller + */ + +static struct omap_hwmod_class_sysconfig omap44xx_dmic_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS | + SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class omap44xx_dmic_hwmod_class = { + .name = "dmic", + .sysc = &omap44xx_dmic_sysc, +}; + +/* dmic */ +static struct omap_hwmod omap44xx_dmic_hwmod; +static struct omap_hwmod_irq_info omap44xx_dmic_irqs[] = { + { .irq = 114 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_dma_info omap44xx_dmic_sdma_reqs[] = { + { .dma_req = 66 + OMAP44XX_DMA_REQ_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_dmic_addrs[] = { + { + .pa_start = 0x4012e000, + .pa_end = 0x4012e07f, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_abe -> dmic */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_dmic_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_dmic_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_dmic_addrs), + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space omap44xx_dmic_dma_addrs[] = { + { + .pa_start = 0x4902e000, + .pa_end = 0x4902e07f, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_abe -> dmic (dma) */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic_dma = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_dmic_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_dmic_dma_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_dmic_dma_addrs), + .user = OCP_USER_SDMA, +}; + +/* dmic slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_dmic_slaves[] = { + &omap44xx_l4_abe__dmic, + &omap44xx_l4_abe__dmic_dma, +}; + +static struct omap_hwmod omap44xx_dmic_hwmod = { + .name = "dmic", + .class = &omap44xx_dmic_hwmod_class, + .mpu_irqs = omap44xx_dmic_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_dmic_irqs), + .sdma_reqs = omap44xx_dmic_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_dmic_sdma_reqs), + .main_clk = "dmic_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM1_ABE_DMIC_CLKCTRL, + }, + }, + .slaves = omap44xx_dmic_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_dmic_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + /* * 'dsp' class * dsp sub-system @@ -3570,6 +3659,9 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = { /* dma class */ &omap44xx_dma_system_hwmod, + /* dmic class */ + &omap44xx_dmic_hwmod, + /* dsp class */ &omap44xx_dsp_hwmod, &omap44xx_dsp_c0_hwmod, -- cgit v1.2.3-18-g5258 From 4ddff4932b31b8f21d1c57155ca5d4088693ce4b Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Mon, 31 Jan 2011 14:50:30 +0000 Subject: OMAP4: hwmod data: Add McBSP Add mcbsp data including a revision member in hwmod_class in order to provide mcbsp revision information in different omap. Signed-off-by: Benoit Cousson Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Charulatha V [b-cousson@ti.com: Remove the mcbsp4 memory name, re-order properly the structures] --- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 293 ++++++++++++++++++++++++++++- 1 file changed, 289 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 1488438e4b0..f108614f02f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -530,10 +530,6 @@ static struct omap_hwmod omap44xx_mpu_private_hwmod = { * iss * kbd * mcasp - * mcbsp1 - * mcbsp2 - * mcbsp3 - * mcbsp4 * mcpdm * mmc1 * mmc2 @@ -2157,6 +2153,289 @@ static struct omap_hwmod omap44xx_mailbox_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; +/* + * 'mcbsp' class + * multi channel buffered serial port controller + */ + +static struct omap_hwmod_class_sysconfig omap44xx_mcbsp_sysc = { + .sysc_offs = 0x008c, + .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_ENAWAKEUP | + SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap44xx_mcbsp_hwmod_class = { + .name = "mcbsp", + .sysc = &omap44xx_mcbsp_sysc, +}; + +/* mcbsp1 */ +static struct omap_hwmod omap44xx_mcbsp1_hwmod; +static struct omap_hwmod_irq_info omap44xx_mcbsp1_irqs[] = { + { .irq = 17 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_dma_info omap44xx_mcbsp1_sdma_reqs[] = { + { .name = "tx", .dma_req = 32 + OMAP44XX_DMA_REQ_START }, + { .name = "rx", .dma_req = 33 + OMAP44XX_DMA_REQ_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_mcbsp1_addrs[] = { + { + .pa_start = 0x40122000, + .pa_end = 0x401220ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_abe -> mcbsp1 */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp1 = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_mcbsp1_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_mcbsp1_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_mcbsp1_addrs), + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space omap44xx_mcbsp1_dma_addrs[] = { + { + .pa_start = 0x49022000, + .pa_end = 0x490220ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_abe -> mcbsp1 (dma) */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp1_dma = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_mcbsp1_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_mcbsp1_dma_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_mcbsp1_dma_addrs), + .user = OCP_USER_SDMA, +}; + +/* mcbsp1 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_mcbsp1_slaves[] = { + &omap44xx_l4_abe__mcbsp1, + &omap44xx_l4_abe__mcbsp1_dma, +}; + +static struct omap_hwmod omap44xx_mcbsp1_hwmod = { + .name = "mcbsp1", + .class = &omap44xx_mcbsp_hwmod_class, + .mpu_irqs = omap44xx_mcbsp1_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_mcbsp1_irqs), + .sdma_reqs = omap44xx_mcbsp1_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_mcbsp1_sdma_reqs), + .main_clk = "mcbsp1_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM1_ABE_MCBSP1_CLKCTRL, + }, + }, + .slaves = omap44xx_mcbsp1_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp1_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* mcbsp2 */ +static struct omap_hwmod omap44xx_mcbsp2_hwmod; +static struct omap_hwmod_irq_info omap44xx_mcbsp2_irqs[] = { + { .irq = 22 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_dma_info omap44xx_mcbsp2_sdma_reqs[] = { + { .name = "tx", .dma_req = 16 + OMAP44XX_DMA_REQ_START }, + { .name = "rx", .dma_req = 17 + OMAP44XX_DMA_REQ_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_mcbsp2_addrs[] = { + { + .pa_start = 0x40124000, + .pa_end = 0x401240ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_abe -> mcbsp2 */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp2 = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_mcbsp2_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_mcbsp2_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_mcbsp2_addrs), + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space omap44xx_mcbsp2_dma_addrs[] = { + { + .pa_start = 0x49024000, + .pa_end = 0x490240ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_abe -> mcbsp2 (dma) */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp2_dma = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_mcbsp2_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_mcbsp2_dma_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_mcbsp2_dma_addrs), + .user = OCP_USER_SDMA, +}; + +/* mcbsp2 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_mcbsp2_slaves[] = { + &omap44xx_l4_abe__mcbsp2, + &omap44xx_l4_abe__mcbsp2_dma, +}; + +static struct omap_hwmod omap44xx_mcbsp2_hwmod = { + .name = "mcbsp2", + .class = &omap44xx_mcbsp_hwmod_class, + .mpu_irqs = omap44xx_mcbsp2_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_mcbsp2_irqs), + .sdma_reqs = omap44xx_mcbsp2_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_mcbsp2_sdma_reqs), + .main_clk = "mcbsp2_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM1_ABE_MCBSP2_CLKCTRL, + }, + }, + .slaves = omap44xx_mcbsp2_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp2_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* mcbsp3 */ +static struct omap_hwmod omap44xx_mcbsp3_hwmod; +static struct omap_hwmod_irq_info omap44xx_mcbsp3_irqs[] = { + { .irq = 23 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_dma_info omap44xx_mcbsp3_sdma_reqs[] = { + { .name = "tx", .dma_req = 18 + OMAP44XX_DMA_REQ_START }, + { .name = "rx", .dma_req = 19 + OMAP44XX_DMA_REQ_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_mcbsp3_addrs[] = { + { + .pa_start = 0x40126000, + .pa_end = 0x401260ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_abe -> mcbsp3 */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp3 = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_mcbsp3_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_mcbsp3_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_mcbsp3_addrs), + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space omap44xx_mcbsp3_dma_addrs[] = { + { + .pa_start = 0x49026000, + .pa_end = 0x490260ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_abe -> mcbsp3 (dma) */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp3_dma = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_mcbsp3_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_mcbsp3_dma_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_mcbsp3_dma_addrs), + .user = OCP_USER_SDMA, +}; + +/* mcbsp3 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_mcbsp3_slaves[] = { + &omap44xx_l4_abe__mcbsp3, + &omap44xx_l4_abe__mcbsp3_dma, +}; + +static struct omap_hwmod omap44xx_mcbsp3_hwmod = { + .name = "mcbsp3", + .class = &omap44xx_mcbsp_hwmod_class, + .mpu_irqs = omap44xx_mcbsp3_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_mcbsp3_irqs), + .sdma_reqs = omap44xx_mcbsp3_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_mcbsp3_sdma_reqs), + .main_clk = "mcbsp3_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM1_ABE_MCBSP3_CLKCTRL, + }, + }, + .slaves = omap44xx_mcbsp3_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp3_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* mcbsp4 */ +static struct omap_hwmod omap44xx_mcbsp4_hwmod; +static struct omap_hwmod_irq_info omap44xx_mcbsp4_irqs[] = { + { .irq = 16 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_dma_info omap44xx_mcbsp4_sdma_reqs[] = { + { .name = "tx", .dma_req = 30 + OMAP44XX_DMA_REQ_START }, + { .name = "rx", .dma_req = 31 + OMAP44XX_DMA_REQ_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_mcbsp4_addrs[] = { + { + .pa_start = 0x48096000, + .pa_end = 0x480960ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> mcbsp4 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__mcbsp4 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_mcbsp4_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_mcbsp4_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_mcbsp4_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mcbsp4 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_mcbsp4_slaves[] = { + &omap44xx_l4_per__mcbsp4, +}; + +static struct omap_hwmod omap44xx_mcbsp4_hwmod = { + .name = "mcbsp4", + .class = &omap44xx_mcbsp_hwmod_class, + .mpu_irqs = omap44xx_mcbsp4_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_mcbsp4_irqs), + .sdma_reqs = omap44xx_mcbsp4_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_mcbsp4_sdma_reqs), + .main_clk = "mcbsp4_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_L4PER_MCBSP4_CLKCTRL, + }, + }, + .slaves = omap44xx_mcbsp4_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp4_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + /* * 'mcspi' class * multichannel serial port interface (mcspi) / master/slave synchronous serial @@ -3697,6 +3976,12 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = { /* mailbox class */ &omap44xx_mailbox_hwmod, + /* mcbsp class */ + &omap44xx_mcbsp1_hwmod, + &omap44xx_mcbsp2_hwmod, + &omap44xx_mcbsp3_hwmod, + &omap44xx_mcbsp4_hwmod, + /* mcspi class */ &omap44xx_mcspi1_hwmod, &omap44xx_mcspi2_hwmod, -- cgit v1.2.3-18-g5258 From 407a6888f7362cb3dabe69ea6d9dcf3c750dc56a Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Tue, 15 Feb 2011 22:39:48 +0100 Subject: OMAP4: hwmod data: Add AESS, McPDM, bandgap, counter_32k, MMC, KBD, ISS & IPU Add more hwmod structures but keep them commented out for the moment until the driver adaptation to hwmod / omap_device is done. Signed-off-by: Benoit Cousson Cc: Paul Walmsley Cc: Kevin Hilman --- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 1009 +++++++++++++++++++++++++++- 1 file changed, 993 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index f108614f02f..989bc967043 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -40,11 +40,15 @@ #define OMAP44XX_DMA_REQ_START 1 /* Backward references (IPs with Bus Master capability) */ +static struct omap_hwmod omap44xx_aess_hwmod; static struct omap_hwmod omap44xx_dma_system_hwmod; static struct omap_hwmod omap44xx_dmm_hwmod; static struct omap_hwmod omap44xx_dsp_hwmod; static struct omap_hwmod omap44xx_dss_hwmod; static struct omap_hwmod omap44xx_emif_fw_hwmod; +static struct omap_hwmod omap44xx_hsi_hwmod; +static struct omap_hwmod omap44xx_ipu_hwmod; +static struct omap_hwmod omap44xx_iss_hwmod; static struct omap_hwmod omap44xx_iva_hwmod; static struct omap_hwmod omap44xx_l3_instr_hwmod; static struct omap_hwmod omap44xx_l3_main_1_hwmod; @@ -54,6 +58,8 @@ static struct omap_hwmod omap44xx_l4_abe_hwmod; static struct omap_hwmod omap44xx_l4_cfg_hwmod; static struct omap_hwmod omap44xx_l4_per_hwmod; static struct omap_hwmod omap44xx_l4_wkup_hwmod; +static struct omap_hwmod omap44xx_mmc1_hwmod; +static struct omap_hwmod omap44xx_mmc2_hwmod; static struct omap_hwmod omap44xx_mpu_hwmod; static struct omap_hwmod omap44xx_mpu_private_hwmod; @@ -238,6 +244,22 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_1 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* mmc1 -> l3_main_1 */ +static struct omap_hwmod_ocp_if omap44xx_mmc1__l3_main_1 = { + .master = &omap44xx_mmc1_hwmod, + .slave = &omap44xx_l3_main_1_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mmc2 -> l3_main_1 */ +static struct omap_hwmod_ocp_if omap44xx_mmc2__l3_main_1 = { + .master = &omap44xx_mmc2_hwmod, + .slave = &omap44xx_l3_main_1_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* mpu -> l3_main_1 */ static struct omap_hwmod_ocp_if omap44xx_mpu__l3_main_1 = { .master = &omap44xx_mpu_hwmod, @@ -252,6 +274,8 @@ static struct omap_hwmod_ocp_if *omap44xx_l3_main_1_slaves[] = { &omap44xx_dss__l3_main_1, &omap44xx_l3_main_2__l3_main_1, &omap44xx_l4_cfg__l3_main_1, + &omap44xx_mmc1__l3_main_1, + &omap44xx_mmc2__l3_main_1, &omap44xx_mpu__l3_main_1, }; @@ -272,6 +296,30 @@ static struct omap_hwmod_ocp_if omap44xx_dma_system__l3_main_2 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* hsi -> l3_main_2 */ +static struct omap_hwmod_ocp_if omap44xx_hsi__l3_main_2 = { + .master = &omap44xx_hsi_hwmod, + .slave = &omap44xx_l3_main_2_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* ipu -> l3_main_2 */ +static struct omap_hwmod_ocp_if omap44xx_ipu__l3_main_2 = { + .master = &omap44xx_ipu_hwmod, + .slave = &omap44xx_l3_main_2_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* iss -> l3_main_2 */ +static struct omap_hwmod_ocp_if omap44xx_iss__l3_main_2 = { + .master = &omap44xx_iss_hwmod, + .slave = &omap44xx_l3_main_2_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* iva -> l3_main_2 */ static struct omap_hwmod_ocp_if omap44xx_iva__l3_main_2 = { .master = &omap44xx_iva_hwmod, @@ -299,6 +347,9 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_2 = { /* l3_main_2 slave ports */ static struct omap_hwmod_ocp_if *omap44xx_l3_main_2_slaves[] = { &omap44xx_dma_system__l3_main_2, + &omap44xx_hsi__l3_main_2, + &omap44xx_ipu__l3_main_2, + &omap44xx_iss__l3_main_2, &omap44xx_iva__l3_main_2, &omap44xx_l3_main_1__l3_main_2, &omap44xx_l4_cfg__l3_main_2, @@ -361,6 +412,14 @@ static struct omap_hwmod_class omap44xx_l4_hwmod_class = { }; /* l4_abe interface data */ +/* aess -> l4_abe */ +static struct omap_hwmod_ocp_if omap44xx_aess__l4_abe = { + .master = &omap44xx_aess_hwmod, + .slave = &omap44xx_l4_abe_hwmod, + .clk = "ocp_abe_iclk", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* dsp -> l4_abe */ static struct omap_hwmod_ocp_if omap44xx_dsp__l4_abe = { .master = &omap44xx_dsp_hwmod, @@ -387,6 +446,7 @@ static struct omap_hwmod_ocp_if omap44xx_mpu__l4_abe = { /* l4_abe slave ports */ static struct omap_hwmod_ocp_if *omap44xx_l4_abe_slaves[] = { + &omap44xx_aess__l4_abe, &omap44xx_dsp__l4_abe, &omap44xx_l3_main_1__l4_abe, &omap44xx_mpu__l4_abe, @@ -504,13 +564,10 @@ static struct omap_hwmod omap44xx_mpu_private_hwmod = { * - They still need to be validated with the driver * properly adapted to omap_hwmod / omap_device * - * aess - * bandgap * c2c * c2c_target_fw * cm_core * cm_core_aon - * counter_32k * ctrl_module_core * ctrl_module_pad_core * ctrl_module_pad_wkup @@ -526,22 +583,9 @@ static struct omap_hwmod omap44xx_mpu_private_hwmod = { * gpu * hdq1w * hsi - * ipu - * iss - * kbd - * mcasp - * mcpdm - * mmc1 - * mmc2 - * mmc3 - * mmc4 - * mmc5 - * mpu_c0 - * mpu_c1 * ocmc_ram * ocp2scp_usb_phy * ocp_wp_noc - * prcm * prcm_mpu * prm * scrm @@ -556,6 +600,194 @@ static struct omap_hwmod omap44xx_mpu_private_hwmod = { * usim */ +/* + * 'aess' class + * audio engine sub system + */ + +static struct omap_hwmod_class_sysconfig omap44xx_aess_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class omap44xx_aess_hwmod_class = { + .name = "aess", + .sysc = &omap44xx_aess_sysc, +}; + +/* aess */ +static struct omap_hwmod_irq_info omap44xx_aess_irqs[] = { + { .irq = 99 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_dma_info omap44xx_aess_sdma_reqs[] = { + { .name = "fifo0", .dma_req = 100 + OMAP44XX_DMA_REQ_START }, + { .name = "fifo1", .dma_req = 101 + OMAP44XX_DMA_REQ_START }, + { .name = "fifo2", .dma_req = 102 + OMAP44XX_DMA_REQ_START }, + { .name = "fifo3", .dma_req = 103 + OMAP44XX_DMA_REQ_START }, + { .name = "fifo4", .dma_req = 104 + OMAP44XX_DMA_REQ_START }, + { .name = "fifo5", .dma_req = 105 + OMAP44XX_DMA_REQ_START }, + { .name = "fifo6", .dma_req = 106 + OMAP44XX_DMA_REQ_START }, + { .name = "fifo7", .dma_req = 107 + OMAP44XX_DMA_REQ_START }, +}; + +/* aess master ports */ +static struct omap_hwmod_ocp_if *omap44xx_aess_masters[] = { + &omap44xx_aess__l4_abe, +}; + +static struct omap_hwmod_addr_space omap44xx_aess_addrs[] = { + { + .pa_start = 0x401f1000, + .pa_end = 0x401f13ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_abe -> aess */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_aess_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_aess_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_aess_addrs), + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space omap44xx_aess_dma_addrs[] = { + { + .pa_start = 0x490f1000, + .pa_end = 0x490f13ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_abe -> aess (dma) */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess_dma = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_aess_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_aess_dma_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_aess_dma_addrs), + .user = OCP_USER_SDMA, +}; + +/* aess slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_aess_slaves[] = { + &omap44xx_l4_abe__aess, + &omap44xx_l4_abe__aess_dma, +}; + +static struct omap_hwmod omap44xx_aess_hwmod = { + .name = "aess", + .class = &omap44xx_aess_hwmod_class, + .mpu_irqs = omap44xx_aess_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_aess_irqs), + .sdma_reqs = omap44xx_aess_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_aess_sdma_reqs), + .main_clk = "aess_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM1_ABE_AESS_CLKCTRL, + }, + }, + .slaves = omap44xx_aess_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_aess_slaves), + .masters = omap44xx_aess_masters, + .masters_cnt = ARRAY_SIZE(omap44xx_aess_masters), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* + * 'bandgap' class + * bangap reference for ldo regulators + */ + +static struct omap_hwmod_class omap44xx_bandgap_hwmod_class = { + .name = "bandgap", +}; + +/* bandgap */ +static struct omap_hwmod_opt_clk bandgap_opt_clks[] = { + { .role = "fclk", .clk = "bandgap_fclk" }, +}; + +static struct omap_hwmod omap44xx_bandgap_hwmod = { + .name = "bandgap", + .class = &omap44xx_bandgap_hwmod_class, + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_WKUP_BANDGAP_CLKCTRL, + }, + }, + .opt_clks = bandgap_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(bandgap_opt_clks), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* + * 'counter' class + * 32-bit ordinary counter, clocked by the falling edge of the 32 khz clock + */ + +static struct omap_hwmod_class_sysconfig omap44xx_counter_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0004, + .sysc_flags = SYSC_HAS_SIDLEMODE, + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap44xx_counter_hwmod_class = { + .name = "counter", + .sysc = &omap44xx_counter_sysc, +}; + +/* counter_32k */ +static struct omap_hwmod omap44xx_counter_32k_hwmod; +static struct omap_hwmod_addr_space omap44xx_counter_32k_addrs[] = { + { + .pa_start = 0x4a304000, + .pa_end = 0x4a30401f, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_wkup -> counter_32k */ +static struct omap_hwmod_ocp_if omap44xx_l4_wkup__counter_32k = { + .master = &omap44xx_l4_wkup_hwmod, + .slave = &omap44xx_counter_32k_hwmod, + .clk = "l4_wkup_clk_mux_ck", + .addr = omap44xx_counter_32k_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_counter_32k_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* counter_32k slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_counter_32k_slaves[] = { + &omap44xx_l4_wkup__counter_32k, +}; + +static struct omap_hwmod omap44xx_counter_32k_hwmod = { + .name = "counter_32k", + .class = &omap44xx_counter_hwmod_class, + .flags = HWMOD_SWSUP_SIDLE, + .main_clk = "sys_32k_ck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_WKUP_SYNCTIMER_CLKCTRL, + }, + }, + .slaves = omap44xx_counter_32k_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_counter_32k_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + /* * 'dma' class * dma controller for data exchange between memory to memory (i.e. internal or @@ -1747,6 +1979,83 @@ static struct omap_hwmod omap44xx_gpio6_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; +/* + * 'hsi' class + * mipi high-speed synchronous serial interface (multichannel and full-duplex + * serial if) + */ + +static struct omap_hwmod_class_sysconfig omap44xx_hsi_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_EMUFREE | + SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | + MSTANDBY_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap44xx_hsi_hwmod_class = { + .name = "hsi", + .sysc = &omap44xx_hsi_sysc, +}; + +/* hsi */ +static struct omap_hwmod_irq_info omap44xx_hsi_irqs[] = { + { .name = "mpu_p1", .irq = 67 + OMAP44XX_IRQ_GIC_START }, + { .name = "mpu_p2", .irq = 68 + OMAP44XX_IRQ_GIC_START }, + { .name = "mpu_dma", .irq = 71 + OMAP44XX_IRQ_GIC_START }, +}; + +/* hsi master ports */ +static struct omap_hwmod_ocp_if *omap44xx_hsi_masters[] = { + &omap44xx_hsi__l3_main_2, +}; + +static struct omap_hwmod_addr_space omap44xx_hsi_addrs[] = { + { + .pa_start = 0x4a058000, + .pa_end = 0x4a05bfff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_cfg -> hsi */ +static struct omap_hwmod_ocp_if omap44xx_l4_cfg__hsi = { + .master = &omap44xx_l4_cfg_hwmod, + .slave = &omap44xx_hsi_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_hsi_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_hsi_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* hsi slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_hsi_slaves[] = { + &omap44xx_l4_cfg__hsi, +}; + +static struct omap_hwmod omap44xx_hsi_hwmod = { + .name = "hsi", + .class = &omap44xx_hsi_hwmod_class, + .mpu_irqs = omap44xx_hsi_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_hsi_irqs), + .main_clk = "hsi_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_L3INIT_HSI_CLKCTRL, + }, + }, + .slaves = omap44xx_hsi_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_hsi_slaves), + .masters = omap44xx_hsi_masters, + .masters_cnt = ARRAY_SIZE(omap44xx_hsi_masters), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + /* * 'i2c' class * multimaster high-speed i2c controller @@ -1980,6 +2289,188 @@ static struct omap_hwmod omap44xx_i2c4_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; +/* + * 'ipu' class + * imaging processor unit + */ + +static struct omap_hwmod_class omap44xx_ipu_hwmod_class = { + .name = "ipu", +}; + +/* ipu */ +static struct omap_hwmod_irq_info omap44xx_ipu_irqs[] = { + { .irq = 100 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_rst_info omap44xx_ipu_c0_resets[] = { + { .name = "cpu0", .rst_shift = 0 }, +}; + +static struct omap_hwmod_rst_info omap44xx_ipu_c1_resets[] = { + { .name = "cpu1", .rst_shift = 1 }, +}; + +static struct omap_hwmod_rst_info omap44xx_ipu_resets[] = { + { .name = "mmu_cache", .rst_shift = 2 }, +}; + +/* ipu master ports */ +static struct omap_hwmod_ocp_if *omap44xx_ipu_masters[] = { + &omap44xx_ipu__l3_main_2, +}; + +/* l3_main_2 -> ipu */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__ipu = { + .master = &omap44xx_l3_main_2_hwmod, + .slave = &omap44xx_ipu_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* ipu slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_ipu_slaves[] = { + &omap44xx_l3_main_2__ipu, +}; + +/* Pseudo hwmod for reset control purpose only */ +static struct omap_hwmod omap44xx_ipu_c0_hwmod = { + .name = "ipu_c0", + .class = &omap44xx_ipu_hwmod_class, + .flags = HWMOD_INIT_NO_RESET, + .rst_lines = omap44xx_ipu_c0_resets, + .rst_lines_cnt = ARRAY_SIZE(omap44xx_ipu_c0_resets), + .prcm = { + .omap4 = { + .rstctrl_reg = OMAP4430_RM_DUCATI_RSTCTRL, + }, + }, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* Pseudo hwmod for reset control purpose only */ +static struct omap_hwmod omap44xx_ipu_c1_hwmod = { + .name = "ipu_c1", + .class = &omap44xx_ipu_hwmod_class, + .flags = HWMOD_INIT_NO_RESET, + .rst_lines = omap44xx_ipu_c1_resets, + .rst_lines_cnt = ARRAY_SIZE(omap44xx_ipu_c1_resets), + .prcm = { + .omap4 = { + .rstctrl_reg = OMAP4430_RM_DUCATI_RSTCTRL, + }, + }, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +static struct omap_hwmod omap44xx_ipu_hwmod = { + .name = "ipu", + .class = &omap44xx_ipu_hwmod_class, + .mpu_irqs = omap44xx_ipu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_ipu_irqs), + .rst_lines = omap44xx_ipu_resets, + .rst_lines_cnt = ARRAY_SIZE(omap44xx_ipu_resets), + .main_clk = "ipu_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_DUCATI_DUCATI_CLKCTRL, + .rstctrl_reg = OMAP4430_RM_DUCATI_RSTCTRL, + }, + }, + .slaves = omap44xx_ipu_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_ipu_slaves), + .masters = omap44xx_ipu_masters, + .masters_cnt = ARRAY_SIZE(omap44xx_ipu_masters), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* + * 'iss' class + * external images sensor pixel data processor + */ + +static struct omap_hwmod_class_sysconfig omap44xx_iss_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS | + SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | + MSTANDBY_SMART), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class omap44xx_iss_hwmod_class = { + .name = "iss", + .sysc = &omap44xx_iss_sysc, +}; + +/* iss */ +static struct omap_hwmod_irq_info omap44xx_iss_irqs[] = { + { .irq = 24 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_dma_info omap44xx_iss_sdma_reqs[] = { + { .name = "1", .dma_req = 8 + OMAP44XX_DMA_REQ_START }, + { .name = "2", .dma_req = 9 + OMAP44XX_DMA_REQ_START }, + { .name = "3", .dma_req = 11 + OMAP44XX_DMA_REQ_START }, + { .name = "4", .dma_req = 12 + OMAP44XX_DMA_REQ_START }, +}; + +/* iss master ports */ +static struct omap_hwmod_ocp_if *omap44xx_iss_masters[] = { + &omap44xx_iss__l3_main_2, +}; + +static struct omap_hwmod_addr_space omap44xx_iss_addrs[] = { + { + .pa_start = 0x52000000, + .pa_end = 0x520000ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l3_main_2 -> iss */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__iss = { + .master = &omap44xx_l3_main_2_hwmod, + .slave = &omap44xx_iss_hwmod, + .clk = "l3_div_ck", + .addr = omap44xx_iss_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_iss_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* iss slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_iss_slaves[] = { + &omap44xx_l3_main_2__iss, +}; + +static struct omap_hwmod_opt_clk iss_opt_clks[] = { + { .role = "ctrlclk", .clk = "iss_ctrlclk" }, +}; + +static struct omap_hwmod omap44xx_iss_hwmod = { + .name = "iss", + .class = &omap44xx_iss_hwmod_class, + .mpu_irqs = omap44xx_iss_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_iss_irqs), + .sdma_reqs = omap44xx_iss_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_iss_sdma_reqs), + .main_clk = "iss_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_CAM_ISS_CLKCTRL, + }, + }, + .opt_clks = iss_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(iss_opt_clks), + .slaves = omap44xx_iss_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_iss_slaves), + .masters = omap44xx_iss_masters, + .masters_cnt = ARRAY_SIZE(omap44xx_iss_masters), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + /* * 'iva' class * multi-standard video encoder/decoder hardware accelerator @@ -2089,6 +2580,73 @@ static struct omap_hwmod omap44xx_iva_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; +/* + * 'kbd' class + * keyboard controller + */ + +static struct omap_hwmod_class_sysconfig omap44xx_kbd_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | + SYSC_HAS_EMUFREE | SYSC_HAS_ENAWAKEUP | + SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | + SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap44xx_kbd_hwmod_class = { + .name = "kbd", + .sysc = &omap44xx_kbd_sysc, +}; + +/* kbd */ +static struct omap_hwmod omap44xx_kbd_hwmod; +static struct omap_hwmod_irq_info omap44xx_kbd_irqs[] = { + { .irq = 120 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_kbd_addrs[] = { + { + .pa_start = 0x4a31c000, + .pa_end = 0x4a31c07f, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_wkup -> kbd */ +static struct omap_hwmod_ocp_if omap44xx_l4_wkup__kbd = { + .master = &omap44xx_l4_wkup_hwmod, + .slave = &omap44xx_kbd_hwmod, + .clk = "l4_wkup_clk_mux_ck", + .addr = omap44xx_kbd_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_kbd_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* kbd slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_kbd_slaves[] = { + &omap44xx_l4_wkup__kbd, +}; + +static struct omap_hwmod omap44xx_kbd_hwmod = { + .name = "kbd", + .class = &omap44xx_kbd_hwmod_class, + .mpu_irqs = omap44xx_kbd_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_kbd_irqs), + .main_clk = "kbd_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_WKUP_KEYBOARD_CLKCTRL, + }, + }, + .slaves = omap44xx_kbd_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_kbd_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + /* * 'mailbox' class * mailbox module allowing communication between the on-chip processors using a @@ -2436,6 +2994,98 @@ static struct omap_hwmod omap44xx_mcbsp4_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; +/* + * 'mcpdm' class + * multi channel pdm controller (proprietary interface with phoenix power + * ic) + */ + +static struct omap_hwmod_class_sysconfig omap44xx_mcpdm_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS | + SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class omap44xx_mcpdm_hwmod_class = { + .name = "mcpdm", + .sysc = &omap44xx_mcpdm_sysc, +}; + +/* mcpdm */ +static struct omap_hwmod omap44xx_mcpdm_hwmod; +static struct omap_hwmod_irq_info omap44xx_mcpdm_irqs[] = { + { .irq = 112 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_dma_info omap44xx_mcpdm_sdma_reqs[] = { + { .name = "up_link", .dma_req = 64 + OMAP44XX_DMA_REQ_START }, + { .name = "dn_link", .dma_req = 65 + OMAP44XX_DMA_REQ_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_mcpdm_addrs[] = { + { + .pa_start = 0x40132000, + .pa_end = 0x4013207f, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_abe -> mcpdm */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcpdm = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_mcpdm_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_mcpdm_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_mcpdm_addrs), + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space omap44xx_mcpdm_dma_addrs[] = { + { + .pa_start = 0x49032000, + .pa_end = 0x4903207f, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_abe -> mcpdm (dma) */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcpdm_dma = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_mcpdm_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_mcpdm_dma_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_mcpdm_dma_addrs), + .user = OCP_USER_SDMA, +}; + +/* mcpdm slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_mcpdm_slaves[] = { + &omap44xx_l4_abe__mcpdm, + &omap44xx_l4_abe__mcpdm_dma, +}; + +static struct omap_hwmod omap44xx_mcpdm_hwmod = { + .name = "mcpdm", + .class = &omap44xx_mcpdm_hwmod_class, + .mpu_irqs = omap44xx_mcpdm_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_mcpdm_irqs), + .sdma_reqs = omap44xx_mcpdm_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_mcpdm_sdma_reqs), + .main_clk = "mcpdm_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM1_ABE_PDM_CLKCTRL, + }, + }, + .slaves = omap44xx_mcpdm_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_mcpdm_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + /* * 'mcspi' class * multichannel serial port interface (mcspi) / master/slave synchronous serial @@ -2675,6 +3325,300 @@ static struct omap_hwmod omap44xx_mcspi4_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; +/* + * 'mmc' class + * multimedia card high-speed/sd/sdio (mmc/sd/sdio) host controller + */ + +static struct omap_hwmod_class_sysconfig omap44xx_mmc_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_MIDLEMODE | + SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | + MSTANDBY_SMART), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class omap44xx_mmc_hwmod_class = { + .name = "mmc", + .sysc = &omap44xx_mmc_sysc, +}; + +/* mmc1 */ +static struct omap_hwmod_irq_info omap44xx_mmc1_irqs[] = { + { .irq = 83 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_dma_info omap44xx_mmc1_sdma_reqs[] = { + { .name = "tx", .dma_req = 60 + OMAP44XX_DMA_REQ_START }, + { .name = "rx", .dma_req = 61 + OMAP44XX_DMA_REQ_START }, +}; + +/* mmc1 master ports */ +static struct omap_hwmod_ocp_if *omap44xx_mmc1_masters[] = { + &omap44xx_mmc1__l3_main_1, +}; + +static struct omap_hwmod_addr_space omap44xx_mmc1_addrs[] = { + { + .pa_start = 0x4809c000, + .pa_end = 0x4809c3ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> mmc1 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc1 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_mmc1_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_mmc1_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_mmc1_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mmc1 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_mmc1_slaves[] = { + &omap44xx_l4_per__mmc1, +}; + +static struct omap_hwmod omap44xx_mmc1_hwmod = { + .name = "mmc1", + .class = &omap44xx_mmc_hwmod_class, + .mpu_irqs = omap44xx_mmc1_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_mmc1_irqs), + .sdma_reqs = omap44xx_mmc1_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_mmc1_sdma_reqs), + .main_clk = "mmc1_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_L3INIT_MMC1_CLKCTRL, + }, + }, + .slaves = omap44xx_mmc1_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_mmc1_slaves), + .masters = omap44xx_mmc1_masters, + .masters_cnt = ARRAY_SIZE(omap44xx_mmc1_masters), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* mmc2 */ +static struct omap_hwmod_irq_info omap44xx_mmc2_irqs[] = { + { .irq = 86 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_dma_info omap44xx_mmc2_sdma_reqs[] = { + { .name = "tx", .dma_req = 46 + OMAP44XX_DMA_REQ_START }, + { .name = "rx", .dma_req = 47 + OMAP44XX_DMA_REQ_START }, +}; + +/* mmc2 master ports */ +static struct omap_hwmod_ocp_if *omap44xx_mmc2_masters[] = { + &omap44xx_mmc2__l3_main_1, +}; + +static struct omap_hwmod_addr_space omap44xx_mmc2_addrs[] = { + { + .pa_start = 0x480b4000, + .pa_end = 0x480b43ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> mmc2 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc2 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_mmc2_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_mmc2_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_mmc2_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mmc2 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_mmc2_slaves[] = { + &omap44xx_l4_per__mmc2, +}; + +static struct omap_hwmod omap44xx_mmc2_hwmod = { + .name = "mmc2", + .class = &omap44xx_mmc_hwmod_class, + .mpu_irqs = omap44xx_mmc2_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_mmc2_irqs), + .sdma_reqs = omap44xx_mmc2_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_mmc2_sdma_reqs), + .main_clk = "mmc2_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_L3INIT_MMC2_CLKCTRL, + }, + }, + .slaves = omap44xx_mmc2_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_mmc2_slaves), + .masters = omap44xx_mmc2_masters, + .masters_cnt = ARRAY_SIZE(omap44xx_mmc2_masters), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* mmc3 */ +static struct omap_hwmod omap44xx_mmc3_hwmod; +static struct omap_hwmod_irq_info omap44xx_mmc3_irqs[] = { + { .irq = 94 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_dma_info omap44xx_mmc3_sdma_reqs[] = { + { .name = "tx", .dma_req = 76 + OMAP44XX_DMA_REQ_START }, + { .name = "rx", .dma_req = 77 + OMAP44XX_DMA_REQ_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_mmc3_addrs[] = { + { + .pa_start = 0x480ad000, + .pa_end = 0x480ad3ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> mmc3 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc3 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_mmc3_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_mmc3_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_mmc3_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mmc3 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_mmc3_slaves[] = { + &omap44xx_l4_per__mmc3, +}; + +static struct omap_hwmod omap44xx_mmc3_hwmod = { + .name = "mmc3", + .class = &omap44xx_mmc_hwmod_class, + .mpu_irqs = omap44xx_mmc3_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_mmc3_irqs), + .sdma_reqs = omap44xx_mmc3_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_mmc3_sdma_reqs), + .main_clk = "mmc3_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_L4PER_MMCSD3_CLKCTRL, + }, + }, + .slaves = omap44xx_mmc3_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_mmc3_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* mmc4 */ +static struct omap_hwmod omap44xx_mmc4_hwmod; +static struct omap_hwmod_irq_info omap44xx_mmc4_irqs[] = { + { .irq = 96 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_dma_info omap44xx_mmc4_sdma_reqs[] = { + { .name = "tx", .dma_req = 56 + OMAP44XX_DMA_REQ_START }, + { .name = "rx", .dma_req = 57 + OMAP44XX_DMA_REQ_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_mmc4_addrs[] = { + { + .pa_start = 0x480d1000, + .pa_end = 0x480d13ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> mmc4 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc4 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_mmc4_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_mmc4_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_mmc4_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mmc4 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_mmc4_slaves[] = { + &omap44xx_l4_per__mmc4, +}; + +static struct omap_hwmod omap44xx_mmc4_hwmod = { + .name = "mmc4", + .class = &omap44xx_mmc_hwmod_class, + .mpu_irqs = omap44xx_mmc4_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_mmc4_irqs), + .sdma_reqs = omap44xx_mmc4_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_mmc4_sdma_reqs), + .main_clk = "mmc4_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_L4PER_MMCSD4_CLKCTRL, + }, + }, + .slaves = omap44xx_mmc4_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_mmc4_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* mmc5 */ +static struct omap_hwmod omap44xx_mmc5_hwmod; +static struct omap_hwmod_irq_info omap44xx_mmc5_irqs[] = { + { .irq = 59 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_dma_info omap44xx_mmc5_sdma_reqs[] = { + { .name = "tx", .dma_req = 58 + OMAP44XX_DMA_REQ_START }, + { .name = "rx", .dma_req = 59 + OMAP44XX_DMA_REQ_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_mmc5_addrs[] = { + { + .pa_start = 0x480d5000, + .pa_end = 0x480d53ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> mmc5 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc5 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_mmc5_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_mmc5_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_mmc5_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mmc5 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_mmc5_slaves[] = { + &omap44xx_l4_per__mmc5, +}; + +static struct omap_hwmod omap44xx_mmc5_hwmod = { + .name = "mmc5", + .class = &omap44xx_mmc_hwmod_class, + .mpu_irqs = omap44xx_mmc5_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_mmc5_irqs), + .sdma_reqs = omap44xx_mmc5_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_mmc5_sdma_reqs), + .main_clk = "mmc5_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_L4PER_MMCSD5_CLKCTRL, + }, + }, + .slaves = omap44xx_mmc5_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_mmc5_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + /* * 'mpu' class * mpu sub-system @@ -3935,6 +4879,15 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = { /* mpu_bus class */ &omap44xx_mpu_private_hwmod, + /* aess class */ +/* &omap44xx_aess_hwmod, */ + + /* bandgap class */ + &omap44xx_bandgap_hwmod, + + /* counter class */ +/* &omap44xx_counter_32k_hwmod, */ + /* dma class */ &omap44xx_dma_system_hwmod, @@ -3962,17 +4915,31 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = { &omap44xx_gpio5_hwmod, &omap44xx_gpio6_hwmod, + /* hsi class */ +/* &omap44xx_hsi_hwmod, */ + /* i2c class */ &omap44xx_i2c1_hwmod, &omap44xx_i2c2_hwmod, &omap44xx_i2c3_hwmod, &omap44xx_i2c4_hwmod, + /* ipu class */ + &omap44xx_ipu_hwmod, + &omap44xx_ipu_c0_hwmod, + &omap44xx_ipu_c1_hwmod, + + /* iss class */ +/* &omap44xx_iss_hwmod, */ + /* iva class */ &omap44xx_iva_hwmod, &omap44xx_iva_seq0_hwmod, &omap44xx_iva_seq1_hwmod, + /* kbd class */ +/* &omap44xx_kbd_hwmod, */ + /* mailbox class */ &omap44xx_mailbox_hwmod, @@ -3982,12 +4949,22 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = { &omap44xx_mcbsp3_hwmod, &omap44xx_mcbsp4_hwmod, + /* mcpdm class */ +/* &omap44xx_mcpdm_hwmod, */ + /* mcspi class */ &omap44xx_mcspi1_hwmod, &omap44xx_mcspi2_hwmod, &omap44xx_mcspi3_hwmod, &omap44xx_mcspi4_hwmod, + /* mmc class */ +/* &omap44xx_mmc1_hwmod, */ +/* &omap44xx_mmc2_hwmod, */ +/* &omap44xx_mmc3_hwmod, */ +/* &omap44xx_mmc4_hwmod, */ +/* &omap44xx_mmc5_hwmod, */ + /* mpu class */ &omap44xx_mpu_hwmod, -- cgit v1.2.3-18-g5258 From 5844c4ead25f53a1fa92a4a8f0e363f9b6b87aea Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Thu, 17 Feb 2011 12:41:05 +0000 Subject: OMAP4: hwmod data: Add USBOTG OMAP4 hwmod data structures are populated with base address, L3 and L4 interface clocks, IRQs and sysconfig register details. As per OMAP USBOTG specification, need to configure the USBOTG to smart idle/standby or no idle/standby during data transfer and force idle/standby when not in use to support retention and offmode. By setting HWMOD_SWSUP_SIDLE and HWMOD_SWSUP_MSTANDBY flags,framework will take care of configuring to no idle/standby when module is enabled and force idle/standby when idled. Signed-off-by: Cousson, Benoit Signed-off-by: Hema HK Cc: Tony Lindgren Cc: Kevin Hilman Cc: Paul Walmsley Signed-off-by: Felipe Balbi [b-cousson@ti.com: Fix position, opt_clk, and author] --- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 96 +++++++++++++++++++++++++++++- 1 file changed, 95 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 989bc967043..84e795cf064 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -62,6 +62,7 @@ static struct omap_hwmod omap44xx_mmc1_hwmod; static struct omap_hwmod omap44xx_mmc2_hwmod; static struct omap_hwmod omap44xx_mpu_hwmod; static struct omap_hwmod omap44xx_mpu_private_hwmod; +static struct omap_hwmod omap44xx_usb_otg_hs_hwmod; /* * Interconnects omap_hwmod structures @@ -344,6 +345,14 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_2 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* usb_otg_hs -> l3_main_2 */ +static struct omap_hwmod_ocp_if omap44xx_usb_otg_hs__l3_main_2 = { + .master = &omap44xx_usb_otg_hs_hwmod, + .slave = &omap44xx_l3_main_2_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* l3_main_2 slave ports */ static struct omap_hwmod_ocp_if *omap44xx_l3_main_2_slaves[] = { &omap44xx_dma_system__l3_main_2, @@ -353,6 +362,7 @@ static struct omap_hwmod_ocp_if *omap44xx_l3_main_2_slaves[] = { &omap44xx_iva__l3_main_2, &omap44xx_l3_main_1__l3_main_2, &omap44xx_l4_cfg__l3_main_2, + &omap44xx_usb_otg_hs__l3_main_2, }; static struct omap_hwmod omap44xx_l3_main_2_hwmod = { @@ -594,7 +604,6 @@ static struct omap_hwmod omap44xx_mpu_private_hwmod = { * slimbus2 * usb_host_fs * usb_host_hs - * usb_otg_hs * usb_phy_cm * usb_tll_hs * usim @@ -4724,6 +4733,88 @@ static struct omap_hwmod omap44xx_uart4_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; +/* + * 'usb_otg_hs' class + * high-speed on-the-go universal serial bus (usb_otg_hs) controller + */ + +static struct omap_hwmod_class_sysconfig omap44xx_usb_otg_hs_sysc = { + .rev_offs = 0x0400, + .sysc_offs = 0x0404, + .syss_offs = 0x0408, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP | + SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | + MSTANDBY_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap44xx_usb_otg_hs_hwmod_class = { + .name = "usb_otg_hs", + .sysc = &omap44xx_usb_otg_hs_sysc, +}; + +/* usb_otg_hs */ +static struct omap_hwmod_irq_info omap44xx_usb_otg_hs_irqs[] = { + { .name = "mc", .irq = 92 + OMAP44XX_IRQ_GIC_START }, + { .name = "dma", .irq = 93 + OMAP44XX_IRQ_GIC_START }, +}; + +/* usb_otg_hs master ports */ +static struct omap_hwmod_ocp_if *omap44xx_usb_otg_hs_masters[] = { + &omap44xx_usb_otg_hs__l3_main_2, +}; + +static struct omap_hwmod_addr_space omap44xx_usb_otg_hs_addrs[] = { + { + .pa_start = 0x4a0ab000, + .pa_end = 0x4a0ab003, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_cfg -> usb_otg_hs */ +static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_otg_hs = { + .master = &omap44xx_l4_cfg_hwmod, + .slave = &omap44xx_usb_otg_hs_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_usb_otg_hs_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_usb_otg_hs_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* usb_otg_hs slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_usb_otg_hs_slaves[] = { + &omap44xx_l4_cfg__usb_otg_hs, +}; + +static struct omap_hwmod_opt_clk usb_otg_hs_opt_clks[] = { + { .role = "xclk", .clk = "usb_otg_hs_xclk" }, +}; + +static struct omap_hwmod omap44xx_usb_otg_hs_hwmod = { + .name = "usb_otg_hs", + .class = &omap44xx_usb_otg_hs_hwmod_class, + .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, + .mpu_irqs = omap44xx_usb_otg_hs_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_usb_otg_hs_irqs), + .main_clk = "usb_otg_hs_ick", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL, + }, + }, + .opt_clks = usb_otg_hs_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(usb_otg_hs_opt_clks), + .slaves = omap44xx_usb_otg_hs_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_usb_otg_hs_slaves), + .masters = omap44xx_usb_otg_hs_masters, + .masters_cnt = ARRAY_SIZE(omap44xx_usb_otg_hs_masters), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + /* * 'wd_timer' class * 32-bit watchdog upward counter that generates a pulse on the reset pin on @@ -4995,6 +5086,9 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = { &omap44xx_uart3_hwmod, &omap44xx_uart4_hwmod, + /* usb_otg_hs class */ + &omap44xx_usb_otg_hs_hwmod, + /* wd_timer class */ &omap44xx_wd_timer2_hwmod, &omap44xx_wd_timer3_hwmod, -- cgit v1.2.3-18-g5258 From 7bb412a64281c599dcf00af2eed61ea997b282c2 Mon Sep 17 00:00:00 2001 From: Simon Que Date: Thu, 17 Feb 2011 09:52:03 -0800 Subject: omap: add hwspinlock device Build and register an hwspinlock platform device. Although only OMAP4 supports the hardware spinlock module (for now), it is still safe to run this initcall on all omaps, because hwmod lookup will simply fail on hwspinlock-less platforms. Signed-off-by: Simon Que Signed-off-by: Hari Kanigeri Signed-off-by: Ohad Ben-Cohen Cc: Benoit Cousson Cc: Kevin Hilman Cc: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Makefile | 1 + arch/arm/mach-omap2/hwspinlock.c | 63 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 64 insertions(+) create mode 100644 arch/arm/mach-omap2/hwspinlock.c (limited to 'arch') diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index a9e3974d015..ec24999eefe 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -243,3 +243,4 @@ obj-y += $(smc91x-m) $(smc91x-y) smsc911x-$(CONFIG_SMSC911X) := gpmc-smsc911x.o obj-y += $(smsc911x-m) $(smsc911x-y) +obj-$(CONFIG_ARCH_OMAP4) += hwspinlock.o diff --git a/arch/arm/mach-omap2/hwspinlock.c b/arch/arm/mach-omap2/hwspinlock.c new file mode 100644 index 00000000000..06d4a80660a --- /dev/null +++ b/arch/arm/mach-omap2/hwspinlock.c @@ -0,0 +1,63 @@ +/* + * OMAP hardware spinlock device initialization + * + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com + * + * Contact: Simon Que + * Hari Kanigeri + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include +#include +#include + +#include +#include + +struct omap_device_pm_latency omap_spinlock_latency[] = { + { + .deactivate_func = omap_device_idle_hwmods, + .activate_func = omap_device_enable_hwmods, + .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, + } +}; + +int __init hwspinlocks_init(void) +{ + int retval = 0; + struct omap_hwmod *oh; + struct omap_device *od; + const char *oh_name = "spinlock"; + const char *dev_name = "omap_hwspinlock"; + + /* + * Hwmod lookup will fail in case our platform doesn't support the + * hardware spinlock module, so it is safe to run this initcall + * on all omaps + */ + oh = omap_hwmod_lookup(oh_name); + if (oh == NULL) + return -EINVAL; + + od = omap_device_build(dev_name, 0, oh, NULL, 0, + omap_spinlock_latency, + ARRAY_SIZE(omap_spinlock_latency), false); + if (IS_ERR(od)) { + pr_err("Can't build omap_device for %s:%s\n", dev_name, + oh_name); + retval = PTR_ERR(od); + } + + return retval; +} +/* early board code might need to reserve specific hwspinlock instances */ +postcore_initcall(hwspinlocks_init); -- cgit v1.2.3-18-g5258 From 617871deacea4e1a5713dd37564dc94a392d80c3 Mon Sep 17 00:00:00 2001 From: Charulatha V Date: Thu, 17 Feb 2011 09:53:09 -0800 Subject: OMAP2420: hwmod data: Add McSPI Update the omap2420 hwmod data with the McSPI info. Add a device attribute structure which will be used for passing number of chipselects from hwmod data. Add revision macros to be passed from rev field from hwmod. Signed-off-by: Charulatha V Signed-off-by: Govindraj.R Acked-by: Grant Likely Reviewed-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod_2420_data.c | 156 +++++++++++++++++++++++++++++ arch/arm/plat-omap/include/plat/mcspi.h | 8 ++ 2 files changed, 164 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index b85c630b64d..7fffd340c76 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -18,6 +18,7 @@ #include #include #include +#include #include "omap_hwmod_common_data.h" @@ -44,6 +45,8 @@ static struct omap_hwmod omap2420_gpio2_hwmod; static struct omap_hwmod omap2420_gpio3_hwmod; static struct omap_hwmod omap2420_gpio4_hwmod; static struct omap_hwmod omap2420_dma_system_hwmod; +static struct omap_hwmod omap2420_mcspi1_hwmod; +static struct omap_hwmod omap2420_mcspi2_hwmod; /* L3 -> L4_CORE interface */ static struct omap_hwmod_ocp_if omap2420_l3_main__l4_core = { @@ -88,6 +91,42 @@ static struct omap_hwmod omap2420_uart3_hwmod; static struct omap_hwmod omap2420_i2c1_hwmod; static struct omap_hwmod omap2420_i2c2_hwmod; +/* l4 core -> mcspi1 interface */ +static struct omap_hwmod_addr_space omap2420_mcspi1_addr_space[] = { + { + .pa_start = 0x48098000, + .pa_end = 0x480980ff, + .flags = ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap2420_l4_core__mcspi1 = { + .master = &omap2420_l4_core_hwmod, + .slave = &omap2420_mcspi1_hwmod, + .clk = "mcspi1_ick", + .addr = omap2420_mcspi1_addr_space, + .addr_cnt = ARRAY_SIZE(omap2420_mcspi1_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4 core -> mcspi2 interface */ +static struct omap_hwmod_addr_space omap2420_mcspi2_addr_space[] = { + { + .pa_start = 0x4809a000, + .pa_end = 0x4809a0ff, + .flags = ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap2420_l4_core__mcspi2 = { + .master = &omap2420_l4_core_hwmod, + .slave = &omap2420_mcspi2_hwmod, + .clk = "mcspi2_ick", + .addr = omap2420_mcspi2_addr_space, + .addr_cnt = ARRAY_SIZE(omap2420_mcspi2_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* L4_CORE -> L4_WKUP interface */ static struct omap_hwmod_ocp_if omap2420_l4_core__l4_wkup = { .master = &omap2420_l4_core_hwmod, @@ -864,6 +903,119 @@ static struct omap_hwmod omap2420_dma_system_hwmod = { .flags = HWMOD_NO_IDLEST, }; +/* + * 'mcspi' class + * multichannel serial port interface (mcspi) / master/slave synchronous serial + * bus + */ + +static struct omap_hwmod_class_sysconfig omap2420_mcspi_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2420_mcspi_class = { + .name = "mcspi", + .sysc = &omap2420_mcspi_sysc, + .rev = OMAP2_MCSPI_REV, +}; + +/* mcspi1 */ +static struct omap_hwmod_irq_info omap2420_mcspi1_mpu_irqs[] = { + { .irq = 65 }, +}; + +static struct omap_hwmod_dma_info omap2420_mcspi1_sdma_reqs[] = { + { .name = "tx0", .dma_req = 35 }, /* DMA_SPI1_TX0 */ + { .name = "rx0", .dma_req = 36 }, /* DMA_SPI1_RX0 */ + { .name = "tx1", .dma_req = 37 }, /* DMA_SPI1_TX1 */ + { .name = "rx1", .dma_req = 38 }, /* DMA_SPI1_RX1 */ + { .name = "tx2", .dma_req = 39 }, /* DMA_SPI1_TX2 */ + { .name = "rx2", .dma_req = 40 }, /* DMA_SPI1_RX2 */ + { .name = "tx3", .dma_req = 41 }, /* DMA_SPI1_TX3 */ + { .name = "rx3", .dma_req = 42 }, /* DMA_SPI1_RX3 */ +}; + +static struct omap_hwmod_ocp_if *omap2420_mcspi1_slaves[] = { + &omap2420_l4_core__mcspi1, +}; + +static struct omap2_mcspi_dev_attr omap_mcspi1_dev_attr = { + .num_chipselect = 4, +}; + +static struct omap_hwmod omap2420_mcspi1_hwmod = { + .name = "mcspi1_hwmod", + .mpu_irqs = omap2420_mcspi1_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2420_mcspi1_mpu_irqs), + .sdma_reqs = omap2420_mcspi1_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap2420_mcspi1_sdma_reqs), + .main_clk = "mcspi1_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_MCSPI1_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_MCSPI1_SHIFT, + }, + }, + .slaves = omap2420_mcspi1_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_mcspi1_slaves), + .class = &omap2420_mcspi_class, + .dev_attr = &omap_mcspi1_dev_attr, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), +}; + +/* mcspi2 */ +static struct omap_hwmod_irq_info omap2420_mcspi2_mpu_irqs[] = { + { .irq = 66 }, +}; + +static struct omap_hwmod_dma_info omap2420_mcspi2_sdma_reqs[] = { + { .name = "tx0", .dma_req = 43 }, /* DMA_SPI2_TX0 */ + { .name = "rx0", .dma_req = 44 }, /* DMA_SPI2_RX0 */ + { .name = "tx1", .dma_req = 45 }, /* DMA_SPI2_TX1 */ + { .name = "rx1", .dma_req = 46 }, /* DMA_SPI2_RX1 */ +}; + +static struct omap_hwmod_ocp_if *omap2420_mcspi2_slaves[] = { + &omap2420_l4_core__mcspi2, +}; + +static struct omap2_mcspi_dev_attr omap_mcspi2_dev_attr = { + .num_chipselect = 2, +}; + +static struct omap_hwmod omap2420_mcspi2_hwmod = { + .name = "mcspi2_hwmod", + .mpu_irqs = omap2420_mcspi2_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2420_mcspi2_mpu_irqs), + .sdma_reqs = omap2420_mcspi2_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap2420_mcspi2_sdma_reqs), + .main_clk = "mcspi2_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_MCSPI2_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_MCSPI2_SHIFT, + }, + }, + .slaves = omap2420_mcspi2_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_mcspi2_slaves), + .class = &omap2420_mcspi_class, + .dev_attr = &omap_mcspi2_dev_attr, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), +}; + static __initdata struct omap_hwmod *omap2420_hwmods[] = { &omap2420_l3_main_hwmod, &omap2420_l4_core_hwmod, @@ -885,6 +1037,10 @@ static __initdata struct omap_hwmod *omap2420_hwmods[] = { /* dma_system class*/ &omap2420_dma_system_hwmod, + + /* mcspi class */ + &omap2420_mcspi1_hwmod, + &omap2420_mcspi2_hwmod, NULL, }; diff --git a/arch/arm/plat-omap/include/plat/mcspi.h b/arch/arm/plat-omap/include/plat/mcspi.h index 1254e4945b6..560e266da8a 100644 --- a/arch/arm/plat-omap/include/plat/mcspi.h +++ b/arch/arm/plat-omap/include/plat/mcspi.h @@ -1,10 +1,18 @@ #ifndef _OMAP2_MCSPI_H #define _OMAP2_MCSPI_H +#define OMAP2_MCSPI_REV 0 +#define OMAP3_MCSPI_REV 1 +#define OMAP4_MCSPI_REV 2 + struct omap2_mcspi_platform_config { unsigned short num_cs; }; +struct omap2_mcspi_dev_attr { + unsigned short num_chipselect; +}; + struct omap2_mcspi_device_config { unsigned turbo_mode:1; -- cgit v1.2.3-18-g5258 From 7f904c78d65e5cff8d9e76567797a7a7fe2fd774 Mon Sep 17 00:00:00 2001 From: Charulatha V Date: Thu, 17 Feb 2011 09:53:10 -0800 Subject: OMAP2430: hwmod data: Add McSPI Update the 2430 hwmod data file with McSPI info. Signed-off-by: Charulatha V Signed-off-by: Govindraj.R Acked-by: Grant Likely Reviewed-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod_2430_data.c | 219 +++++++++++++++++++++++++++++ 1 file changed, 219 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 8ecfbcde13b..60fe4aac1f5 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -18,6 +18,7 @@ #include #include #include +#include #include "omap_hwmod_common_data.h" @@ -45,6 +46,9 @@ static struct omap_hwmod omap2430_gpio3_hwmod; static struct omap_hwmod omap2430_gpio4_hwmod; static struct omap_hwmod omap2430_gpio5_hwmod; static struct omap_hwmod omap2430_dma_system_hwmod; +static struct omap_hwmod omap2430_mcspi1_hwmod; +static struct omap_hwmod omap2430_mcspi2_hwmod; +static struct omap_hwmod omap2430_mcspi3_hwmod; /* L3 -> L4_CORE interface */ static struct omap_hwmod_ocp_if omap2430_l3_main__l4_core = { @@ -223,6 +227,60 @@ static struct omap_hwmod_ocp_if *omap2430_l4_wkup_slaves[] = { static struct omap_hwmod_ocp_if *omap2430_l4_wkup_masters[] = { }; +/* l4 core -> mcspi1 interface */ +static struct omap_hwmod_addr_space omap2430_mcspi1_addr_space[] = { + { + .pa_start = 0x48098000, + .pa_end = 0x480980ff, + .flags = ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap2430_l4_core__mcspi1 = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_mcspi1_hwmod, + .clk = "mcspi1_ick", + .addr = omap2430_mcspi1_addr_space, + .addr_cnt = ARRAY_SIZE(omap2430_mcspi1_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4 core -> mcspi2 interface */ +static struct omap_hwmod_addr_space omap2430_mcspi2_addr_space[] = { + { + .pa_start = 0x4809a000, + .pa_end = 0x4809a0ff, + .flags = ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap2430_l4_core__mcspi2 = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_mcspi2_hwmod, + .clk = "mcspi2_ick", + .addr = omap2430_mcspi2_addr_space, + .addr_cnt = ARRAY_SIZE(omap2430_mcspi2_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4 core -> mcspi3 interface */ +static struct omap_hwmod_addr_space omap2430_mcspi3_addr_space[] = { + { + .pa_start = 0x480b8000, + .pa_end = 0x480b80ff, + .flags = ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap2430_l4_core__mcspi3 = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_mcspi3_hwmod, + .clk = "mcspi3_ick", + .addr = omap2430_mcspi3_addr_space, + .addr_cnt = ARRAY_SIZE(omap2430_mcspi3_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* L4 WKUP */ static struct omap_hwmod omap2430_l4_wkup_hwmod = { .name = "l4_wkup", @@ -919,6 +977,162 @@ static struct omap_hwmod omap2430_dma_system_hwmod = { .flags = HWMOD_NO_IDLEST, }; +/* + * 'mcspi' class + * multichannel serial port interface (mcspi) / master/slave synchronous serial + * bus + */ + +static struct omap_hwmod_class_sysconfig omap2430_mcspi_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2430_mcspi_class = { + .name = "mcspi", + .sysc = &omap2430_mcspi_sysc, + .rev = OMAP2_MCSPI_REV, +}; + +/* mcspi1 */ +static struct omap_hwmod_irq_info omap2430_mcspi1_mpu_irqs[] = { + { .irq = 65 }, +}; + +static struct omap_hwmod_dma_info omap2430_mcspi1_sdma_reqs[] = { + { .name = "tx0", .dma_req = 35 }, /* DMA_SPI1_TX0 */ + { .name = "rx0", .dma_req = 36 }, /* DMA_SPI1_RX0 */ + { .name = "tx1", .dma_req = 37 }, /* DMA_SPI1_TX1 */ + { .name = "rx1", .dma_req = 38 }, /* DMA_SPI1_RX1 */ + { .name = "tx2", .dma_req = 39 }, /* DMA_SPI1_TX2 */ + { .name = "rx2", .dma_req = 40 }, /* DMA_SPI1_RX2 */ + { .name = "tx3", .dma_req = 41 }, /* DMA_SPI1_TX3 */ + { .name = "rx3", .dma_req = 42 }, /* DMA_SPI1_RX3 */ +}; + +static struct omap_hwmod_ocp_if *omap2430_mcspi1_slaves[] = { + &omap2430_l4_core__mcspi1, +}; + +static struct omap2_mcspi_dev_attr omap_mcspi1_dev_attr = { + .num_chipselect = 4, +}; + +static struct omap_hwmod omap2430_mcspi1_hwmod = { + .name = "mcspi1_hwmod", + .mpu_irqs = omap2430_mcspi1_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2430_mcspi1_mpu_irqs), + .sdma_reqs = omap2430_mcspi1_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap2430_mcspi1_sdma_reqs), + .main_clk = "mcspi1_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_MCSPI1_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_MCSPI1_SHIFT, + }, + }, + .slaves = omap2430_mcspi1_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_mcspi1_slaves), + .class = &omap2430_mcspi_class, + .dev_attr = &omap_mcspi1_dev_attr, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), +}; + +/* mcspi2 */ +static struct omap_hwmod_irq_info omap2430_mcspi2_mpu_irqs[] = { + { .irq = 66 }, +}; + +static struct omap_hwmod_dma_info omap2430_mcspi2_sdma_reqs[] = { + { .name = "tx0", .dma_req = 43 }, /* DMA_SPI2_TX0 */ + { .name = "rx0", .dma_req = 44 }, /* DMA_SPI2_RX0 */ + { .name = "tx1", .dma_req = 45 }, /* DMA_SPI2_TX1 */ + { .name = "rx1", .dma_req = 46 }, /* DMA_SPI2_RX1 */ +}; + +static struct omap_hwmod_ocp_if *omap2430_mcspi2_slaves[] = { + &omap2430_l4_core__mcspi2, +}; + +static struct omap2_mcspi_dev_attr omap_mcspi2_dev_attr = { + .num_chipselect = 2, +}; + +static struct omap_hwmod omap2430_mcspi2_hwmod = { + .name = "mcspi2_hwmod", + .mpu_irqs = omap2430_mcspi2_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2430_mcspi2_mpu_irqs), + .sdma_reqs = omap2430_mcspi2_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap2430_mcspi2_sdma_reqs), + .main_clk = "mcspi2_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_MCSPI2_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_MCSPI2_SHIFT, + }, + }, + .slaves = omap2430_mcspi2_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_mcspi2_slaves), + .class = &omap2430_mcspi_class, + .dev_attr = &omap_mcspi2_dev_attr, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), +}; + +/* mcspi3 */ +static struct omap_hwmod_irq_info omap2430_mcspi3_mpu_irqs[] = { + { .irq = 91 }, +}; + +static struct omap_hwmod_dma_info omap2430_mcspi3_sdma_reqs[] = { + { .name = "tx0", .dma_req = 15 }, /* DMA_SPI3_TX0 */ + { .name = "rx0", .dma_req = 16 }, /* DMA_SPI3_RX0 */ + { .name = "tx1", .dma_req = 23 }, /* DMA_SPI3_TX1 */ + { .name = "rx1", .dma_req = 24 }, /* DMA_SPI3_RX1 */ +}; + +static struct omap_hwmod_ocp_if *omap2430_mcspi3_slaves[] = { + &omap2430_l4_core__mcspi3, +}; + +static struct omap2_mcspi_dev_attr omap_mcspi3_dev_attr = { + .num_chipselect = 2, +}; + +static struct omap_hwmod omap2430_mcspi3_hwmod = { + .name = "mcspi3_hwmod", + .mpu_irqs = omap2430_mcspi3_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2430_mcspi3_mpu_irqs), + .sdma_reqs = omap2430_mcspi3_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap2430_mcspi3_sdma_reqs), + .main_clk = "mcspi3_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 2, + .module_bit = OMAP2430_EN_MCSPI3_SHIFT, + .idlest_reg_id = 2, + .idlest_idle_bit = OMAP2430_ST_MCSPI3_SHIFT, + }, + }, + .slaves = omap2430_mcspi3_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_mcspi3_slaves), + .class = &omap2430_mcspi_class, + .dev_attr = &omap_mcspi3_dev_attr, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), +}; + static __initdata struct omap_hwmod *omap2430_hwmods[] = { &omap2430_l3_main_hwmod, &omap2430_l4_core_hwmod, @@ -941,6 +1155,11 @@ static __initdata struct omap_hwmod *omap2430_hwmods[] = { /* dma_system class*/ &omap2430_dma_system_hwmod, + + /* mcspi class */ + &omap2430_mcspi1_hwmod, + &omap2430_mcspi2_hwmod, + &omap2430_mcspi3_hwmod, NULL, }; -- cgit v1.2.3-18-g5258 From 0f616a4e17ea244f882056656964b792edde8364 Mon Sep 17 00:00:00 2001 From: Charulatha V Date: Thu, 17 Feb 2011 09:53:10 -0800 Subject: OMAP3: hwmod data: Add McSPI Update omap3 hwmod data file with McSPI info. Signed-off-by: Charulatha V Signed-off-by: Govindraj.R Acked-by: Grant Likely Reviewed-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 280 +++++++++++++++++++++++++++++ 1 file changed, 280 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 8d8181334f8..800eda4adb5 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -22,6 +22,7 @@ #include #include #include +#include #include "omap_hwmod_common_data.h" @@ -55,6 +56,10 @@ static struct omap_hwmod omap3xxx_gpio5_hwmod; static struct omap_hwmod omap3xxx_gpio6_hwmod; static struct omap_hwmod omap34xx_sr1_hwmod; static struct omap_hwmod omap34xx_sr2_hwmod; +static struct omap_hwmod omap34xx_mcspi1; +static struct omap_hwmod omap34xx_mcspi2; +static struct omap_hwmod omap34xx_mcspi3; +static struct omap_hwmod omap34xx_mcspi4; static struct omap_hwmod omap3xxx_dma_system_hwmod; @@ -1356,6 +1361,275 @@ static struct omap_hwmod omap36xx_sr2_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3630ES1), }; +/* l4 core -> mcspi1 interface */ +static struct omap_hwmod_addr_space omap34xx_mcspi1_addr_space[] = { + { + .pa_start = 0x48098000, + .pa_end = 0x480980ff, + .flags = ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi1 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap34xx_mcspi1, + .clk = "mcspi1_ick", + .addr = omap34xx_mcspi1_addr_space, + .addr_cnt = ARRAY_SIZE(omap34xx_mcspi1_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4 core -> mcspi2 interface */ +static struct omap_hwmod_addr_space omap34xx_mcspi2_addr_space[] = { + { + .pa_start = 0x4809a000, + .pa_end = 0x4809a0ff, + .flags = ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi2 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap34xx_mcspi2, + .clk = "mcspi2_ick", + .addr = omap34xx_mcspi2_addr_space, + .addr_cnt = ARRAY_SIZE(omap34xx_mcspi2_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4 core -> mcspi3 interface */ +static struct omap_hwmod_addr_space omap34xx_mcspi3_addr_space[] = { + { + .pa_start = 0x480b8000, + .pa_end = 0x480b80ff, + .flags = ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi3 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap34xx_mcspi3, + .clk = "mcspi3_ick", + .addr = omap34xx_mcspi3_addr_space, + .addr_cnt = ARRAY_SIZE(omap34xx_mcspi3_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4 core -> mcspi4 interface */ +static struct omap_hwmod_addr_space omap34xx_mcspi4_addr_space[] = { + { + .pa_start = 0x480ba000, + .pa_end = 0x480ba0ff, + .flags = ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi4 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap34xx_mcspi4, + .clk = "mcspi4_ick", + .addr = omap34xx_mcspi4_addr_space, + .addr_cnt = ARRAY_SIZE(omap34xx_mcspi4_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* + * 'mcspi' class + * multichannel serial port interface (mcspi) / master/slave synchronous serial + * bus + */ + +static struct omap_hwmod_class_sysconfig omap34xx_mcspi_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap34xx_mcspi_class = { + .name = "mcspi", + .sysc = &omap34xx_mcspi_sysc, + .rev = OMAP3_MCSPI_REV, +}; + +/* mcspi1 */ +static struct omap_hwmod_irq_info omap34xx_mcspi1_mpu_irqs[] = { + { .name = "irq", .irq = 65 }, +}; + +static struct omap_hwmod_dma_info omap34xx_mcspi1_sdma_reqs[] = { + { .name = "tx0", .dma_req = 35 }, + { .name = "rx0", .dma_req = 36 }, + { .name = "tx1", .dma_req = 37 }, + { .name = "rx1", .dma_req = 38 }, + { .name = "tx2", .dma_req = 39 }, + { .name = "rx2", .dma_req = 40 }, + { .name = "tx3", .dma_req = 41 }, + { .name = "rx3", .dma_req = 42 }, +}; + +static struct omap_hwmod_ocp_if *omap34xx_mcspi1_slaves[] = { + &omap34xx_l4_core__mcspi1, +}; + +static struct omap2_mcspi_dev_attr omap_mcspi1_dev_attr = { + .num_chipselect = 4, +}; + +static struct omap_hwmod omap34xx_mcspi1 = { + .name = "mcspi1", + .mpu_irqs = omap34xx_mcspi1_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap34xx_mcspi1_mpu_irqs), + .sdma_reqs = omap34xx_mcspi1_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap34xx_mcspi1_sdma_reqs), + .main_clk = "mcspi1_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_MCSPI1_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_MCSPI1_SHIFT, + }, + }, + .slaves = omap34xx_mcspi1_slaves, + .slaves_cnt = ARRAY_SIZE(omap34xx_mcspi1_slaves), + .class = &omap34xx_mcspi_class, + .dev_attr = &omap_mcspi1_dev_attr, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +/* mcspi2 */ +static struct omap_hwmod_irq_info omap34xx_mcspi2_mpu_irqs[] = { + { .name = "irq", .irq = 66 }, +}; + +static struct omap_hwmod_dma_info omap34xx_mcspi2_sdma_reqs[] = { + { .name = "tx0", .dma_req = 43 }, + { .name = "rx0", .dma_req = 44 }, + { .name = "tx1", .dma_req = 45 }, + { .name = "rx1", .dma_req = 46 }, +}; + +static struct omap_hwmod_ocp_if *omap34xx_mcspi2_slaves[] = { + &omap34xx_l4_core__mcspi2, +}; + +static struct omap2_mcspi_dev_attr omap_mcspi2_dev_attr = { + .num_chipselect = 2, +}; + +static struct omap_hwmod omap34xx_mcspi2 = { + .name = "mcspi2", + .mpu_irqs = omap34xx_mcspi2_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap34xx_mcspi2_mpu_irqs), + .sdma_reqs = omap34xx_mcspi2_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap34xx_mcspi2_sdma_reqs), + .main_clk = "mcspi2_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_MCSPI2_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_MCSPI2_SHIFT, + }, + }, + .slaves = omap34xx_mcspi2_slaves, + .slaves_cnt = ARRAY_SIZE(omap34xx_mcspi2_slaves), + .class = &omap34xx_mcspi_class, + .dev_attr = &omap_mcspi2_dev_attr, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +/* mcspi3 */ +static struct omap_hwmod_irq_info omap34xx_mcspi3_mpu_irqs[] = { + { .name = "irq", .irq = 91 }, /* 91 */ +}; + +static struct omap_hwmod_dma_info omap34xx_mcspi3_sdma_reqs[] = { + { .name = "tx0", .dma_req = 15 }, + { .name = "rx0", .dma_req = 16 }, + { .name = "tx1", .dma_req = 23 }, + { .name = "rx1", .dma_req = 24 }, +}; + +static struct omap_hwmod_ocp_if *omap34xx_mcspi3_slaves[] = { + &omap34xx_l4_core__mcspi3, +}; + +static struct omap2_mcspi_dev_attr omap_mcspi3_dev_attr = { + .num_chipselect = 2, +}; + +static struct omap_hwmod omap34xx_mcspi3 = { + .name = "mcspi3", + .mpu_irqs = omap34xx_mcspi3_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap34xx_mcspi3_mpu_irqs), + .sdma_reqs = omap34xx_mcspi3_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap34xx_mcspi3_sdma_reqs), + .main_clk = "mcspi3_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_MCSPI3_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_MCSPI3_SHIFT, + }, + }, + .slaves = omap34xx_mcspi3_slaves, + .slaves_cnt = ARRAY_SIZE(omap34xx_mcspi3_slaves), + .class = &omap34xx_mcspi_class, + .dev_attr = &omap_mcspi3_dev_attr, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +/* SPI4 */ +static struct omap_hwmod_irq_info omap34xx_mcspi4_mpu_irqs[] = { + { .name = "irq", .irq = INT_34XX_SPI4_IRQ }, /* 48 */ +}; + +static struct omap_hwmod_dma_info omap34xx_mcspi4_sdma_reqs[] = { + { .name = "tx0", .dma_req = 70 }, /* DMA_SPI4_TX0 */ + { .name = "rx0", .dma_req = 71 }, /* DMA_SPI4_RX0 */ +}; + +static struct omap_hwmod_ocp_if *omap34xx_mcspi4_slaves[] = { + &omap34xx_l4_core__mcspi4, +}; + +static struct omap2_mcspi_dev_attr omap_mcspi4_dev_attr = { + .num_chipselect = 1, +}; + +static struct omap_hwmod omap34xx_mcspi4 = { + .name = "mcspi4", + .mpu_irqs = omap34xx_mcspi4_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap34xx_mcspi4_mpu_irqs), + .sdma_reqs = omap34xx_mcspi4_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap34xx_mcspi4_sdma_reqs), + .main_clk = "mcspi4_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_MCSPI4_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_MCSPI4_SHIFT, + }, + }, + .slaves = omap34xx_mcspi4_slaves, + .slaves_cnt = ARRAY_SIZE(omap34xx_mcspi4_slaves), + .class = &omap34xx_mcspi_class, + .dev_attr = &omap_mcspi4_dev_attr, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { &omap3xxx_l3_main_hwmod, &omap3xxx_l4_core_hwmod, @@ -1387,6 +1661,12 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { /* dma_system class*/ &omap3xxx_dma_system_hwmod, + + /* mcspi class */ + &omap34xx_mcspi1, + &omap34xx_mcspi2, + &omap34xx_mcspi3, + &omap34xx_mcspi4, NULL, }; -- cgit v1.2.3-18-g5258 From 1a5d81905aec1536783fb6ab875f31910f449941 Mon Sep 17 00:00:00 2001 From: Charulatha V Date: Wed, 2 Feb 2011 17:52:14 +0530 Subject: OMAP: devices: Modify McSPI device to adapt to hwmod framework Cleans up all base address definitions for omap_mcspi and adapts the device registration and driver to hwmod framework. Changes involves: 1) Removing all base address macro defines. 2) Using omap-device layer to register device and utilizing data from hwmod data file for base address, dma channel number, Irq_number, device attribute(number of chipselect). 3) Appending base address with pdata reg_offset for omap4 boards. For omap4 all regs used in driver deviate with reg_offset_macros defined with an value of 0x100. So pass this offset through pdata and append the same to base address retrieved from hwmod data file and we are not mapping *_HL_* regs which are not used in driver. Signed-off-by: Charulatha V Signed-off-by: Govindraj.R Acked-by: Grant Likely Reviewed-by: Partha Basak Reviewed-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/devices.c | 187 +++++++------------------------- arch/arm/plat-omap/include/plat/mcspi.h | 3 + 2 files changed, 43 insertions(+), 147 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index e0f0ef952bc..71f099b85e7 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include @@ -279,163 +280,55 @@ static inline void omap_init_audio(void) {} #include -#define OMAP2_MCSPI1_BASE 0x48098000 -#define OMAP2_MCSPI2_BASE 0x4809a000 -#define OMAP2_MCSPI3_BASE 0x480b8000 -#define OMAP2_MCSPI4_BASE 0x480ba000 - -#define OMAP4_MCSPI1_BASE 0x48098100 -#define OMAP4_MCSPI2_BASE 0x4809a100 -#define OMAP4_MCSPI3_BASE 0x480b8100 -#define OMAP4_MCSPI4_BASE 0x480ba100 - -static struct omap2_mcspi_platform_config omap2_mcspi1_config = { - .num_cs = 4, -}; - -static struct resource omap2_mcspi1_resources[] = { - { - .start = OMAP2_MCSPI1_BASE, - .end = OMAP2_MCSPI1_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device omap2_mcspi1 = { - .name = "omap2_mcspi", - .id = 1, - .num_resources = ARRAY_SIZE(omap2_mcspi1_resources), - .resource = omap2_mcspi1_resources, - .dev = { - .platform_data = &omap2_mcspi1_config, - }, -}; - -static struct omap2_mcspi_platform_config omap2_mcspi2_config = { - .num_cs = 2, -}; - -static struct resource omap2_mcspi2_resources[] = { - { - .start = OMAP2_MCSPI2_BASE, - .end = OMAP2_MCSPI2_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device omap2_mcspi2 = { - .name = "omap2_mcspi", - .id = 2, - .num_resources = ARRAY_SIZE(omap2_mcspi2_resources), - .resource = omap2_mcspi2_resources, - .dev = { - .platform_data = &omap2_mcspi2_config, - }, -}; - -#if defined(CONFIG_SOC_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \ - defined(CONFIG_ARCH_OMAP4) -static struct omap2_mcspi_platform_config omap2_mcspi3_config = { - .num_cs = 2, -}; - -static struct resource omap2_mcspi3_resources[] = { - { - .start = OMAP2_MCSPI3_BASE, - .end = OMAP2_MCSPI3_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device omap2_mcspi3 = { - .name = "omap2_mcspi", - .id = 3, - .num_resources = ARRAY_SIZE(omap2_mcspi3_resources), - .resource = omap2_mcspi3_resources, - .dev = { - .platform_data = &omap2_mcspi3_config, - }, -}; -#endif - -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) -static struct omap2_mcspi_platform_config omap2_mcspi4_config = { - .num_cs = 1, -}; - -static struct resource omap2_mcspi4_resources[] = { - { - .start = OMAP2_MCSPI4_BASE, - .end = OMAP2_MCSPI4_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device omap2_mcspi4 = { - .name = "omap2_mcspi", - .id = 4, - .num_resources = ARRAY_SIZE(omap2_mcspi4_resources), - .resource = omap2_mcspi4_resources, - .dev = { - .platform_data = &omap2_mcspi4_config, +struct omap_device_pm_latency omap_mcspi_latency[] = { + [0] = { + .deactivate_func = omap_device_idle_hwmods, + .activate_func = omap_device_enable_hwmods, + .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, }, }; -#endif -#ifdef CONFIG_ARCH_OMAP4 -static inline void omap4_mcspi_fixup(void) +static int omap_mcspi_init(struct omap_hwmod *oh, void *unused) { - omap2_mcspi1_resources[0].start = OMAP4_MCSPI1_BASE; - omap2_mcspi1_resources[0].end = OMAP4_MCSPI1_BASE + 0xff; - omap2_mcspi2_resources[0].start = OMAP4_MCSPI2_BASE; - omap2_mcspi2_resources[0].end = OMAP4_MCSPI2_BASE + 0xff; - omap2_mcspi3_resources[0].start = OMAP4_MCSPI3_BASE; - omap2_mcspi3_resources[0].end = OMAP4_MCSPI3_BASE + 0xff; - omap2_mcspi4_resources[0].start = OMAP4_MCSPI4_BASE; - omap2_mcspi4_resources[0].end = OMAP4_MCSPI4_BASE + 0xff; -} -#else -static inline void omap4_mcspi_fixup(void) -{ -} -#endif + struct omap_device *od; + char *name = "omap2_mcspi"; + struct omap2_mcspi_platform_config *pdata; + static int spi_num; + struct omap2_mcspi_dev_attr *mcspi_attrib = oh->dev_attr; + + pdata = kzalloc(sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + pr_err("Memory allocation for McSPI device failed\n"); + return -ENOMEM; + } -#if defined(CONFIG_SOC_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \ - defined(CONFIG_ARCH_OMAP4) -static inline void omap2_mcspi3_init(void) -{ - platform_device_register(&omap2_mcspi3); -} -#else -static inline void omap2_mcspi3_init(void) -{ -} -#endif + pdata->num_cs = mcspi_attrib->num_chipselect; + switch (oh->class->rev) { + case OMAP2_MCSPI_REV: + case OMAP3_MCSPI_REV: + pdata->regs_offset = 0; + break; + case OMAP4_MCSPI_REV: + pdata->regs_offset = OMAP4_MCSPI_REG_OFFSET; + break; + default: + pr_err("Invalid McSPI Revision value\n"); + return -EINVAL; + } -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) -static inline void omap2_mcspi4_init(void) -{ - platform_device_register(&omap2_mcspi4); -} -#else -static inline void omap2_mcspi4_init(void) -{ + spi_num++; + od = omap_device_build(name, spi_num, oh, pdata, + sizeof(*pdata), omap_mcspi_latency, + ARRAY_SIZE(omap_mcspi_latency), 0); + WARN(IS_ERR(od), "Cant build omap_device for %s:%s\n", + name, oh->name); + kfree(pdata); + return 0; } -#endif static void omap_init_mcspi(void) { - if (cpu_is_omap44xx()) - omap4_mcspi_fixup(); - - platform_device_register(&omap2_mcspi1); - platform_device_register(&omap2_mcspi2); - - if (cpu_is_omap2430() || cpu_is_omap343x() || cpu_is_omap44xx()) - omap2_mcspi3_init(); - - if (cpu_is_omap343x() || cpu_is_omap44xx()) - omap2_mcspi4_init(); + omap_hwmod_for_each_by_class("mcspi", omap_mcspi_init, NULL); } #else diff --git a/arch/arm/plat-omap/include/plat/mcspi.h b/arch/arm/plat-omap/include/plat/mcspi.h index 560e266da8a..3d51b18131c 100644 --- a/arch/arm/plat-omap/include/plat/mcspi.h +++ b/arch/arm/plat-omap/include/plat/mcspi.h @@ -5,8 +5,11 @@ #define OMAP3_MCSPI_REV 1 #define OMAP4_MCSPI_REV 2 +#define OMAP4_MCSPI_REG_OFFSET 0x100 + struct omap2_mcspi_platform_config { unsigned short num_cs; + unsigned int regs_offset; }; struct omap2_mcspi_dev_attr { -- cgit v1.2.3-18-g5258 From 7050f915c0c17a603a0a2ddf00e6edcc188789d3 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Thu, 17 Feb 2011 09:55:03 -0800 Subject: omap2plus: omap4: Set NR_CPU to 2 instead of default 4 The omap2plus_defconfig picks default NR_CPU value as 4 which isn't correct for OMAP4430. Available CPUs are ony 2, so fix the same. Signed-off-by: Santosh Shilimkar Signed-off-by: Tony Lindgren --- arch/arm/configs/omap2plus_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index ae890caa17a..019fb7c67dc 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -58,6 +58,7 @@ CONFIG_ARM_ERRATA_411920=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_SMP=y +CONFIG_NR_CPUS=2 # CONFIG_LOCAL_TIMERS is not set CONFIG_AEABI=y CONFIG_LEDS=y -- cgit v1.2.3-18-g5258 From b9b35ade88d5855de0ac3ebc3d66881f799114f9 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Thu, 17 Feb 2011 09:55:03 -0800 Subject: omap4: Remove 'FIXME: omap44xx_sram_init not implemented' The omap44xx_sram_init() implements functionality to push some code on SRAM whenever the code can't be executed from external memory. The low power and DVFS code can be executed from external DDR itself thanks to OMAP4 memory controller hardware support. So on OMAP4, sram_push kind of functionality isn't needed. Hence remove the FIXME warning added for implementing sram push feature on OMAP4. Signed-off-by: Santosh Shilimkar Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/sram.c | 16 ---------------- 1 file changed, 16 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index aedcb3be4e6..9d80064e979 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -405,20 +405,6 @@ static inline int omap34xx_sram_init(void) } #endif -#ifdef CONFIG_ARCH_OMAP4 -static int __init omap44xx_sram_init(void) -{ - printk(KERN_ERR "FIXME: %s not implemented\n", __func__); - - return -ENODEV; -} -#else -static inline int omap44xx_sram_init(void) -{ - return 0; -} -#endif - int __init omap_sram_init(void) { omap_detect_sram(); @@ -432,8 +418,6 @@ int __init omap_sram_init(void) omap243x_sram_init(); else if (cpu_is_omap34xx()) omap34xx_sram_init(); - else if (cpu_is_omap44xx()) - omap44xx_sram_init(); return 0; } -- cgit v1.2.3-18-g5258 From 59556765cd30467ff64a391906ad8eb68f886ad3 Mon Sep 17 00:00:00 2001 From: Syed Rafiuddin Date: Mon, 27 Dec 2010 05:51:45 +0000 Subject: OMAP4: keypad: Add the board support -Add the platform changes for the keypad driver -Register keyboard device with hwmod framework. Signed-off-by: Syed Rafiuddin Signed-off-by: Abraham Arce Signed-off-by: Shubhrajyoti D Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-4430sdp.c | 89 +++++++++++++++++++++++++++++++++++++ arch/arm/mach-omap2/devices.c | 41 +++++++++++++++++ 2 files changed, 130 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 12d99e582cd..dcc8b27e303 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -35,6 +35,7 @@ #include #include #include +#include #include "mux.h" #include "hsmmc.h" @@ -48,6 +49,90 @@ #define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO 184 #define OMAP4_SFH7741_ENABLE_GPIO 188 +static const int sdp4430_keymap[] = { + KEY(0, 0, KEY_E), + KEY(0, 1, KEY_R), + KEY(0, 2, KEY_T), + KEY(0, 3, KEY_HOME), + KEY(0, 4, KEY_F5), + KEY(0, 5, KEY_UNKNOWN), + KEY(0, 6, KEY_I), + KEY(0, 7, KEY_LEFTSHIFT), + + KEY(1, 0, KEY_D), + KEY(1, 1, KEY_F), + KEY(1, 2, KEY_G), + KEY(1, 3, KEY_SEND), + KEY(1, 4, KEY_F6), + KEY(1, 5, KEY_UNKNOWN), + KEY(1, 6, KEY_K), + KEY(1, 7, KEY_ENTER), + + KEY(2, 0, KEY_X), + KEY(2, 1, KEY_C), + KEY(2, 2, KEY_V), + KEY(2, 3, KEY_END), + KEY(2, 4, KEY_F7), + KEY(2, 5, KEY_UNKNOWN), + KEY(2, 6, KEY_DOT), + KEY(2, 7, KEY_CAPSLOCK), + + KEY(3, 0, KEY_Z), + KEY(3, 1, KEY_KPPLUS), + KEY(3, 2, KEY_B), + KEY(3, 3, KEY_F1), + KEY(3, 4, KEY_F8), + KEY(3, 5, KEY_UNKNOWN), + KEY(3, 6, KEY_O), + KEY(3, 7, KEY_SPACE), + + KEY(4, 0, KEY_W), + KEY(4, 1, KEY_Y), + KEY(4, 2, KEY_U), + KEY(4, 3, KEY_F2), + KEY(4, 4, KEY_VOLUMEUP), + KEY(4, 5, KEY_UNKNOWN), + KEY(4, 6, KEY_L), + KEY(4, 7, KEY_LEFT), + + KEY(5, 0, KEY_S), + KEY(5, 1, KEY_H), + KEY(5, 2, KEY_J), + KEY(5, 3, KEY_F3), + KEY(5, 4, KEY_F9), + KEY(5, 5, KEY_VOLUMEDOWN), + KEY(5, 6, KEY_M), + KEY(5, 7, KEY_RIGHT), + + KEY(6, 0, KEY_Q), + KEY(6, 1, KEY_A), + KEY(6, 2, KEY_N), + KEY(6, 3, KEY_BACK), + KEY(6, 4, KEY_BACKSPACE), + KEY(6, 5, KEY_UNKNOWN), + KEY(6, 6, KEY_P), + KEY(6, 7, KEY_UP), + + KEY(7, 0, KEY_PROG1), + KEY(7, 1, KEY_PROG2), + KEY(7, 2, KEY_PROG3), + KEY(7, 3, KEY_PROG4), + KEY(7, 4, KEY_F4), + KEY(7, 5, KEY_UNKNOWN), + KEY(7, 6, KEY_OK), + KEY(7, 7, KEY_DOWN), +}; + +static struct matrix_keymap_data sdp4430_keymap_data = { + .keymap = sdp4430_keymap, + .keymap_size = ARRAY_SIZE(sdp4430_keymap), +}; + +static struct omap4_keypad_platform_data sdp4430_keypad_data = { + .keymap_data = &sdp4430_keymap_data, + .rows = 8, + .cols = 8, +}; static struct gpio_led sdp4430_gpio_leds[] = { { .name = "omap4:green:debug0", @@ -593,6 +678,10 @@ static void __init omap_4430sdp_init(void) spi_register_board_info(sdp4430_spi_board_info, ARRAY_SIZE(sdp4430_spi_board_info)); } + + status = omap4_keyboard_init(&sdp4430_keypad_data); + if (status) + pr_err("Keypad initialization failed: %d\n", status); } static void __init omap_4430sdp_map_io(void) diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index e0f0ef952bc..8800486f946 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -30,6 +30,7 @@ #include #include #include +#include #include "mux.h" #include "control.h" @@ -141,6 +142,46 @@ static inline void omap_init_camera(void) } #endif +struct omap_device_pm_latency omap_keyboard_latency[] = { + { + .deactivate_func = omap_device_idle_hwmods, + .activate_func = omap_device_enable_hwmods, + .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, + }, +}; + +int __init omap4_keyboard_init(struct omap4_keypad_platform_data + *sdp4430_keypad_data) +{ + struct omap_device *od; + struct omap_hwmod *oh; + struct omap4_keypad_platform_data *keypad_data; + unsigned int id = -1; + char *oh_name = "kbd"; + char *name = "omap4-keypad"; + + oh = omap_hwmod_lookup(oh_name); + if (!oh) { + pr_err("Could not look up %s\n", oh_name); + return -ENODEV; + } + + keypad_data = sdp4430_keypad_data; + + od = omap_device_build(name, id, oh, keypad_data, + sizeof(struct omap4_keypad_platform_data), + omap_keyboard_latency, + ARRAY_SIZE(omap_keyboard_latency), 0); + + if (IS_ERR(od)) { + WARN(1, "Cant build omap_device for %s:%s.\n", + name, oh->name); + return PTR_ERR(od); + } + + return 0; +} + #if defined(CONFIG_OMAP_MBOX_FWK) || defined(CONFIG_OMAP_MBOX_FWK_MODULE) #define MBOX_REG_SIZE 0x120 -- cgit v1.2.3-18-g5258 From 741927f753a41c644840589a382a1d3500f86206 Mon Sep 17 00:00:00 2001 From: Eyal Reizer Date: Thu, 27 Jan 2011 09:49:49 +0000 Subject: omap3evm: add support for the WL12xx WLAN module to the AM/DM3xx Evaluation Module Adds platform initialization for working with the WLAN module attached to the evaluation module. The patch includes MMC2 initialization, SDIO and control pins muxing and platform device registration Signed-off-by: Eyal Reizer Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-omap3evm.c | 78 ++++++++++++++++++++++++++++++++++++ 1 file changed, 78 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index c2a0fca4aa5..ac50bf94944 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -30,6 +30,8 @@ #include #include +#include +#include #include #include @@ -381,6 +383,16 @@ static struct omap2_hsmmc_info mmc[] = { .gpio_cd = -EINVAL, .gpio_wp = 63, }, +#ifdef CONFIG_WL12XX_PLATFORM_DATA + { + .name = "wl1271", + .mmc = 2, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD, + .gpio_wp = -EINVAL, + .gpio_cd = -EINVAL, + .nonremovable = true, + }, +#endif {} /* Terminator */ }; @@ -538,6 +550,50 @@ static struct regulator_init_data omap3_evm_vpll2 = { .consumer_supplies = &omap3_evm_vpll2_supply, }; +#ifdef CONFIG_WL12XX_PLATFORM_DATA + +#define OMAP3EVM_WLAN_PMENA_GPIO (150) +#define OMAP3EVM_WLAN_IRQ_GPIO (149) + +static struct regulator_consumer_supply omap3evm_vmmc2_supply = { + .supply = "vmmc", + .dev_name = "mmci-omap-hs.1", +}; + +/* VMMC2 for driving the WL12xx module */ +static struct regulator_init_data omap3evm_vmmc2 = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &omap3evm_vmmc2_supply, +}; + +static struct fixed_voltage_config omap3evm_vwlan = { + .supply_name = "vwl1271", + .microvolts = 1800000, /* 1.80V */ + .gpio = OMAP3EVM_WLAN_PMENA_GPIO, + .startup_delay = 70000, /* 70ms */ + .enable_high = 1, + .enabled_at_boot = 0, + .init_data = &omap3evm_vmmc2, +}; + +static struct platform_device omap3evm_vwlan_device = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &omap3evm_vwlan, + }, +}; + +struct wl12xx_platform_data omap3evm_wlan_data __initdata = { + .irq = OMAP_GPIO_IRQ(OMAP3EVM_WLAN_IRQ_GPIO), + /* ref clock is 38.4 MHz */ + .board_ref_clock = 2, +}; +#endif + static struct twl4030_platform_data omap3evm_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, @@ -657,6 +713,21 @@ static struct omap_board_mux board_mux[] __initdata = { OMAP_PIN_OFF_WAKEUPENABLE), OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW), +#ifdef CONFIG_WL12XX_PLATFORM_DATA + /* WLAN IRQ - GPIO 149 */ + OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), + + /* WLAN POWER ENABLE - GPIO 150 */ + OMAP3_MUX(UART1_CTS, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), + + /* MMC2 SDIO pin muxes for WL12xx */ + OMAP3_MUX(SDMMC2_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), + OMAP3_MUX(SDMMC2_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), + OMAP3_MUX(SDMMC2_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), + OMAP3_MUX(SDMMC2_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), + OMAP3_MUX(SDMMC2_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), + OMAP3_MUX(SDMMC2_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), +#endif { .reg_offset = OMAP_MUX_TERMINATOR }, }; #endif @@ -714,6 +785,13 @@ static void __init omap3_evm_init(void) ads7846_dev_init(); omap3evm_init_smsc911x(); omap3_evm_display_init(); + +#ifdef CONFIG_WL12XX_PLATFORM_DATA + /* WL12xx WLAN Init */ + if (wl12xx_set_platform_data(&omap3evm_wlan_data)) + pr_err("error setting wl12xx data\n"); + platform_device_register(&omap3evm_vwlan_device); +#endif } MACHINE_START(OMAP3EVM, "OMAP3 EVM") -- cgit v1.2.3-18-g5258 From 14796fca2bd22acc73dd0887248d003b0f441d08 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 18 Jan 2011 20:48:27 -0500 Subject: intel_idle: disable NHM/WSM HW C-state auto-demotion Hardware C-state auto-demotion is a mechanism where the HW overrides the OS C-state request, instead demoting to a shallower state, which is less expensive, but saves less power. Modern Linux should generally get exactly the states it requests. In particular, when a CPU is taken off-line, it must not be demoted, else it can prevent the entire package from reaching deep C-states. https://bugzilla.kernel.org/show_bug.cgi?id=25252 Signed-off-by: Len Brown --- arch/x86/include/asm/msr-index.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h index 4d0dfa0d998..b75eeab2b1e 100644 --- a/arch/x86/include/asm/msr-index.h +++ b/arch/x86/include/asm/msr-index.h @@ -36,6 +36,10 @@ #define MSR_IA32_PERFCTR1 0x000000c2 #define MSR_FSB_FREQ 0x000000cd +#define MSR_NHM_SNB_PKG_CST_CFG_CTL 0x000000e2 +#define NHM_C3_AUTO_DEMOTE (1UL << 25) +#define NHM_C1_AUTO_DEMOTE (1UL << 26) + #define MSR_MTRRcap 0x000000fe #define MSR_IA32_BBL_CR_CTL 0x00000119 -- cgit v1.2.3-18-g5258 From bfb53ccf1c734b1907df7189eef4c08489827951 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Wed, 16 Feb 2011 01:32:48 -0500 Subject: intel_idle: disable Atom/Lincroft HW C-state auto-demotion Just as we had to disable auto-demotion for NHM/WSM, we need to do the same for Atom (Lincroft version). In particular, auto-demotion will prevent Lincroft from entering the S0i3 idle power saving state. https://bugzilla.kernel.org/show_bug.cgi?id=25252 Signed-off-by: Len Brown --- arch/x86/include/asm/msr-index.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h index b75eeab2b1e..43a18c77676 100644 --- a/arch/x86/include/asm/msr-index.h +++ b/arch/x86/include/asm/msr-index.h @@ -39,6 +39,7 @@ #define MSR_NHM_SNB_PKG_CST_CFG_CTL 0x000000e2 #define NHM_C3_AUTO_DEMOTE (1UL << 25) #define NHM_C1_AUTO_DEMOTE (1UL << 26) +#define ATM_LNC_C6_AUTO_DEMOTE (1UL << 25) #define MSR_MTRRcap 0x000000fe #define MSR_IA32_BBL_CR_CTL 0x00000119 -- cgit v1.2.3-18-g5258 From 9bc64b89cd730a09b02c66af730229e0abc9e2bb Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Mon, 24 Jan 2011 19:25:55 +0000 Subject: OMAP3EVM: Reset the smsc911x ethernet controller in board_init With addition of hwmod support to gpio, the ethernet controller goes undetected for OMAP35xEVM. So explicitly assert the reset signal to ethernet controller smsc911x - - GPIO7 (>=RevG version of EVM's) - GPIO64 (<=RevD version of EVM's) Tested this patch on RevG version of EVM with ES3.1 Si. This patch is based on intial version from Charulatha V, reference to original discussion - http://www.mail-archive.com/linux-omap@vger.kernel.org/msg35784.html Signed-off-by: Vaibhav Hiremath Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-omap3evm.c | 39 +++++++++++++++++++++++++++++++++++- 1 file changed, 38 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index ac50bf94944..b9f954e839d 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -60,6 +60,13 @@ #define OMAP3EVM_ETHR_ID_REV 0x50 #define OMAP3EVM_ETHR_GPIO_IRQ 176 #define OMAP3EVM_SMSC911X_CS 5 +/* + * Eth Reset signal + * 64 = Generation 1 (<=RevD) + * 7 = Generation 2 (>=RevE) + */ +#define OMAP3EVM_GEN1_ETHR_GPIO_RST 64 +#define OMAP3EVM_GEN2_ETHR_GPIO_RST 7 static u8 omap3_evm_version; @@ -126,10 +133,15 @@ static struct platform_device omap3evm_smsc911x_device = { static inline void __init omap3evm_init_smsc911x(void) { - int eth_cs; + int eth_cs, eth_rst; struct clk *l3ck; unsigned int rate; + if (get_omap3_evm_rev() == OMAP3EVM_BOARD_GEN_1) + eth_rst = OMAP3EVM_GEN1_ETHR_GPIO_RST; + else + eth_rst = OMAP3EVM_GEN2_ETHR_GPIO_RST; + eth_cs = OMAP3EVM_SMSC911X_CS; l3ck = clk_get(NULL, "l3_ck"); @@ -138,6 +150,27 @@ static inline void __init omap3evm_init_smsc911x(void) else rate = clk_get_rate(l3ck); + /* Configure ethernet controller reset gpio */ + if (cpu_is_omap3430()) { + if (gpio_request(eth_rst, "SMSC911x gpio") < 0) { + pr_err(KERN_ERR "Failed to request %d for smsc911x\n", + eth_rst); + return; + } + + if (gpio_direction_output(eth_rst, 1) < 0) { + pr_err(KERN_ERR "Failed to set direction of %d for" \ + " smsc911x\n", eth_rst); + return; + } + /* reset pulse to ethernet controller*/ + usleep_range(150, 220); + gpio_set_value(eth_rst, 0); + usleep_range(150, 220); + gpio_set_value(eth_rst, 1); + usleep_range(1, 2); + } + if (gpio_request(OMAP3EVM_ETHR_GPIO_IRQ, "SMSC911x irq") < 0) { printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n", OMAP3EVM_ETHR_GPIO_IRQ); @@ -713,6 +746,10 @@ static struct omap_board_mux board_mux[] __initdata = { OMAP_PIN_OFF_WAKEUPENABLE), OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW), + OMAP3_MUX(SYS_BOOT5, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP | + OMAP_PIN_OFF_NONE), + OMAP3_MUX(GPMC_WAIT2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP | + OMAP_PIN_OFF_NONE), #ifdef CONFIG_WL12XX_PLATFORM_DATA /* WLAN IRQ - GPIO 149 */ OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), -- cgit v1.2.3-18-g5258 From f186e9b24f84e771124c6ee47e19dac5de35f987 Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Tue, 25 Jan 2011 17:37:37 +0000 Subject: omap3evm: Change TWL related gpio API's to gpio*_cansleep Since TWL GPIO's can go into sleep, and using normal gpio_get/set_value() API will lead to kernel dump (WARN_ON()). So replacing standard gpio_get/set_value() to gpio_get/set_value_cansleep(). Signed-off-by: Vaibhav Hiremath Reviewed-by: Charulatha V Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-omap3evm.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index b9f954e839d..80c9f8a7d05 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -270,9 +270,9 @@ static int omap3_evm_enable_lcd(struct omap_dss_device *dssdev) gpio_set_value(OMAP3EVM_LCD_PANEL_ENVDD, 0); if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) - gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0); + gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0); else - gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1); + gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1); lcd_enabled = 1; return 0; @@ -283,9 +283,9 @@ static void omap3_evm_disable_lcd(struct omap_dss_device *dssdev) gpio_set_value(OMAP3EVM_LCD_PANEL_ENVDD, 1); if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) - gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1); + gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1); else - gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0); + gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0); lcd_enabled = 0; } @@ -324,7 +324,7 @@ static int omap3_evm_enable_dvi(struct omap_dss_device *dssdev) return -EINVAL; } - gpio_set_value(OMAP3EVM_DVI_PANEL_EN_GPIO, 1); + gpio_set_value_cansleep(OMAP3EVM_DVI_PANEL_EN_GPIO, 1); dvi_enabled = 1; return 0; @@ -332,7 +332,7 @@ static int omap3_evm_enable_dvi(struct omap_dss_device *dssdev) static void omap3_evm_disable_dvi(struct omap_dss_device *dssdev) { - gpio_set_value(OMAP3EVM_DVI_PANEL_EN_GPIO, 0); + gpio_set_value_cansleep(OMAP3EVM_DVI_PANEL_EN_GPIO, 0); dvi_enabled = 0; } -- cgit v1.2.3-18-g5258 From 410491d408ee98a31c6eeff5072ae0c13e0a2324 Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Tue, 25 Jan 2011 17:37:38 +0000 Subject: OMAP3EVM: Add vio regulator supply required for ads7846 TSC driver Add vio regulator supply, needed for ads7846 touchscreen controller driver. Tested on OMAP3 (ES3.1 Si) RevG version of EVM. Signed-off-by: Vaibhav Hiremath Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-omap3evm.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 80c9f8a7d05..bbdf3ad299c 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -583,6 +583,25 @@ static struct regulator_init_data omap3_evm_vpll2 = { .consumer_supplies = &omap3_evm_vpll2_supply, }; +/* ads7846 on SPI */ +static struct regulator_consumer_supply omap3evm_vio_supply = + REGULATOR_SUPPLY("vcc", "spi1.0"); + +/* VIO for ads7846 */ +static struct regulator_init_data omap3evm_vio = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &omap3evm_vio_supply, +}; + #ifdef CONFIG_WL12XX_PLATFORM_DATA #define OMAP3EVM_WLAN_PMENA_GPIO (150) @@ -639,6 +658,7 @@ static struct twl4030_platform_data omap3evm_twldata = { .codec = &omap3evm_codec_data, .vdac = &omap3_evm_vdac, .vpll2 = &omap3_evm_vpll2, + .vio = &omap3evm_vio, }; static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = { -- cgit v1.2.3-18-g5258 From 904c545c22dc4926e73c5c869efed0ca6a778bda Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Tue, 25 Jan 2011 17:37:39 +0000 Subject: AM/DM37x: DSS mux configuration for >Rev-B processor cards To support higher resolution (e.g 720P@60), on OMAP36x (AM/DM37x) DSS data bus has been muxed with sys_boot pins. DSS[18-23] => DSS[0-5] sys_boot[0,1 3-5] => DSS[18-23] EVM revision >=RevB adopt this mux changes, which is going to ship outside. Signed-off-by: Vaibhav Hiremath Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-omap3evm.c | 34 ++++++++++++++++++++++++++++++++-- 1 file changed, 32 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index bbdf3ad299c..36dac55b235 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -760,7 +760,7 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = { }; #ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { +static struct omap_board_mux omap35x_board_mux[] __initdata = { OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW | OMAP_PIN_OFF_WAKEUPENABLE), @@ -787,6 +787,32 @@ static struct omap_board_mux board_mux[] __initdata = { #endif { .reg_offset = OMAP_MUX_TERMINATOR }, }; + +static struct omap_board_mux omap36x_board_mux[] __initdata = { + OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP | + OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW | + OMAP_PIN_OFF_WAKEUPENABLE), + OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP | + OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW), + /* AM/DM37x EVM: DSS data bus muxed with sys_boot */ + OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), + OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), + OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), + OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), + OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), + OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), + OMAP3_MUX(SYS_BOOT0, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), + OMAP3_MUX(SYS_BOOT1, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), + OMAP3_MUX(SYS_BOOT3, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), + OMAP3_MUX(SYS_BOOT4, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), + OMAP3_MUX(SYS_BOOT5, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), + OMAP3_MUX(SYS_BOOT6, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), + + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap35x_board_mux NULL +#define omap36x_board_mux NULL #endif static struct omap_musb_board_data musb_board_data = { @@ -798,7 +824,11 @@ static struct omap_musb_board_data musb_board_data = { static void __init omap3_evm_init(void) { omap3_evm_get_revision(); - omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); + + if (cpu_is_omap3630()) + omap3_mux_init(omap36x_board_mux, OMAP_PACKAGE_CBB); + else + omap3_mux_init(omap35x_board_mux, OMAP_PACKAGE_CBB); omap3_evm_i2c_init(); -- cgit v1.2.3-18-g5258 From 3c95c985fa91ecf6a0e29622bbdd13dcfc5ce9f1 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Thu, 17 Feb 2011 18:39:28 +0100 Subject: tty: add TIOCVHANGUP to allow clean tty shutdown of all ttys This is useful for system management software so that it can kick off things like gettys and everything that's started from a tty, before we reuse it from/for something else or shut it down. Without this ioctl it would have to temporarily become the owner of the tty, then call vhangup() and then give it up again. Cc: Lennart Poettering Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- arch/alpha/include/asm/ioctls.h | 1 + arch/mips/include/asm/ioctls.h | 1 + arch/parisc/include/asm/ioctls.h | 1 + arch/powerpc/include/asm/ioctls.h | 1 + arch/sh/include/asm/ioctls.h | 1 + arch/sparc/include/asm/ioctls.h | 1 + arch/xtensa/include/asm/ioctls.h | 1 + 7 files changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/alpha/include/asm/ioctls.h b/arch/alpha/include/asm/ioctls.h index 034b6cf5d9f..80e1cee90f1 100644 --- a/arch/alpha/include/asm/ioctls.h +++ b/arch/alpha/include/asm/ioctls.h @@ -94,6 +94,7 @@ #define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ #define TIOCGDEV _IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */ #define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ +#define TIOCVHANGUP 0x5437 #define TIOCSERCONFIG 0x5453 #define TIOCSERGWILD 0x5454 diff --git a/arch/mips/include/asm/ioctls.h b/arch/mips/include/asm/ioctls.h index d967b899762..92403c3d600 100644 --- a/arch/mips/include/asm/ioctls.h +++ b/arch/mips/include/asm/ioctls.h @@ -85,6 +85,7 @@ #define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */ #define TIOCGDEV _IOR('T', 0x32, unsigned int) /* Get primary device node of /dev/console */ #define TIOCSIG _IOW('T', 0x36, int) /* Generate signal on Pty slave */ +#define TIOCVHANGUP 0x5437 /* I hope the range from 0x5480 on is free ... */ #define TIOCSCTTY 0x5480 /* become controlling tty */ diff --git a/arch/parisc/include/asm/ioctls.h b/arch/parisc/include/asm/ioctls.h index 6ba80d03623..054ec06f9e2 100644 --- a/arch/parisc/include/asm/ioctls.h +++ b/arch/parisc/include/asm/ioctls.h @@ -54,6 +54,7 @@ #define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ #define TIOCGDEV _IOR('T',0x32, int) /* Get primary device node of /dev/console */ #define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ +#define TIOCVHANGUP 0x5437 #define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ #define FIOCLEX 0x5451 diff --git a/arch/powerpc/include/asm/ioctls.h b/arch/powerpc/include/asm/ioctls.h index c7dc17cf84f..e9b78870aaa 100644 --- a/arch/powerpc/include/asm/ioctls.h +++ b/arch/powerpc/include/asm/ioctls.h @@ -96,6 +96,7 @@ #define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ #define TIOCGDEV _IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */ #define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ +#define TIOCVHANGUP 0x5437 #define TIOCSERCONFIG 0x5453 #define TIOCSERGWILD 0x5454 diff --git a/arch/sh/include/asm/ioctls.h b/arch/sh/include/asm/ioctls.h index 84e85a79263..a6769f352bf 100644 --- a/arch/sh/include/asm/ioctls.h +++ b/arch/sh/include/asm/ioctls.h @@ -87,6 +87,7 @@ #define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ #define TIOCGDEV _IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */ #define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ +#define TIOCVHANGUP _IO('T', 0x37) #define TIOCSERCONFIG _IO('T', 83) /* 0x5453 */ #define TIOCSERGWILD _IOR('T', 84, int) /* 0x5454 */ diff --git a/arch/sparc/include/asm/ioctls.h b/arch/sparc/include/asm/ioctls.h index ed3807b96bb..28d0c8b02cc 100644 --- a/arch/sparc/include/asm/ioctls.h +++ b/arch/sparc/include/asm/ioctls.h @@ -20,6 +20,7 @@ #define TCSETSW2 _IOW('T', 14, struct termios2) #define TCSETSF2 _IOW('T', 15, struct termios2) #define TIOCGDEV _IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */ +#define TIOCVHANGUP _IO('T', 0x37) /* Note that all the ioctls that are not available in Linux have a * double underscore on the front to: a) avoid some programs to diff --git a/arch/xtensa/include/asm/ioctls.h b/arch/xtensa/include/asm/ioctls.h index ccf1800f0b0..fd1d1369a40 100644 --- a/arch/xtensa/include/asm/ioctls.h +++ b/arch/xtensa/include/asm/ioctls.h @@ -100,6 +100,7 @@ #define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ #define TIOCGDEV _IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */ #define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ +#define TIOCVHANGUP _IO('T', 0x37) #define TIOCSERCONFIG _IO('T', 83) #define TIOCSERGWILD _IOR('T', 84, int) -- cgit v1.2.3-18-g5258 From 42fc8cab020c4d848a969b7c0a80b591c35bb263 Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Tue, 25 Jan 2011 17:37:40 +0000 Subject: OMAP3EVM: Made backlight GPIO default state to off If you choose default output to DVI, the LCD backlight used to stay on, since panel->disable function never gets called. So, during init put backlight GPIO to off state and the driver code will decide which output to enable. Signed-off-by: Vaibhav Hiremath Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-omap3evm.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 36dac55b235..4f2574c35dd 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -456,6 +456,8 @@ static struct platform_device leds_gpio = { static int omap3evm_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { + int r; + /* gpio + 0 is "mmc0_cd" (input/IRQ) */ omap_mux_init_gpio(63, OMAP_PIN_INPUT); mmc[0].gpio_cd = gpio + 0; @@ -471,8 +473,12 @@ static int omap3evm_twl_gpio_setup(struct device *dev, */ /* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */ - gpio_request(gpio + TWL4030_GPIO_MAX, "EN_LCD_BKL"); - gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0); + r = gpio_request(gpio + TWL4030_GPIO_MAX, "EN_LCD_BKL"); + if (!r) + r = gpio_direction_output(gpio + TWL4030_GPIO_MAX, + (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) ? 1 : 0); + if (r) + printk(KERN_ERR "failed to get/set lcd_bkl gpio\n"); /* gpio + 7 == DVI Enable */ gpio_request(gpio + 7, "EN_DVI"); -- cgit v1.2.3-18-g5258 From 854c122f54d0074afb9e9a8f2ab7d6258c1f218f Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Tue, 25 Jan 2011 17:37:41 +0000 Subject: OMAP3EVM: Set TSC wakeup option in pad config Set OMAP_PIN_OFF_WAKEUPENABLE to enable the wake-up functionality from touchscreen controller. Signed-off-by: Vaibhav Hiremath Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-omap3evm.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 4f2574c35dd..d4a11571229 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -771,7 +771,8 @@ static struct omap_board_mux omap35x_board_mux[] __initdata = { OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW | OMAP_PIN_OFF_WAKEUPENABLE), OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP | - OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW), + OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW | + OMAP_PIN_OFF_WAKEUPENABLE), OMAP3_MUX(SYS_BOOT5, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_NONE), OMAP3_MUX(GPMC_WAIT2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP | @@ -799,7 +800,8 @@ static struct omap_board_mux omap36x_board_mux[] __initdata = { OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW | OMAP_PIN_OFF_WAKEUPENABLE), OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP | - OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW), + OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW | + OMAP_PIN_OFF_WAKEUPENABLE), /* AM/DM37x EVM: DSS data bus muxed with sys_boot */ OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), -- cgit v1.2.3-18-g5258 From f4117ac9e237b74afdf5e001d5ea26a4d15e9847 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 4 Jan 2011 18:07:14 +0000 Subject: ARM: P2V: separate PHYS_OFFSET from platform definitions This uncouple PHYS_OFFSET from the platform definitions, thereby facilitating run-time computation of the physical memory offset. Acked-by: Nicolas Pitre Acked-by: Viresh Kumar Acked-by: H Hartley Sweeten Acked-by: Magnus Damm Acked-by: Tony Lindgren Acked-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Wan ZongShun Acked-by: Kukjin Kim Acked-by: Eric Miao Acked-by: Jiandong Zheng Signed-off-by: Russell King --- arch/arm/include/asm/memory.h | 2 ++ arch/arm/kernel/tcm.c | 2 +- arch/arm/mach-aaec2000/include/mach/memory.h | 2 +- arch/arm/mach-at91/include/mach/memory.h | 2 +- arch/arm/mach-bcmring/include/mach/hardware.h | 2 +- arch/arm/mach-bcmring/include/mach/memory.h | 2 +- arch/arm/mach-clps711x/include/mach/memory.h | 2 +- arch/arm/mach-cns3xxx/include/mach/memory.h | 2 +- arch/arm/mach-davinci/include/mach/memory.h | 4 ++-- arch/arm/mach-dove/include/mach/memory.h | 2 +- arch/arm/mach-ebsa110/include/mach/memory.h | 2 +- arch/arm/mach-ep93xx/include/mach/memory.h | 10 +++++----- arch/arm/mach-footbridge/include/mach/memory.h | 2 +- arch/arm/mach-gemini/include/mach/memory.h | 4 ++-- arch/arm/mach-h720x/include/mach/memory.h | 2 +- arch/arm/mach-integrator/include/mach/memory.h | 2 +- arch/arm/mach-iop13xx/include/mach/memory.h | 2 +- arch/arm/mach-iop32x/include/mach/memory.h | 2 +- arch/arm/mach-iop33x/include/mach/memory.h | 2 +- arch/arm/mach-ixp2000/include/mach/memory.h | 2 +- arch/arm/mach-ixp23xx/include/mach/memory.h | 2 +- arch/arm/mach-ixp4xx/include/mach/memory.h | 2 +- arch/arm/mach-kirkwood/include/mach/memory.h | 2 +- arch/arm/mach-ks8695/include/mach/memory.h | 2 +- arch/arm/mach-lh7a40x/include/mach/memory.h | 2 +- arch/arm/mach-loki/include/mach/memory.h | 2 +- arch/arm/mach-lpc32xx/include/mach/memory.h | 2 +- arch/arm/mach-mmp/include/mach/memory.h | 2 +- arch/arm/mach-msm/board-msm7x30.c | 2 +- arch/arm/mach-msm/include/mach/memory.h | 10 +++++----- arch/arm/mach-mv78xx0/include/mach/memory.h | 2 +- arch/arm/mach-mx3/mach-kzm_arm11_01.c | 2 +- arch/arm/mach-netx/include/mach/memory.h | 2 +- arch/arm/mach-nomadik/include/mach/memory.h | 2 +- arch/arm/mach-ns9xxx/include/mach/memory.h | 2 +- arch/arm/mach-nuc93x/include/mach/memory.h | 2 +- arch/arm/mach-orion5x/include/mach/memory.h | 2 +- arch/arm/mach-pnx4008/include/mach/memory.h | 2 +- arch/arm/mach-pxa/include/mach/memory.h | 2 +- arch/arm/mach-realview/include/mach/memory.h | 4 ++-- arch/arm/mach-rpc/include/mach/memory.h | 2 +- arch/arm/mach-s3c2400/include/mach/memory.h | 2 +- arch/arm/mach-s3c2410/include/mach/memory.h | 2 +- arch/arm/mach-s3c24a0/include/mach/memory.h | 2 +- arch/arm/mach-s3c64xx/include/mach/memory.h | 2 +- arch/arm/mach-s5p6442/include/mach/memory.h | 2 +- arch/arm/mach-s5p64x0/include/mach/memory.h | 2 +- arch/arm/mach-s5pc100/include/mach/memory.h | 2 +- arch/arm/mach-s5pv210/include/mach/memory.h | 2 +- arch/arm/mach-s5pv310/include/mach/memory.h | 2 +- arch/arm/mach-sa1100/include/mach/memory.h | 2 +- arch/arm/mach-shark/include/mach/memory.h | 2 +- arch/arm/mach-shmobile/include/mach/memory.h | 2 +- arch/arm/mach-tegra/include/mach/memory.h | 2 +- arch/arm/mach-u300/include/mach/memory.h | 6 +++--- arch/arm/mach-u300/u300.c | 2 +- arch/arm/mach-ux500/include/mach/memory.h | 2 +- arch/arm/mach-versatile/include/mach/memory.h | 2 +- arch/arm/mach-vexpress/include/mach/memory.h | 2 +- arch/arm/mach-w90x900/include/mach/memory.h | 2 +- arch/arm/plat-mxc/include/mach/memory.h | 18 +++++++++--------- arch/arm/plat-omap/include/plat/memory.h | 4 ++-- arch/arm/plat-spear/include/plat/memory.h | 2 +- arch/arm/plat-stmp3xxx/include/mach/memory.h | 2 +- arch/arm/plat-tcc/include/mach/memory.h | 2 +- 65 files changed, 88 insertions(+), 86 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index d0ee74b7cf8..2efec578a62 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -24,6 +24,8 @@ */ #define UL(x) _AC(x, UL) +#define PHYS_OFFSET PLAT_PHYS_OFFSET + #ifdef CONFIG_MMU /* diff --git a/arch/arm/kernel/tcm.c b/arch/arm/kernel/tcm.c index 26685c2f7a4..f5cf660eefc 100644 --- a/arch/arm/kernel/tcm.c +++ b/arch/arm/kernel/tcm.c @@ -15,7 +15,7 @@ #include /* memcpy */ #include #include -#include +#include #include "tcm.h" static struct gen_pool *tcm_pool; diff --git a/arch/arm/mach-aaec2000/include/mach/memory.h b/arch/arm/mach-aaec2000/include/mach/memory.h index 4f93c567a35..4a10bf0bd36 100644 --- a/arch/arm/mach-aaec2000/include/mach/memory.h +++ b/arch/arm/mach-aaec2000/include/mach/memory.h @@ -12,6 +12,6 @@ #define __ASM_ARCH_MEMORY_H -#define PHYS_OFFSET UL(0xf0000000) +#define PLAT_PHYS_OFFSET UL(0xf0000000) #endif /* __ASM_ARCH_MEMORY_H */ diff --git a/arch/arm/mach-at91/include/mach/memory.h b/arch/arm/mach-at91/include/mach/memory.h index 14f4ef4b6a9..c2cfe504064 100644 --- a/arch/arm/mach-at91/include/mach/memory.h +++ b/arch/arm/mach-at91/include/mach/memory.h @@ -23,6 +23,6 @@ #include -#define PHYS_OFFSET (AT91_SDRAM_BASE) +#define PLAT_PHYS_OFFSET (AT91_SDRAM_BASE) #endif diff --git a/arch/arm/mach-bcmring/include/mach/hardware.h b/arch/arm/mach-bcmring/include/mach/hardware.h index 447eb340c61..8bf3564fba5 100644 --- a/arch/arm/mach-bcmring/include/mach/hardware.h +++ b/arch/arm/mach-bcmring/include/mach/hardware.h @@ -31,7 +31,7 @@ * *_SIZE is the size of the region * *_BASE is the virtual address */ -#define RAM_START PHYS_OFFSET +#define RAM_START PLAT_PHYS_OFFSET #define RAM_SIZE (CFG_GLOBAL_RAM_SIZE-CFG_GLOBAL_RAM_SIZE_RESERVED) #define RAM_BASE PAGE_OFFSET diff --git a/arch/arm/mach-bcmring/include/mach/memory.h b/arch/arm/mach-bcmring/include/mach/memory.h index 114f942bb4f..15162e4c75f 100644 --- a/arch/arm/mach-bcmring/include/mach/memory.h +++ b/arch/arm/mach-bcmring/include/mach/memory.h @@ -23,7 +23,7 @@ * files. Use virt_to_phys/phys_to_virt/__pa/__va instead. */ -#define PHYS_OFFSET CFG_GLOBAL_RAM_BASE +#define PLAT_PHYS_OFFSET CFG_GLOBAL_RAM_BASE /* * Maximum DMA memory allowed is 14M diff --git a/arch/arm/mach-clps711x/include/mach/memory.h b/arch/arm/mach-clps711x/include/mach/memory.h index f45c8e892cb..3a032a67725 100644 --- a/arch/arm/mach-clps711x/include/mach/memory.h +++ b/arch/arm/mach-clps711x/include/mach/memory.h @@ -23,7 +23,7 @@ /* * Physical DRAM offset. */ -#define PHYS_OFFSET UL(0xc0000000) +#define PLAT_PHYS_OFFSET UL(0xc0000000) #if !defined(CONFIG_ARCH_CDB89712) && !defined (CONFIG_ARCH_AUTCPU12) diff --git a/arch/arm/mach-cns3xxx/include/mach/memory.h b/arch/arm/mach-cns3xxx/include/mach/memory.h index 3b6b769b7a2..dc16c5c5d86 100644 --- a/arch/arm/mach-cns3xxx/include/mach/memory.h +++ b/arch/arm/mach-cns3xxx/include/mach/memory.h @@ -13,7 +13,7 @@ /* * Physical DRAM offset. */ -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #define __phys_to_bus(x) ((x) + PHYS_OFFSET) #define __bus_to_phys(x) ((x) - PHYS_OFFSET) diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h index 22eb97c1c30..78822723f38 100644 --- a/arch/arm/mach-davinci/include/mach/memory.h +++ b/arch/arm/mach-davinci/include/mach/memory.h @@ -26,9 +26,9 @@ #if defined(CONFIG_ARCH_DAVINCI_DA8XX) && defined(CONFIG_ARCH_DAVINCI_DMx) #error Cannot enable DaVinci and DA8XX platforms concurrently #elif defined(CONFIG_ARCH_DAVINCI_DA8XX) -#define PHYS_OFFSET DA8XX_DDR_BASE +#define PLAT_PHYS_OFFSET DA8XX_DDR_BASE #else -#define PHYS_OFFSET DAVINCI_DDR_BASE +#define PLAT_PHYS_OFFSET DAVINCI_DDR_BASE #endif #define DDR2_SDRCR_OFFSET 0xc diff --git a/arch/arm/mach-dove/include/mach/memory.h b/arch/arm/mach-dove/include/mach/memory.h index d6687207494..bbc93fee6c7 100644 --- a/arch/arm/mach-dove/include/mach/memory.h +++ b/arch/arm/mach-dove/include/mach/memory.h @@ -5,6 +5,6 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #endif diff --git a/arch/arm/mach-ebsa110/include/mach/memory.h b/arch/arm/mach-ebsa110/include/mach/memory.h index 0ca66d080c6..8e49066ad85 100644 --- a/arch/arm/mach-ebsa110/include/mach/memory.h +++ b/arch/arm/mach-ebsa110/include/mach/memory.h @@ -19,7 +19,7 @@ /* * Physical DRAM offset. */ -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) /* * Cache flushing area - SRAM diff --git a/arch/arm/mach-ep93xx/include/mach/memory.h b/arch/arm/mach-ep93xx/include/mach/memory.h index 554064e9030..c9400cf0051 100644 --- a/arch/arm/mach-ep93xx/include/mach/memory.h +++ b/arch/arm/mach-ep93xx/include/mach/memory.h @@ -6,15 +6,15 @@ #define __ASM_ARCH_MEMORY_H #if defined(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #elif defined(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) -#define PHYS_OFFSET UL(0xc0000000) +#define PLAT_PHYS_OFFSET UL(0xc0000000) #elif defined(CONFIG_EP93XX_SDCE1_PHYS_OFFSET) -#define PHYS_OFFSET UL(0xd0000000) +#define PLAT_PHYS_OFFSET UL(0xd0000000) #elif defined(CONFIG_EP93XX_SDCE2_PHYS_OFFSET) -#define PHYS_OFFSET UL(0xe0000000) +#define PLAT_PHYS_OFFSET UL(0xe0000000) #elif defined(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET) -#define PHYS_OFFSET UL(0xf0000000) +#define PLAT_PHYS_OFFSET UL(0xf0000000) #else #error "Kconfig bug: No EP93xx PHYS_OFFSET set" #endif diff --git a/arch/arm/mach-footbridge/include/mach/memory.h b/arch/arm/mach-footbridge/include/mach/memory.h index 8d64f457408..5c6df377f96 100644 --- a/arch/arm/mach-footbridge/include/mach/memory.h +++ b/arch/arm/mach-footbridge/include/mach/memory.h @@ -62,7 +62,7 @@ extern unsigned long __bus_to_pfn(unsigned long); /* * Physical DRAM offset. */ -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #define FLUSH_BASE_PHYS 0x50000000 diff --git a/arch/arm/mach-gemini/include/mach/memory.h b/arch/arm/mach-gemini/include/mach/memory.h index 2d14d5bf1f9..a50915f764d 100644 --- a/arch/arm/mach-gemini/include/mach/memory.h +++ b/arch/arm/mach-gemini/include/mach/memory.h @@ -11,9 +11,9 @@ #define __MACH_MEMORY_H #ifdef CONFIG_GEMINI_MEM_SWAP -# define PHYS_OFFSET UL(0x00000000) +# define PLAT_PHYS_OFFSET UL(0x00000000) #else -# define PHYS_OFFSET UL(0x10000000) +# define PLAT_PHYS_OFFSET UL(0x10000000) #endif #endif /* __MACH_MEMORY_H */ diff --git a/arch/arm/mach-h720x/include/mach/memory.h b/arch/arm/mach-h720x/include/mach/memory.h index ef4c1e26f18..9d368765146 100644 --- a/arch/arm/mach-h720x/include/mach/memory.h +++ b/arch/arm/mach-h720x/include/mach/memory.h @@ -7,7 +7,7 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#define PHYS_OFFSET UL(0x40000000) +#define PLAT_PHYS_OFFSET UL(0x40000000) /* * This is the maximum DMA address that can be DMAd to. * There should not be more than (0xd0000000 - 0xc0000000) diff --git a/arch/arm/mach-integrator/include/mach/memory.h b/arch/arm/mach-integrator/include/mach/memory.h index 991f24d2c11..334d5e27188 100644 --- a/arch/arm/mach-integrator/include/mach/memory.h +++ b/arch/arm/mach-integrator/include/mach/memory.h @@ -23,7 +23,7 @@ /* * Physical DRAM offset. */ -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #define BUS_OFFSET UL(0x80000000) #define __virt_to_bus(x) ((x) - PAGE_OFFSET + BUS_OFFSET) diff --git a/arch/arm/mach-iop13xx/include/mach/memory.h b/arch/arm/mach-iop13xx/include/mach/memory.h index 3ad45531886..1afa99ef97f 100644 --- a/arch/arm/mach-iop13xx/include/mach/memory.h +++ b/arch/arm/mach-iop13xx/include/mach/memory.h @@ -6,7 +6,7 @@ /* * Physical DRAM offset. */ -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #ifndef __ASSEMBLY__ diff --git a/arch/arm/mach-iop32x/include/mach/memory.h b/arch/arm/mach-iop32x/include/mach/memory.h index c30f6450ad5..169cc239f76 100644 --- a/arch/arm/mach-iop32x/include/mach/memory.h +++ b/arch/arm/mach-iop32x/include/mach/memory.h @@ -8,6 +8,6 @@ /* * Physical DRAM offset. */ -#define PHYS_OFFSET UL(0xa0000000) +#define PLAT_PHYS_OFFSET UL(0xa0000000) #endif diff --git a/arch/arm/mach-iop33x/include/mach/memory.h b/arch/arm/mach-iop33x/include/mach/memory.h index a30a96aa6d2..8e1daf7006b 100644 --- a/arch/arm/mach-iop33x/include/mach/memory.h +++ b/arch/arm/mach-iop33x/include/mach/memory.h @@ -8,6 +8,6 @@ /* * Physical DRAM offset. */ -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #endif diff --git a/arch/arm/mach-ixp2000/include/mach/memory.h b/arch/arm/mach-ixp2000/include/mach/memory.h index 98e3471be15..5f0c4fd4076 100644 --- a/arch/arm/mach-ixp2000/include/mach/memory.h +++ b/arch/arm/mach-ixp2000/include/mach/memory.h @@ -13,7 +13,7 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #include diff --git a/arch/arm/mach-ixp23xx/include/mach/memory.h b/arch/arm/mach-ixp23xx/include/mach/memory.h index 6ef65d813f1..6cf0704e946 100644 --- a/arch/arm/mach-ixp23xx/include/mach/memory.h +++ b/arch/arm/mach-ixp23xx/include/mach/memory.h @@ -17,7 +17,7 @@ /* * Physical DRAM offset. */ -#define PHYS_OFFSET (0x00000000) +#define PLAT_PHYS_OFFSET (0x00000000) #define IXP23XX_PCI_SDRAM_OFFSET (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0) diff --git a/arch/arm/mach-ixp4xx/include/mach/memory.h b/arch/arm/mach-ixp4xx/include/mach/memory.h index 0136eaa2922..6d388c9d0e2 100644 --- a/arch/arm/mach-ixp4xx/include/mach/memory.h +++ b/arch/arm/mach-ixp4xx/include/mach/memory.h @@ -12,7 +12,7 @@ /* * Physical DRAM offset. */ -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #if !defined(__ASSEMBLY__) && defined(CONFIG_PCI) diff --git a/arch/arm/mach-kirkwood/include/mach/memory.h b/arch/arm/mach-kirkwood/include/mach/memory.h index 45431e13146..4600b44e3ad 100644 --- a/arch/arm/mach-kirkwood/include/mach/memory.h +++ b/arch/arm/mach-kirkwood/include/mach/memory.h @@ -5,6 +5,6 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #endif diff --git a/arch/arm/mach-ks8695/include/mach/memory.h b/arch/arm/mach-ks8695/include/mach/memory.h index bace9a681ad..f7e1b9bce34 100644 --- a/arch/arm/mach-ks8695/include/mach/memory.h +++ b/arch/arm/mach-ks8695/include/mach/memory.h @@ -18,7 +18,7 @@ /* * Physical SRAM offset. */ -#define PHYS_OFFSET KS8695_SDRAM_PA +#define PLAT_PHYS_OFFSET KS8695_SDRAM_PA #ifndef __ASSEMBLY__ diff --git a/arch/arm/mach-lh7a40x/include/mach/memory.h b/arch/arm/mach-lh7a40x/include/mach/memory.h index edb8f5faf5d..f77bde80fe4 100644 --- a/arch/arm/mach-lh7a40x/include/mach/memory.h +++ b/arch/arm/mach-lh7a40x/include/mach/memory.h @@ -17,7 +17,7 @@ /* * Physical DRAM offset. */ -#define PHYS_OFFSET UL(0xc0000000) +#define PLAT_PHYS_OFFSET UL(0xc0000000) /* * Sparsemem version of the above diff --git a/arch/arm/mach-loki/include/mach/memory.h b/arch/arm/mach-loki/include/mach/memory.h index 2ed7e6e732c..66366657a87 100644 --- a/arch/arm/mach-loki/include/mach/memory.h +++ b/arch/arm/mach-loki/include/mach/memory.h @@ -5,6 +5,6 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #endif diff --git a/arch/arm/mach-lpc32xx/include/mach/memory.h b/arch/arm/mach-lpc32xx/include/mach/memory.h index 044e1acecbe..a647dd624af 100644 --- a/arch/arm/mach-lpc32xx/include/mach/memory.h +++ b/arch/arm/mach-lpc32xx/include/mach/memory.h @@ -22,6 +22,6 @@ /* * Physical DRAM offset of bank 0 */ -#define PHYS_OFFSET UL(0x80000000) +#define PLAT_PHYS_OFFSET UL(0x80000000) #endif diff --git a/arch/arm/mach-mmp/include/mach/memory.h b/arch/arm/mach-mmp/include/mach/memory.h index bdb21d70714..d68b50a2d6a 100644 --- a/arch/arm/mach-mmp/include/mach/memory.h +++ b/arch/arm/mach-mmp/include/mach/memory.h @@ -9,6 +9,6 @@ #ifndef __ASM_MACH_MEMORY_H #define __ASM_MACH_MEMORY_H -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #endif /* __ASM_MACH_MEMORY_H */ diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c index 6f3b9735e97..decbf80b429 100644 --- a/arch/arm/mach-msm/board-msm7x30.c +++ b/arch/arm/mach-msm/board-msm7x30.c @@ -26,11 +26,11 @@ #include #include +#include #include #include #include -#include #include #include diff --git a/arch/arm/mach-msm/include/mach/memory.h b/arch/arm/mach-msm/include/mach/memory.h index 070e17d237f..176875df241 100644 --- a/arch/arm/mach-msm/include/mach/memory.h +++ b/arch/arm/mach-msm/include/mach/memory.h @@ -18,15 +18,15 @@ /* physical offset of RAM */ #if defined(CONFIG_ARCH_QSD8X50) && defined(CONFIG_MSM_SOC_REV_A) -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #elif defined(CONFIG_ARCH_QSD8X50) -#define PHYS_OFFSET UL(0x20000000) +#define PLAT_PHYS_OFFSET UL(0x20000000) #elif defined(CONFIG_ARCH_MSM7X30) -#define PHYS_OFFSET UL(0x00200000) +#define PLAT_PHYS_OFFSET UL(0x00200000) #elif defined(CONFIG_ARCH_MSM8X60) -#define PHYS_OFFSET UL(0x40200000) +#define PLAT_PHYS_OFFSET UL(0x40200000) #else -#define PHYS_OFFSET UL(0x10000000) +#define PLAT_PHYS_OFFSET UL(0x10000000) #endif #endif diff --git a/arch/arm/mach-mv78xx0/include/mach/memory.h b/arch/arm/mach-mv78xx0/include/mach/memory.h index e663042d307..a648c51f2e4 100644 --- a/arch/arm/mach-mv78xx0/include/mach/memory.h +++ b/arch/arm/mach-mv78xx0/include/mach/memory.h @@ -5,6 +5,6 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #endif diff --git a/arch/arm/mach-mx3/mach-kzm_arm11_01.c b/arch/arm/mach-mx3/mach-kzm_arm11_01.c index a5f3eb24e4d..df1a6ce8e3e 100644 --- a/arch/arm/mach-mx3/mach-kzm_arm11_01.c +++ b/arch/arm/mach-mx3/mach-kzm_arm11_01.c @@ -27,6 +27,7 @@ #include #include +#include #include #include #include @@ -36,7 +37,6 @@ #include #include #include -#include #include "devices-imx31.h" #include "devices.h" diff --git a/arch/arm/mach-netx/include/mach/memory.h b/arch/arm/mach-netx/include/mach/memory.h index 9a363f297f9..59561496c36 100644 --- a/arch/arm/mach-netx/include/mach/memory.h +++ b/arch/arm/mach-netx/include/mach/memory.h @@ -20,7 +20,7 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#define PHYS_OFFSET UL(0x80000000) +#define PLAT_PHYS_OFFSET UL(0x80000000) #endif diff --git a/arch/arm/mach-nomadik/include/mach/memory.h b/arch/arm/mach-nomadik/include/mach/memory.h index 1e5689d98ec..d3325211ba6 100644 --- a/arch/arm/mach-nomadik/include/mach/memory.h +++ b/arch/arm/mach-nomadik/include/mach/memory.h @@ -23,6 +23,6 @@ /* * Physical DRAM offset. */ -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #endif diff --git a/arch/arm/mach-ns9xxx/include/mach/memory.h b/arch/arm/mach-ns9xxx/include/mach/memory.h index 6107193adbf..5c65aee6e7a 100644 --- a/arch/arm/mach-ns9xxx/include/mach/memory.h +++ b/arch/arm/mach-ns9xxx/include/mach/memory.h @@ -19,6 +19,6 @@ #define NS9XXX_CS2STAT_LENGTH UL(0x1000) #define NS9XXX_CS3STAT_LENGTH UL(0x1000) -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #endif diff --git a/arch/arm/mach-nuc93x/include/mach/memory.h b/arch/arm/mach-nuc93x/include/mach/memory.h index 323ab0db3f7..ef9864b002a 100644 --- a/arch/arm/mach-nuc93x/include/mach/memory.h +++ b/arch/arm/mach-nuc93x/include/mach/memory.h @@ -16,6 +16,6 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #endif diff --git a/arch/arm/mach-orion5x/include/mach/memory.h b/arch/arm/mach-orion5x/include/mach/memory.h index 52a2955d0f8..6769917882f 100644 --- a/arch/arm/mach-orion5x/include/mach/memory.h +++ b/arch/arm/mach-orion5x/include/mach/memory.h @@ -7,6 +7,6 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #endif diff --git a/arch/arm/mach-pnx4008/include/mach/memory.h b/arch/arm/mach-pnx4008/include/mach/memory.h index 0e877008105..1275db61cee 100644 --- a/arch/arm/mach-pnx4008/include/mach/memory.h +++ b/arch/arm/mach-pnx4008/include/mach/memory.h @@ -16,6 +16,6 @@ /* * Physical DRAM offset. */ -#define PHYS_OFFSET UL(0x80000000) +#define PLAT_PHYS_OFFSET UL(0x80000000) #endif diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h index 92361a66b22..7f68724dcc2 100644 --- a/arch/arm/mach-pxa/include/mach/memory.h +++ b/arch/arm/mach-pxa/include/mach/memory.h @@ -15,7 +15,7 @@ /* * Physical DRAM offset. */ -#define PHYS_OFFSET UL(0xa0000000) +#define PLAT_PHYS_OFFSET UL(0xa0000000) #if !defined(__ASSEMBLY__) && defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI) void cmx2xx_pci_adjust_zones(unsigned long *size, unsigned long *holes); diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h index 5dafc157b27..e05fc2c4c08 100644 --- a/arch/arm/mach-realview/include/mach/memory.h +++ b/arch/arm/mach-realview/include/mach/memory.h @@ -24,9 +24,9 @@ * Physical DRAM offset. */ #ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET -#define PHYS_OFFSET UL(0x70000000) +#define PLAT_PHYS_OFFSET UL(0x70000000) #else -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #endif #if !defined(__ASSEMBLY__) && defined(CONFIG_ZONE_DMA) diff --git a/arch/arm/mach-rpc/include/mach/memory.h b/arch/arm/mach-rpc/include/mach/memory.h index 78191bf2519..18a221093bf 100644 --- a/arch/arm/mach-rpc/include/mach/memory.h +++ b/arch/arm/mach-rpc/include/mach/memory.h @@ -21,7 +21,7 @@ /* * Physical DRAM offset. */ -#define PHYS_OFFSET UL(0x10000000) +#define PLAT_PHYS_OFFSET UL(0x10000000) /* * Cache flushing area - ROM diff --git a/arch/arm/mach-s3c2400/include/mach/memory.h b/arch/arm/mach-s3c2400/include/mach/memory.h index cf5901ffd38..3f33670dd01 100644 --- a/arch/arm/mach-s3c2400/include/mach/memory.h +++ b/arch/arm/mach-s3c2400/include/mach/memory.h @@ -15,6 +15,6 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#define PHYS_OFFSET UL(0x0C000000) +#define PLAT_PHYS_OFFSET UL(0x0C000000) #endif diff --git a/arch/arm/mach-s3c2410/include/mach/memory.h b/arch/arm/mach-s3c2410/include/mach/memory.h index 6f1e5871ae4..f92b97b89c0 100644 --- a/arch/arm/mach-s3c2410/include/mach/memory.h +++ b/arch/arm/mach-s3c2410/include/mach/memory.h @@ -11,6 +11,6 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#define PHYS_OFFSET UL(0x30000000) +#define PLAT_PHYS_OFFSET UL(0x30000000) #endif diff --git a/arch/arm/mach-s3c24a0/include/mach/memory.h b/arch/arm/mach-s3c24a0/include/mach/memory.h index 7d74fd5c8d6..7d208a71b17 100644 --- a/arch/arm/mach-s3c24a0/include/mach/memory.h +++ b/arch/arm/mach-s3c24a0/include/mach/memory.h @@ -11,7 +11,7 @@ #ifndef __ASM_ARCH_24A0_MEMORY_H #define __ASM_ARCH_24A0_MEMORY_H __FILE__ -#define PHYS_OFFSET UL(0x10000000) +#define PLAT_PHYS_OFFSET UL(0x10000000) #define __virt_to_bus(x) __virt_to_phys(x) #define __bus_to_virt(x) __phys_to_virt(x) diff --git a/arch/arm/mach-s3c64xx/include/mach/memory.h b/arch/arm/mach-s3c64xx/include/mach/memory.h index 42cc54e2ee3..4760cdae1eb 100644 --- a/arch/arm/mach-s3c64xx/include/mach/memory.h +++ b/arch/arm/mach-s3c64xx/include/mach/memory.h @@ -13,7 +13,7 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#define PHYS_OFFSET UL(0x50000000) +#define PLAT_PHYS_OFFSET UL(0x50000000) #define CONSISTENT_DMA_SIZE SZ_8M diff --git a/arch/arm/mach-s5p6442/include/mach/memory.h b/arch/arm/mach-s5p6442/include/mach/memory.h index 9ddd877ba2e..cfe259dded3 100644 --- a/arch/arm/mach-s5p6442/include/mach/memory.h +++ b/arch/arm/mach-s5p6442/include/mach/memory.h @@ -13,7 +13,7 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#define PHYS_OFFSET UL(0x20000000) +#define PLAT_PHYS_OFFSET UL(0x20000000) #define CONSISTENT_DMA_SIZE SZ_8M #endif /* __ASM_ARCH_MEMORY_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/memory.h b/arch/arm/mach-s5p64x0/include/mach/memory.h index 1b036b0a24c..365a6eb4b88 100644 --- a/arch/arm/mach-s5p64x0/include/mach/memory.h +++ b/arch/arm/mach-s5p64x0/include/mach/memory.h @@ -13,7 +13,7 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H __FILE__ -#define PHYS_OFFSET UL(0x20000000) +#define PLAT_PHYS_OFFSET UL(0x20000000) #define CONSISTENT_DMA_SIZE SZ_8M #endif /* __ASM_ARCH_MEMORY_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/memory.h b/arch/arm/mach-s5pc100/include/mach/memory.h index 4b60d18179f..bda4e79fd5f 100644 --- a/arch/arm/mach-s5pc100/include/mach/memory.h +++ b/arch/arm/mach-s5pc100/include/mach/memory.h @@ -13,6 +13,6 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#define PHYS_OFFSET UL(0x20000000) +#define PLAT_PHYS_OFFSET UL(0x20000000) #endif diff --git a/arch/arm/mach-s5pv210/include/mach/memory.h b/arch/arm/mach-s5pv210/include/mach/memory.h index d503e0c4ce4..7b5fcf0da0c 100644 --- a/arch/arm/mach-s5pv210/include/mach/memory.h +++ b/arch/arm/mach-s5pv210/include/mach/memory.h @@ -13,7 +13,7 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#define PHYS_OFFSET UL(0x20000000) +#define PLAT_PHYS_OFFSET UL(0x20000000) #define CONSISTENT_DMA_SIZE (SZ_8M + SZ_4M + SZ_2M) /* diff --git a/arch/arm/mach-s5pv310/include/mach/memory.h b/arch/arm/mach-s5pv310/include/mach/memory.h index 1dffb482324..470b01bf861 100644 --- a/arch/arm/mach-s5pv310/include/mach/memory.h +++ b/arch/arm/mach-s5pv310/include/mach/memory.h @@ -13,7 +13,7 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H __FILE__ -#define PHYS_OFFSET UL(0x40000000) +#define PLAT_PHYS_OFFSET UL(0x40000000) /* Maximum of 256MiB in one bank */ #define MAX_PHYSMEM_BITS 32 diff --git a/arch/arm/mach-sa1100/include/mach/memory.h b/arch/arm/mach-sa1100/include/mach/memory.h index 128a1dfa96b..a44da6a2916 100644 --- a/arch/arm/mach-sa1100/include/mach/memory.h +++ b/arch/arm/mach-sa1100/include/mach/memory.h @@ -12,7 +12,7 @@ /* * Physical DRAM offset is 0xc0000000 on the SA1100 */ -#define PHYS_OFFSET UL(0xc0000000) +#define PLAT_PHYS_OFFSET UL(0xc0000000) #ifndef __ASSEMBLY__ diff --git a/arch/arm/mach-shark/include/mach/memory.h b/arch/arm/mach-shark/include/mach/memory.h index d9c4812f1c3..9afb1700000 100644 --- a/arch/arm/mach-shark/include/mach/memory.h +++ b/arch/arm/mach-shark/include/mach/memory.h @@ -15,7 +15,7 @@ /* * Physical DRAM offset. */ -#define PHYS_OFFSET UL(0x08000000) +#define PLAT_PHYS_OFFSET UL(0x08000000) #ifndef __ASSEMBLY__ diff --git a/arch/arm/mach-shmobile/include/mach/memory.h b/arch/arm/mach-shmobile/include/mach/memory.h index 377584e57e0..ad00c3c258f 100644 --- a/arch/arm/mach-shmobile/include/mach/memory.h +++ b/arch/arm/mach-shmobile/include/mach/memory.h @@ -1,7 +1,7 @@ #ifndef __ASM_MACH_MEMORY_H #define __ASM_MACH_MEMORY_H -#define PHYS_OFFSET UL(CONFIG_MEMORY_START) +#define PLAT_PHYS_OFFSET UL(CONFIG_MEMORY_START) #define MEM_SIZE UL(CONFIG_MEMORY_SIZE) /* DMA memory at 0xf6000000 - 0xffdfffff */ diff --git a/arch/arm/mach-tegra/include/mach/memory.h b/arch/arm/mach-tegra/include/mach/memory.h index 6151bab62af..537db3aa81a 100644 --- a/arch/arm/mach-tegra/include/mach/memory.h +++ b/arch/arm/mach-tegra/include/mach/memory.h @@ -22,7 +22,7 @@ #define __MACH_TEGRA_MEMORY_H /* physical offset of RAM */ -#define PHYS_OFFSET UL(0) +#define PLAT_PHYS_OFFSET UL(0) #endif diff --git a/arch/arm/mach-u300/include/mach/memory.h b/arch/arm/mach-u300/include/mach/memory.h index bf134bcc129..888e2e351ee 100644 --- a/arch/arm/mach-u300/include/mach/memory.h +++ b/arch/arm/mach-u300/include/mach/memory.h @@ -15,17 +15,17 @@ #ifdef CONFIG_MACH_U300_DUAL_RAM -#define PHYS_OFFSET UL(0x48000000) +#define PLAT_PHYS_OFFSET UL(0x48000000) #define BOOT_PARAMS_OFFSET (PHYS_OFFSET + 0x100) #else #ifdef CONFIG_MACH_U300_2MB_ALIGNMENT_FIX -#define PHYS_OFFSET (0x28000000 + \ +#define PLAT_PHYS_OFFSET (0x28000000 + \ (CONFIG_MACH_U300_ACCESS_MEM_SIZE - \ (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024) #else -#define PHYS_OFFSET (0x28000000 + \ +#define PLAT_PHYS_OFFSET (0x28000000 + \ (CONFIG_MACH_U300_ACCESS_MEM_SIZE + \ (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024) #endif diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c index 07c35a84642..48b3b7f3996 100644 --- a/arch/arm/mach-u300/u300.c +++ b/arch/arm/mach-u300/u300.c @@ -19,9 +19,9 @@ #include #include #include -#include #include #include +#include static void __init u300_reserve(void) { diff --git a/arch/arm/mach-ux500/include/mach/memory.h b/arch/arm/mach-ux500/include/mach/memory.h index 510571a59e2..2ef697a6700 100644 --- a/arch/arm/mach-ux500/include/mach/memory.h +++ b/arch/arm/mach-ux500/include/mach/memory.h @@ -12,7 +12,7 @@ /* * Physical DRAM offset. */ -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #define BUS_OFFSET UL(0x00000000) #endif diff --git a/arch/arm/mach-versatile/include/mach/memory.h b/arch/arm/mach-versatile/include/mach/memory.h index 79aeab86b90..dacc9d8e4e6 100644 --- a/arch/arm/mach-versatile/include/mach/memory.h +++ b/arch/arm/mach-versatile/include/mach/memory.h @@ -23,6 +23,6 @@ /* * Physical DRAM offset. */ -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #endif diff --git a/arch/arm/mach-vexpress/include/mach/memory.h b/arch/arm/mach-vexpress/include/mach/memory.h index be28232ae63..5b7fcd439d8 100644 --- a/arch/arm/mach-vexpress/include/mach/memory.h +++ b/arch/arm/mach-vexpress/include/mach/memory.h @@ -20,6 +20,6 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#define PHYS_OFFSET UL(0x60000000) +#define PLAT_PHYS_OFFSET UL(0x60000000) #endif diff --git a/arch/arm/mach-w90x900/include/mach/memory.h b/arch/arm/mach-w90x900/include/mach/memory.h index 971b80702c2..f02905ba774 100644 --- a/arch/arm/mach-w90x900/include/mach/memory.h +++ b/arch/arm/mach-w90x900/include/mach/memory.h @@ -18,6 +18,6 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #endif diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h index 83861408133..5d51cbb9889 100644 --- a/arch/arm/plat-mxc/include/mach/memory.h +++ b/arch/arm/plat-mxc/include/mach/memory.h @@ -23,23 +23,23 @@ #if !defined(CONFIG_RUNTIME_PHYS_OFFSET) # if defined CONFIG_ARCH_MX1 -# define PHYS_OFFSET MX1_PHYS_OFFSET +# define PLAT_PHYS_OFFSET MX1_PHYS_OFFSET # elif defined CONFIG_MACH_MX21 -# define PHYS_OFFSET MX21_PHYS_OFFSET +# define PLAT_PHYS_OFFSET MX21_PHYS_OFFSET # elif defined CONFIG_ARCH_MX25 -# define PHYS_OFFSET MX25_PHYS_OFFSET +# define PLAT_PHYS_OFFSET MX25_PHYS_OFFSET # elif defined CONFIG_MACH_MX27 -# define PHYS_OFFSET MX27_PHYS_OFFSET +# define PLAT_PHYS_OFFSET MX27_PHYS_OFFSET # elif defined CONFIG_ARCH_MX3 -# define PHYS_OFFSET MX3x_PHYS_OFFSET +# define PLAT_PHYS_OFFSET MX3x_PHYS_OFFSET # elif defined CONFIG_ARCH_MXC91231 -# define PHYS_OFFSET MXC91231_PHYS_OFFSET +# define PLAT_PHYS_OFFSET MXC91231_PHYS_OFFSET # elif defined CONFIG_ARCH_MX50 -# define PHYS_OFFSET MX50_PHYS_OFFSET +# define PLAT_PHYS_OFFSET MX50_PHYS_OFFSET # elif defined CONFIG_ARCH_MX51 -# define PHYS_OFFSET MX51_PHYS_OFFSET +# define PLAT_PHYS_OFFSET MX51_PHYS_OFFSET # elif defined CONFIG_ARCH_MX53 -# define PHYS_OFFSET MX53_PHYS_OFFSET +# define PLAT_PHYS_OFFSET MX53_PHYS_OFFSET # endif #endif diff --git a/arch/arm/plat-omap/include/plat/memory.h b/arch/arm/plat-omap/include/plat/memory.h index f8d922fb558..e6720aa2d55 100644 --- a/arch/arm/plat-omap/include/plat/memory.h +++ b/arch/arm/plat-omap/include/plat/memory.h @@ -37,9 +37,9 @@ * Physical DRAM offset. */ #if defined(CONFIG_ARCH_OMAP1) -#define PHYS_OFFSET UL(0x10000000) +#define PLAT_PHYS_OFFSET UL(0x10000000) #else -#define PHYS_OFFSET UL(0x80000000) +#define PLAT_PHYS_OFFSET UL(0x80000000) #endif /* diff --git a/arch/arm/plat-spear/include/plat/memory.h b/arch/arm/plat-spear/include/plat/memory.h index 27a4aba7734..7e3599e1104 100644 --- a/arch/arm/plat-spear/include/plat/memory.h +++ b/arch/arm/plat-spear/include/plat/memory.h @@ -15,6 +15,6 @@ #define __PLAT_MEMORY_H /* Physical DRAM offset */ -#define PHYS_OFFSET UL(0x00000000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #endif /* __PLAT_MEMORY_H */ diff --git a/arch/arm/plat-stmp3xxx/include/mach/memory.h b/arch/arm/plat-stmp3xxx/include/mach/memory.h index 7b875a07a1a..61fa54882e1 100644 --- a/arch/arm/plat-stmp3xxx/include/mach/memory.h +++ b/arch/arm/plat-stmp3xxx/include/mach/memory.h @@ -17,6 +17,6 @@ /* * Physical DRAM offset. */ -#define PHYS_OFFSET UL(0x40000000) +#define PLAT_PHYS_OFFSET UL(0x40000000) #endif diff --git a/arch/arm/plat-tcc/include/mach/memory.h b/arch/arm/plat-tcc/include/mach/memory.h index cd91ba8a670..28a6e0cd13b 100644 --- a/arch/arm/plat-tcc/include/mach/memory.h +++ b/arch/arm/plat-tcc/include/mach/memory.h @@ -13,6 +13,6 @@ /* * Physical DRAM offset. */ -#define PHYS_OFFSET UL(0x20000000) +#define PLAT_PHYS_OFFSET UL(0x20000000) #endif -- cgit v1.2.3-18-g5258 From b75c178afaa975896e894bb2b6951dc4cd43c977 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 4 Jan 2011 19:03:16 +0000 Subject: ARM: P2V: avoid initializers and assembly using PHYS_OFFSET As PHYS_OFFSET will be becoming a variable, we can't have it used in initializers nor assembly code. Replace those in generic code with a run-time initialization. Replace those in platform code using the individual platform specific PLAT_PHYS_OFFSET. Acked-by: Nicolas Pitre Acked-by: Tony Lindgren Acked-by: Kukjin Kim Acked-by: David Brown Acked-by: Eric Miao Signed-off-by: Russell King --- arch/arm/kernel/setup.c | 4 +++- arch/arm/mach-msm/board-msm7x27.c | 8 ++++---- arch/arm/mach-msm/board-msm7x30.c | 6 +++--- arch/arm/mach-msm/board-qsd8x50.c | 4 ++-- arch/arm/mach-msm/board-sapphire.c | 2 +- arch/arm/mach-pxa/balloon3.c | 2 +- arch/arm/mach-realview/realview_eb.c | 2 +- arch/arm/mach-realview/realview_pb1176.c | 2 +- arch/arm/mach-realview/realview_pb11mp.c | 2 +- arch/arm/mach-realview/realview_pba8.c | 2 +- arch/arm/mach-realview/realview_pbx.c | 2 +- arch/arm/mach-s5pv210/sleep.S | 2 +- arch/arm/mach-tcc8k/board-tcc8000-sdk.c | 2 +- arch/arm/mach-vexpress/ct-ca9x4.c | 2 +- arch/arm/plat-omap/include/plat/serial.h | 2 +- 15 files changed, 23 insertions(+), 21 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 78678b07901..056bf1878f8 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -740,7 +740,7 @@ static struct init_tags { { tag_size(tag_core), ATAG_CORE }, { 1, PAGE_SIZE, 0xff }, { tag_size(tag_mem32), ATAG_MEM }, - { MEM_SIZE, PHYS_OFFSET }, + { MEM_SIZE }, { 0, ATAG_NONE } }; @@ -839,6 +839,8 @@ void __init setup_arch(char **cmdline_p) struct machine_desc *mdesc; char *from = default_command_line; + init_tags.mem.start = PHYS_OFFSET; + unwind_init(); setup_processor(); diff --git a/arch/arm/mach-msm/board-msm7x27.c b/arch/arm/mach-msm/board-msm7x27.c index e7a76eff57d..08fcd40a8cb 100644 --- a/arch/arm/mach-msm/board-msm7x27.c +++ b/arch/arm/mach-msm/board-msm7x27.c @@ -132,7 +132,7 @@ static void __init msm7x2x_map_io(void) MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF") #ifdef CONFIG_MSM_DEBUG_UART #endif - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = PLAT_PHYS_OFFSET + 0x100, .map_io = msm7x2x_map_io, .init_irq = msm7x2x_init_irq, .init_machine = msm7x2x_init, @@ -142,7 +142,7 @@ MACHINE_END MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA") #ifdef CONFIG_MSM_DEBUG_UART #endif - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = PLAT_PHYS_OFFSET + 0x100, .map_io = msm7x2x_map_io, .init_irq = msm7x2x_init_irq, .init_machine = msm7x2x_init, @@ -152,7 +152,7 @@ MACHINE_END MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF") #ifdef CONFIG_MSM_DEBUG_UART #endif - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = PLAT_PHYS_OFFSET + 0x100, .map_io = msm7x2x_map_io, .init_irq = msm7x2x_init_irq, .init_machine = msm7x2x_init, @@ -162,7 +162,7 @@ MACHINE_END MACHINE_START(MSM7X25_FFA, "QCT MSM7x25 FFA") #ifdef CONFIG_MSM_DEBUG_UART #endif - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = PLAT_PHYS_OFFSET + 0x100, .map_io = msm7x2x_map_io, .init_irq = msm7x2x_init_irq, .init_machine = msm7x2x_init, diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c index decbf80b429..25db8fd71a7 100644 --- a/arch/arm/mach-msm/board-msm7x30.c +++ b/arch/arm/mach-msm/board-msm7x30.c @@ -85,7 +85,7 @@ static void __init msm7x30_map_io(void) MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF") #ifdef CONFIG_MSM_DEBUG_UART #endif - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = PLAT_PHYS_OFFSET + 0x100, .map_io = msm7x30_map_io, .init_irq = msm7x30_init_irq, .init_machine = msm7x30_init, @@ -95,7 +95,7 @@ MACHINE_END MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA") #ifdef CONFIG_MSM_DEBUG_UART #endif - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = PLAT_PHYS_OFFSET + 0x100, .map_io = msm7x30_map_io, .init_irq = msm7x30_init_irq, .init_machine = msm7x30_init, @@ -105,7 +105,7 @@ MACHINE_END MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID") #ifdef CONFIG_MSM_DEBUG_UART #endif - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = PLAT_PHYS_OFFSET + 0x100, .map_io = msm7x30_map_io, .init_irq = msm7x30_init_irq, .init_machine = msm7x30_init, diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c index 6dde8185205..15c2bbd2ef8 100644 --- a/arch/arm/mach-msm/board-qsd8x50.c +++ b/arch/arm/mach-msm/board-qsd8x50.c @@ -118,7 +118,7 @@ static void __init qsd8x50_init(void) MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF") #ifdef CONFIG_MSM_DEBUG_UART #endif - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = PLAT_PHYS_OFFSET + 0x100, .map_io = qsd8x50_map_io, .init_irq = qsd8x50_init_irq, .init_machine = qsd8x50_init, @@ -128,7 +128,7 @@ MACHINE_END MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5") #ifdef CONFIG_MSM_DEBUG_UART #endif - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = PLAT_PHYS_OFFSET + 0x100, .map_io = qsd8x50_map_io, .init_irq = qsd8x50_init_irq, .init_machine = qsd8x50_init, diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c index 8919ffb1719..83604f526f0 100644 --- a/arch/arm/mach-msm/board-sapphire.c +++ b/arch/arm/mach-msm/board-sapphire.c @@ -107,7 +107,7 @@ MACHINE_START(SAPPHIRE, "sapphire") /* Maintainer: Brian Swetland */ #ifdef CONFIG_MSM_DEBUG_UART #endif - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = PLAT_PHYS_OFFSET + 0x100, .fixup = sapphire_fixup, .map_io = sapphire_map_io, .init_irq = sapphire_init_irq, diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index a134a1413e0..e194d928cda 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -829,5 +829,5 @@ MACHINE_START(BALLOON3, "Balloon3") .init_irq = balloon3_init_irq, .timer = &pxa_timer, .init_machine = balloon3_init, - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = PLAT_PHYS_OFFSET + 0x100, MACHINE_END diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 6ef5c5e528b..8ede983b861 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -484,7 +484,7 @@ static void __init realview_eb_init(void) MACHINE_START(REALVIEW_EB, "ARM-RealView EB") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .boot_params = PHYS_OFFSET + 0x00000100, + .boot_params = PLAT_PHYS_OFFSET + 0x00000100, .fixup = realview_fixup, .map_io = realview_eb_map_io, .init_irq = gic_init_irq, diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index cbdc97a5685..9f26369555c 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -379,7 +379,7 @@ static void __init realview_pb1176_init(void) MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .boot_params = PHYS_OFFSET + 0x00000100, + .boot_params = PLAT_PHYS_OFFSET + 0x00000100, .fixup = realview_pb1176_fixup, .map_io = realview_pb1176_map_io, .init_irq = gic_init_irq, diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 8e8ab7d29a6..dea06b2da3a 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -381,7 +381,7 @@ static void __init realview_pb11mp_init(void) MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .boot_params = PHYS_OFFSET + 0x00000100, + .boot_params = PLAT_PHYS_OFFSET + 0x00000100, .fixup = realview_fixup, .map_io = realview_pb11mp_map_io, .init_irq = gic_init_irq, diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index 841118e3e11..7d0f1734a21 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -331,7 +331,7 @@ static void __init realview_pba8_init(void) MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .boot_params = PHYS_OFFSET + 0x00000100, + .boot_params = PLAT_PHYS_OFFSET + 0x00000100, .fixup = realview_fixup, .map_io = realview_pba8_map_io, .init_irq = gic_init_irq, diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index 02b755b009d..b89e28f8853 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -414,7 +414,7 @@ static void __init realview_pbx_init(void) MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .boot_params = PHYS_OFFSET + 0x00000100, + .boot_params = PLAT_PHYS_OFFSET + 0x00000100, .fixup = realview_pbx_fixup, .map_io = realview_pbx_map_io, .init_irq = gic_init_irq, diff --git a/arch/arm/mach-s5pv210/sleep.S b/arch/arm/mach-s5pv210/sleep.S index d4d222b716b..27376223ea9 100644 --- a/arch/arm/mach-s5pv210/sleep.S +++ b/arch/arm/mach-s5pv210/sleep.S @@ -65,7 +65,7 @@ resume_with_mmu: /* * After MMU is turned on, restore the previous MMU table. */ - ldr r9 , =(PAGE_OFFSET - PHYS_OFFSET) + ldr r9 , =(PAGE_OFFSET - PLAT_PHYS_OFFSET) add r4, r4, r9 str r12, [r4] diff --git a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c b/arch/arm/mach-tcc8k/board-tcc8000-sdk.c index 7991415e666..fb6426ddeb7 100644 --- a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c +++ b/arch/arm/mach-tcc8k/board-tcc8000-sdk.c @@ -54,7 +54,7 @@ static void __init tcc8k_map_io(void) } MACHINE_START(TCC8000_SDK, "Telechips TCC8000-SDK Demo Board") - .boot_params = PHYS_OFFSET + 0x00000100, + .boot_params = PLAT_PHYS_OFFSET + 0x00000100, .map_io = tcc8k_map_io, .init_irq = tcc8k_init_irq, .init_machine = tcc8k_init, diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index e628402b754..e9bccc5230c 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -243,7 +243,7 @@ static void __init ct_ca9x4_init(void) } MACHINE_START(VEXPRESS, "ARM-Versatile Express CA9x4") - .boot_params = PHYS_OFFSET + 0x00000100, + .boot_params = PLAT_PHYS_OFFSET + 0x00000100, .map_io = ct_ca9x4_map_io, .init_irq = ct_ca9x4_init_irq, #if 0 diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h index cec5d56db2e..8ff605c83ac 100644 --- a/arch/arm/plat-omap/include/plat/serial.h +++ b/arch/arm/plat-omap/include/plat/serial.h @@ -27,7 +27,7 @@ * 2. We assume printascii is called at least once before paging_init, * and addruart has a chance to read OMAP_UART_INFO */ -#define OMAP_UART_INFO (PHYS_OFFSET + 0x3ffc) +#define OMAP_UART_INFO (PLAT_PHYS_OFFSET + 0x3ffc) /* OMAP1 serial ports */ #define OMAP1_UART1_BASE 0xfffb0000 -- cgit v1.2.3-18-g5258 From 72a20e22f49e2dad3180c23980a9df1c63faab0a Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 4 Jan 2011 19:04:00 +0000 Subject: ARM: P2V: eliminate head.S use of PHYS_OFFSET for !XIP_KERNEL head.S makes use of PHYS_OFFSET. When it becomes a variable, the assembler won't understand this. Compute PHYS_OFFSET by the following method. This code is linked at its virtual address, but run at before the MMU is enabled, so at his physical address. 1: .long . .long PAGE_OFFSET adr r0, 1b @ r0 = physical ',' ldmia r0, {r1, r2} @ r1 = virtual '.', r2 = PAGE_OFFSET sub r1, r0, r1 @ r1 = physical-virtual add r2, r2, r1 @ r2 = PAGE_OFFSET + physical-virtual @ := PHYS_OFFSET. Switch XIP users of PHYS_OFFSET to use PLAT_PHYS_OFFSET - we can't use this method for XIP kernels as the code doesn't execute in RAM. Tested-by: Tony Lindgren Reviewed-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/kernel/head.S | 44 ++++++++++++++++++++++---------------------- 1 file changed, 22 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 8a154b940fe..03a588b6e15 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -26,14 +26,6 @@ #include #endif -#if (PHYS_OFFSET & 0x001fffff) -#error "PHYS_OFFSET must be at an even 2MiB boundary!" -#endif - -#define KERNEL_RAM_VADDR (PAGE_OFFSET + TEXT_OFFSET) -#define KERNEL_RAM_PADDR (PHYS_OFFSET + TEXT_OFFSET) - - /* * swapper_pg_dir is the virtual address of the initial page table. * We place the page tables 16K below KERNEL_RAM_VADDR. Therefore, we must @@ -41,6 +33,7 @@ * the least significant 16 bits to be 0x8000, but we could probably * relax this restriction to KERNEL_RAM_VADDR >= PAGE_OFFSET + 0x4000. */ +#define KERNEL_RAM_VADDR (PAGE_OFFSET + TEXT_OFFSET) #if (KERNEL_RAM_VADDR & 0xffff) != 0x8000 #error KERNEL_RAM_VADDR must start at 0xXXXX8000 #endif @@ -48,8 +41,8 @@ .globl swapper_pg_dir .equ swapper_pg_dir, KERNEL_RAM_VADDR - 0x4000 - .macro pgtbl, rd - ldr \rd, =(KERNEL_RAM_PADDR - 0x4000) + .macro pgtbl, rd, phys + add \rd, \phys, #TEXT_OFFSET - 0x4000 .endm #ifdef CONFIG_XIP_KERNEL @@ -88,9 +81,18 @@ ENTRY(stext) THUMB( it eq ) @ force fixup-able long branch encoding beq __error_p @ yes, error 'p' +#ifndef CONFIG_XIP_KERNEL + adr r3, 2f + ldmia r3, {r4, r8} + sub r4, r3, r4 @ (PHYS_OFFSET - PAGE_OFFSET) + add r8, r8, r4 @ PHYS_OFFSET +#else + ldr r8, =PLAT_PHYS_OFFSET +#endif + /* * r1 = machine no, r2 = atags, - * r9 = cpuid, r10 = procinfo + * r8 = phys_offset, r9 = cpuid, r10 = procinfo */ bl __vet_atags #ifdef CONFIG_SMP_ON_UP @@ -114,21 +116,24 @@ ENTRY(stext) 1: b __enable_mmu ENDPROC(stext) .ltorg +#ifndef CONFIG_XIP_KERNEL +2: .long . + .long PAGE_OFFSET +#endif /* * Setup the initial page tables. We only setup the barest * amount which are required to get the kernel running, which * generally means mapping in the kernel code. * - * r9 = cpuid - * r10 = procinfo + * r8 = phys_offset, r9 = cpuid, r10 = procinfo * * Returns: * r0, r3, r5-r7 corrupted * r4 = physical page table address */ __create_page_tables: - pgtbl r4 @ page table address + pgtbl r4, r8 @ page table address /* * Clear the 16K level 1 swapper page table @@ -184,10 +189,8 @@ __create_page_tables: /* * Map some ram to cover our .data and .bss areas. */ - orr r3, r7, #(KERNEL_RAM_PADDR & 0xff000000) - .if (KERNEL_RAM_PADDR & 0x00f00000) - orr r3, r3, #(KERNEL_RAM_PADDR & 0x00f00000) - .endif + add r3, r8, #TEXT_OFFSET + orr r3, r3, r7 add r0, r4, #(KERNEL_RAM_VADDR & 0xff000000) >> 18 str r3, [r0, #(KERNEL_RAM_VADDR & 0x00f00000) >> 18]! ldr r6, =(_end - 1) @@ -203,10 +206,7 @@ __create_page_tables: * Then map first 1MB of ram in case it contains our boot params. */ add r0, r4, #PAGE_OFFSET >> 18 - orr r6, r7, #(PHYS_OFFSET & 0xff000000) - .if (PHYS_OFFSET & 0x00f00000) - orr r6, r6, #(PHYS_OFFSET & 0x00f00000) - .endif + orr r6, r7, r8 str r6, [r0] #ifdef CONFIG_DEBUG_LL -- cgit v1.2.3-18-g5258 From 5b7de4547b388d3949620e21d072e35b6f2638fa Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 4 Feb 2011 21:03:24 +0100 Subject: ARM: 6651/1: omap: Fix DEBUG_LL code for p2v changes These are needed for CONFIG_ARM_PATCH_PHYS_VIRT to work. Signed-off-by: Tony Lindgren Signed-off-by: Russell King --- arch/arm/mach-omap1/include/mach/debug-macro.S | 9 ++++++--- arch/arm/mach-omap2/include/mach/debug-macro.S | 13 ++++++++----- 2 files changed, 14 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S index 6a0fa046236..62856044eb6 100644 --- a/arch/arm/mach-omap1/include/mach/debug-macro.S +++ b/arch/arm/mach-omap1/include/mach/debug-macro.S @@ -17,6 +17,9 @@ #include +#define omap_uart_v2p(x) ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET) +#define omap_uart_p2v(x) ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET) + .pushsection .data omap_uart_phys: .word 0x0 omap_uart_virt: .word 0x0 @@ -33,7 +36,7 @@ omap_uart_virt: .word 0x0 /* Use omap_uart_phys/virt if already configured */ 9: mrc p15, 0, \rp, c1, c0 tst \rp, #1 @ MMU enabled? - ldreq \rp, =__virt_to_phys(omap_uart_phys) @ MMU not enabled + ldreq \rp, =omap_uart_v2p(omap_uart_phys) @ MMU disabled ldrne \rp, =omap_uart_phys @ MMU enabled add \rv, \rp, #4 @ omap_uart_virt ldr \rp, [\rp, #0] @@ -46,7 +49,7 @@ omap_uart_virt: .word 0x0 mrc p15, 0, \rp, c1, c0 tst \rp, #1 @ MMU enabled? ldreq \rp, =OMAP_UART_INFO @ MMU not enabled - ldrne \rp, =__phys_to_virt(OMAP_UART_INFO) @ MMU enabled + ldrne \rp, =omap_uart_p2v(OMAP_UART_INFO) @ MMU enabled ldr \rp, [\rp, #0] /* Select the UART to use based on the UART1 scratchpad value */ @@ -73,7 +76,7 @@ omap_uart_virt: .word 0x0 98: add \rp, \rp, #0xff000000 @ phys base mrc p15, 0, \rv, c1, c0 tst \rv, #1 @ MMU enabled? - ldreq \rv, =__virt_to_phys(omap_uart_phys) @ MMU not enabled + ldreq \rv, =omap_uart_v2p(omap_uart_phys) @ MMU disabled ldrne \rv, =omap_uart_phys @ MMU enabled str \rp, [\rv, #0] sub \rp, \rp, #0xff000000 @ phys base diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S index 6a4d4136002..6049f465ec8 100644 --- a/arch/arm/mach-omap2/include/mach/debug-macro.S +++ b/arch/arm/mach-omap2/include/mach/debug-macro.S @@ -19,6 +19,9 @@ #define UART_OFFSET(addr) ((addr) & 0x00ffffff) +#define omap_uart_v2p(x) ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET) +#define omap_uart_p2v(x) ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET) + .pushsection .data omap_uart_phys: .word 0 omap_uart_virt: .word 0 @@ -36,7 +39,7 @@ omap_uart_lsr: .word 0 /* Use omap_uart_phys/virt if already configured */ 10: mrc p15, 0, \rp, c1, c0 tst \rp, #1 @ MMU enabled? - ldreq \rp, =__virt_to_phys(omap_uart_phys) @ MMU not enabled + ldreq \rp, =omap_uart_v2p(omap_uart_phys) @ MMU disabled ldrne \rp, =omap_uart_phys @ MMU enabled add \rv, \rp, #4 @ omap_uart_virt ldr \rp, [\rp, #0] @@ -49,7 +52,7 @@ omap_uart_lsr: .word 0 mrc p15, 0, \rp, c1, c0 tst \rp, #1 @ MMU enabled? ldreq \rp, =OMAP_UART_INFO @ MMU not enabled - ldrne \rp, =__phys_to_virt(OMAP_UART_INFO) @ MMU enabled + ldrne \rp, =omap_uart_p2v(OMAP_UART_INFO) @ MMU enabled ldr \rp, [\rp, #0] /* Select the UART to use based on the UART1 scratchpad value */ @@ -94,7 +97,7 @@ omap_uart_lsr: .word 0 95: ldr \rp, =ZOOM_UART_BASE mrc p15, 0, \rv, c1, c0 tst \rv, #1 @ MMU enabled? - ldreq \rv, =__virt_to_phys(omap_uart_phys) @ MMU not enabled + ldreq \rv, =omap_uart_v2p(omap_uart_phys) @ MMU disabled ldrne \rv, =omap_uart_phys @ MMU enabled str \rp, [\rv, #0] ldr \rp, =ZOOM_UART_VIRT @@ -109,7 +112,7 @@ omap_uart_lsr: .word 0 98: add \rp, \rp, #0x48000000 @ phys base mrc p15, 0, \rv, c1, c0 tst \rv, #1 @ MMU enabled? - ldreq \rv, =__virt_to_phys(omap_uart_phys) @ MMU not enabled + ldreq \rv, =omap_uart_v2p(omap_uart_phys) @ MMU disabled ldrne \rv, =omap_uart_phys @ MMU enabled str \rp, [\rv, #0] sub \rp, \rp, #0x48000000 @ phys base @@ -131,7 +134,7 @@ omap_uart_lsr: .word 0 .macro busyuart,rd,rx 1001: mrc p15, 0, \rd, c1, c0 tst \rd, #1 @ MMU enabled? - ldreq \rd, =__virt_to_phys(omap_uart_lsr) @ MMU not enabled + ldreq \rd, =omap_uart_v2p(omap_uart_lsr) @ MMU disabled ldrne \rd, =omap_uart_lsr @ MMU enabled ldr \rd, [\rd, #0] ldrb \rd, [\rx, \rd] -- cgit v1.2.3-18-g5258 From dc21af99fadcfa0ae65b52fd0895f85824f0c288 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 4 Jan 2011 19:09:43 +0000 Subject: ARM: P2V: introduce phys_to_virt/virt_to_phys runtime patching This idea came from Nicolas, Eric Miao produced an initial version, which was then rewritten into this. Patch the physical to virtual translations at runtime. As we modify the code, this makes it incompatible with XIP kernels, but allows us to achieve this with minimal loss of performance. As many translations are of the form: physical = virtual + (PHYS_OFFSET - PAGE_OFFSET) virtual = physical - (PHYS_OFFSET - PAGE_OFFSET) we generate an 'add' instruction for __virt_to_phys(), and a 'sub' instruction for __phys_to_virt(). We calculate at run time (PHYS_OFFSET - PAGE_OFFSET) by comparing the address prior to MMU initialization with where it should be once the MMU has been initialized, and place this constant into the above add/sub instructions. Once we have (PHYS_OFFSET - PAGE_OFFSET), we can calculate the real PHYS_OFFSET as PAGE_OFFSET is a build-time constant, and save this for the C-mode PHYS_OFFSET variable definition to use. At present, we are unable to support Realview with Sparsemem enabled as this uses a complex mapping function, and MSM as this requires a constant which will not fit in our math instruction. Add a module version magic string for this feature to prevent incompatible modules being loaded. Tested-by: Tony Lindgren Reviewed-by: Nicolas Pitre Tested-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/Kconfig | 13 +++++++++ arch/arm/include/asm/memory.h | 55 ++++++++++++++++++++++++++-------- arch/arm/include/asm/module.h | 15 ++++++++-- arch/arm/kernel/armksyms.c | 4 +++ arch/arm/kernel/head.S | 68 +++++++++++++++++++++++++++++++++++++++++++ arch/arm/kernel/module.c | 23 ++++++++++++++- arch/arm/kernel/vmlinux.lds.S | 4 +++ 7 files changed, 167 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5cff165b7eb..4147f76e798 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -191,6 +191,19 @@ config VECTORS_BASE help The base address of exception vectors. +config ARM_PATCH_PHYS_VIRT + bool "Patch physical to virtual translations at runtime (EXPERIMENTAL)" + depends on EXPERIMENTAL + depends on !XIP_KERNEL && !THUMB2_KERNEL && MMU + depends on !ARCH_MSM + depends on !ARCH_REALVIEW || !SPARSEMEM + help + Patch phys-to-virt translation functions at runtime according to + the position of the kernel in system memory. + + This can only be used with non-XIP, non-Thumb2, MMU kernels where + the base of physical memory is at a 16MB boundary. + source "init/Kconfig" source "kernel/Kconfig.freezer" diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index 2efec578a62..7197879e1cb 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -24,8 +24,6 @@ */ #define UL(x) _AC(x, UL) -#define PHYS_OFFSET PLAT_PHYS_OFFSET - #ifdef CONFIG_MMU /* @@ -134,16 +132,6 @@ #define DTCM_OFFSET UL(0xfffe8000) #endif -/* - * Physical vs virtual RAM address space conversion. These are - * private definitions which should NOT be used outside memory.h - * files. Use virt_to_phys/phys_to_virt/__pa/__va instead. - */ -#ifndef __virt_to_phys -#define __virt_to_phys(x) ((x) - PAGE_OFFSET + PHYS_OFFSET) -#define __phys_to_virt(x) ((x) - PHYS_OFFSET + PAGE_OFFSET) -#endif - /* * Convert a physical address to a Page Frame Number and back */ @@ -158,6 +146,49 @@ #ifndef __ASSEMBLY__ +/* + * Physical vs virtual RAM address space conversion. These are + * private definitions which should NOT be used outside memory.h + * files. Use virt_to_phys/phys_to_virt/__pa/__va instead. + */ +#ifndef __virt_to_phys +#ifdef CONFIG_ARM_PATCH_PHYS_VIRT + +extern unsigned long __pv_phys_offset; +#define PHYS_OFFSET __pv_phys_offset + +#define __pv_stub(from,to,instr) \ + __asm__("@ __pv_stub\n" \ + "1: " instr " %0, %1, %2\n" \ + " .pushsection .pv_table,\"a\"\n" \ + " .long 1b\n" \ + " .popsection\n" \ + : "=r" (to) \ + : "r" (from), "I" (0x81000000)) + +static inline unsigned long __virt_to_phys(unsigned long x) +{ + unsigned long t; + __pv_stub(x, t, "add"); + return t; +} + +static inline unsigned long __phys_to_virt(unsigned long x) +{ + unsigned long t; + __pv_stub(x, t, "sub"); + return t; +} +#else +#define __virt_to_phys(x) ((x) - PAGE_OFFSET + PHYS_OFFSET) +#define __phys_to_virt(x) ((x) - PHYS_OFFSET + PAGE_OFFSET) +#endif +#endif + +#ifndef PHYS_OFFSET +#define PHYS_OFFSET PLAT_PHYS_OFFSET +#endif + /* * The DMA mask corresponding to the maximum bus address allocatable * using GFP_DMA. The default here places no restriction on DMA diff --git a/arch/arm/include/asm/module.h b/arch/arm/include/asm/module.h index 12c8e680cbf..d072c21332e 100644 --- a/arch/arm/include/asm/module.h +++ b/arch/arm/include/asm/module.h @@ -25,8 +25,19 @@ struct mod_arch_specific { }; /* - * Include the ARM architecture version. + * Add the ARM architecture version to the version magic string */ -#define MODULE_ARCH_VERMAGIC "ARMv" __stringify(__LINUX_ARM_ARCH__) " " +#define MODULE_ARCH_VERMAGIC_ARMVSN "ARMv" __stringify(__LINUX_ARM_ARCH__) " " + +/* Add __virt_to_phys patching state as well */ +#ifdef CONFIG_ARM_PATCH_PHYS_VIRT +#define MODULE_ARCH_VERMAGIC_P2V "p2v8 " +#else +#define MODULE_ARCH_VERMAGIC_P2V "" +#endif + +#define MODULE_ARCH_VERMAGIC \ + MODULE_ARCH_VERMAGIC_ARMVSN \ + MODULE_ARCH_VERMAGIC_P2V #endif /* _ASM_ARM_MODULE_H */ diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index e5e1e538767..9615423c37d 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -170,3 +170,7 @@ EXPORT_SYMBOL(mcount); #endif EXPORT_SYMBOL(__gnu_mcount_nc); #endif + +#ifdef CONFIG_ARM_PATCH_PHYS_VIRT +EXPORT_SYMBOL(__pv_phys_offset); +#endif diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 03a588b6e15..1db8ead2e33 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -97,6 +97,9 @@ ENTRY(stext) bl __vet_atags #ifdef CONFIG_SMP_ON_UP bl __fixup_smp +#endif +#ifdef CONFIG_ARM_PATCH_PHYS_VIRT + bl __fixup_pv_table #endif bl __create_page_tables @@ -438,4 +441,69 @@ smp_on_up: #endif +#ifdef CONFIG_ARM_PATCH_PHYS_VIRT + +/* __fixup_pv_table - patch the stub instructions with the delta between + * PHYS_OFFSET and PAGE_OFFSET, which is assumed to be 16MiB aligned and + * can be expressed by an immediate shifter operand. The stub instruction + * has a form of '(add|sub) rd, rn, #imm'. + */ + __HEAD +__fixup_pv_table: + adr r0, 1f + ldmia r0, {r3-r5, r7} + sub r3, r0, r3 @ PHYS_OFFSET - PAGE_OFFSET + add r4, r4, r3 @ adjust table start address + add r5, r5, r3 @ adjust table end address + str r8, [r7, r3]! @ save computed PHYS_OFFSET to __pv_phys_offset + mov r6, r3, lsr #24 @ constant for add/sub instructions + teq r3, r6, lsl #24 @ must be 16MiB aligned + bne __error + str r6, [r7, #4] @ save to __pv_offset + b __fixup_a_pv_table +ENDPROC(__fixup_pv_table) + + .align +1: .long . + .long __pv_table_begin + .long __pv_table_end +2: .long __pv_phys_offset + + .text +__fixup_a_pv_table: + b 3f +2: ldr ip, [r7, r3] + bic ip, ip, #0x000000ff + orr ip, ip, r6 + str ip, [r7, r3] +3: cmp r4, r5 + ldrcc r7, [r4], #4 @ use branch for delay slot + bcc 2b + mov pc, lr +ENDPROC(__fixup_a_pv_table) + +ENTRY(fixup_pv_table) + stmfd sp!, {r4 - r7, lr} + ldr r2, 2f @ get address of __pv_phys_offset + mov r3, #0 @ no offset + mov r4, r0 @ r0 = table start + add r5, r0, r1 @ r1 = table size + ldr r6, [r2, #4] @ get __pv_offset + bl __fixup_a_pv_table + ldmfd sp!, {r4 - r7, pc} +ENDPROC(fixup_pv_table) + + .align +2: .long __pv_phys_offset + + .data + .globl __pv_phys_offset + .type __pv_phys_offset, %object +__pv_phys_offset: + .long 0 + .size __pv_phys_offset, . - __pv_phys_offset +__pv_offset: + .long 0 +#endif + #include "head-common.S" diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index 2cfe8161b47..c5679f6d9f6 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -268,12 +268,28 @@ struct mod_unwind_map { const Elf_Shdr *txt_sec; }; +static const Elf_Shdr *find_mod_section(const Elf32_Ehdr *hdr, + const Elf_Shdr *sechdrs, const char *name) +{ + const Elf_Shdr *s, *se; + const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; + + for (s = sechdrs, se = sechdrs + hdr->e_shnum; s < se; s++) + if (strcmp(name, secstrs + s->sh_name) == 0) + return s; + + return NULL; +} + +extern void fixup_pv_table(const void *, unsigned long); + int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs, struct module *mod) { + const Elf_Shdr *s = NULL; #ifdef CONFIG_ARM_UNWIND const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; - const Elf_Shdr *s, *sechdrs_end = sechdrs + hdr->e_shnum; + const Elf_Shdr *sechdrs_end = sechdrs + hdr->e_shnum; struct mod_unwind_map maps[ARM_SEC_MAX]; int i; @@ -314,6 +330,11 @@ int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs, maps[i].unw_sec->sh_size, maps[i].txt_sec->sh_addr, maps[i].txt_sec->sh_size); +#endif +#ifdef CONFIG_ARM_PATCH_PHYS_VIRT + s = find_mod_section(hdr, sechdrs, ".pv_table"); + if (s) + fixup_pv_table((void *)s->sh_addr, s->sh_size); #endif return 0; } diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 86b66f3f203..45b5651777e 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -57,6 +57,10 @@ SECTIONS __smpalt_end = .; #endif + __pv_table_begin = .; + *(.pv_table) + __pv_table_end = .; + INIT_SETUP(16) INIT_CALLS -- cgit v1.2.3-18-g5258 From cada3c0841e1deaec4c0f92654610b028dc683ff Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 4 Jan 2011 19:39:29 +0000 Subject: ARM: P2V: extend to 16-bit translation offsets MSM's memory is aligned to 2MB, which is more than we can do with our existing method as we're limited to the upper 8 bits. Extend this by using two instructions to 16 bits, automatically selected when MSM is enabled. Acked-by: Tony Lindgren Reviewed-by: Nicolas Pitre Tested-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/Kconfig | 5 ++++- arch/arm/include/asm/memory.h | 21 +++++++++++++++++---- arch/arm/include/asm/module.h | 4 ++++ arch/arm/kernel/head.S | 15 ++++++++++++++- 4 files changed, 39 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 4147f76e798..b357c29e7df 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -195,7 +195,6 @@ config ARM_PATCH_PHYS_VIRT bool "Patch physical to virtual translations at runtime (EXPERIMENTAL)" depends on EXPERIMENTAL depends on !XIP_KERNEL && !THUMB2_KERNEL && MMU - depends on !ARCH_MSM depends on !ARCH_REALVIEW || !SPARSEMEM help Patch phys-to-virt translation functions at runtime according to @@ -204,6 +203,10 @@ config ARM_PATCH_PHYS_VIRT This can only be used with non-XIP, non-Thumb2, MMU kernels where the base of physical memory is at a 16MB boundary. +config ARM_PATCH_PHYS_VIRT_16BIT + def_bool y + depends on ARM_PATCH_PHYS_VIRT && ARCH_MSM + source "init/Kconfig" source "kernel/Kconfig.freezer" diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index 7197879e1cb..2398b3fc026 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -154,29 +154,42 @@ #ifndef __virt_to_phys #ifdef CONFIG_ARM_PATCH_PHYS_VIRT +/* + * Constants used to force the right instruction encodings and shifts + * so that all we need to do is modify the 8-bit constant field. + */ +#define __PV_BITS_31_24 0x81000000 +#define __PV_BITS_23_16 0x00810000 + extern unsigned long __pv_phys_offset; #define PHYS_OFFSET __pv_phys_offset -#define __pv_stub(from,to,instr) \ +#define __pv_stub(from,to,instr,type) \ __asm__("@ __pv_stub\n" \ "1: " instr " %0, %1, %2\n" \ " .pushsection .pv_table,\"a\"\n" \ " .long 1b\n" \ " .popsection\n" \ : "=r" (to) \ - : "r" (from), "I" (0x81000000)) + : "r" (from), "I" (type)) static inline unsigned long __virt_to_phys(unsigned long x) { unsigned long t; - __pv_stub(x, t, "add"); + __pv_stub(x, t, "add", __PV_BITS_31_24); +#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT + __pv_stub(t, t, "add", __PV_BITS_23_16); +#endif return t; } static inline unsigned long __phys_to_virt(unsigned long x) { unsigned long t; - __pv_stub(x, t, "sub"); + __pv_stub(x, t, "sub", __PV_BITS_31_24); +#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT + __pv_stub(t, t, "sub", __PV_BITS_23_16); +#endif return t; } #else diff --git a/arch/arm/include/asm/module.h b/arch/arm/include/asm/module.h index d072c21332e..a2b775b81cf 100644 --- a/arch/arm/include/asm/module.h +++ b/arch/arm/include/asm/module.h @@ -31,7 +31,11 @@ struct mod_arch_specific { /* Add __virt_to_phys patching state as well */ #ifdef CONFIG_ARM_PATCH_PHYS_VIRT +#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT +#define MODULE_ARCH_VERMAGIC_P2V "p2v16 " +#else #define MODULE_ARCH_VERMAGIC_P2V "p2v8 " +#endif #else #define MODULE_ARCH_VERMAGIC_P2V "" #endif diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 1db8ead2e33..a94dd99d54c 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -456,8 +456,13 @@ __fixup_pv_table: add r4, r4, r3 @ adjust table start address add r5, r5, r3 @ adjust table end address str r8, [r7, r3]! @ save computed PHYS_OFFSET to __pv_phys_offset +#ifndef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT mov r6, r3, lsr #24 @ constant for add/sub instructions teq r3, r6, lsl #24 @ must be 16MiB aligned +#else + mov r6, r3, lsr #16 @ constant for add/sub instructions + teq r3, r6, lsl #16 @ must be 64kiB aligned +#endif bne __error str r6, [r7, #4] @ save to __pv_offset b __fixup_a_pv_table @@ -471,10 +476,18 @@ ENDPROC(__fixup_pv_table) .text __fixup_a_pv_table: +#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT + and r0, r6, #255 @ offset bits 23-16 + mov r6, r6, lsr #8 @ offset bits 31-24 +#else + mov r0, #0 @ just in case... +#endif b 3f 2: ldr ip, [r7, r3] bic ip, ip, #0x000000ff - orr ip, ip, r6 + tst ip, #0x400 @ rotate shift tells us LS or MS byte + orrne ip, ip, r6 @ mask in offset bits 31-24 + orreq ip, ip, r0 @ mask in offset bits 23-16 str ip, [r7, r3] 3: cmp r4, r5 ldrcc r7, [r4], #4 @ use branch for delay slot -- cgit v1.2.3-18-g5258 From 4d901c4271951d110afb13ee9aa73d27a6c8e53d Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 2 Feb 2011 16:33:17 +0100 Subject: ARM: 6648/1: map ATAGs when not in first 1MB of RAM If ATAGs or DTB pointer is not within first 1MB of RAM, then the boot params will not be mapped early enough, so map the 1MB region that r2 points to. Only map the first 1MB when r2 is 0. Some assembly improvements from Nicolas Pitre. Acked-by: Tony Lindgren Acked-by: Nicolas Pitre Signed-off-by: Rob Herring Signed-off-by: Russell King --- arch/arm/kernel/head.S | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index a94dd99d54c..591a2ead8ce 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -206,11 +206,17 @@ __create_page_tables: #endif /* - * Then map first 1MB of ram in case it contains our boot params. + * Then map boot params address in r2 or + * the first 1MB of ram if boot params address is not specified. */ - add r0, r4, #PAGE_OFFSET >> 18 - orr r6, r7, r8 - str r6, [r0] + mov r0, r2, lsr #20 + movs r0, r0, lsl #20 + moveq r0, r8 + sub r3, r0, r8 + add r3, r3, #PAGE_OFFSET + add r3, r4, r3, lsr #18 + orr r6, r7, r0 + str r6, [r3] #ifdef CONFIG_DEBUG_LL #ifndef CONFIG_DEBUG_ICEDCC -- cgit v1.2.3-18-g5258 From 3a6b1676c6f27f7fad1a3d6fab5a95f90b1e7402 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Tue, 15 Feb 2011 17:28:28 +0100 Subject: ARM: 6675/1: use phys_addr_t instead of unsigned long in conversion code The unsigned long datatype is not sufficient for mapping physical addresses >= 4GB. This patch ensures that the address conversion code in asm/memory.h casts to the correct type when handling physical addresses. The internal v2p macros only deal with lowmem addresses, so these do not need to be modified. Acked-by: Catalin Marinas Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/include/asm/memory.h | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index 2398b3fc026..431077c5a86 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -15,6 +15,7 @@ #include #include +#include #include #include @@ -135,8 +136,8 @@ /* * Convert a physical address to a Page Frame Number and back */ -#define __phys_to_pfn(paddr) ((paddr) >> PAGE_SHIFT) -#define __pfn_to_phys(pfn) ((pfn) << PAGE_SHIFT) +#define __phys_to_pfn(paddr) ((unsigned long)((paddr) >> PAGE_SHIFT)) +#define __pfn_to_phys(pfn) ((phys_addr_t)(pfn) << PAGE_SHIFT) /* * Convert a page to/from a physical address @@ -234,12 +235,12 @@ static inline unsigned long __phys_to_virt(unsigned long x) * translation for translating DMA addresses. Use the driver * DMA support - see dma-mapping.h. */ -static inline unsigned long virt_to_phys(const volatile void *x) +static inline phys_addr_t virt_to_phys(const volatile void *x) { return __virt_to_phys((unsigned long)(x)); } -static inline void *phys_to_virt(unsigned long x) +static inline void *phys_to_virt(phys_addr_t x) { return (void *)(__phys_to_virt((unsigned long)(x))); } -- cgit v1.2.3-18-g5258 From d5ce2b6592c49935462cba7317fa67fe8ee474ec Mon Sep 17 00:00:00 2001 From: Sukumar Ghorai Date: Fri, 28 Jan 2011 15:42:03 +0530 Subject: omap3630: nand: fix device size to work in polled mode zoom3 and 3630-sdp having the x16 nand device. This patch configure gpmc as x16 and select the currect function in driver for polled mode (without prefetch enable) transfer. Signed-off-by: Sukumar Ghorai Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-3430sdp.c | 2 +- arch/arm/mach-omap2/board-3630sdp.c | 3 ++- arch/arm/mach-omap2/board-flash.c | 10 ++++++---- arch/arm/mach-omap2/board-flash.h | 4 ++-- arch/arm/mach-omap2/board-ldp.c | 2 +- arch/arm/mach-omap2/board-zoom.c | 5 +++-- arch/arm/mach-omap2/gpmc-nand.c | 7 +++++-- 7 files changed, 20 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 31085883199..4a37c70e38b 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -812,7 +812,7 @@ static void __init omap_3430sdp_init(void) omap_serial_init(); usb_musb_init(&musb_board_data); board_smc91x_init(); - board_flash_init(sdp_flash_partitions, chip_sel_3430); + board_flash_init(sdp_flash_partitions, chip_sel_3430, 0); sdp3430_display_init(); enable_board_wakeup_source(); usb_ehci_init(&ehci_pdata); diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index 16538757291..8d1c4358ecf 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include @@ -208,7 +209,7 @@ static void __init omap_sdp_init(void) zoom_peripherals_init(); zoom_display_init(); board_smc91x_init(); - board_flash_init(sdp_flash_partitions, chip_sel_sdp); + board_flash_init(sdp_flash_partitions, chip_sel_sdp, NAND_BUSWIDTH_16); enable_board_wakeup_source(); usb_ehci_init(&ehci_pdata); } diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index fd38c05bb47..f6b72533c08 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -139,11 +139,13 @@ static struct omap_nand_platform_data board_nand_data = { }; void -__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs) +__init board_nand_init(struct mtd_partition *nand_parts, + u8 nr_parts, u8 cs, int nand_type) { board_nand_data.cs = cs; board_nand_data.parts = nand_parts; - board_nand_data.nr_parts = nr_parts; + board_nand_data.nr_parts = nr_parts; + board_nand_data.devsize = nand_type; gpmc_nand_init(&board_nand_data); } @@ -194,7 +196,7 @@ unmap: * @return - void. */ void board_flash_init(struct flash_partitions partition_info[], - char chip_sel_board[][GPMC_CS_NUM]) + char chip_sel_board[][GPMC_CS_NUM], int nand_type) { u8 cs = 0; u8 norcs = GPMC_CS_NUM + 1; @@ -250,5 +252,5 @@ void board_flash_init(struct flash_partitions partition_info[], "in GPMC\n"); else board_nand_init(partition_info[2].parts, - partition_info[2].nr_parts, nandcs); + partition_info[2].nr_parts, nandcs, nand_type); } diff --git a/arch/arm/mach-omap2/board-flash.h b/arch/arm/mach-omap2/board-flash.h index 69befe00dd2..c240a3f8d16 100644 --- a/arch/arm/mach-omap2/board-flash.h +++ b/arch/arm/mach-omap2/board-flash.h @@ -25,6 +25,6 @@ struct flash_partitions { }; extern void board_flash_init(struct flash_partitions [], - char chip_sel[][GPMC_CS_NUM]); + char chip_sel[][GPMC_CS_NUM], int nand_type); extern void board_nand_init(struct mtd_partition *nand_parts, - u8 nr_parts, u8 cs); + u8 nr_parts, u8 cs, int nand_type); diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index d8eb2cb7cbc..a3fae5697a7 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -433,7 +433,7 @@ static void __init omap_ldp_init(void) omap_serial_init(); usb_musb_init(&musb_board_data); board_nand_init(ldp_nand_partitions, - ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS); + ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0); omap2_hsmmc_init(mmc); /* link regulators to MMC adapters */ diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c index 85d4170f30a..7e3f1595d77 100644 --- a/arch/arm/mach-omap2/board-zoom.c +++ b/arch/arm/mach-omap2/board-zoom.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include @@ -124,8 +125,8 @@ static void __init omap_zoom_init(void) usb_ehci_init(&ehci_pdata); } - board_nand_init(zoom_nand_partitions, - ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS); + board_nand_init(zoom_nand_partitions, ARRAY_SIZE(zoom_nand_partitions), + ZOOM_NAND_CS, NAND_BUSWIDTH_16); zoom_debugboard_init(); zoom_peripherals_init(); zoom_display_init(); diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index 2bb29c16070..c1791d08ae5 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -12,6 +12,7 @@ #include #include #include +#include #include @@ -69,8 +70,10 @@ static int omap2_nand_gpmc_retime(void) t.wr_cycle = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->wr_cycle); /* Configure GPMC */ - gpmc_cs_configure(gpmc_nand_data->cs, - GPMC_CONFIG_DEV_SIZE, gpmc_nand_data->devsize); + if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16) + gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_SIZE, 1); + else + gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_SIZE, 0); gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_TYPE, GPMC_DEVICETYPE_NAND); err = gpmc_cs_set_timings(gpmc_nand_data->cs, &t); -- cgit v1.2.3-18-g5258 From 1b0b323c70cd5fdca967d89ed3a03dfebd84ada7 Mon Sep 17 00:00:00 2001 From: Sukumar Ghorai Date: Fri, 28 Jan 2011 15:42:04 +0530 Subject: omap3: nand: configurable transfer type per board nand transfer type (sDMA, Polled, prefetch) can be select from board file, enabling all transfer type in driver, by default. this helps in multi-omap build and to select different transfer type for different board. Signed-off-by: Sukumar Ghorai Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/nand.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-omap/include/plat/nand.h b/arch/arm/plat-omap/include/plat/nand.h index 6562cd082bb..78c0bdb98c1 100644 --- a/arch/arm/plat-omap/include/plat/nand.h +++ b/arch/arm/plat-omap/include/plat/nand.h @@ -10,6 +10,12 @@ #include +enum nand_io { + NAND_OMAP_PREFETCH_POLLED = 0, /* prefetch polled mode, default */ + NAND_OMAP_POLLED, /* polled mode, without prefetch */ + NAND_OMAP_PREFETCH_DMA /* prefetch enabled sDMA mode */ +}; + struct omap_nand_platform_data { unsigned int options; int cs; @@ -20,6 +26,7 @@ struct omap_nand_platform_data { int (*nand_setup)(void); int (*dev_ready)(struct omap_nand_platform_data *); int dma_channel; + enum nand_io xfer_type; unsigned long phys_base; int devsize; }; -- cgit v1.2.3-18-g5258 From db97eb7dfe13f6c04f0a0e77c32e2691f563ab8b Mon Sep 17 00:00:00 2001 From: Sukumar Ghorai Date: Fri, 28 Jan 2011 15:42:05 +0530 Subject: omap: gpmc: enable irq mode in gpmc add support the irq mode in GPMC. gpmc_init() function move after omap_init_irq() as it has dependecy on irq. Signed-off-by: Sukumar Ghorai Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/gpmc.c | 45 +++++++++++++++++++++++++++++++--- arch/arm/mach-omap2/io.c | 2 -- arch/arm/plat-omap/include/plat/gpmc.h | 5 +++- arch/arm/plat-omap/include/plat/irqs.h | 9 ++++++- 4 files changed, 54 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 1b7b3e7d02f..382dea83e4f 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -14,6 +14,7 @@ */ #undef DEBUG +#include #include #include #include @@ -22,6 +23,7 @@ #include #include #include +#include #include #include @@ -100,6 +102,8 @@ static void __iomem *gpmc_base; static struct clk *gpmc_l3_clk; +static irqreturn_t gpmc_handle_irq(int irq, void *dev); + static void gpmc_write_reg(int idx, u32 val) { __raw_writel(val, gpmc_base + idx); @@ -497,6 +501,10 @@ int gpmc_cs_configure(int cs, int cmd, int wval) u32 regval = 0; switch (cmd) { + case GPMC_ENABLE_IRQ: + gpmc_write_reg(GPMC_IRQENABLE, wval); + break; + case GPMC_SET_IRQ_STATUS: gpmc_write_reg(GPMC_IRQSTATUS, wval); break; @@ -678,9 +686,10 @@ static void __init gpmc_mem_init(void) } } -void __init gpmc_init(void) +static int __init gpmc_init(void) { - u32 l; + u32 l, irq; + int cs, ret = -EINVAL; char *ck = NULL; if (cpu_is_omap24xx()) { @@ -698,7 +707,7 @@ void __init gpmc_init(void) } if (WARN_ON(!ck)) - return; + return ret; gpmc_l3_clk = clk_get(NULL, ck); if (IS_ERR(gpmc_l3_clk)) { @@ -723,6 +732,36 @@ void __init gpmc_init(void) l |= (0x02 << 3) | (1 << 0); gpmc_write_reg(GPMC_SYSCONFIG, l); gpmc_mem_init(); + + /* initalize the irq_chained */ + irq = OMAP_GPMC_IRQ_BASE; + for (cs = 0; cs < GPMC_CS_NUM; cs++) { + set_irq_handler(irq, handle_simple_irq); + set_irq_flags(irq, IRQF_VALID); + irq++; + } + + ret = request_irq(INT_34XX_GPMC_IRQ, + gpmc_handle_irq, IRQF_SHARED, "gpmc", gpmc_base); + if (ret) + pr_err("gpmc: irq-%d could not claim: err %d\n", + INT_34XX_GPMC_IRQ, ret); + return ret; +} +postcore_initcall(gpmc_init); + +static irqreturn_t gpmc_handle_irq(int irq, void *dev) +{ + u8 cs; + + if (irq != INT_34XX_GPMC_IRQ) + return IRQ_HANDLED; + /* check cs to invoke the irq */ + cs = ((gpmc_read_reg(GPMC_PREFETCH_CONFIG1)) >> CS_NUM_SHIFT) & 0x7; + if (OMAP_GPMC_IRQ_BASE+cs <= OMAP_GPMC_IRQ_END) + generic_handle_irq(OMAP_GPMC_IRQ_BASE+cs); + + return IRQ_HANDLED; } #ifdef CONFIG_ARCH_OMAP3 diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index b8b49e4ae92..657f3c84687 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -30,7 +30,6 @@ #include #include -#include #include #include "clock2xxx.h" @@ -422,7 +421,6 @@ void __init omap2_init_common_devices(struct omap_sdrc_params *sdrc_cs0, omap2_sdrc_init(sdrc_cs0, sdrc_cs1); _omap2_init_reprogram_sdrc(); } - gpmc_init(); omap_irq_base_init(); } diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h index 85ded598853..9c060da0a87 100644 --- a/arch/arm/plat-omap/include/plat/gpmc.h +++ b/arch/arm/plat-omap/include/plat/gpmc.h @@ -41,6 +41,8 @@ #define GPMC_NAND_ADDRESS 0x0000000b #define GPMC_NAND_DATA 0x0000000c +#define GPMC_ENABLE_IRQ 0x0000000d + /* ECC commands */ #define GPMC_ECC_READ 0 /* Reset Hardware ECC for read */ #define GPMC_ECC_WRITE 1 /* Reset Hardware ECC for write */ @@ -78,6 +80,8 @@ #define WR_RD_PIN_MONITORING 0x00600000 #define GPMC_PREFETCH_STATUS_FIFO_CNT(val) ((val >> 24) & 0x7F) #define GPMC_PREFETCH_STATUS_COUNT(val) (val & 0x00003fff) +#define GPMC_IRQ_FIFOEVENTENABLE 0x01 +#define GPMC_IRQ_COUNT_EVENT 0x02 /* * Note that all values in this struct are in nanoseconds except sync_clk @@ -135,7 +139,6 @@ extern int gpmc_prefetch_enable(int cs, int dma_mode, extern int gpmc_prefetch_reset(int cs); extern void omap3_gpmc_save_context(void); extern void omap3_gpmc_restore_context(void); -extern void gpmc_init(void); extern int gpmc_read_status(int cmd); extern int gpmc_cs_configure(int cs, int cmd, int wval); extern int gpmc_nand_read(int cs, int cmd); diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h index 2910de921c5..1b911681e91 100644 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ b/arch/arm/plat-omap/include/plat/irqs.h @@ -318,6 +318,7 @@ #define INT_34XX_PRCM_MPU_IRQ 11 #define INT_34XX_MCBSP1_IRQ 16 #define INT_34XX_MCBSP2_IRQ 17 +#define INT_34XX_GPMC_IRQ 20 #define INT_34XX_MCBSP3_IRQ 22 #define INT_34XX_MCBSP4_IRQ 23 #define INT_34XX_CAM_IRQ 24 @@ -411,7 +412,13 @@ #define TWL_IRQ_END TWL6030_IRQ_END #endif -#define NR_IRQS TWL_IRQ_END +/* GPMC related */ +#define OMAP_GPMC_IRQ_BASE (TWL_IRQ_END) +#define OMAP_GPMC_NR_IRQS 7 +#define OMAP_GPMC_IRQ_END (OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS) + + +#define NR_IRQS OMAP_GPMC_IRQ_END #define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32)) -- cgit v1.2.3-18-g5258 From 4e070376165a9b7f245fada77645b81352c6ec78 Mon Sep 17 00:00:00 2001 From: Sukumar Ghorai Date: Fri, 28 Jan 2011 15:42:06 +0530 Subject: omap3: nand: prefetch in irq mode support This patch enable prefetch-irq mode for nand transfer(read, write) Signed-off-by: Vimal Singh Signed-off-by: Sukumar Ghorai Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-flash.c | 2 ++ arch/arm/plat-omap/include/plat/nand.h | 4 +++- 2 files changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index f6b72533c08..19645095d59 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include @@ -147,6 +148,7 @@ __init board_nand_init(struct mtd_partition *nand_parts, board_nand_data.nr_parts = nr_parts; board_nand_data.devsize = nand_type; + board_nand_data.gpmc_irq = OMAP_GPMC_IRQ_BASE + cs; gpmc_nand_init(&board_nand_data); } #else diff --git a/arch/arm/plat-omap/include/plat/nand.h b/arch/arm/plat-omap/include/plat/nand.h index 78c0bdb98c1..ae5e0538303 100644 --- a/arch/arm/plat-omap/include/plat/nand.h +++ b/arch/arm/plat-omap/include/plat/nand.h @@ -13,7 +13,8 @@ enum nand_io { NAND_OMAP_PREFETCH_POLLED = 0, /* prefetch polled mode, default */ NAND_OMAP_POLLED, /* polled mode, without prefetch */ - NAND_OMAP_PREFETCH_DMA /* prefetch enabled sDMA mode */ + NAND_OMAP_PREFETCH_DMA, /* prefetch enabled sDMA mode */ + NAND_OMAP_PREFETCH_IRQ /* prefetch enabled irq mode */ }; struct omap_nand_platform_data { @@ -26,6 +27,7 @@ struct omap_nand_platform_data { int (*nand_setup)(void); int (*dev_ready)(struct omap_nand_platform_data *); int dma_channel; + int gpmc_irq; enum nand_io xfer_type; unsigned long phys_base; int devsize; -- cgit v1.2.3-18-g5258 From 317379a975c07fe63bc4f86dabd668df96ff3df2 Mon Sep 17 00:00:00 2001 From: Sukumar Ghorai Date: Fri, 28 Jan 2011 15:42:07 +0530 Subject: omap3: nand: configurable fifo threshold to gain the throughput Configure the FIFO THREASHOLD value different for read and write to keep busy both filling and to drain out of FIFO at reading and writing. Signed-off-by: Vimal Singh Signed-off-by: Sukumar Ghorai Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/gpmc.c | 11 +++++++---- arch/arm/plat-omap/include/plat/gpmc.h | 5 ++++- 2 files changed, 11 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 382dea83e4f..674174365f7 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -60,7 +60,6 @@ #define GPMC_CHUNK_SHIFT 24 /* 16 MB */ #define GPMC_SECTION_SHIFT 28 /* 128 MB */ -#define PREFETCH_FIFOTHRESHOLD (0x40 << 8) #define CS_NUM_SHIFT 24 #define ENABLE_PREFETCH (0x1 << 7) #define DMA_MPU_MODE 2 @@ -606,15 +605,19 @@ EXPORT_SYMBOL(gpmc_nand_write); /** * gpmc_prefetch_enable - configures and starts prefetch transfer * @cs: cs (chip select) number + * @fifo_th: fifo threshold to be used for read/ write * @dma_mode: dma mode enable (1) or disable (0) * @u32_count: number of bytes to be transferred * @is_write: prefetch read(0) or write post(1) mode */ -int gpmc_prefetch_enable(int cs, int dma_mode, +int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode, unsigned int u32_count, int is_write) { - if (!(gpmc_read_reg(GPMC_PREFETCH_CONTROL))) { + if (fifo_th > PREFETCH_FIFOTHRESHOLD_MAX) { + pr_err("gpmc: fifo threshold is not supported\n"); + return -1; + } else if (!(gpmc_read_reg(GPMC_PREFETCH_CONTROL))) { /* Set the amount of bytes to be prefetched */ gpmc_write_reg(GPMC_PREFETCH_CONFIG2, u32_count); @@ -622,7 +625,7 @@ int gpmc_prefetch_enable(int cs, int dma_mode, * enable the engine. Set which cs is has requested for. */ gpmc_write_reg(GPMC_PREFETCH_CONFIG1, ((cs << CS_NUM_SHIFT) | - PREFETCH_FIFOTHRESHOLD | + PREFETCH_FIFOTHRESHOLD(fifo_th) | ENABLE_PREFETCH | (dma_mode << DMA_MPU_MODE) | (0x1 & is_write))); diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h index 9c060da0a87..a2434639063 100644 --- a/arch/arm/plat-omap/include/plat/gpmc.h +++ b/arch/arm/plat-omap/include/plat/gpmc.h @@ -83,6 +83,9 @@ #define GPMC_IRQ_FIFOEVENTENABLE 0x01 #define GPMC_IRQ_COUNT_EVENT 0x02 +#define PREFETCH_FIFOTHRESHOLD_MAX 0x40 +#define PREFETCH_FIFOTHRESHOLD(val) ((val) << 8) + /* * Note that all values in this struct are in nanoseconds except sync_clk * (which is in picoseconds), while the register values are in gpmc_fck cycles. @@ -134,7 +137,7 @@ extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base); extern void gpmc_cs_free(int cs); extern int gpmc_cs_set_reserved(int cs, int reserved); extern int gpmc_cs_reserved(int cs); -extern int gpmc_prefetch_enable(int cs, int dma_mode, +extern int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode, unsigned int u32_count, int is_write); extern int gpmc_prefetch_reset(int cs); extern void omap3_gpmc_save_context(void); -- cgit v1.2.3-18-g5258 From f3d73f362d689a1d044e77964864f0a8ea0217f3 Mon Sep 17 00:00:00 2001 From: Sukumar Ghorai Date: Fri, 28 Jan 2011 15:42:08 +0530 Subject: omap3: nand: ecc layout select from board file This patch makes it possible to select sw or hw (different layout options) ecc scheme supported by omap nand driver. Signed-off-by: Vimal Singh Signed-off-by: Sukumar Ghorai Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-flash.c | 1 + arch/arm/plat-omap/include/plat/gpmc.h | 6 ++++++ arch/arm/plat-omap/include/plat/nand.h | 2 ++ 3 files changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index 19645095d59..a7681981201 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -148,6 +148,7 @@ __init board_nand_init(struct mtd_partition *nand_parts, board_nand_data.nr_parts = nr_parts; board_nand_data.devsize = nand_type; + board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT; board_nand_data.gpmc_irq = OMAP_GPMC_IRQ_BASE + cs; gpmc_nand_init(&board_nand_data); } diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h index a2434639063..773351bc25a 100644 --- a/arch/arm/plat-omap/include/plat/gpmc.h +++ b/arch/arm/plat-omap/include/plat/gpmc.h @@ -86,6 +86,12 @@ #define PREFETCH_FIFOTHRESHOLD_MAX 0x40 #define PREFETCH_FIFOTHRESHOLD(val) ((val) << 8) +enum omap_ecc { + /* 1-bit ecc: stored at end of spare area */ + OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */ + OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */ +}; + /* * Note that all values in this struct are in nanoseconds except sync_clk * (which is in picoseconds), while the register values are in gpmc_fck cycles. diff --git a/arch/arm/plat-omap/include/plat/nand.h b/arch/arm/plat-omap/include/plat/nand.h index ae5e0538303..d86d1ecf006 100644 --- a/arch/arm/plat-omap/include/plat/nand.h +++ b/arch/arm/plat-omap/include/plat/nand.h @@ -8,6 +8,7 @@ * published by the Free Software Foundation. */ +#include #include enum nand_io { @@ -31,6 +32,7 @@ struct omap_nand_platform_data { enum nand_io xfer_type; unsigned long phys_base; int devsize; + enum omap_ecc ecc_opt; }; /* minimum size for IO mapping */ -- cgit v1.2.3-18-g5258 From f040d33253b2daf6f305fc35fca2399047ced028 Mon Sep 17 00:00:00 2001 From: Sukumar Ghorai Date: Fri, 28 Jan 2011 15:42:09 +0530 Subject: omap3: nand: making ecc layout as compatible with romcode ecc This patch overrides nand ecc layout and bad block descriptor (for 8-bit device) to support hw ecc in romcode layout. So as to have in sync with ecc layout throughout; i.e. x-loader, u-boot and kernel. This enables to flash x-loader, u-boot, kernel, FS images from kernel itself and compatiable with other tools. This patch does not enables this feature by default and need to pass from board file to enable for any board. Signed-off-by: Vimal Singh Signed-off-by: Sukumar Ghorai Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/gpmc.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h index 773351bc25a..12b31616503 100644 --- a/arch/arm/plat-omap/include/plat/gpmc.h +++ b/arch/arm/plat-omap/include/plat/gpmc.h @@ -90,6 +90,8 @@ enum omap_ecc { /* 1-bit ecc: stored at end of spare area */ OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */ OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */ + /* 1-bit ecc: stored at begining of spare area as romcode */ + OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */ }; /* -- cgit v1.2.3-18-g5258 From 4b087ff8572c7e7095787ca14aa72e39c80859bd Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Thu, 3 Feb 2011 12:45:21 +0000 Subject: omap3sdp: Fix regulator mapping for ads7846 TS controller On the OMAP3430SDP board, the ads7846 touchscreen controller is powered by VAUX3 regulator (supplying 2.8v). Fix this mapping in the board file, and hence prevent the ads7846 driver init to fail with the below error.. ads7846 spi1.0: unable to get regulator: -19 Signed-off-by: Rajendra Nayak Reviewed-by: Felipe Balbi Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-3430sdp.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 31085883199..7f8c7a73c53 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -426,6 +426,11 @@ static struct twl4030_madc_platform_data sdp3430_madc_data = { .irq_line = 1, }; +/* ads7846 on SPI */ +static struct regulator_consumer_supply sdp3430_vaux3_supplies[] = { + REGULATOR_SUPPLY("vcc", "spi1.0"), +}; + /* * Apply all the fixed voltages since most versions of U-Boot * don't bother with that initialization. @@ -468,6 +473,8 @@ static struct regulator_init_data sdp3430_vaux3 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(sdp3430_vaux3_supplies), + .consumer_supplies = sdp3430_vaux3_supplies, }; /* VAUX4 for OMAP VDD_CSI2 (camera) */ -- cgit v1.2.3-18-g5258 From 1435ca0fc1a269f9496343e24223a0fc430aff7a Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Mon, 7 Feb 2011 10:46:58 +0200 Subject: OMAP: OneNAND: fix 104MHz support 104MHz needs a latency of 8 clock cycles and the VHF flag must be set. Also t_rdyo is specified as "not applicable" so pick a lower value, and force at least 1 clk between AVD High to OE Low. Signed-off-by: Adrian Hunter Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/gpmc-onenand.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index 3a7d25fb00e..3a4307b8f7c 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -94,7 +94,7 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) } static void set_onenand_cfg(void __iomem *onenand_base, int latency, - int sync_read, int sync_write, int hf) + int sync_read, int sync_write, int hf, int vhf) { u32 reg; @@ -114,6 +114,10 @@ static void set_onenand_cfg(void __iomem *onenand_base, int latency, reg |= ONENAND_SYS_CFG1_HF; else reg &= ~ONENAND_SYS_CFG1_HF; + if (vhf) + reg |= ONENAND_SYS_CFG1_VHF; + else + reg &= ~ONENAND_SYS_CFG1_VHF; writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); } @@ -130,7 +134,7 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, const int t_wph = 30; int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo; int tick_ns, div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency; - int first_time = 0, hf = 0, sync_read = 0, sync_write = 0; + int first_time = 0, hf = 0, vhf = 0, sync_read = 0, sync_write = 0; int err, ticks_cez; int cs = cfg->cs; u32 reg; @@ -180,7 +184,7 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, t_avdh = 2; t_ach = 3; t_aavdh = 6; - t_rdyo = 9; + t_rdyo = 6; break; case 83: min_gpmc_clk_period = 12000; /* 83 MHz */ @@ -217,7 +221,11 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, gpmc_clk_ns = gpmc_ticks_to_ns(div); if (gpmc_clk_ns < 15) /* >66Mhz */ hf = 1; - if (hf) + if (gpmc_clk_ns < 12) /* >83Mhz */ + vhf = 1; + if (vhf) + latency = 8; + else if (hf) latency = 6; else if (gpmc_clk_ns >= 25) /* 40 MHz*/ latency = 3; @@ -226,7 +234,7 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, if (first_time) set_onenand_cfg(onenand_base, latency, - sync_read, sync_write, hf); + sync_read, sync_write, hf, vhf); if (div == 1) { reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2); @@ -264,6 +272,9 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, /* Read */ t.adv_rd_off = gpmc_ticks_to_ns(fclk_offset + gpmc_ns_to_ticks(t_avdh)); t.oe_on = gpmc_ticks_to_ns(fclk_offset + gpmc_ns_to_ticks(t_ach)); + /* Force at least 1 clk between AVD High to OE Low */ + if (t.oe_on <= t.adv_rd_off) + t.oe_on = t.adv_rd_off + gpmc_round_ns_to_ticks(1); t.access = gpmc_ticks_to_ns(fclk_offset + (latency + 1) * div); t.oe_off = t.access + gpmc_round_ns_to_ticks(1); t.cs_rd_off = t.oe_off; @@ -317,7 +328,7 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, if (err) return err; - set_onenand_cfg(onenand_base, latency, sync_read, sync_write, hf); + set_onenand_cfg(onenand_base, latency, sync_read, sync_write, hf, vhf); return 0; } -- cgit v1.2.3-18-g5258 From 3ad2d861362031dac8b2bba78a8f4c575300948f Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Mon, 7 Feb 2011 10:46:59 +0200 Subject: OMAP: OneNAND: determine frequency in one place OneNAND frequency is determined when calculating GPMC timings. Return that value instead of determining it again in the OMAP OneNAND driver. Signed-off-by: Adrian Hunter Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/gpmc-onenand.c | 10 ++++++---- arch/arm/plat-omap/include/plat/onenand.h | 2 +- 2 files changed, 7 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index 3a4307b8f7c..46786a606e9 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -123,7 +123,7 @@ static void set_onenand_cfg(void __iomem *onenand_base, int latency, static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, void __iomem *onenand_base, - int freq) + int *freq_ptr) { struct gpmc_timings t; const int t_cer = 15; @@ -136,7 +136,7 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, int tick_ns, div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency; int first_time = 0, hf = 0, vhf = 0, sync_read = 0, sync_write = 0; int err, ticks_cez; - int cs = cfg->cs; + int cs = cfg->cs, freq = *freq_ptr; u32 reg; if (cfg->flags & ONENAND_SYNC_READ) { @@ -330,16 +330,18 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, set_onenand_cfg(onenand_base, latency, sync_read, sync_write, hf, vhf); + *freq_ptr = freq; + return 0; } -static int gpmc_onenand_setup(void __iomem *onenand_base, int freq) +static int gpmc_onenand_setup(void __iomem *onenand_base, int *freq_ptr) { struct device *dev = &gpmc_onenand_device.dev; /* Set sync timings in GPMC */ if (omap2_onenand_set_sync_mode(gpmc_onenand_data, onenand_base, - freq) < 0) { + freq_ptr) < 0) { dev_err(dev, "Unable to set synchronous mode\n"); return -EINVAL; } diff --git a/arch/arm/plat-omap/include/plat/onenand.h b/arch/arm/plat-omap/include/plat/onenand.h index affe87e9ece..86118dc3f19 100644 --- a/arch/arm/plat-omap/include/plat/onenand.h +++ b/arch/arm/plat-omap/include/plat/onenand.h @@ -20,7 +20,7 @@ struct omap_onenand_platform_data { int gpio_irq; struct mtd_partition *parts; int nr_parts; - int (*onenand_setup)(void __iomem *, int freq); + int (*onenand_setup)(void __iomem *, int *freq_ptr); int dma_channel; u8 flags; u8 regulator_can_sleep; -- cgit v1.2.3-18-g5258 From 5714b7ed6b3e3c00c0d4719bb66757e64c30ecf6 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Mon, 7 Feb 2011 10:47:00 +0200 Subject: OMAP: OneNAND: let boards determine OneNAND frequency OneNAND version ID may not give the highest frequency supported and some OneNAND's have setup times that are clock dependent. Let the board provide that information. Signed-off-by: Adrian Hunter Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/gpmc-onenand.c | 80 +++++++++++++++++++++++-------- arch/arm/plat-omap/include/plat/onenand.h | 8 ++++ 2 files changed, 67 insertions(+), 21 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index 46786a606e9..d776ded9830 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -121,6 +121,47 @@ static void set_onenand_cfg(void __iomem *onenand_base, int latency, writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); } +static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg, + void __iomem *onenand_base, bool *clk_dep) +{ + u16 ver = readw(onenand_base + ONENAND_REG_VERSION_ID); + int freq = 0; + + if (cfg->get_freq) { + struct onenand_freq_info fi; + + fi.maf_id = readw(onenand_base + ONENAND_REG_MANUFACTURER_ID); + fi.dev_id = readw(onenand_base + ONENAND_REG_DEVICE_ID); + fi.ver_id = ver; + freq = cfg->get_freq(&fi, clk_dep); + if (freq) + return freq; + } + + switch ((ver >> 4) & 0xf) { + case 0: + freq = 40; + break; + case 1: + freq = 54; + break; + case 2: + freq = 66; + break; + case 3: + freq = 83; + break; + case 4: + freq = 104; + break; + default: + freq = 54; + break; + } + + return freq; +} + static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, void __iomem *onenand_base, int *freq_ptr) @@ -138,6 +179,7 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, int err, ticks_cez; int cs = cfg->cs, freq = *freq_ptr; u32 reg; + bool clk_dep = false; if (cfg->flags & ONENAND_SYNC_READ) { sync_read = 1; @@ -152,27 +194,7 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, err = omap2_onenand_set_async_mode(cs, onenand_base); if (err) return err; - reg = readw(onenand_base + ONENAND_REG_VERSION_ID); - switch ((reg >> 4) & 0xf) { - case 0: - freq = 40; - break; - case 1: - freq = 54; - break; - case 2: - freq = 66; - break; - case 3: - freq = 83; - break; - case 4: - freq = 104; - break; - default: - freq = 54; - break; - } + freq = omap2_onenand_get_freq(cfg, onenand_base, &clk_dep); first_time = 1; } @@ -232,6 +254,22 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, else latency = 4; + if (clk_dep) { + if (gpmc_clk_ns < 12) { /* >83Mhz */ + t_ces = 3; + t_avds = 4; + } else if (gpmc_clk_ns < 15) { /* >66Mhz */ + t_ces = 5; + t_avds = 4; + } else if (gpmc_clk_ns < 25) { /* >40Mhz */ + t_ces = 6; + t_avds = 5; + } else { + t_ces = 7; + t_avds = 7; + } + } + if (first_time) set_onenand_cfg(onenand_base, latency, sync_read, sync_write, hf, vhf); diff --git a/arch/arm/plat-omap/include/plat/onenand.h b/arch/arm/plat-omap/include/plat/onenand.h index 86118dc3f19..cbe897ca7f9 100644 --- a/arch/arm/plat-omap/include/plat/onenand.h +++ b/arch/arm/plat-omap/include/plat/onenand.h @@ -15,12 +15,20 @@ #define ONENAND_SYNC_READ (1 << 0) #define ONENAND_SYNC_READWRITE (1 << 1) +struct onenand_freq_info { + u16 maf_id; + u16 dev_id; + u16 ver_id; +}; + struct omap_onenand_platform_data { int cs; int gpio_irq; struct mtd_partition *parts; int nr_parts; int (*onenand_setup)(void __iomem *, int *freq_ptr); + int (*get_freq)(const struct onenand_freq_info *freq_info, + bool *clk_dep); int dma_channel; u8 flags; u8 regulator_can_sleep; -- cgit v1.2.3-18-g5258 From 4f85f99b1e9ae9d62e3ea9f0cd3827020e0d9ba2 Mon Sep 17 00:00:00 2001 From: David Cohen Date: Tue, 15 Feb 2011 11:31:13 +0000 Subject: omap: IOMMU: add missing function declaration Declaration of exported function 'iopgtable_lookup_entry' is missing from header file. Currently we have a sparse warning as it's not being used externally. Adding its declaration to avoid such warning and allow its usage in future. Signed-off-by: David Cohen Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/iommu.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-omap/include/plat/iommu.h b/arch/arm/plat-omap/include/plat/iommu.h index 69230d68553..19cbb5e9ece 100644 --- a/arch/arm/plat-omap/include/plat/iommu.h +++ b/arch/arm/plat-omap/include/plat/iommu.h @@ -154,6 +154,8 @@ extern void flush_iotlb_range(struct iommu *obj, u32 start, u32 end); extern void flush_iotlb_all(struct iommu *obj); extern int iopgtable_store_entry(struct iommu *obj, struct iotlb_entry *e); +extern void iopgtable_lookup_entry(struct iommu *obj, u32 da, u32 **ppgd, + u32 **ppte); extern size_t iopgtable_clear_entry(struct iommu *obj, u32 iova); extern int iommu_set_da_range(struct iommu *obj, u32 start, u32 end); -- cgit v1.2.3-18-g5258 From f69eefd18d5201cd512c862a4bd27b8e8febd20b Mon Sep 17 00:00:00 2001 From: Sanjeev Premi Date: Tue, 15 Feb 2011 10:57:31 +0000 Subject: omap3: fix minor typos This patch fixes typos that were remaining after the file and functions were renamed. Signed-off-by: Sanjeev Premi Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-flash.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index fd38c05bb47..ce61200ae68 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -1,5 +1,5 @@ /* - * board-sdp-flash.c + * board-flash.c * Modified from mach-omap2/board-3430sdp-flash.c * * Copyright (C) 2009 Nokia Corporation @@ -189,7 +189,7 @@ unmap: } /** - * sdp3430_flash_init - Identify devices connected to GPMC and register. + * board_flash_init - Identify devices connected to GPMC and register. * * @return - void. */ -- cgit v1.2.3-18-g5258 From adc5430b473db2842a96fcce1ffbd43049757d3b Mon Sep 17 00:00:00 2001 From: Sanjeev Premi Date: Tue, 15 Feb 2011 10:57:32 +0000 Subject: omap3: flash: use pr_err instead of printk Change all occurences of printf() to pr_err(). Includes minor formatting changes as result of this change. Signed-off-by: Sanjeev Premi Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-flash.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index ce61200ae68..86d1020da15 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -73,11 +73,11 @@ __init board_nor_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs) + FLASH_SIZE_SDPV1 - 1; } if (err < 0) { - printk(KERN_ERR "NOR: Can't request GPMC CS\n"); + pr_err("NOR: Can't request GPMC CS\n"); return; } if (platform_device_register(&board_nor_device) < 0) - printk(KERN_ERR "Unable to register NOR device\n"); + pr_err("Unable to register NOR device\n"); } #if defined(CONFIG_MTD_ONENAND_OMAP2) || \ @@ -208,7 +208,7 @@ void board_flash_init(struct flash_partitions partition_info[], */ idx = get_gpmc0_type(); if (idx >= MAX_SUPPORTED_GPMC_CONFIG) { - printk(KERN_ERR "%s: Invalid chip select: %d\n", __func__, cs); + pr_err("%s: Invalid chip select: %d\n", __func__, cs); return; } config_sel = (unsigned char *)(chip_sel_board[idx]); @@ -232,22 +232,19 @@ void board_flash_init(struct flash_partitions partition_info[], } if (norcs > GPMC_CS_NUM) - printk(KERN_INFO "NOR: Unable to find configuration " - "in GPMC\n"); + pr_err("NOR: Unable to find configuration in GPMC\n"); else board_nor_init(partition_info[0].parts, partition_info[0].nr_parts, norcs); if (onenandcs > GPMC_CS_NUM) - printk(KERN_INFO "OneNAND: Unable to find configuration " - "in GPMC\n"); + pr_err("OneNAND: Unable to find configuration in GPMC\n"); else board_onenand_init(partition_info[1].parts, partition_info[1].nr_parts, onenandcs); if (nandcs > GPMC_CS_NUM) - printk(KERN_INFO "NAND: Unable to find configuration " - "in GPMC\n"); + pr_err("NAND: Unable to find configuration in GPMC\n"); else board_nand_init(partition_info[2].parts, partition_info[2].nr_parts, nandcs); -- cgit v1.2.3-18-g5258 From e49c4d27ab5ffd0d8707685af9ca2866a95660e8 Mon Sep 17 00:00:00 2001 From: Nishant Kamat Date: Thu, 17 Feb 2011 09:55:03 -0800 Subject: omap: Add chip id recognition for OMAP4 ES2.1 and ES2.2 Allow OMAP4 ES2.1 and ES2.2 revisions to be recognized in the omap4_check_revision() function. Mainly, ES2.1 has fixes that allow LPDDR to be used at 100% OPP (400MHz). ES2.2 additionally has a couple of power management fixes (to reduce leakage), an I2C1 SDA line state fix, and a floating point write corruption fix (cortex erratum). Even though the current mainline support doesn't need to distinguish between ES2.X versions, it's still useful to know the correct silicon rev when issues are reported. Moreover, these id checks can be used by power management code that selects suitable OPPs considering the memory speed limitation on ES2.0. For details about the silicon errata on OMAP4430, refer http://focus.ti.com/pdfs/wtbu/SWPZ009A_OMAP4430_Errata_Public_vA.pdf Signed-off-by: Nishant Kamat Acked-by: Santosh Shilimkar Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/id.c | 31 ++++++++++++++++++++----------- arch/arm/plat-omap/include/plat/cpu.h | 16 +++++++++++----- 2 files changed, 31 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 5c25f1b5523..3168b17bc26 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -6,7 +6,7 @@ * Copyright (C) 2005 Nokia Corporation * Written by Tony Lindgren * - * Copyright (C) 2009 Texas Instruments + * Copyright (C) 2009-11 Texas Instruments * Added OMAP4 support - Santosh Shilimkar * * This program is free software; you can redistribute it and/or modify @@ -328,7 +328,7 @@ static void __init omap4_check_revision(void) */ idcode = read_tap_reg(OMAP_TAP_IDCODE); hawkeye = (idcode >> 12) & 0xffff; - rev = (idcode >> 28) & 0xff; + rev = (idcode >> 28) & 0xf; /* * Few initial ES2.0 samples IDCODE is same as ES1.0 @@ -347,22 +347,31 @@ static void __init omap4_check_revision(void) omap_chip.oc |= CHIP_IS_OMAP4430ES1; break; case 1: + default: omap_revision = OMAP4430_REV_ES2_0; omap_chip.oc |= CHIP_IS_OMAP4430ES2; + } + break; + case 0xb95c: + switch (rev) { + case 3: + omap_revision = OMAP4430_REV_ES2_1; + omap_chip.oc |= CHIP_IS_OMAP4430ES2_1; break; + case 4: default: - omap_revision = OMAP4430_REV_ES2_0; - omap_chip.oc |= CHIP_IS_OMAP4430ES2; - } - break; + omap_revision = OMAP4430_REV_ES2_2; + omap_chip.oc |= CHIP_IS_OMAP4430ES2_2; + } + break; default: - /* Unknown default to latest silicon rev as default*/ - omap_revision = OMAP4430_REV_ES2_0; - omap_chip.oc |= CHIP_IS_OMAP4430ES2; + /* Unknown default to latest silicon rev as default */ + omap_revision = OMAP4430_REV_ES2_2; + omap_chip.oc |= CHIP_IS_OMAP4430ES2_2; } - pr_info("OMAP%04x ES%d.0\n", - omap_rev() >> 16, ((omap_rev() >> 12) & 0xf) + 1); + pr_info("OMAP%04x ES%d.%d\n", omap_rev() >> 16, + ((omap_rev() >> 12) & 0xf), ((omap_rev() >> 8) & 0xf)); } #define OMAP3_SHOW_FEATURE(feat) \ diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index be99438d385..8198bb6cdb5 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -5,7 +5,7 @@ * * Copyright (C) 2004, 2008 Nokia Corporation * - * Copyright (C) 2009 Texas Instruments. + * Copyright (C) 2009-11 Texas Instruments. * * Written by Tony Lindgren * @@ -405,8 +405,10 @@ IS_OMAP_TYPE(3517, 0x3517) #define TI8168_REV_ES1_1 (TI816X_CLASS | (OMAP_REVBITS_01 << 8)) #define OMAP443X_CLASS 0x44300044 -#define OMAP4430_REV_ES1_0 OMAP443X_CLASS -#define OMAP4430_REV_ES2_0 0x44301044 +#define OMAP4430_REV_ES1_0 (OMAP443X_CLASS | (0x10 << 8)) +#define OMAP4430_REV_ES2_0 (OMAP443X_CLASS | (0x20 << 8)) +#define OMAP4430_REV_ES2_1 (OMAP443X_CLASS | (0x21 << 8)) +#define OMAP4430_REV_ES2_2 (OMAP443X_CLASS | (0x22 << 8)) /* * omap_chip bits @@ -434,12 +436,16 @@ IS_OMAP_TYPE(3517, 0x3517) #define CHIP_IS_OMAP3630ES1_1 (1 << 9) #define CHIP_IS_OMAP3630ES1_2 (1 << 10) #define CHIP_IS_OMAP4430ES2 (1 << 11) +#define CHIP_IS_OMAP4430ES2_1 (1 << 12) +#define CHIP_IS_OMAP4430ES2_2 (1 << 13) #define CHIP_IS_TI816X (1 << 14) #define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430) -#define CHIP_IS_OMAP4430 (CHIP_IS_OMAP4430ES1 | \ - CHIP_IS_OMAP4430ES2) +#define CHIP_IS_OMAP4430 (CHIP_IS_OMAP4430ES1 | \ + CHIP_IS_OMAP4430ES2 | \ + CHIP_IS_OMAP4430ES2_1 | \ + CHIP_IS_OMAP4430ES2_2) /* * "GE" here represents "greater than or equal to" in terms of ES -- cgit v1.2.3-18-g5258 From 4822b7fc6d4870685a9feadfc348d48f5e47460a Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Mon, 14 Feb 2011 15:34:57 -0800 Subject: x86, trampoline: Common infrastructure for low memory trampolines Common infrastructure for low memory trampolines. This code installs the trampolines permanently in low memory very early. It also permits multiple pieces of code to be used for this purpose. This code also introduces a standard infrastructure for computing symbol addresses in the trampoline code. The only change to the actual SMP trampolines themselves is that the 64-bit trampoline has been made reusable -- the previous version would overwrite the code with a status variable; this moves the status variable to a separate location. Signed-off-by: H. Peter Anvin LKML-Reference: <4D5DFBE4.7090104@intel.com> Cc: Rafael J. Wysocki Cc: Matthieu Castet Cc: Stephen Rothwell --- arch/x86/Kconfig | 4 ---- arch/x86/kernel/Makefile | 3 +-- arch/x86/kernel/head32.c | 9 --------- arch/x86/kernel/head_64.S | 3 +-- arch/x86/kernel/setup.c | 2 +- arch/x86/kernel/smpboot.c | 10 ++++++---- arch/x86/kernel/trampoline.c | 42 +++++++++++++++++++++-------------------- arch/x86/kernel/trampoline_32.S | 15 +++++++++++---- arch/x86/kernel/trampoline_64.S | 30 +++++++++++++++++------------ arch/x86/kernel/vmlinux.lds.S | 13 +++++++++++++ 10 files changed, 73 insertions(+), 58 deletions(-) (limited to 'arch') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index d5ed94d30aa..1359bc9f4fd 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -217,10 +217,6 @@ config X86_HT def_bool y depends on SMP -config X86_TRAMPOLINE - def_bool y - depends on SMP || (64BIT && ACPI_SLEEP) - config X86_32_LAZY_GS def_bool y depends on X86_32 && !CC_STACKPROTECTOR diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 34244b2cd88..2e8ce0deae4 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -47,7 +47,7 @@ obj-y += tsc.o io_delay.o rtc.o obj-y += pci-iommu_table.o obj-y += resource.o -obj-$(CONFIG_X86_TRAMPOLINE) += trampoline.o +obj-y += trampoline.o trampoline_$(BITS).o obj-y += process.o obj-y += i387.o xsave.o obj-y += ptrace.o @@ -69,7 +69,6 @@ obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_SMP) += smpboot.o tsc_sync.o obj-$(CONFIG_SMP) += setup_percpu.o obj-$(CONFIG_X86_64_SMP) += tsc_sync.o -obj-$(CONFIG_X86_TRAMPOLINE) += trampoline_$(BITS).o obj-$(CONFIG_X86_MPPARSE) += mpparse.o obj-y += apic/ obj-$(CONFIG_X86_REBOOTFIXUPS) += reboot_fixups_32.o diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c index 7f138b3c3c5..d6d6bb36193 100644 --- a/arch/x86/kernel/head32.c +++ b/arch/x86/kernel/head32.c @@ -34,15 +34,6 @@ void __init i386_start_kernel(void) { memblock_init(); -#ifdef CONFIG_X86_TRAMPOLINE - /* - * But first pinch a few for the stack/trampoline stuff - * FIXME: Don't need the extra page at 4K, but need to fix - * trampoline before removing it. (see the GDT stuff) - */ - memblock_x86_reserve_range(PAGE_SIZE, PAGE_SIZE + PAGE_SIZE, "EX TRAMPOLINE"); -#endif - memblock_x86_reserve_range(__pa_symbol(&_text), __pa_symbol(&__bss_stop), "TEXT DATA BSS"); #ifdef CONFIG_BLK_DEV_INITRD diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index 239046bd447..e11e39478a4 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -136,10 +136,9 @@ ident_complete: /* Fixup phys_base */ addq %rbp, phys_base(%rip) -#ifdef CONFIG_X86_TRAMPOLINE + /* Fixup trampoline */ addq %rbp, trampoline_level4_pgt + 0(%rip) addq %rbp, trampoline_level4_pgt + (511*8)(%rip) -#endif /* Due to ENTRY(), sometimes the empty space gets filled with * zeros. Better take a jmp than relying on empty space being diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index d3cfe26c025..994ea20e177 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -935,7 +935,7 @@ void __init setup_arch(char **cmdline_p) printk(KERN_DEBUG "initial memory mapped : 0 - %08lx\n", max_pfn_mapped<thread.sp; /* start_ip had better be page-aligned! */ - start_ip = setup_trampoline(); + start_ip = trampoline_address(); /* So we see what's up */ announce_cpu(cpu, apicid); @@ -798,6 +798,8 @@ do_rest: * the targeted processor. */ + printk(KERN_DEBUG "smpboot cpu %d: start_ip = %lx\n", cpu, start_ip); + atomic_set(&init_deasserted, 0); if (get_uv_system_type() != UV_NON_UNIQUE_APIC) { @@ -851,8 +853,8 @@ do_rest: pr_debug("CPU%d: has booted.\n", cpu); else { boot_error = 1; - if (*((volatile unsigned char *)trampoline_base) - == 0xA5) + if (*(volatile u32 *)TRAMPOLINE_SYM(trampoline_status) + == 0xA5A5A5A5) /* trampoline started but...? */ pr_err("CPU%d: Stuck ??\n", cpu); else @@ -878,7 +880,7 @@ do_rest: } /* mark "stuck" area as not stuck */ - *((volatile unsigned long *)trampoline_base) = 0; + *(volatile u32 *)TRAMPOLINE_SYM(trampoline_status) = 0; if (get_uv_system_type() != UV_NON_UNIQUE_APIC) { /* diff --git a/arch/x86/kernel/trampoline.c b/arch/x86/kernel/trampoline.c index a375616d77f..a91ae7709b4 100644 --- a/arch/x86/kernel/trampoline.c +++ b/arch/x86/kernel/trampoline.c @@ -2,39 +2,41 @@ #include #include +#include #include -#if defined(CONFIG_X86_64) && defined(CONFIG_ACPI_SLEEP) -#define __trampinit -#define __trampinitdata -#else -#define __trampinit __cpuinit -#define __trampinitdata __cpuinitdata -#endif +unsigned char *x86_trampoline_base; -/* ready for x86_64 and x86 */ -unsigned char *__trampinitdata trampoline_base; - -void __init reserve_trampoline_memory(void) +void __init setup_trampolines(void) { phys_addr_t mem; + size_t size = PAGE_ALIGN(x86_trampoline_end - x86_trampoline_start); /* Has to be in very low memory so we can execute real-mode AP code. */ - mem = memblock_find_in_range(0, 1<<20, TRAMPOLINE_SIZE, PAGE_SIZE); + mem = memblock_find_in_range(0, 1<<20, size, PAGE_SIZE); if (mem == MEMBLOCK_ERROR) panic("Cannot allocate trampoline\n"); - trampoline_base = __va(mem); - memblock_x86_reserve_range(mem, mem + TRAMPOLINE_SIZE, "TRAMPOLINE"); + x86_trampoline_base = __va(mem); + memblock_x86_reserve_range(mem, mem + size, "TRAMPOLINE"); + + printk(KERN_DEBUG "Base memory trampoline at [%p] %llx size %zu\n", + x86_trampoline_base, (unsigned long long)mem, size); + + memcpy(x86_trampoline_base, x86_trampoline_start, size); } /* - * Currently trivial. Write the real->protected mode - * bootstrap into the page concerned. The caller - * has made sure it's suitably aligned. + * setup_trampolines() gets called very early, to guarantee the + * availability of low memory. This is before the proper kernel page + * tables are set up, so we cannot set page permissions in that + * function. Thus, we use an arch_initcall instead. */ -unsigned long __trampinit setup_trampoline(void) +static int __init configure_trampolines(void) { - memcpy(trampoline_base, trampoline_data, TRAMPOLINE_SIZE); - return virt_to_phys(trampoline_base); + size_t size = PAGE_ALIGN(x86_trampoline_end - x86_trampoline_start); + + set_memory_x((unsigned long)x86_trampoline_base, size >> PAGE_SHIFT); + return 0; } +arch_initcall(configure_trampolines); diff --git a/arch/x86/kernel/trampoline_32.S b/arch/x86/kernel/trampoline_32.S index 8508237e8e4..451c0a7ef7f 100644 --- a/arch/x86/kernel/trampoline_32.S +++ b/arch/x86/kernel/trampoline_32.S @@ -32,9 +32,11 @@ #include #include -/* We can free up trampoline after bootup if cpu hotplug is not supported. */ -__CPUINITRODATA -.code16 +#ifdef CONFIG_SMP + + .section ".x86_trampoline","a" + .balign PAGE_SIZE + .code16 ENTRY(trampoline_data) r_base = . @@ -44,7 +46,7 @@ r_base = . cli # We should be safe anyway - movl $0xA5A5A5A5, trampoline_data - r_base + movl $0xA5A5A5A5, trampoline_status - r_base # write marker for master knows we're running /* GDT tables in non default location kernel can be beyond 16MB and @@ -72,5 +74,10 @@ boot_idt_descr: .word 0 # idt limit = 0 .long 0 # idt base = 0L +ENTRY(trampoline_status) + .long 0 + .globl trampoline_end trampoline_end: + +#endif /* CONFIG_SMP */ diff --git a/arch/x86/kernel/trampoline_64.S b/arch/x86/kernel/trampoline_64.S index 075d130efcf..49c77a68252 100644 --- a/arch/x86/kernel/trampoline_64.S +++ b/arch/x86/kernel/trampoline_64.S @@ -32,13 +32,9 @@ #include #include -#ifdef CONFIG_ACPI_SLEEP -.section .rodata, "a", @progbits -#else -/* We can free up the trampoline after bootup if cpu hotplug is not supported. */ -__CPUINITRODATA -#endif -.code16 + .section ".x86_trampoline","a" + .balign PAGE_SIZE + .code16 ENTRY(trampoline_data) r_base = . @@ -50,7 +46,7 @@ r_base = . mov %ax, %ss - movl $0xA5A5A5A5, trampoline_data - r_base + movl $0xA5A5A5A5, trampoline_status - r_base # write marker for master knows we're running # Setup stack @@ -64,10 +60,13 @@ r_base = . movzx %ax, %esi # Find the 32bit trampoline location shll $4, %esi - # Fixup the vectors - addl %esi, startup_32_vector - r_base - addl %esi, startup_64_vector - r_base - addl %esi, tgdt + 2 - r_base # Fixup the gdt pointer + # Fixup the absolute vectors + leal (startup_32 - r_base)(%esi), %eax + movl %eax, startup_32_vector - r_base + leal (startup_64 - r_base)(%esi), %eax + movl %eax, startup_64_vector - r_base + leal (tgdt - r_base)(%esi), %eax + movl %eax, (tgdt + 2 - r_base) /* * GDT tables in non default location kernel can be beyond 16MB and @@ -129,6 +128,7 @@ no_longmode: jmp no_longmode #include "verify_cpu.S" + .balign 4 # Careful these need to be in the same 64K segment as the above; tidt: .word 0 # idt limit = 0 @@ -156,6 +156,12 @@ startup_64_vector: .long startup_64 - r_base .word __KERNEL_CS, 0 + .balign 4 +fixup_base: + .long 0 +ENTRY(trampoline_status) + .long 0 + trampoline_stack: .org 0x1000 trampoline_stack_end: diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S index bf470075518..cb2c5069b01 100644 --- a/arch/x86/kernel/vmlinux.lds.S +++ b/arch/x86/kernel/vmlinux.lds.S @@ -240,6 +240,18 @@ SECTIONS INIT_DATA_SECTION(16) + /* + * Code and data for a variety of lowlevel trampolines, to be + * copied into base memory (< 1 MiB) during initialization. + * Since it is copied early, the main copy can be discarded + * afterwards. + */ + .x86_trampoline : AT(ADDR(.x86_trampoline) - LOAD_OFFSET) { + x86_trampoline_start = .; + *(.x86_trampoline) + x86_trampoline_end = .; + } + .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) { __x86_cpu_dev_start = .; *(.x86_cpu_dev.init) @@ -291,6 +303,7 @@ SECTIONS *(.iommu_table) __iommu_table_end = .; } + . = ALIGN(8); /* * .exit.text is discard at runtime, not link time, to deal with -- cgit v1.2.3-18-g5258 From d1ee433539ea5963a8f946f3428b335d1c5fdb20 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Mon, 14 Feb 2011 15:42:46 -0800 Subject: x86, trampoline: Use the unified trampoline setup for ACPI wakeup Use the unified trampoline allocation setup to allocate and install the ACPI wakeup code in low memory. Signed-off-by: H. Peter Anvin LKML-Reference: <4D5DFBE4.7090104@intel.com> Cc: Rafael J. Wysocki Cc: Matthieu Castet Cc: Stephen Rothwell --- arch/x86/include/asm/acpi.h | 4 +- arch/x86/include/asm/trampoline.h | 33 ++++++++++----- arch/x86/kernel/acpi/realmode/wakeup.S | 21 ++++++---- arch/x86/kernel/acpi/realmode/wakeup.h | 5 ++- arch/x86/kernel/acpi/realmode/wakeup.lds.S | 28 ++++++------- arch/x86/kernel/acpi/sleep.c | 65 ++++-------------------------- arch/x86/kernel/acpi/sleep.h | 3 -- arch/x86/kernel/acpi/wakeup_rm.S | 10 +++-- arch/x86/kernel/setup.c | 7 ---- 9 files changed, 68 insertions(+), 108 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h index 211ca3f7fd1..4784df504d2 100644 --- a/arch/x86/include/asm/acpi.h +++ b/arch/x86/include/asm/acpi.h @@ -29,6 +29,7 @@ #include #include #include +#include #define COMPILER_DEPENDENT_INT64 long long #define COMPILER_DEPENDENT_UINT64 unsigned long long @@ -116,7 +117,8 @@ static inline void acpi_disable_pci(void) extern int acpi_save_state_mem(void); extern void acpi_restore_state_mem(void); -extern unsigned long acpi_wakeup_address; +extern const unsigned char acpi_wakeup_code[]; +#define acpi_wakeup_address (__pa(TRAMPOLINE_SYM(acpi_wakeup_code))) /* early initialization routine */ extern void acpi_reserve_wakeup_memory(void); diff --git a/arch/x86/include/asm/trampoline.h b/arch/x86/include/asm/trampoline.h index f4500fb3b48..feca3118a73 100644 --- a/arch/x86/include/asm/trampoline.h +++ b/arch/x86/include/asm/trampoline.h @@ -3,25 +3,36 @@ #ifndef __ASSEMBLY__ -#ifdef CONFIG_X86_TRAMPOLINE +#include +#include + /* - * Trampoline 80x86 program as an array. + * Trampoline 80x86 program as an array. These are in the init rodata + * segment, but that's okay, because we only care about the relative + * addresses of the symbols. */ -extern const unsigned char trampoline_data []; -extern const unsigned char trampoline_end []; -extern unsigned char *trampoline_base; +extern const unsigned char x86_trampoline_start []; +extern const unsigned char x86_trampoline_end []; +extern unsigned char *x86_trampoline_base; extern unsigned long init_rsp; extern unsigned long initial_code; extern unsigned long initial_gs; -#define TRAMPOLINE_SIZE roundup(trampoline_end - trampoline_data, PAGE_SIZE) +extern void __init setup_trampolines(void); + +extern const unsigned char trampoline_data[]; +extern const unsigned char trampoline_status[]; + +#define TRAMPOLINE_SYM(x) \ + ((void *)(x86_trampoline_base + \ + ((const unsigned char *)(x) - x86_trampoline_start))) -extern unsigned long setup_trampoline(void); -extern void __init reserve_trampoline_memory(void); -#else -static inline void reserve_trampoline_memory(void) {} -#endif /* CONFIG_X86_TRAMPOLINE */ +/* Address of the SMP trampoline */ +static inline unsigned long trampoline_address(void) +{ + return virt_to_phys(TRAMPOLINE_SYM(trampoline_data)); +} #endif /* __ASSEMBLY__ */ diff --git a/arch/x86/kernel/acpi/realmode/wakeup.S b/arch/x86/kernel/acpi/realmode/wakeup.S index 28595d6df47..ead21b66311 100644 --- a/arch/x86/kernel/acpi/realmode/wakeup.S +++ b/arch/x86/kernel/acpi/realmode/wakeup.S @@ -6,11 +6,17 @@ #include #include #include +#include "wakeup.h" .code16 - .section ".header", "a" + .section ".jump", "ax" + .globl _start +_start: + cli + jmp wakeup_code /* This should match the structure in wakeup.h */ + .section ".header", "a" .globl wakeup_header wakeup_header: video_mode: .short 0 /* Video mode number */ @@ -30,14 +36,11 @@ wakeup_jmp: .byte 0xea /* ljmpw */ wakeup_jmp_off: .word 3f wakeup_jmp_seg: .word 0 wakeup_gdt: .quad 0, 0, 0 -signature: .long 0x51ee1111 +signature: .long WAKEUP_HEADER_SIGNATURE .text - .globl _start .code16 wakeup_code: -_start: - cli cld /* Apparently some dimwit BIOS programmers don't know how to @@ -77,12 +80,12 @@ _start: /* Check header signature... */ movl signature, %eax - cmpl $0x51ee1111, %eax + cmpl $WAKEUP_HEADER_SIGNATURE, %eax jne bogus_real_magic /* Check we really have everything... */ movl end_signature, %eax - cmpl $0x65a22c82, %eax + cmpl $WAKEUP_END_SIGNATURE, %eax jne bogus_real_magic /* Call the C code */ @@ -147,3 +150,7 @@ wakeup_heap: wakeup_stack: .space 2048 wakeup_stack_end: + + .section ".signature","a" +end_signature: + .long WAKEUP_END_SIGNATURE diff --git a/arch/x86/kernel/acpi/realmode/wakeup.h b/arch/x86/kernel/acpi/realmode/wakeup.h index 69d38d0b2b6..e1828c07e79 100644 --- a/arch/x86/kernel/acpi/realmode/wakeup.h +++ b/arch/x86/kernel/acpi/realmode/wakeup.h @@ -35,7 +35,8 @@ struct wakeup_header { extern struct wakeup_header wakeup_header; #endif -#define HEADER_OFFSET 0x3f00 -#define WAKEUP_SIZE 0x4000 +#define WAKEUP_HEADER_OFFSET 8 +#define WAKEUP_HEADER_SIGNATURE 0x51ee1111 +#define WAKEUP_END_SIGNATURE 0x65a22c82 #endif /* ARCH_X86_KERNEL_ACPI_RM_WAKEUP_H */ diff --git a/arch/x86/kernel/acpi/realmode/wakeup.lds.S b/arch/x86/kernel/acpi/realmode/wakeup.lds.S index 060fff8f5c5..d4f8010a5b1 100644 --- a/arch/x86/kernel/acpi/realmode/wakeup.lds.S +++ b/arch/x86/kernel/acpi/realmode/wakeup.lds.S @@ -13,9 +13,19 @@ ENTRY(_start) SECTIONS { . = 0; + .jump : { + *(.jump) + } = 0x90909090 + + . = WAKEUP_HEADER_OFFSET; + .header : { + *(.header) + } + + . = ALIGN(16); .text : { *(.text*) - } + } = 0x90909090 . = ALIGN(16); .rodata : { @@ -33,11 +43,6 @@ SECTIONS *(.data*) } - .signature : { - end_signature = .; - LONG(0x65a22c82) - } - . = ALIGN(16); .bss : { __bss_start = .; @@ -45,20 +50,13 @@ SECTIONS __bss_end = .; } - . = HEADER_OFFSET; - .header : { - *(.header) + .signature : { + *(.signature) } - . = ALIGN(16); _end = .; /DISCARD/ : { *(.note*) } - - /* - * The ASSERT() sink to . is intentional, for binutils 2.14 compatibility: - */ - . = ASSERT(_end <= WAKEUP_SIZE, "Wakeup too big!"); } diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index 68d1537b8c8..4572c58e66d 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -18,12 +18,8 @@ #include "realmode/wakeup.h" #include "sleep.h" -unsigned long acpi_wakeup_address; unsigned long acpi_realmode_flags; -/* address in low memory of the wakeup routine. */ -static unsigned long acpi_realmode; - #if defined(CONFIG_SMP) && defined(CONFIG_64BIT) static char temp_stack[4096]; #endif @@ -33,22 +29,17 @@ static char temp_stack[4096]; * * Create an identity mapped page table and copy the wakeup routine to * low memory. - * - * Note that this is too late to change acpi_wakeup_address. */ int acpi_save_state_mem(void) { struct wakeup_header *header; + /* address in low memory of the wakeup routine. */ + char *acpi_realmode; - if (!acpi_realmode) { - printk(KERN_ERR "Could not allocate memory during boot, " - "S3 disabled\n"); - return -ENOMEM; - } - memcpy((void *)acpi_realmode, &wakeup_code_start, WAKEUP_SIZE); + acpi_realmode = TRAMPOLINE_SYM(acpi_wakeup_code); - header = (struct wakeup_header *)(acpi_realmode + HEADER_OFFSET); - if (header->signature != 0x51ee1111) { + header = (struct wakeup_header *)(acpi_realmode + WAKEUP_HEADER_OFFSET); + if (header->signature != WAKEUP_HEADER_SIGNATURE) { printk(KERN_ERR "wakeup header does not match\n"); return -EINVAL; } @@ -68,9 +59,7 @@ int acpi_save_state_mem(void) /* GDT[0]: GDT self-pointer */ header->wakeup_gdt[0] = (u64)(sizeof(header->wakeup_gdt) - 1) + - ((u64)(acpi_wakeup_address + - ((char *)&header->wakeup_gdt - (char *)acpi_realmode)) - << 16); + ((u64)__pa(&header->wakeup_gdt) << 16); /* GDT[1]: big real mode-like code segment */ header->wakeup_gdt[1] = GDT_ENTRY(0x809b, acpi_wakeup_address, 0xfffff); @@ -96,7 +85,7 @@ int acpi_save_state_mem(void) header->pmode_cr3 = (u32)__pa(&initial_page_table); saved_magic = 0x12345678; #else /* CONFIG_64BIT */ - header->trampoline_segment = setup_trampoline() >> 4; + header->trampoline_segment = trampoline_address() >> 4; #ifdef CONFIG_SMP stack_start = (unsigned long)temp_stack + sizeof(temp_stack); early_gdt_descr.address = @@ -117,46 +106,6 @@ void acpi_restore_state_mem(void) { } - -/** - * acpi_reserve_wakeup_memory - do _very_ early ACPI initialisation - * - * We allocate a page from the first 1MB of memory for the wakeup - * routine for when we come back from a sleep state. The - * runtime allocator allows specification of <16MB pages, but not - * <1MB pages. - */ -void __init acpi_reserve_wakeup_memory(void) -{ - phys_addr_t mem; - - if ((&wakeup_code_end - &wakeup_code_start) > WAKEUP_SIZE) { - printk(KERN_ERR - "ACPI: Wakeup code way too big, S3 disabled.\n"); - return; - } - - mem = memblock_find_in_range(0, 1<<20, WAKEUP_SIZE, PAGE_SIZE); - - if (mem == MEMBLOCK_ERROR) { - printk(KERN_ERR "ACPI: Cannot allocate lowmem, S3 disabled.\n"); - return; - } - acpi_realmode = (unsigned long) phys_to_virt(mem); - acpi_wakeup_address = mem; - memblock_x86_reserve_range(mem, mem + WAKEUP_SIZE, "ACPI WAKEUP"); -} - -int __init acpi_configure_wakeup_memory(void) -{ - if (acpi_realmode) - set_memory_x(acpi_realmode, WAKEUP_SIZE >> PAGE_SHIFT); - - return 0; -} -arch_initcall(acpi_configure_wakeup_memory); - - static int __init acpi_sleep_setup(char *str) { while ((str != NULL) && (*str != '\0')) { diff --git a/arch/x86/kernel/acpi/sleep.h b/arch/x86/kernel/acpi/sleep.h index adbcbaa6f1d..86ba1c87165 100644 --- a/arch/x86/kernel/acpi/sleep.h +++ b/arch/x86/kernel/acpi/sleep.h @@ -4,13 +4,10 @@ #include -extern char wakeup_code_start, wakeup_code_end; - extern unsigned long saved_video_mode; extern long saved_magic; extern int wakeup_pmode_return; -extern char swsusp_pg_dir[PAGE_SIZE]; extern unsigned long acpi_copy_wakeup_routine(unsigned long); extern void wakeup_long64(void); diff --git a/arch/x86/kernel/acpi/wakeup_rm.S b/arch/x86/kernel/acpi/wakeup_rm.S index 6ff3b573057..6ce81ee9cb0 100644 --- a/arch/x86/kernel/acpi/wakeup_rm.S +++ b/arch/x86/kernel/acpi/wakeup_rm.S @@ -2,9 +2,11 @@ * Wrapper script for the realmode binary as a transport object * before copying to low memory. */ - .section ".rodata","a" - .globl wakeup_code_start, wakeup_code_end -wakeup_code_start: +#include + + .section ".x86_trampoline","a" + .balign PAGE_SIZE + .globl acpi_wakeup_code +acpi_wakeup_code: .incbin "arch/x86/kernel/acpi/realmode/wakeup.bin" -wakeup_code_end: .size wakeup_code_start, .-wakeup_code_start diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 994ea20e177..a089fc19ffa 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -937,13 +937,6 @@ void __init setup_arch(char **cmdline_p) setup_trampolines(); -#ifdef CONFIG_ACPI_SLEEP - /* - * Reserve low memory region for sleep support. - * even before init_memory_mapping - */ - acpi_reserve_wakeup_memory(); -#endif init_gbpages(); /* max_pfn_mapped is updated here */ -- cgit v1.2.3-18-g5258 From 014eea518af3d141e276664cf40ef3da899eba35 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Mon, 14 Feb 2011 18:33:55 -0800 Subject: x86: Make the GDT_ENTRY() macro in safe for assembly Make the GDT_ENTRY() macro in safe for use in assembly code by guarding the ULL suffixes with _AC() macros. Signed-off-by: H. Peter Anvin LKML-Reference: <4D5DFBE4.7090104@intel.com> Cc: Rafael J. Wysocki Cc: Matthieu Castet Cc: Stephen Rothwell --- arch/x86/include/asm/segment.h | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/segment.h b/arch/x86/include/asm/segment.h index 231f1c1d660..cd84f7208f7 100644 --- a/arch/x86/include/asm/segment.h +++ b/arch/x86/include/asm/segment.h @@ -1,14 +1,16 @@ #ifndef _ASM_X86_SEGMENT_H #define _ASM_X86_SEGMENT_H +#include + /* Constructor for a conventional segment GDT (or LDT) entry */ /* This is a macro so it can be used in initializers */ #define GDT_ENTRY(flags, base, limit) \ - ((((base) & 0xff000000ULL) << (56-24)) | \ - (((flags) & 0x0000f0ffULL) << 40) | \ - (((limit) & 0x000f0000ULL) << (48-16)) | \ - (((base) & 0x00ffffffULL) << 16) | \ - (((limit) & 0x0000ffffULL))) + ((((base) & _AC(0xff000000,ULL)) << (56-24)) | \ + (((flags) & _AC(0x0000f0ff,ULL)) << 40) | \ + (((limit) & _AC(0x000f0000,ULL)) << (48-16)) | \ + (((base) & _AC(0x00ffffff,ULL)) << 16) | \ + (((limit) & _AC(0x0000ffff,ULL)))) /* Simple and small GDT entries for booting only */ -- cgit v1.2.3-18-g5258 From 3d35ac346e981162eeba391e496faceed4753e7b Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Mon, 14 Feb 2011 18:36:03 -0800 Subject: x86, reboot: Move the real-mode reboot code to an assembly file Move the real-mode reboot code out to an assembly file (reboot_32.S) which is allocated using the common lowmem trampoline allocator. Signed-off-by: H. Peter Anvin LKML-Reference: <4D5DFBE4.7090104@intel.com> Cc: Stephen Rothwell Cc: Rafael J. Wysocki Cc: Matthieu Castet --- arch/x86/include/asm/reboot.h | 5 +- arch/x86/kernel/Makefile | 1 + arch/x86/kernel/apm_32.c | 12 +--- arch/x86/kernel/reboot.c | 120 ++++++++------------------------------ arch/x86/kernel/reboot_32.S | 131 ++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 162 insertions(+), 107 deletions(-) create mode 100644 arch/x86/kernel/reboot_32.S (limited to 'arch') diff --git a/arch/x86/include/asm/reboot.h b/arch/x86/include/asm/reboot.h index 562d4fd31ba..3250e3d605d 100644 --- a/arch/x86/include/asm/reboot.h +++ b/arch/x86/include/asm/reboot.h @@ -18,7 +18,10 @@ extern struct machine_ops machine_ops; void native_machine_crash_shutdown(struct pt_regs *regs); void native_machine_shutdown(void); -void machine_real_restart(const unsigned char *code, int length); +void machine_real_restart(unsigned int type); +/* These must match dispatch_table in reboot_32.S */ +#define MRR_BIOS 0 +#define MRR_APM 1 typedef void (*nmi_shootdown_cb)(int, struct die_args*); void nmi_shootdown_cpus(nmi_shootdown_cb callback); diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 2e8ce0deae4..778c5b93676 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -59,6 +59,7 @@ obj-$(CONFIG_STACKTRACE) += stacktrace.o obj-y += cpu/ obj-y += acpi/ obj-y += reboot.o +obj-$(CONFIG_X86_32) += reboot_32.o obj-$(CONFIG_MCA) += mca_32.o obj-$(CONFIG_X86_MSR) += msr.o obj-$(CONFIG_X86_CPUID) += cpuid.o diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c index 0e4f24c2a74..b929108eb58 100644 --- a/arch/x86/kernel/apm_32.c +++ b/arch/x86/kernel/apm_32.c @@ -975,20 +975,10 @@ recalc: static void apm_power_off(void) { - unsigned char po_bios_call[] = { - 0xb8, 0x00, 0x10, /* movw $0x1000,ax */ - 0x8e, 0xd0, /* movw ax,ss */ - 0xbc, 0x00, 0xf0, /* movw $0xf000,sp */ - 0xb8, 0x07, 0x53, /* movw $0x5307,ax */ - 0xbb, 0x01, 0x00, /* movw $0x0001,bx */ - 0xb9, 0x03, 0x00, /* movw $0x0003,cx */ - 0xcd, 0x15 /* int $0x15 */ - }; - /* Some bioses don't like being called from CPU != 0 */ if (apm_info.realmode_power_off) { set_cpus_allowed_ptr(current, cpumask_of(0)); - machine_real_restart(po_bios_call, sizeof(po_bios_call)); + machine_real_restart(MRR_APM); } else { (void)set_system_power_state(APM_STATE_OFF); } diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index fc7aae1e2bc..10c6619c054 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -295,68 +295,16 @@ static int __init reboot_init(void) } core_initcall(reboot_init); -/* The following code and data reboots the machine by switching to real - mode and jumping to the BIOS reset entry point, as if the CPU has - really been reset. The previous version asked the keyboard - controller to pulse the CPU reset line, which is more thorough, but - doesn't work with at least one type of 486 motherboard. It is easy - to stop this code working; hence the copious comments. */ -static const unsigned long long -real_mode_gdt_entries [3] = -{ - 0x0000000000000000ULL, /* Null descriptor */ - 0x00009b000000ffffULL, /* 16-bit real-mode 64k code at 0x00000000 */ - 0x000093000100ffffULL /* 16-bit real-mode 64k data at 0x00000100 */ -}; +extern const unsigned char machine_real_restart_asm[]; +extern const u64 machine_real_restart_gdt[3]; -static const struct desc_ptr -real_mode_gdt = { sizeof (real_mode_gdt_entries) - 1, (long)real_mode_gdt_entries }, -real_mode_idt = { 0x3ff, 0 }; - -/* This is 16-bit protected mode code to disable paging and the cache, - switch to real mode and jump to the BIOS reset code. - - The instruction that switches to real mode by writing to CR0 must be - followed immediately by a far jump instruction, which set CS to a - valid value for real mode, and flushes the prefetch queue to avoid - running instructions that have already been decoded in protected - mode. - - Clears all the flags except ET, especially PG (paging), PE - (protected-mode enable) and TS (task switch for coprocessor state - save). Flushes the TLB after paging has been disabled. Sets CD and - NW, to disable the cache on a 486, and invalidates the cache. This - is more like the state of a 486 after reset. I don't know if - something else should be done for other chips. - - More could be done here to set up the registers as if a CPU reset had - occurred; hopefully real BIOSs don't assume much. */ -static const unsigned char real_mode_switch [] = -{ - 0x66, 0x0f, 0x20, 0xc0, /* movl %cr0,%eax */ - 0x66, 0x83, 0xe0, 0x11, /* andl $0x00000011,%eax */ - 0x66, 0x0d, 0x00, 0x00, 0x00, 0x60, /* orl $0x60000000,%eax */ - 0x66, 0x0f, 0x22, 0xc0, /* movl %eax,%cr0 */ - 0x66, 0x0f, 0x22, 0xd8, /* movl %eax,%cr3 */ - 0x66, 0x0f, 0x20, 0xc3, /* movl %cr0,%ebx */ - 0x66, 0x81, 0xe3, 0x00, 0x00, 0x00, 0x60, /* andl $0x60000000,%ebx */ - 0x74, 0x02, /* jz f */ - 0x0f, 0x09, /* wbinvd */ - 0x24, 0x10, /* f: andb $0x10,al */ - 0x66, 0x0f, 0x22, 0xc0 /* movl %eax,%cr0 */ -}; -static const unsigned char jump_to_bios [] = +void machine_real_restart(unsigned int type) { - 0xea, 0x00, 0x00, 0xff, 0xff /* ljmp $0xffff,$0x0000 */ -}; + void *restart_va; + unsigned long restart_pa; + void (*restart_lowmem)(unsigned int); + u64 *lowmem_gdt; -/* - * Switch to real mode and then execute the code - * specified by the code and length parameters. - * We assume that length will aways be less that 100! - */ -void machine_real_restart(const unsigned char *code, int length) -{ local_irq_disable(); /* Write zero to CMOS register number 0x0f, which the BIOS POST @@ -384,41 +332,23 @@ void machine_real_restart(const unsigned char *code, int length) too. */ *((unsigned short *)0x472) = reboot_mode; - /* For the switch to real mode, copy some code to low memory. It has - to be in the first 64k because it is running in 16-bit mode, and it - has to have the same physical and virtual address, because it turns - off paging. Copy it near the end of the first page, out of the way - of BIOS variables. */ - memcpy((void *)(0x1000 - sizeof(real_mode_switch) - 100), - real_mode_switch, sizeof (real_mode_switch)); - memcpy((void *)(0x1000 - 100), code, length); - - /* Set up the IDT for real mode. */ - load_idt(&real_mode_idt); - - /* Set up a GDT from which we can load segment descriptors for real - mode. The GDT is not used in real mode; it is just needed here to - prepare the descriptors. */ - load_gdt(&real_mode_gdt); - - /* Load the data segment registers, and thus the descriptors ready for - real mode. The base address of each segment is 0x100, 16 times the - selector value being loaded here. This is so that the segment - registers don't have to be reloaded after switching to real mode: - the values are consistent for real mode operation already. */ - __asm__ __volatile__ ("movl $0x0010,%%eax\n" - "\tmovl %%eax,%%ds\n" - "\tmovl %%eax,%%es\n" - "\tmovl %%eax,%%fs\n" - "\tmovl %%eax,%%gs\n" - "\tmovl %%eax,%%ss" : : : "eax"); - - /* Jump to the 16-bit code that we copied earlier. It disables paging - and the cache, switches to real mode, and jumps to the BIOS reset - entry point. */ - __asm__ __volatile__ ("ljmp $0x0008,%0" - : - : "i" ((void *)(0x1000 - sizeof (real_mode_switch) - 100))); + /* Patch the GDT in the low memory trampoline */ + lowmem_gdt = TRAMPOLINE_SYM(machine_real_restart_gdt); + + restart_va = TRAMPOLINE_SYM(machine_real_restart_asm); + restart_pa = virt_to_phys(restart_va); + restart_lowmem = (void (*)(unsigned int))restart_pa; + + /* GDT[0]: GDT self-pointer */ + lowmem_gdt[0] = + (u64)(sizeof(machine_real_restart_gdt) - 1) + + ((u64)virt_to_phys(lowmem_gdt) << 16); + /* GDT[1]: 64K real mode code segment */ + lowmem_gdt[1] = + GDT_ENTRY(0x009b, restart_pa, 0xffff); + + /* Jump to the identity-mapped low memory code */ + restart_lowmem(type); } #ifdef CONFIG_APM_MODULE EXPORT_SYMBOL(machine_real_restart); @@ -573,7 +503,7 @@ static void native_machine_emergency_restart(void) #ifdef CONFIG_X86_32 case BOOT_BIOS: - machine_real_restart(jump_to_bios, sizeof(jump_to_bios)); + machine_real_restart(MRR_BIOS); reboot_type = BOOT_KBD; break; diff --git a/arch/x86/kernel/reboot_32.S b/arch/x86/kernel/reboot_32.S new file mode 100644 index 00000000000..f242356a096 --- /dev/null +++ b/arch/x86/kernel/reboot_32.S @@ -0,0 +1,131 @@ +#include +#include +#include +#include + +/* + * The following code and data reboots the machine by switching to real + * mode and jumping to the BIOS reset entry point, as if the CPU has + * really been reset. The previous version asked the keyboard + * controller to pulse the CPU reset line, which is more thorough, but + * doesn't work with at least one type of 486 motherboard. It is easy + * to stop this code working; hence the copious comments. + * + * This code is called with the restart type (0 = BIOS, 1 = APM) in %eax. + */ + .section ".x86_trampoline","a" + .balign 16 + .code32 +ENTRY(machine_real_restart_asm) +r_base = . + /* Get our own relocated address */ + call 1f +1: popl %ebx + subl $1b, %ebx + + /* Patch post-real-mode segment jump */ + movw dispatch_table(%ebx,%ecx,2),%cx + movw %cx, 101f(%ebx) + movw %ax, 102f(%ebx) + + /* Set up the IDT for real mode. */ + lidtl machine_real_restart_idt(%ebx) + + /* + * Set up a GDT from which we can load segment descriptors for real + * mode. The GDT is not used in real mode; it is just needed here to + * prepare the descriptors. + */ + lgdtl machine_real_restart_gdt(%ebx) + + /* + * Load the data segment registers with 16-bit compatible values + */ + movl $16, %ecx + movl %ecx, %ds + movl %ecx, %es + movl %ecx, %fs + movl %ecx, %gs + movl %ecx, %ss + ljmpl $8, $1f - r_base + +/* + * This is 16-bit protected mode code to disable paging and the cache, + * switch to real mode and jump to the BIOS reset code. + * + * The instruction that switches to real mode by writing to CR0 must be + * followed immediately by a far jump instruction, which set CS to a + * valid value for real mode, and flushes the prefetch queue to avoid + * running instructions that have already been decoded in protected + * mode. + * + * Clears all the flags except ET, especially PG (paging), PE + * (protected-mode enable) and TS (task switch for coprocessor state + * save). Flushes the TLB after paging has been disabled. Sets CD and + * NW, to disable the cache on a 486, and invalidates the cache. This + * is more like the state of a 486 after reset. I don't know if + * something else should be done for other chips. + * + * More could be done here to set up the registers as if a CPU reset had + * occurred; hopefully real BIOSs don't assume much. This is not the + * actual BIOS entry point, anyway (that is at 0xfffffff0). + * + * Most of this work is probably excessive, but it is what is tested. + */ + .code16 +1: + xorl %ecx, %ecx + movl %cr0, %eax + andl $0x00000011, %eax + orl $0x60000000, %eax + movl %eax, %cr0 + movl %ecx, %cr3 + movl %cr0, %edx + andl $0x60000000, %edx /* If no cache bits -> no wbinvd */ + jz 2f + wbinvd +2: + andb $0x10, %al + movl %eax, %cr0 + .byte 0xea /* ljmpw */ +101: .word 0 /* Offset */ +102: .word 0 /* Segment */ + +bios: + ljmpw $0xf000, $0xfff0 + +apm: + movw $0x1000, %ax + movw %ax, %ss + movw $0xf000, %sp + movw $0x5307, %ax + movw $0x0001, %bx + movw $0x0003, %cx + int $0x15 + +END(machine_real_restart_asm) + + .balign 16 + /* These must match Date: Thu, 17 Feb 2011 15:47:37 +0000 Subject: x86: Don't call dump_stack() from arch_trigger_all_cpu_backtrace_handler() show_regs() already prints two(!) stack traces, no need for a third one. Signed-off-by: Jan Beulich LKML-Reference: <4D5D512902000078000326EE@vpn.id2.novell.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/hw_nmi.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/hw_nmi.c b/arch/x86/kernel/apic/hw_nmi.c index 79fd43ca6f9..c4e557a1ebb 100644 --- a/arch/x86/kernel/apic/hw_nmi.c +++ b/arch/x86/kernel/apic/hw_nmi.c @@ -83,7 +83,6 @@ arch_trigger_all_cpu_backtrace_handler(struct notifier_block *self, arch_spin_lock(&lock); printk(KERN_WARNING "NMI backtrace for cpu %d\n", cpu); show_regs(regs); - dump_stack(); arch_spin_unlock(&lock); cpumask_clear_cpu(cpu, to_cpumask(backtrace_mask)); return NOTIFY_STOP; -- cgit v1.2.3-18-g5258 From fd8fa4d3ddc4cc04ec8097e632b995d535c52beb Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 17 Feb 2011 15:56:58 +0000 Subject: x86: Combine printk()s in show_regs_common() Printing a single character alone when there's an immediately following printk() is pretty pointless (and wasteful). Signed-off-by: Jan Beulich LKML-Reference: <4D5D535A0200007800032730@vpn.id2.novell.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/process.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index ff455419898..99fa3adf014 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -110,12 +110,9 @@ void show_regs_common(void) init_utsname()->release, (int)strcspn(init_utsname()->version, " "), init_utsname()->version); - printk(KERN_CONT " "); - printk(KERN_CONT "%s %s", vendor, product); - if (board) { - printk(KERN_CONT "/"); - printk(KERN_CONT "%s", board); - } + printk(KERN_CONT " %s %s", vendor, product); + if (board) + printk(KERN_CONT "/%s", board); printk(KERN_CONT "\n"); } -- cgit v1.2.3-18-g5258 From 02ca752e4181e219e243cd61a60dd1da47251f11 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 17 Feb 2011 15:51:40 +0000 Subject: x86: Remove die_nmi() With no caller left, the function and the DIE_NMIWATCHDOG enumerator can both go away. Signed-off-by: Jan Beulich Cc: Peter Zijlstra Cc: Don Zickus LKML-Reference: <4D5D521C0200007800032702@vpn.id2.novell.com> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/kdebug.h | 1 - arch/x86/include/asm/nmi.h | 1 - arch/x86/kernel/dumpstack.c | 25 ------------------------- arch/x86/kernel/kgdb.c | 9 --------- 4 files changed, 36 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/kdebug.h b/arch/x86/include/asm/kdebug.h index ca242d35e87..518bbbb9ee5 100644 --- a/arch/x86/include/asm/kdebug.h +++ b/arch/x86/include/asm/kdebug.h @@ -13,7 +13,6 @@ enum die_val { DIE_PANIC, DIE_NMI, DIE_DIE, - DIE_NMIWATCHDOG, DIE_KERNELDEBUG, DIE_TRAP, DIE_GPF, diff --git a/arch/x86/include/asm/nmi.h b/arch/x86/include/asm/nmi.h index c76f5b92b84..07f46016d3f 100644 --- a/arch/x86/include/asm/nmi.h +++ b/arch/x86/include/asm/nmi.h @@ -7,7 +7,6 @@ #ifdef CONFIG_X86_LOCAL_APIC -extern void die_nmi(char *str, struct pt_regs *regs, int do_panic); extern int avail_to_resrv_perfctr_nmi_bit(unsigned int); extern int reserve_perfctr_nmi(unsigned int); extern void release_perfctr_nmi(unsigned int); diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c index df20723a6a1..220a1c11cfd 100644 --- a/arch/x86/kernel/dumpstack.c +++ b/arch/x86/kernel/dumpstack.c @@ -320,31 +320,6 @@ void die(const char *str, struct pt_regs *regs, long err) oops_end(flags, regs, sig); } -void notrace __kprobes -die_nmi(char *str, struct pt_regs *regs, int do_panic) -{ - unsigned long flags; - - if (notify_die(DIE_NMIWATCHDOG, str, regs, 0, 2, SIGINT) == NOTIFY_STOP) - return; - - /* - * We are in trouble anyway, lets at least try - * to get a message out. - */ - flags = oops_begin(); - printk(KERN_EMERG "%s", str); - printk(" on CPU%d, ip %08lx, registers:\n", - smp_processor_id(), regs->ip); - show_registers(regs); - oops_end(flags, regs, 0); - if (do_panic || panic_on_oops) - panic("Non maskable interrupt"); - nmi_exit(); - local_irq_enable(); - do_exit(SIGBUS); -} - static int __init oops_setup(char *s) { if (!s) diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c index a4130005028..7c64c420a9f 100644 --- a/arch/x86/kernel/kgdb.c +++ b/arch/x86/kernel/kgdb.c @@ -533,15 +533,6 @@ static int __kgdb_notify(struct die_args *args, unsigned long cmd) } return NOTIFY_DONE; - case DIE_NMIWATCHDOG: - if (atomic_read(&kgdb_active) != -1) { - /* KGDB CPU roundup: */ - kgdb_nmicallback(raw_smp_processor_id(), regs); - return NOTIFY_STOP; - } - /* Enter debugger: */ - break; - case DIE_DEBUG: if (atomic_read(&kgdb_cpu_doing_single_step) != -1) { if (user_mode(regs)) -- cgit v1.2.3-18-g5258 From 58bff947e2d164c7e5cbf7f485e4b3d4884befeb Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 17 Feb 2011 15:54:26 +0000 Subject: x86: Eliminate pointless adjustment attempts in fixup_irqs() Not only when an IRQ's affinity equals cpu_online_mask is there no need to actually try to adjust the affinity, but also when it's a subset thereof. This particularly avoids adjustment attempts during system shutdown to any IRQs bound to CPU#0. Signed-off-by: Jan Beulich Cc: Thomas Gleixner Cc: Eric W. Biederman Cc: Suresh Siddha Cc: Gary Hade LKML-Reference: <4D5D52C2020000780003272C@vpn.id2.novell.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c index 387b6a0c9e8..78793efd318 100644 --- a/arch/x86/kernel/irq.c +++ b/arch/x86/kernel/irq.c @@ -310,7 +310,7 @@ void fixup_irqs(void) data = &desc->irq_data; affinity = data->affinity; if (!irq_has_action(irq) || - cpumask_equal(affinity, cpu_online_mask)) { + cpumask_subset(affinity, cpu_online_mask)) { raw_spin_unlock(&desc->lock); continue; } -- cgit v1.2.3-18-g5258 From 9613afc36a3114b776d7b09877060062cd3e4d89 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 18 Feb 2011 17:36:06 +0900 Subject: ARM: SAMSUNG: Drop exporting s3c24xx_ts_set_platdata s3c24xx_ts_set_platdata is annotated __init and not used by any module, thus don't export it. This patch fixes below warning: WARNING: arch/arm/plat-samsung/built-in.o(__ksymtab+0x90): Section mismatch in reference from the variable __ksymtab_s3c24xx_ts_set_platdata to the function .init.text:s3c24xx_ts_set_platdata() The symbol s3c24xx_ts_set_platdata is exported and annotated __init Fix this by removing the __init annotation of s3c24xx_ts_set_platdata or drop the export. Signed-off-by: Axel Lin Signed-off-by: Kukjin Kim --- arch/arm/plat-samsung/dev-ts.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-samsung/dev-ts.c b/arch/arm/plat-samsung/dev-ts.c index 236ef8427d7..3e4bd8147bf 100644 --- a/arch/arm/plat-samsung/dev-ts.c +++ b/arch/arm/plat-samsung/dev-ts.c @@ -58,4 +58,3 @@ void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd) s3c_device_ts.dev.platform_data = npd; } -EXPORT_SYMBOL(s3c24xx_ts_set_platdata); -- cgit v1.2.3-18-g5258 From 979f395d2b5be82246e35c9f7fc2b977a2f2a45b Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Fri, 18 Feb 2011 17:47:34 +0900 Subject: ARM: S5PV210: Update max8998_platform_data Max8998 PMIC driver's platform data has been changed once again in commit 735a3d9efdc. This patch fixes build break caused by that commit. Signed-off-by: Marek Szyprowski Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pv210/mach-aquila.c | 9 ++++++--- arch/arm/mach-s5pv210/mach-goni.c | 9 ++++++--- 2 files changed, 12 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index 461aa035afc..1236e19a7a4 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -381,9 +381,12 @@ static struct max8998_platform_data aquila_max8998_pdata = { .buck1_set1 = S5PV210_GPH0(3), .buck1_set2 = S5PV210_GPH0(4), .buck2_set3 = S5PV210_GPH0(5), - .buck1_max_voltage1 = 1200000, - .buck1_max_voltage2 = 1200000, - .buck2_max_voltage = 1200000, + .buck1_voltage1 = 1200000, + .buck1_voltage2 = 1200000, + .buck1_voltage3 = 1200000, + .buck1_voltage4 = 1200000, + .buck2_voltage1 = 1200000, + .buck2_voltage2 = 1200000, }; #endif diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index e22d5112fd4..2beeb667216 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -521,9 +521,12 @@ static struct max8998_platform_data goni_max8998_pdata = { .buck1_set1 = S5PV210_GPH0(3), .buck1_set2 = S5PV210_GPH0(4), .buck2_set3 = S5PV210_GPH0(5), - .buck1_max_voltage1 = 1200000, - .buck1_max_voltage2 = 1200000, - .buck2_max_voltage = 1200000, + .buck1_voltage1 = 1200000, + .buck1_voltage2 = 1200000, + .buck1_voltage3 = 1200000, + .buck1_voltage4 = 1200000, + .buck2_voltage1 = 1200000, + .buck2_voltage2 = 1200000, }; #endif -- cgit v1.2.3-18-g5258 From d1061331b72e2e1420187e4684740b4a481c73a4 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Fri, 18 Feb 2011 17:51:43 +0900 Subject: ARM: S5PV210: Fix regulator names Since commit 1130e5b3ff4 regulators are exported to debugfs. The names of the regulators that contains slash ('/') causes an ops during kernel boot. This patch fixes this issue. Signed-off-by: Marek Szyprowski Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pv210/mach-aquila.c | 6 +++--- arch/arm/mach-s5pv210/mach-goni.c | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index 1236e19a7a4..557add4fc56 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -149,7 +149,7 @@ static struct regulator_init_data aquila_ldo2_data = { static struct regulator_init_data aquila_ldo3_data = { .constraints = { - .name = "VUSB/MIPI_1.1V", + .name = "VUSB+MIPI_1.1V", .min_uV = 1100000, .max_uV = 1100000, .apply_uV = 1, @@ -197,7 +197,7 @@ static struct regulator_init_data aquila_ldo7_data = { static struct regulator_init_data aquila_ldo8_data = { .constraints = { - .name = "VUSB/VADC_3.3V", + .name = "VUSB+VADC_3.3V", .min_uV = 3300000, .max_uV = 3300000, .apply_uV = 1, @@ -207,7 +207,7 @@ static struct regulator_init_data aquila_ldo8_data = { static struct regulator_init_data aquila_ldo9_data = { .constraints = { - .name = "VCC/VCAM_2.8V", + .name = "VCC+VCAM_2.8V", .min_uV = 2800000, .max_uV = 2800000, .apply_uV = 1, diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index 2beeb667216..056f5c769b0 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -288,7 +288,7 @@ static struct regulator_init_data goni_ldo2_data = { static struct regulator_init_data goni_ldo3_data = { .constraints = { - .name = "VUSB/MIPI_1.1V", + .name = "VUSB+MIPI_1.1V", .min_uV = 1100000, .max_uV = 1100000, .apply_uV = 1, @@ -337,7 +337,7 @@ static struct regulator_init_data goni_ldo7_data = { static struct regulator_init_data goni_ldo8_data = { .constraints = { - .name = "VUSB/VADC_3.3V", + .name = "VUSB+VADC_3.3V", .min_uV = 3300000, .max_uV = 3300000, .apply_uV = 1, @@ -347,7 +347,7 @@ static struct regulator_init_data goni_ldo8_data = { static struct regulator_init_data goni_ldo9_data = { .constraints = { - .name = "VCC/VCAM_2.8V", + .name = "VCC+VCAM_2.8V", .min_uV = 2800000, .max_uV = 2800000, .apply_uV = 1, -- cgit v1.2.3-18-g5258 From 7ac18a3845145f4f48e611640e33918ae450f955 Mon Sep 17 00:00:00 2001 From: "Arnaud Patard (Rtp)" Date: Thu, 17 Feb 2011 15:31:28 +0100 Subject: Introduce EFIKA_COMMON The Genesi EFIKA MX and EFIKA Smartbook are sharing a lot of things so it makes sense to create a common file for both devices and a specific file for each. No functionnal change except dropping uart 1 & 2. Signed-off-by: Arnaud Patard Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/Kconfig | 8 +- arch/arm/mach-mx5/Makefile | 1 + arch/arm/mach-mx5/board-mx51_efikamx.c | 129 +----------------------- arch/arm/mach-mx5/efika.h | 6 ++ arch/arm/mach-mx5/mx51_efika.c | 175 +++++++++++++++++++++++++++++++++ 5 files changed, 191 insertions(+), 128 deletions(-) create mode 100644 arch/arm/mach-mx5/efika.h create mode 100644 arch/arm/mach-mx5/mx51_efika.c (limited to 'arch') diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index 10b600800fa..aa20a38ccc8 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -113,12 +113,16 @@ config MACH_EUKREA_MBIMXSD51_BASEBOARD endchoice -config MACH_MX51_EFIKAMX - bool "Support MX51 Genesi Efika MX nettop" +config MX51_EFIKA_COMMON + bool select SOC_IMX51 select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select IMX_HAVE_PLATFORM_SPI_IMX + +config MACH_MX51_EFIKAMX + bool "Support MX51 Genesi Efika MX nettop" + select MX51_EFIKA_COMMON help Include support for Genesi Efika MX nettop. This includes specific configurations for the board and its peripherals. diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile index dc2728823fd..64f6b0df64c 100644 --- a/arch/arm/mach-mx5/Makefile +++ b/arch/arm/mach-mx5/Makefile @@ -16,5 +16,6 @@ obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += board-cpuimx51sd.o obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o +obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o obj-$(CONFIG_MACH_MX51_EFIKAMX) += board-mx51_efikamx.o obj-$(CONFIG_MACH_MX50_RDP) += board-mx50_rdp.o diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c index c4094fa5794..272de6e883e 100644 --- a/arch/arm/mach-mx5/board-mx51_efikamx.c +++ b/arch/arm/mach-mx5/board-mx51_efikamx.c @@ -40,8 +40,7 @@ #include "devices-imx51.h" #include "devices.h" - -#define MX51_USB_PLL_DIV_24_MHZ 0x01 +#include "efika.h" #define EFIKAMX_PCBID0 IMX_GPIO_NR(3, 16) #define EFIKAMX_PCBID1 IMX_GPIO_NR(3, 17) @@ -53,9 +52,6 @@ #define EFIKAMX_POWER_KEY IMX_GPIO_NR(2, 31) -#define EFIKAMX_SPI_CS0 IMX_GPIO_NR(4, 24) -#define EFIKAMX_SPI_CS1 IMX_GPIO_NR(4, 25) - /* board 1.1 doesn't have same reset gpio */ #define EFIKAMX_RESET1_1 IMX_GPIO_NR(3, 2) #define EFIKAMX_RESET IMX_GPIO_NR(1, 4) @@ -67,38 +63,11 @@ #define MX51_PAD_PWRKEY IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE) static iomux_v3_cfg_t mx51efikamx_pads[] = { - /* UART1 */ - MX51_PAD_UART1_RXD__UART1_RXD, - MX51_PAD_UART1_TXD__UART1_TXD, - MX51_PAD_UART1_RTS__UART1_RTS, - MX51_PAD_UART1_CTS__UART1_CTS, /* board id */ MX51_PAD_PCBID0, MX51_PAD_PCBID1, MX51_PAD_PCBID2, - /* SD 1 */ - MX51_PAD_SD1_CMD__SD1_CMD, - MX51_PAD_SD1_CLK__SD1_CLK, - MX51_PAD_SD1_DATA0__SD1_DATA0, - MX51_PAD_SD1_DATA1__SD1_DATA1, - MX51_PAD_SD1_DATA2__SD1_DATA2, - MX51_PAD_SD1_DATA3__SD1_DATA3, - - /* SD 2 */ - MX51_PAD_SD2_CMD__SD2_CMD, - MX51_PAD_SD2_CLK__SD2_CLK, - MX51_PAD_SD2_DATA0__SD2_DATA0, - MX51_PAD_SD2_DATA1__SD2_DATA1, - MX51_PAD_SD2_DATA2__SD2_DATA2, - MX51_PAD_SD2_DATA3__SD2_DATA3, - - /* SD/MMC WP/CD */ - MX51_PAD_GPIO1_0__SD1_CD, - MX51_PAD_GPIO1_1__SD1_WP, - MX51_PAD_GPIO1_7__SD2_WP, - MX51_PAD_GPIO1_8__SD2_CD, - /* leds */ MX51_PAD_CSI1_D9__GPIO3_13, MX51_PAD_CSI1_VSYNC__GPIO3_14, @@ -107,55 +76,11 @@ static iomux_v3_cfg_t mx51efikamx_pads[] = { /* power key */ MX51_PAD_PWRKEY, - /* spi */ - MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI, - MX51_PAD_CSPI1_MISO__ECSPI1_MISO, - MX51_PAD_CSPI1_SS0__GPIO4_24, - MX51_PAD_CSPI1_SS1__GPIO4_25, - MX51_PAD_CSPI1_RDY__ECSPI1_RDY, - MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK, - /* reset */ MX51_PAD_DI1_PIN13__GPIO3_2, MX51_PAD_GPIO1_4__GPIO1_4, }; -/* Serial ports */ -static const struct imxuart_platform_data uart_pdata = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -/* This function is board specific as the bit mask for the plldiv will also - * be different for other Freescale SoCs, thus a common bitmask is not - * possible and cannot get place in /plat-mxc/ehci.c. - */ -static int initialize_otg_port(struct platform_device *pdev) -{ - u32 v; - void __iomem *usb_base; - void __iomem *usbother_base; - usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); - if (!usb_base) - return -ENOMEM; - usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET); - - /* Set the PHY clock to 19.2MHz */ - v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); - v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK; - v |= MX51_USB_PLL_DIV_24_MHZ; - __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); - iounmap(usb_base); - - mdelay(10); - - return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY); -} - -static struct mxc_usbh_platform_data dr_utmi_config = { - .init = initialize_otg_port, - .portsc = MXC_EHCI_UTMI_16BIT, -}; - /* PCBID2 PCBID1 PCBID0 STATE 1 1 1 ER1:rev1.1 1 1 0 ER2:rev1.2 @@ -254,47 +179,6 @@ static const struct gpio_keys_platform_data mx51_efikamx_powerkey_data __initcon .nbuttons = ARRAY_SIZE(mx51_efikamx_powerkey), }; -static struct mtd_partition mx51_efikamx_spi_nor_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = SZ_256K, - }, - { - .name = "config", - .offset = MTDPART_OFS_APPEND, - .size = SZ_64K, - }, -}; - -static struct flash_platform_data mx51_efikamx_spi_flash_data = { - .name = "spi_flash", - .parts = mx51_efikamx_spi_nor_partitions, - .nr_parts = ARRAY_SIZE(mx51_efikamx_spi_nor_partitions), - .type = "sst25vf032b", -}; - -static struct spi_board_info mx51_efikamx_spi_board_info[] __initdata = { - { - .modalias = "m25p80", - .max_speed_hz = 25000000, - .bus_num = 0, - .chip_select = 1, - .platform_data = &mx51_efikamx_spi_flash_data, - .irq = -1, - }, -}; - -static int mx51_efikamx_spi_cs[] = { - EFIKAMX_SPI_CS0, - EFIKAMX_SPI_CS1, -}; - -static const struct spi_imx_master mx51_efikamx_spi_pdata __initconst = { - .chipselect = mx51_efikamx_spi_cs, - .num_chipselect = ARRAY_SIZE(mx51_efikamx_spi_cs), -}; - void mx51_efikamx_reset(void) { if (system_rev == 0x11) @@ -307,12 +191,9 @@ static void __init mx51_efikamx_init(void) { mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads, ARRAY_SIZE(mx51efikamx_pads)); + efika_board_common_init(); + mx51_efikamx_board_id(); - mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config); - imx51_add_imx_uart(0, &uart_pdata); - imx51_add_imx_uart(1, &uart_pdata); - imx51_add_imx_uart(2, &uart_pdata); - imx51_add_sdhci_esdhc_imx(0, NULL); /* on < 1.2 boards both SD controllers are used */ if (system_rev < 0x12) { @@ -323,10 +204,6 @@ static void __init mx51_efikamx_init(void) platform_device_register(&mx51_efikamx_leds_device); imx51_add_gpio_keys(&mx51_efikamx_powerkey_data); - spi_register_board_info(mx51_efikamx_spi_board_info, - ARRAY_SIZE(mx51_efikamx_spi_board_info)); - imx51_add_ecspi(0, &mx51_efikamx_spi_pdata); - if (system_rev == 0x11) { gpio_request(EFIKAMX_RESET1_1, "reset"); gpio_direction_output(EFIKAMX_RESET1_1, 1); diff --git a/arch/arm/mach-mx5/efika.h b/arch/arm/mach-mx5/efika.h new file mode 100644 index 00000000000..c8280435934 --- /dev/null +++ b/arch/arm/mach-mx5/efika.h @@ -0,0 +1,6 @@ +#ifndef _EFIKA_H +#define _EFIKA_H + +void __init efika_board_common_init(void); + +#endif diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c new file mode 100644 index 00000000000..a249ca3c413 --- /dev/null +++ b/arch/arm/mach-mx5/mx51_efika.c @@ -0,0 +1,175 @@ +/* + * based on code from the following + * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved. + * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "devices-imx51.h" +#include "devices.h" +#include "efika.h" + +#define MX51_USB_PLL_DIV_24_MHZ 0x01 + +#define EFIKAMX_SPI_CS0 IMX_GPIO_NR(4, 24) +#define EFIKAMX_SPI_CS1 IMX_GPIO_NR(4, 25) + +static iomux_v3_cfg_t mx51efika_pads[] = { + /* UART1 */ + MX51_PAD_UART1_RXD__UART1_RXD, + MX51_PAD_UART1_TXD__UART1_TXD, + MX51_PAD_UART1_RTS__UART1_RTS, + MX51_PAD_UART1_CTS__UART1_CTS, + + /* SD 1 */ + MX51_PAD_SD1_CMD__SD1_CMD, + MX51_PAD_SD1_CLK__SD1_CLK, + MX51_PAD_SD1_DATA0__SD1_DATA0, + MX51_PAD_SD1_DATA1__SD1_DATA1, + MX51_PAD_SD1_DATA2__SD1_DATA2, + MX51_PAD_SD1_DATA3__SD1_DATA3, + + /* SD 2 */ + MX51_PAD_SD2_CMD__SD2_CMD, + MX51_PAD_SD2_CLK__SD2_CLK, + MX51_PAD_SD2_DATA0__SD2_DATA0, + MX51_PAD_SD2_DATA1__SD2_DATA1, + MX51_PAD_SD2_DATA2__SD2_DATA2, + MX51_PAD_SD2_DATA3__SD2_DATA3, + + /* SD/MMC WP/CD */ + MX51_PAD_GPIO1_0__SD1_CD, + MX51_PAD_GPIO1_1__SD1_WP, + MX51_PAD_GPIO1_7__SD2_WP, + MX51_PAD_GPIO1_8__SD2_CD, + + /* spi */ + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI, + MX51_PAD_CSPI1_MISO__ECSPI1_MISO, + MX51_PAD_CSPI1_SS0__GPIO4_24, + MX51_PAD_CSPI1_SS1__GPIO4_25, + MX51_PAD_CSPI1_RDY__ECSPI1_RDY, + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK, +}; + +/* Serial ports */ +static const struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +/* This function is board specific as the bit mask for the plldiv will also + * be different for other Freescale SoCs, thus a common bitmask is not + * possible and cannot get place in /plat-mxc/ehci.c. + */ +static int initialize_otg_port(struct platform_device *pdev) +{ + u32 v; + void __iomem *usb_base; + void __iomem *usbother_base; + usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); + if (!usb_base) + return -ENOMEM; + usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET); + + /* Set the PHY clock to 19.2MHz */ + v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); + v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK; + v |= MX51_USB_PLL_DIV_24_MHZ; + __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); + iounmap(usb_base); + + mdelay(10); + + return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY); +} + +static struct mxc_usbh_platform_data dr_utmi_config = { + .init = initialize_otg_port, + .portsc = MXC_EHCI_UTMI_16BIT, +}; + +static struct mtd_partition mx51_efika_spi_nor_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = SZ_256K, + }, + { + .name = "config", + .offset = MTDPART_OFS_APPEND, + .size = SZ_64K, + }, +}; + +static struct flash_platform_data mx51_efika_spi_flash_data = { + .name = "spi_flash", + .parts = mx51_efika_spi_nor_partitions, + .nr_parts = ARRAY_SIZE(mx51_efika_spi_nor_partitions), + .type = "sst25vf032b", +}; + +static struct spi_board_info mx51_efika_spi_board_info[] __initdata = { + { + .modalias = "m25p80", + .max_speed_hz = 25000000, + .bus_num = 0, + .chip_select = 1, + .platform_data = &mx51_efika_spi_flash_data, + .irq = -1, + }, +}; + +static int mx51_efika_spi_cs[] = { + EFIKAMX_SPI_CS0, + EFIKAMX_SPI_CS1, +}; + +static const struct spi_imx_master mx51_efika_spi_pdata __initconst = { + .chipselect = mx51_efika_spi_cs, + .num_chipselect = ARRAY_SIZE(mx51_efika_spi_cs), +}; + +void __init efika_board_common_init(void) +{ + mxc_iomux_v3_setup_multiple_pads(mx51efika_pads, + ARRAY_SIZE(mx51efika_pads)); + mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config); + imx51_add_imx_uart(0, &uart_pdata); + imx51_add_sdhci_esdhc_imx(0, NULL); + + spi_register_board_info(mx51_efika_spi_board_info, + ARRAY_SIZE(mx51_efika_spi_board_info)); + imx51_add_ecspi(0, &mx51_efika_spi_pdata); +} + -- cgit v1.2.3-18-g5258 From 9d72af6e3582977196e3474903950206dc3c590e Mon Sep 17 00:00:00 2001 From: "Arnaud Patard (Rtp)" Date: Thu, 17 Feb 2011 15:31:29 +0100 Subject: efikamx: add usb h1 support Now that usb has been fixed, we can enable usb h1 on efikamx Signed-off-by: Arnaud Patard Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/Kconfig | 1 + arch/arm/mach-mx5/board-mx51_efikamx.c | 14 +++++ arch/arm/mach-mx5/efika.h | 4 ++ arch/arm/mach-mx5/mx51_efika.c | 107 +++++++++++++++++++++++++++++++-- 4 files changed, 122 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index aa20a38ccc8..1405464c103 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -119,6 +119,7 @@ config MX51_EFIKA_COMMON select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select IMX_HAVE_PLATFORM_SPI_IMX + select MXC_ULPI if USB_ULPI config MACH_MX51_EFIKAMX bool "Support MX51 Genesi Efika MX nettop" diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c index 272de6e883e..8f173366b29 100644 --- a/arch/arm/mach-mx5/board-mx51_efikamx.c +++ b/arch/arm/mach-mx5/board-mx51_efikamx.c @@ -211,6 +211,20 @@ static void __init mx51_efikamx_init(void) gpio_request(EFIKAMX_RESET, "reset"); gpio_direction_output(EFIKAMX_RESET, 1); } + + /* + * enable wifi by default only on mx + * sb and mx have same wlan pin but the value to enable it are + * different :/ + */ + gpio_request(EFIKA_WLAN_EN, "wlan_en"); + gpio_direction_output(EFIKA_WLAN_EN, 0); + msleep(10); + + gpio_request(EFIKA_WLAN_RESET, "wlan_rst"); + gpio_direction_output(EFIKA_WLAN_RESET, 0); + msleep(10); + gpio_set_value(EFIKA_WLAN_RESET, 1); } static void __init mx51_efikamx_timer_init(void) diff --git a/arch/arm/mach-mx5/efika.h b/arch/arm/mach-mx5/efika.h index c8280435934..014aa985faa 100644 --- a/arch/arm/mach-mx5/efika.h +++ b/arch/arm/mach-mx5/efika.h @@ -1,6 +1,10 @@ #ifndef _EFIKA_H #define _EFIKA_H +#define EFIKA_WLAN_EN IMX_GPIO_NR(2, 16) +#define EFIKA_WLAN_RESET IMX_GPIO_NR(2, 10) +#define EFIKA_USB_PHY_RESET IMX_GPIO_NR(2, 9) + void __init efika_board_common_init(void); #endif diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c index a249ca3c413..c08ec63415e 100644 --- a/arch/arm/mach-mx5/mx51_efika.c +++ b/arch/arm/mach-mx5/mx51_efika.c @@ -30,6 +30,10 @@ #include #include +#include +#include +#include + #include #include #include @@ -40,7 +44,12 @@ #include "devices.h" #include "efika.h" -#define MX51_USB_PLL_DIV_24_MHZ 0x01 +#define MX51_USB_CTRL_1_OFFSET 0x10 +#define MX51_USB_CTRL_UH1_EXT_CLK_EN (1 << 25) +#define MX51_USB_PLL_DIV_19_2_MHZ 0x01 + +#define EFIKAMX_USB_HUB_RESET IMX_GPIO_NR(1, 5) +#define EFIKAMX_USBH1_STP IMX_GPIO_NR(1, 27) #define EFIKAMX_SPI_CS0 IMX_GPIO_NR(4, 24) #define EFIKAMX_SPI_CS1 IMX_GPIO_NR(4, 25) @@ -81,6 +90,29 @@ static iomux_v3_cfg_t mx51efika_pads[] = { MX51_PAD_CSPI1_SS1__GPIO4_25, MX51_PAD_CSPI1_RDY__ECSPI1_RDY, MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK, + + /* USB HOST1 */ + MX51_PAD_USBH1_CLK__USBH1_CLK, + MX51_PAD_USBH1_DIR__USBH1_DIR, + MX51_PAD_USBH1_NXT__USBH1_NXT, + MX51_PAD_USBH1_DATA0__USBH1_DATA0, + MX51_PAD_USBH1_DATA1__USBH1_DATA1, + MX51_PAD_USBH1_DATA2__USBH1_DATA2, + MX51_PAD_USBH1_DATA3__USBH1_DATA3, + MX51_PAD_USBH1_DATA4__USBH1_DATA4, + MX51_PAD_USBH1_DATA5__USBH1_DATA5, + MX51_PAD_USBH1_DATA6__USBH1_DATA6, + MX51_PAD_USBH1_DATA7__USBH1_DATA7, + + /* USB HUB RESET */ + MX51_PAD_GPIO1_5__GPIO1_5, + + /* WLAN */ + MX51_PAD_EIM_A22__GPIO2_16, + MX51_PAD_EIM_A16__GPIO2_10, + + /* USB PHY RESET */ + MX51_PAD_EIM_D27__GPIO2_9, }; /* Serial ports */ @@ -105,13 +137,13 @@ static int initialize_otg_port(struct platform_device *pdev) /* Set the PHY clock to 19.2MHz */ v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK; - v |= MX51_USB_PLL_DIV_24_MHZ; + v |= MX51_USB_PLL_DIV_19_2_MHZ; __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); iounmap(usb_base); mdelay(10); - return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY); + return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY); } static struct mxc_usbh_platform_data dr_utmi_config = { @@ -119,6 +151,73 @@ static struct mxc_usbh_platform_data dr_utmi_config = { .portsc = MXC_EHCI_UTMI_16BIT, }; +static int initialize_usbh1_port(struct platform_device *pdev) +{ + iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP; + iomux_v3_cfg_t usbh1gpio = MX51_PAD_USBH1_STP__GPIO1_27; + u32 v; + void __iomem *usb_base; + void __iomem *socregs_base; + + mxc_iomux_v3_setup_pad(usbh1gpio); + gpio_request(EFIKAMX_USBH1_STP, "usbh1_stp"); + gpio_direction_output(EFIKAMX_USBH1_STP, 0); + msleep(1); + gpio_set_value(EFIKAMX_USBH1_STP, 1); + msleep(1); + + usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); + socregs_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET); + + /* The clock for the USBH1 ULPI port will come externally */ + /* from the PHY. */ + v = __raw_readl(socregs_base + MX51_USB_CTRL_1_OFFSET); + __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, + socregs_base + MX51_USB_CTRL_1_OFFSET); + + iounmap(usb_base); + + gpio_free(EFIKAMX_USBH1_STP); + mxc_iomux_v3_setup_pad(usbh1stp); + + mdelay(10); + + return mx51_initialize_usb_hw(0, MXC_EHCI_ITC_NO_THRESHOLD); +} + +static struct mxc_usbh_platform_data usbh1_config = { + .init = initialize_usbh1_port, + .portsc = MXC_EHCI_MODE_ULPI, +}; + +static void mx51_efika_hubreset(void) +{ + gpio_request(EFIKAMX_USB_HUB_RESET, "usb_hub_rst"); + gpio_direction_output(EFIKAMX_USB_HUB_RESET, 1); + msleep(1); + gpio_set_value(EFIKAMX_USB_HUB_RESET, 0); + msleep(1); + gpio_set_value(EFIKAMX_USB_HUB_RESET, 1); +} + +static void __init mx51_efika_usb(void) +{ + mx51_efika_hubreset(); + + /* pulling it low, means no USB at all... */ + gpio_request(EFIKA_USB_PHY_RESET, "usb_phy_reset"); + gpio_direction_output(EFIKA_USB_PHY_RESET, 0); + msleep(1); + gpio_set_value(EFIKA_USB_PHY_RESET, 1); + + usbh1_config.otg = otg_ulpi_create(&mxc_ulpi_access_ops, + ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT | + ULPI_OTG_EXTVBUSIND); + + mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config); + mxc_register_device(&mxc_usbh1_device, &usbh1_config); +} + static struct mtd_partition mx51_efika_spi_nor_partitions[] = { { .name = "u-boot", @@ -164,8 +263,8 @@ void __init efika_board_common_init(void) { mxc_iomux_v3_setup_multiple_pads(mx51efika_pads, ARRAY_SIZE(mx51efika_pads)); - mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config); imx51_add_imx_uart(0, &uart_pdata); + mx51_efika_usb(); imx51_add_sdhci_esdhc_imx(0, NULL); spi_register_board_info(mx51_efika_spi_board_info, -- cgit v1.2.3-18-g5258 From 2432cff0fc1c9d1a41476994b18fda04bf9f2686 Mon Sep 17 00:00:00 2001 From: "Arnaud Patard (Rtp)" Date: Thu, 17 Feb 2011 15:31:30 +0100 Subject: efikamx: add mc13892 support / implement power off This patch declares regulators for the efikamx. Use it also to power off the efikamx. Unfortunately, on the efikamx to2 boards, this doesn't work but they allow to power off by setting GPIO 4 13 to high level instead of powering off through the mc13892. Signed-off-by: Arnaud Patard Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/board-mx51_efikamx.c | 50 +++++ arch/arm/mach-mx5/mx51_efika.c | 357 +++++++++++++++++++++++++++++++++ 2 files changed, 407 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c index 8f173366b29..acab1911cb3 100644 --- a/arch/arm/mach-mx5/board-mx51_efikamx.c +++ b/arch/arm/mach-mx5/board-mx51_efikamx.c @@ -25,6 +25,9 @@ #include #include #include +#include +#include +#include #include #include @@ -56,6 +59,10 @@ #define EFIKAMX_RESET1_1 IMX_GPIO_NR(3, 2) #define EFIKAMX_RESET IMX_GPIO_NR(1, 4) +#define EFIKAMX_POWEROFF IMX_GPIO_NR(4, 13) + +#define EFIKAMX_PMIC IMX_GPIO_NR(1, 6) + /* the pci ids pin have pull up. they're driven low according to board id */ #define MX51_PAD_PCBID0 IOMUX_PAD(0x518, 0x130, 3, 0x0, 0, PAD_CTL_PUS_100K_UP) #define MX51_PAD_PCBID1 IOMUX_PAD(0x51C, 0x134, 3, 0x0, 0, PAD_CTL_PUS_100K_UP) @@ -79,6 +86,9 @@ static iomux_v3_cfg_t mx51efikamx_pads[] = { /* reset */ MX51_PAD_DI1_PIN13__GPIO3_2, MX51_PAD_GPIO1_4__GPIO1_4, + + /* power off */ + MX51_PAD_CSI2_VSYNC__GPIO4_13, }; /* PCBID2 PCBID1 PCBID0 STATE @@ -187,6 +197,46 @@ void mx51_efikamx_reset(void) gpio_direction_output(EFIKAMX_RESET, 0); } +static struct regulator *pwgt1, *pwgt2, *coincell; + +static void mx51_efikamx_power_off(void) +{ + if (!IS_ERR(coincell)) + regulator_disable(coincell); + + if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) { + regulator_disable(pwgt2); + regulator_disable(pwgt1); + } + gpio_direction_output(EFIKAMX_POWEROFF, 1); +} + +static int __init mx51_efikamx_power_init(void) +{ + if (machine_is_mx51_efikamx()) { + pwgt1 = regulator_get(NULL, "pwgt1"); + pwgt2 = regulator_get(NULL, "pwgt2"); + if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) { + regulator_enable(pwgt1); + regulator_enable(pwgt2); + } + gpio_request(EFIKAMX_POWEROFF, "poweroff"); + pm_power_off = mx51_efikamx_power_off; + + /* enable coincell charger. maybe need a small power driver ? */ + coincell = regulator_get(NULL, "coincell"); + if (!IS_ERR(coincell)) { + regulator_set_voltage(coincell, 3000000, 3000000); + regulator_enable(coincell); + } + + regulator_has_full_constraints(); + } + + return 0; +} +late_initcall(mx51_efikamx_power_init); + static void __init mx51_efikamx_init(void) { mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads, diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c index c08ec63415e..b4d5ae913ff 100644 --- a/arch/arm/mach-mx5/mx51_efika.c +++ b/arch/arm/mach-mx5/mx51_efika.c @@ -23,6 +23,9 @@ #include #include #include +#include +#include +#include #include #include @@ -39,6 +42,7 @@ #include #include #include +#include #include "devices-imx51.h" #include "devices.h" @@ -54,6 +58,8 @@ #define EFIKAMX_SPI_CS0 IMX_GPIO_NR(4, 24) #define EFIKAMX_SPI_CS1 IMX_GPIO_NR(4, 25) +#define EFIKAMX_PMIC IMX_GPIO_NR(1, 6) + static iomux_v3_cfg_t mx51efika_pads[] = { /* UART1 */ MX51_PAD_UART1_RXD__UART1_RXD, @@ -90,6 +96,7 @@ static iomux_v3_cfg_t mx51efika_pads[] = { MX51_PAD_CSPI1_SS1__GPIO4_25, MX51_PAD_CSPI1_RDY__ECSPI1_RDY, MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK, + MX51_PAD_GPIO1_6__GPIO1_6, /* USB HOST1 */ MX51_PAD_USBH1_CLK__USBH1_CLK, @@ -238,6 +245,336 @@ static struct flash_platform_data mx51_efika_spi_flash_data = { .type = "sst25vf032b", }; +static struct regulator_consumer_supply sw1_consumers[] = { + { + .supply = "cpu_vcc", + } +}; + +static struct regulator_consumer_supply vdig_consumers[] = { + /* sgtl5000 */ + REGULATOR_SUPPLY("VDDA", "1-000a"), + REGULATOR_SUPPLY("VDDD", "1-000a"), +}; + +static struct regulator_consumer_supply vvideo_consumers[] = { + /* sgtl5000 */ + REGULATOR_SUPPLY("VDDIO", "1-000a"), +}; + +static struct regulator_consumer_supply vsd_consumers[] = { + REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx.0"), + REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx.1"), +}; + +static struct regulator_consumer_supply pwgt1_consumer[] = { + { + .supply = "pwgt1", + } +}; + +static struct regulator_consumer_supply pwgt2_consumer[] = { + { + .supply = "pwgt2", + } +}; + +static struct regulator_consumer_supply coincell_consumer[] = { + { + .supply = "coincell", + } +}; + +static struct regulator_init_data sw1_init = { + .constraints = { + .name = "SW1", + .min_uV = 600000, + .max_uV = 1375000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .valid_modes_mask = 0, + .always_on = 1, + .boot_on = 1, + .state_mem = { + .uV = 850000, + .mode = REGULATOR_MODE_NORMAL, + .enabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(sw1_consumers), + .consumer_supplies = sw1_consumers, +}; + +static struct regulator_init_data sw2_init = { + .constraints = { + .name = "SW2", + .min_uV = 900000, + .max_uV = 1850000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .always_on = 1, + .boot_on = 1, + .state_mem = { + .uV = 950000, + .mode = REGULATOR_MODE_NORMAL, + .enabled = 1, + }, + } +}; + +static struct regulator_init_data sw3_init = { + .constraints = { + .name = "SW3", + .min_uV = 1100000, + .max_uV = 1850000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .always_on = 1, + .boot_on = 1, + } +}; + +static struct regulator_init_data sw4_init = { + .constraints = { + .name = "SW4", + .min_uV = 1100000, + .max_uV = 1850000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .always_on = 1, + .boot_on = 1, + } +}; + +static struct regulator_init_data viohi_init = { + .constraints = { + .name = "VIOHI", + .boot_on = 1, + .always_on = 1, + } +}; + +static struct regulator_init_data vusb_init = { + .constraints = { + .name = "VUSB", + .boot_on = 1, + .always_on = 1, + } +}; + +static struct regulator_init_data swbst_init = { + .constraints = { + .name = "SWBST", + } +}; + +static struct regulator_init_data vdig_init = { + .constraints = { + .name = "VDIG", + .min_uV = 1050000, + .max_uV = 1800000, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, + .boot_on = 1, + .always_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(vdig_consumers), + .consumer_supplies = vdig_consumers, +}; + +static struct regulator_init_data vpll_init = { + .constraints = { + .name = "VPLL", + .min_uV = 1050000, + .max_uV = 1800000, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, + .boot_on = 1, + .always_on = 1, + } +}; + +static struct regulator_init_data vusb2_init = { + .constraints = { + .name = "VUSB2", + .min_uV = 2400000, + .max_uV = 2775000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .boot_on = 1, + .always_on = 1, + } +}; + +static struct regulator_init_data vvideo_init = { + .constraints = { + .name = "VVIDEO", + .min_uV = 2775000, + .max_uV = 2775000, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, + .boot_on = 1, + .apply_uV = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(vvideo_consumers), + .consumer_supplies = vvideo_consumers, +}; + +static struct regulator_init_data vaudio_init = { + .constraints = { + .name = "VAUDIO", + .min_uV = 2300000, + .max_uV = 3000000, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, + .boot_on = 1, + } +}; + +static struct regulator_init_data vsd_init = { + .constraints = { + .name = "VSD", + .min_uV = 1800000, + .max_uV = 3150000, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE, + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(vsd_consumers), + .consumer_supplies = vsd_consumers, +}; + +static struct regulator_init_data vcam_init = { + .constraints = { + .name = "VCAM", + .min_uV = 2500000, + .max_uV = 3000000, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, + .valid_modes_mask = REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL, + .boot_on = 1, + } +}; + +static struct regulator_init_data vgen1_init = { + .constraints = { + .name = "VGEN1", + .min_uV = 1200000, + .max_uV = 3150000, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, + .boot_on = 1, + .always_on = 1, + } +}; + +static struct regulator_init_data vgen2_init = { + .constraints = { + .name = "VGEN2", + .min_uV = 1200000, + .max_uV = 3150000, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, + .boot_on = 1, + .always_on = 1, + } +}; + +static struct regulator_init_data vgen3_init = { + .constraints = { + .name = "VGEN3", + .min_uV = 1800000, + .max_uV = 2900000, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, + .boot_on = 1, + .always_on = 1, + } +}; + +static struct regulator_init_data gpo1_init = { + .constraints = { + .name = "GPO1", + } +}; + +static struct regulator_init_data gpo2_init = { + .constraints = { + .name = "GPO2", + } +}; + +static struct regulator_init_data gpo3_init = { + .constraints = { + .name = "GPO3", + } +}; + +static struct regulator_init_data gpo4_init = { + .constraints = { + .name = "GPO4", + } +}; + +static struct regulator_init_data pwgt1_init = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(pwgt1_consumer), + .consumer_supplies = pwgt1_consumer, +}; + +static struct regulator_init_data pwgt2_init = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(pwgt2_consumer), + .consumer_supplies = pwgt2_consumer, +}; + +static struct regulator_init_data vcoincell_init = { + .constraints = { + .name = "COINCELL", + .min_uV = 3000000, + .max_uV = 3000000, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(coincell_consumer), + .consumer_supplies = coincell_consumer, +}; + +static struct mc13xxx_regulator_init_data mx51_efika_regulators[] = { + { .id = MC13892_SW1, .init_data = &sw1_init }, + { .id = MC13892_SW2, .init_data = &sw2_init }, + { .id = MC13892_SW3, .init_data = &sw3_init }, + { .id = MC13892_SW4, .init_data = &sw4_init }, + { .id = MC13892_SWBST, .init_data = &swbst_init }, + { .id = MC13892_VIOHI, .init_data = &viohi_init }, + { .id = MC13892_VPLL, .init_data = &vpll_init }, + { .id = MC13892_VDIG, .init_data = &vdig_init }, + { .id = MC13892_VSD, .init_data = &vsd_init }, + { .id = MC13892_VUSB2, .init_data = &vusb2_init }, + { .id = MC13892_VVIDEO, .init_data = &vvideo_init }, + { .id = MC13892_VAUDIO, .init_data = &vaudio_init }, + { .id = MC13892_VCAM, .init_data = &vcam_init }, + { .id = MC13892_VGEN1, .init_data = &vgen1_init }, + { .id = MC13892_VGEN2, .init_data = &vgen2_init }, + { .id = MC13892_VGEN3, .init_data = &vgen3_init }, + { .id = MC13892_VUSB, .init_data = &vusb_init }, + { .id = MC13892_GPO1, .init_data = &gpo1_init }, + { .id = MC13892_GPO2, .init_data = &gpo2_init }, + { .id = MC13892_GPO3, .init_data = &gpo3_init }, + { .id = MC13892_GPO4, .init_data = &gpo4_init }, + { .id = MC13892_PWGT1SPI, .init_data = &pwgt1_init }, + { .id = MC13892_PWGT2SPI, .init_data = &pwgt2_init }, + { .id = MC13892_VCOINCELL, .init_data = &vcoincell_init }, +}; + +static struct mc13xxx_platform_data mx51_efika_mc13892_data = { + .flags = MC13XXX_USE_RTC | MC13XXX_USE_REGULATOR, + .num_regulators = ARRAY_SIZE(mx51_efika_regulators), + .regulators = mx51_efika_regulators, +}; + static struct spi_board_info mx51_efika_spi_board_info[] __initdata = { { .modalias = "m25p80", @@ -247,6 +584,14 @@ static struct spi_board_info mx51_efika_spi_board_info[] __initdata = { .platform_data = &mx51_efika_spi_flash_data, .irq = -1, }, + { + .modalias = "mc13892", + .max_speed_hz = 1000000, + .bus_num = 0, + .chip_select = 0, + .platform_data = &mx51_efika_mc13892_data, + .irq = gpio_to_irq(EFIKAMX_PMIC), + }, }; static int mx51_efika_spi_cs[] = { @@ -267,6 +612,18 @@ void __init efika_board_common_init(void) mx51_efika_usb(); imx51_add_sdhci_esdhc_imx(0, NULL); + /* FIXME: comes from original code. check this. */ + if (mx51_revision() < IMX_CHIP_REVISION_2_0) + sw2_init.constraints.state_mem.uV = 1100000; + else if (mx51_revision() == IMX_CHIP_REVISION_2_0) { + sw2_init.constraints.state_mem.uV = 1250000; + sw1_init.constraints.state_mem.uV = 1000000; + } + if (machine_is_mx51_efikasb()) + vgen1_init.constraints.max_uV = 1200000; + + gpio_request(EFIKAMX_PMIC, "pmic irq"); + gpio_direction_input(EFIKAMX_PMIC); spi_register_board_info(mx51_efika_spi_board_info, ARRAY_SIZE(mx51_efika_spi_board_info)); imx51_add_ecspi(0, &mx51_efika_spi_pdata); -- cgit v1.2.3-18-g5258 From 856e656c4a328907c2b1fdbb6523f16fe1c71b46 Mon Sep 17 00:00:00 2001 From: "Arnaud Patard (Rtp)" Date: Thu, 17 Feb 2011 15:31:31 +0100 Subject: efika: enable cpufreq Enable cpufreq on Genesi efika platforms Signed-off-by: Arnaud Patard Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/mx51_efika.