From ff741906ad3cf4b8ca1a958acb013a97a6381ca2 Mon Sep 17 00:00:00 2001 From: Ashok Raj Date: Fri, 11 Nov 2005 14:32:40 -0800 Subject: [IA64] support for cpu0 removal here is the BSP removal support for IA64. Its pretty much the same thing that was released a while back, but has your feedback incorporated. - Removed CONFIG_BSP_REMOVE_WORKAROUND and associated cmdline param - Fixed compile issue with sn2/zx1 due to a undefined fix_b0_for_bsp - some formatting nits (whitespace etc) This has been tested on tiger and long back by alex on hp systems as well. Signed-off-by: Ashok Raj Signed-off-by: Tony Luck --- arch/ia64/Kconfig | 19 +++++++ arch/ia64/configs/tiger_defconfig | 2 + arch/ia64/kernel/acpi.c | 12 ++-- arch/ia64/kernel/iosapic.c | 6 ++ arch/ia64/kernel/irq.c | 13 ++++- arch/ia64/kernel/mca.c | 6 +- arch/ia64/kernel/perfmon.c | 5 +- arch/ia64/kernel/smpboot.c | 114 ++++++++++++++++++++++++++++++++++++-- arch/ia64/kernel/time.c | 9 ++- arch/ia64/mm/contig.c | 4 +- arch/ia64/mm/discontig.c | 9 ++- 11 files changed, 181 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 199eeaf0f4e..5e0f58e37c5 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -272,6 +272,25 @@ config SCHED_SMT Intel IA64 chips with MultiThreading at a cost of slightly increased overhead in some places. If unsure say N here. +config PERMIT_BSP_REMOVE + bool "Support removal of Bootstrap Processor" + depends on HOTPLUG_CPU + default n + ---help--- + Say Y here if your platform SAL will support removal of BSP with HOTPLUG_CPU + support. + +config FORCE_CPEI_RETARGET + bool "Force assumption that CPEI can be re-targetted" + depends on PERMIT_BSP_REMOVE + default n + ---help--- + Say Y if you need to force the assumption that CPEI can be re-targetted to + any cpu in the system. This hint is available via ACPI 3.0 specifications. + Tiger4 systems are capable of re-directing CPEI to any CPU other than BSP. + This option it useful to enable this feature on older BIOS's as well. + You can also enable this by using boot command line option force_cpei=1. + config PREEMPT bool "Preemptible Kernel" help diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig index b1e8f09e9fd..aed034d3397 100644 --- a/arch/ia64/configs/tiger_defconfig +++ b/arch/ia64/configs/tiger_defconfig @@ -114,6 +114,8 @@ CONFIG_FORCE_MAX_ZONEORDER=17 CONFIG_SMP=y CONFIG_NR_CPUS=4 CONFIG_HOTPLUG_CPU=y +CONFIG_PERMIT_BSP_REMOVE=y +CONFIG_FORCE_CPEI_RETARGET=y # CONFIG_SCHED_SMT is not set # CONFIG_PREEMPT is not set CONFIG_SELECT_MEMORY_MODEL=y diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 9ad94ddf668..fe1d90b0c6e 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -287,16 +287,20 @@ acpi_parse_plat_int_src(acpi_table_entry_header * header, unsigned int can_cpei_retarget(void) { extern int cpe_vector; + extern unsigned int force_cpei_retarget; /* * Only if CPEI is supported and the override flag * is present, otherwise return that its re-targettable * if we are in polling mode. */ - if (cpe_vector > 0 && !acpi_cpei_override) - return 0; - else - return 1; + if (cpe_vector > 0) { + if (acpi_cpei_override || force_cpei_retarget) + return 1; + else + return 0; + } + return 1; } unsigned int is_cpu_cpei_target(unsigned int cpu) diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c index 574084f343f..37ac742da8e 100644 --- a/arch/ia64/kernel/iosapic.c +++ b/arch/ia64/kernel/iosapic.c @@ -631,6 +631,7 @@ get_target_cpu (unsigned int gsi, int vector) { #ifdef CONFIG_SMP static int cpu = -1; + extern int cpe_vector; /* * In case of vector shared by multiple RTEs, all RTEs that @@ -653,6 +654,11 @@ get_target_cpu (unsigned int gsi, int vector) if (!cpu_online(smp_processor_id())) return cpu_physical_id(smp_processor_id()); +#ifdef CONFIG_ACPI + if (cpe_vector > 0 && vector == IA64_CPEP_VECTOR) + return get_cpei_target_cpu(); +#endif + #ifdef CONFIG_NUMA { int num_cpus, cpu_index, iosapic_index, numa_cpu, i = 0; diff --git a/arch/ia64/kernel/irq.c b/arch/ia64/kernel/irq.c index d33244c3275..5ce908ef9c9 100644 --- a/arch/ia64/kernel/irq.c +++ b/arch/ia64/kernel/irq.c @@ -163,8 +163,19 @@ void fixup_irqs(void) { unsigned int irq; extern void ia64_process_pending_intr(void); + extern void ia64_disable_timer(void); + extern volatile int time_keeper_id; + + ia64_disable_timer(); + + /* + * Find a new timesync master + */ + if (smp_processor_id() == time_keeper_id) { + time_keeper_id = first_cpu(cpu_online_map); + printk ("CPU %d is now promoted to time-keeper master\n", time_keeper_id); + } - ia64_set_itv(1<<16); /* * Phase 1: Locate irq's bound to this cpu and * relocate them for cpu removal. diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index 355af15287c..967571b466a 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -289,6 +289,7 @@ ia64_mca_log_sal_error_record(int sal_info_type) #ifdef CONFIG_ACPI int cpe_vector = -1; +int ia64_cpe_irq = -1; static irqreturn_t ia64_mca_cpe_int_handler (int cpe_irq, void *arg, struct pt_regs *ptregs) @@ -1444,11 +1445,13 @@ void __devinit ia64_mca_cpu_init(void *cpu_data) { void *pal_vaddr; + static int first_time = 1; - if (smp_processor_id() == 0) { + if (first_time) { void *mca_data; int cpu; + first_time = 0; mca_data = alloc_bootmem(sizeof(struct ia64_mca_cpu) * NR_CPUS + KERNEL_STACK_SIZE); mca_data = (void *)(((unsigned long)mca_data + @@ -1704,6 +1707,7 @@ ia64_mca_late_init(void) desc = irq_descp(irq); desc->status |= IRQ_PER_CPU; setup_irq(irq, &mca_cpe_irqaction); + ia64_cpe_irq = irq; } ia64_mca_register_cpev(cpe_vector); IA64_MCA_DEBUG("%s: CPEI/P setup and enabled.\n", __FUNCTION__); diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index 410d4804fa6..18c51c37a9a 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -6718,6 +6718,7 @@ __initcall(pfm_init); void pfm_init_percpu (void) { + static int first_time=1; /* * make sure no measurement is active * (may inherit programmed PMCs from EFI). @@ -6730,8 +6731,10 @@ pfm_init_percpu (void) */ pfm_unfreeze_pmu(); - if (smp_processor_id() == 0) + if (first_time) { register_percpu_irq(IA64_PERFMON_VECTOR, &perfmon_irqaction); + first_time=0; + } ia64_setreg(_IA64_REG_CR_PMV, IA64_PERFMON_VECTOR); ia64_srlz_d(); diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c index 8f44e7d2df6..e9d37bf67d6 100644 --- a/arch/ia64/kernel/smpboot.c +++ b/arch/ia64/kernel/smpboot.c @@ -70,6 +70,12 @@ #endif #ifdef CONFIG_HOTPLUG_CPU +#ifdef CONFIG_PERMIT_BSP_REMOVE +#define bsp_remove_ok 1 +#else +#define bsp_remove_ok 0 +#endif + /* * Store all idle threads, this can be reused instead of creating * a new thread. Also avoids complicated thread destroy functionality @@ -104,7 +110,7 @@ struct sal_to_os_boot *sal_state_for_booting_cpu = &sal_boot_rendez_state[0]; /* * ITC synchronization related stuff: */ -#define MASTER 0 +#define MASTER (0) #define SLAVE (SMP_CACHE_BYTES/8) #define NUM_ROUNDS 64 /* magic value */ @@ -151,6 +157,27 @@ char __initdata no_int_routing; unsigned char smp_int_redirect; /* are INT and IPI redirectable by the chipset? */ +#ifdef CONFIG_FORCE_CPEI_RETARGET +#define CPEI_OVERRIDE_DEFAULT (1) +#else +#define CPEI_OVERRIDE_DEFAULT (0) +#endif + +unsigned int force_cpei_retarget = CPEI_OVERRIDE_DEFAULT; + +static int __init +cmdl_force_cpei(char *str) +{ + int value=0; + + get_option (&str, &value); + force_cpei_retarget = value; + + return 1; +} + +__setup("force_cpei=", cmdl_force_cpei); + static int __init nointroute (char *str) { @@ -161,6 +188,27 @@ nointroute (char *str) __setup("nointroute", nointroute); +static void fix_b0_for_bsp(void) +{ +#ifdef CONFIG_HOTPLUG_CPU + int cpuid; + static int fix_bsp_b0 = 1; + + cpuid = smp_processor_id(); + + /* + * Cache the b0 value on the first AP that comes up + */ + if (!(fix_bsp_b0 && cpuid)) + return; + + sal_boot_rendez_state[0].br[0] = sal_boot_rendez_state[cpuid].br[0]; + printk ("Fixed BSP b0 value from CPU %d\n", cpuid); + + fix_bsp_b0 = 0; +#endif +} + void sync_master (void *arg) { @@ -327,8 +375,9 @@ smp_setup_percpu_timer (void) static void __devinit smp_callin (void) { - int cpuid, phys_id; + int cpuid, phys_id, itc_master; extern void ia64_init_itm(void); + extern volatile int time_keeper_id; #ifdef CONFIG_PERFMON extern void pfm_init_percpu(void); @@ -336,6 +385,7 @@ smp_callin (void) cpuid = smp_processor_id(); phys_id = hard_smp_processor_id(); + itc_master = time_keeper_id; if (cpu_online(cpuid)) { printk(KERN_ERR "huh, phys CPU#0x%x, CPU#0x%x already present??\n", @@ -343,6 +393,8 @@ smp_callin (void) BUG(); } + fix_b0_for_bsp(); + lock_ipi_calllock(); cpu_set(cpuid, cpu_online_map); unlock_ipi_calllock(); @@ -365,8 +417,8 @@ smp_callin (void) * calls spin_unlock_bh(), which calls spin_unlock_bh(), which calls * local_bh_enable(), which bugs out if irqs are not enabled... */ - Dprintk("Going to syncup ITC with BP.\n"); - ia64_sync_itc(0); + Dprintk("Going to syncup ITC with ITC Master.\n"); + ia64_sync_itc(itc_master); } /* @@ -638,6 +690,47 @@ remove_siblinginfo(int cpu) } extern void fixup_irqs(void); + +int migrate_platform_irqs(unsigned int cpu) +{ + int new_cpei_cpu; + irq_desc_t *desc = NULL; + cpumask_t mask; + int retval = 0; + + /* + * dont permit CPEI target to removed. + */ + if (cpe_vector > 0 && is_cpu_cpei_target(cpu)) { + printk ("CPU (%d) is CPEI Target\n", cpu); + if (can_cpei_retarget()) { + /* + * Now re-target the CPEI to a different processor + */ + new_cpei_cpu = any_online_cpu(cpu_online_map); + mask = cpumask_of_cpu(new_cpei_cpu); + set_cpei_target_cpu(new_cpei_cpu); + desc = irq_descp(ia64_cpe_irq); + /* + * Switch for now, immediatly, we need to do fake intr + * as other interrupts, but need to study CPEI behaviour with + * polling before making changes. + */ + if (desc) { + desc->handler->disable(ia64_cpe_irq); + desc->handler->set_affinity(ia64_cpe_irq, mask); + desc->handler->enable(ia64_cpe_irq); + printk ("Re-targetting CPEI to cpu %d\n", new_cpei_cpu); + } + } + if (!desc) { + printk ("Unable to retarget CPEI, offline cpu [%d] failed\n", cpu); + retval = -EBUSY; + } + } + return retval; +} + /* must be called with cpucontrol mutex held */ int __cpu_disable(void) { @@ -646,8 +739,17 @@ int __cpu_disable(void) /* * dont permit boot processor for now */ - if (cpu == 0) - return -EBUSY; + if (cpu == 0 && !bsp_remove_ok) { + printk ("Your platform does not support removal of BSP\n"); + return (-EBUSY); + } + + cpu_clear(cpu, cpu_online_map); + + if (migrate_platform_irqs(cpu)) { + cpu_set(cpu, cpu_online_map); + return (-EBUSY); + } remove_siblinginfo(cpu); cpu_clear(cpu, cpu_online_map); diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c index 028a2b95936..1ca130a8385 100644 --- a/arch/ia64/kernel/time.c +++ b/arch/ia64/kernel/time.c @@ -32,7 +32,7 @@ extern unsigned long wall_jiffies; -#define TIME_KEEPER_ID 0 /* smp_processor_id() of time-keeper */ +volatile int time_keeper_id = 0; /* smp_processor_id() of time-keeper */ #ifdef CONFIG_IA64_DEBUG_IRQ @@ -71,7 +71,7 @@ timer_interrupt (int irq, void *dev_id, struct pt_regs *regs) new_itm += local_cpu_data->itm_delta; - if (smp_processor_id() == TIME_KEEPER_ID) { + if (smp_processor_id() == time_keeper_id) { /* * Here we are in the timer irq handler. We have irqs locally * disabled, but we don't know if the timer_bh is running on @@ -236,6 +236,11 @@ static struct irqaction timer_irqaction = { .name = "timer" }; +void __devinit ia64_disable_timer(void) +{ + ia64_set_itv(1 << 16); +} + void __init time_init (void) { diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c index acaaec4e468..9855ba31809 100644 --- a/arch/ia64/mm/contig.c +++ b/arch/ia64/mm/contig.c @@ -181,13 +181,15 @@ per_cpu_init (void) { void *cpu_data; int cpu; + static int first_time=1; /* * get_free_pages() cannot be used before cpu_init() done. BSP * allocates "NR_CPUS" pages for all CPUs to avoid that AP calls * get_zeroed_page(). */ - if (smp_processor_id() == 0) { + if (first_time) { + first_time=0; cpu_data = __alloc_bootmem(PERCPU_PAGE_SIZE * NR_CPUS, PERCPU_PAGE_SIZE, __pa(MAX_DMA_ADDRESS)); for (cpu = 0; cpu < NR_CPUS; cpu++) { diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c index c87d6d1d581..573d5cc63e2 100644 --- a/arch/ia64/mm/discontig.c +++ b/arch/ia64/mm/discontig.c @@ -528,12 +528,17 @@ void __init find_memory(void) void *per_cpu_init(void) { int cpu; + static int first_time = 1; + if (smp_processor_id() != 0) return __per_cpu_start + __per_cpu_offset[smp_processor_id()]; - for (cpu = 0; cpu < NR_CPUS; cpu++) - per_cpu(local_per_cpu_offset, cpu) = __per_cpu_offset[cpu]; + if (first_time) { + first_time = 0; + for (cpu = 0; cpu < NR_CPUS; cpu++) + per_cpu(local_per_cpu_offset, cpu) = __per_cpu_offset[cpu]; + } return __per_cpu_start + __per_cpu_offset[smp_processor_id()]; } -- cgit v1.2.3-18-g5258 From b88e926584bf100bc23f5e76b7b674d4257edcb0 Mon Sep 17 00:00:00 2001 From: Ashok Raj Date: Thu, 19 Jan 2006 16:18:47 -0800 Subject: [IA64] Fix UP build with BSP removal support. Causes undefined force_cpei_retarget defined in arch/ia64/kernel/smpboot.c Push the unneeded code inside #ifdef CONFIG_HOTPLUG_CPU. Signed-off-by: Ashok Raj Signed-off-by: Tony Luck --- arch/ia64/kernel/acpi.c | 2 ++ arch/ia64/kernel/iosapic.c | 4 ++-- arch/ia64/kernel/topology.c | 2 +- 3 files changed, 5 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index fe1d90b0c6e..8d350b33a20 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -284,6 +284,7 @@ acpi_parse_plat_int_src(acpi_table_entry_header * header, return 0; } +#ifdef CONFIG_HOTPLUG_CPU unsigned int can_cpei_retarget(void) { extern int cpe_vector; @@ -319,6 +320,7 @@ void set_cpei_target_cpu(unsigned int cpu) { acpi_cpei_phys_cpuid = cpu_physical_id(cpu); } +#endif unsigned int get_cpei_target_cpu(void) { diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c index 37ac742da8e..8832c553230 100644 --- a/arch/ia64/kernel/iosapic.c +++ b/arch/ia64/kernel/iosapic.c @@ -655,8 +655,8 @@ get_target_cpu (unsigned int gsi, int vector) return cpu_physical_id(smp_processor_id()); #ifdef CONFIG_ACPI - if (cpe_vector > 0 && vector == IA64_CPEP_VECTOR) - return get_cpei_target_cpu(); + if (cpe_vector > 0 && vector == IA64_CPEP_VECTOR) + return get_cpei_target_cpu(); #endif #ifdef CONFIG_NUMA diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c index 706b7734e19..c9562d94b9c 100644 --- a/arch/ia64/kernel/topology.c +++ b/arch/ia64/kernel/topology.c @@ -36,7 +36,7 @@ int arch_register_cpu(int num) parent = &sysfs_nodes[cpu_to_node(num)]; #endif /* CONFIG_NUMA */ -#ifdef CONFIG_ACPI +#if defined (CONFIG_ACPI) && defined (CONFIG_HOTPLUG_CPU) /* * If CPEI cannot be re-targetted, and this is * CPEI target, then dont create the control file -- cgit v1.2.3-18-g5258 From 63dafe5728e7354bc3f15bd49f13f1f9a433e8fb Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Sat, 14 Jan 2006 16:57:39 -0600 Subject: [PATCH] powerpc: Updated Initial MPC8540 ADS port with OF Flat Dev Updated patch for support for mpc8540_ads in arch/powerpc with a flat OF device tree. This patch does not yet support PCI or I2C. Signed-off-by: Becky Bruce Signed-off-by: Jon Loeliger Signed-off-by: Kumar Gala Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 23 +- arch/powerpc/configs/mpc8540_ads_defconfig | 721 +++++++++++++++++++++++++++++ arch/powerpc/kernel/head_booke.h | 363 +++++++++++++++ arch/powerpc/platforms/85xx/Kconfig | 74 +-- arch/powerpc/platforms/85xx/Makefile | 5 +- arch/powerpc/platforms/85xx/mpc8540_ads.h | 60 +++ arch/powerpc/platforms/85xx/mpc85xx.c | 31 ++ arch/powerpc/platforms/85xx/mpc85xx.h | 17 + arch/powerpc/platforms/85xx/mpc85xx_ads.c | 208 +++++++++ arch/powerpc/platforms/Makefile | 2 +- 10 files changed, 1431 insertions(+), 73 deletions(-) create mode 100644 arch/powerpc/configs/mpc8540_ads_defconfig create mode 100644 arch/powerpc/kernel/head_booke.h create mode 100644 arch/powerpc/platforms/85xx/mpc8540_ads.h create mode 100644 arch/powerpc/platforms/85xx/mpc85xx.c create mode 100644 arch/powerpc/platforms/85xx/mpc85xx.h create mode 100644 arch/powerpc/platforms/85xx/mpc85xx_ads.c (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index df338c5cc91..8aa39d073df 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -121,6 +121,12 @@ config PPC_83xx select 83xx select PPC_FPU +config PPC_85xx + bool "Freescale 85xx" + select E500 + select FSL_SOC + select 85xx + config 40x bool "AMCC 40x" @@ -133,8 +139,6 @@ config 8xx config E200 bool "Freescale e200" -config E500 - bool "Freescale e500" endchoice config POWER4_ONLY @@ -162,6 +166,13 @@ config 6xx config 83xx bool +# this is temp to handle compat with arch=ppc +config 85xx + bool + +config E500 + bool + config PPC_FPU bool default y if PPC64 @@ -211,6 +222,7 @@ config ALTIVEC config SPE bool "SPE Support" depends on E200 || E500 + default y ---help--- This option enables kernel support for the Signal Processing Extensions (SPE) to the PowerPC processor. The kernel currently @@ -728,13 +740,12 @@ config GENERIC_ISA_DMA config PPC_I8259 bool - default y if 85xx default n config PPC_INDIRECT_PCI bool depends on PCI - default y if 40x || 44x || 85xx + default y if 40x || 44x default n config EISA @@ -751,8 +762,8 @@ config MCA bool config PCI - bool "PCI support" if 40x || CPM2 || PPC_83xx || 85xx || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES) - default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx && !85xx + bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES) + default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx && !PPC_85xx default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS default PCI_QSPAN if !4xx && !CPM2 && 8xx help diff --git a/arch/powerpc/configs/mpc8540_ads_defconfig b/arch/powerpc/configs/mpc8540_ads_defconfig new file mode 100644 index 00000000000..2a8290ee15c --- /dev/null +++ b/arch/powerpc/configs/mpc8540_ads_defconfig @@ -0,0 +1,721 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: +# Sat Jan 14 15:57:54 2006 +# +# CONFIG_PPC64 is not set +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set + +# +# Processor support +# +# CONFIG_CLASSIC32 is not set +# CONFIG_PPC_52xx is not set +# CONFIG_PPC_82xx is not set +# CONFIG_PPC_83xx is not set +CONFIG_PPC_85xx=y +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_8xx is not set +# CONFIG_E200 is not set +CONFIG_85xx=y +CONFIG_E500=y +CONFIG_BOOKE=y +CONFIG_FSL_BOOKE=y +# CONFIG_PHYS_64BIT is not set +CONFIG_SPE=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_MPIC=y +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Platform support +# +CONFIG_MPC8540_ADS=y +CONFIG_MPC8540=y +CONFIG_PPC_INDIRECT_PCI_BE=y + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_MISC=y +CONFIG_MATH_EMULATION=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +# CONFIG_SOFTWARE_SUSPEND is not set +# CONFIG_SECCOMP is not set +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +# CONFIG_PPC_I8259 is not set +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_FSL_SOC=y +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Macintosh device drivers +# +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y + +# +# Ethernet (1000 Mbit) +# +CONFIG_GIANFAR=y +CONFIG_GFAR_NAPI=y + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +# CONFIG_MSDOS_PARTITION is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set + +# +# Instrumentation Support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_DEBUGGER is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_PPC_EARLY_DEBUG_LPAR is not set +# CONFIG_PPC_EARLY_DEBUG_G5 is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS is not set +# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set +# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h new file mode 100644 index 00000000000..5827c27e0b5 --- /dev/null +++ b/arch/powerpc/kernel/head_booke.h @@ -0,0 +1,363 @@ +#ifndef __HEAD_BOOKE_H__ +#define __HEAD_BOOKE_H__ + +/* + * Macros used for common Book-e exception handling + */ + +#define SET_IVOR(vector_number, vector_label) \ + li r26,vector_label@l; \ + mtspr SPRN_IVOR##vector_number,r26; \ + sync + +#define NORMAL_EXCEPTION_PROLOG \ + mtspr SPRN_SPRG0,r10; /* save two registers to work with */\ + mtspr SPRN_SPRG1,r11; \ + mtspr SPRN_SPRG4W,r1; \ + mfcr r10; /* save CR in r10 for now */\ + mfspr r11,SPRN_SRR1; /* check whether user or kernel */\ + andi. r11,r11,MSR_PR; \ + beq 1f; \ + mfspr r1,SPRN_SPRG3; /* if from user, start at top of */\ + lwz r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack */\ + addi r1,r1,THREAD_SIZE; \ +1: subi r1,r1,INT_FRAME_SIZE; /* Allocate an exception frame */\ + mr r11,r1; \ + stw r10,_CCR(r11); /* save various registers */\ + stw r12,GPR12(r11); \ + stw r9,GPR9(r11); \ + mfspr r10,SPRN_SPRG0; \ + stw r10,GPR10(r11); \ + mfspr r12,SPRN_SPRG1; \ + stw r12,GPR11(r11); \ + mflr r10; \ + stw r10,_LINK(r11); \ + mfspr r10,SPRN_SPRG4R; \ + mfspr r12,SPRN_SRR0; \ + stw r10,GPR1(r11); \ + mfspr r9,SPRN_SRR1; \ + stw r10,0(r11); \ + rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\ + stw r0,GPR0(r11); \ + SAVE_4GPRS(3, r11); \ + SAVE_2GPRS(7, r11) + +/* To handle the additional exception priority levels on 40x and Book-E + * processors we allocate a 4k stack per additional priority level. The various + * head_xxx.S files allocate space (exception_stack_top) for each priority's + * stack times the number of CPUs + * + * On 40x critical is the only additional level + * On 44x/e500 we have critical and machine check + * On e200 we have critical and debug (machine check occurs via critical) + * + * Additionally we reserve a SPRG for each priority level so we can free up a + * GPR to use as the base for indirect access to the exception stacks. This + * is necessary since the MMU is always on, for Book-E parts, and the stacks + * are offset from KERNELBASE. + * + */ +#define BOOKE_EXCEPTION_STACK_SIZE (8192) + +/* CRIT_SPRG only used in critical exception handling */ +#define CRIT_SPRG SPRN_SPRG2 +/* MCHECK_SPRG only used in machine check exception handling */ +#define MCHECK_SPRG SPRN_SPRG6W + +#define MCHECK_STACK_TOP (exception_stack_top - 4096) +#define CRIT_STACK_TOP (exception_stack_top) + +/* only on e200 for now */ +#define DEBUG_STACK_TOP (exception_stack_top - 4096) +#define DEBUG_SPRG SPRN_SPRG6W + +#ifdef CONFIG_SMP +#define BOOKE_LOAD_EXC_LEVEL_STACK(level) \ + mfspr r8,SPRN_PIR; \ + mulli r8,r8,BOOKE_EXCEPTION_STACK_SIZE; \ + neg r8,r8; \ + addis r8,r8,level##_STACK_TOP@ha; \ + addi r8,r8,level##_STACK_TOP@l +#else +#define BOOKE_LOAD_EXC_LEVEL_STACK(level) \ + lis r8,level##_STACK_TOP@h; \ + ori r8,r8,level##_STACK_TOP@l +#endif + +/* + * Exception prolog for critical/machine check exceptions. This is a + * little different from the normal exception prolog above since a + * critical/machine check exception can potentially occur at any point + * during normal exception processing. Thus we cannot use the same SPRG + * registers as the normal prolog above. Instead we use a portion of the + * critical/machine check exception stack at low physical addresses. + */ +#define EXC_LEVEL_EXCEPTION_PROLOG(exc_level, exc_level_srr0, exc_level_srr1) \ + mtspr exc_level##_SPRG,r8; \ + BOOKE_LOAD_EXC_LEVEL_STACK(exc_level);/* r8 points to the exc_level stack*/ \ + stw r10,GPR10-INT_FRAME_SIZE(r8); \ + stw r11,GPR11-INT_FRAME_SIZE(r8); \ + mfcr r10; /* save CR in r10 for now */\ + mfspr r11,exc_level_srr1; /* check whether user or kernel */\ + andi. r11,r11,MSR_PR; \ + mr r11,r8; \ + mfspr r8,exc_level##_SPRG; \ + beq 1f; \ + /* COMING FROM USER MODE */ \ + mfspr r11,SPRN_SPRG3; /* if from user, start at top of */\ + lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\ + addi r11,r11,THREAD_SIZE; \ +1: subi r11,r11,INT_FRAME_SIZE; /* Allocate an exception frame */\ + stw r10,_CCR(r11); /* save various registers */\ + stw r12,GPR12(r11); \ + stw r9,GPR9(r11); \ + mflr r10; \ + stw r10,_LINK(r11); \ + mfspr r12,SPRN_DEAR; /* save DEAR and ESR in the frame */\ + stw r12,_DEAR(r11); /* since they may have had stuff */\ + mfspr r9,SPRN_ESR; /* in them at the point where the */\ + stw r9,_ESR(r11); /* exception was taken */\ + mfspr r12,exc_level_srr0; \ + stw r1,GPR1(r11); \ + mfspr r9,exc_level_srr1; \ + stw r1,0(r11); \ + mr r1,r11; \ + rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\ + stw r0,GPR0(r11); \ + SAVE_4GPRS(3, r11); \ + SAVE_2GPRS(7, r11) + +#define CRITICAL_EXCEPTION_PROLOG \ + EXC_LEVEL_EXCEPTION_PROLOG(CRIT, SPRN_CSRR0, SPRN_CSRR1) +#define DEBUG_EXCEPTION_PROLOG \ + EXC_LEVEL_EXCEPTION_PROLOG(DEBUG, SPRN_DSRR0, SPRN_DSRR1) +#define MCHECK_EXCEPTION_PROLOG \ + EXC_LEVEL_EXCEPTION_PROLOG(MCHECK, SPRN_MCSRR0, SPRN_MCSRR1) + +/* + * Exception vectors. + */ +#define START_EXCEPTION(label) \ + .align 5; \ +label: + +#define FINISH_EXCEPTION(func) \ + bl transfer_to_handler_full; \ + .long func; \ + .long ret_from_except_full + +#define EXCEPTION(n, label, hdlr, xfer) \ + START_EXCEPTION(label); \ + NORMAL_EXCEPTION_PROLOG; \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + xfer(n, hdlr) + +#define CRITICAL_EXCEPTION(n, label, hdlr) \ + START_EXCEPTION(label); \ + CRITICAL_EXCEPTION_PROLOG; \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \ + NOCOPY, crit_transfer_to_handler, \ + ret_from_crit_exc) + +#define MCHECK_EXCEPTION(n, label, hdlr) \ + START_EXCEPTION(label); \ + MCHECK_EXCEPTION_PROLOG; \ + mfspr r5,SPRN_ESR; \ + stw r5,_ESR(r11); \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \ + NOCOPY, mcheck_transfer_to_handler, \ + ret_from_mcheck_exc) + +#define EXC_XFER_TEMPLATE(hdlr, trap, msr, copyee, tfer, ret) \ + li r10,trap; \ + stw r10,_TRAP(r11); \ + lis r10,msr@h; \ + ori r10,r10,msr@l; \ + copyee(r10, r9); \ + bl tfer; \ + .long hdlr; \ + .long ret + +#define COPY_EE(d, s) rlwimi d,s,0,16,16 +#define NOCOPY(d, s) + +#define EXC_XFER_STD(n, hdlr) \ + EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, NOCOPY, transfer_to_handler_full, \ + ret_from_except_full) + +#define EXC_XFER_LITE(n, hdlr) \ + EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \ + ret_from_except) + +#define EXC_XFER_EE(n, hdlr) \ + EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, COPY_EE, transfer_to_handler_full, \ + ret_from_except_full) + +#define EXC_XFER_EE_LITE(n, hdlr) \ + EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, COPY_EE, transfer_to_handler, \ + ret_from_except) + +/* Check for a single step debug exception while in an exception + * handler before state has been saved. This is to catch the case + * where an instruction that we are trying to single step causes + * an exception (eg ITLB/DTLB miss) and thus the first instruction of + * the exception handler generates a single step debug exception. + * + * If we get a debug trap on the first instruction of an exception handler, + * we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is + * a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR). + * The exception handler was handling a non-critical interrupt, so it will + * save (and later restore) the MSR via SPRN_CSRR1, which will still have + * the MSR_DE bit set. + */ +#ifdef CONFIG_E200 +#define DEBUG_EXCEPTION \ + START_EXCEPTION(Debug); \ + DEBUG_EXCEPTION_PROLOG; \ + \ + /* \ + * If there is a single step or branch-taken exception in an \ + * exception entry sequence, it was probably meant to apply to \ + * the code where the exception occurred (since exception entry \ + * doesn't turn off DE automatically). We simulate the effect \ + * of turning off DE on entry to an exception handler by turning \ + * off DE in the CSRR1 value and clearing the debug status. \ + */ \ + mfspr r10,SPRN_DBSR; /* check single-step/branch taken */ \ + andis. r10,r10,DBSR_IC@h; \ + beq+ 2f; \ + \ + lis r10,KERNELBASE@h; /* check if exception in vectors */ \ + ori r10,r10,KERNELBASE@l; \ + cmplw r12,r10; \ + blt+ 2f; /* addr below exception vectors */ \ + \ + lis r10,Debug@h; \ + ori r10,r10,Debug@l; \ + cmplw r12,r10; \ + bgt+ 2f; /* addr above exception vectors */ \ + \ + /* here it looks like we got an inappropriate debug exception. */ \ +1: rlwinm r9,r9,0,~MSR_DE; /* clear DE in the CDRR1 value */ \ + lis r10,DBSR_IC@h; /* clear the IC event */ \ + mtspr SPRN_DBSR,r10; \ + /* restore state and get out */ \ + lwz r10,_CCR(r11); \ + lwz r0,GPR0(r11); \ + lwz r1,GPR1(r11); \ + mtcrf 0x80,r10; \ + mtspr SPRN_DSRR0,r12; \ + mtspr SPRN_DSRR1,r9; \ + lwz r9,GPR9(r11); \ + lwz r12,GPR12(r11); \ + mtspr DEBUG_SPRG,r8; \ + BOOKE_LOAD_EXC_LEVEL_STACK(DEBUG); /* r8 points to the debug stack */ \ + lwz r10,GPR10-INT_FRAME_SIZE(r8); \ + lwz r11,GPR11-INT_FRAME_SIZE(r8); \ + mfspr r8,DEBUG_SPRG; \ + \ + RFDI; \ + b .; \ + \ + /* continue normal handling for a critical exception... */ \ +2: mfspr r4,SPRN_DBSR; \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, debug_transfer_to_handler, ret_from_debug_exc) +#else +#define DEBUG_EXCEPTION \ + START_EXCEPTION(Debug); \ + CRITICAL_EXCEPTION_PROLOG; \ + \ + /* \ + * If there is a single step or branch-taken exception in an \ + * exception entry sequence, it was probably meant to apply to \ + * the code where the exception occurred (since exception entry \ + * doesn't turn off DE automatically). We simulate the effect \ + * of turning off DE on entry to an exception handler by turning \ + * off DE in the CSRR1 value and clearing the debug status. \ + */ \ + mfspr r10,SPRN_DBSR; /* check single-step/branch taken */ \ + andis. r10,r10,DBSR_IC@h; \ + beq+ 2f; \ + \ + lis r10,KERNELBASE@h; /* check if exception in vectors */ \ + ori r10,r10,KERNELBASE@l; \ + cmplw r12,r10; \ + blt+ 2f; /* addr below exception vectors */ \ + \ + lis r10,Debug@h; \ + ori r10,r10,Debug@l; \ + cmplw r12,r10; \ + bgt+ 2f; /* addr above exception vectors */ \ + \ + /* here it looks like we got an inappropriate debug exception. */ \ +1: rlwinm r9,r9,0,~MSR_DE; /* clear DE in the CSRR1 value */ \ + lis r10,DBSR_IC@h; /* clear the IC event */ \ + mtspr SPRN_DBSR,r10; \ + /* restore state and get out */ \ + lwz r10,_CCR(r11); \ + lwz r0,GPR0(r11); \ + lwz r1,GPR1(r11); \ + mtcrf 0x80,r10; \ + mtspr SPRN_CSRR0,r12; \ + mtspr SPRN_CSRR1,r9; \ + lwz r9,GPR9(r11); \ + lwz r12,GPR12(r11); \ + mtspr CRIT_SPRG,r8; \ + BOOKE_LOAD_EXC_LEVEL_STACK(CRIT); /* r8 points to the debug stack */ \ + lwz r10,GPR10-INT_FRAME_SIZE(r8); \ + lwz r11,GPR11-INT_FRAME_SIZE(r8); \ + mfspr r8,CRIT_SPRG; \ + \ + rfci; \ + b .; \ + \ + /* continue normal handling for a critical exception... */ \ +2: mfspr r4,SPRN_DBSR; \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, crit_transfer_to_handler, ret_from_crit_exc) +#endif + +#define INSTRUCTION_STORAGE_EXCEPTION \ + START_EXCEPTION(InstructionStorage) \ + NORMAL_EXCEPTION_PROLOG; \ + mfspr r5,SPRN_ESR; /* Grab the ESR and save it */ \ + stw r5,_ESR(r11); \ + mr r4,r12; /* Pass SRR0 as arg2 */ \ + li r5,0; /* Pass zero as arg3 */ \ + EXC_XFER_EE_LITE(0x0400, handle_page_fault) + +#define ALIGNMENT_EXCEPTION \ + START_EXCEPTION(Alignment) \ + NORMAL_EXCEPTION_PROLOG; \ + mfspr r4,SPRN_DEAR; /* Grab the DEAR and save it */ \ + stw r4,_DEAR(r11); \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + EXC_XFER_EE(0x0600, alignment_exception) + +#define PROGRAM_EXCEPTION \ + START_EXCEPTION(Program) \ + NORMAL_EXCEPTION_PROLOG; \ + mfspr r4,SPRN_ESR; /* Grab the ESR and save it */ \ + stw r4,_ESR(r11); \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + EXC_XFER_STD(0x0700, program_check_exception) + +#define DECREMENTER_EXCEPTION \ + START_EXCEPTION(Decrementer) \ + NORMAL_EXCEPTION_PROLOG; \ + lis r0,TSR_DIS@h; /* Setup the DEC interrupt mask */ \ + mtspr SPRN_TSR,r0; /* Clear the DEC interrupt */ \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + EXC_XFER_LITE(0x0900, timer_interrupt) + +#define FP_UNAVAILABLE_EXCEPTION \ + START_EXCEPTION(FloatingPointUnavailable) \ + NORMAL_EXCEPTION_PROLOG; \ + bne load_up_fpu; /* if from user, just load it up */ \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + EXC_XFER_EE_LITE(0x800, KernelFP) + +#endif /* __HEAD_BOOKE_H__ */ diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index c5bc2821d99..d3d0ff745e8 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -1,86 +1,30 @@ -config 85xx - bool - depends on E500 - default y - -config PPC_INDIRECT_PCI_BE - bool - depends on 85xx - default y - -menu "Freescale 85xx options" - depends on E500 +menu "Platform support" + depends on PPC_85xx choice prompt "Machine Type" - depends on 85xx default MPC8540_ADS config MPC8540_ADS bool "Freescale MPC8540 ADS" help - This option enables support for the MPC 8540 ADS evaluation board. - -config MPC8548_CDS - bool "Freescale MPC8548 CDS" - help - This option enablese support for the MPC8548 CDS evaluation board. - -config MPC8555_CDS - bool "Freescale MPC8555 CDS" - help - This option enablese support for the MPC8555 CDS evaluation board. - -config MPC8560_ADS - bool "Freescale MPC8560 ADS" - help - This option enables support for the MPC 8560 ADS evaluation board. - -config SBC8560 - bool "WindRiver PowerQUICC III SBC8560" - help - This option enables support for the WindRiver PowerQUICC III - SBC8560 board. - -config STX_GP3 - bool "Silicon Turnkey Express GP3" - help - This option enables support for the Silicon Turnkey Express GP3 - board. + This option enables support for the MPC 8540 ADS board endchoice -# It's often necessary to know the specific 85xx processor type. -# Fortunately, it is implied (so far) from the board type, so we -# don't need to ask more redundant questions. config MPC8540 bool - depends on MPC8540_ADS - default y - -config MPC8548 - bool - depends on MPC8548_CDS - default y + select PPC_UDBG_16550 + select PPC_INDIRECT_PCI + default y if MPC8540_ADS -config MPC8555 - bool - depends on MPC8555_CDS - default y - -config MPC8560 +config PPC_INDIRECT_PCI_BE bool - depends on SBC8560 || MPC8560_ADS || STX_GP3 - default y - -config 85xx_PCI2 - bool "Supprt for 2nd PCI host controller" - depends on MPC8555_CDS + depends on PPC_85xx default y -config PPC_GEN550 +config MPIC bool - depends on MPC8540 || SBC8560 || MPC8555 default y endmenu diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index 6407197ffd8..b443206e61a 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -1 +1,4 @@ -# empty makefile so make clean works +# +# Makefile for the PowerPC 85xx linux kernel. +# +obj-$(CONFIG_PPC_85xx) += mpc85xx.o mpc85xx_ads.o diff --git a/arch/powerpc/platforms/85xx/mpc8540_ads.h b/arch/powerpc/platforms/85xx/mpc8540_ads.h new file mode 100644 index 00000000000..47609c97e01 --- /dev/null +++ b/arch/powerpc/platforms/85xx/mpc8540_ads.h @@ -0,0 +1,60 @@ +/* + * arch/ppc/platforms/85xx/mpc8540_ads.h + * + * MPC8540ADS board definitions + * + * Maintainer: Kumar Gala + * + * Copyright 2004 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __MACH_MPC8540ADS_H__ +#define __MACH_MPC8540ADS_H__ + +#include +#include + +#define BOARD_CCSRBAR ((uint)0xe0000000) +#define BCSR_ADDR ((uint)0xf8000000) +#define BCSR_SIZE ((uint)(32 * 1024)) + +/* PCI interrupt controller */ +#define PIRQA MPC85xx_IRQ_EXT1 +#define PIRQB MPC85xx_IRQ_EXT2 +#define PIRQC MPC85xx_IRQ_EXT3 +#define PIRQD MPC85xx_IRQ_EXT4 + +#define MPC85XX_PCI1_LOWER_IO 0x00000000 +#define MPC85XX_PCI1_UPPER_IO 0x00ffffff + +#define MPC85XX_PCI1_LOWER_MEM 0x80000000 +#define MPC85XX_PCI1_UPPER_MEM 0x9fffffff + +#define MPC85XX_PCI1_IO_BASE 0xe2000000 +#define MPC85XX_PCI1_MEM_OFFSET 0x00000000 + +#define MPC85XX_PCI1_IO_SIZE 0x01000000 + +/* PCI config */ +#define PCI1_CFG_ADDR_OFFSET (0x8000) +#define PCI1_CFG_DATA_OFFSET (0x8004) + +#define PCI2_CFG_ADDR_OFFSET (0x9000) +#define PCI2_CFG_DATA_OFFSET (0x9004) + +/* Additional register for PCI-X configuration */ +#define PCIX_NEXT_CAP 0x60 +#define PCIX_CAP_ID 0x61 +#define PCIX_COMMAND 0x62 +#define PCIX_STATUS 0x64 + +/* Offset of CPM register space */ +#define CPM_MAP_ADDR (CCSRBAR + MPC85xx_CPM_OFFSET) + +#endif /* __MACH_MPC8540ADS_H__ */ diff --git a/arch/powerpc/platforms/85xx/mpc85xx.c b/arch/powerpc/platforms/85xx/mpc85xx.c new file mode 100644 index 00000000000..82510385d88 --- /dev/null +++ b/arch/powerpc/platforms/85xx/mpc85xx.c @@ -0,0 +1,31 @@ +/* + * MPC85xx generic code. + * + * Maintained by Kumar Gala (see MAINTAINERS for contact information) + * + * Copyright 2005 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include +#include +#include + +extern void abort(void); + +void +mpc85xx_restart(char *cmd) +{ + local_irq_disable(); + abort(); +} + +/* For now this is a pass through */ +phys_addr_t fixup_bigphys_addr(phys_addr_t addr, phys_addr_t size) +{ + return addr; +}; +EXPORT_SYMBOL(fixup_bigphys_addr); diff --git a/arch/powerpc/platforms/85xx/mpc85xx.h b/arch/powerpc/platforms/85xx/mpc85xx.h new file mode 100644 index 00000000000..be75abb2a28 --- /dev/null +++ b/arch/powerpc/platforms/85xx/mpc85xx.h @@ -0,0 +1,17 @@ +/* + * arch/ppc/platforms/85xx/mpc85xx.h + * + * MPC85xx soc definitions/function decls + * + * Maintainer: Kumar Gala + * + * Copyright 2005 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +extern void mpc85xx_restart(char *); diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c new file mode 100644 index 00000000000..41191e9aa52 --- /dev/null +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -0,0 +1,208 @@ +/* + * MPC85xx setup and early boot code plus other random bits. + * + * Maintained by Kumar Gala (see MAINTAINERS for contact information) + * + * Copyright 2005 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include /* for linux/serial_core.h */ +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include "mpc85xx.h" + +#ifndef CONFIG_PCI +unsigned long isa_io_base = 0; +unsigned long isa_mem_base = 0; +#endif + + +/* + * Internal interrupts are all Level Sensitive, and Positive Polarity + * + * Note: Likely, this table and the following function should be + * obtained and derived from the OF Device Tree. + */ +static u_char mpc85xx_ads_openpic_initsenses[] __initdata = { + MPC85XX_INTERNAL_IRQ_SENSES, + 0x0, /* External 0: */ +#if defined(CONFIG_PCI) + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 1: PCI slot 0 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 2: PCI slot 1 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 3: PCI slot 2 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 4: PCI slot 3 */ +#else + 0x0, /* External 1: */ + 0x0, /* External 2: */ + 0x0, /* External 3: */ + 0x0, /* External 4: */ +#endif + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */ + 0x0, /* External 6: */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 7: PHY */ + 0x0, /* External 8: */ + 0x0, /* External 9: */ + 0x0, /* External 10: */ + 0x0, /* External 11: */ +}; + + +void __init mpc85xx_ads_pic_init(void) +{ + struct mpic *mpic1; + phys_addr_t OpenPIC_PAddr; + + /* Determine the Physical Address of the OpenPIC regs */ + OpenPIC_PAddr = get_immrbase() + MPC85xx_OPENPIC_OFFSET; + + mpic1 = mpic_alloc(OpenPIC_PAddr, + MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + 4, MPC85xx_OPENPIC_IRQ_OFFSET, 0, 250, + mpc85xx_ads_openpic_initsenses, + sizeof(mpc85xx_ads_openpic_initsenses), " OpenPIC "); + BUG_ON(mpic1 == NULL); + mpic_assign_isu(mpic1, 0, OpenPIC_PAddr + 0x10200); + mpic_assign_isu(mpic1, 1, OpenPIC_PAddr + 0x10280); + mpic_assign_isu(mpic1, 2, OpenPIC_PAddr + 0x10300); + mpic_assign_isu(mpic1, 3, OpenPIC_PAddr + 0x10380); + mpic_assign_isu(mpic1, 4, OpenPIC_PAddr + 0x10400); + mpic_assign_isu(mpic1, 5, OpenPIC_PAddr + 0x10480); + mpic_assign_isu(mpic1, 6, OpenPIC_PAddr + 0x10500); + mpic_assign_isu(mpic1, 7, OpenPIC_PAddr + 0x10580); + + /* dummy mappings to get to 48 */ + mpic_assign_isu(mpic1, 8, OpenPIC_PAddr + 0x10600); + mpic_assign_isu(mpic1, 9, OpenPIC_PAddr + 0x10680); + mpic_assign_isu(mpic1, 10, OpenPIC_PAddr + 0x10700); + mpic_assign_isu(mpic1, 11, OpenPIC_PAddr + 0x10780); + + /* External ints */ + mpic_assign_isu(mpic1, 12, OpenPIC_PAddr + 0x10000); + mpic_assign_isu(mpic1, 13, OpenPIC_PAddr + 0x10080); + mpic_assign_isu(mpic1, 14, OpenPIC_PAddr + 0x10100); + mpic_init(mpic1); +} + + +/* + * Setup the architecture + */ +static void __init +mpc85xx_ads_setup_arch(void) +{ + struct device_node *cpu; + + if (ppc_md.progress) + ppc_md.progress("mpc85xx_ads_setup_arch()", 0); + + cpu = of_find_node_by_type(NULL, "cpu"); + if (cpu != 0) { + unsigned int *fp; + + fp = (int *)get_property(cpu, "clock-frequency", NULL); + if (fp != 0) + loops_per_jiffy = *fp / HZ; + else + loops_per_jiffy = 50000000 / HZ; + of_node_put(cpu); + } + +#ifdef CONFIG_ROOT_NFS + ROOT_DEV = Root_NFS; +#else + ROOT_DEV = Root_HDA1; +#endif +} + + +void +mpc85xx_ads_show_cpuinfo(struct seq_file *m) +{ + uint pvid, svid, phid1; + uint memsize = total_memory; + + pvid = mfspr(SPRN_PVR); + svid = mfspr(SPRN_SVR); + + seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n"); + seq_printf(m, "Machine\t\t: mpc85xx\n"); + seq_printf(m, "PVR\t\t: 0x%x\n", pvid); + seq_printf(m, "SVR\t\t: 0x%x\n", svid); + + /* Display cpu Pll setting */ + phid1 = mfspr(SPRN_HID1); + seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); + + /* Display the amount of memory */ + seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); +} + + +void __init +platform_init(void) +{ + ppc_md.setup_arch = mpc85xx_ads_setup_arch; + ppc_md.show_cpuinfo = mpc85xx_ads_show_cpuinfo; + + ppc_md.init_IRQ = mpc85xx_ads_pic_init; + ppc_md.get_irq = mpic_get_irq; + + ppc_md.restart = mpc85xx_restart; + ppc_md.power_off = NULL; + ppc_md.halt = NULL; + + ppc_md.time_init = NULL; + ppc_md.set_rtc_time = NULL; + ppc_md.get_rtc_time = NULL; + ppc_md.calibrate_decr = generic_calibrate_decr; + + ppc_md.progress = udbg_progress; + + if (ppc_md.progress) + ppc_md.progress("mpc85xx_ads platform_init(): exit", 0); +} + + diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile index 04073fd987e..c4f6b0d2d14 100644 --- a/arch/powerpc/platforms/Makefile +++ b/arch/powerpc/platforms/Makefile @@ -8,7 +8,7 @@ endif obj-$(CONFIG_PPC_CHRP) += chrp/ obj-$(CONFIG_4xx) += 4xx/ obj-$(CONFIG_PPC_83xx) += 83xx/ -obj-$(CONFIG_85xx) += 85xx/ +obj-$(CONFIG_PPC_85xx) += 85xx/ obj-$(CONFIG_PPC_PSERIES) += pseries/ obj-$(CONFIG_PPC_ISERIES) += iseries/ obj-$(CONFIG_PPC_MAPLE) += maple/ -- cgit v1.2.3-18-g5258 From 0ce928e1b2ad4309fae6c4324b9e9e433fbf62a2 Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Sun, 15 Jan 2006 17:30:29 +0300 Subject: [PATCH] ppc32 8xx: Added setbitsXX/clrbitsXX macro for read-modify-write operations This adds setbitsXX/clrbitsXX macro for read-modify-write operations and converts the 8xx core and drivers to use them. Signed-off-by: Vitaly Bordug Signed-off-by: Marcelo Tosatti Signed-off-by: Paul Mackerras --- arch/ppc/8xx_io/commproc.c | 6 +++--- arch/ppc/syslib/m8xx_setup.c | 13 +++++++------ arch/ppc/syslib/m8xx_wdt.c | 3 +-- 3 files changed, 11 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/ppc/8xx_io/commproc.c b/arch/ppc/8xx_io/commproc.c index 579cd40258b..12b84ca5132 100644 --- a/arch/ppc/8xx_io/commproc.c +++ b/arch/ppc/8xx_io/commproc.c @@ -73,7 +73,7 @@ cpm_mask_irq(unsigned int irq) { int cpm_vec = irq - CPM_IRQ_OFFSET; - out_be32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr, in_be32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr) & ~(1 << cpm_vec)); + clrbits32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr, (1 << cpm_vec)); } static void @@ -81,7 +81,7 @@ cpm_unmask_irq(unsigned int irq) { int cpm_vec = irq - CPM_IRQ_OFFSET; - out_be32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr, in_be32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr) | (1 << cpm_vec)); + setbits32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr, (1 << cpm_vec)); } static void @@ -198,7 +198,7 @@ cpm_interrupt_init(void) if (setup_irq(CPM_IRQ_OFFSET + CPMVEC_ERROR, &cpm_error_irqaction)) panic("Could not allocate CPM error IRQ!"); - out_be32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cicr, in_be32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cicr) | CICR_IEN); + setbits32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cicr, CICR_IEN); } /* diff --git a/arch/ppc/syslib/m8xx_setup.c b/arch/ppc/syslib/m8xx_setup.c index 688616de3cd..ff0282479a7 100644 --- a/arch/ppc/syslib/m8xx_setup.c +++ b/arch/ppc/syslib/m8xx_setup.c @@ -140,9 +140,11 @@ void __init __attribute__ ((weak)) init_internal_rtc(void) { /* Disable the RTC one second and alarm interrupts. */ - out_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc, in_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc) & ~(RTCSC_SIE | RTCSC_ALE)); + clrbits16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc, (RTCSC_SIE | RTCSC_ALE)); + /* Enable the RTC */ - out_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc, in_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc) | (RTCSC_RTF | RTCSC_RTE)); + setbits16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc, (RTCSC_RTF | RTCSC_RTE)); + } /* The decrementer counts at the system (internal) clock frequency divided by @@ -159,8 +161,7 @@ void __init m8xx_calibrate_decr(void) out_be32(&((immap_t *)IMAP_ADDR)->im_clkrstk.cark_sccrk, KAPWR_KEY); /* Force all 8xx processors to use divide by 16 processor clock. */ - out_be32(&((immap_t *)IMAP_ADDR)->im_clkrst.car_sccr, - in_be32(&((immap_t *)IMAP_ADDR)->im_clkrst.car_sccr)|0x02000000); + setbits32(&((immap_t *)IMAP_ADDR)->im_clkrst.car_sccr, 0x02000000); /* Processor frequency is MHz. * The value 'fp' is the number of decrementer ticks per second. */ @@ -239,8 +240,8 @@ m8xx_restart(char *cmd) __volatile__ unsigned char dummy; local_irq_disable(); - out_be32(&((immap_t *)IMAP_ADDR)->im_clkrst.car_plprcr, in_be32(&((immap_t *)IMAP_ADDR)->im_clkrst.car_plprcr) | 0x00000080); + setbits32(&((immap_t *)IMAP_ADDR)->im_clkrst.car_plprcr, 0x00000080); /* Clear the ME bit in MSR to cause checkstop on machine check */ mtmsr(mfmsr() & ~0x1000); @@ -310,8 +311,8 @@ m8xx_init_IRQ(void) i8259_init(0); /* The i8259 cascade interrupt must be level sensitive. */ - out_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_siel, in_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_siel & ~(0x80000000 >> ISA_BRIDGE_INT))); + clrbits32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_siel, (0x80000000 >> ISA_BRIDGE_INT)); if (setup_irq(ISA_BRIDGE_INT, &mbx_i8259_irqaction)) enable_irq(ISA_BRIDGE_INT); #endif /* CONFIG_PCI */ diff --git a/arch/ppc/syslib/m8xx_wdt.c b/arch/ppc/syslib/m8xx_wdt.c index df6c9557b86..ac11d7bab44 100644 --- a/arch/ppc/syslib/m8xx_wdt.c +++ b/arch/ppc/syslib/m8xx_wdt.c @@ -41,8 +41,7 @@ static irqreturn_t m8xx_wdt_interrupt(int irq, void *dev, struct pt_regs *regs) m8xx_wdt_reset(); - out_be16(&imap->im_sit.sit_piscr, in_be16(&imap->im_sit.sit_piscr) | PISCR_PS); /* clear irq */ - + setbits16(&imap->im_sit.sit_piscr, PISCR_PS); return IRQ_HANDLED; } -- cgit v1.2.3-18-g5258 From f4fc4a5b74cff2a487222f05704a2bd01953d250 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Mon, 16 Jan 2006 10:53:22 -0600 Subject: [PATCH] powerpc: Add CONFIG_DEFAULT_UIMAGE to build a uImage by default for a board Embedded boards that u-boot require a kernel image in the uImage format. This allows a given board to specify it wants a uImage built by default. Signed-off-by: Kumar Gala Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 6 ++++++ arch/powerpc/Makefile | 1 + 2 files changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 8aa39d073df..fb0dcb994b8 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -83,6 +83,12 @@ config GENERIC_TBSYNC default y if PPC32 && SMP default n +config DEFAULT_UIMAGE + bool + help + Used to allow a board to specify it wants a uImage built by default + default n + menu "Processor support" choice prompt "Processor Type" diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 44dd82b791d..15fc3e98ac5 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -142,6 +142,7 @@ drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/ # Default to zImage, override when needed defaultimage-y := zImage defaultimage-$(CONFIG_PPC_ISERIES) := vmlinux +defaultimage-$(CONFIG_DEFAULT_UIMAGE) := uImage KBUILD_IMAGE := $(defaultimage-y) all: $(KBUILD_IMAGE) -- cgit v1.2.3-18-g5258 From 0ec57e53c945fe962b190953f61e1ffd127e68d3 Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Tue, 17 Jan 2006 00:24:42 -0200 Subject: [PATCH] powerpc: generalize PPC44x_PIN_SIZE The following patch generalizes PPC44x_PIN_SIZE by changing it to PPC_PIN_SIZE, which can be defined by any sub-arch to automatically adjust VMALLOC_START. Define PPC_PIN_SIZE on 8xx, avoiding potential conflicts with the pinned space. Signed-off-by: Marcelo Tosatti Signed-off-by: Paul Mackerras --- arch/ppc/mm/44x_mmu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/ppc/mm/44x_mmu.c b/arch/ppc/mm/44x_mmu.c index 3d79ce281b6..e0152a9b26e 100644 --- a/arch/ppc/mm/44x_mmu.c +++ b/arch/ppc/mm/44x_mmu.c @@ -104,7 +104,7 @@ unsigned long __init mmu_mapin_ram(void) /* Determine number of entries necessary to cover lowmem */ pinned_tlbs = (unsigned int) - (_ALIGN(total_lowmem, PPC44x_PIN_SIZE) >> PPC44x_PIN_SHIFT); + (_ALIGN(total_lowmem, PPC_PIN_SIZE) >> PPC44x_PIN_SHIFT); /* Write upper watermark to save location */ tlb_44x_hwater = PPC44x_LOW_SLOT - pinned_tlbs; @@ -112,7 +112,7 @@ unsigned long __init mmu_mapin_ram(void) /* If necessary, set additional pinned TLBs */ if (pinned_tlbs > 1) for (i = (PPC44x_LOW_SLOT-(pinned_tlbs-1)); i < PPC44x_LOW_SLOT; i++) { - unsigned int phys_addr = (PPC44x_LOW_SLOT-i) * PPC44x_PIN_SIZE; + unsigned int phys_addr = (PPC44x_LOW_SLOT-i) * PPC_PIN_SIZE; ppc44x_pin_tlb(i, phys_addr+PAGE_OFFSET, phys_addr); } -- cgit v1.2.3-18-g5258 From 076d022c566fddde41fd4a858dd24bacad8304d7 Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Tue, 17 Jan 2006 22:22:27 +0300 Subject: [PATCH] PPC32 8xx: support for the physmapped flash on m8xx Implemented more correct way to support physmapped flash on m8xx than map in mtd. The areas intended to contain bootloader are protected readonly. Note that CFI and JEDEC stuff should be configured properly in order this to work, e.g. for 885/86x CFI should support 4-chip flash interleave. Also fixed compilation warning. Signed-off-by: Vitaly Bordug Signed-off-by: Paul Mackerras --- arch/ppc/syslib/m8xx_setup.c | 50 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 50 insertions(+) (limited to 'arch') diff --git a/arch/ppc/syslib/m8xx_setup.c b/arch/ppc/syslib/m8xx_setup.c index ff0282479a7..cdb73a23a53 100644 --- a/arch/ppc/syslib/m8xx_setup.c +++ b/arch/ppc/syslib/m8xx_setup.c @@ -34,6 +34,13 @@ #include #include +#if defined(CONFIG_MTD) && defined(CONFIG_MTD_PHYSMAP) +#include +#include +#include +#include +#endif + #include #include #include @@ -49,6 +56,34 @@ #include "ppc8xx_pic.h" +#ifdef CONFIG_MTD_PHYSMAP +#define MPC8xxADS_BANK_WIDTH 4 +#endif + +#define MPC8xxADS_U_BOOT_SIZE 0x80000 +#define MPC8xxADS_FREE_AREA_OFFSET MPC8xxADS_U_BOOT_SIZE + +#if defined(CONFIG_MTD_PARTITIONS) + /* + NOTE: bank width and interleave relative to the installed flash + should have been chosen within MTD_CFI_GEOMETRY options. + */ +static struct mtd_partition mpc8xxads_partitions[] = { + { + .name = "bootloader", + .size = MPC8xxADS_U_BOOT_SIZE, + .offset = 0, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, { + .name = "User FS", + .offset = MPC8xxADS_FREE_AREA_OFFSET + } +}; + +#define mpc8xxads_part_num (sizeof (mpc8xxads_partitions) / sizeof (mpc8xxads_partitions[0])) + +#endif + static int m8xx_set_rtc_time(unsigned long time); static unsigned long m8xx_get_rtc_time(void); void m8xx_calibrate_decr(void); @@ -71,6 +106,10 @@ board_init(void) void __init m8xx_setup_arch(void) { +#if defined(CONFIG_MTD) && defined(CONFIG_MTD_PHYSMAP) + bd_t *binfo = (bd_t *)__res; +#endif + /* Reset the Communication Processor Module. */ m8xx_cpm_reset(); @@ -106,6 +145,17 @@ m8xx_setup_arch(void) } #endif #endif + +#if defined (CONFIG_MPC86XADS) || defined (CONFIG_MPC885ADS) +#if defined(CONFIG_MTD_PHYSMAP) + physmap_configure(binfo->bi_flashstart, binfo->bi_flashsize, + MPC8xxADS_BANK_WIDTH, NULL); +#ifdef CONFIG_MTD_PARTITIONS + physmap_set_partitions(mpc8xxads_partitions, mpc8xxads_part_num); +#endif /* CONFIG_MTD_PARTITIONS */ +#endif /* CONFIG_MTD_PHYSMAP */ +#endif + board_init(); } -- cgit v1.2.3-18-g5258 From b0a06623dc4caf6dfb6a84419507643471676d20 Mon Sep 17 00:00:00 2001 From: Keith Owens Date: Sun, 22 Jan 2006 10:55:25 +1100 Subject: [IA64] Delete MCA/INIT sigdelayed code The only user of the MCA/INIT sigdelayed code (SGI's I/O probing) has moved from the kernel into SAL. Delete the MCA/INIT sigdelayed code. Signed-off-by: Keith Owens Signed-off-by: Tony Luck --- arch/ia64/kernel/entry.S | 14 ------- arch/ia64/kernel/signal.c | 101 ---------------------------------------------- 2 files changed, 115 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S index 7a6ffd61378..9dda7a36d1e 100644 --- a/arch/ia64/kernel/entry.S +++ b/arch/ia64/kernel/entry.S @@ -1100,9 +1100,6 @@ skip_rbs_switch: st8 [r2]=r8 st8 [r3]=r10 .work_pending: - tbit.nz p6,p0=r31,TIF_SIGDELAYED // signal delayed from MCA/INIT/NMI/PMI context? -(p6) br.cond.sptk.few .sigdelayed - ;; tbit.z p6,p0=r31,TIF_NEED_RESCHED // current_thread_info()->need_resched==0? (p6) br.cond.sptk.few .notify #ifdef CONFIG_PREEMPT @@ -1129,17 +1126,6 @@ skip_rbs_switch: (pLvSys)br.cond.sptk.few .work_pending_syscall_end br.cond.sptk.many .work_processed_kernel // don't re-check -// There is a delayed signal that was detected in MCA/INIT/NMI/PMI context where -// it could not be delivered. Deliver it now. The signal might be for us and -// may set TIF_SIGPENDING, so redrive ia64_leave_* after processing the delayed -// signal. - -.sigdelayed: - br.call.sptk.many rp=do_sigdelayed - cmp.eq p6,p0=r0,r0 // p6 <- 1, always re-check -(pLvSys)br.cond.sptk.few .work_pending_syscall_end - br.cond.sptk.many .work_processed_kernel // re-check - .work_pending_syscall_end: adds r2=PT(R8)+16,r12 adds r3=PT(R10)+16,r12 diff --git a/arch/ia64/kernel/signal.c b/arch/ia64/kernel/signal.c index 463f6bb44d0..1d7903ee212 100644 --- a/arch/ia64/kernel/signal.c +++ b/arch/ia64/kernel/signal.c @@ -588,104 +588,3 @@ ia64_do_signal (sigset_t *oldset, struct sigscratch *scr, long in_syscall) } return 0; } - -/* Set a delayed signal that was detected in MCA/INIT/NMI/PMI context where it - * could not be delivered. It is important that the target process is not - * allowed to do any more work in user space. Possible cases for the target - * process: - * - * - It is sleeping and will wake up soon. Store the data in the current task, - * the signal will be sent when the current task returns from the next - * interrupt. - * - * - It is running in user context. Store the data in the current task, the - * signal will be sent when the current task returns from the next interrupt. - * - * - It is running in kernel context on this or another cpu and will return to - * user context. Store the data in the target task, the signal will be sent - * to itself when the target task returns to user space. - * - * - It is running in kernel context on this cpu and will sleep before - * returning to user context. Because this is also the current task, the - * signal will not get delivered and the task could sleep indefinitely. - * Store the data in the idle task for this cpu, the signal will be sent - * after the idle task processes its next interrupt. - * - * To cover all cases, store the data in the target task, the current task and - * the idle task on this cpu. Whatever happens, the signal will be delivered - * to the target task before it can do any useful user space work. Multiple - * deliveries have no unwanted side effects. - * - * Note: This code is executed in MCA/INIT/NMI/PMI context, with interrupts - * disabled. It must not take any locks nor use kernel structures or services - * that require locks. - */ - -/* To ensure that we get the right pid, check its start time. To avoid extra - * include files in thread_info.h, convert the task start_time to unsigned long, - * giving us a cycle time of > 580 years. - */ -static inline unsigned long -start_time_ul(const struct task_struct *t) -{ - return t->start_time.tv_sec * NSEC_PER_SEC + t->start_time.tv_nsec; -} - -void -set_sigdelayed(pid_t pid, int signo, int code, void __user *addr) -{ - struct task_struct *t; - unsigned long start_time = 0; - int i; - - for (i = 1; i <= 3; ++i) { - switch (i) { - case 1: - t = find_task_by_pid(pid); - if (t) - start_time = start_time_ul(t); - break; - case 2: - t = current; - break; - default: - t = idle_task(smp_processor_id()); - break; - } - - if (!t) - return; - task_thread_info(t)->sigdelayed.signo = signo; - task_thread_info(t)->sigdelayed.code = code; - task_thread_info(t)->sigdelayed.addr = addr; - task_thread_info(t)->sigdelayed.start_time = start_time; - task_thread_info(t)->sigdelayed.pid = pid; - wmb(); - set_tsk_thread_flag(t, TIF_SIGDELAYED); - } -} - -/* Called from entry.S when it detects TIF_SIGDELAYED, a delayed signal that - * was detected in MCA/INIT/NMI/PMI context where it could not be delivered. - */ - -void -do_sigdelayed(void) -{ - struct siginfo siginfo; - pid_t pid; - struct task_struct *t; - - clear_thread_flag(TIF_SIGDELAYED); - memset(&siginfo, 0, sizeof(siginfo)); - siginfo.si_signo = current_thread_info()->sigdelayed.signo; - siginfo.si_code = current_thread_info()->sigdelayed.code; - siginfo.si_addr = current_thread_info()->sigdelayed.addr; - pid = current_thread_info()->sigdelayed.pid; - t = find_task_by_pid(pid); - if (!t) - return; - if (current_thread_info()->sigdelayed.start_time != start_time_ul(t)) - return; - force_sig_info(siginfo.si_signo, &siginfo, t); -} -- cgit v1.2.3-18-g5258 From 13938ca7a1ad9a4788cf73309f187d99c97ddfde Mon Sep 17 00:00:00 2001 From: Mark Maule Date: Thu, 26 Jan 2006 14:46:39 -0600 Subject: [IA64-SGI] driver bugfixes and hardware workarounds for CE1.0 asic Various bugfixes and hardware bug workarounds necessary for the rev 1.0 version of the altix TIO CE asic. Signed-off-by: Mark Maule Signed-off-by: Tony Luck --- arch/ia64/sn/pci/tioce_provider.c | 326 +++++++++++++++++++++++++++++++++++--- 1 file changed, 303 insertions(+), 23 deletions(-) (limited to 'arch') diff --git a/arch/ia64/sn/pci/tioce_provider.c b/arch/ia64/sn/pci/tioce_provider.c index e52831ed93e..fa073cc4b56 100644 --- a/arch/ia64/sn/pci/tioce_provider.c +++ b/arch/ia64/sn/pci/tioce_provider.c @@ -15,6 +15,124 @@ #include #include #include +#include + +/* + * 1/26/2006 + * + * WAR for SGI PV 944642. For revA TIOCE, need to use the following recipe + * (taken from the above PV) before and after accessing tioce internal MMR's + * to avoid tioce lockups. + * + * The recipe as taken from the PV: + * + * if(mmr address < 0x45000) { + * if(mmr address == 0 or 0x80) + * mmr wrt or read address 0xc0 + * else if(mmr address == 0x148 or 0x200) + * mmr wrt or read address 0x28 + * else + * mmr wrt or read address 0x158 + * + * do desired mmr access (rd or wrt) + * + * if(mmr address == 0x100) + * mmr wrt or read address 0x38 + * mmr wrt or read address 0xb050 + * } else + * do desired mmr access + * + * According to hw, we can use reads instead of writes to the above addres + * + * Note this WAR can only to be used for accessing internal MMR's in the + * TIOCE Coretalk Address Range 0x0 - 0x07ff_ffff. This includes the + * "Local CE Registers and Memories" and "PCI Compatible Config Space" address + * spaces from table 2-1 of the "CE Programmer's Reference Overview" document. + * + * All registers defined in struct tioce will meet that criteria. + */ + +static void inline +tioce_mmr_war_pre(struct tioce_kernel *kern, void *mmr_addr) +{ + u64 mmr_base; + u64 mmr_offset; + + if (kern->ce_common->ce_rev != TIOCE_REV_A) + return; + + mmr_base = kern->ce_common->ce_pcibus.bs_base; + mmr_offset = (u64)mmr_addr - mmr_base; + + if (mmr_offset < 0x45000) { + u64 mmr_war_offset; + + if (mmr_offset == 0 || mmr_offset == 0x80) + mmr_war_offset = 0xc0; + else if (mmr_offset == 0x148 || mmr_offset == 0x200) + mmr_war_offset = 0x28; + else + mmr_war_offset = 0x158; + + readq_relaxed((void *)(mmr_base + mmr_war_offset)); + } +} + +static void inline +tioce_mmr_war_post(struct tioce_kernel *kern, void *mmr_addr) +{ + u64 mmr_base; + u64 mmr_offset; + + if (kern->ce_common->ce_rev != TIOCE_REV_A) + return; + + mmr_base = kern->ce_common->ce_pcibus.bs_base; + mmr_offset = (u64)mmr_addr - mmr_base; + + if (mmr_offset < 0x45000) { + if (mmr_offset == 0x100) + readq_relaxed((void *)(mmr_base + 0x38)); + readq_relaxed((void *)(mmr_base + 0xb050)); + } +} + +/* load mmr contents into a variable */ +#define tioce_mmr_load(kern, mmrp, varp) do {\ + tioce_mmr_war_pre(kern, mmrp); \ + *(varp) = readq_relaxed(mmrp); \ + tioce_mmr_war_post(kern, mmrp); \ +} while (0) + +/* store variable contents into mmr */ +#define tioce_mmr_store(kern, mmrp, varp) do {\ + tioce_mmr_war_pre(kern, mmrp); \ + writeq(*varp, mmrp); \ + tioce_mmr_war_post(kern, mmrp); \ +} while (0) + +/* store immediate value into mmr */ +#define tioce_mmr_storei(kern, mmrp, val) do {\ + tioce_mmr_war_pre(kern, mmrp); \ + writeq(val, mmrp); \ + tioce_mmr_war_post(kern, mmrp); \ +} while (0) + +/* set bits (immediate value) into mmr */ +#define tioce_mmr_seti(kern, mmrp, bits) do {\ + u64 tmp; \ + tioce_mmr_load(kern, mmrp, &tmp); \ + tmp |= (bits); \ + tioce_mmr_store(kern, mmrp, &tmp); \ +} while (0) + +/* clear bits (immediate value) into mmr */ +#define tioce_mmr_clri(kern, mmrp, bits) do { \ + u64 tmp; \ + tioce_mmr_load(kern, mmrp, &tmp); \ + tmp &= ~(bits); \ + tioce_mmr_store(kern, mmrp, &tmp); \ +} while (0) /** * Bus address ranges for the 5 flavors of TIOCE DMA @@ -62,9 +180,9 @@ #define TIOCE_ATE_M40 2 #define TIOCE_ATE_M40S 3 -#define KB(x) ((x) << 10) -#define MB(x) ((x) << 20) -#define GB(x) ((x) << 30) +#define KB(x) ((u64)(x) << 10) +#define MB(x) ((u64)(x) << 20) +#define GB(x) ((u64)(x) << 30) /** * tioce_dma_d64 - create a DMA mapping using 64-bit direct mode @@ -151,7 +269,7 @@ tioce_alloc_map(struct tioce_kernel *ce_kern, int type, int port, int last; int entries; int nates; - int pagesize; + u64 pagesize; u64 *ate_shadow; u64 *ate_reg; u64 addr; @@ -228,7 +346,7 @@ tioce_alloc_map(struct tioce_kernel *ce_kern, int type, int port, ate = ATE_MAKE(addr, pagesize); ate_shadow[i + j] = ate; - writeq(ate, &ate_reg[i + j]); + tioce_mmr_storei(ce_kern, &ate_reg[i + j], ate); addr += pagesize; } @@ -272,7 +390,8 @@ tioce_dma_d32(struct pci_dev *pdev, u64 ct_addr) u64 tmp; ce_kern->ce_port[port].dirmap_shadow = ct_upper; - writeq(ct_upper, &ce_mmr->ce_ure_dir_map[port]); + tioce_mmr_storei(ce_kern, &ce_mmr->ce_ure_dir_map[port], + ct_upper); tmp = ce_mmr->ce_ure_dir_map[port]; dma_ok = 1; } else @@ -344,7 +463,8 @@ tioce_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir) if (TIOCE_D32_ADDR(bus_addr)) { if (--ce_kern->ce_port[port].dirmap_refcnt == 0) { ce_kern->ce_port[port].dirmap_shadow = 0; - writeq(0, &ce_mmr->ce_ure_dir_map[port]); + tioce_mmr_storei(ce_kern, &ce_mmr->ce_ure_dir_map[port], + 0); } } else { struct tioce_dmamap *map; @@ -365,7 +485,7 @@ tioce_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir) } else if (--map->refcnt == 0) { for (i = 0; i < map->ate_count; i++) { map->ate_shadow[i] = 0; - map->ate_hw[i] = 0; + tioce_mmr_storei(ce_kern, &map->ate_hw[i], 0); } list_del(&map->ce_dmamap_list); @@ -486,7 +606,7 @@ tioce_do_dma_map(struct pci_dev *pdev, u64 paddr, size_t byte_count, spin_unlock_irqrestore(&ce_kern->ce_lock, flags); dma_map_done: - if (mapaddr & barrier) + if (mapaddr && barrier) mapaddr = tioce_dma_barrier(mapaddr, 1); return mapaddr; @@ -541,17 +661,61 @@ tioce_error_intr_handler(int irq, void *arg, struct pt_regs *pt) soft->ce_pcibus.bs_persist_segment, soft->ce_pcibus.bs_persist_busnum, 0, 0, 0, 0, 0); + if (ret_stuff.v0) + panic("tioce_error_intr_handler: Fatal TIOCE error"); + return IRQ_HANDLED; } +/** + * tioce_reserve_m32 - reserve M32 ate's for the indicated address range + * @tioce_kernel: TIOCE context to reserve ate's for + * @base: starting bus address to reserve + * @limit: last bus address to reserve + * + * If base/limit falls within the range of bus space mapped through the + * M32 space, reserve the resources corresponding to the range. + */ +static void +tioce_reserve_m32(struct tioce_kernel *ce_kern, u64 base, u64 limit) +{ + int ate_index, last_ate, ps; + struct tioce *ce_mmr; + + if (!TIOCE_M32_ADDR(base)) + return; + + ce_mmr = (struct tioce *)ce_kern->ce_common->ce_pcibus.bs_base; + ps = ce_kern->ce_ate3240_pagesize; + ate_index = ATE_PAGE(base, ps); + last_ate = ate_index + ATE_NPAGES(base, limit-base+1, ps) - 1; + + if (ate_index < 64) + ate_index = 64; + + while (ate_index <= last_ate) { + u64 ate; + + ate = ATE_MAKE(0xdeadbeef, ps); + ce_kern->ce_ate3240_shadow[ate_index] = ate; + tioce_mmr_storei(ce_kern, &ce_mmr->ce_ure_ate3240[ate_index], + ate); + ate_index++; + } +} + /** * tioce_kern_init - init kernel structures related to a given TIOCE * @tioce_common: ptr to a cached tioce_common struct that originated in prom - */ static struct tioce_kernel * + */ +static struct tioce_kernel * tioce_kern_init(struct tioce_common *tioce_common) { int i; + int ps; + int dev; u32 tmp; + unsigned int seg, bus; struct tioce *tioce_mmr; struct tioce_kernel *tioce_kern; @@ -572,9 +736,10 @@ tioce_kern_init(struct tioce_common *tioce_common) * here to use pci_read_config_xxx() so use the raw_pci_ops vector. */ - raw_pci_ops->read(tioce_common->ce_pcibus.bs_persist_segment, - tioce_common->ce_pcibus.bs_persist_busnum, - PCI_DEVFN(2, 0), PCI_SECONDARY_BUS, 1, &tmp); + seg = tioce_common->ce_pcibus.bs_persist_segment; + bus = tioce_common->ce_pcibus.bs_persist_busnum; + + raw_pci_ops->read(seg, bus, PCI_DEVFN(2, 0), PCI_SECONDARY_BUS, 1,&tmp); tioce_kern->ce_port1_secondary = (u8) tmp; /* @@ -583,18 +748,76 @@ tioce_kern_init(struct tioce_common *tioce_common) */ tioce_mmr = (struct tioce *)tioce_common->ce_pcibus.bs_base; - __sn_clrq_relaxed(&tioce_mmr->ce_ure_page_map, CE_URE_PAGESIZE_MASK); - __sn_setq_relaxed(&tioce_mmr->ce_ure_page_map, CE_URE_256K_PAGESIZE); - tioce_kern->ce_ate3240_pagesize = KB(256); + tioce_mmr_clri(tioce_kern, &tioce_mmr->ce_ure_page_map, + CE_URE_PAGESIZE_MASK); + tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_ure_page_map, + CE_URE_256K_PAGESIZE); + ps = tioce_kern->ce_ate3240_pagesize = KB(256); for (i = 0; i < TIOCE_NUM_M40_ATES; i++) { tioce_kern->ce_ate40_shadow[i] = 0; - writeq(0, &tioce_mmr->ce_ure_ate40[i]); + tioce_mmr_storei(tioce_kern, &tioce_mmr->ce_ure_ate40[i], 0); } for (i = 0; i < TIOCE_NUM_M3240_ATES; i++) { tioce_kern->ce_ate3240_shadow[i] = 0; - writeq(0, &tioce_mmr->ce_ure_ate3240[i]); + tioce_mmr_storei(tioce_kern, &tioce_mmr->ce_ure_ate3240[i], 0); + } + + /* + * Reserve ATE's corresponding to reserved address ranges. These + * include: + * + * Memory space covered by each PPB mem base/limit register + * Memory space covered by each PPB prefetch base/limit register + * + * These bus ranges are for pio (downstream) traffic only, and so + * cannot be used for DMA. + */ + + for (dev = 1; dev <= 2; dev++) { + u64 base, limit; + + /* mem base/limit */ + + raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0), + PCI_MEMORY_BASE, 2, &tmp); + base = (u64)tmp << 16; + + raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0), + PCI_MEMORY_LIMIT, 2, &tmp); + limit = (u64)tmp << 16; + limit |= 0xfffffUL; + + if (base < limit) + tioce_reserve_m32(tioce_kern, base, limit); + + /* + * prefetch mem base/limit. The tioce ppb's have 64-bit + * decoders, so read the upper portions w/o checking the + * attributes. + */ + + raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0), + PCI_PREF_MEMORY_BASE, 2, &tmp); + base = ((u64)tmp & PCI_PREF_RANGE_MASK) << 16; + + raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0), + PCI_PREF_BASE_UPPER32, 4, &tmp); + base |= (u64)tmp << 32; + + raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0), + PCI_PREF_MEMORY_LIMIT, 2, &tmp); + + limit = ((u64)tmp & PCI_PREF_RANGE_MASK) << 16; + limit |= 0xfffffUL; + + raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0), + PCI_PREF_LIMIT_UPPER32, 4, &tmp); + limit |= (u64)tmp << 32; + + if ((base < limit) && TIOCE_M32_ADDR(base)) + tioce_reserve_m32(tioce_kern, base, limit); } return tioce_kern; @@ -614,6 +837,7 @@ tioce_force_interrupt(struct sn_irq_info *sn_irq_info) { struct pcidev_info *pcidev_info; struct tioce_common *ce_common; + struct tioce_kernel *ce_kern; struct tioce *ce_mmr; u64 force_int_val; @@ -629,6 +853,29 @@ tioce_force_interrupt(struct sn_irq_info *sn_irq_info) ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info; ce_mmr = (struct tioce *)ce_common->ce_pcibus.bs_base; + ce_kern = (struct tioce_kernel *)ce_common->ce_kernel_private; + + /* + * TIOCE Rev A workaround (PV 945826), force an interrupt by writing + * the TIO_INTx register directly (1/26/2006) + */ + if (ce_common->ce_rev == TIOCE_REV_A) { + u64 int_bit_mask = (1ULL << sn_irq_info->irq_int_bit); + u64 status; + + tioce_mmr_load(ce_kern, &ce_mmr->ce_adm_int_status, &status); + if (status & int_bit_mask) { + u64 force_irq = (1 << 8) | sn_irq_info->irq_irq; + u64 ctalk = sn_irq_info->irq_xtalkaddr; + u64 nasid, offset; + + nasid = (ctalk & CTALK_NASID_MASK) >> CTALK_NASID_SHFT; + offset = (ctalk & CTALK_NODE_OFFSET); + HUB_S(TIO_IOSPACE_ADDR(nasid, offset), force_irq); + } + + return; + } /* * irq_int_bit is originally set up by prom, and holds the interrupt @@ -666,7 +913,7 @@ tioce_force_interrupt(struct sn_irq_info *sn_irq_info) default: return; } - writeq(force_int_val, &ce_mmr->ce_adm_force_int); + tioce_mmr_storei(ce_kern, &ce_mmr->ce_adm_force_int, force_int_val); } /** @@ -685,6 +932,7 @@ tioce_target_interrupt(struct sn_irq_info *sn_irq_info) { struct pcidev_info *pcidev_info; struct tioce_common *ce_common; + struct tioce_kernel *ce_kern; struct tioce *ce_mmr; int bit; u64 vector; @@ -695,14 +943,15 @@ tioce_target_interrupt(struct sn_irq_info *sn_irq_info) ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info; ce_mmr = (struct tioce *)ce_common->ce_pcibus.bs_base; + ce_kern = (struct tioce_kernel *)ce_common->ce_kernel_private; bit = sn_irq_info->irq_int_bit; - __sn_setq_relaxed(&ce_mmr->ce_adm_int_mask, (1UL << bit)); + tioce_mmr_seti(ce_kern, &ce_mmr->ce_adm_int_mask, (1UL << bit)); vector = (u64)sn_irq_info->irq_irq << INTR_VECTOR_SHFT; vector |= sn_irq_info->irq_xtalkaddr; - writeq(vector, &ce_mmr->ce_adm_int_dest[bit]); - __sn_clrq_relaxed(&ce_mmr->ce_adm_int_mask, (1UL << bit)); + tioce_mmr_storei(ce_kern, &ce_mmr->ce_adm_int_dest[bit], vector); + tioce_mmr_clri(ce_kern, &ce_mmr->ce_adm_int_mask, (1UL << bit)); tioce_force_interrupt(sn_irq_info); } @@ -721,7 +970,11 @@ tioce_target_interrupt(struct sn_irq_info *sn_irq_info) static void * tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *controller) { + int my_nasid; + cnodeid_t my_cnode, mem_cnode; struct tioce_common *tioce_common; + struct tioce_kernel *tioce_kern; + struct tioce *tioce_mmr; /* * Allocate kernel bus soft and copy from prom. @@ -734,11 +987,23 @@ tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont memcpy(tioce_common, prom_bussoft, sizeof(struct tioce_common)); tioce_common->ce_pcibus.bs_base |= __IA64_UNCACHED_OFFSET; - if (tioce_kern_init(tioce_common) == NULL) { + tioce_kern = tioce_kern_init(tioce_common); + if (tioce_kern == NULL) { kfree(tioce_common); return NULL; } + /* + * Clear out any transient errors before registering the error + * interrupt handler. + */ + + tioce_mmr = (struct tioce *)tioce_common->ce_pcibus.bs_base; + tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_adm_int_status_alias, ~0ULL); + tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_adm_error_summary_alias, + ~0ULL); + tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_dre_comp_err_addr, ~0ULL); + if (request_irq(SGI_PCIASIC_ERROR, tioce_error_intr_handler, SA_SHIRQ, "TIOCE error", (void *)tioce_common)) @@ -750,6 +1015,21 @@ tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont tioce_common->ce_pcibus.bs_persist_segment, tioce_common->ce_pcibus.bs_persist_busnum); + /* + * identify closest nasid for memory allocations + */ + + my_nasid = NASID_GET(tioce_common->ce_pcibus.bs_base); + my_cnode = nasid_to_cnodeid(my_nasid); + + if (sn_hwperf_get_nearest_node(my_cnode, &mem_cnode, NULL) < 0) { + printk(KERN_WARNING "tioce_bus_fixup: failed to find " + "closest node with MEM to TIO node %d\n", my_cnode); + mem_cnode = (cnodeid_t)-1; /* use any node */ + } + + controller->node = mem_cnode; + return tioce_common; } -- cgit v1.2.3-18-g5258 From e08e6c521355cd33e647b2f739885bc3050eead6 Mon Sep 17 00:00:00 2001 From: Brent Casavant Date: Thu, 26 Jan 2006 15:55:52 -0800 Subject: [IA64] hooks to wait for mmio writes to drain when migrating processes On SN2, MMIO writes which are issued from separate processors are not guaranteed to arrive in any particular order at the IO hardware. When performing such writes from the kernel this is not a problem, as a kernel thread will not migrate to another CPU during execution, and mmiowb() calls can guarantee write ordering when control of the IO resource is allowed to move between threads. However, when MMIO writes can be performed from user space (e.g. DRM) there are no such guarantees and mechanisms, as the process may context-switch at any time, and may migrate to a different CPU as part of the switch. For such programs/hardware to operate correctly, it is required that the MMIO writes from the old CPU be accepted by the IO hardware before subsequent writes from the new CPU can be issued. The following patch implements this behavior on SN2 by waiting for a Shub register to indicate that these writes have been accepted. This is placed in the context switch-in path, and only performs the wait when the newly scheduled task changes CPUs. Signed-off-by: Prarit Bhargava Signed-off-by: Brent Casavant --- arch/ia64/sn/kernel/setup.c | 6 ++++-- arch/ia64/sn/kernel/sn2/sn2_smp.c | 23 ++++++++++++++++++++++- 2 files changed, 26 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c index e510dce9971..f1c1338b10b 100644 --- a/arch/ia64/sn/kernel/setup.c +++ b/arch/ia64/sn/kernel/setup.c @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 1999,2001-2005 Silicon Graphics, Inc. All rights reserved. + * Copyright (C) 1999,2001-2006 Silicon Graphics, Inc. All rights reserved. */ #include @@ -496,6 +496,7 @@ void __init sn_setup(char **cmdline_p) * for sn. */ pm_power_off = ia64_sn_power_down; + current->thread.flags |= IA64_THREAD_MIGRATION; } /** @@ -654,7 +655,8 @@ void __init sn_cpu_init(void) SH2_PIO_WRITE_STATUS_1, SH2_PIO_WRITE_STATUS_3}; u64 *pio; pio = is_shub1() ? pio1 : pio2; - pda->pio_write_status_addr = (volatile unsigned long *) LOCAL_MMR_ADDR(pio[slice]); + pda->pio_write_status_addr = + (volatile unsigned long *)GLOBAL_MMR_ADDR(nasid, pio[slice]); pda->pio_write_status_val = is_shub1() ? SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK : 0; } diff --git a/arch/ia64/sn/kernel/sn2/sn2_smp.c b/arch/ia64/sn/kernel/sn2/sn2_smp.c index 471bbaa65d1..1b33fd5e4e3 100644 --- a/arch/ia64/sn/kernel/sn2/sn2_smp.c +++ b/arch/ia64/sn/kernel/sn2/sn2_smp.c @@ -5,7 +5,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2000-2005 Silicon Graphics, Inc. All rights reserved. + * Copyright (C) 2000-2006 Silicon Graphics, Inc. All rights reserved. */ #include @@ -169,6 +169,27 @@ static inline unsigned long wait_piowc(void) return ws; } +/** + * sn_migrate - SN-specific task migration actions + * @task: Task being migrated to new CPU + * + * SN2 PIO writes from separate CPUs are not guaranteed to arrive in order. + * Context switching user threads which have memory-mapped MMIO may cause + * PIOs to issue from seperate CPUs, thus the PIO writes must be drained + * from the previous CPU's Shub before execution resumes on the new CPU. + */ +void sn_migrate(struct task_struct *task) +{ + pda_t *last_pda = pdacpu(task_thread_info(task)->last_cpu); + volatile unsigned long *adr = last_pda->pio_write_status_addr; + unsigned long val = last_pda->pio_write_status_val; + + /* Drain PIO writes from old CPU's Shub */ + while (unlikely((*adr & SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK) + != val)) + cpu_relax(); +} + void sn_tlb_migrate_finish(struct mm_struct *mm) { if (mm == current->mm) -- cgit v1.2.3-18-g5258 From 01999873a455fe9104e91820c72849e608239928 Mon Sep 17 00:00:00 2001 From: Dale Farnsworth Date: Fri, 27 Jan 2006 01:18:01 -0700 Subject: [PATCH] mv643xx_eth: Clean up platform_data configuration We shouldn't expose the hardware register contents in platform_data. The only things we allow the user to configure are autoneg, speed, and duplex. Add specific platform_data fields for these values and remove the registers configs. Signed-off-by: Dale Farnsworth Signed-off-by: Jeff Garzik --- arch/ppc/platforms/hdpu.