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c index b4d5ae913ff..74991c913bf 100644 --- a/arch/arm/mach-mx5/mx51_efika.c +++ b/arch/arm/mach-mx5/mx51_efika.c @@ -47,6 +47,7 @@ #include "devices-imx51.h" #include "devices.h" #include "efika.h" +#include "cpu_op-mx51.h" #define MX51_USB_CTRL_1_OFFSET 0x10 #define MX51_USB_CTRL_UH1_EXT_CLK_EN (1 << 25) @@ -627,5 +628,9 @@ void __init efika_board_common_init(void) spi_register_board_info(mx51_efika_spi_board_info, ARRAY_SIZE(mx51_efika_spi_board_info)); imx51_add_ecspi(0, &mx51_efika_spi_pdata); + +#if defined(CONFIG_CPU_FREQ_IMX) + get_cpu_op = mx51_get_cpu_op; +#endif } -- cgit v1.2.3-18-g5258 From 102c91d8c60bc40e100ead62ac1e9ba05601510c Mon Sep 17 00:00:00 2001 From: "Arnaud Patard (Rtp)" Date: Thu, 17 Feb 2011 15:31:32 +0100 Subject: mx51: add support for efika smartbook Signed-off-by: Arnaud Patard Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/Kconfig | 7 + arch/arm/mach-mx5/Makefile | 1 + arch/arm/mach-mx5/board-mx51_efikasb.c | 283 +++++++++++++++++++++++++++++++++ 3 files changed, 291 insertions(+) create mode 100644 arch/arm/mach-mx5/board-mx51_efikasb.c (limited to 'arch') diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index 1405464c103..026b68180c8 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -128,6 +128,13 @@ config MACH_MX51_EFIKAMX Include support for Genesi Efika MX nettop. This includes specific configurations for the board and its peripherals. +config MACH_MX51_EFIKASB + bool "Support MX51 Genesi Efika Smartbook" + select MX51_EFIKA_COMMON + help + Include support for Genesi Efika Smartbook. This includes specific + configurations for the board and its peripherals. + config MACH_MX53_EVK bool "Support MX53 EVK platforms" select SOC_IMX53 diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile index 64f6b0df64c..4f63048be3c 100644 --- a/arch/arm/mach-mx5/Makefile +++ b/arch/arm/mach-mx5/Makefile @@ -18,4 +18,5 @@ obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += board-cpuimx51sd.o obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o obj-$(CONFIG_MACH_MX51_EFIKAMX) += board-mx51_efikamx.o +obj-$(CONFIG_MACH_MX51_EFIKASB) += board-mx51_efikasb.o obj-$(CONFIG_MACH_MX50_RDP) += board-mx50_rdp.o diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c new file mode 100644 index 00000000000..18e29b9b088 --- /dev/null +++ b/arch/arm/mach-mx5/board-mx51_efikasb.c @@ -0,0 +1,283 @@ +/* + * Copyright (C) Arnaud Patard + * + * based on code from the following + * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved. + * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "devices-imx51.h" +#include "devices.h" +#include "efika.h" + +#define EFIKASB_USBH2_STP IMX_GPIO_NR(2, 20) +#define EFIKASB_GREEN_LED IMX_GPIO_NR(1, 3) +#define EFIKASB_WHITE_LED IMX_GPIO_NR(2, 25) +#define EFIKASB_PCBID0 IMX_GPIO_NR(2, 28) +#define EFIKASB_PCBID1 IMX_GPIO_NR(2, 29) +#define EFIKASB_PWRKEY IMX_GPIO_NR(2, 31) +#define EFIKASB_LID IMX_GPIO_NR(3, 14) +#define EFIKASB_POWEROFF IMX_GPIO_NR(4, 13) +#define EFIKASB_RFKILL IMX_GPIO_NR(3, 1) + +#define MX51_PAD_PWRKEY IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE) + +static iomux_v3_cfg_t mx51efikasb_pads[] = { + /* USB HOST2 */ + MX51_PAD_EIM_D16__USBH2_DATA0, + MX51_PAD_EIM_D17__USBH2_DATA1, + MX51_PAD_EIM_D18__USBH2_DATA2, + MX51_PAD_EIM_D19__USBH2_DATA3, + MX51_PAD_EIM_D20__USBH2_DATA4, + MX51_PAD_EIM_D21__USBH2_DATA5, + MX51_PAD_EIM_D22__USBH2_DATA6, + MX51_PAD_EIM_D23__USBH2_DATA7, + MX51_PAD_EIM_A24__USBH2_CLK, + MX51_PAD_EIM_A25__USBH2_DIR, + MX51_PAD_EIM_A26__USBH2_STP, + MX51_PAD_EIM_A27__USBH2_NXT, + + /* leds */ + MX51_PAD_EIM_CS0__GPIO2_25, + MX51_PAD_GPIO1_3__GPIO1_3, + + /* pcb id */ + MX51_PAD_EIM_CS3__GPIO2_28, + MX51_PAD_EIM_CS4__GPIO2_29, + + /* lid */ + MX51_PAD_CSI1_VSYNC__GPIO3_14, + + /* power key*/ + MX51_PAD_PWRKEY, + + /* wifi/bt button */ + MX51_PAD_DI1_PIN12__GPIO3_1, + + /* power off */ + MX51_PAD_CSI2_VSYNC__GPIO4_13, + + /* wdog reset */ + MX51_PAD_GPIO1_4__WDOG1_WDOG_B, + + /* BT */ + MX51_PAD_EIM_A17__GPIO2_11, +}; + +static int initialize_usbh2_port(struct platform_device *pdev) +{ + iomux_v3_cfg_t usbh2stp = MX51_PAD_EIM_A26__USBH2_STP; + iomux_v3_cfg_t usbh2gpio = MX51_PAD_EIM_A26__GPIO2_20; + + mxc_iomux_v3_setup_pad(usbh2gpio); + gpio_request(EFIKASB_USBH2_STP, "usbh2_stp"); + gpio_direction_output(EFIKASB_USBH2_STP, 0); + msleep(1); + gpio_set_value(EFIKASB_USBH2_STP, 1); + msleep(1); + + gpio_free(EFIKASB_USBH2_STP); + mxc_iomux_v3_setup_pad(usbh2stp); + + mdelay(10); + + return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD); +} + +static struct mxc_usbh_platform_data usbh2_config = { + .init = initialize_usbh2_port, + .portsc = MXC_EHCI_MODE_ULPI, +}; + +static void __init mx51_efikasb_usb(void) +{ + usbh2_config.otg = otg_ulpi_create(&mxc_ulpi_access_ops, + ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT | + ULPI_OTG_EXTVBUSIND); + mxc_register_device(&mxc_usbh2_device, &usbh2_config); +} + +static struct gpio_led mx51_efikasb_leds[] = { + { + .name = "efikasb:green", + .default_trigger = "default-on", + .gpio = EFIKASB_GREEN_LED, + .active_low = 1, + }, + { + .name = "efikasb:white", + .default_trigger = "caps", + .gpio = EFIKASB_WHITE_LED, + }, +}; + +static struct gpio_led_platform_data mx51_efikasb_leds_data = { + .leds = mx51_efikasb_leds, + .num_leds = ARRAY_SIZE(mx51_efikasb_leds), +}; + +static struct platform_device mx51_efikasb_leds_device = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &mx51_efikasb_leds_data, + }, +}; + +static struct gpio_keys_button mx51_efikasb_keys[] = { + { + .code = KEY_POWER, + .gpio = EFIKASB_PWRKEY, + .type = EV_PWR, + .desc = "Power Button", + .wakeup = 1, + .debounce_interval = 10, /* ms */ + }, + { + .code = SW_LID, + .gpio = EFIKASB_LID, + .type = EV_SW, + .desc = "Lid Switch", + }, + { + /* SW_RFKILLALL vs KEY_RFKILL ? */ + .code = SW_RFKILL_ALL, + .gpio = EFIKASB_RFKILL, + .type = EV_SW, + .desc = "rfkill", + }, +}; + +static const struct gpio_keys_platform_data mx51_efikasb_keys_data __initconst = { + .buttons = mx51_efikasb_keys, + .nbuttons = ARRAY_SIZE(mx51_efikasb_keys), +}; + +static struct regulator *pwgt1, *pwgt2; + +static void mx51_efikasb_power_off(void) +{ + gpio_set_value(EFIKA_USB_PHY_RESET, 0); + + if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) { + regulator_disable(pwgt2); + regulator_disable(pwgt1); + } + gpio_direction_output(EFIKASB_POWEROFF, 1); +} + +static int __init mx51_efikasb_power_init(void) +{ + if (machine_is_mx51_efikasb()) { + pwgt1 = regulator_get(NULL, "pwgt1"); + pwgt2 = regulator_get(NULL, "pwgt2"); + if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) { + regulator_enable(pwgt1); + regulator_enable(pwgt2); + } + gpio_request(EFIKASB_POWEROFF, "poweroff"); + pm_power_off = mx51_efikasb_power_off; + + regulator_has_full_constraints(); + } + + return 0; +} +late_initcall(mx51_efikasb_power_init); + +/* 01 R1.3 board + 10 R2.0 board */ +static void __init mx51_efikasb_board_id(void) +{ + int id; + + gpio_request(EFIKASB_PCBID0, "pcb id0"); + gpio_direction_input(EFIKASB_PCBID0); + gpio_request(EFIKASB_PCBID1, "pcb id1"); + gpio_direction_input(EFIKASB_PCBID1); + + id = gpio_get_value(EFIKASB_PCBID0); + id |= gpio_get_value(EFIKASB_PCBID1) << 1; + + switch (id) { + default: + break; + case 1: + system_rev = 0x13; + break; + case 2: + system_rev = 0x20; + break; + } +} + +static void __init efikasb_board_init(void) +{ + mxc_iomux_v3_setup_multiple_pads(mx51efikasb_pads, + ARRAY_SIZE(mx51efikasb_pads)); + efika_board_common_init(); + + mx51_efikasb_board_id(); + mx51_efikasb_usb(); + imx51_add_sdhci_esdhc_imx(1, NULL); + + platform_device_register(&mx51_efikasb_leds_device); + imx51_add_gpio_keys(&mx51_efikasb_keys_data); + +} + +static void __init mx51_efikasb_timer_init(void) +{ + mx51_clocks_init(32768, 24000000, 22579200, 24576000); +} + +static struct sys_timer mx51_efikasb_timer = { + .init = mx51_efikasb_timer_init, +}; + +MACHINE_START(MX51_EFIKASB, "Genesi Efika Smartbook") + .boot_params = MX51_PHYS_OFFSET + 0x100, + .map_io = mx51_map_io, + .init_early = imx51_init_early, + .init_irq = mx51_init_irq, + .init_machine = efikasb_board_init, + .timer = &mx51_efikasb_timer, +MACHINE_END -- cgit v1.2.3-18-g5258 From 78c73591a91c120c4be02dafc018fcd7ecc8688a Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 17 Feb 2011 18:09:52 -0200 Subject: ARM: mx5: Add watchdog support for MX53 Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/clock-mx51-mx53.c | 2 ++ arch/arm/mach-mx5/devices-imx53.h | 4 ++++ arch/arm/mach-mx5/mm.c | 2 +- arch/arm/plat-mxc/devices/platform-imx2-wdt.c | 9 +++++++++ arch/arm/plat-mxc/include/mach/mx53.h | 2 +- 5 files changed, 17 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c index c66be0ee40c..8164b1dd952 100644 --- a/arch/arm/mach-mx5/clock-mx51-mx53.c +++ b/arch/arm/mach-mx5/clock-mx51-mx53.c @@ -1336,6 +1336,8 @@ static struct clk_lookup mx53_lookups[] = { _REGISTER_CLOCK("imx53-ecspi.0", NULL, ecspi1_clk) _REGISTER_CLOCK("imx53-ecspi.1", NULL, ecspi2_clk) _REGISTER_CLOCK("imx53-cspi.0", NULL, cspi_clk) + _REGISTER_CLOCK("imx2-wdt.0", NULL, dummy_clk) + _REGISTER_CLOCK("imx2-wdt.1", NULL, dummy_clk) }; static void clk_tree_init(void) diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-mx5/devices-imx53.h index 8639735a117..9251008dad1 100644 --- a/arch/arm/mach-mx5/devices-imx53.h +++ b/arch/arm/mach-mx5/devices-imx53.h @@ -29,3 +29,7 @@ imx53_sdhci_esdhc_imx_data[] __initconst; extern const struct imx_spi_imx_data imx53_ecspi_data[] __initconst; #define imx53_add_ecspi(id, pdata) \ imx_add_spi_imx(&imx53_ecspi_data[id], pdata) + +extern const struct imx_imx2_wdt_data imx53_imx2_wdt_data[] __initconst; +#define imx53_add_imx2_wdt(id, pdata) \ + imx_add_imx2_wdt(&imx53_imx2_wdt_data[id]) diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c index 8730cd1b94b..ff557301b42 100644 --- a/arch/arm/mach-mx5/mm.c +++ b/arch/arm/mach-mx5/mm.c @@ -66,7 +66,7 @@ void __init imx53_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX53); mxc_iomux_v3_init(MX53_IO_ADDRESS(MX53_IOMUXC_BASE_ADDR)); - mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG_BASE_ADDR)); + mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG1_BASE_ADDR)); } int imx51_register_gpios(void); diff --git a/arch/arm/plat-mxc/devices/platform-imx2-wdt.c b/arch/arm/plat-mxc/devices/platform-imx2-wdt.c index e0aec61177f..5e07ef2bf1c 100644 --- a/arch/arm/plat-mxc/devices/platform-imx2-wdt.c +++ b/arch/arm/plat-mxc/devices/platform-imx2-wdt.c @@ -53,6 +53,15 @@ const struct imx_imx2_wdt_data imx51_imx2_wdt_data[] __initconst = { }; #endif /* ifdef CONFIG_SOC_IMX51 */ +#ifdef CONFIG_SOC_IMX53 +const struct imx_imx2_wdt_data imx53_imx2_wdt_data[] __initconst = { +#define imx53_imx2_wdt_data_entry(_id, _hwid) \ + imx_imx2_wdt_data_entry(MX53, _id, _hwid, SZ_16K) + imx53_imx2_wdt_data_entry(0, 1), + imx53_imx2_wdt_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_SOC_IMX53 */ + struct platform_device *__init imx_add_imx2_wdt( const struct imx_imx2_wdt_data *data) { diff --git a/arch/arm/plat-mxc/include/mach/mx53.h b/arch/arm/plat-mxc/include/mach/mx53.h index d7a8e52181e..ace17864575 100644 --- a/arch/arm/plat-mxc/include/mach/mx53.h +++ b/arch/arm/plat-mxc/include/mach/mx53.h @@ -79,7 +79,7 @@ #define MX53_GPIO3_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x0008C000) #define MX53_GPIO4_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00090000) #define MX53_KPP_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00094000) -#define MX53_WDOG_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00098000) +#define MX53_WDOG1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00098000) #define MX53_WDOG2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x0009C000) #define MX53_GPT1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000A0000) #define MX53_SRTC_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000A4000) -- cgit v1.2.3-18-g5258 From daa7954ccd8a0e99376d52c46978f16067f8c2de Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 17 Feb 2011 18:09:53 -0200 Subject: ARM: mach-mx5: Add watchdog support for MX53 based boards Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/Kconfig | 3 +++ arch/arm/mach-mx5/board-mx53_evk.c | 1 + arch/arm/mach-mx5/board-mx53_loco.c | 1 + arch/arm/mach-mx5/board-mx53_smd.c | 1 + 4 files changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index 026b68180c8..6466d7389c3 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -138,6 +138,7 @@ config MACH_MX51_EFIKASB config MACH_MX53_EVK bool "Support MX53 EVK platforms" select SOC_IMX53 + select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX @@ -149,6 +150,7 @@ config MACH_MX53_EVK config MACH_MX53_SMD bool "Support MX53 SMD platforms" select SOC_IMX53 + select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_UART help Include support for MX53 SMD platform. This includes specific @@ -157,6 +159,7 @@ config MACH_MX53_SMD config MACH_MX53_LOCO bool "Support MX53 LOCO platforms" select SOC_IMX53 + select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_UART help Include support for MX53 LOCO platform. This includes specific diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c index 8ed316bc526..652e1e0131b 100644 --- a/arch/arm/mach-mx5/board-mx53_evk.c +++ b/arch/arm/mach-mx5/board-mx53_evk.c @@ -137,6 +137,7 @@ static void __init mx53_evk_board_init(void) spi_register_board_info(mx53_evk_spi_board_info, ARRAY_SIZE(mx53_evk_spi_board_info)); imx53_add_ecspi(0, &mx53_evk_spi_data); + imx53_add_imx2_wdt(0, NULL); } static void __init mx53_evk_timer_init(void) diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c index 0fea252d42e..6005f4945c7 100644 --- a/arch/arm/mach-mx5/board-mx53_loco.c +++ b/arch/arm/mach-mx5/board-mx53_loco.c @@ -69,6 +69,7 @@ static void __init mx53_loco_board_init(void) imx53_add_imx_uart(0, NULL); mx53_loco_fec_reset(); imx53_add_fec(&mx53_loco_fec_data); + imx53_add_imx2_wdt(0, NULL); } static void __init mx53_loco_timer_init(void) diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c index fa0fad80fd8..8a8694c3eb2 100644 --- a/arch/arm/mach-mx5/board-mx53_smd.c +++ b/arch/arm/mach-mx5/board-mx53_smd.c @@ -90,6 +90,7 @@ static void __init mx53_smd_board_init(void) mx53_smd_init_uart(); mx53_smd_fec_reset(); imx53_add_fec(&mx53_smd_fec_data); + imx53_add_imx2_wdt(0, NULL); } static void __init mx53_smd_timer_init(void) -- cgit v1.2.3-18-g5258 From 6388b96e84712a2cc045e8371eabd7312ee12fc4 Mon Sep 17 00:00:00 2001 From: Richard Zhao Date: Fri, 18 Feb 2011 12:36:14 +0800 Subject: ARM: imx53_loco: add all pad configure. Signed-off-by: Richard Zhao Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/board-mx53_loco.c | 137 ++++++++++++++++++++++++++++++++++++ 1 file changed, 137 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c index 6005f4945c7..3d749ada4eb 100644 --- a/arch/arm/mach-mx5/board-mx53_loco.c +++ b/arch/arm/mach-mx5/board-mx53_loco.c @@ -39,8 +39,145 @@ #define LOCO_FEC_PHY_RST IMX_GPIO_NR(7, 6) static iomux_v3_cfg_t mx53_loco_pads[] = { + /* FEC */ + MX53_PAD_FEC_MDC__FEC_MDC, + MX53_PAD_FEC_MDIO__FEC_MDIO, + MX53_PAD_FEC_REF_CLK__FEC_TX_CLK, + MX53_PAD_FEC_RX_ER__FEC_RX_ER, + MX53_PAD_FEC_CRS_DV__FEC_RX_DV, + MX53_PAD_FEC_RXD1__FEC_RDATA_1, + MX53_PAD_FEC_RXD0__FEC_RDATA_0, + MX53_PAD_FEC_TX_EN__FEC_TX_EN, + MX53_PAD_FEC_TXD1__FEC_TDATA_1, + MX53_PAD_FEC_TXD0__FEC_TDATA_0, + /* FEC_nRST */ + MX53_PAD_PATA_DA_0__GPIO7_6, + /* FEC_nINT */ + MX53_PAD_PATA_DATA4__GPIO2_4, + /* AUDMUX5 */ + MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC, + MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD, + MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS, + MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD, + /* I2C2 */ + MX53_PAD_KEY_COL3__I2C2_SCL, + MX53_PAD_KEY_ROW3__I2C2_SDA, + /* SD1 */ + MX53_PAD_SD1_CMD__ESDHC1_CMD, + MX53_PAD_SD1_CLK__ESDHC1_CLK, + MX53_PAD_SD1_DATA0__ESDHC1_DAT0, + MX53_PAD_SD1_DATA1__ESDHC1_DAT1, + MX53_PAD_SD1_DATA2__ESDHC1_DAT2, + MX53_PAD_SD1_DATA3__ESDHC1_DAT3, + /* SD3 */ + MX53_PAD_PATA_DATA8__ESDHC3_DAT0, + MX53_PAD_PATA_DATA9__ESDHC3_DAT1, + MX53_PAD_PATA_DATA10__ESDHC3_DAT2, + MX53_PAD_PATA_DATA11__ESDHC3_DAT3, + MX53_PAD_PATA_DATA0__ESDHC3_DAT4, + MX53_PAD_PATA_DATA1__ESDHC3_DAT5, + MX53_PAD_PATA_DATA2__ESDHC3_DAT6, + MX53_PAD_PATA_DATA3__ESDHC3_DAT7, + MX53_PAD_PATA_IORDY__ESDHC3_CLK, + MX53_PAD_PATA_RESET_B__ESDHC3_CMD, + /* SD3_CD */ + MX53_PAD_EIM_DA11__GPIO3_11, + /* SD3_WP */ + MX53_PAD_EIM_DA12__GPIO3_12, + /* VGA */ + MX53_PAD_EIM_OE__IPU_DI1_PIN7, + MX53_PAD_EIM_RW__IPU_DI1_PIN8, + /* DISPLB */ + MX53_PAD_EIM_D20__IPU_SER_DISP0_CS, + MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK, + MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN, + MX53_PAD_EIM_D23__IPU_DI0_D0_CS, + /* DISP0_POWER_EN */ + MX53_PAD_EIM_D24__GPIO3_24, + /* DISP0 DET INT */ + MX53_PAD_EIM_D31__GPIO3_31, + /* LVDS */ + MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3, + MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK, + MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2, + MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1, + MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0, + MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3, + MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2, + MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK, + MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1, + MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0, + /* I2C1 */ + MX53_PAD_CSI0_DAT8__I2C1_SDA, + MX53_PAD_CSI0_DAT9__I2C1_SCL, + /* UART1 */ MX53_PAD_CSI0_DAT10__UART1_TXD_MUX, MX53_PAD_CSI0_DAT11__UART1_RXD_MUX, + /* CSI0 */ + MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12, + MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13, + MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14, + MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15, + MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16, + MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17, + MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18, + MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19, + MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC, + MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC, + MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK, + /* DISPLAY */ + MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK, + MX53_PAD_DI0_PIN15__IPU_DI0_PIN15, + MX53_PAD_DI0_PIN2__IPU_DI0_PIN2, + MX53_PAD_DI0_PIN3__IPU_DI0_PIN3, + MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0, + MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1, + MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2, + MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3, + MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4, + MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5, + MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6, + MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7, + MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8, + MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9, + MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10, + MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11, + MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12, + MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13, + MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14, + MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15, + MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16, + MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17, + MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18, + MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19, + MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20, + MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21, + MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22, + MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23, + /* Audio CLK*/ + MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK, + /* PWM */ + MX53_PAD_GPIO_1__PWM2_PWMO, + /* SPDIF */ + MX53_PAD_GPIO_7__SPDIF_PLOCK, + MX53_PAD_GPIO_17__SPDIF_OUT1, + /* GPIO */ + MX53_PAD_PATA_DA_1__GPIO7_7, + MX53_PAD_PATA_DA_2__GPIO7_8, + MX53_PAD_PATA_DATA5__GPIO2_5, + MX53_PAD_PATA_DATA6__GPIO2_6, + MX53_PAD_PATA_DATA14__GPIO2_14, + MX53_PAD_PATA_DATA15__GPIO2_15, + MX53_PAD_PATA_INTRQ__GPIO7_2, + MX53_PAD_EIM_WAIT__GPIO5_0, + MX53_PAD_NANDF_WP_B__GPIO6_9, + MX53_PAD_NANDF_RB0__GPIO6_10, + MX53_PAD_NANDF_CS1__GPIO6_14, + MX53_PAD_NANDF_CS2__GPIO6_15, + MX53_PAD_NANDF_CS3__GPIO6_16, + MX53_PAD_GPIO_5__GPIO1_5, + MX53_PAD_GPIO_16__GPIO7_11, + MX53_PAD_GPIO_8__GPIO1_8, }; static inline void mx53_loco_fec_reset(void) -- cgit v1.2.3-18-g5258 From c4e942b76414367d034640835a0fcbab5d0cc434 Mon Sep 17 00:00:00 2001 From: Richard Zhao Date: Fri, 18 Feb 2011 12:36:15 +0800 Subject: ARM: imx53_loco add uncompress print Signed-off-by: Richard Zhao Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/include/mach/uncompress.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h index e634d6c2e7b..b7028845b1a 100644 --- a/arch/arm/plat-mxc/include/mach/uncompress.h +++ b/arch/arm/plat-mxc/include/mach/uncompress.h @@ -111,6 +111,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) uart_base = MX50_UART1_BASE_ADDR; break; case MACH_TYPE_MX53_EVK: + case MACH_TYPE_MX53_LOCO: uart_base = MX53_UART1_BASE_ADDR; break; default: -- cgit v1.2.3-18-g5258 From 942b99f3a0497a9a53df82ad685082b2980fe75d Mon Sep 17 00:00:00 2001 From: Richard Zhao Date: Fri, 18 Feb 2011 12:36:16 +0800 Subject: ARM: imx53_loco: add i2c device support Signed-off-by: Richard Zhao Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/Kconfig | 1 + arch/arm/mach-mx5/board-mx53_loco.c | 6 ++++++ 2 files changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index 6466d7389c3..f065a0d8d93 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -160,6 +160,7 @@ config MACH_MX53_LOCO bool "Support MX53 LOCO platforms" select SOC_IMX53 select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART help Include support for MX53 LOCO platform. This includes specific diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c index 3d749ada4eb..160899e6d6c 100644 --- a/arch/arm/mach-mx5/board-mx53_loco.c +++ b/arch/arm/mach-mx5/board-mx53_loco.c @@ -199,6 +199,10 @@ static struct fec_platform_data mx53_loco_fec_data = { .phy = PHY_INTERFACE_MODE_RMII, }; +static const struct imxi2c_platform_data mx53_loco_i2c_data __initconst = { + .bitrate = 100000, +}; + static void __init mx53_loco_board_init(void) { mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads, @@ -207,6 +211,8 @@ static void __init mx53_loco_board_init(void) mx53_loco_fec_reset(); imx53_add_fec(&mx53_loco_fec_data); imx53_add_imx2_wdt(0, NULL); + imx53_add_imx_i2c(0, &mx53_loco_i2c_data); + imx53_add_imx_i2c(1, &mx53_loco_i2c_data); } static void __init mx53_loco_timer_init(void) -- cgit v1.2.3-18-g5258 From b807afe41ceefef11a0d965cd9970142afc53d25 Mon Sep 17 00:00:00 2001 From: Richard Zhao Date: Fri, 18 Feb 2011 12:36:17 +0800 Subject: ARM: imx50: correct iomux-mx50.h wrong daisy chain settings Most fix is for uart txd/cts. They don't need to select input. And fix some other pads with wrong select input. Signed-off-by: Richard Zhao Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/include/mach/iomux-mx50.h | 44 ++++++++++++++--------------- 1 file changed, 22 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx50.h b/arch/arm/plat-mxc/include/mach/iomux-mx50.h index 058a922ca14..98e7fd0b908 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx50.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx50.h @@ -86,7 +86,7 @@ #define MX50_PAD_I2C1_SCL__I2C1_SCL IOMUX_PAD(0x2EC, 0x40, IOMUX_CONFIG_SION, 0x0, 0, \ MX50_I2C_PAD_CTRL) #define MX50_PAD_I2C1_SCL__GPIO_6_18 IOMUX_PAD(0x2EC, 0x40, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_I2C1_SCL__UART2_TXD IOMUX_PAD(0x2EC, 0x40, 2, 0x7cc, 0, MX50_UART_PAD_CTRL) +#define MX50_PAD_I2C1_SCL__UART2_TXD IOMUX_PAD(0x2EC, 0x40, 2, 0x0, 0, MX50_UART_PAD_CTRL) #define MX50_PAD_I2C1_SDA__I2C1_SDA IOMUX_PAD(0x2F0, 0x44, IOMUX_CONFIG_SION, 0x0, 0, \ MX50_I2C_PAD_CTRL) @@ -96,7 +96,7 @@ #define MX50_PAD_I2C2_SCL__I2C2_SCL IOMUX_PAD(0x2F4, 0x48, IOMUX_CONFIG_SION, 0x0, 0, \ MX50_I2C_PAD_CTRL) #define MX50_PAD_I2C2_SCL__GPIO_6_20 IOMUX_PAD(0x2F4, 0x48, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_I2C2_SCL__UART2_CTS IOMUX_PAD(0x2F4, 0x48, 2, 0x7c8, 0, MX50_UART_PAD_CTRL) +#define MX50_PAD_I2C2_SCL__UART2_CTS IOMUX_PAD(0x2F4, 0x48, 2, 0x0, 0, MX50_UART_PAD_CTRL) #define MX50_PAD_I2C2_SCL__DCDC_OK IOMUX_PAD(0x2F4, 0x48, 7, 0x0, 0, NO_PAD_CTRL) #define MX50_PAD_I2C2_SDA__I2C2_SDA IOMUX_PAD(0x2F8, 0x4C, IOMUX_CONFIG_SION, 0x0, 0, \ @@ -172,7 +172,7 @@ #define MX50_PAD_SSI_RXFS__AUD3_RXFS IOMUX_PAD(0x328, 0x7C, 0, 0x0, 0, NO_PAD_CTRL) #define MX50_PAD_SSI_RXFS__GPIO_6_4 IOMUX_PAD(0x328, 0x7C, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_SSI_RXFS__UART5_TXD IOMUX_PAD(0x328, 0x7C, 2, 0x7e4, 0, MX50_UART_PAD_CTRL) +#define MX50_PAD_SSI_RXFS__UART5_TXD IOMUX_PAD(0x328, 0x7C, 2, 0x0, 0, MX50_UART_PAD_CTRL) #define MX50_PAD_SSI_RXFS__WEIM_D6 IOMUX_PAD(0x328, 0x7C, 3, 0x804, 0, NO_PAD_CTRL) #define MX50_PAD_SSI_RXFS__CSPI_SS2 IOMUX_PAD(0x328, 0x7C, 4, 0x6f0, 0, MX50_CSPI_SS_PAD) #define MX50_PAD_SSI_RXFS__FEC_COL IOMUX_PAD(0x328, 0x7C, 5, 0x770, 0, PAD_CTL_DSE_HIGH) @@ -186,25 +186,25 @@ #define MX50_PAD_SSI_RXC__FEC_RX_CLK IOMUX_PAD(0x32C, 0x80, 5, 0x780, 0, NO_PAD_CTRL) #define MX50_PAD_SSI_RXC__FEC_MDIO IOMUX_PAD(0x32C, 0x80, 6, 0x774, 1, MX50_FEC_PAD_CTRL) -#define MX50_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x330, 0x84, 0, 0x7c4, 0, MX50_UART_PAD_CTRL) +#define MX50_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x330, 0x84, 0, 0x0, 0, MX50_UART_PAD_CTRL) #define MX50_PAD_UART1_TXD__GPIO_6_6 IOMUX_PAD(0x330, 0x84, 1, 0x0, 0, NO_PAD_CTRL) #define MX50_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x334, 0x88, 0, 0x7c4, 1, MX50_UART_PAD_CTRL) #define MX50_PAD_UART1_RXD__GPIO_6_7 IOMUX_PAD(0x334, 0x88, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_UART1_CTS__UART1_CTS IOMUX_PAD(0x338, 0x8C, 0, 0x7c0, 0, MX50_UART_PAD_CTRL) +#define MX50_PAD_UART1_CTS__UART1_CTS IOMUX_PAD(0x338, 0x8C, 0, 0x0, 0, MX50_UART_PAD_CTRL) #define MX50_PAD_UART1_CTS__GPIO_6_8 IOMUX_PAD(0x338, 0x8C, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_UART1_CTS__UART5_TXD IOMUX_PAD(0x338, 0x8C, 2, 0x7e4, 2, MX50_UART_PAD_CTRL) +#define MX50_PAD_UART1_CTS__UART5_TXD IOMUX_PAD(0x338, 0x8C, 2, 0x0, 0, MX50_UART_PAD_CTRL) #define MX50_PAD_UART1_CTS__SD4_D4 IOMUX_PAD(0x338, 0x8C, 4, 0x760, 0, MX50_SD_PAD_CTRL) #define MX50_PAD_UART1_CTS__SD4_CMD IOMUX_PAD(0x338, 0x8C, 5, 0x74c, 0, MX50_SD_PAD_CTRL) #define MX50_PAD_UART1_RTS__UART1_RTS IOMUX_PAD(0x33C, 0x90, 0, 0x7c0, 1, MX50_UART_PAD_CTRL) #define MX50_PAD_UART1_RTS__GPIO_6_9 IOMUX_PAD(0x33C, 0x90, 1, 0x0, 0, NO_PAD_CTRL) #define MX50_PAD_UART1_RTS__UART5_RXD IOMUX_PAD(0x33C, 0x90, 2, 0x7e4, 3, MX50_UART_PAD_CTRL) -#define MX50_PAD_UART1_RTS__SD4_D5 IOMUX_PAD(0x33C, 0x90, 4, 0x0, 1, MX50_SD_PAD_CTRL) -#define MX50_PAD_UART1_RTS__SD4_CLK IOMUX_PAD(0x33C, 0x90, 5, 0x0, 1, MX50_SD_PAD_CTRL) +#define MX50_PAD_UART1_RTS__SD4_D5 IOMUX_PAD(0x33C, 0x90, 4, 0x764, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_UART1_RTS__SD4_CLK IOMUX_PAD(0x33C, 0x90, 5, 0x748, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x340, 0x94, 0, 0x7cc, 2, MX50_UART_PAD_CTRL) +#define MX50_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x340, 0x94, 0, 0x0, 0, MX50_UART_PAD_CTRL) #define MX50_PAD_UART2_TXD__GPIO_6_10 IOMUX_PAD(0x340, 0x94, 1, 0x0, 0, NO_PAD_CTRL) #define MX50_PAD_UART2_TXD__SD4_D6 IOMUX_PAD(0x340, 0x94, 4, 0x768, 0, MX50_SD_PAD_CTRL) #define MX50_PAD_UART2_TXD__SD4_D4 IOMUX_PAD(0x340, 0x94, 5, 0x760, 1, MX50_SD_PAD_CTRL) @@ -214,7 +214,7 @@ #define MX50_PAD_UART2_RXD__SD4_D7 IOMUX_PAD(0x344, 0x98, 4, 0x76c, 0, MX50_SD_PAD_CTRL) #define MX50_PAD_UART2_RXD__SD4_D5 IOMUX_PAD(0x344, 0x98, 5, 0x764, 1, MX50_SD_PAD_CTRL) -#define MX50_PAD_UART2_CTS__UART2_CTS IOMUX_PAD(0x348, 0x9C, 0, 0x7c8, 2, MX50_UART_PAD_CTRL) +#define MX50_PAD_UART2_CTS__UART2_CTS IOMUX_PAD(0x348, 0x9C, 0, 0x0, 0, MX50_UART_PAD_CTRL) #define MX50_PAD_UART2_CTS__GPIO_6_12 IOMUX_PAD(0x348, 0x9C, 1, 0x0, 0, NO_PAD_CTRL) #define MX50_PAD_UART2_CTS__SD4_CMD IOMUX_PAD(0x348, 0x9C, 4, 0x74c, 1, MX50_SD_PAD_CTRL) #define MX50_PAD_UART2_CTS__SD4_D6 IOMUX_PAD(0x348, 0x9C, 5, 0x768, 1, MX50_SD_PAD_CTRL) @@ -224,7 +224,7 @@ #define MX50_PAD_UART2_RTS__SD4_CLK IOMUX_PAD(0x34C, 0xA0, 4, 0x748, 1, MX50_SD_PAD_CTRL) #define MX50_PAD_UART2_RTS__SD4_D7 IOMUX_PAD(0x34C, 0xA0, 5, 0x76c, 1, MX50_SD_PAD_CTRL) -#define MX50_PAD_UART3_TXD__UART3_TXD IOMUX_PAD(0x350, 0xA4, 0, 0x7d4, 0, MX50_UART_PAD_CTRL) +#define MX50_PAD_UART3_TXD__UART3_TXD IOMUX_PAD(0x350, 0xA4, 0, 0x0, 0, MX50_UART_PAD_CTRL) #define MX50_PAD_UART3_TXD__GPIO_6_14 IOMUX_PAD(0x350, 0xA4, 1, 0x0, 0, NO_PAD_CTRL) #define MX50_PAD_UART3_TXD__SD1_D4 IOMUX_PAD(0x350, 0xA4, 3, 0x0, 0, MX50_SD_PAD_CTRL) #define MX50_PAD_UART3_TXD__SD4_D0 IOMUX_PAD(0x350, 0xA4, 4, 0x750, 0, MX50_SD_PAD_CTRL) @@ -238,9 +238,9 @@ #define MX50_PAD_UART3_RXD__SD2_CD IOMUX_PAD(0x354, 0xA8, 5, 0x740, 0, MX50_SD_PAD_CTRL) #define MX50_PAD_UART3_RXD__WEIM_D13 IOMUX_PAD(0x354, 0xA8, 6, 0x820, 0, NO_PAD_CTRL) -#define MX50_PAD_UART4_TXD__UART4_TXD IOMUX_PAD(0x358, 0xAC, 0, 0x7dc, 0, MX50_UART_PAD_CTRL) +#define MX50_PAD_UART4_TXD__UART4_TXD IOMUX_PAD(0x358, 0xAC, 0, 0x0, 0, MX50_UART_PAD_CTRL) #define MX50_PAD_UART4_TXD__GPIO_6_16 IOMUX_PAD(0x358, 0xAC, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_UART4_TXD__UART3_CTS IOMUX_PAD(0x358, 0xAC, 2, 0x7d0, 0, MX50_UART_PAD_CTRL) +#define MX50_PAD_UART4_TXD__UART3_CTS IOMUX_PAD(0x358, 0xAC, 2, 0x0, 0, MX50_UART_PAD_CTRL) #define MX50_PAD_UART4_TXD__SD1_D6 IOMUX_PAD(0x358, 0xAC, 3, 0x0, 0, MX50_SD_PAD_CTRL) #define MX50_PAD_UART4_TXD__SD4_D2 IOMUX_PAD(0x358, 0xAC, 4, 0x758, 0, MX50_SD_PAD_CTRL) #define MX50_PAD_UART4_TXD__SD2_LCTL IOMUX_PAD(0x358, 0xAC, 5, 0x0, 0, MX50_SD_PAD_CTRL) @@ -278,7 +278,7 @@ #define MX50_PAD_ECSPI1_MOSI__GPIO_4_13 IOMUX_PAD(0x374, 0xC8, 1, 0x0, 0, NO_PAD_CTRL) #define MX50_PAD_ECSPI1_MOSI__CSPI_SS1 IOMUX_PAD(0x374, 0xC8, 2, 0x6ec, 1, MX50_CSPI_SS_PAD) #define MX50_PAD_ECSPI1_MOSI__ECSPI2_SS1 IOMUX_PAD(0x374, 0xC8, 3, 0x0, 0, MX50_CSPI_SS_PAD) -#define MX50_PAD_ECSPI1_MOSI__UART3_CTS IOMUX_PAD(0x374, 0xC8, 4, 0x7d0, 3, MX50_UART_PAD_CTRL) +#define MX50_PAD_ECSPI1_MOSI__UART3_CTS IOMUX_PAD(0x374, 0xC8, 4, 0x0, 0, MX50_UART_PAD_CTRL) #define MX50_PAD_ECSPI1_MOSI__EPDC_SDCE7 IOMUX_PAD(0x374, 0xC8, 5, 0x0, 0, NO_PAD_CTRL) #define MX50_PAD_ECSPI1_MOSI__WEIM_D9 IOMUX_PAD(0x374, 0xC8, 7, 0x810, 0, NO_PAD_CTRL) @@ -294,7 +294,7 @@ #define MX50_PAD_ECSPI1_SS0__GPIO_4_15 IOMUX_PAD(0x37C, 0xD0, 1, 0x0, 0, PAD_CTL_PUS_100K_UP) #define MX50_PAD_ECSPI1_SS0__CSPI_SS3 IOMUX_PAD(0x37C, 0xD0, 2, 0x6f4, 1, MX50_CSPI_SS_PAD) #define MX50_PAD_ECSPI1_SS0__ECSPI2_SS3 IOMUX_PAD(0x37C, 0xD0, 3, 0x0, 0, MX50_CSPI_SS_PAD) -#define MX50_PAD_ECSPI1_SS0__UART4_CTS IOMUX_PAD(0x37C, 0xD0, 4, 0x7d8, 1, MX50_UART_PAD_CTRL) +#define MX50_PAD_ECSPI1_SS0__UART4_CTS IOMUX_PAD(0x37C, 0xD0, 4, 0x0, 0, MX50_UART_PAD_CTRL) #define MX50_PAD_ECSPI1_SS0__EPDC_SDCE9 IOMUX_PAD(0x37C, 0xD0, 5, 0x0, 0, NO_PAD_CTRL) #define MX50_PAD_ECSPI1_SS0__WEIM_D11 IOMUX_PAD(0x37C, 0xD0, 7, 0x818, 0, NO_PAD_CTRL) @@ -311,17 +311,17 @@ #define MX50_PAD_ECSPI2_MOSI__GPIO_4_17 IOMUX_PAD(0x384, 0xD8, 1, 0x0, 0, NO_PAD_CTRL) #define MX50_PAD_ECSPI2_MOSI__ELCDIF_RD IOMUX_PAD(0x384, 0xD8, 2, 0x0, 0, NO_PAD_CTRL) #define MX50_PAD_ECSPI2_MOSI__ECSPI1_SS1 IOMUX_PAD(0x384, 0xD8, 3, 0x0, 0, MX50_CSPI_SS_PAD) -#define MX50_PAD_ECSPI2_MOSI__UART5_CTS IOMUX_PAD(0x384, 0xD8, 4, 0x7e0, 1, MX50_UART_PAD_CTRL) +#define MX50_PAD_ECSPI2_MOSI__UART5_CTS IOMUX_PAD(0x384, 0xD8, 4, 0x0, 0, MX50_UART_PAD_CTRL) #define MX50_PAD_ECSPI2_MOSI__ELCDIF_EN IOMUX_PAD(0x384, 0xD8, 5, 0x0, 0, NO_PAD_CTRL) #define MX50_PAD_ECSPI2_MOSI__NANDF_CEN5 IOMUX_PAD(0x384, 0xD8, 6, 0x0, 0, NO_PAD_CTRL) #define MX50_PAD_ECSPI2_MOSI__WEIM_D9 IOMUX_PAD(0x384, 0xD8, 7, 0x810, 1, NO_PAD_CTRL) -#define MX50_PAD_ECSPI2_MISO__ECSPI2_MISO IOMUX_PAD(0x388, 0xDC, 0, 0x73c, 0, NO_PAD_CTRL) +#define MX50_PAD_ECSPI2_MISO__ECSPI2_MISO IOMUX_PAD(0x388, 0xDC, 0, 0x0, 0, NO_PAD_CTRL) #define MX50_PAD_ECSPI2_MISO__GPIO_4_18 IOMUX_PAD(0x388, 0xDC, 1, 0x0, 0, PAD_CTL_PUS_100K_UP) #define MX50_PAD_ECSPI2_MISO__ELCDIF_RS IOMUX_PAD(0x388, 0xDC, 2, 0x0, 0, NO_PAD_CTRL) #define MX50_PAD_ECSPI2_MISO__ECSPI1_SS2 IOMUX_PAD(0x388, 0xDC, 3, 0x0, 0, MX50_CSPI_SS_PAD) -#define MX50_PAD_ECSPI2_MISO__UART5_TXD IOMUX_PAD(0x388, 0xDC, 4, 0x7e4, 4, MX50_UART_PAD_CTRL) -#define MX50_PAD_ECSPI2_MISO__ELCDIF_VSYNC IOMUX_PAD(0x388, 0xDC, 5, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_ECSPI2_MISO__UART5_TXD IOMUX_PAD(0x388, 0xDC, 4, 0x0, 0, MX50_UART_PAD_CTRL) +#define MX50_PAD_ECSPI2_MISO__ELCDIF_VSYNC IOMUX_PAD(0x388, 0xDC, 5, 0x73c, 0, NO_PAD_CTRL) #define MX50_PAD_ECSPI2_MISO__NANDF_CEN6 IOMUX_PAD(0x388, 0xDC, 6, 0x0, 0, NO_PAD_CTRL) #define MX50_PAD_ECSPI2_MISO__WEIM_D10 IOMUX_PAD(0x388, 0xDC, 7, 0x814, 1, NO_PAD_CTRL) @@ -503,7 +503,7 @@ #define MX50_PAD_DISP_RD__ELCDIF_EN IOMUX_PAD(0x430, 0x150, 2, 0x0, 0, MX50_ELCDIF_PAD_CTRL) #define MX50_PAD_DISP_RD__WEIM_A25 IOMUX_PAD(0x430, 0x150, 3, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_DISP_RS__ELCDIF_RS IOMUX_PAD(0x434, 0x154, 0, 0x73c, 1, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_DISP_RS__ELCDIF_RS IOMUX_PAD(0x434, 0x154, 0, 0x0, 0, MX50_ELCDIF_PAD_CTRL) #define MX50_PAD_DISP_RS__GPIO_2_17 IOMUX_PAD(0x434, 0x154, 1, 0x0, 0, NO_PAD_CTRL) #define MX50_PAD_DISP_RS__ELCDIF_VSYNC IOMUX_PAD(0x434, 0x154, 2, 0x73c, 1, MX50_ELCDIF_PAD_CTRL) #define MX50_PAD_DISP_RS__WEIM_A26 IOMUX_PAD(0x434, 0x154, 3, 0x0, 0, NO_PAD_CTRL) @@ -691,8 +691,8 @@ #define MX50_PAD_EPDC_D9__EPDC_D9 IOMUX_PAD(0x570, 0x1D4, 0, 0x0, 0, NO_PAD_CTRL) #define MX50_PAD_EPDC_D9__GPIO_3_9 IOMUX_PAD(0x570, 0x1D4, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D9__WEIM_D9 IOMUX_PAD(0x570, 0x1D4, 2, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D9__ELCDIF_D25 IOMUX_PAD(0x570, 0x1D4, 3, 0x810, 2, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_EPDC_D9__WEIM_D9 IOMUX_PAD(0x570, 0x1D4, 2, 0x810, 2, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D9__ELCDIF_D25 IOMUX_PAD(0x570, 0x1D4, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL) #define MX50_PAD_EPDC_D10__EPDC_D10 IOMUX_PAD(0x574, 0x1D8, 0, 0x0, 0, NO_PAD_CTRL) #define MX50_PAD_EPDC_D10__GPIO_3_10 IOMUX_PAD(0x574, 0x1D8, 1, 0x0, 0, NO_PAD_CTRL) -- cgit v1.2.3-18-g5258 From ee896e348cf6f323a00e4ee52e6386f515f86cee Mon Sep 17 00:00:00 2001 From: Hema HK Date: Thu, 17 Feb 2011 12:06:07 +0530 Subject: usb: otg: OMAP4430: Introducing suspend function for power management Introduced the suspend/resume function for the OMAP4430 internal PHY. This will be used by the twl6030-usb transceiver driver. Moved the clock enable/disable function calls and power on/off of the PHY code from power on/off functions to suspend/resume function. Pass the suspend function through board data for OMAP4430sdp and OMAP4panda. This will be used by the twl6030-usb transceiver driver. Signed-off-by: Hema HK Cc: Tony Lindgren Cc: Paul Walmsley Signed-off-by: Felipe Balbi --- arch/arm/mach-omap2/board-4430sdp.c | 1 + arch/arm/mach-omap2/board-omap4panda.c | 1 + arch/arm/mach-omap2/omap_phy_internal.c | 22 +++++++++++++++------- arch/arm/plat-omap/include/plat/usb.h | 1 + 4 files changed, 18 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 07d1b20b114..9cf8e333255 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -272,6 +272,7 @@ static struct twl4030_usb_data omap4_usbphy_data = { .phy_exit = omap4430_phy_exit, .phy_power = omap4430_phy_power, .phy_set_clock = omap4430_phy_set_clk, + .phy_suspend = omap4430_phy_suspend, }; static struct omap2_hsmmc_info mmc[] = { diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index e944025d5ef..77748f81366 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -153,6 +153,7 @@ static struct twl4030_usb_data omap4_usbphy_data = { .phy_exit = omap4430_phy_exit, .phy_power = omap4430_phy_power, .phy_set_clock = omap4430_phy_set_clk, + .phy_suspend = omap4430_phy_suspend, }; static struct omap2_hsmmc_info mmc[] = { diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index 745252c60e3..3ce675899fc 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -103,13 +103,6 @@ int omap4430_phy_set_clk(struct device *dev, int on) int omap4430_phy_power(struct device *dev, int ID, int on) { if (on) { - /* enabled the clocks */ - omap4430_phy_set_clk(dev, 1); - /* power on the phy */ - if (__raw_readl(ctrl_base + CONTROL_DEV_CONF) & PHY_PD) { - __raw_writel(~PHY_PD, ctrl_base + CONTROL_DEV_CONF); - mdelay(200); - } if (ID) /* enable VBUS valid, IDDIG groung */ __raw_writel(AVALID | VBUSVALID, ctrl_base + @@ -125,10 +118,25 @@ int omap4430_phy_power(struct device *dev, int ID, int on) /* Enable session END and IDIG to high impedence. */ __raw_writel(SESSEND | IDDIG, ctrl_base + USBOTGHS_CONTROL); + } + return 0; +} + +int omap4430_phy_suspend(struct device *dev, int suspend) +{ + if (suspend) { /* Disable the clocks */ omap4430_phy_set_clk(dev, 0); /* Power down the phy */ __raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF); + } else { + /* Enable the internel phy clcoks */ + omap4430_phy_set_clk(dev, 1); + /* power on the phy */ + if (__raw_readl(ctrl_base + CONTROL_DEV_CONF) & PHY_PD) { + __raw_writel(~PHY_PD, ctrl_base + CONTROL_DEV_CONF); + mdelay(200); + } } return 0; diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index 450a332f100..f888e0e57dc 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -88,6 +88,7 @@ extern int omap4430_phy_power(struct device *dev, int ID, int on); extern int omap4430_phy_set_clk(struct device *dev, int on); extern int omap4430_phy_init(struct device *dev); extern int omap4430_phy_exit(struct device *dev); +extern int omap4430_phy_suspend(struct device *dev, int suspend); #endif -- cgit v1.2.3-18-g5258 From 55cb8cd45e0600df1473489518d7f12ce1bbe973 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Wed, 16 Feb 2011 13:43:04 -0500 Subject: pci/xen: Use xen_allocate_pirq_msi instead of xen_allocate_pirq xen_allocate_pirq -> xen_map_pirq_gsi -> PHYSDEVOP_alloc_irq_vector IFF xen_initial_domain() in addition to the kernel side book-keeping side of things (set chip and handler, update irq_info etc) whereas xen_allocate_pirq_msi just does the kernel book keeping. Also xen_allocate_pirq allocates an IRQ in the 1-1 GSI space whereas xen_allocate_pirq_msi allocates a dynamic one in the >GSI IRQ space. All of this is uneccessary as this code path is only executed when we run as a domU PV guest with an MSI/MSI-X PCI card passed in. Hence we can jump straight to allocating an dynamic IRQ (and binding it to the proper PIRQ) and skip the rest. In short: this change is a cosmetic one. Reviewed-by: Ian Campbell Reviewed-by: Stefano Stabellini Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/pci/xen.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c index 25cd4a07d09..6432f751ee4 100644 --- a/arch/x86/pci/xen.c +++ b/arch/x86/pci/xen.c @@ -157,14 +157,14 @@ static int xen_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) goto error; i = 0; list_for_each_entry(msidesc, &dev->msi_list, list) { - irq = xen_allocate_pirq(v[i], 0, /* not sharable */ + xen_allocate_pirq_msi( (type == PCI_CAP_ID_MSIX) ? - "pcifront-msi-x" : "pcifront-msi"); + "pcifront-msi-x" : "pcifront-msi", + &irq, &v[i], XEN_ALLOC_IRQ); if (irq < 0) { ret = -1; goto free; } - ret = set_irq_msi(irq, msidesc); if (ret) goto error_while; -- cgit v1.2.3-18-g5258 From 13884c6680973f0ce3483dc59b636b4962d6dafe Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Fri, 17 Dec 2010 16:33:53 +0100 Subject: x86/pci: Remove unused variable |arch/x86/pci/ce4100.c: In function `ce4100_conf_read': |arch/x86/pci/ce4100.c:257:9: warning: unused variable `retval' Signed-off-by: Sebastian Andrzej Siewior Cc: dirk.brandewie@gmail.com LKML-Reference: <1292600033-12271-16-git-send-email-bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner --- arch/x86/pci/ce4100.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/pci/ce4100.c b/arch/x86/pci/ce4100.c index 85b68ef5e80..c63c6d3dd8e 100644 --- a/arch/x86/pci/ce4100.c +++ b/arch/x86/pci/ce4100.c @@ -254,7 +254,7 @@ int bridge_read(unsigned int devfn, int reg, int len, u32 *value) static int ce4100_conf_read(unsigned int seg, unsigned int bus, unsigned int devfn, int reg, int len, u32 *value) { - int i, retval = 1; + int i; if (bus == 1) { for (i = 0; i < ARRAY_SIZE(bus1_fixups); i++) { -- cgit v1.2.3-18-g5258 From cc0f89c4a426fcd6400a89e9e34e4a8851abef76 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Thu, 17 Feb 2011 12:02:23 -0500 Subject: pci/xen: Cleanup: convert int** to int[] Cleanup code. Cosmetic change to make the code look easier to read. Reviewed-by: Ian Campbell Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/include/asm/xen/pci.h | 8 ++++---- arch/x86/pci/xen.c | 4 ++-- 2 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/xen/pci.h b/arch/x86/include/asm/xen/pci.h index 2329b3eaf8d..aa862098916 100644 --- a/arch/x86/include/asm/xen/pci.h +++ b/arch/x86/include/asm/xen/pci.h @@ -27,16 +27,16 @@ static inline void __init xen_setup_pirqs(void) * its own functions. */ struct xen_pci_frontend_ops { - int (*enable_msi)(struct pci_dev *dev, int **vectors); + int (*enable_msi)(struct pci_dev *dev, int vectors[]); void (*disable_msi)(struct pci_dev *dev); - int (*enable_msix)(struct pci_dev *dev, int **vectors, int nvec); + int (*enable_msix)(struct pci_dev *dev, int vectors[], int nvec); void (*disable_msix)(struct pci_dev *dev); }; extern struct xen_pci_frontend_ops *xen_pci_frontend; static inline int xen_pci_frontend_enable_msi(struct pci_dev *dev, - int **vectors) + int vectors[]) { if (xen_pci_frontend && xen_pci_frontend->enable_msi) return xen_pci_frontend->enable_msi(dev, vectors); @@ -48,7 +48,7 @@ static inline void xen_pci_frontend_disable_msi(struct pci_dev *dev) xen_pci_frontend->disable_msi(dev); } static inline int xen_pci_frontend_enable_msix(struct pci_dev *dev, - int **vectors, int nvec) + int vectors[], int nvec) { if (xen_pci_frontend && xen_pci_frontend->enable_msix) return xen_pci_frontend->enable_msix(dev, vectors, nvec); diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c index 6432f751ee4..30fdd09dea0 100644 --- a/arch/x86/pci/xen.c +++ b/arch/x86/pci/xen.c @@ -150,9 +150,9 @@ static int xen_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) return -ENOMEM; if (type == PCI_CAP_ID_MSIX) - ret = xen_pci_frontend_enable_msix(dev, &v, nvec); + ret = xen_pci_frontend_enable_msix(dev, v, nvec); else - ret = xen_pci_frontend_enable_msi(dev, &v); + ret = xen_pci_frontend_enable_msi(dev, v); if (ret) goto error; i = 0; -- cgit v1.2.3-18-g5258 From 3d74a539ae07a8f3c061332e426fc07b2310cf05 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Thu, 17 Feb 2011 16:12:51 -0500 Subject: pci/xen: When free-ing MSI-X/MSI irq->desc also use generic code. This code path is only run when an MSI/MSI-X PCI device is passed in to PV DomU. In 2.6.37 time-frame we over-wrote the default cleanup handler for MSI/MSI-X irq->desc to be "xen_teardown_msi_irqs". That function calls the the xen-pcifront driver which can tell the backend to cleanup/take back the MSI/MSI-X device. However, we forgot to continue the process of free-ing the MSI/MSI-X device resources (irq->desc) in the PV domU side. Which is what the default cleanup handler: default_teardown_msi_irqs did. Hence we would leak IRQ descriptors. Without this patch, doing "rmmod igbvf;modprobe igbvf" multiple times ends with abandoned IRQ descriptors: 28: 5 xen-pirq-pcifront-msi-x 29: 8 xen-pirq-pcifront-msi-x ... 130: 10 xen-pirq-pcifront-msi-x with the end result of running out of IRQ descriptors. Reviewed-by: Ian Campbell Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/pci/xen.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c index 30fdd09dea0..57afd1da491 100644 --- a/arch/x86/pci/xen.c +++ b/arch/x86/pci/xen.c @@ -193,6 +193,9 @@ static void xen_teardown_msi_irqs(struct pci_dev *dev) xen_pci_frontend_disable_msix(dev); else xen_pci_frontend_disable_msi(dev); + + /* Free the IRQ's and the msidesc using the generic code. */ + default_teardown_msi_irqs(dev); } static void xen_teardown_msi_irq(unsigned int irq) -- cgit v1.2.3-18-g5258 From 5df91509d324d44cfb11e55d9cb02fe18b53b045 Mon Sep 17 00:00:00 2001 From: "jacob.jun.pan@linux.intel.com" Date: Fri, 18 Feb 2011 13:42:54 -0800 Subject: x86: mrst: Remove apb timer read workaround APB timer current count was unreliable in the earlier silicon, which could result in time going backwards. This problem has been fixed in the current silicon stepping. This patch removes the workaround which was used to check and prevent timer rolling back when APB timer is used as clocksource device. The workaround code was also flawed by potential race condition around the cached read value last_read. Though a fix can be done by assigning last_read to a local variable at the beginning of apbt_read_clocksource(), but this is not necessary anymore. [ tglx: A sane timer on an Intel chip - I can't believe it ] Signed-off-by: Jacob Pan Cc: Arjan van de Ven Cc: Alan Cox LKML-Reference: <1298065374-25532-1-git-send-email-jacob.jun.pan@linux.intel.com> Signed-off-by: Thomas Gleixner --- arch/x86/kernel/apb_timer.c | 60 +++------------------------------------------ 1 file changed, 4 insertions(+), 56 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c index 7c9ab59653e..afc406498c9 100644 --- a/arch/x86/kernel/apb_timer.c +++ b/arch/x86/kernel/apb_timer.c @@ -506,64 +506,12 @@ static int apbt_next_event(unsigned long delta, return 0; } -/* - * APB timer clock is not in sync with pclk on Langwell, which translates to - * unreliable read value caused by sampling error. the error does not add up - * overtime and only happens when sampling a 0 as a 1 by mistake. so the time - * would go backwards. the following code is trying to prevent time traveling - * backwards. little bit paranoid. - */ static cycle_t apbt_read_clocksource(struct clocksource *cs) { - unsigned long t0, t1, t2; - static unsigned long last_read; - -bad_count: - t1 = apbt_readl(phy_cs_timer_id, - APBTMR_N_CURRENT_VALUE); - t2 = apbt_readl(phy_cs_timer_id, - APBTMR_N_CURRENT_VALUE); - if (unlikely(t1 < t2)) { - pr_debug("APBT: read current count error %lx:%lx:%lx\n", - t1, t2, t2 - t1); - goto bad_count; - } - /* - * check against cached last read, makes sure time does not go back. - * it could be a normal rollover but we will do tripple check anyway - */ - if (unlikely(t2 > last_read)) { - /* check if we have a normal rollover */ - unsigned long raw_intr_status = - apbt_readl_reg(APBTMRS_RAW_INT_STATUS); - /* - * cs timer interrupt is masked but raw intr bit is set if - * rollover occurs. then we read EOI reg to clear it. - */ - if (raw_intr_status & (1 << phy_cs_timer_id)) { - apbt_readl(phy_cs_timer_id, APBTMR_N_EOI); - goto out; - } - pr_debug("APB CS going back %lx:%lx:%lx ", - t2, last_read, t2 - last_read); -bad_count_x3: - pr_debug("triple check enforced\n"); - t0 = apbt_readl(phy_cs_timer_id, - APBTMR_N_CURRENT_VALUE); - udelay(1); - t1 = apbt_readl(phy_cs_timer_id, - APBTMR_N_CURRENT_VALUE); - udelay(1); - t2 = apbt_readl(phy_cs_timer_id, - APBTMR_N_CURRENT_VALUE); - if ((t2 > t1) || (t1 > t0)) { - printk(KERN_ERR "Error: APB CS tripple check failed\n"); - goto bad_count_x3; - } - } -out: - last_read = t2; - return (cycle_t)~t2; + unsigned long current_count; + + current_count = apbt_readl(phy_cs_timer_id, APBTMR_N_CURRENT_VALUE); + return (cycle_t)~current_count; } static int apbt_clocksource_register(void) -- cgit v1.2.3-18-g5258 From ee1b06ea6aed979da3b4e6b6ffea98ad55a3c5c1 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Fri, 18 Feb 2011 15:47:42 -0800 Subject: x86, reboot: Fix the use of passed arguments in 32-bit BIOS reboot The initial version of this patch had %eax being a segment and %ecx being the mode. I had changed the interfaces, but not the actual implementation! Reported-by: Brian Gerst LKML-Reference: Cc: Stephen Rothwell Cc: Rafael J. Wysocki Cc: Matthieu Castet --- arch/x86/kernel/reboot_32.S | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/reboot_32.S b/arch/x86/kernel/reboot_32.S index f242356a096..29092b38d81 100644 --- a/arch/x86/kernel/reboot_32.S +++ b/arch/x86/kernel/reboot_32.S @@ -23,10 +23,14 @@ r_base = . 1: popl %ebx subl $1b, %ebx + /* Compute the equivalent real-mode segment */ + movl %ebx, %ecx + shrl $4, %ecx + /* Patch post-real-mode segment jump */ - movw dispatch_table(%ebx,%ecx,2),%cx - movw %cx, 101f(%ebx) - movw %ax, 102f(%ebx) + movw dispatch_table(%ebx,%eax,2),%ax + movw %ax, 101f(%ebx) + movw %cx, 102f(%ebx) /* Set up the IDT for real mode. */ lidtl machine_real_restart_idt(%ebx) -- cgit v1.2.3-18-g5258 From 1c4badbdeae53d2584bb5395a062cfebed76696e Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Fri, 18 Feb 2011 15:50:36 -0800 Subject: x86-64, trampoline: Remove unused variable Removed unused variable left over from development. Reported-by: Brian Gerst LKML-Reference: Cc: Stephen Rothwell Cc: Rafael J. Wysocki Cc: Matthieu Castet --- arch/x86/kernel/trampoline_64.S | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/trampoline_64.S b/arch/x86/kernel/trampoline_64.S index 49c77a68252..09ff51799e9 100644 --- a/arch/x86/kernel/trampoline_64.S +++ b/arch/x86/kernel/trampoline_64.S @@ -157,8 +157,6 @@ startup_64_vector: .word __KERNEL_CS, 0 .balign 4 -fixup_base: - .long 0 ENTRY(trampoline_status) .long 0 -- cgit v1.2.3-18-g5258 From ad56c0dd9dfb0175e605b5e66b3f9973bef60ca0 Mon Sep 17 00:00:00 2001 From: Ryan Mallon Date: Mon, 14 Feb 2011 03:44:22 +0100 Subject: ARM: 6664/1: AT91: Use macros for gpio_to_irq/irq_to_gpio Replace the static inline functions for gpio_to_irq/irq_to_gpio so that they can be used in static initialisers. Signed-off-by: Ryan Mallon Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Russell King --- arch/arm/mach-at91/include/mach/gpio.h | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h index bfdd8ab26dc..ddeb6453675 100644 --- a/arch/arm/mach-at91/include/mach/gpio.h +++ b/arch/arm/mach-at91/include/mach/gpio.h @@ -220,15 +220,8 @@ extern void at91_gpio_resume(void); #define gpio_set_value __gpio_set_value #define gpio_cansleep __gpio_cansleep -static inline int gpio_to_irq(unsigned gpio) -{ - return gpio; -} - -static inline int irq_to_gpio(unsigned irq) -{ - return irq; -} +#define gpio_to_irq(gpio) (gpio) +#define irq_to_gpio(irq) (irq) #endif /* __ASSEMBLY__ */ -- cgit v1.2.3-18-g5258 From d081377dfda42beab13d8b4af876571ce7661174 Mon Sep 17 00:00:00 2001 From: Ryan Mallon Date: Mon, 14 Feb 2011 03:46:42 +0100 Subject: ARM: 6665/1: Add Snapper9260 rtc wakeup interrupt pin Signed-off-by: Ryan Mallon Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Russell King --- arch/arm/mach-at91/board-snapper9260.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c index 0a99b3cedd7..17f7d9b3214 100644 --- a/arch/arm/mach-at91/board-snapper9260.c +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -153,6 +153,7 @@ static struct i2c_board_info __initdata snapper9260_i2c_devices[] = { { /* RTC */ I2C_BOARD_INFO("isl1208", 0x6f), + .irq = gpio_to_irq(AT91_PIN_PA31), }, }; -- cgit v1.2.3-18-g5258 From 68b5035c8e4ed9eb449121a0603d6299a489618c Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 28 Jan 2011 09:08:41 +0100 Subject: ARM: 6644/1: mach-ux500: update the U8500 defconfig Config and activate all the devices we've merged for Ux500 in 2.6.38-rc1. This is needed for the default config to compile properly. Signed-off-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/configs/u8500_defconfig | 59 ++++++++++++++++++++++++++++++++++------ 1 file changed, 51 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 52d86c4485b..a5cce242a77 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -1,7 +1,6 @@ CONFIG_EXPERIMENTAL=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y -CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y CONFIG_KALLSYMS_ALL=y CONFIG_MODULES=y @@ -13,43 +12,89 @@ CONFIG_UX500_SOC_DB5500=y CONFIG_UX500_SOC_DB8500=y CONFIG_MACH_U8500=y CONFIG_MACH_U5500=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_SMP=y CONFIG_NR_CPUS=2 +CONFIG_HOTPLUG_CPU=y CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8" +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_VFP=y CONFIG_NEON=y +CONFIG_NET=y +CONFIG_PHONET=y +CONFIG_PHONET_PIPECTRLR=y +# CONFIG_WIRELESS is not set +CONFIG_CAIF=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=65536 -# CONFIG_MISC_DEVICES is not set +CONFIG_MISC_DEVICES=y +CONFIG_AB8500_PWM=y +CONFIG_SENSORS_BH1780=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_NOMADIK=y +CONFIG_KEYBOARD_STMPE=y +CONFIG_KEYBOARD_TC3589X=y # CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_BU21013=y +CONFIG_INPUT_MISC=y +CONFIG_INPUT_AB8500_PONKEY=y # CONFIG_SERIO is not set CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y # CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_NOMADIK=y +CONFIG_I2C=y +CONFIG_I2C_NOMADIK=y CONFIG_SPI=y CONFIG_SPI_PL022=y +CONFIG_GPIO_STMPE=y +CONFIG_GPIO_TC3589X=y # CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set +CONFIG_MFD_STMPE=y +CONFIG_MFD_TC3589X=y +CONFIG_AB8500_CORE=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_AB8500=y # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +CONFIG_MMC_ARMMMCI=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_LP5521=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_AB8500=y +CONFIG_RTC_DRV_PL031=y +CONFIG_DMADEVICES=y +CONFIG_STE_DMA40=y +CONFIG_STAGING=y +# CONFIG_STAGING_EXCLUDE_BUILD is not set +CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y -CONFIG_INOTIFY=y +CONFIG_EXT3_FS=y +CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_CONFIGFS_FS=m # CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_PREEMPT is not set @@ -58,5 +103,3 @@ CONFIG_DEBUG_INFO=y # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y -CONFIG_CRC_T10DIF=m -# CONFIG_CRC32 is not set -- cgit v1.2.3-18-g5258 From bafc8205dc7bf2488175008deedc14ff4939d174 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 2 Feb 2011 13:49:00 +0100 Subject: ARM: 6647/1: add Versatile Express defconfig Being able to compile a major reference platform is helpful for me when developing on other archs using the same e.g. PrimeCells. I bet this is useful to others as well. Signed-off-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/configs/vexpress_defconfig | 140 ++++++++++++++++++++++++++++++++++++ 1 file changed, 140 insertions(+) create mode 100644 arch/arm/configs/vexpress_defconfig (limited to 'arch') diff --git a/arch/arm/configs/vexpress_defconfig b/arch/arm/configs/vexpress_defconfig new file mode 100644 index 00000000000..f2de51f0bd1 --- /dev/null +++ b/arch/arm/configs/vexpress_defconfig @@ -0,0 +1,140 @@ +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SYSVIPC=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_CGROUPS=y +CONFIG_CPUSETS=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_PROFILING=y +CONFIG_OPROFILE=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_VEXPRESS=y +CONFIG_ARCH_VEXPRESS_CA9X4=y +# CONFIG_SWP_EMULATE is not set +CONFIG_SMP=y +CONFIG_VMSPLIT_2G=y +CONFIG_HOTPLUG_CPU=y +CONFIG_AEABI=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M" +CONFIG_VFP=y +CONFIG_NEON=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_INET_LRO is not set +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_MTD=y +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_ARM_INTEGRATOR=y +CONFIG_MISC_DEVICES=y +# CONFIG_SCSI_PROC_FS is not set +CONFIG_BLK_DEV_SD=y +# CONFIG_SCSI_LOWLEVEL is not set +CONFIG_ATA=y +# CONFIG_SATA_PMP is not set +CONFIG_NETDEVICES=y +CONFIG_NET_ETHERNET=y +CONFIG_SMSC911X=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_AMBAKMI=y +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_LEGACY_PTY_COUNT=16 +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +CONFIG_FB=y +CONFIG_FB_ARMCLCD=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +# CONFIG_SND_DRIVERS is not set +CONFIG_SND_ARMAACI=y +CONFIG_HID_DRAGONRISE=y +CONFIG_HID_GYRATION=y +CONFIG_HID_TWINHAN=y +CONFIG_HID_NTRIG=y +CONFIG_HID_PANTHERLORD=y +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_HID_GREENASIA=y +CONFIG_HID_SMARTJOYPLUS=y +CONFIG_HID_TOPSEED=y +CONFIG_HID_THRUSTMASTER=y +CONFIG_HID_ZEROPLUS=y +CONFIG_USB=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +# CONFIG_USB_DEVICE_CLASS is not set +CONFIG_USB_MON=y +CONFIG_USB_ISP1760_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_MMC=y +CONFIG_MMC_ARMMMCI=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_PL031=y +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_CRAMFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_ROOT_NFS=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_SCHED_DEBUG is not set +CONFIG_DEBUG_INFO=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +CONFIG_EARLY_PRINTK=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set -- cgit v1.2.3-18-g5258 From 9728c1b6a724daefc413b44e10253cdbb5e06d08 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 19 Jan 2011 23:29:12 +0000 Subject: ARM: versatile: support CLCD RGB565 layout with blue LSB RGB565 with blue in the LSB wasn't supported. Add support for this layout. Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mach-versatile/core.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 136c32e7ed8..2866c114e68 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -630,18 +630,22 @@ static void versatile_clcd_disable(struct clcd_fb *fb) */ static void versatile_clcd_enable(struct clcd_fb *fb) { + struct fb_var_screeninfo *var = &fb->fb.var; void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET; u32 val; val = readl(sys_clcd); val &= ~SYS_CLCD_MODE_MASK; - switch (fb->fb.var.green.length) { + switch (var->green.length) { case 5: val |= SYS_CLCD_MODE_5551; break; case 6: - val |= SYS_CLCD_MODE_565_RLSB; + if (var->red.offset == 0) + val |= SYS_CLCD_MODE_565_RLSB; + else + val |= SYS_CLCD_MODE_565_BLSB; break; case 8: val |= SYS_CLCD_MODE_888; @@ -709,10 +713,19 @@ static void versatile_clcd_remove(struct clcd_fb *fb) fb->fb.screen_base, fb->fb.fix.smem_start); } +static void versatile_clcd_decode(struct clcd_fb *fb, struct clcd_regs *regs) +{ + clcdfb_decode(fb, regs); + + /* Always clear BGR for RGB565: we do the routing externally */ + if (fb->fb.var.green.length == 6) + regs->cntl &= ~CNTL_BGR; +} + static struct clcd_board clcd_plat_data = { .name = "Versatile", .check = clcdfb_check, - .decode = clcdfb_decode, + .decode = versatile_clcd_decode, .disable = versatile_clcd_disable, .enable = versatile_clcd_enable, .setup = versatile_clcd_setup, -- cgit v1.2.3-18-g5258 From e6b9c1f8a623bfaa545067df73213db1c9c8e7af Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 22 Jan 2011 11:02:10 +0000 Subject: ARM: integrator: support CLCD RGB5551 layout for 16bpp When the CLCD is in anything but RGB888 mode, its outputs are configured for RGB5551 output. Integrator/CP supports RGB565 via an external multiplexer, which we configure for RGB5551 or RGB565 based only on the bits per pixel. So when userspace asks for the RGB555 layout, the mux remains in RGB565 mode, and we produce incorrect colours. Fix this. Note that Integrator doesn't support BGR565 mode, but does support BGR5551. Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mach-integrator/include/mach/cm.h | 4 ++-- arch/arm/mach-integrator/integrator_cp.c | 14 ++++++++------ 2 files changed, 10 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-integrator/include/mach/cm.h b/arch/arm/mach-integrator/include/mach/cm.h index 1ab353e2359..445d57adb04 100644 --- a/arch/arm/mach-integrator/include/mach/cm.h +++ b/arch/arm/mach-integrator/include/mach/cm.h @@ -24,9 +24,9 @@ void cm_control(u32, u32); #define CM_CTRL_LCDBIASDN (1 << 10) #define CM_CTRL_LCDMUXSEL_MASK (7 << 11) #define CM_CTRL_LCDMUXSEL_GENLCD (1 << 11) -#define CM_CTRL_LCDMUXSEL_VGA_16BPP (2 << 11) +#define CM_CTRL_LCDMUXSEL_VGA565_TFT555 (2 << 11) #define CM_CTRL_LCDMUXSEL_SHARPLCD (3 << 11) -#define CM_CTRL_LCDMUXSEL_VGA_8421BPP (4 << 11) +#define CM_CTRL_LCDMUXSEL_VGA555_TFT555 (4 << 11) #define CM_CTRL_LCDEN0 (1 << 14) #define CM_CTRL_LCDEN1 (1 << 15) #define CM_CTRL_STATIC1 (1 << 16) diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index e9327da1382..860090247b3 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -478,14 +478,16 @@ static struct clcd_panel vga = { */ static void cp_clcd_enable(struct clcd_fb *fb) { - u32 val; + struct fb_var_screeninfo *var = &fb->fb.var; + u32 val = CM_CTRL_STATIC1 | CM_CTRL_STATIC2; - if (fb->fb.var.bits_per_pixel <= 8) - val = CM_CTRL_LCDMUXSEL_VGA_8421BPP; + if (var->bits_per_pixel <= 8 || + (var->bits_per_pixel == 16 && var->green.length == 5)) + /* Pseudocolor, RGB555, BGR555 */ + val |= CM_CTRL_LCDMUXSEL_VGA555_TFT555; else if (fb->fb.var.bits_per_pixel <= 16) - val = CM_CTRL_LCDMUXSEL_VGA_16BPP - | CM_CTRL_LCDEN0 | CM_CTRL_LCDEN1 - | CM_CTRL_STATIC1 | CM_CTRL_STATIC2; + /* truecolor RGB565 */ + val |= CM_CTRL_LCDMUXSEL_VGA565_TFT555; else val = 0; /* no idea for this, don't trust the docs */ -- cgit v1.2.3-18-g5258 From 420c34e4ccbbacab56d199e90a214e24380077dd Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 18 Jan 2011 20:08:06 +0000 Subject: ARM: add versatile family consolidated CLCD support This consolidates the CLCD panel definitions and memory allocation into one location. Rename the Sanyo 2.5in and Epson 2.2in displays after their respective part numbers. Rather than using a general "Sanyo 2.5in" and "Epson 2.2in" description of the display panel, use the manufacturers part number to be more specific. This helps people identify what the timings actually refer to, which are panel specific. While here, add CLCD capability information to each panel definition, which has no effect until we add the board-level capabilities. Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/Kconfig | 1 + arch/arm/plat-versatile/Kconfig | 6 + arch/arm/plat-versatile/Makefile | 1 + arch/arm/plat-versatile/clcd.c | 182 ++++++++++++++++++++++++++++ arch/arm/plat-versatile/include/plat/clcd.h | 9 ++ 5 files changed, 199 insertions(+) create mode 100644 arch/arm/plat-versatile/Kconfig create mode 100644 arch/arm/plat-versatile/clcd.c create mode 100644 arch/arm/plat-versatile/include/plat/clcd.h (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 70a017042ef..3087985010b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1007,6 +1007,7 @@ source "arch/arm/mach-ux500/Kconfig" source "arch/arm/mach-versatile/Kconfig" source "arch/arm/mach-vexpress/Kconfig" +source "arch/arm/plat-versatile/Kconfig" source "arch/arm/mach-w90x900/Kconfig" diff --git a/arch/arm/plat-versatile/Kconfig b/arch/arm/plat-versatile/Kconfig new file mode 100644 index 00000000000..22540f588fd --- /dev/null +++ b/arch/arm/plat-versatile/Kconfig @@ -0,0 +1,6 @@ +if PLAT_VERSATILE + +config PLAT_VERSATILE_CLCD + bool + +endif diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile index 16dde081993..8b3341c11ee 100644 --- a/arch/arm/plat-versatile/Makefile +++ b/arch/arm/plat-versatile/Makefile @@ -6,3 +6,4 @@ ifeq ($(CONFIG_LEDS_CLASS),y) obj-$(CONFIG_ARCH_REALVIEW) += leds.o obj-$(CONFIG_ARCH_VERSATILE) += leds.o endif +obj-$(CONFIG_PLAT_VERSATILE_CLCD) += clcd.o diff --git a/arch/arm/plat-versatile/clcd.c b/arch/arm/plat-versatile/clcd.c new file mode 100644 index 00000000000..6628cc27efc --- /dev/null +++ b/arch/arm/plat-versatile/clcd.c @@ -0,0 +1,182 @@ +#include +#include +#include +#include +#include + +static struct clcd_panel vga = { + .mode = { + .name = "VGA", + .refresh = 60, + .xres = 640, + .yres = 480, + .pixclock = 39721, + .left_margin = 40, + .right_margin = 24, + .upper_margin = 32, + .lower_margin = 11, + .hsync_len = 96, + .vsync_len = 2, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_BCD | TIM2_IPC, + .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), + .caps = CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888, + .bpp = 16, +}; + +static struct clcd_panel xvga = { + .mode = { + .name = "XVGA", + .refresh = 60, + .xres = 1024, + .yres = 768, + .pixclock = 15748, + .left_margin = 152, + .right_margin = 48, + .upper_margin = 23, + .lower_margin = 3, + .hsync_len = 104, + .vsync_len = 4, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_BCD | TIM2_IPC, + .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), + .caps = CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888, + .bpp = 16, +}; + +/* Sanyo TM38QV67A02A - 3.8 inch QVGA (320x240) Color TFT */ +static struct clcd_panel sanyo_tm38qv67a02a = { + .mode = { + .name = "Sanyo TM38QV67A02A", + .refresh = 116, + .xres = 320, + .yres = 240, + .pixclock = 100000, + .left_margin = 6, + .right_margin = 6, + .upper_margin = 5, + .lower_margin = 5, + .hsync_len = 6, + .vsync_len = 6, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_BCD, + .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), + .caps = CLCD_CAP_5551, + .bpp = 16, +}; + +static struct clcd_panel sanyo_2_5_in = { + .mode = { + .name = "Sanyo QVGA Portrait", + .refresh = 116, + .xres = 240, + .yres = 320, + .pixclock = 100000, + .left_margin = 20, + .right_margin = 10, + .upper_margin = 2, + .lower_margin = 2, + .hsync_len = 10, + .vsync_len = 2, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_IVS | TIM2_IHS | TIM2_IPC, + .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), + .caps = CLCD_CAP_5551, + .bpp = 16, +}; + +/* Epson L2F50113T00 - 2.2 inch 176x220 Color TFT */ +static struct clcd_panel epson_l2f50113t00 = { + .mode = { + .name = "Epson L2F50113T00", + .refresh = 390, + .xres = 176, + .yres = 220, + .pixclock = 62500, + .left_margin = 3, + .right_margin = 2, + .upper_margin = 1, + .lower_margin = 0, + .hsync_len = 3, + .vsync_len = 2, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_BCD | TIM2_IPC, + .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), + .caps = CLCD_CAP_5551, + .bpp = 16, +}; + +static struct clcd_panel *panels[] = { + &vga, + &xvga, + &sanyo_tm38qv67a02a, + &sanyo_2_5_in, + &epson_l2f50113t00, +}; + +struct clcd_panel *versatile_clcd_get_panel(const char *name) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(panels); i++) + if (strcmp(panels[i]->mode.name, name) == 0) + break; + + if (i < ARRAY_SIZE(panels)) + return panels[i]; + + pr_err("CLCD: couldn't get parameters for panel %s\n", name); + + return NULL; +} + +int versatile_clcd_setup_dma(struct clcd_fb *fb, unsigned long framesize) +{ + dma_addr_t dma; + + fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize, + &dma, GFP_KERNEL); + if (!fb->fb.screen_base) { + pr_err("CLCD: unable to map framebuffer\n"); + return -ENOMEM; + } + + fb->fb.fix.smem_start = dma; + fb->fb.fix.smem_len = framesize; + + return 0; +} + +int versatile_clcd_mmap_dma(struct clcd_fb *fb, struct vm_area_struct *vma) +{ + return dma_mmap_writecombine(&fb->dev->dev, vma, + fb->fb.screen_base, + fb->fb.fix.smem_start, + fb->fb.fix.smem_len); +} + +void versatile_clcd_remove_dma(struct clcd_fb *fb) +{ + dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, + fb->fb.screen_base, fb->fb.fix.smem_start); +} diff --git a/arch/arm/plat-versatile/include/plat/clcd.h b/arch/arm/plat-versatile/include/plat/clcd.h new file mode 100644 index 00000000000..6bb6a1d2019 --- /dev/null +++ b/arch/arm/plat-versatile/include/plat/clcd.h @@ -0,0 +1,9 @@ +#ifndef PLAT_CLCD_H +#define PLAT_CLCD_H + +struct clcd_panel *versatile_clcd_get_panel(const char *); +int versatile_clcd_setup_dma(struct clcd_fb *, unsigned long); +int versatile_clcd_mmap_dma(struct clcd_fb *, struct vm_area_struct *); +void versatile_clcd_remove_dma(struct clcd_fb *); + +#endif -- cgit v1.2.3-18-g5258 From 9dfec4fe6d2eb5580e5adcee8827dee3a16be49d Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 18 Jan 2011 20:10:10 +0000 Subject: ARM: integrator: switch Integrator platforms to use consolidated CLCD This switches integrator platforms to use the consolidated CLCD panel support, including the display capabilities. These capabilities prevent the unsupported BGR565 mode being selected, while still allowing RGB5551, BGR5551 and RGB565 modes. Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mach-integrator/Kconfig | 1 + arch/arm/mach-integrator/impd1.c | 5 +++ arch/arm/mach-integrator/integrator_cp.c | 65 +++++--------------------------- 3 files changed, 15 insertions(+), 56 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig index 769b0f10c83..d701d32a07f 100644 --- a/arch/arm/mach-integrator/Kconfig +++ b/arch/arm/mach-integrator/Kconfig @@ -13,6 +13,7 @@ config ARCH_INTEGRATOR_CP bool "Support Integrator/CP platform" select ARCH_CINTEGRATOR select ARM_TIMER_SP804 + select PLAT_VERSATILE_CLCD help Include support for the ARM(R) Integrator CP platform. diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index 5db574f8ae3..8cbb75a96bd 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -121,6 +121,7 @@ static struct clcd_panel vga = { .height = -1, .tim2 = TIM2_BCD | TIM2_IPC, .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), + .caps = CLCD_CAP_5551, .connector = IMPD1_CTRL_DISP_VGA, .bpp = 16, .grayscale = 0, @@ -149,6 +150,7 @@ static struct clcd_panel svga = { .tim2 = TIM2_BCD, .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), .connector = IMPD1_CTRL_DISP_VGA, + .caps = CLCD_CAP_5551, .bpp = 16, .grayscale = 0, }; @@ -175,6 +177,7 @@ static struct clcd_panel prospector = { .height = -1, .tim2 = TIM2_BCD, .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), + .caps = CLCD_CAP_5551, .fixedtimings = 1, .connector = IMPD1_CTRL_DISP_LCD, .bpp = 16, @@ -206,6 +209,7 @@ static struct clcd_panel ltm10c209 = { .height = -1, .tim2 = TIM2_BCD, .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), + .caps = CLCD_CAP_5551, .fixedtimings = 1, .connector = IMPD1_CTRL_DISP_LCD, .bpp = 16, @@ -279,6 +283,7 @@ static void impd1fb_clcd_remove(struct clcd_fb *fb) static struct clcd_board impd1_clcd_data = { .name = "IM-PD/1", + .caps = CLCD_CAP_5551 | CLCD_CAP_888, .check = clcdfb_check, .decode = clcdfb_decode, .disable = impd1fb_clcd_disable, diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 860090247b3..9c0203738aa 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -42,6 +42,8 @@ #include +#include + #include "common.h" #define INTCP_PA_FLASH_BASE 0x24000000 @@ -449,30 +451,6 @@ static struct amba_device aaci_device = { /* * CLCD support */ -static struct clcd_panel vga = { - .mode = { - .name = "VGA", - .refresh = 60, - .xres = 640, - .yres = 480, - .pixclock = 39721, - .left_margin = 40, - .right_margin = 24, - .upper_margin = 32, - .lower_margin = 11, - .hsync_len = 96, - .vsync_len = 2, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), - .bpp = 16, - .grayscale = 0, -}; - /* * Ensure VGA is selected. */ @@ -500,49 +478,24 @@ static void cp_clcd_enable(struct clcd_fb *fb) CM_CTRL_n24BITEN, val); } -static unsigned long framesize = SZ_1M; - static int cp_clcd_setup(struct clcd_fb *fb) { - dma_addr_t dma; - - fb->panel = &vga; - - fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize, - &dma, GFP_KERNEL); - if (!fb->fb.screen_base) { - printk(KERN_ERR "CLCD: unable to map framebuffer\n"); - return -ENOMEM; - } - - fb->fb.fix.smem_start = dma; - fb->fb.fix.smem_len = framesize; - - return 0; -} - -static int cp_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) -{ - return dma_mmap_writecombine(&fb->dev->dev, vma, - fb->fb.screen_base, - fb->fb.fix.smem_start, - fb->fb.fix.smem_len); -} + fb->panel = versatile_clcd_get_panel("VGA"); + if (!fb->panel) + return -EINVAL; -static void cp_clcd_remove(struct clcd_fb *fb) -{ - dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, - fb->fb.screen_base, fb->fb.fix.smem_start); + return versatile_clcd_setup_dma(fb, SZ_1M); } static struct clcd_board clcd_data = { .name = "Integrator/CP", + .caps = CLCD_CAP_5551 | CLCD_CAP_RGB565 | CLCD_CAP_888, .check = clcdfb_check, .decode = clcdfb_decode, .enable = cp_clcd_enable, .setup = cp_clcd_setup, - .mmap = cp_clcd_mmap, - .remove = cp_clcd_remove, + .mmap = versatile_clcd_mmap_dma, + .remove = versatile_clcd_remove_dma, }; static struct amba_device clcd_device = { -- cgit v1.2.3-18-g5258 From 3414ba8c899023b604e6066d25bc9d516e059401 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 18 Jan 2011 20:12:10 +0000 Subject: ARM: versatile: switch Versatile to use consolidated CLCD This switches Versatile platforms to use the consolidated CLCD panel support, including the display capabilities. Versatile can support RGB5551, BGR5551, RGB565 and BGR565 modes. Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/Kconfig | 1 + arch/arm/mach-versatile/core.c | 186 ++++++++--------------------------------- 2 files changed, 36 insertions(+), 151 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 3087985010b..b0d55b9f184 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -256,6 +256,7 @@ config ARCH_VERSATILE select GENERIC_CLOCKEVENTS select ARCH_WANT_OPTIONAL_GPIOLIB select PLAT_VERSATILE + select PLAT_VERSATILE_CLCD select ARM_TIMER_SP804 help This enables support for ARM Ltd Versatile board. diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 2866c114e68..b4f1f17eeb8 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -50,6 +50,7 @@ #include #include +#include #include #include "core.h" @@ -476,127 +477,7 @@ static struct clk_lookup lookups[] = { #define SYS_CLCD_ID_SANYO_2_5 (0x07 << 8) #define SYS_CLCD_ID_VGA (0x1f << 8) -static struct clcd_panel vga = { - .mode = { - .name = "VGA", - .refresh = 60, - .xres = 640, - .yres = 480, - .pixclock = 39721, - .left_margin = 40, - .right_margin = 24, - .upper_margin = 32, - .lower_margin = 11, - .hsync_len = 96, - .vsync_len = 2, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), - .bpp = 16, -}; - -static struct clcd_panel sanyo_3_8_in = { - .mode = { - .name = "Sanyo QVGA", - .refresh = 116, - .xres = 320, - .yres = 240, - .pixclock = 100000, - .left_margin = 6, - .right_margin = 6, - .upper_margin = 5, - .lower_margin = 5, - .hsync_len = 6, - .vsync_len = 6, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD, - .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), - .bpp = 16, -}; - -static struct clcd_panel sanyo_2_5_in = { - .mode = { - .name = "Sanyo QVGA Portrait", - .refresh = 116, - .xres = 240, - .yres = 320, - .pixclock = 100000, - .left_margin = 20, - .right_margin = 10, - .upper_margin = 2, - .lower_margin = 2, - .hsync_len = 10, - .vsync_len = 2, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_IVS | TIM2_IHS | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), - .bpp = 16, -}; - -static struct clcd_panel epson_2_2_in = { - .mode = { - .name = "Epson QCIF", - .refresh = 390, - .xres = 176, - .yres = 220, - .pixclock = 62500, - .left_margin = 3, - .right_margin = 2, - .upper_margin = 1, - .lower_margin = 0, - .hsync_len = 3, - .vsync_len = 2, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), - .bpp = 16, -}; - -/* - * Detect which LCD panel is connected, and return the appropriate - * clcd_panel structure. Note: we do not have any information on - * the required timings for the 8.4in panel, so we presently assume - * VGA timings. - */ -static struct clcd_panel *versatile_clcd_panel(void) -{ - void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET; - struct clcd_panel *panel = &vga; - u32 val; - - val = readl(sys_clcd) & SYS_CLCD_ID_MASK; - if (val == SYS_CLCD_ID_SANYO_3_8) - panel = &sanyo_3_8_in; - else if (val == SYS_CLCD_ID_SANYO_2_5) - panel = &sanyo_2_5_in; - else if (val == SYS_CLCD_ID_EPSON_2_2) - panel = &epson_2_2_in; - else if (val == SYS_CLCD_ID_VGA) - panel = &vga; - else { - printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n", - val); - panel = &vga; - } - - return panel; -} +static bool is_sanyo_2_5_lcd; /* * Disable all display connectors on the interface module. @@ -614,7 +495,7 @@ static void versatile_clcd_disable(struct clcd_fb *fb) /* * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off */ - if (machine_is_versatile_ab() && fb->panel == &sanyo_2_5_in) { + if (machine_is_versatile_ab() && is_sanyo_2_5_lcd) { void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL); unsigned long ctrl; @@ -667,7 +548,7 @@ static void versatile_clcd_enable(struct clcd_fb *fb) /* * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on */ - if (machine_is_versatile_ab() && fb->panel == &sanyo_2_5_in) { + if (machine_is_versatile_ab() && is_sanyo_2_5_lcd) { void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL); unsigned long ctrl; @@ -678,39 +559,41 @@ static void versatile_clcd_enable(struct clcd_fb *fb) #endif } -static unsigned long framesize = SZ_1M; - +/* + * Detect which LCD panel is connected, and return the appropriate + * clcd_panel structure. Note: we do not have any information on + * the required timings for the 8.4in panel, so we presently assume + * VGA timings. + */ static int versatile_clcd_setup(struct clcd_fb *fb) { - dma_addr_t dma; + void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET; + const char *panel_name; + u32 val; - fb->panel = versatile_clcd_panel(); + is_sanyo_2_5_lcd = false; - fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize, - &dma, GFP_KERNEL); - if (!fb->fb.screen_base) { - printk(KERN_ERR "CLCD: unable to map framebuffer\n"); - return -ENOMEM; + val = readl(sys_clcd) & SYS_CLCD_ID_MASK; + if (val == SYS_CLCD_ID_SANYO_3_8) + panel_name = "Sanyo TM38QV67A02A"; + else if (val == SYS_CLCD_ID_SANYO_2_5) { + panel_name = "Sanyo QVGA Portrait"; + is_sanyo_2_5_lcd = true; + } else if (val == SYS_CLCD_ID_EPSON_2_2) + panel_name = "Epson L2F50113T00"; + else if (val == SYS_CLCD_ID_VGA) + panel_name = "VGA"; + else { + printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n", + val); + panel_name = "VGA"; } - fb->fb.fix.smem_start = dma; - fb->fb.fix.smem_len = framesize; + fb->panel = versatile_clcd_get_panel(panel_name); + if (!fb->panel) + return -EINVAL; - return 0; -} - -static int versatile_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) -{ - return dma_mmap_writecombine(&fb->dev->dev, vma, - fb->fb.screen_base, - fb->fb.fix.smem_start, - fb->fb.fix.smem_len); -} - -static void versatile_clcd_remove(struct clcd_fb *fb) -{ - dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, - fb->fb.screen_base, fb->fb.fix.smem_start); + return versatile_clcd_setup_dma(fb, SZ_1M); } static void versatile_clcd_decode(struct clcd_fb *fb, struct clcd_regs *regs) @@ -724,13 +607,14 @@ static void versatile_clcd_decode(struct clcd_fb *fb, struct clcd_regs *regs) static struct clcd_board clcd_plat_data = { .name = "Versatile", + .caps = CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888, .check = clcdfb_check, .decode = versatile_clcd_decode, .disable = versatile_clcd_disable, .enable = versatile_clcd_enable, .setup = versatile_clcd_setup, - .mmap = versatile_clcd_mmap, - .remove = versatile_clcd_remove, + .mmap = versatile_clcd_mmap_dma, + .remove = versatile_clcd_remove_dma, }; static struct pl061_platform_data gpio0_plat_data = { -- cgit v1.2.3-18-g5258 From 3cb5ee496ae99ee89e378d628b19cb5a904b1397 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 18 Jan 2011 20:13:20 +0000 Subject: ARM: realview: switch Realview to use consolidated CLCD This switches Realview platforms to use the consolidated CLCD panel support, including the display capabilities. As Realview uses a PL111, it can support the full range of pixel formats - 444, 5551, 565 in both RGB and BGR mode. Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/Kconfig | 1 + arch/arm/mach-realview/core.c | 214 +++++++----------------------------------- 2 files changed, 35 insertions(+), 180 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index b0d55b9f184..7ee15c2933f 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -241,6 +241,7 @@ config ARCH_REALVIEW select GENERIC_CLOCKEVENTS select ARCH_WANT_OPTIONAL_GPIOLIB select PLAT_VERSATILE + select PLAT_VERSATILE_CLCD select ARM_TIMER_SP804 select GPIO_PL061 if GPIOLIB help diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 1c6602cf50e..a18a5a66c4c 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -51,6 +51,7 @@ #include #include +#include #include #include "core.h" @@ -385,157 +386,6 @@ core_initcall(clk_init); #define SYS_CLCD_ID_SANYO_2_5 (0x07 << 8) #define SYS_CLCD_ID_VGA (0x1f << 8) -static struct clcd_panel vga = { - .mode = { - .name = "VGA", - .refresh = 60, - .xres = 640, - .yres = 480, - .pixclock = 39721, - .left_margin = 40, - .right_margin = 24, - .upper_margin = 32, - .lower_margin = 11, - .hsync_len = 96, - .vsync_len = 2, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), - .bpp = 16, -}; - -static struct clcd_panel xvga = { - .mode = { - .name = "XVGA", - .refresh = 60, - .xres = 1024, - .yres = 768, - .pixclock = 15748, - .left_margin = 152, - .right_margin = 48, - .upper_margin = 23, - .lower_margin = 3, - .hsync_len = 104, - .vsync_len = 4, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), - .bpp = 16, -}; - -static struct clcd_panel sanyo_3_8_in = { - .mode = { - .name = "Sanyo QVGA", - .refresh = 116, - .xres = 320, - .yres = 240, - .pixclock = 100000, - .left_margin = 6, - .right_margin = 6, - .upper_margin = 5, - .lower_margin = 5, - .hsync_len = 6, - .vsync_len = 6, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD, - .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), - .bpp = 16, -}; - -static struct clcd_panel sanyo_2_5_in = { - .mode = { - .name = "Sanyo QVGA Portrait", - .refresh = 116, - .xres = 240, - .yres = 320, - .pixclock = 100000, - .left_margin = 20, - .right_margin = 10, - .upper_margin = 2, - .lower_margin = 2, - .hsync_len = 10, - .vsync_len = 2, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_IVS | TIM2_IHS | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), - .bpp = 16, -}; - -static struct clcd_panel epson_2_2_in = { - .mode = { - .name = "Epson QCIF", - .refresh = 390, - .xres = 176, - .yres = 220, - .pixclock = 62500, - .left_margin = 3, - .right_margin = 2, - .upper_margin = 1, - .lower_margin = 0, - .hsync_len = 3, - .vsync_len = 2, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), - .bpp = 16, -}; - -/* - * Detect which LCD panel is connected, and return the appropriate - * clcd_panel structure. Note: we do not have any information on - * the required timings for the 8.4in panel, so we presently assume - * VGA timings. - */ -static struct clcd_panel *realview_clcd_panel(void) -{ - void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET; - struct clcd_panel *vga_panel; - struct clcd_panel *panel; - u32 val; - - if (machine_is_realview_eb()) - vga_panel = &vga; - else - vga_panel = &xvga; - - val = readl(sys_clcd) & SYS_CLCD_ID_MASK; - if (val == SYS_CLCD_ID_SANYO_3_8) - panel = &sanyo_3_8_in; - else if (val == SYS_CLCD_ID_SANYO_2_5) - panel = &sanyo_2_5_in; - else if (val == SYS_CLCD_ID_EPSON_2_2) - panel = &epson_2_2_in; - else if (val == SYS_CLCD_ID_VGA) - panel = vga_panel; - else { - printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n", - val); - panel = vga_panel; - } - - return panel; -} - /* * Disable all display connectors on the interface module. */ @@ -565,56 +415,60 @@ static void realview_clcd_enable(struct clcd_fb *fb) writel(val, sys_clcd); } +/* + * Detect which LCD panel is connected, and return the appropriate + * clcd_panel structure. Note: we do not have any information on + * the required timings for the 8.4in panel, so we presently assume + * VGA timings. + */ static int realview_clcd_setup(struct clcd_fb *fb) { + void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET; + const char *panel_name, *vga_panel_name; unsigned long framesize; - dma_addr_t dma; + u32 val; - if (machine_is_realview_eb()) + if (machine_is_realview_eb()) { /* VGA, 16bpp */ framesize = 640 * 480 * 2; - else + vga_panel_name = "VGA"; + } else { /* XVGA, 16bpp */ framesize = 1024 * 768 * 2; - - fb->panel = realview_clcd_panel(); - - fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize, - &dma, GFP_KERNEL | GFP_DMA); - if (!fb->fb.screen_base) { - printk(KERN_ERR "CLCD: unable to map framebuffer\n"); - return -ENOMEM; + vga_panel_name = "XVGA"; } - fb->fb.fix.smem_start = dma; - fb->fb.fix.smem_len = framesize; - - return 0; -} + val = readl(sys_clcd) & SYS_CLCD_ID_MASK; + if (val == SYS_CLCD_ID_SANYO_3_8) + panel_name = "Sanyo TM38QV67A02A"; + else if (val == SYS_CLCD_ID_SANYO_2_5) + panel_name = "Sanyo QVGA Portrait"; + else if (val == SYS_CLCD_ID_EPSON_2_2) + panel_name = "Epson L2F50113T00"; + else if (val == SYS_CLCD_ID_VGA) + panel_name = vga_panel_name; + else { + pr_err("CLCD: unknown LCD panel ID 0x%08x, using VGA\n", val); + panel_name = vga_panel_name; + } -static int realview_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) -{ - return dma_mmap_writecombine(&fb->dev->dev, vma, - fb->fb.screen_base, - fb->fb.fix.smem_start, - fb->fb.fix.smem_len); -} + fb->panel = versatile_clcd_get_panel(panel_name); + if (!fb->panel) + return -EINVAL; -static void realview_clcd_remove(struct clcd_fb *fb) -{ - dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, - fb->fb.screen_base, fb->fb.fix.smem_start); + return versatile_clcd_setup_dma(fb, framesize); } struct clcd_board clcd_plat_data = { .name = "RealView", + .caps = CLCD_CAP_ALL, .check = clcdfb_check, .decode = clcdfb_decode, .disable = realview_clcd_disable, .enable = realview_clcd_enable, .setup = realview_clcd_setup, - .mmap = realview_clcd_mmap, - .remove = realview_clcd_remove, + .mmap = versatile_clcd_mmap_dma, + .remove = versatile_clcd_remove_dma, }; #ifdef CONFIG_LEDS -- cgit v1.2.3-18-g5258 From 0fb44b910f6873c49066e8d0bf681a058fc01b67 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 18 Jan 2011 20:13:51 +0000 Subject: ARM: vexpress: switch Versatile Express to use consolidated CLCD This switches Versatile Express to use the conslidated CLCD panel support, including the display capabilities. As Versatile Express uses a PL111, it can support the full range of pixel formats - 444, 5551, 565 in both RGB and BGR mode. Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/Kconfig | 1 + arch/arm/mach-vexpress/ct-ca9x4.c | 58 ++++++--------------------------------- 2 files changed, 10 insertions(+), 49 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 7ee15c2933f..4f0e83e0798 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -274,6 +274,7 @@ config ARCH_VEXPRESS select HAVE_PATA_PLATFORM select ICST select PLAT_VERSATILE + select PLAT_VERSATILE_CLCD help This enables support for the ARM Ltd Versatile Express boards. diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index e628402b754..27baed18a25 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -30,6 +30,8 @@ #include +#include + #define V2M_PA_CS7 0x10000000 static struct map_desc ct_ca9x4_io_desc[] __initdata = { @@ -80,29 +82,6 @@ static struct sys_timer ct_ca9x4_timer = { }; #endif -static struct clcd_panel xvga_panel = { - .mode = { - .name = "XVGA", - .refresh = 60, - .xres = 1024, - .yres = 768, - .pixclock = 15384, - .left_margin = 168, - .right_margin = 8, - .upper_margin = 29, - .lower_margin = 3, - .hsync_len = 144, - .vsync_len = 6, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), - .bpp = 16, -}; - static void ct_ca9x4_clcd_enable(struct clcd_fb *fb) { v2m_cfg_write(SYS_CFG_MUXFPGA | SYS_CFG_SITE_DB1, 0); @@ -112,42 +91,23 @@ static void ct_ca9x4_clcd_enable(struct clcd_fb *fb) static int ct_ca9x4_clcd_setup(struct clcd_fb *fb) { unsigned long framesize = 1024 * 768 * 2; - dma_addr_t dma; - - fb->panel = &xvga_panel; - fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize, - &dma, GFP_KERNEL); - if (!fb->fb.screen_base) { - printk(KERN_ERR "CLCD: unable to map frame buffer\n"); - return -ENOMEM; - } - fb->fb.fix.smem_start = dma; - fb->fb.fix.smem_len = framesize; + fb->panel = versatile_clcd_get_panel("XVGA"); + if (!fb->panel) + return -EINVAL; - return 0; -} - -static int ct_ca9x4_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) -{ - return dma_mmap_writecombine(&fb->dev->dev, vma, fb->fb.screen_base, - fb->fb.fix.smem_start, fb->fb.fix.smem_len); -} - -static void ct_ca9x4_clcd_remove(struct clcd_fb *fb) -{ - dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, - fb->fb.screen_base, fb->fb.fix.smem_start); + return versatile_clcd_setup_dma(fb, framesize); } static struct clcd_board ct_ca9x4_clcd_data = { .name = "CT-CA9X4", + .caps = CLCD_CAP_5551 | CLCD_CAP_565, .check = clcdfb_check, .decode = clcdfb_decode, .enable = ct_ca9x4_clcd_enable, .setup = ct_ca9x4_clcd_setup, - .mmap = ct_ca9x4_clcd_mmap, - .remove = ct_ca9x4_clcd_remove, + .mmap = versatile_clcd_mmap_dma, + .remove = versatile_clcd_remove_dma, }; static AMBA_DEVICE(clcd, "ct:clcd", CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data); -- cgit v1.2.3-18-g5258 From c735c9873d0c2f269fd16f4b04903da41a44cbcf Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 11 Jan 2011 13:00:04 +0000 Subject: ARM: integrator: use new init_early for clock tree init Initialize the clock tree early. Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mach-integrator/common.h | 1 + arch/arm/mach-integrator/core.c | 7 +++++-- arch/arm/mach-integrator/integrator_ap.c | 3 ++- arch/arm/mach-integrator/integrator_cp.c | 11 +++++++++-- 4 files changed, 17 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-integrator/common.h b/arch/arm/mach-integrator/common.h index 5f96e1518aa..a08f9b0299d 100644 --- a/arch/arm/mach-integrator/common.h +++ b/arch/arm/mach-integrator/common.h @@ -1 +1,2 @@ +void integrator_init_early(void); void integrator_reserve(void); diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index b8e884b450d..77315b99568 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -144,12 +144,15 @@ static struct clk_lookup lookups[] = { } }; +void __init integrator_init_early(void) +{ + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); +} + static int __init integrator_init(void) { int i; - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { struct amba_device *d = amba_devs[i]; amba_device_register(d, &iomem_resource); diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index b666443b5cb..4f06b5d7248 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -499,8 +499,9 @@ static struct sys_timer ap_timer = { MACHINE_START(INTEGRATOR, "ARM-Integrator") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ .boot_params = 0x00000100, - .map_io = ap_map_io, .reserve = integrator_reserve, + .map_io = ap_map_io, + .init_early = integrator_init_early, .init_irq = ap_init_irq, .timer = &ap_timer, .init_machine = ap_init, diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 9c0203738aa..e6700aab849 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -520,11 +520,17 @@ static struct amba_device *amba_devs[] __initdata = { &clcd_device, }; +static void __init intcp_init_early(void) +{ + clkdev_add_table(cp_lookups, ARRAY_SIZE(cp_lookups)); + + integrator_init_early(); +} + static void __init intcp_init(void) { int i; - clkdev_add_table(cp_lookups, ARRAY_SIZE(cp_lookups)); platform_add_devices(intcp_devs, ARRAY_SIZE(intcp_devs)); for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { @@ -554,8 +560,9 @@ static struct sys_timer cp_timer = { MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ .boot_params = 0x00000100, - .map_io = intcp_map_io, .reserve = integrator_reserve, + .map_io = intcp_map_io, + .init_early = intcp_init_early, .init_irq = intcp_init_irq, .timer = &cp_timer, .init_machine = intcp_init, -- cgit v1.2.3-18-g5258 From ad3bb19c5bd17cebe8e9a97dc0b53e274a05f23b Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 11 Jan 2011 12:55:38 +0000 Subject: ARM: versatile: use new init_early for clock tree and sched_clock init Initialize the clock tree and our sched_clock() early. Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mach-versatile/core.c | 23 +++++++++++------------ arch/arm/mach-versatile/core.h | 1 + arch/arm/mach-versatile/versatile_ab.c | 1 + arch/arm/mach-versatile/versatile_pb.c | 1 + 4 files changed, 14 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index b4f1f17eeb8..606e046905e 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -762,14 +762,21 @@ static void versatile_leds_event(led_event_t ledevt) } #endif /* CONFIG_LEDS */ -void __init versatile_init(void) +/* Early initializations */ +void __init versatile_init_early(void) { - int i; - - osc4_clk.vcoreg = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSCCLCD_OFFSET; + void __iomem *sys = __io_address(VERSATILE_SYS_BASE); + osc4_clk.vcoreg = sys + VERSATILE_SYS_OSCCLCD_OFFSET; clkdev_add_table(lookups, ARRAY_SIZE(lookups)); + versatile_sched_clock_init(sys + VERSATILE_SYS_24MHz_OFFSET, 24000000); +} + +void __init versatile_init(void) +{ + int i; + platform_device_register(&versatile_flash_device); platform_device_register(&versatile_i2c_device); platform_device_register(&smc91x_device); @@ -785,12 +792,6 @@ void __init versatile_init(void) #endif } -/* - * The sched_clock counter - */ -#define REFCOUNTER (__io_address(VERSATILE_SYS_BASE) + \ - VERSATILE_SYS_24MHz_OFFSET) - /* * Where is the timer (VA)? */ @@ -806,8 +807,6 @@ static void __init versatile_timer_init(void) { u32 val; - versatile_sched_clock_init(REFCOUNTER, 24000000); - /* * set clock frequency: * VERSATILE_REFCLK is 32KHz diff --git a/arch/arm/mach-versatile/core.h b/arch/arm/mach-versatile/core.h index 9d39886a835..e04768a6c5d 100644 --- a/arch/arm/mach-versatile/core.h +++ b/arch/arm/mach-versatile/core.h @@ -25,6 +25,7 @@ #include extern void __init versatile_init(void); +extern void __init versatile_init_early(void); extern void __init versatile_init_irq(void); extern void __init versatile_map_io(void); extern struct sys_timer versatile_timer; diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c index aa9730fb13b..f8ae64b3eed 100644 --- a/arch/arm/mach-versatile/versatile_ab.c +++ b/arch/arm/mach-versatile/versatile_ab.c @@ -37,6 +37,7 @@ MACHINE_START(VERSATILE_AB, "ARM-Versatile AB") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ .boot_params = 0x00000100, .map_io = versatile_map_io, + .init_early = versatile_init_early, .init_irq = versatile_init_irq, .timer = &versatile_timer, .init_machine = versatile_init, diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c index bf469642a3f..97fb30691c4 100644 --- a/arch/arm/mach-versatile/versatile_pb.c +++ b/arch/arm/mach-versatile/versatile_pb.c @@ -110,6 +110,7 @@ MACHINE_START(VERSATILE_PB, "ARM-Versatile PB") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ .boot_params = 0x00000100, .map_io = versatile_map_io, + .init_early = versatile_init_early, .init_irq = versatile_init_irq, .timer = &versatile_timer, .init_machine = versatile_pb_init, -- cgit v1.2.3-18-g5258 From 631e55f966668d7a957342b38d7148643d919d73 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 11 Jan 2011 13:05:01 +0000 Subject: ARM: realview: use new init_early for clock tree and sched_clock init Initialize the clock tree and our sched_clock() early. Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mach-realview/core.c | 19 ++++++------------- arch/arm/mach-realview/core.h | 1 + arch/arm/mach-realview/realview_eb.c | 1 + arch/arm/mach-realview/realview_pb1176.c | 1 + arch/arm/mach-realview/realview_pb11mp.c | 1 + arch/arm/mach-realview/realview_pba8.c | 1 + arch/arm/mach-realview/realview_pbx.c | 1 + 7 files changed, 12 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index a18a5a66c4c..75dbc8791d0 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -360,18 +360,19 @@ static struct clk_lookup lookups[] = { } }; -static int __init clk_init(void) +void __init realview_init_early(void) { + void __iomem *sys = __io_address(REALVIEW_SYS_BASE); + if (machine_is_realview_pb1176()) - oscvco_clk.vcoreg = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC0_OFFSET; + oscvco_clk.vcoreg = sys + REALVIEW_SYS_OSC0_OFFSET; else - oscvco_clk.vcoreg = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC4_OFFSET; + oscvco_clk.vcoreg = sys + REALVIEW_SYS_OSC4_OFFSET; clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - return 0; + versatile_sched_clock_init(sys + REALVIEW_SYS_24MHz_OFFSET, 24000000); } -core_initcall(clk_init); /* * CLCD support. @@ -509,12 +510,6 @@ void realview_leds_event(led_event_t ledevt) } #endif /* CONFIG_LEDS */ -/* - * The sched_clock counter - */ -#define REFCOUNTER (__io_address(REALVIEW_SYS_BASE) + \ - REALVIEW_SYS_24MHz_OFFSET) - /* * Where is the timer (VA)? */ @@ -530,8 +525,6 @@ void __init realview_timer_init(unsigned int timer_irq) { u32 val; - versatile_sched_clock_init(REFCOUNTER, 24000000); - /* * set clock frequency: * REALVIEW_REFCLK is 32KHz diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index 693239ddc39..27c92738708 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -63,6 +63,7 @@ extern void realview_timer_init(unsigned int timer_irq); extern int realview_flash_register(struct resource *res, u32 num); extern int realview_eth_register(const char *name, struct resource *res); extern int realview_usb_register(struct resource *res); +extern void realview_init_early(void); extern void realview_fixup(struct machine_desc *mdesc, struct tag *tags, char **from, struct meminfo *meminfo); extern void (*realview_reset)(char); diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 6ef5c5e528b..c00e52754ef 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -487,6 +487,7 @@ MACHINE_START(REALVIEW_EB, "ARM-RealView EB") .boot_params = PHYS_OFFSET + 0x00000100, .fixup = realview_fixup, .map_io = realview_eb_map_io, + .init_early = realview_init_early, .init_irq = gic_init_irq, .timer = &realview_eb_timer, .init_machine = realview_eb_init, diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index cbdc97a5685..f0447bbf809 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -382,6 +382,7 @@ MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176") .boot_params = PHYS_OFFSET + 0x00000100, .fixup = realview_pb1176_fixup, .map_io = realview_pb1176_map_io, + .init_early = realview_init_early, .init_irq = gic_init_irq, .timer = &realview_pb1176_timer, .init_machine = realview_pb1176_init, diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 8e8ab7d29a6..3b4f78870ac 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -384,6 +384,7 @@ MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore") .boot_params = PHYS_OFFSET + 0x00000100, .fixup = realview_fixup, .map_io = realview_pb11mp_map_io, + .init_early = realview_init_early, .init_irq = gic_init_irq, .timer = &realview_pb11mp_timer, .init_machine = realview_pb11mp_init, diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index 841118e3e11..f98d4fa74e3 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -334,6 +334,7 @@ MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8") .boot_params = PHYS_OFFSET + 0x00000100, .fixup = realview_fixup, .map_io = realview_pba8_map_io, + .init_early = realview_init_early, .init_irq = gic_init_irq, .timer = &realview_pba8_timer, .init_machine = realview_pba8_init, diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index 02b755b009d..b0521e1bb1a 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -417,6 +417,7 @@ MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX") .boot_params = PHYS_OFFSET + 0x00000100, .fixup = realview_pbx_fixup, .map_io = realview_pbx_map_io, + .init_early = realview_init_early, .init_irq = gic_init_irq, .timer = &realview_pbx_timer, .init_machine = realview_pbx_init, -- cgit v1.2.3-18-g5258 From 493a451bb559476d2f7f189670be2172ca3010b4 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 11 Jan 2011 13:07:52 +0000 Subject: ARM: vexpress: use new init_early for clock tree and sched_clock init Initialize the clock tree and our sched_clock() early. Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mach-vexpress/core.h | 1 + arch/arm/mach-vexpress/ct-ca9x4.c | 10 ++++++++-- arch/arm/mach-vexpress/v2m.c | 6 ++++-- 3 files changed, 13 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h index 362780d868d..e0312a1dce3 100644 --- a/arch/arm/mach-vexpress/core.h +++ b/arch/arm/mach-vexpress/core.h @@ -21,4 +21,5 @@ struct amba_device name##_device = { \ struct map_desc; void v2m_map_io(struct map_desc *tile, size_t num); +void v2m_init_early(void); extern struct sys_timer v2m_timer; diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index 27baed18a25..ff48ebc1a40 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -180,6 +180,13 @@ static struct platform_device pmu_device = { .resource = pmu_resources, }; +static void __init ct_ca9x4_init_early(void) +{ + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); + + v2m_init_early(); +} + static void __init ct_ca9x4_init(void) { int i; @@ -194,8 +201,6 @@ static void __init ct_ca9x4_init(void) l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff); #endif - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - for (i = 0; i < ARRAY_SIZE(ct_ca9x4_amba_devs); i++) amba_device_register(ct_ca9x4_amba_devs[i], &iomem_resource); @@ -206,6 +211,7 @@ MACHINE_START(VEXPRESS, "ARM-Versatile Express CA9x4") .boot_params = PHYS_OFFSET + 0x00000100, .map_io = ct_ca9x4_map_io, .init_irq = ct_ca9x4_init_irq, + .init_early = ct_ca9x4_init_early, #if 0 .timer = &ct_ca9x4_timer, #else diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index f35d646a1bf..63ef663fb0b 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -49,13 +49,15 @@ void __init v2m_map_io(struct map_desc *tile, size_t num) iotable_init(tile, num); } +void __init v2m_init_early(void) +{ + versatile_sched_clock_init(MMIO_P2V(V2M_SYS_24MHZ), 24000000); +} static void __init v2m_timer_init(void) { u32 scctrl; - versatile_sched_clock_init(MMIO_P2V(V2M_SYS_24MHZ), 24000000); - /* Select 1MHz TIMCLK as the reference clock for SP804 timers */ scctrl = readl(MMIO_P2V(V2M_SYSCTL + SCCTRL)); scctrl |= SCCTRL_TIMEREN0SEL_TIMCLK; -- cgit v1.2.3-18-g5258 From 5e4b822f298b49d2940e09c31695a64417a836b9 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 18 Jan 2011 19:47:40 +0000 Subject: ARM: versatile: remove old AMBA device DMA definitions The AMBA DMA macro definitions are not used, and the AMBA Primecell DMA support makes no use of them either, so they can be removed. Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mach-versatile/core.c | 18 ------------------ arch/arm/mach-versatile/core.h | 1 - arch/arm/mach-versatile/versatile_pb.c | 5 ----- 3 files changed, 24 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 606e046905e..630a1c96f90 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -634,53 +634,35 @@ static struct pl022_ssp_controller ssp0_plat_data = { }; #define AACI_IRQ { IRQ_AACI, NO_IRQ } -#define AACI_DMA { 0x80, 0x81 } #define MMCI0_IRQ { IRQ_MMCI0A,IRQ_SIC_MMCI0B } -#define MMCI0_DMA { 0x84, 0 } #define KMI0_IRQ { IRQ_SIC_KMI0, NO_IRQ } -#define KMI0_DMA { 0, 0 } #define KMI1_IRQ { IRQ_SIC_KMI1, NO_IRQ } -#define KMI1_DMA { 0, 0 } /* * These devices are connected directly to the multi-layer AHB switch */ #define SMC_IRQ { NO_IRQ, NO_IRQ } -#define SMC_DMA { 0, 0 } #define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_DMA { 0, 0 } #define CLCD_IRQ { IRQ_CLCDINT, NO_IRQ } -#define CLCD_DMA { 0, 0 } #define DMAC_IRQ { IRQ_DMAINT, NO_IRQ } -#define DMAC_DMA { 0, 0 } /* * These devices are connected via the core APB bridge */ #define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define SCTL_DMA { 0, 0 } #define WATCHDOG_IRQ { IRQ_WDOGINT, NO_IRQ } -#define WATCHDOG_DMA { 0, 0 } #define GPIO0_IRQ { IRQ_GPIOINT0, NO_IRQ } -#define GPIO0_DMA { 0, 0 } #define GPIO1_IRQ { IRQ_GPIOINT1, NO_IRQ } -#define GPIO1_DMA { 0, 0 } #define RTC_IRQ { IRQ_RTCINT, NO_IRQ } -#define RTC_DMA { 0, 0 } /* * These devices are connected via the DMA APB bridge */ #define SCI_IRQ { IRQ_SCIINT, NO_IRQ } -#define SCI_DMA { 7, 6 } #define UART0_IRQ { IRQ_UARTINT0, NO_IRQ } -#define UART0_DMA { 15, 14 } #define UART1_IRQ { IRQ_UARTINT1, NO_IRQ } -#define UART1_DMA { 13, 12 } #define UART2_IRQ { IRQ_UARTINT2, NO_IRQ } -#define UART2_DMA { 11, 10 } #define SSP_IRQ { IRQ_SSPINT, NO_IRQ } -#define SSP_DMA { 9, 8 } /* FPGA Primecells */ AMBA_DEVICE(aaci, "fpga:04", AACI, NULL); diff --git a/arch/arm/mach-versatile/core.h b/arch/arm/mach-versatile/core.h index e04768a6c5d..fd6404e5d78 100644 --- a/arch/arm/mach-versatile/core.h +++ b/arch/arm/mach-versatile/core.h @@ -45,7 +45,6 @@ static struct amba_device name##_device = { \ }, \ .dma_mask = ~0, \ .irq = base##_IRQ, \ - /* .dma = base##_DMA,*/ \ } #endif diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c index 97fb30691c4..37c23dfeefb 100644 --- a/arch/arm/mach-versatile/versatile_pb.c +++ b/arch/arm/mach-versatile/versatile_pb.c @@ -59,19 +59,14 @@ static struct pl061_platform_data gpio3_plat_data = { }; #define UART3_IRQ { IRQ_SIC_UART3, NO_IRQ } -#define UART3_DMA { 0x86, 0x87 } #define SCI1_IRQ { IRQ_SIC_SCI3, NO_IRQ } -#define SCI1_DMA { 0x88, 0x89 } #define MMCI1_IRQ { IRQ_MMCI1A, IRQ_SIC_MMCI1B } -#define MMCI1_DMA { 0x85, 0 } /* * These devices are connected via the core APB bridge */ #define GPIO2_IRQ { IRQ_GPIOINT2, NO_IRQ } -#define GPIO2_DMA { 0, 0 } #define GPIO3_IRQ { IRQ_GPIOINT3, NO_IRQ } -#define GPIO3_DMA { 0, 0 } /* * These devices are connected via the DMA APB bridge -- cgit v1.2.3-18-g5258 From f093728c0ddc30bef5792b7faf2743024b166350 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 18 Jan 2011 19:48:57 +0000 Subject: ARM: realview: remove old AMBA device DMA definitions The AMBA DMA macro definitions are not used, and the AMBA Primecell DMA support makes no use of them either, so they can be removed. Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mach-realview/core.h | 1 - arch/arm/mach-realview/realview_eb.c | 21 --------------------- arch/arm/mach-realview/realview_pb1176.c | 21 --------------------- arch/arm/mach-realview/realview_pb11mp.c | 21 --------------------- arch/arm/mach-realview/realview_pba8.c | 21 --------------------- arch/arm/mach-realview/realview_pbx.c | 21 --------------------- 6 files changed, 106 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index 27c92738708..5c83d1e87a0 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -42,7 +42,6 @@ static struct amba_device name##_device = { \ }, \ .dma_mask = ~0, \ .irq = base##_IRQ, \ - /* .dma = base##_DMA,*/ \ } struct machine_desc; diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index c00e52754ef..d0f851b886d 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -144,60 +144,39 @@ static struct pl022_ssp_controller ssp0_plat_data = { * These devices are connected via the core APB bridge */ #define GPIO2_IRQ { IRQ_EB_GPIO2, NO_IRQ } -#define GPIO2_DMA { 0, 0 } #define GPIO3_IRQ { IRQ_EB_GPIO3, NO_IRQ } -#define GPIO3_DMA { 0, 0 } #define AACI_IRQ { IRQ_EB_AACI, NO_IRQ } -#define AACI_DMA { 0x80, 0x81 } #define MMCI0_IRQ { IRQ_EB_MMCI0A, IRQ_EB_MMCI0B } -#define MMCI0_DMA { 0x84, 0 } #define KMI0_IRQ { IRQ_EB_KMI0, NO_IRQ } -#define KMI0_DMA { 0, 0 } #define KMI1_IRQ { IRQ_EB_KMI1, NO_IRQ } -#define KMI1_DMA { 0, 0 } /* * These devices are connected directly to the multi-layer AHB switch */ #define EB_SMC_IRQ { NO_IRQ, NO_IRQ } -#define EB_SMC_DMA { 0, 0 } #define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_DMA { 0, 0 } #define EB_CLCD_IRQ { IRQ_EB_CLCD, NO_IRQ } -#define EB_CLCD_DMA { 0, 0 } #define DMAC_IRQ { IRQ_EB_DMA, NO_IRQ } -#define DMAC_DMA { 0, 0 } /* * These devices are connected via the core APB bridge */ #define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define SCTL_DMA { 0, 0 } #define EB_WATCHDOG_IRQ { IRQ_EB_WDOG, NO_IRQ } -#define EB_WATCHDOG_DMA { 0, 0 } #define EB_GPIO0_IRQ { IRQ_EB_GPIO0, NO_IRQ } -#define EB_GPIO0_DMA { 0, 0 } #define GPIO1_IRQ { IRQ_EB_GPIO1, NO_IRQ } -#define GPIO1_DMA { 0, 0 } #define EB_RTC_IRQ { IRQ_EB_RTC, NO_IRQ } -#define EB_RTC_DMA { 0, 0 } /* * These devices are connected via the DMA APB bridge */ #define SCI_IRQ { IRQ_EB_SCI, NO_IRQ } -#define SCI_DMA { 7, 6 } #define EB_UART0_IRQ { IRQ_EB_UART0, NO_IRQ } -#define EB_UART0_DMA { 15, 14 } #define EB_UART1_IRQ { IRQ_EB_UART1, NO_IRQ } -#define EB_UART1_DMA { 13, 12 } #define EB_UART2_IRQ { IRQ_EB_UART2, NO_IRQ } -#define EB_UART2_DMA { 11, 10 } #define EB_UART3_IRQ { IRQ_EB_UART3, NO_IRQ } -#define EB_UART3_DMA { 0x86, 0x87 } #define EB_SSP_IRQ { IRQ_EB_SSP, NO_IRQ } -#define EB_SSP_DMA { 9, 8 } /* FPGA Primecells */ AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index f0447bbf809..61f6a9d853f 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -134,47 +134,26 @@ static struct pl022_ssp_controller ssp0_plat_data = { * RealView PB1176 AMBA devices */ #define GPIO2_IRQ { IRQ_PB1176_GPIO2, NO_IRQ } -#define GPIO2_DMA { 0, 0 } #define GPIO3_IRQ { IRQ_PB1176_GPIO3, NO_IRQ } -#define GPIO3_DMA { 0, 0 } #define AACI_IRQ { IRQ_PB1176_AACI, NO_IRQ } -#define AACI_DMA { 0x80, 0x81 } #define MMCI0_IRQ { IRQ_PB1176_MMCI0A, IRQ_PB1176_MMCI0B } -#define MMCI0_DMA { 0x84, 0 } #define KMI0_IRQ { IRQ_PB1176_KMI0, NO_IRQ } -#define KMI0_DMA { 0, 0 } #define KMI1_IRQ { IRQ_PB1176_KMI1, NO_IRQ } -#define KMI1_DMA { 0, 0 } #define PB1176_SMC_IRQ { NO_IRQ, NO_IRQ } -#define PB1176_SMC_DMA { 0, 0 } #define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_DMA { 0, 0 } #define PB1176_CLCD_IRQ { IRQ_DC1176_CLCD, NO_IRQ } -#define PB1176_CLCD_DMA { 0, 0 } #define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define SCTL_DMA { 0, 0 } #define PB1176_WATCHDOG_IRQ { IRQ_DC1176_WATCHDOG, NO_IRQ } -#define PB1176_WATCHDOG_DMA { 0, 0 } #define PB1176_GPIO0_IRQ { IRQ_PB1176_GPIO0, NO_IRQ } -#define PB1176_GPIO0_DMA { 0, 0 } #define GPIO1_IRQ { IRQ_PB1176_GPIO1, NO_IRQ } -#define GPIO1_DMA { 0, 0 } #define PB1176_RTC_IRQ { IRQ_DC1176_RTC, NO_IRQ } -#define PB1176_RTC_DMA { 0, 0 } #define SCI_IRQ { IRQ_PB1176_SCI, NO_IRQ } -#define SCI_DMA { 7, 6 } #define PB1176_UART0_IRQ { IRQ_DC1176_UART0, NO_IRQ } -#define PB1176_UART0_DMA { 15, 14 } #define PB1176_UART1_IRQ { IRQ_DC1176_UART1, NO_IRQ } -#define PB1176_UART1_DMA { 13, 12 } #define PB1176_UART2_IRQ { IRQ_DC1176_UART2, NO_IRQ } -#define PB1176_UART2_DMA { 11, 10 } #define PB1176_UART3_IRQ { IRQ_DC1176_UART3, NO_IRQ } -#define PB1176_UART3_DMA { 0x86, 0x87 } #define PB1176_UART4_IRQ { IRQ_PB1176_UART4, NO_IRQ } -#define PB1176_UART4_DMA { 0, 0 } #define PB1176_SSP_IRQ { IRQ_DC1176_SSP, NO_IRQ } -#define PB1176_SSP_DMA { 9, 8 } /* FPGA Primecells */ AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 3b4f78870ac..27bfeca8912 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -136,47 +136,26 @@ static struct pl022_ssp_controller ssp0_plat_data = { */ #define GPIO2_IRQ { IRQ_PB11MP_GPIO2, NO_IRQ } -#define GPIO2_DMA { 0, 0 } #define GPIO3_IRQ { IRQ_PB11MP_GPIO3, NO_IRQ } -#define GPIO3_DMA { 0, 0 } #define AACI_IRQ { IRQ_TC11MP_AACI, NO_IRQ } -#define AACI_DMA { 0x80, 0x81 } #define MMCI0_IRQ { IRQ_TC11MP_MMCI0A, IRQ_TC11MP_MMCI0B } -#define MMCI0_DMA { 0x84, 0 } #define KMI0_IRQ { IRQ_TC11MP_KMI0, NO_IRQ } -#define KMI0_DMA { 0, 0 } #define KMI1_IRQ { IRQ_TC11MP_KMI1, NO_IRQ } -#define KMI1_DMA { 0, 0 } #define PB11MP_SMC_IRQ { NO_IRQ, NO_IRQ } -#define PB11MP_SMC_DMA { 0, 0 } #define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_DMA { 0, 0 } #define PB11MP_CLCD_IRQ { IRQ_PB11MP_CLCD, NO_IRQ } -#define PB11MP_CLCD_DMA { 0, 0 } #define DMAC_IRQ { IRQ_PB11MP_DMAC, NO_IRQ } -#define DMAC_DMA { 0, 0 } #define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define SCTL_DMA { 0, 0 } #define PB11MP_WATCHDOG_IRQ { IRQ_PB11MP_WATCHDOG, NO_IRQ } -#define PB11MP_WATCHDOG_DMA { 0, 0 } #define PB11MP_GPIO0_IRQ { IRQ_PB11MP_GPIO0, NO_IRQ } -#define PB11MP_GPIO0_DMA { 0, 0 } #define GPIO1_IRQ { IRQ_PB11MP_GPIO1, NO_IRQ } -#define GPIO1_DMA { 0, 0 } #define PB11MP_RTC_IRQ { IRQ_TC11MP_RTC, NO_IRQ } -#define PB11MP_RTC_DMA { 0, 0 } #define SCI_IRQ { IRQ_PB11MP_SCI, NO_IRQ } -#define SCI_DMA { 7, 6 } #define PB11MP_UART0_IRQ { IRQ_TC11MP_UART0, NO_IRQ } -#define PB11MP_UART0_DMA { 15, 14 } #define PB11MP_UART1_IRQ { IRQ_TC11MP_UART1, NO_IRQ } -#define PB11MP_UART1_DMA { 13, 12 } #define PB11MP_UART2_IRQ { IRQ_PB11MP_UART2, NO_IRQ } -#define PB11MP_UART2_DMA { 11, 10 } #define PB11MP_UART3_IRQ { IRQ_PB11MP_UART3, NO_IRQ } -#define PB11MP_UART3_DMA { 0x86, 0x87 } #define PB11MP_SSP_IRQ { IRQ_PB11MP_SSP, NO_IRQ } -#define PB11MP_SSP_DMA { 9, 8 } /* FPGA Primecells */ AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index f98d4fa74e3..11972df9431 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -126,47 +126,26 @@ static struct pl022_ssp_controller ssp0_plat_data = { */ #define GPIO2_IRQ { IRQ_PBA8_GPIO2, NO_IRQ } -#define GPIO2_DMA { 0, 0 } #define GPIO3_IRQ { IRQ_PBA8_GPIO3, NO_IRQ } -#define GPIO3_DMA { 0, 0 } #define AACI_IRQ { IRQ_PBA8_AACI, NO_IRQ } -#define AACI_DMA { 0x80, 0x81 } #define MMCI0_IRQ { IRQ_PBA8_MMCI0A, IRQ_PBA8_MMCI0B } -#define MMCI0_DMA { 0x84, 0 } #define KMI0_IRQ { IRQ_PBA8_KMI0, NO_IRQ } -#define KMI0_DMA { 0, 0 } #define KMI1_IRQ { IRQ_PBA8_KMI1, NO_IRQ } -#define KMI1_DMA { 0, 0 } #define PBA8_SMC_IRQ { NO_IRQ, NO_IRQ } -#define PBA8_SMC_DMA { 0, 0 } #define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_DMA { 0, 0 } #define PBA8_CLCD_IRQ { IRQ_PBA8_CLCD, NO_IRQ } -#define PBA8_CLCD_DMA { 0, 0 } #define DMAC_IRQ { IRQ_PBA8_DMAC, NO_IRQ } -#define DMAC_DMA { 0, 0 } #define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define SCTL_DMA { 0, 0 } #define PBA8_WATCHDOG_IRQ { IRQ_PBA8_WATCHDOG, NO_IRQ } -#define PBA8_WATCHDOG_DMA { 0, 0 } #define PBA8_GPIO0_IRQ { IRQ_PBA8_GPIO0, NO_IRQ } -#define PBA8_GPIO0_DMA { 0, 0 } #define GPIO1_IRQ { IRQ_PBA8_GPIO1, NO_IRQ } -#define GPIO1_DMA { 0, 0 } #define PBA8_RTC_IRQ { IRQ_PBA8_RTC, NO_IRQ } -#define PBA8_RTC_DMA { 0, 0 } #define SCI_IRQ { IRQ_PBA8_SCI, NO_IRQ } -#define SCI_DMA { 7, 6 } #define PBA8_UART0_IRQ { IRQ_PBA8_UART0, NO_IRQ } -#define PBA8_UART0_DMA { 15, 14 } #define PBA8_UART1_IRQ { IRQ_PBA8_UART1, NO_IRQ } -#define PBA8_UART1_DMA { 13, 12 } #define PBA8_UART2_IRQ { IRQ_PBA8_UART2, NO_IRQ } -#define PBA8_UART2_DMA { 11, 10 } #define PBA8_UART3_IRQ { IRQ_PBA8_UART3, NO_IRQ } -#define PBA8_UART3_DMA { 0x86, 0x87 } #define PBA8_SSP_IRQ { IRQ_PBA8_SSP, NO_IRQ } -#define PBA8_SSP_DMA { 9, 8 } /* FPGA Primecells */ AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index b0521e1bb1a..73ab3ca9355 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -148,47 +148,26 @@ static struct pl022_ssp_controller ssp0_plat_data = { */ #define GPIO2_IRQ { IRQ_PBX_GPIO2, NO_IRQ } -#define GPIO2_DMA { 0, 0 } #define GPIO3_IRQ { IRQ_PBX_GPIO3, NO_IRQ } -#define GPIO3_DMA { 0, 0 } #define AACI_IRQ { IRQ_PBX_AACI, NO_IRQ } -#define AACI_DMA { 0x80, 0x81 } #define MMCI0_IRQ { IRQ_PBX_MMCI0A, IRQ_PBX_MMCI0B } -#define MMCI0_DMA { 0x84, 0 } #define KMI0_IRQ { IRQ_PBX_KMI0, NO_IRQ } -#define KMI0_DMA { 0, 0 } #define KMI1_IRQ { IRQ_PBX_KMI1, NO_IRQ } -#define KMI1_DMA { 0, 0 } #define PBX_SMC_IRQ { NO_IRQ, NO_IRQ } -#define PBX_SMC_DMA { 0, 0 } #define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_DMA { 0, 0 } #define PBX_CLCD_IRQ { IRQ_PBX_CLCD, NO_IRQ } -#define PBX_CLCD_DMA { 0, 0 } #define DMAC_IRQ { IRQ_PBX_DMAC, NO_IRQ } -#define DMAC_DMA { 0, 0 } #define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define SCTL_DMA { 0, 0 } #define PBX_WATCHDOG_IRQ { IRQ_PBX_WATCHDOG, NO_IRQ } -#define PBX_WATCHDOG_DMA { 0, 0 } #define PBX_GPIO0_IRQ { IRQ_PBX_GPIO0, NO_IRQ } -#define PBX_GPIO0_DMA { 0, 0 } #define GPIO1_IRQ { IRQ_PBX_GPIO1, NO_IRQ } -#define GPIO1_DMA { 0, 0 } #define PBX_RTC_IRQ { IRQ_PBX_RTC, NO_IRQ } -#define PBX_RTC_DMA { 0, 0 } #define SCI_IRQ { IRQ_PBX_SCI, NO_IRQ } -#define SCI_DMA { 7, 6 } #define PBX_UART0_IRQ { IRQ_PBX_UART0, NO_IRQ } -#define PBX_UART0_DMA { 15, 14 } #define PBX_UART1_IRQ { IRQ_PBX_UART1, NO_IRQ } -#define PBX_UART1_DMA { 13, 12 } #define PBX_UART2_IRQ { IRQ_PBX_UART2, NO_IRQ } -#define PBX_UART2_DMA { 11, 10 } #define PBX_UART3_IRQ { IRQ_PBX_UART3, NO_IRQ } -#define PBX_UART3_DMA { 0x86, 0x87 } #define PBX_SSP_IRQ { IRQ_PBX_SSP, NO_IRQ } -#define PBX_SSP_DMA { 9, 8 } /* FPGA Primecells */ AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); -- cgit v1.2.3-18-g5258 From dc37c31bbfaf87118d6c827be0a38a512a40b741 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 18 Jan 2011 20:26:08 +0000 Subject: ARM: rationalize versatile family Kconfig/Makefile Move leds and sched_clock build conditionals out of the Makefile into the Kconfig file. Move selection of HAVE_SCHED_CLOCK into the platform Kconfig rather than duplicating it three times in the main architecture Kconfig. Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/Kconfig | 3 --- arch/arm/plat-versatile/Kconfig | 8 ++++++++ arch/arm/plat-versatile/Makefile | 10 +++------- 3 files changed, 11 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 4f0e83e0798..fe8d6fa12fe 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -236,7 +236,6 @@ config ARCH_REALVIEW bool "ARM Ltd. RealView family" select ARM_AMBA select CLKDEV_LOOKUP - select HAVE_SCHED_CLOCK select ICST select GENERIC_CLOCKEVENTS select ARCH_WANT_OPTIONAL_GPIOLIB @@ -252,7 +251,6 @@ config ARCH_VERSATILE select ARM_AMBA select ARM_VIC select CLKDEV_LOOKUP - select HAVE_SCHED_CLOCK select ICST select GENERIC_CLOCKEVENTS select ARCH_WANT_OPTIONAL_GPIOLIB @@ -270,7 +268,6 @@ config ARCH_VEXPRESS select CLKDEV_LOOKUP select GENERIC_CLOCKEVENTS select HAVE_CLK - select HAVE_SCHED_CLOCK select HAVE_PATA_PLATFORM select ICST select PLAT_VERSATILE diff --git a/arch/arm/plat-versatile/Kconfig b/arch/arm/plat-versatile/Kconfig index 22540f588fd..c5e2cd014c6 100644 --- a/arch/arm/plat-versatile/Kconfig +++ b/arch/arm/plat-versatile/Kconfig @@ -3,4 +3,12 @@ if PLAT_VERSATILE config PLAT_VERSATILE_CLCD bool +config PLAT_VERSATILE_LEDS + def_bool y if LEDS_CLASS + depends on ARCH_REALVIEW || ARCH_VERSATILE + +config PLAT_VERSATILE_SCHED_CLOCK + def_bool y if !ARCH_INTEGRATOR + select HAVE_SCHED_CLOCK + endif diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile index 8b3341c11ee..de6f42f003b 100644 --- a/arch/arm/plat-versatile/Makefile +++ b/arch/arm/plat-versatile/Makefile @@ -1,9 +1,5 @@ obj-y := clock.o -ifneq ($(CONFIG_ARCH_INTEGRATOR),y) -obj-y += sched-clock.o -endif -ifeq ($(CONFIG_LEDS_CLASS),y) -obj-$(CONFIG_ARCH_REALVIEW) += leds.o -obj-$(CONFIG_ARCH_VERSATILE) += leds.o -endif obj-$(CONFIG_PLAT_VERSATILE_CLCD) += clcd.o +obj-$(CONFIG_PLAT_VERSATILE_LEDS) += leds.o +obj-$(CONFIG_PLAT_VERSATILE_SCHED_CLOCK) += sched-clock.o + -- cgit v1.2.3-18-g5258 From c41b16f8c9d9dc74ed5669d4a3e3d42374c9e609 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 19 Jan 2011 15:32:15 +0000 Subject: ARM: integrator/versatile: consolidate FPGA IRQ handling code Consolidate the FPGA IRQ handling code. Integrator/AP and Versatile have one FPGA-based IRQ handler each. Integrator/CP has three. Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/Kconfig | 2 + arch/arm/mach-integrator/integrator_ap.c | 41 ++----- arch/arm/mach-integrator/integrator_cp.c | 142 ++++++------------------ arch/arm/mach-versatile/core.c | 57 +--------- arch/arm/mach-versatile/include/mach/hardware.h | 2 +- arch/arm/plat-versatile/Kconfig | 3 + arch/arm/plat-versatile/Makefile | 1 + arch/arm/plat-versatile/fpga-irq.c | 72 ++++++++++++ arch/arm/plat-versatile/include/plat/fpga-irq.h | 12 ++ 9 files changed, 140 insertions(+), 192 deletions(-) create mode 100644 arch/arm/plat-versatile/fpga-irq.c create mode 100644 arch/arm/plat-versatile/include/plat/fpga-irq.h (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index fe8d6fa12fe..a6ccef6d9d7 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -229,6 +229,7 @@ config ARCH_INTEGRATOR select ICST select GENERIC_CLOCKEVENTS select PLAT_VERSATILE + select PLAT_VERSATILE_FPGA_IRQ help Support for ARM's Integrator platform. @@ -256,6 +257,7 @@ config ARCH_VERSATILE select ARCH_WANT_OPTIONAL_GPIOLIB select PLAT_VERSATILE select PLAT_VERSATILE_CLCD + select PLAT_VERSATILE_FPGA_IRQ select ARM_TIMER_SP804 help This enables support for ARM Ltd Versatile board. diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 4f06b5d7248..980803ff348 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -48,6 +48,8 @@ #include #include +#include + #include "common.h" /* @@ -57,10 +59,10 @@ * Setup a VA for the Integrator interrupt controller (for header #0, * just for now). */ -#define VA_IC_BASE IO_ADDRESS(INTEGRATOR_IC_BASE) -#define VA_SC_BASE IO_ADDRESS(INTEGRATOR_SC_BASE) -#define VA_EBI_BASE IO_ADDRESS(INTEGRATOR_EBI_BASE) -#define VA_CMIC_BASE IO_ADDRESS(INTEGRATOR_HDR_IC) +#define VA_IC_BASE __io_address(INTEGRATOR_IC_BASE) +#define VA_SC_BASE __io_address(INTEGRATOR_SC_BASE) +#define VA_EBI_BASE __io_address(INTEGRATOR_EBI_BASE) +#define VA_CMIC_BASE __io_address(INTEGRATOR_HDR_IC) /* * Logical Physical @@ -156,27 +158,14 @@ static void __init ap_map_io(void) #define INTEGRATOR_SC_VALID_INT 0x003fffff -static void sc_mask_irq(struct irq_data *d) -{ - writel(1 << d->irq, VA_IC_BASE + IRQ_ENABLE_CLEAR); -} - -static void sc_unmask_irq(struct irq_data *d) -{ - writel(1 << d->irq, VA_IC_BASE + IRQ_ENABLE_SET); -} - -static struct irq_chip sc_chip = { - .name = "SC", - .irq_ack = sc_mask_irq, - .irq_mask = sc_mask_irq, - .irq_unmask = sc_unmask_irq, +static struct fpga_irq_data sc_irq_data = { + .base = VA_IC_BASE, + .irq_start = 0, + .chip.name = "SC", }; static void __init ap_init_irq(void) { - unsigned int i; - /* Disable all interrupts initially. */ /* Do the core module ones */ writel(-1, VA_CMIC_BASE + IRQ_ENABLE_CLEAR); @@ -185,13 +174,7 @@ static void __init ap_init_irq(void) writel(-1, VA_IC_BASE + IRQ_ENABLE_CLEAR); writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR); - for (i = 0; i < NR_IRQS; i++) { - if (((1 << i) & INTEGRATOR_SC_VALID_INT) != 0) { - set_irq_chip(i, &sc_chip); - set_irq_handler(i, handle_level_irq); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); - } - } + fpga_irq_init(-1, INTEGRATOR_SC_VALID_INT, &sc_irq_data); } #ifdef CONFIG_PM @@ -282,7 +265,7 @@ static void ap_flash_exit(void) static void ap_flash_set_vpp(int on) { - unsigned long reg = on ? SC_CTRLS : SC_CTRLC; + void __iomem *reg = on ? SC_CTRLS : SC_CTRLC; writel(INTEGRATOR_SC_CTRL_nFLVPPEN, reg); } diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index e6700aab849..05da36f754d 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -43,6 +43,7 @@ #include #include +#include #include "common.h" @@ -51,9 +52,9 @@ #define INTCP_PA_CLCD_BASE 0xc0000000 -#define INTCP_VA_CIC_BASE IO_ADDRESS(INTEGRATOR_HDR_BASE + 0x40) -#define INTCP_VA_PIC_BASE IO_ADDRESS(INTEGRATOR_IC_BASE) -#define INTCP_VA_SIC_BASE IO_ADDRESS(INTEGRATOR_CP_SIC_BASE) +#define INTCP_VA_CIC_BASE __io_address(INTEGRATOR_HDR_BASE + 0x40) +#define INTCP_VA_PIC_BASE __io_address(INTEGRATOR_IC_BASE) +#define INTCP_VA_SIC_BASE __io_address(INTEGRATOR_CP_SIC_BASE) #define INTCP_ETH_SIZE 0x10 @@ -141,129 +142,48 @@ static void __init intcp_map_io(void) iotable_init(intcp_io_desc, ARRAY_SIZE(intcp_io_desc)); } -#define cic_writel __raw_writel -#define cic_readl __raw_readl -#define pic_writel __raw_writel -#define pic_readl __raw_readl -#define sic_writel __raw_writel -#define sic_readl __raw_readl - -static void cic_mask_irq(struct irq_data *d) -{ - unsigned int irq = d->irq - IRQ_CIC_START; - cic_writel(1 << irq, INTCP_VA_CIC_BASE + IRQ_ENABLE_CLEAR); -} - -static void cic_unmask_irq(struct irq_data *d) -{ - unsigned int irq = d->irq - IRQ_CIC_START; - cic_writel(1 << irq, INTCP_VA_CIC_BASE + IRQ_ENABLE_SET); -} - -static struct irq_chip cic_chip = { - .name = "CIC", - .irq_ack = cic_mask_irq, - .irq_mask = cic_mask_irq, - .irq_unmask = cic_unmask_irq, +static struct fpga_irq_data cic_irq_data = { + .base = INTCP_VA_CIC_BASE, + .irq_start = IRQ_CIC_START, + .chip.name = "CIC", }; -static void pic_mask_irq(struct irq_data *d) -{ - unsigned int irq = d->irq - IRQ_PIC_START; - pic_writel(1 << irq, INTCP_VA_PIC_BASE + IRQ_ENABLE_CLEAR); -} - -static void pic_unmask_irq(struct irq_data *d) -{ - unsigned int irq = d->irq - IRQ_PIC_START; - pic_writel(1 << irq, INTCP_VA_PIC_BASE + IRQ_ENABLE_SET); -} - -static struct irq_chip pic_chip = { - .name = "PIC", - .irq_ack = pic_mask_irq, - .irq_mask = pic_mask_irq, - .irq_unmask = pic_unmask_irq, +static struct fpga_irq_data pic_irq_data = { + .base = INTCP_VA_PIC_BASE, + .irq_start = IRQ_PIC_START, + .chip.name = "PIC", }; -static void sic_mask_irq(struct irq_data *d) -{ - unsigned int irq = d->irq - IRQ_SIC_START; - sic_writel(1 << irq, INTCP_VA_SIC_BASE + IRQ_ENABLE_CLEAR); -} - -static void sic_unmask_irq(struct irq_data *d) -{ - unsigned int irq = d->irq - IRQ_SIC_START; - sic_writel(1 << irq, INTCP_VA_SIC_BASE + IRQ_ENABLE_SET); -} - -static struct irq_chip sic_chip = { - .name = "SIC", - .irq_ack = sic_mask_irq, - .irq_mask = sic_mask_irq, - .irq_unmask = sic_unmask_irq, +static struct fpga_irq_data sic_irq_data = { + .base = INTCP_VA_SIC_BASE, + .irq_start = IRQ_SIC_START, + .chip.name = "SIC", }; -static void -sic_handle_irq(unsigned int irq, struct irq_desc *desc) -{ - unsigned long status = sic_readl(INTCP_VA_SIC_BASE + IRQ_STATUS); - - if (status == 0) { - do_bad_IRQ(irq, desc); - return; - } - - do { - irq = ffs(status) - 1; - status &= ~(1 << irq); - - irq += IRQ_SIC_START; - - generic_handle_irq(irq); - } while (status); -} - static void __init intcp_init_irq(void) { - unsigned int i; + u32 pic_mask, sic_mask; + + pic_mask = ~((~0u) << (11 - IRQ_PIC_START)); + pic_mask |= (~((~0u) << (29 - 22))) << 22; + sic_mask = ~((~0u) << (1 + IRQ_SIC_END - IRQ_SIC_START)); /* * Disable all interrupt sources */ - pic_writel(0xffffffff, INTCP_VA_PIC_BASE + IRQ_ENABLE_CLEAR); - pic_writel(0xffffffff, INTCP_VA_PIC_BASE + FIQ_ENABLE_CLEAR); - - for (i = IRQ_PIC_START; i <= IRQ_PIC_END; i++) { - if (i == 11) - i = 22; - if (i == 29) - break; - set_irq_chip(i, &pic_chip); - set_irq_handler(i, handle_level_irq); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); - } + writel(0xffffffff, INTCP_VA_PIC_BASE + IRQ_ENABLE_CLEAR); + writel(0xffffffff, INTCP_VA_PIC_BASE + FIQ_ENABLE_CLEAR); + writel(0xffffffff, INTCP_VA_CIC_BASE + IRQ_ENABLE_CLEAR); + writel(0xffffffff, INTCP_VA_CIC_BASE + FIQ_ENABLE_CLEAR); + writel(sic_mask, INTCP_VA_SIC_BASE + IRQ_ENABLE_CLEAR); + writel(sic_mask, INTCP_VA_SIC_BASE + FIQ_ENABLE_CLEAR); - cic_writel(0xffffffff, INTCP_VA_CIC_BASE + IRQ_ENABLE_CLEAR); - cic_writel(0xffffffff, INTCP_VA_CIC_BASE + FIQ_ENABLE_CLEAR); + fpga_irq_init(-1, pic_mask, &pic_irq_data); - for (i = IRQ_CIC_START; i <= IRQ_CIC_END; i++) { - set_irq_chip(i, &cic_chip); - set_irq_handler(i, handle_level_irq); - set_irq_flags(i, IRQF_VALID); - } - - sic_writel(0x00000fff, INTCP_VA_SIC_BASE + IRQ_ENABLE_CLEAR); - sic_writel(0x00000fff, INTCP_VA_SIC_BASE + FIQ_ENABLE_CLEAR); - - for (i = IRQ_SIC_START; i <= IRQ_SIC_END; i++) { - set_irq_chip(i, &sic_chip); - set_irq_handler(i, handle_level_irq); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); - } + fpga_irq_init(-1, ~((~0u) << (1 + IRQ_CIC_END - IRQ_CIC_START)), + &cic_irq_data); - set_irq_chained_handler(IRQ_CP_CPPLDINT, sic_handle_irq); + fpga_irq_init(IRQ_CP_CPPLDINT, sic_mask, &sic_irq_data); } /* diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 630a1c96f90..eb7ffa0ee8b 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -51,6 +51,7 @@ #include #include +#include #include #include "core.h" @@ -64,47 +65,12 @@ #define VA_VIC_BASE __io_address(VERSATILE_VIC_BASE) #define VA_SIC_BASE __io_address(VERSATILE_SIC_BASE) -static void sic_mask_irq(struct irq_data *d) -{ - unsigned int irq = d->irq - IRQ_SIC_START; - - writel(1 << irq, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR); -} - -static void sic_unmask_irq(struct irq_data *d) -{ - unsigned int irq = d->irq - IRQ_SIC_START; - - writel(1 << irq, VA_SIC_BASE + SIC_IRQ_ENABLE_SET); -} - -static struct irq_chip sic_chip = { - .name = "SIC", - .irq_ack = sic_mask_irq, - .irq_mask = sic_mask_irq, - .irq_unmask = sic_unmask_irq, +static struct fpga_irq_data sic_irq = { + .base = VA_SIC_BASE, + .irq_start = IRQ_SIC_START, + .chip.name = "SIC", }; -static void -sic_handle_irq(unsigned int irq, struct irq_desc *desc) -{ - unsigned long status = readl(VA_SIC_BASE + SIC_IRQ_STATUS); - - if (status == 0) { - do_bad_IRQ(irq, desc); - return; - } - - do { - irq = ffs(status) - 1; - status &= ~(1 << irq); - - irq += IRQ_SIC_START; - - generic_handle_irq(irq); - } while (status); -} - #if 1 #define IRQ_MMCI0A IRQ_VICSOURCE22 #define IRQ_AACI IRQ_VICSOURCE24 @@ -119,22 +85,11 @@ sic_handle_irq(unsigned int irq, struct irq_desc *desc) void __init versatile_init_irq(void) { - unsigned int i; - vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0, 0); - set_irq_chained_handler(IRQ_VICSOURCE31, sic_handle_irq); - - /* Do second interrupt controller */ writel(~0, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR); - for (i = IRQ_SIC_START; i <= IRQ_SIC_END; i++) { - if ((PIC_MASK & (1 << (i - IRQ_SIC_START))) == 0) { - set_irq_chip(i, &sic_chip); - set_irq_handler(i, handle_level_irq); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); - } - } + fpga_irq_init(IRQ_VICSOURCE31, ~PIC_MASK, &sic_irq); /* * Interrupts on secondary controller from 0 to 8 are routed to diff --git a/arch/arm/mach-versatile/include/mach/hardware.h b/arch/arm/mach-versatile/include/mach/hardware.h index b5e75bb4496..6911e1f5f15 100644 --- a/arch/arm/mach-versatile/include/mach/hardware.h +++ b/arch/arm/mach-versatile/include/mach/hardware.h @@ -39,6 +39,6 @@ /* macro to get at IO space when running virtually */ #define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000) -#define __io_address(n) __io(IO_ADDRESS(n)) +#define __io_address(n) ((void __iomem __force *)IO_ADDRESS(n)) #endif diff --git a/arch/arm/plat-versatile/Kconfig b/arch/arm/plat-versatile/Kconfig index c5e2cd014c6..0b275008d3e 100644 --- a/arch/arm/plat-versatile/Kconfig +++ b/arch/arm/plat-versatile/Kconfig @@ -3,6 +3,9 @@ if PLAT_VERSATILE config PLAT_VERSATILE_CLCD bool +config PLAT_VERSATILE_FPGA_IRQ + bool + config PLAT_VERSATILE_LEDS def_bool y if LEDS_CLASS depends on ARCH_REALVIEW || ARCH_VERSATILE diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile index de6f42f003b..41f57f4b903 100644 --- a/arch/arm/plat-versatile/Makefile +++ b/arch/arm/plat-versatile/Makefile @@ -1,5 +1,6 @@ obj-y := clock.o obj-$(CONFIG_PLAT_VERSATILE_CLCD) += clcd.o +obj-$(CONFIG_PLAT_VERSATILE_FPGA_IRQ) += fpga-irq.o obj-$(CONFIG_PLAT_VERSATILE_LEDS) += leds.o obj-$(CONFIG_PLAT_VERSATILE_SCHED_CLOCK) += sched-clock.o diff --git a/arch/arm/plat-versatile/fpga-irq.c b/arch/arm/plat-versatile/fpga-irq.c new file mode 100644 index 00000000000..31d945d37e4 --- /dev/null +++ b/arch/arm/plat-versatile/fpga-irq.c @@ -0,0 +1,72 @@ +/* + * Support for Versatile FPGA-based IRQ controllers + */ +#include +#include + +#include +#include + +#define IRQ_STATUS 0x00 +#define IRQ_RAW_STATUS 0x04 +#define IRQ_ENABLE_SET 0x08 +#define IRQ_ENABLE_CLEAR 0x0c + +static void fpga_irq_mask(struct irq_data *d) +{ + struct fpga_irq_data *f = irq_data_get_irq_chip_data(d); + u32 mask = 1 << (d->irq - f->irq_start); + + writel(mask, f->base + IRQ_ENABLE_CLEAR); +} + +static void fpga_irq_unmask(struct irq_data *d) +{ + struct fpga_irq_data *f = irq_data_get_irq_chip_data(d); + u32 mask = 1 << (d->irq - f->irq_start); + + writel(mask, f->base + IRQ_ENABLE_SET); +} + +static void fpga_irq_handle(unsigned int irq, struct irq_desc *desc) +{ + struct fpga_irq_data *f = get_irq_desc_data(desc); + u32 status = readl(f->base + IRQ_STATUS); + + if (status == 0) { + do_bad_IRQ(irq, desc); + return; + } + + do { + irq = ffs(status) - 1; + status &= ~(1 << irq); + + generic_handle_irq(irq + f->irq_start); + } while (status); +} + +void __init fpga_irq_init(int parent_irq, u32 valid, struct fpga_irq_data *f) +{ + unsigned int i; + + f->chip.irq_ack = fpga_irq_mask; + f->chip.irq_mask = fpga_irq_mask; + f->chip.irq_unmask = fpga_irq_unmask; + + if (parent_irq != -1) { + set_irq_data(parent_irq, f); + set_irq_chained_handler(parent_irq, fpga_irq_handle); + } + + for (i = 0; i < 32; i++) { + if (valid & (1 << i)) { + unsigned int irq = f->irq_start + i; + + set_irq_chip_data(irq, f); + set_irq_chip(irq, &f->chip); + set_irq_handler(irq, handle_level_irq); + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + } + } +} diff --git a/arch/arm/plat-versatile/include/plat/fpga-irq.h b/arch/arm/plat-versatile/include/plat/fpga-irq.h new file mode 100644 index 00000000000..627fafd1e59 --- /dev/null +++ b/arch/arm/plat-versatile/include/plat/fpga-irq.h @@ -0,0 +1,12 @@ +#ifndef PLAT_FPGA_IRQ_H +#define PLAT_FPGA_IRQ_H + +struct fpga_irq_data { + void __iomem *base; + unsigned int irq_start; + struct irq_chip chip; +}; + +void fpga_irq_init(int, u32, struct fpga_irq_data *); + +#endif -- cgit v1.2.3-18-g5258 From cdab142a80d859984eb5e3876e0e762b1f0bded9 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 19 Jan 2011 10:07:38 +0000 Subject: ARM: realview/vexpress: consolidate localtimer support Realview and Versatile Express local timer support is identical, so consolidate the implementations. Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mach-realview/Makefile | 1 - arch/arm/mach-realview/localtimer.c | 26 -------------------------- arch/arm/mach-vexpress/Makefile | 1 - arch/arm/mach-vexpress/localtimer.c | 26 -------------------------- arch/arm/plat-versatile/Makefile | 1 + arch/arm/plat-versatile/localtimer.c | 26 ++++++++++++++++++++++++++ 6 files changed, 27 insertions(+), 54 deletions(-) delete mode 100644 arch/arm/mach-realview/localtimer.c delete mode 100644 arch/arm/mach-vexpress/localtimer.c create mode 100644 arch/arm/plat-versatile/localtimer.c (limited to 'arch') diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile index a01b76b7c95..ba85e5290b7 100644 --- a/arch/arm/mach-realview/Makefile +++ b/arch/arm/mach-realview/Makefile @@ -10,4 +10,3 @@ obj-$(CONFIG_MACH_REALVIEW_PBA8) += realview_pba8.o obj-$(CONFIG_MACH_REALVIEW_PBX) += realview_pbx.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o -obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c deleted file mode 100644 index 60b4e111f45..00000000000 --- a/arch/arm/mach-realview/localtimer.c +++ /dev/null @@ -1,26 +0,0 @@ -/* - * linux/arch/arm/mach-realview/localtimer.c - * - * Copyright (C) 2002 ARM Ltd. - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include - -#include -#include -#include - -/* - * Setup the local clock events for a CPU. - */ -void __cpuinit local_timer_setup(struct clock_event_device *evt) -{ - evt->irq = IRQ_LOCALTIMER; - twd_timer_setup(evt); -} diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile index 2c0ac7de281..cfe344ec1d6 100644 --- a/arch/arm/mach-vexpress/Makefile +++ b/arch/arm/mach-vexpress/Makefile @@ -6,4 +6,3 @@ obj-y := v2m.o obj-$(CONFIG_ARCH_VEXPRESS_CA9X4) += ct-ca9x4.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o -obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o diff --git a/arch/arm/mach-vexpress/localtimer.c b/arch/arm/mach-vexpress/localtimer.c deleted file mode 100644 index c0e3a59a0bf..00000000000 --- a/arch/arm/mach-vexpress/localtimer.c +++ /dev/null @@ -1,26 +0,0 @@ -/* - * linux/arch/arm/mach-vexpress/localtimer.c - * - * Copyright (C) 2002 ARM Ltd. - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include - -#include -#include -#include - -/* - * Setup the local clock events for a CPU. - */ -void __cpuinit local_timer_setup(struct clock_event_device *evt) -{ - evt->irq = IRQ_LOCALTIMER; - twd_timer_setup(evt); -} diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile index 41f57f4b903..b511abb1019 100644 --- a/arch/arm/plat-versatile/Makefile +++ b/arch/arm/plat-versatile/Makefile @@ -1,4 +1,5 @@ obj-y := clock.o +obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o obj-$(CONFIG_PLAT_VERSATILE_CLCD) += clcd.o obj-$(CONFIG_PLAT_VERSATILE_FPGA_IRQ) += fpga-irq.o obj-$(CONFIG_PLAT_VERSATILE_LEDS) += leds.o diff --git a/arch/arm/plat-versatile/localtimer.c b/arch/arm/plat-versatile/localtimer.c new file mode 100644 index 00000000000..83ebee56933 --- /dev/null +++ b/arch/arm/plat-versatile/localtimer.c @@ -0,0 +1,26 @@ +/* + * linux/arch/arm/plat-versatile/localtimer.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include + +#include +#include +#include + +/* + * Setup the local clock events for a CPU. + */ +void __cpuinit local_timer_setup(struct clock_event_device *evt) +{ + evt->irq = IRQ_LOCALTIMER; + twd_timer_setup(evt); +} -- cgit v1.2.3-18-g5258 From 0462b4477ea3260304bbcd97c64c0b704b4f0f85 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 19 Jan 2011 10:24:56 +0000 Subject: ARM: realview/vexpress: consolidate SMP bringup code Realview and Versatile Express share the same SMP bringup code, so consolidate the two implementations. Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mach-realview/Makefile | 2 +- arch/arm/mach-realview/headsmp.S | 40 --------------- arch/arm/mach-realview/platsmp.c | 98 ++--------------------------------- arch/arm/mach-vexpress/Makefile | 2 +- arch/arm/mach-vexpress/headsmp.S | 40 --------------- arch/arm/mach-vexpress/platsmp.c | 94 +--------------------------------- arch/arm/plat-versatile/Makefile | 2 +- arch/arm/plat-versatile/headsmp.S | 40 +++++++++++++++ arch/arm/plat-versatile/platsmp.c | 104 ++++++++++++++++++++++++++++++++++++++ 9 files changed, 152 insertions(+), 270 deletions(-) delete mode 100644 arch/arm/mach-realview/headsmp.S delete mode 100644 arch/arm/mach-vexpress/headsmp.S create mode 100644 arch/arm/plat-versatile/headsmp.S create mode 100644 arch/arm/plat-versatile/platsmp.c (limited to 'arch') diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile index ba85e5290b7..541fa4c109e 100644 --- a/arch/arm/mach-realview/Makefile +++ b/arch/arm/mach-realview/Makefile @@ -8,5 +8,5 @@ obj-$(CONFIG_MACH_REALVIEW_PB11MP) += realview_pb11mp.o obj-$(CONFIG_MACH_REALVIEW_PB1176) += realview_pb1176.o obj-$(CONFIG_MACH_REALVIEW_PBA8) += realview_pba8.o obj-$(CONFIG_MACH_REALVIEW_PBX) += realview_pbx.o -obj-$(CONFIG_SMP) += platsmp.o headsmp.o +obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-realview/headsmp.S b/arch/arm/mach-realview/headsmp.S deleted file mode 100644 index b34be4554d4..00000000000 --- a/arch/arm/mach-realview/headsmp.S +++ /dev/null @@ -1,40 +0,0 @@ -/* - * linux/arch/arm/mach-realview/headsmp.S - * - * Copyright (c) 2003 ARM Limited - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include - - __INIT - -/* - * Realview specific entry point for secondary CPUs. This provides - * a "holding pen" into which all secondary cores are held until we're - * ready for them to initialise. - */ -ENTRY(realview_secondary_startup) - mrc p15, 0, r0, c0, c0, 5 - and r0, r0, #15 - adr r4, 1f - ldmia r4, {r5, r6} - sub r4, r4, r5 - add r6, r6, r4 -pen: ldr r7, [r6] - cmp r7, r0 - bne pen - - /* - * we've been released from the holding pen: secondary_stack - * should now contain the SVC stack for this core - */ - b secondary_startup - - .align -1: .long . - .long pen_release diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index 6959d13d908..23919229e12 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -10,44 +10,21 @@ */ #include #include -#include -#include -#include #include #include -#include #include #include +#include #include #include #include #include -#include #include "core.h" -extern void realview_secondary_startup(void); - -/* - * control for which core is the next to come out of the secondary - * boot "holding pen" - */ -volatile int __cpuinitdata pen_release = -1; - -/* - * Write pen_release in a way that is guaranteed to be visible to all - * observers, irrespective of whether they're taking part in coherency - * or not. This is necessary for the hotplug code to work reliably. - */ -static void __cpuinit write_pen_release(int val) -{ - pen_release = val; - smp_wmb(); - __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release)); - outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1)); -} +extern void versatile_secondary_startup(void); static void __iomem *scu_base_addr(void) { @@ -62,75 +39,6 @@ static void __iomem *scu_base_addr(void) return (void __iomem *)0; } -static DEFINE_SPINLOCK(boot_lock); - -void __cpuinit platform_secondary_init(unsigned int cpu) -{ - /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* - * let the primary processor know we're out of the - * pen, then head off into the C entry point - */ - write_pen_release(-1); - - /* - * Synchronise with the boot thread. - */ - spin_lock(&boot_lock); - spin_unlock(&boot_lock); -} - -int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) -{ - unsigned long timeout; - - /* - * set synchronisation state between this boot processor - * and the secondary one - */ - spin_lock(&boot_lock); - - /* - * The secondary processor is waiting to be released from - * the holding pen - release it, then wait for it to flag - * that it has been released by resetting pen_release. - * - * Note that "pen_release" is the hardware CPU ID, whereas - * "cpu" is Linux's internal ID. - */ - write_pen_release(cpu); - - /* - * Send the secondary CPU a soft interrupt, thereby causing - * the boot monitor to read the system wide flags register, - * and branch to the address found there. - */ - smp_cross_call(cpumask_of(cpu), 1); - - timeout = jiffies + (1 * HZ); - while (time_before(jiffies, timeout)) { - smp_rmb(); - if (pen_release == -1) - break; - - udelay(10); - } - - /* - * now the secondary core is starting up let it run its - * calibrations, then wait for it to finish - */ - spin_unlock(&boot_lock); - - return pen_release != -1 ? -ENOSYS : 0; -} - /* * Initialise the CPU possible map early - this describes the CPUs * which may be present or become present in the system. @@ -174,6 +82,6 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus) * until it receives a soft interrupt, and then the * secondary CPU branches to this address. */ - __raw_writel(BSYM(virt_to_phys(realview_secondary_startup)), + __raw_writel(BSYM(virt_to_phys(versatile_secondary_startup)), __io_address(REALVIEW_SYS_FLAGSSET)); } diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile index cfe344ec1d6..90551b9780a 100644 --- a/arch/arm/mach-vexpress/Makefile +++ b/arch/arm/mach-vexpress/Makefile @@ -4,5 +4,5 @@ obj-y := v2m.o obj-$(CONFIG_ARCH_VEXPRESS_CA9X4) += ct-ca9x4.o -obj-$(CONFIG_SMP) += platsmp.o headsmp.o +obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-vexpress/headsmp.S b/arch/arm/mach-vexpress/headsmp.S deleted file mode 100644 index 7a3f0632947..00000000000 --- a/arch/arm/mach-vexpress/headsmp.S +++ /dev/null @@ -1,40 +0,0 @@ -/* - * linux/arch/arm/mach-vexpress/headsmp.S - * - * Copyright (c) 2003 ARM Limited - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include - - __INIT - -/* - * Versatile Express specific entry point for secondary CPUs. This - * provides a "holding pen" into which all secondary cores are held - * until we're ready for them to initialise. - */ -ENTRY(vexpress_secondary_startup) - mrc p15, 0, r0, c0, c0, 5 - and r0, r0, #15 - adr r4, 1f - ldmia r4, {r5, r6} - sub r4, r4, r5 - add r6, r6, r4 -pen: ldr r7, [r6] - cmp r7, r0 - bne pen - - /* - * we've been released from the holding pen: secondary_stack - * should now contain the SVC stack for this core - */ - b secondary_startup - - .align -1: .long . - .long pen_release diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c index 634bf1d3a31..18927023c2c 100644 --- a/arch/arm/mach-vexpress/platsmp.c +++ b/arch/arm/mach-vexpress/platsmp.c @@ -10,13 +10,9 @@ */ #include #include -#include -#include -#include #include #include -#include #include #include @@ -26,99 +22,13 @@ #include "core.h" -extern void vexpress_secondary_startup(void); - -/* - * control for which core is the next to come out of the secondary - * boot "holding pen" - */ -volatile int __cpuinitdata pen_release = -1; - -/* - * Write pen_release in a way that is guaranteed to be visible to all - * observers, irrespective of whether they're taking part in coherency - * or not. This is necessary for the hotplug code to work reliably. - */ -static void __cpuinit write_pen_release(int val) -{ - pen_release = val; - smp_wmb(); - __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release)); - outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1)); -} +extern void versatile_secondary_startup(void); static void __iomem *scu_base_addr(void) { return MMIO_P2V(A9_MPCORE_SCU); } -static DEFINE_SPINLOCK(boot_lock); - -void __cpuinit platform_secondary_init(unsigned int cpu) -{ - /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* - * let the primary processor know we're out of the - * pen, then head off into the C entry point - */ - write_pen_release(-1); - - /* - * Synchronise with the boot thread. - */ - spin_lock(&boot_lock); - spin_unlock(&boot_lock); -} - -int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) -{ - unsigned long timeout; - - /* - * Set synchronisation state between this boot processor - * and the secondary one - */ - spin_lock(&boot_lock); - - /* - * This is really belt and braces; we hold unintended secondary - * CPUs in the holding pen until we're ready for them. However, - * since we haven't sent them a soft interrupt, they shouldn't - * be there. - */ - write_pen_release(cpu); - - /* - * Send the secondary CPU a soft interrupt, thereby causing - * the boot monitor to read the system wide flags register, - * and branch to the address found there. - */ - smp_cross_call(cpumask_of(cpu), 1); - - timeout = jiffies + (1 * HZ); - while (time_before(jiffies, timeout)) { - smp_rmb(); - if (pen_release == -1) - break; - - udelay(10); - } - - /* - * now the secondary core is starting up let it run its - * calibrations, then wait for it to finish - */ - spin_unlock(&boot_lock); - - return pen_release != -1 ? -ENOSYS : 0; -} - /* * Initialise the CPU possible map early - this describes the CPUs * which may be present or become present in the system. @@ -163,6 +73,6 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus) * secondary CPU branches to this address. */ writel(~0, MMIO_P2V(V2M_SYS_FLAGSCLR)); - writel(BSYM(virt_to_phys(vexpress_secondary_startup)), + writel(BSYM(virt_to_phys(versatile_secondary_startup)), MMIO_P2V(V2M_SYS_FLAGSSET)); } diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile index b511abb1019..69714db47c3 100644 --- a/arch/arm/plat-versatile/Makefile +++ b/arch/arm/plat-versatile/Makefile @@ -4,4 +4,4 @@ obj-$(CONFIG_PLAT_VERSATILE_CLCD) += clcd.o obj-$(CONFIG_PLAT_VERSATILE_FPGA_IRQ) += fpga-irq.o obj-$(CONFIG_PLAT_VERSATILE_LEDS) += leds.o obj-$(CONFIG_PLAT_VERSATILE_SCHED_CLOCK) += sched-clock.o - +obj-$(CONFIG_SMP) += headsmp.o platsmp.o diff --git a/arch/arm/plat-versatile/headsmp.S b/arch/arm/plat-versatile/headsmp.S new file mode 100644 index 00000000000..d397a1fb2f5 --- /dev/null +++ b/arch/arm/plat-versatile/headsmp.S @@ -0,0 +1,40 @@ +/* + * linux/arch/arm/plat-versatile/headsmp.S + * + * Copyright (c) 2003 ARM Limited + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include + + __INIT + +/* + * Realview/Versatile Express specific entry point for secondary CPUs. + * This provides a "holding pen" into which all secondary cores are held + * until we're ready for them to initialise. + */ +ENTRY(versatile_secondary_startup) + mrc p15, 0, r0, c0, c0, 5 + and r0, r0, #15 + adr r4, 1f + ldmia r4, {r5, r6} + sub r4, r4, r5 + add r6, r6, r4 +pen: ldr r7, [r6] + cmp r7, r0 + bne pen + + /* + * we've been released from the holding pen: secondary_stack + * should now contain the SVC stack for this core + */ + b secondary_startup + + .align +1: .long . + .long pen_release diff --git a/arch/arm/plat-versatile/platsmp.c b/arch/arm/plat-versatile/platsmp.c new file mode 100644 index 00000000000..ba3d471d4bc --- /dev/null +++ b/arch/arm/plat-versatile/platsmp.c @@ -0,0 +1,104 @@ +/* + * linux/arch/arm/plat-versatile/platsmp.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include + +#include + +/* + * control for which core is the next to come out of the secondary + * boot "holding pen" + */ +volatile int __cpuinitdata pen_release = -1; + +/* + * Write pen_release in a way that is guaranteed to be visible to all + * observers, irrespective of whether they're taking part in coherency + * or not. This is necessary for the hotplug code to work reliably. + */ +static void __cpuinit write_pen_release(int val) +{ + pen_release = val; + smp_wmb(); + __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release)); + outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1)); +} + +static DEFINE_SPINLOCK(boot_lock); + +void __cpuinit platform_secondary_init(unsigned int cpu) +{ + /* + * if any interrupts are already enabled for the primary + * core (e.g. timer irq), then they will not have been enabled + * for us: do so + */ + gic_secondary_init(0); + + /* + * let the primary processor know we're out of the + * pen, then head off into the C entry point + */ + write_pen_release(-1); + + /* + * Synchronise with the boot thread. + */ + spin_lock(&boot_lock); + spin_unlock(&boot_lock); +} + +int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + unsigned long timeout; + + /* + * Set synchronisation state between this boot processor + * and the secondary one + */ + spin_lock(&boot_lock); + + /* + * This is really belt and braces; we hold unintended secondary + * CPUs in the holding pen until we're ready for them. However, + * since we haven't sent them a soft interrupt, they shouldn't + * be there. + */ + write_pen_release(cpu); + + /* + * Send the secondary CPU a soft interrupt, thereby causing + * the boot monitor to read the system wide flags register, + * and branch to the address found there. + */ + smp_cross_call(cpumask_of(cpu), 1); + + timeout = jiffies + (1 * HZ); + while (time_before(jiffies, timeout)) { + smp_rmb(); + if (pen_release == -1) + break; + + udelay(10); + } + + /* + * now the secondary core is starting up let it run its + * calibrations, then wait for it to finish + */ + spin_unlock(&boot_lock); + + return pen_release != -1 ? -ENOSYS : 0; +} -- cgit v1.2.3-18-g5258 From d77e270c53a4911d23ded9f4ab8b175a3fe3bb34 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 22 Jan 2011 11:37:54 +0000 Subject: ARM: integrator: add Integrator/CP sched_clock support Integrator/CP has the 24MHz counter which Versatile and later platforms also have, which we use for sched_clock support. Allow this counter to be used when building a kernel targetting Integrator/CP alone. Integrator/AP does not have this counter, so we must exclude support for the Integrator family when this is enabled. Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mach-integrator/integrator_cp.c | 7 +++++++ arch/arm/plat-versatile/Kconfig | 2 +- 2 files changed, 8 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 05da36f754d..9e3ce26023e 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -44,6 +44,7 @@ #include #include +#include #include "common.h" @@ -440,11 +441,17 @@ static struct amba_device *amba_devs[] __initdata = { &clcd_device, }; +#define REFCOUNTER (__io_address(INTEGRATOR_HDR_BASE) + 0x28) + static void __init intcp_init_early(void) { clkdev_add_table(cp_lookups, ARRAY_SIZE(cp_lookups)); integrator_init_early(); + +#ifdef CONFIG_PLAT_VERSATILE_SCHED_CLOCK + versatile_sched_clock_init(REFCOUNTER, 24000000); +#endif } static void __init intcp_init(void) diff --git a/arch/arm/plat-versatile/Kconfig b/arch/arm/plat-versatile/Kconfig index 0b275008d3e..52353beb369 100644 --- a/arch/arm/plat-versatile/Kconfig +++ b/arch/arm/plat-versatile/Kconfig @@ -11,7 +11,7 @@ config PLAT_VERSATILE_LEDS depends on ARCH_REALVIEW || ARCH_VERSATILE config PLAT_VERSATILE_SCHED_CLOCK - def_bool y if !ARCH_INTEGRATOR + def_bool y if !ARCH_INTEGRATOR_AP select HAVE_SCHED_CLOCK endif -- cgit v1.2.3-18-g5258 From 885028e4ba4caf49d565c96481e1a05220ecb517 Mon Sep 17 00:00:00 2001 From: Srinidhi Kasagar Date: Thu, 17 Feb 2011 07:03:51 +0100 Subject: ARM: 6741/1: errata: pl310 cache sync operation may be faulty The effect of cache sync operation is to drain the store buffer and wait for all internal buffers to be empty. In normal conditions, store buffer is able to merge the normal memory writes within its 32-byte data buffers. Due to this erratum present in r3p0, the effect of cache sync operation on the store buffer still remains when the operation completes. This means that the store buffer is always asked to drain and this prevents it from merging any further writes. This can severely affect performance on the write traffic esp. on Normal memory NC one. The proposed workaround is to replace the normal offset of cache sync operation(0x730) by another offset targeting an unmapped PL310 register 0x740. Signed-off-by: srinidhi kasagar Acked-by: Linus Walleij Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/Kconfig | 15 +++++++++++++++ arch/arm/include/asm/hardware/cache-l2x0.h | 1 + arch/arm/mm/cache-l2x0.c | 6 ++++++ 3 files changed, 22 insertions(+) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 26d45e5b636..ba9fc213f34 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1177,6 +1177,21 @@ config ARM_ERRATA_743622 visible impact on the overall performance or power consumption of the processor. +config ARM_ERRATA_753970 + bool "ARM errata: cache sync operation may be faulty" + depends on CACHE_PL310 + help + This option enables the workaround for the 753970 PL310 (r3p0) erratum. + + Under some condition the effect of cache sync operation on + the store buffer still remains when the operation completes. + This means that the store buffer is always asked to drain and + this prevents it from merging any further writes. The workaround + is to replace the normal offset of cache sync operation (0x730) + by another offset targeting an unmapped PL310 register 0x740. + This has the same effect as the cache sync operation: store buffer + drain and waiting for all buffers empty. + endmenu source "arch/arm/common/Kconfig" diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index 5aeec1e1735..16bd4803158 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -36,6 +36,7 @@ #define L2X0_RAW_INTR_STAT 0x21C #define L2X0_INTR_CLEAR 0x220 #define L2X0_CACHE_SYNC 0x730 +#define L2X0_DUMMY_REG 0x740 #define L2X0_INV_LINE_PA 0x770 #define L2X0_INV_WAY 0x77C #define L2X0_CLEAN_LINE_PA 0x7B0 diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 170c9bb9586..f2ce38e085d 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -49,7 +49,13 @@ static inline void cache_wait(void __iomem *reg, unsigned long mask) static inline void cache_sync(void) { void __iomem *base = l2x0_base; + +#ifdef CONFIG_ARM_ERRATA_753970 + /* write to an unmmapped register */ + writel_relaxed(0, base + L2X0_DUMMY_REG); +#else writel_relaxed(0, base + L2X0_CACHE_SYNC); +#endif cache_wait(base + L2X0_CACHE_SYNC, 1); } -- cgit v1.2.3-18-g5258 From 71efb063f4a145ae420be054f5a91dcf7c19b375 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 18 Feb 2011 16:21:06 +0100 Subject: ARM: 6742/1: pmu: avoid setting IRQ affinity on UP systems Now that we can execute a CONFIG_SMP kernel on a uniprocessor system, extra care has to be taken in the PMU IRQ affinity setting code to ensure that we don't always fail to initialise. This patch changes the CPU PMU initialisation code so that when we only have a single IRQ, whose affinity can not be changed at the controller, we report success (0) rather than -EINVAL. Reported-by: Avik Sil Acked-by: Jamie Iles Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/pmu.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c index b8af96ea62e..2c79eec1926 100644 --- a/arch/arm/kernel/pmu.c +++ b/arch/arm/kernel/pmu.c @@ -97,28 +97,34 @@ set_irq_affinity(int irq, irq, cpu); return err; #else - return 0; + return -EINVAL; #endif } static int init_cpu_pmu(void) { - int i, err = 0; + int i, irqs, err = 0; struct platform_device *pdev = pmu_devices[ARM_PMU_DEVICE_CPU]; - if (!pdev) { - err = -ENODEV; - goto out; - } + if (!pdev) + return -ENODEV; + + irqs = pdev->num_resources; + + /* + * If we have a single PMU interrupt that we can't shift, assume that + * we're running on a uniprocessor machine and continue. + */ + if (irqs == 1 && !irq_can_set_affinity(platform_get_irq(pdev, 0))) + return 0; - for (i = 0; i < pdev->num_resources; ++i) { + for (i = 0; i < irqs; ++i) { err = set_irq_affinity(platform_get_irq(pdev, i), i); if (err) break; } -out: return err; } -- cgit v1.2.3-18-g5258 From 9a27c27ce49df72b1b0062e2ad192a804e1b069b Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 18 Feb 2011 16:36:35 +0100 Subject: ARM: 6743/1: errata: interrupted ICALLUIS may prevent completion of broadcasted operation On versions of the Cortex-A9 prior to r3p0, an interrupted ICIALLUIS operation may prevent the completion of a following broadcasted operation if the second operation is received by a CPU before the ICIALLUIS has completed, potentially leading to corrupted entries in the cache or TLB. This workaround sets a bit in the diagnostic register of the Cortex-A9, causing CP15 maintenance operations to be uninterruptible. Acked-by: Catalin Marinas Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/Kconfig | 10 ++++++++++ arch/arm/mm/proc-v7.S | 6 ++++++ 2 files changed, 16 insertions(+) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index ba9fc213f34..166efa2a19c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1177,6 +1177,16 @@ config ARM_ERRATA_743622 visible impact on the overall performance or power consumption of the processor. +config ARM_ERRATA_751472 + bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation" + depends on CPU_V7 && SMP + help + This option enables the workaround for the 751472 Cortex-A9 (prior + to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the + completion of a following broadcasted operation if the second + operation is received by a CPU before the ICIALLUIS has completed, + potentially leading to corrupted entries in the cache or TLB. + config ARM_ERRATA_753970 bool "ARM errata: cache sync operation may be faulty" depends on CACHE_PL310 diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 0c1172b56b4..8e335623913 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -264,6 +264,12 @@ __v7_setup: orreq r10, r10, #1 << 6 @ set bit #6 mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register #endif +#ifdef CONFIG_ARM_ERRATA_751472 + cmp r6, #0x30 @ present prior to r3p0 + mrclt p15, 0, r10, c15, c0, 1 @ read diagnostic register + orrlt r10, r10, #1 << 11 @ set bit #11 + mcrlt p15, 0, r10, c15, c0, 1 @ write diagnostic register +#endif 3: mov r10, #0 #ifdef HARVARD_CACHE -- cgit v1.2.3-18-g5258 From 32c3fcb08178f6ca14191b22d72760984cfb75cb Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Wed, 16 Feb 2011 17:55:38 +0100 Subject: ARM: 6739/1: update .gitignore for boot/compressed Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/boot/compressed/.gitignore | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore index ab204db594d..c6028967d33 100644 --- a/arch/arm/boot/compressed/.gitignore +++ b/arch/arm/boot/compressed/.gitignore @@ -1,3 +1,7 @@ font.c -piggy.gz +lib1funcs.S +piggy.gzip +piggy.lzo +piggy.lzma +vmlinux vmlinux.lds -- cgit v1.2.3-18-g5258 From 315cfe7835c9a3fe27f15519bdeee8bf0a293e33 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 15 Feb 2011 18:06:57 +0100 Subject: ARM: 6676/1: Correct the cpu_architecture() function for ARMv7 If ID_MMFR0[3:0] >= 3, the architecture version is ARMv7. The code was currently only testing for ID_MMFR0[3:0] == 3. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/kernel/setup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 420b8d6485d..5ea4fb718b9 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -226,8 +226,8 @@ int cpu_architecture(void) * Register 0 and check for VMSAv7 or PMSAv7 */ asm("mrc p15, 0, %0, c0, c1, 4" : "=r" (mmfr0)); - if ((mmfr0 & 0x0000000f) == 0x00000003 || - (mmfr0 & 0x000000f0) == 0x00000030) + if ((mmfr0 & 0x0000000f) >= 0x00000003 || + (mmfr0 & 0x000000f0) >= 0x00000030) cpu_arch = CPU_ARCH_ARMv7; else if ((mmfr0 & 0x0000000f) == 0x00000002 || (mmfr0 & 0x000000f0) == 0x00000020) -- cgit v1.2.3-18-g5258 From 3ba6e69ad887f8a814267ed36fd4bfbddf8855a9 Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Tue, 8 Feb 2011 12:09:52 +0100 Subject: ARM: 6653/1: bitops: Use BX instead of MOV PC,LR The kernel doesn't officially need to interwork, but using BX wherever appropriate will help educate people into good assembler coding habits. BX is appropriate here because this code is predicated on __LINUX_ARM_ARCH__ >= 6 Signed-off-by: Dave Martin Acked-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/lib/bitops.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h index a9d9d152a75..10d868a5a48 100644 --- a/arch/arm/lib/bitops.h +++ b/arch/arm/lib/bitops.h @@ -12,7 +12,7 @@ strex r0, r2, [r1] cmp r0, #0 bne 1b - mov pc, lr + bx lr .endm .macro testop, instr, store @@ -33,7 +33,7 @@ smp_dmb cmp r0, #0 movne r0, #1 -2: mov pc, lr +2: bx lr .endm #else .macro bitop, instr -- cgit v1.2.3-18-g5258 From 499ef7a5c48ea9fe8034b61de304ce9f6b753fe7 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Wed, 5 Jan 2011 14:24:12 -0700 Subject: ARM: tegra: Prevent requeuing in-progress DMA requests If a request already in the queue is passed to tegra_dma_enqueue_req, tegra_dma_req.node->{next,prev} will end up pointing to itself instead of at tegra_dma_channel.list, which is the way a the end-of-list should be set up. When the DMA request completes and is list_del'd, the list head will still point at it, yet the node's next/prev will contain the list poison values. When the next DMA request completes, a kernel panic will occur when those poison values are dereferenced. This makes the DMA driver more robust in the face of buggy clients. Signed-off-by: Stephen Warren Signed-off-by: Colin Cross --- arch/arm/mach-tegra/dma.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-tegra/dma.c b/arch/arm/mach-tegra/dma.c index 250bc7baa00..4625e3ae766 100644 --- a/arch/arm/mach-tegra/dma.c +++ b/arch/arm/mach-tegra/dma.c @@ -311,6 +311,7 @@ int tegra_dma_enqueue_req(struct tegra_dma_channel *ch, struct tegra_dma_req *req) { unsigned long irq_flags; + struct tegra_dma_req *_req; int start_dma = 0; if (req->size > NV_DMA_MAX_TRASFER_SIZE || @@ -321,6 +322,13 @@ int tegra_dma_enqueue_req(struct tegra_dma_channel *ch, spin_lock_irqsave(&ch->lock, irq_flags); + list_for_each_entry(_req, &ch->list, node) { + if (req == _req) { + spin_unlock_irqrestore(&ch->lock, irq_flags); + return -EEXIST; + } + } + req->bytes_transferred = 0; req->status = 0; req->buffer_status = 0; -- cgit v1.2.3-18-g5258 From 2b15cd96e5e93f9aa4f7041c91c1e7c344a62cbb Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Fri, 18 Feb 2011 16:47:36 +0100 Subject: x86, system.h: Drop unused __SAVE/__RESTORE macros Those are unused since at least the beginning of git history. Signed-off-by: Borislav Petkov LKML-Reference: <1298044056-31104-1-git-send-email-bp@amd64.org> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/system.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h index 33ecc3ea878..12569e691ce 100644 --- a/arch/x86/include/asm/system.h +++ b/arch/x86/include/asm/system.h @@ -98,8 +98,6 @@ do { \ */ #define HAVE_DISABLE_HLT #else -#define __SAVE(reg, offset) "movq %%" #reg ",(14-" #offset ")*8(%%rsp)\n\t" -#define __RESTORE(reg, offset) "movq (14-" #offset ")*8(%%rsp),%%" #reg "\n\t" /* frame pointer must be last for get_wchan */ #define SAVE_CONTEXT "pushf ; pushq %%rbp ; movq %%rsi,%%rbp\n\t" -- cgit v1.2.3-18-g5258 From 1396fa9cd2e34669253b7ca8c75f12103481f71c Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 18 Feb 2011 12:17:16 +0300 Subject: x86, microcode, AMD: Fix signedness bug in generic_load_microcode() install_equiv_cpu_table() returns type int. It uses negative error codes so using an unsigned type breaks the error handling. Signed-off-by: Dan Carpenter Acked-by: Borislav Petkov Cc: open list:AMD MICROCODE UPD... Cc: Andreas Herrmann LKML-Reference: <20110218091716.GA4384@bicker> Signed-off-by: Ingo Molnar --- arch/x86/kernel/microcode_amd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c index 9fb8405451c..c5610384ab1 100644 --- a/arch/x86/kernel/microcode_amd.c +++ b/arch/x86/kernel/microcode_amd.c @@ -246,7 +246,7 @@ generic_load_microcode(int cpu, const u8 *data, size_t size) struct ucode_cpu_info *uci = ucode_cpu_info + cpu; struct microcode_header_amd *mc_hdr = NULL; unsigned int mc_size, leftover; - unsigned long offset; + int offset; const u8 *ucode_ptr = data; void *new_mc = NULL; unsigned int new_rev = uci->cpu_sig.rev; -- cgit v1.2.3-18-g5258 From 1ca00347c579f15b0eea1a6d4bab84e2cf56e745 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Wed, 5 Jan 2011 14:32:20 -0700 Subject: ARM: tegra: APB DMA: Enable clock and remove reset. Signed-off-by: Stephen Warren Signed-off-by: Colin Cross --- arch/arm/mach-tegra/dma.c | 14 ++++++++++++++ arch/arm/mach-tegra/tegra2_clocks.c | 6 ++++++ 2 files changed, 20 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-tegra/dma.c b/arch/arm/mach-tegra/dma.c index 4625e3ae766..2d720f2b6c7 100644 --- a/arch/arm/mach-tegra/dma.c +++ b/arch/arm/mach-tegra/dma.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include #include @@ -675,6 +676,19 @@ int __init tegra_dma_init(void) int i; unsigned int irq; void __iomem *addr; + struct clk *c; + + c = clk_get_sys("tegra-dma", NULL); + if (IS_ERR(c)) { + pr_err("Unable to get clock for APB DMA\n"); + ret = PTR_ERR(c); + goto fail; + } + ret = clk_enable(c); + if (ret != 0) { + pr_err("Unable to enable clock for APB DMA\n"); + goto fail; + } addr = IO_ADDRESS(TEGRA_APB_DMA_BASE); writel(GEN_ENABLE, addr + APB_DMA_GEN); diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c index 7a2926ae2fd..49b3edaca49 100644 --- a/arch/arm/mach-tegra/tegra2_clocks.c +++ b/arch/arm/mach-tegra/tegra2_clocks.c @@ -1759,6 +1759,11 @@ static struct clk_mux_sel mux_clk_32k[] = { { 0, 0}, }; +static struct clk_mux_sel mux_pclk[] = { + { .input = &tegra_clk_pclk, .value = 0}, + { 0, 0}, +}; + #define PERIPH_CLK(_name, _dev, _con, _clk_num, _reg, _max, _inputs, _flags) \ { \ .name = _name, \ @@ -1775,6 +1780,7 @@ static struct clk_mux_sel mux_clk_32k[] = { } struct clk tegra_periph_clks[] = { + PERIPH_CLK("apbdma", "tegra-dma", NULL, 34, 0, 108000000, mux_pclk, 0), PERIPH_CLK("rtc", "rtc-tegra", NULL, 4, 0, 32768, mux_clk_32k, PERIPH_NO_RESET), PERIPH_CLK("timer", "timer", NULL, 5, 0, 26000000, mux_clk_m, 0), PERIPH_CLK("i2s1", "i2s.0", NULL, 11, 0x100, 26000000, mux_pllaout0_audio2x_pllp_clkm, MUX | DIV_U71), -- cgit v1.2.3-18-g5258 From 375b19cd34ea9b1ab338deac20b4bd2c553bf57b Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Thu, 17 Feb 2011 08:13:57 -0800 Subject: ARM: tegra: Fix hang on reboot This seems to be a regression in 2.6.37. We cannot use writel() here since the resulting wmb() calls l2x0_cache_sync() which uses a spinlock and L1 cache may be off at this point. http://lists.infradead.org/pipermail/linux-arm-kernel/2011-February/041909.html Signed-off-by: Simon Glass Signed-off-by: Colin Cross --- arch/arm/mach-tegra/common.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c index 34559d15782..54826b805b9 100644 --- a/arch/arm/mach-tegra/common.c +++ b/arch/arm/mach-tegra/common.c @@ -39,9 +39,10 @@ void tegra_assert_system_reset(char mode, const char *cmd) void __iomem *reset = IO_ADDRESS(TEGRA_CLK_RESET_BASE + 0x04); u32 reg; - reg = readl(reset); + /* use *_related to avoid spinlock since caches are off */ + reg = readl_relaxed(reset); reg |= 0x04; - writel(reg, reset); + writel_relaxed(reg, reset); } static __initdata struct tegra_clk_init_table common_clk_init_table[] = { -- cgit v1.2.3-18-g5258 From 2b84cb4faab698b1708ce841c554546b1c9b2261 Mon Sep 17 00:00:00 2001 From: Dima Zavin Date: Thu, 2 Sep 2010 19:11:11 -0700 Subject: ARM: tegra: clock: enable clk reset for non-peripheral clocks Add a new 'reset' clk op. This can be provided for any clock, not just peripherals. Signed-off-by: Dima Zavin Acked-by: Olof Johansson Signed-off-by: Colin Cross --- arch/arm/mach-tegra/clock.h | 1 + arch/arm/mach-tegra/tegra2_clocks.c | 29 ++++++++++++++++++----------- 2 files changed, 19 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/clock.h b/arch/arm/mach-tegra/clock.h index 083a4cfc6cf..42f00c0af0d 100644 --- a/arch/arm/mach-tegra/clock.h +++ b/arch/arm/mach-tegra/clock.h @@ -86,6 +86,7 @@ struct clk_ops { int (*set_parent)(struct clk *, struct clk *); int (*set_rate)(struct clk *, unsigned long); long (*round_rate)(struct clk *, unsigned long); + void (*reset)(struct clk *, bool); }; enum clk_state { diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c index 49b3edaca49..6442abe0120 100644 --- a/arch/arm/mach-tegra/tegra2_clocks.c +++ b/arch/arm/mach-tegra/tegra2_clocks.c @@ -263,6 +263,18 @@ static struct clk_ops tegra_clk_m_ops = { .disable = tegra2_clk_m_disable, }; +void tegra2_periph_reset_assert(struct clk *c) +{ + BUG_ON(!c->ops->reset); + c->ops->reset(c, true); +} + +void tegra2_periph_reset_deassert(struct clk *c) +{ + BUG_ON(!c->ops->reset); + c->ops->reset(c, false); +} + /* super clock functions */ /* "super clocks" on tegra have two-stage muxes and a clock skipping * super divider. We will ignore the clock skipping divider, since we @@ -895,23 +907,17 @@ static void tegra2_periph_clk_disable(struct clk *c) CLK_OUT_ENB_CLR + PERIPH_CLK_TO_ENB_SET_REG(c)); } -void tegra2_periph_reset_deassert(struct clk *c) +static void tegra2_periph_clk_reset(struct clk *c, bool assert) { - pr_debug("%s on clock %s\n", __func__, c->name); - if (!(c->flags & PERIPH_NO_RESET)) - clk_writel(PERIPH_CLK_TO_ENB_BIT(c), - RST_DEVICES_CLR + PERIPH_CLK_TO_ENB_SET_REG(c)); -} + unsigned long base = assert ? RST_DEVICES_SET : RST_DEVICES_CLR; -void tegra2_periph_reset_assert(struct clk *c) -{ - pr_debug("%s on clock %s\n", __func__, c->name); + pr_debug("%s %s on clock %s\n", __func__, + assert ? "assert" : "deassert", c->name); if (!(c->flags & PERIPH_NO_RESET)) clk_writel(PERIPH_CLK_TO_ENB_BIT(c), - RST_DEVICES_SET + PERIPH_CLK_TO_ENB_SET_REG(c)); + base + PERIPH_CLK_TO_ENB_SET_REG(c)); } - static int tegra2_periph_clk_set_parent(struct clk *c, struct clk *p) { u32 val; @@ -1002,6 +1008,7 @@ static struct clk_ops tegra_periph_clk_ops = { .set_parent = &tegra2_periph_clk_set_parent, .set_rate = &tegra2_periph_clk_set_rate, .round_rate = &tegra2_periph_clk_round_rate, + .reset = &tegra2_periph_clk_reset, }; /* Clock doubler ops */ -- cgit v1.2.3-18-g5258 From 14133add42928d6759f35f5d94938adf2cda2bb6 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Wed, 8 Sep 2010 19:41:58 -0700 Subject: ARM: tegra: clock: Don't BUG on changing an enabled PLL When updating the CPU PLL frequency, keeping the PLL enabled avoids ramping the PLL all the way down and back up again. Remove the BUG_ON in tegra2_pll_clk_set_rate to allow the rate to change while the PLL is enabled. Acked-by: Olof Johansson Signed-off-by: Colin Cross --- arch/arm/mach-tegra/tegra2_clocks.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c index 6442abe0120..600a5a473ab 100644 --- a/arch/arm/mach-tegra/tegra2_clocks.c +++ b/arch/arm/mach-tegra/tegra2_clocks.c @@ -620,7 +620,6 @@ static int tegra2_pll_clk_set_rate(struct clk *c, unsigned long rate) const struct clk_pll_table *sel; pr_debug("%s: %s %lu\n", __func__, c->name, rate); - BUG_ON(c->refcnt != 0); input_rate = c->parent->rate; for (sel = c->pll_table; sel->input_rate != 0; sel++) { -- cgit v1.2.3-18-g5258 From bd41ef55e88ae03381569e51ad6ff3bab35e7b0e Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Wed, 8 Sep 2010 20:01:04 -0700 Subject: ARM: tegra: clock: Drop debugging Drop the unnecessary pr_debug calls to avoid having to maintain them. Acked-by: Olof Johansson Signed-off-by: Colin Cross --- arch/arm/mach-tegra/clock.c | 19 ++----------------- 1 file changed, 2 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c index 77948e0f490..f55bb83fb2d 100644 --- a/arch/arm/mach-tegra/clock.c +++ b/arch/arm/mach-tegra/clock.c @@ -138,7 +138,6 @@ static void clk_recalculate_rate(struct clk *c) int clk_reparent(struct clk *c, struct clk *parent) { - pr_debug("%s: %s\n", __func__, c->name); c->parent = parent; list_del(&c->sibling); list_add_tail(&c->sibling, &parent->children); @@ -148,9 +147,8 @@ int clk_reparent(struct clk *c, struct clk *parent) static void propagate_rate(struct clk *c) { struct clk *clkp; - pr_debug("%s: %s\n", __func__, c->name); + list_for_each_entry(clkp, &c->children, sibling) { - pr_debug(" %s\n", clkp->name); clk_recalculate_rate(clkp); propagate_rate(clkp); } @@ -160,8 +158,6 @@ void clk_init(struct clk *c) { unsigned long flags; - pr_debug("%s: %s\n", __func__, c->name); - spin_lock_irqsave(&clock_lock, flags); INIT_LIST_HEAD(&c->children); @@ -183,7 +179,7 @@ void clk_init(struct clk *c) int clk_enable_locked(struct clk *c) { int ret; - pr_debug("%s: %s\n", __func__, c->name); + if (c->refcnt == 0) { if (c->parent) { ret = clk_enable_locked(c->parent); @@ -247,7 +243,6 @@ EXPORT_SYMBOL(clk_enable); void clk_disable_locked(struct clk *c) { - pr_debug("%s: %s\n", __func__, c->name); if (c->refcnt == 0) { WARN(1, "Attempting to disable clock %s with refcnt 0", c->name); return; @@ -298,8 +293,6 @@ int clk_set_parent_locked(struct clk *c, struct clk *parent) { int ret; - pr_debug("%s: %s\n", __func__, c->name); - if (!c->ops || !c->ops->set_parent) return -ENOSYS; @@ -359,8 +352,6 @@ int clk_set_rate_cansleep(struct clk *c, unsigned long rate) int ret = 0; unsigned long flags; - pr_debug("%s: %s\n", __func__, c->name); - mutex_lock(&dvfs_lock); if (rate > c->rate) @@ -388,8 +379,6 @@ int clk_set_rate(struct clk *c, unsigned long rate) int ret = 0; unsigned long flags; - pr_debug("%s: %s\n", __func__, c->name); - if (clk_is_dvfs(c)) BUG(); @@ -408,8 +397,6 @@ unsigned long clk_get_rate(struct clk *c) spin_lock_irqsave(&clock_lock, flags); - pr_debug("%s: %s\n", __func__, c->name); - ret = c->rate; spin_unlock_irqrestore(&clock_lock, flags); @@ -419,8 +406,6 @@ EXPORT_SYMBOL(clk_get_rate); long clk_round_rate(struct clk *c, unsigned long rate) { - pr_debug("%s: %s\n", __func__, c->name); - if (!c->ops || !c->ops->round_rate) return -ENOSYS; -- cgit v1.2.3-18-g5258 From 35c47c3bbaa82b046d645aed2b709ce12ef0e25e Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Thu, 16 Sep 2010 14:59:49 -0700 Subject: ARM: tegra: clock: Don't use PLL lock bits The PLL lock bits are not reliable, use per-PLL timeouts instead. Acked-by: Olof Johansson Signed-off-by: Colin Cross --- arch/arm/mach-tegra/clock.h | 2 +- arch/arm/mach-tegra/tegra2_clocks.c | 31 +++++++++---------------------- 2 files changed, 10 insertions(+), 23 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/clock.h b/arch/arm/mach-tegra/clock.h index 42f00c0af0d..b76d33df88d 100644 --- a/arch/arm/mach-tegra/clock.h +++ b/arch/arm/mach-tegra/clock.h @@ -53,7 +53,6 @@ struct dvfs_process_id_table { struct dvfs_table *table; }; - struct dvfs { struct regulator *reg; struct dvfs_table *table; @@ -128,6 +127,7 @@ struct clk { unsigned long vco_min; unsigned long vco_max; const struct clk_pll_table *pll_table; + int pll_lock_delay; /* DIV */ u32 div; diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c index 600a5a473ab..eb4e9ca5c6a 100644 --- a/arch/arm/mach-tegra/tegra2_clocks.c +++ b/arch/arm/mach-tegra/tegra2_clocks.c @@ -79,7 +79,6 @@ #define PLL_BASE_ENABLE (1<<30) #define PLL_BASE_REF_ENABLE (1<<29) #define PLL_BASE_OVERRIDE (1<<28) -#define PLL_BASE_LOCK (1<<27) #define PLL_BASE_DIVP_MASK (0x7<<20) #define PLL_BASE_DIVP_SHIFT 20 #define PLL_BASE_DIVN_MASK (0x3FF<<8) @@ -94,7 +93,6 @@ #define PLL_OUT_RESET_DISABLE (1<<0) #define PLL_MISC(c) (((c)->flags & PLL_ALT_MISC_REG) ? 0x4 : 0xc) -#define PLL_MISC_LOCK_ENABLE(c) (((c)->flags & PLLU) ? (1<<22) : (1<<18)) #define PLL_MISC_DCCON_SHIFT 20 #define PLL_MISC_CPCON_SHIFT 8 @@ -546,17 +544,7 @@ static struct clk_ops tegra_blink_clk_ops = { /* PLL Functions */ static int tegra2_pll_clk_wait_for_lock(struct clk *c) { - ktime_t before; - - before = ktime_get(); - - while (!(clk_readl(c->reg + PLL_BASE) & PLL_BASE_LOCK)) { - if (ktime_us_delta(ktime_get(), before) > 5000) { - pr_err("Timed out waiting for lock bit on pll %s", - c->name); - return -1; - } - } + udelay(c->pll_lock_delay); return 0; } @@ -594,10 +582,6 @@ static int tegra2_pll_clk_enable(struct clk *c) val |= PLL_BASE_ENABLE; clk_writel(val, c->reg + PLL_BASE); - val = clk_readl(c->reg + PLL_MISC(c)); - val |= PLL_MISC_LOCK_ENABLE(c); - clk_writel(val, c->reg + PLL_MISC(c)); - tegra2_pll_clk_wait_for_lock(c); return 0; @@ -1177,6 +1161,7 @@ static struct clk tegra_pll_s = { .vco_max = 26000000, .pll_table = tegra_pll_s_table, .max_rate = 26000000, + .pll_lock_delay = 300, }; static struct clk_mux_sel tegra_clk_m_sel[] = { @@ -1213,6 +1198,7 @@ static struct clk tegra_pll_c = { .vco_max = 1400000000, .pll_table = tegra_pll_c_table, .max_rate = 600000000, + .pll_lock_delay = 300, }; static struct clk tegra_pll_c_out1 = { @@ -1251,6 +1237,7 @@ static struct clk tegra_pll_m = { .vco_max = 1200000000, .pll_table = tegra_pll_m_table, .max_rate = 800000000, + .pll_lock_delay = 300, }; static struct clk tegra_pll_m_out1 = { @@ -1289,6 +1276,7 @@ static struct clk tegra_pll_p = { .vco_max = 1400000000, .pll_table = tegra_pll_p_table, .max_rate = 432000000, + .pll_lock_delay = 300, }; static struct clk tegra_pll_p_out1 = { @@ -1354,6 +1342,7 @@ static struct clk tegra_pll_a = { .vco_max = 1400000000, .pll_table = tegra_pll_a_table, .max_rate = 56448000, + .pll_lock_delay = 300, }; static struct clk tegra_pll_a_out0 = { @@ -1399,6 +1388,7 @@ static struct clk tegra_pll_d = { .vco_max = 1000000000, .pll_table = tegra_pll_d_table, .max_rate = 1000000000, + .pll_lock_delay = 1000, }; static struct clk tegra_pll_d_out0 = { @@ -1431,6 +1421,7 @@ static struct clk tegra_pll_u = { .vco_max = 960000000, .pll_table = tegra_pll_u_table, .max_rate = 480000000, + .pll_lock_delay = 1000, }; static struct clk_pll_table tegra_pll_x_table[] = { @@ -1493,6 +1484,7 @@ static struct clk tegra_pll_x = { .vco_max = 1200000000, .pll_table = tegra_pll_x_table, .max_rate = 1000000000, + .pll_lock_delay = 300, }; static struct clk_pll_table tegra_pll_e_table[] = { @@ -1972,7 +1964,6 @@ static u32 clk_rst_suspend[RST_DEVICES_NUM + CLK_OUT_ENB_NUM + void tegra_clk_suspend(void) { unsigned long off, i; - u32 pllx_misc; u32 *ctx = clk_rst_suspend; *ctx++ = clk_readl(OSC_CTRL) & OSC_CTRL_MASK; @@ -2013,10 +2004,6 @@ void tegra_clk_suspend(void) *ctx++ = clk_readl(MISC_CLK_ENB); *ctx++ = clk_readl(CLK_MASK_ARM); - - pllx_misc = clk_readl(tegra_pll_x.reg + PLL_MISC(&tegra_pll_x)); - pllx_misc &= ~PLL_MISC_LOCK_ENABLE(&tegra_pll_x); - clk_writel(pllx_misc, tegra_pll_x.reg + PLL_MISC(&tegra_pll_x)); } void tegra_clk_resume(void) -- cgit v1.2.3-18-g5258 From e19e074b1525d11a66c8e3386fec7db248ad3005 Mon Sep 17 00:00:00 2001 From: Kushal Koolwal Date: Sat, 19 Feb 2011 13:56:03 -0800 Subject: x86: Fix reboot problem on VersaLogic Menlow boards VersaLogic Menlow based boards hang on reboot unless reboot=bios is used. Add quirk to reboot through the BIOS. Tested on at least four boards. Signed-off-by: Kushal Koolwal LKML-Reference: <1298152563-21594-1-git-send-email-kushalkoolwal@gmail.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/reboot.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index fc7aae1e2bc..715037caeb4 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -285,6 +285,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_BOARD_NAME, "P4S800"), }, }, + { /* Handle problems with rebooting on VersaLogic Menlow boards */ + .callback = set_bios_reboot, + .ident = "VersaLogic Menlow based board", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "VersaLogic Corporation"), + DMI_MATCH(DMI_BOARD_NAME, "VersaLogic Menlow board"), + }, + }, { } }; -- cgit v1.2.3-18-g5258 From f035530b799a9c945415ad2139bb6494b542639a Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Wed, 13 Oct 2010 19:16:02 -0700 Subject: ARM: tegra: clock: Initialize clocks that have no enable Assume that any clock that has no enable op is always on. Acked-by: Olof Johansson Signed-off-by: Colin Cross --- arch/arm/mach-tegra/clock.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c index f55bb83fb2d..92bcc207230 100644 --- a/arch/arm/mach-tegra/clock.c +++ b/arch/arm/mach-tegra/clock.c @@ -166,6 +166,15 @@ void clk_init(struct clk *c) if (c->ops && c->ops->init) c->ops->init(c); + if (!c->ops || !c->ops->enable) { + c->refcnt++; + c->set = 1; + if (c->parent) + c->state = c->parent->state; + else + c->state = ON; + } + clk_recalculate_rate(c); list_add(&c->node, &clocks); -- cgit v1.2.3-18-g5258 From 41cfe3676d0f4f07ba79d4f64a21450ab02d22cd Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Sat, 12 Feb 2011 15:52:04 -0800 Subject: ARM: tegra: clock: Drop CPU dvfs The existing version did not extend well to core dvfs, drop it for now until the new clk api with clk_prepare and clk_unprepare is ready and non-atomic clocks are possible. Acked-by: Olof Johansson Signed-off-by: Colin Cross --- arch/arm/mach-tegra/Makefile | 1 - arch/arm/mach-tegra/clock.c | 159 +-------------------------------- arch/arm/mach-tegra/clock.h | 24 ----- arch/arm/mach-tegra/cpu-tegra.c | 2 +- arch/arm/mach-tegra/include/mach/clk.h | 5 -- arch/arm/mach-tegra/tegra2_clocks.c | 2 - arch/arm/mach-tegra/tegra2_dvfs.c | 86 ------------------ arch/arm/mach-tegra/tegra2_dvfs.h | 20 ----- 8 files changed, 2 insertions(+), 297 deletions(-) delete mode 100644 arch/arm/mach-tegra/tegra2_dvfs.c delete mode 100644 arch/arm/mach-tegra/tegra2_dvfs.h (limited to 'arch') diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index 6b537de5a38..23de0600a19 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -9,7 +9,6 @@ obj-y += powergate.o obj-y += fuse.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += clock.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_clocks.o -obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_dvfs.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += pinmux-t2-tables.o obj-$(CONFIG_SMP) += platsmp.o localtimer.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c index 92bcc207230..8fd96bfb0cd 100644 --- a/arch/arm/mach-tegra/clock.c +++ b/arch/arm/mach-tegra/clock.c @@ -24,81 +24,14 @@ #include #include #include -#include #include -#include "clock.h" #include "board.h" -#include "fuse.h" +#include "clock.h" static LIST_HEAD(clocks); static DEFINE_SPINLOCK(clock_lock); -static DEFINE_MUTEX(dvfs_lock); - -static int clk_is_dvfs(struct clk *c) -{ - return (c->dvfs != NULL); -}; - -static int dvfs_set_rate(struct dvfs *d, unsigned long rate) -{ - struct dvfs_table *t; - - if (d->table == NULL) - return -ENODEV; - - for (t = d->table; t->rate != 0; t++) { - if (rate <= t->rate) { - if (!d->reg) - return 0; - - return regulator_set_voltage(d->reg, - t->millivolts * 1000, - d->max_millivolts * 1000); - } - } - - return -EINVAL; -} - -static void dvfs_init(struct clk *c) -{ - int process_id; - int i; - struct dvfs_table *table; - - process_id = c->dvfs->cpu ? tegra_core_process_id() : - tegra_cpu_process_id(); - - for (i = 0; i < c->dvfs->process_id_table_length; i++) - if (process_id == c->dvfs->process_id_table[i].process_id) - c->dvfs->table = c->dvfs->process_id_table[i].table; - - if (c->dvfs->table == NULL) { - pr_err("Failed to find dvfs table for clock %s process %d\n", - c->name, process_id); - return; - } - - c->dvfs->max_millivolts = 0; - for (table = c->dvfs->table; table->rate != 0; table++) - if (c->dvfs->max_millivolts < table->millivolts) - c->dvfs->max_millivolts = table->millivolts; - - c->dvfs->reg = regulator_get(NULL, c->dvfs->reg_id); - - if (IS_ERR(c->dvfs->reg)) { - pr_err("Failed to get regulator %s for clock %s\n", - c->dvfs->reg_id, c->name); - c->dvfs->reg = NULL; - return; - } - - if (c->refcnt > 0) - dvfs_set_rate(c->dvfs, c->rate); -} - struct clk *tegra_get_clock_by_name(const char *name) { struct clk *c; @@ -214,34 +147,11 @@ int clk_enable_locked(struct clk *c) return 0; } -int clk_enable_cansleep(struct clk *c) -{ - int ret; - unsigned long flags; - - mutex_lock(&dvfs_lock); - - if (clk_is_dvfs(c) && c->refcnt > 0) - dvfs_set_rate(c->dvfs, c->rate); - - spin_lock_irqsave(&clock_lock, flags); - ret = clk_enable_locked(c); - spin_unlock_irqrestore(&clock_lock, flags); - - mutex_unlock(&dvfs_lock); - - return ret; -} -EXPORT_SYMBOL(clk_enable_cansleep); - int clk_enable(struct clk *c) { int ret; unsigned long flags; - if (clk_is_dvfs(c)) - BUG(); - spin_lock_irqsave(&clock_lock, flags); ret = clk_enable_locked(c); spin_unlock_irqrestore(&clock_lock, flags); @@ -268,30 +178,10 @@ void clk_disable_locked(struct clk *c) c->refcnt--; } -void clk_disable_cansleep(struct clk *c) -{ - unsigned long flags; - - mutex_lock(&dvfs_lock); - - spin_lock_irqsave(&clock_lock, flags); - clk_disable_locked(c); - spin_unlock_irqrestore(&clock_lock, flags); - - if (clk_is_dvfs(c) && c->refcnt == 0) - dvfs_set_rate(c->dvfs, c->rate); - - mutex_unlock(&dvfs_lock); -} -EXPORT_SYMBOL(clk_disable_cansleep); - void clk_disable(struct clk *c) { unsigned long flags; - if (clk_is_dvfs(c)) - BUG(); - spin_lock_irqsave(&clock_lock, flags); clk_disable_locked(c); spin_unlock_irqrestore(&clock_lock, flags); @@ -356,41 +246,11 @@ int clk_set_rate_locked(struct clk *c, unsigned long rate) return 0; } -int clk_set_rate_cansleep(struct clk *c, unsigned long rate) -{ - int ret = 0; - unsigned long flags; - - mutex_lock(&dvfs_lock); - - if (rate > c->rate) - ret = dvfs_set_rate(c->dvfs, rate); - if (ret) - goto out; - - spin_lock_irqsave(&clock_lock, flags); - ret = clk_set_rate_locked(c, rate); - spin_unlock_irqrestore(&clock_lock, flags); - - if (ret) - goto out; - - ret = dvfs_set_rate(c->dvfs, rate); - -out: - mutex_unlock(&dvfs_lock); - return ret; -} -EXPORT_SYMBOL(clk_set_rate_cansleep); - int clk_set_rate(struct clk *c, unsigned long rate) { int ret = 0; unsigned long flags; - if (clk_is_dvfs(c)) - BUG(); - spin_lock_irqsave(&clock_lock, flags); ret = clk_set_rate_locked(c, rate); spin_unlock_irqrestore(&clock_lock, flags); @@ -503,23 +363,6 @@ void __init tegra_init_clock(void) tegra2_init_clocks(); } -int __init tegra_init_dvfs(void) -{ - struct clk *c, *safe; - - mutex_lock(&dvfs_lock); - - list_for_each_entry_safe(c, safe, &clocks, node) - if (c->dvfs) - dvfs_init(c); - - mutex_unlock(&dvfs_lock); - - return 0; -} - -late_initcall(tegra_init_dvfs); - #ifdef CONFIG_DEBUG_FS static struct dentry *clk_debugfs_root; diff --git a/arch/arm/mach-tegra/clock.h b/arch/arm/mach-tegra/clock.h index b76d33df88d..198f2344d02 100644 --- a/arch/arm/mach-tegra/clock.h +++ b/arch/arm/mach-tegra/clock.h @@ -41,28 +41,6 @@ #define ENABLE_ON_INIT (1 << 28) struct clk; -struct regulator; - -struct dvfs_table { - unsigned long rate; - int millivolts; -}; - -struct dvfs_process_id_table { - int process_id; - struct dvfs_table *table; -}; - -struct dvfs { - struct regulator *reg; - struct dvfs_table *table; - int max_millivolts; - - int process_id_table_length; - const char *reg_id; - bool cpu; - struct dvfs_process_id_table process_id_table[]; -}; struct clk_mux_sel { struct clk *input; @@ -141,8 +119,6 @@ struct clk { /* Virtual cpu clock */ struct clk *main; struct clk *backup; - - struct dvfs *dvfs; }; diff --git a/arch/arm/mach-tegra/cpu-tegra.c b/arch/arm/mach-tegra/cpu-tegra.c index ad26a9f3a13..cda03f11550 100644 --- a/arch/arm/mach-tegra/cpu-tegra.c +++ b/arch/arm/mach-tegra/cpu-tegra.c @@ -91,7 +91,7 @@ static int tegra_update_cpu_speed(unsigned long rate) freqs.old, freqs.new); #endif - ret = clk_set_rate_cansleep(cpu_clk, freqs.new * 1000); + ret = clk_set_rate(cpu_clk, freqs.new * 1000); if (ret) { pr_err("cpu-tegra: Failed to set cpu frequency to %d kHz\n", freqs.new); diff --git a/arch/arm/mach-tegra/include/mach/clk.h b/arch/arm/mach-tegra/include/mach/clk.h index a217f68ba57..633865298ae 100644 --- a/arch/arm/mach-tegra/include/mach/clk.h +++ b/arch/arm/mach-tegra/include/mach/clk.h @@ -25,9 +25,4 @@ struct clk; void tegra_periph_reset_deassert(struct clk *c); void tegra_periph_reset_assert(struct clk *c); -int clk_enable_cansleep(struct clk *clk); -void clk_disable_cansleep(struct clk *clk); -int clk_set_rate_cansleep(struct clk *clk, unsigned long rate); -int clk_set_parent_cansleep(struct clk *clk, struct clk *parent); - #endif diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c index eb4e9ca5c6a..d0b75902358 100644 --- a/arch/arm/mach-tegra/tegra2_clocks.c +++ b/arch/arm/mach-tegra/tegra2_clocks.c @@ -31,7 +31,6 @@ #include "clock.h" #include "fuse.h" -#include "tegra2_dvfs.h" #define RST_DEVICES 0x004 #define RST_DEVICES_SET 0x300 @@ -1650,7 +1649,6 @@ static struct clk tegra_clk_virtual_cpu = { .backup = &tegra_pll_p, .ops = &tegra_cpu_ops, .max_rate = 1000000000, - .dvfs = &tegra_dvfs_virtual_cpu_dvfs, }; static struct clk tegra_clk_hclk = { diff --git a/arch/arm/mach-tegra/tegra2_dvfs.c b/arch/arm/mach-tegra/tegra2_dvfs.c deleted file mode 100644 index 5529c238dd7..00000000000 --- a/arch/arm/mach-tegra/tegra2_dvfs.c +++ /dev/null @@ -1,86 +0,0 @@ -/* - * arch/arm/mach-tegra/tegra2_dvfs.c - * - * Copyright (C) 2010 Google, Inc. - * - * Author: - * Colin Cross - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include - -#include "clock.h" -#include "tegra2_dvfs.h" - -static struct dvfs_table virtual_cpu_process_0[] = { - {314000000, 750}, - {456000000, 825}, - {608000000, 900}, - {760000000, 975}, - {817000000, 1000}, - {912000000, 1050}, - {1000000000, 1100}, - {0, 0}, -}; - -static struct dvfs_table virtual_cpu_process_1[] = { - {314000000, 750}, - {456000000, 825}, - {618000000, 900}, - {770000000, 975}, - {827000000, 1000}, - {922000000, 1050}, - {1000000000, 1100}, - {0, 0}, -}; - -static struct dvfs_table virtual_cpu_process_2[] = { - {494000000, 750}, - {675000000, 825}, - {817000000, 875}, - {922000000, 925}, - {1000000000, 975}, - {0, 0}, -}; - -static struct dvfs_table virtual_cpu_process_3[] = { - {730000000, 750}, - {760000000, 775}, - {845000000, 800}, - {1000000000, 875}, - {0, 0}, -}; - -struct dvfs tegra_dvfs_virtual_cpu_dvfs = { - .reg_id = "vdd_cpu", - .process_id_table = { - { - .process_id = 0, - .table = virtual_cpu_process_0, - }, - { - .process_id = 1, - .table = virtual_cpu_process_1, - }, - { - .process_id = 2, - .table = virtual_cpu_process_2, - }, - { - .process_id = 3, - .table = virtual_cpu_process_3, - }, - }, - .process_id_table_length = 4, - .cpu = 1, -}; diff --git a/arch/arm/mach-tegra/tegra2_dvfs.h b/arch/arm/mach-tegra/tegra2_dvfs.h deleted file mode 100644 index f8c1adba96a..00000000000 --- a/arch/arm/mach-tegra/tegra2_dvfs.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * arch/arm/mach-tegra/tegra2_dvfs.h - * - * Copyright (C) 2010 Google, Inc. - * - * Author: - * Colin Cross - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -extern struct dvfs tegra_dvfs_virtual_cpu_dvfs; -- cgit v1.2.3-18-g5258 From 3ec349fbf1e88e84d4dffc54b6cb32129a32b7b0 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Sat, 12 Feb 2011 15:52:56 -0800 Subject: ARM: tegra: clock: Rearrange static clock tables Make the static clocks look more like the array of clocks so they can all be initalized with the same helper function. Acked-by: Olof Johansson Signed-off-by: Colin Cross --- arch/arm/mach-tegra/tegra2_clocks.c | 106 +++++++++++++++++------------------- 1 file changed, 51 insertions(+), 55 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c index d0b75902358..a36bda93112 100644 --- a/arch/arm/mach-tegra/tegra2_clocks.c +++ b/arch/arm/mach-tegra/tegra2_clocks.c @@ -1775,7 +1775,7 @@ static struct clk_mux_sel mux_pclk[] = { .max_rate = _max, \ } -struct clk tegra_periph_clks[] = { +struct clk tegra_list_clks[] = { PERIPH_CLK("apbdma", "tegra-dma", NULL, 34, 0, 108000000, mux_pclk, 0), PERIPH_CLK("rtc", "rtc-tegra", NULL, 4, 0, 32768, mux_clk_32k, PERIPH_NO_RESET), PERIPH_CLK("timer", "timer", NULL, 5, 0, 26000000, mux_clk_m, 0), @@ -1885,71 +1885,67 @@ struct clk_duplicate tegra_clk_duplicates[] = { .clk = ck, \ } -struct clk_lookup tegra_clk_lookups[] = { - /* external root sources */ - CLK(NULL, "32k_clk", &tegra_clk_32k), - CLK(NULL, "pll_s", &tegra_pll_s), - CLK(NULL, "clk_m", &tegra_clk_m), - CLK(NULL, "pll_m", &tegra_pll_m), - CLK(NULL, "pll_m_out1", &tegra_pll_m_out1), - CLK(NULL, "pll_c", &tegra_pll_c), - CLK(NULL, "pll_c_out1", &tegra_pll_c_out1), - CLK(NULL, "pll_p", &tegra_pll_p), - CLK(NULL, "pll_p_out1", &tegra_pll_p_out1), - CLK(NULL, "pll_p_out2", &tegra_pll_p_out2), - CLK(NULL, "pll_p_out3", &tegra_pll_p_out3), - CLK(NULL, "pll_p_out4", &tegra_pll_p_out4), - CLK(NULL, "pll_a", &tegra_pll_a), - CLK(NULL, "pll_a_out0", &tegra_pll_a_out0), - CLK(NULL, "pll_d", &tegra_pll_d), - CLK(NULL, "pll_d_out0", &tegra_pll_d_out0), - CLK(NULL, "pll_u", &tegra_pll_u), - CLK(NULL, "pll_x", &tegra_pll_x), - CLK(NULL, "pll_e", &tegra_pll_e), - CLK(NULL, "cclk", &tegra_clk_cclk), - CLK(NULL, "sclk", &tegra_clk_sclk), - CLK(NULL, "hclk", &tegra_clk_hclk), - CLK(NULL, "pclk", &tegra_clk_pclk), - CLK(NULL, "clk_d", &tegra_clk_d), - CLK(NULL, "clk_dev1", &tegra_dev1_clk), - CLK(NULL, "clk_dev2", &tegra_dev2_clk), - CLK(NULL, "cpu", &tegra_clk_virtual_cpu), - CLK(NULL, "blink", &tegra_clk_blink), -}; +struct clk *tegra_ptr_clks[] = { + &tegra_clk_32k, + &tegra_pll_s, + &tegra_clk_m, + &tegra_pll_m, + &tegra_pll_m_out1, + &tegra_pll_c, + &tegra_pll_c_out1, + &tegra_pll_p, + &tegra_pll_p_out1, + &tegra_pll_p_out2, + &tegra_pll_p_out3, + &tegra_pll_p_out4, + &tegra_pll_a, + &tegra_pll_a_out0, + &tegra_pll_d, + &tegra_pll_d_out0, + &tegra_pll_u, + &tegra_pll_x, + &tegra_pll_e, + &tegra_clk_cclk, + &tegra_clk_sclk, + &tegra_clk_hclk, + &tegra_clk_pclk, + &tegra_clk_d, + &tegra_dev1_clk, + &tegra_dev2_clk, + &tegra_clk_virtual_cpu, + &tegra_clk_blink, +}; + +static void tegra2_init_one_clock(struct clk *c) +{ + clk_init(c); + if (!c->lookup.dev_id && !c->lookup.con_id) + c->lookup.con_id = c->name; + c->lookup.clk = c; + clkdev_add(&c->lookup); +} void __init tegra2_init_clocks(void) { int i; - struct clk_lookup *cl; struct clk *c; - struct clk_duplicate *cd; - - for (i = 0; i < ARRAY_SIZE(tegra_clk_lookups); i++) { - cl = &tegra_clk_lookups[i]; - clk_init(cl->clk); - clkdev_add(cl); - } - for (i = 0; i < ARRAY_SIZE(tegra_periph_clks); i++) { - c = &tegra_periph_clks[i]; - cl = &c->lookup; - cl->clk = c; + for (i = 0; i < ARRAY_SIZE(tegra_ptr_clks); i++) + tegra2_init_one_clock(tegra_ptr_clks[i]); - clk_init(cl->clk); - clkdev_add(cl); - } + for (i = 0; i < ARRAY_SIZE(tegra_list_clks); i++) + tegra2_init_one_clock(&tegra_list_clks[i]); for (i = 0; i < ARRAY_SIZE(tegra_clk_duplicates); i++) { - cd = &tegra_clk_duplicates[i]; - c = tegra_get_clock_by_name(cd->name); - if (c) { - cl = &cd->lookup; - cl->clk = c; - clkdev_add(cl); - } else { + c = tegra_get_clock_by_name(tegra_clk_duplicates[i].name); + if (!c) { pr_err("%s: Unknown duplicate clock %s\n", __func__, - cd->name); + tegra_clk_duplicates[i].name); + continue; } + + tegra_clk_duplicates[i].lookup.clk = c; + clkdev_add(&tegra_clk_duplicates[i].lookup); } init_audio_sync_clock_mux(); -- cgit v1.2.3-18-g5258 From f151961173bf28047d01b410969f05e485f56d7e Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Sat, 12 Feb 2011 16:05:31 -0800 Subject: ARM: tegra: clock: Move unshared clk struct members into union Creates a union of a struct for each type of clock to reduce memory usage and clarify which members are used by all clocks and which are used by a single type. Acked-by: Olof Johansson Signed-off-by: Colin Cross --- arch/arm/mach-tegra/clock.h | 85 ++++++------- arch/arm/mach-tegra/tegra2_clocks.c | 234 ++++++++++++++++++++---------------- 2 files changed, 176 insertions(+), 143 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/clock.h b/arch/arm/mach-tegra/clock.h index 198f2344d02..20f0ce69bba 100644 --- a/arch/arm/mach-tegra/clock.h +++ b/arch/arm/mach-tegra/clock.h @@ -47,7 +47,7 @@ struct clk_mux_sel { u32 value; }; -struct clk_pll_table { +struct clk_pll_freq_table { unsigned long input_rate; unsigned long output_rate; u16 n; @@ -74,51 +74,54 @@ enum clk_state { struct clk { /* node for master clocks list */ - struct list_head node; - struct list_head children; /* list of children */ - struct list_head sibling; /* node for children */ -#ifdef CONFIG_DEBUG_FS - struct dentry *dent; - struct dentry *parent_dent; -#endif - struct clk_ops *ops; - struct clk *parent; - struct clk_lookup lookup; - unsigned long rate; - unsigned long max_rate; - u32 flags; - u32 refcnt; - const char *name; - u32 reg; - u32 reg_shift; - unsigned int clk_num; - enum clk_state state; + struct list_head node; /* node for list of all clocks */ + struct list_head children; /* list of children */ + struct list_head sibling; /* node for children */ + struct clk_lookup lookup; + #ifdef CONFIG_DEBUG_FS - bool set; + struct dentry *dent; + bool set; #endif + struct clk_ops *ops; + unsigned long rate; + unsigned long max_rate; + u32 flags; + const char *name; + + u32 refcnt; + enum clk_state state; + struct clk *parent; + u32 div; + u32 mul; - /* PLL */ - unsigned long input_min; - unsigned long input_max; - unsigned long cf_min; - unsigned long cf_max; - unsigned long vco_min; - unsigned long vco_max; - const struct clk_pll_table *pll_table; - int pll_lock_delay; - - /* DIV */ - u32 div; - u32 mul; - - /* MUX */ const struct clk_mux_sel *inputs; - u32 sel; - u32 reg_mask; + u32 reg; + u32 reg_shift; - /* Virtual cpu clock */ - struct clk *main; - struct clk *backup; + union { + struct { + unsigned int clk_num; + } periph; + struct { + unsigned long input_min; + unsigned long input_max; + unsigned long cf_min; + unsigned long cf_max; + unsigned long vco_min; + unsigned long vco_max; + const struct clk_pll_freq_table *freq_table; + int lock_delay; + } pll; + struct { + u32 sel; + u32 reg_mask; + } mux; + struct { + struct clk *main; + struct clk *backup; + } cpu; + } u; }; diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c index a36bda93112..324c4d33ad1 100644 --- a/arch/arm/mach-tegra/tegra2_clocks.c +++ b/arch/arm/mach-tegra/tegra2_clocks.c @@ -109,9 +109,9 @@ #define PLLE_MISC_READY (1 << 15) -#define PERIPH_CLK_TO_ENB_REG(c) ((c->clk_num / 32) * 4) -#define PERIPH_CLK_TO_ENB_SET_REG(c) ((c->clk_num / 32) * 8) -#define PERIPH_CLK_TO_ENB_BIT(c) (1 << (c->clk_num % 32)) +#define PERIPH_CLK_TO_ENB_REG(c) ((c->u.periph.clk_num / 32) * 4) +#define PERIPH_CLK_TO_ENB_SET_REG(c) ((c->u.periph.clk_num / 32) * 8) +#define PERIPH_CLK_TO_ENB_BIT(c) (1 << (c->u.periph.clk_num % 32)) #define SUPER_CLK_MUX 0x00 #define SUPER_STATE_SHIFT 28 @@ -378,24 +378,24 @@ static void tegra2_cpu_clk_disable(struct clk *c) static int tegra2_cpu_clk_set_rate(struct clk *c, unsigned long rate) { int ret; - ret = clk_set_parent_locked(c->parent, c->backup); + ret = clk_set_parent_locked(c->parent, c->u.cpu.backup); if (ret) { - pr_err("Failed to switch cpu to clock %s\n", c->backup->name); + pr_err("Failed to switch cpu to clock %s\n", c->u.cpu.backup->name); return ret; } - if (rate == c->backup->rate) + if (rate == c->u.cpu.backup->rate) goto out; - ret = clk_set_rate_locked(c->main, rate); + ret = clk_set_rate_locked(c->u.cpu.main, rate); if (ret) { pr_err("Failed to change cpu pll to %lu\n", rate); return ret; } - ret = clk_set_parent_locked(c->parent, c->main); + ret = clk_set_parent_locked(c->parent, c->u.cpu.main); if (ret) { - pr_err("Failed to switch cpu to clock %s\n", c->main->name); + pr_err("Failed to switch cpu to clock %s\n", c->u.cpu.main->name); return ret; } @@ -543,7 +543,7 @@ static struct clk_ops tegra_blink_clk_ops = { /* PLL Functions */ static int tegra2_pll_clk_wait_for_lock(struct clk *c) { - udelay(c->pll_lock_delay); + udelay(c->u.pll.lock_delay); return 0; } @@ -600,12 +600,12 @@ static int tegra2_pll_clk_set_rate(struct clk *c, unsigned long rate) { u32 val; unsigned long input_rate; - const struct clk_pll_table *sel; + const struct clk_pll_freq_table *sel; pr_debug("%s: %s %lu\n", __func__, c->name, rate); input_rate = c->parent->rate; - for (sel = c->pll_table; sel->input_rate != 0; sel++) { + for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) { if (sel->input_rate == input_rate && sel->output_rate == rate) { c->mul = sel->n; c->div = sel->m * sel->p; @@ -1138,7 +1138,7 @@ static struct clk tegra_clk_32k = { .max_rate = 32768, }; -static struct clk_pll_table tegra_pll_s_table[] = { +static struct clk_pll_freq_table tegra_pll_s_freq_table[] = { {32768, 12000000, 366, 1, 1, 0}, {32768, 13000000, 397, 1, 1, 0}, {32768, 19200000, 586, 1, 1, 0}, @@ -1150,17 +1150,19 @@ static struct clk tegra_pll_s = { .name = "pll_s", .flags = PLL_ALT_MISC_REG, .ops = &tegra_pll_ops, - .reg = 0xf0, - .input_min = 32768, - .input_max = 32768, .parent = &tegra_clk_32k, - .cf_min = 0, /* FIXME */ - .cf_max = 0, /* FIXME */ - .vco_min = 12000000, - .vco_max = 26000000, - .pll_table = tegra_pll_s_table, .max_rate = 26000000, - .pll_lock_delay = 300, + .reg = 0xf0, + .u.pll = { + .input_min = 32768, + .input_max = 32768, + .cf_min = 0, /* FIXME */ + .cf_max = 0, /* FIXME */ + .vco_min = 12000000, + .vco_max = 26000000, + .freq_table = tegra_pll_s_freq_table, + .lock_delay = 300, + }, }; static struct clk_mux_sel tegra_clk_m_sel[] = { @@ -1168,18 +1170,18 @@ static struct clk_mux_sel tegra_clk_m_sel[] = { { .input = &tegra_pll_s, .value = 1}, { 0, 0}, }; + static struct clk tegra_clk_m = { .name = "clk_m", .flags = ENABLE_ON_INIT, .ops = &tegra_clk_m_ops, .inputs = tegra_clk_m_sel, .reg = 0x1fc, - .reg_mask = (1<<28), .reg_shift = 28, .max_rate = 26000000, }; -static struct clk_pll_table tegra_pll_c_table[] = { +static struct clk_pll_freq_table tegra_pll_c_freq_table[] = { { 0, 0, 0, 0, 0, 0 }, }; @@ -1188,16 +1190,18 @@ static struct clk tegra_pll_c = { .flags = PLL_HAS_CPCON, .ops = &tegra_pll_ops, .reg = 0x80, - .input_min = 2000000, - .input_max = 31000000, .parent = &tegra_clk_m, - .cf_min = 1000000, - .cf_max = 6000000, - .vco_min = 20000000, - .vco_max = 1400000000, - .pll_table = tegra_pll_c_table, .max_rate = 600000000, - .pll_lock_delay = 300, + .u.pll = { + .input_min = 2000000, + .input_max = 31000000, + .cf_min = 1000000, + .cf_max = 6000000, + .vco_min = 20000000, + .vco_max = 1400000000, + .freq_table = tegra_pll_c_freq_table, + .lock_delay = 300, + }, }; static struct clk tegra_pll_c_out1 = { @@ -1210,7 +1214,7 @@ static struct clk tegra_pll_c_out1 = { .max_rate = 600000000, }; -static struct clk_pll_table tegra_pll_m_table[] = { +static struct clk_pll_freq_table tegra_pll_m_freq_table[] = { { 12000000, 666000000, 666, 12, 1, 8}, { 13000000, 666000000, 666, 13, 1, 8}, { 19200000, 666000000, 555, 16, 1, 8}, @@ -1227,16 +1231,18 @@ static struct clk tegra_pll_m = { .flags = PLL_HAS_CPCON, .ops = &tegra_pll_ops, .reg = 0x90, - .input_min = 2000000, - .input_max = 31000000, .parent = &tegra_clk_m, - .cf_min = 1000000, - .cf_max = 6000000, - .vco_min = 20000000, - .vco_max = 1200000000, - .pll_table = tegra_pll_m_table, .max_rate = 800000000, - .pll_lock_delay = 300, + .u.pll = { + .input_min = 2000000, + .input_max = 31000000, + .cf_min = 1000000, + .cf_max = 6000000, + .vco_min = 20000000, + .vco_max = 1200000000, + .freq_table = tegra_pll_m_freq_table, + .lock_delay = 300, + }, }; static struct clk tegra_pll_m_out1 = { @@ -1249,7 +1255,7 @@ static struct clk tegra_pll_m_out1 = { .max_rate = 600000000, }; -static struct clk_pll_table tegra_pll_p_table[] = { +static struct clk_pll_freq_table tegra_pll_p_freq_table[] = { { 12000000, 216000000, 432, 12, 2, 8}, { 13000000, 216000000, 432, 13, 2, 8}, { 19200000, 216000000, 90, 4, 2, 1}, @@ -1266,16 +1272,18 @@ static struct clk tegra_pll_p = { .flags = ENABLE_ON_INIT | PLL_FIXED | PLL_HAS_CPCON, .ops = &tegra_pll_ops, .reg = 0xa0, - .input_min = 2000000, - .input_max = 31000000, .parent = &tegra_clk_m, - .cf_min = 1000000, - .cf_max = 6000000, - .vco_min = 20000000, - .vco_max = 1400000000, - .pll_table = tegra_pll_p_table, .max_rate = 432000000, - .pll_lock_delay = 300, + .u.pll = { + .input_min = 2000000, + .input_max = 31000000, + .cf_min = 1000000, + .cf_max = 6000000, + .vco_min = 20000000, + .vco_max = 1400000000, + .freq_table = tegra_pll_p_freq_table, + .lock_delay = 300, + }, }; static struct clk tegra_pll_p_out1 = { @@ -1318,7 +1326,7 @@ static struct clk tegra_pll_p_out4 = { .max_rate = 432000000, }; -static struct clk_pll_table tegra_pll_a_table[] = { +static struct clk_pll_freq_table tegra_pll_a_freq_table[] = { { 28800000, 56448000, 49, 25, 1, 1}, { 28800000, 73728000, 64, 25, 1, 1}, { 28800000, 11289600, 49, 25, 1, 1}, @@ -1332,16 +1340,18 @@ static struct clk tegra_pll_a = { .flags = PLL_HAS_CPCON, .ops = &tegra_pll_ops, .reg = 0xb0, - .input_min = 2000000, - .input_max = 31000000, .parent = &tegra_pll_p_out1, - .cf_min = 1000000, - .cf_max = 6000000, - .vco_min = 20000000, - .vco_max = 1400000000, - .pll_table = tegra_pll_a_table, .max_rate = 56448000, - .pll_lock_delay = 300, + .u.pll = { + .input_min = 2000000, + .input_max = 31000000, + .cf_min = 1000000, + .cf_max = 6000000, + .vco_min = 20000000, + .vco_max = 1400000000, + .freq_table = tegra_pll_a_freq_table, + .lock_delay = 300, + }, }; static struct clk tegra_pll_a_out0 = { @@ -1354,7 +1364,7 @@ static struct clk tegra_pll_a_out0 = { .max_rate = 56448000, }; -static struct clk_pll_table tegra_pll_d_table[] = { +static struct clk_pll_freq_table tegra_pll_d_freq_table[] = { { 12000000, 216000000, 216, 12, 1, 4}, { 13000000, 216000000, 216, 13, 1, 4}, { 19200000, 216000000, 135, 12, 1, 3}, @@ -1378,16 +1388,18 @@ static struct clk tegra_pll_d = { .flags = PLL_HAS_CPCON | PLLD, .ops = &tegra_pll_ops, .reg = 0xd0, - .input_min = 2000000, - .input_max = 40000000, .parent = &tegra_clk_m, - .cf_min = 1000000, - .cf_max = 6000000, - .vco_min = 40000000, - .vco_max = 1000000000, - .pll_table = tegra_pll_d_table, .max_rate = 1000000000, - .pll_lock_delay = 1000, + .u.pll = { + .input_min = 2000000, + .input_max = 40000000, + .cf_min = 1000000, + .cf_max = 6000000, + .vco_min = 40000000, + .vco_max = 1000000000, + .freq_table = tegra_pll_d_freq_table, + .lock_delay = 1000, + }, }; static struct clk tegra_pll_d_out0 = { @@ -1398,7 +1410,7 @@ static struct clk tegra_pll_d_out0 = { .max_rate = 500000000, }; -static struct clk_pll_table tegra_pll_u_table[] = { +static struct clk_pll_freq_table tegra_pll_u_freq_table[] = { { 12000000, 480000000, 960, 12, 2, 0}, { 13000000, 480000000, 960, 13, 2, 0}, { 19200000, 480000000, 200, 4, 2, 0}, @@ -1411,19 +1423,21 @@ static struct clk tegra_pll_u = { .flags = PLLU, .ops = &tegra_pll_ops, .reg = 0xc0, - .input_min = 2000000, - .input_max = 40000000, .parent = &tegra_clk_m, - .cf_min = 1000000, - .cf_max = 6000000, - .vco_min = 480000000, - .vco_max = 960000000, - .pll_table = tegra_pll_u_table, .max_rate = 480000000, - .pll_lock_delay = 1000, -}; - -static struct clk_pll_table tegra_pll_x_table[] = { + .u.pll = { + .input_min = 2000000, + .input_max = 40000000, + .cf_min = 1000000, + .cf_max = 6000000, + .vco_min = 480000000, + .vco_max = 960000000, + .freq_table = tegra_pll_u_freq_table, + .lock_delay = 1000, + }, +}; + +static struct clk_pll_freq_table tegra_pll_x_freq_table[] = { /* 1 GHz */ { 12000000, 1000000000, 1000, 12, 1, 12}, { 13000000, 1000000000, 1000, 13, 1, 12}, @@ -1474,19 +1488,21 @@ static struct clk tegra_pll_x = { .flags = PLL_HAS_CPCON | PLL_ALT_MISC_REG, .ops = &tegra_pllx_ops, .reg = 0xe0, - .input_min = 2000000, - .input_max = 31000000, .parent = &tegra_clk_m, - .cf_min = 1000000, - .cf_max = 6000000, - .vco_min = 20000000, - .vco_max = 1200000000, - .pll_table = tegra_pll_x_table, .max_rate = 1000000000, - .pll_lock_delay = 300, -}; - -static struct clk_pll_table tegra_pll_e_table[] = { + .u.pll = { + .input_min = 2000000, + .input_max = 31000000, + .cf_min = 1000000, + .cf_max = 6000000, + .vco_min = 20000000, + .vco_max = 1200000000, + .freq_table = tegra_pll_x_freq_table, + .lock_delay = 300, + }, +}; + +static struct clk_pll_freq_table tegra_pll_e_freq_table[] = { { 12000000, 100000000, 200, 24, 1, 0 }, { 0, 0, 0, 0, 0, 0 }, }; @@ -1495,41 +1511,49 @@ static struct clk tegra_pll_e = { .name = "pll_e", .flags = PLL_ALT_MISC_REG, .ops = &tegra_plle_ops, - .input_min = 12000000, - .input_max = 12000000, - .max_rate = 100000000, .parent = &tegra_clk_m, .reg = 0xe8, - .pll_table = tegra_pll_e_table, + .max_rate = 100000000, + .u.pll = { + .input_min = 12000000, + .input_max = 12000000, + .freq_table = tegra_pll_e_freq_table, + }, }; static struct clk tegra_clk_d = { .name = "clk_d", .flags = PERIPH_NO_RESET, .ops = &tegra_clk_double_ops, - .clk_num = 90, .reg = 0x34, .reg_shift = 12, .parent = &tegra_clk_m, .max_rate = 52000000, + .u.periph = { + .clk_num = 90, + }, }; /* dap_mclk1, belongs to the cdev1 pingroup. */ static struct clk tegra_dev1_clk = { .name = "clk_dev1", .ops = &tegra_cdev_clk_ops, - .clk_num = 94, .rate = 26000000, .max_rate = 26000000, + .u.periph = { + .clk_num = 94, + }, }; /* dap_mclk2, belongs to the cdev2 pingroup. */ static struct clk tegra_dev2_clk = { .name = "clk_dev2", .ops = &tegra_cdev_clk_ops, - .clk_num = 93, .rate = 26000000, .max_rate = 26000000, + .u.periph = { + .clk_num = 93, + }, }; /* initialized before peripheral clocks */ @@ -1564,10 +1588,12 @@ static struct clk tegra_clk_audio_2x = { .flags = PERIPH_NO_RESET, .max_rate = 48000000, .ops = &tegra_clk_double_ops, - .clk_num = 89, .reg = 0x34, .reg_shift = 8, .parent = &tegra_clk_audio, + .u.periph = { + .clk_num = 89, + }, }; struct clk_lookup tegra_audio_clk_lookups[] = { @@ -1645,10 +1671,12 @@ static struct clk tegra_clk_sclk = { static struct clk tegra_clk_virtual_cpu = { .name = "cpu", .parent = &tegra_clk_cclk, - .main = &tegra_pll_x, - .backup = &tegra_pll_p, .ops = &tegra_cpu_ops, .max_rate = 1000000000, + .u.cpu = { + .main = &tegra_pll_x, + .backup = &tegra_pll_p, + }, }; static struct clk tegra_clk_hclk = { @@ -1768,11 +1796,13 @@ static struct clk_mux_sel mux_pclk[] = { .con_id = _con, \ }, \ .ops = &tegra_periph_clk_ops, \ - .clk_num = _clk_num, \ .reg = _reg, \ .inputs = _inputs, \ .flags = _flags, \ .max_rate = _max, \ + .u.periph = { \ + .clk_num = _clk_num, \ + }, \ } struct clk tegra_list_clks[] = { -- cgit v1.2.3-18-g5258 From 4729fd7a7dfe7847b4870801ad12222adaeb016c Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Sat, 12 Feb 2011 16:43:05 -0800 Subject: ARM: tegra: clock: Convert global lock to a lock per clock Give each clock its own lock, and remove all lock traversals from parent to child clocks to prevent AB-BA deadlocks. This brings the locking in line with the common struct clk patches and should make conversion simple. Acked-by: Olof Johansson Signed-off-by: Colin Cross --- arch/arm/mach-tegra/clock.c | 351 +++++++++++++++++++++------------ arch/arm/mach-tegra/clock.h | 14 +- arch/arm/mach-tegra/include/mach/clk.h | 1 + arch/arm/mach-tegra/tegra2_clocks.c | 119 +++++++---- 4 files changed, 318 insertions(+), 167 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c index 8fd96bfb0cd..aff4c5b8c37 100644 --- a/arch/arm/mach-tegra/clock.c +++ b/arch/arm/mach-tegra/clock.c @@ -18,83 +18,117 @@ #include #include -#include +#include +#include +#include #include +#include #include -#include -#include +#include #include -#include +#include + +#include #include "board.h" #include "clock.h" +/* + * Locking: + * + * Each struct clk has a spinlock. + * + * To avoid AB-BA locking problems, locks must always be traversed from child + * clock to parent clock. For example, when enabling a clock, the clock's lock + * is taken, and then clk_enable is called on the parent, which take's the + * parent clock's lock. There is one exceptions to this ordering: When dumping + * the clock tree through debugfs. In this case, clk_lock_all is called, + * which attemps to iterate through the entire list of clocks and take every + * clock lock. If any call to spin_trylock fails, all locked clocks are + * unlocked, and the process is retried. When all the locks are held, + * the only clock operation that can be called is clk_get_rate_all_locked. + * + * Within a single clock, no clock operation can call another clock operation + * on itself, except for clk_get_rate_locked and clk_set_rate_locked. Any + * clock operation can call any other clock operation on any of it's possible + * parents. + * + * An additional mutex, clock_list_lock, is used to protect the list of all + * clocks. + * + * The clock operations must lock internally to protect against + * read-modify-write on registers that are shared by multiple clocks + */ +static DEFINE_MUTEX(clock_list_lock); static LIST_HEAD(clocks); -static DEFINE_SPINLOCK(clock_lock); struct clk *tegra_get_clock_by_name(const char *name) { struct clk *c; struct clk *ret = NULL; - unsigned long flags; - spin_lock_irqsave(&clock_lock, flags); + mutex_lock(&clock_list_lock); list_for_each_entry(c, &clocks, node) { if (strcmp(c->name, name) == 0) { ret = c; break; } } - spin_unlock_irqrestore(&clock_lock, flags); + mutex_unlock(&clock_list_lock); return ret; } -static void clk_recalculate_rate(struct clk *c) +/* Must be called with c->spinlock held */ +static unsigned long clk_predict_rate_from_parent(struct clk *c, struct clk *p) { u64 rate; - if (!c->parent) - return; - - rate = c->parent->rate; + rate = clk_get_rate(p); if (c->mul != 0 && c->div != 0) { - rate = rate * c->mul; + rate *= c->mul; do_div(rate, c->div); } - if (rate > c->max_rate) - pr_warn("clocks: Set clock %s to rate %llu, max is %lu\n", - c->name, rate, c->max_rate); - - c->rate = rate; + return rate; } -int clk_reparent(struct clk *c, struct clk *parent) +/* Must be called with c->spinlock held */ +unsigned long clk_get_rate_locked(struct clk *c) { - c->parent = parent; - list_del(&c->sibling); - list_add_tail(&c->sibling, &parent->children); - return 0; -} + unsigned long rate; -static void propagate_rate(struct clk *c) -{ - struct clk *clkp; + if (c->parent) + rate = clk_predict_rate_from_parent(c, c->parent); + else + rate = c->rate; - list_for_each_entry(clkp, &c->children, sibling) { - clk_recalculate_rate(clkp); - propagate_rate(clkp); - } + return rate; } -void clk_init(struct clk *c) +unsigned long clk_get_rate(struct clk *c) { unsigned long flags; + unsigned long rate; - spin_lock_irqsave(&clock_lock, flags); + spin_lock_irqsave(&c->spinlock, flags); - INIT_LIST_HEAD(&c->children); - INIT_LIST_HEAD(&c->sibling); + rate = clk_get_rate_locked(c); + + spin_unlock_irqrestore(&c->spinlock, flags); + + return rate; +} +EXPORT_SYMBOL(clk_get_rate); + +int clk_reparent(struct clk *c, struct clk *parent) +{ + c->parent = parent; + return 0; +} + +void clk_init(struct clk *c) +{ + spin_lock_init(&c->spinlock); if (c->ops && c->ops->init) c->ops->init(c); @@ -108,33 +142,31 @@ void clk_init(struct clk *c) c->state = ON; } - clk_recalculate_rate(c); - + mutex_lock(&clock_list_lock); list_add(&c->node, &clocks); - - if (c->parent) - list_add_tail(&c->sibling, &c->parent->children); - - spin_unlock_irqrestore(&clock_lock, flags); + mutex_unlock(&clock_list_lock); } -int clk_enable_locked(struct clk *c) +int clk_enable(struct clk *c) { - int ret; + int ret = 0; + unsigned long flags; + + spin_lock_irqsave(&c->spinlock, flags); if (c->refcnt == 0) { if (c->parent) { - ret = clk_enable_locked(c->parent); + ret = clk_enable(c->parent); if (ret) - return ret; + goto out; } if (c->ops && c->ops->enable) { ret = c->ops->enable(c); if (ret) { if (c->parent) - clk_disable_locked(c->parent); - return ret; + clk_disable(c->parent); + goto out; } c->state = ON; #ifdef CONFIG_DEBUG_FS @@ -143,27 +175,21 @@ int clk_enable_locked(struct clk *c) } } c->refcnt++; - - return 0; +out: + spin_unlock_irqrestore(&c->spinlock, flags); + return ret; } +EXPORT_SYMBOL(clk_enable); -int clk_enable(struct clk *c) +void clk_disable(struct clk *c) { - int ret; unsigned long flags; - spin_lock_irqsave(&clock_lock, flags); - ret = clk_enable_locked(c); - spin_unlock_irqrestore(&clock_lock, flags); + spin_lock_irqsave(&c->spinlock, flags); - return ret; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable_locked(struct clk *c) -{ if (c->refcnt == 0) { WARN(1, "Attempting to disable clock %s with refcnt 0", c->name); + spin_unlock_irqrestore(&c->spinlock, flags); return; } if (c->refcnt == 1) { @@ -171,49 +197,39 @@ void clk_disable_locked(struct clk *c) c->ops->disable(c); if (c->parent) - clk_disable_locked(c->parent); + clk_disable(c->parent); c->state = OFF; } c->refcnt--; -} -void clk_disable(struct clk *c) -{ - unsigned long flags; - - spin_lock_irqsave(&clock_lock, flags); - clk_disable_locked(c); - spin_unlock_irqrestore(&clock_lock, flags); + spin_unlock_irqrestore(&c->spinlock, flags); } EXPORT_SYMBOL(clk_disable); -int clk_set_parent_locked(struct clk *c, struct clk *parent) +int clk_set_parent(struct clk *c, struct clk *parent) { int ret; + unsigned long flags; + unsigned long new_rate; + unsigned long old_rate; - if (!c->ops || !c->ops->set_parent) - return -ENOSYS; + spin_lock_irqsave(&c->spinlock, flags); - ret = c->ops->set_parent(c, parent); - - if (ret) - return ret; - - clk_recalculate_rate(c); + if (!c->ops || !c->ops->set_parent) { + ret = -ENOSYS; + goto out; + } - propagate_rate(c); + new_rate = clk_predict_rate_from_parent(c, parent); + old_rate = clk_get_rate_locked(c); - return 0; -} + ret = c->ops->set_parent(c, parent); + if (ret) + goto out; -int clk_set_parent(struct clk *c, struct clk *parent) -{ - int ret; - unsigned long flags; - spin_lock_irqsave(&clock_lock, flags); - ret = clk_set_parent_locked(c, parent); - spin_unlock_irqrestore(&clock_lock, flags); +out: + spin_unlock_irqrestore(&c->spinlock, flags); return ret; } EXPORT_SYMBOL(clk_set_parent); @@ -226,62 +242,75 @@ EXPORT_SYMBOL(clk_get_parent); int clk_set_rate_locked(struct clk *c, unsigned long rate) { - int ret; - - if (rate > c->max_rate) - rate = c->max_rate; - if (!c->ops || !c->ops->set_rate) return -ENOSYS; - ret = c->ops->set_rate(c, rate); - - if (ret) - return ret; - - clk_recalculate_rate(c); - - propagate_rate(c); + if (rate > c->max_rate) + rate = c->max_rate; - return 0; + return c->ops->set_rate(c, rate); } int clk_set_rate(struct clk *c, unsigned long rate) { - int ret = 0; + int ret; unsigned long flags; - spin_lock_irqsave(&clock_lock, flags); + spin_lock_irqsave(&c->spinlock, flags); + ret = clk_set_rate_locked(c, rate); - spin_unlock_irqrestore(&clock_lock, flags); + + spin_unlock_irqrestore(&c->spinlock, flags); return ret; } EXPORT_SYMBOL(clk_set_rate); -unsigned long clk_get_rate(struct clk *c) -{ - unsigned long flags; - unsigned long ret; - spin_lock_irqsave(&clock_lock, flags); +/* Must be called with clocks lock and all indvidual clock locks held */ +unsigned long clk_get_rate_all_locked(struct clk *c) +{ + u64 rate; + int mul = 1; + int div = 1; + struct clk *p = c; + + while (p) { + c = p; + if (c->mul != 0 && c->div != 0) { + mul *= c->mul; + div *= c->div; + } + p = c->parent; + } - ret = c->rate; + rate = c->rate; + rate *= mul; + do_div(rate, div); - spin_unlock_irqrestore(&clock_lock, flags); - return ret; + return rate; } -EXPORT_SYMBOL(clk_get_rate); long clk_round_rate(struct clk *c, unsigned long rate) { - if (!c->ops || !c->ops->round_rate) - return -ENOSYS; + unsigned long flags; + long ret; + + spin_lock_irqsave(&c->spinlock, flags); + + if (!c->ops || !c->ops->round_rate) { + ret = -ENOSYS; + goto out; + } if (rate > c->max_rate) rate = c->max_rate; - return c->ops->round_rate(c, rate); + ret = c->ops->round_rate(c, rate); + +out: + spin_unlock_irqrestore(&c->spinlock, flags); + return ret; } EXPORT_SYMBOL(clk_round_rate); @@ -364,13 +393,75 @@ void __init tegra_init_clock(void) } #ifdef CONFIG_DEBUG_FS + +static int __clk_lock_all_spinlocks(void) +{ + struct clk *c; + + list_for_each_entry(c, &clocks, node) + if (!spin_trylock(&c->spinlock)) + goto unlock_spinlocks; + + return 0; + +unlock_spinlocks: + list_for_each_entry_continue_reverse(c, &clocks, node) + spin_unlock(&c->spinlock); + + return -EAGAIN; +} + +static void __clk_unlock_all_spinlocks(void) +{ + struct clk *c; + + list_for_each_entry_reverse(c, &clocks, node) + spin_unlock(&c->spinlock); +} + +/* + * This function retries until it can take all locks, and may take + * an arbitrarily long time to complete. + * Must be called with irqs enabled, returns with irqs disabled + * Must be called with clock_list_lock held + */ +static void clk_lock_all(void) +{ + int ret; +retry: + local_irq_disable(); + + ret = __clk_lock_all_spinlocks(); + if (ret) + goto failed_spinlocks; + + /* All locks taken successfully, return */ + return; + +failed_spinlocks: + local_irq_enable(); + yield(); + goto retry; +} + +/* + * Unlocks all clocks after a clk_lock_all + * Must be called with irqs disabled, returns with irqs enabled + * Must be called with clock_list_lock held + */ +static void clk_unlock_all(void) +{ + __clk_unlock_all_spinlocks(); + + local_irq_enable(); +} + static struct dentry *clk_debugfs_root; static void clock_tree_show_one(struct seq_file *s, struct clk *c, int level) { struct clk *child; - struct clk *safe; const char *state = "uninit"; char div[8] = {0}; @@ -401,8 +492,12 @@ static void clock_tree_show_one(struct seq_file *s, struct clk *c, int level) c->rate > c->max_rate ? '!' : ' ', !c->set ? '*' : ' ', 30 - level * 3, c->name, - state, c->refcnt, div, c->rate); - list_for_each_entry_safe(child, safe, &c->children, sibling) { + state, c->refcnt, div, clk_get_rate_all_locked(c)); + + list_for_each_entry(child, &clocks, node) { + if (child->parent != c) + continue; + clock_tree_show_one(s, child, level + 1); } } @@ -410,14 +505,20 @@ static void clock_tree_show_one(struct seq_file *s, struct clk *c, int level) static int clock_tree_show(struct seq_file *s, void *data) { struct clk *c; - unsigned long flags; seq_printf(s, " clock state ref div rate\n"); seq_printf(s, "--------------------------------------------------------------\n"); - spin_lock_irqsave(&clock_lock, flags); + + mutex_lock(&clock_list_lock); + + clk_lock_all(); + list_for_each_entry(c, &clocks, node) if (c->parent == NULL) clock_tree_show_one(s, c, 0); - spin_unlock_irqrestore(&clock_lock, flags); + + clk_unlock_all(); + + mutex_unlock(&clock_list_lock); return 0; } diff --git a/arch/arm/mach-tegra/clock.h b/arch/arm/mach-tegra/clock.h index 20f0ce69bba..a63dbf93d9b 100644 --- a/arch/arm/mach-tegra/clock.h +++ b/arch/arm/mach-tegra/clock.h @@ -20,8 +20,9 @@ #ifndef __MACH_TEGRA_CLOCK_H #define __MACH_TEGRA_CLOCK_H -#include #include +#include +#include #define DIV_BUS (1 << 0) #define DIV_U71 (1 << 1) @@ -75,8 +76,6 @@ enum clk_state { struct clk { /* node for master clocks list */ struct list_head node; /* node for list of all clocks */ - struct list_head children; /* list of children */ - struct list_head sibling; /* node for children */ struct clk_lookup lookup; #ifdef CONFIG_DEBUG_FS @@ -122,8 +121,9 @@ struct clk { struct clk *backup; } cpu; } u; -}; + spinlock_t spinlock; +}; struct clk_duplicate { const char *name; @@ -143,11 +143,9 @@ void tegra2_periph_reset_assert(struct clk *c); void clk_init(struct clk *clk); struct clk *tegra_get_clock_by_name(const char *name); unsigned long clk_measure_input_freq(void); -void clk_disable_locked(struct clk *c); -int clk_enable_locked(struct clk *c); -int clk_set_parent_locked(struct clk *c, struct clk *parent); -int clk_set_rate_locked(struct clk *c, unsigned long rate); int clk_reparent(struct clk *c, struct clk *parent); void tegra_clk_init_from_table(struct tegra_clk_init_table *table); +unsigned long clk_get_rate_locked(struct clk *c); +int clk_set_rate_locked(struct clk *c, unsigned long rate); #endif diff --git a/arch/arm/mach-tegra/include/mach/clk.h b/arch/arm/mach-tegra/include/mach/clk.h index 633865298ae..fa7f9ca1fdb 100644 --- a/arch/arm/mach-tegra/include/mach/clk.h +++ b/arch/arm/mach-tegra/include/mach/clk.h @@ -25,4 +25,5 @@ struct clk; void tegra_periph_reset_deassert(struct clk *c); void tegra_periph_reset_assert(struct clk *c); +unsigned long clk_get_rate_all_locked(struct clk *c); #endif diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c index 324c4d33ad1..ea07f513e90 100644 --- a/arch/arm/mach-tegra/tegra2_clocks.c +++ b/arch/arm/mach-tegra/tegra2_clocks.c @@ -23,8 +23,8 @@ #include #include #include -#include #include +#include #include #include @@ -147,6 +147,13 @@ static void __iomem *reg_clk_base = IO_ADDRESS(TEGRA_CLK_RESET_BASE); static void __iomem *reg_pmc_base = IO_ADDRESS(TEGRA_PMC_BASE); +/* + * Some clocks share a register with other clocks. Any clock op that + * non-atomically modifies a register used by another clock must lock + * clock_register_lock first. + */ +static DEFINE_SPINLOCK(clock_register_lock); + #define clk_writel(value, reg) \ __raw_writel(value, (u32)reg_clk_base + (reg)) #define clk_readl(reg) \ @@ -330,12 +337,12 @@ static int tegra2_super_clk_set_parent(struct clk *c, struct clk *p) val |= sel->value << shift; if (c->refcnt) - clk_enable_locked(p); + clk_enable(p); clk_writel(val, c->reg); if (c->refcnt && c->parent) - clk_disable_locked(c->parent); + clk_disable(c->parent); clk_reparent(c, p); return 0; @@ -378,22 +385,22 @@ static void tegra2_cpu_clk_disable(struct clk *c) static int tegra2_cpu_clk_set_rate(struct clk *c, unsigned long rate) { int ret; - ret = clk_set_parent_locked(c->parent, c->u.cpu.backup); + ret = clk_set_parent(c->parent, c->u.cpu.backup); if (ret) { pr_err("Failed to switch cpu to clock %s\n", c->u.cpu.backup->name); return ret; } - if (rate == c->u.cpu.backup->rate) + if (rate == clk_get_rate(c->u.cpu.backup)) goto out; - ret = clk_set_rate_locked(c->u.cpu.main, rate); + ret = clk_set_rate(c->u.cpu.main, rate); if (ret) { pr_err("Failed to change cpu pll to %lu\n", rate); return ret; } - ret = clk_set_parent_locked(c->parent, c->u.cpu.main); + ret = clk_set_parent(c->parent, c->u.cpu.main); if (ret) { pr_err("Failed to switch cpu to clock %s\n", c->u.cpu.main->name); return ret; @@ -421,24 +428,45 @@ static void tegra2_bus_clk_init(struct clk *c) static int tegra2_bus_clk_enable(struct clk *c) { - u32 val = clk_readl(c->reg); + u32 val; + unsigned long flags; + + spin_lock_irqsave(&clock_register_lock, flags); + + val = clk_readl(c->reg); val &= ~(BUS_CLK_DISABLE << c->reg_shift); clk_writel(val, c->reg); + + spin_unlock_irqrestore(&clock_register_lock, flags); + return 0; } static void tegra2_bus_clk_disable(struct clk *c) { - u32 val = clk_readl(c->reg); + u32 val; + unsigned long flags; + + spin_lock_irqsave(&clock_register_lock, flags); + + val = clk_readl(c->reg); val |= BUS_CLK_DISABLE << c->reg_shift; clk_writel(val, c->reg); + + spin_unlock_irqrestore(&clock_register_lock, flags); } static int tegra2_bus_clk_set_rate(struct clk *c, unsigned long rate) { - u32 val = clk_readl(c->reg); - unsigned long parent_rate = c->parent->rate; + u32 val; + unsigned long parent_rate = clk_get_rate(c->parent); + unsigned long flags; + int ret = -EINVAL; int i; + + spin_lock_irqsave(&clock_register_lock, flags); + + val = clk_readl(c->reg); for (i = 1; i <= 4; i++) { if (rate == parent_rate / i) { val &= ~(BUS_CLK_DIV_MASK << c->reg_shift); @@ -446,10 +474,14 @@ static int tegra2_bus_clk_set_rate(struct clk *c, unsigned long rate) clk_writel(val, c->reg); c->div = i; c->mul = 1; - return 0; + ret = 0; + break; } } - return -EINVAL; + + spin_unlock_irqrestore(&clock_register_lock, flags); + + return ret; } static struct clk_ops tegra_bus_ops = { @@ -511,14 +543,15 @@ static void tegra2_blink_clk_disable(struct clk *c) static int tegra2_blink_clk_set_rate(struct clk *c, unsigned long rate) { - if (rate >= c->parent->rate) { + unsigned long parent_rate = clk_get_rate(c->parent); + if (rate >= parent_rate) { c->div = 1; pmc_writel(0, c->reg); } else { unsigned int on_off; u32 val; - on_off = DIV_ROUND_UP(c->parent->rate / 8, rate); + on_off = DIV_ROUND_UP(parent_rate / 8, rate); c->div = on_off * 8; val = (on_off & PMC_BLINK_TIMER_DATA_ON_MASK) << @@ -604,7 +637,7 @@ static int tegra2_pll_clk_set_rate(struct clk *c, unsigned long rate) pr_debug("%s: %s %lu\n", __func__, c->name, rate); - input_rate = c->parent->rate; + input_rate = clk_get_rate(c->parent); for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) { if (sel->input_rate == input_rate && sel->output_rate == rate) { c->mul = sel->n; @@ -717,9 +750,11 @@ static int tegra2_pll_div_clk_enable(struct clk *c) { u32 val; u32 new_val; + unsigned long flags; pr_debug("%s: %s\n", __func__, c->name); if (c->flags & DIV_U71) { + spin_lock_irqsave(&clock_register_lock, flags); val = clk_readl(c->reg); new_val = val >> c->reg_shift; new_val &= 0xFFFF; @@ -729,12 +764,15 @@ static int tegra2_pll_div_clk_enable(struct clk *c) val &= ~(0xFFFF << c->reg_shift); val |= new_val << c->reg_shift; clk_writel(val, c->reg); + spin_unlock_irqrestore(&clock_register_lock, flags); return 0; } else if (c->flags & DIV_2) { BUG_ON(!(c->flags & PLLD)); + spin_lock_irqsave(&clock_register_lock, flags); val = clk_readl(c->reg); val &= ~PLLD_MISC_DIV_RST; clk_writel(val, c->reg); + spin_unlock_irqrestore(&clock_register_lock, flags); return 0; } return -EINVAL; @@ -744,9 +782,11 @@ static void tegra2_pll_div_clk_disable(struct clk *c) { u32 val; u32 new_val; + unsigned long flags; pr_debug("%s: %s\n", __func__, c->name); if (c->flags & DIV_U71) { + spin_lock_irqsave(&clock_register_lock, flags); val = clk_readl(c->reg); new_val = val >> c->reg_shift; new_val &= 0xFFFF; @@ -756,11 +796,14 @@ static void tegra2_pll_div_clk_disable(struct clk *c) val &= ~(0xFFFF << c->reg_shift); val |= new_val << c->reg_shift; clk_writel(val, c->reg); + spin_unlock_irqrestore(&clock_register_lock, flags); } else if (c->flags & DIV_2) { BUG_ON(!(c->flags & PLLD)); + spin_lock_irqsave(&clock_register_lock, flags); val = clk_readl(c->reg); val |= PLLD_MISC_DIV_RST; clk_writel(val, c->reg); + spin_unlock_irqrestore(&clock_register_lock, flags); } } @@ -769,10 +812,14 @@ static int tegra2_pll_div_clk_set_rate(struct clk *c, unsigned long rate) u32 val; u32 new_val; int divider_u71; + unsigned long parent_rate = clk_get_rate(c->parent); + unsigned long flags; + pr_debug("%s: %s %lu\n", __func__, c->name, rate); if (c->flags & DIV_U71) { - divider_u71 = clk_div71_get_divider(c->parent->rate, rate); + divider_u71 = clk_div71_get_divider(parent_rate, rate); if (divider_u71 >= 0) { + spin_lock_irqsave(&clock_register_lock, flags); val = clk_readl(c->reg); new_val = val >> c->reg_shift; new_val &= 0xFFFF; @@ -786,10 +833,11 @@ static int tegra2_pll_div_clk_set_rate(struct clk *c, unsigned long rate) clk_writel(val, c->reg); c->div = divider_u71 + 2; c->mul = 2; + spin_unlock_irqrestore(&clock_register_lock, flags); return 0; } } else if (c->flags & DIV_2) { - if (c->parent->rate == rate * 2) + if (parent_rate == rate * 2) return 0; } return -EINVAL; @@ -798,15 +846,16 @@ static int tegra2_pll_div_clk_set_rate(struct clk *c, unsigned long rate) static long tegra2_pll_div_clk_round_rate(struct clk *c, unsigned long rate) { int divider; + unsigned long parent_rate = clk_get_rate(c->parent); pr_debug("%s: %s %lu\n", __func__, c->name, rate); if (c->flags & DIV_U71) { - divider = clk_div71_get_divider(c->parent->rate, rate); + divider = clk_div71_get_divider(parent_rate, rate); if (divider < 0) return divider; - return c->parent->rate * 2 / (divider + 2); + return parent_rate * 2 / (divider + 2); } else if (c->flags & DIV_2) { - return c->parent->rate / 2; + return parent_rate / 2; } return -EINVAL; } @@ -912,12 +961,12 @@ static int tegra2_periph_clk_set_parent(struct clk *c, struct clk *p) val |= (sel->value) << PERIPH_CLK_SOURCE_SHIFT; if (c->refcnt) - clk_enable_locked(p); + clk_enable(p); clk_writel(val, c->reg); if (c->refcnt && c->parent) - clk_disable_locked(c->parent); + clk_disable(c->parent); clk_reparent(c, p); return 0; @@ -931,9 +980,10 @@ static int tegra2_periph_clk_set_rate(struct clk *c, unsigned long rate) { u32 val; int divider; - pr_debug("%s: %lu\n", __func__, rate); + unsigned long parent_rate = clk_get_rate(c->parent); + if (c->flags & DIV_U71) { - divider = clk_div71_get_divider(c->parent->rate, rate); + divider = clk_div71_get_divider(parent_rate, rate); if (divider >= 0) { val = clk_readl(c->reg); val &= ~PERIPH_CLK_SOURCE_DIVU71_MASK; @@ -944,7 +994,7 @@ static int tegra2_periph_clk_set_rate(struct clk *c, unsigned long rate) return 0; } } else if (c->flags & DIV_U16) { - divider = clk_div16_get_divider(c->parent->rate, rate); + divider = clk_div16_get_divider(parent_rate, rate); if (divider >= 0) { val = clk_readl(c->reg); val &= ~PERIPH_CLK_SOURCE_DIVU16_MASK; @@ -954,7 +1004,7 @@ static int tegra2_periph_clk_set_rate(struct clk *c, unsigned long rate) c->mul = 1; return 0; } - } else if (c->parent->rate <= rate) { + } else if (parent_rate <= rate) { c->div = 1; c->mul = 1; return 0; @@ -966,19 +1016,20 @@ static long tegra2_periph_clk_round_rate(struct clk *c, unsigned long rate) { int divider; + unsigned long parent_rate = clk_get_rate(c->parent); pr_debug("%s: %s %lu\n", __func__, c->name, rate); if (c->flags & DIV_U71) { - divider = clk_div71_get_divider(c->parent->rate, rate); + divider = clk_div71_get_divider(parent_rate, rate); if (divider < 0) return divider; - return c->parent->rate * 2 / (divider + 2); + return parent_rate * 2 / (divider + 2); } else if (c->flags & DIV_U16) { - divider = clk_div16_get_divider(c->parent->rate, rate); + divider = clk_div16_get_divider(parent_rate, rate); if (divider < 0) return divider; - return c->parent->rate / (divider + 1); + return parent_rate / (divider + 1); } return -EINVAL; } @@ -1006,7 +1057,7 @@ static void tegra2_clk_double_init(struct clk *c) static int tegra2_clk_double_set_rate(struct clk *c, unsigned long rate) { - if (rate != 2 * c->parent->rate) + if (rate != 2 * clk_get_rate(c->parent)) return -EINVAL; c->mul = 2; c->div = 1; @@ -1057,12 +1108,12 @@ static int tegra2_audio_sync_clk_set_parent(struct clk *c, struct clk *p) val |= sel->value; if (c->refcnt) - clk_enable_locked(p); + clk_enable(p); clk_writel(val, c->reg); if (c->refcnt && c->parent) - clk_disable_locked(c->parent); + clk_disable(c->parent); clk_reparent(c, p); return 0; -- cgit v1.2.3-18-g5258 From 89a5fb84dabdf6daeae7d5301a6b1ae4754425dd Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Wed, 20 Oct 2010 17:47:59 -0700 Subject: ARM: tegra: cpufreq: Take an extra reference to pllx During cpu frequency changes, take an extra reference to pllx so that it doesn't turn off and on while the cpu is temporarily on pllp. If the cpu is moved to pllp permanently, pllx will be turned off. Acked-by: Olof Johansson Signed-off-by: Colin Cross --- arch/arm/mach-tegra/cpu-tegra.c | 2 ++ arch/arm/mach-tegra/tegra2_clocks.c | 15 +++++++++++---- 2 files changed, 13 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/cpu-tegra.c b/arch/arm/mach-tegra/cpu-tegra.c index cda03f11550..f02ba603ceb 100644 --- a/arch/arm/mach-tegra/cpu-tegra.c +++ b/arch/arm/mach-tegra/cpu-tegra.c @@ -173,6 +173,8 @@ static int tegra_cpu_init(struct cpufreq_policy *policy) if (IS_ERR(cpu_clk)) return PTR_ERR(cpu_clk); + clk_enable(cpu_clk); + cpufreq_frequency_table_cpuinfo(policy, freq_table); cpufreq_frequency_table_get_attr(freq_table, policy->cpu); policy->cur = tegra_getspeed(policy->cpu); diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c index ea07f513e90..94793dd97ae 100644 --- a/arch/arm/mach-tegra/tegra2_clocks.c +++ b/arch/arm/mach-tegra/tegra2_clocks.c @@ -385,10 +385,16 @@ static void tegra2_cpu_clk_disable(struct clk *c) static int tegra2_cpu_clk_set_rate(struct clk *c, unsigned long rate) { int ret; + /* + * Take an extra reference to the main pll so it doesn't turn + * off when we move the cpu off of it + */ + clk_enable(c->u.cpu.main); + ret = clk_set_parent(c->parent, c->u.cpu.backup); if (ret) { pr_err("Failed to switch cpu to clock %s\n", c->u.cpu.backup->name); - return ret; + goto out; } if (rate == clk_get_rate(c->u.cpu.backup)) @@ -397,17 +403,18 @@ static int tegra2_cpu_clk_set_rate(struct clk *c, unsigned long rate) ret = clk_set_rate(c->u.cpu.main, rate); if (ret) { pr_err("Failed to change cpu pll to %lu\n", rate); - return ret; + goto out; } ret = clk_set_parent(c->parent, c->u.cpu.main); if (ret) { pr_err("Failed to switch cpu to clock %s\n", c->u.cpu.main->name); - return ret; + goto out; } out: - return 0; + clk_disable(c->u.cpu.main); + return ret; } static struct clk_ops tegra_cpu_ops = { -- cgit v1.2.3-18-g5258 From 310992ca4b994db8c869e1c0f32c004b7a196147 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Sat, 12 Feb 2011 16:14:03 -0800 Subject: ARM: tegra: clock: Add shared bus clock type Some clocks may have multiple downstream users that need to request a higher clock rate. Shared bus clocks provide a unique shared_bus_user clock to each user. The frequency of the bus is set to the highest enabled shared_bus_user clock, with a minimum value set by the shared bus. Drivers can use clk_enable and clk_disable to enable or disable their requirement, and clk_set_rate to set the minimum rate. Acked-by: Olof Johansson Signed-off-by: Colin Cross --- arch/arm/mach-tegra/clock.h | 8 +++ arch/arm/mach-tegra/tegra2_clocks.c | 116 ++++++++++++++++++++++++++++++++++++ 2 files changed, 124 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-tegra/clock.h b/arch/arm/mach-tegra/clock.h index a63dbf93d9b..bb755c28a50 100644 --- a/arch/arm/mach-tegra/clock.h +++ b/arch/arm/mach-tegra/clock.h @@ -85,6 +85,7 @@ struct clk { struct clk_ops *ops; unsigned long rate; unsigned long max_rate; + unsigned long min_rate; u32 flags; const char *name; @@ -98,6 +99,8 @@ struct clk { u32 reg; u32 reg_shift; + struct list_head shared_bus_list; + union { struct { unsigned int clk_num; @@ -120,6 +123,11 @@ struct clk { struct clk *main; struct clk *backup; } cpu; + struct { + struct list_head node; + bool enabled; + unsigned long rate; + } shared_bus_user; } u; spinlock_t spinlock; diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c index 94793dd97ae..1e414ba6df4 100644 --- a/arch/arm/mach-tegra/tegra2_clocks.c +++ b/arch/arm/mach-tegra/tegra2_clocks.c @@ -1188,6 +1188,110 @@ static struct clk_ops tegra_cdev_clk_ops = { .disable = &tegra2_cdev_clk_disable, }; +/* shared bus ops */ +/* + * Some clocks may have multiple downstream users that need to request a + * higher clock rate. Shared bus clocks provide a unique shared_bus_user + * clock to each user. The frequency of the bus is set to the highest + * enabled shared_bus_user clock, with a minimum value set by the + * shared bus. + */ +static int tegra_clk_shared_bus_update(struct clk *bus) +{ + struct clk *c; + unsigned long rate = bus->min_rate; + + list_for_each_entry(c, &bus->shared_bus_list, u.shared_bus_user.node) + if (c->u.shared_bus_user.enabled) + rate = max(c->u.shared_bus_user.rate, rate); + + if (rate == clk_get_rate_locked(bus)) + return 0; + + return clk_set_rate_locked(bus, rate); +}; + +static void tegra_clk_shared_bus_init(struct clk *c) +{ + unsigned long flags; + + c->max_rate = c->parent->max_rate; + c->u.shared_bus_user.rate = c->parent->max_rate; + c->state = OFF; +#ifdef CONFIG_DEBUG_FS + c->set = true; +#endif + + spin_lock_irqsave(&c->parent->spinlock, flags); + + list_add_tail(&c->u.shared_bus_user.node, + &c->parent->shared_bus_list); + + spin_unlock_irqrestore(&c->parent->spinlock, flags); +} + +static int tegra_clk_shared_bus_set_rate(struct clk *c, unsigned long rate) +{ + unsigned long flags; + int ret; + + rate = clk_round_rate(c->parent, rate); + if (rate < 0) + return rate; + + spin_lock_irqsave(&c->parent->spinlock, flags); + + c->u.shared_bus_user.rate = rate; + ret = tegra_clk_shared_bus_update(c->parent); + + spin_unlock_irqrestore(&c->parent->spinlock, flags); + + return ret; +} + +static long tegra_clk_shared_bus_round_rate(struct clk *c, unsigned long rate) +{ + return clk_round_rate(c->parent, rate); +} + +static int tegra_clk_shared_bus_enable(struct clk *c) +{ + unsigned long flags; + int ret; + + spin_lock_irqsave(&c->parent->spinlock, flags); + + c->u.shared_bus_user.enabled = true; + ret = tegra_clk_shared_bus_update(c->parent); + + spin_unlock_irqrestore(&c->parent->spinlock, flags); + + return ret; +} + +static void tegra_clk_shared_bus_disable(struct clk *c) +{ + unsigned long flags; + int ret; + + spin_lock_irqsave(&c->parent->spinlock, flags); + + c->u.shared_bus_user.enabled = false; + ret = tegra_clk_shared_bus_update(c->parent); + WARN_ON_ONCE(ret); + + spin_unlock_irqrestore(&c->parent->spinlock, flags); +} + +static struct clk_ops tegra_clk_shared_bus_ops = { + .init = tegra_clk_shared_bus_init, + .enable = tegra_clk_shared_bus_enable, + .disable = tegra_clk_shared_bus_disable, + .set_rate = tegra_clk_shared_bus_set_rate, + .round_rate = tegra_clk_shared_bus_round_rate, +}; + + /* Clock definitions */ static struct clk tegra_clk_32k = { .name = "clk_32k", @@ -1863,6 +1967,17 @@ static struct clk_mux_sel mux_pclk[] = { }, \ } +#define SHARED_CLK(_name, _dev, _con, _parent) \ + { \ + .name = _name, \ + .lookup = { \ + .dev_id = _dev, \ + .con_id = _con, \ + }, \ + .ops = &tegra_clk_shared_bus_ops, \ + .parent = _parent, \ + } + struct clk tegra_list_clks[] = { PERIPH_CLK("apbdma", "tegra-dma", NULL, 34, 0, 108000000, mux_pclk, 0), PERIPH_CLK("rtc", "rtc-tegra", NULL, 4, 0, 32768, mux_clk_32k, PERIPH_NO_RESET), @@ -2007,6 +2122,7 @@ struct clk *tegra_ptr_clks[] = { static void tegra2_init_one_clock(struct clk *c) { clk_init(c); + INIT_LIST_HEAD(&c->shared_bus_list); if (!c->lookup.dev_id && !c->lookup.con_id) c->lookup.con_id = c->name; c->lookup.clk = c; -- cgit v1.2.3-18-g5258 From 4db4afb4df93425708ca19417921bcc6a6306476 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Sun, 20 Feb 2011 23:35:07 -0800 Subject: ARM: tegra: clock: Minor cleanups Remove unnecessary uses of #ifdef CONFIG_DEBUG_FS Convert bool assignments from 1 to true Acked-by: Olof Johansson Signed-off-by: Colin Cross --- arch/arm/mach-tegra/clock.c | 6 ++---- arch/arm/mach-tegra/clock.h | 2 +- arch/arm/mach-tegra/tegra2_clocks.c | 2 -- 3 files changed, 3 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c index aff4c5b8c37..f1f9c6d36bd 100644 --- a/arch/arm/mach-tegra/clock.c +++ b/arch/arm/mach-tegra/clock.c @@ -135,7 +135,7 @@ void clk_init(struct clk *c) if (!c->ops || !c->ops->enable) { c->refcnt++; - c->set = 1; + c->set = true; if (c->parent) c->state = c->parent->state; else @@ -169,9 +169,7 @@ int clk_enable(struct clk *c) goto out; } c->state = ON; -#ifdef CONFIG_DEBUG_FS - c->set = 1; -#endif + c->set = true; } } c->refcnt++; diff --git a/arch/arm/mach-tegra/clock.h b/arch/arm/mach-tegra/clock.h index bb755c28a50..ebe6ea8b057 100644 --- a/arch/arm/mach-tegra/clock.h +++ b/arch/arm/mach-tegra/clock.h @@ -80,8 +80,8 @@ struct clk { #ifdef CONFIG_DEBUG_FS struct dentry *dent; - bool set; #endif + bool set; struct clk_ops *ops; unsigned long rate; unsigned long max_rate; diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c index 1e414ba6df4..f6f685c4f33 100644 --- a/arch/arm/mach-tegra/tegra2_clocks.c +++ b/arch/arm/mach-tegra/tegra2_clocks.c @@ -1218,9 +1218,7 @@ static void tegra_clk_shared_bus_init(struct clk *c) c->max_rate = c->parent->max_rate; c->u.shared_bus_user.rate = c->parent->max_rate; c->state = OFF; -#ifdef CONFIG_DEBUG_FS c->set = true; -#endif spin_lock_irqsave(&c->parent->spinlock, flags); -- cgit v1.2.3-18-g5258 From efdf72ad5c42b529286a1991f51badb030043719 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Sat, 12 Feb 2011 18:22:49 -0800 Subject: ARM: tegra: Add external memory controller driver The frequency memory bus on Tegra can be adjusted without disabling accesses to memory by updating the memory configuration registers from a per-board table, and then changing the clock frequency. The clock controller and memory controller have an interlock that prevents the new memory registers from taking effect until the clock frequency change. Acked-by: Olof Johansson Signed-off-by: Colin Cross --- arch/arm/mach-tegra/Kconfig | 3 + arch/arm/mach-tegra/Makefile | 1 + arch/arm/mach-tegra/tegra2_emc.c | 178 +++++++++++++++++++++++++++++++++++++++ arch/arm/mach-tegra/tegra2_emc.h | 27 ++++++ 4 files changed, 209 insertions(+) create mode 100644 arch/arm/mach-tegra/tegra2_emc.c create mode 100644 arch/arm/mach-tegra/tegra2_emc.h (limited to 'arch') diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index f0fda77395e..cac8a79e738 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -65,3 +65,6 @@ config TEGRA_SYSTEM_DMA several Tegra device drivers endif + +config TEGRA_EMC_SCALING_ENABLE + bool "Enable scaling the memory frequency" diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index 23de0600a19..3fe357bc763 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -9,6 +9,7 @@ obj-y += powergate.o obj-y += fuse.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += clock.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_clocks.o +obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_emc.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += pinmux-t2-tables.o obj-$(CONFIG_SMP) += platsmp.o localtimer.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-tegra/tegra2_emc.c b/arch/arm/mach-tegra/tegra2_emc.c new file mode 100644 index 00000000000..0f7ae6e90b5 --- /dev/null +++ b/arch/arm/mach-tegra/tegra2_emc.c @@ -0,0 +1,178 @@ +/* + * Copyright (C) 2011 Google, Inc. + * + * Author: + * Colin Cross + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include + +#include + +#include "tegra2_emc.h" + +#ifdef CONFIG_TEGRA_EMC_SCALING_ENABLE +static bool emc_enable = true; +#else +static bool emc_enable; +#endif +module_param(emc_enable, bool, 0644); + +static void __iomem *emc = IO_ADDRESS(TEGRA_EMC_BASE); +static const struct tegra_emc_table *tegra_emc_table; +static int tegra_emc_table_size; + +static inline void emc_writel(u32 val, unsigned long addr) +{ + writel(val, emc + addr); +} + +static inline u32 emc_readl(unsigned long addr) +{ + return readl(emc + addr); +} + +static const unsigned long emc_reg_addr[TEGRA_EMC_NUM_REGS] = { + 0x2c, /* RC */ + 0x30, /* RFC */ + 0x34, /* RAS */ + 0x38, /* RP */ + 0x3c, /* R2W */ + 0x40, /* W2R */ + 0x44, /* R2P */ + 0x48, /* W2P */ + 0x4c, /* RD_RCD */ + 0x50, /* WR_RCD */ + 0x54, /* RRD */ + 0x58, /* REXT */ + 0x5c, /* WDV */ + 0x60, /* QUSE */ + 0x64, /* QRST */ + 0x68, /* QSAFE */ + 0x6c, /* RDV */ + 0x70, /* REFRESH */ + 0x74, /* BURST_REFRESH_NUM */ + 0x78, /* PDEX2WR */ + 0x7c, /* PDEX2RD */ + 0x80, /* PCHG2PDEN */ + 0x84, /* ACT2PDEN */ + 0x88, /* AR2PDEN */ + 0x8c, /* RW2PDEN */ + 0x90, /* TXSR */ + 0x94, /* TCKE */ + 0x98, /* TFAW */ + 0x9c, /* TRPAB */ + 0xa0, /* TCLKSTABLE */ + 0xa4, /* TCLKSTOP */ + 0xa8, /* TREFBW */ + 0xac, /* QUSE_EXTRA */ + 0x114, /* FBIO_CFG6 */ + 0xb0, /* ODT_WRITE */ + 0xb4, /* ODT_READ */ + 0x104, /* FBIO_CFG5 */ + 0x2bc, /* CFG_DIG_DLL */ + 0x2c0, /* DLL_XFORM_DQS */ + 0x2c4, /* DLL_XFORM_QUSE */ + 0x2e0, /* ZCAL_REF_CNT */ + 0x2e4, /* ZCAL_WAIT_CNT */ + 0x2a8, /* AUTO_CAL_INTERVAL */ + 0x2d0, /* CFG_CLKTRIM_0 */ + 0x2d4, /* CFG_CLKTRIM_1 */ + 0x2d8, /* CFG_CLKTRIM_2 */ +}; + +/* Select the closest EMC rate that is higher than the requested rate */ +long tegra_emc_round_rate(unsigned long rate) +{ + int i; + int best = -1; + unsigned long distance = ULONG_MAX; + + if (!tegra_emc_table) + return -EINVAL; + + if (!emc_enable) + return -EINVAL; + + pr_debug("%s: %lu\n", __func__, rate); + + /* + * The EMC clock rate is twice the bus rate, and the bus rate is + * measured in kHz + */ + rate = rate / 2 / 1000; + + for (i = 0; i < tegra_emc_table_size; i++) { + if (tegra_emc_table[i].rate >= rate && + (tegra_emc_table[i].rate - rate) < distance) { + distance = tegra_emc_table[i].rate - rate; + best = i; + } + } + + if (best < 0) + return -EINVAL; + + pr_debug("%s: using %lu\n", __func__, tegra_emc_table[best].rate); + + return tegra_emc_table[best].rate * 2 * 1000; +} + +/* + * The EMC registers have shadow registers. When the EMC clock is updated + * in the clock controller, the shadow registers are copied to the active + * registers, allowing glitchless memory bus frequency changes. + * This function updates the shadow registers for a new clock frequency, + * and relies on the clock lock on the emc clock to avoid races between + * multiple frequency changes + */ +int tegra_emc_set_rate(unsigned long rate) +{ + int i; + int j; + + if (!tegra_emc_table) + return -EINVAL; + + /* + * The EMC clock rate is twice the bus rate, and the bus rate is + * measured in kHz + */ + rate = rate / 2 / 1000; + + for (i = 0; i < tegra_emc_table_size; i++) + if (tegra_emc_table[i].rate == rate) + break; + + if (i >= tegra_emc_table_size) + return -EINVAL; + + pr_debug("%s: setting to %lu\n", __func__, rate); + + for (j = 0; j < TEGRA_EMC_NUM_REGS; j++) + emc_writel(tegra_emc_table[i].regs[j], emc_reg_addr[j]); + + emc_readl(tegra_emc_table[i].regs[TEGRA_EMC_NUM_REGS - 1]); + + return 0; +} + +void tegra_init_emc(const struct tegra_emc_table *table, int table_size) +{ + tegra_emc_table = table; + tegra_emc_table_size = table_size; +} diff --git a/arch/arm/mach-tegra/tegra2_emc.h b/arch/arm/mach-tegra/tegra2_emc.h new file mode 100644 index 00000000000..19f08cb3160 --- /dev/null +++ b/arch/arm/mach-tegra/tegra2_emc.h @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2011 Google, Inc. + * + * Author: + * Colin Cross + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#define TEGRA_EMC_NUM_REGS 46 + +struct tegra_emc_table { + unsigned long rate; + u32 regs[TEGRA_EMC_NUM_REGS]; +}; + +int tegra_emc_set_rate(unsigned long rate); +long tegra_emc_round_rate(unsigned long rate); +void tegra_init_emc(const struct tegra_emc_table *table, int table_size); -- cgit v1.2.3-18-g5258 From 6d2968284f63efa1d1849165f9e3a80402509212 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Mon, 22 Nov 2010 18:37:54 -0800 Subject: ARM: tegra: clocks: Add emc scaling Add clock ops on the emc peripheral clock that call into the emc driver to update the memory controller registers for the new frequency. Tegra has an interlock between the clock controller and the memory controller that prevents the new register values from taking effect until the clock frequency update occurs. Acked-by: Olof Johansson Signed-off-by: Colin Cross --- arch/arm/mach-tegra/tegra2_clocks.c | 64 ++++++++++++++++++++++++++++++++++++- 1 file changed, 63 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c index f6f685c4f33..7f706871404 100644 --- a/arch/arm/mach-tegra/tegra2_clocks.c +++ b/arch/arm/mach-tegra/tegra2_clocks.c @@ -31,6 +31,7 @@ #include "clock.h" #include "fuse.h" +#include "tegra2_emc.h" #define RST_DEVICES 0x004 #define RST_DEVICES_SET 0x300 @@ -1051,6 +1052,55 @@ static struct clk_ops tegra_periph_clk_ops = { .reset = &tegra2_periph_clk_reset, }; +/* External memory controller clock ops */ +static void tegra2_emc_clk_init(struct clk *c) +{ + tegra2_periph_clk_init(c); + c->max_rate = clk_get_rate_locked(c); +} + +static long tegra2_emc_clk_round_rate(struct clk *c, unsigned long rate) +{ + long new_rate = rate; + + new_rate = tegra_emc_round_rate(new_rate); + if (new_rate < 0) + return c->max_rate; + + BUG_ON(new_rate != tegra2_periph_clk_round_rate(c, new_rate)); + + return new_rate; +} + +static int tegra2_emc_clk_set_rate(struct clk *c, unsigned long rate) +{ + int ret; + /* + * The Tegra2 memory controller has an interlock with the clock + * block that allows memory shadowed registers to be updated, + * and then transfer them to the main registers at the same + * time as the clock update without glitches. + */ + ret = tegra_emc_set_rate(rate); + if (ret < 0) + return ret; + + ret = tegra2_periph_clk_set_rate(c, rate); + udelay(1); + + return ret; +} + +static struct clk_ops tegra_emc_clk_ops = { + .init = &tegra2_emc_clk_init, + .enable = &tegra2_periph_clk_enable, + .disable = &tegra2_periph_clk_disable, + .set_parent = &tegra2_periph_clk_set_parent, + .set_rate = &tegra2_emc_clk_set_rate, + .round_rate = &tegra2_emc_clk_round_rate, + .reset = &tegra2_periph_clk_reset, +}; + /* Clock doubler ops */ static void tegra2_clk_double_init(struct clk *c) { @@ -1948,6 +1998,18 @@ static struct clk_mux_sel mux_pclk[] = { { 0, 0}, }; +static struct clk tegra_clk_emc = { + .name = "emc", + .ops = &tegra_emc_clk_ops, + .reg = 0x19c, + .max_rate = 800000000, + .inputs = mux_pllm_pllc_pllp_clkm, + .flags = MUX | DIV_U71 | PERIPH_EMC_ENB, + .u.periph = { + .clk_num = 57, + }, +}; + #define PERIPH_CLK(_name, _dev, _con, _clk_num, _reg, _max, _inputs, _flags) \ { \ .name = _name, \ @@ -2039,7 +2101,6 @@ struct clk tegra_list_clks[] = { PERIPH_CLK("usbd", "fsl-tegra-udc", NULL, 22, 0, 480000000, mux_clk_m, 0), /* requires min voltage */ PERIPH_CLK("usb2", "tegra-ehci.1", NULL, 58, 0, 480000000, mux_clk_m, 0), /* requires min voltage */ PERIPH_CLK("usb3", "tegra-ehci.2", NULL, 59, 0, 480000000, mux_clk_m, 0), /* requires min voltage */ - PERIPH_CLK("emc", "emc", NULL, 57, 0x19c, 800000000, mux_pllm_pllc_pllp_clkm, MUX | DIV_U71 | PERIPH_EMC_ENB), PERIPH_CLK("dsi", "dsi", NULL, 48, 0, 500000000, mux_plld, 0), /* scales with voltage */ PERIPH_CLK("csi", "tegra_camera", "csi", 52, 0, 72000000, mux_pllp_out3, 0), PERIPH_CLK("isp", "tegra_camera", "isp", 23, 0, 150000000, mux_clk_m, 0), /* same frequency as VI */ @@ -2115,6 +2176,7 @@ struct clk *tegra_ptr_clks[] = { &tegra_dev2_clk, &tegra_clk_virtual_cpu, &tegra_clk_blink, + &tegra_clk_emc, }; static void tegra2_init_one_clock(struct clk *c) -- cgit v1.2.3-18-g5258 From 7a281284125fe8704ea16fd1ca243971b7c0a105 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Mon, 22 Nov 2010 18:54:36 -0800 Subject: ARM: tegra: cpufreq: Adjust memory frequency with cpu frequency Adjusts the minimum memory frequency when the cpu frequency changes. The values are currently hardcoded to a reasonable default. If memory frequency scaling is not enabled this patch will have no effect. Acked-by: Olof Johansson Signed-off-by: Colin Cross --- arch/arm/mach-tegra/cpu-tegra.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-tegra/cpu-tegra.c b/arch/arm/mach-tegra/cpu-tegra.c index f02ba603ceb..0e1016a827a 100644 --- a/arch/arm/mach-tegra/cpu-tegra.c +++ b/arch/arm/mach-tegra/cpu-tegra.c @@ -51,6 +51,7 @@ static struct cpufreq_frequency_table freq_table[] = { #define NUM_CPUS 2 static struct clk *cpu_clk; +static struct clk *emc_clk; static unsigned long target_cpu_speed[NUM_CPUS]; static DEFINE_MUTEX(tegra_cpu_lock); @@ -83,6 +84,17 @@ static int tegra_update_cpu_speed(unsigned long rate) if (freqs.old == freqs.new) return ret; + /* + * Vote on memory bus frequency based on cpu frequency + * This sets the minimum frequency, display or avp may request higher + */ + if (rate >= 816000) + clk_set_rate(emc_clk, 600000000); /* cpu 816 MHz, emc max */ + else if (rate >= 456000) + clk_set_rate(emc_clk, 300000000); /* cpu 456 MHz, emc 150Mhz */ + else + clk_set_rate(emc_clk, 100000000); /* emc 50Mhz */ + for_each_online_cpu(freqs.cpu) cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); @@ -173,6 +185,13 @@ static int tegra_cpu_init(struct cpufreq_policy *policy) if (IS_ERR(cpu_clk)) return PTR_ERR(cpu_clk); + emc_clk = clk_get_sys("cpu", "emc"); + if (IS_ERR(emc_clk)) { + clk_put(cpu_clk); + return PTR_ERR(emc_clk); + } + + clk_enable(emc_clk); clk_enable(cpu_clk); cpufreq_frequency_table_cpuinfo(policy, freq_table); @@ -195,6 +214,8 @@ static int tegra_cpu_init(struct cpufreq_policy *policy) static int tegra_cpu_exit(struct cpufreq_policy *policy) { cpufreq_frequency_table_cpuinfo(policy, freq_table); + clk_disable(emc_clk); + clk_put(emc_clk); clk_put(cpu_clk); return 0; } -- cgit v1.2.3-18-g5258 From 9743b38969790d33b077ab80b175ea63a0398703 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Sat, 12 Feb 2011 18:24:32 -0800 Subject: ARM: tegra: clock: Add function to set SDMMC tap delay The SDMMC controllers have extra bits in the clock source register that adjust the delay between the clock and data to compenstate for delays on the PCB. The values need to be set from the clock code so the clock can be locked during the read-modify-write on the clock source register. Acked-by: Olof Johansson Signed-off-by: Colin Cross --- arch/arm/mach-tegra/clock.c | 14 ++++++++++++++ arch/arm/mach-tegra/clock.h | 1 + arch/arm/mach-tegra/include/mach/clk.h | 2 ++ arch/arm/mach-tegra/tegra2_clocks.c | 19 +++++++++++++++++++ 4 files changed, 36 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c index f1f9c6d36bd..165aa9c748f 100644 --- a/arch/arm/mach-tegra/clock.c +++ b/arch/arm/mach-tegra/clock.c @@ -390,6 +390,20 @@ void __init tegra_init_clock(void) tegra2_init_clocks(); } +/* + * The SDMMC controllers have extra bits in the clock source register that + * adjust the delay between the clock and data to compenstate for delays + * on the PCB. + */ +void tegra_sdmmc_tap_delay(struct clk *c, int delay) +{ + unsigned long flags; + + spin_lock_irqsave(&c->spinlock, flags); + tegra2_sdmmc_tap_delay(c, delay); + spin_unlock_irqrestore(&c->spinlock, flags); +} + #ifdef CONFIG_DEBUG_FS static int __clk_lock_all_spinlocks(void) diff --git a/arch/arm/mach-tegra/clock.h b/arch/arm/mach-tegra/clock.h index ebe6ea8b057..688316abc64 100644 --- a/arch/arm/mach-tegra/clock.h +++ b/arch/arm/mach-tegra/clock.h @@ -155,5 +155,6 @@ int clk_reparent(struct clk *c, struct clk *parent); void tegra_clk_init_from_table(struct tegra_clk_init_table *table); unsigned long clk_get_rate_locked(struct clk *c); int clk_set_rate_locked(struct clk *c, unsigned long rate); +void tegra2_sdmmc_tap_delay(struct clk *c, int delay); #endif diff --git a/arch/arm/mach-tegra/include/mach/clk.h b/arch/arm/mach-tegra/include/mach/clk.h index fa7f9ca1fdb..c8baf8f80d2 100644 --- a/arch/arm/mach-tegra/include/mach/clk.h +++ b/arch/arm/mach-tegra/include/mach/clk.h @@ -26,4 +26,6 @@ void tegra_periph_reset_deassert(struct clk *c); void tegra_periph_reset_assert(struct clk *c); unsigned long clk_get_rate_all_locked(struct clk *c); +void tegra_sdmmc_tap_delay(struct clk *c, int delay); + #endif diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c index 7f706871404..b85d2c75fb3 100644 --- a/arch/arm/mach-tegra/tegra2_clocks.c +++ b/arch/arm/mach-tegra/tegra2_clocks.c @@ -74,6 +74,10 @@ #define PERIPH_CLK_SOURCE_DIVU16_MASK 0xFFFF #define PERIPH_CLK_SOURCE_DIV_SHIFT 0 +#define SDMMC_CLK_INT_FB_SEL (1 << 23) +#define SDMMC_CLK_INT_FB_DLY_SHIFT 16 +#define SDMMC_CLK_INT_FB_DLY_MASK (0xF << SDMMC_CLK_INT_FB_DLY_SHIFT) + #define PLL_BASE 0x0 #define PLL_BASE_BYPASS (1<<31) #define PLL_BASE_ENABLE (1<<30) @@ -1052,6 +1056,21 @@ static struct clk_ops tegra_periph_clk_ops = { .reset = &tegra2_periph_clk_reset, }; +/* The SDMMC controllers have extra bits in the clock source register that + * adjust the delay between the clock and data to compenstate for delays + * on the PCB. */ +void tegra2_sdmmc_tap_delay(struct clk *c, int delay) +{ + u32 reg; + + delay = clamp(delay, 0, 15); + reg = clk_readl(c->reg); + reg &= ~SDMMC_CLK_INT_FB_DLY_MASK; + reg |= SDMMC_CLK_INT_FB_SEL; + reg |= delay << SDMMC_CLK_INT_FB_DLY_SHIFT; + clk_writel(reg, c->reg); +} + /* External memory controller clock ops */ static void tegra2_emc_clk_init(struct clk *c) { -- cgit v1.2.3-18-g5258 From c2f44a9df9e1f8974911ef538565e301b38e0680 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Tue, 26 Oct 2010 17:33:31 -0700 Subject: ARM: tegra: clock: Fix clock issues in suspend The PLLP registers are now being restored by the low-level resume code, and the CPU may be running off PLLP, so don't touch them during clock resume. Save plld, plls, pllu, and audio clock during suspend (originally fixed by Mayuresh Kulkarni ) The lock time for plld is 1000 us, so increase the delay after setting the PLLs. Add a BUG_ON to ensure the size of the suspend context area is correct. Acked-by: Olof Johansson Signed-off-by: Colin Cross --- arch/arm/mach-tegra/tegra2_clocks.c | 30 ++++++++++++++++++++---------- 1 file changed, 20 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c index b85d2c75fb3..260b77c4143 100644 --- a/arch/arm/mach-tegra/tegra2_clocks.c +++ b/arch/arm/mach-tegra/tegra2_clocks.c @@ -2236,7 +2236,7 @@ void __init tegra2_init_clocks(void) #ifdef CONFIG_PM static u32 clk_rst_suspend[RST_DEVICES_NUM + CLK_OUT_ENB_NUM + - PERIPH_CLK_SOURCE_NUM + 19]; + PERIPH_CLK_SOURCE_NUM + 22]; void tegra_clk_suspend(void) { @@ -2244,16 +2244,18 @@ void tegra_clk_suspend(void) u32 *ctx = clk_rst_suspend; *ctx++ = clk_readl(OSC_CTRL) & OSC_CTRL_MASK; - *ctx++ = clk_readl(tegra_pll_p.reg + PLL_BASE); - *ctx++ = clk_readl(tegra_pll_p.reg + PLL_MISC(&tegra_pll_p)); *ctx++ = clk_readl(tegra_pll_c.reg + PLL_BASE); *ctx++ = clk_readl(tegra_pll_c.reg + PLL_MISC(&tegra_pll_c)); *ctx++ = clk_readl(tegra_pll_a.reg + PLL_BASE); *ctx++ = clk_readl(tegra_pll_a.reg + PLL_MISC(&tegra_pll_a)); + *ctx++ = clk_readl(tegra_pll_s.reg + PLL_BASE); + *ctx++ = clk_readl(tegra_pll_s.reg + PLL_MISC(&tegra_pll_s)); + *ctx++ = clk_readl(tegra_pll_d.reg + PLL_BASE); + *ctx++ = clk_readl(tegra_pll_d.reg + PLL_MISC(&tegra_pll_d)); + *ctx++ = clk_readl(tegra_pll_u.reg + PLL_BASE); + *ctx++ = clk_readl(tegra_pll_u.reg + PLL_MISC(&tegra_pll_u)); *ctx++ = clk_readl(tegra_pll_m_out1.reg); - *ctx++ = clk_readl(tegra_pll_p_out1.reg); - *ctx++ = clk_readl(tegra_pll_p_out3.reg); *ctx++ = clk_readl(tegra_pll_a_out0.reg); *ctx++ = clk_readl(tegra_pll_c_out1.reg); @@ -2264,6 +2266,8 @@ void tegra_clk_suspend(void) *ctx++ = clk_readl(tegra_clk_sclk.reg + SUPER_CLK_DIVIDER); *ctx++ = clk_readl(tegra_clk_pclk.reg); + *ctx++ = clk_readl(tegra_clk_audio.reg); + for (off = PERIPH_CLK_SOURCE_I2S1; off <= PERIPH_CLK_SOURCE_OSC; off += 4) { if (off == PERIPH_CLK_SOURCE_EMC) @@ -2281,6 +2285,8 @@ void tegra_clk_suspend(void) *ctx++ = clk_readl(MISC_CLK_ENB); *ctx++ = clk_readl(CLK_MASK_ARM); + + BUG_ON(ctx - clk_rst_suspend != ARRAY_SIZE(clk_rst_suspend)); } void tegra_clk_resume(void) @@ -2293,17 +2299,19 @@ void tegra_clk_resume(void) val |= *ctx++; clk_writel(val, OSC_CTRL); - clk_writel(*ctx++, tegra_pll_p.reg + PLL_BASE); - clk_writel(*ctx++, tegra_pll_p.reg + PLL_MISC(&tegra_pll_p)); clk_writel(*ctx++, tegra_pll_c.reg + PLL_BASE); clk_writel(*ctx++, tegra_pll_c.reg + PLL_MISC(&tegra_pll_c)); clk_writel(*ctx++, tegra_pll_a.reg + PLL_BASE); clk_writel(*ctx++, tegra_pll_a.reg + PLL_MISC(&tegra_pll_a)); - udelay(300); + clk_writel(*ctx++, tegra_pll_s.reg + PLL_BASE); + clk_writel(*ctx++, tegra_pll_s.reg + PLL_MISC(&tegra_pll_s)); + clk_writel(*ctx++, tegra_pll_d.reg + PLL_BASE); + clk_writel(*ctx++, tegra_pll_d.reg + PLL_MISC(&tegra_pll_d)); + clk_writel(*ctx++, tegra_pll_u.reg + PLL_BASE); + clk_writel(*ctx++, tegra_pll_u.reg + PLL_MISC(&tegra_pll_u)); + udelay(1000); clk_writel(*ctx++, tegra_pll_m_out1.reg); - clk_writel(*ctx++, tegra_pll_p_out1.reg); - clk_writel(*ctx++, tegra_pll_p_out3.reg); clk_writel(*ctx++, tegra_pll_a_out0.reg); clk_writel(*ctx++, tegra_pll_c_out1.reg); @@ -2314,6 +2322,8 @@ void tegra_clk_resume(void) clk_writel(*ctx++, tegra_clk_sclk.reg + SUPER_CLK_DIVIDER); clk_writel(*ctx++, tegra_clk_pclk.reg); + clk_writel(*ctx++, tegra_clk_audio.reg); + /* enable all clocks before configuring clock sources */ clk_writel(0xbffffff9ul, CLK_OUT_ENB); clk_writel(0xfefffff7ul, CLK_OUT_ENB + 4); -- cgit v1.2.3-18-g5258 From 9c7dc562cd78784f54261b9bedb44e8b0056f729 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Sat, 12 Feb 2011 21:25:23 -0800 Subject: ARM: tegra: clock: Miscellaneous clock updates Correct max rates for pclk and sclk (Originally fixed by Dima Zavin ) Correct max rate for plla (Originally fixed by Stephen Warren ) Remove unnecessary no-op set_rate on audio clocks Add clock lookup entries for grhost, bsea, and vde clocks Update clock clookup entries for vcp, bsea, and vde clocks Add shared clock entries for sclk and emc Add a virtual cop clock to provide a reset op (Originally fixed by Dima Zavin ) Pass set_rate on super clocks through to parent Fix pllx frequency table entry for 608 MHz Remove incorrect plla frequency table entries Acked-by: Olof Johansson Signed-off-by: Colin Cross --- arch/arm/mach-tegra/tegra2_clocks.c | 98 +++++++++++++++++++++++++------------ 1 file changed, 67 insertions(+), 31 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c index 260b77c4143..59e77ba9580 100644 --- a/arch/arm/mach-tegra/tegra2_clocks.c +++ b/arch/arm/mach-tegra/tegra2_clocks.c @@ -356,11 +356,24 @@ static int tegra2_super_clk_set_parent(struct clk *c, struct clk *p) return -EINVAL; } +/* + * Super clocks have "clock skippers" instead of dividers. Dividing using + * a clock skipper does not allow the voltage to be scaled down, so instead + * adjust the rate of the parent clock. This requires that the parent of a + * super clock have no other children, otherwise the rate will change + * underneath the other children. + */ +static int tegra2_super_clk_set_rate(struct clk *c, unsigned long rate) +{ + return clk_set_rate(c->parent, rate); +} + static struct clk_ops tegra_super_ops = { .init = tegra2_super_clk_init, .enable = tegra2_super_clk_enable, .disable = tegra2_super_clk_disable, .set_parent = tegra2_super_clk_set_parent, + .set_rate = tegra2_super_clk_set_rate, }; /* virtual cpu clock functions */ @@ -429,6 +442,20 @@ static struct clk_ops tegra_cpu_ops = { .set_rate = tegra2_cpu_clk_set_rate, }; +/* virtual cop clock functions. Used to acquire the fake 'cop' clock to + * reset the COP block (i.e. AVP) */ +static void tegra2_cop_clk_reset(struct clk *c, bool assert) +{ + unsigned long reg = assert ? RST_DEVICES_SET : RST_DEVICES_CLR; + + pr_debug("%s %s\n", __func__, assert ? "assert" : "deassert"); + clk_writel(1 << 1, reg); +} + +static struct clk_ops tegra_cop_ops = { + .reset = tegra2_cop_clk_reset, +}; + /* bus clock functions */ static void tegra2_bus_clk_init(struct clk *c) { @@ -1199,30 +1226,10 @@ static int tegra2_audio_sync_clk_set_parent(struct clk *c, struct clk *p) return -EINVAL; } -static int tegra2_audio_sync_clk_set_rate(struct clk *c, unsigned long rate) -{ - unsigned long parent_rate; - if (!c->parent) { - pr_err("%s: clock has no parent\n", __func__); - return -EINVAL; - } - parent_rate = c->parent->rate; - if (rate != parent_rate) { - pr_err("%s: %s/%ld differs from parent %s/%ld\n", - __func__, - c->name, rate, - c->parent->name, parent_rate); - return -EINVAL; - } - c->rate = parent_rate; - return 0; -} - static struct clk_ops tegra_audio_sync_clk_ops = { .init = tegra2_audio_sync_clk_init, .enable = tegra2_audio_sync_clk_enable, .disable = tegra2_audio_sync_clk_disable, - .set_rate = tegra2_audio_sync_clk_set_rate, .set_parent = tegra2_audio_sync_clk_set_parent, }; @@ -1558,8 +1565,6 @@ static struct clk tegra_pll_p_out4 = { static struct clk_pll_freq_table tegra_pll_a_freq_table[] = { { 28800000, 56448000, 49, 25, 1, 1}, { 28800000, 73728000, 64, 25, 1, 1}, - { 28800000, 11289600, 49, 25, 1, 1}, - { 28800000, 12288000, 64, 25, 1, 1}, { 28800000, 24000000, 5, 6, 1, 1}, { 0, 0, 0, 0, 0, 0 }, }; @@ -1570,7 +1575,7 @@ static struct clk tegra_pll_a = { .ops = &tegra_pll_ops, .reg = 0xb0, .parent = &tegra_pll_p_out1, - .max_rate = 56448000, + .max_rate = 73728000, .u.pll = { .input_min = 2000000, .input_max = 31000000, @@ -1590,7 +1595,7 @@ static struct clk tegra_pll_a_out0 = { .parent = &tegra_pll_a, .reg = 0xb4, .reg_shift = 0, - .max_rate = 56448000, + .max_rate = 73728000, }; static struct clk_pll_freq_table tegra_pll_d_freq_table[] = { @@ -1692,10 +1697,10 @@ static struct clk_pll_freq_table tegra_pll_x_freq_table[] = { { 26000000, 760000000, 760, 26, 1, 12}, /* 608 MHz */ - { 12000000, 608000000, 760, 12, 1, 12}, - { 13000000, 608000000, 760, 13, 1, 12}, + { 12000000, 608000000, 608, 12, 1, 12}, + { 13000000, 608000000, 608, 13, 1, 12}, { 19200000, 608000000, 380, 12, 1, 8}, - { 26000000, 608000000, 760, 26, 1, 12}, + { 26000000, 608000000, 608, 26, 1, 12}, /* 456 MHz */ { 12000000, 456000000, 456, 12, 1, 12}, @@ -1808,7 +1813,7 @@ static struct clk tegra_clk_audio = { .name = "audio", .inputs = mux_audio_sync_clk, .reg = 0x38, - .max_rate = 24000000, + .max_rate = 73728000, .ops = &tegra_audio_sync_clk_ops }; @@ -1894,7 +1899,8 @@ static struct clk tegra_clk_sclk = { .inputs = mux_sclk, .reg = 0x28, .ops = &tegra_super_ops, - .max_rate = 600000000, + .max_rate = 240000000, + .min_rate = 120000000, }; static struct clk tegra_clk_virtual_cpu = { @@ -1908,6 +1914,13 @@ static struct clk tegra_clk_virtual_cpu = { }, }; +static struct clk tegra_clk_cop = { + .name = "cop", + .parent = &tegra_clk_sclk, + .ops = &tegra_cop_ops, + .max_rate = 240000000, +}; + static struct clk tegra_clk_hclk = { .name = "hclk", .flags = DIV_BUS, @@ -1925,7 +1938,7 @@ static struct clk tegra_clk_pclk = { .reg = 0x30, .reg_shift = 0, .ops = &tegra_bus_ops, - .max_rate = 108000000, + .max_rate = 120000000, }; static struct clk tegra_clk_blink = { @@ -2082,7 +2095,10 @@ struct clk tegra_list_clks[] = { PERIPH_CLK("sdmmc2", "sdhci-tegra.1", NULL, 9, 0x154, 52000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* scales with voltage */ PERIPH_CLK("sdmmc3", "sdhci-tegra.2", NULL, 69, 0x1bc, 52000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* scales with voltage */ PERIPH_CLK("sdmmc4", "sdhci-tegra.3", NULL, 15, 0x164, 52000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* scales with voltage */ - PERIPH_CLK("vde", "vde", NULL, 61, 0x1c8, 250000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* scales with voltage and process_id */ + PERIPH_CLK("vcp", "tegra-avp", "vcp", 29, 0, 250000000, mux_clk_m, 0), + PERIPH_CLK("bsea", "tegra-avp", "bsea", 62, 0, 250000000, mux_clk_m, 0), + PERIPH_CLK("bsev", "tegra-aes", "bsev", 63, 0, 250000000, mux_clk_m, 0), + PERIPH_CLK("vde", "tegra-avp", "vde", 61, 0x1c8, 250000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* scales with voltage and process_id */ PERIPH_CLK("csite", "csite", NULL, 73, 0x1d4, 144000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* max rate ??? */ /* FIXME: what is la? */ PERIPH_CLK("la", "la", NULL, 76, 0x1f8, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), @@ -2127,6 +2143,18 @@ struct clk tegra_list_clks[] = { PERIPH_CLK("pex", NULL, "pex", 70, 0, 26000000, mux_clk_m, PERIPH_MANUAL_RESET), PERIPH_CLK("afi", NULL, "afi", 72, 0, 26000000, mux_clk_m, PERIPH_MANUAL_RESET), PERIPH_CLK("pcie_xclk", NULL, "pcie_xclk", 74, 0, 26000000, mux_clk_m, PERIPH_MANUAL_RESET), + + SHARED_CLK("avp.sclk", "tegra-avp", "sclk", &tegra_clk_sclk), + SHARED_CLK("avp.emc", "tegra-avp", "emc", &tegra_clk_emc), + SHARED_CLK("cpu.emc", "cpu", "emc", &tegra_clk_emc), + SHARED_CLK("disp1.emc", "tegradc.0", "emc", &tegra_clk_emc), + SHARED_CLK("disp2.emc", "tegradc.1", "emc", &tegra_clk_emc), + SHARED_CLK("hdmi.emc", "hdmi", "emc", &tegra_clk_emc), + SHARED_CLK("host.emc", "tegra_grhost", "emc", &tegra_clk_emc), + SHARED_CLK("usbd.emc", "fsl-tegra-udc", "emc", &tegra_clk_emc), + SHARED_CLK("usb1.emc", "tegra-ehci.0", "emc", &tegra_clk_emc), + SHARED_CLK("usb2.emc", "tegra-ehci.1", "emc", &tegra_clk_emc), + SHARED_CLK("usb3.emc", "tegra-ehci.2", "emc", &tegra_clk_emc), }; #define CLK_DUPLICATE(_name, _dev, _con) \ @@ -2157,6 +2185,13 @@ struct clk_duplicate tegra_clk_duplicates[] = { CLK_DUPLICATE("pwm", "tegra_pwm.1", NULL), CLK_DUPLICATE("pwm", "tegra_pwm.2", NULL), CLK_DUPLICATE("pwm", "tegra_pwm.3", NULL), + CLK_DUPLICATE("host1x", "tegra_grhost", "host1x"), + CLK_DUPLICATE("2d", "tegra_grhost", "gr2d"), + CLK_DUPLICATE("3d", "tegra_grhost", "gr3d"), + CLK_DUPLICATE("epp", "tegra_grhost", "epp"), + CLK_DUPLICATE("mpe", "tegra_grhost", "mpe"), + CLK_DUPLICATE("cop", "tegra-avp", "cop"), + CLK_DUPLICATE("vde", "tegra-aes", "vde"), }; #define CLK(dev, con, ck) \ @@ -2195,6 +2230,7 @@ struct clk *tegra_ptr_clks[] = { &tegra_dev2_clk, &tegra_clk_virtual_cpu, &tegra_clk_blink, + &tegra_clk_cop, &tegra_clk_emc, }; -- cgit v1.2.3-18-g5258 From 69efcc6d90d234a3a076afb2c635c1609536faa4 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 21 Feb 2011 10:58:13 +0100 Subject: x86-64, NUMA: Do not scan two times for setup_node_bootmem() By the time setup_node_bootmem() is called, all the memblocks are already registered. As node_data is allocated from these memblocks, calling it more than once doesn't make any difference. Drop the loop. tj: Dropped comment referencing to the old behavior as suggested by David and rephrased the description. Signed-off-by: Yinghai Lu Acked-by: David Rientjes Signed-off-by: Tejun Heo --- arch/x86/mm/numa_64.c | 32 ++++++++++++-------------------- 1 file changed, 12 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index f6d85e38047..6e4ee96d1b1 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -480,7 +480,7 @@ static bool __init numa_meminfo_cover_memory(const struct numa_meminfo *mi) static int __init numa_register_memblks(struct numa_meminfo *mi) { - int i, j, nid; + int i, nid; /* Account for nodes with cpus and no memory */ node_possible_map = numa_nodes_parsed; @@ -506,28 +506,20 @@ static int __init numa_register_memblks(struct numa_meminfo *mi) init_memory_mapping_high(); - /* - * Finally register nodes. Do it twice in case setup_node_bootmem - * missed one due to missing bootmem. - */ - for (i = 0; i < 2; i++) { - for_each_node_mask(nid, node_possible_map) { - u64 start = (u64)max_pfn << PAGE_SHIFT; - u64 end = 0; + /* Finally register nodes. */ + for_each_node_mask(nid, node_possible_map) { + u64 start = (u64)max_pfn << PAGE_SHIFT; + u64 end = 0; - if (node_online(nid)) + for (i = 0; i < mi->nr_blks; i++) { + if (nid != mi->blk[i].nid) continue; - - for (j = 0; j < mi->nr_blks; j++) { - if (nid != mi->blk[j].nid) - continue; - start = min(mi->blk[j].start, start); - end = max(mi->blk[j].end, end); - } - - if (start < end) - setup_node_bootmem(nid, start, end); + start = min(mi->blk[i].start, start); + end = max(mi->blk[i].end, end); } + + if (start < end) + setup_node_bootmem(nid, start, end); } return 0; -- cgit v1.2.3-18-g5258 From 646e610d403e1ad977530c1b0a87dabc8293b5ef Mon Sep 17 00:00:00 2001 From: Frank Li Date: Mon, 21 Feb 2011 14:28:10 +0800 Subject: ARM: imx53_smd add uncompress print Signed-off-by: Frank Li Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/include/mach/uncompress.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h index b7028845b1a..74125588621 100644 --- a/arch/arm/plat-mxc/include/mach/uncompress.h +++ b/arch/arm/plat-mxc/include/mach/uncompress.h @@ -112,6 +112,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) break; case MACH_TYPE_MX53_EVK: case MACH_TYPE_MX53_LOCO: + case MACH_TYPE_MX53_SMD: uart_base = MX53_UART1_BASE_ADDR; break; default: -- cgit v1.2.3-18-g5258 From 503e1639654b5a7ef80557985fef8a36a785b9e1 Mon Sep 17 00:00:00 2001 From: Richard Zhao Date: Fri, 18 Feb 2011 20:26:30 +0800 Subject: ARM: imx53: correct Silicon Revision definition following fuse map Signed-off-by: Richard Zhao Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/cpu.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c index d40671da437..df46b5e6085 100644 --- a/arch/arm/mach-mx5/cpu.c +++ b/arch/arm/mach-mx5/cpu.c @@ -78,11 +78,16 @@ static int get_mx53_srev(void) void __iomem *iim_base = MX51_IO_ADDRESS(MX53_IIM_BASE_ADDR); u32 rev = readl(iim_base + IIM_SREV) & 0xff; - if (rev == 0x0) + switch (rev) { + case 0x0: return IMX_CHIP_REVISION_1_0; - else if (rev == 0x10) + case 0x2: return IMX_CHIP_REVISION_2_0; - return 0; + case 0x3: + return IMX_CHIP_REVISION_2_1; + default: + return IMX_CHIP_REVISION_UNKNOWN; + } } /* -- cgit v1.2.3-18-g5258 From e33b9d0878ff6b8a543b3423c3019a5dbbf5689a Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 20 Feb 2011 11:47:41 +0000 Subject: ARM: Use long long format when printing meminfo physical addresses Acked-by: Will Deacon Signed-off-by: Russell King --- arch/arm/mm/mmu.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index e09744e82d5..17674901093 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -794,9 +794,10 @@ static void __init sanity_check_meminfo(void) */ if (__va(bank->start) >= vmalloc_min || __va(bank->start) < (void *)PAGE_OFFSET) { - printk(KERN_NOTICE "Ignoring RAM at %.8lx-%.8lx " + printk(KERN_NOTICE "Ignoring RAM at %.8llx-%.8llx " "(vmalloc region overlap).\n", - bank->start, bank->start + bank->size - 1); + (unsigned long long)bank->start, + (unsigned long long)bank->start + bank->size - 1); continue; } @@ -807,10 +808,11 @@ static void __init sanity_check_meminfo(void) if (__va(bank->start + bank->size) > vmalloc_min || __va(bank->start + bank->size) < __va(bank->start)) { unsigned long newsize = vmalloc_min - __va(bank->start); - printk(KERN_NOTICE "Truncating RAM at %.8lx-%.8lx " - "to -%.8lx (vmalloc region overlap).\n", - bank->start, bank->start + bank->size - 1, - bank->start + newsize - 1); + printk(KERN_NOTICE "Truncating RAM at %.8llx-%.8llx " + "to -%.8llx (vmalloc region overlap).\n", + (unsigned long long)bank->start, + (unsigned long long)bank->start + bank->size - 1, + (unsigned long long)bank->start + newsize - 1); bank->size = newsize; } #endif -- cgit v1.2.3-18-g5258 From f60892d3e36dcdd0d9f30db05beae7a446a93f28 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Tue, 15 Feb 2011 12:44:10 +0100 Subject: ARM: 6673/1: LPAE: use phys_addr_t instead of unsigned long for start of membanks The unsigned long datatype is not sufficient for mapping physical addresses >= 4GB. This patch ensures that the phys_addr_t datatype is used to represent the start address of a membank, which may reside above the 4GB boundary. Acked-by: Catalin Marinas Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/include/asm/setup.h | 2 +- arch/arm/kernel/setup.c | 5 +++-- 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index f1e5a9bca24..50921182b7c 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -199,7 +199,7 @@ static struct tagtable __tagtable_##fn __tag = { tag, fn } #endif struct membank { - unsigned long start; + phys_addr_t start; unsigned long size; unsigned int highmem; }; diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 77af580953e..9d4a84402ae 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -442,7 +442,7 @@ static struct machine_desc * __init setup_machine(unsigned int nr) return list; } -static int __init arm_add_memory(unsigned long start, unsigned long size) +static int __init arm_add_memory(phys_addr_t start, unsigned long size) { struct membank *bank = &meminfo.bank[meminfo.nr_banks]; @@ -478,7 +478,8 @@ static int __init arm_add_memory(unsigned long start, unsigned long size) static int __init early_mem(char *p) { static int usermem __initdata = 0; - unsigned long size, start; + unsigned long size; + phys_addr_t start; char *endp; /* -- cgit v1.2.3-18-g5258 From 516295e5ab4bf986865cfff856d484ec678e3b0b Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 21 Nov 2010 16:27:49 +0000 Subject: ARM: pgtable: add pud-level code Add pud_offset() et.al. between the pgd and pmd code in preparation of using pgtable-nopud.h rather than 4level-fixup.h. This incorporates a fix from Jamie Iles for uaccess_with_memcpy.c. Signed-off-by: Russell King --- arch/arm/include/asm/pgtable.h | 1 + arch/arm/lib/uaccess_with_memcpy.c | 7 ++++++- arch/arm/mm/dma-mapping.c | 11 ++++++++++- arch/arm/mm/fault-armv.c | 7 ++++++- arch/arm/mm/fault.c | 29 +++++++++++++++++++++++++---- arch/arm/mm/idmap.c | 35 +++++++++++++++++++++++++++++------ arch/arm/mm/mm.h | 2 +- arch/arm/mm/mmu.c | 22 ++++++++++++++++++---- arch/arm/mm/pgd.c | 24 ++++++++++++++++++++---- 9 files changed, 116 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index ca567914d30..5750704e027 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -301,6 +301,7 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; #define pgd_present(pgd) (1) #define pgd_clear(pgdp) do { } while (0) #define set_pgd(pgd,pgdp) do { } while (0) +#define set_pud(pud,pudp) do { } while (0) /* Find an entry in the second-level page table.. */ diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c index e2d2f2cd0c4..8b9b13649f8 100644 --- a/arch/arm/lib/uaccess_with_memcpy.c +++ b/arch/arm/lib/uaccess_with_memcpy.c @@ -27,13 +27,18 @@ pin_page_for_write(const void __user *_addr, pte_t **ptep, spinlock_t **ptlp) pgd_t *pgd; pmd_t *pmd; pte_t *pte; + pud_t *pud; spinlock_t *ptl; pgd = pgd_offset(current->mm, addr); if (unlikely(pgd_none(*pgd) || pgd_bad(*pgd))) return 0; - pmd = pmd_offset(pgd, addr); + pud = pud_offset(pgd, addr); + if (unlikely(pud_none(*pud) || pud_bad(*pud))) + return 0; + + pmd = pmd_offset(pud, addr); if (unlikely(pmd_none(*pmd) || pmd_bad(*pmd))) return 0; diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index ac6a36142fc..a9bdfcda23f 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -148,6 +148,7 @@ static int __init consistent_init(void) { int ret = 0; pgd_t *pgd; + pud_t *pud; pmd_t *pmd; pte_t *pte; int i = 0; @@ -155,7 +156,15 @@ static int __init consistent_init(void) do { pgd = pgd_offset(&init_mm, base); - pmd = pmd_alloc(&init_mm, pgd, base); + + pud = pud_alloc(&init_mm, pgd, base); + if (!pud) { + printk(KERN_ERR "%s: no pud tables\n", __func__); + ret = -ENOMEM; + break; + } + + pmd = pmd_alloc(&init_mm, pud, base); if (!pmd) { printk(KERN_ERR "%s: no pmd tables\n", __func__); ret = -ENOMEM; diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c index 01210dba022..7cab7917942 100644 --- a/arch/arm/mm/fault-armv.c +++ b/arch/arm/mm/fault-armv.c @@ -95,6 +95,7 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address, { spinlock_t *ptl; pgd_t *pgd; + pud_t *pud; pmd_t *pmd; pte_t *pte; int ret; @@ -103,7 +104,11 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address, if (pgd_none_or_clear_bad(pgd)) return 0; - pmd = pmd_offset(pgd, address); + pud = pud_offset(pgd, address); + if (pud_none_or_clear_bad(pud)) + return 0; + + pmd = pmd_offset(pud, address); if (pmd_none_or_clear_bad(pmd)) return 0; diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index ef0e24f578e..bc0e1d88fd3 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -80,6 +80,7 @@ void show_pte(struct mm_struct *mm, unsigned long addr) addr, (long long)pgd_val(*pgd)); do { + pud_t *pud; pmd_t *pmd; pte_t *pte; @@ -91,7 +92,19 @@ void show_pte(struct mm_struct *mm, unsigned long addr) break; } - pmd = pmd_offset(pgd, addr); + pud = pud_offset(pgd, addr); + if (PTRS_PER_PUD != 1) + printk(", *pud=%08lx", pud_val(*pud)); + + if (pud_none(*pud)) + break; + + if (pud_bad(*pud)) { + printk("(bad)"); + break; + } + + pmd = pmd_offset(pud, addr); if (PTRS_PER_PMD != 1) printk(", *pmd=%08llx", (long long)pmd_val(*pmd)); @@ -390,6 +403,7 @@ do_translation_fault(unsigned long addr, unsigned int fsr, { unsigned int index; pgd_t *pgd, *pgd_k; + pud_t *pud, *pud_k; pmd_t *pmd, *pmd_k; if (addr < TASK_SIZE) @@ -408,12 +422,19 @@ do_translation_fault(unsigned long addr, unsigned int fsr, if (pgd_none(*pgd_k)) goto bad_area; - if (!pgd_present(*pgd)) set_pgd(pgd, *pgd_k); - pmd_k = pmd_offset(pgd_k, addr); - pmd = pmd_offset(pgd, addr); + pud = pud_offset(pgd, addr); + pud_k = pud_offset(pgd_k, addr); + + if (pud_none(*pud_k)) + goto bad_area; + if (!pud_present(*pud)) + set_pud(pud, *pud_k); + + pmd = pmd_offset(pud, addr); + pmd_k = pmd_offset(pud_k, addr); /* * On ARM one Linux PGD entry contains two hardware entries (see page diff --git a/arch/arm/mm/idmap.c b/arch/arm/mm/idmap.c index 57299446f78..2be9139a4ef 100644 --- a/arch/arm/mm/idmap.c +++ b/arch/arm/mm/idmap.c @@ -4,10 +4,10 @@ #include #include -static void idmap_add_pmd(pgd_t *pgd, unsigned long addr, unsigned long end, +static void idmap_add_pmd(pud_t *pud, unsigned long addr, unsigned long end, unsigned long prot) { - pmd_t *pmd = pmd_offset(pgd, addr); + pmd_t *pmd = pmd_offset(pud, addr); addr = (addr & PMD_MASK) | prot; pmd[0] = __pmd(addr); @@ -16,6 +16,18 @@ static void idmap_add_pmd(pgd_t *pgd, unsigned long addr, unsigned long end, flush_pmd_entry(pmd); } +static void idmap_add_pud(pgd_t *pgd, unsigned long addr, unsigned long end, + unsigned long prot) +{ + pud_t *pud = pud_offset(pgd, addr); + unsigned long next; + + do { + next = pud_addr_end(addr, end); + idmap_add_pmd(pud, addr, next, prot); + } while (pud++, addr = next, addr != end); +} + void identity_mapping_add(pgd_t *pgd, unsigned long addr, unsigned long end) { unsigned long prot, next; @@ -27,17 +39,28 @@ void identity_mapping_add(pgd_t *pgd, unsigned long addr, unsigned long end) pgd += pgd_index(addr); do { next = pgd_addr_end(addr, end); - idmap_add_pmd(pgd, addr, next, prot); + idmap_add_pud(pgd, addr, next, prot); } while (pgd++, addr = next, addr != end); } #ifdef CONFIG_SMP -static void idmap_del_pmd(pgd_t *pgd, unsigned long addr, unsigned long end) +static void idmap_del_pmd(pud_t *pud, unsigned long addr, unsigned long end) { - pmd_t *pmd = pmd_offset(pgd, addr); + pmd_t *pmd = pmd_offset(pud, addr); pmd_clear(pmd); } +static void idmap_del_pud(pgd_t *pgd, unsigned long addr, unsigned long end) +{ + pud_t *pud = pud_offset(pgd, addr); + unsigned long next; + + do { + next = pud_addr_end(addr, end); + idmap_del_pmd(pud, addr, next); + } while (pud++, addr = next, addr != end); +} + void identity_mapping_del(pgd_t *pgd, unsigned long addr, unsigned long end) { unsigned long next; @@ -45,7 +68,7 @@ void identity_mapping_del(pgd_t *pgd, unsigned long addr, unsigned long end) pgd += pgd_index(addr); do { next = pgd_addr_end(addr, end); - idmap_del_pmd(pgd, addr, next); + idmap_del_pud(pgd, addr, next); } while (pgd++, addr = next, addr != end); } #endif diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index 36960df5fb7..d2384106af9 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -7,7 +7,7 @@ extern pmd_t *top_pmd; static inline pmd_t *pmd_off(pgd_t *pgd, unsigned long virt) { - return pmd_offset(pgd, virt); + return pmd_offset(pud_offset(pgd, virt), virt); } static inline pmd_t *pmd_off_k(unsigned long virt) diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 17674901093..82ef6966ae0 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -550,11 +550,11 @@ static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr, } while (pte++, addr += PAGE_SIZE, addr != end); } -static void __init alloc_init_section(pgd_t *pgd, unsigned long addr, +static void __init alloc_init_section(pud_t *pud, unsigned long addr, unsigned long end, phys_addr_t phys, const struct mem_type *type) { - pmd_t *pmd = pmd_offset(pgd, addr); + pmd_t *pmd = pmd_offset(pud, addr); /* * Try a section mapping - end, addr and phys must all be aligned @@ -583,6 +583,19 @@ static void __init alloc_init_section(pgd_t *pgd, unsigned long addr, } } +static void alloc_init_pud(pgd_t *pgd, unsigned long addr, unsigned long end, + unsigned long phys, const struct mem_type *type) +{ + pud_t *pud = pud_offset(pgd, addr); + unsigned long next; + + do { + next = pud_addr_end(addr, end); + alloc_init_section(pud, addr, next, phys, type); + phys += next - addr; + } while (pud++, addr = next, addr != end); +} + static void __init create_36bit_mapping(struct map_desc *md, const struct mem_type *type) { @@ -630,7 +643,8 @@ static void __init create_36bit_mapping(struct map_desc *md, pgd = pgd_offset_k(addr); end = addr + length; do { - pmd_t *pmd = pmd_offset(pgd, addr); + pud_t *pud = pud_offset(pgd, addr); + pmd_t *pmd = pmd_offset(pud, addr); int i; for (i = 0; i < 16; i++) @@ -696,7 +710,7 @@ static void __init create_mapping(struct map_desc *md) do { unsigned long next = pgd_addr_end(addr, end); - alloc_init_section(pgd, addr, next, phys, type); + alloc_init_pud(pgd, addr, next, phys, type); phys += next - addr; addr = next; diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c index 93292a18cf7..f7fafb1741f 100644 --- a/arch/arm/mm/pgd.c +++ b/arch/arm/mm/pgd.c @@ -23,6 +23,7 @@ pgd_t *pgd_alloc(struct mm_struct *mm) { pgd_t *new_pgd, *init_pgd; + pud_t *new_pud, *init_pud; pmd_t *new_pmd, *init_pmd; pte_t *new_pte, *init_pte; @@ -46,7 +47,11 @@ pgd_t *pgd_alloc(struct mm_struct *mm) * On ARM, first page must always be allocated since it * contains the machine vectors. */ - new_pmd = pmd_alloc(mm, new_pgd, 0); + new_pud = pud_alloc(mm, new_pgd, 0); + if (!new_pud) + goto no_pud; + + new_pmd = pmd_alloc(mm, new_pud, 0); if (!new_pmd) goto no_pmd; @@ -54,7 +59,8 @@ pgd_t *pgd_alloc(struct mm_struct *mm) if (!new_pte) goto no_pte; - init_pmd = pmd_offset(init_pgd, 0); + init_pud = pud_offset(init_pgd, 0); + init_pmd = pmd_offset(init_pud, 0); init_pte = pte_offset_map(init_pmd, 0); set_pte_ext(new_pte, *init_pte, 0); pte_unmap(init_pte); @@ -66,6 +72,8 @@ pgd_t *pgd_alloc(struct mm_struct *mm) no_pte: pmd_free(mm, new_pmd); no_pmd: + pud_free(mm, new_pud); +no_pud: free_pages((unsigned long)new_pgd, 2); no_pgd: return NULL; @@ -74,6 +82,7 @@ no_pgd: void pgd_free(struct mm_struct *mm, pgd_t *pgd_base) { pgd_t *pgd; + pud_t *pud; pmd_t *pmd; pgtable_t pte; @@ -84,7 +93,11 @@ void pgd_free(struct mm_struct *mm, pgd_t *pgd_base) if (pgd_none_or_clear_bad(pgd)) goto no_pgd; - pmd = pmd_offset(pgd, 0); + pud = pud_offset(pgd, 0); + if (pud_none_or_clear_bad(pud)) + goto no_pud; + + pmd = pmd_offset(pud, 0); if (pmd_none_or_clear_bad(pmd)) goto no_pmd; @@ -92,8 +105,11 @@ void pgd_free(struct mm_struct *mm, pgd_t *pgd_base) pmd_clear(pmd); pte_free(mm, pte); no_pmd: - pgd_clear(pgd); + pud_clear(pud); pmd_free(mm, pmd); +no_pud: + pgd_clear(pgd); + pud_free(mm, pud); no_pgd: free_pages((unsigned long) pgd_base, 2); } -- cgit v1.2.3-18-g5258 From d16613586aa064d87ef05e3b929e3b4fdc714cc4 Mon Sep 17 00:00:00 2001 From: viresh kumar Date: Wed, 16 Feb 2011 07:40:27 +0100 Subject: ARM: 6720/1: SPEAr: Append UL to VMALLOC_END This patch fixes following warning: arch/arm/mm/init.c:606: warning: format '%08lx' expects type 'long unsigned int', but argument 12 has type 'unsigned int' by appending UL to VMALLOC_END's Number. Reviewed-by: Stanley Miao Signed-off-by: Viresh Kumar Signed-off-by: Russell King --- arch/arm/plat-spear/include/plat/vmalloc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-spear/include/plat/vmalloc.h b/arch/arm/plat-spear/include/plat/vmalloc.h index 09e9372aea2..8c8b24d0704 100644 --- a/arch/arm/plat-spear/include/plat/vmalloc.h +++ b/arch/arm/plat-spear/include/plat/vmalloc.h @@ -14,6 +14,6 @@ #ifndef __PLAT_VMALLOC_H #define __PLAT_VMALLOC_H -#define VMALLOC_END 0xF0000000 +#define VMALLOC_END 0xF0000000UL #endif /* __PLAT_VMALLOC_H */ -- cgit v1.2.3-18-g5258 From ac1556b37e9b06a41d7691dca0d50a28210488f9 Mon Sep 17 00:00:00 2001 From: viresh kumar Date: Wed, 16 Feb 2011 07:41:06 +0100 Subject: ARM: 6712/1: SPEAr: replace readl(), writel() with relaxed versions in uncompress.h readl() and writel() calls the outer cache maintainance operations which are not available during Linux uncompression. This patch replaces readl() and writel() with readl_relaxed() and writel_relaxed() to avoid the link time errors. Reviewed-by: Stanley Miao Signed-off-by: Viresh Kumar Signed-off-by: Russell King --- arch/arm/plat-spear/include/plat/uncompress.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-spear/include/plat/uncompress.h b/arch/arm/plat-spear/include/plat/uncompress.h index 99ba6789cc9..6dd455bafdf 100644 --- a/arch/arm/plat-spear/include/plat/uncompress.h +++ b/arch/arm/plat-spear/include/plat/uncompress.h @@ -24,10 +24,10 @@ static inline void putc(int c) { void __iomem *base = (void __iomem *)SPEAR_DBG_UART_BASE; - while (readl(base + UART01x_FR) & UART01x_FR_TXFF) + while (readl_relaxed(base + UART01x_FR) & UART01x_FR_TXFF) barrier(); - writel(c, base + UART01x_DR); + writel_relaxed(c, base + UART01x_DR); } static inline void flush(void) -- cgit v1.2.3-18-g5258 From b8272a61c16decd4c8627fc1181bdd174c922c3f Mon Sep 17 00:00:00 2001 From: Shiraz Hashim Date: Wed, 16 Feb 2011 07:40:29 +0100 Subject: ARM: 6722/1: SPEAr: sp810: switch to slow mode before reset In sysctl_soft_reset(), switch to slow mode before resetting the system via the system controller. This is required. Reviewed-by: Stanley Miao Signed-off-by: Shiraz Hashim Signed-off-by: Russell King --- arch/arm/include/asm/hardware/sp810.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/include/asm/hardware/sp810.h b/arch/arm/include/asm/hardware/sp810.h index 721847dc68a..e0d1c0cfa54 100644 --- a/arch/arm/include/asm/hardware/sp810.h +++ b/arch/arm/include/asm/hardware/sp810.h @@ -58,6 +58,9 @@ static inline void sysctl_soft_reset(void __iomem *base) { + /* switch to slow mode */ + writel(0x2, base + SCCTRL); + /* writing any value to SCSYSSTAT reg will reset system */ writel(0, base + SCSYSSTAT); } -- cgit v1.2.3-18-g5258 From 167879ae8924540660b187d759956f316dd6e8fe Mon Sep 17 00:00:00 2001 From: viresh kumar Date: Wed, 16 Feb 2011 07:40:41 +0100 Subject: ARM: 6700/1: SPEAr: Correct SOC config base address for spear320 SPEAR320_SOC_CONFIG_BASE was wrong, causing the wrong registers to be accessed. Reviewed-by: Stanley Miao Signed-off-by: Viresh Kumar Signed-off-by: Russell King --- arch/arm/mach-spear3xx/include/mach/spear320.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-spear3xx/include/mach/spear320.h b/arch/arm/mach-spear3xx/include/mach/spear320.h index cacf17a958c..53677e464d4 100644 --- a/arch/arm/mach-spear3xx/include/mach/spear320.h +++ b/arch/arm/mach-spear3xx/include/mach/spear320.h @@ -62,7 +62,7 @@ #define SPEAR320_SMII1_BASE 0xAB000000 #define SPEAR320_SMII1_SIZE 0x01000000 -#define SPEAR320_SOC_CONFIG_BASE 0xB4000000 +#define SPEAR320_SOC_CONFIG_BASE 0xB3000000 #define SPEAR320_SOC_CONFIG_SIZE 0x00000070 /* Interrupt registers offsets and masks */ #define INT_STS_MASK_REG 0x04 -- cgit v1.2.3-18-g5258 From dc810efb0ca5702c9d96782b99282d4b4383e877 Mon Sep 17 00:00:00 2001 From: Pawel Moll Date: Wed, 16 Feb 2011 18:54:01 +0100 Subject: ARM: 6740/1: Place correctly notes section in the linker script Commit 18991197b4b588255ccabf472ebc84db7b66a19c added --build-id linker option when toolchain supports it. ARM one does, but for some reason places the section at 0 when linker script doesn't mention it explicitly. The 1e621a8e3752367d4aae78a8ab00a18fb2793f34 worked around the problem removing this section from binary image with explicit objcopy options, but it still exists in vmlinux, confusing tools like debuggers and perf. This problem was discussed here: http://lists.infradead.org/pipermail/linux-arm-kernel/2010-May/015994.html http://lists.infradead.org/pipermail/linux-arm-kernel/2010-May/015994.html but the proposed changes to the linker script were substantial. This patch simply places NOTES (36 bytes long, at least when compiled with CodeSourcery toolchain) between data and bss, which seem to be the right place (and suggested by the sample linker script in include/asm-generic/vmlinux.lds.h). It is enough to place it correctly in vmlinux (so debuggers are happy): Section Headers: [11] .data PROGBITS c07ce000 7ce000 020fc0 00 WA 0 0 32 [12] .notes NOTE c07eefc0 7eefc0 000024 00 AX 0 0 4 [13] .bss NOBITS c07ef000 7eefe4 01e628 00 WA 0 0 32 Program Headers: LOAD 0x008000 0xc0008000 0xc0008000 0x7e6fe4 0x805628 RWE 0x8000 NOTE 0x7eefc0 0xc07eefc0 0xc07eefc0 0x00024 0x00024 R E 0x4 Section to Segment mapping: Segment Sections... 00 <...> .data .notes .bss 01 .notes and to get it exposed as /sys/kernel/notes used by perf tools. Signed-off-by: Pawel Moll Signed-off-by: Russell King --- arch/arm/Makefile | 2 +- arch/arm/kernel/vmlinux.lds.S | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/Makefile b/arch/arm/Makefile index c22c1adfedd..6f7b29294c8 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -15,7 +15,7 @@ ifeq ($(CONFIG_CPU_ENDIAN_BE8),y) LDFLAGS_vmlinux += --be8 endif -OBJCOPYFLAGS :=-O binary -R .note -R .note.gnu.build-id -R .comment -S +OBJCOPYFLAGS :=-O binary -R .comment -S GZFLAGS :=-9 #KBUILD_CFLAGS +=-pipe # Explicitly specifiy 32-bit ARM ISA since toolchain default can be -mthumb: diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 86b66f3f203..558bd81a4fc 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -247,6 +247,8 @@ SECTIONS } #endif + NOTES + BSS_SECTION(0, 0, 0) _end = .; -- cgit v1.2.3-18-g5258 From 53399053eb505cf541b2405bd9d9bca5ecfb96fb Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 20 Feb 2011 12:22:52 +0000 Subject: ARM: Ensure predictable endian state on signal handler entry Ensure a predictable endian state when entering signal handlers. This avoids programs which use SETEND to momentarily switch their endian state from having their signal handlers entered with an unpredictable endian state. Cc: Acked-by: Dave Martin Signed-off-by: Russell King --- arch/arm/kernel/signal.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 907d5a620bc..abaf8445ce2 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -474,7 +474,9 @@ setup_return(struct pt_regs *regs, struct k_sigaction *ka, unsigned long handler = (unsigned long)ka->sa.sa_handler; unsigned long retcode; int thumb = 0; - unsigned long cpsr = regs->ARM_cpsr & ~PSR_f; + unsigned long cpsr = regs->ARM_cpsr & ~(PSR_f | PSR_E_BIT); + + cpsr |= PSR_ENDSTATE; /* * Maybe we need to deliver a 32-bit signal to a 26-bit task. -- cgit v1.2.3-18-g5258 From a9ad21fed09cb95d34af9474be0831525b30c4c6 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 21 Feb 2011 10:13:36 +0000 Subject: ARM: Keep exit text/data around for SMP_ON_UP When SMP_ON_UP is used and the spinlocks are inlined, we end up with inline spinlocks in the exit code, with references from the SMP alternatives section to the exit sections. This causes link time errors. Avoid this by placing the exit sections in the init-discarded region. Cc: Tested-by: Dave Martin Signed-off-by: Russell King --- arch/arm/kernel/vmlinux.lds.S | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 558bd81a4fc..61462790757 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -21,6 +21,12 @@ #define ARM_CPU_KEEP(x) #endif +#if defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK) +#define ARM_EXIT_KEEP(x) x +#else +#define ARM_EXIT_KEEP(x) +#endif + OUTPUT_ARCH(arm) ENTRY(stext) @@ -43,6 +49,7 @@ SECTIONS _sinittext = .; HEAD_TEXT INIT_TEXT + ARM_EXIT_KEEP(EXIT_TEXT) _einittext = .; ARM_CPU_DISCARD(PROC_INFO) __arch_info_begin = .; @@ -67,6 +74,7 @@ SECTIONS #ifndef CONFIG_XIP_KERNEL __init_begin = _stext; INIT_DATA + ARM_EXIT_KEEP(EXIT_DATA) #endif } @@ -162,6 +170,7 @@ SECTIONS . = ALIGN(PAGE_SIZE); __init_begin = .; INIT_DATA + ARM_EXIT_KEEP(EXIT_DATA) . = ALIGN(PAGE_SIZE); __init_end = .; #endif -- cgit v1.2.3-18-g5258 From 06824ba824b3e9f2fedb38bee79af0643198ed7f Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 20 Feb 2011 12:16:45 +0000 Subject: ARM: tlb: delay page freeing for SMP and ARMv7 CPUs We need to delay freeing any mapped page on SMP and ARMv7 systems to ensure that the data is not accessed by other CPUs, or is used for speculative prefetch with ARMv7. This includes not only mapped pages but also pages used for the page tables themselves. This avoids races with the MMU/other CPUs accessing pages after they've been freed but before we've invalidated the TLB. Signed-off-by: Russell King --- arch/arm/include/asm/tlb.h | 102 +++++++++++++++++++++++++++++++++++++++------ 1 file changed, 89 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index f41a6f57cd1..e7690887b95 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -18,7 +18,6 @@ #define __ASMARM_TLB_H #include -#include #ifndef CONFIG_MMU @@ -27,7 +26,23 @@ #else /* !CONFIG_MMU */ +#include #include +#include + +/* + * We need to delay page freeing for SMP as other CPUs can access pages + * which have been removed but not yet had their TLB entries invalidated. + * Also, as ARMv7 speculative prefetch can drag new entries into the TLB, + * we need to apply this same delaying tactic to ensure correct operation. + */ +#if defined(CONFIG_SMP) || defined(CONFIG_CPU_32v7) +#define tlb_fast_mode(tlb) 0 +#define FREE_PTE_NR 500 +#else +#define tlb_fast_mode(tlb) 1 +#define FREE_PTE_NR 0 +#endif /* * TLB handling. This allows us to remove pages from the page @@ -36,12 +51,58 @@ struct mmu_gather { struct mm_struct *mm; unsigned int fullmm; + struct vm_area_struct *vma; unsigned long range_start; unsigned long range_end; + unsigned int nr; + struct page *pages[FREE_PTE_NR]; }; DECLARE_PER_CPU(struct mmu_gather, mmu_gathers); +/* + * This is unnecessarily complex. There's three ways the TLB shootdown + * code is used: + * 1. Unmapping a range of vmas. See zap_page_range(), unmap_region(). + * tlb->fullmm = 0, and tlb_start_vma/tlb_end_vma will be called. + * tlb->vma will be non-NULL. + * 2. Unmapping all vmas. See exit_mmap(). + * tlb->fullmm = 1, and tlb_start_vma/tlb_end_vma will be called. + * tlb->vma will be non-NULL. Additionally, page tables will be freed. + * 3. Unmapping argument pages. See shift_arg_pages(). + * tlb->fullmm = 0, but tlb_start_vma/tlb_end_vma will not be called. + * tlb->vma will be NULL. + */ +static inline void tlb_flush(struct mmu_gather *tlb) +{ + if (tlb->fullmm || !tlb->vma) + flush_tlb_mm(tlb->mm); + else if (tlb->range_end > 0) { + flush_tlb_range(tlb->vma, tlb->range_start, tlb->range_end); + tlb->range_start = TASK_SIZE; + tlb->range_end = 0; + } +} + +static inline void tlb_add_flush(struct mmu_gather *tlb, unsigned long addr) +{ + if (!tlb->fullmm) { + if (addr < tlb->range_start) + tlb->range_start = addr; + if (addr + PAGE_SIZE > tlb->range_end) + tlb->range_end = addr + PAGE_SIZE; + } +} + +static inline void tlb_flush_mmu(struct mmu_gather *tlb) +{ + tlb_flush(tlb); + if (!tlb_fast_mode(tlb)) { + free_pages_and_swap_cache(tlb->pages, tlb->nr); + tlb->nr = 0; + } +} + static inline struct mmu_gather * tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush) { @@ -49,6 +110,8 @@ tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush) tlb->mm = mm; tlb->fullmm = full_mm_flush; + tlb->vma = NULL; + tlb->nr = 0; return tlb; } @@ -56,8 +119,7 @@ tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush) static inline void tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) { - if (tlb->fullmm) - flush_tlb_mm(tlb->mm); + tlb_flush_mmu(tlb); /* keep the page table cache within bounds */ check_pgt_cache(); @@ -71,12 +133,7 @@ tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) static inline void tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep, unsigned long addr) { - if (!tlb->fullmm) { - if (addr < tlb->range_start) - tlb->range_start = addr; - if (addr + PAGE_SIZE > tlb->range_end) - tlb->range_end = addr + PAGE_SIZE; - } + tlb_add_flush(tlb, addr); } /* @@ -89,6 +146,7 @@ tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) { if (!tlb->fullmm) { flush_cache_range(vma, vma->vm_start, vma->vm_end); + tlb->vma = vma; tlb->range_start = TASK_SIZE; tlb->range_end = 0; } @@ -97,12 +155,30 @@ tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) static inline void tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) { - if (!tlb->fullmm && tlb->range_end > 0) - flush_tlb_range(vma, tlb->range_start, tlb->range_end); + if (!tlb->fullmm) + tlb_flush(tlb); +} + +static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page) +{ + if (tlb_fast_mode(tlb)) { + free_page_and_swap_cache(page); + } else { + tlb->pages[tlb->nr++] = page; + if (tlb->nr >= FREE_PTE_NR) + tlb_flush_mmu(tlb); + } +} + +static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, + unsigned long addr) +{ + pgtable_page_dtor(pte); + tlb_add_flush(tlb, addr); + tlb_remove_page(tlb, pte); } -#define tlb_remove_page(tlb,page) free_page_and_swap_cache(page) -#define pte_free_tlb(tlb, ptep, addr) pte_free((tlb)->mm, ptep) +#define pte_free_tlb(tlb, ptep, addr) __pte_free_tlb(tlb, ptep, addr) #define pmd_free_tlb(tlb, pmdp, addr) pmd_free((tlb)->mm, pmdp) #define tlb_migrate_finish(mm) do { } while (0) -- cgit v1.2.3-18-g5258 From 58e9c47fa0dd76693b2c85c010c7430a4de77c6d Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 20 Feb 2011 12:27:49 +0000 Subject: ARM: tlb: move noMMU tlb_flush() to asm/tlb.h There's no need to noMMU to put tlb_flush() in asm/tlbflush.h - it's part of the tlb shootdown interface. Move it to asm/tlb.h instead, as per x86. Signed-off-by: Russell King --- arch/arm/include/asm/tlb.h | 3 +++ arch/arm/include/asm/tlbflush.h | 7 +------ 2 files changed, 4 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index e7690887b95..82dfe5d0c41 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -22,6 +22,9 @@ #ifndef CONFIG_MMU #include + +#define tlb_flush(tlb) ((void) tlb) + #include #else /* !CONFIG_MMU */ diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h index ce7378ea15a..d2005de383b 100644 --- a/arch/arm/include/asm/tlbflush.h +++ b/arch/arm/include/asm/tlbflush.h @@ -10,12 +10,7 @@ #ifndef _ASMARM_TLBFLUSH_H #define _ASMARM_TLBFLUSH_H - -#ifndef CONFIG_MMU - -#define tlb_flush(tlb) ((void) tlb) - -#else /* CONFIG_MMU */ +#ifdef CONFIG_MMU #include -- cgit v1.2.3-18-g5258 From 5a5af730536fbf15fc354980cba2a0400afa6b76 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Mon, 21 Feb 2011 04:37:20 +0100 Subject: ARM: 6745/1: kprobes insn decoding fix Marcin Slusarz says: > In arch/arm/kernel/kprobes-decode.c there's a function > arm_kprobe_decode_insn which does: > > } else if ((insn & 0x0e000000) == 0x0c400000) { > ... > > This is always false, so code below is dead. > I found this bug by coccinelle (http://coccinelle.lip6.fr/). Reported-by: Marcin Slusarz Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/kernel/kprobes-decode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/kernel/kprobes-decode.c b/arch/arm/kernel/kprobes-decode.c index 2c1f0050c9c..8f6ed43861f 100644 --- a/arch/arm/kernel/kprobes-decode.c +++ b/arch/arm/kernel/kprobes-decode.c @@ -1437,7 +1437,7 @@ arm_kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi) return space_cccc_1100_010x(insn, asi); - } else if ((insn & 0x0e000000) == 0x0c400000) { + } else if ((insn & 0x0e000000) == 0x0c000000) { return space_cccc_110x(insn, asi); -- cgit v1.2.3-18-g5258 From 905a74d9a0452b15bb4087a0ea48d017430e4e23 Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Fri, 18 Feb 2011 14:01:06 +0100 Subject: OMAP4: hwmod data: Add rev and dev_attr fields in McSPI - Add a rev attribute to identify various McSPI IP version. - Add a dev_attr structure to provide the number of chipselect supported by the instance. Signed-off-by: Benoit Cousson Cc: Paul Walmsley Cc: Govindraj.R Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 84e795cf064..182aa79d5e5 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -24,6 +24,7 @@ #include #include #include +#include #include "omap_hwmod_common_data.h" @@ -3114,6 +3115,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_mcspi_sysc = { static struct omap_hwmod_class omap44xx_mcspi_hwmod_class = { .name = "mcspi", .sysc = &omap44xx_mcspi_sysc, + .rev = OMAP4_MCSPI_REV, }; /* mcspi1 */ @@ -3156,6 +3158,11 @@ static struct omap_hwmod_ocp_if *omap44xx_mcspi1_slaves[] = { &omap44xx_l4_per__mcspi1, }; +/* mcspi1 dev_attr */ +static struct omap2_mcspi_dev_attr mcspi1_dev_attr = { + .num_chipselect = 4, +}; + static struct omap_hwmod omap44xx_mcspi1_hwmod = { .name = "mcspi1", .class = &omap44xx_mcspi_hwmod_class, @@ -3169,6 +3176,7 @@ static struct omap_hwmod omap44xx_mcspi1_hwmod = { .clkctrl_reg = OMAP4430_CM_L4PER_MCSPI1_CLKCTRL, }, }, + .dev_attr = &mcspi1_dev_attr, .slaves = omap44xx_mcspi1_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_mcspi1_slaves), .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), @@ -3210,6 +3218,11 @@ static struct omap_hwmod_ocp_if *omap44xx_mcspi2_slaves[] = { &omap44xx_l4_per__mcspi2, }; +/* mcspi2 dev_attr */ +static struct omap2_mcspi_dev_attr mcspi2_dev_attr = { + .num_chipselect = 2, +}; + static struct omap_hwmod omap44xx_mcspi2_hwmod = { .name = "mcspi2", .class = &omap44xx_mcspi_hwmod_class, @@ -3223,6 +3236,7 @@ static struct omap_hwmod omap44xx_mcspi2_hwmod = { .clkctrl_reg = OMAP4430_CM_L4PER_MCSPI2_CLKCTRL, }, }, + .dev_attr = &mcspi2_dev_attr, .slaves = omap44xx_mcspi2_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_mcspi2_slaves), .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), @@ -3264,6 +3278,11 @@ static struct omap_hwmod_ocp_if *omap44xx_mcspi3_slaves[] = { &omap44xx_l4_per__mcspi3, }; +/* mcspi3 dev_attr */ +static struct omap2_mcspi_dev_attr mcspi3_dev_attr = { + .num_chipselect = 2, +}; + static struct omap_hwmod omap44xx_mcspi3_hwmod = { .name = "mcspi3", .class = &omap44xx_mcspi_hwmod_class, @@ -3277,6 +3296,7 @@ static struct omap_hwmod omap44xx_mcspi3_hwmod = { .clkctrl_reg = OMAP4430_CM_L4PER_MCSPI3_CLKCTRL, }, }, + .dev_attr = &mcspi3_dev_attr, .slaves = omap44xx_mcspi3_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_mcspi3_slaves), .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), @@ -3316,6 +3336,11 @@ static struct omap_hwmod_ocp_if *omap44xx_mcspi4_slaves[] = { &omap44xx_l4_per__mcspi4, }; +/* mcspi4 dev_attr */ +static struct omap2_mcspi_dev_attr mcspi4_dev_attr = { + .num_chipselect = 1, +}; + static struct omap_hwmod omap44xx_mcspi4_hwmod = { .name = "mcspi4", .class = &omap44xx_mcspi_hwmod_class, @@ -3329,6 +3354,7 @@ static struct omap_hwmod omap44xx_mcspi4_hwmod = { .clkctrl_reg = OMAP4430_CM_L4PER_MCSPI4_CLKCTRL, }, }, + .dev_attr = &mcspi4_dev_attr, .slaves = omap44xx_mcspi4_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_mcspi4_slaves), .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), -- cgit v1.2.3-18-g5258 From d3f9c570219c72736ae2da9071f1efbf804707f7 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Fri, 28 Jan 2011 18:22:10 +0900 Subject: ARM: S5PV210: Use REGULATOR_SUPPLY macro for regulator consumers To use REGULATOR_SUPPLY macro is cleaner for initializing regulator consumer supply. Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pv210/mach-aquila.c | 52 ++++++++++++------------------------- arch/arm/mach-s5pv210/mach-goni.c | 52 ++++++++++++------------------------- 2 files changed, 34 insertions(+), 70 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index 557add4fc56..e5acb36a7a5 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -296,13 +296,11 @@ static struct regulator_init_data aquila_ldo17_data = { }; /* BUCK */ -static struct regulator_consumer_supply buck1_consumer[] = { - { .supply = "vddarm", }, -}; +static struct regulator_consumer_supply buck1_consumer = + REGULATOR_SUPPLY("vddarm", NULL); -static struct regulator_consumer_supply buck2_consumer[] = { - { .supply = "vddint", }, -}; +static struct regulator_consumer_supply buck2_consumer = + REGULATOR_SUPPLY("vddint", NULL); static struct regulator_init_data aquila_buck1_data = { .constraints = { @@ -313,8 +311,8 @@ static struct regulator_init_data aquila_buck1_data = { .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = ARRAY_SIZE(buck1_consumer), - .consumer_supplies = buck1_consumer, + .num_consumer_supplies = 1, + .consumer_supplies = &buck1_consumer, }; static struct regulator_init_data aquila_buck2_data = { @@ -326,8 +324,8 @@ static struct regulator_init_data aquila_buck2_data = { .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = ARRAY_SIZE(buck2_consumer), - .consumer_supplies = buck2_consumer, + .num_consumer_supplies = 1, + .consumer_supplies = &buck2_consumer, }; static struct regulator_init_data aquila_buck3_data = { @@ -391,26 +389,14 @@ static struct max8998_platform_data aquila_max8998_pdata = { #endif static struct regulator_consumer_supply wm8994_fixed_voltage0_supplies[] = { - { - .dev_name = "5-001a", - .supply = "DBVDD", - }, { - .dev_name = "5-001a", - .supply = "AVDD2", - }, { - .dev_name = "5-001a", - .supply = "CPVDD", - }, + REGULATOR_SUPPLY("DBVDD", "5-001a"), + REGULATOR_SUPPLY("AVDD2", "5-001a"), + REGULATOR_SUPPLY("CPVDD", "5-001a"), }; static struct regulator_consumer_supply wm8994_fixed_voltage1_supplies[] = { - { - .dev_name = "5-001a", - .supply = "SPKVDD1", - }, { - .dev_name = "5-001a", - .supply = "SPKVDD2", - }, + REGULATOR_SUPPLY("SPKVDD1", "5-001a"), + REGULATOR_SUPPLY("SPKVDD2", "5-001a"), }; static struct regulator_init_data wm8994_fixed_voltage0_init_data = { @@ -459,15 +445,11 @@ static struct platform_device wm8994_fixed_voltage1 = { }, }; -static struct regulator_consumer_supply wm8994_avdd1_supply = { - .dev_name = "5-001a", - .supply = "AVDD1", -}; +static struct regulator_consumer_supply wm8994_avdd1_supply = + REGULATOR_SUPPLY("AVDD1", "5-001a"); -static struct regulator_consumer_supply wm8994_dcvdd_supply = { - .dev_name = "5-001a", - .supply = "DCVDD", -}; +static struct regulator_consumer_supply wm8994_dcvdd_supply = + REGULATOR_SUPPLY("DCVDD", "5-001a"); static struct regulator_init_data wm8994_ldo1_data = { .constraints = { diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index 056f5c769b0..43c1c1b1c0a 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -436,13 +436,11 @@ static struct regulator_init_data goni_ldo17_data = { }; /* BUCK */ -static struct regulator_consumer_supply buck1_consumer[] = { - { .supply = "vddarm", }, -}; +static struct regulator_consumer_supply buck1_consumer = + REGULATOR_SUPPLY("vddarm", NULL); -static struct regulator_consumer_supply buck2_consumer[] = { - { .supply = "vddint", }, -}; +static struct regulator_consumer_supply buck2_consumer = + REGULATOR_SUPPLY("vddint", NULL); static struct regulator_init_data goni_buck1_data = { .constraints = { @@ -453,8 +451,8 @@ static struct regulator_init_data goni_buck1_data = { .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = ARRAY_SIZE(buck1_consumer), - .consumer_supplies = buck1_consumer, + .num_consumer_supplies = 1, + .consumer_supplies = &buck1_consumer, }; static struct regulator_init_data goni_buck2_data = { @@ -466,8 +464,8 @@ static struct regulator_init_data goni_buck2_data = { .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = ARRAY_SIZE(buck2_consumer), - .consumer_supplies = buck2_consumer, + .num_consumer_supplies = 1, + .consumer_supplies = &buck2_consumer, }; static struct regulator_init_data goni_buck3_data = { @@ -531,26 +529,14 @@ static struct max8998_platform_data goni_max8998_pdata = { #endif static struct regulator_consumer_supply wm8994_fixed_voltage0_supplies[] = { - { - .dev_name = "5-001a", - .supply = "DBVDD", - }, { - .dev_name = "5-001a", - .supply = "AVDD2", - }, { - .dev_name = "5-001a", - .supply = "CPVDD", - }, + REGULATOR_SUPPLY("DBVDD", "5-001a"), + REGULATOR_SUPPLY("AVDD2", "5-001a"), + REGULATOR_SUPPLY("CPVDD", "5-001a"), }; static struct regulator_consumer_supply wm8994_fixed_voltage1_supplies[] = { - { - .dev_name = "5-001a", - .supply = "SPKVDD1", - }, { - .dev_name = "5-001a", - .supply = "SPKVDD2", - }, + REGULATOR_SUPPLY("SPKVDD1", "5-001a"), + REGULATOR_SUPPLY("SPKVDD2", "5-001a"), }; static struct regulator_init_data wm8994_fixed_voltage0_init_data = { @@ -599,15 +585,11 @@ static struct platform_device wm8994_fixed_voltage1 = { }, }; -static struct regulator_consumer_supply wm8994_avdd1_supply = { - .dev_name = "5-001a", - .supply = "AVDD1", -}; +static struct regulator_consumer_supply wm8994_avdd1_supply = + REGULATOR_SUPPLY("AVDD1", "5-001a"); -static struct regulator_consumer_supply wm8994_dcvdd_supply = { - .dev_name = "5-001a", - .supply = "DCVDD", -}; +static struct regulator_consumer_supply wm8994_dcvdd_supply = + REGULATOR_SUPPLY("DCVDD", "5-001a"); static struct regulator_init_data wm8994_ldo1_data = { .constraints = { -- cgit v1.2.3-18-g5258 From 9c4f0a390c66cd6e85635f79ff999f1e37458af1 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Tue, 15 Feb 2011 14:27:44 +0900 Subject: ARM: S5PV210: Enable I2C0 bus on GONI board Add I2C0 bus platform device for camera sensors. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pv210/mach-goni.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index 43c1c1b1c0a..c675125b331 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -776,6 +776,7 @@ static struct platform_device *goni_devices[] __initdata = { &goni_i2c_gpio5, &mmc2_fixed_voltage, &goni_device_gpiokeys, + &s3c_device_i2c0, &s5p_device_fimc0, &s5p_device_fimc1, &s5p_device_fimc2, @@ -812,6 +813,9 @@ static void __init goni_machine_init(void) /* Radio: call before I2C 1 registeration */ goni_radio_init(); + /* I2C0 */ + s3c_i2c0_set_platdata(NULL); + /* I2C1 */ s3c_i2c1_set_platdata(NULL); i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs)); -- cgit v1.2.3-18-g5258 From 9a16afdfc2fe1117b2615ed55dff446b789bb3d5 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Tue, 15 Feb 2011 14:27:44 +0900 Subject: ARM: S5PV210: Add supplies for CIF camera on GONI board Add regulator supplies required for NOON010PC30 CIF sensor. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pv210/mach-goni.c | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index c675125b331..e06a3c50fff 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -273,6 +273,18 @@ static struct regulator_consumer_supply goni_ldo5_consumers[] = { REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"), }; +static struct regulator_consumer_supply goni_ldo11_consumers[] = { + REGULATOR_SUPPLY("vddio", "0-0030"), /* "CAM_IO_2.8V" */ +}; + +static struct regulator_consumer_supply goni_ldo13_consumers[] = { + REGULATOR_SUPPLY("vdda", "0-0030"), /* "CAM_A_2.8V" */ +}; + +static struct regulator_consumer_supply goni_ldo14_consumers[] = { + REGULATOR_SUPPLY("vdd_core", "0-0030"), /* "CAM_CIF_1.8V" */ +}; + static struct regulator_init_data goni_ldo2_data = { .constraints = { .name = "VALIVE_1.1V", @@ -371,8 +383,10 @@ static struct regulator_init_data goni_ldo11_data = { .min_uV = 2800000, .max_uV = 2800000, .apply_uV = 1, - .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(goni_ldo11_consumers), + .consumer_supplies = goni_ldo11_consumers, }; static struct regulator_init_data goni_ldo12_data = { @@ -391,8 +405,10 @@ static struct regulator_init_data goni_ldo13_data = { .min_uV = 2800000, .max_uV = 2800000, .apply_uV = 1, - .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(goni_ldo13_consumers), + .consumer_supplies = goni_ldo13_consumers, }; static struct regulator_init_data goni_ldo14_data = { @@ -401,8 +417,10 @@ static struct regulator_init_data goni_ldo14_data = { .min_uV = 1800000, .max_uV = 1800000, .apply_uV = 1, - .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(goni_ldo14_consumers), + .consumer_supplies = goni_ldo14_consumers, }; static struct regulator_init_data goni_ldo15_data = { -- cgit v1.2.3-18-g5258 From c472da6da1f38efee6bcfcce30583531262cebe2 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Tue, 15 Feb 2011 14:27:44 +0900 Subject: ARM: S5PV210: Change framebuffer window 0 size on GONI Increase virtual size of the frambuffer window 0 for display panning support. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pv210/mach-goni.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index e06a3c50fff..788599a37a7 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -108,6 +108,8 @@ static struct s3c_fb_pd_win goni_fb_win0 = { }, .max_bpp = 32, .default_bpp = 16, + .virtual_x = 480, + .virtual_y = 2 * 800, }; static struct s3c_fb_platdata goni_lcd_pdata __initdata = { -- cgit v1.2.3-18-g5258 From 7d30e8b3815f804139271dfc31962ab74ce89650 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Mon, 14 Feb 2011 16:33:10 +0900 Subject: ARM: EXYNOS4: Add EXYNOS4 CPU initialization support This patch adds EXYNOS4 CPU support files in mach-exynos4, and basically they are moved from mach-s5pv310 so that it can support Samsung's new CPU name, EXYNOS4. The EXYNOS4 ingegrates a ARM Cortex A9 multi-core. Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos4/cpu.c | 203 ++++++++ arch/arm/mach-exynos4/cpufreq.c | 580 +++++++++++++++++++++++ arch/arm/mach-exynos4/dma.c | 172 +++++++ arch/arm/mach-exynos4/gpiolib.c | 304 ++++++++++++ arch/arm/mach-exynos4/headsmp.S | 41 ++ arch/arm/mach-exynos4/hotplug.c | 130 +++++ arch/arm/mach-exynos4/include/mach/debug-macro.S | 35 ++ arch/arm/mach-exynos4/include/mach/dma.h | 26 + arch/arm/mach-exynos4/include/mach/entry-macro.S | 84 ++++ arch/arm/mach-exynos4/include/mach/gpio.h | 135 ++++++ arch/arm/mach-exynos4/include/mach/hardware.h | 18 + arch/arm/mach-exynos4/include/mach/io.h | 26 + arch/arm/mach-exynos4/include/mach/map.h | 144 ++++++ arch/arm/mach-exynos4/include/mach/memory.h | 22 + arch/arm/mach-exynos4/include/mach/regs-gpio.h | 42 ++ arch/arm/mach-exynos4/include/mach/regs-mem.h | 23 + arch/arm/mach-exynos4/include/mach/regs-pmu.h | 30 ++ arch/arm/mach-exynos4/include/mach/regs-sysmmu.h | 24 + arch/arm/mach-exynos4/include/mach/smp.h | 19 + arch/arm/mach-exynos4/include/mach/sysmmu.h | 122 +++++ arch/arm/mach-exynos4/include/mach/system.h | 22 + arch/arm/mach-exynos4/include/mach/timex.h | 29 ++ arch/arm/mach-exynos4/include/mach/uncompress.h | 30 ++ arch/arm/mach-exynos4/include/mach/vmalloc.h | 22 + arch/arm/mach-exynos4/init.c | 41 ++ arch/arm/mach-exynos4/platsmp.c | 172 +++++++ arch/arm/mach-exynos4/setup-i2c0.c | 26 + arch/arm/mach-s5pv310/cpu.c | 202 -------- arch/arm/mach-s5pv310/cpufreq.c | 580 ----------------------- arch/arm/mach-s5pv310/dma.c | 168 ------- arch/arm/mach-s5pv310/gpiolib.c | 304 ------------ arch/arm/mach-s5pv310/headsmp.S | 41 -- arch/arm/mach-s5pv310/hotplug.c | 130 ----- arch/arm/mach-s5pv310/include/mach/debug-macro.S | 35 -- arch/arm/mach-s5pv310/include/mach/dma.h | 26 - arch/arm/mach-s5pv310/include/mach/entry-macro.S | 84 ---- arch/arm/mach-s5pv310/include/mach/gpio.h | 135 ------ arch/arm/mach-s5pv310/include/mach/hardware.h | 18 - arch/arm/mach-s5pv310/include/mach/io.h | 26 - arch/arm/mach-s5pv310/include/mach/map.h | 144 ------ arch/arm/mach-s5pv310/include/mach/memory.h | 22 - arch/arm/mach-s5pv310/include/mach/regs-gpio.h | 42 -- arch/arm/mach-s5pv310/include/mach/regs-mem.h | 23 - arch/arm/mach-s5pv310/include/mach/regs-pmu.h | 30 -- arch/arm/mach-s5pv310/include/mach/regs-sysmmu.h | 24 - arch/arm/mach-s5pv310/include/mach/smp.h | 19 - arch/arm/mach-s5pv310/include/mach/sysmmu.h | 122 ----- arch/arm/mach-s5pv310/include/mach/system.h | 22 - arch/arm/mach-s5pv310/include/mach/timex.h | 29 -- arch/arm/mach-s5pv310/include/mach/uncompress.h | 30 -- arch/arm/mach-s5pv310/include/mach/vmalloc.h | 22 - arch/arm/mach-s5pv310/init.c | 41 -- arch/arm/mach-s5pv310/platsmp.c | 172 ------- arch/arm/mach-s5pv310/setup-i2c0.c | 26 - arch/arm/plat-s5p/cpu.c | 25 +- arch/arm/plat-s5p/include/plat/exynos4.h | 34 ++ arch/arm/plat-s5p/include/plat/s5pv310.h | 34 -- 57 files changed, 2570 insertions(+), 2562 deletions(-) create mode 100644 arch/arm/mach-exynos4/cpu.c create mode 100644 arch/arm/mach-exynos4/cpufreq.c create mode 100644 arch/arm/mach-exynos4/dma.c create mode 100644 arch/arm/mach-exynos4/gpiolib.c create mode 100644 arch/arm/mach-exynos4/headsmp.S create mode 100644 arch/arm/mach-exynos4/hotplug.c create mode 100644 arch/arm/mach-exynos4/include/mach/debug-macro.S create mode 100644 arch/arm/mach-exynos4/include/mach/dma.h create mode 100644 arch/arm/mach-exynos4/include/mach/entry-macro.S create mode 100644 arch/arm/mach-exynos4/include/mach/gpio.h create mode 100644 arch/arm/mach-exynos4/include/mach/hardware.h create mode 100644 arch/arm/mach-exynos4/include/mach/io.h create mode 100644 arch/arm/mach-exynos4/include/mach/map.h create mode 100644 arch/arm/mach-exynos4/include/mach/memory.h create mode 100644 arch/arm/mach-exynos4/include/mach/regs-gpio.h create mode 100644 arch/arm/mach-exynos4/include/mach/regs-mem.h create mode 100644 arch/arm/mach-exynos4/include/mach/regs-pmu.h create mode 100644 arch/arm/mach-exynos4/include/mach/regs-sysmmu.h create mode 100644 arch/arm/mach-exynos4/include/mach/smp.h create mode 100644 arch/arm/mach-exynos4/include/mach/sysmmu.h create mode 100644 arch/arm/mach-exynos4/include/mach/system.h create mode 100644 arch/arm/mach-exynos4/include/mach/timex.h create mode 100644 arch/arm/mach-exynos4/include/mach/uncompress.h create mode 100644 arch/arm/mach-exynos4/include/mach/vmalloc.h create mode 100644 arch/arm/mach-exynos4/init.c create mode 100644 arch/arm/mach-exynos4/platsmp.c create mode 100644 arch/arm/mach-exynos4/setup-i2c0.c delete mode 100644 arch/arm/mach-s5pv310/cpu.c delete mode 100644 arch/arm/mach-s5pv310/cpufreq.c delete mode 100644 arch/arm/mach-s5pv310/dma.c delete mode 100644 arch/arm/mach-s5pv310/gpiolib.c delete mode 100644 arch/arm/mach-s5pv310/headsmp.S delete mode 100644 arch/arm/mach-s5pv310/hotplug.c delete mode 100644 arch/arm/mach-s5pv310/include/mach/debug-macro.S delete mode 100644 arch/arm/mach-s5pv310/include/mach/dma.h delete mode 100644 arch/arm/mach-s5pv310/include/mach/entry-macro.S delete mode 100644 arch/arm/mach-s5pv310/include/mach/gpio.h delete mode 100644 arch/arm/mach-s5pv310/include/mach/hardware.h delete mode 100644 arch/arm/mach-s5pv310/include/mach/io.h delete mode 100644 arch/arm/mach-s5pv310/include/mach/map.h delete mode 100644 arch/arm/mach-s5pv310/include/mach/memory.h delete mode 100644 arch/arm/mach-s5pv310/include/mach/regs-gpio.h delete mode 100644 arch/arm/mach-s5pv310/include/mach/regs-mem.h delete mode 100644 arch/arm/mach-s5pv310/include/mach/regs-pmu.h delete mode 100644 arch/arm/mach-s5pv310/include/mach/regs-sysmmu.h delete mode 100644 arch/arm/mach-s5pv310/include/mach/smp.h delete mode 100644 arch/arm/mach-s5pv310/include/mach/sysmmu.h delete mode 100644 arch/arm/mach-s5pv310/include/mach/system.h delete mode 100644 arch/arm/mach-s5pv310/include/mach/timex.h delete mode 100644 arch/arm/mach-s5pv310/include/mach/uncompress.h delete mode 100644 arch/arm/mach-s5pv310/include/mach/vmalloc.h delete mode 100644 arch/arm/mach-s5pv310/init.c delete mode 100644 arch/arm/mach-s5pv310/platsmp.c delete mode 100644 arch/arm/mach-s5pv310/setup-i2c0.c create mode 100644 arch/arm/plat-s5p/include/plat/exynos4.h delete mode 100644 arch/arm/plat-s5p/include/plat/s5pv310.h (limited to 'arch') diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c new file mode 100644 index 00000000000..b0ec6d3d377 --- /dev/null +++ b/arch/arm/mach-exynos4/cpu.c @@ -0,0 +1,203 @@ +/* linux/arch/arm/mach-exynos4/cpu.c + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include + +#include +#include + +#include +#include + +#include +#include +#include +#include + +#include + +extern int combiner_init(unsigned int combiner_nr, void __iomem *base, + unsigned int irq_start); +extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq); + +/* Initial IO mappings */ +static struct map_desc exynos4_iodesc[] __initdata = { + { + .virtual = (unsigned long)S5P_VA_SYSRAM, + .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_CMU, + .pfn = __phys_to_pfn(EXYNOS4_PA_CMU), + .length = SZ_128K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_PMU, + .pfn = __phys_to_pfn(EXYNOS4_PA_PMU), + .length = SZ_64K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_COMBINER_BASE, + .pfn = __phys_to_pfn(EXYNOS4_PA_COMBINER), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_COREPERI_BASE, + .pfn = __phys_to_pfn(EXYNOS4_PA_COREPERI), + .length = SZ_8K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_L2CC, + .pfn = __phys_to_pfn(EXYNOS4_PA_L2CC), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_GPIO1, + .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO1), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_GPIO2, + .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO2), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_GPIO3, + .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO3), + .length = SZ_256, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_DMC0, + .pfn = __phys_to_pfn(EXYNOS4_PA_DMC0), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_UART, + .pfn = __phys_to_pfn(S3C_PA_UART), + .length = SZ_512K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_SROMC, + .pfn = __phys_to_pfn(EXYNOS4_PA_SROMC), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +static void exynos4_idle(void) +{ + if (!need_resched()) + cpu_do_idle(); + + local_irq_enable(); +} + +/* + * exynos4_map_io + * + * register the standard cpu IO areas + */ +void __init exynos4_map_io(void) +{ + iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc)); + + /* initialize device information early */ + exynos4_default_sdhci0(); + exynos4_default_sdhci1(); + exynos4_default_sdhci2(); + exynos4_default_sdhci3(); +} + +void __init exynos4_init_clocks(int xtal) +{ + printk(KERN_DEBUG "%s: initializing clocks\n", __func__); + + s3c24xx_register_baseclocks(xtal); + s5p_register_clocks(xtal); + exynos4_register_clocks(); + exynos4_setup_clocks(); +} + +void __init exynos4_init_irq(void) +{ + int irq; + + gic_init(0, IRQ_LOCALTIMER, S5P_VA_GIC_DIST, S5P_VA_GIC_CPU); + + for (irq = 0; irq < MAX_COMBINER_NR; irq++) { + + /* + * From SPI(0) to SPI(39) and SPI(51), SPI(53) are + * connected to the interrupt combiner. These irqs + * should be initialized to support cascade interrupt. + */ + if ((irq >= 40) && !(irq == 51) && !(irq == 53)) + continue; + + combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq), + COMBINER_IRQ(irq, 0)); + combiner_cascade_irq(irq, IRQ_SPI(irq)); + } + + /* The parameters of s5p_init_irq() are for VIC init. + * Theses parameters should be NULL and 0 because EXYNOS4 + * uses GIC instead of VIC. + */ + s5p_init_irq(NULL, 0); +} + +struct sysdev_class exynos4_sysclass = { + .name = "exynos4-core", +}; + +static struct sys_device exynos4_sysdev = { + .cls = &exynos4_sysclass, +}; + +static int __init exynos4_core_init(void) +{ + return sysdev_class_register(&exynos4_sysclass); +} + +core_initcall(exynos4_core_init); + +#ifdef CONFIG_CACHE_L2X0 +static int __init exynos4_l2x0_cache_init(void) +{ + /* TAG, Data Latency Control: 2cycle */ + __raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL); + __raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL); + + /* L2X0 Prefetch Control */ + __raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL); + + /* L2X0 Power Control */ + __raw_writel(L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN, + S5P_VA_L2CC + L2X0_POWER_CTRL); + + l2x0_init(S5P_VA_L2CC, 0x7C470001, 0xC200ffff); + + return 0; +} + +early_initcall(exynos4_l2x0_cache_init); +#endif + +int __init exynos4_init(void) +{ + printk(KERN_INFO "EXYNOS4: Initializing architecture\n"); + + /* set idle function */ + pm_idle = exynos4_idle; + + return sysdev_register(&exynos4_sysdev); +} diff --git a/arch/arm/mach-exynos4/cpufreq.c b/arch/arm/mach-exynos4/cpufreq.c new file mode 100644 index 00000000000..174f080b500 --- /dev/null +++ b/arch/arm/mach-exynos4/cpufreq.c @@ -0,0 +1,580 @@ +/* linux/arch/arm/mach-exynos4/cpufreq.c + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4 - CPU frequency scaling support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + +static struct clk *cpu_clk; +static struct clk *moutcore; +static struct clk *mout_mpll; +static struct clk *mout_apll; + +#ifdef CONFIG_REGULATOR +static struct regulator *arm_regulator; +static struct regulator *int_regulator; +#endif + +static struct cpufreq_freqs freqs; +static unsigned int memtype; + +enum exynos4_memory_type { + DDR2 = 4, + LPDDR2, + DDR3, +}; + +enum cpufreq_level_index { + L0, L1, L2, L3, CPUFREQ_LEVEL_END, +}; + +static struct cpufreq_frequency_table exynos4_freq_table[] = { + {L0, 1000*1000}, + {L1, 800*1000}, + {L2, 400*1000}, + {L3, 100*1000}, + {0, CPUFREQ_TABLE_END}, +}; + +static unsigned int clkdiv_cpu0[CPUFREQ_LEVEL_END][7] = { + /* + * Clock divider value for following + * { DIVCORE, DIVCOREM0, DIVCOREM1, DIVPERIPH, + * DIVATB, DIVPCLK_DBG, DIVAPLL } + */ + + /* ARM L0: 1000MHz */ + { 0, 3, 7, 3, 3, 0, 1 }, + + /* ARM L1: 800MHz */ + { 0, 3, 7, 3, 3, 0, 1 }, + + /* ARM L2: 400MHz */ + { 0, 1, 3, 1, 3, 0, 1 }, + + /* ARM L3: 100MHz */ + { 0, 0, 1, 0, 3, 1, 1 }, +}; + +static unsigned int clkdiv_cpu1[CPUFREQ_LEVEL_END][2] = { + /* + * Clock divider value for following + * { DIVCOPY, DIVHPM } + */ + + /* ARM L0: 1000MHz */ + { 3, 0 }, + + /* ARM L1: 800MHz */ + { 3, 0 }, + + /* ARM L2: 400MHz */ + { 3, 0 }, + + /* ARM L3: 100MHz */ + { 3, 0 }, +}; + +static unsigned int clkdiv_dmc0[CPUFREQ_LEVEL_END][8] = { + /* + * Clock divider value for following + * { DIVACP, DIVACP_PCLK, DIVDPHY, DIVDMC, DIVDMCD + * DIVDMCP, DIVCOPY2, DIVCORE_TIMERS } + */ + + /* DMC L0: 400MHz */ + { 3, 1, 1, 1, 1, 1, 3, 1 }, + + /* DMC L1: 400MHz */ + { 3, 1, 1, 1, 1, 1, 3, 1 }, + + /* DMC L2: 266.7MHz */ + { 7, 1, 1, 2, 1, 1, 3, 1 }, + + /* DMC L3: 200MHz */ + { 7, 1, 1, 3, 1, 1, 3, 1 }, +}; + +static unsigned int clkdiv_top[CPUFREQ_LEVEL_END][5] = { + /* + * Clock divider value for following + * { DIVACLK200, DIVACLK100, DIVACLK160, DIVACLK133, DIVONENAND } + */ + + /* ACLK200 L0: 200MHz */ + { 3, 7, 4, 5, 1 }, + + /* ACLK200 L1: 200MHz */ + { 3, 7, 4, 5, 1 }, + + /* ACLK200 L2: 160MHz */ + { 4, 7, 5, 7, 1 }, + + /* ACLK200 L3: 133.3MHz */ + { 5, 7, 7, 7, 1 }, +}; + +static unsigned int clkdiv_lr_bus[CPUFREQ_LEVEL_END][2] = { + /* + * Clock divider value for following + * { DIVGDL/R, DIVGPL/R } + */ + + /* ACLK_GDL/R L0: 200MHz */ + { 3, 1 }, + + /* ACLK_GDL/R L1: 200MHz */ + { 3, 1 }, + + /* ACLK_GDL/R L2: 160MHz */ + { 4, 1 }, + + /* ACLK_GDL/R L3: 133.3MHz */ + { 5, 1 }, +}; + +struct cpufreq_voltage_table { + unsigned int index; /* any */ + unsigned int arm_volt; /* uV */ + unsigned int int_volt; +}; + +static struct cpufreq_voltage_table exynos4_volt_table[CPUFREQ_LEVEL_END] = { + { + .index = L0, + .arm_volt = 1200000, + .int_volt = 1100000, + }, { + .index = L1, + .arm_volt = 1100000, + .int_volt = 1100000, + }, { + .index = L2, + .arm_volt = 1000000, + .int_volt = 1000000, + }, { + .index = L3, + .arm_volt = 900000, + .int_volt = 1000000, + }, +}; + +static unsigned int exynos4_apll_pms_table[CPUFREQ_LEVEL_END] = { + /* APLL FOUT L0: 1000MHz */ + ((250 << 16) | (6 << 8) | 1), + + /* APLL FOUT L1: 800MHz */ + ((200 << 16) | (6 << 8) | 1), + + /* APLL FOUT L2 : 400MHz */ + ((200 << 16) | (6 << 8) | 2), + + /* APLL FOUT L3: 100MHz */ + ((200 << 16) | (6 << 8) | 4), +}; + +int exynos4_verify_speed(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, exynos4_freq_table); +} + +unsigned int exynos4_getspeed(unsigned int cpu) +{ + return clk_get_rate(cpu_clk) / 1000; +} + +void exynos4_set_clkdiv(unsigned int div_index) +{ + unsigned int tmp; + + /* Change Divider - CPU0 */ + + tmp = __raw_readl(S5P_CLKDIV_CPU); + + tmp &= ~(S5P_CLKDIV_CPU0_CORE_MASK | S5P_CLKDIV_CPU0_COREM0_MASK | + S5P_CLKDIV_CPU0_COREM1_MASK | S5P_CLKDIV_CPU0_PERIPH_MASK | + S5P_CLKDIV_CPU0_ATB_MASK | S5P_CLKDIV_CPU0_PCLKDBG_MASK | + S5P_CLKDIV_CPU0_APLL_MASK); + + tmp |= ((clkdiv_cpu0[div_index][0] << S5P_CLKDIV_CPU0_CORE_SHIFT) | + (clkdiv_cpu0[div_index][1] << S5P_CLKDIV_CPU0_COREM0_SHIFT) | + (clkdiv_cpu0[div_index][2] << S5P_CLKDIV_CPU0_COREM1_SHIFT) | + (clkdiv_cpu0[div_index][3] << S5P_CLKDIV_CPU0_PERIPH_SHIFT) | + (clkdiv_cpu0[div_index][4] << S5P_CLKDIV_CPU0_ATB_SHIFT) | + (clkdiv_cpu0[div_index][5] << S5P_CLKDIV_CPU0_PCLKDBG_SHIFT) | + (clkdiv_cpu0[div_index][6] << S5P_CLKDIV_CPU0_APLL_SHIFT)); + + __raw_writel(tmp, S5P_CLKDIV_CPU); + + do { + tmp = __raw_readl(S5P_CLKDIV_STATCPU); + } while (tmp & 0x1111111); + + /* Change Divider - CPU1 */ + + tmp = __raw_readl(S5P_CLKDIV_CPU1); + + tmp &= ~((0x7 << 4) | 0x7); + + tmp |= ((clkdiv_cpu1[div_index][0] << 4) | + (clkdiv_cpu1[div_index][1] << 0)); + + __raw_writel(tmp, S5P_CLKDIV_CPU1); + + do { + tmp = __raw_readl(S5P_CLKDIV_STATCPU1); + } while (tmp & 0x11); + + /* Change Divider - DMC0 */ + + tmp = __raw_readl(S5P_CLKDIV_DMC0); + + tmp &= ~(S5P_CLKDIV_DMC0_ACP_MASK | S5P_CLKDIV_DMC0_ACPPCLK_MASK | + S5P_CLKDIV_DMC0_DPHY_MASK | S5P_CLKDIV_DMC0_DMC_MASK | + S5P_CLKDIV_DMC0_DMCD_MASK | S5P_CLKDIV_DMC0_DMCP_MASK | + S5P_CLKDIV_DMC0_COPY2_MASK | S5P_CLKDIV_DMC0_CORETI_MASK); + + tmp |= ((clkdiv_dmc0[div_index][0] << S5P_CLKDIV_DMC0_ACP_SHIFT) | + (clkdiv_dmc0[div_index][1] << S5P_CLKDIV_DMC0_ACPPCLK_SHIFT) | + (clkdiv_dmc0[div_index][2] << S5P_CLKDIV_DMC0_DPHY_SHIFT) | + (clkdiv_dmc0[div_index][3] << S5P_CLKDIV_DMC0_DMC_SHIFT) | + (clkdiv_dmc0[div_index][4] << S5P_CLKDIV_DMC0_DMCD_SHIFT) | + (clkdiv_dmc0[div_index][5] << S5P_CLKDIV_DMC0_DMCP_SHIFT) | + (clkdiv_dmc0[div_index][6] << S5P_CLKDIV_DMC0_COPY2_SHIFT) | + (clkdiv_dmc0[div_index][7] << S5P_CLKDIV_DMC0_CORETI_SHIFT)); + + __raw_writel(tmp, S5P_CLKDIV_DMC0); + + do { + tmp = __raw_readl(S5P_CLKDIV_STAT_DMC0); + } while (tmp & 0x11111111); + + /* Change Divider - TOP */ + + tmp = __raw_readl(S5P_CLKDIV_TOP); + + tmp &= ~(S5P_CLKDIV_TOP_ACLK200_MASK | S5P_CLKDIV_TOP_ACLK100_MASK | + S5P_CLKDIV_TOP_ACLK160_MASK | S5P_CLKDIV_TOP_ACLK133_MASK | + S5P_CLKDIV_TOP_ONENAND_MASK); + + tmp |= ((clkdiv_top[div_index][0] << S5P_CLKDIV_TOP_ACLK200_SHIFT) | + (clkdiv_top[div_index][1] << S5P_CLKDIV_TOP_ACLK100_SHIFT) | + (clkdiv_top[div_index][2] << S5P_CLKDIV_TOP_ACLK160_SHIFT) | + (clkdiv_top[div_index][3] << S5P_CLKDIV_TOP_ACLK133_SHIFT) | + (clkdiv_top[div_index][4] << S5P_CLKDIV_TOP_ONENAND_SHIFT)); + + __raw_writel(tmp, S5P_CLKDIV_TOP); + + do { + tmp = __raw_readl(S5P_CLKDIV_STAT_TOP); + } while (tmp & 0x11111); + + /* Change Divider - LEFTBUS */ + + tmp = __raw_readl(S5P_CLKDIV_LEFTBUS); + + tmp &= ~(S5P_CLKDIV_BUS_GDLR_MASK | S5P_CLKDIV_BUS_GPLR_MASK); + + tmp |= ((clkdiv_lr_bus[div_index][0] << S5P_CLKDIV_BUS_GDLR_SHIFT) | + (clkdiv_lr_bus[div_index][1] << S5P_CLKDIV_BUS_GPLR_SHIFT)); + + __raw_writel(tmp, S5P_CLKDIV_LEFTBUS); + + do { + tmp = __raw_readl(S5P_CLKDIV_STAT_LEFTBUS); + } while (tmp & 0x11); + + /* Change Divider - RIGHTBUS */ + + tmp = __raw_readl(S5P_CLKDIV_RIGHTBUS); + + tmp &= ~(S5P_CLKDIV_BUS_GDLR_MASK | S5P_CLKDIV_BUS_GPLR_MASK); + + tmp |= ((clkdiv_lr_bus[div_index][0] << S5P_CLKDIV_BUS_GDLR_SHIFT) | + (clkdiv_lr_bus[div_index][1] << S5P_CLKDIV_BUS_GPLR_SHIFT)); + + __raw_writel(tmp, S5P_CLKDIV_RIGHTBUS); + + do { + tmp = __raw_readl(S5P_CLKDIV_STAT_RIGHTBUS); + } while (tmp & 0x11); +} + +static void exynos4_set_apll(unsigned int index) +{ + unsigned int tmp; + + /* 1. MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */ + clk_set_parent(moutcore, mout_mpll); + + do { + tmp = (__raw_readl(S5P_CLKMUX_STATCPU) + >> S5P_CLKSRC_CPU_MUXCORE_SHIFT); + tmp &= 0x7; + } while (tmp != 0x2); + + /* 2. Set APLL Lock time */ + __raw_writel(S5P_APLL_LOCKTIME, S5P_APLL_LOCK); + + /* 3. Change PLL PMS values */ + tmp = __raw_readl(S5P_APLL_CON0); + tmp &= ~((0x3ff << 16) | (0x3f << 8) | (0x7 << 0)); + tmp |= exynos4_apll_pms_table[index]; + __raw_writel(tmp, S5P_APLL_CON0); + + /* 4. wait_lock_time */ + do { + tmp = __raw_readl(S5P_APLL_CON0); + } while (!(tmp & (0x1 << S5P_APLLCON0_LOCKED_SHIFT))); + + /* 5. MUX_CORE_SEL = APLL */ + clk_set_parent(moutcore, mout_apll); + + do { + tmp = __raw_readl(S5P_CLKMUX_STATCPU); + tmp &= S5P_CLKMUX_STATCPU_MUXCORE_MASK; + } while (tmp != (0x1 << S5P_CLKSRC_CPU_MUXCORE_SHIFT)); +} + +static void exynos4_set_frequency(unsigned int old_index, unsigned int new_index) +{ + unsigned int tmp; + + if (old_index > new_index) { + /* The frequency changing to L0 needs to change apll */ + if (freqs.new == exynos4_freq_table[L0].frequency) { + /* 1. Change the system clock divider values */ + exynos4_set_clkdiv(new_index); + + /* 2. Change the apll m,p,s value */ + exynos4_set_apll(new_index); + } else { + /* 1. Change the system clock divider values */ + exynos4_set_clkdiv(new_index); + + /* 2. Change just s value in apll m,p,s value */ + tmp = __raw_readl(S5P_APLL_CON0); + tmp &= ~(0x7 << 0); + tmp |= (exynos4_apll_pms_table[new_index] & 0x7); + __raw_writel(tmp, S5P_APLL_CON0); + } + } + + else if (old_index < new_index) { + /* The frequency changing from L0 needs to change apll */ + if (freqs.old == exynos4_freq_table[L0].frequency) { + /* 1. Change the apll m,p,s value */ + exynos4_set_apll(new_index); + + /* 2. Change the system clock divider values */ + exynos4_set_clkdiv(new_index); + } else { + /* 1. Change just s value in apll m,p,s value */ + tmp = __raw_readl(S5P_APLL_CON0); + tmp &= ~(0x7 << 0); + tmp |= (exynos4_apll_pms_table[new_index] & 0x7); + __raw_writel(tmp, S5P_APLL_CON0); + + /* 2. Change the system clock divider values */ + exynos4_set_clkdiv(new_index); + } + } +} + +static int exynos4_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + unsigned int index, old_index; + unsigned int arm_volt, int_volt; + + freqs.old = exynos4_getspeed(policy->cpu); + + if (cpufreq_frequency_table_target(policy, exynos4_freq_table, + freqs.old, relation, &old_index)) + return -EINVAL; + + if (cpufreq_frequency_table_target(policy, exynos4_freq_table, + target_freq, relation, &index)) + return -EINVAL; + + freqs.new = exynos4_freq_table[index].frequency; + freqs.cpu = policy->cpu; + + if (freqs.new == freqs.old) + return 0; + + /* get the voltage value */ + arm_volt = exynos4_volt_table[index].arm_volt; + int_volt = exynos4_volt_table[index].int_volt; + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + /* control regulator */ + if (freqs.new > freqs.old) { + /* Voltage up */ +#ifdef CONFIG_REGULATOR + regulator_set_voltage(arm_regulator, arm_volt, arm_volt); + regulator_set_voltage(int_regulator, int_volt, int_volt); +#endif + } + + /* Clock Configuration Procedure */ + exynos4_set_frequency(old_index, index); + + /* control regulator */ + if (freqs.new < freqs.old) { + /* Voltage down */ +#ifdef CONFIG_REGULATOR + regulator_set_voltage(arm_regulator, arm_volt, arm_volt); + regulator_set_voltage(int_regulator, int_volt, int_volt); +#endif + } + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + return 0; +} + +#ifdef CONFIG_PM +static int exynos4_cpufreq_suspend(struct cpufreq_policy *policy, + pm_message_t pmsg) +{ + return 0; +} + +static int exynos4_cpufreq_resume(struct cpufreq_policy *policy) +{ + return 0; +} +#endif + +static int exynos4_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + policy->cur = policy->min = policy->max = exynos4_getspeed(policy->cpu); + + cpufreq_frequency_table_get_attr(exynos4_freq_table, policy->cpu); + + /* set the transition latency value */ + policy->cpuinfo.transition_latency = 100000; + + /* + * EXYNOS4 multi-core processors has 2 cores + * that the frequency cannot be set independently. + * Each cpu is bound to the same speed. + * So the affected cpu is all of the cpus. + */ + cpumask_setall(policy->cpus); + + return cpufreq_frequency_table_cpuinfo(policy, exynos4_freq_table); +} + +static struct cpufreq_driver exynos4_driver = { + .flags = CPUFREQ_STICKY, + .verify = exynos4_verify_speed, + .target = exynos4_target, + .get = exynos4_getspeed, + .init = exynos4_cpufreq_cpu_init, + .name = "exynos4_cpufreq", +#ifdef CONFIG_PM + .suspend = exynos4_cpufreq_suspend, + .resume = exynos4_cpufreq_resume, +#endif +}; + +static int __init exynos4_cpufreq_init(void) +{ + cpu_clk = clk_get(NULL, "armclk"); + if (IS_ERR(cpu_clk)) + return PTR_ERR(cpu_clk); + + moutcore = clk_get(NULL, "moutcore"); + if (IS_ERR(moutcore)) + goto out; + + mout_mpll = clk_get(NULL, "mout_mpll"); + if (IS_ERR(mout_mpll)) + goto out; + + mout_apll = clk_get(NULL, "mout_apll"); + if (IS_ERR(mout_apll)) + goto out; + +#ifdef CONFIG_REGULATOR + arm_regulator = regulator_get(NULL, "vdd_arm"); + if (IS_ERR(arm_regulator)) { + printk(KERN_ERR "failed to get resource %s\n", "vdd_arm"); + goto out; + } + + int_regulator = regulator_get(NULL, "vdd_int"); + if (IS_ERR(int_regulator)) { + printk(KERN_ERR "failed to get resource %s\n", "vdd_int"); + goto out; + } +#endif + + /* + * Check DRAM type. + * Because DVFS level is different according to DRAM type. + */ + memtype = __raw_readl(S5P_VA_DMC0 + S5P_DMC0_MEMCON_OFFSET); + memtype = (memtype >> S5P_DMC0_MEMTYPE_SHIFT); + memtype &= S5P_DMC0_MEMTYPE_MASK; + + if ((memtype < DDR2) && (memtype > DDR3)) { + printk(KERN_ERR "%s: wrong memtype= 0x%x\n", __func__, memtype); + goto out; + } else { + printk(KERN_DEBUG "%s: memtype= 0x%x\n", __func__, memtype); + } + + return cpufreq_register_driver(&exynos4_driver); + +out: + if (!IS_ERR(cpu_clk)) + clk_put(cpu_clk); + + if (!IS_ERR(moutcore)) + clk_put(moutcore); + + if (!IS_ERR(mout_mpll)) + clk_put(mout_mpll); + + if (!IS_ERR(mout_apll)) + clk_put(mout_apll); + +#ifdef CONFIG_REGULATOR + if (!IS_ERR(arm_regulator)) + regulator_put(arm_regulator); + + if (!IS_ERR(int_regulator)) + regulator_put(int_regulator); +#endif + + printk(KERN_ERR "%s: failed initialization\n", __func__); + + return -EINVAL; +} +late_initcall(exynos4_cpufreq_init); diff --git a/arch/arm/mach-exynos4/dma.c b/arch/arm/mach-exynos4/dma.c new file mode 100644 index 00000000000..564bb530f33 --- /dev/null +++ b/arch/arm/mach-exynos4/dma.c @@ -0,0 +1,172 @@ +/* linux/arch/arm/mach-exynos4/dma.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Copyright (C) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include + +#include +#include + +#include +#include + +#include + +static u64 dma_dmamask = DMA_BIT_MASK(32); + +static struct resource exynos4_pdma0_resource[] = { + [0] = { + .start = EXYNOS4_PA_PDMA0, + .end = EXYNOS4_PA_PDMA0 + SZ_4K, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_PDMA0, + .end = IRQ_PDMA0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct s3c_pl330_platdata exynos4_pdma0_pdata = { + .peri = { + [0] = DMACH_PCM0_RX, + [1] = DMACH_PCM0_TX, + [2] = DMACH_PCM2_RX, + [3] = DMACH_PCM2_TX, + [4] = DMACH_MSM_REQ0, + [5] = DMACH_MSM_REQ2, + [6] = DMACH_SPI0_RX, + [7] = DMACH_SPI0_TX, + [8] = DMACH_SPI2_RX, + [9] = DMACH_SPI2_TX, + [10] = DMACH_I2S0S_TX, + [11] = DMACH_I2S0_RX, + [12] = DMACH_I2S0_TX, + [13] = DMACH_I2S2_RX, + [14] = DMACH_I2S2_TX, + [15] = DMACH_UART0_RX, + [16] = DMACH_UART0_TX, + [17] = DMACH_UART2_RX, + [18] = DMACH_UART2_TX, + [19] = DMACH_UART4_RX, + [20] = DMACH_UART4_TX, + [21] = DMACH_SLIMBUS0_RX, + [22] = DMACH_SLIMBUS0_TX, + [23] = DMACH_SLIMBUS2_RX, + [24] = DMACH_SLIMBUS2_TX, + [25] = DMACH_SLIMBUS4_RX, + [26] = DMACH_SLIMBUS4_TX, + [27] = DMACH_AC97_MICIN, + [28] = DMACH_AC97_PCMIN, + [29] = DMACH_AC97_PCMOUT, + [30] = DMACH_MAX, + [31] = DMACH_MAX, + }, +}; + +static struct platform_device exynos4_device_pdma0 = { + .name = "s3c-pl330", + .id = 0, + .num_resources = ARRAY_SIZE(exynos4_pdma0_resource), + .resource = exynos4_pdma0_resource, + .dev = { + .dma_mask = &dma_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &exynos4_pdma0_pdata, + }, +}; + +static struct resource exynos4_pdma1_resource[] = { + [0] = { + .start = EXYNOS4_PA_PDMA1, + .end = EXYNOS4_PA_PDMA1 + SZ_4K, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_PDMA1, + .end = IRQ_PDMA1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct s3c_pl330_platdata exynos4_pdma1_pdata = { + .peri = { + [0] = DMACH_PCM0_RX, + [1] = DMACH_PCM0_TX, + [2] = DMACH_PCM1_RX, + [3] = DMACH_PCM1_TX, + [4] = DMACH_MSM_REQ1, + [5] = DMACH_MSM_REQ3, + [6] = DMACH_SPI1_RX, + [7] = DMACH_SPI1_TX, + [8] = DMACH_I2S0S_TX, + [9] = DMACH_I2S0_RX, + [10] = DMACH_I2S0_TX, + [11] = DMACH_I2S1_RX, + [12] = DMACH_I2S1_TX, + [13] = DMACH_UART0_RX, + [14] = DMACH_UART0_TX, + [15] = DMACH_UART1_RX, + [16] = DMACH_UART1_TX, + [17] = DMACH_UART3_RX, + [18] = DMACH_UART3_TX, + [19] = DMACH_SLIMBUS1_RX, + [20] = DMACH_SLIMBUS1_TX, + [21] = DMACH_SLIMBUS3_RX, + [22] = DMACH_SLIMBUS3_TX, + [23] = DMACH_SLIMBUS5_RX, + [24] = DMACH_SLIMBUS5_TX, + [25] = DMACH_SLIMBUS0AUX_RX, + [26] = DMACH_SLIMBUS0AUX_TX, + [27] = DMACH_SPDIF, + [28] = DMACH_MAX, + [29] = DMACH_MAX, + [30] = DMACH_MAX, + [31] = DMACH_MAX, + }, +}; + +static struct platform_device exynos4_device_pdma1 = { + .name = "s3c-pl330", + .id = 1, + .num_resources = ARRAY_SIZE(exynos4_pdma1_resource), + .resource = exynos4_pdma1_resource, + .dev = { + .dma_mask = &dma_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &exynos4_pdma1_pdata, + }, +}; + +static struct platform_device *exynos4_dmacs[] __initdata = { + &exynos4_device_pdma0, + &exynos4_device_pdma1, +}; + +static int __init exynos4_dma_init(void) +{ + platform_add_devices(exynos4_dmacs, ARRAY_SIZE(exynos4_dmacs)); + + return 0; +} +arch_initcall(exynos4_dma_init); diff --git a/arch/arm/mach-exynos4/gpiolib.c b/arch/arm/mach-exynos4/gpiolib.c new file mode 100644 index 00000000000..c46fdc57d94 --- /dev/null +++ b/arch/arm/mach-exynos4/gpiolib.c @@ -0,0 +1,304 @@ +/* linux/arch/arm/mach-exynos4/gpiolib.c + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4 - GPIOlib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include + +#include + +#include +#include +#include + +static struct s3c_gpio_cfg gpio_cfg = { + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +static struct s3c_gpio_cfg gpio_cfg_noint = { + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +/* + * Following are the gpio banks in v310. + * + * The 'config' member when left to NULL, is initialized to the default + * structure gpio_cfg in the init function below. + * + * The 'base' member is also initialized in the init function below. + * Note: The initialization of 'base' member of s3c_gpio_chip structure + * uses the above macro and depends on the banks being listed in order here. + */ +static struct s3c_gpio_chip exynos4_gpio_part1_4bit[] = { + { + .chip = { + .base = EXYNOS4_GPA0(0), + .ngpio = EXYNOS4_GPIO_A0_NR, + .label = "GPA0", + }, + }, { + .chip = { + .base = EXYNOS4_GPA1(0), + .ngpio = EXYNOS4_GPIO_A1_NR, + .label = "GPA1", + }, + }, { + .chip = { + .base = EXYNOS4_GPB(0), + .ngpio = EXYNOS4_GPIO_B_NR, + .label = "GPB", + }, + }, { + .chip = { + .base = EXYNOS4_GPC0(0), + .ngpio = EXYNOS4_GPIO_C0_NR, + .label = "GPC0", + }, + }, { + .chip = { + .base = EXYNOS4_GPC1(0), + .ngpio = EXYNOS4_GPIO_C1_NR, + .label = "GPC1", + }, + }, { + .chip = { + .base = EXYNOS4_GPD0(0), + .ngpio = EXYNOS4_GPIO_D0_NR, + .label = "GPD0", + }, + }, { + .chip = { + .base = EXYNOS4_GPD1(0), + .ngpio = EXYNOS4_GPIO_D1_NR, + .label = "GPD1", + }, + }, { + .chip = { + .base = EXYNOS4_GPE0(0), + .ngpio = EXYNOS4_GPIO_E0_NR, + .label = "GPE0", + }, + }, { + .chip = { + .base = EXYNOS4_GPE1(0), + .ngpio = EXYNOS4_GPIO_E1_NR, + .label = "GPE1", + }, + }, { + .chip = { + .base = EXYNOS4_GPE2(0), + .ngpio = EXYNOS4_GPIO_E2_NR, + .label = "GPE2", + }, + }, { + .chip = { + .base = EXYNOS4_GPE3(0), + .ngpio = EXYNOS4_GPIO_E3_NR, + .label = "GPE3", + }, + }, { + .chip = { + .base = EXYNOS4_GPE4(0), + .ngpio = EXYNOS4_GPIO_E4_NR, + .label = "GPE4", + }, + }, { + .chip = { + .base = EXYNOS4_GPF0(0), + .ngpio = EXYNOS4_GPIO_F0_NR, + .label = "GPF0", + }, + }, { + .chip = { + .base = EXYNOS4_GPF1(0), + .ngpio = EXYNOS4_GPIO_F1_NR, + .label = "GPF1", + }, + }, { + .chip = { + .base = EXYNOS4_GPF2(0), + .ngpio = EXYNOS4_GPIO_F2_NR, + .label = "GPF2", + }, + }, { + .chip = { + .base = EXYNOS4_GPF3(0), + .ngpio = EXYNOS4_GPIO_F3_NR, + .label = "GPF3", + }, + }, +}; + +static struct s3c_gpio_chip exynos4_gpio_part2_4bit[] = { + { + .chip = { + .base = EXYNOS4_GPJ0(0), + .ngpio = EXYNOS4_GPIO_J0_NR, + .label = "GPJ0", + }, + }, { + .chip = { + .base = EXYNOS4_GPJ1(0), + .ngpio = EXYNOS4_GPIO_J1_NR, + .label = "GPJ1", + }, + }, { + .chip = { + .base = EXYNOS4_GPK0(0), + .ngpio = EXYNOS4_GPIO_K0_NR, + .label = "GPK0", + }, + }, { + .chip = { + .base = EXYNOS4_GPK1(0), + .ngpio = EXYNOS4_GPIO_K1_NR, + .label = "GPK1", + }, + }, { + .chip = { + .base = EXYNOS4_GPK2(0), + .ngpio = EXYNOS4_GPIO_K2_NR, + .label = "GPK2", + }, + }, { + .chip = { + .base = EXYNOS4_GPK3(0), + .ngpio = EXYNOS4_GPIO_K3_NR, + .label = "GPK3", + }, + }, { + .chip = { + .base = EXYNOS4_GPL0(0), + .ngpio = EXYNOS4_GPIO_L0_NR, + .label = "GPL0", + }, + }, { + .chip = { + .base = EXYNOS4_GPL1(0), + .ngpio = EXYNOS4_GPIO_L1_NR, + .label = "GPL1", + }, + }, { + .chip = { + .base = EXYNOS4_GPL2(0), + .ngpio = EXYNOS4_GPIO_L2_NR, + .label = "GPL2", + }, + }, { + .base = (S5P_VA_GPIO2 + 0xC00), + .config = &gpio_cfg_noint, + .irq_base = IRQ_EINT(0), + .chip = { + .base = EXYNOS4_GPX0(0), + .ngpio = EXYNOS4_GPIO_X0_NR, + .label = "GPX0", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO2 + 0xC20), + .config = &gpio_cfg_noint, + .irq_base = IRQ_EINT(8), + .chip = { + .base = EXYNOS4_GPX1(0), + .ngpio = EXYNOS4_GPIO_X1_NR, + .label = "GPX1", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO2 + 0xC40), + .config = &gpio_cfg_noint, + .irq_base = IRQ_EINT(16), + .chip = { + .base = EXYNOS4_GPX2(0), + .ngpio = EXYNOS4_GPIO_X2_NR, + .label = "GPX2", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO2 + 0xC60), + .config = &gpio_cfg_noint, + .irq_base = IRQ_EINT(24), + .chip = { + .base = EXYNOS4_GPX3(0), + .ngpio = EXYNOS4_GPIO_X3_NR, + .label = "GPX3", + .to_irq = samsung_gpiolib_to_irq, + }, + }, +}; + +static struct s3c_gpio_chip exynos4_gpio_part3_4bit[] = { + { + .chip = { + .base = EXYNOS4_GPZ(0), + .ngpio = EXYNOS4_GPIO_Z_NR, + .label = "GPZ", + }, + }, +}; + +static __init int exynos4_gpiolib_init(void) +{ + struct s3c_gpio_chip *chip; + int i; + int nr_chips; + + /* GPIO part 1 */ + + chip = exynos4_gpio_part1_4bit; + nr_chips = ARRAY_SIZE(exynos4_gpio_part1_4bit); + + for (i = 0; i < nr_chips; i++, chip++) { + if (chip->config == NULL) + chip->config = &gpio_cfg; + if (chip->base == NULL) + chip->base = S5P_VA_GPIO1 + (i) * 0x20; + } + + samsung_gpiolib_add_4bit_chips(exynos4_gpio_part1_4bit, nr_chips); + + /* GPIO part 2 */ + + chip = exynos4_gpio_part2_4bit; + nr_chips = ARRAY_SIZE(exynos4_gpio_part2_4bit); + + for (i = 0; i < nr_chips; i++, chip++) { + if (chip->config == NULL) + chip->config = &gpio_cfg; + if (chip->base == NULL) + chip->base = S5P_VA_GPIO2 + (i) * 0x20; + } + + samsung_gpiolib_add_4bit_chips(exynos4_gpio_part2_4bit, nr_chips); + + /* GPIO part 3 */ + + chip = exynos4_gpio_part3_4bit; + nr_chips = ARRAY_SIZE(exynos4_gpio_part3_4bit); + + for (i = 0; i < nr_chips; i++, chip++) { + if (chip->config == NULL) + chip->config = &gpio_cfg; + if (chip->base == NULL) + chip->base = S5P_VA_GPIO3 + (i) * 0x20; + } + + samsung_gpiolib_add_4bit_chips(exynos4_gpio_part3_4bit, nr_chips); + + return 0; +} +core_initcall(exynos4_gpiolib_init); diff --git a/arch/arm/mach-exynos4/headsmp.S b/arch/arm/mach-exynos4/headsmp.S new file mode 100644 index 00000000000..6c6cfc50c46 --- /dev/null +++ b/arch/arm/mach-exynos4/headsmp.S @@ -0,0 +1,41 @@ +/* + * linux/arch/arm/mach-exynos4/headsmp.S + * + * Cloned from linux/arch/arm/mach-realview/headsmp.S + * + * Copyright (c) 2003 ARM Limited + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include + + __INIT + +/* + * exynos4 specific entry point for secondary CPUs. This provides + * a "holding pen" into which all secondary cores are held until we're + * ready for them to initialise. + */ +ENTRY(exynos4_secondary_startup) + mrc p15, 0, r0, c0, c0, 5 + and r0, r0, #15 + adr r4, 1f + ldmia r4, {r5, r6} + sub r4, r4, r5 + add r6, r6, r4 +pen: ldr r7, [r6] + cmp r7, r0 + bne pen + + /* + * we've been released from the holding pen: secondary_stack + * should now contain the SVC stack for this core + */ + b secondary_startup + +1: .long . + .long pen_release diff --git a/arch/arm/mach-exynos4/hotplug.c b/arch/arm/mach-exynos4/hotplug.c new file mode 100644 index 00000000000..4c42f9ce1c5 --- /dev/null +++ b/arch/arm/mach-exynos4/hotplug.c @@ -0,0 +1,130 @@ +/* linux arch/arm/mach-exynos4/hotplug.c + * + * Cloned from linux/arch/arm/mach-realview/hotplug.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include + +#include + +extern volatile int pen_release; + +static inline void cpu_enter_lowpower(void) +{ + unsigned int v; + + flush_cache_all(); + asm volatile( + " mcr p15, 0, %1, c7, c5, 0\n" + " mcr p15, 0, %1, c7, c10, 4\n" + /* + * Turn off coherency + */ + " mrc p15, 0, %0, c1, c0, 1\n" + " bic %0, %0, #0x20\n" + " mcr p15, 0, %0, c1, c0, 1\n" + " mrc p15, 0, %0, c1, c0, 0\n" + " bic %0, %0, %2\n" + " mcr p15, 0, %0, c1, c0, 0\n" + : "=&r" (v) + : "r" (0), "Ir" (CR_C) + : "cc"); +} + +static inline void cpu_leave_lowpower(void) +{ + unsigned int v; + + asm volatile( + "mrc p15, 0, %0, c1, c0, 0\n" + " orr %0, %0, %1\n" + " mcr p15, 0, %0, c1, c0, 0\n" + " mrc p15, 0, %0, c1, c0, 1\n" + " orr %0, %0, #0x20\n" + " mcr p15, 0, %0, c1, c0, 1\n" + : "=&r" (v) + : "Ir" (CR_C) + : "cc"); +} + +static inline void platform_do_lowpower(unsigned int cpu, int *spurious) +{ + /* + * there is no power-control hardware on this platform, so all + * we can do is put the core into WFI; this is safe as the calling + * code will have already disabled interrupts + */ + for (;;) { + /* + * here's the WFI + */ + asm(".word 0xe320f003\n" + : + : + : "memory", "cc"); + + if (pen_release == cpu) { + /* + * OK, proper wakeup, we're done + */ + break; + } + + /* + * Getting here, means that we have come out of WFI without + * having been woken up - this shouldn't happen + * + * Just note it happening - when we're woken, we can report + * its occurrence. + */ + (*spurious)++; + } +} + +int platform_cpu_kill(unsigned int cpu) +{ + return 1; +} + +/* + * platform-specific code to shutdown a CPU + * + * Called with IRQs disabled + */ +void platform_cpu_die(unsigned int cpu) +{ + int spurious = 0; + + /* + * we're ready for shutdown now, so do it + */ + cpu_enter_lowpower(); + platform_do_lowpower(cpu, &spurious); + + /* + * bring this CPU back into the world of cache + * coherency, and then restore interrupts + */ + cpu_leave_lowpower(); + + if (spurious) + pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious); +} + +int platform_cpu_disable(unsigned int cpu) +{ + /* + * we don't allow CPU 0 to be shutdown (it is still too special + * e.g. clock tick interrupts) + */ + return cpu == 0 ? -EPERM : 0; +} diff --git a/arch/arm/mach-exynos4/include/mach/debug-macro.S b/arch/arm/mach-exynos4/include/mach/debug-macro.S new file mode 100644 index 00000000000..58bbd049a6c --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/debug-macro.S @@ -0,0 +1,35 @@ +/* linux/arch/arm/mach-exynos4/include/mach/debug-macro.S + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* pull in the relevant register and map files. */ + +#include + + /* note, for the boot process to work we have to keep the UART + * virtual address aligned to an 1MiB boundary for the L1 + * mapping the head code makes. We keep the UART virtual address + * aligned and add in the offset when we load the value here. + */ + + .macro addruart, rp, rv + ldreq \rp, = S3C_PA_UART + ldrne \rv, = S3C_VA_UART +#if CONFIG_DEBUG_S3C_UART != 0 + add \rp, \rp, #(0x10000 * CONFIG_DEBUG_S3C_UART) + add \rv, \rv, #(0x10000 * CONFIG_DEBUG_S3C_UART) +#endif + .endm + +#define fifo_full fifo_full_s5pv210 +#define fifo_level fifo_level_s5pv210 + +#include diff --git a/arch/arm/mach-exynos4/include/mach/dma.h b/arch/arm/mach-exynos4/include/mach/dma.h new file mode 100644 index 00000000000..81209eb1409 --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/dma.h @@ -0,0 +1,26 @@ +/* + * Copyright (C) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __MACH_DMA_H +#define __MACH_DMA_H + +/* This platform uses the common S3C DMA API driver for PL330 */ +#include + +#endif /* __MACH_DMA_H */ diff --git a/arch/arm/mach-exynos4/include/mach/entry-macro.S b/arch/arm/mach-exynos4/include/mach/entry-macro.S new file mode 100644 index 00000000000..d8f38c2e565 --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/entry-macro.S @@ -0,0 +1,84 @@ +/* arch/arm/mach-exynos4/include/mach/entry-macro.S + * + * Cloned from arch/arm/mach-realview/include/mach/entry-macro.S + * + * Low-level IRQ helper macros for EXYNOS4 platforms + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. +*/ + +#include +#include + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + ldr \base, =gic_cpu_base_addr + ldr \base, [\base] + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + /* + * The interrupt numbering scheme is defined in the + * interrupt controller spec. To wit: + * + * Interrupts 0-15 are IPI + * 16-28 are reserved + * 29-31 are local. We allow 30 to be used for the watchdog. + * 32-1020 are global + * 1021-1022 are reserved + * 1023 is "spurious" (no interrupt) + * + * For now, we ignore all local interrupts so only return an interrupt if it's + * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs. + * + * A simple read from the controller will tell us the number of the highest + * priority enabled interrupt. We then just need to check whether it is in the + * valid range for an IRQ (30-1020 inclusive). + */ + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + + ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */ + + ldr \tmp, =1021 + + bic \irqnr, \irqstat, #0x1c00 + + cmp \irqnr, #29 + cmpcc \irqnr, \irqnr + cmpne \irqnr, \tmp + cmpcs \irqnr, \irqnr + addne \irqnr, \irqnr, #32 + + .endm + + /* We assume that irqstat (the raw value of the IRQ acknowledge + * register) is preserved from the macro above. + * If there is an IPI, we immediately signal end of interrupt on the + * controller, since this requires the original irqstat value which + * we won't easily be able to recreate later. + */ + + .macro test_for_ipi, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + cmp \irqnr, #16 + strcc \irqstat, [\base, #GIC_CPU_EOI] + cmpcs \irqnr, \irqnr + .endm + + /* As above, this assumes that irqstat and base are preserved.. */ + + .macro test_for_ltirq, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + mov \tmp, #0 + cmp \irqnr, #29 + moveq \tmp, #1 + streq \irqstat, [\base, #GIC_CPU_EOI] + cmp \tmp, #0 + .endm diff --git a/arch/arm/mach-exynos4/include/mach/gpio.h b/arch/arm/mach-exynos4/include/mach/gpio.h new file mode 100644 index 00000000000..16082998bcd --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/gpio.h @@ -0,0 +1,135 @@ +/* linux/arch/arm/mach-exynos4/include/mach/gpio.h + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4 - GPIO lib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_GPIO_H +#define __ASM_ARCH_GPIO_H __FILE__ + +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep +#define gpio_to_irq __gpio_to_irq + +/* Practically, GPIO banks upto GPZ are the configurable gpio banks */ + +/* GPIO bank sizes */ +#define EXYNOS4_GPIO_A0_NR (8) +#define EXYNOS4_GPIO_A1_NR (6) +#define EXYNOS4_GPIO_B_NR (8) +#define EXYNOS4_GPIO_C0_NR (5) +#define EXYNOS4_GPIO_C1_NR (5) +#define EXYNOS4_GPIO_D0_NR (4) +#define EXYNOS4_GPIO_D1_NR (4) +#define EXYNOS4_GPIO_E0_NR (5) +#define EXYNOS4_GPIO_E1_NR (8) +#define EXYNOS4_GPIO_E2_NR (6) +#define EXYNOS4_GPIO_E3_NR (8) +#define EXYNOS4_GPIO_E4_NR (8) +#define EXYNOS4_GPIO_F0_NR (8) +#define EXYNOS4_GPIO_F1_NR (8) +#define EXYNOS4_GPIO_F2_NR (8) +#define EXYNOS4_GPIO_F3_NR (6) +#define EXYNOS4_GPIO_J0_NR (8) +#define EXYNOS4_GPIO_J1_NR (5) +#define EXYNOS4_GPIO_K0_NR (7) +#define EXYNOS4_GPIO_K1_NR (7) +#define EXYNOS4_GPIO_K2_NR (7) +#define EXYNOS4_GPIO_K3_NR (7) +#define EXYNOS4_GPIO_L0_NR (8) +#define EXYNOS4_GPIO_L1_NR (3) +#define EXYNOS4_GPIO_L2_NR (8) +#define EXYNOS4_GPIO_X0_NR (8) +#define EXYNOS4_GPIO_X1_NR (8) +#define EXYNOS4_GPIO_X2_NR (8) +#define EXYNOS4_GPIO_X3_NR (8) +#define EXYNOS4_GPIO_Z_NR (7) + +/* GPIO bank numbers */ + +#define EXYNOS4_GPIO_NEXT(__gpio) \ + ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) + +enum s5p_gpio_number { + EXYNOS4_GPIO_A0_START = 0, + EXYNOS4_GPIO_A1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_A0), + EXYNOS4_GPIO_B_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_A1), + EXYNOS4_GPIO_C0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_B), + EXYNOS4_GPIO_C1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_C0), + EXYNOS4_GPIO_D0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_C1), + EXYNOS4_GPIO_D1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_D0), + EXYNOS4_GPIO_E0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_D1), + EXYNOS4_GPIO_E1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E0), + EXYNOS4_GPIO_E2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E1), + EXYNOS4_GPIO_E3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E2), + EXYNOS4_GPIO_E4_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E3), + EXYNOS4_GPIO_F0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E4), + EXYNOS4_GPIO_F1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F0), + EXYNOS4_GPIO_F2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F1), + EXYNOS4_GPIO_F3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F2), + EXYNOS4_GPIO_J0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F3), + EXYNOS4_GPIO_J1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_J0), + EXYNOS4_GPIO_K0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_J1), + EXYNOS4_GPIO_K1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K0), + EXYNOS4_GPIO_K2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K1), + EXYNOS4_GPIO_K3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K2), + EXYNOS4_GPIO_L0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K3), + EXYNOS4_GPIO_L1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_L0), + EXYNOS4_GPIO_L2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_L1), + EXYNOS4_GPIO_X0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_L2), + EXYNOS4_GPIO_X1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X0), + EXYNOS4_GPIO_X2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X1), + EXYNOS4_GPIO_X3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X2), + EXYNOS4_GPIO_Z_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X3), +}; + +/* EXYNOS4 GPIO number definitions */ +#define EXYNOS4_GPA0(_nr) (EXYNOS4_GPIO_A0_START + (_nr)) +#define EXYNOS4_GPA1(_nr) (EXYNOS4_GPIO_A1_START + (_nr)) +#define EXYNOS4_GPB(_nr) (EXYNOS4_GPIO_B_START + (_nr)) +#define EXYNOS4_GPC0(_nr) (EXYNOS4_GPIO_C0_START + (_nr)) +#define EXYNOS4_GPC1(_nr) (EXYNOS4_GPIO_C1_START + (_nr)) +#define EXYNOS4_GPD0(_nr) (EXYNOS4_GPIO_D0_START + (_nr)) +#define EXYNOS4_GPD1(_nr) (EXYNOS4_GPIO_D1_START + (_nr)) +#define EXYNOS4_GPE0(_nr) (EXYNOS4_GPIO_E0_START + (_nr)) +#define EXYNOS4_GPE1(_nr) (EXYNOS4_GPIO_E1_START + (_nr)) +#define EXYNOS4_GPE2(_nr) (EXYNOS4_GPIO_E2_START + (_nr)) +#define EXYNOS4_GPE3(_nr) (EXYNOS4_GPIO_E3_START + (_nr)) +#define EXYNOS4_GPE4(_nr) (EXYNOS4_GPIO_E4_START + (_nr)) +#define EXYNOS4_GPF0(_nr) (EXYNOS4_GPIO_F0_START + (_nr)) +#define EXYNOS4_GPF1(_nr) (EXYNOS4_GPIO_F1_START + (_nr)) +#define EXYNOS4_GPF2(_nr) (EXYNOS4_GPIO_F2_START + (_nr)) +#define EXYNOS4_GPF3(_nr) (EXYNOS4_GPIO_F3_START + (_nr)) +#define EXYNOS4_GPJ0(_nr) (EXYNOS4_GPIO_J0_START + (_nr)) +#define EXYNOS4_GPJ1(_nr) (EXYNOS4_GPIO_J1_START + (_nr)) +#define EXYNOS4_GPK0(_nr) (EXYNOS4_GPIO_K0_START + (_nr)) +#define EXYNOS4_GPK1(_nr) (EXYNOS4_GPIO_K1_START + (_nr)) +#define EXYNOS4_GPK2(_nr) (EXYNOS4_GPIO_K2_START + (_nr)) +#define EXYNOS4_GPK3(_nr) (EXYNOS4_GPIO_K3_START + (_nr)) +#define EXYNOS4_GPL0(_nr) (EXYNOS4_GPIO_L0_START + (_nr)) +#define EXYNOS4_GPL1(_nr) (EXYNOS4_GPIO_L1_START + (_nr)) +#define EXYNOS4_GPL2(_nr) (EXYNOS4_GPIO_L2_START + (_nr)) +#define EXYNOS4_GPX0(_nr) (EXYNOS4_GPIO_X0_START + (_nr)) +#define EXYNOS4_GPX1(_nr) (EXYNOS4_GPIO_X1_START + (_nr)) +#define EXYNOS4_GPX2(_nr) (EXYNOS4_GPIO_X2_START + (_nr)) +#define EXYNOS4_GPX3(_nr) (EXYNOS4_GPIO_X3_START + (_nr)) +#define EXYNOS4_GPZ(_nr) (EXYNOS4_GPIO_Z_START + (_nr)) + +/* the end of the EXYNOS4 specific gpios */ +#define EXYNOS4_GPIO_END (EXYNOS4_GPZ(EXYNOS4_GPIO_Z_NR) + 1) +#define S3C_GPIO_END EXYNOS4_GPIO_END + +/* define the number of gpios we need to the one after the GPZ() range */ +#define ARCH_NR_GPIOS (EXYNOS4_GPZ(EXYNOS4_GPIO_Z_NR) + \ + CONFIG_SAMSUNG_GPIO_EXTRA + 1) + +#include + +#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-exynos4/include/mach/hardware.h b/arch/arm/mach-exynos4/include/mach/hardware.h new file mode 100644 index 00000000000..5109eb232f2 --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/hardware.h @@ -0,0 +1,18 @@ +/* linux/arch/arm/mach-exynos4/include/mach/hardware.h + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4 - Hardware support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H __FILE__ + +/* currently nothing here, placeholder */ + +#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-exynos4/include/mach/io.h b/arch/arm/mach-exynos4/include/mach/io.h new file mode 100644 index 00000000000..d5478d24753 --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/io.h @@ -0,0 +1,26 @@ +/* linux/arch/arm/mach-exynos4/include/mach/io.h + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Copyright 2008-2010 Ben Dooks + * + * Based on arch/arm/mach-s5p6442/include/mach/io.h + * + * Default IO routines for EXYNOS4 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H __FILE__ + +/* No current ISA/PCI bus support. */ +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) + +#define IO_SPACE_LIMIT (0xFFFFFFFF) + +#endif /* __ASM_ARM_ARCH_IO_H */ diff --git a/arch/arm/mach-exynos4/include/mach/map.h b/arch/arm/mach-exynos4/include/mach/map.h new file mode 100644 index 00000000000..80a41e03cc1 --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/map.h @@ -0,0 +1,144 @@ +/* linux/arch/arm/mach-exynos4/include/mach/map.h + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * EXYNOS4 - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_MAP_H +#define __ASM_ARCH_MAP_H __FILE__ + +#include + +/* + * EXYNOS4 UART offset is 0x10000 but the older S5P SoCs are 0x400. + * So need to define it, and here is to avoid redefinition warning. + */ +#define S3C_UART_OFFSET (0x10000) + +#include + +#define EXYNOS4_PA_SYSRAM 0x02020000 + +#define EXYNOS4_PA_I2S0 0x03830000 +#define EXYNOS4_PA_I2S1 0xE3100000 +#define EXYNOS4_PA_I2S2 0xE2A00000 + +#define EXYNOS4_PA_PCM0 0x03840000 +#define EXYNOS4_PA_PCM1 0x13980000 +#define EXYNOS4_PA_PCM2 0x13990000 + +#define EXYNOS4_PA_SROM_BANK(x) (0x04000000 + ((x) * 0x01000000)) + +#define EXYNOS4_PA_ONENAND 0x0C000000 +#define EXYNOS4_PA_ONENAND_DMA 0x0C600000 + +#define EXYNOS4_PA_CHIPID 0x10000000 + +#define EXYNOS4_PA_SYSCON 0x10010000 +#define EXYNOS4_PA_PMU 0x10020000 +#define EXYNOS4_PA_CMU 0x10030000 + +#define EXYNOS4_PA_WATCHDOG 0x10060000 +#define EXYNOS4_PA_RTC 0x10070000 + +#define EXYNOS4_PA_DMC0 0x10400000 + +#define EXYNOS4_PA_COMBINER 0x10448000 + +#define EXYNOS4_PA_COREPERI 0x10500000 +#define EXYNOS4_PA_GIC_CPU 0x10500100 +#define EXYNOS4_PA_TWD 0x10500600 +#define EXYNOS4_PA_GIC_DIST 0x10501000 +#define EXYNOS4_PA_L2CC 0x10502000 + +#define EXYNOS4_PA_MDMA 0x10810000 +#define EXYNOS4_PA_PDMA0 0x12680000 +#define EXYNOS4_PA_PDMA1 0x12690000 + +#define EXYNOS4_PA_SYSMMU_MDMA 0x10A40000 +#define EXYNOS4_PA_SYSMMU_SSS 0x10A50000 +#define EXYNOS4_PA_SYSMMU_FIMC0 0x11A20000 +#define EXYNOS4_PA_SYSMMU_FIMC1 0x11A30000 +#define EXYNOS4_PA_SYSMMU_FIMC2 0x11A40000 +#define EXYNOS4_PA_SYSMMU_FIMC3 0x11A50000 +#define EXYNOS4_PA_SYSMMU_JPEG 0x11A60000 +#define EXYNOS4_PA_SYSMMU_FIMD0 0x11E20000 +#define EXYNOS4_PA_SYSMMU_FIMD1 0x12220000 +#define EXYNOS4_PA_SYSMMU_PCIe 0x12620000 +#define EXYNOS4_PA_SYSMMU_G2D 0x12A20000 +#define EXYNOS4_PA_SYSMMU_ROTATOR 0x12A30000 +#define EXYNOS4_PA_SYSMMU_MDMA2 0x12A40000 +#define EXYNOS4_PA_SYSMMU_TV 0x12E20000 +#define EXYNOS4_PA_SYSMMU_MFC_L 0x13620000 +#define EXYNOS4_PA_SYSMMU_MFC_R 0x13630000 + +#define EXYNOS4_PA_GPIO1 0x11400000 +#define EXYNOS4_PA_GPIO2 0x11000000 +#define EXYNOS4_PA_GPIO3 0x03860000 + +#define EXYNOS4_PA_MIPI_CSIS0 0x11880000 +#define EXYNOS4_PA_MIPI_CSIS1 0x11890000 + +#define EXYNOS4_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000)) + +#define EXYNOS4_PA_SROMC 0x12570000 + +#define EXYNOS4_PA_UART 0x13800000 + +#define EXYNOS4_PA_IIC(x) (0x13860000 + ((x) * 0x10000)) + +#define EXYNOS4_PA_AC97 0x139A0000 + +#define EXYNOS4_PA_TIMER 0x139D0000 + +#define EXYNOS4_PA_SDRAM 0x40000000 + +#define EXYNOS4_PA_SPDIF 0xE1100000 + +/* Compatibiltiy Defines */ + +#define S3C_PA_HSMMC0 EXYNOS4_PA_HSMMC(0) +#define S3C_PA_HSMMC1 EXYNOS4_PA_HSMMC(1) +#define S3C_PA_HSMMC2 EXYNOS4_PA_HSMMC(2) +#define S3C_PA_HSMMC3 EXYNOS4_PA_HSMMC(3) +#define S3C_PA_IIC EXYNOS4_PA_IIC(0) +#define S3C_PA_IIC1 EXYNOS4_PA_IIC(1) +#define S3C_PA_IIC2 EXYNOS4_PA_IIC(2) +#define S3C_PA_IIC3 EXYNOS4_PA_IIC(3) +#define S3C_PA_IIC4 EXYNOS4_PA_IIC(4) +#define S3C_PA_IIC5 EXYNOS4_PA_IIC(5) +#define S3C_PA_IIC6 EXYNOS4_PA_IIC(6) +#define S3C_PA_IIC7 EXYNOS4_PA_IIC(7) +#define S3C_PA_RTC EXYNOS4_PA_RTC +#define S3C_PA_WDT EXYNOS4_PA_WATCHDOG + +#define S5P_PA_CHIPID EXYNOS4_PA_CHIPID +#define S5P_PA_MIPI_CSIS0 EXYNOS4_PA_MIPI_CSIS0 +#define S5P_PA_MIPI_CSIS1 EXYNOS4_PA_MIPI_CSIS1 +#define S5P_PA_ONENAND EXYNOS4_PA_ONENAND +#define S5P_PA_ONENAND_DMA EXYNOS4_PA_ONENAND_DMA +#define S5P_PA_SDRAM EXYNOS4_PA_SDRAM +#define S5P_PA_SROMC EXYNOS4_PA_SROMC +#define S5P_PA_SYSCON EXYNOS4_PA_SYSCON +#define S5P_PA_TIMER EXYNOS4_PA_TIMER + +/* UART */ + +#define S3C_PA_UART EXYNOS4_PA_UART + +#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET)) +#define S5P_PA_UART0 S5P_PA_UART(0) +#define S5P_PA_UART1 S5P_PA_UART(1) +#define S5P_PA_UART2 S5P_PA_UART(2) +#define S5P_PA_UART3 S5P_PA_UART(3) +#define S5P_PA_UART4 S5P_PA_UART(4) + +#define S5P_SZ_UART SZ_256 + +#endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-exynos4/include/mach/memory.h b/arch/arm/mach-exynos4/include/mach/memory.h new file mode 100644 index 00000000000..39b47d06f9b --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/memory.h @@ -0,0 +1,22 @@ +/* linux/arch/arm/mach-exynos4/include/mach/memory.h + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4 - Memory definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H __FILE__ + +#define PHYS_OFFSET UL(0x40000000) + +/* Maximum of 256MiB in one bank */ +#define MAX_PHYSMEM_BITS 32 +#define SECTION_SIZE_BITS 28 + +#endif /* __ASM_ARCH_MEMORY_H */ diff --git a/arch/arm/mach-exynos4/include/mach/regs-gpio.h b/arch/arm/mach-exynos4/include/mach/regs-gpio.h new file mode 100644 index 00000000000..1401b21663a --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/regs-gpio.h @@ -0,0 +1,42 @@ +/* linux/arch/arm/mach-exynos4/include/mach/regs-gpio.h + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4 - GPIO (including EINT) register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_GPIO_H +#define __ASM_ARCH_REGS_GPIO_H __FILE__ + +#include +#include + +#define EXYNOS4_EINT40CON (S5P_VA_GPIO2 + 0xE00) +#define S5P_EINT_CON(x) (EXYNOS4_EINT40CON + ((x) * 0x4)) + +#define EXYNOS4_EINT40FLTCON0 (S5P_VA_GPIO2 + 0xE80) +#define S5P_EINT_FLTCON(x) (EXYNOS4_EINT40FLTCON0 + ((x) * 0x4)) + +#define EXYNOS4_EINT40MASK (S5P_VA_GPIO2 + 0xF00) +#define S5P_EINT_MASK(x) (EXYNOS4_EINT40MASK + ((x) * 0x4)) + +#define EXYNOS4_EINT40PEND (S5P_VA_GPIO2 + 0xF40) +#define S5P_EINT_PEND(x) (EXYNOS4_EINT40PEND + ((x) * 0x4)) + +#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3) + +#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7)) + +#define EINT_MODE S3C_GPIO_SFN(0xf) + +#define EINT_GPIO_0(x) EXYNOS4_GPX0(x) +#define EINT_GPIO_1(x) EXYNOS4_GPX1(x) +#define EINT_GPIO_2(x) EXYNOS4_GPX2(x) +#define EINT_GPIO_3(x) EXYNOS4_GPX3(x) + +#endif /* __ASM_ARCH_REGS_GPIO_H */ diff --git a/arch/arm/mach-exynos4/include/mach/regs-mem.h b/arch/arm/mach-exynos4/include/mach/regs-mem.h new file mode 100644 index 00000000000..0368b5a2725 --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/regs-mem.h @@ -0,0 +1,23 @@ +/* linux/arch/arm/mach-exynos4/include/mach/regs-mem.h + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4 - SROMC and DMC register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_MEM_H +#define __ASM_ARCH_REGS_MEM_H __FILE__ + +#include + +#define S5P_DMC0_MEMCON_OFFSET 0x04 + +#define S5P_DMC0_MEMTYPE_SHIFT 8 +#define S5P_DMC0_MEMTYPE_MASK 0xF + +#endif /* __ASM_ARCH_REGS_MEM_H */ diff --git a/arch/arm/mach-exynos4/include/mach/regs-pmu.h b/arch/arm/mach-exynos4/include/mach/regs-pmu.h new file mode 100644 index 00000000000..2ddd6175dfa --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/regs-pmu.h @@ -0,0 +1,30 @@ +/* linux/arch/arm/mach-exynos4/include/mach/regs-pmu.h + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4 - Power management unit definition + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_PMU_H +#define __ASM_ARCH_REGS_PMU_H __FILE__ + +#include + +#define S5P_PMUREG(x) (S5P_VA_PMU + (x)) + +#define S5P_PMU_CAM_CONF S5P_PMUREG(0x3C00) +#define S5P_PMU_TV_CONF S5P_PMUREG(0x3C20) +#define S5P_PMU_MFC_CONF S5P_PMUREG(0x3C40) +#define S5P_PMU_G3D_CONF S5P_PMUREG(0x3C60) +#define S5P_PMU_LCD0_CONF S5P_PMUREG(0x3C80) +#define S5P_PMU_LCD1_CONF S5P_PMUREG(0x3CA0) +#define S5P_PMU_GPS_CONF S5P_PMUREG(0x3CE0) + +#define S5P_INT_LOCAL_PWR_EN 0x7 + +#endif /* __ASM_ARCH_REGS_PMU_H */ diff --git a/arch/arm/mach-exynos4/include/mach/regs-sysmmu.h b/arch/arm/mach-exynos4/include/mach/regs-sysmmu.h new file mode 100644 index 00000000000..b6aef863b9d --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/regs-sysmmu.h @@ -0,0 +1,24 @@ +/* linux/arch/arm/mach-exynos4/include/mach/regs-sysmmu.h + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4 - System MMU register + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_SYSMMU_H +#define __ASM_ARCH_REGS_SYSMMU_H __FILE__ + +#define S5P_MMU_CTRL 0x000 +#define S5P_MMU_CFG 0x004 +#define S5P_MMU_STATUS 0x008 +#define S5P_MMU_FLUSH 0x00C +#define S5P_PT_BASE_ADDR 0x014 +#define S5P_INT_STATUS 0x018 +#define S5P_PAGE_FAULT_ADDR 0x024 + +#endif /* __ASM_ARCH_REGS_SYSMMU_H */ diff --git a/arch/arm/mach-exynos4/include/mach/smp.h b/arch/arm/mach-exynos4/include/mach/smp.h new file mode 100644 index 00000000000..a463dcebcfd --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/smp.h @@ -0,0 +1,19 @@ +/* linux/arch/arm/mach-exynos4/include/mach/smp.h + * + * Cloned from arch/arm/mach-realview/include/mach/smp.h +*/ + +#ifndef ASM_ARCH_SMP_H +#define ASM_ARCH_SMP_H __FILE__ + +#include + +/* + * We use IRQ1 as the IPI + */ +static inline void smp_cross_call(const struct cpumask *mask, int ipi) +{ + gic_raise_softirq(mask, ipi); +} + +#endif diff --git a/arch/arm/mach-exynos4/include/mach/sysmmu.h b/arch/arm/mach-exynos4/include/mach/sysmmu.h new file mode 100644 index 00000000000..1428adad837 --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/sysmmu.h @@ -0,0 +1,122 @@ +/* linux/arch/arm/mach-exynos4/include/mach/sysmmu.h + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung sysmmu driver for EXYNOS4 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARM_ARCH_SYSMMU_H +#define __ASM_ARM_ARCH_SYSMMU_H __FILE__ + +#define EXYNOS4_SYSMMU_TOTAL_IPNUM 16 +#define S5P_SYSMMU_TOTAL_IPNUM EXYNOS4_SYSMMU_TOTAL_IPNUM + +enum exynos4_sysmmu_ips { + SYSMMU_MDMA, + SYSMMU_SSS, + SYSMMU_FIMC0, + SYSMMU_FIMC1, + SYSMMU_FIMC2, + SYSMMU_FIMC3, + SYSMMU_JPEG, + SYSMMU_FIMD0, + SYSMMU_FIMD1, + SYSMMU_PCIe, + SYSMMU_G2D, + SYSMMU_ROTATOR, + SYSMMU_MDMA2, + SYSMMU_TV, + SYSMMU_MFC_L, + SYSMMU_MFC_R, +}; + +static char *sysmmu_ips_name[EXYNOS4_SYSMMU_TOTAL_IPNUM] = { + "SYSMMU_MDMA" , + "SYSMMU_SSS" , + "SYSMMU_FIMC0" , + "SYSMMU_FIMC1" , + "SYSMMU_FIMC2" , + "SYSMMU_FIMC3" , + "SYSMMU_JPEG" , + "SYSMMU_FIMD0" , + "SYSMMU_FIMD1" , + "SYSMMU_PCIe" , + "SYSMMU_G2D" , + "SYSMMU_ROTATOR", + "SYSMMU_MDMA2" , + "SYSMMU_TV" , + "SYSMMU_MFC_L" , + "SYSMMU_MFC_R" , +}; + +typedef enum exynos4_sysmmu_ips sysmmu_ips; + +struct sysmmu_tt_info { + unsigned long *pgd; + unsigned long pgd_paddr; + unsigned long *pte; +}; + +struct sysmmu_controller { + const char *name; + + /* channels registers */ + void __iomem *regs; + + /* channel irq */ + unsigned int irq; + + sysmmu_ips ips; + + /* Translation Table Info. */ + struct sysmmu_tt_info *tt_info; + + struct resource *mem; + struct device *dev; + + /* SysMMU controller enable - true : enable */ + bool enable; +}; + +/** + * s5p_sysmmu_enable() - enable system mmu of ip + * @ips: The ip connected system mmu. + * + * This function enable system mmu to transfer address + * from virtual address to physical address + */ +int s5p_sysmmu_enable(sysmmu_ips ips); + +/** + * s5p_sysmmu_disable() - disable sysmmu mmu of ip + * @ips: The ip connected system mmu. + * + * This function disable system mmu to transfer address + * from virtual address to physical address + */ +int s5p_sysmmu_disable(sysmmu_ips ips); + +/** + * s5p_sysmmu_set_tablebase_pgd() - set page table base address to refer page table + * @ips: The ip connected system mmu. + * @pgd: The page table base address. + * + * This function set page table base address + * When system mmu transfer address from virtaul address to physical address, + * system mmu refer address information from page table + */ +int s5p_sysmmu_set_tablebase_pgd(sysmmu_ips ips, unsigned long pgd); + +/** + * s5p_sysmmu_tlb_invalidate() - flush all TLB entry in system mmu + * @ips: The ip connected system mmu. + * + * This function flush all TLB entry in system mmu + */ +int s5p_sysmmu_tlb_invalidate(sysmmu_ips ips); +#endif /* __ASM_ARM_ARCH_SYSMMU_H */ diff --git a/arch/arm/mach-exynos4/include/mach/system.h b/arch/arm/mach-exynos4/include/mach/system.h new file mode 100644 index 00000000000..5e3220c18fc --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/system.h @@ -0,0 +1,22 @@ +/* linux/arch/arm/mach-exynos4/include/mach/system.h + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4 - system support header + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H __FILE__ + +#include + +static void arch_idle(void) +{ + /* nothing here yet */ +} +#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/arch/arm/mach-exynos4/include/mach/timex.h b/arch/arm/mach-exynos4/include/mach/timex.h new file mode 100644 index 00000000000..6d138750a70 --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/timex.h @@ -0,0 +1,29 @@ +/* linux/arch/arm/mach-exynos4/include/mach/timex.h + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Copyright (c) 2003-2010 Simtec Electronics + * Ben Dooks + * + * Based on arch/arm/mach-s5p6442/include/mach/timex.h + * + * EXYNOS4 - time parameters + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_TIMEX_H +#define __ASM_ARCH_TIMEX_H __FILE__ + +/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it + * a variable is useless. It seems as long as we make our timers an + * exact multiple of HZ, any value that makes a 1->1 correspondence + * for the time conversion functions to/from jiffies is acceptable. +*/ + +#define CLOCK_TICK_RATE 12000000 + +#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-exynos4/include/mach/uncompress.h b/arch/arm/mach-exynos4/include/mach/uncompress.h new file mode 100644 index 00000000000..21d97bcd9ac --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/uncompress.h @@ -0,0 +1,30 @@ +/* linux/arch/arm/mach-exynos4/include/mach/uncompress.h + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4 - uncompress code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_UNCOMPRESS_H +#define __ASM_ARCH_UNCOMPRESS_H __FILE__ + +#include +#include + +static void arch_detect_cpu(void) +{ + /* we do not need to do any cpu detection here at the moment. */ + + /* + * For preventing FIFO overrun or infinite loop of UART console, + * fifo_max should be the minimum fifo size of all of the UART channels + */ + fifo_mask = S5PV210_UFSTAT_TXMASK; + fifo_max = 15 << S5PV210_UFSTAT_TXSHIFT; +} +#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-exynos4/include/mach/vmalloc.h b/arch/arm/mach-exynos4/include/mach/vmalloc.h new file mode 100644 index 00000000000..284330e571d --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/vmalloc.h @@ -0,0 +1,22 @@ +/* linux/arch/arm/mach-exynos4/include/mach/vmalloc.h + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Copyright 2010 Ben Dooks + * + * Based on arch/arm/mach-s5p6440/include/mach/vmalloc.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * EXYNOS4 vmalloc definition +*/ + +#ifndef __ASM_ARCH_VMALLOC_H +#define __ASM_ARCH_VMALLOC_H __FILE__ + +#define VMALLOC_END 0xF6000000UL + +#endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-exynos4/init.c b/arch/arm/mach-exynos4/init.c new file mode 100644 index 00000000000..cf91f50e43a --- /dev/null +++ b/arch/arm/mach-exynos4/init.c @@ -0,0 +1,41 @@ +/* linux/arch/arm/mach-exynos4/init.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include + +#include +#include +#include + +static struct s3c24xx_uart_clksrc exynos4_serial_clocks[] = { + [0] = { + .name = "uclk1", + .divisor = 1, + .min_baud = 0, + .max_baud = 0, + }, +}; + +/* uart registration process */ +void __init exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + struct s3c2410_uartcfg *tcfg = cfg; + u32 ucnt; + + for (ucnt = 0; ucnt < no; ucnt++, tcfg++) { + if (!tcfg->clocks) { + tcfg->has_fracval = 1; + tcfg->clocks = exynos4_serial_clocks; + tcfg->clocks_size = ARRAY_SIZE(exynos4_serial_clocks); + } + } + + s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no); +} diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos4/platsmp.c new file mode 100644 index 00000000000..6d35878ec1a --- /dev/null +++ b/arch/arm/mach-exynos4/platsmp.c @@ -0,0 +1,172 @@ +/* linux/arch/arm/mach-exynos4/platsmp.c + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Cloned from linux/arch/arm/mach-vexpress/platsmp.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + +extern void exynos4_secondary_startup(void); + +/* + * control for which core is the next to come out of the secondary + * boot "holding pen" + */ + +volatile int __cpuinitdata pen_release = -1; + +/* + * Write pen_release in a way that is guaranteed to be visible to all + * observers, irrespective of whether they're taking part in coherency + * or not. This is necessary for the hotplug code to work reliably. + */ +static void write_pen_release(int val) +{ + pen_release = val; + smp_wmb(); + __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release)); + outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1)); +} + +static void __iomem *scu_base_addr(void) +{ + return (void __iomem *)(S5P_VA_SCU); +} + +static DEFINE_SPINLOCK(boot_lock); + +void __cpuinit platform_secondary_init(unsigned int cpu) +{ + /* + * if any interrupts are already enabled for the primary + * core (e.g. timer irq), then they will not have been enabled + * for us: do so + */ + gic_secondary_init(0); + + /* + * let the primary processor know we're out of the + * pen, then head off into the C entry point + */ + write_pen_release(-1); + + /* + * Synchronise with the boot thread. + */ + spin_lock(&boot_lock); + spin_unlock(&boot_lock); +} + +int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + unsigned long timeout; + + /* + * Set synchronisation state between this boot processor + * and the secondary one + */ + spin_lock(&boot_lock); + + /* + * The secondary processor is waiting to be released from + * the holding pen - release it, then wait for it to flag + * that it has been released by resetting pen_release. + * + * Note that "pen_release" is the hardware CPU ID, whereas + * "cpu" is Linux's internal ID. + */ + write_pen_release(cpu); + + /* + * Send the secondary CPU a soft interrupt, thereby causing + * the boot monitor to read the system wide flags register, + * and branch to the address found there. + */ + smp_cross_call(cpumask_of(cpu), 1); + + timeout = jiffies + (1 * HZ); + while (time_before(jiffies, timeout)) { + smp_rmb(); + if (pen_release == -1) + break; + + udelay(10); + } + + /* + * now the secondary core is starting up let it run its + * calibrations, then wait for it to finish + */ + spin_unlock(&boot_lock); + + return pen_release != -1 ? -ENOSYS : 0; +} + +/* + * Initialise the CPU possible map early - this describes the CPUs + * which may be present or become present in the system. + */ + +void __init smp_init_cpus(void) +{ + void __iomem *scu_base = scu_base_addr(); + unsigned int i, ncores; + + ncores = scu_base ? scu_get_core_count(scu_base) : 1; + + /* sanity check */ + if (ncores > NR_CPUS) { + printk(KERN_WARNING + "EXYNOS4: no. of cores (%d) greater than configured " + "maximum of %d - clipping\n", + ncores, NR_CPUS); + ncores = NR_CPUS; + } + + for (i = 0; i < ncores; i++) + set_cpu_possible(i, true); +} + +void __init platform_smp_prepare_cpus(unsigned int max_cpus) +{ + int i; + + /* + * Initialise the present map, which describes the set of CPUs + * actually populated at the present time. + */ + for (i = 0; i < max_cpus; i++) + set_cpu_present(i, true); + + scu_enable(scu_base_addr()); + + /* + * Write the address of secondary startup into the + * system-wide flags register. The boot monitor waits + * until it receives a soft interrupt, and then the + * secondary CPU branches to this address. + */ + __raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)), S5P_VA_SYSRAM); +} diff --git a/arch/arm/mach-exynos4/setup-i2c0.c b/arch/arm/mach-exynos4/setup-i2c0.c new file mode 100644 index 00000000000..d395bd17c38 --- /dev/null +++ b/arch/arm/mach-exynos4/setup-i2c0.c @@ -0,0 +1,26 @@ +/* + * linux/arch/arm/mach-exynos4/setup-i2c0.c + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * I2C0 GPIO configuration. + * + * Based on plat-s3c64xx/setup-i2c0.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +struct platform_device; /* don't need the contents */ + +#include +#include +#include + +void s3c_i2c0_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgall_range(EXYNOS4_GPD1(0), 2, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); +} diff --git a/arch/arm/mach-s5pv310/cpu.c b/arch/arm/mach-s5pv310/cpu.c deleted file mode 100644 index 0db0fb65bd7..00000000000 --- a/arch/arm/mach-s5pv310/cpu.c +++ /dev/null @@ -1,202 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/cpu.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include - -#include -#include - -#include -#include - -#include -#include -#include -#include - -#include - -extern int combiner_init(unsigned int combiner_nr, void __iomem *base, - unsigned int irq_start); -extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq); - -/* Initial IO mappings */ -static struct map_desc s5pv310_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SYSRAM, - .pfn = __phys_to_pfn(S5PV310_PA_SYSRAM), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_CMU, - .pfn = __phys_to_pfn(S5PV310_PA_CMU), - .length = SZ_128K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_PMU, - .pfn = __phys_to_pfn(S5PV310_PA_PMU), - .length = SZ_64K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_COMBINER_BASE, - .pfn = __phys_to_pfn(S5PV310_PA_COMBINER), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_COREPERI_BASE, - .pfn = __phys_to_pfn(S5PV310_PA_COREPERI), - .length = SZ_8K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_L2CC, - .pfn = __phys_to_pfn(S5PV310_PA_L2CC), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_GPIO1, - .pfn = __phys_to_pfn(S5PV310_PA_GPIO1), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_GPIO2, - .pfn = __phys_to_pfn(S5PV310_PA_GPIO2), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_GPIO3, - .pfn = __phys_to_pfn(S5PV310_PA_GPIO3), - .length = SZ_256, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_DMC0, - .pfn = __phys_to_pfn(S5PV310_PA_DMC0), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_UART, - .pfn = __phys_to_pfn(S3C_PA_UART), - .length = SZ_512K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_SROMC, - .pfn = __phys_to_pfn(S5PV310_PA_SROMC), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -static void s5pv310_idle(void) -{ - if (!need_resched()) - cpu_do_idle(); - - local_irq_enable(); -} - -/* s5pv310_map_io - * - * register the standard cpu IO areas -*/ -void __init s5pv310_map_io(void) -{ - iotable_init(s5pv310_iodesc, ARRAY_SIZE(s5pv310_iodesc)); - - /* initialize device information early */ - s5pv310_default_sdhci0(); - s5pv310_default_sdhci1(); - s5pv310_default_sdhci2(); - s5pv310_default_sdhci3(); -} - -void __init s5pv310_init_clocks(int xtal) -{ - printk(KERN_DEBUG "%s: initializing clocks\n", __func__); - - s3c24xx_register_baseclocks(xtal); - s5p_register_clocks(xtal); - s5pv310_register_clocks(); - s5pv310_setup_clocks(); -} - -void __init s5pv310_init_irq(void) -{ - int irq; - - gic_init(0, IRQ_LOCALTIMER, S5P_VA_GIC_DIST, S5P_VA_GIC_CPU); - - for (irq = 0; irq < MAX_COMBINER_NR; irq++) { - - /* - * From SPI(0) to SPI(39) and SPI(51), SPI(53) are - * connected to the interrupt combiner. These irqs - * should be initialized to support cascade interrupt. - */ - if ((irq >= 40) && !(irq == 51) && !(irq == 53)) - continue; - - combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq), - COMBINER_IRQ(irq, 0)); - combiner_cascade_irq(irq, IRQ_SPI(irq)); - } - - /* The parameters of s5p_init_irq() are for VIC init. - * Theses parameters should be NULL and 0 because S5PV310 - * uses GIC instead of VIC. - */ - s5p_init_irq(NULL, 0); -} - -struct sysdev_class s5pv310_sysclass = { - .name = "s5pv310-core", -}; - -static struct sys_device s5pv310_sysdev = { - .cls = &s5pv310_sysclass, -}; - -static int __init s5pv310_core_init(void) -{ - return sysdev_class_register(&s5pv310_sysclass); -} - -core_initcall(s5pv310_core_init); - -#ifdef CONFIG_CACHE_L2X0 -static int __init s5pv310_l2x0_cache_init(void) -{ - /* TAG, Data Latency Control: 2cycle */ - __raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL); - __raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL); - - /* L2X0 Prefetch Control */ - __raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL); - - /* L2X0 Power Control */ - __raw_writel(L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN, - S5P_VA_L2CC + L2X0_POWER_CTRL); - - l2x0_init(S5P_VA_L2CC, 0x7C470001, 0xC200ffff); - - return 0; -} - -early_initcall(s5pv310_l2x0_cache_init); -#endif - -int __init s5pv310_init(void) -{ - printk(KERN_INFO "S5PV310: Initializing architecture\n"); - - /* set idle function */ - pm_idle = s5pv310_idle; - - return sysdev_register(&s5pv310_sysdev); -} diff --git a/arch/arm/mach-s5pv310/cpufreq.c b/arch/arm/mach-s5pv310/cpufreq.c deleted file mode 100644 index b04cbc73112..00000000000 --- a/arch/arm/mach-s5pv310/cpufreq.c +++ /dev/null @@ -1,580 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/cpufreq.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5PV310 - CPU frequency scaling support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include - -static struct clk *cpu_clk; -static struct clk *moutcore; -static struct clk *mout_mpll; -static struct clk *mout_apll; - -#ifdef CONFIG_REGULATOR -static struct regulator *arm_regulator; -static struct regulator *int_regulator; -#endif - -static struct cpufreq_freqs freqs; -static unsigned int memtype; - -enum s5pv310_memory_type { - DDR2 = 4, - LPDDR2, - DDR3, -}; - -enum cpufreq_level_index { - L0, L1, L2, L3, CPUFREQ_LEVEL_END, -}; - -static struct cpufreq_frequency_table s5pv310_freq_table[] = { - {L0, 1000*1000}, - {L1, 800*1000}, - {L2, 400*1000}, - {L3, 100*1000}, - {0, CPUFREQ_TABLE_END}, -}; - -static unsigned int clkdiv_cpu0[CPUFREQ_LEVEL_END][7] = { - /* - * Clock divider value for following - * { DIVCORE, DIVCOREM0, DIVCOREM1, DIVPERIPH, - * DIVATB, DIVPCLK_DBG, DIVAPLL } - */ - - /* ARM L0: 1000MHz */ - { 0, 3, 7, 3, 3, 0, 1 }, - - /* ARM L1: 800MHz */ - { 0, 3, 7, 3, 3, 0, 1 }, - - /* ARM L2: 400MHz */ - { 0, 1, 3, 1, 3, 0, 1 }, - - /* ARM L3: 100MHz */ - { 0, 0, 1, 0, 3, 1, 1 }, -}; - -static unsigned int clkdiv_cpu1[CPUFREQ_LEVEL_END][2] = { - /* - * Clock divider value for following - * { DIVCOPY, DIVHPM } - */ - - /* ARM L0: 1000MHz */ - { 3, 0 }, - - /* ARM L1: 800MHz */ - { 3, 0 }, - - /* ARM L2: 400MHz */ - { 3, 0 }, - - /* ARM L3: 100MHz */ - { 3, 0 }, -}; - -static unsigned int clkdiv_dmc0[CPUFREQ_LEVEL_END][8] = { - /* - * Clock divider value for following - * { DIVACP, DIVACP_PCLK, DIVDPHY, DIVDMC, DIVDMCD - * DIVDMCP, DIVCOPY2, DIVCORE_TIMERS } - */ - - /* DMC L0: 400MHz */ - { 3, 1, 1, 1, 1, 1, 3, 1 }, - - /* DMC L1: 400MHz */ - { 3, 1, 1, 1, 1, 1, 3, 1 }, - - /* DMC L2: 266.7MHz */ - { 7, 1, 1, 2, 1, 1, 3, 1 }, - - /* DMC L3: 200MHz */ - { 7, 1, 1, 3, 1, 1, 3, 1 }, -}; - -static unsigned int clkdiv_top[CPUFREQ_LEVEL_END][5] = { - /* - * Clock divider value for following - * { DIVACLK200, DIVACLK100, DIVACLK160, DIVACLK133, DIVONENAND } - */ - - /* ACLK200 L0: 200MHz */ - { 3, 7, 4, 5, 1 }, - - /* ACLK200 L1: 200MHz */ - { 3, 7, 4, 5, 1 }, - - /* ACLK200 L2: 160MHz */ - { 4, 7, 5, 7, 1 }, - - /* ACLK200 L3: 133.3MHz */ - { 5, 7, 7, 7, 1 }, -}; - -static unsigned int clkdiv_lr_bus[CPUFREQ_LEVEL_END][2] = { - /* - * Clock divider value for following - * { DIVGDL/R, DIVGPL/R } - */ - - /* ACLK_GDL/R L0: 200MHz */ - { 3, 1 }, - - /* ACLK_GDL/R L1: 200MHz */ - { 3, 1 }, - - /* ACLK_GDL/R L2: 160MHz */ - { 4, 1 }, - - /* ACLK_GDL/R L3: 133.3MHz */ - { 5, 1 }, -}; - -struct cpufreq_voltage_table { - unsigned int index; /* any */ - unsigned int arm_volt; /* uV */ - unsigned int int_volt; -}; - -static struct cpufreq_voltage_table s5pv310_volt_table[CPUFREQ_LEVEL_END] = { - { - .index = L0, - .arm_volt = 1200000, - .int_volt = 1100000, - }, { - .index = L1, - .arm_volt = 1100000, - .int_volt = 1100000, - }, { - .index = L2, - .arm_volt = 1000000, - .int_volt = 1000000, - }, { - .index = L3, - .arm_volt = 900000, - .int_volt = 1000000, - }, -}; - -static unsigned int s5pv310_apll_pms_table[CPUFREQ_LEVEL_END] = { - /* APLL FOUT L0: 1000MHz */ - ((250 << 16) | (6 << 8) | 1), - - /* APLL FOUT L1: 800MHz */ - ((200 << 16) | (6 << 8) | 1), - - /* APLL FOUT L2 : 400MHz */ - ((200 << 16) | (6 << 8) | 2), - - /* APLL FOUT L3: 100MHz */ - ((200 << 16) | (6 << 8) | 4), -}; - -int s5pv310_verify_speed(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, s5pv310_freq_table); -} - -unsigned int s5pv310_getspeed(unsigned int cpu) -{ - return clk_get_rate(cpu_clk) / 1000; -} - -void s5pv310_set_clkdiv(unsigned int div_index) -{ - unsigned int tmp; - - /* Change Divider - CPU0 */ - - tmp = __raw_readl(S5P_CLKDIV_CPU); - - tmp &= ~(S5P_CLKDIV_CPU0_CORE_MASK | S5P_CLKDIV_CPU0_COREM0_MASK | - S5P_CLKDIV_CPU0_COREM1_MASK | S5P_CLKDIV_CPU0_PERIPH_MASK | - S5P_CLKDIV_CPU0_ATB_MASK | S5P_CLKDIV_CPU0_PCLKDBG_MASK | - S5P_CLKDIV_CPU0_APLL_MASK); - - tmp |= ((clkdiv_cpu0[div_index][0] << S5P_CLKDIV_CPU0_CORE_SHIFT) | - (clkdiv_cpu0[div_index][1] << S5P_CLKDIV_CPU0_COREM0_SHIFT) | - (clkdiv_cpu0[div_index][2] << S5P_CLKDIV_CPU0_COREM1_SHIFT) | - (clkdiv_cpu0[div_index][3] << S5P_CLKDIV_CPU0_PERIPH_SHIFT) | - (clkdiv_cpu0[div_index][4] << S5P_CLKDIV_CPU0_ATB_SHIFT) | - (clkdiv_cpu0[div_index][5] << S5P_CLKDIV_CPU0_PCLKDBG_SHIFT) | - (clkdiv_cpu0[div_index][6] << S5P_CLKDIV_CPU0_APLL_SHIFT)); - - __raw_writel(tmp, S5P_CLKDIV_CPU); - - do { - tmp = __raw_readl(S5P_CLKDIV_STATCPU); - } while (tmp & 0x1111111); - - /* Change Divider - CPU1 */ - - tmp = __raw_readl(S5P_CLKDIV_CPU1); - - tmp &= ~((0x7 << 4) | 0x7); - - tmp |= ((clkdiv_cpu1[div_index][0] << 4) | - (clkdiv_cpu1[div_index][1] << 0)); - - __raw_writel(tmp, S5P_CLKDIV_CPU1); - - do { - tmp = __raw_readl(S5P_CLKDIV_STATCPU1); - } while (tmp & 0x11); - - /* Change Divider - DMC0 */ - - tmp = __raw_readl(S5P_CLKDIV_DMC0); - - tmp &= ~(S5P_CLKDIV_DMC0_ACP_MASK | S5P_CLKDIV_DMC0_ACPPCLK_MASK | - S5P_CLKDIV_DMC0_DPHY_MASK | S5P_CLKDIV_DMC0_DMC_MASK | - S5P_CLKDIV_DMC0_DMCD_MASK | S5P_CLKDIV_DMC0_DMCP_MASK | - S5P_CLKDIV_DMC0_COPY2_MASK | S5P_CLKDIV_DMC0_CORETI_MASK); - - tmp |= ((clkdiv_dmc0[div_index][0] << S5P_CLKDIV_DMC0_ACP_SHIFT) | - (clkdiv_dmc0[div_index][1] << S5P_CLKDIV_DMC0_ACPPCLK_SHIFT) | - (clkdiv_dmc0[div_index][2] << S5P_CLKDIV_DMC0_DPHY_SHIFT) | - (clkdiv_dmc0[div_index][3] << S5P_CLKDIV_DMC0_DMC_SHIFT) | - (clkdiv_dmc0[div_index][4] << S5P_CLKDIV_DMC0_DMCD_SHIFT) | - (clkdiv_dmc0[div_index][5] << S5P_CLKDIV_DMC0_DMCP_SHIFT) | - (clkdiv_dmc0[div_index][6] << S5P_CLKDIV_DMC0_COPY2_SHIFT) | - (clkdiv_dmc0[div_index][7] << S5P_CLKDIV_DMC0_CORETI_SHIFT)); - - __raw_writel(tmp, S5P_CLKDIV_DMC0); - - do { - tmp = __raw_readl(S5P_CLKDIV_STAT_DMC0); - } while (tmp & 0x11111111); - - /* Change Divider - TOP */ - - tmp = __raw_readl(S5P_CLKDIV_TOP); - - tmp &= ~(S5P_CLKDIV_TOP_ACLK200_MASK | S5P_CLKDIV_TOP_ACLK100_MASK | - S5P_CLKDIV_TOP_ACLK160_MASK | S5P_CLKDIV_TOP_ACLK133_MASK | - S5P_CLKDIV_TOP_ONENAND_MASK); - - tmp |= ((clkdiv_top[div_index][0] << S5P_CLKDIV_TOP_ACLK200_SHIFT) | - (clkdiv_top[div_index][1] << S5P_CLKDIV_TOP_ACLK100_SHIFT) | - (clkdiv_top[div_index][2] << S5P_CLKDIV_TOP_ACLK160_SHIFT) | - (clkdiv_top[div_index][3] << S5P_CLKDIV_TOP_ACLK133_SHIFT) | - (clkdiv_top[div_index][4] << S5P_CLKDIV_TOP_ONENAND_SHIFT)); - - __raw_writel(tmp, S5P_CLKDIV_TOP); - - do { - tmp = __raw_readl(S5P_CLKDIV_STAT_TOP); - } while (tmp & 0x11111); - - /* Change Divider - LEFTBUS */ - - tmp = __raw_readl(S5P_CLKDIV_LEFTBUS); - - tmp &= ~(S5P_CLKDIV_BUS_GDLR_MASK | S5P_CLKDIV_BUS_GPLR_MASK); - - tmp |= ((clkdiv_lr_bus[div_index][0] << S5P_CLKDIV_BUS_GDLR_SHIFT) | - (clkdiv_lr_bus[div_index][1] << S5P_CLKDIV_BUS_GPLR_SHIFT)); - - __raw_writel(tmp, S5P_CLKDIV_LEFTBUS); - - do { - tmp = __raw_readl(S5P_CLKDIV_STAT_LEFTBUS); - } while (tmp & 0x11); - - /* Change Divider - RIGHTBUS */ - - tmp = __raw_readl(S5P_CLKDIV_RIGHTBUS); - - tmp &= ~(S5P_CLKDIV_BUS_GDLR_MASK | S5P_CLKDIV_BUS_GPLR_MASK); - - tmp |= ((clkdiv_lr_bus[div_index][0] << S5P_CLKDIV_BUS_GDLR_SHIFT) | - (clkdiv_lr_bus[div_index][1] << S5P_CLKDIV_BUS_GPLR_SHIFT)); - - __raw_writel(tmp, S5P_CLKDIV_RIGHTBUS); - - do { - tmp = __raw_readl(S5P_CLKDIV_STAT_RIGHTBUS); - } while (tmp & 0x11); -} - -static void s5pv310_set_apll(unsigned int index) -{ - unsigned int tmp; - - /* 1. MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */ - clk_set_parent(moutcore, mout_mpll); - - do { - tmp = (__raw_readl(S5P_CLKMUX_STATCPU) - >> S5P_CLKSRC_CPU_MUXCORE_SHIFT); - tmp &= 0x7; - } while (tmp != 0x2); - - /* 2. Set APLL Lock time */ - __raw_writel(S5P_APLL_LOCKTIME, S5P_APLL_LOCK); - - /* 3. Change PLL PMS values */ - tmp = __raw_readl(S5P_APLL_CON0); - tmp &= ~((0x3ff << 16) | (0x3f << 8) | (0x7 << 0)); - tmp |= s5pv310_apll_pms_table[index]; - __raw_writel(tmp, S5P_APLL_CON0); - - /* 4. wait_lock_time */ - do { - tmp = __raw_readl(S5P_APLL_CON0); - } while (!(tmp & (0x1 << S5P_APLLCON0_LOCKED_SHIFT))); - - /* 5. MUX_CORE_SEL = APLL */ - clk_set_parent(moutcore, mout_apll); - - do { - tmp = __raw_readl(S5P_CLKMUX_STATCPU); - tmp &= S5P_CLKMUX_STATCPU_MUXCORE_MASK; - } while (tmp != (0x1 << S5P_CLKSRC_CPU_MUXCORE_SHIFT)); -} - -static void s5pv310_set_frequency(unsigned int old_index, unsigned int new_index) -{ - unsigned int tmp; - - if (old_index > new_index) { - /* The frequency changing to L0 needs to change apll */ - if (freqs.new == s5pv310_freq_table[L0].frequency) { - /* 1. Change the system clock divider values */ - s5pv310_set_clkdiv(new_index); - - /* 2. Change the apll m,p,s value */ - s5pv310_set_apll(new_index); - } else { - /* 1. Change the system clock divider values */ - s5pv310_set_clkdiv(new_index); - - /* 2. Change just s value in apll m,p,s value */ - tmp = __raw_readl(S5P_APLL_CON0); - tmp &= ~(0x7 << 0); - tmp |= (s5pv310_apll_pms_table[new_index] & 0x7); - __raw_writel(tmp, S5P_APLL_CON0); - } - } - - else if (old_index < new_index) { - /* The frequency changing from L0 needs to change apll */ - if (freqs.old == s5pv310_freq_table[L0].frequency) { - /* 1. Change the apll m,p,s value */ - s5pv310_set_apll(new_index); - - /* 2. Change the system clock divider values */ - s5pv310_set_clkdiv(new_index); - } else { - /* 1. Change just s value in apll m,p,s value */ - tmp = __raw_readl(S5P_APLL_CON0); - tmp &= ~(0x7 << 0); - tmp |= (s5pv310_apll_pms_table[new_index] & 0x7); - __raw_writel(tmp, S5P_APLL_CON0); - - /* 2. Change the system clock divider values */ - s5pv310_set_clkdiv(new_index); - } - } -} - -static int s5pv310_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int index, old_index; - unsigned int arm_volt, int_volt; - - freqs.old = s5pv310_getspeed(policy->cpu); - - if (cpufreq_frequency_table_target(policy, s5pv310_freq_table, - freqs.old, relation, &old_index)) - return -EINVAL; - - if (cpufreq_frequency_table_target(policy, s5pv310_freq_table, - target_freq, relation, &index)) - return -EINVAL; - - freqs.new = s5pv310_freq_table[index].frequency; - freqs.cpu = policy->cpu; - - if (freqs.new == freqs.old) - return 0; - - /* get the voltage value */ - arm_volt = s5pv310_volt_table[index].arm_volt; - int_volt = s5pv310_volt_table[index].int_volt; - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - /* control regulator */ - if (freqs.new > freqs.old) { - /* Voltage up */ -#ifdef CONFIG_REGULATOR - regulator_set_voltage(arm_regulator, arm_volt, arm_volt); - regulator_set_voltage(int_regulator, int_volt, int_volt); -#endif - } - - /* Clock Configuration Procedure */ - s5pv310_set_frequency(old_index, index); - - /* control regulator */ - if (freqs.new < freqs.old) { - /* Voltage down */ -#ifdef CONFIG_REGULATOR - regulator_set_voltage(arm_regulator, arm_volt, arm_volt); - regulator_set_voltage(int_regulator, int_volt, int_volt); -#endif - } - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return 0; -} - -#ifdef CONFIG_PM -static int s5pv310_cpufreq_suspend(struct cpufreq_policy *policy, - pm_message_t pmsg) -{ - return 0; -} - -static int s5pv310_cpufreq_resume(struct cpufreq_policy *policy) -{ - return 0; -} -#endif - -static int s5pv310_cpufreq_cpu_init(struct cpufreq_policy *policy) -{ - policy->cur = policy->min = policy->max = s5pv310_getspeed(policy->cpu); - - cpufreq_frequency_table_get_attr(s5pv310_freq_table, policy->cpu); - - /* set the transition latency value */ - policy->cpuinfo.transition_latency = 100000; - - /* - * S5PV310 multi-core processors has 2 cores - * that the frequency cannot be set independently. - * Each cpu is bound to the same speed. - * So the affected cpu is all of the cpus. - */ - cpumask_setall(policy->cpus); - - return cpufreq_frequency_table_cpuinfo(policy, s5pv310_freq_table); -} - -static struct cpufreq_driver s5pv310_driver = { - .flags = CPUFREQ_STICKY, - .verify = s5pv310_verify_speed, - .target = s5pv310_target, - .get = s5pv310_getspeed, - .init = s5pv310_cpufreq_cpu_init, - .name = "s5pv310_cpufreq", -#ifdef CONFIG_PM - .suspend = s5pv310_cpufreq_suspend, - .resume = s5pv310_cpufreq_resume, -#endif -}; - -static int __init s5pv310_cpufreq_init(void) -{ - cpu_clk = clk_get(NULL, "armclk"); - if (IS_ERR(cpu_clk)) - return PTR_ERR(cpu_clk); - - moutcore = clk_get(NULL, "moutcore"); - if (IS_ERR(moutcore)) - goto out; - - mout_mpll = clk_get(NULL, "mout_mpll"); - if (IS_ERR(mout_mpll)) - goto out; - - mout_apll = clk_get(NULL, "mout_apll"); - if (IS_ERR(mout_apll)) - goto out; - -#ifdef CONFIG_REGULATOR - arm_regulator = regulator_get(NULL, "vdd_arm"); - if (IS_ERR(arm_regulator)) { - printk(KERN_ERR "failed to get resource %s\n", "vdd_arm"); - goto out; - } - - int_regulator = regulator_get(NULL, "vdd_int"); - if (IS_ERR(int_regulator)) { - printk(KERN_ERR "failed to get resource %s\n", "vdd_int"); - goto out; - } -#endif - - /* - * Check DRAM type. - * Because DVFS level is different according to DRAM type. - */ - memtype = __raw_readl(S5P_VA_DMC0 + S5P_DMC0_MEMCON_OFFSET); - memtype = (memtype >> S5P_DMC0_MEMTYPE_SHIFT); - memtype &= S5P_DMC0_MEMTYPE_MASK; - - if ((memtype < DDR2) && (memtype > DDR3)) { - printk(KERN_ERR "%s: wrong memtype= 0x%x\n", __func__, memtype); - goto out; - } else { - printk(KERN_DEBUG "%s: memtype= 0x%x\n", __func__, memtype); - } - - return cpufreq_register_driver(&s5pv310_driver); - -out: - if (!IS_ERR(cpu_clk)) - clk_put(cpu_clk); - - if (!IS_ERR(moutcore)) - clk_put(moutcore); - - if (!IS_ERR(mout_mpll)) - clk_put(mout_mpll); - - if (!IS_ERR(mout_apll)) - clk_put(mout_apll); - -#ifdef CONFIG_REGULATOR - if (!IS_ERR(arm_regulator)) - regulator_put(arm_regulator); - - if (!IS_ERR(int_regulator)) - regulator_put(int_regulator); -#endif - - printk(KERN_ERR "%s: failed initialization\n", __func__); - - return -EINVAL; -} -late_initcall(s5pv310_cpufreq_init); diff --git a/arch/arm/mach-s5pv310/dma.c b/arch/arm/mach-s5pv310/dma.c deleted file mode 100644 index 20066c7c9e5..00000000000 --- a/arch/arm/mach-s5pv310/dma.c +++ /dev/null @@ -1,168 +0,0 @@ -/* - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include - -#include -#include - -#include -#include - -#include - -static u64 dma_dmamask = DMA_BIT_MASK(32); - -static struct resource s5pv310_pdma0_resource[] = { - [0] = { - .start = S5PV310_PA_PDMA0, - .end = S5PV310_PA_PDMA0 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PDMA0, - .end = IRQ_PDMA0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct s3c_pl330_platdata s5pv310_pdma0_pdata = { - .peri = { - [0] = DMACH_PCM0_RX, - [1] = DMACH_PCM0_TX, - [2] = DMACH_PCM2_RX, - [3] = DMACH_PCM2_TX, - [4] = DMACH_MSM_REQ0, - [5] = DMACH_MSM_REQ2, - [6] = DMACH_SPI0_RX, - [7] = DMACH_SPI0_TX, - [8] = DMACH_SPI2_RX, - [9] = DMACH_SPI2_TX, - [10] = DMACH_I2S0S_TX, - [11] = DMACH_I2S0_RX, - [12] = DMACH_I2S0_TX, - [13] = DMACH_I2S2_RX, - [14] = DMACH_I2S2_TX, - [15] = DMACH_UART0_RX, - [16] = DMACH_UART0_TX, - [17] = DMACH_UART2_RX, - [18] = DMACH_UART2_TX, - [19] = DMACH_UART4_RX, - [20] = DMACH_UART4_TX, - [21] = DMACH_SLIMBUS0_RX, - [22] = DMACH_SLIMBUS0_TX, - [23] = DMACH_SLIMBUS2_RX, - [24] = DMACH_SLIMBUS2_TX, - [25] = DMACH_SLIMBUS4_RX, - [26] = DMACH_SLIMBUS4_TX, - [27] = DMACH_AC97_MICIN, - [28] = DMACH_AC97_PCMIN, - [29] = DMACH_AC97_PCMOUT, - [30] = DMACH_MAX, - [31] = DMACH_MAX, - }, -}; - -static struct platform_device s5pv310_device_pdma0 = { - .name = "s3c-pl330", - .id = 0, - .num_resources = ARRAY_SIZE(s5pv310_pdma0_resource), - .resource = s5pv310_pdma0_resource, - .dev = { - .dma_mask = &dma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5pv310_pdma0_pdata, - }, -}; - -static struct resource s5pv310_pdma1_resource[] = { - [0] = { - .start = S5PV310_PA_PDMA1, - .end = S5PV310_PA_PDMA1 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PDMA1, - .end = IRQ_PDMA1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct s3c_pl330_platdata s5pv310_pdma1_pdata = { - .peri = { - [0] = DMACH_PCM0_RX, - [1] = DMACH_PCM0_TX, - [2] = DMACH_PCM1_RX, - [3] = DMACH_PCM1_TX, - [4] = DMACH_MSM_REQ1, - [5] = DMACH_MSM_REQ3, - [6] = DMACH_SPI1_RX, - [7] = DMACH_SPI1_TX, - [8] = DMACH_I2S0S_TX, - [9] = DMACH_I2S0_RX, - [10] = DMACH_I2S0_TX, - [11] = DMACH_I2S1_RX, - [12] = DMACH_I2S1_TX, - [13] = DMACH_UART0_RX, - [14] = DMACH_UART0_TX, - [15] = DMACH_UART1_RX, - [16] = DMACH_UART1_TX, - [17] = DMACH_UART3_RX, - [18] = DMACH_UART3_TX, - [19] = DMACH_SLIMBUS1_RX, - [20] = DMACH_SLIMBUS1_TX, - [21] = DMACH_SLIMBUS3_RX, - [22] = DMACH_SLIMBUS3_TX, - [23] = DMACH_SLIMBUS5_RX, - [24] = DMACH_SLIMBUS5_TX, - [25] = DMACH_SLIMBUS0AUX_RX, - [26] = DMACH_SLIMBUS0AUX_TX, - [27] = DMACH_SPDIF, - [28] = DMACH_MAX, - [29] = DMACH_MAX, - [30] = DMACH_MAX, - [31] = DMACH_MAX, - }, -}; - -static struct platform_device s5pv310_device_pdma1 = { - .name = "s3c-pl330", - .id = 1, - .num_resources = ARRAY_SIZE(s5pv310_pdma1_resource), - .resource = s5pv310_pdma1_resource, - .dev = { - .dma_mask = &dma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5pv310_pdma1_pdata, - }, -}; - -static struct platform_device *s5pv310_dmacs[] __initdata = { - &s5pv310_device_pdma0, - &s5pv310_device_pdma1, -}; - -static int __init s5pv310_dma_init(void) -{ - platform_add_devices(s5pv310_dmacs, ARRAY_SIZE(s5pv310_dmacs)); - - return 0; -} -arch_initcall(s5pv310_dma_init); diff --git a/arch/arm/mach-s5pv310/gpiolib.c b/arch/arm/mach-s5pv310/gpiolib.c deleted file mode 100644 index 55217b8923e..00000000000 --- a/arch/arm/mach-s5pv310/gpiolib.c +++ /dev/null @@ -1,304 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/gpiolib.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5PV310 - GPIOlib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include - -#include - -#include -#include -#include - -static struct s3c_gpio_cfg gpio_cfg = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_cfg_noint = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -/* - * Following are the gpio banks in v310. - * - * The 'config' member when left to NULL, is initialized to the default - * structure gpio_cfg in the init function below. - * - * The 'base' member is also initialized in the init function below. - * Note: The initialization of 'base' member of s3c_gpio_chip structure - * uses the above macro and depends on the banks being listed in order here. - */ -static struct s3c_gpio_chip s5pv310_gpio_part1_4bit[] = { - { - .chip = { - .base = S5PV310_GPA0(0), - .ngpio = S5PV310_GPIO_A0_NR, - .label = "GPA0", - }, - }, { - .chip = { - .base = S5PV310_GPA1(0), - .ngpio = S5PV310_GPIO_A1_NR, - .label = "GPA1", - }, - }, { - .chip = { - .base = S5PV310_GPB(0), - .ngpio = S5PV310_GPIO_B_NR, - .label = "GPB", - }, - }, { - .chip = { - .base = S5PV310_GPC0(0), - .ngpio = S5PV310_GPIO_C0_NR, - .label = "GPC0", - }, - }, { - .chip = { - .base = S5PV310_GPC1(0), - .ngpio = S5PV310_GPIO_C1_NR, - .label = "GPC1", - }, - }, { - .chip = { - .base = S5PV310_GPD0(0), - .ngpio = S5PV310_GPIO_D0_NR, - .label = "GPD0", - }, - }, { - .chip = { - .base = S5PV310_GPD1(0), - .ngpio = S5PV310_GPIO_D1_NR, - .label = "GPD1", - }, - }, { - .chip = { - .base = S5PV310_GPE0(0), - .ngpio = S5PV310_GPIO_E0_NR, - .label = "GPE0", - }, - }, { - .chip = { - .base = S5PV310_GPE1(0), - .ngpio = S5PV310_GPIO_E1_NR, - .label = "GPE1", - }, - }, { - .chip = { - .base = S5PV310_GPE2(0), - .ngpio = S5PV310_GPIO_E2_NR, - .label = "GPE2", - }, - }, { - .chip = { - .base = S5PV310_GPE3(0), - .ngpio = S5PV310_GPIO_E3_NR, - .label = "GPE3", - }, - }, { - .chip = { - .base = S5PV310_GPE4(0), - .ngpio = S5PV310_GPIO_E4_NR, - .label = "GPE4", - }, - }, { - .chip = { - .base = S5PV310_GPF0(0), - .ngpio = S5PV310_GPIO_F0_NR, - .label = "GPF0", - }, - }, { - .chip = { - .base = S5PV310_GPF1(0), - .ngpio = S5PV310_GPIO_F1_NR, - .label = "GPF1", - }, - }, { - .chip = { - .base = S5PV310_GPF2(0), - .ngpio = S5PV310_GPIO_F2_NR, - .label = "GPF2", - }, - }, { - .chip = { - .base = S5PV310_GPF3(0), - .ngpio = S5PV310_GPIO_F3_NR, - .label = "GPF3", - }, - }, -}; - -static struct s3c_gpio_chip s5pv310_gpio_part2_4bit[] = { - { - .chip = { - .base = S5PV310_GPJ0(0), - .ngpio = S5PV310_GPIO_J0_NR, - .label = "GPJ0", - }, - }, { - .chip = { - .base = S5PV310_GPJ1(0), - .ngpio = S5PV310_GPIO_J1_NR, - .label = "GPJ1", - }, - }, { - .chip = { - .base = S5PV310_GPK0(0), - .ngpio = S5PV310_GPIO_K0_NR, - .label = "GPK0", - }, - }, { - .chip = { - .base = S5PV310_GPK1(0), - .ngpio = S5PV310_GPIO_K1_NR, - .label = "GPK1", - }, - }, { - .chip = { - .base = S5PV310_GPK2(0), - .ngpio = S5PV310_GPIO_K2_NR, - .label = "GPK2", - }, - }, { - .chip = { - .base = S5PV310_GPK3(0), - .ngpio = S5PV310_GPIO_K3_NR, - .label = "GPK3", - }, - }, { - .chip = { - .base = S5PV310_GPL0(0), - .ngpio = S5PV310_GPIO_L0_NR, - .label = "GPL0", - }, - }, { - .chip = { - .base = S5PV310_GPL1(0), - .ngpio = S5PV310_GPIO_L1_NR, - .label = "GPL1", - }, - }, { - .chip = { - .base = S5PV310_GPL2(0), - .ngpio = S5PV310_GPIO_L2_NR, - .label = "GPL2", - }, - }, { - .base = (S5P_VA_GPIO2 + 0xC00), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(0), - .chip = { - .base = S5PV310_GPX0(0), - .ngpio = S5PV310_GPIO_X0_NR, - .label = "GPX0", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO2 + 0xC20), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(8), - .chip = { - .base = S5PV310_GPX1(0), - .ngpio = S5PV310_GPIO_X1_NR, - .label = "GPX1", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO2 + 0xC40), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(16), - .chip = { - .base = S5PV310_GPX2(0), - .ngpio = S5PV310_GPIO_X2_NR, - .label = "GPX2", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO2 + 0xC60), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(24), - .chip = { - .base = S5PV310_GPX3(0), - .ngpio = S5PV310_GPIO_X3_NR, - .label = "GPX3", - .to_irq = samsung_gpiolib_to_irq, - }, - }, -}; - -static struct s3c_gpio_chip s5pv310_gpio_part3_4bit[] = { - { - .chip = { - .base = S5PV310_GPZ(0), - .ngpio = S5PV310_GPIO_Z_NR, - .label = "GPZ", - }, - }, -}; - -static __init int s5pv310_gpiolib_init(void) -{ - struct s3c_gpio_chip *chip; - int i; - int nr_chips; - - /* GPIO part 1 */ - - chip = s5pv310_gpio_part1_4bit; - nr_chips = ARRAY_SIZE(s5pv310_gpio_part1_4bit); - - for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) - chip->config = &gpio_cfg; - if (chip->base == NULL) - chip->base = S5P_VA_GPIO1 + (i) * 0x20; - } - - samsung_gpiolib_add_4bit_chips(s5pv310_gpio_part1_4bit, nr_chips); - - /* GPIO part 2 */ - - chip = s5pv310_gpio_part2_4bit; - nr_chips = ARRAY_SIZE(s5pv310_gpio_part2_4bit); - - for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) - chip->config = &gpio_cfg; - if (chip->base == NULL) - chip->base = S5P_VA_GPIO2 + (i) * 0x20; - } - - samsung_gpiolib_add_4bit_chips(s5pv310_gpio_part2_4bit, nr_chips); - - /* GPIO part 3 */ - - chip = s5pv310_gpio_part3_4bit; - nr_chips = ARRAY_SIZE(s5pv310_gpio_part3_4bit); - - for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) - chip->config = &gpio_cfg; - if (chip->base == NULL) - chip->base = S5P_VA_GPIO3 + (i) * 0x20; - } - - samsung_gpiolib_add_4bit_chips(s5pv310_gpio_part3_4bit, nr_chips); - - return 0; -} -core_initcall(s5pv310_gpiolib_init); diff --git a/arch/arm/mach-s5pv310/headsmp.S b/arch/arm/mach-s5pv310/headsmp.S deleted file mode 100644 index 164b7b04571..00000000000 --- a/arch/arm/mach-s5pv310/headsmp.S +++ /dev/null @@ -1,41 +0,0 @@ -/* - * linux/arch/arm/mach-s5pv310/headsmp.S - * - * Cloned from linux/arch/arm/mach-realview/headsmp.S - * - * Copyright (c) 2003 ARM Limited - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include - - __INIT - -/* - * s5pv310 specific entry point for secondary CPUs. This provides - * a "holding pen" into which all secondary cores are held until we're - * ready for them to initialise. - */ -ENTRY(s5pv310_secondary_startup) - mrc p15, 0, r0, c0, c0, 5 - and r0, r0, #15 - adr r4, 1f - ldmia r4, {r5, r6} - sub r4, r4, r5 - add r6, r6, r4 -pen: ldr r7, [r6] - cmp r7, r0 - bne pen - - /* - * we've been released from the holding pen: secondary_stack - * should now contain the SVC stack for this core - */ - b secondary_startup - -1: .long . - .long pen_release diff --git a/arch/arm/mach-s5pv310/hotplug.c b/arch/arm/mach-s5pv310/hotplug.c deleted file mode 100644 index c24235c89ee..00000000000 --- a/arch/arm/mach-s5pv310/hotplug.c +++ /dev/null @@ -1,130 +0,0 @@ -/* linux arch/arm/mach-s5pv310/hotplug.c - * - * Cloned from linux/arch/arm/mach-realview/hotplug.c - * - * Copyright (C) 2002 ARM Ltd. - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include - -#include - -extern volatile int pen_release; - -static inline void cpu_enter_lowpower(void) -{ - unsigned int v; - - flush_cache_all(); - asm volatile( - " mcr p15, 0, %1, c7, c5, 0\n" - " mcr p15, 0, %1, c7, c10, 4\n" - /* - * Turn off coherency - */ - " mrc p15, 0, %0, c1, c0, 1\n" - " bic %0, %0, #0x20\n" - " mcr p15, 0, %0, c1, c0, 1\n" - " mrc p15, 0, %0, c1, c0, 0\n" - " bic %0, %0, %2\n" - " mcr p15, 0, %0, c1, c0, 0\n" - : "=&r" (v) - : "r" (0), "Ir" (CR_C) - : "cc"); -} - -static inline void cpu_leave_lowpower(void) -{ - unsigned int v; - - asm volatile( - "mrc p15, 0, %0, c1, c0, 0\n" - " orr %0, %0, %1\n" - " mcr p15, 0, %0, c1, c0, 0\n" - " mrc p15, 0, %0, c1, c0, 1\n" - " orr %0, %0, #0x20\n" - " mcr p15, 0, %0, c1, c0, 1\n" - : "=&r" (v) - : "Ir" (CR_C) - : "cc"); -} - -static inline void platform_do_lowpower(unsigned int cpu, int *spurious) -{ - /* - * there is no power-control hardware on this platform, so all - * we can do is put the core into WFI; this is safe as the calling - * code will have already disabled interrupts - */ - for (;;) { - /* - * here's the WFI - */ - asm(".word 0xe320f003\n" - : - : - : "memory", "cc"); - - if (pen_release == cpu) { - /* - * OK, proper wakeup, we're done - */ - break; - } - - /* - * Getting here, means that we have come out of WFI without - * having been woken up - this shouldn't happen - * - * Just note it happening - when we're woken, we can report - * its occurrence. - */ - (*spurious)++; - } -} - -int platform_cpu_kill(unsigned int cpu) -{ - return 1; -} - -/* - * platform-specific code to shutdown a CPU - * - * Called with IRQs disabled - */ -void platform_cpu_die(unsigned int cpu) -{ - int spurious = 0; - - /* - * we're ready for shutdown now, so do it - */ - cpu_enter_lowpower(); - platform_do_lowpower(cpu, &spurious); - - /* - * bring this CPU back into the world of cache - * coherency, and then restore interrupts - */ - cpu_leave_lowpower(); - - if (spurious) - pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious); -} - -int platform_cpu_disable(unsigned int cpu) -{ - /* - * we don't allow CPU 0 to be shutdown (it is still too special - * e.g. clock tick interrupts) - */ - return cpu == 0 ? -EPERM : 0; -} diff --git a/arch/arm/mach-s5pv310/include/mach/debug-macro.S b/arch/arm/mach-s5pv310/include/mach/debug-macro.S deleted file mode 100644 index b0d920c474d..00000000000 --- a/arch/arm/mach-s5pv310/include/mach/debug-macro.S +++ /dev/null @@ -1,35 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/debug-macro.S - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* pull in the relevant register and map files. */ - -#include - - /* note, for the boot process to work we have to keep the UART - * virtual address aligned to an 1MiB boundary for the L1 - * mapping the head code makes. We keep the UART virtual address - * aligned and add in the offset when we load the value here. - */ - - .macro addruart, rp, rv - ldreq \rp, = S3C_PA_UART - ldrne \rv, = S3C_VA_UART -#if CONFIG_DEBUG_S3C_UART != 0 - add \rp, \rp, #(0x10000 * CONFIG_DEBUG_S3C_UART) - add \rv, \rv, #(0x10000 * CONFIG_DEBUG_S3C_UART) -#endif - .endm - -#define fifo_full fifo_full_s5pv210 -#define fifo_level fifo_level_s5pv210 - -#include diff --git a/arch/arm/mach-s5pv310/include/mach/dma.h b/arch/arm/mach-s5pv310/include/mach/dma.h deleted file mode 100644 index 81209eb1409..00000000000 --- a/arch/arm/mach-s5pv310/include/mach/dma.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __MACH_DMA_H -#define __MACH_DMA_H - -/* This platform uses the common S3C DMA API driver for PL330 */ -#include - -#endif /* __MACH_DMA_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/entry-macro.S b/arch/arm/mach-s5pv310/include/mach/entry-macro.S deleted file mode 100644 index e600e1d522d..00000000000 --- a/arch/arm/mach-s5pv310/include/mach/entry-macro.S +++ /dev/null @@ -1,84 +0,0 @@ -/* arch/arm/mach-s5pv310/include/mach/entry-macro.S - * - * Cloned from arch/arm/mach-realview/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for S5PV310 platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. -*/ - -#include -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - ldr \base, =gic_cpu_base_addr - ldr \base, [\base] - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - /* - * The interrupt numbering scheme is defined in the - * interrupt controller spec. To wit: - * - * Interrupts 0-15 are IPI - * 16-28 are reserved - * 29-31 are local. We allow 30 to be used for the watchdog. - * 32-1020 are global - * 1021-1022 are reserved - * 1023 is "spurious" (no interrupt) - * - * For now, we ignore all local interrupts so only return an interrupt if it's - * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs. - * - * A simple read from the controller will tell us the number of the highest - * priority enabled interrupt. We then just need to check whether it is in the - * valid range for an IRQ (30-1020 inclusive). - */ - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */ - - ldr \tmp, =1021 - - bic \irqnr, \irqstat, #0x1c00 - - cmp \irqnr, #29 - cmpcc \irqnr, \irqnr - cmpne \irqnr, \tmp - cmpcs \irqnr, \irqnr - addne \irqnr, \irqnr, #32 - - .endm - - /* We assume that irqstat (the raw value of the IRQ acknowledge - * register) is preserved from the macro above. - * If there is an IPI, we immediately signal end of interrupt on the - * controller, since this requires the original irqstat value which - * we won't easily be able to recreate later. - */ - - .macro test_for_ipi, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - cmp \irqnr, #16 - strcc \irqstat, [\base, #GIC_CPU_EOI] - cmpcs \irqnr, \irqnr - .endm - - /* As above, this assumes that irqstat and base are preserved.. */ - - .macro test_for_ltirq, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - mov \tmp, #0 - cmp \irqnr, #29 - moveq \tmp, #1 - streq \irqstat, [\base, #GIC_CPU_EOI] - cmp \tmp, #0 - .endm diff --git a/arch/arm/mach-s5pv310/include/mach/gpio.h b/arch/arm/mach-s5pv310/include/mach/gpio.h deleted file mode 100644 index 20cb80c2346..00000000000 --- a/arch/arm/mach-s5pv310/include/mach/gpio.h +++ /dev/null @@ -1,135 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/gpio.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5PV310 - GPIO lib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H __FILE__ - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - -/* Practically, GPIO banks upto GPZ are the configurable gpio banks */ - -/* GPIO bank sizes */ -#define S5PV310_GPIO_A0_NR (8) -#define S5PV310_GPIO_A1_NR (6) -#define S5PV310_GPIO_B_NR (8) -#define S5PV310_GPIO_C0_NR (5) -#define S5PV310_GPIO_C1_NR (5) -#define S5PV310_GPIO_D0_NR (4) -#define S5PV310_GPIO_D1_NR (4) -#define S5PV310_GPIO_E0_NR (5) -#define S5PV310_GPIO_E1_NR (8) -#define S5PV310_GPIO_E2_NR (6) -#define S5PV310_GPIO_E3_NR (8) -#define S5PV310_GPIO_E4_NR (8) -#define S5PV310_GPIO_F0_NR (8) -#define S5PV310_GPIO_F1_NR (8) -#define S5PV310_GPIO_F2_NR (8) -#define S5PV310_GPIO_F3_NR (6) -#define S5PV310_GPIO_J0_NR (8) -#define S5PV310_GPIO_J1_NR (5) -#define S5PV310_GPIO_K0_NR (7) -#define S5PV310_GPIO_K1_NR (7) -#define S5PV310_GPIO_K2_NR (7) -#define S5PV310_GPIO_K3_NR (7) -#define S5PV310_GPIO_L0_NR (8) -#define S5PV310_GPIO_L1_NR (3) -#define S5PV310_GPIO_L2_NR (8) -#define S5PV310_GPIO_X0_NR (8) -#define S5PV310_GPIO_X1_NR (8) -#define S5PV310_GPIO_X2_NR (8) -#define S5PV310_GPIO_X3_NR (8) -#define S5PV310_GPIO_Z_NR (7) - -/* GPIO bank numbers */ - -#define S5PV310_GPIO_NEXT(__gpio) \ - ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) - -enum s5p_gpio_number { - S5PV310_GPIO_A0_START = 0, - S5PV310_GPIO_A1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_A0), - S5PV310_GPIO_B_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_A1), - S5PV310_GPIO_C0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_B), - S5PV310_GPIO_C1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_C0), - S5PV310_GPIO_D0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_C1), - S5PV310_GPIO_D1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_D0), - S5PV310_GPIO_E0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_D1), - S5PV310_GPIO_E1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_E0), - S5PV310_GPIO_E2_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_E1), - S5PV310_GPIO_E3_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_E2), - S5PV310_GPIO_E4_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_E3), - S5PV310_GPIO_F0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_E4), - S5PV310_GPIO_F1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_F0), - S5PV310_GPIO_F2_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_F1), - S5PV310_GPIO_F3_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_F2), - S5PV310_GPIO_J0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_F3), - S5PV310_GPIO_J1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_J0), - S5PV310_GPIO_K0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_J1), - S5PV310_GPIO_K1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_K0), - S5PV310_GPIO_K2_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_K1), - S5PV310_GPIO_K3_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_K2), - S5PV310_GPIO_L0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_K3), - S5PV310_GPIO_L1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_L0), - S5PV310_GPIO_L2_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_L1), - S5PV310_GPIO_X0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_L2), - S5PV310_GPIO_X1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_X0), - S5PV310_GPIO_X2_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_X1), - S5PV310_GPIO_X3_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_X2), - S5PV310_GPIO_Z_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_X3), -}; - -/* S5PV310 GPIO number definitions */ -#define S5PV310_GPA0(_nr) (S5PV310_GPIO_A0_START + (_nr)) -#define S5PV310_GPA1(_nr) (S5PV310_GPIO_A1_START + (_nr)) -#define S5PV310_GPB(_nr) (S5PV310_GPIO_B_START + (_nr)) -#define S5PV310_GPC0(_nr) (S5PV310_GPIO_C0_START + (_nr)) -#define S5PV310_GPC1(_nr) (S5PV310_GPIO_C1_START + (_nr)) -#define S5PV310_GPD0(_nr) (S5PV310_GPIO_D0_START + (_nr)) -#define S5PV310_GPD1(_nr) (S5PV310_GPIO_D1_START + (_nr)) -#define S5PV310_GPE0(_nr) (S5PV310_GPIO_E0_START + (_nr)) -#define S5PV310_GPE1(_nr) (S5PV310_GPIO_E1_START + (_nr)) -#define S5PV310_GPE2(_nr) (S5PV310_GPIO_E2_START + (_nr)) -#define S5PV310_GPE3(_nr) (S5PV310_GPIO_E3_START + (_nr)) -#define S5PV310_GPE4(_nr) (S5PV310_GPIO_E4_START + (_nr)) -#define S5PV310_GPF0(_nr) (S5PV310_GPIO_F0_START + (_nr)) -#define S5PV310_GPF1(_nr) (S5PV310_GPIO_F1_START + (_nr)) -#define S5PV310_GPF2(_nr) (S5PV310_GPIO_F2_START + (_nr)) -#define S5PV310_GPF3(_nr) (S5PV310_GPIO_F3_START + (_nr)) -#define S5PV310_GPJ0(_nr) (S5PV310_GPIO_J0_START + (_nr)) -#define S5PV310_GPJ1(_nr) (S5PV310_GPIO_J1_START + (_nr)) -#define S5PV310_GPK0(_nr) (S5PV310_GPIO_K0_START + (_nr)) -#define S5PV310_GPK1(_nr) (S5PV310_GPIO_K1_START + (_nr)) -#define S5PV310_GPK2(_nr) (S5PV310_GPIO_K2_START + (_nr)) -#define S5PV310_GPK3(_nr) (S5PV310_GPIO_K3_START + (_nr)) -#define S5PV310_GPL0(_nr) (S5PV310_GPIO_L0_START + (_nr)) -#define S5PV310_GPL1(_nr) (S5PV310_GPIO_L1_START + (_nr)) -#define S5PV310_GPL2(_nr) (S5PV310_GPIO_L2_START + (_nr)) -#define S5PV310_GPX0(_nr) (S5PV310_GPIO_X0_START + (_nr)) -#define S5PV310_GPX1(_nr) (S5PV310_GPIO_X1_START + (_nr)) -#define S5PV310_GPX2(_nr) (S5PV310_GPIO_X2_START + (_nr)) -#define S5PV310_GPX3(_nr) (S5PV310_GPIO_X3_START + (_nr)) -#define S5PV310_GPZ(_nr) (S5PV310_GPIO_Z_START + (_nr)) - -/* the end of the S5PV310 specific gpios */ -#define S5PV310_GPIO_END (S5PV310_GPZ(S5PV310_GPIO_Z_NR) + 1) -#define S3C_GPIO_END S5PV310_GPIO_END - -/* define the number of gpios we need to the one after the GPZ() range */ -#define ARCH_NR_GPIOS (S5PV310_GPZ(S5PV310_GPIO_Z_NR) + \ - CONFIG_SAMSUNG_GPIO_EXTRA + 1) - -#include - -#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/hardware.h b/arch/arm/mach-s5pv310/include/mach/hardware.h deleted file mode 100644 index 28ff9881f1a..00000000000 --- a/arch/arm/mach-s5pv310/include/mach/hardware.h +++ /dev/null @@ -1,18 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/hardware.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5PV310 - Hardware support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H __FILE__ - -/* currently nothing here, placeholder */ - -#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/io.h b/arch/arm/mach-s5pv310/include/mach/io.h deleted file mode 100644 index 8a7f9128391..00000000000 --- a/arch/arm/mach-s5pv310/include/mach/io.h +++ /dev/null @@ -1,26 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/io.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Copyright 2008-2010 Ben Dooks - * - * Based on arch/arm/mach-s5p6442/include/mach/io.h - * - * Default IO routines for S5PV310 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H __FILE__ - -/* No current ISA/PCI bus support. */ -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#define IO_SPACE_LIMIT (0xFFFFFFFF) - -#endif /* __ASM_ARM_ARCH_IO_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/map.h b/arch/arm/mach-s5pv310/include/mach/map.h deleted file mode 100644 index 901657fa7a1..00000000000 --- a/arch/arm/mach-s5pv310/include/mach/map.h +++ /dev/null @@ -1,144 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/map.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5PV310 - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MAP_H -#define __ASM_ARCH_MAP_H __FILE__ - -#include - -/* - * S5PV310 UART offset is 0x10000 but the older S5P SoCs are 0x400. - * So need to define it, and here is to avoid redefinition warning. - */ -#define S3C_UART_OFFSET (0x10000) - -#include - -#define S5PV310_PA_SYSRAM 0x02025000 - -#define S5PV310_PA_I2S0 0x03830000 -#define S5PV310_PA_I2S1 0xE3100000 -#define S5PV310_PA_I2S2 0xE2A00000 - -#define S5PV310_PA_PCM0 0x03840000 -#define S5PV310_PA_PCM1 0x13980000 -#define S5PV310_PA_PCM2 0x13990000 - -#define S5PV310_PA_SROM_BANK(x) (0x04000000 + ((x) * 0x01000000)) - -#define S5PC210_PA_ONENAND 0x0C000000 -#define S5PC210_PA_ONENAND_DMA 0x0C600000 - -#define S5PV310_PA_CHIPID 0x10000000 - -#define S5PV310_PA_SYSCON 0x10010000 -#define S5PV310_PA_PMU 0x10020000 -#define S5PV310_PA_CMU 0x10030000 - -#define S5PV310_PA_WATCHDOG 0x10060000 -#define S5PV310_PA_RTC 0x10070000 - -#define S5PV310_PA_DMC0 0x10400000 - -#define S5PV310_PA_COMBINER 0x10448000 - -#define S5PV310_PA_COREPERI 0x10500000 -#define S5PV310_PA_GIC_CPU 0x10500100 -#define S5PV310_PA_TWD 0x10500600 -#define S5PV310_PA_GIC_DIST 0x10501000 -#define S5PV310_PA_L2CC 0x10502000 - -#define S5PV310_PA_MDMA 0x10810000 -#define S5PV310_PA_PDMA0 0x12680000 -#define S5PV310_PA_PDMA1 0x12690000 - -#define S5PV310_PA_SYSMMU_MDMA 0x10A40000 -#define S5PV310_PA_SYSMMU_SSS 0x10A50000 -#define S5PV310_PA_SYSMMU_FIMC0 0x11A20000 -#define S5PV310_PA_SYSMMU_FIMC1 0x11A30000 -#define S5PV310_PA_SYSMMU_FIMC2 0x11A40000 -#define S5PV310_PA_SYSMMU_FIMC3 0x11A50000 -#define S5PV310_PA_SYSMMU_JPEG 0x11A60000 -#define S5PV310_PA_SYSMMU_FIMD0 0x11E20000 -#define S5PV310_PA_SYSMMU_FIMD1 0x12220000 -#define S5PV310_PA_SYSMMU_PCIe 0x12620000 -#define S5PV310_PA_SYSMMU_G2D 0x12A20000 -#define S5PV310_PA_SYSMMU_ROTATOR 0x12A30000 -#define S5PV310_PA_SYSMMU_MDMA2 0x12A40000 -#define S5PV310_PA_SYSMMU_TV 0x12E20000 -#define S5PV310_PA_SYSMMU_MFC_L 0x13620000 -#define S5PV310_PA_SYSMMU_MFC_R 0x13630000 - -#define S5PV310_PA_GPIO1 0x11400000 -#define S5PV310_PA_GPIO2 0x11000000 -#define S5PV310_PA_GPIO3 0x03860000 - -#define S5PV310_PA_MIPI_CSIS0 0x11880000 -#define S5PV310_PA_MIPI_CSIS1 0x11890000 - -#define S5PV310_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000)) - -#define S5PV310_PA_SROMC 0x12570000 - -#define S5PV310_PA_UART 0x13800000 - -#define S5PV310_PA_IIC(x) (0x13860000 + ((x) * 0x10000)) - -#define S5PV310_PA_AC97 0x139A0000 - -#define S5PV310_PA_TIMER 0x139D0000 - -#define S5PV310_PA_SDRAM 0x40000000 - -#define S5PV310_PA_SPDIF 0xE1100000 - -/* Compatibiltiy Defines */ - -#define S3C_PA_HSMMC0 S5PV310_PA_HSMMC(0) -#define S3C_PA_HSMMC1 S5PV310_PA_HSMMC(1) -#define S3C_PA_HSMMC2 S5PV310_PA_HSMMC(2) -#define S3C_PA_HSMMC3 S5PV310_PA_HSMMC(3) -#define S3C_PA_IIC S5PV310_PA_IIC(0) -#define S3C_PA_IIC1 S5PV310_PA_IIC(1) -#define S3C_PA_IIC2 S5PV310_PA_IIC(2) -#define S3C_PA_IIC3 S5PV310_PA_IIC(3) -#define S3C_PA_IIC4 S5PV310_PA_IIC(4) -#define S3C_PA_IIC5 S5PV310_PA_IIC(5) -#define S3C_PA_IIC6 S5PV310_PA_IIC(6) -#define S3C_PA_IIC7 S5PV310_PA_IIC(7) -#define S3C_PA_RTC S5PV310_PA_RTC -#define S3C_PA_WDT S5PV310_PA_WATCHDOG - -#define S5P_PA_CHIPID S5PV310_PA_CHIPID -#define S5P_PA_MIPI_CSIS0 S5PV310_PA_MIPI_CSIS0 -#define S5P_PA_MIPI_CSIS1 S5PV310_PA_MIPI_CSIS1 -#define S5P_PA_ONENAND S5PC210_PA_ONENAND -#define S5P_PA_ONENAND_DMA S5PC210_PA_ONENAND_DMA -#define S5P_PA_SDRAM S5PV310_PA_SDRAM -#define S5P_PA_SROMC S5PV310_PA_SROMC -#define S5P_PA_SYSCON S5PV310_PA_SYSCON -#define S5P_PA_TIMER S5PV310_PA_TIMER - -/* UART */ - -#define S3C_PA_UART S5PV310_PA_UART - -#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET)) -#define S5P_PA_UART0 S5P_PA_UART(0) -#define S5P_PA_UART1 S5P_PA_UART(1) -#define S5P_PA_UART2 S5P_PA_UART(2) -#define S5P_PA_UART3 S5P_PA_UART(3) -#define S5P_PA_UART4 S5P_PA_UART(4) - -#define S5P_SZ_UART SZ_256 - -#endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/memory.h b/arch/arm/mach-s5pv310/include/mach/memory.h deleted file mode 100644 index 1dffb482324..00000000000 --- a/arch/arm/mach-s5pv310/include/mach/memory.h +++ /dev/null @@ -1,22 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/memory.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5PV310 - Memory definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H __FILE__ - -#define PHYS_OFFSET UL(0x40000000) - -/* Maximum of 256MiB in one bank */ -#define MAX_PHYSMEM_BITS 32 -#define SECTION_SIZE_BITS 28 - -#endif /* __ASM_ARCH_MEMORY_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/regs-gpio.h b/arch/arm/mach-s5pv310/include/mach/regs-gpio.h deleted file mode 100644 index 82e9e0c9d45..00000000000 --- a/arch/arm/mach-s5pv310/include/mach/regs-gpio.h +++ /dev/null @@ -1,42 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/regs-gpio.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5PV310 - GPIO (including EINT) register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_GPIO_H -#define __ASM_ARCH_REGS_GPIO_H __FILE__ - -#include -#include - -#define S5PV310_EINT40CON (S5P_VA_GPIO2 + 0xE00) -#define S5P_EINT_CON(x) (S5PV310_EINT40CON + ((x) * 0x4)) - -#define S5PV310_EINT40FLTCON0 (S5P_VA_GPIO2 + 0xE80) -#define S5P_EINT_FLTCON(x) (S5PV310_EINT40FLTCON0 + ((x) * 0x4)) - -#define S5PV310_EINT40MASK (S5P_VA_GPIO2 + 0xF00) -#define S5P_EINT_MASK(x) (S5PV310_EINT40MASK + ((x) * 0x4)) - -#define S5PV310_EINT40PEND (S5P_VA_GPIO2 + 0xF40) -#define S5P_EINT_PEND(x) (S5PV310_EINT40PEND + ((x) * 0x4)) - -#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3) - -#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7)) - -#define EINT_MODE S3C_GPIO_SFN(0xf) - -#define EINT_GPIO_0(x) S5PV310_GPX0(x) -#define EINT_GPIO_1(x) S5PV310_GPX1(x) -#define EINT_GPIO_2(x) S5PV310_GPX2(x) -#define EINT_GPIO_3(x) S5PV310_GPX3(x) - -#endif /* __ASM_ARCH_REGS_GPIO_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/regs-mem.h b/arch/arm/mach-s5pv310/include/mach/regs-mem.h deleted file mode 100644 index 834227140ea..00000000000 --- a/arch/arm/mach-s5pv310/include/mach/regs-mem.h +++ /dev/null @@ -1,23 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/regs-mem.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5PV310 - SROMC and DMC register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_MEM_H -#define __ASM_ARCH_REGS_MEM_H __FILE__ - -#include - -#define S5P_DMC0_MEMCON_OFFSET 0x04 - -#define S5P_DMC0_MEMTYPE_SHIFT 8 -#define S5P_DMC0_MEMTYPE_MASK 0xF - -#endif /* __ASM_ARCH_REGS_MEM_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/regs-pmu.h b/arch/arm/mach-s5pv310/include/mach/regs-pmu.h deleted file mode 100644 index fb333d0f607..00000000000 --- a/arch/arm/mach-s5pv310/include/mach/regs-pmu.h +++ /dev/null @@ -1,30 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/regs-pmu.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5PV310 - Power management unit definition - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_PMU_H -#define __ASM_ARCH_REGS_PMU_H __FILE__ - -#include - -#define S5P_PMUREG(x) (S5P_VA_PMU + (x)) - -#define S5P_PMU_CAM_CONF S5P_PMUREG(0x3C00) -#define S5P_PMU_TV_CONF S5P_PMUREG(0x3C20) -#define S5P_PMU_MFC_CONF S5P_PMUREG(0x3C40) -#define S5P_PMU_G3D_CONF S5P_PMUREG(0x3C60) -#define S5P_PMU_LCD0_CONF S5P_PMUREG(0x3C80) -#define S5P_PMU_LCD1_CONF S5P_PMUREG(0x3CA0) -#define S5P_PMU_GPS_CONF S5P_PMUREG(0x3CE0) - -#define S5P_INT_LOCAL_PWR_EN 0x7 - -#endif /* __ASM_ARCH_REGS_PMU_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/regs-sysmmu.h b/arch/arm/mach-s5pv310/include/mach/regs-sysmmu.h deleted file mode 100644 index 0b28e81a16f..00000000000 --- a/arch/arm/mach-s5pv310/include/mach/regs-sysmmu.h +++ /dev/null @@ -1,24 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/regs-sysmmu.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5PV310 - System MMU register - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_SYSMMU_H -#define __ASM_ARCH_REGS_SYSMMU_H __FILE__ - -#define S5P_MMU_CTRL 0x000 -#define S5P_MMU_CFG 0x004 -#define S5P_MMU_STATUS 0x008 -#define S5P_MMU_FLUSH 0x00C -#define S5P_PT_BASE_ADDR 0x014 -#define S5P_INT_STATUS 0x018 -#define S5P_PAGE_FAULT_ADDR 0x024 - -#endif /* __ASM_ARCH_REGS_SYSMMU_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/smp.h b/arch/arm/mach-s5pv310/include/mach/smp.h deleted file mode 100644 index 393ccbd52c4..00000000000 --- a/arch/arm/mach-s5pv310/include/mach/smp.h +++ /dev/null @@ -1,19 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/smp.h - * - * Cloned from arch/arm/mach-realview/include/mach/smp.h -*/ - -#ifndef ASM_ARCH_SMP_H -#define ASM_ARCH_SMP_H __FILE__ - -#include - -/* - * We use IRQ1 as the IPI - */ -static inline void smp_cross_call(const struct cpumask *mask, int ipi) -{ - gic_raise_softirq(mask, ipi); -} - -#endif diff --git a/arch/arm/mach-s5pv310/include/mach/sysmmu.h b/arch/arm/mach-s5pv310/include/mach/sysmmu.h deleted file mode 100644 index 598fc5c9211..00000000000 --- a/arch/arm/mach-s5pv310/include/mach/sysmmu.h +++ /dev/null @@ -1,122 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/sysmmu.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Samsung sysmmu driver for S5PV310 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARM_ARCH_SYSMMU_H -#define __ASM_ARM_ARCH_SYSMMU_H __FILE__ - -#define S5PV310_SYSMMU_TOTAL_IPNUM 16 -#define S5P_SYSMMU_TOTAL_IPNUM S5PV310_SYSMMU_TOTAL_IPNUM - -enum s5pv310_sysmmu_ips { - SYSMMU_MDMA, - SYSMMU_SSS, - SYSMMU_FIMC0, - SYSMMU_FIMC1, - SYSMMU_FIMC2, - SYSMMU_FIMC3, - SYSMMU_JPEG, - SYSMMU_FIMD0, - SYSMMU_FIMD1, - SYSMMU_PCIe, - SYSMMU_G2D, - SYSMMU_ROTATOR, - SYSMMU_MDMA2, - SYSMMU_TV, - SYSMMU_MFC_L, - SYSMMU_MFC_R, -}; - -static char *sysmmu_ips_name[S5PV310_SYSMMU_TOTAL_IPNUM] = { - "SYSMMU_MDMA" , - "SYSMMU_SSS" , - "SYSMMU_FIMC0" , - "SYSMMU_FIMC1" , - "SYSMMU_FIMC2" , - "SYSMMU_FIMC3" , - "SYSMMU_JPEG" , - "SYSMMU_FIMD0" , - "SYSMMU_FIMD1" , - "SYSMMU_PCIe" , - "SYSMMU_G2D" , - "SYSMMU_ROTATOR", - "SYSMMU_MDMA2" , - "SYSMMU_TV" , - "SYSMMU_MFC_L" , - "SYSMMU_MFC_R" , -}; - -typedef enum s5pv310_sysmmu_ips sysmmu_ips; - -struct sysmmu_tt_info { - unsigned long *pgd; - unsigned long pgd_paddr; - unsigned long *pte; -}; - -struct sysmmu_controller { - const char *name; - - /* channels registers */ - void __iomem *regs; - - /* channel irq */ - unsigned int irq; - - sysmmu_ips ips; - - /* Translation Table Info. */ - struct sysmmu_tt_info *tt_info; - - struct resource *mem; - struct device *dev; - - /* SysMMU controller enable - true : enable */ - bool enable; -}; - -/** - * s5p_sysmmu_enable() - enable system mmu of ip - * @ips: The ip connected system mmu. - * - * This function enable system mmu to transfer address - * from virtual address to physical address - */ -int s5p_sysmmu_enable(sysmmu_ips ips); - -/** - * s5p_sysmmu_disable() - disable sysmmu mmu of ip - * @ips: The ip connected system mmu. - * - * This function disable system mmu to transfer address - * from virtual address to physical address - */ -int s5p_sysmmu_disable(sysmmu_ips ips); - -/** - * s5p_sysmmu_set_tablebase_pgd() - set page table base address to refer page table - * @ips: The ip connected system mmu. - * @pgd: The page table base address. - * - * This function set page table base address - * When system mmu transfer address from virtaul address to physical address, - * system mmu refer address information from page table - */ -int s5p_sysmmu_set_tablebase_pgd(sysmmu_ips ips, unsigned long pgd); - -/** - * s5p_sysmmu_tlb_invalidate() - flush all TLB entry in system mmu - * @ips: The ip connected system mmu. - * - * This function flush all TLB entry in system mmu - */ -int s5p_sysmmu_tlb_invalidate(sysmmu_ips ips); -#endif /* __ASM_ARM_ARCH_SYSMMU_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/system.h b/arch/arm/mach-s5pv310/include/mach/system.h deleted file mode 100644 index d10c009cf0f..00000000000 --- a/arch/arm/mach-s5pv310/include/mach/system.h +++ /dev/null @@ -1,22 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/system.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5PV310 - system support header - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H __FILE__ - -#include - -static void arch_idle(void) -{ - /* nothing here yet */ -} -#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/timex.h b/arch/arm/mach-s5pv310/include/mach/timex.h deleted file mode 100644 index bd2359b952b..00000000000 --- a/arch/arm/mach-s5pv310/include/mach/timex.h +++ /dev/null @@ -1,29 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/timex.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Copyright (c) 2003-2010 Simtec Electronics - * Ben Dooks - * - * Based on arch/arm/mach-s5p6442/include/mach/timex.h - * - * S5PV310 - time parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H __FILE__ - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it - * a variable is useless. It seems as long as we make our timers an - * exact multiple of HZ, any value that makes a 1->1 correspondence - * for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/uncompress.h b/arch/arm/mach-s5pv310/include/mach/uncompress.h deleted file mode 100644 index 59593c1e241..00000000000 --- a/arch/arm/mach-s5pv310/include/mach/uncompress.h +++ /dev/null @@ -1,30 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/uncompress.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5PV310 - uncompress code - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H __FILE__ - -#include -#include - -static void arch_detect_cpu(void) -{ - /* we do not need to do any cpu detection here at the moment. */ - - /* - * For preventing FIFO overrun or infinite loop of UART console, - * fifo_max should be the minimum fifo size of all of the UART channels - */ - fifo_mask = S5PV210_UFSTAT_TXMASK; - fifo_max = 15 << S5PV210_UFSTAT_TXSHIFT; -} -#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/vmalloc.h b/arch/arm/mach-s5pv310/include/mach/vmalloc.h deleted file mode 100644 index 65759fb9758..00000000000 --- a/arch/arm/mach-s5pv310/include/mach/vmalloc.h +++ /dev/null @@ -1,22 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/vmalloc.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Copyright 2010 Ben Dooks - * - * Based on arch/arm/mach-s5p6440/include/mach/vmalloc.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S5PV310 vmalloc definition -*/ - -#ifndef __ASM_ARCH_VMALLOC_H -#define __ASM_ARCH_VMALLOC_H __FILE__ - -#define VMALLOC_END 0xF6000000UL - -#endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-s5pv310/init.c b/arch/arm/mach-s5pv310/init.c deleted file mode 100644 index 182dcf42cfb..00000000000 --- a/arch/arm/mach-s5pv310/init.c +++ /dev/null @@ -1,41 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/init.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include - -#include -#include -#include - -static struct s3c24xx_uart_clksrc s5pv310_serial_clocks[] = { - [0] = { - .name = "uclk1", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, -}; - -/* uart registration process */ -void __init s5pv310_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - struct s3c2410_uartcfg *tcfg = cfg; - u32 ucnt; - - for (ucnt = 0; ucnt < no; ucnt++, tcfg++) { - if (!tcfg->clocks) { - tcfg->has_fracval = 1; - tcfg->clocks = s5pv310_serial_clocks; - tcfg->clocks_size = ARRAY_SIZE(s5pv310_serial_clocks); - } - } - - s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no); -} diff --git a/arch/arm/mach-s5pv310/platsmp.c b/arch/arm/mach-s5pv310/platsmp.c deleted file mode 100644 index 34093b069f6..00000000000 --- a/arch/arm/mach-s5pv310/platsmp.c +++ /dev/null @@ -1,172 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/platsmp.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Cloned from linux/arch/arm/mach-vexpress/platsmp.c - * - * Copyright (C) 2002 ARM Ltd. - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include - -extern void s5pv310_secondary_startup(void); - -/* - * control for which core is the next to come out of the secondary - * boot "holding pen" - */ - -volatile int __cpuinitdata pen_release = -1; - -/* - * Write pen_release in a way that is guaranteed to be visible to all - * observers, irrespective of whether they're taking part in coherency - * or not. This is necessary for the hotplug code to work reliably. - */ -static void write_pen_release(int val) -{ - pen_release = val; - smp_wmb(); - __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release)); - outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1)); -} - -static void __iomem *scu_base_addr(void) -{ - return (void __iomem *)(S5P_VA_SCU); -} - -static DEFINE_SPINLOCK(boot_lock); - -void __cpuinit platform_secondary_init(unsigned int cpu) -{ - /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* - * let the primary processor know we're out of the - * pen, then head off into the C entry point - */ - write_pen_release(-1); - - /* - * Synchronise with the boot thread. - */ - spin_lock(&boot_lock); - spin_unlock(&boot_lock); -} - -int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) -{ - unsigned long timeout; - - /* - * Set synchronisation state between this boot processor - * and the secondary one - */ - spin_lock(&boot_lock); - - /* - * The secondary processor is waiting to be released from - * the holding pen - release it, then wait for it to flag - * that it has been released by resetting pen_release. - * - * Note that "pen_release" is the hardware CPU ID, whereas - * "cpu" is Linux's internal ID. - */ - write_pen_release(cpu); - - /* - * Send the secondary CPU a soft interrupt, thereby causing - * the boot monitor to read the system wide flags register, - * and branch to the address found there. - */ - smp_cross_call(cpumask_of(cpu), 1); - - timeout = jiffies + (1 * HZ); - while (time_before(jiffies, timeout)) { - smp_rmb(); - if (pen_release == -1) - break; - - udelay(10); - } - - /* - * now the secondary core is starting up let it run its - * calibrations, then wait for it to finish - */ - spin_unlock(&boot_lock); - - return pen_release != -1 ? -ENOSYS : 0; -} - -/* - * Initialise the CPU possible map early - this describes the CPUs - * which may be present or become present in the system. - */ - -void __init smp_init_cpus(void) -{ - void __iomem *scu_base = scu_base_addr(); - unsigned int i, ncores; - - ncores = scu_base ? scu_get_core_count(scu_base) : 1; - - /* sanity check */ - if (ncores > NR_CPUS) { - printk(KERN_WARNING - "S5PV310: no. of cores (%d) greater than configured " - "maximum of %d - clipping\n", - ncores, NR_CPUS); - ncores = NR_CPUS; - } - - for (i = 0; i < ncores; i++) - set_cpu_possible(i, true); -} - -void __init platform_smp_prepare_cpus(unsigned int max_cpus) -{ - int i; - - /* - * Initialise the present map, which describes the set of CPUs - * actually populated at the present time. - */ - for (i = 0; i < max_cpus; i++) - set_cpu_present(i, true); - - scu_enable(scu_base_addr()); - - /* - * Write the address of secondary startup into the - * system-wide flags register. The boot monitor waits - * until it receives a soft interrupt, and then the - * secondary CPU branches to this address. - */ - __raw_writel(BSYM(virt_to_phys(s5pv310_secondary_startup)), S5P_VA_SYSRAM); -} diff --git a/arch/arm/mach-s5pv310/setup-i2c0.c b/arch/arm/mach-s5pv310/setup-i2c0.c deleted file mode 100644 index f47f8f3152e..00000000000 --- a/arch/arm/mach-s5pv310/setup-i2c0.c +++ /dev/null @@ -1,26 +0,0 @@ -/* - * linux/arch/arm/mach-s5pv310/setup-i2c0.c - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * I2C0 GPIO configuration. - * - * Based on plat-s3c64xx/setup-i2c0.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -struct platform_device; /* don't need the contents */ - -#include -#include -#include - -void s3c_i2c0_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(S5PV310_GPD1(0), 2, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); -} diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c index 047d31c1bbd..c3bfe9b13ac 100644 --- a/arch/arm/plat-s5p/cpu.c +++ b/arch/arm/plat-s5p/cpu.c @@ -1,7 +1,7 @@ /* linux/arch/arm/plat-s5p/cpu.c * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * S5P CPU Support * @@ -12,17 +12,20 @@ #include #include -#include + #include #include + +#include #include + #include #include #include #include #include #include -#include +#include /* table of supported CPUs */ @@ -31,7 +34,7 @@ static const char name_s5p6442[] = "S5P6442"; static const char name_s5p6450[] = "S5P6450"; static const char name_s5pc100[] = "S5PC100"; static const char name_s5pv210[] = "S5PV210/S5PC110"; -static const char name_s5pv310[] = "S5PV310"; +static const char name_exynos4210[] = "EXYNOS4210"; static struct cpu_table cpu_ids[] __initdata = { { @@ -75,13 +78,13 @@ static struct cpu_table cpu_ids[] __initdata = { .init = s5pv210_init, .name = name_s5pv210, }, { - .idcode = 0x43200000, + .idcode = 0x43210000, .idmask = 0xfffff000, - .map_io = s5pv310_map_io, - .init_clocks = s5pv310_init_clocks, - .init_uarts = s5pv310_init_uarts, - .init = s5pv310_init, - .name = name_s5pv310, + .map_io = exynos4_map_io, + .init_clocks = exynos4_init_clocks, + .init_uarts = exynos4_init_uarts, + .init = exynos4_init, + .name = name_exynos4210, }, }; diff --git a/arch/arm/plat-s5p/include/plat/exynos4.h b/arch/arm/plat-s5p/include/plat/exynos4.h new file mode 100644 index 00000000000..907caab53dc --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/exynos4.h @@ -0,0 +1,34 @@ +/* linux/arch/arm/plat-s5p/include/plat/exynos4.h + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Header file for exynos4 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* Common init code for EXYNOS4 related SoCs */ + +extern void exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); +extern void exynos4_register_clocks(void); +extern void exynos4_setup_clocks(void); + +#ifdef CONFIG_CPU_EXYNOS4210 + +extern int exynos4_init(void); +extern void exynos4_init_irq(void); +extern void exynos4_map_io(void); +extern void exynos4_init_clocks(int xtal); +extern struct sys_timer exynos4_timer; + +#define exynos4_init_uarts exynos4_common_init_uarts + +#else +#define exynos4_init_clocks NULL +#define exynos4_init_uarts NULL +#define exynos4_map_io NULL +#define exynos4_init NULL +#endif diff --git a/arch/arm/plat-s5p/include/plat/s5pv310.h b/arch/arm/plat-s5p/include/plat/s5pv310.h deleted file mode 100644 index 769c991ceb3..00000000000 --- a/arch/arm/plat-s5p/include/plat/s5pv310.h +++ /dev/null @@ -1,34 +0,0 @@ -/* linux/arch/arm/plat-s5p/include/plat/s5pv310.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Header file for s5pv310 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* Common init code for S5PV310 related SoCs */ - -extern void s5pv310_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); -extern void s5pv310_register_clocks(void); -extern void s5pv310_setup_clocks(void); - -#ifdef CONFIG_CPU_S5PV310 - -extern int s5pv310_init(void); -extern void s5pv310_init_irq(void); -extern void s5pv310_map_io(void); -extern void s5pv310_init_clocks(int xtal); -extern struct sys_timer s5pv310_timer; - -#define s5pv310_init_uarts s5pv310_common_init_uarts - -#else -#define s5pv310_init_clocks NULL -#define s5pv310_init_uarts NULL -#define s5pv310_map_io NULL -#define s5pv310_init NULL -#endif -- cgit v1.2.3-18-g5258 From b3ed3a174c419702eddf9fb28636f6e4baa29d03 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Mon, 14 Feb 2011 16:08:04 +0900 Subject: ARM: EXYNOS4: Update Clock part This patch updates Clock part of EXYNOS4 according to the change of ARCH name, EXYNOS4. Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos4/clock.c | 1122 +++++++++++++++++++++++ arch/arm/mach-exynos4/include/mach/regs-clock.h | 167 ++++ arch/arm/mach-s5pv310/clock.c | 1122 ----------------------- arch/arm/mach-s5pv310/include/mach/regs-clock.h | 167 ---- 4 files changed, 1289 insertions(+), 1289 deletions(-) create mode 100644 arch/arm/mach-exynos4/clock.c create mode 100644 arch/arm/mach-exynos4/include/mach/regs-clock.h delete mode 100644 arch/arm/mach-s5pv310/clock.c delete mode 100644 arch/arm/mach-s5pv310/include/mach/regs-clock.h (limited to 'arch') diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos4/clock.c new file mode 100644 index 00000000000..72d53d5e54a --- /dev/null +++ b/arch/arm/mach-exynos4/clock.c @@ -0,0 +1,1122 @@ +/* linux/arch/arm/mach-exynos4/clock.c + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4 - Clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include +#include + +static struct clk clk_sclk_hdmi27m = { + .name = "sclk_hdmi27m", + .id = -1, + .rate = 27000000, +}; + +static struct clk clk_sclk_hdmiphy = { + .name = "sclk_hdmiphy", + .id = -1, +}; + +static struct clk clk_sclk_usbphy0 = { + .name = "sclk_usbphy0", + .id = -1, + .rate = 27000000, +}; + +static struct clk clk_sclk_usbphy1 = { + .name = "sclk_usbphy1", + .id = -1, +}; + +static int exynos4_clksrc_mask_top_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKSRC_MASK_TOP, clk, enable); +} + +static int exynos4_clksrc_mask_cam_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKSRC_MASK_CAM, clk, enable); +} + +static int exynos4_clksrc_mask_lcd0_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKSRC_MASK_LCD0, clk, enable); +} + +static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable); +} + +static int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKSRC_MASK_FSYS, clk, enable); +} + +static int exynos4_clksrc_mask_peril0_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKSRC_MASK_PERIL0, clk, enable); +} + +static int exynos4_clksrc_mask_peril1_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKSRC_MASK_PERIL1, clk, enable); +} + +static int exynos4_clk_ip_cam_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKGATE_IP_CAM, clk, enable); +} + +static int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKGATE_IP_IMAGE, clk, enable); +} + +static int exynos4_clk_ip_lcd0_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKGATE_IP_LCD0, clk, enable); +} + +static int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKGATE_IP_LCD1, clk, enable); +} + +static int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKGATE_IP_FSYS, clk, enable); +} + +static int exynos4_clk_ip_peril_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKGATE_IP_PERIL, clk, enable); +} + +static int exynos4_clk_ip_perir_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKGATE_IP_PERIR, clk, enable); +} + +/* Core list of CMU_CPU side */ + +static struct clksrc_clk clk_mout_apll = { + .clk = { + .name = "mout_apll", + .id = -1, + }, + .sources = &clk_src_apll, + .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 0, .size = 1 }, +}; + +static struct clksrc_clk clk_sclk_apll = { + .clk = { + .name = "sclk_apll", + .id = -1, + .parent = &clk_mout_apll.clk, + }, + .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 24, .size = 3 }, +}; + +static struct clksrc_clk clk_mout_epll = { + .clk = { + .name = "mout_epll", + .id = -1, + }, + .sources = &clk_src_epll, + .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 4, .size = 1 }, +}; + +static struct clksrc_clk clk_mout_mpll = { + .clk = { + .name = "mout_mpll", + .id = -1, + }, + .sources = &clk_src_mpll, + .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 8, .size = 1 }, +}; + +static struct clk *clkset_moutcore_list[] = { + [0] = &clk_mout_apll.clk, + [1] = &clk_mout_mpll.clk, +}; + +static struct clksrc_sources clkset_moutcore = { + .sources = clkset_moutcore_list, + .nr_sources = ARRAY_SIZE(clkset_moutcore_list), +}; + +static struct clksrc_clk clk_moutcore = { + .clk = { + .name = "moutcore", + .id = -1, + }, + .sources = &clkset_moutcore, + .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 16, .size = 1 }, +}; + +static struct clksrc_clk clk_coreclk = { + .clk = { + .name = "core_clk", + .id = -1, + .parent = &clk_moutcore.clk, + }, + .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 0, .size = 3 }, +}; + +static struct clksrc_clk clk_armclk = { + .clk = { + .name = "armclk", + .id = -1, + .parent = &clk_coreclk.clk, + }, +}; + +static struct clksrc_clk clk_aclk_corem0 = { + .clk = { + .name = "aclk_corem0", + .id = -1, + .parent = &clk_coreclk.clk, + }, + .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 4, .size = 3 }, +}; + +static struct clksrc_clk clk_aclk_cores = { + .clk = { + .name = "aclk_cores", + .id = -1, + .parent = &clk_coreclk.clk, + }, + .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 4, .size = 3 }, +}; + +static struct clksrc_clk clk_aclk_corem1 = { + .clk = { + .name = "aclk_corem1", + .id = -1, + .parent = &clk_coreclk.clk, + }, + .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 8, .size = 3 }, +}; + +static struct clksrc_clk clk_periphclk = { + .clk = { + .name = "periphclk", + .id = -1, + .parent = &clk_coreclk.clk, + }, + .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 12, .size = 3 }, +}; + +/* Core list of CMU_CORE side */ + +static struct clk *clkset_corebus_list[] = { + [0] = &clk_mout_mpll.clk, + [1] = &clk_sclk_apll.clk, +}; + +static struct clksrc_sources clkset_mout_corebus = { + .sources = clkset_corebus_list, + .nr_sources = ARRAY_SIZE(clkset_corebus_list), +}; + +static struct clksrc_clk clk_mout_corebus = { + .clk = { + .name = "mout_corebus", + .id = -1, + }, + .sources = &clkset_mout_corebus, + .reg_src = { .reg = S5P_CLKSRC_DMC, .shift = 4, .size = 1 }, +}; + +static struct clksrc_clk clk_sclk_dmc = { + .clk = { + .name = "sclk_dmc", + .id = -1, + .parent = &clk_mout_corebus.clk, + }, + .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 12, .size = 3 }, +}; + +static struct clksrc_clk clk_aclk_cored = { + .clk = { + .name = "aclk_cored", + .id = -1, + .parent = &clk_sclk_dmc.clk, + }, + .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 16, .size = 3 }, +}; + +static struct clksrc_clk clk_aclk_corep = { + .clk = { + .name = "aclk_corep", + .id = -1, + .parent = &clk_aclk_cored.clk, + }, + .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 20, .size = 3 }, +}; + +static struct clksrc_clk clk_aclk_acp = { + .clk = { + .name = "aclk_acp", + .id = -1, + .parent = &clk_mout_corebus.clk, + }, + .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 0, .size = 3 }, +}; + +static struct clksrc_clk clk_pclk_acp = { + .clk = { + .name = "pclk_acp", + .id = -1, + .parent = &clk_aclk_acp.clk, + }, + .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 4, .size = 3 }, +}; + +/* Core list of CMU_TOP side */ + +static struct clk *clkset_aclk_top_list[] = { + [0] = &clk_mout_mpll.clk, + [1] = &clk_sclk_apll.clk, +}; + +static struct clksrc_sources clkset_aclk = { + .sources = clkset_aclk_top_list, + .nr_sources = ARRAY_SIZE(clkset_aclk_top_list), +}; + +static struct clksrc_clk clk_aclk_200 = { + .clk = { + .name = "aclk_200", + .id = -1, + }, + .sources = &clkset_aclk, + .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 12, .size = 1 }, + .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 0, .size = 3 }, +}; + +static struct clksrc_clk clk_aclk_100 = { + .clk = { + .name = "aclk_100", + .id = -1, + }, + .sources = &clkset_aclk, + .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 16, .size = 1 }, + .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 4, .size = 4 }, +}; + +static struct clksrc_clk clk_aclk_160 = { + .clk = { + .name = "aclk_160", + .id = -1, + }, + .sources = &clkset_aclk, + .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 20, .size = 1 }, + .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 8, .size = 3 }, +}; + +static struct clksrc_clk clk_aclk_133 = { + .clk = { + .name = "aclk_133", + .id = -1, + }, + .sources = &clkset_aclk, + .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 24, .size = 1 }, + .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 12, .size = 3 }, +}; + +static struct clk *clkset_vpllsrc_list[] = { + [0] = &clk_fin_vpll, + [1] = &clk_sclk_hdmi27m, +}; + +static struct clksrc_sources clkset_vpllsrc = { + .sources = clkset_vpllsrc_list, + .nr_sources = ARRAY_SIZE(clkset_vpllsrc_list), +}; + +static struct clksrc_clk clk_vpllsrc = { + .clk = { + .name = "vpll_src", + .id = -1, + .enable = exynos4_clksrc_mask_top_ctrl, + .ctrlbit = (1 << 0), + }, + .sources = &clkset_vpllsrc, + .reg_src = { .reg = S5P_CLKSRC_TOP1, .shift = 0, .size = 1 }, +}; + +static struct clk *clkset_sclk_vpll_list[] = { + [0] = &clk_vpllsrc.clk, + [1] = &clk_fout_vpll, +}; + +static struct clksrc_sources clkset_sclk_vpll = { + .sources = clkset_sclk_vpll_list, + .nr_sources = ARRAY_SIZE(clkset_sclk_vpll_list), +}; + +static struct clksrc_clk clk_sclk_vpll = { + .clk = { + .name = "sclk_vpll", + .id = -1, + }, + .sources = &clkset_sclk_vpll, + .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 8, .size = 1 }, +}; + +static struct clk init_clocks_off[] = { + { + .name = "timers", + .id = -1, + .parent = &clk_aclk_100.clk, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1<<24), + }, { + .name = "csis", + .id = 0, + .enable = exynos4_clk_ip_cam_ctrl, + .ctrlbit = (1 << 4), + }, { + .name = "csis", + .id = 1, + .enable = exynos4_clk_ip_cam_ctrl, + .ctrlbit = (1 << 5), + }, { + .name = "fimc", + .id = 0, + .enable = exynos4_clk_ip_cam_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "fimc", + .id = 1, + .enable = exynos4_clk_ip_cam_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "fimc", + .id = 2, + .enable = exynos4_clk_ip_cam_ctrl, + .ctrlbit = (1 << 2), + }, { + .name = "fimc", + .id = 3, + .enable = exynos4_clk_ip_cam_ctrl, + .ctrlbit = (1 << 3), + }, { + .name = "fimd", + .id = 0, + .enable = exynos4_clk_ip_lcd0_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "fimd", + .id = 1, + .enable = exynos4_clk_ip_lcd1_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "hsmmc", + .id = 0, + .parent = &clk_aclk_133.clk, + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 5), + }, { + .name = "hsmmc", + .id = 1, + .parent = &clk_aclk_133.clk, + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 6), + }, { + .name = "hsmmc", + .id = 2, + .parent = &clk_aclk_133.clk, + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 7), + }, { + .name = "hsmmc", + .id = 3, + .parent = &clk_aclk_133.clk, + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 8), + }, { + .name = "hsmmc", + .id = 4, + .parent = &clk_aclk_133.clk, + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 9), + }, { + .name = "sata", + .id = -1, + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 10), + }, { + .name = "pdma", + .id = 0, + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "pdma", + .id = 1, + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "adc", + .id = -1, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 15), + }, { + .name = "rtc", + .id = -1, + .enable = exynos4_clk_ip_perir_ctrl, + .ctrlbit = (1 << 15), + }, { + .name = "watchdog", + .id = -1, + .enable = exynos4_clk_ip_perir_ctrl, + .ctrlbit = (1 << 14), + }, { + .name = "usbhost", + .id = -1, + .enable = exynos4_clk_ip_fsys_ctrl , + .ctrlbit = (1 << 12), + }, { + .name = "otg", + .id = -1, + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 13), + }, { + .name = "spi", + .id = 0, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 16), + }, { + .name = "spi", + .id = 1, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 17), + }, { + .name = "spi", + .id = 2, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 18), + }, { + .name = "iis", + .id = 0, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 19), + }, { + .name = "iis", + .id = 1, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 20), + }, { + .name = "iis", + .id = 2, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 21), + }, { + .name = "ac97", + .id = -1, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 27), + }, { + .name = "fimg2d", + .id = -1, + .enable = exynos4_clk_ip_image_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "i2c", + .id = 0, + .parent = &clk_aclk_100.clk, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 6), + }, { + .name = "i2c", + .id = 1, + .parent = &clk_aclk_100.clk, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 7), + }, { + .name = "i2c", + .id = 2, + .parent = &clk_aclk_100.clk, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 8), + }, { + .name = "i2c", + .id = 3, + .parent = &clk_aclk_100.clk, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 9), + }, { + .name = "i2c", + .id = 4, + .parent = &clk_aclk_100.clk, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 10), + }, { + .name = "i2c", + .id = 5, + .parent = &clk_aclk_100.clk, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 11), + }, { + .name = "i2c", + .id = 6, + .parent = &clk_aclk_100.clk, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 12), + }, { + .name = "i2c", + .id = 7, + .parent = &clk_aclk_100.clk, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 13), + }, +}; + +static struct clk init_clocks[] = { + { + .name = "uart", + .id = 0, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "uart", + .id = 1, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "uart", + .id = 2, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 2), + }, { + .name = "uart", + .id = 3, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 3), + }, { + .name = "uart", + .id = 4, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 4), + }, { + .name = "uart", + .id = 5, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 5), + } +}; + +static struct clk *clkset_group_list[] = { + [0] = &clk_ext_xtal_mux, + [1] = &clk_xusbxti, + [2] = &clk_sclk_hdmi27m, + [3] = &clk_sclk_usbphy0, + [4] = &clk_sclk_usbphy1, + [5] = &clk_sclk_hdmiphy, + [6] = &clk_mout_mpll.clk, + [7] = &clk_mout_epll.clk, + [8] = &clk_sclk_vpll.clk, +}; + +static struct clksrc_sources clkset_group = { + .sources = clkset_group_list, + .nr_sources = ARRAY_SIZE(clkset_group_list), +}; + +static struct clk *clkset_mout_g2d0_list[] = { + [0] = &clk_mout_mpll.clk, + [1] = &clk_sclk_apll.clk, +}; + +static struct clksrc_sources clkset_mout_g2d0 = { + .sources = clkset_mout_g2d0_list, + .nr_sources = ARRAY_SIZE(clkset_mout_g2d0_list), +}; + +static struct clksrc_clk clk_mout_g2d0 = { + .clk = { + .name = "mout_g2d0", + .id = -1, + }, + .sources = &clkset_mout_g2d0, + .reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 0, .size = 1 }, +}; + +static struct clk *clkset_mout_g2d1_list[] = { + [0] = &clk_mout_epll.clk, + [1] = &clk_sclk_vpll.clk, +}; + +static struct clksrc_sources clkset_mout_g2d1 = { + .sources = clkset_mout_g2d1_list, + .nr_sources = ARRAY_SIZE(clkset_mout_g2d1_list), +}; + +static struct clksrc_clk clk_mout_g2d1 = { + .clk = { + .name = "mout_g2d1", + .id = -1, + }, + .sources = &clkset_mout_g2d1, + .reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 4, .size = 1 }, +}; + +static struct clk *clkset_mout_g2d_list[] = { + [0] = &clk_mout_g2d0.clk, + [1] = &clk_mout_g2d1.clk, +}; + +static struct clksrc_sources clkset_mout_g2d = { + .sources = clkset_mout_g2d_list, + .nr_sources = ARRAY_SIZE(clkset_mout_g2d_list), +}; + +static struct clksrc_clk clk_dout_mmc0 = { + .clk = { + .name = "dout_mmc0", + .id = -1, + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 0, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk clk_dout_mmc1 = { + .clk = { + .name = "dout_mmc1", + .id = -1, + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 4, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 16, .size = 4 }, +}; + +static struct clksrc_clk clk_dout_mmc2 = { + .clk = { + .name = "dout_mmc2", + .id = -1, + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 8, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk clk_dout_mmc3 = { + .clk = { + .name = "dout_mmc3", + .id = -1, + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 12, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 16, .size = 4 }, +}; + +static struct clksrc_clk clk_dout_mmc4 = { + .clk = { + .name = "dout_mmc4", + .id = -1, + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 16, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_FSYS3, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk clksrcs[] = { + { + .clk = { + .name = "uclk1", + .id = 0, + .enable = exynos4_clksrc_mask_peril0_ctrl, + .ctrlbit = (1 << 0), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 0, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "uclk1", + .id = 1, + .enable = exynos4_clksrc_mask_peril0_ctrl, + .ctrlbit = (1 << 4), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 4, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 4, .size = 4 }, + }, { + .clk = { + .name = "uclk1", + .id = 2, + .enable = exynos4_clksrc_mask_peril0_ctrl, + .ctrlbit = (1 << 8), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 8, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 8, .size = 4 }, + }, { + .clk = { + .name = "uclk1", + .id = 3, + .enable = exynos4_clksrc_mask_peril0_ctrl, + .ctrlbit = (1 << 12), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 12, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 12, .size = 4 }, + }, { + .clk = { + .name = "sclk_pwm", + .id = -1, + .enable = exynos4_clksrc_mask_peril0_ctrl, + .ctrlbit = (1 << 24), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 24, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_PERIL3, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_csis", + .id = 0, + .enable = exynos4_clksrc_mask_cam_ctrl, + .ctrlbit = (1 << 24), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 24, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 24, .size = 4 }, + }, { + .clk = { + .name = "sclk_csis", + .id = 1, + .enable = exynos4_clksrc_mask_cam_ctrl, + .ctrlbit = (1 << 28), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 28, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 28, .size = 4 }, + }, { + .clk = { + .name = "sclk_cam", + .id = 0, + .enable = exynos4_clksrc_mask_cam_ctrl, + .ctrlbit = (1 << 16), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 16, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 16, .size = 4 }, + }, { + .clk = { + .name = "sclk_cam", + .id = 1, + .enable = exynos4_clksrc_mask_cam_ctrl, + .ctrlbit = (1 << 20), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 20, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 20, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimc", + .id = 0, + .enable = exynos4_clksrc_mask_cam_ctrl, + .ctrlbit = (1 << 0), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 0, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimc", + .id = 1, + .enable = exynos4_clksrc_mask_cam_ctrl, + .ctrlbit = (1 << 4), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 4, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 4, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimc", + .id = 2, + .enable = exynos4_clksrc_mask_cam_ctrl, + .ctrlbit = (1 << 8), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 8, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 8, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimc", + .id = 3, + .enable = exynos4_clksrc_mask_cam_ctrl, + .ctrlbit = (1 << 12), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 12, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 12, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimd", + .id = 0, + .enable = exynos4_clksrc_mask_lcd0_ctrl, + .ctrlbit = (1 << 0), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_LCD0, .shift = 0, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_LCD0, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimd", + .id = 1, + .enable = exynos4_clksrc_mask_lcd1_ctrl, + .ctrlbit = (1 << 0), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_LCD1, .shift = 0, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_LCD1, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_sata", + .id = -1, + .enable = exynos4_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 24), + }, + .sources = &clkset_mout_corebus, + .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 24, .size = 1 }, + .reg_div = { .reg = S5P_CLKDIV_FSYS0, .shift = 20, .size = 4 }, + }, { + .clk = { + .name = "sclk_spi", + .id = 0, + .enable = exynos4_clksrc_mask_peril1_ctrl, + .ctrlbit = (1 << 16), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 16, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_spi", + .id = 1, + .enable = exynos4_clksrc_mask_peril1_ctrl, + .ctrlbit = (1 << 20), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 20, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 16, .size = 4 }, + }, { + .clk = { + .name = "sclk_spi", + .id = 2, + .enable = exynos4_clksrc_mask_peril1_ctrl, + .ctrlbit = (1 << 24), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 24, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_PERIL2, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimg2d", + .id = -1, + }, + .sources = &clkset_mout_g2d, + .reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 8, .size = 1 }, + .reg_div = { .reg = S5P_CLKDIV_IMAGE, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_mmc", + .id = 0, + .parent = &clk_dout_mmc0.clk, + .enable = exynos4_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 0), + }, + .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 8, .size = 8 }, + }, { + .clk = { + .name = "sclk_mmc", + .id = 1, + .parent = &clk_dout_mmc1.clk, + .enable = exynos4_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 4), + }, + .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 24, .size = 8 }, + }, { + .clk = { + .name = "sclk_mmc", + .id = 2, + .parent = &clk_dout_mmc2.clk, + .enable = exynos4_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 8), + }, + .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 8, .size = 8 }, + }, { + .clk = { + .name = "sclk_mmc", + .id = 3, + .parent = &clk_dout_mmc3.clk, + .enable = exynos4_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 12), + }, + .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 24, .size = 8 }, + }, { + .clk = { + .name = "sclk_mmc", + .id = 4, + .parent = &clk_dout_mmc4.clk, + .enable = exynos4_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 16), + }, + .reg_div = { .reg = S5P_CLKDIV_FSYS3, .shift = 8, .size = 8 }, + } +}; + +/* Clock initialization code */ +static struct clksrc_clk *sysclks[] = { + &clk_mout_apll, + &clk_sclk_apll, + &clk_mout_epll, + &clk_mout_mpll, + &clk_moutcore, + &clk_coreclk, + &clk_armclk, + &clk_aclk_corem0, + &clk_aclk_cores, + &clk_aclk_corem1, + &clk_periphclk, + &clk_mout_corebus, + &clk_sclk_dmc, + &clk_aclk_cored, + &clk_aclk_corep, + &clk_aclk_acp, + &clk_pclk_acp, + &clk_vpllsrc, + &clk_sclk_vpll, + &clk_aclk_200, + &clk_aclk_100, + &clk_aclk_160, + &clk_aclk_133, + &clk_dout_mmc0, + &clk_dout_mmc1, + &clk_dout_mmc2, + &clk_dout_mmc3, + &clk_dout_mmc4, +}; + +static int xtal_rate; + +static unsigned long exynos4_fout_apll_get_rate(struct clk *clk) +{ + return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0), pll_4508); +} + +static struct clk_ops exynos4_fout_apll_ops = { + .get_rate = exynos4_fout_apll_get_rate, +}; + +void __init_or_cpufreq exynos4_setup_clocks(void) +{ + struct clk *xtal_clk; + unsigned long apll; + unsigned long mpll; + unsigned long epll; + unsigned long vpll; + unsigned long vpllsrc; + unsigned long xtal; + unsigned long armclk; + unsigned long sclk_dmc; + unsigned long aclk_200; + unsigned long aclk_100; + unsigned long aclk_160; + unsigned long aclk_133; + unsigned int ptr; + + printk(KERN_DEBUG "%s: registering clocks\n", __func__); + + xtal_clk = clk_get(NULL, "xtal"); + BUG_ON(IS_ERR(xtal_clk)); + + xtal = clk_get_rate(xtal_clk); + + xtal_rate = xtal; + + clk_put(xtal_clk); + + printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); + + apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0), pll_4508); + mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0), pll_4508); + epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0), + __raw_readl(S5P_EPLL_CON1), pll_4600); + + vpllsrc = clk_get_rate(&clk_vpllsrc.clk); + vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0), + __raw_readl(S5P_VPLL_CON1), pll_4650); + + clk_fout_apll.ops = &exynos4_fout_apll_ops; + clk_fout_mpll.rate = mpll; + clk_fout_epll.rate = epll; + clk_fout_vpll.rate = vpll; + + printk(KERN_INFO "EXYNOS4: PLL settings, A=%ld, M=%ld, E=%ld V=%ld", + apll, mpll, epll, vpll); + + armclk = clk_get_rate(&clk_armclk.clk); + sclk_dmc = clk_get_rate(&clk_sclk_dmc.clk); + + aclk_200 = clk_get_rate(&clk_aclk_200.clk); + aclk_100 = clk_get_rate(&clk_aclk_100.clk); + aclk_160 = clk_get_rate(&clk_aclk_160.clk); + aclk_133 = clk_get_rate(&clk_aclk_133.clk); + + printk(KERN_INFO "EXYNOS4: ARMCLK=%ld, DMC=%ld, ACLK200=%ld\n" + "ACLK100=%ld, ACLK160=%ld, ACLK133=%ld\n", + armclk, sclk_dmc, aclk_200, + aclk_100, aclk_160, aclk_133); + + clk_f.rate = armclk; + clk_h.rate = sclk_dmc; + clk_p.rate = aclk_100; + + for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) + s3c_set_clksrc(&clksrcs[ptr], true); +} + +static struct clk *clks[] __initdata = { + /* Nothing here yet */ +}; + +void __init exynos4_register_clocks(void) +{ + int ptr; + + s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); + + for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) + s3c_register_clksrc(sysclks[ptr], 1); + + s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); + s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); + + s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + + s3c_pwmclk_init(); +} diff --git a/arch/arm/mach-exynos4/include/mach/regs-clock.h b/arch/arm/mach-exynos4/include/mach/regs-clock.h new file mode 100644 index 00000000000..ba8f91c04e1 --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/regs-clock.h @@ -0,0 +1,167 @@ +/* linux/arch/arm/mach-exynos4/include/mach/regs-clock.h + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4 - Clock register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_CLOCK_H +#define __ASM_ARCH_REGS_CLOCK_H __FILE__ + +#include + +#define S5P_CLKREG(x) (S5P_VA_CMU + (x)) + +#define S5P_INFORM0 S5P_CLKREG(0x800) + +#define S5P_CLKDIV_LEFTBUS S5P_CLKREG(0x04500) +#define S5P_CLKDIV_STAT_LEFTBUS S5P_CLKREG(0x04600) + +#define S5P_CLKDIV_RIGHTBUS S5P_CLKREG(0x08500) +#define S5P_CLKDIV_STAT_RIGHTBUS S5P_CLKREG(0x08600) + +#define S5P_EPLL_CON0 S5P_CLKREG(0x0C110) +#define S5P_EPLL_CON1 S5P_CLKREG(0x0C114) +#define S5P_VPLL_CON0 S5P_CLKREG(0x0C120) +#define S5P_VPLL_CON1 S5P_CLKREG(0x0C124) + +#define S5P_CLKSRC_TOP0 S5P_CLKREG(0x0C210) +#define S5P_CLKSRC_TOP1 S5P_CLKREG(0x0C214) +#define S5P_CLKSRC_CAM S5P_CLKREG(0x0C220) +#define S5P_CLKSRC_IMAGE S5P_CLKREG(0x0C230) +#define S5P_CLKSRC_LCD0 S5P_CLKREG(0x0C234) +#define S5P_CLKSRC_LCD1 S5P_CLKREG(0x0C238) +#define S5P_CLKSRC_FSYS S5P_CLKREG(0x0C240) +#define S5P_CLKSRC_PERIL0 S5P_CLKREG(0x0C250) +#define S5P_CLKSRC_PERIL1 S5P_CLKREG(0x0C254) + +#define S5P_CLKDIV_TOP S5P_CLKREG(0x0C510) +#define S5P_CLKDIV_CAM S5P_CLKREG(0x0C520) +#define S5P_CLKDIV_IMAGE S5P_CLKREG(0x0C530) +#define S5P_CLKDIV_LCD0 S5P_CLKREG(0x0C534) +#define S5P_CLKDIV_LCD1 S5P_CLKREG(0x0C538) +#define S5P_CLKDIV_FSYS0 S5P_CLKREG(0x0C540) +#define S5P_CLKDIV_FSYS1 S5P_CLKREG(0x0C544) +#define S5P_CLKDIV_FSYS2 S5P_CLKREG(0x0C548) +#define S5P_CLKDIV_FSYS3 S5P_CLKREG(0x0C54C) +#define S5P_CLKDIV_PERIL0 S5P_CLKREG(0x0C550) +#define S5P_CLKDIV_PERIL1 S5P_CLKREG(0x0C554) +#define S5P_CLKDIV_PERIL2 S5P_CLKREG(0x0C558) +#define S5P_CLKDIV_PERIL3 S5P_CLKREG(0x0C55C) +#define S5P_CLKDIV_PERIL4 S5P_CLKREG(0x0C560) +#define S5P_CLKDIV_PERIL5 S5P_CLKREG(0x0C564) + +#define S5P_CLKSRC_MASK_TOP S5P_CLKREG(0x0C310) +#define S5P_CLKSRC_MASK_CAM S5P_CLKREG(0x0C320) +#define S5P_CLKSRC_MASK_LCD0 S5P_CLKREG(0x0C334) +#define S5P_CLKSRC_MASK_LCD1 S5P_CLKREG(0x0C338) +#define S5P_CLKSRC_MASK_FSYS S5P_CLKREG(0x0C340) +#define S5P_CLKSRC_MASK_PERIL0 S5P_CLKREG(0x0C350) +#define S5P_CLKSRC_MASK_PERIL1 S5P_CLKREG(0x0C354) + +#define S5P_CLKDIV_STAT_TOP S5P_CLKREG(0x0C610) + +#define S5P_CLKGATE_IP_CAM S5P_CLKREG(0x0C920) +#define S5P_CLKGATE_IP_IMAGE S5P_CLKREG(0x0C930) +#define S5P_CLKGATE_IP_LCD0 S5P_CLKREG(0x0C934) +#define S5P_CLKGATE_IP_LCD1 S5P_CLKREG(0x0C938) +#define S5P_CLKGATE_IP_FSYS S5P_CLKREG(0x0C940) +#define S5P_CLKGATE_IP_PERIL S5P_CLKREG(0x0C950) +#define S5P_CLKGATE_IP_PERIR S5P_CLKREG(0x0C960) + +#define S5P_CLKSRC_DMC S5P_CLKREG(0x10200) +#define S5P_CLKDIV_DMC0 S5P_CLKREG(0x10500) +#define S5P_CLKDIV_STAT_DMC0 S5P_CLKREG(0x10600) + +#define S5P_APLL_LOCK S5P_CLKREG(0x14000) +#define S5P_MPLL_LOCK S5P_CLKREG(0x14004) +#define S5P_APLL_CON0 S5P_CLKREG(0x14100) +#define S5P_APLL_CON1 S5P_CLKREG(0x14104) +#define S5P_MPLL_CON0 S5P_CLKREG(0x14108) +#define S5P_MPLL_CON1 S5P_CLKREG(0x1410C) + +#define S5P_CLKSRC_CPU S5P_CLKREG(0x14200) +#define S5P_CLKMUX_STATCPU S5P_CLKREG(0x14400) + +#define S5P_CLKDIV_CPU S5P_CLKREG(0x14500) +#define S5P_CLKDIV_CPU1 S5P_CLKREG(0x14504) +#define S5P_CLKDIV_STATCPU S5P_CLKREG(0x14600) +#define S5P_CLKDIV_STATCPU1 S5P_CLKREG(0x14604) + +#define S5P_CLKGATE_SCLKCPU S5P_CLKREG(0x14800) + +/* APLL_LOCK */ +#define S5P_APLL_LOCKTIME (0x1C20) /* 300us */ + +/* APLL_CON0 */ +#define S5P_APLLCON0_ENABLE_SHIFT (31) +#define S5P_APLLCON0_LOCKED_SHIFT (29) +#define S5P_APLL_VAL_1000 ((250 << 16) | (6 << 8) | 1) +#define S5P_APLL_VAL_800 ((200 << 16) | (6 << 8) | 1) + +/* CLK_SRC_CPU */ +#define S5P_CLKSRC_CPU_MUXCORE_SHIFT (16) +#define S5P_CLKMUX_STATCPU_MUXCORE_MASK (0x7 << S5P_CLKSRC_CPU_MUXCORE_SHIFT) + +/* CLKDIV_CPU0 */ +#define S5P_CLKDIV_CPU0_CORE_SHIFT (0) +#define S5P_CLKDIV_CPU0_CORE_MASK (0x7 << S5P_CLKDIV_CPU0_CORE_SHIFT) +#define S5P_CLKDIV_CPU0_COREM0_SHIFT (4) +#define S5P_CLKDIV_CPU0_COREM0_MASK (0x7 << S5P_CLKDIV_CPU0_COREM0_SHIFT) +#define S5P_CLKDIV_CPU0_COREM1_SHIFT (8) +#define S5P_CLKDIV_CPU0_COREM1_MASK (0x7 << S5P_CLKDIV_CPU0_COREM1_SHIFT) +#define S5P_CLKDIV_CPU0_PERIPH_SHIFT (12) +#define S5P_CLKDIV_CPU0_PERIPH_MASK (0x7 << S5P_CLKDIV_CPU0_PERIPH_SHIFT) +#define S5P_CLKDIV_CPU0_ATB_SHIFT (16) +#define S5P_CLKDIV_CPU0_ATB_MASK (0x7 << S5P_CLKDIV_CPU0_ATB_SHIFT) +#define S5P_CLKDIV_CPU0_PCLKDBG_SHIFT (20) +#define S5P_CLKDIV_CPU0_PCLKDBG_MASK (0x7 << S5P_CLKDIV_CPU0_PCLKDBG_SHIFT) +#define S5P_CLKDIV_CPU0_APLL_SHIFT (24) +#define S5P_CLKDIV_CPU0_APLL_MASK (0x7 << S5P_CLKDIV_CPU0_APLL_SHIFT) + +/* CLKDIV_DMC0 */ +#define S5P_CLKDIV_DMC0_ACP_SHIFT (0) +#define S5P_CLKDIV_DMC0_ACP_MASK (0x7 << S5P_CLKDIV_DMC0_ACP_SHIFT) +#define S5P_CLKDIV_DMC0_ACPPCLK_SHIFT (4) +#define S5P_CLKDIV_DMC0_ACPPCLK_MASK (0x7 << S5P_CLKDIV_DMC0_ACPPCLK_SHIFT) +#define S5P_CLKDIV_DMC0_DPHY_SHIFT (8) +#define S5P_CLKDIV_DMC0_DPHY_MASK (0x7 << S5P_CLKDIV_DMC0_DPHY_SHIFT) +#define S5P_CLKDIV_DMC0_DMC_SHIFT (12) +#define S5P_CLKDIV_DMC0_DMC_MASK (0x7 << S5P_CLKDIV_DMC0_DMC_SHIFT) +#define S5P_CLKDIV_DMC0_DMCD_SHIFT (16) +#define S5P_CLKDIV_DMC0_DMCD_MASK (0x7 << S5P_CLKDIV_DMC0_DMCD_SHIFT) +#define S5P_CLKDIV_DMC0_DMCP_SHIFT (20) +#define S5P_CLKDIV_DMC0_DMCP_MASK (0x7 << S5P_CLKDIV_DMC0_DMCP_SHIFT) +#define S5P_CLKDIV_DMC0_COPY2_SHIFT (24) +#define S5P_CLKDIV_DMC0_COPY2_MASK (0x7 << S5P_CLKDIV_DMC0_COPY2_SHIFT) +#define S5P_CLKDIV_DMC0_CORETI_SHIFT (28) +#define S5P_CLKDIV_DMC0_CORETI_MASK (0x7 << S5P_CLKDIV_DMC0_CORETI_SHIFT) + +/* CLKDIV_TOP */ +#define S5P_CLKDIV_TOP_ACLK200_SHIFT (0) +#define S5P_CLKDIV_TOP_ACLK200_MASK (0x7 << S5P_CLKDIV_TOP_ACLK200_SHIFT) +#define S5P_CLKDIV_TOP_ACLK100_SHIFT (4) +#define S5P_CLKDIV_TOP_ACLK100_MASK (0xf << S5P_CLKDIV_TOP_ACLK100_SHIFT) +#define S5P_CLKDIV_TOP_ACLK160_SHIFT (8) +#define S5P_CLKDIV_TOP_ACLK160_MASK (0x7 << S5P_CLKDIV_TOP_ACLK160_SHIFT) +#define S5P_CLKDIV_TOP_ACLK133_SHIFT (12) +#define S5P_CLKDIV_TOP_ACLK133_MASK (0x7 << S5P_CLKDIV_TOP_ACLK133_SHIFT) +#define S5P_CLKDIV_TOP_ONENAND_SHIFT (16) +#define S5P_CLKDIV_TOP_ONENAND_MASK (0x7 << S5P_CLKDIV_TOP_ONENAND_SHIFT) + +/* CLKDIV_LEFTBUS / CLKDIV_RIGHTBUS*/ +#define S5P_CLKDIV_BUS_GDLR_SHIFT (0) +#define S5P_CLKDIV_BUS_GDLR_MASK (0x7 << S5P_CLKDIV_BUS_GDLR_SHIFT) +#define S5P_CLKDIV_BUS_GPLR_SHIFT (4) +#define S5P_CLKDIV_BUS_GPLR_MASK (0x7 << S5P_CLKDIV_BUS_GPLR_SHIFT) + +/* Compatibility defines */ + +#define S5P_EPLL_CON S5P_EPLL_CON0 + +#endif /* __ASM_ARCH_REGS_CLOCK_H */ diff --git a/arch/arm/mach-s5pv310/clock.c b/arch/arm/mach-s5pv310/clock.c deleted file mode 100644 index fc7c2f8d165..00000000000 --- a/arch/arm/mach-s5pv310/clock.c +++ /dev/null @@ -1,1122 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/clock.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5PV310 - Clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -#include -#include - -static struct clk clk_sclk_hdmi27m = { - .name = "sclk_hdmi27m", - .id = -1, - .rate = 27000000, -}; - -static struct clk clk_sclk_hdmiphy = { - .name = "sclk_hdmiphy", - .id = -1, -}; - -static struct clk clk_sclk_usbphy0 = { - .name = "sclk_usbphy0", - .id = -1, - .rate = 27000000, -}; - -static struct clk clk_sclk_usbphy1 = { - .name = "sclk_usbphy1", - .id = -1, -}; - -static int s5pv310_clksrc_mask_top_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKSRC_MASK_TOP, clk, enable); -} - -static int s5pv310_clksrc_mask_cam_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKSRC_MASK_CAM, clk, enable); -} - -static int s5pv310_clksrc_mask_lcd0_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKSRC_MASK_LCD0, clk, enable); -} - -static int s5pv310_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable); -} - -static int s5pv310_clksrc_mask_fsys_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKSRC_MASK_FSYS, clk, enable); -} - -static int s5pv310_clksrc_mask_peril0_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKSRC_MASK_PERIL0, clk, enable); -} - -static int s5pv310_clksrc_mask_peril1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKSRC_MASK_PERIL1, clk, enable); -} - -static int s5pv310_clk_ip_cam_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP_CAM, clk, enable); -} - -static int s5pv310_clk_ip_image_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP_IMAGE, clk, enable); -} - -static int s5pv310_clk_ip_lcd0_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP_LCD0, clk, enable); -} - -static int s5pv310_clk_ip_lcd1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP_LCD1, clk, enable); -} - -static int s5pv310_clk_ip_fsys_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP_FSYS, clk, enable); -} - -static int s5pv310_clk_ip_peril_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP_PERIL, clk, enable); -} - -static int s5pv310_clk_ip_perir_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP_PERIR, clk, enable); -} - -/* Core list of CMU_CPU side */ - -static struct clksrc_clk clk_mout_apll = { - .clk = { - .name = "mout_apll", - .id = -1, - }, - .sources = &clk_src_apll, - .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 0, .size = 1 }, -}; - -static struct clksrc_clk clk_sclk_apll = { - .clk = { - .name = "sclk_apll", - .id = -1, - .parent = &clk_mout_apll.clk, - }, - .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 24, .size = 3 }, -}; - -static struct clksrc_clk clk_mout_epll = { - .clk = { - .name = "mout_epll", - .id = -1, - }, - .sources = &clk_src_epll, - .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 4, .size = 1 }, -}; - -static struct clksrc_clk clk_mout_mpll = { - .clk = { - .name = "mout_mpll", - .id = -1, - }, - .sources = &clk_src_mpll, - .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 8, .size = 1 }, -}; - -static struct clk *clkset_moutcore_list[] = { - [0] = &clk_mout_apll.clk, - [1] = &clk_mout_mpll.clk, -}; - -static struct clksrc_sources clkset_moutcore = { - .sources = clkset_moutcore_list, - .nr_sources = ARRAY_SIZE(clkset_moutcore_list), -}; - -static struct clksrc_clk clk_moutcore = { - .clk = { - .name = "moutcore", - .id = -1, - }, - .sources = &clkset_moutcore, - .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 16, .size = 1 }, -}; - -static struct clksrc_clk clk_coreclk = { - .clk = { - .name = "core_clk", - .id = -1, - .parent = &clk_moutcore.clk, - }, - .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 0, .size = 3 }, -}; - -static struct clksrc_clk clk_armclk = { - .clk = { - .name = "armclk", - .id = -1, - .parent = &clk_coreclk.clk, - }, -}; - -static struct clksrc_clk clk_aclk_corem0 = { - .clk = { - .name = "aclk_corem0", - .id = -1, - .parent = &clk_coreclk.clk, - }, - .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 4, .size = 3 }, -}; - -static struct clksrc_clk clk_aclk_cores = { - .clk = { - .name = "aclk_cores", - .id = -1, - .parent = &clk_coreclk.clk, - }, - .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 4, .size = 3 }, -}; - -static struct clksrc_clk clk_aclk_corem1 = { - .clk = { - .name = "aclk_corem1", - .id = -1, - .parent = &clk_coreclk.clk, - }, - .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 8, .size = 3 }, -}; - -static struct clksrc_clk clk_periphclk = { - .clk = { - .name = "periphclk", - .id = -1, - .parent = &clk_coreclk.clk, - }, - .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 12, .size = 3 }, -}; - -/* Core list of CMU_CORE side */ - -static struct clk *clkset_corebus_list[] = { - [0] = &clk_mout_mpll.clk, - [1] = &clk_sclk_apll.clk, -}; - -static struct clksrc_sources clkset_mout_corebus = { - .sources = clkset_corebus_list, - .nr_sources = ARRAY_SIZE(clkset_corebus_list), -}; - -static struct clksrc_clk clk_mout_corebus = { - .clk = { - .name = "mout_corebus", - .id = -1, - }, - .sources = &clkset_mout_corebus, - .reg_src = { .reg = S5P_CLKSRC_DMC, .shift = 4, .size = 1 }, -}; - -static struct clksrc_clk clk_sclk_dmc = { - .clk = { - .name = "sclk_dmc", - .id = -1, - .parent = &clk_mout_corebus.clk, - }, - .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 12, .size = 3 }, -}; - -static struct clksrc_clk clk_aclk_cored = { - .clk = { - .name = "aclk_cored", - .id = -1, - .parent = &clk_sclk_dmc.clk, - }, - .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 16, .size = 3 }, -}; - -static struct clksrc_clk clk_aclk_corep = { - .clk = { - .name = "aclk_corep", - .id = -1, - .parent = &clk_aclk_cored.clk, - }, - .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 20, .size = 3 }, -}; - -static struct clksrc_clk clk_aclk_acp = { - .clk = { - .name = "aclk_acp", - .id = -1, - .parent = &clk_mout_corebus.clk, - }, - .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 0, .size = 3 }, -}; - -static struct clksrc_clk clk_pclk_acp = { - .clk = { - .name = "pclk_acp", - .id = -1, - .parent = &clk_aclk_acp.clk, - }, - .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 4, .size = 3 }, -}; - -/* Core list of CMU_TOP side */ - -static struct clk *clkset_aclk_top_list[] = { - [0] = &clk_mout_mpll.clk, - [1] = &clk_sclk_apll.clk, -}; - -static struct clksrc_sources clkset_aclk = { - .sources = clkset_aclk_top_list, - .nr_sources = ARRAY_SIZE(clkset_aclk_top_list), -}; - -static struct clksrc_clk clk_aclk_200 = { - .clk = { - .name = "aclk_200", - .id = -1, - }, - .sources = &clkset_aclk, - .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 12, .size = 1 }, - .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 0, .size = 3 }, -}; - -static struct clksrc_clk clk_aclk_100 = { - .clk = { - .name = "aclk_100", - .id = -1, - }, - .sources = &clkset_aclk, - .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 16, .size = 1 }, - .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 4, .size = 4 }, -}; - -static struct clksrc_clk clk_aclk_160 = { - .clk = { - .name = "aclk_160", - .id = -1, - }, - .sources = &clkset_aclk, - .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 20, .size = 1 }, - .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 8, .size = 3 }, -}; - -static struct clksrc_clk clk_aclk_133 = { - .clk = { - .name = "aclk_133", - .id = -1, - }, - .sources = &clkset_aclk, - .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 24, .size = 1 }, - .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 12, .size = 3 }, -}; - -static struct clk *clkset_vpllsrc_list[] = { - [0] = &clk_fin_vpll, - [1] = &clk_sclk_hdmi27m, -}; - -static struct clksrc_sources clkset_vpllsrc = { - .sources = clkset_vpllsrc_list, - .nr_sources = ARRAY_SIZE(clkset_vpllsrc_list), -}; - -static struct clksrc_clk clk_vpllsrc = { - .clk = { - .name = "vpll_src", - .id = -1, - .enable = s5pv310_clksrc_mask_top_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &clkset_vpllsrc, - .reg_src = { .reg = S5P_CLKSRC_TOP1, .shift = 0, .size = 1 }, -}; - -static struct clk *clkset_sclk_vpll_list[] = { - [0] = &clk_vpllsrc.clk, - [1] = &clk_fout_vpll, -}; - -static struct clksrc_sources clkset_sclk_vpll = { - .sources = clkset_sclk_vpll_list, - .nr_sources = ARRAY_SIZE(clkset_sclk_vpll_list), -}; - -static struct clksrc_clk clk_sclk_vpll = { - .clk = { - .name = "sclk_vpll", - .id = -1, - }, - .sources = &clkset_sclk_vpll, - .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 8, .size = 1 }, -}; - -static struct clk init_clocks_off[] = { - { - .name = "timers", - .id = -1, - .parent = &clk_aclk_100.clk, - .enable = s5pv310_clk_ip_peril_ctrl, - .ctrlbit = (1<<24), - }, { - .name = "csis", - .id = 0, - .enable = s5pv310_clk_ip_cam_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "csis", - .id = 1, - .enable = s5pv310_clk_ip_cam_ctrl, - .ctrlbit = (1 << 5), - }, { - .name = "fimc", - .id = 0, - .enable = s5pv310_clk_ip_cam_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "fimc", - .id = 1, - .enable = s5pv310_clk_ip_cam_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "fimc", - .id = 2, - .enable = s5pv310_clk_ip_cam_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "fimc", - .id = 3, - .enable = s5pv310_clk_ip_cam_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "fimd", - .id = 0, - .enable = s5pv310_clk_ip_lcd0_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "fimd", - .id = 1, - .enable = s5pv310_clk_ip_lcd1_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "hsmmc", - .id = 0, - .parent = &clk_aclk_133.clk, - .enable = s5pv310_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 5), - }, { - .name = "hsmmc", - .id = 1, - .parent = &clk_aclk_133.clk, - .enable = s5pv310_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 6), - }, { - .name = "hsmmc", - .id = 2, - .parent = &clk_aclk_133.clk, - .enable = s5pv310_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 7), - }, { - .name = "hsmmc", - .id = 3, - .parent = &clk_aclk_133.clk, - .enable = s5pv310_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 8), - }, { - .name = "hsmmc", - .id = 4, - .parent = &clk_aclk_133.clk, - .enable = s5pv310_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 9), - }, { - .name = "sata", - .id = -1, - .enable = s5pv310_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 10), - }, { - .name = "pdma", - .id = 0, - .enable = s5pv310_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "pdma", - .id = 1, - .enable = s5pv310_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "adc", - .id = -1, - .enable = s5pv310_clk_ip_peril_ctrl, - .ctrlbit = (1 << 15), - }, { - .name = "rtc", - .id = -1, - .enable = s5pv310_clk_ip_perir_ctrl, - .ctrlbit = (1 << 15), - }, { - .name = "watchdog", - .id = -1, - .enable = s5pv310_clk_ip_perir_ctrl, - .ctrlbit = (1 << 14), - }, { - .name = "usbhost", - .id = -1, - .enable = s5pv310_clk_ip_fsys_ctrl , - .ctrlbit = (1 << 12), - }, { - .name = "otg", - .id = -1, - .enable = s5pv310_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 13), - }, { - .name = "spi", - .id = 0, - .enable = s5pv310_clk_ip_peril_ctrl, - .ctrlbit = (1 << 16), - }, { - .name = "spi", - .id = 1, - .enable = s5pv310_clk_ip_peril_ctrl, - .ctrlbit = (1 << 17), - }, { - .name = "spi", - .id = 2, - .enable = s5pv310_clk_ip_peril_ctrl, - .ctrlbit = (1 << 18), - }, { - .name = "iis", - .id = 0, - .enable = s5pv310_clk_ip_peril_ctrl, - .ctrlbit = (1 << 19), - }, { - .name = "iis", - .id = 1, - .enable = s5pv310_clk_ip_peril_ctrl, - .ctrlbit = (1 << 20), - }, { - .name = "iis", - .id = 2, - .enable = s5pv310_clk_ip_peril_ctrl, - .ctrlbit = (1 << 21), - }, { - .name = "ac97", - .id = -1, - .enable = s5pv310_clk_ip_peril_ctrl, - .ctrlbit = (1 << 27), - }, { - .name = "fimg2d", - .id = -1, - .enable = s5pv310_clk_ip_image_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "i2c", - .id = 0, - .parent = &clk_aclk_100.clk, - .enable = s5pv310_clk_ip_peril_ctrl, - .ctrlbit = (1 << 6), - }, { - .name = "i2c", - .id = 1, - .parent = &clk_aclk_100.clk, - .enable = s5pv310_clk_ip_peril_ctrl, - .ctrlbit = (1 << 7), - }, { - .name = "i2c", - .id = 2, - .parent = &clk_aclk_100.clk, - .enable = s5pv310_clk_ip_peril_ctrl, - .ctrlbit = (1 << 8), - }, { - .name = "i2c", - .id = 3, - .parent = &clk_aclk_100.clk, - .enable = s5pv310_clk_ip_peril_ctrl, - .ctrlbit = (1 << 9), - }, { - .name = "i2c", - .id = 4, - .parent = &clk_aclk_100.clk, - .enable = s5pv310_clk_ip_peril_ctrl, - .ctrlbit = (1 << 10), - }, { - .name = "i2c", - .id = 5, - .parent = &clk_aclk_100.clk, - .enable = s5pv310_clk_ip_peril_ctrl, - .ctrlbit = (1 << 11), - }, { - .name = "i2c", - .id = 6, - .parent = &clk_aclk_100.clk, - .enable = s5pv310_clk_ip_peril_ctrl, - .ctrlbit = (1 << 12), - }, { - .name = "i2c", - .id = 7, - .parent = &clk_aclk_100.clk, - .enable = s5pv310_clk_ip_peril_ctrl, - .ctrlbit = (1 << 13), - }, -}; - -static struct clk init_clocks[] = { - { - .name = "uart", - .id = 0, - .enable = s5pv310_clk_ip_peril_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "uart", - .id = 1, - .enable = s5pv310_clk_ip_peril_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "uart", - .id = 2, - .enable = s5pv310_clk_ip_peril_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "uart", - .id = 3, - .enable = s5pv310_clk_ip_peril_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "uart", - .id = 4, - .enable = s5pv310_clk_ip_peril_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "uart", - .id = 5, - .enable = s5pv310_clk_ip_peril_ctrl, - .ctrlbit = (1 << 5), - } -}; - -static struct clk *clkset_group_list[] = { - [0] = &clk_ext_xtal_mux, - [1] = &clk_xusbxti, - [2] = &clk_sclk_hdmi27m, - [3] = &clk_sclk_usbphy0, - [4] = &clk_sclk_usbphy1, - [5] = &clk_sclk_hdmiphy, - [6] = &clk_mout_mpll.clk, - [7] = &clk_mout_epll.clk, - [8] = &clk_sclk_vpll.clk, -}; - -static struct clksrc_sources clkset_group = { - .sources = clkset_group_list, - .nr_sources = ARRAY_SIZE(clkset_group_list), -}; - -static struct clk *clkset_mout_g2d0_list[] = { - [0] = &clk_mout_mpll.clk, - [1] = &clk_sclk_apll.clk, -}; - -static struct clksrc_sources clkset_mout_g2d0 = { - .sources = clkset_mout_g2d0_list, - .nr_sources = ARRAY_SIZE(clkset_mout_g2d0_list), -}; - -static struct clksrc_clk clk_mout_g2d0 = { - .clk = { - .name = "mout_g2d0", - .id = -1, - }, - .sources = &clkset_mout_g2d0, - .reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 0, .size = 1 }, -}; - -static struct clk *clkset_mout_g2d1_list[] = { - [0] = &clk_mout_epll.clk, - [1] = &clk_sclk_vpll.clk, -}; - -static struct clksrc_sources clkset_mout_g2d1 = { - .sources = clkset_mout_g2d1_list, - .nr_sources = ARRAY_SIZE(clkset_mout_g2d1_list), -}; - -static struct clksrc_clk clk_mout_g2d1 = { - .clk = { - .name = "mout_g2d1", - .id = -1, - }, - .sources = &clkset_mout_g2d1, - .reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 4, .size = 1 }, -}; - -static struct clk *clkset_mout_g2d_list[] = { - [0] = &clk_mout_g2d0.clk, - [1] = &clk_mout_g2d1.clk, -}; - -static struct clksrc_sources clkset_mout_g2d = { - .sources = clkset_mout_g2d_list, - .nr_sources = ARRAY_SIZE(clkset_mout_g2d_list), -}; - -static struct clksrc_clk clk_dout_mmc0 = { - .clk = { - .name = "dout_mmc0", - .id = -1, - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 0, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk clk_dout_mmc1 = { - .clk = { - .name = "dout_mmc1", - .id = -1, - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 4, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 16, .size = 4 }, -}; - -static struct clksrc_clk clk_dout_mmc2 = { - .clk = { - .name = "dout_mmc2", - .id = -1, - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 8, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk clk_dout_mmc3 = { - .clk = { - .name = "dout_mmc3", - .id = -1, - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 12, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 16, .size = 4 }, -}; - -static struct clksrc_clk clk_dout_mmc4 = { - .clk = { - .name = "dout_mmc4", - .id = -1, - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 16, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_FSYS3, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk clksrcs[] = { - { - .clk = { - .name = "uclk1", - .id = 0, - .enable = s5pv310_clksrc_mask_peril0_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 0, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "uclk1", - .id = 1, - .enable = s5pv310_clksrc_mask_peril0_ctrl, - .ctrlbit = (1 << 4), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 4, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 4, .size = 4 }, - }, { - .clk = { - .name = "uclk1", - .id = 2, - .enable = s5pv310_clksrc_mask_peril0_ctrl, - .ctrlbit = (1 << 8), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 8, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 8, .size = 4 }, - }, { - .clk = { - .name = "uclk1", - .id = 3, - .enable = s5pv310_clksrc_mask_peril0_ctrl, - .ctrlbit = (1 << 12), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 12, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 12, .size = 4 }, - }, { - .clk = { - .name = "sclk_pwm", - .id = -1, - .enable = s5pv310_clksrc_mask_peril0_ctrl, - .ctrlbit = (1 << 24), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 24, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL3, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_csis", - .id = 0, - .enable = s5pv310_clksrc_mask_cam_ctrl, - .ctrlbit = (1 << 24), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 24, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 24, .size = 4 }, - }, { - .clk = { - .name = "sclk_csis", - .id = 1, - .enable = s5pv310_clksrc_mask_cam_ctrl, - .ctrlbit = (1 << 28), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 28, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 28, .size = 4 }, - }, { - .clk = { - .name = "sclk_cam", - .id = 0, - .enable = s5pv310_clksrc_mask_cam_ctrl, - .ctrlbit = (1 << 16), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 16, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 16, .size = 4 }, - }, { - .clk = { - .name = "sclk_cam", - .id = 1, - .enable = s5pv310_clksrc_mask_cam_ctrl, - .ctrlbit = (1 << 20), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 20, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 20, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimc", - .id = 0, - .enable = s5pv310_clksrc_mask_cam_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 0, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimc", - .id = 1, - .enable = s5pv310_clksrc_mask_cam_ctrl, - .ctrlbit = (1 << 4), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 4, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 4, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimc", - .id = 2, - .enable = s5pv310_clksrc_mask_cam_ctrl, - .ctrlbit = (1 << 8), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 8, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 8, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimc", - .id = 3, - .enable = s5pv310_clksrc_mask_cam_ctrl, - .ctrlbit = (1 << 12), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 12, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 12, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimd", - .id = 0, - .enable = s5pv310_clksrc_mask_lcd0_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_LCD0, .shift = 0, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_LCD0, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimd", - .id = 1, - .enable = s5pv310_clksrc_mask_lcd1_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_LCD1, .shift = 0, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_LCD1, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_sata", - .id = -1, - .enable = s5pv310_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 24), - }, - .sources = &clkset_mout_corebus, - .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 24, .size = 1 }, - .reg_div = { .reg = S5P_CLKDIV_FSYS0, .shift = 20, .size = 4 }, - }, { - .clk = { - .name = "sclk_spi", - .id = 0, - .enable = s5pv310_clksrc_mask_peril1_ctrl, - .ctrlbit = (1 << 16), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 16, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_spi", - .id = 1, - .enable = s5pv310_clksrc_mask_peril1_ctrl, - .ctrlbit = (1 << 20), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 20, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 16, .size = 4 }, - }, { - .clk = { - .name = "sclk_spi", - .id = 2, - .enable = s5pv310_clksrc_mask_peril1_ctrl, - .ctrlbit = (1 << 24), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 24, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL2, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimg2d", - .id = -1, - }, - .sources = &clkset_mout_g2d, - .reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 8, .size = 1 }, - .reg_div = { .reg = S5P_CLKDIV_IMAGE, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_mmc", - .id = 0, - .parent = &clk_dout_mmc0.clk, - .enable = s5pv310_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 0), - }, - .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 8, .size = 8 }, - }, { - .clk = { - .name = "sclk_mmc", - .id = 1, - .parent = &clk_dout_mmc1.clk, - .enable = s5pv310_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 4), - }, - .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 24, .size = 8 }, - }, { - .clk = { - .name = "sclk_mmc", - .id = 2, - .parent = &clk_dout_mmc2.clk, - .enable = s5pv310_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 8), - }, - .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 8, .size = 8 }, - }, { - .clk = { - .name = "sclk_mmc", - .id = 3, - .parent = &clk_dout_mmc3.clk, - .enable = s5pv310_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 12), - }, - .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 24, .size = 8 }, - }, { - .clk = { - .name = "sclk_mmc", - .id = 4, - .parent = &clk_dout_mmc4.clk, - .enable = s5pv310_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 16), - }, - .reg_div = { .reg = S5P_CLKDIV_FSYS3, .shift = 8, .size = 8 }, - } -}; - -/* Clock initialization code */ -static struct clksrc_clk *sysclks[] = { - &clk_mout_apll, - &clk_sclk_apll, - &clk_mout_epll, - &clk_mout_mpll, - &clk_moutcore, - &clk_coreclk, - &clk_armclk, - &clk_aclk_corem0, - &clk_aclk_cores, - &clk_aclk_corem1, - &clk_periphclk, - &clk_mout_corebus, - &clk_sclk_dmc, - &clk_aclk_cored, - &clk_aclk_corep, - &clk_aclk_acp, - &clk_pclk_acp, - &clk_vpllsrc, - &clk_sclk_vpll, - &clk_aclk_200, - &clk_aclk_100, - &clk_aclk_160, - &clk_aclk_133, - &clk_dout_mmc0, - &clk_dout_mmc1, - &clk_dout_mmc2, - &clk_dout_mmc3, - &clk_dout_mmc4, -}; - -static int xtal_rate; - -static unsigned long s5pv310_fout_apll_get_rate(struct clk *clk) -{ - return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0), pll_4508); -} - -static struct clk_ops s5pv310_fout_apll_ops = { - .get_rate = s5pv310_fout_apll_get_rate, -}; - -void __init_or_cpufreq s5pv310_setup_clocks(void) -{ - struct clk *xtal_clk; - unsigned long apll; - unsigned long mpll; - unsigned long epll; - unsigned long vpll; - unsigned long vpllsrc; - unsigned long xtal; - unsigned long armclk; - unsigned long sclk_dmc; - unsigned long aclk_200; - unsigned long aclk_100; - unsigned long aclk_160; - unsigned long aclk_133; - unsigned int ptr; - - printk(KERN_DEBUG "%s: registering clocks\n", __func__); - - xtal_clk = clk_get(NULL, "xtal"); - BUG_ON(IS_ERR(xtal_clk)); - - xtal = clk_get_rate(xtal_clk); - - xtal_rate = xtal; - - clk_put(xtal_clk); - - printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); - - apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0), pll_4508); - mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0), pll_4508); - epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0), - __raw_readl(S5P_EPLL_CON1), pll_4600); - - vpllsrc = clk_get_rate(&clk_vpllsrc.clk); - vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0), - __raw_readl(S5P_VPLL_CON1), pll_4650); - - clk_fout_apll.ops = &s5pv310_fout_apll_ops; - clk_fout_mpll.rate = mpll; - clk_fout_epll.rate = epll; - clk_fout_vpll.rate = vpll; - - printk(KERN_INFO "S5PV310: PLL settings, A=%ld, M=%ld, E=%ld V=%ld", - apll, mpll, epll, vpll); - - armclk = clk_get_rate(&clk_armclk.clk); - sclk_dmc = clk_get_rate(&clk_sclk_dmc.clk); - - aclk_200 = clk_get_rate(&clk_aclk_200.clk); - aclk_100 = clk_get_rate(&clk_aclk_100.clk); - aclk_160 = clk_get_rate(&clk_aclk_160.clk); - aclk_133 = clk_get_rate(&clk_aclk_133.clk); - - printk(KERN_INFO "S5PV310: ARMCLK=%ld, DMC=%ld, ACLK200=%ld\n" - "ACLK100=%ld, ACLK160=%ld, ACLK133=%ld\n", - armclk, sclk_dmc, aclk_200, - aclk_100, aclk_160, aclk_133); - - clk_f.rate = armclk; - clk_h.rate = sclk_dmc; - clk_p.rate = aclk_100; - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_set_clksrc(&clksrcs[ptr], true); -} - -static struct clk *clks[] __initdata = { - /* Nothing here yet */ -}; - -void __init s5pv310_register_clocks(void) -{ - int ptr; - - s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); - - for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) - s3c_register_clksrc(sysclks[ptr], 1); - - s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); - s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); - - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - - s3c_pwmclk_init(); -} diff --git a/arch/arm/mach-s5pv310/include/mach/regs-clock.h b/arch/arm/mach-s5pv310/include/mach/regs-clock.h deleted file mode 100644 index b5c4ada1cff..00000000000 --- a/arch/arm/mach-s5pv310/include/mach/regs-clock.h +++ /dev/null @@ -1,167 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/regs-clock.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5PV310 - Clock register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_CLOCK_H -#define __ASM_ARCH_REGS_CLOCK_H __FILE__ - -#include - -#define S5P_CLKREG(x) (S5P_VA_CMU + (x)) - -#define S5P_INFORM0 S5P_CLKREG(0x800) - -#define S5P_CLKDIV_LEFTBUS S5P_CLKREG(0x04500) -#define S5P_CLKDIV_STAT_LEFTBUS S5P_CLKREG(0x04600) - -#define S5P_CLKDIV_RIGHTBUS S5P_CLKREG(0x08500) -#define S5P_CLKDIV_STAT_RIGHTBUS S5P_CLKREG(0x08600) - -#define S5P_EPLL_CON0 S5P_CLKREG(0x0C110) -#define S5P_EPLL_CON1 S5P_CLKREG(0x0C114) -#define S5P_VPLL_CON0 S5P_CLKREG(0x0C120) -#define S5P_VPLL_CON1 S5P_CLKREG(0x0C124) - -#define S5P_CLKSRC_TOP0 S5P_CLKREG(0x0C210) -#define S5P_CLKSRC_TOP1 S5P_CLKREG(0x0C214) -#define S5P_CLKSRC_CAM S5P_CLKREG(0x0C220) -#define S5P_CLKSRC_IMAGE S5P_CLKREG(0x0C230) -#define S5P_CLKSRC_LCD0 S5P_CLKREG(0x0C234) -#define S5P_CLKSRC_LCD1 S5P_CLKREG(0x0C238) -#define S5P_CLKSRC_FSYS S5P_CLKREG(0x0C240) -#define S5P_CLKSRC_PERIL0 S5P_CLKREG(0x0C250) -#define S5P_CLKSRC_PERIL1 S5P_CLKREG(0x0C254) - -#define S5P_CLKDIV_TOP S5P_CLKREG(0x0C510) -#define S5P_CLKDIV_CAM S5P_CLKREG(0x0C520) -#define S5P_CLKDIV_IMAGE S5P_CLKREG(0x0C530) -#define S5P_CLKDIV_LCD0 S5P_CLKREG(0x0C534) -#define S5P_CLKDIV_LCD1 S5P_CLKREG(0x0C538) -#define S5P_CLKDIV_FSYS0 S5P_CLKREG(0x0C540) -#define S5P_CLKDIV_FSYS1 S5P_CLKREG(0x0C544) -#define S5P_CLKDIV_FSYS2 S5P_CLKREG(0x0C548) -#define S5P_CLKDIV_FSYS3 S5P_CLKREG(0x0C54C) -#define S5P_CLKDIV_PERIL0 S5P_CLKREG(0x0C550) -#define S5P_CLKDIV_PERIL1 S5P_CLKREG(0x0C554) -#define S5P_CLKDIV_PERIL2 S5P_CLKREG(0x0C558) -#define S5P_CLKDIV_PERIL3 S5P_CLKREG(0x0C55C) -#define S5P_CLKDIV_PERIL4 S5P_CLKREG(0x0C560) -#define S5P_CLKDIV_PERIL5 S5P_CLKREG(0x0C564) - -#define S5P_CLKSRC_MASK_TOP S5P_CLKREG(0x0C310) -#define S5P_CLKSRC_MASK_CAM S5P_CLKREG(0x0C320) -#define S5P_CLKSRC_MASK_LCD0 S5P_CLKREG(0x0C334) -#define S5P_CLKSRC_MASK_LCD1 S5P_CLKREG(0x0C338) -#define S5P_CLKSRC_MASK_FSYS S5P_CLKREG(0x0C340) -#define S5P_CLKSRC_MASK_PERIL0 S5P_CLKREG(0x0C350) -#define S5P_CLKSRC_MASK_PERIL1 S5P_CLKREG(0x0C354) - -#define S5P_CLKDIV_STAT_TOP S5P_CLKREG(0x0C610) - -#define S5P_CLKGATE_IP_CAM S5P_CLKREG(0x0C920) -#define S5P_CLKGATE_IP_IMAGE S5P_CLKREG(0x0C930) -#define S5P_CLKGATE_IP_LCD0 S5P_CLKREG(0x0C934) -#define S5P_CLKGATE_IP_LCD1 S5P_CLKREG(0x0C938) -#define S5P_CLKGATE_IP_FSYS S5P_CLKREG(0x0C940) -#define S5P_CLKGATE_IP_PERIL S5P_CLKREG(0x0C950) -#define S5P_CLKGATE_IP_PERIR S5P_CLKREG(0x0C960) - -#define S5P_CLKSRC_DMC S5P_CLKREG(0x10200) -#define S5P_CLKDIV_DMC0 S5P_CLKREG(0x10500) -#define S5P_CLKDIV_STAT_DMC0 S5P_CLKREG(0x10600) - -#define S5P_APLL_LOCK S5P_CLKREG(0x14000) -#define S5P_MPLL_LOCK S5P_CLKREG(0x14004) -#define S5P_APLL_CON0 S5P_CLKREG(0x14100) -#define S5P_APLL_CON1 S5P_CLKREG(0x14104) -#define S5P_MPLL_CON0 S5P_CLKREG(0x14108) -#define S5P_MPLL_CON1 S5P_CLKREG(0x1410C) - -#define S5P_CLKSRC_CPU S5P_CLKREG(0x14200) -#define S5P_CLKMUX_STATCPU S5P_CLKREG(0x14400) - -#define S5P_CLKDIV_CPU S5P_CLKREG(0x14500) -#define S5P_CLKDIV_CPU1 S5P_CLKREG(0x14504) -#define S5P_CLKDIV_STATCPU S5P_CLKREG(0x14600) -#define S5P_CLKDIV_STATCPU1 S5P_CLKREG(0x14604) - -#define S5P_CLKGATE_SCLKCPU S5P_CLKREG(0x14800) - -/* APLL_LOCK */ -#define S5P_APLL_LOCKTIME (0x1C20) /* 300us */ - -/* APLL_CON0 */ -#define S5P_APLLCON0_ENABLE_SHIFT (31) -#define S5P_APLLCON0_LOCKED_SHIFT (29) -#define S5P_APLL_VAL_1000 ((250 << 16) | (6 << 8) | 1) -#define S5P_APLL_VAL_800 ((200 << 16) | (6 << 8) | 1) - -/* CLK_SRC_CPU */ -#define S5P_CLKSRC_CPU_MUXCORE_SHIFT (16) -#define S5P_CLKMUX_STATCPU_MUXCORE_MASK (0x7 << S5P_CLKSRC_CPU_MUXCORE_SHIFT) - -/* CLKDIV_CPU0 */ -#define S5P_CLKDIV_CPU0_CORE_SHIFT (0) -#define S5P_CLKDIV_CPU0_CORE_MASK (0x7 << S5P_CLKDIV_CPU0_CORE_SHIFT) -#define S5P_CLKDIV_CPU0_COREM0_SHIFT (4) -#define S5P_CLKDIV_CPU0_COREM0_MASK (0x7 << S5P_CLKDIV_CPU0_COREM0_SHIFT) -#define S5P_CLKDIV_CPU0_COREM1_SHIFT (8) -#define S5P_CLKDIV_CPU0_COREM1_MASK (0x7 << S5P_CLKDIV_CPU0_COREM1_SHIFT) -#define S5P_CLKDIV_CPU0_PERIPH_SHIFT (12) -#define S5P_CLKDIV_CPU0_PERIPH_MASK (0x7 << S5P_CLKDIV_CPU0_PERIPH_SHIFT) -#define S5P_CLKDIV_CPU0_ATB_SHIFT (16) -#define S5P_CLKDIV_CPU0_ATB_MASK (0x7 << S5P_CLKDIV_CPU0_ATB_SHIFT) -#define S5P_CLKDIV_CPU0_PCLKDBG_SHIFT (20) -#define S5P_CLKDIV_CPU0_PCLKDBG_MASK (0x7 << S5P_CLKDIV_CPU0_PCLKDBG_SHIFT) -#define S5P_CLKDIV_CPU0_APLL_SHIFT (24) -#define S5P_CLKDIV_CPU0_APLL_MASK (0x7 << S5P_CLKDIV_CPU0_APLL_SHIFT) - -/* CLKDIV_DMC0 */ -#define S5P_CLKDIV_DMC0_ACP_SHIFT (0) -#define S5P_CLKDIV_DMC0_ACP_MASK (0x7 << S5P_CLKDIV_DMC0_ACP_SHIFT) -#define S5P_CLKDIV_DMC0_ACPPCLK_SHIFT (4) -#define S5P_CLKDIV_DMC0_ACPPCLK_MASK (0x7 << S5P_CLKDIV_DMC0_ACPPCLK_SHIFT) -#define S5P_CLKDIV_DMC0_DPHY_SHIFT (8) -#define S5P_CLKDIV_DMC0_DPHY_MASK (0x7 << S5P_CLKDIV_DMC0_DPHY_SHIFT) -#define S5P_CLKDIV_DMC0_DMC_SHIFT (12) -#define S5P_CLKDIV_DMC0_DMC_MASK (0x7 << S5P_CLKDIV_DMC0_DMC_SHIFT) -#define S5P_CLKDIV_DMC0_DMCD_SHIFT (16) -#define S5P_CLKDIV_DMC0_DMCD_MASK (0x7 << S5P_CLKDIV_DMC0_DMCD_SHIFT) -#define S5P_CLKDIV_DMC0_DMCP_SHIFT (20) -#define S5P_CLKDIV_DMC0_DMCP_MASK (0x7 << S5P_CLKDIV_DMC0_DMCP_SHIFT) -#define S5P_CLKDIV_DMC0_COPY2_SHIFT (24) -#define S5P_CLKDIV_DMC0_COPY2_MASK (0x7 << S5P_CLKDIV_DMC0_COPY2_SHIFT) -#define S5P_CLKDIV_DMC0_CORETI_SHIFT (28) -#define S5P_CLKDIV_DMC0_CORETI_MASK (0x7 << S5P_CLKDIV_DMC0_CORETI_SHIFT) - -/* CLKDIV_TOP */ -#define S5P_CLKDIV_TOP_ACLK200_SHIFT (0) -#define S5P_CLKDIV_TOP_ACLK200_MASK (0x7 << S5P_CLKDIV_TOP_ACLK200_SHIFT) -#define S5P_CLKDIV_TOP_ACLK100_SHIFT (4) -#define S5P_CLKDIV_TOP_ACLK100_MASK (0xf << S5P_CLKDIV_TOP_ACLK100_SHIFT) -#define S5P_CLKDIV_TOP_ACLK160_SHIFT (8) -#define S5P_CLKDIV_TOP_ACLK160_MASK (0x7 << S5P_CLKDIV_TOP_ACLK160_SHIFT) -#define S5P_CLKDIV_TOP_ACLK133_SHIFT (12) -#define S5P_CLKDIV_TOP_ACLK133_MASK (0x7 << S5P_CLKDIV_TOP_ACLK133_SHIFT) -#define S5P_CLKDIV_TOP_ONENAND_SHIFT (16) -#define S5P_CLKDIV_TOP_ONENAND_MASK (0x7 << S5P_CLKDIV_TOP_ONENAND_SHIFT) - -/* CLKDIV_LEFTBUS / CLKDIV_RIGHTBUS*/ -#define S5P_CLKDIV_BUS_GDLR_SHIFT (0) -#define S5P_CLKDIV_BUS_GDLR_MASK (0x7 << S5P_CLKDIV_BUS_GDLR_SHIFT) -#define S5P_CLKDIV_BUS_GPLR_SHIFT (4) -#define S5P_CLKDIV_BUS_GPLR_MASK (0x7 << S5P_CLKDIV_BUS_GPLR_SHIFT) - -/* Compatibility defines */ - -#define S5P_EPLL_CON S5P_EPLL_CON0 - -#endif /* __ASM_ARCH_REGS_CLOCK_H */ -- cgit v1.2.3-18-g5258 From c81a24ff8f4efda02ffaa0c3170155550bcae339 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Mon, 14 Feb 2011 16:10:55 +0900 Subject: ARM: EXYNOS4: Update IRQ part This patch updates IRQ part of EXYNOS4 according to the change of ARCH name, EXYNOS4. Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos4/include/mach/irqs.h | 146 ++++++++++++++++ arch/arm/mach-exynos4/include/mach/regs-irq.h | 19 +++ arch/arm/mach-exynos4/irq-combiner.c | 127 ++++++++++++++ arch/arm/mach-exynos4/irq-eint.c | 229 ++++++++++++++++++++++++++ arch/arm/mach-s5pv310/include/mach/irqs.h | 146 ---------------- arch/arm/mach-s5pv310/include/mach/regs-irq.h | 19 --- arch/arm/mach-s5pv310/irq-combiner.c | 127 -------------- arch/arm/mach-s5pv310/irq-eint.c | 229 -------------------------- 8 files changed, 521 insertions(+), 521 deletions(-) create mode 100644 arch/arm/mach-exynos4/include/mach/irqs.h create mode 100644 arch/arm/mach-exynos4/include/mach/regs-irq.h create mode 100644 arch/arm/mach-exynos4/irq-combiner.c create mode 100644 arch/arm/mach-exynos4/irq-eint.c delete mode 100644 arch/arm/mach-s5pv310/include/mach/irqs.h delete mode 100644 arch/arm/mach-s5pv310/include/mach/regs-irq.h delete mode 100644 arch/arm/mach-s5pv310/irq-combiner.c delete mode 100644 arch/arm/mach-s5pv310/irq-eint.c (limited to 'arch') diff --git a/arch/arm/mach-exynos4/include/mach/irqs.h b/arch/arm/mach-exynos4/include/mach/irqs.h new file mode 100644 index 00000000000..2dc590085a9 --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/irqs.h @@ -0,0 +1,146 @@ +/* linux/arch/arm/mach-exynos4/include/mach/irqs.h + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4 - IRQ definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_IRQS_H +#define __ASM_ARCH_IRQS_H __FILE__ + +#include + +/* PPI: Private Peripheral Interrupt */ + +#define IRQ_PPI(x) S5P_IRQ(x+16) + +#define IRQ_LOCALTIMER IRQ_PPI(13) + +/* SPI: Shared Peripheral Interrupt */ + +#define IRQ_SPI(x) S5P_IRQ(x+32) + +#define IRQ_MCT1 IRQ_SPI(35) + +#define IRQ_EINT0 IRQ_SPI(40) +#define IRQ_EINT1 IRQ_SPI(41) +#define IRQ_EINT2 IRQ_SPI(42) +#define IRQ_EINT3 IRQ_SPI(43) +#define IRQ_USB_HSOTG IRQ_SPI(44) +#define IRQ_USB_HOST IRQ_SPI(45) +#define IRQ_MODEM_IF IRQ_SPI(46) +#define IRQ_ROTATOR IRQ_SPI(47) +#define IRQ_JPEG IRQ_SPI(48) +#define IRQ_2D IRQ_SPI(49) +#define IRQ_PCIE IRQ_SPI(50) +#define IRQ_MCT0 IRQ_SPI(51) +#define IRQ_MFC IRQ_SPI(52) +#define IRQ_AUDIO_SS IRQ_SPI(54) +#define IRQ_AC97 IRQ_SPI(55) +#define IRQ_SPDIF IRQ_SPI(56) +#define IRQ_KEYPAD IRQ_SPI(57) +#define IRQ_INTFEEDCTRL_SSS IRQ_SPI(58) +#define IRQ_SLIMBUS IRQ_SPI(59) +#define IRQ_PMU IRQ_SPI(60) +#define IRQ_TSI IRQ_SPI(61) +#define IRQ_SATA IRQ_SPI(62) +#define IRQ_GPS IRQ_SPI(63) + +#define MAX_IRQ_IN_COMBINER 8 +#define COMBINER_GROUP(x) ((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(64)) +#define COMBINER_IRQ(x, y) (COMBINER_GROUP(x) + y) + +#define IRQ_SYSMMU_MDMA0_0 COMBINER_IRQ(4, 0) +#define IRQ_SYSMMU_SSS_0 COMBINER_IRQ(4, 1) +#define IRQ_SYSMMU_FIMC0_0 COMBINER_IRQ(4, 2) +#define IRQ_SYSMMU_FIMC1_0 COMBINER_IRQ(4, 3) +#define IRQ_SYSMMU_FIMC2_0 COMBINER_IRQ(4, 4) +#define IRQ_SYSMMU_FIMC3_0 COMBINER_IRQ(4, 5) +#define IRQ_SYSMMU_JPEG_0 COMBINER_IRQ(4, 6) +#define IRQ_SYSMMU_2D_0 COMBINER_IRQ(4, 7) + +#define IRQ_SYSMMU_ROTATOR_0 COMBINER_IRQ(5, 0) +#define IRQ_SYSMMU_MDMA1_0 COMBINER_IRQ(5, 1) +#define IRQ_SYSMMU_LCD0_M0_0 COMBINER_IRQ(5, 2) +#define IRQ_SYSMMU_LCD1_M1_0 COMBINER_IRQ(5, 3) +#define IRQ_SYSMMU_TV_M0_0 COMBINER_IRQ(5, 4) +#define IRQ_SYSMMU_MFC_M0_0 COMBINER_IRQ(5, 5) +#define IRQ_SYSMMU_MFC_M1_0 COMBINER_IRQ(5, 6) +#define IRQ_SYSMMU_PCIE_0 COMBINER_IRQ(5, 7) + +#define IRQ_PDMA0 COMBINER_IRQ(21, 0) +#define IRQ_PDMA1 COMBINER_IRQ(21, 1) + +#define IRQ_TIMER0_VIC COMBINER_IRQ(22, 0) +#define IRQ_TIMER1_VIC COMBINER_IRQ(22, 1) +#define IRQ_TIMER2_VIC COMBINER_IRQ(22, 2) +#define IRQ_TIMER3_VIC COMBINER_IRQ(22, 3) +#define IRQ_TIMER4_VIC COMBINER_IRQ(22, 4) + +#define IRQ_RTC_ALARM COMBINER_IRQ(23, 0) +#define IRQ_RTC_TIC COMBINER_IRQ(23, 1) + +#define IRQ_UART0 COMBINER_IRQ(26, 0) +#define IRQ_UART1 COMBINER_IRQ(26, 1) +#define IRQ_UART2 COMBINER_IRQ(26, 2) +#define IRQ_UART3 COMBINER_IRQ(26, 3) +#define IRQ_UART4 COMBINER_IRQ(26, 4) + +#define IRQ_IIC COMBINER_IRQ(27, 0) +#define IRQ_IIC1 COMBINER_IRQ(27, 1) +#define IRQ_IIC2 COMBINER_IRQ(27, 2) +#define IRQ_IIC3 COMBINER_IRQ(27, 3) +#define IRQ_IIC4 COMBINER_IRQ(27, 4) +#define IRQ_IIC5 COMBINER_IRQ(27, 5) +#define IRQ_IIC6 COMBINER_IRQ(27, 6) +#define IRQ_IIC7 COMBINER_IRQ(27, 7) + +#define IRQ_HSMMC0 COMBINER_IRQ(29, 0) +#define IRQ_HSMMC1 COMBINER_IRQ(29, 1) +#define IRQ_HSMMC2 COMBINER_IRQ(29, 2) +#define IRQ_HSMMC3 COMBINER_IRQ(29, 3) + +#define IRQ_MIPI_CSIS0 COMBINER_IRQ(30, 0) +#define IRQ_MIPI_CSIS1 COMBINER_IRQ(30, 1) + +#define IRQ_ONENAND_AUDI COMBINER_IRQ(34, 0) + +#define IRQ_MCT_L1 COMBINER_IRQ(35, 3) + +#define IRQ_EINT4 COMBINER_IRQ(37, 0) +#define IRQ_EINT5 COMBINER_IRQ(37, 1) +#define IRQ_EINT6 COMBINER_IRQ(37, 2) +#define IRQ_EINT7 COMBINER_IRQ(37, 3) +#define IRQ_EINT8 COMBINER_IRQ(38, 0) + +#define IRQ_EINT9 COMBINER_IRQ(38, 1) +#define IRQ_EINT10 COMBINER_IRQ(38, 2) +#define IRQ_EINT11 COMBINER_IRQ(38, 3) +#define IRQ_EINT12 COMBINER_IRQ(38, 4) +#define IRQ_EINT13 COMBINER_IRQ(38, 5) +#define IRQ_EINT14 COMBINER_IRQ(38, 6) +#define IRQ_EINT15 COMBINER_IRQ(38, 7) + +#define IRQ_EINT16_31 COMBINER_IRQ(39, 0) + +#define IRQ_MCT_L0 COMBINER_IRQ(51, 0) + +#define IRQ_WDT COMBINER_IRQ(53, 0) + +#define MAX_COMBINER_NR 54 + +#define S5P_IRQ_EINT_BASE COMBINER_IRQ(MAX_COMBINER_NR, 0) + +#define S5P_EINT_BASE1 (S5P_IRQ_EINT_BASE + 0) +#define S5P_EINT_BASE2 (S5P_IRQ_EINT_BASE + 16) + +/* Set the default NR_IRQS */ + +#define NR_IRQS (S5P_IRQ_EINT_BASE + 32) + +#endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-exynos4/include/mach/regs-irq.h b/arch/arm/mach-exynos4/include/mach/regs-irq.h new file mode 100644 index 00000000000..9c7b4bfd546 --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/regs-irq.h @@ -0,0 +1,19 @@ +/* linux/arch/arm/mach-exynos4/include/mach/regs-irq.h + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4 - IRQ register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_IRQ_H +#define __ASM_ARCH_REGS_IRQ_H __FILE__ + +#include +#include + +#endif /* __ASM_ARCH_REGS_IRQ_H */ diff --git a/arch/arm/mach-exynos4/irq-combiner.c b/arch/arm/mach-exynos4/irq-combiner.c new file mode 100644 index 00000000000..31618d91ce1 --- /dev/null +++ b/arch/arm/mach-exynos4/irq-combiner.c @@ -0,0 +1,127 @@ +/* linux/arch/arm/mach-exynos4/irq-combiner.c + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Based on arch/arm/common/gic.c + * + * IRQ COMBINER support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include + +#include + +#define COMBINER_ENABLE_SET 0x0 +#define COMBINER_ENABLE_CLEAR 0x4 +#define COMBINER_INT_STATUS 0xC + +static DEFINE_SPINLOCK(irq_controller_lock); + +struct combiner_chip_data { + unsigned int irq_offset; + unsigned int irq_mask; + void __iomem *base; +}; + +static struct combiner_chip_data combiner_data[MAX_COMBINER_NR]; + +static inline void __iomem *combiner_base(struct irq_data *data) +{ + struct combiner_chip_data *combiner_data = + irq_data_get_irq_chip_data(data); + + return combiner_data->base; +} + +static void combiner_mask_irq(struct irq_data *data) +{ + u32 mask = 1 << (data->irq % 32); + + __raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_CLEAR); +} + +static void combiner_unmask_irq(struct irq_data *data) +{ + u32 mask = 1 << (data->irq % 32); + + __raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_SET); +} + +static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc) +{ + struct combiner_chip_data *chip_data = get_irq_data(irq); + struct irq_chip *chip = get_irq_chip(irq); + unsigned int cascade_irq, combiner_irq; + unsigned long status; + + /* primary controller ack'ing */ + chip->irq_ack(&desc->irq_data); + + spin_lock(&irq_controller_lock); + status = __raw_readl(chip_data->base + COMBINER_INT_STATUS); + spin_unlock(&irq_controller_lock); + status &= chip_data->irq_mask; + + if (status == 0) + goto out; + + combiner_irq = __ffs(status); + + cascade_irq = combiner_irq + (chip_data->irq_offset & ~31); + if (unlikely(cascade_irq >= NR_IRQS)) + do_bad_IRQ(cascade_irq, desc); + else + generic_handle_irq(cascade_irq); + + out: + /* primary controller unmasking */ + chip->irq_unmask(&desc->irq_data); +} + +static struct irq_chip combiner_chip = { + .name = "COMBINER", + .irq_mask = combiner_mask_irq, + .irq_unmask = combiner_unmask_irq, +}; + +void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq) +{ + if (combiner_nr >= MAX_COMBINER_NR) + BUG(); + if (set_irq_data(irq, &combiner_data[combiner_nr]) != 0) + BUG(); + set_irq_chained_handler(irq, combiner_handle_cascade_irq); +} + +void __init combiner_init(unsigned int combiner_nr, void __iomem *base, + unsigned int irq_start) +{ + unsigned int i; + + if (combiner_nr >= MAX_COMBINER_NR) + BUG(); + + combiner_data[combiner_nr].base = base; + combiner_data[combiner_nr].irq_offset = irq_start; + combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3); + + /* Disable all interrupts */ + + __raw_writel(combiner_data[combiner_nr].irq_mask, + base + COMBINER_ENABLE_CLEAR); + + /* Setup the Linux IRQ subsystem */ + + for (i = irq_start; i < combiner_data[combiner_nr].irq_offset + + MAX_IRQ_IN_COMBINER; i++) { + set_irq_chip(i, &combiner_chip); + set_irq_chip_data(i, &combiner_data[combiner_nr]); + set_irq_handler(i, handle_level_irq); + set_irq_flags(i, IRQF_VALID | IRQF_PROBE); + } +} diff --git a/arch/arm/mach-exynos4/irq-eint.c b/arch/arm/mach-exynos4/irq-eint.c new file mode 100644 index 00000000000..4f7ad4a796e --- /dev/null +++ b/arch/arm/mach-exynos4/irq-eint.c @@ -0,0 +1,229 @@ +/* linux/arch/arm/mach-exynos4/irq-eint.c + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4 - IRQ EINT support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include + +static DEFINE_SPINLOCK(eint_lock); + +static unsigned int eint0_15_data[16]; + +static unsigned int exynos4_get_irq_nr(unsigned int number) +{ + u32 ret = 0; + + switch (number) { + case 0 ... 3: + ret = (number + IRQ_EINT0); + break; + case 4 ... 7: + ret = (number + (IRQ_EINT4 - 4)); + break; + case 8 ... 15: + ret = (number + (IRQ_EINT8 - 8)); + break; + default: + printk(KERN_ERR "number available : %d\n", number); + } + + return ret; +} + +static inline void exynos4_irq_eint_mask(struct irq_data *data) +{ + u32 mask; + + spin_lock(&eint_lock); + mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq))); + mask |= eint_irq_to_bit(data->irq); + __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq))); + spin_unlock(&eint_lock); +} + +static void exynos4_irq_eint_unmask(struct irq_data *data) +{ + u32 mask; + + spin_lock(&eint_lock); + mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq))); + mask &= ~(eint_irq_to_bit(data->irq)); + __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq))); + spin_unlock(&eint_lock); +} + +static inline void exynos4_irq_eint_ack(struct irq_data *data) +{ + __raw_writel(eint_irq_to_bit(data->irq), + S5P_EINT_PEND(EINT_REG_NR(data->irq))); +} + +static void exynos4_irq_eint_maskack(struct irq_data *data) +{ + exynos4_irq_eint_mask(data); + exynos4_irq_eint_ack(data); +} + +static int exynos4_irq_eint_set_type(struct irq_data *data, unsigned int type) +{ + int offs = EINT_OFFSET(data->irq); + int shift; + u32 ctrl, mask; + u32 newvalue = 0; + + switch (type) { + case IRQ_TYPE_EDGE_RISING: + newvalue = S5P_IRQ_TYPE_EDGE_RISING; + break; + + case IRQ_TYPE_EDGE_FALLING: + newvalue = S5P_IRQ_TYPE_EDGE_FALLING; + break; + + case IRQ_TYPE_EDGE_BOTH: + newvalue = S5P_IRQ_TYPE_EDGE_BOTH; + break; + + case IRQ_TYPE_LEVEL_LOW: + newvalue = S5P_IRQ_TYPE_LEVEL_LOW; + break; + + case IRQ_TYPE_LEVEL_HIGH: + newvalue = S5P_IRQ_TYPE_LEVEL_HIGH; + break; + + default: + printk(KERN_ERR "No such irq type %d", type); + return -EINVAL; + } + + shift = (offs & 0x7) * 4; + mask = 0x7 << shift; + + spin_lock(&eint_lock); + ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(data->irq))); + ctrl &= ~mask; + ctrl |= newvalue << shift; + __raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(data->irq))); + spin_unlock(&eint_lock); + + switch (offs) { + case 0 ... 7: + s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE); + break; + case 8 ... 15: + s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE); + break; + case 16 ... 23: + s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE); + break; + case 24 ... 31: + s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE); + break; + default: + printk(KERN_ERR "No such irq number %d", offs); + } + + return 0; +} + +static struct irq_chip exynos4_irq_eint = { + .name = "exynos4-eint", + .irq_mask = exynos4_irq_eint_mask, + .irq_unmask = exynos4_irq_eint_unmask, + .irq_mask_ack = exynos4_irq_eint_maskack, + .irq_ack = exynos4_irq_eint_ack, + .irq_set_type = exynos4_irq_eint_set_type, +#ifdef CONFIG_PM + .irq_set_wake = s3c_irqext_wake, +#endif +}; + +/* exynos4_irq_demux_eint + * + * This function demuxes the IRQ from from EINTs 16 to 31. + * It is designed to be inlined into the specific handler + * s5p_irq_demux_eintX_Y. + * + * Each EINT pend/mask registers handle eight of them. + */ +static inline void exynos4_irq_demux_eint(unsigned int start) +{ + unsigned int irq; + + u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start))); + u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start))); + + status &= ~mask; + status &= 0xff; + + while (status) { + irq = fls(status) - 1; + generic_handle_irq(irq + start); + status &= ~(1 << irq); + } +} + +static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc) +{ + exynos4_irq_demux_eint(IRQ_EINT(16)); + exynos4_irq_demux_eint(IRQ_EINT(24)); +} + +static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc) +{ + u32 *irq_data = get_irq_data(irq); + struct irq_chip *chip = get_irq_chip(irq); + + chip->irq_mask(&desc->irq_data); + + if (chip->irq_ack) + chip->irq_ack(&desc->irq_data); + + generic_handle_irq(*irq_data); + + chip->irq_unmask(&desc->irq_data); +} + +int __init exynos4_init_irq_eint(void) +{ + int irq; + + for (irq = 0 ; irq <= 31 ; irq++) { + set_irq_chip(IRQ_EINT(irq), &exynos4_irq_eint); + set_irq_handler(IRQ_EINT(irq), handle_level_irq); + set_irq_flags(IRQ_EINT(irq), IRQF_VALID); + } + + set_irq_chained_handler(IRQ_EINT16_31, exynos4_irq_demux_eint16_31); + + for (irq = 0 ; irq <= 15 ; irq++) { + eint0_15_data[irq] = IRQ_EINT(irq); + + set_irq_data(exynos4_get_irq_nr(irq), &eint0_15_data[irq]); + set_irq_chained_handler(exynos4_get_irq_nr(irq), + exynos4_irq_eint0_15); + } + + return 0; +} + +arch_initcall(exynos4_init_irq_eint); diff --git a/arch/arm/mach-s5pv310/include/mach/irqs.h b/arch/arm/mach-s5pv310/include/mach/irqs.h deleted file mode 100644 index 536b0b59fc8..00000000000 --- a/arch/arm/mach-s5pv310/include/mach/irqs.h +++ /dev/null @@ -1,146 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/irqs.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5PV310 - IRQ definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H __FILE__ - -#include - -/* PPI: Private Peripheral Interrupt */ - -#define IRQ_PPI(x) S5P_IRQ(x+16) - -#define IRQ_LOCALTIMER IRQ_PPI(13) - -/* SPI: Shared Peripheral Interrupt */ - -#define IRQ_SPI(x) S5P_IRQ(x+32) - -#define IRQ_MCT1 IRQ_SPI(35) - -#define IRQ_EINT0 IRQ_SPI(40) -#define IRQ_EINT1 IRQ_SPI(41) -#define IRQ_EINT2 IRQ_SPI(42) -#define IRQ_EINT3 IRQ_SPI(43) -#define IRQ_USB_HSOTG IRQ_SPI(44) -#define IRQ_USB_HOST IRQ_SPI(45) -#define IRQ_MODEM_IF IRQ_SPI(46) -#define IRQ_ROTATOR IRQ_SPI(47) -#define IRQ_JPEG IRQ_SPI(48) -#define IRQ_2D IRQ_SPI(49) -#define IRQ_PCIE IRQ_SPI(50) -#define IRQ_MCT0 IRQ_SPI(51) -#define IRQ_MFC IRQ_SPI(52) -#define IRQ_AUDIO_SS IRQ_SPI(54) -#define IRQ_AC97 IRQ_SPI(55) -#define IRQ_SPDIF IRQ_SPI(56) -#define IRQ_KEYPAD IRQ_SPI(57) -#define IRQ_INTFEEDCTRL_SSS IRQ_SPI(58) -#define IRQ_SLIMBUS IRQ_SPI(59) -#define IRQ_PMU IRQ_SPI(60) -#define IRQ_TSI IRQ_SPI(61) -#define IRQ_SATA IRQ_SPI(62) -#define IRQ_GPS IRQ_SPI(63) - -#define MAX_IRQ_IN_COMBINER 8 -#define COMBINER_GROUP(x) ((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(64)) -#define COMBINER_IRQ(x, y) (COMBINER_GROUP(x) + y) - -#define IRQ_SYSMMU_MDMA0_0 COMBINER_IRQ(4, 0) -#define IRQ_SYSMMU_SSS_0 COMBINER_IRQ(4, 1) -#define IRQ_SYSMMU_FIMC0_0 COMBINER_IRQ(4, 2) -#define IRQ_SYSMMU_FIMC1_0 COMBINER_IRQ(4, 3) -#define IRQ_SYSMMU_FIMC2_0 COMBINER_IRQ(4, 4) -#define IRQ_SYSMMU_FIMC3_0 COMBINER_IRQ(4, 5) -#define IRQ_SYSMMU_JPEG_0 COMBINER_IRQ(4, 6) -#define IRQ_SYSMMU_2D_0 COMBINER_IRQ(4, 7) - -#define IRQ_SYSMMU_ROTATOR_0 COMBINER_IRQ(5, 0) -#define IRQ_SYSMMU_MDMA1_0 COMBINER_IRQ(5, 1) -#define IRQ_SYSMMU_LCD0_M0_0 COMBINER_IRQ(5, 2) -#define IRQ_SYSMMU_LCD1_M1_0 COMBINER_IRQ(5, 3) -#define IRQ_SYSMMU_TV_M0_0 COMBINER_IRQ(5, 4) -#define IRQ_SYSMMU_MFC_M0_0 COMBINER_IRQ(5, 5) -#define IRQ_SYSMMU_MFC_M1_0 COMBINER_IRQ(5, 6) -#define IRQ_SYSMMU_PCIE_0 COMBINER_IRQ(5, 7) - -#define IRQ_PDMA0 COMBINER_IRQ(21, 0) -#define IRQ_PDMA1 COMBINER_IRQ(21, 1) - -#define IRQ_TIMER0_VIC COMBINER_IRQ(22, 0) -#define IRQ_TIMER1_VIC COMBINER_IRQ(22, 1) -#define IRQ_TIMER2_VIC COMBINER_IRQ(22, 2) -#define IRQ_TIMER3_VIC COMBINER_IRQ(22, 3) -#define IRQ_TIMER4_VIC COMBINER_IRQ(22, 4) - -#define IRQ_RTC_ALARM COMBINER_IRQ(23, 0) -#define IRQ_RTC_TIC COMBINER_IRQ(23, 1) - -#define IRQ_UART0 COMBINER_IRQ(26, 0) -#define IRQ_UART1 COMBINER_IRQ(26, 1) -#define IRQ_UART2 COMBINER_IRQ(26, 2) -#define IRQ_UART3 COMBINER_IRQ(26, 3) -#define IRQ_UART4 COMBINER_IRQ(26, 4) - -#define IRQ_IIC COMBINER_IRQ(27, 0) -#define IRQ_IIC1 COMBINER_IRQ(27, 1) -#define IRQ_IIC2 COMBINER_IRQ(27, 2) -#define IRQ_IIC3 COMBINER_IRQ(27, 3) -#define IRQ_IIC4 COMBINER_IRQ(27, 4) -#define IRQ_IIC5 COMBINER_IRQ(27, 5) -#define IRQ_IIC6 COMBINER_IRQ(27, 6) -#define IRQ_IIC7 COMBINER_IRQ(27, 7) - -#define IRQ_HSMMC0 COMBINER_IRQ(29, 0) -#define IRQ_HSMMC1 COMBINER_IRQ(29, 1) -#define IRQ_HSMMC2 COMBINER_IRQ(29, 2) -#define IRQ_HSMMC3 COMBINER_IRQ(29, 3) - -#define IRQ_MIPI_CSIS0 COMBINER_IRQ(30, 0) -#define IRQ_MIPI_CSIS1 COMBINER_IRQ(30, 1) - -#define IRQ_ONENAND_AUDI COMBINER_IRQ(34, 0) - -#define IRQ_MCT_L1 COMBINER_IRQ(35, 3) - -#define IRQ_EINT4 COMBINER_IRQ(37, 0) -#define IRQ_EINT5 COMBINER_IRQ(37, 1) -#define IRQ_EINT6 COMBINER_IRQ(37, 2) -#define IRQ_EINT7 COMBINER_IRQ(37, 3) -#define IRQ_EINT8 COMBINER_IRQ(38, 0) - -#define IRQ_EINT9 COMBINER_IRQ(38, 1) -#define IRQ_EINT10 COMBINER_IRQ(38, 2) -#define IRQ_EINT11 COMBINER_IRQ(38, 3) -#define IRQ_EINT12 COMBINER_IRQ(38, 4) -#define IRQ_EINT13 COMBINER_IRQ(38, 5) -#define IRQ_EINT14 COMBINER_IRQ(38, 6) -#define IRQ_EINT15 COMBINER_IRQ(38, 7) - -#define IRQ_EINT16_31 COMBINER_IRQ(39, 0) - -#define IRQ_MCT_L0 COMBINER_IRQ(51, 0) - -#define IRQ_WDT COMBINER_IRQ(53, 0) - -#define MAX_COMBINER_NR 54 - -#define S5P_IRQ_EINT_BASE COMBINER_IRQ(MAX_COMBINER_NR, 0) - -#define S5P_EINT_BASE1 (S5P_IRQ_EINT_BASE + 0) -#define S5P_EINT_BASE2 (S5P_IRQ_EINT_BASE + 16) - -/* Set the default NR_IRQS */ - -#define NR_IRQS (S5P_IRQ_EINT_BASE + 32) - -#endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/regs-irq.h b/arch/arm/mach-s5pv310/include/mach/regs-irq.h deleted file mode 100644 index c6e09c7f916..00000000000 --- a/arch/arm/mach-s5pv310/include/mach/regs-irq.h +++ /dev/null @@ -1,19 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/regs-irq.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5PV310 - IRQ register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_IRQ_H -#define __ASM_ARCH_REGS_IRQ_H __FILE__ - -#include -#include - -#endif /* __ASM_ARCH_REGS_IRQ_H */ diff --git a/arch/arm/mach-s5pv310/irq-combiner.c b/arch/arm/mach-s5pv310/irq-combiner.c deleted file mode 100644 index 1ea4a9e83bb..00000000000 --- a/arch/arm/mach-s5pv310/irq-combiner.c +++ /dev/null @@ -1,127 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/irq-combiner.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Based on arch/arm/common/gic.c - * - * IRQ COMBINER support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include - -#include - -#define COMBINER_ENABLE_SET 0x0 -#define COMBINER_ENABLE_CLEAR 0x4 -#define COMBINER_INT_STATUS 0xC - -static DEFINE_SPINLOCK(irq_controller_lock); - -struct combiner_chip_data { - unsigned int irq_offset; - unsigned int irq_mask; - void __iomem *base; -}; - -static struct combiner_chip_data combiner_data[MAX_COMBINER_NR]; - -static inline void __iomem *combiner_base(struct irq_data *data) -{ - struct combiner_chip_data *combiner_data = - irq_data_get_irq_chip_data(data); - - return combiner_data->base; -} - -static void combiner_mask_irq(struct irq_data *data) -{ - u32 mask = 1 << (data->irq % 32); - - __raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_CLEAR); -} - -static void combiner_unmask_irq(struct irq_data *data) -{ - u32 mask = 1 << (data->irq % 32); - - __raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_SET); -} - -static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc) -{ - struct combiner_chip_data *chip_data = get_irq_data(irq); - struct irq_chip *chip = get_irq_chip(irq); - unsigned int cascade_irq, combiner_irq; - unsigned long status; - - /* primary controller ack'ing */ - chip->irq_ack(&desc->irq_data); - - spin_lock(&irq_controller_lock); - status = __raw_readl(chip_data->base + COMBINER_INT_STATUS); - spin_unlock(&irq_controller_lock); - status &= chip_data->irq_mask; - - if (status == 0) - goto out; - - combiner_irq = __ffs(status); - - cascade_irq = combiner_irq + (chip_data->irq_offset & ~31); - if (unlikely(cascade_irq >= NR_IRQS)) - do_bad_IRQ(cascade_irq, desc); - else - generic_handle_irq(cascade_irq); - - out: - /* primary controller unmasking */ - chip->irq_unmask(&desc->irq_data); -} - -static struct irq_chip combiner_chip = { - .name = "COMBINER", - .irq_mask = combiner_mask_irq, - .irq_unmask = combiner_unmask_irq, -}; - -void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq) -{ - if (combiner_nr >= MAX_COMBINER_NR) - BUG(); - if (set_irq_data(irq, &combiner_data[combiner_nr]) != 0) - BUG(); - set_irq_chained_handler(irq, combiner_handle_cascade_irq); -} - -void __init combiner_init(unsigned int combiner_nr, void __iomem *base, - unsigned int irq_start) -{ - unsigned int i; - - if (combiner_nr >= MAX_COMBINER_NR) - BUG(); - - combiner_data[combiner_nr].base = base; - combiner_data[combiner_nr].irq_offset = irq_start; - combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3); - - /* Disable all interrupts */ - - __raw_writel(combiner_data[combiner_nr].irq_mask, - base + COMBINER_ENABLE_CLEAR); - - /* Setup the Linux IRQ subsystem */ - - for (i = irq_start; i < combiner_data[combiner_nr].irq_offset - + MAX_IRQ_IN_COMBINER; i++) { - set_irq_chip(i, &combiner_chip); - set_irq_chip_data(i, &combiner_data[combiner_nr]); - set_irq_handler(i, handle_level_irq); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); - } -} diff --git a/arch/arm/mach-s5pv310/irq-eint.c b/arch/arm/mach-s5pv310/irq-eint.c deleted file mode 100644 index 477bd9e97f0..00000000000 --- a/arch/arm/mach-s5pv310/irq-eint.c +++ /dev/null @@ -1,229 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/irq-eint.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5PV310 - IRQ EINT support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include - -static DEFINE_SPINLOCK(eint_lock); - -static unsigned int eint0_15_data[16]; - -static unsigned int s5pv310_get_irq_nr(unsigned int number) -{ - u32 ret = 0; - - switch (number) { - case 0 ... 3: - ret = (number + IRQ_EINT0); - break; - case 4 ... 7: - ret = (number + (IRQ_EINT4 - 4)); - break; - case 8 ... 15: - ret = (number + (IRQ_EINT8 - 8)); - break; - default: - printk(KERN_ERR "number available : %d\n", number); - } - - return ret; -} - -static inline void s5pv310_irq_eint_mask(struct irq_data *data) -{ - u32 mask; - - spin_lock(&eint_lock); - mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq))); - mask |= eint_irq_to_bit(data->irq); - __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq))); - spin_unlock(&eint_lock); -} - -static void s5pv310_irq_eint_unmask(struct irq_data *data) -{ - u32 mask; - - spin_lock(&eint_lock); - mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq))); - mask &= ~(eint_irq_to_bit(data->irq)); - __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq))); - spin_unlock(&eint_lock); -} - -static inline void s5pv310_irq_eint_ack(struct irq_data *data) -{ - __raw_writel(eint_irq_to_bit(data->irq), - S5P_EINT_PEND(EINT_REG_NR(data->irq))); -} - -static void s5pv310_irq_eint_maskack(struct irq_data *data) -{ - s5pv310_irq_eint_mask(data); - s5pv310_irq_eint_ack(data); -} - -static int s5pv310_irq_eint_set_type(struct irq_data *data, unsigned int type) -{ - int offs = EINT_OFFSET(data->irq); - int shift; - u32 ctrl, mask; - u32 newvalue = 0; - - switch (type) { - case IRQ_TYPE_EDGE_RISING: - newvalue = S5P_IRQ_TYPE_EDGE_RISING; - break; - - case IRQ_TYPE_EDGE_FALLING: - newvalue = S5P_IRQ_TYPE_EDGE_FALLING; - break; - - case IRQ_TYPE_EDGE_BOTH: - newvalue = S5P_IRQ_TYPE_EDGE_BOTH; - break; - - case IRQ_TYPE_LEVEL_LOW: - newvalue = S5P_IRQ_TYPE_LEVEL_LOW; - break; - - case IRQ_TYPE_LEVEL_HIGH: - newvalue = S5P_IRQ_TYPE_LEVEL_HIGH; - break; - - default: - printk(KERN_ERR "No such irq type %d", type); - return -EINVAL; - } - - shift = (offs & 0x7) * 4; - mask = 0x7 << shift; - - spin_lock(&eint_lock); - ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(data->irq))); - ctrl &= ~mask; - ctrl |= newvalue << shift; - __raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(data->irq))); - spin_unlock(&eint_lock); - - switch (offs) { - case 0 ... 7: - s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE); - break; - case 8 ... 15: - s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE); - break; - case 16 ... 23: - s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE); - break; - case 24 ... 31: - s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE); - break; - default: - printk(KERN_ERR "No such irq number %d", offs); - } - - return 0; -} - -static struct irq_chip s5pv310_irq_eint = { - .name = "s5pv310-eint", - .irq_mask = s5pv310_irq_eint_mask, - .irq_unmask = s5pv310_irq_eint_unmask, - .irq_mask_ack = s5pv310_irq_eint_maskack, - .irq_ack = s5pv310_irq_eint_ack, - .irq_set_type = s5pv310_irq_eint_set_type, -#ifdef CONFIG_PM - .irq_set_wake = s3c_irqext_wake, -#endif -}; - -/* s5pv310_irq_demux_eint - * - * This function demuxes the IRQ from from EINTs 16 to 31. - * It is designed to be inlined into the specific handler - * s5p_irq_demux_eintX_Y. - * - * Each EINT pend/mask registers handle eight of them. - */ -static inline void s5pv310_irq_demux_eint(unsigned int start) -{ - unsigned int irq; - - u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start))); - u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start))); - - status &= ~mask; - status &= 0xff; - - while (status) { - irq = fls(status) - 1; - generic_handle_irq(irq + start); - status &= ~(1 << irq); - } -} - -static void s5pv310_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc) -{ - s5pv310_irq_demux_eint(IRQ_EINT(16)); - s5pv310_irq_demux_eint(IRQ_EINT(24)); -} - -static void s5pv310_irq_eint0_15(unsigned int irq, struct irq_desc *desc) -{ - u32 *irq_data = get_irq_data(irq); - struct irq_chip *chip = get_irq_chip(irq); - - chip->irq_mask(&desc->irq_data); - - if (chip->irq_ack) - chip->irq_ack(&desc->irq_data); - - generic_handle_irq(*irq_data); - - chip->irq_unmask(&desc->irq_data); -} - -int __init s5pv310_init_irq_eint(void) -{ - int irq; - - for (irq = 0 ; irq <= 31 ; irq++) { - set_irq_chip(IRQ_EINT(irq), &s5pv310_irq_eint); - set_irq_handler(IRQ_EINT(irq), handle_level_irq); - set_irq_flags(IRQ_EINT(irq), IRQF_VALID); - } - - set_irq_chained_handler(IRQ_EINT16_31, s5pv310_irq_demux_eint16_31); - - for (irq = 0 ; irq <= 15 ; irq++) { - eint0_15_data[irq] = IRQ_EINT(irq); - - set_irq_data(s5pv310_get_irq_nr(irq), &eint0_15_data[irq]); - set_irq_chained_handler(s5pv310_get_irq_nr(irq), - s5pv310_irq_eint0_15); - } - - return 0; -} - -arch_initcall(s5pv310_init_irq_eint); -- cgit v1.2.3-18-g5258 From 3c31336dc5b7ea5b6d6168a8c38c46dd54d65e95 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Mon, 14 Feb 2011 16:13:27 +0900 Subject: ARM: EXYNOS4: Update Timer part This patch updates Timer part of EXYNOS4 according to the change of ARCH name, EXYNOS4. Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos4/include/mach/pwm-clock.h | 70 ++++++ arch/arm/mach-exynos4/localtimer.c | 25 +++ arch/arm/mach-exynos4/time.c | 283 +++++++++++++++++++++++++ arch/arm/mach-s5pv310/include/mach/pwm-clock.h | 70 ------ arch/arm/mach-s5pv310/localtimer.c | 25 --- arch/arm/mach-s5pv310/time.c | 283 ------------------------- 6 files changed, 378 insertions(+), 378 deletions(-) create mode 100644 arch/arm/mach-exynos4/include/mach/pwm-clock.h create mode 100644 arch/arm/mach-exynos4/localtimer.c create mode 100644 arch/arm/mach-exynos4/time.c delete mode 100644 arch/arm/mach-s5pv310/include/mach/pwm-clock.h delete mode 100644 arch/arm/mach-s5pv310/localtimer.c delete mode 100644 arch/arm/mach-s5pv310/time.c (limited to 'arch') diff --git a/arch/arm/mach-exynos4/include/mach/pwm-clock.h b/arch/arm/mach-exynos4/include/mach/pwm-clock.h new file mode 100644 index 00000000000..8e12090287b --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/pwm-clock.h @@ -0,0 +1,70 @@ +/* linux/arch/arm/mach-exynos4/include/mach/pwm-clock.h + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks + * http://armlinux.simtec.co.uk/ + * + * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h + * + * EXYNOS4 - pwm clock and timer support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_PWMCLK_H +#define __ASM_ARCH_PWMCLK_H __FILE__ + +/** + * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk + * @tcfg: The timer TCFG1 register bits shifted down to 0. + * + * Return true if the given configuration from TCFG1 is a TCLK instead + * any of the TDIV clocks. + */ +static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) +{ + return tcfg == S3C64XX_TCFG1_MUX_TCLK; +} + +/** + * tcfg_to_divisor() - convert tcfg1 setting to a divisor + * @tcfg1: The tcfg1 setting, shifted down. + * + * Get the divisor value for the given tcfg1 setting. We assume the + * caller has already checked to see if this is not a TCLK source. + */ +static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) +{ + return 1 << tcfg1; +} + +/** + * pwm_tdiv_has_div1() - does the tdiv setting have a /1 + * + * Return true if we have a /1 in the tdiv setting. + */ +static inline unsigned int pwm_tdiv_has_div1(void) +{ + return 1; +} + +/** + * pwm_tdiv_div_bits() - calculate TCFG1 divisor value. + * @div: The divisor to calculate the bit information for. + * + * Turn a divisor into the necessary bit field for TCFG1. + */ +static inline unsigned long pwm_tdiv_div_bits(unsigned int div) +{ + return ilog2(div); +} + +#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK + +#endif /* __ASM_ARCH_PWMCLK_H */ diff --git a/arch/arm/mach-exynos4/localtimer.c b/arch/arm/mach-exynos4/localtimer.c new file mode 100644 index 00000000000..2a2993ae8d8 --- /dev/null +++ b/arch/arm/mach-exynos4/localtimer.c @@ -0,0 +1,25 @@ +/* linux/arch/arm/mach-exynos4/localtimer.c + * + * Cloned from linux/arch/arm/mach-realview/localtimer.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include + +#include +#include + +/* + * Setup the local clock events for a CPU. + */ +void __cpuinit local_timer_setup(struct clock_event_device *evt) +{ + evt->irq = IRQ_LOCALTIMER; + twd_timer_setup(evt); +} diff --git a/arch/arm/mach-exynos4/time.c b/arch/arm/mach-exynos4/time.c new file mode 100644 index 00000000000..e30ac704309 --- /dev/null +++ b/arch/arm/mach-exynos4/time.c @@ -0,0 +1,283 @@ +/* linux/arch/arm/mach-exynos4/time.c + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4 (and compatible) HRT support + * PWM 2/4 is used for this feature + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include + +static unsigned long clock_count_per_tick; + +static struct clk *tin2; +static struct clk *tin4; +static struct clk *tdiv2; +static struct clk *tdiv4; +static struct clk *timerclk; + +static void exynos4_pwm_stop(unsigned int pwm_id) +{ + unsigned long tcon; + + tcon = __raw_readl(S3C2410_TCON); + + switch (pwm_id) { + case 2: + tcon &= ~S3C2410_TCON_T2START; + break; + case 4: + tcon &= ~S3C2410_TCON_T4START; + break; + default: + break; + } + __raw_writel(tcon, S3C2410_TCON); +} + +static void exynos4_pwm_init(unsigned int pwm_id, unsigned long tcnt) +{ + unsigned long tcon; + + tcon = __raw_readl(S3C2410_TCON); + + /* timers reload after counting zero, so reduce the count by 1 */ + tcnt--; + + /* ensure timer is stopped... */ + switch (pwm_id) { + case 2: + tcon &= ~(0xf<<12); + tcon |= S3C2410_TCON_T2MANUALUPD; + + __raw_writel(tcnt, S3C2410_TCNTB(2)); + __raw_writel(tcnt, S3C2410_TCMPB(2)); + __raw_writel(tcon, S3C2410_TCON); + + break; + case 4: + tcon &= ~(7<<20); + tcon |= S3C2410_TCON_T4MANUALUPD; + + __raw_writel(tcnt, S3C2410_TCNTB(4)); + __raw_writel(tcnt, S3C2410_TCMPB(4)); + __raw_writel(tcon, S3C2410_TCON); + + break; + default: + break; + } +} + +static inline void exynos4_pwm_start(unsigned int pwm_id, bool periodic) +{ + unsigned long tcon; + + tcon = __raw_readl(S3C2410_TCON); + + switch (pwm_id) { + case 2: + tcon |= S3C2410_TCON_T2START; + tcon &= ~S3C2410_TCON_T2MANUALUPD; + + if (periodic) + tcon |= S3C2410_TCON_T2RELOAD; + else + tcon &= ~S3C2410_TCON_T2RELOAD; + break; + case 4: + tcon |= S3C2410_TCON_T4START; + tcon &= ~S3C2410_TCON_T4MANUALUPD; + + if (periodic) + tcon |= S3C2410_TCON_T4RELOAD; + else + tcon &= ~S3C2410_TCON_T4RELOAD; + break; + default: + break; + } + __raw_writel(tcon, S3C2410_TCON); +} + +static int exynos4_pwm_set_next_event(unsigned long cycles, + struct clock_event_device *evt) +{ + exynos4_pwm_init(2, cycles); + exynos4_pwm_start(2, 0); + return 0; +} + +static void exynos4_pwm_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + exynos4_pwm_stop(2); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + exynos4_pwm_init(2, clock_count_per_tick); + exynos4_pwm_start(2, 1); + break; + case CLOCK_EVT_MODE_ONESHOT: + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_RESUME: + break; + } +} + +static struct clock_event_device pwm_event_device = { + .name = "pwm_timer2", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .rating = 200, + .shift = 32, + .set_next_event = exynos4_pwm_set_next_event, + .set_mode = exynos4_pwm_set_mode, +}; + +irqreturn_t exynos4_clock_event_isr(int irq, void *dev_id) +{ + struct clock_event_device *evt = &pwm_event_device; + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct irqaction exynos4_clock_event_irq = { + .name = "pwm_timer2_irq", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = exynos4_clock_event_isr, +}; + +static void __init exynos4_clockevent_init(void) +{ + unsigned long pclk; + unsigned long clock_rate; + struct clk *tscaler; + + pclk = clk_get_rate(timerclk); + + /* configure clock tick */ + + tscaler = clk_get_parent(tdiv2); + + clk_set_rate(tscaler, pclk / 2); + clk_set_rate(tdiv2, pclk / 2); + clk_set_parent(tin2, tdiv2); + + clock_rate = clk_get_rate(tin2); + + clock_count_per_tick = clock_rate / HZ; + + pwm_event_device.mult = + div_sc(clock_rate, NSEC_PER_SEC, pwm_event_device.shift); + pwm_event_device.max_delta_ns = + clockevent_delta2ns(-1, &pwm_event_device); + pwm_event_device.min_delta_ns = + clockevent_delta2ns(1, &pwm_event_device); + + pwm_event_device.cpumask = cpumask_of(0); + clockevents_register_device(&pwm_event_device); + + setup_irq(IRQ_TIMER2, &exynos4_clock_event_irq); +} + +static cycle_t exynos4_pwm4_read(struct clocksource *cs) +{ + return (cycle_t) ~__raw_readl(S3C_TIMERREG(0x40)); +} + +struct clocksource pwm_clocksource = { + .name = "pwm_timer4", + .rating = 250, + .read = exynos4_pwm4_read, + .mask = CLOCKSOURCE_MASK(32), + .flags = CLOCK_SOURCE_IS_CONTINUOUS , +}; + +static void __init exynos4_clocksource_init(void) +{ + unsigned long pclk; + unsigned long clock_rate; + + pclk = clk_get_rate(timerclk); + + clk_set_rate(tdiv4, pclk / 2); + clk_set_parent(tin4, tdiv4); + + clock_rate = clk_get_rate(tin4); + + exynos4_pwm_init(4, ~0); + exynos4_pwm_start(4, 1); + + if (clocksource_register_hz(&pwm_clocksource, clock_rate)) + panic("%s: can't register clocksource\n", pwm_clocksource.name); +} + +static void __init exynos4_timer_resources(void) +{ + struct platform_device tmpdev; + + tmpdev.dev.bus = &platform_bus_type; + + timerclk = clk_get(NULL, "timers"); + if (IS_ERR(timerclk)) + panic("failed to get timers clock for system timer"); + + clk_enable(timerclk); + + tmpdev.id = 2; + tin2 = clk_get(&tmpdev.dev, "pwm-tin"); + if (IS_ERR(tin2)) + panic("failed to get pwm-tin2 clock for system timer"); + + tdiv2 = clk_get(&tmpdev.dev, "pwm-tdiv"); + if (IS_ERR(tdiv2)) + panic("failed to get pwm-tdiv2 clock for system timer"); + clk_enable(tin2); + + tmpdev.id = 4; + tin4 = clk_get(&tmpdev.dev, "pwm-tin"); + if (IS_ERR(tin4)) + panic("failed to get pwm-tin4 clock for system timer"); + + tdiv4 = clk_get(&tmpdev.dev, "pwm-tdiv"); + if (IS_ERR(tdiv4)) + panic("failed to get pwm-tdiv4 clock for system timer"); + + clk_enable(tin4); +} + +static void __init exynos4_timer_init(void) +{ +#ifdef CONFIG_LOCAL_TIMERS + twd_base = S5P_VA_TWD; +#endif + + exynos4_timer_resources(); + exynos4_clockevent_init(); + exynos4_clocksource_init(); +} + +struct sys_timer exynos4_timer = { + .init = exynos4_timer_init, +}; diff --git a/arch/arm/mach-s5pv310/include/mach/pwm-clock.h b/arch/arm/mach-s5pv310/include/mach/pwm-clock.h deleted file mode 100644 index 7e6da270108..00000000000 --- a/arch/arm/mach-s5pv310/include/mach/pwm-clock.h +++ /dev/null @@ -1,70 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/pwm-clock.