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/ppc/platforms/hdpu.c b/arch/ppc/platforms/hdpu.c index 50039a204c2..f945416960e 100644 --- a/arch/ppc/platforms/hdpu.c +++ b/arch/ppc/platforms/hdpu.c @@ -319,11 +319,10 @@ static void __init hdpu_fixup_eth_pdata(struct platform_device *pd) struct mv643xx_eth_platform_data *eth_pd; eth_pd = pd->dev.platform_data; - eth_pd->port_serial_control = - mv64x60_read(&bh, MV643XX_ETH_PORT_SERIAL_CONTROL_REG(pd->id) & ~1); - eth_pd->force_phy_addr = 1; eth_pd->phy_addr = pd->id; + eth_pd->speed = SPEED_100; + eth_pd->duplex = DUPLEX_FULL; eth_pd->tx_queue_size = 400; eth_pd->rx_queue_size = 800; } -- cgit v1.2.3-18-g5258 From b4367e7451f19a3ae8b453e8b7ac0a1fdd9bca04 Mon Sep 17 00:00:00 2001 From: "Grant C. Likely" Date: Thu, 19 Jan 2006 01:12:32 -0700 Subject: [PATCH] powerpc: Move xparameters.h into xilinx virtex device specific path xparameters should not be needed by anything but virtex platform code. Move it from include/asm-ppc/ to platforms/4xx/xparameters/ This is preparing for work to remove xparameters from the dependancy tree for most c files. xparam changes should not cause a recompile of the world. Instead, drivers should get device info from the platform bus (populated by the boot code) Signed-off-by: Grant C. Likely Signed-off-by: Paul Mackerras --- arch/ppc/platforms/4xx/virtex-ii_pro.h | 2 +- arch/ppc/platforms/4xx/xparameters/xparameters.h | 18 ++++++++++++++++++ arch/ppc/syslib/xilinx_pic.c | 2 +- 3 files changed, 20 insertions(+), 2 deletions(-) create mode 100644 arch/ppc/platforms/4xx/xparameters/xparameters.h (limited to 'arch') diff --git a/arch/ppc/platforms/4xx/virtex-ii_pro.h b/arch/ppc/platforms/4xx/virtex-ii_pro.h index 9014c488733..026130c8e72 100644 --- a/arch/ppc/platforms/4xx/virtex-ii_pro.h +++ b/arch/ppc/platforms/4xx/virtex-ii_pro.h @@ -16,7 +16,7 @@ #define __ASM_VIRTEXIIPRO_H__ #include -#include +#include /* serial defines */ diff --git a/arch/ppc/platforms/4xx/xparameters/xparameters.h b/arch/ppc/platforms/4xx/xparameters/xparameters.h new file mode 100644 index 00000000000..fe4eac62913 --- /dev/null +++ b/arch/ppc/platforms/4xx/xparameters/xparameters.h @@ -0,0 +1,18 @@ +/* + * include/asm-ppc/xparameters.h + * + * This file includes the correct xparameters.h for the CONFIG'ed board + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * 2004 (c) MontaVista Software, Inc. This file is licensed under the terms + * of the GNU General Public License version 2. This program is licensed + * "as is" without any warranty of any kind, whether express or implied. + */ + +#include + +#if defined(CONFIG_XILINX_ML300) +#include +#endif diff --git a/arch/ppc/syslib/xilinx_pic.c b/arch/ppc/syslib/xilinx_pic.c index 47f04c71fe9..848fb512f3f 100644 --- a/arch/ppc/syslib/xilinx_pic.c +++ b/arch/ppc/syslib/xilinx_pic.c @@ -15,7 +15,7 @@ #include #include #include -#include +#include #include #include -- cgit v1.2.3-18-g5258 From 562e7370a4d59d7ee8988fb0e13707d1f01a046a Mon Sep 17 00:00:00 2001 From: "Grant C. Likely" Date: Thu, 19 Jan 2006 01:12:40 -0700 Subject: [PATCH] powerpc: Make Virtex-II Pro support generic for all Virtex devices The PPC405 hard core is used in both the Virtex-II Pro and Virtex 4 FX FPGAs. This patch cleans up the Virtex naming convention to reflect more than just the Virtex-II Pro. Rename files virtex-ii_pro.[ch] to virtex.[ch] Rename config value VIRTEX_II_PRO to XILINX_VIRTEX Signed-off-by: Grant C. Likely Signed-off-by: Paul Mackerras --- arch/ppc/platforms/4xx/Kconfig | 7 ++- arch/ppc/platforms/4xx/Makefile | 2 +- arch/ppc/platforms/4xx/virtex-ii_pro.c | 60 --------------------- arch/ppc/platforms/4xx/virtex-ii_pro.h | 99 ---------------------------------- arch/ppc/platforms/4xx/virtex.c | 60 +++++++++++++++++++++ arch/ppc/platforms/4xx/virtex.h | 99 ++++++++++++++++++++++++++++++++++ arch/ppc/platforms/4xx/xilinx_ml300.c | 2 +- arch/ppc/platforms/4xx/xilinx_ml300.h | 2 +- arch/ppc/syslib/Makefile | 2 +- 9 files changed, 169 insertions(+), 164 deletions(-) delete mode 100644 arch/ppc/platforms/4xx/virtex-ii_pro.c delete mode 100644 arch/ppc/platforms/4xx/virtex-ii_pro.h create mode 100644 arch/ppc/platforms/4xx/virtex.c create mode 100644 arch/ppc/platforms/4xx/virtex.h (limited to 'arch') diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig index d8837911bbc..203abab32cc 100644 --- a/arch/ppc/platforms/4xx/Kconfig +++ b/arch/ppc/platforms/4xx/Kconfig @@ -208,11 +208,16 @@ config 405GPR depends on SYCAMORE default y -config VIRTEX_II_PRO +config XILINX_VIRTEX_II_PRO bool depends on XILINX_ML300 default y +config XILINX_VIRTEX + bool + depends on XILINX_VIRTEX_II_PRO + default y + config STB03xxx bool depends on REDWOOD_5 || REDWOOD_6 diff --git a/arch/ppc/platforms/4xx/Makefile b/arch/ppc/platforms/4xx/Makefile index c9bb6117095..be4163c8afe 100644 --- a/arch/ppc/platforms/4xx/Makefile +++ b/arch/ppc/platforms/4xx/Makefile @@ -26,4 +26,4 @@ obj-$(CONFIG_440SP) += ibm440sp.o obj-$(CONFIG_440SPE) += ppc440spe.o obj-$(CONFIG_405EP) += ibm405ep.o obj-$(CONFIG_405GPR) += ibm405gpr.o -obj-$(CONFIG_VIRTEX_II_PRO) += virtex-ii_pro.o +obj-$(CONFIG_XILINX_VIRTEX) += virtex.o diff --git a/arch/ppc/platforms/4xx/virtex-ii_pro.c b/arch/ppc/platforms/4xx/virtex-ii_pro.c deleted file mode 100644 index 097cc9d5aca..00000000000 --- a/arch/ppc/platforms/4xx/virtex-ii_pro.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * arch/ppc/platforms/4xx/virtex-ii_pro.c - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * 2002-2004 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is licensed - * "as is" without any warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include "virtex-ii_pro.h" - -/* Have OCP take care of the serial ports. */ -struct ocp_def core_ocp[] = { -#ifdef XPAR_UARTNS550_0_BASEADDR - { .vendor = OCP_VENDOR_XILINX, - .function = OCP_FUNC_16550, - .index = 0, - .paddr = XPAR_UARTNS550_0_BASEADDR, - .irq = XPAR_INTC_0_UARTNS550_0_VEC_ID, - .pm = OCP_CPM_NA - }, -#ifdef XPAR_UARTNS550_1_BASEADDR - { .vendor = OCP_VENDOR_XILINX, - .function = OCP_FUNC_16550, - .index = 1, - .paddr = XPAR_UARTNS550_1_BASEADDR, - .irq = XPAR_INTC_0_UARTNS550_1_VEC_ID, - .pm = OCP_CPM_NA - }, -#ifdef XPAR_UARTNS550_2_BASEADDR - { .vendor = OCP_VENDOR_XILINX, - .function = OCP_FUNC_16550, - .index = 2, - .paddr = XPAR_UARTNS550_2_BASEADDR, - .irq = XPAR_INTC_0_UARTNS550_2_VEC_ID, - .pm = OCP_CPM_NA - }, -#ifdef XPAR_UARTNS550_3_BASEADDR - { .vendor = OCP_VENDOR_XILINX, - .function = OCP_FUNC_16550, - .index = 3, - .paddr = XPAR_UARTNS550_3_BASEADDR, - .irq = XPAR_INTC_0_UARTNS550_3_VEC_ID, - .pm = OCP_CPM_NA - }, -#ifdef XPAR_UARTNS550_4_BASEADDR -#error Edit this file to add more devices. -#endif /* 4 */ -#endif /* 3 */ -#endif /* 2 */ -#endif /* 1 */ -#endif /* 0 */ - { .vendor = OCP_VENDOR_INVALID - } -}; diff --git a/arch/ppc/platforms/4xx/virtex-ii_pro.h b/arch/ppc/platforms/4xx/virtex-ii_pro.h deleted file mode 100644 index 026130c8e72..00000000000 --- a/arch/ppc/platforms/4xx/virtex-ii_pro.h +++ /dev/null @@ -1,99 +0,0 @@ -/* - * arch/ppc/platforms/4xx/virtex-ii_pro.h - * - * Include file that defines the Xilinx Virtex-II Pro processor - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * 2002-2004 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is licensed - * "as is" without any warranty of any kind, whether express or implied. - */ - -#ifdef __KERNEL__ -#ifndef __ASM_VIRTEXIIPRO_H__ -#define __ASM_VIRTEXIIPRO_H__ - -#include -#include - -/* serial defines */ - -#define RS_TABLE_SIZE 4 /* change this and add more devices below - if you have more then 4 16x50 UARTs */ - -#define BASE_BAUD (XPAR_UARTNS550_0_CLOCK_FREQ_HZ/16) - -/* The serial ports in the Virtex-II Pro have each I/O byte in the - * LSByte of a word. This means that iomem_reg_shift needs to be 2 to - * change the byte offsets into word offsets. In addition the base - * addresses need to have 3 added to them to get to the LSByte. - */ -#define STD_UART_OP(num) \ - { 0, BASE_BAUD, 0, XPAR_INTC_0_UARTNS550_##num##_VEC_ID, \ - ASYNC_BOOT_AUTOCONF, \ - .iomem_base = (u8 *)XPAR_UARTNS550_##num##_BASEADDR + 3, \ - .iomem_reg_shift = 2, \ - .io_type = SERIAL_IO_MEM}, - -#if defined(XPAR_INTC_0_UARTNS550_0_VEC_ID) -#define ML300_UART0 STD_UART_OP(0) -#else -#define ML300_UART0 -#endif - -#if defined(XPAR_INTC_0_UARTNS550_1_VEC_ID) -#define ML300_UART1 STD_UART_OP(1) -#else -#define ML300_UART1 -#endif - -#if defined(XPAR_INTC_0_UARTNS550_2_VEC_ID) -#define ML300_UART2 STD_UART_OP(2) -#else -#define ML300_UART2 -#endif - -#if defined(XPAR_INTC_0_UARTNS550_3_VEC_ID) -#define ML300_UART3 STD_UART_OP(3) -#else -#define ML300_UART3 -#endif - -#if defined(XPAR_INTC_0_UARTNS550_4_VEC_ID) -#error Edit this file to add more devices. -#elif defined(XPAR_INTC_0_UARTNS550_3_VEC_ID) -#define NR_SER_PORTS 4 -#elif defined(XPAR_INTC_0_UARTNS550_2_VEC_ID) -#define NR_SER_PORTS 3 -#elif defined(XPAR_INTC_0_UARTNS550_1_VEC_ID) -#define NR_SER_PORTS 2 -#elif defined(XPAR_INTC_0_UARTNS550_0_VEC_ID) -#define NR_SER_PORTS 1 -#else -#define NR_SER_PORTS 0 -#endif - -#if defined(CONFIG_UART0_TTYS0) -#define SERIAL_PORT_DFNS \ - ML300_UART0 \ - ML300_UART1 \ - ML300_UART2 \ - ML300_UART3 -#endif - -#if defined(CONFIG_UART0_TTYS1) -#define SERIAL_PORT_DFNS \ - ML300_UART1 \ - ML300_UART0 \ - ML300_UART2 \ - ML300_UART3 -#endif - -#define DCRN_CPMFR_BASE 0 - -#include - -#endif /* __ASM_VIRTEXIIPRO_H__ */ -#endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/4xx/virtex.c b/arch/ppc/platforms/4xx/virtex.c new file mode 100644 index 00000000000..bbb12c0c0b2 --- /dev/null +++ b/arch/ppc/platforms/4xx/virtex.c @@ -0,0 +1,60 @@ +/* + * arch/ppc/platforms/4xx/virtex.c + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * 2002-2004 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is licensed + * "as is" without any warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include + +/* Have OCP take care of the serial ports. */ +struct ocp_def core_ocp[] = { +#ifdef XPAR_UARTNS550_0_BASEADDR + { .vendor = OCP_VENDOR_XILINX, + .function = OCP_FUNC_16550, + .index = 0, + .paddr = XPAR_UARTNS550_0_BASEADDR, + .irq = XPAR_INTC_0_UARTNS550_0_VEC_ID, + .pm = OCP_CPM_NA + }, +#ifdef XPAR_UARTNS550_1_BASEADDR + { .vendor = OCP_VENDOR_XILINX, + .function = OCP_FUNC_16550, + .index = 1, + .paddr = XPAR_UARTNS550_1_BASEADDR, + .irq = XPAR_INTC_0_UARTNS550_1_VEC_ID, + .pm = OCP_CPM_NA + }, +#ifdef XPAR_UARTNS550_2_BASEADDR + { .vendor = OCP_VENDOR_XILINX, + .function = OCP_FUNC_16550, + .index = 2, + .paddr = XPAR_UARTNS550_2_BASEADDR, + .irq = XPAR_INTC_0_UARTNS550_2_VEC_ID, + .pm = OCP_CPM_NA + }, +#ifdef XPAR_UARTNS550_3_BASEADDR + { .vendor = OCP_VENDOR_XILINX, + .function = OCP_FUNC_16550, + .index = 3, + .paddr = XPAR_UARTNS550_3_BASEADDR, + .irq = XPAR_INTC_0_UARTNS550_3_VEC_ID, + .pm = OCP_CPM_NA + }, +#ifdef XPAR_UARTNS550_4_BASEADDR +#error Edit this file to add more devices. +#endif /* 4 */ +#endif /* 3 */ +#endif /* 2 */ +#endif /* 1 */ +#endif /* 0 */ + { .vendor = OCP_VENDOR_INVALID + } +}; diff --git a/arch/ppc/platforms/4xx/virtex.h b/arch/ppc/platforms/4xx/virtex.h new file mode 100644 index 00000000000..049c767d33e --- /dev/null +++ b/arch/ppc/platforms/4xx/virtex.h @@ -0,0 +1,99 @@ +/* + * arch/ppc/platforms/4xx/virtex.h + * + * Include file that defines the Xilinx Virtex-II Pro processor + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * 2002-2004 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is licensed + * "as is" without any warranty of any kind, whether express or implied. + */ + +#ifdef __KERNEL__ +#ifndef __ASM_VIRTEX_H__ +#define __ASM_VIRTEX_H__ + +#include +#include + +/* serial defines */ + +#define RS_TABLE_SIZE 4 /* change this and add more devices below + if you have more then 4 16x50 UARTs */ + +#define BASE_BAUD (XPAR_UARTNS550_0_CLOCK_FREQ_HZ/16) + +/* The serial ports in the Virtex-II Pro have each I/O byte in the + * LSByte of a word. This means that iomem_reg_shift needs to be 2 to + * change the byte offsets into word offsets. In addition the base + * addresses need to have 3 added to them to get to the LSByte. + */ +#define STD_UART_OP(num) \ + { 0, BASE_BAUD, 0, XPAR_INTC_0_UARTNS550_##num##_VEC_ID, \ + ASYNC_BOOT_AUTOCONF, \ + .iomem_base = (u8 *)XPAR_UARTNS550_##num##_BASEADDR + 3, \ + .iomem_reg_shift = 2, \ + .io_type = SERIAL_IO_MEM}, + +#if defined(XPAR_INTC_0_UARTNS550_0_VEC_ID) +#define ML300_UART0 STD_UART_OP(0) +#else +#define ML300_UART0 +#endif + +#if defined(XPAR_INTC_0_UARTNS550_1_VEC_ID) +#define ML300_UART1 STD_UART_OP(1) +#else +#define ML300_UART1 +#endif + +#if defined(XPAR_INTC_0_UARTNS550_2_VEC_ID) +#define ML300_UART2 STD_UART_OP(2) +#else +#define ML300_UART2 +#endif + +#if defined(XPAR_INTC_0_UARTNS550_3_VEC_ID) +#define ML300_UART3 STD_UART_OP(3) +#else +#define ML300_UART3 +#endif + +#if defined(XPAR_INTC_0_UARTNS550_4_VEC_ID) +#error Edit this file to add more devices. +#elif defined(XPAR_INTC_0_UARTNS550_3_VEC_ID) +#define NR_SER_PORTS 4 +#elif defined(XPAR_INTC_0_UARTNS550_2_VEC_ID) +#define NR_SER_PORTS 3 +#elif defined(XPAR_INTC_0_UARTNS550_1_VEC_ID) +#define NR_SER_PORTS 2 +#elif defined(XPAR_INTC_0_UARTNS550_0_VEC_ID) +#define NR_SER_PORTS 1 +#else +#define NR_SER_PORTS 0 +#endif + +#if defined(CONFIG_UART0_TTYS0) +#define SERIAL_PORT_DFNS \ + ML300_UART0 \ + ML300_UART1 \ + ML300_UART2 \ + ML300_UART3 +#endif + +#if defined(CONFIG_UART0_TTYS1) +#define SERIAL_PORT_DFNS \ + ML300_UART1 \ + ML300_UART0 \ + ML300_UART2 \ + ML300_UART3 +#endif + +#define DCRN_CPMFR_BASE 0 + +#include + +#endif /* __ASM_VIRTEX_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/4xx/xilinx_ml300.c b/arch/ppc/platforms/4xx/xilinx_ml300.c index 0b1b77d986b..b0de0a2f131 100644 --- a/arch/ppc/platforms/4xx/xilinx_ml300.c +++ b/arch/ppc/platforms/4xx/xilinx_ml300.c @@ -22,7 +22,7 @@ #include #include -#include /* for NR_SER_PORTS */ +#include /* for NR_SER_PORTS */ /* * As an overview of how the following functions (platform_init, diff --git a/arch/ppc/platforms/4xx/xilinx_ml300.h b/arch/ppc/platforms/4xx/xilinx_ml300.h index f8c58841233..89939814362 100644 --- a/arch/ppc/platforms/4xx/xilinx_ml300.h +++ b/arch/ppc/platforms/4xx/xilinx_ml300.h @@ -16,7 +16,7 @@ #define __ASM_XILINX_ML300_H__ /* ML300 has a Xilinx Virtex-II Pro processor */ -#include +#include #ifndef __ASSEMBLY__ diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index 159dcd92a6d..6234ee57b31 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -17,7 +17,7 @@ obj-$(CONFIG_440GX) += ibm440gx_common.o obj-$(CONFIG_440SP) += ibm440gx_common.o ibm440sp_common.o obj-$(CONFIG_440SPE) += ibm440gx_common.o ibm440sp_common.o ppc440spe_pcie.o ifeq ($(CONFIG_4xx),y) -ifeq ($(CONFIG_VIRTEX_II_PRO),y) +ifeq ($(CONFIG_XILINX_VIRTEX),y) obj-$(CONFIG_40x) += xilinx_pic.o else ifeq ($(CONFIG_403),y) -- cgit v1.2.3-18-g5258 From 1a42e53d175074f340a3f85042ed64cfc51be216 Mon Sep 17 00:00:00 2001 From: "Grant C. Likely" Date: Thu, 19 Jan 2006 01:12:48 -0700 Subject: [PATCH] powerpc: Migrate Xilinx Vertex support from the OCP bus to the platfom bus. This patch only deals with the serial port definitions as there is no support for any other xilinx IP cores in the kernel tree at the moment. Board specific configuration moved out of virtex.[ch] and into the xparameters.h wrapper. This also prepares for the transition to the flattened device tree model. When the bootloader provides a device tree generated from an xparameters.h files, the kernel will no longer need xparameters/*. The platform bus will get populated with data from the device tree, and the device drivers will be automatically connected to the devices. Only the bootloader (or ppcboot) will need xparameters directly. Signed-off-by: Grant C. Likely Signed-off-by: Paul Mackerras --- arch/ppc/boot/common/ns16550.c | 3 + arch/ppc/boot/simple/embed_config.c | 3 + arch/ppc/platforms/4xx/Kconfig | 5 -- arch/ppc/platforms/4xx/virtex.c | 88 +++++++++++------------- arch/ppc/platforms/4xx/virtex.h | 86 +++-------------------- arch/ppc/platforms/4xx/xparameters/xparameters.h | 21 +++++- 6 files changed, 78 insertions(+), 128 deletions(-) (limited to 'arch') diff --git a/arch/ppc/boot/common/ns16550.c b/arch/ppc/boot/common/ns16550.c index 26818bbb6cf..4f00c93ac87 100644 --- a/arch/ppc/boot/common/ns16550.c +++ b/arch/ppc/boot/common/ns16550.c @@ -8,6 +8,9 @@ #include #include +#if defined(CONFIG_XILINX_VIRTEX) +#include +#endif #include "nonstdio.h" #include "serial.h" diff --git a/arch/ppc/boot/simple/embed_config.c b/arch/ppc/boot/simple/embed_config.c index 491a691d10c..df24202073b 100644 --- a/arch/ppc/boot/simple/embed_config.c +++ b/arch/ppc/boot/simple/embed_config.c @@ -21,6 +21,9 @@ #ifdef CONFIG_40x #include #endif +#ifdef CONFIG_XILINX_VIRTEX +#include +#endif extern unsigned long timebase_period_ns; /* For those boards that don't provide one. diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig index 203abab32cc..057c7c2ab99 100644 --- a/arch/ppc/platforms/4xx/Kconfig +++ b/arch/ppc/platforms/4xx/Kconfig @@ -172,11 +172,6 @@ config IBM_OCP depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT default y -config XILINX_OCP - bool - depends on XILINX_ML300 - default y - config IBM_EMAC4 bool depends on 440GX || 440SP || 440SPE diff --git a/arch/ppc/platforms/4xx/virtex.c b/arch/ppc/platforms/4xx/virtex.c index bbb12c0c0b2..133a8314719 100644 --- a/arch/ppc/platforms/4xx/virtex.c +++ b/arch/ppc/platforms/4xx/virtex.c @@ -1,60 +1,56 @@ /* - * arch/ppc/platforms/4xx/virtex.c + * Virtex-II Pro & Virtex-4 FX common infrastructure * - * Author: MontaVista Software, Inc. - * source@mvista.com + * Maintainer: Grant Likely * - * 2002-2004 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is licensed - * "as is" without any warranty of any kind, whether express or implied. + * Copyright 2005 Secret Lab Technologies Ltd. + * Copyright 2005 General Dynamics Canada Ltd. + * Copyright 2005 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. */ -#include #include -#include +#include +#include +#include +#include #include +#include + +#define XPAR_UART(num) { \ + .mapbase = XPAR_UARTNS550_##num##_BASEADDR + 3, \ + .irq = XPAR_INTC_0_UARTNS550_##num##_VEC_ID, \ + .iotype = UPIO_MEM, \ + .uartclk = XPAR_UARTNS550_##num##_CLOCK_FREQ_HZ, \ + .flags = UPF_BOOT_AUTOCONF, \ + .regshift = 2, \ + } -/* Have OCP take care of the serial ports. */ -struct ocp_def core_ocp[] = { +struct plat_serial8250_port serial_platform_data[] = { #ifdef XPAR_UARTNS550_0_BASEADDR - { .vendor = OCP_VENDOR_XILINX, - .function = OCP_FUNC_16550, - .index = 0, - .paddr = XPAR_UARTNS550_0_BASEADDR, - .irq = XPAR_INTC_0_UARTNS550_0_VEC_ID, - .pm = OCP_CPM_NA - }, + XPAR_UART(0), +#endif #ifdef XPAR_UARTNS550_1_BASEADDR - { .vendor = OCP_VENDOR_XILINX, - .function = OCP_FUNC_16550, - .index = 1, - .paddr = XPAR_UARTNS550_1_BASEADDR, - .irq = XPAR_INTC_0_UARTNS550_1_VEC_ID, - .pm = OCP_CPM_NA - }, + XPAR_UART(1), +#endif #ifdef XPAR_UARTNS550_2_BASEADDR - { .vendor = OCP_VENDOR_XILINX, - .function = OCP_FUNC_16550, - .index = 2, - .paddr = XPAR_UARTNS550_2_BASEADDR, - .irq = XPAR_INTC_0_UARTNS550_2_VEC_ID, - .pm = OCP_CPM_NA - }, + XPAR_UART(2), +#endif #ifdef XPAR_UARTNS550_3_BASEADDR - { .vendor = OCP_VENDOR_XILINX, - .function = OCP_FUNC_16550, - .index = 3, - .paddr = XPAR_UARTNS550_3_BASEADDR, - .irq = XPAR_INTC_0_UARTNS550_3_VEC_ID, - .pm = OCP_CPM_NA + XPAR_UART(3), +#endif + { }, /* terminated by empty record */ +}; + +struct platform_device ppc_sys_platform_devices[] = { + [VIRTEX_UART] = { + .name = "serial8250", + .id = 0, + .dev.platform_data = serial_platform_data, }, -#ifdef XPAR_UARTNS550_4_BASEADDR -#error Edit this file to add more devices. -#endif /* 4 */ -#endif /* 3 */ -#endif /* 2 */ -#endif /* 1 */ -#endif /* 0 */ - { .vendor = OCP_VENDOR_INVALID - } }; + diff --git a/arch/ppc/platforms/4xx/virtex.h b/arch/ppc/platforms/4xx/virtex.h index 049c767d33e..1a01b81cff1 100644 --- a/arch/ppc/platforms/4xx/virtex.h +++ b/arch/ppc/platforms/4xx/virtex.h @@ -15,85 +15,21 @@ #ifndef __ASM_VIRTEX_H__ #define __ASM_VIRTEX_H__ -#include -#include - /* serial defines */ -#define RS_TABLE_SIZE 4 /* change this and add more devices below - if you have more then 4 16x50 UARTs */ - -#define BASE_BAUD (XPAR_UARTNS550_0_CLOCK_FREQ_HZ/16) - -/* The serial ports in the Virtex-II Pro have each I/O byte in the - * LSByte of a word. This means that iomem_reg_shift needs to be 2 to - * change the byte offsets into word offsets. In addition the base - * addresses need to have 3 added to them to get to the LSByte. - */ -#define STD_UART_OP(num) \ - { 0, BASE_BAUD, 0, XPAR_INTC_0_UARTNS550_##num##_VEC_ID, \ - ASYNC_BOOT_AUTOCONF, \ - .iomem_base = (u8 *)XPAR_UARTNS550_##num##_BASEADDR + 3, \ - .iomem_reg_shift = 2, \ - .io_type = SERIAL_IO_MEM}, - -#if defined(XPAR_INTC_0_UARTNS550_0_VEC_ID) -#define ML300_UART0 STD_UART_OP(0) -#else -#define ML300_UART0 -#endif - -#if defined(XPAR_INTC_0_UARTNS550_1_VEC_ID) -#define ML300_UART1 STD_UART_OP(1) -#else -#define ML300_UART1 -#endif - -#if defined(XPAR_INTC_0_UARTNS550_2_VEC_ID) -#define ML300_UART2 STD_UART_OP(2) -#else -#define ML300_UART2 -#endif - -#if defined(XPAR_INTC_0_UARTNS550_3_VEC_ID) -#define ML300_UART3 STD_UART_OP(3) -#else -#define ML300_UART3 -#endif - -#if defined(XPAR_INTC_0_UARTNS550_4_VEC_ID) -#error Edit this file to add more devices. -#elif defined(XPAR_INTC_0_UARTNS550_3_VEC_ID) -#define NR_SER_PORTS 4 -#elif defined(XPAR_INTC_0_UARTNS550_2_VEC_ID) -#define NR_SER_PORTS 3 -#elif defined(XPAR_INTC_0_UARTNS550_1_VEC_ID) -#define NR_SER_PORTS 2 -#elif defined(XPAR_INTC_0_UARTNS550_0_VEC_ID) -#define NR_SER_PORTS 1 -#else -#define NR_SER_PORTS 0 -#endif +#include -#if defined(CONFIG_UART0_TTYS0) -#define SERIAL_PORT_DFNS \ - ML300_UART0 \ - ML300_UART1 \ - ML300_UART2 \ - ML300_UART3 +/* Ugly, ugly, ugly! BASE_BAUD defined here to keep 8250.c happy. */ +#if !defined(BASE_BAUD) + #define BASE_BAUD (0) /* dummy value; not used */ #endif - -#if defined(CONFIG_UART0_TTYS1) -#define SERIAL_PORT_DFNS \ - ML300_UART1 \ - ML300_UART0 \ - ML300_UART2 \ - ML300_UART3 + +/* Device type enumeration for platform bus definitions */ +#ifndef __ASSEMBLY__ +enum ppc_sys_devices { + VIRTEX_UART, +}; #endif - -#define DCRN_CPMFR_BASE 0 - -#include - + #endif /* __ASM_VIRTEX_H__ */ #endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/4xx/xparameters/xparameters.h b/arch/ppc/platforms/4xx/xparameters/xparameters.h index fe4eac62913..7b7304379dd 100644 --- a/arch/ppc/platforms/4xx/xparameters/xparameters.h +++ b/arch/ppc/platforms/4xx/xparameters/xparameters.h @@ -1,7 +1,8 @@ /* * include/asm-ppc/xparameters.h * - * This file includes the correct xparameters.h for the CONFIG'ed board + * This file includes the correct xparameters.h for the CONFIG'ed board plus + * fixups to translate board specific XPAR values to a common set of names * * Author: MontaVista Software, Inc. * source@mvista.com @@ -14,5 +15,21 @@ #include #if defined(CONFIG_XILINX_ML300) -#include + #include "xparameters_ml300.h" +#else + /* Add other board xparameter includes here before the #else */ + #error No xparameters_*.h file included +#endif + +#ifndef SERIAL_PORT_DFNS + /* zImage serial port definitions */ + #define RS_TABLE_SIZE 1 + #define SERIAL_PORT_DFNS { \ + .baud_base = XPAR_UARTNS550_0_CLOCK_FREQ_HZ/16, \ + .irq = XPAR_INTC_0_UARTNS550_0_VEC_ID, \ + .flags = ASYNC_BOOT_AUTOCONF, \ + .iomem_base = (u8 *)XPAR_UARTNS550_0_BASEADDR + 3, \ + .iomem_reg_shift = 2, \ + .io_type = SERIAL_IO_MEM, \ + }, #endif -- cgit v1.2.3-18-g5258 From e27db622b850e6426b69ef42e5678ba068c7f8e0 Mon Sep 17 00:00:00 2001 From: "Grant C. Likely" Date: Thu, 19 Jan 2006 01:13:03 -0700 Subject: [PATCH] powerpc: Migrate ML300 reference design to the platform bus Signed-off-by: Grant C. Likely Signed-off-by: Paul Mackerras --- arch/ppc/Kconfig.debug | 2 +- arch/ppc/platforms/4xx/xilinx_ml300.c | 74 ++++++++++++++++++++++++----------- arch/ppc/platforms/4xx/xilinx_ml300.h | 2 +- arch/ppc/syslib/Makefile | 2 +- 4 files changed, 55 insertions(+), 25 deletions(-) (limited to 'arch') diff --git a/arch/ppc/Kconfig.debug b/arch/ppc/Kconfig.debug index 61653cb60c4..8cc75abf3d8 100644 --- a/arch/ppc/Kconfig.debug +++ b/arch/ppc/Kconfig.debug @@ -67,7 +67,7 @@ config SERIAL_TEXT_DEBUG config PPC_OCP bool - depends on IBM_OCP || XILINX_OCP + depends on IBM_OCP default y endmenu diff --git a/arch/ppc/platforms/4xx/xilinx_ml300.c b/arch/ppc/platforms/4xx/xilinx_ml300.c index b0de0a2f131..267afb50607 100644 --- a/arch/ppc/platforms/4xx/xilinx_ml300.c +++ b/arch/ppc/platforms/4xx/xilinx_ml300.c @@ -17,12 +17,14 @@ #include #include #include +#include #include #include #include -#include +#include -#include /* for NR_SER_PORTS */ +#include +#include /* * As an overview of how the following functions (platform_init, @@ -54,6 +56,22 @@ * ppc4xx_pic_init arch/ppc/syslib/xilinx_pic.c */ +/* Board specifications structures */ +struct ppc_sys_spec *cur_ppc_sys_spec; +struct ppc_sys_spec ppc_sys_specs[] = { + { + /* Only one entry, always assume the same design */ + .ppc_sys_name = "Xilinx ML300 Reference Design", + .mask = 0x00000000, + .value = 0x00000000, + .num_devices = 1, + .device_list = (enum ppc_sys_devices[]) + { + VIRTEX_UART, + }, + }, +}; + #if defined(XPAR_POWER_0_POWERDOWN_BASEADDR) static volatile unsigned *powerdown_base = @@ -80,28 +98,39 @@ ml300_map_io(void) #endif } +/* Early serial support functions */ static void __init +ml300_early_serial_init(int num, struct plat_serial8250_port *pdata) +{ +#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) + struct uart_port serial_req; + + memset(&serial_req, 0, sizeof(serial_req)); + serial_req.mapbase = pdata->mapbase; + serial_req.membase = pdata->membase; + serial_req.irq = pdata->irq; + serial_req.uartclk = pdata->uartclk; + serial_req.regshift = pdata->regshift; + serial_req.iotype = pdata->iotype; + serial_req.flags = pdata->flags; + gen550_init(num, &serial_req); +#endif +} + +void __init ml300_early_serial_map(void) { #ifdef CONFIG_SERIAL_8250 - struct serial_state old_ports[] = { SERIAL_PORT_DFNS }; - struct uart_port port; - int i; - - /* Setup ioremapped serial port access */ - for (i = 0; i < ARRAY_SIZE(old_ports); i++ ) { - memset(&port, 0, sizeof(port)); - port.membase = ioremap((phys_addr_t)(old_ports[i].iomem_base), 16); - port.irq = old_ports[i].irq; - port.uartclk = old_ports[i].baud_base * 16; - port.regshift = old_ports[i].iomem_reg_shift; - port.iotype = SERIAL_IO_MEM; - port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; - port.line = i; - - if (early_serial_setup(&port) != 0) { - printk("Early serial init of port %d failed\n", i); - } + struct plat_serial8250_port *pdata; + int i = 0; + + pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(VIRTEX_UART); + while(pdata && pdata->flags) + { + pdata->membase = ioremap(pdata->mapbase, 0x100); + ml300_early_serial_init(i, pdata); + pdata++; + i++; } #endif /* CONFIG_SERIAL_8250 */ } @@ -109,9 +138,8 @@ ml300_early_serial_map(void) void __init ml300_setup_arch(void) { - ppc4xx_setup_arch(); /* calls ppc4xx_find_bridges() */ - ml300_early_serial_map(); + ppc4xx_setup_arch(); /* calls ppc4xx_find_bridges() */ /* Identify the system */ printk(KERN_INFO "Xilinx Virtex-II Pro port\n"); @@ -131,6 +159,8 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, { ppc4xx_init(r3, r4, r5, r6, r7); + identify_ppc_sys_by_id(mfspr(SPRN_PVR)); + ppc_md.setup_arch = ml300_setup_arch; ppc_md.setup_io_mappings = ml300_map_io; ppc_md.init_IRQ = ml300_init_irq; diff --git a/arch/ppc/platforms/4xx/xilinx_ml300.h b/arch/ppc/platforms/4xx/xilinx_ml300.h index 89939814362..ae8bf1353b0 100644 --- a/arch/ppc/platforms/4xx/xilinx_ml300.h +++ b/arch/ppc/platforms/4xx/xilinx_ml300.h @@ -41,7 +41,7 @@ typedef struct board_info { #define PPC4xx_ONB_IO_VADDR 0u #define PPC4xx_ONB_IO_SIZE 0u -#define PPC4xx_MACHINE_NAME "Xilinx ML300" +#define PPC4xx_MACHINE_NAME "Xilinx ML300 Reference System" #endif /* __ASM_XILINX_ML300_H__ */ #endif /* __KERNEL__ */ diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index 6234ee57b31..5cb62c6a51c 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -18,7 +18,7 @@ obj-$(CONFIG_440SP) += ibm440gx_common.o ibm440sp_common.o obj-$(CONFIG_440SPE) += ibm440gx_common.o ibm440sp_common.o ppc440spe_pcie.o ifeq ($(CONFIG_4xx),y) ifeq ($(CONFIG_XILINX_VIRTEX),y) -obj-$(CONFIG_40x) += xilinx_pic.o +obj-$(CONFIG_40x) += xilinx_pic.o ppc_sys.o else ifeq ($(CONFIG_403),y) obj-$(CONFIG_40x) += ppc403_pic.o -- cgit v1.2.3-18-g5258 From 5eb446cb72f67fdb87b2a1dd16262b75edbe30bc Mon Sep 17 00:00:00 2001 From: "Grant C. Likely" Date: Thu, 19 Jan 2006 01:13:12 -0700 Subject: [PATCH] powerpc: Add ML300 defconfig Signed-off-by: Grant C. Likely Signed-off-by: Paul Mackerras --- arch/ppc/configs/ml300_defconfig | 739 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 739 insertions(+) create mode 100644 arch/ppc/configs/ml300_defconfig (limited to 'arch') diff --git a/arch/ppc/configs/ml300_defconfig b/arch/ppc/configs/ml300_defconfig new file mode 100644 index 00000000000..4a33aca948c --- /dev/null +++ b/arch/ppc/configs/ml300_defconfig @@ -0,0 +1,739 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.16-rc1 +# Wed Jan 18 00:49:20 2006 +# +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_PPC=y +CONFIG_PPC32=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_OBSOLETE_MODPARM=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_LBD=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Processor +# +# CONFIG_6xx is not set +CONFIG_40x=y +# CONFIG_44x is not set +# CONFIG_POWER3 is not set +# CONFIG_8xx is not set +# CONFIG_E200 is not set +# CONFIG_E500 is not set +# CONFIG_MATH_EMULATION is not set +# CONFIG_KEXEC is not set +# CONFIG_CPU_FREQ is not set +CONFIG_4xx=y +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# IBM 4xx options +# +# CONFIG_BUBINGA is not set +# CONFIG_CPCI405 is not set +# CONFIG_EP405 is not set +# CONFIG_REDWOOD_5 is not set +# CONFIG_REDWOOD_6 is not set +# CONFIG_SYCAMORE is not set +# CONFIG_WALNUT is not set +CONFIG_XILINX_ML300=y +CONFIG_IBM405_ERR77=y +CONFIG_IBM405_ERR51=y +CONFIG_XILINX_VIRTEX=y +CONFIG_EMBEDDEDBOOT=y +# CONFIG_PPC4xx_DMA is not set +CONFIG_PPC_GEN550=y +CONFIG_UART0_TTYS0=y +# CONFIG_UART0_TTYS1 is not set +CONFIG_NOT_COHERENT_CACHE=y + +# +# Platform options +# +# CONFIG_PC_KEYBOARD is not set +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttyS0,9600" +# CONFIG_PM is not set +# CONFIG_SOFTWARE_SUSPEND is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +# CONFIG_PPC_I8259 is not set +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_CONSISTENT_START=0xff100000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_BOOT_LOAD=0x00400000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Macintosh device drivers +# +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=y + +# +# PHY device support +# + +# +# Ethernet (10 or 100Mbit) +# +# CONFIG_NET_ETHERNET is not set +# CONFIG_IBM_EMAC is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y + +# +# IBM 40x options +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_KGDB is not set +CONFIG_XMON=y +# CONFIG_BDI_SWITCH is not set +# CONFIG_SERIAL_TEXT_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# -- cgit v1.2.3-18-g5258 From 72646c7f69acad3595cc69f82a6e664a23b05542 Mon Sep 17 00:00:00 2001 From: "Grant C. Likely" Date: Thu, 19 Jan 2006 01:13:20 -0700 Subject: [PATCH] powerpc: Add Virtex-4 FX to cpu table Signed-off-by: Grant C. Likely Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/cputable.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 10696456a4c..3191be7135f 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -891,7 +891,7 @@ struct cpu_spec cpu_specs[] = { .platform = "ppc405", }, { /* Xilinx Virtex-II Pro */ - .pvr_mask = 0xffff0000, + .pvr_mask = 0xfffff000, .pvr_value = 0x20010000, .cpu_name = "Virtex-II Pro", .cpu_features = CPU_FTRS_40X, @@ -901,6 +901,16 @@ struct cpu_spec cpu_specs[] = { .dcache_bsize = 32, .platform = "ppc405", }, + { /* Xilinx Virtex-4 FX */ + .pvr_mask = 0xfffff000, + .pvr_value = 0x20011000, + .cpu_name = "Virtex-4 FX", + .cpu_features = CPU_FTRS_40X, + .cpu_user_features = PPC_FEATURE_32 | + PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, + .icache_bsize = 32, + .dcache_bsize = 32, + }, { /* 405EP */ .pvr_mask = 0xffff0000, .pvr_value = 0x51210000, -- cgit v1.2.3-18-g5258 From b58b5aa51c78079fa4f652cd42e7b496a1d5411a Mon Sep 17 00:00:00 2001 From: "Grant C. Likely" Date: Thu, 19 Jan 2006 01:13:28 -0700 Subject: [PATCH] powerpc: Add xparameters file for Xilinx ML403 reference design Signed-off-by: Grant C. Likely Signed-off-by: Paul Mackerras --- .../platforms/4xx/xparameters/xparameters_ml403.h | 243 +++++++++++++++++++++ 1 file changed, 243 insertions(+) create mode 100644 arch/ppc/platforms/4xx/xparameters/xparameters_ml403.h (limited to 'arch') diff --git a/arch/ppc/platforms/4xx/xparameters/xparameters_ml403.h b/arch/ppc/platforms/4xx/xparameters/xparameters_ml403.h new file mode 100644 index 00000000000..5cacdcb3964 --- /dev/null +++ b/arch/ppc/platforms/4xx/xparameters/xparameters_ml403.h @@ -0,0 +1,243 @@ + +/******************************************************************* +* +* CAUTION: This file is automatically generated by libgen. +* Version: Xilinx EDK 7.1.2 EDK_H.12.5.1 +* DO NOT EDIT. +* +* Copyright (c) 2005 Xilinx, Inc. All rights reserved. +* +* Description: Driver parameters +* +*******************************************************************/ + +#define XPAR_PLB_BRAM_IF_CNTLR_0_BASEADDR 0xFFFF0000 +#define XPAR_PLB_BRAM_IF_CNTLR_0_HIGHADDR 0xFFFFFFFF + +/******************************************************************/ + +#define XPAR_OPB_EMC_0_MEM0_BASEADDR 0x20000000 +#define XPAR_OPB_EMC_0_MEM0_HIGHADDR 0x200FFFFF +#define XPAR_OPB_EMC_0_MEM1_BASEADDR 0x28000000 +#define XPAR_OPB_EMC_0_MEM1_HIGHADDR 0x287FFFFF +#define XPAR_OPB_AC97_CONTROLLER_REF_0_BASEADDR 0xA6000000 +#define XPAR_OPB_AC97_CONTROLLER_REF_0_HIGHADDR 0xA60000FF +#define XPAR_OPB_EMC_USB_0_MEM0_BASEADDR 0xA5000000 +#define XPAR_OPB_EMC_USB_0_MEM0_HIGHADDR 0xA50000FF +#define XPAR_PLB_DDR_0_MEM0_BASEADDR 0x00000000 +#define XPAR_PLB_DDR_0_MEM0_HIGHADDR 0x0FFFFFFF + +/******************************************************************/ + +#define XPAR_XEMAC_NUM_INSTANCES 1 +#define XPAR_OPB_ETHERNET_0_BASEADDR 0x60000000 +#define XPAR_OPB_ETHERNET_0_HIGHADDR 0x60003FFF +#define XPAR_OPB_ETHERNET_0_DEVICE_ID 0 +#define XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST 1 +#define XPAR_OPB_ETHERNET_0_DMA_PRESENT 1 +#define XPAR_OPB_ETHERNET_0_MII_EXIST 1 + +/******************************************************************/ + +#define XPAR_XUARTNS550_NUM_INSTANCES 1 +#define XPAR_XUARTNS550_CLOCK_HZ 100000000 +#define XPAR_OPB_UART16550_0_BASEADDR 0xA0000000 +#define XPAR_OPB_UART16550_0_HIGHADDR 0xA0001FFF +#define XPAR_OPB_UART16550_0_DEVICE_ID 0 + +/******************************************************************/ + +#define XPAR_XGPIO_NUM_INSTANCES 3 +#define XPAR_OPB_GPIO_0_BASEADDR 0x90000000 +#define XPAR_OPB_GPIO_0_HIGHADDR 0x900001FF +#define XPAR_OPB_GPIO_0_DEVICE_ID 0 +#define XPAR_OPB_GPIO_0_INTERRUPT_PRESENT 0 +#define XPAR_OPB_GPIO_0_IS_DUAL 1 +#define XPAR_OPB_GPIO_EXP_HDR_0_BASEADDR 0x90001000 +#define XPAR_OPB_GPIO_EXP_HDR_0_HIGHADDR 0x900011FF +#define XPAR_OPB_GPIO_EXP_HDR_0_DEVICE_ID 1 +#define XPAR_OPB_GPIO_EXP_HDR_0_INTERRUPT_PRESENT 0 +#define XPAR_OPB_GPIO_EXP_HDR_0_IS_DUAL 1 +#define XPAR_OPB_GPIO_CHAR_LCD_0_BASEADDR 0x90002000 +#define XPAR_OPB_GPIO_CHAR_LCD_0_HIGHADDR 0x900021FF +#define XPAR_OPB_GPIO_CHAR_LCD_0_DEVICE_ID 2 +#define XPAR_OPB_GPIO_CHAR_LCD_0_INTERRUPT_PRESENT 0 +#define XPAR_OPB_GPIO_CHAR_LCD_0_IS_DUAL 0 + +/******************************************************************/ + +#define XPAR_XPS2_NUM_INSTANCES 2 +#define XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_0 0 +#define XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_0 0xA9000000 +#define XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_0 (0xA9000000+0x3F) +#define XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_1 1 +#define XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_1 (0xA9000000+0x1000) +#define XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_1 (0xA9000000+0x103F) + +/******************************************************************/ + +#define XPAR_XIIC_NUM_INSTANCES 1 +#define XPAR_OPB_IIC_0_BASEADDR 0xA8000000 +#define XPAR_OPB_IIC_0_HIGHADDR 0xA80001FF +#define XPAR_OPB_IIC_0_DEVICE_ID 0 +#define XPAR_OPB_IIC_0_TEN_BIT_ADR 0 +#define XPAR_OPB_IIC_0_GPO_WIDTH 1 + +/******************************************************************/ + +#define XPAR_INTC_MAX_NUM_INTR_INPUTS 10 +#define XPAR_XINTC_HAS_IPR 1 +#define XPAR_XINTC_USE_DCR 0 +#define XPAR_XINTC_NUM_INSTANCES 1 +#define XPAR_OPB_INTC_0_BASEADDR 0xD1000FC0 +#define XPAR_OPB_INTC_0_HIGHADDR 0xD1000FDF +#define XPAR_OPB_INTC_0_DEVICE_ID 0 +#define XPAR_OPB_INTC_0_KIND_OF_INTR 0x00000000 + +/******************************************************************/ + +#define XPAR_INTC_SINGLE_BASEADDR 0xD1000FC0 +#define XPAR_INTC_SINGLE_HIGHADDR 0xD1000FDF +#define XPAR_INTC_SINGLE_DEVICE_ID XPAR_OPB_INTC_0_DEVICE_ID +#define XPAR_OPB_ETHERNET_0_IP2INTC_IRPT_MASK 0X000001 +#define XPAR_OPB_INTC_0_OPB_ETHERNET_0_IP2INTC_IRPT_INTR 0 +#define XPAR_SYSTEM_USB_HPI_INT_MASK 0X000002 +#define XPAR_OPB_INTC_0_SYSTEM_USB_HPI_INT_INTR 1 +#define XPAR_MISC_LOGIC_0_PHY_MII_INT_MASK 0X000004 +#define XPAR_OPB_INTC_0_MISC_LOGIC_0_PHY_MII_INT_INTR 2 +#define XPAR_OPB_SYSACE_0_SYSACE_IRQ_MASK 0X000008 +#define XPAR_OPB_INTC_0_OPB_SYSACE_0_SYSACE_IRQ_INTR 3 +#define XPAR_OPB_AC97_CONTROLLER_REF_0_RECORD_INTERRUPT_MASK 0X000010 +#define XPAR_OPB_INTC_0_OPB_AC97_CONTROLLER_REF_0_RECORD_INTERRUPT_INTR 4 +#define XPAR_OPB_AC97_CONTROLLER_REF_0_PLAYBACK_INTERRUPT_MASK 0X000020 +#define XPAR_OPB_INTC_0_OPB_AC97_CONTROLLER_REF_0_PLAYBACK_INTERRUPT_INTR 5 +#define XPAR_OPB_IIC_0_IP2INTC_IRPT_MASK 0X000040 +#define XPAR_OPB_INTC_0_OPB_IIC_0_IP2INTC_IRPT_INTR 6 +#define XPAR_OPB_PS2_DUAL_REF_0_SYS_INTR2_MASK 0X000080 +#define XPAR_OPB_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR2_INTR 7 +#define XPAR_OPB_PS2_DUAL_REF_0_SYS_INTR1_MASK 0X000100 +#define XPAR_OPB_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR1_INTR 8 +#define XPAR_OPB_UART16550_0_IP2INTC_IRPT_MASK 0X000200 +#define XPAR_OPB_INTC_0_OPB_UART16550_0_IP2INTC_IRPT_INTR 9 + +/******************************************************************/ + +#define XPAR_XTFT_NUM_INSTANCES 1 +#define XPAR_PLB_TFT_CNTLR_REF_0_DCR_BASEADDR 0xD0000200 +#define XPAR_PLB_TFT_CNTLR_REF_0_DCR_HIGHADDR 0xD0000207 +#define XPAR_PLB_TFT_CNTLR_REF_0_DEVICE_ID 0 + +/******************************************************************/ + +#define XPAR_XSYSACE_MEM_WIDTH 16 +#define XPAR_XSYSACE_NUM_INSTANCES 1 +#define XPAR_OPB_SYSACE_0_BASEADDR 0xCF000000 +#define XPAR_OPB_SYSACE_0_HIGHADDR 0xCF0001FF +#define XPAR_OPB_SYSACE_0_DEVICE_ID 0 +#define XPAR_OPB_SYSACE_0_MEM_WIDTH 16 + +/******************************************************************/ + +#define XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ 300000000 + +/******************************************************************/ + + +/******************************************************************/ + +/* Linux Redefines */ + +/******************************************************************/ + +#define XPAR_UARTNS550_0_BASEADDR (XPAR_OPB_UART16550_0_BASEADDR+0x1000) +#define XPAR_UARTNS550_0_HIGHADDR XPAR_OPB_UART16550_0_HIGHADDR +#define XPAR_UARTNS550_0_CLOCK_FREQ_HZ XPAR_XUARTNS550_CLOCK_HZ +#define XPAR_UARTNS550_0_DEVICE_ID XPAR_OPB_UART16550_0_DEVICE_ID + +/******************************************************************/ + +#define XPAR_INTC_0_BASEADDR XPAR_OPB_INTC_0_BASEADDR +#define XPAR_INTC_0_HIGHADDR XPAR_OPB_INTC_0_HIGHADDR +#define XPAR_INTC_0_KIND_OF_INTR XPAR_OPB_INTC_0_KIND_OF_INTR +#define XPAR_INTC_0_DEVICE_ID XPAR_OPB_INTC_0_DEVICE_ID + +/******************************************************************/ + +#define XPAR_INTC_0_EMAC_0_VEC_ID XPAR_OPB_INTC_0_OPB_ETHERNET_0_IP2INTC_IRPT_INTR +#define XPAR_INTC_0_SYSACE_0_VEC_ID XPAR_OPB_INTC_0_OPB_SYSACE_0_SYSACE_IRQ_INTR +#define XPAR_INTC_0_IIC_0_VEC_ID XPAR_OPB_INTC_0_OPB_IIC_0_IP2INTC_IRPT_INTR +#define XPAR_INTC_0_PS2_1_VEC_ID XPAR_OPB_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR2_INTR +#define XPAR_INTC_0_PS2_0_VEC_ID XPAR_OPB_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR1_INTR +#define XPAR_INTC_0_UARTNS550_0_VEC_ID XPAR_OPB_INTC_0_OPB_UART16550_0_IP2INTC_IRPT_INTR + +/******************************************************************/ + +#define XPAR_TFT_0_BASEADDR XPAR_PLB_TFT_CNTLR_REF_0_DCR_BASEADDR + +/******************************************************************/ + +#define XPAR_EMAC_0_BASEADDR XPAR_OPB_ETHERNET_0_BASEADDR +#define XPAR_EMAC_0_HIGHADDR XPAR_OPB_ETHERNET_0_HIGHADDR +#define XPAR_EMAC_0_DMA_PRESENT XPAR_OPB_ETHERNET_0_DMA_PRESENT +#define XPAR_EMAC_0_MII_EXIST XPAR_OPB_ETHERNET_0_MII_EXIST +#define XPAR_EMAC_0_ERR_COUNT_EXIST XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST +#define XPAR_EMAC_0_DEVICE_ID XPAR_OPB_ETHERNET_0_DEVICE_ID + +/******************************************************************/ + +#define XPAR_GPIO_0_BASEADDR XPAR_OPB_GPIO_0_BASEADDR_0 +#define XPAR_GPIO_0_HIGHADDR XPAR_OPB_GPIO_0_HIGHADDR_0 +#define XPAR_GPIO_0_DEVICE_ID XPAR_OPB_GPIO_0_DEVICE_ID_0 +#define XPAR_GPIO_1_BASEADDR XPAR_OPB_GPIO_0_BASEADDR_1 +#define XPAR_GPIO_1_HIGHADDR XPAR_OPB_GPIO_0_HIGHADDR_1 +#define XPAR_GPIO_1_DEVICE_ID XPAR_OPB_GPIO_0_DEVICE_ID_1 +#define XPAR_GPIO_2_BASEADDR XPAR_OPB_GPIO_EXP_HDR_0_BASEADDR_0 +#define XPAR_GPIO_2_HIGHADDR XPAR_OPB_GPIO_EXP_HDR_0_HIGHADDR_0 +#define XPAR_GPIO_2_DEVICE_ID XPAR_OPB_GPIO_EXP_HDR_0_DEVICE_ID_0 +#define XPAR_GPIO_3_BASEADDR XPAR_OPB_GPIO_EXP_HDR_0_BASEADDR_1 +#define XPAR_GPIO_3_HIGHADDR XPAR_OPB_GPIO_EXP_HDR_0_HIGHADDR_1 +#define XPAR_GPIO_3_DEVICE_ID XPAR_OPB_GPIO_EXP_HDR_0_DEVICE_ID_1 +#define XPAR_GPIO_4_BASEADDR XPAR_OPB_GPIO_CHAR_LCD_0_BASEADDR +#define XPAR_GPIO_4_HIGHADDR XPAR_OPB_GPIO_CHAR_LCD_0_HIGHADDR +#define XPAR_GPIO_4_DEVICE_ID XPAR_OPB_GPIO_CHAR_LCD_0_DEVICE_ID + +/******************************************************************/ + +#define XPAR_PS2_0_BASEADDR XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_0 +#define XPAR_PS2_0_HIGHADDR XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_0 +#define XPAR_PS2_0_DEVICE_ID XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_0 +#define XPAR_PS2_1_BASEADDR XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_1 +#define XPAR_PS2_1_HIGHADDR XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_1 +#define XPAR_PS2_1_DEVICE_ID XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_1 + +/******************************************************************/ + +#define XPAR_SYSACE_0_BASEADDR XPAR_OPB_SYSACE_0_BASEADDR +#define XPAR_SYSACE_0_HIGHADDR XPAR_OPB_SYSACE_0_HIGHADDR +#define XPAR_SYSACE_0_DEVICE_ID XPAR_OPB_SYSACE_0_DEVICE_ID + +/******************************************************************/ + +#define XPAR_IIC_0_BASEADDR XPAR_OPB_IIC_0_BASEADDR +#define XPAR_IIC_0_HIGHADDR XPAR_OPB_IIC_0_HIGHADDR +#define XPAR_IIC_0_TEN_BIT_ADR XPAR_OPB_IIC_0_TEN_BIT_ADR +#define XPAR_IIC_0_DEVICE_ID XPAR_OPB_IIC_0_DEVICE_ID + +/******************************************************************/ + +#define XPAR_PLB_CLOCK_FREQ_HZ 100000000 +#define XPAR_CORE_CLOCK_FREQ_HZ XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ +#define XPAR_DDR_0_SIZE 0x4000000 + +/******************************************************************/ + +#define XPAR_PERSISTENT_0_IIC_0_BASEADDR 0x00000400 +#define XPAR_PERSISTENT_0_IIC_0_HIGHADDR 0x000007FF +#define XPAR_PERSISTENT_0_IIC_0_EEPROMADDR 0xA0 + +/******************************************************************/ + +#define XPAR_PCI_0_CLOCK_FREQ_HZ 0 + +/******************************************************************/ + -- cgit v1.2.3-18-g5258 From 909aeca664dd1fe55111dc4ec25c1bebe91674a2 Mon Sep 17 00:00:00 2001 From: "Grant C. Likely" Date: Thu, 19 Jan 2006 01:13:37 -0700 Subject: [PATCH] powerpc: Add support for Xilinx ML403 reference design Includes fix for Xilinx silicon errata 213 Signed-off-by: Grant C. Likely Signed-off-by: Paul Mackerras --- arch/ppc/boot/simple/Makefile | 1 + arch/ppc/boot/simple/embed_config.c | 4 +- arch/ppc/boot/simple/head.S | 7 + arch/ppc/platforms/4xx/Kconfig | 13 +- arch/ppc/platforms/4xx/Makefile | 2 + arch/ppc/platforms/4xx/xilinx_ml403.c | 177 +++++++++++++++++++++++ arch/ppc/platforms/4xx/xilinx_ml403.h | 49 +++++++ arch/ppc/platforms/4xx/xparameters/xparameters.h | 2 + 8 files changed, 251 insertions(+), 4 deletions(-) create mode 100644 arch/ppc/platforms/4xx/xilinx_ml403.c create mode 100644 arch/ppc/platforms/4xx/xilinx_ml403.h (limited to 'arch') diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile index 9533f8de238..28be01b99c4 100644 --- a/arch/ppc/boot/simple/Makefile +++ b/arch/ppc/boot/simple/Makefile @@ -192,6 +192,7 @@ boot-$(CONFIG_8xx) += embed_config.o boot-$(CONFIG_8260) += embed_config.o boot-$(CONFIG_EP405) += embed_config.o boot-$(CONFIG_XILINX_ML300) += embed_config.o +boot-$(CONFIG_XILINX_ML403) += embed_config.o boot-$(CONFIG_BSEIP) += iic.o boot-$(CONFIG_MBX) += iic.o pci.o qspan_pci.o boot-$(CONFIG_MV64X60) += misc-mv64x60.o diff --git a/arch/ppc/boot/simple/embed_config.c b/arch/ppc/boot/simple/embed_config.c index df24202073b..3a51b106294 100644 --- a/arch/ppc/boot/simple/embed_config.c +++ b/arch/ppc/boot/simple/embed_config.c @@ -745,7 +745,7 @@ embed_config(bd_t **bdp) } #endif /* WILLOW */ -#ifdef CONFIG_XILINX_ML300 +#if defined(CONFIG_XILINX_ML300) || defined(CONFIG_XILINX_ML403) void embed_config(bd_t ** bdp) { @@ -782,7 +782,7 @@ embed_config(bd_t ** bdp) timebase_period_ns = 1000000000 / bd->bi_tbfreq; /* see bi_tbfreq definition in arch/ppc/platforms/4xx/xilinx_ml300.h */ } -#endif /* CONFIG_XILINX_ML300 */ +#endif /* CONFIG_XILINX_ML300 || CONFIG_XILINX_ML403 */ #ifdef CONFIG_IBM_OPENBIOS /* This could possibly work for all treeboot roms. diff --git a/arch/ppc/boot/simple/head.S b/arch/ppc/boot/simple/head.S index 5e4adc298bf..119b9dc8958 100644 --- a/arch/ppc/boot/simple/head.S +++ b/arch/ppc/boot/simple/head.S @@ -65,6 +65,13 @@ start_: */ #endif +#if defined(CONFIG_XILINX_VIRTEX_4_FX) + /* PPC errata 213: only for Virtex-4 FX */ + mfccr0 0 + oris 0,0,0x50000000@h + mtccr0 0 +#endif + mflr r3 /* Save our actual starting address. */ /* The following functions we call must not modify r3 or r4..... diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig index 057c7c2ab99..174ddbc9758 100644 --- a/arch/ppc/platforms/4xx/Kconfig +++ b/arch/ppc/platforms/4xx/Kconfig @@ -57,6 +57,10 @@ config XILINX_ML300 help This option enables support for the Xilinx ML300 evaluation board. +config XILINX_ML403 + bool "Xilinx-ML403" + help + This option enables support for the Xilinx ML403 evaluation board. endchoice choice @@ -208,9 +212,14 @@ config XILINX_VIRTEX_II_PRO depends on XILINX_ML300 default y +config XILINX_VIRTEX_4_FX + bool + depends on XILINX_ML403 + default y + config XILINX_VIRTEX bool - depends on XILINX_VIRTEX_II_PRO + depends on XILINX_VIRTEX_II_PRO || XILINX_VIRTEX_4_FX default y config STB03xxx @@ -220,7 +229,7 @@ config STB03xxx config EMBEDDEDBOOT bool - depends on EP405 || XILINX_ML300 + depends on EP405 || XILINX_ML300 || XILINX_ML403 default y config IBM_OPENBIOS diff --git a/arch/ppc/platforms/4xx/Makefile b/arch/ppc/platforms/4xx/Makefile index be4163c8afe..a04a0d0a0f5 100644 --- a/arch/ppc/platforms/4xx/Makefile +++ b/arch/ppc/platforms/4xx/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_REDWOOD_6) += redwood6.o obj-$(CONFIG_SYCAMORE) += sycamore.o obj-$(CONFIG_WALNUT) += walnut.o obj-$(CONFIG_XILINX_ML300) += xilinx_ml300.o +obj-$(CONFIG_XILINX_ML403) += xilinx_ml403.o obj-$(CONFIG_405GP) += ibm405gp.o obj-$(CONFIG_REDWOOD_5) += ibmstb4.o @@ -27,3 +28,4 @@ obj-$(CONFIG_440SPE) += ppc440spe.o obj-$(CONFIG_405EP) += ibm405ep.o obj-$(CONFIG_405GPR) += ibm405gpr.o obj-$(CONFIG_XILINX_VIRTEX) += virtex.o + diff --git a/arch/ppc/platforms/4xx/xilinx_ml403.c b/arch/ppc/platforms/4xx/xilinx_ml403.c new file mode 100644 index 00000000000..4c0c7e4c111 --- /dev/null +++ b/arch/ppc/platforms/4xx/xilinx_ml403.c @@ -0,0 +1,177 @@ +/* + * arch/ppc/platforms/4xx/xilinx_ml403.c + * + * Xilinx ML403 evaluation board initialization + * + * Author: Grant Likely + * + * 2005 (c) Secret Lab Technologies Ltd. + * 2002-2004 (c) MontaVista Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +/* + * As an overview of how the following functions (platform_init, + * ml403_map_io, ml403_setup_arch and ml403_init_IRQ) fit into the + * kernel startup procedure, here's a call tree: + * + * start_here arch/ppc/kernel/head_4xx.S + * early_init arch/ppc/kernel/setup.c + * machine_init arch/ppc/kernel/setup.c + * platform_init this file + * ppc4xx_init arch/ppc/syslib/ppc4xx_setup.c + * parse_bootinfo + * find_bootinfo + * "setup some default ppc_md pointers" + * MMU_init arch/ppc/mm/init.c + * *ppc_md.setup_io_mappings == ml403_map_io this file + * ppc4xx_map_io arch/ppc/syslib/ppc4xx_setup.c + * start_kernel init/main.c + * setup_arch arch/ppc/kernel/setup.c + * #if defined(CONFIG_KGDB) + * *ppc_md.kgdb_map_scc() == gen550_kgdb_map_scc + * #endif + * *ppc_md.setup_arch == ml403_setup_arch this file + * ppc4xx_setup_arch arch/ppc/syslib/ppc4xx_setup.c + * ppc4xx_find_bridges arch/ppc/syslib/ppc405_pci.c + * init_IRQ arch/ppc/kernel/irq.c + * *ppc_md.init_IRQ == ml403_init_IRQ this file + * ppc4xx_init_IRQ arch/ppc/syslib/ppc4xx_setup.c + * ppc4xx_pic_init arch/ppc/syslib/xilinx_pic.c + */ + +/* Board specifications structures */ +struct ppc_sys_spec *cur_ppc_sys_spec; +struct ppc_sys_spec ppc_sys_specs[] = { + { + /* Only one entry, always assume the same design */ + .ppc_sys_name = "Xilinx ML403 Reference Design", + .mask = 0x00000000, + .value = 0x00000000, + .num_devices = 1, + .device_list = (enum ppc_sys_devices[]) + { + VIRTEX_UART, + }, + }, +}; + +#if defined(XPAR_POWER_0_POWERDOWN_BASEADDR) + +static volatile unsigned *powerdown_base = + (volatile unsigned *) XPAR_POWER_0_POWERDOWN_BASEADDR; + +static void +xilinx_power_off(void) +{ + local_irq_disable(); + out_be32(powerdown_base, XPAR_POWER_0_POWERDOWN_VALUE); + while (1) ; +} +#endif + +void __init +ml403_map_io(void) +{ + ppc4xx_map_io(); + +#if defined(XPAR_POWER_0_POWERDOWN_BASEADDR) + powerdown_base = ioremap((unsigned long) powerdown_base, + XPAR_POWER_0_POWERDOWN_HIGHADDR - + XPAR_POWER_0_POWERDOWN_BASEADDR + 1); +#endif +} + +/* Early serial support functions */ +static void __init +ml403_early_serial_init(int num, struct plat_serial8250_port *pdata) +{ +#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) + struct uart_port serial_req; + + memset(&serial_req, 0, sizeof(serial_req)); + serial_req.mapbase = pdata->mapbase; + serial_req.membase = pdata->membase; + serial_req.irq = pdata->irq; + serial_req.uartclk = pdata->uartclk; + serial_req.regshift = pdata->regshift; + serial_req.iotype = pdata->iotype; + serial_req.flags = pdata->flags; + gen550_init(num, &serial_req); +#endif +} + +void __init +ml403_early_serial_map(void) +{ +#ifdef CONFIG_SERIAL_8250 + struct plat_serial8250_port *pdata; + int i = 0; + + pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(VIRTEX_UART); + while(pdata && pdata->flags) + { + pdata->membase = ioremap(pdata->mapbase, 0x100); + ml403_early_serial_init(i, pdata); + pdata++; + i++; + } +#endif /* CONFIG_SERIAL_8250 */ +} + +void __init +ml403_setup_arch(void) +{ + ml403_early_serial_map(); + ppc4xx_setup_arch(); /* calls ppc4xx_find_bridges() */ + + /* Identify the system */ + printk(KERN_INFO "Xilinx ML403 Reference System (Virtex-4 FX)\n"); +} + +/* Called after board_setup_irq from ppc4xx_init_IRQ(). */ +void __init +ml403_init_irq(void) +{ + ppc4xx_init_IRQ(); +} + +void __init +platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + ppc4xx_init(r3, r4, r5, r6, r7); + + identify_ppc_sys_by_id(mfspr(SPRN_PVR)); + + ppc_md.setup_arch = ml403_setup_arch; + ppc_md.setup_io_mappings = ml403_map_io; + ppc_md.init_IRQ = ml403_init_irq; + +#if defined(XPAR_POWER_0_POWERDOWN_BASEADDR) + ppc_md.power_off = xilinx_power_off; +#endif + +#ifdef CONFIG_KGDB + ppc_md.early_serial_map = ml403_early_serial_map; +#endif +} + diff --git a/arch/ppc/platforms/4xx/xilinx_ml403.h b/arch/ppc/platforms/4xx/xilinx_ml403.h new file mode 100644 index 00000000000..47359695990 --- /dev/null +++ b/arch/ppc/platforms/4xx/xilinx_ml403.h @@ -0,0 +1,49 @@ +/* + * arch/ppc/platforms/4xx/xilinx_ml403.h + * + * Include file that defines the Xilinx ML403 reference design + * + * Author: Grant Likely + * + * 2005 (c) Secret Lab Technologies Ltd. + * 2002-2004 (c) MontaVista Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifdef __KERNEL__ +#ifndef __ASM_XILINX_ML403_H__ +#define __ASM_XILINX_ML403_H__ + +/* ML403 has a Xilinx Virtex-4 FPGA with a PPC405 hard core */ +#include + +#ifndef __ASSEMBLY__ + +#include + +typedef struct board_info { + unsigned int bi_memsize; /* DRAM installed, in bytes */ + unsigned char bi_enetaddr[6]; /* Local Ethernet MAC address */ + unsigned int bi_intfreq; /* Processor speed, in Hz */ + unsigned int bi_busfreq; /* PLB Bus speed, in Hz */ + unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */ +} bd_t; + +/* Some 4xx parts use a different timebase frequency from the internal clock. +*/ +#define bi_tbfreq bi_intfreq + +#endif /* !__ASSEMBLY__ */ + +/* We don't need anything mapped. Size of zero will accomplish that. */ +#define PPC4xx_ONB_IO_PADDR 0u +#define PPC4xx_ONB_IO_VADDR 0u +#define PPC4xx_ONB_IO_SIZE 0u + +#define PPC4xx_MACHINE_NAME "Xilinx ML403 Reference Design" + +#endif /* __ASM_XILINX_ML403_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/4xx/xparameters/xparameters.h b/arch/ppc/platforms/4xx/xparameters/xparameters.h index 7b7304379dd..4cf21f25635 100644 --- a/arch/ppc/platforms/4xx/xparameters/xparameters.h +++ b/arch/ppc/platforms/4xx/xparameters/xparameters.h @@ -16,6 +16,8 @@ #if defined(CONFIG_XILINX_ML300) #include "xparameters_ml300.h" +#elif defined(CONFIG_XILINX_ML403) + #include "xparameters_ml403.h" #else /* Add other board xparameter includes here before the #else */ #error No xparameters_*.h file included -- cgit v1.2.3-18-g5258 From b92891751600a1677c2b7f611f8b1e58d53388dc Mon Sep 17 00:00:00 2001 From: "Grant C. Likely" Date: Thu, 19 Jan 2006 01:13:45 -0700 Subject: [PATCH] powerpc: Add ML403 defconfig Signed-off-by: Grant C. Likely Signed-off-by: Paul Mackerras --- arch/ppc/configs/ml403_defconfig | 740 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 740 insertions(+) create mode 100644 arch/ppc/configs/ml403_defconfig (limited to 'arch') diff --git a/arch/ppc/configs/ml403_defconfig b/arch/ppc/configs/ml403_defconfig new file mode 100644 index 00000000000..fafd2516fa5 --- /dev/null +++ b/arch/ppc/configs/ml403_defconfig @@ -0,0 +1,740 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.16-rc1 +# Wed Jan 18 01:11:41 2006 +# +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_PPC=y +CONFIG_PPC32=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_OBSOLETE_MODPARM=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_LBD=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Processor +# +# CONFIG_6xx is not set +CONFIG_40x=y +# CONFIG_44x is not set +# CONFIG_POWER3 is not set +# CONFIG_8xx is not set +# CONFIG_E200 is not set +# CONFIG_E500 is not set +# CONFIG_MATH_EMULATION is not set +# CONFIG_KEXEC is not set +# CONFIG_CPU_FREQ is not set +CONFIG_4xx=y +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# IBM 4xx options +# +# CONFIG_BUBINGA is not set +# CONFIG_CPCI405 is not set +# CONFIG_EP405 is not set +# CONFIG_REDWOOD_5 is not set +# CONFIG_REDWOOD_6 is not set +# CONFIG_SYCAMORE is not set +# CONFIG_WALNUT is not set +# CONFIG_XILINX_ML300 is not set +CONFIG_XILINX_ML403=y +CONFIG_IBM405_ERR77=y +CONFIG_IBM405_ERR51=y +CONFIG_XILINX_VIRTEX=y +CONFIG_EMBEDDEDBOOT=y +# CONFIG_PPC4xx_DMA is not set +CONFIG_PPC_GEN550=y +CONFIG_UART0_TTYS0=y +# CONFIG_UART0_TTYS1 is not set +CONFIG_NOT_COHERENT_CACHE=y + +# +# Platform options +# +# CONFIG_PC_KEYBOARD is not set +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttyS0,9600" +# CONFIG_PM is not set +# CONFIG_SOFTWARE_SUSPEND is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +# CONFIG_PPC_I8259 is not set +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_CONSISTENT_START=0xff100000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_BOOT_LOAD=0x00400000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Macintosh device drivers +# +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=y + +# +# PHY device support +# + +# +# Ethernet (10 or 100Mbit) +# +# CONFIG_NET_ETHERNET is not set +# CONFIG_IBM_EMAC is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y + +# +# IBM 40x options +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_KGDB is not set +CONFIG_XMON=y +# CONFIG_BDI_SWITCH is not set +# CONFIG_SERIAL_TEXT_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# -- cgit v1.2.3-18-g5258 From 42dc75c4b97922d3d7707ac0b097fbeeca20b108 Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Fri, 20 Jan 2006 22:22:36 +0300 Subject: [PATCH] ppc32: MPC885ADS, MPC866ADS and MPC8272ADS-specific platform stuff for fs_enet Added proper ppc_sys identification and fs_platform_info's for MPC 885ADS, 866ADS and 8272ADS, utilizing function assignment to remove/do not use platform devices which conflict with PD-incompatible drivers. Signed-off-by: Vitaly Bordug Signed-off-by: Paul Mackerras --- arch/ppc/Kconfig | 47 ++++ arch/ppc/platforms/Makefile | 3 + arch/ppc/platforms/fads.h | 2 +- arch/ppc/platforms/mpc8272ads_setup.c | 236 +++++++++++++++++++++ arch/ppc/platforms/mpc866ads_setup.c | 273 ++++++++++++++++++++++++ arch/ppc/platforms/mpc885ads_setup.c | 389 ++++++++++++++++++++++++++++++++++ arch/ppc/platforms/pq2ads.h | 4 + arch/ppc/platforms/pq2ads_pd.h | 114 ++++++++++ 8 files changed, 1067 insertions(+), 1 deletion(-) create mode 100644 arch/ppc/platforms/mpc8272ads_setup.c create mode 100644 arch/ppc/platforms/mpc866ads_setup.c create mode 100644 arch/ppc/platforms/mpc885ads_setup.c create mode 100644 arch/ppc/platforms/pq2ads_pd.h (limited to 'arch') diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index 11899f06bf0..54a0a9bb12d 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -481,6 +481,53 @@ config WINCEPT endchoice +menu "Freescale Ethernet driver platform-specific options" + depends on FS_ENET + + config MPC8xx_SECOND_ETH + bool "Second Ethernet channel" + depends on (MPC885ADS || MPC86XADS) + default y + help + This enables support for second Ethernet on MPC885ADS and MPC86xADS boards. + The latter will use SCC1, for 885ADS you can select it below. + + choice + prompt "Second Ethernet channel" + depends on MPC8xx_SECOND_ETH + default MPC8xx_SECOND_ETH_FEC2 + + config MPC8xx_SECOND_ETH_FEC2 + bool "FEC2" + depends on MPC885ADS + help + Enable FEC2 to serve as 2-nd Ethernet channel. Note that SMC2 + (often 2-nd UART) will not work if this is enabled. + + config MPC8xx_SECOND_ETH_SCC1 + bool "SCC1" + depends on MPC86XADS + select MPC8xx_SCC_ENET_FIXED + help + Enable SCC1 to serve as 2-nd Ethernet channel. Note that SMC1 + (often 1-nd UART) will not work if this is enabled. + + config MPC8xx_SECOND_ETH_SCC3 + bool "SCC3" + depends on MPC885ADS + help + Enable SCC3 to serve as 2-nd Ethernet channel. Note that SMC1 + (often 1-nd UART) will not work if this is enabled. + + endchoice + + config MPC8xx_SCC_ENET_FIXED + depends on MPC8xx_SECOND_ETH_SCC + default n + bool "Use fixed MII-less mode for SCC Ethernet" + +endmenu + choice prompt "Machine Type" depends on 6xx || POWER3 diff --git a/arch/ppc/platforms/Makefile b/arch/ppc/platforms/Makefile index 51430e294b3..e8b91a33ce9 100644 --- a/arch/ppc/platforms/Makefile +++ b/arch/ppc/platforms/Makefile @@ -37,6 +37,9 @@ obj-$(CONFIG_SBC82xx) += sbc82xx.o obj-$(CONFIG_SPRUCE) += spruce.o obj-$(CONFIG_LITE5200) += lite5200.o obj-$(CONFIG_EV64360) += ev64360.o +obj-$(CONFIG_MPC86XADS) += mpc866ads_setup.o +obj-$(CONFIG_MPC885ADS) += mpc885ads_setup.o +obj-$(CONFIG_ADS8272) += mpc8272ads_setup.o ifeq ($(CONFIG_SMP),y) obj-$(CONFIG_PPC_CHRP) += chrp_smp.o diff --git a/arch/ppc/platforms/fads.h b/arch/ppc/platforms/fads.h index a48fb8d723e..e1c0b1b6dcb 100644 --- a/arch/ppc/platforms/fads.h +++ b/arch/ppc/platforms/fads.h @@ -112,7 +112,7 @@ /* CPM Ethernet through SCC1 or SCC2 */ -#ifdef CONFIG_SCC1_ENET /* Probably 860 variant */ +#if defined(CONFIG_SCC1_ENET) || defined(CONFIG_MPC8xx_SECOND_ETH_SCC1) /* Probably 860 variant */ /* Bits in parallel I/O port registers that have to be set/cleared * to configure the pins for SCC1 use. * TCLK - CLK1, RCLK - CLK2. diff --git a/arch/ppc/platforms/mpc8272ads_setup.c b/arch/ppc/platforms/mpc8272ads_setup.c new file mode 100644 index 00000000000..bc9b94f77e3 --- /dev/null +++ b/arch/ppc/platforms/mpc8272ads_setup.c @@ -0,0 +1,236 @@ +/* + * arch/ppc/platforms/82xx/pq2ads_pd.c + * + * MPC82xx Board-specific PlatformDevice descriptions + * + * 2005 (c) MontaVista Software, Inc. + * Vitaly Bordug + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include "pq2ads_pd.h" + +static void init_fcc1_ioports(void); +static void init_fcc2_ioports(void); + +static struct fs_mii_bus_info mii_bus_info = { + .method = fsmii_bitbang, + .id = 0, + .i.bitbang = { + .mdio_port = fsiop_portc, + .mdio_bit = 18, + .mdc_port = fsiop_portc, + .mdc_bit = 19, + .delay = 1, + }, +}; + +static struct fs_platform_info mpc82xx_fcc1_pdata = { + .fs_no = fsid_fcc1, + .cp_page = CPM_CR_FCC1_PAGE, + .cp_block = CPM_CR_FCC1_SBLOCK, + .clk_trx = (PC_F1RXCLK | PC_F1TXCLK), + .clk_route = CMX1_CLK_ROUTE, + .clk_mask = CMX1_CLK_MASK, + .init_ioports = init_fcc1_ioports, + + .phy_addr = 0, +#ifdef PHY_INTERRUPT + .phy_irq = PHY_INTERRUPT, +#else + .phy_irq = -1; +#endif + .mem_offset = FCC1_MEM_OFFSET, + .bus_info = &mii_bus_info, + .rx_ring = 32, + .tx_ring = 32, + .rx_copybreak = 240, + .use_napi = 0, + .napi_weight = 17, +}; + +static struct fs_platform_info mpc82xx_fcc2_pdata = { + .fs_no = fsid_fcc2, + .cp_page = CPM_CR_FCC2_PAGE, + .cp_block = CPM_CR_FCC2_SBLOCK, + .clk_trx = (PC_F2RXCLK | PC_F2TXCLK), + .clk_route = CMX2_CLK_ROUTE, + .clk_mask = CMX2_CLK_MASK, + .init_ioports = init_fcc2_ioports, + + .phy_addr = 3, +#ifdef PHY_INTERRUPT + .phy_irq = PHY_INTERRUPT, +#else + .phy_irq = -1; +#endif + .mem_offset = FCC2_MEM_OFFSET, + .bus_info = &mii_bus_info, + .rx_ring = 32, + .tx_ring = 32, + .rx_copybreak = 240, + .use_napi = 0, + .napi_weight = 17, +}; + +static void init_fcc1_ioports(void) +{ + struct io_port *io; + u32 tempval; + cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t)); + u32 *bcsr = ioremap(BCSR_ADDR+4, sizeof(u32)); + + io = &immap->im_ioport; + + /* Enable the PHY */ + clrbits32(bcsr, BCSR1_FETHIEN); + setbits32(bcsr, BCSR1_FETH_RST); + + /* FCC1 pins are on port A/C. */ + /* Configure port A and C pins for FCC1 Ethernet. */ + + tempval = in_be32(&io->iop_pdira); + tempval &= ~PA1_DIRA0; + tempval |= PA1_DIRA1; + out_be32(&io->iop_pdira, tempval); + + tempval = in_be32(&io->iop_psora); + tempval &= ~PA1_PSORA0; + tempval |= PA1_PSORA1; + out_be32(&io->iop_psora, tempval); + + setbits32(&io->iop_ppara,PA1_DIRA0 | PA1_DIRA1); + + /* Alter clocks */ + tempval = PC_F1TXCLK|PC_F1RXCLK; + + clrbits32(&io->iop_psorc, tempval); + clrbits32(&io->iop_pdirc, tempval); + setbits32(&io->iop_pparc, tempval); + + clrbits32(&immap->im_cpmux.cmx_fcr, CMX1_CLK_MASK); + setbits32(&immap->im_cpmux.cmx_fcr, CMX1_CLK_ROUTE); + iounmap(bcsr); + iounmap(immap); +} + +static void init_fcc2_ioports(void) +{ + cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t)); + u32 *bcsr = ioremap(BCSR_ADDR+12, sizeof(u32)); + + struct io_port *io; + u32 tempval; + + immap = cpm2_immr; + + io = &immap->im_ioport; + + /* Enable the PHY */ + clrbits32(bcsr, BCSR3_FETHIEN2); + setbits32(bcsr, BCSR3_FETH2_RST); + + /* FCC2 are port B/C. */ + /* Configure port A and C pins for FCC2 Ethernet. */ + + tempval = in_be32(&io->iop_pdirb); + tempval &= ~PB2_DIRB0; + tempval |= PB2_DIRB1; + out_be32(&io->iop_pdirb, tempval); + + tempval = in_be32(&io->iop_psorb); + tempval &= ~PB2_PSORB0; + tempval |= PB2_PSORB1; + out_be32(&io->iop_psorb, tempval); + + setbits32(&io->iop_pparb,PB2_DIRB0 | PB2_DIRB1); + + tempval = PC_F2RXCLK|PC_F2TXCLK; + + /* Alter clocks */ + clrbits32(&io->iop_psorc,tempval); + clrbits32(&io->iop_pdirc,tempval); + setbits32(&io->iop_pparc,tempval); + + clrbits32(&immap->im_cpmux.cmx_fcr, CMX2_CLK_MASK); + setbits32(&immap->im_cpmux.cmx_fcr, CMX2_CLK_ROUTE); + + iounmap(bcsr); + iounmap(immap); +} + + +static void __init mpc8272ads_fixup_enet_pdata(struct platform_device *pdev, + int idx) +{ + bd_t* bi = (void*)__res; + int fs_no = fsid_fcc1+pdev->id-1; + + mpc82xx_fcc1_pdata.dpram_offset = mpc82xx_fcc2_pdata.dpram_offset = (u32)cpm2_immr->im_dprambase; + mpc82xx_fcc1_pdata.fcc_regs_c = mpc82xx_fcc2_pdata.fcc_regs_c = (u32)cpm2_immr->im_fcc_c; + + switch(fs_no) { + case fsid_fcc1: + memcpy(&mpc82xx_fcc1_pdata.macaddr,bi->bi_enetaddr,6); + pdev->dev.platform_data = &mpc82xx_fcc1_pdata; + break; + case fsid_fcc2: + memcpy(&mpc82xx_fcc2_pdata.macaddr,bi->bi_enetaddr,6); + mpc82xx_fcc2_pdata.macaddr[5] ^= 1; + pdev->dev.platform_data = &mpc82xx_fcc2_pdata; + break; + } +} + +static int mpc8272ads_platform_notify(struct device *dev) +{ + static const struct platform_notify_dev_map dev_map[] = { + { + .bus_id = "fsl-cpm-fcc", + .rtn = mpc8272ads_fixup_enet_pdata + }, + { + .bus_id = NULL + } + }; + platform_notify_map(dev_map,dev); + + return 0; + +} + +int __init mpc8272ads_init(void) +{ + printk(KERN_NOTICE "mpc8272ads: Init\n"); + + platform_notify = mpc8272ads_platform_notify; + + ppc_sys_device_initfunc(); + + ppc_sys_device_disable_all(); + ppc_sys_device_enable(MPC82xx_CPM_FCC1); + ppc_sys_device_enable(MPC82xx_CPM_FCC2); + + return 0; +} + +arch_initcall(mpc8272ads_init); diff --git a/arch/ppc/platforms/mpc866ads_setup.c b/arch/ppc/platforms/mpc866ads_setup.c new file mode 100644 index 00000000000..ac8fcc68afe --- /dev/null +++ b/arch/ppc/platforms/mpc866ads_setup.c @@ -0,0 +1,273 @@ +/*arch/ppc/platforms/mpc885ads-setup.c + * + * Platform setup for the Freescale mpc885ads board + * + * Vitaly Bordug + * + * Copyright 2005 MontaVista Software Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +extern unsigned char __res[]; + +static struct fs_mii_bus_info fec_mii_bus_info = { + .method = fsmii_fec, + .id = 0, +}; + +static struct fs_mii_bus_info scc_mii_bus_info = { + .method = fsmii_fixed, + .id = 0, + .i.fixed.speed = 10, + .i.fixed.duplex = 0, +}; + +static struct fs_platform_info mpc8xx_fec_pdata[] = { + { + .rx_ring = 128, + .tx_ring = 16, + .rx_copybreak = 240, + + .use_napi = 1, + .napi_weight = 17, + + .phy_addr = 15, + .phy_irq = -1, + + .use_rmii = 0, + + .bus_info = &fec_mii_bus_info, + } +}; + +static struct fs_platform_info mpc8xx_scc_pdata = { + .rx_ring = 64, + .tx_ring = 8, + .rx_copybreak = 240, + + .use_napi = 1, + .napi_weight = 17, + + .phy_addr = -1, + .phy_irq = -1, + + .bus_info = &scc_mii_bus_info, +}; + +void __init board_init(void) +{ + volatile cpm8xx_t *cp = cpmp; + unsigned *bcsr_io; + + bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); + + if (bcsr_io == NULL) { + printk(KERN_CRIT "Could not remap BCSR1\n"); + return; + } +#ifdef CONFIG_SERIAL_CPM_SMC1 + cp->cp_simode &= ~(0xe0000000 >> 17); /* brg1 */ + clrbits32(bcsr_io,(0x80000000 >> 7)); +#else + setbits32(bcsr_io,(0x80000000 >> 7)); + + cp->cp_pbpar &= ~(0x000000c0); + cp->cp_pbdir |= 0x000000c0; + cp->cp_smc[0].smc_smcmr = 0; + cp->cp_smc[0].smc_smce = 0; +#endif + +#ifdef CONFIG_SERIAL_CPM_SMC2 + cp->cp_simode &= ~(0xe0000000 >> 1); + cp->cp_simode |= (0x20000000 >> 1); /* brg2 */ + clrbits32(bcsr_io,(0x80000000 >> 13)); +#else + clrbits32(bcsr_io,(0x80000000 >> 13)); + cp->cp_pbpar &= ~(0x00000c00); + cp->cp_pbdir |= 0x00000c00; + cp->cp_smc[1].smc_smcmr = 0; + cp->cp_smc[1].smc_smce = 0; +#endif + iounmap(bcsr_io); +} + +static void setup_fec1_ioports(void) +{ + immap_t *immap = (immap_t *) IMAP_ADDR; + + setbits16(&immap->im_ioport.iop_pdpar, 0x1fff); + setbits16(&immap->im_ioport.iop_pddir, 0x1fff); +} + +static void setup_scc1_ioports(void) +{ + immap_t *immap = (immap_t *) IMAP_ADDR; + unsigned *bcsr_io; + + bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); + + if (bcsr_io == NULL) { + printk(KERN_CRIT "Could not remap BCSR1\n"); + return; + } + + /* Enable the PHY. + */ + clrbits32(bcsr_io,BCSR1_ETHEN); + + /* Configure port A pins for Txd and Rxd. + */ + /* Disable receive and transmit in case EPPC-Bug started it. + */ + setbits16(&immap->im_ioport.iop_papar, PA_ENET_RXD | PA_ENET_TXD); + clrbits16(&immap->im_ioport.iop_padir, PA_ENET_RXD | PA_ENET_TXD); + clrbits16(&immap->im_ioport.iop_paodr, PA_ENET_TXD); + + /* Configure port C pins to enable CLSN and RENA. + */ + clrbits16(&immap->im_ioport.iop_pcpar, PC_ENET_CLSN | PC_ENET_RENA); + clrbits16(&immap->im_ioport.iop_pcdir, PC_ENET_CLSN | PC_ENET_RENA); + setbits16(&immap->im_ioport.iop_pcso, PC_ENET_CLSN | PC_ENET_RENA); + /* Configure port A for TCLK and RCLK. + */ + setbits16(&immap->im_ioport.iop_papar, PA_ENET_TCLK | PA_ENET_RCLK); + clrbits16(&immap->im_ioport.iop_padir, PA_ENET_TCLK | PA_ENET_RCLK); + clrbits32(&immap->im_cpm.cp_pbpar, PB_ENET_TENA); + clrbits32(&immap->im_cpm.cp_pbdir, PB_ENET_TENA); + + /* Configure Serial Interface clock routing. + * First, clear all SCC bits to zero, then set the ones we want. + */ + clrbits32(&immap->im_cpm.cp_sicr, SICR_ENET_MASK); + setbits32(&immap->im_cpm.cp_sicr, SICR_ENET_CLKRT); + + /* In the original SCC enet driver the following code is placed at + the end of the initialization */ + setbits32(&immap->im_cpm.cp_pbpar, PB_ENET_TENA); + setbits32(&immap->im_cpm.cp_pbdir, PB_ENET_TENA); + +} + +static void mpc866ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no) +{ + struct fs_platform_info *fpi = pdev->dev.platform_data; + + volatile cpm8xx_t *cp; + bd_t *bd = (bd_t *) __res; + char *e; + int i; + + /* Get pointer to Communication Processor */ + cp = cpmp; + switch (fs_no) { + case fsid_fec1: + fpi = &mpc8xx_fec_pdata[0]; + fpi->init_ioports = &setup_fec1_ioports; + + break; + case fsid_scc1: + fpi = &mpc8xx_scc_pdata; + fpi->init_ioports = &setup_scc1_ioports; + + break; + default: + printk(KERN_WARNING"Device %s is not supported!