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h - * - * S5PV310 - pwm clock and timer support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_PWMCLK_H -#define __ASM_ARCH_PWMCLK_H __FILE__ - -/** - * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk - * @tcfg: The timer TCFG1 register bits shifted down to 0. - * - * Return true if the given configuration from TCFG1 is a TCLK instead - * any of the TDIV clocks. - */ -static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) -{ - return tcfg == S3C64XX_TCFG1_MUX_TCLK; -} - -/** - * tcfg_to_divisor() - convert tcfg1 setting to a divisor - * @tcfg1: The tcfg1 setting, shifted down. - * - * Get the divisor value for the given tcfg1 setting. We assume the - * caller has already checked to see if this is not a TCLK source. - */ -static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) -{ - return 1 << tcfg1; -} - -/** - * pwm_tdiv_has_div1() - does the tdiv setting have a /1 - * - * Return true if we have a /1 in the tdiv setting. - */ -static inline unsigned int pwm_tdiv_has_div1(void) -{ - return 1; -} - -/** - * pwm_tdiv_div_bits() - calculate TCFG1 divisor value. - * @div: The divisor to calculate the bit information for. - * - * Turn a divisor into the necessary bit field for TCFG1. - */ -static inline unsigned long pwm_tdiv_div_bits(unsigned int div) -{ - return ilog2(div); -} - -#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK - -#endif /* __ASM_ARCH_PWMCLK_H */ diff --git a/arch/arm/mach-s5pv310/localtimer.c b/arch/arm/mach-s5pv310/localtimer.c deleted file mode 100644 index 2784036cd8b..00000000000 --- a/arch/arm/mach-s5pv310/localtimer.c +++ /dev/null @@ -1,25 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/localtimer.c - * - * Cloned from linux/arch/arm/mach-realview/localtimer.c - * - * Copyright (C) 2002 ARM Ltd. - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include - -#include -#include - -/* - * Setup the local clock events for a CPU. - */ -void __cpuinit local_timer_setup(struct clock_event_device *evt) -{ - evt->irq = IRQ_LOCALTIMER; - twd_timer_setup(evt); -} diff --git a/arch/arm/mach-s5pv310/time.c b/arch/arm/mach-s5pv310/time.c deleted file mode 100644 index b262d461533..00000000000 --- a/arch/arm/mach-s5pv310/time.c +++ /dev/null @@ -1,283 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/time.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5PV310 (and compatible) HRT support - * PWM 2/4 is used for this feature - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include -#include -#include - -#include - -#include -#include -#include - -static unsigned long clock_count_per_tick; - -static struct clk *tin2; -static struct clk *tin4; -static struct clk *tdiv2; -static struct clk *tdiv4; -static struct clk *timerclk; - -static void s5pv310_pwm_stop(unsigned int pwm_id) -{ - unsigned long tcon; - - tcon = __raw_readl(S3C2410_TCON); - - switch (pwm_id) { - case 2: - tcon &= ~S3C2410_TCON_T2START; - break; - case 4: - tcon &= ~S3C2410_TCON_T4START; - break; - default: - break; - } - __raw_writel(tcon, S3C2410_TCON); -} - -static void s5pv310_pwm_init(unsigned int pwm_id, unsigned long tcnt) -{ - unsigned long tcon; - - tcon = __raw_readl(S3C2410_TCON); - - /* timers reload after counting zero, so reduce the count by 1 */ - tcnt--; - - /* ensure timer is stopped... */ - switch (pwm_id) { - case 2: - tcon &= ~(0xf<<12); - tcon |= S3C2410_TCON_T2MANUALUPD; - - __raw_writel(tcnt, S3C2410_TCNTB(2)); - __raw_writel(tcnt, S3C2410_TCMPB(2)); - __raw_writel(tcon, S3C2410_TCON); - - break; - case 4: - tcon &= ~(7<<20); - tcon |= S3C2410_TCON_T4MANUALUPD; - - __raw_writel(tcnt, S3C2410_TCNTB(4)); - __raw_writel(tcnt, S3C2410_TCMPB(4)); - __raw_writel(tcon, S3C2410_TCON); - - break; - default: - break; - } -} - -static inline void s5pv310_pwm_start(unsigned int pwm_id, bool periodic) -{ - unsigned long tcon; - - tcon = __raw_readl(S3C2410_TCON); - - switch (pwm_id) { - case 2: - tcon |= S3C2410_TCON_T2START; - tcon &= ~S3C2410_TCON_T2MANUALUPD; - - if (periodic) - tcon |= S3C2410_TCON_T2RELOAD; - else - tcon &= ~S3C2410_TCON_T2RELOAD; - break; - case 4: - tcon |= S3C2410_TCON_T4START; - tcon &= ~S3C2410_TCON_T4MANUALUPD; - - if (periodic) - tcon |= S3C2410_TCON_T4RELOAD; - else - tcon &= ~S3C2410_TCON_T4RELOAD; - break; - default: - break; - } - __raw_writel(tcon, S3C2410_TCON); -} - -static int s5pv310_pwm_set_next_event(unsigned long cycles, - struct clock_event_device *evt) -{ - s5pv310_pwm_init(2, cycles); - s5pv310_pwm_start(2, 0); - return 0; -} - -static void s5pv310_pwm_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - s5pv310_pwm_stop(2); - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - s5pv310_pwm_init(2, clock_count_per_tick); - s5pv310_pwm_start(2, 1); - break; - case CLOCK_EVT_MODE_ONESHOT: - break; - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_RESUME: - break; - } -} - -static struct clock_event_device pwm_event_device = { - .name = "pwm_timer2", - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .rating = 200, - .shift = 32, - .set_next_event = s5pv310_pwm_set_next_event, - .set_mode = s5pv310_pwm_set_mode, -}; - -irqreturn_t s5pv310_clock_event_isr(int irq, void *dev_id) -{ - struct clock_event_device *evt = &pwm_event_device; - - evt->event_handler(evt); - - return IRQ_HANDLED; -} - -static struct irqaction s5pv310_clock_event_irq = { - .name = "pwm_timer2_irq", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = s5pv310_clock_event_isr, -}; - -static void __init s5pv310_clockevent_init(void) -{ - unsigned long pclk; - unsigned long clock_rate; - struct clk *tscaler; - - pclk = clk_get_rate(timerclk); - - /* configure clock tick */ - - tscaler = clk_get_parent(tdiv2); - - clk_set_rate(tscaler, pclk / 2); - clk_set_rate(tdiv2, pclk / 2); - clk_set_parent(tin2, tdiv2); - - clock_rate = clk_get_rate(tin2); - - clock_count_per_tick = clock_rate / HZ; - - pwm_event_device.mult = - div_sc(clock_rate, NSEC_PER_SEC, pwm_event_device.shift); - pwm_event_device.max_delta_ns = - clockevent_delta2ns(-1, &pwm_event_device); - pwm_event_device.min_delta_ns = - clockevent_delta2ns(1, &pwm_event_device); - - pwm_event_device.cpumask = cpumask_of(0); - clockevents_register_device(&pwm_event_device); - - setup_irq(IRQ_TIMER2, &s5pv310_clock_event_irq); -} - -static cycle_t s5pv310_pwm4_read(struct clocksource *cs) -{ - return (cycle_t) ~__raw_readl(S3C_TIMERREG(0x40)); -} - -struct clocksource pwm_clocksource = { - .name = "pwm_timer4", - .rating = 250, - .read = s5pv310_pwm4_read, - .mask = CLOCKSOURCE_MASK(32), - .flags = CLOCK_SOURCE_IS_CONTINUOUS , -}; - -static void __init s5pv310_clocksource_init(void) -{ - unsigned long pclk; - unsigned long clock_rate; - - pclk = clk_get_rate(timerclk); - - clk_set_rate(tdiv4, pclk / 2); - clk_set_parent(tin4, tdiv4); - - clock_rate = clk_get_rate(tin4); - - s5pv310_pwm_init(4, ~0); - s5pv310_pwm_start(4, 1); - - if (clocksource_register_hz(&pwm_clocksource, clock_rate)) - panic("%s: can't register clocksource\n", pwm_clocksource.name); -} - -static void __init s5pv310_timer_resources(void) -{ - struct platform_device tmpdev; - - tmpdev.dev.bus = &platform_bus_type; - - timerclk = clk_get(NULL, "timers"); - if (IS_ERR(timerclk)) - panic("failed to get timers clock for system timer"); - - clk_enable(timerclk); - - tmpdev.id = 2; - tin2 = clk_get(&tmpdev.dev, "pwm-tin"); - if (IS_ERR(tin2)) - panic("failed to get pwm-tin2 clock for system timer"); - - tdiv2 = clk_get(&tmpdev.dev, "pwm-tdiv"); - if (IS_ERR(tdiv2)) - panic("failed to get pwm-tdiv2 clock for system timer"); - clk_enable(tin2); - - tmpdev.id = 4; - tin4 = clk_get(&tmpdev.dev, "pwm-tin"); - if (IS_ERR(tin4)) - panic("failed to get pwm-tin4 clock for system timer"); - - tdiv4 = clk_get(&tmpdev.dev, "pwm-tdiv"); - if (IS_ERR(tdiv4)) - panic("failed to get pwm-tdiv4 clock for system timer"); - - clk_enable(tin4); -} - -static void __init s5pv310_timer_init(void) -{ -#ifdef CONFIG_LOCAL_TIMERS - twd_base = S5P_VA_TWD; -#endif - - s5pv310_timer_resources(); - s5pv310_clockevent_init(); - s5pv310_clocksource_init(); -} - -struct sys_timer s5pv310_timer = { - .init = s5pv310_timer_init, -}; -- cgit v1.2.3-18-g5258 From 3db3ae5eb94eb8579991174fe66999261b66018d Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Mon, 14 Feb 2011 16:22:36 +0900 Subject: ARM: EXYNOS4: Update device support This patch updates device support of EXYNOS4 according to the change of ARCH name, EXYNOS4. Cc: Ben Dooks Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos4/dev-audio.c | 367 +++++++++++++++++++++++++++++ arch/arm/mach-exynos4/dev-pd.c | 139 +++++++++++ arch/arm/mach-exynos4/dev-sysmmu.c | 189 +++++++++++++++ arch/arm/mach-exynos4/setup-i2c1.c | 23 ++ arch/arm/mach-exynos4/setup-i2c2.c | 23 ++ arch/arm/mach-exynos4/setup-i2c3.c | 23 ++ arch/arm/mach-exynos4/setup-i2c4.c | 23 ++ arch/arm/mach-exynos4/setup-i2c5.c | 23 ++ arch/arm/mach-exynos4/setup-i2c6.c | 23 ++ arch/arm/mach-exynos4/setup-i2c7.c | 23 ++ arch/arm/mach-exynos4/setup-sdhci-gpio.c | 152 ++++++++++++ arch/arm/mach-exynos4/setup-sdhci.c | 69 ++++++ arch/arm/mach-s5pv310/dev-audio.c | 364 ---------------------------- arch/arm/mach-s5pv310/dev-pd.c | 139 ----------- arch/arm/mach-s5pv310/dev-sysmmu.c | 187 --------------- arch/arm/mach-s5pv310/setup-i2c1.c | 23 -- arch/arm/mach-s5pv310/setup-i2c2.c | 23 -- arch/arm/mach-s5pv310/setup-i2c3.c | 23 -- arch/arm/mach-s5pv310/setup-i2c4.c | 23 -- arch/arm/mach-s5pv310/setup-i2c5.c | 23 -- arch/arm/mach-s5pv310/setup-i2c6.c | 23 -- arch/arm/mach-s5pv310/setup-i2c7.c | 23 -- arch/arm/mach-s5pv310/setup-sdhci-gpio.c | 152 ------------ arch/arm/mach-s5pv310/setup-sdhci.c | 69 ------ arch/arm/plat-samsung/include/plat/devs.h | 23 +- arch/arm/plat-samsung/include/plat/pd.h | 4 +- arch/arm/plat-samsung/include/plat/sdhci.h | 63 ++--- 27 files changed, 1125 insertions(+), 1114 deletions(-) create mode 100644 arch/arm/mach-exynos4/dev-audio.c create mode 100644 arch/arm/mach-exynos4/dev-pd.c create mode 100644 arch/arm/mach-exynos4/dev-sysmmu.c create mode 100644 arch/arm/mach-exynos4/setup-i2c1.c create mode 100644 arch/arm/mach-exynos4/setup-i2c2.c create mode 100644 arch/arm/mach-exynos4/setup-i2c3.c create mode 100644 arch/arm/mach-exynos4/setup-i2c4.c create mode 100644 arch/arm/mach-exynos4/setup-i2c5.c create mode 100644 arch/arm/mach-exynos4/setup-i2c6.c create mode 100644 arch/arm/mach-exynos4/setup-i2c7.c create mode 100644 arch/arm/mach-exynos4/setup-sdhci-gpio.c create mode 100644 arch/arm/mach-exynos4/setup-sdhci.c delete mode 100644 arch/arm/mach-s5pv310/dev-audio.c delete mode 100644 arch/arm/mach-s5pv310/dev-pd.c delete mode 100644 arch/arm/mach-s5pv310/dev-sysmmu.c delete mode 100644 arch/arm/mach-s5pv310/setup-i2c1.c delete mode 100644 arch/arm/mach-s5pv310/setup-i2c2.c delete mode 100644 arch/arm/mach-s5pv310/setup-i2c3.c delete mode 100644 arch/arm/mach-s5pv310/setup-i2c4.c delete mode 100644 arch/arm/mach-s5pv310/setup-i2c5.c delete mode 100644 arch/arm/mach-s5pv310/setup-i2c6.c delete mode 100644 arch/arm/mach-s5pv310/setup-i2c7.c delete mode 100644 arch/arm/mach-s5pv310/setup-sdhci-gpio.c delete mode 100644 arch/arm/mach-s5pv310/setup-sdhci.c (limited to 'arch') diff --git a/arch/arm/mach-exynos4/dev-audio.c b/arch/arm/mach-exynos4/dev-audio.c new file mode 100644 index 00000000000..1eed5f9f7bd --- /dev/null +++ b/arch/arm/mach-exynos4/dev-audio.c @@ -0,0 +1,367 @@ +/* linux/arch/arm/mach-exynos4/dev-audio.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Copyright (c) 2010 Samsung Electronics Co. Ltd + * Jaswinder Singh + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include + +#include +#include + +#include +#include +#include + +static const char *rclksrc[] = { + [0] = "busclk", + [1] = "i2sclk", +}; + +static int exynos4_cfg_i2s(struct platform_device *pdev) +{ + /* configure GPIO for i2s port */ + switch (pdev->id) { + case 0: + s3c_gpio_cfgpin_range(EXYNOS4_GPZ(0), 7, S3C_GPIO_SFN(2)); + break; + case 1: + s3c_gpio_cfgpin_range(EXYNOS4_GPC0(0), 5, S3C_GPIO_SFN(2)); + break; + case 2: + s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 5, S3C_GPIO_SFN(4)); + break; + default: + printk(KERN_ERR "Invalid Device %d\n", pdev->id); + return -EINVAL; + } + + return 0; +} + +static struct s3c_audio_pdata i2sv5_pdata = { + .cfg_gpio = exynos4_cfg_i2s, + .type = { + .i2s = { + .quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI + | QUIRK_NEED_RSTCLR, + .src_clk = rclksrc, + }, + }, +}; + +static struct resource exynos4_i2s0_resource[] = { + [0] = { + .start = EXYNOS4_PA_I2S0, + .end = EXYNOS4_PA_I2S0 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_I2S0_TX, + .end = DMACH_I2S0_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_I2S0_RX, + .end = DMACH_I2S0_RX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = DMACH_I2S0S_TX, + .end = DMACH_I2S0S_TX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device exynos4_device_i2s0 = { + .name = "samsung-i2s", + .id = 0, + .num_resources = ARRAY_SIZE(exynos4_i2s0_resource), + .resource = exynos4_i2s0_resource, + .dev = { + .platform_data = &i2sv5_pdata, + }, +}; + +static const char *rclksrc_v3[] = { + [0] = "sclk_i2s", + [1] = "no_such_clock", +}; + +static struct s3c_audio_pdata i2sv3_pdata = { + .cfg_gpio = exynos4_cfg_i2s, + .type = { + .i2s = { + .quirks = QUIRK_NO_MUXPSR, + .src_clk = rclksrc_v3, + }, + }, +}; + +static struct resource exynos4_i2s1_resource[] = { + [0] = { + .start = EXYNOS4_PA_I2S1, + .end = EXYNOS4_PA_I2S1 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_I2S1_TX, + .end = DMACH_I2S1_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_I2S1_RX, + .end = DMACH_I2S1_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device exynos4_device_i2s1 = { + .name = "samsung-i2s", + .id = 1, + .num_resources = ARRAY_SIZE(exynos4_i2s1_resource), + .resource = exynos4_i2s1_resource, + .dev = { + .platform_data = &i2sv3_pdata, + }, +}; + +static struct resource exynos4_i2s2_resource[] = { + [0] = { + .start = EXYNOS4_PA_I2S2, + .end = EXYNOS4_PA_I2S2 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_I2S2_TX, + .end = DMACH_I2S2_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_I2S2_RX, + .end = DMACH_I2S2_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device exynos4_device_i2s2 = { + .name = "samsung-i2s", + .id = 2, + .num_resources = ARRAY_SIZE(exynos4_i2s2_resource), + .resource = exynos4_i2s2_resource, + .dev = { + .platform_data = &i2sv3_pdata, + }, +}; + +/* PCM Controller platform_devices */ + +static int exynos4_pcm_cfg_gpio(struct platform_device *pdev) +{ + switch (pdev->id) { + case 0: + s3c_gpio_cfgpin_range(EXYNOS4_GPZ(0), 5, S3C_GPIO_SFN(3)); + break; + case 1: + s3c_gpio_cfgpin_range(EXYNOS4_GPC0(0), 5, S3C_GPIO_SFN(3)); + break; + case 2: + s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 5, S3C_GPIO_SFN(3)); + break; + default: + printk(KERN_DEBUG "Invalid PCM Controller number!"); + return -EINVAL; + } + + return 0; +} + +static struct s3c_audio_pdata s3c_pcm_pdata = { + .cfg_gpio = exynos4_pcm_cfg_gpio, +}; + +static struct resource exynos4_pcm0_resource[] = { + [0] = { + .start = EXYNOS4_PA_PCM0, + .end = EXYNOS4_PA_PCM0 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_PCM0_TX, + .end = DMACH_PCM0_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_PCM0_RX, + .end = DMACH_PCM0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device exynos4_device_pcm0 = { + .name = "samsung-pcm", + .id = 0, + .num_resources = ARRAY_SIZE(exynos4_pcm0_resource), + .resource = exynos4_pcm0_resource, + .dev = { + .platform_data = &s3c_pcm_pdata, + }, +}; + +static struct resource exynos4_pcm1_resource[] = { + [0] = { + .start = EXYNOS4_PA_PCM1, + .end = EXYNOS4_PA_PCM1 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_PCM1_TX, + .end = DMACH_PCM1_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_PCM1_RX, + .end = DMACH_PCM1_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device exynos4_device_pcm1 = { + .name = "samsung-pcm", + .id = 1, + .num_resources = ARRAY_SIZE(exynos4_pcm1_resource), + .resource = exynos4_pcm1_resource, + .dev = { + .platform_data = &s3c_pcm_pdata, + }, +}; + +static struct resource exynos4_pcm2_resource[] = { + [0] = { + .start = EXYNOS4_PA_PCM2, + .end = EXYNOS4_PA_PCM2 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_PCM2_TX, + .end = DMACH_PCM2_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_PCM2_RX, + .end = DMACH_PCM2_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device exynos4_device_pcm2 = { + .name = "samsung-pcm", + .id = 2, + .num_resources = ARRAY_SIZE(exynos4_pcm2_resource), + .resource = exynos4_pcm2_resource, + .dev = { + .platform_data = &s3c_pcm_pdata, + }, +}; + +/* AC97 Controller platform devices */ + +static int exynos4_ac97_cfg_gpio(struct platform_device *pdev) +{ + return s3c_gpio_cfgpin_range(EXYNOS4_GPC0(0), 5, S3C_GPIO_SFN(4)); +} + +static struct resource exynos4_ac97_resource[] = { + [0] = { + .start = EXYNOS4_PA_AC97, + .end = EXYNOS4_PA_AC97 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_AC97_PCMOUT, + .end = DMACH_AC97_PCMOUT, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_AC97_PCMIN, + .end = DMACH_AC97_PCMIN, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = DMACH_AC97_MICIN, + .end = DMACH_AC97_MICIN, + .flags = IORESOURCE_DMA, + }, + [4] = { + .start = IRQ_AC97, + .end = IRQ_AC97, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct s3c_audio_pdata s3c_ac97_pdata = { + .cfg_gpio = exynos4_ac97_cfg_gpio, +}; + +static u64 exynos4_ac97_dmamask = DMA_BIT_MASK(32); + +struct platform_device exynos4_device_ac97 = { + .name = "samsung-ac97", + .id = -1, + .num_resources = ARRAY_SIZE(exynos4_ac97_resource), + .resource = exynos4_ac97_resource, + .dev = { + .platform_data = &s3c_ac97_pdata, + .dma_mask = &exynos4_ac97_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +/* S/PDIF Controller platform_device */ + +static int exynos4_spdif_cfg_gpio(struct platform_device *pdev) +{ + s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 2, S3C_GPIO_SFN(3)); + + return 0; +} + +static struct resource exynos4_spdif_resource[] = { + [0] = { + .start = EXYNOS4_PA_SPDIF, + .end = EXYNOS4_PA_SPDIF + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_SPDIF, + .end = DMACH_SPDIF, + .flags = IORESOURCE_DMA, + }, +}; + +static struct s3c_audio_pdata samsung_spdif_pdata = { + .cfg_gpio = exynos4_spdif_cfg_gpio, +}; + +static u64 exynos4_spdif_dmamask = DMA_BIT_MASK(32); + +struct platform_device exynos4_device_spdif = { + .name = "samsung-spdif", + .id = -1, + .num_resources = ARRAY_SIZE(exynos4_spdif_resource), + .resource = exynos4_spdif_resource, + .dev = { + .platform_data = &samsung_spdif_pdata, + .dma_mask = &exynos4_spdif_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; diff --git a/arch/arm/mach-exynos4/dev-pd.c b/arch/arm/mach-exynos4/dev-pd.c new file mode 100644 index 00000000000..3273f25d6a7 --- /dev/null +++ b/arch/arm/mach-exynos4/dev-pd.c @@ -0,0 +1,139 @@ +/* linux/arch/arm/mach-exynos4/dev-pd.c + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4 - Power Domain support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include + +#include + +#include + +static int exynos4_pd_enable(struct device *dev) +{ + struct samsung_pd_info *pdata = dev->platform_data; + u32 timeout; + + __raw_writel(S5P_INT_LOCAL_PWR_EN, pdata->base); + + /* Wait max 1ms */ + timeout = 10; + while ((__raw_readl(pdata->base + 0x4) & S5P_INT_LOCAL_PWR_EN) + != S5P_INT_LOCAL_PWR_EN) { + if (timeout == 0) { + printk(KERN_ERR "Power domain %s enable failed.\n", + dev_name(dev)); + return -ETIMEDOUT; + } + timeout--; + udelay(100); + } + + return 0; +} + +static int exynos4_pd_disable(struct device *dev) +{ + struct samsung_pd_info *pdata = dev->platform_data; + u32 timeout; + + __raw_writel(0, pdata->base); + + /* Wait max 1ms */ + timeout = 10; + while (__raw_readl(pdata->base + 0x4) & S5P_INT_LOCAL_PWR_EN) { + if (timeout == 0) { + printk(KERN_ERR "Power domain %s disable failed.\n", + dev_name(dev)); + return -ETIMEDOUT; + } + timeout--; + udelay(100); + } + + return 0; +} + +struct platform_device exynos4_device_pd[] = { + { + .name = "samsung-pd", + .id = 0, + .dev = { + .platform_data = &(struct samsung_pd_info) { + .enable = exynos4_pd_enable, + .disable = exynos4_pd_disable, + .base = S5P_PMU_MFC_CONF, + }, + }, + }, { + .name = "samsung-pd", + .id = 1, + .dev = { + .platform_data = &(struct samsung_pd_info) { + .enable = exynos4_pd_enable, + .disable = exynos4_pd_disable, + .base = S5P_PMU_G3D_CONF, + }, + }, + }, { + .name = "samsung-pd", + .id = 2, + .dev = { + .platform_data = &(struct samsung_pd_info) { + .enable = exynos4_pd_enable, + .disable = exynos4_pd_disable, + .base = S5P_PMU_LCD0_CONF, + }, + }, + }, { + .name = "samsung-pd", + .id = 3, + .dev = { + .platform_data = &(struct samsung_pd_info) { + .enable = exynos4_pd_enable, + .disable = exynos4_pd_disable, + .base = S5P_PMU_LCD1_CONF, + }, + }, + }, { + .name = "samsung-pd", + .id = 4, + .dev = { + .platform_data = &(struct samsung_pd_info) { + .enable = exynos4_pd_enable, + .disable = exynos4_pd_disable, + .base = S5P_PMU_TV_CONF, + }, + }, + }, { + .name = "samsung-pd", + .id = 5, + .dev = { + .platform_data = &(struct samsung_pd_info) { + .enable = exynos4_pd_enable, + .disable = exynos4_pd_disable, + .base = S5P_PMU_CAM_CONF, + }, + }, + }, { + .name = "samsung-pd", + .id = 6, + .dev = { + .platform_data = &(struct samsung_pd_info) { + .enable = exynos4_pd_enable, + .disable = exynos4_pd_disable, + .base = S5P_PMU_GPS_CONF, + }, + }, + }, +}; diff --git a/arch/arm/mach-exynos4/dev-sysmmu.c b/arch/arm/mach-exynos4/dev-sysmmu.c new file mode 100644 index 00000000000..a10790a614e --- /dev/null +++ b/arch/arm/mach-exynos4/dev-sysmmu.c @@ -0,0 +1,189 @@ +/* linux/arch/arm/mach-exynos4/dev-sysmmu.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4 - System MMU support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + +#include +#include + +static struct resource exynos4_sysmmu_resource[] = { + [0] = { + .start = EXYNOS4_PA_SYSMMU_MDMA, + .end = EXYNOS4_PA_SYSMMU_MDMA + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_SYSMMU_MDMA0_0, + .end = IRQ_SYSMMU_MDMA0_0, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = EXYNOS4_PA_SYSMMU_SSS, + .end = EXYNOS4_PA_SYSMMU_SSS + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [3] = { + .start = IRQ_SYSMMU_SSS_0, + .end = IRQ_SYSMMU_SSS_0, + .flags = IORESOURCE_IRQ, + }, + [4] = { + .start = EXYNOS4_PA_SYSMMU_FIMC0, + .end = EXYNOS4_PA_SYSMMU_FIMC0 + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [5] = { + .start = IRQ_SYSMMU_FIMC0_0, + .end = IRQ_SYSMMU_FIMC0_0, + .flags = IORESOURCE_IRQ, + }, + [6] = { + .start = EXYNOS4_PA_SYSMMU_FIMC1, + .end = EXYNOS4_PA_SYSMMU_FIMC1 + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [7] = { + .start = IRQ_SYSMMU_FIMC1_0, + .end = IRQ_SYSMMU_FIMC1_0, + .flags = IORESOURCE_IRQ, + }, + [8] = { + .start = EXYNOS4_PA_SYSMMU_FIMC2, + .end = EXYNOS4_PA_SYSMMU_FIMC2 + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [9] = { + .start = IRQ_SYSMMU_FIMC2_0, + .end = IRQ_SYSMMU_FIMC2_0, + .flags = IORESOURCE_IRQ, + }, + [10] = { + .start = EXYNOS4_PA_SYSMMU_FIMC3, + .end = EXYNOS4_PA_SYSMMU_FIMC3 + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [11] = { + .start = IRQ_SYSMMU_FIMC3_0, + .end = IRQ_SYSMMU_FIMC3_0, + .flags = IORESOURCE_IRQ, + }, + [12] = { + .start = EXYNOS4_PA_SYSMMU_JPEG, + .end = EXYNOS4_PA_SYSMMU_JPEG + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [13] = { + .start = IRQ_SYSMMU_JPEG_0, + .end = IRQ_SYSMMU_JPEG_0, + .flags = IORESOURCE_IRQ, + }, + [14] = { + .start = EXYNOS4_PA_SYSMMU_FIMD0, + .end = EXYNOS4_PA_SYSMMU_FIMD0 + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [15] = { + .start = IRQ_SYSMMU_LCD0_M0_0, + .end = IRQ_SYSMMU_LCD0_M0_0, + .flags = IORESOURCE_IRQ, + }, + [16] = { + .start = EXYNOS4_PA_SYSMMU_FIMD1, + .end = EXYNOS4_PA_SYSMMU_FIMD1 + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [17] = { + .start = IRQ_SYSMMU_LCD1_M1_0, + .end = IRQ_SYSMMU_LCD1_M1_0, + .flags = IORESOURCE_IRQ, + }, + [18] = { + .start = EXYNOS4_PA_SYSMMU_PCIe, + .end = EXYNOS4_PA_SYSMMU_PCIe + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [19] = { + .start = IRQ_SYSMMU_PCIE_0, + .end = IRQ_SYSMMU_PCIE_0, + .flags = IORESOURCE_IRQ, + }, + [20] = { + .start = EXYNOS4_PA_SYSMMU_G2D, + .end = EXYNOS4_PA_SYSMMU_G2D + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [21] = { + .start = IRQ_SYSMMU_2D_0, + .end = IRQ_SYSMMU_2D_0, + .flags = IORESOURCE_IRQ, + }, + [22] = { + .start = EXYNOS4_PA_SYSMMU_ROTATOR, + .end = EXYNOS4_PA_SYSMMU_ROTATOR + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [23] = { + .start = IRQ_SYSMMU_ROTATOR_0, + .end = IRQ_SYSMMU_ROTATOR_0, + .flags = IORESOURCE_IRQ, + }, + [24] = { + .start = EXYNOS4_PA_SYSMMU_MDMA2, + .end = EXYNOS4_PA_SYSMMU_MDMA2 + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [25] = { + .start = IRQ_SYSMMU_MDMA1_0, + .end = IRQ_SYSMMU_MDMA1_0, + .flags = IORESOURCE_IRQ, + }, + [26] = { + .start = EXYNOS4_PA_SYSMMU_TV, + .end = EXYNOS4_PA_SYSMMU_TV + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [27] = { + .start = IRQ_SYSMMU_TV_M0_0, + .end = IRQ_SYSMMU_TV_M0_0, + .flags = IORESOURCE_IRQ, + }, + [28] = { + .start = EXYNOS4_PA_SYSMMU_MFC_L, + .end = EXYNOS4_PA_SYSMMU_MFC_L + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [29] = { + .start = IRQ_SYSMMU_MFC_M0_0, + .end = IRQ_SYSMMU_MFC_M0_0, + .flags = IORESOURCE_IRQ, + }, + [30] = { + .start = EXYNOS4_PA_SYSMMU_MFC_R, + .end = EXYNOS4_PA_SYSMMU_MFC_R + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [31] = { + .start = IRQ_SYSMMU_MFC_M1_0, + .end = IRQ_SYSMMU_MFC_M1_0, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device exynos4_device_sysmmu = { + .name = "s5p-sysmmu", + .id = 32, + .num_resources = ARRAY_SIZE(exynos4_sysmmu_resource), + .resource = exynos4_sysmmu_resource, +}; + +EXPORT_SYMBOL(exynos4_device_sysmmu); diff --git a/arch/arm/mach-exynos4/setup-i2c1.c b/arch/arm/mach-exynos4/setup-i2c1.c new file mode 100644 index 00000000000..fd7235a43f6 --- /dev/null +++ b/arch/arm/mach-exynos4/setup-i2c1.c @@ -0,0 +1,23 @@ +/* + * linux/arch/arm/mach-exynos4/setup-i2c1.c + * + * Copyright (C) 2010 Samsung Electronics Co., Ltd. + * + * I2C1 GPIO configuration. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +struct platform_device; /* don't need the contents */ + +#include +#include +#include + +void s3c_i2c1_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgall_range(EXYNOS4_GPD1(2), 2, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); +} diff --git a/arch/arm/mach-exynos4/setup-i2c2.c b/arch/arm/mach-exynos4/setup-i2c2.c new file mode 100644 index 00000000000..2694b19e8b3 --- /dev/null +++ b/arch/arm/mach-exynos4/setup-i2c2.c @@ -0,0 +1,23 @@ +/* + * linux/arch/arm/mach-exynos4/setup-i2c2.c + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * + * I2C2 GPIO configuration. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +struct platform_device; /* don't need the contents */ + +#include +#include +#include + +void s3c_i2c2_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgall_range(EXYNOS4_GPA0(6), 2, + S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); +} diff --git a/arch/arm/mach-exynos4/setup-i2c3.c b/arch/arm/mach-exynos4/setup-i2c3.c new file mode 100644 index 00000000000..379bd306993 --- /dev/null +++ b/arch/arm/mach-exynos4/setup-i2c3.c @@ -0,0 +1,23 @@ +/* + * linux/arch/arm/mach-exynos4/setup-i2c3.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * + * I2C3 GPIO configuration. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +struct platform_device; /* don't need the contents */ + +#include +#include +#include + +void s3c_i2c3_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgall_range(EXYNOS4_GPA1(2), 2, + S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); +} diff --git a/arch/arm/mach-exynos4/setup-i2c4.c b/arch/arm/mach-exynos4/setup-i2c4.c new file mode 100644 index 00000000000..9f3c04855b7 --- /dev/null +++ b/arch/arm/mach-exynos4/setup-i2c4.c @@ -0,0 +1,23 @@ +/* + * linux/arch/arm/mach-exynos4/setup-i2c4.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * + * I2C4 GPIO configuration. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +struct platform_device; /* don't need the contents */ + +#include +#include +#include + +void s3c_i2c4_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgall_range(EXYNOS4_GPB(2), 2, + S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); +} diff --git a/arch/arm/mach-exynos4/setup-i2c5.c b/arch/arm/mach-exynos4/setup-i2c5.c new file mode 100644 index 00000000000..77e1a1e57c7 --- /dev/null +++ b/arch/arm/mach-exynos4/setup-i2c5.c @@ -0,0 +1,23 @@ +/* + * linux/arch/arm/mach-exynos4/setup-i2c5.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * + * I2C5 GPIO configuration. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +struct platform_device; /* don't need the contents */ + +#include +#include +#include + +void s3c_i2c5_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgall_range(EXYNOS4_GPB(6), 2, + S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); +} diff --git a/arch/arm/mach-exynos4/setup-i2c6.c b/arch/arm/mach-exynos4/setup-i2c6.c new file mode 100644 index 00000000000..284d12b7af0 --- /dev/null +++ b/arch/arm/mach-exynos4/setup-i2c6.c @@ -0,0 +1,23 @@ +/* + * linux/arch/arm/mach-exynos4/setup-i2c6.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * + * I2C6 GPIO configuration. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +struct platform_device; /* don't need the contents */ + +#include +#include +#include + +void s3c_i2c6_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgall_range(EXYNOS4_GPC1(3), 2, + S3C_GPIO_SFN(4), S3C_GPIO_PULL_UP); +} diff --git a/arch/arm/mach-exynos4/setup-i2c7.c b/arch/arm/mach-exynos4/setup-i2c7.c new file mode 100644 index 00000000000..b7611ee359a --- /dev/null +++ b/arch/arm/mach-exynos4/setup-i2c7.c @@ -0,0 +1,23 @@ +/* + * linux/arch/arm/mach-exynos4/setup-i2c7.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * + * I2C7 GPIO configuration. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +struct platform_device; /* don't need the contents */ + +#include +#include +#include + +void s3c_i2c7_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgall_range(EXYNOS4_GPD0(2), 2, + S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); +} diff --git a/arch/arm/mach-exynos4/setup-sdhci-gpio.c b/arch/arm/mach-exynos4/setup-sdhci-gpio.c new file mode 100644 index 00000000000..1b3d3a2de95 --- /dev/null +++ b/arch/arm/mach-exynos4/setup-sdhci-gpio.c @@ -0,0 +1,152 @@ +/* linux/arch/arm/mach-exynos4/setup-sdhci-gpio.c + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) +{ + struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; + unsigned int gpio; + + /* Set all the necessary GPK0[0:1] pins to special-function 2 */ + for (gpio = EXYNOS4_GPK0(0); gpio < EXYNOS4_GPK0(2); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } + + switch (width) { + case 8: + for (gpio = EXYNOS4_GPK1(3); gpio <= EXYNOS4_GPK1(6); gpio++) { + /* Data pin GPK1[3:6] to special-funtion 3 */ + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } + case 4: + for (gpio = EXYNOS4_GPK0(3); gpio <= EXYNOS4_GPK0(6); gpio++) { + /* Data pin GPK0[3:6] to special-funtion 2 */ + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } + default: + break; + } + + if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { + s3c_gpio_cfgpin(EXYNOS4_GPK0(2), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(EXYNOS4_GPK0(2), S3C_GPIO_PULL_UP); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } +} + +void exynos4_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) +{ + struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; + unsigned int gpio; + + /* Set all the necessary GPK1[0:1] pins to special-function 2 */ + for (gpio = EXYNOS4_GPK1(0); gpio < EXYNOS4_GPK1(2); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } + + for (gpio = EXYNOS4_GPK1(3); gpio <= EXYNOS4_GPK1(6); gpio++) { + /* Data pin GPK1[3:6] to special-function 2 */ + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } + + if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { + s3c_gpio_cfgpin(EXYNOS4_GPK1(2), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(EXYNOS4_GPK1(2), S3C_GPIO_PULL_UP); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } +} + +void exynos4_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) +{ + struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; + unsigned int gpio; + + /* Set all the necessary GPK2[0:1] pins to special-function 2 */ + for (gpio = EXYNOS4_GPK2(0); gpio < EXYNOS4_GPK2(2); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } + + switch (width) { + case 8: + for (gpio = EXYNOS4_GPK3(3); gpio <= EXYNOS4_GPK3(6); gpio++) { + /* Data pin GPK3[3:6] to special-function 3 */ + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } + case 4: + for (gpio = EXYNOS4_GPK2(3); gpio <= EXYNOS4_GPK2(6); gpio++) { + /* Data pin GPK2[3:6] to special-function 2 */ + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } + default: + break; + } + + if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { + s3c_gpio_cfgpin(EXYNOS4_GPK2(2), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(EXYNOS4_GPK2(2), S3C_GPIO_PULL_UP); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } +} + +void exynos4_setup_sdhci3_cfg_gpio(struct platform_device *dev, int width) +{ + struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; + unsigned int gpio; + + /* Set all the necessary GPK3[0:1] pins to special-function 2 */ + for (gpio = EXYNOS4_GPK3(0); gpio < EXYNOS4_GPK3(2); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } + + for (gpio = EXYNOS4_GPK3(3); gpio <= EXYNOS4_GPK3(6); gpio++) { + /* Data pin GPK3[3:6] to special-function 2 */ + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } + + if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { + s3c_gpio_cfgpin(EXYNOS4_GPK3(2), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(EXYNOS4_GPK3(2), S3C_GPIO_PULL_UP); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } +} diff --git a/arch/arm/mach-exynos4/setup-sdhci.c b/arch/arm/mach-exynos4/setup-sdhci.c new file mode 100644 index 00000000000..85f9433d483 --- /dev/null +++ b/arch/arm/mach-exynos4/setup-sdhci.c @@ -0,0 +1,69 @@ +/* linux/arch/arm/mach-exynos4/setup-sdhci.c + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4 - Helper functions for settign up SDHCI device(s) (HSMMC) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include + +#include +#include + +#include + +/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ + +char *exynos4_hsmmc_clksrcs[4] = { + [0] = NULL, + [1] = NULL, + [2] = "sclk_mmc", /* mmc_bus */ + [3] = NULL, +}; + +void exynos4_setup_sdhci_cfg_card(struct platform_device *dev, void __iomem *r, + struct mmc_ios *ios, struct mmc_card *card) +{ + u32 ctrl2, ctrl3; + + /* don't need to alter anything acording to card-type */ + + ctrl2 = readl(r + S3C_SDHCI_CONTROL2); + + /* select base clock source to HCLK */ + + ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK; + + /* + * clear async mode, enable conflict mask, rx feedback ctrl, SD + * clk hold and no use debounce count + */ + + ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR | + S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK | + S3C_SDHCI_CTRL2_ENFBCLKRX | + S3C_SDHCI_CTRL2_DFCNT_NONE | + S3C_SDHCI_CTRL2_ENCLKOUTHOLD); + + /* Tx and Rx feedback clock delay control */ + + if (ios->clock < 25 * 1000000) + ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 | + S3C_SDHCI_CTRL3_FCSEL2 | + S3C_SDHCI_CTRL3_FCSEL1 | + S3C_SDHCI_CTRL3_FCSEL0); + else + ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0); + + writel(ctrl2, r + S3C_SDHCI_CONTROL2); + writel(ctrl3, r + S3C_SDHCI_CONTROL3); +} diff --git a/arch/arm/mach-s5pv310/dev-audio.c b/arch/arm/mach-s5pv310/dev-audio.c deleted file mode 100644 index a1964242f0f..00000000000 --- a/arch/arm/mach-s5pv310/dev-audio.c +++ /dev/null @@ -1,364 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/dev-audio.c - * - * Copyright (c) 2010 Samsung Electronics Co. Ltd - * Jaswinder Singh - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include - -#include -#include - -#include -#include -#include - -static const char *rclksrc[] = { - [0] = "busclk", - [1] = "i2sclk", -}; - -static int s5pv310_cfg_i2s(struct platform_device *pdev) -{ - /* configure GPIO for i2s port */ - switch (pdev->id) { - case 0: - s3c_gpio_cfgpin_range(S5PV310_GPZ(0), 7, S3C_GPIO_SFN(2)); - break; - case 1: - s3c_gpio_cfgpin_range(S5PV310_GPC0(0), 5, S3C_GPIO_SFN(2)); - break; - case 2: - s3c_gpio_cfgpin_range(S5PV310_GPC1(0), 5, S3C_GPIO_SFN(4)); - break; - default: - printk(KERN_ERR "Invalid Device %d\n", pdev->id); - return -EINVAL; - } - - return 0; -} - -static struct s3c_audio_pdata i2sv5_pdata = { - .cfg_gpio = s5pv310_cfg_i2s, - .type = { - .i2s = { - .quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI - | QUIRK_NEED_RSTCLR, - .src_clk = rclksrc, - }, - }, -}; - -static struct resource s5pv310_i2s0_resource[] = { - [0] = { - .start = S5PV310_PA_I2S0, - .end = S5PV310_PA_I2S0 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_I2S0_TX, - .end = DMACH_I2S0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_I2S0_RX, - .end = DMACH_I2S0_RX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = DMACH_I2S0S_TX, - .end = DMACH_I2S0S_TX, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device s5pv310_device_i2s0 = { - .name = "samsung-i2s", - .id = 0, - .num_resources = ARRAY_SIZE(s5pv310_i2s0_resource), - .resource = s5pv310_i2s0_resource, - .dev = { - .platform_data = &i2sv5_pdata, - }, -}; - -static const char *rclksrc_v3[] = { - [0] = "sclk_i2s", - [1] = "no_such_clock", -}; - -static struct s3c_audio_pdata i2sv3_pdata = { - .cfg_gpio = s5pv310_cfg_i2s, - .type = { - .i2s = { - .quirks = QUIRK_NO_MUXPSR, - .src_clk = rclksrc_v3, - }, - }, -}; - -static struct resource s5pv310_i2s1_resource[] = { - [0] = { - .start = S5PV310_PA_I2S1, - .end = S5PV310_PA_I2S1 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_I2S1_TX, - .end = DMACH_I2S1_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_I2S1_RX, - .end = DMACH_I2S1_RX, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device s5pv310_device_i2s1 = { - .name = "samsung-i2s", - .id = 1, - .num_resources = ARRAY_SIZE(s5pv310_i2s1_resource), - .resource = s5pv310_i2s1_resource, - .dev = { - .platform_data = &i2sv3_pdata, - }, -}; - -static struct resource s5pv310_i2s2_resource[] = { - [0] = { - .start = S5PV310_PA_I2S2, - .end = S5PV310_PA_I2S2 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_I2S2_TX, - .end = DMACH_I2S2_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_I2S2_RX, - .end = DMACH_I2S2_RX, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device s5pv310_device_i2s2 = { - .name = "samsung-i2s", - .id = 2, - .num_resources = ARRAY_SIZE(s5pv310_i2s2_resource), - .resource = s5pv310_i2s2_resource, - .dev = { - .platform_data = &i2sv3_pdata, - }, -}; - -/* PCM Controller platform_devices */ - -static int s5pv310_pcm_cfg_gpio(struct platform_device *pdev) -{ - switch (pdev->id) { - case 0: - s3c_gpio_cfgpin_range(S5PV310_GPZ(0), 5, S3C_GPIO_SFN(3)); - break; - case 1: - s3c_gpio_cfgpin_range(S5PV310_GPC0(0), 5, S3C_GPIO_SFN(3)); - break; - case 2: - s3c_gpio_cfgpin_range(S5PV310_GPC1(0), 5, S3C_GPIO_SFN(3)); - break; - default: - printk(KERN_DEBUG "Invalid PCM Controller number!"); - return -EINVAL; - } - - return 0; -} - -static struct s3c_audio_pdata s3c_pcm_pdata = { - .cfg_gpio = s5pv310_pcm_cfg_gpio, -}; - -static struct resource s5pv310_pcm0_resource[] = { - [0] = { - .start = S5PV310_PA_PCM0, - .end = S5PV310_PA_PCM0 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_PCM0_TX, - .end = DMACH_PCM0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_PCM0_RX, - .end = DMACH_PCM0_RX, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device s5pv310_device_pcm0 = { - .name = "samsung-pcm", - .id = 0, - .num_resources = ARRAY_SIZE(s5pv310_pcm0_resource), - .resource = s5pv310_pcm0_resource, - .dev = { - .platform_data = &s3c_pcm_pdata, - }, -}; - -static struct resource s5pv310_pcm1_resource[] = { - [0] = { - .start = S5PV310_PA_PCM1, - .end = S5PV310_PA_PCM1 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_PCM1_TX, - .end = DMACH_PCM1_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_PCM1_RX, - .end = DMACH_PCM1_RX, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device s5pv310_device_pcm1 = { - .name = "samsung-pcm", - .id = 1, - .num_resources = ARRAY_SIZE(s5pv310_pcm1_resource), - .resource = s5pv310_pcm1_resource, - .dev = { - .platform_data = &s3c_pcm_pdata, - }, -}; - -static struct resource s5pv310_pcm2_resource[] = { - [0] = { - .start = S5PV310_PA_PCM2, - .end = S5PV310_PA_PCM2 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_PCM2_TX, - .end = DMACH_PCM2_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_PCM2_RX, - .end = DMACH_PCM2_RX, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device s5pv310_device_pcm2 = { - .name = "samsung-pcm", - .id = 2, - .num_resources = ARRAY_SIZE(s5pv310_pcm2_resource), - .resource = s5pv310_pcm2_resource, - .dev = { - .platform_data = &s3c_pcm_pdata, - }, -}; - -/* AC97 Controller platform devices */ - -static int s5pv310_ac97_cfg_gpio(struct platform_device *pdev) -{ - return s3c_gpio_cfgpin_range(S5PV310_GPC0(0), 5, S3C_GPIO_SFN(4)); -} - -static struct resource s5pv310_ac97_resource[] = { - [0] = { - .start = S5PV310_PA_AC97, - .end = S5PV310_PA_AC97 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_AC97_PCMOUT, - .end = DMACH_AC97_PCMOUT, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_AC97_PCMIN, - .end = DMACH_AC97_PCMIN, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = DMACH_AC97_MICIN, - .end = DMACH_AC97_MICIN, - .flags = IORESOURCE_DMA, - }, - [4] = { - .start = IRQ_AC97, - .end = IRQ_AC97, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct s3c_audio_pdata s3c_ac97_pdata = { - .cfg_gpio = s5pv310_ac97_cfg_gpio, -}; - -static u64 s5pv310_ac97_dmamask = DMA_BIT_MASK(32); - -struct platform_device s5pv310_device_ac97 = { - .name = "samsung-ac97", - .id = -1, - .num_resources = ARRAY_SIZE(s5pv310_ac97_resource), - .resource = s5pv310_ac97_resource, - .dev = { - .platform_data = &s3c_ac97_pdata, - .dma_mask = &s5pv310_ac97_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -/* S/PDIF Controller platform_device */ - -static int s5pv310_spdif_cfg_gpio(struct platform_device *pdev) -{ - s3c_gpio_cfgpin_range(S5PV310_GPC1(0), 2, S3C_GPIO_SFN(3)); - - return 0; -} - -static struct resource s5pv310_spdif_resource[] = { - [0] = { - .start = S5PV310_PA_SPDIF, - .end = S5PV310_PA_SPDIF + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_SPDIF, - .end = DMACH_SPDIF, - .flags = IORESOURCE_DMA, - }, -}; - -static struct s3c_audio_pdata samsung_spdif_pdata = { - .cfg_gpio = s5pv310_spdif_cfg_gpio, -}; - -static u64 s5pv310_spdif_dmamask = DMA_BIT_MASK(32); - -struct platform_device s5pv310_device_spdif = { - .name = "samsung-spdif", - .id = -1, - .num_resources = ARRAY_SIZE(s5pv310_spdif_resource), - .resource = s5pv310_spdif_resource, - .dev = { - .platform_data = &samsung_spdif_pdata, - .dma_mask = &s5pv310_spdif_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; diff --git a/arch/arm/mach-s5pv310/dev-pd.c b/arch/arm/mach-s5pv310/dev-pd.c deleted file mode 100644 index 58a50c2d0b6..00000000000 --- a/arch/arm/mach-s5pv310/dev-pd.c +++ /dev/null @@ -1,139 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/dev-pd.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5PV310 - Power Domain support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include - -#include - -#include - -static int s5pv310_pd_enable(struct device *dev) -{ - struct samsung_pd_info *pdata = dev->platform_data; - u32 timeout; - - __raw_writel(S5P_INT_LOCAL_PWR_EN, pdata->base); - - /* Wait max 1ms */ - timeout = 10; - while ((__raw_readl(pdata->base + 0x4) & S5P_INT_LOCAL_PWR_EN) - != S5P_INT_LOCAL_PWR_EN) { - if (timeout == 0) { - printk(KERN_ERR "Power domain %s enable failed.\n", - dev_name(dev)); - return -ETIMEDOUT; - } - timeout--; - udelay(100); - } - - return 0; -} - -static int s5pv310_pd_disable(struct device *dev) -{ - struct samsung_pd_info *pdata = dev->platform_data; - u32 timeout; - - __raw_writel(0, pdata->base); - - /* Wait max 1ms */ - timeout = 10; - while (__raw_readl(pdata->base + 0x4) & S5P_INT_LOCAL_PWR_EN) { - if (timeout == 0) { - printk(KERN_ERR "Power domain %s disable failed.\n", - dev_name(dev)); - return -ETIMEDOUT; - } - timeout--; - udelay(100); - } - - return 0; -} - -struct platform_device s5pv310_device_pd[] = { - { - .name = "samsung-pd", - .id = 0, - .dev = { - .platform_data = &(struct samsung_pd_info) { - .enable = s5pv310_pd_enable, - .disable = s5pv310_pd_disable, - .base = S5P_PMU_MFC_CONF, - }, - }, - }, { - .name = "samsung-pd", - .id = 1, - .dev = { - .platform_data = &(struct samsung_pd_info) { - .enable = s5pv310_pd_enable, - .disable = s5pv310_pd_disable, - .base = S5P_PMU_G3D_CONF, - }, - }, - }, { - .name = "samsung-pd", - .id = 2, - .dev = { - .platform_data = &(struct samsung_pd_info) { - .enable = s5pv310_pd_enable, - .disable = s5pv310_pd_disable, - .base = S5P_PMU_LCD0_CONF, - }, - }, - }, { - .name = "samsung-pd", - .id = 3, - .dev = { - .platform_data = &(struct samsung_pd_info) { - .enable = s5pv310_pd_enable, - .disable = s5pv310_pd_disable, - .base = S5P_PMU_LCD1_CONF, - }, - }, - }, { - .name = "samsung-pd", - .id = 4, - .dev = { - .platform_data = &(struct samsung_pd_info) { - .enable = s5pv310_pd_enable, - .disable = s5pv310_pd_disable, - .base = S5P_PMU_TV_CONF, - }, - }, - }, { - .name = "samsung-pd", - .id = 5, - .dev = { - .platform_data = &(struct samsung_pd_info) { - .enable = s5pv310_pd_enable, - .disable = s5pv310_pd_disable, - .base = S5P_PMU_CAM_CONF, - }, - }, - }, { - .name = "samsung-pd", - .id = 6, - .dev = { - .platform_data = &(struct samsung_pd_info) { - .enable = s5pv310_pd_enable, - .disable = s5pv310_pd_disable, - .base = S5P_PMU_GPS_CONF, - }, - }, - }, -}; diff --git a/arch/arm/mach-s5pv310/dev-sysmmu.c b/arch/arm/mach-s5pv310/dev-sysmmu.c deleted file mode 100644 index e1bb200ac0f..00000000000 --- a/arch/arm/mach-s5pv310/dev-sysmmu.c +++ /dev/null @@ -1,187 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/dev-sysmmu.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include - -#include -#include - -static struct resource s5pv310_sysmmu_resource[] = { - [0] = { - .start = S5PV310_PA_SYSMMU_MDMA, - .end = S5PV310_PA_SYSMMU_MDMA + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_SYSMMU_MDMA0_0, - .end = IRQ_SYSMMU_MDMA0_0, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = S5PV310_PA_SYSMMU_SSS, - .end = S5PV310_PA_SYSMMU_SSS + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [3] = { - .start = IRQ_SYSMMU_SSS_0, - .end = IRQ_SYSMMU_SSS_0, - .flags = IORESOURCE_IRQ, - }, - [4] = { - .start = S5PV310_PA_SYSMMU_FIMC0, - .end = S5PV310_PA_SYSMMU_FIMC0 + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [5] = { - .start = IRQ_SYSMMU_FIMC0_0, - .end = IRQ_SYSMMU_FIMC0_0, - .flags = IORESOURCE_IRQ, - }, - [6] = { - .start = S5PV310_PA_SYSMMU_FIMC1, - .end = S5PV310_PA_SYSMMU_FIMC1 + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [7] = { - .start = IRQ_SYSMMU_FIMC1_0, - .end = IRQ_SYSMMU_FIMC1_0, - .flags = IORESOURCE_IRQ, - }, - [8] = { - .start = S5PV310_PA_SYSMMU_FIMC2, - .end = S5PV310_PA_SYSMMU_FIMC2 + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [9] = { - .start = IRQ_SYSMMU_FIMC2_0, - .end = IRQ_SYSMMU_FIMC2_0, - .flags = IORESOURCE_IRQ, - }, - [10] = { - .start = S5PV310_PA_SYSMMU_FIMC3, - .end = S5PV310_PA_SYSMMU_FIMC3 + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [11] = { - .start = IRQ_SYSMMU_FIMC3_0, - .end = IRQ_SYSMMU_FIMC3_0, - .flags = IORESOURCE_IRQ, - }, - [12] = { - .start = S5PV310_PA_SYSMMU_JPEG, - .end = S5PV310_PA_SYSMMU_JPEG + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [13] = { - .start = IRQ_SYSMMU_JPEG_0, - .end = IRQ_SYSMMU_JPEG_0, - .flags = IORESOURCE_IRQ, - }, - [14] = { - .start = S5PV310_PA_SYSMMU_FIMD0, - .end = S5PV310_PA_SYSMMU_FIMD0 + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [15] = { - .start = IRQ_SYSMMU_LCD0_M0_0, - .end = IRQ_SYSMMU_LCD0_M0_0, - .flags = IORESOURCE_IRQ, - }, - [16] = { - .start = S5PV310_PA_SYSMMU_FIMD1, - .end = S5PV310_PA_SYSMMU_FIMD1 + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [17] = { - .start = IRQ_SYSMMU_LCD1_M1_0, - .end = IRQ_SYSMMU_LCD1_M1_0, - .flags = IORESOURCE_IRQ, - }, - [18] = { - .start = S5PV310_PA_SYSMMU_PCIe, - .end = S5PV310_PA_SYSMMU_PCIe + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [19] = { - .start = IRQ_SYSMMU_PCIE_0, - .end = IRQ_SYSMMU_PCIE_0, - .flags = IORESOURCE_IRQ, - }, - [20] = { - .start = S5PV310_PA_SYSMMU_G2D, - .end = S5PV310_PA_SYSMMU_G2D + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [21] = { - .start = IRQ_SYSMMU_2D_0, - .end = IRQ_SYSMMU_2D_0, - .flags = IORESOURCE_IRQ, - }, - [22] = { - .start = S5PV310_PA_SYSMMU_ROTATOR, - .end = S5PV310_PA_SYSMMU_ROTATOR + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [23] = { - .start = IRQ_SYSMMU_ROTATOR_0, - .end = IRQ_SYSMMU_ROTATOR_0, - .flags = IORESOURCE_IRQ, - }, - [24] = { - .start = S5PV310_PA_SYSMMU_MDMA2, - .end = S5PV310_PA_SYSMMU_MDMA2 + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [25] = { - .start = IRQ_SYSMMU_MDMA1_0, - .end = IRQ_SYSMMU_MDMA1_0, - .flags = IORESOURCE_IRQ, - }, - [26] = { - .start = S5PV310_PA_SYSMMU_TV, - .end = S5PV310_PA_SYSMMU_TV + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [27] = { - .start = IRQ_SYSMMU_TV_M0_0, - .end = IRQ_SYSMMU_TV_M0_0, - .flags = IORESOURCE_IRQ, - }, - [28] = { - .start = S5PV310_PA_SYSMMU_MFC_L, - .end = S5PV310_PA_SYSMMU_MFC_L + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [29] = { - .start = IRQ_SYSMMU_MFC_M0_0, - .end = IRQ_SYSMMU_MFC_M0_0, - .flags = IORESOURCE_IRQ, - }, - [30] = { - .start = S5PV310_PA_SYSMMU_MFC_R, - .end = S5PV310_PA_SYSMMU_MFC_R + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [31] = { - .start = IRQ_SYSMMU_MFC_M1_0, - .end = IRQ_SYSMMU_MFC_M1_0, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device s5pv310_device_sysmmu = { - .name = "s5p-sysmmu", - .id = 32, - .num_resources = ARRAY_SIZE(s5pv310_sysmmu_resource), - .resource = s5pv310_sysmmu_resource, -}; - -EXPORT_SYMBOL(s5pv310_device_sysmmu); diff --git a/arch/arm/mach-s5pv310/setup-i2c1.c b/arch/arm/mach-s5pv310/setup-i2c1.c deleted file mode 100644 index 9d07e4e2f14..00000000000 --- a/arch/arm/mach-s5pv310/setup-i2c1.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/arch/arm/mach-s5pv310/setup-i2c1.c - * - * Copyright (C) 2010 Samsung Electronics Co., Ltd. - * - * I2C1 GPIO configuration. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -struct platform_device; /* don't need the contents */ - -#include -#include -#include - -void s3c_i2c1_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(S5PV310_GPD1(2), 2, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); -} diff --git a/arch/arm/mach-s5pv310/setup-i2c2.c b/arch/arm/mach-s5pv310/setup-i2c2.c deleted file mode 100644 index 4163b1233da..00000000000 --- a/arch/arm/mach-s5pv310/setup-i2c2.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/arch/arm/mach-s5pv310/setup-i2c2.c - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * - * I2C2 GPIO configuration. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -struct platform_device; /* don't need the contents */ - -#include -#include -#include - -void s3c_i2c2_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(S5PV310_GPA0(6), 2, - S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); -} diff --git a/arch/arm/mach-s5pv310/setup-i2c3.c b/arch/arm/mach-s5pv310/setup-i2c3.c deleted file mode 100644 index 180f153d2a2..00000000000 --- a/arch/arm/mach-s5pv310/setup-i2c3.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/arch/arm/mach-s5pv310/setup-i2c3.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * - * I2C3 GPIO configuration. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -struct platform_device; /* don't need the contents */ - -#include -#include -#include - -void s3c_i2c3_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(S5PV310_GPA1(2), 2, - S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); -} diff --git a/arch/arm/mach-s5pv310/setup-i2c4.c b/arch/arm/mach-s5pv310/setup-i2c4.c deleted file mode 100644 index 909e8dfc531..00000000000 --- a/arch/arm/mach-s5pv310/setup-i2c4.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/arch/arm/mach-s5pv310/setup-i2c4.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * - * I2C4 GPIO configuration. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -struct platform_device; /* don't need the contents */ - -#include -#include -#include - -void s3c_i2c4_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(S5PV310_GPB(2), 2, - S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); -} diff --git a/arch/arm/mach-s5pv310/setup-i2c5.c b/arch/arm/mach-s5pv310/setup-i2c5.c deleted file mode 100644 index 5d0fa4ac028..00000000000 --- a/arch/arm/mach-s5pv310/setup-i2c5.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/arch/arm/mach-s5pv310/setup-i2c5.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * - * I2C5 GPIO configuration. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -struct platform_device; /* don't need the contents */ - -#include -#include -#include - -void s3c_i2c5_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(S5PV310_GPB(6), 2, - S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); -} diff --git a/arch/arm/mach-s5pv310/setup-i2c6.c b/arch/arm/mach-s5pv310/setup-i2c6.c deleted file mode 100644 index 34aafab92ac..00000000000 --- a/arch/arm/mach-s5pv310/setup-i2c6.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/arch/arm/mach-s5pv310/setup-i2c6.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * - * I2C6 GPIO configuration. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -struct platform_device; /* don't need the contents */ - -#include -#include -#include - -void s3c_i2c6_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(S5PV310_GPC1(3), 2, - S3C_GPIO_SFN(4), S3C_GPIO_PULL_UP); -} diff --git a/arch/arm/mach-s5pv310/setup-i2c7.c b/arch/arm/mach-s5pv310/setup-i2c7.c deleted file mode 100644 index 9b25b8d1892..00000000000 --- a/arch/arm/mach-s5pv310/setup-i2c7.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/arch/arm/mach-s5pv310/setup-i2c7.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * - * I2C7 GPIO configuration. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -struct platform_device; /* don't need the contents */ - -#include -#include -#include - -void s3c_i2c7_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(S5PV310_GPD0(2), 2, - S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); -} diff --git a/arch/arm/mach-s5pv310/setup-sdhci-gpio.c b/arch/arm/mach-s5pv310/setup-sdhci-gpio.c deleted file mode 100644 index 86d38cc4913..00000000000 --- a/arch/arm/mach-s5pv310/setup-sdhci-gpio.c +++ /dev/null @@ -1,152 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/setup-sdhci-gpio.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5PV310 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -void s5pv310_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) -{ - struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; - unsigned int gpio; - - /* Set all the necessary GPK0[0:1] pins to special-function 2 */ - for (gpio = S5PV310_GPK0(0); gpio < S5PV310_GPK0(2); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } - - switch (width) { - case 8: - for (gpio = S5PV310_GPK1(3); gpio <= S5PV310_GPK1(6); gpio++) { - /* Data pin GPK1[3:6] to special-funtion 3 */ - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } - case 4: - for (gpio = S5PV310_GPK0(3); gpio <= S5PV310_GPK0(6); gpio++) { - /* Data pin GPK0[3:6] to special-funtion 2 */ - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } - default: - break; - } - - if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { - s3c_gpio_cfgpin(S5PV310_GPK0(2), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PV310_GPK0(2), S3C_GPIO_PULL_UP); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } -} - -void s5pv310_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) -{ - struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; - unsigned int gpio; - - /* Set all the necessary GPK1[0:1] pins to special-function 2 */ - for (gpio = S5PV310_GPK1(0); gpio < S5PV310_GPK1(2); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } - - for (gpio = S5PV310_GPK1(3); gpio <= S5PV310_GPK1(6); gpio++) { - /* Data pin GPK1[3:6] to special-function 2 */ - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } - - if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { - s3c_gpio_cfgpin(S5PV310_GPK1(2), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PV310_GPK1(2), S3C_GPIO_PULL_UP); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } -} - -void s5pv310_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) -{ - struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; - unsigned int gpio; - - /* Set all the necessary GPK2[0:1] pins to special-function 2 */ - for (gpio = S5PV310_GPK2(0); gpio < S5PV310_GPK2(2); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } - - switch (width) { - case 8: - for (gpio = S5PV310_GPK3(3); gpio <= S5PV310_GPK3(6); gpio++) { - /* Data pin GPK3[3:6] to special-function 3 */ - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } - case 4: - for (gpio = S5PV310_GPK2(3); gpio <= S5PV310_GPK2(6); gpio++) { - /* Data pin GPK2[3:6] to special-function 2 */ - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } - default: - break; - } - - if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { - s3c_gpio_cfgpin(S5PV310_GPK2(2), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PV310_GPK2(2), S3C_GPIO_PULL_UP); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } -} - -void s5pv310_setup_sdhci3_cfg_gpio(struct platform_device *dev, int width) -{ - struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; - unsigned int gpio; - - /* Set all the necessary GPK3[0:1] pins to special-function 2 */ - for (gpio = S5PV310_GPK3(0); gpio < S5PV310_GPK3(2); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } - - for (gpio = S5PV310_GPK3(3); gpio <= S5PV310_GPK3(6); gpio++) { - /* Data pin GPK3[3:6] to special-function 2 */ - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } - - if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { - s3c_gpio_cfgpin(S5PV310_GPK3(2), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PV310_GPK3(2), S3C_GPIO_PULL_UP); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } -} diff --git a/arch/arm/mach-s5pv310/setup-sdhci.c b/arch/arm/mach-s5pv310/setup-sdhci.c deleted file mode 100644 index db8358fc466..00000000000 --- a/arch/arm/mach-s5pv310/setup-sdhci.c +++ /dev/null @@ -1,69 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/setup-sdhci.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5PV310 - Helper functions for settign up SDHCI device(s) (HSMMC) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include - -#include -#include - -#include - -/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ - -char *s5pv310_hsmmc_clksrcs[4] = { - [0] = NULL, - [1] = NULL, - [2] = "sclk_mmc", /* mmc_bus */ - [3] = NULL, -}; - -void s5pv310_setup_sdhci_cfg_card(struct platform_device *dev, void __iomem *r, - struct mmc_ios *ios, struct mmc_card *card) -{ - u32 ctrl2, ctrl3; - - /* don't need to alter anything acording to card-type */ - - ctrl2 = readl(r + S3C_SDHCI_CONTROL2); - - /* select base clock source to HCLK */ - - ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK; - - /* - * clear async mode, enable conflict mask, rx feedback ctrl, SD - * clk hold and no use debounce count - */ - - ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR | - S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK | - S3C_SDHCI_CTRL2_ENFBCLKRX | - S3C_SDHCI_CTRL2_DFCNT_NONE | - S3C_SDHCI_CTRL2_ENCLKOUTHOLD); - - /* Tx and Rx feedback clock delay control */ - - if (ios->clock < 25 * 1000000) - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 | - S3C_SDHCI_CTRL3_FCSEL2 | - S3C_SDHCI_CTRL3_FCSEL1 | - S3C_SDHCI_CTRL3_FCSEL0); - else - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0); - - writel(ctrl2, r + S3C_SDHCI_CONTROL2); - writel(ctrl3, r + S3C_SDHCI_CONTROL3); -} diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index b4d208b4295..e2b3ab997cf 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -1,4 +1,7 @@ /* arch/arm/plat-samsung/include/plat/devs.h + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * Copyright (c) 2004 Simtec Electronics * Ben Dooks @@ -96,15 +99,15 @@ extern struct platform_device s5pv210_device_iis1; extern struct platform_device s5pv210_device_iis2; extern struct platform_device s5pv210_device_spdif; -extern struct platform_device s5pv310_device_ac97; -extern struct platform_device s5pv310_device_pcm0; -extern struct platform_device s5pv310_device_pcm1; -extern struct platform_device s5pv310_device_pcm2; -extern struct platform_device s5pv310_device_i2s0; -extern struct platform_device s5pv310_device_i2s1; -extern struct platform_device s5pv310_device_i2s2; -extern struct platform_device s5pv310_device_spdif; -extern struct platform_device s5pv310_device_pd[]; +extern struct platform_device exynos4_device_ac97; +extern struct platform_device exynos4_device_pcm0; +extern struct platform_device exynos4_device_pcm1; +extern struct platform_device exynos4_device_pcm2; +extern struct platform_device exynos4_device_i2s0; +extern struct platform_device exynos4_device_i2s1; +extern struct platform_device exynos4_device_i2s2; +extern struct platform_device exynos4_device_spdif; +extern struct platform_device exynos4_device_pd[]; extern struct platform_device s5p6442_device_pcm0; extern struct platform_device s5p6442_device_pcm1; @@ -137,7 +140,7 @@ extern struct platform_device s5p_device_fimc2; extern struct platform_device s5p_device_mipi_csis0; extern struct platform_device s5p_device_mipi_csis1; -extern struct platform_device s5pv310_device_sysmmu; +extern struct platform_device exynos4_device_sysmmu; /* s3c2440 specific devices */ diff --git a/arch/arm/plat-samsung/include/plat/pd.h b/arch/arm/plat-samsung/include/plat/pd.h index 5f0ad85783d..abb4bc32716 100644 --- a/arch/arm/plat-samsung/include/plat/pd.h +++ b/arch/arm/plat-samsung/include/plat/pd.h @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-samsung/include/plat/pd.h * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com * * This program is free software; you can redistribute it and/or modify @@ -17,7 +17,7 @@ struct samsung_pd_info { void __iomem *base; }; -enum s5pv310_pd_block { +enum exynos4_pd_block { PD_MFC, PD_G3D, PD_LCD0, diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index 5a41a0b69ee..b0bdf16549d 100644 --- a/arch/arm/plat-samsung/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -1,4 +1,7 @@ -/* linux/arch/arm/plat-s3c/include/plat/sdhci.h +/* linux/arch/arm/plat-samsung/include/plat/sdhci.h + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics @@ -119,10 +122,10 @@ extern void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *, int w); extern void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *, int w); extern void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *, int w); extern void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *, int w); -extern void s5pv310_setup_sdhci0_cfg_gpio(struct platform_device *, int w); -extern void s5pv310_setup_sdhci1_cfg_gpio(struct platform_device *, int w); -extern void s5pv310_setup_sdhci2_cfg_gpio(struct platform_device *, int w); -extern void s5pv310_setup_sdhci3_cfg_gpio(struct platform_device *, int w); +extern void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *, int w); +extern void exynos4_setup_sdhci1_cfg_gpio(struct platform_device *, int w); +extern void exynos4_setup_sdhci2_cfg_gpio(struct platform_device *, int w); +extern void exynos4_setup_sdhci3_cfg_gpio(struct platform_device *, int w); /* S3C2416 SDHCI setup */ @@ -334,57 +337,57 @@ static inline void s5pv210_default_sdhci3(void) { } #endif /* CONFIG_S5PV210_SETUP_SDHCI */ -/* S5PV310 SDHCI setup */ -#ifdef CONFIG_S5PV310_SETUP_SDHCI -extern char *s5pv310_hsmmc_clksrcs[4]; +/* EXYNOS4 SDHCI setup */ +#ifdef CONFIG_EXYNOS4_SETUP_SDHCI +extern char *exynos4_hsmmc_clksrcs[4]; -extern void s5pv310_setup_sdhci_cfg_card(struct platform_device *dev, +extern void exynos4_setup_sdhci_cfg_card(struct platform_device *dev, void __iomem *r, struct mmc_ios *ios, struct mmc_card *card); -static inline void s5pv310_default_sdhci0(void) +static inline void exynos4_default_sdhci0(void) { #ifdef CONFIG_S3C_DEV_HSMMC - s3c_hsmmc0_def_platdata.clocks = s5pv310_hsmmc_clksrcs; - s3c_hsmmc0_def_platdata.cfg_gpio = s5pv310_setup_sdhci0_cfg_gpio; - s3c_hsmmc0_def_platdata.cfg_card = s5pv310_setup_sdhci_cfg_card; + s3c_hsmmc0_def_platdata.clocks = exynos4_hsmmc_clksrcs; + s3c_hsmmc0_def_platdata.cfg_gpio = exynos4_setup_sdhci0_cfg_gpio; + s3c_hsmmc0_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card; #endif } -static inline void s5pv310_default_sdhci1(void) +static inline void exynos4_default_sdhci1(void) { #ifdef CONFIG_S3C_DEV_HSMMC1 - s3c_hsmmc1_def_platdata.clocks = s5pv310_hsmmc_clksrcs; - s3c_hsmmc1_def_platdata.cfg_gpio = s5pv310_setup_sdhci1_cfg_gpio; - s3c_hsmmc1_def_platdata.cfg_card = s5pv310_setup_sdhci_cfg_card; + s3c_hsmmc1_def_platdata.clocks = exynos4_hsmmc_clksrcs; + s3c_hsmmc1_def_platdata.cfg_gpio = exynos4_setup_sdhci1_cfg_gpio; + s3c_hsmmc1_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card; #endif } -static inline void s5pv310_default_sdhci2(void) +static inline void exynos4_default_sdhci2(void) { #ifdef CONFIG_S3C_DEV_HSMMC2 - s3c_hsmmc2_def_platdata.clocks = s5pv310_hsmmc_clksrcs; - s3c_hsmmc2_def_platdata.cfg_gpio = s5pv310_setup_sdhci2_cfg_gpio; - s3c_hsmmc2_def_platdata.cfg_card = s5pv310_setup_sdhci_cfg_card; + s3c_hsmmc2_def_platdata.clocks = exynos4_hsmmc_clksrcs; + s3c_hsmmc2_def_platdata.cfg_gpio = exynos4_setup_sdhci2_cfg_gpio; + s3c_hsmmc2_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card; #endif } -static inline void s5pv310_default_sdhci3(void) +static inline void exynos4_default_sdhci3(void) { #ifdef CONFIG_S3C_DEV_HSMMC3 - s3c_hsmmc3_def_platdata.clocks = s5pv310_hsmmc_clksrcs; - s3c_hsmmc3_def_platdata.cfg_gpio = s5pv310_setup_sdhci3_cfg_gpio; - s3c_hsmmc3_def_platdata.cfg_card = s5pv310_setup_sdhci_cfg_card; + s3c_hsmmc3_def_platdata.clocks = exynos4_hsmmc_clksrcs; + s3c_hsmmc3_def_platdata.cfg_gpio = exynos4_setup_sdhci3_cfg_gpio; + s3c_hsmmc3_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card; #endif } #else -static inline void s5pv310_default_sdhci0(void) { } -static inline void s5pv310_default_sdhci1(void) { } -static inline void s5pv310_default_sdhci2(void) { } -static inline void s5pv310_default_sdhci3(void) { } +static inline void exynos4_default_sdhci0(void) { } +static inline void exynos4_default_sdhci1(void) { } +static inline void exynos4_default_sdhci2(void) { } +static inline void exynos4_default_sdhci3(void) { } -#endif /* CONFIG_S5PV310_SETUP_SDHCI */ +#endif /* CONFIG_EXYNOS4_SETUP_SDHCI */ #endif /* __PLAT_S3C_SDHCI_H */ -- cgit v1.2.3-18-g5258 From d11135ca4f6e626e1c8aa78de6d472a11a9e9811 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Mon, 14 Feb 2011 14:59:52 +0900 Subject: ARM: EXYNOS4: Moved board support files This patch moves board support files, SMDKC210, SMKDV310 and UNIVERSAL_C210 into arch/arm/mach-exynos4/ according to the change of ARCH name, EXYNOS4. Cc: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos4/mach-smdkc210.c | 223 ++++++++++++++++++++++++++ arch/arm/mach-exynos4/mach-smdkv310.c | 224 ++++++++++++++++++++++++++ arch/arm/mach-exynos4/mach-universal_c210.c | 237 ++++++++++++++++++++++++++++ arch/arm/mach-s5pv310/mach-smdkc210.c | 223 -------------------------- arch/arm/mach-s5pv310/mach-smdkv310.c | 224 -------------------------- arch/arm/mach-s5pv310/mach-universal_c210.c | 237 ---------------------------- 6 files changed, 684 insertions(+), 684 deletions(-) create mode 100644 arch/arm/mach-exynos4/mach-smdkc210.c create mode 100644 arch/arm/mach-exynos4/mach-smdkv310.c create mode 100644 arch/arm/mach-exynos4/mach-universal_c210.c delete mode 100644 arch/arm/mach-s5pv310/mach-smdkc210.c delete mode 100644 arch/arm/mach-s5pv310/mach-smdkv310.c delete mode 100644 arch/arm/mach-s5pv310/mach-universal_c210.c (limited to 'arch') diff --git a/arch/arm/mach-exynos4/mach-smdkc210.c b/arch/arm/mach-exynos4/mach-smdkc210.c new file mode 100644 index 00000000000..25a25681812 --- /dev/null +++ b/arch/arm/mach-exynos4/mach-smdkc210.c @@ -0,0 +1,223 @@ +/* linux/arch/arm/mach-exynos4/mach-smdkc210.c + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +/* Following are default values for UCON, ULCON and UFCON UART registers */ +#define SMDKC210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define SMDKC210_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define SMDKC210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG4 | \ + S5PV210_UFCON_RXTRIG4) + +static struct s3c2410_uartcfg smdkc210_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = SMDKC210_UCON_DEFAULT, + .ulcon = SMDKC210_ULCON_DEFAULT, + .ufcon = SMDKC210_UFCON_DEFAULT, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = SMDKC210_UCON_DEFAULT, + .ulcon = SMDKC210_ULCON_DEFAULT, + .ufcon = SMDKC210_UFCON_DEFAULT, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = SMDKC210_UCON_DEFAULT, + .ulcon = SMDKC210_ULCON_DEFAULT, + .ufcon = SMDKC210_UFCON_DEFAULT, + }, + [3] = { + .hwport = 3, + .flags = 0, + .ucon = SMDKC210_UCON_DEFAULT, + .ulcon = SMDKC210_ULCON_DEFAULT, + .ufcon = SMDKC210_UFCON_DEFAULT, + }, +}; + +static struct s3c_sdhci_platdata smdkc210_hsmmc0_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_GPIO, + .ext_cd_gpio = EXYNOS4_GPK0(2), + .ext_cd_gpio_invert = 1, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT + .max_width = 8, + .host_caps = MMC_CAP_8_BIT_DATA, +#endif +}; + +static struct s3c_sdhci_platdata smdkc210_hsmmc1_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_GPIO, + .ext_cd_gpio = EXYNOS4_GPK0(2), + .ext_cd_gpio_invert = 1, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +}; + +static struct s3c_sdhci_platdata smdkc210_hsmmc2_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_GPIO, + .ext_cd_gpio = EXYNOS4_GPK2(2), + .ext_cd_gpio_invert = 1, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT + .max_width = 8, + .host_caps = MMC_CAP_8_BIT_DATA, +#endif +}; + +static struct s3c_sdhci_platdata smdkc210_hsmmc3_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_GPIO, + .ext_cd_gpio = EXYNOS4_GPK2(2), + .ext_cd_gpio_invert = 1, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +}; + +static struct resource smdkc210_smsc911x_resources[] = { + [0] = { + .start = EXYNOS4_PA_SROM_BANK(1), + .end = EXYNOS4_PA_SROM_BANK(1) + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_EINT(5), + .end = IRQ_EINT(5), + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, + }, +}; + +static struct smsc911x_platform_config smsc9215_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY, + .phy_interface = PHY_INTERFACE_MODE_MII, + .mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67}, +}; + +static struct platform_device smdkc210_smsc911x = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smdkc210_smsc911x_resources), + .resource = smdkc210_smsc911x_resources, + .dev = { + .platform_data = &smsc9215_config, + }, +}; + +static struct i2c_board_info i2c_devs1[] __initdata = { + {I2C_BOARD_INFO("wm8994", 0x1a),}, +}; + +static struct platform_device *smdkc210_devices[] __initdata = { + &s3c_device_hsmmc0, + &s3c_device_hsmmc1, + &s3c_device_hsmmc2, + &s3c_device_hsmmc3, + &s3c_device_i2c1, + &s3c_device_rtc, + &s3c_device_wdt, + &exynos4_device_ac97, + &exynos4_device_i2s0, + &exynos4_device_pd[PD_MFC], + &exynos4_device_pd[PD_G3D], + &exynos4_device_pd[PD_LCD0], + &exynos4_device_pd[PD_LCD1], + &exynos4_device_pd[PD_CAM], + &exynos4_device_pd[PD_TV], + &exynos4_device_pd[PD_GPS], + &exynos4_device_sysmmu, + &samsung_asoc_dma, + &smdkc210_smsc911x, +}; + +static void __init smdkc210_smsc911x_init(void) +{ + u32 cs1; + + /* configure nCS1 width to 16 bits */ + cs1 = __raw_readl(S5P_SROM_BW) & + ~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT); + cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) | + (1 << S5P_SROM_BW__WAITENABLE__SHIFT) | + (1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) << + S5P_SROM_BW__NCS1__SHIFT; + __raw_writel(cs1, S5P_SROM_BW); + + /* set timing for nCS1 suitable for ethernet chip */ + __raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) | + (0x9 << S5P_SROM_BCX__TACP__SHIFT) | + (0xc << S5P_SROM_BCX__TCAH__SHIFT) | + (0x1 << S5P_SROM_BCX__TCOH__SHIFT) | + (0x6 << S5P_SROM_BCX__TACC__SHIFT) | + (0x1 << S5P_SROM_BCX__TCOS__SHIFT) | + (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1); +} + +static void __init smdkc210_map_io(void) +{ + s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s3c24xx_init_clocks(24000000); + s3c24xx_init_uarts(smdkc210_uartcfgs, ARRAY_SIZE(smdkc210_uartcfgs)); +} + +static void __init smdkc210_machine_init(void) +{ + s3c_i2c1_set_platdata(NULL); + i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); + + smdkc210_smsc911x_init(); + + s3c_sdhci0_set_platdata(&smdkc210_hsmmc0_pdata); + s3c_sdhci1_set_platdata(&smdkc210_hsmmc1_pdata); + s3c_sdhci2_set_platdata(&smdkc210_hsmmc2_pdata); + s3c_sdhci3_set_platdata(&smdkc210_hsmmc3_pdata); + + platform_add_devices(smdkc210_devices, ARRAY_SIZE(smdkc210_devices)); +} + +MACHINE_START(SMDKC210, "SMDKC210") + /* Maintainer: Kukjin Kim */ + .boot_params = S5P_PA_SDRAM + 0x100, + .init_irq = exynos4_init_irq, + .map_io = smdkc210_map_io, + .init_machine = smdkc210_machine_init, + .timer = &exynos4_timer, +MACHINE_END diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c new file mode 100644 index 00000000000..07860a5b2f5 --- /dev/null +++ b/arch/arm/mach-exynos4/mach-smdkv310.c @@ -0,0 +1,224 @@ +/* linux/arch/arm/mach-exynos4/mach-smdkv310.c + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +/* Following are default values for UCON, ULCON and UFCON UART registers */ +#define SMDKV310_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define SMDKV310_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define SMDKV310_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG4 | \ + S5PV210_UFCON_RXTRIG4) + +static struct s3c2410_uartcfg smdkv310_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = SMDKV310_UCON_DEFAULT, + .ulcon = SMDKV310_ULCON_DEFAULT, + .ufcon = SMDKV310_UFCON_DEFAULT, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = SMDKV310_UCON_DEFAULT, + .ulcon = SMDKV310_ULCON_DEFAULT, + .ufcon = SMDKV310_UFCON_DEFAULT, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = SMDKV310_UCON_DEFAULT, + .ulcon = SMDKV310_ULCON_DEFAULT, + .ufcon = SMDKV310_UFCON_DEFAULT, + }, + [3] = { + .hwport = 3, + .flags = 0, + .ucon = SMDKV310_UCON_DEFAULT, + .ulcon = SMDKV310_ULCON_DEFAULT, + .ufcon = SMDKV310_UFCON_DEFAULT, + }, +}; + +static struct s3c_sdhci_platdata smdkv310_hsmmc0_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_GPIO, + .ext_cd_gpio = EXYNOS4_GPK0(2), + .ext_cd_gpio_invert = 1, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT + .max_width = 8, + .host_caps = MMC_CAP_8_BIT_DATA, +#endif +}; + +static struct s3c_sdhci_platdata smdkv310_hsmmc1_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_GPIO, + .ext_cd_gpio = EXYNOS4_GPK0(2), + .ext_cd_gpio_invert = 1, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +}; + +static struct s3c_sdhci_platdata smdkv310_hsmmc2_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_GPIO, + .ext_cd_gpio = EXYNOS4_GPK2(2), + .ext_cd_gpio_invert = 1, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT + .max_width = 8, + .host_caps = MMC_CAP_8_BIT_DATA, +#endif +}; + +static struct s3c_sdhci_platdata smdkv310_hsmmc3_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_GPIO, + .ext_cd_gpio = EXYNOS4_GPK2(2), + .ext_cd_gpio_invert = 1, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +}; + +static struct resource smdkv310_smsc911x_resources[] = { + [0] = { + .start = EXYNOS4_PA_SROM_BANK(1), + .end = EXYNOS4_PA_SROM_BANK(1) + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_EINT(5), + .end = IRQ_EINT(5), + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, + }, +}; + +static struct smsc911x_platform_config smsc9215_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY, + .phy_interface = PHY_INTERFACE_MODE_MII, + .mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67}, +}; + +static struct platform_device smdkv310_smsc911x = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smdkv310_smsc911x_resources), + .resource = smdkv310_smsc911x_resources, + .dev = { + .platform_data = &smsc9215_config, + }, +}; + +static struct i2c_board_info i2c_devs1[] __initdata = { + {I2C_BOARD_INFO("wm8994", 0x1a),}, +}; + +static struct platform_device *smdkv310_devices[] __initdata = { + &s3c_device_hsmmc0, + &s3c_device_hsmmc1, + &s3c_device_hsmmc2, + &s3c_device_hsmmc3, + &s3c_device_i2c1, + &s3c_device_rtc, + &s3c_device_wdt, + &exynos4_device_ac97, + &exynos4_device_i2s0, + &exynos4_device_pd[PD_MFC], + &exynos4_device_pd[PD_G3D], + &exynos4_device_pd[PD_LCD0], + &exynos4_device_pd[PD_LCD1], + &exynos4_device_pd[PD_CAM], + &exynos4_device_pd[PD_TV], + &exynos4_device_pd[PD_GPS], + &exynos4_device_sysmmu, + &samsung_asoc_dma, + &smdkv310_smsc911x, +}; + +static void __init smdkv310_smsc911x_init(void) +{ + u32 cs1; + + /* configure nCS1 width to 16 bits */ + cs1 = __raw_readl(S5P_SROM_BW) & + ~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT); + cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) | + (1 << S5P_SROM_BW__WAITENABLE__SHIFT) | + (1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) << + S5P_SROM_BW__NCS1__SHIFT; + __raw_writel(cs1, S5P_SROM_BW); + + /* set timing for nCS1 suitable for ethernet chip */ + __raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) | + (0x9 << S5P_SROM_BCX__TACP__SHIFT) | + (0xc << S5P_SROM_BCX__TCAH__SHIFT) | + (0x1 << S5P_SROM_BCX__TCOH__SHIFT) | + (0x6 << S5P_SROM_BCX__TACC__SHIFT) | + (0x1 << S5P_SROM_BCX__TCOS__SHIFT) | + (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1); +} + +static void __init smdkv310_map_io(void) +{ + s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s3c24xx_init_clocks(24000000); + s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs)); +} + +static void __init smdkv310_machine_init(void) +{ + s3c_i2c1_set_platdata(NULL); + i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); + + smdkv310_smsc911x_init(); + + s3c_sdhci0_set_platdata(&smdkv310_hsmmc0_pdata); + s3c_sdhci1_set_platdata(&smdkv310_hsmmc1_pdata); + s3c_sdhci2_set_platdata(&smdkv310_hsmmc2_pdata); + s3c_sdhci3_set_platdata(&smdkv310_hsmmc3_pdata); + + platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices)); +} + +MACHINE_START(SMDKV310, "SMDKV310") + /* Maintainer: Kukjin Kim */ + /* Maintainer: Changhwan Youn */ + .boot_params = S5P_PA_SDRAM + 0x100, + .init_irq = exynos4_init_irq, + .map_io = smdkv310_map_io, + .init_machine = smdkv310_machine_init, + .timer = &exynos4_timer, +MACHINE_END diff --git a/arch/arm/mach-exynos4/mach-universal_c210.c b/arch/arm/mach-exynos4/mach-universal_c210.c new file mode 100644 index 00000000000..b22b6ef2a94 --- /dev/null +++ b/arch/arm/mach-exynos4/mach-universal_c210.c @@ -0,0 +1,237 @@ +/* linux/arch/arm/mach-exynos4/mach-universal_c210.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include +#include + +#include + +/* Following are default values for UCON, ULCON and UFCON UART registers */ +#define UNIVERSAL_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define UNIVERSAL_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define UNIVERSAL_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG256 | \ + S5PV210_UFCON_RXTRIG256) + +static struct s3c2410_uartcfg universal_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .ucon = UNIVERSAL_UCON_DEFAULT, + .ulcon = UNIVERSAL_ULCON_DEFAULT, + .ufcon = UNIVERSAL_UFCON_DEFAULT, + }, + [1] = { + .hwport = 1, + .ucon = UNIVERSAL_UCON_DEFAULT, + .ulcon = UNIVERSAL_ULCON_DEFAULT, + .ufcon = UNIVERSAL_UFCON_DEFAULT, + }, + [2] = { + .hwport = 2, + .ucon = UNIVERSAL_UCON_DEFAULT, + .ulcon = UNIVERSAL_ULCON_DEFAULT, + .ufcon = UNIVERSAL_UFCON_DEFAULT, + }, + [3] = { + .hwport = 3, + .ucon = UNIVERSAL_UCON_DEFAULT, + .ulcon = UNIVERSAL_ULCON_DEFAULT, + .ufcon = UNIVERSAL_UFCON_DEFAULT, + }, +}; + +static struct gpio_keys_button universal_gpio_keys_tables[] = { + { + .code = KEY_VOLUMEUP, + .gpio = EXYNOS4_GPX2(0), /* XEINT16 */ + .desc = "gpio-keys: KEY_VOLUMEUP", + .type = EV_KEY, + .active_low = 1, + .debounce_interval = 1, + }, { + .code = KEY_VOLUMEDOWN, + .gpio = EXYNOS4_GPX2(1), /* XEINT17 */ + .desc = "gpio-keys: KEY_VOLUMEDOWN", + .type = EV_KEY, + .active_low = 1, + .debounce_interval = 1, + }, { + .code = KEY_CONFIG, + .gpio = EXYNOS4_GPX2(2), /* XEINT18 */ + .desc = "gpio-keys: KEY_CONFIG", + .type = EV_KEY, + .active_low = 1, + .debounce_interval = 1, + }, { + .code = KEY_CAMERA, + .gpio = EXYNOS4_GPX2(3), /* XEINT19 */ + .desc = "gpio-keys: KEY_CAMERA", + .type = EV_KEY, + .active_low = 1, + .debounce_interval = 1, + }, { + .code = KEY_OK, + .gpio = EXYNOS4_GPX3(5), /* XEINT29 */ + .desc = "gpio-keys: KEY_OK", + .type = EV_KEY, + .active_low = 1, + .debounce_interval = 1, + }, +}; + +static struct gpio_keys_platform_data universal_gpio_keys_data = { + .buttons = universal_gpio_keys_tables, + .nbuttons = ARRAY_SIZE(universal_gpio_keys_tables), +}; + +static struct platform_device universal_gpio_keys = { + .name = "gpio-keys", + .dev = { + .platform_data = &universal_gpio_keys_data, + }, +}; + +/* eMMC */ +static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = { + .max_width = 8, + .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | + MMC_CAP_DISABLE), + .cd_type = S3C_SDHCI_CD_PERMANENT, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +}; + +static struct regulator_consumer_supply mmc0_supplies[] = { + REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"), +}; + +static struct regulator_init_data mmc0_fixed_voltage_init_data = { + .constraints = { + .name = "VMEM_VDD_2.8V", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(mmc0_supplies), + .consumer_supplies = mmc0_supplies, +}; + +static struct fixed_voltage_config mmc0_fixed_voltage_config = { + .supply_name = "MASSMEMORY_EN", + .microvolts = 2800000, + .gpio = EXYNOS4_GPE1(3), + .enable_high = true, + .init_data = &mmc0_fixed_voltage_init_data, +}; + +static struct platform_device mmc0_fixed_voltage = { + .name = "reg-fixed-voltage", + .id = 0, + .dev = { + .platform_data = &mmc0_fixed_voltage_config, + }, +}; + +/* SD */ +static struct s3c_sdhci_platdata universal_hsmmc2_data __initdata = { + .max_width = 4, + .host_caps = MMC_CAP_4_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | + MMC_CAP_DISABLE, + .ext_cd_gpio = EXYNOS4_GPX3(4), /* XEINT_28 */ + .ext_cd_gpio_invert = 1, + .cd_type = S3C_SDHCI_CD_GPIO, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +}; + +/* WiFi */ +static struct s3c_sdhci_platdata universal_hsmmc3_data __initdata = { + .max_width = 4, + .host_caps = MMC_CAP_4_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | + MMC_CAP_DISABLE, + .cd_type = S3C_SDHCI_CD_EXTERNAL, +}; + +static void __init universal_sdhci_init(void) +{ + s3c_sdhci0_set_platdata(&universal_hsmmc0_data); + s3c_sdhci2_set_platdata(&universal_hsmmc2_data); + s3c_sdhci3_set_platdata(&universal_hsmmc3_data); +} + +/* I2C0 */ +static struct i2c_board_info i2c0_devs[] __initdata = { + /* Camera, To be updated */ +}; + +/* I2C1 */ +static struct i2c_board_info i2c1_devs[] __initdata = { + /* Gyro, To be updated */ +}; + +static struct platform_device *universal_devices[] __initdata = { + /* Samsung Platform Devices */ + &mmc0_fixed_voltage, + &s3c_device_hsmmc0, + &s3c_device_hsmmc2, + &s3c_device_hsmmc3, + + /* Universal Devices */ + &universal_gpio_keys, + &s5p_device_onenand, +}; + +static void __init universal_map_io(void) +{ + s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s3c24xx_init_clocks(24000000); + s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs)); +} + +static void __init universal_machine_init(void) +{ + universal_sdhci_init(); + + i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs)); + i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs)); + + /* Last */ + platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices)); +} + +MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210") + /* Maintainer: Kyungmin Park */ + .boot_params = S5P_PA_SDRAM + 0x100, + .init_irq = exynos4_init_irq, + .map_io = universal_map_io, + .init_machine = universal_machine_init, + .timer = &exynos4_timer, +MACHINE_END diff --git a/arch/arm/mach-s5pv310/mach-smdkc210.c b/arch/arm/mach-s5pv310/mach-smdkc210.c deleted file mode 100644 index d9cab02e23c..00000000000 --- a/arch/arm/mach-s5pv310/mach-smdkc210.c +++ /dev/null @@ -1,223 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/mach-smdkc210.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -/* Following are default values for UCON, ULCON and UFCON UART registers */ -#define SMDKC210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define SMDKC210_ULCON_DEFAULT S3C2410_LCON_CS8 - -#define SMDKC210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S5PV210_UFCON_TXTRIG4 | \ - S5PV210_UFCON_RXTRIG4) - -static struct s3c2410_uartcfg smdkc210_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = SMDKC210_UCON_DEFAULT, - .ulcon = SMDKC210_ULCON_DEFAULT, - .ufcon = SMDKC210_UFCON_DEFAULT, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = SMDKC210_UCON_DEFAULT, - .ulcon = SMDKC210_ULCON_DEFAULT, - .ufcon = SMDKC210_UFCON_DEFAULT, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = SMDKC210_UCON_DEFAULT, - .ulcon = SMDKC210_ULCON_DEFAULT, - .ufcon = SMDKC210_UFCON_DEFAULT, - }, - [3] = { - .hwport = 3, - .flags = 0, - .ucon = SMDKC210_UCON_DEFAULT, - .ulcon = SMDKC210_ULCON_DEFAULT, - .ufcon = SMDKC210_UFCON_DEFAULT, - }, -}; - -static struct s3c_sdhci_platdata smdkc210_hsmmc0_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = S5PV310_GPK0(2), - .ext_cd_gpio_invert = 1, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, -#ifdef CONFIG_S5PV310_SDHCI_CH0_8BIT - .max_width = 8, - .host_caps = MMC_CAP_8_BIT_DATA, -#endif -}; - -static struct s3c_sdhci_platdata smdkc210_hsmmc1_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = S5PV310_GPK0(2), - .ext_cd_gpio_invert = 1, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, -}; - -static struct s3c_sdhci_platdata smdkc210_hsmmc2_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = S5PV310_GPK2(2), - .ext_cd_gpio_invert = 1, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, -#ifdef CONFIG_S5PV310_SDHCI_CH2_8BIT - .max_width = 8, - .host_caps = MMC_CAP_8_BIT_DATA, -#endif -}; - -static struct s3c_sdhci_platdata smdkc210_hsmmc3_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = S5PV310_GPK2(2), - .ext_cd_gpio_invert = 1, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, -}; - -static struct resource smdkc210_smsc911x_resources[] = { - [0] = { - .start = S5PV310_PA_SROM_BANK(1), - .end = S5PV310_PA_SROM_BANK(1) + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_EINT(5), - .end = IRQ_EINT(5), - .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, - }, -}; - -static struct smsc911x_platform_config smsc9215_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, - .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, - .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY, - .phy_interface = PHY_INTERFACE_MODE_MII, - .mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67}, -}; - -static struct platform_device smdkc210_smsc911x = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(smdkc210_smsc911x_resources), - .resource = smdkc210_smsc911x_resources, - .dev = { - .platform_data = &smsc9215_config, - }, -}; - -static struct i2c_board_info i2c_devs1[] __initdata = { - {I2C_BOARD_INFO("wm8994", 0x1a),}, -}; - -static struct platform_device *smdkc210_devices[] __initdata = { - &s3c_device_hsmmc0, - &s3c_device_hsmmc1, - &s3c_device_hsmmc2, - &s3c_device_hsmmc3, - &s3c_device_i2c1, - &s3c_device_rtc, - &s3c_device_wdt, - &s5pv310_device_ac97, - &s5pv310_device_i2s0, - &s5pv310_device_pd[PD_MFC], - &s5pv310_device_pd[PD_G3D], - &s5pv310_device_pd[PD_LCD0], - &s5pv310_device_pd[PD_LCD1], - &s5pv310_device_pd[PD_CAM], - &s5pv310_device_pd[PD_TV], - &s5pv310_device_pd[PD_GPS], - &s5pv310_device_sysmmu, - &samsung_asoc_dma, - &smdkc210_smsc911x, -}; - -static void __init smdkc210_smsc911x_init(void) -{ - u32 cs1; - - /* configure nCS1 width to 16 bits */ - cs1 = __raw_readl(S5P_SROM_BW) & - ~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT); - cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) | - (1 << S5P_SROM_BW__WAITENABLE__SHIFT) | - (1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) << - S5P_SROM_BW__NCS1__SHIFT; - __raw_writel(cs1, S5P_SROM_BW); - - /* set timing for nCS1 suitable for ethernet chip */ - __raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) | - (0x9 << S5P_SROM_BCX__TACP__SHIFT) | - (0xc << S5P_SROM_BCX__TCAH__SHIFT) | - (0x1 << S5P_SROM_BCX__TCOH__SHIFT) | - (0x6 << S5P_SROM_BCX__TACC__SHIFT) | - (0x1 << S5P_SROM_BCX__TCOS__SHIFT) | - (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1); -} - -static void __init smdkc210_map_io(void) -{ - s5p_init_io(NULL, 0, S5P_VA_CHIPID); - s3c24xx_init_clocks(24000000); - s3c24xx_init_uarts(smdkc210_uartcfgs, ARRAY_SIZE(smdkc210_uartcfgs)); -} - -static void __init smdkc210_machine_init(void) -{ - s3c_i2c1_set_platdata(NULL); - i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); - - smdkc210_smsc911x_init(); - - s3c_sdhci0_set_platdata(&smdkc210_hsmmc0_pdata); - s3c_sdhci1_set_platdata(&smdkc210_hsmmc1_pdata); - s3c_sdhci2_set_platdata(&smdkc210_hsmmc2_pdata); - s3c_sdhci3_set_platdata(&smdkc210_hsmmc3_pdata); - - platform_add_devices(smdkc210_devices, ARRAY_SIZE(smdkc210_devices)); -} - -MACHINE_START(SMDKC210, "SMDKC210") - /* Maintainer: Kukjin Kim */ - .boot_params = S5P_PA_SDRAM + 0x100, - .init_irq = s5pv310_init_irq, - .map_io = smdkc210_map_io, - .init_machine = smdkc210_machine_init, - .timer = &s5pv310_timer, -MACHINE_END diff --git a/arch/arm/mach-s5pv310/mach-smdkv310.c b/arch/arm/mach-s5pv310/mach-smdkv310.c deleted file mode 100644 index b1cddbf3c61..00000000000 --- a/arch/arm/mach-s5pv310/mach-smdkv310.c +++ /dev/null @@ -1,224 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/mach-smdkv310.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -/* Following are default values for UCON, ULCON and UFCON UART registers */ -#define SMDKV310_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define SMDKV310_ULCON_DEFAULT S3C2410_LCON_CS8 - -#define SMDKV310_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S5PV210_UFCON_TXTRIG4 | \ - S5PV210_UFCON_RXTRIG4) - -static struct s3c2410_uartcfg smdkv310_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = SMDKV310_UCON_DEFAULT, - .ulcon = SMDKV310_ULCON_DEFAULT, - .ufcon = SMDKV310_UFCON_DEFAULT, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = SMDKV310_UCON_DEFAULT, - .ulcon = SMDKV310_ULCON_DEFAULT, - .ufcon = SMDKV310_UFCON_DEFAULT, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = SMDKV310_UCON_DEFAULT, - .ulcon = SMDKV310_ULCON_DEFAULT, - .ufcon = SMDKV310_UFCON_DEFAULT, - }, - [3] = { - .hwport = 3, - .flags = 0, - .ucon = SMDKV310_UCON_DEFAULT, - .ulcon = SMDKV310_ULCON_DEFAULT, - .ufcon = SMDKV310_UFCON_DEFAULT, - }, -}; - -static struct s3c_sdhci_platdata smdkv310_hsmmc0_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = S5PV310_GPK0(2), - .ext_cd_gpio_invert = 1, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, -#ifdef CONFIG_S5PV310_SDHCI_CH0_8BIT - .max_width = 8, - .host_caps = MMC_CAP_8_BIT_DATA, -#endif -}; - -static struct s3c_sdhci_platdata smdkv310_hsmmc1_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = S5PV310_GPK0(2), - .ext_cd_gpio_invert = 1, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, -}; - -static struct s3c_sdhci_platdata smdkv310_hsmmc2_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = S5PV310_GPK2(2), - .ext_cd_gpio_invert = 1, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, -#ifdef CONFIG_S5PV310_SDHCI_CH2_8BIT - .max_width = 8, - .host_caps = MMC_CAP_8_BIT_DATA, -#endif -}; - -static struct s3c_sdhci_platdata smdkv310_hsmmc3_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = S5PV310_GPK2(2), - .ext_cd_gpio_invert = 1, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, -}; - -static struct resource smdkv310_smsc911x_resources[] = { - [0] = { - .start = S5PV310_PA_SROM_BANK(1), - .end = S5PV310_PA_SROM_BANK(1) + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_EINT(5), - .end = IRQ_EINT(5), - .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, - }, -}; - -static struct smsc911x_platform_config smsc9215_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, - .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, - .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY, - .phy_interface = PHY_INTERFACE_MODE_MII, - .mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67}, -}; - -static struct platform_device smdkv310_smsc911x = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(smdkv310_smsc911x_resources), - .resource = smdkv310_smsc911x_resources, - .dev = { - .platform_data = &smsc9215_config, - }, -}; - -static struct i2c_board_info i2c_devs1[] __initdata = { - {I2C_BOARD_INFO("wm8994", 0x1a),}, -}; - -static struct platform_device *smdkv310_devices[] __initdata = { - &s3c_device_hsmmc0, - &s3c_device_hsmmc1, - &s3c_device_hsmmc2, - &s3c_device_hsmmc3, - &s3c_device_i2c1, - &s3c_device_rtc, - &s3c_device_wdt, - &s5pv310_device_ac97, - &s5pv310_device_i2s0, - &s5pv310_device_pd[PD_MFC], - &s5pv310_device_pd[PD_G3D], - &s5pv310_device_pd[PD_LCD0], - &s5pv310_device_pd[PD_LCD1], - &s5pv310_device_pd[PD_CAM], - &s5pv310_device_pd[PD_TV], - &s5pv310_device_pd[PD_GPS], - &s5pv310_device_sysmmu, - &samsung_asoc_dma, - &smdkv310_smsc911x, -}; - -static void __init smdkv310_smsc911x_init(void) -{ - u32 cs1; - - /* configure nCS1 width to 16 bits */ - cs1 = __raw_readl(S5P_SROM_BW) & - ~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT); - cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) | - (1 << S5P_SROM_BW__WAITENABLE__SHIFT) | - (1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) << - S5P_SROM_BW__NCS1__SHIFT; - __raw_writel(cs1, S5P_SROM_BW); - - /* set timing for nCS1 suitable for ethernet chip */ - __raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) | - (0x9 << S5P_SROM_BCX__TACP__SHIFT) | - (0xc << S5P_SROM_BCX__TCAH__SHIFT) | - (0x1 << S5P_SROM_BCX__TCOH__SHIFT) | - (0x6 << S5P_SROM_BCX__TACC__SHIFT) | - (0x1 << S5P_SROM_BCX__TCOS__SHIFT) | - (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1); -} - -static void __init smdkv310_map_io(void) -{ - s5p_init_io(NULL, 0, S5P_VA_CHIPID); - s3c24xx_init_clocks(24000000); - s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs)); -} - -static void __init smdkv310_machine_init(void) -{ - s3c_i2c1_set_platdata(NULL); - i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); - - smdkv310_smsc911x_init(); - - s3c_sdhci0_set_platdata(&smdkv310_hsmmc0_pdata); - s3c_sdhci1_set_platdata(&smdkv310_hsmmc1_pdata); - s3c_sdhci2_set_platdata(&smdkv310_hsmmc2_pdata); - s3c_sdhci3_set_platdata(&smdkv310_hsmmc3_pdata); - - platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices)); -} - -MACHINE_START(SMDKV310, "SMDKV310") - /* Maintainer: Kukjin Kim */ - /* Maintainer: Changhwan Youn */ - .boot_params = S5P_PA_SDRAM + 0x100, - .init_irq = s5pv310_init_irq, - .map_io = smdkv310_map_io, - .init_machine = smdkv310_machine_init, - .timer = &s5pv310_timer, -MACHINE_END diff --git a/arch/arm/mach-s5pv310/mach-universal_c210.c b/arch/arm/mach-s5pv310/mach-universal_c210.c deleted file mode 100644 index 36bc3cf825e..00000000000 --- a/arch/arm/mach-s5pv310/mach-universal_c210.c +++ /dev/null @@ -1,237 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/mach-universal_c210.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include -#include -#include -#include - -#include - -/* Following are default values for UCON, ULCON and UFCON UART registers */ -#define UNIVERSAL_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define UNIVERSAL_ULCON_DEFAULT S3C2410_LCON_CS8 - -#define UNIVERSAL_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S5PV210_UFCON_TXTRIG256 | \ - S5PV210_UFCON_RXTRIG256) - -static struct s3c2410_uartcfg universal_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .ucon = UNIVERSAL_UCON_DEFAULT, - .ulcon = UNIVERSAL_ULCON_DEFAULT, - .ufcon = UNIVERSAL_UFCON_DEFAULT, - }, - [1] = { - .hwport = 1, - .ucon = UNIVERSAL_UCON_DEFAULT, - .ulcon = UNIVERSAL_ULCON_DEFAULT, - .ufcon = UNIVERSAL_UFCON_DEFAULT, - }, - [2] = { - .hwport = 2, - .ucon = UNIVERSAL_UCON_DEFAULT, - .ulcon = UNIVERSAL_ULCON_DEFAULT, - .ufcon = UNIVERSAL_UFCON_DEFAULT, - }, - [3] = { - .hwport = 3, - .ucon = UNIVERSAL_UCON_DEFAULT, - .ulcon = UNIVERSAL_ULCON_DEFAULT, - .ufcon = UNIVERSAL_UFCON_DEFAULT, - }, -}; - -static struct gpio_keys_button universal_gpio_keys_tables[] = { - { - .code = KEY_VOLUMEUP, - .gpio = S5PV310_GPX2(0), /* XEINT16 */ - .desc = "gpio-keys: KEY_VOLUMEUP", - .type = EV_KEY, - .active_low = 1, - .debounce_interval = 1, - }, { - .code = KEY_VOLUMEDOWN, - .gpio = S5PV310_GPX2(1), /* XEINT17 */ - .desc = "gpio-keys: KEY_VOLUMEDOWN", - .type = EV_KEY, - .active_low = 1, - .debounce_interval = 1, - }, { - .code = KEY_CONFIG, - .gpio = S5PV310_GPX2(2), /* XEINT18 */ - .desc = "gpio-keys: KEY_CONFIG", - .type = EV_KEY, - .active_low = 1, - .debounce_interval = 1, - }, { - .code = KEY_CAMERA, - .gpio = S5PV310_GPX2(3), /* XEINT19 */ - .desc = "gpio-keys: KEY_CAMERA", - .type = EV_KEY, - .active_low = 1, - .debounce_interval = 1, - }, { - .code = KEY_OK, - .gpio = S5PV310_GPX3(5), /* XEINT29 */ - .desc = "gpio-keys: KEY_OK", - .type = EV_KEY, - .active_low = 1, - .debounce_interval = 1, - }, -}; - -static struct gpio_keys_platform_data universal_gpio_keys_data = { - .buttons = universal_gpio_keys_tables, - .nbuttons = ARRAY_SIZE(universal_gpio_keys_tables), -}; - -static struct platform_device universal_gpio_keys = { - .name = "gpio-keys", - .dev = { - .platform_data = &universal_gpio_keys_data, - }, -}; - -/* eMMC */ -static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = { - .max_width = 8, - .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | - MMC_CAP_DISABLE), - .cd_type = S3C_SDHCI_CD_PERMANENT, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, -}; - -static struct regulator_consumer_supply mmc0_supplies[] = { - REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"), -}; - -static struct regulator_init_data mmc0_fixed_voltage_init_data = { - .constraints = { - .name = "VMEM_VDD_2.8V", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(mmc0_supplies), - .consumer_supplies = mmc0_supplies, -}; - -static struct fixed_voltage_config mmc0_fixed_voltage_config = { - .supply_name = "MASSMEMORY_EN", - .microvolts = 2800000, - .gpio = S5PV310_GPE1(3), - .enable_high = true, - .init_data = &mmc0_fixed_voltage_init_data, -}; - -static struct platform_device mmc0_fixed_voltage = { - .name = "reg-fixed-voltage", - .id = 0, - .dev = { - .platform_data = &mmc0_fixed_voltage_config, - }, -}; - -/* SD */ -static struct s3c_sdhci_platdata universal_hsmmc2_data __initdata = { - .max_width = 4, - .host_caps = MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | - MMC_CAP_DISABLE, - .ext_cd_gpio = S5PV310_GPX3(4), /* XEINT_28 */ - .ext_cd_gpio_invert = 1, - .cd_type = S3C_SDHCI_CD_GPIO, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, -}; - -/* WiFi */ -static struct s3c_sdhci_platdata universal_hsmmc3_data __initdata = { - .max_width = 4, - .host_caps = MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | - MMC_CAP_DISABLE, - .cd_type = S3C_SDHCI_CD_EXTERNAL, -}; - -static void __init universal_sdhci_init(void) -{ - s3c_sdhci0_set_platdata(&universal_hsmmc0_data); - s3c_sdhci2_set_platdata(&universal_hsmmc2_data); - s3c_sdhci3_set_platdata(&universal_hsmmc3_data); -} - -/* I2C0 */ -static struct i2c_board_info i2c0_devs[] __initdata = { - /* Camera, To be updated */ -}; - -/* I2C1 */ -static struct i2c_board_info i2c1_devs[] __initdata = { - /* Gyro, To be updated */ -}; - -static struct platform_device *universal_devices[] __initdata = { - /* Samsung Platform Devices */ - &mmc0_fixed_voltage, - &s3c_device_hsmmc0, - &s3c_device_hsmmc2, - &s3c_device_hsmmc3, - - /* Universal Devices */ - &universal_gpio_keys, - &s5p_device_onenand, -}; - -static void __init universal_map_io(void) -{ - s5p_init_io(NULL, 0, S5P_VA_CHIPID); - s3c24xx_init_clocks(24000000); - s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs)); -} - -static void __init universal_machine_init(void) -{ - universal_sdhci_init(); - - i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs)); - i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs)); - - /* Last */ - platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices)); -} - -MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210") - /* Maintainer: Kyungmin Park */ - .boot_params = S5P_PA_SDRAM + 0x100, - .init_irq = s5pv310_init_irq, - .map_io = universal_map_io, - .init_machine = universal_machine_init, - .timer = &s5pv310_timer, -MACHINE_END -- cgit v1.2.3-18-g5258 From 10606aadb046d008c88d1a99b309357ca33d590e Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Mon, 14 Feb 2011 15:05:27 +0900 Subject: ARM: EXYNOS4: Update Kconfig and Makefile for the new ARCH_EXYNOS4 This patch changes the Kconfig and Makefile for the new ARCH_EXYNOS4. It also updates arch/arm/Kconfig, Makeifile and arch/arm/mm/Kconfig to include support for the new ARCH_EXYNOS4. Cc: Russell King Signed-off-by: Kukjin Kim --- arch/arm/Kconfig | 12 +-- arch/arm/Makefile | 2 +- arch/arm/mach-exynos4/Kconfig | 146 ++++++++++++++++++++++++++++++++++ arch/arm/mach-exynos4/Makefile | 43 ++++++++++ arch/arm/mach-exynos4/Makefile.boot | 2 + arch/arm/mach-s5pv310/Kconfig | 151 ------------------------------------ arch/arm/mach-s5pv310/Makefile | 43 ---------- arch/arm/mach-s5pv310/Makefile.boot | 2 - arch/arm/mm/Kconfig | 2 +- arch/arm/plat-s5p/Kconfig | 8 +- 10 files changed, 203 insertions(+), 208 deletions(-) create mode 100644 arch/arm/mach-exynos4/Kconfig create mode 100644 arch/arm/mach-exynos4/Makefile create mode 100644 arch/arm/mach-exynos4/Makefile.boot delete mode 100644 arch/arm/mach-s5pv310/Kconfig delete mode 100644 arch/arm/mach-s5pv310/Makefile delete mode 100644 arch/arm/mach-s5pv310/Makefile.boot (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 166efa2a19c..ec3bf985613 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -760,8 +760,8 @@ config ARCH_S5PV210 help Samsung S5PV210/S5PC110 series based systems -config ARCH_S5PV310 - bool "Samsung S5PV310/S5PC210" +config ARCH_EXYNOS4 + bool "Samsung EXYNOS4" select CPU_V7 select ARCH_SPARSEMEM_ENABLE select GENERIC_GPIO @@ -772,7 +772,7 @@ config ARCH_S5PV310 select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG help - Samsung S5PV310 series based systems + Samsung EXYNOS4 series based systems config ARCH_SHARK bool "Shark" @@ -991,7 +991,7 @@ source "arch/arm/mach-s5pc100/Kconfig" source "arch/arm/mach-s5pv210/Kconfig" -source "arch/arm/mach-s5pv310/Kconfig" +source "arch/arm/mach-exynos4/Kconfig" source "arch/arm/mach-shmobile/Kconfig" @@ -1278,7 +1278,7 @@ config SMP depends on GENERIC_CLOCKEVENTS depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \ MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \ - ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \ + ARCH_EXYNOS4 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \ ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE select USE_GENERIC_SMP_HELPERS select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP @@ -1378,7 +1378,7 @@ source kernel/Kconfig.preempt config HZ int default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \ - ARCH_S5P6442 || ARCH_S5PV210 || ARCH_S5PV310 + ARCH_S5P6442 || ARCH_S5PV210 || ARCH_EXYNOS4 default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER default AT91_TIMER_HZ if ARCH_AT91 default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 6f7b29294c8..40aa0225877 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -178,7 +178,7 @@ machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0 machine-$(CONFIG_ARCH_S5P6442) := s5p6442 machine-$(CONFIG_ARCH_S5PC100) := s5pc100 machine-$(CONFIG_ARCH_S5PV210) := s5pv210 -machine-$(CONFIG_ARCH_S5PV310) := s5pv310 +machine-$(CONFIG_ARCH_EXYNOS4) := exynos4 machine-$(CONFIG_ARCH_SA1100) := sa1100 machine-$(CONFIG_ARCH_SHARK) := shark machine-$(CONFIG_ARCH_SHMOBILE) := shmobile diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig new file mode 100644 index 00000000000..ad038401290 --- /dev/null +++ b/arch/arm/mach-exynos4/Kconfig @@ -0,0 +1,146 @@ +# arch/arm/mach-exynos4/Kconfig +# +# Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. +# http://www.samsung.com/ +# +# Licensed under GPLv2 + +# Configuration options for the EXYNOS4 + +if ARCH_EXYNOS4 + +config CPU_EXYNOS4210 + bool + select S3C_PL330_DMA + help + Enable EXYNOS4210 CPU support + +config EXYNOS4_DEV_PD + bool + help + Compile in platform device definitions for Power Domain + +config EXYNOS4_DEV_SYSMMU + bool + help + Common setup code for SYSTEM MMU in EXYNOS4 + +config EXYNOS4_SETUP_I2C1 + bool + help + Common setup code for i2c bus 1. + +config EXYNOS4_SETUP_I2C2 + bool + help + Common setup code for i2c bus 2. + +config EXYNOS4_SETUP_I2C3 + bool + help + Common setup code for i2c bus 3. + +config EXYNOS4_SETUP_I2C4 + bool + help + Common setup code for i2c bus 4. + +config EXYNOS4_SETUP_I2C5 + bool + help + Common setup code for i2c bus 5. + +config EXYNOS4_SETUP_I2C6 + bool + help + Common setup code for i2c bus 6. + +config EXYNOS4_SETUP_I2C7 + bool + help + Common setup code for i2c bus 7. + +config EXYNOS4_SETUP_SDHCI + bool + select EXYNOS4_SETUP_SDHCI_GPIO + help + Internal helper functions for EXYNOS4 based SDHCI systems. + +config EXYNOS4_SETUP_SDHCI_GPIO + bool + help + Common setup code for SDHCI gpio. + +# machine support + +menu "EXYNOS4 Machines" + +config MACH_SMDKC210 + bool "SMDKC210" + select CPU_EXYNOS4210 + select S3C_DEV_RTC + select S3C_DEV_WDT + select S3C_DEV_I2C1 + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C_DEV_HSMMC2 + select S3C_DEV_HSMMC3 + select EXYNOS4_DEV_PD + select EXYNOS4_DEV_SYSMMU + select EXYNOS4_SETUP_I2C1 + select EXYNOS4_SETUP_SDHCI + help + Machine support for Samsung SMDKC210 + +config MACH_SMDKV310 + bool "SMDKV310" + select CPU_EXYNOS4210 + select S3C_DEV_RTC + select S3C_DEV_WDT + select S3C_DEV_I2C1 + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C_DEV_HSMMC2 + select S3C_DEV_HSMMC3 + select EXYNOS4_DEV_PD + select EXYNOS4_DEV_SYSMMU + select EXYNOS4_SETUP_I2C1 + select EXYNOS4_SETUP_SDHCI + help + Machine support for Samsung SMDKV310 + +config MACH_UNIVERSAL_C210 + bool "Mobile UNIVERSAL_C210 Board" + select CPU_EXYNOS4210 + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC2 + select S3C_DEV_HSMMC3 + select S3C_DEV_I2C1 + select S5P_DEV_ONENAND + select EXYNOS4_SETUP_I2C1 + select EXYNOS4_SETUP_SDHCI + help + Machine support for Samsung Mobile Universal S5PC210 Reference + Board. + +endmenu + +comment "Configuration for HSMMC bus width" + +menu "Use 8-bit bus width" + +config EXYNOS4_SDHCI_CH0_8BIT + bool "Channel 0 with 8-bit bus" + help + Support HSMMC Channel 0 8-bit bus. + If selected, Channel 1 is disabled. + +config EXYNOS4_SDHCI_CH2_8BIT + bool "Channel 2 with 8-bit bus" + help + Support HSMMC Channel 2 8-bit bus. + If selected, Channel 3 is disabled. + +endmenu + +endif diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile new file mode 100644 index 00000000000..05582353323 --- /dev/null +++ b/arch/arm/mach-exynos4/Makefile @@ -0,0 +1,43 @@ +# arch/arm/mach-exynos4/Makefile +# +# Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. +# http://www.samsung.com/ +# +# Licensed under GPLv2 + +obj-y := +obj-m := +obj-n := +obj- := + +# Core support for EXYNOS4 system + +obj-$(CONFIG_CPU_EXYNOS4210) += cpu.o init.o clock.o irq-combiner.o +obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o time.o gpiolib.o irq-eint.o dma.o +obj-$(CONFIG_CPU_FREQ) += cpufreq.o + +obj-$(CONFIG_SMP) += platsmp.o headsmp.o +obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o +obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o + +# machine support + +obj-$(CONFIG_MACH_SMDKC210) += mach-smdkc210.o +obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o +obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o + +# device support + +obj-y += dev-audio.o +obj-$(CONFIG_EXYNOS4_DEV_PD) += dev-pd.o +obj-$(CONFIG_EXYNOS4_DEV_SYSMMU) += dev-sysmmu.o + +obj-$(CONFIG_EXYNOS4_SETUP_I2C1) += setup-i2c1.o +obj-$(CONFIG_EXYNOS4_SETUP_I2C2) += setup-i2c2.o +obj-$(CONFIG_EXYNOS4_SETUP_I2C3) += setup-i2c3.o +obj-$(CONFIG_EXYNOS4_SETUP_I2C4) += setup-i2c4.o +obj-$(CONFIG_EXYNOS4_SETUP_I2C5) += setup-i2c5.o +obj-$(CONFIG_EXYNOS4_SETUP_I2C6) += setup-i2c6.o +obj-$(CONFIG_EXYNOS4_SETUP_I2C7) += setup-i2c7.o +obj-$(CONFIG_EXYNOS4_SETUP_SDHCI) += setup-sdhci.o +obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o diff --git a/arch/arm/mach-exynos4/Makefile.boot b/arch/arm/mach-exynos4/Makefile.boot new file mode 100644 index 00000000000..d65956ffb43 --- /dev/null +++ b/arch/arm/mach-exynos4/Makefile.boot @@ -0,0 +1,2 @@ + zreladdr-y := 0x40008000 +params_phys-y := 0x40000100 diff --git a/arch/arm/mach-s5pv310/Kconfig b/arch/arm/mach-s5pv310/Kconfig deleted file mode 100644 index b2a9acc5185..00000000000 --- a/arch/arm/mach-s5pv310/Kconfig +++ /dev/null @@ -1,151 +0,0 @@ -# arch/arm/mach-s5pv310/Kconfig -# -# Copyright (c) 2010 Samsung Electronics Co., Ltd. -# http://www.samsung.com/ -# -# Licensed under GPLv2 - -# Configuration options for the S5PV310 - -if ARCH_S5PV310 - -config CPU_S5PV310 - bool - select S3C_PL330_DMA - help - Enable S5PV310 CPU support - -config S5PV310_DEV_PD - bool - help - Compile in platform device definitions for Power Domain - -config S5PV310_SETUP_I2C1 - bool - help - Common setup code for i2c bus 1. - -config S5PV310_SETUP_I2C2 - bool - help - Common setup code for i2c bus 2. - -config S5PV310_SETUP_I2C3 - bool - help - Common setup code for i2c bus 3. - -config S5PV310_SETUP_I2C4 - bool - help - Common setup code for i2c bus 4. - -config S5PV310_SETUP_I2C5 - bool - help - Common setup code for i2c bus 5. - -config S5PV310_SETUP_I2C6 - bool - help - Common setup code for i2c bus 6. - -config S5PV310_SETUP_I2C7 - bool - help - Common setup code for i2c bus 7. - -config S5PV310_SETUP_SDHCI - bool - select S5PV310_SETUP_SDHCI_GPIO - help - Internal helper functions for S5PV310 based SDHCI systems. - -config S5PV310_SETUP_SDHCI_GPIO - bool - help - Common setup code for SDHCI gpio. - -config S5PV310_DEV_SYSMMU - bool - help - Common setup code for SYSTEM MMU in S5PV310 - -# machine support - -menu "S5PC210 Machines" - -config MACH_SMDKC210 - bool "SMDKC210" - select CPU_S5PV310 - select S3C_DEV_RTC - select S3C_DEV_WDT - select S3C_DEV_I2C1 - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_HSMMC2 - select S3C_DEV_HSMMC3 - select S5PV310_DEV_PD - select S5PV310_SETUP_I2C1 - select S5PV310_SETUP_SDHCI - select S5PV310_DEV_SYSMMU - help - Machine support for Samsung SMDKC210 - S5PC210(MCP) is one of package option of S5PV310 - -config MACH_UNIVERSAL_C210 - bool "Mobile UNIVERSAL_C210 Board" - select CPU_S5PV310 - select S5P_DEV_ONENAND - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC2 - select S3C_DEV_HSMMC3 - select S5PV310_SETUP_SDHCI - select S3C_DEV_I2C1 - select S5PV310_SETUP_I2C1 - help - Machine support for Samsung Mobile Universal S5PC210 Reference - Board. S5PC210(MCP) is one of package option of S5PV310 - -endmenu - -menu "S5PV310 Machines" - -config MACH_SMDKV310 - bool "SMDKV310" - select CPU_S5PV310 - select S3C_DEV_RTC - select S3C_DEV_WDT - select S3C_DEV_I2C1 - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_HSMMC2 - select S3C_DEV_HSMMC3 - select S5PV310_DEV_PD - select S5PV310_DEV_SYSMMU - select S5PV310_SETUP_I2C1 - select S5PV310_SETUP_SDHCI - help - Machine support for Samsung SMDKV310 - -endmenu - -comment "Configuration for HSMMC bus width" - -menu "Use 8-bit bus width" - -config S5PV310_SDHCI_CH0_8BIT - bool "Channel 0 with 8-bit bus" - help - Support HSMMC Channel 0 8-bit bus. - If selected, Channel 1 is disabled. - -config S5PV310_SDHCI_CH2_8BIT - bool "Channel 2 with 8-bit bus" - help - Support HSMMC Channel 2 8-bit bus. - If selected, Channel 3 is disabled. - -endmenu - -endif diff --git a/arch/arm/mach-s5pv310/Makefile b/arch/arm/mach-s5pv310/Makefile deleted file mode 100644 index 036fb383b83..00000000000 --- a/arch/arm/mach-s5pv310/Makefile +++ /dev/null @@ -1,43 +0,0 @@ -# arch/arm/mach-s5pv310/Makefile -# -# Copyright (c) 2010 Samsung Electronics Co., Ltd. -# http://www.samsung.com/ -# -# Licensed under GPLv2 - -obj-y := -obj-m := -obj-n := -obj- := - -# Core support for S5PV310 system - -obj-$(CONFIG_CPU_S5PV310) += cpu.o init.o clock.o irq-combiner.o -obj-$(CONFIG_CPU_S5PV310) += setup-i2c0.o time.o gpiolib.o irq-eint.o dma.o -obj-$(CONFIG_CPU_FREQ) += cpufreq.o - -obj-$(CONFIG_SMP) += platsmp.o headsmp.o -obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o -obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o - -# machine support - -obj-$(CONFIG_MACH_SMDKC210) += mach-smdkc210.o -obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o -obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o - -# device support - -obj-y += dev-audio.o -obj-$(CONFIG_S5PV310_DEV_PD) += dev-pd.o -obj-$(CONFIG_S5PV310_DEV_SYSMMU) += dev-sysmmu.o - -obj-$(CONFIG_S5PV310_SETUP_I2C1) += setup-i2c1.o -obj-$(CONFIG_S5PV310_SETUP_I2C2) += setup-i2c2.o -obj-$(CONFIG_S5PV310_SETUP_I2C3) += setup-i2c3.o -obj-$(CONFIG_S5PV310_SETUP_I2C4) += setup-i2c4.o -obj-$(CONFIG_S5PV310_SETUP_I2C5) += setup-i2c5.o -obj-$(CONFIG_S5PV310_SETUP_I2C6) += setup-i2c6.o -obj-$(CONFIG_S5PV310_SETUP_I2C7) += setup-i2c7.o -obj-$(CONFIG_S5PV310_SETUP_SDHCI) += setup-sdhci.o -obj-$(CONFIG_S5PV310_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o diff --git a/arch/arm/mach-s5pv310/Makefile.boot b/arch/arm/mach-s5pv310/Makefile.boot deleted file mode 100644 index d65956ffb43..00000000000 --- a/arch/arm/mach-s5pv310/Makefile.boot +++ /dev/null @@ -1,2 +0,0 @@ - zreladdr-y := 0x40008000 -params_phys-y := 0x40000100 diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index e4509bae8fc..0f59e54e939 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -812,7 +812,7 @@ config CACHE_L2X0 bool "Enable the L2x0 outer cache controller" depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \ REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || \ - ARCH_NOMADIK || ARCH_OMAP4 || ARCH_S5PV310 || ARCH_TEGRA || \ + ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \ ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE default y select OUTER_CACHE diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index 557f8c507f6..6390ac728b3 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -7,10 +7,10 @@ config PLAT_S5P bool - depends on (ARCH_S5P64X0 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5PV310) + depends on (ARCH_S5P64X0 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS4) default y - select ARM_VIC if !ARCH_S5PV310 - select ARM_GIC if ARCH_S5PV310 + select ARM_VIC if !ARCH_EXYNOS4 + select ARM_GIC if ARCH_EXYNOS4 select NO_IOPORT select ARCH_REQUIRE_GPIOLIB select S3C_GPIO_TRACK @@ -41,7 +41,7 @@ comment "System MMU" config S5P_SYSTEM_MMU bool "S5P SYSTEM MMU" - depends on ARCH_S5PV310 + depends on ARCH_EXYNOS4 help Say Y here if you want to enable System MMU -- cgit v1.2.3-18-g5258 From a1fe724a47e4a06bb022cac400f181eeac49583d Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Mon, 14 Feb 2011 16:59:54 +0900 Subject: ARM: exynos4_defconfig: Add defconfig for EXYNOS4 Cc: Russell King Signed-off-by: Kukjin Kim --- arch/arm/configs/exynos4_defconfig | 70 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 70 insertions(+) create mode 100644 arch/arm/configs/exynos4_defconfig (limited to 'arch') diff --git a/arch/arm/configs/exynos4_defconfig b/arch/arm/configs/exynos4_defconfig new file mode 100644 index 00000000000..2ffba24d2e2 --- /dev/null +++ b/arch/arm/configs/exynos4_defconfig @@ -0,0 +1,70 @@ +CONFIG_EXPERIMENTAL=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_KALLSYMS_ALL=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_ARCH_EXYNOS4=y +CONFIG_S3C_LOWLEVEL_UART_PORT=1 +CONFIG_MACH_SMDKC210=y +CONFIG_MACH_SMDKV310=y +CONFIG_MACH_UNIVERSAL_C210=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_HOTPLUG_CPU=y +CONFIG_PREEMPT=y +CONFIG_AEABI=y +CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M" +CONFIG_VFP=y +CONFIG_NEON=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_SG=y +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_SAMSUNG=y +CONFIG_SERIAL_SAMSUNG_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_I2C=y +# CONFIG_HWMON is not set +# CONFIG_MFD_SUPPORT is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_EXT2_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_CRAMFS=y +CONFIG_ROMFS_FS=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_BSD_DISKLABEL=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +CONFIG_DEBUG_SPINLOCK_SLEEP=y +CONFIG_DEBUG_INFO=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +CONFIG_EARLY_PRINTK=y +CONFIG_DEBUG_S3C_UART=1 +CONFIG_CRC_CCITT=y -- cgit v1.2.3-18-g5258 From fbe99959d1db85222829a64d869dcab704ac7ec8 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 22 Feb 2011 11:10:08 +0100 Subject: x86-64, NUMA: Prepare numa_emulation() for moving NUMA emulation into a separate file Update numa_emulation() such that, it - takes @numa_meminfo and @numa_dist_cnt instead of directly referencing the global variables. - copies the distance table by iterating each distance with node_distance() instead of memcpy'ing the distance table. - tests emu_cmdline to determine whether emulation is requested and fills emu_nid_to_phys[] with identity mapping if emulation is not used. This allows the caller to call numa_emulation() unconditionally and makes return value unncessary. - defines dummy version if CONFIG_NUMA_EMU is disabled. This patch doesn't introduce any behavior change. Signed-off-by: Tejun Heo Cc: Yinghai Lu Cc: Ingo Molnar --- arch/x86/mm/numa_64.c | 56 ++++++++++++++++++++++++++++++--------------------- 1 file changed, 33 insertions(+), 23 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index 6e4ee96d1b1..980d51458c4 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -789,17 +789,20 @@ static int __init split_nodes_size_interleave(struct numa_meminfo *ei, * Sets up the system RAM area from start_pfn to last_pfn according to the * numa=fake command-line option. */ -static bool __init numa_emulation(void) +static void __init numa_emulation(struct numa_meminfo *numa_meminfo, + int numa_dist_cnt) { static struct numa_meminfo ei __initdata; static struct numa_meminfo pi __initdata; const u64 max_addr = max_pfn << PAGE_SHIFT; - int phys_dist_cnt = numa_distance_cnt; u8 *phys_dist = NULL; int i, j, ret; + if (!emu_cmdline) + goto no_emu; + memset(&ei, 0, sizeof(ei)); - pi = numa_meminfo; + pi = *numa_meminfo; for (i = 0; i < MAX_NUMNODES; i++) emu_nid_to_phys[i] = NUMA_NO_NODE; @@ -822,19 +825,19 @@ static bool __init numa_emulation(void) } if (ret < 0) - return false; + goto no_emu; if (numa_cleanup_meminfo(&ei) < 0) { pr_warning("NUMA: Warning: constructed meminfo invalid, disabling emulation\n"); - return false; + goto no_emu; } /* * Copy the original distance table. It's temporary so no need to * reserve it. */ - if (phys_dist_cnt) { - size_t size = phys_dist_cnt * sizeof(numa_distance[0]); + if (numa_dist_cnt) { + size_t size = numa_dist_cnt * sizeof(phys_dist[0]); u64 phys; phys = memblock_find_in_range(0, @@ -842,14 +845,18 @@ static bool __init numa_emulation(void) size, PAGE_SIZE); if (phys == MEMBLOCK_ERROR) { pr_warning("NUMA: Warning: can't allocate copy of distance table, disabling emulation\n"); - return false; + goto no_emu; } phys_dist = __va(phys); - memcpy(phys_dist, numa_distance, size); + + for (i = 0; i < numa_dist_cnt; i++) + for (j = 0; j < numa_dist_cnt; j++) + phys_dist[i * numa_dist_cnt + j] = + node_distance(i, j); } /* commit */ - numa_meminfo = ei; + *numa_meminfo = ei; /* * Transform __apicid_to_node table to use emulated nids by @@ -878,18 +885,27 @@ static bool __init numa_emulation(void) int physj = emu_nid_to_phys[j]; int dist; - if (physi >= phys_dist_cnt || physj >= phys_dist_cnt) + if (physi >= numa_dist_cnt || physj >= numa_dist_cnt) dist = physi == physj ? LOCAL_DISTANCE : REMOTE_DISTANCE; else - dist = phys_dist[physi * phys_dist_cnt + physj]; + dist = phys_dist[physi * numa_dist_cnt + physj]; numa_set_distance(i, j, dist); } } - return true; + return; + +no_emu: + /* No emulation. Build identity emu_nid_to_phys[] for numa_add_cpu() */ + for (i = 0; i < ARRAY_SIZE(emu_nid_to_phys); i++) + emu_nid_to_phys[i] = i; } -#endif /* CONFIG_NUMA_EMU */ +#else /* CONFIG_NUMA_EMU */ +static inline void numa_emulation(struct numa_meminfo *numa_meminfo, + int numa_dist_cnt) +{ } +#endif /* CONFIG_NUMA_EMU */ static int __init dummy_numa_init(void) { @@ -937,15 +953,9 @@ void __init initmem_init(void) if (numa_cleanup_meminfo(&numa_meminfo) < 0) continue; -#ifdef CONFIG_NUMA_EMU - /* - * If requested, try emulation. If emulation is not used, - * build identity emu_nid_to_phys[] for numa_add_cpu() - */ - if (!emu_cmdline || !numa_emulation()) - for (j = 0; j < ARRAY_SIZE(emu_nid_to_phys); j++) - emu_nid_to_phys[j] = j; -#endif + + numa_emulation(&numa_meminfo, numa_distance_cnt); + if (numa_register_memblks(&numa_meminfo) < 0) continue; -- cgit v1.2.3-18-g5258 From b8ef9172b2aad7eeb1fcd37a9e632c7b24da1f64 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 22 Feb 2011 11:10:08 +0100 Subject: x86-64, NUMA: Move NUMA emulation into numa_emulation.c Create numa_emulation.c and move all NUMA emulation code there. The definitions of struct numa_memblk and numa_meminfo are moved to numa_64.h. Also, numa_remove_memblk_from(), numa_cleanup_meminfo(), numa_reset_distance() along with numa_emulation() are made global. - v2: Internal declarations moved to numa_internal.h as suggested by Yinghai. Signed-off-by: Tejun Heo Acked-by: Yinghai Lu Cc: Ingo Molnar --- arch/x86/mm/Makefile | 1 + arch/x86/mm/numa_64.c | 480 +------------------------------------------ arch/x86/mm/numa_emulation.c | 452 ++++++++++++++++++++++++++++++++++++++++ arch/x86/mm/numa_internal.h | 31 +++ 4 files changed, 488 insertions(+), 476 deletions(-) create mode 100644 arch/x86/mm/numa_emulation.c create mode 100644 arch/x86/mm/numa_internal.h (limited to 'arch') diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile index 09df2f9a3d6..3e608edf995 100644 --- a/arch/x86/mm/Makefile +++ b/arch/x86/mm/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_MMIOTRACE_TEST) += testmmiotrace.o obj-$(CONFIG_NUMA) += numa.o numa_$(BITS).o obj-$(CONFIG_AMD_NUMA) += amdtopology_64.o obj-$(CONFIG_ACPI_NUMA) += srat_$(BITS).o +obj-$(CONFIG_NUMA_EMU) += numa_emulation.o obj-$(CONFIG_HAVE_MEMBLOCK) += memblock.o diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index 980d51458c4..45a361b16a5 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -18,20 +18,10 @@ #include #include #include -#include #include #include -struct numa_memblk { - u64 start; - u64 end; - int nid; -}; - -struct numa_meminfo { - int nr_blks; - struct numa_memblk blk[NR_NODE_MEMBLKS]; -}; +#include "numa_internal.h" struct pglist_data *node_data[MAX_NUMNODES] __read_mostly; EXPORT_SYMBOL(node_data); @@ -215,7 +205,7 @@ static int __init numa_add_memblk_to(int nid, u64 start, u64 end, return 0; } -static void __init numa_remove_memblk_from(int idx, struct numa_meminfo *mi) +void __init numa_remove_memblk_from(int idx, struct numa_meminfo *mi) { mi->nr_blks--; memmove(&mi->blk[idx], &mi->blk[idx + 1], @@ -273,7 +263,7 @@ setup_node_bootmem(int nodeid, unsigned long start, unsigned long end) node_set_online(nodeid); } -static int __init numa_cleanup_meminfo(struct numa_meminfo *mi) +int __init numa_cleanup_meminfo(struct numa_meminfo *mi) { const u64 low = 0; const u64 high = (u64)max_pfn << PAGE_SHIFT; @@ -367,7 +357,7 @@ static void __init numa_nodemask_from_meminfo(nodemask_t *nodemask, * Reset distance table. The current table is freed. The next * numa_set_distance() call will create a new one. */ -static void __init numa_reset_distance(void) +void __init numa_reset_distance(void) { size_t size; @@ -525,388 +515,6 @@ static int __init numa_register_memblks(struct numa_meminfo *mi) return 0; } -#ifdef CONFIG_NUMA_EMU -/* Numa emulation */ -static int emu_nid_to_phys[MAX_NUMNODES] __cpuinitdata; -static char *emu_cmdline __initdata; - -void __init numa_emu_cmdline(char *str) -{ - emu_cmdline = str; -} - -static int __init emu_find_memblk_by_nid(int nid, const struct numa_meminfo *mi) -{ - int i; - - for (i = 0; i < mi->nr_blks; i++) - if (mi->blk[i].nid == nid) - return i; - return -ENOENT; -} - -/* - * Sets up nid to range from @start to @end. The return value is -errno if - * something went wrong, 0 otherwise. - */ -static int __init emu_setup_memblk(struct numa_meminfo *ei, - struct numa_meminfo *pi, - int nid, int phys_blk, u64 size) -{ - struct numa_memblk *eb = &ei->blk[ei->nr_blks]; - struct numa_memblk *pb = &pi->blk[phys_blk]; - - if (ei->nr_blks >= NR_NODE_MEMBLKS) { - pr_err("NUMA: Too many emulated memblks, failing emulation\n"); - return -EINVAL; - } - - ei->nr_blks++; - eb->start = pb->start; - eb->end = pb->start + size; - eb->nid = nid; - - if (emu_nid_to_phys[nid] == NUMA_NO_NODE) - emu_nid_to_phys[nid] = pb->nid; - - pb->start += size; - if (pb->start >= pb->end) { - WARN_ON_ONCE(pb->start > pb->end); - numa_remove_memblk_from(phys_blk, pi); - } - - printk(KERN_INFO "Faking node %d at %016Lx-%016Lx (%LuMB)\n", nid, - eb->start, eb->end, (eb->end - eb->start) >> 20); - return 0; -} - -/* - * Sets up nr_nodes fake nodes interleaved over physical nodes ranging from addr - * to max_addr. The return value is the number of nodes allocated. - */ -static int __init split_nodes_interleave(struct numa_meminfo *ei, - struct numa_meminfo *pi, - u64 addr, u64 max_addr, int nr_nodes) -{ - nodemask_t physnode_mask = NODE_MASK_NONE; - u64 size; - int big; - int nid = 0; - int i, ret; - - if (nr_nodes <= 0) - return -1; - if (nr_nodes > MAX_NUMNODES) { - pr_info("numa=fake=%d too large, reducing to %d\n", - nr_nodes, MAX_NUMNODES); - nr_nodes = MAX_NUMNODES; - } - - size = (max_addr - addr - memblock_x86_hole_size(addr, max_addr)) / nr_nodes; - /* - * Calculate the number of big nodes that can be allocated as a result - * of consolidating the remainder. - */ - big = ((size & ~FAKE_NODE_MIN_HASH_MASK) * nr_nodes) / - FAKE_NODE_MIN_SIZE; - - size &= FAKE_NODE_MIN_HASH_MASK; - if (!size) { - pr_err("Not enough memory for each node. " - "NUMA emulation disabled.\n"); - return -1; - } - - for (i = 0; i < pi->nr_blks; i++) - node_set(pi->blk[i].nid, physnode_mask); - - /* - * Continue to fill physical nodes with fake nodes until there is no - * memory left on any of them. - */ - while (nodes_weight(physnode_mask)) { - for_each_node_mask(i, physnode_mask) { - u64 dma32_end = PFN_PHYS(MAX_DMA32_PFN); - u64 start, limit, end; - int phys_blk; - - phys_blk = emu_find_memblk_by_nid(i, pi); - if (phys_blk < 0) { - node_clear(i, physnode_mask); - continue; - } - start = pi->blk[phys_blk].start; - limit = pi->blk[phys_blk].end; - end = start + size; - - if (nid < big) - end += FAKE_NODE_MIN_SIZE; - - /* - * Continue to add memory to this fake node if its - * non-reserved memory is less than the per-node size. - */ - while (end - start - - memblock_x86_hole_size(start, end) < size) { - end += FAKE_NODE_MIN_SIZE; - if (end > limit) { - end = limit; - break; - } - } - - /* - * If there won't be at least FAKE_NODE_MIN_SIZE of - * non-reserved memory in ZONE_DMA32 for the next node, - * this one must extend to the boundary. - */ - if (end < dma32_end && dma32_end - end - - memblock_x86_hole_size(end, dma32_end) < FAKE_NODE_MIN_SIZE) - end = dma32_end; - - /* - * If there won't be enough non-reserved memory for the - * next node, this one must extend to the end of the - * physical node. - */ - if (limit - end - - memblock_x86_hole_size(end, limit) < size) - end = limit; - - ret = emu_setup_memblk(ei, pi, nid++ % nr_nodes, - phys_blk, - min(end, limit) - start); - if (ret < 0) - return ret; - } - } - return 0; -} - -/* - * Returns the end address of a node so that there is at least `size' amount of - * non-reserved memory or `max_addr' is reached. - */ -static u64 __init find_end_of_node(u64 start, u64 max_addr, u64 size) -{ - u64 end = start + size; - - while (end - start - memblock_x86_hole_size(start, end) < size) { - end += FAKE_NODE_MIN_SIZE; - if (end > max_addr) { - end = max_addr; - break; - } - } - return end; -} - -/* - * Sets up fake nodes of `size' interleaved over physical nodes ranging from - * `addr' to `max_addr'. The return value is the number of nodes allocated. - */ -static int __init split_nodes_size_interleave(struct numa_meminfo *ei, - struct numa_meminfo *pi, - u64 addr, u64 max_addr, u64 size) -{ - nodemask_t physnode_mask = NODE_MASK_NONE; - u64 min_size; - int nid = 0; - int i, ret; - - if (!size) - return -1; - /* - * The limit on emulated nodes is MAX_NUMNODES, so the size per node is - * increased accordingly if the requested size is too small. This - * creates a uniform distribution of node sizes across the entire - * machine (but not necessarily over physical nodes). - */ - min_size = (max_addr - addr - memblock_x86_hole_size(addr, max_addr)) / - MAX_NUMNODES; - min_size = max(min_size, FAKE_NODE_MIN_SIZE); - if ((min_size & FAKE_NODE_MIN_HASH_MASK) < min_size) - min_size = (min_size + FAKE_NODE_MIN_SIZE) & - FAKE_NODE_MIN_HASH_MASK; - if (size < min_size) { - pr_err("Fake node size %LuMB too small, increasing to %LuMB\n", - size >> 20, min_size >> 20); - size = min_size; - } - size &= FAKE_NODE_MIN_HASH_MASK; - - for (i = 0; i < pi->nr_blks; i++) - node_set(pi->blk[i].nid, physnode_mask); - - /* - * Fill physical nodes with fake nodes of size until there is no memory - * left on any of them. - */ - while (nodes_weight(physnode_mask)) { - for_each_node_mask(i, physnode_mask) { - u64 dma32_end = MAX_DMA32_PFN << PAGE_SHIFT; - u64 start, limit, end; - int phys_blk; - - phys_blk = emu_find_memblk_by_nid(i, pi); - if (phys_blk < 0) { - node_clear(i, physnode_mask); - continue; - } - start = pi->blk[phys_blk].start; - limit = pi->blk[phys_blk].end; - - end = find_end_of_node(start, limit, size); - /* - * If there won't be at least FAKE_NODE_MIN_SIZE of - * non-reserved memory in ZONE_DMA32 for the next node, - * this one must extend to the boundary. - */ - if (end < dma32_end && dma32_end - end - - memblock_x86_hole_size(end, dma32_end) < FAKE_NODE_MIN_SIZE) - end = dma32_end; - - /* - * If there won't be enough non-reserved memory for the - * next node, this one must extend to the end of the - * physical node. - */ - if (limit - end - - memblock_x86_hole_size(end, limit) < size) - end = limit; - - ret = emu_setup_memblk(ei, pi, nid++ % MAX_NUMNODES, - phys_blk, - min(end, limit) - start); - if (ret < 0) - return ret; - } - } - return 0; -} - -/* - * Sets up the system RAM area from start_pfn to last_pfn according to the - * numa=fake command-line option. - */ -static void __init numa_emulation(struct numa_meminfo *numa_meminfo, - int numa_dist_cnt) -{ - static struct numa_meminfo ei __initdata; - static struct numa_meminfo pi __initdata; - const u64 max_addr = max_pfn << PAGE_SHIFT; - u8 *phys_dist = NULL; - int i, j, ret; - - if (!emu_cmdline) - goto no_emu; - - memset(&ei, 0, sizeof(ei)); - pi = *numa_meminfo; - - for (i = 0; i < MAX_NUMNODES; i++) - emu_nid_to_phys[i] = NUMA_NO_NODE; - - /* - * If the numa=fake command-line contains a 'M' or 'G', it represents - * the fixed node size. Otherwise, if it is just a single number N, - * split the system RAM into N fake nodes. - */ - if (strchr(emu_cmdline, 'M') || strchr(emu_cmdline, 'G')) { - u64 size; - - size = memparse(emu_cmdline, &emu_cmdline); - ret = split_nodes_size_interleave(&ei, &pi, 0, max_addr, size); - } else { - unsigned long n; - - n = simple_strtoul(emu_cmdline, NULL, 0); - ret = split_nodes_interleave(&ei, &pi, 0, max_addr, n); - } - - if (ret < 0) - goto no_emu; - - if (numa_cleanup_meminfo(&ei) < 0) { - pr_warning("NUMA: Warning: constructed meminfo invalid, disabling emulation\n"); - goto no_emu; - } - - /* - * Copy the original distance table. It's temporary so no need to - * reserve it. - */ - if (numa_dist_cnt) { - size_t size = numa_dist_cnt * sizeof(phys_dist[0]); - u64 phys; - - phys = memblock_find_in_range(0, - (u64)max_pfn_mapped << PAGE_SHIFT, - size, PAGE_SIZE); - if (phys == MEMBLOCK_ERROR) { - pr_warning("NUMA: Warning: can't allocate copy of distance table, disabling emulation\n"); - goto no_emu; - } - phys_dist = __va(phys); - - for (i = 0; i < numa_dist_cnt; i++) - for (j = 0; j < numa_dist_cnt; j++) - phys_dist[i * numa_dist_cnt + j] = - node_distance(i, j); - } - - /* commit */ - *numa_meminfo = ei; - - /* - * Transform __apicid_to_node table to use emulated nids by - * reverse-mapping phys_nid. The maps should always exist but fall - * back to zero just in case. - */ - for (i = 0; i < ARRAY_SIZE(__apicid_to_node); i++) { - if (__apicid_to_node[i] == NUMA_NO_NODE) - continue; - for (j = 0; j < ARRAY_SIZE(emu_nid_to_phys); j++) - if (__apicid_to_node[i] == emu_nid_to_phys[j]) - break; - __apicid_to_node[i] = j < ARRAY_SIZE(emu_nid_to_phys) ? j : 0; - } - - /* make sure all emulated nodes are mapped to a physical node */ - for (i = 0; i < ARRAY_SIZE(emu_nid_to_phys); i++) - if (emu_nid_to_phys[i] == NUMA_NO_NODE) - emu_nid_to_phys[i] = 0; - - /* transform distance table */ - numa_reset_distance(); - for (i = 0; i < MAX_NUMNODES; i++) { - for (j = 0; j < MAX_NUMNODES; j++) { - int physi = emu_nid_to_phys[i]; - int physj = emu_nid_to_phys[j]; - int dist; - - if (physi >= numa_dist_cnt || physj >= numa_dist_cnt) - dist = physi == physj ? - LOCAL_DISTANCE : REMOTE_DISTANCE; - else - dist = phys_dist[physi * numa_dist_cnt + physj]; - - numa_set_distance(i, j, dist); - } - } - return; - -no_emu: - /* No emulation. Build identity emu_nid_to_phys[] for numa_add_cpu() */ - for (i = 0; i < ARRAY_SIZE(emu_nid_to_phys); i++) - emu_nid_to_phys[i] = i; -} -#else /* CONFIG_NUMA_EMU */ -static inline void numa_emulation(struct numa_meminfo *numa_meminfo, - int numa_dist_cnt) -{ } -#endif /* CONFIG_NUMA_EMU */ - static int __init dummy_numa_init(void) { printk(KERN_INFO "%s\n", @@ -994,83 +602,3 @@ int __cpuinit numa_cpu_node(int cpu) return __apicid_to_node[apicid]; return NUMA_NO_NODE; } - -/* - * UGLINESS AHEAD: Currently, CONFIG_NUMA_EMU is 64bit only and makes use - * of 64bit specific data structures. The distinction is artificial and - * should be removed. numa_{add|remove}_cpu() are implemented in numa.c - * for both 32 and 64bit when CONFIG_NUMA_EMU is disabled but here when - * enabled. - * - * NUMA emulation is planned to be made generic and the following and other - * related code should be moved to numa.c. - */ -#ifdef CONFIG_NUMA_EMU -# ifndef CONFIG_DEBUG_PER_CPU_MAPS -void __cpuinit numa_add_cpu(int cpu) -{ - int physnid, nid; - - nid = numa_cpu_node(cpu); - if (nid == NUMA_NO_NODE) - nid = early_cpu_to_node(cpu); - BUG_ON(nid == NUMA_NO_NODE || !node_online(nid)); - - physnid = emu_nid_to_phys[nid]; - - /* - * Map the cpu to each emulated node that is allocated on the physical - * node of the cpu's apic id. - */ - for_each_online_node(nid) - if (emu_nid_to_phys[nid] == physnid) - cpumask_set_cpu(cpu, node_to_cpumask_map[nid]); -} - -void __cpuinit numa_remove_cpu(int cpu) -{ - int i; - - for_each_online_node(i) - cpumask_clear_cpu(cpu, node_to_cpumask_map[i]); -} -# else /* !CONFIG_DEBUG_PER_CPU_MAPS */ -static void __cpuinit numa_set_cpumask(int cpu, int enable) -{ - struct cpumask *mask; - int nid, physnid, i; - - nid = early_cpu_to_node(cpu); - if (nid == NUMA_NO_NODE) { - /* early_cpu_to_node() already emits a warning and trace */ - return; - } - - physnid = emu_nid_to_phys[nid]; - - for_each_online_node(i) { - if (emu_nid_to_phys[nid] != physnid) - continue; - - mask = debug_cpumask_set_cpu(cpu, enable); - if (!mask) - return; - - if (enable) - cpumask_set_cpu(cpu, mask); - else - cpumask_clear_cpu(cpu, mask); - } -} - -void __cpuinit numa_add_cpu(int cpu) -{ - numa_set_cpumask(cpu, 1); -} - -void __cpuinit numa_remove_cpu(int cpu) -{ - numa_set_cpumask(cpu, 0); -} -# endif /* !CONFIG_DEBUG_PER_CPU_MAPS */ -#endif /* CONFIG_NUMA_EMU */ diff --git a/arch/x86/mm/numa_emulation.c b/arch/x86/mm/numa_emulation.c new file mode 100644 index 00000000000..23fa2d00253 --- /dev/null +++ b/arch/x86/mm/numa_emulation.c @@ -0,0 +1,452 @@ +/* + * NUMA emulation + */ +#include +#include +#include +#include +#include + +#include "numa_internal.h" + +static int emu_nid_to_phys[MAX_NUMNODES] __cpuinitdata; +static char *emu_cmdline __initdata; + +void __init numa_emu_cmdline(char *str) +{ + emu_cmdline = str; +} + +static int __init emu_find_memblk_by_nid(int nid, const struct numa_meminfo *mi) +{ + int i; + + for (i = 0; i < mi->nr_blks; i++) + if (mi->blk[i].nid == nid) + return i; + return -ENOENT; +} + +/* + * Sets up nid to range from @start to @end. The return value is -errno if + * something went wrong, 0 otherwise. + */ +static int __init emu_setup_memblk(struct numa_meminfo *ei, + struct numa_meminfo *pi, + int nid, int phys_blk, u64 size) +{ + struct numa_memblk *eb = &ei->blk[ei->nr_blks]; + struct numa_memblk *pb = &pi->blk[phys_blk]; + + if (ei->nr_blks >= NR_NODE_MEMBLKS) { + pr_err("NUMA: Too many emulated memblks, failing emulation\n"); + return -EINVAL; + } + + ei->nr_blks++; + eb->start = pb->start; + eb->end = pb->start + size; + eb->nid = nid; + + if (emu_nid_to_phys[nid] == NUMA_NO_NODE) + emu_nid_to_phys[nid] = pb->nid; + + pb->start += size; + if (pb->start >= pb->end) { + WARN_ON_ONCE(pb->start > pb->end); + numa_remove_memblk_from(phys_blk, pi); + } + + printk(KERN_INFO "Faking node %d at %016Lx-%016Lx (%LuMB)\n", nid, + eb->start, eb->end, (eb->end - eb->start) >> 20); + return 0; +} + +/* + * Sets up nr_nodes fake nodes interleaved over physical nodes ranging from addr + * to max_addr. The return value is the number of nodes allocated. + */ +static int __init split_nodes_interleave(struct numa_meminfo *ei, + struct numa_meminfo *pi, + u64 addr, u64 max_addr, int nr_nodes) +{ + nodemask_t physnode_mask = NODE_MASK_NONE; + u64 size; + int big; + int nid = 0; + int i, ret; + + if (nr_nodes <= 0) + return -1; + if (nr_nodes > MAX_NUMNODES) { + pr_info("numa=fake=%d too large, reducing to %d\n", + nr_nodes, MAX_NUMNODES); + nr_nodes = MAX_NUMNODES; + } + + size = (max_addr - addr - memblock_x86_hole_size(addr, max_addr)) / nr_nodes; + /* + * Calculate the number of big nodes that can be allocated as a result + * of consolidating the remainder. + */ + big = ((size & ~FAKE_NODE_MIN_HASH_MASK) * nr_nodes) / + FAKE_NODE_MIN_SIZE; + + size &= FAKE_NODE_MIN_HASH_MASK; + if (!size) { + pr_err("Not enough memory for each node. " + "NUMA emulation disabled.\n"); + return -1; + } + + for (i = 0; i < pi->nr_blks; i++) + node_set(pi->blk[i].nid, physnode_mask); + + /* + * Continue to fill physical nodes with fake nodes until there is no + * memory left on any of them. + */ + while (nodes_weight(physnode_mask)) { + for_each_node_mask(i, physnode_mask) { + u64 dma32_end = PFN_PHYS(MAX_DMA32_PFN); + u64 start, limit, end; + int phys_blk; + + phys_blk = emu_find_memblk_by_nid(i, pi); + if (phys_blk < 0) { + node_clear(i, physnode_mask); + continue; + } + start = pi->blk[phys_blk].start; + limit = pi->blk[phys_blk].end; + end = start + size; + + if (nid < big) + end += FAKE_NODE_MIN_SIZE; + + /* + * Continue to add memory to this fake node if its + * non-reserved memory is less than the per-node size. + */ + while (end - start - + memblock_x86_hole_size(start, end) < size) { + end += FAKE_NODE_MIN_SIZE; + if (end > limit) { + end = limit; + break; + } + } + + /* + * If there won't be at least FAKE_NODE_MIN_SIZE of + * non-reserved memory in ZONE_DMA32 for the next node, + * this one must extend to the boundary. + */ + if (end < dma32_end && dma32_end - end - + memblock_x86_hole_size(end, dma32_end) < FAKE_NODE_MIN_SIZE) + end = dma32_end; + + /* + * If there won't be enough non-reserved memory for the + * next node, this one must extend to the end of the + * physical node. + */ + if (limit - end - + memblock_x86_hole_size(end, limit) < size) + end = limit; + + ret = emu_setup_memblk(ei, pi, nid++ % nr_nodes, + phys_blk, + min(end, limit) - start); + if (ret < 0) + return ret; + } + } + return 0; +} + +/* + * Returns the end address of a node so that there is at least `size' amount of + * non-reserved memory or `max_addr' is reached. + */ +static u64 __init find_end_of_node(u64 start, u64 max_addr, u64 size) +{ + u64 end = start + size; + + while (end - start - memblock_x86_hole_size(start, end) < size) { + end += FAKE_NODE_MIN_SIZE; + if (end > max_addr) { + end = max_addr; + break; + } + } + return end; +} + +/* + * Sets up fake nodes of `size' interleaved over physical nodes ranging from + * `addr' to `max_addr'. The return value is the number of nodes allocated. + */ +static int __init split_nodes_size_interleave(struct numa_meminfo *ei, + struct numa_meminfo *pi, + u64 addr, u64 max_addr, u64 size) +{ + nodemask_t physnode_mask = NODE_MASK_NONE; + u64 min_size; + int nid = 0; + int i, ret; + + if (!size) + return -1; + /* + * The limit on emulated nodes is MAX_NUMNODES, so the size per node is + * increased accordingly if the requested size is too small. This + * creates a uniform distribution of node sizes across the entire + * machine (but not necessarily over physical nodes). + */ + min_size = (max_addr - addr - memblock_x86_hole_size(addr, max_addr)) / + MAX_NUMNODES; + min_size = max(min_size, FAKE_NODE_MIN_SIZE); + if ((min_size & FAKE_NODE_MIN_HASH_MASK) < min_size) + min_size = (min_size + FAKE_NODE_MIN_SIZE) & + FAKE_NODE_MIN_HASH_MASK; + if (size < min_size) { + pr_err("Fake node size %LuMB too small, increasing to %LuMB\n", + size >> 20, min_size >> 20); + size = min_size; + } + size &= FAKE_NODE_MIN_HASH_MASK; + + for (i = 0; i < pi->nr_blks; i++) + node_set(pi->blk[i].nid, physnode_mask); + + /* + * Fill physical nodes with fake nodes of size until there is no memory + * left on any of them. + */ + while (nodes_weight(physnode_mask)) { + for_each_node_mask(i, physnode_mask) { + u64 dma32_end = MAX_DMA32_PFN << PAGE_SHIFT; + u64 start, limit, end; + int phys_blk; + + phys_blk = emu_find_memblk_by_nid(i, pi); + if (phys_blk < 0) { + node_clear(i, physnode_mask); + continue; + } + start = pi->blk[phys_blk].start; + limit = pi->blk[phys_blk].end; + + end = find_end_of_node(start, limit, size); + /* + * If there won't be at least FAKE_NODE_MIN_SIZE of + * non-reserved memory in ZONE_DMA32 for the next node, + * this one must extend to the boundary. + */ + if (end < dma32_end && dma32_end - end - + memblock_x86_hole_size(end, dma32_end) < FAKE_NODE_MIN_SIZE) + end = dma32_end; + + /* + * If there won't be enough non-reserved memory for the + * next node, this one must extend to the end of the + * physical node. + */ + if (limit - end - + memblock_x86_hole_size(end, limit) < size) + end = limit; + + ret = emu_setup_memblk(ei, pi, nid++ % MAX_NUMNODES, + phys_blk, + min(end, limit) - start); + if (ret < 0) + return ret; + } + } + return 0; +} + +/* + * Sets up the system RAM area from start_pfn to last_pfn according to the + * numa=fake command-line option. + */ +void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) +{ + static struct numa_meminfo ei __initdata; + static struct numa_meminfo pi __initdata; + const u64 max_addr = max_pfn << PAGE_SHIFT; + u8 *phys_dist = NULL; + int i, j, ret; + + if (!emu_cmdline) + goto no_emu; + + memset(&ei, 0, sizeof(ei)); + pi = *numa_meminfo; + + for (i = 0; i < MAX_NUMNODES; i++) + emu_nid_to_phys[i] = NUMA_NO_NODE; + + /* + * If the numa=fake command-line contains a 'M' or 'G', it represents + * the fixed node size. Otherwise, if it is just a single number N, + * split the system RAM into N fake nodes. + */ + if (strchr(emu_cmdline, 'M') || strchr(emu_cmdline, 'G')) { + u64 size; + + size = memparse(emu_cmdline, &emu_cmdline); + ret = split_nodes_size_interleave(&ei, &pi, 0, max_addr, size); + } else { + unsigned long n; + + n = simple_strtoul(emu_cmdline, NULL, 0); + ret = split_nodes_interleave(&ei, &pi, 0, max_addr, n); + } + + if (ret < 0) + goto no_emu; + + if (numa_cleanup_meminfo(&ei) < 0) { + pr_warning("NUMA: Warning: constructed meminfo invalid, disabling emulation\n"); + goto no_emu; + } + + /* + * Copy the original distance table. It's temporary so no need to + * reserve it. + */ + if (numa_dist_cnt) { + size_t size = numa_dist_cnt * sizeof(phys_dist[0]); + u64 phys; + + phys = memblock_find_in_range(0, + (u64)max_pfn_mapped << PAGE_SHIFT, + size, PAGE_SIZE); + if (phys == MEMBLOCK_ERROR) { + pr_warning("NUMA: Warning: can't allocate copy of distance table, disabling emulation\n"); + goto no_emu; + } + phys_dist = __va(phys); + + for (i = 0; i < numa_dist_cnt; i++) + for (j = 0; j < numa_dist_cnt; j++) + phys_dist[i * numa_dist_cnt + j] = + node_distance(i, j); + } + + /* commit */ + *numa_meminfo = ei; + + /* + * Transform __apicid_to_node table to use emulated nids by + * reverse-mapping phys_nid. The maps should always exist but fall + * back to zero just in case. + */ + for (i = 0; i < ARRAY_SIZE(__apicid_to_node); i++) { + if (__apicid_to_node[i] == NUMA_NO_NODE) + continue; + for (j = 0; j < ARRAY_SIZE(emu_nid_to_phys); j++) + if (__apicid_to_node[i] == emu_nid_to_phys[j]) + break; + __apicid_to_node[i] = j < ARRAY_SIZE(emu_nid_to_phys) ? j : 0; + } + + /* make sure all emulated nodes are mapped to a physical node */ + for (i = 0; i < ARRAY_SIZE(emu_nid_to_phys); i++) + if (emu_nid_to_phys[i] == NUMA_NO_NODE) + emu_nid_to_phys[i] = 0; + + /* transform distance table */ + numa_reset_distance(); + for (i = 0; i < MAX_NUMNODES; i++) { + for (j = 0; j < MAX_NUMNODES; j++) { + int physi = emu_nid_to_phys[i]; + int physj = emu_nid_to_phys[j]; + int dist; + + if (physi >= numa_dist_cnt || physj >= numa_dist_cnt) + dist = physi == physj ? + LOCAL_DISTANCE : REMOTE_DISTANCE; + else + dist = phys_dist[physi * numa_dist_cnt + physj]; + + numa_set_distance(i, j, dist); + } + } + return; + +no_emu: + /* No emulation. Build identity emu_nid_to_phys[] for numa_add_cpu() */ + for (i = 0; i < ARRAY_SIZE(emu_nid_to_phys); i++) + emu_nid_to_phys[i] = i; +} + +#ifndef CONFIG_DEBUG_PER_CPU_MAPS +void __cpuinit numa_add_cpu(int cpu) +{ + int physnid, nid; + + nid = numa_cpu_node(cpu); + if (nid == NUMA_NO_NODE) + nid = early_cpu_to_node(cpu); + BUG_ON(nid == NUMA_NO_NODE || !node_online(nid)); + + physnid = emu_nid_to_phys[nid]; + + /* + * Map the cpu to each emulated node that is allocated on the physical + * node of the cpu's apic id. + */ + for_each_online_node(nid) + if (emu_nid_to_phys[nid] == physnid) + cpumask_set_cpu(cpu, node_to_cpumask_map[nid]); +} + +void __cpuinit numa_remove_cpu(int cpu) +{ + int i; + + for_each_online_node(i) + cpumask_clear_cpu(cpu, node_to_cpumask_map[i]); +} +#else /* !CONFIG_DEBUG_PER_CPU_MAPS */ +static void __cpuinit numa_set_cpumask(int cpu, int enable) +{ + struct cpumask *mask; + int nid, physnid, i; + + nid = early_cpu_to_node(cpu); + if (nid == NUMA_NO_NODE) { + /* early_cpu_to_node() already emits a warning and trace */ + return; + } + + physnid = emu_nid_to_phys[nid]; + + for_each_online_node(i) { + if (emu_nid_to_phys[nid] != physnid) + continue; + + mask = debug_cpumask_set_cpu(cpu, enable); + if (!mask) + return; + + if (enable) + cpumask_set_cpu(cpu, mask); + else + cpumask_clear_cpu(cpu, mask); + } +} + +void __cpuinit numa_add_cpu(int cpu) +{ + numa_set_cpumask(cpu, 1); +} + +void __cpuinit numa_remove_cpu(int cpu) +{ + numa_set_cpumask(cpu, 0); +} +#endif /* !CONFIG_DEBUG_PER_CPU_MAPS */ diff --git a/arch/x86/mm/numa_internal.h b/arch/x86/mm/numa_internal.h new file mode 100644 index 00000000000..ef2d97377d7 --- /dev/null +++ b/arch/x86/mm/numa_internal.h @@ -0,0 +1,31 @@ +#ifndef __X86_MM_NUMA_INTERNAL_H +#define __X86_MM_NUMA_INTERNAL_H + +#include +#include + +struct numa_memblk { + u64 start; + u64 end; + int nid; +}; + +struct numa_meminfo { + int nr_blks; + struct numa_memblk blk[NR_NODE_MEMBLKS]; +}; + +void __init numa_remove_memblk_from(int idx, struct numa_meminfo *mi); +int __init numa_cleanup_meminfo(struct numa_meminfo *mi); +void __init numa_reset_distance(void); + +#ifdef CONFIG_NUMA_EMU +void __init numa_emulation(struct numa_meminfo *numa_meminfo, + int numa_dist_cnt); +#else +static inline void numa_emulation(struct numa_meminfo *numa_meminfo, + int numa_dist_cnt) +{ } +#endif + +#endif /* __X86_MM_NUMA_INTERNAL_H */ -- cgit v1.2.3-18-g5258 From 90e6b677b47ff8c5ba1637941af6b9f92723b003 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 22 Feb 2011 11:10:08 +0100 Subject: x86-64, NUMA: Add proper function comments to global functions Signed-off-by: Tejun Heo Cc: Yinghai Lu Cc: Ingo Molnar --- arch/x86/mm/numa_64.c | 50 +++++++++++++++++++++++++++++++++++++------- arch/x86/mm/numa_emulation.c | 29 ++++++++++++++++++++++--- 2 files changed, 69 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index 45a361b16a5..848381bdd35 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -205,6 +205,14 @@ static int __init numa_add_memblk_to(int nid, u64 start, u64 end, return 0; } +/** + * numa_remove_memblk_from - Remove one numa_memblk from a numa_meminfo + * @idx: Index of memblk to remove + * @mi: numa_meminfo to remove memblk from + * + * Remove @idx'th numa_memblk from @mi by shifting @mi->blk[] and + * decrementing @mi->nr_blks. + */ void __init numa_remove_memblk_from(int idx, struct numa_meminfo *mi) { mi->nr_blks--; @@ -212,6 +220,17 @@ void __init numa_remove_memblk_from(int idx, struct numa_meminfo *mi) (mi->nr_blks - idx) * sizeof(mi->blk[0])); } +/** + * numa_add_memblk - Add one numa_memblk to numa_meminfo + * @nid: NUMA node ID of the new memblk + * @start: Start address of the new memblk + * @end: End address of the new memblk + * + * Add a new memblk to the default numa_meminfo. + * + * RETURNS: + * 0 on success, -errno on failure. + */ int __init numa_add_memblk(int nid, u64 start, u64 end) { return numa_add_memblk_to(nid, start, end, &numa_meminfo); @@ -263,6 +282,16 @@ setup_node_bootmem(int nodeid, unsigned long start, unsigned long end) node_set_online(nodeid); } +/** + * numa_cleanup_meminfo - Cleanup a numa_meminfo + * @mi: numa_meminfo to clean up + * + * Sanitize @mi by merging and removing unncessary memblks. Also check for + * conflicts and clear unused memblks. + * + * RETURNS: + * 0 on success, -errno on failure. + */ int __init numa_cleanup_meminfo(struct numa_meminfo *mi) { const u64 low = 0; @@ -353,9 +382,11 @@ static void __init numa_nodemask_from_meminfo(nodemask_t *nodemask, node_set(mi->blk[i].nid, *nodemask); } -/* - * Reset distance table. The current table is freed. The next - * numa_set_distance() call will create a new one. +/** + * numa_reset_distance - Reset NUMA distance table + * + * The current table is freed. The next numa_set_distance() call will + * create a new one. */ void __init numa_reset_distance(void) { @@ -370,10 +401,15 @@ void __init numa_reset_distance(void) numa_distance = NULL; } -/* - * Set the distance between node @from to @to to @distance. If distance - * table doesn't exist, one which is large enough to accomodate all the - * currently known nodes will be created. +/** + * numa_set_distance - Set NUMA distance from one NUMA to another + * @from: the 'from' node to set distance + * @to: the 'to' node to set distance + * @distance: NUMA distance + * + * Set the distance from node @from to @to to @distance. If distance table + * doesn't exist, one which is large enough to accomodate all the currently + * known nodes will be created. */ void __init numa_set_distance(int from, int to, int distance) { diff --git a/arch/x86/mm/numa_emulation.c b/arch/x86/mm/numa_emulation.c index 23fa2d00253..607a2e8bc87 100644 --- a/arch/x86/mm/numa_emulation.c +++ b/arch/x86/mm/numa_emulation.c @@ -267,9 +267,32 @@ static int __init split_nodes_size_interleave(struct numa_meminfo *ei, return 0; } -/* - * Sets up the system RAM area from start_pfn to last_pfn according to the - * numa=fake command-line option. +/** + * numa_emulation - Emulate NUMA nodes + * @numa_meminfo: NUMA configuration to massage + * @numa_dist_cnt: The size of the physical NUMA distance table + * + * Emulate NUMA nodes according to the numa=fake kernel parameter. + * @numa_meminfo contains the physical memory configuration and is modified + * to reflect the emulated configuration on success. @numa_dist_cnt is + * used to determine the size of the physical distance table. + * + * On success, the following modifications are made. + * + * - @numa_meminfo is updated to reflect the emulated nodes. + * + * - __apicid_to_node[] is updated such that APIC IDs are mapped to the + * emulated nodes. + * + * - NUMA distance table is rebuilt to represent distances between emulated + * nodes. The distances are determined considering how emulated nodes + * are mapped to physical nodes and match the actual distances. + * + * - emu_nid_to_phys[] reflects how emulated nodes are mapped to physical + * nodes. This is used by numa_add_cpu() and numa_remove_cpu(). + * + * If emulation is not enabled or fails, emu_nid_to_phys[] is filled with + * identity mapping and no other modification is made. */ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) { -- cgit v1.2.3-18-g5258 From 2bf50555b0920be7e29d3823f6bbd20ee5920489 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 22 Feb 2011 11:18:49 +0100 Subject: x86-64, NUMA: Seperate out numa_alloc_distance() from numa_set_distance() Alloc code is much bigger the distance setting. Separate it out into numa_alloc_distance() for readability. -v2: Let alloc_numa_distance to return -ENOMEM on failing path, requested by tj. -tj: Description update. Minor tweaks including function name, location and return value check. Signed-off-by: Yinghai Lu Acked-by: David Rientjes Signed-off-by: Tejun Heo --- arch/x86/mm/numa_64.c | 75 +++++++++++++++++++++++++++------------------------ 1 file changed, 40 insertions(+), 35 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index 848381bdd35..cccc01d8415 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -401,6 +401,44 @@ void __init numa_reset_distance(void) numa_distance = NULL; } +static int __init numa_alloc_distance(void) +{ + nodemask_t nodes_parsed; + size_t size; + int i, j, cnt = 0; + u64 phys; + + /* size the new table and allocate it */ + nodes_parsed = numa_nodes_parsed; + numa_nodemask_from_meminfo(&nodes_parsed, &numa_meminfo); + + for_each_node_mask(i, nodes_parsed) + cnt = i; + size = ++cnt * sizeof(numa_distance[0]); + + phys = memblock_find_in_range(0, (u64)max_pfn_mapped << PAGE_SHIFT, + size, PAGE_SIZE); + if (phys == MEMBLOCK_ERROR) { + pr_warning("NUMA: Warning: can't allocate distance table!\n"); + /* don't retry until explicitly reset */ + numa_distance = (void *)1LU; + return -ENOMEM; + } + memblock_x86_reserve_range(phys, phys + size, "NUMA DIST"); + + numa_distance = __va(phys); + numa_distance_cnt = cnt; + + /* fill with the default distances */ + for (i = 0; i < cnt; i++) + for (j = 0; j < cnt; j++) + numa_distance[i * cnt + j] = i == j ? + LOCAL_DISTANCE : REMOTE_DISTANCE; + printk(KERN_DEBUG "NUMA: Initialized distance table, cnt=%d\n", cnt); + + return 0; +} + /** * numa_set_distance - Set NUMA distance from one NUMA to another * @from: the 'from' node to set distance @@ -413,41 +451,8 @@ void __init numa_reset_distance(void) */ void __init numa_set_distance(int from, int to, int distance) { - if (!numa_distance) { - nodemask_t nodes_parsed; - size_t size; - int i, j, cnt = 0; - u64 phys; - - /* size the new table and allocate it */ - nodes_parsed = numa_nodes_parsed; - numa_nodemask_from_meminfo(&nodes_parsed, &numa_meminfo); - - for_each_node_mask(i, nodes_parsed) - cnt = i; - size = ++cnt * sizeof(numa_distance[0]); - - phys = memblock_find_in_range(0, - (u64)max_pfn_mapped << PAGE_SHIFT, - size, PAGE_SIZE); - if (phys == MEMBLOCK_ERROR) { - pr_warning("NUMA: Warning: can't allocate distance table!\n"); - /* don't retry until explicitly reset */ - numa_distance = (void *)1LU; - return; - } - memblock_x86_reserve_range(phys, phys + size, "NUMA DIST"); - - numa_distance = __va(phys); - numa_distance_cnt = cnt; - - /* fill with the default distances */ - for (i = 0; i < cnt; i++) - for (j = 0; j < cnt; j++) - numa_distance[i * cnt + j] = i == j ? - LOCAL_DISTANCE : REMOTE_DISTANCE; - printk(KERN_DEBUG "NUMA: Initialized distance table, cnt=%d\n", cnt); - } + if (!numa_distance && numa_alloc_distance() < 0) + return; if (from >= numa_distance_cnt || to >= numa_distance_cnt) { printk_once(KERN_DEBUG "NUMA: Debug: distance out of bound, from=%d to=%d distance=%d\n", -- cgit v1.2.3-18-g5258 From 2c46d2aec054e61a33feac8c3992218eabdcc22a Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Wed, 9 Feb 2011 18:29:39 +0100 Subject: KVM: SVM: Advance instruction pointer in dr_intercept In the dr_intercept function a new cpu-feature called decode-assists is implemented and used when available. This code-path does not advance the guest-rip causing the guest to dead-loop over mov-dr instructions. This is fixed by this patch. Signed-off-by: Joerg Roedel Signed-off-by: Avi Kivity --- arch/x86/kvm/svm.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index 54ce246a383..63fec1531e8 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -2777,6 +2777,8 @@ static int dr_interception(struct vcpu_svm *svm) kvm_register_write(&svm->vcpu, reg, val); } + skip_emulated_instruction(&svm->vcpu); + return 1; } -- cgit v1.2.3-18-g5258 From 73a92aa4f1d6786eaa5b4e637eee648db0dfd7a7 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Thu, 3 Feb 2011 12:45:22 +0000 Subject: omap3sdp: clean regulator supply mapping in board file clean the regulator supply mapping data in the 3430sdp board file (which is spread all over) by moving all of them together. Also use the REGULATOR_SUPPLY macro and remove instances of mapping dev pointers at run time. Additonally define all regulator_consumer_supply as array's and use ARRAY_SIZE macro to define num_consumer_supplies. Signed-off-by: Rajendra Nayak Reviewed-by: Felipe Balbi Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-3430sdp.c | 71 ++++++++++++++++--------------------- 1 file changed, 31 insertions(+), 40 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 7f8c7a73c53..a15f115f1ba 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -315,11 +315,6 @@ static struct platform_device sdp3430_dss_device = { }, }; -static struct regulator_consumer_supply sdp3430_vdda_dac_supply = { - .supply = "vdda_dac", - .dev = &sdp3430_dss_device.dev, -}; - static struct platform_device *sdp3430_devices[] __initdata = { &sdp3430_dss_device, }; @@ -369,18 +364,6 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; -static struct regulator_consumer_supply sdp3430_vmmc1_supply = { - .supply = "vmmc", -}; - -static struct regulator_consumer_supply sdp3430_vsim_supply = { - .supply = "vmmc_aux", -}; - -static struct regulator_consumer_supply sdp3430_vmmc2_supply = { - .supply = "vmmc", -}; - static int sdp3430_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { @@ -391,13 +374,6 @@ static int sdp3430_twl_gpio_setup(struct device *dev, mmc[1].gpio_cd = gpio + 1; omap2_hsmmc_init(mmc); - /* link regulators to MMC adapters ... we "know" the - * regulators will be set up only *after* we return. - */ - sdp3430_vmmc1_supply.dev = mmc[0].dev; - sdp3430_vsim_supply.dev = mmc[0].dev; - sdp3430_vmmc2_supply.dev = mmc[1].dev; - /* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */ gpio_request(gpio + 7, "sub_lcd_en_bkl"); gpio_direction_output(gpio + 7, 0); @@ -426,11 +402,34 @@ static struct twl4030_madc_platform_data sdp3430_madc_data = { .irq_line = 1, }; +/* regulator consumer mappings */ + /* ads7846 on SPI */ static struct regulator_consumer_supply sdp3430_vaux3_supplies[] = { REGULATOR_SUPPLY("vcc", "spi1.0"), }; +static struct regulator_consumer_supply sdp3430_vdda_dac_supplies[] = { + REGULATOR_SUPPLY("vdda_dac", "omapdss"), +}; + +/* VPLL2 for digital video outputs */ +static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = { + REGULATOR_SUPPLY("vdds_dsi", "omapdss"), +}; + +static struct regulator_consumer_supply sdp3430_vmmc1_supplies[] = { + REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0"), +}; + +static struct regulator_consumer_supply sdp3430_vsim_supplies[] = { + REGULATOR_SUPPLY("vmmc_aux", "mmci-omap-hs.0"), +}; + +static struct regulator_consumer_supply sdp3430_vmmc2_supplies[] = { + REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1"), +}; + /* * Apply all the fixed voltages since most versions of U-Boot * don't bother with that initialization. @@ -501,8 +500,8 @@ static struct regulator_init_data sdp3430_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &sdp3430_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(sdp3430_vmmc1_supplies), + .consumer_supplies = sdp3430_vmmc1_supplies, }; /* VMMC2 for MMC2 card */ @@ -516,8 +515,8 @@ static struct regulator_init_data sdp3430_vmmc2 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &sdp3430_vmmc2_supply, + .num_consumer_supplies = ARRAY_SIZE(sdp3430_vmmc2_supplies), + .consumer_supplies = sdp3430_vmmc2_supplies, }; /* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */ @@ -531,8 +530,8 @@ static struct regulator_init_data sdp3430_vsim = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &sdp3430_vsim_supply, + .num_consumer_supplies = ARRAY_SIZE(sdp3430_vsim_supplies), + .consumer_supplies = sdp3430_vsim_supplies, }; /* VDAC for DSS driving S-Video */ @@ -546,16 +545,8 @@ static struct regulator_init_data sdp3430_vdac = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &sdp3430_vdda_dac_supply, -}; - -/* VPLL2 for digital video outputs */ -static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = { - { - .supply = "vdds_dsi", - .dev = &sdp3430_dss_device.dev, - } + .num_consumer_supplies = ARRAY_SIZE(sdp3430_vdda_dac_supplies), + .consumer_supplies = sdp3430_vdda_dac_supplies, }; static struct regulator_init_data sdp3430_vpll2 = { -- cgit v1.2.3-18-g5258 From 530a5a50168e5e14ba2fedd5e66796156b1df565 Mon Sep 17 00:00:00 2001 From: Balaji T K Date: Mon, 7 Feb 2011 20:59:59 +0530 Subject: OMAP4: Fix -EINVAL for vana, vcxio, vdac Fixed regulators in twl6030 do not have set_voltage hook. Regulator core returns -22 if set_voltage is NULL and apply_uV is set while applying the constraint to set voltage resulting in failure during probe of these regulators. Do not set apply_uV for fixed regulators which don't have set_voltage. machine_constraints_voltage: VANA: failed to apply 2100000uV constraint twl_reg twl_reg.43: can't register VANA, -22 twl_reg: probe of twl_reg.43 failed with error -22 machine_constraints_voltage: VCXIO: failed to apply 1800000uV constraint twl_reg twl_reg.44: can't register VCXIO, -22 twl_reg: probe of twl_reg.44 failed with error -22 machine_constraints_voltage: VDAC: failed to apply 1800000uV constraint twl_reg twl_reg.45: can't register VDAC, -22 twl_reg: probe of twl_reg.45 failed with error -22 Signed-off-by: Balaji T K Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-4430sdp.c | 3 --- arch/arm/mach-omap2/board-omap4panda.c | 3 --- 2 files changed, 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 12d99e582cd..27d9583811c 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -433,7 +433,6 @@ static struct regulator_init_data sdp4430_vana = { .constraints = { .min_uV = 2100000, .max_uV = 2100000, - .apply_uV = true, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_MODE @@ -445,7 +444,6 @@ static struct regulator_init_data sdp4430_vcxio = { .constraints = { .min_uV = 1800000, .max_uV = 1800000, - .apply_uV = true, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_MODE @@ -457,7 +455,6 @@ static struct regulator_init_data sdp4430_vdac = { .constraints = { .min_uV = 1800000, .max_uV = 1800000, - .apply_uV = true, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_MODE diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index fca5b9e80c1..220d3b85431 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -304,7 +304,6 @@ static struct regulator_init_data omap4_panda_vana = { .constraints = { .min_uV = 2100000, .max_uV = 2100000, - .apply_uV = true, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_MODE @@ -316,7 +315,6 @@ static struct regulator_init_data omap4_panda_vcxio = { .constraints = { .min_uV = 1800000, .max_uV = 1800000, - .apply_uV = true, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_MODE @@ -328,7 +326,6 @@ static struct regulator_init_data omap4_panda_vdac = { .constraints = { .min_uV = 1800000, .max_uV = 1800000, - .apply_uV = true, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_MODE -- cgit v1.2.3-18-g5258 From d3f02fc3409824ff9b29bc23e60e76da768a1205 Mon Sep 17 00:00:00 2001 From: Balaji T K Date: Mon, 7 Feb 2011 16:08:47 +0000 Subject: OMAP2: add regulator for MMC1 Signed-off-by: Balaji T K Tested-by: Kishore Kadiyala Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-2430sdp.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index ec74c0f2051..cc42d474c44 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -147,6 +148,25 @@ static void __init omap_2430sdp_init_early(void) omap2_init_common_devices(NULL, NULL); } +static struct regulator_consumer_supply sdp2430_vmmc1_supplies[] = { + REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0"), +}; + +/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ +static struct regulator_init_data sdp2430_vmmc1 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 3150000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(sdp2430_vmmc1_supplies), + .consumer_supplies = &sdp2430_vmmc1_supplies[0], +}; + static struct twl4030_gpio_platform_data sdp2430_gpio_data = { .gpio_base = OMAP_MAX_GPIO_LINES, .irq_base = TWL4030_GPIO_IRQ_BASE, @@ -159,6 +179,7 @@ static struct twl4030_platform_data sdp2430_twldata = { /* platform_data for children goes here */ .gpio = &sdp2430_gpio_data, + .vmmc1 = &sdp2430_vmmc1, }; static struct i2c_board_info __initdata sdp2430_i2c_boardinfo[] = { -- cgit v1.2.3-18-g5258 From 66e171a3e8ed9179b2754831ae138e8fc251e4c7 Mon Sep 17 00:00:00 2001 From: Panduranga Mallireddy Date: Tue, 15 Feb 2011 03:40:32 -0500 Subject: omap: panda: wlan board muxing Add board muxing to support the wlan wl1271 chip that is hardwired to mmc5 (fifth mmc controller) on the PANDA. Based on the wlan board muxing for zoom3 by Ohad Ben-Cohen Signed-off-by: Panduranga Mallireddy Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-omap4panda.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 220d3b85431..9f4f86e73ce 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -387,6 +387,19 @@ static int __init omap4_panda_i2c_init(void) #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { + /* WLAN IRQ - GPIO 53 */ + OMAP4_MUX(GPMC_NCS3, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), + /* WLAN POWER ENABLE - GPIO 43 */ + OMAP4_MUX(GPMC_A19, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT), + /* WLAN SDIO: MMC5 CMD */ + OMAP4_MUX(SDMMC5_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), + /* WLAN SDIO: MMC5 CLK */ + OMAP4_MUX(SDMMC5_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), + /* WLAN SDIO: MMC5 DAT[0-3] */ + OMAP4_MUX(SDMMC5_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), + OMAP4_MUX(SDMMC5_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), + OMAP4_MUX(SDMMC5_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), + OMAP4_MUX(SDMMC5_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), { .reg_offset = OMAP_MUX_TERMINATOR }, }; #else -- cgit v1.2.3-18-g5258 From cdc43482713d0af97d30d9b5d3c53b18fcec5d35 Mon Sep 17 00:00:00 2001 From: Panduranga Mallireddy Date: Tue, 15 Feb 2011 03:40:33 -0500 Subject: omap: select REGULATOR_FIXED_VOLTAGE by default for panda and sdp4430 Power to the wl12xx wlan device is controlled by a fixed regulator. Boards that have the wl12xx should select REGULATOR_FIXED_VOLTAGE. Signed-off-by: Panduranga Mallireddy Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 9b4e78fe3d1..b9d8a7b2a86 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -310,6 +310,7 @@ config MACH_OMAP_4430SDP depends on ARCH_OMAP4 select OMAP_PACKAGE_CBL select OMAP_PACKAGE_CBS + select REGULATOR_FIXED_VOLTAGE config MACH_OMAP4_PANDA bool "OMAP4 Panda Board" @@ -317,6 +318,7 @@ config MACH_OMAP4_PANDA depends on ARCH_OMAP4 select OMAP_PACKAGE_CBL select OMAP_PACKAGE_CBS + select REGULATOR_FIXED_VOLTAGE config OMAP3_EMU bool "OMAP3 debugging peripherals" -- cgit v1.2.3-18-g5258 From edc840613c0fff590cad2deafdeffe6ea51405f7 Mon Sep 17 00:00:00 2001 From: Panduranga Mallireddy Date: Tue, 15 Feb 2011 03:40:34 -0500 Subject: omap: panda: add fixed regulator device for wlan Add a fixed regulator vmmc device to enable power control of the wl1271 wlan device. Based on the patch for zoom by Ohad Ben-Cohen Signed-off-by: Panduranga Mallireddy Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-omap4panda.c | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 9f4f86e73ce..d56bef15d3c 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include @@ -45,6 +46,7 @@ #define GPIO_HUB_POWER 1 #define GPIO_HUB_NRESET 62 +#define GPIO_WIFI_PMENA 43 static struct gpio_led gpio_leds[] = { { @@ -171,6 +173,37 @@ static struct regulator_consumer_supply omap4_panda_vmmc_supply[] = { }, }; +static struct regulator_consumer_supply omap4_panda_vmmc5_supply = { + .supply = "vmmc", + .dev_name = "mmci-omap-hs.4", +}; + +static struct regulator_init_data panda_vmmc5 = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &omap4_panda_vmmc5_supply, +}; + +static struct fixed_voltage_config panda_vwlan = { + .supply_name = "vwl1271", + .microvolts = 1800000, /* 1.8V */ + .gpio = GPIO_WIFI_PMENA, + .startup_delay = 70000, /* 70msec */ + .enable_high = 1, + .enabled_at_boot = 0, + .init_data = &panda_vmmc5, +}; + +static struct platform_device omap_vwlan_device = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &panda_vwlan, + }, +}; + static int omap4_twl6030_hsmmc_late_init(struct device *dev) { int ret = 0; @@ -416,6 +449,7 @@ static void __init omap4_panda_init(void) omap4_panda_i2c_init(); platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices)); + platform_device_register(&omap_vwlan_device); omap_serial_init(); omap4_twl6030_hsmmc_init(mmc); omap4_ehci_init(); -- cgit v1.2.3-18-g5258 From b17e0979113b7b75bb3f73e2243d156f91698edb Mon Sep 17 00:00:00 2001 From: Panduranga Mallireddy Date: Tue, 15 Feb 2011 03:40:35 -0500 Subject: omap: panda: add mmc5/wl1271 device support Add MMC5 support on PANDA, which has the wl1271 device hardwired to. The wl1271 is a 4-wire, 1.8V, embedded SDIO WLAN device with an external IRQ line, and power-controlled by a GPIO-based fixed regulator. Based on the patch for mmc3/wl1271 device support for zoom by Ohad Ben-Cohen Signed-off-by: Panduranga Mallireddy Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-omap4panda.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index d56bef15d3c..3dd241b9515 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include @@ -47,6 +48,7 @@ #define GPIO_HUB_POWER 1 #define GPIO_HUB_NRESET 62 #define GPIO_WIFI_PMENA 43 +#define GPIO_WIFI_IRQ 53 static struct gpio_led gpio_leds[] = { { @@ -163,6 +165,15 @@ static struct omap2_hsmmc_info mmc[] = { .gpio_wp = -EINVAL, .gpio_cd = -EINVAL, }, + { + .name = "wl1271", + .mmc = 5, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD, + .gpio_wp = -EINVAL, + .gpio_cd = -EINVAL, + .ocr_mask = MMC_VDD_165_195, + .nonremovable = true, + }, {} /* Terminator */ }; @@ -204,6 +215,12 @@ static struct platform_device omap_vwlan_device = { }, }; +struct wl12xx_platform_data omap_panda_wlan_data __initdata = { + .irq = OMAP_GPIO_IRQ(GPIO_WIFI_IRQ), + /* PANDA ref clock is 38.4 MHz */ + .board_ref_clock = 2, +}; + static int omap4_twl6030_hsmmc_late_init(struct device *dev) { int ret = 0; @@ -447,6 +464,9 @@ static void __init omap4_panda_init(void) package = OMAP_PACKAGE_CBL; omap4_mux_init(board_mux, package); + if (wl12xx_set_platform_data(&omap_panda_wlan_data)) + pr_err("error setting wl12xx data\n"); + omap4_panda_i2c_init(); platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices)); platform_device_register(&omap_vwlan_device); -- cgit v1.2.3-18-g5258 From 7715db5aeca09d853be4f2eb0bc688a970220621 Mon Sep 17 00:00:00 2001 From: Kishore Kadiyala Date: Tue, 15 Feb 2011 03:40:36 -0500 Subject: OMAP: hsmmc: Enable MMC4 and MMC5 on OMAP4 platforms OMAP4 supports up to 5 MMC controllers, but only 3 of these were initialized. MMC5 is used by wl12xx chip. So initialize MMC4 and MMC5. Signed-off-by: Kishore Kadiyala Signed-off-by: Panduranga Mallireddy Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/hsmmc.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 34272e4863f..5496bc7d40a 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -350,6 +350,11 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) mmc->slots[0].after_set_reg = NULL; } break; + case 4: + case 5: + mmc->slots[0].before_set_reg = NULL; + mmc->slots[0].after_set_reg = NULL; + break; default: pr_err("MMC%d configuration not supported!\n", c->mmc); kfree(mmc); -- cgit v1.2.3-18-g5258 From f6b0fa02e8b0708d17d631afce456524eadf87ff Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 6 Feb 2011 15:48:39 +0000 Subject: ARM: pm: add generic CPU suspend/resume support This adds core support for saving and restoring CPU coprocessor registers for suspend/resume support. This contains support for suspend with ARM920, ARM926, SA11x0, PXA25x, PXA27x, PXA3xx, V6 and V7 CPUs. Tested on Assabet and Tegra 2. Tested-by: Colin Cross Tested-by: Kukjin Kim Signed-off-by: Russell King --- arch/arm/include/asm/glue-proc.h | 3 + arch/arm/include/asm/proc-fns.h | 7 +++ arch/arm/kernel/Makefile | 1 + arch/arm/kernel/asm-offsets.c | 9 +++ arch/arm/kernel/sleep.S | 109 ++++++++++++++++++++++++++++++++++++ arch/arm/mm/proc-arm1020.S | 3 + arch/arm/mm/proc-arm1020e.S | 3 + arch/arm/mm/proc-arm1022.S | 3 + arch/arm/mm/proc-arm1026.S | 3 + arch/arm/mm/proc-arm6_7.S | 6 ++ arch/arm/mm/proc-arm720.S | 3 + arch/arm/mm/proc-arm740.S | 3 + arch/arm/mm/proc-arm7tdmi.S | 3 + arch/arm/mm/proc-arm920.S | 37 +++++++++++++ arch/arm/mm/proc-arm922.S | 3 + arch/arm/mm/proc-arm925.S | 3 + arch/arm/mm/proc-arm926.S | 37 +++++++++++++ arch/arm/mm/proc-arm940.S | 3 + arch/arm/mm/proc-arm946.S | 3 + arch/arm/mm/proc-arm9tdmi.S | 3 + arch/arm/mm/proc-fa526.S | 3 + arch/arm/mm/proc-feroceon.S | 3 + arch/arm/mm/proc-mohawk.S | 3 + arch/arm/mm/proc-sa110.S | 3 + arch/arm/mm/proc-sa1100.S | 39 +++++++++++++ arch/arm/mm/proc-v6.S | 50 +++++++++++++++++ arch/arm/mm/proc-v7.S | 116 +++++++++++++++++++++++++++++---------- arch/arm/mm/proc-xsc3.S | 48 +++++++++++++++- arch/arm/mm/proc-xscale.S | 45 ++++++++++++++- 29 files changed, 522 insertions(+), 33 deletions(-) create mode 100644 arch/arm/kernel/sleep.S (limited to 'arch') diff --git a/arch/arm/include/asm/glue-proc.h b/arch/arm/include/asm/glue-proc.h index e3bf443f2d1..6469521d092 100644 --- a/arch/arm/include/asm/glue-proc.h +++ b/arch/arm/include/asm/glue-proc.h @@ -256,6 +256,9 @@ #define cpu_dcache_clean_area __glue(CPU_NAME,_dcache_clean_area) #define cpu_do_switch_mm __glue(CPU_NAME,_switch_mm) #define cpu_set_pte_ext __glue(CPU_NAME,_set_pte_ext) +#define cpu_suspend_size __glue(CPU_NAME,_suspend_size) +#define cpu_do_suspend __glue(CPU_NAME,_do_suspend) +#define cpu_do_resume __glue(CPU_NAME,_do_resume) #endif #endif diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h index 69802150be2..8ec535e11fd 100644 --- a/arch/arm/include/asm/proc-fns.h +++ b/arch/arm/include/asm/proc-fns.h @@ -66,6 +66,11 @@ extern struct processor { * ignore 'ext'. */ void (*set_pte_ext)(pte_t *ptep, pte_t pte, unsigned int ext); + + /* Suspend/resume */ + unsigned int suspend_size; + void (*do_suspend)(void *); + void (*do_resume)(void *); } processor; #ifndef MULTI_CPU @@ -86,6 +91,8 @@ extern void cpu_reset(unsigned long addr) __attribute__((noreturn)); #define cpu_do_switch_mm(pgd,mm) processor.switch_mm(pgd,mm) #endif +extern void cpu_resume(void); + #include #ifdef CONFIG_MMU diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 185ee822c93..74554f1742d 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -29,6 +29,7 @@ obj-$(CONFIG_MODULES) += armksyms.o module.o obj-$(CONFIG_ARTHUR) += arthur.o obj-$(CONFIG_ISA_DMA) += dma-isa.o obj-$(CONFIG_PCI) += bios32.o isa.o +obj-$(CONFIG_PM) += sleep.o obj-$(CONFIG_HAVE_SCHED_CLOCK) += sched_clock.o obj-$(CONFIG_SMP) += smp.o smp_tlb.o obj-$(CONFIG_HAVE_ARM_SCU) += smp_scu.o diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index 5302a917271..927522cfc12 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include @@ -115,6 +116,14 @@ int main(void) #endif #ifdef MULTI_PABORT DEFINE(PROCESSOR_PABT_FUNC, offsetof(struct processor, _prefetch_abort)); +#endif +#ifdef MULTI_CPU + DEFINE(CPU_SLEEP_SIZE, offsetof(struct processor, suspend_size)); + DEFINE(CPU_DO_SUSPEND, offsetof(struct processor, do_suspend)); + DEFINE(CPU_DO_RESUME, offsetof(struct processor, do_resume)); +#endif +#ifdef MULTI_CACHE + DEFINE(CACHE_FLUSH_KERN_ALL, offsetof(struct cpu_cache_fns, flush_kern_all)); #endif BLANK(); DEFINE(DMA_BIDIRECTIONAL, DMA_BIDIRECTIONAL); diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S new file mode 100644 index 00000000000..2ba17946619 --- /dev/null +++ b/arch/arm/kernel/sleep.S @@ -0,0 +1,109 @@ +#include +#include +#include +#include +#include +#include + .text + +/* + * Save CPU state for a suspend + * r1 = v:p offset + * r3 = virtual return function + * Note: sp is decremented to allocate space for CPU state on stack + * r0-r3,r9,r10,lr corrupted + */ +ENTRY(cpu_suspend) + mov r9, lr +#ifdef MULTI_CPU + ldr r10, =processor + mov r2, sp @ current virtual SP + ldr r0, [r10, #CPU_SLEEP_SIZE] @ size of CPU sleep state + ldr ip, [r10, #CPU_DO_RESUME] @ virtual resume function + sub sp, sp, r0 @ allocate CPU state on stack + mov r0, sp @ save pointer + add ip, ip, r1 @ convert resume fn to phys + stmfd sp!, {r1, r2, r3, ip} @ save v:p, virt SP, retfn, phys resume fn + ldr r3, =sleep_save_sp + add r2, sp, r1 @ convert SP to phys + str r2, [r3] @ save phys SP + mov lr, pc + ldr pc, [r10, #CPU_DO_SUSPEND] @ save CPU state +#else + mov r2, sp @ current virtual SP + ldr r0, =cpu_suspend_size + sub sp, sp, r0 @ allocate CPU state on stack + mov r0, sp @ save pointer + stmfd sp!, {r1, r2, r3} @ save v:p, virt SP, return fn + ldr r3, =sleep_save_sp + add r2, sp, r1 @ convert SP to phys + str r2, [r3] @ save phys SP + bl cpu_do_suspend +#endif + + @ flush data cache +#ifdef MULTI_CACHE + ldr r10, =cpu_cache + mov lr, r9 + ldr pc, [r10, #CACHE_FLUSH_KERN_ALL] +#else + mov lr, r9 + b __cpuc_flush_kern_all +#endif +ENDPROC(cpu_suspend) + .ltorg + +/* + * r0 = control register value + * r1 = v:p offset (preserved by cpu_do_resume) + * r2 = phys page table base + * r3 = L1 section flags + */ +ENTRY(cpu_resume_mmu) + adr r4, cpu_resume_turn_mmu_on + mov r4, r4, lsr #20 + orr r3, r3, r4, lsl #20 + ldr r5, [r2, r4, lsl #2] @ save old mapping + str r3, [r2, r4, lsl #2] @ setup 1:1 mapping for mmu code + sub r2, r2, r1 + ldr r3, =cpu_resume_after_mmu + bic r1, r0, #CR_C @ ensure D-cache is disabled + b cpu_resume_turn_mmu_on +ENDPROC(cpu_resume_mmu) + .ltorg + .align 5 +cpu_resume_turn_mmu_on: + mcr p15, 0, r1, c1, c0, 0 @ turn on MMU, I-cache, etc + mrc p15, 0, r1, c0, c0, 0 @ read id reg + mov r1, r1 + mov r1, r1 + mov pc, r3 @ jump to virtual address +ENDPROC(cpu_resume_turn_mmu_on) +cpu_resume_after_mmu: + str r5, [r2, r4, lsl #2] @ restore old mapping + mcr p15, 0, r0, c1, c0, 0 @ turn on D-cache + mov pc, lr +ENDPROC(cpu_resume_after_mmu) + +/* + * Note: Yes, part of the following code is located into the .data section. + * This is to allow sleep_save_sp to be accessed with a relative load + * while we can't rely on any MMU translation. We could have put + * sleep_save_sp in the .text section as well, but some setups might + * insist on it to be truly read-only. + */ + .data + .align +ENTRY(cpu_resume) + ldr r0, sleep_save_sp @ stack phys addr + msr cpsr_c, #PSR_I_BIT | PSR_F_BIT | SVC_MODE @ set SVC, irqs off +#ifdef MULTI_CPU + ldmia r0!, {r1, sp, lr, pc} @ load v:p, stack, return fn, resume fn +#else + ldmia r0!, {r1, sp, lr} @ load v:p, stack, return fn + b cpu_do_resume +#endif +ENDPROC(cpu_resume) + +sleep_save_sp: + .word 0 @ preserve stack phys ptr here diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index bcf748d9f4e..226e3d8351c 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -493,6 +493,9 @@ arm1020_processor_functions: .word cpu_arm1020_dcache_clean_area .word cpu_arm1020_switch_mm .word cpu_arm1020_set_pte_ext + .word 0 + .word 0 + .word 0 .size arm1020_processor_functions, . - arm1020_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index ab7ec26657e..86d9c2cf0bc 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -474,6 +474,9 @@ arm1020e_processor_functions: .word cpu_arm1020e_dcache_clean_area .word cpu_arm1020e_switch_mm .word cpu_arm1020e_set_pte_ext + .word 0 + .word 0 + .word 0 .size arm1020e_processor_functions, . - arm1020e_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S index 831c5e54e22..83d3dd34f84 100644 --- a/arch/arm/mm/proc-arm1022.S +++ b/arch/arm/mm/proc-arm1022.S @@ -457,6 +457,9 @@ arm1022_processor_functions: .word cpu_arm1022_dcache_clean_area .word cpu_arm1022_switch_mm .word cpu_arm1022_set_pte_ext + .word 0 + .word 0 + .word 0 .size arm1022_processor_functions, . - arm1022_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S index e3f7e9a166b..686043ee728 100644 --- a/arch/arm/mm/proc-arm1026.S +++ b/arch/arm/mm/proc-arm1026.S @@ -452,6 +452,9 @@ arm1026_processor_functions: .word cpu_arm1026_dcache_clean_area .word cpu_arm1026_switch_mm .word cpu_arm1026_set_pte_ext + .word 0 + .word 0 + .word 0 .size arm1026_processor_functions, . - arm1026_processor_functions .section .rodata diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S index 6a7be1863ed..5f79dc4ce3f 100644 --- a/arch/arm/mm/proc-arm6_7.S +++ b/arch/arm/mm/proc-arm6_7.S @@ -284,6 +284,9 @@ ENTRY(arm6_processor_functions) .word cpu_arm6_dcache_clean_area .word cpu_arm6_switch_mm .word cpu_arm6_set_pte_ext + .word 0 + .word 0 + .word 0 .size arm6_processor_functions, . - arm6_processor_functions /* @@ -301,6 +304,9 @@ ENTRY(arm7_processor_functions) .word cpu_arm7_dcache_clean_area .word cpu_arm7_switch_mm .word cpu_arm7_set_pte_ext + .word 0 + .word 0 + .word 0 .size arm7_processor_functions, . - arm7_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index c285395f44b..665266da143 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -185,6 +185,9 @@ ENTRY(arm720_processor_functions) .word cpu_arm720_dcache_clean_area .word cpu_arm720_switch_mm .word cpu_arm720_set_pte_ext + .word 0 + .word 0 + .word 0 .size arm720_processor_functions, . - arm720_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S index 38b27dcba72..6f9d12effee 100644 --- a/arch/arm/mm/proc-arm740.S +++ b/arch/arm/mm/proc-arm740.S @@ -130,6 +130,9 @@ ENTRY(arm740_processor_functions) .word cpu_arm740_dcache_clean_area .word cpu_arm740_switch_mm .word 0 @ cpu_*_set_pte + .word 0 + .word 0 + .word 0 .size arm740_processor_functions, . - arm740_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S index 0c9786de20a..e4c165ca669 100644 --- a/arch/arm/mm/proc-arm7tdmi.S +++ b/arch/arm/mm/proc-arm7tdmi.S @@ -70,6 +70,9 @@ ENTRY(arm7tdmi_processor_functions) .word cpu_arm7tdmi_dcache_clean_area .word cpu_arm7tdmi_switch_mm .word 0 @ cpu_*_set_pte + .word 0 + .word 0 + .word 0 .size arm7tdmi_processor_functions, . - arm7tdmi_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 6109f278a90..219980ec8b6 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -387,6 +387,40 @@ ENTRY(cpu_arm920_set_pte_ext) #endif mov pc, lr +/* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */ +.globl cpu_arm920_suspend_size +.equ cpu_arm920_suspend_size, 4 * 3 +#ifdef CONFIG_PM +ENTRY(cpu_arm920_do_suspend) + stmfd sp!, {r4 - r7, lr} + mrc p15, 0, r4, c13, c0, 0 @ PID + mrc p15, 0, r5, c3, c0, 0 @ Domain ID + mrc p15, 0, r6, c2, c0, 0 @ TTB address + mrc p15, 0, r7, c1, c0, 0 @ Control register + stmia r0, {r4 - r7} + ldmfd sp!, {r4 - r7, pc} +ENDPROC(cpu_arm920_do_suspend) + +ENTRY(cpu_arm920_do_resume) + mov ip, #0 + mcr p15, 0, ip, c8, c7, 0 @ invalidate I+D TLBs + mcr p15, 0, ip, c7, c7, 0 @ invalidate I+D caches + ldmia r0, {r4 - r7} + mcr p15, 0, r4, c13, c0, 0 @ PID + mcr p15, 0, r5, c3, c0, 0 @ Domain ID + mcr p15, 0, r6, c2, c0, 0 @ TTB address + mov r0, r7 @ control register + mov r2, r6, lsr #14 @ get TTB0 base + mov r2, r2, lsl #14 + ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \ + PMD_SECT_CACHEABLE | PMD_BIT4 | PMD_SECT_AP_WRITE + b cpu_resume_mmu +ENDPROC(cpu_arm920_do_resume) +#else +#define cpu_arm920_do_suspend 0 +#define cpu_arm920_do_resume 0 +#endif + __CPUINIT .type __arm920_setup, #function @@ -432,6 +466,9 @@ arm920_processor_functions: .word cpu_arm920_dcache_clean_area .word cpu_arm920_switch_mm .word cpu_arm920_set_pte_ext + .word cpu_arm920_suspend_size + .word cpu_arm920_do_suspend + .word cpu_arm920_do_resume .size arm920_processor_functions, . - arm920_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S index bb2f0f46a5e..36154b1e792 100644 --- a/arch/arm/mm/proc-arm922.S +++ b/arch/arm/mm/proc-arm922.S @@ -436,6 +436,9 @@ arm922_processor_functions: .word cpu_arm922_dcache_clean_area .word cpu_arm922_switch_mm .word cpu_arm922_set_pte_ext + .word 0 + .word 0 + .word 0 .size arm922_processor_functions, . - arm922_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index c13e01accfe..89c5e0009c4 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -503,6 +503,9 @@ arm925_processor_functions: .word cpu_arm925_dcache_clean_area .word cpu_arm925_switch_mm .word cpu_arm925_set_pte_ext + .word 0 + .word 0 + .word 0 .size arm925_processor_functions, . - arm925_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index 42eb4315740..6a4bdb2c94a 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -401,6 +401,40 @@ ENTRY(cpu_arm926_set_pte_ext) #endif mov pc, lr +/* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */ +.globl cpu_arm926_suspend_size +.equ cpu_arm926_suspend_size, 4 * 3 +#ifdef CONFIG_PM +ENTRY(cpu_arm926_do_suspend) + stmfd sp!, {r4 - r7, lr} + mrc p15, 0, r4, c13, c0, 0 @ PID + mrc p15, 0, r5, c3, c0, 0 @ Domain ID + mrc p15, 0, r6, c2, c0, 0 @ TTB address + mrc p15, 0, r7, c1, c0, 0 @ Control register + stmia r0, {r4 - r7} + ldmfd sp!, {r4 - r7, pc} +ENDPROC(cpu_arm926_do_suspend) + +ENTRY(cpu_arm926_do_resume) + mov ip, #0 + mcr p15, 0, ip, c8, c7, 0 @ invalidate I+D TLBs + mcr p15, 0, ip, c7, c7, 0 @ invalidate I+D caches + ldmia r0, {r4 - r7} + mcr p15, 0, r4, c13, c0, 0 @ PID + mcr p15, 0, r5, c3, c0, 0 @ Domain ID + mcr p15, 0, r6, c2, c0, 0 @ TTB address + mov r0, r7 @ control register + mov r2, r6, lsr #14 @ get TTB0 base + mov r2, r2, lsl #14 + ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \ + PMD_SECT_CACHEABLE | PMD_BIT4 | PMD_SECT_AP_WRITE + b cpu_resume_mmu +ENDPROC(cpu_arm926_do_resume) +#else +#define cpu_arm926_do_suspend 0 +#define cpu_arm926_do_resume 0 +#endif + __CPUINIT .type __arm926_setup, #function @@ -456,6 +490,9 @@ arm926_processor_functions: .word cpu_arm926_dcache_clean_area .word cpu_arm926_switch_mm .word cpu_arm926_set_pte_ext + .word cpu_arm926_suspend_size + .word cpu_arm926_do_suspend + .word cpu_arm926_do_resume .size arm926_processor_functions, . - arm926_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S index 7b11cdb9935..26aea3f71c2 100644 --- a/arch/arm/mm/proc-arm940.S +++ b/arch/arm/mm/proc-arm940.S @@ -363,6 +363,9 @@ ENTRY(arm940_processor_functions) .word cpu_arm940_dcache_clean_area .word cpu_arm940_switch_mm .word 0 @ cpu_*_set_pte + .word 0 + .word 0 + .word 0 .size arm940_processor_functions, . - arm940_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S index 1a5bbf08034..8063345406f 100644 --- a/arch/arm/mm/proc-arm946.S +++ b/arch/arm/mm/proc-arm946.S @@ -419,6 +419,9 @@ ENTRY(arm946_processor_functions) .word cpu_arm946_dcache_clean_area .word cpu_arm946_switch_mm .word 0 @ cpu_*_set_pte + .word 0 + .word 0 + .word 0 .size arm946_processor_functions, . - arm946_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S index db67e3134d7..7b7ebd4d096 100644 --- a/arch/arm/mm/proc-arm9tdmi.S +++ b/arch/arm/mm/proc-arm9tdmi.S @@ -70,6 +70,9 @@ ENTRY(arm9tdmi_processor_functions) .word cpu_arm9tdmi_dcache_clean_area .word cpu_arm9tdmi_switch_mm .word 0 @ cpu_*_set_pte + .word 0 + .word 0 + .word 0 .size arm9tdmi_processor_functions, . - arm9tdmi_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S index 7c9ad621f0e..fc2a4ae15cf 100644 --- a/arch/arm/mm/proc-fa526.S +++ b/arch/arm/mm/proc-fa526.S @@ -195,6 +195,9 @@ fa526_processor_functions: .word cpu_fa526_dcache_clean_area .word cpu_fa526_switch_mm .word cpu_fa526_set_pte_ext + .word 0 + .word 0 + .word 0 .size fa526_processor_functions, . - fa526_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S index b4597edbff9..d3883eed7a4 100644 --- a/arch/arm/mm/proc-feroceon.S +++ b/arch/arm/mm/proc-feroceon.S @@ -554,6 +554,9 @@ feroceon_processor_functions: .word cpu_feroceon_dcache_clean_area .word cpu_feroceon_switch_mm .word cpu_feroceon_set_pte_ext + .word 0 + .word 0 + .word 0 .size feroceon_processor_functions, . - feroceon_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S index 4458ee6aa71..9d4f2ae6337 100644 --- a/arch/arm/mm/proc-mohawk.S +++ b/arch/arm/mm/proc-mohawk.S @@ -388,6 +388,9 @@ mohawk_processor_functions: .word cpu_mohawk_dcache_clean_area .word cpu_mohawk_switch_mm .word cpu_mohawk_set_pte_ext + .word 0 + .word 0 + .word 0 .size mohawk_processor_functions, . - mohawk_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S index 5aa8d59c2e8..46f09ed16b9 100644 --- a/arch/arm/mm/proc-sa110.S +++ b/arch/arm/mm/proc-sa110.S @@ -203,6 +203,9 @@ ENTRY(sa110_processor_functions) .word cpu_sa110_dcache_clean_area .word cpu_sa110_switch_mm .word cpu_sa110_set_pte_ext + .word 0 + .word 0 + .word 0 .size sa110_processor_functions, . - sa110_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index 2ac4e6f1071..74483d1977f 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -169,6 +169,42 @@ ENTRY(cpu_sa1100_set_pte_ext) #endif mov pc, lr +.globl cpu_sa1100_suspend_size +.equ cpu_sa1100_suspend_size, 4*4 +#ifdef CONFIG_PM +ENTRY(cpu_sa1100_do_suspend) + stmfd sp!, {r4 - r7, lr} + mrc p15, 0, r4, c3, c0, 0 @ domain ID + mrc p15, 0, r5, c2, c0, 0 @ translation table base addr + mrc p15, 0, r6, c13, c0, 0 @ PID + mrc p15, 0, r7, c1, c0, 0 @ control reg + stmia r0, {r4 - r7} @ store cp regs + ldmfd sp!, {r4 - r7, pc} +ENDPROC(cpu_sa1100_do_suspend) + +ENTRY(cpu_sa1100_do_resume) + ldmia r0, {r4 - r7} @ load cp regs + mov r1, #0 + mcr p15, 0, r1, c8, c7, 0 @ flush I+D TLBs + mcr p15, 0, r1, c7, c7, 0 @ flush I&D cache + mcr p15, 0, r1, c9, c0, 0 @ invalidate RB + mcr p15, 0, r1, c9, c0, 5 @ allow user space to use RB + + mcr p15, 0, r4, c3, c0, 0 @ domain ID + mcr p15, 0, r5, c2, c0, 0 @ translation table base addr + mcr p15, 0, r6, c13, c0, 0 @ PID + mov r0, r7 @ control register + mov r2, r5, lsr #14 @ get TTB0 base + mov r2, r2, lsl #14 + ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \ + PMD_SECT_CACHEABLE | PMD_SECT_AP_WRITE + b cpu_resume_mmu +ENDPROC(cpu_sa1100_do_resume) +#else +#define cpu_sa1100_do_suspend 0 +#define cpu_sa1100_do_resume 0 +#endif + __CPUINIT .type __sa1100_setup, #function @@ -218,6 +254,9 @@ ENTRY(sa1100_processor_functions) .word cpu_sa1100_dcache_clean_area .word cpu_sa1100_switch_mm .word cpu_sa1100_set_pte_ext + .word cpu_sa1100_suspend_size + .word cpu_sa1100_do_suspend + .word cpu_sa1100_do_resume .size sa1100_processor_functions, . - sa1100_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 59a7e1ffe7b..832b6bdc192 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -121,6 +121,53 @@ ENTRY(cpu_v6_set_pte_ext) #endif mov pc, lr +/* Suspend/resume support: taken from arch/arm/mach-s3c64xx/sleep.S */ +.globl cpu_v6_suspend_size +.equ cpu_v6_suspend_size, 4 * 8 +#ifdef CONFIG_PM +ENTRY(cpu_v6_do_suspend) + stmfd sp!, {r4 - r11, lr} + mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID + mrc p15, 0, r5, c13, c0, 1 @ Context ID + mrc p15, 0, r6, c3, c0, 0 @ Domain ID + mrc p15, 0, r7, c2, c0, 0 @ Translation table base 0 + mrc p15, 0, r8, c2, c0, 1 @ Translation table base 1 + mrc p15, 0, r9, c1, c0, 1 @ auxillary control register + mrc p15, 0, r10, c1, c0, 2 @ co-processor access control + mrc p15, 0, r11, c1, c0, 0 @ control register + stmia r0, {r4 - r11} + ldmfd sp!, {r4- r11, pc} +ENDPROC(cpu_v6_do_suspend) + +ENTRY(cpu_v6_do_resume) + mov ip, #0 + mcr p15, 0, ip, c7, c14, 0 @ clean+invalidate D cache + mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache + mcr p15, 0, ip, c7, c15, 0 @ clean+invalidate cache + mcr p15, 0, ip, c7, c10, 4 @ drain write buffer + ldmia r0, {r4 - r11} + mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID + mcr p15, 0, r5, c13, c0, 1 @ Context ID + mcr p15, 0, r6, c3, c0, 0 @ Domain ID + mcr p15, 0, r7, c2, c0, 0 @ Translation table base 0 + mcr p15, 0, r8, c2, c0, 1 @ Translation table base 1 + mcr p15, 0, r9, c1, c0, 1 @ auxillary control register + mcr p15, 0, r10, c1, c0, 2 @ co-processor access control + mcr p15, 0, ip, c2, c0, 2 @ TTB control register + mcr p15, 0, ip, c7, c5, 4 @ ISB + mov r0, r11 @ control register + mov r2, r7, lsr #14 @ get TTB0 base + mov r2, r2, lsl #14 + ldr r3, cpu_resume_l1_flags + b cpu_resume_mmu +ENDPROC(cpu_v6_do_resume) +cpu_resume_l1_flags: + ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_SMP) + ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_UP) +#else +#define cpu_v6_do_suspend 0 +#define cpu_v6_do_resume 0 +#endif .type cpu_v6_name, #object @@ -206,6 +253,9 @@ ENTRY(v6_processor_functions) .word cpu_v6_dcache_clean_area .word cpu_v6_switch_mm .word cpu_v6_set_pte_ext + .word cpu_v6_suspend_size + .word cpu_v6_do_suspend + .word cpu_v6_do_resume .size v6_processor_functions, . - v6_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 0c1172b56b4..a5187ddfb26 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -171,6 +171,87 @@ cpu_v7_name: .ascii "ARMv7 Processor" .align + /* + * Memory region attributes with SCTLR.TRE=1 + * + * n = TEX[0],C,B + * TR = PRRR[2n+1:2n] - memory type + * IR = NMRR[2n+1:2n] - inner cacheable property + * OR = NMRR[2n+17:2n+16] - outer cacheable property + * + * n TR IR OR + * UNCACHED 000 00 + * BUFFERABLE 001 10 00 00 + * WRITETHROUGH 010 10 10 10 + * WRITEBACK 011 10 11 11 + * reserved 110 + * WRITEALLOC 111 10 01 01 + * DEV_SHARED 100 01 + * DEV_NONSHARED 100 01 + * DEV_WC 001 10 + * DEV_CACHED 011 10 + * + * Other attributes: + * + * DS0 = PRRR[16] = 0 - device shareable property + * DS1 = PRRR[17] = 1 - device shareable property + * NS0 = PRRR[18] = 0 - normal shareable property + * NS1 = PRRR[19] = 1 - normal shareable property + * NOS = PRRR[24+n] = 1 - not outer shareable + */ +.equ PRRR, 0xff0a81a8 +.equ NMRR, 0x40e040e0 + +/* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */ +.globl cpu_v7_suspend_size +.equ cpu_v7_suspend_size, 4 * 8 +#ifdef CONFIG_PM +ENTRY(cpu_v7_do_suspend) + stmfd sp!, {r4 - r11, lr} + mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID + mrc p15, 0, r5, c13, c0, 1 @ Context ID + mrc p15, 0, r6, c3, c0, 0 @ Domain ID + mrc p15, 0, r7, c2, c0, 0 @ TTB 0 + mrc p15, 0, r8, c2, c0, 1 @ TTB 1 + mrc p15, 0, r9, c1, c0, 0 @ Control register + mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register + mrc p15, 0, r11, c1, c0, 2 @ Co-processor access control + stmia r0, {r4 - r11} + ldmfd sp!, {r4 - r11, pc} +ENDPROC(cpu_v7_do_suspend) + +ENTRY(cpu_v7_do_resume) + mov ip, #0 + mcr p15, 0, ip, c8, c7, 0 @ invalidate TLBs + mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache + ldmia r0, {r4 - r11} + mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID + mcr p15, 0, r5, c13, c0, 1 @ Context ID + mcr p15, 0, r6, c3, c0, 0 @ Domain ID + mcr p15, 0, r7, c2, c0, 0 @ TTB 0 + mcr p15, 0, r8, c2, c0, 1 @ TTB 1 + mcr p15, 0, ip, c2, c0, 2 @ TTB control register + mcr p15, 0, r10, c1, c0, 1 @ Auxillary control register + mcr p15, 0, r11, c1, c0, 2 @ Co-processor access control + ldr r4, =PRRR @ PRRR + ldr r5, =NMRR @ NMRR + mcr p15, 0, r4, c10, c2, 0 @ write PRRR + mcr p15, 0, r5, c10, c2, 1 @ write NMRR + isb + mov r0, r9 @ control register + mov r2, r7, lsr #14 @ get TTB0 base + mov r2, r2, lsl #14 + ldr r3, cpu_resume_l1_flags + b cpu_resume_mmu +ENDPROC(cpu_v7_do_resume) +cpu_resume_l1_flags: + ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_SMP) + ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_UP) +#else +#define cpu_v7_do_suspend 0 +#define cpu_v7_do_resume 0 +#endif + __CPUINIT /* @@ -276,36 +357,8 @@ __v7_setup: ALT_SMP(orr r4, r4, #TTB_FLAGS_SMP) ALT_UP(orr r4, r4, #TTB_FLAGS_UP) mcr p15, 0, r4, c2, c0, 1 @ load TTB1 - /* - * Memory region attributes with SCTLR.TRE=1 - * - * n = TEX[0],C,B - * TR = PRRR[2n+1:2n] - memory type - * IR = NMRR[2n+1:2n] - inner cacheable property - * OR = NMRR[2n+17:2n+16] - outer cacheable property - * - * n TR IR OR - * UNCACHED 000 00 - * BUFFERABLE 001 10 00 00 - * WRITETHROUGH 010 10 10 10 - * WRITEBACK 011 10 11 11 - * reserved 110 - * WRITEALLOC 111 10 01 01 - * DEV_SHARED 100 01 - * DEV_NONSHARED 100 01 - * DEV_WC 001 10 - * DEV_CACHED 011 10 - * - * Other attributes: - * - * DS0 = PRRR[16] = 0 - device shareable property - * DS1 = PRRR[17] = 1 - device shareable property - * NS0 = PRRR[18] = 0 - normal shareable property - * NS1 = PRRR[19] = 1 - normal shareable property - * NOS = PRRR[24+n] = 1 - not outer shareable - */ - ldr r5, =0xff0a81a8 @ PRRR - ldr r6, =0x40e040e0 @ NMRR + ldr r5, =PRRR @ PRRR + ldr r6, =NMRR @ NMRR mcr p15, 0, r5, c10, c2, 0 @ write PRRR mcr p15, 0, r6, c10, c2, 1 @ write NMRR #endif @@ -351,6 +404,9 @@ ENTRY(v7_processor_functions) .word cpu_v7_dcache_clean_area .word cpu_v7_switch_mm .word cpu_v7_set_pte_ext + .word 0 + .word 0 + .word 0 .size v7_processor_functions, . - v7_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index ec26355cb7c..63d8b2044e8 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -413,9 +413,52 @@ ENTRY(cpu_xsc3_set_pte_ext) mov pc, lr .ltorg - .align +.globl cpu_xsc3_suspend_size +.equ cpu_xsc3_suspend_size, 4 * 8 +#ifdef CONFIG_PM +ENTRY(cpu_xsc3_do_suspend) + stmfd sp!, {r4 - r10, lr} + mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode + mrc p15, 0, r5, c15, c1, 0 @ CP access reg + mrc p15, 0, r6, c13, c0, 0 @ PID + mrc p15, 0, r7, c3, c0, 0 @ domain ID + mrc p15, 0, r8, c2, c0, 0 @ translation table base addr + mrc p15, 0, r9, c1, c0, 1 @ auxiliary control reg + mrc p15, 0, r10, c1, c0, 0 @ control reg + bic r4, r4, #2 @ clear frequency change bit + stmia r0, {r1, r4 - r10} @ store v:p offset + cp regs + ldmia sp!, {r4 - r10, pc} +ENDPROC(cpu_xsc3_do_suspend) + +ENTRY(cpu_xsc3_do_resume) + ldmia r0, {r1, r4 - r10} @ load v:p offset + cp regs + mov ip, #0 + mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB + mcr p15, 0, ip, c7, c10, 4 @ drain write (&fill) buffer + mcr p15, 0, ip, c7, c5, 4 @ flush prefetch buffer + mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs + mcr p14, 0, r4, c6, c0, 0 @ clock configuration, turbo mode. + mcr p15, 0, r5, c15, c1, 0 @ CP access reg + mcr p15, 0, r6, c13, c0, 0 @ PID + mcr p15, 0, r7, c3, c0, 0 @ domain ID + mcr p15, 0, r8, c2, c0, 0 @ translation table base addr + mcr p15, 0, r9, c1, c0, 1 @ auxiliary control reg + + @ temporarily map resume_turn_on_mmu into the page table, + @ otherwise prefetch abort occurs after MMU is turned on + mov r0, r10 @ control register + mov r2, r8, lsr #14 @ get TTB0 base + mov r2, r2, lsl #14 + ldr r3, =0x542e @ section flags + b cpu_resume_mmu +ENDPROC(cpu_xsc3_do_resume) +#else +#define cpu_xsc3_do_suspend 0 +#define cpu_xsc3_do_resume 0 +#endif + __CPUINIT .type __xsc3_setup, #function @@ -476,6 +519,9 @@ ENTRY(xsc3_processor_functions) .word cpu_xsc3_dcache_clean_area .word cpu_xsc3_switch_mm .word cpu_xsc3_set_pte_ext + .word cpu_xsc3_suspend_size + .word cpu_xsc3_do_suspend + .word cpu_xsc3_do_resume .size xsc3_processor_functions, . - xsc3_processor_functions .section ".rodata" diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index 5a37c5e45c4..086038cd86a 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -513,11 +513,49 @@ ENTRY(cpu_xscale_set_pte_ext) xscale_set_pte_ext_epilogue mov pc, lr - .ltorg - .align +.globl cpu_xscale_suspend_size +.equ cpu_xscale_suspend_size, 4 * 7 +#ifdef CONFIG_PM +ENTRY(cpu_xscale_do_suspend) + stmfd sp!, {r4 - r10, lr} + mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode + mrc p15, 0, r5, c15, c1, 0 @ CP access reg + mrc p15, 0, r6, c13, c0, 0 @ PID + mrc p15, 0, r7, c3, c0, 0 @ domain ID + mrc p15, 0, r8, c2, c0, 0 @ translation table base addr + mrc p15, 0, r9, c1, c1, 0 @ auxiliary control reg + mrc p15, 0, r10, c1, c0, 0 @ control reg + bic r4, r4, #2 @ clear frequency change bit + stmia r0, {r4 - r10} @ store cp regs + ldmfd sp!, {r4 - r10, pc} +ENDPROC(cpu_xscale_do_suspend) + +ENTRY(cpu_xscale_do_resume) + ldmia r0, {r4 - r10} @ load cp regs + mov ip, #0 + mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs + mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB + mcr p14, 0, r4, c6, c0, 0 @ clock configuration, turbo mode. + mcr p15, 0, r5, c15, c1, 0 @ CP access reg + mcr p15, 0, r6, c13, c0, 0 @ PID + mcr p15, 0, r7, c3, c0, 0 @ domain ID + mcr p15, 0, r8, c2, c0, 0 @ translation table base addr + mcr p15, 0, r9, c1, c1, 0 @ auxiliary control reg + mov r0, r10 @ control register + mov r2, r8, lsr #14 @ get TTB0 base + mov r2, r2, lsl #14 + ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \ + PMD_SECT_CACHEABLE | PMD_SECT_AP_WRITE + b cpu_resume_mmu +ENDPROC(cpu_xscale_do_resume) +#else +#define cpu_xscale_do_suspend 0 +#define cpu_xscale_do_resume 0 +#endif + __CPUINIT .type __xscale_setup, #function @@ -565,6 +603,9 @@ ENTRY(xscale_processor_functions) .word cpu_xscale_dcache_clean_area .word cpu_xscale_switch_mm .word cpu_xscale_set_pte_ext + .word cpu_xscale_suspend_size + .word cpu_xscale_do_suspend + .word cpu_xscale_do_resume .size xscale_processor_functions, . - xscale_processor_functions .section ".rodata" -- cgit v1.2.3-18-g5258 From 4f5ad99bb5331c571371f94ff4423cbb366c460b Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 6 Feb 2011 17:41:26 +0000 Subject: ARM: pm: convert PXA to generic suspend/resume support Signed-off-by: Russell King --- arch/arm/mach-pxa/include/mach/pm.h | 5 +- arch/arm/mach-pxa/palmz72.c | 2 +- arch/arm/mach-pxa/pm.c | 5 - arch/arm/mach-pxa/pxa25x.c | 4 +- arch/arm/mach-pxa/pxa27x.c | 4 +- arch/arm/mach-pxa/pxa3xx.c | 7 +- arch/arm/mach-pxa/sleep.S | 191 +++--------------------------------- arch/arm/mach-pxa/zeus.c | 2 +- 8 files changed, 26 insertions(+), 194 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/include/mach/pm.h b/arch/arm/mach-pxa/include/mach/pm.h index fd8360c6839..f15afe01299 100644 --- a/arch/arm/mach-pxa/include/mach/pm.h +++ b/arch/arm/mach-pxa/include/mach/pm.h @@ -22,9 +22,8 @@ struct pxa_cpu_pm_fns { extern struct pxa_cpu_pm_fns *pxa_cpu_pm_fns; /* sleep.S */ -extern void pxa25x_cpu_suspend(unsigned int); -extern void pxa27x_cpu_suspend(unsigned int); -extern void pxa_cpu_resume(void); +extern void pxa25x_cpu_suspend(unsigned int, long); +extern void pxa27x_cpu_suspend(unsigned int, long); extern int pxa_pm_enter(suspend_state_t state); extern int pxa_pm_prepare(void); diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index 7bf4017326e..3010193b081 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c @@ -212,7 +212,7 @@ static unsigned long store_ptr; static int palmz72_pm_suspend(struct sys_device *dev, pm_message_t msg) { /* setup the resume_info struct for the original bootloader */ - palmz72_resume_info.resume_addr = (u32) pxa_cpu_resume; + palmz72_resume_info.resume_addr = (u32) cpu_resume; /* Storing memory touched by ROM */ store_ptr = *PALMZ72_SAVE_DWORD; diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c index 978e1b28954..f377f0df298 100644 --- a/arch/arm/mach-pxa/pm.c +++ b/arch/arm/mach-pxa/pm.c @@ -67,11 +67,6 @@ int pxa_pm_enter(suspend_state_t state) EXPORT_SYMBOL_GPL(pxa_pm_enter); -unsigned long sleep_phys_sp(void *sp) -{ - return virt_to_phys(sp); -} - static int pxa_pm_valid(suspend_state_t state) { if (pxa_cpu_pm_fns) diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index fbc5b775f89..0727e48a97f 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -244,7 +244,7 @@ static void pxa25x_cpu_pm_enter(suspend_state_t state) switch (state) { case PM_SUSPEND_MEM: - pxa25x_cpu_suspend(PWRMODE_SLEEP); + pxa25x_cpu_suspend(PWRMODE_SLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET); break; } } @@ -252,7 +252,7 @@ static void pxa25x_cpu_pm_enter(suspend_state_t state) static int pxa25x_cpu_pm_prepare(void) { /* set resume return address */ - PSPR = virt_to_phys(pxa_cpu_resume); + PSPR = virt_to_phys(cpu_resume); return 0; } diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 987301ff4c3..28b11be00b3 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -300,7 +300,7 @@ void pxa27x_cpu_pm_enter(suspend_state_t state) pxa_cpu_standby(); break; case PM_SUSPEND_MEM: - pxa27x_cpu_suspend(pwrmode); + pxa27x_cpu_suspend(pwrmode, PLAT_PHYS_OFFSET - PAGE_OFFSET); break; } } @@ -313,7 +313,7 @@ static int pxa27x_cpu_pm_valid(suspend_state_t state) static int pxa27x_cpu_pm_prepare(void) { /* set resume return address */ - PSPR = virt_to_phys(pxa_cpu_resume); + PSPR = virt_to_phys(cpu_resume); return 0; } diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index a7a19e1cd64..1230343d9c7 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -142,8 +142,7 @@ static void pxa3xx_cpu_pm_suspend(void) volatile unsigned long *p = (volatile void *)0xc0000000; unsigned long saved_data = *p; - extern void pxa3xx_cpu_suspend(void); - extern void pxa3xx_cpu_resume(void); + extern void pxa3xx_cpu_suspend(long); /* resuming from D2 requires the HSIO2/BOOT/TPM clocks enabled */ CKENA |= (1 << CKEN_BOOT) | (1 << CKEN_TPM); @@ -161,9 +160,9 @@ static void pxa3xx_cpu_pm_suspend(void) PSPR = 0x5c014000; /* overwrite with the resume address */ - *p = virt_to_phys(pxa3xx_cpu_resume); + *p = virt_to_phys(cpu_resume); - pxa3xx_cpu_suspend(); + pxa3xx_cpu_suspend(PLAT_PHYS_OFFSET - PAGE_OFFSET); *p = saved_data; diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S index c551da86baf..6f5368899d8 100644 --- a/arch/arm/mach-pxa/sleep.S +++ b/arch/arm/mach-pxa/sleep.S @@ -22,133 +22,26 @@ .text -pxa_cpu_save_cp: - @ get coprocessor registers - mrc p14, 0, r3, c6, c0, 0 @ clock configuration, for turbo mode - mrc p15, 0, r4, c15, c1, 0 @ CP access reg - mrc p15, 0, r5, c13, c0, 0 @ PID - mrc p15, 0, r6, c3, c0, 0 @ domain ID - mrc p15, 0, r7, c2, c0, 0 @ translation table base addr - mrc p15, 0, r8, c1, c1, 0 @ auxiliary control reg - mrc p15, 0, r9, c1, c0, 0 @ control reg - - bic r3, r3, #2 @ clear frequency change bit - - @ store them plus current virtual stack ptr on stack - mov r10, sp - stmfd sp!, {r3 - r10} - - mov pc, lr - -pxa_cpu_save_sp: - @ preserve phys address of stack - mov r0, sp - str lr, [sp, #-4]! - bl sleep_phys_sp - ldr r1, =sleep_save_sp - str r0, [r1] - ldr pc, [sp], #4 - #ifdef CONFIG_PXA3xx /* * pxa3xx_cpu_suspend() - forces CPU into sleep state (S2D3C4) * - * NOTE: unfortunately, pxa_cpu_save_cp can not be reused here since - * the auxiliary control register address is different between pxa3xx - * and pxa{25x,27x} + * r0 = v:p offset */ - ENTRY(pxa3xx_cpu_suspend) #ifndef CONFIG_IWMMXT mra r2, r3, acc0 #endif stmfd sp!, {r2 - r12, lr} @ save registers on stack - - mrc p14, 0, r3, c6, c0, 0 @ clock configuration, for turbo mode - mrc p15, 0, r4, c15, c1, 0 @ CP access reg - mrc p15, 0, r5, c13, c0, 0 @ PID - mrc p15, 0, r6, c3, c0, 0 @ domain ID - mrc p15, 0, r7, c2, c0, 0 @ translation table base addr - mrc p15, 0, r8, c1, c0, 1 @ auxiliary control reg - mrc p15, 0, r9, c1, c0, 0 @ control reg - - bic r3, r3, #2 @ clear frequency change bit - - @ store them plus current virtual stack ptr on stack - mov r10, sp - stmfd sp!, {r3 - r10} - - @ store physical address of stack pointer - mov r0, sp - bl sleep_phys_sp - ldr r1, =sleep_save_sp - str r0, [r1] - - @ clean data cache - bl xsc3_flush_kern_cache_all + mov r1, r0 + ldr r3, =pxa_cpu_resume @ resume function + bl cpu_suspend mov r0, #0x06 @ S2D3C4 mode mcr p14, 0, r0, c7, c0, 0 @ enter sleep 20: b 20b @ waiting for sleep - - .data - .align 5 -/* - * pxa3xx_cpu_resume - */ - -ENTRY(pxa3xx_cpu_resume) - - mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE @ set SVC, irqs off - msr cpsr_c, r0 - - ldr r0, sleep_save_sp @ stack phys addr - ldmfd r0, {r3 - r9, sp} @ CP regs + virt stack ptr - - mov r1, #0 - mcr p15, 0, r1, c7, c7, 0 @ invalidate I & D caches, BTB - mcr p15, 0, r1, c7, c10, 4 @ drain write (&fill) buffer - mcr p15, 0, r1, c7, c5, 4 @ flush prefetch buffer - mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs - - mcr p14, 0, r3, c6, c0, 0 @ clock configuration, turbo mode. - mcr p15, 0, r4, c15, c1, 0 @ CP access reg - mcr p15, 0, r5, c13, c0, 0 @ PID - mcr p15, 0, r6, c3, c0, 0 @ domain ID - mcr p15, 0, r7, c2, c0, 0 @ translation table base addr - mcr p15, 0, r8, c1, c0, 1 @ auxiliary control reg - - @ temporarily map resume_turn_on_mmu into the page table, - @ otherwise prefetch abort occurs after MMU is turned on - mov r1, r7 - bic r1, r1, #0x00ff - bic r1, r1, #0x3f00 - ldr r2, =0x542e - - adr r3, resume_turn_on_mmu - mov r3, r3, lsr #20 - orr r4, r2, r3, lsl #20 - ldr r5, [r1, r3, lsl #2] - str r4, [r1, r3, lsl #2] - - @ Mapping page table address in the page table - mov r6, r1, lsr #20 - orr r7, r2, r6, lsl #20 - ldr r8, [r1, r6, lsl #2] - str r7, [r1, r6, lsl #2] - - ldr r2, =pxa3xx_resume_after_mmu @ absolute virtual address - b resume_turn_on_mmu @ cache align execution - - .text -pxa3xx_resume_after_mmu: - /* restore the temporary mapping */ - str r5, [r1, r3, lsl #2] - str r8, [r1, r6, lsl #2] - b resume_after_mmu - #endif /* CONFIG_PXA3xx */ #ifdef CONFIG_PXA27x @@ -158,28 +51,23 @@ pxa3xx_resume_after_mmu: * Forces CPU into sleep state. * * r0 = value for PWRMODE M field for desired sleep state + * r1 = v:p offset */ - ENTRY(pxa27x_cpu_suspend) #ifndef CONFIG_IWMMXT mra r2, r3, acc0 #endif stmfd sp!, {r2 - r12, lr} @ save registers on stack - - bl pxa_cpu_save_cp - - mov r5, r0 @ save sleep mode - bl pxa_cpu_save_sp - - @ clean data cache - bl xscale_flush_kern_cache_all + mov r4, r0 @ save sleep mode + ldr r3, =pxa_cpu_resume @ resume function + bl cpu_suspend @ Put the processor to sleep @ (also workaround for sighting 28071) @ prepare value for sleep mode - mov r1, r5 @ sleep mode + mov r1, r4 @ sleep mode @ prepare pointer to physical address 0 (virtual mapping in generic.c) mov r2, #UNCACHED_PHYS_0 @@ -216,21 +104,16 @@ ENTRY(pxa27x_cpu_suspend) * Forces CPU into sleep state. * * r0 = value for PWRMODE M field for desired sleep state + * r1 = v:p offset */ ENTRY(pxa25x_cpu_suspend) stmfd sp!, {r2 - r12, lr} @ save registers on stack - - bl pxa_cpu_save_cp - - mov r5, r0 @ save sleep mode - bl pxa_cpu_save_sp - - @ clean data cache - bl xscale_flush_kern_cache_all - + mov r4, r0 @ save sleep mode + ldr r3, =pxa_cpu_resume @ resume function + bl cpu_suspend @ prepare value for sleep mode - mov r1, r5 @ sleep mode + mov r1, r4 @ sleep mode @ prepare pointer to physical address 0 (virtual mapping in generic.c) mov r2, #UNCACHED_PHYS_0 @@ -317,53 +200,9 @@ pxa_cpu_do_suspend: * pxa_cpu_resume() * * entry point from bootloader into kernel during resume - * - * Note: Yes, part of the following code is located into the .data section. - * This is to allow sleep_save_sp to be accessed with a relative load - * while we can't rely on any MMU translation. We could have put - * sleep_save_sp in the .text section as well, but some setups might - * insist on it to be truly read-only. */ - - .data - .align 5 -ENTRY(pxa_cpu_resume) - mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE @ set SVC, irqs off - msr cpsr_c, r0 - - ldr r0, sleep_save_sp @ stack phys addr - ldr r2, =resume_after_mmu @ its absolute virtual address - ldmfd r0, {r3 - r9, sp} @ CP regs + virt stack ptr - - mov r1, #0 - mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs - mcr p15, 0, r1, c7, c7, 0 @ invalidate I & D caches, BTB - - mcr p14, 0, r3, c6, c0, 0 @ clock configuration, turbo mode. - mcr p15, 0, r4, c15, c1, 0 @ CP access reg - mcr p15, 0, r5, c13, c0, 0 @ PID - mcr p15, 0, r6, c3, c0, 0 @ domain ID - mcr p15, 0, r7, c2, c0, 0 @ translation table base addr - mcr p15, 0, r8, c1, c1, 0 @ auxiliary control reg - b resume_turn_on_mmu @ cache align execution - .align 5 -resume_turn_on_mmu: - mcr p15, 0, r9, c1, c0, 0 @ turn on MMU, caches, etc. - - @ Let us ensure we jump to resume_after_mmu only when the mcr above - @ actually took effect. They call it the "cpwait" operation. - mrc p15, 0, r0, c2, c0, 0 @ queue a dependency on CP15 - sub pc, r2, r0, lsr #32 @ jump to virtual addr - nop - nop - nop - -sleep_save_sp: - .word 0 @ preserve stack phys ptr here - - .text -resume_after_mmu: +pxa_cpu_resume: ldmfd sp!, {r2, r3} #ifndef CONFIG_IWMMXT mar acc0, r2, r3 diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index f4b053b3581..b92aa3b8c4f 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -676,7 +676,7 @@ static struct pxa2xx_udc_mach_info zeus_udc_info = { static void zeus_power_off(void) { local_irq_disable(); - pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP); + pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET); } #else #define zeus_power_off NULL -- cgit v1.2.3-18-g5258 From 96c20015dae59e58d055c1e2e17a811e0d1f1d03 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 6 Feb 2011 17:41:40 +0000 Subject: ARM: pm: convert sa11x0 to generic suspend/resume support Convert sa11x0 to use the generic CPU suspend/resume support, rather than implementing its own version. Tested on Assabet. Signed-off-by: Russell King --- arch/arm/mach-sa1100/pm.c | 12 ++------ arch/arm/mach-sa1100/sleep.S | 72 +++----------------------------------------- 2 files changed, 7 insertions(+), 77 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c index ab9fc4470d3..c4661aab22f 100644 --- a/arch/arm/mach-sa1100/pm.c +++ b/arch/arm/mach-sa1100/pm.c @@ -32,8 +32,7 @@ #include #include -extern void sa1100_cpu_suspend(void); -extern void sa1100_cpu_resume(void); +extern void sa1100_cpu_suspend(long); #define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x #define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x] @@ -73,10 +72,10 @@ static int sa11x0_pm_enter(suspend_state_t state) RCSR = RCSR_HWR | RCSR_SWR | RCSR_WDR | RCSR_SMR; /* set resume return address */ - PSPR = virt_to_phys(sa1100_cpu_resume); + PSPR = virt_to_phys(cpu_resume); /* go zzz */ - sa1100_cpu_suspend(); + sa1100_cpu_suspend(PLAT_PHYS_OFFSET - PAGE_OFFSET); cpu_init(); @@ -115,11 +114,6 @@ static int sa11x0_pm_enter(suspend_state_t state) return 0; } -unsigned long sleep_phys_sp(void *sp) -{ - return virt_to_phys(sp); -} - static const struct platform_suspend_ops sa11x0_pm_ops = { .enter = sa11x0_pm_enter, .valid = suspend_valid_only_mem, diff --git a/arch/arm/mach-sa1100/sleep.S b/arch/arm/mach-sa1100/sleep.S index 80f31bad707..04f2a618d4e 100644 --- a/arch/arm/mach-sa1100/sleep.S +++ b/arch/arm/mach-sa1100/sleep.S @@ -20,12 +20,7 @@ #include #include - - .text - - - /* * sa1100_cpu_suspend() * @@ -34,27 +29,10 @@ */ ENTRY(sa1100_cpu_suspend) - stmfd sp!, {r4 - r12, lr} @ save registers on stack - - @ get coprocessor registers - mrc p15, 0, r4, c3, c0, 0 @ domain ID - mrc p15, 0, r5, c2, c0, 0 @ translation table base addr - mrc p15, 0, r6, c13, c0, 0 @ PID - mrc p15, 0, r7, c1, c0, 0 @ control reg - - @ store them plus current virtual stack ptr on stack - mov r8, sp - stmfd sp!, {r4 - r8} - - @ preserve phys address of stack - mov r0, sp - bl sleep_phys_sp - ldr r1, =sleep_save_sp - str r0, [r1] - - @ clean data cache and invalidate WB - bl v4wb_flush_kern_cache_all + mov r1, r0 + ldr r3, =sa1100_cpu_resume @ return function + bl cpu_suspend @ disable clock switching mcr p15, 0, r1, c15, c2, 2 @@ -166,50 +144,8 @@ sa1110_sdram_controller_fix: * cpu_sa1100_resume() * * entry point from bootloader into kernel during resume - * - * Note: Yes, part of the following code is located into the .data section. - * This is to allow sleep_save_sp to be accessed with a relative load - * while we can't rely on any MMU translation. We could have put - * sleep_save_sp in the .text section as well, but some setups might - * insist on it to be truly read-only. */ - - .data - .align 5 -ENTRY(sa1100_cpu_resume) - mov r0, #PSR_F_BIT | PSR_I_BIT | SVC_MODE - msr cpsr_c, r0 @ set SVC, irqs off - - ldr r0, sleep_save_sp @ stack phys addr - ldr r2, =resume_after_mmu @ its absolute virtual address - ldmfd r0, {r4 - r7, sp} @ CP regs + virt stack ptr - - mov r1, #0 - mcr p15, 0, r1, c8, c7, 0 @ flush I+D TLBs - mcr p15, 0, r1, c7, c7, 0 @ flush I&D cache - mcr p15, 0, r1, c9, c0, 0 @ invalidate RB - mcr p15, 0, r1, c9, c0, 5 @ allow user space to use RB - - mcr p15, 0, r4, c3, c0, 0 @ domain ID - mcr p15, 0, r5, c2, c0, 0 @ translation table base addr - mcr p15, 0, r6, c13, c0, 0 @ PID - b resume_turn_on_mmu @ cache align execution - .align 5 -resume_turn_on_mmu: - mcr p15, 0, r7, c1, c0, 0 @ turn on MMU, caches, etc. - nop - mov pc, r2 @ jump to virtual addr - nop - nop - nop - -sleep_save_sp: - .word 0 @ preserve stack phys ptr here - - .text -resume_after_mmu: +sa1100_cpu_resume: mcr p15, 0, r1, c15, c1, 2 @ enable clock switching ldmfd sp!, {r4 - r12, pc} @ return to caller - - -- cgit v1.2.3-18-g5258 From 2e2f3d3792de5913897b6bb49ac13915b0b020d5 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 6 Feb 2011 17:39:31 +0000 Subject: ARM: pm: convert samsung platforms to generic suspend/resume support Tested-by: Kukjin Kim Signed-off-by: Russell King --- arch/arm/mach-s3c64xx/sleep.S | 63 ++----------------- arch/arm/mach-s5pv210/sleep.S | 105 ++------------------------------ arch/arm/plat-s3c24xx/sleep.S | 57 ++--------------- arch/arm/plat-samsung/include/plat/pm.h | 12 +--- arch/arm/plat-samsung/pm.c | 16 +---- 5 files changed, 14 insertions(+), 239 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c64xx/sleep.S b/arch/arm/mach-s3c64xx/sleep.S index b2ef4431736..afe5a762f46 100644 --- a/arch/arm/mach-s3c64xx/sleep.S +++ b/arch/arm/mach-s3c64xx/sleep.S @@ -32,25 +32,13 @@ * code after resume. * * entry: - * r0 = pointer to the save block + * r1 = v:p offset */ ENTRY(s3c_cpu_save) stmfd sp!, { r4 - r12, lr } - - mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID - mrc p15, 0, r5, c3, c0, 0 @ Domain ID - mrc p15, 0, r6, c2, c0, 0 @ Translation Table BASE0 - mrc p15, 0, r7, c2, c0, 1 @ Translation Table BASE1 - mrc p15, 0, r8, c2, c0, 2 @ Translation Table Control - mrc p15, 0, r9, c1, c0, 0 @ Control register - mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register - mrc p15, 0, r11, c1, c0, 2 @ Co-processor access controls - - stmia r0, { r4 - r13 } @ Save CP registers and SP - - @@ save our state to ram - bl s3c_pm_cb_flushcache + ldr r3, =resume_with_mmu + bl cpu_suspend @@ call final suspend code ldr r0, =pm_cpu_sleep @@ -61,18 +49,6 @@ ENTRY(s3c_cpu_save) resume_with_mmu: ldmfd sp!, { r4 - r12, pc } @ return, from sp from s3c_cpu_save - .data - - /* the next bit is code, but it requires easy access to the - * s3c_sleep_save_phys data before the MMU is switched on, so - * we store the code that needs this variable in the .data where - * the value can be written to (the .text segment is RO). - */ - - .global s3c_sleep_save_phys -s3c_sleep_save_phys: - .word 0 - /* Sleep magic, the word before the resume entry point so that the * bootloader can check for a resumeable image. */ @@ -110,35 +86,4 @@ ENTRY(s3c_cpu_resume) orr r0, r0, #1 << 15 @ GPN15 str r0, [ r3, #S3C64XX_GPNDAT ] #endif - - /* __v6_setup from arch/arm/mm/proc-v6.S, ensure that the caches - * are thoroughly cleaned just in case the bootloader didn't do it - * for us. */ - mov r0, #0 - mcr p15, 0, r0, c7, c14, 0 @ clean+invalidate D cache - mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache - mcr p15, 0, r0, c7, c15, 0 @ clean+invalidate cache - mcr p15, 0, r0, c7, c10, 4 @ drain write buffer - @@mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs - @@mcr p15, 0, r0, c7, c7, 0 @ Invalidate I + D caches - - ldr r0, s3c_sleep_save_phys - ldmia r0, { r4 - r13 } - - mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID - mcr p15, 0, r5, c3, c0, 0 @ Domain ID - mcr p15, 0, r6, c2, c0, 0 @ Translation Table BASE0 - mcr p15, 0, r7, c2, c0, 1 @ Translation Table BASE1 - mcr p15, 0, r8, c2, c0, 2 @ Translation Table Control - mcr p15, 0, r10, c1, c0, 1 @ Auxiliary control register - - mov r0, #0 @ restore copro access controls - mcr p15, 0, r11, c1, c0, 2 @ Co-processor access controls - mcr p15, 0, r0, c7, c5, 4 - - ldr r2, =resume_with_mmu - mcr p15, 0, r9, c1, c0, 0 /* turn mmu back on */ - nop - mov pc, r2 /* jump back */ - - .end + b cpu_resume diff --git a/arch/arm/mach-s5pv210/sleep.S b/arch/arm/mach-s5pv210/sleep.S index d4d222b716b..a3d649466fb 100644 --- a/arch/arm/mach-s5pv210/sleep.S +++ b/arch/arm/mach-s5pv210/sleep.S @@ -35,50 +35,24 @@ /* s3c_cpu_save * * entry: - * r0 = save address (virtual addr of s3c_sleep_save_phys) + * r1 = v:p offset */ ENTRY(s3c_cpu_save) stmfd sp!, { r3 - r12, lr } - - mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID - mrc p15, 0, r5, c3, c0, 0 @ Domain ID - mrc p15, 0, r6, c2, c0, 0 @ Translation Table BASE0 - mrc p15, 0, r7, c2, c0, 1 @ Translation Table BASE1 - mrc p15, 0, r8, c2, c0, 2 @ Translation Table Control - mrc p15, 0, r9, c1, c0, 0 @ Control register - mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register - mrc p15, 0, r11, c1, c0, 2 @ Co-processor access controls - mrc p15, 0, r12, c10, c2, 0 @ Read PRRR - mrc p15, 0, r3, c10, c2, 1 @ READ NMRR - - stmia r0, { r3 - r13 } - - bl s3c_pm_cb_flushcache + ldr r3, =resume_with_mmu + bl cpu_suspend ldr r0, =pm_cpu_sleep ldr r0, [ r0 ] mov pc, r0 resume_with_mmu: - /* - * After MMU is turned on, restore the previous MMU table. - */ - ldr r9 , =(PAGE_OFFSET - PHYS_OFFSET) - add r4, r4, r9 - str r12, [r4] - ldmfd sp!, { r3 - r12, pc } .ltorg - .data - - .global s3c_sleep_save_phys -s3c_sleep_save_phys: - .word 0 - /* sleep magic, to allow the bootloader to check for an valid * image to resume to. Must be the first word before the * s3c_cpu_resume entry. @@ -96,75 +70,4 @@ s3c_sleep_save_phys: */ ENTRY(s3c_cpu_resume) - mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE - msr cpsr_c, r0 - - mov r1, #0 - mcr p15, 0, r1, c8, c7, 0 @ invalidate TLBs - mcr p15, 0, r1, c7, c5, 0 @ invalidate I Cache - - ldr r0, s3c_sleep_save_phys @ address of restore block - ldmia r0, { r3 - r13 } - - mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID - mcr p15, 0, r5, c3, c0, 0 @ Domain ID - - mcr p15, 0, r8, c2, c0, 2 @ Translation Table Control - mcr p15, 0, r7, c2, c0, 1 @ Translation Table BASE1 - mcr p15, 0, r6, c2, c0, 0 @ Translation Table BASE0 - - mcr p15, 0, r10, c1, c0, 1 @ Auxiliary control register - - mov r0, #0 - mcr p15, 0, r0, c8, c7, 0 @ Invalidate I & D TLB - - mov r0, #0 @ restore copro access - mcr p15, 0, r11, c1, c0, 2 @ Co-processor access - mcr p15, 0, r0, c7, c5, 4 - - mcr p15, 0, r12, c10, c2, 0 @ write PRRR - mcr p15, 0, r3, c10, c2, 1 @ write NMRR - - /* - * In Cortex-A8, when MMU is turned on, the pipeline is flushed. - * And there are no valid entries in the MMU table at this point. - * So before turning on the MMU, the MMU entry for the DRAM address - * range is added. After the MMU is turned on, the other entries - * in the MMU table will be restored. - */ - - /* r6 = Translation Table BASE0 */ - mov r4, r6 - mov r4, r4, LSR #14 - mov r4, r4, LSL #14 - - /* Load address for adding to MMU table list */ - ldr r11, =0xE010F000 @ INFORM0 reg. - ldr r10, [r11, #0] - mov r10, r10, LSR #18 - bic r10, r10, #0x3 - orr r4, r4, r10 - - /* Calculate MMU table entry */ - mov r10, r10, LSL #18 - ldr r5, =0x40E - orr r10, r10, r5 - - /* Back up originally data */ - ldr r12, [r4] - - /* Add calculated MMU table entry into MMU table list */ - str r10, [r4] - - ldr r2, =resume_with_mmu - mcr p15, 0, r9, c1, c0, 0 @ turn on MMU, etc - - nop - nop - nop - nop - nop @ second-to-last before mmu - - mov pc, r2 @ go back to virtual address - - .ltorg + b cpu_resume diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S index e73e3b6e88d..fd7032f84ae 100644 --- a/arch/arm/plat-s3c24xx/sleep.S +++ b/arch/arm/plat-s3c24xx/sleep.S @@ -44,23 +44,13 @@ /* s3c_cpu_save * * entry: - * r0 = save address (virtual addr of s3c_sleep_save_phys) + * r1 = v:p offset */ ENTRY(s3c_cpu_save) stmfd sp!, { r4 - r12, lr } - - @@ store co-processor registers - - mrc p15, 0, r4, c13, c0, 0 @ PID - mrc p15, 0, r5, c3, c0, 0 @ Domain ID - mrc p15, 0, r6, c2, c0, 0 @ translation table base address - mrc p15, 0, r7, c1, c0, 0 @ control register - - stmia r0, { r4 - r13 } - - @@ write our state back to RAM - bl s3c_pm_cb_flushcache + ldr r3, =resume_with_mmu + bl cpu_suspend @@ jump to final code to send system to sleep ldr r0, =pm_cpu_sleep @@ -76,20 +66,6 @@ resume_with_mmu: .ltorg - @@ the next bits sit in the .data segment, even though they - @@ happen to be code... the s3c_sleep_save_phys needs to be - @@ accessed by the resume code before it can restore the MMU. - @@ This means that the variable has to be close enough for the - @@ code to read it... since the .text segment needs to be RO, - @@ the data segment can be the only place to put this code. - - .data - - .global s3c_sleep_save_phys -s3c_sleep_save_phys: - .word 0 - - /* sleep magic, to allow the bootloader to check for an valid * image to resume to. Must be the first word before the * s3c_cpu_resume entry. @@ -100,10 +76,6 @@ s3c_sleep_save_phys: /* s3c_cpu_resume * * resume code entry for bootloader to call - * - * we must put this code here in the data segment as we have no - * other way of restoring the stack pointer after sleep, and we - * must not write to the code segment (code is read-only) */ ENTRY(s3c_cpu_resume) @@ -134,25 +106,4 @@ ENTRY(s3c_cpu_resume) beq 1001b #endif /* CONFIG_DEBUG_RESUME */ - mov r1, #0 - mcr p15, 0, r1, c8, c7, 0 @@ invalidate I & D TLBs - mcr p15, 0, r1, c7, c7, 0 @@ invalidate I & D caches - - ldr r0, s3c_sleep_save_phys @ address of restore block - ldmia r0, { r4 - r13 } - - mcr p15, 0, r4, c13, c0, 0 @ PID - mcr p15, 0, r5, c3, c0, 0 @ Domain ID - mcr p15, 0, r6, c2, c0, 0 @ translation table base - -#ifdef CONFIG_DEBUG_RESUME - mov r3, #'R' - strb r3, [ r2, #S3C2410_UTXH ] -#endif - - ldr r2, =resume_with_mmu - mcr p15, 0, r7, c1, c0, 0 @ turn on MMU, etc - nop @ second-to-last before mmu - mov pc, r2 @ go back to virtual address - - .ltorg + b cpu_resume diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h index d9025e37767..4aa697dfe13 100644 --- a/arch/arm/plat-samsung/include/plat/pm.h +++ b/arch/arm/plat-samsung/include/plat/pm.h @@ -50,13 +50,11 @@ extern unsigned char pm_uart_udivslot; /* true to save UART UDIVSLOT */ /* from sleep.S */ -extern int s3c_cpu_save(unsigned long *saveblk); +extern int s3c_cpu_save(unsigned long *saveblk, long); extern void s3c_cpu_resume(void); extern void s3c2410_cpu_suspend(void); -extern unsigned long s3c_sleep_save_phys; - /* sleep save info */ /** @@ -179,13 +177,5 @@ extern void s3c_pm_restore_gpios(void); */ extern void s3c_pm_save_gpios(void); -/** - * s3c_pm_cb_flushcache - callback for assembly code - * - * Callback to issue flush_cache_all() as this call is - * not a directly callable object. - */ -extern void s3c_pm_cb_flushcache(void); - extern void s3c_pm_save_core(void); extern void s3c_pm_restore_core(void); diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index 02d531fb3f8..d5b58d31903 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -241,8 +241,6 @@ void (*pm_cpu_sleep)(void); static int s3c_pm_enter(suspend_state_t state) { - static unsigned long regs_save[16]; - /* ensure the debug is initialised (if enabled) */ s3c_pm_debug_init(); @@ -266,12 +264,6 @@ static int s3c_pm_enter(suspend_state_t state) return -EINVAL; } - /* store the physical address of the register recovery block */ - - s3c_sleep_save_phys = virt_to_phys(regs_save); - - S3C_PMDBG("s3c_sleep_save_phys=0x%08lx\n", s3c_sleep_save_phys); - /* save all necessary core registers not covered by the drivers */ s3c_pm_save_gpios(); @@ -305,7 +297,7 @@ static int s3c_pm_enter(suspend_state_t state) * we resume as it saves its own register state and restores it * during the resume. */ - s3c_cpu_save(regs_save); + s3c_cpu_save(0, PLAT_PHYS_OFFSET - PAGE_OFFSET); /* restore the cpu state using the kernel's cpu init code. */ @@ -336,12 +328,6 @@ static int s3c_pm_enter(suspend_state_t state) return 0; } -/* callback from assembly code */ -void s3c_pm_cb_flushcache(void) -{ - flush_cache_all(); -} - static int s3c_pm_prepare(void) { /* prepare check area if configured */ -- cgit v1.2.3-18-g5258 From 941aefac4c243cf407d7665d3e64beb32d556acf Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 11 Feb 2011 11:32:19 +0000 Subject: ARM: pm: allow generic sleep code to be used with SMP CPU idle Allow the generic sleep code to be used with SMP CPU idle by storing N CPU stack pointers rather than just one. Tested on Assabet and Tegra 2. Tested-by: Colin Cross Signed-off-by: Russell King --- arch/arm/kernel/sleep.S | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S index 2ba17946619..bfad698a02e 100644 --- a/arch/arm/kernel/sleep.S +++ b/arch/arm/kernel/sleep.S @@ -1,4 +1,5 @@ #include +#include #include #include #include @@ -26,7 +27,14 @@ ENTRY(cpu_suspend) stmfd sp!, {r1, r2, r3, ip} @ save v:p, virt SP, retfn, phys resume fn ldr r3, =sleep_save_sp add r2, sp, r1 @ convert SP to phys +#ifdef CONFIG_SMP + ALT_SMP(mrc p15, 0, lr, c0, c0, 5) + ALT_UP(mov lr, #0) + and lr, lr, #15 + str r2, [r3, lr, lsl #2] @ save phys SP +#else str r2, [r3] @ save phys SP +#endif mov lr, pc ldr pc, [r10, #CPU_DO_SUSPEND] @ save CPU state #else @@ -37,7 +45,14 @@ ENTRY(cpu_suspend) stmfd sp!, {r1, r2, r3} @ save v:p, virt SP, return fn ldr r3, =sleep_save_sp add r2, sp, r1 @ convert SP to phys +#ifdef CONFIG_SMP + ALT_SMP(mrc p15, 0, lr, c0, c0, 5) + ALT_UP(mov lr, #0) + and lr, lr, #15 + str r2, [r3, lr, lsl #2] @ save phys SP +#else str r2, [r3] @ save phys SP +#endif bl cpu_do_suspend #endif @@ -95,7 +110,15 @@ ENDPROC(cpu_resume_after_mmu) .data .align ENTRY(cpu_resume) +#ifdef CONFIG_SMP + adr r0, sleep_save_sp + ALT_SMP(mrc p15, 0, r1, c0, c0, 5) + ALT_UP(mov r1, #0) + and r1, r1, #15 + ldr r0, [r0, r1, lsl #2] @ stack phys addr +#else ldr r0, sleep_save_sp @ stack phys addr +#endif msr cpsr_c, #PSR_I_BIT | PSR_F_BIT | SVC_MODE @ set SVC, irqs off #ifdef MULTI_CPU ldmia r0!, {r1, sp, lr, pc} @ load v:p, stack, return fn, resume fn @@ -106,4 +129,6 @@ ENTRY(cpu_resume) ENDPROC(cpu_resume) sleep_save_sp: - .word 0 @ preserve stack phys ptr here + .rept CONFIG_NR_CPUS + .long 0 @ preserve stack phys ptr here + .endr -- cgit v1.2.3-18-g5258 From 2f14ddc3a7146ea4cd5a3d1ecd993f85f2e4f948 Mon Sep 17 00:00:00 2001 From: "Zhang, Fengzhe" Date: Wed, 16 Feb 2011 22:26:20 +0800 Subject: xen/setup: Inhibit resource API from using System RAM E820 gaps as PCI mem gaps. With the hypervisor argument of dom0_mem=X we iterate over the physical (only for the initial domain) E820 and subtract the the size from each E820_RAM region the delta so that the cumulative size of all E820_RAM regions is equal to 'X'. This sometimes ends up with E820_RAM regions with zero size (which are removed by e820_sanitize) and E820_RAM that are smaller than physically. Later on the PCI API looks at the E820 and attempts to set up an resource region for the "PCI mem". The E820 (assume dom0_mem=1GB is set) compared to the physical looks as so: [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 0000000000097c00 (usable) [ 0.000000] Xen: 0000000000097c00 - 0000000000100000 (reserved) -[ 0.000000] Xen: 0000000000100000 - 00000000defafe00 (usable) +[ 0.000000] Xen: 0000000000100000 - 0000000040000000 (usable) [ 0.000000] Xen: 00000000defafe00 - 00000000defb1ea0 (ACPI NVS) [ 0.000000] Xen: 00000000defb1ea0 - 00000000e0000000 (reserved) [ 0.000000] Xen: 00000000f4000000 - 00000000f8000000 (reserved) .. And we get [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:9efafe00) while it should have started at e0000000 (a nice big gap up to f4000000 exists). The "Allocating PCI" is part of the resource API. The users that end up using those PCI I/O regions usually supply their own BARs when calling the resource API (request_resource, or allocate_resource), but there are exceptions which provide an empty 'struct resource' and expect the API to provide the 'struct resource' to be populated with valid values. The one that triggered this bug was the intel AGP driver that requested a region for the flush page (intel_i9xx_setup_flush). Before this patch, when running under Xen hypervisor, the 'struct resource' returned could have (depending on the dom0_mem size) physical ranges of a 'System RAM' instead of 'I/O' regions. This ended up with the Hypervisor failing a request to populate PTE's with those PFNs as the domain did not have access to those 'System RAM' regions (rightly so). After this patch, the left-over E820_RAM region from the truncation, will be labeled as E820_UNUSABLE. The E820 will look as so: [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 0000000000097c00 (usable) [ 0.000000] Xen: 0000000000097c00 - 0000000000100000 (reserved) -[ 0.000000] Xen: 0000000000100000 - 00000000defafe00 (usable) +[ 0.000000] Xen: 0000000000100000 - 0000000040000000 (usable) +[ 0.000000] Xen: 0000000040000000 - 00000000defafe00 (unusable) [ 0.000000] Xen: 00000000defafe00 - 00000000defb1ea0 (ACPI NVS) [ 0.000000] Xen: 00000000defb1ea0 - 00000000e0000000 (reserved) [ 0.000000] Xen: 00000000f4000000 - 00000000f8000000 (reserved) For more information: http://mid.gmane.org/1A42CE6F5F474C41B63392A5F80372B2335E978C@shsmsx501.ccr.corp.intel.com BugLink: http://bugzilla.xensource.com/bugzilla/show_bug.cgi?id=1726 Signed-off-by: Fengzhe Zhang Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/setup.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index a8a66a50d44..2a4add9634c 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -194,6 +194,14 @@ char * __init xen_memory_setup(void) end -= delta; extra_pages += PFN_DOWN(delta); + /* + * Set RAM below 4GB that is not for us to be unusable. + * This prevents "System RAM" address space from being + * used as potential resource for I/O address (happens + * when 'allocate_resource' is called). + */ + if (delta && end < 0x100000000UL) + e820_add_region(end, delta, E820_UNUSABLE); } if (map[i].size > 0 && end > xen_extra_mem_start) -- cgit v1.2.3-18-g5258 From 3b03b58dab847883e6b9a431558c7d8e43fa94c6 Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Tue, 22 Feb 2011 10:36:27 +0100 Subject: OMAP4: hwmod data: Prevent timer1 to be reset and idle during init Since the timer1 is now started before the hwmod_init, we cannot reset it and idle it anymore. Add the appropriate flags to prevent the hwmod framework to do that. Signed-off-by: Benoit Cousson Cc: Kevin Hilman Acked-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 182aa79d5e5..79a86017891 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -3989,6 +3989,7 @@ static struct omap_hwmod_ocp_if *omap44xx_timer1_slaves[] = { static struct omap_hwmod omap44xx_timer1_hwmod = { .name = "timer1", .class = &omap44xx_timer_1ms_hwmod_class, + .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET, .mpu_irqs = omap44xx_timer1_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_timer1_irqs), .main_clk = "timer1_fck", -- cgit v1.2.3-18-g5258 From 78f379b574dcbe656fa21ea72e95f8dff232e233 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Wed, 20 Oct 2010 19:19:58 -0700 Subject: ARM: tegra: clock: Refcount periph clock enables Some peripheral clocks share enable bits. Refcount the enables so that calling clk_disable on one clock will not turn off another clock. Signed-off-by: Colin Cross Acked-by: Olof Johansson --- arch/arm/mach-tegra/tegra2_clocks.c | 37 +++++++++++++++++++++++++++++++------ 1 file changed, 31 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c index 59e77ba9580..2ca8b74ec07 100644 --- a/arch/arm/mach-tegra/tegra2_clocks.c +++ b/arch/arm/mach-tegra/tegra2_clocks.c @@ -159,6 +159,12 @@ static void __iomem *reg_pmc_base = IO_ADDRESS(TEGRA_PMC_BASE); */ static DEFINE_SPINLOCK(clock_register_lock); +/* + * Some peripheral clocks share an enable bit, so refcount the enable bits + * in registers CLK_ENABLE_L, CLK_ENABLE_H, and CLK_ENABLE_U + */ +static int tegra_periph_clk_enable_refcount[3 * 32]; + #define clk_writel(value, reg) \ __raw_writel(value, (u32)reg_clk_base + (reg)) #define clk_readl(reg) \ @@ -952,8 +958,17 @@ static void tegra2_periph_clk_init(struct clk *c) static int tegra2_periph_clk_enable(struct clk *c) { u32 val; + unsigned long flags; + int refcount; pr_debug("%s on clock %s\n", __func__, c->name); + spin_lock_irqsave(&clock_register_lock, flags); + + refcount = tegra_periph_clk_enable_refcount[c->u.periph.clk_num]++; + + if (refcount > 1) + goto out; + clk_writel(PERIPH_CLK_TO_ENB_BIT(c), CLK_OUT_ENB_SET + PERIPH_CLK_TO_ENB_SET_REG(c)); if (!(c->flags & PERIPH_NO_RESET) && !(c->flags & PERIPH_MANUAL_RESET)) @@ -966,15 +981,29 @@ static int tegra2_periph_clk_enable(struct clk *c) val |= 0x3 << 24; clk_writel(val, c->reg); } + +out: + spin_unlock_irqrestore(&clock_register_lock, flags); + return 0; } static void tegra2_periph_clk_disable(struct clk *c) { + unsigned long flags; + pr_debug("%s on clock %s\n", __func__, c->name); - clk_writel(PERIPH_CLK_TO_ENB_BIT(c), - CLK_OUT_ENB_CLR + PERIPH_CLK_TO_ENB_SET_REG(c)); + spin_lock_irqsave(&clock_register_lock, flags); + + if (c->refcnt) + tegra_periph_clk_enable_refcount[c->u.periph.clk_num]--; + + if (tegra_periph_clk_enable_refcount[c->u.periph.clk_num] == 0) + clk_writel(PERIPH_CLK_TO_ENB_BIT(c), + CLK_OUT_ENB_CLR + PERIPH_CLK_TO_ENB_SET_REG(c)); + + spin_unlock_irqrestore(&clock_register_lock, flags); } static void tegra2_periph_clk_reset(struct clk *c, bool assert) @@ -2076,7 +2105,6 @@ struct clk tegra_list_clks[] = { PERIPH_CLK("timer", "timer", NULL, 5, 0, 26000000, mux_clk_m, 0), PERIPH_CLK("i2s1", "i2s.0", NULL, 11, 0x100, 26000000, mux_pllaout0_audio2x_pllp_clkm, MUX | DIV_U71), PERIPH_CLK("i2s2", "i2s.1", NULL, 18, 0x104, 26000000, mux_pllaout0_audio2x_pllp_clkm, MUX | DIV_U71), - /* FIXME: spdif has 2 clocks but 1 enable */ PERIPH_CLK("spdif_out", "spdif_out", NULL, 10, 0x108, 100000000, mux_pllaout0_audio2x_pllp_clkm, MUX | DIV_U71), PERIPH_CLK("spdif_in", "spdif_in", NULL, 10, 0x10c, 100000000, mux_pllp_pllc_pllm, MUX | DIV_U71), PERIPH_CLK("pwm", "pwm", NULL, 17, 0x110, 432000000, mux_pllp_pllc_audio_clkm_clk32, MUX | DIV_U71), @@ -2089,7 +2117,6 @@ struct clk tegra_list_clks[] = { PERIPH_CLK("sbc4", "spi_tegra.3", NULL, 68, 0x1b4, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), PERIPH_CLK("ide", "ide", NULL, 25, 0x144, 100000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* requires min voltage */ PERIPH_CLK("ndflash", "tegra_nand", NULL, 13, 0x160, 164000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* scales with voltage */ - /* FIXME: vfir shares an enable with uartb */ PERIPH_CLK("vfir", "vfir", NULL, 7, 0x168, 72000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), PERIPH_CLK("sdmmc1", "sdhci-tegra.0", NULL, 14, 0x150, 52000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* scales with voltage */ PERIPH_CLK("sdmmc2", "sdhci-tegra.1", NULL, 9, 0x154, 52000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* scales with voltage */ @@ -2120,13 +2147,11 @@ struct clk tegra_list_clks[] = { PERIPH_CLK("uarte", "uart.4", NULL, 66, 0x1c4, 600000000, mux_pllp_pllc_pllm_clkm, MUX), PERIPH_CLK("3d", "3d", NULL, 24, 0x158, 300000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | PERIPH_MANUAL_RESET), /* scales with voltage and process_id */ PERIPH_CLK("2d", "2d", NULL, 21, 0x15c, 300000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71), /* scales with voltage and process_id */ - /* FIXME: vi and vi_sensor share an enable */ PERIPH_CLK("vi", "tegra_camera", "vi", 20, 0x148, 150000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71), /* scales with voltage and process_id */ PERIPH_CLK("vi_sensor", "tegra_camera", "vi_sensor", 20, 0x1a8, 150000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | PERIPH_NO_RESET), /* scales with voltage and process_id */ PERIPH_CLK("epp", "epp", NULL, 19, 0x16c, 300000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71), /* scales with voltage and process_id */ PERIPH_CLK("mpe", "mpe", NULL, 60, 0x170, 250000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71), /* scales with voltage and process_id */ PERIPH_CLK("host1x", "host1x", NULL, 28, 0x180, 166000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71), /* scales with voltage and process_id */ - /* FIXME: cve and tvo share an enable */ PERIPH_CLK("cve", "cve", NULL, 49, 0x140, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* requires min voltage */ PERIPH_CLK("tvo", "tvo", NULL, 49, 0x188, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* requires min voltage */ PERIPH_CLK("hdmi", "hdmi", NULL, 51, 0x18c, 600000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* requires min voltage */ -- cgit v1.2.3-18-g5258 From 421186e71000c067c2687baeffde62954a80cdcc Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Sat, 12 Feb 2011 18:21:47 -0800 Subject: ARM: tegra: clock: Round rate before setting rate Call the clock's round_rate op, if it exists, before calling the set_rate op. This will help later when dvfs is added, dvfs needs to know what the final rate will be before the frequency changes. Also requires fixes to the round rate functions to ensure calling round rate and then set rate will not cause the frequency to be rounded down twice. When picking clock divider values, the clock framework picks the closest frequency that is lower than the requested frequency. If the new frequency calculated from the divider value is rounded down, and then passed to set_rate, it will get rounded down again, possibly resulting in a frequency two steps lower than the original requested frequency. Fix the problem by rounding up when calculating the frequency coming out of a clock divider, so if that frequency is requested again, the same divider value will be picked. Signed-off-by: Colin Cross Acked-by: Olof Johansson --- arch/arm/mach-tegra/clock.c | 12 ++++++++++++ arch/arm/mach-tegra/tegra2_clocks.c | 8 ++++---- 2 files changed, 16 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c index 165aa9c748f..e028320ab42 100644 --- a/arch/arm/mach-tegra/clock.c +++ b/arch/arm/mach-tegra/clock.c @@ -86,6 +86,7 @@ static unsigned long clk_predict_rate_from_parent(struct clk *c, struct clk *p) if (c->mul != 0 && c->div != 0) { rate *= c->mul; + rate += c->div - 1; /* round up */ do_div(rate, c->div); } @@ -240,12 +241,23 @@ EXPORT_SYMBOL(clk_get_parent); int clk_set_rate_locked(struct clk *c, unsigned long rate) { + long new_rate; + if (!c->ops || !c->ops->set_rate) return -ENOSYS; if (rate > c->max_rate) rate = c->max_rate; + if (c->ops && c->ops->round_rate) { + new_rate = c->ops->round_rate(c, rate); + + if (new_rate < 0) + return new_rate; + + rate = new_rate; + } + return c->ops->set_rate(c, rate); } diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c index 2ca8b74ec07..73e112f1269 100644 --- a/arch/arm/mach-tegra/tegra2_clocks.c +++ b/arch/arm/mach-tegra/tegra2_clocks.c @@ -898,9 +898,9 @@ static long tegra2_pll_div_clk_round_rate(struct clk *c, unsigned long rate) divider = clk_div71_get_divider(parent_rate, rate); if (divider < 0) return divider; - return parent_rate * 2 / (divider + 2); + return DIV_ROUND_UP(parent_rate * 2, divider + 2); } else if (c->flags & DIV_2) { - return parent_rate / 2; + return DIV_ROUND_UP(parent_rate, 2); } return -EINVAL; } @@ -1092,12 +1092,12 @@ static long tegra2_periph_clk_round_rate(struct clk *c, if (divider < 0) return divider; - return parent_rate * 2 / (divider + 2); + return DIV_ROUND_UP(parent_rate * 2, divider + 2); } else if (c->flags & DIV_U16) { divider = clk_div16_get_divider(parent_rate, rate); if (divider < 0) return divider; - return parent_rate / (divider + 1); + return DIV_ROUND_UP(parent_rate, divider + 1); } return -EINVAL; } -- cgit v1.2.3-18-g5258 From 1be3d0537516fa42825406b4bc1291b77ed62614 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Mon, 21 Feb 2011 16:44:07 -0800 Subject: ARM: tegra: clock: prevent accidental disables of cpu clock Peripheral clocks that have no clock enable bit in the enable registers have their clk_num set to 0. Bit 0 in the clock enable registers is the CPU clock. Prevent disables on these peripheral clocks from accidentally disabling the CPU clock. Signed-off-by: Colin Cross Acked-by: Olof Johansson --- arch/arm/mach-tegra/tegra2_clocks.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c index 73e112f1269..3015a2c6425 100644 --- a/arch/arm/mach-tegra/tegra2_clocks.c +++ b/arch/arm/mach-tegra/tegra2_clocks.c @@ -946,9 +946,14 @@ static void tegra2_periph_clk_init(struct clk *c) } c->state = ON; + + if (!c->u.periph.clk_num) + return; + if (!(clk_readl(CLK_OUT_ENB + PERIPH_CLK_TO_ENB_REG(c)) & PERIPH_CLK_TO_ENB_BIT(c))) c->state = OFF; + if (!(c->flags & PERIPH_NO_RESET)) if (clk_readl(RST_DEVICES + PERIPH_CLK_TO_ENB_REG(c)) & PERIPH_CLK_TO_ENB_BIT(c)) @@ -962,6 +967,9 @@ static int tegra2_periph_clk_enable(struct clk *c) int refcount; pr_debug("%s on clock %s\n", __func__, c->name); + if (!c->u.periph.clk_num) + return 0; + spin_lock_irqsave(&clock_register_lock, flags); refcount = tegra_periph_clk_enable_refcount[c->u.periph.clk_num]++; @@ -994,6 +1002,9 @@ static void tegra2_periph_clk_disable(struct clk *c) pr_debug("%s on clock %s\n", __func__, c->name); + if (!c->u.periph.clk_num) + return; + spin_lock_irqsave(&clock_register_lock, flags); if (c->refcnt) @@ -1012,6 +1023,9 @@ static void tegra2_periph_clk_reset(struct clk *c, bool assert) pr_debug("%s %s on clock %s\n", __func__, assert ? "assert" : "deassert", c->name); + + BUG_ON(!c->u.periph.clk_num); + if (!(c->flags & PERIPH_NO_RESET)) clk_writel(PERIPH_CLK_TO_ENB_BIT(c), base + PERIPH_CLK_TO_ENB_SET_REG(c)); @@ -1182,6 +1196,10 @@ static void tegra2_clk_double_init(struct clk *c) c->mul = 2; c->div = 1; c->state = ON; + + if (!c->u.periph.clk_num) + return; + if (!(clk_readl(CLK_OUT_ENB + PERIPH_CLK_TO_ENB_REG(c)) & PERIPH_CLK_TO_ENB_BIT(c))) c->state = OFF; @@ -1269,6 +1287,9 @@ static void tegra2_cdev_clk_init(struct clk *c) /* We could un-tristate the cdev1 or cdev2 pingroup here; this is * currently done in the pinmux code. */ c->state = ON; + + BUG_ON(!c->u.periph.clk_num); + if (!(clk_readl(CLK_OUT_ENB + PERIPH_CLK_TO_ENB_REG(c)) & PERIPH_CLK_TO_ENB_BIT(c))) c->state = OFF; @@ -1276,6 +1297,8 @@ static void tegra2_cdev_clk_init(struct clk *c) static int tegra2_cdev_clk_enable(struct clk *c) { + BUG_ON(!c->u.periph.clk_num); + clk_writel(PERIPH_CLK_TO_ENB_BIT(c), CLK_OUT_ENB_SET + PERIPH_CLK_TO_ENB_SET_REG(c)); return 0; @@ -1283,6 +1306,8 @@ static int tegra2_cdev_clk_enable(struct clk *c) static void tegra2_cdev_clk_disable(struct clk *c) { + BUG_ON(!c->u.periph.clk_num); + clk_writel(PERIPH_CLK_TO_ENB_BIT(c), CLK_OUT_ENB_CLR + PERIPH_CLK_TO_ENB_SET_REG(c)); } -- cgit v1.2.3-18-g5258 From 0cf6230af909a86f81907455eca2a5c9b8f68fe6 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Mon, 21 Feb 2011 17:10:14 -0800 Subject: ARM: tegra: Move tegra_common_init to tegra_init_early Move tegra_common_init to tegra_init_early, and set it as the init_early entry in the machine struct. Initializes the clocks earlier so that timers can enable their clocks. Also reorders the members in the Harmony and Trimslice boards' machine structs to match the order they are called in. Signed-off-by: Colin Cross Acked-by: Olof Johansson --- arch/arm/mach-tegra/board-harmony.c | 7 +++---- arch/arm/mach-tegra/board-trimslice.c | 7 +++---- arch/arm/mach-tegra/board.h | 2 +- arch/arm/mach-tegra/common.c | 2 +- 4 files changed, 8 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c index b9dbdb1289d..368ddff953f 100644 --- a/arch/arm/mach-tegra/board-harmony.c +++ b/arch/arm/mach-tegra/board-harmony.c @@ -104,8 +104,6 @@ static __initdata struct tegra_clk_init_table harmony_clk_init_table[] = { static void __init tegra_harmony_init(void) { - tegra_common_init(); - tegra_clk_init_from_table(harmony_clk_init_table); harmony_pinmux_init(); @@ -116,8 +114,9 @@ static void __init tegra_harmony_init(void) MACHINE_START(HARMONY, "harmony") .boot_params = 0x00000100, .fixup = tegra_harmony_fixup, - .init_irq = tegra_init_irq, - .init_machine = tegra_harmony_init, .map_io = tegra_map_common_io, + .init_early = tegra_init_early, + .init_irq = tegra_init_irq, .timer = &tegra_timer, + .init_machine = tegra_harmony_init, MACHINE_END diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c index ef233b28022..0f3081a9712 100644 --- a/arch/arm/mach-tegra/board-trimslice.c +++ b/arch/arm/mach-tegra/board-trimslice.c @@ -85,8 +85,6 @@ subsys_initcall(tegra_trimslice_pci_init); static void __init tegra_trimslice_init(void) { - tegra_common_init(); - tegra_clk_init_from_table(trimslice_clk_init_table); trimslice_pinmux_init(); @@ -97,8 +95,9 @@ static void __init tegra_trimslice_init(void) MACHINE_START(TRIMSLICE, "trimslice") .boot_params = 0x00000100, .fixup = tegra_trimslice_fixup, - .init_irq = tegra_init_irq, - .init_machine = tegra_trimslice_init, .map_io = tegra_map_common_io, + .init_early = tegra_init_early, + .init_irq = tegra_init_irq, .timer = &tegra_timer, + .init_machine = tegra_trimslice_init, MACHINE_END diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h index b3f9c94fcb9..1d14df7eb7d 100644 --- a/arch/arm/mach-tegra/board.h +++ b/arch/arm/mach-tegra/board.h @@ -25,7 +25,7 @@ void tegra_assert_system_reset(char mode, const char *cmd); -void __init tegra_common_init(void); +void __init tegra_init_early(void); void __init tegra_map_common_io(void); void __init tegra_init_irq(void); void __init tegra_init_clock(void); diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c index 54826b805b9..14fa533b1e2 100644 --- a/arch/arm/mach-tegra/common.c +++ b/arch/arm/mach-tegra/common.c @@ -72,7 +72,7 @@ void __init tegra_init_cache(void) } -void __init tegra_common_init(void) +void __init tegra_init_early(void) { tegra_init_fuse(); tegra_init_clock(); -- cgit v1.2.3-18-g5258 From 62248ae826f51ac2e3d3902c0a657043d95b731c Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Mon, 21 Feb 2011 17:04:37 -0800 Subject: ARM: tegra: timer: Enable timer and rtc clocks Enable the timer and rtc clocks to prevent them being turned off by the bootloader clock disabling code. Signed-off-by: Colin Cross Acked-by: Olof Johansson --- arch/arm/mach-tegra/timer.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c index ffa6a685974..0fcb1eb4214 100644 --- a/arch/arm/mach-tegra/timer.c +++ b/arch/arm/mach-tegra/timer.c @@ -18,6 +18,7 @@ */ #include +#include #include #include #include @@ -193,9 +194,22 @@ static struct irqaction tegra_timer_irq = { static void __init tegra_init_timer(void) { + struct clk *clk; unsigned long rate = clk_measure_input_freq(); int ret; + clk = clk_get_sys("timer", NULL); + BUG_ON(IS_ERR(clk)); + clk_enable(clk); + + /* + * rtc registers are used by read_persistent_clock, keep the rtc clock + * enabled + */ + clk = clk_get_sys("rtc-tegra", NULL); + BUG_ON(IS_ERR(clk)); + clk_enable(clk); + #ifdef CONFIG_HAVE_ARM_TWD twd_base = IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x600); #endif @@ -239,8 +253,6 @@ static void __init tegra_init_timer(void) tegra_clockevent.cpumask = cpu_all_mask; tegra_clockevent.irq = tegra_timer_irq.irq; clockevents_register_device(&tegra_clockevent); - - return; } struct sys_timer tegra_timer = { -- cgit v1.2.3-18-g5258 From cd51d0edecc37f1061a5091450e6c7e2a8a16d68 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Mon, 21 Feb 2011 17:05:36 -0800 Subject: ARM: tegra: common: Enable core clocks Enable the cpu, emc (memory controller) and csite (debug and trace controller) clocks during init to prevent them from being disabled by the bootloader clock disabling code. Signed-off-by: Colin Cross Acked-by: Olof Johansson --- arch/arm/mach-tegra/common.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c index 14fa533b1e2..516e1000ebb 100644 --- a/arch/arm/mach-tegra/common.c +++ b/arch/arm/mach-tegra/common.c @@ -56,6 +56,9 @@ static __initdata struct tegra_clk_init_table common_clk_init_table[] = { { "sclk", "pll_p_out4", 108000000, true }, { "hclk", "sclk", 108000000, true }, { "pclk", "hclk", 54000000, true }, + { "csite", NULL, 0, true }, + { "emc", NULL, 0, true }, + { "cpu", NULL, 0, true }, { NULL, NULL, 0, 0}, }; -- cgit v1.2.3-18-g5258 From e19e881fcbd08bac0e6c9187ade8e3802d8334df Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Sat, 19 Feb 2011 20:38:54 -0700 Subject: ARM: tegra: Fix typo in TEGRA_IRQ_TO_GPIO Signed-off-by: Stephen Warren Signed-off-by: Colin Cross --- arch/arm/mach-tegra/include/mach/gpio.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/include/mach/gpio.h b/arch/arm/mach-tegra/include/mach/gpio.h index e31f486d69a..12a7cf6874c 100644 --- a/arch/arm/mach-tegra/include/mach/gpio.h +++ b/arch/arm/mach-tegra/include/mach/gpio.h @@ -31,7 +31,7 @@ #define gpio_cansleep __gpio_cansleep #define TEGRA_GPIO_TO_IRQ(gpio) (INT_GPIO_BASE + (gpio)) -#define TEGRA_IRQ_TO_GPIO(irq) ((gpio) - INT_GPIO_BASE) +#define TEGRA_IRQ_TO_GPIO(irq) ((irq) - INT_GPIO_BASE) static inline int gpio_to_irq(unsigned int gpio) { -- cgit v1.2.3-18-g5258 From 38376866a1fe5b1e6d9510ec4913c2b461f456f3 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 22 Feb 2011 20:35:24 +0000 Subject: ARM: tegra: Hide EMC scaling config behind ARCH_TEGRA The option isn't terribly useful on other ARM platforms. Signed-off-by: Mark Brown Acked-by: Olof Johansson Signed-off-by: Colin Cross --- arch/arm/mach-tegra/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index cac8a79e738..bdf52f0f729 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -64,7 +64,7 @@ config TEGRA_SYSTEM_DMA Adds system DMA functionality for NVIDIA Tegra SoCs, used by several Tegra device drivers -endif - config TEGRA_EMC_SCALING_ENABLE bool "Enable scaling the memory frequency" + +endif -- cgit v1.2.3-18-g5258 From 10e82f6ce76351425644bccc56f8e2c2ad596ce6 Mon Sep 17 00:00:00 2001 From: "Luck, Tony" Date: Tue, 22 Feb 2011 11:47:04 -0800 Subject: tty: simserial: now phase out the ioctl file pointer for good Alan missed the ia64 simulator serial driver (because it was hidden in arch/... rather than located under drivers/... where one might expect to find a driver). Drop the "file *" argument from rs_ioctl() in arch/ia64/hp/sim/simserial.c Signed-off-by: Tony Luck Cc: Alan Cox , Signed-off-by: Greg Kroah-Hartman --- arch/ia64/hp/sim/simserial.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c index 13633da0d3d..bff0824cf8a 100644 --- a/arch/ia64/hp/sim/simserial.c +++ b/arch/ia64/hp/sim/simserial.c @@ -390,8 +390,7 @@ static void rs_unthrottle(struct tty_struct * tty) } -static int rs_ioctl(struct tty_struct *tty, struct file * file, - unsigned int cmd, unsigned long arg) +static int rs_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT) && -- cgit v1.2.3-18-g5258 From 4a6514e6d096716fb7bedf238efaaca877e2a7e8 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 22 Feb 2011 16:57:21 -0800 Subject: tty: move obsolete and broken tty drivers to drivers/staging/tty/ As planned by Arnd Bergmann, this moves the following drivers to the drivers/staging/tty/ directory where they will be removed after 2.6.41 if no one steps up to claim them. epca epca ip2 istallion riscom8 serial167 specialix stallion Cc: Arnd Bergmann Cc: Alan Cox Cc: Jiri Slaby Signed-off-by: Greg Kroah-Hartman --- arch/m68k/Kconfig | 8 -------- 1 file changed, 8 deletions(-) (limited to 'arch') diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index bc9271b8575..a85e251c411 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -554,14 +554,6 @@ config MVME147_SCC This is the driver for the serial ports on the Motorola MVME147 boards. Everyone using one of these boards should say Y here. -config SERIAL167 - bool "CD2401 support for MVME166/7 serial ports" - depends on MVME16x - help - This is the driver for the serial ports on the Motorola MVME166, - 167, and 172 boards. Everyone using one of these boards should say - Y here. - config MVME162_SCC bool "SCC support for MVME162 serial ports" depends on MVME16x && BROKEN -- cgit v1.2.3-18-g5258 From 632095ea15db51d73d3d084ee18620d3ac1cb040 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sun, 13 Feb 2011 19:12:27 -0800 Subject: ARM: tegra: add tegra_gpio_table and tegra_gpio_config To give one place to setup the pins that are used as GPIOs instead of as their pinmuxed functions. Specifying enabled as false explicitly disables the gpio mode of that pin (if left on by firmware). This should remove the need for calling these from specific drivers and thus reduce tegra-specific code from them. Signed-off-by: Olof Johansson Acked-by: Erik Gilling --- arch/arm/mach-tegra/gpio.c | 14 ++++++++++++++ arch/arm/mach-tegra/include/mach/gpio.h | 7 +++++++ 2 files changed, 21 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-tegra/gpio.c b/arch/arm/mach-tegra/gpio.c index 132dcd6833a..12090a2cf3e 100644 --- a/arch/arm/mach-tegra/gpio.c +++ b/arch/arm/mach-tegra/gpio.c @@ -381,6 +381,20 @@ static int __init tegra_gpio_init(void) postcore_initcall(tegra_gpio_init); +void __init tegra_gpio_config(struct tegra_gpio_table *table, int num) +{ + int i; + + for (i = 0; i < num; i++) { + int gpio = table[i].gpio; + + if (table[i].enable) + tegra_gpio_enable(gpio); + else + tegra_gpio_disable(gpio); + } +} + #ifdef CONFIG_DEBUG_FS #include diff --git a/arch/arm/mach-tegra/include/mach/gpio.h b/arch/arm/mach-tegra/include/mach/gpio.h index 12a7cf6874c..196f114dc24 100644 --- a/arch/arm/mach-tegra/include/mach/gpio.h +++ b/arch/arm/mach-tegra/include/mach/gpio.h @@ -20,6 +20,7 @@ #ifndef __MACH_TEGRA_GPIO_H #define __MACH_TEGRA_GPIO_H +#include #include #define TEGRA_NR_GPIOS INT_GPIO_NR @@ -47,6 +48,12 @@ static inline int irq_to_gpio(unsigned int irq) return -EINVAL; } +struct tegra_gpio_table { + int gpio; /* GPIO number */ + bool enable; /* Enable for GPIO at init? */ +}; + +void tegra_gpio_config(struct tegra_gpio_table *table, int num); void tegra_gpio_enable(int gpio); void tegra_gpio_disable(int gpio); -- cgit v1.2.3-18-g5258 From 0ec1b606c0b13f33816847507f9d72be30abacd1 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Tue, 22 Feb 2011 11:29:23 -0800 Subject: ARM: tegra: harmony: move over to tegra_gpio_config Move harmony over to use the new gpio config table instead of having separate settings in various parts of the code. (The tegra sdhci driver should have the tegra_gpio_* ops removed, but that will be done separately from this change.) Signed-off-by: Olof Johansson Acked-by: Erik Gilling --- arch/arm/mach-tegra/board-harmony-pinmux.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-tegra/board-harmony-pinmux.c b/arch/arm/mach-tegra/board-harmony-pinmux.c index 50b15d500ca..f3246d9f101 100644 --- a/arch/arm/mach-tegra/board-harmony-pinmux.c +++ b/arch/arm/mach-tegra/board-harmony-pinmux.c @@ -15,8 +15,10 @@ */ #include +#include #include +#include "gpio-names.h" #include "board-harmony.h" static struct tegra_pingroup_config harmony_pinmux[] = { @@ -138,7 +140,18 @@ static struct tegra_pingroup_config harmony_pinmux[] = { {TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, }; +static struct tegra_gpio_table gpio_table[] = { + { .gpio = TEGRA_GPIO_PI5, .enable = true }, /* mmc2 cd */ + { .gpio = TEGRA_GPIO_PH1, .enable = true }, /* mmc2 wp */ + { .gpio = TEGRA_GPIO_PT3, .enable = true }, /* mmc2 pwr */ + { .gpio = TEGRA_GPIO_PH2, .enable = true }, /* mmc4 cd */ + { .gpio = TEGRA_GPIO_PH3, .enable = true }, /* mmc4 wp */ + { .gpio = TEGRA_GPIO_PI6, .enable = true }, /* mmc4 pwr */ +}; + void harmony_pinmux_init(void) { tegra_pinmux_config_table(harmony_pinmux, ARRAY_SIZE(harmony_pinmux)); + + tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table)); } -- cgit v1.2.3-18-g5258 From 85940b4a1761aa5ab8d0ac1557756953788af155 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sat, 19 Feb 2011 16:26:18 -0800 Subject: ARM: tegra: common device resources Add a common location to register resources for used on-chip devices that are commonly configured on boards. Devices will be added to this file as more drivers are added that can make use of them. This is based on work contributed by several people, most of it from Colin Cross and Erik Gilling. Signed-off-by: Olof Johansson Acked-by: Colin Cross --- arch/arm/mach-tegra/Makefile | 1 + arch/arm/mach-tegra/devices.c | 505 ++++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-tegra/devices.h | 46 ++++ 3 files changed, 552 insertions(+) create mode 100644 arch/arm/mach-tegra/devices.c create mode 100644 arch/arm/mach-tegra/devices.h (limited to 'arch') diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index 3fe357bc763..c530dba75d6 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -1,4 +1,5 @@ obj-y += common.o +obj-y += devices.o obj-y += io.o obj-y += irq.o legacy_irq.o obj-y += clock.o diff --git a/arch/arm/mach-tegra/devices.c b/arch/arm/mach-tegra/devices.c new file mode 100644 index 00000000000..682e6d33108 --- /dev/null +++ b/arch/arm/mach-tegra/devices.c @@ -0,0 +1,505 @@ +/* + * Copyright (C) 2010,2011 Google, Inc. + * + * Author: + * Colin Cross + * Erik Gilling + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static struct resource i2c_resource1[] = { + [0] = { + .start = INT_I2C, + .end = INT_I2C, + .flags = IORESOURCE_IRQ, + }, + [1] = { + .start = TEGRA_I2C_BASE, + .end = TEGRA_I2C_BASE + TEGRA_I2C_SIZE-1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct resource i2c_resource2[] = { + [0] = { + .start = INT_I2C2, + .end = INT_I2C2, + .flags = IORESOURCE_IRQ, + }, + [1] = { + .start = TEGRA_I2C2_BASE, + .end = TEGRA_I2C2_BASE + TEGRA_I2C2_SIZE-1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct resource i2c_resource3[] = { + [0] = { + .start = INT_I2C3, + .end = INT_I2C3, + .flags = IORESOURCE_IRQ, + }, + [1] = { + .start = TEGRA_I2C3_BASE, + .end = TEGRA_I2C3_BASE + TEGRA_I2C3_SIZE-1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct resource i2c_resource4[] = { + [0] = { + .start = INT_DVC, + .end = INT_DVC, + .flags = IORESOURCE_IRQ, + }, + [1] = { + .start = TEGRA_DVC_BASE, + .end = TEGRA_DVC_BASE + TEGRA_DVC_SIZE-1, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device tegra_i2c_device1 = { + .name = "tegra-i2c", + .id = 0, + .resource = i2c_resource1, + .num_resources = ARRAY_SIZE(i2c_resource1), + .dev = { + .platform_data = 0, + }, +}; + +struct platform_device tegra_i2c_device2 = { + .name = "tegra-i2c", + .id = 1, + .resource = i2c_resource2, + .num_resources = ARRAY_SIZE(i2c_resource2), + .dev = { + .platform_data = 0, + }, +}; + +struct platform_device tegra_i2c_device3 = { + .name = "tegra-i2c", + .id = 2, + .resource = i2c_resource3, + .num_resources = ARRAY_SIZE(i2c_resource3), + .dev = { + .platform_data = 0, + }, +}; + +struct platform_device tegra_i2c_device4 = { + .name = "tegra-i2c", + .id = 3, + .resource = i2c_resource4, + .num_resources = ARRAY_SIZE(i2c_resource4), + .dev = { + .platform_data = 0, + }, +}; + +static struct resource spi_resource1[] = { + [0] = { + .start = INT_S_LINK1, + .end = INT_S_LINK1, + .flags = IORESOURCE_IRQ, + }, + [1] = { + .start = TEGRA_SPI1_BASE, + .end = TEGRA_SPI1_BASE + TEGRA_SPI1_SIZE-1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct resource spi_resource2[] = { + [0] = { + .start = INT_SPI_2, + .end = INT_SPI_2, + .flags = IORESOURCE_IRQ, + }, + [1] = { + .start = TEGRA_SPI2_BASE, + .end = TEGRA_SPI2_BASE + TEGRA_SPI2_SIZE-1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct resource spi_resource3[] = { + [0] = { + .start = INT_SPI_3, + .end = INT_SPI_3, + .flags = IORESOURCE_IRQ, + }, + [1] = { + .start = TEGRA_SPI3_BASE, + .end = TEGRA_SPI3_BASE + TEGRA_SPI3_SIZE-1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct resource spi_resource4[] = { + [0] = { + .start = INT_SPI_4, + .end = INT_SPI_4, + .flags = IORESOURCE_IRQ, + }, + [1] = { + .start = TEGRA_SPI4_BASE, + .end = TEGRA_SPI4_BASE + TEGRA_SPI4_SIZE-1, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device tegra_spi_device1 = { + .name = "spi_tegra", + .id = 0, + .resource = spi_resource1, + .num_resources = ARRAY_SIZE(spi_resource1), + .dev = { + .coherent_dma_mask = 0xffffffff, + }, +}; + +struct platform_device tegra_spi_device2 = { + .name = "spi_tegra", + .id = 1, + .resource = spi_resource2, + .num_resources = ARRAY_SIZE(spi_resource2), + .dev = { + .coherent_dma_mask = 0xffffffff, + }, +}; + +struct platform_device tegra_spi_device3 = { + .name = "spi_tegra", + .id = 2, + .resource = spi_resource3, + .num_resources = ARRAY_SIZE(spi_resource3), + .dev = { + .coherent_dma_mask = 0xffffffff, + }, +}; + +struct platform_device tegra_spi_device4 = { + .name = "spi_tegra", + .id = 3, + .resource = spi_resource4, + .num_resources = ARRAY_SIZE(spi_resource4), + .dev = { + .coherent_dma_mask = 0xffffffff, + }, +}; + + +static struct resource sdhci_resource1[] = { + [0] = { + .start = INT_SDMMC1, + .end = INT_SDMMC1, + .flags = IORESOURCE_IRQ, + }, + [1] = { + .start = TEGRA_SDMMC1_BASE, + .end = TEGRA_SDMMC1_BASE + TEGRA_SDMMC1_SIZE-1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct resource sdhci_resource2[] = { + [0] = { + .start = INT_SDMMC2, + .end = INT_SDMMC2, + .flags = IORESOURCE_IRQ, + }, + [1] = { + .start = TEGRA_SDMMC2_BASE, + .end = TEGRA_SDMMC2_BASE + TEGRA_SDMMC2_SIZE-1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct resource sdhci_resource3[] = { + [0] = { + .start = INT_SDMMC3, + .end = INT_SDMMC3, + .flags = IORESOURCE_IRQ, + }, + [1] = { + .start = TEGRA_SDMMC3_BASE, + .end = TEGRA_SDMMC3_BASE + TEGRA_SDMMC3_SIZE-1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct resource sdhci_resource4[] = { + [0] = { + .start = INT_SDMMC4, + .end = INT_SDMMC4, + .flags = IORESOURCE_IRQ, + }, + [1] = { + .start = TEGRA_SDMMC4_BASE, + .end = TEGRA_SDMMC4_BASE + TEGRA_SDMMC4_SIZE-1, + .flags = IORESOURCE_MEM, + }, +}; + +/* board files should fill in platform_data register the devices themselvs. + * See board-harmony.c for an example + */ +struct platform_device tegra_sdhci_device1 = { + .name = "sdhci-tegra", + .id = 0, + .resource = sdhci_resource1, + .num_resources = ARRAY_SIZE(sdhci_resource1), +}; + +struct platform_device tegra_sdhci_device2 = { + .name = "sdhci-tegra", + .id = 1, + .resource = sdhci_resource2, + .num_resources = ARRAY_SIZE(sdhci_resource2), +}; + +struct platform_device tegra_sdhci_device3 = { + .name = "sdhci-tegra", + .id = 2, + .resource = sdhci_resource3, + .num_resources = ARRAY_SIZE(sdhci_resource3), +}; + +struct platform_device tegra_sdhci_device4 = { + .name = "sdhci-tegra", + .id = 3, + .resource = sdhci_resource4, + .num_resources = ARRAY_SIZE(sdhci_resource4), +}; + +static struct resource tegra_usb1_resources[] = { + [0] = { + .start = TEGRA_USB_BASE, + .end = TEGRA_USB_BASE + TEGRA_USB_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = INT_USB, + .end = INT_USB, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource tegra_usb2_resources[] = { + [0] = { + .start = TEGRA_USB2_BASE, + .end = TEGRA_USB2_BASE + TEGRA_USB2_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = INT_USB2, + .end = INT_USB2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource tegra_usb3_resources[] = { + [0] = { + .start = TEGRA_USB3_BASE, + .end = TEGRA_USB3_BASE + TEGRA_USB3_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = INT_USB3, + .end = INT_USB3, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 tegra_ehci_dmamask = DMA_BIT_MASK(32); + +struct platform_device tegra_ehci1_device = { + .name = "tegra-ehci", + .id = 0, + .dev = { + .dma_mask = &tegra_ehci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = tegra_usb1_resources, + .num_resources = ARRAY_SIZE(tegra_usb1_resources), +}; + +struct platform_device tegra_ehci2_device = { + .name = "tegra-ehci", + .id = 1, + .dev = { + .dma_mask = &tegra_ehci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = tegra_usb2_resources, + .num_resources = ARRAY_SIZE(tegra_usb2_resources), +}; + +struct platform_device tegra_ehci3_device = { + .name = "tegra-ehci", + .id = 2, + .dev = { + .dma_mask = &tegra_ehci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = tegra_usb3_resources, + .num_resources = ARRAY_SIZE(tegra_usb3_resources), +}; + +static struct resource tegra_pmu_resources[] = { + [0] = { + .start = INT_CPU0_PMU_INTR, + .end = INT_CPU0_PMU_INTR, + .flags = IORESOURCE_IRQ, + }, + [1] = { + .start = INT_CPU1_PMU_INTR, + .end = INT_CPU1_PMU_INTR, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device tegra_pmu_device = { + .name = "arm-pmu", + .id = ARM_PMU_DEVICE_CPU, + .num_resources = ARRAY_SIZE(tegra_pmu_resources), + .resource = tegra_pmu_resources, +}; + +static struct resource tegra_uarta_resources[] = { + [0] = { + .start = TEGRA_UARTA_BASE, + .end = TEGRA_UARTA_BASE + TEGRA_UARTA_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = INT_UARTA, + .end = INT_UARTA, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource tegra_uartb_resources[] = { + [0] = { + .start = TEGRA_UARTB_BASE, + .end = TEGRA_UARTB_BASE + TEGRA_UARTB_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = INT_UARTB, + .end = INT_UARTB, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource tegra_uartc_resources[] = { + [0] = { + .start = TEGRA_UARTC_BASE, + .end = TEGRA_UARTC_BASE + TEGRA_UARTC_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = INT_UARTC, + .end = INT_UARTC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource tegra_uartd_resources[] = { + [0] = { + .start = TEGRA_UARTD_BASE, + .end = TEGRA_UARTD_BASE + TEGRA_UARTD_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = INT_UARTD, + .end = INT_UARTD, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource tegra_uarte_resources[] = { + [0] = { + .start = TEGRA_UARTE_BASE, + .end = TEGRA_UARTE_BASE + TEGRA_UARTE_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = INT_UARTE, + .end = INT_UARTE, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device tegra_uarta_device = { + .name = "tegra_uart", + .id = 0, + .num_resources = ARRAY_SIZE(tegra_uarta_resources), + .resource = tegra_uarta_resources, + .dev = { + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +struct platform_device tegra_uartb_device = { + .name = "tegra_uart", + .id = 1, + .num_resources = ARRAY_SIZE(tegra_uartb_resources), + .resource = tegra_uartb_resources, + .dev = { + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +struct platform_device tegra_uartc_device = { + .name = "tegra_uart", + .id = 2, + .num_resources = ARRAY_SIZE(tegra_uartc_resources), + .resource = tegra_uartc_resources, + .dev = { + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +struct platform_device tegra_uartd_device = { + .name = "tegra_uart", + .id = 3, + .num_resources = ARRAY_SIZE(tegra_uartd_resources), + .resource = tegra_uartd_resources, + .dev = { + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +struct platform_device tegra_uarte_device = { + .name = "tegra_uart", + .id = 4, + .num_resources = ARRAY_SIZE(tegra_uarte_resources), + .resource = tegra_uarte_resources, + .dev = { + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; diff --git a/arch/arm/mach-tegra/devices.h b/arch/arm/mach-tegra/devices.h new file mode 100644 index 00000000000..888810c37ee --- /dev/null +++ b/arch/arm/mach-tegra/devices.h @@ -0,0 +1,46 @@ +/* + * Copyright (C) 2010,2011 Google, Inc. + * + * Author: + * Colin Cross + * Erik Gilling + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __MACH_TEGRA_DEVICES_H +#define __MACH_TEGRA_DEVICES_H + +#include + +extern struct platform_device tegra_sdhci_device1; +extern struct platform_device tegra_sdhci_device2; +extern struct platform_device tegra_sdhci_device3; +extern struct platform_device tegra_sdhci_device4; +extern struct platform_device tegra_i2c_device1; +extern struct platform_device tegra_i2c_device2; +extern struct platform_device tegra_i2c_device3; +extern struct platform_device tegra_i2c_device4; +extern struct platform_device tegra_spi_device1; +extern struct platform_device tegra_spi_device2; +extern struct platform_device tegra_spi_device3; +extern struct platform_device tegra_spi_device4; +extern struct platform_device tegra_ehci1_device; +extern struct platform_device tegra_ehci2_device; +extern struct platform_device tegra_ehci3_device; +extern struct platform_device tegra_uarta_device; +extern struct platform_device tegra_uartb_device; +extern struct platform_device tegra_uartc_device; +extern struct platform_device tegra_uartd_device; +extern struct platform_device tegra_uarte_device; +extern struct platform_device tegra_pmu_device; + +#endif -- cgit v1.2.3-18-g5258 From ec243a071d32af0350449c220d1de7c437088879 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sat, 19 Feb 2011 21:01:46 -0800 Subject: ARM: tegra: remove stale nvidia atag handler Remove dead atag handling code for nvidia-specific tags. Signed-off-by: Olof Johansson Acked-by: Colin Cross --- arch/arm/mach-tegra/board-harmony.c | 25 ------------------------- 1 file changed, 25 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c index 368ddff953f..f4c41c010e1 100644 --- a/arch/arm/mach-tegra/board-harmony.c +++ b/arch/arm/mach-tegra/board-harmony.c @@ -35,31 +35,6 @@ #include "board-harmony.h" #include "clock.h" -/* NVidia bootloader tags */ -#define ATAG_NVIDIA 0x41000801 - -#define ATAG_NVIDIA_RM 0x1 -#define ATAG_NVIDIA_DISPLAY 0x2 -#define ATAG_NVIDIA_FRAMEBUFFER 0x3 -#define ATAG_NVIDIA_CHIPSHMOO 0x4 -#define ATAG_NVIDIA_CHIPSHMOOPHYS 0x5 -#define ATAG_NVIDIA_PRESERVED_MEM_0 0x10000 -#define ATAG_NVIDIA_PRESERVED_MEM_N 2 -#define ATAG_NVIDIA_FORCE_32 0x7fffffff - -struct tag_tegra { - __u32 bootarg_key; - __u32 bootarg_len; - char bootarg[1]; -}; - -static int __init parse_tag_nvidia(const struct tag *tag) -{ - - return 0; -} -__tagtable(ATAG_NVIDIA, parse_tag_nvidia); - static struct plat_serial8250_port debug_uart_platform_data[] = { { .membase = IO_ADDRESS(TEGRA_UARTD_BASE), -- cgit v1.2.3-18-g5258 From 875d4af6a3bdf548ebf069c1f4254c6ae1edae93 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sat, 19 Feb 2011 16:39:37 -0800 Subject: ARM: tegra: harmony: register sdhci devices Add the 3 sdhci devices that are available on Harmony as platform devices. Two go to slots (one 4-lane, one 8-lane), and one goes to onboard wifi. Signed-off-by: Olof Johansson Acked-by: Colin Cross --- arch/arm/mach-tegra/board-harmony.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c index f4c41c010e1..49224e936eb 100644 --- a/arch/arm/mach-tegra/board-harmony.c +++ b/arch/arm/mach-tegra/board-harmony.c @@ -30,10 +30,13 @@ #include #include +#include #include "board.h" #include "board-harmony.h" #include "clock.h" +#include "devices.h" +#include "gpio-names.h" static struct plat_serial8250_port debug_uart_platform_data[] = { { @@ -59,6 +62,9 @@ static struct platform_device debug_uart = { static struct platform_device *harmony_devices[] __initdata = { &debug_uart, + &tegra_sdhci_device1, + &tegra_sdhci_device2, + &tegra_sdhci_device4, }; static void __init tegra_harmony_fixup(struct machine_desc *desc, @@ -77,12 +83,36 @@ static __initdata struct tegra_clk_init_table harmony_clk_init_table[] = { { NULL, NULL, 0, 0}, }; + +static struct tegra_sdhci_platform_data sdhci_pdata1 = { + .cd_gpio = -1, + .wp_gpio = -1, + .power_gpio = -1, +}; + +static struct tegra_sdhci_platform_data sdhci_pdata2 = { + .cd_gpio = TEGRA_GPIO_PI5, + .wp_gpio = TEGRA_GPIO_PH1, + .power_gpio = TEGRA_GPIO_PT3, +}; + +static struct tegra_sdhci_platform_data sdhci_pdata4 = { + .cd_gpio = TEGRA_GPIO_PH2, + .wp_gpio = TEGRA_GPIO_PH3, + .power_gpio = TEGRA_GPIO_PI6, + .is_8bit = 1, +}; + static void __init tegra_harmony_init(void) { tegra_clk_init_from_table(harmony_clk_init_table); harmony_pinmux_init(); + tegra_sdhci_device1.dev.platform_data = &sdhci_pdata1; + tegra_sdhci_device2.dev.platform_data = &sdhci_pdata2; + tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4; + platform_add_devices(harmony_devices, ARRAY_SIZE(harmony_devices)); } -- cgit v1.2.3-18-g5258 From 8c396604d5de26a48a390cf442dd3b04a20f13b1 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sun, 20 Feb 2011 16:20:26 -0800 Subject: ARM: tegra: harmony: fix pinmux for MMC slot Turns out MMC2 (the bayonet 4-lane port) wasn't enabled in the original pinmux. Fix that. Signed-off-by: Olof Johansson Acked-by: Colin Cross --- arch/arm/mach-tegra/board-harmony-pinmux.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/board-harmony-pinmux.c b/arch/arm/mach-tegra/board-harmony-pinmux.c index f3246d9f101..98368d947be 100644 --- a/arch/arm/mach-tegra/board-harmony-pinmux.c +++ b/arch/arm/mach-tegra/board-harmony-pinmux.c @@ -36,10 +36,10 @@ static struct tegra_pingroup_config harmony_pinmux[] = { {TEGRA_PINGROUP_DAP3, TEGRA_MUX_DAP3, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_DAP4, TEGRA_MUX_DAP4, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_DDC, TEGRA_MUX_I2C2, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, - {TEGRA_PINGROUP_DTA, TEGRA_MUX_SDIO2, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, - {TEGRA_PINGROUP_DTB, TEGRA_MUX_RSVD1, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_DTA, TEGRA_MUX_SDIO2, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_DTB, TEGRA_MUX_RSVD1, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_DTC, TEGRA_MUX_RSVD1, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, - {TEGRA_PINGROUP_DTD, TEGRA_MUX_SDIO2, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_DTD, TEGRA_MUX_SDIO2, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_DTE, TEGRA_MUX_RSVD1, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_DTF, TEGRA_MUX_I2C3, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_GMA, TEGRA_MUX_SDIO4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, -- cgit v1.2.3-18-g5258 From d9a51fe75da73084b6c38f7f4450ad4c1bef8224 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sat, 19 Feb 2011 17:25:32 -0800 Subject: ARM: tegra: add seaboard, wario and kaen boards This adds board support for the Seaboard eval platform and some of the derivatives that are very similar. Since they only differ in some very minor ways, most of the code is shared. Signed-off-by: Olof Johansson Acked-by: Colin Cross --- arch/arm/mach-tegra/Kconfig | 19 +++ arch/arm/mach-tegra/Makefile | 3 + arch/arm/mach-tegra/board-seaboard-pinmux.c | 179 +++++++++++++++++++++++++ arch/arm/mach-tegra/board-seaboard.c | 196 ++++++++++++++++++++++++++++ arch/arm/mach-tegra/board-seaboard.h | 38 ++++++ 5 files changed, 435 insertions(+) create mode 100644 arch/arm/mach-tegra/board-seaboard-pinmux.c create mode 100644 arch/arm/mach-tegra/board-seaboard.c create mode 100644 arch/arm/mach-tegra/board-seaboard.h (limited to 'arch') diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index bdf52f0f729..b94e52df0d8 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -27,12 +27,31 @@ config MACH_HARMONY help Support for nVidia Harmony development platform +config MACH_KAEN + bool "Kaen board" + select MACH_SEABOARD + help + Support for the Kaen version of Seaboard + +config MACH_SEABOARD + bool "Seaboard board" + help + Support for nVidia Seaboard development platform. It will + also be included for some of the derivative boards that + have large similarities with the seaboard design. + config MACH_TRIMSLICE bool "TrimSlice board" select TEGRA_PCI help Support for CompuLab TrimSlice platform +config MACH_WARIO + bool "Wario board" + select MACH_SEABOARD + help + Support for the Wario version of Seaboard + choice prompt "Low-level debug console UART" default TEGRA_DEBUG_UART_NONE diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index c530dba75d6..9bf39fa34d8 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -22,5 +22,8 @@ obj-${CONFIG_MACH_HARMONY} += board-harmony.o obj-${CONFIG_MACH_HARMONY} += board-harmony-pinmux.o obj-${CONFIG_MACH_HARMONY} += board-harmony-pcie.o +obj-${CONFIG_MACH_SEABOARD} += board-seaboard.o +obj-${CONFIG_MACH_SEABOARD} += board-seaboard-pinmux.o + obj-${CONFIG_MACH_TRIMSLICE} += board-trimslice.o obj-${CONFIG_MACH_TRIMSLICE} += board-trimslice-pinmux.o diff --git a/arch/arm/mach-tegra/board-seaboard-pinmux.c b/arch/arm/mach-tegra/board-seaboard-pinmux.c new file mode 100644 index 00000000000..2d6ad83ed4b --- /dev/null +++ b/arch/arm/mach-tegra/board-seaboard-pinmux.c @@ -0,0 +1,179 @@ +/* + * Copyright (C) 2010 NVIDIA Corporation + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include + +#include +#include + +#include "gpio-names.h" +#include "board-seaboard.h" + +#define DEFAULT_DRIVE(_name) \ + { \ + .pingroup = TEGRA_DRIVE_PINGROUP_##_name, \ + .hsm = TEGRA_HSM_DISABLE, \ + .schmitt = TEGRA_SCHMITT_ENABLE, \ + .drive = TEGRA_DRIVE_DIV_1, \ + .pull_down = TEGRA_PULL_31, \ + .pull_up = TEGRA_PULL_31, \ + .slew_rising = TEGRA_SLEW_SLOWEST, \ + .slew_falling = TEGRA_SLEW_SLOWEST, \ + } + +static __initdata struct tegra_drive_pingroup_config seaboard_drive_pinmux[] = { + DEFAULT_DRIVE(SDIO1), +}; + +static __initdata struct tegra_pingroup_config seaboard_pinmux[] = { + {TEGRA_PINGROUP_ATA, TEGRA_MUX_IDE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_ATB, TEGRA_MUX_SDIO4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_ATC, TEGRA_MUX_NAND, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_ATD, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_ATE, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_CDEV1, TEGRA_MUX_PLLA_OUT, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_CDEV2, TEGRA_MUX_PLLP_OUT4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_CRTP, TEGRA_MUX_CRT, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_CSUS, TEGRA_MUX_VI_SENSOR_CLK, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_DAP1, TEGRA_MUX_DAP1, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_DAP2, TEGRA_MUX_DAP2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_DAP3, TEGRA_MUX_DAP3, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_DAP4, TEGRA_MUX_DAP4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_DDC, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_DTA, TEGRA_MUX_VI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_DTB, TEGRA_MUX_VI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_DTC, TEGRA_MUX_VI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_DTD, TEGRA_MUX_VI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_DTE, TEGRA_MUX_VI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_DTF, TEGRA_MUX_I2C3, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_GMA, TEGRA_MUX_SDIO4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_GMB, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_GMC, TEGRA_MUX_UARTD, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_GMD, TEGRA_MUX_SFLASH, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_GME, TEGRA_MUX_SDIO4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_GPU, TEGRA_MUX_PWM, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_GPU7, TEGRA_MUX_RTCK, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_GPV, TEGRA_MUX_PCIE, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_HDINT, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_I2CP, TEGRA_MUX_I2C, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_IRRX, TEGRA_MUX_UARTB, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_IRTX, TEGRA_MUX_UARTB, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_KBCA, TEGRA_MUX_KBC, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_KBCB, TEGRA_MUX_KBC, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_KBCC, TEGRA_MUX_KBC, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_KBCD, TEGRA_MUX_KBC, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_KBCE, TEGRA_MUX_KBC, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_KBCF, TEGRA_MUX_KBC, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LCSN, TEGRA_MUX_RSVD4, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LD0, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD1, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD10, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD11, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD12, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD13, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD14, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD15, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD16, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD17, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD2, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD3, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD4, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD5, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD6, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD7, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD8, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LD9, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LDC, TEGRA_MUX_RSVD4, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LDI, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LHP0, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LHP1, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LHP2, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LHS, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LM0, TEGRA_MUX_RSVD4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LM1, TEGRA_MUX_CRT, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LPP, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LPW0, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LPW1, TEGRA_MUX_RSVD4, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LPW2, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LSC0, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LSC1, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LSCK, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LSDA, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LSDI, TEGRA_MUX_RSVD4, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LSPI, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LVP0, TEGRA_MUX_RSVD4, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LVP1, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LVS, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_OWC, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_PMC, TEGRA_MUX_PWR_ON, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_PTA, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_RM, TEGRA_MUX_I2C, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_SDB, TEGRA_MUX_SDIO3, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_SDC, TEGRA_MUX_SDIO3, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_SDD, TEGRA_MUX_SDIO3, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_SDIO1, TEGRA_MUX_SDIO1, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_SLXA, TEGRA_MUX_PCIE, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SLXC, TEGRA_MUX_SPDIF, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SLXD, TEGRA_MUX_SPDIF, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_SLXK, TEGRA_MUX_PCIE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_SPDI, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_SPDO, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_SPIA, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SPIB, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SPIC, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SPID, TEGRA_MUX_SPI1, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SPIE, TEGRA_MUX_SPI1, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SPIF, TEGRA_MUX_SPI1, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SPIG, TEGRA_MUX_SPI2_ALT, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SPIH, TEGRA_MUX_SPI2_ALT, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_UAA, TEGRA_MUX_ULPI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_UAB, TEGRA_MUX_ULPI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_UAC, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_UAD, TEGRA_MUX_IRDA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_UCA, TEGRA_MUX_UARTC, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_UCB, TEGRA_MUX_UARTC, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_UDA, TEGRA_MUX_ULPI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_CK32, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_DDRC, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_PMCA, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_PMCB, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_PMCC, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_PMCD, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_PMCE, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_XM2C, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, +}; + + + + +static struct tegra_gpio_table gpio_table[] = { + { .gpio = TEGRA_GPIO_PI5, .enable = true }, /* mmc2 cd */ + { .gpio = TEGRA_GPIO_PH1, .enable = true }, /* mmc2 wp */ + { .gpio = TEGRA_GPIO_PI6, .enable = true }, /* mmc2 pwr */ + { .gpio = TEGRA_GPIO_LIDSWITCH, .enable = true }, /* lid switch */ + { .gpio = TEGRA_GPIO_POWERKEY, .enable = true }, /* power key */ +}; + +void __init seaboard_pinmux_init(void) +{ + tegra_pinmux_config_table(seaboard_pinmux, ARRAY_SIZE(seaboard_pinmux)); + + tegra_drive_pinmux_config_table(seaboard_drive_pinmux, + ARRAY_SIZE(seaboard_drive_pinmux)); + + tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table)); +} diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c new file mode 100644 index 00000000000..6ca9e61f6cd --- /dev/null +++ b/arch/arm/mach-tegra/board-seaboard.c @@ -0,0 +1,196 @@ +/* + * Copyright (c) 2010, 2011 NVIDIA Corporation. + * Copyright (C) 2010, 2011 Google, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + +#include "board.h" +#include "board-seaboard.h" +#include "clock.h" +#include "devices.h" +#include "gpio-names.h" + +static struct plat_serial8250_port debug_uart_platform_data[] = { + { + /* Memory and IRQ filled in before registration */ + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = 216000000, + }, { + .flags = 0, + } +}; + +static struct platform_device debug_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = debug_uart_platform_data, + }, +}; + +static __initdata struct tegra_clk_init_table seaboard_clk_init_table[] = { + /* name parent rate enabled */ + { "uartb", "pll_p", 216000000, true}, + { "uartd", "pll_p", 216000000, true}, + { NULL, NULL, 0, 0}, +}; + +static struct gpio_keys_button seaboard_gpio_keys_buttons[] = { + { + .code = SW_LID, + .gpio = TEGRA_GPIO_LIDSWITCH, + .active_low = 0, + .desc = "Lid", + .type = EV_SW, + .wakeup = 1, + .debounce_interval = 1, + }, + { + .code = KEY_POWER, + .gpio = TEGRA_GPIO_POWERKEY, + .active_low = 1, + .desc = "Power", + .type = EV_KEY, + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data seaboard_gpio_keys = { + .buttons = seaboard_gpio_keys_buttons, + .nbuttons = ARRAY_SIZE(seaboard_gpio_keys_buttons), +}; + +static struct platform_device seaboard_gpio_keys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &seaboard_gpio_keys, + } +}; + +static struct tegra_sdhci_platform_data sdhci_pdata1 = { + .cd_gpio = -1, + .wp_gpio = -1, + .power_gpio = -1, +}; + +static struct tegra_sdhci_platform_data sdhci_pdata3 = { + .cd_gpio = TEGRA_GPIO_PI5, + .wp_gpio = TEGRA_GPIO_PH1, + .power_gpio = TEGRA_GPIO_PI6, +}; + +static struct tegra_sdhci_platform_data sdhci_pdata4 = { + .cd_gpio = -1, + .wp_gpio = -1, + .power_gpio = -1, + .is_8bit = 1, +}; + +static struct platform_device *seaboard_devices[] __initdata = { + &debug_uart, + &tegra_pmu_device, + &tegra_sdhci_device1, + &tegra_sdhci_device3, + &tegra_sdhci_device4, + &seaboard_gpio_keys_device, +}; + +static void __init __tegra_seaboard_init(void) +{ + seaboard_pinmux_init(); + + tegra_clk_init_from_table(seaboard_clk_init_table); + + tegra_sdhci_device1.dev.platform_data = &sdhci_pdata1; + tegra_sdhci_device3.dev.platform_data = &sdhci_pdata3; + tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4; + + platform_add_devices(seaboard_devices, ARRAY_SIZE(seaboard_devices)); +} + +static void __init tegra_seaboard_init(void) +{ + /* Seaboard uses UARTD for the debug port. */ + debug_uart_platform_data[0].membase = IO_ADDRESS(TEGRA_UARTD_BASE); + debug_uart_platform_data[0].mapbase = TEGRA_UARTD_BASE; + debug_uart_platform_data[0].irq = INT_UARTD; + + __tegra_seaboard_init(); +} + +static void __init tegra_kaen_init(void) +{ + /* Kaen uses UARTB for the debug port. */ + debug_uart_platform_data[0].membase = IO_ADDRESS(TEGRA_UARTB_BASE); + debug_uart_platform_data[0].mapbase = TEGRA_UARTB_BASE; + debug_uart_platform_data[0].irq = INT_UARTB; + + __tegra_seaboard_init(); +} + +static void __init tegra_wario_init(void) +{ + /* Wario uses UARTB for the debug port. */ + debug_uart_platform_data[0].membase = IO_ADDRESS(TEGRA_UARTB_BASE); + debug_uart_platform_data[0].mapbase = TEGRA_UARTB_BASE; + debug_uart_platform_data[0].irq = INT_UARTB; + + __tegra_seaboard_init(); +} + + +MACHINE_START(SEABOARD, "seaboard") + .boot_params = 0x00000100, + .map_io = tegra_map_common_io, + .init_early = tegra_init_early, + .init_irq = tegra_init_irq, + .timer = &tegra_timer, + .init_machine = tegra_seaboard_init, +MACHINE_END + +MACHINE_START(KAEN, "kaen") + .boot_params = 0x00000100, + .map_io = tegra_map_common_io, + .init_early = tegra_init_early, + .init_irq = tegra_init_irq, + .timer = &tegra_timer, + .init_machine = tegra_kaen_init, +MACHINE_END + +MACHINE_START(WARIO, "wario") + .boot_params = 0x00000100, + .map_io = tegra_map_common_io, + .init_early = tegra_init_early, + .init_irq = tegra_init_irq, + .timer = &tegra_timer, + .init_machine = tegra_wario_init, +MACHINE_END diff --git a/arch/arm/mach-tegra/board-seaboard.h b/arch/arm/mach-tegra/board-seaboard.h new file mode 100644 index 00000000000..a098e359973 --- /dev/null +++ b/arch/arm/mach-tegra/board-seaboard.h @@ -0,0 +1,38 @@ +/* + * arch/arm/mach-tegra/board-seaboard.h + * + * Copyright (C) 2010 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef _MACH_TEGRA_BOARD_SEABOARD_H +#define _MACH_TEGRA_BOARD_SEABOARD_H + +#define TEGRA_GPIO_LIDSWITCH TEGRA_GPIO_PC7 +#define TEGRA_GPIO_USB1 TEGRA_GPIO_PD0 +#define TEGRA_GPIO_POWERKEY TEGRA_GPIO_PV2 +#define TEGRA_GPIO_BACKLIGHT TEGRA_GPIO_PD4 +#define TEGRA_GPIO_LVDS_SHUTDOWN TEGRA_GPIO_PB2 +#define TEGRA_GPIO_BACKLIGHT_PWM TEGRA_GPIO_PU5 +#define TEGRA_GPIO_BACKLIGHT_VDD TEGRA_GPIO_PW0 +#define TEGRA_GPIO_EN_VDD_PNL TEGRA_GPIO_PC6 +#define TEGRA_GPIO_MAGNETOMETER TEGRA_GPIO_PN5 +#define TEGRA_GPIO_ISL29018_IRQ TEGRA_GPIO_PZ2 +#define TEGRA_GPIO_AC_ONLINE TEGRA_GPIO_PV3 + +#define TPS_GPIO_BASE TEGRA_NR_GPIOS + +#define TPS_GPIO_WWAN_PWR (TPS_GPIO_BASE + 2) + +void seaboard_pinmux_init(void); + +#endif -- cgit v1.2.3-18-g5258 From ea68c00e2623bb5b001c2117a4dcca4754781b4e Mon Sep 17 00:00:00 2001 From: John Ogness Date: Tue, 22 Feb 2011 20:00:47 -0700 Subject: OMAP2/3: clock: fix fint calculation for DPLL_FREQSEL In OMAP35X TRM Rev 2010-05 Figure 7-18 "DPLL With EMI Reduction Feature", it is shown that the internal frequency is calculated by CLK_IN/(N+1). However, the value passed to _dpll_test_fint() is already "N+1" since Linux is using the values to divide by. In the technical reference manual, "N" is referring to the divider's register value (0-127). During power management testing, it was observed that programming the wrong jitter correction value can cause the system to become unstable and eventually crash. Signed-off-by: John Ogness [paul@pwsan.com: added second paragraph to commit message] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clkt_dpll.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c index 337392c3f54..acb7ae5b0a2 100644 --- a/arch/arm/mach-omap2/clkt_dpll.c +++ b/arch/arm/mach-omap2/clkt_dpll.c @@ -77,7 +77,7 @@ static int _dpll_test_fint(struct clk *clk, u8 n) dd = clk->dpll_data; /* DPLL divider must result in a valid jitter correction val */ - fint = clk->parent->rate / (n + 1); + fint = clk->parent->rate / n; if (fint < DPLL_FINT_BAND1_MIN) { pr_debug("rejecting n=%d due to Fint failure, " -- cgit v1.2.3-18-g5258 From 996746ca127d722c279325552cdcc48b20079a61 Mon Sep 17 00:00:00 2001 From: Senthilvadivu Guruswamy Date: Tue, 22 Feb 2011 09:50:36 +0200 Subject: OMAP2420: hwmod data: add DSS DISPC RFBI VENC Hwmod needs database of all IPs in a system. This patch generates the hwmod database for OMAP2420 Display Sub System,. Since DSS is also considered as an IP as DISPC, RFBI, name it as dss_core. Acked-by: Benoit Cousson Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman Signed-off-by: Sumit Semwal Signed-off-by: Senthilvadivu Guruswamy Signed-off-by: Tomi Valkeinen --- arch/arm/mach-omap2/omap_hwmod_2420_data.c | 310 +++++++++++++++++++++++++++++ arch/arm/plat-omap/include/plat/l3_2xxx.h | 20 ++ arch/arm/plat-omap/include/plat/l4_2xxx.h | 24 +++ 3 files changed, 354 insertions(+) create mode 100644 arch/arm/plat-omap/include/plat/l3_2xxx.h create mode 100644 arch/arm/plat-omap/include/plat/l4_2xxx.h (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index 7fffd340c76..f323c6bb22d 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -19,6 +19,8 @@ #include #include #include +#include +#include #include "omap_hwmod_common_data.h" @@ -39,6 +41,10 @@ static struct omap_hwmod omap2420_mpu_hwmod; static struct omap_hwmod omap2420_iva_hwmod; static struct omap_hwmod omap2420_l3_main_hwmod; static struct omap_hwmod omap2420_l4_core_hwmod; +static struct omap_hwmod omap2420_dss_core_hwmod; +static struct omap_hwmod omap2420_dss_dispc_hwmod; +static struct omap_hwmod omap2420_dss_rfbi_hwmod; +static struct omap_hwmod omap2420_dss_venc_hwmod; static struct omap_hwmod omap2420_wd_timer2_hwmod; static struct omap_hwmod omap2420_gpio1_hwmod; static struct omap_hwmod omap2420_gpio2_hwmod; @@ -67,6 +73,19 @@ static struct omap_hwmod_ocp_if *omap2420_l3_main_slaves[] = { &omap2420_mpu__l3_main, }; +/* DSS -> l3 */ +static struct omap_hwmod_ocp_if omap2420_dss__l3 = { + .master = &omap2420_dss_core_hwmod, + .slave = &omap2420_l3_main_hwmod, + .fw = { + .omap2 = { + .l3_perm_bit = OMAP2_L3_CORE_FW_CONNID_DSS, + .flags = OMAP_FIREWALL_L3, + } + }, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* Master interfaces on the L3 interconnect */ static struct omap_hwmod_ocp_if *omap2420_l3_main_masters[] = { &omap2420_l3_main__l4_core, @@ -509,6 +528,291 @@ static struct omap_hwmod omap2420_uart3_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), }; +/* + * 'dss' class + * display sub-system + */ + +static struct omap_hwmod_class_sysconfig omap2420_dss_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2420_dss_hwmod_class = { + .name = "dss", + .sysc = &omap2420_dss_sysc, +}; + +/* dss */ +static struct omap_hwmod_irq_info omap2420_dss_irqs[] = { + { .irq = 25 }, +}; + +static struct omap_hwmod_dma_info omap2420_dss_sdma_chs[] = { + { .name = "dispc", .dma_req = 5 }, +}; + +/* dss */ +/* dss master ports */ +static struct omap_hwmod_ocp_if *omap2420_dss_masters[] = { + &omap2420_dss__l3, +}; + +static struct omap_hwmod_addr_space omap2420_dss_addrs[] = { + { + .pa_start = 0x48050000, + .pa_end = 0x480503FF, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> dss */ +static struct omap_hwmod_ocp_if omap2420_l4_core__dss = { + .master = &omap2420_l4_core_hwmod, + .slave = &omap2420_dss_core_hwmod, + .clk = "dss_ick", + .addr = omap2420_dss_addrs, + .addr_cnt = ARRAY_SIZE(omap2420_dss_addrs), + .fw = { + .omap2 = { + .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_CORE_REGION, + .flags = OMAP_FIREWALL_L4, + } + }, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* dss slave ports */ +static struct omap_hwmod_ocp_if *omap2420_dss_slaves[] = { + &omap2420_l4_core__dss, +}; + +static struct omap_hwmod_opt_clk dss_opt_clks[] = { + { .role = "tv_clk", .clk = "dss_54m_fck" }, + { .role = "sys_clk", .clk = "dss2_fck" }, +}; + +static struct omap_hwmod omap2420_dss_core_hwmod = { + .name = "dss_core", + .class = &omap2420_dss_hwmod_class, + .main_clk = "dss1_fck", /* instead of dss_fck */ + .mpu_irqs = omap2420_dss_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2420_dss_irqs), + .sdma_reqs = omap2420_dss_sdma_chs, + .sdma_reqs_cnt = ARRAY_SIZE(omap2420_dss_sdma_chs), + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_DSS1_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_stdby_bit = OMAP24XX_ST_DSS_SHIFT, + }, + }, + .opt_clks = dss_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks), + .slaves = omap2420_dss_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_dss_slaves), + .masters = omap2420_dss_masters, + .masters_cnt = ARRAY_SIZE(omap2420_dss_masters), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), + .flags = HWMOD_NO_IDLEST, +}; + +/* + * 'dispc' class + * display controller + */ + +static struct omap_hwmod_class_sysconfig omap2420_dispc_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2420_dispc_hwmod_class = { + .name = "dispc", + .sysc = &omap2420_dispc_sysc, +}; + +static struct omap_hwmod_addr_space omap2420_dss_dispc_addrs[] = { + { + .pa_start = 0x48050400, + .pa_end = 0x480507FF, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> dss_dispc */ +static struct omap_hwmod_ocp_if omap2420_l4_core__dss_dispc = { + .master = &omap2420_l4_core_hwmod, + .slave = &omap2420_dss_dispc_hwmod, + .clk = "dss_ick", + .addr = omap2420_dss_dispc_addrs, + .addr_cnt = ARRAY_SIZE(omap2420_dss_dispc_addrs), + .fw = { + .omap2 = { + .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_DISPC_REGION, + .flags = OMAP_FIREWALL_L4, + } + }, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* dss_dispc slave ports */ +static struct omap_hwmod_ocp_if *omap2420_dss_dispc_slaves[] = { + &omap2420_l4_core__dss_dispc, +}; + +static struct omap_hwmod omap2420_dss_dispc_hwmod = { + .name = "dss_dispc", + .class = &omap2420_dispc_hwmod_class, + .main_clk = "dss1_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_DSS1_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_stdby_bit = OMAP24XX_ST_DSS_SHIFT, + }, + }, + .slaves = omap2420_dss_dispc_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_dss_dispc_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), + .flags = HWMOD_NO_IDLEST, +}; + +/* + * 'rfbi' class + * remote frame buffer interface + */ + +static struct omap_hwmod_class_sysconfig omap2420_rfbi_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2420_rfbi_hwmod_class = { + .name = "rfbi", + .sysc = &omap2420_rfbi_sysc, +}; + +static struct omap_hwmod_addr_space omap2420_dss_rfbi_addrs[] = { + { + .pa_start = 0x48050800, + .pa_end = 0x48050BFF, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> dss_rfbi */ +static struct omap_hwmod_ocp_if omap2420_l4_core__dss_rfbi = { + .master = &omap2420_l4_core_hwmod, + .slave = &omap2420_dss_rfbi_hwmod, + .clk = "dss_ick", + .addr = omap2420_dss_rfbi_addrs, + .addr_cnt = ARRAY_SIZE(omap2420_dss_rfbi_addrs), + .fw = { + .omap2 = { + .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_CORE_REGION, + .flags = OMAP_FIREWALL_L4, + } + }, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* dss_rfbi slave ports */ +static struct omap_hwmod_ocp_if *omap2420_dss_rfbi_slaves[] = { + &omap2420_l4_core__dss_rfbi, +}; + +static struct omap_hwmod omap2420_dss_rfbi_hwmod = { + .name = "dss_rfbi", + .class = &omap2420_rfbi_hwmod_class, + .main_clk = "dss1_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_DSS1_SHIFT, + .module_offs = CORE_MOD, + }, + }, + .slaves = omap2420_dss_rfbi_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_dss_rfbi_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), + .flags = HWMOD_NO_IDLEST, +}; + +/* + * 'venc' class + * video encoder + */ + +static struct omap_hwmod_class omap2420_venc_hwmod_class = { + .name = "venc", +}; + +/* dss_venc */ +static struct omap_hwmod_addr_space omap2420_dss_venc_addrs[] = { + { + .pa_start = 0x48050C00, + .pa_end = 0x48050FFF, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> dss_venc */ +static struct omap_hwmod_ocp_if omap2420_l4_core__dss_venc = { + .master = &omap2420_l4_core_hwmod, + .slave = &omap2420_dss_venc_hwmod, + .clk = "dss_54m_fck", + .addr = omap2420_dss_venc_addrs, + .addr_cnt = ARRAY_SIZE(omap2420_dss_venc_addrs), + .fw = { + .omap2 = { + .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_VENC_REGION, + .flags = OMAP_FIREWALL_L4, + } + }, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* dss_venc slave ports */ +static struct omap_hwmod_ocp_if *omap2420_dss_venc_slaves[] = { + &omap2420_l4_core__dss_venc, +}; + +static struct omap_hwmod omap2420_dss_venc_hwmod = { + .name = "dss_venc", + .class = &omap2420_venc_hwmod_class, + .main_clk = "dss1_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_DSS1_SHIFT, + .module_offs = CORE_MOD, + }, + }, + .slaves = omap2420_dss_venc_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_dss_venc_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), + .flags = HWMOD_NO_IDLEST, +}; + /* I2C common */ static struct omap_hwmod_class_sysconfig i2c_sysc = { .rev_offs = 0x00, @@ -1026,6 +1330,12 @@ static __initdata struct omap_hwmod *omap2420_hwmods[] = { &omap2420_uart1_hwmod, &omap2420_uart2_hwmod, &omap2420_uart3_hwmod, + /* dss class */ + &omap2420_dss_core_hwmod, + &omap2420_dss_dispc_hwmod, + &omap2420_dss_rfbi_hwmod, + &omap2420_dss_venc_hwmod, + /* i2c class */ &omap2420_i2c1_hwmod, &omap2420_i2c2_hwmod, diff --git a/arch/arm/plat-omap/include/plat/l3_2xxx.h b/arch/arm/plat-omap/include/plat/l3_2xxx.h new file mode 100644 index 00000000000..b8b5641379b --- /dev/null +++ b/arch/arm/plat-omap/include/plat/l3_2xxx.h @@ -0,0 +1,20 @@ +/* + * arch/arm/plat-omap/include/plat/l3_2xxx.h - L3 firewall definitions + * + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * Sumit Semwal + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ +#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_2XXX_H +#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_2XXX_H + +/* L3 CONNIDs */ +/* Display Sub system (DSS) */ +#define OMAP2_L3_CORE_FW_CONNID_DSS 8 + +#endif diff --git a/arch/arm/plat-omap/include/plat/l4_2xxx.h b/arch/arm/plat-omap/include/plat/l4_2xxx.h new file mode 100644 index 00000000000..3f39cf8a35c --- /dev/null +++ b/arch/arm/plat-omap/include/plat/l4_2xxx.h @@ -0,0 +1,24 @@ +/* + * arch/arm/plat-omap/include/plat/l4_2xxx.h - L4 firewall definitions + * + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * Sumit Semwal + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ +#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L4_2XXX_H +#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L4_2XXX_H + +/* L4 CORE */ +/* Display Sub system (DSS) */ +#define OMAP2420_L4_CORE_FW_DSS_CORE_REGION 28 +#define OMAP2420_L4_CORE_FW_DSS_DISPC_REGION 29 +#define OMAP2420_L4_CORE_FW_DSS_RFBI_REGION 30 +#define OMAP2420_L4_CORE_FW_DSS_VENC_REGION 31 +#define OMAP2420_L4_CORE_FW_DSS_TA_REGION 32 + +#endif -- cgit v1.2.3-18-g5258 From de56dbb6c1f8de1f54b09111eb50d8f9b8b073b2 Mon Sep 17 00:00:00 2001 From: Senthilvadivu Guruswamy Date: Tue, 22 Feb 2011 09:51:15 +0200 Subject: OMAP2430: hwmod data: add DSS DISPC RFBI VENC Hwmod needs database of all IPs in a system. This patch generates the hwmod database for OMAP2430 Display Sub System. Since DSS is also considered as an IP as DISPC, RFBI, name it as dss_core. Acked-by: Benoit Cousson Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman Signed-off-by: Sumit Semwal Signed-off-by: Senthilvadivu Guruswamy Signed-off-by: Tomi Valkeinen --- arch/arm/mach-omap2/omap_hwmod_2430_data.c | 284 +++++++++++++++++++++++++++++ 1 file changed, 284 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 7ba688a1c84..de0015d3843 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -19,6 +19,7 @@ #include #include #include +#include #include "omap_hwmod_common_data.h" @@ -39,6 +40,10 @@ static struct omap_hwmod omap2430_mpu_hwmod; static struct omap_hwmod omap2430_iva_hwmod; static struct omap_hwmod omap2430_l3_main_hwmod; static struct omap_hwmod omap2430_l4_core_hwmod; +static struct omap_hwmod omap2430_dss_core_hwmod; +static struct omap_hwmod omap2430_dss_dispc_hwmod; +static struct omap_hwmod omap2430_dss_rfbi_hwmod; +static struct omap_hwmod omap2430_dss_venc_hwmod; static struct omap_hwmod omap2430_wd_timer2_hwmod; static struct omap_hwmod omap2430_gpio1_hwmod; static struct omap_hwmod omap2430_gpio2_hwmod; @@ -69,6 +74,19 @@ static struct omap_hwmod_ocp_if *omap2430_l3_main_slaves[] = { &omap2430_mpu__l3_main, }; +/* DSS -> l3 */ +static struct omap_hwmod_ocp_if omap2430_dss__l3 = { + .master = &omap2430_dss_core_hwmod, + .slave = &omap2430_l3_main_hwmod, + .fw = { + .omap2 = { + .l3_perm_bit = OMAP2_L3_CORE_FW_CONNID_DSS, + .flags = OMAP_FIREWALL_L3, + } + }, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* Master interfaces on the L3 interconnect */ static struct omap_hwmod_ocp_if *omap2430_l3_main_masters[] = { &omap2430_l3_main__l4_core, @@ -566,6 +584,266 @@ static struct omap_hwmod omap2430_uart3_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; +/* + * 'dss' class + * display sub-system + */ + +static struct omap_hwmod_class_sysconfig omap2430_dss_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2430_dss_hwmod_class = { + .name = "dss", + .sysc = &omap2430_dss_sysc, +}; + +/* dss */ +static struct omap_hwmod_irq_info omap2430_dss_irqs[] = { + { .irq = 25 }, +}; +static struct omap_hwmod_dma_info omap2430_dss_sdma_chs[] = { + { .name = "dispc", .dma_req = 5 }, +}; + +/* dss */ +/* dss master ports */ +static struct omap_hwmod_ocp_if *omap2430_dss_masters[] = { + &omap2430_dss__l3, +}; + +static struct omap_hwmod_addr_space omap2430_dss_addrs[] = { + { + .pa_start = 0x48050000, + .pa_end = 0x480503FF, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> dss */ +static struct omap_hwmod_ocp_if omap2430_l4_core__dss = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_dss_core_hwmod, + .clk = "dss_ick", + .addr = omap2430_dss_addrs, + .addr_cnt = ARRAY_SIZE(omap2430_dss_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* dss slave ports */ +static struct omap_hwmod_ocp_if *omap2430_dss_slaves[] = { + &omap2430_l4_core__dss, +}; + +static struct omap_hwmod_opt_clk dss_opt_clks[] = { + { .role = "tv_clk", .clk = "dss_54m_fck" }, + { .role = "sys_clk", .clk = "dss2_fck" }, +}; + +static struct omap_hwmod omap2430_dss_core_hwmod = { + .name = "dss_core", + .class = &omap2430_dss_hwmod_class, + .main_clk = "dss1_fck", /* instead of dss_fck */ + .mpu_irqs = omap2430_dss_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2430_dss_irqs), + .sdma_reqs = omap2430_dss_sdma_chs, + .sdma_reqs_cnt = ARRAY_SIZE(omap2430_dss_sdma_chs), + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_DSS1_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_stdby_bit = OMAP24XX_ST_DSS_SHIFT, + }, + }, + .opt_clks = dss_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks), + .slaves = omap2430_dss_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_dss_slaves), + .masters = omap2430_dss_masters, + .masters_cnt = ARRAY_SIZE(omap2430_dss_masters), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), + .flags = HWMOD_NO_IDLEST, +}; + +/* + * 'dispc' class + * display controller + */ + +static struct omap_hwmod_class_sysconfig omap2430_dispc_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2430_dispc_hwmod_class = { + .name = "dispc", + .sysc = &omap2430_dispc_sysc, +}; + +static struct omap_hwmod_addr_space omap2430_dss_dispc_addrs[] = { + { + .pa_start = 0x48050400, + .pa_end = 0x480507FF, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> dss_dispc */ +static struct omap_hwmod_ocp_if omap2430_l4_core__dss_dispc = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_dss_dispc_hwmod, + .clk = "dss_ick", + .addr = omap2430_dss_dispc_addrs, + .addr_cnt = ARRAY_SIZE(omap2430_dss_dispc_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* dss_dispc slave ports */ +static struct omap_hwmod_ocp_if *omap2430_dss_dispc_slaves[] = { + &omap2430_l4_core__dss_dispc, +}; + +static struct omap_hwmod omap2430_dss_dispc_hwmod = { + .name = "dss_dispc", + .class = &omap2430_dispc_hwmod_class, + .main_clk = "dss1_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_DSS1_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_stdby_bit = OMAP24XX_ST_DSS_SHIFT, + }, + }, + .slaves = omap2430_dss_dispc_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_dss_dispc_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), + .flags = HWMOD_NO_IDLEST, +}; + +/* + * 'rfbi' class + * remote frame buffer interface + */ + +static struct omap_hwmod_class_sysconfig omap2430_rfbi_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2430_rfbi_hwmod_class = { + .name = "rfbi", + .sysc = &omap2430_rfbi_sysc, +}; + +static struct omap_hwmod_addr_space omap2430_dss_rfbi_addrs[] = { + { + .pa_start = 0x48050800, + .pa_end = 0x48050BFF, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> dss_rfbi */ +static struct omap_hwmod_ocp_if omap2430_l4_core__dss_rfbi = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_dss_rfbi_hwmod, + .clk = "dss_ick", + .addr = omap2430_dss_rfbi_addrs, + .addr_cnt = ARRAY_SIZE(omap2430_dss_rfbi_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* dss_rfbi slave ports */ +static struct omap_hwmod_ocp_if *omap2430_dss_rfbi_slaves[] = { + &omap2430_l4_core__dss_rfbi, +}; + +static struct omap_hwmod omap2430_dss_rfbi_hwmod = { + .name = "dss_rfbi", + .class = &omap2430_rfbi_hwmod_class, + .main_clk = "dss1_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_DSS1_SHIFT, + .module_offs = CORE_MOD, + }, + }, + .slaves = omap2430_dss_rfbi_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_dss_rfbi_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), + .flags = HWMOD_NO_IDLEST, +}; + +/* + * 'venc' class + * video encoder + */ + +static struct omap_hwmod_class omap2430_venc_hwmod_class = { + .name = "venc", +}; + +/* dss_venc */ +static struct omap_hwmod_addr_space omap2430_dss_venc_addrs[] = { + { + .pa_start = 0x48050C00, + .pa_end = 0x48050FFF, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> dss_venc */ +static struct omap_hwmod_ocp_if omap2430_l4_core__dss_venc = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_dss_venc_hwmod, + .clk = "dss_54m_fck", + .addr = omap2430_dss_venc_addrs, + .addr_cnt = ARRAY_SIZE(omap2430_dss_venc_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* dss_venc slave ports */ +static struct omap_hwmod_ocp_if *omap2430_dss_venc_slaves[] = { + &omap2430_l4_core__dss_venc, +}; + +static struct omap_hwmod omap2430_dss_venc_hwmod = { + .name = "dss_venc", + .class = &omap2430_venc_hwmod_class, + .main_clk = "dss1_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_DSS1_SHIFT, + .module_offs = CORE_MOD, + }, + }, + .slaves = omap2430_dss_venc_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_dss_venc_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), + .flags = HWMOD_NO_IDLEST, +}; + /* I2C common */ static struct omap_hwmod_class_sysconfig i2c_sysc = { .rev_offs = 0x00, @@ -1240,6 +1518,12 @@ static __initdata struct omap_hwmod *omap2430_hwmods[] = { &omap2430_uart1_hwmod, &omap2430_uart2_hwmod, &omap2430_uart3_hwmod, + /* dss class */ + &omap2430_dss_core_hwmod, + &omap2430_dss_dispc_hwmod, + &omap2430_dss_rfbi_hwmod, + &omap2430_dss_venc_hwmod, + /* i2c class */ &omap2430_i2c1_hwmod, &omap2430_i2c2_hwmod, -- cgit v1.2.3-18-g5258 From e04d9e1e4825cb3f6cfc238d7357ef084952eab1 Mon Sep 17 00:00:00 2001 From: Senthilvadivu Guruswamy Date: Mon, 24 Jan 2011 06:21:51 +0000 Subject: OMAP3: hwmod data: add DSS DISPC RFBI DSI VENC Hwmod needs database of all IPs in a system. This patch generates the hwmod database for Display Sub System applicable for OMAP3430 and OMAP36xx. DSS is also considered as an IP as DISPC, RFBI and named as dss_core. For all the IP modules in DSS, same clock is needed for enabling. Hwmod sees DSS IPs as independent IPs, so same clock has to be repeated for .main_clk in each IP. This patch defines separate hwmod databases for OMAP3430ES1 and (OMAP3430ES2 and OMAP36xx) as OMAP3430ES1 does not have IDLEST bit to poll on for dss IP, and also the firewall regions are different between 3430es1 and later. Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman Signed-off-by: Sumit Semwal Signed-off-by: Senthilvadivu Guruswamy Signed-off-by: Tomi Valkeinen --- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 433 +++++++++++++++++++++++++++++ arch/arm/plat-omap/include/plat/l3_3xxx.h | 20 ++ arch/arm/plat-omap/include/plat/l4_3xxx.h | 10 + 3 files changed, 463 insertions(+) create mode 100644 arch/arm/plat-omap/include/plat/l3_3xxx.h (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 879f55f272e..e9d00122856 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -46,6 +47,12 @@ static struct omap_hwmod omap3xxx_l3_main_hwmod; static struct omap_hwmod omap3xxx_l4_core_hwmod; static struct omap_hwmod omap3xxx_l4_per_hwmod; static struct omap_hwmod omap3xxx_wd_timer2_hwmod; +static struct omap_hwmod omap3430es1_dss_core_hwmod; +static struct omap_hwmod omap3xxx_dss_core_hwmod; +static struct omap_hwmod omap3xxx_dss_dispc_hwmod; +static struct omap_hwmod omap3xxx_dss_dsi1_hwmod; +static struct omap_hwmod omap3xxx_dss_rfbi_hwmod; +static struct omap_hwmod omap3xxx_dss_venc_hwmod; static struct omap_hwmod omap3xxx_i2c1_hwmod; static struct omap_hwmod omap3xxx_i2c2_hwmod; static struct omap_hwmod omap3xxx_i2c3_hwmod; @@ -91,6 +98,19 @@ static struct omap_hwmod_ocp_if *omap3xxx_l3_main_slaves[] = { &omap3xxx_mpu__l3_main, }; +/* DSS -> l3 */ +static struct omap_hwmod_ocp_if omap3xxx_dss__l3 = { + .master = &omap3xxx_dss_core_hwmod, + .slave = &omap3xxx_l3_main_hwmod, + .fw = { + .omap2 = { + .l3_perm_bit = OMAP3_L3_CORE_FW_INIT_ID_DSS, + .flags = OMAP_FIREWALL_L3, + } + }, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* Master interfaces on the L3 interconnect */ static struct omap_hwmod_ocp_if *omap3xxx_l3_main_masters[] = { &omap3xxx_l3_main__l4_core, @@ -742,6 +762,410 @@ static struct omap_hwmod_class i2c_class = { .sysc = &i2c_sysc, }; +/* + * 'dss' class + * display sub-system + */ + +static struct omap_hwmod_class_sysconfig omap3xxx_dss_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap3xxx_dss_hwmod_class = { + .name = "dss", + .sysc = &omap3xxx_dss_sysc, +}; + +/* dss */ +static struct omap_hwmod_irq_info omap3xxx_dss_irqs[] = { + { .irq = 25 }, +}; + +static struct omap_hwmod_dma_info omap3xxx_dss_sdma_chs[] = { + { .name = "dispc", .dma_req = 5 }, + { .name = "dsi1", .dma_req = 74 }, +}; + +/* dss */ +/* dss master ports */ +static struct omap_hwmod_ocp_if *omap3xxx_dss_masters[] = { + &omap3xxx_dss__l3, +}; + +static struct omap_hwmod_addr_space omap3xxx_dss_addrs[] = { + { + .pa_start = 0x48050000, + .pa_end = 0x480503FF, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> dss */ +static struct omap_hwmod_ocp_if omap3430es1_l4_core__dss = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3430es1_dss_core_hwmod, + .clk = "dss_ick", + .addr = omap3xxx_dss_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_dss_addrs), + .fw = { + .omap2 = { + .l4_fw_region = OMAP3ES1_L4_CORE_FW_DSS_CORE_REGION, + .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP, + .flags = OMAP_FIREWALL_L4, + } + }, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_dss_core_hwmod, + .clk = "dss_ick", + .addr = omap3xxx_dss_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_dss_addrs), + .fw = { + .omap2 = { + .l4_fw_region = OMAP3_L4_CORE_FW_DSS_CORE_REGION, + .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP, + .flags = OMAP_FIREWALL_L4, + } + }, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* dss slave ports */ +static struct omap_hwmod_ocp_if *omap3430es1_dss_slaves[] = { + &omap3430es1_l4_core__dss, +}; + +static struct omap_hwmod_ocp_if *omap3xxx_dss_slaves[] = { + &omap3xxx_l4_core__dss, +}; + +static struct omap_hwmod_opt_clk dss_opt_clks[] = { + { .role = "tv_clk", .clk = "dss_tv_fck" }, + { .role = "dssclk", .clk = "dss_96m_fck" }, + { .role = "sys_clk", .clk = "dss2_alwon_fck" }, +}; + +static struct omap_hwmod omap3430es1_dss_core_hwmod = { + .name = "dss_core", + .class = &omap3xxx_dss_hwmod_class, + .main_clk = "dss1_alwon_fck", /* instead of dss_fck */ + .mpu_irqs = omap3xxx_dss_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_dss_irqs), + .sdma_reqs = omap3xxx_dss_sdma_chs, + .sdma_reqs_cnt = ARRAY_SIZE(omap3xxx_dss_sdma_chs), + + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_DSS1_SHIFT, + .module_offs = OMAP3430_DSS_MOD, + .idlest_reg_id = 1, + .idlest_stdby_bit = OMAP3430ES1_ST_DSS_SHIFT, + }, + }, + .opt_clks = dss_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks), + .slaves = omap3430es1_dss_slaves, + .slaves_cnt = ARRAY_SIZE(omap3430es1_dss_slaves), + .masters = omap3xxx_dss_masters, + .masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1), + .flags = HWMOD_NO_IDLEST, +}; + +static struct omap_hwmod omap3xxx_dss_core_hwmod = { + .name = "dss_core", + .class = &omap3xxx_dss_hwmod_class, + .main_clk = "dss1_alwon_fck", /* instead of dss_fck */ + .mpu_irqs = omap3xxx_dss_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_dss_irqs), + .sdma_reqs = omap3xxx_dss_sdma_chs, + .sdma_reqs_cnt = ARRAY_SIZE(omap3xxx_dss_sdma_chs), + + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_DSS1_SHIFT, + .module_offs = OMAP3430_DSS_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT, + .idlest_stdby_bit = OMAP3430ES2_ST_DSS_STDBY_SHIFT, + }, + }, + .opt_clks = dss_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks), + .slaves = omap3xxx_dss_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_slaves), + .masters = omap3xxx_dss_masters, + .masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters), + .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2 | + CHIP_IS_OMAP3630ES1 | CHIP_GE_OMAP3630ES1_1), +}; + +/* + * 'dispc' class + * display controller + */ + +static struct omap_hwmod_class_sysconfig omap3xxx_dispc_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_CLOCKACTIVITY | + SYSC_HAS_MIDLEMODE | SYSC_HAS_ENAWAKEUP | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap3xxx_dispc_hwmod_class = { + .name = "dispc", + .sysc = &omap3xxx_dispc_sysc, +}; + +static struct omap_hwmod_addr_space omap3xxx_dss_dispc_addrs[] = { + { + .pa_start = 0x48050400, + .pa_end = 0x480507FF, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> dss_dispc */ +static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dispc = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_dss_dispc_hwmod, + .clk = "dss_ick", + .addr = omap3xxx_dss_dispc_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_dss_dispc_addrs), + .fw = { + .omap2 = { + .l4_fw_region = OMAP3_L4_CORE_FW_DSS_DISPC_REGION, + .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP, + .flags = OMAP_FIREWALL_L4, + } + }, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* dss_dispc slave ports */ +static struct omap_hwmod_ocp_if *omap3xxx_dss_dispc_slaves[] = { + &omap3xxx_l4_core__dss_dispc, +}; + +static struct omap_hwmod omap3xxx_dss_dispc_hwmod = { + .name = "dss_dispc", + .class = &omap3xxx_dispc_hwmod_class, + .main_clk = "dss1_alwon_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_DSS1_SHIFT, + .module_offs = OMAP3430_DSS_MOD, + }, + }, + .slaves = omap3xxx_dss_dispc_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_dispc_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 | + CHIP_GE_OMAP3430ES2 | CHIP_IS_OMAP3630ES1 | + CHIP_GE_OMAP3630ES1_1), + .flags = HWMOD_NO_IDLEST, +}; + +/* + * 'dsi' class + * display serial interface controller + */ + +static struct omap_hwmod_class omap3xxx_dsi_hwmod_class = { + .name = "dsi", +}; + +/* dss_dsi1 */ +static struct omap_hwmod_addr_space omap3xxx_dss_dsi1_addrs[] = { + { + .pa_start = 0x4804FC00, + .pa_end = 0x4804FFFF, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> dss_dsi1 */ +static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dsi1 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_dss_dsi1_hwmod, + .addr = omap3xxx_dss_dsi1_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_dss_dsi1_addrs), + .fw = { + .omap2 = { + .l4_fw_region = OMAP3_L4_CORE_FW_DSS_DSI_REGION, + .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP, + .flags = OMAP_FIREWALL_L4, + } + }, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* dss_dsi1 slave ports */ +static struct omap_hwmod_ocp_if *omap3xxx_dss_dsi1_slaves[] = { + &omap3xxx_l4_core__dss_dsi1, +}; + +static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = { + .name = "dss_dsi1", + .class = &omap3xxx_dsi_hwmod_class, + .main_clk = "dss1_alwon_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_DSS1_SHIFT, + .module_offs = OMAP3430_DSS_MOD, + }, + }, + .slaves = omap3xxx_dss_dsi1_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_dsi1_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 | + CHIP_GE_OMAP3430ES2 | CHIP_IS_OMAP3630ES1 | + CHIP_GE_OMAP3630ES1_1), + .flags = HWMOD_NO_IDLEST, +}; + +/* + * 'rfbi' class + * remote frame buffer interface + */ + +static struct omap_hwmod_class_sysconfig omap3xxx_rfbi_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap3xxx_rfbi_hwmod_class = { + .name = "rfbi", + .sysc = &omap3xxx_rfbi_sysc, +}; + +static struct omap_hwmod_addr_space omap3xxx_dss_rfbi_addrs[] = { + { + .pa_start = 0x48050800, + .pa_end = 0x48050BFF, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> dss_rfbi */ +static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_rfbi = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_dss_rfbi_hwmod, + .clk = "dss_ick", + .addr = omap3xxx_dss_rfbi_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_dss_rfbi_addrs), + .fw = { + .omap2 = { + .l4_fw_region = OMAP3_L4_CORE_FW_DSS_RFBI_REGION, + .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP , + .flags = OMAP_FIREWALL_L4, + } + }, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* dss_rfbi slave ports */ +static struct omap_hwmod_ocp_if *omap3xxx_dss_rfbi_slaves[] = { + &omap3xxx_l4_core__dss_rfbi, +}; + +static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = { + .name = "dss_rfbi", + .class = &omap3xxx_rfbi_hwmod_class, + .main_clk = "dss1_alwon_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_DSS1_SHIFT, + .module_offs = OMAP3430_DSS_MOD, + }, + }, + .slaves = omap3xxx_dss_rfbi_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_rfbi_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 | + CHIP_GE_OMAP3430ES2 | CHIP_IS_OMAP3630ES1 | + CHIP_GE_OMAP3630ES1_1), + .flags = HWMOD_NO_IDLEST, +}; + +/* + * 'venc' class + * video encoder + */ + +static struct omap_hwmod_class omap3xxx_venc_hwmod_class = { + .name = "venc", +}; + +/* dss_venc */ +static struct omap_hwmod_addr_space omap3xxx_dss_venc_addrs[] = { + { + .pa_start = 0x48050C00, + .pa_end = 0x48050FFF, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> dss_venc */ +static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_dss_venc_hwmod, + .clk = "dss_tv_fck", + .addr = omap3xxx_dss_venc_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_dss_venc_addrs), + .fw = { + .omap2 = { + .l4_fw_region = OMAP3_L4_CORE_FW_DSS_VENC_REGION, + .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP, + .flags = OMAP_FIREWALL_L4, + } + }, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* dss_venc slave ports */ +static struct omap_hwmod_ocp_if *omap3xxx_dss_venc_slaves[] = { + &omap3xxx_l4_core__dss_venc, +}; + +static struct omap_hwmod omap3xxx_dss_venc_hwmod = { + .name = "dss_venc", + .class = &omap3xxx_venc_hwmod_class, + .main_clk = "dss1_alwon_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_DSS1_SHIFT, + .module_offs = OMAP3430_DSS_MOD, + }, + }, + .slaves = omap3xxx_dss_venc_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_venc_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 | + CHIP_GE_OMAP3430ES2 | CHIP_IS_OMAP3630ES1 | + CHIP_GE_OMAP3630ES1_1), + .flags = HWMOD_NO_IDLEST, +}; + /* I2C1 */ static struct omap_i2c_dev_attr i2c1_dev_attr = { @@ -1800,6 +2224,15 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { &omap3xxx_uart2_hwmod, &omap3xxx_uart3_hwmod, &omap3xxx_uart4_hwmod, + /* dss class */ + &omap3430es1_dss_core_hwmod, + &omap3xxx_dss_core_hwmod, + &omap3xxx_dss_dispc_hwmod, + &omap3xxx_dss_dsi1_hwmod, + &omap3xxx_dss_rfbi_hwmod, + &omap3xxx_dss_venc_hwmod, + + /* i2c class */ &omap3xxx_i2c1_hwmod, &omap3xxx_i2c2_hwmod, &omap3xxx_i2c3_hwmod, diff --git a/arch/arm/plat-omap/include/plat/l3_3xxx.h b/arch/arm/plat-omap/include/plat/l3_3xxx.h new file mode 100644 index 00000000000..cde1938c5f8 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/l3_3xxx.h @@ -0,0 +1,20 @@ +/* + * arch/arm/plat-omap/include/plat/l3_3xxx.h - L3 firewall definitions + * + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * Sumit Semwal + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ +#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_3XXX_H +#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_3XXX_H + +/* L3 Initiator IDs */ +/* Display Sub system (DSS) */ +#define OMAP3_L3_CORE_FW_INIT_ID_DSS 29 + +#endif diff --git a/arch/arm/plat-omap/include/plat/l4_3xxx.h b/arch/arm/plat-omap/include/plat/l4_3xxx.h index 5e194937542..881a858b1ff 100644 --- a/arch/arm/plat-omap/include/plat/l4_3xxx.h +++ b/arch/arm/plat-omap/include/plat/l4_3xxx.h @@ -21,4 +21,14 @@ #define OMAP3_L4_CORE_FW_I2C3_REGION 73 #define OMAP3_L4_CORE_FW_I2C3_TA_REGION 74 +/* Display Sub system (DSS) */ +#define OMAP3_L4_CORE_FW_DSS_PROT_GROUP 2 + +#define OMAP3_L4_CORE_FW_DSS_DSI_REGION 104 +#define OMAP3ES1_L4_CORE_FW_DSS_CORE_REGION 3 +#define OMAP3_L4_CORE_FW_DSS_CORE_REGION 4 +#define OMAP3_L4_CORE_FW_DSS_DISPC_REGION 4 +#define OMAP3_L4_CORE_FW_DSS_RFBI_REGION 5 +#define OMAP3_L4_CORE_FW_DSS_VENC_REGION 6 +#define OMAP3_L4_CORE_FW_DSS_TA_REGION 7 #endif -- cgit v1.2.3-18-g5258 From 1dde9732d543f30d4297e8b74329c5ce797b5d16 Mon Sep 17 00:00:00 2001 From: Senthilvadivu Guruswamy Date: Mon, 24 Jan 2011 06:21:53 +0000 Subject: OMAP2, 3: DSS2: Use Regulator init with driver name Use driver name in regulator inits needed for display instead of using device structure name. Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman Signed-off-by: Senthilvadivu Guruswamy Signed-off-by: Sumit Semwal Signed-off-by: Tomi Valkeinen --- arch/arm/mach-omap2/board-3430sdp.c | 11 +++-------- arch/arm/mach-omap2/board-cm-t35.c | 12 ++++-------- arch/arm/mach-omap2/board-igep0020.c | 6 ++---- arch/arm/mach-omap2/board-omap3evm.c | 6 ++---- arch/arm/mach-omap2/board-omap3stalker.c | 12 ++++-------- 5 files changed, 15 insertions(+), 32 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 31085883199..0f680cc4d9f 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -315,10 +315,8 @@ static struct platform_device sdp3430_dss_device = { }, }; -static struct regulator_consumer_supply sdp3430_vdda_dac_supply = { - .supply = "vdda_dac", - .dev = &sdp3430_dss_device.dev, -}; +static struct regulator_consumer_supply sdp3430_vdda_dac_supply = + REGULATOR_SUPPLY("vdda_dac", "omapdss"); static struct platform_device *sdp3430_devices[] __initdata = { &sdp3430_dss_device, @@ -545,10 +543,7 @@ static struct regulator_init_data sdp3430_vdac = { /* VPLL2 for digital video outputs */ static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = { - { - .supply = "vdds_dsi", - .dev = &sdp3430_dss_device.dev, - } + REGULATOR_SUPPLY("vdds_dsi", "omapdss"), }; static struct regulator_init_data sdp3430_vpll2 = { diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 9e4de92a579..d650b7f8078 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -495,15 +495,11 @@ static struct regulator_consumer_supply cm_t35_vsim_supply = { .supply = "vmmc_aux", }; -static struct regulator_consumer_supply cm_t35_vdac_supply = { - .supply = "vdda_dac", - .dev = &cm_t35_dss_device.dev, -}; +static struct regulator_consumer_supply cm_t35_vdac_supply = + REGULATOR_SUPPLY("vdda_dac", "omapdss"); -static struct regulator_consumer_supply cm_t35_vdvi_supply = { - .supply = "vdvi", - .dev = &cm_t35_dss_device.dev, -}; +static struct regulator_consumer_supply cm_t35_vdvi_supply = + REGULATOR_SUPPLY("vdvi", "omapdss"); /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ static struct regulator_init_data cm_t35_vmmc1 = { diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index dd0b1ac3b66..c235fa2a77a 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -493,10 +493,8 @@ static struct platform_device igep2_dss_device = { }, }; -static struct regulator_consumer_supply igep2_vpll2_supply = { - .supply = "vdds_dsi", - .dev = &igep2_dss_device.dev, -}; +static struct regulator_consumer_supply igep2_vpll2_supply = + REGULATOR_SUPPLY("vdds_dsi", "omapdss"); static struct regulator_init_data igep2_vpll2 = { .constraints = { diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index c2a0fca4aa5..5e38da97dec 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -500,10 +500,8 @@ static struct twl4030_codec_data omap3evm_codec_data = { .audio = &omap3evm_audio_data, }; -static struct regulator_consumer_supply omap3_evm_vdda_dac_supply = { - .supply = "vdda_dac", - .dev = &omap3_evm_dss_device.dev, -}; +static struct regulator_consumer_supply omap3_evm_vdda_dac_supply = + REGULATOR_SUPPLY("vdda_dac", "omapdss"); /* VDAC for DSS driving S-Video */ static struct regulator_init_data omap3_evm_vdac = { diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 5d1ccef6916..9c63c37b500 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -448,10 +448,8 @@ static struct twl4030_codec_data omap3stalker_codec_data = { .audio = &omap3stalker_audio_data, }; -static struct regulator_consumer_supply omap3_stalker_vdda_dac_supply = { - .supply = "vdda_dac", - .dev = &omap3_stalker_dss_device.dev, -}; +static struct regulator_consumer_supply omap3_stalker_vdda_dac_supply = + REGULATOR_SUPPLY("vdda_dac", "omapdss"); /* VDAC for DSS driving S-Video */ static struct regulator_init_data omap3_stalker_vdac = { @@ -469,10 +467,8 @@ static struct regulator_init_data omap3_stalker_vdac = { }; /* VPLL2 for digital video outputs */ -static struct regulator_consumer_supply omap3_stalker_vpll2_supply = { - .supply = "vdds_dsi", - .dev = &omap3_stalker_lcd_device.dev, -}; +static struct regulator_consumer_supply omap3_stalker_vpll2_supply = + REGULATOR_SUPPLY("vdds_dsi", "omapdss"); static struct regulator_init_data omap3_stalker_vpll2 = { .constraints = { -- cgit v1.2.3-18-g5258 From b7ee79abcc1bd549eadf5a9852657058e6ecca47 Mon Sep 17 00:00:00 2001 From: Sumit Semwal Date: Mon, 24 Jan 2011 06:21:54 +0000 Subject: OMAP2, 3: DSS2: Create new file display.c for central dss driver registration. A new file display.c is introduced for display driver init, which adds a function omap_display_init to do the DSS driver registration. This is the first step in moving away registration of DSS from board files into a common place. Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman Signed-off-by: Senthilvadivu Guruswamy Signed-off-by: Sumit Semwal Signed-off-by: Tomi Valkeinen --- arch/arm/mach-omap2/Makefile | 3 +++ arch/arm/mach-omap2/display.c | 45 +++++++++++++++++++++++++++++++ arch/arm/plat-omap/include/plat/display.h | 11 ++++++++ 3 files changed, 59 insertions(+) create mode 100644 arch/arm/mach-omap2/display.c (limited to 'arch') diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index ee72a9787bf..1c3635d7f4c 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -245,3 +245,6 @@ obj-y += $(smc91x-m) $(smc91x-y) smsc911x-$(CONFIG_SMSC911X) := gpmc-smsc911x.o obj-y += $(smsc911x-m) $(smsc911x-y) obj-$(CONFIG_ARCH_OMAP4) += hwspinlock.o + +disp-$(CONFIG_OMAP2_DSS) := display.o +obj-y += $(disp-m) $(disp-y) diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c new file mode 100644 index 00000000000..b18db84b034 --- /dev/null +++ b/arch/arm/mach-omap2/display.c @@ -0,0 +1,45 @@ +/* + * OMAP2plus display device setup / initialization. + * + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * Senthilvadivu Guruswamy + * Sumit Semwal + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include + +#include + +static struct platform_device omap_display_device = { + .name = "omapdss", + .id = -1, + .dev = { + .platform_data = NULL, + }, +}; + +int __init omap_display_init(struct omap_dss_board_info *board_data) +{ + int r = 0; + omap_display_device.dev.platform_data = board_data; + + r = platform_device_register(&omap_display_device); + if (r < 0) + printk(KERN_ERR "Unable to register OMAP-Display device\n"); + + return r; +} diff --git a/arch/arm/plat-omap/include/plat/display.h b/arch/arm/plat-omap/include/plat/display.h index 537f4e449f5..0f140ecedb0 100644 --- a/arch/arm/plat-omap/include/plat/display.h +++ b/arch/arm/plat-omap/include/plat/display.h @@ -23,6 +23,7 @@ #include #include #include +#include #include #define DISPC_IRQ_FRAMEDONE (1 << 0) @@ -226,6 +227,16 @@ struct omap_dss_board_info { struct omap_dss_device *default_device; }; +#if defined(CONFIG_OMAP2_DSS_MODULE) || defined(CONFIG_OMAP2_DSS) +/* Init with the board info */ +extern int omap_display_init(struct omap_dss_board_info *board_data); +#else +static inline int omap_display_init(struct omap_dss_board_info *board_data) +{ + return 0; +} +#endif + struct omap_video_timings { /* Unit: pixels */ u16 x_res; -- cgit v1.2.3-18-g5258 From d5e13227c32f12de3afb2e26a86bc9f3e5aaf7b6 Mon Sep 17 00:00:00 2001 From: Senthilvadivu Guruswamy Date: Tue, 22 Feb 2011 11:24:50 +0200 Subject: OMAP2, 3: DSS2: board files: replace platform_device_register with omap_display_init() This patch updated board files to replace platform_device_register or platform_add_devices of DSS with omap_display_init(). This moves away registration of DSS from board files into a common place. Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman Signed-off-by: Sumit Semwal Signed-off-by: Senthilvadivu Guruswamy Signed-off-by: Tomi Valkeinen --- arch/arm/mach-omap2/board-3430sdp.c | 14 +------------- arch/arm/mach-omap2/board-am3517evm.c | 16 +--------------- arch/arm/mach-omap2/board-cm-t35.c | 10 +--------- arch/arm/mach-omap2/board-devkit8000.c | 10 +--------- arch/arm/mach-omap2/board-igep0020.c | 10 +--------- arch/arm/mach-omap2/board-omap3beagle.c | 10 +--------- arch/arm/mach-omap2/board-omap3evm.c | 14 +------------- arch/arm/mach-omap2/board-omap3pandora.c | 10 +--------- arch/arm/mach-omap2/board-omap3stalker.c | 10 +--------- arch/arm/mach-omap2/board-rx51-video.c | 15 +-------------- arch/arm/mach-omap2/board-zoom-display.c | 15 +-------------- 11 files changed, 11 insertions(+), 123 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 0f680cc4d9f..df09e0d6f7d 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -307,21 +307,9 @@ static struct omap_dss_board_info sdp3430_dss_data = { .default_device = &sdp3430_lcd_device, }; -static struct platform_device sdp3430_dss_device = { - .name = "omapdss", - .id = -1, - .dev = { - .platform_data = &sdp3430_dss_data, - }, -}; - static struct regulator_consumer_supply sdp3430_vdda_dac_supply = REGULATOR_SUPPLY("vdda_dac", "omapdss"); -static struct platform_device *sdp3430_devices[] __initdata = { - &sdp3430_dss_device, -}; - static struct omap_board_config_kernel sdp3430_config[] __initdata = { }; @@ -795,7 +783,7 @@ static void __init omap_3430sdp_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3430_i2c_init(); - platform_add_devices(sdp3430_devices, ARRAY_SIZE(sdp3430_devices)); + omap_display_init(&sdp3430_dss_data); if (omap_rev() > OMAP3430_REV_ES1_0) ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV2; else diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 8532d6e0d53..634fe65b33c 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -378,24 +378,12 @@ static struct omap_dss_board_info am3517_evm_dss_data = { .default_device = &am3517_evm_lcd_device, }; -static struct platform_device am3517_evm_dss_device = { - .name = "omapdss", - .id = -1, - .dev = { - .platform_data = &am3517_evm_dss_data, - }, -}; - /* * Board initialization */ static struct omap_board_config_kernel am3517_evm_config[] __initdata = { }; -static struct platform_device *am3517_evm_devices[] __initdata = { - &am3517_evm_dss_device, -}; - static void __init am3517_evm_init_early(void) { omap_board_config = am3517_evm_config; @@ -498,9 +486,7 @@ static void __init am3517_evm_init(void) omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); am3517_evm_i2c_init(); - platform_add_devices(am3517_evm_devices, - ARRAY_SIZE(am3517_evm_devices)); - + omap_display_init(&am3517_evm_dss_data); omap_serial_init(); /* Configure GPIO for EHCI port */ diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index d650b7f8078..7311824be99 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -401,14 +401,6 @@ static struct omap_dss_board_info cm_t35_dss_data = { .default_device = &cm_t35_dvi_device, }; -static struct platform_device cm_t35_dss_device = { - .name = "omapdss", - .id = -1, - .dev = { - .platform_data = &cm_t35_dss_data, - }, -}; - static struct omap2_mcspi_device_config tdo24m_mcspi_config = { .turbo_mode = 0, .single_channel = 1, /* 0: slave, 1: master */ @@ -468,7 +460,7 @@ static void __init cm_t35_init_display(void) msleep(50); gpio_set_value(lcd_en_gpio, 1); - err = platform_device_register(&cm_t35_dss_device); + err = omap_display_init(&cm_t35_dss_data); if (err) { pr_err("CM-T35: failed to register DSS device\n"); goto err_dev_reg; diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index af742887e83..54abdd06436 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -195,14 +195,6 @@ static struct omap_dss_board_info devkit8000_dss_data = { .default_device = &devkit8000_lcd_device, }; -static struct platform_device devkit8000_dss_device = { - .name = "omapdss", - .id = -1, - .dev = { - .platform_data = &devkit8000_dss_data, - }, -}; - static struct regulator_consumer_supply devkit8000_vdda_dac_supply = REGULATOR_SUPPLY("vdda_dac", "omapdss"); @@ -579,7 +571,6 @@ static void __init omap_dm9000_init(void) } static struct platform_device *devkit8000_devices[] __initdata = { - &devkit8000_dss_device, &leds_gpio, &keys_gpio, &omap_dm9000_dev, @@ -801,6 +792,7 @@ static void __init devkit8000_init(void) platform_add_devices(devkit8000_devices, ARRAY_SIZE(devkit8000_devices)); + omap_display_init(&devkit8000_dss_data); spi_register_board_info(devkit8000_spi_board_info, ARRAY_SIZE(devkit8000_spi_board_info)); diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index c235fa2a77a..54e6318f4a8 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -485,14 +485,6 @@ static struct omap_dss_board_info igep2_dss_data = { .default_device = &igep2_dvi_device, }; -static struct platform_device igep2_dss_device = { - .name = "omapdss", - .id = -1, - .dev = { - .platform_data = &igep2_dss_data, - }, -}; - static struct regulator_consumer_supply igep2_vpll2_supply = REGULATOR_SUPPLY("vdds_dsi", "omapdss"); @@ -519,7 +511,6 @@ static void __init igep2_display_init(void) } static struct platform_device *igep2_devices[] __initdata = { - &igep2_dss_device, &igep2_vwlan_device, }; @@ -694,6 +685,7 @@ static void __init igep2_init(void) /* Register I2C busses and drivers */ igep2_i2c_init(); platform_add_devices(igep2_devices, ARRAY_SIZE(igep2_devices)); + omap_display_init(&igep2_dss_data); omap_serial_init(); usb_musb_init(&musb_board_data); usb_ehci_init(&ehci_pdata); diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 19bcd004d60..a1faea3b776 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -228,14 +228,6 @@ static struct omap_dss_board_info beagle_dss_data = { .default_device = &beagle_dvi_device, }; -static struct platform_device beagle_dss_device = { - .name = "omapdss", - .id = -1, - .dev = { - .platform_data = &beagle_dss_data, - }, -}; - static struct regulator_consumer_supply beagle_vdac_supply = REGULATOR_SUPPLY("vdda_dac", "omapdss"); @@ -554,7 +546,6 @@ static void __init omap3_beagle_init_irq(void) static struct platform_device *omap3_beagle_devices[] __initdata = { &leds_gpio, &keys_gpio, - &beagle_dss_device, }; static void __init omap3beagle_flash_init(void) @@ -621,6 +612,7 @@ static void __init omap3_beagle_init(void) omap3_beagle_i2c_init(); platform_add_devices(omap3_beagle_devices, ARRAY_SIZE(omap3_beagle_devices)); + omap_display_init(&beagle_dss_data); omap_serial_init(); omap_mux_init_gpio(170, OMAP_PIN_INPUT); diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 5e38da97dec..8afafddadfb 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -328,14 +328,6 @@ static struct omap_dss_board_info omap3_evm_dss_data = { .default_device = &omap3_evm_lcd_device, }; -static struct platform_device omap3_evm_dss_device = { - .name = "omapdss", - .id = -1, - .dev = { - .platform_data = &omap3_evm_dss_data, - }, -}; - static struct regulator_consumer_supply omap3evm_vmmc1_supply = { .supply = "vmmc", }; @@ -631,10 +623,6 @@ static void __init omap3_evm_init_early(void) omap2_init_common_devices(mt46h32m32lf6_sdrc_params, NULL); } -static struct platform_device *omap3_evm_devices[] __initdata = { - &omap3_evm_dss_device, -}; - static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = { .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, @@ -672,7 +660,7 @@ static void __init omap3_evm_init(void) omap3_evm_i2c_init(); - platform_add_devices(omap3_evm_devices, ARRAY_SIZE(omap3_evm_devices)); + omap_display_init(&omap3_evm_dss_data); spi_register_board_info(omap3evm_spi_board_info, ARRAY_SIZE(omap3evm_spi_board_info)); diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index b91f74ce3a9..17ef5479c7f 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -253,14 +253,6 @@ static struct omap_dss_board_info pandora_dss_data = { .default_device = &pandora_lcd_device, }; -static struct platform_device pandora_dss_device = { - .name = "omapdss", - .id = -1, - .dev = { - .platform_data = &pandora_dss_data, - }, -}; - static void pandora_wl1251_init_card(struct mmc_card *card) { /* @@ -676,7 +668,6 @@ fail: static struct platform_device *omap3pandora_devices[] __initdata = { &pandora_leds_gpio, &pandora_keys_gpio, - &pandora_dss_device, &pandora_vwlan_device, }; @@ -711,6 +702,7 @@ static void __init omap3pandora_init(void) pandora_wl1251_init(); platform_add_devices(omap3pandora_devices, ARRAY_SIZE(omap3pandora_devices)); + omap_display_init(&pandora_dss_data); omap_serial_init(); spi_register_board_info(omap3pandora_spi_board_info, ARRAY_SIZE(omap3pandora_spi_board_info)); diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 9c63c37b500..07006c323fc 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -240,14 +240,6 @@ static struct omap_dss_board_info omap3_stalker_dss_data = { .default_device = &omap3_stalker_dvi_device, }; -static struct platform_device omap3_stalker_dss_device = { - .name = "omapdss", - .id = -1, - .dev = { - .platform_data = &omap3_stalker_dss_data, - }, -}; - static struct regulator_consumer_supply omap3stalker_vmmc1_supply = { .supply = "vmmc", }; @@ -604,7 +596,6 @@ static void __init omap3_stalker_init_irq(void) } static struct platform_device *omap3_stalker_devices[] __initdata = { - &omap3_stalker_dss_device, &keys_gpio, }; @@ -644,6 +635,7 @@ static void __init omap3_stalker_init(void) platform_add_devices(omap3_stalker_devices, ARRAY_SIZE(omap3_stalker_devices)); + omap_display_init(&omap3_stalker_dss_data); spi_register_board_info(omap3stalker_spi_board_info, ARRAY_SIZE(omap3stalker_spi_board_info)); diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c index acd670054d9..89a66db8b77 100644 --- a/arch/arm/mach-omap2/board-rx51-video.c +++ b/arch/arm/mach-omap2/board-rx51-video.c @@ -66,18 +66,6 @@ static struct omap_dss_board_info rx51_dss_board_info = { .default_device = &rx51_lcd_device, }; -struct platform_device rx51_display_device = { - .name = "omapdss", - .id = -1, - .dev = { - .platform_data = &rx51_dss_board_info, - }, -}; - -static struct platform_device *rx51_video_devices[] __initdata = { - &rx51_display_device, -}; - static int __init rx51_video_init(void) { if (!machine_is_nokia_rx51()) @@ -95,8 +83,7 @@ static int __init rx51_video_init(void) gpio_direction_output(RX51_LCD_RESET_GPIO, 1); - platform_add_devices(rx51_video_devices, - ARRAY_SIZE(rx51_video_devices)); + omap_display_init(&rx51_dss_board_info); return 0; } diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c index 6bcd43657ae..37b84c2b850 100644 --- a/arch/arm/mach-omap2/board-zoom-display.c +++ b/arch/arm/mach-omap2/board-zoom-display.c @@ -130,14 +130,6 @@ static struct omap_dss_board_info zoom_dss_data = { .default_device = &zoom_lcd_device, }; -static struct platform_device zoom_dss_device = { - .name = "omapdss", - .id = -1, - .dev = { - .platform_data = &zoom_dss_data, - }, -}; - static struct omap2_mcspi_device_config dss_lcd_mcspi_config = { .turbo_mode = 1, .single_channel = 1, /* 0: slave, 1: master */ @@ -153,14 +145,9 @@ static struct spi_board_info nec_8048_spi_board_info[] __initdata = { }, }; -static struct platform_device *zoom_display_devices[] __initdata = { - &zoom_dss_device, -}; - void __init zoom_display_init(void) { - platform_add_devices(zoom_display_devices, - ARRAY_SIZE(zoom_display_devices)); + omap_display_init(&zoom_dss_data); spi_register_board_info(nec_8048_spi_board_info, ARRAY_SIZE(nec_8048_spi_board_info)); zoom_lcd_panel_init(); -- cgit v1.2.3-18-g5258 From 540089798d2ae115fc9bff7ed3823c8c32249607 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 23 Feb 2011 09:50:15 +0100 Subject: x86: OLPC: Remove redundant !X64_64 config dependency OLPC is under if X86_32 already. Signed-off-by: Thomas Gleixner Cc: Andres Salomon --- arch/x86/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index d5ed94d30aa..e327f96b880 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -2068,7 +2068,7 @@ config OLPC bool "One Laptop Per Child support" select GPIOLIB select OLPC_OPENFIRMWARE - depends on !X86_64 && !X86_PAE + depends on !X86_PAE ---help--- Add support for detecting the unique features of the OLPC XO hardware. @@ -2081,7 +2081,7 @@ config OLPC_XO1 config OLPC_OPENFIRMWARE bool "Support for OLPC's Open Firmware" - depends on !X86_64 && !X86_PAE + depends on !X86_PAE default n select OF help -- cgit v1.2.3-18-g5258 From fe239545a1eed57a60c5d4063f0b56f6cd1811ff Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 23 Feb 2011 10:05:53 +0100 Subject: x86: OLPC: Hide OLPC_OPENFIRMWARE config switch OLPC selects OLPC_OPENFIRMWARE unconditionally. If OLPC=n then the OLPC_OPENFIRMWARE functionality is pointless. Signed-off-by: Thomas Gleixner Cc: Andres Salomon --- arch/x86/Kconfig | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index e327f96b880..dbc10fce666 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -2080,18 +2080,12 @@ config OLPC_XO1 Add support for non-essential features of the OLPC XO-1 laptop. config OLPC_OPENFIRMWARE - bool "Support for OLPC's Open Firmware" - depends on !X86_PAE - default n + bool select OF - help - This option adds support for the implementation of Open Firmware - that is used on the OLPC XO-1 Children's Machine. - If unsure, say N here. + select OLPC_OPENFIRMWARE_DT if PROC_DEVICETREE config OLPC_OPENFIRMWARE_DT bool - default y if OLPC_OPENFIRMWARE && PROC_DEVICETREE select OF_PROMTREE endif # X86_32 -- cgit v1.2.3-18-g5258 From dc3119e700216a70e82fe07a79f1618852058354 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 23 Feb 2011 10:08:31 +0100 Subject: x86: OLPC: Cleanup config maze completely Neither CONFIG_OLPC_OPENFIRMWARE nor CONFIG_OLPC_OPENFIRMWARE_DT are really necessary. OLPC selects OLPC_OPENFIRMWARE unconditionally, so move the "select OF" part under OLPC config option and fixup the dependencies in Makefiles and code. Signed-off-by: Thomas Gleixner Cc: Andres Salomon --- arch/x86/Kconfig | 10 +++------- arch/x86/include/asm/olpc_ofw.h | 11 ----------- arch/x86/kernel/head_32.S | 2 +- arch/x86/platform/olpc/Makefile | 2 +- 4 files changed, 5 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index dbc10fce666..677501d061a 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -2066,9 +2066,10 @@ config SCx200HR_TIMER config OLPC bool "One Laptop Per Child support" - select GPIOLIB - select OLPC_OPENFIRMWARE depends on !X86_PAE + select GPIOLIB + select OF + select OLPC_OPENFIRMWARE_DT if PROC_DEVICETREE ---help--- Add support for detecting the unique features of the OLPC XO hardware. @@ -2079,11 +2080,6 @@ config OLPC_XO1 ---help--- Add support for non-essential features of the OLPC XO-1 laptop. -config OLPC_OPENFIRMWARE - bool - select OF - select OLPC_OPENFIRMWARE_DT if PROC_DEVICETREE - config OLPC_OPENFIRMWARE_DT bool select OF_PROMTREE diff --git a/arch/x86/include/asm/olpc_ofw.h b/arch/x86/include/asm/olpc_ofw.h index 641988efe06..1fff2de124e 100644 --- a/arch/x86/include/asm/olpc_ofw.h +++ b/arch/x86/include/asm/olpc_ofw.h @@ -6,8 +6,6 @@ #define OLPC_OFW_SIG 0x2057464F /* aka "OFW " */ -#ifdef CONFIG_OLPC_OPENFIRMWARE - extern bool olpc_ofw_is_installed(void); /* run an OFW command by calling into the firmware */ @@ -26,15 +24,6 @@ extern void setup_olpc_ofw_pgd(void); /* check if OFW was detected during boot */ extern bool olpc_ofw_present(void); -#else /* !CONFIG_OLPC_OPENFIRMWARE */ - -static inline bool olpc_ofw_is_installed(void) { return false; } -static inline void olpc_ofw_detect(void) { } -static inline void setup_olpc_ofw_pgd(void) { } -static inline bool olpc_ofw_present(void) { return false; } - -#endif /* !CONFIG_OLPC_OPENFIRMWARE */ - #ifdef CONFIG_OLPC_OPENFIRMWARE_DT extern void olpc_dt_build_devicetree(void); #else diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index 767d6c43de3..d8cc18a8326 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -137,7 +137,7 @@ ENTRY(startup_32) movsl 1: -#ifdef CONFIG_OLPC_OPENFIRMWARE +#ifdef CONFIG_OLPC /* save OFW's pgdir table for later use when calling into OFW */ movl %cr3, %eax movl %eax, pa(olpc_ofw_pgd) diff --git a/arch/x86/platform/olpc/Makefile b/arch/x86/platform/olpc/Makefile index e797428b163..e18e641ae7b 100644 --- a/arch/x86/platform/olpc/Makefile +++ b/arch/x86/platform/olpc/Makefile @@ -1,4 +1,4 @@ obj-$(CONFIG_OLPC) += olpc.o obj-$(CONFIG_OLPC_XO1) += olpc-xo1.o -obj-$(CONFIG_OLPC_OPENFIRMWARE) += olpc_ofw.o +obj-$(CONFIG_OLPC) += olpc_ofw.o obj-$(CONFIG_OLPC_OPENFIRMWARE_DT) += olpc_dt.o -- cgit v1.2.3-18-g5258 From c2a941fadb57d157d59eec424674bd0c3a28788c Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 23 Feb 2011 10:32:42 +0100 Subject: x86: OLPC: Remove extra OLPC_OPENFIRMWARE_DT indirection OLPC_OPENFIRMWARE_DT is just there to be selected by OLPC and selects OF_PROMTREE. So let OLPC select OF_PROMTREE and remove that extra config indirection. Fixup code and Makefile and use CONFIG_OF_PROMTREE instead. Signed-off-by: Thomas Gleixner Cc: Andres Salomon --- arch/x86/Kconfig | 6 +----- arch/x86/include/asm/olpc_ofw.h | 4 ++-- arch/x86/platform/olpc/Makefile | 2 +- 3 files changed, 4 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 677501d061a..4f3d3d432ba 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -2069,7 +2069,7 @@ config OLPC depends on !X86_PAE select GPIOLIB select OF - select OLPC_OPENFIRMWARE_DT if PROC_DEVICETREE + select OF_PROMTREE if PROC_DEVICETREE ---help--- Add support for detecting the unique features of the OLPC XO hardware. @@ -2080,10 +2080,6 @@ config OLPC_XO1 ---help--- Add support for non-essential features of the OLPC XO-1 laptop. -config OLPC_OPENFIRMWARE_DT - bool - select OF_PROMTREE - endif # X86_32 config AMD_NB diff --git a/arch/x86/include/asm/olpc_ofw.h b/arch/x86/include/asm/olpc_ofw.h index 1fff2de124e..28a7fec0110 100644 --- a/arch/x86/include/asm/olpc_ofw.h +++ b/arch/x86/include/asm/olpc_ofw.h @@ -24,10 +24,10 @@ extern void setup_olpc_ofw_pgd(void); /* check if OFW was detected during boot */ extern bool olpc_ofw_present(void); -#ifdef CONFIG_OLPC_OPENFIRMWARE_DT +#ifdef CONFIG_OF_PROMTREE extern void olpc_dt_build_devicetree(void); #else static inline void olpc_dt_build_devicetree(void) { } -#endif /* CONFIG_OLPC_OPENFIRMWARE_DT */ +#endif #endif /* _ASM_X86_OLPC_OFW_H */ diff --git a/arch/x86/platform/olpc/Makefile b/arch/x86/platform/olpc/Makefile index e18e641ae7b..c2a8cab65e5 100644 --- a/arch/x86/platform/olpc/Makefile +++ b/arch/x86/platform/olpc/Makefile @@ -1,4 +1,4 @@ obj-$(CONFIG_OLPC) += olpc.o obj-$(CONFIG_OLPC_XO1) += olpc-xo1.o obj-$(CONFIG_OLPC) += olpc_ofw.o -obj-$(CONFIG_OLPC_OPENFIRMWARE_DT) += olpc_dt.o +obj-$(CONFIG_OF_PROMTREE) += olpc_dt.o -- cgit v1.2.3-18-g5258 From 4e034b245133adfd006ade5d7a809c9cac4beef9 Mon Sep 17 00:00:00 2001 From: Henrik Kretzschmar Date: Tue, 22 Feb 2011 15:38:03 +0100 Subject: x86: Move ioapic_irq_destination_types to apicdef.h This enum is used by non IOAPIC code, so apicdef.h is the best place for it. Signed-off-by: Henrik Kretzschmar LKML-Reference: <1298385487-4708-1-git-send-email-henne@nachtwindheim.de> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/apicdef.h | 12 ++++++++++++ arch/x86/include/asm/io_apic.h | 11 ----------- 2 files changed, 12 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/apicdef.h b/arch/x86/include/asm/apicdef.h index 47a30ff8e51..d87988bacf3 100644 --- a/arch/x86/include/asm/apicdef.h +++ b/arch/x86/include/asm/apicdef.h @@ -426,4 +426,16 @@ struct local_apic { #else #define BAD_APICID 0xFFFFu #endif + +enum ioapic_irq_destination_types { + dest_Fixed = 0, + dest_LowestPrio = 1, + dest_SMI = 2, + dest__reserved_1 = 3, + dest_NMI = 4, + dest_INIT = 5, + dest__reserved_2 = 6, + dest_ExtINT = 7 +}; + #endif /* _ASM_X86_APICDEF_H */ diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h index f327d386d6c..e1a9b0ef43b 100644 --- a/arch/x86/include/asm/io_apic.h +++ b/arch/x86/include/asm/io_apic.h @@ -63,17 +63,6 @@ union IO_APIC_reg_03 { } __attribute__ ((packed)) bits; }; -enum ioapic_irq_destination_types { - dest_Fixed = 0, - dest_LowestPrio = 1, - dest_SMI = 2, - dest__reserved_1 = 3, - dest_NMI = 4, - dest_INIT = 5, - dest__reserved_2 = 6, - dest_ExtINT = 7 -}; - struct IO_APIC_route_entry { __u32 vector : 8, delivery_mode : 3, /* 000: FIXED -- cgit v1.2.3-18-g5258 From b6a1432da81fa387d76215108dc9f6ea6d343aed Mon Sep 17 00:00:00 2001 From: Henrik Kretzschmar Date: Tue, 22 Feb 2011 15:38:04 +0100 Subject: x86: Add dummy mp_save_irq() This is a dummy function, used when no IOAPIC is compiled in. Signed-off-by: Henrik Kretzschmar LKML-Reference: <1298385487-4708-2-git-send-email-henne@nachtwindheim.de> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/io_apic.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h index e1a9b0ef43b..b24915fcd6d 100644 --- a/arch/x86/include/asm/io_apic.h +++ b/arch/x86/include/asm/io_apic.h @@ -188,6 +188,7 @@ static inline int mp_find_ioapic(u32 gsi) { return 0; } struct io_apic_irq_attr; static inline int io_apic_set_pci_routing(struct device *dev, int irq, struct io_apic_irq_attr *irq_attr) { return 0; } +static inline void mp_save_irq(struct mpc_intsrc *m) { }; #endif #endif /* _ASM_X86_IO_APIC_H */ -- cgit v1.2.3-18-g5258 From 7167d08e780a722fa79ea414fc4e72bc00751392 Mon Sep 17 00:00:00 2001 From: Henrik Kretzschmar Date: Tue, 22 Feb 2011 15:38:05 +0100 Subject: x86: Rework arch_disable_smp_support() for x86 Currently arch_disable_smp_support() on x86 disables only the support for the IOAPIC and is also compiled in if SMP-support is not. Therefore this function is renamed to disable_ioapic_support(), which meets its purpose and is only compiled in the kernel when IOAPIC support is also. A new arch_disable_smp_support() is created in smpboot.c, which calls disable_ioapic_support() and gets only compiled in the kernel when SMP support is also. Signed-off-by: Henrik Kretzschmar LKML-Reference: <1298385487-4708-3-git-send-email-henne@nachtwindheim.de> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/io_apic.h | 3 +++ arch/x86/kernel/apic/apic.c | 3 ++- arch/x86/kernel/apic/io_apic.c | 7 +++++-- arch/x86/kernel/smpboot.c | 11 ++++++++++- 4 files changed, 20 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h index b24915fcd6d..0be2f27b78f 100644 --- a/arch/x86/include/asm/io_apic.h +++ b/arch/x86/include/asm/io_apic.h @@ -175,6 +175,8 @@ extern void __init pre_init_apic_IRQ0(void); extern void mp_save_irq(struct mpc_intsrc *m); +extern void disable_ioapic_support(void); + #else /* !CONFIG_X86_IO_APIC */ #define io_apic_assign_pci_irqs 0 @@ -189,6 +191,7 @@ struct io_apic_irq_attr; static inline int io_apic_set_pci_routing(struct device *dev, int irq, struct io_apic_irq_attr *irq_attr) { return 0; } static inline void mp_save_irq(struct mpc_intsrc *m) { }; +static inline void disable_ioapic_support(void) { } #endif #endif /* _ASM_X86_IO_APIC_H */ diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 76b96d74978..96e68099b06 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -43,6 +43,7 @@ #include #include #include +#include #include #include #include @@ -1209,7 +1210,7 @@ void __cpuinit setup_local_APIC(void) rdtscll(tsc); if (disable_apic) { - arch_disable_smp_support(); + disable_ioapic_support(); return; } diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index ca9e2a3545a..a2f2bf8ab9d 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -108,7 +108,10 @@ DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES); int skip_ioapic_setup; -void arch_disable_smp_support(void) +/** + * disable_ioapic_support() - disables ioapic support at runtime + */ +void disable_ioapic_support(void) { #ifdef CONFIG_PCI noioapicquirk = 1; @@ -120,7 +123,7 @@ void arch_disable_smp_support(void) static int __init parse_noapic(char *str) { /* disable IO-APIC */ - arch_disable_smp_support(); + disable_ioapic_support(); return 0; } early_param("noapic", parse_noapic); diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 08776a95348..09d0172a005 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -64,6 +64,7 @@ #include #include #include +#include #include #include #include @@ -945,6 +946,14 @@ int __cpuinit native_cpu_up(unsigned int cpu) return 0; } +/** + * arch_disable_smp_support() - disables SMP support for x86 at runtime + */ +void arch_disable_smp_support(void) +{ + disable_ioapic_support(); +} + /* * Fall back to non SMP mode after errors. * @@ -1045,7 +1054,7 @@ static int __init smp_sanity_check(unsigned max_cpus) "(tell your hw vendor)\n"); } smpboot_clear_io_apic(); - arch_disable_smp_support(); + disable_ioapic_support(); return -1; } -- cgit v1.2.3-18-g5258 From 7d0f1926131cf79aa5998d463bf1582156e7b41e Mon Sep 17 00:00:00 2001 From: Henrik Kretzschmar Date: Tue, 22 Feb 2011 15:38:06 +0100 Subject: x86: Add dummy functions for compiling without IOAPIC This patch adds IOAPIC dummy functions for compilation with local APIC, but without IOAPIC. The local variable ioapic_entries in enable_IR_x2apic() does not need initialization anymore, since the dummy returns NULL. Signed-off-by: Henrik Kretzschmar LKML-Reference: <1298385487-4708-4-git-send-email-henne@nachtwindheim.de> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/io_apic.h | 18 ++++++++++++++++++ arch/x86/kernel/apic/apic.c | 2 +- 2 files changed, 19 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h index 0be2f27b78f..56dcf08bde6 100644 --- a/arch/x86/include/asm/io_apic.h +++ b/arch/x86/include/asm/io_apic.h @@ -190,6 +190,24 @@ static inline int mp_find_ioapic(u32 gsi) { return 0; } struct io_apic_irq_attr; static inline int io_apic_set_pci_routing(struct device *dev, int irq, struct io_apic_irq_attr *irq_attr) { return 0; } + +static inline struct IO_APIC_route_entry **alloc_ioapic_entries(void) +{ + return NULL; +} + +static inline void free_ioapic_entries(struct IO_APIC_route_entry **ent) { } +static inline int save_IO_APIC_setup(struct IO_APIC_route_entry **ent) +{ + return -ENOMEM; +} + +static inline void mask_IO_APIC_setup(struct IO_APIC_route_entry **ent) { } +static inline int restore_IO_APIC_setup(struct IO_APIC_route_entry **ent) +{ + return -ENOMEM; +} + static inline void mp_save_irq(struct mpc_intsrc *m) { }; static inline void disable_ioapic_support(void) { } #endif diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 96e68099b06..f0e079823c4 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1449,7 +1449,7 @@ int __init enable_IR(void) void __init enable_IR_x2apic(void) { unsigned long flags; - struct IO_APIC_route_entry **ioapic_entries = NULL; + struct IO_APIC_route_entry **ioapic_entries; int ret, x2apic_enabled = 0; int dmar_table_init_ret; -- cgit v1.2.3-18-g5258 From 1444e0c9daf0d3472677efc15588b192fc2db761 Mon Sep 17 00:00:00 2001 From: Henrik Kretzschmar Date: Tue, 22 Feb 2011 15:38:07 +0100 Subject: x86: Fix deps of X86_UP_IOAPIC Since commit 7cd92366a593246650cc7d6198e2c7d3af8c1d8a lAPIC enabled accidently the IOAPIC, which now gets fixed. Signed-off-by: Henrik Kretzschmar LKML-Reference: <1298385487-4708-5-git-send-email-henne@nachtwindheim.de> Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index d5ed94d30aa..867a8cf04fa 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -811,7 +811,7 @@ config X86_LOCAL_APIC config X86_IO_APIC def_bool y - depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC + depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_IOAPIC config X86_VISWS_APIC def_bool y -- cgit v1.2.3-18-g5258 From 939d578ecc62b07efeb186576ab190fe0b766501 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 23 Feb 2011 11:46:01 +0100 Subject: x86: OLPC: Make OLPC=n build again Stupid me missed the functions called from setup.c. Add the stubs back for OLPC=n Signed-off-by: Thomas Gleixner --- arch/x86/include/asm/olpc_ofw.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/x86/include/asm/olpc_ofw.h b/arch/x86/include/asm/olpc_ofw.h index 28a7fec0110..c5d3a5abbb9 100644 --- a/arch/x86/include/asm/olpc_ofw.h +++ b/arch/x86/include/asm/olpc_ofw.h @@ -6,6 +6,8 @@ #define OLPC_OFW_SIG 0x2057464F /* aka "OFW " */ +#ifdef CONFIG_OLPC + extern bool olpc_ofw_is_installed(void); /* run an OFW command by calling into the firmware */ @@ -24,6 +26,11 @@ extern void setup_olpc_ofw_pgd(void); /* check if OFW was detected during boot */ extern bool olpc_ofw_present(void); +#else /* !CONFIG_OLPC */ +static inline void olpc_ofw_detect(void) { } +static inline void setup_olpc_ofw_pgd(void) { } +#endif /* !CONFIG_OLPC */ + #ifdef CONFIG_OF_PROMTREE extern void olpc_dt_build_devicetree(void); #else -- cgit v1.2.3-18-g5258 From f19e0eec8b82faae4c2a5d129dfa9fe1cf66f5a9 Mon Sep 17 00:00:00 2001 From: Jesper Nilsson Date: Wed, 23 Feb 2011 13:04:25 +0100 Subject: Drop redundant __param section for CRISv32. The __param section is already brought in by RODATA above. Signed-off-by: Jesper Nilsson Signed-off-by: Linus Torvalds --- arch/cris/kernel/vmlinux.lds.S | 5 ----- 1 file changed, 5 deletions(-) (limited to 'arch') diff --git a/arch/cris/kernel/vmlinux.lds.S b/arch/cris/kernel/vmlinux.lds.S index 442218980db..c49be845f96 100644 --- a/arch/cris/kernel/vmlinux.lds.S +++ b/arch/cris/kernel/vmlinux.lds.S @@ -72,11 +72,6 @@ SECTIONS INIT_TEXT_SECTION(PAGE_SIZE) .init.data : { INIT_DATA } .init.setup : { INIT_SETUP(16) } -#ifdef CONFIG_ETRAX_ARCH_V32 - __start___param = .; - __param : { *(__param) } - __stop___param = .; -#endif .initcall.init : { INIT_CALLS } -- cgit v1.2.3-18-g5258 From dce72dd08c976c9e5e1367bf994b306b15ae87fe Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Mon, 21 Feb 2011 07:00:32 +0100 Subject: ARM: 6749/1: fold lookup_machine_type() into setup_machine() Since commit 6fc31d54 there is no callers for lookup_machine_type() other than setup_machine(). And if the former fails it won't return, therefore the error path in the later is dead code. Let's clean things up by merging them together. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/kernel/setup.c | 48 +++++++++++++++++------------------------------- 1 file changed, 17 insertions(+), 31 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 056bf1878f8..6ce80106316 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -325,28 +325,6 @@ static void __init early_print(const char *str, ...) printk("%s", buf); } -static struct machine_desc * __init lookup_machine_type(unsigned int type) -{ - extern struct machine_desc __arch_info_begin[], __arch_info_end[]; - struct machine_desc *p; - - for (p = __arch_info_begin; p < __arch_info_end; p++) - if (type == p->nr) - return p; - - early_print("\n" - "Error: unrecognized/unsupported machine ID (r1 = 0x%08x).\n\n" - "Available machine support:\n\nID (hex)\tNAME\n", type); - - for (p = __arch_info_begin; p < __arch_info_end; p++) - early_print("%08x\t%s\n", p->nr, p->name); - - early_print("\nPlease check your kernel config and/or bootloader.\n"); - - while (true) - /* can't use cpu_relax() here as it may require MMU setup */; -} - static void __init feat_v6_fixup(void) { int id = read_cpuid_id(); @@ -463,21 +441,29 @@ void cpu_init(void) static struct machine_desc * __init setup_machine(unsigned int nr) { - struct machine_desc *list; + extern struct machine_desc __arch_info_begin[], __arch_info_end[]; + struct machine_desc *p; /* * locate machine in the list of supported machines. */ - list = lookup_machine_type(nr); - if (!list) { - printk("Machine configuration botched (nr %d), unable " - "to continue.\n", nr); - while (1); - } + for (p = __arch_info_begin; p < __arch_info_end; p++) + if (nr == p->nr) { + printk("Machine: %s\n", p->name); + return p; + } - printk("Machine: %s\n", list->name); + early_print("\n" + "Error: unrecognized/unsupported machine ID (r1 = 0x%08x).\n\n" + "Available machine support:\n\nID (hex)\tNAME\n", nr); + + for (p = __arch_info_begin; p < __arch_info_end; p++) + early_print("%08x\t%s\n", p->nr, p->name); - return list; + early_print("\nPlease check your kernel config and/or bootloader.\n"); + + while (true) + /* can't use cpu_relax() here as it may require MMU setup */; } static int __init arm_add_memory(unsigned long start, unsigned long size) -- cgit v1.2.3-18-g5258 From 3572bea8cbc57f0bef1e0f4580c01717df7026d8 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Mon, 21 Feb 2011 06:57:33 +0100 Subject: ARM: 6748/1: ignore mdesc->boot_params if out of range The initial MMU table created in head.S contains a 1 MB mapping at the start of memory to let the early kernel boot code access the boot params specified by mdesc->boot_params. When using CONFIG_ARM_PATCH_PHYS_VIRT it is possible for the kernel to have a different idea of where the start of memory is at run time, making the compile-time determined mdesc->boot_params pointing to a memory area which is not mapped. Any access to the boot params in that case will fault and silently hang the kernel at that point. It is therefore a better idea to simply ignore mdesc->boot_params in that case and give the kernel a chance to print some diagnostic on the console later. If the bootloader provides a valid pointer in r2 to the kernel then this is used instead of mdesc->boot_params, and an explicit mapping is already created in the initial MMU table for it. It is therefore a good idea to use that facility when using a relocated kernel. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/kernel/setup.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 6ce80106316..f43f041a097 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -839,8 +839,25 @@ void __init setup_arch(char **cmdline_p) if (__atags_pointer) tags = phys_to_virt(__atags_pointer); - else if (mdesc->boot_params) - tags = phys_to_virt(mdesc->boot_params); + else if (mdesc->boot_params) { +#ifdef CONFIG_MMU + /* + * We still are executing with a minimal MMU mapping created + * with the presumption that the machine default for this + * is located in the first MB of RAM. Anything else will + * fault and silently hang the kernel at this point. + */ + if (mdesc->boot_params < PHYS_OFFSET || + mdesc->boot_params >= PHYS_OFFSET + SZ_1M) { + printk(KERN_WARNING + "Default boot params at physical 0x%08lx out of reach\n", + mdesc->boot_params); + } else +#endif + { + tags = phys_to_virt(mdesc->boot_params); + } + } #if defined(CONFIG_DEPRECATED_PARAM_STRUCT) /* -- cgit v1.2.3-18-g5258 From 97594b0f35c0708cb9551c070b9693a52ec24ebf Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Tue, 22 Feb 2011 23:29:37 +0100 Subject: ARM: 6757/1: fix tlb.h induced linux/swap.h build failure MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 06824ba (ARM: tlb: delay page freeing for SMP and ARMv7 CPUs) introduced a build failure for builds with CONFIG_SWAP=n: In file included from arch/arm/mm/init.c:27: arch/arm/include/asm/tlb.h: In function 'tlb_flush_mmu': arch/arm/include/asm/tlb.h:101: error: implicit declaration of function 'release_pages' arch/arm/include/asm/tlb.h: In function 'tlb_remove_page': arch/arm/include/asm/tlb.h:165: error: implicit declaration of function 'page_cache_release' as linux/swap.h doesn't include linux/pagemap.h but actually needs it (see comments in linux/swap.h as to why this is.) Fix that by #including in as it's done by x86. Signed-off-by: Uwe Kleine-König Acked-by: Tony Lindgren Signed-off-by: Russell King --- arch/arm/include/asm/pgalloc.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/include/asm/pgalloc.h b/arch/arm/include/asm/pgalloc.h index 9763be04f77..22de005f159 100644 --- a/arch/arm/include/asm/pgalloc.h +++ b/arch/arm/include/asm/pgalloc.h @@ -10,6 +10,8 @@ #ifndef _ASMARM_PGALLOC_H #define _ASMARM_PGALLOC_H +#include + #include #include #include -- cgit v1.2.3-18-g5258 From bf0c11183fc3a2acce56d2b53f2a117322bd3c3b Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Fri, 18 Feb 2011 21:31:41 +0100 Subject: ARM: 6744/1: mxs: irq_data conversion MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Uwe Kleine-König Acked-by: Lennert Buytenhek Acked-by: Sascha Hauer Signed-off-by: Russell King --- arch/arm/mach-mxs/gpio.c | 30 +++++++++++++++--------------- arch/arm/mach-mxs/icoll.c | 16 ++++++++-------- 2 files changed, 23 insertions(+), 23 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mxs/gpio.c b/arch/arm/mach-mxs/gpio.c index cb0c0e83a52..61991e4dde4 100644 --- a/arch/arm/mach-mxs/gpio.c +++ b/arch/arm/mach-mxs/gpio.c @@ -68,29 +68,29 @@ static void set_gpio_irqenable(struct mxs_gpio_port *port, u32 index, } } -static void mxs_gpio_ack_irq(u32 irq) +static void mxs_gpio_ack_irq(struct irq_data *d) { - u32 gpio = irq_to_gpio(irq); + u32 gpio = irq_to_gpio(d->irq); clear_gpio_irqstatus(&mxs_gpio_ports[gpio / 32], gpio & 0x1f); } -static void mxs_gpio_mask_irq(u32 irq) +static void mxs_gpio_mask_irq(struct irq_data *d) { - u32 gpio = irq_to_gpio(irq); + u32 gpio = irq_to_gpio(d->irq); set_gpio_irqenable(&mxs_gpio_ports[gpio / 32], gpio & 0x1f, 0); } -static void mxs_gpio_unmask_irq(u32 irq) +static void mxs_gpio_unmask_irq(struct irq_data *d) { - u32 gpio = irq_to_gpio(irq); + u32 gpio = irq_to_gpio(d->irq); set_gpio_irqenable(&mxs_gpio_ports[gpio / 32], gpio & 0x1f, 1); } static int mxs_gpio_get(struct gpio_chip *chip, unsigned offset); -static int mxs_gpio_set_irq_type(u32 irq, u32 type) +static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type) { - u32 gpio = irq_to_gpio(irq); + u32 gpio = irq_to_gpio(d->irq); u32 pin_mask = 1 << (gpio & 31); struct mxs_gpio_port *port = &mxs_gpio_ports[gpio / 32]; void __iomem *pin_addr; @@ -160,9 +160,9 @@ static void mxs_gpio_irq_handler(u32 irq, struct irq_desc *desc) * @param enable enable as wake-up if equal to non-zero * @return This function returns 0 on success. */ -static int mxs_gpio_set_wake_irq(u32 irq, u32 enable) +static int mxs_gpio_set_wake_irq(struct irq_data *d, unsigned int enable) { - u32 gpio = irq_to_gpio(irq); + u32 gpio = irq_to_gpio(d->irq); u32 gpio_idx = gpio & 0x1f; struct mxs_gpio_port *port = &mxs_gpio_ports[gpio / 32]; @@ -182,11 +182,11 @@ static int mxs_gpio_set_wake_irq(u32 irq, u32 enable) } static struct irq_chip gpio_irq_chip = { - .ack = mxs_gpio_ack_irq, - .mask = mxs_gpio_mask_irq, - .unmask = mxs_gpio_unmask_irq, - .set_type = mxs_gpio_set_irq_type, - .set_wake = mxs_gpio_set_wake_irq, + .irq_ack = mxs_gpio_ack_irq, + .irq_mask = mxs_gpio_mask_irq, + .irq_unmask = mxs_gpio_unmask_irq, + .irq_set_type = mxs_gpio_set_irq_type, + .irq_set_wake = mxs_gpio_set_wake_irq, }; static void mxs_set_gpio_direction(struct gpio_chip *chip, unsigned offset, diff --git a/arch/arm/mach-mxs/icoll.c b/arch/arm/mach-mxs/icoll.c index 5dd43ba7005..0f4c120fc16 100644 --- a/arch/arm/mach-mxs/icoll.c +++ b/arch/arm/mach-mxs/icoll.c @@ -34,7 +34,7 @@ static void __iomem *icoll_base = MXS_IO_ADDRESS(MXS_ICOLL_BASE_ADDR); -static void icoll_ack_irq(unsigned int irq) +static void icoll_ack_irq(struct irq_data *d) { /* * The Interrupt Collector is able to prioritize irqs. @@ -45,22 +45,22 @@ static void icoll_ack_irq(unsigned int irq) icoll_base + HW_ICOLL_LEVELACK); } -static void icoll_mask_irq(unsigned int irq) +static void icoll_mask_irq(struct irq_data *d) { __raw_writel(BM_ICOLL_INTERRUPTn_ENABLE, - icoll_base + HW_ICOLL_INTERRUPTn_CLR(irq)); + icoll_base + HW_ICOLL_INTERRUPTn_CLR(d->irq)); } -static void icoll_unmask_irq(unsigned int irq) +static void icoll_unmask_irq(struct irq_data *d) { __raw_writel(BM_ICOLL_INTERRUPTn_ENABLE, - icoll_base + HW_ICOLL_INTERRUPTn_SET(irq)); + icoll_base + HW_ICOLL_INTERRUPTn_SET(d->irq)); } static struct irq_chip mxs_icoll_chip = { - .ack = icoll_ack_irq, - .mask = icoll_mask_irq, - .unmask = icoll_unmask_irq, + .irq_ack = icoll_ack_irq, + .irq_mask = icoll_mask_irq, + .irq_unmask = icoll_unmask_irq, }; void __init icoll_init_irq(void) -- cgit v1.2.3-18-g5258 From aa25afad2ca60d19457849ea75e9c31236f4e174 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 19 Feb 2011 15:55:00 +0000 Subject: ARM: amba: make probe() functions take const id tables Make Primecell driver probe functions take a const pointer to their ID tables. Drivers should never modify their ID tables in their probe handler. Signed-off-by: Russell King --- arch/arm/kernel/etm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/etm.c b/arch/arm/kernel/etm.c index 11db62806a1..052b509e2d5 100644 --- a/arch/arm/kernel/etm.c +++ b/arch/arm/kernel/etm.c @@ -338,7 +338,7 @@ static struct miscdevice etb_miscdev = { .fops = &etb_fops, }; -static int __init etb_probe(struct amba_device *dev, struct amba_id *id) +static int __init etb_probe(struct amba_device *dev, const struct amba_id *id) { struct tracectx *t = &tracer; int ret = 0; @@ -530,7 +530,7 @@ static ssize_t trace_mode_store(struct kobject *kobj, static struct kobj_attribute trace_mode_attr = __ATTR(trace_mode, 0644, trace_mode_show, trace_mode_store); -static int __init etm_probe(struct amba_device *dev, struct amba_id *id) +static int __init etm_probe(struct amba_device *dev, const struct amba_id *id) { struct tracectx *t = &tracer; int ret = 0; -- cgit v1.2.3-18-g5258 From c8d6b8fe72216ca47e399204b58c8be0448d4083 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 23 Feb 2011 14:29:34 +0100 Subject: x86: ioapic: Remove silly debug bloat in setup_IOAPIC_irqs() This is debug code and it does not matter at all whether we print each not connected pin in an extra line or try to be extra clever. Signed-off-by: Thomas Gleixner --- arch/x86/kernel/apic/io_apic.c | 32 ++++++++++++-------------------- 1 file changed, 12 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index a2f2bf8ab9d..e33ccb45d0f 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -1388,9 +1388,19 @@ static struct { DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1); } mp_ioapic_routing[MAX_IO_APICS]; +static bool __init io_apic_pin_not_connected(int idx, int apic_id, int pin) +{ + if (idx != -1) + return false; + + apic_printk(APIC_VERBOSE, KERN_DEBUG " apic %d pin %d not connected\n", + mp_ioapics[apic_id].apicid, pin); + return true; +} + static void __init setup_IO_APIC_irqs(void) { - int apic_id, pin, idx, irq, notcon = 0; + int apic_id, pin, idx, irq; int node = cpu_to_node(0); struct irq_cfg *cfg; @@ -1399,22 +1409,8 @@ static void __init setup_IO_APIC_irqs(void) for (apic_id = 0; apic_id < nr_ioapics; apic_id++) for (pin = 0; pin < nr_ioapic_registers[apic_id]; pin++) { idx = find_irq_entry(apic_id, pin, mp_INT); - if (idx == -1) { - if (!notcon) { - notcon = 1; - apic_printk(APIC_VERBOSE, - KERN_DEBUG " %d-%d", - mp_ioapics[apic_id].apicid, pin); - } else - apic_printk(APIC_VERBOSE, " %d-%d", - mp_ioapics[apic_id].apicid, pin); + if (io_apic_pin_not_connected(idx, apic_id, pin)) continue; - } - if (notcon) { - apic_printk(APIC_VERBOSE, - " (apicid-pin) not connected\n"); - notcon = 0; - } irq = pin_2_irq(idx, apic_id, pin); @@ -1441,10 +1437,6 @@ static void __init setup_IO_APIC_irqs(void) setup_ioapic_irq(apic_id, pin, irq, cfg, irq_trigger(idx), irq_polarity(idx)); } - - if (notcon) - apic_printk(APIC_VERBOSE, - " (apicid-pin) not connected\n"); } /* -- cgit v1.2.3-18-g5258 From ed972ccf434a9881a5881915ae04602af2776bad Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 23 Feb 2011 14:31:36 +0100 Subject: x86: ioapic: Split out the nested loop in setup_IO_APIC_irqs() Two consecutive for(...) for(...) lines to avoid an extra indentation are just horrible to read. I had to look more than once to figure out what the code is doing. Split out the inner loop into a separate function. Signed-off-by: Thomas Gleixner --- arch/x86/kernel/apic/io_apic.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index e33ccb45d0f..f751a82d4cb 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -1398,15 +1398,12 @@ static bool __init io_apic_pin_not_connected(int idx, int apic_id, int pin) return true; } -static void __init setup_IO_APIC_irqs(void) +static void __init __io_apic_setup_irqs(unsigned int apic_id) { - int apic_id, pin, idx, irq; - int node = cpu_to_node(0); + int idx, node = cpu_to_node(0); + unsigned int pin, irq; struct irq_cfg *cfg; - apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n"); - - for (apic_id = 0; apic_id < nr_ioapics; apic_id++) for (pin = 0; pin < nr_ioapic_registers[apic_id]; pin++) { idx = find_irq_entry(apic_id, pin, mp_INT); if (io_apic_pin_not_connected(idx, apic_id, pin)) @@ -1439,6 +1436,16 @@ static void __init setup_IO_APIC_irqs(void) } } +static void __init setup_IO_APIC_irqs(void) +{ + unsigned int apic_id; + + apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n"); + + for (apic_id = 0; apic_id < nr_ioapics; apic_id++) + __io_apic_setup_irqs(apic_id); +} + /* * for the gsit that is not in first ioapic * but could not use acpi_register_gsi() -- cgit v1.2.3-18-g5258 From ff973d041e5ab9ada9e49f4e93ef3a699c511463 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 23 Feb 2011 13:00:56 +0100 Subject: x86: ioapic: Add io_apic_setup_irq_pin() There are about four places in the ioapic code which do exactly the same setup sequence. Also the OF based ioapic setup needs that function to avoid putting the OF specific code into ioapic.c Signed-off-by: Thomas Gleixner --- arch/x86/include/asm/io_apic.h | 2 ++ arch/x86/kernel/apic/io_apic.c | 15 +++++++++++++++ 2 files changed, 17 insertions(+) (limited to 'arch') diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h index 56dcf08bde6..37dbb3fae39 100644 --- a/arch/x86/include/asm/io_apic.h +++ b/arch/x86/include/asm/io_apic.h @@ -151,6 +151,8 @@ void setup_IO_APIC_irq_extra(u32 gsi); extern void ioapic_and_gsi_init(void); extern void ioapic_insert_resources(void); +int io_apic_setup_irq_pin(unsigned int irq, int node, struct io_apic_irq_attr *attr); + extern struct IO_APIC_route_entry **alloc_ioapic_entries(void); extern void free_ioapic_entries(struct IO_APIC_route_entry **ioapic_entries); extern int save_IO_APIC_setup(struct IO_APIC_route_entry **ioapic_entries); diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index f751a82d4cb..6deb3ca62fd 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -3607,6 +3607,21 @@ int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev) } #endif /* CONFIG_HT_IRQ */ +int +io_apic_setup_irq_pin(unsigned int irq, int node, struct io_apic_irq_attr *attr) +{ + struct irq_cfg *cfg = alloc_irq_and_cfg_at(irq, node); + int ret; + + if (!cfg) + return -EINVAL; + ret = __add_pin_to_irq_node(cfg, node, attr->ioapic, attr->ioapic_pin); + if (!ret) + setup_ioapic_irq(attr->ioapic, attr->ioapic_pin, irq, cfg, + attr->trigger, attr->polarity); + return ret; +} + int __init io_apic_get_redir_entries (int ioapic) { union IO_APIC_reg_01 reg_01; -- cgit v1.2.3-18-g5258 From f880ec78fabebc58180778d223600e9be7b48502 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 23 Feb 2011 13:07:54 +0100 Subject: x86: ioapic: Use new setup function in pre_init_apic_IRQ0() Remove the duplicated code and call the function. It does not matter whether we allocated the cfg before calling setup_local_APIC() and we can set the irq chip and handler after that as well. Signed-off-by: Thomas Gleixner --- arch/x86/kernel/apic/io_apic.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 6deb3ca62fd..51c8bd11c13 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -4103,20 +4103,15 @@ void __init mp_register_ioapic(int id, u32 address, u32 gsi_base) /* Enable IOAPIC early just for system timer */ void __init pre_init_apic_IRQ0(void) { - struct irq_cfg *cfg; + struct io_apic_irq_attr attr = { 0, 0, 0, 0 }; printk(KERN_INFO "Early APIC setup for system timer0\n"); #ifndef CONFIG_SMP physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map); #endif - /* Make sure the irq descriptor is set up */ - cfg = alloc_irq_and_cfg_at(0, 0); - setup_local_APIC(); - add_pin_to_irq_node(cfg, 0, 0, 0); + io_apic_setup_irq_pin(0, 0, &attr); set_irq_chip_and_handler_name(0, &ioapic_chip, handle_edge_irq, "edge"); - - setup_ioapic_irq(0, 0, 0, cfg, 0, 0); } -- cgit v1.2.3-18-g5258 From e0799c04b2080e0832538a911361f962c93fb744 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 23 Feb 2011 14:10:54 +0100 Subject: x86: ioapic: Use setup function in __io_apic_set_pci_routing() The only difference here is that we did not call __add_pin_to_irq_node() for the legacy irqs, but that's not worth 30 lines of extra code. Signed-off-by: Thomas Gleixner --- arch/x86/kernel/apic/io_apic.c | 34 +++------------------------------- 1 file changed, 3 insertions(+), 31 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 51c8bd11c13..a655bd8fb06 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -3679,45 +3679,17 @@ int __init arch_probe_nr_irqs(void) static int __io_apic_set_pci_routing(struct device *dev, int irq, struct io_apic_irq_attr *irq_attr) { - struct irq_cfg *cfg; int node; - int ioapic, pin; - int trigger, polarity; - ioapic = irq_attr->ioapic; if (!IO_APIC_IRQ(irq)) { apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n", - ioapic); + irq_attr->ioapic); return -EINVAL; } - if (dev) - node = dev_to_node(dev); - else - node = cpu_to_node(0); - - cfg = alloc_irq_and_cfg_at(irq, node); - if (!cfg) - return 0; - - pin = irq_attr->ioapic_pin; - trigger = irq_attr->trigger; - polarity = irq_attr->polarity; - - /* - * IRQs < 16 are already in the irq_2_pin[] map - */ - if (irq >= legacy_pic->nr_legacy_irqs) { - if (__add_pin_to_irq_node(cfg, node, ioapic, pin)) { - printk(KERN_INFO "can not add pin %d for irq %d\n", - pin, irq); - return 0; - } - } - - setup_ioapic_irq(ioapic, pin, irq, cfg, trigger, polarity); + node = dev ? dev_to_node(dev) : cpu_to_node(0); - return 0; + return io_apic_setup_irq_pin(irq, node, irq_attr); } int io_apic_set_pci_routing(struct device *dev, int irq, -- cgit v1.2.3-18-g5258 From 2d57e37dbf648fd6547752b8954f4104a85f4b15 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 23 Feb 2011 14:40:35 +0100 Subject: x86: ioapic: Use setup function in __io_apic_setup_irqs() Replace the duplicated code. Signed-off-by: Thomas Gleixner --- arch/x86/kernel/apic/io_apic.c | 17 +++++------------ 1 file changed, 5 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index a655bd8fb06..63140d86759 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -1401,8 +1401,8 @@ static bool __init io_apic_pin_not_connected(int idx, int apic_id, int pin) static void __init __io_apic_setup_irqs(unsigned int apic_id) { int idx, node = cpu_to_node(0); + struct io_apic_irq_attr attr; unsigned int pin, irq; - struct irq_cfg *cfg; for (pin = 0; pin < nr_ioapic_registers[apic_id]; pin++) { idx = find_irq_entry(apic_id, pin, mp_INT); @@ -1419,20 +1419,13 @@ static void __init __io_apic_setup_irqs(unsigned int apic_id) * installed and if it returns 1: */ if (apic->multi_timer_check && - apic->multi_timer_check(apic_id, irq)) + apic->multi_timer_check(apic_id, irq)) continue; - cfg = alloc_irq_and_cfg_at(irq, node); - if (!cfg) - continue; + set_io_apic_irq_attr(&attr, apic_id, pin, irq_trigger(idx), + irq_polarity(idx)); - add_pin_to_irq_node(cfg, node, apic_id, pin); - /* - * don't mark it in pin_programmed, so later acpi could - * set it correctly when irq < 16 - */ - setup_ioapic_irq(apic_id, pin, irq, cfg, irq_trigger(idx), - irq_polarity(idx)); + io_apic_setup_irq_pin(irq, node, &attr); } } -- cgit v1.2.3-18-g5258 From da1ad9d7b2477594e8ff43706644ba8a375ad62a Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 23 Feb 2011 14:52:16 +0100 Subject: x86: ioapic: Use setup function in setup_IO_APIC_irq_extra() Another version of the same thing. Only set the pin programmed, when the setup function succeeds. Signed-off-by: Thomas Gleixner --- arch/x86/kernel/apic/io_apic.c | 16 ++++++---------- 1 file changed, 6 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 63140d86759..cfd9611036c 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -1447,7 +1447,7 @@ static void __init setup_IO_APIC_irqs(void) void setup_IO_APIC_irq_extra(u32 gsi) { int apic_id = 0, pin, idx, irq, node = cpu_to_node(0); - struct irq_cfg *cfg; + struct io_apic_irq_attr attr; /* * Convert 'gsi' to 'ioapic.pin'. @@ -1467,21 +1467,17 @@ void setup_IO_APIC_irq_extra(u32 gsi) if (apic_id == 0 || irq < NR_IRQS_LEGACY) return; - cfg = alloc_irq_and_cfg_at(irq, node); - if (!cfg) - return; - - add_pin_to_irq_node(cfg, node, apic_id, pin); - if (test_bit(pin, mp_ioapic_routing[apic_id].pin_programmed)) { pr_debug("Pin %d-%d already programmed\n", mp_ioapics[apic_id].apicid, pin); return; } - set_bit(pin, mp_ioapic_routing[apic_id].pin_programmed); - setup_ioapic_irq(apic_id, pin, irq, cfg, - irq_trigger(idx), irq_polarity(idx)); + set_io_apic_irq_attr(&attr, apic_id, pin, irq_trigger(idx), + irq_polarity(idx)); + + if (!io_apic_setup_irq_pin(irq, node, &attr)) + set_bit(pin, mp_ioapic_routing[apic_id].pin_programmed); } /* -- cgit v1.2.3-18-g5258 From 41098ffe050c4befe5fc21a5cedd42ebbd6f7469 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 23 Feb 2011 16:08:03 +0100 Subject: x86: ioapic: Make a few functions static No users outside of io_apic.c. Mark bad_ioapic() __init while at it. Signed-off-by: Thomas Gleixner --- arch/x86/include/asm/io_apic.h | 5 ---- arch/x86/kernel/apic/io_apic.c | 55 +++++++++++++++++++++--------------------- 2 files changed, 28 insertions(+), 32 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h index 37dbb3fae39..be61e22dd9e 100644 --- a/arch/x86/include/asm/io_apic.h +++ b/arch/x86/include/asm/io_apic.h @@ -139,11 +139,6 @@ extern int timer_through_8259; #define io_apic_assign_pci_irqs \ (mp_irq_entries && !skip_ioapic_setup && io_apic_irqs) -extern u8 io_apic_unique_id(u8 id); -extern int io_apic_get_unique_id(int ioapic, int apic_id); -extern int io_apic_get_version(int ioapic); -extern int io_apic_get_redir_entries(int ioapic); - struct io_apic_irq_attr; extern int io_apic_set_pci_routing(struct device *dev, int irq, struct io_apic_irq_attr *irq_attr); diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index cfd9611036c..7344b428e08 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -3611,7 +3611,7 @@ io_apic_setup_irq_pin(unsigned int irq, int node, struct io_apic_irq_attr *attr) return ret; } -int __init io_apic_get_redir_entries (int ioapic) +static int __init io_apic_get_redir_entries(int ioapic) { union IO_APIC_reg_01 reg_01; unsigned long flags; @@ -3702,31 +3702,8 @@ int io_apic_set_pci_routing(struct device *dev, int irq, return __io_apic_set_pci_routing(dev, irq, irq_attr); } -u8 __init io_apic_unique_id(u8 id) -{ -#ifdef CONFIG_X86_32 - if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && - !APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) - return io_apic_get_unique_id(nr_ioapics, id); - else - return id; -#else - int i; - DECLARE_BITMAP(used, 256); - - bitmap_zero(used, 256); - for (i = 0; i < nr_ioapics; i++) { - struct mpc_ioapic *ia = &mp_ioapics[i]; - __set_bit(ia->apicid, used); - } - if (!test_bit(id, used)) - return id; - return find_first_zero_bit(used, 256); -#endif -} - #ifdef CONFIG_X86_32 -int __init io_apic_get_unique_id(int ioapic, int apic_id) +static int __init io_apic_get_unique_id(int ioapic, int apic_id) { union IO_APIC_reg_00 reg_00; static physid_mask_t apic_id_map = PHYSID_MASK_NONE; @@ -3799,9 +3776,33 @@ int __init io_apic_get_unique_id(int ioapic, int apic_id) return apic_id; } + +static u8 __init io_apic_unique_id(u8 id) +{ + if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && + !APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) + return io_apic_get_unique_id(nr_ioapics, id); + else + return id; +} +#else +static u8 __init io_apic_unique_id(u8 id) +{ + int i; + DECLARE_BITMAP(used, 256); + + bitmap_zero(used, 256); + for (i = 0; i < nr_ioapics; i++) { + struct mpc_ioapic *ia = &mp_ioapics[i]; + __set_bit(ia->apicid, used); + } + if (!test_bit(id, used)) + return id; + return find_first_zero_bit(used, 256); +} #endif -int __init io_apic_get_version(int ioapic) +static int __init io_apic_get_version(int ioapic) { union IO_APIC_reg_01 reg_01; unsigned long flags; @@ -4004,7 +4005,7 @@ int mp_find_ioapic_pin(int ioapic, u32 gsi) return gsi - mp_gsi_routing[ioapic].gsi_base; } -static int bad_ioapic(unsigned long address) +static __init int bad_ioapic(unsigned long address) { if (nr_ioapics >= MAX_IO_APICS) { printk(KERN_WARNING "WARING: Max # of I/O APICs (%d) exceeded " -- cgit v1.2.3-18-g5258 From b77cf6a8609a8450786c572bc8af6ad068022dbe Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 23 Feb 2011 17:33:53 +0100 Subject: x86: ioapic: Remove useless inlines There is no point to have irq_trigger() and irq_polarity() as wrappers around the MPBIOS_* camel case functions. Get rid of both the inlines and the ugly camel case. Signed-off-by: Thomas Gleixner --- arch/x86/kernel/apic/io_apic.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 7344b428e08..2d49e4b41c2 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -821,7 +821,7 @@ static int EISA_ELCR(unsigned int irq) #define default_MCA_trigger(idx) (1) #define default_MCA_polarity(idx) default_ISA_polarity(idx) -static int MPBIOS_polarity(int idx) +static int irq_polarity(int idx) { int bus = mp_irqs[idx].srcbus; int polarity; @@ -863,7 +863,7 @@ static int MPBIOS_polarity(int idx) return polarity; } -static int MPBIOS_trigger(int idx) +static int irq_trigger(int idx) { int bus = mp_irqs[idx].srcbus; int trigger; @@ -935,16 +935,6 @@ static int MPBIOS_trigger(int idx) return trigger; } -static inline int irq_polarity(int idx) -{ - return MPBIOS_polarity(idx); -} - -static inline int irq_trigger(int idx) -{ - return MPBIOS_trigger(idx); -} - static int pin_2_irq(int idx, int apic, int pin) { int irq; -- cgit v1.2.3-18-g5258 From 459c1517f9873b198af7dcded8d8cc84749bbb69 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 8 Jan 2011 11:49:20 +0000 Subject: ARM: DMA: top-down allocation in DMA coherent region Achieve better usage of the DMA coherent region by doing top-down allocation rather than bottom up. If we ask for a 128kB allocation, this will be aligned to 128kB and satisfied from the very bottom address. If we then ask for a 600kB allocation, this will be aligned to 1MB, and we will have a 896kB hole. Performing top-down allocation resolves this by allocating the 128kB at the very top, and then the 600kB can come in below it without any unnecessary wastage. This problem was reported by Janusz Krzysztofik, who had 2 x 128kB + 1 x 640kB allocations which wouldn't fit into 1MB. Tested-by: Janusz Krzysztofik Signed-off-by: Russell King --- arch/arm/mm/vmregion.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/vmregion.c b/arch/arm/mm/vmregion.c index 935993e1b1e..036fdbfdd62 100644 --- a/arch/arm/mm/vmregion.c +++ b/arch/arm/mm/vmregion.c @@ -38,7 +38,7 @@ struct arm_vmregion * arm_vmregion_alloc(struct arm_vmregion_head *head, size_t align, size_t size, gfp_t gfp) { - unsigned long addr = head->vm_start, end = head->vm_end - size; + unsigned long start = head->vm_start, addr = head->vm_end; unsigned long flags; struct arm_vmregion *c, *new; @@ -54,21 +54,20 @@ arm_vmregion_alloc(struct arm_vmregion_head *head, size_t align, spin_lock_irqsave(&head->vm_lock, flags); - list_for_each_entry(c, &head->vm_list, vm_list) { - if ((addr + size) < addr) - goto nospc; - if ((addr + size) <= c->vm_start) + addr = rounddown(addr - size, align); + list_for_each_entry_reverse(c, &head->vm_list, vm_list) { + if (addr >= c->vm_end) goto found; - addr = ALIGN(c->vm_end, align); - if (addr > end) + addr = rounddown(c->vm_start - size, align); + if (addr < start) goto nospc; } found: /* - * Insert this entry _before_ the one we found. + * Insert this entry after the one we found. */ - list_add_tail(&new->vm_list, &c->vm_list); + list_add(&new->vm_list, &c->vm_list); new->vm_start = addr; new->vm_end = addr + size; new->vm_active = 1; -- cgit v1.2.3-18-g5258 From 2bbd7e9b74271b2d6a14b4840fc44afbea83774d Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 8 Jan 2011 12:05:09 +0000 Subject: ARM: fix some sparse errors in generic ARM code arch/arm/kernel/return_address.c:37:6: warning: symbol 'return_address' was not declared. Should it be static? arch/arm/kernel/setup.c:76:14: warning: symbol 'processor_id' was not declared. Should it be static? arch/arm/kernel/traps.c:259:1: warning: symbol 'die_lock' was not declared. Should it be static? arch/arm/vfp/vfpmodule.c:156:6: warning: symbol 'vfp_raise_sigfpe' was not declared. Should it be static? Signed-off-by: Russell King --- arch/arm/include/asm/cputype.h | 3 ++- arch/arm/kernel/return_address.c | 1 + arch/arm/kernel/traps.c | 2 +- arch/arm/vfp/vfpmodule.c | 2 +- 4 files changed, 5 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index 20ae96cc002..ed5bc9e05a4 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -23,6 +23,8 @@ #define CPUID_EXT_ISAR4 "c2, 4" #define CPUID_EXT_ISAR5 "c2, 5" +extern unsigned int processor_id; + #ifdef CONFIG_CPU_CP15 #define read_cpuid(reg) \ ({ \ @@ -43,7 +45,6 @@ __val; \ }) #else -extern unsigned int processor_id; #define read_cpuid(reg) (processor_id) #define read_cpuid_ext(reg) 0 #endif diff --git a/arch/arm/kernel/return_address.c b/arch/arm/kernel/return_address.c index df246da4cec..0b13a72f855 100644 --- a/arch/arm/kernel/return_address.c +++ b/arch/arm/kernel/return_address.c @@ -9,6 +9,7 @@ * the Free Software Foundation. */ #include +#include #if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) #include diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index ee57640ba2b..7f53c3651c5 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -256,7 +256,7 @@ static int __die(const char *str, int err, struct thread_info *thread, struct pt return ret; } -DEFINE_SPINLOCK(die_lock); +static DEFINE_SPINLOCK(die_lock); /* * This function is protected against re-entrancy. diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 0797cb528b4..25b89d81710 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -153,7 +153,7 @@ static struct notifier_block vfp_notifier_block = { * Raise a SIGFPE for the current process. * sicode describes the signal being raised. */ -void vfp_raise_sigfpe(unsigned int sicode, struct pt_regs *regs) +static void vfp_raise_sigfpe(unsigned int sicode, struct pt_regs *regs) { siginfo_t info; -- cgit v1.2.3-18-g5258 From a65d29225ed884456f3d34dcefd3a18df24af03b Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 8 Jan 2011 16:18:51 +0000 Subject: ARM: add 'uinstall' target for installing uboot kernels We have 'install' and 'zinstall' for installing Image and zImage kernels, so add 'uinstall' to complete the set. This allows developers to have a ~/bin/installkernel script which (eg) copies the kernel to the tftp server automatically once the kernel has built, resulting in a better workflow. Signed-off-by: Russell King --- arch/arm/Makefile | 3 ++- arch/arm/boot/Makefile | 4 ++++ 2 files changed, 6 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/Makefile b/arch/arm/Makefile index c22c1adfedd..da525bc9614 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -280,7 +280,7 @@ bzImage: zImage zImage Image xipImage bootpImage uImage: vmlinux $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ -zinstall install: vmlinux +zinstall uinstall install: vmlinux $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@ # We use MRPROPER_FILES and CLEAN_FILES now @@ -301,6 +301,7 @@ define archhelp echo ' (supply initrd image via make variable INITRD=)' echo ' install - Install uncompressed kernel' echo ' zinstall - Install compressed kernel' + echo ' uinstall - Install U-Boot wrapped compressed kernel' echo ' Install using (your) ~/bin/$(INSTALLKERNEL) or' echo ' (distribution) /sbin/$(INSTALLKERNEL) or' echo ' install to $$(INSTALL_PATH) and run lilo' diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 4d26f2c52a7..9128fddf110 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -99,6 +99,10 @@ zinstall: $(obj)/zImage $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ $(obj)/zImage System.map "$(INSTALL_PATH)" +uinstall: $(obj)/uImage + $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ + $(obj)/uImage System.map "$(INSTALL_PATH)" + zi: $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ $(obj)/zImage System.map "$(INSTALL_PATH)" -- cgit v1.2.3-18-g5258 From 68e6fad488ef21335529c65ca6c88c38be50cd3a Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 11 Jan 2011 19:57:14 +0000 Subject: ARM: improve module relocation fixup diagnostics Current diagnostics are rather poor when things go wrong: ipv6: relocation out of range, section 2 reloc 0 sym 'snmp_mib_free' Let's include a little more information about the problem: ipv6: section 2 reloc 0 sym 'snmp_mib_free': relocation 28 out of range (0xbf0000a4 -> 0xc11b4858) so that we show exactly what the problem is - not only what type of relocation but also the offending address range too. Signed-off-by: Russell King --- arch/arm/kernel/module.c | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index 2cfe8161b47..980fe20a376 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -75,6 +75,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, for (i = 0; i < relsec->sh_size / sizeof(Elf32_Rel); i++, rel++) { unsigned long loc; Elf32_Sym *sym; + const char *symname; s32 offset; #ifdef CONFIG_THUMB2_KERNEL u32 upper, lower, sign, j1, j2; @@ -82,18 +83,18 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, offset = ELF32_R_SYM(rel->r_info); if (offset < 0 || offset > (symsec->sh_size / sizeof(Elf32_Sym))) { - printk(KERN_ERR "%s: bad relocation, section %d reloc %d\n", + pr_err("%s: section %u reloc %u: bad relocation sym offset\n", module->name, relindex, i); return -ENOEXEC; } sym = ((Elf32_Sym *)symsec->sh_addr) + offset; + symname = strtab + sym->st_name; if (rel->r_offset < 0 || rel->r_offset > dstsec->sh_size - sizeof(u32)) { - printk(KERN_ERR "%s: out of bounds relocation, " - "section %d reloc %d offset %d size %d\n", - module->name, relindex, i, rel->r_offset, - dstsec->sh_size); + pr_err("%s: section %u reloc %u sym '%s': out of bounds relocation, offset %d size %u\n", + module->name, relindex, i, symname, + rel->r_offset, dstsec->sh_size); return -ENOEXEC; } @@ -119,10 +120,10 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, if (offset & 3 || offset <= (s32)0xfe000000 || offset >= (s32)0x02000000) { - printk(KERN_ERR - "%s: relocation out of range, section " - "%d reloc %d sym '%s'\n", module->name, - relindex, i, strtab + sym->st_name); + pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n", + module->name, relindex, i, symname, + ELF32_R_TYPE(rel->r_info), loc, + sym->st_value); return -ENOEXEC; } @@ -195,10 +196,10 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, if (!(offset & 1) || offset <= (s32)0xff000000 || offset >= (s32)0x01000000) { - printk(KERN_ERR - "%s: relocation out of range, section " - "%d reloc %d sym '%s'\n", module->name, - relindex, i, strtab + sym->st_name); + pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n", + module->name, relindex, i, symname, + ELF32_R_TYPE(rel->r_info), loc, + sym->st_value); return -ENOEXEC; } -- cgit v1.2.3-18-g5258 From a9f43c113d7435441fb024d265aecacc4f623f5e Mon Sep 17 00:00:00 2001 From: Colin Tuckley Date: Thu, 6 Jan 2011 11:16:49 +0100 Subject: ARM: 6608/1: enable bridges in pci_common_init. Add a missing call to pci_enable_bridges() so that devices behind bridges get found by the pci bus scan. Signed-off-by: Chris Partington Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/kernel/bios32.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index c6273a3bfc2..d86fcd44b22 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -583,6 +583,11 @@ void __init pci_common_init(struct hw_pci *hw) * Assign resources. */ pci_bus_assign_resources(bus); + + /* + * Enable bridges + */ + pci_enable_bridges(bus); } /* -- cgit v1.2.3-18-g5258 From 1dbfa187dad57d3e17207328ec8bd2d90b4177d2 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 23 Jan 2011 12:08:16 +0000 Subject: ARM: irq migration: force migration off CPU going down The force argument to irq_set_affinity really should be 'true' as moving IRQs off a CPU which is going down isn't optional. Acked-by: Thomas Gleixner Signed-off-by: Russell King --- arch/arm/kernel/irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 28536e352de..2f19aa5f339 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -185,7 +185,7 @@ static void route_irq(struct irq_desc *desc, unsigned int irq, unsigned int cpu) raw_spin_lock_irq(&desc->lock); desc->irq_data.chip->irq_set_affinity(&desc->irq_data, - cpumask_of(cpu), false); + cpumask_of(cpu), true); raw_spin_unlock_irq(&desc->lock); } -- cgit v1.2.3-18-g5258 From 617912440bf20497d23d01ab58076998aced3f15 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 23 Jan 2011 12:09:36 +0000 Subject: ARM: irq migration: ensure migration is handled safely Ensure appropriate locks are taken to ensure that IRQ migration off the current CPU is race-free. We may have a concurrent set_affinity via procfs running on another CPU in parallel with the IRQ migration, resulting in unpredictable results. Signed-off-by: Russell King --- arch/arm/kernel/irq.c | 50 +++++++++++++++++++++++++++++++------------------- 1 file changed, 31 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 2f19aa5f339..3535d3793e6 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -179,14 +179,21 @@ int __init arch_probe_nr_irqs(void) #ifdef CONFIG_HOTPLUG_CPU -static void route_irq(struct irq_desc *desc, unsigned int irq, unsigned int cpu) +static bool migrate_one_irq(struct irq_data *d) { - pr_debug("IRQ%u: moving from cpu%u to cpu%u\n", irq, desc->irq_data.node, cpu); + unsigned int cpu = cpumask_any_and(d->affinity, cpu_online_mask); + bool ret = false; - raw_spin_lock_irq(&desc->lock); - desc->irq_data.chip->irq_set_affinity(&desc->irq_data, - cpumask_of(cpu), true); - raw_spin_unlock_irq(&desc->lock); + if (cpu >= nr_cpu_ids) { + cpu = cpumask_any(cpu_online_mask); + ret = true; + } + + pr_debug("IRQ%u: moving from cpu%u to cpu%u\n", d->irq, d->node, cpu); + + d->chip->irq_set_affinity(d, cpumask_of(cpu), true); + + return ret; } /* @@ -198,25 +205,30 @@ void migrate_irqs(void) { unsigned int i, cpu = smp_processor_id(); struct irq_desc *desc; + unsigned long flags; + + local_irq_save(flags); for_each_irq_desc(i, desc) { struct irq_data *d = &desc->irq_data; + bool affinity_broken = false; - if (d->node == cpu) { - unsigned int newcpu = cpumask_any_and(d->affinity, - cpu_online_mask); - if (newcpu >= nr_cpu_ids) { - if (printk_ratelimit()) - printk(KERN_INFO "IRQ%u no longer affine to CPU%u\n", - i, cpu); + raw_spin_lock(&desc->lock); + do { + if (desc->action == NULL) + break; - cpumask_setall(d->affinity); - newcpu = cpumask_any_and(d->affinity, - cpu_online_mask); - } + if (d->node != cpu) + break; - route_irq(desc, i, newcpu); - } + affinity_broken = migrate_one_irq(d); + } while (0); + raw_spin_unlock(&desc->lock); + + if (affinity_broken && printk_ratelimit()) + pr_warning("IRQ%u no longer affine to CPU%u\n", i, cpu); } + + local_irq_restore(flags); } #endif /* CONFIG_HOTPLUG_CPU */ -- cgit v1.2.3-18-g5258 From c191789c787f488fdb74de0ee55258f71a427704 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 23 Jan 2011 12:12:01 +0000 Subject: ARM: irq migration: update GIC migration code This cleans up after the conversion to irq_data. Rename the function to match the method, and remove the now useless lookup of the irq descriptor which is never used. Move the bitmask calculation out of the irq_controller_lock region. Signed-off-by: Russell King --- arch/arm/common/gic.c | 25 ++++++++++++------------- 1 file changed, 12 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 22437721115..e21c1f4218d 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -142,25 +142,24 @@ static int gic_set_type(struct irq_data *d, unsigned int type) } #ifdef CONFIG_SMP -static int -gic_set_cpu(struct irq_data *d, const struct cpumask *mask_val, bool force) +static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val, + bool force) { void __iomem *reg = gic_dist_base(d) + GIC_DIST_TARGET + (gic_irq(d) & ~3); unsigned int shift = (d->irq % 4) * 8; unsigned int cpu = cpumask_first(mask_val); - u32 val; - struct irq_desc *desc; + u32 val, mask, bit; - spin_lock(&irq_controller_lock); - desc = irq_to_desc(d->irq); - if (desc == NULL) { - spin_unlock(&irq_controller_lock); + if (cpu >= 8) return -EINVAL; - } + + mask = 0xff << shift; + bit = 1 << (cpu + shift); + + spin_lock(&irq_controller_lock); d->node = cpu; - val = readl(reg) & ~(0xff << shift); - val |= 1 << (cpu + shift); - writel(val, reg); + val = readl(reg) & ~mask; + writel(val | bit, reg); spin_unlock(&irq_controller_lock); return 0; @@ -203,7 +202,7 @@ static struct irq_chip gic_chip = { .irq_unmask = gic_unmask_irq, .irq_set_type = gic_set_type, #ifdef CONFIG_SMP - .irq_set_affinity = gic_set_cpu, + .irq_set_affinity = gic_set_affinity, #endif }; -- cgit v1.2.3-18-g5258 From aaa50048f6ce44af66ce0389d4cc6a8348333271 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Tue, 25 Jan 2011 21:35:38 +0100 Subject: ARM: 6639/1: allow highmem on SMP platforms without h/w TLB ops broadcast In commit e616c591405c168f6dc3dfd1221e105adfe49b8d, highmem support was deactivated for SMP platforms without hardware TLB ops broadcast because usage of kmap_high_get() requires that IRQs be disabled when kmap_lock is locked which is incompatible with the IPI mechanism used by the software TLB ops broadcast invoked through flush_all_zero_pkmaps(). The reason for kmap_high_get() is to ensure that the currently kmap'd page usage count does not decrease to zero while we're using its existing virtual mapping in an atomic context. With a VIVT cache this is essential to do due to cache coherency issues, but with a VIPT cache this is only an optimization so not to pay the price of establishing a second mapping if an existing one can be used. However, on VIPT platforms without hardware TLB maintenance we can give up on that optimization in order to be able to use highmem. From ARMv7 onwards the TLB ops are broadcasted in hardware, so let's disable ARCH_NEEDS_KMAP_HIGH_GET only when CONFIG_SMP and CONFIG_CPU_TLB_V6 are defined. Signed-off-by: Nicolas Pitre Tested-by: Saeed Bishara Signed-off-by: Russell King --- arch/arm/include/asm/highmem.h | 29 +++++++++++++++++++++++++++-- arch/arm/mm/mmu.c | 10 ---------- 2 files changed, 27 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/highmem.h b/arch/arm/include/asm/highmem.h index 7080e2c8fa6..a4edd19dd3d 100644 --- a/arch/arm/include/asm/highmem.h +++ b/arch/arm/include/asm/highmem.h @@ -19,11 +19,36 @@ extern pte_t *pkmap_page_table; +extern void *kmap_high(struct page *page); +extern void kunmap_high(struct page *page); + +/* + * The reason for kmap_high_get() is to ensure that the currently kmap'd + * page usage count does not decrease to zero while we're using its + * existing virtual mapping in an atomic context. With a VIVT cache this + * is essential to do, but with a VIPT cache this is only an optimization + * so not to pay the price of establishing a second mapping if an existing + * one can be used. However, on platforms without hardware TLB maintenance + * broadcast, we simply cannot use ARCH_NEEDS_KMAP_HIGH_GET at all since + * the locking involved must also disable IRQs which is incompatible with + * the IPI mechanism used by global TLB operations. + */ #define ARCH_NEEDS_KMAP_HIGH_GET +#if defined(CONFIG_SMP) && defined(CONFIG_CPU_TLB_V6) +#undef ARCH_NEEDS_KMAP_HIGH_GET +#if defined(CONFIG_HIGHMEM) && defined(CONFIG_CPU_CACHE_VIVT) +#error "The sum of features in your kernel config cannot be supported together" +#endif +#endif -extern void *kmap_high(struct page *page); +#ifdef ARCH_NEEDS_KMAP_HIGH_GET extern void *kmap_high_get(struct page *page); -extern void kunmap_high(struct page *page); +#else +static inline void *kmap_high_get(struct page *page) +{ + return NULL; +} +#endif /* * The following functions are already defined by diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 3c67e92f7d5..ff7b43b5885 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -827,16 +827,6 @@ static void __init sanity_check_meminfo(void) * rather difficult. */ reason = "with VIPT aliasing cache"; - } else if (is_smp() && tlb_ops_need_broadcast()) { - /* - * kmap_high needs to occasionally flush TLB entries, - * however, if the TLB entries need to be broadcast - * we may deadlock: - * kmap_high(irqs off)->flush_all_zero_pkmaps-> - * flush_tlb_kernel_range->smp_call_function_many - * (must not be called with irqs off) - */ - reason = "without hardware TLB ops broadcasting"; } if (reason) { printk(KERN_CRIT "HIGHMEM is not supported %s, ignoring high memory\n", -- cgit v1.2.3-18-g5258 From 74c25beeb30fa32badf575a908902cbdef4d4eb4 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 31 Jan 2011 14:43:25 +0000 Subject: ARM: vfp: improve commentry for hotplug events Improve the documentation for the VFP hotplug notifier handler, so that people better understand what's going on there and what has been done for them. Signed-off-by: Russell King --- arch/arm/vfp/vfpmodule.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 25b89d81710..bbf3da012af 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -489,8 +489,11 @@ void vfp_flush_hwstate(struct thread_info *thread) /* * VFP hardware can lose all context when a CPU goes offline. - * Safely clear our held state when a CPU has been killed, and - * re-enable access to VFP when the CPU comes back online. + * As we will be running in SMP mode with CPU hotplug, we will save the + * hardware state at every thread switch. We clear our held state when + * a CPU has been killed, indicating that the VFP hardware doesn't contain + * a threads VFP state. When a CPU starts up, we re-enable access to the + * VFP hardware. * * Both CPU_DYING and CPU_STARTING are called on the CPU which * is being offlined/onlined. -- cgit v1.2.3-18-g5258 From b11fe38883d1de76f2f847943e085a808f83f189 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Sat, 12 Feb 2011 22:25:27 +0100 Subject: ARM: 6663/1: make Thumb2 kernel entry point more similar to the ARM one Some installers would binary patch the kernel zImage to replace the first few nops with custom instructions. This breaks the Thumb2 kernel as the mode switch is right at the beginning. Let's move it towards the end of the nop sequence instead. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/boot/compressed/head.S | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 7193884ed8b..920f4dbd488 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -128,14 +128,14 @@ wait: mrc p14, 0, pc, c0, c1, 0 .arm @ Always enter in ARM state start: .type start,#function - THUMB( adr r12, BSYM(1f) ) - THUMB( bx r12 ) - THUMB( .rept 6 ) - ARM( .rept 8 ) + .rept 7 mov r0, r0 .endr + ARM( mov r0, r0 ) + ARM( b 1f ) + THUMB( adr r12, BSYM(1f) ) + THUMB( bx r12 ) - b 1f .word 0x016f2818 @ Magic numbers to help the loader .word start @ absolute load/run zImage address .word _edata @ zImage end address -- cgit v1.2.3-18-g5258 From 5637a126482026b37d426d76e1b18f748f309aaa Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 14 Feb 2011 15:55:45 +0000 Subject: ARM: move L1_CACHE_SHIFT_6 to mm/Kconfig Move L1_CACHE_SHIFT related options together, rather than spreading them across two separate Kconfig files. Signed-off-by: Russell King --- arch/arm/Kconfig | 5 ----- arch/arm/mm/Kconfig | 5 +++++ 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5cff165b7eb..65ea7bb57c4 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -178,11 +178,6 @@ config FIQ config ARCH_MTD_XIP bool -config ARM_L1_CACHE_SHIFT_6 - bool - help - Setting ARM L1 cache line size to 64 Bytes. - config VECTORS_BASE hex default 0xffff0000 if MMU || CPU_HIGH_VECTOR diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 9d30c6f804b..a51661be141 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -845,6 +845,11 @@ config CACHE_XSC3L2 help This option enables the L2 cache on XScale3. +config ARM_L1_CACHE_SHIFT_6 + bool + help + Setting ARM L1 cache line size to 64 Bytes. + config ARM_L1_CACHE_SHIFT int default 6 if ARM_L1_CACHE_SHIFT_6 -- cgit v1.2.3-18-g5258 From 425fc47adb5bb69f76285be77a09a3341a30799e Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Mon, 14 Feb 2011 14:31:09 +0100 Subject: ARM: 6668/1: ptrace: remove single-step emulation code PTRACE_SINGLESTEP is a ptrace request designed to offer single-stepping support to userspace when the underlying architecture has hardware support for this operation. On ARM, we set arch_has_single_step() to 1 and attempt to emulate hardware single-stepping by disassembling the current instruction to determine the next pc and placing a software breakpoint on that location. Unfortunately this has the following problems: 1.) Only a subset of ARMv7 instructions are supported 2.) Thumb-2 is unsupported 3.) The code is not SMP safe We could try to fix this code, but it turns out that because of the above issues it is rarely used in practice. GDB, for example, uses PTRACE_POKETEXT and PTRACE_PEEKTEXT to manage breakpoints itself and does not require any kernel assistance. This patch removes the single-step emulation code from ptrace meaning that the PTRACE_SINGLESTEP request will return -EIO on ARM. Portable code must check the return value from a ptrace call and handle the failure gracefully. Acked-by: Nicolas Pitre Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/include/asm/processor.h | 12 -- arch/arm/include/asm/ptrace.h | 2 - arch/arm/include/asm/traps.h | 1 + arch/arm/kernel/ptrace.c | 383 +-------------------------------------- arch/arm/kernel/ptrace.h | 37 ---- arch/arm/kernel/signal.c | 9 - arch/arm/kernel/traps.c | 2 +- 7 files changed, 3 insertions(+), 443 deletions(-) delete mode 100644 arch/arm/kernel/ptrace.h (limited to 'arch') diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h index 67357baaeee..b439b41aeac 100644 --- a/arch/arm/include/asm/processor.h +++ b/arch/arm/include/asm/processor.h @@ -29,19 +29,7 @@ #define STACK_TOP_MAX TASK_SIZE #endif -union debug_insn { - u32 arm; - u16 thumb; -}; - -struct debug_entry { - u32 address; - union debug_insn insn; -}; - struct debug_info { - int nsaved; - struct debug_entry bp[2]; #ifdef CONFIG_HAVE_HW_BREAKPOINT struct perf_event *hbp[ARM_MAX_HBP_SLOTS]; #endif diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h index 783d50f3261..a8ff22b2a39 100644 --- a/arch/arm/include/asm/ptrace.h +++ b/arch/arm/include/asm/ptrace.h @@ -130,8 +130,6 @@ struct pt_regs { #ifdef __KERNEL__ -#define arch_has_single_step() (1) - #define user_mode(regs) \ (((regs)->ARM_cpsr & 0xf) == 0) diff --git a/arch/arm/include/asm/traps.h b/arch/arm/include/asm/traps.h index 1b960d5ef6a..f90756dc16d 100644 --- a/arch/arm/include/asm/traps.h +++ b/arch/arm/include/asm/traps.h @@ -45,6 +45,7 @@ static inline int in_exception_text(unsigned long ptr) extern void __init early_trap_init(void); extern void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame); +extern void ptrace_break(struct task_struct *tsk, struct pt_regs *regs); extern void *vectors_page; diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 19c6816db61..eace844511f 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -26,8 +26,6 @@ #include #include -#include "ptrace.h" - #define REG_PC 15 #define REG_PSR 16 /* @@ -184,389 +182,12 @@ put_user_reg(struct task_struct *task, int offset, long data) return ret; } -static inline int -read_u32(struct task_struct *task, unsigned long addr, u32 *res) -{ - int ret; - - ret = access_process_vm(task, addr, res, sizeof(*res), 0); - - return ret == sizeof(*res) ? 0 : -EIO; -} - -static inline int -read_instr(struct task_struct *task, unsigned long addr, u32 *res) -{ - int ret; - - if (addr & 1) { - u16 val; - ret = access_process_vm(task, addr & ~1, &val, sizeof(val), 0); - ret = ret == sizeof(val) ? 0 : -EIO; - *res = val; - } else { - u32 val; - ret = access_process_vm(task, addr & ~3, &val, sizeof(val), 0); - ret = ret == sizeof(val) ? 0 : -EIO; - *res = val; - } - return ret; -} - -/* - * Get value of register `rn' (in the instruction) - */ -static unsigned long -ptrace_getrn(struct task_struct *child, unsigned long insn) -{ - unsigned int reg = (insn >> 16) & 15; - unsigned long val; - - val = get_user_reg(child, reg); - if (reg == 15) - val += 8; - - return val; -} - -/* - * Get value of operand 2 (in an ALU instruction) - */ -static unsigned long -ptrace_getaluop2(struct task_struct *child, unsigned long insn) -{ - unsigned long val; - int shift; - int type; - - if (insn & 1 << 25) { - val = insn & 255; - shift = (insn >> 8) & 15; - type = 3; - } else { - val = get_user_reg (child, insn & 15); - - if (insn & (1 << 4)) - shift = (int)get_user_reg (child, (insn >> 8) & 15); - else - shift = (insn >> 7) & 31; - - type = (insn >> 5) & 3; - } - - switch (type) { - case 0: val <<= shift; break; - case 1: val >>= shift; break; - case 2: - val = (((signed long)val) >> shift); - break; - case 3: - val = (val >> shift) | (val << (32 - shift)); - break; - } - return val; -} - -/* - * Get value of operand 2 (in a LDR instruction) - */ -static unsigned long -ptrace_getldrop2(struct task_struct *child, unsigned long insn) -{ - unsigned long val; - int shift; - int type; - - val = get_user_reg(child, insn & 15); - shift = (insn >> 7) & 31; - type = (insn >> 5) & 3; - - switch (type) { - case 0: val <<= shift; break; - case 1: val >>= shift; break; - case 2: - val = (((signed long)val) >> shift); - break; - case 3: - val = (val >> shift) | (val << (32 - shift)); - break; - } - return val; -} - -#define OP_MASK 0x01e00000 -#define OP_AND 0x00000000 -#define OP_EOR 0x00200000 -#define OP_SUB 0x00400000 -#define OP_RSB 0x00600000 -#define OP_ADD 0x00800000 -#define OP_ADC 0x00a00000 -#define OP_SBC 0x00c00000 -#define OP_RSC 0x00e00000 -#define OP_ORR 0x01800000 -#define OP_MOV 0x01a00000 -#define OP_BIC 0x01c00000 -#define OP_MVN 0x01e00000 - -static unsigned long -get_branch_address(struct task_struct *child, unsigned long pc, unsigned long insn) -{ - u32 alt = 0; - - switch (insn & 0x0e000000) { - case 0x00000000: - case 0x02000000: { - /* - * data processing - */ - long aluop1, aluop2, ccbit; - - if ((insn & 0x0fffffd0) == 0x012fff10) { - /* - * bx or blx - */ - alt = get_user_reg(child, insn & 15); - break; - } - - - if ((insn & 0xf000) != 0xf000) - break; - - aluop1 = ptrace_getrn(child, insn); - aluop2 = ptrace_getaluop2(child, insn); - ccbit = get_user_reg(child, REG_PSR) & PSR_C_BIT ? 1 : 0; - - switch (insn & OP_MASK) { - case OP_AND: alt = aluop1 & aluop2; break; - case OP_EOR: alt = aluop1 ^ aluop2; break; - case OP_SUB: alt = aluop1 - aluop2; break; - case OP_RSB: alt = aluop2 - aluop1; break; - case OP_ADD: alt = aluop1 + aluop2; break; - case OP_ADC: alt = aluop1 + aluop2 + ccbit; break; - case OP_SBC: alt = aluop1 - aluop2 + ccbit; break; - case OP_RSC: alt = aluop2 - aluop1 + ccbit; break; - case OP_ORR: alt = aluop1 | aluop2; break; - case OP_MOV: alt = aluop2; break; - case OP_BIC: alt = aluop1 & ~aluop2; break; - case OP_MVN: alt = ~aluop2; break; - } - break; - } - - case 0x04000000: - case 0x06000000: - /* - * ldr - */ - if ((insn & 0x0010f000) == 0x0010f000) { - unsigned long base; - - base = ptrace_getrn(child, insn); - if (insn & 1 << 24) { - long aluop2; - - if (insn & 0x02000000) - aluop2 = ptrace_getldrop2(child, insn); - else - aluop2 = insn & 0xfff; - - if (insn & 1 << 23) - base += aluop2; - else - base -= aluop2; - } - read_u32(child, base, &alt); - } - break; - - case 0x08000000: - /* - * ldm - */ - if ((insn & 0x00108000) == 0x00108000) { - unsigned long base; - unsigned int nr_regs; - - if (insn & (1 << 23)) { - nr_regs = hweight16(insn & 65535) << 2; - - if (!(insn & (1 << 24))) - nr_regs -= 4; - } else { - if (insn & (1 << 24)) - nr_regs = -4; - else - nr_regs = 0; - } - - base = ptrace_getrn(child, insn); - - read_u32(child, base + nr_regs, &alt); - break; - } - break; - - case 0x0a000000: { - /* - * bl or b - */ - signed long displ; - /* It's a branch/branch link: instead of trying to - * figure out whether the branch will be taken or not, - * we'll put a breakpoint at both locations. This is - * simpler, more reliable, and probably not a whole lot - * slower than the alternative approach of emulating the - * branch. - */ - displ = (insn & 0x00ffffff) << 8; - displ = (displ >> 6) + 8; - if (displ != 0 && displ != 4) - alt = pc + displ; - } - break; - } - - return alt; -} - -static int -swap_insn(struct task_struct *task, unsigned long addr, - void *old_insn, void *new_insn, int size) -{ - int ret; - - ret = access_process_vm(task, addr, old_insn, size, 0); - if (ret == size) - ret = access_process_vm(task, addr, new_insn, size, 1); - return ret; -} - -static void -add_breakpoint(struct task_struct *task, struct debug_info *dbg, unsigned long addr) -{ - int nr = dbg->nsaved; - - if (nr < 2) { - u32 new_insn = BREAKINST_ARM; - int res; - - res = swap_insn(task, addr, &dbg->bp[nr].insn, &new_insn, 4); - - if (res == 4) { - dbg->bp[nr].address = addr; - dbg->nsaved += 1; - } - } else - printk(KERN_ERR "ptrace: too many breakpoints\n"); -} - -/* - * Clear one breakpoint in the user program. We copy what the hardware - * does and use bit 0 of the address to indicate whether this is a Thumb - * breakpoint or an ARM breakpoint. - */ -static void clear_breakpoint(struct task_struct *task, struct debug_entry *bp) -{ - unsigned long addr = bp->address; - union debug_insn old_insn; - int ret; - - if (addr & 1) { - ret = swap_insn(task, addr & ~1, &old_insn.thumb, - &bp->insn.thumb, 2); - - if (ret != 2 || old_insn.thumb != BREAKINST_THUMB) - printk(KERN_ERR "%s:%d: corrupted Thumb breakpoint at " - "0x%08lx (0x%04x)\n", task->comm, - task_pid_nr(task), addr, old_insn.thumb); - } else { - ret = swap_insn(task, addr & ~3, &old_insn.arm, - &bp->insn.arm, 4); - - if (ret != 4 || old_insn.arm != BREAKINST_ARM) - printk(KERN_ERR "%s:%d: corrupted ARM breakpoint at " - "0x%08lx (0x%08x)\n", task->comm, - task_pid_nr(task), addr, old_insn.arm); - } -} - -void ptrace_set_bpt(struct task_struct *child) -{ - struct pt_regs *regs; - unsigned long pc; - u32 insn; - int res; - - regs = task_pt_regs(child); - pc = instruction_pointer(regs); - - if (thumb_mode(regs)) { - printk(KERN_WARNING "ptrace: can't handle thumb mode\n"); - return; - } - - res = read_instr(child, pc, &insn); - if (!res) { - struct debug_info *dbg = &child->thread.debug; - unsigned long alt; - - dbg->nsaved = 0; - - alt = get_branch_address(child, pc, insn); - if (alt) - add_breakpoint(child, dbg, alt); - - /* - * Note that we ignore the result of setting the above - * breakpoint since it may fail. When it does, this is - * not so much an error, but a forewarning that we may - * be receiving a prefetch abort shortly. - * - * If we don't set this breakpoint here, then we can - * lose control of the thread during single stepping. - */ - if (!alt || predicate(insn) != PREDICATE_ALWAYS) - add_breakpoint(child, dbg, pc + 4); - } -} - -/* - * Ensure no single-step breakpoint is pending. Returns non-zero - * value if child was being single-stepped. - */ -void ptrace_cancel_bpt(struct task_struct *child) -{ - int i, nsaved = child->thread.debug.nsaved; - - child->thread.debug.nsaved = 0; - - if (nsaved > 2) { - printk("ptrace_cancel_bpt: bogus nsaved: %d!\n", nsaved); - nsaved = 2; - } - - for (i = 0; i < nsaved; i++) - clear_breakpoint(child, &child->thread.debug.bp[i]); -} - -void user_disable_single_step(struct task_struct *task) -{ - task->ptrace &= ~PT_SINGLESTEP; - ptrace_cancel_bpt(task); -} - -void user_enable_single_step(struct task_struct *task) -{ - task->ptrace |= PT_SINGLESTEP; -} - /* * Called by kernel/ptrace.c when detaching.. */ void ptrace_disable(struct task_struct *child) { - user_disable_single_step(child); + /* Nothing to do. */ } /* @@ -576,8 +197,6 @@ void ptrace_break(struct task_struct *tsk, struct pt_regs *regs) { siginfo_t info; - ptrace_cancel_bpt(tsk); - info.si_signo = SIGTRAP; info.si_errno = 0; info.si_code = TRAP_BRKPT; diff --git a/arch/arm/kernel/ptrace.h b/arch/arm/kernel/ptrace.h deleted file mode 100644 index 3926605b82e..00000000000 --- a/arch/arm/kernel/ptrace.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * linux/arch/arm/kernel/ptrace.h - * - * Copyright (C) 2000-2003 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include - -extern void ptrace_cancel_bpt(struct task_struct *); -extern void ptrace_set_bpt(struct task_struct *); -extern void ptrace_break(struct task_struct *, struct pt_regs *); - -/* - * Send SIGTRAP if we're single-stepping - */ -static inline void single_step_trap(struct task_struct *task) -{ - if (task->ptrace & PT_SINGLESTEP) { - ptrace_cancel_bpt(task); - send_sig(SIGTRAP, task, 1); - } -} - -static inline void single_step_clear(struct task_struct *task) -{ - if (task->ptrace & PT_SINGLESTEP) - ptrace_cancel_bpt(task); -} - -static inline void single_step_set(struct task_struct *task) -{ - if (task->ptrace & PT_SINGLESTEP) - ptrace_set_bpt(task); -} diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 907d5a620bc..7709668c484 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -20,7 +20,6 @@ #include #include -#include "ptrace.h" #include "signal.h" #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) @@ -348,8 +347,6 @@ asmlinkage int sys_sigreturn(struct pt_regs *regs) if (restore_sigframe(regs, frame)) goto badframe; - single_step_trap(current); - return regs->ARM_r0; badframe: @@ -383,8 +380,6 @@ asmlinkage int sys_rt_sigreturn(struct pt_regs *regs) if (do_sigaltstack(&frame->sig.uc.uc_stack, NULL, regs->ARM_sp) == -EFAULT) goto badframe; - single_step_trap(current); - return regs->ARM_r0; badframe: @@ -704,8 +699,6 @@ static void do_signal(struct pt_regs *regs, int syscall) if (try_to_freeze()) goto no_signal; - single_step_clear(current); - signr = get_signal_to_deliver(&info, &ka, regs, NULL); if (signr > 0) { sigset_t *oldset; @@ -724,7 +717,6 @@ static void do_signal(struct pt_regs *regs, int syscall) if (test_thread_flag(TIF_RESTORE_SIGMASK)) clear_thread_flag(TIF_RESTORE_SIGMASK); } - single_step_set(current); return; } @@ -770,7 +762,6 @@ static void do_signal(struct pt_regs *regs, int syscall) sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); } } - single_step_set(current); } asmlinkage void diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 7f53c3651c5..21ac43f1c2d 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include @@ -32,7 +33,6 @@ #include #include -#include "ptrace.h" #include "signal.h" static const char *handler[]= { "prefetch abort", "data abort", "address exception", "interrupt" }; -- cgit v1.2.3-18-g5258 From 6d7d0ae51574943bf571d269da3243257a2d15db Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Mon, 21 Feb 2011 07:06:45 +0100 Subject: ARM: 6750/1: improvements to compressed/head.S In the case of a conflict between the memory used by the compressed kernel with its decompressor code and the memory used for the decompressed kernel, we currently store the later after the former and relocate it afterwards. This would be more efficient to do this the other way around i.e. relocate the compressed data up front instead, resulting in a smaller copy. That also has the advantage of making the code smaller and more straight forward. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/boot/compressed/head.S | 239 ++++++++++++++++++---------------------- 1 file changed, 110 insertions(+), 129 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 920f4dbd488..39859216af0 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -174,9 +174,7 @@ not_angel: */ .text - adr r0, LC0 - ldmia r0, {r1, r2, r3, r5, r6, r11, ip} - ldr sp, [r0, #28] + #ifdef CONFIG_AUTO_ZRELADDR @ determine final kernel image address mov r4, pc @@ -185,35 +183,108 @@ not_angel: #else ldr r4, =zreladdr #endif - subs r0, r0, r1 @ calculate the delta offset - @ if delta is zero, we are - beq not_relocated @ running at the address we - @ were linked at. + bl cache_on + +restart: adr r0, LC0 + ldmia r0, {r1, r2, r3, r5, r6, r9, r11, r12} + ldr sp, [r0, #32] + + /* + * We might be running at a different address. We need + * to fix up various pointers. + */ + sub r0, r0, r1 @ calculate the delta offset + add r5, r5, r0 @ _start + add r6, r6, r0 @ _edata +#ifndef CONFIG_ZBOOT_ROM + /* malloc space is above the relocated stack (64k max) */ + add sp, sp, r0 + add r10, sp, #0x10000 +#else /* - * We're running at a different address. We need to fix - * up various pointers: - * r5 - zImage base address (_start) - * r6 - size of decompressed image - * r11 - GOT start - * ip - GOT end + * With ZBOOT_ROM the bss/stack is non relocatable, + * but someone could still run this code from RAM, + * in which case our reference is _edata. */ - add r5, r5, r0 + mov r10, r6 +#endif + +/* + * Check to see if we will overwrite ourselves. + * r4 = final kernel address + * r5 = start of this image + * r9 = size of decompressed image + * r10 = end of this image, including bss/stack/malloc space if non XIP + * We basically want: + * r4 >= r10 -> OK + * r4 + image length <= r5 -> OK + */ + cmp r4, r10 + bhs wont_overwrite + add r10, r4, r9 + cmp r10, r5 + bls wont_overwrite + +/* + * Relocate ourselves past the end of the decompressed kernel. + * r5 = start of this image + * r6 = _edata + * r10 = end of the decompressed kernel + * Because we always copy ahead, we need to do it from the end and go + * backward in case the source and destination overlap. + */ + /* Round up to next 256-byte boundary. */ + add r10, r10, #256 + bic r10, r10, #255 + + sub r9, r6, r5 @ size to copy + add r9, r9, #31 @ rounded up to a multiple + bic r9, r9, #31 @ ... of 32 bytes + add r6, r9, r5 + add r9, r9, r10 + +1: ldmdb r6!, {r0 - r3, r10 - r12, lr} + cmp r6, r5 + stmdb r9!, {r0 - r3, r10 - r12, lr} + bhi 1b + + /* Preserve offset to relocated code. */ + sub r6, r9, r6 + + bl cache_clean_flush + + adr r0, BSYM(restart) + add r0, r0, r6 + mov pc, r0 + +wont_overwrite: +/* + * If delta is zero, we are running at the address we were linked at. + * r0 = delta + * r2 = BSS start + * r3 = BSS end + * r4 = kernel execution address + * r7 = architecture ID + * r8 = atags pointer + * r11 = GOT start + * r12 = GOT end + * sp = stack pointer + */ + teq r0, #0 + beq not_relocated add r11, r11, r0 - add ip, ip, r0 + add r12, r12, r0 #ifndef CONFIG_ZBOOT_ROM /* * If we're running fully PIC === CONFIG_ZBOOT_ROM = n, * we need to fix up pointers into the BSS region. - * r2 - BSS start - * r3 - BSS end - * sp - stack pointer + * Note that the stack pointer has already been fixed up. */ add r2, r2, r0 add r3, r3, r0 - add sp, sp, r0 /* * Relocate all entries in the GOT table. @@ -221,7 +292,7 @@ not_angel: 1: ldr r1, [r11, #0] @ relocate entries in the GOT add r1, r1, r0 @ table. This fixes up the str r1, [r11], #4 @ C references. - cmp r11, ip + cmp r11, r12 blo 1b #else @@ -234,7 +305,7 @@ not_angel: cmphs r3, r1 @ _end < entry addlo r1, r1, r0 @ table. This fixes up the str r1, [r11], #4 @ C references. - cmp r11, ip + cmp r11, r12 blo 1b #endif @@ -246,76 +317,24 @@ not_relocated: mov r0, #0 cmp r2, r3 blo 1b - /* - * The C runtime environment should now be setup - * sufficiently. Turn the cache on, set up some - * pointers, and start decompressing. - */ - bl cache_on - - mov r1, sp @ malloc space above stack - add r2, sp, #0x10000 @ 64k max - /* - * Check to see if we will overwrite ourselves. - * r4 = final kernel address - * r5 = start of this image - * r6 = size of decompressed image - * r2 = end of malloc space (and therefore this image) - * We basically want: - * r4 >= r2 -> OK - * r4 + image length <= r5 -> OK + * The C runtime environment should now be setup sufficiently. + * Set up some pointers, and start decompressing. + * r4 = kernel execution address + * r7 = architecture ID + * r8 = atags pointer */ - cmp r4, r2 - bhs wont_overwrite - add r0, r4, r6 - cmp r0, r5 - bls wont_overwrite - - mov r5, r2 @ decompress after malloc space - mov r0, r5 + mov r0, r4 + mov r1, sp @ malloc space above stack + add r2, sp, #0x10000 @ 64k max mov r3, r7 bl decompress_kernel - - add r0, r0, #127 + 128 @ alignment + stack - bic r0, r0, #127 @ align the kernel length -/* - * r0 = decompressed kernel length - * r1-r3 = unused - * r4 = kernel execution address - * r5 = decompressed kernel start - * r7 = architecture ID - * r8 = atags pointer - * r9-r12,r14 = corrupted - */ - add r1, r5, r0 @ end of decompressed kernel - adr r2, reloc_start - ldr r3, LC1 - add r3, r2, r3 -1: ldmia r2!, {r9 - r12, r14} @ copy relocation code - stmia r1!, {r9 - r12, r14} - ldmia r2!, {r9 - r12, r14} - stmia r1!, {r9 - r12, r14} - cmp r2, r3 - blo 1b - mov sp, r1 - add sp, sp, #128 @ relocate the stack - bl cache_clean_flush - ARM( add pc, r5, r0 ) @ call relocation code - THUMB( add r12, r5, r0 ) - THUMB( mov pc, r12 ) @ call relocation code - -/* - * We're not in danger of overwriting ourselves. Do this the simple way. - * - * r4 = kernel execution address - * r7 = architecture ID - */ -wont_overwrite: mov r0, r4 - mov r3, r7 - bl decompress_kernel - b call_kernel + bl cache_off + mov r0, #0 @ must be zero + mov r1, r7 @ restore architecture number + mov r2, r8 @ restore atags pointer + mov pc, r4 @ call kernel .align 2 .type LC0, #object @@ -323,11 +342,11 @@ LC0: .word LC0 @ r1 .word __bss_start @ r2 .word _end @ r3 .word _start @ r5 - .word _image_size @ r6 + .word _edata @ r6 + .word _image_size @ r9 .word _got_start @ r11 .word _got_end @ ip .word user_stack_end @ sp -LC1: .word reloc_end - reloc_start .size LC0, . - LC0 #ifdef CONFIG_ARCH_RPC @@ -353,7 +372,7 @@ params: ldr r0, =0x10000100 @ params_phys for RPC * On exit, * r0, r1, r2, r3, r9, r10, r12 corrupted * This routine must preserve: - * r4, r5, r6, r7, r8 + * r4, r7, r8 */ .align 5 cache_on: mov r3, #8 @ cache_on function @@ -550,43 +569,6 @@ __common_mmu_cache_on: sub pc, lr, r0, lsr #32 @ properly flush pipeline #endif -/* - * All code following this line is relocatable. It is relocated by - * the above code to the end of the decompressed kernel image and - * executed there. During this time, we have no stacks. - * - * r0 = decompressed kernel length - * r1-r3 = unused - * r4 = kernel execution address - * r5 = decompressed kernel start - * r7 = architecture ID - * r8 = atags pointer - * r9-r12,r14 = corrupted - */ - .align 5 -reloc_start: add r9, r5, r0 - sub r9, r9, #128 @ do not copy the stack - debug_reloc_start - mov r1, r4 -1: - .rept 4 - ldmia r5!, {r0, r2, r3, r10 - r12, r14} @ relocate kernel - stmia r1!, {r0, r2, r3, r10 - r12, r14} - .endr - - cmp r5, r9 - blo 1b - mov sp, r1 - add sp, sp, #128 @ relocate the stack - debug_reloc_end - -call_kernel: bl cache_clean_flush - bl cache_off - mov r0, #0 @ must be zero - mov r1, r7 @ restore architecture number - mov r2, r8 @ restore atags pointer - mov pc, r4 @ call kernel - /* * Here follow the relocatable cache support functions for the * various processors. This is a generic hook for locating an @@ -791,7 +773,7 @@ proc_types: * On exit, * r0, r1, r2, r3, r9, r12 corrupted * This routine must preserve: - * r4, r6, r7 + * r4, r7, r8 */ .align 5 cache_off: mov r3, #12 @ cache_off function @@ -866,7 +848,7 @@ __armv3_mmu_cache_off: * On exit, * r1, r2, r3, r9, r10, r11, r12 corrupted * This routine must preserve: - * r0, r4, r5, r6, r7 + * r4, r6, r7, r8 */ .align 5 cache_clean_flush: @@ -1088,7 +1070,6 @@ memdump: mov r12, r0 #endif .ltorg -reloc_end: .align .section ".stack", "aw", %nobits -- cgit v1.2.3-18-g5258 From af90f10d3826525306c96d423df240210640cb72 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Wed, 23 Feb 2011 18:53:15 +0100 Subject: ARM: 6759/1: smp: Select local timers vs broadcast timer support runtime The current code support of dummy timers in absence of local timer is compile time. This is an attempt to convert it to runtime so that on few SOC version if the local timers aren't supported kernel can switch to dummy timers. OMAP4430 ES1.0 does suffer from this limitation. This patch should not have any functional impact on affected files. Cc: Daniel Walker Cc: Bryan Huntsman Cc: Tony Lindgren Cc: Kukjin Kim Cc: Paul Mundt Cc: Magnus Damm Cc: Colin Cross Cc: Erik Gilling Cc: Srinidhi Kasagar Cc: Linus Walleij Signed-off-by: Santosh Shilimkar Acked-by: David Brown Signed-off-by: Russell King --- arch/arm/include/asm/localtimer.h | 8 +++++++- arch/arm/kernel/smp.c | 7 +++---- arch/arm/mach-msm/timer.c | 3 ++- arch/arm/mach-omap2/timer-mpu.c | 3 ++- arch/arm/mach-s5pv310/localtimer.c | 3 ++- arch/arm/mach-shmobile/localtimer.c | 3 ++- arch/arm/mach-tegra/localtimer.c | 3 ++- arch/arm/mach-ux500/localtimer.c | 3 ++- arch/arm/plat-versatile/localtimer.c | 3 ++- 9 files changed, 24 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/localtimer.h b/arch/arm/include/asm/localtimer.h index 6bc63ab498c..080d74f8128 100644 --- a/arch/arm/include/asm/localtimer.h +++ b/arch/arm/include/asm/localtimer.h @@ -44,8 +44,14 @@ int local_timer_ack(void); /* * Setup a local timer interrupt for a CPU. */ -void local_timer_setup(struct clock_event_device *); +int local_timer_setup(struct clock_event_device *); +#else + +static inline int local_timer_setup(struct clock_event_device *evt) +{ + return -ENXIO; +} #endif #endif diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 4539ebcb089..8fe05ad932e 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -474,13 +474,12 @@ static void smp_timer_broadcast(const struct cpumask *mask) #define smp_timer_broadcast NULL #endif -#ifndef CONFIG_LOCAL_TIMERS static void broadcast_timer_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) { } -static void local_timer_setup(struct clock_event_device *evt) +static void broadcast_timer_setup(struct clock_event_device *evt) { evt->name = "dummy_timer"; evt->features = CLOCK_EVT_FEAT_ONESHOT | @@ -492,7 +491,6 @@ static void local_timer_setup(struct clock_event_device *evt) clockevents_register_device(evt); } -#endif void __cpuinit percpu_timer_setup(void) { @@ -502,7 +500,8 @@ void __cpuinit percpu_timer_setup(void) evt->cpumask = cpumask_of(cpu); evt->broadcast = smp_timer_broadcast; - local_timer_setup(evt); + if (local_timer_setup(evt)) + broadcast_timer_setup(evt); } #ifdef CONFIG_HOTPLUG_CPU diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index c105d28b53e..ae85aa95180 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -255,7 +255,7 @@ static void __init msm_timer_init(void) } #ifdef CONFIG_SMP -void __cpuinit local_timer_setup(struct clock_event_device *evt) +int __cpuinit local_timer_setup(struct clock_event_device *evt) { struct msm_clock *clock = &msm_clocks[MSM_GLOBAL_TIMER]; @@ -287,6 +287,7 @@ void __cpuinit local_timer_setup(struct clock_event_device *evt) gic_enable_ppi(clock->irq.irq); clockevents_register_device(evt); + return 0; } inline int local_timer_ack(void) diff --git a/arch/arm/mach-omap2/timer-mpu.c b/arch/arm/mach-omap2/timer-mpu.c index 954682e6439..09c73dcfc2a 100644 --- a/arch/arm/mach-omap2/timer-mpu.c +++ b/arch/arm/mach-omap2/timer-mpu.c @@ -26,9 +26,10 @@ /* * Setup the local clock events for a CPU. */ -void __cpuinit local_timer_setup(struct clock_event_device *evt) +int __cpuinit local_timer_setup(struct clock_event_device *evt) { evt->irq = OMAP44XX_IRQ_LOCALTIMER; twd_timer_setup(evt); + return 0; } diff --git a/arch/arm/mach-s5pv310/localtimer.c b/arch/arm/mach-s5pv310/localtimer.c index 2784036cd8b..8239c6a684a 100644 --- a/arch/arm/mach-s5pv310/localtimer.c +++ b/arch/arm/mach-s5pv310/localtimer.c @@ -18,8 +18,9 @@ /* * Setup the local clock events for a CPU. */ -void __cpuinit local_timer_setup(struct clock_event_device *evt) +int __cpuinit local_timer_setup(struct clock_event_device *evt) { evt->irq = IRQ_LOCALTIMER; twd_timer_setup(evt); + return 0; } diff --git a/arch/arm/mach-shmobile/localtimer.c b/arch/arm/mach-shmobile/localtimer.c index 2111c28b724..ad9ccc9900c 100644 --- a/arch/arm/mach-shmobile/localtimer.c +++ b/arch/arm/mach-shmobile/localtimer.c @@ -18,8 +18,9 @@ /* * Setup the local clock events for a CPU. */ -void __cpuinit local_timer_setup(struct clock_event_device *evt) +int __cpuinit local_timer_setup(struct clock_event_device *evt) { evt->irq = 29; twd_timer_setup(evt); + return 0; } diff --git a/arch/arm/mach-tegra/localtimer.c b/arch/arm/mach-tegra/localtimer.c index f81ca7cbbc1..e91d681d45a 100644 --- a/arch/arm/mach-tegra/localtimer.c +++ b/arch/arm/mach-tegra/localtimer.c @@ -18,8 +18,9 @@ /* * Setup the local clock events for a CPU. */ -void __cpuinit local_timer_setup(struct clock_event_device *evt) +int __cpuinit local_timer_setup(struct clock_event_device *evt) { evt->irq = IRQ_LOCALTIMER; twd_timer_setup(evt); + return 0; } diff --git a/arch/arm/mach-ux500/localtimer.c b/arch/arm/mach-ux500/localtimer.c index 2288f6a7c51..5ba113309a0 100644 --- a/arch/arm/mach-ux500/localtimer.c +++ b/arch/arm/mach-ux500/localtimer.c @@ -21,8 +21,9 @@ /* * Setup the local clock events for a CPU. */ -void __cpuinit local_timer_setup(struct clock_event_device *evt) +int __cpuinit local_timer_setup(struct clock_event_device *evt) { evt->irq = IRQ_LOCALTIMER; twd_timer_setup(evt); + return 0; } diff --git a/arch/arm/plat-versatile/localtimer.c b/arch/arm/plat-versatile/localtimer.c index 83ebee56933..0fb3961999b 100644 --- a/arch/arm/plat-versatile/localtimer.c +++ b/arch/arm/plat-versatile/localtimer.c @@ -19,8 +19,9 @@ /* * Setup the local clock events for a CPU. */ -void __cpuinit local_timer_setup(struct clock_event_device *evt) +int __cpuinit local_timer_setup(struct clock_event_device *evt) { evt->irq = IRQ_LOCALTIMER; twd_timer_setup(evt); + return 0; } -- cgit v1.2.3-18-g5258 From 07787a85c0c664d434b522c8bdf7cdc636a16e75 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Tue, 22 Feb 2011 09:57:47 +0100 Subject: ARM: 6753/1: omap4: Enable ARM local timers with OMAP4430 es1.0 exception On OMAP4430 ES1.0 the local timers are gated by security. Enable the CONFIG_LOCAL_TIMERS for omap2plus build and handle the OMAP4430 es1.0 exception case. This patch has dependency on the first patch in this series. ARM: smp: Select local timers vs dummy timer support runtime Signed-off-by: Santosh Shilimkar Acked-by: Tony Lindgren Signed-off-by: Russell King --- arch/arm/mach-omap2/Kconfig | 1 + arch/arm/mach-omap2/timer-mpu.c | 4 ++++ 2 files changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 1a2cf6226a5..ec55fd830f6 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -44,6 +44,7 @@ config ARCH_OMAP4 depends on ARCH_OMAP2PLUS select CPU_V7 select ARM_GIC + select LOCAL_TIMERS if SMP select PL310_ERRATA_588369 select ARM_ERRATA_720789 select ARCH_HAS_OPP diff --git a/arch/arm/mach-omap2/timer-mpu.c b/arch/arm/mach-omap2/timer-mpu.c index 09c73dcfc2a..31c0ac4cd66 100644 --- a/arch/arm/mach-omap2/timer-mpu.c +++ b/arch/arm/mach-omap2/timer-mpu.c @@ -28,6 +28,10 @@ */ int __cpuinit local_timer_setup(struct clock_event_device *evt) { + /* Local timers are not supprted on OMAP4430 ES1.0 */ + if (omap_rev() == OMAP4430_REV_ES1_0) + return -ENXIO; + evt->irq = OMAP44XX_IRQ_LOCALTIMER; twd_timer_setup(evt); return 0; -- cgit v1.2.3-18-g5258 From 710dcda64369e3f3704a0eee502ce27dbf9fedc1 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 23 Feb 2011 17:47:41 +0100 Subject: x86: ioapic: Implement and use io_apic_setup_irq_pin_once() io_apic_set_pci_routing() and mp_save_irq() check the pin_programmed bit before calling io_apic_setup_irq_pin() and set the bit when the pin was setup. Move that duplicated code into a separate function and use it. Signed-off-by: Thomas Gleixner --- arch/x86/kernel/apic/io_apic.c | 57 ++++++++++++++++++------------------------ 1 file changed, 25 insertions(+), 32 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 2d49e4b41c2..46913ef88ea 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -128,6 +128,9 @@ static int __init parse_noapic(char *str) } early_param("noapic", parse_noapic); +static int io_apic_setup_irq_pin_once(unsigned int irq, int node, + struct io_apic_irq_attr *attr); + /* Will be called in mpparse/acpi/sfi codes for saving IRQ info */ void mp_save_irq(struct mpc_intsrc *m) { @@ -1457,17 +1460,10 @@ void setup_IO_APIC_irq_extra(u32 gsi) if (apic_id == 0 || irq < NR_IRQS_LEGACY) return; - if (test_bit(pin, mp_ioapic_routing[apic_id].pin_programmed)) { - pr_debug("Pin %d-%d already programmed\n", - mp_ioapics[apic_id].apicid, pin); - return; - } - set_io_apic_irq_attr(&attr, apic_id, pin, irq_trigger(idx), irq_polarity(idx)); - if (!io_apic_setup_irq_pin(irq, node, &attr)) - set_bit(pin, mp_ioapic_routing[apic_id].pin_programmed); + io_apic_setup_irq_pin_once(irq, node, &attr); } /* @@ -3601,6 +3597,24 @@ io_apic_setup_irq_pin(unsigned int irq, int node, struct io_apic_irq_attr *attr) return ret; } +static int io_apic_setup_irq_pin_once(unsigned int irq, int node, + struct io_apic_irq_attr *attr) +{ + unsigned int id = attr->ioapic, pin = attr->ioapic_pin; + int ret; + + /* Avoid redundant programming */ + if (test_bit(pin, mp_ioapic_routing[id].pin_programmed)) { + pr_debug("Pin %d-%d already programmed\n", + mp_ioapics[id].apicid, pin); + return 0; + } + ret = io_apic_setup_irq_pin(irq, node, attr); + if (!ret) + set_bit(pin, mp_ioapic_routing[id].pin_programmed); + return ret; +} + static int __init io_apic_get_redir_entries(int ioapic) { union IO_APIC_reg_01 reg_01; @@ -3655,8 +3669,8 @@ int __init arch_probe_nr_irqs(void) } #endif -static int __io_apic_set_pci_routing(struct device *dev, int irq, - struct io_apic_irq_attr *irq_attr) +int io_apic_set_pci_routing(struct device *dev, int irq, + struct io_apic_irq_attr *irq_attr) { int node; @@ -3668,28 +3682,7 @@ static int __io_apic_set_pci_routing(struct device *dev, int irq, node = dev ? dev_to_node(dev) : cpu_to_node(0); - return io_apic_setup_irq_pin(irq, node, irq_attr); -} - -int io_apic_set_pci_routing(struct device *dev, int irq, - struct io_apic_irq_attr *irq_attr) -{ - int ioapic, pin; - /* - * Avoid pin reprogramming. PRTs typically include entries - * with redundant pin->gsi mappings (but unique PCI devices); - * we only program the IOAPIC on the first. - */ - ioapic = irq_attr->ioapic; - pin = irq_attr->ioapic_pin; - if (test_bit(pin, mp_ioapic_routing[ioapic].pin_programmed)) { - pr_debug("Pin %d-%d already programmed\n", - mp_ioapics[ioapic].apicid, pin); - return 0; - } - set_bit(pin, mp_ioapic_routing[ioapic].pin_programmed); - - return __io_apic_set_pci_routing(dev, irq, irq_attr); + return io_apic_setup_irq_pin_once(irq, node, irq_attr); } #ifdef CONFIG_X86_32 -- cgit v1.2.3-18-g5258 From abb0052289e58140d933b29491f59e4be0a19727 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 23 Feb 2011 19:54:53 +0100 Subject: x86: ioapic: Move trigger defines to io_apic.h Required for devicetree based io_apic configuration. Signed-off-by: Thomas Gleixner --- arch/x86/include/asm/io_apic.h | 4 ++++ arch/x86/kernel/apic/io_apic.c | 4 ---- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h index be61e22dd9e..c4bd267dfc5 100644 --- a/arch/x86/include/asm/io_apic.h +++ b/arch/x86/include/asm/io_apic.h @@ -95,6 +95,10 @@ struct IR_IO_APIC_route_entry { index : 15; } __attribute__ ((packed)); +#define IOAPIC_AUTO -1 +#define IOAPIC_EDGE 0 +#define IOAPIC_LEVEL 1 + #ifdef CONFIG_X86_IO_APIC /* diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 46913ef88ea..8d23e831a45 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -1216,10 +1216,6 @@ void __setup_vector_irq(int cpu) static struct irq_chip ioapic_chip; static struct irq_chip ir_ioapic_chip; -#define IOAPIC_AUTO -1 -#define IOAPIC_EDGE 0 -#define IOAPIC_LEVEL 1 - #ifdef CONFIG_X86_32 static inline int IO_APIC_irq_trigger(int irq) { -- cgit v1.2.3-18-g5258 From 342d87ef21cef81b5af973c52bc1ab4e70c8b877 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 25 Jan 2011 18:31:12 +0100 Subject: tile: Fix __pte_free_tlb Tile's __pte_free_tlb() implementation makes assumptions about the generic mmu_gather implementation, cure this ;-) Signed-off-by: Peter Zijlstra Signed-off-by: Chris Metcalf --- arch/tile/mm/pgtable.c | 15 ++------------- 1 file changed, 2 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/tile/mm/pgtable.c b/arch/tile/mm/pgtable.c index 1f5430c53d0..2c850d9864e 100644 --- a/arch/tile/mm/pgtable.c +++ b/arch/tile/mm/pgtable.c @@ -252,19 +252,8 @@ void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte, int i; pgtable_page_dtor(pte); - tlb->need_flush = 1; - if (tlb_fast_mode(tlb)) { - struct page *pte_pages[L2_USER_PGTABLE_PAGES]; - for (i = 0; i < L2_USER_PGTABLE_PAGES; ++i) - pte_pages[i] = pte + i; - free_pages_and_swap_cache(pte_pages, L2_USER_PGTABLE_PAGES); - return; - } - for (i = 0; i < L2_USER_PGTABLE_PAGES; ++i) { - tlb->pages[tlb->nr++] = pte + i; - if (tlb->nr >= FREE_PTE_NR) - tlb_flush_mmu(tlb, 0, 0); - } + for (i = 0; i < L2_USER_PGTABLE_PAGES; ++i) + tlb_remove_page(tlb, pte + i); } #ifndef __tilegx__ -- cgit v1.2.3-18-g5258 From f5b42c93d891cc9e6528b4e1ab11160ce670e67d Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 6 Feb 2011 23:04:40 +0000 Subject: tile: Convert irq_chip to new functions Signed-off-by: Thomas Gleixner Signed-off-by: Chris Metcalf --- arch/tile/kernel/irq.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/tile/kernel/irq.c b/arch/tile/kernel/irq.c index 128805ef8f2..a3a12c435d6 100644 --- a/arch/tile/kernel/irq.c +++ b/arch/tile/kernel/irq.c @@ -176,43 +176,43 @@ void disable_percpu_irq(unsigned int irq) EXPORT_SYMBOL(disable_percpu_irq); /* Mask an interrupt. */ -static void tile_irq_chip_mask(unsigned int irq) +static void tile_irq_chip_mask(struct irq_data *d) { - mask_irqs(1UL << irq); + mask_irqs(1UL << d->irq); } /* Unmask an interrupt. */ -static void tile_irq_chip_unmask(unsigned int irq) +static void tile_irq_chip_unmask(struct irq_data *d) { - unmask_irqs(1UL << irq); + unmask_irqs(1UL << d->irq); } /* * Clear an interrupt before processing it so that any new assertions * will trigger another irq. */ -static void tile_irq_chip_ack(unsigned int irq) +static void tile_irq_chip_ack(struct irq_data *d) { - if ((unsigned long)get_irq_chip_data(irq) != IS_HW_CLEARED) - clear_irqs(1UL << irq); + if ((unsigned long)irq_data_get_irq_chip_data(d) != IS_HW_CLEARED) + clear_irqs(1UL << d->irq); } /* * For per-cpu interrupts, we need to avoid unmasking any interrupts * that we disabled via disable_percpu_irq(). */ -static void tile_irq_chip_eoi(unsigned int irq) +static void tile_irq_chip_eoi(struct irq_data *d) { - if (!(__get_cpu_var(irq_disable_mask) & (1UL << irq))) - unmask_irqs(1UL << irq); + if (!(__get_cpu_var(irq_disable_mask) & (1UL << d->irq))) + unmask_irqs(1UL << d->irq); } static struct irq_chip tile_irq_chip = { .name = "tile_irq_chip", - .ack = tile_irq_chip_ack, - .eoi = tile_irq_chip_eoi, - .mask = tile_irq_chip_mask, - .unmask = tile_irq_chip_unmask, + .irq_ack = tile_irq_chip_ack, + .irq_eoi = tile_irq_chip_eoi, + .irq_mask = tile_irq_chip_mask, + .irq_unmask = tile_irq_chip_unmask, }; void __init init_IRQ(void) -- cgit v1.2.3-18-g5258 From 14536076dfa382a4b302709ffd3041ae10107144 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 6 Feb 2011 23:04:42 +0000 Subject: tile: Use proper accessor functions in show_interrupt() Signed-off-by: Thomas Gleixner Signed-off-by: Chris Metcalf --- arch/tile/kernel/irq.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/tile/kernel/irq.c b/arch/tile/kernel/irq.c index a3a12c435d6..0baa7580121 100644 --- a/arch/tile/kernel/irq.c +++ b/arch/tile/kernel/irq.c @@ -277,8 +277,10 @@ int show_interrupts(struct seq_file *p, void *v) } if (i < NR_IRQS) { - raw_spin_lock_irqsave(&irq_desc[i].lock, flags); - action = irq_desc[i].action; + struct irq_desc *desc = irq_to_desc(i); + + raw_spin_lock_irqsave(&desc->lock, flags); + action = desc->action; if (!action) goto skip; seq_printf(p, "%3d: ", i); @@ -288,7 +290,7 @@ int show_interrupts(struct seq_file *p, void *v) for_each_online_cpu(j) seq_printf(p, "%10u ", kstat_irqs_cpu(i, j)); #endif - seq_printf(p, " %14s", irq_desc[i].chip->name); + seq_printf(p, " %14s", get_irq_desc_chip(desc)->name); seq_printf(p, " %s", action->name); for (action = action->next; action; action = action->next) @@ -296,7 +298,7 @@ int show_interrupts(struct seq_file *p, void *v) seq_putc(p, '\n'); skip: - raw_spin_unlock_irqrestore(&irq_desc[i].lock, flags); + raw_spin_unlock_irqrestore(&desc->lock, flags); } return 0; } -- cgit v1.2.3-18-g5258 From deb4b003eb33e63af23cd887ded04ad77ab3dcbb Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 6 Feb 2011 23:04:44 +0000 Subject: tile: Select GENERIC_HARDIRQS_NO_DEPRECATED irq chip converted and proper accessor functions used. Signed-off-by: Thomas Gleixner Signed-off-by: Chris Metcalf --- arch/tile/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig index 08948e4e150..9e4eb51b673 100644 --- a/arch/tile/Kconfig +++ b/arch/tile/Kconfig @@ -11,6 +11,7 @@ config TILE select HAVE_GENERIC_HARDIRQS select GENERIC_IRQ_PROBE select GENERIC_PENDING_IRQ if SMP + select GENERIC_HARDIRQS_NO_DEPRECATED # FIXME: investigate whether we need/want these options. # select HAVE_IOREMAP_PROT -- cgit v1.2.3-18-g5258 From f1c2b357148ec27fcc6ce0992211209a0ea20d8f Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 22 Feb 2011 21:07:36 +0100 Subject: x86: e820: Remove conditional early mapping in parse_e820_ext This patch ensures that the memory passed from parse_setup_data() is large enough to cover the complete data structure. That means that the conditional mapping in parse_e820_ext() can go. While here, I also attempt not to map two pages if the address is not aligned to a page boundary. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Dirk Brandewie Cc: sodaville@linutronix.de Cc: devicetree-discuss@lists.ozlabs.org LKML-Reference: <1298405266-1624-2-git-send-email-bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner --- arch/x86/include/asm/e820.h | 2 +- arch/x86/kernel/e820.c | 8 +------- arch/x86/kernel/setup.c | 17 ++++++++++++++--- 3 files changed, 16 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/e820.h b/arch/x86/include/asm/e820.h index e99d55d74df..908b96957d8 100644 --- a/arch/x86/include/asm/e820.h +++ b/arch/x86/include/asm/e820.h @@ -96,7 +96,7 @@ extern void e820_setup_gap(void); extern int e820_search_gap(unsigned long *gapstart, unsigned long *gapsize, unsigned long start_addr, unsigned long long end_addr); struct setup_data; -extern void parse_e820_ext(struct setup_data *data, unsigned long pa_data); +extern void parse_e820_ext(struct setup_data *data); #if defined(CONFIG_X86_64) || \ (defined(CONFIG_X86_32) && defined(CONFIG_HIBERNATION)) diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 294f26da0c0..5fad6268465 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -667,21 +667,15 @@ __init void e820_setup_gap(void) * boot_params.e820_map, others are passed via SETUP_E820_EXT node of * linked list of struct setup_data, which is parsed here. */ -void __init parse_e820_ext(struct setup_data *sdata, unsigned long pa_data) +void __init parse_e820_ext(struct setup_data *sdata) { - u32 map_len; int entries; struct e820entry *extmap; entries = sdata->len / sizeof(struct e820entry); - map_len = sdata->len + sizeof(struct setup_data); - if (map_len > PAGE_SIZE) - sdata = early_ioremap(pa_data, map_len); extmap = (struct e820entry *)(sdata->data); __append_e820_map(extmap, entries); sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map); - if (map_len > PAGE_SIZE) - early_iounmap(sdata, map_len); printk(KERN_INFO "extended physical RAM map:\n"); e820_print_map("extended"); } diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index ca2f10622a7..9521483ce58 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -429,16 +429,27 @@ static void __init parse_setup_data(void) return; pa_data = boot_params.hdr.setup_data; while (pa_data) { - data = early_memremap(pa_data, PAGE_SIZE); + u32 data_len, map_len; + + map_len = max(PAGE_SIZE - (pa_data & ~PAGE_MASK), + (u64)sizeof(struct setup_data)); + data = early_memremap(pa_data, map_len); + data_len = data->len + sizeof(struct setup_data); + if (data_len > map_len) { + early_iounmap(data, map_len); + data = early_memremap(pa_data, data_len); + map_len = data_len; + } + switch (data->type) { case SETUP_E820_EXT: - parse_e820_ext(data, pa_data); + parse_e820_ext(data); break; default: break; } pa_data = data->next; - early_iounmap(data, PAGE_SIZE); + early_iounmap(data, map_len); } } -- cgit v1.2.3-18-g5258 From da6b737b9ab768dd06bb4b0395131d10e524cf83 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 22 Feb 2011 21:07:37 +0100 Subject: x86: Add device tree support This patch adds minimal support for device tree on x86. The device tree blob is passed to the kernel via setup_data which requires at least boot protocol 2.09. Memory size, restricted memory regions, boot arguments are gathered the traditional way so things like cmd_line are just here to let the code compile. The current plan is use the device tree as an extension and to gather information which can not be enumerated and would have to be hardcoded otherwise. This includes things like - which devices are on this I2C/SPI bus? - how are the interrupts wired to IO APIC? - where could my hpet be? Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Dirk Brandewie Acked-by: Grant Likely Cc: sodaville@linutronix.de Cc: devicetree-discuss@lists.ozlabs.org LKML-Reference: <1298405266-1624-3-git-send-email-bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig | 2 ++ arch/x86/include/asm/bootparam.h | 1 + arch/x86/include/asm/irq.h | 3 --- arch/x86/include/asm/prom.h | 48 ++++++++++++++++++++++++++++++++++++- arch/x86/kernel/Makefile | 1 + arch/x86/kernel/devicetree.c | 51 ++++++++++++++++++++++++++++++++++++++++ arch/x86/kernel/irq.c | 9 ------- arch/x86/kernel/setup.c | 4 ++++ 8 files changed, 106 insertions(+), 13 deletions(-) create mode 100644 arch/x86/kernel/devicetree.c (limited to 'arch') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index efbae0c7521..b4c2e9c6762 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -382,6 +382,8 @@ config X86_INTEL_CE depends on X86_32 depends on X86_EXTENDED_PLATFORM select X86_REBOOTFIXUPS + select OF + select OF_EARLY_FLATTREE ---help--- Select for the Intel CE media processor (CE4100) SOC. This option compiles in support for the CE4100 SOC for settop diff --git a/arch/x86/include/asm/bootparam.h b/arch/x86/include/asm/bootparam.h index c8bfe63a06d..e020d88ec02 100644 --- a/arch/x86/include/asm/bootparam.h +++ b/arch/x86/include/asm/bootparam.h @@ -12,6 +12,7 @@ /* setup data types */ #define SETUP_NONE 0 #define SETUP_E820_EXT 1 +#define SETUP_DTB 2 /* extensible setup data list node */ struct setup_data { diff --git a/arch/x86/include/asm/irq.h b/arch/x86/include/asm/irq.h index c704b38c57a..ba870bb6dd8 100644 --- a/arch/x86/include/asm/irq.h +++ b/arch/x86/include/asm/irq.h @@ -10,9 +10,6 @@ #include #include -/* Even though we don't support this, supply it to appease OF */ -static inline void irq_dispose_mapping(unsigned int virq) { } - static inline int irq_canonicalize(int irq) { return ((irq == 2) ? 9 : irq); diff --git a/arch/x86/include/asm/prom.h b/arch/x86/include/asm/prom.h index b4ec95f0751..e46f2a2b57a 100644 --- a/arch/x86/include/asm/prom.h +++ b/arch/x86/include/asm/prom.h @@ -1 +1,47 @@ -/* dummy prom.h; here to make linux/of.h's #includes happy */ +/* + * Definitions for Device tree / OpenFirmware handling on X86 + * + * based on arch/powerpc/include/asm/prom.h which is + * Copyright (C) 1996-2005 Paul Mackerras. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_X86_PROM_H +#define _ASM_X86_PROM_H +#ifndef __ASSEMBLY__ + +#include +#include + +#include +#include +#include + +#ifdef CONFIG_OF +extern void add_dtb(u64 data); +#else +static inline void add_dtb(u64 data) { } +#endif + +extern char cmd_line[COMMAND_LINE_SIZE]; + +#define pci_address_to_pio pci_address_to_pio +unsigned long pci_address_to_pio(phys_addr_t addr); + +/** + * irq_dispose_mapping - Unmap an interrupt + * @virq: linux virq number of the interrupt to unmap + * + * FIXME: We really should implement proper virq handling like power, + * but that's going to be major surgery. + */ +static inline void irq_dispose_mapping(unsigned int virq) { } + +#define HAVE_ARCH_DEVTREE_FIXUPS + +#endif /* __ASSEMBLY__ */ +#endif diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 34244b2cd88..6ac5036adf4 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -109,6 +109,7 @@ obj-$(CONFIG_MICROCODE) += microcode.o obj-$(CONFIG_X86_CHECK_BIOS_CORRUPTION) += check.o obj-$(CONFIG_SWIOTLB) += pci-swiotlb.o +obj-$(CONFIG_OF) += devicetree.o ### # 64 bit specific files diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c new file mode 100644 index 00000000000..0b8f0daef93 --- /dev/null +++ b/arch/x86/kernel/devicetree.c @@ -0,0 +1,51 @@ +/* + * Architecture specific OF callbacks. + */ +#include +#include +#include +#include +#include +#include +#include + +char __initdata cmd_line[COMMAND_LINE_SIZE]; + +unsigned int irq_create_of_mapping(struct device_node *controller, + const u32 *intspec, unsigned int intsize) +{ + return intspec[0]; + +} +EXPORT_SYMBOL_GPL(irq_create_of_mapping); + +unsigned long pci_address_to_pio(phys_addr_t address) +{ + /* + * The ioport address can be directly used by inX / outX + */ + BUG_ON(address >= (1 << 16)); + return (unsigned long)address; +} +EXPORT_SYMBOL_GPL(pci_address_to_pio); + +void __init early_init_dt_scan_chosen_arch(unsigned long node) +{ + BUG(); +} + +void __init early_init_dt_add_memory_arch(u64 base, u64 size) +{ + BUG(); +} + +void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align) +{ + return __alloc_bootmem(size, align, __pa(MAX_DMA_ADDRESS)); +} + +void __init add_dtb(u64 data) +{ + initial_boot_params = phys_to_virt((u64) (u32) data + + offsetof(struct setup_data, data)); +} diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c index 387b6a0c9e8..753136003af 100644 --- a/arch/x86/kernel/irq.c +++ b/arch/x86/kernel/irq.c @@ -276,15 +276,6 @@ void smp_x86_platform_ipi(struct pt_regs *regs) EXPORT_SYMBOL_GPL(vector_used_by_percpu_irq); -#ifdef CONFIG_OF -unsigned int irq_create_of_mapping(struct device_node *controller, - const u32 *intspec, unsigned int intsize) -{ - return intspec[0]; -} -EXPORT_SYMBOL_GPL(irq_create_of_mapping); -#endif - #ifdef CONFIG_HOTPLUG_CPU /* A cpu has been removed from cpu_online_mask. Reset irq affinities. */ void fixup_irqs(void) diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 9521483ce58..33dcbce1ab0 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -113,6 +113,7 @@ #endif #include #include +#include /* * end_pfn only includes RAM, while max_pfn_mapped includes all e820 entries. @@ -445,6 +446,9 @@ static void __init parse_setup_data(void) case SETUP_E820_EXT: parse_e820_ext(data); break; + case SETUP_DTB: + add_dtb(pa_data); + break; default: break; } -- cgit v1.2.3-18-g5258 From df2634f43f5106947f3735a0b61a6527a4b278cd Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 22 Feb 2011 21:07:38 +0100 Subject: x86: dtb: Add a device tree for CE4100 History: v1..v2: - dropped device_type except for cpu & pci. I have the compatible string for pci so I can drop the device_type once it is possible - I lowercased all compatible types. I will need to resend some patches which have upper case intel - The cpu had the same compatible string as the soc node. So I added to the soc node -immr for internel memory mapped registers. - I added generic names for all parts. - I reworked the i2c bars matching the way you suggested. I added a compatible node for the PCI device which only the PCI ids in its compatible string. The bars (each represents a complete i2c controller) have a "intel,ce4100-i2c-controller" compatible node. It is not used by the driver. The driver is probed via PCI ids (by the pci subsystem not OF) and matches the bar address against the ressource in the child node. Once there is a hit the node is attached. - The SPI driver is also probed via pci. However I also attached a compatible property based on PCI ids v2..v3: - intel,ce4100-immr become intel,ce4100-cp. cp stands for core peripherals. The Atom data sheet talks here about ACPI devices. Since we don't have ACPI this does not apply here. - The interrupt map is gone. There are now plenty of device nodes. - The "unit address string" got fixed, it uses not DD,V format. v3..v4: - added descriptions for compatible nodes introduced here: - intel,ce4100-ioapic - intel,ce4100-lapic - intel,ce4100-hpet - intel,ce4100 - intel,ce4100-cp - intel,ce4100-pci - added a description about I2C controller magic. - Added gpio-controller and gpio-cells property to gpio devices. Those properties are not (yet) used. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Dirk Brandewie Acked-by: Grant Likely Cc: sodaville@linutronix.de Cc: devicetree-discuss@lists.ozlabs.org LKML-Reference: <1298405266-1624-4-git-send-email-bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner --- arch/x86/platform/ce4100/falconfalls.dts | 428 +++++++++++++++++++++++++++++++ 1 file changed, 428 insertions(+) create mode 100644 arch/x86/platform/ce4100/falconfalls.dts (limited to 'arch') diff --git a/arch/x86/platform/ce4100/falconfalls.dts b/arch/x86/platform/ce4100/falconfalls.dts new file mode 100644 index 00000000000..dc701ea5854 --- /dev/null +++ b/arch/x86/platform/ce4100/falconfalls.dts @@ -0,0 +1,428 @@ +/* + * CE4100 on Falcon Falls + * + * (c) Copyright 2010 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; version 2 of the License. + */ +/dts-v1/; +/ { + model = "intel,falconfalls"; + compatible = "intel,falconfalls"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "intel,ce4100"; + reg = <0>; + lapic = <&lapic0>; + }; + }; + + soc@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "intel,ce4100-cp"; + ranges; + + ioapic1: interrupt-controller@fec00000 { + #interrupt-cells = <2>; + compatible = "intel,ce4100-ioapic"; + interrupt-controller; + reg = <0xfec00000 0x1000>; + }; + + timer@fed00000 { + compatible = "intel,ce4100-hpet"; + reg = <0xfed00000 0x200>; + }; + + lapic0: interrupt-controller@fee00000 { + compatible = "intel,ce4100-lapic"; + reg = <0xfee00000 0x1000>; + }; + + pci@3fc { + #address-cells = <3>; + #size-cells = <2>; + compatible = "intel,ce4100-pci", "pci"; + device_type = "pci"; + bus-range = <0 0>; + ranges = <0x2000000 0 0xbffff000 0xbffff000 0 0x1000 + 0x2000000 0 0xdffe0000 0xdffe0000 0 0x1000 + 0x0000000 0 0x0 0x0 0 0x100>; + + /* Secondary IO-APIC */ + ioapic2: interrupt-controller@0,1 { + #interrupt-cells = <2>; + compatible = "intel,ce4100-ioapic"; + interrupt-controller; + reg = <0x100 0x0 0x0 0x0 0x0>; + assigned-addresses = <0x02000000 0x0 0xbffff000 0x0 0x1000>; + }; + + pci@1,0 { + #address-cells = <3>; + #size-cells = <2>; + compatible = "intel,ce4100-pci", "pci"; + device_type = "pci"; + bus-range = <1 1>; + ranges = <0x2000000 0 0xdffe0000 0x2000000 0 0xdffe0000 0 0x1000>; + + interrupt-parent = <&ioapic2>; + + display@2,0 { + compatible = "pci8086,2e5b.2", + "pci8086,2e5b", + "pciclass038000", + "pciclass0380"; + + reg = <0x11000 0x0 0x0 0x0 0x0>; + interrupts = <0 1>; + }; + + multimedia@3,0 { + compatible = "pci8086,2e5c.2", + "pci8086,2e5c", + "pciclass048000", + "pciclass0480"; + + reg = <0x11800 0x0 0x0 0x0 0x0>; + interrupts = <2 1>; + }; + + multimedia@4,0 { + compatible = "pci8086,2e5d.2", + "pci8086,2e5d", + "pciclass048000", + "pciclass0480"; + + reg = <0x12000 0x0 0x0 0x0 0x0>; + interrupts = <4 1>; + }; + + multimedia@4,1 { + compatible = "pci8086,2e5e.2", + "pci8086,2e5e", + "pciclass048000", + "pciclass0480"; + + reg = <0x12100 0x0 0x0 0x0 0x0>; + interrupts = <5 1>; + }; + + sound@6,0 { + compatible = "pci8086,2e5f.2", + "pci8086,2e5f", + "pciclass040100", + "pciclass0401"; + + reg = <0x13000 0x0 0x0 0x0 0x0>; + interrupts = <6 1>; + }; + + sound@6,1 { + compatible = "pci8086,2e5f.2", + "pci8086,2e5f", + "pciclass040100", + "pciclass0401"; + + reg = <0x13100 0x0 0x0 0x0 0x0>; + interrupts = <7 1>; + }; + + sound@6,2 { + compatible = "pci8086,2e60.2", + "pci8086,2e60", + "pciclass040100", + "pciclass0401"; + + reg = <0x13200 0x0 0x0 0x0 0x0>; + interrupts = <8 1>; + }; + + display@8,0 { + compatible = "pci8086,2e61.2", + "pci8086,2e61", + "pciclass038000", + "pciclass0380"; + + reg = <0x14000 0x0 0x0 0x0 0x0>; + interrupts = <9 1>; + }; + + display@8,1 { + compatible = "pci8086,2e62.2", + "pci8086,2e62", + "pciclass038000", + "pciclass0380"; + + reg = <0x14100 0x0 0x0 0x0 0x0>; + interrupts = <10 1>; + }; + + multimedia@8,2 { + compatible = "pci8086,2e63.2", + "pci8086,2e63", + "pciclass048000", + "pciclass0480"; + + reg = <0x14200 0x0 0x0 0x0 0x0>; + interrupts = <11 1>; + }; + + entertainment-encryption@9,0 { + compatible = "pci8086,2e64.2", + "pci8086,2e64", + "pciclass101000", + "pciclass1010"; + + reg = <0x14800 0x0 0x0 0x0 0x0>; + interrupts = <12 1>; + }; + + localbus@a,0 { + compatible = "pci8086,2e65.2", + "pci8086,2e65", + "pciclassff0000", + "pciclassff00"; + + reg = <0x15000 0x0 0x0 0x0 0x0>; + }; + + serial@b,0 { + compatible = "pci8086,2e66.2", + "pci8086,2e66", + "pciclass070003", + "pciclass0700"; + + reg = <0x15800 0x0 0x0 0x0 0x0>; + interrupts = <14 1>; + }; + + gpio@b,1 { + compatible = "pci8086,2e67.2", + "pci8086,2e67", + "pciclassff0000", + "pciclassff00"; + + #gpio-cells = <2>; + reg = <0x15900 0x0 0x0 0x0 0x0>; + interrupts = <15 1>; + gpio-controller; + }; + + i2c-controller@b,2 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "pci8086,2e68.2", + "pci8086,2e68", + "pciclass,ff0000", + "pciclass,ff00"; + + reg = <0x15a00 0x0 0x0 0x0 0x0>; + interrupts = <16 1>; + ranges = <0 0 0x02000000 0 0xdffe0500 0x100 + 1 0 0x02000000 0 0xdffe0600 0x100 + 2 0 0x02000000 0 0xdffe0700 0x100>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "intel,ce4100-i2c-controller"; + reg = <0 0 0x100>; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "intel,ce4100-i2c-controller"; + reg = <1 0 0x100>; + + gpio@26 { + #gpio-cells = <2>; + compatible = "ti,pcf8575"; + reg = <0x26>; + gpio-controller; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "intel,ce4100-i2c-controller"; + reg = <2 0 0x100>; + + gpio@26 { + #gpio-cells = <2>; + compatible = "ti,pcf8575"; + reg = <0x26>; + gpio-controller; + }; + }; + }; + + smard-card@b,3 { + compatible = "pci8086,2e69.2", + "pci8086,2e69", + "pciclass070500", + "pciclass0705"; + + reg = <0x15b00 0x0 0x0 0x0 0x0>; + interrupts = <15 1>; + }; + + spi-controller@b,4 { + #address-cells = <1>; + #size-cells = <0>; + compatible = + "pci8086,2e6a.2", + "pci8086,2e6a", + "pciclass,ff0000", + "pciclass,ff00"; + + reg = <0x15c00 0x0 0x0 0x0 0x0>; + interrupts = <15 1>; + + dac@0 { + compatible = "ti,pcm1755"; + reg = <0>; + spi-max-frequency = <115200>; + }; + + dac@1 { + compatible = "ti,pcm1609a"; + reg = <1>; + spi-max-frequency = <115200>; + }; + + eeprom@2 { + compatible = "atmel,at93c46"; + reg = <2>; + spi-max-frequency = <115200>; + }; + }; + + multimedia@b,7 { + compatible = "pci8086,2e6d.2", + "pci8086,2e6d", + "pciclassff0000", + "pciclassff00"; + + reg = <0x15f00 0x0 0x0 0x0 0x0>; + }; + + ethernet@c,0 { + compatible = "pci8086,2e6e.2", + "pci8086,2e6e", + "pciclass020000", + "pciclass0200"; + + reg = <0x16000 0x0 0x0 0x0 0x0>; + interrupts = <21 1>; + }; + + clock@c,1 { + compatible = "pci8086,2e6f.2", + "pci8086,2e6f", + "pciclassff0000", + "pciclassff00"; + + reg = <0x16100 0x0 0x0 0x0 0x0>; + interrupts = <3 1>; + }; + + usb@d,0 { + compatible = "pci8086,2e70.2", + "pci8086,2e70", + "pciclass0c0320", + "pciclass0c03"; + + reg = <0x16800 0x0 0x0 0x0 0x0>; + interrupts = <22 3>; + }; + + usb@d,1 { + compatible = "pci8086,2e70.2", + "pci8086,2e70", + "pciclass0c0320", + "pciclass0c03"; + + reg = <0x16900 0x0 0x0 0x0 0x0>; + interrupts = <22 3>; + }; + + sata@e,0 { + compatible = "pci8086,2e71.0", + "pci8086,2e71", + "pciclass010601", + "pciclass0106"; + + reg = <0x17000 0x0 0x0 0x0 0x0>; + interrupts = <23 3>; + }; + + flash@f,0 { + compatible = "pci8086,701.1", + "pci8086,701", + "pciclass050100", + "pciclass0501"; + + reg = <0x17800 0x0 0x0 0x0 0x0>; + interrupts = <13 1>; + }; + + entertainment-encryption@10,0 { + compatible = "pci8086,702.1", + "pci8086,702", + "pciclass101000", + "pciclass1010"; + + reg = <0x18000 0x0 0x0 0x0 0x0>; + }; + + co-processor@11,0 { + compatible = "pci8086,703.1", + "pci8086,703", + "pciclass0b4000", + "pciclass0b40"; + + reg = <0x18800 0x0 0x0 0x0 0x0>; + interrupts = <1 1>; + }; + + multimedia@12,0 { + compatible = "pci8086,704.0", + "pci8086,704", + "pciclass048000", + "pciclass0480"; + + reg = <0x19000 0x0 0x0 0x0 0x0>; + }; + }; + + isa@1f,0 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "isa"; + ranges = <1 0 0 0 0 0x100>; + + rtc@70 { + compatible = "intel,ce4100-rtc", "motorola,mc146818"; + interrupts = <8 3>; + interrupt-parent = <&ioapic1>; + ctrl-reg = <2>; + freq-reg = <0x26>; + reg = <1 0x70 2>; + }; + }; + }; + }; +}; -- cgit v1.2.3-18-g5258 From 19c4f5f7f7e9c5db89a91627af2a426cfb5568de Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 22 Feb 2011 21:07:39 +0100 Subject: x86: dtb: Add irq domain abstraction The here introduced irq_domain abstraction represents a generic irq controller. It is a subset of powerpc's irq_host which is going to be renamed to irq_domain and then become generic. This implementation will be removed once it is generic. The xlate callback is resposible to parse irq informations like irq type and number and returns the hardware irq number which is reported by the hardware as active. Signed-off-by: Sebastian Andrzej Siewior Tested-by: Dirk Brandewie Acked-by: Grant Likely Cc: sodaville@linutronix.de Cc: devicetree-discuss@lists.ozlabs.org LKML-Reference: <1298405266-1624-5-git-send-email-bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner --- arch/x86/include/asm/irq_controller.h | 12 +++++++++ arch/x86/include/asm/prom.h | 2 ++ arch/x86/kernel/devicetree.c | 46 ++++++++++++++++++++++++++++++++++- 3 files changed, 59 insertions(+), 1 deletion(-) create mode 100644 arch/x86/include/asm/irq_controller.h (limited to 'arch') diff --git a/arch/x86/include/asm/irq_controller.h b/arch/x86/include/asm/irq_controller.h new file mode 100644 index 00000000000..423bbbddf36 --- /dev/null +++ b/arch/x86/include/asm/irq_controller.h @@ -0,0 +1,12 @@ +#ifndef __IRQ_CONTROLLER__ +#define __IRQ_CONTROLLER__ + +struct irq_domain { + int (*xlate)(struct irq_domain *h, const u32 *intspec, u32 intsize, + u32 *out_hwirq, u32 *out_type); + void *priv; + struct device_node *controller; + struct list_head l; +}; + +#endif diff --git a/arch/x86/include/asm/prom.h b/arch/x86/include/asm/prom.h index e46f2a2b57a..83833ac33dd 100644 --- a/arch/x86/include/asm/prom.h +++ b/arch/x86/include/asm/prom.h @@ -20,9 +20,11 @@ #include #include #include +#include #ifdef CONFIG_OF extern void add_dtb(u64 data); +void add_interrupt_host(struct irq_domain *ih); #else static inline void add_dtb(u64 data) { } #endif diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c index 0b8f0daef93..ef98e4edada 100644 --- a/arch/x86/kernel/devicetree.c +++ b/arch/x86/kernel/devicetree.c @@ -3,19 +3,63 @@ */ #include #include +#include #include #include #include #include #include +#include + char __initdata cmd_line[COMMAND_LINE_SIZE]; +static LIST_HEAD(irq_domains); +static DEFINE_RAW_SPINLOCK(big_irq_lock); + +void add_interrupt_host(struct irq_domain *ih) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&big_irq_lock, flags); + list_add(&ih->l, &irq_domains); + raw_spin_unlock_irqrestore(&big_irq_lock, flags); +} + +static struct irq_domain *get_ih_from_node(struct device_node *controller) +{ + struct irq_domain *ih, *found = NULL; + unsigned long flags; + + raw_spin_lock_irqsave(&big_irq_lock, flags); + list_for_each_entry(ih, &irq_domains, l) { + if (ih->controller == controller) { + found = ih; + break; + } + } + raw_spin_unlock_irqrestore(&big_irq_lock, flags); + return found; +} unsigned int irq_create_of_mapping(struct device_node *controller, const u32 *intspec, unsigned int intsize) { - return intspec[0]; + struct irq_domain *ih; + u32 virq, type; + int ret; + ih = get_ih_from_node(controller); + if (!ih) + return 0; + ret = ih->xlate(ih, intspec, intsize, &virq, &type); + if (ret) + return ret; + if (type == IRQ_TYPE_NONE) + return virq; + /* set the mask if it is different from current */ + if (type == (irq_to_desc(virq)->status & IRQF_TRIGGER_MASK)) + set_irq_type(virq, type); + return virq; } EXPORT_SYMBOL_GPL(irq_create_of_mapping); -- cgit v1.2.3-18-g5258 From 3879a6f32948330782889cebc4d74c4f2316c676 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 22 Feb 2011 21:07:40 +0100 Subject: x86: dtb: Add early parsing of IO_APIC APIC and IO_APIC have to be added to the system early because native_init_IRQ() requires it. In order to obtain the address of the ioapic the device tree has to be unflattened so of_address_to_resource() works. The device tree is relocated to ensure it is always covered by the kernel mapping. That way the boot loader does not have to make any assumptions about kernel's memory layout. Signed-off-by: Sebastian Andrzej Siewior Acked-by: Grant Likely Cc: sodaville@linutronix.de Cc: devicetree-discuss@lists.ozlabs.org Cc: Dirk Brandewie LKML-Reference: <1298405266-1624-6-git-send-email-bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner --- arch/x86/include/asm/prom.h | 7 +++ arch/x86/kernel/devicetree.c | 110 ++++++++++++++++++++++++++++++++++++++++++- arch/x86/kernel/irqinit.c | 3 +- 3 files changed, 117 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/prom.h b/arch/x86/include/asm/prom.h index 83833ac33dd..35ec32b4750 100644 --- a/arch/x86/include/asm/prom.h +++ b/arch/x86/include/asm/prom.h @@ -23,10 +23,17 @@ #include #ifdef CONFIG_OF +extern int of_ioapic; +extern u64 initial_dtb; extern void add_dtb(u64 data); +void x86_dtb_find_config(void); +void x86_dtb_get_config(unsigned int unused); void add_interrupt_host(struct irq_domain *ih); #else static inline void add_dtb(u64 data) { } +#define x86_dtb_find_config x86_init_noop +#define x86_dtb_get_config x86_init_uint_noop +#define of_ioapic 0 #endif extern char cmd_line[COMMAND_LINE_SIZE]; diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c index ef98e4edada..2739d5613a3 100644 --- a/arch/x86/kernel/devicetree.c +++ b/arch/x86/kernel/devicetree.c @@ -7,15 +7,20 @@ #include #include #include +#include #include #include #include +#include +__initdata u64 initial_dtb; char __initdata cmd_line[COMMAND_LINE_SIZE]; static LIST_HEAD(irq_domains); static DEFINE_RAW_SPINLOCK(big_irq_lock); +int __initdata of_ioapic; + void add_interrupt_host(struct irq_domain *ih) { unsigned long flags; @@ -90,6 +95,107 @@ void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align) void __init add_dtb(u64 data) { - initial_boot_params = phys_to_virt((u64) (u32) data + - offsetof(struct setup_data, data)); + initial_dtb = data + offsetof(struct setup_data, data); +} + +static void __init dtb_lapic_setup(void) +{ +#ifdef CONFIG_X86_LOCAL_APIC + if (apic_force_enable()) + return; + + smp_found_config = 1; + pic_mode = 1; + /* Required for ioapic registration */ + set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr); + if (boot_cpu_physical_apicid == -1U) + boot_cpu_physical_apicid = read_apic_id(); + + generic_processor_info(boot_cpu_physical_apicid, + GET_APIC_VERSION(apic_read(APIC_LVR))); +#endif +} + +#ifdef CONFIG_X86_IO_APIC +static unsigned int ioapic_id; + +static void __init dtb_add_ioapic(struct device_node *dn) +{ + struct resource r; + int ret; + + ret = of_address_to_resource(dn, 0, &r); + if (ret) { + printk(KERN_ERR "Can't obtain address from node %s.\n", + dn->full_name); + return; + } + mp_register_ioapic(++ioapic_id, r.start, gsi_top); +} + +static void __init dtb_ioapic_setup(void) +{ + struct device_node *dn; + + if (!smp_found_config) + return; + + for_each_compatible_node(dn, NULL, "intel,ce4100-ioapic") + dtb_add_ioapic(dn); + + if (nr_ioapics) { + of_ioapic = 1; + return; + } + printk(KERN_ERR "Error: No information about IO-APIC in OF.\n"); + smp_found_config = 0; +} +#else +static void __init dtb_ioapic_setup(void) {} +#endif + +static void __init dtb_apic_setup(void) +{ + dtb_lapic_setup(); + dtb_ioapic_setup(); +} + +void __init x86_dtb_find_config(void) +{ + if (initial_dtb) + smp_found_config = 1; + else + printk(KERN_ERR "Missing device tree!.\n"); +} + +void __init x86_dtb_get_config(unsigned int unused) +{ + u32 size, map_len; + void *new_dtb; + + if (!initial_dtb) + return; + + map_len = max(PAGE_SIZE - (initial_dtb & ~PAGE_MASK), + (u64)sizeof(struct boot_param_header)); + + initial_boot_params = early_memremap(initial_dtb, map_len); + size = be32_to_cpu(initial_boot_params->totalsize); + if (map_len < size) { + early_iounmap(initial_boot_params, map_len); + initial_boot_params = early_memremap(initial_dtb, size); + map_len = size; + } + + new_dtb = alloc_bootmem(size); + memcpy(new_dtb, initial_boot_params, size); + early_iounmap(initial_boot_params, map_len); + + initial_boot_params = new_dtb; + + /* root level address cells */ + of_scan_flat_dt(early_init_dt_scan_root, NULL); + + unflatten_device_tree(); + dtb_apic_setup(); } diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c index c752e973958..4cadf8688db 100644 --- a/arch/x86/kernel/irqinit.c +++ b/arch/x86/kernel/irqinit.c @@ -25,6 +25,7 @@ #include #include #include +#include /* * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts: @@ -243,7 +244,7 @@ void __init native_init_IRQ(void) set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]); } - if (!acpi_ioapic) + if (!acpi_ioapic && !of_ioapic) setup_irq(2, &irq2); #ifdef CONFIG_X86_32 -- cgit v1.2.3-18-g5258 From ffb9fc68dff38f811eeb24c15aba0418b6a8ee53 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 22 Feb 2011 21:07:41 +0100 Subject: x86: dtb: Add device tree support for HPET Set hpet_address based on information provied form DTB Signed-off-by: Sebastian Andrzej Siewior Acked-by: Grant Likely Cc: sodaville@linutronix.de Cc: devicetree-discuss@lists.ozlabs.org Cc: Dirk Brandewie LKML-Reference: <1298405266-1624-7-git-send-email-bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner --- arch/x86/kernel/devicetree.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c index 2739d5613a3..dbb3bda40af 100644 --- a/arch/x86/kernel/devicetree.c +++ b/arch/x86/kernel/devicetree.c @@ -11,6 +11,7 @@ #include #include +#include #include #include @@ -98,6 +99,23 @@ void __init add_dtb(u64 data) initial_dtb = data + offsetof(struct setup_data, data); } +static void __init dtb_setup_hpet(void) +{ + struct device_node *dn; + struct resource r; + int ret; + + dn = of_find_compatible_node(NULL, NULL, "intel,ce4100-hpet"); + if (!dn) + return; + ret = of_address_to_resource(dn, 0, &r); + if (ret) { + WARN_ON(1); + return; + } + hpet_address = r.start; +} + static void __init dtb_lapic_setup(void) { #ifdef CONFIG_X86_LOCAL_APIC @@ -197,5 +215,6 @@ void __init x86_dtb_get_config(unsigned int unused) of_scan_flat_dt(early_init_dt_scan_root, NULL); unflatten_device_tree(); + dtb_setup_hpet(); dtb_apic_setup(); } -- cgit v1.2.3-18-g5258 From 96e0a0797eba35b5420c710b928f19094b2d5c45 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 22 Feb 2011 21:07:42 +0100 Subject: x86: dtb: Add support for PCI devices backed by dtb nodes x86_of_pci_init() does two things: - it provides a generic irq enable and disable function. enable queries the device tree for the interrupt information, calls ->xlate on the irq host and updates the pci->irq information for the device. - it walks through PCI bus(es) in the device tree and adds its children (device) nodes to appropriate pci_dev nodes in kernel. So the dtb node information is available at probe time of the PCI device. Adding a PCI bus based on the information in the device tree is currently not supported. Right now direct access via ioports is used. Signed-off-by: Sebastian Andrzej Siewior Tested-by: Dirk Brandewie Acked-by: Grant Likely Cc: sodaville@linutronix.de Cc: devicetree-discuss@lists.ozlabs.org LKML-Reference: <1298405266-1624-8-git-send-email-bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner --- arch/x86/include/asm/prom.h | 14 ++++++++ arch/x86/kernel/devicetree.c | 83 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 97 insertions(+) (limited to 'arch') diff --git a/arch/x86/include/asm/prom.h b/arch/x86/include/asm/prom.h index 35ec32b4750..8fcd519a44d 100644 --- a/arch/x86/include/asm/prom.h +++ b/arch/x86/include/asm/prom.h @@ -16,6 +16,7 @@ #include #include +#include #include #include @@ -29,8 +30,21 @@ extern void add_dtb(u64 data); void x86_dtb_find_config(void); void x86_dtb_get_config(unsigned int unused); void add_interrupt_host(struct irq_domain *ih); +void __cpuinit x86_of_pci_init(void); + +static inline struct device_node *pci_device_to_OF_node(struct pci_dev *pdev) +{ + return pdev ? pdev->dev.of_node : NULL; +} + +static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus) +{ + return pci_device_to_OF_node(bus->self); +} + #else static inline void add_dtb(u64 data) { } +static inline void x86_of_pci_init(void) { } #define x86_dtb_find_config x86_init_noop #define x86_dtb_get_config x86_init_uint_noop #define of_ioapic 0 diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c index dbb3bda40af..7b574226e0a 100644 --- a/arch/x86/kernel/devicetree.c +++ b/arch/x86/kernel/devicetree.c @@ -9,11 +9,15 @@ #include #include #include +#include #include +#include +#include #include #include #include +#include __initdata u64 initial_dtb; char __initdata cmd_line[COMMAND_LINE_SIZE]; @@ -99,6 +103,85 @@ void __init add_dtb(u64 data) initial_dtb = data + offsetof(struct setup_data, data); } +#ifdef CONFIG_PCI +static int x86_of_pci_irq_enable(struct pci_dev *dev) +{ + struct of_irq oirq; + u32 virq; + int ret; + u8 pin; + + ret = pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); + if (ret) + return ret; + if (!pin) + return 0; + + ret = of_irq_map_pci(dev, &oirq); + if (ret) + return ret; + + virq = irq_create_of_mapping(oirq.controller, oirq.specifier, + oirq.size); + if (virq == 0) + return -EINVAL; + dev->irq = virq; + return 0; +} + +static void x86_of_pci_irq_disable(struct pci_dev *dev) +{ +} + +void __cpuinit x86_of_pci_init(void) +{ + struct device_node *np; + + pcibios_enable_irq = x86_of_pci_irq_enable; + pcibios_disable_irq = x86_of_pci_irq_disable; + + for_each_node_by_type(np, "pci") { + const void *prop; + struct pci_bus *bus; + unsigned int bus_min; + struct device_node *child; + + prop = of_get_property(np, "bus-range", NULL); + if (!prop) + continue; + bus_min = be32_to_cpup(prop); + + bus = pci_find_bus(0, bus_min); + if (!bus) { + printk(KERN_ERR "Can't find a node for bus %s.\n", + np->full_name); + continue; + } + + if (bus->self) + bus->self->dev.of_node = np; + else + bus->dev.of_node = np; + + for_each_child_of_node(np, child) { + struct pci_dev *dev; + u32 devfn; + + prop = of_get_property(child, "reg", NULL); + if (!prop) + continue; + + devfn = (be32_to_cpup(prop) >> 8) & 0xff; + dev = pci_get_slot(bus, devfn); + if (!dev) + continue; + dev->dev.of_node = child; + pci_dev_put(dev); + } + } +} +#endif + static void __init dtb_setup_hpet(void) { struct device_node *dn; -- cgit v1.2.3-18-g5258 From 9079b35364e75ce6b968a179f861d2f819f33e61 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 22 Feb 2011 21:07:43 +0100 Subject: x86: dtb: Add generic bus probe For now we probe these busses and we change this to board dependent probes once we have to. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Dirk Brandewie Acked-by: Grant Likely Cc: sodaville@linutronix.de Cc: devicetree-discuss@lists.ozlabs.org LKML-Reference: <1298405266-1624-9-git-send-email-bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner --- arch/x86/kernel/devicetree.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c index 7b574226e0a..0bc83bfa4ea 100644 --- a/arch/x86/kernel/devicetree.c +++ b/arch/x86/kernel/devicetree.c @@ -103,6 +103,25 @@ void __init add_dtb(u64 data) initial_dtb = data + offsetof(struct setup_data, data); } +/* + * CE4100 ids. Will be moved to machine_device_initcall() once we have it. + */ +static struct of_device_id __initdata ce4100_ids[] = { + { .compatible = "intel,ce4100-cp", }, + { .compatible = "isa", }, + { .compatible = "pci", }, + {}, +}; + +static int __init add_bus_probe(void) +{ + if (!initial_boot_params) + return 0; + + return of_platform_bus_probe(NULL, ce4100_ids, NULL); +} +module_init(add_bus_probe); + #ifdef CONFIG_PCI static int x86_of_pci_irq_enable(struct pci_dev *dev) { -- cgit v1.2.3-18-g5258 From bcc7c1244fcfd852b9f4590935491057e1cab9dd Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 22 Feb 2011 21:07:44 +0100 Subject: x86: ioapic: Add OF bindings for IO_APIC ioapic_xlate provides a translation from the information in device tree to ioapic related informations. This includes - obtaining hw irq which is the vector number "=> pin number + gsi" - obtaining type (level/edge/..) - programming this information into ioapic ioapic_add_ofnode adds an irq_domain based on informations from the device tree. This information (irq_domain) is required in order to map a device to its proper interrupt controller. [ tglx: Adapted to the io_apic changes, which let us move that whole code to devicetree.c ] Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Dirk Brandewie Acked-by: Grant Likely Cc: sodaville@linutronix.de Cc: devicetree-discuss@lists.ozlabs.org LKML-Reference: <1298405266-1624-10-git-send-email-bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner --- arch/x86/include/asm/prom.h | 2 + arch/x86/kernel/devicetree.c | 104 +++++++++++++++++++++++++++++++++++++++++++ arch/x86/kernel/irqinit.c | 6 +++ 3 files changed, 112 insertions(+) (limited to 'arch') diff --git a/arch/x86/include/asm/prom.h b/arch/x86/include/asm/prom.h index 8fcd519a44d..ae50131ad76 100644 --- a/arch/x86/include/asm/prom.h +++ b/arch/x86/include/asm/prom.h @@ -27,6 +27,7 @@ extern int of_ioapic; extern u64 initial_dtb; extern void add_dtb(u64 data); +extern void x86_add_irq_domains(void); void x86_dtb_find_config(void); void x86_dtb_get_config(unsigned int unused); void add_interrupt_host(struct irq_domain *ih); @@ -44,6 +45,7 @@ static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus) #else static inline void add_dtb(u64 data) { } +static inline void x86_add_irq_domains(void) { } static inline void x86_of_pci_init(void) { } #define x86_dtb_find_config x86_init_noop #define x86_dtb_get_config x86_init_uint_noop diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c index 0bc83bfa4ea..2d65897a39d 100644 --- a/arch/x86/kernel/devicetree.c +++ b/arch/x86/kernel/devicetree.c @@ -320,3 +320,107 @@ void __init x86_dtb_get_config(unsigned int unused) dtb_setup_hpet(); dtb_apic_setup(); } + +#ifdef CONFIG_X86_IO_APIC + +struct of_ioapic_type { + u32 out_type; + u32 trigger; + u32 polarity; +}; + +static struct of_ioapic_type of_ioapic_type[] = +{ + { + .out_type = IRQ_TYPE_EDGE_RISING, + .trigger = IOAPIC_EDGE, + .polarity = 1, + }, + { + .out_type = IRQ_TYPE_LEVEL_LOW, + .trigger = IOAPIC_LEVEL, + .polarity = 0, + }, + { + .out_type = IRQ_TYPE_LEVEL_HIGH, + .trigger = IOAPIC_LEVEL, + .polarity = 1, + }, + { + .out_type = IRQ_TYPE_EDGE_FALLING, + .trigger = IOAPIC_EDGE, + .polarity = 0, + }, +}; + +static int ioapic_xlate(struct irq_domain *id, const u32 *intspec, u32 intsize, + u32 *out_hwirq, u32 *out_type) +{ + struct io_apic_irq_attr attr; + struct of_ioapic_type *it; + u32 line, idx, type; + + if (intsize < 2) + return -EINVAL; + + line = *intspec; + idx = (u32) id->priv; + *out_hwirq = line + mp_gsi_routing[idx].gsi_base; + + intspec++; + type = *intspec; + + if (type >= ARRAY_SIZE(of_ioapic_type)) + return -EINVAL; + + it = of_ioapic_type + type; + *out_type = it->out_type; + + set_io_apic_irq_attr(&attr, idx, line, it->trigger, it->polarity); + + return io_apic_setup_irq_pin(*out_hwirq, cpu_to_node(0), &attr); +} + +static void __init ioapic_add_ofnode(struct device_node *np) +{ + struct resource r; + int i, ret; + + ret = of_address_to_resource(np, 0, &r); + if (ret) { + printk(KERN_ERR "Failed to obtain address for %s\n", + np->full_name); + return; + } + + for (i = 0; i < nr_ioapics; i++) { + if (r.start == mp_ioapics[i].apicaddr) { + struct irq_domain *id; + + id = kzalloc(sizeof(*id), GFP_KERNEL); + BUG_ON(!id); + id->controller = np; + id->xlate = ioapic_xlate; + id->priv = (void *)i; + add_interrupt_host(id); + return; + } + } + printk(KERN_ERR "IOxAPIC at %s is not registered.\n", np->full_name); +} + +void __init x86_add_irq_domains(void) +{ + struct device_node *dp; + + if (!initial_boot_params) + return; + + for_each_node_with_property(dp, "interrupt-controller") { + if (of_device_is_compatible(dp, "intel,ce4100-ioapic")) + ioapic_add_ofnode(dp); + } +} +#else +void __init x86_add_irq_domains(void) { } +#endif diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c index 4cadf8688db..9f76f89f43a 100644 --- a/arch/x86/kernel/irqinit.c +++ b/arch/x86/kernel/irqinit.c @@ -118,6 +118,12 @@ void __init init_IRQ(void) { int i; + /* + * We probably need a better place for this, but it works for + * now ... + */ + x86_add_irq_domains(); + /* * On cpu 0, Assign IRQ0_VECTOR..IRQ15_VECTOR's to IRQ 0..15. * If these IRQ's are handled by legacy interrupt-controllers like PIC, -- cgit v1.2.3-18-g5258 From 1fa4163bdc199a0b80f9e333d718b3f65e901593 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 22 Feb 2011 21:07:45 +0100 Subject: x86: ce4100: Use OF to setup devices Use device tree information to setup IO_APIC configuration, interrupt routing, HPET and everything else which cannot be enumerated by other means. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Dirk Brandewie Acked-by: Grant Likely Cc: sodaville@linutronix.de Cc: devicetree-discuss@lists.ozlabs.org LKML-Reference: <1298405266-1624-11-git-send-email-bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner --- arch/x86/platform/ce4100/ce4100.c | 26 +++++++++++++++++++------- 1 file changed, 19 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/x86/platform/ce4100/ce4100.c b/arch/x86/platform/ce4100/ce4100.c index d2c0d51a717..b3436d344b4 100644 --- a/arch/x86/platform/ce4100/ce4100.c +++ b/arch/x86/platform/ce4100/ce4100.c @@ -15,21 +15,19 @@ #include #include +#include #include +#include #include +#include static int ce4100_i8042_detect(void) { return 0; } -static void __init sdv_find_smp_config(void) -{ -} - #ifdef CONFIG_SERIAL_8250 - static unsigned int mem_serial_in(struct uart_port *p, int offset) { offset = offset << p->regshift; @@ -118,6 +116,15 @@ static void __init sdv_arch_setup(void) sdv_serial_fixup(); } +#ifdef CONFIG_X86_IO_APIC +static void __cpuinit sdv_pci_init(void) +{ + x86_of_pci_init(); + /* We can't set this earlier, because we need to calibrate the timer */ + legacy_pic = &null_legacy_pic; +} +#endif + /* * CE4100 specific x86_init function overrides and early setup * calls. @@ -127,6 +134,11 @@ void __init x86_ce4100_early_setup(void) x86_init.oem.arch_setup = sdv_arch_setup; x86_platform.i8042_detect = ce4100_i8042_detect; x86_init.resources.probe_roms = x86_init_noop; - x86_init.mpparse.get_smp_config = x86_init_uint_noop; - x86_init.mpparse.find_smp_config = sdv_find_smp_config; + x86_init.mpparse.get_smp_config = x86_dtb_get_config; + x86_init.mpparse.find_smp_config = x86_dtb_find_config; + +#ifdef CONFIG_X86_IO_APIC + x86_init.pci.init_irq = sdv_pci_init; + x86_init.mpparse.setup_ioapic_ids = setup_ioapic_ids_from_mpc_nocheck; +#endif } -- cgit v1.2.3-18-g5258 From 3bcbaf6e08d8d82cde781997bd2c56dda87049b5 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 22 Feb 2011 21:07:46 +0100 Subject: rtc: cmos: Add OF bindings This allows to load the OF driver based informations from the device tree. Systems without BIOS may need to perform some initialization. PowerPC creates a PNP device from the OF information and performs this kind of initialization in their private PCI quirk. This looks more generic. This patch also avoids registering the platform RTC driver on X86 if we have a device tree blob. Otherwise we would setup the device based on the hardcoded information in arch/x86 rather than the device tree based one. [ tglx: Changed "int of_have_populated_dt()" to bool as recommended by Grant ] Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Dirk Brandewie Acked-by: Grant Likely Cc: sodaville@linutronix.de Cc: devicetree-discuss@lists.ozlabs.org Cc: rtc-linux@googlegroups.com Cc: Alessandro Zummo LKML-Reference: <1298405266-1624-12-git-send-email-bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner --- arch/x86/kernel/rtc.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c index 6f39cab052d..3f2ad2640d8 100644 --- a/arch/x86/kernel/rtc.c +++ b/arch/x86/kernel/rtc.c @@ -6,6 +6,7 @@ #include #include #include +#include #include #include @@ -236,6 +237,8 @@ static __init int add_rtc_cmos(void) } } #endif + if (of_have_populated_dt()) + return 0; platform_device_register(&rtc_device); dev_info(&rtc_device.dev, -- cgit v1.2.3-18-g5258 From dc54c23bb0e29de1bcaa40dbeffbc6cac641fb22 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Wed, 23 Feb 2011 10:41:29 -0700 Subject: ARM: Tegra: Make tegra_dma_init a postcore_initcall The following commit makes the Tegra APB DMA engine fail to initialize correctly: 0cf6230af909a86f81907455eca2a5c9b8f68fe6 ARM: tegra: Move tegra_common_init to tegra_init_early The reason is that tegra_init_early_ calls tegra_dma_init which calls request_threaded_irq, which fails since the IRQ hasn't yet been marked valid; that only happens in tegra_init_irq, which gets called after tegra_init_early. This used to work OK, since tegra_init_early was tegra_common_init, which got called after tegra_init_irq, basically from the beginning of tegra_harmony_init. Solve this by converting tegra_dma_init to a postcore_initcall. This makes it execute late enough that IRQs are marked valid, and avoids having to add it back to every machine's init function. Signed-off-by: Stephen Warren Signed-off-by: Colin Cross --- arch/arm/mach-tegra/common.c | 4 ---- arch/arm/mach-tegra/dma.c | 1 + 2 files changed, 1 insertion(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c index 516e1000ebb..d5e3f89b05a 100644 --- a/arch/arm/mach-tegra/common.c +++ b/arch/arm/mach-tegra/common.c @@ -25,7 +25,6 @@ #include #include -#include #include #include "board.h" @@ -81,7 +80,4 @@ void __init tegra_init_early(void) tegra_init_clock(); tegra_clk_init_from_table(common_clk_init_table); tegra_init_cache(); -#ifdef CONFIG_TEGRA_SYSTEM_DMA - tegra_dma_init(); -#endif } diff --git a/arch/arm/mach-tegra/dma.c b/arch/arm/mach-tegra/dma.c index 2d720f2b6c7..bd4f62a613a 100644 --- a/arch/arm/mach-tegra/dma.c +++ b/arch/arm/mach-tegra/dma.c @@ -743,6 +743,7 @@ fail: } return ret; } +postcore_initcall(tegra_dma_init); #ifdef CONFIG_PM static u32 apb_dma[5*TEGRA_SYSTEM_DMA_CH_NR + 3]; -- cgit v1.2.3-18-g5258 From 3c106bf5b3e59e1fc8e0dfcd7a620cfed7a98430 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Wed, 23 Feb 2011 11:58:49 -0700 Subject: ARM: Tegra: Rename I2S clocks to match driver name The driver is tegra-i2s not just i2s. Rename the clocks to match, so that clk_get_sys can look up by driver name. Signed-off-by: Stephen Warren Signed-off-by: Colin Cross --- arch/arm/mach-tegra/tegra2_clocks.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c index 3015a2c6425..ee3f9d76dcb 100644 --- a/arch/arm/mach-tegra/tegra2_clocks.c +++ b/arch/arm/mach-tegra/tegra2_clocks.c @@ -2128,8 +2128,8 @@ struct clk tegra_list_clks[] = { PERIPH_CLK("apbdma", "tegra-dma", NULL, 34, 0, 108000000, mux_pclk, 0), PERIPH_CLK("rtc", "rtc-tegra", NULL, 4, 0, 32768, mux_clk_32k, PERIPH_NO_RESET), PERIPH_CLK("timer", "timer", NULL, 5, 0, 26000000, mux_clk_m, 0), - PERIPH_CLK("i2s1", "i2s.0", NULL, 11, 0x100, 26000000, mux_pllaout0_audio2x_pllp_clkm, MUX | DIV_U71), - PERIPH_CLK("i2s2", "i2s.1", NULL, 18, 0x104, 26000000, mux_pllaout0_audio2x_pllp_clkm, MUX | DIV_U71), + PERIPH_CLK("i2s1", "tegra-i2s.0", NULL, 11, 0x100, 26000000, mux_pllaout0_audio2x_pllp_clkm, MUX | DIV_U71), + PERIPH_CLK("i2s2", "tegra-i2s.1", NULL, 18, 0x104, 26000000, mux_pllaout0_audio2x_pllp_clkm, MUX | DIV_U71), PERIPH_CLK("spdif_out", "spdif_out", NULL, 10, 0x108, 100000000, mux_pllaout0_audio2x_pllp_clkm, MUX | DIV_U71), PERIPH_CLK("spdif_in", "spdif_in", NULL, 10, 0x10c, 100000000, mux_pllp_pllc_pllm, MUX | DIV_U71), PERIPH_CLK("pwm", "pwm", NULL, 17, 0x110, 432000000, mux_pllp_pllc_audio_clkm_clk32, MUX | DIV_U71), -- cgit v1.2.3-18-g5258 From ddb7d5d80edb58e8235f1bc6c350eac40bfe85d1 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Wed, 23 Feb 2011 11:58:50 -0700 Subject: ARM: Tegra: Rename clk_dev1/2 to cdev1/2 The ASoC machine driver was written assuming my previous patch to add complete support for these clocks, which named them cdev1/2. Rename the clocks to match that, to avoid churn in the ASoC driver. This rename also makes the clocks more consistent with other Tegra clocks irrespective of any of that. Signed-off-by: Stephen Warren Signed-off-by: Colin Cross --- arch/arm/mach-tegra/tegra2_clocks.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c index ee3f9d76dcb..6d7c4eea4dc 100644 --- a/arch/arm/mach-tegra/tegra2_clocks.c +++ b/arch/arm/mach-tegra/tegra2_clocks.c @@ -1823,8 +1823,8 @@ static struct clk tegra_clk_d = { }; /* dap_mclk1, belongs to the cdev1 pingroup. */ -static struct clk tegra_dev1_clk = { - .name = "clk_dev1", +static struct clk tegra_clk_cdev1 = { + .name = "cdev1", .ops = &tegra_cdev_clk_ops, .rate = 26000000, .max_rate = 26000000, @@ -1834,8 +1834,8 @@ static struct clk tegra_dev1_clk = { }; /* dap_mclk2, belongs to the cdev2 pingroup. */ -static struct clk tegra_dev2_clk = { - .name = "clk_dev2", +static struct clk tegra_clk_cdev2 = { + .name = "cdev2", .ops = &tegra_cdev_clk_ops, .rate = 26000000, .max_rate = 26000000, @@ -2276,8 +2276,8 @@ struct clk *tegra_ptr_clks[] = { &tegra_clk_hclk, &tegra_clk_pclk, &tegra_clk_d, - &tegra_dev1_clk, - &tegra_dev2_clk, + &tegra_clk_cdev1, + &tegra_clk_cdev2, &tegra_clk_virtual_cpu, &tegra_clk_blink, &tegra_clk_cop, -- cgit v1.2.3-18-g5258 From ccac05152e7c6a8103b9e7a801bc995180a800fc Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Wed, 23 Feb 2011 14:49:30 -0700 Subject: ARM: Tegra: DMA: Fail safe if initialization fails tegra_dma_init currently simply bails out early if any initialization fails. This skips various data-structure initialization. In turn, this means that tegra_dma_allocate_channel can still hand out channels. In this case, when tegra_dma_free_channel is called, which calls tegra_dma_cancel, the walking on ch->list will OOPS since the list's next/prev pointers may still be NULL. To solve this, add an explicit "initialized" flag, only set this once _init has fully completed successfully, and have _allocate_channel refuse to hand out channels if this is not set. While at it, simplify _init: * Remove redundant memsets * Use bitmap_fill to mark all channels as in-use up-front, and remove some now-redundant bitmap initialization loops. * Only mark a channel as free once all channel-related initialization has completed. Finally, the successful exit path from _init always has ret==0, so just hard-code that return. The error path still returns ret. Signed-off-by: Stephen Warren Signed-off-by: Colin Cross --- arch/arm/mach-tegra/dma.c | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/dma.c b/arch/arm/mach-tegra/dma.c index bd4f62a613a..e945ae28ee7 100644 --- a/arch/arm/mach-tegra/dma.c +++ b/arch/arm/mach-tegra/dma.c @@ -127,6 +127,7 @@ struct tegra_dma_channel { #define NV_DMA_MAX_CHANNELS 32 +static bool tegra_dma_initialized; static DEFINE_MUTEX(tegra_dma_lock); static DECLARE_BITMAP(channel_usage, NV_DMA_MAX_CHANNELS); @@ -352,6 +353,9 @@ struct tegra_dma_channel *tegra_dma_allocate_channel(int mode) int channel; struct tegra_dma_channel *ch = NULL; + if (WARN_ON(!tegra_dma_initialized)) + return NULL; + mutex_lock(&tegra_dma_lock); /* first channel is the shared channel */ @@ -678,6 +682,8 @@ int __init tegra_dma_init(void) void __iomem *addr; struct clk *c; + bitmap_fill(channel_usage, NV_DMA_MAX_CHANNELS); + c = clk_get_sys("tegra-dma", NULL); if (IS_ERR(c)) { pr_err("Unable to get clock for APB DMA\n"); @@ -696,18 +702,9 @@ int __init tegra_dma_init(void) writel(0xFFFFFFFFul >> (31 - TEGRA_SYSTEM_DMA_CH_MAX), addr + APB_DMA_IRQ_MASK_SET); - memset(channel_usage, 0, sizeof(channel_usage)); - memset(dma_channels, 0, sizeof(dma_channels)); - - /* Reserve all the channels we are not supposed to touch */ - for (i = 0; i < TEGRA_SYSTEM_DMA_CH_MIN; i++) - __set_bit(i, channel_usage); - for (i = TEGRA_SYSTEM_DMA_CH_MIN; i <= TEGRA_SYSTEM_DMA_CH_MAX; i++) { struct tegra_dma_channel *ch = &dma_channels[i]; - __clear_bit(i, channel_usage); - ch->id = i; snprintf(ch->name, TEGRA_DMA_NAME_SIZE, "dma_channel_%d", i); @@ -726,14 +723,15 @@ int __init tegra_dma_init(void) goto fail; } ch->irq = irq; + + __clear_bit(i, channel_usage); } /* mark the shared channel allocated */ __set_bit(TEGRA_SYSTEM_DMA_CH_MIN, channel_usage); - for (i = TEGRA_SYSTEM_DMA_CH_MAX+1; i < NV_DMA_MAX_CHANNELS; i++) - __set_bit(i, channel_usage); + tegra_dma_initialized = true; - return ret; + return 0; fail: writel(0, addr + APB_DMA_GEN); for (i = TEGRA_SYSTEM_DMA_CH_MIN; i <= TEGRA_SYSTEM_DMA_CH_MAX; i++) { -- cgit v1.2.3-18-g5258 From 9b8306c6f5dc4c1dcf78f25f622720944a1fb736 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Thu, 24 Feb 2011 10:03:54 +0900 Subject: ARM: S5PV210: Disable unused power regulators on GONI board A lot of power regulator has been enabled by default causing the board to consume a lot of power. This patch fixes this issue. Signed-off-by: Marek Szyprowski Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pv210/mach-goni.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index 788599a37a7..9d02dd11c3c 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -306,7 +306,6 @@ static struct regulator_init_data goni_ldo3_data = { .min_uV = 1100000, .max_uV = 1100000, .apply_uV = 1, - .always_on = 1, }, }; @@ -325,6 +324,7 @@ static struct regulator_init_data goni_ldo5_data = { .min_uV = 2800000, .max_uV = 2800000, .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = ARRAY_SIZE(goni_ldo5_consumers), .consumer_supplies = goni_ldo5_consumers, @@ -355,7 +355,6 @@ static struct regulator_init_data goni_ldo8_data = { .min_uV = 3300000, .max_uV = 3300000, .apply_uV = 1, - .always_on = 1, }, }; @@ -365,7 +364,6 @@ static struct regulator_init_data goni_ldo9_data = { .min_uV = 2800000, .max_uV = 2800000, .apply_uV = 1, - .always_on = 1, }, }; @@ -397,7 +395,6 @@ static struct regulator_init_data goni_ldo12_data = { .min_uV = 1200000, .max_uV = 1200000, .apply_uV = 1, - .always_on = 1, }, }; @@ -431,7 +428,6 @@ static struct regulator_init_data goni_ldo15_data = { .min_uV = 3300000, .max_uV = 3300000, .apply_uV = 1, - .always_on = 1, }, }; @@ -441,7 +437,6 @@ static struct regulator_init_data goni_ldo16_data = { .min_uV = 1800000, .max_uV = 1800000, .apply_uV = 1, - .always_on = 1, }, }; -- cgit v1.2.3-18-g5258 From 1d017fee97da8e291f521537c49a324ad3becd61 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Thu, 24 Feb 2011 10:06:25 +0900 Subject: ARM: S5PV210: Add power consumers for hsotg for GONI board This patch adds definitions for power consumers for s3c-hsotg driver on Goni board. The consumers are defined as arrays, because later more entries for MIPI and ADC will be defined. Signed-off-by: Marek Szyprowski Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pv210/mach-goni.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index 9d02dd11c3c..a431742884c 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -271,10 +271,18 @@ static void __init goni_tsp_init(void) /* MAX8998 regulators */ #if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE) +static struct regulator_consumer_supply goni_ldo3_consumers[] = { + REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"), +}; + static struct regulator_consumer_supply goni_ldo5_consumers[] = { REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"), }; +static struct regulator_consumer_supply goni_ldo8_consumers[] = { + REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"), +}; + static struct regulator_consumer_supply goni_ldo11_consumers[] = { REGULATOR_SUPPLY("vddio", "0-0030"), /* "CAM_IO_2.8V" */ }; @@ -306,7 +314,10 @@ static struct regulator_init_data goni_ldo3_data = { .min_uV = 1100000, .max_uV = 1100000, .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(goni_ldo3_consumers), + .consumer_supplies = goni_ldo3_consumers, }; static struct regulator_init_data goni_ldo4_data = { @@ -355,7 +366,10 @@ static struct regulator_init_data goni_ldo8_data = { .min_uV = 3300000, .max_uV = 3300000, .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(goni_ldo8_consumers), + .consumer_supplies = goni_ldo8_consumers, }; static struct regulator_init_data goni_ldo9_data = { -- cgit v1.2.3-18-g5258 From 7b62dbec908a29f448047099bedb5c64c9cb8808 Mon Sep 17 00:00:00 2001 From: Jacob Pan Date: Wed, 23 Feb 2011 16:07:26 -0800 Subject: x86/mrst: Fix apb timer rating when lapic timer is used Need to adjust the clockevent device rating for the structure that will be registered with clockevent system instead of the temporary structure. Without this fix, APB timer rating will be higher than LAPIC timer such that it can not be released later to be used as the broadcast timer. Signed-off-by: Jacob Pan Cc: Arjan van de Ven Cc: Alan Cox Cc: Thomas Gleixner Cc: John Stultz LKML-Reference: <1298506046-439-1-git-send-email-jacob.jun.pan@linux.intel.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apb_timer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c index 51ef31a89be..51d4e166306 100644 --- a/arch/x86/kernel/apb_timer.c +++ b/arch/x86/kernel/apb_timer.c @@ -284,7 +284,7 @@ static int __init apbt_clockevent_register(void) memcpy(&adev->evt, &apbt_clockevent, sizeof(struct clock_event_device)); if (mrst_timer_options == MRST_TIMER_LAPIC_APBT) { - apbt_clockevent.rating = APBT_CLOCKEVENT_RATING - 100; + adev->evt.rating = APBT_CLOCKEVENT_RATING - 100; global_clock_event = &adev->evt; printk(KERN_DEBUG "%s clockevent registered as global\n", global_clock_event->name); -- cgit v1.2.3-18-g5258 From 4a66b1d95ad8baf6ab884a1c64461449b463eb78 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Thu, 24 Feb 2011 09:52:42 +0100 Subject: x86: dt: Fix OLPC=y/INTEL_CE=n build Both OLPC and CE4100 activate CONFIG_OF. OLPC uses PROMTREE while CE uses FLATTREE. Compiling for OLPC only breaks due to missing flat tree functions and variables. Use proper wrappers and provide an empty x86_flattree_get_config() inline so OF=y FLATTREE=n builds and works. [ tglx: Make it work with HPET_TIMER=n and make a function static ] Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Thomas Gleixner --- arch/x86/include/asm/prom.h | 1 - arch/x86/kernel/devicetree.c | 23 +++++++++++++++++++---- 2 files changed, 19 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/prom.h b/arch/x86/include/asm/prom.h index ae50131ad76..f58361ba735 100644 --- a/arch/x86/include/asm/prom.h +++ b/arch/x86/include/asm/prom.h @@ -30,7 +30,6 @@ extern void add_dtb(u64 data); extern void x86_add_irq_domains(void); void x86_dtb_find_config(void); void x86_dtb_get_config(unsigned int unused); -void add_interrupt_host(struct irq_domain *ih); void __cpuinit x86_of_pci_init(void); static inline struct device_node *pci_device_to_OF_node(struct pci_dev *pdev) diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c index 2d65897a39d..06e5e91939c 100644 --- a/arch/x86/kernel/devicetree.c +++ b/arch/x86/kernel/devicetree.c @@ -26,7 +26,7 @@ static DEFINE_RAW_SPINLOCK(big_irq_lock); int __initdata of_ioapic; -void add_interrupt_host(struct irq_domain *ih) +static void add_interrupt_host(struct irq_domain *ih) { unsigned long flags; @@ -115,7 +115,7 @@ static struct of_device_id __initdata ce4100_ids[] = { static int __init add_bus_probe(void) { - if (!initial_boot_params) + if (!of_have_populated_dt()) return 0; return of_platform_bus_probe(NULL, ce4100_ids, NULL); @@ -203,6 +203,7 @@ void __cpuinit x86_of_pci_init(void) static void __init dtb_setup_hpet(void) { +#ifdef CONFIG_HPET_TIMER struct device_node *dn; struct resource r; int ret; @@ -216,6 +217,7 @@ static void __init dtb_setup_hpet(void) return; } hpet_address = r.start; +#endif } static void __init dtb_lapic_setup(void) @@ -288,7 +290,8 @@ void __init x86_dtb_find_config(void) printk(KERN_ERR "Missing device tree!.\n"); } -void __init x86_dtb_get_config(unsigned int unused) +#ifdef CONFIG_OF_FLATTREE +static void __init x86_flattree_get_config(void) { u32 size, map_len; void *new_dtb; @@ -317,6 +320,18 @@ void __init x86_dtb_get_config(unsigned int unused) of_scan_flat_dt(early_init_dt_scan_root, NULL); unflatten_device_tree(); +} +#else +static inline void x86_flattree_get_config(void) { } +#endif + +void __init x86_dtb_get_config(unsigned int unused) +{ + x86_flattree_get_config(); + + if (!of_have_populated_dt()) + return; + dtb_setup_hpet(); dtb_apic_setup(); } @@ -413,7 +428,7 @@ void __init x86_add_irq_domains(void) { struct device_node *dp; - if (!initial_boot_params) + if (!of_have_populated_dt()) return; for_each_node_with_property(dp, "interrupt-controller") { -- cgit v1.2.3-18-g5258 From d1b19426b04787e48f2689923e28d37b488969b0 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 24 Feb 2011 14:46:24 +0100 Subject: x86: Rename e820_table_* to pgt_buf_* e820_table_{start|end|top}, which are used to buffer page table allocation during early boot, are now derived from memblock and don't have much to do with e820. Change the names so that they reflect what they're used for. This patch doesn't introduce any behavior change. -v2: Ingo found that earlier patch "x86: Use early pre-allocated page table buffer top-down" caused crash on 32bit and needed to be dropped. This patch was updated to reflect the change. -tj: Updated commit description. Signed-off-by: Yinghai Lu Signed-off-by: Tejun Heo --- arch/x86/include/asm/init.h | 6 +++--- arch/x86/mm/init.c | 20 ++++++++++---------- arch/x86/mm/init_32.c | 8 ++++---- arch/x86/mm/init_64.c | 4 ++-- arch/x86/xen/mmu.c | 2 +- 5 files changed, 20 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/init.h b/arch/x86/include/asm/init.h index 36fb1a6a510..8dbe353e41e 100644 --- a/arch/x86/include/asm/init.h +++ b/arch/x86/include/asm/init.h @@ -11,8 +11,8 @@ kernel_physical_mapping_init(unsigned long start, unsigned long page_size_mask); -extern unsigned long __initdata e820_table_start; -extern unsigned long __meminitdata e820_table_end; -extern unsigned long __meminitdata e820_table_top; +extern unsigned long __initdata pgt_buf_start; +extern unsigned long __meminitdata pgt_buf_end; +extern unsigned long __meminitdata pgt_buf_top; #endif /* _ASM_X86_INIT_32_H */ diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index b8054e087ea..286d289b039 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -18,9 +18,9 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); -unsigned long __initdata e820_table_start; -unsigned long __meminitdata e820_table_end; -unsigned long __meminitdata e820_table_top; +unsigned long __initdata pgt_buf_start; +unsigned long __meminitdata pgt_buf_end; +unsigned long __meminitdata pgt_buf_top; int after_bootmem; @@ -73,12 +73,12 @@ static void __init find_early_table_space(unsigned long end, int use_pse, if (base == MEMBLOCK_ERROR) panic("Cannot find space for the kernel page tables"); - e820_table_start = base >> PAGE_SHIFT; - e820_table_end = e820_table_start; - e820_table_top = e820_table_start + (tables >> PAGE_SHIFT); + pgt_buf_start = base >> PAGE_SHIFT; + pgt_buf_end = pgt_buf_start; + pgt_buf_top = pgt_buf_start + (tables >> PAGE_SHIFT); printk(KERN_DEBUG "kernel direct mapping tables up to %lx @ %lx-%lx\n", - end, e820_table_start << PAGE_SHIFT, e820_table_top << PAGE_SHIFT); + end, pgt_buf_start << PAGE_SHIFT, pgt_buf_top << PAGE_SHIFT); } struct map_range { @@ -272,9 +272,9 @@ unsigned long __init_refok init_memory_mapping(unsigned long start, __flush_tlb_all(); - if (!after_bootmem && e820_table_end > e820_table_start) - memblock_x86_reserve_range(e820_table_start << PAGE_SHIFT, - e820_table_end << PAGE_SHIFT, "PGTABLE"); + if (!after_bootmem && pgt_buf_end > pgt_buf_start) + memblock_x86_reserve_range(pgt_buf_start << PAGE_SHIFT, + pgt_buf_end << PAGE_SHIFT, "PGTABLE"); if (!after_bootmem) early_memtest(start, end); diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c index 5d43fa5141c..73ad7ebd6e9 100644 --- a/arch/x86/mm/init_32.c +++ b/arch/x86/mm/init_32.c @@ -62,10 +62,10 @@ bool __read_mostly __vmalloc_start_set = false; static __init void *alloc_low_page(void) { - unsigned long pfn = e820_table_end++; + unsigned long pfn = pgt_buf_end++; void *adr; - if (pfn >= e820_table_top) + if (pfn >= pgt_buf_top) panic("alloc_low_page: ran out of memory"); adr = __va(pfn * PAGE_SIZE); @@ -163,8 +163,8 @@ static pte_t *__init page_table_kmap_check(pte_t *pte, pmd_t *pmd, if (pmd_idx_kmap_begin != pmd_idx_kmap_end && (vaddr >> PMD_SHIFT) >= pmd_idx_kmap_begin && (vaddr >> PMD_SHIFT) <= pmd_idx_kmap_end - && ((__pa(pte) >> PAGE_SHIFT) < e820_table_start - || (__pa(pte) >> PAGE_SHIFT) >= e820_table_end)) { + && ((__pa(pte) >> PAGE_SHIFT) < pgt_buf_start + || (__pa(pte) >> PAGE_SHIFT) >= pgt_buf_end)) { pte_t *newpte; int i; diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 4f1f461fc1e..470cc4704a9 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -314,7 +314,7 @@ void __init cleanup_highmap(void) static __ref void *alloc_low_page(unsigned long *phys) { - unsigned long pfn = e820_table_end++; + unsigned long pfn = pgt_buf_end++; void *adr; if (after_bootmem) { @@ -324,7 +324,7 @@ static __ref void *alloc_low_page(unsigned long *phys) return adr; } - if (pfn >= e820_table_top) + if (pfn >= pgt_buf_top) panic("alloc_low_page: ran out of memory"); adr = early_memremap(pfn * PAGE_SIZE, PAGE_SIZE); diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 5e92b61ad57..13783a18c6f 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -1443,7 +1443,7 @@ static __init pte_t mask_rw_pte(pte_t *ptep, pte_t pte) * early_ioremap fixmap slot, make sure it is RO. */ if (!is_early_ioremap_ptep(ptep) && - pfn >= e820_table_start && pfn < e820_table_end) + pfn >= pgt_buf_start && pfn < pgt_buf_end) pte = pte_wrprotect(pte); return pte; -- cgit v1.2.3-18-g5258 From c41b93fb8551148a93d3bba870365e8489317f02 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 8 Feb 2011 23:41:35 +0100 Subject: ACPI / PM: Drop acpi_restore_state_mem() The function acpi_restore_state_mem() has never been and most likely never will be used, so remove it. Signed-off-by: Rafael J. Wysocki --- arch/ia64/include/asm/acpi.h | 4 ++-- arch/ia64/kernel/acpi.c | 5 ----- arch/x86/include/asm/acpi.h | 3 +-- arch/x86/kernel/acpi/sleep.c | 8 -------- 4 files changed, 3 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/ia64/include/asm/acpi.h b/arch/ia64/include/asm/acpi.h index 837dc82a013..db3986a71af 100644 --- a/arch/ia64/include/asm/acpi.h +++ b/arch/ia64/include/asm/acpi.h @@ -128,9 +128,9 @@ static inline const char *acpi_get_sysname (void) int acpi_request_vector (u32 int_type); int acpi_gsi_to_irq (u32 gsi, unsigned int *irq); -/* routines for saving/restoring kernel state */ +/* Routine for saving kernel state during suspend. */ extern int acpi_save_state_mem(void); -extern void acpi_restore_state_mem(void); + extern unsigned long acpi_wakeup_address; /* diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 90ebceb899a..7cf2d10c067 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -1040,11 +1040,6 @@ EXPORT_SYMBOL(acpi_unregister_ioapic); */ int acpi_save_state_mem(void) { return 0; } -/* - * acpi_restore_state() - */ -void acpi_restore_state_mem(void) {} - /* * do_suspend_lowlevel() */ diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h index 211ca3f7fd1..47981f0d121 100644 --- a/arch/x86/include/asm/acpi.h +++ b/arch/x86/include/asm/acpi.h @@ -112,9 +112,8 @@ static inline void acpi_disable_pci(void) acpi_noirq_set(); } -/* routines for saving/restoring kernel state */ +/* Routine for saving kernel state during suspend. */ extern int acpi_save_state_mem(void); -extern void acpi_restore_state_mem(void); extern unsigned long acpi_wakeup_address; diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index 68d1537b8c8..c27a483094b 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -110,14 +110,6 @@ int acpi_save_state_mem(void) return 0; } -/* - * acpi_restore_state - undo effects of acpi_save_state_mem - */ -void acpi_restore_state_mem(void) -{ -} - - /** * acpi_reserve_wakeup_memory - do _very_ early ACPI initialisation * -- cgit v1.2.3-18-g5258 From f1a2003e22f6b50ea21f7f4b38b38c5ebc9c8017 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 8 Feb 2011 23:42:22 +0100 Subject: ACPI / PM: Merge do_suspend_lowlevel() into acpi_save_state_mem() The function do_suspend_lowlevel() is specific to x86 and defined in assembly code, so it should be called from the x86 low-level suspend code rather than from acpi_suspend_enter(). Merge do_suspend_lowlevel() into the x86's acpi_save_state_mem() and change the name of the latter to acpi_suspend_lowlevel(), so that the function's purpose is better reflected by its name. Signed-off-by: Rafael J. Wysocki --- arch/ia64/include/asm/acpi.h | 4 ++-- arch/ia64/kernel/acpi.c | 9 ++------- arch/x86/include/asm/acpi.h | 4 ++-- arch/x86/kernel/acpi/sleep.c | 5 +++-- arch/x86/kernel/acpi/sleep.h | 2 ++ 5 files changed, 11 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/ia64/include/asm/acpi.h b/arch/ia64/include/asm/acpi.h index db3986a71af..a06dfb13d51 100644 --- a/arch/ia64/include/asm/acpi.h +++ b/arch/ia64/include/asm/acpi.h @@ -128,8 +128,8 @@ static inline const char *acpi_get_sysname (void) int acpi_request_vector (u32 int_type); int acpi_gsi_to_irq (u32 gsi, unsigned int *irq); -/* Routine for saving kernel state during suspend. */ -extern int acpi_save_state_mem(void); +/* Low-level suspend routine. */ +extern int acpi_suspend_lowlevel(void); extern unsigned long acpi_wakeup_address; diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 7cf2d10c067..a54d054ed4b 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -1034,13 +1034,8 @@ int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base) EXPORT_SYMBOL(acpi_unregister_ioapic); /* - * acpi_save_state_mem() - save kernel state + * acpi_suspend_lowlevel() - save kernel state and suspend. * * TBD when when IA64 starts to support suspend... */ -int acpi_save_state_mem(void) { return 0; } - -/* - * do_suspend_lowlevel() - */ -void do_suspend_lowlevel(void) {} +int acpi_suspend_lowlevel(void) { return 0; } diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h index 47981f0d121..aa92684aa67 100644 --- a/arch/x86/include/asm/acpi.h +++ b/arch/x86/include/asm/acpi.h @@ -112,8 +112,8 @@ static inline void acpi_disable_pci(void) acpi_noirq_set(); } -/* Routine for saving kernel state during suspend. */ -extern int acpi_save_state_mem(void); +/* Low-level suspend routine. */ +extern int acpi_suspend_lowlevel(void); extern unsigned long acpi_wakeup_address; diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index c27a483094b..5f1b747f6ef 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -29,14 +29,14 @@ static char temp_stack[4096]; #endif /** - * acpi_save_state_mem - save kernel state + * acpi_suspend_lowlevel - save kernel state * * Create an identity mapped page table and copy the wakeup routine to * low memory. * * Note that this is too late to change acpi_wakeup_address. */ -int acpi_save_state_mem(void) +int acpi_suspend_lowlevel(void) { struct wakeup_header *header; @@ -107,6 +107,7 @@ int acpi_save_state_mem(void) saved_magic = 0x123456789abcdef0L; #endif /* CONFIG_64BIT */ + do_suspend_lowlevel(); return 0; } diff --git a/arch/x86/kernel/acpi/sleep.h b/arch/x86/kernel/acpi/sleep.h index adbcbaa6f1d..31ce13f2029 100644 --- a/arch/x86/kernel/acpi/sleep.h +++ b/arch/x86/kernel/acpi/sleep.h @@ -14,3 +14,5 @@ extern char swsusp_pg_dir[PAGE_SIZE]; extern unsigned long acpi_copy_wakeup_routine(unsigned long); extern void wakeup_long64(void); + +extern void do_suspend_lowlevel(void); -- cgit v1.2.3-18-g5258 From 7f74f8f28a2bd9db9404f7d364e2097a0c42cc12 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Thu, 24 Feb 2011 15:53:46 +0100 Subject: x86 quirk: Fix polarity for IRQ0 pin2 override on SB800 systems On some SB800 systems polarity for IOAPIC pin2 is wrongly specified as low active by BIOS. This caused system hangs after resume from S3 when HPET was used in one-shot mode on such systems because a timer interrupt was missed (HPET signal is high active). For more details see: http://marc.info/?l=linux-kernel&m=129623757413868 Tested-by: Manoj Iyer Tested-by: Andre Przywara Signed-off-by: Andreas Herrmann Cc: Borislav Petkov Cc: stable@kernel.org # 37.x, 32.x LKML-Reference: <20110224145346.GD3658@alberich.amd.com> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/acpi.h | 1 + arch/x86/kernel/acpi/boot.c | 14 ++++++++++---- arch/x86/kernel/early-quirks.c | 16 +++++++--------- 3 files changed, 18 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h index 211ca3f7fd1..4ea15ca89b2 100644 --- a/arch/x86/include/asm/acpi.h +++ b/arch/x86/include/asm/acpi.h @@ -88,6 +88,7 @@ extern int acpi_disabled; extern int acpi_pci_disabled; extern int acpi_skip_timer_override; extern int acpi_use_timer_override; +extern int acpi_fix_pin2_polarity; extern u8 acpi_sci_flags; extern int acpi_sci_override_gsi; diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index b3a71137983..3e6e2d68f76 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -72,6 +72,7 @@ u8 acpi_sci_flags __initdata; int acpi_sci_override_gsi __initdata; int acpi_skip_timer_override __initdata; int acpi_use_timer_override __initdata; +int acpi_fix_pin2_polarity __initdata; #ifdef CONFIG_X86_LOCAL_APIC static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE; @@ -415,10 +416,15 @@ acpi_parse_int_src_ovr(struct acpi_subtable_header * header, return 0; } - if (acpi_skip_timer_override && - intsrc->source_irq == 0 && intsrc->global_irq == 2) { - printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n"); - return 0; + if (intsrc->source_irq == 0 && intsrc->global_irq == 2) { + if (acpi_skip_timer_override) { + printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n"); + return 0; + } + if (acpi_fix_pin2_polarity && (intsrc->inti_flags & ACPI_MADT_POLARITY_MASK)) { + intsrc->inti_flags &= ~ACPI_MADT_POLARITY_MASK; + printk(PREFIX "BIOS IRQ0 pin2 override: forcing polarity to high active.\n"); + } } mp_override_legacy_irq(intsrc->source_irq, diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c index 76b8cd953de..9efbdcc5642 100644 --- a/arch/x86/kernel/early-quirks.c +++ b/arch/x86/kernel/early-quirks.c @@ -143,15 +143,10 @@ static void __init ati_bugs(int num, int slot, int func) static u32 __init ati_sbx00_rev(int num, int slot, int func) { - u32 old, d; + u32 d; - d = read_pci_config(num, slot, func, 0x70); - old = d; - d &= ~(1<<8); - write_pci_config(num, slot, func, 0x70, d); d = read_pci_config(num, slot, func, 0x8); d &= 0xff; - write_pci_config(num, slot, func, 0x70, old); return d; } @@ -160,13 +155,16 @@ static void __init ati_bugs_contd(int num, int slot, int func) { u32 d, rev; - if (acpi_use_timer_override) - return; - rev = ati_sbx00_rev(num, slot, func); + if (rev >= 0x40) + acpi_fix_pin2_polarity = 1; + if (rev > 0x13) return; + if (acpi_use_timer_override) + return; + /* check for IRQ0 interrupt swap */ d = read_pci_config(num, slot, func, 0x64); if (!(d & (1<<14))) -- cgit v1.2.3-18-g5258 From cbc9438075ca9dee3f39a2e7310f81c304b40359 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 22 Feb 2011 19:59:49 -0700 Subject: OMAP2+: clocksource: fix crash on boot when !CONFIG_OMAP_32K_TIMER OMAP2+ kernels built without CONFIG_OMAP_32K_TIMER crash on boot after the 2.6.38 sched_clock changes: [ 0.000000] OMAP clockevent source: GPTIMER1 at 13000000 Hz [ 0.000000] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 0.000000] pgd = c0004000 [ 0.000000] [00000000] *pgd=00000000 [ 0.000000] Internal error: Oops: 80000005 [#1] SMP [ 0.000000] last sysfs file: [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 Not tainted (2.6.38-rc5-00057-g04aa67d #152) [ 0.000000] PC is at 0x0 [ 0.000000] LR is at sched_clock_poll+0x2c/0x3c Without CONFIG_OMAP_32K_TIMER, the kernel has an clockevent and clocksource resolution about three orders of magnitude higher than with CONFIG_OMAP_32K_TIMER set. The tradeoff is that the lowest power consumption states are not available. Fix by calling init_sched_clock() from the GPTIMER clocksource init code. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/timer-gp.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index 7b7c2683ae7..0fc550e7e48 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -39,6 +39,7 @@ #include #include #include +#include #include "timer-gp.h" @@ -190,6 +191,7 @@ static void __init omap2_gp_clocksource_init(void) /* * clocksource */ +static DEFINE_CLOCK_DATA(cd); static struct omap_dm_timer *gpt_clocksource; static cycle_t clocksource_read_cycles(struct clocksource *cs) { @@ -204,6 +206,15 @@ static struct clocksource clocksource_gpt = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; +static void notrace dmtimer_update_sched_clock(void) +{ + u32 cyc; + + cyc = omap_dm_timer_read_counter(gpt_clocksource); + + update_sched_clock(&cd, cyc, (u32)~0); +} + /* Setup free-running counter for clocksource */ static void __init omap2_gp_clocksource_init(void) { @@ -224,6 +235,8 @@ static void __init omap2_gp_clocksource_init(void) omap_dm_timer_set_load_start(gpt, 1, 0); + init_sched_clock(&cd, dmtimer_update_sched_clock, 32, tick_rate); + if (clocksource_register_hz(&clocksource_gpt, tick_rate)) printk(err2, clocksource_gpt.name); } -- cgit v1.2.3-18-g5258 From ef4815ab1ff10d642c21ef92faa6544934bc78d1 Mon Sep 17 00:00:00 2001 From: Martin Hostettler Date: Thu, 24 Feb 2011 12:51:31 -0800 Subject: omap: iommu: Gracefully fail iommu_enable if no arch_iommu is registered In a modular build of the iommu code it's possible that the arch iommu code isn't loaded when trying to enable the iommu. Instead of blindly following a null pointer return -NODEV in that case. Signed-off-by: Martin Hostettler Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/iommu.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c index b1107c08da5..3d8f55ea866 100644 --- a/arch/arm/plat-omap/iommu.c +++ b/arch/arm/plat-omap/iommu.c @@ -104,6 +104,9 @@ static int iommu_enable(struct iommu *obj) if (!obj) return -EINVAL; + if (!arch_iommu) + return -ENODEV; + clk_enable(obj->clk); err = arch_iommu->enable(obj); -- cgit v1.2.3-18-g5258 From 4111772900ba908e8be6f671013545f7aa41bc76 Mon Sep 17 00:00:00 2001 From: David Cohen Date: Thu, 24 Feb 2011 12:51:32 -0800 Subject: omap: iommu: print module name on error messages OMAP IOMMU generic layer doesn't need ot print function name during error messages. Print module name instead which is more useful. Signed-off-by: David Cohen Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/iommu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c index 3d8f55ea866..4b3218eaf3e 100644 --- a/arch/arm/plat-omap/iommu.c +++ b/arch/arm/plat-omap/iommu.c @@ -809,7 +809,7 @@ static irqreturn_t iommu_fault_handler(int irq, void *data) iopgd = iopgd_offset(obj, da); if (!iopgd_is_table(*iopgd)) { - dev_err(obj->dev, "%s: da:%08x pgd:%p *pgd:%08x\n", __func__, + dev_err(obj->dev, "%s: da:%08x pgd:%p *pgd:%08x\n", obj->name, da, iopgd, *iopgd); return IRQ_NONE; } @@ -817,7 +817,7 @@ static irqreturn_t iommu_fault_handler(int irq, void *data) iopte = iopte_offset(iopgd, da); dev_err(obj->dev, "%s: da:%08x pgd:%p *pgd:%08x pte:%p *pte:%08x\n", - __func__, da, iopgd, *iopgd, iopte, *iopte); + obj->name, da, iopgd, *iopgd, iopte, *iopte); return IRQ_NONE; } -- cgit v1.2.3-18-g5258 From fca1ab55f9a9f7e862a03a68c2b5577c15c344df Mon Sep 17 00:00:00 2001 From: Omar Ramirez Luna Date: Thu, 24 Feb 2011 12:51:32 -0800 Subject: OMAP2: hwmod data: add mailbox data Mailbox hwmod data for omap2430 and 2420. Signed-off-by: Omar Ramirez Luna Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod_2420_data.c | 73 ++++++++++++++++++++++++++++++ arch/arm/mach-omap2/omap_hwmod_2430_data.c | 72 +++++++++++++++++++++++++++++ 2 files changed, 145 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index f323c6bb22d..19ad9d053de 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -1207,6 +1207,76 @@ static struct omap_hwmod omap2420_dma_system_hwmod = { .flags = HWMOD_NO_IDLEST, }; +/* + * 'mailbox' class + * mailbox module allowing communication between the on-chip processors + * using a queued mailbox-interrupt mechanism. + */ + +static struct omap_hwmod_class_sysconfig omap2420_mailbox_sysc = { + .rev_offs = 0x000, + .sysc_offs = 0x010, + .syss_offs = 0x014, + .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2420_mailbox_hwmod_class = { + .name = "mailbox", + .sysc = &omap2420_mailbox_sysc, +}; + +/* mailbox */ +static struct omap_hwmod omap2420_mailbox_hwmod; +static struct omap_hwmod_irq_info omap2420_mailbox_irqs[] = { + { .name = "dsp", .irq = 26 }, + { .name = "iva", .irq = 34 }, +}; + +static struct omap_hwmod_addr_space omap2420_mailbox_addrs[] = { + { + .pa_start = 0x48094000, + .pa_end = 0x480941ff, + .flags = ADDR_TYPE_RT, + }, +}; + +/* l4_core -> mailbox */ +static struct omap_hwmod_ocp_if omap2420_l4_core__mailbox = { + .master = &omap2420_l4_core_hwmod, + .slave = &omap2420_mailbox_hwmod, + .addr = omap2420_mailbox_addrs, + .addr_cnt = ARRAY_SIZE(omap2420_mailbox_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mailbox slave ports */ +static struct omap_hwmod_ocp_if *omap2420_mailbox_slaves[] = { + &omap2420_l4_core__mailbox, +}; + +static struct omap_hwmod omap2420_mailbox_hwmod = { + .name = "mailbox", + .class = &omap2420_mailbox_hwmod_class, + .mpu_irqs = omap2420_mailbox_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2420_mailbox_irqs), + .main_clk = "mailboxes_ick", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_MAILBOXES_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_MAILBOXES_SHIFT, + }, + }, + .slaves = omap2420_mailbox_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_mailbox_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), +}; + /* * 'mcspi' class * multichannel serial port interface (mcspi) / master/slave synchronous serial @@ -1348,6 +1418,9 @@ static __initdata struct omap_hwmod *omap2420_hwmods[] = { /* dma_system class*/ &omap2420_dma_system_hwmod, + /* mailbox class */ + &omap2420_mailbox_hwmod, + /* mcspi class */ &omap2420_mcspi1_hwmod, &omap2420_mcspi2_hwmod, diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index de0015d3843..91d2581c770 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -1294,6 +1294,75 @@ static struct omap_hwmod omap2430_dma_system_hwmod = { .flags = HWMOD_NO_IDLEST, }; +/* + * 'mailbox' class + * mailbox module allowing communication between the on-chip processors + * using a queued mailbox-interrupt mechanism. + */ + +static struct omap_hwmod_class_sysconfig omap2430_mailbox_sysc = { + .rev_offs = 0x000, + .sysc_offs = 0x010, + .syss_offs = 0x014, + .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2430_mailbox_hwmod_class = { + .name = "mailbox", + .sysc = &omap2430_mailbox_sysc, +}; + +/* mailbox */ +static struct omap_hwmod omap2430_mailbox_hwmod; +static struct omap_hwmod_irq_info omap2430_mailbox_irqs[] = { + { .irq = 26 }, +}; + +static struct omap_hwmod_addr_space omap2430_mailbox_addrs[] = { + { + .pa_start = 0x48094000, + .pa_end = 0x480941ff, + .flags = ADDR_TYPE_RT, + }, +}; + +/* l4_core -> mailbox */ +static struct omap_hwmod_ocp_if omap2430_l4_core__mailbox = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_mailbox_hwmod, + .addr = omap2430_mailbox_addrs, + .addr_cnt = ARRAY_SIZE(omap2430_mailbox_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mailbox slave ports */ +static struct omap_hwmod_ocp_if *omap2430_mailbox_slaves[] = { + &omap2430_l4_core__mailbox, +}; + +static struct omap_hwmod omap2430_mailbox_hwmod = { + .name = "mailbox", + .class = &omap2430_mailbox_hwmod_class, + .mpu_irqs = omap2430_mailbox_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2430_mailbox_irqs), + .main_clk = "mailboxes_ick", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_MAILBOXES_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_MAILBOXES_SHIFT, + }, + }, + .slaves = omap2430_mailbox_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_mailbox_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), +}; + /* * 'mcspi' class * multichannel serial port interface (mcspi) / master/slave synchronous serial @@ -1537,6 +1606,9 @@ static __initdata struct omap_hwmod *omap2430_hwmods[] = { /* dma_system class*/ &omap2430_dma_system_hwmod, + /* mailbox class */ + &omap2430_mailbox_hwmod, + /* mcspi class */ &omap2430_mcspi1_hwmod, &omap2430_mcspi2_hwmod, -- cgit v1.2.3-18-g5258 From 0f9dfdd3d76d356250595cde200efe7c07dec0a1 Mon Sep 17 00:00:00 2001 From: Felipe Contreras Date: Thu, 24 Feb 2011 12:51:32 -0800 Subject: OMAP3: hwmod data: add mailbox data Mailbox hwmod data for omap3. Signed-off-by: Felipe Contreras Signed-off-by: Omar Ramirez Luna Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 71 ++++++++++++++++++++++++++++++ 1 file changed, 71 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index e9d00122856..510d5e11a4e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1858,6 +1858,74 @@ static struct omap_hwmod omap36xx_sr2_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3630ES1), }; +/* + * 'mailbox' class + * mailbox module allowing communication between the on-chip processors + * using a queued mailbox-interrupt mechanism. + */ + +static struct omap_hwmod_class_sysconfig omap3xxx_mailbox_sysc = { + .rev_offs = 0x000, + .sysc_offs = 0x010, + .syss_offs = 0x014, + .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap3xxx_mailbox_hwmod_class = { + .name = "mailbox", + .sysc = &omap3xxx_mailbox_sysc, +}; + +static struct omap_hwmod omap3xxx_mailbox_hwmod; +static struct omap_hwmod_irq_info omap3xxx_mailbox_irqs[] = { + { .irq = 26 }, +}; + +static struct omap_hwmod_addr_space omap3xxx_mailbox_addrs[] = { + { + .pa_start = 0x48094000, + .pa_end = 0x480941ff, + .flags = ADDR_TYPE_RT, + }, +}; + +/* l4_core -> mailbox */ +static struct omap_hwmod_ocp_if omap3xxx_l4_core__mailbox = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_mailbox_hwmod, + .addr = omap3xxx_mailbox_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_mailbox_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mailbox slave ports */ +static struct omap_hwmod_ocp_if *omap3xxx_mailbox_slaves[] = { + &omap3xxx_l4_core__mailbox, +}; + +static struct omap_hwmod omap3xxx_mailbox_hwmod = { + .name = "mailbox", + .class = &omap3xxx_mailbox_hwmod_class, + .mpu_irqs = omap3xxx_mailbox_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_mailbox_irqs), + .main_clk = "mailboxes_ick", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_MAILBOXES_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_MAILBOXES_SHIFT, + }, + }, + .slaves = omap3xxx_mailbox_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_mailbox_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + /* l4 core -> mcspi1 interface */ static struct omap_hwmod_addr_space omap34xx_mcspi1_addr_space[] = { { @@ -2253,6 +2321,9 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { /* dma_system class*/ &omap3xxx_dma_system_hwmod, + /* mailbox class */ + &omap3xxx_mailbox_hwmod, + /* mcspi class */ &omap34xx_mcspi1, &omap34xx_mcspi2, -- cgit v1.2.3-18-g5258 From 69dbf857c80e9697621ecb0d4323385999449663 Mon Sep 17 00:00:00 2001 From: Felipe Contreras Date: Thu, 24 Feb 2011 12:51:33 -0800 Subject: OMAP: mailbox: build device using omap_device/omap_hwmod Remove static platform_device and resource data within omap mailbox driver; use the one defined in the hwmod database along with omap_device framework for device build and registration. Add device latency functions to be used, so clock can be enabled and sysconfig is configured. Signed-off-by: Felipe Contreras Signed-off-by: Omar Ramirez Luna Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/devices.c | 98 +++++++------------------------------------ arch/arm/mach-omap2/mailbox.c | 7 ++-- 2 files changed, 19 insertions(+), 86 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 9ee876fd367..d216976988d 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -184,95 +184,29 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data } #if defined(CONFIG_OMAP_MBOX_FWK) || defined(CONFIG_OMAP_MBOX_FWK_MODULE) - -#define MBOX_REG_SIZE 0x120 - -#ifdef CONFIG_ARCH_OMAP2 -static struct resource omap2_mbox_resources[] = { - { - .start = OMAP24XX_MAILBOX_BASE, - .end = OMAP24XX_MAILBOX_BASE + MBOX_REG_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_24XX_MAIL_U0_MPU, - .flags = IORESOURCE_IRQ, - .name = "dsp", - }, - { - .start = INT_24XX_MAIL_U3_MPU, - .flags = IORESOURCE_IRQ, - .name = "iva", - }, -}; -static int omap2_mbox_resources_sz = ARRAY_SIZE(omap2_mbox_resources); -#else -#define omap2_mbox_resources NULL -#define omap2_mbox_resources_sz 0 -#endif - -#ifdef CONFIG_ARCH_OMAP3 -static struct resource omap3_mbox_resources[] = { - { - .start = OMAP34XX_MAILBOX_BASE, - .end = OMAP34XX_MAILBOX_BASE + MBOX_REG_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_24XX_MAIL_U0_MPU, - .flags = IORESOURCE_IRQ, - .name = "dsp", - }, -}; -static int omap3_mbox_resources_sz = ARRAY_SIZE(omap3_mbox_resources); -#else -#define omap3_mbox_resources NULL -#define omap3_mbox_resources_sz 0 -#endif - -#ifdef CONFIG_ARCH_OMAP4 - -#define OMAP4_MBOX_REG_SIZE 0x130 -static struct resource omap4_mbox_resources[] = { - { - .start = OMAP44XX_MAILBOX_BASE, - .end = OMAP44XX_MAILBOX_BASE + - OMAP4_MBOX_REG_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = OMAP44XX_IRQ_MAIL_U0, - .flags = IORESOURCE_IRQ, - .name = "mbox", +static struct omap_device_pm_latency mbox_latencies[] = { + [0] = { + .activate_func = omap_device_enable_hwmods, + .deactivate_func = omap_device_idle_hwmods, + .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, }, }; -static int omap4_mbox_resources_sz = ARRAY_SIZE(omap4_mbox_resources); -#else -#define omap4_mbox_resources NULL -#define omap4_mbox_resources_sz 0 -#endif - -static struct platform_device mbox_device = { - .name = "omap-mailbox", - .id = -1, -}; static inline void omap_init_mbox(void) { - if (cpu_is_omap24xx()) { - mbox_device.resource = omap2_mbox_resources; - mbox_device.num_resources = omap2_mbox_resources_sz; - } else if (cpu_is_omap34xx()) { - mbox_device.resource = omap3_mbox_resources; - mbox_device.num_resources = omap3_mbox_resources_sz; - } else if (cpu_is_omap44xx()) { - mbox_device.resource = omap4_mbox_resources; - mbox_device.num_resources = omap4_mbox_resources_sz; - } else { - pr_err("%s: platform not supported\n", __func__); + struct omap_hwmod *oh; + struct omap_device *od; + + oh = omap_hwmod_lookup("mailbox"); + if (!oh) { + pr_err("%s: unable to find hwmod\n", __func__); return; } - platform_device_register(&mbox_device); + + od = omap_device_build("omap-mailbox", -1, oh, NULL, 0, + mbox_latencies, ARRAY_SIZE(mbox_latencies), 0); + WARN(IS_ERR(od), "%s: could not build device, err %ld\n", + __func__, PTR_ERR(od)); } #else static inline void omap_init_mbox(void) { } diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index 29b9dc3917a..de352bdbcd0 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -398,14 +398,14 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev) else if (cpu_is_omap34xx()) { list = omap3_mboxes; - list[0]->irq = platform_get_irq_byname(pdev, "dsp"); + list[0]->irq = platform_get_irq(pdev, 0); } #endif #if defined(CONFIG_ARCH_OMAP2) else if (cpu_is_omap2430()) { list = omap2_mboxes; - list[0]->irq = platform_get_irq_byname(pdev, "dsp"); + list[0]->irq = platform_get_irq(pdev, 0); } else if (cpu_is_omap2420()) { list = omap2_mboxes; @@ -417,8 +417,7 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev) else if (cpu_is_omap44xx()) { list = omap4_mboxes; - list[0]->irq = list[1]->irq = - platform_get_irq_byname(pdev, "mbox"); + list[0]->irq = list[1]->irq = platform_get_irq(pdev, 0); } #endif else { -- cgit v1.2.3-18-g5258 From 82d2a5db5296834a4317e554f57b8883d7abb86d Mon Sep 17 00:00:00 2001 From: Omar Ramirez Luna Date: Thu, 24 Feb 2011 12:51:33 -0800 Subject: OMAP: mailbox: use runtime pm for clk and sysc handling Use runtime pm APIs to enable/disable mailbox clocks and to configure SYSC register. Based on the patch sent by Felipe Contreras: https://patchwork.kernel.org/patch/101662/ Signed-off-by: Omar Ramirez Luna Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/mailbox.c | 65 ++++--------------------------------------- 1 file changed, 5 insertions(+), 60 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index de352bdbcd0..9a61e1f907a 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -14,12 +14,11 @@ #include #include #include +#include #include #include #define MAILBOX_REVISION 0x000 -#define MAILBOX_SYSCONFIG 0x010 -#define MAILBOX_SYSSTATUS 0x014 #define MAILBOX_MESSAGE(m) (0x040 + 4 * (m)) #define MAILBOX_FIFOSTATUS(m) (0x080 + 4 * (m)) #define MAILBOX_MSGSTATUS(m) (0x0c0 + 4 * (m)) @@ -33,17 +32,6 @@ #define MAILBOX_IRQ_NEWMSG(m) (1 << (2 * (m))) #define MAILBOX_IRQ_NOTFULL(m) (1 << (2 * (m) + 1)) -/* SYSCONFIG: register bit definition */ -#define AUTOIDLE (1 << 0) -#define SOFTRESET (1 << 1) -#define SMARTIDLE (2 << 3) -#define OMAP4_SOFTRESET (1 << 0) -#define OMAP4_NOIDLE (1 << 2) -#define OMAP4_SMARTIDLE (2 << 2) - -/* SYSSTATUS: register bit definition */ -#define RESETDONE (1 << 0) - #define MBOX_REG_SIZE 0x120 #define OMAP4_MBOX_REG_SIZE 0x130 @@ -70,8 +58,6 @@ struct omap_mbox2_priv { unsigned long irqdisable; }; -static struct clk *mbox_ick_handle; - static void omap2_mbox_enable_irq(struct omap_mbox *mbox, omap_mbox_type_t irq); @@ -89,53 +75,13 @@ static inline void mbox_write_reg(u32 val, size_t ofs) static int omap2_mbox_startup(struct omap_mbox *mbox) { u32 l; - unsigned long timeout; - mbox_ick_handle = clk_get(NULL, "mailboxes_ick"); - if (IS_ERR(mbox_ick_handle)) { - printk(KERN_ERR "Could not get mailboxes_ick: %ld\n", - PTR_ERR(mbox_ick_handle)); - return PTR_ERR(mbox_ick_handle); - } - clk_enable(mbox_ick_handle); - - if (cpu_is_omap44xx()) { - mbox_write_reg(OMAP4_SOFTRESET, MAILBOX_SYSCONFIG); - timeout = jiffies + msecs_to_jiffies(20); - do { - l = mbox_read_reg(MAILBOX_SYSCONFIG); - if (!(l & OMAP4_SOFTRESET)) - break; - } while (!time_after(jiffies, timeout)); - - if (l & OMAP4_SOFTRESET) { - pr_err("Can't take mailbox out of reset\n"); - return -ENODEV; - } - } else { - mbox_write_reg(SOFTRESET, MAILBOX_SYSCONFIG); - timeout = jiffies + msecs_to_jiffies(20); - do { - l = mbox_read_reg(MAILBOX_SYSSTATUS); - if (l & RESETDONE) - break; - } while (!time_after(jiffies, timeout)); - - if (!(l & RESETDONE)) { - pr_err("Can't take mailbox out of reset\n"); - return -ENODEV; - } - } + pm_runtime_enable(mbox->dev->parent); + pm_runtime_get_sync(mbox->dev->parent); l = mbox_read_reg(MAILBOX_REVISION); pr_debug("omap mailbox rev %d.%d\n", (l & 0xf0) >> 4, (l & 0x0f)); - if (cpu_is_omap44xx()) - l = OMAP4_SMARTIDLE; - else - l = SMARTIDLE | AUTOIDLE; - mbox_write_reg(l, MAILBOX_SYSCONFIG); - omap2_mbox_enable_irq(mbox, IRQ_RX); return 0; @@ -143,9 +89,8 @@ static int omap2_mbox_startup(struct omap_mbox *mbox) static void omap2_mbox_shutdown(struct omap_mbox *mbox) { - clk_disable(mbox_ick_handle); - clk_put(mbox_ick_handle); - mbox_ick_handle = NULL; + pm_runtime_put_sync(mbox->dev->parent); + pm_runtime_disable(mbox->dev->parent); } /* Mailbox FIFO handle functions */ -- cgit v1.2.3-18-g5258 From cd5038024d6c92fbe4bf67af91eea5c6fb24a192 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Thu, 24 Feb 2011 12:51:45 -0800 Subject: OMAP: hwmod: allow hwmod to provide address space accessible from SDMA Adds support for resource API to get address space info other than just MPU. The drivers can now use platform_get_resource_byname() to get resource of type 'IORESOURCE_MEM' by name. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Benoit Cousson Acked-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod.c | 1 + arch/arm/plat-omap/include/plat/omap_hwmod.h | 4 +++- 2 files changed, 4 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 9e89a58711b..c7762ab0dc8 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1883,6 +1883,7 @@ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res) os = oh->slaves[i]; for (j = 0; j < os->addr_cnt; j++) { + (res + r)->name = (os->addr + j)->name; (res + r)->start = (os->addr + j)->pa_start; (res + r)->end = (os->addr + j)->pa_end; (res + r)->flags = IORESOURCE_MEM; diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index fedd82971c9..04b1ea16a67 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -178,7 +178,8 @@ struct omap_hwmod_omap2_firewall { #define ADDR_TYPE_RT (1 << 1) /** - * struct omap_hwmod_addr_space - MPU address space handled by the hwmod + * struct omap_hwmod_addr_space - address space handled by the hwmod + * @name: name of the address space * @pa_start: starting physical address * @pa_end: ending physical address * @flags: (see omap_hwmod_addr_space.flags macros above) @@ -187,6 +188,7 @@ struct omap_hwmod_omap2_firewall { * structure. GPMC is one example. */ struct omap_hwmod_addr_space { + const char *name; u32 pa_start; u32 pa_end; u8 flags; -- cgit v1.2.3-18-g5258 From 3cf32bba8ca0e0052ca41d74d455a5805b7fea85 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Thu, 24 Feb 2011 12:51:45 -0800 Subject: OMAP: McBSP: Convert McBSP to platform device model Implement McBSP as platform device and add support for registering through platform device layer using resource structures. Later in this patch series, OMAP2+ McBSP driver would be modified to use hwmod framework after populating the omap2+ hwmod database. Signed-off-by: Kishon Vijay Abraham I Acked-by: Peter Ujfalusi Acked-by: Jarkko Nikula Acked-by: Mark Brown Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/mcbsp.c | 327 +++++++++++++---- arch/arm/mach-omap2/mcbsp.c | 613 ++++++++++++++++++++++++++------ arch/arm/plat-omap/devices.c | 10 +- arch/arm/plat-omap/include/plat/mcbsp.h | 14 +- arch/arm/plat-omap/mcbsp.c | 59 ++- 5 files changed, 818 insertions(+), 205 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index 820973666f3..e68f6c012fd 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -10,6 +10,7 @@ * * Multichannel mode not supported. */ +#include #include #include #include @@ -78,100 +79,288 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = { }; #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) +struct resource omap7xx_mcbsp_res[][6] = { + { + { + .start = OMAP7XX_MCBSP1_BASE, + .end = OMAP7XX_MCBSP1_BASE + SZ_256, + .flags = IORESOURCE_MEM, + }, + { + .name = "rx", + .start = INT_7XX_McBSP1RX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "tx", + .start = INT_7XX_McBSP1TX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "rx", + .start = OMAP_DMA_MCBSP1_RX, + .flags = IORESOURCE_DMA, + }, + { + .name = "tx", + .start = OMAP_DMA_MCBSP1_TX, + .flags = IORESOURCE_DMA, + }, + }, + { + { + .start = OMAP7XX_MCBSP2_BASE, + .end = OMAP7XX_MCBSP2_BASE + SZ_256, + .flags = IORESOURCE_MEM, + }, + { + .name = "rx", + .start = INT_7XX_McBSP2RX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "tx", + .start = INT_7XX_McBSP2TX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "rx", + .start = OMAP_DMA_MCBSP3_RX, + .flags = IORESOURCE_DMA, + }, + { + .name = "tx", + .start = OMAP_DMA_MCBSP3_TX, + .flags = IORESOURCE_DMA, + }, + }, +}; + static struct omap_mcbsp_platform_data omap7xx_mcbsp_pdata[] = { { - .phys_base = OMAP7XX_MCBSP1_BASE, - .dma_rx_sync = OMAP_DMA_MCBSP1_RX, - .dma_tx_sync = OMAP_DMA_MCBSP1_TX, - .rx_irq = INT_7XX_McBSP1RX, - .tx_irq = INT_7XX_McBSP1TX, .ops = &omap1_mcbsp_ops, }, { - .phys_base = OMAP7XX_MCBSP2_BASE, - .dma_rx_sync = OMAP_DMA_MCBSP3_RX, - .dma_tx_sync = OMAP_DMA_MCBSP3_TX, - .rx_irq = INT_7XX_McBSP2RX, - .tx_irq = INT_7XX_McBSP2TX, .ops = &omap1_mcbsp_ops, }, }; -#define OMAP7XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap7xx_mcbsp_pdata) -#define OMAP7XX_MCBSP_REG_NUM (OMAP_MCBSP_REG_XCERH / sizeof(u16) + 1) +#define OMAP7XX_MCBSP_RES_SZ ARRAY_SIZE(omap7xx_mcbsp_res[1]) +#define OMAP7XX_MCBSP_COUNT ARRAY_SIZE(omap7xx_mcbsp_res) #else +#define omap7xx_mcbsp_res NULL #define omap7xx_mcbsp_pdata NULL -#define OMAP7XX_MCBSP_PDATA_SZ 0 -#define OMAP7XX_MCBSP_REG_NUM 0 +#define OMAP7XX_MCBSP_RES_SZ 0 +#define OMAP7XX_MCBSP_COUNT 0 #endif #ifdef CONFIG_ARCH_OMAP15XX +struct resource omap15xx_mcbsp_res[][6] = { + { + { + .start = OMAP1510_MCBSP1_BASE, + .end = OMAP1510_MCBSP1_BASE + SZ_256, + .flags = IORESOURCE_MEM, + }, + { + .name = "rx", + .start = INT_McBSP1RX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "tx", + .start = INT_McBSP1TX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "rx", + .start = OMAP_DMA_MCBSP1_RX, + .flags = IORESOURCE_DMA, + }, + { + .name = "tx", + .start = OMAP_DMA_MCBSP1_TX, + .flags = IORESOURCE_DMA, + }, + }, + { + { + .start = OMAP1510_MCBSP2_BASE, + .end = OMAP1510_MCBSP2_BASE + SZ_256, + .flags = IORESOURCE_MEM, + }, + { + .name = "rx", + .start = INT_1510_SPI_RX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "tx", + .start = INT_1510_SPI_TX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "rx", + .start = OMAP_DMA_MCBSP2_RX, + .flags = IORESOURCE_DMA, + }, + { + .name = "tx", + .start = OMAP_DMA_MCBSP2_TX, + .flags = IORESOURCE_DMA, + }, + }, + { + { + .start = OMAP1510_MCBSP3_BASE, + .end = OMAP1510_MCBSP3_BASE + SZ_256, + .flags = IORESOURCE_MEM, + }, + { + .name = "rx", + .start = INT_McBSP3RX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "tx", + .start = INT_McBSP3TX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "rx", + .start = OMAP_DMA_MCBSP3_RX, + .flags = IORESOURCE_DMA, + }, + { + .name = "tx", + .start = OMAP_DMA_MCBSP3_TX, + .flags = IORESOURCE_DMA, + }, + }, +}; + static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = { { - .phys_base = OMAP1510_MCBSP1_BASE, - .dma_rx_sync = OMAP_DMA_MCBSP1_RX, - .dma_tx_sync = OMAP_DMA_MCBSP1_TX, - .rx_irq = INT_McBSP1RX, - .tx_irq = INT_McBSP1TX, .ops = &omap1_mcbsp_ops, }, { - .phys_base = OMAP1510_MCBSP2_BASE, - .dma_rx_sync = OMAP_DMA_MCBSP2_RX, - .dma_tx_sync = OMAP_DMA_MCBSP2_TX, - .rx_irq = INT_1510_SPI_RX, - .tx_irq = INT_1510_SPI_TX, .ops = &omap1_mcbsp_ops, }, { - .phys_base = OMAP1510_MCBSP3_BASE, - .dma_rx_sync = OMAP_DMA_MCBSP3_RX, - .dma_tx_sync = OMAP_DMA_MCBSP3_TX, - .rx_irq = INT_McBSP3RX, - .tx_irq = INT_McBSP3TX, .ops = &omap1_mcbsp_ops, }, }; -#define OMAP15XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap15xx_mcbsp_pdata) -#define OMAP15XX_MCBSP_REG_NUM (OMAP_MCBSP_REG_XCERH / sizeof(u16) + 1) +#define OMAP15XX_MCBSP_RES_SZ ARRAY_SIZE(omap15xx_mcbsp_res[1]) +#define OMAP15XX_MCBSP_COUNT ARRAY_SIZE(omap15xx_mcbsp_res) #else +#define omap15xx_mcbsp_res NULL #define omap15xx_mcbsp_pdata NULL -#define OMAP15XX_MCBSP_PDATA_SZ 0 -#define OMAP15XX_MCBSP_REG_NUM 0 +#define OMAP15XX_MCBSP_RES_SZ 0 +#define OMAP15XX_MCBSP_COUNT 0 #endif #ifdef CONFIG_ARCH_OMAP16XX +struct resource omap16xx_mcbsp_res[][6] = { + { + { + .start = OMAP1610_MCBSP1_BASE, + .end = OMAP1610_MCBSP1_BASE + SZ_256, + .flags = IORESOURCE_MEM, + }, + { + .name = "rx", + .start = INT_McBSP1RX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "tx", + .start = INT_McBSP1TX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "rx", + .start = OMAP_DMA_MCBSP1_RX, + .flags = IORESOURCE_DMA, + }, + { + .name = "tx", + .start = OMAP_DMA_MCBSP1_TX, + .flags = IORESOURCE_DMA, + }, + }, + { + { + .start = OMAP1610_MCBSP2_BASE, + .end = OMAP1610_MCBSP2_BASE + SZ_256, + .flags = IORESOURCE_MEM, + }, + { + .name = "rx", + .start = INT_1610_McBSP2_RX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "tx", + .start = INT_1610_McBSP2_TX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "rx", + .start = OMAP_DMA_MCBSP2_RX, + .flags = IORESOURCE_DMA, + }, + { + .name = "tx", + .start = OMAP_DMA_MCBSP2_TX, + .flags = IORESOURCE_DMA, + }, + }, + { + { + .start = OMAP1610_MCBSP3_BASE, + .end = OMAP1610_MCBSP3_BASE + SZ_256, + .flags = IORESOURCE_MEM, + }, + { + .name = "rx", + .start = INT_McBSP3RX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "tx", + .start = INT_McBSP3TX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "rx", + .start = OMAP_DMA_MCBSP3_RX, + .flags = IORESOURCE_DMA, + }, + { + .name = "tx", + .start = OMAP_DMA_MCBSP3_TX, + .flags = IORESOURCE_DMA, + }, + }, +}; + static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { { - .phys_base = OMAP1610_MCBSP1_BASE, - .dma_rx_sync = OMAP_DMA_MCBSP1_RX, - .dma_tx_sync = OMAP_DMA_MCBSP1_TX, - .rx_irq = INT_McBSP1RX, - .tx_irq = INT_McBSP1TX, .ops = &omap1_mcbsp_ops, }, { - .phys_base = OMAP1610_MCBSP2_BASE, - .dma_rx_sync = OMAP_DMA_MCBSP2_RX, - .dma_tx_sync = OMAP_DMA_MCBSP2_TX, - .rx_irq = INT_1610_McBSP2_RX, - .tx_irq = INT_1610_McBSP2_TX, .ops = &omap1_mcbsp_ops, }, { - .phys_base = OMAP1610_MCBSP3_BASE, - .dma_rx_sync = OMAP_DMA_MCBSP3_RX, - .dma_tx_sync = OMAP_DMA_MCBSP3_TX, - .rx_irq = INT_McBSP3RX, - .tx_irq = INT_McBSP3TX, .ops = &omap1_mcbsp_ops, }, }; -#define OMAP16XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap16xx_mcbsp_pdata) -#define OMAP16XX_MCBSP_REG_NUM (OMAP_MCBSP_REG_XCERH / sizeof(u16) + 1) +#define OMAP16XX_MCBSP_RES_SZ ARRAY_SIZE(omap16xx_mcbsp_res[1]) +#define OMAP16XX_MCBSP_COUNT ARRAY_SIZE(omap16xx_mcbsp_res) #else +#define omap16xx_mcbsp_res NULL #define omap16xx_mcbsp_pdata NULL -#define OMAP16XX_MCBSP_PDATA_SZ 0 -#define OMAP16XX_MCBSP_REG_NUM 0 +#define OMAP16XX_MCBSP_RES_SZ 0 +#define OMAP16XX_MCBSP_COUNT 0 #endif static int __init omap1_mcbsp_init(void) @@ -179,16 +368,12 @@ static int __init omap1_mcbsp_init(void) if (!cpu_class_is_omap1()) return -ENODEV; - if (cpu_is_omap7xx()) { - omap_mcbsp_count = OMAP7XX_MCBSP_PDATA_SZ; - omap_mcbsp_cache_size = OMAP7XX_MCBSP_REG_NUM * sizeof(u16); - } else if (cpu_is_omap15xx()) { - omap_mcbsp_count = OMAP15XX_MCBSP_PDATA_SZ; - omap_mcbsp_cache_size = OMAP15XX_MCBSP_REG_NUM * sizeof(u16); - } else if (cpu_is_omap16xx()) { - omap_mcbsp_count = OMAP16XX_MCBSP_PDATA_SZ; - omap_mcbsp_cache_size = OMAP16XX_MCBSP_REG_NUM * sizeof(u16); - } + if (cpu_is_omap7xx()) + omap_mcbsp_count = OMAP7XX_MCBSP_COUNT; + else if (cpu_is_omap15xx()) + omap_mcbsp_count = OMAP15XX_MCBSP_COUNT; + else if (cpu_is_omap16xx()) + omap_mcbsp_count = OMAP16XX_MCBSP_COUNT; mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *), GFP_KERNEL); @@ -196,16 +381,22 @@ static int __init omap1_mcbsp_init(void) return -ENOMEM; if (cpu_is_omap7xx()) - omap_mcbsp_register_board_cfg(omap7xx_mcbsp_pdata, - OMAP7XX_MCBSP_PDATA_SZ); + omap_mcbsp_register_board_cfg(omap7xx_mcbsp_res[0], + OMAP7XX_MCBSP_RES_SZ, + omap7xx_mcbsp_pdata, + OMAP7XX_MCBSP_COUNT); if (cpu_is_omap15xx()) - omap_mcbsp_register_board_cfg(omap15xx_mcbsp_pdata, - OMAP15XX_MCBSP_PDATA_SZ); + omap_mcbsp_register_board_cfg(omap15xx_mcbsp_res[0], + OMAP15XX_MCBSP_RES_SZ, + omap15xx_mcbsp_pdata, + OMAP15XX_MCBSP_COUNT); if (cpu_is_omap16xx()) - omap_mcbsp_register_board_cfg(omap16xx_mcbsp_pdata, - OMAP16XX_MCBSP_PDATA_SZ); + omap_mcbsp_register_board_cfg(omap16xx_mcbsp_res[0], + OMAP16XX_MCBSP_RES_SZ, + omap16xx_mcbsp_pdata, + OMAP16XX_MCBSP_COUNT); return omap_mcbsp_init(); } diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index 0526b758bdc..765ebe7da72 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -105,173 +105,542 @@ EXPORT_SYMBOL(omap2_mcbsp_set_clks_src); /* Platform data */ #ifdef CONFIG_SOC_OMAP2420 -static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = { +struct resource omap2420_mcbsp_res[][6] = { { - .phys_base = OMAP24XX_MCBSP1_BASE, - .dma_rx_sync = OMAP24XX_DMA_MCBSP1_RX, - .dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX, - .rx_irq = INT_24XX_MCBSP1_IRQ_RX, - .tx_irq = INT_24XX_MCBSP1_IRQ_TX, + { + .start = OMAP24XX_MCBSP1_BASE, + .end = OMAP24XX_MCBSP1_BASE + SZ_256, + .flags = IORESOURCE_MEM, + }, + { + .name = "rx", + .start = INT_24XX_MCBSP1_IRQ_RX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "tx", + .start = INT_24XX_MCBSP1_IRQ_TX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "rx", + .start = OMAP24XX_DMA_MCBSP1_RX, + .flags = IORESOURCE_DMA, + }, + { + .name = "tx", + .start = OMAP24XX_DMA_MCBSP1_TX, + .flags = IORESOURCE_DMA, + }, }, { - .phys_base = OMAP24XX_MCBSP2_BASE, - .dma_rx_sync = OMAP24XX_DMA_MCBSP2_RX, - .dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX, - .rx_irq = INT_24XX_MCBSP2_IRQ_RX, - .tx_irq = INT_24XX_MCBSP2_IRQ_TX, + { + .start = OMAP24XX_MCBSP2_BASE, + .end = OMAP24XX_MCBSP2_BASE + SZ_256, + .flags = IORESOURCE_MEM, + }, + { + .name = "rx", + .start = INT_24XX_MCBSP2_IRQ_RX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "tx", + .start = INT_24XX_MCBSP2_IRQ_TX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "rx", + .start = OMAP24XX_DMA_MCBSP2_RX, + .flags = IORESOURCE_DMA, + }, + { + .name = "tx", + .start = OMAP24XX_DMA_MCBSP2_TX, + .flags = IORESOURCE_DMA, + }, }, }; -#define OMAP2420_MCBSP_PDATA_SZ ARRAY_SIZE(omap2420_mcbsp_pdata) -#define OMAP2420_MCBSP_REG_NUM (OMAP_MCBSP_REG_RCCR / sizeof(u32) + 1) +#define OMAP2420_MCBSP_RES_SZ ARRAY_SIZE(omap2420_mcbsp_res[1]) +#define OMAP2420_MCBSP_COUNT ARRAY_SIZE(omap2420_mcbsp_res) #else -#define omap2420_mcbsp_pdata NULL -#define OMAP2420_MCBSP_PDATA_SZ 0 -#define OMAP2420_MCBSP_REG_NUM 0 +#define omap2420_mcbsp_res NULL +#define OMAP2420_MCBSP_RES_SZ 0 +#define OMAP2420_MCBSP_COUNT 0 #endif +#define omap2420_mcbsp_pdata NULL + #ifdef CONFIG_SOC_OMAP2430 -static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = { +struct resource omap2430_mcbsp_res[][6] = { { - .phys_base = OMAP24XX_MCBSP1_BASE, - .dma_rx_sync = OMAP24XX_DMA_MCBSP1_RX, - .dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX, - .rx_irq = INT_24XX_MCBSP1_IRQ_RX, - .tx_irq = INT_24XX_MCBSP1_IRQ_TX, + { + .start = OMAP24XX_MCBSP1_BASE, + .end = OMAP24XX_MCBSP1_BASE + SZ_256, + .flags = IORESOURCE_MEM, + }, + { + .name = "rx", + .start = INT_24XX_MCBSP1_IRQ_RX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "tx", + .start = INT_24XX_MCBSP1_IRQ_TX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "rx", + .start = OMAP24XX_DMA_MCBSP1_RX, + .flags = IORESOURCE_DMA, + }, + { + .name = "tx", + .start = OMAP24XX_DMA_MCBSP1_TX, + .flags = IORESOURCE_DMA, + }, }, { - .phys_base = OMAP24XX_MCBSP2_BASE, - .dma_rx_sync = OMAP24XX_DMA_MCBSP2_RX, - .dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX, - .rx_irq = INT_24XX_MCBSP2_IRQ_RX, - .tx_irq = INT_24XX_MCBSP2_IRQ_TX, + { + .start = OMAP24XX_MCBSP2_BASE, + .end = OMAP24XX_MCBSP2_BASE + SZ_256, + .flags = IORESOURCE_MEM, + }, + { + .name = "rx", + .start = INT_24XX_MCBSP2_IRQ_RX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "tx", + .start = INT_24XX_MCBSP2_IRQ_TX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "rx", + .start = OMAP24XX_DMA_MCBSP2_RX, + .flags = IORESOURCE_DMA, + }, + { + .name = "tx", + .start = OMAP24XX_DMA_MCBSP2_TX, + .flags = IORESOURCE_DMA, + }, }, { - .phys_base = OMAP2430_MCBSP3_BASE, - .dma_rx_sync = OMAP24XX_DMA_MCBSP3_RX, - .dma_tx_sync = OMAP24XX_DMA_MCBSP3_TX, - .rx_irq = INT_24XX_MCBSP3_IRQ_RX, - .tx_irq = INT_24XX_MCBSP3_IRQ_TX, + { + .start = OMAP2430_MCBSP3_BASE, + .end = OMAP2430_MCBSP3_BASE + SZ_256, + .flags = IORESOURCE_MEM, + }, + { + .name = "rx", + .start = INT_24XX_MCBSP3_IRQ_RX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "tx", + .start = INT_24XX_MCBSP3_IRQ_TX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "rx", + .start = OMAP24XX_DMA_MCBSP3_RX, + .flags = IORESOURCE_DMA, + }, + { + .name = "tx", + .start = OMAP24XX_DMA_MCBSP3_TX, + .flags = IORESOURCE_DMA, + }, }, { - .phys_base = OMAP2430_MCBSP4_BASE, - .dma_rx_sync = OMAP24XX_DMA_MCBSP4_RX, - .dma_tx_sync = OMAP24XX_DMA_MCBSP4_TX, - .rx_irq = INT_24XX_MCBSP4_IRQ_RX, - .tx_irq = INT_24XX_MCBSP4_IRQ_TX, + { + .start = OMAP2430_MCBSP4_BASE, + .end = OMAP2430_MCBSP4_BASE + SZ_256, + .flags = IORESOURCE_MEM, + }, + { + .name = "rx", + .start = INT_24XX_MCBSP4_IRQ_RX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "tx", + .start = INT_24XX_MCBSP4_IRQ_TX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "rx", + .start = OMAP24XX_DMA_MCBSP4_RX, + .flags = IORESOURCE_DMA, + }, + { + .name = "tx", + .start = OMAP24XX_DMA_MCBSP4_TX, + .flags = IORESOURCE_DMA, + }, }, { - .phys_base = OMAP2430_MCBSP5_BASE, - .dma_rx_sync = OMAP24XX_DMA_MCBSP5_RX, - .dma_tx_sync = OMAP24XX_DMA_MCBSP5_TX, - .rx_irq = INT_24XX_MCBSP5_IRQ_RX, - .tx_irq = INT_24XX_MCBSP5_IRQ_TX, + { + .start = OMAP2430_MCBSP5_BASE, + .end = OMAP2430_MCBSP5_BASE + SZ_256, + .flags = IORESOURCE_MEM, + }, + { + .name = "rx", + .start = INT_24XX_MCBSP5_IRQ_RX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "tx", + .start = INT_24XX_MCBSP5_IRQ_TX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "rx", + .start = OMAP24XX_DMA_MCBSP5_RX, + .flags = IORESOURCE_DMA, + }, + { + .name = "tx", + .start = OMAP24XX_DMA_MCBSP5_TX, + .flags = IORESOURCE_DMA, + }, }, }; -#define OMAP2430_MCBSP_PDATA_SZ ARRAY_SIZE(omap2430_mcbsp_pdata) -#define OMAP2430_MCBSP_REG_NUM (OMAP_MCBSP_REG_RCCR / sizeof(u32) + 1) +#define OMAP2430_MCBSP_RES_SZ ARRAY_SIZE(omap2430_mcbsp_res[1]) +#define OMAP2430_MCBSP_COUNT ARRAY_SIZE(omap2430_mcbsp_res) #else -#define omap2430_mcbsp_pdata NULL -#define OMAP2430_MCBSP_PDATA_SZ 0 -#define OMAP2430_MCBSP_REG_NUM 0 +#define omap2430_mcbsp_res NULL +#define OMAP2430_MCBSP_RES_SZ 0 +#define OMAP2430_MCBSP_COUNT 0 #endif +#define omap2430_mcbsp_pdata NULL + #ifdef CONFIG_ARCH_OMAP3 +struct resource omap34xx_mcbsp_res[][7] = { + { + { + .start = OMAP34XX_MCBSP1_BASE, + .end = OMAP34XX_MCBSP1_BASE + SZ_256, + .flags = IORESOURCE_MEM, + }, + { + .name = "rx", + .start = INT_24XX_MCBSP1_IRQ_RX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "tx", + .start = INT_24XX_MCBSP1_IRQ_TX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "rx", + .start = OMAP24XX_DMA_MCBSP1_RX, + .flags = IORESOURCE_DMA, + }, + { + .name = "tx", + .start = OMAP24XX_DMA_MCBSP1_TX, + .flags = IORESOURCE_DMA, + }, + }, + { + { + .start = OMAP34XX_MCBSP2_BASE, + .end = OMAP34XX_MCBSP2_BASE + SZ_256, + .flags = IORESOURCE_MEM, + }, + { + .name = "sidetone", + .start = OMAP34XX_MCBSP2_ST_BASE, + .end = OMAP34XX_MCBSP2_ST_BASE + SZ_256, + .flags = IORESOURCE_MEM, + }, + { + .name = "rx", + .start = INT_24XX_MCBSP2_IRQ_RX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "tx", + .start = INT_24XX_MCBSP2_IRQ_TX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "rx", + .start = OMAP24XX_DMA_MCBSP2_RX, + .flags = IORESOURCE_DMA, + }, + { + .name = "tx", + .start = OMAP24XX_DMA_MCBSP2_TX, + .flags = IORESOURCE_DMA, + }, + }, + { + { + .start = OMAP34XX_MCBSP3_BASE, + .end = OMAP34XX_MCBSP3_BASE + SZ_256, + .flags = IORESOURCE_MEM, + }, + { + .name = "sidetone", + .start = OMAP34XX_MCBSP3_ST_BASE, + .end = OMAP34XX_MCBSP3_ST_BASE + SZ_256, + .flags = IORESOURCE_MEM, + }, + { + .name = "rx", + .start = INT_24XX_MCBSP3_IRQ_RX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "tx", + .start = INT_24XX_MCBSP3_IRQ_TX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "rx", + .start = OMAP24XX_DMA_MCBSP3_RX, + .flags = IORESOURCE_DMA, + }, + { + .name = "tx", + .start = OMAP24XX_DMA_MCBSP3_TX, + .flags = IORESOURCE_DMA, + }, + }, + { + { + .start = OMAP34XX_MCBSP4_BASE, + .end = OMAP34XX_MCBSP4_BASE + SZ_256, + .flags = IORESOURCE_MEM, + }, + { + .name = "rx", + .start = INT_24XX_MCBSP4_IRQ_RX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "tx", + .start = INT_24XX_MCBSP4_IRQ_TX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "rx", + .start = OMAP24XX_DMA_MCBSP4_RX, + .flags = IORESOURCE_DMA, + }, + { + .name = "tx", + .start = OMAP24XX_DMA_MCBSP4_TX, + .flags = IORESOURCE_DMA, + }, + }, + { + { + .start = OMAP34XX_MCBSP5_BASE, + .end = OMAP34XX_MCBSP5_BASE + SZ_256, + .flags = IORESOURCE_MEM, + }, + { + .name = "rx", + .start = INT_24XX_MCBSP5_IRQ_RX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "tx", + .start = INT_24XX_MCBSP5_IRQ_TX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "rx", + .start = OMAP24XX_DMA_MCBSP5_RX, + .flags = IORESOURCE_DMA, + }, + { + .name = "tx", + .start = OMAP24XX_DMA_MCBSP5_TX, + .flags = IORESOURCE_DMA, + }, + }, +}; + static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { { - .phys_base = OMAP34XX_MCBSP1_BASE, - .dma_rx_sync = OMAP24XX_DMA_MCBSP1_RX, - .dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX, - .rx_irq = INT_24XX_MCBSP1_IRQ_RX, - .tx_irq = INT_24XX_MCBSP1_IRQ_TX, .buffer_size = 0x80, /* The FIFO has 128 locations */ }, { - .phys_base = OMAP34XX_MCBSP2_BASE, - .phys_base_st = OMAP34XX_MCBSP2_ST_BASE, - .dma_rx_sync = OMAP24XX_DMA_MCBSP2_RX, - .dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX, - .rx_irq = INT_24XX_MCBSP2_IRQ_RX, - .tx_irq = INT_24XX_MCBSP2_IRQ_TX, .buffer_size = 0x500, /* The FIFO has 1024 + 256 locations */ }, { - .phys_base = OMAP34XX_MCBSP3_BASE, - .phys_base_st = OMAP34XX_MCBSP3_ST_BASE, - .dma_rx_sync = OMAP24XX_DMA_MCBSP3_RX, - .dma_tx_sync = OMAP24XX_DMA_MCBSP3_TX, - .rx_irq = INT_24XX_MCBSP3_IRQ_RX, - .tx_irq = INT_24XX_MCBSP3_IRQ_TX, .buffer_size = 0x80, /* The FIFO has 128 locations */ }, { - .phys_base = OMAP34XX_MCBSP4_BASE, - .dma_rx_sync = OMAP24XX_DMA_MCBSP4_RX, - .dma_tx_sync = OMAP24XX_DMA_MCBSP4_TX, - .rx_irq = INT_24XX_MCBSP4_IRQ_RX, - .tx_irq = INT_24XX_MCBSP4_IRQ_TX, .buffer_size = 0x80, /* The FIFO has 128 locations */ }, { - .phys_base = OMAP34XX_MCBSP5_BASE, - .dma_rx_sync = OMAP24XX_DMA_MCBSP5_RX, - .dma_tx_sync = OMAP24XX_DMA_MCBSP5_TX, - .rx_irq = INT_24XX_MCBSP5_IRQ_RX, - .tx_irq = INT_24XX_MCBSP5_IRQ_TX, .buffer_size = 0x80, /* The FIFO has 128 locations */ }, }; -#define OMAP34XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap34xx_mcbsp_pdata) -#define OMAP34XX_MCBSP_REG_NUM (OMAP_MCBSP_REG_RCCR / sizeof(u32) + 1) +#define OMAP34XX_MCBSP_RES_SZ ARRAY_SIZE(omap34xx_mcbsp_res[1]) +#define OMAP34XX_MCBSP_COUNT ARRAY_SIZE(omap34xx_mcbsp_res) #else #define omap34xx_mcbsp_pdata NULL -#define OMAP34XX_MCBSP_PDATA_SZ 0 -#define OMAP34XX_MCBSP_REG_NUM 0 +#define omap34XX_mcbsp_res NULL +#define OMAP34XX_MCBSP_RES_SZ 0 +#define OMAP34XX_MCBSP_COUNT 0 #endif -static struct omap_mcbsp_platform_data omap44xx_mcbsp_pdata[] = { +struct resource omap44xx_mcbsp_res[][6] = { { - .phys_base = OMAP44XX_MCBSP1_BASE, - .dma_rx_sync = OMAP44XX_DMA_MCBSP1_RX, - .dma_tx_sync = OMAP44XX_DMA_MCBSP1_TX, - .tx_irq = OMAP44XX_IRQ_MCBSP1, + { + .name = "mpu", + .start = OMAP44XX_MCBSP1_BASE, + .end = OMAP44XX_MCBSP1_BASE + SZ_256, + .flags = IORESOURCE_MEM, + }, + { + .name = "dma", + .start = OMAP44XX_MCBSP1_DMA_BASE, + .end = OMAP44XX_MCBSP1_DMA_BASE + SZ_256, + .flags = IORESOURCE_MEM, + }, + { + .name = "rx", + .start = 0, + .flags = IORESOURCE_IRQ, + }, + { + .name = "tx", + .start = OMAP44XX_IRQ_MCBSP1, + .flags = IORESOURCE_IRQ, + }, + { + .name = "rx", + .start = OMAP44XX_DMA_MCBSP1_RX, + .flags = IORESOURCE_DMA, + }, + { + .name = "tx", + .start = OMAP44XX_DMA_MCBSP1_TX, + .flags = IORESOURCE_DMA, + }, }, { - .phys_base = OMAP44XX_MCBSP2_BASE, - .dma_rx_sync = OMAP44XX_DMA_MCBSP2_RX, - .dma_tx_sync = OMAP44XX_DMA_MCBSP2_TX, - .tx_irq = OMAP44XX_IRQ_MCBSP2, + { + .name = "mpu", + .start = OMAP44XX_MCBSP2_BASE, + .end = OMAP44XX_MCBSP2_BASE + SZ_256, + .flags = IORESOURCE_MEM, + }, + { + .name = "dma", + .start = OMAP44XX_MCBSP2_DMA_BASE, + .end = OMAP44XX_MCBSP2_DMA_BASE + SZ_256, + .flags = IORESOURCE_MEM, + }, + { + .name = "rx", + .start = 0, + .flags = IORESOURCE_IRQ, + }, + { + .name = "tx", + .start = OMAP44XX_IRQ_MCBSP2, + .flags = IORESOURCE_IRQ, + }, + { + .name = "rx", + .start = OMAP44XX_DMA_MCBSP2_RX, + .flags = IORESOURCE_DMA, + }, + { + .name = "tx", + .start = OMAP44XX_DMA_MCBSP2_TX, + .flags = IORESOURCE_DMA, + }, }, { - .phys_base = OMAP44XX_MCBSP3_BASE, - .dma_rx_sync = OMAP44XX_DMA_MCBSP3_RX, - .dma_tx_sync = OMAP44XX_DMA_MCBSP3_TX, - .tx_irq = OMAP44XX_IRQ_MCBSP3, + { + .name = "mpu", + .start = OMAP44XX_MCBSP3_BASE, + .end = OMAP44XX_MCBSP3_BASE + SZ_256, + .flags = IORESOURCE_MEM, + }, + { + .name = "dma", + .start = OMAP44XX_MCBSP3_DMA_BASE, + .end = OMAP44XX_MCBSP3_DMA_BASE + SZ_256, + .flags = IORESOURCE_MEM, + }, + { + .name = "rx", + .start = 0, + .flags = IORESOURCE_IRQ, + }, + { + .name = "tx", + .start = OMAP44XX_IRQ_MCBSP3, + .flags = IORESOURCE_IRQ, + }, + { + .name = "rx", + .start = OMAP44XX_DMA_MCBSP3_RX, + .flags = IORESOURCE_DMA, + }, + { + .name = "tx", + .start = OMAP44XX_DMA_MCBSP3_TX, + .flags = IORESOURCE_DMA, + }, }, { - .phys_base = OMAP44XX_MCBSP4_BASE, - .dma_rx_sync = OMAP44XX_DMA_MCBSP4_RX, - .dma_tx_sync = OMAP44XX_DMA_MCBSP4_TX, - .tx_irq = OMAP44XX_IRQ_MCBSP4, + { + .start = OMAP44XX_MCBSP4_BASE, + .end = OMAP44XX_MCBSP4_BASE + SZ_256, + .flags = IORESOURCE_MEM, + }, + { + .name = "rx", + .start = 0, + .flags = IORESOURCE_IRQ, + }, + { + .name = "tx", + .start = OMAP44XX_IRQ_MCBSP4, + .flags = IORESOURCE_IRQ, + }, + { + .name = "rx", + .start = OMAP44XX_DMA_MCBSP4_RX, + .flags = IORESOURCE_DMA, + }, + { + .name = "tx", + .start = OMAP44XX_DMA_MCBSP4_TX, + .flags = IORESOURCE_DMA, + }, }, }; -#define OMAP44XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap44xx_mcbsp_pdata) -#define OMAP44XX_MCBSP_REG_NUM (OMAP_MCBSP_REG_RCCR / sizeof(u32) + 1) +#define omap44xx_mcbsp_pdata NULL +#define OMAP44XX_MCBSP_RES_SZ ARRAY_SIZE(omap44xx_mcbsp_res[1]) +#define OMAP44XX_MCBSP_COUNT ARRAY_SIZE(omap44xx_mcbsp_res) static int __init omap2_mcbsp_init(void) { - if (cpu_is_omap2420()) { - omap_mcbsp_count = OMAP2420_MCBSP_PDATA_SZ; - omap_mcbsp_cache_size = OMAP2420_MCBSP_REG_NUM * sizeof(u16); - } else if (cpu_is_omap2430()) { - omap_mcbsp_count = OMAP2430_MCBSP_PDATA_SZ; - omap_mcbsp_cache_size = OMAP2430_MCBSP_REG_NUM * sizeof(u32); - } else if (cpu_is_omap34xx()) { - omap_mcbsp_count = OMAP34XX_MCBSP_PDATA_SZ; - omap_mcbsp_cache_size = OMAP34XX_MCBSP_REG_NUM * sizeof(u32); - } else if (cpu_is_omap44xx()) { - omap_mcbsp_count = OMAP44XX_MCBSP_PDATA_SZ; - omap_mcbsp_cache_size = OMAP44XX_MCBSP_REG_NUM * sizeof(u32); - } + if (cpu_is_omap2420()) + omap_mcbsp_count = OMAP2420_MCBSP_COUNT; + else if (cpu_is_omap2430()) + omap_mcbsp_count = OMAP2430_MCBSP_COUNT; + else if (cpu_is_omap34xx()) + omap_mcbsp_count = OMAP34XX_MCBSP_COUNT; + else if (cpu_is_omap44xx()) + omap_mcbsp_count = OMAP44XX_MCBSP_COUNT; mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *), GFP_KERNEL); @@ -279,17 +648,25 @@ static int __init omap2_mcbsp_init(void) return -ENOMEM; if (cpu_is_omap2420()) - omap_mcbsp_register_board_cfg(omap2420_mcbsp_pdata, - OMAP2420_MCBSP_PDATA_SZ); + omap_mcbsp_register_board_cfg(omap2420_mcbsp_res[0], + OMAP2420_MCBSP_RES_SZ, + omap2420_mcbsp_pdata, + OMAP2420_MCBSP_COUNT); if (cpu_is_omap2430()) - omap_mcbsp_register_board_cfg(omap2430_mcbsp_pdata, - OMAP2430_MCBSP_PDATA_SZ); + omap_mcbsp_register_board_cfg(omap2430_mcbsp_res[0], + OMAP2420_MCBSP_RES_SZ, + omap2430_mcbsp_pdata, + OMAP2430_MCBSP_COUNT); if (cpu_is_omap34xx()) - omap_mcbsp_register_board_cfg(omap34xx_mcbsp_pdata, - OMAP34XX_MCBSP_PDATA_SZ); + omap_mcbsp_register_board_cfg(omap34xx_mcbsp_res[0], + OMAP34XX_MCBSP_RES_SZ, + omap34xx_mcbsp_pdata, + OMAP34XX_MCBSP_COUNT); if (cpu_is_omap44xx()) - omap_mcbsp_register_board_cfg(omap44xx_mcbsp_pdata, - OMAP44XX_MCBSP_PDATA_SZ); + omap_mcbsp_register_board_cfg(omap44xx_mcbsp_res[0], + OMAP44XX_MCBSP_RES_SZ, + omap44xx_mcbsp_pdata, + OMAP44XX_MCBSP_COUNT); return omap_mcbsp_init(); } diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index 10245b837c1..7d9f815cede 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -35,8 +35,8 @@ static struct platform_device **omap_mcbsp_devices; -void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config, - int size) +void omap_mcbsp_register_board_cfg(struct resource *res, int res_count, + struct omap_mcbsp_platform_data *config, int size) { int i; @@ -54,6 +54,8 @@ void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config, new_mcbsp = platform_device_alloc("omap-mcbsp", i + 1); if (!new_mcbsp) continue; + platform_device_add_resources(new_mcbsp, &res[i * res_count], + res_count); new_mcbsp->dev.platform_data = &config[i]; ret = platform_device_add(new_mcbsp); if (ret) { @@ -65,8 +67,8 @@ void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config, } #else -void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config, - int size) +void omap_mcbsp_register_board_cfg(struct resource *res, int res_count, + struct omap_mcbsp_platform_data *config, int size) { } #endif diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h index 6ecf1051e5f..dc1a28299ae 100644 --- a/arch/arm/plat-omap/include/plat/mcbsp.h +++ b/arch/arm/plat-omap/include/plat/mcbsp.h @@ -63,9 +63,12 @@ static struct platform_device omap_mcbsp##port_nr = { \ #define OMAP34XX_MCBSP4_BASE 0x49026000 #define OMAP34XX_MCBSP5_BASE 0x48096000 -#define OMAP44XX_MCBSP1_BASE 0x49022000 -#define OMAP44XX_MCBSP2_BASE 0x49024000 -#define OMAP44XX_MCBSP3_BASE 0x49026000 +#define OMAP44XX_MCBSP1_BASE 0x40122000 +#define OMAP44XX_MCBSP1_DMA_BASE 0x49022000 +#define OMAP44XX_MCBSP2_BASE 0x40124000 +#define OMAP44XX_MCBSP2_DMA_BASE 0x49024000 +#define OMAP44XX_MCBSP3_BASE 0x40126000 +#define OMAP44XX_MCBSP3_DMA_BASE 0x49026000 #define OMAP44XX_MCBSP4_BASE 0x48096000 #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) @@ -431,6 +434,7 @@ struct omap_mcbsp_st_data { struct omap_mcbsp { struct device *dev; unsigned long phys_base; + unsigned long phys_dma_base; void __iomem *io_base; u8 id; u8 free; @@ -474,8 +478,8 @@ extern int omap_mcbsp_count, omap_mcbsp_cache_size; #define id_to_mcbsp_ptr(id) mcbsp_ptr[id]; int omap_mcbsp_init(void); -void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config, - int size); +void omap_mcbsp_register_board_cfg(struct resource *res, int res_count, + struct omap_mcbsp_platform_data *config, int size); void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config); #ifdef CONFIG_ARCH_OMAP3 void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold); diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index b5a6e178a7f..5f25ae5f9c1 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -1649,7 +1649,8 @@ static const struct attribute_group sidetone_attr_group = { static int __devinit omap_st_add(struct omap_mcbsp *mcbsp) { - struct omap_mcbsp_platform_data *pdata = mcbsp->pdata; + struct platform_device *pdev; + struct resource *res; struct omap_mcbsp_st_data *st_data; int err; @@ -1659,7 +1660,10 @@ static int __devinit omap_st_add(struct omap_mcbsp *mcbsp) goto err1; } - st_data->io_base_st = ioremap(pdata->phys_base_st, SZ_4K); + pdev = container_of(mcbsp->dev, struct platform_device, dev); + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sidetone"); + st_data->io_base_st = ioremap(res->start, resource_size(res)); if (!st_data->io_base_st) { err = -ENOMEM; goto err2; @@ -1748,6 +1752,7 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev) struct omap_mcbsp_platform_data *pdata = pdev->dev.platform_data; struct omap_mcbsp *mcbsp; int id = pdev->id - 1; + struct resource *res; int ret = 0; if (!pdata) { @@ -1777,25 +1782,59 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev) mcbsp->dma_tx_lch = -1; mcbsp->dma_rx_lch = -1; - mcbsp->phys_base = pdata->phys_base; - mcbsp->io_base = ioremap(pdata->phys_base, SZ_4K); + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mpu"); + if (!res) { + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "%s:mcbsp%d has invalid memory" + "resource\n", __func__, pdev->id); + ret = -ENOMEM; + goto exit; + } + } + mcbsp->phys_base = res->start; + omap_mcbsp_cache_size = resource_size(res); + mcbsp->io_base = ioremap(res->start, resource_size(res)); if (!mcbsp->io_base) { ret = -ENOMEM; goto err_ioremap; } + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dma"); + if (!res) + mcbsp->phys_dma_base = mcbsp->phys_base; + else + mcbsp->phys_dma_base = res->start; + /* Default I/O is IRQ based */ mcbsp->io_type = OMAP_MCBSP_IRQ_IO; - mcbsp->tx_irq = pdata->tx_irq; - mcbsp->rx_irq = pdata->rx_irq; - mcbsp->dma_rx_sync = pdata->dma_rx_sync; - mcbsp->dma_tx_sync = pdata->dma_tx_sync; + + mcbsp->tx_irq = platform_get_irq_byname(pdev, "tx"); + mcbsp->rx_irq = platform_get_irq_byname(pdev, "rx"); + + res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx"); + if (!res) { + dev_err(&pdev->dev, "%s:mcbsp%d has invalid rx DMA channel\n", + __func__, pdev->id); + ret = -ENODEV; + goto err_res; + } + mcbsp->dma_rx_sync = res->start; + + res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx"); + if (!res) { + dev_err(&pdev->dev, "%s:mcbsp%d has invalid tx DMA channel\n", + __func__, pdev->id); + ret = -ENODEV; + goto err_res; + } + mcbsp->dma_tx_sync = res->start; mcbsp->iclk = clk_get(&pdev->dev, "ick"); if (IS_ERR(mcbsp->iclk)) { ret = PTR_ERR(mcbsp->iclk); dev_err(&pdev->dev, "unable to get ick: %d\n", ret); - goto err_iclk; + goto err_res; } mcbsp->fclk = clk_get(&pdev->dev, "fck"); @@ -1817,7 +1856,7 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev) err_fclk: clk_put(mcbsp->iclk); -err_iclk: +err_res: iounmap(mcbsp->io_base); err_ioremap: kfree(mcbsp); -- cgit v1.2.3-18-g5258 From 3cb72fa4fed52437484a699ba78ad926ff4483c5 Mon Sep 17 00:00:00 2001 From: Charulatha V Date: Thu, 24 Feb 2011 12:51:46 -0800 Subject: OMAP2420: hwmod data: Add McBSP Add McBSP hwmod data for OMAP2420. Also add macros in prcm-common.h for idlest bit of OMAP24XX McBSP devices Signed-off-by: Charulatha V Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Shubhrajyoti D Cc: Benoit Cousson Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod_2420_data.c | 129 +++++++++++++++++++++++++++++ arch/arm/mach-omap2/prcm-common.h | 4 + 2 files changed, 133 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index 19ad9d053de..e44ecb46551 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -109,6 +109,8 @@ static struct omap_hwmod omap2420_uart2_hwmod; static struct omap_hwmod omap2420_uart3_hwmod; static struct omap_hwmod omap2420_i2c1_hwmod; static struct omap_hwmod omap2420_i2c2_hwmod; +static struct omap_hwmod omap2420_mcbsp1_hwmod; +static struct omap_hwmod omap2420_mcbsp2_hwmod; /* l4 core -> mcspi1 interface */ static struct omap_hwmod_addr_space omap2420_mcspi1_addr_space[] = { @@ -1390,6 +1392,129 @@ static struct omap_hwmod omap2420_mcspi2_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), }; +/* + * 'mcbsp' class + * multi channel buffered serial port controller + */ + +static struct omap_hwmod_class omap2420_mcbsp_hwmod_class = { + .name = "mcbsp", +}; + +/* mcbsp1 */ +static struct omap_hwmod_irq_info omap2420_mcbsp1_irqs[] = { + { .name = "tx", .irq = 59 }, + { .name = "rx", .irq = 60 }, +}; + +static struct omap_hwmod_dma_info omap2420_mcbsp1_sdma_chs[] = { + { .name = "rx", .dma_req = 32 }, + { .name = "tx", .dma_req = 31 }, +}; + +static struct omap_hwmod_addr_space omap2420_mcbsp1_addrs[] = { + { + .name = "mpu", + .pa_start = 0x48074000, + .pa_end = 0x480740ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> mcbsp1 */ +static struct omap_hwmod_ocp_if omap2420_l4_core__mcbsp1 = { + .master = &omap2420_l4_core_hwmod, + .slave = &omap2420_mcbsp1_hwmod, + .clk = "mcbsp1_ick", + .addr = omap2420_mcbsp1_addrs, + .addr_cnt = ARRAY_SIZE(omap2420_mcbsp1_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mcbsp1 slave ports */ +static struct omap_hwmod_ocp_if *omap2420_mcbsp1_slaves[] = { + &omap2420_l4_core__mcbsp1, +}; + +static struct omap_hwmod omap2420_mcbsp1_hwmod = { + .name = "mcbsp1", + .class = &omap2420_mcbsp_hwmod_class, + .mpu_irqs = omap2420_mcbsp1_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2420_mcbsp1_irqs), + .sdma_reqs = omap2420_mcbsp1_sdma_chs, + .sdma_reqs_cnt = ARRAY_SIZE(omap2420_mcbsp1_sdma_chs), + .main_clk = "mcbsp1_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_MCBSP1_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_MCBSP1_SHIFT, + }, + }, + .slaves = omap2420_mcbsp1_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_mcbsp1_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), +}; + +/* mcbsp2 */ +static struct omap_hwmod_irq_info omap2420_mcbsp2_irqs[] = { + { .name = "tx", .irq = 62 }, + { .name = "rx", .irq = 63 }, +}; + +static struct omap_hwmod_dma_info omap2420_mcbsp2_sdma_chs[] = { + { .name = "rx", .dma_req = 34 }, + { .name = "tx", .dma_req = 33 }, +}; + +static struct omap_hwmod_addr_space omap2420_mcbsp2_addrs[] = { + { + .name = "mpu", + .pa_start = 0x48076000, + .pa_end = 0x480760ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> mcbsp2 */ +static struct omap_hwmod_ocp_if omap2420_l4_core__mcbsp2 = { + .master = &omap2420_l4_core_hwmod, + .slave = &omap2420_mcbsp2_hwmod, + .clk = "mcbsp2_ick", + .addr = omap2420_mcbsp2_addrs, + .addr_cnt = ARRAY_SIZE(omap2420_mcbsp2_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mcbsp2 slave ports */ +static struct omap_hwmod_ocp_if *omap2420_mcbsp2_slaves[] = { + &omap2420_l4_core__mcbsp2, +}; + +static struct omap_hwmod omap2420_mcbsp2_hwmod = { + .name = "mcbsp2", + .class = &omap2420_mcbsp_hwmod_class, + .mpu_irqs = omap2420_mcbsp2_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2420_mcbsp2_irqs), + .sdma_reqs = omap2420_mcbsp2_sdma_chs, + .sdma_reqs_cnt = ARRAY_SIZE(omap2420_mcbsp2_sdma_chs), + .main_clk = "mcbsp2_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_MCBSP2_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_MCBSP2_SHIFT, + }, + }, + .slaves = omap2420_mcbsp2_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_mcbsp2_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), +}; + static __initdata struct omap_hwmod *omap2420_hwmods[] = { &omap2420_l3_main_hwmod, &omap2420_l4_core_hwmod, @@ -1421,6 +1546,10 @@ static __initdata struct omap_hwmod *omap2420_hwmods[] = { /* mailbox class */ &omap2420_mailbox_hwmod, + /* mcbsp class */ + &omap2420_mcbsp1_hwmod, + &omap2420_mcbsp2_hwmod, + /* mcspi class */ &omap2420_mcspi1_hwmod, &omap2420_mcspi2_hwmod, diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index 87486f55978..d4af21d1b61 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -121,6 +121,10 @@ #define OMAP24XX_ST_MCSPI2_MASK (1 << 18) #define OMAP24XX_ST_MCSPI1_SHIFT 17 #define OMAP24XX_ST_MCSPI1_MASK (1 << 17) +#define OMAP24XX_ST_MCBSP2_SHIFT 16 +#define OMAP24XX_ST_MCBSP2_MASK (1 << 16) +#define OMAP24XX_ST_MCBSP1_SHIFT 15 +#define OMAP24XX_ST_MCBSP1_MASK (1 << 15) #define OMAP24XX_ST_GPT12_SHIFT 14 #define OMAP24XX_ST_GPT12_MASK (1 << 14) #define OMAP24XX_ST_GPT11_SHIFT 13 -- cgit v1.2.3-18-g5258 From 37801b3df60a000cc1d65ea8b472e841dc93ea75 Mon Sep 17 00:00:00 2001 From: Charulatha V Date: Thu, 24 Feb 2011 12:51:46 -0800 Subject: OMAP2430: hwmod data: Add McBSP Add McBSP hwmod data for OMAP2430. Added a revision member inorder to facilitate the driver to differentiate between mcbsp in different omap. Signed-off-by: Charulatha V Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Shubhrajyoti D Cc: Benoit Cousson Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod_2430_data.c | 320 +++++++++++++++++++++++++++++ arch/arm/plat-omap/include/plat/mcbsp.h | 2 + 2 files changed, 322 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 91d2581c770..1e65a4f5117 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include @@ -51,6 +52,11 @@ static struct omap_hwmod omap2430_gpio3_hwmod; static struct omap_hwmod omap2430_gpio4_hwmod; static struct omap_hwmod omap2430_gpio5_hwmod; static struct omap_hwmod omap2430_dma_system_hwmod; +static struct omap_hwmod omap2430_mcbsp1_hwmod; +static struct omap_hwmod omap2430_mcbsp2_hwmod; +static struct omap_hwmod omap2430_mcbsp3_hwmod; +static struct omap_hwmod omap2430_mcbsp4_hwmod; +static struct omap_hwmod omap2430_mcbsp5_hwmod; static struct omap_hwmod omap2430_mcspi1_hwmod; static struct omap_hwmod omap2430_mcspi2_hwmod; static struct omap_hwmod omap2430_mcspi3_hwmod; @@ -1575,7 +1581,314 @@ static struct omap_hwmod omap2430_usbhsotg_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) }; +/* + * 'mcbsp' class + * multi channel buffered serial port controller + */ + +static struct omap_hwmod_class_sysconfig omap2430_mcbsp_sysc = { + .rev_offs = 0x007C, + .sysc_offs = 0x008C, + .sysc_flags = (SYSC_HAS_SOFTRESET), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2430_mcbsp_hwmod_class = { + .name = "mcbsp", + .sysc = &omap2430_mcbsp_sysc, + .rev = MCBSP_CONFIG_TYPE2, +}; + +/* mcbsp1 */ +static struct omap_hwmod_irq_info omap2430_mcbsp1_irqs[] = { + { .name = "tx", .irq = 59 }, + { .name = "rx", .irq = 60 }, + { .name = "ovr", .irq = 61 }, + { .name = "common", .irq = 64 }, +}; + +static struct omap_hwmod_dma_info omap2430_mcbsp1_sdma_chs[] = { + { .name = "rx", .dma_req = 32 }, + { .name = "tx", .dma_req = 31 }, +}; + +static struct omap_hwmod_addr_space omap2430_mcbsp1_addrs[] = { + { + .name = "mpu", + .pa_start = 0x48074000, + .pa_end = 0x480740ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> mcbsp1 */ +static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp1 = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_mcbsp1_hwmod, + .clk = "mcbsp1_ick", + .addr = omap2430_mcbsp1_addrs, + .addr_cnt = ARRAY_SIZE(omap2430_mcbsp1_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mcbsp1 slave ports */ +static struct omap_hwmod_ocp_if *omap2430_mcbsp1_slaves[] = { + &omap2430_l4_core__mcbsp1, +}; + +static struct omap_hwmod omap2430_mcbsp1_hwmod = { + .name = "mcbsp1", + .class = &omap2430_mcbsp_hwmod_class, + .mpu_irqs = omap2430_mcbsp1_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2430_mcbsp1_irqs), + .sdma_reqs = omap2430_mcbsp1_sdma_chs, + .sdma_reqs_cnt = ARRAY_SIZE(omap2430_mcbsp1_sdma_chs), + .main_clk = "mcbsp1_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_MCBSP1_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_MCBSP1_SHIFT, + }, + }, + .slaves = omap2430_mcbsp1_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_mcbsp1_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), +}; + +/* mcbsp2 */ +static struct omap_hwmod_irq_info omap2430_mcbsp2_irqs[] = { + { .name = "tx", .irq = 62 }, + { .name = "rx", .irq = 63 }, + { .name = "common", .irq = 16 }, +}; + +static struct omap_hwmod_dma_info omap2430_mcbsp2_sdma_chs[] = { + { .name = "rx", .dma_req = 34 }, + { .name = "tx", .dma_req = 33 }, +}; + +static struct omap_hwmod_addr_space omap2430_mcbsp2_addrs[] = { + { + .name = "mpu", + .pa_start = 0x48076000, + .pa_end = 0x480760ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> mcbsp2 */ +static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp2 = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_mcbsp2_hwmod, + .clk = "mcbsp2_ick", + .addr = omap2430_mcbsp2_addrs, + .addr_cnt = ARRAY_SIZE(omap2430_mcbsp2_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mcbsp2 slave ports */ +static struct omap_hwmod_ocp_if *omap2430_mcbsp2_slaves[] = { + &omap2430_l4_core__mcbsp2, +}; + +static struct omap_hwmod omap2430_mcbsp2_hwmod = { + .name = "mcbsp2", + .class = &omap2430_mcbsp_hwmod_class, + .mpu_irqs = omap2430_mcbsp2_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2430_mcbsp2_irqs), + .sdma_reqs = omap2430_mcbsp2_sdma_chs, + .sdma_reqs_cnt = ARRAY_SIZE(omap2430_mcbsp2_sdma_chs), + .main_clk = "mcbsp2_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_MCBSP2_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_MCBSP2_SHIFT, + }, + }, + .slaves = omap2430_mcbsp2_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_mcbsp2_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), +}; + +/* mcbsp3 */ +static struct omap_hwmod_irq_info omap2430_mcbsp3_irqs[] = { + { .name = "tx", .irq = 89 }, + { .name = "rx", .irq = 90 }, + { .name = "common", .irq = 17 }, +}; + +static struct omap_hwmod_dma_info omap2430_mcbsp3_sdma_chs[] = { + { .name = "rx", .dma_req = 18 }, + { .name = "tx", .dma_req = 17 }, +}; + +static struct omap_hwmod_addr_space omap2430_mcbsp3_addrs[] = { + { + .name = "mpu", + .pa_start = 0x4808C000, + .pa_end = 0x4808C0ff, + .flags = ADDR_TYPE_RT + }, +}; +/* l4_core -> mcbsp3 */ +static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp3 = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_mcbsp3_hwmod, + .clk = "mcbsp3_ick", + .addr = omap2430_mcbsp3_addrs, + .addr_cnt = ARRAY_SIZE(omap2430_mcbsp3_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mcbsp3 slave ports */ +static struct omap_hwmod_ocp_if *omap2430_mcbsp3_slaves[] = { + &omap2430_l4_core__mcbsp3, +}; + +static struct omap_hwmod omap2430_mcbsp3_hwmod = { + .name = "mcbsp3", + .class = &omap2430_mcbsp_hwmod_class, + .mpu_irqs = omap2430_mcbsp3_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2430_mcbsp3_irqs), + .sdma_reqs = omap2430_mcbsp3_sdma_chs, + .sdma_reqs_cnt = ARRAY_SIZE(omap2430_mcbsp3_sdma_chs), + .main_clk = "mcbsp3_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP2430_EN_MCBSP3_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 2, + .idlest_idle_bit = OMAP2430_ST_MCBSP3_SHIFT, + }, + }, + .slaves = omap2430_mcbsp3_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_mcbsp3_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), +}; + +/* mcbsp4 */ +static struct omap_hwmod_irq_info omap2430_mcbsp4_irqs[] = { + { .name = "tx", .irq = 54 }, + { .name = "rx", .irq = 55 }, + { .name = "common", .irq = 18 }, +}; + +static struct omap_hwmod_dma_info omap2430_mcbsp4_sdma_chs[] = { + { .name = "rx", .dma_req = 20 }, + { .name = "tx", .dma_req = 19 }, +}; + +static struct omap_hwmod_addr_space omap2430_mcbsp4_addrs[] = { + { + .name = "mpu", + .pa_start = 0x4808E000, + .pa_end = 0x4808E0ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> mcbsp4 */ +static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp4 = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_mcbsp4_hwmod, + .clk = "mcbsp4_ick", + .addr = omap2430_mcbsp4_addrs, + .addr_cnt = ARRAY_SIZE(omap2430_mcbsp4_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mcbsp4 slave ports */ +static struct omap_hwmod_ocp_if *omap2430_mcbsp4_slaves[] = { + &omap2430_l4_core__mcbsp4, +}; + +static struct omap_hwmod omap2430_mcbsp4_hwmod = { + .name = "mcbsp4", + .class = &omap2430_mcbsp_hwmod_class, + .mpu_irqs = omap2430_mcbsp4_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2430_mcbsp4_irqs), + .sdma_reqs = omap2430_mcbsp4_sdma_chs, + .sdma_reqs_cnt = ARRAY_SIZE(omap2430_mcbsp4_sdma_chs), + .main_clk = "mcbsp4_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP2430_EN_MCBSP4_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 2, + .idlest_idle_bit = OMAP2430_ST_MCBSP4_SHIFT, + }, + }, + .slaves = omap2430_mcbsp4_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_mcbsp4_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), +}; + +/* mcbsp5 */ +static struct omap_hwmod_irq_info omap2430_mcbsp5_irqs[] = { + { .name = "tx", .irq = 81 }, + { .name = "rx", .irq = 82 }, + { .name = "common", .irq = 19 }, +}; + +static struct omap_hwmod_dma_info omap2430_mcbsp5_sdma_chs[] = { + { .name = "rx", .dma_req = 22 }, + { .name = "tx", .dma_req = 21 }, +}; + +static struct omap_hwmod_addr_space omap2430_mcbsp5_addrs[] = { + { + .name = "mpu", + .pa_start = 0x48096000, + .pa_end = 0x480960ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> mcbsp5 */ +static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp5 = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_mcbsp5_hwmod, + .clk = "mcbsp5_ick", + .addr = omap2430_mcbsp5_addrs, + .addr_cnt = ARRAY_SIZE(omap2430_mcbsp5_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mcbsp5 slave ports */ +static struct omap_hwmod_ocp_if *omap2430_mcbsp5_slaves[] = { + &omap2430_l4_core__mcbsp5, +}; + +static struct omap_hwmod omap2430_mcbsp5_hwmod = { + .name = "mcbsp5", + .class = &omap2430_mcbsp_hwmod_class, + .mpu_irqs = omap2430_mcbsp5_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2430_mcbsp5_irqs), + .sdma_reqs = omap2430_mcbsp5_sdma_chs, + .sdma_reqs_cnt = ARRAY_SIZE(omap2430_mcbsp5_sdma_chs), + .main_clk = "mcbsp5_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP2430_EN_MCBSP5_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 2, + .idlest_idle_bit = OMAP2430_ST_MCBSP5_SHIFT, + }, + }, + .slaves = omap2430_mcbsp5_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_mcbsp5_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), +}; static __initdata struct omap_hwmod *omap2430_hwmods[] = { &omap2430_l3_main_hwmod, @@ -1606,6 +1919,13 @@ static __initdata struct omap_hwmod *omap2430_hwmods[] = { /* dma_system class*/ &omap2430_dma_system_hwmod, + /* mcbsp class */ + &omap2430_mcbsp1_hwmod, + &omap2430_mcbsp2_hwmod, + &omap2430_mcbsp3_hwmod, + &omap2430_mcbsp4_hwmod, + &omap2430_mcbsp5_hwmod, + /* mailbox class */ &omap2430_mailbox_hwmod, diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h index dc1a28299ae..64491a5385e 100644 --- a/arch/arm/plat-omap/include/plat/mcbsp.h +++ b/arch/arm/plat-omap/include/plat/mcbsp.h @@ -37,6 +37,8 @@ static struct platform_device omap_mcbsp##port_nr = { \ .id = OMAP_MCBSP##port_nr, \ } +#define MCBSP_CONFIG_TYPE2 0x2 + #define OMAP7XX_MCBSP1_BASE 0xfffb1000 #define OMAP7XX_MCBSP2_BASE 0xfffb1800 -- cgit v1.2.3-18-g5258 From dc48e5fc782f8d447aae2e82ba7453ddcf32c617 Mon Sep 17 00:00:00 2001 From: Charulatha V Date: Thu, 24 Feb 2011 15:16:49 +0530 Subject: OMAP3: hwmod data: Add McBSP Add McBSP hwmod data for OMAP3. Added a revision member inorder to facilitate the driver to differentiate between mcbsp in different omap. Signed-off-by: Charulatha V Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Shubhrajyoti D Cc: Benoit Cousson Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 439 +++++++++++++++++++++++++++++ arch/arm/plat-omap/include/plat/mcbsp.h | 1 + 2 files changed, 440 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 510d5e11a4e..e1d89c0607e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include "omap_hwmod_common_data.h" @@ -72,6 +73,14 @@ static struct omap_hwmod am35xx_usbhsotg_hwmod; static struct omap_hwmod omap3xxx_dma_system_hwmod; +static struct omap_hwmod omap3xxx_mcbsp1_hwmod; +static struct omap_hwmod omap3xxx_mcbsp2_hwmod; +static struct omap_hwmod omap3xxx_mcbsp3_hwmod; +static struct omap_hwmod omap3xxx_mcbsp4_hwmod; +static struct omap_hwmod omap3xxx_mcbsp5_hwmod; +static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod; +static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod; + /* L3 -> L4_CORE interface */ static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_core = { .master = &omap3xxx_l3_main_hwmod, @@ -1729,6 +1738,427 @@ static struct omap_hwmod omap3xxx_dma_system_hwmod = { .flags = HWMOD_NO_IDLEST, }; +/* + * 'mcbsp' class + * multi channel buffered serial port controller + */ + +static struct omap_hwmod_class_sysconfig omap3xxx_mcbsp_sysc = { + .sysc_offs = 0x008c, + .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_ENAWAKEUP | + SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, + .clockact = 0x2, +}; + +static struct omap_hwmod_class omap3xxx_mcbsp_hwmod_class = { + .name = "mcbsp", + .sysc = &omap3xxx_mcbsp_sysc, + .rev = MCBSP_CONFIG_TYPE3, +}; + +/* mcbsp1 */ +static struct omap_hwmod_irq_info omap3xxx_mcbsp1_irqs[] = { + { .name = "irq", .irq = 16 }, + { .name = "tx", .irq = 59 }, + { .name = "rx", .irq = 60 }, +}; + +static struct omap_hwmod_dma_info omap3xxx_mcbsp1_sdma_chs[] = { + { .name = "rx", .dma_req = 32 }, + { .name = "tx", .dma_req = 31 }, +}; + +static struct omap_hwmod_addr_space omap3xxx_mcbsp1_addrs[] = { + { + .name = "mpu", + .pa_start = 0x48074000, + .pa_end = 0x480740ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> mcbsp1 */ +static struct omap_hwmod_ocp_if omap3xxx_l4_core__mcbsp1 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_mcbsp1_hwmod, + .clk = "mcbsp1_ick", + .addr = omap3xxx_mcbsp1_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_mcbsp1_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mcbsp1 slave ports */ +static struct omap_hwmod_ocp_if *omap3xxx_mcbsp1_slaves[] = { + &omap3xxx_l4_core__mcbsp1, +}; + +static struct omap_hwmod omap3xxx_mcbsp1_hwmod = { + .name = "mcbsp1", + .class = &omap3xxx_mcbsp_hwmod_class, + .mpu_irqs = omap3xxx_mcbsp1_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_mcbsp1_irqs), + .sdma_reqs = omap3xxx_mcbsp1_sdma_chs, + .sdma_reqs_cnt = ARRAY_SIZE(omap3xxx_mcbsp1_sdma_chs), + .main_clk = "mcbsp1_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_MCBSP1_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_MCBSP1_SHIFT, + }, + }, + .slaves = omap3xxx_mcbsp1_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp1_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +/* mcbsp2 */ +static struct omap_hwmod_irq_info omap3xxx_mcbsp2_irqs[] = { + { .name = "irq", .irq = 17 }, + { .name = "tx", .irq = 62 }, + { .name = "rx", .irq = 63 }, +}; + +static struct omap_hwmod_dma_info omap3xxx_mcbsp2_sdma_chs[] = { + { .name = "rx", .dma_req = 34 }, + { .name = "tx", .dma_req = 33 }, +}; + +static struct omap_hwmod_addr_space omap3xxx_mcbsp2_addrs[] = { + { + .name = "mpu", + .pa_start = 0x49022000, + .pa_end = 0x490220ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> mcbsp2 */ +static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp2 = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_mcbsp2_hwmod, + .clk = "mcbsp2_ick", + .addr = omap3xxx_mcbsp2_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_mcbsp2_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mcbsp2 slave ports */ +static struct omap_hwmod_ocp_if *omap3xxx_mcbsp2_slaves[] = { + &omap3xxx_l4_per__mcbsp2, +}; + +static struct omap_hwmod omap3xxx_mcbsp2_hwmod = { + .name = "mcbsp2", + .class = &omap3xxx_mcbsp_hwmod_class, + .mpu_irqs = omap3xxx_mcbsp2_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_mcbsp2_irqs), + .sdma_reqs = omap3xxx_mcbsp2_sdma_chs, + .sdma_reqs_cnt = ARRAY_SIZE(omap3xxx_mcbsp2_sdma_chs), + .main_clk = "mcbsp2_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_MCBSP2_SHIFT, + .module_offs = OMAP3430_PER_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_MCBSP2_SHIFT, + }, + }, + .slaves = omap3xxx_mcbsp2_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp2_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +/* mcbsp3 */ +static struct omap_hwmod_irq_info omap3xxx_mcbsp3_irqs[] = { + { .name = "irq", .irq = 22 }, + { .name = "tx", .irq = 89 }, + { .name = "rx", .irq = 90 }, +}; + +static struct omap_hwmod_dma_info omap3xxx_mcbsp3_sdma_chs[] = { + { .name = "rx", .dma_req = 18 }, + { .name = "tx", .dma_req = 17 }, +}; + +static struct omap_hwmod_addr_space omap3xxx_mcbsp3_addrs[] = { + { + .name = "mpu", + .pa_start = 0x49024000, + .pa_end = 0x490240ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> mcbsp3 */ +static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp3 = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_mcbsp3_hwmod, + .clk = "mcbsp3_ick", + .addr = omap3xxx_mcbsp3_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_mcbsp3_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mcbsp3 slave ports */ +static struct omap_hwmod_ocp_if *omap3xxx_mcbsp3_slaves[] = { + &omap3xxx_l4_per__mcbsp3, +}; + +static struct omap_hwmod omap3xxx_mcbsp3_hwmod = { + .name = "mcbsp3", + .class = &omap3xxx_mcbsp_hwmod_class, + .mpu_irqs = omap3xxx_mcbsp3_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_mcbsp3_irqs), + .sdma_reqs = omap3xxx_mcbsp3_sdma_chs, + .sdma_reqs_cnt = ARRAY_SIZE(omap3xxx_mcbsp3_sdma_chs), + .main_clk = "mcbsp3_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_MCBSP3_SHIFT, + .module_offs = OMAP3430_PER_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_MCBSP3_SHIFT, + }, + }, + .slaves = omap3xxx_mcbsp3_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp3_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +/* mcbsp4 */ +static struct omap_hwmod_irq_info omap3xxx_mcbsp4_irqs[] = { + { .name = "irq", .irq = 23 }, + { .name = "tx", .irq = 54 }, + { .name = "rx", .irq = 55 }, +}; + +static struct omap_hwmod_dma_info omap3xxx_mcbsp4_sdma_chs[] = { + { .name = "rx", .dma_req = 20 }, + { .name = "tx", .dma_req = 19 }, +}; + +static struct omap_hwmod_addr_space omap3xxx_mcbsp4_addrs[] = { + { + .name = "mpu", + .pa_start = 0x49026000, + .pa_end = 0x490260ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> mcbsp4 */ +static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp4 = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_mcbsp4_hwmod, + .clk = "mcbsp4_ick", + .addr = omap3xxx_mcbsp4_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_mcbsp4_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mcbsp4 slave ports */ +static struct omap_hwmod_ocp_if *omap3xxx_mcbsp4_slaves[] = { + &omap3xxx_l4_per__mcbsp4, +}; + +static struct omap_hwmod omap3xxx_mcbsp4_hwmod = { + .name = "mcbsp4", + .class = &omap3xxx_mcbsp_hwmod_class, + .mpu_irqs = omap3xxx_mcbsp4_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_mcbsp4_irqs), + .sdma_reqs = omap3xxx_mcbsp4_sdma_chs, + .sdma_reqs_cnt = ARRAY_SIZE(omap3xxx_mcbsp4_sdma_chs), + .main_clk = "mcbsp4_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_MCBSP4_SHIFT, + .module_offs = OMAP3430_PER_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_MCBSP4_SHIFT, + }, + }, + .slaves = omap3xxx_mcbsp4_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp4_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +/* mcbsp5 */ +static struct omap_hwmod_irq_info omap3xxx_mcbsp5_irqs[] = { + { .name = "irq", .irq = 27 }, + { .name = "tx", .irq = 81 }, + { .name = "rx", .irq = 82 }, +}; + +static struct omap_hwmod_dma_info omap3xxx_mcbsp5_sdma_chs[] = { + { .name = "rx", .dma_req = 22 }, + { .name = "tx", .dma_req = 21 }, +}; + +static struct omap_hwmod_addr_space omap3xxx_mcbsp5_addrs[] = { + { + .name = "mpu", + .pa_start = 0x48096000, + .pa_end = 0x480960ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> mcbsp5 */ +static struct omap_hwmod_ocp_if omap3xxx_l4_core__mcbsp5 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_mcbsp5_hwmod, + .clk = "mcbsp5_ick", + .addr = omap3xxx_mcbsp5_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_mcbsp5_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mcbsp5 slave ports */ +static struct omap_hwmod_ocp_if *omap3xxx_mcbsp5_slaves[] = { + &omap3xxx_l4_core__mcbsp5, +}; + +static struct omap_hwmod omap3xxx_mcbsp5_hwmod = { + .name = "mcbsp5", + .class = &omap3xxx_mcbsp_hwmod_class, + .mpu_irqs = omap3xxx_mcbsp5_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_mcbsp5_irqs), + .sdma_reqs = omap3xxx_mcbsp5_sdma_chs, + .sdma_reqs_cnt = ARRAY_SIZE(omap3xxx_mcbsp5_sdma_chs), + .main_clk = "mcbsp5_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_MCBSP5_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_MCBSP5_SHIFT, + }, + }, + .slaves = omap3xxx_mcbsp5_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp5_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; +/* 'mcbsp sidetone' class */ + +static struct omap_hwmod_class_sysconfig omap3xxx_mcbsp_sidetone_sysc = { + .sysc_offs = 0x0010, + .sysc_flags = SYSC_HAS_AUTOIDLE, + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap3xxx_mcbsp_sidetone_hwmod_class = { + .name = "mcbsp_sidetone", + .sysc = &omap3xxx_mcbsp_sidetone_sysc, +}; + +/* mcbsp2_sidetone */ +static struct omap_hwmod_irq_info omap3xxx_mcbsp2_sidetone_irqs[] = { + { .name = "irq", .irq = 4 }, +}; + +static struct omap_hwmod_addr_space omap3xxx_mcbsp2_sidetone_addrs[] = { + { + .name = "sidetone", + .pa_start = 0x49028000, + .pa_end = 0x490280ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> mcbsp2_sidetone */ +static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp2_sidetone = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_mcbsp2_sidetone_hwmod, + .clk = "mcbsp2_ick", + .addr = omap3xxx_mcbsp2_sidetone_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_mcbsp2_sidetone_addrs), + .user = OCP_USER_MPU, +}; + +/* mcbsp2_sidetone slave ports */ +static struct omap_hwmod_ocp_if *omap3xxx_mcbsp2_sidetone_slaves[] = { + &omap3xxx_l4_per__mcbsp2_sidetone, +}; + +static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = { + .name = "mcbsp2_sidetone", + .class = &omap3xxx_mcbsp_sidetone_hwmod_class, + .mpu_irqs = omap3xxx_mcbsp2_sidetone_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_mcbsp2_sidetone_irqs), + .main_clk = "mcbsp2_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_MCBSP2_SHIFT, + .module_offs = OMAP3430_PER_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_MCBSP2_SHIFT, + }, + }, + .slaves = omap3xxx_mcbsp2_sidetone_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp2_sidetone_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +/* mcbsp3_sidetone */ +static struct omap_hwmod_irq_info omap3xxx_mcbsp3_sidetone_irqs[] = { + { .name = "irq", .irq = 5 }, +}; + +static struct omap_hwmod_addr_space omap3xxx_mcbsp3_sidetone_addrs[] = { + { + .name = "sidetone", + .pa_start = 0x4902A000, + .pa_end = 0x4902A0ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> mcbsp3_sidetone */ +static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp3_sidetone = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_mcbsp3_sidetone_hwmod, + .clk = "mcbsp3_ick", + .addr = omap3xxx_mcbsp3_sidetone_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_mcbsp3_sidetone_addrs), + .user = OCP_USER_MPU, +}; + +/* mcbsp3_sidetone slave ports */ +static struct omap_hwmod_ocp_if *omap3xxx_mcbsp3_sidetone_slaves[] = { + &omap3xxx_l4_per__mcbsp3_sidetone, +}; + +static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod = { + .name = "mcbsp3_sidetone", + .class = &omap3xxx_mcbsp_sidetone_hwmod_class, + .mpu_irqs = omap3xxx_mcbsp3_sidetone_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_mcbsp3_sidetone_irqs), + .main_clk = "mcbsp3_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_MCBSP3_SHIFT, + .module_offs = OMAP3430_PER_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_MCBSP3_SHIFT, + }, + }, + .slaves = omap3xxx_mcbsp3_sidetone_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp3_sidetone_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + + /* SR common */ static struct omap_hwmod_sysc_fields omap34xx_sr_sysc_fields = { .clkact_shift = 20, @@ -2321,6 +2751,15 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { /* dma_system class*/ &omap3xxx_dma_system_hwmod, + /* mcbsp class */ + &omap3xxx_mcbsp1_hwmod, + &omap3xxx_mcbsp2_hwmod, + &omap3xxx_mcbsp3_hwmod, + &omap3xxx_mcbsp4_hwmod, + &omap3xxx_mcbsp5_hwmod, + &omap3xxx_mcbsp2_sidetone_hwmod, + &omap3xxx_mcbsp3_sidetone_hwmod, + /* mailbox class */ &omap3xxx_mailbox_hwmod, diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h index 64491a5385e..f084b6acfbf 100644 --- a/arch/arm/plat-omap/include/plat/mcbsp.h +++ b/arch/arm/plat-omap/include/plat/mcbsp.h @@ -38,6 +38,7 @@ static struct platform_device omap_mcbsp##port_nr = { \ } #define MCBSP_CONFIG_TYPE2 0x2 +#define MCBSP_CONFIG_TYPE3 0x3 #define OMAP7XX_MCBSP1_BASE 0xfffb1000 #define OMAP7XX_MCBSP2_BASE 0xfffb1800 -- cgit v1.2.3-18-g5258 From cb7e9ded3240d717d1d24812d33b3ef2c98c084e Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Thu, 24 Feb 2011 15:16:50 +0530 Subject: OMAP4: hwmod: Naming of address space Added a name to address space belonging to SDMA and MPU facilitating the driver to get the address space info by name. Added a revision member inorder to facilitate the driver to differentiate between mcbsp in different omap. Also added a platform_get_irq in probe to get irq number by index since from OMAP4, there will be a single irq line. Signed-off-by: Benoit Cousson Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 8 ++++++++ arch/arm/plat-omap/include/plat/mcbsp.h | 1 + arch/arm/plat-omap/mcbsp.c | 4 ++++ 3 files changed, 13 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 79a86017891..673b011403c 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -25,6 +25,7 @@ #include #include #include +#include #include "omap_hwmod_common_data.h" @@ -2737,6 +2738,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_mcbsp_sysc = { static struct omap_hwmod_class omap44xx_mcbsp_hwmod_class = { .name = "mcbsp", .sysc = &omap44xx_mcbsp_sysc, + .rev = MCBSP_CONFIG_TYPE4, }; /* mcbsp1 */ @@ -2752,6 +2754,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp1_sdma_reqs[] = { static struct omap_hwmod_addr_space omap44xx_mcbsp1_addrs[] = { { + .name = "mpu", .pa_start = 0x40122000, .pa_end = 0x401220ff, .flags = ADDR_TYPE_RT @@ -2770,6 +2773,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp1 = { static struct omap_hwmod_addr_space omap44xx_mcbsp1_dma_addrs[] = { { + .name = "dma", .pa_start = 0x49022000, .pa_end = 0x490220ff, .flags = ADDR_TYPE_RT @@ -2823,6 +2827,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp2_sdma_reqs[] = { static struct omap_hwmod_addr_space omap44xx_mcbsp2_addrs[] = { { + .name = "mpu", .pa_start = 0x40124000, .pa_end = 0x401240ff, .flags = ADDR_TYPE_RT @@ -2841,6 +2846,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp2 = { static struct omap_hwmod_addr_space omap44xx_mcbsp2_dma_addrs[] = { { + .name = "dma", .pa_start = 0x49024000, .pa_end = 0x490240ff, .flags = ADDR_TYPE_RT @@ -2894,6 +2900,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp3_sdma_reqs[] = { static struct omap_hwmod_addr_space omap44xx_mcbsp3_addrs[] = { { + .name = "mpu", .pa_start = 0x40126000, .pa_end = 0x401260ff, .flags = ADDR_TYPE_RT @@ -2912,6 +2919,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp3 = { static struct omap_hwmod_addr_space omap44xx_mcbsp3_dma_addrs[] = { { + .name = "dma", .pa_start = 0x49026000, .pa_end = 0x490260ff, .flags = ADDR_TYPE_RT diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h index f084b6acfbf..afcbb7bb016 100644 --- a/arch/arm/plat-omap/include/plat/mcbsp.h +++ b/arch/arm/plat-omap/include/plat/mcbsp.h @@ -39,6 +39,7 @@ static struct platform_device omap_mcbsp##port_nr = { \ #define MCBSP_CONFIG_TYPE2 0x2 #define MCBSP_CONFIG_TYPE3 0x3 +#define MCBSP_CONFIG_TYPE4 0x4 #define OMAP7XX_MCBSP1_BASE 0xfffb1000 #define OMAP7XX_MCBSP2_BASE 0xfffb1800 diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 5f25ae5f9c1..62bd073b0f8 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -1812,6 +1812,10 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev) mcbsp->tx_irq = platform_get_irq_byname(pdev, "tx"); mcbsp->rx_irq = platform_get_irq_byname(pdev, "rx"); + /* From OMAP4 there will be a single irq line */ + if (mcbsp->tx_irq == -ENXIO) + mcbsp->tx_irq = platform_get_irq(pdev, 0); + res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx"); if (!res) { dev_err(&pdev->dev, "%s:mcbsp%d has invalid rx DMA channel\n", -- cgit v1.2.3-18-g5258 From 8b1906f12a60d377b11d8a3dd256ce0a0ef6c614 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Thu, 24 Feb 2011 15:16:51 +0530 Subject: OMAP3: hwmod: add dev_attr for McBSP sidetone Since the sidetone block is tightly coupled to the mcbsp, sidetone information is directly added to mcbsp2 & 3 hwmod dev_attr. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Benoit Cousson Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 10 ++++++++++ arch/arm/plat-omap/include/plat/mcbsp.h | 9 +++++++++ 2 files changed, 19 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index e1d89c0607e..25226bf063e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1852,6 +1852,10 @@ static struct omap_hwmod_ocp_if *omap3xxx_mcbsp2_slaves[] = { &omap3xxx_l4_per__mcbsp2, }; +static struct omap_mcbsp_dev_attr omap34xx_mcbsp2_dev_attr = { + .sidetone = "mcbsp2_sidetone", +}; + static struct omap_hwmod omap3xxx_mcbsp2_hwmod = { .name = "mcbsp2", .class = &omap3xxx_mcbsp_hwmod_class, @@ -1871,6 +1875,7 @@ static struct omap_hwmod omap3xxx_mcbsp2_hwmod = { }, .slaves = omap3xxx_mcbsp2_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp2_slaves), + .dev_attr = &omap34xx_mcbsp2_dev_attr, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; @@ -1910,6 +1915,10 @@ static struct omap_hwmod_ocp_if *omap3xxx_mcbsp3_slaves[] = { &omap3xxx_l4_per__mcbsp3, }; +static struct omap_mcbsp_dev_attr omap34xx_mcbsp3_dev_attr = { + .sidetone = "mcbsp3_sidetone", +}; + static struct omap_hwmod omap3xxx_mcbsp3_hwmod = { .name = "mcbsp3", .class = &omap3xxx_mcbsp_hwmod_class, @@ -1929,6 +1938,7 @@ static struct omap_hwmod omap3xxx_mcbsp3_hwmod = { }, .slaves = omap3xxx_mcbsp3_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp3_slaves), + .dev_attr = &omap34xx_mcbsp3_dev_attr, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h index afcbb7bb016..1fe06372c9c 100644 --- a/arch/arm/plat-omap/include/plat/mcbsp.h +++ b/arch/arm/plat-omap/include/plat/mcbsp.h @@ -475,6 +475,15 @@ struct omap_mcbsp { #endif void *reg_cache; }; + +/** + * omap_mcbsp_dev_attr - OMAP McBSP device attributes for omap_hwmod + * @sidetone: name of the sidetone device + */ +struct omap_mcbsp_dev_attr { + const char *sidetone; +}; + extern struct omap_mcbsp **mcbsp_ptr; extern int omap_mcbsp_count, omap_mcbsp_cache_size; -- cgit v1.2.3-18-g5258 From 64bcbd33c7c70d0aea4e614212a2568321a0396b Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Thu, 24 Feb 2011 15:16:52 +0530 Subject: OMAP2+: McBSP: hwmod adaptation for McBSP Modify OMAP2+ McBSP to use omap hwmod framework APIs Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Charulatha V Signed-off-by: Shubhrajyoti D Acked-by: Peter Ujfalusi Acked-by: Jarkko Nikula Acked-by: Mark Brown Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/mcbsp.c | 595 +++----------------------------- arch/arm/plat-omap/include/plat/mcbsp.h | 2 +- 2 files changed, 46 insertions(+), 551 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index 765ebe7da72..275d6cfa0b2 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -22,10 +22,10 @@ #include #include #include +#include #include "control.h" - /* McBSP internal signal muxing functions */ void omap2_mcbsp1_mux_clkr_src(u8 mux) @@ -101,573 +101,68 @@ int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id) } EXPORT_SYMBOL(omap2_mcbsp_set_clks_src); - -/* Platform data */ - -#ifdef CONFIG_SOC_OMAP2420 -struct resource omap2420_mcbsp_res[][6] = { +struct omap_device_pm_latency omap2_mcbsp_latency[] = { { - { - .start = OMAP24XX_MCBSP1_BASE, - .end = OMAP24XX_MCBSP1_BASE + SZ_256, - .flags = IORESOURCE_MEM, - }, - { - .name = "rx", - .start = INT_24XX_MCBSP1_IRQ_RX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "tx", - .start = INT_24XX_MCBSP1_IRQ_TX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "rx", - .start = OMAP24XX_DMA_MCBSP1_RX, - .flags = IORESOURCE_DMA, - }, - { - .name = "tx", - .start = OMAP24XX_DMA_MCBSP1_TX, - .flags = IORESOURCE_DMA, - }, - }, - { - { - .start = OMAP24XX_MCBSP2_BASE, - .end = OMAP24XX_MCBSP2_BASE + SZ_256, - .flags = IORESOURCE_MEM, - }, - { - .name = "rx", - .start = INT_24XX_MCBSP2_IRQ_RX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "tx", - .start = INT_24XX_MCBSP2_IRQ_TX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "rx", - .start = OMAP24XX_DMA_MCBSP2_RX, - .flags = IORESOURCE_DMA, - }, - { - .name = "tx", - .start = OMAP24XX_DMA_MCBSP2_TX, - .flags = IORESOURCE_DMA, - }, + .deactivate_func = omap_device_idle_hwmods, + .activate_func = omap_device_enable_hwmods, + .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, }, }; -#define OMAP2420_MCBSP_RES_SZ ARRAY_SIZE(omap2420_mcbsp_res[1]) -#define OMAP2420_MCBSP_COUNT ARRAY_SIZE(omap2420_mcbsp_res) -#else -#define omap2420_mcbsp_res NULL -#define OMAP2420_MCBSP_RES_SZ 0 -#define OMAP2420_MCBSP_COUNT 0 -#endif -#define omap2420_mcbsp_pdata NULL +static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused) +{ + int id, count = 1; + char *name = "omap-mcbsp"; + struct omap_hwmod *oh_device[2]; + struct omap_mcbsp_platform_data *pdata = NULL; + struct omap_device *od; -#ifdef CONFIG_SOC_OMAP2430 -struct resource omap2430_mcbsp_res[][6] = { - { - { - .start = OMAP24XX_MCBSP1_BASE, - .end = OMAP24XX_MCBSP1_BASE + SZ_256, - .flags = IORESOURCE_MEM, - }, - { - .name = "rx", - .start = INT_24XX_MCBSP1_IRQ_RX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "tx", - .start = INT_24XX_MCBSP1_IRQ_TX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "rx", - .start = OMAP24XX_DMA_MCBSP1_RX, - .flags = IORESOURCE_DMA, - }, - { - .name = "tx", - .start = OMAP24XX_DMA_MCBSP1_TX, - .flags = IORESOURCE_DMA, - }, - }, - { - { - .start = OMAP24XX_MCBSP2_BASE, - .end = OMAP24XX_MCBSP2_BASE + SZ_256, - .flags = IORESOURCE_MEM, - }, - { - .name = "rx", - .start = INT_24XX_MCBSP2_IRQ_RX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "tx", - .start = INT_24XX_MCBSP2_IRQ_TX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "rx", - .start = OMAP24XX_DMA_MCBSP2_RX, - .flags = IORESOURCE_DMA, - }, - { - .name = "tx", - .start = OMAP24XX_DMA_MCBSP2_TX, - .flags = IORESOURCE_DMA, - }, - }, - { - { - .start = OMAP2430_MCBSP3_BASE, - .end = OMAP2430_MCBSP3_BASE + SZ_256, - .flags = IORESOURCE_MEM, - }, - { - .name = "rx", - .start = INT_24XX_MCBSP3_IRQ_RX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "tx", - .start = INT_24XX_MCBSP3_IRQ_TX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "rx", - .start = OMAP24XX_DMA_MCBSP3_RX, - .flags = IORESOURCE_DMA, - }, - { - .name = "tx", - .start = OMAP24XX_DMA_MCBSP3_TX, - .flags = IORESOURCE_DMA, - }, - }, - { - { - .start = OMAP2430_MCBSP4_BASE, - .end = OMAP2430_MCBSP4_BASE + SZ_256, - .flags = IORESOURCE_MEM, - }, - { - .name = "rx", - .start = INT_24XX_MCBSP4_IRQ_RX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "tx", - .start = INT_24XX_MCBSP4_IRQ_TX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "rx", - .start = OMAP24XX_DMA_MCBSP4_RX, - .flags = IORESOURCE_DMA, - }, - { - .name = "tx", - .start = OMAP24XX_DMA_MCBSP4_TX, - .flags = IORESOURCE_DMA, - }, - }, - { - { - .start = OMAP2430_MCBSP5_BASE, - .end = OMAP2430_MCBSP5_BASE + SZ_256, - .flags = IORESOURCE_MEM, - }, - { - .name = "rx", - .start = INT_24XX_MCBSP5_IRQ_RX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "tx", - .start = INT_24XX_MCBSP5_IRQ_TX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "rx", - .start = OMAP24XX_DMA_MCBSP5_RX, - .flags = IORESOURCE_DMA, - }, - { - .name = "tx", - .start = OMAP24XX_DMA_MCBSP5_TX, - .flags = IORESOURCE_DMA, - }, - }, -}; -#define OMAP2430_MCBSP_RES_SZ ARRAY_SIZE(omap2430_mcbsp_res[1]) -#define OMAP2430_MCBSP_COUNT ARRAY_SIZE(omap2430_mcbsp_res) -#else -#define omap2430_mcbsp_res NULL -#define OMAP2430_MCBSP_RES_SZ 0 -#define OMAP2430_MCBSP_COUNT 0 -#endif + sscanf(oh->name, "mcbsp%d", &id); -#define omap2430_mcbsp_pdata NULL + pdata = kzalloc(sizeof(struct omap_mcbsp_platform_data), GFP_KERNEL); + if (!pdata) { + pr_err("%s: No memory for mcbsp\n", __func__); + return -ENOMEM; + } -#ifdef CONFIG_ARCH_OMAP3 -struct resource omap34xx_mcbsp_res[][7] = { - { - { - .start = OMAP34XX_MCBSP1_BASE, - .end = OMAP34XX_MCBSP1_BASE + SZ_256, - .flags = IORESOURCE_MEM, - }, - { - .name = "rx", - .start = INT_24XX_MCBSP1_IRQ_RX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "tx", - .start = INT_24XX_MCBSP1_IRQ_TX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "rx", - .start = OMAP24XX_DMA_MCBSP1_RX, - .flags = IORESOURCE_DMA, - }, - { - .name = "tx", - .start = OMAP24XX_DMA_MCBSP1_TX, - .flags = IORESOURCE_DMA, - }, - }, - { - { - .start = OMAP34XX_MCBSP2_BASE, - .end = OMAP34XX_MCBSP2_BASE + SZ_256, - .flags = IORESOURCE_MEM, - }, - { - .name = "sidetone", - .start = OMAP34XX_MCBSP2_ST_BASE, - .end = OMAP34XX_MCBSP2_ST_BASE + SZ_256, - .flags = IORESOURCE_MEM, - }, - { - .name = "rx", - .start = INT_24XX_MCBSP2_IRQ_RX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "tx", - .start = INT_24XX_MCBSP2_IRQ_TX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "rx", - .start = OMAP24XX_DMA_MCBSP2_RX, - .flags = IORESOURCE_DMA, - }, - { - .name = "tx", - .start = OMAP24XX_DMA_MCBSP2_TX, - .flags = IORESOURCE_DMA, - }, - }, - { - { - .start = OMAP34XX_MCBSP3_BASE, - .end = OMAP34XX_MCBSP3_BASE + SZ_256, - .flags = IORESOURCE_MEM, - }, - { - .name = "sidetone", - .start = OMAP34XX_MCBSP3_ST_BASE, - .end = OMAP34XX_MCBSP3_ST_BASE + SZ_256, - .flags = IORESOURCE_MEM, - }, - { - .name = "rx", - .start = INT_24XX_MCBSP3_IRQ_RX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "tx", - .start = INT_24XX_MCBSP3_IRQ_TX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "rx", - .start = OMAP24XX_DMA_MCBSP3_RX, - .flags = IORESOURCE_DMA, - }, - { - .name = "tx", - .start = OMAP24XX_DMA_MCBSP3_TX, - .flags = IORESOURCE_DMA, - }, - }, - { - { - .start = OMAP34XX_MCBSP4_BASE, - .end = OMAP34XX_MCBSP4_BASE + SZ_256, - .flags = IORESOURCE_MEM, - }, - { - .name = "rx", - .start = INT_24XX_MCBSP4_IRQ_RX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "tx", - .start = INT_24XX_MCBSP4_IRQ_TX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "rx", - .start = OMAP24XX_DMA_MCBSP4_RX, - .flags = IORESOURCE_DMA, - }, - { - .name = "tx", - .start = OMAP24XX_DMA_MCBSP4_TX, - .flags = IORESOURCE_DMA, - }, - }, - { - { - .start = OMAP34XX_MCBSP5_BASE, - .end = OMAP34XX_MCBSP5_BASE + SZ_256, - .flags = IORESOURCE_MEM, - }, - { - .name = "rx", - .start = INT_24XX_MCBSP5_IRQ_RX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "tx", - .start = INT_24XX_MCBSP5_IRQ_TX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "rx", - .start = OMAP24XX_DMA_MCBSP5_RX, - .flags = IORESOURCE_DMA, - }, - { - .name = "tx", - .start = OMAP24XX_DMA_MCBSP5_TX, - .flags = IORESOURCE_DMA, - }, - }, -}; + if (oh->class->rev == MCBSP_CONFIG_TYPE3) { + if (id == 2) + /* The FIFO has 1024 + 256 locations */ + pdata->buffer_size = 0x500; + else + /* The FIFO has 128 locations */ + pdata->buffer_size = 0x80; + } -static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { - { - .buffer_size = 0x80, /* The FIFO has 128 locations */ - }, - { - .buffer_size = 0x500, /* The FIFO has 1024 + 256 locations */ - }, - { - .buffer_size = 0x80, /* The FIFO has 128 locations */ - }, - { - .buffer_size = 0x80, /* The FIFO has 128 locations */ - }, - { - .buffer_size = 0x80, /* The FIFO has 128 locations */ - }, -}; -#define OMAP34XX_MCBSP_RES_SZ ARRAY_SIZE(omap34xx_mcbsp_res[1]) -#define OMAP34XX_MCBSP_COUNT ARRAY_SIZE(omap34xx_mcbsp_res) -#else -#define omap34xx_mcbsp_pdata NULL -#define omap34XX_mcbsp_res NULL -#define OMAP34XX_MCBSP_RES_SZ 0 -#define OMAP34XX_MCBSP_COUNT 0 -#endif + oh_device[0] = oh; -struct resource omap44xx_mcbsp_res[][6] = { - { - { - .name = "mpu", - .start = OMAP44XX_MCBSP1_BASE, - .end = OMAP44XX_MCBSP1_BASE + SZ_256, - .flags = IORESOURCE_MEM, - }, - { - .name = "dma", - .start = OMAP44XX_MCBSP1_DMA_BASE, - .end = OMAP44XX_MCBSP1_DMA_BASE + SZ_256, - .flags = IORESOURCE_MEM, - }, - { - .name = "rx", - .start = 0, - .flags = IORESOURCE_IRQ, - }, - { - .name = "tx", - .start = OMAP44XX_IRQ_MCBSP1, - .flags = IORESOURCE_IRQ, - }, - { - .name = "rx", - .start = OMAP44XX_DMA_MCBSP1_RX, - .flags = IORESOURCE_DMA, - }, - { - .name = "tx", - .start = OMAP44XX_DMA_MCBSP1_TX, - .flags = IORESOURCE_DMA, - }, - }, - { - { - .name = "mpu", - .start = OMAP44XX_MCBSP2_BASE, - .end = OMAP44XX_MCBSP2_BASE + SZ_256, - .flags = IORESOURCE_MEM, - }, - { - .name = "dma", - .start = OMAP44XX_MCBSP2_DMA_BASE, - .end = OMAP44XX_MCBSP2_DMA_BASE + SZ_256, - .flags = IORESOURCE_MEM, - }, - { - .name = "rx", - .start = 0, - .flags = IORESOURCE_IRQ, - }, - { - .name = "tx", - .start = OMAP44XX_IRQ_MCBSP2, - .flags = IORESOURCE_IRQ, - }, - { - .name = "rx", - .start = OMAP44XX_DMA_MCBSP2_RX, - .flags = IORESOURCE_DMA, - }, - { - .name = "tx", - .start = OMAP44XX_DMA_MCBSP2_TX, - .flags = IORESOURCE_DMA, - }, - }, - { - { - .name = "mpu", - .start = OMAP44XX_MCBSP3_BASE, - .end = OMAP44XX_MCBSP3_BASE + SZ_256, - .flags = IORESOURCE_MEM, - }, - { - .name = "dma", - .start = OMAP44XX_MCBSP3_DMA_BASE, - .end = OMAP44XX_MCBSP3_DMA_BASE + SZ_256, - .flags = IORESOURCE_MEM, - }, - { - .name = "rx", - .start = 0, - .flags = IORESOURCE_IRQ, - }, - { - .name = "tx", - .start = OMAP44XX_IRQ_MCBSP3, - .flags = IORESOURCE_IRQ, - }, - { - .name = "rx", - .start = OMAP44XX_DMA_MCBSP3_RX, - .flags = IORESOURCE_DMA, - }, - { - .name = "tx", - .start = OMAP44XX_DMA_MCBSP3_TX, - .flags = IORESOURCE_DMA, - }, - }, - { - { - .start = OMAP44XX_MCBSP4_BASE, - .end = OMAP44XX_MCBSP4_BASE + SZ_256, - .flags = IORESOURCE_MEM, - }, - { - .name = "rx", - .start = 0, - .flags = IORESOURCE_IRQ, - }, - { - .name = "tx", - .start = OMAP44XX_IRQ_MCBSP4, - .flags = IORESOURCE_IRQ, - }, - { - .name = "rx", - .start = OMAP44XX_DMA_MCBSP4_RX, - .flags = IORESOURCE_DMA, - }, - { - .name = "tx", - .start = OMAP44XX_DMA_MCBSP4_TX, - .flags = IORESOURCE_DMA, - }, - }, -}; -#define omap44xx_mcbsp_pdata NULL -#define OMAP44XX_MCBSP_RES_SZ ARRAY_SIZE(omap44xx_mcbsp_res[1]) -#define OMAP44XX_MCBSP_COUNT ARRAY_SIZE(omap44xx_mcbsp_res) + if (oh->dev_attr) { + oh_device[1] = omap_hwmod_lookup(( + (struct omap_mcbsp_dev_attr *)(oh->dev_attr))->sidetone); + count++; + } + od = omap_device_build_ss(name, id, oh_device, count, pdata, + sizeof(*pdata), omap2_mcbsp_latency, + ARRAY_SIZE(omap2_mcbsp_latency), false); + kfree(pdata); + if (IS_ERR(od)) { + pr_err("%s: Cant build omap_device for %s:%s.\n", __func__, + name, oh->name); + return PTR_ERR(od); + } + omap_mcbsp_count++; + return 0; +} static int __init omap2_mcbsp_init(void) { - if (cpu_is_omap2420()) - omap_mcbsp_count = OMAP2420_MCBSP_COUNT; - else if (cpu_is_omap2430()) - omap_mcbsp_count = OMAP2430_MCBSP_COUNT; - else if (cpu_is_omap34xx()) - omap_mcbsp_count = OMAP34XX_MCBSP_COUNT; - else if (cpu_is_omap44xx()) - omap_mcbsp_count = OMAP44XX_MCBSP_COUNT; + omap_hwmod_for_each_by_class("mcbsp", omap_init_mcbsp, NULL); mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *), GFP_KERNEL); if (!mcbsp_ptr) return -ENOMEM; - if (cpu_is_omap2420()) - omap_mcbsp_register_board_cfg(omap2420_mcbsp_res[0], - OMAP2420_MCBSP_RES_SZ, - omap2420_mcbsp_pdata, - OMAP2420_MCBSP_COUNT); - if (cpu_is_omap2430()) - omap_mcbsp_register_board_cfg(omap2430_mcbsp_res[0], - OMAP2420_MCBSP_RES_SZ, - omap2430_mcbsp_pdata, - OMAP2430_MCBSP_COUNT); - if (cpu_is_omap34xx()) - omap_mcbsp_register_board_cfg(omap34xx_mcbsp_res[0], - OMAP34XX_MCBSP_RES_SZ, - omap34xx_mcbsp_pdata, - OMAP34XX_MCBSP_COUNT); - if (cpu_is_omap44xx()) - omap_mcbsp_register_board_cfg(omap44xx_mcbsp_res[0], - OMAP44XX_MCBSP_RES_SZ, - omap44xx_mcbsp_pdata, - OMAP44XX_MCBSP_COUNT); - return omap_mcbsp_init(); } arch_initcall(omap2_mcbsp_init); diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h index 1fe06372c9c..c6cabfc77a1 100644 --- a/arch/arm/plat-omap/include/plat/mcbsp.h +++ b/arch/arm/plat-omap/include/plat/mcbsp.h @@ -421,8 +421,8 @@ struct omap_mcbsp_platform_data { #ifdef CONFIG_ARCH_OMAP3 /* Sidetone block for McBSP 2 and 3 */ unsigned long phys_base_st; - u16 buffer_size; #endif + u16 buffer_size; }; struct omap_mcbsp_st_data { -- cgit v1.2.3-18-g5258 From f36d01d64f1caf0545214a5dc14096477f68cfbe Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Thu, 24 Feb 2011 15:16:53 +0530 Subject: OMAP: McBSP: use omap_device APIs to modify SYSCONFIG McBSP2/3 in OMAP3 has sidetone feature which requires autoidle to be disabled before starting the sidetone. Also SYSCONFIG register has to be set with smart idle or no idle depending on the dma op mode (threshold or element sync). For doing these operations dynamically at runtime, omap_device APIs are used to modify SYSCONFIG register. Signed-off-by: Kishon Vijay Abraham I Cc: Paul Walmsley Acked-by: Peter Ujfalusi Acked-by: Jarkko Nikula Acked-by: Mark Brown [tony@atomide.com: updated to compile without omap_device idle calls] Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/mcbsp.c | 59 ++++++++++++++++++++-------------------------- 1 file changed, 26 insertions(+), 33 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 62bd073b0f8..67ec74ea253 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -27,6 +27,7 @@ #include #include +#include /* XXX These "sideways" includes are a sign that something is wrong */ #include "../mach-omap2/cm2xxx_3xxx.h" @@ -228,9 +229,19 @@ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config) EXPORT_SYMBOL(omap_mcbsp_config); #ifdef CONFIG_ARCH_OMAP3 +static struct omap_device *find_omap_device_by_dev(struct device *dev) +{ + struct platform_device *pdev = container_of(dev, + struct platform_device, dev); + return container_of(pdev, struct omap_device, pdev); +} + static void omap_st_on(struct omap_mcbsp *mcbsp) { unsigned int w; + struct omap_device *od; + + od = find_omap_device_by_dev(mcbsp->dev); /* * Sidetone uses McBSP ICLK - which must not idle when sidetones @@ -244,9 +255,6 @@ static void omap_st_on(struct omap_mcbsp *mcbsp) w = MCBSP_READ(mcbsp, SSELCR); MCBSP_WRITE(mcbsp, SSELCR, w | SIDETONEEN); - w = MCBSP_ST_READ(mcbsp, SYSCONFIG); - MCBSP_ST_WRITE(mcbsp, SYSCONFIG, w & ~(ST_AUTOIDLE)); - /* Enable Sidetone from Sidetone Core */ w = MCBSP_ST_READ(mcbsp, SSELCR); MCBSP_ST_WRITE(mcbsp, SSELCR, w | ST_SIDETONEEN); @@ -255,13 +263,13 @@ static void omap_st_on(struct omap_mcbsp *mcbsp) static void omap_st_off(struct omap_mcbsp *mcbsp) { unsigned int w; + struct omap_device *od; + + od = find_omap_device_by_dev(mcbsp->dev); w = MCBSP_ST_READ(mcbsp, SSELCR); MCBSP_ST_WRITE(mcbsp, SSELCR, w & ~(ST_SIDETONEEN)); - w = MCBSP_ST_READ(mcbsp, SYSCONFIG); - MCBSP_ST_WRITE(mcbsp, SYSCONFIG, w | ST_AUTOIDLE); - w = MCBSP_READ(mcbsp, SSELCR); MCBSP_WRITE(mcbsp, SSELCR, w & ~(SIDETONEEN)); @@ -273,9 +281,9 @@ static void omap_st_off(struct omap_mcbsp *mcbsp) static void omap_st_fir_write(struct omap_mcbsp *mcbsp, s16 *fir) { u16 val, i; + struct omap_device *od; - val = MCBSP_ST_READ(mcbsp, SYSCONFIG); - MCBSP_ST_WRITE(mcbsp, SYSCONFIG, val & ~(ST_AUTOIDLE)); + od = find_omap_device_by_dev(mcbsp->dev); val = MCBSP_ST_READ(mcbsp, SSELCR); @@ -303,9 +311,9 @@ static void omap_st_chgain(struct omap_mcbsp *mcbsp) { u16 w; struct omap_mcbsp_st_data *st_data = mcbsp->st_data; + struct omap_device *od; - w = MCBSP_ST_READ(mcbsp, SYSCONFIG); - MCBSP_ST_WRITE(mcbsp, SYSCONFIG, w & ~(ST_AUTOIDLE)); + od = find_omap_device_by_dev(mcbsp->dev); w = MCBSP_ST_READ(mcbsp, SSELCR); @@ -648,48 +656,33 @@ EXPORT_SYMBOL(omap_mcbsp_get_dma_op_mode); static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp) { + struct omap_device *od; + + od = find_omap_device_by_dev(mcbsp->dev); /* * Enable wakup behavior, smart idle and all wakeups * REVISIT: some wakeups may be unnecessary */ if (cpu_is_omap34xx() || cpu_is_omap44xx()) { - u16 syscon; - - syscon = MCBSP_READ(mcbsp, SYSCON); - syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03)); - - if (mcbsp->dma_op_mode == MCBSP_DMA_MODE_THRESHOLD) { - syscon |= (ENAWAKEUP | SIDLEMODE(0x02) | - CLOCKACTIVITY(0x02)); - MCBSP_WRITE(mcbsp, WAKEUPEN, XRDYEN | RRDYEN); - } else { - syscon |= SIDLEMODE(0x01); - } - - MCBSP_WRITE(mcbsp, SYSCON, syscon); + MCBSP_WRITE(mcbsp, WAKEUPEN, XRDYEN | RRDYEN); } } static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp) { + struct omap_device *od; + + od = find_omap_device_by_dev(mcbsp->dev); + /* * Disable wakup behavior, smart idle and all wakeups */ if (cpu_is_omap34xx() || cpu_is_omap44xx()) { - u16 syscon; - - syscon = MCBSP_READ(mcbsp, SYSCON); - syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03)); /* * HW bug workaround - If no_idle mode is taken, we need to * go to smart_idle before going to always_idle, or the * device will not hit retention anymore. */ - syscon |= SIDLEMODE(0x02); - MCBSP_WRITE(mcbsp, SYSCON, syscon); - - syscon &= ~(SIDLEMODE(0x03)); - MCBSP_WRITE(mcbsp, SYSCON, syscon); MCBSP_WRITE(mcbsp, WAKEUPEN, 0); } -- cgit v1.2.3-18-g5258 From e95496d4acadd0b72c4947be61e8d44700fdaae7 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Thu, 24 Feb 2011 15:16:54 +0530 Subject: OMAP: McBSP: Add pm runtime support Add pm runtime support for McBSP driver. Reference to fclk is not removed because it is required when the functional clock is switched from one source to another. Signed-off-by: Kishon Vijay Abraham I Cc: Paul Walmsley Acked-by: Peter Ujfalusi Acked-by: Jarkko Nikula Acked-by: Mark Brown Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/mcbsp.c | 5 +++-- arch/arm/plat-omap/include/plat/mcbsp.h | 1 - arch/arm/plat-omap/mcbsp.c | 23 ++++++----------------- 3 files changed, 9 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index 275d6cfa0b2..4ada6a9ca4a 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -23,6 +23,7 @@ #include #include #include +#include #include "control.h" @@ -83,7 +84,7 @@ int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id) return -EINVAL; } - clk_disable(mcbsp->fclk); + pm_runtime_put_sync(mcbsp->dev); r = clk_set_parent(mcbsp->fclk, fck_src); if (IS_ERR_VALUE(r)) { @@ -93,7 +94,7 @@ int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id) return -EINVAL; } - clk_enable(mcbsp->fclk); + pm_runtime_get_sync(mcbsp->dev); clk_put(fck_src); diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h index c6cabfc77a1..964a940c475 100644 --- a/arch/arm/plat-omap/include/plat/mcbsp.h +++ b/arch/arm/plat-omap/include/plat/mcbsp.h @@ -465,7 +465,6 @@ struct omap_mcbsp { /* Protect the field .free, while checking if the mcbsp is in use */ spinlock_t lock; struct omap_mcbsp_platform_data *pdata; - struct clk *iclk; struct clk *fclk; #ifdef CONFIG_ARCH_OMAP3 struct omap_mcbsp_st_data *st_data; diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 67ec74ea253..6d230164b4f 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -28,6 +28,7 @@ #include #include #include +#include /* XXX These "sideways" includes are a sign that something is wrong */ #include "../mach-omap2/cm2xxx_3xxx.h" @@ -757,8 +758,7 @@ int omap_mcbsp_request(unsigned int id) if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->request) mcbsp->pdata->ops->request(id); - clk_enable(mcbsp->iclk); - clk_enable(mcbsp->fclk); + pm_runtime_get_sync(mcbsp->dev); /* Do procedure specific to omap34xx arch, if applicable */ omap34xx_mcbsp_request(mcbsp); @@ -806,8 +806,7 @@ err_clk_disable: /* Do procedure specific to omap34xx arch, if applicable */ omap34xx_mcbsp_free(mcbsp); - clk_disable(mcbsp->fclk); - clk_disable(mcbsp->iclk); + pm_runtime_put_sync(mcbsp->dev); spin_lock(&mcbsp->lock); mcbsp->free = true; @@ -837,8 +836,7 @@ void omap_mcbsp_free(unsigned int id) /* Do procedure specific to omap34xx arch, if applicable */ omap34xx_mcbsp_free(mcbsp); - clk_disable(mcbsp->fclk); - clk_disable(mcbsp->iclk); + pm_runtime_put_sync(mcbsp->dev); if (mcbsp->io_type == OMAP_MCBSP_IRQ_IO) { /* Free IRQs */ @@ -1827,32 +1825,24 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev) } mcbsp->dma_tx_sync = res->start; - mcbsp->iclk = clk_get(&pdev->dev, "ick"); - if (IS_ERR(mcbsp->iclk)) { - ret = PTR_ERR(mcbsp->iclk); - dev_err(&pdev->dev, "unable to get ick: %d\n", ret); - goto err_res; - } - mcbsp->fclk = clk_get(&pdev->dev, "fck"); if (IS_ERR(mcbsp->fclk)) { ret = PTR_ERR(mcbsp->fclk); dev_err(&pdev->dev, "unable to get fck: %d\n", ret); - goto err_fclk; + goto err_res; } mcbsp->pdata = pdata; mcbsp->dev = &pdev->dev; mcbsp_ptr[id] = mcbsp; platform_set_drvdata(pdev, mcbsp); + pm_runtime_enable(mcbsp->dev); /* Initialize mcbsp properties for OMAP34XX if needed / applicable */ omap34xx_device_init(mcbsp); return 0; -err_fclk: - clk_put(mcbsp->iclk); err_res: iounmap(mcbsp->io_base); err_ioremap: @@ -1875,7 +1865,6 @@ static int __devexit omap_mcbsp_remove(struct platform_device *pdev) omap34xx_device_exit(mcbsp); clk_put(mcbsp->fclk); - clk_put(mcbsp->iclk); iounmap(mcbsp->io_base); kfree(mcbsp); -- cgit v1.2.3-18-g5258 From 9504ba64f014cfd50a64106e49c8ba729522db5b Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Thu, 24 Feb 2011 15:16:55 +0530 Subject: OMAP: McBSP: APIs to pass DMA params from McBSP driver to client drivers After McBSP driver is hwmod adapted, the information about the hw would be obtained from the hwmod database by the mcbsp driver. Since DMA programming is handled by the client driver, APIs are provided to pass the DMA channel number and base address of data register required by the client driver for DMA programming. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Charulatha V Acked-by: Peter Ujfalusi Acked-by: Jarkko Nikula Acked-by: Mark Brown Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/mcbsp.c | 2 ++ arch/arm/plat-omap/include/plat/mcbsp.h | 7 ++++ arch/arm/plat-omap/mcbsp.c | 64 +++++++++++++++++++++++++++++++++ 3 files changed, 73 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index 4ada6a9ca4a..565b9064a32 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -126,6 +126,8 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused) return -ENOMEM; } + pdata->mcbsp_config_type = oh->class->rev; + if (oh->class->rev == MCBSP_CONFIG_TYPE3) { if (id == 2) /* The FIFO has 1024 + 256 locations */ diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h index 964a940c475..21c9b104c61 100644 --- a/arch/arm/plat-omap/include/plat/mcbsp.h +++ b/arch/arm/plat-omap/include/plat/mcbsp.h @@ -81,6 +81,8 @@ static struct platform_device omap_mcbsp##port_nr = { \ #define OMAP_MCBSP_REG_DRR1 0x02 #define OMAP_MCBSP_REG_DXR2 0x04 #define OMAP_MCBSP_REG_DXR1 0x06 +#define OMAP_MCBSP_REG_DRR 0x02 +#define OMAP_MCBSP_REG_DXR 0x06 #define OMAP_MCBSP_REG_SPCR2 0x08 #define OMAP_MCBSP_REG_SPCR1 0x0a #define OMAP_MCBSP_REG_RCR2 0x0c @@ -423,6 +425,7 @@ struct omap_mcbsp_platform_data { unsigned long phys_base_st; #endif u16 buffer_size; + unsigned int mcbsp_config_type; }; struct omap_mcbsp_st_data { @@ -473,6 +476,7 @@ struct omap_mcbsp { u16 max_rx_thres; #endif void *reg_cache; + unsigned int mcbsp_config_type; }; /** @@ -541,6 +545,9 @@ int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type); void omap2_mcbsp1_mux_clkr_src(u8 mux); void omap2_mcbsp1_mux_fsr_src(u8 mux); +int omap_mcbsp_dma_ch_params(unsigned int id, unsigned int stream); +int omap_mcbsp_dma_reg_params(unsigned int id, unsigned int stream); + #ifdef CONFIG_ARCH_OMAP3 /* Sidetone specific API */ int omap_st_set_chgain(unsigned int id, int channel, s16 chgain); diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 6d230164b4f..d598d9fd65a 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -229,6 +229,69 @@ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config) } EXPORT_SYMBOL(omap_mcbsp_config); +/** + * omap_mcbsp_dma_params - returns the dma channel number + * @id - mcbsp id + * @stream - indicates the direction of data flow (rx or tx) + * + * Returns the dma channel number for the rx channel or tx channel + * based on the value of @stream for the requested mcbsp given by @id + */ +int omap_mcbsp_dma_ch_params(unsigned int id, unsigned int stream) +{ + struct omap_mcbsp *mcbsp; + + if (!omap_mcbsp_check_valid_id(id)) { + printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); + return -ENODEV; + } + mcbsp = id_to_mcbsp_ptr(id); + + if (stream) + return mcbsp->dma_rx_sync; + else + return mcbsp->dma_tx_sync; +} +EXPORT_SYMBOL(omap_mcbsp_dma_ch_params); + +/** + * omap_mcbsp_dma_reg_params - returns the address of mcbsp data register + * @id - mcbsp id + * @stream - indicates the direction of data flow (rx or tx) + * + * Returns the address of mcbsp data transmit register or data receive register + * to be used by DMA for transferring/receiving data based on the value of + * @stream for the requested mcbsp given by @id + */ +int omap_mcbsp_dma_reg_params(unsigned int id, unsigned int stream) +{ + struct omap_mcbsp *mcbsp; + int data_reg; + + if (!omap_mcbsp_check_valid_id(id)) { + printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); + return -ENODEV; + } + mcbsp = id_to_mcbsp_ptr(id); + + data_reg = mcbsp->phys_dma_base; + + if (mcbsp->mcbsp_config_type < MCBSP_CONFIG_TYPE2) { + if (stream) + data_reg += OMAP_MCBSP_REG_DRR1; + else + data_reg += OMAP_MCBSP_REG_DXR1; + } else { + if (stream) + data_reg += OMAP_MCBSP_REG_DRR; + else + data_reg += OMAP_MCBSP_REG_DXR; + } + + return data_reg; +} +EXPORT_SYMBOL(omap_mcbsp_dma_reg_params); + #ifdef CONFIG_ARCH_OMAP3 static struct omap_device *find_omap_device_by_dev(struct device *dev) { @@ -1835,6 +1898,7 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev) mcbsp->pdata = pdata; mcbsp->dev = &pdev->dev; mcbsp_ptr[id] = mcbsp; + mcbsp->mcbsp_config_type = pdata->mcbsp_config_type; platform_set_drvdata(pdev, mcbsp); pm_runtime_enable(mcbsp->dev); -- cgit v1.2.3-18-g5258 From b176654e7796b2812632e7c4a1a4b6efbfae5f1b Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Thu, 24 Feb 2011 15:16:57 +0530 Subject: OMAP: hwmod: Removal of macros for data that is obtained from hwmod database Information like base address and DMA channel nubers should no longer be obtained using macros. These information should be obtained from hwmod database. Hence the macros that define the base address are removed. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Charulatha V Acked-by: Peter Ujfalusi Acked-by: Jarkko Nikula Acked-by: Mark Brown Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/mcbsp.h | 25 +------------------------ 1 file changed, 1 insertion(+), 24 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h index 21c9b104c61..f8f690ab299 100644 --- a/arch/arm/plat-omap/include/plat/mcbsp.h +++ b/arch/arm/plat-omap/include/plat/mcbsp.h @@ -52,30 +52,7 @@ static struct platform_device omap_mcbsp##port_nr = { \ #define OMAP1610_MCBSP2_BASE 0xfffb1000 #define OMAP1610_MCBSP3_BASE 0xe1017000 -#define OMAP24XX_MCBSP1_BASE 0x48074000 -#define OMAP24XX_MCBSP2_BASE 0x48076000 -#define OMAP2430_MCBSP3_BASE 0x4808c000 -#define OMAP2430_MCBSP4_BASE 0x4808e000 -#define OMAP2430_MCBSP5_BASE 0x48096000 - -#define OMAP34XX_MCBSP1_BASE 0x48074000 -#define OMAP34XX_MCBSP2_BASE 0x49022000 -#define OMAP34XX_MCBSP2_ST_BASE 0x49028000 -#define OMAP34XX_MCBSP3_BASE 0x49024000 -#define OMAP34XX_MCBSP3_ST_BASE 0x4902A000 -#define OMAP34XX_MCBSP3_BASE 0x49024000 -#define OMAP34XX_MCBSP4_BASE 0x49026000 -#define OMAP34XX_MCBSP5_BASE 0x48096000 - -#define OMAP44XX_MCBSP1_BASE 0x40122000 -#define OMAP44XX_MCBSP1_DMA_BASE 0x49022000 -#define OMAP44XX_MCBSP2_BASE 0x40124000 -#define OMAP44XX_MCBSP2_DMA_BASE 0x49024000 -#define OMAP44XX_MCBSP3_BASE 0x40126000 -#define OMAP44XX_MCBSP3_DMA_BASE 0x49026000 -#define OMAP44XX_MCBSP4_BASE 0x48096000 - -#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) +#ifdef CONFIG_ARCH_OMAP1 #define OMAP_MCBSP_REG_DRR2 0x00 #define OMAP_MCBSP_REG_DRR1 0x02 -- cgit v1.2.3-18-g5258 From 92e753d7984db36f0a3c0bbf0f377da114768775 Mon Sep 17 00:00:00 2001 From: David Cohen Date: Wed, 16 Feb 2011 19:35:50 +0000 Subject: OMAP2+: IOMMU: don't print fault warning on specific layer IOMMU upper layer and user are responsible to handle a fault and to define whether it will end up as an error or not. OMAP2+ specific layer should not print anything in such case. Signed-off-by: David Cohen Acked-by: Hiroshi DOYU Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/iommu2.c | 16 ---------------- 1 file changed, 16 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c index 14ee686b649..49a1e5e841c 100644 --- a/arch/arm/mach-omap2/iommu2.c +++ b/arch/arm/mach-omap2/iommu2.c @@ -145,15 +145,7 @@ static void omap2_iommu_set_twl(struct iommu *obj, bool on) static u32 omap2_iommu_fault_isr(struct iommu *obj, u32 *ra) { - int i; u32 stat, da; - const char *err_msg[] = { - "tlb miss", - "translation fault", - "emulation miss", - "table walk fault", - "multi hit fault", - }; stat = iommu_read_reg(obj, MMU_IRQSTATUS); stat &= MMU_IRQ_MASK; @@ -163,14 +155,6 @@ static u32 omap2_iommu_fault_isr(struct iommu *obj, u32 *ra) da = iommu_read_reg(obj, MMU_FAULT_AD); *ra = da; - dev_err(obj->dev, "%s:\tda:%08x ", __func__, da); - - for (i = 0; i < ARRAY_SIZE(err_msg); i++) { - if (stat & (1 << i)) - printk("%s ", err_msg[i]); - } - printk("\n"); - iommu_write_reg(obj, stat, MMU_IRQSTATUS); return stat; -- cgit v1.2.3-18-g5258 From d594f1f31afe13edd8c02f3854a65cc58cfb3b74 Mon Sep 17 00:00:00 2001 From: David Cohen Date: Wed, 16 Feb 2011 19:35:51 +0000 Subject: omap: IOMMU: add support to callback during fault handling Add support to register an isr for IOMMU fault situations and adapt it to allow such (*isr)() to be used as fault callback. Drivers using IOMMU module might want to be informed when errors happen in order to debug it or react. Signed-off-by: David Cohen Acked-by: Hiroshi DOYU Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/iommu2.c | 17 +++++++++-- arch/arm/plat-omap/include/plat/iommu.h | 14 ++++++++- arch/arm/plat-omap/iommu.c | 52 +++++++++++++++++++++++---------- 3 files changed, 65 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c index 49a1e5e841c..adb083e41ac 100644 --- a/arch/arm/mach-omap2/iommu2.c +++ b/arch/arm/mach-omap2/iommu2.c @@ -146,18 +146,31 @@ static void omap2_iommu_set_twl(struct iommu *obj, bool on) static u32 omap2_iommu_fault_isr(struct iommu *obj, u32 *ra) { u32 stat, da; + u32 errs = 0; stat = iommu_read_reg(obj, MMU_IRQSTATUS); stat &= MMU_IRQ_MASK; - if (!stat) + if (!stat) { + *ra = 0; return 0; + } da = iommu_read_reg(obj, MMU_FAULT_AD); *ra = da; + if (stat & MMU_IRQ_TLBMISS) + errs |= OMAP_IOMMU_ERR_TLB_MISS; + if (stat & MMU_IRQ_TRANSLATIONFAULT) + errs |= OMAP_IOMMU_ERR_TRANS_FAULT; + if (stat & MMU_IRQ_EMUMISS) + errs |= OMAP_IOMMU_ERR_EMU_MISS; + if (stat & MMU_IRQ_TABLEWALKFAULT) + errs |= OMAP_IOMMU_ERR_TBLWALK_FAULT; + if (stat & MMU_IRQ_MULTIHITFAULT) + errs |= OMAP_IOMMU_ERR_MULTIHIT_FAULT; iommu_write_reg(obj, stat, MMU_IRQSTATUS); - return stat; + return errs; } static void omap2_tlb_read_cr(struct iommu *obj, struct cr_regs *cr) diff --git a/arch/arm/plat-omap/include/plat/iommu.h b/arch/arm/plat-omap/include/plat/iommu.h index 19cbb5e9ece..174f1b9c8c0 100644 --- a/arch/arm/plat-omap/include/plat/iommu.h +++ b/arch/arm/plat-omap/include/plat/iommu.h @@ -31,6 +31,7 @@ struct iommu { struct clk *clk; void __iomem *regbase; struct device *dev; + void *isr_priv; unsigned int refcount; struct mutex iommu_lock; /* global for this whole object */ @@ -47,7 +48,7 @@ struct iommu { struct list_head mmap; struct mutex mmap_lock; /* protect mmap */ - int (*isr)(struct iommu *obj); + int (*isr)(struct iommu *obj, u32 da, u32 iommu_errs, void *priv); void *ctx; /* iommu context: registres saved area */ u32 da_start; @@ -109,6 +110,13 @@ struct iommu_platform_data { u32 da_end; }; +/* IOMMU errors */ +#define OMAP_IOMMU_ERR_TLB_MISS (1 << 0) +#define OMAP_IOMMU_ERR_TRANS_FAULT (1 << 1) +#define OMAP_IOMMU_ERR_EMU_MISS (1 << 2) +#define OMAP_IOMMU_ERR_TBLWALK_FAULT (1 << 3) +#define OMAP_IOMMU_ERR_MULTIHIT_FAULT (1 << 4) + #if defined(CONFIG_ARCH_OMAP1) #error "iommu for this processor not implemented yet" #else @@ -161,6 +169,10 @@ extern size_t iopgtable_clear_entry(struct iommu *obj, u32 iova); extern int iommu_set_da_range(struct iommu *obj, u32 start, u32 end); extern struct iommu *iommu_get(const char *name); extern void iommu_put(struct iommu *obj); +extern int iommu_set_isr(const char *name, + int (*isr)(struct iommu *obj, u32 da, u32 iommu_errs, + void *priv), + void *isr_priv); extern void iommu_save_ctx(struct iommu *obj); extern void iommu_restore_ctx(struct iommu *obj); diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c index 4b3218eaf3e..e3eb0380090 100644 --- a/arch/arm/plat-omap/iommu.c +++ b/arch/arm/plat-omap/iommu.c @@ -783,25 +783,19 @@ static void iopgtable_clear_entry_all(struct iommu *obj) */ static irqreturn_t iommu_fault_handler(int irq, void *data) { - u32 stat, da; + u32 da, errs; u32 *iopgd, *iopte; - int err = -EIO; struct iommu *obj = data; if (!obj->refcount) return IRQ_NONE; - /* Dynamic loading TLB or PTE */ - if (obj->isr) - err = obj->isr(obj); - - if (!err) - return IRQ_HANDLED; - clk_enable(obj->clk); - stat = iommu_report_fault(obj, &da); + errs = iommu_report_fault(obj, &da); clk_disable(obj->clk); - if (!stat) + + /* Fault callback or TLB/PTE Dynamic loading */ + if (obj->isr && !obj->isr(obj, da, errs, obj->isr_priv)) return IRQ_HANDLED; iommu_disable(obj); @@ -809,15 +803,16 @@ static irqreturn_t iommu_fault_handler(int irq, void *data) iopgd = iopgd_offset(obj, da); if (!iopgd_is_table(*iopgd)) { - dev_err(obj->dev, "%s: da:%08x pgd:%p *pgd:%08x\n", obj->name, - da, iopgd, *iopgd); + dev_err(obj->dev, "%s: errs:0x%08x da:0x%08x pgd:0x%p " + "*pgd:px%08x\n", obj->name, errs, da, iopgd, *iopgd); return IRQ_NONE; } iopte = iopte_offset(iopgd, da); - dev_err(obj->dev, "%s: da:%08x pgd:%p *pgd:%08x pte:%p *pte:%08x\n", - obj->name, da, iopgd, *iopgd, iopte, *iopte); + dev_err(obj->dev, "%s: errs:0x%08x da:0x%08x pgd:0x%p *pgd:0x%08x " + "pte:0x%p *pte:0x%08x\n", obj->name, errs, da, iopgd, *iopgd, + iopte, *iopte); return IRQ_NONE; } @@ -920,6 +915,33 @@ void iommu_put(struct iommu *obj) } EXPORT_SYMBOL_GPL(iommu_put); +int iommu_set_isr(const char *name, + int (*isr)(struct iommu *obj, u32 da, u32 iommu_errs, + void *priv), + void *isr_priv) +{ + struct device *dev; + struct iommu *obj; + + dev = driver_find_device(&omap_iommu_driver.driver, NULL, (void *)name, + device_match_by_alias); + if (!dev) + return -ENODEV; + + obj = to_iommu(dev); + mutex_lock(&obj->iommu_lock); + if (obj->refcount != 0) { + mutex_unlock(&obj->iommu_lock); + return -EBUSY; + } + obj->isr = isr; + obj->isr_priv = isr_priv; + mutex_unlock(&obj->iommu_lock); + + return 0; +} +EXPORT_SYMBOL_GPL(iommu_set_isr); + /* * OMAP Device MMU(IOMMU) detection */ -- cgit v1.2.3-18-g5258 From a39676857459e8d4a0de2eac27206a3a01c1d6b8 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Thu, 24 Feb 2011 15:22:05 -0800 Subject: [IA64] disable interrupts at end of ia64_mca_cpe_int_handler() SAL requires that interrupts be enabled when making some calls to it to pick up error records, so we enable interrupts inside this handler. We should disable them again at the end. Found by a new WARN_ONCE that tglx added to handle_irq_event_percpu() Signed-off-by: Tony Luck --- arch/ia64/kernel/mca.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index 1753f6a30d5..e50d54e97f0 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -582,6 +582,8 @@ out: /* Get the CPE error record and log it */ ia64_mca_log_sal_error_record(SAL_INFO_TYPE_CPE); + local_irq_disable(); + return IRQ_HANDLED; } -- cgit v1.2.3-18-g5258 From 1f565a896ee139a70e1a16f74a4ec29707691b0b Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Fri, 25 Feb 2011 10:06:39 +0100 Subject: x86-64, NUMA: Fix size of numa_distance array numa_distance should be sized like the SLIT, an NxN matrix where N is the highest node id + 1. This patch fixes the calculation to avoid overflowing the array on the subsequent iteration. -tj: The original patch used last index to calculate size. Yinghai pointed out it should be incremented so it is the number of elements instead of the last index to calculate the size of the table. Updated accordingly. Signed-off-by: David Rientjes Cc: Yinghai Lu Signed-off-by: Tejun Heo --- arch/x86/mm/numa_64.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index cccc01d8415..7757d2214fa 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -414,7 +414,8 @@ static int __init numa_alloc_distance(void) for_each_node_mask(i, nodes_parsed) cnt = i; - size = ++cnt * sizeof(numa_distance[0]); + cnt++; + size = cnt * cnt * sizeof(numa_distance[0]); phys = memblock_find_in_range(0, (u64)max_pfn_mapped << PAGE_SHIFT, size, PAGE_SIZE); -- cgit v1.2.3-18-g5258 From d356b595e5a95c0c2305ec0a7d1cdb3e26f57716 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Fri, 25 Feb 2011 08:46:38 -0500 Subject: arch/tile: Fix atomic_read() definition to use ACCESS_ONCE This adds the volatile cast which forces the compiler to emit the load. Suggested by Peter Zijlstra . Signed-off-by: Chris Metcalf --- arch/tile/include/asm/atomic.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/tile/include/asm/atomic.h b/arch/tile/include/asm/atomic.h index b8c49f98a44..75a16028a95 100644 --- a/arch/tile/include/asm/atomic.h +++ b/arch/tile/include/asm/atomic.h @@ -32,7 +32,7 @@ */ static inline int atomic_read(const atomic_t *v) { - return v->counter; + return ACCESS_ONCE(v->counter); } /** -- cgit v1.2.3-18-g5258 From a906fdaacca49917d83e5032dfc31f694249ad10 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 25 Feb 2011 16:09:31 +0100 Subject: x86: dt: Cleanup local apic setup Up to now we force enable the local apic in the devicetree setup uncoditionally and set smp_found_config unconditionally to 1 when a devicetree blob is available. This breaks, when local apic is disabled in the Kconfig. Make it consistent by initializing device tree explicitely before smp_get_config() so a non lapic configuration could be used as well. To be functional that would require to implement PIT as an interrupt host, but the only user of this code until now is ce4100 which requires apics to be available. So we leave this up to those who need it. Tested-by: Sebastian Siewior Signed-off-by: Thomas Gleixner --- arch/x86/include/asm/apic.h | 2 +- arch/x86/include/asm/prom.h | 6 ++---- arch/x86/kernel/apic/apic.c | 6 +++--- arch/x86/kernel/devicetree.c | 40 +++++++++++++++++++-------------------- arch/x86/kernel/setup.c | 2 +- arch/x86/platform/ce4100/ce4100.c | 4 ++-- 6 files changed, 29 insertions(+), 31 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h index 3c896946f4c..4afe512120a 100644 --- a/arch/x86/include/asm/apic.h +++ b/arch/x86/include/asm/apic.h @@ -240,7 +240,7 @@ extern void setup_boot_APIC_clock(void); extern void setup_secondary_APIC_clock(void); extern int APIC_init_uniprocessor(void); extern void enable_NMI_through_LVT0(void); -extern int apic_force_enable(void); +extern int apic_force_enable(unsigned long addr); /* * On 32bit this is mach-xxx local diff --git a/arch/x86/include/asm/prom.h b/arch/x86/include/asm/prom.h index f58361ba735..971e0b46446 100644 --- a/arch/x86/include/asm/prom.h +++ b/arch/x86/include/asm/prom.h @@ -28,9 +28,8 @@ extern int of_ioapic; extern u64 initial_dtb; extern void add_dtb(u64 data); extern void x86_add_irq_domains(void); -void x86_dtb_find_config(void); -void x86_dtb_get_config(unsigned int unused); void __cpuinit x86_of_pci_init(void); +void x86_dtb_init(void); static inline struct device_node *pci_device_to_OF_node(struct pci_dev *pdev) { @@ -46,8 +45,7 @@ static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus) static inline void add_dtb(u64 data) { } static inline void x86_add_irq_domains(void) { } static inline void x86_of_pci_init(void) { } -#define x86_dtb_find_config x86_init_noop -#define x86_dtb_get_config x86_init_uint_noop +static inline void x86_dtb_init(void) { } #define of_ioapic 0 #endif diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index f0e079823c4..4f43312cfbf 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1563,7 +1563,7 @@ static int apic_verify(void) return 0; } -int apic_force_enable(void) +int apic_force_enable(unsigned long addr) { u32 h, l; @@ -1579,7 +1579,7 @@ int apic_force_enable(void) if (!(l & MSR_IA32_APICBASE_ENABLE)) { pr_info("Local APIC disabled by BIOS -- reenabling.\n"); l &= ~MSR_IA32_APICBASE_BASE; - l |= MSR_IA32_APICBASE_ENABLE | APIC_DEFAULT_PHYS_BASE; + l |= MSR_IA32_APICBASE_ENABLE | addr; wrmsr(MSR_IA32_APICBASE, l, h); enabled_via_apicbase = 1; } @@ -1620,7 +1620,7 @@ static int __init detect_init_APIC(void) "you can enable it with \"lapic\"\n"); return -1; } - if (apic_force_enable()) + if (apic_force_enable(APIC_DEFAULT_PHYS_BASE)) return -1; } else { if (apic_verify()) diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c index 06e5e91939c..7a8cebc9ff2 100644 --- a/arch/x86/kernel/devicetree.c +++ b/arch/x86/kernel/devicetree.c @@ -26,6 +26,7 @@ static DEFINE_RAW_SPINLOCK(big_irq_lock); int __initdata of_ioapic; +#ifdef CONFIG_X86_IO_APIC static void add_interrupt_host(struct irq_domain *ih) { unsigned long flags; @@ -34,6 +35,7 @@ static void add_interrupt_host(struct irq_domain *ih) list_add(&ih->l, &irq_domains); raw_spin_unlock_irqrestore(&big_irq_lock, flags); } +#endif static struct irq_domain *get_ih_from_node(struct device_node *controller) { @@ -223,18 +225,28 @@ static void __init dtb_setup_hpet(void) static void __init dtb_lapic_setup(void) { #ifdef CONFIG_X86_LOCAL_APIC - if (apic_force_enable()) + struct device_node *dn; + struct resource r; + int ret; + + dn = of_find_compatible_node(NULL, NULL, "intel,ce4100-lapic"); + if (!dn) + return; + + ret = of_address_to_resource(dn, 0, &r); + if (WARN_ON(ret)) return; + /* Did the boot loader setup the local APIC ? */ + if (!cpu_has_apic) { + if (apic_force_enable(r.start)) + return; + } smp_found_config = 1; pic_mode = 1; - /* Required for ioapic registration */ - set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr); - if (boot_cpu_physical_apicid == -1U) - boot_cpu_physical_apicid = read_apic_id(); - + register_lapic_address(r.start); generic_processor_info(boot_cpu_physical_apicid, - GET_APIC_VERSION(apic_read(APIC_LVR))); + GET_APIC_VERSION(apic_read(APIC_LVR))); #endif } @@ -259,9 +271,6 @@ static void __init dtb_ioapic_setup(void) { struct device_node *dn; - if (!smp_found_config) - return; - for_each_compatible_node(dn, NULL, "intel,ce4100-ioapic") dtb_add_ioapic(dn); @@ -270,7 +279,6 @@ static void __init dtb_ioapic_setup(void) return; } printk(KERN_ERR "Error: No information about IO-APIC in OF.\n"); - smp_found_config = 0; } #else static void __init dtb_ioapic_setup(void) {} @@ -282,14 +290,6 @@ static void __init dtb_apic_setup(void) dtb_ioapic_setup(); } -void __init x86_dtb_find_config(void) -{ - if (initial_dtb) - smp_found_config = 1; - else - printk(KERN_ERR "Missing device tree!.\n"); -} - #ifdef CONFIG_OF_FLATTREE static void __init x86_flattree_get_config(void) { @@ -325,7 +325,7 @@ static void __init x86_flattree_get_config(void) static inline void x86_flattree_get_config(void) { } #endif -void __init x86_dtb_get_config(unsigned int unused) +void __init x86_dtb_init(void) { x86_flattree_get_config(); diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 33dcbce1ab0..b3143bc74e6 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -1044,8 +1044,8 @@ void __init setup_arch(char **cmdline_p) * Read APIC and some other early information from ACPI tables. */ acpi_boot_init(); - sfi_init(); + x86_dtb_init(); /* * get boot-time SMP configuration: diff --git a/arch/x86/platform/ce4100/ce4100.c b/arch/x86/platform/ce4100/ce4100.c index b3436d344b4..68c0dbcc95b 100644 --- a/arch/x86/platform/ce4100/ce4100.c +++ b/arch/x86/platform/ce4100/ce4100.c @@ -134,8 +134,8 @@ void __init x86_ce4100_early_setup(void) x86_init.oem.arch_setup = sdv_arch_setup; x86_platform.i8042_detect = ce4100_i8042_detect; x86_init.resources.probe_roms = x86_init_noop; - x86_init.mpparse.get_smp_config = x86_dtb_get_config; - x86_init.mpparse.find_smp_config = x86_dtb_find_config; + x86_init.mpparse.get_smp_config = x86_init_uint_noop; + x86_init.mpparse.find_smp_config = x86_init_noop; #ifdef CONFIG_X86_IO_APIC x86_init.pci.init_irq = sdv_pci_init; -- cgit v1.2.3-18-g5258 From cff520b9c2ee1486ea9ff1dbc774510c62e5ecb9 Mon Sep 17 00:00:00 2001 From: Stefano Stabellini Date: Thu, 2 Dec 2010 17:54:54 +0000 Subject: xen: do not use xen_info on HVM, set pv_info name to "Xen HVM" Signed-off-by: Stefano Stabellini Acked-by: Jeremy Fitzhardinge --- arch/x86/xen/enlighten.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 50542efe45f..2f67e2ea222 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1284,8 +1284,7 @@ static int init_hvm_pv_info(int *major, int *minor) xen_setup_features(); - pv_info = xen_info; - pv_info.kernel_rpl = 0; + pv_info.name = "Xen HVM"; xen_domain_type = XEN_HVM_DOMAIN; -- cgit v1.2.3-18-g5258 From 99bbb3a84a99cd04ab16b998b20f01a72cfa9f4f Mon Sep 17 00:00:00 2001 From: Stefano Stabellini Date: Thu, 2 Dec 2010 17:55:10 +0000 Subject: xen: PV on HVM: support PV spinlocks and IPIs Initialize PV spinlocks on boot CPU right after native_smp_prepare_cpus (that switch to APIC mode and initialize APIC routing); on secondary CPUs on CPU_UP_PREPARE. Enable the usage of event channels to send and receive IPIs when running as a PV on HVM guest. Signed-off-by: Stefano Stabellini --- arch/x86/xen/enlighten.c | 3 +++ arch/x86/xen/smp.c | 38 ++++++++++++++++++++++++++++++++++++++ arch/x86/xen/xen-ops.h | 2 ++ 3 files changed, 43 insertions(+) (limited to 'arch') diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 2f67e2ea222..fe02574789c 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1330,6 +1330,8 @@ static int __cpuinit xen_hvm_cpu_notify(struct notifier_block *self, switch (action) { case CPU_UP_PREPARE: per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu]; + if (xen_have_vector_callback) + xen_init_lock_cpu(cpu); break; default: break; @@ -1354,6 +1356,7 @@ static void __init xen_hvm_guest_init(void) if (xen_feature(XENFEAT_hvm_callback_vector)) xen_have_vector_callback = 1; + xen_hvm_smp_init(); register_cpu_notifier(&xen_hvm_cpu_notifier); xen_unplug_emulated_devices(); have_vcpu_info_placement = 0; diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index 72a4c795904..30612441ed9 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -509,3 +509,41 @@ void __init xen_smp_init(void) xen_fill_possible_map(); xen_init_spinlocks(); } + +static void __init xen_hvm_smp_prepare_cpus(unsigned int max_cpus) +{ + native_smp_prepare_cpus(max_cpus); + WARN_ON(xen_smp_intr_init(0)); + + if (!xen_have_vector_callback) + return; + xen_init_lock_cpu(0); + xen_init_spinlocks(); +} + +static int __cpuinit xen_hvm_cpu_up(unsigned int cpu) +{ + int rc; + rc = native_cpu_up(cpu); + WARN_ON (xen_smp_intr_init(cpu)); + return rc; +} + +static void xen_hvm_cpu_die(unsigned int cpu) +{ + unbind_from_irqhandler(per_cpu(xen_resched_irq, cpu), NULL); + unbind_from_irqhandler(per_cpu(xen_callfunc_irq, cpu), NULL); + unbind_from_irqhandler(per_cpu(xen_debug_irq, cpu), NULL); + unbind_from_irqhandler(per_cpu(xen_callfuncsingle_irq, cpu), NULL); + native_cpu_die(cpu); +} + +void __init xen_hvm_smp_init(void) +{ + smp_ops.smp_prepare_cpus = xen_hvm_smp_prepare_cpus; + smp_ops.smp_send_reschedule = xen_smp_send_reschedule; + smp_ops.cpu_up = xen_hvm_cpu_up; + smp_ops.cpu_die = xen_hvm_cpu_die; + smp_ops.send_call_func_ipi = xen_smp_send_call_function_ipi; + smp_ops.send_call_func_single_ipi = xen_smp_send_call_function_single_ipi; +} diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index 9d41bf98575..3112f55638c 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -64,10 +64,12 @@ void xen_setup_vcpu_info_placement(void); #ifdef CONFIG_SMP void xen_smp_init(void); +void __init xen_hvm_smp_init(void); extern cpumask_var_t xen_cpu_initialized_map; #else static inline void xen_smp_init(void) {} +static inline void xen_hvm_smp_init(void) {} #endif #ifdef CONFIG_PARAVIRT_SPINLOCKS -- cgit v1.2.3-18-g5258 From e057a4b6e0eb6701f6ec923be2075d4984cef51a Mon Sep 17 00:00:00 2001 From: Stefano Stabellini Date: Fri, 11 Feb 2011 17:55:13 +0000 Subject: xen: fix compile issue if XEN is enabled but XEN_PVHVM is disabled Signed-off-by: Stefano Stabellini --- arch/x86/xen/suspend.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c index 9bbd63a129b..4a3d3dd3dd3 100644 --- a/arch/x86/xen/suspend.c +++ b/arch/x86/xen/suspend.c @@ -28,6 +28,7 @@ void xen_pre_suspend(void) void xen_hvm_post_suspend(int suspend_cancelled) { +#ifdef CONFIG_XEN_PVHVM int cpu; xen_hvm_init_shared_info(); xen_callback_vector(); @@ -37,6 +38,7 @@ void xen_hvm_post_suspend(int suspend_cancelled) xen_setup_runstate_info(cpu); } } +#endif } void xen_post_suspend(int suspend_cancelled) -- cgit v1.2.3-18-g5258 From 8e15597fa430c03415e2268dfbae0f262b948788 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Thu, 17 Feb 2011 11:04:20 +0000 Subject: xen: use new schedop interface for suspend Take the opportunity to comment on the semantics of the PV guest suspend hypercall arguments. Signed-off-by: Ian Campbell Reviewed-by: Konrad Rzeszutek Wilk --- arch/x86/include/asm/xen/hypercall.h | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/xen/hypercall.h b/arch/x86/include/asm/xen/hypercall.h index a3c28ae4025..a7d5823862b 100644 --- a/arch/x86/include/asm/xen/hypercall.h +++ b/arch/x86/include/asm/xen/hypercall.h @@ -422,10 +422,17 @@ HYPERVISOR_set_segment_base(int reg, unsigned long value) #endif static inline int -HYPERVISOR_suspend(unsigned long srec) +HYPERVISOR_suspend(unsigned long start_info_mfn) { - return _hypercall3(int, sched_op, SCHEDOP_shutdown, - SHUTDOWN_suspend, srec); + struct sched_shutdown r = { .reason = SHUTDOWN_suspend }; + + /* + * For a PV guest the tools require that the start_info mfn be + * present in rdx/edx when the hypercall is made. Per the + * hypercall calling convention this is the third hypercall + * argument, which is start_info_mfn here. + */ + return _hypercall3(int, sched_op_new, SCHEDOP_shutdown, &r, start_info_mfn); } static inline int -- cgit v1.2.3-18-g5258 From a8b7458363b9174f3c2196ca6085630b4b30b7a1 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Thu, 17 Feb 2011 11:04:20 +0000 Subject: xen: switch to new schedop hypercall by default. Rename old interface to sched_op_compat and rename sched_op_new to simply sched_op. Signed-off-by: Ian Campbell Reviewed-by: Konrad Rzeszutek Wilk --- arch/x86/include/asm/xen/hypercall.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/xen/hypercall.h b/arch/x86/include/asm/xen/hypercall.h index a7d5823862b..8508bfe5229 100644 --- a/arch/x86/include/asm/xen/hypercall.h +++ b/arch/x86/include/asm/xen/hypercall.h @@ -287,7 +287,7 @@ HYPERVISOR_fpu_taskswitch(int set) static inline int HYPERVISOR_sched_op(int cmd, void *arg) { - return _hypercall2(int, sched_op_new, cmd, arg); + return _hypercall2(int, sched_op, cmd, arg); } static inline long @@ -432,7 +432,7 @@ HYPERVISOR_suspend(unsigned long start_info_mfn) * hypercall calling convention this is the third hypercall * argument, which is start_info_mfn here. */ - return _hypercall3(int, sched_op_new, SCHEDOP_shutdown, &r, start_info_mfn); + return _hypercall3(int, sched_op, SCHEDOP_shutdown, &r, start_info_mfn); } static inline int -- cgit v1.2.3-18-g5258 From 03c8142bd2fb3b87effa6ecb2f8957be588bc85f Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Thu, 17 Feb 2011 11:04:20 +0000 Subject: xen: suspend: add "arch" to pre/post suspend hooks xen_pre_device_suspend is unused on ia64. Signed-off-by: Ian Campbell Reviewed-by: Konrad Rzeszutek Wilk --- arch/ia64/xen/suspend.c | 9 ++------- arch/x86/xen/suspend.c | 6 +++--- 2 files changed, 5 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/ia64/xen/suspend.c b/arch/ia64/xen/suspend.c index fd66b048c6f..419c8620945 100644 --- a/arch/ia64/xen/suspend.c +++ b/arch/ia64/xen/suspend.c @@ -37,19 +37,14 @@ xen_mm_unpin_all(void) /* nothing */ } -void xen_pre_device_suspend(void) -{ - /* nothing */ -} - void -xen_pre_suspend() +xen_arch_pre_suspend() { /* nothing */ } void -xen_post_suspend(int suspend_cancelled) +xen_arch_post_suspend(int suspend_cancelled) { if (suspend_cancelled) return; diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c index 4a3d3dd3dd3..45329c8c226 100644 --- a/arch/x86/xen/suspend.c +++ b/arch/x86/xen/suspend.c @@ -12,7 +12,7 @@ #include "xen-ops.h" #include "mmu.h" -void xen_pre_suspend(void) +void xen_arch_pre_suspend(void) { xen_start_info->store_mfn = mfn_to_pfn(xen_start_info->store_mfn); xen_start_info->console.domU.mfn = @@ -26,7 +26,7 @@ void xen_pre_suspend(void) BUG(); } -void xen_hvm_post_suspend(int suspend_cancelled) +void xen_arch_hvm_post_suspend(int suspend_cancelled) { #ifdef CONFIG_XEN_PVHVM int cpu; @@ -41,7 +41,7 @@ void xen_hvm_post_suspend(int suspend_cancelled) #endif } -void xen_post_suspend(int suspend_cancelled) +void xen_arch_post_suspend(int suspend_cancelled) { xen_build_mfn_list_list(); -- cgit v1.2.3-18-g5258 From bd061715392ccd72a398577615e856175d2b7b2b Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 25 Feb 2011 10:11:15 -0800 Subject: omap: Fix compile if MTD_NAND_OMAP2 is not selected Fix compile if MTD_NAND_OMAP2 is not selected Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-flash.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index c32c06828f0..729892fdcf2 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -154,7 +154,7 @@ __init board_nand_init(struct mtd_partition *nand_parts, } #else void -__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs) +__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs, int nand_type) { } #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */ -- cgit v1.2.3-18-g5258 From 589541c0bfb1426ad39c7b59c0372346bcf84229 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Mon, 21 Feb 2011 08:42:36 +0200 Subject: omap: rx51: Add SI4713 FM transmitter Add SI4713 FM transmitter supplies, platform data and setup to RX-51/N900. It is connected to line output signals of TLV320AIC34 codec A part. Driver can be either built-in or a module. It can be tuned with v4l2-ctl from ivtv-utils. Following examples illustrate the use of it: v4l2-ctl -d /dev/radio0 --set-ctrl=mute=0 (power up) v4l2-ctl -d /dev/radio0 -f 107900 (tune 107.9 MHz) v4l2-ctl -d /dev/radio0 --set-ctrl=mute=1 (power down) Signed-off-by: Jarkko Nikula Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-rx51-peripherals.c | 44 ++++++++++++++++++++++++++++ 1 file changed, 44 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index e75e240cad6..d0998f81269 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -36,6 +36,8 @@ #include #include +#include +#include #include <../drivers/staging/iio/light/tsl2563.h> @@ -47,6 +49,8 @@ #define RX51_WL1251_POWER_GPIO 87 #define RX51_WL1251_IRQ_GPIO 42 +#define RX51_FMTX_RESET_GPIO 163 +#define RX51_FMTX_IRQ 53 /* list all spi devices here */ enum { @@ -357,10 +361,14 @@ static struct regulator_consumer_supply rx51_vio_supplies[] = { REGULATOR_SUPPLY("DVDD", "2-0018"), REGULATOR_SUPPLY("IOVDD", "2-0019"), REGULATOR_SUPPLY("DVDD", "2-0019"), + /* Si4713 IO supply */ + REGULATOR_SUPPLY("vio", "2-0063"), }; static struct regulator_consumer_supply rx51_vaux1_consumers[] = { REGULATOR_SUPPLY("vdds_sdi", "omapdss"), + /* Si4713 supply */ + REGULATOR_SUPPLY("vdd", "2-0063"), }; static struct regulator_consumer_supply rx51_vdac_supply[] = { @@ -511,6 +519,41 @@ static struct regulator_init_data rx51_vio = { .consumer_supplies = rx51_vio_supplies, }; +static struct si4713_platform_data rx51_si4713_i2c_data __initdata_or_module = { + .gpio_reset = RX51_FMTX_RESET_GPIO, +}; + +static struct i2c_board_info rx51_si4713_board_info __initdata_or_module = { + I2C_BOARD_INFO("si4713", SI4713_I2C_ADDR_BUSEN_HIGH), + .platform_data = &rx51_si4713_i2c_data, +}; + +static struct radio_si4713_platform_data rx51_si4713_data __initdata_or_module = { + .i2c_bus = 2, + .subdev_board_info = &rx51_si4713_board_info, +}; + +static struct platform_device rx51_si4713_dev __initdata_or_module = { + .name = "radio-si4713", + .id = -1, + .dev = { + .platform_data = &rx51_si4713_data, + }, +}; + +static __init void rx51_init_si4713(void) +{ + int err; + + err = gpio_request_one(RX51_FMTX_IRQ, GPIOF_DIR_IN, "si4713 irq"); + if (err) { + printk(KERN_ERR "Cannot request si4713 irq gpio. %d\n", err); + return; + } + rx51_si4713_board_info.irq = gpio_to_irq(RX51_FMTX_IRQ); + platform_device_register(&rx51_si4713_dev); +} + static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n) { /* FIXME this gpio setup is just a placeholder for now */ @@ -921,6 +964,7 @@ void __init rx51_peripherals_init(void) board_smc91x_init(); rx51_add_gpio_keys(); rx51_init_wl1251(); + rx51_init_si4713(); spi_register_board_info(rx51_peripherals_spi_board_info, ARRAY_SIZE(rx51_peripherals_spi_board_info)); -- cgit v1.2.3-18-g5258 From e0530460f6bc268b446040f1973d427d21f042d9 Mon Sep 17 00:00:00 2001 From: "Radek Pilař (Mrkva)" Date: Thu, 24 Feb 2011 19:02:49 +0100 Subject: OMAP3 Touchbook: fix board initialization init_early hook runs too early for omap3_mux_init(), so the board won't boot. Moved to init_machine, then it works just fine. Signed-off-by: Radek Pilar Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-omap3touchbook.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 6a60f79dccc..a35afe2227d 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -417,7 +417,6 @@ static struct omap_board_mux board_mux[] __initdata = { static void __init omap3_touchbook_init_early(void) { - omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_board_config = omap3_touchbook_config; omap_board_config_size = ARRAY_SIZE(omap3_touchbook_config); omap2_init_common_infrastructure(); @@ -514,6 +513,7 @@ static struct omap_musb_board_data musb_board_data = { static void __init omap3_touchbook_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); pm_power_off = omap3_touchbook_poweroff; omap3_touchbook_i2c_init(); -- cgit v1.2.3-18-g5258 From e41cccfe794d188b0ae7f17f01692bcbc0e0dc87 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 24 Feb 2011 14:36:03 -0800 Subject: omap2+: Minimize board specific init_early calls We should only call init_common_infrastructure and init_common_devices from init_early. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-2430sdp.c | 5 +++-- arch/arm/mach-omap2/board-3430sdp.c | 6 +++--- arch/arm/mach-omap2/board-3630sdp.c | 4 ++-- arch/arm/mach-omap2/board-4430sdp.c | 5 +++-- arch/arm/mach-omap2/board-am3517crane.c | 6 +++--- arch/arm/mach-omap2/board-am3517evm.c | 10 +++++----- arch/arm/mach-omap2/board-apollon.c | 4 ++-- arch/arm/mach-omap2/board-cm-t35.c | 11 +++++------ arch/arm/mach-omap2/board-cm-t3517.c | 5 ++--- arch/arm/mach-omap2/board-generic.c | 4 ++-- arch/arm/mach-omap2/board-h4.c | 5 +++-- arch/arm/mach-omap2/board-ldp.c | 4 ++-- arch/arm/mach-omap2/board-omap3evm.c | 5 +++-- arch/arm/mach-omap2/board-omap3stalker.c | 4 ++-- arch/arm/mach-omap2/board-omap3touchbook.c | 5 +++-- arch/arm/mach-omap2/board-overo.c | 4 ++-- arch/arm/mach-omap2/board-rx51.c | 6 +++--- arch/arm/mach-omap2/board-ti8168evm.c | 4 ++-- 18 files changed, 50 insertions(+), 47 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index cc42d474c44..59de1dc5d6b 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -142,8 +142,6 @@ static struct omap_board_config_kernel sdp2430_config[] __initdata = { static void __init omap_2430sdp_init_early(void) { - omap_board_config = sdp2430_config; - omap_board_config_size = ARRAY_SIZE(sdp2430_config); omap2_init_common_infrastructure(); omap2_init_common_devices(NULL, NULL); } @@ -246,6 +244,9 @@ static void __init omap_2430sdp_init(void) omap2430_mux_init(board_mux, OMAP_PACKAGE_ZAC); + omap_board_config = sdp2430_config; + omap_board_config_size = ARRAY_SIZE(sdp2430_config); + omap2430_i2c_init(); platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices)); diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 8950ecc9b94..b12b62064e7 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -315,9 +315,6 @@ static struct omap_board_config_kernel sdp3430_config[] __initdata = { static void __init omap_3430sdp_init_early(void) { - omap_board_config = sdp3430_config; - omap_board_config_size = ARRAY_SIZE(sdp3430_config); - omap3_pm_init_cpuidle(omap3_cpuidle_params_table); omap2_init_common_infrastructure(); omap2_init_common_devices(hyb18m512160af6_sdrc_params, NULL); } @@ -788,6 +785,9 @@ static struct omap_musb_board_data musb_board_data = { static void __init omap_3430sdp_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); + omap_board_config = sdp3430_config; + omap_board_config_size = ARRAY_SIZE(sdp3430_config); + omap3_pm_init_cpuidle(omap3_cpuidle_params_table); omap3430_i2c_init(); omap_display_init(&sdp3430_dss_data); if (omap_rev() > OMAP3430_REV_ES1_0) diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index 8d1c4358ecf..c4e22b32e47 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -72,8 +72,6 @@ static struct omap_board_config_kernel sdp_config[] __initdata = { static void __init omap_sdp_init_early(void) { - omap_board_config = sdp_config; - omap_board_config_size = ARRAY_SIZE(sdp_config); omap2_init_common_infrastructure(); omap2_init_common_devices(h8mbx00u0mer0em_sdrc_params, h8mbx00u0mer0em_sdrc_params); @@ -206,6 +204,8 @@ static struct flash_partitions sdp_flash_partitions[] = { static void __init omap_sdp_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); + omap_board_config = sdp_config; + omap_board_config_size = ARRAY_SIZE(sdp_config); zoom_peripherals_init(); zoom_display_init(); board_smc91x_init(); diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 1a943be822c..81ef97961ed 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -325,8 +325,6 @@ static struct omap_board_config_kernel sdp4430_config[] __initdata = { static void __init omap_4430sdp_init_early(void) { - omap_board_config = sdp4430_config; - omap_board_config_size = ARRAY_SIZE(sdp4430_config); omap2_init_common_infrastructure(); omap2_init_common_devices(NULL, NULL); #ifdef CONFIG_OMAP_32K_TIMER @@ -640,6 +638,9 @@ static void __init omap_4430sdp_init(void) package = OMAP_PACKAGE_CBL; omap4_mux_init(board_mux, package); + omap_board_config = sdp4430_config; + omap_board_config_size = ARRAY_SIZE(sdp4430_config); + omap4_i2c_init(); omap_sfh7741prox_init(); platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices)); diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index ae3a83d47da..f53bbb2c347 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -51,9 +51,6 @@ static struct omap_board_mux board_mux[] __initdata = { static void __init am3517_crane_init_early(void) { - omap_board_config = am3517_crane_config; - omap_board_config_size = ARRAY_SIZE(am3517_crane_config); - omap2_init_common_infrastructure(); omap2_init_common_devices(NULL, NULL); } @@ -76,6 +73,9 @@ static void __init am3517_crane_init(void) omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_serial_init(); + omap_board_config = am3517_crane_config; + omap_board_config_size = ARRAY_SIZE(am3517_crane_config); + /* Configure GPIO for EHCI port */ if (omap_mux_init_gpio(GPIO_USB_NRESET, OMAP_PIN_OUTPUT)) { pr_err("Can not configure mux for GPIO_USB_NRESET %d\n", diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 634fe65b33c..30ec4519326 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -381,13 +381,8 @@ static struct omap_dss_board_info am3517_evm_dss_data = { /* * Board initialization */ -static struct omap_board_config_kernel am3517_evm_config[] __initdata = { -}; - static void __init am3517_evm_init_early(void) { - omap_board_config = am3517_evm_config; - omap_board_config_size = ARRAY_SIZE(am3517_evm_config); omap2_init_common_infrastructure(); omap2_init_common_devices(NULL, NULL); } @@ -481,8 +476,13 @@ static void am3517_evm_hecc_init(struct ti_hecc_platform_data *pdata) platform_device_register(&am3517_hecc_device); } +static struct omap_board_config_kernel am3517_evm_config[] __initdata = { +}; + static void __init am3517_evm_init(void) { + omap_board_config = am3517_evm_config; + omap_board_config_size = ARRAY_SIZE(am3517_evm_config); omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); am3517_evm_i2c_init(); diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 4ef4aad4e71..f4f8374a029 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -276,8 +276,6 @@ static struct omap_board_config_kernel apollon_config[] __initdata = { static void __init omap_apollon_init_early(void) { - omap_board_config = apollon_config; - omap_board_config_size = ARRAY_SIZE(apollon_config); omap2_init_common_infrastructure(); omap2_init_common_devices(NULL, NULL); } @@ -319,6 +317,8 @@ static void __init omap_apollon_init(void) u32 v; omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC); + omap_board_config = apollon_config; + omap_board_config_size = ARRAY_SIZE(apollon_config); apollon_init_smc91x(); apollon_led_init(); diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 7311824be99..27bea540ccb 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -668,14 +668,8 @@ static void __init cm_t35_init_i2c(void) ARRAY_SIZE(cm_t35_i2c_boardinfo)); } -static struct omap_board_config_kernel cm_t35_config[] __initdata = { -}; - static void __init cm_t35_init_early(void) { - omap_board_config = cm_t35_config; - omap_board_config_size = ARRAY_SIZE(cm_t35_config); - omap2_init_common_infrastructure(); omap2_init_common_devices(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); @@ -785,8 +779,13 @@ static struct omap_musb_board_data musb_board_data = { .power = 100, }; +static struct omap_board_config_kernel cm_t35_config[] __initdata = { +}; + static void __init cm_t35_init(void) { + omap_board_config = cm_t35_config; + omap_board_config_size = ARRAY_SIZE(cm_t35_config); omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); omap_serial_init(); cm_t35_init_i2c(); diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index 38bef6d004c..9da6e8240e8 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -256,9 +256,6 @@ static struct omap_board_config_kernel cm_t3517_config[] __initdata = { static void __init cm_t3517_init_early(void) { - omap_board_config = cm_t3517_config; - omap_board_config_size = ARRAY_SIZE(cm_t3517_config); - omap2_init_common_infrastructure(); omap2_init_common_devices(NULL, NULL); } @@ -293,6 +290,8 @@ static void __init cm_t3517_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_serial_init(); + omap_board_config = cm_t3517_config; + omap_board_config_size = ARRAY_SIZE(cm_t3517_config); cm_t3517_init_leds(); cm_t3517_init_nand(); cm_t3517_init_rtc(); diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 682da9251db..73e3c31e850 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -35,8 +35,6 @@ static struct omap_board_config_kernel generic_config[] = { static void __init omap_generic_init_early(void) { - omap_board_config = generic_config; - omap_board_config_size = ARRAY_SIZE(generic_config); omap2_init_common_infrastructure(); omap2_init_common_devices(NULL, NULL); } @@ -44,6 +42,8 @@ static void __init omap_generic_init_early(void) static void __init omap_generic_init(void) { omap_serial_init(); + omap_board_config = generic_config; + omap_board_config_size = ARRAY_SIZE(generic_config); } static void __init omap_generic_map_io(void) diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index f6a3872f72f..7e6bf4fa153 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -292,8 +292,6 @@ static struct omap_board_config_kernel h4_config[] __initdata = { static void __init omap_h4_init_early(void) { - omap_board_config = h4_config; - omap_board_config_size = ARRAY_SIZE(h4_config); omap2_init_common_infrastructure(); omap2_init_common_devices(NULL, NULL); } @@ -334,6 +332,9 @@ static void __init omap_h4_init(void) { omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAF); + omap_board_config = h4_config; + omap_board_config_size = ARRAY_SIZE(h4_config); + /* * Make sure the serial ports are muxed on at this point. * You have to mux them off in device drivers later on diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index a3fae5697a7..a69e59455ee 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -290,8 +290,6 @@ static struct omap_board_config_kernel ldp_config[] __initdata = { static void __init omap_ldp_init_early(void) { - omap_board_config = ldp_config; - omap_board_config_size = ARRAY_SIZE(ldp_config); omap2_init_common_infrastructure(); omap2_init_common_devices(NULL, NULL); } @@ -422,6 +420,8 @@ static struct mtd_partition ldp_nand_partitions[] = { static void __init omap_ldp_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); + omap_board_config = ldp_config; + omap_board_config_size = ARRAY_SIZE(ldp_config); ldp_init_smsc911x(); omap_i2c_init(); platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices)); diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 5364147892c..3d9b58a53c9 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -732,8 +732,6 @@ static struct omap_board_config_kernel omap3_evm_config[] __initdata = { static void __init omap3_evm_init_early(void) { - omap_board_config = omap3_evm_config; - omap_board_config_size = ARRAY_SIZE(omap3_evm_config); omap2_init_common_infrastructure(); omap2_init_common_devices(mt46h32m32lf6_sdrc_params, NULL); } @@ -824,6 +822,9 @@ static void __init omap3_evm_init(void) else omap3_mux_init(omap35x_board_mux, OMAP_PACKAGE_CBB); + omap_board_config = omap3_evm_config; + omap_board_config_size = ARRAY_SIZE(omap3_evm_config); + omap3_evm_i2c_init(); omap_display_init(&omap3_evm_dss_data); diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 07006c323fc..fd8b7649b14 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -581,8 +581,6 @@ static struct omap_board_config_kernel omap3_stalker_config[] __initdata = { static void __init omap3_stalker_init_early(void) { - omap_board_config = omap3_stalker_config; - omap_board_config_size = ARRAY_SIZE(omap3_stalker_config); omap2_init_common_infrastructure(); omap2_init_common_devices(mt46h32m32lf6_sdrc_params, NULL); } @@ -629,6 +627,8 @@ static struct omap_musb_board_data musb_board_data = { static void __init omap3_stalker_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); + omap_board_config = omap3_stalker_config; + omap_board_config_size = ARRAY_SIZE(omap3_stalker_config); omap3_stalker_i2c_init(); diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index a35afe2227d..8e2a7ba4153 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -417,8 +417,6 @@ static struct omap_board_mux board_mux[] __initdata = { static void __init omap3_touchbook_init_early(void) { - omap_board_config = omap3_touchbook_config; - omap_board_config_size = ARRAY_SIZE(omap3_touchbook_config); omap2_init_common_infrastructure(); omap2_init_common_devices(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); @@ -514,6 +512,9 @@ static struct omap_musb_board_data musb_board_data = { static void __init omap3_touchbook_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); + omap_board_config = omap3_touchbook_config; + omap_board_config_size = ARRAY_SIZE(omap3_touchbook_config); + pm_power_off = omap3_touchbook_poweroff; omap3_touchbook_i2c_init(); diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index a33ec0edec1..d480ddb3952 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -411,8 +411,6 @@ static struct omap_board_config_kernel overo_config[] __initdata = { static void __init overo_init_early(void) { - omap_board_config = overo_config; - omap_board_config_size = ARRAY_SIZE(overo_config); omap2_init_common_infrastructure(); omap2_init_common_devices(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); @@ -448,6 +446,8 @@ static struct omap_musb_board_data musb_board_data = { static void __init overo_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); + omap_board_config = overo_config; + omap_board_config_size = ARRAY_SIZE(overo_config); overo_i2c_init(); platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices)); omap_serial_init(); diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 3cf72fe6d75..e964895b80e 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -102,9 +102,6 @@ static void __init rx51_init_early(void) { struct omap_sdrc_params *sdrc_params; - omap_board_config = rx51_config; - omap_board_config_size = ARRAY_SIZE(rx51_config); - omap3_pm_init_cpuidle(rx51_cpuidle_params); omap2_init_common_infrastructure(); sdrc_params = nokia_get_sdram_timings(); omap2_init_common_devices(sdrc_params, sdrc_params); @@ -127,6 +124,9 @@ static struct omap_musb_board_data musb_board_data = { static void __init rx51_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); + omap_board_config = rx51_config; + omap_board_config_size = ARRAY_SIZE(rx51_config); + omap3_pm_init_cpuidle(rx51_cpuidle_params); omap_serial_init(); usb_musb_init(&musb_board_data); rx51_peripherals_init(); diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c index f2b097190e0..09fa7bfff8d 100644 --- a/arch/arm/mach-omap2/board-ti8168evm.c +++ b/arch/arm/mach-omap2/board-ti8168evm.c @@ -29,8 +29,6 @@ static struct omap_board_config_kernel ti8168_evm_config[] __initdata = { static void __init ti8168_init_early(void) { - omap_board_config = ti8168_evm_config; - omap_board_config_size = ARRAY_SIZE(ti8168_evm_config); omap2_init_common_infrastructure(); omap2_init_common_devices(NULL, NULL); } @@ -43,6 +41,8 @@ static void __init ti8168_evm_init_irq(void) static void __init ti8168_evm_init(void) { omap_serial_init(); + omap_board_config = ti8168_evm_config; + omap_board_config_size = ARRAY_SIZE(ti8168_evm_config); } static void __init ti8168_evm_map_io(void) -- cgit v1.2.3-18-g5258 From 51c404b2c514930e98e81e0b9294f19892a4f871 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Fri, 4 Feb 2011 15:28:57 +0530 Subject: omap4: prcm: Fix the CPUx clockdomain offsets CPU0 and CPU1 clockdomain is at the offset of 0x18 from the LPRM base. The header file has set it wrongly to 0x0. Offset 0x0 is for CPUx power domain control register Fix the same. The autogen scripts is fixed thanks to Benoit Cousson With the old value, the clockdomain code would access the *_PWRSTCTRL.POWERSTATE field when it thought it was accessing the *_CLKSTCTRL.CLKTRCTRL field. In the worst case, this could cause system power management to behave incorrectly. Signed-off-by: Santosh Shilimkar Cc: Paul Walmsley Cc: Rajendra Nayak Cc: Benoit Cousson [paul@pwsan.com: added second paragraph to commit message] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/prcm_mpu44xx.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/prcm_mpu44xx.h b/arch/arm/mach-omap2/prcm_mpu44xx.h index 729a644ce85..3300ff6e3cf 100644 --- a/arch/arm/mach-omap2/prcm_mpu44xx.h +++ b/arch/arm/mach-omap2/prcm_mpu44xx.h @@ -38,8 +38,8 @@ #define OMAP4430_PRCM_MPU_CPU1_INST 0x0800 /* PRCM_MPU clockdomain register offsets (from instance start) */ -#define OMAP4430_PRCM_MPU_CPU0_MPU_CDOFFS 0x0000 -#define OMAP4430_PRCM_MPU_CPU1_MPU_CDOFFS 0x0000 +#define OMAP4430_PRCM_MPU_CPU0_MPU_CDOFFS 0x0018 +#define OMAP4430_PRCM_MPU_CPU1_MPU_CDOFFS 0x0018 /* -- cgit v1.2.3-18-g5258 From 3673d1ef5dc94d8b942c33fe1895a0ff52efbc3c Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Fri, 25 Feb 2011 16:06:46 -0700 Subject: OMAP: powerdomain: remove unused func declaration Trivial fix to remove the unused function declaration from the powerdomain header. Signed-off-by: Rajendra Nayak Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/powerdomain.h | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h index c66431edfeb..0b7a357cb38 100644 --- a/arch/arm/mach-omap2/powerdomain.h +++ b/arch/arm/mach-omap2/powerdomain.h @@ -165,7 +165,6 @@ struct pwrdm_ops { int (*pwrdm_wait_transition)(struct powerdomain *pwrdm); }; -void pwrdm_fw_init(void); void pwrdm_init(struct powerdomain **pwrdm_list, struct pwrdm_ops *custom_funcs); struct powerdomain *pwrdm_lookup(const char *name); -- cgit v1.2.3-18-g5258 From 32d4034eea9c5c2b2edc365e1a0787c8f5b84c3c Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Fri, 25 Feb 2011 16:06:47 -0700 Subject: OMAP: clockdomain: Infrastructure to put arch specific code Put infrastructure in place, so arch specific func pointers can be hooked up to the platform-independent part of the framework. This is in preparation of splitting the clockdomain framework into platform-independent part (for all omaps) and platform-specific parts. Signed-off-by: Rajendra Nayak Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clockdomain.c | 10 ++++++- arch/arm/mach-omap2/clockdomain.h | 37 +++++++++++++++++++++++- arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c | 2 +- arch/arm/mach-omap2/clockdomains44xx_data.c | 2 +- 4 files changed, 47 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index 58e42f76603..f70b06ae866 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -44,6 +44,7 @@ static LIST_HEAD(clkdm_list); /* array of clockdomain deps to be added/removed when clkdm in hwsup mode */ static struct clkdm_autodep *autodeps; +static struct clkdm_ops *arch_clkdm; /* Private functions */ @@ -292,6 +293,7 @@ static void _disable_hwsup(struct clockdomain *clkdm) * clkdm_init - set up the clockdomain layer * @clkdms: optional pointer to an array of clockdomains to register * @init_autodeps: optional pointer to an array of autodeps to register + * @custom_funcs: func pointers for arch specfic implementations * * Set up internal state. If a pointer to an array of clockdomains * @clkdms was supplied, loop through the list of clockdomains, @@ -300,12 +302,18 @@ static void _disable_hwsup(struct clockdomain *clkdm) * @init_autodeps was provided, register those. No return value. */ void clkdm_init(struct clockdomain **clkdms, - struct clkdm_autodep *init_autodeps) + struct clkdm_autodep *init_autodeps, + struct clkdm_ops *custom_funcs) { struct clockdomain **c = NULL; struct clockdomain *clkdm; struct clkdm_autodep *autodep = NULL; + if (!custom_funcs) + WARN(1, "No custom clkdm functions registered\n"); + else + arch_clkdm = custom_funcs; + if (clkdms) for (c = clkdms; *c; c++) _clkdm_register(*c); diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index 9b459c26fb8..71ad265cf13 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -116,7 +116,42 @@ struct clockdomain { struct list_head node; }; -void clkdm_init(struct clockdomain **clkdms, struct clkdm_autodep *autodeps); +/** + * struct clkdm_ops - Arch specfic function implementations + * @clkdm_add_wkdep: Add a wakeup dependency between clk domains + * @clkdm_del_wkdep: Delete a wakeup dependency between clk domains + * @clkdm_read_wkdep: Read wakeup dependency state between clk domains + * @clkdm_clear_all_wkdeps: Remove all wakeup dependencies from the clk domain + * @clkdm_add_sleepdep: Add a sleep dependency between clk domains + * @clkdm_del_sleepdep: Delete a sleep dependency between clk domains + * @clkdm_read_sleepdep: Read sleep dependency state between clk domains + * @clkdm_clear_all_sleepdeps: Remove all sleep dependencies from the clk domain + * @clkdm_sleep: Force a clockdomain to sleep + * @clkdm_wakeup: Force a clockdomain to wakeup + * @clkdm_allow_idle: Enable hw supervised idle transitions for clock domain + * @clkdm_deny_idle: Disable hw supervised idle transitions for clock domain + * @clkdm_clk_enable: Put the clkdm in right state for a clock enable + * @clkdm_clk_disable: Put the clkdm in right state for a clock disable + */ +struct clkdm_ops { + int (*clkdm_add_wkdep)(struct clockdomain *clkdm1, struct clockdomain *clkdm2); + int (*clkdm_del_wkdep)(struct clockdomain *clkdm1, struct clockdomain *clkdm2); + int (*clkdm_read_wkdep)(struct clockdomain *clkdm1, struct clockdomain *clkdm2); + int (*clkdm_clear_all_wkdeps)(struct clockdomain *clkdm); + int (*clkdm_add_sleepdep)(struct clockdomain *clkdm1, struct clockdomain *clkdm2); + int (*clkdm_del_sleepdep)(struct clockdomain *clkdm1, struct clockdomain *clkdm2); + int (*clkdm_read_sleepdep)(struct clockdomain *clkdm1, struct clockdomain *clkdm2); + int (*clkdm_clear_all_sleepdeps)(struct clockdomain *clkdm); + int (*clkdm_sleep)(struct clockdomain *clkdm); + int (*clkdm_wakeup)(struct clockdomain *clkdm); + void (*clkdm_allow_idle)(struct clockdomain *clkdm); + void (*clkdm_deny_idle)(struct clockdomain *clkdm); + int (*clkdm_clk_enable)(struct clockdomain *clkdm); + int (*clkdm_clk_disable)(struct clockdomain *clkdm); +}; + +void clkdm_init(struct clockdomain **clkdms, struct clkdm_autodep *autodeps, + struct clkdm_ops *custom_funcs); struct clockdomain *clkdm_lookup(const char *name); int clkdm_for_each(int (*fn)(struct clockdomain *clkdm, void *user), diff --git a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c index e6f0d18d5e8..e2a959eab31 100644 --- a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c +++ b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c @@ -856,5 +856,5 @@ static struct clockdomain *clockdomains_omap2[] __initdata = { void __init omap2_clockdomains_init(void) { - clkdm_init(clockdomains_omap2, clkdm_autodeps); + clkdm_init(clockdomains_omap2, clkdm_autodeps, NULL); } diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c index 10622c914ab..a5000d473d4 100644 --- a/arch/arm/mach-omap2/clockdomains44xx_data.c +++ b/arch/arm/mach-omap2/clockdomains44xx_data.c @@ -305,5 +305,5 @@ static struct clockdomain *clockdomains_omap44xx[] __initdata = { void __init omap44xx_clockdomains_init(void) { - clkdm_init(clockdomains_omap44xx, NULL); + clkdm_init(clockdomains_omap44xx, NULL, NULL); } -- cgit v1.2.3-18-g5258 From 4aef7a2a5aad52b60ac1a2f3cee055b8271b70d5 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Fri, 25 Feb 2011 16:06:47 -0700 Subject: OMAP: clockdomain: Arch specific funcs to handle deps Define the following architecture specific funtions for omap2/3 .clkdm_add_wkdep .clkdm_del_wkdep .clkdm_read_wkdep .clkdm_clear_all_wkdeps .clkdm_add_sleepdep .clkdm_del_sleepdep .clkdm_read_sleepdep .clkdm_clear_all_sleepdeps Convert the platform-independent framework to call these functions. With this also move the clkdm lookups for all wkdep_srcs and sleepdep_srcs at clkdm_init. Signed-off-by: Rajendra Nayak [paul@pwsan.com: fixed loop termination conditions in omap*_clkdm_clear_all_*(); thanks to Kevin Hilman for finding and helping fix those bugs; also avoid re-resolving clockdomains during init; abstracted out clkdm_dep walk] Cc: Kevin Hilman Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/Makefile | 2 + arch/arm/mach-omap2/clockdomain.c | 177 +++++++++++++---------- arch/arm/mach-omap2/clockdomain.h | 6 +- arch/arm/mach-omap2/clockdomain2xxx_3xxx.c | 130 +++++++++++++++++ arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c | 9 +- arch/arm/mach-omap2/io.c | 6 +- 6 files changed, 246 insertions(+), 84 deletions(-) create mode 100644 arch/arm/mach-omap2/clockdomain2xxx_3xxx.c (limited to 'arch') diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index ee72a9787bf..759d9ebd79c 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -102,8 +102,10 @@ obj-$(CONFIG_ARCH_OMAP4) += $(powerdomain-common) \ # PRCM clockdomain control obj-$(CONFIG_ARCH_OMAP2) += clockdomain.o \ + clockdomain2xxx_3xxx.o \ clockdomains2xxx_3xxx_data.o obj-$(CONFIG_ARCH_OMAP3) += clockdomain.o \ + clockdomain2xxx_3xxx.o \ clockdomains2xxx_3xxx_data.o obj-$(CONFIG_ARCH_OMAP4) += clockdomain.o \ clockdomains44xx_data.o diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index f70b06ae866..895c153c18e 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -287,6 +287,32 @@ static void _disable_hwsup(struct clockdomain *clkdm) BUG(); } +/** + * _resolve_clkdm_deps() - resolve clkdm_names in @clkdm_deps to clkdms + * @clkdm: clockdomain that we are resolving dependencies for + * @clkdm_deps: ptr to array of struct clkdm_deps to resolve + * + * Iterates through @clkdm_deps, looking up the struct clockdomain named by + * clkdm_name and storing the clockdomain pointer in the struct clkdm_dep. + * No return value. + */ +static void _resolve_clkdm_deps(struct clockdomain *clkdm, + struct clkdm_dep *clkdm_deps) +{ + struct clkdm_dep *cd; + + for (cd = clkdm_deps; cd && cd->clkdm_name; cd++) { + if (!omap_chip_is(cd->omap_chip)) + continue; + if (cd->clkdm) + continue; + cd->clkdm = _clkdm_lookup(cd->clkdm_name); + + WARN(!cd->clkdm, "clockdomain: %s: could not find clkdm %s while resolving dependencies - should never happen", + clkdm->name, cd->clkdm_name); + } +} + /* Public functions */ /** @@ -333,7 +359,10 @@ void clkdm_init(struct clockdomain **clkdms, else if (clkdm->flags & CLKDM_CAN_DISABLE_AUTO) omap2_clkdm_deny_idle(clkdm); + _resolve_clkdm_deps(clkdm, clkdm->wkdep_srcs); clkdm_clear_all_wkdeps(clkdm); + + _resolve_clkdm_deps(clkdm, clkdm->sleepdep_srcs); clkdm_clear_all_sleepdeps(clkdm); } } @@ -430,6 +459,7 @@ struct powerdomain *clkdm_get_pwrdm(struct clockdomain *clkdm) int clkdm_add_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) { struct clkdm_dep *cd; + int ret = 0; if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) { pr_err("clockdomain: %s/%s: %s: not yet implemented\n", @@ -441,21 +471,26 @@ int clkdm_add_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) return -EINVAL; cd = _clkdm_deps_lookup(clkdm2, clkdm1->wkdep_srcs); - if (IS_ERR(cd)) { + if (IS_ERR(cd)) + ret = PTR_ERR(cd); + + if (!arch_clkdm || !arch_clkdm->clkdm_add_wkdep) + ret = -EINVAL; + + if (ret) { pr_debug("clockdomain: hardware cannot set/clear wake up of " "%s when %s wakes up\n", clkdm1->name, clkdm2->name); - return PTR_ERR(cd); + return ret; } if (atomic_inc_return(&cd->wkdep_usecount) == 1) { pr_debug("clockdomain: hardware will wake up %s when %s wakes " "up\n", clkdm1->name, clkdm2->name); - omap2_prm_set_mod_reg_bits((1 << clkdm2->dep_bit), - clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP); + ret = arch_clkdm->clkdm_add_wkdep(clkdm1, clkdm2); } - return 0; + return ret; } /** @@ -471,6 +506,7 @@ int clkdm_add_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) int clkdm_del_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) { struct clkdm_dep *cd; + int ret = 0; if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) { pr_err("clockdomain: %s/%s: %s: not yet implemented\n", @@ -482,21 +518,26 @@ int clkdm_del_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) return -EINVAL; cd = _clkdm_deps_lookup(clkdm2, clkdm1->wkdep_srcs); - if (IS_ERR(cd)) { + if (IS_ERR(cd)) + ret = PTR_ERR(cd); + + if (!arch_clkdm || !arch_clkdm->clkdm_del_wkdep) + ret = -EINVAL; + + if (ret) { pr_debug("clockdomain: hardware cannot set/clear wake up of " "%s when %s wakes up\n", clkdm1->name, clkdm2->name); - return PTR_ERR(cd); + return ret; } if (atomic_dec_return(&cd->wkdep_usecount) == 0) { pr_debug("clockdomain: hardware will no longer wake up %s " "after %s wakes up\n", clkdm1->name, clkdm2->name); - omap2_prm_clear_mod_reg_bits((1 << clkdm2->dep_bit), - clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP); + ret = arch_clkdm->clkdm_del_wkdep(clkdm1, clkdm2); } - return 0; + return ret; } /** @@ -516,6 +557,7 @@ int clkdm_del_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) int clkdm_read_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) { struct clkdm_dep *cd; + int ret = 0; if (!clkdm1 || !clkdm2) return -EINVAL; @@ -527,15 +569,20 @@ int clkdm_read_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) } cd = _clkdm_deps_lookup(clkdm2, clkdm1->wkdep_srcs); - if (IS_ERR(cd)) { + if (IS_ERR(cd)) + ret = PTR_ERR(cd); + + if (!arch_clkdm || !arch_clkdm->clkdm_read_wkdep) + ret = -EINVAL; + + if (ret) { pr_debug("clockdomain: hardware cannot set/clear wake up of " "%s when %s wakes up\n", clkdm1->name, clkdm2->name); - return PTR_ERR(cd); + return ret; } /* XXX It's faster to return the atomic wkdep_usecount */ - return omap2_prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP, - (1 << clkdm2->dep_bit)); + return arch_clkdm->clkdm_read_wkdep(clkdm1, clkdm2); } /** @@ -550,9 +597,6 @@ int clkdm_read_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) */ int clkdm_clear_all_wkdeps(struct clockdomain *clkdm) { - struct clkdm_dep *cd; - u32 mask = 0; - if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) { pr_err("clockdomain: %s: %s: not yet implemented\n", clkdm->name, __func__); @@ -562,21 +606,10 @@ int clkdm_clear_all_wkdeps(struct clockdomain *clkdm) if (!clkdm) return -EINVAL; - for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) { - if (!omap_chip_is(cd->omap_chip)) - continue; - - if (!cd->clkdm && cd->clkdm_name) - cd->clkdm = _clkdm_lookup(cd->clkdm_name); - - /* PRM accesses are slow, so minimize them */ - mask |= 1 << cd->clkdm->dep_bit; - atomic_set(&cd->wkdep_usecount, 0); - } - - omap2_prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs, PM_WKDEP); + if (!arch_clkdm || !arch_clkdm->clkdm_clear_all_wkdeps) + return -EINVAL; - return 0; + return arch_clkdm->clkdm_clear_all_wkdeps(clkdm); } /** @@ -594,31 +627,33 @@ int clkdm_clear_all_wkdeps(struct clockdomain *clkdm) int clkdm_add_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) { struct clkdm_dep *cd; - - if (!cpu_is_omap34xx()) - return -EINVAL; + int ret = 0; if (!clkdm1 || !clkdm2) return -EINVAL; cd = _clkdm_deps_lookup(clkdm2, clkdm1->sleepdep_srcs); - if (IS_ERR(cd)) { + if (IS_ERR(cd)) + ret = PTR_ERR(cd); + + if (!arch_clkdm || !arch_clkdm->clkdm_add_sleepdep) + ret = -EINVAL; + + if (ret) { pr_debug("clockdomain: hardware cannot set/clear sleep " "dependency affecting %s from %s\n", clkdm1->name, clkdm2->name); - return PTR_ERR(cd); + return ret; } if (atomic_inc_return(&cd->sleepdep_usecount) == 1) { pr_debug("clockdomain: will prevent %s from sleeping if %s " "is active\n", clkdm1->name, clkdm2->name); - omap2_cm_set_mod_reg_bits((1 << clkdm2->dep_bit), - clkdm1->pwrdm.ptr->prcm_offs, - OMAP3430_CM_SLEEPDEP); + ret = arch_clkdm->clkdm_add_sleepdep(clkdm1, clkdm2); } - return 0; + return ret; } /** @@ -636,19 +671,23 @@ int clkdm_add_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) int clkdm_del_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) { struct clkdm_dep *cd; - - if (!cpu_is_omap34xx()) - return -EINVAL; + int ret = 0; if (!clkdm1 || !clkdm2) return -EINVAL; cd = _clkdm_deps_lookup(clkdm2, clkdm1->sleepdep_srcs); - if (IS_ERR(cd)) { + if (IS_ERR(cd)) + ret = PTR_ERR(cd); + + if (!arch_clkdm || !arch_clkdm->clkdm_del_sleepdep) + ret = -EINVAL; + + if (ret) { pr_debug("clockdomain: hardware cannot set/clear sleep " "dependency affecting %s from %s\n", clkdm1->name, clkdm2->name); - return PTR_ERR(cd); + return ret; } if (atomic_dec_return(&cd->sleepdep_usecount) == 0) { @@ -656,12 +695,10 @@ int clkdm_del_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) "sleeping if %s is active\n", clkdm1->name, clkdm2->name); - omap2_cm_clear_mod_reg_bits((1 << clkdm2->dep_bit), - clkdm1->pwrdm.ptr->prcm_offs, - OMAP3430_CM_SLEEPDEP); + ret = arch_clkdm->clkdm_del_sleepdep(clkdm1, clkdm2); } - return 0; + return ret; } /** @@ -683,25 +720,27 @@ int clkdm_del_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) int clkdm_read_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) { struct clkdm_dep *cd; - - if (!cpu_is_omap34xx()) - return -EINVAL; + int ret = 0; if (!clkdm1 || !clkdm2) return -EINVAL; cd = _clkdm_deps_lookup(clkdm2, clkdm1->sleepdep_srcs); - if (IS_ERR(cd)) { + if (IS_ERR(cd)) + ret = PTR_ERR(cd); + + if (!arch_clkdm || !arch_clkdm->clkdm_read_sleepdep) + ret = -EINVAL; + + if (ret) { pr_debug("clockdomain: hardware cannot set/clear sleep " "dependency affecting %s from %s\n", clkdm1->name, clkdm2->name); - return PTR_ERR(cd); + return ret; } /* XXX It's faster to return the atomic sleepdep_usecount */ - return omap2_prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs, - OMAP3430_CM_SLEEPDEP, - (1 << clkdm2->dep_bit)); + return arch_clkdm->clkdm_read_sleepdep(clkdm1, clkdm2); } /** @@ -716,31 +755,13 @@ int clkdm_read_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) */ int clkdm_clear_all_sleepdeps(struct clockdomain *clkdm) { - struct clkdm_dep *cd; - u32 mask = 0; - - if (!cpu_is_omap34xx()) - return -EINVAL; - if (!clkdm) return -EINVAL; - for (cd = clkdm->sleepdep_srcs; cd && cd->clkdm_name; cd++) { - if (!omap_chip_is(cd->omap_chip)) - continue; - - if (!cd->clkdm && cd->clkdm_name) - cd->clkdm = _clkdm_lookup(cd->clkdm_name); - - /* PRM accesses are slow, so minimize them */ - mask |= 1 << cd->clkdm->dep_bit; - atomic_set(&cd->sleepdep_usecount, 0); - } - - omap2_prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs, - OMAP3430_CM_SLEEPDEP); + if (!arch_clkdm || !arch_clkdm->clkdm_clear_all_sleepdeps) + return -EINVAL; - return 0; + return arch_clkdm->clkdm_clear_all_sleepdeps(clkdm); } /** diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index 71ad265cf13..90b6d6a5086 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -176,7 +176,11 @@ int omap2_clkdm_sleep(struct clockdomain *clkdm); int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk); int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk); -extern void __init omap2_clockdomains_init(void); +extern void __init omap2xxx_clockdomains_init(void); +extern void __init omap3xxx_clockdomains_init(void); extern void __init omap44xx_clockdomains_init(void); +extern struct clkdm_ops omap2_clkdm_operations; +extern struct clkdm_ops omap3_clkdm_operations; + #endif diff --git a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c new file mode 100644 index 00000000000..a1fd6fd5a46 --- /dev/null +++ b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c @@ -0,0 +1,130 @@ +/* + * OMAP2 and OMAP3 clockdomain control + * + * Copyright (C) 2008-2010 Texas Instruments, Inc. + * Copyright (C) 2008-2010 Nokia Corporation + * + * Derived from mach-omap2/clockdomain.c written by Paul Walmsley + * Rajendra Nayak + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include "prm.h" +#include "prm2xxx_3xxx.h" +#include "cm.h" +#include "cm2xxx_3xxx.h" +#include "cm-regbits-24xx.h" +#include "cm-regbits-34xx.h" +#include "clockdomain.h" + +static int omap2_clkdm_add_wkdep(struct clockdomain *clkdm1, + struct clockdomain *clkdm2) +{ + omap2_prm_set_mod_reg_bits((1 << clkdm2->dep_bit), + clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP); + return 0; +} + +static int omap2_clkdm_del_wkdep(struct clockdomain *clkdm1, + struct clockdomain *clkdm2) +{ + omap2_prm_clear_mod_reg_bits((1 << clkdm2->dep_bit), + clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP); + return 0; +} + +static int omap2_clkdm_read_wkdep(struct clockdomain *clkdm1, + struct clockdomain *clkdm2) +{ + return omap2_prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs, + PM_WKDEP, (1 << clkdm2->dep_bit)); +} + +static int omap2_clkdm_clear_all_wkdeps(struct clockdomain *clkdm) +{ + struct clkdm_dep *cd; + u32 mask = 0; + + for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) { + if (!omap_chip_is(cd->omap_chip)) + continue; + if (!cd->clkdm) + continue; /* only happens if data is erroneous */ + + /* PRM accesses are slow, so minimize them */ + mask |= 1 << cd->clkdm->dep_bit; + atomic_set(&cd->wkdep_usecount, 0); + } + + omap2_prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs, + PM_WKDEP); + return 0; +} + +static int omap3_clkdm_add_sleepdep(struct clockdomain *clkdm1, + struct clockdomain *clkdm2) +{ + omap2_cm_set_mod_reg_bits((1 << clkdm2->dep_bit), + clkdm1->pwrdm.ptr->prcm_offs, + OMAP3430_CM_SLEEPDEP); + return 0; +} + +static int omap3_clkdm_del_sleepdep(struct clockdomain *clkdm1, + struct clockdomain *clkdm2) +{ + omap2_cm_clear_mod_reg_bits((1 << clkdm2->dep_bit), + clkdm1->pwrdm.ptr->prcm_offs, + OMAP3430_CM_SLEEPDEP); + return 0; +} + +static int omap3_clkdm_read_sleepdep(struct clockdomain *clkdm1, + struct clockdomain *clkdm2) +{ + return omap2_prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs, + OMAP3430_CM_SLEEPDEP, (1 << clkdm2->dep_bit)); +} + +static int omap3_clkdm_clear_all_sleepdeps(struct clockdomain *clkdm) +{ + struct clkdm_dep *cd; + u32 mask = 0; + + for (cd = clkdm->sleepdep_srcs; cd && cd->clkdm_name; cd++) { + if (!omap_chip_is(cd->omap_chip)) + continue; + if (!cd->clkdm) + continue; /* only happens if data is erroneous */ + + /* PRM accesses are slow, so minimize them */ + mask |= 1 << cd->clkdm->dep_bit; + atomic_set(&cd->sleepdep_usecount, 0); + } + omap2_prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs, + OMAP3430_CM_SLEEPDEP); + return 0; +} + +struct clkdm_ops omap2_clkdm_operations = { + .clkdm_add_wkdep = omap2_clkdm_add_wkdep, + .clkdm_del_wkdep = omap2_clkdm_del_wkdep, + .clkdm_read_wkdep = omap2_clkdm_read_wkdep, + .clkdm_clear_all_wkdeps = omap2_clkdm_clear_all_wkdeps, +}; + +struct clkdm_ops omap3_clkdm_operations = { + .clkdm_add_wkdep = omap2_clkdm_add_wkdep, + .clkdm_del_wkdep = omap2_clkdm_del_wkdep, + .clkdm_read_wkdep = omap2_clkdm_read_wkdep, + .clkdm_clear_all_wkdeps = omap2_clkdm_clear_all_wkdeps, + .clkdm_add_sleepdep = omap3_clkdm_add_sleepdep, + .clkdm_del_sleepdep = omap3_clkdm_del_sleepdep, + .clkdm_read_sleepdep = omap3_clkdm_read_sleepdep, + .clkdm_clear_all_sleepdeps = omap3_clkdm_clear_all_sleepdeps, +}; diff --git a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c index e2a959eab31..ffdfe54f326 100644 --- a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c +++ b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c @@ -854,7 +854,12 @@ static struct clockdomain *clockdomains_omap2[] __initdata = { NULL, }; -void __init omap2_clockdomains_init(void) +void __init omap2xxx_clockdomains_init(void) { - clkdm_init(clockdomains_omap2, clkdm_autodeps, NULL); + clkdm_init(clockdomains_omap2, clkdm_autodeps, &omap2_clkdm_operations); +} + +void __init omap3xxx_clockdomains_init(void) +{ + clkdm_init(clockdomains_omap2, clkdm_autodeps, &omap3_clkdm_operations); } diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index b8b49e4ae92..03f71ec3cd8 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -357,15 +357,15 @@ void __init omap2_init_common_infrastructure(void) if (cpu_is_omap242x()) { omap2xxx_powerdomains_init(); - omap2_clockdomains_init(); + omap2xxx_clockdomains_init(); omap2420_hwmod_init(); } else if (cpu_is_omap243x()) { omap2xxx_powerdomains_init(); - omap2_clockdomains_init(); + omap2xxx_clockdomains_init(); omap2430_hwmod_init(); } else if (cpu_is_omap34xx()) { omap3xxx_powerdomains_init(); - omap2_clockdomains_init(); + omap3xxx_clockdomains_init(); omap3xxx_hwmod_init(); } else if (cpu_is_omap44xx()) { omap44xx_powerdomains_init(); -- cgit v1.2.3-18-g5258 From 68b921ad7f35e0323ce0d9fe94e5701a112f257c Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Fri, 25 Feb 2011 16:06:47 -0700 Subject: OMAP: clockdomain: Arch specific funcs for sleep/wakeup of clkdm Define the following architecture specific funtions for omap2/3/4 .clkdm_sleep .clkdm_wakeup Convert the platform-independent framework to call these functions. Also rename the api's by removing the omap2_ preamble. Hence call omap2_clkdm_wakeup as clkdm_wakeup and omap2_clkdm_sleep as clkdm_sleep. Signed-off-by: Rajendra Nayak [paul@pwsan.com: fixed omap3_clkdm_clear_all_sleepdeps() and omap2_clkdm_clear_all_wkdeps() to test against the correct loop termination condition; thanks to Kevin Hilman for finding and helping fix] Cc: Kevin Hilman Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/Makefile | 1 + arch/arm/mach-omap2/clockdomain.c | 64 +++++++---------------------- arch/arm/mach-omap2/clockdomain.h | 5 ++- arch/arm/mach-omap2/clockdomain2xxx_3xxx.c | 35 ++++++++++++++++ arch/arm/mach-omap2/clockdomain44xx.c | 35 ++++++++++++++++ arch/arm/mach-omap2/clockdomains44xx_data.c | 2 +- arch/arm/mach-omap2/pm.c | 4 +- arch/arm/mach-omap2/pm24xx.c | 6 +-- arch/arm/mach-omap2/pm34xx.c | 2 +- 9 files changed, 96 insertions(+), 58 deletions(-) create mode 100644 arch/arm/mach-omap2/clockdomain44xx.c (limited to 'arch') diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 759d9ebd79c..10c3c8f16ea 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -108,6 +108,7 @@ obj-$(CONFIG_ARCH_OMAP3) += clockdomain.o \ clockdomain2xxx_3xxx.o \ clockdomains2xxx_3xxx_data.o obj-$(CONFIG_ARCH_OMAP4) += clockdomain.o \ + clockdomain44xx.o \ clockdomains44xx_data.o # Clock framework obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o \ diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index 895c153c18e..3035eb9eec3 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -355,7 +355,7 @@ void clkdm_init(struct clockdomain **clkdms, */ list_for_each_entry(clkdm, &clkdm_list, node) { if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) - omap2_clkdm_wakeup(clkdm); + clkdm_wakeup(clkdm); else if (clkdm->flags & CLKDM_CAN_DISABLE_AUTO) omap2_clkdm_deny_idle(clkdm); @@ -765,7 +765,7 @@ int clkdm_clear_all_sleepdeps(struct clockdomain *clkdm) } /** - * omap2_clkdm_sleep - force clockdomain sleep transition + * clkdm_sleep - force clockdomain sleep transition * @clkdm: struct clockdomain * * * Instruct the CM to force a sleep transition on the specified @@ -773,7 +773,7 @@ int clkdm_clear_all_sleepdeps(struct clockdomain *clkdm) * clockdomain does not support software-initiated sleep; 0 upon * success. */ -int omap2_clkdm_sleep(struct clockdomain *clkdm) +int clkdm_sleep(struct clockdomain *clkdm) { if (!clkdm) return -EINVAL; @@ -784,33 +784,16 @@ int omap2_clkdm_sleep(struct clockdomain *clkdm) return -EINVAL; } - pr_debug("clockdomain: forcing sleep on %s\n", clkdm->name); - - if (cpu_is_omap24xx()) { - - omap2_cm_set_mod_reg_bits(OMAP24XX_FORCESTATE_MASK, - clkdm->pwrdm.ptr->prcm_offs, OMAP2_PM_PWSTCTRL); - - } else if (cpu_is_omap34xx()) { - - omap3xxx_cm_clkdm_force_sleep(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); - - } else if (cpu_is_omap44xx()) { - - omap4_cminst_clkdm_force_sleep(clkdm->prcm_partition, - clkdm->cm_inst, - clkdm->clkdm_offs); + if (!arch_clkdm || !arch_clkdm->clkdm_sleep) + return -EINVAL; - } else { - BUG(); - }; + pr_debug("clockdomain: forcing sleep on %s\n", clkdm->name); - return 0; + return arch_clkdm->clkdm_sleep(clkdm); } /** - * omap2_clkdm_wakeup - force clockdomain wakeup transition + * clkdm_wakeup - force clockdomain wakeup transition * @clkdm: struct clockdomain * * * Instruct the CM to force a wakeup transition on the specified @@ -818,7 +801,7 @@ int omap2_clkdm_sleep(struct clockdomain *clkdm) * clockdomain does not support software-controlled wakeup; 0 upon * success. */ -int omap2_clkdm_wakeup(struct clockdomain *clkdm) +int clkdm_wakeup(struct clockdomain *clkdm) { if (!clkdm) return -EINVAL; @@ -829,29 +812,12 @@ int omap2_clkdm_wakeup(struct clockdomain *clkdm) return -EINVAL; } - pr_debug("clockdomain: forcing wakeup on %s\n", clkdm->name); - - if (cpu_is_omap24xx()) { - - omap2_cm_clear_mod_reg_bits(OMAP24XX_FORCESTATE_MASK, - clkdm->pwrdm.ptr->prcm_offs, OMAP2_PM_PWSTCTRL); - - } else if (cpu_is_omap34xx()) { - - omap3xxx_cm_clkdm_force_wakeup(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); - - } else if (cpu_is_omap44xx()) { - - omap4_cminst_clkdm_force_wakeup(clkdm->prcm_partition, - clkdm->cm_inst, - clkdm->clkdm_offs); + if (!arch_clkdm || !arch_clkdm->clkdm_wakeup) + return -EINVAL; - } else { - BUG(); - }; + pr_debug("clockdomain: forcing wakeup on %s\n", clkdm->name); - return 0; + return arch_clkdm->clkdm_wakeup(clkdm); } /** @@ -990,7 +956,7 @@ int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk) _clkdm_add_autodeps(clkdm); _enable_hwsup(clkdm); } else { - omap2_clkdm_wakeup(clkdm); + clkdm_wakeup(clkdm); } pwrdm_wait_transition(clkdm->pwrdm.ptr); @@ -1062,7 +1028,7 @@ int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk) _clkdm_del_autodeps(clkdm); _enable_hwsup(clkdm); } else { - omap2_clkdm_sleep(clkdm); + clkdm_sleep(clkdm); } pwrdm_clkdm_state_switch(clkdm); diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index 90b6d6a5086..7a5cb5cf994 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -170,8 +170,8 @@ int clkdm_clear_all_sleepdeps(struct clockdomain *clkdm); void omap2_clkdm_allow_idle(struct clockdomain *clkdm); void omap2_clkdm_deny_idle(struct clockdomain *clkdm); -int omap2_clkdm_wakeup(struct clockdomain *clkdm); -int omap2_clkdm_sleep(struct clockdomain *clkdm); +int clkdm_wakeup(struct clockdomain *clkdm); +int clkdm_sleep(struct clockdomain *clkdm); int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk); int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk); @@ -182,5 +182,6 @@ extern void __init omap44xx_clockdomains_init(void); extern struct clkdm_ops omap2_clkdm_operations; extern struct clkdm_ops omap3_clkdm_operations; +extern struct clkdm_ops omap4_clkdm_operations; #endif diff --git a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c index a1fd6fd5a46..08c87fe3da1 100644 --- a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c +++ b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c @@ -20,6 +20,7 @@ #include "cm2xxx_3xxx.h" #include "cm-regbits-24xx.h" #include "cm-regbits-34xx.h" +#include "prm-regbits-24xx.h" #include "clockdomain.h" static int omap2_clkdm_add_wkdep(struct clockdomain *clkdm1, @@ -111,11 +112,43 @@ static int omap3_clkdm_clear_all_sleepdeps(struct clockdomain *clkdm) return 0; } +static int omap2_clkdm_sleep(struct clockdomain *clkdm) +{ + omap2_cm_set_mod_reg_bits(OMAP24XX_FORCESTATE_MASK, + clkdm->pwrdm.ptr->prcm_offs, + OMAP2_PM_PWSTCTRL); + return 0; +} + +static int omap2_clkdm_wakeup(struct clockdomain *clkdm) +{ + omap2_cm_clear_mod_reg_bits(OMAP24XX_FORCESTATE_MASK, + clkdm->pwrdm.ptr->prcm_offs, + OMAP2_PM_PWSTCTRL); + return 0; +} + +static int omap3_clkdm_sleep(struct clockdomain *clkdm) +{ + omap3xxx_cm_clkdm_force_sleep(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + return 0; +} + +static int omap3_clkdm_wakeup(struct clockdomain *clkdm) +{ + omap3xxx_cm_clkdm_force_wakeup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + return 0; +} + struct clkdm_ops omap2_clkdm_operations = { .clkdm_add_wkdep = omap2_clkdm_add_wkdep, .clkdm_del_wkdep = omap2_clkdm_del_wkdep, .clkdm_read_wkdep = omap2_clkdm_read_wkdep, .clkdm_clear_all_wkdeps = omap2_clkdm_clear_all_wkdeps, + .clkdm_sleep = omap2_clkdm_sleep, + .clkdm_wakeup = omap2_clkdm_wakeup, }; struct clkdm_ops omap3_clkdm_operations = { @@ -127,4 +160,6 @@ struct clkdm_ops omap3_clkdm_operations = { .clkdm_del_sleepdep = omap3_clkdm_del_sleepdep, .clkdm_read_sleepdep = omap3_clkdm_read_sleepdep, .clkdm_clear_all_sleepdeps = omap3_clkdm_clear_all_sleepdeps, + .clkdm_sleep = omap3_clkdm_sleep, + .clkdm_wakeup = omap3_clkdm_wakeup, }; diff --git a/arch/arm/mach-omap2/clockdomain44xx.c b/arch/arm/mach-omap2/clockdomain44xx.c new file mode 100644 index 00000000000..9ccb406cf54 --- /dev/null +++ b/arch/arm/mach-omap2/clockdomain44xx.c @@ -0,0 +1,35 @@ +/* + * OMAP4 clockdomain control + * + * Copyright (C) 2008-2010 Texas Instruments, Inc. + * Copyright (C) 2008-2010 Nokia Corporation + * + * Derived from mach-omap2/clockdomain.c written by Paul Walmsley + * Rajendra Nayak + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "clockdomain.h" +#include "cminst44xx.h" + +static int omap4_clkdm_sleep(struct clockdomain *clkdm) +{ + omap4_cminst_clkdm_force_sleep(clkdm->prcm_partition, + clkdm->cm_inst, clkdm->clkdm_offs); + return 0; +} + +static int omap4_clkdm_wakeup(struct clockdomain *clkdm) +{ + omap4_cminst_clkdm_force_wakeup(clkdm->prcm_partition, + clkdm->cm_inst, clkdm->clkdm_offs); + return 0; +} + +struct clkdm_ops omap4_clkdm_operations = { + .clkdm_sleep = omap4_clkdm_sleep, + .clkdm_wakeup = omap4_clkdm_wakeup, +}; diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c index a5000d473d4..eea6f8e4028 100644 --- a/arch/arm/mach-omap2/clockdomains44xx_data.c +++ b/arch/arm/mach-omap2/clockdomains44xx_data.c @@ -305,5 +305,5 @@ static struct clockdomain *clockdomains_omap44xx[] __initdata = { void __init omap44xx_clockdomains_init(void) { - clkdm_init(clockdomains_omap44xx, NULL, NULL); + clkdm_init(clockdomains_omap44xx, NULL, &omap4_clkdm_operations); } diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index d5a102c7198..74c31008079 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -124,7 +124,7 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state) (pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE)) { sleep_switch = LOWPOWERSTATE_SWITCH; } else { - omap2_clkdm_wakeup(pwrdm->pwrdm_clkdms[0]); + clkdm_wakeup(pwrdm->pwrdm_clkdms[0]); pwrdm_wait_transition(pwrdm); sleep_switch = FORCEWAKEUP_SWITCH; } @@ -142,7 +142,7 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state) if (pwrdm->pwrdm_clkdms[0]->flags & CLKDM_CAN_ENABLE_AUTO) omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]); else - omap2_clkdm_sleep(pwrdm->pwrdm_clkdms[0]); + clkdm_sleep(pwrdm->pwrdm_clkdms[0]); break; case LOWPOWERSTATE_SWITCH: pwrdm_set_lowpwrstchange(pwrdm); diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index 97feb3ab6a6..4125621bf59 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -370,7 +370,7 @@ static int __init clkdms_setup(struct clockdomain *clkdm, void *unused) omap2_clkdm_allow_idle(clkdm); else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP && atomic_read(&clkdm->usecount) == 0) - omap2_clkdm_sleep(clkdm); + clkdm_sleep(clkdm); return 0; } @@ -405,11 +405,11 @@ static void __init prcm_setup_regs(void) pwrdm = clkdm_get_pwrdm(dsp_clkdm); pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF); - omap2_clkdm_sleep(dsp_clkdm); + clkdm_sleep(dsp_clkdm); pwrdm = clkdm_get_pwrdm(gfx_clkdm); pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF); - omap2_clkdm_sleep(gfx_clkdm); + clkdm_sleep(gfx_clkdm); /* * Clear clockdomain wakeup dependencies and enable diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 2f864e4b085..81df2b169a5 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -993,7 +993,7 @@ static int __init clkdms_setup(struct clockdomain *clkdm, void *unused) omap2_clkdm_allow_idle(clkdm); else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP && atomic_read(&clkdm->usecount) == 0) - omap2_clkdm_sleep(clkdm); + clkdm_sleep(clkdm); return 0; } -- cgit v1.2.3-18-g5258 From 5cd1937b6d5990fe5d5287d925f05afd38e9fb02 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Fri, 25 Feb 2011 16:06:48 -0700 Subject: OMAP: clockdomain: Arch specific funcs for hwsup control of clkdm Define the following architecture specific funtions for omap2/3/4 .clkdm_allow_idle .clkdm_deny_idle Convert the platform-independent framework to call these functions. Also rename the api's by removing the omap2_ preamble. Hence call omap2_clkdm_allow_idle as clkdm_allow_idle and omap2_clkdm_deny_idle as clkdm_deny_idle. Make the _clkdm_add_autodeps and _clkdm_del_autodeps as non-static so they can be accessed from OMAP2/3 platform specific code. Signed-off-by: Rajendra Nayak Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clockdomain.c | 47 ++++++++++-------------------- arch/arm/mach-omap2/clockdomain.h | 6 ++-- arch/arm/mach-omap2/clockdomain2xxx_3xxx.c | 40 +++++++++++++++++++++++++ arch/arm/mach-omap2/clockdomain44xx.c | 14 +++++++++ arch/arm/mach-omap2/cpuidle34xx.c | 4 +-- arch/arm/mach-omap2/pm.c | 2 +- arch/arm/mach-omap2/pm24xx.c | 2 +- arch/arm/mach-omap2/pm34xx.c | 4 +-- 8 files changed, 79 insertions(+), 40 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index 3035eb9eec3..44664e7cc2a 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -178,7 +178,7 @@ static void _autodep_lookup(struct clkdm_autodep *autodep) * XXX autodeps are deprecated and should be removed at the earliest * opportunity */ -static void _clkdm_add_autodeps(struct clockdomain *clkdm) +void _clkdm_add_autodeps(struct clockdomain *clkdm) { struct clkdm_autodep *autodep; @@ -212,7 +212,7 @@ static void _clkdm_add_autodeps(struct clockdomain *clkdm) * XXX autodeps are deprecated and should be removed at the earliest * opportunity */ -static void _clkdm_del_autodeps(struct clockdomain *clkdm) +void _clkdm_del_autodeps(struct clockdomain *clkdm) { struct clkdm_autodep *autodep; @@ -357,7 +357,7 @@ void clkdm_init(struct clockdomain **clkdms, if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) clkdm_wakeup(clkdm); else if (clkdm->flags & CLKDM_CAN_DISABLE_AUTO) - omap2_clkdm_deny_idle(clkdm); + clkdm_deny_idle(clkdm); _resolve_clkdm_deps(clkdm, clkdm->wkdep_srcs); clkdm_clear_all_wkdeps(clkdm); @@ -821,7 +821,7 @@ int clkdm_wakeup(struct clockdomain *clkdm) } /** - * omap2_clkdm_allow_idle - enable hwsup idle transitions for clkdm + * clkdm_allow_idle - enable hwsup idle transitions for clkdm * @clkdm: struct clockdomain * * * Allow the hardware to automatically switch the clockdomain @clkdm into @@ -830,7 +830,7 @@ int clkdm_wakeup(struct clockdomain *clkdm) * framework, wkdep/sleepdep autodependencies are added; this is so * device drivers can read and write to the device. No return value. */ -void omap2_clkdm_allow_idle(struct clockdomain *clkdm) +void clkdm_allow_idle(struct clockdomain *clkdm) { if (!clkdm) return; @@ -841,27 +841,18 @@ void omap2_clkdm_allow_idle(struct clockdomain *clkdm) return; } + if (!arch_clkdm || !arch_clkdm->clkdm_allow_idle) + return; + pr_debug("clockdomain: enabling automatic idle transitions for %s\n", clkdm->name); - /* - * XXX This should be removed once TI adds wakeup/sleep - * dependency code and data for OMAP4. - */ - if (cpu_is_omap44xx()) { - pr_err("clockdomain: %s: OMAP4 wakeup/sleep dependency support: not yet implemented\n", clkdm->name); - } else { - if (atomic_read(&clkdm->usecount) > 0) - _clkdm_add_autodeps(clkdm); - } - - _enable_hwsup(clkdm); - + arch_clkdm->clkdm_allow_idle(clkdm); pwrdm_clkdm_state_switch(clkdm); } /** - * omap2_clkdm_deny_idle - disable hwsup idle transitions for clkdm + * clkdm_deny_idle - disable hwsup idle transitions for clkdm * @clkdm: struct clockdomain * * * Prevent the hardware from automatically switching the clockdomain @@ -869,7 +860,7 @@ void omap2_clkdm_allow_idle(struct clockdomain *clkdm) * downstream clocks enabled in the clock framework, wkdep/sleepdep * autodependencies are removed. No return value. */ -void omap2_clkdm_deny_idle(struct clockdomain *clkdm) +void clkdm_deny_idle(struct clockdomain *clkdm) { if (!clkdm) return; @@ -880,21 +871,13 @@ void omap2_clkdm_deny_idle(struct clockdomain *clkdm) return; } + if (!arch_clkdm || !arch_clkdm->clkdm_deny_idle) + return; + pr_debug("clockdomain: disabling automatic idle transitions for %s\n", clkdm->name); - _disable_hwsup(clkdm); - - /* - * XXX This should be removed once TI adds wakeup/sleep - * dependency code and data for OMAP4. - */ - if (cpu_is_omap44xx()) { - pr_err("clockdomain: %s: OMAP4 wakeup/sleep dependency support: not yet implemented\n", clkdm->name); - } else { - if (atomic_read(&clkdm->usecount) > 0) - _clkdm_del_autodeps(clkdm); - } + arch_clkdm->clkdm_deny_idle(clkdm); } diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index 7a5cb5cf994..7126658d9ae 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -167,8 +167,8 @@ int clkdm_del_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2); int clkdm_read_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2); int clkdm_clear_all_sleepdeps(struct clockdomain *clkdm); -void omap2_clkdm_allow_idle(struct clockdomain *clkdm); -void omap2_clkdm_deny_idle(struct clockdomain *clkdm); +void clkdm_allow_idle(struct clockdomain *clkdm); +void clkdm_deny_idle(struct clockdomain *clkdm); int clkdm_wakeup(struct clockdomain *clkdm); int clkdm_sleep(struct clockdomain *clkdm); @@ -179,6 +179,8 @@ int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk); extern void __init omap2xxx_clockdomains_init(void); extern void __init omap3xxx_clockdomains_init(void); extern void __init omap44xx_clockdomains_init(void); +extern void _clkdm_add_autodeps(struct clockdomain *clkdm); +extern void _clkdm_del_autodeps(struct clockdomain *clkdm); extern struct clkdm_ops omap2_clkdm_operations; extern struct clkdm_ops omap3_clkdm_operations; diff --git a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c index 08c87fe3da1..25c27a5c722 100644 --- a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c +++ b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c @@ -128,6 +128,24 @@ static int omap2_clkdm_wakeup(struct clockdomain *clkdm) return 0; } +static void omap2_clkdm_allow_idle(struct clockdomain *clkdm) +{ + if (atomic_read(&clkdm->usecount) > 0) + _clkdm_add_autodeps(clkdm); + + omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); +} + +static void omap2_clkdm_deny_idle(struct clockdomain *clkdm) +{ + omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + + if (atomic_read(&clkdm->usecount) > 0) + _clkdm_del_autodeps(clkdm); +} + static int omap3_clkdm_sleep(struct clockdomain *clkdm) { omap3xxx_cm_clkdm_force_sleep(clkdm->pwrdm.ptr->prcm_offs, @@ -142,6 +160,24 @@ static int omap3_clkdm_wakeup(struct clockdomain *clkdm) return 0; } +static void omap3_clkdm_allow_idle(struct clockdomain *clkdm) +{ + if (atomic_read(&clkdm->usecount) > 0) + _clkdm_add_autodeps(clkdm); + + omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); +} + +static void omap3_clkdm_deny_idle(struct clockdomain *clkdm) +{ + omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + + if (atomic_read(&clkdm->usecount) > 0) + _clkdm_del_autodeps(clkdm); +} + struct clkdm_ops omap2_clkdm_operations = { .clkdm_add_wkdep = omap2_clkdm_add_wkdep, .clkdm_del_wkdep = omap2_clkdm_del_wkdep, @@ -149,6 +185,8 @@ struct clkdm_ops omap2_clkdm_operations = { .clkdm_clear_all_wkdeps = omap2_clkdm_clear_all_wkdeps, .clkdm_sleep = omap2_clkdm_sleep, .clkdm_wakeup = omap2_clkdm_wakeup, + .clkdm_allow_idle = omap2_clkdm_allow_idle, + .clkdm_deny_idle = omap2_clkdm_deny_idle, }; struct clkdm_ops omap3_clkdm_operations = { @@ -162,4 +200,6 @@ struct clkdm_ops omap3_clkdm_operations = { .clkdm_clear_all_sleepdeps = omap3_clkdm_clear_all_sleepdeps, .clkdm_sleep = omap3_clkdm_sleep, .clkdm_wakeup = omap3_clkdm_wakeup, + .clkdm_allow_idle = omap3_clkdm_allow_idle, + .clkdm_deny_idle = omap3_clkdm_deny_idle, }; diff --git a/arch/arm/mach-omap2/clockdomain44xx.c b/arch/arm/mach-omap2/clockdomain44xx.c index 9ccb406cf54..a46125f1545 100644 --- a/arch/arm/mach-omap2/clockdomain44xx.c +++ b/arch/arm/mach-omap2/clockdomain44xx.c @@ -29,7 +29,21 @@ static int omap4_clkdm_wakeup(struct clockdomain *clkdm) return 0; } +static void omap4_clkdm_allow_idle(struct clockdomain *clkdm) +{ + omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition, + clkdm->cm_inst, clkdm->clkdm_offs); +} + +static void omap4_clkdm_deny_idle(struct clockdomain *clkdm) +{ + omap4_cminst_clkdm_disable_hwsup(clkdm->prcm_partition, + clkdm->cm_inst, clkdm->clkdm_offs); +} + struct clkdm_ops omap4_clkdm_operations = { .clkdm_sleep = omap4_clkdm_sleep, .clkdm_wakeup = omap4_clkdm_wakeup, + .clkdm_allow_idle = omap4_clkdm_allow_idle, + .clkdm_deny_idle = omap4_clkdm_deny_idle, }; diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index f7b22a16f38..7cc80715ef1 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -99,14 +99,14 @@ static int omap3_idle_bm_check(void) static int _cpuidle_allow_idle(struct powerdomain *pwrdm, struct clockdomain *clkdm) { - omap2_clkdm_allow_idle(clkdm); + clkdm_allow_idle(clkdm); return 0; } static int _cpuidle_deny_idle(struct powerdomain *pwrdm, struct clockdomain *clkdm) { - omap2_clkdm_deny_idle(clkdm); + clkdm_deny_idle(clkdm); return 0; } diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 74c31008079..7bb64d8121a 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -140,7 +140,7 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state) switch (sleep_switch) { case FORCEWAKEUP_SWITCH: if (pwrdm->pwrdm_clkdms[0]->flags & CLKDM_CAN_ENABLE_AUTO) - omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]); + clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]); else clkdm_sleep(pwrdm->pwrdm_clkdms[0]); break; diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index 4125621bf59..e983c8301f5 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -367,7 +367,7 @@ static int __init clkdms_setup(struct clockdomain *clkdm, void *unused) clkdm_clear_all_sleepdeps(clkdm); if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO) - omap2_clkdm_allow_idle(clkdm); + clkdm_allow_idle(clkdm); else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP && atomic_read(&clkdm->usecount) == 0) clkdm_sleep(clkdm); diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 81df2b169a5..eda9a4e99a8 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -496,7 +496,7 @@ console_still_active: pwrdm_post_transition(); - omap2_clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]); + clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]); } int omap3_can_sleep(void) @@ -990,7 +990,7 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused) static int __init clkdms_setup(struct clockdomain *clkdm, void *unused) { if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO) - omap2_clkdm_allow_idle(clkdm); + clkdm_allow_idle(clkdm); else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP && atomic_read(&clkdm->usecount) == 0) clkdm_sleep(clkdm); -- cgit v1.2.3-18-g5258 From 4da71ae607fc657075286abd2774041ff4d00fe5 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Fri, 25 Feb 2011 16:06:48 -0700 Subject: OMAP: clockdomain: Arch specific funcs for clkdm_clk_enable/disable Define the following architecture specific funtions for omap2/3/4 .clkdm_clk_enable .clkdm_clk_disable Convert the platform-independent framework to call these functions. Also rename the api's by removing the omap2_ preamble. Hence call omap2_clkdm_k_enable as clkdm_clk_enable and omap2_clkdm_clk_disable as clkdm_clk_disable.a Remove unused functions (_enable/_disable_hwsup) and unsed headers from clockdomain.c file. Signed-off-by: Rajendra Nayak Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clock.c | 6 +- arch/arm/mach-omap2/clockdomain.c | 131 +++-------------------------- arch/arm/mach-omap2/clockdomain.h | 4 +- arch/arm/mach-omap2/clockdomain2xxx_3xxx.c | 69 +++++++++++++++ arch/arm/mach-omap2/clockdomain44xx.c | 28 ++++++ 5 files changed, 114 insertions(+), 124 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 2a2f15213ad..e9625fcf639 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -264,7 +264,7 @@ void omap2_clk_disable(struct clk *clk) clk->ops->disable(clk); if (clk->clkdm) - omap2_clkdm_clk_disable(clk->clkdm, clk); + clkdm_clk_disable(clk->clkdm, clk); if (clk->parent) omap2_clk_disable(clk->parent); @@ -304,7 +304,7 @@ int omap2_clk_enable(struct clk *clk) } if (clk->clkdm) { - ret = omap2_clkdm_clk_enable(clk->clkdm, clk); + ret = clkdm_clk_enable(clk->clkdm, clk); if (ret) { WARN(1, "clock: %s: could not enable clockdomain %s: " "%d\n", clk->name, clk->clkdm->name, ret); @@ -322,7 +322,7 @@ int omap2_clk_enable(struct clk *clk) oce_err3: if (clk->clkdm) - omap2_clkdm_clk_disable(clk->clkdm, clk); + clkdm_clk_disable(clk->clkdm, clk); oce_err2: if (clk->parent) omap2_clk_disable(clk->parent); diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index 44664e7cc2a..70d242007e0 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -26,17 +26,8 @@ #include -#include "prm2xxx_3xxx.h" -#include "prm-regbits-24xx.h" -#include "cm2xxx_3xxx.h" -#include "cm-regbits-24xx.h" -#include "cminst44xx.h" -#include "prcm44xx.h" - #include -#include "powerdomain.h" #include "clockdomain.h" -#include /* clkdm_list contains all registered struct clockdomains */ static LIST_HEAD(clkdm_list); @@ -235,58 +226,6 @@ void _clkdm_del_autodeps(struct clockdomain *clkdm) } } -/** - * _enable_hwsup - place a clockdomain into hardware-supervised idle - * @clkdm: struct clockdomain * - * - * Place the clockdomain into hardware-supervised idle mode. No return - * value. - * - * XXX Should this return an error if the clockdomain does not support - * hardware-supervised idle mode? - */ -static void _enable_hwsup(struct clockdomain *clkdm) -{ - if (cpu_is_omap24xx()) - omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); - else if (cpu_is_omap34xx()) - omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); - else if (cpu_is_omap44xx()) - return omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition, - clkdm->cm_inst, - clkdm->clkdm_offs); - else - BUG(); -} - -/** - * _disable_hwsup - place a clockdomain into software-supervised idle - * @clkdm: struct clockdomain * - * - * Place the clockdomain @clkdm into software-supervised idle mode. - * No return value. - * - * XXX Should this return an error if the clockdomain does not support - * software-supervised idle mode? - */ -static void _disable_hwsup(struct clockdomain *clkdm) -{ - if (cpu_is_omap24xx()) - omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); - else if (cpu_is_omap34xx()) - omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); - else if (cpu_is_omap44xx()) - return omap4_cminst_clkdm_disable_hwsup(clkdm->prcm_partition, - clkdm->cm_inst, - clkdm->clkdm_offs); - else - BUG(); -} - /** * _resolve_clkdm_deps() - resolve clkdm_names in @clkdm_deps to clkdms * @clkdm: clockdomain that we are resolving dependencies for @@ -884,7 +823,7 @@ void clkdm_deny_idle(struct clockdomain *clkdm) /* Clockdomain-to-clock framework interface code */ /** - * omap2_clkdm_clk_enable - add an enabled downstream clock to this clkdm + * clkdm_clk_enable - add an enabled downstream clock to this clkdm * @clkdm: struct clockdomain * * @clk: struct clk * of the enabled downstream clock * @@ -897,10 +836,8 @@ void clkdm_deny_idle(struct clockdomain *clkdm) * by on-chip processors. Returns -EINVAL if passed null pointers; * returns 0 upon success or if the clockdomain is in hwsup idle mode. */ -int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk) +int clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk) { - bool hwsup = false; - /* * XXX Rewrite this code to maintain a list of enabled * downstream clocks for debugging purposes? @@ -909,6 +846,9 @@ int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk) if (!clkdm || !clk) return -EINVAL; + if (!arch_clkdm || !arch_clkdm->clkdm_clk_enable) + return -EINVAL; + if (atomic_inc_return(&clkdm->usecount) > 1) return 0; @@ -917,31 +857,7 @@ int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk) pr_debug("clockdomain: clkdm %s: clk %s now enabled\n", clkdm->name, clk->name); - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - - if (!clkdm->clktrctrl_mask) - return 0; - - hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); - - } else if (cpu_is_omap44xx()) { - - hwsup = omap4_cminst_is_clkdm_in_hwsup(clkdm->prcm_partition, - clkdm->cm_inst, - clkdm->clkdm_offs); - - } - - if (hwsup) { - /* Disable HW transitions when we are changing deps */ - _disable_hwsup(clkdm); - _clkdm_add_autodeps(clkdm); - _enable_hwsup(clkdm); - } else { - clkdm_wakeup(clkdm); - } - + arch_clkdm->clkdm_clk_enable(clkdm); pwrdm_wait_transition(clkdm->pwrdm.ptr); pwrdm_clkdm_state_switch(clkdm); @@ -949,7 +865,7 @@ int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk) } /** - * omap2_clkdm_clk_disable - remove an enabled downstream clock from this clkdm + * clkdm_clk_disable - remove an enabled downstream clock from this clkdm * @clkdm: struct clockdomain * * @clk: struct clk * of the disabled downstream clock * @@ -962,10 +878,8 @@ int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk) * is enabled; or returns 0 upon success or if the clockdomain is in * hwsup idle mode. */ -int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk) +int clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk) { - bool hwsup = false; - /* * XXX Rewrite this code to maintain a list of enabled * downstream clocks for debugging purposes? @@ -974,6 +888,9 @@ int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk) if (!clkdm || !clk) return -EINVAL; + if (!arch_clkdm || !arch_clkdm->clkdm_clk_disable) + return -EINVAL; + #ifdef DEBUG if (atomic_read(&clkdm->usecount) == 0) { WARN_ON(1); /* underflow */ @@ -989,31 +906,7 @@ int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk) pr_debug("clockdomain: clkdm %s: clk %s now disabled\n", clkdm->name, clk->name); - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - - if (!clkdm->clktrctrl_mask) - return 0; - - hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); - - } else if (cpu_is_omap44xx()) { - - hwsup = omap4_cminst_is_clkdm_in_hwsup(clkdm->prcm_partition, - clkdm->cm_inst, - clkdm->clkdm_offs); - - } - - if (hwsup) { - /* Disable HW transitions when we are changing deps */ - _disable_hwsup(clkdm); - _clkdm_del_autodeps(clkdm); - _enable_hwsup(clkdm); - } else { - clkdm_sleep(clkdm); - } - + arch_clkdm->clkdm_clk_disable(clkdm); pwrdm_clkdm_state_switch(clkdm); return 0; diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index 7126658d9ae..de52f059f9e 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -173,8 +173,8 @@ void clkdm_deny_idle(struct clockdomain *clkdm); int clkdm_wakeup(struct clockdomain *clkdm); int clkdm_sleep(struct clockdomain *clkdm); -int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk); -int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk); +int clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk); +int clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk); extern void __init omap2xxx_clockdomains_init(void); extern void __init omap3xxx_clockdomains_init(void); diff --git a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c index 25c27a5c722..48d0db7e606 100644 --- a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c +++ b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c @@ -146,6 +146,71 @@ static void omap2_clkdm_deny_idle(struct clockdomain *clkdm) _clkdm_del_autodeps(clkdm); } +static void _enable_hwsup(struct clockdomain *clkdm) +{ + if (cpu_is_omap24xx()) + omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + else if (cpu_is_omap34xx()) + omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); +} + +static void _disable_hwsup(struct clockdomain *clkdm) +{ + if (cpu_is_omap24xx()) + omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + else if (cpu_is_omap34xx()) + omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); +} + + +static int omap2_clkdm_clk_enable(struct clockdomain *clkdm) +{ + bool hwsup = false; + + if (!clkdm->clktrctrl_mask) + return 0; + + hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + + if (hwsup) { + /* Disable HW transitions when we are changing deps */ + _disable_hwsup(clkdm); + _clkdm_add_autodeps(clkdm); + _enable_hwsup(clkdm); + } else { + clkdm_wakeup(clkdm); + } + + return 0; +} + +static int omap2_clkdm_clk_disable(struct clockdomain *clkdm) +{ + bool hwsup = false; + + if (!clkdm->clktrctrl_mask) + return 0; + + hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + + if (hwsup) { + /* Disable HW transitions when we are changing deps */ + _disable_hwsup(clkdm); + _clkdm_del_autodeps(clkdm); + _enable_hwsup(clkdm); + } else { + clkdm_sleep(clkdm); + } + + return 0; +} + static int omap3_clkdm_sleep(struct clockdomain *clkdm) { omap3xxx_cm_clkdm_force_sleep(clkdm->pwrdm.ptr->prcm_offs, @@ -187,6 +252,8 @@ struct clkdm_ops omap2_clkdm_operations = { .clkdm_wakeup = omap2_clkdm_wakeup, .clkdm_allow_idle = omap2_clkdm_allow_idle, .clkdm_deny_idle = omap2_clkdm_deny_idle, + .clkdm_clk_enable = omap2_clkdm_clk_enable, + .clkdm_clk_disable = omap2_clkdm_clk_disable, }; struct clkdm_ops omap3_clkdm_operations = { @@ -202,4 +269,6 @@ struct clkdm_ops omap3_clkdm_operations = { .clkdm_wakeup = omap3_clkdm_wakeup, .clkdm_allow_idle = omap3_clkdm_allow_idle, .clkdm_deny_idle = omap3_clkdm_deny_idle, + .clkdm_clk_enable = omap2_clkdm_clk_enable, + .clkdm_clk_disable = omap2_clkdm_clk_disable, }; diff --git a/arch/arm/mach-omap2/clockdomain44xx.c b/arch/arm/mach-omap2/clockdomain44xx.c index a46125f1545..c0ccc470164 100644 --- a/arch/arm/mach-omap2/clockdomain44xx.c +++ b/arch/arm/mach-omap2/clockdomain44xx.c @@ -41,9 +41,37 @@ static void omap4_clkdm_deny_idle(struct clockdomain *clkdm) clkdm->cm_inst, clkdm->clkdm_offs); } +static int omap4_clkdm_clk_enable(struct clockdomain *clkdm) +{ + bool hwsup = false; + + hwsup = omap4_cminst_is_clkdm_in_hwsup(clkdm->prcm_partition, + clkdm->cm_inst, clkdm->clkdm_offs); + + if (!hwsup) + clkdm_wakeup(clkdm); + + return 0; +} + +static int omap4_clkdm_clk_disable(struct clockdomain *clkdm) +{ + bool hwsup = false; + + hwsup = omap4_cminst_is_clkdm_in_hwsup(clkdm->prcm_partition, + clkdm->cm_inst, clkdm->clkdm_offs); + + if (!hwsup) + clkdm_sleep(clkdm); + + return 0; +} + struct clkdm_ops omap4_clkdm_operations = { .clkdm_sleep = omap4_clkdm_sleep, .clkdm_wakeup = omap4_clkdm_wakeup, .clkdm_allow_idle = omap4_clkdm_allow_idle, .clkdm_deny_idle = omap4_clkdm_deny_idle, + .clkdm_clk_enable = omap4_clkdm_clk_enable, + .clkdm_clk_disable = omap4_clkdm_clk_disable, }; -- cgit v1.2.3-18-g5258 From 514c5948b2b5a3f9f9ebc344fc03073f3bd481b4 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Fri, 25 Feb 2011 15:48:13 -0700 Subject: OMAP4: clockdomain: Add clkdm static dependency srcs OMAP4 supports static dependencies and dynamic dependencies between clock domains. Static dependencies imply both wakeup as well as sleep dependencies. Generate all clockdomain static dependency sources. (Dynamic dependency sources are hardwired and cannot to controlled from software). The autogen scripts are updated to generate the contents of this patch. Signed-off-by: Rajendra Nayak Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clockdomains44xx_data.c | 390 +++++++++++++++++++++++++++- 1 file changed, 385 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c index eea6f8e4028..f53258acd1d 100644 --- a/arch/arm/mach-omap2/clockdomains44xx_data.c +++ b/arch/arm/mach-omap2/clockdomains44xx_data.c @@ -18,11 +18,6 @@ * published by the Free Software Foundation. */ -/* - * To-Do List - * -> Populate the Sleep/Wakeup dependencies for the domains - */ - #include #include @@ -35,6 +30,355 @@ #include "prcm44xx.h" #include "prcm_mpu44xx.h" +/* Static Dependencies for OMAP4 Clock Domains */ + +static struct clkdm_dep ducati_wkup_sleep_deps[] = { + { + .clkdm_name = "abe_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "ivahd_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l3_1_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l3_2_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l3_dss_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l3_emif_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l3_gfx_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l3_init_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l4_cfg_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l4_per_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l4_secure_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l4_wkup_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "tesla_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { NULL }, +}; + +static struct clkdm_dep iss_wkup_sleep_deps[] = { + { + .clkdm_name = "ivahd_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l3_1_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l3_emif_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { NULL }, +}; + +static struct clkdm_dep ivahd_wkup_sleep_deps[] = { + { + .clkdm_name = "l3_1_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l3_emif_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { NULL }, +}; + +static struct clkdm_dep l3_d2d_wkup_sleep_deps[] = { + { + .clkdm_name = "abe_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "ivahd_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l3_1_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l3_2_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l3_emif_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l3_init_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l4_cfg_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l4_per_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { NULL }, +}; + +static struct clkdm_dep l3_dma_wkup_sleep_deps[] = { + { + .clkdm_name = "abe_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "ducati_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "ivahd_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l3_1_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l3_dss_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l3_emif_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l3_init_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l4_cfg_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l4_per_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l4_secure_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l4_wkup_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { NULL }, +}; + +static struct clkdm_dep l3_dss_wkup_sleep_deps[] = { + { + .clkdm_name = "ivahd_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l3_2_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l3_emif_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { NULL }, +}; + +static struct clkdm_dep l3_gfx_wkup_sleep_deps[] = { + { + .clkdm_name = "ivahd_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l3_1_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l3_emif_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { NULL }, +}; + +static struct clkdm_dep l3_init_wkup_sleep_deps[] = { + { + .clkdm_name = "abe_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "ivahd_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l3_emif_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l4_cfg_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l4_per_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l4_secure_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l4_wkup_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { NULL }, +}; + +static struct clkdm_dep l4_secure_wkup_sleep_deps[] = { + { + .clkdm_name = "l3_1_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l3_emif_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l4_per_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { NULL }, +}; + +static struct clkdm_dep mpuss_wkup_sleep_deps[] = { + { + .clkdm_name = "abe_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "ducati_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "ivahd_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l3_1_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l3_2_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l3_dss_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l3_emif_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l3_gfx_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l3_init_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l4_cfg_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l4_per_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l4_secure_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l4_wkup_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "tesla_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { NULL }, +}; + +static struct clkdm_dep tesla_wkup_sleep_deps[] = { + { + .clkdm_name = "abe_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "ivahd_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l3_1_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l3_2_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l3_emif_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l3_init_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l4_cfg_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l4_per_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { + .clkdm_name = "l4_wkup_clkdm", + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) + }, + { NULL }, +}; static struct clockdomain l4_cefuse_44xx_clkdm = { .name = "l4_cefuse_clkdm", @@ -52,6 +396,7 @@ static struct clockdomain l4_cfg_44xx_clkdm = { .prcm_partition = OMAP4430_CM2_PARTITION, .cm_inst = OMAP4430_CM2_CORE_INST, .clkdm_offs = OMAP4430_CM2_CORE_L4CFG_CDOFFS, + .dep_bit = OMAP4430_L4CFG_STATDEP_SHIFT, .flags = CLKDM_CAN_HWSUP, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; @@ -62,6 +407,9 @@ static struct clockdomain tesla_44xx_clkdm = { .prcm_partition = OMAP4430_CM1_PARTITION, .cm_inst = OMAP4430_CM1_TESLA_INST, .clkdm_offs = OMAP4430_CM1_TESLA_TESLA_CDOFFS, + .dep_bit = OMAP4430_TESLA_STATDEP_SHIFT, + .wkdep_srcs = tesla_wkup_sleep_deps, + .sleepdep_srcs = tesla_wkup_sleep_deps, .flags = CLKDM_CAN_HWSUP_SWSUP, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; @@ -72,6 +420,9 @@ static struct clockdomain l3_gfx_44xx_clkdm = { .prcm_partition = OMAP4430_CM2_PARTITION, .cm_inst = OMAP4430_CM2_GFX_INST, .clkdm_offs = OMAP4430_CM2_GFX_GFX_CDOFFS, + .dep_bit = OMAP4430_GFX_STATDEP_SHIFT, + .wkdep_srcs = l3_gfx_wkup_sleep_deps, + .sleepdep_srcs = l3_gfx_wkup_sleep_deps, .flags = CLKDM_CAN_HWSUP_SWSUP, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; @@ -82,6 +433,9 @@ static struct clockdomain ivahd_44xx_clkdm = { .prcm_partition = OMAP4430_CM2_PARTITION, .cm_inst = OMAP4430_CM2_IVAHD_INST, .clkdm_offs = OMAP4430_CM2_IVAHD_IVAHD_CDOFFS, + .dep_bit = OMAP4430_IVAHD_STATDEP_SHIFT, + .wkdep_srcs = ivahd_wkup_sleep_deps, + .sleepdep_srcs = ivahd_wkup_sleep_deps, .flags = CLKDM_CAN_HWSUP_SWSUP, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; @@ -92,6 +446,9 @@ static struct clockdomain l4_secure_44xx_clkdm = { .prcm_partition = OMAP4430_CM2_PARTITION, .cm_inst = OMAP4430_CM2_L4PER_INST, .clkdm_offs = OMAP4430_CM2_L4PER_L4SEC_CDOFFS, + .dep_bit = OMAP4430_L4SEC_STATDEP_SHIFT, + .wkdep_srcs = l4_secure_wkup_sleep_deps, + .sleepdep_srcs = l4_secure_wkup_sleep_deps, .flags = CLKDM_CAN_HWSUP_SWSUP, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; @@ -102,6 +459,7 @@ static struct clockdomain l4_per_44xx_clkdm = { .prcm_partition = OMAP4430_CM2_PARTITION, .cm_inst = OMAP4430_CM2_L4PER_INST, .clkdm_offs = OMAP4430_CM2_L4PER_L4PER_CDOFFS, + .dep_bit = OMAP4430_L4PER_STATDEP_SHIFT, .flags = CLKDM_CAN_HWSUP_SWSUP, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; @@ -112,6 +470,7 @@ static struct clockdomain abe_44xx_clkdm = { .prcm_partition = OMAP4430_CM1_PARTITION, .cm_inst = OMAP4430_CM1_ABE_INST, .clkdm_offs = OMAP4430_CM1_ABE_ABE_CDOFFS, + .dep_bit = OMAP4430_ABE_STATDEP_SHIFT, .flags = CLKDM_CAN_HWSUP_SWSUP, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; @@ -131,6 +490,9 @@ static struct clockdomain l3_init_44xx_clkdm = { .prcm_partition = OMAP4430_CM2_PARTITION, .cm_inst = OMAP4430_CM2_L3INIT_INST, .clkdm_offs = OMAP4430_CM2_L3INIT_L3INIT_CDOFFS, + .dep_bit = OMAP4430_L3INIT_STATDEP_SHIFT, + .wkdep_srcs = l3_init_wkup_sleep_deps, + .sleepdep_srcs = l3_init_wkup_sleep_deps, .flags = CLKDM_CAN_HWSUP_SWSUP, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; @@ -141,6 +503,8 @@ static struct clockdomain mpuss_44xx_clkdm = { .prcm_partition = OMAP4430_CM1_PARTITION, .cm_inst = OMAP4430_CM1_MPU_INST, .clkdm_offs = OMAP4430_CM1_MPU_MPU_CDOFFS, + .wkdep_srcs = mpuss_wkup_sleep_deps, + .sleepdep_srcs = mpuss_wkup_sleep_deps, .flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; @@ -171,6 +535,7 @@ static struct clockdomain l3_emif_44xx_clkdm = { .prcm_partition = OMAP4430_CM2_PARTITION, .cm_inst = OMAP4430_CM2_CORE_INST, .clkdm_offs = OMAP4430_CM2_CORE_MEMIF_CDOFFS, + .dep_bit = OMAP4430_MEMIF_STATDEP_SHIFT, .flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; @@ -191,6 +556,9 @@ static struct clockdomain ducati_44xx_clkdm = { .prcm_partition = OMAP4430_CM2_PARTITION, .cm_inst = OMAP4430_CM2_CORE_INST, .clkdm_offs = OMAP4430_CM2_CORE_DUCATI_CDOFFS, + .dep_bit = OMAP4430_DUCATI_STATDEP_SHIFT, + .wkdep_srcs = ducati_wkup_sleep_deps, + .sleepdep_srcs = ducati_wkup_sleep_deps, .flags = CLKDM_CAN_HWSUP_SWSUP, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; @@ -201,6 +569,7 @@ static struct clockdomain l3_2_44xx_clkdm = { .prcm_partition = OMAP4430_CM2_PARTITION, .cm_inst = OMAP4430_CM2_CORE_INST, .clkdm_offs = OMAP4430_CM2_CORE_L3_2_CDOFFS, + .dep_bit = OMAP4430_L3_2_STATDEP_SHIFT, .flags = CLKDM_CAN_HWSUP, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; @@ -211,6 +580,7 @@ static struct clockdomain l3_1_44xx_clkdm = { .prcm_partition = OMAP4430_CM2_PARTITION, .cm_inst = OMAP4430_CM2_CORE_INST, .clkdm_offs = OMAP4430_CM2_CORE_L3_1_CDOFFS, + .dep_bit = OMAP4430_L3_1_STATDEP_SHIFT, .flags = CLKDM_CAN_HWSUP, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; @@ -221,6 +591,8 @@ static struct clockdomain l3_d2d_44xx_clkdm = { .prcm_partition = OMAP4430_CM2_PARTITION, .cm_inst = OMAP4430_CM2_CORE_INST, .clkdm_offs = OMAP4430_CM2_CORE_D2D_CDOFFS, + .wkdep_srcs = l3_d2d_wkup_sleep_deps, + .sleepdep_srcs = l3_d2d_wkup_sleep_deps, .flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; @@ -231,6 +603,8 @@ static struct clockdomain iss_44xx_clkdm = { .prcm_partition = OMAP4430_CM2_PARTITION, .cm_inst = OMAP4430_CM2_CAM_INST, .clkdm_offs = OMAP4430_CM2_CAM_CAM_CDOFFS, + .wkdep_srcs = iss_wkup_sleep_deps, + .sleepdep_srcs = iss_wkup_sleep_deps, .flags = CLKDM_CAN_HWSUP_SWSUP, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; @@ -241,6 +615,9 @@ static struct clockdomain l3_dss_44xx_clkdm = { .prcm_partition = OMAP4430_CM2_PARTITION, .cm_inst = OMAP4430_CM2_DSS_INST, .clkdm_offs = OMAP4430_CM2_DSS_DSS_CDOFFS, + .dep_bit = OMAP4430_DSS_STATDEP_SHIFT, + .wkdep_srcs = l3_dss_wkup_sleep_deps, + .sleepdep_srcs = l3_dss_wkup_sleep_deps, .flags = CLKDM_CAN_HWSUP_SWSUP, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; @@ -251,6 +628,7 @@ static struct clockdomain l4_wkup_44xx_clkdm = { .prcm_partition = OMAP4430_PRM_PARTITION, .cm_inst = OMAP4430_PRM_WKUP_CM_INST, .clkdm_offs = OMAP4430_PRM_WKUP_CM_WKUP_CDOFFS, + .dep_bit = OMAP4430_L4WKUP_STATDEP_SHIFT, .flags = CLKDM_CAN_HWSUP, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; @@ -271,6 +649,8 @@ static struct clockdomain l3_dma_44xx_clkdm = { .prcm_partition = OMAP4430_CM2_PARTITION, .cm_inst = OMAP4430_CM2_CORE_INST, .clkdm_offs = OMAP4430_CM2_CORE_SDMA_CDOFFS, + .wkdep_srcs = l3_dma_wkup_sleep_deps, + .sleepdep_srcs = l3_dma_wkup_sleep_deps, .flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; -- cgit v1.2.3-18-g5258 From 04eb7773d803bd0a8249c5bba37f81c496253ea1 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Fri, 25 Feb 2011 15:48:14 -0700 Subject: OMAP4: CM: Add CM accesor api for bitwise control Add new OMAP4 CM accesor apis to set/clear and read bitfields (based on mask) from CM registers. Signed-off-by: Rajendra Nayak Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/cminst44xx.c | 21 +++++++++++++++++++++ arch/arm/mach-omap2/cminst44xx.h | 6 ++++++ 2 files changed, 27 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c index c04bbbea17a..a482bfa0a95 100644 --- a/arch/arm/mach-omap2/cminst44xx.c +++ b/arch/arm/mach-omap2/cminst44xx.c @@ -73,6 +73,27 @@ u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, s16 inst, return v; } +u32 omap4_cminst_set_inst_reg_bits(u32 bits, u8 part, s16 inst, s16 idx) +{ + return omap4_cminst_rmw_inst_reg_bits(bits, bits, part, inst, idx); +} + +u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, s16 inst, s16 idx) +{ + return omap4_cminst_rmw_inst_reg_bits(bits, 0x0, part, inst, idx); +} + +u32 omap4_cminst_read_inst_reg_bits(u8 part, u16 inst, s16 idx, u32 mask) +{ + u32 v; + + v = omap4_cminst_read_inst_reg(part, inst, idx); + v &= mask; + v >>= __ffs(mask); + + return v; +} + /* * */ diff --git a/arch/arm/mach-omap2/cminst44xx.h b/arch/arm/mach-omap2/cminst44xx.h index a6abd0a8cb8..2b32c181a2e 100644 --- a/arch/arm/mach-omap2/cminst44xx.h +++ b/arch/arm/mach-omap2/cminst44xx.h @@ -25,6 +25,12 @@ extern u32 omap4_cminst_read_inst_reg(u8 part, s16 inst, u16 idx); extern void omap4_cminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx); extern u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, s16 inst, s16 idx); +extern u32 omap4_cminst_set_inst_reg_bits(u32 bits, u8 part, s16 inst, + s16 idx); +extern u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, s16 inst, + s16 idx); +extern u32 omap4_cminst_read_inst_reg_bits(u8 part, u16 inst, s16 idx, + u32 mask); extern int omap4_cm_wait_module_ready(void __iomem *clkctrl_reg); -- cgit v1.2.3-18-g5258 From 15b08d930f0b1a65a20e042046bd99ed7f75556b Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Fri, 25 Feb 2011 15:48:14 -0700 Subject: OMAP4: clockdomain: Add wkup/sleep dependency support Add OMAP4 platform specific implementation to support clkdm wkup and sleep dependencies a.k.a static dependencies. Signed-off-by: Rajendra Nayak [paul@pwsan.com: removed comment about PRM; zero-prefixed STATICDEP register offset; fixed loop termination condition in omap4_clkdm_clear_all_wkup_sleep_deps(); thanks to Kevin Hilman for finding and helping fix this bug] Cc: Kevin Hilman Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clockdomain44xx.c | 60 +++++++++++++++++++++++++++++++++++ arch/arm/mach-omap2/cm44xx.h | 1 + 2 files changed, 61 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clockdomain44xx.c b/arch/arm/mach-omap2/clockdomain44xx.c index c0ccc470164..a1a4ecd2654 100644 --- a/arch/arm/mach-omap2/clockdomain44xx.c +++ b/arch/arm/mach-omap2/clockdomain44xx.c @@ -12,8 +12,60 @@ * published by the Free Software Foundation. */ +#include #include "clockdomain.h" #include "cminst44xx.h" +#include "cm44xx.h" + +static int omap4_clkdm_add_wkup_sleep_dep(struct clockdomain *clkdm1, + struct clockdomain *clkdm2) +{ + omap4_cminst_set_inst_reg_bits((1 << clkdm2->dep_bit), + clkdm1->prcm_partition, + clkdm1->cm_inst, clkdm1->clkdm_offs + + OMAP4_CM_STATICDEP); + return 0; +} + +static int omap4_clkdm_del_wkup_sleep_dep(struct clockdomain *clkdm1, + struct clockdomain *clkdm2) +{ + omap4_cminst_clear_inst_reg_bits((1 << clkdm2->dep_bit), + clkdm1->prcm_partition, + clkdm1->cm_inst, clkdm1->clkdm_offs + + OMAP4_CM_STATICDEP); + return 0; +} + +static int omap4_clkdm_read_wkup_sleep_dep(struct clockdomain *clkdm1, + struct clockdomain *clkdm2) +{ + return omap4_cminst_read_inst_reg_bits(clkdm1->prcm_partition, + clkdm1->cm_inst, clkdm1->clkdm_offs + + OMAP4_CM_STATICDEP, + (1 << clkdm2->dep_bit)); +} + +static int omap4_clkdm_clear_all_wkup_sleep_deps(struct clockdomain *clkdm) +{ + struct clkdm_dep *cd; + u32 mask = 0; + + for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) { + if (!omap_chip_is(cd->omap_chip)) + continue; + if (!cd->clkdm) + continue; /* only happens if data is erroneous */ + + mask |= 1 << cd->clkdm->dep_bit; + atomic_set(&cd->wkdep_usecount, 0); + } + + omap4_cminst_clear_inst_reg_bits(mask, clkdm->prcm_partition, + clkdm->cm_inst, clkdm->clkdm_offs + + OMAP4_CM_STATICDEP); + return 0; +} static int omap4_clkdm_sleep(struct clockdomain *clkdm) { @@ -68,6 +120,14 @@ static int omap4_clkdm_clk_disable(struct clockdomain *clkdm) } struct clkdm_ops omap4_clkdm_operations = { + .clkdm_add_wkdep = omap4_clkdm_add_wkup_sleep_dep, + .clkdm_del_wkdep = omap4_clkdm_del_wkup_sleep_dep, + .clkdm_read_wkdep = omap4_clkdm_read_wkup_sleep_dep, + .clkdm_clear_all_wkdeps = omap4_clkdm_clear_all_wkup_sleep_deps, + .clkdm_add_sleepdep = omap4_clkdm_add_wkup_sleep_dep, + .clkdm_del_sleepdep = omap4_clkdm_del_wkup_sleep_dep, + .clkdm_read_sleepdep = omap4_clkdm_read_wkup_sleep_dep, + .clkdm_clear_all_sleepdeps = omap4_clkdm_clear_all_wkup_sleep_deps, .clkdm_sleep = omap4_clkdm_sleep, .clkdm_wakeup = omap4_clkdm_wakeup, .clkdm_allow_idle = omap4_clkdm_allow_idle, diff --git a/arch/arm/mach-omap2/cm44xx.h b/arch/arm/mach-omap2/cm44xx.h index 48fc3f426fb..0b87ec82b41 100644 --- a/arch/arm/mach-omap2/cm44xx.h +++ b/arch/arm/mach-omap2/cm44xx.h @@ -21,6 +21,7 @@ #include "cm.h" #define OMAP4_CM_CLKSTCTRL 0x0000 +#define OMAP4_CM_STATICDEP 0x0004 /* Function prototypes */ # ifndef __ASSEMBLER__ -- cgit v1.2.3-18-g5258 From 5f8662ba3da6e410eb771b5d8751a1e02d87513f Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Fri, 25 Feb 2011 15:48:14 -0700 Subject: OMAP4: clockdomain: Remove pr_errs' stating unsupported wkdep Now that wkup and sleep dependencies are supported (in the form of static deps) for OMAP4, remove all instances of pr_errs' stating dependencies are still unsupported on OMAP4. Signed-off-by: Rajendra Nayak Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clockdomain.c | 24 ------------------------ 1 file changed, 24 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index 70d242007e0..a0341dee1c3 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -400,12 +400,6 @@ int clkdm_add_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) struct clkdm_dep *cd; int ret = 0; - if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) { - pr_err("clockdomain: %s/%s: %s: not yet implemented\n", - clkdm1->name, clkdm2->name, __func__); - return -EINVAL; - } - if (!clkdm1 || !clkdm2) return -EINVAL; @@ -447,12 +441,6 @@ int clkdm_del_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) struct clkdm_dep *cd; int ret = 0; - if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) { - pr_err("clockdomain: %s/%s: %s: not yet implemented\n", - clkdm1->name, clkdm2->name, __func__); - return -EINVAL; - } - if (!clkdm1 || !clkdm2) return -EINVAL; @@ -501,12 +489,6 @@ int clkdm_read_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) if (!clkdm1 || !clkdm2) return -EINVAL; - if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) { - pr_err("clockdomain: %s/%s: %s: not yet implemented\n", - clkdm1->name, clkdm2->name, __func__); - return -EINVAL; - } - cd = _clkdm_deps_lookup(clkdm2, clkdm1->wkdep_srcs); if (IS_ERR(cd)) ret = PTR_ERR(cd); @@ -536,12 +518,6 @@ int clkdm_read_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) */ int clkdm_clear_all_wkdeps(struct clockdomain *clkdm) { - if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) { - pr_err("clockdomain: %s: %s: not yet implemented\n", - clkdm->name, __func__); - return -EINVAL; - } - if (!clkdm) return -EINVAL; -- cgit v1.2.3-18-g5258 From 6c52f32dcf1d76a95bda3a12d6be9a3102a2693c Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Fri, 25 Feb 2011 15:48:36 -0700 Subject: omap: clock: Check for enable/disable ops support Check if enable/disable operations are supported for a given clock node before attempting to call them. Signed-off-by: Rajendra Nayak Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clock.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index e9625fcf639..b1875965bb5 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -261,7 +261,8 @@ void omap2_clk_disable(struct clk *clk) pr_debug("clock: %s: disabling in hardware\n", clk->name); - clk->ops->disable(clk); + if (clk->ops && clk->ops->disable) + clk->ops->disable(clk); if (clk->clkdm) clkdm_clk_disable(clk->clkdm, clk); @@ -312,10 +313,13 @@ int omap2_clk_enable(struct clk *clk) } } - ret = clk->ops->enable(clk); - if (ret) { - WARN(1, "clock: %s: could not enable: %d\n", clk->name, ret); - goto oce_err3; + if (clk->ops && clk->ops->enable) { + ret = clk->ops->enable(clk); + if (ret) { + WARN(1, "clock: %s: could not enable: %d\n", + clk->name, ret); + goto oce_err3; + } } return 0; -- cgit v1.2.3-18-g5258 From 5a2926b8805bc697d47a243dbf2f20de68abe14c Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Fri, 25 Feb 2011 15:48:37 -0700 Subject: omap3: dpll: Populate clkops for dpll1_ck DPLL1 on omap3 is very similar to the rest of the non-core dpll's. Hence populate clkops_omap3_noncore_dpll_ops as the clkops for it, instead of the currently populated clkops_null. Signed-off-by: Rajendra Nayak Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clock3xxx_data.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index f14d986f0b5..0cdb8343d65 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -296,7 +296,7 @@ static struct dpll_data dpll1_dd = { static struct clk dpll1_ck = { .name = "dpll1_ck", - .ops = &clkops_null, + .ops = &clkops_omap3_noncore_dpll_ops, .parent = &sys_ck, .dpll_data = &dpll1_dd, .round_rate = &omap2_dpll_round_rate, -- cgit v1.2.3-18-g5258 From 58e846fe7870d0ba22f8eeb1d522fbae37e80cbf Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Fri, 25 Feb 2011 15:49:00 -0700 Subject: OMAP: clock: Add allow_idle/deny_idle support in clkops On OMAP various clock nodes (dpll's, mx post dividers, interface clocks) support hardware level autogating which can be controlled from software. Support such functionality by adding two new function pointer allow_idle and deny_idle in the clkops structure. These function pointers can be populated for any clock node which supports hardware level autogating. Also add 2 new functions (omap_clk_enable_autoidle_all and omap_clk_disable_autoidle_all) which can be called from architecture specific PM core code, if hardware level autogating (for all supported clock nodes) is to be enabled or disabled. Signed-off-by: Rajendra Nayak [paul@pwsan.com: use spinlock rather than mutex due to race; renamed functions; functions now return ints] Signed-off-by: Paul Walmsley --- arch/arm/plat-omap/clock.c | 32 ++++++++++++++++++++++++++++++++ arch/arm/plat-omap/include/plat/clock.h | 6 ++++++ 2 files changed, 38 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index fc62fb5fc20..0ae0eae01fd 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -335,6 +335,38 @@ struct clk *omap_clk_get_by_name(const char *name) return ret; } +int omap_clk_enable_autoidle_all(void) +{ + struct clk *c; + unsigned long flags; + + spin_lock_irqsave(&clockfw_lock, flags); + + list_for_each_entry(c, &clocks, node) + if (c->ops->allow_idle) + c->ops->allow_idle(c); + + spin_unlock_irqrestore(&clockfw_lock, flags); + + return 0; +} + +int omap_clk_disable_autoidle_all(void) +{ + struct clk *c; + unsigned long flags; + + spin_lock_irqsave(&clockfw_lock, flags); + + list_for_each_entry(c, &clocks, node) + if (c->ops->deny_idle) + c->ops->deny_idle(c); + + spin_unlock_irqrestore(&clockfw_lock, flags); + + return 0; +} + /* * Low level helpers */ diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h index d43e6234dbb..be69f5cac32 100644 --- a/arch/arm/plat-omap/include/plat/clock.h +++ b/arch/arm/plat-omap/include/plat/clock.h @@ -25,6 +25,8 @@ struct clockdomain; * @disable: fn ptr that enables the current clock in hardware * @find_idlest: function returning the IDLEST register for the clock's IP blk * @find_companion: function returning the "companion" clk reg for the clock + * @allow_idle: fn ptr that enables autoidle for the current clock in hardware + * @deny_idle: fn ptr that disables autoidle for the current clock in hardware * * A "companion" clk is an accompanying clock to the one being queried * that must be enabled for the IP module connected to the clock to @@ -42,6 +44,8 @@ struct clkops { u8 *, u8 *); void (*find_companion)(struct clk *, void __iomem **, u8 *); + void (*allow_idle)(struct clk *); + void (*deny_idle)(struct clk *); }; #ifdef CONFIG_ARCH_OMAP2PLUS @@ -293,6 +297,8 @@ extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table); extern void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table); #endif extern struct clk *omap_clk_get_by_name(const char *name); +extern int omap_clk_enable_autoidle_all(void); +extern int omap_clk_disable_autoidle_all(void); extern const struct clkops clkops_null; -- cgit v1.2.3-18-g5258 From 6c6f5a7437955cec637c00ab1d09b8f70fc0ab3a Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Fri, 25 Feb 2011 15:49:00 -0700 Subject: OMAP3/4: DPLL: Add allow_idle/deny_idle support for all DPLL's All OMAP3/4 dpll's support hardware level autogating. Populate allow_idle/deny_idle function pointers for all DPLL's in clkops. Signed-off-by: Rajendra Nayak Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clock.c | 8 +++++++- arch/arm/mach-omap2/clock.h | 1 + arch/arm/mach-omap2/clock3xxx_data.c | 2 +- arch/arm/mach-omap2/clock44xx_data.c | 2 +- 4 files changed, 10 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index b1875965bb5..46d03ccc280 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -377,10 +377,16 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent) const struct clkops clkops_omap3_noncore_dpll_ops = { .enable = omap3_noncore_dpll_enable, .disable = omap3_noncore_dpll_disable, + .allow_idle = omap3_dpll_allow_idle, + .deny_idle = omap3_dpll_deny_idle, }; -#endif +const struct clkops clkops_omap3_core_dpll_ops = { + .allow_idle = omap3_dpll_allow_idle, + .deny_idle = omap3_dpll_deny_idle, +}; +#endif /* * OMAP2+ clock reset and init functions diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 896584e3c4a..2a939e5ec6a 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -146,5 +146,6 @@ extern void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table) #endif extern const struct clkops clkops_omap3_noncore_dpll_ops; +extern const struct clkops clkops_omap3_core_dpll_ops; #endif diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 0cdb8343d65..78ea7997686 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -429,7 +429,7 @@ static struct dpll_data dpll3_dd = { static struct clk dpll3_ck = { .name = "dpll3_ck", - .ops = &clkops_null, + .ops = &clkops_omap3_core_dpll_ops, .parent = &sys_ck, .dpll_data = &dpll3_dd, .round_rate = &omap2_dpll_round_rate, diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index de9ec8ddd2a..b843b6e5976 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -443,7 +443,7 @@ static struct clk dpll_core_ck = { .parent = &sys_clkin_ck, .dpll_data = &dpll_core_dd, .init = &omap2_init_dpll_parent, - .ops = &clkops_null, + .ops = &clkops_omap3_core_dpll_ops, .recalc = &omap3_dpll_recalc, }; -- cgit v1.2.3-18-g5258 From b80b956dc56c6a3cb77b97e2abff48fb7ebc2119 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Fri, 25 Feb 2011 15:49:01 -0700 Subject: OMAP2+: clock: autoidle as many clocks as possible if CONFIG_OMAP_RESET_CLOCKS Attempt to enable autoidle for as many clocks as possible in the OMAP2+-common CONFIG_OMAP_RESET_CLOCKS code. Currently, this only enables DPLL autoidle for OMAP3/4 DPLLs; but future patches will enable autoidle for other clocks and the OMAP2 DPLL/APLLs. In the long run, we should probably get rid of CONFIG_OMAP_RESET_CLOCKS, and unconditionally run the code that it selects. Otherwise, the state of the clock tree won't match the hardware state - this could result in clocks being enabled or disabled unpredictably. Based on a patch by Rajendra Nayak that did this in the pm34xx.c/pm44xx.c code. Signed-off-by: Paul Walmsley Cc: Rajendra Nayak --- arch/arm/mach-omap2/pm34xx.c | 17 ----------------- arch/arm/plat-omap/clock.c | 1 + 2 files changed, 1 insertion(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index eda9a4e99a8..a99f296bdbf 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -813,23 +813,6 @@ static void __init prcm_setup_regs(void) omap_ctrl_writel(OMAP3430_AUTOIDLE_MASK, OMAP2_CONTROL_SYSCONFIG); - /* - * Set all plls to autoidle. This is needed until autoidle is - * enabled by clockfw - */ - omap2_cm_write_mod_reg(1 << OMAP3430_AUTO_IVA2_DPLL_SHIFT, - OMAP3430_IVA2_MOD, CM_AUTOIDLE2); - omap2_cm_write_mod_reg(1 << OMAP3430_AUTO_MPU_DPLL_SHIFT, - MPU_MOD, - CM_AUTOIDLE2); - omap2_cm_write_mod_reg((1 << OMAP3430_AUTO_PERIPH_DPLL_SHIFT) | - (1 << OMAP3430_AUTO_CORE_DPLL_SHIFT), - PLL_MOD, - CM_AUTOIDLE); - omap2_cm_write_mod_reg(1 << OMAP3430ES2_AUTO_PERIPH2_DPLL_SHIFT, - PLL_MOD, - CM_AUTOIDLE2); - /* * Enable control of expternal oscillator through * sys_clkreq. In the long run clock framework should diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 0ae0eae01fd..2770dddd72c 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -446,6 +446,7 @@ static int __init clk_disable_unused(void) return 0; } late_initcall(clk_disable_unused); +late_initcall(omap_clk_enable_autoidle_all); #endif int __init clk_init(struct clk_functions * custom_clocks) -- cgit v1.2.3-18-g5258 From 97f678989afe5dd1584a0877dfd8b0d2e124b73a Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Fri, 25 Feb 2011 15:49:01 -0700 Subject: OMAP4: DPLL: Add dpll api to control GATE_CTRL On OMAP4, the dpll post divider outputs (MX outputs) along with clockout_x2 output provide a way to allow/deny hardware level autogating. Allowing autoidle would mean that the hw would autogate this clock when there is no dependency for it. Denying idle would mean that this clock output will be forced to stay enabled. Add dpll api's to read/allow/deny idle control for these dpll mx postdividers. NOTE: The gatectrl bit set to 0 allows gatectrl, and the bit set to 1 denies gatectrl. Signed-off-by: Rajendra Nayak [paul@pwsan.com: moved OMAP4-specific DPLL control code to mach-omap2/dpll44xx.c; added some documentation for CLOCK_CLKOUTX2] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/Makefile | 2 +- arch/arm/mach-omap2/clock.h | 3 ++ arch/arm/mach-omap2/dpll44xx.c | 78 +++++++++++++++++++++++++++++++++ arch/arm/plat-omap/include/plat/clock.h | 14 +++++- 4 files changed, 95 insertions(+), 2 deletions(-) create mode 100644 arch/arm/mach-omap2/dpll44xx.c (limited to 'arch') diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 10c3c8f16ea..89274a9f035 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -123,7 +123,7 @@ obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o \ clock3517.o clock36xx.o \ dpll3xxx.o clock3xxx_data.o obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o \ - dpll3xxx.o + dpll3xxx.o dpll44xx.o # OMAP2 clock rate set data (old "OPP" data) obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 2a939e5ec6a..c450d69a0dc 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -65,6 +65,9 @@ u32 omap3_dpll_autoidle_read(struct clk *clk); int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate); int omap3_noncore_dpll_enable(struct clk *clk); void omap3_noncore_dpll_disable(struct clk *clk); +int omap4_dpllmx_gatectrl_read(struct clk *clk); +void omap4_dpllmx_allow_gatectrl(struct clk *clk); +void omap4_dpllmx_deny_gatectrl(struct clk *clk); #ifdef CONFIG_OMAP_RESET_CLOCKS void omap2_clk_disable_unused(struct clk *clk); diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c new file mode 100644 index 00000000000..94a3592cd54 --- /dev/null +++ b/arch/arm/mach-omap2/dpll44xx.c @@ -0,0 +1,78 @@ +/* + * OMAP4-specific DPLL control functions + * + * Copyright (C) 2011 Texas Instruments, Inc. + * Rajendra Nayak + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +#include +#include + +#include "clock.h" +#include "cm-regbits-44xx.h" + +/* Supported only on OMAP4 */ +int omap4_dpllmx_gatectrl_read(struct clk *clk) +{ + u32 v; + u32 mask; + + if (!clk || !clk->clksel_reg || !cpu_is_omap44xx()) + return -EINVAL; + + mask = clk->flags & CLOCK_CLKOUTX2 ? + OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK : + OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK; + + v = __raw_readl(clk->clksel_reg); + v &= mask; + v >>= __ffs(mask); + + return v; +} + +void omap4_dpllmx_allow_gatectrl(struct clk *clk) +{ + u32 v; + u32 mask; + + if (!clk || !clk->clksel_reg || !cpu_is_omap44xx()) + return; + + mask = clk->flags & CLOCK_CLKOUTX2 ? + OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK : + OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK; + + v = __raw_readl(clk->clksel_reg); + /* Clear the bit to allow gatectrl */ + v &= ~mask; + __raw_writel(v, clk->clksel_reg); +} + +void omap4_dpllmx_deny_gatectrl(struct clk *clk) +{ + u32 v; + u32 mask; + + if (!clk || !clk->clksel_reg || !cpu_is_omap44xx()) + return; + + mask = clk->flags & CLOCK_CLKOUTX2 ? + OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK : + OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK; + + v = __raw_readl(clk->clksel_reg); + /* Set the bit to deny gatectrl */ + v |= mask; + __raw_writel(v, clk->clksel_reg); +} diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h index be69f5cac32..dcd7bb81420 100644 --- a/arch/arm/plat-omap/include/plat/clock.h +++ b/arch/arm/plat-omap/include/plat/clock.h @@ -176,12 +176,24 @@ struct dpll_data { #endif -/* struct clk.flags possibilities */ +/* + * struct clk.flags possibilities + * + * XXX document the rest of the clock flags here + * + * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL + * bits share the same register. This flag allows the + * omap4_dpllmx*() code to determine which GATE_CTRL bit field + * should be used. This is a temporary solution - a better approach + * would be to associate clock type-specific data with the clock, + * similar to the struct dpll_data approach. + */ #define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */ #define CLOCK_IDLE_CONTROL (1 << 1) #define CLOCK_NO_IDLE_PARENT (1 << 2) #define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */ #define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ +#define CLOCK_CLKOUTX2 (1 << 5) /** * struct clk - OMAP struct clk -- cgit v1.2.3-18-g5258 From 70db8a6273692fdf5226c007c9882a10b3203963 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Fri, 25 Feb 2011 15:49:02 -0700 Subject: omap4: dpll: Enable auto gate control for all MX postdividers Enable hardware gate control for all dpll MX and X2 postdividers. This requires the allow_idle/deny_idle functions to be populated for all clock nodes (mx/x2 post dividers) in clkops. Signed-off-by: Rajendra Nayak Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clock.h | 1 + arch/arm/mach-omap2/clock44xx_data.c | 52 +++++++++++++++++++++--------------- arch/arm/mach-omap2/dpll44xx.c | 6 +++++ 3 files changed, 37 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index c450d69a0dc..0725a6ad8b4 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -150,5 +150,6 @@ extern void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table) extern const struct clkops clkops_omap3_noncore_dpll_ops; extern const struct clkops clkops_omap3_core_dpll_ops; +extern const struct clkops clkops_omap4_dpllmx_ops; #endif diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index b843b6e5976..dcbe10571a0 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -278,8 +278,10 @@ static struct clk dpll_abe_ck = { static struct clk dpll_abe_x2_ck = { .name = "dpll_abe_x2_ck", .parent = &dpll_abe_ck, - .ops = &clkops_null, + .flags = CLOCK_CLKOUTX2, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap3_clkoutx2_recalc, + .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_ABE, }; static const struct clksel_rate div31_1to31_rates[] = { @@ -328,7 +330,7 @@ static struct clk dpll_abe_m2x2_ck = { .clksel = dpll_abe_m2x2_div, .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_ABE, .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -395,7 +397,7 @@ static struct clk dpll_abe_m3x2_ck = { .clksel = dpll_abe_m2x2_div, .clksel_reg = OMAP4430_CM_DIV_M3_DPLL_ABE, .clksel_mask = OMAP4430_DPLL_CLKOUTHIF_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -450,6 +452,7 @@ static struct clk dpll_core_ck = { static struct clk dpll_core_x2_ck = { .name = "dpll_core_x2_ck", .parent = &dpll_core_ck, + .flags = CLOCK_CLKOUTX2, .ops = &clkops_null, .recalc = &omap3_clkoutx2_recalc, }; @@ -465,7 +468,7 @@ static struct clk dpll_core_m6x2_ck = { .clksel = dpll_core_m6x2_div, .clksel_reg = OMAP4430_CM_DIV_M6_DPLL_CORE, .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -495,7 +498,7 @@ static struct clk dpll_core_m2_ck = { .clksel = dpll_core_m2_div, .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_CORE, .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -515,7 +518,7 @@ static struct clk dpll_core_m5x2_ck = { .clksel = dpll_core_m6x2_div, .clksel_reg = OMAP4430_CM_DIV_M5_DPLL_CORE, .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -581,7 +584,7 @@ static struct clk dpll_core_m4x2_ck = { .clksel = dpll_core_m6x2_div, .clksel_reg = OMAP4430_CM_DIV_M4_DPLL_CORE, .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -606,7 +609,7 @@ static struct clk dpll_abe_m2_ck = { .clksel = dpll_abe_m2_div, .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_ABE, .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -632,7 +635,7 @@ static struct clk dpll_core_m7x2_ck = { .clksel = dpll_core_m6x2_div, .clksel_reg = OMAP4430_CM_DIV_M7_DPLL_CORE, .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -689,6 +692,7 @@ static struct clk dpll_iva_ck = { static struct clk dpll_iva_x2_ck = { .name = "dpll_iva_x2_ck", .parent = &dpll_iva_ck, + .flags = CLOCK_CLKOUTX2, .ops = &clkops_null, .recalc = &omap3_clkoutx2_recalc, }; @@ -704,7 +708,7 @@ static struct clk dpll_iva_m4x2_ck = { .clksel = dpll_iva_m4x2_div, .clksel_reg = OMAP4430_CM_DIV_M4_DPLL_IVA, .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -716,7 +720,7 @@ static struct clk dpll_iva_m5x2_ck = { .clksel = dpll_iva_m4x2_div, .clksel_reg = OMAP4430_CM_DIV_M5_DPLL_IVA, .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -764,7 +768,7 @@ static struct clk dpll_mpu_m2_ck = { .clksel = dpll_mpu_m2_div, .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_MPU, .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -837,7 +841,7 @@ static struct clk dpll_per_m2_ck = { .clksel = dpll_per_m2_div, .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_PER, .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -846,8 +850,10 @@ static struct clk dpll_per_m2_ck = { static struct clk dpll_per_x2_ck = { .name = "dpll_per_x2_ck", .parent = &dpll_per_ck, - .ops = &clkops_null, + .flags = CLOCK_CLKOUTX2, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap3_clkoutx2_recalc, + .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_PER, }; static const struct clksel dpll_per_m2x2_div[] = { @@ -861,7 +867,7 @@ static struct clk dpll_per_m2x2_ck = { .clksel = dpll_per_m2x2_div, .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_PER, .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -887,7 +893,7 @@ static struct clk dpll_per_m4x2_ck = { .clksel = dpll_per_m2x2_div, .clksel_reg = OMAP4430_CM_DIV_M4_DPLL_PER, .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -899,7 +905,7 @@ static struct clk dpll_per_m5x2_ck = { .clksel = dpll_per_m2x2_div, .clksel_reg = OMAP4430_CM_DIV_M5_DPLL_PER, .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -911,7 +917,7 @@ static struct clk dpll_per_m6x2_ck = { .clksel = dpll_per_m2x2_div, .clksel_reg = OMAP4430_CM_DIV_M6_DPLL_PER, .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -923,7 +929,7 @@ static struct clk dpll_per_m7x2_ck = { .clksel = dpll_per_m2x2_div, .clksel_reg = OMAP4430_CM_DIV_M7_DPLL_PER, .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -964,6 +970,7 @@ static struct clk dpll_unipro_ck = { static struct clk dpll_unipro_x2_ck = { .name = "dpll_unipro_x2_ck", .parent = &dpll_unipro_ck, + .flags = CLOCK_CLKOUTX2, .ops = &clkops_null, .recalc = &omap3_clkoutx2_recalc, }; @@ -979,7 +986,7 @@ static struct clk dpll_unipro_m2x2_ck = { .clksel = dpll_unipro_m2x2_div, .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_UNIPRO, .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, @@ -1028,7 +1035,8 @@ static struct clk dpll_usb_ck = { static struct clk dpll_usb_clkdcoldo_ck = { .name = "dpll_usb_clkdcoldo_ck", .parent = &dpll_usb_ck, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, + .clksel_reg = OMAP4430_CM_CLKDCOLDO_DPLL_USB, .recalc = &followparent_recalc, }; @@ -1043,7 +1051,7 @@ static struct clk dpll_usb_m2_ck = { .clksel = dpll_usb_m2_div, .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_USB, .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_0_6_MASK, - .ops = &clkops_null, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c index 94a3592cd54..4e4da6160d0 100644 --- a/arch/arm/mach-omap2/dpll44xx.c +++ b/arch/arm/mach-omap2/dpll44xx.c @@ -76,3 +76,9 @@ void omap4_dpllmx_deny_gatectrl(struct clk *clk) v |= mask; __raw_writel(v, clk->clksel_reg); } + +const struct clkops clkops_omap4_dpllmx_ops = { + .allow_idle = omap4_dpllmx_allow_gatectrl, + .deny_idle = omap4_dpllmx_deny_gatectrl, +}; + -- cgit v1.2.3-18-g5258 From c6461f5c5970833cf28c5096cdfc7a095eb3bbb5 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Fri, 25 Feb 2011 15:49:53 -0700 Subject: OMAP2+: clock: disable autoidle on all clocks during clock init Disable autoidle on all clocks during clock framework initialization. (If CONFIG_PM is set, autoidle is re-enabled for all clocks later in the boot process.) The principle behind this patch, and some similar patches, is that the kernel should start with all power management features disabled. Later in the boot process, the PM code, if compiled in with CONFIG_PM, enables or re-enables power management features. Signed-off-by: Paul Walmsley Tested-by: Rajendra Nayak Reviewed-by: Kevin Hilman --- arch/arm/mach-omap2/clock2420_data.c | 3 +++ arch/arm/mach-omap2/clock2430_data.c | 3 +++ arch/arm/mach-omap2/clock3xxx.c | 3 --- arch/arm/mach-omap2/clock3xxx_data.c | 6 +++++- arch/arm/mach-omap2/clock44xx_data.c | 3 +++ 5 files changed, 14 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c index 0a992bc8d0d..ee73e14ac3c 100644 --- a/arch/arm/mach-omap2/clock2420_data.c +++ b/arch/arm/mach-omap2/clock2420_data.c @@ -1913,6 +1913,9 @@ int __init omap2420_clk_init(void) omap2_init_clk_clkdm(c->lk.clk); } + /* Disable autoidle on all clocks; let the PM code enable it later */ + omap_clk_disable_autoidle_all(); + /* Check the MPU rate set by bootloader */ clkrate = omap2xxx_clk_get_core_rate(&dpll_ck); for (prcm = rate_table; prcm->mpu_speed; prcm++) { diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c index c047dcd007e..a1298e55d91 100644 --- a/arch/arm/mach-omap2/clock2430_data.c +++ b/arch/arm/mach-omap2/clock2430_data.c @@ -2028,6 +2028,9 @@ int __init omap2430_clk_init(void) omap2_init_clk_clkdm(c->lk.clk); } + /* Disable autoidle on all clocks; let the PM code enable it later */ + omap_clk_disable_autoidle_all(); + /* Check the MPU rate set by bootloader */ clkrate = omap2xxx_clk_get_core_rate(&dpll_ck); for (prcm = rate_table; prcm->mpu_speed; prcm++) { diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c index e9f66b6dec1..952c3e01c9e 100644 --- a/arch/arm/mach-omap2/clock3xxx.c +++ b/arch/arm/mach-omap2/clock3xxx.c @@ -65,9 +65,6 @@ void __init omap3_clk_lock_dpll5(void) clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST); clk_enable(dpll5_clk); - /* Enable autoidle to allow it to enter low power bypass */ - omap3_dpll_allow_idle(dpll5_clk); - /* Program dpll5_m2_clk divider for no division */ dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck"); clk_enable(dpll5_m2_clk); diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 78ea7997686..65b79e6afb5 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3538,6 +3538,9 @@ int __init omap3xxx_clk_init(void) omap2_init_clk_clkdm(c->lk.clk); } + /* Disable autoidle on all clocks; let the PM code enable it later */ + omap_clk_disable_autoidle_all(); + recalculate_root_clocks(); pr_info("Clocking rate (Crystal/Core/MPU): %ld.%01ld/%ld/%ld MHz\n", @@ -3551,7 +3554,8 @@ int __init omap3xxx_clk_init(void) clk_enable_init_clocks(); /* - * Lock DPLL5 and put it in autoidle. + * Lock DPLL5 -- here only until other device init code can + * handle this */ if (!cpu_is_ti816x() && (omap_rev() >= OMAP3430_REV_ES2_0)) omap3_clk_lock_dpll5(); diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index dcbe10571a0..279534240fc 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -3309,6 +3309,9 @@ int __init omap4xxx_clk_init(void) omap2_init_clk_clkdm(c->lk.clk); } + /* Disable autoidle on all clocks; let the PM code enable it later */ + omap_clk_disable_autoidle_all(); + recalculate_root_clocks(); /* -- cgit v1.2.3-18-g5258 From 7bf04be8f48ceeeffa5b5a79734d6d6e0d59e5f8 Mon Sep 17 00:00:00 2001 From: Stratos Psomadakis Date: Fri, 25 Feb 2011 22:46:13 +0200 Subject: x86, asm: Cleanup unnecssary macros in asm-offsets.c PAGE_SIZE_asm, PAGE_SHIFT_asm, THREAD_SIZE_asm can be safely removed from asm-offsets.c, and be replaced by their non-'_asm' counterparts in the code that uses them, since the _AC macro defined in include/linux/const.h makes PAGE_SIZE/PAGE_SHIFT/THREAD_SIZE work with as. Signed-off-by: Stratos Psomadakis LKML-Reference: <1298666774-17646-2-git-send-email-psomas@cslab.ece.ntua.gr> Signed-off-by: H. Peter Anvin --- arch/x86/kernel/asm-offsets.c | 5 ----- arch/x86/kernel/entry_32.S | 2 +- arch/x86/kernel/head_32.S | 8 ++++---- arch/x86/xen/xen-head.S | 4 ++-- 4 files changed, 7 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/asm-offsets.c b/arch/x86/kernel/asm-offsets.c index 2b141c1915a..4f13fafc526 100644 --- a/arch/x86/kernel/asm-offsets.c +++ b/arch/x86/kernel/asm-offsets.c @@ -28,11 +28,6 @@ #endif void common(void) { - BLANK(); - DEFINE(PAGE_SIZE_asm, PAGE_SIZE); - DEFINE(PAGE_SHIFT_asm, PAGE_SHIFT); - DEFINE(THREAD_SIZE_asm, THREAD_SIZE); - BLANK(); OFFSET(TI_flags, thread_info, flags); OFFSET(TI_status, thread_info, status); diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index c8b4efad7eb..49bdedd2dbc 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -395,7 +395,7 @@ sysenter_past_esp: * A tiny bit of offset fixup is necessary - 4*4 means the 4 words * pushed above; +8 corresponds to copy_thread's esp0 setting. */ - pushl_cfi ((TI_sysenter_return)-THREAD_SIZE_asm+8+4*4)(%esp) + pushl_cfi ((TI_sysenter_return)-THREAD_SIZE+8+4*4)(%esp) CFI_REL_OFFSET eip, 0 pushl_cfi %eax diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index 767d6c43de3..187aa63b321 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -73,7 +73,7 @@ MAPPING_BEYOND_END = PAGE_TABLE_SIZE(LOWMEM_PAGES) << PAGE_SHIFT */ KERNEL_PAGES = LOWMEM_PAGES -INIT_MAP_SIZE = PAGE_TABLE_SIZE(KERNEL_PAGES) * PAGE_SIZE_asm +INIT_MAP_SIZE = PAGE_TABLE_SIZE(KERNEL_PAGES) * PAGE_SIZE RESERVE_BRK(pagetables, INIT_MAP_SIZE) /* @@ -623,7 +623,7 @@ ENTRY(initial_code) * BSS section */ __PAGE_ALIGNED_BSS - .align PAGE_SIZE_asm + .align PAGE_SIZE #ifdef CONFIG_X86_PAE initial_pg_pmd: .fill 1024*KPMDS,4,0 @@ -644,7 +644,7 @@ ENTRY(swapper_pg_dir) #ifdef CONFIG_X86_PAE __PAGE_ALIGNED_DATA /* Page-aligned for the benefit of paravirt? */ - .align PAGE_SIZE_asm + .align PAGE_SIZE ENTRY(initial_page_table) .long pa(initial_pg_pmd+PGD_IDENT_ATTR),0 /* low identity map */ # if KPMDS == 3 @@ -662,7 +662,7 @@ ENTRY(initial_page_table) # else # error "Kernel PMDs should be 1, 2 or 3" # endif - .align PAGE_SIZE_asm /* needs to be page-sized too */ + .align PAGE_SIZE /* needs to be page-sized too */ #endif .data diff --git a/arch/x86/xen/xen-head.S b/arch/x86/xen/xen-head.S index 1a5ff24e29c..aaa7291c925 100644 --- a/arch/x86/xen/xen-head.S +++ b/arch/x86/xen/xen-head.S @@ -28,9 +28,9 @@ ENTRY(startup_xen) __FINIT .pushsection .text - .align PAGE_SIZE_asm + .align PAGE_SIZE ENTRY(hypercall_page) - .skip PAGE_SIZE_asm + .skip PAGE_SIZE .popsection ELFNOTE(Xen, XEN_ELFNOTE_GUEST_OS, .asciz "linux") -- cgit v1.2.3-18-g5258 From 8f3112707fabc2f9f932a4ac1c5b92f3266e4662 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Thu, 24 Feb 2011 22:57:14 +0100 Subject: ARM: 6765/1: remove obsolete comment from asm/mach/arch.h Since commit 6fc31d54 this comment is no longer true. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/include/asm/mach/arch.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h index 3a0893a76a3..bf13b814c1b 100644 --- a/arch/arm/include/asm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -15,10 +15,6 @@ struct meminfo; struct sys_timer; struct machine_desc { - /* - * Note! The first two elements are used - * by assembler code in head.S, head-common.S - */ unsigned int nr; /* architecture number */ const char *name; /* architecture name */ unsigned long boot_params; /* tagged list */ -- cgit v1.2.3-18-g5258 From ba55d3db9bb59a52fe45dbc5d62776adbb289e54 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 25 Feb 2011 20:19:32 +0100 Subject: ARM: 6767/1: ptrace: fix register indexing in GETHBPREGS request The GETHBPREGS ptrace request incorrectly maps its index argument onto the thread's saved debug state when the index != 0. This has not yet been seen from userspace because GDB (the only user of this request) only reads from register 0. This patch fixes the indexing. Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/ptrace.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 19c6816db61..b13e70f63d7 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -996,10 +996,10 @@ static int ptrace_gethbpregs(struct task_struct *tsk, long num, while (!(arch_ctrl.len & 0x1)) arch_ctrl.len >>= 1; - if (idx & 0x1) - reg = encode_ctrl_reg(arch_ctrl); - else + if (num & 0x1) reg = bp->attr.bp_addr; + else + reg = encode_ctrl_reg(arch_ctrl); } put: -- cgit v1.2.3-18-g5258 From c09bae709182046ab104757115dfbd74a1ba1a15 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 25 Feb 2011 20:20:42 +0100 Subject: ARM: 6768/1: hw_breakpoint: ensure debug logic is powered up on v7 cores ARMv7 allows the debug core logic to be powered down and provides the DBGPRSR register so that software can power-up and check the status of the logic. This patch ensures that the debug logic is powered up on ARMv7 cores before we attempt to access the extended debug registers. Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/hw_breakpoint.c | 26 +++++++++++++++++++++++--- 1 file changed, 23 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index d600bd35070..44b84fe6e1b 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -836,9 +836,11 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr, /* * One-time initialisation. */ -static void reset_ctrl_regs(void *unused) +static void reset_ctrl_regs(void *info) { - int i; + int i, cpu = smp_processor_id(); + u32 dbg_power; + cpumask_t *cpumask = info; /* * v7 debug contains save and restore registers so that debug state @@ -849,6 +851,17 @@ static void reset_ctrl_regs(void *unused) * later on. */ if (debug_arch >= ARM_DEBUG_ARCH_V7_ECP14) { + /* + * Ensure sticky power-down is clear (i.e. debug logic is + * powered up). + */ + asm volatile("mrc p14, 0, %0, c1, c5, 4" : "=r" (dbg_power)); + if ((dbg_power & 0x1) == 0) { + pr_warning("CPU %d debug is powered down!\n", cpu); + cpumask_or(cpumask, cpumask, cpumask_of(cpu)); + return; + } + /* * Unconditionally clear the lock by writing a value * other than 0xC5ACCE55 to the access register. @@ -887,6 +900,7 @@ static struct notifier_block __cpuinitdata dbg_reset_nb = { static int __init arch_hw_breakpoint_init(void) { u32 dscr; + cpumask_t cpumask = { CPU_BITS_NONE }; debug_arch = get_debug_arch(); @@ -911,7 +925,13 @@ static int __init arch_hw_breakpoint_init(void) * Reset the breakpoint resources. We assume that a halting * debugger will leave the world in a nice state for us. */ - on_each_cpu(reset_ctrl_regs, NULL, 1); + on_each_cpu(reset_ctrl_regs, &cpumask, 1); + if (!cpumask_empty(&cpumask)) { + core_num_brps = 0; + core_num_reserved_brps = 0; + core_num_wrps = 0; + return 0; + } ARM_DBG_READ(c1, 0, dscr); if (dscr & ARM_DSCR_HDBGEN) { -- cgit v1.2.3-18-g5258 From 80f0aad77f3e1e9d9e518b09ac46963d628ae2be Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Fri, 25 Feb 2011 17:54:52 +0100 Subject: ARM: 6766/1: Thumb-2: Reflect ARM/Thumb-2 configuration in module vermagic Loading Thumb-2 modules into an ARM kernel or vice-versa isn't guaranteed to work safely, since the kernel is not interworking- aware everywhere. This patch adds "thumb2" to the module vermagic when CONFIG_THUMB2_KERNEL is enabled, to help avoid accidental loading of modules into the wrong kernel. Signed-off-by: Dave Martin Acked-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/include/asm/module.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm/include/asm/module.h b/arch/arm/include/asm/module.h index a2b775b81cf..543b44916d2 100644 --- a/arch/arm/include/asm/module.h +++ b/arch/arm/include/asm/module.h @@ -40,8 +40,16 @@ struct mod_arch_specific { #define MODULE_ARCH_VERMAGIC_P2V "" #endif +/* Add instruction set architecture tag to distinguish ARM/Thumb kernels */ +#ifdef CONFIG_THUMB2_KERNEL +#define MODULE_ARCH_VERMAGIC_ARMTHUMB "thumb2 " +#else +#define MODULE_ARCH_VERMAGIC_ARMTHUMB "" +#endif + #define MODULE_ARCH_VERMAGIC \ MODULE_ARCH_VERMAGIC_ARMVSN \ + MODULE_ARCH_VERMAGIC_ARMTHUMB \ MODULE_ARCH_VERMAGIC_P2V #endif /* _ASM_ARM_MODULE_H */ -- cgit v1.2.3-18-g5258 From 6cc6b33ab9644db38579dcb66737311fc20269db Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Thu, 24 Feb 2011 02:12:00 +0100 Subject: ARM: 6761/1: Update number of VIC for S5PV210 The S5PV210 SoC have 4 VICs. It requires for suspend and resume. Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim Signed-off-by: Russell King --- arch/arm/common/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig index 778655f0257..909960448eb 100644 --- a/arch/arm/common/Kconfig +++ b/arch/arm/common/Kconfig @@ -6,6 +6,7 @@ config ARM_VIC config ARM_VIC_NR int + default 4 if ARCH_S5PV210 default 2 depends on ARM_VIC help -- cgit v1.2.3-18-g5258 From 59a4f92a3612f3c3ea4c13b43e0e50ae66abfa7b Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Thu, 24 Feb 2011 02:12:44 +0100 Subject: ARM: 6762/1: Update number of VIC for S5P6442 and S5PC100 The S5P6442 and S5PC100 SoCs have 4 VICs. However, default VIC number is defined 2 in arch/arm/common. So can be happened some problem on it. Basically, it requires for suspend and resume. Signed-off-by: Kukjin Kim Signed-off-by: Russell King --- arch/arm/common/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig index 909960448eb..ea5ee4d067f 100644 --- a/arch/arm/common/Kconfig +++ b/arch/arm/common/Kconfig @@ -7,6 +7,7 @@ config ARM_VIC config ARM_VIC_NR int default 4 if ARCH_S5PV210 + default 3 if ARCH_S5P6442 || ARCH_S5PC100 default 2 depends on ARM_VIC help -- cgit v1.2.3-18-g5258 From d239b1dc093d551046a909920b5310c1d1e308c1 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Mon, 21 Feb 2011 04:57:38 +0100 Subject: ARM: 6746/1: remove the 4x expansion presumption while decompressing the kernel We currently presume a 4x expansion to guess the decompressed kernel size in order to determine if the decompressed kernel is in conflict with the location where zImage is loaded. This guess may cause many issues by overestimating the final kernel image size: - This may force a needless relocation if the location of zImage was fine, wasting some precious microseconds of boot time. - The relocation may be located way too far, possibly overwriting the initrd image in RAM. - If the kernel image includes a large already-compressed initramfs image then the problem is even more exacerbated. And if by some strange means the 4x guess is too low then we may overwrite ourselves with the decompressed image. So let's use the exact decompressed kernel image size instead. For that we need to rely on the stat command, but this is hardly a new build dependency as the kernel already depends on many external commands to be built provided by the coreutils package where stat is found. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/boot/compressed/Makefile | 4 +++- arch/arm/boot/compressed/vmlinux.lds.in | 3 --- 2 files changed, 3 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 0a8f748e506..9d328be6e5e 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -83,9 +83,11 @@ endif EXTRA_CFLAGS := -fpic -fno-builtin EXTRA_AFLAGS := -Wa,-march=all +# Provide size of uncompressed kernel to the decompressor via a linker symbol. +LDFLAGS_vmlinux := --defsym _image_size=$(shell stat -c "%s" $(obj)/../Image) # Supply ZRELADDR to the decompressor via a linker symbol. ifneq ($(CONFIG_AUTO_ZRELADDR),y) -LDFLAGS_vmlinux := --defsym zreladdr=$(ZRELADDR) +LDFLAGS_vmlinux += --defsym zreladdr=$(ZRELADDR) endif ifeq ($(CONFIG_CPU_ENDIAN_BE8),y) LDFLAGS_vmlinux += --be8 diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in index 366a924019a..5309909d728 100644 --- a/arch/arm/boot/compressed/vmlinux.lds.in +++ b/arch/arm/boot/compressed/vmlinux.lds.in @@ -43,9 +43,6 @@ SECTIONS _etext = .; - /* Assume size of decompressed image is 4x the compressed image */ - _image_size = (_etext - _text) * 4; - _got_start = .; .got : { *(.got) } _got_end = .; -- cgit v1.2.3-18-g5258 From 3de4ade3d696db31d1543dce585ba6296f876612 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Mon, 21 Feb 2011 19:12:27 +0100 Subject: ARM: 6751/1: vexpress: select applicable errata workarounds in Kconfig The Cortex-A9 tile on the Versatile Express suffers from a number of engineering errata. This patch selects workarounds in the ARCH_VEXPRESS_CA9X4 Kconfig entry so that users don't need to worry about which ones to apply. Reported-by: Ulrich Weigand Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/mach-vexpress/Kconfig | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 3f19b660a16..931148487f0 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -5,5 +5,8 @@ config ARCH_VEXPRESS_CA9X4 bool "Versatile Express Cortex-A9x4 tile" select CPU_V7 select ARM_GIC + select ARM_ERRATA_720789 + select ARM_ERRATA_751472 + select ARM_ERRATA_753970 endmenu -- cgit v1.2.3-18-g5258 From 6767c5203459ebee1410e87450b32bf9f4488406 Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Mon, 14 Feb 2011 13:36:42 +0300 Subject: ARM: pxa/tosa: drop setting LED trigger name, as it's unsupported now Since 2e48928d8a0f38c1b5c81eb3f1294de8a6382c68 it's no longer possible to set the name of the LED trigger for RFKILL events. Drop respective code from tosa-bt.c Signed-off-by: Dmitry Eremin-Solenikov Cc: Stephen Hemminger Cc: John W. Linville Signed-off-by: Eric Miao --- arch/arm/mach-pxa/tosa-bt.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/tosa-bt.c b/arch/arm/mach-pxa/tosa-bt.c index c31e601eb49..b9b1e5c2b29 100644 --- a/arch/arm/mach-pxa/tosa-bt.c +++ b/arch/arm/mach-pxa/tosa-bt.c @@ -81,8 +81,6 @@ static int tosa_bt_probe(struct platform_device *dev) goto err_rfk_alloc; } - rfkill_set_led_trigger_name(rfk, "tosa-bt"); - rc = rfkill_register(rfk); if (rc) goto err_rfkill; -- cgit v1.2.3-18-g5258 From ea73e75200625439061c41a75d9053407c9ebb74 Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Wed, 23 Feb 2011 02:29:09 +0300 Subject: ARM: pxa: enable pxa-pcm-audio on pxa210/pxa25x platform pxa25x platforms were left out of major ASoC Update patch. Since f0fba2ad1b a registration of pxa-pcm-audio device is required for ASoC to function on pxa platforms. Register one also for pxa210/pxa25x. Signed-off-by: Dmitry Eremin-Solenikov Cc: Eric Miao Signed-off-by: Eric Miao --- arch/arm/mach-pxa/pxa25x.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index fbc5b775f89..b166b1d845d 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -347,6 +347,7 @@ static struct platform_device *pxa25x_devices[] __initdata = { &pxa25x_device_assp, &pxa25x_device_pwm0, &pxa25x_device_pwm1, + &pxa_device_asoc_platform, }; static struct sys_device pxa25x_sysdev[] = { -- cgit v1.2.3-18-g5258 From fa4704fee22df9c24297305288b53ba8aae527b4 Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Wed, 23 Feb 2011 02:29:10 +0300 Subject: ARM: pxa/tosa: register wm9712 codec device Since f0fba2ad1b it's required to register platform devices even for AC'97 codecs. Register one on tosa (wm9712-codec). Signed-off-by: Dmitry Eremin-Solenikov Cc: Eric Miao Signed-off-by: Eric Miao --- arch/arm/mach-pxa/tosa.