\n", pdev->name); + return; + } + + pdev->dev.platform_data = fpi; + fpi->fs_no = fs_no; + + e = (unsigned char *)&bd->bi_enetaddr; + for (i = 0; i < 6; i++) + fpi->macaddr[i] = *e++; + + fpi->macaddr[5 - pdev->id]++; + +} + +static void mpc866ads_fixup_fec_enet_pdata(struct platform_device *pdev, + int idx) +{ + /* This is for FEC devices only */ + if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-fec"))) + return; + mpc866ads_fixup_enet_pdata(pdev, fsid_fec1 + pdev->id - 1); +} + +static void mpc866ads_fixup_scc_enet_pdata(struct platform_device *pdev, + int idx) +{ + /* This is for SCC devices only */ + if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-scc"))) + return; + + mpc866ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1); +} + +static int mpc866ads_platform_notify(struct device *dev) +{ + static const struct platform_notify_dev_map dev_map[] = { + { + .bus_id = "fsl-cpm-fec", + .rtn = mpc866ads_fixup_fec_enet_pdata, + }, + { + .bus_id = "fsl-cpm-scc", + .rtn = mpc866ads_fixup_scc_enet_pdata, + }, + { + .bus_id = NULL + } + }; + + platform_notify_map(dev_map,dev); + + return 0; +} + +int __init mpc866ads_init(void) +{ + printk(KERN_NOTICE "mpc866ads: Init\n"); + + platform_notify = mpc866ads_platform_notify; + + ppc_sys_device_initfunc(); + ppc_sys_device_disable_all(); + +#ifdef MPC8xx_SECOND_ETH_SCC1 + ppc_sys_device_enable(MPC8xx_CPM_SCC1); +#endif + ppc_sys_device_enable(MPC8xx_CPM_FEC1); + + return 0; +} + +arch_initcall(mpc866ads_init); diff --git a/arch/ppc/platforms/mpc885ads_setup.c b/arch/ppc/platforms/mpc885ads_setup.c new file mode 100644 index 00000000000..50a99e5f7c6 --- /dev/null +++ b/arch/ppc/platforms/mpc885ads_setup.c @@ -0,0 +1,389 @@ +/*arch/ppc/platforms/mpc885ads-setup.c + * + * Platform setup for the Freescale mpc885ads board + * + * Vitaly Bordug + * + * Copyright 2005 MontaVista Software Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +extern unsigned char __res[]; + +static void __init mpc885ads_scc_phy_init(char); + +static struct fs_mii_bus_info fec_mii_bus_info = { + .method = fsmii_fec, + .id = 0, +}; + +static struct fs_mii_bus_info scc_mii_bus_info = { +#ifdef CONFIG_SCC_ENET_8xx_FIXED + .method = fsmii_fixed, +#else + .method = fsmii_fec, +#endif + + .id = 0, +}; + +static struct fs_platform_info mpc8xx_fec_pdata[] = { + { + .rx_ring = 128, + .tx_ring = 16, + .rx_copybreak = 240, + + .use_napi = 1, + .napi_weight = 17, + + .phy_addr = 0, + .phy_irq = SIU_IRQ7, + + .bus_info = &fec_mii_bus_info, + }, { + .rx_ring = 128, + .tx_ring = 16, + .rx_copybreak = 240, + + .use_napi = 1, + .napi_weight = 17, + + .phy_addr = 1, + .phy_irq = SIU_IRQ7, + + .bus_info = &fec_mii_bus_info, + } +}; + +static struct fs_platform_info mpc8xx_scc_pdata = { + .rx_ring = 64, + .tx_ring = 8, + .rx_copybreak = 240, + + .use_napi = 1, + .napi_weight = 17, + + .phy_addr = 2, +#ifdef CONFIG_MPC8xx_SCC_ENET_FIXED + .phy_irq = -1, +#else + .phy_irq = SIU_IRQ7, +#endif + + .bus_info = &scc_mii_bus_info, +}; + +void __init board_init(void) +{ + volatile cpm8xx_t *cp = cpmp; + unsigned int *bcsr_io; + +#ifdef CONFIG_FS_ENET + immap_t *immap = (immap_t *) IMAP_ADDR; +#endif + bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); + + if (bcsr_io == NULL) { + printk(KERN_CRIT "Could not remap BCSR\n"); + return; + } +#ifdef CONFIG_SERIAL_CPM_SMC1 + cp->cp_simode &= ~(0xe0000000 >> 17); /* brg1 */ + clrbits32(bcsr_io, BCSR1_RS232EN_1); +#else + setbits32(bcsr_io,BCSR1_RS232EN_1); + cp->cp_smc[0].smc_smcmr = 0; + cp->cp_smc[0].smc_smce = 0; +#endif + +#ifdef CONFIG_SERIAL_CPM_SMC2 + cp->cp_simode &= ~(0xe0000000 >> 1); + cp->cp_simode |= (0x20000000 >> 1); /* brg2 */ + clrbits32(bcsr_io,BCSR1_RS232EN_2); +#else + setbits32(bcsr_io,BCSR1_RS232EN_2); + cp->cp_smc[1].smc_smcmr = 0; + cp->cp_smc[1].smc_smce = 0; +#endif + iounmap(bcsr_io); + +#ifdef CONFIG_FS_ENET + /* use MDC for MII (common) */ + setbits16(&immap->im_ioport.iop_pdpar, 0x0080); + clrbits16(&immap->im_ioport.iop_pddir, 0x0080); +#endif +} + +static void setup_fec1_ioports(void) +{ + immap_t *immap = (immap_t *) IMAP_ADDR; + + /* configure FEC1 pins */ + setbits16(&immap->im_ioport.iop_papar, 0xf830); + setbits16(&immap->im_ioport.iop_padir, 0x0830); + clrbits16(&immap->im_ioport.iop_padir, 0xf000); + setbits32(&immap->im_cpm.cp_pbpar, 0x00001001); + + clrbits32(&immap->im_cpm.cp_pbdir, 0x00001001); + setbits16(&immap->im_ioport.iop_pcpar, 0x000c); + clrbits16(&immap->im_ioport.iop_pcdir, 0x000c); + setbits32(&immap->im_cpm.cp_pepar, 0x00000003); + + setbits32(&immap->im_cpm.cp_pedir, 0x00000003); + clrbits32(&immap->im_cpm.cp_peso, 0x00000003); + clrbits32(&immap->im_cpm.cp_cptr, 0x00000100); +} + +static void setup_fec2_ioports(void) +{ + immap_t *immap = (immap_t *) IMAP_ADDR; + + /* configure FEC2 pins */ + setbits32(&immap->im_cpm.cp_pepar, 0x0003fffc); + setbits32(&immap->im_cpm.cp_pedir, 0x0003fffc); + setbits32(&immap->im_cpm.cp_peso, 0x00037800); + clrbits32(&immap->im_cpm.cp_peso, 0x000087fc); + clrbits32(&immap->im_cpm.cp_cptr, 0x00000080); +} + +static void setup_scc3_ioports(void) +{ + immap_t *immap = (immap_t *) IMAP_ADDR; + unsigned *bcsr_io; + + bcsr_io = ioremap(BCSR_ADDR, BCSR_SIZE); + + if (bcsr_io == NULL) { + printk(KERN_CRIT "Could not remap BCSR\n"); + return; + } + + /* Enable the PHY. + */ + setbits32(bcsr_io+4, BCSR4_ETH10_RST); + /* Configure port A pins for Txd and Rxd. + */ + setbits16(&immap->im_ioport.iop_papar, PA_ENET_RXD | PA_ENET_TXD); + clrbits16(&immap->im_ioport.iop_padir, PA_ENET_RXD | PA_ENET_TXD); + + /* Configure port C pins to enable CLSN and RENA. + */ + clrbits16(&immap->im_ioport.iop_pcpar, PC_ENET_CLSN | PC_ENET_RENA); + clrbits16(&immap->im_ioport.iop_pcdir, PC_ENET_CLSN | PC_ENET_RENA); + setbits16(&immap->im_ioport.iop_pcso, PC_ENET_CLSN | PC_ENET_RENA); + + /* Configure port E for TCLK and RCLK. + */ + setbits32(&immap->im_cpm.cp_pepar, PE_ENET_TCLK | PE_ENET_RCLK); + clrbits32(&immap->im_cpm.cp_pepar, PE_ENET_TENA); + clrbits32(&immap->im_cpm.cp_pedir, + PE_ENET_TCLK | PE_ENET_RCLK | PE_ENET_TENA); + clrbits32(&immap->im_cpm.cp_peso, PE_ENET_TCLK | PE_ENET_RCLK); + setbits32(&immap->im_cpm.cp_peso, PE_ENET_TENA); + + /* Configure Serial Interface clock routing. + * First, clear all SCC bits to zero, then set the ones we want. + */ + clrbits32(&immap->im_cpm.cp_sicr, SICR_ENET_MASK); + setbits32(&immap->im_cpm.cp_sicr, SICR_ENET_CLKRT); + + /* Disable Rx and Tx. SMC1 sshould be stopped if SCC3 eternet are used. + */ + immap->im_cpm.cp_smc[0].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); + /* On the MPC885ADS SCC ethernet PHY is initialized in the full duplex mode + * by H/W setting after reset. SCC ethernet controller support only half duplex. + * This discrepancy of modes causes a lot of carrier lost errors. + */ + + /* In the original SCC enet driver the following code is placed at + the end of the initialization */ + setbits32(&immap->im_cpm.cp_pepar, PE_ENET_TENA); + clrbits32(&immap->im_cpm.cp_pedir, PE_ENET_TENA); + setbits32(&immap->im_cpm.cp_peso, PE_ENET_TENA); + + setbits32(bcsr_io+1, BCSR1_ETHEN); + iounmap(bcsr_io); +} + +static void mpc885ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no) +{ + struct fs_platform_info *fpi = pdev->dev.platform_data; + + volatile cpm8xx_t *cp; + bd_t *bd = (bd_t *) __res; + char *e; + int i; + + /* Get pointer to Communication Processor */ + cp = cpmp; + switch (fs_no) { + case fsid_fec1: + fpi = &mpc8xx_fec_pdata[0]; + fpi->init_ioports = &setup_fec1_ioports; + break; + case fsid_fec2: + fpi = &mpc8xx_fec_pdata[1]; + fpi->init_ioports = &setup_fec2_ioports; + break; + case fsid_scc3: + fpi = &mpc8xx_scc_pdata; + fpi->init_ioports = &setup_scc3_ioports; + mpc885ads_scc_phy_init(fpi->phy_addr); + break; + default: + printk(KERN_WARNING"Device %s is not supported!\n", pdev->name); + return; + } + + pdev->dev.platform_data = fpi; + fpi->fs_no = fs_no; + + e = (unsigned char *)&bd->bi_enetaddr; + for (i = 0; i < 6; i++) + fpi->macaddr[i] = *e++; + + fpi->macaddr[5 - pdev->id]++; + +} + +static void mpc885ads_fixup_fec_enet_pdata(struct platform_device *pdev, + int idx) +{ + /* This is for FEC devices only */ + if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-fec"))) + return; + mpc885ads_fixup_enet_pdata(pdev, fsid_fec1 + pdev->id - 1); +} + +static void __init mpc885ads_fixup_scc_enet_pdata(struct platform_device *pdev, + int idx) +{ + /* This is for SCC devices only */ + if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-scc"))) + return; + + mpc885ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1); +} + +/* SCC ethernet controller does not have MII management channel. FEC1 MII + * channel is used to communicate with the 10Mbit PHY. + */ + +#define MII_ECNTRL_PINMUX 0x4 +#define FEC_ECNTRL_PINMUX 0x00000004 +#define FEC_RCNTRL_MII_MODE 0x00000004 + +/* Make MII read/write commands. + */ +#define mk_mii_write(REG, VAL, PHY_ADDR) (0x50020000 | (((REG) & 0x1f) << 18) | \ + ((VAL) & 0xffff) | ((PHY_ADDR) << 23)) + +static void mpc885ads_scc_phy_init(char phy_addr) +{ + volatile immap_t *immap; + volatile fec_t *fecp; + bd_t *bd; + + bd = (bd_t *) __res; + immap = (immap_t *) IMAP_ADDR; /* pointer to internal registers */ + fecp = &(immap->im_cpm.cp_fec); + + /* Enable MII pins of the FEC1 + */ + setbits16(&immap->im_ioport.iop_pdpar, 0x0080); + clrbits16(&immap->im_ioport.iop_pddir, 0x0080); + /* Set MII speed to 2.5 MHz + */ + out_be32(&fecp->fec_mii_speed, + ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1); + + /* Enable FEC pin MUX + */ + setbits32(&fecp->fec_ecntrl, MII_ECNTRL_PINMUX); + setbits32(&fecp->fec_r_cntrl, FEC_RCNTRL_MII_MODE); + + out_be32(&fecp->fec_mii_data, + mk_mii_write(MII_BMCR, BMCR_ISOLATE, phy_addr)); + udelay(100); + out_be32(&fecp->fec_mii_data, + mk_mii_write(MII_ADVERTISE, + ADVERTISE_10HALF | ADVERTISE_CSMA, phy_addr)); + udelay(100); + + /* Disable FEC MII settings + */ + clrbits32(&fecp->fec_ecntrl, MII_ECNTRL_PINMUX); + clrbits32(&fecp->fec_r_cntrl, FEC_RCNTRL_MII_MODE); + out_be32(&fecp->fec_mii_speed, 0); +} + +static int mpc885ads_platform_notify(struct device *dev) +{ + + static const struct platform_notify_dev_map dev_map[] = { + { + .bus_id = "fsl-cpm-fec", + .rtn = mpc885ads_fixup_fec_enet_pdata, + }, + { + .bus_id = "fsl-cpm-scc", + .rtn = mpc885ads_fixup_scc_enet_pdata, + }, + { + .bus_id = NULL + } + }; + + platform_notify_map(dev_map,dev); + +} + +int __init mpc885ads_init(void) +{ + printk(KERN_NOTICE "mpc885ads: Init\n"); + + platform_notify = mpc885ads_platform_notify; + + ppc_sys_device_initfunc(); + ppc_sys_device_disable_all(); + + ppc_sys_device_enable(MPC8xx_CPM_FEC1); + +#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3 + ppc_sys_device_enable(MPC8xx_CPM_SCC1); + +#endif +#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2 + ppc_sys_device_enable(MPC8xx_CPM_FEC2); +#endif + + return 0; +} + +arch_initcall(mpc885ads_init); diff --git a/arch/ppc/platforms/pq2ads.h b/arch/ppc/platforms/pq2ads.h index 067d9a5aebc..6b26dd36c64 100644 --- a/arch/ppc/platforms/pq2ads.h +++ b/arch/ppc/platforms/pq2ads.h @@ -13,6 +13,10 @@ #include +#if defined(CONFIG_ADS8272) +#define BOARD_CHIP_NAME "8272" +#endif + /* Memory map is configured by the PROM startup. * We just map a few things we need. The CSR is actually 4 byte-wide * registers that can be accessed as 8-, 16-, or 32-bit values. diff --git a/arch/ppc/platforms/pq2ads_pd.h b/arch/ppc/platforms/pq2ads_pd.h new file mode 100644 index 00000000000..8f14a43eafe --- /dev/null +++ b/arch/ppc/platforms/pq2ads_pd.h @@ -0,0 +1,114 @@ +#ifndef __PQ2ADS_PD_H +#define __PQ2ADS_PD_H +/* + * arch/ppc/platforms/82xx/pq2ads_pd.h + * + * Some defines for MPC82xx board-specific PlatformDevice descriptions + * + * 2005 (c) MontaVista Software, Inc. + * Vitaly Bordug + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/* FCC1 Clock Source Configuration. These can be redefined in the board specific file. + Can only choose from CLK9-12 */ + +#define F1_RXCLK 11 +#define F1_TXCLK 10 + +/* FCC2 Clock Source Configuration. These can be redefined in the board specific file. + Can only choose from CLK13-16 */ +#define F2_RXCLK 15 +#define F2_TXCLK 16 + +/* FCC3 Clock Source Configuration. These can be redefined in the board specific file. + Can only choose from CLK13-16 */ +#define F3_RXCLK 13 +#define F3_TXCLK 14 + +/* Automatically generates register configurations */ +#define PC_CLK(x) ((uint)(1<<(x-1))) /* FCC CLK I/O ports */ + +#define CMXFCR_RF1CS(x) ((uint)((x-5)<<27)) /* FCC1 Receive Clock Source */ +#define CMXFCR_TF1CS(x) ((uint)((x-5)<<24)) /* FCC1 Transmit Clock Source */ +#define CMXFCR_RF2CS(x) ((uint)((x-9)<<19)) /* FCC2 Receive Clock Source */ +#define CMXFCR_TF2CS(x) ((uint)((x-9)<<16)) /* FCC2 Transmit Clock Source */ +#define CMXFCR_RF3CS(x) ((uint)((x-9)<<11)) /* FCC3 Receive Clock Source */ +#define CMXFCR_TF3CS(x) ((uint)((x-9)<<8)) /* FCC3 Transmit Clock Source */ + +#define PC_F1RXCLK PC_CLK(F1_RXCLK) +#define PC_F1TXCLK PC_CLK(F1_TXCLK) +#define CMX1_CLK_ROUTE (CMXFCR_RF1CS(F1_RXCLK) | CMXFCR_TF1CS(F1_TXCLK)) +#define CMX1_CLK_MASK ((uint)0xff000000) + +#define PC_F2RXCLK PC_CLK(F2_RXCLK) +#define PC_F2TXCLK PC_CLK(F2_TXCLK) +#define CMX2_CLK_ROUTE (CMXFCR_RF2CS(F2_RXCLK) | CMXFCR_TF2CS(F2_TXCLK)) +#define CMX2_CLK_MASK ((uint)0x00ff0000) + +#define PC_F3RXCLK PC_CLK(F3_RXCLK) +#define PC_F3TXCLK PC_CLK(F3_TXCLK) +#define CMX3_CLK_ROUTE (CMXFCR_RF3CS(F3_RXCLK) | CMXFCR_TF3CS(F3_TXCLK)) +#define CMX3_CLK_MASK ((uint)0x0000ff00) + +/* I/O Pin assignment for FCC1. I don't yet know the best way to do this, + * but there is little variation among the choices. + */ +#define PA1_COL 0x00000001U +#define PA1_CRS 0x00000002U +#define PA1_TXER 0x00000004U +#define PA1_TXEN 0x00000008U +#define PA1_RXDV 0x00000010U +#define PA1_RXER 0x00000020U +#define PA1_TXDAT 0x00003c00U +#define PA1_RXDAT 0x0003c000U +#define PA1_PSORA0 (PA1_RXDAT | PA1_TXDAT) +#define PA1_PSORA1 (PA1_COL | PA1_CRS | PA1_TXER | PA1_TXEN | \ + PA1_RXDV | PA1_RXER) +#define PA1_DIRA0 (PA1_RXDAT | PA1_CRS | PA1_COL | PA1_RXER | PA1_RXDV) +#define PA1_DIRA1 (PA1_TXDAT | PA1_TXEN | PA1_TXER) + + +/* I/O Pin assignment for FCC2. I don't yet know the best way to do this, + * but there is little variation among the choices. + */ +#define PB2_TXER 0x00000001U +#define PB2_RXDV 0x00000002U +#define PB2_TXEN 0x00000004U +#define PB2_RXER 0x00000008U +#define PB2_COL 0x00000010U +#define PB2_CRS 0x00000020U +#define PB2_TXDAT 0x000003c0U +#define PB2_RXDAT 0x00003c00U +#define PB2_PSORB0 (PB2_RXDAT | PB2_TXDAT | PB2_CRS | PB2_COL | \ + PB2_RXER | PB2_RXDV | PB2_TXER) +#define PB2_PSORB1 (PB2_TXEN) +#define PB2_DIRB0 (PB2_RXDAT | PB2_CRS | PB2_COL | PB2_RXER | PB2_RXDV) +#define PB2_DIRB1 (PB2_TXDAT | PB2_TXEN | PB2_TXER) + + +/* I/O Pin assignment for FCC3. I don't yet know the best way to do this, + * but there is little variation among the choices. + */ +#define PB3_RXDV 0x00004000U +#define PB3_RXER 0x00008000U +#define PB3_TXER 0x00010000U +#define PB3_TXEN 0x00020000U +#define PB3_COL 0x00040000U +#define PB3_CRS 0x00080000U +#define PB3_TXDAT 0x0f000000U +#define PB3_RXDAT 0x00f00000U +#define PB3_PSORB0 (PB3_RXDAT | PB3_TXDAT | PB3_CRS | PB3_COL | \ + PB3_RXER | PB3_RXDV | PB3_TXER | PB3_TXEN) +#define PB3_PSORB1 0 +#define PB3_DIRB0 (PB3_RXDAT | PB3_CRS | PB3_COL | PB3_RXER | PB3_RXDV) +#define PB3_DIRB1 (PB3_TXDAT | PB3_TXEN | PB3_TXER) + +#define FCC_MEM_OFFSET(x) (CPM_FCC_SPECIAL_BASE + (x*128)) +#define FCC1_MEM_OFFSET FCC_MEM_OFFSET(0) +#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(1) + +#endif -- cgit v1.2.3-18-g5258 From d2515c806ea2b602e99b9aa19448577c7f0318fb Mon Sep 17 00:00:00 2001 From: Olaf Hering Date: Sun, 22 Jan 2006 22:19:02 +0100 Subject: [PATCH] powerpc: cleanup pmac_newworld variable usage remove extern declarations of pmac_newworld move pmac_newworld to bss if there is any "interrupt-controller" device, then it is newworld. Signed-off-by: Olaf Hering Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/ppc_ksyms.c | 1 - arch/powerpc/platforms/powermac/setup.c | 8 ++++---- 2 files changed, 4 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index d9a459c144d..b212d3e64b8 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -57,7 +57,6 @@ extern void machine_check_exception(struct pt_regs *regs); extern void alignment_exception(struct pt_regs *regs); extern void program_check_exception(struct pt_regs *regs); extern void single_step_exception(struct pt_regs *regs); -extern int pmac_newworld; extern int sys_sigreturn(struct pt_regs *regs); EXPORT_SYMBOL(clear_pages); diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 89c4c363616..616b1e3ebe0 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -88,11 +88,10 @@ int ppc_override_l2cr = 0; int ppc_override_l2cr_value; int has_l2cache = 0; -int pmac_newworld = 1; +int pmac_newworld; static int current_root_goodness = -1; -extern int pmac_newworld; extern struct machdep_calls pmac_md; #define DEFAULT_ROOT_DEVICE Root_SDA1 /* sda1 - slightly silly choice */ @@ -310,9 +309,10 @@ static void __init pmac_setup_arch(void) for (ic = NULL; (ic = of_find_all_nodes(ic)) != NULL; ) if (get_property(ic, "interrupt-controller", NULL)) break; - pmac_newworld = (ic != NULL); - if (ic) + if (ic) { + pmac_newworld = 1; of_node_put(ic); + } /* Lookup PCI hosts */ pmac_pci_init(); -- cgit v1.2.3-18-g5258 From 2fb07d776b3c4473275eb225b6bf2a83755c9bfe Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Mon, 23 Jan 2006 16:58:04 -0600 Subject: [PATCH] powerpc: cleaned up fsl_soc.c Cleaned up fsl_soc.c based on comments from Olof Johansson. Ran through Lindent, and split gfar_mdio init into its own function. Signed-off-by: Kumar Gala Signed-off-by: Paul Mackerras --- arch/powerpc/sysdev/fsl_soc.c | 152 ++++++++++++++++++++++++++---------------- 1 file changed, 94 insertions(+), 58 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 064c9de4773..e0887d5c3bb 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -40,7 +40,7 @@ phys_addr_t get_immrbase(void) return immrbase; soc = of_find_node_by_type(NULL, "soc"); - if (soc != 0) { + if (soc) { unsigned int size; void *prop = get_property(soc, "reg", &size); immrbase = of_translate_address(soc, prop); @@ -49,21 +49,20 @@ phys_addr_t get_immrbase(void) return immrbase; } -EXPORT_SYMBOL(get_immrbase); -static const char * gfar_tx_intr = "tx"; -static const char * gfar_rx_intr = "rx"; -static const char * gfar_err_intr = "error"; +EXPORT_SYMBOL(get_immrbase); -static int __init gfar_of_init(void) +static int __init gfar_mdio_of_init(void) { struct device_node *np; unsigned int i; - struct platform_device *mdio_dev, *gfar_dev; + struct platform_device *mdio_dev; struct resource res; int ret; - for (np = NULL, i = 0; (np = of_find_compatible_node(np, "mdio", "gianfar")) != NULL; i++) { + for (np = NULL, i = 0; + (np = of_find_compatible_node(np, "mdio", "gianfar")) != NULL; + i++) { int k; struct device_node *child = NULL; struct gianfar_mdio_data mdio_data; @@ -73,12 +72,14 @@ static int __init gfar_of_init(void) ret = of_address_to_resource(np, 0, &res); if (ret) - goto mdio_err; + goto err; - mdio_dev = platform_device_register_simple("fsl-gianfar_mdio", res.start, &res, 1); + mdio_dev = + platform_device_register_simple("fsl-gianfar_mdio", + res.start, &res, 1); if (IS_ERR(mdio_dev)) { ret = PTR_ERR(mdio_dev); - goto mdio_err; + goto err; } for (k = 0; k < 32; k++) @@ -86,17 +87,44 @@ static int __init gfar_of_init(void) while ((child = of_get_next_child(np, child)) != NULL) { if (child->n_intrs) { - u32 *id = (u32 *) get_property(child, "reg", NULL); + u32 *id = + (u32 *) get_property(child, "reg", NULL); mdio_data.irq[*id] = child->intrs[0].line; } } - ret = platform_device_add_data(mdio_dev, &mdio_data, sizeof(struct gianfar_mdio_data)); + ret = + platform_device_add_data(mdio_dev, &mdio_data, + sizeof(struct gianfar_mdio_data)); if (ret) - goto mdio_unreg; + goto unreg; } - for (np = NULL, i = 0; (np = of_find_compatible_node(np, "network", "gianfar")) != NULL; i++) { + return 0; + +unreg: + platform_device_unregister(mdio_dev); +err: + return ret; +} + +arch_initcall(gfar_mdio_of_init); + +static const char *gfar_tx_intr = "tx"; +static const char *gfar_rx_intr = "rx"; +static const char *gfar_err_intr = "error"; + +static int __init gfar_of_init(void) +{ + struct device_node *np; + unsigned int i; + struct platform_device *gfar_dev; + struct resource res; + int ret; + + for (np = NULL, i = 0; + (np = of_find_compatible_node(np, "network", "gianfar")) != NULL; + i++) { struct resource r[4]; struct device_node *phy, *mdio; struct gianfar_platform_data gfar_data; @@ -110,7 +138,7 @@ static int __init gfar_of_init(void) ret = of_address_to_resource(np, 0, &r[0]); if (ret) - goto gfar_err; + goto err; r[1].start = np->intrs[0].line; r[1].end = np->intrs[0].line; @@ -133,11 +161,13 @@ static int __init gfar_of_init(void) r[3].flags = IORESOURCE_IRQ; } - gfar_dev = platform_device_register_simple("fsl-gianfar", i, &r[0], np->n_intrs + 1); + gfar_dev = + platform_device_register_simple("fsl-gianfar", i, &r[0], + np->n_intrs + 1); if (IS_ERR(gfar_dev)) { ret = PTR_ERR(gfar_dev); - goto gfar_err; + goto err; } mac_addr = get_property(np, "address", NULL); @@ -145,26 +175,26 @@ static int __init gfar_of_init(void) if (model && !strcasecmp(model, "TSEC")) gfar_data.device_flags = - FSL_GIANFAR_DEV_HAS_GIGABIT | - FSL_GIANFAR_DEV_HAS_COALESCE | - FSL_GIANFAR_DEV_HAS_RMON | - FSL_GIANFAR_DEV_HAS_MULTI_INTR; + FSL_GIANFAR_DEV_HAS_GIGABIT | + FSL_GIANFAR_DEV_HAS_COALESCE | + FSL_GIANFAR_DEV_HAS_RMON | + FSL_GIANFAR_DEV_HAS_MULTI_INTR; if (model && !strcasecmp(model, "eTSEC")) gfar_data.device_flags = - FSL_GIANFAR_DEV_HAS_GIGABIT | - FSL_GIANFAR_DEV_HAS_COALESCE | - FSL_GIANFAR_DEV_HAS_RMON | - FSL_GIANFAR_DEV_HAS_MULTI_INTR | - FSL_GIANFAR_DEV_HAS_CSUM | - FSL_GIANFAR_DEV_HAS_VLAN | - FSL_GIANFAR_DEV_HAS_EXTENDED_HASH; + FSL_GIANFAR_DEV_HAS_GIGABIT | + FSL_GIANFAR_DEV_HAS_COALESCE | + FSL_GIANFAR_DEV_HAS_RMON | + FSL_GIANFAR_DEV_HAS_MULTI_INTR | + FSL_GIANFAR_DEV_HAS_CSUM | + FSL_GIANFAR_DEV_HAS_VLAN | + FSL_GIANFAR_DEV_HAS_EXTENDED_HASH; ph = (phandle *) get_property(np, "phy-handle", NULL); phy = of_find_node_by_phandle(*ph); if (phy == NULL) { ret = -ENODEV; - goto gfar_unreg; + goto unreg; } mdio = of_get_parent(phy); @@ -174,7 +204,7 @@ static int __init gfar_of_init(void) if (ret) { of_node_put(phy); of_node_put(mdio); - goto gfar_unreg; + goto unreg; } gfar_data.phy_id = *id; @@ -183,23 +213,22 @@ static int __init gfar_of_init(void) of_node_put(phy); of_node_put(mdio); - ret = platform_device_add_data(gfar_dev, &gfar_data, sizeof(struct gianfar_platform_data)); + ret = + platform_device_add_data(gfar_dev, &gfar_data, + sizeof(struct + gianfar_platform_data)); if (ret) - goto gfar_unreg; + goto unreg; } return 0; -mdio_unreg: - platform_device_unregister(mdio_dev); -mdio_err: - return ret; - -gfar_unreg: +unreg: platform_device_unregister(gfar_dev); -gfar_err: +err: return ret; } + arch_initcall(gfar_of_init); static int __init fsl_i2c_of_init(void) @@ -209,17 +238,19 @@ static int __init fsl_i2c_of_init(void) struct platform_device *i2c_dev; int ret; - for (np = NULL, i = 0; (np = of_find_compatible_node(np, "i2c", "fsl-i2c")) != NULL; i++) { + for (np = NULL, i = 0; + (np = of_find_compatible_node(np, "i2c", "fsl-i2c")) != NULL; + i++) { struct resource r[2]; struct fsl_i2c_platform_data i2c_data; - unsigned char * flags = NULL; + unsigned char *flags = NULL; memset(&r, 0, sizeof(r)); memset(&i2c_data, 0, sizeof(i2c_data)); ret = of_address_to_resource(np, 0, &r[0]); if (ret) - goto i2c_err; + goto err; r[1].start = np->intrs[0].line; r[1].end = np->intrs[0].line; @@ -228,7 +259,7 @@ static int __init fsl_i2c_of_init(void) i2c_dev = platform_device_register_simple("fsl-i2c", i, r, 2); if (IS_ERR(i2c_dev)) { ret = PTR_ERR(i2c_dev); - goto i2c_err; + goto err; } i2c_data.device_flags = 0; @@ -240,18 +271,22 @@ static int __init fsl_i2c_of_init(void) if (flags) i2c_data.device_flags |= FSL_I2C_DEV_CLOCK_5200; - ret = platform_device_add_data(i2c_dev, &i2c_data, sizeof(struct fsl_i2c_platform_data)); + ret = + platform_device_add_data(i2c_dev, &i2c_data, + sizeof(struct + fsl_i2c_platform_data)); if (ret) - goto i2c_unreg; + goto unreg; } return 0; -i2c_unreg: +unreg: platform_device_unregister(i2c_dev); -i2c_err: +err: return ret; } + arch_initcall(fsl_i2c_of_init); #ifdef CONFIG_PPC_83xx @@ -267,51 +302,52 @@ static int __init mpc83xx_wdt_init(void) if (!np) { ret = -ENODEV; - goto mpc83xx_wdt_nodev; + goto nodev; } soc = of_find_node_by_type(NULL, "soc"); if (!soc) { ret = -ENODEV; - goto mpc83xx_wdt_nosoc; + goto nosoc; } freq = (unsigned int *)get_property(soc, "bus-frequency", NULL); if (!freq) { ret = -ENODEV; - goto mpc83xx_wdt_err; + goto err; } memset(&r, 0, sizeof(r)); ret = of_address_to_resource(np, 0, &r); if (ret) - goto mpc83xx_wdt_err; + goto err; dev = platform_device_register_simple("mpc83xx_wdt", 0, &r, 1); if (IS_ERR(dev)) { ret = PTR_ERR(dev); - goto mpc83xx_wdt_err; + goto err; } ret = platform_device_add_data(dev, freq, sizeof(int)); if (ret) - goto mpc83xx_wdt_unreg; + goto unreg; of_node_put(soc); of_node_put(np); return 0; -mpc83xx_wdt_unreg: +unreg: platform_device_unregister(dev); -mpc83xx_wdt_err: +err: of_node_put(soc); -mpc83xx_wdt_nosoc: +nosoc: of_node_put(np); -mpc83xx_wdt_nodev: +nodev: return ret; } + arch_initcall(mpc83xx_wdt_init); #endif -- cgit v1.2.3-18-g5258 From d7a5b2ffa1352f0310630934a56aecbdfb617b72 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 25 Jan 2006 21:31:28 +1300 Subject: [PATCH] powerpc: Always panic if lmb_alloc() fails Currently most callers of lmb_alloc() don't check if it worked or not, if it ever does weird bad things will probably happen. The few callers who do check just panic or BUG_ON. So make lmb_alloc() panic internally, to catch bugs at the source. The few callers who did check the result no longer need to. The only caller that did anything interesting with the return result was careful_allocation(). For it we create __lmb_alloc_base() which _doesn't_ panic automatically, a little messy, but passable. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/prom.c | 4 ---- arch/powerpc/mm/hash_utils_64.c | 1 - arch/powerpc/mm/lmb.c | 14 ++++++++++++++ arch/powerpc/mm/mem.c | 1 - arch/powerpc/mm/numa.c | 4 ++-- arch/powerpc/mm/stab.c | 4 ---- arch/powerpc/sysdev/dart_iommu.c | 2 -- 7 files changed, 16 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 294832a7e0a..82d117c60d7 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -831,10 +831,6 @@ void __init unflatten_device_tree(void) /* Allocate memory for the expanded device tree */ mem = lmb_alloc(size + 4, __alignof__(struct device_node)); - if (!mem) { - DBG("Couldn't allocate memory with lmb_alloc()!\n"); - panic("Couldn't allocate memory with lmb_alloc()!\n"); - } mem = (unsigned long) __va(mem); ((u32 *)mem)[size / 4] = 0xdeadbeef; diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 149351a84b9..95b4cd6b65e 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -430,7 +430,6 @@ void __init htab_initialize(void) * the absolute address space. */ table = lmb_alloc(htab_size_bytes, htab_size_bytes); - BUG_ON(table == 0); DBG("Hash table allocated at %lx, size: %lx\n", table, htab_size_bytes); diff --git a/arch/powerpc/mm/lmb.c b/arch/powerpc/mm/lmb.c index bbe3eac918e..d9c76ce5fa8 100644 --- a/arch/powerpc/mm/lmb.c +++ b/arch/powerpc/mm/lmb.c @@ -225,6 +225,20 @@ unsigned long __init lmb_alloc(unsigned long size, unsigned long align) unsigned long __init lmb_alloc_base(unsigned long size, unsigned long align, unsigned long max_addr) +{ + unsigned long alloc; + + alloc = __lmb_alloc_base(size, align, max_addr); + + if (alloc < 0) + panic("ERROR: Failed to allocate 0x%lx bytes below 0x%lx.\n", + size, max_addr); + + return alloc; +} + +unsigned long __init __lmb_alloc_base(unsigned long size, unsigned long align, + unsigned long max_addr) { long i, j; unsigned long base = 0; diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 550517c2dd4..6809cdba6e9 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -249,7 +249,6 @@ void __init do_init_bootmem(void) bootmap_pages = bootmem_bootmap_pages(total_pages); start = lmb_alloc(bootmap_pages << PAGE_SHIFT, PAGE_SIZE); - BUG_ON(!start); boot_mapsize = init_bootmem(start >> PAGE_SHIFT, total_pages); diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 2863a912bcd..da5280f8cf4 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -570,11 +570,11 @@ static void __init *careful_allocation(int nid, unsigned long size, unsigned long end_pfn) { int new_nid; - unsigned long ret = lmb_alloc_base(size, align, end_pfn << PAGE_SHIFT); + unsigned long ret = __lmb_alloc_base(size, align, end_pfn << PAGE_SHIFT); /* retry over all memory */ if (!ret) - ret = lmb_alloc_base(size, align, lmb_end_of_DRAM()); + ret = __lmb_alloc_base(size, align, lmb_end_of_DRAM()); if (!ret) panic("numa.c: cannot allocate %lu bytes on node %d", diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c index 82e4951826b..91d25fb27f8 100644 --- a/arch/powerpc/mm/stab.c +++ b/arch/powerpc/mm/stab.c @@ -247,10 +247,6 @@ void stabs_alloc(void) newstab = lmb_alloc_base(HW_PAGE_SIZE, HW_PAGE_SIZE, 1<> DART_PAGE_SHIFT) & DARTMAP_RPNMASK); -- cgit v1.2.3-18-g5258 From 3b9331dac16555e8788ae21723f2146c3f994ebb Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 25 Jan 2006 21:31:30 +1300 Subject: [PATCH] powerpc: Move LMB_ALLOC_ANYWHERE out of lmb.h LMB_ALLOC_ANYWHERE doesn't need to be part of the API, it's only used in lmb.c - so move it out of the header file. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/mm/lmb.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/mm/lmb.c b/arch/powerpc/mm/lmb.c index d9c76ce5fa8..874cd103ce6 100644 --- a/arch/powerpc/mm/lmb.c +++ b/arch/powerpc/mm/lmb.c @@ -31,6 +31,8 @@ #define DBG(fmt...) #endif +#define LMB_ALLOC_ANYWHERE 0 + struct lmb lmb; void lmb_dump_all(void) -- cgit v1.2.3-18-g5258 From 155da5ff5798c46d941a836e0775f83ed888e73e Mon Sep 17 00:00:00 2001 From: Domen Puncer Date: Thu, 26 Jan 2006 13:50:01 +0300 Subject: [PATCH] powerpc: Remove arch/ppc/syslib/ppc4xx_pm.c Remove nowhere referenced file ("grep ppc4xx_pm -r ." didn't find anything). Signed-off-by: Domen Puncer Signed-off-by: Alexey Dobriyan Signed-off-by: Paul Mackerras --- arch/ppc/syslib/ppc4xx_pm.c | 47 --------------------------------------------- 1 file changed, 47 deletions(-) delete mode 100644 arch/ppc/syslib/ppc4xx_pm.c (limited to 'arch') diff --git a/arch/ppc/syslib/ppc4xx_pm.c b/arch/ppc/syslib/ppc4xx_pm.c deleted file mode 100644 index 60a47920488..00000000000 --- a/arch/ppc/syslib/ppc4xx_pm.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Author: Armin Kuster - * - * 2002 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * This an attempt to get Power Management going for the IBM 4xx processor. - * This was derived from the ppc4xx._setup.c file - */ - -#include -#include - -#include - -void __init -ppc4xx_pm_init(void) -{ - - unsigned int value = 0; - - /* turn off unused hardware to save power */ -#ifdef CONFIG_405GP - value |= CPM_DCP; /* CodePack */ -#endif - -#if !defined(CONFIG_IBM_OCP_GPIO) - value |= CPM_GPIO0; -#endif - -#if !defined(CONFIG_PPC405_I2C_ADAP) - value |= CPM_IIC0; -#ifdef CONFIG_STB03xxx - value |= CPM_IIC1; -#endif -#endif - - -#if !defined(CONFIG_405_DMA) - value |= CPM_DMA; -#endif - - mtdcr(DCRN_CPMFR, value); - -} -- cgit v1.2.3-18-g5258 From 158daa4cc827bda9f7206279a1dc55de2cb9c902 Mon Sep 17 00:00:00 2001 From: Olaf Hering Date: Mon, 30 Jan 2006 14:28:03 +0100 Subject: [PATCH] powerpc: remove check for ELF offset in powerpc bootimage Do not check for offset, it is always set. Signed-off-by: Olaf Hering Signed-off-by: Paul Mackerras --- arch/powerpc/boot/main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/main.c b/arch/powerpc/boot/main.c index 55ec5986725..816446f0e49 100644 --- a/arch/powerpc/boot/main.c +++ b/arch/powerpc/boot/main.c @@ -152,7 +152,7 @@ static int is_elf64(void *hdr) elf64ph = (Elf64_Phdr *)((unsigned long)elf64 + (unsigned long)elf64->e_phoff); for (i = 0; i < (unsigned int)elf64->e_phnum; i++, elf64ph++) - if (elf64ph->p_type == PT_LOAD && elf64ph->p_offset != 0) + if (elf64ph->p_type == PT_LOAD) break; if (i >= (unsigned int)elf64->e_phnum) return 0; @@ -193,7 +193,7 @@ static int is_elf32(void *hdr) elf32 = (Elf32_Ehdr *)elfheader; elf32ph = (Elf32_Phdr *) ((unsigned long)elf32 + elf32->e_phoff); for (i = 0; i < elf32->e_phnum; i++, elf32ph++) - if (elf32ph->p_type == PT_LOAD && elf32ph->p_offset != 0) + if (elf32ph->p_type == PT_LOAD) break; if (i >= elf32->e_phnum) return 0; -- cgit v1.2.3-18-g5258 From 4b10cfd40e3fa1c1663b9c9fa22260d41e669c6f Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 2 Feb 2006 12:31:00 -0600 Subject: [PATCH] powerpc: Add platform support for MPC834x USB controllers Setup the platform devices needed by the Freescale EHCI USB host controllers based on a flat device tree Signed-off-by: Kumar Gala Signed-off-by: Paul Mackerras --- arch/powerpc/sysdev/fsl_soc.c | 140 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 140 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index e0887d5c3bb..ceb584682fa 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -351,3 +351,143 @@ nodev: arch_initcall(mpc83xx_wdt_init); #endif + +static enum fsl_usb2_phy_modes determine_usb_phy(char * phy_type) +{ + if (!phy_type) + return FSL_USB2_PHY_NONE; + if (!strcasecmp(phy_type, "ulpi")) + return FSL_USB2_PHY_ULPI; + if (!strcasecmp(phy_type, "utmi")) + return FSL_USB2_PHY_UTMI; + if (!strcasecmp(phy_type, "utmi_wide")) + return FSL_USB2_PHY_UTMI_WIDE; + if (!strcasecmp(phy_type, "serial")) + return FSL_USB2_PHY_SERIAL; + + return FSL_USB2_PHY_NONE; +} + +static int __init fsl_usb_of_init(void) +{ + struct device_node *np; + unsigned int i; + struct platform_device *usb_dev; + int ret; + + for (np = NULL, i = 0; + (np = of_find_compatible_node(np, "usb", "fsl-usb2-mph")) != NULL; + i++) { + struct resource r[2]; + struct fsl_usb2_platform_data usb_data; + unsigned char *prop = NULL; + + memset(&r, 0, sizeof(r)); + memset(&usb_data, 0, sizeof(usb_data)); + + ret = of_address_to_resource(np, 0, &r[0]); + if (ret) + goto err; + + r[1].start = np->intrs[0].line; + r[1].end = np->intrs[0].line; + r[1].flags = IORESOURCE_IRQ; + + usb_dev = + platform_device_register_simple("fsl-usb2-mph", i, r, 2); + if (IS_ERR(usb_dev)) { + ret = PTR_ERR(usb_dev); + goto err; + } + + usb_dev->dev.coherent_dma_mask = 0xffffffffUL; + usb_dev->dev.dma_mask = &usb_dev->dev.coherent_dma_mask; + + usb_data.operating_mode = FSL_USB2_MPH_HOST; + + prop = get_property(np, "port0", NULL); + if (prop) + usb_data.port_enables |= FSL_USB2_PORT0_ENABLED; + + prop = get_property(np, "port1", NULL); + if (prop) + usb_data.port_enables |= FSL_USB2_PORT1_ENABLED; + + prop = get_property(np, "phy_type", NULL); + usb_data.phy_mode = determine_usb_phy(prop); + + ret = + platform_device_add_data(usb_dev, &usb_data, + sizeof(struct + fsl_usb2_platform_data)); + if (ret) + goto unreg; + } + + return 0; + +unreg: + platform_device_unregister(usb_dev); +err: + return ret; +} + +arch_initcall(fsl_usb_of_init); + +static int __init fsl_usb_dr_of_init(void) +{ + struct device_node *np; + unsigned int i; + struct platform_device *usb_dev; + int ret; + + for (np = NULL, i = 0; + (np = of_find_compatible_node(np, "usb", "fsl-usb2-dr")) != NULL; + i++) { + struct resource r[2]; + struct fsl_usb2_platform_data usb_data; + unsigned char *prop = NULL; + + memset(&r, 0, sizeof(r)); + memset(&usb_data, 0, sizeof(usb_data)); + + ret = of_address_to_resource(np, 0, &r[0]); + if (ret) + goto err; + + r[1].start = np->intrs[0].line; + r[1].end = np->intrs[0].line; + r[1].flags = IORESOURCE_IRQ; + + usb_dev = + platform_device_register_simple("fsl-usb2-dr", i, r, 2); + if (IS_ERR(usb_dev)) { + ret = PTR_ERR(usb_dev); + goto err; + } + + usb_dev->dev.coherent_dma_mask = 0xffffffffUL; + usb_dev->dev.dma_mask = &usb_dev->dev.coherent_dma_mask; + + usb_data.operating_mode = FSL_USB2_DR_HOST; + + prop = get_property(np, "phy_type", NULL); + usb_data.phy_mode = determine_usb_phy(prop); + + ret = + platform_device_add_data(usb_dev, &usb_data, + sizeof(struct + fsl_usb2_platform_data)); + if (ret) + goto unreg; + } + + return 0; + +unreg: + platform_device_unregister(usb_dev); +err: + return ret; +} + +arch_initcall(fsl_usb_dr_of_init); -- cgit v1.2.3-18-g5258 From 30f5933657d17fbbc743ce9522543ba50ce2e834 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 2 Feb 2006 13:50:44 -0600 Subject: [PATCH] powerpc: Cleanup MPC83xx platform support Moved some code around so its usable by more systems than just the MPC834x SYS. Signed-off-by: Kumar Gala Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/83xx/Makefile | 4 ++- arch/powerpc/platforms/83xx/misc.c | 55 +++++++++++++++++++++++++++++ arch/powerpc/platforms/83xx/mpc834x_sys.c | 58 ------------------------------- arch/powerpc/platforms/83xx/mpc83xx.h | 3 ++ arch/powerpc/platforms/83xx/pci.c | 13 +++++-- 5 files changed, 71 insertions(+), 62 deletions(-) create mode 100644 arch/powerpc/platforms/83xx/misc.c (limited to 'arch') diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile index 9d8b28ef334..5c72367441a 100644 --- a/arch/powerpc/platforms/83xx/Makefile +++ b/arch/powerpc/platforms/83xx/Makefile @@ -1,4 +1,6 @@ # # Makefile for the PowerPC 83xx linux kernel. # -obj-$(CONFIG_MPC834x_SYS) += mpc834x_sys.o pci.o +obj-y := misc.o +obj-$(CONFIG_PCI) += pci.o +obj-$(CONFIG_MPC834x_SYS) += mpc834x_sys.o diff --git a/arch/powerpc/platforms/83xx/misc.c b/arch/powerpc/platforms/83xx/misc.c new file mode 100644 index 00000000000..0eb3d99f1b9 --- /dev/null +++ b/arch/powerpc/platforms/83xx/misc.c @@ -0,0 +1,55 @@ +/* + * misc setup functions for MPC83xx + * + * Maintainer: Kumar Gala + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include + +#include +#include +#include + +#include "mpc83xx.h" + +void mpc83xx_restart(char *cmd) +{ +#define RST_OFFSET 0x00000900 +#define RST_PROT_REG 0x00000018 +#define RST_CTRL_REG 0x0000001c + __be32 __iomem *reg; + + /* map reset register space */ + reg = ioremap(get_immrbase() + 0x900, 0xff); + + local_irq_disable(); + + /* enable software reset "RSTE" */ + out_be32(reg + (RST_PROT_REG >> 2), 0x52535445); + + /* set software hard reset */ + out_be32(reg + (RST_CTRL_REG >> 2), 0x52535445); + for (;;) ; +} + +long __init mpc83xx_time_init(void) +{ +#define SPCR_OFFSET 0x00000110 +#define SPCR_TBEN 0x00400000 + __be32 __iomem *spcr = ioremap(get_immrbase() + SPCR_OFFSET, 4); + __be32 tmp; + + tmp = in_be32(spcr); + out_be32(spcr, tmp | SPCR_TBEN); + + iounmap(spcr); + + return 0; +} diff --git a/arch/powerpc/platforms/83xx/mpc834x_sys.c b/arch/powerpc/platforms/83xx/mpc834x_sys.c index 2098dd05a77..7d5a27829bc 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_sys.c +++ b/arch/powerpc/platforms/83xx/mpc834x_sys.c @@ -24,22 +24,15 @@ #include #include #include -#include -#include #include -#include -#include #include #include #include #include #include #include -#include -#include #include -#include #include #include #include @@ -52,8 +45,6 @@ unsigned long isa_mem_base = 0; #endif #ifdef CONFIG_PCI -extern int mpc83xx_pci2_busno; - static int mpc83xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) { @@ -78,17 +69,6 @@ mpc83xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) const long min_idsel = 0x11, max_idsel = 0x20, irqs_per_slot = 4; return PCI_IRQ_TABLE_LOOKUP; } - -static int -mpc83xx_exclude_device(u_char bus, u_char devfn) -{ - if (bus == 0 && PCI_SLOT(devfn) == 0) - return PCIBIOS_DEVICE_NOT_FOUND; - if (mpc83xx_pci2_busno) - if (bus == (mpc83xx_pci2_busno) && PCI_SLOT(devfn) == 0) - return PCIBIOS_DEVICE_NOT_FOUND; - return PCIBIOS_SUCCESSFUL; -} #endif /* CONFIG_PCI */ /* ************************************************************************ @@ -180,42 +160,6 @@ mpc834x_rtc_hookup(void) late_initcall(mpc834x_rtc_hookup); #endif -static void -mpc83xx_restart(char *cmd) -{ -#define RST_OFFSET 0x00000900 -#define RST_PROT_REG 0x00000018 -#define RST_CTRL_REG 0x0000001c - __be32 __iomem *reg; - - // map reset register space - reg = ioremap(get_immrbase() + 0x900, 0xff); - - local_irq_disable(); - - /* enable software reset "RSTE" */ - out_be32(reg + (RST_PROT_REG >> 2), 0x52535445); - - /* set software hard reset */ - out_be32(reg + (RST_CTRL_REG >> 2), 0x52535445); - for(;;); -} - -static long __init -mpc83xx_time_init(void) -{ -#define SPCR_OFFSET 0x00000110 -#define SPCR_TBEN 0x00400000 - __be32 __iomem *spcr = ioremap(get_immrbase() + SPCR_OFFSET, 4); - __be32 tmp; - - tmp = in_be32(spcr); - out_be32(spcr, tmp|SPCR_TBEN); - - iounmap(spcr); - - return 0; -} void __init platform_init(void) { @@ -239,5 +183,3 @@ platform_init(void) return; } - - diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h index ce9e66abef2..228d5c463f7 100644 --- a/arch/powerpc/platforms/83xx/mpc83xx.h +++ b/arch/powerpc/platforms/83xx/mpc83xx.h @@ -10,5 +10,8 @@ */ extern int add_bridge(struct device_node *dev); +extern int mpc83xx_exclude_device(u_char bus, u_char devfn); +extern void mpc83xx_restart(char *cmd); +extern long mpc83xx_time_init(void); #endif /* __MPC83XX_H__ */ diff --git a/arch/powerpc/platforms/83xx/pci.c b/arch/powerpc/platforms/83xx/pci.c index 469cdacc5bd..70e28fcdb38 100644 --- a/arch/powerpc/platforms/83xx/pci.c +++ b/arch/powerpc/platforms/83xx/pci.c @@ -36,7 +36,16 @@ int mpc83xx_pci2_busno; -#ifdef CONFIG_PCI +int mpc83xx_exclude_device(u_char bus, u_char devfn) +{ + if (bus == 0 && PCI_SLOT(devfn) == 0) + return PCIBIOS_DEVICE_NOT_FOUND; + if (mpc83xx_pci2_busno) + if (bus == (mpc83xx_pci2_busno) && PCI_SLOT(devfn) == 0) + return PCIBIOS_DEVICE_NOT_FOUND; + return PCIBIOS_SUCCESSFUL; +} + int __init add_bridge(struct device_node *dev) { int len; @@ -95,5 +104,3 @@ int __init add_bridge(struct device_node *dev) return 0; } - -#endif -- cgit v1.2.3-18-g5258 From e060e084e7d9e1c62d02cb6b8d3fe07db5317eaa Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 2 Feb 2006 13:51:10 -0600 Subject: [PATCH] powerpc: Lindent platforms/83xx Ran arch/powerpc/platforms/83xx through Lindent Signed-off-by: Kumar Gala Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/83xx/mpc834x_sys.c | 31 ++++++++++++++----------------- arch/powerpc/platforms/83xx/mpc834x_sys.h | 2 +- arch/powerpc/platforms/83xx/mpc83xx.h | 2 +- arch/powerpc/platforms/83xx/pci.c | 8 ++++---- 4 files changed, 20 insertions(+), 23 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/83xx/mpc834x_sys.c b/arch/powerpc/platforms/83xx/mpc834x_sys.c index 7d5a27829bc..7c18b4cd5db 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_sys.c +++ b/arch/powerpc/platforms/83xx/mpc834x_sys.c @@ -69,15 +69,14 @@ mpc83xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) const long min_idsel = 0x11, max_idsel = 0x20, irqs_per_slot = 4; return PCI_IRQ_TABLE_LOOKUP; } -#endif /* CONFIG_PCI */ +#endif /* CONFIG_PCI */ /* ************************************************************************ * * Setup the architecture * */ -static void __init -mpc834x_sys_setup_arch(void) +static void __init mpc834x_sys_setup_arch(void) { struct device_node *np; @@ -86,14 +85,14 @@ mpc834x_sys_setup_arch(void) np = of_find_node_by_type(NULL, "cpu"); if (np != 0) { - unsigned int *fp = (int *) get_property(np, "clock-frequency", NULL); + unsigned int *fp = + (int *)get_property(np, "clock-frequency", NULL); if (fp != 0) loops_per_jiffy = *fp / HZ; else loops_per_jiffy = 50000000 / HZ; of_node_put(np); } - #ifdef CONFIG_PCI for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) add_bridge(np); @@ -104,14 +103,13 @@ mpc834x_sys_setup_arch(void) #endif #ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; + ROOT_DEV = Root_NFS; #else - ROOT_DEV = Root_HDA1; + ROOT_DEV = Root_HDA1; #endif } -void __init -mpc834x_sys_init_IRQ(void) +void __init mpc834x_sys_init_IRQ(void) { u8 senses[8] = { 0, /* EXT 0 */ @@ -140,28 +138,27 @@ mpc834x_sys_init_IRQ(void) } #if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374) -extern ulong ds1374_get_rtc_time(void); -extern int ds1374_set_rtc_time(ulong); +extern ulong ds1374_get_rtc_time(void); +extern int ds1374_set_rtc_time(ulong); -static int __init -mpc834x_rtc_hookup(void) +static int __init mpc834x_rtc_hookup(void) { - struct timespec tv; + struct timespec tv; ppc_md.get_rtc_time = ds1374_get_rtc_time; ppc_md.set_rtc_time = ds1374_set_rtc_time; tv.tv_nsec = 0; - tv.tv_sec = (ppc_md.get_rtc_time)(); + tv.tv_sec = (ppc_md.get_rtc_time) (); do_settimeofday(&tv); return 0; } + late_initcall(mpc834x_rtc_hookup); #endif -void __init -platform_init(void) +void __init platform_init(void) { /* setup the PowerPC module struct */ ppc_md.setup_arch = mpc834x_sys_setup_arch; diff --git a/arch/powerpc/platforms/83xx/mpc834x_sys.h b/arch/powerpc/platforms/83xx/mpc834x_sys.h index e4ca39f6a86..fedecb73f7f 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_sys.h +++ b/arch/powerpc/platforms/83xx/mpc834x_sys.h @@ -20,4 +20,4 @@ #define PIRQC MPC83xx_IRQ_EXT6 #define PIRQD MPC83xx_IRQ_EXT7 -#endif /* __MACH_MPC83XX_SYS_H__ */ +#endif /* __MACH_MPC83XX_SYS_H__ */ diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h index 228d5c463f7..01cae106912 100644 --- a/arch/powerpc/platforms/83xx/mpc83xx.h +++ b/arch/powerpc/platforms/83xx/mpc83xx.h @@ -14,4 +14,4 @@ extern int mpc83xx_exclude_device(u_char bus, u_char devfn); extern void mpc83xx_restart(char *cmd); extern long mpc83xx_time_init(void); -#endif /* __MPC83XX_H__ */ +#endif /* __MPC83XX_H__ */ diff --git a/arch/powerpc/platforms/83xx/pci.c b/arch/powerpc/platforms/83xx/pci.c index 70e28fcdb38..16f7d3b30e1 100644 --- a/arch/powerpc/platforms/83xx/pci.c +++ b/arch/powerpc/platforms/83xx/pci.c @@ -61,7 +61,7 @@ int __init add_bridge(struct device_node *dev) has_address = (of_address_to_resource(dev, 0, &rsrc) == 0); /* Get bus range if any */ - bus_range = (int *) get_property(dev, "bus-range", &len); + bus_range = (int *)get_property(dev, "bus-range", &len); if (bus_range == NULL || len < 2 * sizeof(int)) { printk(KERN_WARNING "Can't get bus-range for %s, assume" " bus 0\n", dev->full_name); @@ -83,7 +83,7 @@ int __init add_bridge(struct device_node *dev) if ((rsrc.start & 0xfffff) == 0x8500) { setup_indirect_pci(hose, immr + 0x8300, immr + 0x8304); } - /* PCI 2*/ + /* PCI 2 */ if ((rsrc.start & 0xfffff) == 0x8600) { setup_indirect_pci(hose, immr + 0x8380, immr + 0x8384); primary = 0; @@ -93,10 +93,10 @@ int __init add_bridge(struct device_node *dev) printk(KERN_INFO "Found MPC83xx PCI host bridge at 0x%08lx. " "Firmware bus number: %d->%d\n", - rsrc.start, hose->first_busno, hose->last_busno); + rsrc.start, hose->first_busno, hose->last_busno); DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", - hose, hose->cfg_addr, hose->cfg_data); + hose, hose->cfg_addr, hose->cfg_data); /* Interpret the "ranges" property */ /* This also maps the I/O region and sets isa_io/mem_base */ -- cgit v1.2.3-18-g5258 From dcc1dd2366a7c355fd8b6543c52685b864a2044f Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Tue, 7 Feb 2006 09:24:14 -0800 Subject: [IA64-SGI] - Eliminate SN pio_phys_xxx macros. Move to assembly Rewrite the SN pio_phys_xxx macros in assembly language. This avoids issues with the Intel icc compiler. Function call overhead is not an issue - the functions reference PIOs and take 100's nsec to complete. In addition, the functions should likely be in assembly language anyway - they reference memory using physical addressing mode. One function executes with psr.ic disabled. Signed-off-by: Jack Steiner Signed-off-by: Tony Luck --- arch/ia64/sn/kernel/Makefile | 3 +- arch/ia64/sn/kernel/pio_phys.S | 71 ++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 73 insertions(+), 1 deletion(-) create mode 100644 arch/ia64/sn/kernel/pio_phys.S (limited to 'arch') diff --git a/arch/ia64/sn/kernel/Makefile b/arch/ia64/sn/kernel/Makefile index 3e9b4eea741..ab9c48c8801 100644 --- a/arch/ia64/sn/kernel/Makefile +++ b/arch/ia64/sn/kernel/Makefile @@ -10,7 +10,8 @@ CPPFLAGS += -I$(srctree)/arch/ia64/sn/include obj-y += setup.o bte.o bte_error.o irq.o mca.o idle.o \ - huberror.o io_init.o iomv.o klconflib.o sn2/ + huberror.o io_init.o iomv.o klconflib.o pio_phys.o \ + sn2/ obj-$(CONFIG_IA64_GENERIC) += machvec.o obj-$(CONFIG_SGI_TIOCX) += tiocx.o obj-$(CONFIG_IA64_SGI_SN_XP) += xp.o diff --git a/arch/ia64/sn/kernel/pio_phys.S b/arch/ia64/sn/kernel/pio_phys.S new file mode 100644 index 00000000000..3c7d48d6ecb --- /dev/null +++ b/arch/ia64/sn/kernel/pio_phys.S @@ -0,0 +1,71 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000-2005 Silicon Graphics, Inc. All rights reserved. + * + * This file contains macros used to access MMR registers via + * uncached physical addresses. + * pio_phys_read_mmr - read an MMR + * pio_phys_write_mmr - write an MMR + * pio_atomic_phys_write_mmrs - atomically write 1 or 2 MMRs with psr.ic=0 + * Second MMR will be skipped if address is NULL + * + * Addresses passed to these routines should be uncached physical addresses + * ie., 0x80000.... + */ + + + +#include +#include + +GLOBAL_ENTRY(pio_phys_read_mmr) + .prologue + .regstk 1,0,0,0 + .body + mov r2=psr + rsm psr.i | psr.dt + ;; + srlz.d + ld8.acq r8=[r32] + ;; + mov psr.l=r2;; + srlz.d + br.ret.sptk.many rp +END(pio_phys_read_mmr) + +GLOBAL_ENTRY(pio_phys_write_mmr) + .prologue + .regstk 2,0,0,0 + .body + mov r2=psr + rsm psr.i | psr.dt + ;; + srlz.d + st8.rel [r32]=r33 + ;; + mov psr.l=r2;; + srlz.d + br.ret.sptk.many rp +END(pio_phys_write_mmr) + +GLOBAL_ENTRY(pio_atomic_phys_write_mmrs) + .prologue + .regstk 4,0,0,0 + .body + mov r2=psr + cmp.ne p9,p0=r34,r0; + rsm psr.i | psr.dt | psr.ic + ;; + srlz.d + st8.rel [r32]=r33 +(p9) st8.rel [r34]=r35 + ;; + mov psr.l=r2;; + srlz.d + br.ret.sptk.many rp +END(pio_atomic_phys_write_mmrs) + + -- cgit v1.2.3-18-g5258 From 9336b0836bf789136b51caf9ddd49dcbf1726cf4 Mon Sep 17 00:00:00 2001 From: Keith Owens Date: Wed, 8 Feb 2006 13:40:59 +1100 Subject: [IA64] MCA: print messages in MCA handler Print a message identifying the monarch MCA handler. Print a summary of the status of the slave MCA cpus. Signed-off-by: Keith Owens Signed-off-by: Tony Luck --- arch/ia64/kernel/mca.c | 25 +++++++++++++++++++++++-- 1 file changed, 23 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index ee7eec9ee57..23d54413c00 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -908,7 +908,7 @@ no_mod: static void ia64_wait_for_slaves(int monarch) { - int c, wait = 0; + int c, wait = 0, missing = 0; for_each_online_cpu(c) { if (c == monarch) continue; @@ -919,15 +919,32 @@ ia64_wait_for_slaves(int monarch) } } if (!wait) - return; + goto all_in; for_each_online_cpu(c) { if (c == monarch) continue; if (ia64_mc_info.imi_rendez_checkin[c] == IA64_MCA_RENDEZ_CHECKIN_NOTDONE) { udelay(5*1000000); /* wait 5 seconds for slaves (arbitrary) */ + if (ia64_mc_info.imi_rendez_checkin[c] == IA64_MCA_RENDEZ_CHECKIN_NOTDONE) + missing = 1; break; } } + if (!missing) + goto all_in; + printk(KERN_INFO "OS MCA slave did not rendezvous on cpu"); + for_each_online_cpu(c) { + if (c == monarch) + continue; + if (ia64_mc_info.imi_rendez_checkin[c] == IA64_MCA_RENDEZ_CHECKIN_NOTDONE) + printk(" %d", c); + } + printk("\n"); + return; + +all_in: + printk(KERN_INFO "All OS MCA slaves have reached rendezvous\n"); + return; } /* @@ -953,6 +970,10 @@ ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw, task_t *previous_current; oops_in_progress = 1; /* FIXME: make printk NMI/MCA/INIT safe */ + console_loglevel = 15; /* make sure printks make it to console */ + printk(KERN_INFO "Entered OS MCA handler. PSP=%lx cpu=%d monarch=%ld\n", + sos->proc_state_param, cpu, sos->monarch); + previous_current = ia64_mca_modify_original_stack(regs, sw, sos, "MCA"); monarch_cpu = cpu; if (notify_die(DIE_MCA_MONARCH_ENTER, "MCA", regs, 0, 0, 0) -- cgit v1.2.3-18-g5258 From e9ac054daaecf8a11f2113b60f2b6ce381c4f131 Mon Sep 17 00:00:00 2001 From: Keith Owens Date: Wed, 8 Feb 2006 13:41:04 +1100 Subject: [IA64] MCA: update MCA comm field for user space tasks Update the comm field on the MCA handler for user tasks as well as for verified kernel tasks. This helps to identify the task that was running when the MCA occurred. Signed-off-by: Keith Owens Signed-off-by: Tony Luck --- arch/ia64/kernel/mca.c | 52 +++++++++++++++++++++++++++++++------------------- 1 file changed, 32 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index 23d54413c00..4f8464ead63 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -630,6 +630,32 @@ copy_reg(const u64 *fr, u64 fnat, u64 *tr, u64 *tnat) *tnat |= (nat << tslot); } +/* Change the comm field on the MCA/INT task to include the pid that + * was interrupted, it makes for easier debugging. If that pid was 0 + * (swapper or nested MCA/INIT) then use the start of the previous comm + * field suffixed with its cpu. + */ + +static void +ia64_mca_modify_comm(const task_t *previous_current) +{ + char *p, comm[sizeof(current->comm)]; + if (previous_current->pid) + snprintf(comm, sizeof(comm), "%s %d", + current->comm, previous_current->pid); + else { + int l; + if ((p = strchr(previous_current->comm, ' '))) + l = p - previous_current->comm; + else + l = strlen(previous_current->comm); + snprintf(comm, sizeof(comm), "%s %*s %d", + current->comm, l, previous_current->comm, + task_thread_info(previous_current)->cpu); + } + memcpy(current->comm, comm, sizeof(current->comm)); +} + /* On entry to this routine, we are running on the per cpu stack, see * mca_asm.h. The original stack has not been touched by this event. Some of * the original stack's registers will be in the RBS on this stack. This stack @@ -648,7 +674,7 @@ ia64_mca_modify_original_stack(struct pt_regs *regs, struct ia64_sal_os_state *sos, const char *type) { - char *p, comm[sizeof(current->comm)]; + char *p; ia64_va va; extern char ia64_leave_kernel[]; /* Need asm address, not function descriptor */ const pal_min_state_area_t *ms = sos->pal_min_state; @@ -721,6 +747,10 @@ ia64_mca_modify_original_stack(struct pt_regs *regs, /* Verify the previous stack state before we change it */ if (user_mode(regs)) { msg = "occurred in user space"; + /* previous_current is guaranteed to be valid when the task was + * in user space, so ... + */ + ia64_mca_modify_comm(previous_current); goto no_mod; } if (r13 != sos->prev_IA64_KR_CURRENT) { @@ -750,25 +780,7 @@ ia64_mca_modify_original_stack(struct pt_regs *regs, goto no_mod; } - /* Change the comm field on the MCA/INT task to include the pid that - * was interrupted, it makes for easier debugging. If that pid was 0 - * (swapper or nested MCA/INIT) then use the start of the previous comm - * field suffixed with its cpu. - */ - if (previous_current->pid) - snprintf(comm, sizeof(comm), "%s %d", - current->comm, previous_current->pid); - else { - int l; - if ((p = strchr(previous_current->comm, ' '))) - l = p - previous_current->comm; - else - l = strlen(previous_current->comm); - snprintf(comm, sizeof(comm), "%s %*s %d", - current->comm, l, previous_current->comm, - task_thread_info(previous_current)->cpu); - } - memcpy(current->comm, comm, sizeof(current->comm)); + ia64_mca_modify_comm(previous_current); /* Make the original task look blocked. First stack a struct pt_regs, * describing the state at the time of interrupt. mca_asm.S built a -- cgit v1.2.3-18-g5258 From 2730c9295a9a797a22b800d3befd6a64fdc56b02 Mon Sep 17 00:00:00 2001 From: Keith Owens Date: Wed, 8 Feb 2006 13:41:10 +1100 Subject: [IA64] MCA: remove obsolete ifdef No platform in the community tree uses PLATFORM_MCA_HANDLERS, remove the references. Signed-off-by: Keith Owens Signed-off-by: Tony Luck --- arch/ia64/kernel/mca.c | 7 ------- 1 file changed, 7 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index 4f8464ead63..909fed2c249 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -281,11 +281,6 @@ ia64_mca_log_sal_error_record(int sal_info_type) ia64_sal_clear_state_info(sal_info_type); } -/* - * platform dependent error handling - */ -#ifndef PLATFORM_MCA_HANDLERS - #ifdef CONFIG_ACPI int cpe_vector = -1; @@ -377,8 +372,6 @@ ia64_mca_register_cpev (int cpev) } #endif /* CONFIG_ACPI */ -#endif /* PLATFORM_MCA_HANDLERS */ - /* * ia64_mca_cmc_vector_setup * -- cgit v1.2.3-18-g5258 From 66f2d025e234d44e35ae5bcec328078c35b8a8fb Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Tue, 31 Jan 2006 17:52:59 -0600 Subject: [PATCH] powerpc: Fix Kernel FP unavail exception for BookE Updated FP unavailable exception to refer to the correct function in traps.c. head_booke.h was using the old name, KernelFP, instead of kernel_fp_unavailable_exception. Signed-off-by: Becky Bruce Acked-by: Kumar Gala Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/head_booke.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h index 5827c27e0b5..8536e767616 100644 --- a/arch/powerpc/kernel/head_booke.h +++ b/arch/powerpc/kernel/head_booke.h @@ -358,6 +358,6 @@ label: NORMAL_EXCEPTION_PROLOG; \ bne load_up_fpu; /* if from user, just load it up */ \ addi r3,r1,STACK_FRAME_OVERHEAD; \ - EXC_XFER_EE_LITE(0x800, KernelFP) + EXC_XFER_EE_LITE(0x800, kernel_fp_unavailable_exception) #endif /* __HEAD_BOOKE_H__ */ -- cgit v1.2.3-18-g5258 From 46ed55f647371008c33e06e61459192f96cc24ca Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Tue, 7 Feb 2006 21:22:52 -0600 Subject: [PATCH] powerpc: mpc85xx_ads.c include file cleanup Cut-and-paste from the old platform code in arch/ppc resulted in arch/powerpc/platforms/85xx/mpc85xx_ads.c having way too many header files included. Clean this up. Signed-off-by: Becky Bruce Signed-off-by: Kumar Gala Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/85xx/mpc85xx_ads.c | 21 --------------------- 1 file changed, 21 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c index 41191e9aa52..9e8a91bc801 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -14,38 +14,17 @@ #include #include #include -#include -#include -#include #include #include -#include -#include #include -#include #include #include -#include -#include /* for linux/serial_core.h */ -#include -#include -#include -#include -#include -#include #include -#include -#include -#include #include -#include #include -#include #include #include -#include -#include #include #include #include -- cgit v1.2.3-18-g5258 From e19217d42e3d12d74d9eca40827721a3ef1b251c Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Tue, 7 Feb 2006 21:27:34 -0600 Subject: [PATCH] powerpc: rename mpc85xx.c to misc.c Rename mpc85xx.c to misc.c to match the pattern established by the 8349 port - consistency is a good thing. Also run Lindent on the file to clean it up. Signed-off-by: Becky Bruce Signed-off-by: Kumar Gala Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/85xx/Makefile | 2 +- arch/powerpc/platforms/85xx/misc.c | 31 +++++++++++++++++++++++++++++++ arch/powerpc/platforms/85xx/mpc85xx.c | 31 ------------------------------- 3 files changed, 32 insertions(+), 32 deletions(-) create mode 100644 arch/powerpc/platforms/85xx/misc.c delete mode 100644 arch/powerpc/platforms/85xx/mpc85xx.c (limited to 'arch') diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index b443206e61a..70e1190809f 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -1,4 +1,4 @@ # # Makefile for the PowerPC 85xx linux kernel. # -obj-$(CONFIG_PPC_85xx) += mpc85xx.o mpc85xx_ads.o +obj-$(CONFIG_PPC_85xx) += misc.o mpc85xx_ads.o diff --git a/arch/powerpc/platforms/85xx/misc.c b/arch/powerpc/platforms/85xx/misc.c new file mode 100644 index 00000000000..26c5e822c7c --- /dev/null +++ b/arch/powerpc/platforms/85xx/misc.c @@ -0,0 +1,31 @@ +/* + * MPC85xx generic code. + * + * Maintained by Kumar Gala (see MAINTAINERS for contact information) + * + * Copyright 2005 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include +#include +#include + +extern void abort(void); + +void mpc85xx_restart(char *cmd) +{ + local_irq_disable(); + abort(); +} + +/* For now this is a pass through */ +phys_addr_t fixup_bigphys_addr(phys_addr_t addr, phys_addr_t size) +{ + return addr; +}; + +EXPORT_SYMBOL(fixup_bigphys_addr); diff --git a/arch/powerpc/platforms/85xx/mpc85xx.c b/arch/powerpc/platforms/85xx/mpc85xx.c deleted file mode 100644 index 82510385d88..00000000000 --- a/arch/powerpc/platforms/85xx/mpc85xx.c +++ /dev/null @@ -1,31 +0,0 @@ -/* - * MPC85xx generic code. - * - * Maintained by Kumar Gala (see MAINTAINERS for contact information) - * - * Copyright 2005 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include -#include -#include - -extern void abort(void); - -void -mpc85xx_restart(char *cmd) -{ - local_irq_disable(); - abort(); -} - -/* For now this is a pass through */ -phys_addr_t fixup_bigphys_addr(phys_addr_t addr, phys_addr_t size) -{ - return addr; -}; -EXPORT_SYMBOL(fixup_bigphys_addr); -- cgit v1.2.3-18-g5258 From fbc94e7c3d78d53c7fa671e02e5bb6fbb3254f85 Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Tue, 7 Feb 2006 21:29:42 -0600 Subject: [PATCH] powerpc: lindent 85xx platform code Ran arch/powerpc/platforms/85xx through Lindent Signed-off-by: Becky Bruce Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/85xx/mpc8540_ads.h | 2 +- arch/powerpc/platforms/85xx/mpc85xx_ads.c | 46 ++++++++++++------------------- 2 files changed, 19 insertions(+), 29 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/85xx/mpc8540_ads.h b/arch/powerpc/platforms/85xx/mpc8540_ads.h index 47609c97e01..b3ec88caad1 100644 --- a/arch/powerpc/platforms/85xx/mpc8540_ads.h +++ b/arch/powerpc/platforms/85xx/mpc8540_ads.h @@ -57,4 +57,4 @@ /* Offset of CPM register space */ #define CPM_MAP_ADDR (CCSRBAR + MPC85xx_CPM_OFFSET) -#endif /* __MACH_MPC8540ADS_H__ */ +#endif /* __MACH_MPC8540ADS_H__ */ diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c index 9e8a91bc801..ba6798d4765 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -38,7 +38,6 @@ unsigned long isa_io_base = 0; unsigned long isa_mem_base = 0; #endif - /* * Internal interrupts are all Level Sensitive, and Positive Polarity * @@ -47,28 +46,27 @@ unsigned long isa_mem_base = 0; */ static u_char mpc85xx_ads_openpic_initsenses[] __initdata = { MPC85XX_INTERNAL_IRQ_SENSES, - 0x0, /* External 0: */ + 0x0, /* External 0: */ #if defined(CONFIG_PCI) (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 1: PCI slot 0 */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 2: PCI slot 1 */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 3: PCI slot 2 */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 4: PCI slot 3 */ #else - 0x0, /* External 1: */ - 0x0, /* External 2: */ - 0x0, /* External 3: */ - 0x0, /* External 4: */ + 0x0, /* External 1: */ + 0x0, /* External 2: */ + 0x0, /* External 3: */ + 0x0, /* External 4: */ #endif (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */ - 0x0, /* External 6: */ + 0x0, /* External 6: */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 7: PHY */ - 0x0, /* External 8: */ - 0x0, /* External 9: */ - 0x0, /* External 10: */ - 0x0, /* External 11: */ + 0x0, /* External 8: */ + 0x0, /* External 9: */ + 0x0, /* External 10: */ + 0x0, /* External 11: */ }; - void __init mpc85xx_ads_pic_init(void) { struct mpic *mpic1; @@ -78,10 +76,11 @@ void __init mpc85xx_ads_pic_init(void) OpenPIC_PAddr = get_immrbase() + MPC85xx_OPENPIC_OFFSET; mpic1 = mpic_alloc(OpenPIC_PAddr, - MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, - 4, MPC85xx_OPENPIC_IRQ_OFFSET, 0, 250, - mpc85xx_ads_openpic_initsenses, - sizeof(mpc85xx_ads_openpic_initsenses), " OpenPIC "); + MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + 4, MPC85xx_OPENPIC_IRQ_OFFSET, 0, 250, + mpc85xx_ads_openpic_initsenses, + sizeof(mpc85xx_ads_openpic_initsenses), + " OpenPIC "); BUG_ON(mpic1 == NULL); mpic_assign_isu(mpic1, 0, OpenPIC_PAddr + 0x10200); mpic_assign_isu(mpic1, 1, OpenPIC_PAddr + 0x10280); @@ -105,12 +104,10 @@ void __init mpc85xx_ads_pic_init(void) mpic_init(mpic1); } - /* * Setup the architecture */ -static void __init -mpc85xx_ads_setup_arch(void) +static void __init mpc85xx_ads_setup_arch(void) { struct device_node *cpu; @@ -128,7 +125,6 @@ mpc85xx_ads_setup_arch(void) loops_per_jiffy = 50000000 / HZ; of_node_put(cpu); } - #ifdef CONFIG_ROOT_NFS ROOT_DEV = Root_NFS; #else @@ -136,9 +132,7 @@ mpc85xx_ads_setup_arch(void) #endif } - -void -mpc85xx_ads_show_cpuinfo(struct seq_file *m) +void mpc85xx_ads_show_cpuinfo(struct seq_file *m) { uint pvid, svid, phid1; uint memsize = total_memory; @@ -159,9 +153,7 @@ mpc85xx_ads_show_cpuinfo(struct seq_file *m) seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); } - -void __init -platform_init(void) +void __init platform_init(void) { ppc_md.setup_arch = mpc85xx_ads_setup_arch; ppc_md.show_cpuinfo = mpc85xx_ads_show_cpuinfo; @@ -183,5 +175,3 @@ platform_init(void) if (ppc_md.progress) ppc_md.progress("mpc85xx_ads platform_init(): exit", 0); } - - -- cgit v1.2.3-18-g5258 From a7cb03375d794d3494561bbad90aeab13ff7e4d0 Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Wed, 8 Feb 2006 16:41:26 -0600 Subject: [PATCH] powerpc/ppc: Add missing isyncs in head_fsl_booke.S The e500 core reference manual indicates that isync is required after mtmsr(DE bit) and mtspr DBCR0. Add isyncs to make the code conform to the spec. Signed-off-by: Becky Bruce Signed-off-by: Kumar Gala Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/head_fsl_booke.S | 4 ++++ arch/ppc/kernel/head_fsl_booke.S | 4 ++++ 2 files changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index 8d60fa99fc4..0abd05f14f8 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -316,6 +316,7 @@ skpinv: addi r6,r6,1 /* Increment */ */ lis r2,DBCR0_IDM@h mtspr SPRN_DBCR0,r2 + isync /* clear any residual debug events */ li r2,-1 mtspr SPRN_DBSR,r2 @@ -1002,12 +1003,15 @@ _GLOBAL(giveup_fpu) _GLOBAL(abort) li r13,0 mtspr SPRN_DBCR0,r13 /* disable all debug events */ + isync mfmsr r13 ori r13,r13,MSR_DE@l /* Enable Debug Events */ mtmsr r13 + isync mfspr r13,SPRN_DBCR0 lis r13,(DBCR0_IDM|DBCR0_RST_CHIP)@h mtspr SPRN_DBCR0,r13 + isync _GLOBAL(set_context) diff --git a/arch/ppc/kernel/head_fsl_booke.S b/arch/ppc/kernel/head_fsl_booke.S index 8d60fa99fc4..0abd05f14f8 100644 --- a/arch/ppc/kernel/head_fsl_booke.S +++ b/arch/ppc/kernel/head_fsl_booke.S @@ -316,6 +316,7 @@ skpinv: addi r6,r6,1 /* Increment */ */ lis r2,DBCR0_IDM@h mtspr SPRN_DBCR0,r2 + isync /* clear any residual debug events */ li r2,-1 mtspr SPRN_DBSR,r2 @@ -1002,12 +1003,15 @@ _GLOBAL(giveup_fpu) _GLOBAL(abort) li r13,0 mtspr SPRN_DBCR0,r13 /* disable all debug events */ + isync mfmsr r13 ori r13,r13,MSR_DE@l /* Enable Debug Events */ mtmsr r13 + isync mfspr r13,SPRN_DBCR0 lis r13,(DBCR0_IDM|DBCR0_RST_CHIP)@h mtspr SPRN_DBCR0,r13 + isync _GLOBAL(set_context) -- cgit v1.2.3-18-g5258 From 0941d57aa7034ef7010bd523752c2e3bee569ef1 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 10 Feb 2006 15:47:32 +1100 Subject: [PATCH] powerpc: Clean up pSeries firmware feature initialisation Clean up fw_feature_init in platforms/pseries/setup.c. Clean up white space and replace the while loop with a for loop - which seems clearer to me. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/setup.c | 48 ++++++++++++++++------------------ 1 file changed, 22 insertions(+), 26 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 9edeca83f43..984241bb776 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -263,48 +263,44 @@ static int __init pSeries_init_panel(void) arch_initcall(pSeries_init_panel); -/* Build up the ppc64_firmware_features bitmask field - * using contents of device-tree/ibm,hypertas-functions. - * Ultimately this functionality may be moved into prom.c prom_init(). +/* Build up the firmware features bitmask using the contents of + * device-tree/ibm,hypertas-functions. Ultimately this functionality may + * be moved into prom.c prom_init(). */ static void __init fw_feature_init(void) { - struct device_node * dn; - char * hypertas; - unsigned int len; + struct device_node *dn; + char *hypertas, *s; + int len, i; DBG(" -> fw_feature_init()\n"); - ppc64_firmware_features = 0; dn = of_find_node_by_path("/rtas"); if (dn == NULL) { - printk(KERN_ERR "WARNING ! Cannot find RTAS in device-tree !\n"); - goto no_rtas; + printk(KERN_ERR "WARNING! Cannot find RTAS in device-tree!\n"); + goto out; } hypertas = get_property(dn, "ibm,hypertas-functions", &len); - if (hypertas) { - while (len > 0){ - int i, hypertas_len; + if (hypertas == NULL) + goto out; + + for (s = hypertas; s < hypertas + len; s += strlen(s) + 1) { + for (i = 0; i < FIRMWARE_MAX_FEATURES; i++) { /* check value against table of strings */ - for(i=0; i < FIRMWARE_MAX_FEATURES ;i++) { - if ((firmware_features_table[i].name) && - (strcmp(firmware_features_table[i].name,hypertas))==0) { - /* we have a match */ - ppc64_firmware_features |= - (firmware_features_table[i].val); - break; - } - } - hypertas_len = strlen(hypertas); - len -= hypertas_len +1; - hypertas+= hypertas_len +1; + if (!firmware_features_table[i].name || + strcmp(firmware_features_table[i].name, s)) + continue; + + /* we have a match */ + ppc64_firmware_features |= + firmware_features_table[i].val; + break; } } +out: of_node_put(dn); -no_rtas: - DBG(" <- fw_feature_init()\n"); } -- cgit v1.2.3-18-g5258 From 1965746bce49ddf001af52c7985e16343c768021 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 10 Feb 2006 15:47:36 +1100 Subject: [PATCH] powerpc: Move pSeries firmware feature setup into platforms/pseries Currently we have some stuff in firmware.h and kernel/firmware.c that is #ifdef CONFIG_PPC_PSERIES. Move it all into platforms/pseries. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/firmware.c | 25 -------- arch/powerpc/platforms/pseries/Makefile | 3 +- arch/powerpc/platforms/pseries/firmware.c | 103 ++++++++++++++++++++++++++++++ arch/powerpc/platforms/pseries/firmware.h | 17 +++++ arch/powerpc/platforms/pseries/setup.c | 45 +------------ 5 files changed, 123 insertions(+), 70 deletions(-) create mode 100644 arch/powerpc/platforms/pseries/firmware.c create mode 100644 arch/powerpc/platforms/pseries/firmware.h (limited to 'arch') diff --git a/arch/powerpc/kernel/firmware.c b/arch/powerpc/kernel/firmware.c index 65eae752a52..4d37a3cb80f 100644 --- a/arch/powerpc/kernel/firmware.c +++ b/arch/powerpc/kernel/firmware.c @@ -18,28 +18,3 @@ #include unsigned long ppc64_firmware_features; - -#ifdef CONFIG_PPC_PSERIES -firmware_feature_t firmware_features_table[FIRMWARE_MAX_FEATURES] = { - {FW_FEATURE_PFT, "hcall-pft"}, - {FW_FEATURE_TCE, "hcall-tce"}, - {FW_FEATURE_SPRG0, "hcall-sprg0"}, - {FW_FEATURE_DABR, "hcall-dabr"}, - {FW_FEATURE_COPY, "hcall-copy"}, - {FW_FEATURE_ASR, "hcall-asr"}, - {FW_FEATURE_DEBUG, "hcall-debug"}, - {FW_FEATURE_PERF, "hcall-perf"}, - {FW_FEATURE_DUMP, "hcall-dump"}, - {FW_FEATURE_INTERRUPT, "hcall-interrupt"}, - {FW_FEATURE_MIGRATE, "hcall-migrate"}, - {FW_FEATURE_PERFMON, "hcall-perfmon"}, - {FW_FEATURE_CRQ, "hcall-crq"}, - {FW_FEATURE_VIO, "hcall-vio"}, - {FW_FEATURE_RDMA, "hcall-rdma"}, - {FW_FEATURE_LLAN, "hcall-lLAN"}, - {FW_FEATURE_BULK, "hcall-bulk"}, - {FW_FEATURE_XDABR, "hcall-xdabr"}, - {FW_FEATURE_MULTITCE, "hcall-multi-tce"}, - {FW_FEATURE_SPLPAR, "hcall-splpar"}, -}; -#endif diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index 61616d14407..930898635c9 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -1,5 +1,6 @@ obj-y := pci.o lpar.o hvCall.o nvram.o reconfig.o \ - setup.o iommu.o ras.o rtasd.o pci_dlpar.o + setup.o iommu.o ras.o rtasd.o pci_dlpar.o \ + firmware.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_IBMVIO) += vio.o obj-$(CONFIG_XICS) += xics.o diff --git a/arch/powerpc/platforms/pseries/firmware.c b/arch/powerpc/platforms/pseries/firmware.c new file mode 100644 index 00000000000..989f4bc136c --- /dev/null +++ b/arch/powerpc/platforms/pseries/firmware.c @@ -0,0 +1,103 @@ +/* + * pSeries firmware setup code. + * + * Portions from arch/powerpc/platforms/pseries/setup.c: + * Copyright (C) 1995 Linus Torvalds + * Adapted from 'alpha' version by Gary Thomas + * Modified by Cort Dougan (cort@cs.nmt.edu) + * Modified by PPC64 Team, IBM Corp + * + * Portions from arch/powerpc/kernel/firmware.c + * Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org) + * Modifications for ppc64: + * Copyright (C) 2003 Dave Engebretsen + * Copyright (C) 2005 Stephen Rothwell, IBM Corporation + * + * Copyright 2006 IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#undef DEBUG + +#include +#include + +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +typedef struct { + unsigned long val; + char * name; +} firmware_feature_t; + +static __initdata firmware_feature_t +firmware_features_table[FIRMWARE_MAX_FEATURES] = { + {FW_FEATURE_PFT, "hcall-pft"}, + {FW_FEATURE_TCE, "hcall-tce"}, + {FW_FEATURE_SPRG0, "hcall-sprg0"}, + {FW_FEATURE_DABR, "hcall-dabr"}, + {FW_FEATURE_COPY, "hcall-copy"}, + {FW_FEATURE_ASR, "hcall-asr"}, + {FW_FEATURE_DEBUG, "hcall-debug"}, + {FW_FEATURE_PERF, "hcall-perf"}, + {FW_FEATURE_DUMP, "hcall-dump"}, + {FW_FEATURE_INTERRUPT, "hcall-interrupt"}, + {FW_FEATURE_MIGRATE, "hcall-migrate"}, + {FW_FEATURE_PERFMON, "hcall-perfmon"}, + {FW_FEATURE_CRQ, "hcall-crq"}, + {FW_FEATURE_VIO, "hcall-vio"}, + {FW_FEATURE_RDMA, "hcall-rdma"}, + {FW_FEATURE_LLAN, "hcall-lLAN"}, + {FW_FEATURE_BULK, "hcall-bulk"}, + {FW_FEATURE_XDABR, "hcall-xdabr"}, + {FW_FEATURE_MULTITCE, "hcall-multi-tce"}, + {FW_FEATURE_SPLPAR, "hcall-splpar"}, +}; + +/* Build up the firmware features bitmask using the contents of + * device-tree/ibm,hypertas-functions. Ultimately this functionality may + * be moved into prom.c prom_init(). + */ +void __init fw_feature_init(void) +{ + struct device_node *dn; + char *hypertas, *s; + int len, i; + + DBG(" -> fw_feature_init()\n"); + + dn = of_find_node_by_path("/rtas"); + if (dn == NULL) { + printk(KERN_ERR "WARNING! Cannot find RTAS in device-tree!\n"); + goto out; + } + + hypertas = get_property(dn, "ibm,hypertas-functions", &len); + if (hypertas == NULL) + goto out; + + for (s = hypertas; s < hypertas + len; s += strlen(s) + 1) { + for (i = 0; i < FIRMWARE_MAX_FEATURES; i++) { + /* check value against table of strings */ + if (!firmware_features_table[i].name || + strcmp(firmware_features_table[i].name, s)) + continue; + + /* we have a match */ + ppc64_firmware_features |= + firmware_features_table[i].val; + break; + } + } + +out: + of_node_put(dn); + DBG(" <- fw_feature_init()\n"); +} diff --git a/arch/powerpc/platforms/pseries/firmware.h b/arch/powerpc/platforms/pseries/firmware.h new file mode 100644 index 00000000000..714f56f5536 --- /dev/null +++ b/arch/powerpc/platforms/pseries/firmware.h @@ -0,0 +1,17 @@ +/* + * Copyright 2006 IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _PSERIES_FIRMWARE_H +#define _PSERIES_FIRMWARE_H + +#include + +extern void __init fw_feature_init(void); + +#endif /* _PSERIES_FIRMWARE_H */ diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 984241bb776..b5996a7060f 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -60,7 +60,6 @@ #include #include #include "xics.h" -#include #include #include #include @@ -70,6 +69,7 @@ #include "plpar_wrappers.h" #include "ras.h" +#include "firmware.h" #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -262,49 +262,6 @@ static int __init pSeries_init_panel(void) } arch_initcall(pSeries_init_panel); - -/* Build up the firmware features bitmask using the contents of - * device-tree/ibm,hypertas-functions. Ultimately this functionality may - * be moved into prom.c prom_init(). - */ -static void __init fw_feature_init(void) -{ - struct device_node *dn; - char *hypertas, *s; - int len, i; - - DBG(" -> fw_feature_init()\n"); - - dn = of_find_node_by_path("/rtas"); - if (dn == NULL) { - printk(KERN_ERR "WARNING! Cannot find RTAS in device-tree!\n"); - goto out; - } - - hypertas = get_property(dn, "ibm,hypertas-functions", &len); - if (hypertas == NULL) - goto out; - - for (s = hypertas; s < hypertas + len; s += strlen(s) + 1) { - for (i = 0; i < FIRMWARE_MAX_FEATURES; i++) { - /* check value against table of strings */ - if (!firmware_features_table[i].name || - strcmp(firmware_features_table[i].name, s)) - continue; - - /* we have a match */ - ppc64_firmware_features |= - firmware_features_table[i].val; - break; - } - } - -out: - of_node_put(dn); - DBG(" <- fw_feature_init()\n"); -} - - static void __init pSeries_discover_pic(void) { struct device_node *np; -- cgit v1.2.3-18-g5258 From 75288c78c69020a574d93770c3a941b785f3d93d Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Fri, 20 Jan 2006 22:22:34 +0300 Subject: [PATCH] ppc32: Make platform devices being able to assign functions Implemented by modification of the .name field of the platform device, when PDs with the same names are to be used within different drivers, as -> : Corresponding drivers should change the .name in struct device_driver to reflect upper of course. Added ppc_sys_device_disable/enable function set, making it easier to disable all the inexistent/not utilized platform device way pdevs. By the check of the "disabled" bit in the config field of ppc_sys_specs, disabled platform devices will be either added/removed from the bus, or simply not registered on it, depending on the time when disable/enable call asserted. The default behaviour when nothing is disabled/enabled will be "all devices are enabled", which is the same as before. Also helper platform_notify_map function added, making assignment of board-specific platform_info more consistent and generic. Signed-off-by: Vitaly Bordug Signed-off-by: Marcelo Tosatti Signed-off-by: Paul Mackerras --- arch/ppc/syslib/ppc_sys.c | 177 +++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 174 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/ppc/syslib/ppc_sys.c b/arch/ppc/syslib/ppc_sys.c index c0b93c4191e..879783a41cf 100644 --- a/arch/ppc/syslib/ppc_sys.c +++ b/arch/ppc/syslib/ppc_sys.c @@ -15,11 +15,22 @@ */ #include +#include #include int (*ppc_sys_device_fixup) (struct platform_device * pdev); static int ppc_sys_inited; +static int ppc_sys_func_inited; + +static const char *ppc_sys_func_names[] = { + [PPC_SYS_FUNC_DUMMY] = "dummy", + [PPC_SYS_FUNC_ETH] = "eth", + [PPC_SYS_FUNC_UART] = "uart", + [PPC_SYS_FUNC_HLDC] = "hldc", + [PPC_SYS_FUNC_USB] = "usb", + [PPC_SYS_FUNC_IRDA] = "irda", +}; void __init identify_ppc_sys_by_id(u32 id) { @@ -38,13 +49,13 @@ void __init identify_ppc_sys_by_id(u32 id) void __init identify_ppc_sys_by_name(char *name) { unsigned int i = 0; - while (ppc_sys_specs[i].ppc_sys_name[0]) - { + while (ppc_sys_specs[i].ppc_sys_name[0]) { if (!strcmp(ppc_sys_specs[i].ppc_sys_name, name)) break; i++; } cur_ppc_sys_spec = &ppc_sys_specs[i]; + return; } @@ -128,6 +139,165 @@ void ppc_sys_device_remove(enum ppc_sys_devices dev) } } +/* Platform-notify mapping + * Helper function for BSP code to assign board-specific platfom-divice bits + */ + +void platform_notify_map(const struct platform_notify_dev_map *map, + struct device *dev) +{ + struct platform_device *pdev; + int len, idx; + const char *s; + + /* do nothing if no device or no bus_id */ + if (!dev || !dev->bus_id) + return; + + /* call per device map */ + while (map->bus_id != NULL) { + idx = -1; + s = strrchr(dev->bus_id, '.'); + if (s != NULL) + idx = (int)simple_strtol(s + 1, NULL, 10); + else + s = dev->bus_id; + + len = s - dev->bus_id; + + if (!strncmp(dev->bus_id, map->bus_id, len)) { + pdev = container_of(dev, struct platform_device, dev); + map->rtn(pdev, idx); + } + map++; + } +} + +/* + Function assignment stuff. + Intended to work as follows: + the device name defined in foo_devices.c will be concatenated with :"func", + where func is string map of respective function from platfom_device_func enum + + The PPC_SYS_FUNC_DUMMY function is intended to remove all assignments, making the device to appear + in platform bus with unmodified name. + */ + +/* + Here we'll replace .name pointers with fixed-lenght strings + Hereby, this should be called *before* any func stuff triggeded. + */ +void ppc_sys_device_initfunc(void) +{ + int i; + const char *name; + static char new_names[NUM_PPC_SYS_DEVS][BUS_ID_SIZE]; + enum ppc_sys_devices cur_dev; + + /* If inited yet, do nothing */ + if (ppc_sys_func_inited) + return; + + for (i = 0; i < cur_ppc_sys_spec->num_devices; i++) { + if ((cur_dev = cur_ppc_sys_spec->device_list[i]) < 0) + continue; + + if (ppc_sys_platform_devices[cur_dev].name) { + /*backup name */ + name = ppc_sys_platform_devices[cur_dev].name; + strlcpy(new_names[i], name, BUS_ID_SIZE); + ppc_sys_platform_devices[cur_dev].name = new_names[i]; + } + } + + ppc_sys_func_inited = 1; +} + +/*The "engine" of the func stuff. Here we either concat specified function string description + to the name, or remove it if PPC_SYS_FUNC_DUMMY parameter is passed here*/ +void ppc_sys_device_setfunc(enum ppc_sys_devices dev, + enum platform_device_func func) +{ + char *s; + char *name = (char *)ppc_sys_platform_devices[dev].name; + char tmp[BUS_ID_SIZE]; + + if (!ppc_sys_func_inited) { + printk(KERN_ERR "Unable to alter function - not inited!\n"); + return; + } + + if (ppc_sys_inited) { + platform_device_unregister(&ppc_sys_platform_devices[dev]); + } + + if ((s = (char *)strchr(name, ':')) != NULL) { /* reassign */ + /* Either change the name after ':' or remove func modifications */ + if (func != PPC_SYS_FUNC_DUMMY) + strlcpy(s + 1, ppc_sys_func_names[func], BUS_ID_SIZE); + else + *s = 0; + } else if (func != PPC_SYS_FUNC_DUMMY) { + /* do assignment if it is not just "clear" request */ + sprintf(tmp, "%s:%s", name, ppc_sys_func_names[func]); + strlcpy(name, tmp, BUS_ID_SIZE); + } + + if (ppc_sys_inited) { + platform_device_register(&ppc_sys_platform_devices[dev]); + } +} + +void ppc_sys_device_disable(enum ppc_sys_devices dev) +{ + BUG_ON(cur_ppc_sys_spec == NULL); + + /*Check if it is enabled*/ + if(!(cur_ppc_sys_spec->config[dev] & PPC_SYS_CONFIG_DISABLED)) { + if (ppc_sys_inited) { + platform_device_unregister(&ppc_sys_platform_devices[dev]); + } + cur_ppc_sys_spec->config[dev] |= PPC_SYS_CONFIG_DISABLED; + } +} + +void ppc_sys_device_enable(enum ppc_sys_devices dev) +{ + BUG_ON(cur_ppc_sys_spec == NULL); + + /*Check if it is disabled*/ + if(cur_ppc_sys_spec->config[dev] & PPC_SYS_CONFIG_DISABLED) { + if (ppc_sys_inited) { + platform_device_register(&ppc_sys_platform_devices[dev]); + } + cur_ppc_sys_spec->config[dev] &= ~PPC_SYS_CONFIG_DISABLED; + } + +} + +void ppc_sys_device_enable_all(void) +{ + enum ppc_sys_devices cur_dev; + int i; + + for (i = 0; i < cur_ppc_sys_spec->num_devices; i++) { + cur_dev = cur_ppc_sys_spec->device_list[i]; + ppc_sys_device_enable(cur_dev); + } +} + +void ppc_sys_device_disable_all(void) +{ + enum ppc_sys_devices cur_dev; + int i; + + for (i = 0; i < cur_ppc_sys_spec->num_devices; i++) { + cur_dev = cur_ppc_sys_spec->device_list[i]; + ppc_sys_device_disable(cur_dev); + } +} + + static int __init ppc_sys_init(void) { unsigned int i, dev_id, ret = 0; @@ -136,7 +306,8 @@ static int __init ppc_sys_init(void) for (i = 0; i < cur_ppc_sys_spec->num_devices; i++) { dev_id = cur_ppc_sys_spec->device_list[i]; - if (dev_id != -1) { + if ((dev_id != -1) && + !(cur_ppc_sys_spec->config[dev_id] & PPC_SYS_CONFIG_DISABLED)) { if (ppc_sys_device_fixup != NULL) ppc_sys_device_fixup(&ppc_sys_platform_devices [dev_id]); -- cgit v1.2.3-18-g5258 From 2ef9481e666b4654159ac9f847e6963809e3c470 Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Mon, 23 Jan 2006 10:58:20 -0600 Subject: [PATCH] powerpc: trivial: modify comments to refer to new location of files This patch removes all self references and fixes references to files in the now defunct arch/ppc64 tree. I think this accomplises everything wanted, though there might be a few references I missed. Signed-off-by: Jon Mason Signed-off-by: Paul Mackerras --- arch/powerpc/boot/install.sh | 2 -- arch/powerpc/kernel/entry_64.S | 4 +--- arch/powerpc/kernel/head_44x.S | 2 -- arch/powerpc/kernel/head_64.S | 2 -- arch/powerpc/kernel/head_8xx.S | 2 -- arch/powerpc/kernel/head_fsl_booke.S | 2 -- arch/powerpc/kernel/iomap.c | 2 -- arch/powerpc/kernel/iommu.c | 1 - arch/powerpc/kernel/irq.c | 2 -- arch/powerpc/kernel/kprobes.c | 1 - arch/powerpc/kernel/pci_iommu.c | 1 - arch/powerpc/kernel/process.c | 2 -- arch/powerpc/kernel/ptrace-common.h | 2 -- arch/powerpc/kernel/rtas-proc.c | 1 - arch/powerpc/kernel/rtas_pci.c | 2 -- arch/powerpc/kernel/signal_64.c | 2 -- arch/powerpc/kernel/vdso.c | 2 -- arch/powerpc/lib/copypage_64.S | 2 -- arch/powerpc/lib/copyuser_64.S | 2 -- arch/powerpc/lib/e2a.c | 4 +--- arch/powerpc/lib/memcpy_64.S | 2 -- arch/powerpc/lib/rheap.c | 2 -- arch/powerpc/mm/fault.c | 2 -- arch/powerpc/mm/hash_low_32.S | 2 -- arch/powerpc/mm/mmap.c | 2 -- arch/powerpc/mm/slb_low.S | 2 -- arch/powerpc/mm/tlb_64.c | 2 +- arch/powerpc/platforms/chrp/pegasos_eth.c | 2 -- arch/powerpc/platforms/chrp/setup.c | 2 -- arch/powerpc/platforms/chrp/time.c | 2 -- arch/powerpc/platforms/maple/time.c | 2 -- arch/powerpc/platforms/powermac/cpufreq_32.c | 2 -- arch/powerpc/platforms/powermac/feature.c | 2 -- arch/powerpc/platforms/powermac/nvram.c | 2 -- arch/powerpc/platforms/pseries/hvCall.S | 2 -- arch/powerpc/platforms/pseries/iommu.c | 2 -- arch/powerpc/platforms/pseries/pci.c | 2 -- arch/powerpc/sysdev/dcr.S | 2 -- arch/powerpc/sysdev/ipic.h | 2 -- arch/ppc/4xx_io/serial_sicc.c | 2 -- arch/ppc/amiga/amiints.c | 2 +- arch/ppc/amiga/bootinfo.c | 2 -- arch/ppc/amiga/cia.c | 2 -- arch/ppc/amiga/config.c | 2 -- arch/ppc/amiga/ints.c | 2 -- arch/ppc/boot/Makefile | 3 --- arch/ppc/boot/common/Makefile | 3 --- arch/ppc/boot/common/bootinfo.c | 2 -- arch/ppc/boot/common/misc-common.c | 2 -- arch/ppc/boot/common/serial_stub.c | 2 -- arch/ppc/boot/common/util.S | 2 -- arch/ppc/boot/include/mpc10x.h | 2 -- arch/ppc/boot/simple/cpc700_memory.c | 2 -- arch/ppc/boot/simple/head.S | 2 -- arch/ppc/boot/simple/misc-chestnut.c | 2 -- arch/ppc/boot/simple/misc-cpci690.c | 2 -- arch/ppc/boot/simple/misc-ev64260.c | 2 -- arch/ppc/boot/simple/misc-ev64360.c | 1 - arch/ppc/boot/simple/misc-katana.c | 2 -- arch/ppc/boot/simple/misc-mv64x60.c | 2 -- arch/ppc/boot/simple/misc-prep.c | 2 -- arch/ppc/boot/simple/misc-radstone_ppc7d.c | 2 -- arch/ppc/boot/simple/misc-spruce.c | 2 -- arch/ppc/boot/simple/misc.c | 2 -- arch/ppc/boot/simple/mpc10x_memory.c | 2 -- arch/ppc/boot/simple/mpc52xx_tty.c | 2 -- arch/ppc/boot/simple/mv64x60_tty.c | 2 -- arch/ppc/boot/simple/openbios.c | 2 -- arch/ppc/boot/simple/relocate.S | 2 -- arch/ppc/boot/utils/mkbugboot.c | 2 -- arch/ppc/kernel/head_44x.S | 2 -- arch/ppc/kernel/head_8xx.S | 2 -- arch/ppc/kernel/head_fsl_booke.S | 2 -- arch/ppc/kernel/traps.c | 2 -- arch/ppc/lib/rheap.c | 2 -- arch/ppc/math-emu/math.c | 2 -- arch/ppc/mm/fault.c | 2 -- arch/ppc/mm/hashtable.S | 2 -- arch/ppc/platforms/4xx/bamboo.c | 2 -- arch/ppc/platforms/4xx/bamboo.h | 2 -- arch/ppc/platforms/4xx/bubinga.h | 2 -- arch/ppc/platforms/4xx/cpci405.c | 2 -- arch/ppc/platforms/4xx/ebony.c | 2 -- arch/ppc/platforms/4xx/ebony.h | 2 -- arch/ppc/platforms/4xx/ep405.c | 2 -- arch/ppc/platforms/4xx/ep405.h | 2 -- arch/ppc/platforms/4xx/ibm405ep.c | 2 -- arch/ppc/platforms/4xx/ibm405ep.h | 2 -- arch/ppc/platforms/4xx/ibm405gp.h | 2 -- arch/ppc/platforms/4xx/ibm405gpr.c | 2 -- arch/ppc/platforms/4xx/ibm405gpr.h | 2 -- arch/ppc/platforms/4xx/ibm440ep.c | 2 -- arch/ppc/platforms/4xx/ibm440ep.h | 2 -- arch/ppc/platforms/4xx/ibm440gp.c | 2 -- arch/ppc/platforms/4xx/ibm440gp.h | 2 -- arch/ppc/platforms/4xx/ibm440gx.c | 2 -- arch/ppc/platforms/4xx/ibm440gx.h | 2 -- arch/ppc/platforms/4xx/ibm440sp.c | 2 -- arch/ppc/platforms/4xx/ibm440sp.h | 2 -- arch/ppc/platforms/4xx/ibmnp405h.c | 2 -- arch/ppc/platforms/4xx/ibmnp405h.h | 2 -- arch/ppc/platforms/4xx/ibmstb4.c | 2 -- arch/ppc/platforms/4xx/ibmstb4.h | 2 -- arch/ppc/platforms/4xx/ibmstbx25.c | 2 -- arch/ppc/platforms/4xx/ibmstbx25.h | 2 -- arch/ppc/platforms/4xx/luan.c | 2 -- arch/ppc/platforms/4xx/luan.h | 2 -- arch/ppc/platforms/4xx/ocotea.c | 2 -- arch/ppc/platforms/4xx/ocotea.h | 2 -- arch/ppc/platforms/4xx/ppc440spe.c | 2 -- arch/ppc/platforms/4xx/ppc440spe.h | 2 -- arch/ppc/platforms/4xx/redwood5.c | 2 -- arch/ppc/platforms/4xx/redwood5.h | 2 -- arch/ppc/platforms/4xx/redwood6.c | 2 -- arch/ppc/platforms/4xx/redwood6.h | 2 -- arch/ppc/platforms/4xx/sycamore.c | 2 -- arch/ppc/platforms/4xx/sycamore.h | 2 -- arch/ppc/platforms/4xx/walnut.c | 2 -- arch/ppc/platforms/4xx/walnut.h | 2 -- arch/ppc/platforms/4xx/xilinx_ml300.c | 2 -- arch/ppc/platforms/4xx/xilinx_ml300.h | 2 -- arch/ppc/platforms/4xx/yucca.c | 2 -- arch/ppc/platforms/4xx/yucca.h | 2 -- arch/ppc/platforms/83xx/mpc834x_sys.c | 2 -- arch/ppc/platforms/83xx/mpc834x_sys.h | 2 -- arch/ppc/platforms/85xx/mpc8540_ads.c | 2 -- arch/ppc/platforms/85xx/mpc8540_ads.h | 2 -- arch/ppc/platforms/85xx/mpc8555_cds.h | 2 -- arch/ppc/platforms/85xx/mpc8560_ads.c | 2 -- arch/ppc/platforms/85xx/mpc8560_ads.h | 2 -- arch/ppc/platforms/85xx/mpc85xx_ads_common.c | 2 -- arch/ppc/platforms/85xx/mpc85xx_ads_common.h | 2 -- arch/ppc/platforms/85xx/mpc85xx_cds_common.c | 2 -- arch/ppc/platforms/85xx/mpc85xx_cds_common.h | 2 -- arch/ppc/platforms/85xx/sbc8560.c | 2 -- arch/ppc/platforms/85xx/sbc8560.h | 2 -- arch/ppc/platforms/85xx/sbc85xx.c | 2 -- arch/ppc/platforms/85xx/sbc85xx.h | 2 -- arch/ppc/platforms/85xx/stx_gp3.c | 2 -- arch/ppc/platforms/85xx/stx_gp3.h | 2 -- arch/ppc/platforms/85xx/tqm85xx.c | 2 -- arch/ppc/platforms/85xx/tqm85xx.h | 2 -- arch/ppc/platforms/apus_setup.c | 2 -- arch/ppc/platforms/chestnut.c | 2 -- arch/ppc/platforms/chestnut.h | 2 -- arch/ppc/platforms/chrp_pegasos_eth.c | 2 -- arch/ppc/platforms/chrp_setup.c | 2 -- arch/ppc/platforms/chrp_time.c | 2 -- arch/ppc/platforms/cpci690.c | 2 -- arch/ppc/platforms/cpci690.h | 2 -- arch/ppc/platforms/ev64260.c | 2 -- arch/ppc/platforms/ev64260.h | 2 -- arch/ppc/platforms/ev64360.c | 2 -- arch/ppc/platforms/ev64360.h | 2 -- arch/ppc/platforms/gemini.h | 3 --- arch/ppc/platforms/gemini_prom.S | 2 -- arch/ppc/platforms/gemini_setup.c | 2 -- arch/ppc/platforms/hdpu.c | 3 --- arch/ppc/platforms/hdpu.h | 2 -- arch/ppc/platforms/katana.c | 2 -- arch/ppc/platforms/katana.h | 2 -- arch/ppc/platforms/lite5200.c | 2 -- arch/ppc/platforms/lite5200.h | 2 -- arch/ppc/platforms/lopec.c | 2 -- arch/ppc/platforms/mvme5100.c | 2 -- arch/ppc/platforms/pal4.h | 2 -- arch/ppc/platforms/pal4_pci.c | 2 -- arch/ppc/platforms/pal4_serial.h | 2 -- arch/ppc/platforms/pal4_setup.c | 2 -- arch/ppc/platforms/powerpmc250.c | 2 -- arch/ppc/platforms/pplus.c | 2 -- arch/ppc/platforms/pplus.h | 2 -- arch/ppc/platforms/pq2ads.c | 2 -- arch/ppc/platforms/prep_setup.c | 2 -- arch/ppc/platforms/prpmc750.c | 2 -- arch/ppc/platforms/prpmc800.c | 2 -- arch/ppc/platforms/radstone_ppc7d.c | 2 -- arch/ppc/platforms/radstone_ppc7d.h | 2 -- arch/ppc/platforms/sandpoint.c | 2 -- arch/ppc/platforms/sandpoint.h | 2 -- arch/ppc/platforms/sbc82xx.c | 2 -- arch/ppc/platforms/spruce.c | 2 -- arch/ppc/platforms/tqm8260_setup.c | 2 -- arch/ppc/syslib/cpc700.h | 2 -- arch/ppc/syslib/cpc700_pic.c | 2 -- arch/ppc/syslib/cpc710.h | 2 -- arch/ppc/syslib/gen550.h | 2 -- arch/ppc/syslib/gen550_dbg.c | 2 -- arch/ppc/syslib/gen550_kgdb.c | 2 -- arch/ppc/syslib/gt64260_pic.c | 2 -- arch/ppc/syslib/harrier.c | 2 -- arch/ppc/syslib/hawk_common.c | 2 -- arch/ppc/syslib/ibm440gp_common.c | 2 -- arch/ppc/syslib/ibm440gp_common.h | 2 -- arch/ppc/syslib/ibm440gx_common.c | 2 -- arch/ppc/syslib/ibm440gx_common.h | 2 -- arch/ppc/syslib/ibm440sp_common.c | 2 -- arch/ppc/syslib/ibm440sp_common.h | 2 -- arch/ppc/syslib/ibm44x_common.c | 2 -- arch/ppc/syslib/ibm44x_common.h | 2 -- arch/ppc/syslib/m8260_pci_erratum9.c | 2 -- arch/ppc/syslib/m8260_setup.c | 2 -- arch/ppc/syslib/m8xx_setup.c | 2 -- arch/ppc/syslib/mpc10x_common.c | 2 -- arch/ppc/syslib/mpc52xx_devices.c | 2 -- arch/ppc/syslib/mpc52xx_pci.c | 2 -- arch/ppc/syslib/mpc52xx_pci.h | 2 -- arch/ppc/syslib/mpc52xx_pic.c | 2 -- arch/ppc/syslib/mpc52xx_setup.c | 2 -- arch/ppc/syslib/mpc52xx_sys.c | 2 -- arch/ppc/syslib/mpc83xx_devices.c | 2 -- arch/ppc/syslib/mpc83xx_sys.c | 2 -- arch/ppc/syslib/mpc85xx_devices.c | 2 -- arch/ppc/syslib/mpc85xx_sys.c | 2 -- arch/ppc/syslib/mpc8xx_devices.c | 2 -- arch/ppc/syslib/mpc8xx_sys.c | 2 -- arch/ppc/syslib/mv64360_pic.c | 2 -- arch/ppc/syslib/mv64x60.c | 2 -- arch/ppc/syslib/mv64x60_dbg.c | 2 -- arch/ppc/syslib/mv64x60_win.c | 2 -- arch/ppc/syslib/open_pic.c | 2 -- arch/ppc/syslib/open_pic2.c | 2 -- arch/ppc/syslib/open_pic_defs.h | 2 -- arch/ppc/syslib/pci_auto.c | 2 -- arch/ppc/syslib/ppc4xx_dma.c | 2 -- arch/ppc/syslib/ppc4xx_pic.c | 2 -- arch/ppc/syslib/ppc4xx_sgdma.c | 2 -- arch/ppc/syslib/ppc83xx_setup.c | 2 -- arch/ppc/syslib/ppc83xx_setup.h | 2 -- arch/ppc/syslib/ppc85xx_common.c | 2 -- arch/ppc/syslib/ppc85xx_common.h | 2 -- arch/ppc/syslib/ppc85xx_setup.c | 2 -- arch/ppc/syslib/ppc85xx_setup.h | 2 -- arch/ppc/syslib/ppc_sys.c | 2 -- arch/ppc/syslib/pq2_devices.c | 2 -- arch/ppc/syslib/pq2_sys.c | 2 -- arch/ppc/syslib/prep_nvram.c | 2 -- arch/ppc/syslib/todc_time.c | 2 -- arch/ppc/syslib/xilinx_pic.c | 2 -- 239 files changed, 4 insertions(+), 477 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/install.sh b/arch/powerpc/boot/install.sh index eacce959081..b002bfd5678 100644 --- a/arch/powerpc/boot/install.sh +++ b/arch/powerpc/boot/install.sh @@ -1,7 +1,5 @@ #!/bin/sh # -# arch/ppc64/boot/install.sh -# # This file is subject to the terms and conditions of the GNU General Public # License. See the file "COPYING" in the main directory of this archive # for more details. diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 388f861b8ed..79a0c910f0d 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -1,6 +1,4 @@ /* - * arch/ppc64/kernel/entry.S - * * PowerPC version * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP @@ -374,7 +372,7 @@ _GLOBAL(ret_from_fork) * the fork code also. * * The code which creates the new task context is in 'copy_thread' - * in arch/ppc64/kernel/process.c + * in arch/powerpc/kernel/process.c */ .align 7 _GLOBAL(_switch) diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S index 8b49679fad5..47c7fa148c9 100644 --- a/arch/powerpc/kernel/head_44x.S +++ b/arch/powerpc/kernel/head_44x.S @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/head_44x.S - * * Kernel execution entry point code. * * Copyright (c) 1995-1996 Gary Thomas diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 41565962939..7ebb73665e9 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -1,6 +1,4 @@ /* - * arch/ppc64/kernel/head.S - * * PowerPC version * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) * diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S index bc6d1ac5523..28941f5ce67 100644 --- a/arch/powerpc/kernel/head_8xx.S +++ b/arch/powerpc/kernel/head_8xx.S @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/except_8xx.S - * * PowerPC version * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index 0abd05f14f8..dd86bbed762 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/head_fsl_booke.S - * * Kernel execution entry point code. * * Copyright (c) 1995-1996 Gary Thomas diff --git a/arch/powerpc/kernel/iomap.c b/arch/powerpc/kernel/iomap.c index 6160c8dbb7c..fd8214caede 100644 --- a/arch/powerpc/kernel/iomap.c +++ b/arch/powerpc/kernel/iomap.c @@ -1,6 +1,4 @@ /* - * arch/ppc64/kernel/iomap.c - * * ppc64 "iomap" interface implementation. * * (C) Copyright 2004 Linus Torvalds diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c index 946f3219fd2..d9a7fdef59b 100644 --- a/arch/powerpc/kernel/iommu.c +++ b/arch/powerpc/kernel/iommu.c @@ -1,5 +1,4 @@ /* - * arch/ppc64/kernel/iommu.c * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation * * Rewrite, cleanup, new allocation schemes, virtual merging: diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index d1fffce86df..edb2b00edbd 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/irq.c - * * Derived from arch/i386/kernel/irq.c * Copyright (C) 1992 Linus Torvalds * Adapted from arch/i386 by Gary Thomas diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c index cfab48566db..258039fb301 100644 --- a/arch/powerpc/kernel/kprobes.c +++ b/arch/powerpc/kernel/kprobes.c @@ -1,6 +1,5 @@ /* * Kernel Probes (KProbes) - * arch/ppc64/kernel/kprobes.c * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/powerpc/kernel/pci_iommu.c b/arch/powerpc/kernel/pci_iommu.c index bdf15dbbf4f..c336f3e31cf 100644 --- a/arch/powerpc/kernel/pci_iommu.c +++ b/arch/powerpc/kernel/pci_iommu.c @@ -1,5 +1,4 @@ /* - * arch/ppc64/kernel/pci_iommu.c * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation * * Rewrite, cleanup, new allocation schemes: diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 57703994a06..1201880cab4 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/process.c - * * Derived from "arch/i386/kernel/process.c" * Copyright (C) 1995 Linus Torvalds * diff --git a/arch/powerpc/kernel/ptrace-common.h b/arch/powerpc/kernel/ptrace-common.h index 5ccbdbe0d5c..c42a860c8d2 100644 --- a/arch/powerpc/kernel/ptrace-common.h +++ b/arch/powerpc/kernel/ptrace-common.h @@ -1,6 +1,4 @@ /* - * linux/arch/ppc64/kernel/ptrace-common.h - * * Copyright (c) 2002 Stephen Rothwell, IBM Coproration * Extracted from ptrace.c and ptrace32.c * diff --git a/arch/powerpc/kernel/rtas-proc.c b/arch/powerpc/kernel/rtas-proc.c index 7a95b8a2835..1f03fb28cc0 100644 --- a/arch/powerpc/kernel/rtas-proc.c +++ b/arch/powerpc/kernel/rtas-proc.c @@ -1,5 +1,4 @@ /* - * arch/ppc64/kernel/rtas-proc.c * Copyright (C) 2000 Tilmann Bitterberg * (tilmann@bitterberg.de) * diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c index 5579f655991..03afb79e27e 100644 --- a/arch/powerpc/kernel/rtas_pci.c +++ b/arch/powerpc/kernel/rtas_pci.c @@ -1,6 +1,4 @@ /* - * arch/ppc64/kernel/rtas_pci.c - * * Copyright (C) 2001 Dave Engebretsen, IBM Corporation * Copyright (C) 2003 Anton Blanchard , IBM * diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index 497a5d3df35..59b9c9cdd6a 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -1,6 +1,4 @@ /* - * linux/arch/ppc64/kernel/signal.c - * * PowerPC version * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) * diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c index f0c47dab090..b316fda58b8 100644 --- a/arch/powerpc/kernel/vdso.c +++ b/arch/powerpc/kernel/vdso.c @@ -1,6 +1,4 @@ /* - * linux/arch/ppc64/kernel/vdso.c - * * Copyright (C) 2004 Benjamin Herrenschmidt, IBM Corp. * * diff --git a/arch/powerpc/lib/copypage_64.S b/arch/powerpc/lib/copypage_64.S index 40523b14010..f9837f44ac0 100644 --- a/arch/powerpc/lib/copypage_64.S +++ b/arch/powerpc/lib/copypage_64.S @@ -1,6 +1,4 @@ /* - * arch/ppc64/lib/copypage.S - * * Copyright (C) 2002 Paul Mackerras, IBM Corp. * * This program is free software; you can redistribute it and/or diff --git a/arch/powerpc/lib/copyuser_64.S b/arch/powerpc/lib/copyuser_64.S index 6d69ef39b7d..a6b54cb97c4 100644 --- a/arch/powerpc/lib/copyuser_64.S +++ b/arch/powerpc/lib/copyuser_64.S @@ -1,6 +1,4 @@ /* - * arch/ppc64/lib/copyuser.S - * * Copyright (C) 2002 Paul Mackerras, IBM Corp. * * This program is free software; you can redistribute it and/or diff --git a/arch/powerpc/lib/e2a.c b/arch/powerpc/lib/e2a.c index d2b83488792..4f88f4cc21e 100644 --- a/arch/powerpc/lib/e2a.c +++ b/arch/powerpc/lib/e2a.c @@ -1,9 +1,7 @@ /* - * arch/ppc64/lib/e2a.c - * * EBCDIC to ASCII conversion * - * This function moved here from arch/ppc64/kernel/viopath.c + * This function moved here from arch/powerpc/platforms/iseries/viopath.c * * (C) Copyright 2000-2004 IBM Corporation * diff --git a/arch/powerpc/lib/memcpy_64.S b/arch/powerpc/lib/memcpy_64.S index 9ccacdf5bcb..fd66acfd3e3 100644 --- a/arch/powerpc/lib/memcpy_64.S +++ b/arch/powerpc/lib/memcpy_64.S @@ -1,6 +1,4 @@ /* - * arch/ppc64/lib/memcpy.S - * * Copyright (C) 2002 Paul Mackerras, IBM Corp. * * This program is free software; you can redistribute it and/or diff --git a/arch/powerpc/lib/rheap.c b/arch/powerpc/lib/rheap.c index 42c5de2c898..31e511856dc 100644 --- a/arch/powerpc/lib/rheap.c +++ b/arch/powerpc/lib/rheap.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/rheap.c - * * A Remote Heap. Remote means that we don't touch the memory that the * heap points to. Normal heap implementations use the memory they manage * to place their list. We cannot do that because the memory we manage may diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c index a4815d31672..ec4adcb4bc2 100644 --- a/arch/powerpc/mm/fault.c +++ b/arch/powerpc/mm/fault.c @@ -1,6 +1,4 @@ /* - * arch/ppc/mm/fault.c - * * PowerPC version * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) * diff --git a/arch/powerpc/mm/hash_low_32.S b/arch/powerpc/mm/hash_low_32.S index 12ccd7155ba..ea469eefa14 100644 --- a/arch/powerpc/mm/hash_low_32.S +++ b/arch/powerpc/mm/hash_low_32.S @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/hashtable.S - * * $Id: hashtable.S,v 1.6 1999/10/08 01:56:15 paulus Exp $ * * PowerPC version diff --git a/arch/powerpc/mm/mmap.c b/arch/powerpc/mm/mmap.c index fe65f522aff..972a8e884b9 100644 --- a/arch/powerpc/mm/mmap.c +++ b/arch/powerpc/mm/mmap.c @@ -1,6 +1,4 @@ /* - * linux/arch/ppc64/mm/mmap.c - * * flexible mmap layout support * * Copyright 2003-2004 Red Hat Inc., Durham, North Carolina. diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S index d1acee38f16..abfaabf667b 100644 --- a/arch/powerpc/mm/slb_low.S +++ b/arch/powerpc/mm/slb_low.S @@ -1,6 +1,4 @@ /* - * arch/ppc64/mm/slb_low.S - * * Low-level SLB routines * * Copyright (C) 2004 David Gibson , IBM diff --git a/arch/powerpc/mm/tlb_64.c b/arch/powerpc/mm/tlb_64.c index bb3afb6e631..f734b11566c 100644 --- a/arch/powerpc/mm/tlb_64.c +++ b/arch/powerpc/mm/tlb_64.c @@ -36,7 +36,7 @@ DEFINE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch); /* This is declared as we are using the more or less generic - * include/asm-ppc64/tlb.h file -- tgall + * include/asm-powerpc/tlb.h file -- tgall */ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); DEFINE_PER_CPU(struct pte_freelist_batch *, pte_freelist_cur); diff --git a/arch/powerpc/platforms/chrp/pegasos_eth.c b/arch/powerpc/platforms/chrp/pegasos_eth.c index 29c86781c49..6ad4b1a72c9 100644 --- a/arch/powerpc/platforms/chrp/pegasos_eth.c +++ b/arch/powerpc/platforms/chrp/pegasos_eth.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/chrp_pegasos_eth.c - * * Copyright (C) 2005 Sven Luther * Thanks to : * Dale Farnsworth diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index e1fadbf4915..8bf4307e323 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/setup.c - * * Copyright (C) 1995 Linus Torvalds * Adapted from 'alpha' version by Gary Thomas * Modified by Cort Dougan (cort@cs.nmt.edu) diff --git a/arch/powerpc/platforms/chrp/time.c b/arch/powerpc/platforms/chrp/time.c index 78df2e7ca88..12c6f689b1a 100644 --- a/arch/powerpc/platforms/chrp/time.c +++ b/arch/powerpc/platforms/chrp/time.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/chrp_time.c - * * Copyright (C) 1991, 1992, 1995 Linus Torvalds * * Adapted for PowerPC (PReP) by Gary Thomas diff --git a/arch/powerpc/platforms/maple/time.c b/arch/powerpc/platforms/maple/time.c index 50bc4eb8535..5e6981d1737 100644 --- a/arch/powerpc/platforms/maple/time.c +++ b/arch/powerpc/platforms/maple/time.c @@ -1,6 +1,4 @@ /* - * arch/ppc64/kernel/maple_time.c - * * (c) Copyright 2004 Benjamin Herrenschmidt (benh@kernel.crashing.org), * IBM Corp. * diff --git a/arch/powerpc/platforms/powermac/cpufreq_32.c b/arch/powerpc/platforms/powermac/cpufreq_32.c index 56fd4e05fed..cfd6527a0d7 100644 --- a/arch/powerpc/platforms/powermac/cpufreq_32.c +++ b/arch/powerpc/platforms/powermac/cpufreq_32.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/pmac_cpufreq.c - * * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt * Copyright (C) 2004 John Steele Scott * diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c index 558dd069209..50ed8890dd3 100644 --- a/arch/powerpc/platforms/powermac/feature.c +++ b/arch/powerpc/platforms/powermac/feature.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/pmac_feature.c - * * Copyright (C) 1996-2001 Paul Mackerras (paulus@cs.anu.edu.au) * Ben. Herrenschmidt (benh@kernel.crashing.org) * diff --git a/arch/powerpc/platforms/powermac/nvram.c b/arch/powerpc/platforms/powermac/nvram.c index 3ebd045a335..5fd28995c74 100644 --- a/arch/powerpc/platforms/powermac/nvram.c +++ b/arch/powerpc/platforms/powermac/nvram.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/pmac_nvram.c - * * Copyright (C) 2002 Benjamin Herrenschmidt (benh@kernel.crashing.org) * * This program is free software; you can redistribute it and/or diff --git a/arch/powerpc/platforms/pseries/hvCall.S b/arch/powerpc/platforms/pseries/hvCall.S index 176e8da7646..db7c19fe929 100644 --- a/arch/powerpc/platforms/pseries/hvCall.S +++ b/arch/powerpc/platforms/pseries/hvCall.S @@ -1,6 +1,4 @@ /* - * arch/ppc64/kernel/pSeries_hvCall.S - * * This file contains the generic code to perform a call to the * pSeries LPAR hypervisor. * NOTE: this file will go away when we move to inline this work. diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index 48cfbfc43f9..57930e23cc7 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -1,6 +1,4 @@ /* - * arch/ppc64/kernel/pSeries_iommu.c - * * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation * * Rewrite, cleanup: diff --git a/arch/powerpc/platforms/pseries/pci.c b/arch/powerpc/platforms/pseries/pci.c index 999a9620b5c..946ad59e335 100644 --- a/arch/powerpc/platforms/pseries/pci.c +++ b/arch/powerpc/platforms/pseries/pci.c @@ -1,6 +1,4 @@ /* - * arch/ppc64/kernel/pSeries_pci.c - * * Copyright (C) 2001 Dave Engebretsen, IBM Corporation * Copyright (C) 2003 Anton Blanchard , IBM * diff --git a/arch/powerpc/sysdev/dcr.S b/arch/powerpc/sysdev/dcr.S index 895f10243a4..2078f39e2f1 100644 --- a/arch/powerpc/sysdev/dcr.S +++ b/arch/powerpc/sysdev/dcr.S @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/dcr.S - * * "Indirect" DCR access * * Copyright (c) 2004 Eugene Surovegin diff --git a/arch/powerpc/sysdev/ipic.h b/arch/powerpc/sysdev/ipic.h index a7ce7da8785..a60c9d18bb7 100644 --- a/arch/powerpc/sysdev/ipic.h +++ b/arch/powerpc/sysdev/ipic.h @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/ipic.h - * * IPIC private definitions and structure. * * Maintainer: Kumar Gala diff --git a/arch/ppc/4xx_io/serial_sicc.c b/arch/ppc/4xx_io/serial_sicc.c index 8ace2a1f3b4..4dc6aa2abfc 100644 --- a/arch/ppc/4xx_io/serial_sicc.c +++ b/arch/ppc/4xx_io/serial_sicc.c @@ -1,6 +1,4 @@ /* - * arch/ppc/4xx_io/serial_sicc.c - * * Driver for IBM STB3xxx SICC serial port * * Based on drivers/char/serial_amba.c, by ARM Ltd. diff --git a/arch/ppc/amiga/amiints.c b/arch/ppc/amiga/amiints.c index 5f35cf3986f..b2bba052ab9 100644 --- a/arch/ppc/amiga/amiints.c +++ b/arch/ppc/amiga/amiints.c @@ -1,5 +1,5 @@ /* - * arch/ppc/amiga/amiints.c -- Amiga Linux interrupt handling code + * Amiga Linux interrupt handling code * * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive diff --git a/arch/ppc/amiga/bootinfo.c b/arch/ppc/amiga/bootinfo.c index e2e965661d0..efd869a3ed9 100644 --- a/arch/ppc/amiga/bootinfo.c +++ b/arch/ppc/amiga/bootinfo.c @@ -1,6 +1,4 @@ /* - * arch/ppc/amiga/bootinfo.c - * * Extracted from arch/m68k/kernel/setup.c. * Should be properly generalized and put somewhere else. * Jesper diff --git a/arch/ppc/amiga/cia.c b/arch/ppc/amiga/cia.c index 4431c58f611..9558f2f40e6 100644 --- a/arch/ppc/amiga/cia.c +++ b/arch/ppc/amiga/cia.c @@ -1,6 +1,4 @@ /* - * arch/ppc/amiga/cia.c - CIA support - * * Copyright (C) 1996 Roman Zippel * * The concept of some functions bases on the original Amiga OS function diff --git a/arch/ppc/amiga/config.c b/arch/ppc/amiga/config.c index 60e2da1c92c..bbe47c9bd70 100644 --- a/arch/ppc/amiga/config.c +++ b/arch/ppc/amiga/config.c @@ -1,8 +1,6 @@ #define m68k_debug_device debug_device /* - * arch/ppc/amiga/config.c - * * Copyright (C) 1993 Hamish Macdonald * * This file is subject to the terms and conditions of the GNU General Public diff --git a/arch/ppc/amiga/ints.c b/arch/ppc/amiga/ints.c index 5d318e498f0..083a1746219 100644 --- a/arch/ppc/amiga/ints.c +++ b/arch/ppc/amiga/ints.c @@ -1,6 +1,4 @@ /* - * arch/ppc/amiga/ints.c - * * Linux/m68k general interrupt handling code from arch/m68k/kernel/ints.c * Needed to drive the m68k emulating IRQ hardware on the PowerUp boards. */ diff --git a/arch/ppc/boot/Makefile b/arch/ppc/boot/Makefile index efd8ce515d5..f565699a9fe 100644 --- a/arch/ppc/boot/Makefile +++ b/arch/ppc/boot/Makefile @@ -1,6 +1,3 @@ -# -# arch/ppc/boot/Makefile -# # This file is subject to the terms and conditions of the GNU General Public # License. See the file "COPYING" in the main directory of this archive # for more details. diff --git a/arch/ppc/boot/common/Makefile b/arch/ppc/boot/common/Makefile index f88d647d5dd..a2e85e3beb8 100644 --- a/arch/ppc/boot/common/Makefile +++ b/arch/ppc/boot/common/Makefile @@ -1,6 +1,3 @@ -# -# arch/ppc/boot/common/Makefile -# # This file is subject to the terms and conditions of the GNU General Public # License. See the file "COPYING" in the main directory of this archive # for more details. diff --git a/arch/ppc/boot/common/bootinfo.c b/arch/ppc/boot/common/bootinfo.c index 9c6e528940e..f4dc9b9fab9 100644 --- a/arch/ppc/boot/common/bootinfo.c +++ b/arch/ppc/boot/common/bootinfo.c @@ -1,6 +1,4 @@ /* - * arch/ppc/common/bootinfo.c - * * General bootinfo record utilities * Author: Randy Vinson * diff --git a/arch/ppc/boot/common/misc-common.c b/arch/ppc/boot/common/misc-common.c index e79e6b3f276..073830a8559 100644 --- a/arch/ppc/boot/common/misc-common.c +++ b/arch/ppc/boot/common/misc-common.c @@ -1,6 +1,4 @@ /* - * arch/ppc/boot/common/misc-common.c - * * Misc. bootloader code (almost) all platforms can use * * Author: Johnnie Peters diff --git a/arch/ppc/boot/common/serial_stub.c b/arch/ppc/boot/common/serial_stub.c index 03dfaa01fa6..5cc9ae66a8b 100644 --- a/arch/ppc/boot/common/serial_stub.c +++ b/arch/ppc/boot/common/serial_stub.c @@ -1,6 +1,4 @@ /* - * arch/ppc/boot/common/serial_stub.c - * * This is a few stub routines to make the boot code cleaner looking when * there is no serial port support doesn't need to be closed, for example. * diff --git a/arch/ppc/boot/common/util.S b/arch/ppc/boot/common/util.S index 368ec035e6c..0c5e43c4ae0 100644 --- a/arch/ppc/boot/common/util.S +++ b/arch/ppc/boot/common/util.S @@ -1,6 +1,4 @@ /* - * arch/ppc/boot/common/util.S - * * Useful bootup functions, which are more easily done in asm than C. * * NOTE: Be very very careful about the registers you use here. diff --git a/arch/ppc/boot/include/mpc10x.h b/arch/ppc/boot/include/mpc10x.h index 6cd40ecabc7..6e5d540d8d3 100644 --- a/arch/ppc/boot/include/mpc10x.h +++ b/arch/ppc/boot/include/mpc10x.h @@ -1,6 +1,4 @@ /* - * arch/ppc/boot/include/mpc10.h - * * Common defines for the Motorola SPS MPC106/8240/107 Host bridge/Mem * ctrl/EPIC/etc. * diff --git a/arch/ppc/boot/simple/cpc700_memory.c b/arch/ppc/boot/simple/cpc700_memory.c index 8c75cf6c238..d75420a45a5 100644 --- a/arch/ppc/boot/simple/cpc700_memory.c +++ b/arch/ppc/boot/simple/cpc700_memory.c @@ -1,6 +1,4 @@ /* - * arch/ppc/boot/common/cpc700_memory.c - * * Find memory based upon settings in the CPC700 bridge * * Author: Dan Cox diff --git a/arch/ppc/boot/simple/head.S b/arch/ppc/boot/simple/head.S index 119b9dc8958..160da1006ff 100644 --- a/arch/ppc/boot/simple/head.S +++ b/arch/ppc/boot/simple/head.S @@ -1,6 +1,4 @@ /* - * arch/ppc/boot/simple/head.S - * * Initial board bringup code for many different boards. * * Author: Tom Rini diff --git a/arch/ppc/boot/simple/misc-chestnut.c b/arch/ppc/boot/simple/misc-chestnut.c index 0dce7f3557e..b94e142ad89 100644 --- a/arch/ppc/boot/simple/misc-chestnut.c +++ b/arch/ppc/boot/simple/misc-chestnut.c @@ -1,6 +1,4 @@ /* - * arch/ppc/boot/simple/misc-chestnut.c - * * Setup for the IBM Chestnut (ibm-750fxgx_eval) * * Author: Mark A. Greer diff --git a/arch/ppc/boot/simple/misc-cpci690.c b/arch/ppc/boot/simple/misc-cpci690.c index 26860300fa0..8a8614d11a3 100644 --- a/arch/ppc/boot/simple/misc-cpci690.c +++ b/arch/ppc/boot/simple/misc-cpci690.c @@ -1,6 +1,4 @@ /* - * arch/ppc/boot/simple/misc-cpci690.c - * * Add birec data for Force CPCI690 board. * * Author: Mark A. Greer diff --git a/arch/ppc/boot/simple/misc-ev64260.c b/arch/ppc/boot/simple/misc-ev64260.c index 52ece6937a7..2678c224af2 100644 --- a/arch/ppc/boot/simple/misc-ev64260.c +++ b/arch/ppc/boot/simple/misc-ev64260.c @@ -1,6 +1,4 @@ /* - * arch/ppc/boot/simple/misc-ev64260.c - * * Host bridge init code for the Marvell/Galileo EV-64260-BP evaluation board * with a GT64260 onboard. * diff --git a/arch/ppc/boot/simple/misc-ev64360.c b/arch/ppc/boot/simple/misc-ev64360.c index cd1ccf2a158..a212b5b988c 100644 --- a/arch/ppc/boot/simple/misc-ev64360.c +++ b/arch/ppc/boot/simple/misc-ev64360.c @@ -1,5 +1,4 @@ /* - * arch/ppc/boot/simple/misc-ev64360.c * Copyright (C) 2005 Lee Nicks * * Based on arch/ppc/boot/simple/misc-katana.c from: diff --git a/arch/ppc/boot/simple/misc-katana.c b/arch/ppc/boot/simple/misc-katana.c index ec94a11baca..d97f2ee6f04 100644 --- a/arch/ppc/boot/simple/misc-katana.c +++ b/arch/ppc/boot/simple/misc-katana.c @@ -1,6 +1,4 @@ /* - * arch/ppc/boot/simple/misc-katana.c - * * Set up MPSC values to bootwrapper can prompt user. * * Author: Mark A. Greer diff --git a/arch/ppc/boot/simple/misc-mv64x60.c b/arch/ppc/boot/simple/misc-mv64x60.c index 258d4599fad..71ff20fd494 100644 --- a/arch/ppc/boot/simple/misc-mv64x60.c +++ b/arch/ppc/boot/simple/misc-mv64x60.c @@ -1,6 +1,4 @@ /* - * arch/ppc/boot/simple/misc-mv64x60.c - * * Relocate bridge's register base and call board specific routine. * * Author: Mark A. Greer diff --git a/arch/ppc/boot/simple/misc-prep.c b/arch/ppc/boot/simple/misc-prep.c index 75380ac4166..63def9d13d7 100644 --- a/arch/ppc/boot/simple/misc-prep.c +++ b/arch/ppc/boot/simple/misc-prep.c @@ -1,6 +1,4 @@ /* - * arch/ppc/boot/simple/misc-prep.c - * * Maintainer: Tom Rini * * In the past: Gary Thomas, Cort Dougan diff --git a/arch/ppc/boot/simple/misc-radstone_ppc7d.c b/arch/ppc/boot/simple/misc-radstone_ppc7d.c index 569e0d4feea..0f302ea9c3d 100644 --- a/arch/ppc/boot/simple/misc-radstone_ppc7d.c +++ b/arch/ppc/boot/simple/misc-radstone_ppc7d.c @@ -1,6 +1,4 @@ /* - * arch/ppc/boot/simple/misc-radstone_ppc7d.c - * * Misc data for Radstone PPC7D board. * * Author: James Chapman diff --git a/arch/ppc/boot/simple/misc-spruce.c b/arch/ppc/boot/simple/misc-spruce.c index d012c39278f..0cad2f557a1 100644 --- a/arch/ppc/boot/simple/misc-spruce.c +++ b/arch/ppc/boot/simple/misc-spruce.c @@ -1,6 +1,4 @@ /* - * arch/ppc/boot/spruce/misc.c - * * Misc. bootloader code for IBM Spruce reference platform * * Authors: Johnnie Peters diff --git a/arch/ppc/boot/simple/misc.c b/arch/ppc/boot/simple/misc.c index f415d6c6236..3d78571ad94 100644 --- a/arch/ppc/boot/simple/misc.c +++ b/arch/ppc/boot/simple/misc.c @@ -1,6 +1,4 @@ /* - * arch/ppc/simple/misc.c - * * Misc. bootloader code for many machines. This assumes you have are using * a 6xx/7xx/74xx CPU in your machine. This assumes the chunk of memory * below 8MB is free. Finally, it assumes you have a NS16550-style uart for diff --git a/arch/ppc/boot/simple/mpc10x_memory.c b/arch/ppc/boot/simple/mpc10x_memory.c index 20d92a34ceb..c24290823f7 100644 --- a/arch/ppc/boot/simple/mpc10x_memory.c +++ b/arch/ppc/boot/simple/mpc10x_memory.c @@ -1,6 +1,4 @@ /* - * arch/ppc/boot/common/mpc10x_common.c - * * A routine to find out how much memory the machine has. * * Based on: diff --git a/arch/ppc/boot/simple/mpc52xx_tty.c b/arch/ppc/boot/simple/mpc52xx_tty.c index 3acc6b7c072..1964493cf3b 100644 --- a/arch/ppc/boot/simple/mpc52xx_tty.c +++ b/arch/ppc/boot/simple/mpc52xx_tty.c @@ -1,6 +1,4 @@ /* - * arch/ppc/boot/simple/mpc52xx_tty.c - * * Minimal serial functions needed to send messages out a MPC52xx * Programmable Serial Controller (PSC). * diff --git a/arch/ppc/boot/simple/mv64x60_tty.c b/arch/ppc/boot/simple/mv64x60_tty.c index b9c24d4c738..0c52f5c784a 100644 --- a/arch/ppc/boot/simple/mv64x60_tty.c +++ b/arch/ppc/boot/simple/mv64x60_tty.c @@ -1,6 +1,4 @@ /* - * arch/ppc/boot/simple/mv64x60_tty.c - * * Bootloader version of the embedded MPSC/UART driver for the Marvell 64x60. * Note: Due to a GT64260A erratum, DMA will be used for UART input (via SDMA). * diff --git a/arch/ppc/boot/simple/openbios.c b/arch/ppc/boot/simple/openbios.c index 81f11d8b30a..3f2ed53f793 100644 --- a/arch/ppc/boot/simple/openbios.c +++ b/arch/ppc/boot/simple/openbios.c @@ -1,6 +1,4 @@ /* - * arch/ppc/boot/simple/openbios.c - * * Copyright (c) 2005 DENX Software Engineering * Stefan Roese * diff --git a/arch/ppc/boot/simple/relocate.S b/arch/ppc/boot/simple/relocate.S index 555a216ccc4..7efddc50756 100644 --- a/arch/ppc/boot/simple/relocate.S +++ b/arch/ppc/boot/simple/relocate.S @@ -1,6 +1,4 @@ /* - * arch/ppc/boot/simple/relocate.S - * * This is the common part of the loader relocation and initialization * process. All of the board/processor specific initialization is * done before we get here. diff --git a/arch/ppc/boot/utils/mkbugboot.c b/arch/ppc/boot/utils/mkbugboot.c index 886122283f3..29115e01f60 100644 --- a/arch/ppc/boot/utils/mkbugboot.c +++ b/arch/ppc/boot/utils/mkbugboot.c @@ -1,6 +1,4 @@ /* - * arch/ppc/boot/utils/mkbugboot.c - * * Makes a Motorola PPCBUG ROM bootable image which can be flashed * into one of the FLASH banks on a Motorola PowerPlus board. * diff --git a/arch/ppc/kernel/head_44x.S b/arch/ppc/kernel/head_44x.S index 677c571aa27..0d8b88219d3 100644 --- a/arch/ppc/kernel/head_44x.S +++ b/arch/ppc/kernel/head_44x.S @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/head_44x.S - * * Kernel execution entry point code. * * Copyright (c) 1995-1996 Gary Thomas diff --git a/arch/ppc/kernel/head_8xx.S b/arch/ppc/kernel/head_8xx.S index c1e89ad0684..ec53c7d65f2 100644 --- a/arch/ppc/kernel/head_8xx.S +++ b/arch/ppc/kernel/head_8xx.S @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/except_8xx.S - * * PowerPC version * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP diff --git a/arch/ppc/kernel/head_fsl_booke.S b/arch/ppc/kernel/head_fsl_booke.S index 0abd05f14f8..dd86bbed762 100644 --- a/arch/ppc/kernel/head_fsl_booke.S +++ b/arch/ppc/kernel/head_fsl_booke.S @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/head_fsl_booke.S - * * Kernel execution entry point code. * * Copyright (c) 1995-1996 Gary Thomas diff --git a/arch/ppc/kernel/traps.c b/arch/ppc/kernel/traps.c index 6d0a1838d94..1c0d68026ab 100644 --- a/arch/ppc/kernel/traps.c +++ b/arch/ppc/kernel/traps.c @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/traps.c - * * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) * * This program is free software; you can redistribute it and/or diff --git a/arch/ppc/lib/rheap.c b/arch/ppc/lib/rheap.c index 42c5de2c898..31e511856dc 100644 --- a/arch/ppc/lib/rheap.c +++ b/arch/ppc/lib/rheap.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/rheap.c - * * A Remote Heap. Remote means that we don't touch the memory that the * heap points to. Normal heap implementations use the memory they manage * to place their list. We cannot do that because the memory we manage may diff --git a/arch/ppc/math-emu/math.c b/arch/ppc/math-emu/math.c index b7dff53a710..58915347276 100644 --- a/arch/ppc/math-emu/math.c +++ b/arch/ppc/math-emu/math.c @@ -1,6 +1,4 @@ /* - * arch/ppc/math-emu/math.c - * * Copyright (C) 1999 Eddie C. Dost (ecd@atecom.com) */ diff --git a/arch/ppc/mm/fault.c b/arch/ppc/mm/fault.c index ee5e9f25baf..0217188ef46 100644 --- a/arch/ppc/mm/fault.c +++ b/arch/ppc/mm/fault.c @@ -1,6 +1,4 @@ /* - * arch/ppc/mm/fault.c - * * PowerPC version * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) * diff --git a/arch/ppc/mm/hashtable.S b/arch/ppc/mm/hashtable.S index 3ec87c91343..f09fa88db35 100644 --- a/arch/ppc/mm/hashtable.S +++ b/arch/ppc/mm/hashtable.S @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/hashtable.S - * * $Id: hashtable.S,v 1.6 1999/10/08 01:56:15 paulus Exp $ * * PowerPC version diff --git a/arch/ppc/platforms/4xx/bamboo.c b/arch/ppc/platforms/4xx/bamboo.c index 0ec53f04933..b940cfd646c 100644 --- a/arch/ppc/platforms/4xx/bamboo.c +++ b/arch/ppc/platforms/4xx/bamboo.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/bamboo.c - * * Bamboo board specific routines * * Wade Farnsworth diff --git a/arch/ppc/platforms/4xx/bamboo.h b/arch/ppc/platforms/4xx/bamboo.h index 5c019282649..31c0dd6a26c 100644 --- a/arch/ppc/platforms/4xx/bamboo.h +++ b/arch/ppc/platforms/4xx/bamboo.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/bamboo.h - * * Bamboo board definitions * * Wade Farnsworth diff --git a/arch/ppc/platforms/4xx/bubinga.h b/arch/ppc/platforms/4xx/bubinga.h index b5380cfaf5c..606aa9fa5ca 100644 --- a/arch/ppc/platforms/4xx/bubinga.h +++ b/arch/ppc/platforms/4xx/bubinga.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/bubinga.h - * * Bubinga board definitions * * Copyright (c) 2005 DENX Software Engineering diff --git a/arch/ppc/platforms/4xx/cpci405.c b/arch/ppc/platforms/4xx/cpci405.c index ff966773a0b..6571e39fbe4 100644 --- a/arch/ppc/platforms/4xx/cpci405.c +++ b/arch/ppc/platforms/4xx/cpci405.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/cpci405.c - * * Board setup routines for the esd CPCI-405 cPCI Board. * * Author: Stefan Roese diff --git a/arch/ppc/platforms/4xx/ebony.c b/arch/ppc/platforms/4xx/ebony.c index 9a828b62341..b4ecb9c7985 100644 --- a/arch/ppc/platforms/4xx/ebony.c +++ b/arch/ppc/platforms/4xx/ebony.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ebony.c - * * Ebony board specific routines * * Matt Porter diff --git a/arch/ppc/platforms/4xx/ebony.h b/arch/ppc/platforms/4xx/ebony.h index b91ad4272df..27b2e77c7c8 100644 --- a/arch/ppc/platforms/4xx/ebony.h +++ b/arch/ppc/platforms/4xx/ebony.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/ebony.h - * * Ebony board definitions * * Matt Porter diff --git a/arch/ppc/platforms/4xx/ep405.c b/arch/ppc/platforms/4xx/ep405.c index 26a07cdb30e..6efa91ff9c0 100644 --- a/arch/ppc/platforms/4xx/ep405.c +++ b/arch/ppc/platforms/4xx/ep405.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ep405.c - * * Embedded Planet 405GP board * http://www.embeddedplanet.com * diff --git a/arch/ppc/platforms/4xx/ep405.h b/arch/ppc/platforms/4xx/ep405.h index ea3eb21338f..9814fc43172 100644 --- a/arch/ppc/platforms/4xx/ep405.h +++ b/arch/ppc/platforms/4xx/ep405.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ep405.h - * * Embedded Planet 405GP board * http://www.embeddedplanet.com * diff --git a/arch/ppc/platforms/4xx/ibm405ep.c b/arch/ppc/platforms/4xx/ibm405ep.c index 093b28d27a4..55af769a6e7 100644 --- a/arch/ppc/platforms/4xx/ibm405ep.c +++ b/arch/ppc/platforms/4xx/ibm405ep.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/ibm405ep.c - * * Support for IBM PPC 405EP processors. * * Author: SAW (IBM), derived from ibmnp405l.c. diff --git a/arch/ppc/platforms/4xx/ibm405ep.h b/arch/ppc/platforms/4xx/ibm405ep.h index e051e3fe8c6..fe46640de15 100644 --- a/arch/ppc/platforms/4xx/ibm405ep.h +++ b/arch/ppc/platforms/4xx/ibm405ep.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ibm405ep.h - * * IBM PPC 405EP processor defines. * * Author: SAW (IBM), derived from ibm405gp.h. diff --git a/arch/ppc/platforms/4xx/ibm405gp.h b/arch/ppc/platforms/4xx/ibm405gp.h index b2b642e81af..eaf0ef57028 100644 --- a/arch/ppc/platforms/4xx/ibm405gp.h +++ b/arch/ppc/platforms/4xx/ibm405gp.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ibm405gp.h - * * Author: Armin Kuster akuster@mvista.com * * 2001 (c) MontaVista, Software, Inc. This file is licensed under diff --git a/arch/ppc/platforms/4xx/ibm405gpr.c b/arch/ppc/platforms/4xx/ibm405gpr.c index cd0d00d8e8e..49da61f6854 100644 --- a/arch/ppc/platforms/4xx/ibm405gpr.c +++ b/arch/ppc/platforms/4xx/ibm405gpr.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ibm405gpr.c - * * Author: Armin Kuster * * 2002 (c) MontaVista, Software, Inc. This file is licensed under diff --git a/arch/ppc/platforms/4xx/ibm405gpr.h b/arch/ppc/platforms/4xx/ibm405gpr.h index 45412fb4368..e90c5dde01d 100644 --- a/arch/ppc/platforms/4xx/ibm405gpr.h +++ b/arch/ppc/platforms/4xx/ibm405gpr.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ibm405gpr.h - * * Author: Armin Kuster * * 2002 (c) MontaVista, Software, Inc. This file is licensed under diff --git a/arch/ppc/platforms/4xx/ibm440ep.c b/arch/ppc/platforms/4xx/ibm440ep.c index 65ac0b9c2d0..1fed6638c81 100644 --- a/arch/ppc/platforms/4xx/ibm440ep.c +++ b/arch/ppc/platforms/4xx/ibm440ep.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ibm440ep.c - * * PPC440EP I/O descriptions * * Wade Farnsworth diff --git a/arch/ppc/platforms/4xx/ibm440ep.h b/arch/ppc/platforms/4xx/ibm440ep.h index 97c80b8e3e1..61717e8a799 100644 --- a/arch/ppc/platforms/4xx/ibm440ep.h +++ b/arch/ppc/platforms/4xx/ibm440ep.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ibm440ep.h - * * PPC440EP definitions * * Wade Farnsworth diff --git a/arch/ppc/platforms/4xx/ibm440gp.c b/arch/ppc/platforms/4xx/ibm440gp.c index d926245e8b3..b67a72e5c6f 100644 --- a/arch/ppc/platforms/4xx/ibm440gp.c +++ b/arch/ppc/platforms/4xx/ibm440gp.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ibm440gp.c - * * PPC440GP I/O descriptions * * Matt Porter diff --git a/arch/ppc/platforms/4xx/ibm440gp.h b/arch/ppc/platforms/4xx/ibm440gp.h index ae1efc03b29..7b2763b6024 100644 --- a/arch/ppc/platforms/4xx/ibm440gp.h +++ b/arch/ppc/platforms/4xx/ibm440gp.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ibm440gp.h - * * PPC440GP definitions * * Roland Dreier diff --git a/arch/ppc/platforms/4xx/ibm440gx.c b/arch/ppc/platforms/4xx/ibm440gx.c index d24c09ee7b1..685abffcb6c 100644 --- a/arch/ppc/platforms/4xx/ibm440gx.c +++ b/arch/ppc/platforms/4xx/ibm440gx.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ibm440gx.c - * * PPC440GX I/O descriptions * * Matt Porter diff --git a/arch/ppc/platforms/4xx/ibm440gx.h b/arch/ppc/platforms/4xx/ibm440gx.h index 0b59d8dcd03..070a34efe1c 100644 --- a/arch/ppc/platforms/4xx/ibm440gx.h +++ b/arch/ppc/platforms/4xx/ibm440gx.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/ibm440gx.h - * * PPC440GX definitions * * Matt Porter diff --git a/arch/ppc/platforms/4xx/ibm440sp.c b/arch/ppc/platforms/4xx/ibm440sp.c index 71a0117d359..de8f7ac5623 100644 --- a/arch/ppc/platforms/4xx/ibm440sp.c +++ b/arch/ppc/platforms/4xx/ibm440sp.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ibm440sp.c - * * PPC440SP I/O descriptions * * Matt Porter diff --git a/arch/ppc/platforms/4xx/ibm440sp.h b/arch/ppc/platforms/4xx/ibm440sp.h index c71e46a18b9..77e8bb22c52 100644 --- a/arch/ppc/platforms/4xx/ibm440sp.h +++ b/arch/ppc/platforms/4xx/ibm440sp.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ibm440sp.h - * * PPC440SP definitions * * Matt Porter diff --git a/arch/ppc/platforms/4xx/ibmnp405h.c b/arch/ppc/platforms/4xx/ibmnp405h.c index a477a78f490..f1dcb0ac15b 100644 --- a/arch/ppc/platforms/4xx/ibmnp405h.c +++ b/arch/ppc/platforms/4xx/ibmnp405h.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ibmnp405h.c - * * Author: Armin Kuster * * 2000-2002 (c) MontaVista, Software, Inc. This file is licensed under diff --git a/arch/ppc/platforms/4xx/ibmnp405h.h b/arch/ppc/platforms/4xx/ibmnp405h.h index e2c2b06128c..2c683f6aaa6 100644 --- a/arch/ppc/platforms/4xx/ibmnp405h.h +++ b/arch/ppc/platforms/4xx/ibmnp405h.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ibmnp405h.h - * * Author: Armin Kuster * * 2002 (c) MontaVista, Software, Inc. This file is licensed under diff --git a/arch/ppc/platforms/4xx/ibmstb4.c b/arch/ppc/platforms/4xx/ibmstb4.c index 7e33bb63544..799a2eccccc 100644 --- a/arch/ppc/platforms/4xx/ibmstb4.c +++ b/arch/ppc/platforms/4xx/ibmstb4.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ibmstb4.c - * * Author: Armin Kuster * * 2000-2001 (c) MontaVista, Software, Inc. This file is licensed under diff --git a/arch/ppc/platforms/4xx/ibmstb4.h b/arch/ppc/platforms/4xx/ibmstb4.h index 9f21d4c88a3..9de42659735 100644 --- a/arch/ppc/platforms/4xx/ibmstb4.h +++ b/arch/ppc/platforms/4xx/ibmstb4.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ibmstb4.h - * * Author: Armin Kuster * * 2001 (c) MontaVista, Software, Inc. This file is licensed under diff --git a/arch/ppc/platforms/4xx/ibmstbx25.c b/arch/ppc/platforms/4xx/ibmstbx25.c index b895b9cca57..090ddcbecc5 100644 --- a/arch/ppc/platforms/4xx/ibmstbx25.c +++ b/arch/ppc/platforms/4xx/ibmstbx25.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ibmstbx25.c - * * Author: Armin Kuster * * 2000-2002 (c) MontaVista, Software, Inc. This file is licensed under diff --git a/arch/ppc/platforms/4xx/ibmstbx25.h b/arch/ppc/platforms/4xx/ibmstbx25.h index 9a2efc366e9..6884a49d348 100644 --- a/arch/ppc/platforms/4xx/ibmstbx25.h +++ b/arch/ppc/platforms/4xx/ibmstbx25.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ibmstbx25.h - * * Author: Armin Kuster * * 2002 (c) MontaVista, Software, Inc. This file is licensed under diff --git a/arch/ppc/platforms/4xx/luan.c b/arch/ppc/platforms/4xx/luan.c index 21d29132aeb..5c37de28e13 100644 --- a/arch/ppc/platforms/4xx/luan.c +++ b/arch/ppc/platforms/4xx/luan.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/luan.c - * * Luan board specific routines * * Matt Porter diff --git a/arch/ppc/platforms/4xx/luan.h b/arch/ppc/platforms/4xx/luan.h index bbe7d0766db..e0db6a810fe 100644 --- a/arch/ppc/platforms/4xx/luan.h +++ b/arch/ppc/platforms/4xx/luan.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/luan.h - * * Luan board definitions * * Matt Porter diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c index 4f355b6acab..f841972f1fa 100644 --- a/arch/ppc/platforms/4xx/ocotea.c +++ b/arch/ppc/platforms/4xx/ocotea.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ocotea.c - * * Ocotea board specific routines * * Matt Porter diff --git a/arch/ppc/platforms/4xx/ocotea.h b/arch/ppc/platforms/4xx/ocotea.h index 33251153ac5..7c799a9ff82 100644 --- a/arch/ppc/platforms/4xx/ocotea.h +++ b/arch/ppc/platforms/4xx/ocotea.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/ocotea.h - * * Ocotea board definitions * * Matt Porter diff --git a/arch/ppc/platforms/4xx/ppc440spe.c b/arch/ppc/platforms/4xx/ppc440spe.c index 6139a0b3393..1be5d1c8e26 100644 --- a/arch/ppc/platforms/4xx/ppc440spe.c +++ b/arch/ppc/platforms/4xx/ppc440spe.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ppc440spe.c - * * PPC440SPe I/O descriptions * * Roland Dreier diff --git a/arch/ppc/platforms/4xx/ppc440spe.h b/arch/ppc/platforms/4xx/ppc440spe.h index 2216846973b..d3a620ddcde 100644 --- a/arch/ppc/platforms/4xx/ppc440spe.h +++ b/arch/ppc/platforms/4xx/ppc440spe.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ibm440spe.h - * * PPC440SPe definitions * * Roland Dreier diff --git a/arch/ppc/platforms/4xx/redwood5.c b/arch/ppc/platforms/4xx/redwood5.c index 611ac861804..53da2b4f7c2 100644 --- a/arch/ppc/platforms/4xx/redwood5.c +++ b/arch/ppc/platforms/4xx/redwood5.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/redwood5.c - * * Support for the IBM redwood5 eval board file * * Author: Armin Kuster diff --git a/arch/ppc/platforms/4xx/redwood5.h b/arch/ppc/platforms/4xx/redwood5.h index 264e34fb3fb..49edd481897 100644 --- a/arch/ppc/platforms/4xx/redwood5.h +++ b/arch/ppc/platforms/4xx/redwood5.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/redwood5.h - * * Macros, definitions, and data structures specific to the IBM PowerPC * STB03xxx "Redwood" evaluation board. * diff --git a/arch/ppc/platforms/4xx/redwood6.c b/arch/ppc/platforms/4xx/redwood6.c index b1311669128..41b27d106fa 100644 --- a/arch/ppc/platforms/4xx/redwood6.c +++ b/arch/ppc/platforms/4xx/redwood6.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/redwood6.c - * * Author: Armin Kuster * * 2002 (c) MontaVista, Software, Inc. This file is licensed under diff --git a/arch/ppc/platforms/4xx/redwood6.h b/arch/ppc/platforms/4xx/redwood6.h index 1814b9f5fc3..1edcbe5c51c 100644 --- a/arch/ppc/platforms/4xx/redwood6.h +++ b/arch/ppc/platforms/4xx/redwood6.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/redwood6.h - * * Macros, definitions, and data structures specific to the IBM PowerPC * STBx25xx "Redwood6" evaluation board. * diff --git a/arch/ppc/platforms/4xx/sycamore.c b/arch/ppc/platforms/4xx/sycamore.c index 281b4a2ffb9..bab31eb3068 100644 --- a/arch/ppc/platforms/4xx/sycamore.c +++ b/arch/ppc/platforms/4xx/sycamore.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/sycamore.c - * * Architecture- / platform-specific boot-time initialization code for * IBM PowerPC 4xx based boards. * diff --git a/arch/ppc/platforms/4xx/sycamore.h b/arch/ppc/platforms/4xx/sycamore.h index 1cd6c824fd6..dae01620227 100644 --- a/arch/ppc/platforms/4xx/sycamore.h +++ b/arch/ppc/platforms/4xx/sycamore.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/sycamore.h - * * Sycamore board definitions * * Copyright (c) 2005 DENX Software Engineering diff --git a/arch/ppc/platforms/4xx/walnut.c b/arch/ppc/platforms/4xx/walnut.c index 74cb33182d9..6bd77902b9a 100644 --- a/arch/ppc/platforms/4xx/walnut.c +++ b/arch/ppc/platforms/4xx/walnut.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/walnut.c - * * Architecture- / platform-specific boot-time initialization code for * IBM PowerPC 4xx based boards. Adapted from original * code by Gary Thomas, Cort Dougan , and Dan Malek diff --git a/arch/ppc/platforms/4xx/walnut.h b/arch/ppc/platforms/4xx/walnut.h index dcf2691698c..f13a577f0a4 100644 --- a/arch/ppc/platforms/4xx/walnut.h +++ b/arch/ppc/platforms/4xx/walnut.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/walnut.h - * * Walnut board definitions * * Copyright (c) 2005 DENX Software Engineering diff --git a/arch/ppc/platforms/4xx/xilinx_ml300.c b/arch/ppc/platforms/4xx/xilinx_ml300.c index 267afb50607..d97a7f269f9 100644 --- a/arch/ppc/platforms/4xx/xilinx_ml300.c +++ b/arch/ppc/platforms/4xx/xilinx_ml300.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/xilinx_ml300.c - * * Xilinx ML300 evaluation board initialization * * Author: MontaVista Software, Inc. diff --git a/arch/ppc/platforms/4xx/xilinx_ml300.h b/arch/ppc/platforms/4xx/xilinx_ml300.h index ae8bf1353b0..3d57332ba82 100644 --- a/arch/ppc/platforms/4xx/xilinx_ml300.h +++ b/arch/ppc/platforms/4xx/xilinx_ml300.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/xilinx_ml300.h - * * Include file that defines the Xilinx ML300 evaluation board * * Author: MontaVista Software, Inc. diff --git a/arch/ppc/platforms/4xx/yucca.c b/arch/ppc/platforms/4xx/yucca.c index b065b8babcd..f287dcdbffc 100644 --- a/arch/ppc/platforms/4xx/yucca.c +++ b/arch/ppc/platforms/4xx/yucca.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/yucca.c - * * Yucca board specific routines * * Roland Dreier (based on luan.c by Matt Porter) diff --git a/arch/ppc/platforms/4xx/yucca.h b/arch/ppc/platforms/4xx/yucca.h index 01a4afea151..7ae23012237 100644 --- a/arch/ppc/platforms/4xx/yucca.h +++ b/arch/ppc/platforms/4xx/yucca.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/yucca.h - * * Yucca board definitions * * Roland Dreier (based on luan.h by Matt Porter) diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.c b/arch/ppc/platforms/83xx/mpc834x_sys.c index 1a659bbc186..11626dd9090 100644 --- a/arch/ppc/platforms/83xx/mpc834x_sys.c +++ b/arch/ppc/platforms/83xx/mpc834x_sys.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/83xx/mpc834x_sys.c - * * MPC834x SYS board specific routines * * Maintainer: Kumar Gala diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.h b/arch/ppc/platforms/83xx/mpc834x_sys.h index 2e514d316fb..aa86c22cdd2 100644 --- a/arch/ppc/platforms/83xx/mpc834x_sys.h +++ b/arch/ppc/platforms/83xx/mpc834x_sys.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/83xx/mpc834x_sys.h - * * MPC834X SYS common board definitions * * Maintainer: Kumar Gala diff --git a/arch/ppc/platforms/85xx/mpc8540_ads.c b/arch/ppc/platforms/85xx/mpc8540_ads.c index 408d64f18e1..9b014df516b 100644 --- a/arch/ppc/platforms/85xx/mpc8540_ads.c +++ b/arch/ppc/platforms/85xx/mpc8540_ads.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/85xx/mpc8540_ads.c - * * MPC8540ADS board specific routines * * Maintainer: Kumar Gala diff --git a/arch/ppc/platforms/85xx/mpc8540_ads.h b/arch/ppc/platforms/85xx/mpc8540_ads.h index e48ca3a9739..0b5e7ff856f 100644 --- a/arch/ppc/platforms/85xx/mpc8540_ads.h +++ b/arch/ppc/platforms/85xx/mpc8540_ads.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/85xx/mpc8540_ads.h - * * MPC8540ADS board definitions * * Maintainer: Kumar Gala diff --git a/arch/ppc/platforms/85xx/mpc8555_cds.h b/arch/ppc/platforms/85xx/mpc8555_cds.h index 1a8e6c67355..9754dbd5d18 100644 --- a/arch/ppc/platforms/85xx/mpc8555_cds.h +++ b/arch/ppc/platforms/85xx/mpc8555_cds.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/mpc8555_cds.h - * * MPC8555CDS board definitions * * Maintainer: Kumar Gala diff --git a/arch/ppc/platforms/85xx/mpc8560_ads.c b/arch/ppc/platforms/85xx/mpc8560_ads.c index 442c7ff195d..0cb2e86470e 100644 --- a/arch/ppc/platforms/85xx/mpc8560_ads.c +++ b/arch/ppc/platforms/85xx/mpc8560_ads.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/85xx/mpc8560_ads.c - * * MPC8560ADS board specific routines * * Maintainer: Kumar Gala diff --git a/arch/ppc/platforms/85xx/mpc8560_ads.h b/arch/ppc/platforms/85xx/mpc8560_ads.h index 143ae7eefa7..c2247c21fc5 100644 --- a/arch/ppc/platforms/85xx/mpc8560_ads.h +++ b/arch/ppc/platforms/85xx/mpc8560_ads.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/mpc8560_ads.h - * * MPC8540ADS board definitions * * Maintainer: Kumar Gala diff --git a/arch/ppc/platforms/85xx/mpc85xx_ads_common.c b/arch/ppc/platforms/85xx/mpc85xx_ads_common.c index 17ce48fe350..8fd9d763f58 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_ads_common.c +++ b/arch/ppc/platforms/85xx/mpc85xx_ads_common.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/85xx/mpc85xx_ads_common.c - * * MPC85xx ADS board common routines * * Maintainer: Kumar Gala diff --git a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h b/arch/ppc/platforms/85xx/mpc85xx_ads_common.h index 198a6a02cde..de8d41aafe1 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h +++ b/arch/ppc/platforms/85xx/mpc85xx_ads_common.