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index af152e70cfc..f2582ec300d 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -875,6 +875,11 @@ static struct platform_device sharpsl_rom_device = { .dev.platform_data = &sharpsl_rom_data, }; +static struct platform_device wm9712_device = { + .name = "wm9712-codec", + .id = -1, +}; + static struct platform_device *devices[] __initdata = { &tosascoop_device, &tosascoop_jc_device, @@ -885,6 +890,7 @@ static struct platform_device *devices[] __initdata = { &tosaled_device, &tosa_bt_device, &sharpsl_rom_device, + &wm9712_device, }; static void tosa_poweroff(void) -- cgit v1.2.3-18-g5258 From eddb12624d9a8087f1f8f1a2812f840c5e8191ac Mon Sep 17 00:00:00 2001 From: Thara Gopinath Date: Wed, 23 Feb 2011 00:14:04 -0700 Subject: OMAP2420: hwmod data: add dmtimer Add dmtimer data. Signed-off-by: Thara Gopinath Signed-off-by: Tarun Kanti DebBarma Acked-by: Benoit Cousson --- arch/arm/mach-omap2/omap_hwmod_2420_data.c | 634 +++++++++++++++++++++++++++++ arch/arm/plat-omap/include/plat/dmtimer.h | 11 + 2 files changed, 645 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index f323c6bb22d..c2f84aa114b 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -337,6 +338,625 @@ static struct omap_hwmod omap2420_iva_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) }; +/* Timer Common */ +static struct omap_hwmod_class_sysconfig omap2420_timer_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_CLOCKACTIVITY | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2420_timer_hwmod_class = { + .name = "timer", + .sysc = &omap2420_timer_sysc, + .rev = OMAP_TIMER_IP_VERSION_1, +}; + +/* timer1 */ +static struct omap_hwmod omap2420_timer1_hwmod; +static struct omap_hwmod_irq_info omap2420_timer1_mpu_irqs[] = { + { .irq = 37, }, +}; + +static struct omap_hwmod_addr_space omap2420_timer1_addrs[] = { + { + .pa_start = 0x48028000, + .pa_end = 0x48028000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_wkup -> timer1 */ +static struct omap_hwmod_ocp_if omap2420_l4_wkup__timer1 = { + .master = &omap2420_l4_wkup_hwmod, + .slave = &omap2420_timer1_hwmod, + .clk = "gpt1_ick", + .addr = omap2420_timer1_addrs, + .addr_cnt = ARRAY_SIZE(omap2420_timer1_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer1 slave port */ +static struct omap_hwmod_ocp_if *omap2420_timer1_slaves[] = { + &omap2420_l4_wkup__timer1, +}; + +/* timer1 hwmod */ +static struct omap_hwmod omap2420_timer1_hwmod = { + .name = "timer1", + .mpu_irqs = omap2420_timer1_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2420_timer1_mpu_irqs), + .main_clk = "gpt1_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPT1_SHIFT, + .module_offs = WKUP_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT1_SHIFT, + }, + }, + .slaves = omap2420_timer1_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_timer1_slaves), + .class = &omap2420_timer_hwmod_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) +}; + +/* timer2 */ +static struct omap_hwmod omap2420_timer2_hwmod; +static struct omap_hwmod_irq_info omap2420_timer2_mpu_irqs[] = { + { .irq = 38, }, +}; + +static struct omap_hwmod_addr_space omap2420_timer2_addrs[] = { + { + .pa_start = 0x4802a000, + .pa_end = 0x4802a000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> timer2 */ +static struct omap_hwmod_ocp_if omap2420_l4_core__timer2 = { + .master = &omap2420_l4_core_hwmod, + .slave = &omap2420_timer2_hwmod, + .clk = "gpt2_ick", + .addr = omap2420_timer2_addrs, + .addr_cnt = ARRAY_SIZE(omap2420_timer2_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer2 slave port */ +static struct omap_hwmod_ocp_if *omap2420_timer2_slaves[] = { + &omap2420_l4_core__timer2, +}; + +/* timer2 hwmod */ +static struct omap_hwmod omap2420_timer2_hwmod = { + .name = "timer2", + .mpu_irqs = omap2420_timer2_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2420_timer2_mpu_irqs), + .main_clk = "gpt2_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPT2_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT2_SHIFT, + }, + }, + .slaves = omap2420_timer2_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_timer2_slaves), + .class = &omap2420_timer_hwmod_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) +}; + +/* timer3 */ +static struct omap_hwmod omap2420_timer3_hwmod; +static struct omap_hwmod_irq_info omap2420_timer3_mpu_irqs[] = { + { .irq = 39, }, +}; + +static struct omap_hwmod_addr_space omap2420_timer3_addrs[] = { + { + .pa_start = 0x48078000, + .pa_end = 0x48078000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> timer3 */ +static struct omap_hwmod_ocp_if omap2420_l4_core__timer3 = { + .master = &omap2420_l4_core_hwmod, + .slave = &omap2420_timer3_hwmod, + .clk = "gpt3_ick", + .addr = omap2420_timer3_addrs, + .addr_cnt = ARRAY_SIZE(omap2420_timer3_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer3 slave port */ +static struct omap_hwmod_ocp_if *omap2420_timer3_slaves[] = { + &omap2420_l4_core__timer3, +}; + +/* timer3 hwmod */ +static struct omap_hwmod omap2420_timer3_hwmod = { + .name = "timer3", + .mpu_irqs = omap2420_timer3_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2420_timer3_mpu_irqs), + .main_clk = "gpt3_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPT3_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT3_SHIFT, + }, + }, + .slaves = omap2420_timer3_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_timer3_slaves), + .class = &omap2420_timer_hwmod_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) +}; + +/* timer4 */ +static struct omap_hwmod omap2420_timer4_hwmod; +static struct omap_hwmod_irq_info omap2420_timer4_mpu_irqs[] = { + { .irq = 40, }, +}; + +static struct omap_hwmod_addr_space omap2420_timer4_addrs[] = { + { + .pa_start = 0x4807a000, + .pa_end = 0x4807a000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> timer4 */ +static struct omap_hwmod_ocp_if omap2420_l4_core__timer4 = { + .master = &omap2420_l4_core_hwmod, + .slave = &omap2420_timer4_hwmod, + .clk = "gpt4_ick", + .addr = omap2420_timer4_addrs, + .addr_cnt = ARRAY_SIZE(omap2420_timer4_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer4 slave port */ +static struct omap_hwmod_ocp_if *omap2420_timer4_slaves[] = { + &omap2420_l4_core__timer4, +}; + +/* timer4 hwmod */ +static struct omap_hwmod omap2420_timer4_hwmod = { + .name = "timer4", + .mpu_irqs = omap2420_timer4_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2420_timer4_mpu_irqs), + .main_clk = "gpt4_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPT4_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT4_SHIFT, + }, + }, + .slaves = omap2420_timer4_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_timer4_slaves), + .class = &omap2420_timer_hwmod_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) +}; + +/* timer5 */ +static struct omap_hwmod omap2420_timer5_hwmod; +static struct omap_hwmod_irq_info omap2420_timer5_mpu_irqs[] = { + { .irq = 41, }, +}; + +static struct omap_hwmod_addr_space omap2420_timer5_addrs[] = { + { + .pa_start = 0x4807c000, + .pa_end = 0x4807c000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> timer5 */ +static struct omap_hwmod_ocp_if omap2420_l4_core__timer5 = { + .master = &omap2420_l4_core_hwmod, + .slave = &omap2420_timer5_hwmod, + .clk = "gpt5_ick", + .addr = omap2420_timer5_addrs, + .addr_cnt = ARRAY_SIZE(omap2420_timer5_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer5 slave port */ +static struct omap_hwmod_ocp_if *omap2420_timer5_slaves[] = { + &omap2420_l4_core__timer5, +}; + +/* timer5 hwmod */ +static struct omap_hwmod omap2420_timer5_hwmod = { + .name = "timer5", + .mpu_irqs = omap2420_timer5_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2420_timer5_mpu_irqs), + .main_clk = "gpt5_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPT5_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT5_SHIFT, + }, + }, + .slaves = omap2420_timer5_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_timer5_slaves), + .class = &omap2420_timer_hwmod_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) +}; + + +/* timer6 */ +static struct omap_hwmod omap2420_timer6_hwmod; +static struct omap_hwmod_irq_info omap2420_timer6_mpu_irqs[] = { + { .irq = 42, }, +}; + +static struct omap_hwmod_addr_space omap2420_timer6_addrs[] = { + { + .pa_start = 0x4807e000, + .pa_end = 0x4807e000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> timer6 */ +static struct omap_hwmod_ocp_if omap2420_l4_core__timer6 = { + .master = &omap2420_l4_core_hwmod, + .slave = &omap2420_timer6_hwmod, + .clk = "gpt6_ick", + .addr = omap2420_timer6_addrs, + .addr_cnt = ARRAY_SIZE(omap2420_timer6_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer6 slave port */ +static struct omap_hwmod_ocp_if *omap2420_timer6_slaves[] = { + &omap2420_l4_core__timer6, +}; + +/* timer6 hwmod */ +static struct omap_hwmod omap2420_timer6_hwmod = { + .name = "timer6", + .mpu_irqs = omap2420_timer6_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2420_timer6_mpu_irqs), + .main_clk = "gpt6_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPT6_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT6_SHIFT, + }, + }, + .slaves = omap2420_timer6_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_timer6_slaves), + .class = &omap2420_timer_hwmod_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) +}; + +/* timer7 */ +static struct omap_hwmod omap2420_timer7_hwmod; +static struct omap_hwmod_irq_info omap2420_timer7_mpu_irqs[] = { + { .irq = 43, }, +}; + +static struct omap_hwmod_addr_space omap2420_timer7_addrs[] = { + { + .pa_start = 0x48080000, + .pa_end = 0x48080000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> timer7 */ +static struct omap_hwmod_ocp_if omap2420_l4_core__timer7 = { + .master = &omap2420_l4_core_hwmod, + .slave = &omap2420_timer7_hwmod, + .clk = "gpt7_ick", + .addr = omap2420_timer7_addrs, + .addr_cnt = ARRAY_SIZE(omap2420_timer7_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer7 slave port */ +static struct omap_hwmod_ocp_if *omap2420_timer7_slaves[] = { + &omap2420_l4_core__timer7, +}; + +/* timer7 hwmod */ +static struct omap_hwmod omap2420_timer7_hwmod = { + .name = "timer7", + .mpu_irqs = omap2420_timer7_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2420_timer7_mpu_irqs), + .main_clk = "gpt7_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPT7_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT7_SHIFT, + }, + }, + .slaves = omap2420_timer7_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_timer7_slaves), + .class = &omap2420_timer_hwmod_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) +}; + +/* timer8 */ +static struct omap_hwmod omap2420_timer8_hwmod; +static struct omap_hwmod_irq_info omap2420_timer8_mpu_irqs[] = { + { .irq = 44, }, +}; + +static struct omap_hwmod_addr_space omap2420_timer8_addrs[] = { + { + .pa_start = 0x48082000, + .pa_end = 0x48082000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> timer8 */ +static struct omap_hwmod_ocp_if omap2420_l4_core__timer8 = { + .master = &omap2420_l4_core_hwmod, + .slave = &omap2420_timer8_hwmod, + .clk = "gpt8_ick", + .addr = omap2420_timer8_addrs, + .addr_cnt = ARRAY_SIZE(omap2420_timer8_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer8 slave port */ +static struct omap_hwmod_ocp_if *omap2420_timer8_slaves[] = { + &omap2420_l4_core__timer8, +}; + +/* timer8 hwmod */ +static struct omap_hwmod omap2420_timer8_hwmod = { + .name = "timer8", + .mpu_irqs = omap2420_timer8_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2420_timer8_mpu_irqs), + .main_clk = "gpt8_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPT8_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT8_SHIFT, + }, + }, + .slaves = omap2420_timer8_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_timer8_slaves), + .class = &omap2420_timer_hwmod_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) +}; + +/* timer9 */ +static struct omap_hwmod omap2420_timer9_hwmod; +static struct omap_hwmod_irq_info omap2420_timer9_mpu_irqs[] = { + { .irq = 45, }, +}; + +static struct omap_hwmod_addr_space omap2420_timer9_addrs[] = { + { + .pa_start = 0x48084000, + .pa_end = 0x48084000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> timer9 */ +static struct omap_hwmod_ocp_if omap2420_l4_core__timer9 = { + .master = &omap2420_l4_core_hwmod, + .slave = &omap2420_timer9_hwmod, + .clk = "gpt9_ick", + .addr = omap2420_timer9_addrs, + .addr_cnt = ARRAY_SIZE(omap2420_timer9_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer9 slave port */ +static struct omap_hwmod_ocp_if *omap2420_timer9_slaves[] = { + &omap2420_l4_core__timer9, +}; + +/* timer9 hwmod */ +static struct omap_hwmod omap2420_timer9_hwmod = { + .name = "timer9", + .mpu_irqs = omap2420_timer9_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2420_timer9_mpu_irqs), + .main_clk = "gpt9_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPT9_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT9_SHIFT, + }, + }, + .slaves = omap2420_timer9_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_timer9_slaves), + .class = &omap2420_timer_hwmod_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) +}; + +/* timer10 */ +static struct omap_hwmod omap2420_timer10_hwmod; +static struct omap_hwmod_irq_info omap2420_timer10_mpu_irqs[] = { + { .irq = 46, }, +}; + +static struct omap_hwmod_addr_space omap2420_timer10_addrs[] = { + { + .pa_start = 0x48086000, + .pa_end = 0x48086000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> timer10 */ +static struct omap_hwmod_ocp_if omap2420_l4_core__timer10 = { + .master = &omap2420_l4_core_hwmod, + .slave = &omap2420_timer10_hwmod, + .clk = "gpt10_ick", + .addr = omap2420_timer10_addrs, + .addr_cnt = ARRAY_SIZE(omap2420_timer10_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer10 slave port */ +static struct omap_hwmod_ocp_if *omap2420_timer10_slaves[] = { + &omap2420_l4_core__timer10, +}; + +/* timer10 hwmod */ +static struct omap_hwmod omap2420_timer10_hwmod = { + .name = "timer10", + .mpu_irqs = omap2420_timer10_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2420_timer10_mpu_irqs), + .main_clk = "gpt10_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPT10_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT10_SHIFT, + }, + }, + .slaves = omap2420_timer10_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_timer10_slaves), + .class = &omap2420_timer_hwmod_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) +}; + +/* timer11 */ +static struct omap_hwmod omap2420_timer11_hwmod; +static struct omap_hwmod_irq_info omap2420_timer11_mpu_irqs[] = { + { .irq = 47, }, +}; + +static struct omap_hwmod_addr_space omap2420_timer11_addrs[] = { + { + .pa_start = 0x48088000, + .pa_end = 0x48088000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> timer11 */ +static struct omap_hwmod_ocp_if omap2420_l4_core__timer11 = { + .master = &omap2420_l4_core_hwmod, + .slave = &omap2420_timer11_hwmod, + .clk = "gpt11_ick", + .addr = omap2420_timer11_addrs, + .addr_cnt = ARRAY_SIZE(omap2420_timer11_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer11 slave port */ +static struct omap_hwmod_ocp_if *omap2420_timer11_slaves[] = { + &omap2420_l4_core__timer11, +}; + +/* timer11 hwmod */ +static struct omap_hwmod omap2420_timer11_hwmod = { + .name = "timer11", + .mpu_irqs = omap2420_timer11_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2420_timer11_mpu_irqs), + .main_clk = "gpt11_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPT11_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT11_SHIFT, + }, + }, + .slaves = omap2420_timer11_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_timer11_slaves), + .class = &omap2420_timer_hwmod_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) +}; + +/* timer12 */ +static struct omap_hwmod omap2420_timer12_hwmod; +static struct omap_hwmod_irq_info omap2420_timer12_mpu_irqs[] = { + { .irq = 48, }, +}; + +static struct omap_hwmod_addr_space omap2420_timer12_addrs[] = { + { + .pa_start = 0x4808a000, + .pa_end = 0x4808a000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> timer12 */ +static struct omap_hwmod_ocp_if omap2420_l4_core__timer12 = { + .master = &omap2420_l4_core_hwmod, + .slave = &omap2420_timer12_hwmod, + .clk = "gpt12_ick", + .addr = omap2420_timer12_addrs, + .addr_cnt = ARRAY_SIZE(omap2420_timer12_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer12 slave port */ +static struct omap_hwmod_ocp_if *omap2420_timer12_slaves[] = { + &omap2420_l4_core__timer12, +}; + +/* timer12 hwmod */ +static struct omap_hwmod omap2420_timer12_hwmod = { + .name = "timer12", + .mpu_irqs = omap2420_timer12_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2420_timer12_mpu_irqs), + .main_clk = "gpt12_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPT12_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT12_SHIFT, + }, + }, + .slaves = omap2420_timer12_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_timer12_slaves), + .class = &omap2420_timer_hwmod_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) +}; + /* l4_wkup -> wd_timer2 */ static struct omap_hwmod_addr_space omap2420_wd_timer2_addrs[] = { { @@ -1326,6 +1946,20 @@ static __initdata struct omap_hwmod *omap2420_hwmods[] = { &omap2420_l4_wkup_hwmod, &omap2420_mpu_hwmod, &omap2420_iva_hwmod, + + &omap2420_timer1_hwmod, + &omap2420_timer2_hwmod, + &omap2420_timer3_hwmod, + &omap2420_timer4_hwmod, + &omap2420_timer5_hwmod, + &omap2420_timer6_hwmod, + &omap2420_timer7_hwmod, + &omap2420_timer8_hwmod, + &omap2420_timer9_hwmod, + &omap2420_timer10_hwmod, + &omap2420_timer11_hwmod, + &omap2420_timer12_hwmod, + &omap2420_wd_timer2_hwmod, &omap2420_uart1_hwmod, &omap2420_uart2_hwmod, diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index dfa3aff9761..d6c70d2f403 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -3,6 +3,12 @@ * * OMAP Dual-Mode Timers * + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * Tarun Kanti DebBarma + * Thara Gopinath + * + * Platform device conversion and hwmod support. + * * Copyright (C) 2005 Nokia Corporation * Author: Lauri Leukkunen * PWM and clock framwork support by Timo Teras. @@ -44,6 +50,11 @@ #define OMAP_TIMER_TRIGGER_OVERFLOW 0x01 #define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE 0x02 +/* + * IP revision identifier so that Highlander IP + * in OMAP4 can be distinguished. + */ +#define OMAP_TIMER_IP_VERSION_1 0x1 struct omap_dm_timer; extern struct omap_dm_timer *gptimer_wakeup; extern struct sys_timer omap_timer; -- cgit v1.2.3-18-g5258 From b6b582291fbe8cca987c8823c87ee4a62b24f105 Mon Sep 17 00:00:00 2001 From: Thara Gopinath Date: Wed, 23 Feb 2011 00:14:05 -0700 Subject: OMAP2430: hwmod data: add dmtimer Add dmtimer data. Signed-off-by: Thara Gopinath Signed-off-by: Tarun Kanti DebBarma Acked-by: Benoit Cousson --- arch/arm/mach-omap2/omap_hwmod_2430_data.c | 633 +++++++++++++++++++++++++++++ 1 file changed, 633 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index de0015d3843..c03699653b0 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include "omap_hwmod_common_data.h" @@ -393,6 +394,624 @@ static struct omap_hwmod omap2430_iva_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) }; +/* Timer Common */ +static struct omap_hwmod_class_sysconfig omap2430_timer_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_CLOCKACTIVITY | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2430_timer_hwmod_class = { + .name = "timer", + .sysc = &omap2430_timer_sysc, + .rev = OMAP_TIMER_IP_VERSION_1, +}; + +/* timer1 */ +static struct omap_hwmod omap2430_timer1_hwmod; +static struct omap_hwmod_irq_info omap2430_timer1_mpu_irqs[] = { + { .irq = 37, }, +}; + +static struct omap_hwmod_addr_space omap2430_timer1_addrs[] = { + { + .pa_start = 0x49018000, + .pa_end = 0x49018000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_wkup -> timer1 */ +static struct omap_hwmod_ocp_if omap2430_l4_wkup__timer1 = { + .master = &omap2430_l4_wkup_hwmod, + .slave = &omap2430_timer1_hwmod, + .clk = "gpt1_ick", + .addr = omap2430_timer1_addrs, + .addr_cnt = ARRAY_SIZE(omap2430_timer1_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer1 slave port */ +static struct omap_hwmod_ocp_if *omap2430_timer1_slaves[] = { + &omap2430_l4_wkup__timer1, +}; + +/* timer1 hwmod */ +static struct omap_hwmod omap2430_timer1_hwmod = { + .name = "timer1", + .mpu_irqs = omap2430_timer1_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2430_timer1_mpu_irqs), + .main_clk = "gpt1_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPT1_SHIFT, + .module_offs = WKUP_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT1_SHIFT, + }, + }, + .slaves = omap2430_timer1_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_timer1_slaves), + .class = &omap2430_timer_hwmod_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) +}; + +/* timer2 */ +static struct omap_hwmod omap2430_timer2_hwmod; +static struct omap_hwmod_irq_info omap2430_timer2_mpu_irqs[] = { + { .irq = 38, }, +}; + +static struct omap_hwmod_addr_space omap2430_timer2_addrs[] = { + { + .pa_start = 0x4802a000, + .pa_end = 0x4802a000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> timer2 */ +static struct omap_hwmod_ocp_if omap2430_l4_core__timer2 = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_timer2_hwmod, + .clk = "gpt2_ick", + .addr = omap2430_timer2_addrs, + .addr_cnt = ARRAY_SIZE(omap2430_timer2_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer2 slave port */ +static struct omap_hwmod_ocp_if *omap2430_timer2_slaves[] = { + &omap2430_l4_core__timer2, +}; + +/* timer2 hwmod */ +static struct omap_hwmod omap2430_timer2_hwmod = { + .name = "timer2", + .mpu_irqs = omap2430_timer2_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2430_timer2_mpu_irqs), + .main_clk = "gpt2_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPT2_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT2_SHIFT, + }, + }, + .slaves = omap2430_timer2_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_timer2_slaves), + .class = &omap2430_timer_hwmod_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) +}; + +/* timer3 */ +static struct omap_hwmod omap2430_timer3_hwmod; +static struct omap_hwmod_irq_info omap2430_timer3_mpu_irqs[] = { + { .irq = 39, }, +}; + +static struct omap_hwmod_addr_space omap2430_timer3_addrs[] = { + { + .pa_start = 0x48078000, + .pa_end = 0x48078000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> timer3 */ +static struct omap_hwmod_ocp_if omap2430_l4_core__timer3 = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_timer3_hwmod, + .clk = "gpt3_ick", + .addr = omap2430_timer3_addrs, + .addr_cnt = ARRAY_SIZE(omap2430_timer3_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer3 slave port */ +static struct omap_hwmod_ocp_if *omap2430_timer3_slaves[] = { + &omap2430_l4_core__timer3, +}; + +/* timer3 hwmod */ +static struct omap_hwmod omap2430_timer3_hwmod = { + .name = "timer3", + .mpu_irqs = omap2430_timer3_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2430_timer3_mpu_irqs), + .main_clk = "gpt3_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPT3_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT3_SHIFT, + }, + }, + .slaves = omap2430_timer3_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_timer3_slaves), + .class = &omap2430_timer_hwmod_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) +}; + +/* timer4 */ +static struct omap_hwmod omap2430_timer4_hwmod; +static struct omap_hwmod_irq_info omap2430_timer4_mpu_irqs[] = { + { .irq = 40, }, +}; + +static struct omap_hwmod_addr_space omap2430_timer4_addrs[] = { + { + .pa_start = 0x4807a000, + .pa_end = 0x4807a000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> timer4 */ +static struct omap_hwmod_ocp_if omap2430_l4_core__timer4 = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_timer4_hwmod, + .clk = "gpt4_ick", + .addr = omap2430_timer4_addrs, + .addr_cnt = ARRAY_SIZE(omap2430_timer4_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer4 slave port */ +static struct omap_hwmod_ocp_if *omap2430_timer4_slaves[] = { + &omap2430_l4_core__timer4, +}; + +/* timer4 hwmod */ +static struct omap_hwmod omap2430_timer4_hwmod = { + .name = "timer4", + .mpu_irqs = omap2430_timer4_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2430_timer4_mpu_irqs), + .main_clk = "gpt4_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPT4_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT4_SHIFT, + }, + }, + .slaves = omap2430_timer4_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_timer4_slaves), + .class = &omap2430_timer_hwmod_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) +}; + +/* timer5 */ +static struct omap_hwmod omap2430_timer5_hwmod; +static struct omap_hwmod_irq_info omap2430_timer5_mpu_irqs[] = { + { .irq = 41, }, +}; + +static struct omap_hwmod_addr_space omap2430_timer5_addrs[] = { + { + .pa_start = 0x4807c000, + .pa_end = 0x4807c000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> timer5 */ +static struct omap_hwmod_ocp_if omap2430_l4_core__timer5 = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_timer5_hwmod, + .clk = "gpt5_ick", + .addr = omap2430_timer5_addrs, + .addr_cnt = ARRAY_SIZE(omap2430_timer5_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer5 slave port */ +static struct omap_hwmod_ocp_if *omap2430_timer5_slaves[] = { + &omap2430_l4_core__timer5, +}; + +/* timer5 hwmod */ +static struct omap_hwmod omap2430_timer5_hwmod = { + .name = "timer5", + .mpu_irqs = omap2430_timer5_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2430_timer5_mpu_irqs), + .main_clk = "gpt5_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPT5_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT5_SHIFT, + }, + }, + .slaves = omap2430_timer5_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_timer5_slaves), + .class = &omap2430_timer_hwmod_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) +}; + +/* timer6 */ +static struct omap_hwmod omap2430_timer6_hwmod; +static struct omap_hwmod_irq_info omap2430_timer6_mpu_irqs[] = { + { .irq = 42, }, +}; + +static struct omap_hwmod_addr_space omap2430_timer6_addrs[] = { + { + .pa_start = 0x4807e000, + .pa_end = 0x4807e000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> timer6 */ +static struct omap_hwmod_ocp_if omap2430_l4_core__timer6 = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_timer6_hwmod, + .clk = "gpt6_ick", + .addr = omap2430_timer6_addrs, + .addr_cnt = ARRAY_SIZE(omap2430_timer6_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer6 slave port */ +static struct omap_hwmod_ocp_if *omap2430_timer6_slaves[] = { + &omap2430_l4_core__timer6, +}; + +/* timer6 hwmod */ +static struct omap_hwmod omap2430_timer6_hwmod = { + .name = "timer6", + .mpu_irqs = omap2430_timer6_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2430_timer6_mpu_irqs), + .main_clk = "gpt6_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPT6_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT6_SHIFT, + }, + }, + .slaves = omap2430_timer6_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_timer6_slaves), + .class = &omap2430_timer_hwmod_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) +}; + +/* timer7 */ +static struct omap_hwmod omap2430_timer7_hwmod; +static struct omap_hwmod_irq_info omap2430_timer7_mpu_irqs[] = { + { .irq = 43, }, +}; + +static struct omap_hwmod_addr_space omap2430_timer7_addrs[] = { + { + .pa_start = 0x48080000, + .pa_end = 0x48080000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> timer7 */ +static struct omap_hwmod_ocp_if omap2430_l4_core__timer7 = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_timer7_hwmod, + .clk = "gpt7_ick", + .addr = omap2430_timer7_addrs, + .addr_cnt = ARRAY_SIZE(omap2430_timer7_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer7 slave port */ +static struct omap_hwmod_ocp_if *omap2430_timer7_slaves[] = { + &omap2430_l4_core__timer7, +}; + +/* timer7 hwmod */ +static struct omap_hwmod omap2430_timer7_hwmod = { + .name = "timer7", + .mpu_irqs = omap2430_timer7_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2430_timer7_mpu_irqs), + .main_clk = "gpt7_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPT7_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT7_SHIFT, + }, + }, + .slaves = omap2430_timer7_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_timer7_slaves), + .class = &omap2430_timer_hwmod_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) +}; + +/* timer8 */ +static struct omap_hwmod omap2430_timer8_hwmod; +static struct omap_hwmod_irq_info omap2430_timer8_mpu_irqs[] = { + { .irq = 44, }, +}; + +static struct omap_hwmod_addr_space omap2430_timer8_addrs[] = { + { + .pa_start = 0x48082000, + .pa_end = 0x48082000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> timer8 */ +static struct omap_hwmod_ocp_if omap2430_l4_core__timer8 = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_timer8_hwmod, + .clk = "gpt8_ick", + .addr = omap2430_timer8_addrs, + .addr_cnt = ARRAY_SIZE(omap2430_timer8_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer8 slave port */ +static struct omap_hwmod_ocp_if *omap2430_timer8_slaves[] = { + &omap2430_l4_core__timer8, +}; + +/* timer8 hwmod */ +static struct omap_hwmod omap2430_timer8_hwmod = { + .name = "timer8", + .mpu_irqs = omap2430_timer8_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2430_timer8_mpu_irqs), + .main_clk = "gpt8_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPT8_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT8_SHIFT, + }, + }, + .slaves = omap2430_timer8_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_timer8_slaves), + .class = &omap2430_timer_hwmod_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) +}; + +/* timer9 */ +static struct omap_hwmod omap2430_timer9_hwmod; +static struct omap_hwmod_irq_info omap2430_timer9_mpu_irqs[] = { + { .irq = 45, }, +}; + +static struct omap_hwmod_addr_space omap2430_timer9_addrs[] = { + { + .pa_start = 0x48084000, + .pa_end = 0x48084000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> timer9 */ +static struct omap_hwmod_ocp_if omap2430_l4_core__timer9 = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_timer9_hwmod, + .clk = "gpt9_ick", + .addr = omap2430_timer9_addrs, + .addr_cnt = ARRAY_SIZE(omap2430_timer9_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer9 slave port */ +static struct omap_hwmod_ocp_if *omap2430_timer9_slaves[] = { + &omap2430_l4_core__timer9, +}; + +/* timer9 hwmod */ +static struct omap_hwmod omap2430_timer9_hwmod = { + .name = "timer9", + .mpu_irqs = omap2430_timer9_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2430_timer9_mpu_irqs), + .main_clk = "gpt9_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPT9_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT9_SHIFT, + }, + }, + .slaves = omap2430_timer9_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_timer9_slaves), + .class = &omap2430_timer_hwmod_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) +}; + +/* timer10 */ +static struct omap_hwmod omap2430_timer10_hwmod; +static struct omap_hwmod_irq_info omap2430_timer10_mpu_irqs[] = { + { .irq = 46, }, +}; + +static struct omap_hwmod_addr_space omap2430_timer10_addrs[] = { + { + .pa_start = 0x48086000, + .pa_end = 0x48086000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> timer10 */ +static struct omap_hwmod_ocp_if omap2430_l4_core__timer10 = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_timer10_hwmod, + .clk = "gpt10_ick", + .addr = omap2430_timer10_addrs, + .addr_cnt = ARRAY_SIZE(omap2430_timer10_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer10 slave port */ +static struct omap_hwmod_ocp_if *omap2430_timer10_slaves[] = { + &omap2430_l4_core__timer10, +}; + +/* timer10 hwmod */ +static struct omap_hwmod omap2430_timer10_hwmod = { + .name = "timer10", + .mpu_irqs = omap2430_timer10_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2430_timer10_mpu_irqs), + .main_clk = "gpt10_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPT10_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT10_SHIFT, + }, + }, + .slaves = omap2430_timer10_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_timer10_slaves), + .class = &omap2430_timer_hwmod_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) +}; + +/* timer11 */ +static struct omap_hwmod omap2430_timer11_hwmod; +static struct omap_hwmod_irq_info omap2430_timer11_mpu_irqs[] = { + { .irq = 47, }, +}; + +static struct omap_hwmod_addr_space omap2430_timer11_addrs[] = { + { + .pa_start = 0x48088000, + .pa_end = 0x48088000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> timer11 */ +static struct omap_hwmod_ocp_if omap2430_l4_core__timer11 = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_timer11_hwmod, + .clk = "gpt11_ick", + .addr = omap2430_timer11_addrs, + .addr_cnt = ARRAY_SIZE(omap2430_timer11_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer11 slave port */ +static struct omap_hwmod_ocp_if *omap2430_timer11_slaves[] = { + &omap2430_l4_core__timer11, +}; + +/* timer11 hwmod */ +static struct omap_hwmod omap2430_timer11_hwmod = { + .name = "timer11", + .mpu_irqs = omap2430_timer11_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2430_timer11_mpu_irqs), + .main_clk = "gpt11_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPT11_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT11_SHIFT, + }, + }, + .slaves = omap2430_timer11_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_timer11_slaves), + .class = &omap2430_timer_hwmod_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) +}; + +/* timer12 */ +static struct omap_hwmod omap2430_timer12_hwmod; +static struct omap_hwmod_irq_info omap2430_timer12_mpu_irqs[] = { + { .irq = 48, }, +}; + +static struct omap_hwmod_addr_space omap2430_timer12_addrs[] = { + { + .pa_start = 0x4808a000, + .pa_end = 0x4808a000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> timer12 */ +static struct omap_hwmod_ocp_if omap2430_l4_core__timer12 = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_timer12_hwmod, + .clk = "gpt12_ick", + .addr = omap2430_timer12_addrs, + .addr_cnt = ARRAY_SIZE(omap2430_timer12_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer12 slave port */ +static struct omap_hwmod_ocp_if *omap2430_timer12_slaves[] = { + &omap2430_l4_core__timer12, +}; + +/* timer12 hwmod */ +static struct omap_hwmod omap2430_timer12_hwmod = { + .name = "timer12", + .mpu_irqs = omap2430_timer12_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2430_timer12_mpu_irqs), + .main_clk = "gpt12_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPT12_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT12_SHIFT, + }, + }, + .slaves = omap2430_timer12_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_timer12_slaves), + .class = &omap2430_timer_hwmod_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) +}; + /* l4_wkup -> wd_timer2 */ static struct omap_hwmod_addr_space omap2430_wd_timer2_addrs[] = { { @@ -1514,6 +2133,20 @@ static __initdata struct omap_hwmod *omap2430_hwmods[] = { &omap2430_l4_wkup_hwmod, &omap2430_mpu_hwmod, &omap2430_iva_hwmod, + + &omap2430_timer1_hwmod, + &omap2430_timer2_hwmod, + &omap2430_timer3_hwmod, + &omap2430_timer4_hwmod, + &omap2430_timer5_hwmod, + &omap2430_timer6_hwmod, + &omap2430_timer7_hwmod, + &omap2430_timer8_hwmod, + &omap2430_timer9_hwmod, + &omap2430_timer10_hwmod, + &omap2430_timer11_hwmod, + &omap2430_timer12_hwmod, + &omap2430_wd_timer2_hwmod, &omap2430_uart1_hwmod, &omap2430_uart2_hwmod, -- cgit v1.2.3-18-g5258 From ce722d269ff85ab11aa680784bcc6eff06e3e3ea Mon Sep 17 00:00:00 2001 From: Thara Gopinath Date: Wed, 23 Feb 2011 00:14:05 -0700 Subject: OMAP3: hwmod data: add dmtimer Add dmtimer data. Signed-off-by: Thara Gopinath Signed-off-by: Tarun Kanti DebBarma Acked-by: Benoit Cousson --- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 649 +++++++++++++++++++++++++++++ 1 file changed, 649 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index e9d00122856..b8776ee241f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -24,6 +24,7 @@ #include #include #include +#include #include "omap_hwmod_common_data.h" @@ -515,6 +516,640 @@ static struct omap_hwmod omap3xxx_iva_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) }; +/* timer class */ +static struct omap_hwmod_class_sysconfig omap3xxx_timer_1ms_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_CLOCKACTIVITY | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_EMUFREE | SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap3xxx_timer_1ms_hwmod_class = { + .name = "timer", + .sysc = &omap3xxx_timer_1ms_sysc, + .rev = OMAP_TIMER_IP_VERSION_1, +}; + +static struct omap_hwmod_class_sysconfig omap3xxx_timer_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap3xxx_timer_hwmod_class = { + .name = "timer", + .sysc = &omap3xxx_timer_sysc, + .rev = OMAP_TIMER_IP_VERSION_1, +}; + +/* timer1 */ +static struct omap_hwmod omap3xxx_timer1_hwmod; +static struct omap_hwmod_irq_info omap3xxx_timer1_mpu_irqs[] = { + { .irq = 37, }, +}; + +static struct omap_hwmod_addr_space omap3xxx_timer1_addrs[] = { + { + .pa_start = 0x48318000, + .pa_end = 0x48318000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_wkup -> timer1 */ +static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__timer1 = { + .master = &omap3xxx_l4_wkup_hwmod, + .slave = &omap3xxx_timer1_hwmod, + .clk = "gpt1_ick", + .addr = omap3xxx_timer1_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_timer1_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer1 slave port */ +static struct omap_hwmod_ocp_if *omap3xxx_timer1_slaves[] = { + &omap3xxx_l4_wkup__timer1, +}; + +/* timer1 hwmod */ +static struct omap_hwmod omap3xxx_timer1_hwmod = { + .name = "timer1", + .mpu_irqs = omap3xxx_timer1_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_timer1_mpu_irqs), + .main_clk = "gpt1_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_GPT1_SHIFT, + .module_offs = WKUP_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_GPT1_SHIFT, + }, + }, + .slaves = omap3xxx_timer1_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_timer1_slaves), + .class = &omap3xxx_timer_1ms_hwmod_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) +}; + +/* timer2 */ +static struct omap_hwmod omap3xxx_timer2_hwmod; +static struct omap_hwmod_irq_info omap3xxx_timer2_mpu_irqs[] = { + { .irq = 38, }, +}; + +static struct omap_hwmod_addr_space omap3xxx_timer2_addrs[] = { + { + .pa_start = 0x49032000, + .pa_end = 0x49032000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> timer2 */ +static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer2 = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_timer2_hwmod, + .clk = "gpt2_ick", + .addr = omap3xxx_timer2_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_timer2_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer2 slave port */ +static struct omap_hwmod_ocp_if *omap3xxx_timer2_slaves[] = { + &omap3xxx_l4_per__timer2, +}; + +/* timer2 hwmod */ +static struct omap_hwmod omap3xxx_timer2_hwmod = { + .name = "timer2", + .mpu_irqs = omap3xxx_timer2_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_timer2_mpu_irqs), + .main_clk = "gpt2_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_GPT2_SHIFT, + .module_offs = OMAP3430_PER_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_GPT2_SHIFT, + }, + }, + .slaves = omap3xxx_timer2_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_timer2_slaves), + .class = &omap3xxx_timer_1ms_hwmod_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) +}; + +/* timer3 */ +static struct omap_hwmod omap3xxx_timer3_hwmod; +static struct omap_hwmod_irq_info omap3xxx_timer3_mpu_irqs[] = { + { .irq = 39, }, +}; + +static struct omap_hwmod_addr_space omap3xxx_timer3_addrs[] = { + { + .pa_start = 0x49034000, + .pa_end = 0x49034000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> timer3 */ +static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer3 = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_timer3_hwmod, + .clk = "gpt3_ick", + .addr = omap3xxx_timer3_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_timer3_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer3 slave port */ +static struct omap_hwmod_ocp_if *omap3xxx_timer3_slaves[] = { + &omap3xxx_l4_per__timer3, +}; + +/* timer3 hwmod */ +static struct omap_hwmod omap3xxx_timer3_hwmod = { + .name = "timer3", + .mpu_irqs = omap3xxx_timer3_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_timer3_mpu_irqs), + .main_clk = "gpt3_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_GPT3_SHIFT, + .module_offs = OMAP3430_PER_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_GPT3_SHIFT, + }, + }, + .slaves = omap3xxx_timer3_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_timer3_slaves), + .class = &omap3xxx_timer_hwmod_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) +}; + +/* timer4 */ +static struct omap_hwmod omap3xxx_timer4_hwmod; +static struct omap_hwmod_irq_info omap3xxx_timer4_mpu_irqs[] = { + { .irq = 40, }, +}; + +static struct omap_hwmod_addr_space omap3xxx_timer4_addrs[] = { + { + .pa_start = 0x49036000, + .pa_end = 0x49036000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> timer4 */ +static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer4 = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_timer4_hwmod, + .clk = "gpt4_ick", + .addr = omap3xxx_timer4_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_timer4_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer4 slave port */ +static struct omap_hwmod_ocp_if *omap3xxx_timer4_slaves[] = { + &omap3xxx_l4_per__timer4, +}; + +/* timer4 hwmod */ +static struct omap_hwmod omap3xxx_timer4_hwmod = { + .name = "timer4", + .mpu_irqs = omap3xxx_timer4_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_timer4_mpu_irqs), + .main_clk = "gpt4_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_GPT4_SHIFT, + .module_offs = OMAP3430_PER_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_GPT4_SHIFT, + }, + }, + .slaves = omap3xxx_timer4_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_timer4_slaves), + .class = &omap3xxx_timer_hwmod_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) +}; + +/* timer5 */ +static struct omap_hwmod omap3xxx_timer5_hwmod; +static struct omap_hwmod_irq_info omap3xxx_timer5_mpu_irqs[] = { + { .irq = 41, }, +}; + +static struct omap_hwmod_addr_space omap3xxx_timer5_addrs[] = { + { + .pa_start = 0x49038000, + .pa_end = 0x49038000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> timer5 */ +static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer5 = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_timer5_hwmod, + .clk = "gpt5_ick", + .addr = omap3xxx_timer5_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_timer5_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer5 slave port */ +static struct omap_hwmod_ocp_if *omap3xxx_timer5_slaves[] = { + &omap3xxx_l4_per__timer5, +}; + +/* timer5 hwmod */ +static struct omap_hwmod omap3xxx_timer5_hwmod = { + .name = "timer5", + .mpu_irqs = omap3xxx_timer5_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_timer5_mpu_irqs), + .main_clk = "gpt5_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_GPT5_SHIFT, + .module_offs = OMAP3430_PER_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_GPT5_SHIFT, + }, + }, + .slaves = omap3xxx_timer5_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_timer5_slaves), + .class = &omap3xxx_timer_hwmod_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) +}; + +/* timer6 */ +static struct omap_hwmod omap3xxx_timer6_hwmod; +static struct omap_hwmod_irq_info omap3xxx_timer6_mpu_irqs[] = { + { .irq = 42, }, +}; + +static struct omap_hwmod_addr_space omap3xxx_timer6_addrs[] = { + { + .pa_start = 0x4903A000, + .pa_end = 0x4903A000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> timer6 */ +static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer6 = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_timer6_hwmod, + .clk = "gpt6_ick", + .addr = omap3xxx_timer6_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_timer6_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer6 slave port */ +static struct omap_hwmod_ocp_if *omap3xxx_timer6_slaves[] = { + &omap3xxx_l4_per__timer6, +}; + +/* timer6 hwmod */ +static struct omap_hwmod omap3xxx_timer6_hwmod = { + .name = "timer6", + .mpu_irqs = omap3xxx_timer6_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_timer6_mpu_irqs), + .main_clk = "gpt6_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_GPT6_SHIFT, + .module_offs = OMAP3430_PER_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_GPT6_SHIFT, + }, + }, + .slaves = omap3xxx_timer6_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_timer6_slaves), + .class = &omap3xxx_timer_hwmod_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) +}; + +/* timer7 */ +static struct omap_hwmod omap3xxx_timer7_hwmod; +static struct omap_hwmod_irq_info omap3xxx_timer7_mpu_irqs[] = { + { .irq = 43, }, +}; + +static struct omap_hwmod_addr_space omap3xxx_timer7_addrs[] = { + { + .pa_start = 0x4903C000, + .pa_end = 0x4903C000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> timer7 */ +static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer7 = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_timer7_hwmod, + .clk = "gpt7_ick", + .addr = omap3xxx_timer7_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_timer7_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer7 slave port */ +static struct omap_hwmod_ocp_if *omap3xxx_timer7_slaves[] = { + &omap3xxx_l4_per__timer7, +}; + +/* timer7 hwmod */ +static struct omap_hwmod omap3xxx_timer7_hwmod = { + .name = "timer7", + .mpu_irqs = omap3xxx_timer7_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_timer7_mpu_irqs), + .main_clk = "gpt7_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_GPT7_SHIFT, + .module_offs = OMAP3430_PER_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_GPT7_SHIFT, + }, + }, + .slaves = omap3xxx_timer7_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_timer7_slaves), + .class = &omap3xxx_timer_hwmod_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) +}; + +/* timer8 */ +static struct omap_hwmod omap3xxx_timer8_hwmod; +static struct omap_hwmod_irq_info omap3xxx_timer8_mpu_irqs[] = { + { .irq = 44, }, +}; + +static struct omap_hwmod_addr_space omap3xxx_timer8_addrs[] = { + { + .pa_start = 0x4903E000, + .pa_end = 0x4903E000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> timer8 */ +static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer8 = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_timer8_hwmod, + .clk = "gpt8_ick", + .addr = omap3xxx_timer8_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_timer8_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer8 slave port */ +static struct omap_hwmod_ocp_if *omap3xxx_timer8_slaves[] = { + &omap3xxx_l4_per__timer8, +}; + +/* timer8 hwmod */ +static struct omap_hwmod omap3xxx_timer8_hwmod = { + .name = "timer8", + .mpu_irqs = omap3xxx_timer8_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_timer8_mpu_irqs), + .main_clk = "gpt8_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_GPT8_SHIFT, + .module_offs = OMAP3430_PER_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_GPT8_SHIFT, + }, + }, + .slaves = omap3xxx_timer8_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_timer8_slaves), + .class = &omap3xxx_timer_hwmod_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) +}; + +/* timer9 */ +static struct omap_hwmod omap3xxx_timer9_hwmod; +static struct omap_hwmod_irq_info omap3xxx_timer9_mpu_irqs[] = { + { .irq = 45, }, +}; + +static struct omap_hwmod_addr_space omap3xxx_timer9_addrs[] = { + { + .pa_start = 0x49040000, + .pa_end = 0x49040000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> timer9 */ +static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer9 = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_timer9_hwmod, + .clk = "gpt9_ick", + .addr = omap3xxx_timer9_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_timer9_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer9 slave port */ +static struct omap_hwmod_ocp_if *omap3xxx_timer9_slaves[] = { + &omap3xxx_l4_per__timer9, +}; + +/* timer9 hwmod */ +static struct omap_hwmod omap3xxx_timer9_hwmod = { + .name = "timer9", + .mpu_irqs = omap3xxx_timer9_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_timer9_mpu_irqs), + .main_clk = "gpt9_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_GPT9_SHIFT, + .module_offs = OMAP3430_PER_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_GPT9_SHIFT, + }, + }, + .slaves = omap3xxx_timer9_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_timer9_slaves), + .class = &omap3xxx_timer_hwmod_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) +}; + +/* timer10 */ +static struct omap_hwmod omap3xxx_timer10_hwmod; +static struct omap_hwmod_irq_info omap3xxx_timer10_mpu_irqs[] = { + { .irq = 46, }, +}; + +static struct omap_hwmod_addr_space omap3xxx_timer10_addrs[] = { + { + .pa_start = 0x48086000, + .pa_end = 0x48086000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> timer10 */ +static struct omap_hwmod_ocp_if omap3xxx_l4_core__timer10 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_timer10_hwmod, + .clk = "gpt10_ick", + .addr = omap3xxx_timer10_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_timer10_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer10 slave port */ +static struct omap_hwmod_ocp_if *omap3xxx_timer10_slaves[] = { + &omap3xxx_l4_core__timer10, +}; + +/* timer10 hwmod */ +static struct omap_hwmod omap3xxx_timer10_hwmod = { + .name = "timer10", + .mpu_irqs = omap3xxx_timer10_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_timer10_mpu_irqs), + .main_clk = "gpt10_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_GPT10_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_GPT10_SHIFT, + }, + }, + .slaves = omap3xxx_timer10_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_timer10_slaves), + .class = &omap3xxx_timer_1ms_hwmod_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) +}; + +/* timer11 */ +static struct omap_hwmod omap3xxx_timer11_hwmod; +static struct omap_hwmod_irq_info omap3xxx_timer11_mpu_irqs[] = { + { .irq = 47, }, +}; + +static struct omap_hwmod_addr_space omap3xxx_timer11_addrs[] = { + { + .pa_start = 0x48088000, + .pa_end = 0x48088000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> timer11 */ +static struct omap_hwmod_ocp_if omap3xxx_l4_core__timer11 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_timer11_hwmod, + .clk = "gpt11_ick", + .addr = omap3xxx_timer11_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_timer11_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer11 slave port */ +static struct omap_hwmod_ocp_if *omap3xxx_timer11_slaves[] = { + &omap3xxx_l4_core__timer11, +}; + +/* timer11 hwmod */ +static struct omap_hwmod omap3xxx_timer11_hwmod = { + .name = "timer11", + .mpu_irqs = omap3xxx_timer11_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_timer11_mpu_irqs), + .main_clk = "gpt11_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_GPT11_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_GPT11_SHIFT, + }, + }, + .slaves = omap3xxx_timer11_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_timer11_slaves), + .class = &omap3xxx_timer_hwmod_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) +}; + +/* timer12*/ +static struct omap_hwmod omap3xxx_timer12_hwmod; +static struct omap_hwmod_irq_info omap3xxx_timer12_mpu_irqs[] = { + { .irq = 95, }, +}; + +static struct omap_hwmod_addr_space omap3xxx_timer12_addrs[] = { + { + .pa_start = 0x48304000, + .pa_end = 0x48304000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_core -> timer12 */ +static struct omap_hwmod_ocp_if omap3xxx_l4_core__timer12 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_timer12_hwmod, + .clk = "gpt12_ick", + .addr = omap3xxx_timer12_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_timer12_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* timer12 slave port */ +static struct omap_hwmod_ocp_if *omap3xxx_timer12_slaves[] = { + &omap3xxx_l4_core__timer12, +}; + +/* timer12 hwmod */ +static struct omap_hwmod omap3xxx_timer12_hwmod = { + .name = "timer12", + .mpu_irqs = omap3xxx_timer12_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_timer12_mpu_irqs), + .main_clk = "gpt12_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_GPT12_SHIFT, + .module_offs = WKUP_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_GPT12_SHIFT, + }, + }, + .slaves = omap3xxx_timer12_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_timer12_slaves), + .class = &omap3xxx_timer_hwmod_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) +}; + /* l4_wkup -> wd_timer2 */ static struct omap_hwmod_addr_space omap3xxx_wd_timer2_addrs[] = { { @@ -2219,6 +2854,20 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { &omap3xxx_l4_wkup_hwmod, &omap3xxx_mpu_hwmod, &omap3xxx_iva_hwmod, + + &omap3xxx_timer1_hwmod, + &omap3xxx_timer2_hwmod, + &omap3xxx_timer3_hwmod, + &omap3xxx_timer4_hwmod, + &omap3xxx_timer5_hwmod, + &omap3xxx_timer6_hwmod, + &omap3xxx_timer7_hwmod, + &omap3xxx_timer8_hwmod, + &omap3xxx_timer9_hwmod, + &omap3xxx_timer10_hwmod, + &omap3xxx_timer11_hwmod, + &omap3xxx_timer12_hwmod, + &omap3xxx_wd_timer2_hwmod, &omap3xxx_uart1_hwmod, &omap3xxx_uart2_hwmod, -- cgit v1.2.3-18-g5258 From afbb1edcd48bc7e2d90d6ae9ea5aa662d222c07c Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 28 Feb 2011 15:24:07 +0900 Subject: ARM: S3C2440: Register PCM device on GTA02 The ASoC multi-component patch introduced a new pcm platform device, which needs to be registered by board files in order for sound to work. This patch does this for the gta02 board. Signed-off-by: Lars-Peter Clausen Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c2440/mach-gta02.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c index 9f2c14ec718..e83062bde41 100644 --- a/arch/arm/mach-s3c2440/mach-gta02.c +++ b/arch/arm/mach-s3c2440/mach-gta02.c @@ -509,6 +509,7 @@ static struct platform_device *gta02_devices[] __initdata = { >a02_nor_flash, &s3c24xx_pwm_device, &s3c_device_iis, + &samsung_asoc_dma, &s3c_device_i2c0, }; -- cgit v1.2.3-18-g5258 From 003ddede62892f332992b200b1a1d7506f253d56 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 28 Feb 2011 15:24:34 +0900 Subject: ARM: S3C2440: Add button support on GTA02 This patch adds support for the two buttons found on the gta02 device, which are connectd to gpio pins, using the gpio-keys driver. Signed-off-by: Lars-Peter Clausen Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c2440/mach-gta02.c | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c index e83062bde41..6629998bafd 100644 --- a/arch/arm/mach-s3c2440/mach-gta02.c +++ b/arch/arm/mach-s3c2440/mach-gta02.c @@ -58,6 +58,9 @@ #include #include +#include +#include + #include #include #include @@ -489,6 +492,36 @@ static struct s3c2410_hcd_info gta02_usb_info __initdata = { }, }; +/* Buttons */ +static struct gpio_keys_button gta02_buttons[] = { + { + .gpio = GTA02_GPIO_AUX_KEY, + .code = KEY_PHONE, + .desc = "Aux", + .type = EV_KEY, + .debounce_interval = 100, + }, + { + .gpio = GTA02_GPIO_HOLD_KEY, + .code = KEY_PAUSE, + .desc = "Hold", + .type = EV_KEY, + .debounce_interval = 100, + }, +}; + +static struct gpio_keys_platform_data gta02_buttons_pdata = { + .buttons = gta02_buttons, + .nbuttons = ARRAY_SIZE(gta02_buttons), +}; + +static struct platform_device gta02_buttons_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = >a02_buttons_pdata, + }, +}; static void __init gta02_map_io(void) { @@ -511,6 +544,7 @@ static struct platform_device *gta02_devices[] __initdata = { &s3c_device_iis, &samsung_asoc_dma, &s3c_device_i2c0, + >a02_buttons_device, }; /* These guys DO need to be children of PMU. */ -- cgit v1.2.3-18-g5258 From 7cda34407714b17db73d59f8fa9e9b62ee594ebf Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 28 Feb 2011 15:25:08 +0900 Subject: ARM: S3C2440: Fix regulator valid_modes_ops on GTA02 The REGULATOR_CHANGE_STATUS flag needs to be set on valid_ops_mask, otherwise it a driver wont be able to turn the regulator on or off. Signed-off-by: Lars-Peter Clausen Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c2440/mach-gta02.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c index 6629998bafd..e57c4d85129 100644 --- a/arch/arm/mach-s3c2440/mach-gta02.c +++ b/arch/arm/mach-s3c2440/mach-gta02.c @@ -314,8 +314,8 @@ struct pcf50633_platform_data gta02_pcf_pdata = { .min_uV = 2000000, .max_uV = 3300000, .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, }, }, [PCF50633_REGULATOR_LDO1] = { @@ -323,6 +323,7 @@ struct pcf50633_platform_data gta02_pcf_pdata = { .min_uV = 3300000, .max_uV = 3300000, .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, .apply_uV = 1, .state_mem = { .enabled = 0, @@ -350,6 +351,7 @@ struct pcf50633_platform_data gta02_pcf_pdata = { .min_uV = 3200000, .max_uV = 3200000, .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, .apply_uV = 1, }, }, @@ -358,6 +360,7 @@ struct pcf50633_platform_data gta02_pcf_pdata = { .min_uV = 3000000, .max_uV = 3000000, .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, .apply_uV = 1, .state_mem = { .enabled = 1, -- cgit v1.2.3-18-g5258 From 3c861b88d0c2a1099b75c7a28648514cc67c8be6 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 28 Feb 2011 15:25:43 +0900 Subject: ARM: S3C2440: Call regulator_has_full_constraints on GTA02 This allows the regulator core to disable all regulators which are not in use at the end of the kernel init phase. Signed-off-by: Lars-Peter Clausen Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c2440/mach-gta02.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c index e57c4d85129..66004212380 100644 --- a/arch/arm/mach-s3c2440/mach-gta02.c +++ b/arch/arm/mach-s3c2440/mach-gta02.c @@ -605,6 +605,8 @@ static void __init gta02_machine_init(void) platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices)); pm_power_off = gta02_poweroff; + + regulator_has_full_constraints(); } -- cgit v1.2.3-18-g5258 From 510dc2ec6849f1ca8ab829b8149d08b955db381b Mon Sep 17 00:00:00 2001 From: Richard Zhu Date: Tue, 22 Feb 2011 18:13:22 +0800 Subject: ARM: imx53: add sdhc pad settings Signed-off-by: Richard Zhao Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/include/mach/iomux-mx53.h | 83 +++++++++++++++-------------- 1 file changed, 43 insertions(+), 40 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx53.h b/arch/arm/plat-mxc/include/mach/iomux-mx53.h index bae7fd040cd..e95d9cb8aeb 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx53.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx53.h @@ -27,6 +27,9 @@ #define MX53_UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST | PAD_CTL_HYS) +#define MX53_SDHC_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_HIGH | \ + PAD_CTL_SRE_FAST) #define _MX53_PAD_GPIO_19__KPP_COL_5 IOMUX_PAD(0x348, 0x20, 0, 0x840, 0, 0) #define _MX53_PAD_GPIO_19__GPIO4_5 IOMUX_PAD(0x348, 0x20, 1, 0x0, 0, 0) @@ -2057,13 +2060,13 @@ #define MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7 (_MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B (_MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_RESET_B__GPIO7_4 (_MX53_PAD_PATA_RESET_B__GPIO7_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_PATA_RESET_B__ESDHC3_CMD (_MX53_PAD_PATA_RESET_B__ESDHC3_CMD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_RESET_B__ESDHC3_CMD (_MX53_PAD_PATA_RESET_B__ESDHC3_CMD | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) #define MX53_PAD_PATA_RESET_B__UART1_CTS (_MX53_PAD_PATA_RESET_B__UART1_CTS | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_RESET_B__CAN2_TXCAN (_MX53_PAD_PATA_RESET_B__CAN2_TXCAN | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0 (_MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_IORDY__PATA_IORDY (_MX53_PAD_PATA_IORDY__PATA_IORDY | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_IORDY__GPIO7_5 (_MX53_PAD_PATA_IORDY__GPIO7_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_PATA_IORDY__ESDHC3_CLK (_MX53_PAD_PATA_IORDY__ESDHC3_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_IORDY__ESDHC3_CLK (_MX53_PAD_PATA_IORDY__ESDHC3_CLK | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) #define MX53_PAD_PATA_IORDY__UART1_RTS (_MX53_PAD_PATA_IORDY__UART1_RTS | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_IORDY__CAN2_RXCAN (_MX53_PAD_PATA_IORDY__CAN2_RXCAN | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1 (_MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -2074,12 +2077,12 @@ #define MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2 (_MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DA_1__PATA_DA_1 (_MX53_PAD_PATA_DA_1__PATA_DA_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DA_1__GPIO7_7 (_MX53_PAD_PATA_DA_1__GPIO7_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_PATA_DA_1__ESDHC4_CMD (_MX53_PAD_PATA_DA_1__ESDHC4_CMD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DA_1__ESDHC4_CMD (_MX53_PAD_PATA_DA_1__ESDHC4_CMD | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) #define MX53_PAD_PATA_DA_1__UART3_CTS (_MX53_PAD_PATA_DA_1__UART3_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3 (_MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DA_2__PATA_DA_2 (_MX53_PAD_PATA_DA_2__PATA_DA_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DA_2__GPIO7_8 (_MX53_PAD_PATA_DA_2__GPIO7_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_PATA_DA_2__ESDHC4_CLK (_MX53_PAD_PATA_DA_2__ESDHC4_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DA_2__ESDHC4_CLK (_MX53_PAD_PATA_DA_2__ESDHC4_CLK | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) #define MX53_PAD_PATA_DA_2__UART3_RTS (_MX53_PAD_PATA_DA_2__UART3_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4 (_MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_CS_0__PATA_CS_0 (_MX53_PAD_PATA_CS_0__PATA_CS_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -2093,124 +2096,124 @@ #define MX53_PAD_PATA_DATA0__PATA_DATA_0 (_MX53_PAD_PATA_DATA0__PATA_DATA_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA0__GPIO2_0 (_MX53_PAD_PATA_DATA0__GPIO2_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 (_MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_PATA_DATA0__ESDHC3_DAT4 (_MX53_PAD_PATA_DATA0__ESDHC3_DAT4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA0__ESDHC3_DAT4 (_MX53_PAD_PATA_DATA0__ESDHC3_DAT4 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) #define MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0 (_MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0 (_MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7 (_MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA1__PATA_DATA_1 (_MX53_PAD_PATA_DATA1__PATA_DATA_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA1__GPIO2_1 (_MX53_PAD_PATA_DATA1__GPIO2_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 (_MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_PATA_DATA1__ESDHC3_DAT5 (_MX53_PAD_PATA_DATA1__ESDHC3_DAT5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA1__ESDHC3_DAT5 (_MX53_PAD_PATA_DATA1__ESDHC3_DAT5 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) #define MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1 (_MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1 (_MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA2__PATA_DATA_2 (_MX53_PAD_PATA_DATA2__PATA_DATA_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA2__GPIO2_2 (_MX53_PAD_PATA_DATA2__GPIO2_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 (_MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_PATA_DATA2__ESDHC3_DAT6 (_MX53_PAD_PATA_DATA2__ESDHC3_DAT6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA2__ESDHC3_DAT6 (_MX53_PAD_PATA_DATA2__ESDHC3_DAT6 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) #define MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2 (_MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2 (_MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA3__PATA_DATA_3 (_MX53_PAD_PATA_DATA3__PATA_DATA_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA3__GPIO2_3 (_MX53_PAD_PATA_DATA3__GPIO2_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 (_MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_PATA_DATA3__ESDHC3_DAT7 (_MX53_PAD_PATA_DATA3__ESDHC3_DAT7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA3__ESDHC3_DAT7 (_MX53_PAD_PATA_DATA3__ESDHC3_DAT7 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) #define MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3 (_MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3 (_MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA4__PATA_DATA_4 (_MX53_PAD_PATA_DATA4__PATA_DATA_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA4__GPIO2_4 (_MX53_PAD_PATA_DATA4__GPIO2_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 (_MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_PATA_DATA4__ESDHC4_DAT4 (_MX53_PAD_PATA_DATA4__ESDHC4_DAT4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA4__ESDHC4_DAT4 (_MX53_PAD_PATA_DATA4__ESDHC4_DAT4 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) #define MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4 (_MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4 (_MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA5__PATA_DATA_5 (_MX53_PAD_PATA_DATA5__PATA_DATA_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA5__GPIO2_5 (_MX53_PAD_PATA_DATA5__GPIO2_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 (_MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_PATA_DATA5__ESDHC4_DAT5 (_MX53_PAD_PATA_DATA5__ESDHC4_DAT5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA5__ESDHC4_DAT5 (_MX53_PAD_PATA_DATA5__ESDHC4_DAT5 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) #define MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5 (_MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5 (_MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA6__PATA_DATA_6 (_MX53_PAD_PATA_DATA6__PATA_DATA_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA6__GPIO2_6 (_MX53_PAD_PATA_DATA6__GPIO2_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 (_MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_PATA_DATA6__ESDHC4_DAT6 (_MX53_PAD_PATA_DATA6__ESDHC4_DAT6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA6__ESDHC4_DAT6 (_MX53_PAD_PATA_DATA6__ESDHC4_DAT6 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) #define MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6 (_MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6 (_MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA7__PATA_DATA_7 (_MX53_PAD_PATA_DATA7__PATA_DATA_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA7__GPIO2_7 (_MX53_PAD_PATA_DATA7__GPIO2_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 (_MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_PATA_DATA7__ESDHC4_DAT7 (_MX53_PAD_PATA_DATA7__ESDHC4_DAT7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA7__ESDHC4_DAT7 (_MX53_PAD_PATA_DATA7__ESDHC4_DAT7 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) #define MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7 (_MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7 (_MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA8__PATA_DATA_8 (_MX53_PAD_PATA_DATA8__PATA_DATA_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA8__GPIO2_8 (_MX53_PAD_PATA_DATA8__GPIO2_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_PATA_DATA8__ESDHC1_DAT4 (_MX53_PAD_PATA_DATA8__ESDHC1_DAT4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA8__ESDHC1_DAT4 (_MX53_PAD_PATA_DATA8__ESDHC1_DAT4 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) #define MX53_PAD_PATA_DATA8__EMI_NANDF_D_8 (_MX53_PAD_PATA_DATA8__EMI_NANDF_D_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_PATA_DATA8__ESDHC3_DAT0 (_MX53_PAD_PATA_DATA8__ESDHC3_DAT0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA8__ESDHC3_DAT0 (_MX53_PAD_PATA_DATA8__ESDHC3_DAT0 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) #define MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8 (_MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8 (_MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA9__PATA_DATA_9 (_MX53_PAD_PATA_DATA9__PATA_DATA_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA9__GPIO2_9 (_MX53_PAD_PATA_DATA9__GPIO2_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_PATA_DATA9__ESDHC1_DAT5 (_MX53_PAD_PATA_DATA9__ESDHC1_DAT5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA9__ESDHC1_DAT5 (_MX53_PAD_PATA_DATA9__ESDHC1_DAT5 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) #define MX53_PAD_PATA_DATA9__EMI_NANDF_D_9 (_MX53_PAD_PATA_DATA9__EMI_NANDF_D_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_PATA_DATA9__ESDHC3_DAT1 (_MX53_PAD_PATA_DATA9__ESDHC3_DAT1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA9__ESDHC3_DAT1 (_MX53_PAD_PATA_DATA9__ESDHC3_DAT1 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) #define MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9 (_MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9 (_MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA10__PATA_DATA_10 (_MX53_PAD_PATA_DATA10__PATA_DATA_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA10__GPIO2_10 (_MX53_PAD_PATA_DATA10__GPIO2_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_PATA_DATA10__ESDHC1_DAT6 (_MX53_PAD_PATA_DATA10__ESDHC1_DAT6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA10__ESDHC1_DAT6 (_MX53_PAD_PATA_DATA10__ESDHC1_DAT6 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) #define MX53_PAD_PATA_DATA10__EMI_NANDF_D_10 (_MX53_PAD_PATA_DATA10__EMI_NANDF_D_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_PATA_DATA10__ESDHC3_DAT2 (_MX53_PAD_PATA_DATA10__ESDHC3_DAT2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA10__ESDHC3_DAT2 (_MX53_PAD_PATA_DATA10__ESDHC3_DAT2 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) #define MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10 (_MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10 (_MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA11__PATA_DATA_11 (_MX53_PAD_PATA_DATA11__PATA_DATA_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA11__GPIO2_11 (_MX53_PAD_PATA_DATA11__GPIO2_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_PATA_DATA11__ESDHC1_DAT7 (_MX53_PAD_PATA_DATA11__ESDHC1_DAT7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA11__ESDHC1_DAT7 (_MX53_PAD_PATA_DATA11__ESDHC1_DAT7 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) #define MX53_PAD_PATA_DATA11__EMI_NANDF_D_11 (_MX53_PAD_PATA_DATA11__EMI_NANDF_D_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_PATA_DATA11__ESDHC3_DAT3 (_MX53_PAD_PATA_DATA11__ESDHC3_DAT3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA11__ESDHC3_DAT3 (_MX53_PAD_PATA_DATA11__ESDHC3_DAT3 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) #define MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11 (_MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11 (_MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA12__PATA_DATA_12 (_MX53_PAD_PATA_DATA12__PATA_DATA_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA12__GPIO2_12 (_MX53_PAD_PATA_DATA12__GPIO2_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_PATA_DATA12__ESDHC2_DAT4 (_MX53_PAD_PATA_DATA12__ESDHC2_DAT4 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA12__ESDHC2_DAT4 (_MX53_PAD_PATA_DATA12__ESDHC2_DAT4 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) #define MX53_PAD_PATA_DATA12__EMI_NANDF_D_12 (_MX53_PAD_PATA_DATA12__EMI_NANDF_D_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_PATA_DATA12__ESDHC4_DAT0 (_MX53_PAD_PATA_DATA12__ESDHC4_DAT0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA12__ESDHC4_DAT0 (_MX53_PAD_PATA_DATA12__ESDHC4_DAT0 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) #define MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12 (_MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12 (_MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA13__PATA_DATA_13 (_MX53_PAD_PATA_DATA13__PATA_DATA_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA13__GPIO2_13 (_MX53_PAD_PATA_DATA13__GPIO2_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_PATA_DATA13__ESDHC2_DAT5 (_MX53_PAD_PATA_DATA13__ESDHC2_DAT5 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA13__ESDHC2_DAT5 (_MX53_PAD_PATA_DATA13__ESDHC2_DAT5 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) #define MX53_PAD_PATA_DATA13__EMI_NANDF_D_13 (_MX53_PAD_PATA_DATA13__EMI_NANDF_D_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_PATA_DATA13__ESDHC4_DAT1 (_MX53_PAD_PATA_DATA13__ESDHC4_DAT1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA13__ESDHC4_DAT1 (_MX53_PAD_PATA_DATA13__ESDHC4_DAT1 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) #define MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13 (_MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13 (_MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA14__PATA_DATA_14 (_MX53_PAD_PATA_DATA14__PATA_DATA_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA14__GPIO2_14 (_MX53_PAD_PATA_DATA14__GPIO2_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_PATA_DATA14__ESDHC2_DAT6 (_MX53_PAD_PATA_DATA14__ESDHC2_DAT6 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA14__ESDHC2_DAT6 (_MX53_PAD_PATA_DATA14__ESDHC2_DAT6 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) #define MX53_PAD_PATA_DATA14__EMI_NANDF_D_14 (_MX53_PAD_PATA_DATA14__EMI_NANDF_D_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_PATA_DATA14__ESDHC4_DAT2 (_MX53_PAD_PATA_DATA14__ESDHC4_DAT2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA14__ESDHC4_DAT2 (_MX53_PAD_PATA_DATA14__ESDHC4_DAT2 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) #define MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14 (_MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14 (_MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA15__PATA_DATA_15 (_MX53_PAD_PATA_DATA15__PATA_DATA_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA15__GPIO2_15 (_MX53_PAD_PATA_DATA15__GPIO2_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_PATA_DATA15__ESDHC2_DAT7 (_MX53_PAD_PATA_DATA15__ESDHC2_DAT7 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA15__ESDHC2_DAT7 (_MX53_PAD_PATA_DATA15__ESDHC2_DAT7 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) #define MX53_PAD_PATA_DATA15__EMI_NANDF_D_15 (_MX53_PAD_PATA_DATA15__EMI_NANDF_D_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_PATA_DATA15__ESDHC4_DAT3 (_MX53_PAD_PATA_DATA15__ESDHC4_DAT3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_DATA15__ESDHC4_DAT3 (_MX53_PAD_PATA_DATA15__ESDHC4_DAT3 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) #define MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15 (_MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15 (_MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_SD1_DATA0__ESDHC1_DAT0 (_MX53_PAD_SD1_DATA0__ESDHC1_DAT0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA0__ESDHC1_DAT0 (_MX53_PAD_SD1_DATA0__ESDHC1_DAT0 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) #define MX53_PAD_SD1_DATA0__GPIO1_16 (_MX53_PAD_SD1_DATA0__GPIO1_16 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD1_DATA0__GPT_CAPIN1 (_MX53_PAD_SD1_DATA0__GPT_CAPIN1 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD1_DATA0__CSPI_MISO (_MX53_PAD_SD1_DATA0__CSPI_MISO | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD1_DATA0__CCM_PLL3_BYP (_MX53_PAD_SD1_DATA0__CCM_PLL3_BYP | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_SD1_DATA1__ESDHC1_DAT1 (_MX53_PAD_SD1_DATA1__ESDHC1_DAT1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA1__ESDHC1_DAT1 (_MX53_PAD_SD1_DATA1__ESDHC1_DAT1 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) #define MX53_PAD_SD1_DATA1__GPIO1_17 (_MX53_PAD_SD1_DATA1__GPIO1_17 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD1_DATA1__GPT_CAPIN2 (_MX53_PAD_SD1_DATA1__GPT_CAPIN2 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD1_DATA1__CSPI_SS0 (_MX53_PAD_SD1_DATA1__CSPI_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD1_DATA1__CCM_PLL4_BYP (_MX53_PAD_SD1_DATA1__CCM_PLL4_BYP | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_SD1_CMD__ESDHC1_CMD (_MX53_PAD_SD1_CMD__ESDHC1_CMD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_CMD__ESDHC1_CMD (_MX53_PAD_SD1_CMD__ESDHC1_CMD | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) #define MX53_PAD_SD1_CMD__GPIO1_18 (_MX53_PAD_SD1_CMD__GPIO1_18 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD1_CMD__GPT_CMPOUT1 (_MX53_PAD_SD1_CMD__GPT_CMPOUT1 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD1_CMD__CSPI_MOSI (_MX53_PAD_SD1_CMD__CSPI_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD1_CMD__CCM_PLL1_BYP (_MX53_PAD_SD1_CMD__CCM_PLL1_BYP | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_SD1_DATA2__ESDHC1_DAT2 (_MX53_PAD_SD1_DATA2__ESDHC1_DAT2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA2__ESDHC1_DAT2 (_MX53_PAD_SD1_DATA2__ESDHC1_DAT2 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) #define MX53_PAD_SD1_DATA2__GPIO1_19 (_MX53_PAD_SD1_DATA2__GPIO1_19 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD1_DATA2__GPT_CMPOUT2 (_MX53_PAD_SD1_DATA2__GPT_CMPOUT2 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD1_DATA2__PWM2_PWMO (_MX53_PAD_SD1_DATA2__PWM2_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -2218,13 +2221,13 @@ #define MX53_PAD_SD1_DATA2__CSPI_SS1 (_MX53_PAD_SD1_DATA2__CSPI_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB (_MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD1_DATA2__CCM_PLL2_BYP (_MX53_PAD_SD1_DATA2__CCM_PLL2_BYP | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_SD1_CLK__ESDHC1_CLK (_MX53_PAD_SD1_CLK__ESDHC1_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_CLK__ESDHC1_CLK (_MX53_PAD_SD1_CLK__ESDHC1_CLK | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) #define MX53_PAD_SD1_CLK__GPIO1_20 (_MX53_PAD_SD1_CLK__GPIO1_20 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD1_CLK__OSC32k_32K_OUT (_MX53_PAD_SD1_CLK__OSC32k_32K_OUT | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD1_CLK__GPT_CLKIN (_MX53_PAD_SD1_CLK__GPT_CLKIN | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD1_CLK__CSPI_SCLK (_MX53_PAD_SD1_CLK__CSPI_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD1_CLK__SATA_PHY_DTB_0 (_MX53_PAD_SD1_CLK__SATA_PHY_DTB_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_SD1_DATA3__ESDHC1_DAT3 (_MX53_PAD_SD1_DATA3__ESDHC1_DAT3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD1_DATA3__ESDHC1_DAT3 (_MX53_PAD_SD1_DATA3__ESDHC1_DAT3 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) #define MX53_PAD_SD1_DATA3__GPIO1_21 (_MX53_PAD_SD1_DATA3__GPIO1_21 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD1_DATA3__GPT_CMPOUT3 (_MX53_PAD_SD1_DATA3__GPT_CMPOUT3 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD1_DATA3__PWM1_PWMO (_MX53_PAD_SD1_DATA3__PWM1_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -2232,37 +2235,37 @@ #define MX53_PAD_SD1_DATA3__CSPI_SS2 (_MX53_PAD_SD1_DATA3__CSPI_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB (_MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1 (_MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_SD2_CLK__ESDHC2_CLK (_MX53_PAD_SD2_CLK__ESDHC2_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_CLK__ESDHC2_CLK (_MX53_PAD_SD2_CLK__ESDHC2_CLK | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) #define MX53_PAD_SD2_CLK__GPIO1_10 (_MX53_PAD_SD2_CLK__GPIO1_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD2_CLK__KPP_COL_5 (_MX53_PAD_SD2_CLK__KPP_COL_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS (_MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD2_CLK__CSPI_SCLK (_MX53_PAD_SD2_CLK__CSPI_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD2_CLK__SCC_RANDOM_V (_MX53_PAD_SD2_CLK__SCC_RANDOM_V | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_SD2_CMD__ESDHC2_CMD (_MX53_PAD_SD2_CMD__ESDHC2_CMD | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_CMD__ESDHC2_CMD (_MX53_PAD_SD2_CMD__ESDHC2_CMD | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) #define MX53_PAD_SD2_CMD__GPIO1_11 (_MX53_PAD_SD2_CMD__GPIO1_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD2_CMD__KPP_ROW_5 (_MX53_PAD_SD2_CMD__KPP_ROW_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC (_MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD2_CMD__CSPI_MOSI (_MX53_PAD_SD2_CMD__CSPI_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD2_CMD__SCC_RANDOM (_MX53_PAD_SD2_CMD__SCC_RANDOM | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_SD2_DATA3__ESDHC2_DAT3 (_MX53_PAD_SD2_DATA3__ESDHC2_DAT3 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA3__ESDHC2_DAT3 (_MX53_PAD_SD2_DATA3__ESDHC2_DAT3 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) #define MX53_PAD_SD2_DATA3__GPIO1_12 (_MX53_PAD_SD2_DATA3__GPIO1_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD2_DATA3__KPP_COL_6 (_MX53_PAD_SD2_DATA3__KPP_COL_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC (_MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD2_DATA3__CSPI_SS2 (_MX53_PAD_SD2_DATA3__CSPI_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD2_DATA3__SJC_DONE (_MX53_PAD_SD2_DATA3__SJC_DONE | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_SD2_DATA2__ESDHC2_DAT2 (_MX53_PAD_SD2_DATA2__ESDHC2_DAT2 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA2__ESDHC2_DAT2 (_MX53_PAD_SD2_DATA2__ESDHC2_DAT2 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) #define MX53_PAD_SD2_DATA2__GPIO1_13 (_MX53_PAD_SD2_DATA2__GPIO1_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD2_DATA2__KPP_ROW_6 (_MX53_PAD_SD2_DATA2__KPP_ROW_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD (_MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD2_DATA2__CSPI_SS1 (_MX53_PAD_SD2_DATA2__CSPI_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD2_DATA2__SJC_FAIL (_MX53_PAD_SD2_DATA2__SJC_FAIL | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_SD2_DATA1__ESDHC2_DAT1 (_MX53_PAD_SD2_DATA1__ESDHC2_DAT1 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA1__ESDHC2_DAT1 (_MX53_PAD_SD2_DATA1__ESDHC2_DAT1 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) #define MX53_PAD_SD2_DATA1__GPIO1_14 (_MX53_PAD_SD2_DATA1__GPIO1_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD2_DATA1__KPP_COL_7 (_MX53_PAD_SD2_DATA1__KPP_COL_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS (_MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD2_DATA1__CSPI_SS0 (_MX53_PAD_SD2_DATA1__CSPI_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD2_DATA1__RTIC_SEC_VIO (_MX53_PAD_SD2_DATA1__RTIC_SEC_VIO | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_SD2_DATA0__ESDHC2_DAT0 (_MX53_PAD_SD2_DATA0__ESDHC2_DAT0 | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_SD2_DATA0__ESDHC2_DAT0 (_MX53_PAD_SD2_DATA0__ESDHC2_DAT0 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) #define MX53_PAD_SD2_DATA0__GPIO1_15 (_MX53_PAD_SD2_DATA0__GPIO1_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD2_DATA0__KPP_ROW_7 (_MX53_PAD_SD2_DATA0__KPP_ROW_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD (_MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD | MUX_PAD_CTRL(NO_PAD_CTRL)) -- cgit v1.2.3-18-g5258 From ddb95fdd25d38a53eb3d227cc1a21f997d3bef7d Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 22 Feb 2011 20:24:13 -0300 Subject: ARM: imx/mach-mx25_3ds: Use IMX_GPIO_NR instead of hard-coded values Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/mach-mx25_3ds.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c index aafc6f7f181..66b6cdd5821 100644 --- a/arch/arm/mach-imx/mach-mx25_3ds.c +++ b/arch/arm/mach-imx/mach-mx25_3ds.c @@ -109,8 +109,8 @@ static const struct fec_platform_data mx25_fec_pdata __initconst = { .phy = PHY_INTERFACE_MODE_RMII, }; -#define FEC_ENABLE_GPIO 35 -#define FEC_RESET_B_GPIO 104 +#define FEC_ENABLE_GPIO IMX_GPIO_NR(2, 3) +#define FEC_RESET_B_GPIO IMX_GPIO_NR(4, 8) static void __init mx25pdk_fec_reset(void) { -- cgit v1.2.3-18-g5258 From b03b2a7a2007e4122ec105b54580327d4126e000 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 23 Feb 2011 16:06:55 +0800 Subject: ARM: mx51_defconfig: change CONFIG_LEDS_CLASS 'm' to 'y' This patch is to fix the warning below. arch/arm/configs/mx51_defconfig:113:warning: symbol value 'm' invalid for LEDS_CLASS Signed-off-by: Shawn Guo Signed-off-by: Sascha Hauer --- arch/arm/configs/mx51_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/configs/mx51_defconfig b/arch/arm/configs/mx51_defconfig index 9cba68cfa51..e3c903281f7 100644 --- a/arch/arm/configs/mx51_defconfig +++ b/arch/arm/configs/mx51_defconfig @@ -110,7 +110,7 @@ CONFIG_MMC=y CONFIG_MMC_BLOCK=m CONFIG_MMC_SDHCI=m CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=m +CONFIG_LEDS_CLASS=y CONFIG_RTC_CLASS=y CONFIG_RTC_INTF_DEV_UIE_EMUL=y CONFIG_EXT2_FS=y -- cgit v1.2.3-18-g5258 From ea7ee4cae4db6630b388f39c3abe4f86f67211f9 Mon Sep 17 00:00:00 2001 From: Denis 'GNUtoo' Carikli Date: Fri, 18 Feb 2011 22:22:23 +0100 Subject: mx31: add support for the bugbase 1.3 from buglabs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Note that the hardware schematics and documentations can be obtained here: http://www.bugcommunity.com/wiki/index.php/BUGbase Signed-off-by: Denis 'GNUtoo' Carikli Acked-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/Kconfig | 9 ++++ arch/arm/mach-mx3/Makefile | 1 + arch/arm/mach-mx3/mach-bug.c | 66 +++++++++++++++++++++++++++++ arch/arm/plat-mxc/include/mach/uncompress.h | 4 ++ 4 files changed, 80 insertions(+) create mode 100644 arch/arm/mach-mx3/mach-bug.c (limited to 'arch') diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index de80d980fe6..4f57f13c028 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -199,6 +199,15 @@ config MACH_KZM_ARM11_01 Include support for KZM-ARM11-01. This includes specific configurations for the board and its peripherals. +config MACH_BUG + bool "Support Buglabs BUGBase platform" + select SOC_IMX31 + select IMX_HAVE_PLATFORM_IMX_UART + default y + help + Include support for BUGBase 1.3 platform. This includes specific + configurations for the board and its peripherals. + config MACH_EUKREA_CPUIMX35 bool "Support Eukrea CPUIMX35 Platform" select SOC_IMX35 diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile index 224d07a79d7..a54faf2cf5f 100644 --- a/arch/arm/mach-mx3/Makefile +++ b/arch/arm/mach-mx3/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o +obj-$(CONFIG_MACH_BUG) += mach-bug.o obj-$(CONFIG_MACH_EUKREA_CPUIMX35) += mach-cpuimx35.o obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd-baseboard.o obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o diff --git a/arch/arm/mach-mx3/mach-bug.c b/arch/arm/mach-mx3/mach-bug.c new file mode 100644 index 00000000000..d137d7078ee --- /dev/null +++ b/arch/arm/mach-mx3/mach-bug.c @@ -0,0 +1,66 @@ +/* + * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2011 Denis 'GNUtoo' Carikli + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include + +#include "devices-imx31.h" + +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static const unsigned int bug_pins[] __initconst = { + MX31_PIN_PC_RST__CTS5, + MX31_PIN_PC_VS2__RTS5, + MX31_PIN_PC_BVD2__TXD5, + MX31_PIN_PC_BVD1__RXD5, +}; + +static void __init bug_board_init(void) +{ + mxc_iomux_setup_multiple_pins(bug_pins, + ARRAY_SIZE(bug_pins), "uart-4"); + imx31_add_imx_uart4(&uart_pdata); +} + +static void __init bug_timer_init(void) +{ + mx31_clocks_init(26000000); +} + +static struct sys_timer bug_timer = { + .init = bug_timer_init, +}; + +MACHINE_START(BUG, "BugLabs BUGBase") + .map_io = mx31_map_io, + .init_early = imx31_init_early, + .init_irq = mx31_init_irq, + .timer = &bug_timer, + .init_machine = bug_board_init, +MACHINE_END diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h index 74125588621..4864b0afd44 100644 --- a/arch/arm/plat-mxc/include/mach/uncompress.h +++ b/arch/arm/plat-mxc/include/mach/uncompress.h @@ -62,6 +62,7 @@ static inline void flush(void) #define MX2X_UART1_BASE_ADDR 0x1000a000 #define MX3X_UART1_BASE_ADDR 0x43F90000 #define MX3X_UART2_BASE_ADDR 0x43F94000 +#define MX3X_UART5_BASE_ADDR 0x43FB4000 #define MX51_UART1_BASE_ADDR 0x73fbc000 #define MX50_UART1_BASE_ADDR 0x53fbc000 #define MX53_UART1_BASE_ADDR 0x53fbc000 @@ -102,6 +103,9 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) case MACH_TYPE_MAGX_ZN5: uart_base = MX3X_UART2_BASE_ADDR; break; + case MACH_TYPE_BUG: + uart_base = MX3X_UART5_BASE_ADDR; + break; case MACH_TYPE_MX51_BABBAGE: case MACH_TYPE_EUKREA_CPUIMX51SD: case MACH_TYPE_MX51_3DS: -- cgit v1.2.3-18-g5258 From 710ac54be44e0cc53f5bf29b03d12c8706e7077a Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 17 Feb 2011 00:26:57 -0700 Subject: dt/powerpc: move of_bus_type infrastructure to ibmebus arch/powerpc/kernel/ibmebus.c is the only remaining user of the of_bus_type support code for initializing the bus and registering drivers. All others have either been switched to the vanilla platform bus or already have their own infrastructure. This patch moves the functionality that ibmebus is using out of drivers/of/{platform,device}.c and into ibmebus.c where it is actually used. Also renames the moved symbols from of_platform_* to ibmebus_bus_* to reflect the actual usage. This patch is part of moving all of the of_platform_bus_type users over to the platform_bus_type. Signed-off-by: Grant Likely --- arch/powerpc/kernel/ibmebus.c | 404 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 400 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c index f62efdfd176..c00d4ca1ee1 100644 --- a/arch/powerpc/kernel/ibmebus.c +++ b/arch/powerpc/kernel/ibmebus.c @@ -201,13 +201,14 @@ int ibmebus_register_driver(struct of_platform_driver *drv) /* If the driver uses devices that ibmebus doesn't know, add them */ ibmebus_create_devices(drv->driver.of_match_table); - return of_register_driver(drv, &ibmebus_bus_type); + drv->driver.bus = &ibmebus_bus_type; + return driver_register(&drv->driver); } EXPORT_SYMBOL(ibmebus_register_driver); void ibmebus_unregister_driver(struct of_platform_driver *drv) { - of_unregister_driver(drv); + driver_unregister(&drv->driver); } EXPORT_SYMBOL(ibmebus_unregister_driver); @@ -308,15 +309,410 @@ static ssize_t ibmebus_store_remove(struct bus_type *bus, } } + static struct bus_attribute ibmebus_bus_attrs[] = { __ATTR(probe, S_IWUSR, NULL, ibmebus_store_probe), __ATTR(remove, S_IWUSR, NULL, ibmebus_store_remove), __ATTR_NULL }; +static int ibmebus_bus_bus_match(struct device *dev, struct device_driver *drv) +{ + const struct of_device_id *matches = drv->of_match_table; + + if (!matches) + return 0; + + return of_match_device(matches, dev) != NULL; +} + +static int ibmebus_bus_device_probe(struct device *dev) +{ + int error = -ENODEV; + struct of_platform_driver *drv; + struct platform_device *of_dev; + const struct of_device_id *match; + + drv = to_of_platform_driver(dev->driver); + of_dev = to_platform_device(dev); + + if (!drv->probe) + return error; + + of_dev_get(of_dev); + + match = of_match_device(drv->driver.of_match_table, dev); + if (match) + error = drv->probe(of_dev, match); + if (error) + of_dev_put(of_dev); + + return error; +} + +static int ibmebus_bus_device_remove(struct device *dev) +{ + struct platform_device *of_dev = to_platform_device(dev); + struct of_platform_driver *drv = to_of_platform_driver(dev->driver); + + if (dev->driver && drv->remove) + drv->remove(of_dev); + return 0; +} + +static void ibmebus_bus_device_shutdown(struct device *dev) +{ + struct platform_device *of_dev = to_platform_device(dev); + struct of_platform_driver *drv = to_of_platform_driver(dev->driver); + + if (dev->driver && drv->shutdown) + drv->shutdown(of_dev); +} + +/* + * ibmebus_bus_device_attrs + */ +static ssize_t devspec_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct platform_device *ofdev; + + ofdev = to_platform_device(dev); + return sprintf(buf, "%s\n", ofdev->dev.of_node->full_name); +} + +static ssize_t name_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct platform_device *ofdev; + + ofdev = to_platform_device(dev); + return sprintf(buf, "%s\n", ofdev->dev.of_node->name); +} + +static ssize_t modalias_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + ssize_t len = of_device_get_modalias(dev, buf, PAGE_SIZE - 2); + buf[len] = '\n'; + buf[len+1] = 0; + return len+1; +} + +struct device_attribute ibmebus_bus_device_attrs[] = { + __ATTR_RO(devspec), + __ATTR_RO(name), + __ATTR_RO(modalias), + __ATTR_NULL +}; + +#ifdef CONFIG_PM_SLEEP +static int ibmebus_bus_legacy_suspend(struct device *dev, pm_message_t mesg) +{ + struct platform_device *of_dev = to_platform_device(dev); + struct of_platform_driver *drv = to_of_platform_driver(dev->driver); + int ret = 0; + + if (dev->driver && drv->suspend) + ret = drv->suspend(of_dev, mesg); + return ret; +} + +static int ibmebus_bus_legacy_resume(struct device *dev) +{ + struct platform_device *of_dev = to_platform_device(dev); + struct of_platform_driver *drv = to_of_platform_driver(dev->driver); + int ret = 0; + + if (dev->driver && drv->resume) + ret = drv->resume(of_dev); + return ret; +} + +static int ibmebus_bus_pm_prepare(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (drv && drv->pm && drv->pm->prepare) + ret = drv->pm->prepare(dev); + + return ret; +} + +static void ibmebus_bus_pm_complete(struct device *dev) +{ + struct device_driver *drv = dev->driver; + + if (drv && drv->pm && drv->pm->complete) + drv->pm->complete(dev); +} + +#ifdef CONFIG_SUSPEND + +static int ibmebus_bus_pm_suspend(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (!drv) + return 0; + + if (drv->pm) { + if (drv->pm->suspend) + ret = drv->pm->suspend(dev); + } else { + ret = ibmebus_bus_legacy_suspend(dev, PMSG_SUSPEND); + } + + return ret; +} + +static int ibmebus_bus_pm_suspend_noirq(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (!drv) + return 0; + + if (drv->pm) { + if (drv->pm->suspend_noirq) + ret = drv->pm->suspend_noirq(dev); + } + + return ret; +} + +static int ibmebus_bus_pm_resume(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (!drv) + return 0; + + if (drv->pm) { + if (drv->pm->resume) + ret = drv->pm->resume(dev); + } else { + ret = ibmebus_bus_legacy_resume(dev); + } + + return ret; +} + +static int ibmebus_bus_pm_resume_noirq(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (!drv) + return 0; + + if (drv->pm) { + if (drv->pm->resume_noirq) + ret = drv->pm->resume_noirq(dev); + } + + return ret; +} + +#else /* !CONFIG_SUSPEND */ + +#define ibmebus_bus_pm_suspend NULL +#define ibmebus_bus_pm_resume NULL +#define ibmebus_bus_pm_suspend_noirq NULL +#define ibmebus_bus_pm_resume_noirq NULL + +#endif /* !CONFIG_SUSPEND */ + +#ifdef CONFIG_HIBERNATION + +static int ibmebus_bus_pm_freeze(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (!drv) + return 0; + + if (drv->pm) { + if (drv->pm->freeze) + ret = drv->pm->freeze(dev); + } else { + ret = ibmebus_bus_legacy_suspend(dev, PMSG_FREEZE); + } + + return ret; +} + +static int ibmebus_bus_pm_freeze_noirq(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (!drv) + return 0; + + if (drv->pm) { + if (drv->pm->freeze_noirq) + ret = drv->pm->freeze_noirq(dev); + } + + return ret; +} + +static int ibmebus_bus_pm_thaw(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (!drv) + return 0; + + if (drv->pm) { + if (drv->pm->thaw) + ret = drv->pm->thaw(dev); + } else { + ret = ibmebus_bus_legacy_resume(dev); + } + + return ret; +} + +static int ibmebus_bus_pm_thaw_noirq(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (!drv) + return 0; + + if (drv->pm) { + if (drv->pm->thaw_noirq) + ret = drv->pm->thaw_noirq(dev); + } + + return ret; +} + +static int ibmebus_bus_pm_poweroff(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (!drv) + return 0; + + if (drv->pm) { + if (drv->pm->poweroff) + ret = drv->pm->poweroff(dev); + } else { + ret = ibmebus_bus_legacy_suspend(dev, PMSG_HIBERNATE); + } + + return ret; +} + +static int ibmebus_bus_pm_poweroff_noirq(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (!drv) + return 0; + + if (drv->pm) { + if (drv->pm->poweroff_noirq) + ret = drv->pm->poweroff_noirq(dev); + } + + return ret; +} + +static int ibmebus_bus_pm_restore(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (!drv) + return 0; + + if (drv->pm) { + if (drv->pm->restore) + ret = drv->pm->restore(dev); + } else { + ret = ibmebus_bus_legacy_resume(dev); + } + + return ret; +} + +static int ibmebus_bus_pm_restore_noirq(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (!drv) + return 0; + + if (drv->pm) { + if (drv->pm->restore_noirq) + ret = drv->pm->restore_noirq(dev); + } + + return ret; +} + +#else /* !CONFIG_HIBERNATION */ + +#define ibmebus_bus_pm_freeze NULL +#define ibmebus_bus_pm_thaw NULL +#define ibmebus_bus_pm_poweroff NULL +#define ibmebus_bus_pm_restore NULL +#define ibmebus_bus_pm_freeze_noirq NULL +#define ibmebus_bus_pm_thaw_noirq NULL +#define ibmebus_bus_pm_poweroff_noirq NULL +#define ibmebus_bus_pm_restore_noirq NULL + +#endif /* !CONFIG_HIBERNATION */ + +static struct dev_pm_ops ibmebus_bus_dev_pm_ops = { + .prepare = ibmebus_bus_pm_prepare, + .complete = ibmebus_bus_pm_complete, + .suspend = ibmebus_bus_pm_suspend, + .resume = ibmebus_bus_pm_resume, + .freeze = ibmebus_bus_pm_freeze, + .thaw = ibmebus_bus_pm_thaw, + .poweroff = ibmebus_bus_pm_poweroff, + .restore = ibmebus_bus_pm_restore, + .suspend_noirq = ibmebus_bus_pm_suspend_noirq, + .resume_noirq = ibmebus_bus_pm_resume_noirq, + .freeze_noirq = ibmebus_bus_pm_freeze_noirq, + .thaw_noirq = ibmebus_bus_pm_thaw_noirq, + .poweroff_noirq = ibmebus_bus_pm_poweroff_noirq, + .restore_noirq = ibmebus_bus_pm_restore_noirq, +}; + +#define IBMEBUS_BUS_PM_OPS_PTR (&ibmebus_bus_dev_pm_ops) + +#else /* !CONFIG_PM_SLEEP */ + +#define IBMEBUS_BUS_PM_OPS_PTR NULL + +#endif /* !CONFIG_PM_SLEEP */ + struct bus_type ibmebus_bus_type = { + .name = "ibmebus", .uevent = of_device_uevent, - .bus_attrs = ibmebus_bus_attrs + .bus_attrs = ibmebus_bus_attrs, + .match = ibmebus_bus_bus_match, + .probe = ibmebus_bus_device_probe, + .remove = ibmebus_bus_device_remove, + .shutdown = ibmebus_bus_device_shutdown, + .dev_attrs = ibmebus_bus_device_attrs, + .pm = IBMEBUS_BUS_PM_OPS_PTR, }; EXPORT_SYMBOL(ibmebus_bus_type); @@ -326,7 +722,7 @@ static int __init ibmebus_bus_init(void) printk(KERN_INFO "IBM eBus Device Driver\n"); - err = of_bus_type_init(&ibmebus_bus_type, "ibmebus"); + err = bus_register(&ibmebus_bus_type); if (err) { printk(KERN_ERR "%s: failed to register IBM eBus.\n", __func__); -- cgit v1.2.3-18-g5258 From 000061245a6797d542854106463b6b20fbdcb12e Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Tue, 22 Feb 2011 19:59:54 -0700 Subject: dt/powerpc: Eliminate users of of_platform_{,un}register_driver Get rid of old users of of_platform_driver in arch/powerpc. Most of_platform_driver users can be converted to use the platform_bus directly. Signed-off-by: Grant Likely --- arch/powerpc/kernel/of_platform.c | 7 +++---- arch/powerpc/platforms/52xx/mpc52xx_gpio.c | 14 ++++++-------- arch/powerpc/platforms/52xx/mpc52xx_gpt.c | 10 +++------- arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c | 11 ++++------- arch/powerpc/platforms/82xx/ep8248e.c | 7 +++---- arch/powerpc/platforms/83xx/suspend.c | 14 +++++++++----- arch/powerpc/platforms/cell/axon_msi.c | 11 ++++------- arch/powerpc/platforms/pasemi/gpio_mdio.c | 9 ++++----- arch/powerpc/sysdev/axonram.c | 11 +++++------ arch/powerpc/sysdev/bestcomm/bestcomm.c | 9 ++++----- arch/powerpc/sysdev/fsl_85xx_l2ctlr.c | 9 ++++----- arch/powerpc/sysdev/fsl_msi.c | 13 ++++++++----- arch/powerpc/sysdev/fsl_pmc.c | 7 +++---- arch/powerpc/sysdev/fsl_rio.c | 7 +++---- arch/powerpc/sysdev/pmi.c | 9 ++++----- arch/powerpc/sysdev/qe_lib/qe.c | 7 +++---- 16 files changed, 70 insertions(+), 85 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c index 9bd951c6776..24582181b6e 100644 --- a/arch/powerpc/kernel/of_platform.c +++ b/arch/powerpc/kernel/of_platform.c @@ -36,8 +36,7 @@ * lacking some bits needed here. */ -static int __devinit of_pci_phb_probe(struct platform_device *dev, - const struct of_device_id *match) +static int __devinit of_pci_phb_probe(struct platform_device *dev) { struct pci_controller *phb; @@ -104,7 +103,7 @@ static struct of_device_id of_pci_phb_ids[] = { {} }; -static struct of_platform_driver of_pci_phb_driver = { +static struct platform_driver of_pci_phb_driver = { .probe = of_pci_phb_probe, .driver = { .name = "of-pci", @@ -115,7 +114,7 @@ static struct of_platform_driver of_pci_phb_driver = { static __init int of_pci_phb_init(void) { - return of_register_platform_driver(&of_pci_phb_driver); + return platform_driver_register(&of_pci_phb_driver); } device_initcall(of_pci_phb_init); diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpio.c b/arch/powerpc/platforms/52xx/mpc52xx_gpio.c index 0dad9a935eb..1757d1db4b5 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_gpio.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_gpio.c @@ -147,8 +147,7 @@ mpc52xx_wkup_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) return 0; } -static int __devinit mpc52xx_wkup_gpiochip_probe(struct platform_device *ofdev, - const struct of_device_id *match) +static int __devinit mpc52xx_wkup_gpiochip_probe(struct platform_device *ofdev) { struct mpc52xx_gpiochip *chip; struct mpc52xx_gpio_wkup __iomem *regs; @@ -191,7 +190,7 @@ static const struct of_device_id mpc52xx_wkup_gpiochip_match[] = { {} }; -static struct of_platform_driver mpc52xx_wkup_gpiochip_driver = { +static struct platform_driver mpc52xx_wkup_gpiochip_driver = { .driver = { .name = "gpio_wkup", .owner = THIS_MODULE, @@ -310,8 +309,7 @@ mpc52xx_simple_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) return 0; } -static int __devinit mpc52xx_simple_gpiochip_probe(struct platform_device *ofdev, - const struct of_device_id *match) +static int __devinit mpc52xx_simple_gpiochip_probe(struct platform_device *ofdev) { struct mpc52xx_gpiochip *chip; struct gpio_chip *gc; @@ -349,7 +347,7 @@ static const struct of_device_id mpc52xx_simple_gpiochip_match[] = { {} }; -static struct of_platform_driver mpc52xx_simple_gpiochip_driver = { +static struct platform_driver mpc52xx_simple_gpiochip_driver = { .driver = { .name = "gpio", .owner = THIS_MODULE, @@ -361,10 +359,10 @@ static struct of_platform_driver mpc52xx_simple_gpiochip_driver = { static int __init mpc52xx_gpio_init(void) { - if (of_register_platform_driver(&mpc52xx_wkup_gpiochip_driver)) + if (platform_driver_register(&mpc52xx_wkup_gpiochip_driver)) printk(KERN_ERR "Unable to register wakeup GPIO driver\n"); - if (of_register_platform_driver(&mpc52xx_simple_gpiochip_driver)) + if (platform_driver_register(&mpc52xx_simple_gpiochip_driver)) printk(KERN_ERR "Unable to register simple GPIO driver\n"); return 0; diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c index e0d703c7fdf..859abf1c6d4 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c @@ -721,8 +721,7 @@ static inline int mpc52xx_gpt_wdt_setup(struct mpc52xx_gpt_priv *gpt, /* --------------------------------------------------------------------- * of_platform bus binding code */ -static int __devinit mpc52xx_gpt_probe(struct platform_device *ofdev, - const struct of_device_id *match) +static int __devinit mpc52xx_gpt_probe(struct platform_device *ofdev) { struct mpc52xx_gpt_priv *gpt; @@ -781,7 +780,7 @@ static const struct of_device_id mpc52xx_gpt_match[] = { {} }; -static struct of_platform_driver mpc52xx_gpt_driver = { +static struct platform_driver mpc52xx_gpt_driver = { .driver = { .name = "mpc52xx-gpt", .owner = THIS_MODULE, @@ -793,10 +792,7 @@ static struct of_platform_driver mpc52xx_gpt_driver = { static int __init mpc52xx_gpt_init(void) { - if (of_register_platform_driver(&mpc52xx_gpt_driver)) - pr_err("error registering MPC52xx GPT driver\n"); - - return 0; + return platform_driver_register(&mpc52xx_gpt_driver); } /* Make sure GPIOs and IRQs get set up before anyone tries to use them */ diff --git a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c index f4ac213c89c..6385d883cb8 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c @@ -436,8 +436,7 @@ void mpc52xx_lpbfifo_abort(struct mpc52xx_lpbfifo_request *req) } EXPORT_SYMBOL(mpc52xx_lpbfifo_abort); -static int __devinit mpc52xx_lpbfifo_probe(struct platform_device *op, - const struct of_device_id *match) +static int __devinit mpc52xx_lpbfifo_probe(struct platform_device *op) { struct resource res; int rc = -ENOMEM; @@ -536,7 +535,7 @@ static struct of_device_id mpc52xx_lpbfifo_match[] __devinitconst = { {}, }; -static struct of_platform_driver mpc52xx_lpbfifo_driver = { +static struct platform_driver mpc52xx_lpbfifo_driver = { .driver = { .name = "mpc52xx-lpbfifo", .owner = THIS_MODULE, @@ -551,14 +550,12 @@ static struct of_platform_driver mpc52xx_lpbfifo_driver = { */ static int __init mpc52xx_lpbfifo_init(void) { - pr_debug("Registering LocalPlus bus FIFO driver\n"); - return of_register_platform_driver(&mpc52xx_lpbfifo_driver); + return platform_driver_register(&mpc52xx_lpbfifo_driver); } module_init(mpc52xx_lpbfifo_init); static void __exit mpc52xx_lpbfifo_exit(void) { - pr_debug("Unregistering LocalPlus bus FIFO driver\n"); - of_unregister_platform_driver(&mpc52xx_lpbfifo_driver); + platform_driver_unregister(&mpc52xx_lpbfifo_driver); } module_exit(mpc52xx_lpbfifo_exit); diff --git a/arch/powerpc/platforms/82xx/ep8248e.c b/arch/powerpc/platforms/82xx/ep8248e.c index 1565e0446dc..10ff526cd04 100644 --- a/arch/powerpc/platforms/82xx/ep8248e.c +++ b/arch/powerpc/platforms/82xx/ep8248e.c @@ -111,8 +111,7 @@ static struct mdiobb_ctrl ep8248e_mdio_ctrl = { .ops = &ep8248e_mdio_ops, }; -static int __devinit ep8248e_mdio_probe(struct platform_device *ofdev, - const struct of_device_id *match) +static int __devinit ep8248e_mdio_probe(struct platform_device *ofdev) { struct mii_bus *bus; struct resource res; @@ -167,7 +166,7 @@ static const struct of_device_id ep8248e_mdio_match[] = { {}, }; -static struct of_platform_driver ep8248e_mdio_driver = { +static struct platform_driver ep8248e_mdio_driver = { .driver = { .name = "ep8248e-mdio-bitbang", .owner = THIS_MODULE, @@ -308,7 +307,7 @@ static __initdata struct of_device_id of_bus_ids[] = { static int __init declare_of_platform_devices(void) { of_platform_bus_probe(NULL, of_bus_ids, NULL); - of_register_platform_driver(&ep8248e_mdio_driver); + platform_driver_register(&ep8248e_mdio_driver); return 0; } diff --git a/arch/powerpc/platforms/83xx/suspend.c b/arch/powerpc/platforms/83xx/suspend.c index fd4f2f2f19e..188272934cf 100644 --- a/arch/powerpc/platforms/83xx/suspend.c +++ b/arch/powerpc/platforms/83xx/suspend.c @@ -318,14 +318,18 @@ static const struct platform_suspend_ops mpc83xx_suspend_ops = { .end = mpc83xx_suspend_end, }; -static int pmc_probe(struct platform_device *ofdev, - const struct of_device_id *match) +static int pmc_probe(struct platform_device *ofdev) { struct device_node *np = ofdev->dev.of_node; struct resource res; - struct pmc_type *type = match->data; + struct pmc_type *type; int ret = 0; + if (!ofdev->dev.of_match) + return -EINVAL; + + type = ofdev->dev.of_match->data; + if (!of_device_is_available(np)) return -ENODEV; @@ -422,7 +426,7 @@ static struct of_device_id pmc_match[] = { {} }; -static struct of_platform_driver pmc_driver = { +static struct platform_driver pmc_driver = { .driver = { .name = "mpc83xx-pmc", .owner = THIS_MODULE, @@ -434,7 +438,7 @@ static struct of_platform_driver pmc_driver = { static int pmc_init(void) { - return of_register_platform_driver(&pmc_driver); + return platform_driver_register(&pmc_driver); } module_init(pmc_init); diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c index e3e379c6caa..c35099af340 100644 --- a/arch/powerpc/platforms/cell/axon_msi.c +++ b/arch/powerpc/platforms/cell/axon_msi.c @@ -328,7 +328,7 @@ static struct irq_host_ops msic_host_ops = { .map = msic_host_map, }; -static int axon_msi_shutdown(struct platform_device *device) +static void axon_msi_shutdown(struct platform_device *device) { struct axon_msic *msic = dev_get_drvdata(&device->dev); u32 tmp; @@ -338,12 +338,9 @@ static int axon_msi_shutdown(struct platform_device *device) tmp = dcr_read(msic->dcr_host, MSIC_CTRL_REG); tmp &= ~MSIC_CTRL_ENABLE & ~MSIC_CTRL_IRQ_ENABLE; msic_dcr_write(msic, MSIC_CTRL_REG, tmp); - - return 0; } -static int axon_msi_probe(struct platform_device *device, - const struct of_device_id *device_id) +static int axon_msi_probe(struct platform_device *device) { struct device_node *dn = device->dev.of_node; struct axon_msic *msic; @@ -446,7 +443,7 @@ static const struct of_device_id axon_msi_device_id[] = { {} }; -static struct of_platform_driver axon_msi_driver = { +static struct platform_driver axon_msi_driver = { .probe = axon_msi_probe, .shutdown = axon_msi_shutdown, .driver = { @@ -458,7 +455,7 @@ static struct of_platform_driver axon_msi_driver = { static int __init axon_msi_init(void) { - return of_register_platform_driver(&axon_msi_driver); + return platform_driver_register(&axon_msi_driver); } subsys_initcall(axon_msi_init); diff --git a/arch/powerpc/platforms/pasemi/gpio_mdio.c b/arch/powerpc/platforms/pasemi/gpio_mdio.c index a5d907b5a4c..9886296e08d 100644 --- a/arch/powerpc/platforms/pasemi/gpio_mdio.c +++ b/arch/powerpc/platforms/pasemi/gpio_mdio.c @@ -216,8 +216,7 @@ static int gpio_mdio_reset(struct mii_bus *bus) } -static int __devinit gpio_mdio_probe(struct platform_device *ofdev, - const struct of_device_id *match) +static int __devinit gpio_mdio_probe(struct platform_device *ofdev) { struct device *dev = &ofdev->dev; struct device_node *np = ofdev->dev.of_node; @@ -299,7 +298,7 @@ static struct of_device_id gpio_mdio_match[] = }; MODULE_DEVICE_TABLE(of, gpio_mdio_match); -static struct of_platform_driver gpio_mdio_driver = +static struct platform_driver gpio_mdio_driver = { .probe = gpio_mdio_probe, .remove = gpio_mdio_remove, @@ -326,13 +325,13 @@ int gpio_mdio_init(void) if (!gpio_regs) return -ENODEV; - return of_register_platform_driver(&gpio_mdio_driver); + return platform_driver_register(&gpio_mdio_driver); } module_init(gpio_mdio_init); void gpio_mdio_exit(void) { - of_unregister_platform_driver(&gpio_mdio_driver); + platform_driver_unregister(&gpio_mdio_driver); if (gpio_regs) iounmap(gpio_regs); } diff --git a/arch/powerpc/sysdev/axonram.c b/arch/powerpc/sysdev/axonram.c index 2659a60bd7b..27402c7d309 100644 --- a/arch/powerpc/sysdev/axonram.c +++ b/arch/powerpc/sysdev/axonram.c @@ -172,10 +172,9 @@ static const struct block_device_operations axon_ram_devops = { /** * axon_ram_probe - probe() method for platform driver - * @device, @device_id: see of_platform_driver method + * @device: see platform_driver method */ -static int axon_ram_probe(struct platform_device *device, - const struct of_device_id *device_id) +static int axon_ram_probe(struct platform_device *device) { static int axon_ram_bank_id = -1; struct axon_ram_bank *bank; @@ -326,7 +325,7 @@ static struct of_device_id axon_ram_device_id[] = { {} }; -static struct of_platform_driver axon_ram_driver = { +static struct platform_driver axon_ram_driver = { .probe = axon_ram_probe, .remove = axon_ram_remove, .driver = { @@ -350,7 +349,7 @@ axon_ram_init(void) } azfs_minor = 0; - return of_register_platform_driver(&axon_ram_driver); + return platform_driver_register(&axon_ram_driver); } /** @@ -359,7 +358,7 @@ axon_ram_init(void) static void __exit axon_ram_exit(void) { - of_unregister_platform_driver(&axon_ram_driver); + platform_driver_unregister(&axon_ram_driver); unregister_blkdev(azfs_major, AXON_RAM_DEVICE_NAME); } diff --git a/arch/powerpc/sysdev/bestcomm/bestcomm.c b/arch/powerpc/sysdev/bestcomm/bestcomm.c index 65025611506..b3fbb271be8 100644 --- a/arch/powerpc/sysdev/bestcomm/bestcomm.c +++ b/arch/powerpc/sysdev/bestcomm/bestcomm.c @@ -365,8 +365,7 @@ bcom_engine_cleanup(void) /* OF platform driver */ /* ======================================================================== */ -static int __devinit mpc52xx_bcom_probe(struct platform_device *op, - const struct of_device_id *match) +static int __devinit mpc52xx_bcom_probe(struct platform_device *op) { struct device_node *ofn_sram; struct resource res_bcom; @@ -492,7 +491,7 @@ static struct of_device_id mpc52xx_bcom_of_match[] = { MODULE_DEVICE_TABLE(of, mpc52xx_bcom_of_match); -static struct of_platform_driver mpc52xx_bcom_of_platform_driver = { +static struct platform_driver mpc52xx_bcom_of_platform_driver = { .probe = mpc52xx_bcom_probe, .remove = mpc52xx_bcom_remove, .driver = { @@ -510,13 +509,13 @@ static struct of_platform_driver mpc52xx_bcom_of_platform_driver = { static int __init mpc52xx_bcom_init(void) { - return of_register_platform_driver(&mpc52xx_bcom_of_platform_driver); + return platform_driver_register(&mpc52xx_bcom_of_platform_driver); } static void __exit mpc52xx_bcom_exit(void) { - of_unregister_platform_driver(&mpc52xx_bcom_of_platform_driver); + platform_driver_unregister(&mpc52xx_bcom_of_platform_driver); } /* If we're not a module, we must make sure everything is setup before */ diff --git a/arch/powerpc/sysdev/fsl_85xx_l2ctlr.c b/arch/powerpc/sysdev/fsl_85xx_l2ctlr.c index cc8d6556d79..2b9f0c92532 100644 --- a/arch/powerpc/sysdev/fsl_85xx_l2ctlr.c +++ b/arch/powerpc/sysdev/fsl_85xx_l2ctlr.c @@ -71,8 +71,7 @@ static int __init get_offset_from_cmdline(char *str) __setup("cache-sram-size=", get_size_from_cmdline); __setup("cache-sram-offset=", get_offset_from_cmdline); -static int __devinit mpc85xx_l2ctlr_of_probe(struct platform_device *dev, - const struct of_device_id *match) +static int __devinit mpc85xx_l2ctlr_of_probe(struct platform_device *dev) { long rval; unsigned int rem; @@ -204,7 +203,7 @@ static struct of_device_id mpc85xx_l2ctlr_of_match[] = { {}, }; -static struct of_platform_driver mpc85xx_l2ctlr_of_platform_driver = { +static struct platform_driver mpc85xx_l2ctlr_of_platform_driver = { .driver = { .name = "fsl-l2ctlr", .owner = THIS_MODULE, @@ -216,12 +215,12 @@ static struct of_platform_driver mpc85xx_l2ctlr_of_platform_driver = { static __init int mpc85xx_l2ctlr_of_init(void) { - return of_register_platform_driver(&mpc85xx_l2ctlr_of_platform_driver); + return platform_driver_register(&mpc85xx_l2ctlr_of_platform_driver); } static void __exit mpc85xx_l2ctlr_of_exit(void) { - of_unregister_platform_driver(&mpc85xx_l2ctlr_of_platform_driver); + platform_driver_unregister(&mpc85xx_l2ctlr_of_platform_driver); } subsys_initcall(mpc85xx_l2ctlr_of_init); diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c index 108d76fa8f1..ee6a8a52ac7 100644 --- a/arch/powerpc/sysdev/fsl_msi.c +++ b/arch/powerpc/sysdev/fsl_msi.c @@ -273,8 +273,7 @@ static int fsl_of_msi_remove(struct platform_device *ofdev) return 0; } -static int __devinit fsl_of_msi_probe(struct platform_device *dev, - const struct of_device_id *match) +static int __devinit fsl_of_msi_probe(struct platform_device *dev) { struct fsl_msi *msi; struct resource res; @@ -282,11 +281,15 @@ static int __devinit fsl_of_msi_probe(struct platform_device *dev, int rc; int virt_msir; const u32 *p; - struct fsl_msi_feature *features = match->data; + struct fsl_msi_feature *features; struct fsl_msi_cascade_data *cascade_data = NULL; int len; u32 offset; + if (!dev->dev.of_match) + return -EINVAL; + features = dev->dev.of_match->data; + printk(KERN_DEBUG "Setting up Freescale MSI support\n"); msi = kzalloc(sizeof(struct fsl_msi), GFP_KERNEL); @@ -411,7 +414,7 @@ static const struct of_device_id fsl_of_msi_ids[] = { {} }; -static struct of_platform_driver fsl_of_msi_driver = { +static struct platform_driver fsl_of_msi_driver = { .driver = { .name = "fsl-msi", .owner = THIS_MODULE, @@ -423,7 +426,7 @@ static struct of_platform_driver fsl_of_msi_driver = { static __init int fsl_of_msi_init(void) { - return of_register_platform_driver(&fsl_of_msi_driver); + return platform_driver_register(&fsl_of_msi_driver); } subsys_initcall(fsl_of_msi_init); diff --git a/arch/powerpc/sysdev/fsl_pmc.c b/arch/powerpc/sysdev/fsl_pmc.c index e9381bfefb2..f122e8961d3 100644 --- a/arch/powerpc/sysdev/fsl_pmc.c +++ b/arch/powerpc/sysdev/fsl_pmc.c @@ -58,8 +58,7 @@ static const struct platform_suspend_ops pmc_suspend_ops = { .enter = pmc_suspend_enter, }; -static int pmc_probe(struct platform_device *ofdev, - const struct of_device_id *id) +static int pmc_probe(struct platform_device *ofdev) { pmc_regs = of_iomap(ofdev->dev.of_node, 0); if (!pmc_regs) @@ -76,7 +75,7 @@ static const struct of_device_id pmc_ids[] = { { }, }; -static struct of_platform_driver pmc_driver = { +static struct platform_driver pmc_driver = { .driver = { .name = "fsl-pmc", .owner = THIS_MODULE, @@ -87,6 +86,6 @@ static struct of_platform_driver pmc_driver = { static int __init pmc_init(void) { - return of_register_platform_driver(&pmc_driver); + return platform_driver_register(&pmc_driver); } device_initcall(pmc_init); diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c index 8c6cab01327..3eff2c3a9ad 100644 --- a/arch/powerpc/sysdev/fsl_rio.c +++ b/arch/powerpc/sysdev/fsl_rio.c @@ -1570,8 +1570,7 @@ err_ops: /* The probe function for RapidIO peer-to-peer network. */ -static int __devinit fsl_of_rio_rpn_probe(struct platform_device *dev, - const struct of_device_id *match) +static int __devinit fsl_of_rio_rpn_probe(struct platform_device *dev) { int rc; printk(KERN_INFO "Setting up RapidIO peer-to-peer network %s\n", @@ -1594,7 +1593,7 @@ static const struct of_device_id fsl_of_rio_rpn_ids[] = { {}, }; -static struct of_platform_driver fsl_of_rio_rpn_driver = { +static struct platform_driver fsl_of_rio_rpn_driver = { .driver = { .name = "fsl-of-rio", .owner = THIS_MODULE, @@ -1605,7 +1604,7 @@ static struct of_platform_driver fsl_of_rio_rpn_driver = { static __init int fsl_of_rio_rpn_init(void) { - return of_register_platform_driver(&fsl_of_rio_rpn_driver); + return platform_driver_register(&fsl_of_rio_rpn_driver); } subsys_initcall(fsl_of_rio_rpn_init); diff --git a/arch/powerpc/sysdev/pmi.c b/arch/powerpc/sysdev/pmi.c index 4260f368db5..8ce4fc3d982 100644 --- a/arch/powerpc/sysdev/pmi.c +++ b/arch/powerpc/sysdev/pmi.c @@ -121,8 +121,7 @@ static void pmi_notify_handlers(struct work_struct *work) spin_unlock(&data->handler_spinlock); } -static int pmi_of_probe(struct platform_device *dev, - const struct of_device_id *match) +static int pmi_of_probe(struct platform_device *dev) { struct device_node *np = dev->dev.of_node; int rc; @@ -205,7 +204,7 @@ static int pmi_of_remove(struct platform_device *dev) return 0; } -static struct of_platform_driver pmi_of_platform_driver = { +static struct platform_driver pmi_of_platform_driver = { .probe = pmi_of_probe, .remove = pmi_of_remove, .driver = { @@ -217,13 +216,13 @@ static struct of_platform_driver pmi_of_platform_driver = { static int __init pmi_module_init(void) { - return of_register_platform_driver(&pmi_of_platform_driver); + return platform_driver_register(&pmi_of_platform_driver); } module_init(pmi_module_init); static void __exit pmi_module_exit(void) { - of_unregister_platform_driver(&pmi_of_platform_driver); + platform_driver_unregister(&pmi_of_platform_driver); } module_exit(pmi_module_exit); diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c index 90020de4dcf..904c6cbaf45 100644 --- a/arch/powerpc/sysdev/qe_lib/qe.c +++ b/arch/powerpc/sysdev/qe_lib/qe.c @@ -659,8 +659,7 @@ static int qe_resume(struct platform_device *ofdev) return 0; } -static int qe_probe(struct platform_device *ofdev, - const struct of_device_id *id) +static int qe_probe(struct platform_device *ofdev) { return 0; } @@ -670,7 +669,7 @@ static const struct of_device_id qe_ids[] = { { }, }; -static struct of_platform_driver qe_driver = { +static struct platform_driver qe_driver = { .driver = { .name = "fsl-qe", .owner = THIS_MODULE, @@ -682,7 +681,7 @@ static struct of_platform_driver qe_driver = { static int __init qe_drv_init(void) { - return of_register_platform_driver(&qe_driver); + return platform_driver_register(&qe_driver); } device_initcall(qe_drv_init); #endif /* defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx) */ -- cgit v1.2.3-18-g5258 From 4ebb24f707187196937607c60810d42f7112d7aa Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Tue, 22 Feb 2011 20:01:33 -0700 Subject: dt/sparc: Eliminate users of of_platform_{,un}register_driver Get rid of old users of of_platform_driver in arch/sparc. Most of_platform_driver users can be converted to use the platform_bus directly. Signed-off-by: Grant Likely --- arch/sparc/include/asm/parport.h | 6 +++--- arch/sparc/kernel/apc.c | 7 +++---- arch/sparc/kernel/auxio_64.c | 7 +++---- arch/sparc/kernel/central.c | 14 ++++++-------- arch/sparc/kernel/chmc.c | 19 ++++++++----------- arch/sparc/kernel/pci_fire.c | 7 +++---- arch/sparc/kernel/pci_psycho.c | 7 +++---- arch/sparc/kernel/pci_sabre.c | 9 ++++----- arch/sparc/kernel/pci_schizo.c | 11 ++++++----- arch/sparc/kernel/pci_sun4v.c | 7 +++---- arch/sparc/kernel/pmc.c | 7 +++---- arch/sparc/kernel/power.c | 6 +++--- arch/sparc/kernel/time_32.c | 6 +++--- arch/sparc/kernel/time_64.c | 18 +++++++++--------- 14 files changed, 60 insertions(+), 71 deletions(-) (limited to 'arch') diff --git a/arch/sparc/include/asm/parport.h b/arch/sparc/include/asm/parport.h index aa4c82648d8..cb33608cc68 100644 --- a/arch/sparc/include/asm/parport.h +++ b/arch/sparc/include/asm/parport.h @@ -103,7 +103,7 @@ static inline unsigned int get_dma_residue(unsigned int dmanr) return ebus_dma_residue(&sparc_ebus_dmas[dmanr].info); } -static int __devinit ecpp_probe(struct platform_device *op, const struct of_device_id *match) +static int __devinit ecpp_probe(struct platform_device *op) { unsigned long base = op->resource[0].start; unsigned long config = op->resource[1].start; @@ -235,7 +235,7 @@ static const struct of_device_id ecpp_match[] = { {}, }; -static struct of_platform_driver ecpp_driver = { +static struct platform_driver ecpp_driver = { .driver = { .name = "ecpp", .owner = THIS_MODULE, @@ -247,7 +247,7 @@ static struct of_platform_driver ecpp_driver = { static int parport_pc_find_nonpci_ports(int autoirq, int autodma) { - return of_register_platform_driver(&ecpp_driver); + return platform_driver_register(&ecpp_driver); } #endif /* !(_ASM_SPARC64_PARPORT_H */ diff --git a/arch/sparc/kernel/apc.c b/arch/sparc/kernel/apc.c index 52de4a9424e..f679c57644d 100644 --- a/arch/sparc/kernel/apc.c +++ b/arch/sparc/kernel/apc.c @@ -137,8 +137,7 @@ static const struct file_operations apc_fops = { static struct miscdevice apc_miscdev = { APC_MINOR, APC_DEVNAME, &apc_fops }; -static int __devinit apc_probe(struct platform_device *op, - const struct of_device_id *match) +static int __devinit apc_probe(struct platform_device *op) { int err; @@ -174,7 +173,7 @@ static struct of_device_id __initdata apc_match[] = { }; MODULE_DEVICE_TABLE(of, apc_match); -static struct of_platform_driver apc_driver = { +static struct platform_driver apc_driver = { .driver = { .name = "apc", .owner = THIS_MODULE, @@ -185,7 +184,7 @@ static struct of_platform_driver apc_driver = { static int __init apc_init(void) { - return of_register_platform_driver(&apc_driver); + return platform_driver_register(&apc_driver); } /* This driver is not critical to the boot process diff --git a/arch/sparc/kernel/auxio_64.c b/arch/sparc/kernel/auxio_64.c index 3efd3c5af6a..2abace076c7 100644 --- a/arch/sparc/kernel/auxio_64.c +++ b/arch/sparc/kernel/auxio_64.c @@ -102,8 +102,7 @@ static struct of_device_id __initdata auxio_match[] = { MODULE_DEVICE_TABLE(of, auxio_match); -static int __devinit auxio_probe(struct platform_device *dev, - const struct of_device_id *match) +static int __devinit auxio_probe(struct platform_device *dev) { struct device_node *dp = dev->dev.of_node; unsigned long size; @@ -132,7 +131,7 @@ static int __devinit auxio_probe(struct platform_device *dev, return 0; } -static struct of_platform_driver auxio_driver = { +static struct platform_driver auxio_driver = { .probe = auxio_probe, .driver = { .name = "auxio", @@ -143,7 +142,7 @@ static struct of_platform_driver auxio_driver = { static int __init auxio_init(void) { - return of_register_platform_driver(&auxio_driver); + return platform_driver_register(&auxio_driver); } /* Must be after subsys_initcall() so that busses are probed. Must diff --git a/arch/sparc/kernel/central.c b/arch/sparc/kernel/central.c index cfa2624c533..136d3718a74 100644 --- a/arch/sparc/kernel/central.c +++ b/arch/sparc/kernel/central.c @@ -59,8 +59,7 @@ static int __devinit clock_board_calc_nslots(struct clock_board *p) } } -static int __devinit clock_board_probe(struct platform_device *op, - const struct of_device_id *match) +static int __devinit clock_board_probe(struct platform_device *op) { struct clock_board *p = kzalloc(sizeof(*p), GFP_KERNEL); int err = -ENOMEM; @@ -148,7 +147,7 @@ static struct of_device_id __initdata clock_board_match[] = { {}, }; -static struct of_platform_driver clock_board_driver = { +static struct platform_driver clock_board_driver = { .probe = clock_board_probe, .driver = { .name = "clock_board", @@ -157,8 +156,7 @@ static struct of_platform_driver clock_board_driver = { }, }; -static int __devinit fhc_probe(struct platform_device *op, - const struct of_device_id *match) +static int __devinit fhc_probe(struct platform_device *op) { struct fhc *p = kzalloc(sizeof(*p), GFP_KERNEL); int err = -ENOMEM; @@ -254,7 +252,7 @@ static struct of_device_id __initdata fhc_match[] = { {}, }; -static struct of_platform_driver fhc_driver = { +static struct platform_driver fhc_driver = { .probe = fhc_probe, .driver = { .name = "fhc", @@ -265,8 +263,8 @@ static struct of_platform_driver fhc_driver = { static int __init sunfire_init(void) { - (void) of_register_platform_driver(&fhc_driver); - (void) of_register_platform_driver(&clock_board_driver); + (void) platform_driver_register(&fhc_driver); + (void) platform_driver_register(&clock_board_driver); return 0; } diff --git a/arch/sparc/kernel/chmc.c b/arch/sparc/kernel/chmc.c index 08c466ebb32..668c7be5d36 100644 --- a/arch/sparc/kernel/chmc.c +++ b/arch/sparc/kernel/chmc.c @@ -392,8 +392,7 @@ static void __devinit jbusmc_construct_dimm_groups(struct jbusmc *p, } } -static int __devinit jbusmc_probe(struct platform_device *op, - const struct of_device_id *match) +static int __devinit jbusmc_probe(struct platform_device *op) { const struct linux_prom64_registers *mem_regs; struct device_node *mem_node; @@ -690,8 +689,7 @@ static void chmc_fetch_decode_regs(struct chmc *p) chmc_read_mcreg(p, CHMCTRL_DECODE4)); } -static int __devinit chmc_probe(struct platform_device *op, - const struct of_device_id *match) +static int __devinit chmc_probe(struct platform_device *op) { struct device_node *dp = op->dev.of_node; unsigned long ver; @@ -765,13 +763,12 @@ out_free: goto out; } -static int __devinit us3mc_probe(struct platform_device *op, - const struct of_device_id *match) +static int __devinit us3mc_probe(struct platform_device *op) { if (mc_type == MC_TYPE_SAFARI) - return chmc_probe(op, match); + return chmc_probe(op); else if (mc_type == MC_TYPE_JBUS) - return jbusmc_probe(op, match); + return jbusmc_probe(op); return -ENODEV; } @@ -810,7 +807,7 @@ static const struct of_device_id us3mc_match[] = { }; MODULE_DEVICE_TABLE(of, us3mc_match); -static struct of_platform_driver us3mc_driver = { +static struct platform_driver us3mc_driver = { .driver = { .name = "us3mc", .owner = THIS_MODULE, @@ -848,7 +845,7 @@ static int __init us3mc_init(void) ret = register_dimm_printer(us3mc_dimm_printer); if (!ret) { - ret = of_register_platform_driver(&us3mc_driver); + ret = platform_driver_register(&us3mc_driver); if (ret) unregister_dimm_printer(us3mc_dimm_printer); } @@ -859,7 +856,7 @@ static void __exit us3mc_cleanup(void) { if (us3mc_platform()) { unregister_dimm_printer(us3mc_dimm_printer); - of_unregister_platform_driver(&us3mc_driver); + platform_driver_unregister(&us3mc_driver); } } diff --git a/arch/sparc/kernel/pci_fire.c b/arch/sparc/kernel/pci_fire.c index efb896d6875..be5e2441c6d 100644 --- a/arch/sparc/kernel/pci_fire.c +++ b/arch/sparc/kernel/pci_fire.c @@ -455,8 +455,7 @@ static int __devinit pci_fire_pbm_init(struct pci_pbm_info *pbm, return 0; } -static int __devinit fire_probe(struct platform_device *op, - const struct of_device_id *match) +static int __devinit fire_probe(struct platform_device *op) { struct device_node *dp = op->dev.of_node; struct pci_pbm_info *pbm; @@ -507,7 +506,7 @@ static struct of_device_id __initdata fire_match[] = { {}, }; -static struct of_platform_driver fire_driver = { +static struct platform_driver fire_driver = { .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, @@ -518,7 +517,7 @@ static struct of_platform_driver fire_driver = { static int __init fire_init(void) { - return of_register_platform_driver(&fire_driver); + return platform_driver_register(&fire_driver); } subsys_initcall(fire_init); diff --git a/arch/sparc/kernel/pci_psycho.c b/arch/sparc/kernel/pci_psycho.c index 22eab7cf3b1..56ee745064d 100644 --- a/arch/sparc/kernel/pci_psycho.c +++ b/arch/sparc/kernel/pci_psycho.c @@ -503,8 +503,7 @@ static struct pci_pbm_info * __devinit psycho_find_sibling(u32 upa_portid) #define PSYCHO_CONFIGSPACE 0x001000000UL -static int __devinit psycho_probe(struct platform_device *op, - const struct of_device_id *match) +static int __devinit psycho_probe(struct platform_device *op) { const struct linux_prom64_registers *pr_regs; struct device_node *dp = op->dev.of_node; @@ -601,7 +600,7 @@ static struct of_device_id __initdata psycho_match[] = { {}, }; -static struct of_platform_driver psycho_driver = { +static struct platform_driver psycho_driver = { .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, @@ -612,7 +611,7 @@ static struct of_platform_driver psycho_driver = { static int __init psycho_init(void) { - return of_register_platform_driver(&psycho_driver); + return platform_driver_register(&psycho_driver); } subsys_initcall(psycho_init); diff --git a/arch/sparc/kernel/pci_sabre.c b/arch/sparc/kernel/pci_sabre.c index 5c3f5ec4cab..2857073342d 100644 --- a/arch/sparc/kernel/pci_sabre.c +++ b/arch/sparc/kernel/pci_sabre.c @@ -452,8 +452,7 @@ static void __devinit sabre_pbm_init(struct pci_pbm_info *pbm, sabre_scan_bus(pbm, &op->dev); } -static int __devinit sabre_probe(struct platform_device *op, - const struct of_device_id *match) +static int __devinit sabre_probe(struct platform_device *op) { const struct linux_prom64_registers *pr_regs; struct device_node *dp = op->dev.of_node; @@ -464,7 +463,7 @@ static int __devinit sabre_probe(struct platform_device *op, const u32 *vdma; u64 clear_irq; - hummingbird_p = (match->data != NULL); + hummingbird_p = op->dev.of_match && (op->dev.of_match->data != NULL); if (!hummingbird_p) { struct device_node *cpu_dp; @@ -595,7 +594,7 @@ static struct of_device_id __initdata sabre_match[] = { {}, }; -static struct of_platform_driver sabre_driver = { +static struct platform_driver sabre_driver = { .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, @@ -606,7 +605,7 @@ static struct of_platform_driver sabre_driver = { static int __init sabre_init(void) { - return of_register_platform_driver(&sabre_driver); + return platform_driver_register(&sabre_driver); } subsys_initcall(sabre_init); diff --git a/arch/sparc/kernel/pci_schizo.c b/arch/sparc/kernel/pci_schizo.c index 445a47a2fb3..6783410ceb0 100644 --- a/arch/sparc/kernel/pci_schizo.c +++ b/arch/sparc/kernel/pci_schizo.c @@ -1460,10 +1460,11 @@ out_err: return err; } -static int __devinit schizo_probe(struct platform_device *op, - const struct of_device_id *match) +static int __devinit schizo_probe(struct platform_device *op) { - return __schizo_init(op, (unsigned long) match->data); + if (!op->dev.of_match) + return -EINVAL; + return __schizo_init(op, (unsigned long) op->dev.of_match->data); } /* The ordering of this table is very important. Some Tomatillo @@ -1490,7 +1491,7 @@ static struct of_device_id __initdata schizo_match[] = { {}, }; -static struct of_platform_driver schizo_driver = { +static struct platform_driver schizo_driver = { .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, @@ -1501,7 +1502,7 @@ static struct of_platform_driver schizo_driver = { static int __init schizo_init(void) { - return of_register_platform_driver(&schizo_driver); + return platform_driver_register(&schizo_driver); } subsys_initcall(schizo_init); diff --git a/arch/sparc/kernel/pci_sun4v.c b/arch/sparc/kernel/pci_sun4v.c index 743344aa6d8..158cd739b26 100644 --- a/arch/sparc/kernel/pci_sun4v.c +++ b/arch/sparc/kernel/pci_sun4v.c @@ -918,8 +918,7 @@ static int __devinit pci_sun4v_pbm_init(struct pci_pbm_info *pbm, return 0; } -static int __devinit pci_sun4v_probe(struct platform_device *op, - const struct of_device_id *match) +static int __devinit pci_sun4v_probe(struct platform_device *op) { const struct linux_prom64_registers *regs; static int hvapi_negotiated = 0; @@ -1008,7 +1007,7 @@ static struct of_device_id __initdata pci_sun4v_match[] = { {}, }; -static struct of_platform_driver pci_sun4v_driver = { +static struct platform_driver pci_sun4v_driver = { .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, @@ -1019,7 +1018,7 @@ static struct of_platform_driver pci_sun4v_driver = { static int __init pci_sun4v_init(void) { - return of_register_platform_driver(&pci_sun4v_driver); + return platform_driver_register(&pci_sun4v_driver); } subsys_initcall(pci_sun4v_init); diff --git a/arch/sparc/kernel/pmc.c b/arch/sparc/kernel/pmc.c index 94536a85f16..93d7b4465f8 100644 --- a/arch/sparc/kernel/pmc.c +++ b/arch/sparc/kernel/pmc.c @@ -51,8 +51,7 @@ static void pmc_swift_idle(void) #endif } -static int __devinit pmc_probe(struct platform_device *op, - const struct of_device_id *match) +static int __devinit pmc_probe(struct platform_device *op) { regs = of_ioremap(&op->resource[0], 0, resource_size(&op->resource[0]), PMC_OBPNAME); @@ -78,7 +77,7 @@ static struct of_device_id __initdata pmc_match[] = { }; MODULE_DEVICE_TABLE(of, pmc_match); -static struct of_platform_driver pmc_driver = { +static struct platform_driver pmc_driver = { .driver = { .name = "pmc", .owner = THIS_MODULE, @@ -89,7 +88,7 @@ static struct of_platform_driver pmc_driver = { static int __init pmc_init(void) { - return of_register_platform_driver(&pmc_driver); + return platform_driver_register(&pmc_driver); } /* This driver is not critical to the boot process diff --git a/arch/sparc/kernel/power.c b/arch/sparc/kernel/power.c index 2c59f4d387d..cd725fe238b 100644 --- a/arch/sparc/kernel/power.c +++ b/arch/sparc/kernel/power.c @@ -33,7 +33,7 @@ static int __devinit has_button_interrupt(unsigned int irq, struct device_node * return 1; } -static int __devinit power_probe(struct platform_device *op, const struct of_device_id *match) +static int __devinit power_probe(struct platform_device *op) { struct resource *res = &op->resource[0]; unsigned int irq = op->archdata.irqs[0]; @@ -59,7 +59,7 @@ static struct of_device_id __initdata power_match[] = { {}, }; -static struct of_platform_driver power_driver = { +static struct platform_driver power_driver = { .probe = power_probe, .driver = { .name = "power", @@ -70,7 +70,7 @@ static struct of_platform_driver power_driver = { static int __init power_init(void) { - return of_register_platform_driver(&power_driver); + return platform_driver_register(&power_driver); } device_initcall(power_init); diff --git a/arch/sparc/kernel/time_32.c b/arch/sparc/kernel/time_32.c index 9c743b1886f..23ccd737fc7 100644 --- a/arch/sparc/kernel/time_32.c +++ b/arch/sparc/kernel/time_32.c @@ -142,7 +142,7 @@ static struct platform_device m48t59_rtc = { }, }; -static int __devinit clock_probe(struct platform_device *op, const struct of_device_id *match) +static int __devinit clock_probe(struct platform_device *op) { struct device_node *dp = op->dev.of_node; const char *model = of_get_property(dp, "model", NULL); @@ -176,7 +176,7 @@ static struct of_device_id __initdata clock_match[] = { {}, }; -static struct of_platform_driver clock_driver = { +static struct platform_driver clock_driver = { .probe = clock_probe, .driver = { .name = "rtc", @@ -189,7 +189,7 @@ static struct of_platform_driver clock_driver = { /* Probe for the mostek real time clock chip. */ static int __init clock_init(void) { - return of_register_platform_driver(&clock_driver); + return platform_driver_register(&clock_driver); } /* Must be after subsys_initcall() so that busses are probed. Must * be before device_initcall() because things like the RTC driver diff --git a/arch/sparc/kernel/time_64.c b/arch/sparc/kernel/time_64.c index 3bc9c9979b9..e1862793a61 100644 --- a/arch/sparc/kernel/time_64.c +++ b/arch/sparc/kernel/time_64.c @@ -419,7 +419,7 @@ static struct platform_device rtc_cmos_device = { .num_resources = 1, }; -static int __devinit rtc_probe(struct platform_device *op, const struct of_device_id *match) +static int __devinit rtc_probe(struct platform_device *op) { struct resource *r; @@ -462,7 +462,7 @@ static struct of_device_id __initdata rtc_match[] = { {}, }; -static struct of_platform_driver rtc_driver = { +static struct platform_driver rtc_driver = { .probe = rtc_probe, .driver = { .name = "rtc", @@ -477,7 +477,7 @@ static struct platform_device rtc_bq4802_device = { .num_resources = 1, }; -static int __devinit bq4802_probe(struct platform_device *op, const struct of_device_id *match) +static int __devinit bq4802_probe(struct platform_device *op) { printk(KERN_INFO "%s: BQ4802 regs at 0x%llx\n", @@ -495,7 +495,7 @@ static struct of_device_id __initdata bq4802_match[] = { {}, }; -static struct of_platform_driver bq4802_driver = { +static struct platform_driver bq4802_driver = { .probe = bq4802_probe, .driver = { .name = "bq4802", @@ -534,7 +534,7 @@ static struct platform_device m48t59_rtc = { }, }; -static int __devinit mostek_probe(struct platform_device *op, const struct of_device_id *match) +static int __devinit mostek_probe(struct platform_device *op) { struct device_node *dp = op->dev.of_node; @@ -559,7 +559,7 @@ static struct of_device_id __initdata mostek_match[] = { {}, }; -static struct of_platform_driver mostek_driver = { +static struct platform_driver mostek_driver = { .probe = mostek_probe, .driver = { .name = "mostek", @@ -586,9 +586,9 @@ static int __init clock_init(void) if (tlb_type == hypervisor) return platform_device_register(&rtc_sun4v_device); - (void) of_register_platform_driver(&rtc_driver); - (void) of_register_platform_driver(&mostek_driver); - (void) of_register_platform_driver(&bq4802_driver); + (void) platform_driver_register(&rtc_driver); + (void) platform_driver_register(&mostek_driver); + (void) platform_driver_register(&bq4802_driver); return 0; } -- cgit v1.2.3-18-g5258 From b9ec40af0e18fb7d02106be148036c2ea490fdf9 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Mon, 28 Feb 2011 11:02:24 +0100 Subject: percpu, x86: Add arch-specific this_cpu_cmpxchg_double() support Support this_cpu_cmpxchg_double() using the cmpxchg16b and cmpxchg8b instructions. -tj: s/percpu_cmpxchg16b/percpu_cmpxchg16b_double/ for consistency and other cosmetic changes. Signed-off-by: Christoph Lameter Signed-off-by: Tejun Heo --- arch/x86/include/asm/percpu.h | 48 +++++++++++++++++++++++++++++++++++ arch/x86/lib/Makefile | 1 + arch/x86/lib/cmpxchg16b_emu.S | 59 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 108 insertions(+) create mode 100644 arch/x86/lib/cmpxchg16b_emu.S (limited to 'arch') diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h index 3788f4649db..260ac7af1fd 100644 --- a/arch/x86/include/asm/percpu.h +++ b/arch/x86/include/asm/percpu.h @@ -451,6 +451,26 @@ do { \ #define irqsafe_cpu_cmpxchg_4(pcp, oval, nval) percpu_cmpxchg_op(pcp, oval, nval) #endif /* !CONFIG_M386 */ +#ifdef CONFIG_X86_CMPXCHG64 +#define percpu_cmpxchg8b_double(pcp1, o1, o2, n1, n2) \ +({ \ + char __ret; \ + typeof(o1) __o1 = o1; \ + typeof(o1) __n1 = n1; \ + typeof(o2) __o2 = o2; \ + typeof(o2) __n2 = n2; \ + typeof(o2) __dummy = n2; \ + asm volatile("cmpxchg8b "__percpu_arg(1)"\n\tsetz %0\n\t" \ + : "=a"(__ret), "=m" (pcp1), "=d"(__dummy) \ + : "b"(__n1), "c"(__n2), "a"(__o1), "d"(__o2)); \ + __ret; \ +}) + +#define __this_cpu_cmpxchg_double_4(pcp1, pcp2, o1, o2, n1, n2) percpu_cmpxchg8b_double(pcp1, o1, o2, n1, n2) +#define this_cpu_cmpxchg_double_4(pcp1, pcp2, o1, o2, n1, n2) percpu_cmpxchg8b_double(pcp1, o1, o2, n1, n2) +#define irqsafe_cpu_cmpxchg_double_4(pcp1, pcp2, o1, o2, n1, n2) percpu_cmpxchg8b_double(pcp1, o1, o2, n1, n2) +#endif /* CONFIG_X86_CMPXCHG64 */ + /* * Per cpu atomic 64 bit operations are only available under 64 bit. * 32 bit must fall back to generic operations. @@ -480,6 +500,34 @@ do { \ #define irqsafe_cpu_xor_8(pcp, val) percpu_to_op("xor", (pcp), val) #define irqsafe_cpu_xchg_8(pcp, nval) percpu_xchg_op(pcp, nval) #define irqsafe_cpu_cmpxchg_8(pcp, oval, nval) percpu_cmpxchg_op(pcp, oval, nval) + +/* + * Pretty complex macro to generate cmpxchg16 instruction. The instruction + * is not supported on early AMD64 processors so we must be able to emulate + * it in software. The address used in the cmpxchg16 instruction must be + * aligned to a 16 byte boundary. + */ +#define percpu_cmpxchg16b_double(pcp1, o1, o2, n1, n2) \ +({ \ + char __ret; \ + typeof(o1) __o1 = o1; \ + typeof(o1) __n1 = n1; \ + typeof(o2) __o2 = o2; \ + typeof(o2) __n2 = n2; \ + typeof(o2) __dummy; \ + alternative_io("call this_cpu_cmpxchg16b_emu\n\t" P6_NOP4, \ + "cmpxchg16b %%gs:(%%rsi)\n\tsetz %0\n\t", \ + X86_FEATURE_CX16, \ + ASM_OUTPUT2("=a"(__ret), "=d"(__dummy)), \ + "S" (&pcp1), "b"(__n1), "c"(__n2), \ + "a"(__o1), "d"(__o2)); \ + __ret; \ +}) + +#define __this_cpu_cmpxchg_double_8(pcp1, pcp2, o1, o2, n1, n2) percpu_cmpxchg16b_double(pcp1, o1, o2, n1, n2) +#define this_cpu_cmpxchg_double_8(pcp1, pcp2, o1, o2, n1, n2) percpu_cmpxchg16b_double(pcp1, o1, o2, n1, n2) +#define irqsafe_cpu_cmpxchg_double_8(pcp1, pcp2, o1, o2, n1, n2) percpu_cmpxchg16b_double(pcp1, o1, o2, n1, n2) + #endif /* This is not atomic against other CPUs -- CPU preemption needs to be off */ diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile index e10cf070ede..f2479f19ddd 100644 --- a/arch/x86/lib/Makefile +++ b/arch/x86/lib/Makefile @@ -42,4 +42,5 @@ else lib-y += memmove_64.o memset_64.o lib-y += copy_user_64.o rwlock_64.o copy_user_nocache_64.o lib-$(CONFIG_RWSEM_XCHGADD_ALGORITHM) += rwsem_64.o + lib-y += cmpxchg16b_emu.o endif diff --git a/arch/x86/lib/cmpxchg16b_emu.S b/arch/x86/lib/cmpxchg16b_emu.S new file mode 100644 index 00000000000..3e8b08a6de2 --- /dev/null +++ b/arch/x86/lib/cmpxchg16b_emu.S @@ -0,0 +1,59 @@ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + * + */ +#include +#include +#include +#include + +.text + +/* + * Inputs: + * %rsi : memory location to compare + * %rax : low 64 bits of old value + * %rdx : high 64 bits of old value + * %rbx : low 64 bits of new value + * %rcx : high 64 bits of new value + * %al : Operation successful + */ +ENTRY(this_cpu_cmpxchg16b_emu) +CFI_STARTPROC + +# +# Emulate 'cmpxchg16b %gs:(%rsi)' except we return the result in %al not +# via the ZF. Caller will access %al to get result. +# +# Note that this is only useful for a cpuops operation. Meaning that we +# do *not* have a fully atomic operation but just an operation that is +# *atomic* on a single cpu (as provided by the this_cpu_xx class of +# macros). +# +this_cpu_cmpxchg16b_emu: + pushf + cli + + cmpq %gs:(%rsi), %rax + jne not_same + cmpq %gs:8(%rsi), %rdx + jne not_same + + movq %rbx, %gs:(%rsi) + movq %rcx, %gs:8(%rsi) + + popf + mov $1, %al + ret + + not_same: + popf + xor %al,%al + ret + +CFI_ENDPROC + +ENDPROC(this_cpu_cmpxchg16b_emu) -- cgit v1.2.3-18-g5258 From 5246ae86770d084abff091a6090ca82bde8e2083 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 28 Feb 2011 20:22:58 +0900 Subject: ARM: S3C2440: Remove state_mem constraints for the pcf50633 regulators on GTA02 The pcf50633 regulator driver does not use the state_mem constraints, so there is no use in setting them. Signed-off-by: Lars-Peter Clausen Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c2440/mach-gta02.c | 15 --------------- 1 file changed, 15 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c index 66004212380..2682592ede5 100644 --- a/arch/arm/mach-s3c2440/mach-gta02.c +++ b/arch/arm/mach-s3c2440/mach-gta02.c @@ -283,9 +283,6 @@ struct pcf50633_platform_data gta02_pcf_pdata = { .valid_modes_mask = REGULATOR_MODE_NORMAL, .always_on = 1, .apply_uV = 1, - .state_mem = { - .enabled = 1, - }, }, }, [PCF50633_REGULATOR_DOWN1] = { @@ -304,9 +301,6 @@ struct pcf50633_platform_data gta02_pcf_pdata = { .valid_modes_mask = REGULATOR_MODE_NORMAL, .apply_uV = 1, .always_on = 1, - .state_mem = { - .enabled = 1, - }, }, }, [PCF50633_REGULATOR_HCLDO] = { @@ -325,9 +319,6 @@ struct pcf50633_platform_data gta02_pcf_pdata = { .valid_modes_mask = REGULATOR_MODE_NORMAL, .valid_ops_mask = REGULATOR_CHANGE_STATUS, .apply_uV = 1, - .state_mem = { - .enabled = 0, - }, }, }, [PCF50633_REGULATOR_LDO2] = { @@ -362,9 +353,6 @@ struct pcf50633_platform_data gta02_pcf_pdata = { .valid_modes_mask = REGULATOR_MODE_NORMAL, .valid_ops_mask = REGULATOR_CHANGE_STATUS, .apply_uV = 1, - .state_mem = { - .enabled = 1, - }, }, }, [PCF50633_REGULATOR_LDO6] = { @@ -379,9 +367,6 @@ struct pcf50633_platform_data gta02_pcf_pdata = { .min_uV = 1800000, .max_uV = 1800000, .valid_modes_mask = REGULATOR_MODE_NORMAL, - .state_mem = { - .enabled = 1, - }, }, }, -- cgit v1.2.3-18-g5258 From d73af18330ca5c17e03d36d436b5642ae764467f Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 28 Feb 2011 20:26:36 +0900 Subject: ARM: S3C2440: Add touchscreen support on GTA02 This patch adds registers the s3c touchscreen and adc devices to add touchscreen support for the gta02. Signed-off-by: Lars-Peter Clausen Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c2440/mach-gta02.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c index 2682592ede5..d217ef3cd86 100644 --- a/arch/arm/mach-s3c2440/mach-gta02.c +++ b/arch/arm/mach-s3c2440/mach-gta02.c @@ -89,6 +89,8 @@ #include #include #include +#include + static struct pcf50633 *gta02_pcf; @@ -480,6 +482,13 @@ static struct s3c2410_hcd_info gta02_usb_info __initdata = { }, }; +/* Touchscreen */ +static struct s3c2410_ts_mach_info gta02_ts_info = { + .delay = 10000, + .presc = 0xff, /* slow as we can go */ + .oversampling_shift = 2, +}; + /* Buttons */ static struct gpio_keys_button gta02_buttons[] = { { @@ -533,6 +542,8 @@ static struct platform_device *gta02_devices[] __initdata = { &samsung_asoc_dma, &s3c_device_i2c0, >a02_buttons_device, + &s3c_device_adc, + &s3c_device_ts, }; /* These guys DO need to be children of PMU. */ @@ -582,6 +593,7 @@ static void __init gta02_machine_init(void) #endif s3c24xx_udc_set_platdata(>a02_udc_cfg); + s3c24xx_ts_set_platdata(>a02_ts_info); s3c_ohci_set_platdata(>a02_usb_info); s3c_nand_set_platdata(>a02_nand_info); s3c_i2c0_set_platdata(NULL); -- cgit v1.2.3-18-g5258 From ad849a223f912bfd6c666e0414d0ff368a9dc1a7 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Mon, 28 Feb 2011 20:35:33 +0900 Subject: ARM: EXYNOS4: Fix wrong constants in the hotplug assembly code. This patch fixes wrong constants in the hotplug assembly code for Exynos4 such as Russell's changing in vexpress hotplug and fixes hard-coded control register constatns also. Reported-by: Changhwan Youn Cc: Russell King Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos4/hotplug.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-exynos4/hotplug.c b/arch/arm/mach-exynos4/hotplug.c index 4c42f9ce1c5..2b5909e2ccd 100644 --- a/arch/arm/mach-exynos4/hotplug.c +++ b/arch/arm/mach-exynos4/hotplug.c @@ -30,13 +30,13 @@ static inline void cpu_enter_lowpower(void) * Turn off coherency */ " mrc p15, 0, %0, c1, c0, 1\n" - " bic %0, %0, #0x20\n" + " bic %0, %0, %3\n" " mcr p15, 0, %0, c1, c0, 1\n" " mrc p15, 0, %0, c1, c0, 0\n" " bic %0, %0, %2\n" " mcr p15, 0, %0, c1, c0, 0\n" : "=&r" (v) - : "r" (0), "Ir" (CR_C) + : "r" (0), "Ir" (CR_C), "Ir" (0x40) : "cc"); } @@ -49,10 +49,10 @@ static inline void cpu_leave_lowpower(void) " orr %0, %0, %1\n" " mcr p15, 0, %0, c1, c0, 0\n" " mrc p15, 0, %0, c1, c0, 1\n" - " orr %0, %0, #0x20\n" + " orr %0, %0, %2\n" " mcr p15, 0, %0, c1, c0, 1\n" : "=&r" (v) - : "Ir" (CR_C) + : "Ir" (CR_C), "Ir" (0x40) : "cc"); } -- cgit v1.2.3-18-g5258 From 299c56966a72b9109d47c71a6db52097098703dd Mon Sep 17 00:00:00 2001 From: Don Zickus Date: Mon, 7 Feb 2011 23:25:00 -0500 Subject: x86: Use u32 instead of long to set reset vector back to 0 A customer of ours, complained that when setting the reset vector back to 0, it trashed other data and hung their box. They noticed when only 4 bytes were set to 0 instead of 8, everything worked correctly. Mathew pointed out: | | We're supposed to be resetting trampoline_phys_low and | trampoline_phys_high here, which are two 16-bit values. | Writing 64 bits is definitely going to overwrite space | that we're not supposed to be touching. | So limit the area modified to u32. Signed-off-by: Don Zickus Acked-by: Matthew Garrett Cc: LKML-Reference: <1297139100-424-1-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/smpboot_hooks.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/include/asm/smpboot_hooks.h b/arch/x86/include/asm/smpboot_hooks.h index 6c22bf353f2..725b7783199 100644 --- a/arch/x86/include/asm/smpboot_hooks.h +++ b/arch/x86/include/asm/smpboot_hooks.h @@ -34,7 +34,7 @@ static inline void smpboot_restore_warm_reset_vector(void) */ CMOS_WRITE(0, 0xf); - *((volatile long *)phys_to_virt(apic->trampoline_phys_low)) = 0; + *((volatile u32 *)phys_to_virt(apic->trampoline_phys_low)) = 0; } static inline void __init smpboot_setup_io_apic(void) -- cgit v1.2.3-18-g5258 From 39f2205e1abd1b6fffdaf45e1f1c3049a5f8999c Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 28 Feb 2011 15:31:59 +0000 Subject: x86-64: Add CFI annotations to lib/rwsem_64.S These weren't part of the initial commit of this code. Signed-off-by: Jan Beulich Cc: Alexander van Heukelum LKML-Reference: <4D6BCDFF02000078000341B0@vpn.id2.novell.com> Signed-off-by: Ingo Molnar --- arch/x86/lib/rwsem_64.S | 56 ++++++++++++++++++++++++++++++------------------- 1 file changed, 34 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/x86/lib/rwsem_64.S b/arch/x86/lib/rwsem_64.S index 41fcf00e49d..67743977398 100644 --- a/arch/x86/lib/rwsem_64.S +++ b/arch/x86/lib/rwsem_64.S @@ -23,43 +23,50 @@ #include #define save_common_regs \ - pushq %rdi; \ - pushq %rsi; \ - pushq %rcx; \ - pushq %r8; \ - pushq %r9; \ - pushq %r10; \ - pushq %r11 + pushq_cfi %rdi; CFI_REL_OFFSET rdi, 0; \ + pushq_cfi %rsi; CFI_REL_OFFSET rsi, 0; \ + pushq_cfi %rcx; CFI_REL_OFFSET rcx, 0; \ + pushq_cfi %r8; CFI_REL_OFFSET r8, 0; \ + pushq_cfi %r9; CFI_REL_OFFSET r9, 0; \ + pushq_cfi %r10; CFI_REL_OFFSET r10, 0; \ + pushq_cfi %r11; CFI_REL_OFFSET r11, 0 #define restore_common_regs \ - popq %r11; \ - popq %r10; \ - popq %r9; \ - popq %r8; \ - popq %rcx; \ - popq %rsi; \ - popq %rdi + popq_cfi %r11; CFI_RESTORE r11; \ + popq_cfi %r10; CFI_RESTORE r10; \ + popq_cfi %r9; CFI_RESTORE r9; \ + popq_cfi %r8; CFI_RESTORE r8; \ + popq_cfi %rcx; CFI_RESTORE rcx; \ + popq_cfi %rsi; CFI_RESTORE rsi; \ + popq_cfi %rdi; CFI_RESTORE rdi /* Fix up special calling conventions */ ENTRY(call_rwsem_down_read_failed) + CFI_STARTPROC save_common_regs - pushq %rdx + pushq_cfi %rdx + CFI_REL_OFFSET rdx, 0 movq %rax,%rdi call rwsem_down_read_failed - popq %rdx + popq_cfi %rdx + CFI_RESTORE rdx restore_common_regs ret - ENDPROC(call_rwsem_down_read_failed) + CFI_ENDPROC +ENDPROC(call_rwsem_down_read_failed) ENTRY(call_rwsem_down_write_failed) + CFI_STARTPROC save_common_regs movq %rax,%rdi call rwsem_down_write_failed restore_common_regs ret - ENDPROC(call_rwsem_down_write_failed) + CFI_ENDPROC +ENDPROC(call_rwsem_down_write_failed) ENTRY(call_rwsem_wake) + CFI_STARTPROC decl %edx /* do nothing if still outstanding active readers */ jnz 1f save_common_regs @@ -67,15 +74,20 @@ ENTRY(call_rwsem_wake) call rwsem_wake restore_common_regs 1: ret - ENDPROC(call_rwsem_wake) + CFI_ENDPROC +ENDPROC(call_rwsem_wake) /* Fix up special calling conventions */ ENTRY(call_rwsem_downgrade_wake) + CFI_STARTPROC save_common_regs - pushq %rdx + pushq_cfi %rdx + CFI_REL_OFFSET rdx, 0 movq %rax,%rdi call rwsem_downgrade_wake - popq %rdx + popq_cfi %rdx + CFI_RESTORE rdx restore_common_regs ret - ENDPROC(call_rwsem_downgrade_wake) + CFI_ENDPROC +ENDPROC(call_rwsem_downgrade_wake) -- cgit v1.2.3-18-g5258 From 60cf637a13932a4750da6746efd0199e8a4c341b Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 28 Feb 2011 15:54:40 +0000 Subject: x86: Use {push,pop}_cfi in more places Cleaning up and shortening code... Signed-off-by: Jan Beulich Cc: Alexander van Heukelum LKML-Reference: <4D6BD35002000078000341DA@vpn.id2.novell.com> Signed-off-by: Ingo Molnar --- arch/x86/ia32/ia32entry.S | 27 ++++++------------ arch/x86/include/asm/frame.h | 6 ++-- arch/x86/kernel/entry_32.S | 3 +- arch/x86/lib/atomic64_386_32.S | 6 ++-- arch/x86/lib/atomic64_cx8_32.S | 6 ++-- arch/x86/lib/checksum_32.S | 63 ++++++++++++++---------------------------- arch/x86/lib/semaphore_32.S | 36 ++++++++---------------- 7 files changed, 49 insertions(+), 98 deletions(-) (limited to 'arch') diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S index 518bb99c339..7c6aabd01fc 100644 --- a/arch/x86/ia32/ia32entry.S +++ b/arch/x86/ia32/ia32entry.S @@ -126,26 +126,20 @@ ENTRY(ia32_sysenter_target) */ ENABLE_INTERRUPTS(CLBR_NONE) movl %ebp,%ebp /* zero extension */ - pushq $__USER32_DS - CFI_ADJUST_CFA_OFFSET 8 + pushq_cfi $__USER32_DS /*CFI_REL_OFFSET ss,0*/ - pushq %rbp - CFI_ADJUST_CFA_OFFSET 8 + pushq_cfi %rbp CFI_REL_OFFSET rsp,0 - pushfq - CFI_ADJUST_CFA_OFFSET 8 + pushfq_cfi /*CFI_REL_OFFSET rflags,0*/ movl 8*3-THREAD_SIZE+TI_sysenter_return(%rsp), %r10d CFI_REGISTER rip,r10 - pushq $__USER32_CS - CFI_ADJUST_CFA_OFFSET 8 + pushq_cfi $__USER32_CS /*CFI_REL_OFFSET cs,0*/ movl %eax, %eax - pushq %r10 - CFI_ADJUST_CFA_OFFSET 8 + pushq_cfi %r10 CFI_REL_OFFSET rip,0 - pushq %rax - CFI_ADJUST_CFA_OFFSET 8 + pushq_cfi %rax cld SAVE_ARGS 0,0,1 /* no need to do an access_ok check here because rbp has been @@ -182,11 +176,9 @@ sysexit_from_sys_call: xorq %r9,%r9 xorq %r10,%r10 xorq %r11,%r11 - popfq - CFI_ADJUST_CFA_OFFSET -8 + popfq_cfi /*CFI_RESTORE rflags*/ - popq %rcx /* User %esp */ - CFI_ADJUST_CFA_OFFSET -8 + popq_cfi %rcx /* User %esp */ CFI_REGISTER rsp,rcx TRACE_IRQS_ON ENABLE_INTERRUPTS_SYSEXIT32 @@ -421,8 +413,7 @@ ENTRY(ia32_syscall) */ ENABLE_INTERRUPTS(CLBR_NONE) movl %eax,%eax - pushq %rax - CFI_ADJUST_CFA_OFFSET 8 + pushq_cfi %rax cld /* note the registers are not zero extended to the sf. this could be a problem. */ diff --git a/arch/x86/include/asm/frame.h b/arch/x86/include/asm/frame.h index 06850a7194e..2c6fc9e6281 100644 --- a/arch/x86/include/asm/frame.h +++ b/arch/x86/include/asm/frame.h @@ -7,14 +7,12 @@ frame pointer later */ #ifdef CONFIG_FRAME_POINTER .macro FRAME - pushl %ebp - CFI_ADJUST_CFA_OFFSET 4 + pushl_cfi %ebp CFI_REL_OFFSET ebp,0 movl %esp,%ebp .endm .macro ENDFRAME - popl %ebp - CFI_ADJUST_CFA_OFFSET -4 + popl_cfi %ebp CFI_RESTORE ebp .endm #else diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index 49bdedd2dbc..2878821cb8c 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -1409,8 +1409,7 @@ END(general_protection) #ifdef CONFIG_KVM_GUEST ENTRY(async_page_fault) RING0_EC_FRAME - pushl $do_async_page_fault - CFI_ADJUST_CFA_OFFSET 4 + pushl_cfi $do_async_page_fault jmp error_code CFI_ENDPROC END(apf_page_fault) diff --git a/arch/x86/lib/atomic64_386_32.S b/arch/x86/lib/atomic64_386_32.S index 2cda60a06e6..e8e7e0d06f4 100644 --- a/arch/x86/lib/atomic64_386_32.S +++ b/arch/x86/lib/atomic64_386_32.S @@ -15,14 +15,12 @@ /* if you want SMP support, implement these with real spinlocks */ .macro LOCK reg - pushfl - CFI_ADJUST_CFA_OFFSET 4 + pushfl_cfi cli .endm .macro UNLOCK reg - popfl - CFI_ADJUST_CFA_OFFSET -4 + popfl_cfi .endm #define BEGIN(op) \ diff --git a/arch/x86/lib/atomic64_cx8_32.S b/arch/x86/lib/atomic64_cx8_32.S index 71e080de335..391a083674b 100644 --- a/arch/x86/lib/atomic64_cx8_32.S +++ b/arch/x86/lib/atomic64_cx8_32.S @@ -14,14 +14,12 @@ #include .macro SAVE reg - pushl %\reg - CFI_ADJUST_CFA_OFFSET 4 + pushl_cfi %\reg CFI_REL_OFFSET \reg, 0 .endm .macro RESTORE reg - popl %\reg - CFI_ADJUST_CFA_OFFSET -4 + popl_cfi %\reg CFI_RESTORE \reg .endm diff --git a/arch/x86/lib/checksum_32.S b/arch/x86/lib/checksum_32.S index adbccd0bbb7..78d16a554db 100644 --- a/arch/x86/lib/checksum_32.S +++ b/arch/x86/lib/checksum_32.S @@ -50,11 +50,9 @@ unsigned int csum_partial(const unsigned char * buff, int len, unsigned int sum) */ ENTRY(csum_partial) CFI_STARTPROC - pushl %esi - CFI_ADJUST_CFA_OFFSET 4 + pushl_cfi %esi CFI_REL_OFFSET esi, 0 - pushl %ebx - CFI_ADJUST_CFA_OFFSET 4 + pushl_cfi %ebx CFI_REL_OFFSET ebx, 0 movl 20(%esp),%eax # Function arg: unsigned int sum movl 16(%esp),%ecx # Function arg: int len @@ -132,11 +130,9 @@ ENTRY(csum_partial) jz 8f roll $8, %eax 8: - popl %ebx - CFI_ADJUST_CFA_OFFSET -4 + popl_cfi %ebx CFI_RESTORE ebx - popl %esi - CFI_ADJUST_CFA_OFFSET -4 + popl_cfi %esi CFI_RESTORE esi ret CFI_ENDPROC @@ -148,11 +144,9 @@ ENDPROC(csum_partial) ENTRY(csum_partial) CFI_STARTPROC - pushl %esi - CFI_ADJUST_CFA_OFFSET 4 + pushl_cfi %esi CFI_REL_OFFSET esi, 0 - pushl %ebx - CFI_ADJUST_CFA_OFFSET 4 + pushl_cfi %ebx CFI_REL_OFFSET ebx, 0 movl 20(%esp),%eax # Function arg: unsigned int sum movl 16(%esp),%ecx # Function arg: int len @@ -260,11 +254,9 @@ ENTRY(csum_partial) jz 90f roll $8, %eax 90: - popl %ebx - CFI_ADJUST_CFA_OFFSET -4 + popl_cfi %ebx CFI_RESTORE ebx - popl %esi - CFI_ADJUST_CFA_OFFSET -4 + popl_cfi %esi CFI_RESTORE esi ret CFI_ENDPROC @@ -309,14 +301,11 @@ ENTRY(csum_partial_copy_generic) CFI_STARTPROC subl $4,%esp CFI_ADJUST_CFA_OFFSET 4 - pushl %edi - CFI_ADJUST_CFA_OFFSET 4 + pushl_cfi %edi CFI_REL_OFFSET edi, 0 - pushl %esi - CFI_ADJUST_CFA_OFFSET 4 + pushl_cfi %esi CFI_REL_OFFSET esi, 0 - pushl %ebx - CFI_ADJUST_CFA_OFFSET 4 + pushl_cfi %ebx CFI_REL_OFFSET ebx, 0 movl ARGBASE+16(%esp),%eax # sum movl ARGBASE+12(%esp),%ecx # len @@ -426,17 +415,13 @@ DST( movb %cl, (%edi) ) .previous - popl %ebx - CFI_ADJUST_CFA_OFFSET -4 + popl_cfi %ebx CFI_RESTORE ebx - popl %esi - CFI_ADJUST_CFA_OFFSET -4 + popl_cfi %esi CFI_RESTORE esi - popl %edi - CFI_ADJUST_CFA_OFFSET -4 + popl_cfi %edi CFI_RESTORE edi - popl %ecx # equivalent to addl $4,%esp - CFI_ADJUST_CFA_OFFSET -4 + popl_cfi %ecx # equivalent to addl $4,%esp ret CFI_ENDPROC ENDPROC(csum_partial_copy_generic) @@ -459,14 +444,11 @@ ENDPROC(csum_partial_copy_generic) ENTRY(csum_partial_copy_generic) CFI_STARTPROC - pushl %ebx - CFI_ADJUST_CFA_OFFSET 4 + pushl_cfi %ebx CFI_REL_OFFSET ebx, 0 - pushl %edi - CFI_ADJUST_CFA_OFFSET 4 + pushl_cfi %edi CFI_REL_OFFSET edi, 0 - pushl %esi - CFI_ADJUST_CFA_OFFSET 4 + pushl_cfi %esi CFI_REL_OFFSET esi, 0 movl ARGBASE+4(%esp),%esi #src movl ARGBASE+8(%esp),%edi #dst @@ -527,14 +509,11 @@ DST( movb %dl, (%edi) ) jmp 7b .previous - popl %esi - CFI_ADJUST_CFA_OFFSET -4 + popl_cfi %esi CFI_RESTORE esi - popl %edi - CFI_ADJUST_CFA_OFFSET -4 + popl_cfi %edi CFI_RESTORE edi - popl %ebx - CFI_ADJUST_CFA_OFFSET -4 + popl_cfi %ebx CFI_RESTORE ebx ret CFI_ENDPROC diff --git a/arch/x86/lib/semaphore_32.S b/arch/x86/lib/semaphore_32.S index 648fe474178..48e44f7ed76 100644 --- a/arch/x86/lib/semaphore_32.S +++ b/arch/x86/lib/semaphore_32.S @@ -74,29 +74,23 @@ ENTRY(__read_lock_failed) /* Fix up special calling conventions */ ENTRY(call_rwsem_down_read_failed) CFI_STARTPROC - push %ecx - CFI_ADJUST_CFA_OFFSET 4 + pushl_cfi %ecx CFI_REL_OFFSET ecx,0 - push %edx - CFI_ADJUST_CFA_OFFSET 4 + pushl_cfi %edx CFI_REL_OFFSET edx,0 call rwsem_down_read_failed - pop %edx - CFI_ADJUST_CFA_OFFSET -4 - pop %ecx - CFI_ADJUST_CFA_OFFSET -4 + popl_cfi %edx + popl_cfi %ecx ret CFI_ENDPROC ENDPROC(call_rwsem_down_read_failed) ENTRY(call_rwsem_down_write_failed) CFI_STARTPROC - push %ecx - CFI_ADJUST_CFA_OFFSET 4 + pushl_cfi %ecx CFI_REL_OFFSET ecx,0 calll rwsem_down_write_failed - pop %ecx - CFI_ADJUST_CFA_OFFSET -4 + popl_cfi %ecx ret CFI_ENDPROC ENDPROC(call_rwsem_down_write_failed) @@ -105,12 +99,10 @@ ENTRY(call_rwsem_wake) CFI_STARTPROC decw %dx /* do nothing if still outstanding active readers */ jnz 1f - push %ecx - CFI_ADJUST_CFA_OFFSET 4 + pushl_cfi %ecx CFI_REL_OFFSET ecx,0 call rwsem_wake - pop %ecx - CFI_ADJUST_CFA_OFFSET -4 + popl_cfi %ecx 1: ret CFI_ENDPROC ENDPROC(call_rwsem_wake) @@ -118,17 +110,13 @@ ENTRY(call_rwsem_wake) /* Fix up special calling conventions */ ENTRY(call_rwsem_downgrade_wake) CFI_STARTPROC - push %ecx - CFI_ADJUST_CFA_OFFSET 4 + pushl_cfi %ecx CFI_REL_OFFSET ecx,0 - push %edx - CFI_ADJUST_CFA_OFFSET 4 + pushl_cfi %edx CFI_REL_OFFSET edx,0 call rwsem_downgrade_wake - pop %edx - CFI_ADJUST_CFA_OFFSET -4 - pop %ecx - CFI_ADJUST_CFA_OFFSET -4 + popl_cfi %edx + popl_cfi %ecx ret CFI_ENDPROC ENDPROC(call_rwsem_downgrade_wake) -- cgit v1.2.3-18-g5258 From 039e13890b0615cb8c5c04b6afa84d676e24c761 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 28 Feb 2011 15:56:00 +0000 Subject: x86: Remove unused bits from lib/thunk_*.S Some of the items removed were apparently never used, others simply didn't get removed with their last user. Signed-off-by: Jan Beulich LKML-Reference: <4D6BD3A002000078000341F1@vpn.id2.novell.com> Signed-off-by: Ingo Molnar --- arch/x86/lib/thunk_32.S | 18 ------------------ arch/x86/lib/thunk_64.S | 27 --------------------------- 2 files changed, 45 deletions(-) (limited to 'arch') diff --git a/arch/x86/lib/thunk_32.S b/arch/x86/lib/thunk_32.S index 650b11e00ec..2930ae05d77 100644 --- a/arch/x86/lib/thunk_32.S +++ b/arch/x86/lib/thunk_32.S @@ -7,24 +7,6 @@ #include -#define ARCH_TRACE_IRQS_ON \ - pushl %eax; \ - pushl %ecx; \ - pushl %edx; \ - call trace_hardirqs_on; \ - popl %edx; \ - popl %ecx; \ - popl %eax; - -#define ARCH_TRACE_IRQS_OFF \ - pushl %eax; \ - pushl %ecx; \ - pushl %edx; \ - call trace_hardirqs_off; \ - popl %edx; \ - popl %ecx; \ - popl %eax; - #ifdef CONFIG_TRACE_IRQFLAGS /* put return address in eax (arg1) */ .macro thunk_ra name,func diff --git a/arch/x86/lib/thunk_64.S b/arch/x86/lib/thunk_64.S index bf9a7d5a542..782b082c9ff 100644 --- a/arch/x86/lib/thunk_64.S +++ b/arch/x86/lib/thunk_64.S @@ -22,26 +22,6 @@ CFI_ENDPROC .endm - /* rdi: arg1 ... normal C conventions. rax is passed from C. */ - .macro thunk_retrax name,func - .globl \name -\name: - CFI_STARTPROC - SAVE_ARGS - call \func - jmp restore_norax - CFI_ENDPROC - .endm - - - .section .sched.text, "ax" -#ifdef CONFIG_RWSEM_XCHGADD_ALGORITHM - thunk rwsem_down_read_failed_thunk,rwsem_down_read_failed - thunk rwsem_down_write_failed_thunk,rwsem_down_write_failed - thunk rwsem_wake_thunk,rwsem_wake - thunk rwsem_downgrade_thunk,rwsem_downgrade_wake -#endif - #ifdef CONFIG_TRACE_IRQFLAGS /* put return address in rdi (arg1) */ .macro thunk_ra name,func @@ -72,10 +52,3 @@ restore: RESTORE_ARGS ret CFI_ENDPROC - - CFI_STARTPROC - SAVE_ARGS -restore_norax: - RESTORE_ARGS 1 - ret - CFI_ENDPROC -- cgit v1.2.3-18-g5258 From bac1a0f0bbf0b11b23fe714826f29fc9aeb35855 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 23 Feb 2011 00:14:06 -0700 Subject: OMAP2+: hwmod: allow multiple calls to omap_hwmod_init() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There's no longer any reason why we should prevent multiple calls to omap_hwmod_init(). It is now simply used to register an array of hwmods. This should allow a subset of hwmods (e.g., hwmods handling the system clocksource and clockevents) to be registered earlier than the remaining mass of hwmods. Signed-off-by: Paul Walmsley Cc: Benoît Cousson Cc: Kevin Hilman --- arch/arm/mach-omap2/omap_hwmod.c | 29 ++++++++++------------------- 1 file changed, 10 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 9e89a58711b..2a7ab6adee8 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -162,9 +162,6 @@ static LIST_HEAD(omap_hwmod_list); /* mpu_oh: used to add/remove MPU initiator from sleepdep list */ static struct omap_hwmod *mpu_oh; -/* inited: 0 if omap_hwmod_init() has not yet been called; 1 otherwise */ -static u8 inited; - /* Private functions */ @@ -1595,26 +1592,20 @@ int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data), */ int __init omap_hwmod_init(struct omap_hwmod **ohs) { - struct omap_hwmod *oh; - int r; - - if (inited) - return -EINVAL; - - inited = 1; + int r, i; if (!ohs) return 0; - oh = *ohs; - while (oh) { - if (omap_chip_is(oh->omap_chip)) { - r = _register(oh); - WARN(r, "omap_hwmod: %s: _register returned " - "%d\n", oh->name, r); - } - oh = *++ohs; - } + i = 0; + do { + if (!omap_chip_is(ohs[i]->omap_chip)) + continue; + + r = _register(ohs[i]); + WARN(r, "omap_hwmod: %s: _register returned %d\n", ohs[i]->name, + r); + } while (ohs[++i]); return 0; } -- cgit v1.2.3-18-g5258 From 550c8092c55c22db8f843bad070fd1731292a75e Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Mon, 28 Feb 2011 11:58:14 -0700 Subject: OMAP2+: hwmod: rename some init functions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Rename omap_hwmod_init() to omap_hwmod_register(). Rename omap_hwmod_late_init() to omap_hwmod_setup_all(). Also change all of the callers to reflect the new names. While here, update some copyrights. Suggested by Tony Lindgren . N.B. The comment in mach-omap2/serial.c may no longer be correct, given recent changes in init order. Signed-off-by: Paul Walmsley Cc: Benoît Cousson Cc: Kevin Hilman Cc: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod.c | 33 +++++++++++++--------------- arch/arm/mach-omap2/omap_hwmod_2420_data.c | 2 +- arch/arm/mach-omap2/omap_hwmod_2430_data.c | 2 +- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 2 +- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 2 +- arch/arm/mach-omap2/serial.c | 2 +- arch/arm/plat-omap/include/plat/omap_hwmod.h | 6 +++-- 7 files changed, 24 insertions(+), 25 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 2a7ab6adee8..557d9eb609a 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1,7 +1,7 @@ /* * omap_hwmod implementation for OMAP2/3/4 * - * Copyright (C) 2009-2010 Nokia Corporation + * Copyright (C) 2009-2011 Nokia Corporation * * Paul Walmsley, Benoît Cousson, Kevin Hilman * @@ -901,7 +901,7 @@ static struct omap_hwmod *_lookup(const char *name) * @oh: struct omap_hwmod * * @data: not used; pass NULL * - * Called by omap_hwmod_late_init() (after omap2_clk_init()). + * Called by omap_hwmod_setup_all() (after omap2_clk_init()). * Resolves all clock names embedded in the hwmod. Returns -EINVAL if * the omap_hwmod has not yet been registered or if the clocks have * already been initialized, 0 on success, or a non-zero error on @@ -1580,17 +1580,15 @@ int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data), return ret; } - /** - * omap_hwmod_init - init omap_hwmod code and register hwmods + * omap_hwmod_register - register an array of hwmods * @ohs: pointer to an array of omap_hwmods to register * * Intended to be called early in boot before the clock framework is * initialized. If @ohs is not null, will register all omap_hwmods - * listed in @ohs that are valid for this chip. Returns -EINVAL if - * omap_hwmod_init() has already been called or 0 otherwise. + * listed in @ohs that are valid for this chip. Returns 0. */ -int __init omap_hwmod_init(struct omap_hwmod **ohs) +int __init omap_hwmod_register(struct omap_hwmod **ohs) { int r, i; @@ -1613,9 +1611,8 @@ int __init omap_hwmod_init(struct omap_hwmod **ohs) /* * _populate_mpu_rt_base - populate the virtual address for a hwmod * - * Must be called only from omap_hwmod_late_init so ioremap works properly. + * Must be called only from omap_hwmod_setup_all() so ioremap works properly. * Assumes the caller takes care of locking if needed. - * */ static int __init _populate_mpu_rt_base(struct omap_hwmod *oh, void *data) { @@ -1631,13 +1628,13 @@ static int __init _populate_mpu_rt_base(struct omap_hwmod *oh, void *data) } /** - * omap_hwmod_late_init - do some post-clock framework initialization + * omap_hwmod_setup - do some post-clock framework initialization * * Must be called after omap2_clk_init(). Resolves the struct clk names * to struct clk pointers for each registered omap_hwmod. Also calls * _setup() on each hwmod. Returns 0. */ -static int __init omap_hwmod_late_init(void) +static int __init omap_hwmod_setup_all(void) { int r; @@ -1645,7 +1642,7 @@ static int __init omap_hwmod_late_init(void) /* XXX check return value */ r = omap_hwmod_for_each(_init_clocks, NULL); - WARN(r, "omap_hwmod: omap_hwmod_late_init(): _init_clocks failed\n"); + WARN(r, "omap_hwmod: %s: _init_clocks failed\n", __func__); mpu_oh = omap_hwmod_lookup(MPU_INITIATOR_NAME); WARN(!mpu_oh, "omap_hwmod: could not find MPU initiator hwmod %s\n", @@ -1655,7 +1652,7 @@ static int __init omap_hwmod_late_init(void) return 0; } -core_initcall(omap_hwmod_late_init); +core_initcall(omap_hwmod_setup_all); /** * omap_hwmod_enable - enable an omap_hwmod @@ -2174,11 +2171,11 @@ int omap_hwmod_for_each_by_class(const char *classname, * @oh: struct omap_hwmod * * @state: state that _setup() should leave the hwmod in * - * Sets the hwmod state that @oh will enter at the end of _setup() (called by - * omap_hwmod_late_init()). Only valid to call between calls to - * omap_hwmod_init() and omap_hwmod_late_init(). Returns 0 upon success or - * -EINVAL if there is a problem with the arguments or if the hwmod is - * in the wrong state. + * Sets the hwmod state that @oh will enter at the end of _setup() + * (called by omap_hwmod_setup_all()). Only valid to call between + * calling omap_hwmod_register() and omap_hwmod_setup_all(). Returns + * 0 upon success or -EINVAL if there is a problem with the arguments + * or if the hwmod is in the wrong state. */ int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state) { diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index c2f84aa114b..e58621aa9b3 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -1990,5 +1990,5 @@ static __initdata struct omap_hwmod *omap2420_hwmods[] = { int __init omap2420_hwmod_init(void) { - return omap_hwmod_init(omap2420_hwmods); + return omap_hwmod_register(omap2420_hwmods); } diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index c03699653b0..b46a54ce1a4 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -2183,5 +2183,5 @@ static __initdata struct omap_hwmod *omap2430_hwmods[] = { int __init omap2430_hwmod_init(void) { - return omap_hwmod_init(omap2430_hwmods); + return omap_hwmod_register(omap2430_hwmods); } diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index b8776ee241f..fc1b2b963bb 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -2919,5 +2919,5 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { int __init omap3xxx_hwmod_init(void) { - return omap_hwmod_init(omap3xxx_hwmods); + return omap_hwmod_register(omap3xxx_hwmods); } diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 79a86017891..2c5882792e0 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -5125,6 +5125,6 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = { int __init omap44xx_hwmod_init(void) { - return omap_hwmod_init(omap44xx_hwmods); + return omap_hwmod_register(omap44xx_hwmods); } diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 47eef48b883..1ac361b7b8c 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -680,7 +680,7 @@ static int __init omap_serial_early_init(void) num_uarts++; /* - * NOTE: omap_hwmod_init() has not yet been called, + * NOTE: omap_hwmod_setup*() has not yet been called, * so no hwmod functions will work yet. */ diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index fedd82971c9..afdf1971c51 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -1,7 +1,7 @@ /* * omap_hwmod macros, structures * - * Copyright (C) 2009-2010 Nokia Corporation + * Copyright (C) 2009-2011 Nokia Corporation * Paul Walmsley * * Created in collaboration with (alphabetical order): Benoît Cousson, @@ -370,8 +370,10 @@ struct omap_hwmod_omap4_prcm { * of standby, rather than relying on module smart-standby * HWMOD_INIT_NO_RESET: don't reset this module at boot - important for * SDRAM controller, etc. XXX probably belongs outside the main hwmod file + * XXX Should be HWMOD_SETUP_NO_RESET * HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM * controller, etc. XXX probably belongs outside the main hwmod file + * XXX Should be HWMOD_SETUP_NO_IDLE * HWMOD_NO_AUTOIDLE: disable module autoidle (OCP_SYSCONFIG.AUTOIDLE) * when module is enabled, rather than the default, which is to * enable autoidle @@ -535,7 +537,7 @@ struct omap_hwmod { const struct omap_chip_id omap_chip; }; -int omap_hwmod_init(struct omap_hwmod **ohs); +int omap_hwmod_register(struct omap_hwmod **ohs); struct omap_hwmod *omap_hwmod_lookup(const char *name); int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data), void *data); -- cgit v1.2.3-18-g5258 From 3162aa2f1b55849651a05052d3e5f5e640ea44fa Mon Sep 17 00:00:00 2001 From: David Brown Date: Mon, 14 Feb 2011 16:15:26 -0800 Subject: msm: Use explicit GPLv2 licenses Replace a BSD-style license in Code Aurora Forum authored files with an explicit GPLv2. Signed-off-by: David Brown --- arch/arm/mach-msm/clock-7x30.h | 31 +++++++----------------------- arch/arm/mach-msm/clock-pcom.h | 31 +++++++----------------------- arch/arm/mach-msm/include/mach/clk.h | 31 +++++++----------------------- arch/arm/mach-msm/include/mach/irqs-7x30.h | 31 +++++++----------------------- arch/arm/mach-msm/include/mach/irqs-8960.h | 30 +++++++---------------------- arch/arm/mach-msm/include/mach/irqs-8x50.h | 31 +++++++----------------------- arch/arm/mach-msm/include/mach/sirc.h | 31 +++++++----------------------- arch/arm/mach-msm/include/mach/smp.h | 30 +++++++---------------------- arch/arm/mach-msm/scm-boot.h | 30 +++++++---------------------- arch/arm/mach-msm/scm.h | 30 +++++++---------------------- 10 files changed, 70 insertions(+), 236 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-msm/clock-7x30.h b/arch/arm/mach-msm/clock-7x30.h index e16f72f3282..da8e1c6f774 100644 --- a/arch/arm/mach-msm/clock-7x30.h +++ b/arch/arm/mach-msm/clock-7x30.h @@ -1,30 +1,13 @@ /* Copyright (c) 2009, Code Aurora Forum. All rights reserved. * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are - * met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials provided - * with the distribution. - * * Neither the name of Code Aurora Forum, Inc. nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS - * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR - * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, - * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE - * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN - * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. */ #ifndef __ARCH_ARM_MACH_MSM_CLOCK_7X30_H diff --git a/arch/arm/mach-msm/clock-pcom.h b/arch/arm/mach-msm/clock-pcom.h index 2c813f1dba2..53dea61da76 100644 --- a/arch/arm/mach-msm/clock-pcom.h +++ b/arch/arm/mach-msm/clock-pcom.h @@ -1,30 +1,13 @@ /* Copyright (c) 2009, Code Aurora Forum. All rights reserved. * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are - * met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials provided - * with the distribution. - * * Neither the name of Code Aurora Forum, Inc. nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS - * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR - * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, - * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE - * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN - * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. */ #ifndef __ARCH_ARM_MACH_MSM_CLOCK_PCOM_H diff --git a/arch/arm/mach-msm/include/mach/clk.h b/arch/arm/mach-msm/include/mach/clk.h index c05ca40478c..e8d38428d81 100644 --- a/arch/arm/mach-msm/include/mach/clk.h +++ b/arch/arm/mach-msm/include/mach/clk.h @@ -1,30 +1,13 @@ /* Copyright (c) 2009, Code Aurora Forum. All rights reserved. * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are - * met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials provided - * with the distribution. - * * Neither the name of Code Aurora Forum, Inc. nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS - * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR - * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, - * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE - * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN - * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. */ #ifndef __MACH_CLK_H #define __MACH_CLK_H diff --git a/arch/arm/mach-msm/include/mach/irqs-7x30.h b/arch/arm/mach-msm/include/mach/irqs-7x30.h index 67c5396514f..1f15902655f 100644 --- a/arch/arm/mach-msm/include/mach/irqs-7x30.h +++ b/arch/arm/mach-msm/include/mach/irqs-7x30.h @@ -1,30 +1,13 @@ /* Copyright (c) 2009, Code Aurora Forum. All rights reserved. * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are - * met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials provided - * with the distribution. - * * Neither the name of Code Aurora Forum, Inc. nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS - * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR - * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, - * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE - * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN - * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. */ #ifndef __ASM_ARCH_MSM_IRQS_7X30_H diff --git a/arch/arm/mach-msm/include/mach/irqs-8960.h b/arch/arm/mach-msm/include/mach/irqs-8960.h index c7f083c53d4..81ab2a6792b 100644 --- a/arch/arm/mach-msm/include/mach/irqs-8960.h +++ b/arch/arm/mach-msm/include/mach/irqs-8960.h @@ -1,29 +1,13 @@ /* Copyright (c) 2011 Code Aurora Forum. All rights reserved. * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Code Aurora nor - * the names of its contributors may be used to endorse or promote - * products derived from this software without specific prior written - * permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; - * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, - * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF - * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. */ #ifndef __ASM_ARCH_MSM_IRQS_8960_H diff --git a/arch/arm/mach-msm/include/mach/irqs-8x50.h b/arch/arm/mach-msm/include/mach/irqs-8x50.h index de3d8fe24e4..26adbe0e940 100644 --- a/arch/arm/mach-msm/include/mach/irqs-8x50.h +++ b/arch/arm/mach-msm/include/mach/irqs-8x50.h @@ -1,30 +1,13 @@ /* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved. * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are - * met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials provided - * with the distribution. - * * Neither the name of Code Aurora Forum, Inc. nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS - * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR - * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, - * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE - * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN - * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. */ #ifndef __ASM_ARCH_MSM_IRQS_8XXX_H diff --git a/arch/arm/mach-msm/include/mach/sirc.h b/arch/arm/mach-msm/include/mach/sirc.h index 7281337ee28..ef55868a5b8 100644 --- a/arch/arm/mach-msm/include/mach/sirc.h +++ b/arch/arm/mach-msm/include/mach/sirc.h @@ -1,30 +1,13 @@ /* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved. * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are - * met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials provided - * with the distribution. - * * Neither the name of Code Aurora Forum, Inc. nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS - * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR - * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, - * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE - * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN - * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. */ #ifndef __ASM_ARCH_MSM_SIRC_H diff --git a/arch/arm/mach-msm/include/mach/smp.h b/arch/arm/mach-msm/include/mach/smp.h index a95f7b9efe3..3c01000ecc8 100644 --- a/arch/arm/mach-msm/include/mach/smp.h +++ b/arch/arm/mach-msm/include/mach/smp.h @@ -1,29 +1,13 @@ /* Copyright (c) 2010, Code Aurora Forum. All rights reserved. * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Code Aurora nor - * the names of its contributors may be used to endorse or promote - * products derived from this software without specific prior written - * permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; - * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, - * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF - * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. */ #ifndef __ASM_ARCH_MSM_SMP_H diff --git a/arch/arm/mach-msm/scm-boot.h b/arch/arm/mach-msm/scm-boot.h index 68f9b6153d7..7be32ff5d68 100644 --- a/arch/arm/mach-msm/scm-boot.h +++ b/arch/arm/mach-msm/scm-boot.h @@ -1,29 +1,13 @@ /* Copyright (c) 2010, Code Aurora Forum. All rights reserved. * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are - * met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials provided - * with the distribution. - * * Neither the name of Code Aurora Forum, Inc. nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. * - * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS - * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR - * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, - * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE - * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN - * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. */ #ifndef __MACH_SCM_BOOT_H #define __MACH_SCM_BOOT_H diff --git a/arch/arm/mach-msm/scm.h b/arch/arm/mach-msm/scm.h index 261786be11c..00b31ea58f2 100644 --- a/arch/arm/mach-msm/scm.h +++ b/arch/arm/mach-msm/scm.h @@ -1,29 +1,13 @@ /* Copyright (c) 2010, Code Aurora Forum. All rights reserved. * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are - * met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials provided - * with the distribution. - * * Neither the name of Code Aurora Forum, Inc. nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. * - * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS - * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR - * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, - * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE - * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN - * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. */ #ifndef __MACH_SCM_H #define __MACH_SCM_H -- cgit v1.2.3-18-g5258 From 0693a317b609a5d31d29e26c4f28ea079d5477f4 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Fri, 18 Feb 2011 19:14:09 -0800 Subject: msm: headsmp.S: Fix section mismatch WARNING: vmlinux.o(.cpuinit.text+0xc80): Section mismatch in reference from the function boot_secondary() to the variable .init.text:msm_secondary_startup The function __cpuinit boot_secondary() references a variable __init msm_secondary_startup. If msm_secondary_startup is only used by boot_secondary then annotate msm_secondary_startup with a matching annotation. Signed-off-by: Stephen Boyd Signed-off-by: David Brown --- arch/arm/mach-msm/headsmp.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-msm/headsmp.S b/arch/arm/mach-msm/headsmp.S index d0c214338df..0c631a9f864 100644 --- a/arch/arm/mach-msm/headsmp.S +++ b/arch/arm/mach-msm/headsmp.S @@ -11,7 +11,7 @@ #include #include - __INIT + __CPUINIT /* * MSM specific entry point for secondary CPUs. This provides -- cgit v1.2.3-18-g5258 From 2a52220c89e02423aa23e6b9fb6dc0c706465a82 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 23 Feb 2011 09:37:41 -0800 Subject: msm: clock: Remove references to clk_ops_pcom Not all devices use proc_comm and determining if a clock is local vs. remote is fragile when done by comparing clk_ops pointers. Instead, implement an is_local() function for all clk_ops to determine if the clock is local. Doing this allows us to remove the last references to clk_ops_pcom from clock.c and compile it for targets with CONFIG_MSM_PROC_COMM=n. We don't need to set the clk_ops at runtime until 7x30 local clock detection comes in. Right now it's just complicating things so just set the ops pointer statically. Signed-off-by: Stephen Boyd Signed-off-by: David Brown --- arch/arm/mach-msm/Makefile | 6 +---- arch/arm/mach-msm/clock-7x30.h | 1 + arch/arm/mach-msm/clock-debug.c | 3 +-- arch/arm/mach-msm/clock-dummy.c | 54 ----------------------------------------- arch/arm/mach-msm/clock-pcom.c | 6 +++++ arch/arm/mach-msm/clock.c | 17 +------------ arch/arm/mach-msm/clock.h | 1 + 7 files changed, 11 insertions(+), 77 deletions(-) delete mode 100644 arch/arm/mach-msm/clock-dummy.c (limited to 'arch') diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index 2099c979fe2..9519fd28a02 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -1,7 +1,6 @@ obj-y += io.o idle.o timer.o -ifdef CONFIG_MSM_PROC_COMM +obj-y += clock.o obj-$(CONFIG_DEBUG_FS) += clock-debug.o -endif obj-$(CONFIG_MSM_VIC) += irq-vic.o obj-$(CONFIG_MSM_IOMMU) += iommu.o iommu_dev.o devices-iommu.o @@ -9,11 +8,8 @@ obj-$(CONFIG_MSM_IOMMU) += iommu.o iommu_dev.o devices-iommu.o obj-$(CONFIG_ARCH_MSM7X00A) += dma.o irq.o acpuclock-arm11.o obj-$(CONFIG_ARCH_MSM7X30) += dma.o obj-$(CONFIG_ARCH_QSD8X50) += dma.o sirc.o -obj-$(CONFIG_ARCH_MSM8X60) += clock-dummy.o -obj-$(CONFIG_ARCH_MSM8960) += clock-dummy.o obj-$(CONFIG_MSM_PROC_COMM) += proc_comm.o clock-pcom.o vreg.o -obj-$(CONFIG_MSM_PROC_COMM) += clock.o obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o obj-$(CONFIG_MSM_SMD) += last_radio_log.o diff --git a/arch/arm/mach-msm/clock-7x30.h b/arch/arm/mach-msm/clock-7x30.h index da8e1c6f774..53622b3992b 100644 --- a/arch/arm/mach-msm/clock-7x30.h +++ b/arch/arm/mach-msm/clock-7x30.h @@ -145,6 +145,7 @@ extern int internal_pwr_rail_ctl_auto(unsigned rail_id, bool enable); .flags = clk_flags, \ .dev = clk_dev, \ .dbg_name = #l_id, \ + .ops = &clk_ops_pcom, \ } #endif diff --git a/arch/arm/mach-msm/clock-debug.c b/arch/arm/mach-msm/clock-debug.c index b67b9e82ece..4886404d42f 100644 --- a/arch/arm/mach-msm/clock-debug.c +++ b/arch/arm/mach-msm/clock-debug.c @@ -19,7 +19,6 @@ #include #include #include "clock.h" -#include "clock-pcom.h" static int clock_debug_rate_set(void *data, u64 val) { @@ -79,7 +78,7 @@ static int clock_debug_local_get(void *data, u64 *val) { struct clk *clock = data; - *val = clock->ops != &clk_ops_pcom; + *val = clock->ops->is_local(clock->id); return 0; } diff --git a/arch/arm/mach-msm/clock-dummy.c b/arch/arm/mach-msm/clock-dummy.c deleted file mode 100644 index 1250d22082e..00000000000 --- a/arch/arm/mach-msm/clock-dummy.c +++ /dev/null @@ -1,54 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - * - */ -#include -#include -#include - -struct clk *clk_get(struct device *dev, const char *id) -{ - return ERR_PTR(-ENOENT); -} -EXPORT_SYMBOL(clk_get); - -int clk_enable(struct clk *clk) -{ - return -ENOENT; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_get_rate); - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - return -ENOENT; -} -EXPORT_SYMBOL(clk_set_rate); - -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); diff --git a/arch/arm/mach-msm/clock-pcom.c b/arch/arm/mach-msm/clock-pcom.c index 8c4e8672501..63b71131108 100644 --- a/arch/arm/mach-msm/clock-pcom.c +++ b/arch/arm/mach-msm/clock-pcom.c @@ -117,6 +117,11 @@ long pc_clk_round_rate(unsigned id, unsigned rate) return rate; } +static bool pc_clk_is_local(unsigned id) +{ + return false; +} + struct clk_ops clk_ops_pcom = { .enable = pc_clk_enable, .disable = pc_clk_disable, @@ -129,4 +134,5 @@ struct clk_ops clk_ops_pcom = { .get_rate = pc_clk_get_rate, .is_enabled = pc_clk_is_enabled, .round_rate = pc_clk_round_rate, + .is_local = pc_clk_is_local, }; diff --git a/arch/arm/mach-msm/clock.c b/arch/arm/mach-msm/clock.c index 8c2b4dd4a87..e00f6a040ad 100644 --- a/arch/arm/mach-msm/clock.c +++ b/arch/arm/mach-msm/clock.c @@ -21,9 +21,6 @@ #include #include "clock.h" -#include "proc_comm.h" -#include "clock-7x30.h" -#include "clock-pcom.h" static DEFINE_MUTEX(clocks_mutex); static DEFINE_SPINLOCK(clocks_lock); @@ -84,8 +81,6 @@ EXPORT_SYMBOL(clk_disable); int clk_reset(struct clk *clk, enum clk_reset_action action) { - if (!clk->ops->reset) - clk->ops->reset = &pc_clk_reset; return clk->ops->reset(clk->remote_id, action); } EXPORT_SYMBOL(clk_reset); @@ -162,23 +157,13 @@ EXPORT_SYMBOL(clk_set_flags); */ static struct clk *ebi1_clk; -static void __init set_clock_ops(struct clk *clk) -{ - if (!clk->ops) { - clk->ops = &clk_ops_pcom; - clk->id = clk->remote_id; - } -} - void __init msm_clock_init(struct clk *clock_tbl, unsigned num_clocks) { unsigned n; mutex_lock(&clocks_mutex); - for (n = 0; n < num_clocks; n++) { - set_clock_ops(&clock_tbl[n]); + for (n = 0; n < num_clocks; n++) list_add_tail(&clock_tbl[n].list, &clocks); - } mutex_unlock(&clocks_mutex); ebi1_clk = clk_get(NULL, "ebi1_clk"); diff --git a/arch/arm/mach-msm/clock.h b/arch/arm/mach-msm/clock.h index 70216b0e968..8d302c7403a 100644 --- a/arch/arm/mach-msm/clock.h +++ b/arch/arm/mach-msm/clock.h @@ -43,6 +43,7 @@ struct clk_ops { unsigned (*get_rate)(unsigned id); unsigned (*is_enabled)(unsigned id); long (*round_rate)(unsigned id, unsigned rate); + bool (*is_local)(unsigned id); }; struct clk { -- cgit v1.2.3-18-g5258 From bd32344a6baa8baac9c2b3e9c6c649cc4ed53920 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 23 Feb 2011 09:37:42 -0800 Subject: msm: clock: Migrate to clkdev Migrating to clkdev has several advantages: * Less code in mach-msm/clock.c * A more robust clk_get() implementation * clk_add_alias() support * clk_get_sys() support In general, this will help board authors setup clock aliases and break the dependency on device pointers in the clock tables. Signed-off-by: Stephen Boyd Signed-off-by: David Brown --- arch/arm/Kconfig | 1 + arch/arm/mach-msm/board-msm7x30.c | 1 + arch/arm/mach-msm/board-msm8960.c | 1 + arch/arm/mach-msm/board-qsd8x50.c | 1 + arch/arm/mach-msm/board-trout.c | 1 + arch/arm/mach-msm/clock-7x30.h | 31 ++++++++++++++------------ arch/arm/mach-msm/clock-pcom.h | 16 ++++++++------ arch/arm/mach-msm/clock.c | 39 +++++++++------------------------ arch/arm/mach-msm/clock.h | 2 -- arch/arm/mach-msm/devices-msm7x00.c | 32 +++++++++++++-------------- arch/arm/mach-msm/devices-msm7x30.c | 5 +++-- arch/arm/mach-msm/devices-qsd8x50.c | 23 +++++++++---------- arch/arm/mach-msm/devices.h | 8 ++++--- arch/arm/mach-msm/include/mach/board.h | 4 ++-- arch/arm/mach-msm/include/mach/clkdev.h | 19 ++++++++++++++++ 15 files changed, 98 insertions(+), 86 deletions(-) create mode 100644 arch/arm/mach-msm/include/mach/clkdev.h (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5cff165b7eb..4d266509b45 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -619,6 +619,7 @@ config ARCH_MSM select HAVE_CLK select GENERIC_CLOCKEVENTS select ARCH_REQUIRE_GPIOLIB + select CLKDEV_LOOKUP help Support for Qualcomm MSM/QSD based systems. This runs on the apps processor of the MSM/QSD and depends on a shared memory diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c index dc9fac107c6..cf15889ab61 100644 --- a/arch/arm/mach-msm/board-msm7x30.c +++ b/arch/arm/mach-msm/board-msm7x30.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include diff --git a/arch/arm/mach-msm/board-msm8960.c b/arch/arm/mach-msm/board-msm8960.c index ef80f46d6cb..1993721d472 100644 --- a/arch/arm/mach-msm/board-msm8960.c +++ b/arch/arm/mach-msm/board-msm8960.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c index b464d48da7c..127ee6df242 100644 --- a/arch/arm/mach-msm/board-qsd8x50.c +++ b/arch/arm/mach-msm/board-qsd8x50.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c index 8448687f5a4..814386772c6 100644 --- a/arch/arm/mach-msm/board-trout.c +++ b/arch/arm/mach-msm/board-trout.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include diff --git a/arch/arm/mach-msm/clock-7x30.h b/arch/arm/mach-msm/clock-7x30.h index 53622b3992b..14104453688 100644 --- a/arch/arm/mach-msm/clock-7x30.h +++ b/arch/arm/mach-msm/clock-7x30.h @@ -130,23 +130,26 @@ void pll_disable(uint32_t pll); extern int internal_pwr_rail_ctl_auto(unsigned rail_id, bool enable); #define CLK_7X30(clk_name, clk_id, clk_dev, clk_flags) { \ - .name = clk_name, \ - .id = L_7X30_##clk_id, \ - .remote_id = P_##clk_id, \ - .flags = clk_flags, \ - .dev = clk_dev, \ - .dbg_name = #clk_id, \ + .con_id = clk_name, \ + .dev_id = clk_dev, \ + .clk = &(struct clk){ \ + .id = L_7X30_##clk_id, \ + .remote_id = P_##clk_id, \ + .flags = clk_flags, \ + .dbg_name = #clk_id, \ + }, \ } #define CLK_7X30S(clk_name, l_id, r_id, clk_dev, clk_flags) { \ - .name = clk_name, \ - .id = L_7X30_##l_id, \ - .remote_id = P_##r_id, \ - .flags = clk_flags, \ - .dev = clk_dev, \ - .dbg_name = #l_id, \ - .ops = &clk_ops_pcom, \ + .con_id = clk_name, \ + .dev_id = clk_dev, \ + .clk = &(struct clk){ \ + .id = L_7X30_##l_id, \ + .remote_id = P_##r_id, \ + .flags = clk_flags, \ + .dbg_name = #l_id, \ + .ops = &clk_ops_pcom, \ + }, \ } #endif - diff --git a/arch/arm/mach-msm/clock-pcom.h b/arch/arm/mach-msm/clock-pcom.h index 53dea61da76..974d0032f3a 100644 --- a/arch/arm/mach-msm/clock-pcom.h +++ b/arch/arm/mach-msm/clock-pcom.h @@ -126,13 +126,15 @@ extern struct clk_ops clk_ops_pcom; int pc_clk_reset(unsigned id, enum clk_reset_action action); #define CLK_PCOM(clk_name, clk_id, clk_dev, clk_flags) { \ - .name = clk_name, \ - .id = P_##clk_id, \ - .remote_id = P_##clk_id, \ - .ops = &clk_ops_pcom, \ - .flags = clk_flags, \ - .dev = clk_dev, \ - .dbg_name = #clk_id, \ + .con_id = clk_name, \ + .dev_id = clk_dev, \ + .clk = &(struct clk){ \ + .id = P_##clk_id, \ + .remote_id = P_##clk_id, \ + .ops = &clk_ops_pcom, \ + .flags = clk_flags, \ + .dbg_name = #clk_id, \ + }, \ } #endif diff --git a/arch/arm/mach-msm/clock.c b/arch/arm/mach-msm/clock.c index e00f6a040ad..22a53766962 100644 --- a/arch/arm/mach-msm/clock.c +++ b/arch/arm/mach-msm/clock.c @@ -19,6 +19,11 @@ #include #include #include +#include +#include +#include +#include +#include #include "clock.h" @@ -29,32 +34,6 @@ static LIST_HEAD(clocks); /* * Standard clock functions defined in include/linux/clk.h */ -struct clk *clk_get(struct device *dev, const char *id) -{ - struct clk *clk; - - mutex_lock(&clocks_mutex); - - list_for_each_entry(clk, &clocks, list) - if (!strcmp(id, clk->name) && clk->dev == dev) - goto found_it; - - list_for_each_entry(clk, &clocks, list) - if (!strcmp(id, clk->name) && clk->dev == NULL) - goto found_it; - - clk = ERR_PTR(-ENOENT); -found_it: - mutex_unlock(&clocks_mutex); - return clk; -} -EXPORT_SYMBOL(clk_get); - -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); - int clk_enable(struct clk *clk) { unsigned long flags; @@ -157,13 +136,15 @@ EXPORT_SYMBOL(clk_set_flags); */ static struct clk *ebi1_clk; -void __init msm_clock_init(struct clk *clock_tbl, unsigned num_clocks) +void __init msm_clock_init(struct clk_lookup *clock_tbl, unsigned num_clocks) { unsigned n; mutex_lock(&clocks_mutex); - for (n = 0; n < num_clocks; n++) - list_add_tail(&clock_tbl[n].list, &clocks); + for (n = 0; n < num_clocks; n++) { + clkdev_add(&clock_tbl[n]); + list_add_tail(&clock_tbl[n].clk->list, &clocks); + } mutex_unlock(&clocks_mutex); ebi1_clk = clk_get(NULL, "ebi1_clk"); diff --git a/arch/arm/mach-msm/clock.h b/arch/arm/mach-msm/clock.h index 8d302c7403a..2c007f606d2 100644 --- a/arch/arm/mach-msm/clock.h +++ b/arch/arm/mach-msm/clock.h @@ -51,11 +51,9 @@ struct clk { uint32_t remote_id; uint32_t count; uint32_t flags; - const char *name; struct clk_ops *ops; const char *dbg_name; struct list_head list; - struct device *dev; }; #define OFF CLKFLAG_AUTO_OFF diff --git a/arch/arm/mach-msm/devices-msm7x00.c b/arch/arm/mach-msm/devices-msm7x00.c index ed62806559e..c4f5e26feb4 100644 --- a/arch/arm/mach-msm/devices-msm7x00.c +++ b/arch/arm/mach-msm/devices-msm7x00.c @@ -15,6 +15,7 @@ #include #include +#include #include #include @@ -24,7 +25,6 @@ #include #include - #include "clock.h" #include "clock-pcom.h" #include @@ -418,7 +418,7 @@ struct platform_device msm_device_mdp = { .resource = resources_mdp, }; -struct clk msm_clocks_7x01a[] = { +struct clk_lookup msm_clocks_7x01a[] = { CLK_PCOM("adm_clk", ADM_CLK, NULL, 0), CLK_PCOM("adsp_clk", ADSP_CLK, NULL, 0), CLK_PCOM("ebi1_clk", EBI1_CLK, NULL, 0), @@ -427,7 +427,7 @@ struct clk msm_clocks_7x01a[] = { CLK_PCOM("emdh_clk", EMDH_CLK, NULL, OFF), CLK_PCOM("gp_clk", GP_CLK, NULL, 0), CLK_PCOM("grp_clk", GRP_3D_CLK, NULL, OFF), - CLK_PCOM("i2c_clk", I2C_CLK, &msm_device_i2c.dev, 0), + CLK_PCOM("i2c_clk", I2C_CLK, "msm_i2c.0", 0), CLK_PCOM("icodec_rx_clk", ICODEC_RX_CLK, NULL, 0), CLK_PCOM("icodec_tx_clk", ICODEC_TX_CLK, NULL, 0), CLK_PCOM("imem_clk", IMEM_CLK, NULL, OFF), @@ -437,25 +437,25 @@ struct clk msm_clocks_7x01a[] = { CLK_PCOM("pcm_clk", PCM_CLK, NULL, 0), CLK_PCOM("mddi_clk", PMDH_CLK, NULL, OFF | CLK_MINMAX), CLK_PCOM("sdac_clk", SDAC_CLK, NULL, OFF), - CLK_PCOM("sdc_clk", SDC1_CLK, &msm_device_sdc1.dev, OFF), - CLK_PCOM("sdc_pclk", SDC1_P_CLK, &msm_device_sdc1.dev, OFF), - CLK_PCOM("sdc_clk", SDC2_CLK, &msm_device_sdc2.dev, OFF), - CLK_PCOM("sdc_pclk", SDC2_P_CLK, &msm_device_sdc2.dev, OFF), - CLK_PCOM("sdc_clk", SDC3_CLK, &msm_device_sdc3.dev, OFF), - CLK_PCOM("sdc_pclk", SDC3_P_CLK, &msm_device_sdc3.dev, OFF), - CLK_PCOM("sdc_clk", SDC4_CLK, &msm_device_sdc4.dev, OFF), - CLK_PCOM("sdc_pclk", SDC4_P_CLK, &msm_device_sdc4.dev, OFF), + CLK_PCOM("sdc_clk", SDC1_CLK, "msm_sdcc.1", OFF), + CLK_PCOM("sdc_pclk", SDC1_P_CLK, "msm_sdcc.1", OFF), + CLK_PCOM("sdc_clk", SDC2_CLK, "msm_sdcc.2", OFF), + CLK_PCOM("sdc_pclk", SDC2_P_CLK, "msm_sdcc.2", OFF), + CLK_PCOM("sdc_clk", SDC3_CLK, "msm_sdcc.3", OFF), + CLK_PCOM("sdc_pclk", SDC3_P_CLK, "msm_sdcc.3", OFF), + CLK_PCOM("sdc_clk", SDC4_CLK, "msm_sdcc.4", OFF), + CLK_PCOM("sdc_pclk", SDC4_P_CLK, "msm_sdcc.4", OFF), CLK_PCOM("tsif_clk", TSIF_CLK, NULL, 0), CLK_PCOM("tsif_ref_clk", TSIF_REF_CLK, NULL, 0), CLK_PCOM("tv_dac_clk", TV_DAC_CLK, NULL, 0), CLK_PCOM("tv_enc_clk", TV_ENC_CLK, NULL, 0), - CLK_PCOM("uart_clk", UART1_CLK, &msm_device_uart1.dev, OFF), - CLK_PCOM("uart_clk", UART2_CLK, &msm_device_uart2.dev, 0), - CLK_PCOM("uart_clk", UART3_CLK, &msm_device_uart3.dev, OFF), + CLK_PCOM("uart_clk", UART1_CLK, "msm_serial.0", OFF), + CLK_PCOM("uart_clk", UART2_CLK, "msm_serial.1", 0), + CLK_PCOM("uart_clk", UART3_CLK, "msm_serial.2", OFF), CLK_PCOM("uart1dm_clk", UART1DM_CLK, NULL, OFF), CLK_PCOM("uart2dm_clk", UART2DM_CLK, NULL, 0), - CLK_PCOM("usb_hs_clk", USB_HS_CLK, &msm_device_hsusb.dev, OFF), - CLK_PCOM("usb_hs_pclk", USB_HS_P_CLK, &msm_device_hsusb.dev, OFF), + CLK_PCOM("usb_hs_clk", USB_HS_CLK, "msm_hsusb", OFF), + CLK_PCOM("usb_hs_pclk", USB_HS_P_CLK, "msm_hsusb", OFF), CLK_PCOM("usb_otg_clk", USB_OTG_CLK, NULL, 0), CLK_PCOM("vdc_clk", VDC_CLK, NULL, OFF ), CLK_PCOM("vfe_clk", VFE_CLK, NULL, OFF), diff --git a/arch/arm/mach-msm/devices-msm7x30.c b/arch/arm/mach-msm/devices-msm7x30.c index cd4343bcf73..09b4f140382 100644 --- a/arch/arm/mach-msm/devices-msm7x30.c +++ b/arch/arm/mach-msm/devices-msm7x30.c @@ -17,6 +17,7 @@ #include #include +#include #include #include #include @@ -129,7 +130,7 @@ struct platform_device msm_device_hsusb_host = { }, }; -struct clk msm_clocks_7x30[] = { +struct clk_lookup msm_clocks_7x30[] = { CLK_PCOM("adm_clk", ADM_CLK, NULL, 0), CLK_PCOM("adsp_clk", ADSP_CLK, NULL, 0), CLK_PCOM("cam_m_clk", CAM_M_CLK, NULL, 0), @@ -181,7 +182,7 @@ struct clk msm_clocks_7x30[] = { CLK_7X30S("tv_src_clk", TV_CLK, TV_ENC_CLK, NULL, 0), CLK_PCOM("tv_dac_clk", TV_DAC_CLK, NULL, 0), CLK_PCOM("tv_enc_clk", TV_ENC_CLK, NULL, 0), - CLK_PCOM("uart_clk", UART2_CLK, &msm_device_uart2.dev, 0), + CLK_PCOM("uart_clk", UART2_CLK, "msm_serial.1", 0), CLK_PCOM("usb_phy_clk", USB_PHY_CLK, NULL, 0), CLK_PCOM("usb_hs_clk", USB_HS_CLK, NULL, OFF), CLK_PCOM("usb_hs_pclk", USB_HS_P_CLK, NULL, OFF), diff --git a/arch/arm/mach-msm/devices-qsd8x50.c b/arch/arm/mach-msm/devices-qsd8x50.c index bd545f9e8c2..12d8deb78d9 100644 --- a/arch/arm/mach-msm/devices-qsd8x50.c +++ b/arch/arm/mach-msm/devices-qsd8x50.c @@ -15,8 +15,9 @@ #include #include - +#include #include + #include #include #include @@ -314,7 +315,7 @@ int __init msm_add_sdcc(unsigned int controller, return platform_device_register(pdev); } -struct clk msm_clocks_8x50[] = { +struct clk_lookup msm_clocks_8x50[] = { CLK_PCOM("adm_clk", ADM_CLK, NULL, 0), CLK_PCOM("ce_clk", CE_CLK, NULL, 0), CLK_PCOM("ebi1_clk", EBI1_CLK, NULL, CLK_MIN), @@ -336,14 +337,14 @@ struct clk msm_clocks_8x50[] = { CLK_PCOM("pbus_clk", PBUS_CLK, NULL, CLK_MIN), CLK_PCOM("pcm_clk", PCM_CLK, NULL, 0), CLK_PCOM("sdac_clk", SDAC_CLK, NULL, OFF), - CLK_PCOM("sdc_clk", SDC1_CLK, &msm_device_sdc1.dev, OFF), - CLK_PCOM("sdc_pclk", SDC1_P_CLK, &msm_device_sdc1.dev, OFF), - CLK_PCOM("sdc_clk", SDC2_CLK, &msm_device_sdc2.dev, OFF), - CLK_PCOM("sdc_pclk", SDC2_P_CLK, &msm_device_sdc2.dev, OFF), - CLK_PCOM("sdc_clk", SDC3_CLK, &msm_device_sdc3.dev, OFF), - CLK_PCOM("sdc_pclk", SDC3_P_CLK, &msm_device_sdc3.dev, OFF), - CLK_PCOM("sdc_clk", SDC4_CLK, &msm_device_sdc4.dev, OFF), - CLK_PCOM("sdc_pclk", SDC4_P_CLK, &msm_device_sdc4.dev, OFF), + CLK_PCOM("sdc_clk", SDC1_CLK, "msm_sdcc.1", OFF), + CLK_PCOM("sdc_pclk", SDC1_P_CLK, "msm_sdcc.1", OFF), + CLK_PCOM("sdc_clk", SDC2_CLK, "msm_sdcc.2", OFF), + CLK_PCOM("sdc_pclk", SDC2_P_CLK, "msm_sdcc.2", OFF), + CLK_PCOM("sdc_clk", SDC3_CLK, "msm_sdcc.3", OFF), + CLK_PCOM("sdc_pclk", SDC3_P_CLK, "msm_sdcc.3", OFF), + CLK_PCOM("sdc_clk", SDC4_CLK, "msm_sdcc.4", OFF), + CLK_PCOM("sdc_pclk", SDC4_P_CLK, "msm_sdcc.4", OFF), CLK_PCOM("spi_clk", SPI_CLK, NULL, 0), CLK_PCOM("tsif_clk", TSIF_CLK, NULL, 0), CLK_PCOM("tsif_ref_clk", TSIF_REF_CLK, NULL, 0), @@ -351,7 +352,7 @@ struct clk msm_clocks_8x50[] = { CLK_PCOM("tv_enc_clk", TV_ENC_CLK, NULL, 0), CLK_PCOM("uart_clk", UART1_CLK, NULL, OFF), CLK_PCOM("uart_clk", UART2_CLK, NULL, 0), - CLK_PCOM("uart_clk", UART3_CLK, &msm_device_uart3.dev, OFF), + CLK_PCOM("uart_clk", UART3_CLK, "msm_serial.2", OFF), CLK_PCOM("uartdm_clk", UART1DM_CLK, NULL, OFF), CLK_PCOM("uartdm_clk", UART2DM_CLK, NULL, 0), CLK_PCOM("usb_hs_clk", USB_HS_CLK, NULL, OFF), diff --git a/arch/arm/mach-msm/devices.h b/arch/arm/mach-msm/devices.h index e2643b340b2..9545c196c6e 100644 --- a/arch/arm/mach-msm/devices.h +++ b/arch/arm/mach-msm/devices.h @@ -16,6 +16,8 @@ #ifndef __ARCH_ARM_MACH_MSM_DEVICES_H #define __ARCH_ARM_MACH_MSM_DEVICES_H +#include + #include "clock.h" extern struct platform_device msm_device_uart1; @@ -44,13 +46,13 @@ extern struct platform_device msm_device_mddi0; extern struct platform_device msm_device_mddi1; extern struct platform_device msm_device_mdp; -extern struct clk msm_clocks_7x01a[]; +extern struct clk_lookup msm_clocks_7x01a[]; extern unsigned msm_num_clocks_7x01a; -extern struct clk msm_clocks_7x30[]; +extern struct clk_lookup msm_clocks_7x30[]; extern unsigned msm_num_clocks_7x30; -extern struct clk msm_clocks_8x50[]; +extern struct clk_lookup msm_clocks_8x50[]; extern unsigned msm_num_clocks_8x50; #endif diff --git a/arch/arm/mach-msm/include/mach/board.h b/arch/arm/mach-msm/include/mach/board.h index 6abf4a6eadc..2ce8f1f2fc4 100644 --- a/arch/arm/mach-msm/include/mach/board.h +++ b/arch/arm/mach-msm/include/mach/board.h @@ -31,7 +31,7 @@ struct msm_acpu_clock_platform_data unsigned long wait_for_irq_khz; }; -struct clk; +struct clk_lookup; extern struct sys_timer msm_timer; @@ -41,7 +41,7 @@ void __init msm_add_devices(void); void __init msm_map_common_io(void); void __init msm_init_irq(void); void __init msm_init_gpio(void); -void __init msm_clock_init(struct clk *clock_tbl, unsigned num_clocks); +void __init msm_clock_init(struct clk_lookup *clock_tbl, unsigned num_clocks); void __init msm_acpu_clock_init(struct msm_acpu_clock_platform_data *); int __init msm_add_sdcc(unsigned int controller, struct msm_mmc_platform_data *plat, diff --git a/arch/arm/mach-msm/include/mach/clkdev.h b/arch/arm/mach-msm/include/mach/clkdev.h new file mode 100644 index 00000000000..f87a57b5953 --- /dev/null +++ b/arch/arm/mach-msm/include/mach/clkdev.h @@ -0,0 +1,19 @@ +/* Copyright (c) 2011, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __ASM_ARCH_MSM_CLKDEV_H +#define __ASM_ARCH_MSM_CLKDEV_H + +struct clk; + +static inline int __clk_get(struct clk *clk) { return 1; } +static inline void __clk_put(struct clk *clk) { } +#endif -- cgit v1.2.3-18-g5258 From 569edd705cc4e81a9129b5557f1fb259e21418a9 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 23 Feb 2011 00:14:06 -0700 Subject: OMAP2+: hwmod: find MPU initiator hwmod during in _register() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Move the code that looks for the MPU initiator hwmod to run during the individual hwmod _register() function. (Previously, it ran after all hwmods were registered in the omap_hwmod_late_init() function.) This is done so code can late-initialize a few individual hwmods -- for example, for the system timer -- before the entire set of hwmods is initialized later in boot via omap_hwmod_late_init(). Signed-off-by: Paul Walmsley Cc: Benoît Cousson Cc: Kevin Hilman --- arch/arm/mach-omap2/omap_hwmod.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 557d9eb609a..e4c934bd25b 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1452,7 +1452,7 @@ static int _setup(struct omap_hwmod *oh, void *data) */ static int __init _register(struct omap_hwmod *oh) { - int ret, ms_id; + int ms_id; if (!oh || !oh->name || !oh->class || !oh->class->name || (oh->_state != _HWMOD_STATE_UNKNOWN)) @@ -1475,9 +1475,14 @@ static int __init _register(struct omap_hwmod *oh) oh->_state = _HWMOD_STATE_REGISTERED; - ret = 0; + /* + * XXX Rather than doing a strcmp(), this should test a flag + * set in the hwmod data, inserted by the autogenerator code. + */ + if (!strcmp(oh->name, MPU_INITIATOR_NAME)) + mpu_oh = oh; - return ret; + return 0; } @@ -1632,22 +1637,24 @@ static int __init _populate_mpu_rt_base(struct omap_hwmod *oh, void *data) * * Must be called after omap2_clk_init(). Resolves the struct clk names * to struct clk pointers for each registered omap_hwmod. Also calls - * _setup() on each hwmod. Returns 0. + * _setup() on each hwmod. Returns 0 upon success or -EINVAL upon error. */ static int __init omap_hwmod_setup_all(void) { int r; + if (!mpu_oh) { + pr_err("omap_hwmod: %s: MPU initiator hwmod %s not yet registered\n", + __func__, MPU_INITIATOR_NAME); + return -EINVAL; + } + r = omap_hwmod_for_each(_populate_mpu_rt_base, NULL); /* XXX check return value */ r = omap_hwmod_for_each(_init_clocks, NULL); WARN(r, "omap_hwmod: %s: _init_clocks failed\n", __func__); - mpu_oh = omap_hwmod_lookup(MPU_INITIATOR_NAME); - WARN(!mpu_oh, "omap_hwmod: could not find MPU initiator hwmod %s\n", - MPU_INITIATOR_NAME); - omap_hwmod_for_each(_setup, NULL); return 0; -- cgit v1.2.3-18-g5258 From 48d54f3fd20b435311f295b3bca3570096a2ac83 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 23 Feb 2011 00:14:07 -0700 Subject: OMAP2+: hwmod: ignore attempts to re-setup a hwmod MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Previously, if a hwmod had already been set up, and the code attempted to set up the hwmod again, an error would be returned. This is not really useful behavior if we wish to allow the OMAP core code to setup the hwmods needed for the Linux clocksources and clockevents before the rest of the hwmods are setup. So, instead of generating errors, just ignore the attempt to re-setup the hwmod. Signed-off-by: Paul Walmsley Cc: Benoît Cousson Cc: Kevin Hilman --- arch/arm/mach-omap2/omap_hwmod.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index e4c934bd25b..43aa894174f 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -902,17 +902,15 @@ static struct omap_hwmod *_lookup(const char *name) * @data: not used; pass NULL * * Called by omap_hwmod_setup_all() (after omap2_clk_init()). - * Resolves all clock names embedded in the hwmod. Returns -EINVAL if - * the omap_hwmod has not yet been registered or if the clocks have - * already been initialized, 0 on success, or a non-zero error on - * failure. + * Resolves all clock names embedded in the hwmod. Returns 0 on + * success, or a negative error code on failure. */ static int _init_clocks(struct omap_hwmod *oh, void *data) { int ret = 0; - if (!oh || (oh->_state != _HWMOD_STATE_REGISTERED)) - return -EINVAL; + if (oh->_state != _HWMOD_STATE_REGISTERED) + return 0; pr_debug("omap_hwmod: %s: looking up clocks\n", oh->name); @@ -1351,14 +1349,16 @@ static int _shutdown(struct omap_hwmod *oh) * @oh: struct omap_hwmod * * * Writes the CLOCKACTIVITY bits @clockact to the hwmod @oh - * OCP_SYSCONFIG register. Returns -EINVAL if the hwmod is in the - * wrong state or returns 0. + * OCP_SYSCONFIG register. Returns 0. */ static int _setup(struct omap_hwmod *oh, void *data) { int i, r; u8 postsetup_state; + if (oh->_state != _HWMOD_STATE_CLKS_INITED) + return 0; + /* Set iclk autoidle mode */ if (oh->slaves_cnt > 0) { for (i = 0; i < oh->slaves_cnt; i++) { @@ -1621,6 +1621,9 @@ int __init omap_hwmod_register(struct omap_hwmod **ohs) */ static int __init _populate_mpu_rt_base(struct omap_hwmod *oh, void *data) { + if (oh->_state != _HWMOD_STATE_REGISTERED) + return 0; + if (oh->_int_flags & _HWMOD_NO_MPU_PORT) return 0; -- cgit v1.2.3-18-g5258 From a2debdbd1ad896a410019c9cf30785cad15930fc Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 23 Feb 2011 00:14:07 -0700 Subject: OMAP2+: hwmod: add ability to setup individual hwmods MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add omap_hwmod_setup_one(), which is intended for use early in boot to selectively setup the hwmods needed for system clocksources and clockevents, and any other hwmod that is needed in early boot. omap_hwmod_setup_all() can then be called later in the boot process. The point is to minimize the amount of code that needs to be run early. Signed-off-by: Paul Walmsley Cc: Benoît Cousson Cc: Kevin Hilman Cc: Santosh Shilimkar Cc: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod.c | 62 ++++++++++++++++++++++++---- arch/arm/plat-omap/include/plat/omap_hwmod.h | 3 ++ 2 files changed, 58 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 43aa894174f..f76f133780c 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -901,7 +901,7 @@ static struct omap_hwmod *_lookup(const char *name) * @oh: struct omap_hwmod * * @data: not used; pass NULL * - * Called by omap_hwmod_setup_all() (after omap2_clk_init()). + * Called by omap_hwmod_setup_*() (after omap2_clk_init()). * Resolves all clock names embedded in the hwmod. Returns 0 on * success, or a negative error code on failure. */ @@ -1616,7 +1616,7 @@ int __init omap_hwmod_register(struct omap_hwmod **ohs) /* * _populate_mpu_rt_base - populate the virtual address for a hwmod * - * Must be called only from omap_hwmod_setup_all() so ioremap works properly. + * Must be called only from omap_hwmod_setup_*() so ioremap works properly. * Assumes the caller takes care of locking if needed. */ static int __init _populate_mpu_rt_base(struct omap_hwmod *oh, void *data) @@ -1635,12 +1635,60 @@ static int __init _populate_mpu_rt_base(struct omap_hwmod *oh, void *data) return 0; } +/** + * omap_hwmod_setup_one - set up a single hwmod + * @oh_name: const char * name of the already-registered hwmod to set up + * + * Must be called after omap2_clk_init(). Resolves the struct clk + * names to struct clk pointers for each registered omap_hwmod. Also + * calls _setup() on each hwmod. Returns -EINVAL upon error or 0 upon + * success. + */ +int __init omap_hwmod_setup_one(const char *oh_name) +{ + struct omap_hwmod *oh; + int r; + + pr_debug("omap_hwmod: %s: %s\n", oh_name, __func__); + + if (!mpu_oh) { + pr_err("omap_hwmod: %s: cannot setup_one: MPU initiator hwmod %s not yet registered\n", + oh_name, MPU_INITIATOR_NAME); + return -EINVAL; + } + + oh = _lookup(oh_name); + if (!oh) { + WARN(1, "omap_hwmod: %s: hwmod not yet registered\n", oh_name); + return -EINVAL; + } + + if (mpu_oh->_state == _HWMOD_STATE_REGISTERED && oh != mpu_oh) + omap_hwmod_setup_one(MPU_INITIATOR_NAME); + + r = _populate_mpu_rt_base(oh, NULL); + if (IS_ERR_VALUE(r)) { + WARN(1, "omap_hwmod: %s: couldn't set mpu_rt_base\n", oh_name); + return -EINVAL; + } + + r = _init_clocks(oh, NULL); + if (IS_ERR_VALUE(r)) { + WARN(1, "omap_hwmod: %s: couldn't init clocks\n", oh_name); + return -EINVAL; + } + + _setup(oh, NULL); + + return 0; +} + /** * omap_hwmod_setup - do some post-clock framework initialization * * Must be called after omap2_clk_init(). Resolves the struct clk names * to struct clk pointers for each registered omap_hwmod. Also calls - * _setup() on each hwmod. Returns 0 upon success or -EINVAL upon error. + * _setup() on each hwmod. Returns 0 upon success. */ static int __init omap_hwmod_setup_all(void) { @@ -1654,9 +1702,9 @@ static int __init omap_hwmod_setup_all(void) r = omap_hwmod_for_each(_populate_mpu_rt_base, NULL); - /* XXX check return value */ r = omap_hwmod_for_each(_init_clocks, NULL); - WARN(r, "omap_hwmod: %s: _init_clocks failed\n", __func__); + WARN(IS_ERR_VALUE(r), + "omap_hwmod: %s: _init_clocks failed\n", __func__); omap_hwmod_for_each(_setup, NULL); @@ -2182,8 +2230,8 @@ int omap_hwmod_for_each_by_class(const char *classname, * @state: state that _setup() should leave the hwmod in * * Sets the hwmod state that @oh will enter at the end of _setup() - * (called by omap_hwmod_setup_all()). Only valid to call between - * calling omap_hwmod_register() and omap_hwmod_setup_all(). Returns + * (called by omap_hwmod_setup_*()). Only valid to call between + * calling omap_hwmod_register() and omap_hwmod_setup_*(). Returns * 0 upon success or -EINVAL if there is a problem with the arguments * or if the hwmod is in the wrong state. */ diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index afdf1971c51..f96e72ed4db 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -30,6 +30,7 @@ #define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H #include +#include #include #include #include @@ -542,6 +543,8 @@ struct omap_hwmod *omap_hwmod_lookup(const char *name); int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data), void *data); +int __init omap_hwmod_setup_one(const char *name); + int omap_hwmod_enable(struct omap_hwmod *oh); int _omap_hwmod_enable(struct omap_hwmod *oh); int omap_hwmod_idle(struct omap_hwmod *oh); -- cgit v1.2.3-18-g5258 From 38698bef545403a334cf92153874bd06dc22cc66 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 23 Feb 2011 00:14:08 -0700 Subject: OMAP2+: clockevent: set up GPTIMER clockevent hwmod right before timer init MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Set up the GPTIMER hwmod used for the clockevent source immediately before it is used. This avoids the need to set up all of the hwmods until the boot process is further along. (In general, we want to defer as much as possible until late in the boot process.) This second version fixes a bug pointed out by Santosh Shilimkar , that would cause the kernel to use an incorrect timer hwmod name if the selected GPTIMER was not 1 or 12 - thanks Santosh. Also, Tarun Kanti DebBarma pointed out that the original patch did not apply cleanly; this has now been fixed. Signed-off-by: Paul Walmsley Cc: Benoît Cousson Cc: Tony Lindgren Cc: Kevin Hilman Cc: Santosh Shilimkar Acked-by: Santosh Shilimkar Cc: Tarun Kanti DebBarma --- arch/arm/mach-omap2/timer-gp.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index 7b7c2683ae7..fb8d656e4d0 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -39,10 +39,11 @@ #include #include #include +#include +#include #include "timer-gp.h" -#include /* MAX_GPTIMER_ID: number of GPTIMERs on the chip */ #define MAX_GPTIMER_ID 12 @@ -132,9 +133,13 @@ static void __init omap2_gp_clockevent_init(void) { u32 tick_rate; int src; + char clockevent_hwmod_name[8]; /* 8 = sizeof("timerXX0") */ inited = 1; + sprintf(clockevent_hwmod_name, "timer%d", gptimer_id); + omap_hwmod_setup_one(clockevent_hwmod_name); + gptimer = omap_dm_timer_request_specific(gptimer_id); BUG_ON(gptimer == NULL); gptimer_wakeup = gptimer; -- cgit v1.2.3-18-g5258 From b3d1ffb2a5294c74fcf1579499115e1e33b8f487 Mon Sep 17 00:00:00 2001 From: "Rajashekhara, Sudhakar" Date: Fri, 21 Jan 2011 21:13:06 +0530 Subject: davinci: da8xx/omap-l1x: add platform device for davinci-pcm-audio After the multi-component commit f0fba2ad (ASoC: multi-component - ASoC Multi-Component Support) for ASoC, we need to register the platform device for davinci-pcm-audio. This patch and patch at [1] are required for audio to work on DA850/OMAP-L138. [1] https://patchwork.kernel.org/patch/495211/ Signed-off-by: Rajashekhara, Sudhakar Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/devices-da8xx.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 9eec63070e0..beda8a4133a 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -480,8 +480,15 @@ static struct platform_device da850_mcasp_device = { .resource = da850_mcasp_resources, }; +struct platform_device davinci_pcm_device = { + .name = "davinci-pcm-audio", + .id = -1, +}; + void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata) { + platform_device_register(&davinci_pcm_device); + /* DA830/OMAP-L137 has 3 instances of McASP */ if (cpu_is_davinci_da830() && id == 1) { da830_mcasp1_device.dev.platform_data = pdata; -- cgit v1.2.3-18-g5258 From c284d9fa48e1ad17bda142cfbb683c29a3b005a6 Mon Sep 17 00:00:00 2001 From: Hirosh Dabui Date: Tue, 25 Jan 2011 23:05:26 +0100 Subject: davinci: tnetv107x: fix register indexing for GPIOs numbers > 31 This patch fix a bug in the register indexing for GPIOs numbers > 31 to get the relevant hardware registers of tnetv107x to control the GPIOs. In the structure tnetv107x_gpio_regs: struct tnetv107x_gpio_regs { u32 idver; u32 data_in[3]; u32 data_out[3]; u32 direction[3]; u32 enable[3]; }; The GPIO hardware register addresses of tnetv107x are stored. The chip implements 3 registers of each entity to serve 96 GPIOs, each register provides a subset of 32 GPIOs. The driver provides these macros: gpio_reg_set_bit, gpio_reg_get_bit and gpio_reg_clear_bit. The bug implied the use of macros to access the relevant hardware register e.g. the driver code used the macro like this: 'gpio_reg_clear_bit(®->data_out, gpio)' But it has to be used like this: 'gpio_reg_clear_bit(reg->data_out, gpio)'. The different results are shown here: - ®->data_out + 1 (it will add the full array size of data_out i.e. 12 bytes) - reg->data_out + 1 (it will increment only the size of data_out i.e. only 4 bytes) Acked-by: Cyril Chemparathy Signed-off-by: Hirosh Dabui Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/gpio-tnetv107x.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/gpio-tnetv107x.c b/arch/arm/mach-davinci/gpio-tnetv107x.c index d10298620e2..3fa3e2867e1 100644 --- a/arch/arm/mach-davinci/gpio-tnetv107x.c +++ b/arch/arm/mach-davinci/gpio-tnetv107x.c @@ -58,7 +58,7 @@ static int tnetv107x_gpio_request(struct gpio_chip *chip, unsigned offset) spin_lock_irqsave(&ctlr->lock, flags); - gpio_reg_set_bit(®s->enable, gpio); + gpio_reg_set_bit(regs->enable, gpio); spin_unlock_irqrestore(&ctlr->lock, flags); @@ -74,7 +74,7 @@ static void tnetv107x_gpio_free(struct gpio_chip *chip, unsigned offset) spin_lock_irqsave(&ctlr->lock, flags); - gpio_reg_clear_bit(®s->enable, gpio); + gpio_reg_clear_bit(regs->enable, gpio); spin_unlock_irqrestore(&ctlr->lock, flags); } @@ -88,7 +88,7 @@ static int tnetv107x_gpio_dir_in(struct gpio_chip *chip, unsigned offset) spin_lock_irqsave(&ctlr->lock, flags); - gpio_reg_set_bit(®s->direction, gpio); + gpio_reg_set_bit(regs->direction, gpio); spin_unlock_irqrestore(&ctlr->lock, flags); @@ -106,11 +106,11 @@ static int tnetv107x_gpio_dir_out(struct gpio_chip *chip, spin_lock_irqsave(&ctlr->lock, flags); if (value) - gpio_reg_set_bit(®s->data_out, gpio); + gpio_reg_set_bit(regs->data_out, gpio); else - gpio_reg_clear_bit(®s->data_out, gpio); + gpio_reg_clear_bit(regs->data_out, gpio); - gpio_reg_clear_bit(®s->direction, gpio); + gpio_reg_clear_bit(regs->direction, gpio); spin_unlock_irqrestore(&ctlr->lock, flags); @@ -124,7 +124,7 @@ static int tnetv107x_gpio_get(struct gpio_chip *chip, unsigned offset) unsigned gpio = chip->base + offset; int ret; - ret = gpio_reg_get_bit(®s->data_in, gpio); + ret = gpio_reg_get_bit(regs->data_in, gpio); return ret ? 1 : 0; } @@ -140,9 +140,9 @@ static void tnetv107x_gpio_set(struct gpio_chip *chip, spin_lock_irqsave(&ctlr->lock, flags); if (value) - gpio_reg_set_bit(®s->data_out, gpio); + gpio_reg_set_bit(regs->data_out, gpio); else - gpio_reg_clear_bit(®s->data_out, gpio); + gpio_reg_clear_bit(regs->data_out, gpio); spin_unlock_irqrestore(&ctlr->lock, flags); } -- cgit v1.2.3-18-g5258 From bb59b7fdc1aacde27a1d6254f1e647a794fa7735 Mon Sep 17 00:00:00 2001 From: Victor Rodriguez Date: Mon, 27 Dec 2010 16:43:08 -0600 Subject: davinci: EMAC support for Omapl138-Hawkboard This patch adds EMAC support for the Hawkboard-L138 system Signed-off-by: Victor Rodriguez Tested-by: Rene Gonzalez Acked-by: Sekhar Nori Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-omapl138-hawk.c | 43 +++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index 0b8dbdb79fe..75b3fe23ee6 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -19,6 +19,47 @@ #include #include +#include + +#define HAWKBOARD_PHY_ID "0:07" + +static short omapl138_hawk_mii_pins[] __initdata = { + DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3, + DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER, + DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3, + DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK, + DA850_MDIO_D, + -1 +}; + +static __init void omapl138_hawk_config_emac(void) +{ + void __iomem *cfgchip3 = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG); + int ret; + u32 val; + struct davinci_soc_info *soc_info = &davinci_soc_info; + + val = __raw_readl(cfgchip3); + val &= ~BIT(8); + ret = davinci_cfg_reg_list(omapl138_hawk_mii_pins); + if (ret) { + pr_warning("%s: cpgmac/mii mux setup failed: %d\n", + __func__, ret); + return; + } + + /* configure the CFGCHIP3 register for MII */ + __raw_writel(val, cfgchip3); + pr_info("EMAC: MII PHY configured\n"); + + soc_info->emac_pdata->phy_id = HAWKBOARD_PHY_ID; + + ret = da8xx_register_emac(); + if (ret) + pr_warning("%s: emac registration failed: %d\n", + __func__, ret); +} + static struct davinci_uart_config omapl138_hawk_uart_config __initdata = { .enabled_uarts = 0x7, @@ -30,6 +71,8 @@ static __init void omapl138_hawk_init(void) davinci_serial_init(&omapl138_hawk_uart_config); + omapl138_hawk_config_emac(); + ret = da8xx_register_watchdog(); if (ret) pr_warning("omapl138_hawk_init: " -- cgit v1.2.3-18-g5258 From 5f72f380093afd378259e4a50f9fa2380457b70b Mon Sep 17 00:00:00 2001 From: Victor Rodriguez Date: Mon, 27 Dec 2010 16:43:09 -0600 Subject: davinci: EDMA support for Omapl138-Hawkboard This patch adds EDMA support for the Hawkboard-L138 system Signed-off-by: Victor Rodriguez Tested-by: Rene Gonzalez Acked-by: Sekhar Nori Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-omapl138-hawk.c | 54 +++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index 75b3fe23ee6..cefff9b86f7 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -60,6 +60,55 @@ static __init void omapl138_hawk_config_emac(void) __func__, ret); } +/* + * The following EDMA channels/slots are not being used by drivers (for + * example: Timer, GPIO, UART events etc) on da850/omap-l138 EVM/Hawkboard, + * hence they are being reserved for codecs on the DSP side. + */ +static const s16 da850_dma0_rsv_chans[][2] = { + /* (offset, number) */ + { 8, 6}, + {24, 4}, + {30, 2}, + {-1, -1} +}; + +static const s16 da850_dma0_rsv_slots[][2] = { + /* (offset, number) */ + { 8, 6}, + {24, 4}, + {30, 50}, + {-1, -1} +}; + +static const s16 da850_dma1_rsv_chans[][2] = { + /* (offset, number) */ + { 0, 28}, + {30, 2}, + {-1, -1} +}; + +static const s16 da850_dma1_rsv_slots[][2] = { + /* (offset, number) */ + { 0, 28}, + {30, 90}, + {-1, -1} +}; + +static struct edma_rsv_info da850_edma_cc0_rsv = { + .rsv_chans = da850_dma0_rsv_chans, + .rsv_slots = da850_dma0_rsv_slots, +}; + +static struct edma_rsv_info da850_edma_cc1_rsv = { + .rsv_chans = da850_dma1_rsv_chans, + .rsv_slots = da850_dma1_rsv_slots, +}; + +static struct edma_rsv_info *da850_edma_rsv[2] = { + &da850_edma_cc0_rsv, + &da850_edma_cc1_rsv, +}; static struct davinci_uart_config omapl138_hawk_uart_config __initdata = { .enabled_uarts = 0x7, @@ -73,6 +122,11 @@ static __init void omapl138_hawk_init(void) omapl138_hawk_config_emac(); + ret = da850_register_edma(da850_edma_rsv); + if (ret) + pr_warning("%s: EDMA registration failed: %d\n", + __func__, ret); + ret = da8xx_register_watchdog(); if (ret) pr_warning("omapl138_hawk_init: " -- cgit v1.2.3-18-g5258 From fe358d6a049dcd7cd52b0eb6ae5c8bddf223d41b Mon Sep 17 00:00:00 2001 From: Victor Rodriguez Date: Mon, 27 Dec 2010 16:43:10 -0600 Subject: davinci: MMC/SD and USB-OHCI configuration for Omapl138-Hawkboard This patch defines Pin Mux configuration to enable MMC/SD and USB-OHCI on the Hawkboard-L138 system Signed-off-by: Victor Rodriguez Tested-by: Rene Gonzalez Acked-by: Sekhar Nori Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/da850.c | 4 ++++ arch/arm/mach-davinci/include/mach/mux.h | 4 ++++ 2 files changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 78b5ae29ae4..f55a60f3426 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -543,11 +543,15 @@ static const struct mux_config da850_pins[] = { MUX_CFG(DA850, EMA_WAIT_1, 6, 24, 15, 1, false) MUX_CFG(DA850, NEMA_CS_2, 7, 0, 15, 1, false) /* GPIO function */ + MUX_CFG(DA850, GPIO2_4, 6, 12, 15, 8, false) MUX_CFG(DA850, GPIO2_6, 6, 4, 15, 8, false) MUX_CFG(DA850, GPIO2_8, 5, 28, 15, 8, false) MUX_CFG(DA850, GPIO2_15, 5, 0, 15, 8, false) + MUX_CFG(DA850, GPIO3_12, 7, 12, 15, 8, false) + MUX_CFG(DA850, GPIO3_13, 7, 8, 15, 8, false) MUX_CFG(DA850, GPIO4_0, 10, 28, 15, 8, false) MUX_CFG(DA850, GPIO4_1, 10, 24, 15, 8, false) + MUX_CFG(DA850, GPIO6_13, 13, 8, 15, 8, false) MUX_CFG(DA850, RTC_ALARM, 0, 28, 15, 2, false) #endif }; diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h index de11aac76a8..5d4e0fed828 100644 --- a/arch/arm/mach-davinci/include/mach/mux.h +++ b/arch/arm/mach-davinci/include/mach/mux.h @@ -908,11 +908,15 @@ enum davinci_da850_index { DA850_NEMA_CS_2, /* GPIO function */ + DA850_GPIO2_4, DA850_GPIO2_6, DA850_GPIO2_8, DA850_GPIO2_15, + DA850_GPIO3_12, + DA850_GPIO3_13, DA850_GPIO4_0, DA850_GPIO4_1, + DA850_GPIO6_13, DA850_RTC_ALARM, }; -- cgit v1.2.3-18-g5258 From ef782d8d4e80b25a56d8cb93d648dd125e6ea95e Mon Sep 17 00:00:00 2001 From: Victor Rodriguez Date: Mon, 27 Dec 2010 16:43:11 -0600 Subject: davinci: MMC/SD support for Omapl138-Hawkboard This patch adds MMC/SD support for the Hawkboard-L138 system Signed-off-by: Victor Rodriguez Tested-by: Rene Gonzalez Acked-by: Sekhar Nori Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-omapl138-hawk.c | 72 +++++++++++++++++++++++++++++ 1 file changed, 72 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index cefff9b86f7..eeb1cad0250 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -22,6 +22,8 @@ #include #define HAWKBOARD_PHY_ID "0:07" +#define DA850_HAWK_MMCSD_CD_PIN GPIO_TO_PIN(3, 12) +#define DA850_HAWK_MMCSD_WP_PIN GPIO_TO_PIN(3, 13) static short omapl138_hawk_mii_pins[] __initdata = { DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3, @@ -110,6 +112,74 @@ static struct edma_rsv_info *da850_edma_rsv[2] = { &da850_edma_cc1_rsv, }; +static const short hawk_mmcsd0_pins[] = { + DA850_MMCSD0_DAT_0, DA850_MMCSD0_DAT_1, DA850_MMCSD0_DAT_2, + DA850_MMCSD0_DAT_3, DA850_MMCSD0_CLK, DA850_MMCSD0_CMD, + DA850_GPIO3_12, DA850_GPIO3_13, + -1 +}; + +static int da850_hawk_mmc_get_ro(int index) +{ + return gpio_get_value(DA850_HAWK_MMCSD_WP_PIN); +} + +static int da850_hawk_mmc_get_cd(int index) +{ + return !gpio_get_value(DA850_HAWK_MMCSD_CD_PIN); +} + +static struct davinci_mmc_config da850_mmc_config = { + .get_ro = da850_hawk_mmc_get_ro, + .get_cd = da850_hawk_mmc_get_cd, + .wires = 4, + .max_freq = 50000000, + .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, + .version = MMC_CTLR_VERSION_2, +}; + +static __init void omapl138_hawk_mmc_init(void) +{ + int ret; + + ret = davinci_cfg_reg_list(hawk_mmcsd0_pins); + if (ret) { + pr_warning("%s: MMC/SD0 mux setup failed: %d\n", + __func__, ret); + return; + } + + ret = gpio_request_one(DA850_HAWK_MMCSD_CD_PIN, + GPIOF_DIR_IN, "MMC CD"); + if (ret < 0) { + pr_warning("%s: can not open GPIO %d\n", + __func__, DA850_HAWK_MMCSD_CD_PIN); + return; + } + + ret = gpio_request_one(DA850_HAWK_MMCSD_WP_PIN, + GPIOF_DIR_IN, "MMC WP"); + if (ret < 0) { + pr_warning("%s: can not open GPIO %d\n", + __func__, DA850_HAWK_MMCSD_WP_PIN); + goto mmc_setup_wp_fail; + } + + ret = da8xx_register_mmcsd0(&da850_mmc_config); + if (ret) { + pr_warning("%s: MMC/SD0 registration failed: %d\n", + __func__, ret); + goto mmc_setup_mmcsd_fail; + } + + return; + +mmc_setup_mmcsd_fail: + gpio_free(DA850_HAWK_MMCSD_WP_PIN); +mmc_setup_wp_fail: + gpio_free(DA850_HAWK_MMCSD_CD_PIN); +} + static struct davinci_uart_config omapl138_hawk_uart_config __initdata = { .enabled_uarts = 0x7, }; @@ -127,6 +197,8 @@ static __init void omapl138_hawk_init(void) pr_warning("%s: EDMA registration failed: %d\n", __func__, ret); + omapl138_hawk_mmc_init(); + ret = da8xx_register_watchdog(); if (ret) pr_warning("omapl138_hawk_init: " -- cgit v1.2.3-18-g5258 From 5efe330ac19ff63c257db1ab120234cca01a8079 Mon Sep 17 00:00:00 2001 From: Victor Rodriguez Date: Mon, 27 Dec 2010 16:43:12 -0600 Subject: davinci: USB clocks for Omapl138-Hawkboard This patch adds USB1.1 and USB2.0 clocks for the Hawkboard-L138 system Signed-off-by: Victor Rodriguez Tested-by: Rene Gonzalez Acked-by: Sekhar Nori Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/da850.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index f55a60f3426..c7417a4caea 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -345,6 +345,20 @@ static struct clk aemif_clk = { .flags = ALWAYS_ENABLED, }; +static struct clk usb11_clk = { + .name = "usb11", + .parent = &pll0_sysclk4, + .lpsc = DA8XX_LPSC1_USB11, + .gpsc = 1, +}; + +static struct clk usb20_clk = { + .name = "usb20", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC1_USB20, + .gpsc = 1, +}; + static struct clk_lookup da850_clks[] = { CLK(NULL, "ref", &ref_clk), CLK(NULL, "pll0", &pll0_clk), @@ -387,6 +401,8 @@ static struct clk_lookup da850_clks[] = { CLK("davinci_mmc.0", NULL, &mmcsd0_clk), CLK("davinci_mmc.1", NULL, &mmcsd1_clk), CLK(NULL, "aemif", &aemif_clk), + CLK(NULL, "usb11", &usb11_clk), + CLK(NULL, "usb20", &usb20_clk), CLK(NULL, NULL, NULL), }; -- cgit v1.2.3-18-g5258 From f5714abba6668d2790fd2ac708aabd9506d3baf4 Mon Sep 17 00:00:00 2001 From: Victor Rodriguez Date: Mon, 27 Dec 2010 16:43:13 -0600 Subject: davinci: USB1.1 support for Omapl138-Hawkboard This patch adds USB1.1 support for the Hawkboard-L138 system Signed-off-by: Victor Rodriguez Tested-by: Rene Gonzalez Acked-by: Sekhar Nori Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-omapl138-hawk.c | 115 ++++++++++++++++++++++++++++ 1 file changed, 115 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index eeb1cad0250..67c38d0ecd1 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -25,6 +25,9 @@ #define DA850_HAWK_MMCSD_CD_PIN GPIO_TO_PIN(3, 12) #define DA850_HAWK_MMCSD_WP_PIN GPIO_TO_PIN(3, 13) +#define DA850_USB1_VBUS_PIN GPIO_TO_PIN(2, 4) +#define DA850_USB1_OC_PIN GPIO_TO_PIN(6, 13) + static short omapl138_hawk_mii_pins[] __initdata = { DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3, DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER, @@ -180,6 +183,116 @@ mmc_setup_wp_fail: gpio_free(DA850_HAWK_MMCSD_CD_PIN); } +static irqreturn_t omapl138_hawk_usb_ocic_irq(int irq, void *dev_id); +static da8xx_ocic_handler_t hawk_usb_ocic_handler; + +static const short da850_hawk_usb11_pins[] = { + DA850_GPIO2_4, DA850_GPIO6_13, + -1 +}; + +static int hawk_usb_set_power(unsigned port, int on) +{ + gpio_set_value(DA850_USB1_VBUS_PIN, on); + return 0; +} + +static int hawk_usb_get_power(unsigned port) +{ + return gpio_get_value(DA850_USB1_VBUS_PIN); +} + +static int hawk_usb_get_oci(unsigned port) +{ + return !gpio_get_value(DA850_USB1_OC_PIN); +} + +static int hawk_usb_ocic_notify(da8xx_ocic_handler_t handler) +{ + int irq = gpio_to_irq(DA850_USB1_OC_PIN); + int error = 0; + + if (handler != NULL) { + hawk_usb_ocic_handler = handler; + + error = request_irq(irq, omapl138_hawk_usb_ocic_irq, + IRQF_DISABLED | IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING, + "OHCI over-current indicator", NULL); + if (error) + pr_err("%s: could not request IRQ to watch " + "over-current indicator changes\n", __func__); + } else { + free_irq(irq, NULL); + } + return error; +} + +static struct da8xx_ohci_root_hub omapl138_hawk_usb11_pdata = { + .set_power = hawk_usb_set_power, + .get_power = hawk_usb_get_power, + .get_oci = hawk_usb_get_oci, + .ocic_notify = hawk_usb_ocic_notify, + /* TPS2087 switch @ 5V */ + .potpgt = (3 + 1) / 2, /* 3 ms max */ +}; + +static irqreturn_t omapl138_hawk_usb_ocic_irq(int irq, void *dev_id) +{ + hawk_usb_ocic_handler(&omapl138_hawk_usb11_pdata, 1); + return IRQ_HANDLED; +} + +static __init void omapl138_hawk_usb_init(void) +{ + int ret; + u32 cfgchip2; + + ret = davinci_cfg_reg_list(da850_hawk_usb11_pins); + if (ret) { + pr_warning("%s: USB 1.1 PinMux setup failed: %d\n", + __func__, ret); + return; + } + + /* Setup the Ref. clock frequency for the HAWK at 24 MHz. */ + + cfgchip2 = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); + cfgchip2 &= ~CFGCHIP2_REFFREQ; + cfgchip2 |= CFGCHIP2_REFFREQ_24MHZ; + __raw_writel(cfgchip2, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); + + ret = gpio_request_one(DA850_USB1_VBUS_PIN, + GPIOF_DIR_OUT, "USB1 VBUS"); + if (ret < 0) { + pr_err("%s: failed to request GPIO for USB 1.1 port " + "power control: %d\n", __func__, ret); + return; + } + + ret = gpio_request_one(DA850_USB1_OC_PIN, + GPIOF_DIR_IN, "USB1 OC"); + if (ret < 0) { + pr_err("%s: failed to request GPIO for USB 1.1 port " + "over-current indicator: %d\n", __func__, ret); + goto usb11_setup_oc_fail; + } + + ret = da8xx_register_usb11(&omapl138_hawk_usb11_pdata); + if (ret) { + pr_warning("%s: USB 1.1 registration failed: %d\n", + __func__, ret); + goto usb11_setup_fail; + } + + return; + +usb11_setup_fail: + gpio_free(DA850_USB1_OC_PIN); +usb11_setup_oc_fail: + gpio_free(DA850_USB1_VBUS_PIN); +} + static struct davinci_uart_config omapl138_hawk_uart_config __initdata = { .enabled_uarts = 0x7, }; @@ -199,6 +312,8 @@ static __init void omapl138_hawk_init(void) omapl138_hawk_mmc_init(); + omapl138_hawk_usb_init(); + ret = da8xx_register_watchdog(); if (ret) pr_warning("omapl138_hawk_init: " -- cgit v1.2.3-18-g5258 From cbb691fb89ae01fde4ccce3b7351a0fa9fe1a47b Mon Sep 17 00:00:00 2001 From: Sudhakar Rajashekhara Date: Mon, 3 Jan 2011 08:03:27 -0500 Subject: davinci: Add additional JTAG code for AM-1808 and OMAP-L138 Rev 2.0 SoCs From: Sudhakar Rajashekhara The JTAG variant code for Rev-2.0 silicon of the OMAP-L138 has changed. In addition, the variant code for the AM-1808 SoC appears to match the Rev-2.0 code for the OMAP-L138. Add an additional entry to support these chips. This patch is originally from a patch on the arago project, here: http://arago-project.org/git/projects/?p=linux-omapl1.git;a=commit;h=6157618435e313a444cdf059702bd34036a6e2b7 Further information related to the need for this patch can be located at http://e2e.ti.com/support/embedded/f/354/p/67290/248486.aspx http://linux.davincidsp.com/pipermail/davinci-linux-open-source/2010-November/021224.html This patch was tested using an AM-1808 SoC on a MityARM-1808 SoM card. It was also tested using a Rev 1.0 silicon OMAP-L138 on a MityDSP-L138F card. Signed-off-by: Sudhakar Rajashekhara Signed-off-by: Michael Williamson Tested-by: Michael Williamson Reported-by: Nicolas Luna Reviewed-by: Sekhar Nori Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/da850.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index c7417a4caea..703e81f8b24 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -784,6 +784,13 @@ static struct davinci_id da850_ids[] = { .cpu_id = DAVINCI_CPU_ID_DA850, .name = "da850/omap-l138", }, + { + .variant = 0x1, + .part_no = 0xb7d1, + .manufacturer = 0x017, /* 0x02f >> 1 */ + .cpu_id = DAVINCI_CPU_ID_DA850, + .name = "da850/omap-l138/am18x", + }, }; static struct davinci_timer_instance da850_timer_instance[4] = { -- cgit v1.2.3-18-g5258 From 6619490a7f8c3e38406bfc03c755367fec21372d Mon Sep 17 00:00:00 2001 From: Michael Williamson Date: Tue, 4 Jan 2011 07:50:23 -0500 Subject: davinci: Support various speedgrades for MityDSP-L138 and MityARM-1808 SoMs For the MityDSP-L138/MityARM-1808 SoMs, the speed grade can be determined from the part number string read from the factory configuration block on the on-board I2C PROM. Configure the maximum CPU speed based on this information. This patch was tested using a MityDSP-L138 and MityARM-1808 at various speedgrades. Also, for code coverage, a bogus configuration was tested as well as a configuration having an unknown part number. Signed-off-by: Michael Williamson Tested-by: Michael Williamson Reviewed-by: Sekhar Nori Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-mityomapl138.c | 83 +++++++++++++++++++++++++++--- 1 file changed, 75 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c index 0bb5f0ce4fd..0ea59327dc2 100644 --- a/arch/arm/mach-davinci/board-mityomapl138.c +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -44,38 +44,109 @@ struct factory_config { static struct factory_config factory_config; +struct part_no_info { + const char *part_no; /* part number string of interest */ + int max_freq; /* khz */ +}; + +static struct part_no_info mityomapl138_pn_info[] = { + { + .part_no = "L138-C", + .max_freq = 300000, + }, + { + .part_no = "L138-D", + .max_freq = 375000, + }, + { + .part_no = "L138-F", + .max_freq = 456000, + }, + { + .part_no = "1808-C", + .max_freq = 300000, + }, + { + .part_no = "1808-D", + .max_freq = 375000, + }, + { + .part_no = "1808-F", + .max_freq = 456000, + }, + { + .part_no = "1810-D", + .max_freq = 375000, + }, +}; + +#ifdef CONFIG_CPU_FREQ +static void mityomapl138_cpufreq_init(const char *partnum) +{ + int i, ret; + + for (i = 0; partnum && i < ARRAY_SIZE(mityomapl138_pn_info); i++) { + /* + * the part number has additional characters beyond what is + * stored in the table. This information is not needed for + * determining the speed grade, and would require several + * more table entries. Only check the first N characters + * for a match. + */ + if (!strncmp(partnum, mityomapl138_pn_info[i].part_no, + strlen(mityomapl138_pn_info[i].part_no))) { + da850_max_speed = mityomapl138_pn_info[i].max_freq; + break; + } + } + + ret = da850_register_cpufreq("pll0_sysclk3"); + if (ret) + pr_warning("cpufreq registration failed: %d\n", ret); +} +#else +static void mityomapl138_cpufreq_init(const char *partnum) { } +#endif + static void read_factory_config(struct memory_accessor *a, void *context) { int ret; + const char *partnum = NULL; struct davinci_soc_info *soc_info = &davinci_soc_info; ret = a->read(a, (char *)&factory_config, 0, sizeof(factory_config)); if (ret != sizeof(struct factory_config)) { pr_warning("MityOMAPL138: Read Factory Config Failed: %d\n", ret); - return; + goto bad_config; } if (factory_config.magic != FACTORY_CONFIG_MAGIC) { pr_warning("MityOMAPL138: Factory Config Magic Wrong (%X)\n", factory_config.magic); - return; + goto bad_config; } if (factory_config.version != FACTORY_CONFIG_VERSION) { pr_warning("MityOMAPL138: Factory Config Version Wrong (%X)\n", factory_config.version); - return; + goto bad_config; } pr_info("MityOMAPL138: Found MAC = %pM\n", factory_config.mac); - pr_info("MityOMAPL138: Part Number = %s\n", factory_config.partnum); if (is_valid_ether_addr(factory_config.mac)) memcpy(soc_info->emac_pdata->mac_addr, factory_config.mac, ETH_ALEN); else pr_warning("MityOMAPL138: Invalid MAC found " "in factory config block\n"); + + partnum = factory_config.partnum; + pr_info("MityOMAPL138: Part Number = %s\n", partnum); + +bad_config: + /* default maximum speed is valid for all platforms */ + mityomapl138_cpufreq_init(partnum); } static struct at24_platform_data mityomapl138_fd_chip = { @@ -383,10 +454,6 @@ static void __init mityomapl138_init(void) if (ret) pr_warning("rtc setup failed: %d\n", ret); - ret = da850_register_cpufreq("pll0_sysclk3"); - if (ret) - pr_warning("cpufreq registration failed: %d\n", ret); - ret = da8xx_register_cpuidle(); if (ret) pr_warning("cpuidle registration failed: %d\n", ret); -- cgit v1.2.3-18-g5258 From 8ae7545aae15b55afe24ecebb234484883646410 Mon Sep 17 00:00:00 2001 From: Michael Williamson Date: Tue, 18 Jan 2011 12:21:42 -0500 Subject: davinci: da850: remove unused pinmux array The da850_cpgmac_pins pinmux array is not used. Remove it. Signed-off-by: Michael Williamson Tested-by: Sudhakar Rajashekhara Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/da850.c | 11 ----------- arch/arm/mach-davinci/include/mach/da8xx.h | 1 - 2 files changed, 12 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 703e81f8b24..7031a6ec4cd 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -597,17 +597,6 @@ const short da850_i2c1_pins[] __initdata = { -1 }; -const short da850_cpgmac_pins[] __initdata = { - DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3, - DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER, - DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3, - DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK, - DA850_MDIO_D, DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN, - DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1, DA850_RMII_RXER, - DA850_RMII_MHZ_50_CLK, - -1 -}; - const short da850_mcasp_pins[] __initdata = { DA850_AHCLKX, DA850_ACLKX, DA850_AFSX, DA850_AHCLKR, DA850_ACLKR, DA850_AFSR, DA850_AMUTE, diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index e7f95206652..5f634c8b334 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -128,7 +128,6 @@ extern const short da850_uart1_pins[]; extern const short da850_uart2_pins[]; extern const short da850_i2c0_pins[]; extern const short da850_i2c1_pins[]; -extern const short da850_cpgmac_pins[]; extern const short da850_mcasp_pins[]; extern const short da850_lcdcntl_pins[]; extern const short da850_mmcsd0_pins[]; -- cgit v1.2.3-18-g5258 From 0b642b6a86771f4f82abe6608fc61e050ea03f33 Mon Sep 17 00:00:00 2001 From: Michael Williamson Date: Tue, 18 Jan 2011 12:21:43 -0500 Subject: davinci: da850: remove unused emif pinmux array The da850_emif25_pins pinmux array is not used. Remove it. Signed-off-by: Michael Williamson Tested-by: Sudhakar Rajashekhara Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/da850.c | 16 ---------------- arch/arm/mach-davinci/include/mach/da8xx.h | 1 - 2 files changed, 17 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 7031a6ec4cd..1cf3d7fc470 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -620,22 +620,6 @@ const short da850_mmcsd0_pins[] __initdata = { -1 }; -const short da850_emif25_pins[] __initdata = { - DA850_EMA_BA_1, DA850_EMA_CLK, DA850_EMA_WAIT_1, DA850_NEMA_CS_2, - DA850_NEMA_CS_3, DA850_NEMA_CS_4, DA850_NEMA_WE, DA850_NEMA_OE, - DA850_EMA_D_0, DA850_EMA_D_1, DA850_EMA_D_2, DA850_EMA_D_3, - DA850_EMA_D_4, DA850_EMA_D_5, DA850_EMA_D_6, DA850_EMA_D_7, - DA850_EMA_D_8, DA850_EMA_D_9, DA850_EMA_D_10, DA850_EMA_D_11, - DA850_EMA_D_12, DA850_EMA_D_13, DA850_EMA_D_14, DA850_EMA_D_15, - DA850_EMA_A_0, DA850_EMA_A_1, DA850_EMA_A_2, DA850_EMA_A_3, - DA850_EMA_A_4, DA850_EMA_A_5, DA850_EMA_A_6, DA850_EMA_A_7, - DA850_EMA_A_8, DA850_EMA_A_9, DA850_EMA_A_10, DA850_EMA_A_11, - DA850_EMA_A_12, DA850_EMA_A_13, DA850_EMA_A_14, DA850_EMA_A_15, - DA850_EMA_A_16, DA850_EMA_A_17, DA850_EMA_A_18, DA850_EMA_A_19, - DA850_EMA_A_20, DA850_EMA_A_21, DA850_EMA_A_22, DA850_EMA_A_23, - -1 -}; - /* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */ static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = { [IRQ_DA8XX_COMMTX] = 7, diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index 5f634c8b334..4297f1ecffa 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -131,6 +131,5 @@ extern const short da850_i2c1_pins[]; extern const short da850_mcasp_pins[]; extern const short da850_lcdcntl_pins[]; extern const short da850_mmcsd0_pins[]; -extern const short da850_emif25_pins[]; #endif /* __ASM_ARCH_DAVINCI_DA8XX_H */ -- cgit v1.2.3-18-g5258 From c840fc745f6ec8a3b7062d72de193ab9c397d725 Mon Sep 17 00:00:00 2001 From: Michael Williamson Date: Tue, 18 Jan 2011 12:21:44 -0500 Subject: davinci: da850: move da850_evm specific mcasp pins to board file. The da850_mcasp_pins pinmux array is specific to the da850_evm, and is not generic. Move the array to the board file, make it static initdata, and rename it accordingly. Signed-off-by: Michael Williamson Tested-by: Sudhakar Rajashekhara Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-da850-evm.c | 9 ++++++++- arch/arm/mach-davinci/da850.c | 7 ------- arch/arm/mach-davinci/include/mach/da8xx.h | 1 - 3 files changed, 8 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index b01fb2ab944..c4c0b7562d9 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -664,6 +664,13 @@ static struct snd_platform_data da850_evm_snd_data = { .rxnumevt = 1, }; +static const short da850_evm_mcasp_pins[] __initconst = { + DA850_AHCLKX, DA850_ACLKX, DA850_AFSX, + DA850_AHCLKR, DA850_ACLKR, DA850_AFSR, DA850_AMUTE, + DA850_AXR_11, DA850_AXR_12, + -1 +}; + static int da850_evm_mmc_get_ro(int index) { return gpio_get_value(DA850_MMCSD_WP_PIN); @@ -1106,7 +1113,7 @@ static __init void da850_evm_init(void) __raw_writel(0, IO_ADDRESS(DA8XX_UART1_BASE) + 0x30); __raw_writel(0, IO_ADDRESS(DA8XX_UART0_BASE) + 0x30); - ret = davinci_cfg_reg_list(da850_mcasp_pins); + ret = davinci_cfg_reg_list(da850_evm_mcasp_pins); if (ret) pr_warning("da850_evm_init: mcasp mux setup failed: %d\n", ret); diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 1cf3d7fc470..9cb769c2890 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -597,13 +597,6 @@ const short da850_i2c1_pins[] __initdata = { -1 }; -const short da850_mcasp_pins[] __initdata = { - DA850_AHCLKX, DA850_ACLKX, DA850_AFSX, - DA850_AHCLKR, DA850_ACLKR, DA850_AFSR, DA850_AMUTE, - DA850_AXR_11, DA850_AXR_12, - -1 -}; - const short da850_lcdcntl_pins[] __initdata = { DA850_LCD_D_0, DA850_LCD_D_1, DA850_LCD_D_2, DA850_LCD_D_3, DA850_LCD_D_4, DA850_LCD_D_5, DA850_LCD_D_6, DA850_LCD_D_7, diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index 4297f1ecffa..89668b402e2 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -128,7 +128,6 @@ extern const short da850_uart1_pins[]; extern const short da850_uart2_pins[]; extern const short da850_i2c0_pins[]; extern const short da850_i2c1_pins[]; -extern const short da850_mcasp_pins[]; extern const short da850_lcdcntl_pins[]; extern const short da850_mmcsd0_pins[]; -- cgit v1.2.3-18-g5258 From 5a0d80ea806f89c078dd4b244479080cfe73d2ae Mon Sep 17 00:00:00 2001 From: Michael Williamson Date: Tue, 18 Jan 2011 12:21:45 -0500 Subject: davinci: da850: move da850_evm specific mmcsd pinmux array to board file. The da850_mmcsd0_pins pinmux array contains pins that are specific to the da850 evm board (the write protect and card detect GPIO pins). Move the array to the board file. Signed-off-by: Michael Williamson Tested-by: Sudhakar Rajashekhara Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-da850-evm.c | 9 ++++++++- arch/arm/mach-davinci/da850.c | 7 ------- arch/arm/mach-davinci/include/mach/da8xx.h | 1 - 3 files changed, 8 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index c4c0b7562d9..11f986bec89 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -690,6 +690,13 @@ static struct davinci_mmc_config da850_mmc_config = { .version = MMC_CTLR_VERSION_2, }; +static const short da850_evm_mmcsd0_pins[] __initconst = { + DA850_MMCSD0_DAT_0, DA850_MMCSD0_DAT_1, DA850_MMCSD0_DAT_2, + DA850_MMCSD0_DAT_3, DA850_MMCSD0_CLK, DA850_MMCSD0_CMD, + DA850_GPIO4_0, DA850_GPIO4_1, + -1 +}; + static void da850_panel_power_ctrl(int val) { /* lcd backlight */ @@ -1077,7 +1084,7 @@ static __init void da850_evm_init(void) ret); if (HAS_MMC) { - ret = davinci_cfg_reg_list(da850_mmcsd0_pins); + ret = davinci_cfg_reg_list(da850_evm_mmcsd0_pins); if (ret) pr_warning("da850_evm_init: mmcsd0 mux setup failed:" " %d\n", ret); diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 9cb769c2890..9fd497afd4a 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -606,13 +606,6 @@ const short da850_lcdcntl_pins[] __initdata = { -1 }; -const short da850_mmcsd0_pins[] __initdata = { - DA850_MMCSD0_DAT_0, DA850_MMCSD0_DAT_1, DA850_MMCSD0_DAT_2, - DA850_MMCSD0_DAT_3, DA850_MMCSD0_CLK, DA850_MMCSD0_CMD, - DA850_GPIO4_0, DA850_GPIO4_1, - -1 -}; - /* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */ static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = { [IRQ_DA8XX_COMMTX] = 7, diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index 89668b402e2..18f6c23f6b0 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -129,6 +129,5 @@ extern const short da850_uart2_pins[]; extern const short da850_i2c0_pins[]; extern const short da850_i2c1_pins[]; extern const short da850_lcdcntl_pins[]; -extern const short da850_mmcsd0_pins[]; #endif /* __ASM_ARCH_DAVINCI_DA8XX_H */ -- cgit v1.2.3-18-g5258 From a42f18c96da2220eaad603a7586d43cdd12d9f9f Mon Sep 17 00:00:00 2001 From: Michael Williamson Date: Tue, 18 Jan 2011 12:21:46 -0500 Subject: davinci: da850: remove unused uart pinmux arrays. The da850 uart pinmux arrays are not used. Remove them. Signed-off-by: Michael Williamson Tested-by: Sudhakar Rajashekhara Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/da850.c | 15 --------------- arch/arm/mach-davinci/include/mach/da8xx.h | 3 --- 2 files changed, 18 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 9fd497afd4a..3443d972526 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -572,21 +572,6 @@ static const struct mux_config da850_pins[] = { #endif }; -const short da850_uart0_pins[] __initdata = { - DA850_NUART0_CTS, DA850_NUART0_RTS, DA850_UART0_RXD, DA850_UART0_TXD, - -1 -}; - -const short da850_uart1_pins[] __initdata = { - DA850_UART1_RXD, DA850_UART1_TXD, - -1 -}; - -const short da850_uart2_pins[] __initdata = { - DA850_UART2_RXD, DA850_UART2_TXD, - -1 -}; - const short da850_i2c0_pins[] __initdata = { DA850_I2C0_SDA, DA850_I2C0_SCL, -1 diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index 18f6c23f6b0..cfcb2232e6b 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -123,9 +123,6 @@ extern const short da830_ecap2_pins[]; extern const short da830_eqep0_pins[]; extern const short da830_eqep1_pins[]; -extern const short da850_uart0_pins[]; -extern const short da850_uart1_pins[]; -extern const short da850_uart2_pins[]; extern const short da850_i2c0_pins[]; extern const short da850_i2c1_pins[]; extern const short da850_lcdcntl_pins[]; -- cgit v1.2.3-18-g5258 From 2e3e2a5e4fef586ae9b1cfef42823c0aef1797f4 Mon Sep 17 00:00:00 2001 From: Michael Williamson Date: Tue, 8 Feb 2011 07:59:55 -0500 Subject: davinci: spi: move event queue parameter to platform data For DMA operation, the davinci spi driver needs an event queue number. Currently, this number is passed as a IORESOURCE_DMA. This is not correct, as the event queue is not a DMA channel. Pass the event queue via the platform data structure instead. On dm355 and dm365, move the eventq assignment for spi0 out of resources array and into platform data. Signed-off-by: Michael Williamson Acked-by: Sekhar Nori Acked-by: Grant Likely Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/dm355.c | 5 +---- arch/arm/mach-davinci/dm365.c | 5 +---- arch/arm/mach-davinci/include/mach/spi.h | 15 ++++++++++----- 3 files changed, 12 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index a5f8a80c1f2..76364d1345d 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -403,16 +403,13 @@ static struct resource dm355_spi0_resources[] = { .start = 16, .flags = IORESOURCE_DMA, }, - { - .start = EVENTQ_1, - .flags = IORESOURCE_DMA, - }, }; static struct davinci_spi_platform_data dm355_spi0_pdata = { .version = SPI_VERSION_1, .num_chipselect = 2, .cshold_bug = true, + .dma_event_q = EVENTQ_1, }; static struct platform_device dm355_spi0_device = { .name = "spi_davinci", diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 02d2cc380df..4604e72d7d9 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -625,6 +625,7 @@ static u64 dm365_spi0_dma_mask = DMA_BIT_MASK(32); static struct davinci_spi_platform_data dm365_spi0_pdata = { .version = SPI_VERSION_1, .num_chipselect = 2, + .dma_event_q = EVENTQ_3, }; static struct resource dm365_spi0_resources[] = { @@ -645,10 +646,6 @@ static struct resource dm365_spi0_resources[] = { .start = 16, .flags = IORESOURCE_DMA, }, - { - .start = EVENTQ_3, - .flags = IORESOURCE_DMA, - }, }; static struct platform_device dm365_spi0_device = { diff --git a/arch/arm/mach-davinci/include/mach/spi.h b/arch/arm/mach-davinci/include/mach/spi.h index 38f4da5ca13..7af305b3786 100644 --- a/arch/arm/mach-davinci/include/mach/spi.h +++ b/arch/arm/mach-davinci/include/mach/spi.h @@ -19,6 +19,8 @@ #ifndef __ARCH_ARM_DAVINCI_SPI_H #define __ARCH_ARM_DAVINCI_SPI_H +#include + #define SPI_INTERN_CS 0xFF enum { @@ -39,13 +41,16 @@ enum { * to populate if all chip-selects are internal. * @cshold_bug: set this to true if the SPI controller on your chip requires * a write to CSHOLD bit in between transfers (like in DM355). + * @dma_event_q: DMA event queue to use if SPI_IO_TYPE_DMA is used for any + * device on the bus. */ struct davinci_spi_platform_data { - u8 version; - u8 num_chipselect; - u8 intr_line; - u8 *chip_sel; - bool cshold_bug; + u8 version; + u8 num_chipselect; + u8 intr_line; + u8 *chip_sel; + bool cshold_bug; + enum dma_event_q dma_event_q; }; /** -- cgit v1.2.3-18-g5258 From 3113307a37c731a8caa608d086f8506905e08b30 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 9 Feb 2011 18:33:23 +0000 Subject: DaVinci: fix compilation warnings in Commit 6d803ba736abb5e122dede70a4720e4843dd6df4 (ARM: 6483/1: arm & sh: factorised duplicated clkdev.c) caused the following warnings: In file included from /home/headless/src/kernel.org/linux-davinci/arch/arm/ include/asm/clkdev.h:17, from include/linux/clkdev.h:15, from arch/arm/mach-davinci/clock.h:71, from arch/arm/mach-davinci/common.c:22: arch/arm/mach-davinci/include/mach/clkdev.h:4: warning: `struct clk' declared inside parameter list arch/arm/mach-davinci/include/mach/clkdev.h:4: warning: its scope is only this definition or declaration, which is probably not what you want arch/arm/mach-davinci/include/mach/clkdev.h:9: warning: `struct clk' declared inside parameter list Signed-off-by: Sergei Shtylyov Acked-by: Sekhar Nori Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/include/mach/clkdev.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-davinci/include/mach/clkdev.h b/arch/arm/mach-davinci/include/mach/clkdev.h index 730c49d1ebd..14a50488718 100644 --- a/arch/arm/mach-davinci/include/mach/clkdev.h +++ b/arch/arm/mach-davinci/include/mach/clkdev.h @@ -1,6 +1,8 @@ #ifndef __MACH_CLKDEV_H #define __MACH_CLKDEV_H +struct clk; + static inline int __clk_get(struct clk *clk) { return 1; -- cgit v1.2.3-18-g5258 From 079db590f954baa03804a6fc66b201e1347dc1c1 Mon Sep 17 00:00:00 2001 From: Axel Lin <[axel.lin@gmail.com]> Date: Mon, 28 Feb 2011 15:51:33 +0530 Subject: davinci: cpufreq: fix section mismatch warning Fix below section mismatch warning: WARNING: vmlinux.o(.data+0x673c): Section mismatch in reference from the variable davinci_driver to the function .init.text:davinci_cpu_init() The variable davinci_driver references the function __init davinci_cpu_init() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Signed-off-by: Axel Lin Acked-by: Sekhar Nori Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/cpufreq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c index 343de73161f..4a68c2b1ec1 100644 --- a/arch/arm/mach-davinci/cpufreq.c +++ b/arch/arm/mach-davinci/cpufreq.c @@ -132,7 +132,7 @@ out: return ret; } -static int __init davinci_cpu_init(struct cpufreq_policy *policy) +static int davinci_cpu_init(struct cpufreq_policy *policy) { int result = 0; struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data; -- cgit v1.2.3-18-g5258 From d6b5d01b3f7c10edb50b9092d8dcac9cab680ea3 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Fri, 25 Feb 2011 17:38:25 -0700 Subject: OMAP2+: sdrc: fix compile break on OMAP4-only config on current omap-for-linus On non-OMAP2 and non-OMAP3 kernel configs, turn omap2_sdrc_init() into a no-op. Otherwise, compilation breaks on an OMAP4-only config with the current omap-for-linus branch: arch/arm/mach-omap2/built-in.o: In function `omap2_init_common_devices': ../mach-omap2/io.c:421: undefined reference to `omap2_sdrc_init' Thanks to Sergei Shtylyov for suggesting the use of a empty static inline function rather than a macro. Signed-off-by: Paul Walmsley Cc: Tony Lindgren Cc: Sergei Shtylyov [tony@atomide.com: updated not to use __init for inline omap2_sdrc_init] Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/sdrc.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/include/plat/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h index efd87c8dda6..925b12b500d 100644 --- a/arch/arm/plat-omap/include/plat/sdrc.h +++ b/arch/arm/plat-omap/include/plat/sdrc.h @@ -124,8 +124,14 @@ struct omap_sdrc_params { u32 mr; }; -void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) +void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, struct omap_sdrc_params *sdrc_cs1); +#else +static inline void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, + struct omap_sdrc_params *sdrc_cs1) {}; +#endif + int omap2_sdrc_get_params(unsigned long r, struct omap_sdrc_params **sdrc_cs0, struct omap_sdrc_params **sdrc_cs1); -- cgit v1.2.3-18-g5258 From aca6ad073ea820776bf5bdb87cf82eace35042c8 Mon Sep 17 00:00:00 2001 From: Eyal Reizer Date: Sun, 27 Feb 2011 10:45:18 +0000 Subject: omap: omap3evm: add support for the WL12xx WLAN module to the omap3evm This patch is again current omap-for-linus branch Adds platform initialization for working with the WLAN module attached to the omap3evm. The patch includes MMC2 initialization, SDIO and control pins muxing and platform device registration. Signed-off-by: Eyal Reizer Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-omap3evm.c | 32 ++++++++++++++++++++++---------- 1 file changed, 22 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 5364147892c..7341f966bf1 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -411,7 +411,7 @@ static struct omap2_hsmmc_info mmc[] = { #ifdef CONFIG_WL12XX_PLATFORM_DATA { .name = "wl1271", - .mmc = 2, + .mmc = 2, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD, .gpio_wp = -EINVAL, .gpio_cd = -EINVAL, @@ -603,10 +603,8 @@ static struct regulator_init_data omap3evm_vio = { #define OMAP3EVM_WLAN_PMENA_GPIO (150) #define OMAP3EVM_WLAN_IRQ_GPIO (149) -static struct regulator_consumer_supply omap3evm_vmmc2_supply = { - .supply = "vmmc", - .dev_name = "mmci-omap-hs.1", -}; +static struct regulator_consumer_supply omap3evm_vmmc2_supply = + REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1"); /* VMMC2 for driving the WL12xx module */ static struct regulator_init_data omap3evm_vmmc2 = { @@ -627,7 +625,7 @@ static struct fixed_voltage_config omap3evm_vwlan = { .init_data = &omap3evm_vmmc2, }; -static struct platform_device omap3evm_vwlan_device = { +static struct platform_device omap3evm_wlan_regulator = { .name = "reg-fixed-voltage", .id = 1, .dev = { @@ -637,8 +635,7 @@ static struct platform_device omap3evm_vwlan_device = { struct wl12xx_platform_data omap3evm_wlan_data __initdata = { .irq = OMAP_GPIO_IRQ(OMAP3EVM_WLAN_IRQ_GPIO), - /* ref clock is 38.4 MHz */ - .board_ref_clock = 2, + .board_ref_clock = WL12XX_REFCLOCK_38, /* 38.4 MHz */ }; #endif @@ -765,7 +762,7 @@ static struct omap_board_mux omap35x_board_mux[] __initdata = { OMAP_PIN_OFF_NONE), #ifdef CONFIG_WL12XX_PLATFORM_DATA /* WLAN IRQ - GPIO 149 */ - OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), + OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), /* WLAN POWER ENABLE - GPIO 150 */ OMAP3_MUX(UART1_CTS, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), @@ -801,6 +798,21 @@ static struct omap_board_mux omap36x_board_mux[] __initdata = { OMAP3_MUX(SYS_BOOT4, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), OMAP3_MUX(SYS_BOOT5, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), OMAP3_MUX(SYS_BOOT6, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), +#ifdef CONFIG_WL12XX_PLATFORM_DATA + /* WLAN IRQ - GPIO 149 */ + OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), + + /* WLAN POWER ENABLE - GPIO 150 */ + OMAP3_MUX(UART1_CTS, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), + + /* MMC2 SDIO pin muxes for WL12xx */ + OMAP3_MUX(SDMMC2_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), + OMAP3_MUX(SDMMC2_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), + OMAP3_MUX(SDMMC2_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), + OMAP3_MUX(SDMMC2_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), + OMAP3_MUX(SDMMC2_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), + OMAP3_MUX(SDMMC2_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), +#endif { .reg_offset = OMAP_MUX_TERMINATOR }, }; @@ -871,7 +883,7 @@ static void __init omap3_evm_init(void) /* WL12xx WLAN Init */ if (wl12xx_set_platform_data(&omap3evm_wlan_data)) pr_err("error setting wl12xx data\n"); - platform_device_register(&omap3evm_vwlan_device); + platform_device_register(&omap3evm_wlan_regulator); #endif } -- cgit v1.2.3-18-g5258 From 8c59ef38119102ccd2a8db6f19a8864a7c8d4e73 Mon Sep 17 00:00:00 2001 From: Hema HK Date: Mon, 28 Feb 2011 14:19:36 +0530 Subject: usb: otg: OMAP4430: Save/restore the context Add the context save/restore for the control module register used for OMAP4430 musb with UTMI embedded PHY interface. Signed-off-by: Hema HK Cc: Tony Lindgren Cc: Paul Walmsley Signed-off-by: Felipe Balbi --- arch/arm/mach-omap2/omap_phy_internal.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index 3ce675899fc..ebe33df708b 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -43,6 +43,7 @@ static struct clk *phyclk, *clk48m, *clk32k; static void __iomem *ctrl_base; +static int usbotghs_control; int omap4430_phy_init(struct device *dev) { @@ -129,6 +130,9 @@ int omap4430_phy_suspend(struct device *dev, int suspend) omap4430_phy_set_clk(dev, 0); /* Power down the phy */ __raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF); + + /* save the context */ + usbotghs_control = __raw_readl(ctrl_base + USBOTGHS_CONTROL); } else { /* Enable the internel phy clcoks */ omap4430_phy_set_clk(dev, 1); @@ -137,6 +141,9 @@ int omap4430_phy_suspend(struct device *dev, int suspend) __raw_writel(~PHY_PD, ctrl_base + CONTROL_DEV_CONF); mdelay(200); } + + /* restore the context */ + __raw_writel(usbotghs_control, ctrl_base + USBOTGHS_CONTROL); } return 0; -- cgit v1.2.3-18-g5258 From fb91cde49c327ff957c55d91805bc6abda59b311 Mon Sep 17 00:00:00 2001 From: Hema HK Date: Mon, 28 Feb 2011 14:19:35 +0530 Subject: usb: musb: OMAP4430: Power down the PHY during board init Powerdown the internal PHY during board init for OMAP44xx. So that when musb is disabled core transition to retention/off is not blocked. Signed-off-by: Hema HK Cc: Tony Lindgren Cc: Paul Walmsley Signed-off-by: Felipe Balbi --- arch/arm/mach-omap2/usb-musb.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index 5298949d4b1..241fc94b411 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -214,6 +214,10 @@ void __init usb_musb_init(struct omap_musb_board_data *board_data) if (platform_device_register(&musb_device) < 0) printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n"); + + if (cpu_is_omap44xx()) + omap4430_phy_init(dev); + } #else -- cgit v1.2.3-18-g5258 From bfc39061d3dbf812e6a78f9529a548e5f0050c64 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Tue, 1 Mar 2011 11:14:55 +0000 Subject: um, x86-64: Fix UML build after adding CFI annotations to lib/rwsem_64.S arch/um/Kconfig.x86 has X86_32 but not X86_64 - that's resulting in asm/dwarf2.h producing the 32-bit (pushl_cfi & Co) macros instead of the 64-bit ones. Signed-off-by: Jan Beulich Cc: Jeff Dike LKML-Reference: <4D6CE3400200007800034498@vpn.id2.novell.com> Signed-off-by: Ingo Molnar --- arch/um/Kconfig.x86 | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/um/Kconfig.x86 b/arch/um/Kconfig.x86 index 5ee328099c6..62f21156aaa 100644 --- a/arch/um/Kconfig.x86 +++ b/arch/um/Kconfig.x86 @@ -19,6 +19,9 @@ config X86_32 def_bool !64BIT select HAVE_AOUT +config X86_64 + def_bool 64BIT + config RWSEM_XCHGADD_ALGORITHM def_bool X86_XADD -- cgit v1.2.3-18-g5258 From d4abe93386890061f109f2f2a46761ac5129bed6 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Wed, 23 Feb 2011 14:51:58 +0100 Subject: arm: mach-mx3: use IMX_GPIO_NR instead of hard-coded values The latter are error-prone because the bank number is one less than one would read in the documentation. Signed-off-by: Wolfram Sang Acked-by: Eric Benard Cc: Sascha Hauer Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c | 4 ++-- arch/arm/mach-mx3/mach-cpuimx35.c | 2 +- arch/arm/mach-mx3/mach-pcm043.c | 6 +++--- 3 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c index 14a5ffc939a..80761474c0f 100644 --- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c +++ b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c @@ -165,8 +165,8 @@ static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = { MX35_PAD_SD1_DATA3__ESDHC1_DAT3, }; -#define GPIO_LED1 (2 * 32 + 29) -#define GPIO_SWITCH1 (2 * 32 + 25) +#define GPIO_LED1 IMX_GPIO_NR(3, 29) +#define GPIO_SWITCH1 IMX_GPIO_NR(3, 25) #define GPIO_LCDPWR (4) static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd, diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c index 6db0520e879..a42f1a98f1a 100644 --- a/arch/arm/mach-mx3/mach-cpuimx35.c +++ b/arch/arm/mach-mx3/mach-cpuimx35.c @@ -60,7 +60,7 @@ static struct tsc2007_platform_data tsc2007_info = { .x_plate_ohms = 180, }; -#define TSC2007_IRQGPIO (2 * 32 + 2) +#define TSC2007_IRQGPIO IMX_GPIO_NR(3, 2) static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = { { I2C_BOARD_INFO("pcf8563", 0x51), diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c index 6c662c73aaa..262af17db44 100644 --- a/arch/arm/mach-mx3/mach-pcm043.c +++ b/arch/arm/mach-mx3/mach-pcm043.c @@ -219,9 +219,9 @@ static iomux_v3_cfg_t pcm043_pads[] = { MX35_PAD_SD1_DATA3__ESDHC1_DAT3, }; -#define AC97_GPIO_TXFS (1 * 32 + 31) -#define AC97_GPIO_TXD (1 * 32 + 28) -#define AC97_GPIO_RESET (1 * 32 + 0) +#define AC97_GPIO_TXFS IMX_GPIO_NR(2, 31) +#define AC97_GPIO_TXD IMX_GPIO_NR(2, 28) +#define AC97_GPIO_RESET IMX_GPIO_NR(2, 0) static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97) { -- cgit v1.2.3-18-g5258 From b137214692effb1bc2221de8ccb11c09fb9df6f2 Mon Sep 17 00:00:00 2001 From: Eric Bénard Date: Fri, 25 Feb 2011 14:38:27 +0100 Subject: cpuimx51sd: add cpufreq support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Eric Bénard Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/board-cpuimx51sd.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c index f38b341ac40..6f5bcc1b38d 100644 --- a/arch/arm/mach-mx5/board-cpuimx51sd.c +++ b/arch/arm/mach-mx5/board-cpuimx51sd.c @@ -42,6 +42,7 @@ #include "devices-imx51.h" #include "devices.h" +#include "cpu_op-mx51.h" #define USBH1_RST IMX_GPIO_NR(2, 28) #define ETH_RST IMX_GPIO_NR(2, 31) @@ -274,6 +275,10 @@ static void __init eukrea_cpuimx51sd_init(void) mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads, ARRAY_SIZE(eukrea_cpuimx51sd_pads)); +#if defined(CONFIG_CPU_FREQ_IMX) + get_cpu_op = mx51_get_cpu_op; +#endif + imx51_add_imx_uart(0, &uart_pdata); imx51_add_mxc_nand(&eukrea_cpuimx51sd_nand_board_info); -- cgit v1.2.3-18-g5258 From 33d3487f557ea6787b1a8166b1ed123bb2136619 Mon Sep 17 00:00:00 2001 From: Eric Bénard Date: Fri, 25 Feb 2011 15:04:14 +0100 Subject: cpuimx51sd: fix tsc2007 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit - wrong MUX was set before for IRQ - get_pendown_state is no more needed Signed-off-by: Eric Bénard Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/board-cpuimx51sd.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c index 6f5bcc1b38d..820146e4caa 100644 --- a/arch/arm/mach-mx5/board-cpuimx51sd.c +++ b/arch/arm/mach-mx5/board-cpuimx51sd.c @@ -110,7 +110,7 @@ static iomux_v3_cfg_t eukrea_cpuimx51sd_pads[] = { /* Touchscreen */ /* IRQ */ - _MX51_PAD_CSI1_D8__GPIO3_12 | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP | + _MX51_PAD_GPIO_NAND__GPIO_NAND | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP | PAD_CTL_PKE | PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS), }; @@ -119,15 +119,9 @@ static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; -static int ts_get_pendown_state(void) -{ - return gpio_get_value(TSC2007_IRQGPIO) ? 0 : 1; -} - static struct tsc2007_platform_data tsc2007_info = { .model = 2007, .x_plate_ohms = 180, - .get_pendown_state = ts_get_pendown_state, }; static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = { -- cgit v1.2.3-18-g5258 From 8c3f2d7a2df5b3ad020571cacb1824f8df4768fd Mon Sep 17 00:00:00 2001 From: Eric Bénard Date: Fri, 25 Feb 2011 14:38:29 +0100 Subject: cpuimx51sd: mcp2515 supports up to 10MHz SPI clock MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Eric Bénard Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/board-cpuimx51sd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c index 820146e4caa..29b180823bf 100644 --- a/arch/arm/mach-mx5/board-cpuimx51sd.c +++ b/arch/arm/mach-mx5/board-cpuimx51sd.c @@ -242,7 +242,7 @@ static struct mcp251x_platform_data mcp251x_info = { static struct spi_board_info cpuimx51sd_spi_device[] = { { .modalias = "mcp2515", - .max_speed_hz = 6500000, + .max_speed_hz = 10000000, .bus_num = 0, .mode = SPI_MODE_0, .chip_select = 0, -- cgit v1.2.3-18-g5258 From 84082d665dc62e632e21213fda8b22c0b8c25b81 Mon Sep 17 00:00:00 2001 From: Lothar Waßmann Date: Wed, 15 Dec 2010 22:11:31 +0100 Subject: ARM: mxs: free dma_mask in error path MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes a small memory leak that was only hit in very unlikely error paths. Signed-off-by: Lothar Waßmann Signed-off-by: Uwe Kleine-König --- arch/arm/mach-mxs/devices.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-mxs/devices.c b/arch/arm/mach-mxs/devices.c index c20d54740b0..cfdb6b28470 100644 --- a/arch/arm/mach-mxs/devices.c +++ b/arch/arm/mach-mxs/devices.c @@ -66,6 +66,8 @@ struct platform_device *__init mxs_add_platform_device_dmamask( ret = platform_device_add(pdev); if (ret) { err: + if (dmamask) + kfree(pdev->dev.dma_mask); platform_device_put(pdev); return ERR_PTR(ret); } -- cgit v1.2.3-18-g5258 From c762b293d4a12fb726cec62cfe3e64f66cf3103f Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Fri, 18 Feb 2011 21:59:25 +0100 Subject: ARM: mxc: free dma_mask in error path MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes a small memory leak that was only hit in very unlikely error paths Signed-off-by: Uwe Kleine-König --- arch/arm/plat-mxc/devices.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/plat-mxc/devices.c index e9bcefe79a4..eee1b6096a0 100644 --- a/arch/arm/plat-mxc/devices.c +++ b/arch/arm/plat-mxc/devices.c @@ -81,6 +81,8 @@ struct platform_device *__init imx_add_platform_device_dmamask( ret = platform_device_add(pdev); if (ret) { err: + if (dmamask) + kfree(pdev->dev.dma_mask); platform_device_put(pdev); return ERR_PTR(ret); } -- cgit v1.2.3-18-g5258 From f4b5d2b0d1df863eab004e42b4492fce6ccc52b2 Mon Sep 17 00:00:00 2001 From: Lothar Waßmann Date: Wed, 15 Dec 2010 22:20:13 +0100 Subject: ARM: mxs: add a dma mask to fec devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is not strictly necessary but the right thing to do. Signed-off-by: Lothar Waßmann Signed-off-by: Uwe Kleine-König --- arch/arm/mach-mxs/devices/platform-fec.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mxs/devices/platform-fec.c b/arch/arm/mach-mxs/devices/platform-fec.c index c42dff72b46..9859cf28333 100644 --- a/arch/arm/mach-mxs/devices/platform-fec.c +++ b/arch/arm/mach-mxs/devices/platform-fec.c @@ -45,6 +45,7 @@ struct platform_device *__init mxs_add_fec( }, }; - return mxs_add_platform_device("imx28-fec", data->id, - res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); + return mxs_add_platform_device_dmamask("imx28-fec", data->id, + res, ARRAY_SIZE(res), pdata, sizeof(*pdata), + DMA_BIT_MASK(32)); } -- cgit v1.2.3-18-g5258 From 78159566b7ec120a1020cfc9469ac526bdd05387 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Wed, 19 Jan 2011 11:37:10 +0100 Subject: ARM: mxc: add a dma mask to fec devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is not strictly necessary but the right thing to do. Signed-off-by: Uwe Kleine-König --- arch/arm/plat-mxc/devices/platform-fec.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-mxc/devices/platform-fec.c b/arch/arm/plat-mxc/devices/platform-fec.c index 4f529964224..6561c9df5f0 100644 --- a/arch/arm/plat-mxc/devices/platform-fec.c +++ b/arch/arm/plat-mxc/devices/platform-fec.c @@ -62,7 +62,7 @@ struct platform_device *__init imx_add_fec( }, }; - return imx_add_platform_device("fec", 0 /* -1? */, + return imx_add_platform_device_dmamask("fec", 0, res, ARRAY_SIZE(res), - pdata, sizeof(*pdata)); + pdata, sizeof(*pdata), DMA_BIT_MASK(32)); } -- cgit v1.2.3-18-g5258 From 2301dfa7be2cb3e6bdd07cc1cb349b5853c4d5ee Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 25 Jan 2011 11:58:15 +0100 Subject: ARM: mxs: Add pwm clocks and device registration MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Sascha Hauer Signed-off-by: Uwe Kleine-König --- arch/arm/mach-mxs/Kconfig | 2 ++ arch/arm/mach-mxs/clock-mx23.c | 6 +++++- arch/arm/mach-mxs/clock-mx28.c | 9 ++++++++- arch/arm/mach-mxs/devices-mx23.h | 2 ++ arch/arm/mach-mxs/devices-mx28.h | 2 ++ arch/arm/mach-mxs/devices/Kconfig | 3 +++ arch/arm/mach-mxs/devices/Makefile | 1 + arch/arm/mach-mxs/devices/platform-mxs-pwm.c | 22 ++++++++++++++++++++++ arch/arm/mach-mxs/include/mach/devices-common.h | 4 ++++ 9 files changed, 49 insertions(+), 2 deletions(-) create mode 100644 arch/arm/mach-mxs/devices/platform-mxs-pwm.c (limited to 'arch') diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index 55bf075add9..836cc81a63a 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -8,10 +8,12 @@ config MXS_OCOTP config SOC_IMX23 bool select CPU_ARM926T + select HAVE_PWM config SOC_IMX28 bool select CPU_ARM926T + select HAVE_PWM comment "MXS platforms:" diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c index 7c5dace92b9..38ee1b17a27 100644 --- a/arch/arm/mach-mxs/clock-mx23.c +++ b/arch/arm/mach-mxs/clock-mx23.c @@ -447,7 +447,11 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "hclk", hbus_clk) _REGISTER_CLOCK(NULL, "usb", usb_clk) _REGISTER_CLOCK(NULL, "audio", audio_clk) - _REGISTER_CLOCK(NULL, "pwm", pwm_clk) + _REGISTER_CLOCK("mxs-pwm.0", NULL, pwm_clk) + _REGISTER_CLOCK("mxs-pwm.1", NULL, pwm_clk) + _REGISTER_CLOCK("mxs-pwm.2", NULL, pwm_clk) + _REGISTER_CLOCK("mxs-pwm.3", NULL, pwm_clk) + _REGISTER_CLOCK("mxs-pwm.4", NULL, pwm_clk) }; static int clk_misc_init(void) diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index febd787f054..40726c70328 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -622,7 +622,14 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("flexcan.1", NULL, can1_clk) _REGISTER_CLOCK(NULL, "usb0", usb0_clk) _REGISTER_CLOCK(NULL, "usb1", usb1_clk) - _REGISTER_CLOCK(NULL, "pwm", pwm_clk) + _REGISTER_CLOCK("mxs-pwm.0", NULL, pwm_clk) + _REGISTER_CLOCK("mxs-pwm.1", NULL, pwm_clk) + _REGISTER_CLOCK("mxs-pwm.2", NULL, pwm_clk) + _REGISTER_CLOCK("mxs-pwm.3", NULL, pwm_clk) + _REGISTER_CLOCK("mxs-pwm.4", NULL, pwm_clk) + _REGISTER_CLOCK("mxs-pwm.5", NULL, pwm_clk) + _REGISTER_CLOCK("mxs-pwm.6", NULL, pwm_clk) + _REGISTER_CLOCK("mxs-pwm.7", NULL, pwm_clk) _REGISTER_CLOCK(NULL, "lradc", lradc_clk) _REGISTER_CLOCK(NULL, "spdif", spdif_clk) }; diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h index c4d4773d3e8..7fb27b12bea 100644 --- a/arch/arm/mach-mxs/devices-mx23.h +++ b/arch/arm/mach-mxs/devices-mx23.h @@ -19,3 +19,5 @@ extern const struct mxs_auart_data mx23_auart_data[] __initconst; #define mx23_add_auart(id) mxs_add_auart(&mx23_auart_data[id]) #define mx23_add_auart0() mx23_add_auart(0) #define mx23_add_auart1() mx23_add_auart(1) + +#define mx23_add_mxs_pwm(id) mxs_add_mxs_pwm(MX23_PWM_BASE_ADDR, id) diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h index 3b18304c565..69d19ea19d4 100644 --- a/arch/arm/mach-mxs/devices-mx28.h +++ b/arch/arm/mach-mxs/devices-mx28.h @@ -32,3 +32,5 @@ extern const struct mxs_flexcan_data mx28_flexcan_data[] __initconst; mxs_add_flexcan(&mx28_flexcan_data[id], pdata) #define mx28_add_flexcan0(pdata) mx28_add_flexcan(0, pdata) #define mx28_add_flexcan1(pdata) mx28_add_flexcan(1, pdata) + +#define mx28_add_mxs_pwm(id) mxs_add_mxs_pwm(MX28_PWM_BASE_ADDR, id) diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig index 6c65b6716cf..3aeec246e74 100644 --- a/arch/arm/mach-mxs/devices/Kconfig +++ b/arch/arm/mach-mxs/devices/Kconfig @@ -11,3 +11,6 @@ config MXS_HAVE_PLATFORM_FEC config MXS_HAVE_PLATFORM_FLEXCAN select HAVE_CAN_FLEXCAN if CAN bool + +config MXS_HAVE_PLATFORM_MXS_PWM + bool diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile index a8dc8d5f6e1..978310fcafd 100644 --- a/arch/arm/mach-mxs/devices/Makefile +++ b/arch/arm/mach-mxs/devices/Makefile @@ -2,3 +2,4 @@ obj-$(CONFIG_MXS_HAVE_AMBA_DUART) += amba-duart.o obj-$(CONFIG_MXS_HAVE_PLATFORM_AUART) += platform-auart.o obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o obj-$(CONFIG_MXS_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o +obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o diff --git a/arch/arm/mach-mxs/devices/platform-mxs-pwm.c b/arch/arm/mach-mxs/devices/platform-mxs-pwm.c new file mode 100644 index 00000000000..680f5a90293 --- /dev/null +++ b/arch/arm/mach-mxs/devices/platform-mxs-pwm.c @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2010 Pengutronix + * Sascha Hauer + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include +#include + +struct platform_device *__init mxs_add_mxs_pwm(resource_size_t iobase, int id) +{ + struct resource res = { + .flags = IORESOURCE_MEM, + }; + + res.start = iobase + 0x10 + 0x20 * id; + res.end = res.start + 0x1f; + + return mxs_add_platform_device("mxs-pwm", id, &res, 1, NULL, 0); +} diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h index e7aefb467ab..d460d304555 100644 --- a/arch/arm/mach-mxs/include/mach/devices-common.h +++ b/arch/arm/mach-mxs/include/mach/devices-common.h @@ -63,3 +63,7 @@ struct mxs_flexcan_data { struct platform_device *__init mxs_add_flexcan( const struct mxs_flexcan_data *data, const struct flexcan_platform_data *pdata); + +/* pwm */ +struct platform_device *__init mxs_add_mxs_pwm( + resource_size_t iobase, int id); -- cgit v1.2.3-18-g5258 From 19f52522c426b50e934d5fbd0bf759058f03cc60 Mon Sep 17 00:00:00 2001 From: "Justin P. Mattock" Date: Thu, 24 Feb 2011 22:09:35 -0800 Subject: arch/arm/Kconfig: remove one to many l's in the word. The patch below removes an extra "l" in the word. Signed-off-by: Justin P. Mattock Acked-by: Tony Lindgren Signed-off-by: Jiri Kosina --- arch/arm/plat-omap/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index b6333ae3f92..cd5f993612f 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -54,7 +54,7 @@ config OMAP_SMARTREFLEX user must write 1 to /debug/voltage/vdd_/smartreflex/autocomp, where X is mpu or core for OMAP3. - Optionallly autocompensation can be enabled in the kernel + Optionally autocompensation can be enabled in the kernel by default during system init via the enable_on_init flag which an be passed as platform data to the smartreflex driver. -- cgit v1.2.3-18-g5258 From a9031e5f0b82225ea676d729d68beb6c69799a67 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 1 Mar 2011 20:08:13 +0530 Subject: arm: omap: usb: host: add names to resources add names to EHCI and OHCI resources. That will help us identify the resource correctly when moving to a setup where OHCI and EHCI play well together. Signed-off-by: Felipe Balbi --- arch/arm/mach-omap2/usb-ehci.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c index 25eeadabc39..2c74fa17118 100644 --- a/arch/arm/mach-omap2/usb-ehci.c +++ b/arch/arm/mach-omap2/usb-ehci.c @@ -350,6 +350,11 @@ void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata) setup_4430ehci_io_mux(pdata->port_mode); } + ehci_resources[0].name = "ehci"; + ehci_resources[1].name = "uhh"; + ehci_resources[2].name = "tll"; + ehci_resources[3].name = "irq"; + if (platform_device_register(&ehci_device) < 0) { printk(KERN_ERR "Unable to register HS-USB (EHCI) device\n"); return; @@ -369,21 +374,25 @@ void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata) static struct resource ohci_resources[] = { { + .name = "ohci", .start = OMAP34XX_OHCI_BASE, .end = OMAP34XX_OHCI_BASE + SZ_1K - 1, .flags = IORESOURCE_MEM, }, { + .name = "uhh", .start = OMAP34XX_UHH_CONFIG_BASE, .end = OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1, .flags = IORESOURCE_MEM, }, { + .name = "tll", .start = OMAP34XX_USBTLL_BASE, .end = OMAP34XX_USBTLL_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, { /* general IRQ */ + .name = "irq", .start = INT_34XX_OHCI_IRQ, .flags = IORESOURCE_IRQ, } -- cgit v1.2.3-18-g5258 From a8480ea0bedbf049423a4caa9b09d371614c07dc Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 1 Mar 2011 20:08:15 +0530 Subject: arm: omap2: usb: rename usb-ehci.c to usb-host.c We already have both EHCI and OHCI there, so let's rename to be sure everybody will understand the entire USB HOST functionality is setup on this file. Signed-off-by: Felipe Balbi --- arch/arm/mach-omap2/Makefile | 2 +- arch/arm/mach-omap2/usb-ehci.c | 531 ----------------------------------------- arch/arm/mach-omap2/usb-host.c | 531 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 532 insertions(+), 532 deletions(-) delete mode 100644 arch/arm/mach-omap2/usb-ehci.c create mode 100644 arch/arm/mach-omap2/usb-host.c (limited to 'arch') diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 1c0c2b02d87..64dc4176407 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -229,7 +229,7 @@ usbfs-$(CONFIG_ARCH_OMAP_OTG) := usb-fs.o obj-y += $(usbfs-m) $(usbfs-y) obj-y += usb-musb.o obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o -obj-y += usb-ehci.o +obj-y += usb-host.o onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o obj-y += $(onenand-m) $(onenand-y) diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c deleted file mode 100644 index 2c74fa17118..00000000000 --- a/arch/arm/mach-omap2/usb-ehci.c +++ /dev/null @@ -1,531 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/usb-ehci.c - * - * This file will contain the board specific details for the - * Synopsys EHCI host controller on OMAP3430 - * - * Copyright (C) 2007 Texas Instruments - * Author: Vikram Pandita - * - * Generalization by: - * Felipe Balbi - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include - -#include - -#include -#include -#include - -#include "mux.h" - -#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE) - -static struct resource ehci_resources[] = { - { - .flags = IORESOURCE_MEM, - }, - { - .flags = IORESOURCE_MEM, - }, - { - .flags = IORESOURCE_MEM, - }, - { /* general IRQ */ - .flags = IORESOURCE_IRQ, - } -}; - -static u64 ehci_dmamask = ~(u32)0; -static struct platform_device ehci_device = { - .name = "ehci-omap", - .id = 0, - .dev = { - .dma_mask = &ehci_dmamask, - .coherent_dma_mask = 0xffffffff, - .platform_data = NULL, - }, - .num_resources = ARRAY_SIZE(ehci_resources), - .resource = ehci_resources, -}; - -/* MUX settings for EHCI pins */ -/* - * setup_ehci_io_mux - initialize IO pad mux for USBHOST - */ -static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) -{ - switch (port_mode[0]) { - case EHCI_HCD_OMAP_MODE_PHY: - omap_mux_init_signal("hsusb1_stp", OMAP_PIN_OUTPUT); - omap_mux_init_signal("hsusb1_clk", OMAP_PIN_OUTPUT); - omap_mux_init_signal("hsusb1_dir", OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_nxt", OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_data0", OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_data1", OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_data2", OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_data3", OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_data4", OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_data5", OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_data6", OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_data7", OMAP_PIN_INPUT_PULLDOWN); - break; - case EHCI_HCD_OMAP_MODE_TLL: - omap_mux_init_signal("hsusb1_tll_stp", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("hsusb1_tll_clk", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_tll_dir", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_tll_nxt", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_tll_data0", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_tll_data1", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_tll_data2", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_tll_data3", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_tll_data4", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_tll_data5", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_tll_data6", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb1_tll_data7", - OMAP_PIN_INPUT_PULLDOWN); - break; - case EHCI_HCD_OMAP_MODE_UNKNOWN: - /* FALLTHROUGH */ - default: - break; - } - - switch (port_mode[1]) { - case EHCI_HCD_OMAP_MODE_PHY: - omap_mux_init_signal("hsusb2_stp", OMAP_PIN_OUTPUT); - omap_mux_init_signal("hsusb2_clk", OMAP_PIN_OUTPUT); - omap_mux_init_signal("hsusb2_dir", OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_nxt", OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_data0", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_data1", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_data2", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_data3", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_data4", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_data5", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_data6", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_data7", - OMAP_PIN_INPUT_PULLDOWN); - break; - case EHCI_HCD_OMAP_MODE_TLL: - omap_mux_init_signal("hsusb2_tll_stp", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("hsusb2_tll_clk", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_tll_dir", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_tll_nxt", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_tll_data0", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_tll_data1", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_tll_data2", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_tll_data3", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_tll_data4", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_tll_data5", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_tll_data6", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb2_tll_data7", - OMAP_PIN_INPUT_PULLDOWN); - break; - case EHCI_HCD_OMAP_MODE_UNKNOWN: - /* FALLTHROUGH */ - default: - break; - } - - switch (port_mode[2]) { - case EHCI_HCD_OMAP_MODE_PHY: - printk(KERN_WARNING "Port3 can't be used in PHY mode\n"); - break; - case EHCI_HCD_OMAP_MODE_TLL: - omap_mux_init_signal("hsusb3_tll_stp", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("hsusb3_tll_clk", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb3_tll_dir", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb3_tll_nxt", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb3_tll_data0", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb3_tll_data1", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb3_tll_data2", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb3_tll_data3", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb3_tll_data4", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb3_tll_data5", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb3_tll_data6", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("hsusb3_tll_data7", - OMAP_PIN_INPUT_PULLDOWN); - break; - case EHCI_HCD_OMAP_MODE_UNKNOWN: - /* FALLTHROUGH */ - default: - break; - } - - return; -} - -static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) -{ - switch (port_mode[0]) { - case EHCI_HCD_OMAP_MODE_PHY: - omap_mux_init_signal("usbb1_ulpiphy_stp", - OMAP_PIN_OUTPUT); - omap_mux_init_signal("usbb1_ulpiphy_clk", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpiphy_dir", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpiphy_nxt", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpiphy_dat0", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpiphy_dat1", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpiphy_dat2", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpiphy_dat3", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpiphy_dat4", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpiphy_dat5", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpiphy_dat6", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpiphy_dat7", - OMAP_PIN_INPUT_PULLDOWN); - break; - case EHCI_HCD_OMAP_MODE_TLL: - omap_mux_init_signal("usbb1_ulpitll_stp", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("usbb1_ulpitll_clk", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpitll_dir", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpitll_nxt", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpitll_dat0", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpitll_dat1", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpitll_dat2", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpitll_dat3", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpitll_dat4", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpitll_dat5", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpitll_dat6", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpitll_dat7", - OMAP_PIN_INPUT_PULLDOWN); - break; - case EHCI_HCD_OMAP_MODE_UNKNOWN: - default: - break; - } - switch (port_mode[1]) { - case EHCI_HCD_OMAP_MODE_PHY: - omap_mux_init_signal("usbb2_ulpiphy_stp", - OMAP_PIN_OUTPUT); - omap_mux_init_signal("usbb2_ulpiphy_clk", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpiphy_dir", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpiphy_nxt", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpiphy_dat0", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpiphy_dat1", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpiphy_dat2", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpiphy_dat3", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpiphy_dat4", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpiphy_dat5", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpiphy_dat6", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpiphy_dat7", - OMAP_PIN_INPUT_PULLDOWN); - break; - case EHCI_HCD_OMAP_MODE_TLL: - omap_mux_init_signal("usbb2_ulpitll_stp", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("usbb2_ulpitll_clk", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpitll_dir", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpitll_nxt", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpitll_dat0", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpitll_dat1", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpitll_dat2", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpitll_dat3", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpitll_dat4", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpitll_dat5", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpitll_dat6", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpitll_dat7", - OMAP_PIN_INPUT_PULLDOWN); - break; - case EHCI_HCD_OMAP_MODE_UNKNOWN: - default: - break; - } -} - -void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata) -{ - platform_device_add_data(&ehci_device, pdata, sizeof(*pdata)); - - /* Setup Pin IO MUX for EHCI */ - if (cpu_is_omap34xx()) { - ehci_resources[0].start = OMAP34XX_EHCI_BASE; - ehci_resources[0].end = OMAP34XX_EHCI_BASE + SZ_1K - 1; - ehci_resources[1].start = OMAP34XX_UHH_CONFIG_BASE; - ehci_resources[1].end = OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1; - ehci_resources[2].start = OMAP34XX_USBTLL_BASE; - ehci_resources[2].end = OMAP34XX_USBTLL_BASE + SZ_4K - 1; - ehci_resources[3].start = INT_34XX_EHCI_IRQ; - setup_ehci_io_mux(pdata->port_mode); - } else if (cpu_is_omap44xx()) { - ehci_resources[0].start = OMAP44XX_HSUSB_EHCI_BASE; - ehci_resources[0].end = OMAP44XX_HSUSB_EHCI_BASE + SZ_1K - 1; - ehci_resources[1].start = OMAP44XX_UHH_CONFIG_BASE; - ehci_resources[1].end = OMAP44XX_UHH_CONFIG_BASE + SZ_2K - 1; - ehci_resources[2].start = OMAP44XX_USBTLL_BASE; - ehci_resources[2].end = OMAP44XX_USBTLL_BASE + SZ_4K - 1; - ehci_resources[3].start = OMAP44XX_IRQ_EHCI; - setup_4430ehci_io_mux(pdata->port_mode); - } - - ehci_resources[0].name = "ehci"; - ehci_resources[1].name = "uhh"; - ehci_resources[2].name = "tll"; - ehci_resources[3].name = "irq"; - - if (platform_device_register(&ehci_device) < 0) { - printk(KERN_ERR "Unable to register HS-USB (EHCI) device\n"); - return; - } -} - -#else - -void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata) - -{ -} - -#endif /* CONFIG_USB_EHCI_HCD */ - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) - -static struct resource ohci_resources[] = { - { - .name = "ohci", - .start = OMAP34XX_OHCI_BASE, - .end = OMAP34XX_OHCI_BASE + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "uhh", - .start = OMAP34XX_UHH_CONFIG_BASE, - .end = OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "tll", - .start = OMAP34XX_USBTLL_BASE, - .end = OMAP34XX_USBTLL_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - { /* general IRQ */ - .name = "irq", - .start = INT_34XX_OHCI_IRQ, - .flags = IORESOURCE_IRQ, - } -}; - -static u64 ohci_dmamask = DMA_BIT_MASK(32); - -static struct platform_device ohci_device = { - .name = "ohci-omap3", - .id = 0, - .dev = { - .dma_mask = &ohci_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(ohci_resources), - .resource = ohci_resources, -}; - -static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode) -{ - switch (port_mode[0]) { - case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: - case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: - case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: - case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: - omap_mux_init_signal("mm1_rxdp", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("mm1_rxdm", - OMAP_PIN_INPUT_PULLDOWN); - /* FALLTHROUGH */ - case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: - case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: - omap_mux_init_signal("mm1_rxrcv", - OMAP_PIN_INPUT_PULLDOWN); - /* FALLTHROUGH */ - case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: - case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: - omap_mux_init_signal("mm1_txen_n", OMAP_PIN_OUTPUT); - /* FALLTHROUGH */ - case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: - case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: - omap_mux_init_signal("mm1_txse0", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("mm1_txdat", - OMAP_PIN_INPUT_PULLDOWN); - break; - case OMAP_OHCI_PORT_MODE_UNUSED: - /* FALLTHROUGH */ - default: - break; - } - switch (port_mode[1]) { - case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: - case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: - case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: - case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: - omap_mux_init_signal("mm2_rxdp", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("mm2_rxdm", - OMAP_PIN_INPUT_PULLDOWN); - /* FALLTHROUGH */ - case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: - case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: - omap_mux_init_signal("mm2_rxrcv", - OMAP_PIN_INPUT_PULLDOWN); - /* FALLTHROUGH */ - case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: - case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: - omap_mux_init_signal("mm2_txen_n", OMAP_PIN_OUTPUT); - /* FALLTHROUGH */ - case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: - case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: - omap_mux_init_signal("mm2_txse0", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("mm2_txdat", - OMAP_PIN_INPUT_PULLDOWN); - break; - case OMAP_OHCI_PORT_MODE_UNUSED: - /* FALLTHROUGH */ - default: - break; - } - switch (port_mode[2]) { - case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: - case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: - case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: - case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: - omap_mux_init_signal("mm3_rxdp", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("mm3_rxdm", - OMAP_PIN_INPUT_PULLDOWN); - /* FALLTHROUGH */ - case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: - case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: - omap_mux_init_signal("mm3_rxrcv", - OMAP_PIN_INPUT_PULLDOWN); - /* FALLTHROUGH */ - case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: - case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: - omap_mux_init_signal("mm3_txen_n", OMAP_PIN_OUTPUT); - /* FALLTHROUGH */ - case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: - case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: - omap_mux_init_signal("mm3_txse0", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("mm3_txdat", - OMAP_PIN_INPUT_PULLDOWN); - break; - case OMAP_OHCI_PORT_MODE_UNUSED: - /* FALLTHROUGH */ - default: - break; - } -} - -void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata) -{ - platform_device_add_data(&ohci_device, pdata, sizeof(*pdata)); - - /* Setup Pin IO MUX for OHCI */ - if (cpu_is_omap34xx()) - setup_ohci_io_mux(pdata->port_mode); - - if (platform_device_register(&ohci_device) < 0) { - pr_err("Unable to register FS-USB (OHCI) device\n"); - return; - } -} - -#else - -void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata) -{ -} - -#endif /* CONFIG_USB_OHCI_HCD */ diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c new file mode 100644 index 00000000000..45f9b80b6d2 --- /dev/null +++ b/arch/arm/mach-omap2/usb-host.c @@ -0,0 +1,531 @@ +/* + * usb-host.c - OMAP USB Host + * + * This file will contain the board specific details for the + * Synopsys EHCI/OHCI host controller on OMAP3430 and onwards + * + * Copyright (C) 2007-2011 Texas Instruments + * Author: Vikram Pandita + * + * Generalization by: + * Felipe Balbi + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include + +#include "mux.h" + +#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE) + +static struct resource ehci_resources[] = { + { + .flags = IORESOURCE_MEM, + }, + { + .flags = IORESOURCE_MEM, + }, + { + .flags = IORESOURCE_MEM, + }, + { /* general IRQ */ + .flags = IORESOURCE_IRQ, + } +}; + +static u64 ehci_dmamask = ~(u32)0; +static struct platform_device ehci_device = { + .name = "ehci-omap", + .id = 0, + .dev = { + .dma_mask = &ehci_dmamask, + .coherent_dma_mask = 0xffffffff, + .platform_data = NULL, + }, + .num_resources = ARRAY_SIZE(ehci_resources), + .resource = ehci_resources, +}; + +/* MUX settings for EHCI pins */ +/* + * setup_ehci_io_mux - initialize IO pad mux for USBHOST + */ +static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) +{ + switch (port_mode[0]) { + case EHCI_HCD_OMAP_MODE_PHY: + omap_mux_init_signal("hsusb1_stp", OMAP_PIN_OUTPUT); + omap_mux_init_signal("hsusb1_clk", OMAP_PIN_OUTPUT); + omap_mux_init_signal("hsusb1_dir", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_nxt", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data0", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data1", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data2", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data3", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data4", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data5", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data6", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data7", OMAP_PIN_INPUT_PULLDOWN); + break; + case EHCI_HCD_OMAP_MODE_TLL: + omap_mux_init_signal("hsusb1_tll_stp", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("hsusb1_tll_clk", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_dir", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_nxt", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data0", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data1", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data2", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data3", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data4", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data5", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data6", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data7", + OMAP_PIN_INPUT_PULLDOWN); + break; + case EHCI_HCD_OMAP_MODE_UNKNOWN: + /* FALLTHROUGH */ + default: + break; + } + + switch (port_mode[1]) { + case EHCI_HCD_OMAP_MODE_PHY: + omap_mux_init_signal("hsusb2_stp", OMAP_PIN_OUTPUT); + omap_mux_init_signal("hsusb2_clk", OMAP_PIN_OUTPUT); + omap_mux_init_signal("hsusb2_dir", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_nxt", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data0", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data1", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data2", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data3", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data4", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data5", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data6", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data7", + OMAP_PIN_INPUT_PULLDOWN); + break; + case EHCI_HCD_OMAP_MODE_TLL: + omap_mux_init_signal("hsusb2_tll_stp", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("hsusb2_tll_clk", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_dir", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_nxt", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data0", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data1", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data2", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data3", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data4", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data5", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data6", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data7", + OMAP_PIN_INPUT_PULLDOWN); + break; + case EHCI_HCD_OMAP_MODE_UNKNOWN: + /* FALLTHROUGH */ + default: + break; + } + + switch (port_mode[2]) { + case EHCI_HCD_OMAP_MODE_PHY: + printk(KERN_WARNING "Port3 can't be used in PHY mode\n"); + break; + case EHCI_HCD_OMAP_MODE_TLL: + omap_mux_init_signal("hsusb3_tll_stp", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("hsusb3_tll_clk", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_dir", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_nxt", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data0", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data1", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data2", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data3", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data4", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data5", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data6", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data7", + OMAP_PIN_INPUT_PULLDOWN); + break; + case EHCI_HCD_OMAP_MODE_UNKNOWN: + /* FALLTHROUGH */ + default: + break; + } + + return; +} + +static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) +{ + switch (port_mode[0]) { + case EHCI_HCD_OMAP_MODE_PHY: + omap_mux_init_signal("usbb1_ulpiphy_stp", + OMAP_PIN_OUTPUT); + omap_mux_init_signal("usbb1_ulpiphy_clk", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb1_ulpiphy_dir", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb1_ulpiphy_nxt", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb1_ulpiphy_dat0", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb1_ulpiphy_dat1", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb1_ulpiphy_dat2", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb1_ulpiphy_dat3", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb1_ulpiphy_dat4", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb1_ulpiphy_dat5", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb1_ulpiphy_dat6", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb1_ulpiphy_dat7", + OMAP_PIN_INPUT_PULLDOWN); + break; + case EHCI_HCD_OMAP_MODE_TLL: + omap_mux_init_signal("usbb1_ulpitll_stp", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("usbb1_ulpitll_clk", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb1_ulpitll_dir", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb1_ulpitll_nxt", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb1_ulpitll_dat0", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb1_ulpitll_dat1", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb1_ulpitll_dat2", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb1_ulpitll_dat3", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb1_ulpitll_dat4", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb1_ulpitll_dat5", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb1_ulpitll_dat6", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb1_ulpitll_dat7", + OMAP_PIN_INPUT_PULLDOWN); + break; + case EHCI_HCD_OMAP_MODE_UNKNOWN: + default: + break; + } + switch (port_mode[1]) { + case EHCI_HCD_OMAP_MODE_PHY: + omap_mux_init_signal("usbb2_ulpiphy_stp", + OMAP_PIN_OUTPUT); + omap_mux_init_signal("usbb2_ulpiphy_clk", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb2_ulpiphy_dir", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb2_ulpiphy_nxt", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb2_ulpiphy_dat0", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb2_ulpiphy_dat1", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb2_ulpiphy_dat2", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb2_ulpiphy_dat3", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb2_ulpiphy_dat4", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb2_ulpiphy_dat5", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb2_ulpiphy_dat6", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb2_ulpiphy_dat7", + OMAP_PIN_INPUT_PULLDOWN); + break; + case EHCI_HCD_OMAP_MODE_TLL: + omap_mux_init_signal("usbb2_ulpitll_stp", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("usbb2_ulpitll_clk", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb2_ulpitll_dir", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb2_ulpitll_nxt", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb2_ulpitll_dat0", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb2_ulpitll_dat1", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb2_ulpitll_dat2", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb2_ulpitll_dat3", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb2_ulpitll_dat4", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb2_ulpitll_dat5", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb2_ulpitll_dat6", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb2_ulpitll_dat7", + OMAP_PIN_INPUT_PULLDOWN); + break; + case EHCI_HCD_OMAP_MODE_UNKNOWN: + default: + break; + } +} + +void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata) +{ + platform_device_add_data(&ehci_device, pdata, sizeof(*pdata)); + + /* Setup Pin IO MUX for EHCI */ + if (cpu_is_omap34xx()) { + ehci_resources[0].start = OMAP34XX_EHCI_BASE; + ehci_resources[0].end = OMAP34XX_EHCI_BASE + SZ_1K - 1; + ehci_resources[1].start = OMAP34XX_UHH_CONFIG_BASE; + ehci_resources[1].end = OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1; + ehci_resources[2].start = OMAP34XX_USBTLL_BASE; + ehci_resources[2].end = OMAP34XX_USBTLL_BASE + SZ_4K - 1; + ehci_resources[3].start = INT_34XX_EHCI_IRQ; + setup_ehci_io_mux(pdata->port_mode); + } else if (cpu_is_omap44xx()) { + ehci_resources[0].start = OMAP44XX_HSUSB_EHCI_BASE; + ehci_resources[0].end = OMAP44XX_HSUSB_EHCI_BASE + SZ_1K - 1; + ehci_resources[1].start = OMAP44XX_UHH_CONFIG_BASE; + ehci_resources[1].end = OMAP44XX_UHH_CONFIG_BASE + SZ_2K - 1; + ehci_resources[2].start = OMAP44XX_USBTLL_BASE; + ehci_resources[2].end = OMAP44XX_USBTLL_BASE + SZ_4K - 1; + ehci_resources[3].start = OMAP44XX_IRQ_EHCI; + setup_4430ehci_io_mux(pdata->port_mode); + } + + ehci_resources[0].name = "ehci"; + ehci_resources[1].name = "uhh"; + ehci_resources[2].name = "tll"; + ehci_resources[3].name = "irq"; + + if (platform_device_register(&ehci_device) < 0) { + printk(KERN_ERR "Unable to register HS-USB (EHCI) device\n"); + return; + } +} + +#else + +void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata) + +{ +} + +#endif /* CONFIG_USB_EHCI_HCD */ + +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) + +static struct resource ohci_resources[] = { + { + .name = "ohci", + .start = OMAP34XX_OHCI_BASE, + .end = OMAP34XX_OHCI_BASE + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "uhh", + .start = OMAP34XX_UHH_CONFIG_BASE, + .end = OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "tll", + .start = OMAP34XX_USBTLL_BASE, + .end = OMAP34XX_USBTLL_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { /* general IRQ */ + .name = "irq", + .start = INT_34XX_OHCI_IRQ, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 ohci_dmamask = DMA_BIT_MASK(32); + +static struct platform_device ohci_device = { + .name = "ohci-omap3", + .id = 0, + .dev = { + .dma_mask = &ohci_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(ohci_resources), + .resource = ohci_resources, +}; + +static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode) +{ + switch (port_mode[0]) { + case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: + case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: + omap_mux_init_signal("mm1_rxdp", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("mm1_rxdm", + OMAP_PIN_INPUT_PULLDOWN); + /* FALLTHROUGH */ + case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: + case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: + omap_mux_init_signal("mm1_rxrcv", + OMAP_PIN_INPUT_PULLDOWN); + /* FALLTHROUGH */ + case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: + omap_mux_init_signal("mm1_txen_n", OMAP_PIN_OUTPUT); + /* FALLTHROUGH */ + case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: + omap_mux_init_signal("mm1_txse0", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("mm1_txdat", + OMAP_PIN_INPUT_PULLDOWN); + break; + case OMAP_OHCI_PORT_MODE_UNUSED: + /* FALLTHROUGH */ + default: + break; + } + switch (port_mode[1]) { + case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: + case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: + omap_mux_init_signal("mm2_rxdp", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("mm2_rxdm", + OMAP_PIN_INPUT_PULLDOWN); + /* FALLTHROUGH */ + case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: + case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: + omap_mux_init_signal("mm2_rxrcv", + OMAP_PIN_INPUT_PULLDOWN); + /* FALLTHROUGH */ + case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: + omap_mux_init_signal("mm2_txen_n", OMAP_PIN_OUTPUT); + /* FALLTHROUGH */ + case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: + omap_mux_init_signal("mm2_txse0", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("mm2_txdat", + OMAP_PIN_INPUT_PULLDOWN); + break; + case OMAP_OHCI_PORT_MODE_UNUSED: + /* FALLTHROUGH */ + default: + break; + } + switch (port_mode[2]) { + case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: + case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: + omap_mux_init_signal("mm3_rxdp", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("mm3_rxdm", + OMAP_PIN_INPUT_PULLDOWN); + /* FALLTHROUGH */ + case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: + case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: + omap_mux_init_signal("mm3_rxrcv", + OMAP_PIN_INPUT_PULLDOWN); + /* FALLTHROUGH */ + case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: + omap_mux_init_signal("mm3_txen_n", OMAP_PIN_OUTPUT); + /* FALLTHROUGH */ + case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: + omap_mux_init_signal("mm3_txse0", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("mm3_txdat", + OMAP_PIN_INPUT_PULLDOWN); + break; + case OMAP_OHCI_PORT_MODE_UNUSED: + /* FALLTHROUGH */ + default: + break; + } +} + +void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata) +{ + platform_device_add_data(&ohci_device, pdata, sizeof(*pdata)); + + /* Setup Pin IO MUX for OHCI */ + if (cpu_is_omap34xx()) + setup_ohci_io_mux(pdata->port_mode); + + if (platform_device_register(&ohci_device) < 0) { + pr_err("Unable to register FS-USB (OHCI) device\n"); + return; + } +} + +#else + +void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata) +{ +} + +#endif /* CONFIG_USB_OHCI_HCD */ -- cgit v1.2.3-18-g5258 From 181b250cf53233a7a7c6d7e1e9df402506712e93 Mon Sep 17 00:00:00 2001 From: Keshava Munegowda Date: Tue, 1 Mar 2011 20:08:16 +0530 Subject: arm: omap: usb: create common enums and structures for ehci and ohci Create the ehci and ohci specific platform data structures. The port enum values are made common for both ehci and ohci. Signed-off-by: Keshava Munegowda Signed-off-by: Felipe Balbi --- arch/arm/mach-omap2/board-3430sdp.c | 10 +++--- arch/arm/mach-omap2/board-3630sdp.c | 10 +++--- arch/arm/mach-omap2/board-4430sdp.c | 10 +++--- arch/arm/mach-omap2/board-am3517crane.c | 10 +++--- arch/arm/mach-omap2/board-am3517evm.c | 12 +++---- arch/arm/mach-omap2/board-cm-t35.c | 10 +++--- arch/arm/mach-omap2/board-cm-t3517.c | 8 ++--- arch/arm/mach-omap2/board-devkit8000.c | 10 +++--- arch/arm/mach-omap2/board-igep0020.c | 10 +++--- arch/arm/mach-omap2/board-igep0030.c | 10 +++--- arch/arm/mach-omap2/board-omap3beagle.c | 10 +++--- arch/arm/mach-omap2/board-omap3evm.c | 14 ++++---- arch/arm/mach-omap2/board-omap3pandora.c | 10 +++--- arch/arm/mach-omap2/board-omap3stalker.c | 10 +++--- arch/arm/mach-omap2/board-omap3touchbook.c | 10 +++--- arch/arm/mach-omap2/board-omap4panda.c | 10 +++--- arch/arm/mach-omap2/board-overo.c | 10 +++--- arch/arm/mach-omap2/board-zoom.c | 10 +++--- arch/arm/mach-omap2/usb-host.c | 50 +++++++++++++-------------- arch/arm/plat-omap/include/plat/usb.h | 54 +++++++++++++++++++----------- 20 files changed, 152 insertions(+), 136 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index d4e41ef86aa..a991aeb5609 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -653,11 +653,11 @@ static void enable_board_wakeup_source(void) OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); } -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = 57, @@ -816,7 +816,7 @@ static void __init omap_3430sdp_init(void) board_flash_init(sdp_flash_partitions, chip_sel_3430); sdp3430_display_init(); enable_board_wakeup_source(); - usb_ehci_init(&ehci_pdata); + usb_ehci_init(&usbhs_bdata); } MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board") diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index 62645640f5e..03fd8aca3cc 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -54,11 +54,11 @@ static void enable_board_wakeup_source(void) OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); } -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = 126, @@ -211,7 +211,7 @@ static void __init omap_sdp_init(void) board_smc91x_init(); board_flash_init(sdp_flash_partitions, chip_sel_sdp); enable_board_wakeup_source(); - usb_ehci_init(&ehci_pdata); + usb_ehci_init(&usbhs_bdata); } MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board") diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 9cf8e333255..0e1609d3fa8 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -251,10 +251,10 @@ static void __init omap_4430sdp_init_irq(void) gic_init_irq(); } -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = false, .reset_gpio_port[0] = -EINVAL, .reset_gpio_port[1] = -EINVAL, @@ -584,7 +584,7 @@ static void __init omap_4430sdp_init(void) else gpio_direction_output(OMAP4SDP_MDM_PWR_EN_GPIO, 1); - usb_ehci_init(&ehci_pdata); + usb_ehci_init(&usbhs_bdata); usb_musb_init(&musb_board_data); status = omap_ethernet_init(); diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index 71acb5ab281..1b825a00c5b 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -59,10 +59,10 @@ static void __init am3517_crane_init_irq(void) omap_init_irq(); } -static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, +static struct usbhs_omap_board_data usbhs_bdata __initdata = { + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = GPIO_USB_NRESET, @@ -103,7 +103,7 @@ static void __init am3517_crane_init(void) return; } - usb_ehci_init(&ehci_pdata); + usb_ehci_init(&usbhs_bdata); } MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD") diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 10d60b7743c..f5bc1c6ccf5 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -430,15 +430,15 @@ static __init void am3517_evm_musb_init(void) usb_musb_init(&musb_board_data); } -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, #if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \ defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE) - .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, #else - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, #endif - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = 57, @@ -502,7 +502,7 @@ static void __init am3517_evm_init(void) /* Configure GPIO for EHCI port */ omap_mux_init_gpio(57, OMAP_PIN_OUTPUT); - usb_ehci_init(&ehci_pdata); + usb_ehci_init(&usbhs_bdata); am3517_evm_hecc_init(&am3517_evm_hecc_pdata); /* DSS */ am3517_evm_display_init(); diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index dac14161066..c79aa9be72f 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -605,10 +605,10 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; -static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, +static struct usbhs_omap_board_data usbhs_bdata __initdata = { + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = OMAP_MAX_GPIO_LINES + 6, @@ -810,7 +810,7 @@ static void __init cm_t35_init(void) cm_t35_init_display(); usb_musb_init(&musb_board_data); - usb_ehci_init(&ehci_pdata); + usb_ehci_init(&usbhs_bdata); } MACHINE_START(CM_T35, "Compulab CM-T35") diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index 8f9a64d650e..8288a0b9159 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -167,10 +167,10 @@ static inline void cm_t3517_init_rtc(void) {} #define HSUSB2_RESET_GPIO (147) #define USB_HUB_RESET_GPIO (152) -static struct ehci_hcd_omap_platform_data cm_t3517_ehci_pdata __initdata = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, +static struct usbhs_omap_board_data cm_t3517_ehci_pdata __initdata = { + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = HSUSB1_RESET_GPIO, diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 9a2a31e011c..e0131dda579 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -620,11 +620,11 @@ static struct omap_musb_board_data musb_board_data = { .power = 100, }; -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = -EINVAL, @@ -803,7 +803,7 @@ static void __init devkit8000_init(void) devkit8000_ads7846_init(); usb_musb_init(&musb_board_data); - usb_ehci_init(&ehci_pdata); + usb_ehci_init(&usbhs_bdata); devkit8000_flash_init(); /* Ensure SDRC pins are mux'd for self-refresh */ diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 3be85a1f55f..a9d7d1dc63a 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -627,10 +627,10 @@ static struct omap_musb_board_data musb_board_data = { .power = 100, }; -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = IGEP2_GPIO_USBH_NRESET, @@ -699,7 +699,7 @@ static void __init igep2_init(void) platform_add_devices(igep2_devices, ARRAY_SIZE(igep2_devices)); omap_serial_init(); usb_musb_init(&musb_board_data); - usb_ehci_init(&ehci_pdata); + usb_ehci_init(&usbhs_bdata); igep2_flash_init(); igep2_leds_init(); diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c index 4dc62a9b9cb..1b441eafdba 100644 --- a/arch/arm/mach-omap2/board-igep0030.c +++ b/arch/arm/mach-omap2/board-igep0030.c @@ -408,10 +408,10 @@ static void __init igep3_wifi_bt_init(void) void __init igep3_wifi_bt_init(void) {} #endif -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { + .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = -EINVAL, @@ -435,7 +435,7 @@ static void __init igep3_init(void) platform_add_devices(igep3_devices, ARRAY_SIZE(igep3_devices)); omap_serial_init(); usb_musb_init(&musb_board_data); - usb_ehci_init(&ehci_pdata); + usb_ehci_init(&usbhs_bdata); igep3_flash_init(); igep3_leds_init(); diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 46d814ab565..b84a6418ec1 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -586,11 +586,11 @@ static void __init omap3beagle_flash_init(void) } } -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = -EINVAL, @@ -625,7 +625,7 @@ static void __init omap3_beagle_init(void) gpio_direction_output(170, true); usb_musb_init(&musb_board_data); - usb_ehci_init(&ehci_pdata); + usb_ehci_init(&usbhs_bdata); omap3beagle_flash_init(); /* Ensure SDRC pins are mux'd for self-refresh */ diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 323c3809ce3..ed5e4118147 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -638,11 +638,11 @@ static struct platform_device *omap3_evm_devices[] __initdata = { &omap3_evm_dss_device, }; -static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = { +static struct usbhs_omap_board_data usbhs_bdata __initdata = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, /* PHY reset GPIO will be runtime programmed based on EVM version */ @@ -700,7 +700,7 @@ static void __init omap3_evm_init(void) /* setup EHCI phy reset config */ omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP); - ehci_pdata.reset_gpio_port[1] = 21; + usbhs_bdata.reset_gpio_port[1] = 21; /* EVM REV >= E can supply 500mA with EXTVBUS programming */ musb_board_data.power = 500; @@ -708,10 +708,10 @@ static void __init omap3_evm_init(void) } else { /* setup EHCI phy reset on MDC */ omap_mux_init_gpio(135, OMAP_PIN_OUTPUT); - ehci_pdata.reset_gpio_port[1] = 135; + usbhs_bdata.reset_gpio_port[1] = 135; } usb_musb_init(&musb_board_data); - usb_ehci_init(&ehci_pdata); + usb_ehci_init(&usbhs_bdata); ads7846_dev_init(); omap3evm_init_smsc911x(); omap3_evm_display_init(); diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 0b34beded11..241e632a466 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -681,11 +681,11 @@ static struct platform_device *omap3pandora_devices[] __initdata = { &pandora_vwlan_device, }; -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = 16, @@ -716,7 +716,7 @@ static void __init omap3pandora_init(void) spi_register_board_info(omap3pandora_spi_board_info, ARRAY_SIZE(omap3pandora_spi_board_info)); omap3pandora_ads7846_init(); - usb_ehci_init(&ehci_pdata); + usb_ehci_init(&usbhs_bdata); usb_musb_init(&musb_board_data); gpmc_nand_init(&pandora_nand_data); diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 2a2dad447e8..eaad924b624 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -608,10 +608,10 @@ static struct platform_device *omap3_stalker_devices[] __initdata = { &keys_gpio, }; -static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, +static struct usbhs_omap_board_data usbhs_bdata __initconst = { + .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = -EINVAL, @@ -649,7 +649,7 @@ static void __init omap3_stalker_init(void) omap_serial_init(); usb_musb_init(&musb_board_data); - usb_ehci_init(&ehci_pdata); + usb_ehci_init(&usbhs_bdata); ads7846_dev_init(); omap_mux_init_gpio(21, OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index db1f74fe6c4..4e3a1ae2ac9 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -468,11 +468,11 @@ static void __init omap3touchbook_flash_init(void) } } -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = -EINVAL, @@ -527,7 +527,7 @@ static void __init omap3_touchbook_init(void) ARRAY_SIZE(omap3_ads7846_spi_board_info)); omap3_ads7846_init(); usb_musb_init(&musb_board_data); - usb_ehci_init(&ehci_pdata); + usb_ehci_init(&usbhs_bdata); omap3touchbook_flash_init(); /* Ensure SDRC pins are mux'd for self-refresh */ diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 77748f81366..b88c1909434 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -83,10 +83,10 @@ static void __init omap4_panda_init_irq(void) gic_init_irq(); } -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = false, .reset_gpio_port[0] = -EINVAL, .reset_gpio_port[1] = -EINVAL, @@ -128,7 +128,7 @@ static void __init omap4_ehci_init(void) gpio_set_value(GPIO_HUB_NRESET, 0); gpio_set_value(GPIO_HUB_NRESET, 1); - usb_ehci_init(&ehci_pdata); + usb_ehci_init(&usbhs_bdata); /* enable power to hub */ gpio_set_value(GPIO_HUB_POWER, 1); diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index cb26e5d8268..f78b74c369d 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -423,10 +423,10 @@ static struct platform_device *overo_devices[] __initdata = { &overo_lcd_device, }; -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { + .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = -EINVAL, @@ -454,7 +454,7 @@ static void __init overo_init(void) omap_serial_init(); overo_flash_init(); usb_musb_init(&musb_board_data); - usb_ehci_init(&ehci_pdata); + usb_ehci_init(&usbhs_bdata); overo_ads7846_init(); overo_init_smsc911x(); diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c index e26754c24ee..19b99128df7 100644 --- a/arch/arm/mach-omap2/board-zoom.c +++ b/arch/arm/mach-omap2/board-zoom.c @@ -106,10 +106,10 @@ static struct mtd_partition zoom_nand_partitions[] = { }, }; -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { + .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = -EINVAL, .reset_gpio_port[1] = ZOOM3_EHCI_RESET_GPIO, @@ -123,7 +123,7 @@ static void __init omap_zoom_init(void) } else if (machine_is_omap_zoom3()) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); omap_mux_init_gpio(ZOOM3_EHCI_RESET_GPIO, OMAP_PIN_OUTPUT); - usb_ehci_init(&ehci_pdata); + usb_ehci_init(&usbhs_bdata); } board_nand_init(zoom_nand_partitions, diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index 45f9b80b6d2..b04ce6f8f01 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -64,10 +64,10 @@ static struct platform_device ehci_device = { /* * setup_ehci_io_mux - initialize IO pad mux for USBHOST */ -static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) +static void setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode) { switch (port_mode[0]) { - case EHCI_HCD_OMAP_MODE_PHY: + case OMAP_EHCI_PORT_MODE_PHY: omap_mux_init_signal("hsusb1_stp", OMAP_PIN_OUTPUT); omap_mux_init_signal("hsusb1_clk", OMAP_PIN_OUTPUT); omap_mux_init_signal("hsusb1_dir", OMAP_PIN_INPUT_PULLDOWN); @@ -81,7 +81,7 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) omap_mux_init_signal("hsusb1_data6", OMAP_PIN_INPUT_PULLDOWN); omap_mux_init_signal("hsusb1_data7", OMAP_PIN_INPUT_PULLDOWN); break; - case EHCI_HCD_OMAP_MODE_TLL: + case OMAP_EHCI_PORT_MODE_TLL: omap_mux_init_signal("hsusb1_tll_stp", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("hsusb1_tll_clk", @@ -107,14 +107,14 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) omap_mux_init_signal("hsusb1_tll_data7", OMAP_PIN_INPUT_PULLDOWN); break; - case EHCI_HCD_OMAP_MODE_UNKNOWN: + case OMAP_USBHS_PORT_MODE_UNUSED: /* FALLTHROUGH */ default: break; } switch (port_mode[1]) { - case EHCI_HCD_OMAP_MODE_PHY: + case OMAP_EHCI_PORT_MODE_PHY: omap_mux_init_signal("hsusb2_stp", OMAP_PIN_OUTPUT); omap_mux_init_signal("hsusb2_clk", OMAP_PIN_OUTPUT); omap_mux_init_signal("hsusb2_dir", OMAP_PIN_INPUT_PULLDOWN); @@ -136,7 +136,7 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) omap_mux_init_signal("hsusb2_data7", OMAP_PIN_INPUT_PULLDOWN); break; - case EHCI_HCD_OMAP_MODE_TLL: + case OMAP_EHCI_PORT_MODE_TLL: omap_mux_init_signal("hsusb2_tll_stp", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("hsusb2_tll_clk", @@ -162,17 +162,17 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) omap_mux_init_signal("hsusb2_tll_data7", OMAP_PIN_INPUT_PULLDOWN); break; - case EHCI_HCD_OMAP_MODE_UNKNOWN: + case OMAP_USBHS_PORT_MODE_UNUSED: /* FALLTHROUGH */ default: break; } switch (port_mode[2]) { - case EHCI_HCD_OMAP_MODE_PHY: + case OMAP_EHCI_PORT_MODE_PHY: printk(KERN_WARNING "Port3 can't be used in PHY mode\n"); break; - case EHCI_HCD_OMAP_MODE_TLL: + case OMAP_EHCI_PORT_MODE_TLL: omap_mux_init_signal("hsusb3_tll_stp", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("hsusb3_tll_clk", @@ -198,7 +198,7 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) omap_mux_init_signal("hsusb3_tll_data7", OMAP_PIN_INPUT_PULLDOWN); break; - case EHCI_HCD_OMAP_MODE_UNKNOWN: + case OMAP_USBHS_PORT_MODE_UNUSED: /* FALLTHROUGH */ default: break; @@ -207,10 +207,10 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) return; } -static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) +static void setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode) { switch (port_mode[0]) { - case EHCI_HCD_OMAP_MODE_PHY: + case OMAP_EHCI_PORT_MODE_PHY: omap_mux_init_signal("usbb1_ulpiphy_stp", OMAP_PIN_OUTPUT); omap_mux_init_signal("usbb1_ulpiphy_clk", @@ -236,7 +236,7 @@ static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) omap_mux_init_signal("usbb1_ulpiphy_dat7", OMAP_PIN_INPUT_PULLDOWN); break; - case EHCI_HCD_OMAP_MODE_TLL: + case OMAP_EHCI_PORT_MODE_TLL: omap_mux_init_signal("usbb1_ulpitll_stp", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("usbb1_ulpitll_clk", @@ -262,12 +262,12 @@ static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) omap_mux_init_signal("usbb1_ulpitll_dat7", OMAP_PIN_INPUT_PULLDOWN); break; - case EHCI_HCD_OMAP_MODE_UNKNOWN: + case OMAP_USBHS_PORT_MODE_UNUSED: default: break; } switch (port_mode[1]) { - case EHCI_HCD_OMAP_MODE_PHY: + case OMAP_EHCI_PORT_MODE_PHY: omap_mux_init_signal("usbb2_ulpiphy_stp", OMAP_PIN_OUTPUT); omap_mux_init_signal("usbb2_ulpiphy_clk", @@ -293,7 +293,7 @@ static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) omap_mux_init_signal("usbb2_ulpiphy_dat7", OMAP_PIN_INPUT_PULLDOWN); break; - case EHCI_HCD_OMAP_MODE_TLL: + case OMAP_EHCI_PORT_MODE_TLL: omap_mux_init_signal("usbb2_ulpitll_stp", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("usbb2_ulpitll_clk", @@ -319,13 +319,13 @@ static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) omap_mux_init_signal("usbb2_ulpitll_dat7", OMAP_PIN_INPUT_PULLDOWN); break; - case EHCI_HCD_OMAP_MODE_UNKNOWN: + case OMAP_USBHS_PORT_MODE_UNUSED: default: break; } } -void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata) +void __init usb_ehci_init(const struct usbhs_omap_board_data *pdata) { platform_device_add_data(&ehci_device, pdata, sizeof(*pdata)); @@ -363,7 +363,7 @@ void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata) #else -void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata) +void __init usb_ehci_init(const struct usbhs_omap_board_data *pdata) { } @@ -411,7 +411,7 @@ static struct platform_device ohci_device = { .resource = ohci_resources, }; -static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode) +static void setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) { switch (port_mode[0]) { case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: @@ -439,7 +439,7 @@ static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode) omap_mux_init_signal("mm1_txdat", OMAP_PIN_INPUT_PULLDOWN); break; - case OMAP_OHCI_PORT_MODE_UNUSED: + case OMAP_USBHS_PORT_MODE_UNUSED: /* FALLTHROUGH */ default: break; @@ -470,7 +470,7 @@ static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode) omap_mux_init_signal("mm2_txdat", OMAP_PIN_INPUT_PULLDOWN); break; - case OMAP_OHCI_PORT_MODE_UNUSED: + case OMAP_USBHS_PORT_MODE_UNUSED: /* FALLTHROUGH */ default: break; @@ -501,14 +501,14 @@ static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode) omap_mux_init_signal("mm3_txdat", OMAP_PIN_INPUT_PULLDOWN); break; - case OMAP_OHCI_PORT_MODE_UNUSED: + case OMAP_USBHS_PORT_MODE_UNUSED: /* FALLTHROUGH */ default: break; } } -void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata) +void __init usb_ohci_init(const struct usbhs_omap_board_data *pdata) { platform_device_add_data(&ohci_device, pdata, sizeof(*pdata)); @@ -524,7 +524,7 @@ void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata) #else -void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata) +void __init usb_ohci_init(const struct usbhs_omap_board_data *pdata) { } diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index f888e0e57dc..32dfe08023a 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -7,15 +7,12 @@ #include #define OMAP3_HS_USB_PORTS 3 -enum ehci_hcd_omap_mode { - EHCI_HCD_OMAP_MODE_UNKNOWN, - EHCI_HCD_OMAP_MODE_PHY, - EHCI_HCD_OMAP_MODE_TLL, - EHCI_HCD_OMAP_MODE_HSIC, -}; -enum ohci_omap3_port_mode { - OMAP_OHCI_PORT_MODE_UNUSED, +enum usbhs_omap_port_mode { + OMAP_USBHS_PORT_MODE_UNUSED, + OMAP_EHCI_PORT_MODE_PHY, + OMAP_EHCI_PORT_MODE_TLL, + OMAP_EHCI_PORT_MODE_HSIC, OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0, OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM, OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0, @@ -25,24 +22,45 @@ enum ohci_omap3_port_mode { OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0, OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM, OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0, - OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM, + OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM }; -struct ehci_hcd_omap_platform_data { - enum ehci_hcd_omap_mode port_mode[OMAP3_HS_USB_PORTS]; - unsigned phy_reset:1; +struct usbhs_omap_board_data { + enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; /* have to be valid if phy_reset is true and portx is in phy mode */ int reset_gpio_port[OMAP3_HS_USB_PORTS]; + + /* Set this to true for ES2.x silicon */ + unsigned es2_compatibility:1; + + unsigned phy_reset:1; + + /* + * Regulators for USB PHYs. + * Each PHY can have a separate regulator. + */ + struct regulator *regulator[OMAP3_HS_USB_PORTS]; }; -struct ohci_hcd_omap_platform_data { - enum ohci_omap3_port_mode port_mode[OMAP3_HS_USB_PORTS]; +struct ehci_hcd_omap_platform_data { + enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; + int reset_gpio_port[OMAP3_HS_USB_PORTS]; + struct regulator *regulator[OMAP3_HS_USB_PORTS]; + unsigned phy_reset:1; +}; - /* Set this to true for ES2.x silicon */ +struct ohci_hcd_omap_platform_data { + enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; unsigned es2_compatibility:1; }; +struct usbhs_omap_platform_data { + enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; + + struct ehci_hcd_omap_platform_data *ehci_data; + struct ohci_hcd_omap_platform_data *ohci_data; +}; /*-------------------------------------------------------------------------*/ #define OMAP1_OTG_BASE 0xfffb0400 @@ -80,19 +98,17 @@ enum musb_interface {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI}; extern void usb_musb_init(struct omap_musb_board_data *board_data); -extern void usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata); +extern void usb_ehci_init(const struct usbhs_omap_board_data *pdata); -extern void usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata); +extern void usb_ohci_init(const struct usbhs_omap_board_data *pdata); extern int omap4430_phy_power(struct device *dev, int ID, int on); extern int omap4430_phy_set_clk(struct device *dev, int on); extern int omap4430_phy_init(struct device *dev); extern int omap4430_phy_exit(struct device *dev); extern int omap4430_phy_suspend(struct device *dev, int suspend); - #endif - /* * FIXME correct answer depends on hmc_mode, * as does (on omap1) any nonzero value for config->otg port number -- cgit v1.2.3-18-g5258 From 17cdd29d6e1ab4164c792d78c6f096fbafb94e3f Mon Sep 17 00:00:00 2001 From: Keshava Munegowda Date: Tue, 1 Mar 2011 20:08:17 +0530 Subject: usb: host: omap: common usb host core driver enabling and disabling the common clocks for ehci and ohci is implemented. usbhs is a common parent platform driver for EHCI and OHCI driver. This driver receives the clock enable and disable requests from ehci and ohci drivers.The UHH and TLL initialization is also performed. Signed-off-by: Keshava Munegowda Signed-off-by: Felipe Balbi --- arch/arm/plat-omap/include/plat/usb.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index 32dfe08023a..5dd27764eb6 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -102,6 +102,9 @@ extern void usb_ehci_init(const struct usbhs_omap_board_data *pdata); extern void usb_ohci_init(const struct usbhs_omap_board_data *pdata); +extern int omap_usbhs_enable(struct device *dev); +extern void omap_usbhs_disable(struct device *dev); + extern int omap4430_phy_power(struct device *dev, int ID, int on); extern int omap4430_phy_set_clk(struct device *dev, int on); extern int omap4430_phy_init(struct device *dev); -- cgit v1.2.3-18-g5258 From 2236396d4d23828a0875a4d447103d0ab48aed0b Mon Sep 17 00:00:00 2001 From: Keshava Munegowda Date: Tue, 1 Mar 2011 20:08:18 +0530 Subject: arm: omap: usb: usbhs core device initialization A new usbhs platform device is defined; this device will be the parent device of ehci and ohci platform devices. the usbhs_init function is defined which does the usbhs device initialization and I/O mux of ehci and ohci. Signed-off-by: Keshava Munegowda Signed-off-by: Felipe Balbi --- arch/arm/mach-omap2/usb-host.c | 195 +++++++++++++++++++++++++++++++--- arch/arm/plat-omap/include/plat/usb.h | 2 + 2 files changed, 183 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index b04ce6f8f01..ab063820874 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -6,6 +6,7 @@ * * Copyright (C) 2007-2011 Texas Instruments * Author: Vikram Pandita + * Author: Keshava Munegowda * * Generalization by: * Felipe Balbi @@ -19,7 +20,7 @@ #include #include #include -#include +#include #include #include @@ -30,7 +31,7 @@ #include "mux.h" -#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE) +#ifdef CONFIG_MFD_OMAP_USB_HOST static struct resource ehci_resources[] = { { @@ -361,17 +362,6 @@ void __init usb_ehci_init(const struct usbhs_omap_board_data *pdata) } } -#else - -void __init usb_ehci_init(const struct usbhs_omap_board_data *pdata) - -{ -} - -#endif /* CONFIG_USB_EHCI_HCD */ - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) - static struct resource ohci_resources[] = { { .name = "ohci", @@ -508,6 +498,77 @@ static void setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) } } +static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) +{ + switch (port_mode[0]) { + case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: + case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: + omap_mux_init_signal("usbb1_mm_rxdp", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb1_mm_rxdm", + OMAP_PIN_INPUT_PULLDOWN); + + case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: + case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: + omap_mux_init_signal("usbb1_mm_rxrcv", + OMAP_PIN_INPUT_PULLDOWN); + + case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: + omap_mux_init_signal("usbb1_mm_txen", + OMAP_PIN_INPUT_PULLDOWN); + + + case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: + omap_mux_init_signal("usbb1_mm_txdat", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb1_mm_txse0", + OMAP_PIN_INPUT_PULLDOWN); + break; + + case OMAP_USBHS_PORT_MODE_UNUSED: + default: + break; + } + + switch (port_mode[1]) { + case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: + case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: + omap_mux_init_signal("usbb2_mm_rxdp", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb2_mm_rxdm", + OMAP_PIN_INPUT_PULLDOWN); + + case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: + case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: + omap_mux_init_signal("usbb2_mm_rxrcv", + OMAP_PIN_INPUT_PULLDOWN); + + case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: + omap_mux_init_signal("usbb2_mm_txen", + OMAP_PIN_INPUT_PULLDOWN); + + + case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: + omap_mux_init_signal("usbb2_mm_txdat", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb2_mm_txse0", + OMAP_PIN_INPUT_PULLDOWN); + break; + + case OMAP_USBHS_PORT_MODE_UNUSED: + default: + break; + } +} + void __init usb_ohci_init(const struct usbhs_omap_board_data *pdata) { platform_device_add_data(&ohci_device, pdata, sizeof(*pdata)); @@ -522,10 +583,116 @@ void __init usb_ohci_init(const struct usbhs_omap_board_data *pdata) } } +#define OMAP_USBHS_DEVICE "usbhs-omap" + +static struct resource usbhs_resources[] = { + { + .name = "uhh", + .flags = IORESOURCE_MEM, + }, + { + .name = "tll", + .flags = IORESOURCE_MEM, + }, + { + .name = "ehci", + .flags = IORESOURCE_MEM, + }, + { + .name = "ehci-irq", + .flags = IORESOURCE_IRQ, + }, + { + .name = "ohci", + .flags = IORESOURCE_MEM, + }, + { + .name = "ohci-irq", + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device usbhs_device = { + .name = OMAP_USBHS_DEVICE, + .id = 0, + .num_resources = ARRAY_SIZE(usbhs_resources), + .resource = usbhs_resources, +}; + +static struct usbhs_omap_platform_data usbhs_data; +static struct ehci_hcd_omap_platform_data ehci_data; +static struct ohci_hcd_omap_platform_data ohci_data; + +void __init usbhs_init(const struct usbhs_omap_board_data *pdata) +{ + int i; + + for (i = 0; i < OMAP3_HS_USB_PORTS; i++) { + usbhs_data.port_mode[i] = pdata->port_mode[i]; + ohci_data.port_mode[i] = pdata->port_mode[i]; + ehci_data.port_mode[i] = pdata->port_mode[i]; + ehci_data.reset_gpio_port[i] = pdata->reset_gpio_port[i]; + ehci_data.regulator[i] = pdata->regulator[i]; + } + ehci_data.phy_reset = pdata->phy_reset; + ohci_data.es2_compatibility = pdata->es2_compatibility; + usbhs_data.ehci_data = &ehci_data; + usbhs_data.ohci_data = &ohci_data; + + if (cpu_is_omap34xx()) { + usbhs_resources[0].start = OMAP34XX_UHH_CONFIG_BASE; + usbhs_resources[0].end = OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1; + usbhs_resources[1].start = OMAP34XX_USBTLL_BASE; + usbhs_resources[1].end = OMAP34XX_USBTLL_BASE + SZ_4K - 1; + usbhs_resources[2].start = OMAP34XX_EHCI_BASE; + usbhs_resources[2].end = OMAP34XX_EHCI_BASE + SZ_1K - 1; + usbhs_resources[3].start = INT_34XX_EHCI_IRQ; + usbhs_resources[4].start = OMAP34XX_OHCI_BASE; + usbhs_resources[4].end = OMAP34XX_OHCI_BASE + SZ_1K - 1; + usbhs_resources[5].start = INT_34XX_OHCI_IRQ; + setup_ehci_io_mux(pdata->port_mode); + setup_ohci_io_mux(pdata->port_mode); + } else if (cpu_is_omap44xx()) { + usbhs_resources[0].start = OMAP44XX_UHH_CONFIG_BASE; + usbhs_resources[0].end = OMAP44XX_UHH_CONFIG_BASE + SZ_1K - 1; + usbhs_resources[1].start = OMAP44XX_USBTLL_BASE; + usbhs_resources[1].end = OMAP44XX_USBTLL_BASE + SZ_4K - 1; + usbhs_resources[2].start = OMAP44XX_HSUSB_EHCI_BASE; + usbhs_resources[2].end = OMAP44XX_HSUSB_EHCI_BASE + SZ_1K - 1; + usbhs_resources[3].start = OMAP44XX_IRQ_EHCI; + usbhs_resources[4].start = OMAP44XX_HSUSB_OHCI_BASE; + usbhs_resources[4].end = OMAP44XX_HSUSB_OHCI_BASE + SZ_1K - 1; + usbhs_resources[5].start = OMAP44XX_IRQ_OHCI; + setup_4430ehci_io_mux(pdata->port_mode); + setup_4430ohci_io_mux(pdata->port_mode); + } + + if (platform_device_add_data(&usbhs_device, + &usbhs_data, sizeof(usbhs_data)) < 0) { + printk(KERN_ERR "USBHS platform_device_add_data failed\n"); + goto init_end; + } + + if (platform_device_register(&usbhs_device) < 0) + printk(KERN_ERR "USBHS platform_device_register failed\n"); + +init_end: + return; +} + #else +void __init usbhs_init(const struct usbhs_omap_board_data *pdata) +{ +} + void __init usb_ohci_init(const struct usbhs_omap_board_data *pdata) { } -#endif /* CONFIG_USB_OHCI_HCD */ +void __init usb_ehci_init(const struct usbhs_omap_board_data *pdata) +{ +} +#endif + + diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index 5dd27764eb6..4c8bdb835fa 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -102,6 +102,8 @@ extern void usb_ehci_init(const struct usbhs_omap_board_data *pdata); extern void usb_ohci_init(const struct usbhs_omap_board_data *pdata); +extern void usbhs_init(const struct usbhs_omap_board_data *pdata); + extern int omap_usbhs_enable(struct device *dev); extern void omap_usbhs_disable(struct device *dev); -- cgit v1.2.3-18-g5258 From 9e64bb1e9f0613093b3e34ac5402fcfef0dcc35a Mon Sep 17 00:00:00 2001 From: Keshava Munegowda Date: Tue, 1 Mar 2011 20:08:19 +0530 Subject: arm: omap: usb: Invoke usbhs core device initialization The usbhs intialization is invoked by all omap3 and omap4 variant board files. Signed-off-by: Keshava Munegowda Signed-off-by: Felipe Balbi --- arch/arm/mach-omap2/board-3430sdp.c | 2 +- arch/arm/mach-omap2/board-3630sdp.c | 2 +- arch/arm/mach-omap2/board-4430sdp.c | 2 +- arch/arm/mach-omap2/board-am3517crane.c | 2 +- arch/arm/mach-omap2/board-am3517evm.c | 2 +- arch/arm/mach-omap2/board-cm-t35.c | 2 +- arch/arm/mach-omap2/board-cm-t3517.c | 2 +- arch/arm/mach-omap2/board-devkit8000.c | 2 +- arch/arm/mach-omap2/board-igep0020.c | 2 +- arch/arm/mach-omap2/board-igep0030.c | 2 +- arch/arm/mach-omap2/board-omap3beagle.c | 2 +- arch/arm/mach-omap2/board-omap3evm.c | 2 +- arch/arm/mach-omap2/board-omap3pandora.c | 2 +- arch/arm/mach-omap2/board-omap3stalker.c | 2 +- arch/arm/mach-omap2/board-omap3touchbook.c | 2 +- arch/arm/mach-omap2/board-omap4panda.c | 2 +- arch/arm/mach-omap2/board-overo.c | 2 +- arch/arm/mach-omap2/board-zoom.c | 2 +- 18 files changed, 18 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index a991aeb5609..7542ba59f2b 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -816,7 +816,7 @@ static void __init omap_3430sdp_init(void) board_flash_init(sdp_flash_partitions, chip_sel_3430); sdp3430_display_init(); enable_board_wakeup_source(); - usb_ehci_init(&usbhs_bdata); + usbhs_init(&usbhs_bdata); } MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board") diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index 03fd8aca3cc..deed2db32c5 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -211,7 +211,7 @@ static void __init omap_sdp_init(void) board_smc91x_init(); board_flash_init(sdp_flash_partitions, chip_sel_sdp); enable_board_wakeup_source(); - usb_ehci_init(&usbhs_bdata); + usbhs_init(&usbhs_bdata); } MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board") diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 0e1609d3fa8..1230121960d 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -584,7 +584,7 @@ static void __init omap_4430sdp_init(void) else gpio_direction_output(OMAP4SDP_MDM_PWR_EN_GPIO, 1); - usb_ehci_init(&usbhs_bdata); + usbhs_init(&usbhs_bdata); usb_musb_init(&musb_board_data); status = omap_ethernet_init(); diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index 1b825a00c5b..e3a194f6b13 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -103,7 +103,7 @@ static void __init am3517_crane_init(void) return; } - usb_ehci_init(&usbhs_bdata); + usbhs_init(&usbhs_bdata); } MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD") diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index f5bc1c6ccf5..913538ad17d 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -502,7 +502,7 @@ static void __init am3517_evm_init(void) /* Configure GPIO for EHCI port */ omap_mux_init_gpio(57, OMAP_PIN_OUTPUT); - usb_ehci_init(&usbhs_bdata); + usbhs_init(&usbhs_bdata); am3517_evm_hecc_init(&am3517_evm_hecc_pdata); /* DSS */ am3517_evm_display_init(); diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index c79aa9be72f..9be7289cbb5 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -810,7 +810,7 @@ static void __init cm_t35_init(void) cm_t35_init_display(); usb_musb_init(&musb_board_data); - usb_ehci_init(&usbhs_bdata); + usbhs_init(&usbhs_bdata); } MACHINE_START(CM_T35, "Compulab CM-T35") diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index 8288a0b9159..8e18dc76b11 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -192,7 +192,7 @@ static int cm_t3517_init_usbh(void) msleep(1); } - usb_ehci_init(&cm_t3517_ehci_pdata); + usbhs_init(&cm_t3517_ehci_pdata); return 0; } diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index e0131dda579..bc0141b9869 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -803,7 +803,7 @@ static void __init devkit8000_init(void) devkit8000_ads7846_init(); usb_musb_init(&musb_board_data); - usb_ehci_init(&usbhs_bdata); + usbhs_init(&usbhs_bdata); devkit8000_flash_init(); /* Ensure SDRC pins are mux'd for self-refresh */ diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index a9d7d1dc63a..f9f53441931 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -699,7 +699,7 @@ static void __init igep2_init(void) platform_add_devices(igep2_devices, ARRAY_SIZE(igep2_devices)); omap_serial_init(); usb_musb_init(&musb_board_data); - usb_ehci_init(&usbhs_bdata); + usbhs_init(&usbhs_bdata); igep2_flash_init(); igep2_leds_init(); diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c index 1b441eafdba..579fc2d2525 100644 --- a/arch/arm/mach-omap2/board-igep0030.c +++ b/arch/arm/mach-omap2/board-igep0030.c @@ -435,7 +435,7 @@ static void __init igep3_init(void) platform_add_devices(igep3_devices, ARRAY_SIZE(igep3_devices)); omap_serial_init(); usb_musb_init(&musb_board_data); - usb_ehci_init(&usbhs_bdata); + usbhs_init(&usbhs_bdata); igep3_flash_init(); igep3_leds_init(); diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index b84a6418ec1..f0963b6e462 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -625,7 +625,7 @@ static void __init omap3_beagle_init(void) gpio_direction_output(170, true); usb_musb_init(&musb_board_data); - usb_ehci_init(&usbhs_bdata); + usbhs_init(&usbhs_bdata); omap3beagle_flash_init(); /* Ensure SDRC pins are mux'd for self-refresh */ diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index ed5e4118147..38a2d91790c 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -711,7 +711,7 @@ static void __init omap3_evm_init(void) usbhs_bdata.reset_gpio_port[1] = 135; } usb_musb_init(&musb_board_data); - usb_ehci_init(&usbhs_bdata); + usbhs_init(&usbhs_bdata); ads7846_dev_init(); omap3evm_init_smsc911x(); omap3_evm_display_init(); diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 241e632a466..aa05f2e46a6 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -716,7 +716,7 @@ static void __init omap3pandora_init(void) spi_register_board_info(omap3pandora_spi_board_info, ARRAY_SIZE(omap3pandora_spi_board_info)); omap3pandora_ads7846_init(); - usb_ehci_init(&usbhs_bdata); + usbhs_init(&usbhs_bdata); usb_musb_init(&musb_board_data); gpmc_nand_init(&pandora_nand_data); diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index eaad924b624..f6c87787cd4 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -649,7 +649,7 @@ static void __init omap3_stalker_init(void) omap_serial_init(); usb_musb_init(&musb_board_data); - usb_ehci_init(&usbhs_bdata); + usbhs_init(&usbhs_bdata); ads7846_dev_init(); omap_mux_init_gpio(21, OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 4e3a1ae2ac9..84cfddb19a7 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -527,7 +527,7 @@ static void __init omap3_touchbook_init(void) ARRAY_SIZE(omap3_ads7846_spi_board_info)); omap3_ads7846_init(); usb_musb_init(&musb_board_data); - usb_ehci_init(&usbhs_bdata); + usbhs_init(&usbhs_bdata); omap3touchbook_flash_init(); /* Ensure SDRC pins are mux'd for self-refresh */ diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index b88c1909434..ed61c1f5d5e 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -128,7 +128,7 @@ static void __init omap4_ehci_init(void) gpio_set_value(GPIO_HUB_NRESET, 0); gpio_set_value(GPIO_HUB_NRESET, 1); - usb_ehci_init(&usbhs_bdata); + usbhs_init(&usbhs_bdata); /* enable power to hub */ gpio_set_value(GPIO_HUB_POWER, 1); diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index f78b74c369d..08770ccec0f 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -454,7 +454,7 @@ static void __init overo_init(void) omap_serial_init(); overo_flash_init(); usb_musb_init(&musb_board_data); - usb_ehci_init(&usbhs_bdata); + usbhs_init(&usbhs_bdata); overo_ads7846_init(); overo_init_smsc911x(); diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c index 19b99128df7..1dd195afa39 100644 --- a/arch/arm/mach-omap2/board-zoom.c +++ b/arch/arm/mach-omap2/board-zoom.c @@ -123,7 +123,7 @@ static void __init omap_zoom_init(void) } else if (machine_is_omap_zoom3()) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); omap_mux_init_gpio(ZOOM3_EHCI_RESET_GPIO, OMAP_PIN_OUTPUT); - usb_ehci_init(&usbhs_bdata); + usbhs_init(&usbhs_bdata); } board_nand_init(zoom_nand_partitions, -- cgit v1.2.3-18-g5258 From 3b68ae73d8afa925807ebaae7eb14e2afd43f5b5 Mon Sep 17 00:00:00 2001 From: Keshava Munegowda Date: Tue, 1 Mar 2011 20:08:20 +0530 Subject: arm: omap: usb: cleanup ehci and ohci resources and devices The prototype and defination of functions usb_ehci_init and usb_ohci_init are removed. The ehci and ohci devices are removed since usbhs device contains both ehci and ohci details. Signed-off-by: Keshava Munegowda Signed-off-by: Felipe Balbi --- arch/arm/mach-omap2/usb-host.c | 176 +++++----------------------------- arch/arm/plat-omap/include/plat/usb.h | 4 - 2 files changed, 26 insertions(+), 154 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index ab063820874..89ae29847c5 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -33,34 +33,46 @@ #ifdef CONFIG_MFD_OMAP_USB_HOST -static struct resource ehci_resources[] = { +#define OMAP_USBHS_DEVICE "usbhs-omap" + +static struct resource usbhs_resources[] = { + { + .name = "uhh", + .flags = IORESOURCE_MEM, + }, { + .name = "tll", .flags = IORESOURCE_MEM, }, { + .name = "ehci", .flags = IORESOURCE_MEM, }, { + .name = "ehci-irq", + .flags = IORESOURCE_IRQ, + }, + { + .name = "ohci", .flags = IORESOURCE_MEM, }, - { /* general IRQ */ - .flags = IORESOURCE_IRQ, + { + .name = "ohci-irq", + .flags = IORESOURCE_IRQ, } }; -static u64 ehci_dmamask = ~(u32)0; -static struct platform_device ehci_device = { - .name = "ehci-omap", - .id = 0, - .dev = { - .dma_mask = &ehci_dmamask, - .coherent_dma_mask = 0xffffffff, - .platform_data = NULL, - }, - .num_resources = ARRAY_SIZE(ehci_resources), - .resource = ehci_resources, +static struct platform_device usbhs_device = { + .name = OMAP_USBHS_DEVICE, + .id = 0, + .num_resources = ARRAY_SIZE(usbhs_resources), + .resource = usbhs_resources, }; +static struct usbhs_omap_platform_data usbhs_data; +static struct ehci_hcd_omap_platform_data ehci_data; +static struct ohci_hcd_omap_platform_data ohci_data; + /* MUX settings for EHCI pins */ /* * setup_ehci_io_mux - initialize IO pad mux for USBHOST @@ -326,81 +338,6 @@ static void setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode) } } -void __init usb_ehci_init(const struct usbhs_omap_board_data *pdata) -{ - platform_device_add_data(&ehci_device, pdata, sizeof(*pdata)); - - /* Setup Pin IO MUX for EHCI */ - if (cpu_is_omap34xx()) { - ehci_resources[0].start = OMAP34XX_EHCI_BASE; - ehci_resources[0].end = OMAP34XX_EHCI_BASE + SZ_1K - 1; - ehci_resources[1].start = OMAP34XX_UHH_CONFIG_BASE; - ehci_resources[1].end = OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1; - ehci_resources[2].start = OMAP34XX_USBTLL_BASE; - ehci_resources[2].end = OMAP34XX_USBTLL_BASE + SZ_4K - 1; - ehci_resources[3].start = INT_34XX_EHCI_IRQ; - setup_ehci_io_mux(pdata->port_mode); - } else if (cpu_is_omap44xx()) { - ehci_resources[0].start = OMAP44XX_HSUSB_EHCI_BASE; - ehci_resources[0].end = OMAP44XX_HSUSB_EHCI_BASE + SZ_1K - 1; - ehci_resources[1].start = OMAP44XX_UHH_CONFIG_BASE; - ehci_resources[1].end = OMAP44XX_UHH_CONFIG_BASE + SZ_2K - 1; - ehci_resources[2].start = OMAP44XX_USBTLL_BASE; - ehci_resources[2].end = OMAP44XX_USBTLL_BASE + SZ_4K - 1; - ehci_resources[3].start = OMAP44XX_IRQ_EHCI; - setup_4430ehci_io_mux(pdata->port_mode); - } - - ehci_resources[0].name = "ehci"; - ehci_resources[1].name = "uhh"; - ehci_resources[2].name = "tll"; - ehci_resources[3].name = "irq"; - - if (platform_device_register(&ehci_device) < 0) { - printk(KERN_ERR "Unable to register HS-USB (EHCI) device\n"); - return; - } -} - -static struct resource ohci_resources[] = { - { - .name = "ohci", - .start = OMAP34XX_OHCI_BASE, - .end = OMAP34XX_OHCI_BASE + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "uhh", - .start = OMAP34XX_UHH_CONFIG_BASE, - .end = OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "tll", - .start = OMAP34XX_USBTLL_BASE, - .end = OMAP34XX_USBTLL_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - { /* general IRQ */ - .name = "irq", - .start = INT_34XX_OHCI_IRQ, - .flags = IORESOURCE_IRQ, - } -}; - -static u64 ohci_dmamask = DMA_BIT_MASK(32); - -static struct platform_device ohci_device = { - .name = "ohci-omap3", - .id = 0, - .dev = { - .dma_mask = &ohci_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(ohci_resources), - .resource = ohci_resources, -}; - static void setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) { switch (port_mode[0]) { @@ -569,60 +506,6 @@ static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) } } -void __init usb_ohci_init(const struct usbhs_omap_board_data *pdata) -{ - platform_device_add_data(&ohci_device, pdata, sizeof(*pdata)); - - /* Setup Pin IO MUX for OHCI */ - if (cpu_is_omap34xx()) - setup_ohci_io_mux(pdata->port_mode); - - if (platform_device_register(&ohci_device) < 0) { - pr_err("Unable to register FS-USB (OHCI) device\n"); - return; - } -} - -#define OMAP_USBHS_DEVICE "usbhs-omap" - -static struct resource usbhs_resources[] = { - { - .name = "uhh", - .flags = IORESOURCE_MEM, - }, - { - .name = "tll", - .flags = IORESOURCE_MEM, - }, - { - .name = "ehci", - .flags = IORESOURCE_MEM, - }, - { - .name = "ehci-irq", - .flags = IORESOURCE_IRQ, - }, - { - .name = "ohci", - .flags = IORESOURCE_MEM, - }, - { - .name = "ohci-irq", - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device usbhs_device = { - .name = OMAP_USBHS_DEVICE, - .id = 0, - .num_resources = ARRAY_SIZE(usbhs_resources), - .resource = usbhs_resources, -}; - -static struct usbhs_omap_platform_data usbhs_data; -static struct ehci_hcd_omap_platform_data ehci_data; -static struct ohci_hcd_omap_platform_data ohci_data; - void __init usbhs_init(const struct usbhs_omap_board_data *pdata) { int i; @@ -686,13 +569,6 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata) { } -void __init usb_ohci_init(const struct usbhs_omap_board_data *pdata) -{ -} - -void __init usb_ehci_init(const struct usbhs_omap_board_data *pdata) -{ -} #endif diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index 4c8bdb835fa..fe449f1a1c1 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -98,10 +98,6 @@ enum musb_interface {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI}; extern void usb_musb_init(struct omap_musb_board_data *board_data); -extern void usb_ehci_init(const struct usbhs_omap_board_data *pdata); - -extern void usb_ohci_init(const struct usbhs_omap_board_data *pdata); - extern void usbhs_init(const struct usbhs_omap_board_data *pdata); extern int omap_usbhs_enable(struct device *dev); -- cgit v1.2.3-18-g5258 From 53689ac1b677532be666a779e24b0ac9bd266354 Mon Sep 17 00:00:00 2001 From: Keshava Munegowda Date: Tue, 1 Mar 2011 20:08:22 +0530 Subject: arm: omap: usb: clock entries for omap3 and omap4 The devices of clocks are set to usbhs, so that only usbhs common driver can invoke these clocks. The dummy per port clocks are added to omap3 clock data base. This helps to invoke common clock get APIs for omap3 and omap4. Signed-off-by: Keshava Munegowda Signed-off-by: Felipe Balbi --- arch/arm/mach-omap2/clock3xxx_data.c | 19 ++++++++++++++----- arch/arm/mach-omap2/clock44xx_data.c | 10 +++++----- 2 files changed, 19 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 403a4a1d3f9..fbb1e30a73d 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3286,7 +3286,7 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "cpefuse_fck", &cpefuse_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "ts_fck", &ts_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("ehci-omap.0", "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK("usbhs-omap.0", "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK("omap-mcbsp.1", "prcm_fck", &core_96m_fck, CK_3XXX), CLK("omap-mcbsp.5", "prcm_fck", &core_96m_fck, CK_3XXX), CLK(NULL, "core_96m_fck", &core_96m_fck, CK_3XXX), @@ -3322,7 +3322,7 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "pka_ick", &pka_ick, CK_34XX | CK_36XX), CLK(NULL, "core_l4_ick", &core_l4_ick, CK_3XXX), CLK(NULL, "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("ehci-omap.0", "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK("usbhs-omap.0", "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK("mmci-omap-hs.2", "ick", &mmchs3_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "icr_ick", &icr_ick, CK_34XX | CK_36XX), CLK("omap-aes", "ick", &aes2_ick, CK_34XX | CK_36XX), @@ -3368,11 +3368,20 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "cam_ick", &cam_ick, CK_34XX | CK_36XX), CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_34XX | CK_36XX), CLK(NULL, "usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("ehci-omap.0", "hs_fck", &usbhost_120m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK("usbhs-omap.0", "hs_fck", &usbhost_120m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("ehci-omap.0", "fs_fck", &usbhost_48m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK("usbhs-omap.0", "fs_fck", &usbhost_48m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "usbhost_ick", &usbhost_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("ehci-omap.0", "usbhost_ick", &usbhost_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK("usbhs-omap.0", "usbhost_ick", &usbhost_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK("usbhs-omap.0", "utmi_p1_gfclk", &dummy_ck, CK_3XXX), + CLK("usbhs-omap.0", "utmi_p2_gfclk", &dummy_ck, CK_3XXX), + CLK("usbhs-omap.0", "xclk60mhsp1_ck", &dummy_ck, CK_3XXX), + CLK("usbhs-omap.0", "xclk60mhsp2_ck", &dummy_ck, CK_3XXX), + CLK("usbhs-omap.0", "usb_host_hs_utmi_p1_clk", &dummy_ck, CK_3XXX), + CLK("usbhs-omap.0", "usb_host_hs_utmi_p2_clk", &dummy_ck, CK_3XXX), + CLK("usbhs-omap.0", "usb_tll_hs_usb_ch0_clk", &dummy_ck, CK_3XXX), + CLK("usbhs-omap.0", "usb_tll_hs_usb_ch1_clk", &dummy_ck, CK_3XXX), + CLK("usbhs-omap.0", "init_60m_fclk", &dummy_ck, CK_3XXX), CLK(NULL, "usim_fck", &usim_fck, CK_3430ES2PLUS | CK_36XX), CLK(NULL, "gpt1_fck", &gpt1_fck, CK_3XXX), CLK(NULL, "wkup_32k_fck", &wkup_32k_fck, CK_3XXX), diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index de9ec8ddd2a..46fd3f674ca 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -3197,7 +3197,7 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "uart3_fck", &uart3_fck, CK_443X), CLK(NULL, "uart4_fck", &uart4_fck, CK_443X), CLK(NULL, "usb_host_fs_fck", &usb_host_fs_fck, CK_443X), - CLK("ehci-omap.0", "fs_fck", &usb_host_fs_fck, CK_443X), + CLK("usbhs-omap.0", "fs_fck", &usb_host_fs_fck, CK_443X), CLK(NULL, "utmi_p1_gfclk", &utmi_p1_gfclk, CK_443X), CLK(NULL, "usb_host_hs_utmi_p1_clk", &usb_host_hs_utmi_p1_clk, CK_443X), CLK(NULL, "utmi_p2_gfclk", &utmi_p2_gfclk, CK_443X), @@ -3209,8 +3209,8 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "usb_host_hs_hsic480m_p2_clk", &usb_host_hs_hsic480m_p2_clk, CK_443X), CLK(NULL, "usb_host_hs_func48mclk", &usb_host_hs_func48mclk, CK_443X), CLK(NULL, "usb_host_hs_fck", &usb_host_hs_fck, CK_443X), - CLK("ehci-omap.0", "hs_fck", &usb_host_hs_fck, CK_443X), - CLK("ehci-omap.0", "usbhost_ick", &dummy_ck, CK_443X), + CLK("usbhs-omap.0", "hs_fck", &usb_host_hs_fck, CK_443X), + CLK("usbhs-omap.0", "usbhost_ick", &dummy_ck, CK_443X), CLK(NULL, "otg_60m_gfclk", &otg_60m_gfclk, CK_443X), CLK(NULL, "usb_otg_hs_xclk", &usb_otg_hs_xclk, CK_443X), CLK("musb-omap2430", "ick", &usb_otg_hs_ick, CK_443X), @@ -3219,8 +3219,8 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "usb_tll_hs_usb_ch0_clk", &usb_tll_hs_usb_ch0_clk, CK_443X), CLK(NULL, "usb_tll_hs_usb_ch1_clk", &usb_tll_hs_usb_ch1_clk, CK_443X), CLK(NULL, "usb_tll_hs_ick", &usb_tll_hs_ick, CK_443X), - CLK("ehci-omap.0", "usbtll_ick", &usb_tll_hs_ick, CK_443X), - CLK("ehci-omap.0", "usbtll_fck", &dummy_ck, CK_443X), + CLK("usbhs-omap.0", "usbtll_ick", &usb_tll_hs_ick, CK_443X), + CLK("usbhs-omap.0", "usbtll_fck", &dummy_ck, CK_443X), CLK(NULL, "usim_ck", &usim_ck, CK_443X), CLK(NULL, "usim_fclk", &usim_fclk, CK_443X), CLK(NULL, "usim_fck", &usim_fck, CK_443X), -- cgit v1.2.3-18-g5258 From e08016d0f4fcfe038a402071ada3073c6ca8d62d Mon Sep 17 00:00:00 2001 From: Anand Gadiyar Date: Tue, 1 Mar 2011 13:12:55 -0800 Subject: omap: mmc: split out init for 2420 The MMC controller on the OMAP2420 is different from those on the OMAP2430, OMAP3 and OMAP4 families - all of the latter are identical. The one on the OMAP2420 is closer to that on OMAP1 chips. Currently, the n8x0 is the only OMAP2420 platform supported in mainline which registers the MMC controller. Upcoming changes to register the controllers using hwmod data are potentially invasive. To reduce the risk, separate out the 2420 controller registration from the common init function and update its only user. Also seperating out mux settings for OMAP2420. Signed-off-by: Anand Gadiyar Signed-off-by: Kishore Kadiyala Cc: Tony Lindgren Cc: Madhusudhan Chikkature Cc: Chris Ball Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-n8x0.c | 2 +- arch/arm/mach-omap2/devices.c | 88 ++++++++++++++++++++++------------- arch/arm/plat-omap/include/plat/mmc.h | 4 ++ 3 files changed, 61 insertions(+), 33 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index b36cbd21e2d..e710cd9e079 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -536,7 +536,7 @@ static void __init n8x0_mmc_init(void) } mmc_data[0] = &mmc1_data; - omap2_init_mmc(mmc_data, OMAP24XX_NR_MMC); + omap242x_init_mmc(mmc_data); } #else diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 9ee876fd367..100bb425e9c 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -650,11 +650,10 @@ err1: static inline void omap_hsmmc_reset(void) {} #endif -#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \ - defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) +#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) -static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller, - int controller_nr) +static inline void omap242x_mmc_mux(struct omap_mmc_platform_data + *mmc_controller) { if ((mmc_controller->slots[0].switch_pin > 0) && \ (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES)) @@ -665,33 +664,61 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller, omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp, OMAP_PIN_INPUT_PULLUP); - if (cpu_is_omap2420() && controller_nr == 0) { - omap_mux_init_signal("sdmmc_cmd", 0); - omap_mux_init_signal("sdmmc_clki", 0); - omap_mux_init_signal("sdmmc_clko", 0); - omap_mux_init_signal("sdmmc_dat0", 0); - omap_mux_init_signal("sdmmc_dat_dir0", 0); - omap_mux_init_signal("sdmmc_cmd_dir", 0); - if (mmc_controller->slots[0].caps & MMC_CAP_4_BIT_DATA) { - omap_mux_init_signal("sdmmc_dat1", 0); - omap_mux_init_signal("sdmmc_dat2", 0); - omap_mux_init_signal("sdmmc_dat3", 0); - omap_mux_init_signal("sdmmc_dat_dir1", 0); - omap_mux_init_signal("sdmmc_dat_dir2", 0); - omap_mux_init_signal("sdmmc_dat_dir3", 0); - } + omap_mux_init_signal("sdmmc_cmd", 0); + omap_mux_init_signal("sdmmc_clki", 0); + omap_mux_init_signal("sdmmc_clko", 0); + omap_mux_init_signal("sdmmc_dat0", 0); + omap_mux_init_signal("sdmmc_dat_dir0", 0); + omap_mux_init_signal("sdmmc_cmd_dir", 0); + if (mmc_controller->slots[0].caps & MMC_CAP_4_BIT_DATA) { + omap_mux_init_signal("sdmmc_dat1", 0); + omap_mux_init_signal("sdmmc_dat2", 0); + omap_mux_init_signal("sdmmc_dat3", 0); + omap_mux_init_signal("sdmmc_dat_dir1", 0); + omap_mux_init_signal("sdmmc_dat_dir2", 0); + omap_mux_init_signal("sdmmc_dat_dir3", 0); + } - /* - * Use internal loop-back in MMC/SDIO Module Input Clock - * selection - */ - if (mmc_controller->slots[0].internal_clock) { - u32 v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - v |= (1 << 24); - omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0); - } + /* + * Use internal loop-back in MMC/SDIO Module Input Clock + * selection + */ + if (mmc_controller->slots[0].internal_clock) { + u32 v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); + v |= (1 << 24); + omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0); + } +} + +void __init omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data) +{ + char *name = "mmci-omap"; + + if (!mmc_data[0]) { + pr_err("%s fails: Incomplete platform data\n", __func__); + return; } + omap242x_mmc_mux(mmc_data[0]); + omap_mmc_add(name, 0, OMAP2_MMC1_BASE, OMAP2420_MMC_SIZE, + INT_24XX_MMC_IRQ, mmc_data[0]); +} + +#endif + +#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) + +static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller, + int controller_nr) +{ + if ((mmc_controller->slots[0].switch_pin > 0) && \ + (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES)) + omap_mux_init_gpio(mmc_controller->slots[0].switch_pin, + OMAP_PIN_INPUT_PULLUP); + if ((mmc_controller->slots[0].gpio_wp > 0) && \ + (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES)) + omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp, + OMAP_PIN_INPUT_PULLUP); if (cpu_is_omap34xx()) { if (controller_nr == 0) { omap_mux_init_signal("sdmmc1_clk", @@ -808,10 +835,7 @@ void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data, continue; } - if (cpu_is_omap2420()) { - size = OMAP2420_MMC_SIZE; - name = "mmci-omap"; - } else if (cpu_is_omap44xx()) { + if (cpu_is_omap44xx()) { if (i < 3) irq += OMAP44XX_IRQ_GIC_START; size = OMAP4_HSMMC_SIZE; diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h index f57f36abb07..e5de5d452b3 100644 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ b/arch/arm/plat-omap/include/plat/mmc.h @@ -159,6 +159,7 @@ extern void omap_mmc_notify_cover_event(struct device *dev, int slot, defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, int nr_controllers); +void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data); void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data, int nr_controllers); int omap_mmc_add(const char *name, int id, unsigned long base, @@ -169,6 +170,9 @@ static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, int nr_controllers) { } +static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data) +{ +} static inline void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data, int nr_controllers) { -- cgit v1.2.3-18-g5258 From bce06f375644f8b28fbc1d261699fdfe459733ad Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 1 Mar 2011 13:12:55 -0800 Subject: OMAP2430: hwmod data: Add HSMMC Update the omap2430 hwmod data with the HSMMC info. Signed-off-by: Paul Walmsley Signed-off-by: Kevin Hilman Signed-off-by: Rajendra Nayak Cc: Benoit Cousson Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod_2430_data.c | 148 +++++++++++++++++++++++++++++ 1 file changed, 148 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index b46a54ce1a4..0d239e3a980 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -55,6 +55,8 @@ static struct omap_hwmod omap2430_dma_system_hwmod; static struct omap_hwmod omap2430_mcspi1_hwmod; static struct omap_hwmod omap2430_mcspi2_hwmod; static struct omap_hwmod omap2430_mcspi3_hwmod; +static struct omap_hwmod omap2430_mmc1_hwmod; +static struct omap_hwmod omap2430_mmc2_hwmod; /* L3 -> L4_CORE interface */ static struct omap_hwmod_ocp_if omap2430_l3_main__l4_core = { @@ -251,6 +253,42 @@ static struct omap_hwmod_ocp_if *omap2430_usbhsotg_slaves[] = { &omap2430_l4_core__usbhsotg, }; +/* L4 CORE -> MMC1 interface */ +static struct omap_hwmod_addr_space omap2430_mmc1_addr_space[] = { + { + .pa_start = 0x4809c000, + .pa_end = 0x4809c1ff, + .flags = ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap2430_l4_core__mmc1 = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_mmc1_hwmod, + .clk = "mmchs1_ick", + .addr = omap2430_mmc1_addr_space, + .addr_cnt = ARRAY_SIZE(omap2430_mmc1_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* L4 CORE -> MMC2 interface */ +static struct omap_hwmod_addr_space omap2430_mmc2_addr_space[] = { + { + .pa_start = 0x480b4000, + .pa_end = 0x480b41ff, + .flags = ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap2430_l4_core__mmc2 = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_mmc2_hwmod, + .addr = omap2430_mmc2_addr_space, + .clk = "mmchs2_ick", + .addr_cnt = ARRAY_SIZE(omap2430_mmc2_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* Slave interfaces on the L4_CORE interconnect */ static struct omap_hwmod_ocp_if *omap2430_l4_core_slaves[] = { &omap2430_l3_main__l4_core, @@ -259,6 +297,8 @@ static struct omap_hwmod_ocp_if *omap2430_l4_core_slaves[] = { /* Master interfaces on the L4_CORE interconnect */ static struct omap_hwmod_ocp_if *omap2430_l4_core_masters[] = { &omap2430_l4_core__l4_wkup, + &omap2430_l4_core__mmc1, + &omap2430_l4_core__mmc2, }; /* L4 CORE */ @@ -2127,6 +2167,112 @@ static struct omap_hwmod omap2430_usbhsotg_hwmod = { +/* MMC/SD/SDIO common */ + +static struct omap_hwmod_class_sysconfig omap2430_mmc_sysc = { + .rev_offs = 0x1fc, + .sysc_offs = 0x10, + .syss_offs = 0x14, + .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2430_mmc_class = { + .name = "mmc", + .sysc = &omap2430_mmc_sysc, +}; + +/* MMC/SD/SDIO1 */ + +static struct omap_hwmod_irq_info omap2430_mmc1_mpu_irqs[] = { + { .irq = 83 }, +}; + +static struct omap_hwmod_dma_info omap2430_mmc1_sdma_reqs[] = { + { .name = "tx", .dma_req = 61 }, /* DMA_MMC1_TX */ + { .name = "rx", .dma_req = 62 }, /* DMA_MMC1_RX */ +}; + +static struct omap_hwmod_opt_clk omap2430_mmc1_opt_clks[] = { + { .role = "dbck", .clk = "mmchsdb1_fck" }, +}; + +static struct omap_hwmod_ocp_if *omap2430_mmc1_slaves[] = { + &omap2430_l4_core__mmc1, +}; + +static struct omap_hwmod omap2430_mmc1_hwmod = { + .name = "mmc1", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, + .mpu_irqs = omap2430_mmc1_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2430_mmc1_mpu_irqs), + .sdma_reqs = omap2430_mmc1_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap2430_mmc1_sdma_reqs), + .opt_clks = omap2430_mmc1_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(omap2430_mmc1_opt_clks), + .main_clk = "mmchs1_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 2, + .module_bit = OMAP2430_EN_MMCHS1_SHIFT, + .idlest_reg_id = 2, + .idlest_idle_bit = OMAP2430_ST_MMCHS1_SHIFT, + }, + }, + .slaves = omap2430_mmc1_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_mmc1_slaves), + .class = &omap2430_mmc_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), +}; + +/* MMC/SD/SDIO2 */ + +static struct omap_hwmod_irq_info omap2430_mmc2_mpu_irqs[] = { + { .irq = 86 }, +}; + +static struct omap_hwmod_dma_info omap2430_mmc2_sdma_reqs[] = { + { .name = "tx", .dma_req = 47 }, /* DMA_MMC2_TX */ + { .name = "rx", .dma_req = 48 }, /* DMA_MMC2_RX */ +}; + +static struct omap_hwmod_opt_clk omap2430_mmc2_opt_clks[] = { + { .role = "dbck", .clk = "mmchsdb2_fck" }, +}; + +static struct omap_hwmod_ocp_if *omap2430_mmc2_slaves[] = { + &omap2430_l4_core__mmc2, +}; + +static struct omap_hwmod omap2430_mmc2_hwmod = { + .name = "mmc2", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, + .mpu_irqs = omap2430_mmc2_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2430_mmc2_mpu_irqs), + .sdma_reqs = omap2430_mmc2_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap2430_mmc2_sdma_reqs), + .opt_clks = omap2430_mmc2_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(omap2430_mmc2_opt_clks), + .main_clk = "mmchs2_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 2, + .module_bit = OMAP2430_EN_MMCHS2_SHIFT, + .idlest_reg_id = 2, + .idlest_idle_bit = OMAP2430_ST_MMCHS2_SHIFT, + }, + }, + .slaves = omap2430_mmc2_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_mmc2_slaves), + .class = &omap2430_mmc_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), +}; + static __initdata struct omap_hwmod *omap2430_hwmods[] = { &omap2430_l3_main_hwmod, &omap2430_l4_core_hwmod, @@ -2159,6 +2305,8 @@ static __initdata struct omap_hwmod *omap2430_hwmods[] = { /* i2c class */ &omap2430_i2c1_hwmod, &omap2430_i2c2_hwmod, + &omap2430_mmc1_hwmod, + &omap2430_mmc2_hwmod, /* gpio class */ &omap2430_gpio1_hwmod, -- cgit v1.2.3-18-g5258 From b163605e3f2051e0cbd378d46a91cab2563b7ebf Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 1 Mar 2011 13:12:56 -0800 Subject: OMAP3: hwmod data: Add HSMMC Update the omap3 hwmod data with the HSMMC info. Signed-off-by: Paul Walmsley Signed-off-by: Kevin Hilman Signed-off-by: Rajendra Nayak Signed-off-by: Kishore Kadiyala Cc: Benoit Cousson Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 209 +++++++++++++++++++++++++++++ arch/arm/mach-omap2/prcm-common.h | 4 + 2 files changed, 213 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index fc1b2b963bb..207ccfbac2e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -69,6 +69,9 @@ static struct omap_hwmod omap34xx_mcspi1; static struct omap_hwmod omap34xx_mcspi2; static struct omap_hwmod omap34xx_mcspi3; static struct omap_hwmod omap34xx_mcspi4; +static struct omap_hwmod omap3xxx_mmc1_hwmod; +static struct omap_hwmod omap3xxx_mmc2_hwmod; +static struct omap_hwmod omap3xxx_mmc3_hwmod; static struct omap_hwmod am35xx_usbhsotg_hwmod; static struct omap_hwmod omap3xxx_dma_system_hwmod; @@ -159,6 +162,63 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* L4 CORE -> MMC1 interface */ +static struct omap_hwmod_addr_space omap3xxx_mmc1_addr_space[] = { + { + .pa_start = 0x4809c000, + .pa_end = 0x4809c1ff, + .flags = ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap3xxx_l4_core__mmc1 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_mmc1_hwmod, + .clk = "mmchs1_ick", + .addr = omap3xxx_mmc1_addr_space, + .addr_cnt = ARRAY_SIZE(omap3xxx_mmc1_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, + .flags = OMAP_FIREWALL_L4 +}; + +/* L4 CORE -> MMC2 interface */ +static struct omap_hwmod_addr_space omap3xxx_mmc2_addr_space[] = { + { + .pa_start = 0x480b4000, + .pa_end = 0x480b41ff, + .flags = ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap3xxx_l4_core__mmc2 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_mmc2_hwmod, + .clk = "mmchs2_ick", + .addr = omap3xxx_mmc2_addr_space, + .addr_cnt = ARRAY_SIZE(omap3xxx_mmc2_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, + .flags = OMAP_FIREWALL_L4 +}; + +/* L4 CORE -> MMC3 interface */ +static struct omap_hwmod_addr_space omap3xxx_mmc3_addr_space[] = { + { + .pa_start = 0x480ad000, + .pa_end = 0x480ad1ff, + .flags = ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap3xxx_l4_core__mmc3 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_mmc3_hwmod, + .clk = "mmchs3_ick", + .addr = omap3xxx_mmc3_addr_space, + .addr_cnt = ARRAY_SIZE(omap3xxx_mmc3_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, + .flags = OMAP_FIREWALL_L4 +}; + /* L4 CORE -> UART1 interface */ static struct omap_hwmod_addr_space omap3xxx_uart1_addr_space[] = { { @@ -2847,11 +2907,160 @@ static struct omap_hwmod am35xx_usbhsotg_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES3_1) }; +/* MMC/SD/SDIO common */ + +static struct omap_hwmod_class_sysconfig omap34xx_mmc_sysc = { + .rev_offs = 0x1fc, + .sysc_offs = 0x10, + .syss_offs = 0x14, + .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap34xx_mmc_class = { + .name = "mmc", + .sysc = &omap34xx_mmc_sysc, +}; + +/* MMC/SD/SDIO1 */ + +static struct omap_hwmod_irq_info omap34xx_mmc1_mpu_irqs[] = { + { .irq = 83, }, +}; + +static struct omap_hwmod_dma_info omap34xx_mmc1_sdma_reqs[] = { + { .name = "tx", .dma_req = 61, }, + { .name = "rx", .dma_req = 62, }, +}; + +static struct omap_hwmod_opt_clk omap34xx_mmc1_opt_clks[] = { + { .role = "dbck", .clk = "omap_32k_fck", }, +}; + +static struct omap_hwmod_ocp_if *omap3xxx_mmc1_slaves[] = { + &omap3xxx_l4_core__mmc1, +}; + +static struct omap_hwmod omap3xxx_mmc1_hwmod = { + .name = "mmc1", + .mpu_irqs = omap34xx_mmc1_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap34xx_mmc1_mpu_irqs), + .sdma_reqs = omap34xx_mmc1_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap34xx_mmc1_sdma_reqs), + .opt_clks = omap34xx_mmc1_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc1_opt_clks), + .main_clk = "mmchs1_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_MMC1_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_MMC1_SHIFT, + }, + }, + .slaves = omap3xxx_mmc1_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_mmc1_slaves), + .class = &omap34xx_mmc_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +/* MMC/SD/SDIO2 */ + +static struct omap_hwmod_irq_info omap34xx_mmc2_mpu_irqs[] = { + { .irq = INT_24XX_MMC2_IRQ, }, +}; + +static struct omap_hwmod_dma_info omap34xx_mmc2_sdma_reqs[] = { + { .name = "tx", .dma_req = 47, }, + { .name = "rx", .dma_req = 48, }, +}; + +static struct omap_hwmod_opt_clk omap34xx_mmc2_opt_clks[] = { + { .role = "dbck", .clk = "omap_32k_fck", }, +}; + +static struct omap_hwmod_ocp_if *omap3xxx_mmc2_slaves[] = { + &omap3xxx_l4_core__mmc2, +}; + +static struct omap_hwmod omap3xxx_mmc2_hwmod = { + .name = "mmc2", + .mpu_irqs = omap34xx_mmc2_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap34xx_mmc2_mpu_irqs), + .sdma_reqs = omap34xx_mmc2_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap34xx_mmc2_sdma_reqs), + .opt_clks = omap34xx_mmc2_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc2_opt_clks), + .main_clk = "mmchs2_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_MMC2_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_MMC2_SHIFT, + }, + }, + .slaves = omap3xxx_mmc2_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_mmc2_slaves), + .class = &omap34xx_mmc_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +/* MMC/SD/SDIO3 */ + +static struct omap_hwmod_irq_info omap34xx_mmc3_mpu_irqs[] = { + { .irq = 94, }, +}; + +static struct omap_hwmod_dma_info omap34xx_mmc3_sdma_reqs[] = { + { .name = "tx", .dma_req = 77, }, + { .name = "rx", .dma_req = 78, }, +}; + +static struct omap_hwmod_opt_clk omap34xx_mmc3_opt_clks[] = { + { .role = "dbck", .clk = "omap_32k_fck", }, +}; + +static struct omap_hwmod_ocp_if *omap3xxx_mmc3_slaves[] = { + &omap3xxx_l4_core__mmc3, +}; + +static struct omap_hwmod omap3xxx_mmc3_hwmod = { + .name = "mmc3", + .mpu_irqs = omap34xx_mmc3_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap34xx_mmc3_mpu_irqs), + .sdma_reqs = omap34xx_mmc3_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap34xx_mmc3_sdma_reqs), + .opt_clks = omap34xx_mmc3_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc3_opt_clks), + .main_clk = "mmchs3_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_MMC3_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_MMC3_SHIFT, + }, + }, + .slaves = omap3xxx_mmc3_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_mmc3_slaves), + .class = &omap34xx_mmc_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { &omap3xxx_l3_main_hwmod, &omap3xxx_l4_core_hwmod, &omap3xxx_l4_per_hwmod, &omap3xxx_l4_wkup_hwmod, + &omap3xxx_mmc1_hwmod, + &omap3xxx_mmc2_hwmod, + &omap3xxx_mmc3_hwmod, &omap3xxx_mpu_hwmod, &omap3xxx_iva_hwmod, diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index 87486f55978..098e65943a0 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -191,6 +191,8 @@ #define OMAP3430_AUTOIDLE_MASK (1 << 0) /* CM_FCLKEN1_CORE, CM_ICLKEN1_CORE, PM_WKEN1_CORE shared bits */ +#define OMAP3430_EN_MMC3_MASK (1 << 30) +#define OMAP3430_EN_MMC3_SHIFT 30 #define OMAP3430_EN_MMC2_MASK (1 << 25) #define OMAP3430_EN_MMC2_SHIFT 25 #define OMAP3430_EN_MMC1_MASK (1 << 24) @@ -231,6 +233,8 @@ #define OMAP3430_EN_HSOTGUSB_SHIFT 4 /* PM_WKST1_CORE, CM_IDLEST1_CORE shared bits */ +#define OMAP3430_ST_MMC3_SHIFT 30 +#define OMAP3430_ST_MMC3_MASK (1 << 30) #define OMAP3430_ST_MMC2_SHIFT 25 #define OMAP3430_ST_MMC2_MASK (1 << 25) #define OMAP3430_ST_MMC1_SHIFT 24 -- cgit v1.2.3-18-g5258 From 17203bdaf2fd0cda6ac941a7b3fb8416c57303c7 Mon Sep 17 00:00:00 2001 From: Anand Gadiyar Date: Tue, 1 Mar 2011 13:12:56 -0800 Subject: OMAP4: hwmod data: enable HSMMC Enabling hsmmc hwmod for OMAP4 Signed-off-by: Anand Gadiyar Signed-off-by: Kishore Kadiyala Acked-by: Benoit Cousson Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 2c5882792e0..12fcd0a0820 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -5077,11 +5077,11 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = { &omap44xx_mcspi4_hwmod, /* mmc class */ -/* &omap44xx_mmc1_hwmod, */ -/* &omap44xx_mmc2_hwmod, */ -/* &omap44xx_mmc3_hwmod, */ -/* &omap44xx_mmc4_hwmod, */ -/* &omap44xx_mmc5_hwmod, */ + &omap44xx_mmc1_hwmod, + &omap44xx_mmc2_hwmod, + &omap44xx_mmc3_hwmod, + &omap44xx_mmc4_hwmod, + &omap44xx_mmc5_hwmod, /* mpu class */ &omap44xx_mpu_hwmod, -- cgit v1.2.3-18-g5258 From 6ab8946f672497a55625d2106250d2923125fdfb Mon Sep 17 00:00:00 2001 From: Kishore Kadiyala Date: Tue, 1 Mar 2011 13:12:56 -0800 Subject: OMAP: hwmod data: Add dev_attr and use in the host driver Add a device attribute to hwmod data of omap2430, omap3, omap4. Currently the device attribute holds information regarding dual volt MMC card support by the controller which will be later passed to the host driver via platform data. Signed-off-by: Kevin Hilman Signed-off-by: Kishore Kadiyala Acked-by: Benoit Cousson Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod_2430_data.c | 6 ++++++ arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 6 ++++++ arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 8 ++++++++ arch/arm/plat-omap/include/plat/mmc.h | 9 +++++++++ 4 files changed, 29 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 0d239e3a980..ca25fa2af78 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include "omap_hwmod_common_data.h" @@ -2204,6 +2205,10 @@ static struct omap_hwmod_ocp_if *omap2430_mmc1_slaves[] = { &omap2430_l4_core__mmc1, }; +static struct omap_mmc_dev_attr mmc1_dev_attr = { + .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, +}; + static struct omap_hwmod omap2430_mmc1_hwmod = { .name = "mmc1", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, @@ -2223,6 +2228,7 @@ static struct omap_hwmod omap2430_mmc1_hwmod = { .idlest_idle_bit = OMAP2430_ST_MMCHS1_SHIFT, }, }, + .dev_attr = &mmc1_dev_attr, .slaves = omap2430_mmc1_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_mmc1_slaves), .class = &omap2430_mmc_class, diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 207ccfbac2e..5fdcc1e9d4a 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -2944,6 +2945,10 @@ static struct omap_hwmod_ocp_if *omap3xxx_mmc1_slaves[] = { &omap3xxx_l4_core__mmc1, }; +static struct omap_mmc_dev_attr mmc1_dev_attr = { + .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, +}; + static struct omap_hwmod omap3xxx_mmc1_hwmod = { .name = "mmc1", .mpu_irqs = omap34xx_mmc1_mpu_irqs, @@ -2962,6 +2967,7 @@ static struct omap_hwmod omap3xxx_mmc1_hwmod = { .idlest_idle_bit = OMAP3430_ST_MMC1_SHIFT, }, }, + .dev_attr = &mmc1_dev_attr, .slaves = omap3xxx_mmc1_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_mmc1_slaves), .class = &omap34xx_mmc_class, diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 12fcd0a0820..9398c2db725 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -25,6 +25,7 @@ #include #include #include +#include #include "omap_hwmod_common_data.h" @@ -3383,6 +3384,7 @@ static struct omap_hwmod_class omap44xx_mmc_hwmod_class = { }; /* mmc1 */ + static struct omap_hwmod_irq_info omap44xx_mmc1_irqs[] = { { .irq = 83 + OMAP44XX_IRQ_GIC_START }, }; @@ -3420,6 +3422,11 @@ static struct omap_hwmod_ocp_if *omap44xx_mmc1_slaves[] = { &omap44xx_l4_per__mmc1, }; +/* mmc1 dev_attr */ +static struct omap_mmc_dev_attr mmc1_dev_attr = { + .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, +}; + static struct omap_hwmod omap44xx_mmc1_hwmod = { .name = "mmc1", .class = &omap44xx_mmc_hwmod_class, @@ -3433,6 +3440,7 @@ static struct omap_hwmod omap44xx_mmc1_hwmod = { .clkctrl_reg = OMAP4430_CM_L3INIT_MMC1_CLKCTRL, }, }, + .dev_attr = &mmc1_dev_attr, .slaves = omap44xx_mmc1_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_mmc1_slaves), .masters = omap44xx_mmc1_masters, diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h index e5de5d452b3..a7afab09571 100644 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ b/arch/arm/plat-omap/include/plat/mmc.h @@ -43,6 +43,12 @@ #define OMAP_MMC_MAX_SLOTS 2 +#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(1) + +struct omap_mmc_dev_attr { + u8 flags; +}; + struct omap_mmc_platform_data { /* back-link to device */ struct device *dev; @@ -71,6 +77,9 @@ struct omap_mmc_platform_data { u64 dma_mask; + /* Integrating attributes from the omap_hwmod layer */ + u8 controller_flags; + /* Register offset deviation */ u16 reg_offset; -- cgit v1.2.3-18-g5258 From d8d0a61c658e252de3077f6076f13423642caf67 Mon Sep 17 00:00:00 2001 From: Kishore Kadiyala Date: Mon, 28 Feb 2011 20:48:03 +0530 Subject: OMAP: hsmmc: Move mux configuration to hsmmc.c Moving the definition of mux setting API from devices.c to hsmmc.c and renaming it from "omap2_mmc_mux" to "omap_hsmmc_mux". Also calling "omap_hsmmc_mux" from omap2_hsmmc_init. Signed-off-by: Kishore Kadiyala Cc: Chris Ball --- arch/arm/mach-omap2/devices.c | 83 ------------------------------------------ arch/arm/mach-omap2/hsmmc.c | 84 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 84 insertions(+), 83 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 100bb425e9c..2f4a598ba67 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -708,87 +708,6 @@ void __init omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data) #if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) -static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller, - int controller_nr) -{ - if ((mmc_controller->slots[0].switch_pin > 0) && \ - (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES)) - omap_mux_init_gpio(mmc_controller->slots[0].switch_pin, - OMAP_PIN_INPUT_PULLUP); - if ((mmc_controller->slots[0].gpio_wp > 0) && \ - (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES)) - omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp, - OMAP_PIN_INPUT_PULLUP); - if (cpu_is_omap34xx()) { - if (controller_nr == 0) { - omap_mux_init_signal("sdmmc1_clk", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc1_cmd", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc1_dat0", - OMAP_PIN_INPUT_PULLUP); - if (mmc_controller->slots[0].caps & - (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) { - omap_mux_init_signal("sdmmc1_dat1", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc1_dat2", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc1_dat3", - OMAP_PIN_INPUT_PULLUP); - } - if (mmc_controller->slots[0].caps & - MMC_CAP_8_BIT_DATA) { - omap_mux_init_signal("sdmmc1_dat4", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc1_dat5", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc1_dat6", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc1_dat7", - OMAP_PIN_INPUT_PULLUP); - } - } - if (controller_nr == 1) { - /* MMC2 */ - omap_mux_init_signal("sdmmc2_clk", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc2_cmd", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc2_dat0", - OMAP_PIN_INPUT_PULLUP); - - /* - * For 8 wire configurations, Lines DAT4, 5, 6 and 7 need to be muxed - * in the board-*.c files - */ - if (mmc_controller->slots[0].caps & - (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) { - omap_mux_init_signal("sdmmc2_dat1", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc2_dat2", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc2_dat3", - OMAP_PIN_INPUT_PULLUP); - } - if (mmc_controller->slots[0].caps & - MMC_CAP_8_BIT_DATA) { - omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc2_dat5.sdmmc2_dat5", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc2_dat6.sdmmc2_dat6", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc2_dat7.sdmmc2_dat7", - OMAP_PIN_INPUT_PULLUP); - } - } - - /* - * For MMC3 the pins need to be muxed in the board-*.c files - */ - } -} - void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data, int nr_controllers) { @@ -802,8 +721,6 @@ void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data, if (!mmc_data[i]) continue; - omap2_mmc_mux(mmc_data[i], i); - switch (i) { case 0: base = OMAP2_MMC1_BASE; diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 5496bc7d40a..1348ac3d60e 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -16,7 +16,9 @@ #include #include #include +#include +#include "mux.h" #include "hsmmc.h" #include "control.h" @@ -204,6 +206,87 @@ static int nop_mmc_set_power(struct device *dev, int slot, int power_on, return 0; } +static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller, + int controller_nr) +{ + if ((mmc_controller->slots[0].switch_pin > 0) && \ + (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES)) + omap_mux_init_gpio(mmc_controller->slots[0].switch_pin, + OMAP_PIN_INPUT_PULLUP); + if ((mmc_controller->slots[0].gpio_wp > 0) && \ + (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES)) + omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp, + OMAP_PIN_INPUT_PULLUP); + if (cpu_is_omap34xx()) { + if (controller_nr == 0) { + omap_mux_init_signal("sdmmc1_clk", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_cmd", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat0", + OMAP_PIN_INPUT_PULLUP); + if (mmc_controller->slots[0].caps & + (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) { + omap_mux_init_signal("sdmmc1_dat1", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat2", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat3", + OMAP_PIN_INPUT_PULLUP); + } + if (mmc_controller->slots[0].caps & + MMC_CAP_8_BIT_DATA) { + omap_mux_init_signal("sdmmc1_dat4", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat5", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat6", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat7", + OMAP_PIN_INPUT_PULLUP); + } + } + if (controller_nr == 1) { + /* MMC2 */ + omap_mux_init_signal("sdmmc2_clk", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_cmd", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat0", + OMAP_PIN_INPUT_PULLUP); + + /* + * For 8 wire configurations, Lines DAT4, 5, 6 and 7 + * need to be muxed in the board-*.c files + */ + if (mmc_controller->slots[0].caps & + (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) { + omap_mux_init_signal("sdmmc2_dat1", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat2", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat3", + OMAP_PIN_INPUT_PULLUP); + } + if (mmc_controller->slots[0].caps & + MMC_CAP_8_BIT_DATA) { + omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat5.sdmmc2_dat5", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat6.sdmmc2_dat6", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat7.sdmmc2_dat7", + OMAP_PIN_INPUT_PULLUP); + } + } + + /* + * For MMC3 the pins need to be muxed in the board-*.c files + */ + } +} + static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata; void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) @@ -361,6 +444,7 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) continue; } hsmmc_data[c->mmc - 1] = mmc; + omap_hsmmc_mux(hsmmc_data[c->mmc - 1], (c->mmc - 1)); } omap2_init_mmc(hsmmc_data, OMAP34XX_NR_MMC); -- cgit v1.2.3-18-g5258 From 4621d5f8cb435b1ba74efe6e0a7125febb40186b Mon Sep 17 00:00:00 2001 From: Kishore Kadiyala Date: Mon, 28 Feb 2011 20:48:04 +0530 Subject: OMAP: adapt hsmmc to hwmod framework OMAP2420 platform consists of mmc block as in omap1 and not the hsmmc block as present in omap2430, omap3, omap4 platforms. Removing all base address macro defines except keeping one for OMAP2420 and adapting only hsmmc device registration and driver to hwmod framework. Changes involves: 1) Remove controller reset in devices.c which is taken care of by hwmod framework. 2) Using omap-device layer to register device and utilizing data from hwmod data file for base address, dma channel number, Irq_number, device attribute. 3) Update the driver to use dev_attr to find whether controller supports dual volt cards Signed-off-by: Paul Walmsley Signed-off-by: Kishore Kadiyala Reviewed-by: Balaji T K Cc: Benoit Cousson CC: Kevin Hilman Cc: Tony Lindgren Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/devices.c | 168 ----------------- arch/arm/mach-omap2/hsmmc.c | 346 +++++++++++++++++++--------------- arch/arm/plat-omap/include/plat/mmc.h | 20 +- 3 files changed, 198 insertions(+), 336 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 2f4a598ba67..31632ac1ca7 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -544,112 +544,6 @@ static inline void omap_init_aes(void) { } /*-------------------------------------------------------------------------*/ -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) - -#define MMCHS_SYSCONFIG 0x0010 -#define MMCHS_SYSCONFIG_SWRESET (1 << 1) -#define MMCHS_SYSSTATUS 0x0014 -#define MMCHS_SYSSTATUS_RESETDONE (1 << 0) - -static struct platform_device dummy_pdev = { - .dev = { - .bus = &platform_bus_type, - }, -}; - -/** - * omap_hsmmc_reset() - Full reset of each HS-MMC controller - * - * Ensure that each MMC controller is fully reset. Controllers - * left in an unknown state (by bootloader) may prevent retention - * or OFF-mode. This is especially important in cases where the - * MMC driver is not enabled, _or_ built as a module. - * - * In order for reset to work, interface, functional and debounce - * clocks must be enabled. The debounce clock comes from func_32k_clk - * and is not under SW control, so we only enable i- and f-clocks. - **/ -static void __init omap_hsmmc_reset(void) -{ - u32 i, nr_controllers; - struct clk *iclk, *fclk; - - if (cpu_is_omap242x()) - return; - - nr_controllers = cpu_is_omap44xx() ? OMAP44XX_NR_MMC : - (cpu_is_omap34xx() ? OMAP34XX_NR_MMC : OMAP24XX_NR_MMC); - - for (i = 0; i < nr_controllers; i++) { - u32 v, base = 0; - struct device *dev = &dummy_pdev.dev; - - switch (i) { - case 0: - base = OMAP2_MMC1_BASE; - break; - case 1: - base = OMAP2_MMC2_BASE; - break; - case 2: - base = OMAP3_MMC3_BASE; - break; - case 3: - if (!cpu_is_omap44xx()) - return; - base = OMAP4_MMC4_BASE; - break; - case 4: - if (!cpu_is_omap44xx()) - return; - base = OMAP4_MMC5_BASE; - break; - } - - if (cpu_is_omap44xx()) - base += OMAP4_MMC_REG_OFFSET; - - dummy_pdev.id = i; - dev_set_name(&dummy_pdev.dev, "mmci-omap-hs.%d", i); - iclk = clk_get(dev, "ick"); - if (IS_ERR(iclk)) - goto err1; - if (clk_enable(iclk)) - goto err2; - - fclk = clk_get(dev, "fck"); - if (IS_ERR(fclk)) - goto err3; - if (clk_enable(fclk)) - goto err4; - - omap_writel(MMCHS_SYSCONFIG_SWRESET, base + MMCHS_SYSCONFIG); - v = omap_readl(base + MMCHS_SYSSTATUS); - while (!(omap_readl(base + MMCHS_SYSSTATUS) & - MMCHS_SYSSTATUS_RESETDONE)) - cpu_relax(); - - clk_disable(fclk); - clk_put(fclk); - clk_disable(iclk); - clk_put(iclk); - } - return; - -err4: - clk_put(fclk); -err3: - clk_disable(iclk); -err2: - clk_put(iclk); -err1: - printk(KERN_WARNING "%s: Unable to enable clocks for MMC%d, " - "cannot reset.\n", __func__, i); -} -#else -static inline void omap_hsmmc_reset(void) {} -#endif - #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) static inline void omap242x_mmc_mux(struct omap_mmc_platform_data @@ -706,67 +600,6 @@ void __init omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data) #endif -#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) - -void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data, - int nr_controllers) -{ - int i; - char *name; - - for (i = 0; i < nr_controllers; i++) { - unsigned long base, size; - unsigned int irq = 0; - - if (!mmc_data[i]) - continue; - - switch (i) { - case 0: - base = OMAP2_MMC1_BASE; - irq = INT_24XX_MMC_IRQ; - break; - case 1: - base = OMAP2_MMC2_BASE; - irq = INT_24XX_MMC2_IRQ; - break; - case 2: - if (!cpu_is_omap44xx() && !cpu_is_omap34xx()) - return; - base = OMAP3_MMC3_BASE; - irq = INT_34XX_MMC3_IRQ; - break; - case 3: - if (!cpu_is_omap44xx()) - return; - base = OMAP4_MMC4_BASE; - irq = OMAP44XX_IRQ_MMC4; - break; - case 4: - if (!cpu_is_omap44xx()) - return; - base = OMAP4_MMC5_BASE; - irq = OMAP44XX_IRQ_MMC5; - break; - default: - continue; - } - - if (cpu_is_omap44xx()) { - if (i < 3) - irq += OMAP44XX_IRQ_GIC_START; - size = OMAP4_HSMMC_SIZE; - name = "mmci-omap-hs"; - } else { - size = OMAP3_HSMMC_SIZE; - name = "mmci-omap-hs"; - } - omap_mmc_add(name, i, base, size, irq, mmc_data[i]); - }; -} - -#endif - /*-------------------------------------------------------------------------*/ #if defined(CONFIG_HDQ_MASTER_OMAP) || defined(CONFIG_HDQ_MASTER_OMAP_MODULE) @@ -836,7 +669,6 @@ static int __init omap2_init_devices(void) * please keep these calls, and their implementations above, * in alphabetical order so they're easier to sort through. */ - omap_hsmmc_reset(); omap_init_audio(); omap_init_camera(); omap_init_mbox(); diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 1348ac3d60e..d492bc4d342 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -17,6 +17,7 @@ #include #include #include +#include #include "mux.h" #include "hsmmc.h" @@ -30,10 +31,6 @@ static u16 control_mmc1; #define HSMMC_NAME_LEN 9 -static struct hsmmc_controller { - char name[HSMMC_NAME_LEN + 1]; -} hsmmc[OMAP34XX_NR_MMC]; - #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) static int hsmmc_get_context_loss(struct device *dev) @@ -287,13 +284,203 @@ static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller, } } -static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata; +static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, + struct omap_mmc_platform_data *mmc) +{ + char *hc_name; + + hc_name = kzalloc(sizeof(char) * (HSMMC_NAME_LEN + 1), GFP_KERNEL); + if (!hc_name) { + pr_err("Cannot allocate memory for controller slot name\n"); + kfree(hc_name); + return -ENOMEM; + } + + if (c->name) + strncpy(hc_name, c->name, HSMMC_NAME_LEN); + else + snprintf(hc_name, (HSMMC_NAME_LEN + 1), "mmc%islot%i", + c->mmc, 1); + mmc->slots[0].name = hc_name; + mmc->nr_slots = 1; + mmc->slots[0].caps = c->caps; + mmc->slots[0].internal_clock = !c->ext_clock; + mmc->dma_mask = 0xffffffff; + if (cpu_is_omap44xx()) + mmc->reg_offset = OMAP4_MMC_REG_OFFSET; + else + mmc->reg_offset = 0; + + mmc->get_context_loss_count = hsmmc_get_context_loss; + + mmc->slots[0].switch_pin = c->gpio_cd; + mmc->slots[0].gpio_wp = c->gpio_wp; + + mmc->slots[0].remux = c->remux; + mmc->slots[0].init_card = c->init_card; + + if (c->cover_only) + mmc->slots[0].cover = 1; + + if (c->nonremovable) + mmc->slots[0].nonremovable = 1; + + if (c->power_saving) + mmc->slots[0].power_saving = 1; + + if (c->no_off) + mmc->slots[0].no_off = 1; + + if (c->vcc_aux_disable_is_sleep) + mmc->slots[0].vcc_aux_disable_is_sleep = 1; + + /* + * NOTE: MMC slots should have a Vcc regulator set up. + * This may be from a TWL4030-family chip, another + * controllable regulator, or a fixed supply. + * + * temporary HACK: ocr_mask instead of fixed supply + */ + mmc->slots[0].ocr_mask = c->ocr_mask; + + if (cpu_is_omap3517() || cpu_is_omap3505()) + mmc->slots[0].set_power = nop_mmc_set_power; + else + mmc->slots[0].features |= HSMMC_HAS_PBIAS; + + if (cpu_is_omap44xx() && (omap_rev() > OMAP4430_REV_ES1_0)) + mmc->slots[0].features |= HSMMC_HAS_UPDATED_RESET; + + switch (c->mmc) { + case 1: + if (mmc->slots[0].features & HSMMC_HAS_PBIAS) { + /* on-chip level shifting via PBIAS0/PBIAS1 */ + if (cpu_is_omap44xx()) { + mmc->slots[0].before_set_reg = + omap4_hsmmc1_before_set_reg; + mmc->slots[0].after_set_reg = + omap4_hsmmc1_after_set_reg; + } else { + mmc->slots[0].before_set_reg = + omap_hsmmc1_before_set_reg; + mmc->slots[0].after_set_reg = + omap_hsmmc1_after_set_reg; + } + } + + /* OMAP3630 HSMMC1 supports only 4-bit */ + if (cpu_is_omap3630() && + (c->caps & MMC_CAP_8_BIT_DATA)) { + c->caps &= ~MMC_CAP_8_BIT_DATA; + c->caps |= MMC_CAP_4_BIT_DATA; + mmc->slots[0].caps = c->caps; + } + break; + case 2: + if (c->ext_clock) + c->transceiver = 1; + if (c->transceiver && (c->caps & MMC_CAP_8_BIT_DATA)) { + c->caps &= ~MMC_CAP_8_BIT_DATA; + c->caps |= MMC_CAP_4_BIT_DATA; + } + /* FALLTHROUGH */ + case 3: + if (mmc->slots[0].features & HSMMC_HAS_PBIAS) { + /* off-chip level shifting, or none */ + mmc->slots[0].before_set_reg = hsmmc23_before_set_reg; + mmc->slots[0].after_set_reg = NULL; + } + break; + case 4: + case 5: + mmc->slots[0].before_set_reg = NULL; + mmc->slots[0].after_set_reg = NULL; + break; + default: + pr_err("MMC%d configuration not supported!\n", c->mmc); + kfree(hc_name); + return -ENODEV; + } + return 0; +} + +static struct omap_device_pm_latency omap_hsmmc_latency[] = { + [0] = { + .deactivate_func = omap_device_idle_hwmods, + .activate_func = omap_device_enable_hwmods, + .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, + }, + /* + * XXX There should also be an entry here to power off/on the + * MMC regulators/PBIAS cells, etc. + */ +}; + +#define MAX_OMAP_MMC_HWMOD_NAME_LEN 16 + +void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr) +{ + struct omap_hwmod *oh; + struct omap_device *od; + struct omap_device_pm_latency *ohl; + char oh_name[MAX_OMAP_MMC_HWMOD_NAME_LEN]; + struct omap_mmc_platform_data *mmc_data; + struct omap_mmc_dev_attr *mmc_dev_attr; + char *name; + int l; + int ohl_cnt = 0; + + mmc_data = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL); + if (!mmc_data) { + pr_err("Cannot allocate memory for mmc device!\n"); + goto done; + } + + if (omap_hsmmc_pdata_init(hsmmcinfo, mmc_data) < 0) { + pr_err("%s fails!\n", __func__); + goto done; + } + omap_hsmmc_mux(mmc_data, (ctrl_nr - 1)); + + name = "mmci-omap-hs"; + ohl = omap_hsmmc_latency; + ohl_cnt = ARRAY_SIZE(omap_hsmmc_latency); + + l = snprintf(oh_name, MAX_OMAP_MMC_HWMOD_NAME_LEN, + "mmc%d", ctrl_nr); + WARN(l >= MAX_OMAP_MMC_HWMOD_NAME_LEN, + "String buffer overflow in MMC%d device setup\n", ctrl_nr); + oh = omap_hwmod_lookup(oh_name); + if (!oh) { + pr_err("Could not look up %s\n", oh_name); + kfree(mmc_data->slots[0].name); + goto done; + } + + if (oh->dev_attr != NULL) { + mmc_dev_attr = oh->dev_attr; + mmc_data->controller_flags = mmc_dev_attr->flags; + } + + od = omap_device_build(name, ctrl_nr - 1, oh, mmc_data, + sizeof(struct omap_mmc_platform_data), ohl, ohl_cnt, false); + if (IS_ERR(od)) { + WARN(1, "Cant build omap_device for %s:%s.\n", name, oh->name); + kfree(mmc_data->slots[0].name); + goto done; + } + /* + * return device handle to board setup code + * required to populate for regulator framework structure + */ + hsmmcinfo->dev = &od->pdev.dev; + +done: + kfree(mmc_data); +} void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) { - struct omap2_hsmmc_info *c; - int nr_hsmmc = ARRAY_SIZE(hsmmc_data); - int i; u32 reg; if (!cpu_is_omap44xx()) { @@ -319,148 +506,9 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) omap4_ctrl_pad_writel(reg, control_mmc1); } - for (c = controllers; c->mmc; c++) { - struct hsmmc_controller *hc = hsmmc + c->mmc - 1; - struct omap_mmc_platform_data *mmc = hsmmc_data[c->mmc - 1]; - - if (!c->mmc || c->mmc > nr_hsmmc) { - pr_debug("MMC%d: no such controller\n", c->mmc); - continue; - } - if (mmc) { - pr_debug("MMC%d: already configured\n", c->mmc); - continue; - } - - mmc = kzalloc(sizeof(struct omap_mmc_platform_data), - GFP_KERNEL); - if (!mmc) { - pr_err("Cannot allocate memory for mmc device!\n"); - goto done; - } - - if (c->name) - strncpy(hc->name, c->name, HSMMC_NAME_LEN); - else - snprintf(hc->name, ARRAY_SIZE(hc->name), - "mmc%islot%i", c->mmc, 1); - mmc->slots[0].name = hc->name; - mmc->nr_slots = 1; - mmc->slots[0].caps = c->caps; - mmc->slots[0].internal_clock = !c->ext_clock; - mmc->dma_mask = 0xffffffff; - if (cpu_is_omap44xx()) - mmc->reg_offset = OMAP4_MMC_REG_OFFSET; - else - mmc->reg_offset = 0; - - mmc->get_context_loss_count = hsmmc_get_context_loss; - - mmc->slots[0].switch_pin = c->gpio_cd; - mmc->slots[0].gpio_wp = c->gpio_wp; - - mmc->slots[0].remux = c->remux; - mmc->slots[0].init_card = c->init_card; - - if (c->cover_only) - mmc->slots[0].cover = 1; - - if (c->nonremovable) - mmc->slots[0].nonremovable = 1; - - if (c->power_saving) - mmc->slots[0].power_saving = 1; - - if (c->no_off) - mmc->slots[0].no_off = 1; - - if (c->vcc_aux_disable_is_sleep) - mmc->slots[0].vcc_aux_disable_is_sleep = 1; - - /* NOTE: MMC slots should have a Vcc regulator set up. - * This may be from a TWL4030-family chip, another - * controllable regulator, or a fixed supply. - * - * temporary HACK: ocr_mask instead of fixed supply - */ - mmc->slots[0].ocr_mask = c->ocr_mask; - - if (cpu_is_omap3517() || cpu_is_omap3505()) - mmc->slots[0].set_power = nop_mmc_set_power; - else - mmc->slots[0].features |= HSMMC_HAS_PBIAS; - - if (cpu_is_omap44xx() && (omap_rev() > OMAP4430_REV_ES1_0)) - mmc->slots[0].features |= HSMMC_HAS_UPDATED_RESET; - - switch (c->mmc) { - case 1: - if (mmc->slots[0].features & HSMMC_HAS_PBIAS) { - /* on-chip level shifting via PBIAS0/PBIAS1 */ - if (cpu_is_omap44xx()) { - mmc->slots[0].before_set_reg = - omap4_hsmmc1_before_set_reg; - mmc->slots[0].after_set_reg = - omap4_hsmmc1_after_set_reg; - } else { - mmc->slots[0].before_set_reg = - omap_hsmmc1_before_set_reg; - mmc->slots[0].after_set_reg = - omap_hsmmc1_after_set_reg; - } - } - - /* Omap3630 HSMMC1 supports only 4-bit */ - if (cpu_is_omap3630() && - (c->caps & MMC_CAP_8_BIT_DATA)) { - c->caps &= ~MMC_CAP_8_BIT_DATA; - c->caps |= MMC_CAP_4_BIT_DATA; - mmc->slots[0].caps = c->caps; - } - break; - case 2: - if (c->ext_clock) - c->transceiver = 1; - if (c->transceiver && (c->caps & MMC_CAP_8_BIT_DATA)) { - c->caps &= ~MMC_CAP_8_BIT_DATA; - c->caps |= MMC_CAP_4_BIT_DATA; - } - /* FALLTHROUGH */ - case 3: - if (mmc->slots[0].features & HSMMC_HAS_PBIAS) { - /* off-chip level shifting, or none */ - mmc->slots[0].before_set_reg = hsmmc23_before_set_reg; - mmc->slots[0].after_set_reg = NULL; - } - break; - case 4: - case 5: - mmc->slots[0].before_set_reg = NULL; - mmc->slots[0].after_set_reg = NULL; - break; - default: - pr_err("MMC%d configuration not supported!\n", c->mmc); - kfree(mmc); - continue; - } - hsmmc_data[c->mmc - 1] = mmc; - omap_hsmmc_mux(hsmmc_data[c->mmc - 1], (c->mmc - 1)); - } - - omap2_init_mmc(hsmmc_data, OMAP34XX_NR_MMC); - - /* pass the device nodes back to board setup code */ - for (c = controllers; c->mmc; c++) { - struct omap_mmc_platform_data *mmc = hsmmc_data[c->mmc - 1]; + for (; controllers->mmc; controllers++) + omap_init_hsmmc(controllers, controllers->mmc); - if (!c->mmc || c->mmc > nr_hsmmc) - continue; - c->dev = mmc->dev; - } - -done: - for (i = 0; i < nr_hsmmc; i++) - kfree(hsmmc_data[i]); } #endif diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h index a7afab09571..f38fef9f131 100644 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ b/arch/arm/plat-omap/include/plat/mmc.h @@ -24,22 +24,10 @@ #define OMAP1_MMC2_BASE 0xfffb7c00 /* omap16xx only */ #define OMAP24XX_NR_MMC 2 -#define OMAP34XX_NR_MMC 3 -#define OMAP44XX_NR_MMC 5 #define OMAP2420_MMC_SIZE OMAP1_MMC_SIZE -#define OMAP3_HSMMC_SIZE 0x200 -#define OMAP4_HSMMC_SIZE 0x1000 #define OMAP2_MMC1_BASE 0x4809c000 -#define OMAP2_MMC2_BASE 0x480b4000 -#define OMAP3_MMC3_BASE 0x480ad000 -#define OMAP4_MMC4_BASE 0x480d1000 -#define OMAP4_MMC5_BASE 0x480d5000 + #define OMAP4_MMC_REG_OFFSET 0x100 -#define HSMMC5 (1 << 4) -#define HSMMC4 (1 << 3) -#define HSMMC3 (1 << 2) -#define HSMMC2 (1 << 1) -#define HSMMC1 (1 << 0) #define OMAP_MMC_MAX_SLOTS 2 @@ -169,8 +157,6 @@ extern void omap_mmc_notify_cover_event(struct device *dev, int slot, void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, int nr_controllers); void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data); -void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data, - int nr_controllers); int omap_mmc_add(const char *name, int id, unsigned long base, unsigned long size, unsigned int irq, struct omap_mmc_platform_data *data); @@ -182,10 +168,6 @@ static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data) { } -static inline void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data, - int nr_controllers) -{ -} static inline int omap_mmc_add(const char *name, int id, unsigned long base, unsigned long size, unsigned int irq, struct omap_mmc_platform_data *data) -- cgit v1.2.3-18-g5258 From 0005ae73cfe44ee42d0be12a12cc82bf982f518e Mon Sep 17 00:00:00 2001 From: Kishore Kadiyala Date: Mon, 28 Feb 2011 20:48:05 +0530 Subject: OMAP: hsmmc: Rename the device and driver Modifying the device & driver name from "mmci-omap-hs" to "omap_hsmmc". Signed-off-by: Kishore Kadiyala Acked-by: Benoit Cousson Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-2430sdp.c | 2 +- arch/arm/mach-omap2/board-3430sdp.c | 6 +++--- arch/arm/mach-omap2/board-4430sdp.c | 14 +++++++------- arch/arm/mach-omap2/board-devkit8000.c | 2 +- arch/arm/mach-omap2/board-igep0020.c | 6 +++--- arch/arm/mach-omap2/board-igep0030.c | 6 +++--- arch/arm/mach-omap2/board-omap3evm.c | 2 +- arch/arm/mach-omap2/board-omap3pandora.c | 6 +++--- arch/arm/mach-omap2/board-omap4panda.c | 4 ++-- arch/arm/mach-omap2/board-rm680.c | 2 +- arch/arm/mach-omap2/board-rx51-peripherals.c | 8 ++++---- arch/arm/mach-omap2/board-zoom-peripherals.c | 2 +- arch/arm/mach-omap2/clock2430_data.c | 12 ++++++------ arch/arm/mach-omap2/clock3xxx_data.c | 12 ++++++------ arch/arm/mach-omap2/clock44xx_data.c | 20 ++++++++++---------- arch/arm/mach-omap2/hsmmc.c | 2 +- 16 files changed, 53 insertions(+), 53 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index cc42d474c44..ab0880ba3c4 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -149,7 +149,7 @@ static void __init omap_2430sdp_init_early(void) } static struct regulator_consumer_supply sdp2430_vmmc1_supplies[] = { - REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0"), + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 8950ecc9b94..40b0174a4ef 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -410,15 +410,15 @@ static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = { }; static struct regulator_consumer_supply sdp3430_vmmc1_supplies[] = { - REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0"), + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; static struct regulator_consumer_supply sdp3430_vsim_supplies[] = { - REGULATOR_SUPPLY("vmmc_aux", "mmci-omap-hs.0"), + REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), }; static struct regulator_consumer_supply sdp3430_vmmc2_supplies[] = { - REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1"), + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), }; /* diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 1a943be822c..f914099b225 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -348,11 +348,6 @@ static struct twl4030_usb_data omap4_usbphy_data = { }; static struct omap2_hsmmc_info mmc[] = { - { - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, - .gpio_wp = -EINVAL, - }, { .mmc = 2, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, @@ -361,19 +356,24 @@ static struct omap2_hsmmc_info mmc[] = { .nonremovable = true, .ocr_mask = MMC_VDD_29_30, }, + { + .mmc = 1, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, + .gpio_wp = -EINVAL, + }, {} /* Terminator */ }; static struct regulator_consumer_supply sdp4430_vaux_supply[] = { { .supply = "vmmc", - .dev_name = "mmci-omap-hs.1", + .dev_name = "omap_hsmmc.1", }, }; static struct regulator_consumer_supply sdp4430_vmmc_supply[] = { { .supply = "vmmc", - .dev_name = "mmci-omap-hs.0", + .dev_name = "omap_hsmmc.0", }, }; diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 54abdd06436..c9170f4d5d4 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -140,7 +140,7 @@ static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev) } static struct regulator_consumer_supply devkit8000_vmmc1_supply = - REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0"); + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"); /* ads7846 on SPI */ diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 54e6318f4a8..1877c28961e 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -250,7 +250,7 @@ static inline void __init igep2_init_smsc911x(void) { } #endif static struct regulator_consumer_supply igep2_vmmc1_supply = - REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0"); + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"); /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ static struct regulator_init_data igep2_vmmc1 = { @@ -268,7 +268,7 @@ static struct regulator_init_data igep2_vmmc1 = { }; static struct regulator_consumer_supply igep2_vio_supply = - REGULATOR_SUPPLY("vmmc_aux", "mmci-omap-hs.1"); + REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"); static struct regulator_init_data igep2_vio = { .constraints = { @@ -286,7 +286,7 @@ static struct regulator_init_data igep2_vio = { }; static struct regulator_consumer_supply igep2_vmmc2_supply = - REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1"); + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"); static struct regulator_init_data igep2_vmmc2 = { .constraints = { diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c index d75028e48f5..4273d0672ef 100644 --- a/arch/arm/mach-omap2/board-igep0030.c +++ b/arch/arm/mach-omap2/board-igep0030.c @@ -142,7 +142,7 @@ static void __init igep3_flash_init(void) {} #endif static struct regulator_consumer_supply igep3_vmmc1_supply = - REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0"); + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"); /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ static struct regulator_init_data igep3_vmmc1 = { @@ -160,7 +160,7 @@ static struct regulator_init_data igep3_vmmc1 = { }; static struct regulator_consumer_supply igep3_vio_supply = - REGULATOR_SUPPLY("vmmc_aux", "mmci-omap-hs.1"); + REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"); static struct regulator_init_data igep3_vio = { .constraints = { @@ -178,7 +178,7 @@ static struct regulator_init_data igep3_vio = { }; static struct regulator_consumer_supply igep3_vmmc2_supply = - REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1"); + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"); static struct regulator_init_data igep3_vmmc2 = { .constraints = { diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 7341f966bf1..f2a3a883cca 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -604,7 +604,7 @@ static struct regulator_init_data omap3evm_vio = { #define OMAP3EVM_WLAN_IRQ_GPIO (149) static struct regulator_consumer_supply omap3evm_vmmc2_supply = - REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1"); + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"); /* VMMC2 for driving the WL12xx module */ static struct regulator_init_data omap3evm_vmmc2 = { diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 17ef5479c7f..ed138694ccb 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -333,13 +333,13 @@ static struct twl4030_gpio_platform_data omap3pandora_gpio_data = { }; static struct regulator_consumer_supply pandora_vmmc1_supply = - REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0"); + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"); static struct regulator_consumer_supply pandora_vmmc2_supply = - REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1"); + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"); static struct regulator_consumer_supply pandora_vmmc3_supply = - REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.2"); + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"); static struct regulator_consumer_supply pandora_vdda_dac_supply = REGULATOR_SUPPLY("vdda_dac", "omapdss"); diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 3dd241b9515..12bf09a7c5e 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -180,13 +180,13 @@ static struct omap2_hsmmc_info mmc[] = { static struct regulator_consumer_supply omap4_panda_vmmc_supply[] = { { .supply = "vmmc", - .dev_name = "mmci-omap-hs.0", + .dev_name = "omap_hsmmc.0", }, }; static struct regulator_consumer_supply omap4_panda_vmmc5_supply = { .supply = "vmmc", - .dev_name = "mmci-omap-hs.4", + .dev_name = "omap_hsmmc.4", }; static struct regulator_init_data panda_vmmc5 = { diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index bdebcb7328e..2af8b05e786 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -33,7 +33,7 @@ #include "sdram-nokia.h" static struct regulator_consumer_supply rm680_vemmc_consumers[] = { - REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1"), + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), }; /* Fixed regulator for internal eMMC */ diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index e75e240cad6..b74357ffe61 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -331,13 +331,13 @@ static struct omap2_hsmmc_info mmc[] __initdata = { }; static struct regulator_consumer_supply rx51_vmmc1_supply = - REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0"); + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"); static struct regulator_consumer_supply rx51_vaux3_supply = - REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1"); + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"); static struct regulator_consumer_supply rx51_vsim_supply = - REGULATOR_SUPPLY("vmmc_aux", "mmci-omap-hs.1"); + REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"); static struct regulator_consumer_supply rx51_vmmc2_supplies[] = { /* tlv320aic3x analog supplies */ @@ -348,7 +348,7 @@ static struct regulator_consumer_supply rx51_vmmc2_supplies[] = { /* tpa6130a2 */ REGULATOR_SUPPLY("Vdd", "2-0060"), /* Keep vmmc as last item. It is not iterated for newer boards */ - REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1"), + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), }; static struct regulator_consumer_supply rx51_vio_supplies[] = { diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index e0e040f34c6..7a098a4cdfe 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -118,7 +118,7 @@ static struct regulator_consumer_supply zoom_vmmc2_supply = { static struct regulator_consumer_supply zoom_vmmc3_supply = { .supply = "vmmc", - .dev_name = "mmci-omap-hs.2", + .dev_name = "omap_hsmmc.2", }; /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c index c047dcd007e..5c647ce05b0 100644 --- a/arch/arm/mach-omap2/clock2430_data.c +++ b/arch/arm/mach-omap2/clock2430_data.c @@ -1984,15 +1984,15 @@ static struct omap_clk omap2430_clks[] = { CLK(NULL, "pka_ick", &pka_ick, CK_243X), CLK(NULL, "usb_fck", &usb_fck, CK_243X), CLK("musb-omap2430", "ick", &usbhs_ick, CK_243X), - CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_243X), - CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_243X), - CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_243X), - CLK("mmci-omap-hs.1", "fck", &mmchs2_fck, CK_243X), + CLK("omap_hsmmc.0", "ick", &mmchs1_ick, CK_243X), + CLK("omap_hsmmc.0", "fck", &mmchs1_fck, CK_243X), + CLK("omap_hsmmc.1", "ick", &mmchs2_ick, CK_243X), + CLK("omap_hsmmc.1", "fck", &mmchs2_fck, CK_243X), CLK(NULL, "gpio5_ick", &gpio5_ick, CK_243X), CLK(NULL, "gpio5_fck", &gpio5_fck, CK_243X), CLK(NULL, "mdm_intc_ick", &mdm_intc_ick, CK_243X), - CLK("mmci-omap-hs.0", "mmchsdb_fck", &mmchsdb1_fck, CK_243X), - CLK("mmci-omap-hs.1", "mmchsdb_fck", &mmchsdb2_fck, CK_243X), + CLK("omap_hsmmc.0", "mmchsdb_fck", &mmchsdb1_fck, CK_243X), + CLK("omap_hsmmc.1", "mmchsdb_fck", &mmchsdb2_fck, CK_243X), }; /* diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index f14d986f0b5..052ac329282 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3290,10 +3290,10 @@ static struct omap_clk omap3xxx_clks[] = { CLK("omap-mcbsp.1", "prcm_fck", &core_96m_fck, CK_3XXX), CLK("omap-mcbsp.5", "prcm_fck", &core_96m_fck, CK_3XXX), CLK(NULL, "core_96m_fck", &core_96m_fck, CK_3XXX), - CLK("mmci-omap-hs.2", "fck", &mmchs3_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("mmci-omap-hs.1", "fck", &mmchs2_fck, CK_3XXX), + CLK("omap_hsmmc.2", "fck", &mmchs3_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK("omap_hsmmc.1", "fck", &mmchs2_fck, CK_3XXX), CLK(NULL, "mspro_fck", &mspro_fck, CK_34XX | CK_36XX), - CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_3XXX), + CLK("omap_hsmmc.0", "fck", &mmchs1_fck, CK_3XXX), CLK("omap_i2c.3", "fck", &i2c3_fck, CK_3XXX), CLK("omap_i2c.2", "fck", &i2c2_fck, CK_3XXX), CLK("omap_i2c.1", "fck", &i2c1_fck, CK_3XXX), @@ -3323,13 +3323,13 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "core_l4_ick", &core_l4_ick, CK_3XXX), CLK(NULL, "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK("ehci-omap.0", "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("mmci-omap-hs.2", "ick", &mmchs3_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK("omap_hsmmc.2", "ick", &mmchs3_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "icr_ick", &icr_ick, CK_34XX | CK_36XX), CLK("omap-aes", "ick", &aes2_ick, CK_34XX | CK_36XX), CLK("omap-sham", "ick", &sha12_ick, CK_34XX | CK_36XX), CLK(NULL, "des2_ick", &des2_ick, CK_34XX | CK_36XX), - CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_3XXX), - CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_3XXX), + CLK("omap_hsmmc.1", "ick", &mmchs2_ick, CK_3XXX), + CLK("omap_hsmmc.0", "ick", &mmchs1_ick, CK_3XXX), CLK(NULL, "mspro_ick", &mspro_ick, CK_34XX | CK_36XX), CLK("omap_hdq.0", "ick", &hdq_ick, CK_3XXX), CLK("omap2_mcspi.4", "ick", &mcspi4_ick, CK_3XXX), diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index de9ec8ddd2a..fdbc0426b6f 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -3158,11 +3158,11 @@ static struct omap_clk omap44xx_clks[] = { CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_443X), CLK("omap2_mcspi.3", "fck", &mcspi3_fck, CK_443X), CLK("omap2_mcspi.4", "fck", &mcspi4_fck, CK_443X), - CLK("mmci-omap-hs.0", "fck", &mmc1_fck, CK_443X), - CLK("mmci-omap-hs.1", "fck", &mmc2_fck, CK_443X), - CLK("mmci-omap-hs.2", "fck", &mmc3_fck, CK_443X), - CLK("mmci-omap-hs.3", "fck", &mmc4_fck, CK_443X), - CLK("mmci-omap-hs.4", "fck", &mmc5_fck, CK_443X), + CLK("omap_hsmmc.0", "fck", &mmc1_fck, CK_443X), + CLK("omap_hsmmc.1", "fck", &mmc2_fck, CK_443X), + CLK("omap_hsmmc.2", "fck", &mmc3_fck, CK_443X), + CLK("omap_hsmmc.3", "fck", &mmc4_fck, CK_443X), + CLK("omap_hsmmc.4", "fck", &mmc5_fck, CK_443X), CLK(NULL, "ocp2scp_usb_phy_phy_48m", &ocp2scp_usb_phy_phy_48m, CK_443X), CLK(NULL, "ocp2scp_usb_phy_ick", &ocp2scp_usb_phy_ick, CK_443X), CLK(NULL, "ocp_wp_noc_ick", &ocp_wp_noc_ick, CK_443X), @@ -3245,11 +3245,11 @@ static struct omap_clk omap44xx_clks[] = { CLK("omap_i2c.2", "ick", &dummy_ck, CK_443X), CLK("omap_i2c.3", "ick", &dummy_ck, CK_443X), CLK("omap_i2c.4", "ick", &dummy_ck, CK_443X), - CLK("mmci-omap-hs.0", "ick", &dummy_ck, CK_443X), - CLK("mmci-omap-hs.1", "ick", &dummy_ck, CK_443X), - CLK("mmci-omap-hs.2", "ick", &dummy_ck, CK_443X), - CLK("mmci-omap-hs.3", "ick", &dummy_ck, CK_443X), - CLK("mmci-omap-hs.4", "ick", &dummy_ck, CK_443X), + CLK("omap_hsmmc.0", "ick", &dummy_ck, CK_443X), + CLK("omap_hsmmc.1", "ick", &dummy_ck, CK_443X), + CLK("omap_hsmmc.2", "ick", &dummy_ck, CK_443X), + CLK("omap_hsmmc.3", "ick", &dummy_ck, CK_443X), + CLK("omap_hsmmc.4", "ick", &dummy_ck, CK_443X), CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_443X), CLK("omap-mcbsp.2", "ick", &dummy_ck, CK_443X), CLK("omap-mcbsp.3", "ick", &dummy_ck, CK_443X), diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index d492bc4d342..137e1a5f3d8 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -442,7 +442,7 @@ void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr) } omap_hsmmc_mux(mmc_data, (ctrl_nr - 1)); - name = "mmci-omap-hs"; + name = "omap_hsmmc"; ohl = omap_hsmmc_latency; ohl_cnt = ARRAY_SIZE(omap_hsmmc_latency); -- cgit v1.2.3-18-g5258 From 2cb82400719e085a3c226cf7cce8950208f09a06 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Sun, 27 Feb 2011 18:52:24 -0500 Subject: arch/tile: catch up with section naming convention in 2.6.35 The convention changed to, e.g., ".data..page_aligned". This commit fixes the places in the tile architecture that were still using the old convention. One tile-specific section (.init.page) was dropped in favor of just using an "aligned" attribute. Sam Ravnborg pointed out __PAGE_ALIGNED_BSS, etc. Signed-off-by: Chris Metcalf --- arch/tile/include/asm/cache.h | 2 +- arch/tile/kernel/head_32.S | 4 ++-- arch/tile/kernel/vmlinux.lds.S | 5 +---- arch/tile/lib/atomic_32.c | 3 +-- arch/tile/mm/init.c | 2 +- 5 files changed, 6 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/tile/include/asm/cache.h b/arch/tile/include/asm/cache.h index 08a2815b5e4..392e5333dd8 100644 --- a/arch/tile/include/asm/cache.h +++ b/arch/tile/include/asm/cache.h @@ -40,7 +40,7 @@ #define INTERNODE_CACHE_BYTES L2_CACHE_BYTES /* Group together read-mostly things to avoid cache false sharing */ -#define __read_mostly __attribute__((__section__(".data.read_mostly"))) +#define __read_mostly __attribute__((__section__(".data..read_mostly"))) /* * Attribute for data that is kept read/write coherent until the end of diff --git a/arch/tile/kernel/head_32.S b/arch/tile/kernel/head_32.S index 90e7c443569..05b5f4d54d9 100644 --- a/arch/tile/kernel/head_32.S +++ b/arch/tile/kernel/head_32.S @@ -133,7 +133,7 @@ ENTRY(_start) } ENDPROC(_start) -.section ".bss.page_aligned","w" +__PAGE_ALIGNED_BSS .align PAGE_SIZE ENTRY(empty_zero_page) .fill PAGE_SIZE,1,0 @@ -148,7 +148,7 @@ ENTRY(empty_zero_page) .word (\bits1) | (HV_CPA_TO_PFN(\cpa) << HV_PTE_INDEX_PFN) .endm -.section ".data.page_aligned","wa" +__PAGE_ALIGNED_DATA .align PAGE_SIZE ENTRY(swapper_pg_dir) /* diff --git a/arch/tile/kernel/vmlinux.lds.S b/arch/tile/kernel/vmlinux.lds.S index 25fdc0c1839..4e211c1bf50 100644 --- a/arch/tile/kernel/vmlinux.lds.S +++ b/arch/tile/kernel/vmlinux.lds.S @@ -59,10 +59,7 @@ SECTIONS . = ALIGN(PAGE_SIZE); VMLINUX_SYMBOL(_sinitdata) = .; - .init.page : AT (ADDR(.init.page) - LOAD_OFFSET) { - *(.init.page) - } :data =0 - INIT_DATA_SECTION(16) + INIT_DATA_SECTION(16) :data =0 PERCPU(PAGE_SIZE) . = ALIGN(PAGE_SIZE); VMLINUX_SYMBOL(_einitdata) = .; diff --git a/arch/tile/lib/atomic_32.c b/arch/tile/lib/atomic_32.c index 7a5cc706ab6..20c31626f72 100644 --- a/arch/tile/lib/atomic_32.c +++ b/arch/tile/lib/atomic_32.c @@ -46,8 +46,7 @@ struct atomic_locks_on_cpu *atomic_lock_ptr[ATOMIC_HASH_L1_SIZE] #else /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */ /* This page is remapped on startup to be hash-for-home. */ -int atomic_locks[PAGE_SIZE / sizeof(int) /* Only ATOMIC_HASH_SIZE is used */] - __attribute__((aligned(PAGE_SIZE), section(".bss.page_aligned"))); +int atomic_locks[PAGE_SIZE / sizeof(int)] __page_aligned_bss; #endif /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */ diff --git a/arch/tile/mm/init.c b/arch/tile/mm/init.c index 0b9ce69b0ee..e34597e512d 100644 --- a/arch/tile/mm/init.c +++ b/arch/tile/mm/init.c @@ -445,7 +445,7 @@ static pmd_t *__init get_pmd(pgd_t pgtables[], unsigned long va) /* Temporary page table we use for staging. */ static pgd_t pgtables[PTRS_PER_PGD] - __attribute__((section(".init.page"))); + __attribute__((aligned(HV_PAGE_TABLE_ALIGN))); /* * This maps the physical memory to kernel virtual address space, a total -- cgit v1.2.3-18-g5258 From 04f7a3f12e10032ee3d44df1a509dbf5b2001fce Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Mon, 28 Feb 2011 13:08:32 -0500 Subject: arch/tile: bug fix: exec'ed task thought it was still single-stepping To handle single-step, tile mmap's a page of memory in the process space for each thread and uses it to construct a version of the instruction that we want to single step. If the process exec's, though, we lose that mapping, and the kernel needs to be aware that it will need to recreate it if the exec'ed process than tries to single-step as well. Also correct some int32_t to s32 for better kernel style. Signed-off-by: Chris Metcalf --- arch/tile/include/asm/ptrace.h | 3 +++ arch/tile/kernel/process.c | 4 ++++ arch/tile/kernel/single_step.c | 21 +++++++++++++++++++-- 3 files changed, 26 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/tile/include/asm/ptrace.h b/arch/tile/include/asm/ptrace.h index ac6d343129d..6be2246e015 100644 --- a/arch/tile/include/asm/ptrace.h +++ b/arch/tile/include/asm/ptrace.h @@ -141,6 +141,9 @@ struct single_step_state { /* Single-step the instruction at regs->pc */ extern void single_step_once(struct pt_regs *regs); +/* Clean up after execve(). */ +extern void single_step_execve(void); + struct task_struct; extern void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, diff --git a/arch/tile/kernel/process.c b/arch/tile/kernel/process.c index e90eb53173b..5db8b5b63ce 100644 --- a/arch/tile/kernel/process.c +++ b/arch/tile/kernel/process.c @@ -574,6 +574,8 @@ SYSCALL_DEFINE4(execve, const char __user *, path, goto out; error = do_execve(filename, argv, envp, regs); putname(filename); + if (error == 0) + single_step_execve(); out: return error; } @@ -593,6 +595,8 @@ long compat_sys_execve(const char __user *path, goto out; error = compat_do_execve(filename, argv, envp, regs); putname(filename); + if (error == 0) + single_step_execve(); out: return error; } diff --git a/arch/tile/kernel/single_step.c b/arch/tile/kernel/single_step.c index 1eb3b39e36c..84a729e06ec 100644 --- a/arch/tile/kernel/single_step.c +++ b/arch/tile/kernel/single_step.c @@ -56,7 +56,7 @@ enum mem_op { MEMOP_STORE_POSTINCR }; -static inline tile_bundle_bits set_BrOff_X1(tile_bundle_bits n, int32_t offset) +static inline tile_bundle_bits set_BrOff_X1(tile_bundle_bits n, s32 offset) { tile_bundle_bits result; @@ -254,6 +254,18 @@ P("\n"); return bundle; } +/* + * Called after execve() has started the new image. This allows us + * to reset the info state. Note that the the mmap'ed memory, if there + * was any, has already been unmapped by the exec. + */ +void single_step_execve(void) +{ + struct thread_info *ti = current_thread_info(); + kfree(ti->step_state); + ti->step_state = NULL; +} + /** * single_step_once() - entry point when single stepping has been triggered. * @regs: The machine register state @@ -373,7 +385,7 @@ void single_step_once(struct pt_regs *regs) /* branches */ case BRANCH_OPCODE_X1: { - int32_t offset = signExtend17(get_BrOff_X1(bundle)); + s32 offset = signExtend17(get_BrOff_X1(bundle)); /* * For branches, we use a rewriting trick to let the @@ -731,4 +743,9 @@ void single_step_once(struct pt_regs *regs) __insn_mtspr(SPR_SINGLE_STEP_EN_K_K, 1 << USER_PL); } +void single_step_execve(void) +{ + /* Nothing */ +} + #endif /* !__tilegx__ */ -- cgit v1.2.3-18-g5258 From 13371731487896a6ef158b1cd74297f40a3da4bb Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Mon, 28 Feb 2011 13:21:52 -0500 Subject: arch/tile: fix __ndelay etc to work better The current implementations of __ndelay and __udelay call a hypervisor service to delay, but the hypervisor service isn't actually implemented very well, and the consensus is that Linux should handle figuring this out natively and not use a hypervisor service. By converting nanoseconds to cycles, and then spinning until the cycle counter reaches the desired cycle, we get several benefits: first, we are sensitive to the actual clock speed; second, we use less power by issuing a slow SPR read once every six cycles while we delay; and third, we properly handle the case of an interrupt by exiting at the target time rather than after some number of cycles. Signed-off-by: Chris Metcalf --- arch/tile/include/asm/timex.h | 3 +++ arch/tile/include/hv/hypervisor.h | 5 +++++ arch/tile/kernel/entry.S | 6 ------ arch/tile/kernel/time.c | 10 ++++++++++ arch/tile/lib/delay.c | 21 ++++++++++++++++----- 5 files changed, 34 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/tile/include/asm/timex.h b/arch/tile/include/asm/timex.h index 3baf5fc4c0a..29921f0b86d 100644 --- a/arch/tile/include/asm/timex.h +++ b/arch/tile/include/asm/timex.h @@ -38,6 +38,9 @@ static inline cycles_t get_cycles(void) cycles_t get_clock_rate(void); +/* Convert nanoseconds to core clock cycles. */ +cycles_t ns2cycles(unsigned long nsecs); + /* Called at cpu initialization to set some low-level constants. */ void setup_clock(void); diff --git a/arch/tile/include/hv/hypervisor.h b/arch/tile/include/hv/hypervisor.h index f672544cd4f..103986b0c10 100644 --- a/arch/tile/include/hv/hypervisor.h +++ b/arch/tile/include/hv/hypervisor.h @@ -963,6 +963,11 @@ HV_ASIDRange hv_inquire_asid(int idx); /** Waits for at least the specified number of nanoseconds then returns. + * + * NOTE: this deprecated function currently assumes a 750 MHz clock, + * and is thus not generally suitable for use. New code should call + * hv_sysconf(HV_SYSCONF_CPU_SPEED), compute a cycle count to wait for, + * and delay by looping while checking the cycle counter SPR. * * @param nanosecs The number of nanoseconds to sleep. */ diff --git a/arch/tile/kernel/entry.S b/arch/tile/kernel/entry.S index fd8dc42abdc..c3aa0676ed0 100644 --- a/arch/tile/kernel/entry.S +++ b/arch/tile/kernel/entry.S @@ -38,12 +38,6 @@ STD_ENTRY(kernel_execve) jrp lr STD_ENDPROC(kernel_execve) -/* Delay a fixed number of cycles. */ -STD_ENTRY(__delay) - { addi r0, r0, -1; bnzt r0, . } - jrp lr - STD_ENDPROC(__delay) - /* * We don't run this function directly, but instead copy it to a page * we map into every user process. See vdso_setup(). diff --git a/arch/tile/kernel/time.c b/arch/tile/kernel/time.c index f2e156e4469..49a605be94c 100644 --- a/arch/tile/kernel/time.c +++ b/arch/tile/kernel/time.c @@ -224,3 +224,13 @@ int setup_profiling_timer(unsigned int multiplier) { return -EINVAL; } + +/* + * Use the tile timer to convert nsecs to core clock cycles, relying + * on it having the same frequency as SPR_CYCLE. + */ +cycles_t ns2cycles(unsigned long nsecs) +{ + struct clock_event_device *dev = &__get_cpu_var(tile_timer); + return ((u64)nsecs * dev->mult) >> dev->shift; +} diff --git a/arch/tile/lib/delay.c b/arch/tile/lib/delay.c index 5801b03c13e..cdacdd11d36 100644 --- a/arch/tile/lib/delay.c +++ b/arch/tile/lib/delay.c @@ -15,20 +15,31 @@ #include #include #include -#include -#include +#include void __udelay(unsigned long usecs) { - hv_nanosleep(usecs * 1000); + if (usecs > ULONG_MAX / 1000) { + WARN_ON_ONCE(usecs > ULONG_MAX / 1000); + usecs = ULONG_MAX / 1000; + } + __ndelay(usecs * 1000); } EXPORT_SYMBOL(__udelay); void __ndelay(unsigned long nsecs) { - hv_nanosleep(nsecs); + cycles_t target = get_cycles(); + target += ns2cycles(nsecs); + while (get_cycles() < target) + cpu_relax(); } EXPORT_SYMBOL(__ndelay); -/* FIXME: should be declared in a header somewhere. */ +void __delay(unsigned long cycles) +{ + cycles_t target = get_cycles() + cycles; + while (get_cycles() < target) + cpu_relax(); +} EXPORT_SYMBOL(__delay); -- cgit v1.2.3-18-g5258 From b2ce2bdaf942172914a9a39b26065ff7aacdf962 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Mon, 28 Feb 2011 13:24:37 -0500 Subject: arch/tile: stop disabling INTCTRL_1 interrupts during hypervisor downcalls The problem was that this could lead to IPIs being disabled during the softirq processing after a hypervisor downcall (e.g. for I/O), since both IPI and device interrupts use the INCTRL_1 downcall mechanism. When this happened at the wrong time, it could lead to deadlock. Luckily, we were already maintaining the per-interrupt state we need, and using it in the proper way in the hypervisor, so all we had to do was to change Linux to stop blocking downcall interrupts for the entire length of the downcall. (Now they're blocked while we're executing the downcall routine itself, but not while we're executing any subsequent softirq routines.) The hypervisor is doing a very small amount of work it no longer needs to do (masking INTCTRL_1 on entry to the client interrupt routine), but doing so means that older versions of Tile Linux will continue to work with a current hypervisor, so that seems reasonable. Signed-off-by: Chris Metcalf --- arch/tile/kernel/intvec_32.S | 54 ++++---------------------------------------- 1 file changed, 5 insertions(+), 49 deletions(-) (limited to 'arch') diff --git a/arch/tile/kernel/intvec_32.S b/arch/tile/kernel/intvec_32.S index 5eed4a02bf6..abf92f51af4 100644 --- a/arch/tile/kernel/intvec_32.S +++ b/arch/tile/kernel/intvec_32.S @@ -32,10 +32,6 @@ # error "No support for kernel preemption currently" #endif -#if INT_INTCTRL_K < 32 || INT_INTCTRL_K >= 48 -# error INT_INTCTRL_K coded to set high interrupt mask -#endif - #define PTREGS_PTR(reg, ptreg) addli reg, sp, C_ABI_SAVE_AREA_SIZE + (ptreg) #define PTREGS_OFFSET_SYSCALL PTREGS_OFFSET_REG(TREG_SYSCALL_NR) @@ -1198,46 +1194,6 @@ STD_ENTRY(interrupt_return) STD_ENDPROC(interrupt_return) - /* - * This interrupt variant clears the INT_INTCTRL_K interrupt mask bit - * before returning, so we can properly get more downcalls. - */ - .pushsection .text.handle_interrupt_downcall,"ax" -handle_interrupt_downcall: - finish_interrupt_save handle_interrupt_downcall - check_single_stepping normal, .Ldispatch_downcall -.Ldispatch_downcall: - - /* Clear INTCTRL_K from the set of interrupts we ever enable. */ - GET_INTERRUPTS_ENABLED_MASK_PTR(r30) - { - addi r30, r30, 4 - movei r31, INT_MASK(INT_INTCTRL_K) - } - { - lw r20, r30 - nor r21, r31, zero - } - and r20, r20, r21 - sw r30, r20 - - { - jalr r0 - PTREGS_PTR(r0, PTREGS_OFFSET_BASE) - } - FEEDBACK_REENTER(handle_interrupt_downcall) - - /* Allow INTCTRL_K to be enabled next time we enable interrupts. */ - lw r20, r30 - or r20, r20, r31 - sw r30, r20 - - { - movei r30, 0 /* not an NMI */ - j interrupt_return - } - STD_ENDPROC(handle_interrupt_downcall) - /* * Some interrupts don't check for single stepping */ @@ -2014,17 +1970,17 @@ int_unalign: #endif int_hand INT_INTCTRL_0, INTCTRL_0, bad_intr int_hand INT_MESSAGE_RCV_DWNCL, MESSAGE_RCV_DWNCL, \ - hv_message_intr, handle_interrupt_downcall + hv_message_intr int_hand INT_DEV_INTR_DWNCL, DEV_INTR_DWNCL, \ - tile_dev_intr, handle_interrupt_downcall + tile_dev_intr int_hand INT_I_ASID, I_ASID, bad_intr int_hand INT_D_ASID, D_ASID, bad_intr int_hand INT_DMATLB_MISS_DWNCL, DMATLB_MISS_DWNCL, \ - do_page_fault, handle_interrupt_downcall + do_page_fault int_hand INT_SNITLB_MISS_DWNCL, SNITLB_MISS_DWNCL, \ - do_page_fault, handle_interrupt_downcall + do_page_fault int_hand INT_DMATLB_ACCESS_DWNCL, DMATLB_ACCESS_DWNCL, \ - do_page_fault, handle_interrupt_downcall + do_page_fault int_hand INT_SN_CPL, SN_CPL, bad_intr int_hand INT_DOUBLE_FAULT, DOUBLE_FAULT, do_trap #if CHIP_HAS_AUX_PERF_COUNTERS() -- cgit v1.2.3-18-g5258 From bbeee4b2815dd318e9ec9d092d7f79061cc8ba36 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Mon, 28 Feb 2011 13:32:14 -0500 Subject: arch/tile: warn and retry if an IPI is not accepted by the target cpu Previously we assumed this was impossible, but in fact it can happen. Handle it gracefully by retrying after issuing a warning. Signed-off-by: Chris Metcalf --- arch/tile/kernel/smp.c | 33 +++++++++++++++++++-------------- 1 file changed, 19 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/tile/kernel/smp.c b/arch/tile/kernel/smp.c index 9575b37a8b7..a4293102ef8 100644 --- a/arch/tile/kernel/smp.c +++ b/arch/tile/kernel/smp.c @@ -36,6 +36,22 @@ static unsigned long __iomem *ipi_mappings[NR_CPUS]; /* Set by smp_send_stop() to avoid recursive panics. */ static int stopping_cpus; +static void __send_IPI_many(HV_Recipient *recip, int nrecip, int tag) +{ + int sent = 0; + while (sent < nrecip) { + int rc = hv_send_message(recip, nrecip, + (HV_VirtAddr)&tag, sizeof(tag)); + if (rc < 0) { + if (!stopping_cpus) /* avoid recursive panic */ + panic("hv_send_message returned %d", rc); + break; + } + WARN_ONCE(rc == 0, "hv_send_message() returned zero\n"); + sent += rc; + } +} + void send_IPI_single(int cpu, int tag) { HV_Recipient recip = { @@ -43,14 +59,13 @@ void send_IPI_single(int cpu, int tag) .x = cpu % smp_width, .state = HV_TO_BE_SENT }; - int rc = hv_send_message(&recip, 1, (HV_VirtAddr)&tag, sizeof(tag)); - BUG_ON(rc <= 0); + __send_IPI_many(&recip, 1, tag); } void send_IPI_many(const struct cpumask *mask, int tag) { HV_Recipient recip[NR_CPUS]; - int cpu, sent; + int cpu; int nrecip = 0; int my_cpu = smp_processor_id(); for_each_cpu(cpu, mask) { @@ -61,17 +76,7 @@ void send_IPI_many(const struct cpumask *mask, int tag) r->x = cpu % smp_width; r->state = HV_TO_BE_SENT; } - sent = 0; - while (sent < nrecip) { - int rc = hv_send_message(recip, nrecip, - (HV_VirtAddr)&tag, sizeof(tag)); - if (rc <= 0) { - if (!stopping_cpus) /* avoid recursive panic */ - panic("hv_send_message returned %d", rc); - break; - } - sent += rc; - } + __send_IPI_many(recip, nrecip, tag); } void send_IPI_allbutself(int tag) -- cgit v1.2.3-18-g5258 From 9ff27fdbd5d1ffbe2e0a277b4b7bfd0eb8a4bb1c Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Mon, 28 Feb 2011 13:35:16 -0500 Subject: arch/tile: export to userspace This should have been as part of the initial hardwall submission to LKML but was overlooked. The header provides the ioctl definitions for manipulating the hardwall fd, so needs to be available to userspace. Signed-off-by: Chris Metcalf --- arch/tile/include/asm/Kbuild | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/tile/include/asm/Kbuild b/arch/tile/include/asm/Kbuild index 3b8f55b82de..849ab2fa1f5 100644 --- a/arch/tile/include/asm/Kbuild +++ b/arch/tile/include/asm/Kbuild @@ -1,3 +1,4 @@ include include/asm-generic/Kbuild.asm header-y += ucontext.h +header-y += hardwall.h -- cgit v1.2.3-18-g5258 From 401586e9164d225d24bb9d3ddfeb03ef2e931ee3 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Mon, 28 Feb 2011 15:01:53 -0500 Subject: arch/tile: avoid a simulator warning during bootup As the added comment says, we can sometimes see a coherence warning from our simulator if the "swapper_pgprot" variable on the boot cpu has not been evicted from cache by the time the other cpus come up. Force it to be evicted so we never see the warning. Signed-off-by: Chris Metcalf --- arch/tile/mm/init.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/tile/mm/init.c b/arch/tile/mm/init.c index e34597e512d..9a62479aafb 100644 --- a/arch/tile/mm/init.c +++ b/arch/tile/mm/init.c @@ -653,6 +653,17 @@ static void __init kernel_physical_mapping_init(pgd_t *pgd_base) memcpy(pgd_base, pgtables, sizeof(pgtables)); __install_page_table(pgd_base, __get_cpu_var(current_asid), swapper_pgprot); + + /* + * We just read swapper_pgprot and thus brought it into the cache, + * with its new home & caching mode. When we start the other CPUs, + * they're going to reference swapper_pgprot via their initial fake + * VA-is-PA mappings, which cache everything locally. At that + * time, if it's in our cache with a conflicting home, the + * simulator's coherence checker will complain. So, flush it out + * of our cache; we're not going to ever use it again anyway. + */ + __insn_finv(&swapper_pgprot); } /* -- cgit v1.2.3-18-g5258 From ed54d38f0852b2e685393ddae2405d59ef44bed4 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Mon, 28 Feb 2011 15:14:19 -0500 Subject: arch/tile: fix reversed test of strict_strtol() return value This fixes the "initfree" boot argument. Signed-off-by: Chris Metcalf --- arch/tile/mm/init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/tile/mm/init.c b/arch/tile/mm/init.c index 9a62479aafb..2ef9ce5102b 100644 --- a/arch/tile/mm/init.c +++ b/arch/tile/mm/init.c @@ -1000,7 +1000,7 @@ static long __write_once initfree = 1; static int __init set_initfree(char *str) { long val; - if (strict_strtol(str, 0, &val)) { + if (strict_strtol(str, 0, &val) == 0) { initfree = val; pr_info("initfree: %s free init pages\n", initfree ? "will" : "won't"); -- cgit v1.2.3-18-g5258 From a5c149c8a00b247749d0f18c13b130069dcc36e3 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Mon, 28 Feb 2011 15:19:10 -0500 Subject: arch/tile: sync up with and changes These headers are used by Linux but are maintained upstream. This change incorporates a few minor fixes to these headers, including a new sim_print() function, cleaner support for the sim_syscall() API, and a sim_query_cpu_speed() method. Signed-off-by: Chris Metcalf --- arch/tile/include/arch/sim.h | 48 ++++++++++++++++++++++++++++++---------- arch/tile/include/arch/sim_def.h | 3 +++ 2 files changed, 39 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/tile/include/arch/sim.h b/arch/tile/include/arch/sim.h index 74b7c1624d3..e54b7b0527f 100644 --- a/arch/tile/include/arch/sim.h +++ b/arch/tile/include/arch/sim.h @@ -152,16 +152,33 @@ sim_dump(unsigned int mask) /** * Print a string to the simulator stdout. * - * @param str The string to be written; a newline is automatically added. + * @param str The string to be written. + */ +static __inline void +sim_print(const char* str) +{ + for ( ; *str != '\0'; str++) + { + __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_PUTC | + (*str << _SIM_CONTROL_OPERATOR_BITS)); + } + __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_PUTC | + (SIM_PUTC_FLUSH_BINARY << _SIM_CONTROL_OPERATOR_BITS)); +} + + +/** + * Print a string to the simulator stdout. + * + * @param str The string to be written (a newline is automatically added). */ static __inline void sim_print_string(const char* str) { - int i; - for (i = 0; str[i] != 0; i++) + for ( ; *str != '\0'; str++) { __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_PUTC | - (str[i] << _SIM_CONTROL_OPERATOR_BITS)); + (*str << _SIM_CONTROL_OPERATOR_BITS)); } __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_PUTC | (SIM_PUTC_FLUSH_STRING << _SIM_CONTROL_OPERATOR_BITS)); @@ -203,7 +220,7 @@ sim_command(const char* str) * we are passing to the simulator are actually valid in the registers * (i.e. returned from memory) prior to the SIM_CONTROL spr. */ -static __inline int _sim_syscall0(int val) +static __inline long _sim_syscall0(int val) { long result; __asm__ __volatile__ ("mtspr SIM_CONTROL, r0" @@ -211,7 +228,7 @@ static __inline int _sim_syscall0(int val) return result; } -static __inline int _sim_syscall1(int val, long arg1) +static __inline long _sim_syscall1(int val, long arg1) { long result; __asm__ __volatile__ ("{ and zero, r1, r1; mtspr SIM_CONTROL, r0 }" @@ -219,7 +236,7 @@ static __inline int _sim_syscall1(int val, long arg1) return result; } -static __inline int _sim_syscall2(int val, long arg1, long arg2) +static __inline long _sim_syscall2(int val, long arg1, long arg2) { long result; __asm__ __volatile__ ("{ and zero, r1, r2; mtspr SIM_CONTROL, r0 }" @@ -233,7 +250,7 @@ static __inline int _sim_syscall2(int val, long arg1, long arg2) the register values for arguments 3 and up may still be in flight to the core from a stack frame reload. */ -static __inline int _sim_syscall3(int val, long arg1, long arg2, long arg3) +static __inline long _sim_syscall3(int val, long arg1, long arg2, long arg3) { long result; __asm__ __volatile__ ("{ and zero, r3, r3 };" @@ -244,7 +261,7 @@ static __inline int _sim_syscall3(int val, long arg1, long arg2, long arg3) return result; } -static __inline int _sim_syscall4(int val, long arg1, long arg2, long arg3, +static __inline long _sim_syscall4(int val, long arg1, long arg2, long arg3, long arg4) { long result; @@ -256,7 +273,7 @@ static __inline int _sim_syscall4(int val, long arg1, long arg2, long arg3, return result; } -static __inline int _sim_syscall5(int val, long arg1, long arg2, long arg3, +static __inline long _sim_syscall5(int val, long arg1, long arg2, long arg3, long arg4, long arg5) { long result; @@ -268,7 +285,6 @@ static __inline int _sim_syscall5(int val, long arg1, long arg2, long arg3, return result; } - /** * Make a special syscall to the simulator itself, if running under * simulation. This is used as the implementation of other functions @@ -281,7 +297,8 @@ static __inline int _sim_syscall5(int val, long arg1, long arg2, long arg3, */ #define _sim_syscall(syscall_num, nr, args...) \ _sim_syscall##nr( \ - ((syscall_num) << _SIM_CONTROL_OPERATOR_BITS) | SIM_CONTROL_SYSCALL, args) + ((syscall_num) << _SIM_CONTROL_OPERATOR_BITS) | SIM_CONTROL_SYSCALL, \ + ##args) /* Values for the "access_mask" parameters below. */ @@ -365,6 +382,13 @@ sim_validate_lines_evicted(unsigned long long pa, unsigned long length) } +/* Return the current CPU speed in cycles per second. */ +static __inline long +sim_query_cpu_speed(void) +{ + return _sim_syscall(SIM_SYSCALL_QUERY_CPU_SPEED, 0); +} + #endif /* !__DOXYGEN__ */ diff --git a/arch/tile/include/arch/sim_def.h b/arch/tile/include/arch/sim_def.h index 7a17082c377..4b44a2b6a09 100644 --- a/arch/tile/include/arch/sim_def.h +++ b/arch/tile/include/arch/sim_def.h @@ -243,6 +243,9 @@ */ #define SIM_SYSCALL_VALIDATE_LINES_EVICTED 5 +/** Syscall number for sim_query_cpu_speed(). */ +#define SIM_SYSCALL_QUERY_CPU_SPEED 6 + /* * Bit masks which can be shifted by 8, combined with -- cgit v1.2.3-18-g5258 From 0b989cac90144565b8780ddde36e6a927f8ca7ba Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Mon, 28 Feb 2011 15:22:40 -0500 Subject: arch/tile: use a cleaner technique to enable interrupt for cpu_idle() Previously we used iret to atomically return to kernel PL with interrupts enabled. However, it turns out that we are architecturally guaranteed that we can just set and clear the "interrupt critical section" and only interrupt on the following instruction, so we now do that instead, since it's cleaner. Signed-off-by: Chris Metcalf --- arch/tile/kernel/entry.S | 16 +++++----------- 1 file changed, 5 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/tile/kernel/entry.S b/arch/tile/kernel/entry.S index c3aa0676ed0..431e9ae6048 100644 --- a/arch/tile/kernel/entry.S +++ b/arch/tile/kernel/entry.S @@ -91,23 +91,17 @@ STD_ENTRY(smp_nap) /* * Enable interrupts racelessly and then nap until interrupted. + * Architecturally, we are guaranteed that enabling interrupts via + * mtspr to INTERRUPT_CRITICAL_SECTION only interrupts at the next PC. * This function's _cpu_idle_nap address is special; see intvec.S. * When interrupted at _cpu_idle_nap, we bump the PC forward 8, and * as a result return to the function that called _cpu_idle(). */ STD_ENTRY(_cpu_idle) - { - lnk r0 - movei r1, KERNEL_PL - } - { - addli r0, r0, _cpu_idle_nap - . - mtspr INTERRUPT_CRITICAL_SECTION, r1 - } + movei r1, 1 + mtspr INTERRUPT_CRITICAL_SECTION, r1 IRQ_ENABLE(r2, r3) /* unmask, but still with ICS set */ - mtspr SPR_EX_CONTEXT_K_1, r1 /* Kernel PL, ICS clear */ - mtspr SPR_EX_CONTEXT_K_0, r0 - iret + mtspr INTERRUPT_CRITICAL_SECTION, zero .global _cpu_idle_nap _cpu_idle_nap: nap -- cgit v1.2.3-18-g5258 From 6c4d11268819d9c920c7befd8e8e9aad456bb067 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Mon, 28 Feb 2011 15:28:00 -0500 Subject: arch/tile: use extended assembly to inline __mb_incoherent() This avoids having to maintain an additional separate assembly file, and of course the inline is slightly more efficient as well. Signed-off-by: Chris Metcalf --- arch/tile/include/asm/system.h | 19 ++++++++++++++++++- arch/tile/lib/Makefile | 5 ++--- arch/tile/lib/exports.c | 3 --- arch/tile/lib/mb_incoherent.S | 34 ---------------------------------- 4 files changed, 20 insertions(+), 41 deletions(-) delete mode 100644 arch/tile/lib/mb_incoherent.S (limited to 'arch') diff --git a/arch/tile/include/asm/system.h b/arch/tile/include/asm/system.h index 5388850deeb..23d1842f483 100644 --- a/arch/tile/include/asm/system.h +++ b/arch/tile/include/asm/system.h @@ -90,7 +90,24 @@ #endif #if !CHIP_HAS_MF_WAITS_FOR_VICTIMS() -int __mb_incoherent(void); /* Helper routine for mb_incoherent(). */ +#include +/* + * Issue an uncacheable load to each memory controller, then + * wait until those loads have completed. + */ +static inline void __mb_incoherent(void) +{ + long clobber_r10; + asm volatile("swint2" + : "=R10" (clobber_r10) + : "R10" (HV_SYS_fence_incoherent) + : "r0", "r1", "r2", "r3", "r4", + "r5", "r6", "r7", "r8", "r9", + "r11", "r12", "r13", "r14", + "r15", "r16", "r17", "r18", "r19", + "r20", "r21", "r22", "r23", "r24", + "r25", "r26", "r27", "r28", "r29"); +} #endif /* Fence to guarantee visibility of stores to incoherent memory. */ diff --git a/arch/tile/lib/Makefile b/arch/tile/lib/Makefile index 93122d5b155..0c26086ecbe 100644 --- a/arch/tile/lib/Makefile +++ b/arch/tile/lib/Makefile @@ -2,9 +2,8 @@ # Makefile for TILE-specific library files.. # -lib-y = cacheflush.o checksum.o cpumask.o delay.o \ - mb_incoherent.o uaccess.o memmove.o \ - memcpy_$(BITS).o memchr_$(BITS).o memset_$(BITS).o \ +lib-y = cacheflush.o checksum.o cpumask.o delay.o uaccess.o \ + memmove.o memcpy_$(BITS).o memchr_$(BITS).o memset_$(BITS).o \ strchr_$(BITS).o strlen_$(BITS).o ifeq ($(CONFIG_TILEGX),y) diff --git a/arch/tile/lib/exports.c b/arch/tile/lib/exports.c index 1509c559765..ce5dbf56578 100644 --- a/arch/tile/lib/exports.c +++ b/arch/tile/lib/exports.c @@ -45,9 +45,6 @@ EXPORT_SYMBOL(__copy_from_user_zeroing); EXPORT_SYMBOL(__copy_in_user_inatomic); #endif -/* arch/tile/lib/mb_incoherent.S */ -EXPORT_SYMBOL(__mb_incoherent); - /* hypervisor glue */ #include EXPORT_SYMBOL(hv_dev_open); diff --git a/arch/tile/lib/mb_incoherent.S b/arch/tile/lib/mb_incoherent.S deleted file mode 100644 index 989ad7b68d5..00000000000 --- a/arch/tile/lib/mb_incoherent.S +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * Assembly code for invoking the HV's fence_incoherent syscall. - */ - -#include -#include -#include -#include - -#if !CHIP_HAS_MF_WAITS_FOR_VICTIMS() - -/* - * Invoke the hypervisor's fence_incoherent syscall, which guarantees - * that all victims for cachelines homed on this tile have reached memory. - */ -STD_ENTRY(__mb_incoherent) - moveli TREG_SYSCALL_NR_NAME, HV_SYS_fence_incoherent - swint2 - jrp lr - STD_ENDPROC(__mb_incoherent) - -#endif -- cgit v1.2.3-18-g5258 From 3cebbafd28e6f91677f3becffcdf9150b74a4e0c Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Mon, 28 Feb 2011 15:30:16 -0500 Subject: arch/tile: fix two bugs in the backtracer code The first is that we were using an incorrect hand-rolled variant of __kernel_text_address() which didn't handle module PCs. We now just use the standard API. The second was that we weren't accounting for the three-level page table when we were trying to pre-verify the addresses on the 64-bit TILE-Gx processor; we now do that correctly. Signed-off-by: Chris Metcalf --- arch/tile/kernel/stack.c | 28 +++++++++++++++++++--------- 1 file changed, 19 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/tile/kernel/stack.c b/arch/tile/kernel/stack.c index 0d54106be3d..dd81713a90d 100644 --- a/arch/tile/kernel/stack.c +++ b/arch/tile/kernel/stack.c @@ -44,13 +44,6 @@ static int in_kernel_stack(struct KBacktraceIterator *kbt, VirtualAddress sp) return sp >= kstack_base && sp < kstack_base + THREAD_SIZE; } -/* Is address in the specified kernel code? */ -static int in_kernel_text(VirtualAddress address) -{ - return (address >= MEM_SV_INTRPT && - address < MEM_SV_INTRPT + HPAGE_SIZE); -} - /* Is address valid for reading? */ static int valid_address(struct KBacktraceIterator *kbt, VirtualAddress address) { @@ -63,6 +56,23 @@ static int valid_address(struct KBacktraceIterator *kbt, VirtualAddress address) if (l1_pgtable == NULL) return 0; /* can't read user space in other tasks */ +#ifdef CONFIG_64BIT + /* Find the real l1_pgtable by looking in the l0_pgtable. */ + pte = l1_pgtable[HV_L0_INDEX(address)]; + if (!hv_pte_get_present(pte)) + return 0; + pfn = hv_pte_get_pfn(pte); + if (pte_huge(pte)) { + if (!pfn_valid(pfn)) { + pr_err("L0 huge page has bad pfn %#lx\n", pfn); + return 0; + } + return hv_pte_get_present(pte) && hv_pte_get_readable(pte); + } + page = pfn_to_page(pfn); + BUG_ON(PageHighMem(page)); /* No HIGHMEM on 64-bit. */ + l1_pgtable = (HV_PTE *)pfn_to_kaddr(pfn); +#endif pte = l1_pgtable[HV_L1_INDEX(address)]; if (!hv_pte_get_present(pte)) return 0; @@ -92,7 +102,7 @@ static bool read_memory_func(void *result, VirtualAddress address, { int retval; struct KBacktraceIterator *kbt = (struct KBacktraceIterator *)vkbt; - if (in_kernel_text(address)) { + if (__kernel_text_address(address)) { /* OK to read kernel code. */ } else if (address >= PAGE_OFFSET) { /* We only tolerate kernel-space reads of this task's stack */ @@ -132,7 +142,7 @@ static struct pt_regs *valid_fault_handler(struct KBacktraceIterator* kbt) } } if (EX1_PL(p->ex1) == KERNEL_PL && - in_kernel_text(p->pc) && + __kernel_text_address(p->pc) && in_kernel_stack(kbt, p->sp) && p->sp >= sp) { if (kbt->verbose) -- cgit v1.2.3-18-g5258 From 63b7ca6b04427aea9075d6f5f5f15b82e115bce4 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Mon, 28 Feb 2011 15:48:39 -0500 Subject: arch/tile: enhance existing finv_buffer_remote() routine It now takes an additional argument so it can be used to flush-and-invalidate pages that are cached using hash-for-home as well those that are cached with coherence point on a single cpu. This allows it to be used more widely for changing the coherence point of arbitrary pages when necessary. Signed-off-by: Chris Metcalf --- arch/tile/include/asm/cacheflush.h | 55 +++----------------- arch/tile/lib/cacheflush.c | 102 +++++++++++++++++++++++++++++++++++++ arch/tile/mm/homecache.c | 36 +++++++++++-- 3 files changed, 139 insertions(+), 54 deletions(-) (limited to 'arch') diff --git a/arch/tile/include/asm/cacheflush.h b/arch/tile/include/asm/cacheflush.h index 14a3f8556ac..12fb0fb330e 100644 --- a/arch/tile/include/asm/cacheflush.h +++ b/arch/tile/include/asm/cacheflush.h @@ -138,55 +138,12 @@ static inline void finv_buffer(void *buffer, size_t size) } /* - * Flush & invalidate a VA range that is homed remotely on a single core, - * waiting until the memory controller holds the flushed values. + * Flush and invalidate a VA range that is homed remotely, waiting + * until the memory controller holds the flushed values. If "hfh" is + * true, we will do a more expensive flush involving additional loads + * to make sure we have touched all the possible home cpus of a buffer + * that is homed with "hash for home". */ -static inline void finv_buffer_remote(void *buffer, size_t size) -{ - char *p; - int i; - - /* - * Flush and invalidate the buffer out of the local L1/L2 - * and request the home cache to flush and invalidate as well. - */ - __finv_buffer(buffer, size); - - /* - * Wait for the home cache to acknowledge that it has processed - * all the flush-and-invalidate requests. This does not mean - * that the flushed data has reached the memory controller yet, - * but it does mean the home cache is processing the flushes. - */ - __insn_mf(); - - /* - * Issue a load to the last cache line, which can't complete - * until all the previously-issued flushes to the same memory - * controller have also completed. If we weren't striping - * memory, that one load would be sufficient, but since we may - * be, we also need to back up to the last load issued to - * another memory controller, which would be the point where - * we crossed an 8KB boundary (the granularity of striping - * across memory controllers). Keep backing up and doing this - * until we are before the beginning of the buffer, or have - * hit all the controllers. - */ - for (i = 0, p = (char *)buffer + size - 1; - i < (1 << CHIP_LOG_NUM_MSHIMS()) && p >= (char *)buffer; - ++i) { - const unsigned long STRIPE_WIDTH = 8192; - - /* Force a load instruction to issue. */ - *(volatile char *)p; - - /* Jump to end of previous stripe. */ - p -= STRIPE_WIDTH; - p = (char *)((unsigned long)p | (STRIPE_WIDTH - 1)); - } - - /* Wait for the loads (and thus flushes) to have completed. */ - __insn_mf(); -} +void finv_buffer_remote(void *buffer, size_t size, int hfh); #endif /* _ASM_TILE_CACHEFLUSH_H */ diff --git a/arch/tile/lib/cacheflush.c b/arch/tile/lib/cacheflush.c index 11b6164c209..35c1d8ca5f3 100644 --- a/arch/tile/lib/cacheflush.c +++ b/arch/tile/lib/cacheflush.c @@ -21,3 +21,105 @@ void __flush_icache_range(unsigned long start, unsigned long end) { invalidate_icache((const void *)start, end - start, PAGE_SIZE); } + + +/* Force a load instruction to issue. */ +static inline void force_load(char *p) +{ + *(volatile char *)p; +} + +/* + * Flush and invalidate a VA range that is homed remotely on a single + * core (if "!hfh") or homed via hash-for-home (if "hfh"), waiting + * until the memory controller holds the flushed values. + */ +void finv_buffer_remote(void *buffer, size_t size, int hfh) +{ + char *p, *base; + size_t step_size, load_count; + const unsigned long STRIPE_WIDTH = 8192; + + /* + * Flush and invalidate the buffer out of the local L1/L2 + * and request the home cache to flush and invalidate as well. + */ + __finv_buffer(buffer, size); + + /* + * Wait for the home cache to acknowledge that it has processed + * all the flush-and-invalidate requests. This does not mean + * that the flushed data has reached the memory controller yet, + * but it does mean the home cache is processing the flushes. + */ + __insn_mf(); + + /* + * Issue a load to the last cache line, which can't complete + * until all the previously-issued flushes to the same memory + * controller have also completed. If we weren't striping + * memory, that one load would be sufficient, but since we may + * be, we also need to back up to the last load issued to + * another memory controller, which would be the point where + * we crossed an 8KB boundary (the granularity of striping + * across memory controllers). Keep backing up and doing this + * until we are before the beginning of the buffer, or have + * hit all the controllers. + * + * If we are flushing a hash-for-home buffer, it's even worse. + * Each line may be homed on a different tile, and each tile + * may have up to four lines that are on different + * controllers. So as we walk backwards, we have to touch + * enough cache lines to satisfy these constraints. In + * practice this ends up being close enough to "load from + * every cache line on a full memory stripe on each + * controller" that we simply do that, to simplify the logic. + * + * FIXME: See bug 9535 for some issues with this code. + */ + if (hfh) { + step_size = L2_CACHE_BYTES; + load_count = (STRIPE_WIDTH / L2_CACHE_BYTES) * + (1 << CHIP_LOG_NUM_MSHIMS()); + } else { + step_size = STRIPE_WIDTH; + load_count = (1 << CHIP_LOG_NUM_MSHIMS()); + } + + /* Load the last byte of the buffer. */ + p = (char *)buffer + size - 1; + force_load(p); + + /* Bump down to the end of the previous stripe or cache line. */ + p -= step_size; + p = (char *)((unsigned long)p | (step_size - 1)); + + /* Figure out how far back we need to go. */ + base = p - (step_size * (load_count - 2)); + if ((long)base < (long)buffer) + base = buffer; + + /* + * Fire all the loads we need. The MAF only has eight entries + * so we can have at most eight outstanding loads, so we + * unroll by that amount. + */ +#pragma unroll 8 + for (; p >= base; p -= step_size) + force_load(p); + + /* + * Repeat, but with inv's instead of loads, to get rid of the + * data we just loaded into our own cache and the old home L3. + * No need to unroll since inv's don't target a register. + */ + p = (char *)buffer + size - 1; + __insn_inv(p); + p -= step_size; + p = (char *)((unsigned long)p | (step_size - 1)); + for (; p >= base; p -= step_size) + __insn_inv(p); + + /* Wait for the load+inv's (and thus finvs) to have completed. */ + __insn_mf(); +} diff --git a/arch/tile/mm/homecache.c b/arch/tile/mm/homecache.c index d78df3a6ee1..f344f4fc734 100644 --- a/arch/tile/mm/homecache.c +++ b/arch/tile/mm/homecache.c @@ -179,23 +179,46 @@ void flush_remote(unsigned long cache_pfn, unsigned long cache_control, panic("Unsafe to continue."); } +void flush_remote_page(struct page *page, int order) +{ + int i, pages = (1 << order); + for (i = 0; i < pages; ++i, ++page) { + void *p = kmap_atomic(page); + int hfh = 0; + int home = page_home(page); +#if CHIP_HAS_CBOX_HOME_MAP() + if (home == PAGE_HOME_HASH) + hfh = 1; + else +#endif + BUG_ON(home < 0 || home >= NR_CPUS); + finv_buffer_remote(p, PAGE_SIZE, hfh); + kunmap_atomic(p); + } +} + void homecache_evict(const struct cpumask *mask) { flush_remote(0, HV_FLUSH_EVICT_L2, mask, 0, 0, 0, NULL, NULL, 0); } -/* Return a mask of the cpus whose caches currently own these pages. */ -static void homecache_mask(struct page *page, int pages, - struct cpumask *home_mask) +/* + * Return a mask of the cpus whose caches currently own these pages. + * The return value is whether the pages are all coherently cached + * (i.e. none are immutable, incoherent, or uncached). + */ +static int homecache_mask(struct page *page, int pages, + struct cpumask *home_mask) { int i; + int cached_coherently = 1; cpumask_clear(home_mask); for (i = 0; i < pages; ++i) { int home = page_home(&page[i]); if (home == PAGE_HOME_IMMUTABLE || home == PAGE_HOME_INCOHERENT) { cpumask_copy(home_mask, cpu_possible_mask); - return; + return 0; } #if CHIP_HAS_CBOX_HOME_MAP() if (home == PAGE_HOME_HASH) { @@ -203,11 +226,14 @@ static void homecache_mask(struct page *page, int pages, continue; } #endif - if (home == PAGE_HOME_UNCACHED) + if (home == PAGE_HOME_UNCACHED) { + cached_coherently = 0; continue; + } BUG_ON(home < 0 || home >= NR_CPUS); cpumask_set_cpu(home, home_mask); } + return cached_coherently; } /* -- cgit v1.2.3-18-g5258 From 00dce03134689a257120ae2aa18ba7d1a736bef7 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Mon, 28 Feb 2011 15:51:25 -0500 Subject: arch/tile: export some additional module symbols This adds a grab bag of symbols that have been missing for various modules. Signed-off-by: Chris Metcalf --- arch/tile/lib/exports.c | 7 +++++++ arch/tile/mm/init.c | 1 + 2 files changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/tile/lib/exports.c b/arch/tile/lib/exports.c index ce5dbf56578..49284fae9d0 100644 --- a/arch/tile/lib/exports.c +++ b/arch/tile/lib/exports.c @@ -29,6 +29,9 @@ EXPORT_SYMBOL(__put_user_8); EXPORT_SYMBOL(strnlen_user_asm); EXPORT_SYMBOL(strncpy_from_user_asm); EXPORT_SYMBOL(clear_user_asm); +EXPORT_SYMBOL(flush_user_asm); +EXPORT_SYMBOL(inv_user_asm); +EXPORT_SYMBOL(finv_user_asm); /* arch/tile/kernel/entry.S */ #include @@ -82,4 +85,8 @@ int64_t __muldi3(int64_t, int64_t); EXPORT_SYMBOL(__muldi3); uint64_t __lshrdi3(uint64_t, unsigned int); EXPORT_SYMBOL(__lshrdi3); +uint64_t __ashrdi3(uint64_t, unsigned int); +EXPORT_SYMBOL(__ashrdi3); +uint64_t __ashldi3(uint64_t, unsigned int); +EXPORT_SYMBOL(__ashldi3); #endif diff --git a/arch/tile/mm/init.c b/arch/tile/mm/init.c index 2ef9ce5102b..f89ed5dc08d 100644 --- a/arch/tile/mm/init.c +++ b/arch/tile/mm/init.c @@ -69,6 +69,7 @@ #ifndef __tilegx__ unsigned long VMALLOC_RESERVE = CONFIG_VMALLOC_RESERVE; +EXPORT_SYMBOL(VMALLOC_RESERVE); #endif DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); -- cgit v1.2.3-18-g5258 From 44e69767cb7c3bc46e5370c39532c205d4347d80 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Tue, 1 Mar 2011 20:05:49 +0000 Subject: xen: ia64 build broken due to "xen: switch to new schedop hypercall by default." The git commit: > commit a8b7458363b9174f3c2196ca6085630b4b30b7a1 > Author: Ian Campbell > Date: Thu Feb 17 11:04:20 2011 +0000 > > xen: switch to new schedop hypercall by default. > > Rename old interface to sched_op_compat and rename sched_op_new to > simply sched_op. > breaks the IA64 build. This patch fixes it. Signed-off-by: Tony Luck Signed-off-by: Ian Campbell Signed-off-by: Konrad Rzeszutek Wilk --- arch/ia64/include/asm/xen/hypercall.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/include/asm/xen/hypercall.h b/arch/ia64/include/asm/xen/hypercall.h index 96fc62366aa..ed28bcd5bb8 100644 --- a/arch/ia64/include/asm/xen/hypercall.h +++ b/arch/ia64/include/asm/xen/hypercall.h @@ -107,7 +107,7 @@ extern unsigned long __hypercall(unsigned long a1, unsigned long a2, static inline int xencomm_arch_hypercall_sched_op(int cmd, struct xencomm_handle *arg) { - return _hypercall2(int, sched_op_new, cmd, arg); + return _hypercall2(int, sched_op, cmd, arg); } static inline long -- cgit v1.2.3-18-g5258 From 1a9f5e89d67855385ed42b7b71167e2d3a39507a Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Tue, 8 Feb 2011 14:30:31 -0700 Subject: omap4: clockdomain: Fix the CPUx domain name The register naming convention for clock domain control inside power domain instance is: OMAPXXXX____CDOFFS Both CPU0 and CPU1 use MPU as clock domain name instead of CPU0 and CPU1. Change the name to stick to the convention. The autogen scripts are updated accordingly. Signed-off-by: Benoit Cousson Signed-off-by: Santosh Shilimkar Cc: Paul Walmsley Cc: Rajendra Nayak Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clockdomains44xx_data.c | 4 ++-- arch/arm/mach-omap2/prcm_mpu44xx.h | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c index 10622c914ab..3d1c06b1676 100644 --- a/arch/arm/mach-omap2/clockdomains44xx_data.c +++ b/arch/arm/mach-omap2/clockdomains44xx_data.c @@ -150,7 +150,7 @@ static struct clockdomain mpu0_44xx_clkdm = { .pwrdm = { .name = "cpu0_pwrdm" }, .prcm_partition = OMAP4430_PRCM_MPU_PARTITION, .cm_inst = OMAP4430_PRCM_MPU_CPU0_INST, - .clkdm_offs = OMAP4430_PRCM_MPU_CPU0_MPU_CDOFFS, + .clkdm_offs = OMAP4430_PRCM_MPU_CPU0_CPU0_CDOFFS, .flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; @@ -160,7 +160,7 @@ static struct clockdomain mpu1_44xx_clkdm = { .pwrdm = { .name = "cpu1_pwrdm" }, .prcm_partition = OMAP4430_PRCM_MPU_PARTITION, .cm_inst = OMAP4430_PRCM_MPU_CPU1_INST, - .clkdm_offs = OMAP4430_PRCM_MPU_CPU1_MPU_CDOFFS, + .clkdm_offs = OMAP4430_PRCM_MPU_CPU1_CPU1_CDOFFS, .flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; diff --git a/arch/arm/mach-omap2/prcm_mpu44xx.h b/arch/arm/mach-omap2/prcm_mpu44xx.h index 3300ff6e3cf..d22d1b43bcc 100644 --- a/arch/arm/mach-omap2/prcm_mpu44xx.h +++ b/arch/arm/mach-omap2/prcm_mpu44xx.h @@ -38,8 +38,8 @@ #define OMAP4430_PRCM_MPU_CPU1_INST 0x0800 /* PRCM_MPU clockdomain register offsets (from instance start) */ -#define OMAP4430_PRCM_MPU_CPU0_MPU_CDOFFS 0x0018 -#define OMAP4430_PRCM_MPU_CPU1_MPU_CDOFFS 0x0018 +#define OMAP4430_PRCM_MPU_CPU0_CPU0_CDOFFS 0x0018 +#define OMAP4430_PRCM_MPU_CPU1_CPU1_CDOFFS 0x0018 /* -- cgit v1.2.3-18-g5258 From 3ed4566ed2146ff8ac1cbaf2babdf04e50b66648 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Fri, 25 Feb 2011 15:21:17 -0700 Subject: omap4: powerdomain: Use intended PWRSTS_* flags instead of values IVAHD and ABE power domain logic state is populated using directly value instead of the capability flags. Fix the same. Signed-off-by: Santosh Shilimkar [paul@pwsan.com: updated to apply at a different point on the tree] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/powerdomains44xx_data.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/powerdomains44xx_data.c b/arch/arm/mach-omap2/powerdomains44xx_data.c index 26d7641076d..226e01aac9e 100644 --- a/arch/arm/mach-omap2/powerdomains44xx_data.c +++ b/arch/arm/mach-omap2/powerdomains44xx_data.c @@ -80,7 +80,7 @@ static struct powerdomain abe_44xx_pwrdm = { .prcm_partition = OMAP4430_PRM_PARTITION, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), .pwrsts = PWRSTS_OFF_RET_ON, - .pwrsts_logic_ret = PWRDM_POWER_OFF, + .pwrsts_logic_ret = PWRSTS_OFF, .banks = 2, .pwrsts_mem_ret = { [0] = PWRDM_POWER_RET, /* aessmem */ @@ -227,7 +227,7 @@ static struct powerdomain ivahd_44xx_pwrdm = { .prcm_partition = OMAP4430_PRM_PARTITION, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), .pwrsts = PWRSTS_OFF_RET_ON, - .pwrsts_logic_ret = PWRDM_POWER_OFF, + .pwrsts_logic_ret = PWRSTS_OFF, .banks = 4, .pwrsts_mem_ret = { [0] = PWRDM_POWER_OFF, /* hwa_mem */ -- cgit v1.2.3-18-g5258 From da0653fe01cd4c6ed402a94752b78be62cb39282 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Fri, 25 Feb 2011 15:40:21 -0700 Subject: OMAP2+: omap_device/clock: Do not expect an entry in clkdev for opt_clks The _add_optional_clock_alias function expects an entry already existing in the clkdev table in the form of which might not be the case always. Instead, just check if an entry already exists in clkdev in the form, else go ahead and add one. Remove any assumption of an entry already existing in clkdev table in any form. Since this means, adding a new entry in clkdev if it does not already exist, and not really adding an 'alias', also rename the function name (s/_add_optional_clock_alias/_add_optional_clock_clkdev) to reflect this. Signed-off-by: Rajendra Nayak Reported-by: Sumit Semwal Cc: Sumit Semwal Cc: Paul Walmsley Cc: Benoit Cousson Cc: Kevin Hilman Cc: Partha Basak Signed-off-by: Paul Walmsley --- arch/arm/plat-omap/omap_device.c | 36 ++++++++++++++++++++++++++---------- 1 file changed, 26 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index 57adb270767..9bbda9acb73 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -83,9 +83,11 @@ #include #include #include +#include #include #include +#include /* These parameters are passed to _omap_device_{de,}activate() */ #define USE_WAKEUP_LAT 0 @@ -239,12 +241,12 @@ static inline struct omap_device *_find_by_pdev(struct platform_device *pdev) } /** - * _add_optional_clock_alias - Add clock alias for hwmod optional clocks + * _add_optional_clock_clkdev - Add clkdev entry for hwmod optional clocks * @od: struct omap_device *od * * For every optional clock present per hwmod per omap_device, this function - * adds an entry in the clocks list of the form - * if an entry is already present in it with the form + * adds an entry in the clkdev table of the form + * if it does not exist already. * * The function is called from inside omap_device_build_ss(), after * omap_device_register. @@ -254,25 +256,39 @@ static inline struct omap_device *_find_by_pdev(struct platform_device *pdev) * * No return value. */ -static void _add_optional_clock_alias(struct omap_device *od, +static void _add_optional_clock_clkdev(struct omap_device *od, struct omap_hwmod *oh) { int i; for (i = 0; i < oh->opt_clks_cnt; i++) { struct omap_hwmod_opt_clk *oc; - int r; + struct clk *r; + struct clk_lookup *l; oc = &oh->opt_clks[i]; if (!oc->_clk) continue; - r = clk_add_alias(oc->role, dev_name(&od->pdev.dev), - (char *)oc->clk, &od->pdev.dev); - if (r) - pr_err("omap_device: %s: clk_add_alias for %s failed\n", + r = clk_get_sys(dev_name(&od->pdev.dev), oc->role); + if (!IS_ERR(r)) + continue; /* clkdev entry exists */ + + r = omap_clk_get_by_name((char *)oc->clk); + if (IS_ERR(r)) { + pr_err("omap_device: %s: omap_clk_get_by_name for %s failed\n", + dev_name(&od->pdev.dev), oc->clk); + continue; + } + + l = clkdev_alloc(r, oc->role, dev_name(&od->pdev.dev)); + if (!l) { + pr_err("omap_device: %s: clkdev_alloc for %s failed\n", dev_name(&od->pdev.dev), oc->role); + return; + } + clkdev_add(l); } } @@ -480,7 +496,7 @@ struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id, for (i = 0; i < oh_cnt; i++) { hwmods[i]->od = od; - _add_optional_clock_alias(od, hwmods[i]); + _add_optional_clock_clkdev(od, hwmods[i]); } if (ret) -- cgit v1.2.3-18-g5258 From ac818314499b707a97690d5ee835e6ba40a407c1 Mon Sep 17 00:00:00 2001 From: Neil Brown Date: Wed, 24 Nov 2010 11:28:01 +1100 Subject: [CPUFREQ] Missing "unregister_cpu_notifier" in powernow-k8.c It appears that when powernow-k8 finds that No compatible ACPI _PSS objects found. and suggests Try again with latest BIOS. it fails the module load, but does not unregister the cpu_notifier that was registered in powernowk8_init This ends up leaving freed memory on the cpu notifier list for some other poor module (e.g. md/raid5) to come along and trip over. The following might be a partial fix, but I suspect there is probably other clean-up that is needed. ( https://bugzilla.novell.com/show_bug.cgi?id=655215 has full dmesg traces). Signed-off-by: Dave Jones Signed-off-by: Neil Brown --- arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index 35c7e65e59b..302963fb4dc 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -1537,6 +1537,7 @@ static struct notifier_block cpb_nb = { static int __cpuinit powernowk8_init(void) { unsigned int i, supported_cpus = 0, cpu; + int rv; for_each_online_cpu(i) { int rc; @@ -1574,7 +1575,13 @@ static int __cpuinit powernowk8_init(void) (cpb_enabled ? "on" : "off")); } - return cpufreq_register_driver(&cpufreq_amd64_driver); + rv = cpufreq_register_driver(&cpufreq_amd64_driver); + if (rv < 0 && boot_cpu_has(X86_FEATURE_CPB)) { + unregister_cpu_notifier(&cpb_nb); + msrs_free(msrs); + msrs = NULL; + } + return rv; } /* driver entry point for term */ -- cgit v1.2.3-18-g5258 From a536b126f211bdf9a0eecce0d403a26900d2106c Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Tue, 23 Nov 2010 21:29:31 -0500 Subject: [CPUFREQ] Fix another notifier leak in powernow-k8. Do the notifier registration later, so we don't have to worry about freeing it if we fail the msr allocation. Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index 302963fb4dc..c567dec854f 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -1556,14 +1556,14 @@ static int __cpuinit powernowk8_init(void) cpb_capable = true; - register_cpu_notifier(&cpb_nb); - msrs = msrs_alloc(); if (!msrs) { printk(KERN_ERR "%s: Error allocating msrs!\n", __func__); return -ENOMEM; } + register_cpu_notifier(&cpb_nb); + rdmsr_on_cpus(cpu_online_mask, MSR_K7_HWCR, msrs); for_each_cpu(cpu, cpu_online_mask) { -- cgit v1.2.3-18-g5258 From 853cee26e2a0c5f97386beca4c67b11c3cd85b8e Mon Sep 17 00:00:00 2001 From: Naga Chumbalkar Date: Tue, 15 Feb 2011 17:44:11 +0000 Subject: [CPUFREQ] p4-clockmod: print EST-capable warning message only once Print the message only once. I see it 16 times on a 2P box with 16 logical CPUs. Signed-off-by: Naga Chumbalkar --- arch/x86/kernel/cpu/cpufreq/p4-clockmod.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c index bd1cac747f6..52c93648e49 100644 --- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c +++ b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c @@ -158,9 +158,9 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c) { if (c->x86 == 0x06) { if (cpu_has(c, X86_FEATURE_EST)) - printk(KERN_WARNING PFX "Warning: EST-capable CPU " - "detected. The acpi-cpufreq module offers " - "voltage scaling in addition of frequency " + printk_once(KERN_WARNING PFX "Warning: EST-capable " + "CPU detected. The acpi-cpufreq module offers " + "voltage scaling in addition to frequency " "scaling. You should use that instead of " "p4-clockmod, if possible.\n"); switch (c->x86_model) { -- cgit v1.2.3-18-g5258 From 6670e9cdaf554290e26121aa72f0118f2fac52e5 Mon Sep 17 00:00:00 2001 From: Daniel J Blueman Date: Wed, 23 Feb 2011 09:33:59 +0800 Subject: x86, build: Make sure mkpiggy fails on read error Ensure build doesn't silently continue despite read failure, addressing a warning due to the unchecked call. Signed-off-by: Daniel J Blueman LKML-Reference: Signed-off-by: H. Peter Anvin --- arch/x86/boot/compressed/mkpiggy.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/boot/compressed/mkpiggy.c b/arch/x86/boot/compressed/mkpiggy.c index 646aa78ba5f..46a82388243 100644 --- a/arch/x86/boot/compressed/mkpiggy.c +++ b/arch/x86/boot/compressed/mkpiggy.c @@ -62,7 +62,12 @@ int main(int argc, char *argv[]) if (fseek(f, -4L, SEEK_END)) { perror(argv[1]); } - fread(&olen, sizeof olen, 1, f); + + if (fread(&olen, sizeof(olen), 1, f) != 1) { + perror(argv[1]); + return 1; + } + ilen = ftell(f); olen = getle32(&olen); fclose(f); -- cgit v1.2.3-18-g5258 From a580b8c5429a624d120cd603e1498bf676e2b4da Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sun, 27 Feb 2011 00:47:42 +0800 Subject: dmaengine: mxs-dma: add dma support for i.MX23/28 This patch adds dma support for Freescale MXS-based SoC i.MX23/28, including apbh-dma and apbx-dma. * apbh-dma and apbx-dma are supported in the driver as two mxs-dma instances. * apbh-dma is different between mx23 and mx28, hardware version register is used to differentiate. * mxs-dma supports pio function besides data transfer. The driver uses dma_data_direction DMA_NONE to identify the pio mode, and steals sgl and sg_len to get pio words and numbers from clients. * mxs dmaengine has some very specific features, like sense function and the special NAND support (nand_lock, nand_wait4ready). These are too specific to implemented in generic dmaengine driver. * The driver refers to imx-sdma and only a single descriptor is statically assigned to each channel. Signed-off-by: Shawn Guo Signed-off-by: Vinod Koul --- arch/arm/mach-mxs/include/mach/dma.h | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 arch/arm/mach-mxs/include/mach/dma.h (limited to 'arch') diff --git a/arch/arm/mach-mxs/include/mach/dma.h b/arch/arm/mach-mxs/include/mach/dma.h new file mode 100644 index 00000000000..7f4aeeaba8d --- /dev/null +++ b/arch/arm/mach-mxs/include/mach/dma.h @@ -0,0 +1,26 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_MXS_DMA_H__ +#define __MACH_MXS_DMA_H__ + +struct mxs_dma_data { + int chan_irq; +}; + +static inline int mxs_dma_is_apbh(struct dma_chan *chan) +{ + return !strcmp(dev_name(chan->device->dev), "mxs-dma-apbh"); +} + +static inline int mxs_dma_is_apbx(struct dma_chan *chan) +{ + return !strcmp(dev_name(chan->device->dev), "mxs-dma-apbx"); +} + +#endif /* __MACH_MXS_DMA_H__ */ -- cgit v1.2.3-18-g5258 From f342552b917a18a7a1fa2c10625df85fac828c36 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 24 Feb 2011 10:47:32 +0000 Subject: powerpc/mm: Make hpte_need_flush() safe for preemption hpte_need_flush() might be called outside of a preempt section when manipulating the kernel page tables, so we need to use the appopriate variants of per-cpu variable accesses. There should be no risk of being in the middle of a batch and a context switch will flush any pending batch. [Patch extracted from a larger patch in Peter's preemptible mmu_gather series] Signed-off-by: Peter Zijlstra Signed-off-by: Hugh Dickins Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/tlb_hash64.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c index 1ec06576f61..c14d09f614f 100644 --- a/arch/powerpc/mm/tlb_hash64.c +++ b/arch/powerpc/mm/tlb_hash64.c @@ -38,13 +38,11 @@ DEFINE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch); * neesd to be flushed. This function will either perform the flush * immediately or will batch it up if the current CPU has an active * batch on it. - * - * Must be called from within some kind of spinlock/non-preempt region... */ void hpte_need_flush(struct mm_struct *mm, unsigned long addr, pte_t *ptep, unsigned long pte, int huge) { - struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch); + struct ppc64_tlb_batch *batch = &get_cpu_var(ppc64_tlb_batch); unsigned long vsid, vaddr; unsigned int psize; int ssize; @@ -99,6 +97,7 @@ void hpte_need_flush(struct mm_struct *mm, unsigned long addr, */ if (!batch->active) { flush_hash_page(vaddr, rpte, psize, ssize, 0); + put_cpu_var(ppc64_tlb_batch); return; } @@ -127,6 +126,7 @@ void hpte_need_flush(struct mm_struct *mm, unsigned long addr, batch->index = ++i; if (i >= PPC64_TLB_BATCH_NR) __flush_tlb_pending(batch); + put_cpu_var(ppc64_tlb_batch); } /* -- cgit v1.2.3-18-g5258 From 357574c48260c9177803a23b881d0af535670ec0 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Wed, 23 Feb 2011 12:46:16 +0000 Subject: powerpc/kexec: Restore ppc_md.machine_kexec Kyle Moffett points out that mpc85xx has started using the ppc_md.machine_kexec hook. As such, revert patch c94868788cf2 (powerpc/kexec: Remove ppc_md.machine_kexec). Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/machdep.h | 6 ++++++ arch/powerpc/kernel/machine_kexec.c | 5 ++++- 2 files changed, 10 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h index 991d5998d6b..fe56a23e1ff 100644 --- a/arch/powerpc/include/asm/machdep.h +++ b/arch/powerpc/include/asm/machdep.h @@ -240,6 +240,12 @@ struct machdep_calls { * claims to support kexec. */ int (*machine_kexec_prepare)(struct kimage *image); + + /* Called to perform the _real_ kexec. + * Do NOT allocate memory or fail here. We are past the point of + * no return. + */ + void (*machine_kexec)(struct kimage *image); #endif /* CONFIG_KEXEC */ #ifdef CONFIG_SUSPEND diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c index 49a170af814..a5f8672eeff 100644 --- a/arch/powerpc/kernel/machine_kexec.c +++ b/arch/powerpc/kernel/machine_kexec.c @@ -87,7 +87,10 @@ void machine_kexec(struct kimage *image) save_ftrace_enabled = __ftrace_enabled_save(); - default_machine_kexec(image); + if (ppc_md.machine_kexec) + ppc_md.machine_kexec(image); + else + default_machine_kexec(image); __ftrace_enabled_restore(save_ftrace_enabled); -- cgit v1.2.3-18-g5258 From e0780b720f75487911e0174ec3dec2da49f7bbfa Mon Sep 17 00:00:00 2001 From: "K.Prasad" Date: Thu, 10 Feb 2011 04:44:35 +0000 Subject: powerpc: Fix call to flush_ptrace_hw_breakpoint() Fix the error in spelling the config option for hw-breakpoints and fix the build issue that follows. Signed-off by: K.Prasad Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/process.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 7a1d5cb7693..8303a6c65ef 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -353,6 +353,7 @@ static void switch_booke_debug_regs(struct thread_struct *new_thread) prime_debug_regs(new_thread); } #else /* !CONFIG_PPC_ADV_DEBUG_REGS */ +#ifndef CONFIG_HAVE_HW_BREAKPOINT static void set_debug_reg_defaults(struct thread_struct *thread) { if (thread->dabr) { @@ -360,6 +361,7 @@ static void set_debug_reg_defaults(struct thread_struct *thread) set_dabr(0); } } +#endif /* !CONFIG_HAVE_HW_BREAKPOINT */ #endif /* CONFIG_PPC_ADV_DEBUG_REGS */ int set_dabr(unsigned long dabr) @@ -670,11 +672,11 @@ void flush_thread(void) { discard_lazy_cpu_state(); -#ifdef CONFIG_HAVE_HW_BREAKPOINTS +#ifdef CONFIG_HAVE_HW_BREAKPOINT flush_ptrace_hw_breakpoint(current); -#else /* CONFIG_HAVE_HW_BREAKPOINTS */ +#else /* CONFIG_HAVE_HW_BREAKPOINT */ set_debug_reg_defaults(¤t->thread); -#endif /* CONFIG_HAVE_HW_BREAKPOINTS */ +#endif /* CONFIG_HAVE_HW_BREAKPOINT */ } void -- cgit v1.2.3-18-g5258 From ae39573a19e35122bd431a4f5c889823209168c7 Mon Sep 17 00:00:00 2001 From: Nicolas Kaiser Date: Fri, 22 Oct 2010 02:58:53 +0000 Subject: powerpc/mv64x60: Suspected typo in assignment Untested, but looks like an obvious typo to me. [BenH: No feedback, but it's obviously wrong] Signed-off-by: Nicolas Kaiser Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/sysdev/mv64x60_dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/sysdev/mv64x60_dev.c b/arch/powerpc/sysdev/mv64x60_dev.c index feaee402e2d..0f6af41ebb4 100644 --- a/arch/powerpc/sysdev/mv64x60_dev.c +++ b/arch/powerpc/sysdev/mv64x60_dev.c @@ -346,7 +346,7 @@ static int __init mv64x60_i2c_device_setup(struct device_node *np, int id) if (prop) pdata.freq_m = *prop; - pdata.freq_m = 3; /* default */ + pdata.freq_n = 3; /* default */ prop = of_get_property(np, "freq_n", NULL); if (prop) pdata.freq_n = *prop; -- cgit v1.2.3-18-g5258 From 7e26065d8b11babc948262b92cd989fcc7062653 Mon Sep 17 00:00:00 2001 From: Prarit Bhargava Date: Thu, 13 Jan 2011 04:09:01 +0000 Subject: powerpc/pseries: Cleanup use of notifier_from_errno() Minor cleanup of notifier_from_errno() in powerpc. notifier_from_errno() now contains the if(ret)/else conditional. There is no need to do it in the powerpc code. Signed-off-by: Prarit Bhargava Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/cmm.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/cmm.c b/arch/powerpc/platforms/pseries/cmm.c index f4803868642..3cafc306b97 100644 --- a/arch/powerpc/platforms/pseries/cmm.c +++ b/arch/powerpc/platforms/pseries/cmm.c @@ -508,12 +508,7 @@ static int cmm_memory_isolate_cb(struct notifier_block *self, if (action == MEM_ISOLATE_COUNT) ret = cmm_count_pages(arg); - if (ret) - ret = notifier_from_errno(ret); - else - ret = NOTIFY_OK; - - return ret; + return notifier_from_errno(ret); } static struct notifier_block cmm_mem_isolate_nb = { @@ -635,12 +630,7 @@ static int cmm_memory_cb(struct notifier_block *self, break; } - if (ret) - ret = notifier_from_errno(ret); - else - ret = NOTIFY_OK; - - return ret; + return notifier_from_errno(ret); } static struct notifier_block cmm_mem_nb = { -- cgit v1.2.3-18-g5258 From 089fb442f3018a3ed094f8ac7a7cc2d3bd03b114 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 21 Jan 2011 06:12:28 +0000 Subject: powerpc: Use ARCH_IRQ_INIT_FLAGS Define the ARCH_IRQ_INIT_FLAGS instead of fixing it up in a loop. Signed-off-by: Thomas Gleixner Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/hw_irq.h | 2 ++ arch/powerpc/kernel/irq.c | 15 --------------- 2 files changed, 2 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h index ff08b70b36d..bb712c9488b 100644 --- a/arch/powerpc/include/asm/hw_irq.h +++ b/arch/powerpc/include/asm/hw_irq.h @@ -141,6 +141,8 @@ static inline bool arch_irqs_disabled(void) #endif /* CONFIG_PPC64 */ +#define ARCH_IRQ_INIT_FLAGS IRQ_NOREQUEST + /* * interrupt-retrigger: should we handle this via lost interrupts and IPIs * or should we not care like we do now ? --BenH. diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index ce557f6f00f..0531ccda800 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -1074,21 +1074,6 @@ void irq_free_virt(unsigned int virq, unsigned int count) int arch_early_irq_init(void) { - struct irq_desc *desc; - int i; - - for (i = 0; i < NR_IRQS; i++) { - desc = irq_to_desc(i); - if (desc) - desc->status |= IRQ_NOREQUEST; - } - - return 0; -} - -int arch_init_chip_data(struct irq_desc *desc, int node) -{ - desc->status |= IRQ_NOREQUEST; return 0; } -- cgit v1.2.3-18-g5258 From a9d8946b4af9e003c645ffb46489fdeb154e7ed9 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 21 Jan 2011 06:12:30 +0000 Subject: powerpc: Use new irq allocator Use the new functions and free the descriptor when the virq is destroyed. Signed-off-by: Thomas Gleixner Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/irq.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 0531ccda800..8a958ca26ac 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -678,16 +678,15 @@ void irq_set_virq_count(unsigned int count) static int irq_setup_virq(struct irq_host *host, unsigned int virq, irq_hw_number_t hwirq) { - struct irq_desc *desc; + int res; - desc = irq_to_desc_alloc_node(virq, 0); - if (!desc) { + res = irq_alloc_desc_at(virq, 0); + if (res != virq) { pr_debug("irq: -> allocating desc failed\n"); goto error; } - /* Clear IRQ_NOREQUEST flag */ - desc->status &= ~IRQ_NOREQUEST; + irq_clear_status_flags(virq, IRQ_NOREQUEST); /* map it */ smp_wmb(); @@ -696,11 +695,13 @@ static int irq_setup_virq(struct irq_host *host, unsigned int virq, if (host->ops->map(host, virq, hwirq)) { pr_debug("irq: -> mapping failed, freeing\n"); - goto error; + goto errdesc; } return 0; +errdesc: + irq_free_descs(virq, 1); error: irq_free_virt(virq, 1); return -1; @@ -879,9 +880,9 @@ void irq_dispose_mapping(unsigned int virq) smp_mb(); irq_map[virq].hwirq = host->inval_irq; - /* Set some flags */ - irq_to_desc(virq)->status |= IRQ_NOREQUEST; + irq_set_status_flags(virq, IRQ_NOREQUEST); + irq_free_descs(virq, 1); /* Free it */ irq_free_virt(virq, 1); } -- cgit v1.2.3-18-g5258 From fe3cc0d99de6a9bf99b6c279a8afb5833888c1f7 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Mon, 28 Feb 2011 20:00:47 +0000 Subject: powerpc: Add pgprot_writecombine A number of drivers are using pgprot_writecombine() to enable write combining on userspace mappings. Implement it on powerpc. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/pgtable.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h index 89f158731ce..88b0bd925a8 100644 --- a/arch/powerpc/include/asm/pgtable.h +++ b/arch/powerpc/include/asm/pgtable.h @@ -170,6 +170,7 @@ extern int ptep_set_access_flags(struct vm_area_struct *vma, unsigned long addre #define pgprot_cached_wthru(prot) (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \ _PAGE_COHERENT | _PAGE_WRITETHRU)) +#define pgprot_writecombine pgprot_noncached_wc struct file; extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, -- cgit v1.2.3-18-g5258 From 31116f0b7e8965ff3c2fd09ab240b7746d5556b3 Mon Sep 17 00:00:00 2001 From: Justin Mattock Date: Thu, 24 Feb 2011 20:10:18 +0000 Subject: powerpc/eeh: Remove one to many l's in the word. The patch below removes an extra "l" in the word. Signed-off-by: Justin P. Mattock Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/eeh.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 17a11c82e6f..3cc4d102b1f 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -876,7 +876,7 @@ void eeh_restore_bars(struct pci_dn *pdn) * * Save the values of the device bars. Unlike the restore * routine, this routine is *not* recursive. This is because - * PCI devices are added individuallly; but, for the restore, + * PCI devices are added individually; but, for the restore, * an entire slot is reset at a time. */ static void eeh_save_bars(struct pci_dn *pdn) -- cgit v1.2.3-18-g5258 From 9ff0c61d08ac4defa5ad6c65935a67643b8f4ce3 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Thu, 10 Feb 2011 11:57:27 +0000 Subject: powerpc: Mask smp_processor_id() false positive The rtas_event_scan() function uses smp_processor_id() to select a starting point in cpu_online_mask, and does so under the protection of get_online_cpus(). This might not select the current processor in any case, so switch to raw_smp_processor_id(). Signed-off-by: Paul E. McKenney Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/rtasd.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/rtasd.c b/arch/powerpc/kernel/rtasd.c index 049dbecb5db..7980ec0e1e1 100644 --- a/arch/powerpc/kernel/rtasd.c +++ b/arch/powerpc/kernel/rtasd.c @@ -412,7 +412,8 @@ static void rtas_event_scan(struct work_struct *w) get_online_cpus(); - cpu = cpumask_next(smp_processor_id(), cpu_online_mask); + /* raw_ OK because just using CPU as starting point. */ + cpu = cpumask_next(raw_smp_processor_id(), cpu_online_mask); if (cpu >= nr_cpu_ids) { cpu = cpumask_first(cpu_online_mask); -- cgit v1.2.3-18-g5258 From 6dd227002972be910c6191f38f8641e01796557f Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Thu, 27 Jan 2011 10:30:44 +0000 Subject: powerpc: Fix memory limits when starting at a non-zero address memblock_enforce_memory_limit() takes the desired maximum quantity of memory to end up with, not an address above which memory will not be used. Signed-off-by: Scott Wood Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/prom.c | 2 +- arch/powerpc/mm/init_32.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 7185f0da7dc..05b7139d6a2 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -97,7 +97,7 @@ static void __init move_device_tree(void) start = __pa(initial_boot_params); size = be32_to_cpu(initial_boot_params->totalsize); - if ((memory_limit && (start + size) > memory_limit) || + if ((memory_limit && (start + size) > PHYSICAL_START + memory_limit) || overlaps_crashkernel(start, size)) { p = __va(memblock_alloc(size, PAGE_SIZE)); memcpy(p, initial_boot_params, size); diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c index 742da43b4ab..d65b591e555 100644 --- a/arch/powerpc/mm/init_32.c +++ b/arch/powerpc/mm/init_32.c @@ -148,7 +148,7 @@ void __init MMU_init(void) lowmem_end_addr = memstart_addr + total_lowmem; #ifndef CONFIG_HIGHMEM total_memory = total_lowmem; - memblock_enforce_memory_limit(lowmem_end_addr); + memblock_enforce_memory_limit(total_lowmem); memblock_analyze(); #endif /* CONFIG_HIGHMEM */ } -- cgit v1.2.3-18-g5258 From e938c287ea8d977e079f07464ac69923412663ce Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Tue, 1 Mar 2011 14:28:02 +0000 Subject: x86: Fix a bogus unwind annotation in lib/semaphore_32.S 'simple' would have required specifying current frame address and return address location manually, but that's obviously not the case (and not necessary) here. Signed-off-by: Jan Beulich LKML-Reference: <4D6D1082020000780003454C@vpn.id2.novell.com> Signed-off-by: Ingo Molnar --- arch/x86/lib/semaphore_32.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/lib/semaphore_32.S b/arch/x86/lib/semaphore_32.S index 48e44f7ed76..06691daa410 100644 --- a/arch/x86/lib/semaphore_32.S +++ b/arch/x86/lib/semaphore_32.S @@ -36,7 +36,7 @@ */ #ifdef CONFIG_SMP ENTRY(__write_lock_failed) - CFI_STARTPROC simple + CFI_STARTPROC FRAME 2: LOCK_PREFIX addl $ RW_LOCK_BIAS,(%eax) -- cgit v1.2.3-18-g5258 From b06b3d49699a52e8f9ca056c4f96e81b1987d78e Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Wed, 2 Mar 2011 21:27:04 +0800 Subject: perf, x86: Add Intel SandyBridge CPU support This patch adds basic SandyBridge support, including hardware cache events and PEBS events support. It has been tested on SandyBridge CPUs with perf stat and also with PEBS based profiling - both work fine. The patch does not affect other models. v2 -> v3: - fix PEBS event 0xd0 with right umask combinations - move snb pebs constraint assignment to intel_pmu_init v1 -> v2: - add more raw and PEBS events constraints - use offcore events for LLC-* cache events - remove the call to Nehalem workaround enable_all function Signed-off-by: Lin Ming Acked-by: Peter Zijlstra Cc: Stephane Eranian Cc: Andi Kleen LKML-Reference: <1299072424.2175.24.camel@localhost> Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perf_event.c | 4 +- arch/x86/kernel/cpu/perf_event_intel.c | 124 ++++++++++++++++++++++++++++++ arch/x86/kernel/cpu/perf_event_intel_ds.c | 38 +++++++++ 3 files changed, 165 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index 9d977a2ea69..390fa6d8c14 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -166,8 +166,10 @@ struct cpu_hw_events { /* * Constraint on the Event code + UMask */ -#define PEBS_EVENT_CONSTRAINT(c, n) \ +#define INTEL_UEVENT_CONSTRAINT(c, n) \ EVENT_CONSTRAINT(c, n, INTEL_ARCH_EVENT_MASK) +#define PEBS_EVENT_CONSTRAINT(c, n) \ + INTEL_UEVENT_CONSTRAINT(c, n) #define EVENT_CONSTRAINT_END \ EVENT_CONSTRAINT(0, 0, 0) diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c index 008835c1d79..d00f386b0b3 100644 --- a/arch/x86/kernel/cpu/perf_event_intel.c +++ b/arch/x86/kernel/cpu/perf_event_intel.c @@ -76,6 +76,19 @@ static struct event_constraint intel_westmere_event_constraints[] = EVENT_CONSTRAINT_END }; +static struct event_constraint intel_snb_event_constraints[] = +{ + FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */ + FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */ + /* FIXED_EVENT_CONSTRAINT(0x013c, 2), CPU_CLK_UNHALTED.REF */ + INTEL_EVENT_CONSTRAINT(0x48, 0x4), /* L1D_PEND_MISS.PENDING */ + INTEL_EVENT_CONSTRAINT(0xb7, 0x1), /* OFF_CORE_RESPONSE_0 */ + INTEL_EVENT_CONSTRAINT(0xbb, 0x8), /* OFF_CORE_RESPONSE_1 */ + INTEL_UEVENT_CONSTRAINT(0x01c0, 0x2), /* INST_RETIRED.PREC_DIST */ + INTEL_EVENT_CONSTRAINT(0xcd, 0x8), /* MEM_TRANS_RETIRED.LOAD_LATENCY */ + EVENT_CONSTRAINT_END +}; + static struct event_constraint intel_gen_event_constraints[] = { FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */ @@ -89,6 +102,106 @@ static u64 intel_pmu_event_map(int hw_event) return intel_perfmon_event_map[hw_event]; } +static __initconst const u64 snb_hw_cache_event_ids + [PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX] = +{ + [ C(L1D) ] = { + [ C(OP_READ) ] = { + [ C(RESULT_ACCESS) ] = 0xf1d0, /* MEM_UOP_RETIRED.LOADS */ + [ C(RESULT_MISS) ] = 0x0151, /* L1D.REPLACEMENT */ + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = 0xf2d0, /* MEM_UOP_RETIRED.STORES */ + [ C(RESULT_MISS) ] = 0x0851, /* L1D.ALL_M_REPLACEMENT */ + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = 0x0, + [ C(RESULT_MISS) ] = 0x024e, /* HW_PRE_REQ.DL1_MISS */ + }, + }, + [ C(L1I ) ] = { + [ C(OP_READ) ] = { + [ C(RESULT_ACCESS) ] = 0x0, + [ C(RESULT_MISS) ] = 0x0280, /* ICACHE.MISSES */ + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = -1, + [ C(RESULT_MISS) ] = -1, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = 0x0, + [ C(RESULT_MISS) ] = 0x0, + }, + }, + [ C(LL ) ] = { + /* + * TBD: Need Off-core Response Performance Monitoring support + */ + [ C(OP_READ) ] = { + /* OFFCORE_RESPONSE_0.ANY_DATA.LOCAL_CACHE */ + [ C(RESULT_ACCESS) ] = 0x01b7, + /* OFFCORE_RESPONSE_1.ANY_DATA.ANY_LLC_MISS */ + [ C(RESULT_MISS) ] = 0x01bb, + }, + [ C(OP_WRITE) ] = { + /* OFFCORE_RESPONSE_0.ANY_RFO.LOCAL_CACHE */ + [ C(RESULT_ACCESS) ] = 0x01b7, + /* OFFCORE_RESPONSE_1.ANY_RFO.ANY_LLC_MISS */ + [ C(RESULT_MISS) ] = 0x01bb, + }, + [ C(OP_PREFETCH) ] = { + /* OFFCORE_RESPONSE_0.PREFETCH.LOCAL_CACHE */ + [ C(RESULT_ACCESS) ] = 0x01b7, + /* OFFCORE_RESPONSE_1.PREFETCH.ANY_LLC_MISS */ + [ C(RESULT_MISS) ] = 0x01bb, + }, + }, + [ C(DTLB) ] = { + [ C(OP_READ) ] = { + [ C(RESULT_ACCESS) ] = 0x81d0, /* MEM_UOP_RETIRED.ALL_LOADS */ + [ C(RESULT_MISS) ] = 0x0108, /* DTLB_LOAD_MISSES.CAUSES_A_WALK */ + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = 0x82d0, /* MEM_UOP_RETIRED.ALL_STORES */ + [ C(RESULT_MISS) ] = 0x0149, /* DTLB_STORE_MISSES.MISS_CAUSES_A_WALK */ + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = 0x0, + [ C(RESULT_MISS) ] = 0x0, + }, + }, + [ C(ITLB) ] = { + [ C(OP_READ) ] = { + [ C(RESULT_ACCESS) ] = 0x1085, /* ITLB_MISSES.STLB_HIT */ + [ C(RESULT_MISS) ] = 0x0185, /* ITLB_MISSES.CAUSES_A_WALK */ + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = -1, + [ C(RESULT_MISS) ] = -1, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = -1, + [ C(RESULT_MISS) ] = -1, + }, + }, + [ C(BPU ) ] = { + [ C(OP_READ) ] = { + [ C(RESULT_ACCESS) ] = 0x00c4, /* BR_INST_RETIRED.ALL_BRANCHES */ + [ C(RESULT_MISS) ] = 0x00c5, /* BR_MISP_RETIRED.ALL_BRANCHES */ + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = -1, + [ C(RESULT_MISS) ] = -1, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = -1, + [ C(RESULT_MISS) ] = -1, + }, + }, +}; + static __initconst const u64 westmere_hw_cache_event_ids [PERF_COUNT_HW_CACHE_MAX] [PERF_COUNT_HW_CACHE_OP_MAX] @@ -1062,6 +1175,17 @@ static __init int intel_pmu_init(void) pr_cont("Westmere events, "); break; + case 42: /* SandyBridge */ + memcpy(hw_cache_event_ids, snb_hw_cache_event_ids, + sizeof(hw_cache_event_ids)); + + intel_pmu_lbr_init_nhm(); + + x86_pmu.event_constraints = intel_snb_event_constraints; + x86_pmu.pebs_constraints = intel_snb_pebs_events; + pr_cont("SandyBridge events, "); + break; + default: /* * default constraints for v2 and up diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c index b7dcd9f2b8a..82519983488 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_ds.c +++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c @@ -388,6 +388,44 @@ static struct event_constraint intel_nehalem_pebs_events[] = { EVENT_CONSTRAINT_END }; +static struct event_constraint intel_snb_pebs_events[] = { + PEBS_EVENT_CONSTRAINT(0x01c0, 0x2), /* INST_RETIRED.PRECDIST */ + PEBS_EVENT_CONSTRAINT(0x01c2, 0xf), /* UOPS_RETIRED.ALL */ + PEBS_EVENT_CONSTRAINT(0x02c2, 0xf), /* UOPS_RETIRED.RETIRE_SLOTS */ + PEBS_EVENT_CONSTRAINT(0x01c4, 0xf), /* BR_INST_RETIRED.CONDITIONAL */ + PEBS_EVENT_CONSTRAINT(0x02c4, 0xf), /* BR_INST_RETIRED.NEAR_CALL */ + PEBS_EVENT_CONSTRAINT(0x04c4, 0xf), /* BR_INST_RETIRED.ALL_BRANCHES */ + PEBS_EVENT_CONSTRAINT(0x08c4, 0xf), /* BR_INST_RETIRED.NEAR_RETURN */ + PEBS_EVENT_CONSTRAINT(0x10c4, 0xf), /* BR_INST_RETIRED.NOT_TAKEN */ + PEBS_EVENT_CONSTRAINT(0x20c4, 0xf), /* BR_INST_RETIRED.NEAR_TAKEN */ + PEBS_EVENT_CONSTRAINT(0x40c4, 0xf), /* BR_INST_RETIRED.FAR_BRANCH */ + PEBS_EVENT_CONSTRAINT(0x01c5, 0xf), /* BR_MISP_RETIRED.CONDITIONAL */ + PEBS_EVENT_CONSTRAINT(0x02c5, 0xf), /* BR_MISP_RETIRED.NEAR_CALL */ + PEBS_EVENT_CONSTRAINT(0x04c5, 0xf), /* BR_MISP_RETIRED.ALL_BRANCHES */ + PEBS_EVENT_CONSTRAINT(0x10c5, 0xf), /* BR_MISP_RETIRED.NOT_TAKEN */ + PEBS_EVENT_CONSTRAINT(0x20c5, 0xf), /* BR_MISP_RETIRED.TAKEN */ + PEBS_EVENT_CONSTRAINT(0x01cd, 0x8), /* MEM_TRANS_RETIRED.LOAD_LATENCY */ + PEBS_EVENT_CONSTRAINT(0x02cd, 0x8), /* MEM_TRANS_RETIRED.PRECISE_STORE */ + PEBS_EVENT_CONSTRAINT(0x11d0, 0xf), /* MEM_UOP_RETIRED.STLB_MISS_LOADS */ + PEBS_EVENT_CONSTRAINT(0x12d0, 0xf), /* MEM_UOP_RETIRED.STLB_MISS_STORES */ + PEBS_EVENT_CONSTRAINT(0x21d0, 0xf), /* MEM_UOP_RETIRED.LOCK_LOADS */ + PEBS_EVENT_CONSTRAINT(0x22d0, 0xf), /* MEM_UOP_RETIRED.LOCK_STORES */ + PEBS_EVENT_CONSTRAINT(0x41d0, 0xf), /* MEM_UOP_RETIRED.SPLIT_LOADS */ + PEBS_EVENT_CONSTRAINT(0x42d0, 0xf), /* MEM_UOP_RETIRED.SPLIT_STORES */ + PEBS_EVENT_CONSTRAINT(0x81d0, 0xf), /* MEM_UOP_RETIRED.ANY_LOADS */ + PEBS_EVENT_CONSTRAINT(0x82d0, 0xf), /* MEM_UOP_RETIRED.ANY_STORES */ + PEBS_EVENT_CONSTRAINT(0x01d1, 0xf), /* MEM_LOAD_UOPS_RETIRED.L1_HIT */ + PEBS_EVENT_CONSTRAINT(0x02d1, 0xf), /* MEM_LOAD_UOPS_RETIRED.L2_HIT */ + PEBS_EVENT_CONSTRAINT(0x04d1, 0xf), /* MEM_LOAD_UOPS_RETIRED.LLC_HIT */ + PEBS_EVENT_CONSTRAINT(0x40d1, 0xf), /* MEM_LOAD_UOPS_RETIRED.HIT_LFB */ + PEBS_EVENT_CONSTRAINT(0x01d2, 0xf), /* MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_MISS */ + PEBS_EVENT_CONSTRAINT(0x02d2, 0xf), /* MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HIT */ + PEBS_EVENT_CONSTRAINT(0x04d2, 0xf), /* MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HITM */ + PEBS_EVENT_CONSTRAINT(0x08d2, 0xf), /* MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_NONE */ + PEBS_EVENT_CONSTRAINT(0x02d4, 0xf), /* MEM_LOAD_UOPS_MISC_RETIRED.LLC_MISS */ + EVENT_CONSTRAINT_END +}; + static struct event_constraint * intel_pebs_constraints(struct perf_event *event) { -- cgit v1.2.3-18-g5258 From ce0033307f1b45e23e0c149f56ea4855eb4687ce Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 2 Mar 2011 11:22:14 +0100 Subject: x86-64, NUMA: Fix distance table handling NUMA distance table handling has the following problems. * numa_reset_distance() uses numa_distance * sizeof(numa_distance[0]) as the table size when it should be using the square of numa_distance. * The same size miscalculation when allocation space for phys_dist in numa_emulation(). * In numa_emulation(), phys_dist must be reserved; otherwise, the new emulated distance table may overlap it. Fix them and, while at it, take numa_distance_cnt resetting in numa_reset_distance() out of the if block to simplify the code a bit. David Rientjes reported incorrect handling of distance table during emulation. -tj: Edited out numa_alloc_distance() related changes which weren't necessary and rewrote patch description. -v2: Ingo was unhappy with 80-column limit induced linebreaks. Let lines run over 80-column. Signed-off-by: Yinghai Lu Reported-by: David Rientjes Signed-off-by: Tejun Heo Cc: Ingo Molnar Acked-by: David Rientjes --- arch/x86/mm/numa_64.c | 8 +++----- arch/x86/mm/numa_emulation.c | 14 ++++++++------ 2 files changed, 11 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index 7757d2214fa..541746fdeb4 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -390,14 +390,12 @@ static void __init numa_nodemask_from_meminfo(nodemask_t *nodemask, */ void __init numa_reset_distance(void) { - size_t size; + size_t size = numa_distance_cnt * numa_distance_cnt * sizeof(numa_distance[0]); - if (numa_distance_cnt) { - size = numa_distance_cnt * sizeof(numa_distance[0]); + if (numa_distance_cnt) memblock_x86_free_range(__pa(numa_distance), __pa(numa_distance) + size); - numa_distance_cnt = 0; - } + numa_distance_cnt = 0; numa_distance = NULL; } diff --git a/arch/x86/mm/numa_emulation.c b/arch/x86/mm/numa_emulation.c index 607a2e8bc87..0afa25d967b 100644 --- a/arch/x86/mm/numa_emulation.c +++ b/arch/x86/mm/numa_emulation.c @@ -300,6 +300,7 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) static struct numa_meminfo pi __initdata; const u64 max_addr = max_pfn << PAGE_SHIFT; u8 *phys_dist = NULL; + size_t phys_size = numa_dist_cnt * numa_dist_cnt * sizeof(phys_dist[0]); int i, j, ret; if (!emu_cmdline) @@ -336,21 +337,18 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) goto no_emu; } - /* - * Copy the original distance table. It's temporary so no need to - * reserve it. - */ + /* copy the physical distance table */ if (numa_dist_cnt) { - size_t size = numa_dist_cnt * sizeof(phys_dist[0]); u64 phys; phys = memblock_find_in_range(0, (u64)max_pfn_mapped << PAGE_SHIFT, - size, PAGE_SIZE); + phys_size, PAGE_SIZE); if (phys == MEMBLOCK_ERROR) { pr_warning("NUMA: Warning: can't allocate copy of distance table, disabling emulation\n"); goto no_emu; } + memblock_x86_reserve_range(phys, phys + phys_size, "TMP NUMA DIST"); phys_dist = __va(phys); for (i = 0; i < numa_dist_cnt; i++) @@ -398,6 +396,10 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) numa_set_distance(i, j, dist); } } + + /* free the copied physical distance table */ + if (phys_dist) + memblock_x86_free_range(__pa(phys_dist), __pa(phys_dist) + phys_size); return; no_emu: -- cgit v1.2.3-18-g5258 From eb8c1e2c830fc25c93bc94e215ed387fe142a98d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 2 Mar 2011 11:32:47 +0100 Subject: x86-64, NUMA: Better explain numa_distance handling Handling of out-of-bounds distances and allocation failure can use better documentation. Add it. Signed-off-by: Tejun Heo Cc: Yinghai Lu Acked-by: David Rientjes --- arch/x86/mm/numa_64.c | 11 ++++++++++- arch/x86/mm/numa_emulation.c | 6 +++++- 2 files changed, 15 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index 541746fdeb4..74064e8ae79 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -392,11 +392,12 @@ void __init numa_reset_distance(void) { size_t size = numa_distance_cnt * numa_distance_cnt * sizeof(numa_distance[0]); + /* numa_distance could be 1LU marking allocation failure, test cnt */ if (numa_distance_cnt) memblock_x86_free_range(__pa(numa_distance), __pa(numa_distance) + size); numa_distance_cnt = 0; - numa_distance = NULL; + numa_distance = NULL; /* enable table creation */ } static int __init numa_alloc_distance(void) @@ -447,6 +448,14 @@ static int __init numa_alloc_distance(void) * Set the distance from node @from to @to to @distance. If distance table * doesn't exist, one which is large enough to accomodate all the currently * known nodes will be created. + * + * If such table cannot be allocated, a warning is printed and further + * calls are ignored until the distance table is reset with + * numa_reset_distance(). + * + * If @from or @to is higher than the highest known node at the time of + * table creation or @distance doesn't make sense, the call is ignored. + * This is to allow simplification of specific NUMA config implementations. */ void __init numa_set_distance(int from, int to, int distance) { diff --git a/arch/x86/mm/numa_emulation.c b/arch/x86/mm/numa_emulation.c index 0afa25d967b..aeecea93820 100644 --- a/arch/x86/mm/numa_emulation.c +++ b/arch/x86/mm/numa_emulation.c @@ -379,7 +379,11 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) if (emu_nid_to_phys[i] == NUMA_NO_NODE) emu_nid_to_phys[i] = 0; - /* transform distance table */ + /* + * Transform distance table. numa_set_distance() ignores all + * out-of-bound distances. Just call it for every possible node + * combination. + */ numa_reset_distance(); for (i = 0; i < MAX_NUMNODES; i++) { for (j = 0; j < MAX_NUMNODES; j++) { -- cgit v1.2.3-18-g5258 From 865212abb5268d56ab5e1035426bbeebba01138e Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Mon, 7 Feb 2011 16:08:04 +0200 Subject: arm: mach-omap2: smartreflex: fix another memory leak Temporary strings with volt_* file names should be released after the debugfs entries are created. While at it, also simplify the string allocation, and use just snprintf() to create the name. The patch eliminates kmemleak reports with the following stack trace (multiple objects depending on HW): unreferenced object 0xcedbc5a0 (size 64): comm "swapper", pid 1, jiffies 4294929375 (age 423.734s) hex dump (first 32 bytes): 76 6f 6c 74 5f 39 37 35 30 30 30 00 00 00 00 00 volt_975000..... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [] create_object+0x104/0x208 [] kmem_cache_alloc_trace+0xf0/0x17c [] omap_sr_probe+0x314/0x420 [] platform_drv_probe+0x18/0x1c [] driver_probe_device+0xc8/0x188 [] __driver_attach+0x68/0x8c [] bus_for_each_dev+0x44/0x74 [] bus_add_driver+0xa0/0x228 [] driver_register+0xa8/0x130 [] platform_driver_probe+0x18/0x8c [] sr_init+0x40/0x74 [] do_one_initcall+0xc8/0x1a0 [] kernel_init+0x150/0x218 [] kernel_thread_exit+0x0/0x8 [] 0xffffffff Signed-off-by: Aaro Koskinen Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/smartreflex.c | 15 +++------------ 1 file changed, 3 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 95ac336fe3f..5a849c98173 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -926,19 +926,10 @@ static int __init omap_sr_probe(struct platform_device *pdev) } for (i = 0; i < sr_info->nvalue_count; i++) { - char *name; - char volt_name[32]; - - name = kzalloc(NVALUE_NAME_LEN + 1, GFP_KERNEL); - if (!name) { - dev_err(&pdev->dev, "%s: Unable to allocate memory" - " for n-value directory name\n", __func__); - return -ENOMEM; - } + char name[NVALUE_NAME_LEN + 1]; - strcpy(name, "volt_"); - sprintf(volt_name, "%d", volt_data[i].volt_nominal); - strcat(name, volt_name); + snprintf(name, sizeof(name), "volt_%d", + volt_data[i].volt_nominal); (void) debugfs_create_x32(name, S_IRUGO | S_IWUSR, nvalue_dir, &(sr_info->nvalue_table[i].nvalue)); } -- cgit v1.2.3-18-g5258 From b3329a33b5a3902e65c5517f41c374f5adb060e1 Mon Sep 17 00:00:00 2001 From: Shweta Gulati Date: Tue, 15 Feb 2011 13:40:30 +0530 Subject: OMAP2+: PM: SmartReflex: fix memory leaks in Smartreflex driver This Patch frees all the dynamically allocated memory which couldn't have been released in some error hitting cases. Signed-off-by: Shweta Gulati Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/smartreflex.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 5a849c98173..1a777e34d0c 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -282,6 +282,7 @@ error: dev_err(&sr_info->pdev->dev, "%s: ERROR in registering" "interrupt handler. Smartreflex will" "not function as desired\n", __func__); + kfree(name); kfree(sr_info); return ret; } @@ -879,7 +880,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) ret = sr_late_init(sr_info); if (ret) { pr_warning("%s: Error in SR late init\n", __func__); - return ret; + goto err_release_region; } } @@ -890,14 +891,17 @@ static int __init omap_sr_probe(struct platform_device *pdev) * not try to create rest of the debugfs entries. */ vdd_dbg_dir = omap_voltage_get_dbgdir(sr_info->voltdm); - if (!vdd_dbg_dir) - return -EINVAL; + if (!vdd_dbg_dir) { + ret = -EINVAL; + goto err_release_region; + } dbg_dir = debugfs_create_dir("smartreflex", vdd_dbg_dir); if (IS_ERR(dbg_dir)) { dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n", __func__); - return PTR_ERR(dbg_dir); + ret = PTR_ERR(dbg_dir); + goto err_release_region; } (void) debugfs_create_file("autocomp", S_IRUGO | S_IWUSR, dbg_dir, @@ -913,7 +917,8 @@ static int __init omap_sr_probe(struct platform_device *pdev) if (IS_ERR(nvalue_dir)) { dev_err(&pdev->dev, "%s: Unable to create debugfs directory" "for n-values\n", __func__); - return PTR_ERR(nvalue_dir); + ret = PTR_ERR(nvalue_dir); + goto err_release_region; } omap_voltage_get_volttable(sr_info->voltdm, &volt_data); @@ -922,7 +927,8 @@ static int __init omap_sr_probe(struct platform_device *pdev) " corresponding vdd vdd_%s. Cannot create debugfs" "entries for n-values\n", __func__, sr_info->voltdm->name); - return -ENODATA; + ret = -ENODATA; + goto err_release_region; } for (i = 0; i < sr_info->nvalue_count; i++) { -- cgit v1.2.3-18-g5258 From 0c7a720bd1c9059fe7b869bc5feeba738d6ce799 Mon Sep 17 00:00:00 2001 From: Morten Holst Larsen Date: Sun, 23 Jan 2011 13:40:47 +0100 Subject: Fix typo in call to irq_to_desc() Fix typo in call to irq_to_desc() Signed-off-by: Morten H. Larsen Signed-off-by: Matt Turner --- arch/alpha/kernel/irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/alpha/kernel/irq.c b/arch/alpha/kernel/irq.c index 9ab234f48dd..d3e20c7bbac 100644 --- a/arch/alpha/kernel/irq.c +++ b/arch/alpha/kernel/irq.c @@ -44,7 +44,7 @@ static char irq_user_affinity[NR_IRQS]; int irq_select_affinity(unsigned int irq) { - struct irq_desc *desc = irq_to_desc[irq]; + struct irq_desc *desc = irq_to_desc(irq); static int last_cpu; int cpu = last_cpu + 1; -- cgit v1.2.3-18-g5258 From 592924c7741377790866ee4bd7e6f214b1aeaade Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 6 Feb 2011 14:32:23 +0000 Subject: alpha: Pyxis convert irq_chip functions Signed-off-by: Thomas Gleixner Signed-off-by: Matt Turner --- arch/alpha/kernel/irq_pyxis.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/alpha/kernel/irq_pyxis.c b/arch/alpha/kernel/irq_pyxis.c index 2863458c853..b30227fa7f5 100644 --- a/arch/alpha/kernel/irq_pyxis.c +++ b/arch/alpha/kernel/irq_pyxis.c @@ -29,21 +29,21 @@ pyxis_update_irq_hw(unsigned long mask) } static inline void -pyxis_enable_irq(unsigned int irq) +pyxis_enable_irq(struct irq_data *d) { - pyxis_update_irq_hw(cached_irq_mask |= 1UL << (irq - 16)); + pyxis_update_irq_hw(cached_irq_mask |= 1UL << (d->irq - 16)); } static void -pyxis_disable_irq(unsigned int irq) +pyxis_disable_irq(struct irq_data *d) { - pyxis_update_irq_hw(cached_irq_mask &= ~(1UL << (irq - 16))); + pyxis_update_irq_hw(cached_irq_mask &= ~(1UL << (d->irq - 16))); } static void -pyxis_mask_and_ack_irq(unsigned int irq) +pyxis_mask_and_ack_irq(struct irq_data *d) { - unsigned long bit = 1UL << (irq - 16); + unsigned long bit = 1UL << (d->irq - 16); unsigned long mask = cached_irq_mask &= ~bit; /* Disable the interrupt. */ @@ -58,9 +58,9 @@ pyxis_mask_and_ack_irq(unsigned int irq) static struct irq_chip pyxis_irq_type = { .name = "PYXIS", - .mask_ack = pyxis_mask_and_ack_irq, - .mask = pyxis_disable_irq, - .unmask = pyxis_enable_irq, + .irq_mask_ack = pyxis_mask_and_ack_irq, + .irq_mask = pyxis_disable_irq, + .irq_unmask = pyxis_enable_irq, }; void @@ -103,7 +103,7 @@ init_pyxis_irqs(unsigned long ignore_mask) if ((ignore_mask >> i) & 1) continue; set_irq_chip_and_handler(i, &pyxis_irq_type, handle_level_irq); - irq_to_desc(i)->status |= IRQ_LEVEL; + irq_set_status_flags(i, IRQ_LEVEL); } setup_irq(16+7, &isa_cascade_irqaction); -- cgit v1.2.3-18-g5258 From 35252254cbd89191f381bb5454b3bdfb939e9d31 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 6 Feb 2011 14:32:26 +0000 Subject: alpha: srm: Convert irq_chip functions Signed-off-by: Thomas Gleixner Signed-off-by: Matt Turner --- arch/alpha/kernel/irq_srm.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/alpha/kernel/irq_srm.c b/arch/alpha/kernel/irq_srm.c index 0e57e828b41..82a47bba41c 100644 --- a/arch/alpha/kernel/irq_srm.c +++ b/arch/alpha/kernel/irq_srm.c @@ -18,27 +18,27 @@ DEFINE_SPINLOCK(srm_irq_lock); static inline void -srm_enable_irq(unsigned int irq) +srm_enable_irq(struct irq_data *d) { spin_lock(&srm_irq_lock); - cserve_ena(irq - 16); + cserve_ena(d->irq - 16); spin_unlock(&srm_irq_lock); } static void -srm_disable_irq(unsigned int irq) +srm_disable_irq(struct irq_data *d) { spin_lock(&srm_irq_lock); - cserve_dis(irq - 16); + cserve_dis(d->irq - 16); spin_unlock(&srm_irq_lock); } /* Handle interrupts from the SRM, assuming no additional weirdness. */ static struct irq_chip srm_irq_type = { .name = "SRM", - .unmask = srm_enable_irq, - .mask = srm_disable_irq, - .mask_ack = srm_disable_irq, + .irq_unmask = srm_enable_irq, + .irq_mask = srm_disable_irq, + .irq_mask_ack = srm_disable_irq, }; void __init @@ -52,7 +52,7 @@ init_srm_irqs(long max, unsigned long ignore_mask) if (i < 64 && ((ignore_mask >> i) & 1)) continue; set_irq_chip_and_handler(i, &srm_irq_type, handle_level_irq); - irq_to_desc(i)->status |= IRQ_LEVEL; + irq_set_status_flags(i, IRQ_LEVEL); } } -- cgit v1.2.3-18-g5258 From ff53afe66a3ab5614309a4193df72c82ec3bb984 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 6 Feb 2011 14:32:28 +0000 Subject: alpha: i8259, alcor, jensen wildfire: Convert irq_chip Signed-off-by: Thomas Gleixner Signed-off-by: Matt Turner --- arch/alpha/kernel/irq_i8259.c | 18 ++++++++++-------- arch/alpha/kernel/irq_impl.h | 8 +++----- arch/alpha/kernel/sys_alcor.c | 28 ++++++++++++++-------------- arch/alpha/kernel/sys_jensen.c | 24 ++++++++++++------------ arch/alpha/kernel/sys_wildfire.c | 32 +++++++++++++++++++------------- 5 files changed, 58 insertions(+), 52 deletions(-) (limited to 'arch') diff --git a/arch/alpha/kernel/irq_i8259.c b/arch/alpha/kernel/irq_i8259.c index 956ea0ed169..c7cc9813e45 100644 --- a/arch/alpha/kernel/irq_i8259.c +++ b/arch/alpha/kernel/irq_i8259.c @@ -33,10 +33,10 @@ i8259_update_irq_hw(unsigned int irq, unsigned long mask) } inline void -i8259a_enable_irq(unsigned int irq) +i8259a_enable_irq(struct irq_data *d) { spin_lock(&i8259_irq_lock); - i8259_update_irq_hw(irq, cached_irq_mask &= ~(1 << irq)); + i8259_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << d->irq)); spin_unlock(&i8259_irq_lock); } @@ -47,16 +47,18 @@ __i8259a_disable_irq(unsigned int irq) } void -i8259a_disable_irq(unsigned int irq) +i8259a_disable_irq(struct irq_data *d) { spin_lock(&i8259_irq_lock); - __i8259a_disable_irq(irq); + __i8259a_disable_irq(d->irq); spin_unlock(&i8259_irq_lock); } void -i8259a_mask_and_ack_irq(unsigned int irq) +i8259a_mask_and_ack_irq(struct irq_data *d) { + unsigned int irq = d->irq; + spin_lock(&i8259_irq_lock); __i8259a_disable_irq(irq); @@ -71,9 +73,9 @@ i8259a_mask_and_ack_irq(unsigned int irq) struct irq_chip i8259a_irq_type = { .name = "XT-PIC", - .unmask = i8259a_enable_irq, - .mask = i8259a_disable_irq, - .mask_ack = i8259a_mask_and_ack_irq, + .irq_unmask = i8259a_enable_irq, + .irq_mask = i8259a_disable_irq, + .irq_mask_ack = i8259a_mask_and_ack_irq, }; void __init diff --git a/arch/alpha/kernel/irq_impl.h b/arch/alpha/kernel/irq_impl.h index b63ccd7386f..d507a234b05 100644 --- a/arch/alpha/kernel/irq_impl.h +++ b/arch/alpha/kernel/irq_impl.h @@ -31,11 +31,9 @@ extern void init_rtc_irq(void); extern void common_init_isa_dma(void); -extern void i8259a_enable_irq(unsigned int); -extern void i8259a_disable_irq(unsigned int); -extern void i8259a_mask_and_ack_irq(unsigned int); -extern unsigned int i8259a_startup_irq(unsigned int); -extern void i8259a_end_irq(unsigned int); +extern void i8259a_enable_irq(struct irq_data *d); +extern void i8259a_disable_irq(struct irq_data *d); +extern void i8259a_mask_and_ack_irq(struct irq_data *d); extern struct irq_chip i8259a_irq_type; extern void init_i8259a_irqs(void); diff --git a/arch/alpha/kernel/sys_alcor.c b/arch/alpha/kernel/sys_alcor.c index 7bef6176823..88d95e872f5 100644 --- a/arch/alpha/kernel/sys_alcor.c +++ b/arch/alpha/kernel/sys_alcor.c @@ -44,31 +44,31 @@ alcor_update_irq_hw(unsigned long mask) } static inline void -alcor_enable_irq(unsigned int irq) +alcor_enable_irq(struct irq_data *d) { - alcor_update_irq_hw(cached_irq_mask |= 1UL << (irq - 16)); + alcor_update_irq_hw(cached_irq_mask |= 1UL << (d->irq - 16)); } static void -alcor_disable_irq(unsigned int irq) +alcor_disable_irq(struct irq_data *d) { - alcor_update_irq_hw(cached_irq_mask &= ~(1UL << (irq - 16))); + alcor_update_irq_hw(cached_irq_mask &= ~(1UL << (d->irq - 16))); } static void -alcor_mask_and_ack_irq(unsigned int irq) +alcor_mask_and_ack_irq(struct irq_data *d) { - alcor_disable_irq(irq); + alcor_disable_irq(d); /* On ALCOR/XLT, need to dismiss interrupt via GRU. */ - *(vuip)GRU_INT_CLEAR = 1 << (irq - 16); mb(); + *(vuip)GRU_INT_CLEAR = 1 << (d->irq - 16); mb(); *(vuip)GRU_INT_CLEAR = 0; mb(); } static void -alcor_isa_mask_and_ack_irq(unsigned int irq) +alcor_isa_mask_and_ack_irq(struct irq_data *d) { - i8259a_mask_and_ack_irq(irq); + i8259a_mask_and_ack_irq(d); /* On ALCOR/XLT, need to dismiss interrupt via GRU. */ *(vuip)GRU_INT_CLEAR = 0x80000000; mb(); @@ -77,9 +77,9 @@ alcor_isa_mask_and_ack_irq(unsigned int irq) static struct irq_chip alcor_irq_type = { .name = "ALCOR", - .unmask = alcor_enable_irq, - .mask = alcor_disable_irq, - .mask_ack = alcor_mask_and_ack_irq, + .irq_unmask = alcor_enable_irq, + .irq_mask = alcor_disable_irq, + .irq_mask_ack = alcor_mask_and_ack_irq, }; static void @@ -126,9 +126,9 @@ alcor_init_irq(void) if (i >= 16+20 && i <= 16+30) continue; set_irq_chip_and_handler(i, &alcor_irq_type, handle_level_irq); - irq_to_desc(i)->status |= IRQ_LEVEL; + irq_set_status_flags(i, IRQ_LEVEL); } - i8259a_irq_type.ack = alcor_isa_mask_and_ack_irq; + i8259a_irq_type.irq_ack = alcor_isa_mask_and_ack_irq; init_i8259a_irqs(); common_init_isa_dma(); diff --git a/arch/alpha/kernel/sys_jensen.c b/arch/alpha/kernel/sys_jensen.c index 34f55e03d33..00341b75c8b 100644 --- a/arch/alpha/kernel/sys_jensen.c +++ b/arch/alpha/kernel/sys_jensen.c @@ -63,34 +63,34 @@ */ static void -jensen_local_enable(unsigned int irq) +jensen_local_enable(struct irq_data *d) { /* the parport is really hw IRQ 1, silly Jensen. */ - if (irq == 7) - i8259a_enable_irq(1); + if (d->irq == 7) + i8259a_enable_irq(d); } static void -jensen_local_disable(unsigned int irq) +jensen_local_disable(struct irq_data *d) { /* the parport is really hw IRQ 1, silly Jensen. */ - if (irq == 7) - i8259a_disable_irq(1); + if (d->irq == 7) + i8259a_disable_irq(d); } static void -jensen_local_mask_ack(unsigned int irq) +jensen_local_mask_ack(struct irq_data *d) { /* the parport is really hw IRQ 1, silly Jensen. */ - if (irq == 7) - i8259a_mask_and_ack_irq(1); + if (d->irq == 7) + i8259a_mask_and_ack_irq(d); } static struct irq_chip jensen_local_irq_type = { .name = "LOCAL", - .unmask = jensen_local_enable, - .mask = jensen_local_disable, - .mask_ack = jensen_local_mask_ack, + .irq_unmask = jensen_local_enable, + .irq_mask = jensen_local_disable, + .irq_mask_ack = jensen_local_mask_ack, }; static void diff --git a/arch/alpha/kernel/sys_wildfire.c b/arch/alpha/kernel/sys_wildfire.c index eec52594d41..ca60a387ef0 100644 --- a/arch/alpha/kernel/sys_wildfire.c +++ b/arch/alpha/kernel/sys_wildfire.c @@ -104,10 +104,12 @@ wildfire_init_irq_hw(void) } static void -wildfire_enable_irq(unsigned int irq) +wildfire_enable_irq(struct irq_data *d) { + unsigned int irq = d->irq; + if (irq < 16) - i8259a_enable_irq(irq); + i8259a_enable_irq(d); spin_lock(&wildfire_irq_lock); set_bit(irq, &cached_irq_mask); @@ -116,10 +118,12 @@ wildfire_enable_irq(unsigned int irq) } static void -wildfire_disable_irq(unsigned int irq) +wildfire_disable_irq(struct irq_data *d) { + unsigned int irq = d->irq; + if (irq < 16) - i8259a_disable_irq(irq); + i8259a_disable_irq(d); spin_lock(&wildfire_irq_lock); clear_bit(irq, &cached_irq_mask); @@ -128,10 +132,12 @@ wildfire_disable_irq(unsigned int irq) } static void -wildfire_mask_and_ack_irq(unsigned int irq) +wildfire_mask_and_ack_irq(struct irq_data *d) { + unsigned int irq = d->irq; + if (irq < 16) - i8259a_mask_and_ack_irq(irq); + i8259a_mask_and_ack_irq(d); spin_lock(&wildfire_irq_lock); clear_bit(irq, &cached_irq_mask); @@ -141,9 +147,9 @@ wildfire_mask_and_ack_irq(unsigned int irq) static struct irq_chip wildfire_irq_type = { .name = "WILDFIRE", - .unmask = wildfire_enable_irq, - .mask = wildfire_disable_irq, - .mask_ack = wildfire_mask_and_ack_irq, + .irq_unmask = wildfire_enable_irq, + .irq_mask = wildfire_disable_irq, + .irq_mask_ack = wildfire_mask_and_ack_irq, }; static void __init @@ -177,21 +183,21 @@ wildfire_init_irq_per_pca(int qbbno, int pcano) for (i = 0; i < 16; ++i) { if (i == 2) continue; - irq_to_desc(i+irq_bias)->status |= IRQ_LEVEL; set_irq_chip_and_handler(i+irq_bias, &wildfire_irq_type, handle_level_irq); + irq_set_status_flags(i + irq_bias, IRQ_LEVEL); } - irq_to_desc(36+irq_bias)->status |= IRQ_LEVEL; set_irq_chip_and_handler(36+irq_bias, &wildfire_irq_type, handle_level_irq); + irq_set_status_flags(36 + irq_bias, IRQ_LEVEL); for (i = 40; i < 64; ++i) { - irq_to_desc(i+irq_bias)->status |= IRQ_LEVEL; set_irq_chip_and_handler(i+irq_bias, &wildfire_irq_type, handle_level_irq); + irq_set_status_flags(i + irq_bias, IRQ_LEVEL); } - setup_irq(32+irq_bias, &isa_enable); + setup_irq(32+irq_bias, &isa_enable); } static void __init -- cgit v1.2.3-18-g5258 From 118b4691da32be471d91edfad0edd555933be769 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 6 Feb 2011 14:32:30 +0000 Subject: alpha: cabriolet: Convert irq_chip functions Signed-off-by: Thomas Gleixner Signed-off-by: Matt Turner --- arch/alpha/kernel/sys_cabriolet.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/alpha/kernel/sys_cabriolet.c b/arch/alpha/kernel/sys_cabriolet.c index b0c916493ae..57eb6307bc2 100644 --- a/arch/alpha/kernel/sys_cabriolet.c +++ b/arch/alpha/kernel/sys_cabriolet.c @@ -46,22 +46,22 @@ cabriolet_update_irq_hw(unsigned int irq, unsigned long mask) } static inline void -cabriolet_enable_irq(unsigned int irq) +cabriolet_enable_irq(struct irq_data *d) { - cabriolet_update_irq_hw(irq, cached_irq_mask &= ~(1UL << irq)); + cabriolet_update_irq_hw(d->irq, cached_irq_mask &= ~(1UL << d->irq)); } static void -cabriolet_disable_irq(unsigned int irq) +cabriolet_disable_irq(struct irq_data *d) { - cabriolet_update_irq_hw(irq, cached_irq_mask |= 1UL << irq); + cabriolet_update_irq_hw(d->irq, cached_irq_mask |= 1UL << d->irq); } static struct irq_chip cabriolet_irq_type = { .name = "CABRIOLET", - .unmask = cabriolet_enable_irq, - .mask = cabriolet_disable_irq, - .mask_ack = cabriolet_disable_irq, + .irq_unmask = cabriolet_enable_irq, + .irq_mask = cabriolet_disable_irq, + .irq_mask_ack = cabriolet_disable_irq, }; static void @@ -107,7 +107,7 @@ common_init_irq(void (*srm_dev_int)(unsigned long v)) for (i = 16; i < 35; ++i) { set_irq_chip_and_handler(i, &cabriolet_irq_type, handle_level_irq); - irq_to_desc(i)->status |= IRQ_LEVEL; + irq_set_status_flags(i, IRQ_LEVEL); } } -- cgit v1.2.3-18-g5258 From d677f4508accb92126e7b2827de525e48ea73cdf Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 6 Feb 2011 14:32:33 +0000 Subject: alpha: dp264: Convert irq_chip functions Signed-off-by: Thomas Gleixner Signed-off-by: Matt Turner --- arch/alpha/kernel/sys_dp264.c | 52 ++++++++++++++++++++++--------------------- 1 file changed, 27 insertions(+), 25 deletions(-) (limited to 'arch') diff --git a/arch/alpha/kernel/sys_dp264.c b/arch/alpha/kernel/sys_dp264.c index edad5f759cc..481df4ecb65 100644 --- a/arch/alpha/kernel/sys_dp264.c +++ b/arch/alpha/kernel/sys_dp264.c @@ -98,37 +98,37 @@ tsunami_update_irq_hw(unsigned long mask) } static void -dp264_enable_irq(unsigned int irq) +dp264_enable_irq(struct irq_data *d) { spin_lock(&dp264_irq_lock); - cached_irq_mask |= 1UL << irq; + cached_irq_mask |= 1UL << d->irq; tsunami_update_irq_hw(cached_irq_mask); spin_unlock(&dp264_irq_lock); } static void -dp264_disable_irq(unsigned int irq) +dp264_disable_irq(struct irq_data *d) { spin_lock(&dp264_irq_lock); - cached_irq_mask &= ~(1UL << irq); + cached_irq_mask &= ~(1UL << d->irq); tsunami_update_irq_hw(cached_irq_mask); spin_unlock(&dp264_irq_lock); } static void -clipper_enable_irq(unsigned int irq) +clipper_enable_irq(struct irq_data *d) { spin_lock(&dp264_irq_lock); - cached_irq_mask |= 1UL << (irq - 16); + cached_irq_mask |= 1UL << (d->irq - 16); tsunami_update_irq_hw(cached_irq_mask); spin_unlock(&dp264_irq_lock); } static void -clipper_disable_irq(unsigned int irq) +clipper_disable_irq(struct irq_data *d) { spin_lock(&dp264_irq_lock); - cached_irq_mask &= ~(1UL << (irq - 16)); + cached_irq_mask &= ~(1UL << (d->irq - 16)); tsunami_update_irq_hw(cached_irq_mask); spin_unlock(&dp264_irq_lock); } @@ -149,10 +149,11 @@ cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity) } static int -dp264_set_affinity(unsigned int irq, const struct cpumask *affinity) -{ +dp264_set_affinity(struct irq_data *d, const struct cpumask *affinity, + bool force) +{ spin_lock(&dp264_irq_lock); - cpu_set_irq_affinity(irq, *affinity); + cpu_set_irq_affinity(d->irq, *affinity); tsunami_update_irq_hw(cached_irq_mask); spin_unlock(&dp264_irq_lock); @@ -160,10 +161,11 @@ dp264_set_affinity(unsigned int irq, const struct cpumask *affinity) } static int -clipper_set_affinity(unsigned int irq, const struct cpumask *affinity) -{ +clipper_set_affinity(struct irq_data *d, const struct cpumask *affinity, + bool force) +{ spin_lock(&dp264_irq_lock); - cpu_set_irq_affinity(irq - 16, *affinity); + cpu_set_irq_affinity(d->irq - 16, *affinity); tsunami_update_irq_hw(cached_irq_mask); spin_unlock(&dp264_irq_lock); @@ -171,19 +173,19 @@ clipper_set_affinity(unsigned int irq, const struct cpumask *affinity) } static struct irq_chip dp264_irq_type = { - .name = "DP264", - .unmask = dp264_enable_irq, - .mask = dp264_disable_irq, - .mask_ack = dp264_disable_irq, - .set_affinity = dp264_set_affinity, + .name = "DP264", + .irq_unmask = dp264_enable_irq, + .irq_mask = dp264_disable_irq, + .irq_mask_ack = dp264_disable_irq, + .irq_set_affinity = dp264_set_affinity, }; static struct irq_chip clipper_irq_type = { - .name = "CLIPPER", - .unmask = clipper_enable_irq, - .mask = clipper_disable_irq, - .mask_ack = clipper_disable_irq, - .set_affinity = clipper_set_affinity, + .name = "CLIPPER", + .irq_unmask = clipper_enable_irq, + .irq_mask = clipper_disable_irq, + .irq_mask_ack = clipper_disable_irq, + .irq_set_affinity = clipper_set_affinity, }; static void @@ -268,8 +270,8 @@ init_tsunami_irqs(struct irq_chip * ops, int imin, int imax) { long i; for (i = imin; i <= imax; ++i) { - irq_to_desc(i)->status |= IRQ_LEVEL; set_irq_chip_and_handler(i, ops, handle_level_irq); + irq_set_status_flags(i, IRQ_LEVEL); } } -- cgit v1.2.3-18-g5258 From 02e5d87be229763e0f07a196c08dad35bf870329 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 6 Feb 2011 14:32:35 +0000 Subject: alpha: eb64p: Convert irq_chip functions Signed-off-by: Thomas Gleixner Signed-off-by: Matt Turner --- arch/alpha/kernel/sys_eb64p.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/alpha/kernel/sys_eb64p.c b/arch/alpha/kernel/sys_eb64p.c index ae5f29d127b..402e908ffb3 100644 --- a/arch/alpha/kernel/sys_eb64p.c +++ b/arch/alpha/kernel/sys_eb64p.c @@ -44,22 +44,22 @@ eb64p_update_irq_hw(unsigned int irq, unsigned long mask) } static inline void -eb64p_enable_irq(unsigned int irq) +eb64p_enable_irq(struct irq_data *d) { - eb64p_update_irq_hw(irq, cached_irq_mask &= ~(1 << irq)); + eb64p_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << d->irq)); } static void -eb64p_disable_irq(unsigned int irq) +eb64p_disable_irq(struct irq_data *d) { - eb64p_update_irq_hw(irq, cached_irq_mask |= 1 << irq); + eb64p_update_irq_hw(d->irq, cached_irq_mask |= 1 << d->irq); } static struct irq_chip eb64p_irq_type = { .name = "EB64P", - .unmask = eb64p_enable_irq, - .mask = eb64p_disable_irq, - .mask_ack = eb64p_disable_irq, + .irq_unmask = eb64p_enable_irq, + .irq_mask = eb64p_disable_irq, + .irq_mask_ack = eb64p_disable_irq, }; static void @@ -118,9 +118,9 @@ eb64p_init_irq(void) init_i8259a_irqs(); for (i = 16; i < 32; ++i) { - irq_to_desc(i)->status |= IRQ_LEVEL; set_irq_chip_and_handler(i, &eb64p_irq_type, handle_level_irq); - } + irq_set_status_flags(i, IRQ_LEVEL); + } common_init_isa_dma(); setup_irq(16+5, &isa_cascade_irqaction); -- cgit v1.2.3-18-g5258 From c049766445b8791ab683c765674de86588d9ae14 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 6 Feb 2011 14:32:37 +0000 Subject: alpha: eiger: Convert irq_chip functions Signed-off-by: Thomas Gleixner Signed-off-by: Matt Turner --- arch/alpha/kernel/sys_eiger.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/alpha/kernel/sys_eiger.c b/arch/alpha/kernel/sys_eiger.c index 1121bc5c6c6..0b44a54c152 100644 --- a/arch/alpha/kernel/sys_eiger.c +++ b/arch/alpha/kernel/sys_eiger.c @@ -51,16 +51,18 @@ eiger_update_irq_hw(unsigned long irq, unsigned long mask) } static inline void -eiger_enable_irq(unsigned int irq) +eiger_enable_irq(struct irq_data *d) { + unsigned int irq = d->irq; unsigned long mask; mask = (cached_irq_mask[irq >= 64] &= ~(1UL << (irq & 63))); eiger_update_irq_hw(irq, mask); } static void -eiger_disable_irq(unsigned int irq) +eiger_disable_irq(struct irq_data *d) { + unsigned int irq = d->irq; unsigned long mask; mask = (cached_irq_mask[irq >= 64] |= 1UL << (irq & 63)); eiger_update_irq_hw(irq, mask); @@ -68,9 +70,9 @@ eiger_disable_irq(unsigned int irq) static struct irq_chip eiger_irq_type = { .name = "EIGER", - .unmask = eiger_enable_irq, - .mask = eiger_disable_irq, - .mask_ack = eiger_disable_irq, + .irq_unmask = eiger_enable_irq, + .irq_mask = eiger_disable_irq, + .irq_mask_ack = eiger_disable_irq, }; static void @@ -136,8 +138,8 @@ eiger_init_irq(void) init_i8259a_irqs(); for (i = 16; i < 128; ++i) { - irq_to_desc(i)->status |= IRQ_LEVEL; set_irq_chip_and_handler(i, &eiger_irq_type, handle_level_irq); + irq_set_status_flags(i, IRQ_LEVEL); } } -- cgit v1.2.3-18-g5258 From 08876fe8519c4f7625efba8aa3d51b1d24cd8a13 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 6 Feb 2011 14:32:39 +0000 Subject: alpha: marvel: Convert irq_chip functions Signed-off-by: Thomas Gleixner Signed-off-by: Matt Turner --- arch/alpha/kernel/sys_marvel.c | 42 +++++++++++++++++++----------------------- 1 file changed, 19 insertions(+), 23 deletions(-) (limited to 'arch') diff --git a/arch/alpha/kernel/sys_marvel.c b/arch/alpha/kernel/sys_marvel.c index 2bfc9f1b1dd..e61910734e4 100644 --- a/arch/alpha/kernel/sys_marvel.c +++ b/arch/alpha/kernel/sys_marvel.c @@ -104,9 +104,10 @@ io7_get_irq_ctl(unsigned int irq, struct io7 **pio7) } static void -io7_enable_irq(unsigned int irq) +io7_enable_irq(struct irq_data *d) { volatile unsigned long *ctl; + unsigned int irq = d->irq; struct io7 *io7; ctl = io7_get_irq_ctl(irq, &io7); @@ -115,7 +116,7 @@ io7_enable_irq(unsigned int irq) __func__, irq); return; } - + spin_lock(&io7->irq_lock); *ctl |= 1UL << 24; mb(); @@ -124,9 +125,10 @@ io7_enable_irq(unsigned int irq) } static void -io7_disable_irq(unsigned int irq) +io7_disable_irq(struct irq_data *d) { volatile unsigned long *ctl; + unsigned int irq = d->irq; struct io7 *io7; ctl = io7_get_irq_ctl(irq, &io7); @@ -135,7 +137,7 @@ io7_disable_irq(unsigned int irq) __func__, irq); return; } - + spin_lock(&io7->irq_lock); *ctl &= ~(1UL << 24); mb(); @@ -144,35 +146,29 @@ io7_disable_irq(unsigned int irq) } static void -marvel_irq_noop(unsigned int irq) -{ - return; -} - -static unsigned int -marvel_irq_noop_return(unsigned int irq) -{ - return 0; +marvel_irq_noop(struct irq_data *d) +{ + return; } static struct irq_chip marvel_legacy_irq_type = { .name = "LEGACY", - .mask = marvel_irq_noop, - .unmask = marvel_irq_noop, + .irq_mask = marvel_irq_noop, + .irq_unmask = marvel_irq_noop, }; static struct irq_chip io7_lsi_irq_type = { .name = "LSI", - .unmask = io7_enable_irq, - .mask = io7_disable_irq, - .mask_ack = io7_disable_irq, + .irq_unmask = io7_enable_irq, + .irq_mask = io7_disable_irq, + .irq_mask_ack = io7_disable_irq, }; static struct irq_chip io7_msi_irq_type = { .name = "MSI", - .unmask = io7_enable_irq, - .mask = io7_disable_irq, - .ack = marvel_irq_noop, + .irq_unmask = io7_enable_irq, + .irq_mask = io7_disable_irq, + .irq_ack = marvel_irq_noop, }; static void @@ -280,8 +276,8 @@ init_io7_irqs(struct io7 *io7, /* Set up the lsi irqs. */ for (i = 0; i < 128; ++i) { - irq_to_desc(base + i)->status |= IRQ_LEVEL; set_irq_chip_and_handler(base + i, lsi_ops, handle_level_irq); + irq_set_status_flags(i, IRQ_LEVEL); } /* Disable the implemented irqs in hardware. */ @@ -294,8 +290,8 @@ init_io7_irqs(struct io7 *io7, /* Set up the msi irqs. */ for (i = 128; i < (128 + 512); ++i) { - irq_to_desc(base + i)->status |= IRQ_LEVEL; set_irq_chip_and_handler(base + i, msi_ops, handle_level_irq); + irq_set_status_flags(i, IRQ_LEVEL); } for (i = 0; i < 16; ++i) -- cgit v1.2.3-18-g5258 From a326526360622825fd98c05a0eae3087efb0df81 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 6 Feb 2011 14:32:42 +0000 Subject: alpha: mikasa: Convert irq_chip functions Signed-off-by: Thomas Gleixner Signed-off-by: Matt Turner --- arch/alpha/kernel/sys_mikasa.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/alpha/kernel/sys_mikasa.c b/arch/alpha/kernel/sys_mikasa.c index bcc1639e8ef..cf7f43dd314 100644 --- a/arch/alpha/kernel/sys_mikasa.c +++ b/arch/alpha/kernel/sys_mikasa.c @@ -43,22 +43,22 @@ mikasa_update_irq_hw(int mask) } static inline void -mikasa_enable_irq(unsigned int irq) +mikasa_enable_irq(struct irq_data *d) { - mikasa_update_irq_hw(cached_irq_mask |= 1 << (irq - 16)); + mikasa_update_irq_hw(cached_irq_mask |= 1 << (d->irq - 16)); } static void -mikasa_disable_irq(unsigned int irq) +mikasa_disable_irq(struct irq_data *d) { - mikasa_update_irq_hw(cached_irq_mask &= ~(1 << (irq - 16))); + mikasa_update_irq_hw(cached_irq_mask &= ~(1 << (d->irq - 16))); } static struct irq_chip mikasa_irq_type = { .name = "MIKASA", - .unmask = mikasa_enable_irq, - .mask = mikasa_disable_irq, - .mask_ack = mikasa_disable_irq, + .irq_unmask = mikasa_enable_irq, + .irq_mask = mikasa_disable_irq, + .irq_mask_ack = mikasa_disable_irq, }; static void @@ -98,8 +98,8 @@ mikasa_init_irq(void) mikasa_update_irq_hw(0); for (i = 16; i < 32; ++i) { - irq_to_desc(i)->status |= IRQ_LEVEL; set_irq_chip_and_handler(i, &mikasa_irq_type, handle_level_irq); + irq_set_status_flags(i, IRQ_LEVEL); } init_i8259a_irqs(); -- cgit v1.2.3-18-g5258 From 67436cef1926cbb2f0b4dabed5aa7fcba8a70891 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 6 Feb 2011 14:32:44 +0000 Subject: alpha: rawhide: Convert irq_chip functions Signed-off-by: Matt Turner --- arch/alpha/kernel/sys_rawhide.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/alpha/kernel/sys_rawhide.c b/arch/alpha/kernel/sys_rawhide.c index 6a51364dd1c..936d4140ed5 100644 --- a/arch/alpha/kernel/sys_rawhide.c +++ b/arch/alpha/kernel/sys_rawhide.c @@ -56,9 +56,10 @@ rawhide_update_irq_hw(int hose, int mask) (((h) < MCPCIA_MAX_HOSES) && (cached_irq_masks[(h)] != 0)) static inline void -rawhide_enable_irq(unsigned int irq) +rawhide_enable_irq(struct irq_data *d) { unsigned int mask, hose; + unsigned int irq = d->irq; irq -= 16; hose = irq / 24; @@ -76,9 +77,10 @@ rawhide_enable_irq(unsigned int irq) } static void -rawhide_disable_irq(unsigned int irq) +rawhide_disable_irq(struct irq_data *d) { unsigned int mask, hose; + unsigned int irq = d->irq; irq -= 16; hose = irq / 24; @@ -96,9 +98,10 @@ rawhide_disable_irq(unsigned int irq) } static void -rawhide_mask_and_ack_irq(unsigned int irq) +rawhide_mask_and_ack_irq(struct irq_data *d) { unsigned int mask, mask1, hose; + unsigned int irq = d->irq; irq -= 16; hose = irq / 24; @@ -123,9 +126,9 @@ rawhide_mask_and_ack_irq(unsigned int irq) static struct irq_chip rawhide_irq_type = { .name = "RAWHIDE", - .unmask = rawhide_enable_irq, - .mask = rawhide_disable_irq, - .mask_ack = rawhide_mask_and_ack_irq, + .irq_unmask = rawhide_enable_irq, + .irq_mask = rawhide_disable_irq, + .irq_mask_ack = rawhide_mask_and_ack_irq, }; static void @@ -177,8 +180,8 @@ rawhide_init_irq(void) } for (i = 16; i < 128; ++i) { - irq_to_desc(i)->status |= IRQ_LEVEL; set_irq_chip_and_handler(i, &rawhide_irq_type, handle_level_irq); + irq_set_status_flags(i, IRQ_LEVEL); } init_i8259a_irqs(); -- cgit v1.2.3-18-g5258 From 76f4645fc2011cc4bd8952befed3e74bcd77a929 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 6 Feb 2011 14:32:46 +0000 Subject: alpha: noritake: Convert irq_chip functions Signed-off-by: Thomas Gleixner Signed-off-by: Matt Turner --- arch/alpha/kernel/sys_noritake.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/alpha/kernel/sys_noritake.c b/arch/alpha/kernel/sys_noritake.c index e88f4ae1260..92bc188e94a 100644 --- a/arch/alpha/kernel/sys_noritake.c +++ b/arch/alpha/kernel/sys_noritake.c @@ -48,22 +48,22 @@ noritake_update_irq_hw(int irq, int mask) } static void -noritake_enable_irq(unsigned int irq) +noritake_enable_irq(struct irq_data *d) { - noritake_update_irq_hw(irq, cached_irq_mask |= 1 << (irq - 16)); + noritake_update_irq_hw(d->irq, cached_irq_mask |= 1 << (d->irq - 16)); } static void -noritake_disable_irq(unsigned int irq) +noritake_disable_irq(struct irq_data *d) { - noritake_update_irq_hw(irq, cached_irq_mask &= ~(1 << (irq - 16))); + noritake_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << (d->irq - 16))); } static struct irq_chip noritake_irq_type = { .name = "NORITAKE", - .unmask = noritake_enable_irq, - .mask = noritake_disable_irq, - .mask_ack = noritake_disable_irq, + .irq_unmask = noritake_enable_irq, + .irq_mask = noritake_disable_irq, + .irq_mask_ack = noritake_disable_irq, }; static void @@ -127,8 +127,8 @@ noritake_init_irq(void) outw(0, 0x54c); for (i = 16; i < 48; ++i) { - irq_to_desc(i)->status |= IRQ_LEVEL; set_irq_chip_and_handler(i, &noritake_irq_type, handle_level_irq); + irq_set_status_flags(i, IRQ_LEVEL); } init_i8259a_irqs(); -- cgit v1.2.3-18-g5258 From 2758a8af18ca4ea7148927f3a58ddcb1bf163d76 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 6 Feb 2011 14:32:49 +0000 Subject: alpha: rx164: Convert irq_chip functions Signed-off-by: Thomas Gleixner Signed-off-by: Matt Turner --- arch/alpha/kernel/sys_rx164.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/alpha/kernel/sys_rx164.c b/arch/alpha/kernel/sys_rx164.c index 89e7e37ec84..cea22a62913 100644 --- a/arch/alpha/kernel/sys_rx164.c +++ b/arch/alpha/kernel/sys_rx164.c @@ -47,22 +47,22 @@ rx164_update_irq_hw(unsigned long mask) } static inline void -rx164_enable_irq(unsigned int irq) +rx164_enable_irq(struct irq_data *d) { - rx164_update_irq_hw(cached_irq_mask |= 1UL << (irq - 16)); + rx164_update_irq_hw(cached_irq_mask |= 1UL << (d->irq - 16)); } static void -rx164_disable_irq(unsigned int irq) +rx164_disable_irq(struct irq_data *d) { - rx164_update_irq_hw(cached_irq_mask &= ~(1UL << (irq - 16))); + rx164_update_irq_hw(cached_irq_mask &= ~(1UL << (d->irq - 16))); } static struct irq_chip rx164_irq_type = { .name = "RX164", - .unmask = rx164_enable_irq, - .mask = rx164_disable_irq, - .mask_ack = rx164_disable_irq, + .irq_unmask = rx164_enable_irq, + .irq_mask = rx164_disable_irq, + .irq_mask_ack = rx164_disable_irq, }; static void @@ -99,8 +99,8 @@ rx164_init_irq(void) rx164_update_irq_hw(0); for (i = 16; i < 40; ++i) { - irq_to_desc(i)->status |= IRQ_LEVEL; set_irq_chip_and_handler(i, &rx164_irq_type, handle_level_irq); + irq_set_status_flags(i, IRQ_LEVEL); } init_i8259a_irqs(); -- cgit v1.2.3-18-g5258 From c90c10c8bf9624c95ba02228fb58e7bebe68fb1b Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 6 Feb 2011 14:32:51 +0000 Subject: alpha: sable: Convert irq_chip functions Signed-off-by: Thomas Gleixner Signed-off-by: Matt Turner --- arch/alpha/kernel/sys_sable.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/alpha/kernel/sys_sable.c b/arch/alpha/kernel/sys_sable.c index 5c4423d1b06..a349538aabc 100644 --- a/arch/alpha/kernel/sys_sable.c +++ b/arch/alpha/kernel/sys_sable.c @@ -443,11 +443,11 @@ lynx_swizzle(struct pci_dev *dev, u8 *pinp) /* GENERIC irq routines */ static inline void -sable_lynx_enable_irq(unsigned int irq) +sable_lynx_enable_irq(struct irq_data *d) { unsigned long bit, mask; - bit = sable_lynx_irq_swizzle->irq_to_mask[irq]; + bit = sable_lynx_irq_swizzle->irq_to_mask[d->irq]; spin_lock(&sable_lynx_irq_lock); mask = sable_lynx_irq_swizzle->shadow_mask &= ~(1UL << bit); sable_lynx_irq_swizzle->update_irq_hw(bit, mask); @@ -459,11 +459,11 @@ sable_lynx_enable_irq(unsigned int irq) } static void -sable_lynx_disable_irq(unsigned int irq) +sable_lynx_disable_irq(struct irq_data *d) { unsigned long bit, mask; - bit = sable_lynx_irq_swizzle->irq_to_mask[irq]; + bit = sable_lynx_irq_swizzle->irq_to_mask[d->irq]; spin_lock(&sable_lynx_irq_lock); mask = sable_lynx_irq_swizzle->shadow_mask |= 1UL << bit; sable_lynx_irq_swizzle->update_irq_hw(bit, mask); @@ -475,11 +475,11 @@ sable_lynx_disable_irq(unsigned int irq) } static void -sable_lynx_mask_and_ack_irq(unsigned int irq) +sable_lynx_mask_and_ack_irq(struct irq_data *d) { unsigned long bit, mask; - bit = sable_lynx_irq_swizzle->irq_to_mask[irq]; + bit = sable_lynx_irq_swizzle->irq_to_mask[d->irq]; spin_lock(&sable_lynx_irq_lock); mask = sable_lynx_irq_swizzle->shadow_mask |= 1UL << bit; sable_lynx_irq_swizzle->update_irq_hw(bit, mask); @@ -489,9 +489,9 @@ sable_lynx_mask_and_ack_irq(unsigned int irq) static struct irq_chip sable_lynx_irq_type = { .name = "SABLE/LYNX", - .unmask = sable_lynx_enable_irq, - .mask = sable_lynx_disable_irq, - .mask_ack = sable_lynx_mask_and_ack_irq, + .irq_unmask = sable_lynx_enable_irq, + .irq_mask = sable_lynx_disable_irq, + .irq_mask_ack = sable_lynx_mask_and_ack_irq, }; static void @@ -518,9 +518,9 @@ sable_lynx_init_irq(int nr_of_irqs) long i; for (i = 0; i < nr_of_irqs; ++i) { - irq_to_desc(i)->status |= IRQ_LEVEL; set_irq_chip_and_handler(i, &sable_lynx_irq_type, handle_level_irq); + irq_set_status_flags(i, IRQ_LEVEL); } common_init_isa_dma(); -- cgit v1.2.3-18-g5258 From b148c6146147ad9985e08ce518f032d8b01d8b30 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 6 Feb 2011 14:32:53 +0000 Subject: alpha: takara: Convert irq_chip functions Signed-off-by: Thomas Gleixner Signed-off-by: Matt Turner --- arch/alpha/kernel/sys_takara.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/alpha/kernel/sys_takara.c b/arch/alpha/kernel/sys_takara.c index f8a1e8a862f..42a5331f13c 100644 --- a/arch/alpha/kernel/sys_takara.c +++ b/arch/alpha/kernel/sys_takara.c @@ -45,16 +45,18 @@ takara_update_irq_hw(unsigned long irq, unsigned long mask) } static inline void -takara_enable_irq(unsigned int irq) +takara_enable_irq(struct irq_data *d) { + unsigned int irq = d->irq; unsigned long mask; mask = (cached_irq_mask[irq >= 64] &= ~(1UL << (irq & 63))); takara_update_irq_hw(irq, mask); } static void -takara_disable_irq(unsigned int irq) +takara_disable_irq(struct irq_data *d) { + unsigned int irq = d->irq; unsigned long mask; mask = (cached_irq_mask[irq >= 64] |= 1UL << (irq & 63)); takara_update_irq_hw(irq, mask); @@ -62,9 +64,9 @@ takara_disable_irq(unsigned int irq) static struct irq_chip takara_irq_type = { .name = "TAKARA", - .unmask = takara_enable_irq, - .mask = takara_disable_irq, - .mask_ack = takara_disable_irq, + .irq_unmask = takara_enable_irq, + .irq_mask = takara_disable_irq, + .irq_mask_ack = takara_disable_irq, }; static void @@ -136,8 +138,8 @@ takara_init_irq(void) takara_update_irq_hw(i, -1); for (i = 16; i < 128; ++i) { - irq_to_desc(i)->status |= IRQ_LEVEL; set_irq_chip_and_handler(i, &takara_irq_type, handle_level_irq); + irq_set_status_flags(i, IRQ_LEVEL); } common_init_isa_dma(); -- cgit v1.2.3-18-g5258 From 628150cae3d83136416a384b939d8a6fad52499e Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 6 Feb 2011 14:32:56 +0000 Subject: alpha: titan: Convert irq_chip functions Signed-off-by: Thomas Gleixner Signed-off-by: Matt Turner --- arch/alpha/kernel/sys_titan.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/alpha/kernel/sys_titan.c b/arch/alpha/kernel/sys_titan.c index e02494bf5ef..f6c108a3d67 100644 --- a/arch/alpha/kernel/sys_titan.c +++ b/arch/alpha/kernel/sys_titan.c @@ -112,8 +112,9 @@ titan_update_irq_hw(unsigned long mask) } static inline void -titan_enable_irq(unsigned int irq) +titan_enable_irq(struct irq_data *d) { + unsigned int irq = d->irq; spin_lock(&titan_irq_lock); titan_cached_irq_mask |= 1UL << (irq - 16); titan_update_irq_hw(titan_cached_irq_mask); @@ -121,8 +122,9 @@ titan_enable_irq(unsigned int irq) } static inline void -titan_disable_irq(unsigned int irq) +titan_disable_irq(struct irq_data *d) { + unsigned int irq = d->irq; spin_lock(&titan_irq_lock); titan_cached_irq_mask &= ~(1UL << (irq - 16)); titan_update_irq_hw(titan_cached_irq_mask); @@ -144,7 +146,8 @@ titan_cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity) } static int -titan_set_irq_affinity(unsigned int irq, const struct cpumask *affinity) +titan_set_irq_affinity(struct irq_data *d, const struct cpumask *affinity, + bool force) { spin_lock(&titan_irq_lock); titan_cpu_set_irq_affinity(irq - 16, *affinity); @@ -175,17 +178,17 @@ init_titan_irqs(struct irq_chip * ops, int imin, int imax) { long i; for (i = imin; i <= imax; ++i) { - irq_to_desc(i)->status |= IRQ_LEVEL; set_irq_chip_and_handler(i, ops, handle_level_irq); + irq_set_status_flags(i, IRQ_LEVEL); } } static struct irq_chip titan_irq_type = { - .name = "TITAN", - .unmask = titan_enable_irq, - .mask = titan_disable_irq, - .mask_ack = titan_disable_irq, - .set_affinity = titan_set_irq_affinity, + .name = "TITAN", + .irq_unmask = titan_enable_irq, + .irq_mask = titan_disable_irq, + .irq_mask_ack = titan_disable_irq, + .irq_set_affinity = titan_set_irq_affinity, }; static irqreturn_t -- cgit v1.2.3-18-g5258 From eb1e17fb9956eb3156f33cdcd880306102212661 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 6 Feb 2011 14:32:58 +0000 Subject: alpha: irq: Remove pointless irq status manipulation The irq descriptors are initialized IRQ_DISABLED in the generic code. No need to fiddle with them. Signed-off-by: Thomas Gleixner Signed-off-by: Matt Turner --- arch/alpha/kernel/irq_alpha.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/alpha/kernel/irq_alpha.c b/arch/alpha/kernel/irq_alpha.c index 2d0679b6093..411ca11d0a1 100644 --- a/arch/alpha/kernel/irq_alpha.c +++ b/arch/alpha/kernel/irq_alpha.c @@ -228,14 +228,9 @@ struct irqaction timer_irqaction = { void __init init_rtc_irq(void) { - struct irq_desc *desc = irq_to_desc(RTC_IRQ); - - if (desc) { - desc->status |= IRQ_DISABLED; - set_irq_chip_and_handler_name(RTC_IRQ, &no_irq_chip, - handle_simple_irq, "RTC"); - setup_irq(RTC_IRQ, &timer_irqaction); - } + set_irq_chip_and_handler_name(RTC_IRQ, &no_irq_chip, + handle_simple_irq, "RTC"); + setup_irq(RTC_IRQ, &timer_irqaction); } /* Dummy irqactions. */ -- cgit v1.2.3-18-g5258 From 0b534cf3e86c3fec7703173f45fcb9290b77667b Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 6 Feb 2011 14:33:00 +0000 Subject: alpha: irq: Convert affinity to use irq_data affinity is moving to irq_data. Fix it up. Signed-off-by: Thomas Gleixner Signed-off-by: Matt Turner --- arch/alpha/kernel/irq.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/alpha/kernel/irq.c b/arch/alpha/kernel/irq.c index d3e20c7bbac..a19d6008229 100644 --- a/arch/alpha/kernel/irq.c +++ b/arch/alpha/kernel/irq.c @@ -44,11 +44,16 @@ static char irq_user_affinity[NR_IRQS]; int irq_select_affinity(unsigned int irq) { - struct irq_desc *desc = irq_to_desc(irq); + struct irq_data *data = irq_get_irq_data(irq); + struct irq_chip *chip; static int last_cpu; int cpu = last_cpu + 1; - if (!desc || !get_irq_desc_chip(desc)->set_affinity || irq_user_affinity[irq]) + if (!data) + return 1; + chip = irq_data_get_irq_chip(data); + + if (!chip->irq_set_affinity || irq_user_affinity[irq]) return 1; while (!cpu_possible(cpu) || @@ -56,8 +61,8 @@ int irq_select_affinity(unsigned int irq) cpu = (cpu < (NR_CPUS-1) ? cpu + 1 : 0); last_cpu = cpu; - cpumask_copy(desc->affinity, cpumask_of(cpu)); - get_irq_desc_chip(desc)->set_affinity(irq, cpumask_of(cpu)); + cpumask_copy(data->affinity, cpumask_of(cpu)); + chip->irq_set_affinity(data, cpumask_of(cpu), false); return 0; } #endif /* CONFIG_SMP */ -- cgit v1.2.3-18-g5258 From 10e53f5834cd3b9a14e1c944a3e7ad34ee368834 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 6 Feb 2011 14:33:02 +0000 Subject: alpha: Enable GENERIC_HARDIRQS_NO_DEPRECATED All interrupt chips are converted. Mark it clean. Signed-off-by: Thomas Gleixner Signed-off-by: Matt Turner --- arch/alpha/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 47f63d48014..cc31bec2e31 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -11,6 +11,7 @@ config ALPHA select HAVE_GENERIC_HARDIRQS select GENERIC_IRQ_PROBE select AUTO_IRQ_AFFINITY if SMP + select GENERIC_HARDIRQS_NO_DEPRECATED help The Alpha is a 64-bit general-purpose processor designed and marketed by the Digital Equipment Corporation of blessed memory, -- cgit v1.2.3-18-g5258 From 60cba5a57b8affe98ea9f2bac147be0fb253d5f4 Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Thu, 24 Feb 2011 20:06:31 -0800 Subject: x86: OLPC: have prom_early_alloc BUG rather than return NULL ..similar to what sparc's prom_early_alloc does. Signed-off-by: Andres Salomon Signed-off-by: Grant Likely --- arch/x86/platform/olpc/olpc_dt.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/platform/olpc/olpc_dt.c b/arch/x86/platform/olpc/olpc_dt.c index dab87464753..044bda5b317 100644 --- a/arch/x86/platform/olpc/olpc_dt.c +++ b/arch/x86/platform/olpc/olpc_dt.c @@ -140,8 +140,7 @@ void * __init prom_early_alloc(unsigned long size) * wasted bootmem) and hand off chunks of it to callers. */ res = alloc_bootmem(chunk_size); - if (!res) - return NULL; + BUG_ON(!res); prom_early_allocated += chunk_size; memset(res, 0, chunk_size); free_mem = chunk_size; -- cgit v1.2.3-18-g5258 From faa18530b55d116ce5570b8e5be4350a5452ce69 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Wed, 2 Mar 2011 13:35:22 -0800 Subject: [IA64] Add CONFIG_MISC_DEVICES=y to configs that need it. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Uwe Kleine-König wrote: > While working on an defconfig (arm/mx27) I noticed that just updating > it results in removing CONFIG_EEPROM_AT24=y. The reason is that > since commit > > v2.6.36-5965-g5f2365d (misc devices: do not enable by default) > > MISC_DEVICES isn't enabled anymore by default. So all defconfigs that > have CONFIG_SOME_SYMBOL=y (or =m) (with SOME_SYMBOL depending on > MISC_DEVICES) but not CONFIG_MISC_DEVICES=y suffer from the same > problem. Reported-by: Uwe Kleine-König Signed-off-by: Tony Luck --- arch/ia64/configs/generic_defconfig | 1 + arch/ia64/configs/gensparse_defconfig | 1 + 2 files changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/ia64/configs/generic_defconfig b/arch/ia64/configs/generic_defconfig index 3ded8fe6275..1d7bca0a396 100644 --- a/arch/ia64/configs/generic_defconfig +++ b/arch/ia64/configs/generic_defconfig @@ -233,3 +233,4 @@ CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRC_T10DIF=y +CONFIG_MISC_DEVICES=y diff --git a/arch/ia64/configs/gensparse_defconfig b/arch/ia64/configs/gensparse_defconfig index 3a98b2dd58a..b11fa880e4b 100644 --- a/arch/ia64/configs/gensparse_defconfig +++ b/arch/ia64/configs/gensparse_defconfig @@ -208,3 +208,4 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_MUTEXES=y CONFIG_CRYPTO_MD5=y +CONFIG_MISC_DEVICES=y -- cgit v1.2.3-18-g5258 From ad7b67e5118738e49a14751944528eb26fd8d718 Mon Sep 17 00:00:00 2001 From: "Justin P. Mattock" Date: Sun, 27 Feb 2011 20:46:46 -0800 Subject: [IA64] setup.c Typo fix "Architechtuallly" s/Architechtuallly/Architecturally/ Signed-off-by: Justin P. Mattock Signed-off-by: Tony Luck --- arch/ia64/sn/kernel/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c index dbc4cbecb5e..77db0b514fa 100644 --- a/arch/ia64/sn/kernel/setup.c +++ b/arch/ia64/sn/kernel/setup.c @@ -592,7 +592,7 @@ void __cpuinit sn_cpu_init(void) /* * Don't check status. The SAL call is not supported on all PROMs * but a failure is harmless. - * Architechtuallly, cpu_init is always called twice on cpu 0. We + * Architecturally, cpu_init is always called twice on cpu 0. We * should set cpu_number on cpu 0 once. */ if (cpuid == 0) { -- cgit v1.2.3-18-g5258 From c1d036c4d1cb00b7e8473a2ad0a78f13e13a8183 Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Thu, 24 Feb 2011 17:23:09 -0500 Subject: [IA64] mca.c: Fix cast from integer to pointer warning ia64_mca_cpu_init has a void *data local variable that is assigned the value from either __get_free_pages() or mca_bootmem(). The problem is that __get_free_pages returns an unsigned long and mca_bootmem, via alloc_bootmem(), returns a void *. format_mca_init_stack takes the void *, and it's also used with __pa(), but that casts it to long anyway. This results in the following build warning: arch/ia64/kernel/mca.c:1898: warning: assignment makes pointer from integer without a cast Cast the return of __get_free_pages to a void * to avoid the warning. Signed-off-by: Jeff Mahoney Signed-off-by: Tony Luck --- arch/ia64/kernel/mca.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index e50d54e97f0..80d50b83d41 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -1861,7 +1861,8 @@ ia64_mca_cpu_init(void *cpu_data) data = mca_bootmem(); first_time = 0; } else - data = __get_free_pages(GFP_KERNEL, get_order(sz)); + data = (void *)__get_free_pages(GFP_KERNEL, + get_order(sz)); if (!data) panic("Could not allocate MCA memory for cpu %d\n", cpu); -- cgit v1.2.3-18-g5258 From b4a6b3436531f6c5256e6d60d388c3c28ff1a0e9 Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Thu, 24 Feb 2011 15:33:24 -0500 Subject: [IA64] tioca: Fix assignment from incompatible pointer warnings The prototype for sn_pci_provider->{dma_map,dma_map_consistent} expects an unsigned long instead of a u64. Signed-off-by: Jeff Mahoney Signed-off-by: Tony Luck --- arch/ia64/sn/pci/tioca_provider.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/sn/pci/tioca_provider.c b/arch/ia64/sn/pci/tioca_provider.c index 4d4536e3b6f..9c271be9919 100644 --- a/arch/ia64/sn/pci/tioca_provider.c +++ b/arch/ia64/sn/pci/tioca_provider.c @@ -509,7 +509,7 @@ tioca_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir) * use the GART mapped mode. */ static u64 -tioca_dma_map(struct pci_dev *pdev, u64 paddr, size_t byte_count, int dma_flags) +tioca_dma_map(struct pci_dev *pdev, unsigned long paddr, size_t byte_count, int dma_flags) { u64 mapaddr; -- cgit v1.2.3-18-g5258 From 790ab7e92bec24aee3939b300d36b99ab2e3f3ca Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Thu, 3 Mar 2011 06:41:46 +0800 Subject: arm: omap: fix section mismatch warning WARNING: arch/arm/plat-omap/built-in.o(.data+0x6d4): Section mismatch in reference from the variable omap_driver to the function .init.text:omap_cpu_init() The variable omap_driver references the function __init omap_cpu_init() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Signed-off-by: Ming Lei Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/cpu-omap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c index 11c54ec8d47..da4f68dbba1 100644 --- a/arch/arm/plat-omap/cpu-omap.c +++ b/arch/arm/plat-omap/cpu-omap.c @@ -101,7 +101,7 @@ static int omap_target(struct cpufreq_policy *policy, return ret; } -static int __init omap_cpu_init(struct cpufreq_policy *policy) +static int __cpuinit omap_cpu_init(struct cpufreq_policy *policy) { int result = 0; -- cgit v1.2.3-18-g5258 From f463effebefb26f1dffb92d10725e938f4497bef Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 24 Feb 2011 12:56:42 +0000 Subject: ldp: Fix regulator mapping for ads7846 TS controller On the OMAP3430LDP board, the ads7846 touchscreen controller is powered by VAUX1 regulator (supplying 3.0v). Fix this mapping in the board file, and hence prevent the ads7846 driver init to fail with the below error.. ads7846 spi1.0: unable to get regulator: -19 Signed-off-by: Rajendra Nayak Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-ldp.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index a69e59455ee..e2ba77957a8 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -327,6 +327,26 @@ static struct regulator_init_data ldp_vmmc1 = { .consumer_supplies = &ldp_vmmc1_supply, }; +/* ads7846 on SPI */ +static struct regulator_consumer_supply ldp_vaux1_supplies[] = { + REGULATOR_SUPPLY("vcc", "spi1.0"), +}; + +/* VAUX1 */ +static struct regulator_init_data ldp_vaux1 = { + .constraints = { + .min_uV = 3000000, + .max_uV = 3000000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(ldp_vaux1_supplies), + .consumer_supplies = ldp_vaux1_supplies, +}; + static struct twl4030_platform_data ldp_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, @@ -335,6 +355,7 @@ static struct twl4030_platform_data ldp_twldata = { .madc = &ldp_madc_data, .usb = &ldp_usb_data, .vmmc1 = &ldp_vmmc1, + .vaux1 = &ldp_vaux1, .gpio = &ldp_gpio_data, .keypad = &ldp_kp_twl4030_data, }; -- cgit v1.2.3-18-g5258 From ec179ea5361cdd34bf4e6d6bdfe02d6f4d6901b2 Mon Sep 17 00:00:00 2001 From: Guy Eilam Date: Fri, 25 Feb 2011 06:52:35 +0000 Subject: omap: panda: Add TI-ST driver support Added the KIM (Kernel initialization module for the Shared Transport driver) device entry in the board file Only the Blutooth enable GPIO is set for now Signed-off-by: Guy Eilam Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-omap4panda.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 3dd241b9515..4ff9877f316 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -50,6 +50,16 @@ #define GPIO_WIFI_PMENA 43 #define GPIO_WIFI_IRQ 53 +/* wl127x BT, FM, GPS connectivity chip */ +static int wl1271_gpios[] = {46, -1, -1}; +static struct platform_device wl1271_device = { + .name = "kim", + .id = -1, + .dev = { + .platform_data = &wl1271_gpios, + }, +}; + static struct gpio_led gpio_leds[] = { { .name = "pandaboard::status1", @@ -78,6 +88,7 @@ static struct platform_device leds_gpio = { static struct platform_device *panda_devices[] __initdata = { &leds_gpio, + &wl1271_device, }; static void __init omap4_panda_init_early(void) -- cgit v1.2.3-18-g5258 From b7a834cc7d08276bf080077b3499d88f73e303ba Mon Sep 17 00:00:00 2001 From: Ilkka Koskinen Date: Fri, 25 Feb 2011 08:46:23 +0000 Subject: omap: rx51: Add support for vibra Add support for vibra Signed-off-by: Ilkka Koskinen Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-rx51-peripherals.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index d0998f81269..7839e9493c7 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -742,6 +742,14 @@ static struct twl4030_power_data rx51_t2scripts_data __initdata = { .resource_config = twl4030_rconfig, }; +struct twl4030_codec_vibra_data rx51_vibra_data __initdata = { + .coexist = 0, +}; + +struct twl4030_codec_data rx51_codec_data __initdata = { + .audio_mclk = 26000000, + .vibra = &rx51_vibra_data, +}; static struct twl4030_platform_data rx51_twldata __initdata = { .irq_base = TWL4030_IRQ_BASE, @@ -753,6 +761,7 @@ static struct twl4030_platform_data rx51_twldata __initdata = { .madc = &rx51_madc_data, .usb = &rx51_usb_data, .power = &rx51_t2scripts_data, + .codec = &rx51_codec_data, .vaux1 = &rx51_vaux1, .vaux2 = &rx51_vaux2, -- cgit v1.2.3-18-g5258 From 6a58baf8f222f60cded29770ff9a0f6f6c100b64 Mon Sep 17 00:00:00 2001 From: Ilkka Koskinen Date: Wed, 2 Mar 2011 13:24:05 +0000 Subject: omap: Remove unnecessary twl4030_codec_audio settings from board files twl4030_codec_audio and twl4030_codec_vibra_data has unused field. In order to remove it, corresponding settings needs to be removed from board files. Signed-off-by: Ilkka Koskinen Acked-by: Peter Ujfalusi Acked-by: Mark Brown Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-3430sdp.c | 4 +--- arch/arm/mach-omap2/board-devkit8000.c | 4 +--- arch/arm/mach-omap2/board-igep0020.c | 4 +--- arch/arm/mach-omap2/board-omap3beagle.c | 4 +--- arch/arm/mach-omap2/board-omap3evm.c | 4 +--- arch/arm/mach-omap2/board-omap3pandora.c | 4 +--- arch/arm/mach-omap2/board-omap3stalker.c | 4 +--- arch/arm/mach-omap2/board-omap3touchbook.c | 4 +--- arch/arm/mach-omap2/board-overo.c | 4 +--- arch/arm/mach-omap2/board-zoom-peripherals.c | 4 +--- 10 files changed, 10 insertions(+), 30 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index b12b62064e7..95b1a9c19ba 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -552,9 +552,7 @@ static struct regulator_init_data sdp3430_vpll2 = { .consumer_supplies = sdp3430_vpll2_supplies, }; -static struct twl4030_codec_audio_data sdp3430_audio = { - .audio_mclk = 26000000, -}; +static struct twl4030_codec_audio_data sdp3430_audio; static struct twl4030_codec_data sdp3430_codec = { .audio_mclk = 26000000, diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 54abdd06436..ddf5f04f22d 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -342,9 +342,7 @@ static struct twl4030_usb_data devkit8000_usb_data = { .usb_mode = T2_USB_MODE_ULPI, }; -static struct twl4030_codec_audio_data devkit8000_audio_data = { - .audio_mclk = 26000000, -}; +static struct twl4030_codec_audio_data devkit8000_audio_data; static struct twl4030_codec_data devkit8000_codec_data = { .audio_mclk = 26000000, diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 54e6318f4a8..a0d6f2ff9a9 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -521,9 +521,7 @@ static void __init igep2_init_early(void) m65kxxxxam_sdrc_params); } -static struct twl4030_codec_audio_data igep2_audio_data = { - .audio_mclk = 26000000, -}; +static struct twl4030_codec_audio_data igep2_audio_data; static struct twl4030_codec_data igep2_codec_data = { .audio_mclk = 26000000, diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index a1faea3b776..b6752ac5b97 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -427,9 +427,7 @@ static struct twl4030_usb_data beagle_usb_data = { .usb_mode = T2_USB_MODE_ULPI, }; -static struct twl4030_codec_audio_data beagle_audio_data = { - .audio_mclk = 26000000, -}; +static struct twl4030_codec_audio_data beagle_audio_data; static struct twl4030_codec_data beagle_codec_data = { .audio_mclk = 26000000, diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 3d9b58a53c9..a8b1fefc63d 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -534,9 +534,7 @@ static struct twl4030_madc_platform_data omap3evm_madc_data = { .irq_line = 1, }; -static struct twl4030_codec_audio_data omap3evm_audio_data = { - .audio_mclk = 26000000, -}; +static struct twl4030_codec_audio_data omap3evm_audio_data; static struct twl4030_codec_data omap3evm_codec_data = { .audio_mclk = 26000000, diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 17ef5479c7f..137f89dd5e4 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -516,9 +516,7 @@ static struct twl4030_usb_data omap3pandora_usb_data = { .usb_mode = T2_USB_MODE_ULPI, }; -static struct twl4030_codec_audio_data omap3pandora_audio_data = { - .audio_mclk = 26000000, -}; +static struct twl4030_codec_audio_data omap3pandora_audio_data; static struct twl4030_codec_data omap3pandora_codec_data = { .audio_mclk = 26000000, diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index fd8b7649b14..15ede8b4981 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -431,9 +431,7 @@ static struct twl4030_madc_platform_data omap3stalker_madc_data = { .irq_line = 1, }; -static struct twl4030_codec_audio_data omap3stalker_audio_data = { - .audio_mclk = 26000000, -}; +static struct twl4030_codec_audio_data omap3stalker_audio_data; static struct twl4030_codec_data omap3stalker_codec_data = { .audio_mclk = 26000000, diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 8e2a7ba4153..5554f5814aa 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -252,9 +252,7 @@ static struct twl4030_usb_data touchbook_usb_data = { .usb_mode = T2_USB_MODE_ULPI, }; -static struct twl4030_codec_audio_data touchbook_audio_data = { - .audio_mclk = 26000000, -}; +static struct twl4030_codec_audio_data touchbook_audio_data; static struct twl4030_codec_data touchbook_codec_data = { .audio_mclk = 26000000, diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index d480ddb3952..60f8db31763 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -358,9 +358,7 @@ static struct regulator_init_data overo_vmmc1 = { .consumer_supplies = &overo_vmmc1_supply, }; -static struct twl4030_codec_audio_data overo_audio_data = { - .audio_mclk = 26000000, -}; +static struct twl4030_codec_audio_data overo_audio_data; static struct twl4030_codec_data overo_codec_data = { .audio_mclk = 26000000, diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index e0e040f34c6..1ac9d353b7a 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -322,9 +322,7 @@ static struct twl4030_madc_platform_data zoom_madc_data = { .irq_line = 1, }; -static struct twl4030_codec_audio_data zoom_audio_data = { - .audio_mclk = 26000000, -}; +static struct twl4030_codec_audio_data zoom_audio_data; static struct twl4030_codec_data zoom_codec_data = { .audio_mclk = 26000000, -- cgit v1.2.3-18-g5258 From 2ce30137094969123a8846ca4f68c2628ea4a658 Mon Sep 17 00:00:00 2001 From: Banajit Goswami Date: Mon, 28 Feb 2011 22:24:51 +0530 Subject: ARM: SAMSUNG: Move PWM device definition from plat-s3c24xx to plat-samsung This patch does the following:- 1. It moves file pwm.c from plat-s3c24xx to plat-samsung. This will enable all machines with Samsung SoCs to make use of the same code. 2. The device definitions have been separated to a new file dev-pwm.c for better clarity and structure. 3. It will enable all Samsung S3C and S5P series SoC's to use common PWM Kconfig definition. Signed-off-by: Banajit Goswami Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/Kconfig | 4 ++-- arch/arm/plat-s3c24xx/Kconfig | 7 ------ arch/arm/plat-samsung/Kconfig | 13 ++++++++++ arch/arm/plat-samsung/Makefile | 1 + arch/arm/plat-samsung/dev-pwm.c | 53 +++++++++++++++++++++++++++++++++++++++++ arch/arm/plat-samsung/pwm.c | 33 ------------------------- 6 files changed, 69 insertions(+), 42 deletions(-) create mode 100644 arch/arm/plat-samsung/dev-pwm.c (limited to 'arch') diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index 579d2f0f4dd..f3a953f02dd 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -231,7 +231,7 @@ config MACH_HMT select S3C_DEV_NAND select S3C_DEV_USB_HOST select S3C64XX_SETUP_FB_24BPP - select HAVE_PWM + select SAMSUNG_DEV_PWM help Machine support for the Airgoo HMT @@ -249,8 +249,8 @@ config MACH_SMARTQ select S3C64XX_SETUP_SDHCI select S3C64XX_SETUP_FB_24BPP select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_PWM select SAMSUNG_DEV_TS - select HAVE_PWM help Shared machine support for SmartQ 5/7 diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index eb105e61c74..d9c4096ebf4 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -56,13 +56,6 @@ config S3C24XX_DCLK help Clock code for supporting DCLK/CLKOUT on S3C24XX architectures -config S3C24XX_PWM - bool "PWM device support" - select HAVE_PWM - help - Support for exporting the PWM timer blocks via the pwm device - system. - # gpio configurations config S3C24XX_GPIO_EXTRA diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 32be05cf82a..be72100b81b 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -273,6 +273,19 @@ config SAMSUNG_DEV_KEYPAD help Compile in platform device definitions for keypad +config SAMSUNG_DEV_PWM + bool + default y if ARCH_S3C2410 + help + Compile in platform device definition for PWM Timer + +config S3C24XX_PWM + bool "PWM device support" + select HAVE_PWM + help + Support for exporting the PWM timer blocks via the pwm device + system + # DMA config S3C_DMA diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 29932f88a8d..e9de58a2e29 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -59,6 +59,7 @@ obj-$(CONFIG_SAMSUNG_DEV_ADC) += dev-adc.o obj-$(CONFIG_SAMSUNG_DEV_IDE) += dev-ide.o obj-$(CONFIG_SAMSUNG_DEV_TS) += dev-ts.o obj-$(CONFIG_SAMSUNG_DEV_KEYPAD) += dev-keypad.o +obj-$(CONFIG_SAMSUNG_DEV_PWM) += dev-pwm.o # DMA support diff --git a/arch/arm/plat-samsung/dev-pwm.c b/arch/arm/plat-samsung/dev-pwm.c new file mode 100644 index 00000000000..dab47b0e190 --- /dev/null +++ b/arch/arm/plat-samsung/dev-pwm.c @@ -0,0 +1,53 @@ +/* linux/arch/arm/plat-samsung/dev-pwm.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Copyright (c) 2007 Ben Dooks + * Copyright (c) 2008 Simtec Electronics + * Ben Dooks , + * + * S3C series device definition for the PWM timer + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + +#include + +#include + +#define TIMER_RESOURCE_SIZE (1) + +#define TIMER_RESOURCE(_tmr, _irq) \ + (struct resource [TIMER_RESOURCE_SIZE]) { \ + [0] = { \ + .start = _irq, \ + .end = _irq, \ + .flags = IORESOURCE_IRQ \ + } \ + } + +#define DEFINE_S3C_TIMER(_tmr_no, _irq) \ + .name = "s3c24xx-pwm", \ + .id = _tmr_no, \ + .num_resources = TIMER_RESOURCE_SIZE, \ + .resource = TIMER_RESOURCE(_tmr_no, _irq), \ + +/* + * since we already have an static mapping for the timer, + * we do not bother setting any IO resource for the base. + */ + +struct platform_device s3c_device_timer[] = { + [0] = { DEFINE_S3C_TIMER(0, IRQ_TIMER0) }, + [1] = { DEFINE_S3C_TIMER(1, IRQ_TIMER1) }, + [2] = { DEFINE_S3C_TIMER(2, IRQ_TIMER2) }, + [3] = { DEFINE_S3C_TIMER(3, IRQ_TIMER3) }, + [4] = { DEFINE_S3C_TIMER(4, IRQ_TIMER4) }, +}; +EXPORT_SYMBOL(s3c_device_timer); diff --git a/arch/arm/plat-samsung/pwm.c b/arch/arm/plat-samsung/pwm.c index 2eeb49fa056..f37457c5206 100644 --- a/arch/arm/plat-samsung/pwm.c +++ b/arch/arm/plat-samsung/pwm.c @@ -20,10 +20,8 @@ #include #include -#include #include -#include #include struct pwm_device { @@ -47,37 +45,6 @@ struct pwm_device { static struct clk *clk_scaler[2]; -/* Standard setup for a timer block. */ - -#define TIMER_RESOURCE_SIZE (1) - -#define TIMER_RESOURCE(_tmr, _irq) \ - (struct resource [TIMER_RESOURCE_SIZE]) { \ - [0] = { \ - .start = _irq, \ - .end = _irq, \ - .flags = IORESOURCE_IRQ \ - } \ - } - -#define DEFINE_S3C_TIMER(_tmr_no, _irq) \ - .name = "s3c24xx-pwm", \ - .id = _tmr_no, \ - .num_resources = TIMER_RESOURCE_SIZE, \ - .resource = TIMER_RESOURCE(_tmr_no, _irq), \ - -/* since we already have an static mapping for the timer, we do not - * bother setting any IO resource for the base. - */ - -struct platform_device s3c_device_timer[] = { - [0] = { DEFINE_S3C_TIMER(0, IRQ_TIMER0) }, - [1] = { DEFINE_S3C_TIMER(1, IRQ_TIMER1) }, - [2] = { DEFINE_S3C_TIMER(2, IRQ_TIMER2) }, - [3] = { DEFINE_S3C_TIMER(3, IRQ_TIMER3) }, - [4] = { DEFINE_S3C_TIMER(4, IRQ_TIMER4) }, -}; - static inline int pwm_is_tdiv(struct pwm_device *pwm) { return clk_get_parent(pwm->clk) == pwm->clk_div; -- cgit v1.2.3-18-g5258 From 075d108989f71e6c7c287c258ebc3faf53066458 Mon Sep 17 00:00:00 2001 From: Banajit Goswami Date: Mon, 28 Feb 2011 17:42:35 +0530 Subject: ARM: SAMSUNG: Add PWM backlight support on Samsung S3C6410 This patch adds support for LCD backlight using PWM timer for Samsung SMDK6410 board. Signed-off-by: Banajit Goswami Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/Kconfig | 1 + arch/arm/mach-s3c64xx/mach-smdk6410.c | 46 ++++++++++++++++++++++++++++++++--- 2 files changed, 44 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index f3a953f02dd..e4177e22557 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -143,6 +143,7 @@ config MACH_SMDK6410 select S3C_DEV_USB_HSOTG select S3C_DEV_WDT select SAMSUNG_DEV_KEYPAD + select SAMSUNG_DEV_PWM select HAVE_S3C2410_WATCHDOG if WATCHDOG select S3C64XX_SETUP_SDHCI select S3C64XX_SETUP_I2C1 diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index e85192a86fb..6639cced5f7 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -28,6 +28,7 @@ #include #include #include +#include #ifdef CONFIG_SMDK6410_WM1190_EV1 #include @@ -48,6 +49,7 @@ #include #include #include +#include #include #include @@ -118,7 +120,6 @@ static void smdk6410_lcd_power_set(struct plat_lcd_data *pd, { if (power) { gpio_direction_output(S3C64XX_GPF(13), 1); - gpio_direction_output(S3C64XX_GPF(15), 1); /* fire nRESET on power up */ gpio_direction_output(S3C64XX_GPN(5), 0); @@ -126,7 +127,6 @@ static void smdk6410_lcd_power_set(struct plat_lcd_data *pd, gpio_direction_output(S3C64XX_GPN(5), 1); msleep(1); } else { - gpio_direction_output(S3C64XX_GPF(15), 0); gpio_direction_output(S3C64XX_GPF(13), 0); } } @@ -269,6 +269,45 @@ static struct samsung_keypad_platdata smdk6410_keypad_data __initdata = { .cols = 8, }; +static int smdk6410_backlight_init(struct device *dev) +{ + int ret; + + ret = gpio_request(S3C64XX_GPF(15), "Backlight"); + if (ret) { + printk(KERN_ERR "failed to request GPF for PWM-OUT1\n"); + return ret; + } + + /* Configure GPIO pin with S3C64XX_GPF15_PWM_TOUT1 */ + s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2)); + + return 0; +} + +static void smdk6410_backlight_exit(struct device *dev) +{ + s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_OUTPUT); + gpio_free(S3C64XX_GPF(15)); +} + +static struct platform_pwm_backlight_data smdk6410_backlight_data = { + .pwm_id = 1, + .max_brightness = 255, + .dft_brightness = 255, + .pwm_period_ns = 78770, + .init = smdk6410_backlight_init, + .exit = smdk6410_backlight_exit, +}; + +static struct platform_device smdk6410_backlight_device = { + .name = "pwm-backlight", + .dev = { + .parent = &s3c_device_timer[1].dev, + .platform_data = &smdk6410_backlight_data, + }, +}; + static struct map_desc smdk6410_iodesc[] = {}; static struct platform_device *smdk6410_devices[] __initdata = { @@ -298,6 +337,8 @@ static struct platform_device *smdk6410_devices[] __initdata = { &s3c_device_rtc, &s3c_device_ts, &s3c_device_wdt, + &s3c_device_timer[1], + &smdk6410_backlight_device, }; #ifdef CONFIG_REGULATOR @@ -693,7 +734,6 @@ static void __init smdk6410_machine_init(void) gpio_request(S3C64XX_GPN(5), "LCD power"); gpio_request(S3C64XX_GPF(13), "LCD power"); - gpio_request(S3C64XX_GPF(15), "LCD power"); i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0)); i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); -- cgit v1.2.3-18-g5258 From fec524aa05775b1582644f54842c6a30a9b7bbe5 Mon Sep 17 00:00:00 2001 From: Banajit Goswami Date: Mon, 28 Feb 2011 20:31:27 +0530 Subject: ARM: SAMSUNG: Add PWM backlight support on Samsung S5P6440 This patch adds support for LCD backlight control using PWM timer for Samsung SMDK6440 board. Signed-off-by: Banajit Goswami Signed-off-by: Kukjin Kim --- arch/arm/mach-s5p64x0/Kconfig | 1 + arch/arm/mach-s5p64x0/mach-smdk6440.c | 43 +++++++++++++++++++++++++++++++++++ 2 files changed, 44 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig index 164d2783d38..be5888a0e20 100644 --- a/arch/arm/mach-s5p64x0/Kconfig +++ b/arch/arm/mach-s5p64x0/Kconfig @@ -34,6 +34,7 @@ config MACH_SMDK6440 select S3C_DEV_WDT select S3C64XX_DEV_SPI select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_PWM select SAMSUNG_DEV_TS select S5P64X0_SETUP_I2C1 help diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c index e5beb84e239..366dca4ec79 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6440.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -32,6 +33,7 @@ #include #include #include +#include #include #include @@ -88,6 +90,45 @@ static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = { }, }; +static int smdk6440_backlight_init(struct device *dev) +{ + int ret; + + ret = gpio_request(S5P6440_GPF(15), "Backlight"); + if (ret) { + printk(KERN_ERR "failed to request GPF for PWM-OUT1\n"); + return ret; + } + + /* Configure GPIO pin with S5P6440_GPF15_PWM_TOUT1 */ + s3c_gpio_cfgpin(S5P6440_GPF(15), S3C_GPIO_SFN(2)); + + return 0; +} + +static void smdk6440_backlight_exit(struct device *dev) +{ + s3c_gpio_cfgpin(S5P6440_GPF(15), S3C_GPIO_OUTPUT); + gpio_free(S5P6440_GPF(15)); +} + +static struct platform_pwm_backlight_data smdk6440_backlight_data = { + .pwm_id = 1, + .max_brightness = 255, + .dft_brightness = 255, + .pwm_period_ns = 78770, + .init = smdk6440_backlight_init, + .exit = smdk6440_backlight_exit, +}; + +static struct platform_device smdk6440_backlight_device = { + .name = "pwm-backlight", + .dev = { + .parent = &s3c_device_timer[1].dev, + .platform_data = &smdk6440_backlight_data, + }, +}; + static struct platform_device *smdk6440_devices[] __initdata = { &s3c_device_adc, &s3c_device_rtc, @@ -97,6 +138,8 @@ static struct platform_device *smdk6440_devices[] __initdata = { &s3c_device_wdt, &samsung_asoc_dma, &s5p6440_device_iis, + &s3c_device_timer[1], + &smdk6440_backlight_device, }; static struct s3c2410_platform_i2c s5p6440_i2c0_data __initdata = { -- cgit v1.2.3-18-g5258 From b0fd644f444c680838140aff4e766389ee6ad9a3 Mon Sep 17 00:00:00 2001 From: Banajit Goswami Date: Mon, 28 Feb 2011 23:31:17 +0530 Subject: ARM: SAMSUNG: Add PWM backlight support on Samsung S5P6450 This patch adds support for LCD backlight control using PWM timer for Samsung SMDK6450 board. Signed-off-by: Banajit Goswami Signed-off-by: Kukjin Kim --- arch/arm/mach-s5p64x0/Kconfig | 1 + arch/arm/mach-s5p64x0/mach-smdk6450.c | 43 +++++++++++++++++++++++++++++++++++ 2 files changed, 44 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig index be5888a0e20..08b0a5bf1d6 100644 --- a/arch/arm/mach-s5p64x0/Kconfig +++ b/arch/arm/mach-s5p64x0/Kconfig @@ -48,6 +48,7 @@ config MACH_SMDK6450 select S3C_DEV_WDT select S3C64XX_DEV_SPI select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_PWM select SAMSUNG_DEV_TS select S5P64X0_SETUP_I2C1 help diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c index 3a20de0a926..1d8f9fd5af3 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6450.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -32,6 +33,7 @@ #include #include #include +#include #include #include @@ -106,6 +108,45 @@ static struct s3c2410_uartcfg smdk6450_uartcfgs[] __initdata = { #endif }; +static int smdk6450_backlight_init(struct device *dev) +{ + int ret; + + ret = gpio_request(S5P6450_GPF(15), "Backlight"); + if (ret) { + printk(KERN_ERR "failed to request GPF for PWM-OUT1\n"); + return ret; + } + + /* Configure GPIO pin with S5P6450_GPF15_PWM_TOUT1 */ + s3c_gpio_cfgpin(S5P6450_GPF(15), S3C_GPIO_SFN(2)); + + return 0; +} + +static void smdk6450_backlight_exit(struct device *dev) +{ + s3c_gpio_cfgpin(S5P6450_GPF(15), S3C_GPIO_OUTPUT); + gpio_free(S5P6450_GPF(15)); +} + +static struct platform_pwm_backlight_data smdk6450_backlight_data = { + .pwm_id = 1, + .max_brightness = 255, + .dft_brightness = 255, + .pwm_period_ns = 78770, + .init = smdk6450_backlight_init, + .exit = smdk6450_backlight_exit, +}; + +static struct platform_device smdk6450_backlight_device = { + .name = "pwm-backlight", + .dev = { + .parent = &s3c_device_timer[1].dev, + .platform_data = &smdk6450_backlight_data, + }, +}; + static struct platform_device *smdk6450_devices[] __initdata = { &s3c_device_adc, &s3c_device_rtc, @@ -115,6 +156,8 @@ static struct platform_device *smdk6450_devices[] __initdata = { &s3c_device_wdt, &samsung_asoc_dma, &s5p6450_device_iis0, + &s3c_device_timer[1], + &smdk6450_backlight_device, /* s5p6450_device_spi0 will be added */ }; -- cgit v1.2.3-18-g5258 From baa0c0609307e46531e9d5d6f5b9a510ceb8e30c Mon Sep 17 00:00:00 2001 From: Banajit Goswami Date: Mon, 28 Feb 2011 20:37:21 +0530 Subject: ARM: SAMSUNG: Add PWM backlight support on Samsung S5PC100 This patch adds support for LCD backlight using PWM timer for Samsung SMDKC100 board. Signed-off-by: Banajit Goswami Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pc100/Kconfig | 1 + arch/arm/mach-s5pc100/mach-smdkc100.c | 48 ++++++++++++++++++++++++++++++++--- 2 files changed, 45 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig index b8fbf2fcba6..608722ff4f2 100644 --- a/arch/arm/mach-s5pc100/Kconfig +++ b/arch/arm/mach-s5pc100/Kconfig @@ -58,6 +58,7 @@ config MACH_SMDKC100 select SAMSUNG_DEV_ADC select SAMSUNG_DEV_IDE select SAMSUNG_DEV_KEYPAD + select SAMSUNG_DEV_PWM select SAMSUNG_DEV_TS select S5PC100_SETUP_FB_24BPP select S5PC100_SETUP_I2C1 diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c index dd192a27524..0525cb3ef40 100644 --- a/arch/arm/mach-s5pc100/mach-smdkc100.c +++ b/arch/arm/mach-s5pc100/mach-smdkc100.c @@ -23,12 +23,15 @@ #include #include #include +#include #include #include #include #include +#include + #include