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/85xx/mpc85xx_ads_common.h - * * MPC85XX ADS common board definitions * * Maintainer: Kumar Gala diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c index 1801ab392e2..c9e0aeeca3d 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c +++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platform/85xx/mpc85xx_cds_common.c - * * MPC85xx CDS board specific routines * * Maintainer: Kumar Gala diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.h b/arch/ppc/platforms/85xx/mpc85xx_cds_common.h index 5b588cfd0e4..62df54f61ae 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.h +++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/85xx/mpc85xx_cds_common.h - * * MPC85xx CDS board definitions * * Maintainer: Kumar Gala diff --git a/arch/ppc/platforms/85xx/sbc8560.c b/arch/ppc/platforms/85xx/sbc8560.c index 8a72221f816..b73778ecf82 100644 --- a/arch/ppc/platforms/85xx/sbc8560.c +++ b/arch/ppc/platforms/85xx/sbc8560.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/85xx/sbc8560.c - * * Wind River SBC8560 board specific routines * * Maintainer: Kumar Gala diff --git a/arch/ppc/platforms/85xx/sbc8560.h b/arch/ppc/platforms/85xx/sbc8560.h index 5e1b00c77da..44ffaa2d2c8 100644 --- a/arch/ppc/platforms/85xx/sbc8560.h +++ b/arch/ppc/platforms/85xx/sbc8560.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/85xx/sbc8560.h - * * Wind River SBC8560 board definitions * * Copyright 2003 Motorola Inc. diff --git a/arch/ppc/platforms/85xx/sbc85xx.c b/arch/ppc/platforms/85xx/sbc85xx.c index c02f110219f..d3ff280510f 100644 --- a/arch/ppc/platforms/85xx/sbc85xx.c +++ b/arch/ppc/platforms/85xx/sbc85xx.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platform/85xx/sbc85xx.c - * * WindRiver PowerQUICC III SBC85xx board common routines * * Copyright 2002, 2003 Motorola Inc. diff --git a/arch/ppc/platforms/85xx/sbc85xx.h b/arch/ppc/platforms/85xx/sbc85xx.h index 7af93c691a6..5dd8b6a98c9 100644 --- a/arch/ppc/platforms/85xx/sbc85xx.h +++ b/arch/ppc/platforms/85xx/sbc85xx.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/85xx/sbc85xx.h - * * WindRiver PowerQUICC III SBC85xx common board definitions * * Copyright 2003 Motorola Inc. diff --git a/arch/ppc/platforms/85xx/stx_gp3.c b/arch/ppc/platforms/85xx/stx_gp3.c index 061bb7cf2d9..8d7baa9a397 100644 --- a/arch/ppc/platforms/85xx/stx_gp3.c +++ b/arch/ppc/platforms/85xx/stx_gp3.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/85xx/stx_gp3.c - * * STx GP3 board specific routines * * Dan Malek diff --git a/arch/ppc/platforms/85xx/stx_gp3.h b/arch/ppc/platforms/85xx/stx_gp3.h index 2f25b519515..3f71f8f5937 100644 --- a/arch/ppc/platforms/85xx/stx_gp3.h +++ b/arch/ppc/platforms/85xx/stx_gp3.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/stx8560_gp3.h - * * STx GP3 board definitions * * Dan Malek (dan@embeddededge.com) diff --git a/arch/ppc/platforms/85xx/tqm85xx.c b/arch/ppc/platforms/85xx/tqm85xx.c index a5e38ba6273..00af132262b 100644 --- a/arch/ppc/platforms/85xx/tqm85xx.c +++ b/arch/ppc/platforms/85xx/tqm85xx.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/85xx/tqm85xx.c - * * TQM85xx (40/41/55/60) board specific routines * * Copyright (c) 2005 DENX Software Engineering diff --git a/arch/ppc/platforms/85xx/tqm85xx.h b/arch/ppc/platforms/85xx/tqm85xx.h index 3775eb363fd..612d80504f9 100644 --- a/arch/ppc/platforms/85xx/tqm85xx.h +++ b/arch/ppc/platforms/85xx/tqm85xx.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/85xx/tqm85xx.h - * * TQM85xx (40/41/55/60) board definitions * * Copyright (c) 2005 DENX Software Engineering diff --git a/arch/ppc/platforms/apus_setup.c b/arch/ppc/platforms/apus_setup.c index c42c50073da..fe0cdc04d43 100644 --- a/arch/ppc/platforms/apus_setup.c +++ b/arch/ppc/platforms/apus_setup.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/apus_setup.c - * * Copyright (C) 1998, 1999 Jesper Skov * * Basically what is needed to replace functionality found in diff --git a/arch/ppc/platforms/chestnut.c b/arch/ppc/platforms/chestnut.c index aefcc0e7be5..f324f757cae 100644 --- a/arch/ppc/platforms/chestnut.c +++ b/arch/ppc/platforms/chestnut.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/chestnut.c - * * Board setup routines for IBM Chestnut * * Author: diff --git a/arch/ppc/platforms/chestnut.h b/arch/ppc/platforms/chestnut.h index 0400b2be40a..e00fd9f8bbd 100644 --- a/arch/ppc/platforms/chestnut.h +++ b/arch/ppc/platforms/chestnut.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/chestnut.h - * * Definitions for IBM 750FXGX Eval (Chestnut) * * Author: diff --git a/arch/ppc/platforms/chrp_pegasos_eth.c b/arch/ppc/platforms/chrp_pegasos_eth.c index 108a6e26518..9305c8aa137 100644 --- a/arch/ppc/platforms/chrp_pegasos_eth.c +++ b/arch/ppc/platforms/chrp_pegasos_eth.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/chrp_pegasos_eth.c - * * Copyright (C) 2005 Sven Luther * Thanks to : * Dale Farnsworth diff --git a/arch/ppc/platforms/chrp_setup.c b/arch/ppc/platforms/chrp_setup.c index 48996b78737..f9fd3f4f8e2 100644 --- a/arch/ppc/platforms/chrp_setup.c +++ b/arch/ppc/platforms/chrp_setup.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/setup.c - * * Copyright (C) 1995 Linus Torvalds * Adapted from 'alpha' version by Gary Thomas * Modified by Cort Dougan (cort@cs.nmt.edu) diff --git a/arch/ppc/platforms/chrp_time.c b/arch/ppc/platforms/chrp_time.c index 57753a55b58..c8627770af1 100644 --- a/arch/ppc/platforms/chrp_time.c +++ b/arch/ppc/platforms/chrp_time.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/chrp_time.c - * * Copyright (C) 1991, 1992, 1995 Linus Torvalds * * Adapted for PowerPC (PReP) by Gary Thomas diff --git a/arch/ppc/platforms/cpci690.c b/arch/ppc/platforms/cpci690.c index 6ca7bcac947..55be550a081 100644 --- a/arch/ppc/platforms/cpci690.c +++ b/arch/ppc/platforms/cpci690.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/cpci690.c - * * Board setup routines for the Force CPCI690 board. * * Author: Mark A. Greer diff --git a/arch/ppc/platforms/cpci690.h b/arch/ppc/platforms/cpci690.h index 49584c9cedf..0fa5a4c31b6 100644 --- a/arch/ppc/platforms/cpci690.h +++ b/arch/ppc/platforms/cpci690.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/cpci690.h - * * Definitions for Force CPCI690 * * Author: Mark A. Greer diff --git a/arch/ppc/platforms/ev64260.c b/arch/ppc/platforms/ev64260.c index ffde8f6f630..6444760caa3 100644 --- a/arch/ppc/platforms/ev64260.c +++ b/arch/ppc/platforms/ev64260.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/ev64260.c - * * Board setup routines for the Marvell/Galileo EV-64260-BP Evaluation Board. * * Author: Mark A. Greer diff --git a/arch/ppc/platforms/ev64260.h b/arch/ppc/platforms/ev64260.h index bedffced3a0..44d90d56745 100644 --- a/arch/ppc/platforms/ev64260.h +++ b/arch/ppc/platforms/ev64260.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/ev64260.h - * * Definitions for Marvell/Galileo EV-64260-BP Evaluation Board. * * Author: Mark A. Greer diff --git a/arch/ppc/platforms/ev64360.c b/arch/ppc/platforms/ev64360.c index b9d844f88c2..b5f52eba4fc 100644 --- a/arch/ppc/platforms/ev64360.c +++ b/arch/ppc/platforms/ev64360.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/ev64360.c - * * Board setup routines for the Marvell EV-64360-BP Evaluation Board. * * Author: Lee Nicks diff --git a/arch/ppc/platforms/ev64360.h b/arch/ppc/platforms/ev64360.h index 68eabe49039..b30f4722690 100644 --- a/arch/ppc/platforms/ev64360.h +++ b/arch/ppc/platforms/ev64360.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/ev64360.h - * * Definitions for Marvell EV-64360-BP Evaluation Board. * * Author: Lee Nicks diff --git a/arch/ppc/platforms/gemini.h b/arch/ppc/platforms/gemini.h index 06de5924891..5528fd0a121 100644 --- a/arch/ppc/platforms/gemini.h +++ b/arch/ppc/platforms/gemini.h @@ -1,7 +1,4 @@ /* - * arch/ppc/platforms/gemini.h - * - * * Onboard registers and descriptions for Synergy Microsystems' * "Gemini" boards. * diff --git a/arch/ppc/platforms/gemini_prom.S b/arch/ppc/platforms/gemini_prom.S index 8c5065d5650..b181f210800 100644 --- a/arch/ppc/platforms/gemini_prom.S +++ b/arch/ppc/platforms/gemini_prom.S @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/gemini_prom.S - * * Not really prom support code (yet), but sort of anti-prom code. The current * bootloader does a number of things it shouldn't and doesn't do things that it * should. The stuff in here is mainly a hodge-podge collection of setup code diff --git a/arch/ppc/platforms/gemini_setup.c b/arch/ppc/platforms/gemini_setup.c index 729897c5903..0090ff15460 100644 --- a/arch/ppc/platforms/gemini_setup.c +++ b/arch/ppc/platforms/gemini_setup.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/gemini_setup.c - * * Copyright (C) 1995 Linus Torvalds * Adapted from 'alpha' version by Gary Thomas * Modified by Cort Dougan (cort@cs.nmt.edu) diff --git a/arch/ppc/platforms/hdpu.c b/arch/ppc/platforms/hdpu.c index 50039a204c2..220674d883d 100644 --- a/arch/ppc/platforms/hdpu.c +++ b/arch/ppc/platforms/hdpu.c @@ -1,7 +1,4 @@ - /* - * arch/ppc/platforms/hdpu_setup.c - * * Board setup routines for the Sky Computers HDPU Compute Blade. * * Written by Brian Waite diff --git a/arch/ppc/platforms/hdpu.h b/arch/ppc/platforms/hdpu.h index 07c3cffb5c7..f9e020b6970 100644 --- a/arch/ppc/platforms/hdpu.h +++ b/arch/ppc/platforms/hdpu.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/hdpu.h - * * Definitions for Sky Computers HDPU board. * * Brian Waite diff --git a/arch/ppc/platforms/katana.c b/arch/ppc/platforms/katana.c index 6e58e30ceed..d2766617c3c 100644 --- a/arch/ppc/platforms/katana.c +++ b/arch/ppc/platforms/katana.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/katana.c - * * Board setup routines for the Artesyn Katana cPCI boards. * * Author: Tim Montgomery diff --git a/arch/ppc/platforms/katana.h b/arch/ppc/platforms/katana.h index 597257eff2e..0a9b036526b 100644 --- a/arch/ppc/platforms/katana.h +++ b/arch/ppc/platforms/katana.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/katana.h - * * Definitions for Artesyn Katana750i/3750 board. * * Author: Tim Montgomery diff --git a/arch/ppc/platforms/lite5200.c b/arch/ppc/platforms/lite5200.c index 7ed52dc340c..5171b53bccb 100644 --- a/arch/ppc/platforms/lite5200.c +++ b/arch/ppc/platforms/lite5200.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/lite5200.c - * * Platform support file for the Freescale LITE5200 based on MPC52xx. * A maximum of this file should be moved to syslib/mpc52xx_????? * so that new platform based on MPC52xx need a minimal platform file diff --git a/arch/ppc/platforms/lite5200.h b/arch/ppc/platforms/lite5200.h index c1de2aa4717..852a18e24d0 100644 --- a/arch/ppc/platforms/lite5200.h +++ b/arch/ppc/platforms/lite5200.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/lite5200.h - * * Definitions for Freescale LITE5200 : MPC52xx Standard Development * Platform board support * diff --git a/arch/ppc/platforms/lopec.c b/arch/ppc/platforms/lopec.c index 06d247c23b8..c6445a727ca 100644 --- a/arch/ppc/platforms/lopec.c +++ b/arch/ppc/platforms/lopec.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/lopec.c - * * Setup routines for the Motorola LoPEC. * * Author: Dan Cox diff --git a/arch/ppc/platforms/mvme5100.c b/arch/ppc/platforms/mvme5100.c index 108eb182ddd..c717cd92c02 100644 --- a/arch/ppc/platforms/mvme5100.c +++ b/arch/ppc/platforms/mvme5100.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/mvme5100.c - * * Board setup routines for the Motorola MVME5100. * * Author: Matt Porter diff --git a/arch/ppc/platforms/pal4.h b/arch/ppc/platforms/pal4.h index 641a11a3165..8569c423d88 100644 --- a/arch/ppc/platforms/pal4.h +++ b/arch/ppc/platforms/pal4.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/pal4.h - * * Definitions for SBS Palomar IV board * * Author: Dan Cox diff --git a/arch/ppc/platforms/pal4_pci.c b/arch/ppc/platforms/pal4_pci.c index c3b1b757a48..d81ae1c7e1c 100644 --- a/arch/ppc/platforms/pal4_pci.c +++ b/arch/ppc/platforms/pal4_pci.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/pal4_pci.c - * * PCI support for SBS Palomar IV * * Author: Dan Cox diff --git a/arch/ppc/platforms/pal4_serial.h b/arch/ppc/platforms/pal4_serial.h index a715c66e1ad..a75343224cf 100644 --- a/arch/ppc/platforms/pal4_serial.h +++ b/arch/ppc/platforms/pal4_serial.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/pal4_serial.h - * * Definitions for SBS PalomarIV serial support * * Author: Dan Cox diff --git a/arch/ppc/platforms/pal4_setup.c b/arch/ppc/platforms/pal4_setup.c index f93a3f87193..3c3d881df00 100644 --- a/arch/ppc/platforms/pal4_setup.c +++ b/arch/ppc/platforms/pal4_setup.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/pal4_setup.c - * * Board setup routines for the SBS PalomarIV. * * Author: Dan Cox diff --git a/arch/ppc/platforms/powerpmc250.c b/arch/ppc/platforms/powerpmc250.c index e6b520e6e13..c3a86be11fb 100644 --- a/arch/ppc/platforms/powerpmc250.c +++ b/arch/ppc/platforms/powerpmc250.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/powerpmc250.c - * * Board setup routines for Force PowerPMC-250 Processor PMC * * Author: Troy Benjegerdes diff --git a/arch/ppc/platforms/pplus.c b/arch/ppc/platforms/pplus.c index 22bd40cfb09..de2761ebe0d 100644 --- a/arch/ppc/platforms/pplus.c +++ b/arch/ppc/platforms/pplus.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/pplus.c - * * Board and PCI setup routines for MCG PowerPlus * * Author: Randy Vinson diff --git a/arch/ppc/platforms/pplus.h b/arch/ppc/platforms/pplus.h index 90f0cb2d409..a07cbbdd72c 100644 --- a/arch/ppc/platforms/pplus.h +++ b/arch/ppc/platforms/pplus.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/pplus.h - * * Definitions for Motorola MCG Falcon/Raven & HAWK North Bridge & Memory ctlr. * * Author: Mark A. Greerinclude/asm-ppc/hawk.h diff --git a/arch/ppc/platforms/pq2ads.c b/arch/ppc/platforms/pq2ads.c index 71c9fca1fe9..3365fd788a7 100644 --- a/arch/ppc/platforms/pq2ads.c +++ b/arch/ppc/platforms/pq2ads.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/pq2ads.c - * * PQ2ADS platform support * * Author: Kumar Gala diff --git a/arch/ppc/platforms/prep_setup.c b/arch/ppc/platforms/prep_setup.c index d0653580200..a0fc628ffb1 100644 --- a/arch/ppc/platforms/prep_setup.c +++ b/arch/ppc/platforms/prep_setup.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/setup.c - * * Copyright (C) 1995 Linus Torvalds * Adapted from 'alpha' version by Gary Thomas * Modified by Cort Dougan (cort@cs.nmt.edu) diff --git a/arch/ppc/platforms/prpmc750.c b/arch/ppc/platforms/prpmc750.c index 0bb14a5e824..cdd9cfb13ee 100644 --- a/arch/ppc/platforms/prpmc750.c +++ b/arch/ppc/platforms/prpmc750.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/prpmc750_setup.c - * * Board setup routines for Motorola PrPMC750 * * Author: Matt Porter diff --git a/arch/ppc/platforms/prpmc800.c b/arch/ppc/platforms/prpmc800.c index de7baefacd3..e459a199fb1 100644 --- a/arch/ppc/platforms/prpmc800.c +++ b/arch/ppc/platforms/prpmc800.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/prpmc800.c - * * Author: Dale Farnsworth * * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under diff --git a/arch/ppc/platforms/radstone_ppc7d.c b/arch/ppc/platforms/radstone_ppc7d.c index 872c0a3ba3c..1b1e7c5ef15 100644 --- a/arch/ppc/platforms/radstone_ppc7d.c +++ b/arch/ppc/platforms/radstone_ppc7d.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/radstone_ppc7d.c - * * Board setup routines for the Radstone PPC7D boards. * * Author: James Chapman diff --git a/arch/ppc/platforms/radstone_ppc7d.h b/arch/ppc/platforms/radstone_ppc7d.h index 938375510be..2bb093a0c03 100644 --- a/arch/ppc/platforms/radstone_ppc7d.h +++ b/arch/ppc/platforms/radstone_ppc7d.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/radstone_ppc7d.h - * * Board definitions for the Radstone PPC7D boards. * * Author: James Chapman diff --git a/arch/ppc/platforms/sandpoint.c b/arch/ppc/platforms/sandpoint.c index 9eeed357230..6dc459decb2 100644 --- a/arch/ppc/platforms/sandpoint.c +++ b/arch/ppc/platforms/sandpoint.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/sandpoint_setup.c - * * Board setup routines for the Motorola SPS Sandpoint Test Platform. * * Author: Mark A. Greer diff --git a/arch/ppc/platforms/sandpoint.h b/arch/ppc/platforms/sandpoint.h index f4e982cb69d..3b64e641848 100644 --- a/arch/ppc/platforms/sandpoint.h +++ b/arch/ppc/platforms/sandpoint.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/sandpoint.h - * * Definitions for Motorola SPS Sandpoint Test Platform * * Author: Mark A. Greer diff --git a/arch/ppc/platforms/sbc82xx.c b/arch/ppc/platforms/sbc82xx.c index 74c9ff72c3d..866807b4ad0 100644 --- a/arch/ppc/platforms/sbc82xx.c +++ b/arch/ppc/platforms/sbc82xx.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/sbc82xx.c - * * SBC82XX platform support * * Author: Guy Streeter diff --git a/arch/ppc/platforms/spruce.c b/arch/ppc/platforms/spruce.c index 69e1de7971f..3783deccd9b 100644 --- a/arch/ppc/platforms/spruce.c +++ b/arch/ppc/platforms/spruce.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/spruce.c - * * Board and PCI setup routines for IBM Spruce * * Author: MontaVista Software diff --git a/arch/ppc/platforms/tqm8260_setup.c b/arch/ppc/platforms/tqm8260_setup.c index 3409139330b..b766339f44a 100644 --- a/arch/ppc/platforms/tqm8260_setup.c +++ b/arch/ppc/platforms/tqm8260_setup.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/tqm8260_setup.c - * * TQM8260 platform support * * Author: Allen Curtis diff --git a/arch/ppc/syslib/cpc700.h b/arch/ppc/syslib/cpc700.h index f2c00253101..0a8a5d84390 100644 --- a/arch/ppc/syslib/cpc700.h +++ b/arch/ppc/syslib/cpc700.h @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/cpc700.h - * * Header file for IBM CPC700 Host Bridge, et. al. * * Author: Mark A. Greer diff --git a/arch/ppc/syslib/cpc700_pic.c b/arch/ppc/syslib/cpc700_pic.c index 75fe8eb1069..5add0a919ef 100644 --- a/arch/ppc/syslib/cpc700_pic.c +++ b/arch/ppc/syslib/cpc700_pic.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/cpc700_pic.c - * * Interrupt controller support for IBM Spruce * * Authors: Mark Greer, Matt Porter, and Johnnie Peters diff --git a/arch/ppc/syslib/cpc710.h b/arch/ppc/syslib/cpc710.h index cc0afd80402..5299bf8b5d0 100644 --- a/arch/ppc/syslib/cpc710.h +++ b/arch/ppc/syslib/cpc710.h @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/cpc710.h - * * Definitions for the IBM CPC710 PCI Host Bridge * * Author: Matt Porter diff --git a/arch/ppc/syslib/gen550.h b/arch/ppc/syslib/gen550.h index 039d249e19a..5254d3cdbca 100644 --- a/arch/ppc/syslib/gen550.h +++ b/arch/ppc/syslib/gen550.h @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/gen550.h - * * gen550 prototypes * * Matt Porter diff --git a/arch/ppc/syslib/gen550_dbg.c b/arch/ppc/syslib/gen550_dbg.c index 9ef0113c83d..9fcff74bfdd 100644 --- a/arch/ppc/syslib/gen550_dbg.c +++ b/arch/ppc/syslib/gen550_dbg.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/gen550_dbg.c - * * A library of polled 16550 serial routines. These are intended to * be used to support progress messages, xmon, kgdb, etc. on a * variety of platforms. diff --git a/arch/ppc/syslib/gen550_kgdb.c b/arch/ppc/syslib/gen550_kgdb.c index 7239d5d7ddc..874078a7664 100644 --- a/arch/ppc/syslib/gen550_kgdb.c +++ b/arch/ppc/syslib/gen550_kgdb.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/gen550_kgdb.c - * * Generic 16550 kgdb support intended to be useful on a variety * of platforms. To enable this support, it is necessary to set * the CONFIG_GEN550 option. Any virtual mapping of the serial diff --git a/arch/ppc/syslib/gt64260_pic.c b/arch/ppc/syslib/gt64260_pic.c index f97b3a9abd1..dc3bd9ecbbf 100644 --- a/arch/ppc/syslib/gt64260_pic.c +++ b/arch/ppc/syslib/gt64260_pic.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/gt64260_pic.c - * * Interrupt controller support for Galileo's GT64260. * * Author: Chris Zankel diff --git a/arch/ppc/syslib/harrier.c b/arch/ppc/syslib/harrier.c index a6b3f864579..c1583f48832 100644 --- a/arch/ppc/syslib/harrier.c +++ b/arch/ppc/syslib/harrier.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/harrier.c - * * Motorola MCG Harrier northbridge/memory controller support * * Author: Dale Farnsworth diff --git a/arch/ppc/syslib/hawk_common.c b/arch/ppc/syslib/hawk_common.c index a9911dc3a82..c5bf16b0d6a 100644 --- a/arch/ppc/syslib/hawk_common.c +++ b/arch/ppc/syslib/hawk_common.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/hawk_common.c - * * Common Motorola PowerPlus Platform--really Falcon/Raven or HAWK. * * Author: Mark A. Greer diff --git a/arch/ppc/syslib/ibm440gp_common.c b/arch/ppc/syslib/ibm440gp_common.c index 0d6be2d6dd6..fbaae5f6d83 100644 --- a/arch/ppc/syslib/ibm440gp_common.c +++ b/arch/ppc/syslib/ibm440gp_common.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/ibm440gp_common.c - * * PPC440GP system library * * Matt Porter diff --git a/arch/ppc/syslib/ibm440gp_common.h b/arch/ppc/syslib/ibm440gp_common.h index a054d83cb1a..f48529f3c23 100644 --- a/arch/ppc/syslib/ibm440gp_common.h +++ b/arch/ppc/syslib/ibm440gp_common.h @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/ibm440gp_common.h - * * PPC440GP system library * * Eugene Surovegin or diff --git a/arch/ppc/syslib/ibm440gx_common.c b/arch/ppc/syslib/ibm440gx_common.c index c36db279b43..a7dd55f1c63 100644 --- a/arch/ppc/syslib/ibm440gx_common.c +++ b/arch/ppc/syslib/ibm440gx_common.c @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/ibm440gx_common.c - * * PPC440GX system library * * Eugene Surovegin or diff --git a/arch/ppc/syslib/ibm440gx_common.h b/arch/ppc/syslib/ibm440gx_common.h index e73aa0411d3..a2ab9fab8e3 100644 --- a/arch/ppc/syslib/ibm440gx_common.h +++ b/arch/ppc/syslib/ibm440gx_common.h @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/ibm440gx_common.h - * * PPC440GX system library * * Eugene Surovegin or diff --git a/arch/ppc/syslib/ibm440sp_common.c b/arch/ppc/syslib/ibm440sp_common.c index cdafda127d8..293e4138d17 100644 --- a/arch/ppc/syslib/ibm440sp_common.c +++ b/arch/ppc/syslib/ibm440sp_common.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/ibm440sp_common.c - * * PPC440SP/PPC440SPe system library * * Matt Porter diff --git a/arch/ppc/syslib/ibm440sp_common.h b/arch/ppc/syslib/ibm440sp_common.h index a21a9906dcc..8077bf8ed11 100644 --- a/arch/ppc/syslib/ibm440sp_common.h +++ b/arch/ppc/syslib/ibm440sp_common.h @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/ibm440sp_common.h - * * PPC440SP system library * * Matt Porter diff --git a/arch/ppc/syslib/ibm44x_common.c b/arch/ppc/syslib/ibm44x_common.c index 71db11d2215..14a981a5cea 100644 --- a/arch/ppc/syslib/ibm44x_common.c +++ b/arch/ppc/syslib/ibm44x_common.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/ibm44x_common.c - * * PPC44x system library * * Matt Porter diff --git a/arch/ppc/syslib/ibm44x_common.h b/arch/ppc/syslib/ibm44x_common.h index b25a8995e4e..f179db8634e 100644 --- a/arch/ppc/syslib/ibm44x_common.h +++ b/arch/ppc/syslib/ibm44x_common.h @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/ibm44x_common.h - * * PPC44x system library * * Eugene Surovegin or diff --git a/arch/ppc/syslib/m8260_pci_erratum9.c b/arch/ppc/syslib/m8260_pci_erratum9.c index 1dc7e4e1d49..99e4bc0e42a 100644 --- a/arch/ppc/syslib/m8260_pci_erratum9.c +++ b/arch/ppc/syslib/m8260_pci_erratum9.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/mpc8260_pci9.c - * * Workaround for device erratum PCI 9. * See Motorola's "XPC826xA Family Device Errata Reference." * The erratum applies to all 8260 family Hip4 processors. It is scheduled diff --git a/arch/ppc/syslib/m8260_setup.c b/arch/ppc/syslib/m8260_setup.c index 76a2aa4ce65..b7a6cb2d8d5 100644 --- a/arch/ppc/syslib/m8260_setup.c +++ b/arch/ppc/syslib/m8260_setup.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/m8260_setup.c - * * Copyright (C) 1995 Linus Torvalds * Adapted from 'alpha' version by Gary Thomas * Modified by Cort Dougan (cort@cs.nmt.edu) diff --git a/arch/ppc/syslib/m8xx_setup.c b/arch/ppc/syslib/m8xx_setup.c index cdb73a23a53..dae9af78bde 100644 --- a/arch/ppc/syslib/m8xx_setup.c +++ b/arch/ppc/syslib/m8xx_setup.c @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/setup.c - * * Copyright (C) 1995 Linus Torvalds * Adapted from 'alpha' version by Gary Thomas * Modified by Cort Dougan (cort@cs.nmt.edu) diff --git a/arch/ppc/syslib/mpc10x_common.c b/arch/ppc/syslib/mpc10x_common.c index 3e039706bdb..2fc7c4150a1 100644 --- a/arch/ppc/syslib/mpc10x_common.c +++ b/arch/ppc/syslib/mpc10x_common.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/mpc10x_common.c - * * Common routines for the Motorola SPS MPC106, MPC107 and MPC8240 Host bridge, * Mem ctlr, EPIC, etc. * diff --git a/arch/ppc/syslib/mpc52xx_devices.c b/arch/ppc/syslib/mpc52xx_devices.c index da3c74bfdc9..7487539a4e9 100644 --- a/arch/ppc/syslib/mpc52xx_devices.c +++ b/arch/ppc/syslib/mpc52xx_devices.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/mpc52xx_devices.c - * * Freescale MPC52xx device descriptions * * diff --git a/arch/ppc/syslib/mpc52xx_pci.c b/arch/ppc/syslib/mpc52xx_pci.c index 313c96ec7eb..9ec525f9fe9 100644 --- a/arch/ppc/syslib/mpc52xx_pci.c +++ b/arch/ppc/syslib/mpc52xx_pci.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/mpc52xx_pci.c - * * PCI code for the Freescale MPC52xx embedded CPU. * * diff --git a/arch/ppc/syslib/mpc52xx_pci.h b/arch/ppc/syslib/mpc52xx_pci.h index 04b509a0253..77d47dbba85 100644 --- a/arch/ppc/syslib/mpc52xx_pci.h +++ b/arch/ppc/syslib/mpc52xx_pci.h @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/mpc52xx_pci.h - * * PCI Include file the Freescale MPC52xx embedded cpu chips * * diff --git a/arch/ppc/syslib/mpc52xx_pic.c b/arch/ppc/syslib/mpc52xx_pic.c index 4c4497e6251..c4406f9dc6a 100644 --- a/arch/ppc/syslib/mpc52xx_pic.c +++ b/arch/ppc/syslib/mpc52xx_pic.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/mpc52xx_pic.c - * * Programmable Interrupt Controller functions for the Freescale MPC52xx * embedded CPU. * diff --git a/arch/ppc/syslib/mpc52xx_setup.c b/arch/ppc/syslib/mpc52xx_setup.c index a4a4b02227d..2ee48ce0a51 100644 --- a/arch/ppc/syslib/mpc52xx_setup.c +++ b/arch/ppc/syslib/mpc52xx_setup.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/mpc52xx_setup.c - * * Common code for the boards based on Freescale MPC52xx embedded CPU. * * diff --git a/arch/ppc/syslib/mpc52xx_sys.c b/arch/ppc/syslib/mpc52xx_sys.c index 9a0f90aa8aa..b4e6f978f05 100644 --- a/arch/ppc/syslib/mpc52xx_sys.c +++ b/arch/ppc/syslib/mpc52xx_sys.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/mpc52xx_sys.c - * * Freescale MPC52xx system descriptions * * diff --git a/arch/ppc/syslib/mpc83xx_devices.c b/arch/ppc/syslib/mpc83xx_devices.c index f9b95de70e2..1af2c000fcf 100644 --- a/arch/ppc/syslib/mpc83xx_devices.c +++ b/arch/ppc/syslib/mpc83xx_devices.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/83xx/mpc83xx_devices.c - * * MPC83xx Device descriptions * * Maintainer: Kumar Gala diff --git a/arch/ppc/syslib/mpc83xx_sys.c b/arch/ppc/syslib/mpc83xx_sys.c index 82cf3ab77f4..0498ae7e01e 100644 --- a/arch/ppc/syslib/mpc83xx_sys.c +++ b/arch/ppc/syslib/mpc83xx_sys.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/83xx/mpc83xx_sys.c - * * MPC83xx System descriptions * * Maintainer: Kumar Gala diff --git a/arch/ppc/syslib/mpc85xx_devices.c b/arch/ppc/syslib/mpc85xx_devices.c index 00e9b6ff2f6..7735336f5b8 100644 --- a/arch/ppc/syslib/mpc85xx_devices.c +++ b/arch/ppc/syslib/mpc85xx_devices.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/85xx/mpc85xx_devices.c - * * MPC85xx Device descriptions * * Maintainer: Kumar Gala diff --git a/arch/ppc/syslib/mpc85xx_sys.c b/arch/ppc/syslib/mpc85xx_sys.c index 397cfbcce5e..d96a93dbcb5 100644 --- a/arch/ppc/syslib/mpc85xx_sys.c +++ b/arch/ppc/syslib/mpc85xx_sys.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/85xx/mpc85xx_sys.c - * * MPC85xx System descriptions * * Maintainer: Kumar Gala diff --git a/arch/ppc/syslib/mpc8xx_devices.c b/arch/ppc/syslib/mpc8xx_devices.c index 92dc98b36bd..bd41ed83beb 100644 --- a/arch/ppc/syslib/mpc8xx_devices.c +++ b/arch/ppc/syslib/mpc8xx_devices.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/mpc8xx_devices.c - * * MPC8xx Device descriptions * * Maintainer: Kumar Gala diff --git a/arch/ppc/syslib/mpc8xx_sys.c b/arch/ppc/syslib/mpc8xx_sys.c index d3c61752160..eee21328485 100644 --- a/arch/ppc/syslib/mpc8xx_sys.c +++ b/arch/ppc/syslib/mpc8xx_sys.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/mpc8xx_sys.c - * * MPC8xx System descriptions * * Maintainer: Kumar Gala diff --git a/arch/ppc/syslib/mv64360_pic.c b/arch/ppc/syslib/mv64360_pic.c index 58b0aa813e8..5a19697060f 100644 --- a/arch/ppc/syslib/mv64360_pic.c +++ b/arch/ppc/syslib/mv64360_pic.c @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/mv64360_pic.c - * * Interrupt controller support for Marvell's MV64360. * * Author: Rabeeh Khoury diff --git a/arch/ppc/syslib/mv64x60.c b/arch/ppc/syslib/mv64x60.c index 1f01b7e2376..3b039c30a43 100644 --- a/arch/ppc/syslib/mv64x60.c +++ b/arch/ppc/syslib/mv64x60.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/mv64x60.c - * * Common routines for the Marvell/Galileo Discovery line of host bridges * (gt64260, mv64360, mv64460, ...). * diff --git a/arch/ppc/syslib/mv64x60_dbg.c b/arch/ppc/syslib/mv64x60_dbg.c index fa5b2e45e0c..9cf18764a1a 100644 --- a/arch/ppc/syslib/mv64x60_dbg.c +++ b/arch/ppc/syslib/mv64x60_dbg.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/mv64x60_dbg.c - * * KGDB and progress routines for the Marvell/Galileo MV64x60 (Discovery). * * Author: Mark A. Greer diff --git a/arch/ppc/syslib/mv64x60_win.c b/arch/ppc/syslib/mv64x60_win.c index 5b827e2bbe2..4bf1ad17bf1 100644 --- a/arch/ppc/syslib/mv64x60_win.c +++ b/arch/ppc/syslib/mv64x60_win.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/mv64x60_win.c - * * Tables with info on how to manipulate the 32 & 64 bit windows on the * various types of Marvell bridge chips. * diff --git a/arch/ppc/syslib/open_pic.c b/arch/ppc/syslib/open_pic.c index 894779712b4..38e5b93fbe4 100644 --- a/arch/ppc/syslib/open_pic.c +++ b/arch/ppc/syslib/open_pic.c @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/open_pic.c -- OpenPIC Interrupt Handling - * * Copyright (C) 1997 Geert Uytterhoeven * * This file is subject to the terms and conditions of the GNU General Public diff --git a/arch/ppc/syslib/open_pic2.c b/arch/ppc/syslib/open_pic2.c index 1c40049b9a4..bcbe40de26f 100644 --- a/arch/ppc/syslib/open_pic2.c +++ b/arch/ppc/syslib/open_pic2.c @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/open_pic.c -- OpenPIC Interrupt Handling - * * Copyright (C) 1997 Geert Uytterhoeven * * This file is subject to the terms and conditions of the GNU General Public diff --git a/arch/ppc/syslib/open_pic_defs.h b/arch/ppc/syslib/open_pic_defs.h index 6c94e713146..3a25de7cb57 100644 --- a/arch/ppc/syslib/open_pic_defs.h +++ b/arch/ppc/syslib/open_pic_defs.h @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/open_pic_defs.h -- OpenPIC definitions - * * Copyright (C) 1997 Geert Uytterhoeven * * This file is based on the following documentation: diff --git a/arch/ppc/syslib/pci_auto.c b/arch/ppc/syslib/pci_auto.c index d64207c2a97..ee20a86fcc4 100644 --- a/arch/ppc/syslib/pci_auto.c +++ b/arch/ppc/syslib/pci_auto.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/pci_auto.c - * * PCI autoconfiguration library * * Author: Matt Porter diff --git a/arch/ppc/syslib/ppc4xx_dma.c b/arch/ppc/syslib/ppc4xx_dma.c index 05ccd598dd4..b40b96a8c60 100644 --- a/arch/ppc/syslib/ppc4xx_dma.c +++ b/arch/ppc/syslib/ppc4xx_dma.c @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/ppc4xx_dma.c - * * IBM PPC4xx DMA engine core library * * Copyright 2000-2004 MontaVista Software Inc. diff --git a/arch/ppc/syslib/ppc4xx_pic.c b/arch/ppc/syslib/ppc4xx_pic.c index aa4165144ec..fd9af0fc0e9 100644 --- a/arch/ppc/syslib/ppc4xx_pic.c +++ b/arch/ppc/syslib/ppc4xx_pic.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/ppc4xx_pic.c - * * Interrupt controller driver for PowerPC 4xx-based processors. * * Eugene Surovegin or diff --git a/arch/ppc/syslib/ppc4xx_sgdma.c b/arch/ppc/syslib/ppc4xx_sgdma.c index 9f76e8ee39e..280ea010a9c 100644 --- a/arch/ppc/syslib/ppc4xx_sgdma.c +++ b/arch/ppc/syslib/ppc4xx_sgdma.c @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/ppc4xx_sgdma.c - * * IBM PPC4xx DMA engine scatter/gather library * * Copyright 2002-2003 MontaVista Software Inc. diff --git a/arch/ppc/syslib/ppc83xx_setup.c b/arch/ppc/syslib/ppc83xx_setup.c index 7bada82527a..26afd637dc8 100644 --- a/arch/ppc/syslib/ppc83xx_setup.c +++ b/arch/ppc/syslib/ppc83xx_setup.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/ppc83xx_setup.c - * * MPC83XX common board code * * Maintainer: Kumar Gala diff --git a/arch/ppc/syslib/ppc83xx_setup.h b/arch/ppc/syslib/ppc83xx_setup.h index a122a7322e5..478b011cd96 100644 --- a/arch/ppc/syslib/ppc83xx_setup.h +++ b/arch/ppc/syslib/ppc83xx_setup.h @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/ppc83xx_setup.h - * * MPC83XX common board definitions * * Maintainer: Kumar Gala diff --git a/arch/ppc/syslib/ppc85xx_common.c b/arch/ppc/syslib/ppc85xx_common.c index 19ad537225e..0145c968f9a 100644 --- a/arch/ppc/syslib/ppc85xx_common.c +++ b/arch/ppc/syslib/ppc85xx_common.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/ppc85xx_common.c - * * MPC85xx support routines * * Maintainer: Kumar Gala diff --git a/arch/ppc/syslib/ppc85xx_common.h b/arch/ppc/syslib/ppc85xx_common.h index 94edf32151d..182744a1321 100644 --- a/arch/ppc/syslib/ppc85xx_common.h +++ b/arch/ppc/syslib/ppc85xx_common.h @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/ppc85xx_common.h - * * MPC85xx support routines * * Maintainer: Kumar Gala diff --git a/arch/ppc/syslib/ppc85xx_setup.c b/arch/ppc/syslib/ppc85xx_setup.c index e4dda43fdaa..e70b34ee627 100644 --- a/arch/ppc/syslib/ppc85xx_setup.c +++ b/arch/ppc/syslib/ppc85xx_setup.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/ppc85xx_setup.c - * * MPC85XX common board code * * Maintainer: Kumar Gala diff --git a/arch/ppc/syslib/ppc85xx_setup.h b/arch/ppc/syslib/ppc85xx_setup.h index e340b0545fb..f55b8032d3d 100644 --- a/arch/ppc/syslib/ppc85xx_setup.h +++ b/arch/ppc/syslib/ppc85xx_setup.h @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/ppc85xx_setup.h - * * MPC85XX common board definitions * * Maintainer: Kumar Gala diff --git a/arch/ppc/syslib/ppc_sys.c b/arch/ppc/syslib/ppc_sys.c index 879783a41cf..60c724e1158 100644 --- a/arch/ppc/syslib/ppc_sys.c +++ b/arch/ppc/syslib/ppc_sys.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/ppc_sys.c - * * PPC System library functions * * Maintainer: Kumar Gala diff --git a/arch/ppc/syslib/pq2_devices.c b/arch/ppc/syslib/pq2_devices.c index 6ff3aab82fc..0636aed7b82 100644 --- a/arch/ppc/syslib/pq2_devices.c +++ b/arch/ppc/syslib/pq2_devices.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/pq2_devices.c - * * PQ2 Device descriptions * * Maintainer: Kumar Gala diff --git a/arch/ppc/syslib/pq2_sys.c b/arch/ppc/syslib/pq2_sys.c index 36d6e217994..75e64f1c144 100644 --- a/arch/ppc/syslib/pq2_sys.c +++ b/arch/ppc/syslib/pq2_sys.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/pq2_devices.c - * * PQ2 System descriptions * * Maintainer: Kumar Gala diff --git a/arch/ppc/syslib/prep_nvram.c b/arch/ppc/syslib/prep_nvram.c index 2c6364d9641..474dccbc4a8 100644 --- a/arch/ppc/syslib/prep_nvram.c +++ b/arch/ppc/syslib/prep_nvram.c @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/prep_nvram.c - * * Copyright (C) 1998 Corey Minyard * * This reads the NvRAM on PReP compliant machines (generally from IBM or diff --git a/arch/ppc/syslib/todc_time.c b/arch/ppc/syslib/todc_time.c index 1323c641c19..a8168b8e568 100644 --- a/arch/ppc/syslib/todc_time.c +++ b/arch/ppc/syslib/todc_time.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/todc_time.c - * * Time of Day Clock support for the M48T35, M48T37, M48T59, and MC146818 * Real Time Clocks/Timekeepers. * diff --git a/arch/ppc/syslib/xilinx_pic.c b/arch/ppc/syslib/xilinx_pic.c index 848fb512f3f..e672b600f31 100644 --- a/arch/ppc/syslib/xilinx_pic.c +++ b/arch/ppc/syslib/xilinx_pic.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/xilinx_pic.c - * * Interrupt controller driver for Xilinx Virtex-II Pro. * * Author: MontaVista Software, Inc. -- cgit v1.2.3-18-g5258 From 774fee58c465ea1c7e9775e347ec307bcf2deeb3 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Thu, 2 Feb 2006 15:41:48 -0800 Subject: [PATCH] powerpc: Add missing vmlinux.bin target With this patch 'make vmlinux.bin' works. This is needed by some embedded platforms. Kumar already added the routines to actually build the image in arch/powerpc/boot/Makefile. Signed-off-by: Geoff Levand Signed-off-by: Paul Mackerras --- arch/powerpc/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 15fc3e98ac5..81d3b3ddc20 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -148,7 +148,7 @@ all: $(KBUILD_IMAGE) CPPFLAGS_vmlinux.lds := -Upowerpc -BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm uImage +BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm uImage vmlinux.bin .PHONY: $(BOOT_TARGETS) -- cgit v1.2.3-18-g5258 From 8b0d5514a96daab7825f481d8cd5e88a0376d659 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 16 Feb 2006 14:32:08 -0600 Subject: powerpc: Fix mpc83xx restart bug We need to write the correct value to the RCR to get a HW reset. Signed-off-by: Kumar Gala --- arch/powerpc/platforms/83xx/misc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/83xx/misc.c b/arch/powerpc/platforms/83xx/misc.c index 0eb3d99f1b9..1455bcef489 100644 --- a/arch/powerpc/platforms/83xx/misc.c +++ b/arch/powerpc/platforms/83xx/misc.c @@ -35,7 +35,7 @@ void mpc83xx_restart(char *cmd) out_be32(reg + (RST_PROT_REG >> 2), 0x52535445); /* set software hard reset */ - out_be32(reg + (RST_CTRL_REG >> 2), 0x52535445); + out_be32(reg + (RST_CTRL_REG >> 2), 0x2); for (;;) ; } -- cgit v1.2.3-18-g5258 From 379b5441aeb895fe55b877a8a9c187e8728f774c Mon Sep 17 00:00:00 2001 From: Zach Brown Date: Fri, 27 Jan 2006 14:02:47 -0800 Subject: x86: align per-cpu section to configured cache bytes This matches the fix for a bug seen on x86-64. Test booted on old hardware that had 32 byte cachelines to begin with. Signed-off-by: Zach Brown Signed-off-by: Sam Ravnborg --- arch/i386/kernel/vmlinux.lds.S | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/i386/kernel/vmlinux.lds.S b/arch/i386/kernel/vmlinux.lds.S index 4710195b6b7..18f99cce589 100644 --- a/arch/i386/kernel/vmlinux.lds.S +++ b/arch/i386/kernel/vmlinux.lds.S @@ -7,6 +7,7 @@ #include #include #include +#include OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386") OUTPUT_ARCH(i386) @@ -115,7 +116,7 @@ SECTIONS __initramfs_start = .; .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) { *(.init.ramfs) } __initramfs_end = .; - . = ALIGN(32); + . = ALIGN(L1_CACHE_BYTES); __per_cpu_start = .; .data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) { *(.data.percpu) } __per_cpu_end = .; -- cgit v1.2.3-18-g5258 From ebcff3c773b42bce6182ec16485abca4e53fba97 Mon Sep 17 00:00:00 2001 From: Horst Kronstorfer Date: Tue, 21 Feb 2006 23:34:07 -0600 Subject: ppc32: Fix BCSR_SIZE for MPC834x SYS According to the 'MPC8349E MDS Processor Board User Manual Rev. 1.6' the size of the BCSR mapping is 32kb. Signed-off-by: Horst Kronstorfer Signed-off-by: Kumar Gala --- arch/ppc/platforms/83xx/mpc834x_sys.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.h b/arch/ppc/platforms/83xx/mpc834x_sys.h index aa86c22cdd2..6727bbdc36e 100644 --- a/arch/ppc/platforms/83xx/mpc834x_sys.h +++ b/arch/ppc/platforms/83xx/mpc834x_sys.h @@ -23,7 +23,7 @@ #define VIRT_IMMRBAR ((uint)0xfe000000) #define BCSR_PHYS_ADDR ((uint)0xf8000000) -#define BCSR_SIZE ((uint)(128 * 1024)) +#define BCSR_SIZE ((uint)(32 * 1024)) #define BCSR_MISC_REG2_OFF 0x07 #define BCSR_MISC_REG2_PORESET 0x01 -- cgit v1.2.3-18-g5258 From 8080d5497146d5d27d9e8e78229d1adc7fe280cf Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Fri, 10 Feb 2006 17:01:06 -0600 Subject: powerpc: Add PCI support for 8540 ADS to powerpc tree Add PCI support for setting PCI from flat device tree on 85xx specifically for MPC8540 ADS. Signed-off-by: Andy Fleming Signed-off-by: Kumar Gala --- arch/powerpc/platforms/85xx/Makefile | 3 +- arch/powerpc/platforms/85xx/mpc8540_ads.h | 24 -------- arch/powerpc/platforms/85xx/mpc85xx.h | 1 + arch/powerpc/platforms/85xx/mpc85xx_ads.c | 67 +++++++++++++++++++++ arch/powerpc/platforms/85xx/pci.c | 96 +++++++++++++++++++++++++++++++ 5 files changed, 166 insertions(+), 25 deletions(-) create mode 100644 arch/powerpc/platforms/85xx/pci.c (limited to 'arch') diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index 70e1190809f..ffc4139cb21 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -1,4 +1,5 @@ # # Makefile for the PowerPC 85xx linux kernel. # -obj-$(CONFIG_PPC_85xx) += misc.o mpc85xx_ads.o +obj-$(CONFIG_PPC_85xx) += misc.o pci.o +obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o diff --git a/arch/powerpc/platforms/85xx/mpc8540_ads.h b/arch/powerpc/platforms/85xx/mpc8540_ads.h index b3ec88caad1..f770cadb208 100644 --- a/arch/powerpc/platforms/85xx/mpc8540_ads.h +++ b/arch/powerpc/platforms/85xx/mpc8540_ads.h @@ -30,30 +30,6 @@ #define PIRQC MPC85xx_IRQ_EXT3 #define PIRQD MPC85xx_IRQ_EXT4 -#define MPC85XX_PCI1_LOWER_IO 0x00000000 -#define MPC85XX_PCI1_UPPER_IO 0x00ffffff - -#define MPC85XX_PCI1_LOWER_MEM 0x80000000 -#define MPC85XX_PCI1_UPPER_MEM 0x9fffffff - -#define MPC85XX_PCI1_IO_BASE 0xe2000000 -#define MPC85XX_PCI1_MEM_OFFSET 0x00000000 - -#define MPC85XX_PCI1_IO_SIZE 0x01000000 - -/* PCI config */ -#define PCI1_CFG_ADDR_OFFSET (0x8000) -#define PCI1_CFG_DATA_OFFSET (0x8004) - -#define PCI2_CFG_ADDR_OFFSET (0x9000) -#define PCI2_CFG_DATA_OFFSET (0x9004) - -/* Additional register for PCI-X configuration */ -#define PCIX_NEXT_CAP 0x60 -#define PCIX_CAP_ID 0x61 -#define PCIX_COMMAND 0x62 -#define PCIX_STATUS 0x64 - /* Offset of CPM register space */ #define CPM_MAP_ADDR (CCSRBAR + MPC85xx_CPM_OFFSET) diff --git a/arch/powerpc/platforms/85xx/mpc85xx.h b/arch/powerpc/platforms/85xx/mpc85xx.h index be75abb2a28..b44db6268f3 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx.h +++ b/arch/powerpc/platforms/85xx/mpc85xx.h @@ -15,3 +15,4 @@ */ extern void mpc85xx_restart(char *); +extern int add_bridge(struct device_node *dev); diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c index ba6798d4765..b7821dbae00 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -67,6 +67,62 @@ static u_char mpc85xx_ads_openpic_initsenses[] __initdata = { 0x0, /* External 11: */ }; +#ifdef CONFIG_PCI +/* + * interrupt routing + */ + +int +mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + static char pci_irq_table[][4] = + /* + * This is little evil, but works around the fact + * that revA boards have IDSEL starting at 18 + * and others boards (older) start at 12 + * + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 2 */ + {PIRQD, PIRQA, PIRQB, PIRQC}, + {PIRQC, PIRQD, PIRQA, PIRQB}, + {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 5 */ + {0, 0, 0, 0}, /* -- */ + {0, 0, 0, 0}, /* -- */ + {0, 0, 0, 0}, /* -- */ + {0, 0, 0, 0}, /* -- */ + {0, 0, 0, 0}, /* -- */ + {0, 0, 0, 0}, /* -- */ + {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 12 */ + {PIRQD, PIRQA, PIRQB, PIRQC}, + {PIRQC, PIRQD, PIRQA, PIRQB}, + {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 15 */ + {0, 0, 0, 0}, /* -- */ + {0, 0, 0, 0}, /* -- */ + {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 18 */ + {PIRQD, PIRQA, PIRQB, PIRQC}, + {PIRQC, PIRQD, PIRQA, PIRQB}, + {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 21 */ + }; + + const long min_idsel = 2, max_idsel = 21, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; +} + +int +mpc85xx_exclude_device(u_char bus, u_char devfn) +{ + if (bus == 0 && PCI_SLOT(devfn) == 0) + return PCIBIOS_DEVICE_NOT_FOUND; + else + return PCIBIOS_SUCCESSFUL; +} + +#endif /* CONFIG_PCI */ + + void __init mpc85xx_ads_pic_init(void) { struct mpic *mpic1; @@ -110,6 +166,7 @@ void __init mpc85xx_ads_pic_init(void) static void __init mpc85xx_ads_setup_arch(void) { struct device_node *cpu; + struct device_node *np; if (ppc_md.progress) ppc_md.progress("mpc85xx_ads_setup_arch()", 0); @@ -125,6 +182,16 @@ static void __init mpc85xx_ads_setup_arch(void) loops_per_jiffy = 50000000 / HZ; of_node_put(cpu); } + +#ifdef CONFIG_PCI + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) + add_bridge(np); + + ppc_md.pci_swizzle = common_swizzle; + ppc_md.pci_map_irq = mpc85xx_map_irq; + ppc_md.pci_exclude_device = mpc85xx_exclude_device; +#endif + #ifdef CONFIG_ROOT_NFS ROOT_DEV = Root_NFS; #else diff --git a/arch/powerpc/platforms/85xx/pci.c b/arch/powerpc/platforms/85xx/pci.c new file mode 100644 index 00000000000..bad290110ed --- /dev/null +++ b/arch/powerpc/platforms/85xx/pci.c @@ -0,0 +1,96 @@ +/* + * FSL SoC setup code + * + * Maintained by Kumar Gala (see MAINTAINERS for contact information) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#undef DEBUG + +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +int mpc85xx_pci2_busno = 0; + +#ifdef CONFIG_PCI +int __init add_bridge(struct device_node *dev) +{ + int len; + struct pci_controller *hose; + struct resource rsrc; + int *bus_range; + int primary = 1, has_address = 0; + phys_addr_t immr = get_immrbase(); + + DBG("Adding PCI host bridge %s\n", dev->full_name); + + /* Fetch host bridge registers address */ + has_address = (of_address_to_resource(dev, 0, &rsrc) == 0); + + /* Get bus range if any */ + bus_range = (int *) get_property(dev, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING "Can't get bus-range for %s, assume" + " bus 0\n", dev->full_name); + } + + hose = pcibios_alloc_controller(); + if (!hose) + return -ENOMEM; + hose->arch_data = dev; + hose->set_cfg_type = 1; + + hose->first_busno = bus_range ? bus_range[0] : 0; + hose->last_busno = bus_range ? bus_range[1] : 0xff; + + /* PCI 1 */ + if ((rsrc.start & 0xfffff) == 0x8000) { + setup_indirect_pci(hose, immr + 0x8000, immr + 0x8004); + } + /* PCI 2 */ + if ((rsrc.start & 0xfffff) == 0x9000) { + setup_indirect_pci(hose, immr + 0x9000, immr + 0x9004); + primary = 0; + hose->bus_offset = hose->first_busno; + mpc85xx_pci2_busno = hose->first_busno; + } + + printk(KERN_INFO "Found MPC85xx PCI host bridge at 0x%08lx. " + "Firmware bus number: %d->%d\n", + rsrc.start, hose->first_busno, hose->last_busno); + + DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", + hose, hose->cfg_addr, hose->cfg_data); + + /* Interpret the "ranges" property */ + /* This also maps the I/O region and sets isa_io/mem_base */ + pci_process_bridge_OF_ranges(hose, dev, primary); + + return 0; +} + +#endif -- cgit v1.2.3-18-g5258 From c6622f63db86fcbd41bf6fe05ddf2e00c1e51ced Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 24 Feb 2006 10:06:59 +1100 Subject: powerpc: Implement accurate task and CPU time accounting This implements accurate task and cpu time accounting for 64-bit powerpc kernels. Instead of accounting a whole jiffy of time to a task on a timer interrupt because that task happened to be running at the time, we now account time in units of timebase ticks according to the actual time spent by the task in user mode and kernel mode. We also count the time spent processing hardware and software interrupts accurately. This is conditional on CONFIG_VIRT_CPU_ACCOUNTING. If that is not set, we do tick-based approximate accounting as before. To get this accurate information, we read either the PURR (processor utilization of resources register) on POWER5 machines, or the timebase on other machines on * each entry to the kernel from usermode * each exit to usermode * transitions between process context, hard irq context and soft irq context in kernel mode * context switches. On POWER5 systems with shared-processor logical partitioning we also read both the PURR and the timebase at each timer interrupt and context switch in order to determine how much time has been taken by the hypervisor to run other partitions ("steal" time). Unfortunately, since we need values of the PURR on both threads at the same time to accurately calculate the steal time, and since we can only calculate steal time on a per-core basis, the apportioning of the steal time between idle time (time which we ceded to the hypervisor in the idle loop) and actual stolen time is somewhat approximate at the moment. This is all based quite heavily on what s390 does, and it uses the generic interfaces that were added by the s390 developers, i.e. account_system_time(), account_user_time(), etc. This patch doesn't add any new interfaces between the kernel and userspace, and doesn't change the units in which time is reported to userspace by things such as /proc/stat, /proc//stat, getrusage(), times(), etc. Internally the various task and cpu times are stored in timebase units, but they are converted to USER_HZ units (1/100th of a second) when reported to userspace. Some precision is therefore lost but there should not be any accumulating error, since the internal accumulation is at full precision. Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 15 +++ arch/powerpc/kernel/asm-offsets.c | 3 + arch/powerpc/kernel/entry_64.S | 7 +- arch/powerpc/kernel/head_64.S | 9 ++ arch/powerpc/kernel/irq.c | 30 +++-- arch/powerpc/kernel/process.c | 7 +- arch/powerpc/kernel/smp.c | 4 +- arch/powerpc/kernel/time.c | 236 +++++++++++++++++++++++++++++++++++++- 8 files changed, 297 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index fb0dcb994b8..d112aed2999 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -250,6 +250,21 @@ config PPC_STD_MMU_32 def_bool y depends on PPC_STD_MMU && PPC32 +config VIRT_CPU_ACCOUNTING + bool "Deterministic task and CPU time accounting" + depends on PPC64 + default y + help + Select this option to enable more accurate task and CPU time + accounting. This is done by reading a CPU counter on each + kernel entry and exit and on transitions within the kernel + between system, softirq and hardirq state, so there is a + small performance impact. This also enables accounting of + stolen time on logically-partitioned systems running on + IBM POWER5-based machines. + + If in doubt, say Y here. + config SMP depends on PPC_STD_MMU bool "Symmetric multi-processing support" diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 840aad43a98..18810ac55bc 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -137,6 +137,9 @@ int main(void) DEFINE(PACAEMERGSP, offsetof(struct paca_struct, emergency_sp)); DEFINE(PACALPPACAPTR, offsetof(struct paca_struct, lppaca_ptr)); DEFINE(PACAHWCPUID, offsetof(struct paca_struct, hw_cpu_id)); + DEFINE(PACA_STARTPURR, offsetof(struct paca_struct, startpurr)); + DEFINE(PACA_USER_TIME, offsetof(struct paca_struct, user_time)); + DEFINE(PACA_SYSTEM_TIME, offsetof(struct paca_struct, system_time)); DEFINE(LPPACASRR0, offsetof(struct lppaca, saved_srr0)); DEFINE(LPPACASRR1, offsetof(struct lppaca, saved_srr1)); diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 79a0c910f0d..8f606c1889f 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -61,6 +61,7 @@ system_call_common: std r12,_MSR(r1) std r0,GPR0(r1) std r10,GPR1(r1) + ACCOUNT_CPU_USER_ENTRY(r10, r11) std r2,GPR2(r1) std r3,GPR3(r1) std r4,GPR4(r1) @@ -168,8 +169,9 @@ syscall_error_cont: stdcx. r0,0,r1 /* to clear the reservation */ andi. r6,r8,MSR_PR ld r4,_LINK(r1) - beq- 1f /* only restore r13 if */ - ld r13,GPR13(r1) /* returning to usermode */ + beq- 1f + ACCOUNT_CPU_USER_EXIT(r11, r12) + ld r13,GPR13(r1) /* only restore r13 if returning to usermode */ 1: ld r2,GPR2(r1) li r12,MSR_RI andc r11,r10,r12 @@ -536,6 +538,7 @@ restore: * userspace */ beq 1f + ACCOUNT_CPU_USER_EXIT(r3, r4) REST_GPR(13, r1) 1: ld r3,_CTR(r1) diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 2b21ec49928..be3ae773357 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -277,6 +277,7 @@ exception_marker: std r10,0(r1); /* make stack chain pointer */ \ std r0,GPR0(r1); /* save r0 in stackframe */ \ std r10,GPR1(r1); /* save r1 in stackframe */ \ + ACCOUNT_CPU_USER_ENTRY(r9, r10); \ std r2,GPR2(r1); /* save r2 in stackframe */ \ SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \ SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \ @@ -844,6 +845,14 @@ fast_exception_return: ld r11,_NIP(r1) andi. r3,r12,MSR_RI /* check if RI is set */ beq- unrecov_fer + +#ifdef CONFIG_VIRT_CPU_ACCOUNTING + andi. r3,r12,MSR_PR + beq 2f + ACCOUNT_CPU_USER_EXIT(r3, r4) +2: +#endif + ld r3,_CCR(r1) ld r4,_LINK(r1) ld r5,_CTR(r1) diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index edb2b00edbd..24dc8117b82 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -369,6 +369,7 @@ unsigned int real_irq_to_virt_slowpath(unsigned int real_irq) return NO_IRQ; } +#endif /* CONFIG_PPC64 */ #ifdef CONFIG_IRQSTACKS struct thread_info *softirq_ctx[NR_CPUS]; @@ -392,10 +393,24 @@ void irq_ctx_init(void) } } +static inline void do_softirq_onstack(void) +{ + struct thread_info *curtp, *irqtp; + + curtp = current_thread_info(); + irqtp = softirq_ctx[smp_processor_id()]; + irqtp->task = curtp->task; + call_do_softirq(irqtp); + irqtp->task = NULL; +} + +#else +#define do_softirq_onstack() __do_softirq() +#endif /* CONFIG_IRQSTACKS */ + void do_softirq(void) { unsigned long flags; - struct thread_info *curtp, *irqtp; if (in_interrupt()) return; @@ -403,19 +418,18 @@ void do_softirq(void) local_irq_save(flags); if (local_softirq_pending()) { - curtp = current_thread_info(); - irqtp = softirq_ctx[smp_processor_id()]; - irqtp->task = curtp->task; - call_do_softirq(irqtp); - irqtp->task = NULL; + account_system_vtime(current); + local_bh_disable(); + do_softirq_onstack(); + account_system_vtime(current); + __local_bh_enable(); } local_irq_restore(flags); } EXPORT_SYMBOL(do_softirq); -#endif /* CONFIG_IRQSTACKS */ - +#ifdef CONFIG_PPC64 static int __init setup_noirqdistrib(char *str) { distribute_irqs = 0; diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index dd774c3c930..1770a066c21 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -45,9 +45,9 @@ #include #include #include +#include #ifdef CONFIG_PPC64 #include -#include #endif extern unsigned long _get_SP(void); @@ -328,6 +328,11 @@ struct task_struct *__switch_to(struct task_struct *prev, #endif local_irq_save(flags); + + account_system_vtime(current); + account_process_vtime(current); + calculate_steal_time(); + last = _switch(old_thread, new_thread); local_irq_restore(flags); diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 13595a64f01..805eaedbc30 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -541,7 +541,7 @@ int __devinit start_secondary(void *unused) smp_ops->take_timebase(); if (system_state > SYSTEM_BOOTING) - per_cpu(last_jiffy, cpu) = get_tb(); + snapshot_timebase(); spin_lock(&call_lock); cpu_set(cpu, cpu_online_map); @@ -573,6 +573,8 @@ void __init smp_cpus_done(unsigned int max_cpus) set_cpus_allowed(current, old_mask); + snapshot_timebases(); + dump_numa_cpu_topology(); } diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 2a7ddc57937..0b34db28916 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -51,6 +51,7 @@ #include #include #include +#include #include #include @@ -135,6 +136,220 @@ unsigned long tb_last_stamp; */ DEFINE_PER_CPU(unsigned long, last_jiffy); +#ifdef CONFIG_VIRT_CPU_ACCOUNTING +/* + * Factors for converting from cputime_t (timebase ticks) to + * jiffies, milliseconds, seconds, and clock_t (1/USER_HZ seconds). + * These are all stored as 0.64 fixed-point binary fractions. + */ +u64 __cputime_jiffies_factor; +u64 __cputime_msec_factor; +u64 __cputime_sec_factor; +u64 __cputime_clockt_factor; + +static void calc_cputime_factors(void) +{ + struct div_result res; + + div128_by_32(HZ, 0, tb_ticks_per_sec, &res); + __cputime_jiffies_factor = res.result_low; + div128_by_32(1000, 0, tb_ticks_per_sec, &res); + __cputime_msec_factor = res.result_low; + div128_by_32(1, 0, tb_ticks_per_sec, &res); + __cputime_sec_factor = res.result_low; + div128_by_32(USER_HZ, 0, tb_ticks_per_sec, &res); + __cputime_clockt_factor = res.result_low; +} + +/* + * Read the PURR on systems that have it, otherwise the timebase. + */ +static u64 read_purr(void) +{ + if (cpu_has_feature(CPU_FTR_PURR)) + return mfspr(SPRN_PURR); + return mftb(); +} + +/* + * Account time for a transition between system, hard irq + * or soft irq state. + */ +void account_system_vtime(struct task_struct *tsk) +{ + u64 now, delta; + unsigned long flags; + + local_irq_save(flags); + now = read_purr(); + delta = now - get_paca()->startpurr; + get_paca()->startpurr = now; + if (!in_interrupt()) { + delta += get_paca()->system_time; + get_paca()->system_time = 0; + } + account_system_time(tsk, 0, delta); + local_irq_restore(flags); +} + +/* + * Transfer the user and system times accumulated in the paca + * by the exception entry and exit code to the generic process + * user and system time records. + * Must be called with interrupts disabled. + */ +void account_process_vtime(struct task_struct *tsk) +{ + cputime_t utime; + + utime = get_paca()->user_time; + get_paca()->user_time = 0; + account_user_time(tsk, utime); +} + +static void account_process_time(struct pt_regs *regs) +{ + int cpu = smp_processor_id(); + + account_process_vtime(current); + run_local_timers(); + if (rcu_pending(cpu)) + rcu_check_callbacks(cpu, user_mode(regs)); + scheduler_tick(); + run_posix_cpu_timers(current); +} + +#ifdef CONFIG_PPC_SPLPAR +/* + * Stuff for accounting stolen time. + */ +struct cpu_purr_data { + int initialized; /* thread is running */ + u64 tb0; /* timebase at origin time */ + u64 purr0; /* PURR at origin time */ + u64 tb; /* last TB value read */ + u64 purr; /* last PURR value read */ + u64 stolen; /* stolen time so far */ + spinlock_t lock; +}; + +static DEFINE_PER_CPU(struct cpu_purr_data, cpu_purr_data); + +static void snapshot_tb_and_purr(void *data) +{ + struct cpu_purr_data *p = &__get_cpu_var(cpu_purr_data); + + p->tb0 = mftb(); + p->purr0 = mfspr(SPRN_PURR); + p->tb = p->tb0; + p->purr = 0; + wmb(); + p->initialized = 1; +} + +/* + * Called during boot when all cpus have come up. + */ +void snapshot_timebases(void) +{ + int cpu; + + if (!cpu_has_feature(CPU_FTR_PURR)) + return; + for_each_cpu(cpu) + spin_lock_init(&per_cpu(cpu_purr_data, cpu).lock); + on_each_cpu(snapshot_tb_and_purr, NULL, 0, 1); +} + +void calculate_steal_time(void) +{ + u64 tb, purr, t0; + s64 stolen; + struct cpu_purr_data *p0, *pme, *phim; + int cpu; + + if (!cpu_has_feature(CPU_FTR_PURR)) + return; + cpu = smp_processor_id(); + pme = &per_cpu(cpu_purr_data, cpu); + if (!pme->initialized) + return; /* this can happen in early boot */ + p0 = &per_cpu(cpu_purr_data, cpu & ~1); + phim = &per_cpu(cpu_purr_data, cpu ^ 1); + spin_lock(&p0->lock); + tb = mftb(); + purr = mfspr(SPRN_PURR) - pme->purr0; + if (!phim->initialized || !cpu_online(cpu ^ 1)) { + stolen = (tb - pme->tb) - (purr - pme->purr); + } else { + t0 = pme->tb0; + if (phim->tb0 < t0) + t0 = phim->tb0; + stolen = phim->tb - t0 - phim->purr - purr - p0->stolen; + } + if (stolen > 0) { + account_steal_time(current, stolen); + p0->stolen += stolen; + } + pme->tb = tb; + pme->purr = purr; + spin_unlock(&p0->lock); +} + +/* + * Must be called before the cpu is added to the online map when + * a cpu is being brought up at runtime. + */ +static void snapshot_purr(void) +{ + int cpu; + u64 purr; + struct cpu_purr_data *p0, *pme, *phim; + unsigned long flags; + + if (!cpu_has_feature(CPU_FTR_PURR)) + return; + cpu = smp_processor_id(); + pme = &per_cpu(cpu_purr_data, cpu); + p0 = &per_cpu(cpu_purr_data, cpu & ~1); + phim = &per_cpu(cpu_purr_data, cpu ^ 1); + spin_lock_irqsave(&p0->lock, flags); + pme->tb = pme->tb0 = mftb(); + purr = mfspr(SPRN_PURR); + if (!phim->initialized) { + pme->purr = 0; + pme->purr0 = purr; + } else { + /* set p->purr and p->purr0 for no change in p0->stolen */ + pme->purr = phim->tb - phim->tb0 - phim->purr - p0->stolen; + pme->purr0 = purr - pme->purr; + } + pme->initialized = 1; + spin_unlock_irqrestore(&p0->lock, flags); +} + +#endif /* CONFIG_PPC_SPLPAR */ + +#else /* ! CONFIG_VIRT_CPU_ACCOUNTING */ +#define calc_cputime_factors() +#define account_process_time(regs) update_process_times(user_mode(regs)) +#define calculate_steal_time() do { } while (0) +#endif + +#if !(defined(CONFIG_VIRT_CPU_ACCOUNTING) && defined(CONFIG_PPC_SPLPAR)) +#define snapshot_purr() do { } while (0) +#endif + +/* + * Called when a cpu comes up after the system has finished booting, + * i.e. as a result of a hotplug cpu action. + */ +void snapshot_timebase(void) +{ + __get_cpu_var(last_jiffy) = get_tb(); + snapshot_purr(); +} + void __delay(unsigned long loops) { unsigned long start; @@ -382,6 +597,7 @@ static void iSeries_tb_recal(void) new_tb_ticks_per_jiffy, sign, tick_diff ); tb_ticks_per_jiffy = new_tb_ticks_per_jiffy; tb_ticks_per_sec = new_tb_ticks_per_sec; + calc_cputime_factors(); div128_by_32( XSEC_PER_SEC, 0, tb_ticks_per_sec, &divres ); do_gtod.tb_ticks_per_sec = tb_ticks_per_sec; tb_to_xs = divres.result_low; @@ -430,6 +646,7 @@ void timer_interrupt(struct pt_regs * regs) irq_enter(); profile_tick(CPU_PROFILING, regs); + calculate_steal_time(); #ifdef CONFIG_PPC_ISERIES get_lppaca()->int_dword.fields.decr_int = 0; @@ -451,7 +668,7 @@ void timer_interrupt(struct pt_regs * regs) * is the case. */ if (!cpu_is_offline(cpu)) - update_process_times(user_mode(regs)); + account_process_time(regs); /* * No need to check whether cpu is offline here; boot_cpuid @@ -508,13 +725,27 @@ void wakeup_decrementer(void) void __init smp_space_timers(unsigned int max_cpus) { int i; + unsigned long half = tb_ticks_per_jiffy / 2; unsigned long offset = tb_ticks_per_jiffy / max_cpus; unsigned long previous_tb = per_cpu(last_jiffy, boot_cpuid); /* make sure tb > per_cpu(last_jiffy, cpu) for all cpus always */ previous_tb -= tb_ticks_per_jiffy; + /* + * The stolen time calculation for POWER5 shared-processor LPAR + * systems works better if the two threads' timebase interrupts + * are staggered by half a jiffy with respect to each other. + */ for_each_cpu(i) { - if (i != boot_cpuid) { + if (i == boot_cpuid) + continue; + if (i == (boot_cpuid ^ 1)) + per_cpu(last_jiffy, i) = + per_cpu(last_jiffy, boot_cpuid) - half; + else if (i & 1) + per_cpu(last_jiffy, i) = + per_cpu(last_jiffy, i ^ 1) + half; + else { previous_tb += offset; per_cpu(last_jiffy, i) = previous_tb; } @@ -706,6 +937,7 @@ void __init time_init(void) tb_ticks_per_sec = ppc_tb_freq; tb_ticks_per_usec = ppc_tb_freq / 1000000; tb_to_us = mulhwu_scale_factor(ppc_tb_freq, 1000000); + calc_cputime_factors(); /* * Calculate the length of each tick in ns. It will not be -- cgit v1.2.3-18-g5258 From 2cf82c0256b198ae28c465f2c4d7c12c836ea5ea Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 27 Feb 2006 15:41:47 +1100 Subject: powerpc: Export variables used in conversions to/from cputime_t The inline cputime_to_foo and foo_to_cputime conversion functions in include/asm-powerpc/cputime.h refer to 5 variables, which need to be exported if those functions are to be usable from modules. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/time.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 0b34db28916..4f20a5f15d4 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -99,6 +99,7 @@ unsigned long tb_ticks_per_jiffy; unsigned long tb_ticks_per_usec = 100; /* sane default */ EXPORT_SYMBOL(tb_ticks_per_usec); unsigned long tb_ticks_per_sec; +EXPORT_SYMBOL(tb_ticks_per_sec); /* for cputime_t conversions */ u64 tb_to_xs; unsigned tb_to_us; @@ -143,9 +144,13 @@ DEFINE_PER_CPU(unsigned long, last_jiffy); * These are all stored as 0.64 fixed-point binary fractions. */ u64 __cputime_jiffies_factor; +EXPORT_SYMBOL(__cputime_jiffies_factor); u64 __cputime_msec_factor; +EXPORT_SYMBOL(__cputime_msec_factor); u64 __cputime_sec_factor; +EXPORT_SYMBOL(__cputime_sec_factor); u64 __cputime_clockt_factor; +EXPORT_SYMBOL(__cputime_clockt_factor); static void calc_cputime_factors(void) { -- cgit v1.2.3-18-g5258 From 7aa6ba41362a7f888ad11fdcfe51ca8d92226cd3 Mon Sep 17 00:00:00 2001 From: Jes Sorensen Date: Fri, 17 Feb 2006 05:18:43 -0500 Subject: [IA64-SGI] SN2-XP reduce kmalloc wrapper inlining Take advantage of kzalloc() as well as reduce the size of code generated for the error returns in xpc_setup_infrastructure(). Signed-off-by: Jes Sorensen Acked-by: Dean Nelson Signed-off-by: Tony Luck --- arch/ia64/sn/kernel/xpc_channel.c | 102 +++++++++++++++++++++--------------- arch/ia64/sn/kernel/xpc_main.c | 1 - arch/ia64/sn/kernel/xpc_partition.c | 28 +++++++++- 3 files changed, 85 insertions(+), 46 deletions(-) (limited to 'arch') diff --git a/arch/ia64/sn/kernel/xpc_channel.c b/arch/ia64/sn/kernel/xpc_channel.c index cdf6856ce08..d0abddd9ffe 100644 --- a/arch/ia64/sn/kernel/xpc_channel.c +++ b/arch/ia64/sn/kernel/xpc_channel.c @@ -21,7 +21,6 @@ #include #include #include -#include #include #include #include @@ -29,6 +28,31 @@ #include +/* + * Guarantee that the kzalloc'd memory is cacheline aligned. + */ +static void * +xpc_kzalloc_cacheline_aligned(size_t size, gfp_t flags, void **base) +{ + /* see if kzalloc will give us cachline aligned memory by default */ + *base = kzalloc(size, flags); + if (*base == NULL) { + return NULL; + } + if ((u64) *base == L1_CACHE_ALIGN((u64) *base)) { + return *base; + } + kfree(*base); + + /* nope, we'll have to do it ourselves */ + *base = kzalloc(size + L1_CACHE_BYTES, flags); + if (*base == NULL) { + return NULL; + } + return (void *) L1_CACHE_ALIGN((u64) *base); +} + + /* * Set up the initial values for the XPartition Communication channels. */ @@ -93,20 +117,19 @@ xpc_setup_infrastructure(struct xpc_partition *part) * Allocate all of the channel structures as a contiguous chunk of * memory. */ - part->channels = kmalloc(sizeof(struct xpc_channel) * XPC_NCHANNELS, + part->channels = kzalloc(sizeof(struct xpc_channel) * XPC_NCHANNELS, GFP_KERNEL); if (part->channels == NULL) { dev_err(xpc_chan, "can't get memory for channels\n"); return xpcNoMemory; } - memset(part->channels, 0, sizeof(struct xpc_channel) * XPC_NCHANNELS); part->nchannels = XPC_NCHANNELS; /* allocate all the required GET/PUT values */ - part->local_GPs = xpc_kmalloc_cacheline_aligned(XPC_GP_SIZE, + part->local_GPs = xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE, GFP_KERNEL, &part->local_GPs_base); if (part->local_GPs == NULL) { kfree(part->channels); @@ -115,55 +138,51 @@ xpc_setup_infrastructure(struct xpc_partition *part) "values\n"); return xpcNoMemory; } - memset(part->local_GPs, 0, XPC_GP_SIZE); - part->remote_GPs = xpc_kmalloc_cacheline_aligned(XPC_GP_SIZE, + part->remote_GPs = xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE, GFP_KERNEL, &part->remote_GPs_base); if (part->remote_GPs == NULL) { - kfree(part->channels); - part->channels = NULL; - kfree(part->local_GPs_base); - part->local_GPs = NULL; dev_err(xpc_chan, "can't get memory for remote get/put " "values\n"); + kfree(part->local_GPs_base); + part->local_GPs = NULL; + kfree(part->channels); + part->channels = NULL; return xpcNoMemory; } - memset(part->remote_GPs, 0, XPC_GP_SIZE); /* allocate all the required open and close args */ - part->local_openclose_args = xpc_kmalloc_cacheline_aligned( + part->local_openclose_args = xpc_kzalloc_cacheline_aligned( XPC_OPENCLOSE_ARGS_SIZE, GFP_KERNEL, &part->local_openclose_args_base); if (part->local_openclose_args == NULL) { - kfree(part->channels); - part->channels = NULL; - kfree(part->local_GPs_base); - part->local_GPs = NULL; + dev_err(xpc_chan, "can't get memory for local connect args\n"); kfree(part->remote_GPs_base); part->remote_GPs = NULL; - dev_err(xpc_chan, "can't get memory for local connect args\n"); + kfree(part->local_GPs_base); + part->local_GPs = NULL; + kfree(part->channels); + part->channels = NULL; return xpcNoMemory; } - memset(part->local_openclose_args, 0, XPC_OPENCLOSE_ARGS_SIZE); - part->remote_openclose_args = xpc_kmalloc_cacheline_aligned( + part->remote_openclose_args = xpc_kzalloc_cacheline_aligned( XPC_OPENCLOSE_ARGS_SIZE, GFP_KERNEL, &part->remote_openclose_args_base); if (part->remote_openclose_args == NULL) { - kfree(part->channels); - part->channels = NULL; - kfree(part->local_GPs_base); - part->local_GPs = NULL; - kfree(part->remote_GPs_base); - part->remote_GPs = NULL; + dev_err(xpc_chan, "can't get memory for remote connect args\n"); kfree(part->local_openclose_args_base); part->local_openclose_args = NULL; - dev_err(xpc_chan, "can't get memory for remote connect args\n"); + kfree(part->remote_GPs_base); + part->remote_GPs = NULL; + kfree(part->local_GPs_base); + part->local_GPs = NULL; + kfree(part->channels); + part->channels = NULL; return xpcNoMemory; } - memset(part->remote_openclose_args, 0, XPC_OPENCLOSE_ARGS_SIZE); xpc_initialize_channels(part, partid); @@ -186,18 +205,18 @@ xpc_setup_infrastructure(struct xpc_partition *part) ret = request_irq(SGI_XPC_NOTIFY, xpc_notify_IRQ_handler, SA_SHIRQ, part->IPI_owner, (void *) (u64) partid); if (ret != 0) { - kfree(part->channels); - part->channels = NULL; - kfree(part->local_GPs_base); - part->local_GPs = NULL; - kfree(part->remote_GPs_base); - part->remote_GPs = NULL; - kfree(part->local_openclose_args_base); - part->local_openclose_args = NULL; - kfree(part->remote_openclose_args_base); - part->remote_openclose_args = NULL; dev_err(xpc_chan, "can't register NOTIFY IRQ handler, " "errno=%d\n", -ret); + kfree(part->remote_openclose_args_base); + part->remote_openclose_args = NULL; + kfree(part->local_openclose_args_base); + part->local_openclose_args = NULL; + kfree(part->remote_GPs_base); + part->remote_GPs = NULL; + kfree(part->local_GPs_base); + part->local_GPs = NULL; + kfree(part->channels); + part->channels = NULL; return xpcLackOfResources; } @@ -446,22 +465,20 @@ xpc_allocate_local_msgqueue(struct xpc_channel *ch) for (nentries = ch->local_nentries; nentries > 0; nentries--) { nbytes = nentries * ch->msg_size; - ch->local_msgqueue = xpc_kmalloc_cacheline_aligned(nbytes, + ch->local_msgqueue = xpc_kzalloc_cacheline_aligned(nbytes, GFP_KERNEL, &ch->local_msgqueue_base); if (ch->local_msgqueue == NULL) { continue; } - memset(ch->local_msgqueue, 0, nbytes); nbytes = nentries * sizeof(struct xpc_notify); - ch->notify_queue = kmalloc(nbytes, GFP_KERNEL); + ch->notify_queue = kzalloc(nbytes, GFP_KERNEL); if (ch->notify_queue == NULL) { kfree(ch->local_msgqueue_base); ch->local_msgqueue = NULL; continue; } - memset(ch->notify_queue, 0, nbytes); spin_lock_irqsave(&ch->lock, irq_flags); if (nentries < ch->local_nentries) { @@ -501,13 +518,12 @@ xpc_allocate_remote_msgqueue(struct xpc_channel *ch) for (nentries = ch->remote_nentries; nentries > 0; nentries--) { nbytes = nentries * ch->msg_size; - ch->remote_msgqueue = xpc_kmalloc_cacheline_aligned(nbytes, + ch->remote_msgqueue = xpc_kzalloc_cacheline_aligned(nbytes, GFP_KERNEL, &ch->remote_msgqueue_base); if (ch->remote_msgqueue == NULL) { continue; } - memset(ch->remote_msgqueue, 0, nbytes); spin_lock_irqsave(&ch->lock, irq_flags); if (nentries < ch->remote_nentries) { diff --git a/arch/ia64/sn/kernel/xpc_main.c b/arch/ia64/sn/kernel/xpc_main.c index 8cbf1643257..99b123a6421 100644 --- a/arch/ia64/sn/kernel/xpc_main.c +++ b/arch/ia64/sn/kernel/xpc_main.c @@ -52,7 +52,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/ia64/sn/kernel/xpc_partition.c b/arch/ia64/sn/kernel/xpc_partition.c index 88a730e6cfd..94211429fd0 100644 --- a/arch/ia64/sn/kernel/xpc_partition.c +++ b/arch/ia64/sn/kernel/xpc_partition.c @@ -80,6 +80,31 @@ char ____cacheline_aligned xpc_remote_copy_buffer[XPC_RP_HEADER_SIZE + XP_NASID_MASK_BYTES]; +/* + * Guarantee that the kmalloc'd memory is cacheline aligned. + */ +static void * +xpc_kmalloc_cacheline_aligned(size_t size, gfp_t flags, void **base) +{ + /* see if kmalloc will give us cachline aligned memory by default */ + *base = kmalloc(size, flags); + if (*base == NULL) { + return NULL; + } + if ((u64) *base == L1_CACHE_ALIGN((u64) *base)) { + return *base; + } + kfree(*base); + + /* nope, we'll have to do it ourselves */ + *base = kmalloc(size + L1_CACHE_BYTES, flags); + if (*base == NULL) { + return NULL; + } + return (void *) L1_CACHE_ALIGN((u64) *base); +} + + /* * Given a nasid, get the physical address of the partition's reserved page * for that nasid. This function returns 0 on any error. @@ -1038,13 +1063,12 @@ xpc_discovery(void) remote_vars = (struct xpc_vars *) remote_rp; - discovered_nasids = kmalloc(sizeof(u64) * xp_nasid_mask_words, + discovered_nasids = kzalloc(sizeof(u64) * xp_nasid_mask_words, GFP_KERNEL); if (discovered_nasids == NULL) { kfree(remote_rp_base); return; } - memset(discovered_nasids, 0, sizeof(u64) * xp_nasid_mask_words); rp = (struct xpc_rsvd_page *) xpc_rsvd_page; -- cgit v1.2.3-18-g5258 From 2c906ae67b5b2fc3585230b16406400a363b42e4 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Tue, 28 Feb 2006 00:36:32 -0500 Subject: [CPUFREQ] Silence powernow-k8 warning on k7's. Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/powernow-k8.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c index e11a09207ec..3b3a94987d1 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c @@ -474,8 +474,10 @@ static int check_supported_cpu(unsigned int cpu) goto out; eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); + if ((eax & CPUID_XFAM) != CPUID_XFAM_K8) + goto out; + if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) || - ((eax & CPUID_XFAM) != CPUID_XFAM_K8) || ((eax & CPUID_XMOD) > CPUID_XMOD_REV_G)) { printk(KERN_INFO PFX "Processor cpuid %x not supported\n", eax); goto out; -- cgit v1.2.3-18-g5258 From 8ad5496d2359a19127ad9f2eda69485025c9917f Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Tue, 28 Feb 2006 00:37:44 -0500 Subject: [CPUFREQ] Remove duplicate cpuinfo struct We already have one of these declared, so use it, instead of declaring a second one for no good reason. Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c index c173c0fa117..b0ff9075708 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c @@ -479,15 +479,13 @@ static int centrino_cpu_init(struct cpufreq_policy *policy) unsigned l, h; int ret; int i; - struct cpuinfo_x86 *c = &cpu_data[policy->cpu]; /* Only Intel makes Enhanced Speedstep-capable CPUs */ if (cpu->x86_vendor != X86_VENDOR_INTEL || !cpu_has(cpu, X86_FEATURE_EST)) return -ENODEV; - if (cpu_has(c, X86_FEATURE_CONSTANT_TSC)) { + if (cpu_has(cpu, X86_FEATURE_CONSTANT_TSC)) centrino_driver.flags |= CPUFREQ_CONST_LOOPS; - } if (centrino_cpu_init_acpi(policy)) { if (policy->cpu != 0) -- cgit v1.2.3-18-g5258 From 32ee8c3e470d86588b51dc42ed01e85c5fa0f180 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Tue, 28 Feb 2006 00:43:23 -0500 Subject: [CPUFREQ] Lots of whitespace & CodingStyle cleanup. Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/Kconfig | 1 - arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c | 64 ++++----- arch/i386/kernel/cpu/cpufreq/elanfreq.c | 109 ++++++++------- arch/i386/kernel/cpu/cpufreq/gx-suspmod.c | 180 ++++++++++++------------- arch/i386/kernel/cpu/cpufreq/longhaul.h | 4 +- arch/i386/kernel/cpu/cpufreq/p4-clockmod.c | 24 ++-- arch/i386/kernel/cpu/cpufreq/powernow-k6.c | 16 +-- arch/i386/kernel/cpu/cpufreq/powernow-k7.c | 10 +- arch/i386/kernel/cpu/cpufreq/powernow-k8.c | 15 +-- arch/i386/kernel/cpu/cpufreq/powernow-k8.h | 6 +- arch/i386/kernel/cpu/cpufreq/speedstep-lib.c | 42 +++--- arch/i386/kernel/cpu/cpufreq/speedstep-lib.h | 20 +-- arch/i386/kernel/cpu/cpufreq/speedstep-smi.c | 49 ++++--- 13 files changed, 257 insertions(+), 283 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/cpufreq/Kconfig b/arch/i386/kernel/cpu/cpufreq/Kconfig index 26892d2099b..0f1eb507233 100644 --- a/arch/i386/kernel/cpu/cpufreq/Kconfig +++ b/arch/i386/kernel/cpu/cpufreq/Kconfig @@ -96,7 +96,6 @@ config X86_POWERNOW_K8_ACPI config X86_GX_SUSPMOD tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation" - depends on PCI help This add the CPUFreq driver for NatSemi Geode processors which support suspend modulation. diff --git a/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c b/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c index 2b62dee35c6..f275e0d4aee 100644 --- a/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c +++ b/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c @@ -39,7 +39,7 @@ static struct pci_dev *nforce2_chipset_dev; static int fid = 0; /* min_fsb, max_fsb: - * minimum and maximum FSB (= FSB at boot time) + * minimum and maximum FSB (= FSB at boot time) */ static int min_fsb = 0; static int max_fsb = 0; @@ -57,10 +57,10 @@ MODULE_PARM_DESC(min_fsb, #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "cpufreq-nforce2", msg) -/* +/** * nforce2_calc_fsb - calculate FSB * @pll: PLL value - * + * * Calculates FSB from PLL value */ static int nforce2_calc_fsb(int pll) @@ -76,10 +76,10 @@ static int nforce2_calc_fsb(int pll) return 0; } -/* +/** * nforce2_calc_pll - calculate PLL value * @fsb: FSB - * + * * Calculate PLL value for given FSB */ static int nforce2_calc_pll(unsigned int fsb) @@ -106,10 +106,10 @@ static int nforce2_calc_pll(unsigned int fsb) return NFORCE2_PLL(mul, div); } -/* +/** * nforce2_write_pll - write PLL value to chipset * @pll: PLL value - * + * * Writes new FSB PLL value to chipset */ static void nforce2_write_pll(int pll) @@ -121,15 +121,13 @@ static void nforce2_write_pll(int pll) pci_write_config_dword(nforce2_chipset_dev, NFORCE2_PLLADR, temp); /* Now write the value in all 64 registers */ - for (temp = 0; temp <= 0x3f; temp++) { - pci_write_config_dword(nforce2_chipset_dev, - NFORCE2_PLLREG, pll); - } + for (temp = 0; temp <= 0x3f; temp++) + pci_write_config_dword(nforce2_chipset_dev, NFORCE2_PLLREG, pll); return; } -/* +/** * nforce2_fsb_read - Read FSB * * Read FSB from chipset @@ -140,39 +138,32 @@ static unsigned int nforce2_fsb_read(int bootfsb) struct pci_dev *nforce2_sub5; u32 fsb, temp = 0; - /* Get chipset boot FSB from subdevice 5 (FSB at boot-time) */ nforce2_sub5 = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, - 0x01EF, - PCI_ANY_ID, - PCI_ANY_ID, - NULL); - + 0x01EF,PCI_ANY_ID,PCI_ANY_ID,NULL); if (!nforce2_sub5) return 0; pci_read_config_dword(nforce2_sub5, NFORCE2_BOOTFSB, &fsb); fsb /= 1000000; - + /* Check if PLL register is already set */ - pci_read_config_byte(nforce2_chipset_dev, - NFORCE2_PLLENABLE, (u8 *)&temp); - + pci_read_config_byte(nforce2_chipset_dev,NFORCE2_PLLENABLE, (u8 *)&temp); + if(bootfsb || !temp) return fsb; /* Use PLL register FSB value */ - pci_read_config_dword(nforce2_chipset_dev, - NFORCE2_PLLREG, &temp); + pci_read_config_dword(nforce2_chipset_dev,NFORCE2_PLLREG, &temp); fsb = nforce2_calc_fsb(temp); return fsb; } -/* +/** * nforce2_set_fsb - set new FSB * @fsb: New FSB - * + * * Sets new FSB */ static int nforce2_set_fsb(unsigned int fsb) @@ -186,7 +177,7 @@ static int nforce2_set_fsb(unsigned int fsb) printk(KERN_ERR "cpufreq: FSB %d is out of range!\n", fsb); return -EINVAL; } - + tfsb = nforce2_fsb_read(0); if (!tfsb) { printk(KERN_ERR "cpufreq: Error while reading the FSB\n"); @@ -194,8 +185,7 @@ static int nforce2_set_fsb(unsigned int fsb) } /* First write? Then set actual value */ - pci_read_config_byte(nforce2_chipset_dev, - NFORCE2_PLLENABLE, (u8 *)&temp); + pci_read_config_byte(nforce2_chipset_dev,NFORCE2_PLLENABLE, (u8 *)&temp); if (!temp) { pll = nforce2_calc_pll(tfsb); @@ -223,7 +213,7 @@ static int nforce2_set_fsb(unsigned int fsb) /* Calculate the PLL reg. value */ if ((pll = nforce2_calc_pll(tfsb)) == -1) return -EINVAL; - + nforce2_write_pll(pll); #ifdef NFORCE2_DELAY mdelay(NFORCE2_DELAY); @@ -239,7 +229,7 @@ static int nforce2_set_fsb(unsigned int fsb) /** * nforce2_get - get the CPU frequency * @cpu: CPU number - * + * * Returns the CPU frequency */ static unsigned int nforce2_get(unsigned int cpu) @@ -354,10 +344,10 @@ static int nforce2_cpu_init(struct cpufreq_policy *policy) printk(KERN_INFO "cpufreq: FSB currently at %i MHz, FID %d.%d\n", fsb, fid / 10, fid % 10); - + /* Set maximum FSB to FSB at boot time */ max_fsb = nforce2_fsb_read(1); - + if(!max_fsb) return -EIO; @@ -398,17 +388,15 @@ static struct cpufreq_driver nforce2_driver = { * nforce2_detect_chipset - detect the Southbridge which contains FSB PLL logic * * Detects nForce2 A2 and C1 stepping - * + * */ static unsigned int nforce2_detect_chipset(void) { u8 revision; nforce2_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, - PCI_DEVICE_ID_NVIDIA_NFORCE2, - PCI_ANY_ID, - PCI_ANY_ID, - NULL); + PCI_DEVICE_ID_NVIDIA_NFORCE2, + PCI_ANY_ID, PCI_ANY_ID, NULL); if (nforce2_chipset_dev == NULL) return -ENODEV; diff --git a/arch/i386/kernel/cpu/cpufreq/elanfreq.c b/arch/i386/kernel/cpu/cpufreq/elanfreq.c index 3f7caa4ae6d..f317276afa7 100644 --- a/arch/i386/kernel/cpu/cpufreq/elanfreq.c +++ b/arch/i386/kernel/cpu/cpufreq/elanfreq.c @@ -1,16 +1,16 @@ /* - * elanfreq: cpufreq driver for the AMD ELAN family + * elanfreq: cpufreq driver for the AMD ELAN family * * (c) Copyright 2002 Robert Schwebel * - * Parts of this code are (c) Sven Geggus + * Parts of this code are (c) Sven Geggus * - * All Rights Reserved. + * All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. + * 2 of the License, or (at your option) any later version. * * 2002-02-13: - initial revision for 2.4.18-pre9 by Robert Schwebel * @@ -28,7 +28,7 @@ #include #include -#define REG_CSCIR 0x22 /* Chip Setup and Control Index Register */ +#define REG_CSCIR 0x22 /* Chip Setup and Control Index Register */ #define REG_CSCDR 0x23 /* Chip Setup and Control Data Register */ /* Module parameter */ @@ -41,7 +41,7 @@ struct s_elan_multiplier { }; /* - * It is important that the frequencies + * It is important that the frequencies * are listed in ascending order here! */ struct s_elan_multiplier elan_multiplier[] = { @@ -72,78 +72,79 @@ static struct cpufreq_frequency_table elanfreq_table[] = { * elanfreq_get_cpu_frequency: determine current cpu speed * * Finds out at which frequency the CPU of the Elan SOC runs - * at the moment. Frequencies from 1 to 33 MHz are generated + * at the moment. Frequencies from 1 to 33 MHz are generated * the normal way, 66 and 99 MHz are called "Hyperspeed Mode" - * and have the rest of the chip running with 33 MHz. + * and have the rest of the chip running with 33 MHz. */ static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu) { - u8 clockspeed_reg; /* Clock Speed Register */ - + u8 clockspeed_reg; /* Clock Speed Register */ + local_irq_disable(); - outb_p(0x80,REG_CSCIR); - clockspeed_reg = inb_p(REG_CSCDR); + outb_p(0x80,REG_CSCIR); + clockspeed_reg = inb_p(REG_CSCDR); local_irq_enable(); - if ((clockspeed_reg & 0xE0) == 0xE0) { return 0; } + if ((clockspeed_reg & 0xE0) == 0xE0) + return 0; - /* Are we in CPU clock multiplied mode (66/99 MHz)? */ - if ((clockspeed_reg & 0xE0) == 0xC0) { - if ((clockspeed_reg & 0x01) == 0) { + /* Are we in CPU clock multiplied mode (66/99 MHz)? */ + if ((clockspeed_reg & 0xE0) == 0xC0) { + if ((clockspeed_reg & 0x01) == 0) return 66000; - } else { - return 99000; - } - } + else + return 99000; + } /* 33 MHz is not 32 MHz... */ if ((clockspeed_reg & 0xE0)==0xA0) return 33000; - return ((1<<((clockspeed_reg & 0xE0) >> 5)) * 1000); + return ((1<<((clockspeed_reg & 0xE0) >> 5)) * 1000); } /** - * elanfreq_set_cpu_frequency: Change the CPU core frequency - * @cpu: cpu number + * elanfreq_set_cpu_frequency: Change the CPU core frequency + * @cpu: cpu number * @freq: frequency in kHz * - * This function takes a frequency value and changes the CPU frequency + * This function takes a frequency value and changes the CPU frequency * according to this. Note that the frequency has to be checked by * elanfreq_validatespeed() for correctness! - * - * There is no return value. + * + * There is no return value. */ -static void elanfreq_set_cpu_state (unsigned int state) { - +static void elanfreq_set_cpu_state (unsigned int state) +{ struct cpufreq_freqs freqs; freqs.old = elanfreq_get_cpu_frequency(0); freqs.new = elan_multiplier[state].clock; freqs.cpu = 0; /* elanfreq.c is UP only driver */ - + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - printk(KERN_INFO "elanfreq: attempting to set frequency to %i kHz\n",elan_multiplier[state].clock); + printk(KERN_INFO "elanfreq: attempting to set frequency to %i kHz\n", + elan_multiplier[state].clock); - /* - * Access to the Elan's internal registers is indexed via - * 0x22: Chip Setup & Control Register Index Register (CSCI) - * 0x23: Chip Setup & Control Register Data Register (CSCD) + /* + * Access to the Elan's internal registers is indexed via + * 0x22: Chip Setup & Control Register Index Register (CSCI) + * 0x23: Chip Setup & Control Register Data Register (CSCD) * */ - /* - * 0x40 is the Power Management Unit's Force Mode Register. + /* + * 0x40 is the Power Management Unit's Force Mode Register. * Bit 6 enables Hyperspeed Mode (66/100 MHz core frequency) */ local_irq_disable(); - outb_p(0x40,REG_CSCIR); /* Disable hyperspeed mode */ + outb_p(0x40,REG_CSCIR); /* Disable hyperspeed mode */ outb_p(0x00,REG_CSCDR); local_irq_enable(); /* wait till internal pipelines and */ udelay(1000); /* buffers have cleaned up */ @@ -166,10 +167,10 @@ static void elanfreq_set_cpu_state (unsigned int state) { /** * elanfreq_validatespeed: test if frequency range is valid - * @policy: the policy to validate + * @policy: the policy to validate * - * This function checks if a given frequency range in kHz is valid - * for the hardware supported by the driver. + * This function checks if a given frequency range in kHz is valid + * for the hardware supported by the driver. */ static int elanfreq_verify (struct cpufreq_policy *policy) @@ -177,11 +178,11 @@ static int elanfreq_verify (struct cpufreq_policy *policy) return cpufreq_frequency_table_verify(policy, &elanfreq_table[0]); } -static int elanfreq_target (struct cpufreq_policy *policy, - unsigned int target_freq, +static int elanfreq_target (struct cpufreq_policy *policy, + unsigned int target_freq, unsigned int relation) { - unsigned int newstate = 0; + unsigned int newstate = 0; if (cpufreq_frequency_table_target(policy, &elanfreq_table[0], target_freq, relation, &newstate)) return -EINVAL; @@ -212,7 +213,7 @@ static int elanfreq_cpu_init(struct cpufreq_policy *policy) max_freq = elanfreq_get_cpu_frequency(0); /* table init */ - for (i=0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) { + for (i=0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) { if (elanfreq_table[i].frequency > max_freq) elanfreq_table[i].frequency = CPUFREQ_ENTRY_INVALID; } @@ -226,8 +227,7 @@ static int elanfreq_cpu_init(struct cpufreq_policy *policy) if (result) return (result); - cpufreq_frequency_table_get_attr(elanfreq_table, policy->cpu); - + cpufreq_frequency_table_get_attr(elanfreq_table, policy->cpu); return 0; } @@ -268,9 +268,9 @@ static struct freq_attr* elanfreq_attr[] = { static struct cpufreq_driver elanfreq_driver = { - .get = elanfreq_get_cpu_frequency, - .verify = elanfreq_verify, - .target = elanfreq_target, + .get = elanfreq_get_cpu_frequency, + .verify = elanfreq_verify, + .target = elanfreq_target, .init = elanfreq_cpu_init, .exit = elanfreq_cpu_exit, .name = "elanfreq", @@ -279,23 +279,21 @@ static struct cpufreq_driver elanfreq_driver = { }; -static int __init elanfreq_init(void) -{ +static int __init elanfreq_init(void) +{ struct cpuinfo_x86 *c = cpu_data; /* Test if we have the right hardware */ if ((c->x86_vendor != X86_VENDOR_AMD) || - (c->x86 != 4) || (c->x86_model!=10)) - { + (c->x86 != 4) || (c->x86_model!=10)) { printk(KERN_INFO "elanfreq: error: no Elan processor found!\n"); return -ENODEV; } - return cpufreq_register_driver(&elanfreq_driver); } -static void __exit elanfreq_exit(void) +static void __exit elanfreq_exit(void) { cpufreq_unregister_driver(&elanfreq_driver); } @@ -309,4 +307,3 @@ MODULE_DESCRIPTION("cpufreq driver for AMD's Elan CPUs"); module_init(elanfreq_init); module_exit(elanfreq_exit); - diff --git a/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c b/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c index e86ea486c31..65b8fa2b0ee 100644 --- a/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c +++ b/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c @@ -6,12 +6,12 @@ * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation + * version 2 as published by the Free Software Foundation * * The author(s) of this software shall not be held liable for damages * of any nature resulting due to the use of this software. This * software is provided AS-IS with no warranties. - * + * * Theoritical note: * * (see Geode(tm) CS5530 manual (rev.4.1) page.56) @@ -21,18 +21,18 @@ * * Suspend Modulation works by asserting and de-asserting the SUSP# pin * to CPU(GX1/GXLV) for configurable durations. When asserting SUSP# - * the CPU enters an idle state. GX1 stops its core clock when SUSP# is + * the CPU enters an idle state. GX1 stops its core clock when SUSP# is * asserted then power consumption is reduced. * - * Suspend Modulation's OFF/ON duration are configurable + * Suspend Modulation's OFF/ON duration are configurable * with 'Suspend Modulation OFF Count Register' * and 'Suspend Modulation ON Count Register'. - * These registers are 8bit counters that represent the number of + * These registers are 8bit counters that represent the number of * 32us intervals which the SUSP# pin is asserted(ON)/de-asserted(OFF) * to the processor. * - * These counters define a ratio which is the effective frequency - * of operation of the system. + * These counters define a ratio which is the effective frequency + * of operation of the system. * * OFF Count * F_eff = Fgx * ---------------------- @@ -40,24 +40,24 @@ * * 0 <= On Count, Off Count <= 255 * - * From these limits, we can get register values + * From these limits, we can get register values * * off_duration + on_duration <= MAX_DURATION * on_duration = off_duration * (stock_freq - freq) / freq * - * off_duration = (freq * DURATION) / stock_freq - * on_duration = DURATION - off_duration + * off_duration = (freq * DURATION) / stock_freq + * on_duration = DURATION - off_duration * * *--------------------------------------------------------------------------- * * ChangeLog: - * Dec. 12, 2003 Hiroshi Miura - * - fix on/off register mistake - * - fix cpu_khz calc when it stops cpu modulation. + * Dec. 12, 2003 Hiroshi Miura + * - fix on/off register mistake + * - fix cpu_khz calc when it stops cpu modulation. * - * Dec. 11, 2002 Hiroshi Miura - * - rewrite for Cyrix MediaGX Cx5510/5520 and + * Dec. 11, 2002 Hiroshi Miura + * - rewrite for Cyrix MediaGX Cx5510/5520 and * NatSemi Geode Cs5530(A). * * Jul. ??, 2002 Zwane Mwaikambo @@ -74,40 +74,40 @@ ************************************************************************/ #include -#include +#include #include #include #include #include -#include +#include #include /* PCI config registers, all at F0 */ -#define PCI_PMER1 0x80 /* power management enable register 1 */ -#define PCI_PMER2 0x81 /* power management enable register 2 */ -#define PCI_PMER3 0x82 /* power management enable register 3 */ -#define PCI_IRQTC 0x8c /* irq speedup timer counter register:typical 2 to 4ms */ -#define PCI_VIDTC 0x8d /* video speedup timer counter register: typical 50 to 100ms */ -#define PCI_MODOFF 0x94 /* suspend modulation OFF counter register, 1 = 32us */ -#define PCI_MODON 0x95 /* suspend modulation ON counter register */ -#define PCI_SUSCFG 0x96 /* suspend configuration register */ +#define PCI_PMER1 0x80 /* power management enable register 1 */ +#define PCI_PMER2 0x81 /* power management enable register 2 */ +#define PCI_PMER3 0x82 /* power management enable register 3 */ +#define PCI_IRQTC 0x8c /* irq speedup timer counter register:typical 2 to 4ms */ +#define PCI_VIDTC 0x8d /* video speedup timer counter register: typical 50 to 100ms */ +#define PCI_MODOFF 0x94 /* suspend modulation OFF counter register, 1 = 32us */ +#define PCI_MODON 0x95 /* suspend modulation ON counter register */ +#define PCI_SUSCFG 0x96 /* suspend configuration register */ /* PMER1 bits */ -#define GPM (1<<0) /* global power management */ -#define GIT (1<<1) /* globally enable PM device idle timers */ -#define GTR (1<<2) /* globally enable IO traps */ -#define IRQ_SPDUP (1<<3) /* disable clock throttle during interrupt handling */ -#define VID_SPDUP (1<<4) /* disable clock throttle during vga video handling */ +#define GPM (1<<0) /* global power management */ +#define GIT (1<<1) /* globally enable PM device idle timers */ +#define GTR (1<<2) /* globally enable IO traps */ +#define IRQ_SPDUP (1<<3) /* disable clock throttle during interrupt handling */ +#define VID_SPDUP (1<<4) /* disable clock throttle during vga video handling */ /* SUSCFG bits */ -#define SUSMOD (1<<0) /* enable/disable suspend modulation */ -/* the belows support only with cs5530 (after rev.1.2)/cs5530A */ -#define SMISPDUP (1<<1) /* select how SMI re-enable suspend modulation: */ - /* IRQTC timer or read SMI speedup disable reg.(F1BAR[08-09h]) */ -#define SUSCFG (1<<2) /* enable powering down a GXLV processor. "Special 3Volt Suspend" mode */ -/* the belows support only with cs5530A */ -#define PWRSVE_ISA (1<<3) /* stop ISA clock */ -#define PWRSVE (1<<4) /* active idle */ +#define SUSMOD (1<<0) /* enable/disable suspend modulation */ +/* the belows support only with cs5530 (after rev.1.2)/cs5530A */ +#define SMISPDUP (1<<1) /* select how SMI re-enable suspend modulation: */ + /* IRQTC timer or read SMI speedup disable reg.(F1BAR[08-09h]) */ +#define SUSCFG (1<<2) /* enable powering down a GXLV processor. "Special 3Volt Suspend" mode */ +/* the belows support only with cs5530A */ +#define PWRSVE_ISA (1<<3) /* stop ISA clock */ +#define PWRSVE (1<<4) /* active idle */ struct gxfreq_params { u8 on_duration; @@ -128,7 +128,7 @@ module_param (pci_busclk, int, 0444); /* maximum duration for which the cpu may be suspended * (32us * MAX_DURATION). If no parameter is given, this defaults - * to 255. + * to 255. * Note that this leads to a maximum of 8 ms(!) where the CPU clock * is suspended -- processing power is just 0.39% of what it used to be, * though. 781.25 kHz(!) for a 200 MHz processor -- wow. */ @@ -144,17 +144,17 @@ module_param (max_duration, int, 0444); #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "gx-suspmod", msg) /** - * we can detect a core multipiler from dir0_lsb - * from GX1 datasheet p.56, - * MULT[3:0]: - * 0000 = SYSCLK multiplied by 4 (test only) - * 0001 = SYSCLK multiplied by 10 - * 0010 = SYSCLK multiplied by 4 - * 0011 = SYSCLK multiplied by 6 - * 0100 = SYSCLK multiplied by 9 - * 0101 = SYSCLK multiplied by 5 - * 0110 = SYSCLK multiplied by 7 - * 0111 = SYSCLK multiplied by 8 + * we can detect a core multipiler from dir0_lsb + * from GX1 datasheet p.56, + * MULT[3:0]: + * 0000 = SYSCLK multiplied by 4 (test only) + * 0001 = SYSCLK multiplied by 10 + * 0010 = SYSCLK multiplied by 4 + * 0011 = SYSCLK multiplied by 6 + * 0100 = SYSCLK multiplied by 9 + * 0101 = SYSCLK multiplied by 5 + * 0110 = SYSCLK multiplied by 7 + * 0111 = SYSCLK multiplied by 8 * of 33.3MHz **/ static int gx_freq_mult[16] = { @@ -164,17 +164,17 @@ static int gx_freq_mult[16] = { /**************************************************************** - * Low Level chipset interface * + * Low Level chipset interface * ****************************************************************/ static struct pci_device_id gx_chipset_tbl[] __initdata = { - { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510, PCI_ANY_ID, PCI_ANY_ID }, - { 0, }, + { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510, PCI_ANY_ID, PCI_ANY_ID }, + { 0, }, }; /** - * gx_detect_chipset: + * gx_detect_chipset: * **/ static __init struct pci_dev *gx_detect_chipset(void) @@ -182,17 +182,16 @@ static __init struct pci_dev *gx_detect_chipset(void) struct pci_dev *gx_pci = NULL; /* check if CPU is a MediaGX or a Geode. */ - if ((current_cpu_data.x86_vendor != X86_VENDOR_NSC) && + if ((current_cpu_data.x86_vendor != X86_VENDOR_NSC) && (current_cpu_data.x86_vendor != X86_VENDOR_CYRIX)) { dprintk("error: no MediaGX/Geode processor found!\n"); - return NULL; + return NULL; } /* detect which companion chip is used */ while ((gx_pci = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, gx_pci)) != NULL) { - if ((pci_match_id(gx_chipset_tbl, gx_pci)) != NULL) { + if ((pci_match_id(gx_chipset_tbl, gx_pci)) != NULL) return gx_pci; - } } dprintk("error: no supported chipset found!\n"); @@ -200,24 +199,24 @@ static __init struct pci_dev *gx_detect_chipset(void) } /** - * gx_get_cpuspeed: + * gx_get_cpuspeed: * * Finds out at which efficient frequency the Cyrix MediaGX/NatSemi Geode CPU runs. */ static unsigned int gx_get_cpuspeed(unsigned int cpu) { - if ((gx_params->pci_suscfg & SUSMOD) == 0) + if ((gx_params->pci_suscfg & SUSMOD) == 0) return stock_freq; - return (stock_freq * gx_params->off_duration) + return (stock_freq * gx_params->off_duration) / (gx_params->on_duration + gx_params->off_duration); } /** * gx_validate_speed: * determine current cpu speed - * -**/ + * + **/ static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, u8 *off_duration) { @@ -230,7 +229,7 @@ static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, u8 *off *on_duration=0; for (i=max_duration; i>0; i--) { - tmp_off = ((khz * i) / stock_freq) & 0xff; + tmp_off = ((khz * i) / stock_freq) & 0xff; tmp_on = i - tmp_off; tmp_freq = (stock_freq * tmp_off) / i; /* if this relation is closer to khz, use this. If it's equal, @@ -247,18 +246,17 @@ static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, u8 *off /** - * gx_set_cpuspeed: - * set cpu speed in khz. + * gx_set_cpuspeed: + * set cpu speed in khz. **/ static void gx_set_cpuspeed(unsigned int khz) { - u8 suscfg, pmer1; + u8 suscfg, pmer1; unsigned int new_khz; unsigned long flags; struct cpufreq_freqs freqs; - freqs.cpu = 0; freqs.old = gx_get_cpuspeed(0); @@ -303,18 +301,18 @@ static void gx_set_cpuspeed(unsigned int khz) pci_write_config_byte(gx_params->cs55x0, PCI_MODOFF, gx_params->off_duration); pci_write_config_byte(gx_params->cs55x0, PCI_MODON, gx_params->on_duration); - pci_write_config_byte(gx_params->cs55x0, PCI_SUSCFG, suscfg); - pci_read_config_byte(gx_params->cs55x0, PCI_SUSCFG, &suscfg); + pci_write_config_byte(gx_params->cs55x0, PCI_SUSCFG, suscfg); + pci_read_config_byte(gx_params->cs55x0, PCI_SUSCFG, &suscfg); - local_irq_restore(flags); + local_irq_restore(flags); gx_params->pci_suscfg = suscfg; cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - dprintk("suspend modulation w/ duration of ON:%d us, OFF:%d us\n", - gx_params->on_duration * 32, gx_params->off_duration * 32); - dprintk("suspend modulation w/ clock speed: %d kHz.\n", freqs.new); + dprintk("suspend modulation w/ duration of ON:%d us, OFF:%d us\n", + gx_params->on_duration * 32, gx_params->off_duration * 32); + dprintk("suspend modulation w/ clock speed: %d kHz.\n", freqs.new); } /**************************************************************** @@ -322,10 +320,10 @@ static void gx_set_cpuspeed(unsigned int khz) ****************************************************************/ /* - * cpufreq_gx_verify: test if frequency range is valid + * cpufreq_gx_verify: test if frequency range is valid * - * This function checks if a given frequency range in kHz is valid - * for the hardware supported by the driver. + * This function checks if a given frequency range in kHz is valid + * for the hardware supported by the driver. */ static int cpufreq_gx_verify(struct cpufreq_policy *policy) @@ -333,8 +331,8 @@ static int cpufreq_gx_verify(struct cpufreq_policy *policy) unsigned int tmp_freq = 0; u8 tmp1, tmp2; - if (!stock_freq || !policy) - return -EINVAL; + if (!stock_freq || !policy) + return -EINVAL; policy->cpu = 0; cpufreq_verify_within_limits(policy, (stock_freq / max_duration), stock_freq); @@ -342,14 +340,14 @@ static int cpufreq_gx_verify(struct cpufreq_policy *policy) /* it needs to be assured that at least one supported frequency is * within policy->min and policy->max. If it is not, policy->max * needs to be increased until one freuqency is supported. - * policy->min may not be decreased, though. This way we guarantee a + * policy->min may not be decreased, though. This way we guarantee a * specific processing capacity. */ tmp_freq = gx_validate_speed(policy->min, &tmp1, &tmp2); - if (tmp_freq < policy->min) + if (tmp_freq < policy->min) tmp_freq += stock_freq / max_duration; policy->min = tmp_freq; - if (policy->min > policy->max) + if (policy->min > policy->max) policy->max = tmp_freq; tmp_freq = gx_validate_speed(policy->max, &tmp1, &tmp2); if (tmp_freq > policy->max) @@ -358,12 +356,12 @@ static int cpufreq_gx_verify(struct cpufreq_policy *policy) if (policy->max < policy->min) policy->max = policy->min; cpufreq_verify_within_limits(policy, (stock_freq / max_duration), stock_freq); - + return 0; } /* - * cpufreq_gx_target: + * cpufreq_gx_target: * */ static int cpufreq_gx_target(struct cpufreq_policy *policy, @@ -373,8 +371,8 @@ static int cpufreq_gx_target(struct cpufreq_policy *policy, u8 tmp1, tmp2; unsigned int tmp_freq; - if (!stock_freq || !policy) - return -EINVAL; + if (!stock_freq || !policy) + return -EINVAL; policy->cpu = 0; @@ -431,7 +429,7 @@ static int cpufreq_gx_cpu_init(struct cpufreq_policy *policy) return 0; } -/* +/* * cpufreq_gx_init: * MediaGX/Geode GX initialize cpufreq driver */ @@ -452,7 +450,7 @@ static int __init cpufreq_gx_init(void) u32 class_rev; /* Test if we have the right hardware */ - if ((gx_pci = gx_detect_chipset()) == NULL) + if ((gx_pci = gx_detect_chipset()) == NULL) return -ENODEV; /* check whether module parameters are sane */ @@ -478,7 +476,7 @@ static int __init cpufreq_gx_init(void) pci_read_config_dword(params->cs55x0, PCI_CLASS_REVISION, &class_rev); params->pci_rev = class_rev && 0xff; - if ((ret = cpufreq_register_driver(&gx_suspmod_driver))) { + if ((ret = cpufreq_register_driver(&gx_suspmod_driver))) { kfree(params); return ret; /* register error! */ } diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.h b/arch/i386/kernel/cpu/cpufreq/longhaul.h index 2a495c162ec..d3a95d77ee8 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.h +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.h @@ -234,7 +234,7 @@ static int __initdata ezrat_eblcr[32] = { /* * VIA C3 Nehemiah */ - + static int __initdata nehemiah_a_clock_ratio[32] = { 100, /* 0000 -> 10.0x */ 160, /* 0001 -> 16.0x */ @@ -446,7 +446,7 @@ static int __initdata nehemiah_c_eblcr[32] = { /* end of table */ }; -/* +/* * Voltage scales. Div/Mod by 1000 to get actual voltage. * Which scale to use depends on the VRM type in use. */ diff --git a/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c b/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c index cc73a7ae34b..0e1fc5c4524 100644 --- a/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c +++ b/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c @@ -14,7 +14,7 @@ * The author(s) of this software shall not be held liable for damages * of any nature resulting due to the use of this software. This * software is provided AS-IS with no warranties. - * + * * Date Errata Description * 20020525 N44, O17 12.5% or 25% DC causes lockup * @@ -22,7 +22,7 @@ #include #include -#include +#include #include #include #include @@ -30,7 +30,7 @@ #include #include /* current / set_cpus_allowed() */ -#include +#include #include #include @@ -79,7 +79,7 @@ static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate) } else { dprintk("CPU#%d setting duty cycle to %d%%\n", cpu, ((125 * newstate) / 10)); - /* bits 63 - 5 : reserved + /* bits 63 - 5 : reserved * bit 4 : enable/disable * bits 3-1 : duty cycle * bit 0 : reserved @@ -132,7 +132,7 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy, } /* run on each logical CPU, see section 13.15.3 of IA32 Intel Architecture Software - * Developer's Manual, Volume 3 + * Developer's Manual, Volume 3 */ cpus_allowed = current->cpus_allowed; @@ -206,7 +206,7 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c) return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_P4D); } - + static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy) { @@ -234,7 +234,7 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy) dprintk("has errata -- disabling frequencies lower than 2ghz\n"); break; } - + /* get max frequency */ stock_freq = cpufreq_p4_get_frequency(c); if (!stock_freq) @@ -250,7 +250,7 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy) p4clockmod_table[i].frequency = (stock_freq * i)/8; } cpufreq_frequency_table_get_attr(p4clockmod_table, policy->cpu); - + /* cpuinfo and default policy values */ policy->governor = CPUFREQ_DEFAULT_GOVERNOR; policy->cpuinfo.transition_latency = 1000000; /* assumed */ @@ -262,7 +262,7 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy) static int cpufreq_p4_cpu_exit(struct cpufreq_policy *policy) { - cpufreq_frequency_table_put_attr(policy->cpu); + cpufreq_frequency_table_put_attr(policy->cpu); return 0; } @@ -298,7 +298,7 @@ static struct freq_attr* p4clockmod_attr[] = { }; static struct cpufreq_driver p4clockmod_driver = { - .verify = cpufreq_p4_verify, + .verify = cpufreq_p4_verify, .target = cpufreq_p4_target, .init = cpufreq_p4_cpu_init, .exit = cpufreq_p4_cpu_exit, @@ -310,12 +310,12 @@ static struct cpufreq_driver p4clockmod_driver = { static int __init cpufreq_p4_init(void) -{ +{ struct cpuinfo_x86 *c = cpu_data; int ret; /* - * THERM_CONTROL is architectural for IA32 now, so + * THERM_CONTROL is architectural for IA32 now, so * we can rely on the capability checks */ if (c->x86_vendor != X86_VENDOR_INTEL) diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k6.c b/arch/i386/kernel/cpu/cpufreq/powernow-k6.c index 222f8cfe3c5..f89524051e4 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k6.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k6.c @@ -8,7 +8,7 @@ */ #include -#include +#include #include #include #include @@ -50,7 +50,7 @@ static int powernow_k6_get_cpu_multiplier(void) { u64 invalue = 0; u32 msrval; - + msrval = POWERNOW_IOPORT + 0x1; wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */ invalue=inl(POWERNOW_IOPORT + 0x8); @@ -81,7 +81,7 @@ static void powernow_k6_set_state (unsigned int best_i) freqs.old = busfreq * powernow_k6_get_cpu_multiplier(); freqs.new = busfreq * clock_ratio[best_i].index; freqs.cpu = 0; /* powernow-k6.c is UP only driver */ - + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); /* we now need to transform best_i to the BVC format, see AMD#23446 */ @@ -152,7 +152,7 @@ static int powernow_k6_cpu_init(struct cpufreq_policy *policy) busfreq = cpu_khz / max_multiplier; /* table init */ - for (i=0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) { + for (i=0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) { if (clock_ratio[i].index > max_multiplier) clock_ratio[i].frequency = CPUFREQ_ENTRY_INVALID; else @@ -182,7 +182,7 @@ static int powernow_k6_cpu_exit(struct cpufreq_policy *policy) powernow_k6_set_state(i); } cpufreq_frequency_table_put_attr(policy->cpu); - return 0; + return 0; } static unsigned int powernow_k6_get(unsigned int cpu) @@ -196,8 +196,8 @@ static struct freq_attr* powernow_k6_attr[] = { }; static struct cpufreq_driver powernow_k6_driver = { - .verify = powernow_k6_verify, - .target = powernow_k6_target, + .verify = powernow_k6_verify, + .target = powernow_k6_target, .init = powernow_k6_cpu_init, .exit = powernow_k6_cpu_exit, .get = powernow_k6_get, @@ -215,7 +215,7 @@ static struct cpufreq_driver powernow_k6_driver = { * on success. */ static int __init powernow_k6_init(void) -{ +{ struct cpuinfo_x86 *c = cpu_data; if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 != 5) || diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c index edcd626001d..2bf4237cb94 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c @@ -199,8 +199,8 @@ static int get_ranges (unsigned char *pst) powernow_table[j].index |= (vid << 8); /* upper 8 bits */ dprintk (" FID: 0x%x (%d.%dx [%dMHz]) " - "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, - fid_codes[fid] % 10, speed/1000, vid, + "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, + fid_codes[fid] % 10, speed/1000, vid, mobile_vid_table[vid]/1000, mobile_vid_table[vid]%1000); } @@ -368,8 +368,8 @@ static int powernow_acpi_init(void) } dprintk (" FID: 0x%x (%d.%dx [%dMHz]) " - "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, - fid_codes[fid] % 10, speed/1000, vid, + "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, + fid_codes[fid] % 10, speed/1000, vid, mobile_vid_table[vid]/1000, mobile_vid_table[vid]%1000); @@ -460,7 +460,7 @@ static int powernow_decode_bios (int maxfid, int startvid) (maxfid==pst->maxfid) && (startvid==pst->startvid)) { dprintk ("PST:%d (@%p)\n", i, pst); - dprintk (" cpuid: 0x%x fsb: %d maxFID: 0x%x startvid: 0x%x\n", + dprintk (" cpuid: 0x%x fsb: %d maxFID: 0x%x startvid: 0x%x\n", pst->cpuid, pst->fsbspeed, pst->maxfid, pst->startvid); ret = get_ranges ((char *) pst + sizeof (struct pst_s)); diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c index 3b3a94987d1..e85e90524df 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c @@ -83,11 +83,10 @@ static u32 find_millivolts_from_vid(struct powernow_k8_data *data, u32 vid) */ static u32 convert_fid_to_vco_fid(u32 fid) { - if (fid < HI_FID_TABLE_BOTTOM) { + if (fid < HI_FID_TABLE_BOTTOM) return 8 + (2 * fid); - } else { + else return fid; - } } /* @@ -177,7 +176,7 @@ static int write_new_fid(struct powernow_k8_data *data, u32 fid) if (i++ > 100) { printk(KERN_ERR PFX "internal error - pending bit very stuck - no further pstate changes possible\n"); return 1; - } + } } while (query_current_values_with_pending_wait(data)); count_off_irt(data); @@ -782,9 +781,7 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) /* verify only 1 entry from the lo frequency table */ if (fid < HI_FID_TABLE_BOTTOM) { if (cntlofreq) { - /* if both entries are the same, ignore this - * one... - */ + /* if both entries are the same, ignore this one ... */ if ((powernow_table[i].frequency != powernow_table[cntlofreq].frequency) || (powernow_table[i].index != powernow_table[cntlofreq].index)) { printk(KERN_ERR PFX "Too many lo freq table entries\n"); @@ -856,7 +853,7 @@ static int transition_frequency(struct powernow_k8_data *data, unsigned int inde dprintk("cpu %d transition to index %u\n", smp_processor_id(), index); /* fid are the lower 8 bits of the index we stored into - * the cpufreq frequency table in find_psb_table, vid are + * the cpufreq frequency table in find_psb_table, vid are * the upper 8 bits. */ @@ -1050,7 +1047,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) pol->governor = CPUFREQ_DEFAULT_GOVERNOR; pol->cpus = cpu_core_map[pol->cpu]; - /* Take a crude guess here. + /* Take a crude guess here. * That guess was in microseconds, so multiply with 1000 */ pol->cpuinfo.transition_latency = (((data->rvo + 8) * data->vstable * VST_UNITS_20US) + (3 * (1 << data->irt) * 10)) * 1000; diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h index d0de37d58e9..00ea899c17e 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h @@ -63,7 +63,7 @@ struct powernow_k8_data { #define MSR_C_LO_VID_SHIFT 8 /* Field definitions within the FID VID High Control MSR : */ -#define MSR_C_HI_STP_GNT_TO 0x000fffff +#define MSR_C_HI_STP_GNT_TO 0x000fffff /* Field definitions within the FID VID Low Status MSR : */ #define MSR_S_LO_CHANGE_PENDING 0x80000000 /* cleared when completed */ @@ -123,7 +123,7 @@ struct powernow_k8_data { * Most values of interest are enocoded in a single field of the _PSS * entries: the "control" value. */ - + #define IRT_SHIFT 30 #define RVO_SHIFT 28 #define EXT_TYPE_SHIFT 27 @@ -185,7 +185,7 @@ static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned #ifndef for_each_cpu_mask #define for_each_cpu_mask(i,mask) for (i=0;i<1;i++) #endif - + #ifdef CONFIG_SMP static inline void define_siblings(int cpu, cpumask_t cpu_sharedcore_mask[]) { diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c index 7c47005a180..4f46cac155c 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c @@ -9,7 +9,7 @@ */ #include -#include +#include #include #include #include @@ -36,8 +36,8 @@ static unsigned int pentium3_get_frequency (unsigned int processor) /* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */ struct { unsigned int ratio; /* Frequency Multiplier (x10) */ - u8 bitmap; /* power on configuration bits - [27, 25:22] (in MSR 0x2a) */ + u8 bitmap; /* power on configuration bits + [27, 25:22] (in MSR 0x2a) */ } msr_decode_mult [] = { { 30, 0x01 }, { 35, 0x05 }, @@ -58,9 +58,9 @@ static unsigned int pentium3_get_frequency (unsigned int processor) /* PIII(-M) FSB settings: see table b1-b of 24547206.pdf */ struct { - unsigned int value; /* Front Side Bus speed in MHz */ - u8 bitmap; /* power on configuration bits [18: 19] - (in MSR 0x2a) */ + unsigned int value; /* Front Side Bus speed in MHz */ + u8 bitmap; /* power on configuration bits [18: 19] + (in MSR 0x2a) */ } msr_decode_fsb [] = { { 66, 0x0 }, { 100, 0x2 }, @@ -68,8 +68,8 @@ static unsigned int pentium3_get_frequency (unsigned int processor) { 0, 0xff} }; - u32 msr_lo, msr_tmp; - int i = 0, j = 0; + u32 msr_lo, msr_tmp; + int i = 0, j = 0; /* read MSR 0x2a - we only need the low 32 bits */ rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp); @@ -106,7 +106,7 @@ static unsigned int pentium3_get_frequency (unsigned int processor) static unsigned int pentiumM_get_frequency(void) { - u32 msr_lo, msr_tmp; + u32 msr_lo, msr_tmp; rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp); dprintk("PM - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp); @@ -134,7 +134,7 @@ static unsigned int pentium4_get_frequency(void) dprintk("P4 - MSR_EBC_FREQUENCY_ID: 0x%x 0x%x\n", msr_lo, msr_hi); - /* decode the FSB: see IA-32 Intel (C) Architecture Software + /* decode the FSB: see IA-32 Intel (C) Architecture Software * Developer's Manual, Volume 3: System Prgramming Guide, * revision #12 in Table B-1: MSRs in the Pentium 4 and * Intel Xeon Processors, on page B-4 and B-5. @@ -170,7 +170,7 @@ static unsigned int pentium4_get_frequency(void) return (fsb * mult); } - + unsigned int speedstep_get_processor_frequency(unsigned int processor) { switch (processor) { @@ -198,11 +198,11 @@ EXPORT_SYMBOL_GPL(speedstep_get_processor_frequency); unsigned int speedstep_detect_processor (void) { struct cpuinfo_x86 *c = cpu_data; - u32 ebx, msr_lo, msr_hi; + u32 ebx, msr_lo, msr_hi; dprintk("x86: %x, model: %x\n", c->x86, c->x86_model); - if ((c->x86_vendor != X86_VENDOR_INTEL) || + if ((c->x86_vendor != X86_VENDOR_INTEL) || ((c->x86 != 6) && (c->x86 != 0xF))) return 0; @@ -218,15 +218,15 @@ unsigned int speedstep_detect_processor (void) dprintk("ebx value is %x, x86_mask is %x\n", ebx, c->x86_mask); switch (c->x86_mask) { - case 4: + case 4: /* - * B-stepping [M-P4-M] + * B-stepping [M-P4-M] * sample has ebx = 0x0f, production has 0x0e. */ if ((ebx == 0x0e) || (ebx == 0x0f)) return SPEEDSTEP_PROCESSOR_P4M; break; - case 7: + case 7: /* * C-stepping [M-P4-M] * needs to have ebx=0x0e, else it's a celeron: @@ -253,7 +253,7 @@ unsigned int speedstep_detect_processor (void) * also, M-P4M HTs have ebx=0x8, too * For now, they are distinguished by the model_id string */ - if ((ebx == 0x0e) || (strstr(c->x86_model_id,"Mobile Intel(R) Pentium(R) 4") != NULL)) + if ((ebx == 0x0e) || (strstr(c->x86_model_id,"Mobile Intel(R) Pentium(R) 4") != NULL)) return SPEEDSTEP_PROCESSOR_P4M; break; default: @@ -264,8 +264,7 @@ unsigned int speedstep_detect_processor (void) switch (c->x86_model) { case 0x0B: /* Intel PIII [Tualatin] */ - /* cpuid_ebx(1) is 0x04 for desktop PIII, - 0x06 for mobile PIII-M */ + /* cpuid_ebx(1) is 0x04 for desktop PIII, 0x06 for mobile PIII-M */ ebx = cpuid_ebx(0x00000001); dprintk("ebx is %x\n", ebx); @@ -275,9 +274,8 @@ unsigned int speedstep_detect_processor (void) return 0; /* So far all PIII-M processors support SpeedStep. See - * Intel's 24540640.pdf of June 2003 + * Intel's 24540640.pdf of June 2003 */ - return SPEEDSTEP_PROCESSOR_PIII_T; case 0x08: /* Intel PIII [Coppermine] */ @@ -399,7 +397,7 @@ unsigned int speedstep_get_freqs(unsigned int processor, } } - out: +out: local_irq_restore(flags); return (ret); } diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.h b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.h index 6a727fd3a77..b735429c50b 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.h +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.h @@ -14,7 +14,7 @@ #define SPEEDSTEP_PROCESSOR_PIII_C_EARLY 0x00000001 /* Coppermine core */ #define SPEEDSTEP_PROCESSOR_PIII_C 0x00000002 /* Coppermine core */ -#define SPEEDSTEP_PROCESSOR_PIII_T 0x00000003 /* Tualatin core */ +#define SPEEDSTEP_PROCESSOR_PIII_T 0x00000003 /* Tualatin core */ #define SPEEDSTEP_PROCESSOR_P4M 0x00000004 /* P4-M */ /* the following processors are not speedstep-capable and are not auto-detected @@ -25,8 +25,8 @@ /* speedstep states -- only two of them */ -#define SPEEDSTEP_HIGH 0x00000000 -#define SPEEDSTEP_LOW 0x00000001 +#define SPEEDSTEP_HIGH 0x00000000 +#define SPEEDSTEP_LOW 0x00000001 /* detect a speedstep-capable processor */ @@ -36,13 +36,13 @@ extern unsigned int speedstep_detect_processor (void); extern unsigned int speedstep_get_processor_frequency(unsigned int processor); -/* detect the low and high speeds of the processor. The callback - * set_state"'s first argument is either SPEEDSTEP_HIGH or - * SPEEDSTEP_LOW; the second argument is zero so that no +/* detect the low and high speeds of the processor. The callback + * set_state"'s first argument is either SPEEDSTEP_HIGH or + * SPEEDSTEP_LOW; the second argument is zero so that no * cpufreq_notify_transition calls are initiated. */ extern unsigned int speedstep_get_freqs(unsigned int processor, - unsigned int *low_speed, - unsigned int *high_speed, - unsigned int *transition_latency, - void (*set_state) (unsigned int state)); + unsigned int *low_speed, + unsigned int *high_speed, + unsigned int *transition_latency, + void (*set_state) (unsigned int state)); diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c index 28cc5d524af..336ba49e526 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c @@ -13,8 +13,8 @@ *********************************************************************/ #include -#include -#include +#include +#include #include #include #include @@ -28,21 +28,21 @@ * * These parameters are got from IST-SMI BIOS call. * If user gives it, these are used. - * + * */ -static int smi_port = 0; -static int smi_cmd = 0; -static unsigned int smi_sig = 0; +static int smi_port = 0; +static int smi_cmd = 0; +static unsigned int smi_sig = 0; /* info about the processor */ -static unsigned int speedstep_processor = 0; +static unsigned int speedstep_processor = 0; -/* - * There are only two frequency states for each processor. Values +/* + * There are only two frequency states for each processor. Values * are in kHz for the time being. */ static struct cpufreq_frequency_table speedstep_freqs[] = { - {SPEEDSTEP_HIGH, 0}, + {SPEEDSTEP_HIGH, 0}, {SPEEDSTEP_LOW, 0}, {0, CPUFREQ_TABLE_END}, }; @@ -123,7 +123,7 @@ static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high) *low = low_mhz * 1000; return result; -} +} /** * speedstep_get_state - set the SpeedStep state @@ -204,7 +204,7 @@ static void speedstep_set_state (unsigned int state) * speedstep_target - set a new CPUFreq policy * @policy: new policy * @target_freq: new freq - * @relation: + * @relation: * * Sets a new CPUFreq policy/freq. */ @@ -283,7 +283,7 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy) state = speedstep_get_state(); speed = speedstep_freqs[state].frequency; - dprintk("currently at %s speed setting - %i MHz\n", + dprintk("currently at %s speed setting - %i MHz\n", (speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) ? "low" : "high", (speed / 1000)); @@ -296,7 +296,7 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy) if (result) return (result); - cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu); + cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu); return 0; } @@ -332,8 +332,8 @@ static struct freq_attr* speedstep_attr[] = { static struct cpufreq_driver speedstep_driver = { .name = "speedstep-smi", - .verify = speedstep_verify, - .target = speedstep_target, + .verify = speedstep_verify, + .target = speedstep_target, .init = speedstep_cpu_init, .exit = speedstep_cpu_exit, .get = speedstep_get, @@ -370,13 +370,12 @@ static int __init speedstep_init(void) return -ENODEV; } - dprintk("signature:0x%.8lx, command:0x%.8lx, event:0x%.8lx, perf_level:0x%.8lx.\n", + dprintk("signature:0x%.8lx, command:0x%.8lx, event:0x%.8lx, perf_level:0x%.8lx.\n", ist_info.signature, ist_info.command, ist_info.event, ist_info.perf_level); - - /* Error if no IST-SMI BIOS or no PARM + /* Error if no IST-SMI BIOS or no PARM sig= 'ISGE' aka 'Intel Speedstep Gate E' */ - if ((ist_info.signature != 0x47534943) && ( + if ((ist_info.signature != 0x47534943) && ( (smi_port == 0) || (smi_cmd == 0))) return -ENODEV; @@ -386,17 +385,15 @@ static int __init speedstep_init(void) smi_sig = ist_info.signature; /* setup smi_port from MODLULE_PARM or BIOS */ - if ((smi_port > 0xff) || (smi_port < 0)) { + if ((smi_port > 0xff) || (smi_port < 0)) return -EINVAL; - } else if (smi_port == 0) { + else if (smi_port == 0) smi_port = ist_info.command & 0xff; - } - if ((smi_cmd > 0xff) || (smi_cmd < 0)) { + if ((smi_cmd > 0xff) || (smi_cmd < 0)) return -EINVAL; - } else if (smi_cmd == 0) { + else if (smi_cmd == 0) smi_cmd = (ist_info.command >> 16) & 0xff; - } return cpufreq_register_driver(&speedstep_driver); } -- cgit v1.2.3-18-g5258 From 2a1c1c877ecb446dbdf1715248e151db8719a87b Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Sun, 5 Mar 2006 03:35:00 -0500 Subject: [CPUFREQ] powernow-k8: Let cpufreq driver handle affected CPUs powernow-k8: Let cpufreq driver handle affected CPUs Let the cpufreq driver manage AMD Dual-Core CPUs being tied together. Since cpufreq driver's affected CPUs data, cpufreq_policy->cpus, already knows about which cores are tied together, powernow driver does not have keep its internal data for every core. (even a pointer.. it will never be called on) Telling cpufreq driver about cpu_core_map at init time is sufficient. Signed-off-by: Jacob Shin Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/powernow-k8.c | 15 +++------------ 1 file changed, 3 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c index e85e90524df..9a8ec03cde9 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c @@ -45,7 +45,7 @@ #define PFX "powernow-k8: " #define BFX PFX "BIOS error: " -#define VERSION "version 1.60.0" +#define VERSION "version 1.60.1" #include "powernow-k8.h" /* serialize freq changes */ @@ -908,7 +908,6 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi u32 checkvid = data->currvid; unsigned int newstate; int ret = -EIO; - int i; /* only run on specific CPU from here on */ oldmask = current->cpus_allowed; @@ -954,12 +953,6 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi up(&fidvid_sem); goto err_out; } - - /* Update all the fid/vids of our siblings */ - for_each_cpu_mask(i, cpu_core_map[pol->cpu]) { - powernow_data[i]->currvid = data->currvid; - powernow_data[i]->currfid = data->currfid; - } up(&fidvid_sem); pol->cur = find_khz_freq_from_fid(data->currfid); @@ -983,7 +976,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) { struct powernow_k8_data *data; cpumask_t oldmask = CPU_MASK_ALL; - int rc, i; + int rc; if (!cpu_online(pol->cpu)) return -ENODEV; @@ -1069,9 +1062,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) printk("cpu_init done, current fid 0x%x, vid 0x%x\n", data->currfid, data->currvid); - for_each_cpu_mask(i, cpu_core_map[pol->cpu]) { - powernow_data[i] = data; - } + powernow_data[pol->cpu] = data; return 0; -- cgit v1.2.3-18-g5258 From 4f1933620f57145212cdbb1ac6ce099eeeb21c5a Mon Sep 17 00:00:00 2001 From: Paul Smith Date: Sun, 5 Mar 2006 17:14:10 -0500 Subject: kbuild: change kbuild to not rely on incorrect GNU make behavior The kbuild system takes advantage of an incorrect behavior in GNU make. Once this behavior is fixed, all files in the kernel rebuild every time, even if nothing has changed. This patch ensures kbuild works with both the incorrect and correct behaviors of GNU make. For more details on the incorrect behavior, see: http://lists.gnu.org/archive/html/bug-make/2006-03/msg00003.html Changes in this patch: - Keep all targets that are to be marked .PHONY in a variable, PHONY. - Add .PHONY: $(PHONY) to mark them properly. - Remove any $(PHONY) files from the $? list when determining whether targets are up-to-date or not. Signed-off-by: Paul Smith Signed-off-by: Sam Ravnborg --- arch/arm/Makefile | 5 ++++- arch/arm/boot/Makefile | 5 ++++- arch/arm/boot/bootp/Makefile | 5 ++++- arch/arm26/Makefile | 7 +++++-- arch/arm26/boot/Makefile | 5 ++++- arch/i386/Makefile | 4 ++-- arch/ia64/Makefile | 5 ++++- arch/m32r/Makefile | 5 ++++- arch/powerpc/Makefile | 2 +- arch/ppc/Makefile | 2 +- arch/ppc/boot/Makefile | 5 ++++- arch/ppc/boot/openfirmware/Makefile | 7 +++++-- arch/sh/Makefile | 2 +- arch/um/Makefile | 7 +++++-- arch/x86_64/Makefile | 4 ++-- 15 files changed, 50 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/arm/Makefile b/arch/arm/Makefile index fbfc14a56b9..585d334234f 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -1,6 +1,9 @@ # # arch/arm/Makefile # +# This file is included by the global makefile so that you can add your own +# architecture-specific flags and dependencies. +# # This file is subject to the terms and conditions of the GNU General Public # License. See the file "COPYING" in the main directory of this archive # for more details. @@ -176,7 +179,7 @@ endif archprepare: maketools -.PHONY: maketools FORCE +PHONY += maketools FORCE maketools: include/linux/version.h include/asm-arm/.arch FORCE $(Q)$(MAKE) $(build)=arch/arm/tools include/asm-arm/mach-types.h diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index a174d63395e..ec9c400c7f8 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -1,6 +1,9 @@ # # arch/arm/boot/Makefile # +# This file is included by the global makefile so that you can add your own +# architecture-specific flags and dependencies. +# # This file is subject to the terms and conditions of the GNU General Public # License. See the file "COPYING" in the main directory of this archive # for more details. @@ -73,7 +76,7 @@ $(obj)/bootpImage: $(obj)/bootp/bootp FORCE $(call if_changed,objcopy) @echo ' Kernel: $@ is ready' -.PHONY: initrd FORCE +PHONY += initrd FORCE initrd: @test "$(INITRD_PHYS)" != "" || \ (echo This machine does not support INITRD; exit -1) diff --git a/arch/arm/boot/bootp/Makefile b/arch/arm/boot/bootp/Makefile index 8e8879b6b3d..c394e305447 100644 --- a/arch/arm/boot/bootp/Makefile +++ b/arch/arm/boot/bootp/Makefile @@ -1,6 +1,9 @@ # # linux/arch/arm/boot/bootp/Makefile # +# This file is included by the global makefile so that you can add your own +# architecture-specific flags and dependencies. +# LDFLAGS_bootp :=-p --no-undefined -X \ --defsym initrd_phys=$(INITRD_PHYS) \ @@ -21,4 +24,4 @@ $(obj)/kernel.o: arch/arm/boot/zImage FORCE $(obj)/initrd.o: $(INITRD) FORCE -.PHONY: $(INITRD) FORCE +PHONY += $(INITRD) FORCE diff --git a/arch/arm26/Makefile b/arch/arm26/Makefile index 844a9e46886..fe91eda98a9 100644 --- a/arch/arm26/Makefile +++ b/arch/arm26/Makefile @@ -1,6 +1,9 @@ # # arch/arm26/Makefile # +# This file is included by the global makefile so that you can add your own +# architecture-specific flags and dependencies. +# # This file is subject to the terms and conditions of the GNU General Public # License. See the file "COPYING" in the main directory of this archive # for more details. @@ -49,9 +52,9 @@ all: zImage boot := arch/arm26/boot -.PHONY: maketools FORCE +PHONY += maketools FORCE maketools: FORCE - + # Convert bzImage to zImage bzImage: vmlinux diff --git a/arch/arm26/boot/Makefile b/arch/arm26/boot/Makefile index b5c2277654d..68acb7b0d47 100644 --- a/arch/arm26/boot/Makefile +++ b/arch/arm26/boot/Makefile @@ -1,6 +1,9 @@ # # arch/arm26/boot/Makefile # +# This file is included by the global makefile so that you can add your own +# architecture-specific flags and dependencies. +# # This file is subject to the terms and conditions of the GNU General Public # License. See the file "COPYING" in the main directory of this archive # for more details. @@ -60,7 +63,7 @@ $(obj)/xipImage: vmlinux FORCE @echo ' Kernel: $@ is ready' endif -.PHONY: initrd +PHONY += initrd initrd: @test "$(INITRD_PHYS)" != "" || \ (echo This machine does not support INITRD; exit -1) diff --git a/arch/i386/Makefile b/arch/i386/Makefile index 36bef6543ac..ff6973a85c8 100644 --- a/arch/i386/Makefile +++ b/arch/i386/Makefile @@ -99,8 +99,8 @@ AFLAGS += $(mflags-y) boot := arch/i386/boot -.PHONY: zImage bzImage compressed zlilo bzlilo \ - zdisk bzdisk fdimage fdimage144 fdimage288 install +PHONY += zImage bzImage compressed zlilo bzlilo \ + zdisk bzdisk fdimage fdimage144 fdimage288 install all: bzImage diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile index f722e1a2594..80ea7506fa1 100644 --- a/arch/ia64/Makefile +++ b/arch/ia64/Makefile @@ -1,6 +1,9 @@ # # ia64/Makefile # +# This file is included by the global makefile so that you can add your own +# architecture-specific flags and dependencies. +# # This file is subject to the terms and conditions of the GNU General Public # License. See the file "COPYING" in the main directory of this archive # for more details. @@ -62,7 +65,7 @@ drivers-$(CONFIG_OPROFILE) += arch/ia64/oprofile/ boot := arch/ia64/hp/sim/boot -.PHONY: boot compressed check +PHONY += boot compressed check all: compressed unwcheck diff --git a/arch/m32r/Makefile b/arch/m32r/Makefile index 983d438b14b..229f66fc8e5 100644 --- a/arch/m32r/Makefile +++ b/arch/m32r/Makefile @@ -1,6 +1,9 @@ # # m32r/Makefile # +# This file is included by the global makefile so that you can add your own +# architecture-specific flags and dependencies. +# LDFLAGS := OBJCOPYFLAGS := -O binary -R .note -R .comment -S @@ -39,7 +42,7 @@ drivers-$(CONFIG_OPROFILE) += arch/m32r/oprofile/ boot := arch/m32r/boot -.PHONY: zImage +PHONY += zImage all: zImage diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 5500ab55d04..5787d55a20b 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -150,7 +150,7 @@ CPPFLAGS_vmlinux.lds := -Upowerpc BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm uImage -.PHONY: $(BOOT_TARGETS) +PHONY += $(BOOT_TARGETS) boot := arch/$(ARCH)/boot diff --git a/arch/ppc/Makefile b/arch/ppc/Makefile index 98e940beeb3..9fbdf54ba2b 100644 --- a/arch/ppc/Makefile +++ b/arch/ppc/Makefile @@ -82,7 +82,7 @@ drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/ BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm -.PHONY: $(BOOT_TARGETS) +PHONY += $(BOOT_TARGETS) all: uImage zImage diff --git a/arch/ppc/boot/Makefile b/arch/ppc/boot/Makefile index efd8ce515d5..84eec0bef93 100644 --- a/arch/ppc/boot/Makefile +++ b/arch/ppc/boot/Makefile @@ -1,6 +1,9 @@ # # arch/ppc/boot/Makefile # +# This file is included by the global makefile so that you can add your own +# architecture-specific flags and dependencies. +# # This file is subject to the terms and conditions of the GNU General Public # License. See the file "COPYING" in the main directory of this archive # for more details. @@ -25,7 +28,7 @@ subdir- += simple openfirmware hostprogs-y := $(addprefix utils/, addnote mknote hack-coff mkprep mkbugboot mktree) -.PHONY: $(BOOT_TARGETS) $(bootdir-y) +PHONY += $(BOOT_TARGETS) $(bootdir-y) $(BOOT_TARGETS): $(bootdir-y) diff --git a/arch/ppc/boot/openfirmware/Makefile b/arch/ppc/boot/openfirmware/Makefile index 2a411ec2e65..66b73974375 100644 --- a/arch/ppc/boot/openfirmware/Makefile +++ b/arch/ppc/boot/openfirmware/Makefile @@ -1,5 +1,8 @@ # Makefile for making bootable images on various OpenFirmware machines. # +# This file is included by the global makefile so that you can add your own +# architecture-specific flags and dependencies. +# # Paul Mackerras January 1997 # XCOFF bootable images for PowerMacs # Geert Uytterhoeven September 1997 @@ -86,7 +89,7 @@ $(images)/zImage.chrp-rs6k $(images)/zImage.initrd.chrp-rs6k: \ # The targets used on the make command-line -.PHONY: zImage zImage.initrd +PHONY += zImage zImage.initrd zImage: $(images)/zImage.chrp \ $(images)/zImage.chrp-rs6k @echo ' kernel: $@ is ready ($<)' @@ -96,7 +99,7 @@ zImage.initrd: $(images)/zImage.initrd.chrp \ TFTPIMAGE := /tftpboot/zImage -.PHONY: znetboot znetboot.initrd +PHONY += znetboot znetboot.initrd znetboot: $(images)/zImage.chrp cp $(images)/zImage.chrp $(TFTPIMAGE).chrp$(END) @echo ' kernel: $@ is ready ($<)' diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 08c9515c480..c72e17a96ee 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -172,7 +172,7 @@ include/asm-sh/.mach: $(wildcard include/config/sh/*.h) include/config/MARKER archprepare: maketools include/asm-sh/.cpu include/asm-sh/.mach -.PHONY: maketools FORCE +PHONY += maketools FORCE maketools: include/linux/version.h FORCE $(Q)$(MAKE) $(build)=arch/sh/tools include/asm-sh/machtypes.h diff --git a/arch/um/Makefile b/arch/um/Makefile index c58b657f009..8d14c7a831b 100644 --- a/arch/um/Makefile +++ b/arch/um/Makefile @@ -1,4 +1,7 @@ -# +# +# This file is included by the global makefile so that you can add your own +# architecture-specific flags and dependencies. +# # Copyright (C) 2002 Jeff Dike (jdike@karaya.com) # Licensed under the GPL # @@ -88,7 +91,7 @@ CONFIG_KERNEL_HALF_GIGS ?= 0 SIZE = (($(CONFIG_NEST_LEVEL) + $(CONFIG_KERNEL_HALF_GIGS)) * 0x20000000) -.PHONY: linux +PHONY += linux all: linux diff --git a/arch/x86_64/Makefile b/arch/x86_64/Makefile index d7fd46479c5..7405dfd6522 100644 --- a/arch/x86_64/Makefile +++ b/arch/x86_64/Makefile @@ -67,8 +67,8 @@ drivers-$(CONFIG_OPROFILE) += arch/x86_64/oprofile/ boot := arch/x86_64/boot -.PHONY: bzImage bzlilo install archmrproper \ - fdimage fdimage144 fdimage288 archclean +PHONY += bzImage bzlilo install archmrproper \ + fdimage fdimage144 fdimage288 archclean #Default target when executing "make" all: bzImage -- cgit v1.2.3-18-g5258 From 6d373ea012b2974e627b9ee830e75cf3bf3c4c24 Mon Sep 17 00:00:00 2001 From: "Pallipadi, Venkatesh" Date: Thu, 9 Mar 2006 20:07:44 -0800 Subject: [CPUFREQ] Fix the p4-clockmod N60 errata workaround. Fix the code to disable freqs less than 2GHz in N60 errata. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/p4-clockmod.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c b/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c index 0e1fc5c4524..ab6504efd80 100644 --- a/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c +++ b/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c @@ -244,7 +244,7 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy) for (i=1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) { if ((i<2) && (has_N44_O17_errata[policy->cpu])) p4clockmod_table[i].frequency = CPUFREQ_ENTRY_INVALID; - else if (has_N60_errata[policy->cpu] && p4clockmod_table[i].frequency < 2000000) + else if (has_N60_errata[policy->cpu] && ((stock_freq * i)/8) < 2000000) p4clockmod_table[i].frequency = CPUFREQ_ENTRY_INVALID; else p4clockmod_table[i].frequency = (stock_freq * i)/8; -- cgit v1.2.3-18-g5258 From 5e8fb97163c7bf2b370290b4924babc361b05dde Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Sat, 11 Mar 2006 16:03:16 -0500 Subject: [CPUFREQ] Mark longhaul driver as broken. This seems to work for a short period of time, but when used in conjunction with a userspace governor that changes the frequency regularly, it's only a matter of time before everything just locks up. Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/cpufreq/Kconfig b/arch/i386/kernel/cpu/cpufreq/Kconfig index 0f1eb507233..f7016a9e2d3 100644 --- a/arch/i386/kernel/cpu/cpufreq/Kconfig +++ b/arch/i386/kernel/cpu/cpufreq/Kconfig @@ -202,6 +202,7 @@ config X86_LONGRUN config X86_LONGHAUL tristate "VIA Cyrix III Longhaul" select CPU_FREQ_TABLE + depends on BROKEN help This adds the CPUFreq driver for VIA Samuel/CyrixIII, VIA Cyrix Samuel/C3, VIA Cyrix Ezra and VIA Cyrix Ezra-T -- cgit v1.2.3-18-g5258 From 388d6c5180faf83ea06dc2614e8e89910ddef4f0 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Sat, 11 Mar 2006 16:04:53 -0500 Subject: [CPUFREQ] Whitespace cleanup Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/Kconfig | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/cpufreq/Kconfig b/arch/i386/kernel/cpu/cpufreq/Kconfig index f7016a9e2d3..e44a4c6a4fe 100644 --- a/arch/i386/kernel/cpu/cpufreq/Kconfig +++ b/arch/i386/kernel/cpu/cpufreq/Kconfig @@ -114,9 +114,9 @@ config X86_SPEEDSTEP_CENTRINO you also need to say Y to "Use ACPI tables to decode..." below [which might imply enabling ACPI] if you want to use this driver on non-Banias CPUs. - + For details, take a look at . - + If in doubt, say N. config X86_SPEEDSTEP_CENTRINO_ACPI @@ -147,7 +147,7 @@ config X86_SPEEDSTEP_ICH help This adds the CPUFreq driver for certain mobile Intel Pentium III (Coppermine), all mobile Intel Pentium III-M (Tualatin) and all - mobile Intel Pentium 4 P4-M on systems which have an Intel ICH2, + mobile Intel Pentium 4 P4-M on systems which have an Intel ICH2, ICH3 or ICH4 southbridge. For details, take a look at . @@ -160,7 +160,7 @@ config X86_SPEEDSTEP_SMI depends on EXPERIMENTAL help This adds the CPUFreq driver for certain mobile Intel Pentium III - (Coppermine), all mobile Intel Pentium III-M (Tualatin) + (Coppermine), all mobile Intel Pentium III-M (Tualatin) on systems which have an Intel 440BX/ZX/MX southbridge. For details, take a look at . @@ -204,8 +204,8 @@ config X86_LONGHAUL select CPU_FREQ_TABLE depends on BROKEN help - This adds the CPUFreq driver for VIA Samuel/CyrixIII, - VIA Cyrix Samuel/C3, VIA Cyrix Ezra and VIA Cyrix Ezra-T + This adds the CPUFreq driver for VIA Samuel/CyrixIII, + VIA Cyrix Samuel/C3, VIA Cyrix Ezra and VIA Cyrix Ezra-T processors. For details, take a look at . @@ -215,11 +215,11 @@ config X86_LONGHAUL comment "shared options" config X86_ACPI_CPUFREQ_PROC_INTF - bool "/proc/acpi/processor/../performance interface (deprecated)" + bool "/proc/acpi/processor/../performance interface (deprecated)" depends on PROC_FS depends on X86_ACPI_CPUFREQ || X86_SPEEDSTEP_CENTRINO_ACPI || X86_POWERNOW_K7_ACPI || X86_POWERNOW_K8_ACPI help - This enables the deprecated /proc/acpi/processor/../performance + This enables the deprecated /proc/acpi/processor/../performance interface. While it is helpful for debugging, the generic, cross-architecture cpufreq interfaces should be used. @@ -233,9 +233,9 @@ config X86_SPEEDSTEP_RELAXED_CAP_CHECK bool "Relaxed speedstep capability checks" depends on (X86_SPEEDSTEP_SMI || X86_SPEEDSTEP_ICH) help - Don't perform all checks for a speedstep capable system which would - normally be done. Some ancient or strange systems, though speedstep - capable, don't always indicate that they are speedstep capable. This + Don't perform all checks for a speedstep capable system which would + normally be done. Some ancient or strange systems, though speedstep + capable, don't always indicate that they are speedstep capable. This option lets the probing code bypass some of those checks if the parameter "relaxed_check=1" is passed to the module. -- cgit v1.2.3-18-g5258 From 84f0b1ef8c013b33dea9bbc2521094dd29110cf0 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Sat, 11 Mar 2006 16:13:56 -0500 Subject: [CPUFREQ] kzalloc conversion for gx-suspmod Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/gx-suspmod.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c b/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c index 65b8fa2b0ee..92afa3bc84f 100644 --- a/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c +++ b/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c @@ -459,10 +459,9 @@ static int __init cpufreq_gx_init(void) dprintk("geode suspend modulation available.\n"); - params = kmalloc(sizeof(struct gxfreq_params), GFP_KERNEL); + params = kzalloc(sizeof(struct gxfreq_params), GFP_KERNEL); if (params == NULL) return -ENOMEM; - memset(params, 0, sizeof(struct gxfreq_params)); params->cs55x0 = gx_pci; gx_params = params; -- cgit v1.2.3-18-g5258 From 82dfdcae0d57c842e02f037758687eef42fb7af6 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Tue, 14 Mar 2006 11:35:37 +1100 Subject: powerpc: Disallow lparcfg being a module The lparcfg code needs several things which are pretty arcane internal details and which we don't want to export, which means that lparcfg doesn't work when built as a module. This makes it a bool instead of a tristate in the Kconfig so that users can't try to build it as a module. Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index 4e5c8f8d869..a57032cf6f1 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -19,7 +19,7 @@ config SCANLOG depends on RTAS_PROC && PPC_PSERIES config LPARCFG - tristate "LPAR Configuration Data" + bool "LPAR Configuration Data" depends on PPC_PSERIES || PPC_ISERIES help Provide system capacity information via human readable -- cgit v1.2.3-18-g5258 From cbf0ec6ee001ab89471397ac84105b2e3b2fd986 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 14 Mar 2006 08:01:47 -0800 Subject: Revert "[PATCH] x86-64: Fix up handling of non canonical user RIPs" This reverts commit c33d4568aca9028a22857f94f5e0850012b6444b. Andrew Clayton and Hugh Dickins report that it's broken for them and causes strange page table and slab corruption, and spontaneous reboots. Let's get it right next time. Cc: Andrew Clayton Cc: Hugh Dickins Cc: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/entry.S | 29 ++++++++++++++++++----------- 1 file changed, 18 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/entry.S b/arch/x86_64/kernel/entry.S index 22cb6ee074b..7c10e9009d6 100644 --- a/arch/x86_64/kernel/entry.S +++ b/arch/x86_64/kernel/entry.S @@ -178,12 +178,6 @@ rff_trace: * Interrupts are off on entry. * Only called from user space. * - * EM64T CPUs have somewhat weird error reporting for non canonical RIPs in SYSRET. - * We can't handle any exceptions there because the exception handler would - * end up running on the user stack which is unsafe. To avoid problems - * any code that might end up with a user touched pt_regs should return - * using int_ret_from_syscall. - * * XXX if we had a free scratch register we could save the RSP into the stack frame * and report it properly in ps. Unfortunately we haven't. */ @@ -260,9 +254,7 @@ sysret_signal: xorl %esi,%esi # oldset -> arg2 call ptregscall_common 1: movl $_TIF_NEED_RESCHED,%edi - /* Stack frame might have been changed. The IRET path does - some additional checks to handle this */ - jmp int_with_check + jmp sysret_check badsys: movq $-ENOSYS,RAX-ARGOFFSET(%rsp) @@ -288,8 +280,7 @@ tracesys: call syscall_trace_leave RESTORE_TOP_OF_STACK %rbx RESTORE_REST - /* Stack frame might have been changed. Use the more careful IRET path */ - jmp int_ret_from_sys_call + jmp ret_from_sys_call CFI_ENDPROC /* @@ -417,9 +408,25 @@ ENTRY(stub_execve) CFI_ADJUST_CFA_OFFSET -8 CFI_REGISTER rip, r11 SAVE_REST + movq %r11, %r15 + CFI_REGISTER rip, r15 FIXUP_TOP_OF_STACK %r11 call sys_execve + GET_THREAD_INFO(%rcx) + bt $TIF_IA32,threadinfo_flags(%rcx) + CFI_REMEMBER_STATE + jc exec_32bit RESTORE_TOP_OF_STACK %r11 + movq %r15, %r11 + CFI_REGISTER rip, r11 + RESTORE_REST + pushq %r11 + CFI_ADJUST_CFA_OFFSET 8 + CFI_REL_OFFSET rip, 0 + ret + +exec_32bit: + CFI_RESTORE_STATE movq %rax,RAX(%rsp) RESTORE_REST jmp int_ret_from_sys_call -- cgit v1.2.3-18-g5258 From 67963132638e67ad3c5aa16765e6f3f2f3cdd85c Mon Sep 17 00:00:00 2001 From: Maneesh Soni Date: Tue, 14 Mar 2006 15:03:14 +0530 Subject: [PATCH] Plug kdump shutdown race window lapic_shutdown() re-enables interrupts which is un-desirable for panic case, so use local_irq_save() and local_irq_restore() to keep the irqs disabled for kexec on panic case, and close a possible race window while kdump shutdown as shown in this stack trace -- BUG: spinlock lockup on CPU#1, bash/4396, c52781a0 [] _raw_spin_lock+0xb7/0xd2 [] _spin_lock+0x6/0x8 [] scheduler_tick+0xe7/0x328 [] update_process_times+0x51/0x5d [] smp_apic_timer_interrupt+0x4f/0x58 [] lapic_shutdown+0x76/0x7e [] apic_timer_interrupt+0x1c/0x30 [] lapic_shutdown+0x76/0x7e [] machine_crash_shutdown+0x83/0xaa [] crash_kexec+0xc1/0xe3 [] _spin_lock+0x6/0x8 [] crash_kexec+0xad/0xe3 [] __handle_sysrq+0x84/0xfd [] write_sysrq_trigger+0x2c/0x35 [] vfs_write+0xa2/0x13b [] sys_write+0x3b/0x64 [] syscall_call+0x7/0xb Signed-off-by: Maneesh Soni Signed-off-by: Linus Torvalds --- arch/i386/kernel/apic.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c index f39e09ef64e..776c90989e0 100644 --- a/arch/i386/kernel/apic.c +++ b/arch/i386/kernel/apic.c @@ -570,16 +570,18 @@ void __devinit setup_local_APIC(void) */ void lapic_shutdown(void) { + unsigned long flags; + if (!cpu_has_apic) return; - local_irq_disable(); + local_irq_save(flags); clear_local_APIC(); if (enabled_via_apicbase) disable_local_APIC(); - local_irq_enable(); + local_irq_restore(flags); } #ifdef CONFIG_PM -- cgit v1.2.3-18-g5258 From 17320a9644a45ccac51ce4ff4333276844abf72d Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 15 Mar 2006 14:57:13 +0000 Subject: [ARM] Fix "thead" typo Signed-off-by: Russell King --- arch/arm/kernel/ptrace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index bc9e2f8ae32..a1d1b2906e8 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -628,7 +628,7 @@ static int ptrace_setwmmxregs(struct task_struct *tsk, void __user *ufp) if (!test_ti_thread_flag(thread, TIF_USING_IWMMXT)) return -EACCES; iwmmxt_task_release(thread); /* force a reload */ - return copy_from_user(&thead->fpstate.iwmmxt, ufp, IWMMXT_SIZE) + return copy_from_user(&thread->fpstate.iwmmxt, ufp, IWMMXT_SIZE) ? -EFAULT : 0; } -- cgit v1.2.3-18-g5258 From 4ebf2d00260bac5213c5dfb8d257e15e40503725 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 15 Mar 2006 16:03:03 +0000 Subject: [ARM] 3357/1: enable frontlight on collie Patch from Pavel Machek Enable frontlight during collie bootup, so that display is actually readable in anything other than bright sunlight. Signed-off-by: Pavel Machek Signed-off-by: Richard Purdie Signed-off-by: Russell King --- arch/arm/common/locomo.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'arch') diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index 159ad7ed7a4..d31b1cb7eea 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -629,6 +629,22 @@ static int locomo_resume(struct platform_device *dev) } #endif + +#define LCM_ALC_EN 0x8000 + +void frontlight_set(struct locomo *lchip, int duty, int vr, int bpwf) +{ + unsigned long flags; + + spin_lock_irqsave(&lchip->lock, flags); + locomo_writel(bpwf, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS); + udelay(100); + locomo_writel(duty, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALD); + locomo_writel(bpwf | LCM_ALC_EN, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS); + spin_unlock_irqrestore(&lchip->lock, flags); +} + + /** * locomo_probe - probe for a single LoCoMo chip. * @phys_addr: physical address of device. @@ -688,6 +704,11 @@ __locomo_probe(struct device *me, struct resource *mem, int irq) /* FrontLight */ locomo_writel(0, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS); locomo_writel(0, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALD); + + /* Same constants can be used for collie and poodle + (depending on CONFIG options in original sharp code)? */ + frontlight_set(lchip, 163, 0, 148); + /* Longtime timer */ locomo_writel(0, lchip->base + LOCOMO_LTINT); /* SPI */ -- cgit v1.2.3-18-g5258 From 66be0c30282bef9ef5ab1f89028834ea00f4b4ae Mon Sep 17 00:00:00 2001 From: Albrecht Dreß Date: Wed, 15 Mar 2006 16:03:05 +0000 Subject: [ARM] 3358/1: [S3C2410] add missing SPI DMA resources MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Patch from Albrecht Dreß Add DMA resources to s3c2410 spi platform devices - dma_(alloc|free)_coherent should now work as expected. Signed-off-by: Albrecht Dreß Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/devs.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-s3c2410/devs.c b/arch/arm/mach-s3c2410/devs.c index 0a47d38789a..ca09ba516e4 100644 --- a/arch/arm/mach-s3c2410/devs.c +++ b/arch/arm/mach-s3c2410/devs.c @@ -334,11 +334,17 @@ static struct resource s3c_spi0_resource[] = { }; +static u64 s3c_device_spi0_dmamask = 0xffffffffUL; + struct platform_device s3c_device_spi0 = { .name = "s3c2410-spi", .id = 0, .num_resources = ARRAY_SIZE(s3c_spi0_resource), .resource = s3c_spi0_resource, + .dev = { + .dma_mask = &s3c_device_spi0_dmamask, + .coherent_dma_mask = 0xffffffffUL + } }; EXPORT_SYMBOL(s3c_device_spi0); @@ -359,11 +365,17 @@ static struct resource s3c_spi1_resource[] = { }; +static u64 s3c_device_spi1_dmamask = 0xffffffffUL; + struct platform_device s3c_device_spi1 = { .name = "s3c2410-spi", .id = 1, .num_resources = ARRAY_SIZE(s3c_spi1_resource), .resource = s3c_spi1_resource, + .dev = { + .dma_mask = &s3c_device_spi1_dmamask, + .coherent_dma_mask = 0xffffffffUL + } }; EXPORT_SYMBOL(s3c_device_spi1); -- cgit v1.2.3-18-g5258 From 84dff1a73013dbdd7d770c332ab84cbfed24741b Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 15 Mar 2006 23:17:23 +0000 Subject: [ARM] 3363/1: [cleanup] process.c - fix warnings Patch from Ben Dooks Fix the following warnings from sparse: arch/arm/kernel/process.c:86:6: warning: symbol 'default_idle' was not declared. Should it be static? arch/arm/kernel/process.c:378:5: warning: symbol 'dump_fpu' was not declared. Should it be static? Include for dump_fpu() decleration, and make default_idle() static as it is not used outside the file. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/kernel/process.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 4b4e4cf79c8..489c069e5c3 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include @@ -83,7 +84,7 @@ EXPORT_SYMBOL(pm_power_off); * This is our default idle handler. We need to disable * interrupts here to ensure we don't miss a wakeup call. */ -void default_idle(void) +static void default_idle(void) { if (hlt_counter) cpu_relax(); -- cgit v1.2.3-18-g5258 From 0fc1c832123493aca4c6a8600179132651f48bdc Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 15 Mar 2006 23:17:30 +0000 Subject: [ARM] 3365/1: [cleanup] header for compat.c exported functions Patch from Ben Dooks arch/arm/kernel/compat.c exports two functions, convert_to_tag_list and squash_mem_tags which are not defined in any header files, and not used outside arch/arm/kernel. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/kernel/compat.c | 2 ++ arch/arm/kernel/compat.h | 13 +++++++++++++ arch/arm/kernel/setup.c | 4 ++-- 3 files changed, 17 insertions(+), 2 deletions(-) create mode 100644 arch/arm/kernel/compat.h (limited to 'arch') diff --git a/arch/arm/kernel/compat.c b/arch/arm/kernel/compat.c index 7195add42e7..60cfa7f3226 100644 --- a/arch/arm/kernel/compat.c +++ b/arch/arm/kernel/compat.c @@ -27,6 +27,8 @@ #include +#include "compat.h" + /* * Usage: * - do not go blindly adding fields, add them at the end diff --git a/arch/arm/kernel/compat.h b/arch/arm/kernel/compat.h new file mode 100644 index 00000000000..27e61a68bd1 --- /dev/null +++ b/arch/arm/kernel/compat.h @@ -0,0 +1,13 @@ +/* + * linux/arch/arm/kernel/compat.h + * + * Copyright (C) 2001 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +extern void convert_to_tag_list(struct tag *tags); + +extern void squash_mem_tags(struct tag *tag); diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 68273b4dc88..c214dc56be4 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -37,6 +37,8 @@ #include #include +#include "compat.h" + #ifndef MEM_SIZE #define MEM_SIZE (16*1024*1024) #endif @@ -55,8 +57,6 @@ __setup("fpe=", fpe_setup); extern unsigned int mem_fclk_21285; extern void paging_init(struct meminfo *, struct machine_desc *desc); -extern void convert_to_tag_list(struct tag *tags); -extern void squash_mem_tags(struct tag *tag); extern void reboot_setup(char *str); extern int root_mountflags; extern void _stext, _text, _etext, __data_start, _edata, _end; -- cgit v1.2.3-18-g5258 From 4333298965cd62585bec891a6a5c9f4c806fc6bd Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 15 Mar 2006 23:18:08 +0000 Subject: [ARM] 3362/1: [cleanup] - duplicate decleration of mem_fclk_21285 Patch from Ben Dooks arch/arm/kernel/setup.c declares mem_fclk_21285 when this is already declared in include/asm-arm/system.h Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/kernel/setup.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index c214dc56be4..08974cbe982 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -55,7 +55,6 @@ static int __init fpe_setup(char *line) __setup("fpe=", fpe_setup); #endif -extern unsigned int mem_fclk_21285; extern void paging_init(struct meminfo *, struct machine_desc *desc); extern void reboot_setup(char *str); extern int root_mountflags; -- cgit v1.2.3-18-g5258 From 0a45d4491d0f172e02126370f312405c5d473363 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 15 Mar 2006 13:47:15 +1100 Subject: powerpc: Fix problem with time going backwards The recent changes to keep gettimeofday in sync with xtime had the side effect that it was occasionally possible for the time reported by gettimeofday to go back by a microsecond. There were two reasons: (1) when we recalculated the offsets used by gettimeofday every 2^31 timebase ticks, we lost an accumulated fractional microsecond, and (2) because the update is done some time after the notional start of jiffy, if ntp is slowing the clock, it is possible to see time go backwards when the timebase factor gets reduced. This fixes it by (a) slowing the gettimeofday clock by about 1us in 2^31 timebase ticks (a factor of less than 1 in 3.7 million), and (b) adjusting the timebase offsets in the rare case that the gettimeofday result could possibly go backwards (i.e. when ntp is slowing the clock and the timer interrupt is late). In this case the adjustment will reduce to zero eventually because of (a). Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/time.c | 48 ++++++++++++++++++++++++++++++++-------------- 1 file changed, 34 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 2a7ddc57937..86f7e3d154d 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -283,9 +283,9 @@ static inline void update_gtod(u64 new_tb_stamp, u64 new_stamp_xsec, * the two values of tb_update_count match and are even then the * tb_to_xs and stamp_xsec values are consistent. If not, then it * loops back and reads them again until this criteria is met. + * We expect the caller to have done the first increment of + * vdso_data->tb_update_count already. */ - ++(vdso_data->tb_update_count); - smp_wmb(); vdso_data->tb_orig_stamp = new_tb_stamp; vdso_data->stamp_xsec = new_stamp_xsec; vdso_data->tb_to_xs = new_tb_to_xs; @@ -310,20 +310,15 @@ static __inline__ void timer_recalc_offset(u64 cur_tb) unsigned long offset; u64 new_stamp_xsec; u64 tlen, t2x; + u64 tb, xsec_old, xsec_new; + struct gettimeofday_vars *varp; if (__USE_RTC()) return; tlen = current_tick_length(); offset = cur_tb - do_gtod.varp->tb_orig_stamp; - if (tlen == last_tick_len && offset < 0x80000000u) { - /* check that we're still in sync; if not, resync */ - struct timeval tv; - __do_gettimeofday(&tv, cur_tb); - if (tv.tv_sec <= xtime.tv_sec && - (tv.tv_sec < xtime.tv_sec || - tv.tv_usec * 1000 <= xtime.tv_nsec)) - return; - } + if (tlen == last_tick_len && offset < 0x80000000u) + return; if (tlen != last_tick_len) { t2x = mulhdu(tlen << TICKLEN_SHIFT, ticklen_to_xs); last_tick_len = tlen; @@ -332,6 +327,21 @@ static __inline__ void timer_recalc_offset(u64 cur_tb) new_stamp_xsec = (u64) xtime.tv_nsec * XSEC_PER_SEC; do_div(new_stamp_xsec, 1000000000); new_stamp_xsec += (u64) xtime.tv_sec * XSEC_PER_SEC; + + ++vdso_data->tb_update_count; + smp_mb(); + + /* + * Make sure time doesn't go backwards for userspace gettimeofday. + */ + tb = get_tb(); + varp = do_gtod.varp; + xsec_old = mulhdu(tb - varp->tb_orig_stamp, varp->tb_to_xs) + + varp->stamp_xsec; + xsec_new = mulhdu(tb - cur_tb, t2x) + new_stamp_xsec; + if (xsec_new < xsec_old) + new_stamp_xsec += xsec_old - xsec_new; + update_gtod(cur_tb, new_stamp_xsec, t2x); } @@ -564,6 +574,10 @@ int do_settimeofday(struct timespec *tv) } #endif + /* Make userspace gettimeofday spin until we're done. */ + ++vdso_data->tb_update_count; + smp_mb(); + /* * Subtract off the number of nanoseconds since the * beginning of the last tick. @@ -724,10 +738,16 @@ void __init time_init(void) * It is computed as: * ticklen_to_xs = 2^N / (tb_ticks_per_jiffy * 1e9) * where N = 64 + 20 - TICKLEN_SCALE - TICKLEN_SHIFT - * so as to give the result as a 0.64 fixed-point fraction. + * which turns out to be N = 51 - SHIFT_HZ. + * This gives the result as a 0.64 fixed-point fraction. + * That value is reduced by an offset amounting to 1 xsec per + * 2^31 timebase ticks to avoid problems with time going backwards + * by 1 xsec when we do timer_recalc_offset due to losing the + * fractional xsec. That offset is equal to ppc_tb_freq/2^51 + * since there are 2^20 xsec in a second. */ - div128_by_32(1ULL << (64 + 20 - TICKLEN_SCALE - TICKLEN_SHIFT), 0, - tb_ticks_per_jiffy, &res); + div128_by_32((1ULL << 51) - ppc_tb_freq, 0, + tb_ticks_per_jiffy << SHIFT_HZ, &res); div128_by_32(res.result_high, res.result_low, NSEC_PER_SEC, &res); ticklen_to_xs = res.result_low; -- cgit v1.2.3-18-g5258 From eacb1962d4594b9d382b40acd73a9c9492718f74 Mon Sep 17 00:00:00 2001 From: Olaf Hering Date: Sat, 4 Mar 2006 13:15:40 +0100 Subject: [PATCH] powerpc: correct cacheflush loop in zImage Correct the loop for cacheflush. No idea where I copied the code from, but the original does not work correct. Maybe the flush is not needed. Signed-off-by: Olaf Hering Signed-off-by: Paul Mackerras --- arch/powerpc/boot/crt0.S | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/crt0.S b/arch/powerpc/boot/crt0.S index e0192c26037..70e65b13e03 100644 --- a/arch/powerpc/boot/crt0.S +++ b/arch/powerpc/boot/crt0.S @@ -45,7 +45,8 @@ _zimage_start: bdnz 2b /* Do a cache flush for our text, in case OF didn't */ -3: lis r9,_start@h +3: lis r9,_start@ha + addi r9,r9,_start@l add r9,r0,r9 lis r8,_etext@ha addi r8,r8,_etext@l @@ -53,7 +54,7 @@ _zimage_start: 4: dcbf r0,r9 icbi r0,r9 addi r9,r9,0x20 - cmplwi 0,r9,8 + cmplw cr0,r9,r8 blt 4b sync isync -- cgit v1.2.3-18-g5258 From e2c552cc89287e31b0b2472866a69a44b150acd2 Mon Sep 17 00:00:00 2001 From: Olaf Hering Date: Mon, 6 Mar 2006 16:39:25 +0100 Subject: [PATCH] powerpc/64: enable CONFIG_BLK_DEV_SL82C105 Enable the onboard IDE driver for p610, p615 and p630. They have the CD connected to this card. All other RS/6000 systems with this controller have no connectors and dont need this option. Signed-off-by: Olaf Hering Signed-off-by: Paul Mackerras --- arch/powerpc/configs/ppc64_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index 0362a70aa97..395e4984778 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -407,7 +407,7 @@ CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_SL82C105 is not set +CONFIG_BLK_DEV_SL82C105=y CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y -- cgit v1.2.3-18-g5258 From cd9c99d7e5f75e137c2ea0cf693773d63c8d945c Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 10 Mar 2006 15:01:08 +1100 Subject: [PATCH] powerpc: Clarify wording for CRASH_DUMP Kconfig option The wording of the CRASH_DUMP Kconfig option is not very clear. It gives you a kernel that can be used _as_ the kdump kernel, not a kernel that can boot into a kdump kernel. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index a834f9e0bbb..dfba81719de 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -580,7 +580,7 @@ config KEXEC strongly in flux, so no good recommendation can be made. config CRASH_DUMP - bool "kernel crash dumps (EXPERIMENTAL)" + bool "Build a kdump crash kernel (EXPERIMENTAL)" depends on PPC_MULTIPLATFORM && PPC64 && EXPERIMENTAL help Build a kernel suitable for use as a kdump capture kernel. -- cgit v1.2.3-18-g5258 From c6cb3b5f368bae67c0b258cfebc0b9dbd8e1d929 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sun, 12 Mar 2006 10:55:01 +1100 Subject: [PATCH] powerpc: enable NAP only on cpus who support it to avoid memory corruption This patch fixes incorrect setting of powersave_nap to 1 on all PowerMacs, potentially causing memory corruption on some models. This bug was introuced by me during the 32/64 bits merge. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/powermac/feature.c | 9 ++++----- arch/powerpc/platforms/powermac/setup.c | 4 ---- 2 files changed, 4 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c index 34714d3ea69..bbe794891a2 100644 --- a/arch/powerpc/platforms/powermac/feature.c +++ b/arch/powerpc/platforms/powermac/feature.c @@ -2491,9 +2491,7 @@ found: pmac_mb.model_id = PMAC_TYPE_COMET; iounmap(mach_id_ptr); } -#endif /* CONFIG_POWER4 */ -#ifdef CONFIG_6xx /* Set default value of powersave_nap on machines that support it. * It appears that uninorth rev 3 has a problem with it, we don't * enable it on those. In theory, the flush-on-lock property is @@ -2522,10 +2520,11 @@ found: * NAP mode */ powersave_lowspeed = 1; -#endif /* CONFIG_6xx */ -#ifdef CONFIG_POWER4 + +#else /* CONFIG_POWER4 */ powersave_nap = 1; -#endif +#endif /* CONFIG_POWER4 */ + /* Check for "mobile" machine */ if (model && (strncmp(model, "PowerBook", 9) == 0 || strncmp(model, "iBook", 5) == 0)) diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 1955462f408..29c2946f1c7 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -621,10 +621,6 @@ static void __init pmac_init_early(void) /* Probe motherboard chipset */ pmac_feature_init(); - /* We can NAP */ - powersave_nap = 1; - printk(KERN_INFO "Using native/NAP idle loop\n"); - /* Initialize debug stuff */ udbg_scc_init(!!strstr(cmd_line, "sccdbg")); udbg_adb_init(!!strstr(cmd_line, "btextdbg")); -- cgit v1.2.3-18-g5258 From 0e8ed479125a6d246e17cfe6c24e140bfeb01972 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Tue, 14 Mar 2006 17:11:51 +1100 Subject: [PATCH] powerpc: RTC memory corruption We should be memset'ing the data we are pointing to, not the pointer itself. This is in an error path so we probably don't hit it much. Signed-off-by: Michael Neuling Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/rtas-rtc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/rtas-rtc.c b/arch/powerpc/kernel/rtas-rtc.c index 635d3b9a881..34d073fb609 100644 --- a/arch/powerpc/kernel/rtas-rtc.c +++ b/arch/powerpc/kernel/rtas-rtc.c @@ -52,7 +52,7 @@ void rtas_get_rtc_time(struct rtc_time *rtc_tm) error = rtas_call(rtas_token("get-time-of-day"), 0, 8, ret); if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) { if (in_interrupt() && printk_ratelimit()) { - memset(&rtc_tm, 0, sizeof(struct rtc_time)); + memset(rtc_tm, 0, sizeof(struct rtc_time)); printk(KERN_WARNING "error: reading clock" " would delay interrupt\n"); return; /* delay not allowed */ -- cgit v1.2.3-18-g5258 From 920573bd03bf690135967b5022362d34ede589c3 Mon Sep 17 00:00:00 2001 From: Olaf Hering Date: Tue, 14 Mar 2006 21:21:11 +0100 Subject: [PATCH] powerpc: remove duplicate EXPORT_SYMBOLS remove warnings when building a 64bit kernel. smp_call_function triggers also with 32bit kernel. WARNING: vmlinux: duplicate symbol 'smp_call_function' previous definition was in vmlinux arch/powerpc/kernel/ppc_ksyms.c:164:EXPORT_SYMBOL(smp_call_function); arch/powerpc/kernel/smp.c:300:EXPORT_SYMBOL(smp_call_function); WARNING: vmlinux: duplicate symbol 'ioremap' previous definition was in vmlinux arch/powerpc/kernel/ppc_ksyms.c:113:EXPORT_SYMBOL(ioremap); arch/powerpc/mm/pgtable_64.c:321:EXPORT_SYMBOL(ioremap); WARNING: vmlinux: duplicate symbol '__ioremap' previous definition was in vmlinux arch/powerpc/kernel/ppc_ksyms.c:117:EXPORT_SYMBOL(__ioremap); arch/powerpc/mm/pgtable_64.c:322:EXPORT_SYMBOL(__ioremap); WARNING: vmlinux: duplicate symbol 'iounmap' previous definition was in vmlinux arch/powerpc/kernel/ppc_ksyms.c:118:EXPORT_SYMBOL(iounmap); arch/powerpc/mm/pgtable_64.c:323:EXPORT_SYMBOL(iounmap); Signed-off-by: Olaf Hering Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/ppc_ksyms.c | 10 ---------- arch/powerpc/mm/pgtable_32.c | 5 +++++ 2 files changed, 5 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index 8a731ea877b..63ecbec0520 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -110,15 +110,6 @@ EXPORT_SYMBOL(_insw_ns); EXPORT_SYMBOL(_outsw_ns); EXPORT_SYMBOL(_insl_ns); EXPORT_SYMBOL(_outsl_ns); -EXPORT_SYMBOL(ioremap); -#ifdef CONFIG_44x -EXPORT_SYMBOL(ioremap64); -#endif -EXPORT_SYMBOL(__ioremap); -EXPORT_SYMBOL(iounmap); -#ifdef CONFIG_PPC32 -EXPORT_SYMBOL(ioremap_bot); /* aka VMALLOC_END */ -#endif #if defined(CONFIG_PPC32) && (defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)) EXPORT_SYMBOL(ppc_ide_md); @@ -161,7 +152,6 @@ EXPORT_SYMBOL(__flush_icache_range); EXPORT_SYMBOL(flush_dcache_range); #ifdef CONFIG_SMP -EXPORT_SYMBOL(smp_call_function); #ifdef CONFIG_PPC32 EXPORT_SYMBOL(smp_hw_index); #endif diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c index f4e5ac12261..d296eb6b454 100644 --- a/arch/powerpc/mm/pgtable_32.c +++ b/arch/powerpc/mm/pgtable_32.c @@ -37,6 +37,7 @@ unsigned long ioremap_base; unsigned long ioremap_bot; +EXPORT_SYMBOL(ioremap_bot); /* aka VMALLOC_END */ int io_bat_index; #if defined(CONFIG_6xx) || defined(CONFIG_POWER3) @@ -153,6 +154,7 @@ ioremap64(unsigned long long addr, unsigned long size) { return __ioremap(addr, size, _PAGE_NO_CACHE); } +EXPORT_SYMBOL(ioremap64); void __iomem * ioremap(phys_addr_t addr, unsigned long size) @@ -162,6 +164,7 @@ ioremap(phys_addr_t addr, unsigned long size) return ioremap64(addr64, size); } #endif /* CONFIG_PHYS_64BIT */ +EXPORT_SYMBOL(ioremap); void __iomem * __ioremap(phys_addr_t addr, unsigned long size, unsigned long flags) @@ -247,6 +250,7 @@ __ioremap(phys_addr_t addr, unsigned long size, unsigned long flags) out: return (void __iomem *) (v + ((unsigned long)addr & ~PAGE_MASK)); } +EXPORT_SYMBOL(__ioremap); void iounmap(volatile void __iomem *addr) { @@ -259,6 +263,7 @@ void iounmap(volatile void __iomem *addr) if (addr > high_memory && (unsigned long) addr < ioremap_bot) vunmap((void *) (PAGE_MASK & (unsigned long)addr)); } +EXPORT_SYMBOL(iounmap); void __iomem *ioport_map(unsigned long port, unsigned int len) { -- cgit v1.2.3-18-g5258 From 92eb4602eb5c37db86cd9d2b1f4c8ca304fbc49f Mon Sep 17 00:00:00 2001 From: John Rose Date: Tue, 14 Mar 2006 17:46:45 -0600 Subject: [PATCH] powerpc: properly configure DDR/P5IOC children devs The dynamic add path for PCI Host Bridges can fail to configure children adapters under P5IOC controllers. It fails to properly fixup bus/device resources, and it fails to properly enable EEH. Both of these steps need to occur before any children devices are enabled in pci_bus_add_devices(). Signed-off-by: John Rose Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/pci_64.c | 5 +++-- arch/powerpc/kernel/rtas_pci.c | 24 +----------------------- arch/powerpc/platforms/pseries/pci_dlpar.c | 28 ++++++++++++++++++++++++++++ 3 files changed, 32 insertions(+), 25 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index c367520bc1c..ba92bab7cc2 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -589,7 +589,6 @@ void __devinit scan_phb(struct pci_controller *hose) #endif /* CONFIG_PPC_MULTIPLATFORM */ if (mode == PCI_PROBE_NORMAL) hose->last_busno = bus->subordinate = pci_scan_child_bus(bus); - pci_bus_add_devices(bus); } static int __init pcibios_init(void) @@ -608,8 +607,10 @@ static int __init pcibios_init(void) printk("PCI: Probing PCI hardware\n"); /* Scan all of the recorded PCI controllers. */ - list_for_each_entry_safe(hose, tmp, &hose_list, list_node) + list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { scan_phb(hose); + pci_bus_add_devices(hose->bus); + } #ifndef CONFIG_PPC_ISERIES if (pci_probe_only) diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c index 5579f655991..7442775ef2a 100644 --- a/arch/powerpc/kernel/rtas_pci.c +++ b/arch/powerpc/kernel/rtas_pci.c @@ -280,8 +280,7 @@ static int phb_set_bus_ranges(struct device_node *dev, return 0; } -static int __devinit setup_phb(struct device_node *dev, - struct pci_controller *phb) +int __devinit setup_phb(struct device_node *dev, struct pci_controller *phb) { if (is_python(dev)) python_countermeasures(dev); @@ -359,27 +358,6 @@ unsigned long __init find_and_init_phbs(void) return 0; } -struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn) -{ - struct pci_controller *phb; - int primary; - - primary = list_empty(&hose_list); - phb = pcibios_alloc_controller(dn); - if (!phb) - return NULL; - setup_phb(dn, phb); - pci_process_bridge_OF_ranges(phb, dn, primary); - - pci_setup_phb_io_dynamic(phb, primary); - - pci_devs_phb_init_dynamic(phb); - scan_phb(phb); - - return phb; -} -EXPORT_SYMBOL(init_phb_dynamic); - /* RPA-specific bits for removing PHBs */ int pcibios_remove_root_bus(struct pci_controller *phb) { diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c index f3bad900bbc..44abdeb9ca0 100644 --- a/arch/powerpc/platforms/pseries/pci_dlpar.c +++ b/arch/powerpc/platforms/pseries/pci_dlpar.c @@ -27,6 +27,7 @@ #include #include +#include static struct pci_bus * find_bus_among_children(struct pci_bus *bus, @@ -179,3 +180,30 @@ pcibios_add_pci_devices(struct pci_bus * bus) } } EXPORT_SYMBOL_GPL(pcibios_add_pci_devices); + +struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn) +{ + struct pci_controller *phb; + int primary; + + primary = list_empty(&hose_list); + phb = pcibios_alloc_controller(dn); + if (!phb) + return NULL; + setup_phb(dn, phb); + pci_process_bridge_OF_ranges(phb, dn, 0); + + pci_setup_phb_io_dynamic(phb, primary); + + pci_devs_phb_init_dynamic(phb); + + if (dn->child) + eeh_add_device_tree_early(dn); + + scan_phb(phb); + pcibios_fixup_new_pci_devices(phb->bus, 0); + pci_bus_add_devices(phb->bus); + + return phb; +} +EXPORT_SYMBOL_GPL(init_phb_dynamic); -- cgit v1.2.3-18-g5258 From 1ae5db3742a0cfaf347231ff0bf181132c64e883 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 15 Mar 2006 16:22:54 +1100 Subject: powerpc: update defconfigs Signed-off-by: Paul Mackerras --- arch/powerpc/configs/cell_defconfig | 94 ++++++++++++++++++++--------- arch/powerpc/configs/iseries_defconfig | 96 ++++++++++++++++++------------ arch/powerpc/configs/maple_defconfig | 50 +++++++++++++--- arch/powerpc/configs/mpc834x_sys_defconfig | 32 +++++----- arch/powerpc/configs/pmac32_defconfig | 77 +++++++++++++++--------- 5 files changed, 232 insertions(+), 117 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig index 063b84f2cbe..3c2acab6373 100644 --- a/arch/powerpc/configs/cell_defconfig +++ b/arch/powerpc/configs/cell_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc5 -# Tue Dec 20 15:59:26 2005 +# Linux kernel version: 2.6.16-rc6 +# Wed Mar 15 16:19:48 2006 # CONFIG_PPC64=y CONFIG_64BIT=y @@ -16,6 +16,10 @@ CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +# CONFIG_DEFAULT_UIMAGE is not set # # Processor support @@ -33,7 +37,6 @@ CONFIG_NR_CPUS=4 # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -48,8 +51,6 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set # CONFIG_CPUSETS is not set CONFIG_INITRAMFS_SOURCE="" @@ -58,8 +59,10 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -68,8 +71,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -111,7 +116,6 @@ CONFIG_PPC_MULTIPLATFORM=y # CONFIG_PPC_PMAC is not set # CONFIG_PPC_MAPLE is not set CONFIG_PPC_CELL=y -CONFIG_PPC_OF=y # CONFIG_U3_DART is not set CONFIG_PPC_RTAS=y # CONFIG_RTAS_ERROR_LOGGING is not set @@ -120,10 +124,14 @@ CONFIG_RTAS_FLASH=y CONFIG_MMIO_NVRAM=y CONFIG_CELL_IIC=y # CONFIG_PPC_MPC106 is not set -# CONFIG_GENERIC_TBSYNC is not set # CONFIG_CPU_FREQ is not set # CONFIG_WANT_EARLY_SERIAL is not set +# +# Cell Broadband Engine options +# +CONFIG_SPU_FS=y + # # Kernel options # @@ -140,6 +148,7 @@ CONFIG_BINFMT_ELF=y CONFIG_FORCE_MAX_ZONEORDER=13 # CONFIG_IOMMU_VMERGE is not set CONFIG_KEXEC=y +# CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y # CONFIG_NUMA is not set CONFIG_ARCH_SELECT_MEMORY_MODEL=y @@ -191,6 +200,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -234,6 +244,25 @@ CONFIG_NETFILTER=y # Core Netfilter Configuration # # CONFIG_NETFILTER_NETLINK is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # # IP: Netfilter Configuration @@ -251,37 +280,23 @@ CONFIG_IP_NF_AMANDA=m # CONFIG_IP_NF_PPTP is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m CONFIG_IP_NF_MATCH_MULTIPORT=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_DSCP=m CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -# CONFIG_IP_NF_MATCH_DCCP is not set -CONFIG_IP_NF_MATCH_COMMENT=m CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_STRING=m +CONFIG_IP_NF_MATCH_POLICY=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_TARGET_NFQUEUE=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m @@ -297,11 +312,8 @@ CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m CONFIG_IP_NF_TARGET_TTL=m CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m @@ -311,7 +323,6 @@ CONFIG_IP_NF_ARP_MANGLE=m # # CONFIG_IP6_NF_QUEUE is not set # CONFIG_IP6_NF_IPTABLES is not set -# CONFIG_IP6_NF_TARGET_NFQUEUE is not set # # DCCP Configuration (EXPERIMENTAL) @@ -322,6 +333,11 @@ CONFIG_IP_NF_ARP_MANGLE=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -540,9 +556,11 @@ CONFIG_E1000=m # CONFIG_R8169 is not set # CONFIG_SIS190 is not set CONFIG_SKGE=m +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_SPIDER_NET=y # CONFIG_MV643XX_ETH is not set # @@ -628,13 +646,16 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set # CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set # CONFIG_SYNCLINK is not set # CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set # CONFIG_N_HDLC is not set # CONFIG_SPECIALIX is not set # CONFIG_SX is not set @@ -646,6 +667,7 @@ CONFIG_SERIAL_NONSTANDARD=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -755,6 +777,12 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -827,7 +855,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # # @@ -847,6 +875,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -886,6 +915,7 @@ CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -951,6 +981,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # @@ -1021,18 +1052,20 @@ CONFIG_TEXTSEARCH_FSM=m # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=15 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y # CONFIG_DEBUG_VM is not set +# CONFIG_FORCED_INLINING is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set @@ -1040,6 +1073,11 @@ CONFIG_DEBUGGER=y # CONFIG_XMON is not set CONFIG_IRQSTACKS=y # CONFIG_BOOTX_TEXT is not set +# CONFIG_PPC_EARLY_DEBUG_LPAR is not set +# CONFIG_PPC_EARLY_DEBUG_G5 is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS is not set +# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set +# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set # # Security options diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig index c775027947f..1816a46742f 100644 --- a/arch/powerpc/configs/iseries_defconfig +++ b/arch/powerpc/configs/iseries_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc5 -# Tue Dec 20 15:59:32 2005 +# Linux kernel version: 2.6.16-rc6 +# Wed Mar 15 16:19:52 2006 # CONFIG_PPC64=y CONFIG_64BIT=y @@ -16,6 +16,10 @@ CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +# CONFIG_PPC_UDBG_16550 is not set +# CONFIG_GENERIC_TBSYNC is not set +# CONFIG_DEFAULT_UIMAGE is not set # # Processor support @@ -33,7 +37,6 @@ CONFIG_NR_CPUS=32 # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -49,8 +52,6 @@ CONFIG_POSIX_MQUEUE=y CONFIG_SYSCTL=y CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set @@ -60,8 +61,10 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -70,8 +73,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -113,7 +118,6 @@ CONFIG_PPC_ISERIES=y # CONFIG_MMIO_NVRAM is not set CONFIG_IBMVIO=y # CONFIG_PPC_MPC106 is not set -# CONFIG_GENERIC_TBSYNC is not set # CONFIG_CPU_FREQ is not set # CONFIG_WANT_EARLY_SERIAL is not set @@ -183,6 +187,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -220,6 +225,28 @@ CONFIG_NETFILTER=y # Core Netfilter Configuration # # CONFIG_NETFILTER_NETLINK is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # # IP: Netfilter Configuration @@ -237,39 +264,23 @@ CONFIG_IP_NF_AMANDA=m # CONFIG_IP_NF_PPTP is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m CONFIG_IP_NF_MATCH_MULTIPORT=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_DSCP=m CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -# CONFIG_IP_NF_MATCH_DCCP is not set -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_CONNBYTES=m CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_STRING=m +CONFIG_IP_NF_MATCH_POLICY=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_TARGET_NFQUEUE=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m @@ -285,13 +296,9 @@ CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CONNMARK=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m @@ -305,6 +312,11 @@ CONFIG_IP_NF_ARP_MANGLE=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -451,13 +463,7 @@ CONFIG_SCSI_IBMVSCSI=m # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -574,6 +580,7 @@ CONFIG_E1000=m # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set @@ -722,6 +729,12 @@ CONFIG_MAX_RAW_DEVS=256 # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -788,7 +801,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # # @@ -825,6 +838,7 @@ CONFIG_XFS_EXPORT=y CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -865,6 +879,7 @@ CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -993,31 +1008,36 @@ CONFIG_TEXTSEARCH_FSM=m # # Instrumentation Support # -CONFIG_PROFILING=y -CONFIG_OPROFILE=y # CONFIG_KPROBES is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=17 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y # CONFIG_DEBUG_VM is not set +# CONFIG_FORCED_INLINING is not set # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y # CONFIG_DEBUGGER is not set CONFIG_IRQSTACKS=y +# CONFIG_PPC_EARLY_DEBUG_LPAR is not set +# CONFIG_PPC_EARLY_DEBUG_G5 is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS is not set +# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set +# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set # # Security options diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig index 68194c03f6d..80a0db43aeb 100644 --- a/arch/powerpc/configs/maple_defconfig +++ b/arch/powerpc/configs/maple_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc5 -# Tue Dec 20 15:59:36 2005 +# Linux kernel version: 2.6.16-rc6 +# Wed Mar 15 16:19:54 2006 # CONFIG_PPC64=y CONFIG_64BIT=y @@ -16,6 +16,10 @@ CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +CONFIG_GENERIC_TBSYNC=y +# CONFIG_DEFAULT_UIMAGE is not set # # Processor support @@ -32,7 +36,6 @@ CONFIG_NR_CPUS=2 # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -47,8 +50,6 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set @@ -58,8 +59,10 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -68,8 +71,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -111,14 +116,12 @@ CONFIG_PPC_MULTIPLATFORM=y # CONFIG_PPC_PMAC is not set CONFIG_PPC_MAPLE=y # CONFIG_PPC_CELL is not set -CONFIG_PPC_OF=y CONFIG_U3_DART=y CONFIG_MPIC=y # CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set CONFIG_MPIC_BROKEN_U3=y # CONFIG_PPC_MPC106 is not set -CONFIG_GENERIC_TBSYNC=y # CONFIG_CPU_FREQ is not set # CONFIG_WANT_EARLY_SERIAL is not set @@ -138,6 +141,7 @@ CONFIG_BINFMT_ELF=y CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y CONFIG_KEXEC=y +# CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y # CONFIG_NUMA is not set CONFIG_ARCH_SELECT_MEMORY_MODEL=y @@ -189,6 +193,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -226,6 +231,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -461,6 +471,7 @@ CONFIG_E1000=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set @@ -553,6 +564,7 @@ CONFIG_HW_CONSOLE=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -650,6 +662,12 @@ CONFIG_I2C_AMD8111=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -738,12 +756,14 @@ CONFIG_USB_UHCI_HCD=y # may also be needed; see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set # CONFIG_USB_AIPTEK is not set @@ -757,6 +777,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -797,6 +818,7 @@ CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_SERIAL_AIRPRIME is not set # CONFIG_USB_SERIAL_ANYDATA is not set # CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set # CONFIG_USB_SERIAL_CP2101 is not set CONFIG_USB_SERIAL_CYPRESS_M8=m @@ -873,7 +895,7 @@ CONFIG_USB_EZUSB=y # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # # @@ -891,6 +913,7 @@ CONFIG_JBD=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -927,6 +950,7 @@ CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -988,6 +1012,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # @@ -1053,18 +1078,20 @@ CONFIG_ZLIB_INFLATE=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=17 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set CONFIG_DEBUG_SLAB=y +# CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y # CONFIG_DEBUG_VM is not set +# CONFIG_FORCED_INLINING is not set # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y @@ -1073,6 +1100,11 @@ CONFIG_XMON=y CONFIG_XMON_DEFAULT=y # CONFIG_IRQSTACKS is not set CONFIG_BOOTX_TEXT=y +# CONFIG_PPC_EARLY_DEBUG_LPAR is not set +# CONFIG_PPC_EARLY_DEBUG_G5 is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS is not set +# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set +# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set # # Security options diff --git a/arch/powerpc/configs/mpc834x_sys_defconfig b/arch/powerpc/configs/mpc834x_sys_defconfig index 3bff761965c..5078b0441d6 100644 --- a/arch/powerpc/configs/mpc834x_sys_defconfig +++ b/arch/powerpc/configs/mpc834x_sys_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-g461d4edf-dirty -# Fri Jan 13 11:01:47 2006 +# Linux kernel version: 2.6.16-rc6 +# Wed Mar 15 16:19:56 2006 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -43,7 +43,6 @@ CONFIG_PPC_STD_MMU_32=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -189,6 +188,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -226,6 +226,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -511,6 +516,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -614,6 +620,12 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -632,6 +644,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set @@ -716,7 +729,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # # @@ -826,6 +839,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # @@ -899,13 +913,3 @@ CONFIG_CRYPTO_DES=y # # Hardware crypto devices # - -# -# SEC2.x Options -# -CONFIG_MPC8349E_SEC2x=y - -# -# SEC2.x Test Options -# -CONFIG_MPC8349E_SEC2xTEST=y diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig index 2ace57d1e33..57a027971d6 100644 --- a/arch/powerpc/configs/pmac32_defconfig +++ b/arch/powerpc/configs/pmac32_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15 -# Sat Jan 14 16:26:08 2006 +# Linux kernel version: 2.6.16-rc6 +# Wed Mar 15 16:21:32 2006 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -17,8 +17,8 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y # CONFIG_PPC_UDBG_16550 is not set -# CONFIG_CRASH_DUMP is not set # CONFIG_GENERIC_TBSYNC is not set +# CONFIG_DEFAULT_UIMAGE is not set # # Processor support @@ -43,7 +43,6 @@ CONFIG_PPC_STD_MMU_32=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -236,6 +235,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -271,6 +271,25 @@ CONFIG_NETFILTER=y # Core Netfilter Configuration # # CONFIG_NETFILTER_NETLINK is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # # IP: Netfilter Configuration @@ -288,37 +307,22 @@ CONFIG_IP_NF_AMANDA=m CONFIG_IP_NF_PPTP=m # CONFIG_IP_NF_QUEUE is not set CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m CONFIG_IP_NF_MATCH_MULTIPORT=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_DSCP=m CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m CONFIG_IP_NF_MATCH_OWNER=m -# CONFIG_IP_NF_MATCH_ADDRTYPE is not set -# CONFIG_IP_NF_MATCH_REALM is not set -# CONFIG_IP_NF_MATCH_SCTP is not set -CONFIG_IP_NF_MATCH_DCCP=m -# CONFIG_IP_NF_MATCH_COMMENT is not set -# CONFIG_IP_NF_MATCH_HASHLIMIT is not set -CONFIG_IP_NF_MATCH_STRING=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -# CONFIG_IP_NF_TARGET_LOG is not set +CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m -# CONFIG_IP_NF_TARGET_NFQUEUE is not set CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m @@ -331,9 +335,12 @@ CONFIG_IP_NF_NAT_FTP=m CONFIG_IP_NF_NAT_TFTP=m CONFIG_IP_NF_NAT_AMANDA=m CONFIG_IP_NF_NAT_PPTP=m -# CONFIG_IP_NF_MANGLE is not set +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_TTL=m CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m @@ -360,6 +367,11 @@ CONFIG_IP_DCCP_TFRC_LIB=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -377,6 +389,7 @@ CONFIG_IP_DCCP_TFRC_LIB=m # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y # # Network testing @@ -568,7 +581,6 @@ CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set CONFIG_BLK_DEV_PDC202XX_NEW=y -# CONFIG_PDC202XX_FORCE is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SLC90E66 is not set @@ -654,8 +666,7 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE is not set +# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -991,6 +1002,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_CORE=m CONFIG_SERIAL_PMACZILOG=m +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -1097,6 +1109,12 @@ CONFIG_I2C_POWERMAC=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -1348,6 +1366,7 @@ CONFIG_USB_PRINTER=m # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y +CONFIG_USB_HIDINPUT_POWERBOOK=y # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set # CONFIG_USB_AIPTEK is not set @@ -1488,7 +1507,7 @@ CONFIG_USB_EZUSB=y # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # # @@ -1609,6 +1628,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # @@ -1692,6 +1712,7 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set +# CONFIG_FORCED_INLINING is not set # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUGGER=y CONFIG_XMON=y -- cgit v1.2.3-18-g5258 From 9e7714d08061a77d3d2ec9a6ef6fd571a534fc7f Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 16 Mar 2006 14:10:20 +0000 Subject: [ARM] 3367/1: CLCD mode no longer supported on the RealView boards Patch from Catalin Marinas Chosing of the CLCD RGB mode is no longer possible via the SYS_CLCD register on the RealView boards. Instead, this configuration is done in the CLCD primecell control register directly. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mach-realview/core.c | 28 ++-------------------------- 1 file changed, 2 insertions(+), 26 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 4303d988c4b..d13270c5d7c 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -202,11 +202,6 @@ struct clk realview_clcd_clk = { /* * CLCD support. */ -#define SYS_CLCD_MODE_MASK (3 << 0) -#define SYS_CLCD_MODE_888 (0 << 0) -#define SYS_CLCD_MODE_5551 (1 << 0) -#define SYS_CLCD_MODE_565_RLSB (2 << 0) -#define SYS_CLCD_MODE_565_BLSB (3 << 0) #define SYS_CLCD_NLCDIOON (1 << 2) #define SYS_CLCD_VDDPOSSWITCH (1 << 3) #define SYS_CLCD_PWR3V5SWITCH (1 << 4) @@ -360,29 +355,10 @@ static void realview_clcd_enable(struct clcd_fb *fb) void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET; u32 val; - val = readl(sys_clcd); - val &= ~SYS_CLCD_MODE_MASK; - - switch (fb->fb.var.green.length) { - case 5: - val |= SYS_CLCD_MODE_5551; - break; - case 6: - val |= SYS_CLCD_MODE_565_RLSB; - break; - case 8: - val |= SYS_CLCD_MODE_888; - break; - } - - /* - * Set the MUX - */ - writel(val, sys_clcd); - /* - * And now enable the PSUs + * Enable the PSUs */ + val = readl(sys_clcd); val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH; writel(val, sys_clcd); } -- cgit v1.2.3-18-g5258 From d116fe5aeafd8226712d2de9c69428725ca74474 Mon Sep 17 00:00:00 2001 From: Eric Sesterhenn Date: Mon, 6 Mar 2006 21:13:32 +0100 Subject: [PATCH] kzalloc() conversion in arch/ppc This converts arch/ppc to kzalloc usage. Crosscompile tested with allyesconfig. Signed-off-by: Eric Sesterhenn Signed-off-by: Paul Mackerras --- arch/ppc/4xx_io/serial_sicc.c | 3 +-- arch/ppc/kernel/smp-tbsync.c | 3 +-- arch/ppc/platforms/katana.c | 3 +-- arch/ppc/platforms/radstone_ppc7d.c | 3 +-- arch/ppc/syslib/ocp.c | 3 +-- 5 files changed, 5 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/ppc/4xx_io/serial_sicc.c b/arch/ppc/4xx_io/serial_sicc.c index 4dc6aa2abfc..98b25fa0049 100644 --- a/arch/ppc/4xx_io/serial_sicc.c +++ b/arch/ppc/4xx_io/serial_sicc.c @@ -1637,9 +1637,8 @@ static struct SICC_info *siccuart_get(int line) state->count++; if (state->info) return state->info; - info = kmalloc(sizeof(struct SICC_info), GFP_KERNEL); + info = kzalloc(sizeof(struct SICC_info), GFP_KERNEL); if (info) { - memset(info, 0, sizeof(struct SICC_info)); init_waitqueue_head(&info->open_wait); init_waitqueue_head(&info->close_wait); init_waitqueue_head(&info->delta_msr_wait); diff --git a/arch/ppc/kernel/smp-tbsync.c b/arch/ppc/kernel/smp-tbsync.c index 2c9cd95bcea..6a5694fcc71 100644 --- a/arch/ppc/kernel/smp-tbsync.c +++ b/arch/ppc/kernel/smp-tbsync.c @@ -126,8 +126,7 @@ smp_generic_give_timebase( void ) printk("Synchronizing timebase\n"); /* if this fails then this kernel won't work anyway... */ - tbsync = kmalloc( sizeof(*tbsync), GFP_KERNEL ); - memset( tbsync, 0, sizeof(*tbsync) ); + tbsync = kzalloc( sizeof(*tbsync), GFP_KERNEL ); mb(); running = 1; diff --git a/arch/ppc/platforms/katana.c b/arch/ppc/platforms/katana.c index d2766617c3c..6f3bc616174 100644 --- a/arch/ppc/platforms/katana.c +++ b/arch/ppc/platforms/katana.c @@ -662,12 +662,11 @@ katana_setup_mtd(void) ptbl_entries = (size >= (64*MB)) ? 6 : 4; - if ((ptbl = kmalloc(ptbl_entries * sizeof(struct mtd_partition), + if ((ptbl = kcalloc(ptbl_entries, sizeof(struct mtd_partition), GFP_KERNEL)) == NULL) { printk(KERN_WARNING "Can't alloc MTD partition table\n"); return -ENOMEM; } - memset(ptbl, 0, ptbl_entries * sizeof(struct mtd_partition)); ptbl[0].name = "Monitor"; ptbl[0].size = KATANA_MTD_MONITOR_SIZE; diff --git a/arch/ppc/platforms/radstone_ppc7d.c b/arch/ppc/platforms/radstone_ppc7d.c index 1b1e7c5ef15..30188085bd3 100644 --- a/arch/ppc/platforms/radstone_ppc7d.c +++ b/arch/ppc/platforms/radstone_ppc7d.c @@ -683,11 +683,10 @@ ppc7d_fixup_i2c_pdata(struct platform_device *pdev) pdata = pdev->dev.platform_data; if (pdata == NULL) { - pdata = kmalloc(sizeof(*pdata), GFP_KERNEL); + pdata = kzalloc(sizeof(*pdata), GFP_KERNEL); if (pdata == NULL) return; - memset(pdata, 0, sizeof(*pdata)); pdev->dev.platform_data = pdata; } diff --git a/arch/ppc/syslib/ocp.c b/arch/ppc/syslib/ocp.c index 2fe28ded2c6..a4ecc2ee579 100644 --- a/arch/ppc/syslib/ocp.c +++ b/arch/ppc/syslib/ocp.c @@ -451,10 +451,9 @@ ocp_driver_init(void) DBG(("ocp: ocp_driver_init()...\n")); /* Allocate/register primary OCP bus */ - ocp_bus = kmalloc(sizeof(struct device), GFP_KERNEL); + ocp_bus = kzalloc(sizeof(struct device), GFP_KERNEL); if (ocp_bus == NULL) return 1; - memset(ocp_bus, 0, sizeof(struct device)); strcpy(ocp_bus->bus_id, "ocp"); bus_register(&ocp_bus_type); -- cgit v1.2.3-18-g5258 From 7e5b59384eebe35bff8429243f089931ce1cdf38 Mon Sep 17 00:00:00 2001 From: Olaf Hering Date: Wed, 8 Mar 2006 20:40:28 +0100 Subject: [PATCH] powerpc: add a raw dump command to xmon Dump a stream of rawbytes with a new 'dr' command. Produces less output and it is simpler to feed the output to scripts. Also, dr has no dumpsize limits. Signed-off-by: Olaf Hering Signed-off-by: Paul Mackerras --- arch/powerpc/xmon/xmon.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 7d02fa2a899..4735b41c113 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -191,6 +191,7 @@ Commands:\n\ di dump instructions\n\ df dump float values\n\ dd dump double values\n\ + dr dump stream of raw bytes\n\ e print exception information\n\ f flush cache\n\ la lookup symbol+offset of specified address\n\ @@ -1938,6 +1939,28 @@ bsesc(void) return c; } +static void xmon_rawdump (unsigned long adrs, long ndump) +{ + long n, m, r, nr; + unsigned char temp[16]; + + for (n = ndump; n > 0;) { + r = n < 16? n: 16; + nr = mread(adrs, temp, r); + adrs += nr; + for (m = 0; m < r; ++m) { + if (m < nr) + printf("%.2x", temp[m]); + else + printf("%s", fault_chars[fault_type]); + } + n -= r; + if (nr < r) + break; + } + printf("\n"); +} + #define isxdigit(c) (('0' <= (c) && (c) <= '9') \ || ('a' <= (c) && (c) <= 'f') \ || ('A' <= (c) && (c) <= 'F')) @@ -1960,6 +1983,13 @@ dump(void) nidump = MAX_DUMP; adrs += ppc_inst_dump(adrs, nidump, 1); last_cmd = "di\n"; + } else if (c == 'r') { + scanhex(&ndump); + if (ndump == 0) + ndump = 64; + xmon_rawdump(adrs, ndump); + adrs += ndump; + last_cmd = "dr\n"; } else { scanhex(&ndump); if (ndump == 0) -- cgit v1.2.3-18-g5258 From bbbe1212bd6f815290f782ba5b489467b54131dc Mon Sep 17 00:00:00 2001 From: Adrian Cox Date: Wed, 8 Mar 2006 22:10:20 +0000 Subject: [PATCH] ppc: Fix platform_notify functions marked __init While adding USB support to an MV64360 based board this week, I discovered that all MV64x60 boards in the kernel have platform_notify functions marked with __init. This causes an oops if a device is added after boot. The patch below removes the __init markers. I do not have all these boards to test on, but the change seems very unlikely to break anything else. Signed-off-by: Adrian Cox Signed-off-by: Paul Mackerras --- arch/ppc/platforms/cpci690.c | 2 +- arch/ppc/platforms/ev64260.c | 2 +- arch/ppc/platforms/ev64360.c | 2 +- arch/ppc/platforms/hdpu.c | 2 +- arch/ppc/platforms/katana.c | 2 +- arch/ppc/platforms/radstone_ppc7d.c | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/ppc/platforms/cpci690.c b/arch/ppc/platforms/cpci690.c index 55be550a081..790475c22fd 100644 --- a/arch/ppc/platforms/cpci690.c +++ b/arch/ppc/platforms/cpci690.c @@ -288,7 +288,7 @@ cpci690_fixup_mpsc_pdata(struct platform_device *pdev) pdata->brg_clk_freq = cpci690_get_bus_freq(); } -static int __init +static int cpci690_platform_notify(struct device *dev) { static struct { diff --git a/arch/ppc/platforms/ev64260.c b/arch/ppc/platforms/ev64260.c index 6444760caa3..31e8e21e1d5 100644 --- a/arch/ppc/platforms/ev64260.c +++ b/arch/ppc/platforms/ev64260.c @@ -414,7 +414,7 @@ ev64260_fixup_mpsc_pdata(struct platform_device *pdev) return; } -static int __init +static int ev64260_platform_notify(struct device *dev) { static struct { diff --git a/arch/ppc/platforms/ev64360.c b/arch/ppc/platforms/ev64360.c index b5f52eba4fc..104ac9b16e8 100644 --- a/arch/ppc/platforms/ev64360.c +++ b/arch/ppc/platforms/ev64360.c @@ -298,7 +298,7 @@ ev64360_fixup_eth_pdata(struct platform_device *pdev) } #endif -static int __init +static int ev64360_platform_notify(struct device *dev) { static struct { diff --git a/arch/ppc/platforms/hdpu.c b/arch/ppc/platforms/hdpu.c index 220674d883d..fc869bb5b2b 100644 --- a/arch/ppc/platforms/hdpu.c +++ b/arch/ppc/platforms/hdpu.c @@ -351,7 +351,7 @@ static void __init hdpu_fixup_cpustate_pdata(struct platform_device *pd) } #endif -static int __init hdpu_platform_notify(struct device *dev) +static int hdpu_platform_notify(struct device *dev) { static struct { char *bus_id; diff --git a/arch/ppc/platforms/katana.c b/arch/ppc/platforms/katana.c index 6f3bc616174..ad21280e892 100644 --- a/arch/ppc/platforms/katana.c +++ b/arch/ppc/platforms/katana.c @@ -596,7 +596,7 @@ katana_fixup_mv64xxx_pdata(struct platform_device *pdev) } #endif -static int __init +static int katana_platform_notify(struct device *dev) { static struct { diff --git a/arch/ppc/platforms/radstone_ppc7d.c b/arch/ppc/platforms/radstone_ppc7d.c index 30188085bd3..bc26b6d71c1 100644 --- a/arch/ppc/platforms/radstone_ppc7d.c +++ b/arch/ppc/platforms/radstone_ppc7d.c @@ -709,7 +709,7 @@ ppc7d_fixup_i2c_pdata(struct platform_device *pdev) } #endif -static int __init ppc7d_platform_notify(struct device *dev) +static int ppc7d_platform_notify(struct device *dev) { static struct { char *bus_id; -- cgit v1.2.3-18-g5258 From 898b1920a67048c1f38bb99777f4cff06380a59a Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 9 Mar 2006 23:36:40 -0700 Subject: [PATCH] Fix compile error for ML300/403 Needed due to changes in ppc_sys.c. Signed-off-by: Grant Likely Signed-off-by: Paul Mackerras --- arch/ppc/platforms/4xx/virtex.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ppc/platforms/4xx/virtex.h b/arch/ppc/platforms/4xx/virtex.h index 1a01b81cff1..c14325dfd7b 100644 --- a/arch/ppc/platforms/4xx/virtex.h +++ b/arch/ppc/platforms/4xx/virtex.h @@ -27,7 +27,7 @@ /* Device type enumeration for platform bus definitions */ #ifndef __ASSEMBLY__ enum ppc_sys_devices { - VIRTEX_UART, + VIRTEX_UART, NUM_PPC_SYS_DEVS, }; #endif -- cgit v1.2.3-18-g5258 From 2c276603c3e5ebf38155a9d1fbbda656d52d138e Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 16 Mar 2006 14:47:20 +1100 Subject: [PATCH] powerpc: Fix bug in bug fix for bug in lmb_alloc() My patch (d7a5b2ffa1352f0310630934a56aecbdfb617b72) to always panic if lmb_alloc() fails is broken because it checks alloc < 0, but should be checking alloc == 0. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/mm/lmb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/mm/lmb.c b/arch/powerpc/mm/lmb.c index 874cd103ce6..417d5851855 100644 --- a/arch/powerpc/mm/lmb.c +++ b/arch/powerpc/mm/lmb.c @@ -232,7 +232,7 @@ unsigned long __init lmb_alloc_base(unsigned long size, unsigned long align, alloc = __lmb_alloc_base(size, align, max_addr); - if (alloc < 0) + if (alloc == 0) panic("ERROR: Failed to allocate 0x%lx bytes below 0x%lx.\n", size, max_addr); -- cgit v1.2.3-18-g5258 From 82c3c03a4096badd026c6e337f3c5dde020e9ec6 Mon Sep 17 00:00:00 2001 From: Srivatsa Vaddagiri Date: Thu, 16 Mar 2006 23:04:06 -0800 Subject: [PATCH] x86: check for online cpus before bringing them up Bryce reported a bug wherein offlining CPU0 (on x86 box) and then subsequently onlining it resulted in a lockup. On x86, CPU0 is never offlined. The subsequent attempt to online CPU0 doesn't take that into account. It actually tries to bootup the already booted CPU. Following patch fixes the problem (as acknowledged by Bryce). Please consider for inclusion in 2.6.16. Check if cpu is already online. Signed-off-by: Srivatsa Vaddagiri Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/smpboot.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index eba7f53f8b4..7007e178379 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -1029,6 +1029,16 @@ int __devinit smp_prepare_cpu(int cpu) int apicid, ret; lock_cpu_hotplug(); + + /* + * On x86, CPU0 is never offlined. Trying to bring up an + * already-booted CPU will hang. So check for that case. + */ + if (cpu_online(cpu)) { + ret = -EINVAL; + goto exit; + } + apicid = x86_cpu_to_apicid[cpu]; if (apicid == BAD_APICID) { ret = -ENODEV; -- cgit v1.2.3-18-g5258 From 3a2f735700332621274aca752be3b6f839fa47e7 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 10 Mar 2006 19:47:17 +0000 Subject: [MIPS] Get rid of the IP22-specific code in arclib. This breaks the kernel build if sgiwd93 was configured as a module. Signed-off-by: Ralf Baechle --- arch/mips/arc/misc.c | 19 ------------------- 1 file changed, 19 deletions(-) (limited to 'arch') diff --git a/arch/mips/arc/misc.c b/arch/mips/arc/misc.c index 84867de2202..b2e10b9e945 100644 --- a/arch/mips/arc/misc.c +++ b/arch/mips/arc/misc.c @@ -9,7 +9,6 @@ * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org) * Copyright (C) 1999 Silicon Graphics, Inc. */ -#include #include #include @@ -20,17 +19,11 @@ #include #include -extern void *sgiwd93_host; -extern void reset_wd33c93(void *instance); - VOID ArcHalt(VOID) { bc_disable(); local_irq_disable(); -#ifdef CONFIG_SCSI_SGIWD93 - reset_wd33c93(sgiwd93_host); -#endif ARC_CALL0(halt); never: goto never; } @@ -40,9 +33,6 @@ ArcPowerDown(VOID) { bc_disable(); local_irq_disable(); -#ifdef CONFIG_SCSI_SGIWD93 - reset_wd33c93(sgiwd93_host); -#endif ARC_CALL0(pdown); never: goto never; } @@ -53,9 +43,6 @@ ArcRestart(VOID) { bc_disable(); local_irq_disable(); -#ifdef CONFIG_SCSI_SGIWD93 - reset_wd33c93(sgiwd93_host); -#endif ARC_CALL0(restart); never: goto never; } @@ -65,9 +52,6 @@ ArcReboot(VOID) { bc_disable(); local_irq_disable(); -#ifdef CONFIG_SCSI_SGIWD93 - reset_wd33c93(sgiwd93_host); -#endif ARC_CALL0(reboot); never: goto never; } @@ -77,9 +61,6 @@ ArcEnterInteractiveMode(VOID) { bc_disable(); local_irq_disable(); -#ifdef CONFIG_SCSI_SGIWD93 - reset_wd33c93(sgiwd93_host); -#endif ARC_CALL0(imode); never: goto never; } -- cgit v1.2.3-18-g5258 From de62893bc0725f8b5f0445250577cd7a10b2d8f8 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Mon, 13 Mar 2006 18:23:03 +0900 Subject: [MIPS] local_r4k_flush_cache_page fix If dcache_size != icache_size or dcache_size != scache_size, or set-associative cache, icache/scache does not flushed properly. Make blast_?cache_page_indexed() masks its index value correctly. Also, use physical address for physically indexed pcache/scache. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/mm/c-r4k.c | 13 +++++++++---- arch/mips/mm/c-tx39.c | 1 - 2 files changed, 9 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 0668e9bfce4..9572ed44f0d 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -375,6 +375,7 @@ static void r4k_flush_cache_mm(struct mm_struct *mm) struct flush_cache_page_args { struct vm_area_struct *vma; unsigned long addr; + unsigned long pfn; }; static inline void local_r4k_flush_cache_page(void *args) @@ -382,6 +383,7 @@ static inline void local_r4k_flush_cache_page(void *args) struct flush_cache_page_args *fcp_args = args; struct vm_area_struct *vma = fcp_args->vma; unsigned long addr = fcp_args->addr; + unsigned long paddr = fcp_args->pfn << PAGE_SHIFT; int exec = vma->vm_flags & VM_EXEC; struct mm_struct *mm = vma->vm_mm; pgd_t *pgdp; @@ -431,11 +433,12 @@ static inline void local_r4k_flush_cache_page(void *args) * Do indexed flush, too much work to get the (possible) TLB refills * to work correctly. */ - addr = INDEX_BASE + (addr & (dcache_size - 1)); if (cpu_has_dc_aliases || (exec && !cpu_has_ic_fills_f_dc)) { - r4k_blast_dcache_page_indexed(addr); - if (exec && !cpu_icache_snoops_remote_store) - r4k_blast_scache_page_indexed(addr); + r4k_blast_dcache_page_indexed(cpu_has_pindexed_dcache ? + paddr : addr); + if (exec && !cpu_icache_snoops_remote_store) { + r4k_blast_scache_page_indexed(paddr); + } } if (exec) { if (cpu_has_vtag_icache) { @@ -455,6 +458,7 @@ static void r4k_flush_cache_page(struct vm_area_struct *vma, args.vma = vma; args.addr = addr; + args.pfn = pfn; on_each_cpu(local_r4k_flush_cache_page, &args, 1, 1); } @@ -956,6 +960,7 @@ static void __init probe_pcache(void) switch (c->cputype) { case CPU_20KC: case CPU_25KF: + c->dcache.flags |= MIPS_CACHE_PINDEX; case CPU_R10000: case CPU_R12000: case CPU_SB1: diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c index 7c572bea4a9..fe232e3988e 100644 --- a/arch/mips/mm/c-tx39.c +++ b/arch/mips/mm/c-tx39.c @@ -210,7 +210,6 @@ static void tx39_flush_cache_page(struct vm_area_struct *vma, unsigned long page * Do indexed flush, too much work to get the (possible) TLB refills * to work correctly. */ - page = (KSEG0 + (page & (dcache_size - 1))); if (cpu_has_dc_aliases || exec) tx39_blast_dcache_page_indexed(page); if (exec) -- cgit v1.2.3-18-g5258 From 86dde15b3dc36dda4bbc32a8da607675ce63ef23 Mon Sep 17 00:00:00 2001 From: Sergei Shtylylov Date: Tue, 14 Mar 2006 07:20:00 +0300 Subject: [MIPS] Fix DBAu1550 software power off. Signed-off-by: Sergei Shtylyov Signed-off-by: Ralf Baechle --- arch/mips/au1000/common/reset.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/mips/au1000/common/reset.c b/arch/mips/au1000/common/reset.c index 4ffccedf596..96a211400f3 100644 --- a/arch/mips/au1000/common/reset.c +++ b/arch/mips/au1000/common/reset.c @@ -164,13 +164,13 @@ void au1000_restart(char *command) void au1000_halt(void) { -#if defined(CONFIG_MIPS_PB1550) +#if defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550) /* power off system */ - printk("\n** Powering off Pb1550\n"); + printk("\n** Powering off...\n"); au_writew(au_readw(0xAF00001C) | (3<<14), 0xAF00001C); au_sync(); while(1); /* should not get here */ -#endif +#else printk(KERN_NOTICE "\n** You can safely turn off the power\n"); #ifdef CONFIG_MIPS_MIRAGE au_writel((1 << 26) | (1 << 10), GPIO2_OUTPUT); @@ -187,6 +187,7 @@ void au1000_halt(void) "wait\n\t" ".set\tmips0"); #endif +#endif /* defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550) */ } void au1000_power_off(void) -- cgit v1.2.3-18-g5258 From 66a9a4ffda3474b193f36ed579cee06c597952f3 Mon Sep 17 00:00:00 2001 From: Matej Kupljen Date: Wed, 30 Nov 2005 10:20:01 +0100 Subject: [MIPS] Simple patch to power off DBAU1200 Signed-off-by: Matej Kupljen Signed-off-by: Ralf Baechle --- arch/mips/au1000/common/reset.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/mips/au1000/common/reset.c b/arch/mips/au1000/common/reset.c index 96a211400f3..c93af224c1b 100644 --- a/arch/mips/au1000/common/reset.c +++ b/arch/mips/au1000/common/reset.c @@ -175,6 +175,9 @@ void au1000_halt(void) #ifdef CONFIG_MIPS_MIRAGE au_writel((1 << 26) | (1 << 10), GPIO2_OUTPUT); #endif +#ifdef CONFIG_MIPS_DB1200 + au_writew(au_readw(0xB980001C) | (1<<14), 0xB980001C); +#endif #ifdef CONFIG_PM au_sleep(); -- cgit v1.2.3-18-g5258 From d6bd0e6b32ea72be91e5789b1e838c244f8a05d9 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 14 Mar 2006 23:46:58 +0000 Subject: [MIPS] Protect more of timer_interrupt() by xtime_lock. From Dave Johnson : * do_timer() expects the arch-specific handler to take the lock as it modifies jiffies[_64] and xtime. * writing timerhi/lo in timer_interrupt() will mess up fixed_rate_gettimeoffset() which reads timerhi/lo. Signed-off-by: Ralf Baechle --- arch/mips/kernel/time.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c index 42c94c771af..51273b7297a 100644 --- a/arch/mips/kernel/time.c +++ b/arch/mips/kernel/time.c @@ -424,6 +424,8 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) unsigned long j; unsigned int count; + write_seqlock(&xtime_lock); + count = mips_hpt_read(); mips_timer_ack(); @@ -441,7 +443,6 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) * CMOS clock accordingly every ~11 minutes. rtc_set_time() has to be * called as close as possible to 500 ms before the new second starts. */ - write_seqlock(&xtime_lock); if (ntp_synced() && xtime.tv_sec > last_rtc_update + 660 && (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && @@ -453,7 +454,6 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) last_rtc_update = xtime.tv_sec - 600; } } - write_sequnlock(&xtime_lock); /* * If jiffies has overflown in this timer_interrupt, we must @@ -496,6 +496,8 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) } } + write_sequnlock(&xtime_lock); + /* * In UP mode, we call local_timer_interrupt() to do profiling * and process accouting. -- cgit v1.2.3-18-g5258 From 4308cb16286c96d980570cc5319173b524220c06 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 14 Mar 2006 23:52:47 +0000 Subject: [MIPS] Sibyte: Fix interrupt timer off by one bug. From Dave Johnson : The timers need to be loaded with 1 less than the desired interval not the interval itself. Signed-off-by: Ralf Baechle --- arch/mips/sibyte/sb1250/time.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/sibyte/sb1250/time.c b/arch/mips/sibyte/sb1250/time.c index 511c89d65f3..adc0b5271a0 100644 --- a/arch/mips/sibyte/sb1250/time.c +++ b/arch/mips/sibyte/sb1250/time.c @@ -75,10 +75,10 @@ void sb1250_time_init(void) /* Disable the timer and set up the count */ __raw_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG))); #ifdef CONFIG_SIMULATION - __raw_writeq(50000 / HZ, + __raw_writeq((50000 / HZ) - 1, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT))); #else - __raw_writeq(1000000 / HZ, + __raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT))); #endif -- cgit v1.2.3-18-g5258 From a904f7478561464f9fe74929b81fec237b6ff4c3 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 15 Mar 2006 00:03:29 +0000 Subject: [MIPS] Sibyte: Fix race in sb1250_gettimeoffset(). From Dave Johnson : sb1250_gettimeoffset() simply reads the current cpu 0 timer remaining value, however once this counter reaches 0 and the interrupt is raised, it immediately resets and begins to count down again. If sb1250_gettimeoffset() is called on cpu 1 via do_gettimeofday() after the timer has reset but prior to cpu 0 processing the interrupt and taking write_seqlock() in timer_interrupt() it will return a full value (or close to it) causing time to jump backwards 1ms. Once cpu 0 handles the interrupt and timer_interrupt() gets far enough along it will jump forward 1ms. Fix this problem by implementing mips_hpt_*() on sb1250 using a spare timer unrelated to the existing periodic interrupt timers. It runs at 1Mhz with a full 23bit counter. This eliminated the custom do_gettimeoffset() for sb1250 and allowed use of the generic fixed_rate_gettimeoffset() using mips_hpt_*() and timerhi/timerlo. Signed-off-by: Ralf Baechle --- arch/mips/sibyte/sb1250/time.c | 73 ++++++++++++++++++++++++++++++++---------- arch/mips/sibyte/swarm/setup.c | 7 ++++ 2 files changed, 63 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/mips/sibyte/sb1250/time.c b/arch/mips/sibyte/sb1250/time.c index adc0b5271a0..1588f6debd9 100644 --- a/arch/mips/sibyte/sb1250/time.c +++ b/arch/mips/sibyte/sb1250/time.c @@ -47,23 +47,51 @@ #define IMR_IP3_VAL K_INT_MAP_I1 #define IMR_IP4_VAL K_INT_MAP_I2 +#define SB1250_HPT_NUM 3 +#define SB1250_HPT_VALUE M_SCD_TIMER_CNT /* max value */ +#define SB1250_HPT_SHIFT ((sizeof(unsigned int)*8)-V_SCD_TIMER_WIDTH) + + extern int sb1250_steal_irq(int irq); +static unsigned int sb1250_hpt_read(void); +static void sb1250_hpt_init(unsigned int); + +static unsigned int hpt_offset; + +void __init sb1250_hpt_setup(void) +{ + int cpu = smp_processor_id(); + + if (!cpu) { + /* Setup hpt using timer #3 but do not enable irq for it */ + __raw_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CFG))); + __raw_writeq(SB1250_HPT_VALUE, + IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_INIT))); + __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS, + IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CFG))); + + /* + * we need to fill 32 bits, so just use the upper 23 bits and pretend + * the timer is going 512Mhz instead of 1Mhz + */ + mips_hpt_frequency = V_SCD_TIMER_FREQ << SB1250_HPT_SHIFT; + mips_hpt_init = sb1250_hpt_init; + mips_hpt_read = sb1250_hpt_read; + } +} + + void sb1250_time_init(void) { int cpu = smp_processor_id(); int irq = K_INT_TIMER_0+cpu; - /* Only have 4 general purpose timers */ - if (cpu > 3) { + /* Only have 4 general purpose timers, and we use last one as hpt */ + if (cpu > 2) { BUG(); } - if (!cpu) { - /* Use our own gettimeoffset() routine */ - do_gettimeoffset = sb1250_gettimeoffset; - } - sb1250_mask_irq(cpu, irq); /* Map the timer interrupt to ip[4] of this cpu */ @@ -103,7 +131,7 @@ void sb1250_timer_interrupt(struct pt_regs *regs) int cpu = smp_processor_id(); int irq = K_INT_TIMER_0 + cpu; - /* Reset the timer */ + /* ACK interrupt */ ____raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG))); @@ -122,15 +150,26 @@ void sb1250_timer_interrupt(struct pt_regs *regs) } /* - * We use our own do_gettimeoffset() instead of the generic one, - * because the generic one does not work for SMP case. - * In addition, since we use general timer 0 for system time, - * we can get accurate intra-jiffy offset without calibration. + * The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over + * again. There's no easy way to set to a specific value so store init value + * in hpt_offset and subtract each time. + * + * Note: Timer isn't full 32bits so shift it into the upper part making + * it appear to run at a higher frequency. */ -unsigned long sb1250_gettimeoffset(void) +static unsigned int sb1250_hpt_read(void) { - unsigned long count = - __raw_readq(IOADDR(A_SCD_TIMER_REGISTER(0, R_SCD_TIMER_CNT))); + unsigned int count; - return 1000000/HZ - count; - } + count = G_SCD_TIMER_CNT(__raw_readq(IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CNT)))); + + count = (SB1250_HPT_VALUE - count) << SB1250_HPT_SHIFT; + + return count - hpt_offset; +} + +static void sb1250_hpt_init(unsigned int count) +{ + hpt_offset = count; + return; +} diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c index b614ca0ddb6..b661d2425a3 100644 --- a/arch/mips/sibyte/swarm/setup.c +++ b/arch/mips/sibyte/swarm/setup.c @@ -70,6 +70,12 @@ const char *get_system_type(void) return "SiByte " SIBYTE_BOARD_NAME; } +void __init swarm_time_init(void) +{ + /* Setup HPT */ + sb1250_hpt_setup(); +} + void __init swarm_timer_setup(struct irqaction *irq) { /* @@ -109,6 +115,7 @@ void __init plat_setup(void) panic_timeout = 5; /* For debug. */ + board_time_init = swarm_time_init; board_timer_setup = swarm_timer_setup; board_be_handler = swarm_be_handler; -- cgit v1.2.3-18-g5258 From 9007c9a2b03ea325ee593a161dbf01dbb8222d7e Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 18 Mar 2006 16:59:31 +0000 Subject: [MIPS] SB1: Check for -mno-sched-prolog if building corelis debug kernel. Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/Makefile b/arch/mips/Makefile index fe9da16f3a4..3d8dac681c6 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -108,7 +108,8 @@ MODFLAGS += -mlong-calls cflags-$(CONFIG_CPU_BIG_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' && echo -EB) cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL) -cflags-$(CONFIG_SB1XXX_CORELIS) += -mno-sched-prolog -fno-omit-frame-pointer +cflags-$(CONFIG_SB1XXX_CORELIS) += $(call cc-option,-mno-sched-prolog) \ + -fno-omit-frame-pointer # # Use: $(call set_gccflags,,,,,) -- cgit v1.2.3-18-g5258 From 94bbc1763b6b6d20d5cfa70c41cda23af27f8b55 Mon Sep 17 00:00:00 2001 From: Bernhard R Link Date: Fri, 10 Mar 2006 01:23:13 -0800 Subject: [SPARC64]: fix sparc_floppy_irq's auxio_register reseting The patch "[SPARC64]: Get rid of fast IRQ feature" moved the the code from arch/sparc64/kernel/entry.S: lduba [%g7] ASI_PHYS_BYPASS_EC_E, %g5 or %g5, AUXIO_AUX1_FTCNT, %g5 stba %g5, [%g7] ASI_PHYS_BYPASS_EC_E andn %g5, AUXIO_AUX1_FTCNT, %g5 stba %g5, [%g7] ASI_PHYS_BYPASS_EC_E to arch/sparc64/kernel/irq.c: val = readb(auxio_register); val |= AUXIO_AUX1_FTCNT; writeb(val, auxio_register); val &= AUXIO_AUX1_FTCNT; writeb(val, auxio_register); This looks like it it missing a bitwise not, which is reintroduced by this patch. Due to lack of a floppy device, I could not test it, but it looks evident. Signed-off-by: Bernhard R Link Signed-off-by: David S. Miller --- arch/sparc64/kernel/irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index 233526ba3ab..f7490ef629b 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -694,7 +694,7 @@ irqreturn_t sparc_floppy_irq(int irq, void *dev_cookie, struct pt_regs *regs) val = readb(auxio_register); val |= AUXIO_AUX1_FTCNT; writeb(val, auxio_register); - val &= AUXIO_AUX1_FTCNT; + val &= ~AUXIO_AUX1_FTCNT; writeb(val, auxio_register); doing_pdma = 0; -- cgit v1.2.3-18-g5258 From 30d4d1ffed7098afe2641536d67eef150499da02 Mon Sep 17 00:00:00 2001 From: Eric Sesterhenn Date: Fri, 10 Mar 2006 02:55:20 -0800 Subject: [SPARC]: BUG_ON() Conversion in arch/sparc/kernel/ioport.c this changes if() BUG(); constructs to BUG_ON() which is cleaner and can better optimized away Signed-off-by: Eric Sesterhenn Signed-off-by: David S. Miller --- arch/sparc/kernel/ioport.c | 40 +++++++++++++++------------------------- 1 file changed, 15 insertions(+), 25 deletions(-) (limited to 'arch') diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c index d39c9f20627..460f72e640e 100644 --- a/arch/sparc/kernel/ioport.c +++ b/arch/sparc/kernel/ioport.c @@ -217,7 +217,7 @@ static void _sparc_free_io(struct resource *res) unsigned long plen; plen = res->end - res->start + 1; - if ((plen & (PAGE_SIZE-1)) != 0) BUG(); + BUG_ON((plen & (PAGE_SIZE-1)) != 0); sparc_unmapiorange(res->start, plen); release_resource(res); } @@ -512,8 +512,7 @@ void pci_free_consistent(struct pci_dev *pdev, size_t n, void *p, dma_addr_t ba) dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr, size_t size, int direction) { - if (direction == PCI_DMA_NONE) - BUG(); + BUG_ON(direction == PCI_DMA_NONE); /* IIep is write-through, not flushing. */ return virt_to_phys(ptr); } @@ -528,8 +527,7 @@ dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr, size_t size, void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t ba, size_t size, int direction) { - if (direction == PCI_DMA_NONE) - BUG(); + BUG_ON(direction == PCI_DMA_NONE); if (direction != PCI_DMA_TODEVICE) { mmu_inval_dma_area((unsigned long)phys_to_virt(ba), (size + PAGE_SIZE-1) & PAGE_MASK); @@ -542,8 +540,7 @@ void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t ba, size_t size, dma_addr_t pci_map_page(struct pci_dev *hwdev, struct page *page, unsigned long offset, size_t size, int direction) { - if (direction == PCI_DMA_NONE) - BUG(); + BUG_ON(direction == PCI_DMA_NONE); /* IIep is write-through, not flushing. */ return page_to_phys(page) + offset; } @@ -551,8 +548,7 @@ dma_addr_t pci_map_page(struct pci_dev *hwdev, struct page *page, void pci_unmap_page(struct pci_dev *hwdev, dma_addr_t dma_address, size_t size, int direction) { - if (direction == PCI_DMA_NONE) - BUG(); + BUG_ON(direction == PCI_DMA_NONE); /* mmu_inval_dma_area XXX */ } @@ -576,11 +572,10 @@ int pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nents, { int n; - if (direction == PCI_DMA_NONE) - BUG(); + BUG_ON(direction == PCI_DMA_NONE); /* IIep is write-through, not flushing. */ for (n = 0; n < nents; n++) { - if (page_address(sg->page) == NULL) BUG(); + BUG_ON(page_address(sg->page) == NULL); sg->dvma_address = virt_to_phys(page_address(sg->page)); sg->dvma_length = sg->length; sg++; @@ -597,11 +592,10 @@ void pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nents, { int n; - if (direction == PCI_DMA_NONE) - BUG(); + BUG_ON(direction == PCI_DMA_NONE); if (direction != PCI_DMA_TODEVICE) { for (n = 0; n < nents; n++) { - if (page_address(sg->page) == NULL) BUG(); + BUG_ON(page_address(sg->page) == NULL); mmu_inval_dma_area( (unsigned long) page_address(sg->page), (sg->length + PAGE_SIZE-1) & PAGE_MASK); @@ -622,8 +616,7 @@ void pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nents, */ void pci_dma_sync_single_for_cpu(struct pci_dev *hwdev, dma_addr_t ba, size_t size, int direction) { - if (direction == PCI_DMA_NONE) - BUG(); + BUG_ON(direction == PCI_DMA_NONE); if (direction != PCI_DMA_TODEVICE) { mmu_inval_dma_area((unsigned long)phys_to_virt(ba), (size + PAGE_SIZE-1) & PAGE_MASK); @@ -632,8 +625,7 @@ void pci_dma_sync_single_for_cpu(struct pci_dev *hwdev, dma_addr_t ba, size_t si void pci_dma_sync_single_for_device(struct pci_dev *hwdev, dma_addr_t ba, size_t size, int direction) { - if (direction == PCI_DMA_NONE) - BUG(); + BUG_ON(direction == PCI_DMA_NONE); if (direction != PCI_DMA_TODEVICE) { mmu_inval_dma_area((unsigned long)phys_to_virt(ba), (size + PAGE_SIZE-1) & PAGE_MASK); @@ -650,11 +642,10 @@ void pci_dma_sync_sg_for_cpu(struct pci_dev *hwdev, struct scatterlist *sg, int { int n; - if (direction == PCI_DMA_NONE) - BUG(); + BUG_ON(direction == PCI_DMA_NONE); if (direction != PCI_DMA_TODEVICE) { for (n = 0; n < nents; n++) { - if (page_address(sg->page) == NULL) BUG(); + BUG_ON(page_address(sg->page) == NULL); mmu_inval_dma_area( (unsigned long) page_address(sg->page), (sg->length + PAGE_SIZE-1) & PAGE_MASK); @@ -667,11 +658,10 @@ void pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist *sg, i { int n; - if (direction == PCI_DMA_NONE) - BUG(); + BUG_ON(direction == PCI_DMA_NONE); if (direction != PCI_DMA_TODEVICE) { for (n = 0; n < nents; n++) { - if (page_address(sg->page) == NULL) BUG(); + BUG_ON(page_address(sg->page) == NULL); mmu_inval_dma_area( (unsigned long) page_address(sg->page), (sg->length + PAGE_SIZE-1) & PAGE_MASK); -- cgit v1.2.3-18-g5258 From 74bf4312fff083ab25c3f357cc653ada7995e5f6 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 31 Jan 2006 18:29:18 -0800 Subject: [SPARC64]: Move away from virtual page tables, part 1. We now use the TSB hardware assist features of the UltraSPARC MMUs. SMP is currently knowingly broken, we need to find another place to store the per-cpu base pointers. We hid them away in the TSB base register, and that obviously will not work any more :-) Another known broken case is non-8KB base page size. Also noticed that flush_tlb_all() is not referenced anywhere, only the internal __flush_tlb_all() (local cpu only) is used by the sparc64 port, so we can get rid of flush_tlb_all(). The kernel gets it's own 8KB TSB (swapper_tsb) and each address space gets it's own private 8K TSB. Later we can add code to dynamically increase the size of per-process TSB as the RSS grows. An 8KB TSB is good enough for up to about a 4MB RSS, after which the TSB starts to incur many capacity and conflict misses. We even accumulate OBP translations into the kernel TSB. Another area for refinement is large page size support. We could use a secondary address space TSB to handle those. Signed-off-by: David S. Miller --- arch/sparc64/kernel/Makefile | 2 +- arch/sparc64/kernel/binfmt_aout32.c | 13 +- arch/sparc64/kernel/dtlb_backend.S | 170 ----------------------- arch/sparc64/kernel/dtlb_base.S | 109 --------------- arch/sparc64/kernel/dtlb_miss.S | 39 ++++++ arch/sparc64/kernel/etrap.S | 2 + arch/sparc64/kernel/head.S | 46 +------ arch/sparc64/kernel/itlb_base.S | 79 ----------- arch/sparc64/kernel/itlb_miss.S | 39 ++++++ arch/sparc64/kernel/ktlb.S | 263 +++++++++++++++++------------------- arch/sparc64/kernel/process.c | 25 +--- arch/sparc64/kernel/rtrap.S | 6 +- arch/sparc64/kernel/smp.c | 12 +- arch/sparc64/kernel/trampoline.S | 33 ----- arch/sparc64/kernel/tsb.S | 169 +++++++++++++++++++++++ arch/sparc64/kernel/ttable.S | 6 +- arch/sparc64/kernel/vmlinux.lds.S | 3 + arch/sparc64/kernel/winfixup.S | 8 +- arch/sparc64/mm/Makefile | 2 +- arch/sparc64/mm/init.c | 91 +------------ arch/sparc64/mm/tlb.c | 61 +-------- arch/sparc64/mm/tsb.c | 84 ++++++++++++ arch/sparc64/mm/ultra.S | 58 -------- 23 files changed, 489 insertions(+), 831 deletions(-) delete mode 100644 arch/sparc64/kernel/dtlb_backend.S delete mode 100644 arch/sparc64/kernel/dtlb_base.S create mode 100644 arch/sparc64/kernel/dtlb_miss.S delete mode 100644 arch/sparc64/kernel/itlb_base.S create mode 100644 arch/sparc64/kernel/itlb_miss.S create mode 100644 arch/sparc64/kernel/tsb.S create mode 100644 arch/sparc64/mm/tsb.c (limited to 'arch') diff --git a/arch/sparc64/kernel/Makefile b/arch/sparc64/kernel/Makefile index 83d67eb1889..a482a9ffe5b 100644 --- a/arch/sparc64/kernel/Makefile +++ b/arch/sparc64/kernel/Makefile @@ -38,5 +38,5 @@ else CMODEL_CFLAG := -m64 -mcmodel=medlow endif -head.o: head.S ttable.S itlb_base.S dtlb_base.S dtlb_backend.S dtlb_prot.S \ +head.o: head.S ttable.S itlb_miss.S dtlb_miss.S ktlb.S tsb.S \ etrap.S rtrap.S winfixup.S entry.S diff --git a/arch/sparc64/kernel/binfmt_aout32.c b/arch/sparc64/kernel/binfmt_aout32.c index 202a80c24b6..a57d7f2b6f1 100644 --- a/arch/sparc64/kernel/binfmt_aout32.c +++ b/arch/sparc64/kernel/binfmt_aout32.c @@ -31,6 +31,7 @@ #include #include #include +#include static int load_aout32_binary(struct linux_binprm *, struct pt_regs * regs); static int load_aout32_library(struct file*); @@ -329,15 +330,9 @@ beyond_if: current->mm->start_stack = (unsigned long) create_aout32_tables((char __user *)bprm->p, bprm); - if (!(orig_thr_flags & _TIF_32BIT)) { - unsigned long pgd_cache = get_pgd_cache(current->mm->pgd); - - __asm__ __volatile__("stxa\t%0, [%1] %2\n\t" - "membar #Sync" - : /* no outputs */ - : "r" (pgd_cache), - "r" (TSB_REG), "i" (ASI_DMMU)); - } + tsb_context_switch(__pa(current->mm->pgd), + current->mm->context.sparc64_tsb); + start_thread32(regs, ex.a_entry, current->mm->start_stack); if (current->ptrace & PT_PTRACED) send_sig(SIGTRAP, current, 0); diff --git a/arch/sparc64/kernel/dtlb_backend.S b/arch/sparc64/kernel/dtlb_backend.S deleted file mode 100644 index acc889a7f9c..00000000000 --- a/arch/sparc64/kernel/dtlb_backend.S +++ /dev/null @@ -1,170 +0,0 @@ -/* $Id: dtlb_backend.S,v 1.16 2001/10/09 04:02:11 davem Exp $ - * dtlb_backend.S: Back end to DTLB miss replacement strategy. - * This is included directly into the trap table. - * - * Copyright (C) 1996,1998 David S. Miller (davem@redhat.com) - * Copyright (C) 1997,1998 Jakub Jelinek (jj@ultra.linux.cz) - */ - -#include -#include - -#define VALID_SZ_BITS (_PAGE_VALID | _PAGE_SZBITS) - -#define VPTE_BITS (_PAGE_CP | _PAGE_CV | _PAGE_P ) -#define VPTE_SHIFT (PAGE_SHIFT - 3) - -/* Ways we can get here: - * - * 1) Nucleus loads and stores to/from PA-->VA direct mappings at tl>1. - * 2) Nucleus loads and stores to/from user/kernel window save areas. - * 3) VPTE misses from dtlb_base and itlb_base. - * - * We need to extract out the PMD and PGDIR indexes from the - * linear virtual page table access address. The PTE index - * is at the bottom, but we are not concerned with it. Bits - * 0 to 2 are clear since each PTE is 8 bytes in size. Each - * PMD and PGDIR entry are 4 bytes in size. Thus, this - * address looks something like: - * - * |---------------------------------------------------------------| - * | ... | PGDIR index | PMD index | PTE index | | - * |---------------------------------------------------------------| - * 63 F E D C B A 3 2 0 <- bit nr - * - * The variable bits above are defined as: - * A --> 3 + (PAGE_SHIFT - log2(8)) - * --> 3 + (PAGE_SHIFT - 3) - 1 - * (ie. this is "bit 3" + PAGE_SIZE - size of PTE entry in bits - 1) - * B --> A + 1 - * C --> B + (PAGE_SHIFT - log2(4)) - * --> B + (PAGE_SHIFT - 2) - 1 - * (ie. this is "bit B" + PAGE_SIZE - size of PMD entry in bits - 1) - * D --> C + 1 - * E --> D + (PAGE_SHIFT - log2(4)) - * --> D + (PAGE_SHIFT - 2) - 1 - * (ie. this is "bit D" + PAGE_SIZE - size of PGDIR entry in bits - 1) - * F --> E + 1 - * - * (Note how "B" always evalutes to PAGE_SHIFT, all the other constants - * cancel out.) - * - * For 8K PAGE_SIZE (thus, PAGE_SHIFT of 13) the bit numbers are: - * A --> 12 - * B --> 13 - * C --> 23 - * D --> 24 - * E --> 34 - * F --> 35 - * - * For 64K PAGE_SIZE (thus, PAGE_SHIFT of 16) the bit numbers are: - * A --> 15 - * B --> 16 - * C --> 29 - * D --> 30 - * E --> 43 - * F --> 44 - * - * Because bits both above and below each PGDIR and PMD index need to - * be masked out, and the index can be as long as 14 bits (when using a - * 64K PAGE_SIZE, and thus a PAGE_SHIFT of 16), we need 3 instructions - * to extract each index out. - * - * Shifts do not pair very well on UltraSPARC-I, II, IIi, and IIe, so - * we try to avoid using them for the entire operation. We could setup - * a mask anywhere from bit 31 down to bit 10 using the sethi instruction. - * - * We need a mask covering bits B --> C and one covering D --> E. - * For 8K PAGE_SIZE these masks are 0x00ffe000 and 0x7ff000000. - * For 64K PAGE_SIZE these masks are 0x3fff0000 and 0xfffc0000000. - * The second in each set cannot be loaded with a single sethi - * instruction, because the upper bits are past bit 32. We would - * need to use a sethi + a shift. - * - * For the time being, we use 2 shifts and a simple "and" mask. - * We shift left to clear the bits above the index, we shift down - * to clear the bits below the index (sans the log2(4 or 8) bits) - * and a mask to clear the log2(4 or 8) bits. We need therefore - * define 4 shift counts, all of which are relative to PAGE_SHIFT. - * - * Although unsupportable for other reasons, this does mean that - * 512K and 4MB page sizes would be generaally supported by the - * kernel. (ELF binaries would break with > 64K PAGE_SIZE since - * the sections are only aligned that strongly). - * - * The operations performed for extraction are thus: - * - * ((X << FOO_SHIFT_LEFT) >> FOO_SHIFT_RIGHT) & ~0x3 - * - */ - -#define A (3 + (PAGE_SHIFT - 3) - 1) -#define B (A + 1) -#define C (B + (PAGE_SHIFT - 2) - 1) -#define D (C + 1) -#define E (D + (PAGE_SHIFT - 2) - 1) -#define F (E + 1) - -#define PMD_SHIFT_LEFT (64 - D) -#define PMD_SHIFT_RIGHT (64 - (D - B) - 2) -#define PGDIR_SHIFT_LEFT (64 - F) -#define PGDIR_SHIFT_RIGHT (64 - (F - D) - 2) -#define LOW_MASK_BITS 0x3 - -/* TLB1 ** ICACHE line 1: tl1 DTLB and quick VPTE miss */ - ldxa [%g1 + %g1] ASI_DMMU, %g4 ! Get TAG_ACCESS - add %g3, %g3, %g5 ! Compute VPTE base - cmp %g4, %g5 ! VPTE miss? - bgeu,pt %xcc, 1f ! Continue here - andcc %g4, TAG_CONTEXT_BITS, %g5 ! tl0 miss Nucleus test - ba,a,pt %xcc, from_tl1_trap ! Fall to tl0 miss -1: sllx %g6, VPTE_SHIFT, %g4 ! Position TAG_ACCESS - or %g4, %g5, %g4 ! Prepare TAG_ACCESS - -/* TLB1 ** ICACHE line 2: Quick VPTE miss */ - mov TSB_REG, %g1 ! Grab TSB reg - ldxa [%g1] ASI_DMMU, %g5 ! Doing PGD caching? - sllx %g6, PMD_SHIFT_LEFT, %g1 ! Position PMD offset - be,pn %xcc, sparc64_vpte_nucleus ! Is it from Nucleus? - srlx %g1, PMD_SHIFT_RIGHT, %g1 ! Mask PMD offset bits - brnz,pt %g5, sparc64_vpte_continue ! Yep, go like smoke - andn %g1, LOW_MASK_BITS, %g1 ! Final PMD mask - sllx %g6, PGDIR_SHIFT_LEFT, %g5 ! Position PGD offset - -/* TLB1 ** ICACHE line 3: Quick VPTE miss */ - srlx %g5, PGDIR_SHIFT_RIGHT, %g5 ! Mask PGD offset bits - andn %g5, LOW_MASK_BITS, %g5 ! Final PGD mask - lduwa [%g7 + %g5] ASI_PHYS_USE_EC, %g5! Load PGD - brz,pn %g5, vpte_noent ! Valid? -sparc64_kpte_continue: - sllx %g5, 11, %g5 ! Shift into place -sparc64_vpte_continue: - lduwa [%g5 + %g1] ASI_PHYS_USE_EC, %g5! Load PMD - sllx %g5, 11, %g5 ! Shift into place - brz,pn %g5, vpte_noent ! Valid? - -/* TLB1 ** ICACHE line 4: Quick VPTE miss */ - mov (VALID_SZ_BITS >> 61), %g1 ! upper vpte into %g1 - sllx %g1, 61, %g1 ! finish calc - or %g5, VPTE_BITS, %g5 ! Prepare VPTE data - or %g5, %g1, %g5 ! ... - mov TLB_SFSR, %g1 ! Restore %g1 value - stxa %g5, [%g0] ASI_DTLB_DATA_IN ! Load VPTE into TLB - stxa %g4, [%g1 + %g1] ASI_DMMU ! Restore previous TAG_ACCESS - retry ! Load PTE once again - -#undef VALID_SZ_BITS -#undef VPTE_SHIFT -#undef VPTE_BITS -#undef A -#undef B -#undef C -#undef D -#undef E -#undef F -#undef PMD_SHIFT_LEFT -#undef PMD_SHIFT_RIGHT -#undef PGDIR_SHIFT_LEFT -#undef PGDIR_SHIFT_RIGHT -#undef LOW_MASK_BITS - diff --git a/arch/sparc64/kernel/dtlb_base.S b/arch/sparc64/kernel/dtlb_base.S deleted file mode 100644 index 6528786840c..00000000000 --- a/arch/sparc64/kernel/dtlb_base.S +++ /dev/null @@ -1,109 +0,0 @@ -/* $Id: dtlb_base.S,v 1.17 2001/10/11 22:33:52 davem Exp $ - * dtlb_base.S: Front end to DTLB miss replacement strategy. - * This is included directly into the trap table. - * - * Copyright (C) 1996,1998 David S. Miller (davem@redhat.com) - * Copyright (C) 1997,1998 Jakub Jelinek (jj@ultra.linux.cz) - */ - -#include -#include - -/* %g1 TLB_SFSR (%g1 + %g1 == TLB_TAG_ACCESS) - * %g2 (KERN_HIGHBITS | KERN_LOWBITS) - * %g3 VPTE base (0xfffffffe00000000) Spitfire/Blackbird (44-bit VA space) - * (0xffe0000000000000) Cheetah (64-bit VA space) - * %g7 __pa(current->mm->pgd) - * - * The VPTE base value is completely magic, but note that - * few places in the kernel other than these TLB miss - * handlers know anything about the VPTE mechanism or - * how it works (see VPTE_SIZE, TASK_SIZE and PTRS_PER_PGD). - * Consider the 44-bit VADDR Ultra-I/II case as an example: - * - * VA[0 : (1<<43)] produce VPTE index [%g3 : 0] - * VA[0 : -(1<<43)] produce VPTE index [%g3-(1<<(43-PAGE_SHIFT+3)) : %g3] - * - * For Cheetah's 64-bit VADDR space this is: - * - * VA[0 : (1<<63)] produce VPTE index [%g3 : 0] - * VA[0 : -(1<<63)] produce VPTE index [%g3-(1<<(63-PAGE_SHIFT+3)) : %g3] - * - * If you're paying attention you'll notice that this means half of - * the VPTE table is above %g3 and half is below, low VA addresses - * map progressively upwards from %g3, and high VA addresses map - * progressively upwards towards %g3. This trick was needed to make - * the same 8 instruction handler work both for Spitfire/Blackbird's - * peculiar VA space hole configuration and the full 64-bit VA space - * one of Cheetah at the same time. - */ - -/* Ways we can get here: - * - * 1) Nucleus loads and stores to/from PA-->VA direct mappings. - * 2) Nucleus loads and stores to/from vmalloc() areas. - * 3) User loads and stores. - * 4) User space accesses by nucleus at tl0 - */ - -#if PAGE_SHIFT == 13 -/* - * To compute vpte offset, we need to do ((addr >> 13) << 3), - * which can be optimized to (addr >> 10) if bits 10/11/12 can - * be guaranteed to be 0 ... mmu_context.h does guarantee this - * by only using 10 bits in the hwcontext value. - */ -#define CREATE_VPTE_OFFSET1(r1, r2) nop -#define CREATE_VPTE_OFFSET2(r1, r2) \ - srax r1, 10, r2 -#else -#define CREATE_VPTE_OFFSET1(r1, r2) \ - srax r1, PAGE_SHIFT, r2 -#define CREATE_VPTE_OFFSET2(r1, r2) \ - sllx r2, 3, r2 -#endif - -/* DTLB ** ICACHE line 1: Quick user TLB misses */ - mov TLB_SFSR, %g1 - ldxa [%g1 + %g1] ASI_DMMU, %g4 ! Get TAG_ACCESS - andcc %g4, TAG_CONTEXT_BITS, %g0 ! From Nucleus? -from_tl1_trap: - rdpr %tl, %g5 ! For TL==3 test - CREATE_VPTE_OFFSET1(%g4, %g6) ! Create VPTE offset - be,pn %xcc, kvmap ! Yep, special processing - CREATE_VPTE_OFFSET2(%g4, %g6) ! Create VPTE offset - cmp %g5, 4 ! Last trap level? - -/* DTLB ** ICACHE line 2: User finish + quick kernel TLB misses */ - be,pn %xcc, longpath ! Yep, cannot risk VPTE miss - nop ! delay slot - ldxa [%g3 + %g6] ASI_S, %g5 ! Load VPTE -1: brgez,pn %g5, longpath ! Invalid, branch out - nop ! Delay-slot -9: stxa %g5, [%g0] ASI_DTLB_DATA_IN ! Reload TLB - retry ! Trap return - nop - -/* DTLB ** ICACHE line 3: winfixups+real_faults */ -longpath: - rdpr %pstate, %g5 ! Move into alternate globals - wrpr %g5, PSTATE_AG|PSTATE_MG, %pstate - rdpr %tl, %g4 ! See where we came from. - cmp %g4, 1 ! Is etrap/rtrap window fault? - mov TLB_TAG_ACCESS, %g4 ! Prepare for fault processing - ldxa [%g4] ASI_DMMU, %g5 ! Load faulting VA page - be,pt %xcc, sparc64_realfault_common ! Jump to normal fault handling - mov FAULT_CODE_DTLB, %g4 ! It was read from DTLB - -/* DTLB ** ICACHE line 4: Unused... */ - ba,a,pt %xcc, winfix_trampoline ! Call window fixup code - nop - nop - nop - nop - nop - nop - nop - -#undef CREATE_VPTE_OFFSET1 -#undef CREATE_VPTE_OFFSET2 diff --git a/arch/sparc64/kernel/dtlb_miss.S b/arch/sparc64/kernel/dtlb_miss.S new file mode 100644 index 00000000000..d0f1565cb56 --- /dev/null +++ b/arch/sparc64/kernel/dtlb_miss.S @@ -0,0 +1,39 @@ +/* DTLB ** ICACHE line 1: Context 0 check and TSB load */ + ldxa [%g0] ASI_DMMU_TSB_8KB_PTR, %g1 ! Get TSB 8K pointer + ldxa [%g0] ASI_DMMU, %g6 ! Get TAG TARGET + srlx %g6, 48, %g5 ! Get context + brz,pn %g5, kvmap_dtlb ! Context 0 processing + nop ! Delay slot (fill me) + ldda [%g1] ASI_NUCLEUS_QUAD_LDD, %g4 ! Load TSB entry + nop ! Push branch to next I$ line + cmp %g4, %g6 ! Compare TAG + +/* DTLB ** ICACHE line 2: TSB compare and TLB load */ + bne,pn %xcc, tsb_miss_dtlb ! Miss + mov FAULT_CODE_DTLB, %g3 + stxa %g5, [%g0] ASI_DTLB_DATA_IN ! Load TLB + retry ! Trap done + nop + nop + nop + nop + +/* DTLB ** ICACHE line 3: */ + nop + nop + nop + nop + nop + nop + nop + nop + +/* DTLB ** ICACHE line 4: */ + nop + nop + nop + nop + nop + nop + nop + nop diff --git a/arch/sparc64/kernel/etrap.S b/arch/sparc64/kernel/etrap.S index 0d8eba21111..567dbb765c3 100644 --- a/arch/sparc64/kernel/etrap.S +++ b/arch/sparc64/kernel/etrap.S @@ -99,6 +99,7 @@ etrap_irq: wrpr %g0, ETRAP_PSTATE2, %pstate mov %l6, %g6 #ifdef CONFIG_SMP +#error IMMU TSB usage must be fixed mov TSB_REG, %g3 ldxa [%g3] ASI_IMMU, %g5 #endif @@ -248,6 +249,7 @@ scetrap: rdpr %pil, %g2 mov %l6, %g6 stx %i7, [%sp + PTREGS_OFF + PT_V9_I7] #ifdef CONFIG_SMP +#error IMMU TSB usage must be fixed mov TSB_REG, %g3 ldxa [%g3] ASI_IMMU, %g5 #endif diff --git a/arch/sparc64/kernel/head.S b/arch/sparc64/kernel/head.S index b49dcd4504b..d00e20693be 100644 --- a/arch/sparc64/kernel/head.S +++ b/arch/sparc64/kernel/head.S @@ -429,17 +429,6 @@ setup_trap_table: * * %g6 --> current_thread_info() * - * MMU Globals (PSTATE_MG): - * - * %g1 --> TLB_SFSR - * %g2 --> ((_PAGE_VALID | _PAGE_SZ4MB | - * _PAGE_CP | _PAGE_CV | _PAGE_P | _PAGE_W) - * ^ 0xfffff80000000000) - * (this %g2 value is used for computing the PAGE_OFFSET kernel - * TLB entries quickly, the virtual address of the fault XOR'd - * with this %g2 value is the PTE to load into the TLB) - * %g3 --> VPTE_BASE_CHEETAH or VPTE_BASE_SPITFIRE - * * Interrupt Globals (PSTATE_IG, setup by init_irqwork_curcpu()): * * %g6 --> __irq_work[smp_processor_id()] @@ -450,40 +439,6 @@ setup_trap_table: wrpr %o1, PSTATE_AG, %pstate mov %o2, %g6 -#define KERN_HIGHBITS ((_PAGE_VALID|_PAGE_SZ4MB)^0xfffff80000000000) -#define KERN_LOWBITS (_PAGE_CP | _PAGE_CV | _PAGE_P | _PAGE_W) - wrpr %o1, PSTATE_MG, %pstate - mov TSB_REG, %g1 - stxa %g0, [%g1] ASI_DMMU - membar #Sync - stxa %g0, [%g1] ASI_IMMU - membar #Sync - mov TLB_SFSR, %g1 - sethi %uhi(KERN_HIGHBITS), %g2 - or %g2, %ulo(KERN_HIGHBITS), %g2 - sllx %g2, 32, %g2 - or %g2, KERN_LOWBITS, %g2 - - BRANCH_IF_ANY_CHEETAH(g3,g7,8f) - ba,pt %xcc, 9f - nop - -8: - sethi %uhi(VPTE_BASE_CHEETAH), %g3 - or %g3, %ulo(VPTE_BASE_CHEETAH), %g3 - ba,pt %xcc, 2f - sllx %g3, 32, %g3 - -9: - sethi %uhi(VPTE_BASE_SPITFIRE), %g3 - or %g3, %ulo(VPTE_BASE_SPITFIRE), %g3 - sllx %g3, 32, %g3 - -2: - clr %g7 -#undef KERN_HIGHBITS -#undef KERN_LOWBITS - /* Kill PROM timer */ sethi %hi(0x80000000), %o2 sllx %o2, 32, %o2 @@ -538,6 +493,7 @@ sparc64_boot_end: #include "systbls.S" #include "ktlb.S" +#include "tsb.S" #include "etrap.S" #include "rtrap.S" #include "winfixup.S" diff --git a/arch/sparc64/kernel/itlb_base.S b/arch/sparc64/kernel/itlb_base.S deleted file mode 100644 index 4951ff8f687..00000000000 --- a/arch/sparc64/kernel/itlb_base.S +++ /dev/null @@ -1,79 +0,0 @@ -/* $Id: itlb_base.S,v 1.12 2002/02/09 19:49:30 davem Exp $ - * itlb_base.S: Front end to ITLB miss replacement strategy. - * This is included directly into the trap table. - * - * Copyright (C) 1996,1998 David S. Miller (davem@redhat.com) - * Copyright (C) 1997,1998 Jakub Jelinek (jj@ultra.linux.cz) - */ - -#if PAGE_SHIFT == 13 -/* - * To compute vpte offset, we need to do ((addr >> 13) << 3), - * which can be optimized to (addr >> 10) if bits 10/11/12 can - * be guaranteed to be 0 ... mmu_context.h does guarantee this - * by only using 10 bits in the hwcontext value. - */ -#define CREATE_VPTE_OFFSET1(r1, r2) \ - srax r1, 10, r2 -#define CREATE_VPTE_OFFSET2(r1, r2) nop -#else /* PAGE_SHIFT */ -#define CREATE_VPTE_OFFSET1(r1, r2) \ - srax r1, PAGE_SHIFT, r2 -#define CREATE_VPTE_OFFSET2(r1, r2) \ - sllx r2, 3, r2 -#endif /* PAGE_SHIFT */ - - -/* Ways we can get here: - * - * 1) Nucleus instruction misses from module code. - * 2) All user instruction misses. - * - * All real page faults merge their code paths to the - * sparc64_realfault_common label below. - */ - -/* ITLB ** ICACHE line 1: Quick user TLB misses */ - mov TLB_SFSR, %g1 - ldxa [%g1 + %g1] ASI_IMMU, %g4 ! Get TAG_ACCESS - CREATE_VPTE_OFFSET1(%g4, %g6) ! Create VPTE offset - CREATE_VPTE_OFFSET2(%g4, %g6) ! Create VPTE offset - ldxa [%g3 + %g6] ASI_P, %g5 ! Load VPTE -1: brgez,pn %g5, 3f ! Not valid, branch out - sethi %hi(_PAGE_EXEC), %g4 ! Delay-slot - andcc %g5, %g4, %g0 ! Executable? - -/* ITLB ** ICACHE line 2: Real faults */ - be,pn %xcc, 3f ! Nope, branch. - nop ! Delay-slot -2: stxa %g5, [%g0] ASI_ITLB_DATA_IN ! Load PTE into TLB - retry ! Trap return -3: rdpr %pstate, %g4 ! Move into alt-globals - wrpr %g4, PSTATE_AG|PSTATE_MG, %pstate - rdpr %tpc, %g5 ! And load faulting VA - mov FAULT_CODE_ITLB, %g4 ! It was read from ITLB - -/* ITLB ** ICACHE line 3: Finish faults */ -sparc64_realfault_common: ! Called by dtlb_miss - stb %g4, [%g6 + TI_FAULT_CODE] - stx %g5, [%g6 + TI_FAULT_ADDR] - ba,pt %xcc, etrap ! Save state -1: rd %pc, %g7 ! ... - call do_sparc64_fault ! Call fault handler - add %sp, PTREGS_OFF, %o0! Compute pt_regs arg - ba,pt %xcc, rtrap_clr_l6 ! Restore cpu state - nop - -/* ITLB ** ICACHE line 4: Window fixups */ -winfix_trampoline: - rdpr %tpc, %g3 ! Prepare winfixup TNPC - or %g3, 0x7c, %g3 ! Compute branch offset - wrpr %g3, %tnpc ! Write it into TNPC - done ! Do it to it - nop - nop - nop - nop - -#undef CREATE_VPTE_OFFSET1 -#undef CREATE_VPTE_OFFSET2 diff --git a/arch/sparc64/kernel/itlb_miss.S b/arch/sparc64/kernel/itlb_miss.S new file mode 100644 index 00000000000..6b6c8fee04b --- /dev/null +++ b/arch/sparc64/kernel/itlb_miss.S @@ -0,0 +1,39 @@ +/* ITLB ** ICACHE line 1: Context 0 check and TSB load */ + ldxa [%g0] ASI_IMMU_TSB_8KB_PTR, %g1 ! Get TSB 8K pointer + ldxa [%g0] ASI_IMMU, %g6 ! Get TAG TARGET + srlx %g6, 48, %g5 ! Get context + brz,pn %g5, kvmap_itlb ! Context 0 processing + nop ! Delay slot (fill me) + ldda [%g1] ASI_NUCLEUS_QUAD_LDD, %g4 ! Load TSB entry + cmp %g4, %g6 ! Compare TAG + sethi %hi(_PAGE_EXEC), %g4 ! Setup exec check + +/* ITLB ** ICACHE line 2: TSB compare and TLB load */ + bne,pn %xcc, tsb_miss_itlb ! Miss + mov FAULT_CODE_ITLB, %g3 + andcc %g5, %g4, %g0 ! Executable? + be,pn %xcc, tsb_do_fault + nop ! Delay slot, fill me + stxa %g5, [%g0] ASI_ITLB_DATA_IN ! Load TLB + retry ! Trap done + nop + +/* ITLB ** ICACHE line 3: */ + nop + nop + nop + nop + nop + nop + nop + nop + +/* ITLB ** ICACHE line 4: */ + nop + nop + nop + nop + nop + nop + nop + nop diff --git a/arch/sparc64/kernel/ktlb.S b/arch/sparc64/kernel/ktlb.S index d9244d3c9f7..2b5e71b6888 100644 --- a/arch/sparc64/kernel/ktlb.S +++ b/arch/sparc64/kernel/ktlb.S @@ -4,191 +4,170 @@ * Copyright (C) 1996 Eddie C. Dost (ecd@brainaid.de) * Copyright (C) 1996 Miguel de Icaza (miguel@nuclecu.unam.mx) * Copyright (C) 1996,98,99 Jakub Jelinek (jj@sunsite.mff.cuni.cz) -*/ + */ #include #include #include #include #include +#include .text .align 32 -/* - * On a second level vpte miss, check whether the original fault is to the OBP - * range (note that this is only possible for instruction miss, data misses to - * obp range do not use vpte). If so, go back directly to the faulting address. - * This is because we want to read the tpc, otherwise we have no way of knowing - * the 8k aligned faulting address if we are using >8k kernel pagesize. This - * also ensures no vpte range addresses are dropped into tlb while obp is - * executing (see inherit_locked_prom_mappings() rant). - */ -sparc64_vpte_nucleus: - /* Note that kvmap below has verified that the address is - * in the range MODULES_VADDR --> VMALLOC_END already. So - * here we need only check if it is an OBP address or not. - */ + .globl kvmap_itlb +kvmap_itlb: + /* g6: TAG TARGET */ + mov TLB_TAG_ACCESS, %g4 + ldxa [%g4] ASI_IMMU, %g4 + +kvmap_itlb_nonlinear: + /* Catch kernel NULL pointer calls. */ + sethi %hi(PAGE_SIZE), %g5 + cmp %g4, %g5 + bleu,pn %xcc, kvmap_dtlb_longpath + nop + + KERN_TSB_LOOKUP_TL1(%g4, %g6, %g5, %g1, %g2, %g3, kvmap_itlb_load) + +kvmap_itlb_tsb_miss: sethi %hi(LOW_OBP_ADDRESS), %g5 cmp %g4, %g5 - blu,pn %xcc, kern_vpte + blu,pn %xcc, kvmap_itlb_vmalloc_addr mov 0x1, %g5 sllx %g5, 32, %g5 cmp %g4, %g5 - blu,pn %xcc, vpte_insn_obp + blu,pn %xcc, kvmap_itlb_obp nop - /* These two instructions are patched by paginig_init(). */ -kern_vpte: - sethi %hi(swapper_pgd_zero), %g5 - lduw [%g5 + %lo(swapper_pgd_zero)], %g5 - - /* With kernel PGD in %g5, branch back into dtlb_backend. */ - ba,pt %xcc, sparc64_kpte_continue - andn %g1, 0x3, %g1 /* Finish PMD offset adjustment. */ - -vpte_noent: - /* Restore previous TAG_ACCESS, %g5 is zero, and we will - * skip over the trap instruction so that the top level - * TLB miss handler will thing this %g5 value is just an - * invalid PTE, thus branching to full fault processing. - */ - mov TLB_SFSR, %g1 - stxa %g4, [%g1 + %g1] ASI_DMMU - done - -vpte_insn_obp: - /* Behave as if we are at TL0. */ - wrpr %g0, 1, %tl - rdpr %tpc, %g4 /* Find original faulting iaddr */ - srlx %g4, 13, %g4 /* Throw out context bits */ - sllx %g4, 13, %g4 /* g4 has vpn + ctx0 now */ - - /* Restore previous TAG_ACCESS. */ - mov TLB_SFSR, %g1 - stxa %g4, [%g1 + %g1] ASI_IMMU - - sethi %hi(prom_trans), %g5 - or %g5, %lo(prom_trans), %g5 - -1: ldx [%g5 + 0x00], %g6 ! base - brz,a,pn %g6, longpath ! no more entries, fail - mov TLB_SFSR, %g1 ! and restore %g1 - ldx [%g5 + 0x08], %g1 ! len - add %g6, %g1, %g1 ! end - cmp %g6, %g4 - bgu,pt %xcc, 2f - cmp %g4, %g1 - bgeu,pt %xcc, 2f - ldx [%g5 + 0x10], %g1 ! PTE - - /* TLB load, restore %g1, and return from trap. */ - sub %g4, %g6, %g6 - add %g1, %g6, %g5 - mov TLB_SFSR, %g1 - stxa %g5, [%g0] ASI_ITLB_DATA_IN - retry +kvmap_itlb_vmalloc_addr: + KERN_PGTABLE_WALK(%g4, %g5, %g2, kvmap_itlb_longpath) + + TSB_LOCK_TAG(%g1, %g2, %g4) + + /* Load and check PTE. */ + ldxa [%g5] ASI_PHYS_USE_EC, %g5 + brgez,a,pn %g5, kvmap_itlb_longpath + stx %g0, [%g1] -2: ba,pt %xcc, 1b - add %g5, (3 * 8), %g5 ! next entry - -kvmap_do_obp: - sethi %hi(prom_trans), %g5 - or %g5, %lo(prom_trans), %g5 - srlx %g4, 13, %g4 - sllx %g4, 13, %g4 - -1: ldx [%g5 + 0x00], %g6 ! base - brz,a,pn %g6, longpath ! no more entries, fail - mov TLB_SFSR, %g1 ! and restore %g1 - ldx [%g5 + 0x08], %g1 ! len - add %g6, %g1, %g1 ! end - cmp %g6, %g4 - bgu,pt %xcc, 2f - cmp %g4, %g1 - bgeu,pt %xcc, 2f - ldx [%g5 + 0x10], %g1 ! PTE - - /* TLB load, restore %g1, and return from trap. */ - sub %g4, %g6, %g6 - add %g1, %g6, %g5 - mov TLB_SFSR, %g1 - stxa %g5, [%g0] ASI_DTLB_DATA_IN + TSB_WRITE(%g1, %g5, %g6) + + /* fallthrough to TLB load */ + +kvmap_itlb_load: + stxa %g5, [%g0] ASI_ITLB_DATA_IN ! Reload TLB retry -2: ba,pt %xcc, 1b - add %g5, (3 * 8), %g5 ! next entry +kvmap_itlb_longpath: + rdpr %pstate, %g5 + wrpr %g5, PSTATE_AG | PSTATE_MG, %pstate + rdpr %tpc, %g5 + ba,pt %xcc, sparc64_realfault_common + mov FAULT_CODE_ITLB, %g4 + +kvmap_itlb_obp: + OBP_TRANS_LOOKUP(%g4, %g5, %g2, %g3, kvmap_itlb_longpath) + + TSB_LOCK_TAG(%g1, %g2, %g4) + + TSB_WRITE(%g1, %g5, %g6) + + ba,pt %xcc, kvmap_itlb_load + nop + +kvmap_dtlb_obp: + OBP_TRANS_LOOKUP(%g4, %g5, %g2, %g3, kvmap_dtlb_longpath) + + TSB_LOCK_TAG(%g1, %g2, %g4) + + TSB_WRITE(%g1, %g5, %g6) + + ba,pt %xcc, kvmap_dtlb_load + nop -/* - * On a first level data miss, check whether this is to the OBP range (note - * that such accesses can be made by prom, as well as by kernel using - * prom_getproperty on "address"), and if so, do not use vpte access ... - * rather, use information saved during inherit_prom_mappings() using 8k - * pagesize. - */ .align 32 -kvmap: - brgez,pn %g4, kvmap_nonlinear + .globl kvmap_dtlb +kvmap_dtlb: + /* %g6: TAG TARGET */ + mov TLB_TAG_ACCESS, %g4 + ldxa [%g4] ASI_DMMU, %g4 + brgez,pn %g4, kvmap_dtlb_nonlinear nop -#ifdef CONFIG_DEBUG_PAGEALLOC +#define KERN_HIGHBITS ((_PAGE_VALID|_PAGE_SZ4MB)^0xfffff80000000000) +#define KERN_LOWBITS (_PAGE_CP | _PAGE_CV | _PAGE_P | _PAGE_W) + + sethi %uhi(KERN_HIGHBITS), %g2 + or %g2, %ulo(KERN_HIGHBITS), %g2 + sllx %g2, 32, %g2 + or %g2, KERN_LOWBITS, %g2 + +#undef KERN_HIGHBITS +#undef KERN_LOWBITS + .globl kvmap_linear_patch kvmap_linear_patch: -#endif - ba,pt %xcc, kvmap_load + ba,pt %xcc, kvmap_dtlb_load xor %g2, %g4, %g5 -#ifdef CONFIG_DEBUG_PAGEALLOC - sethi %hi(swapper_pg_dir), %g5 - or %g5, %lo(swapper_pg_dir), %g5 - sllx %g4, 64 - (PGDIR_SHIFT + PGDIR_BITS), %g6 - srlx %g6, 64 - PAGE_SHIFT, %g6 - andn %g6, 0x3, %g6 - lduw [%g5 + %g6], %g5 - brz,pn %g5, longpath - sllx %g4, 64 - (PMD_SHIFT + PMD_BITS), %g6 - srlx %g6, 64 - PAGE_SHIFT, %g6 - sllx %g5, 11, %g5 - andn %g6, 0x3, %g6 - lduwa [%g5 + %g6] ASI_PHYS_USE_EC, %g5 - brz,pn %g5, longpath - sllx %g4, 64 - PMD_SHIFT, %g6 - srlx %g6, 64 - PAGE_SHIFT, %g6 - sllx %g5, 11, %g5 - andn %g6, 0x7, %g6 - ldxa [%g5 + %g6] ASI_PHYS_USE_EC, %g5 - brz,pn %g5, longpath +kvmap_dtlb_vmalloc_addr: + KERN_PGTABLE_WALK(%g4, %g5, %g2, kvmap_dtlb_longpath) + + TSB_LOCK_TAG(%g1, %g2, %g4) + + /* Load and check PTE. */ + ldxa [%g5] ASI_PHYS_USE_EC, %g5 + brgez,a,pn %g5, kvmap_dtlb_longpath + stx %g0, [%g1] + + TSB_WRITE(%g1, %g5, %g6) + + /* fallthrough to TLB load */ + +kvmap_dtlb_load: + stxa %g5, [%g0] ASI_DTLB_DATA_IN ! Reload TLB + retry + +kvmap_dtlb_nonlinear: + /* Catch kernel NULL pointer derefs. */ + sethi %hi(PAGE_SIZE), %g5 + cmp %g4, %g5 + bleu,pn %xcc, kvmap_dtlb_longpath nop - ba,a,pt %xcc, kvmap_load -#endif -kvmap_nonlinear: + KERN_TSB_LOOKUP_TL1(%g4, %g6, %g5, %g1, %g2, %g3, kvmap_dtlb_load) + +kvmap_dtlb_tsbmiss: sethi %hi(MODULES_VADDR), %g5 cmp %g4, %g5 - blu,pn %xcc, longpath + blu,pn %xcc, kvmap_dtlb_longpath mov (VMALLOC_END >> 24), %g5 sllx %g5, 24, %g5 cmp %g4, %g5 - bgeu,pn %xcc, longpath + bgeu,pn %xcc, kvmap_dtlb_longpath nop kvmap_check_obp: sethi %hi(LOW_OBP_ADDRESS), %g5 cmp %g4, %g5 - blu,pn %xcc, kvmap_vmalloc_addr + blu,pn %xcc, kvmap_dtlb_vmalloc_addr mov 0x1, %g5 sllx %g5, 32, %g5 cmp %g4, %g5 - blu,pn %xcc, kvmap_do_obp + blu,pn %xcc, kvmap_dtlb_obp nop - -kvmap_vmalloc_addr: - /* If we get here, a vmalloc addr was accessed, load kernel VPTE. */ - ldxa [%g3 + %g6] ASI_N, %g5 - brgez,pn %g5, longpath + ba,pt %xcc, kvmap_dtlb_vmalloc_addr nop -kvmap_load: - /* PTE is valid, load into TLB and return from trap. */ - stxa %g5, [%g0] ASI_DTLB_DATA_IN ! Reload TLB - retry +kvmap_dtlb_longpath: + rdpr %pstate, %g5 + wrpr %g5, PSTATE_AG | PSTATE_MG, %pstate + rdpr %tl, %g4 + cmp %g4, 1 + mov TLB_TAG_ACCESS, %g4 + ldxa [%g4] ASI_DMMU, %g5 + be,pt %xcc, sparc64_realfault_common + mov FAULT_CODE_DTLB, %g4 + ba,pt %xcc, winfix_trampoline + nop diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c index 059b0d02522..2784aab0d3e 100644 --- a/arch/sparc64/kernel/process.c +++ b/arch/sparc64/kernel/process.c @@ -44,6 +44,7 @@ #include #include #include +#include #include /* #define VERBOSE_SHOWREGS */ @@ -433,30 +434,16 @@ void exit_thread(void) void flush_thread(void) { struct thread_info *t = current_thread_info(); + struct mm_struct *mm; if (t->flags & _TIF_ABI_PENDING) t->flags ^= (_TIF_ABI_PENDING | _TIF_32BIT); - if (t->task->mm) { - unsigned long pgd_cache = 0UL; - if (test_thread_flag(TIF_32BIT)) { - struct mm_struct *mm = t->task->mm; - pgd_t *pgd0 = &mm->pgd[0]; - pud_t *pud0 = pud_offset(pgd0, 0); + mm = t->task->mm; + if (mm) + tsb_context_switch(__pa(mm->pgd), + mm->context.sparc64_tsb); - if (pud_none(*pud0)) { - pmd_t *page = pmd_alloc_one(mm, 0); - pud_set(pud0, page); - } - pgd_cache = get_pgd_cache(pgd0); - } - __asm__ __volatile__("stxa %0, [%1] %2\n\t" - "membar #Sync" - : /* no outputs */ - : "r" (pgd_cache), - "r" (TSB_REG), - "i" (ASI_DMMU)); - } set_thread_wsaved(0); /* Turn off performance counters if on. */ diff --git a/arch/sparc64/kernel/rtrap.S b/arch/sparc64/kernel/rtrap.S index b80eba0081c..213eb4a9d8a 100644 --- a/arch/sparc64/kernel/rtrap.S +++ b/arch/sparc64/kernel/rtrap.S @@ -223,10 +223,14 @@ rt_continue: ldx [%sp + PTREGS_OFF + PT_V9_G1], %g1 ldx [%sp + PTREGS_OFF + PT_V9_G3], %g3 ldx [%sp + PTREGS_OFF + PT_V9_G4], %g4 ldx [%sp + PTREGS_OFF + PT_V9_G5], %g5 +#ifdef CONFIG_SMP +#error IMMU TSB usage must be fixed mov TSB_REG, %g6 brnz,a,pn %l3, 1f ldxa [%g6] ASI_IMMU, %g5 -1: ldx [%sp + PTREGS_OFF + PT_V9_G6], %g6 +#endif +1: + ldx [%sp + PTREGS_OFF + PT_V9_G6], %g6 ldx [%sp + PTREGS_OFF + PT_V9_G7], %g7 wrpr %g0, RTRAP_PSTATE_AG_IRQOFF, %pstate ldx [%sp + PTREGS_OFF + PT_V9_I0], %i0 diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 1f7ad8a6905..d2d3369e7b5 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -123,6 +123,7 @@ extern void inherit_locked_prom_mappings(int save_p); static inline void cpu_setup_percpu_base(unsigned long cpu_id) { +#error IMMU TSB usage must be fixed __asm__ __volatile__("mov %0, %%g5\n\t" "stxa %0, [%1] %2\n\t" "membar #Sync" @@ -662,8 +663,6 @@ void smp_call_function_client(int irq, struct pt_regs *regs) extern unsigned long xcall_flush_tlb_mm; extern unsigned long xcall_flush_tlb_pending; extern unsigned long xcall_flush_tlb_kernel_range; -extern unsigned long xcall_flush_tlb_all_spitfire; -extern unsigned long xcall_flush_tlb_all_cheetah; extern unsigned long xcall_report_regs; extern unsigned long xcall_receive_signal; @@ -794,15 +793,6 @@ void smp_report_regs(void) smp_cross_call(&xcall_report_regs, 0, 0, 0); } -void smp_flush_tlb_all(void) -{ - if (tlb_type == spitfire) - smp_cross_call(&xcall_flush_tlb_all_spitfire, 0, 0, 0); - else - smp_cross_call(&xcall_flush_tlb_all_cheetah, 0, 0, 0); - __flush_tlb_all(); -} - /* We know that the window frames of the user have been flushed * to the stack before we get here because all callers of us * are flush_tlb_*() routines, and these run after flush_cache_*() diff --git a/arch/sparc64/kernel/trampoline.S b/arch/sparc64/kernel/trampoline.S index 9478551cb02..782d8c4973e 100644 --- a/arch/sparc64/kernel/trampoline.S +++ b/arch/sparc64/kernel/trampoline.S @@ -295,39 +295,6 @@ do_unlock: wrpr %g5, %tba mov %o2, %g6 - wrpr %o1, PSTATE_MG, %pstate -#define KERN_HIGHBITS ((_PAGE_VALID|_PAGE_SZ4MB)^0xfffff80000000000) -#define KERN_LOWBITS (_PAGE_CP | _PAGE_CV | _PAGE_P | _PAGE_W) - - mov TSB_REG, %g1 - stxa %g0, [%g1] ASI_DMMU - membar #Sync - mov TLB_SFSR, %g1 - sethi %uhi(KERN_HIGHBITS), %g2 - or %g2, %ulo(KERN_HIGHBITS), %g2 - sllx %g2, 32, %g2 - or %g2, KERN_LOWBITS, %g2 - - BRANCH_IF_ANY_CHEETAH(g3,g7,9f) - - ba,pt %xcc, 1f - nop - -9: - sethi %uhi(VPTE_BASE_CHEETAH), %g3 - or %g3, %ulo(VPTE_BASE_CHEETAH), %g3 - ba,pt %xcc, 2f - sllx %g3, 32, %g3 -1: - sethi %uhi(VPTE_BASE_SPITFIRE), %g3 - or %g3, %ulo(VPTE_BASE_SPITFIRE), %g3 - sllx %g3, 32, %g3 - -2: - clr %g7 -#undef KERN_HIGHBITS -#undef KERN_LOWBITS - wrpr %o1, 0x0, %pstate ldx [%g6 + TI_TASK], %g4 diff --git a/arch/sparc64/kernel/tsb.S b/arch/sparc64/kernel/tsb.S new file mode 100644 index 00000000000..44b9e6fed09 --- /dev/null +++ b/arch/sparc64/kernel/tsb.S @@ -0,0 +1,169 @@ +/* tsb.S: Sparc64 TSB table handling. + * + * Copyright (C) 2006 David S. Miller + */ + +#include + + .text + .align 32 + + /* Invoked from TLB miss handler, we are in the + * MMU global registers and they are setup like + * this: + * + * %g1: TSB entry pointer + * %g2: available temporary + * %g3: FAULT_CODE_{D,I}TLB + * %g4: available temporary + * %g5: available temporary + * %g6: TAG TARGET + * %g7: physical address base of the linux page + * tables for the current address space + */ + .globl tsb_miss_dtlb +tsb_miss_dtlb: + mov TLB_TAG_ACCESS, %g4 + ldxa [%g4] ASI_DMMU, %g4 + ba,pt %xcc, tsb_miss_page_table_walk + nop + + .globl tsb_miss_itlb +tsb_miss_itlb: + mov TLB_TAG_ACCESS, %g4 + ldxa [%g4] ASI_IMMU, %g4 + ba,pt %xcc, tsb_miss_page_table_walk + nop + +tsb_miss_page_table_walk: + USER_PGTABLE_WALK_TL1(%g4, %g7, %g5, %g2, tsb_do_fault) + +tsb_reload: + TSB_LOCK_TAG(%g1, %g2, %g4) + + /* Load and check PTE. */ + ldxa [%g5] ASI_PHYS_USE_EC, %g5 + brgez,a,pn %g5, tsb_do_fault + stx %g0, [%g1] + + TSB_WRITE(%g1, %g5, %g6) + + /* Finally, load TLB and return from trap. */ +tsb_tlb_reload: + cmp %g3, FAULT_CODE_DTLB + bne,pn %xcc, tsb_itlb_load + nop + +tsb_dtlb_load: + stxa %g5, [%g0] ASI_DTLB_DATA_IN + retry + +tsb_itlb_load: + stxa %g5, [%g0] ASI_ITLB_DATA_IN + retry + + /* No valid entry in the page tables, do full fault + * processing. + */ + + .globl tsb_do_fault +tsb_do_fault: + cmp %g3, FAULT_CODE_DTLB + rdpr %pstate, %g5 + bne,pn %xcc, tsb_do_itlb_fault + wrpr %g5, PSTATE_AG | PSTATE_MG, %pstate + +tsb_do_dtlb_fault: + rdpr %tl, %g4 + cmp %g4, 1 + mov TLB_TAG_ACCESS, %g4 + ldxa [%g4] ASI_DMMU, %g5 + be,pt %xcc, sparc64_realfault_common + mov FAULT_CODE_DTLB, %g4 + ba,pt %xcc, winfix_trampoline + nop + +tsb_do_itlb_fault: + rdpr %tpc, %g5 + ba,pt %xcc, sparc64_realfault_common + mov FAULT_CODE_ITLB, %g4 + + .globl sparc64_realfault_common +sparc64_realfault_common: + stb %g4, [%g6 + TI_FAULT_CODE] ! Save fault code + stx %g5, [%g6 + TI_FAULT_ADDR] ! Save fault address + ba,pt %xcc, etrap ! Save trap state +1: rd %pc, %g7 ! ... + call do_sparc64_fault ! Call fault handler + add %sp, PTREGS_OFF, %o0 ! Compute pt_regs arg + ba,pt %xcc, rtrap_clr_l6 ! Restore cpu state + nop ! Delay slot (fill me) + + .globl winfix_trampoline +winfix_trampoline: + rdpr %tpc, %g3 ! Prepare winfixup TNPC + or %g3, 0x7c, %g3 ! Compute branch offset + wrpr %g3, %tnpc ! Write it into TNPC + done ! Trap return + + /* Reload MMU related context switch state at + * schedule() time. + * + * %o0: page table physical address + * %o1: TSB address + */ + .globl tsb_context_switch +tsb_context_switch: + wrpr %g0, PSTATE_MG | PSTATE_RMO | PSTATE_PEF | PSTATE_PRIV, %pstate + + /* Set page table base alternate global. */ + mov %o0, %g7 + + /* XXX can this happen? */ + brz,pn %o1, 9f + nop + + /* Lock TSB into D-TLB. */ + sethi %hi(PAGE_SIZE), %o3 + and %o3, %o1, %o3 + sethi %hi(TSBMAP_BASE), %o2 + add %o2, %o3, %o2 + + /* XXX handle PAGE_SIZE != 8K correctly... */ + mov TSB_REG, %g1 + stxa %o2, [%g1] ASI_DMMU + membar #Sync + + stxa %o2, [%g1] ASI_IMMU + membar #Sync + +#define KERN_HIGHBITS ((_PAGE_VALID|_PAGE_SZBITS)^0xfffff80000000000) +#define KERN_LOWBITS (_PAGE_CP | _PAGE_CV | _PAGE_P | _PAGE_W | _PAGE_L) + sethi %uhi(KERN_HIGHBITS), %g2 + or %g2, %ulo(KERN_HIGHBITS), %g2 + sllx %g2, 32, %g2 + or %g2, KERN_LOWBITS, %g2 +#undef KERN_HIGHBITS +#undef KERN_LOWBITS + + xor %o1, %g2, %o1 + + /* We use entry 61 for this locked entry. This is the spitfire + * TLB entry number, and luckily cheetah masks the value with + * 15 ending us up with entry 13 which is what we want in that + * case too. + * + * XXX Interactions with prom_world()... + */ + mov TLB_TAG_ACCESS, %g1 + stxa %o2, [%g1] ASI_DMMU + membar #Sync + mov (61 << 3), %g1 + stxa %o1, [%g1] ASI_DTLB_DATA_ACCESS + membar #Sync + +9: + wrpr %g0, PSTATE_RMO | PSTATE_PEF | PSTATE_PRIV | PSTATE_IE, %pstate + + retl + mov %o2, %o0 diff --git a/arch/sparc64/kernel/ttable.S b/arch/sparc64/kernel/ttable.S index 8365bc1f81f..56f060c8fbf 100644 --- a/arch/sparc64/kernel/ttable.S +++ b/arch/sparc64/kernel/ttable.S @@ -78,9 +78,9 @@ tl0_vaw: TRAP(do_vaw) tl0_cee: membar #Sync TRAP_NOSAVE_7INSNS(__spitfire_cee_trap) tl0_iamiss: -#include "itlb_base.S" +#include "itlb_miss.S" tl0_damiss: -#include "dtlb_base.S" +#include "dtlb_miss.S" tl0_daprot: #include "dtlb_prot.S" tl0_fecc: BTRAP(0x70) /* Fast-ECC on Cheetah */ @@ -241,7 +241,7 @@ tl1_cee: membar #Sync tl1_iamiss: BTRAPTL1(0x64) BTRAPTL1(0x65) BTRAPTL1(0x66) BTRAPTL1(0x67) tl1_damiss: -#include "dtlb_backend.S" +#include "dtlb_miss.S" tl1_daprot: #include "dtlb_prot.S" tl1_fecc: BTRAPTL1(0x70) /* Fast-ECC on Cheetah */ diff --git a/arch/sparc64/kernel/vmlinux.lds.S b/arch/sparc64/kernel/vmlinux.lds.S index 467d13a0d5c..f018aaf4548 100644 --- a/arch/sparc64/kernel/vmlinux.lds.S +++ b/arch/sparc64/kernel/vmlinux.lds.S @@ -43,6 +43,9 @@ SECTIONS __ex_table : { *(__ex_table) } __stop___ex_table = .; + . = ALIGN(8192); + swapper_tsb = .; + . += 8192; . = ALIGN(8192); __init_begin = .; .init.text : { diff --git a/arch/sparc64/kernel/winfixup.S b/arch/sparc64/kernel/winfixup.S index 39160926267..f5d93aa99cb 100644 --- a/arch/sparc64/kernel/winfixup.S +++ b/arch/sparc64/kernel/winfixup.S @@ -85,6 +85,7 @@ fill_fixup: mov %o7, %g6 ldx [%g6 + TI_TASK], %g4 #ifdef CONFIG_SMP +#error IMMU TSB usage must be fixed mov TSB_REG, %g1 ldxa [%g1] ASI_IMMU, %g5 #endif @@ -209,6 +210,7 @@ fill_fixup_mna: mov %o7, %g6 ! Get current back. ldx [%g6 + TI_TASK], %g4 ! Finish it. #ifdef CONFIG_SMP +#error IMMU TSB usage must be fixed mov TSB_REG, %g1 ldxa [%g1] ASI_IMMU, %g5 #endif @@ -278,11 +280,6 @@ window_mna_from_user_common: ba,pt %xcc, rtrap clr %l6 - /* These are only needed for 64-bit mode processes which - * put their stack pointer into the VPTE area and there - * happens to be a VPTE tlb entry mapped there during - * a spill/fill trap to that stack frame. - */ .globl winfix_dax, fill_fixup_dax, spill_fixup_dax winfix_dax: andn %g3, 0x7f, %g3 @@ -318,6 +315,7 @@ fill_fixup_dax: mov %o7, %g6 ! Get current back. ldx [%g6 + TI_TASK], %g4 ! Finish it. #ifdef CONFIG_SMP +#error IMMU TSB usage must be fixed mov TSB_REG, %g1 ldxa [%g1] ASI_IMMU, %g5 #endif diff --git a/arch/sparc64/mm/Makefile b/arch/sparc64/mm/Makefile index 9d0960e69f4..e415bf942bc 100644 --- a/arch/sparc64/mm/Makefile +++ b/arch/sparc64/mm/Makefile @@ -5,6 +5,6 @@ EXTRA_AFLAGS := -ansi EXTRA_CFLAGS := -Werror -obj-y := ultra.o tlb.o fault.o init.o generic.o +obj-y := ultra.o tlb.o tsb.o fault.o init.o generic.o obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 1e44ee26cee..da068f6b259 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -408,8 +408,7 @@ unsigned long prom_virt_to_phys(unsigned long promva, int *error) /* The obp translations are saved based on 8k pagesize, since obp can * use a mixture of pagesizes. Misses to the LOW_OBP_ADDRESS -> - * HI_OBP_ADDRESS range are handled in ktlb.S and do not use the vpte - * scheme (also, see rant in inherit_locked_prom_mappings()). + * HI_OBP_ADDRESS range are handled in ktlb.S. */ static inline int in_obp_range(unsigned long vaddr) { @@ -539,75 +538,6 @@ static void __init inherit_prom_mappings(void) prom_printf("done.\n"); } -/* The OBP specifications for sun4u mark 0xfffffffc00000000 and - * upwards as reserved for use by the firmware (I wonder if this - * will be the same on Cheetah...). We use this virtual address - * range for the VPTE table mappings of the nucleus so we need - * to zap them when we enter the PROM. -DaveM - */ -static void __flush_nucleus_vptes(void) -{ - unsigned long prom_reserved_base = 0xfffffffc00000000UL; - int i; - - /* Only DTLB must be checked for VPTE entries. */ - if (tlb_type == spitfire) { - for (i = 0; i < 63; i++) { - unsigned long tag; - - /* Spitfire Errata #32 workaround */ - /* NOTE: Always runs on spitfire, so no cheetah+ - * page size encodings. - */ - __asm__ __volatile__("stxa %0, [%1] %2\n\t" - "flush %%g6" - : /* No outputs */ - : "r" (0), - "r" (PRIMARY_CONTEXT), "i" (ASI_DMMU)); - - tag = spitfire_get_dtlb_tag(i); - if (((tag & ~(PAGE_MASK)) == 0) && - ((tag & (PAGE_MASK)) >= prom_reserved_base)) { - __asm__ __volatile__("stxa %%g0, [%0] %1\n\t" - "membar #Sync" - : /* no outputs */ - : "r" (TLB_TAG_ACCESS), "i" (ASI_DMMU)); - spitfire_put_dtlb_data(i, 0x0UL); - } - } - } else if (tlb_type == cheetah || tlb_type == cheetah_plus) { - for (i = 0; i < 512; i++) { - unsigned long tag = cheetah_get_dtlb_tag(i, 2); - - if ((tag & ~PAGE_MASK) == 0 && - (tag & PAGE_MASK) >= prom_reserved_base) { - __asm__ __volatile__("stxa %%g0, [%0] %1\n\t" - "membar #Sync" - : /* no outputs */ - : "r" (TLB_TAG_ACCESS), "i" (ASI_DMMU)); - cheetah_put_dtlb_data(i, 0x0UL, 2); - } - - if (tlb_type != cheetah_plus) - continue; - - tag = cheetah_get_dtlb_tag(i, 3); - - if ((tag & ~PAGE_MASK) == 0 && - (tag & PAGE_MASK) >= prom_reserved_base) { - __asm__ __volatile__("stxa %%g0, [%0] %1\n\t" - "membar #Sync" - : /* no outputs */ - : "r" (TLB_TAG_ACCESS), "i" (ASI_DMMU)); - cheetah_put_dtlb_data(i, 0x0UL, 3); - } - } - } else { - /* Implement me :-) */ - BUG(); - } -} - static int prom_ditlb_set; struct prom_tlb_entry { int tlb_ent; @@ -635,9 +565,6 @@ void prom_world(int enter) : "i" (PSTATE_IE)); if (enter) { - /* Kick out nucleus VPTEs. */ - __flush_nucleus_vptes(); - /* Install PROM world. */ for (i = 0; i < 16; i++) { if (prom_dtlb[i].tlb_ent != -1) { @@ -1039,18 +966,7 @@ out: struct pgtable_cache_struct pgt_quicklists; #endif -/* OK, we have to color these pages. The page tables are accessed - * by non-Dcache enabled mapping in the VPTE area by the dtlb_backend.S - * code, as well as by PAGE_OFFSET range direct-mapped addresses by - * other parts of the kernel. By coloring, we make sure that the tlbmiss - * fast handlers do not get data from old/garbage dcache lines that - * correspond to an old/stale virtual address (user/kernel) that - * previously mapped the pagetable page while accessing vpte range - * addresses. The idea is that if the vpte color and PAGE_OFFSET range - * color is the same, then when the kernel initializes the pagetable - * using the later address range, accesses with the first address - * range will see the newly initialized data rather than the garbage. - */ +/* XXX We don't need to color these things in the D-cache any longer. */ #ifdef DCACHE_ALIASING_POSSIBLE #define DC_ALIAS_SHIFT 1 #else @@ -1419,6 +1335,9 @@ void kernel_map_pages(struct page *page, int numpages, int enable) kernel_map_range(phys_start, phys_end, (enable ? PAGE_KERNEL : __pgprot(0))); + flush_tsb_kernel_range(PAGE_OFFSET + phys_start, + PAGE_OFFSET + phys_end); + /* we should perform an IPI and flush all tlbs, * but that can deadlock->flush only current cpu. */ diff --git a/arch/sparc64/mm/tlb.c b/arch/sparc64/mm/tlb.c index 8b104be4662..78357cc2a0b 100644 --- a/arch/sparc64/mm/tlb.c +++ b/arch/sparc64/mm/tlb.c @@ -25,6 +25,8 @@ void flush_tlb_pending(void) struct mmu_gather *mp = &__get_cpu_var(mmu_gathers); if (mp->tlb_nr) { + flush_tsb_user(mp); + if (CTX_VALID(mp->mm->context)) { #ifdef CONFIG_SMP smp_flush_tlb_pending(mp->mm, mp->tlb_nr, @@ -89,62 +91,3 @@ no_cache_flush: if (nr >= TLB_BATCH_NR) flush_tlb_pending(); } - -void flush_tlb_pgtables(struct mm_struct *mm, unsigned long start, unsigned long end) -{ - struct mmu_gather *mp = &__get_cpu_var(mmu_gathers); - unsigned long nr = mp->tlb_nr; - long s = start, e = end, vpte_base; - - if (mp->fullmm) - return; - - /* If start is greater than end, that is a real problem. */ - BUG_ON(start > end); - - /* However, straddling the VA space hole is quite normal. */ - s &= PMD_MASK; - e = (e + PMD_SIZE - 1) & PMD_MASK; - - vpte_base = (tlb_type == spitfire ? - VPTE_BASE_SPITFIRE : - VPTE_BASE_CHEETAH); - - if (unlikely(nr != 0 && mm != mp->mm)) { - flush_tlb_pending(); - nr = 0; - } - - if (nr == 0) - mp->mm = mm; - - start = vpte_base + (s >> (PAGE_SHIFT - 3)); - end = vpte_base + (e >> (PAGE_SHIFT - 3)); - - /* If the request straddles the VA space hole, we - * need to swap start and end. The reason this - * occurs is that "vpte_base" is the center of - * the linear page table mapping area. Thus, - * high addresses with the sign bit set map to - * addresses below vpte_base and non-sign bit - * addresses map to addresses above vpte_base. - */ - if (end < start) { - unsigned long tmp = start; - - start = end; - end = tmp; - } - - while (start < end) { - mp->vaddrs[nr] = start; - mp->tlb_nr = ++nr; - if (nr >= TLB_BATCH_NR) { - flush_tlb_pending(); - nr = 0; - } - start += PAGE_SIZE; - } - if (nr) - flush_tlb_pending(); -} diff --git a/arch/sparc64/mm/tsb.c b/arch/sparc64/mm/tsb.c new file mode 100644 index 00000000000..15e8af58b1d --- /dev/null +++ b/arch/sparc64/mm/tsb.c @@ -0,0 +1,84 @@ +/* arch/sparc64/mm/tsb.c + * + * Copyright (C) 2006 David S. Miller + */ + +#include +#include +#include +#include +#include + +#define TSB_ENTRY_ALIGNMENT 16 + +struct tsb { + unsigned long tag; + unsigned long pte; +} __attribute__((aligned(TSB_ENTRY_ALIGNMENT))); + +/* We use an 8K TSB for the whole kernel, this allows to + * handle about 4MB of modules and vmalloc mappings without + * incurring many hash conflicts. + */ +#define KERNEL_TSB_SIZE_BYTES 8192 +#define KERNEL_TSB_NENTRIES \ + (KERNEL_TSB_SIZE_BYTES / sizeof(struct tsb)) + +extern struct tsb swapper_tsb[KERNEL_TSB_NENTRIES]; + +static inline unsigned long tsb_hash(unsigned long vaddr) +{ + vaddr >>= PAGE_SHIFT; + return vaddr & (KERNEL_TSB_NENTRIES - 1); +} + +static inline int tag_compare(struct tsb *entry, unsigned long vaddr, unsigned long context) +{ + if (context == ~0UL) + return 1; + + return (entry->tag == ((vaddr >> 22) | (context << 48))); +} + +/* TSB flushes need only occur on the processor initiating the address + * space modification, not on each cpu the address space has run on. + * Only the TLB flush needs that treatment. + */ + +void flush_tsb_kernel_range(unsigned long start, unsigned long end) +{ + unsigned long v; + + for (v = start; v < end; v += PAGE_SIZE) { + struct tsb *ent = &swapper_tsb[tsb_hash(v)]; + + if (tag_compare(ent, v, 0)) { + ent->tag = 0UL; + membar_storeload_storestore(); + } + } +} + +void flush_tsb_user(struct mmu_gather *mp) +{ + struct mm_struct *mm = mp->mm; + struct tsb *tsb = (struct tsb *) mm->context.sparc64_tsb; + unsigned long ctx = ~0UL; + int i; + + if (CTX_VALID(mm->context)) + ctx = CTX_HWBITS(mm->context); + + for (i = 0; i < mp->tlb_nr; i++) { + unsigned long v = mp->vaddrs[i]; + struct tsb *ent; + + v &= ~0x1UL; + + ent = &tsb[tsb_hash(v)]; + if (tag_compare(ent, v, ctx)) { + ent->tag = 0UL; + membar_storeload_storestore(); + } + } +} diff --git a/arch/sparc64/mm/ultra.S b/arch/sparc64/mm/ultra.S index e4c9151fa11..22791f29552 100644 --- a/arch/sparc64/mm/ultra.S +++ b/arch/sparc64/mm/ultra.S @@ -453,64 +453,6 @@ xcall_flush_dcache_page_spitfire: /* %g1 == physical page address nop nop - .data - -errata32_hwbug: - .xword 0 - - .text - - /* These two are not performance critical... */ - .globl xcall_flush_tlb_all_spitfire -xcall_flush_tlb_all_spitfire: - /* Spitfire Errata #32 workaround. */ - sethi %hi(errata32_hwbug), %g4 - stx %g0, [%g4 + %lo(errata32_hwbug)] - - clr %g2 - clr %g3 -1: ldxa [%g3] ASI_DTLB_DATA_ACCESS, %g4 - and %g4, _PAGE_L, %g5 - brnz,pn %g5, 2f - mov TLB_TAG_ACCESS, %g7 - - stxa %g0, [%g7] ASI_DMMU - membar #Sync - stxa %g0, [%g3] ASI_DTLB_DATA_ACCESS - membar #Sync - - /* Spitfire Errata #32 workaround. */ - sethi %hi(errata32_hwbug), %g4 - stx %g0, [%g4 + %lo(errata32_hwbug)] - -2: ldxa [%g3] ASI_ITLB_DATA_ACCESS, %g4 - and %g4, _PAGE_L, %g5 - brnz,pn %g5, 2f - mov TLB_TAG_ACCESS, %g7 - - stxa %g0, [%g7] ASI_IMMU - membar #Sync - stxa %g0, [%g3] ASI_ITLB_DATA_ACCESS - membar #Sync - - /* Spitfire Errata #32 workaround. */ - sethi %hi(errata32_hwbug), %g4 - stx %g0, [%g4 + %lo(errata32_hwbug)] - -2: add %g2, 1, %g2 - cmp %g2, SPITFIRE_HIGHEST_LOCKED_TLBENT - ble,pt %icc, 1b - sll %g2, 3, %g3 - flush %g6 - retry - - .globl xcall_flush_tlb_all_cheetah -xcall_flush_tlb_all_cheetah: - mov 0x80, %g2 - stxa %g0, [%g2] ASI_DMMU_DEMAP - stxa %g0, [%g2] ASI_IMMU_DEMAP - retry - /* These just get rescheduled to PIL vectors. */ .globl xcall_call_function xcall_call_function: -- cgit v1.2.3-18-g5258 From 05e28f9de65a38bb0c769080e91b6976e7e1e70c Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 31 Jan 2006 18:30:13 -0800 Subject: [SPARC64]: No need to D-cache color page tables any longer. Unlike the virtual page tables, the new TSB scheme does not require this ugly hack. Signed-off-by: David S. Miller --- arch/sparc64/mm/init.c | 71 +++++--------------------------------------------- 1 file changed, 6 insertions(+), 65 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index da068f6b259..936ae1a594a 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -145,6 +145,10 @@ int bigkernel = 0; #define PGT_CACHE_LOW 25 #define PGT_CACHE_HIGH 50 +#ifndef CONFIG_SMP +struct pgtable_cache_struct pgt_quicklists; +#endif + void check_pgt_cache(void) { preempt_disable(); @@ -152,10 +156,8 @@ void check_pgt_cache(void) do { if (pgd_quicklist) free_pgd_slow(get_pgd_fast()); - if (pte_quicklist[0]) - free_pte_slow(pte_alloc_one_fast(NULL, 0)); - if (pte_quicklist[1]) - free_pte_slow(pte_alloc_one_fast(NULL, 1 << (PAGE_SHIFT + 10))); + if (pte_quicklist) + free_pte_slow(pte_alloc_one_fast()); } while (pgtable_cache_size > PGT_CACHE_LOW); } preempt_enable(); @@ -962,67 +964,6 @@ out: spin_unlock(&ctx_alloc_lock); } -#ifndef CONFIG_SMP -struct pgtable_cache_struct pgt_quicklists; -#endif - -/* XXX We don't need to color these things in the D-cache any longer. */ -#ifdef DCACHE_ALIASING_POSSIBLE -#define DC_ALIAS_SHIFT 1 -#else -#define DC_ALIAS_SHIFT 0 -#endif -pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) -{ - struct page *page; - unsigned long color; - - { - pte_t *ptep = pte_alloc_one_fast(mm, address); - - if (ptep) - return ptep; - } - - color = VPTE_COLOR(address); - page = alloc_pages(GFP_KERNEL|__GFP_REPEAT, DC_ALIAS_SHIFT); - if (page) { - unsigned long *to_free; - unsigned long paddr; - pte_t *pte; - -#ifdef DCACHE_ALIASING_POSSIBLE - set_page_count(page, 1); - ClearPageCompound(page); - - set_page_count((page + 1), 1); - ClearPageCompound(page + 1); -#endif - paddr = (unsigned long) page_address(page); - memset((char *)paddr, 0, (PAGE_SIZE << DC_ALIAS_SHIFT)); - - if (!color) { - pte = (pte_t *) paddr; - to_free = (unsigned long *) (paddr + PAGE_SIZE); - } else { - pte = (pte_t *) (paddr + PAGE_SIZE); - to_free = (unsigned long *) paddr; - } - -#ifdef DCACHE_ALIASING_POSSIBLE - /* Now free the other one up, adjust cache size. */ - preempt_disable(); - *to_free = (unsigned long) pte_quicklist[color ^ 0x1]; - pte_quicklist[color ^ 0x1] = to_free; - pgtable_cache_size++; - preempt_enable(); -#endif - - return pte; - } - return NULL; -} - void sparc_ultra_dump_itlb(void) { int slot; -- cgit v1.2.3-18-g5258 From 3c936465249f863f322154ff1aaa628b84ee5750 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 31 Jan 2006 18:30:27 -0800 Subject: [SPARC64]: Kill pgtable quicklists and use SLAB. Taking a nod from the powerpc port. With the per-cpu caching of both the page allocator and SLAB, the pgtable quicklist scheme becomes relatively silly and primitive. Signed-off-by: David S. Miller --- arch/sparc64/kernel/sparc64_ksyms.c | 4 ---- arch/sparc64/mm/init.c | 32 +++++++++++++++----------------- 2 files changed, 15 insertions(+), 21 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/sparc64_ksyms.c b/arch/sparc64/kernel/sparc64_ksyms.c index 3c06bfb92a8..f1f01378d07 100644 --- a/arch/sparc64/kernel/sparc64_ksyms.c +++ b/arch/sparc64/kernel/sparc64_ksyms.c @@ -241,10 +241,6 @@ EXPORT_SYMBOL(verify_compat_iovec); #endif EXPORT_SYMBOL(dump_fpu); -EXPORT_SYMBOL(pte_alloc_one_kernel); -#ifndef CONFIG_SMP -EXPORT_SYMBOL(pgt_quicklists); -#endif EXPORT_SYMBOL(put_fs_struct); /* math-emu wants this */ diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 936ae1a594a..7c456afaa9a 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -141,26 +141,25 @@ unsigned long sparc64_kern_sec_context __read_mostly; int bigkernel = 0; -/* XXX Tune this... */ -#define PGT_CACHE_LOW 25 -#define PGT_CACHE_HIGH 50 +kmem_cache_t *pgtable_cache __read_mostly; -#ifndef CONFIG_SMP -struct pgtable_cache_struct pgt_quicklists; -#endif +static void zero_ctor(void *addr, kmem_cache_t *cache, unsigned long flags) +{ + clear_page(addr); +} -void check_pgt_cache(void) +void pgtable_cache_init(void) { - preempt_disable(); - if (pgtable_cache_size > PGT_CACHE_HIGH) { - do { - if (pgd_quicklist) - free_pgd_slow(get_pgd_fast()); - if (pte_quicklist) - free_pte_slow(pte_alloc_one_fast()); - } while (pgtable_cache_size > PGT_CACHE_LOW); + pgtable_cache = kmem_cache_create("pgtable_cache", + PAGE_SIZE, PAGE_SIZE, + SLAB_HWCACHE_ALIGN | + SLAB_MUST_HWCACHE_ALIGN, + zero_ctor, + NULL); + if (!pgtable_cache) { + prom_printf("pgtable_cache_init(): Could not create!\n"); + prom_halt(); } - preempt_enable(); } #ifdef CONFIG_DEBUG_DCFLUSH @@ -340,7 +339,6 @@ void show_mem(void) nr_swap_pages << (PAGE_SHIFT-10)); printk("%ld pages of RAM\n", num_physpages); printk("%d free pages\n", nr_free_pages()); - printk("%d pages in page table cache\n",pgtable_cache_size); } void mmu_info(struct seq_file *m) -- cgit v1.2.3-18-g5258 From 56fb4df6da76c35dca22036174e2d1edef83ff1f Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 26 Feb 2006 23:24:22 -0800 Subject: [SPARC64]: Elminate all usage of hard-coded trap globals. UltraSPARC has special sets of global registers which are switched to for certain trap types. There is one set for MMU related traps, one set of Interrupt Vector processing, and another set (called the Alternate globals) for all other trap types. For what seems like forever we've hard coded the values in some of these trap registers. Some examples include: 1) Interrupt Vector global %g6 holds current processors interrupt work struct where received interrupts are managed for IRQ handler dispatch. 2) MMU global %g7 holds the base of the page tables of the currently active address space. 3) Alternate global %g6 held the current_thread_info() value. Such hardcoding has resulted in some serious issues in many areas. There are some code sequences where having another register available would help clean up the implementation. Taking traps such as cross-calls from the OBP firmware requires some trick code sequences wherein we have to save away and restore all of the special sets of global registers when we enter/exit OBP. We were also using the IMMU TSB register on SMP to hold the per-cpu area base address, which doesn't work any longer now that we actually use the TSB facility of the cpu. The implementation is pretty straight forward. One tricky bit is getting the current processor ID as that is different on different cpu variants. We use a stub with a fancy calling convention which we patch at boot time. The calling convention is that the stub is branched to and the (PC - 4) to return to is in register %g1. The cpu number is left in %g6. This stub can be invoked by using the __GET_CPUID macro. We use an array of per-cpu trap state to store the current thread and physical address of the current address space's page tables. The TRAP_LOAD_THREAD_REG loads %g6 with the current thread from this table, it uses __GET_CPUID and also clobbers %g1. TRAP_LOAD_IRQ_WORK is used by the interrupt vector processing to load the current processor's IRQ software state into %g6. It also uses __GET_CPUID and clobbers %g1. Finally, TRAP_LOAD_PGD_PHYS loads the physical address base of the current address space's page tables into %g7, it clobbers %g1 and uses __GET_CPUID. Many refinements are possible, as well as some tuning, with this stuff in place. Signed-off-by: David S. Miller --- arch/sparc64/kernel/entry.S | 122 +++++++++++++++++++++++++++++++++------ arch/sparc64/kernel/etrap.S | 18 +++--- arch/sparc64/kernel/head.S | 20 +------ arch/sparc64/kernel/irq.c | 26 +-------- arch/sparc64/kernel/rtrap.S | 10 ++-- arch/sparc64/kernel/setup.c | 8 +++ arch/sparc64/kernel/smp.c | 55 ++++-------------- arch/sparc64/kernel/trampoline.S | 9 +-- arch/sparc64/kernel/traps.c | 19 ++++++ arch/sparc64/kernel/tsb.S | 26 +++++++-- arch/sparc64/kernel/ttable.S | 2 +- arch/sparc64/kernel/winfixup.S | 24 +++----- arch/sparc64/mm/ultra.S | 10 ++-- 13 files changed, 192 insertions(+), 157 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S index a73553ae7e5..906b64ffdb1 100644 --- a/arch/sparc64/kernel/entry.S +++ b/arch/sparc64/kernel/entry.S @@ -50,7 +50,8 @@ do_fpdis: add %g0, %g0, %g0 ba,a,pt %xcc, rtrap_clr_l6 -1: ldub [%g6 + TI_FPSAVED], %g5 +1: TRAP_LOAD_THREAD_REG + ldub [%g6 + TI_FPSAVED], %g5 wr %g0, FPRS_FEF, %fprs andcc %g5, FPRS_FEF, %g0 be,a,pt %icc, 1f @@ -189,6 +190,7 @@ fp_other_bounce: .globl do_fpother_check_fitos .align 32 do_fpother_check_fitos: + TRAP_LOAD_THREAD_REG sethi %hi(fp_other_bounce - 4), %g7 or %g7, %lo(fp_other_bounce - 4), %g7 @@ -353,8 +355,6 @@ do_fptrap_after_fsr: * * With this method we can do most of the cross-call tlb/cache * flushing very quickly. - * - * Current CPU's IRQ worklist table is locked into %g6, don't touch. */ .text .align 32 @@ -378,6 +378,8 @@ do_ivec: sllx %g2, %g4, %g2 sllx %g4, 2, %g4 + TRAP_LOAD_IRQ_WORK + lduw [%g6 + %g4], %g5 /* g5 = irq_work(cpu, pil) */ stw %g5, [%g3 + 0x00] /* bucket->irq_chain = g5 */ stw %g3, [%g6 + %g4] /* irq_work(cpu, pil) = bucket */ @@ -488,9 +490,24 @@ setcc: retl stx %o1, [%o0 + PT_V9_TSTATE] - .globl utrap, utrap_ill -utrap: brz,pn %g1, etrap + .globl utrap_trap +utrap_trap: /* %g3=handler,%g4=level */ + TRAP_LOAD_THREAD_REG + ldx [%g6 + TI_UTRAPS], %g1 + brnz,pt %g1, invoke_utrap nop + + ba,pt %xcc, etrap + rd %pc, %g7 + mov %l4, %o1 + call bad_trap + add %sp, PTREGS_OFF, %o0 + ba,pt %xcc, rtrap + clr %l6 + +invoke_utrap: + sllx %g3, 3, %g3 + ldx [%g1 + %g3], %g1 save %sp, -128, %sp rdpr %tstate, %l6 rdpr %cwp, %l7 @@ -500,17 +517,6 @@ utrap: brz,pn %g1, etrap rdpr %tnpc, %l7 wrpr %g1, 0, %tnpc done -utrap_ill: - call bad_trap - add %sp, PTREGS_OFF, %o0 - ba,pt %xcc, rtrap - clr %l6 - - /* XXX Here is stuff we still need to write... -DaveM XXX */ - .globl netbsd_syscall -netbsd_syscall: - retl - nop /* We need to carefully read the error status, ACK * the errors, prevent recursive traps, and pass the @@ -1001,7 +1007,7 @@ dcpe_icpe_tl1_common: * %g3: scratch * %g4: AFSR * %g5: AFAR - * %g6: current thread ptr + * %g6: unused, will have current thread ptr after etrap * %g7: scratch */ __cheetah_log_error: @@ -1690,3 +1696,85 @@ __flushw_user: restore %g0, %g0, %g0 2: retl nop + + /* Read cpu ID from hardware, return in %g6. + * (callers_pc - 4) is in %g1. Patched at boot time. + * + * Default is spitfire implementation. + * + * The instruction sequence needs to be 5 instructions + * in order to fit the longest implementation, which is + * currently starfire. + */ + .align 32 + .globl __get_cpu_id +__get_cpu_id: + ldxa [%g0] ASI_UPA_CONFIG, %g6 + srlx %g6, 17, %g6 + jmpl %g1 + 0x4, %g0 + and %g6, 0x1f, %g6 + nop + +__get_cpu_id_cheetah_safari: + ldxa [%g0] ASI_SAFARI_CONFIG, %g6 + srlx %g6, 17, %g6 + jmpl %g1 + 0x4, %g0 + and %g6, 0x3ff, %g6 + nop + +__get_cpu_id_cheetah_jbus: + ldxa [%g0] ASI_JBUS_CONFIG, %g6 + srlx %g6, 17, %g6 + jmpl %g1 + 0x4, %g0 + and %g6, 0x1f, %g6 + nop + +__get_cpu_id_starfire: + sethi %hi(0x1fff40000d0 >> 9), %g6 + sllx %g6, 9, %g6 + or %g6, 0xd0, %g6 + jmpl %g1 + 0x4, %g0 + lduwa [%g6] ASI_PHYS_BYPASS_EC_E, %g6 + + .globl per_cpu_patch +per_cpu_patch: + sethi %hi(this_is_starfire), %o0 + lduw [%o0 + %lo(this_is_starfire)], %o1 + sethi %hi(__get_cpu_id_starfire), %o0 + brnz,pn %o1, 10f + or %o0, %lo(__get_cpu_id_starfire), %o0 + sethi %hi(tlb_type), %o0 + lduw [%o0 + %lo(tlb_type)], %o1 + brz,pt %o1, 11f + nop + rdpr %ver, %o0 + srlx %o0, 32, %o0 + sethi %hi(0x003e0016), %o1 + or %o1, %lo(0x003e0016), %o1 + cmp %o0, %o1 + sethi %hi(__get_cpu_id_cheetah_jbus), %o0 + be,pn %icc, 10f + or %o0, %lo(__get_cpu_id_cheetah_jbus), %o0 + sethi %hi(__get_cpu_id_cheetah_safari), %o0 + or %o0, %lo(__get_cpu_id_cheetah_safari), %o0 +10: + sethi %hi(__get_cpu_id), %o1 + or %o1, %lo(__get_cpu_id), %o1 + lduw [%o0 + 0x00], %o2 + stw %o2, [%o1 + 0x00] + flush %o1 + 0x00 + lduw [%o0 + 0x04], %o2 + stw %o2, [%o1 + 0x04] + flush %o1 + 0x04 + lduw [%o0 + 0x08], %o2 + stw %o2, [%o1 + 0x08] + flush %o1 + 0x08 + lduw [%o0 + 0x0c], %o2 + stw %o2, [%o1 + 0x0c] + flush %o1 + 0x0c + lduw [%o0 + 0x10], %o2 + stw %o2, [%o1 + 0x10] + flush %o1 + 0x10 +11: + retl + nop diff --git a/arch/sparc64/kernel/etrap.S b/arch/sparc64/kernel/etrap.S index 567dbb765c3..8b3b6d720ed 100644 --- a/arch/sparc64/kernel/etrap.S +++ b/arch/sparc64/kernel/etrap.S @@ -31,6 +31,7 @@ .globl etrap, etrap_irq, etraptl1 etrap: rdpr %pil, %g2 etrap_irq: + TRAP_LOAD_THREAD_REG rdpr %tstate, %g1 sllx %g2, 20, %g3 andcc %g1, TSTATE_PRIV, %g0 @@ -98,11 +99,7 @@ etrap_irq: stx %i7, [%sp + PTREGS_OFF + PT_V9_I7] wrpr %g0, ETRAP_PSTATE2, %pstate mov %l6, %g6 -#ifdef CONFIG_SMP -#error IMMU TSB usage must be fixed - mov TSB_REG, %g3 - ldxa [%g3] ASI_IMMU, %g5 -#endif + LOAD_PER_CPU_BASE(%g4, %g3) jmpl %l2 + 0x4, %g0 ldx [%g6 + TI_TASK], %g4 @@ -126,6 +123,7 @@ etraptl1: /* Save tstate/tpc/tnpc of TL 1-->4 and the tl register itself. * 0x58 TL4's TT * 0x60 TL */ + TRAP_LOAD_THREAD_REG sub %sp, ((4 * 8) * 4) + 8, %g2 rdpr %tl, %g1 @@ -179,7 +177,9 @@ etraptl1: /* Save tstate/tpc/tnpc of TL 1-->4 and the tl register itself. .align 64 .globl scetrap -scetrap: rdpr %pil, %g2 +scetrap: + TRAP_LOAD_THREAD_REG + rdpr %pil, %g2 rdpr %tstate, %g1 sllx %g2, 20, %g3 andcc %g1, TSTATE_PRIV, %g0 @@ -248,11 +248,7 @@ scetrap: rdpr %pil, %g2 stx %i6, [%sp + PTREGS_OFF + PT_V9_I6] mov %l6, %g6 stx %i7, [%sp + PTREGS_OFF + PT_V9_I7] -#ifdef CONFIG_SMP -#error IMMU TSB usage must be fixed - mov TSB_REG, %g3 - ldxa [%g3] ASI_IMMU, %g5 -#endif + LOAD_PER_CPU_BASE(%g4, %g3) ldx [%g6 + TI_TASK], %g4 done diff --git a/arch/sparc64/kernel/head.S b/arch/sparc64/kernel/head.S index d00e20693be..82ce5bced9c 100644 --- a/arch/sparc64/kernel/head.S +++ b/arch/sparc64/kernel/head.S @@ -26,6 +26,7 @@ #include #include #include +#include /* This section from from _start to sparc64_boot_end should fit into * 0x0000000000404000 to 0x0000000000408000. @@ -421,24 +422,6 @@ setup_trap_table: stxa %g2, [%g1] ASI_DMMU membar #Sync - /* The Linux trap handlers expect various trap global registers - * to be setup with some fixed values. So here we set these - * up very carefully. These globals are: - * - * Alternate Globals (PSTATE_AG): - * - * %g6 --> current_thread_info() - * - * Interrupt Globals (PSTATE_IG, setup by init_irqwork_curcpu()): - * - * %g6 --> __irq_work[smp_processor_id()] - */ - - rdpr %pstate, %o1 - mov %g6, %o2 - wrpr %o1, PSTATE_AG, %pstate - mov %o2, %g6 - /* Kill PROM timer */ sethi %hi(0x80000000), %o2 sllx %o2, 32, %o2 @@ -457,7 +440,6 @@ setup_trap_table: 2: wrpr %g0, %g0, %wstate - wrpr %o1, 0x0, %pstate call init_irqwork_curcpu nop diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index f7490ef629b..3e48af2769d 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -848,33 +848,9 @@ static void kill_prom_timer(void) void init_irqwork_curcpu(void) { - register struct irq_work_struct *workp asm("o2"); - register unsigned long tmp asm("o3"); int cpu = hard_smp_processor_id(); - memset(__irq_work + cpu, 0, sizeof(*workp)); - - /* Make sure we are called with PSTATE_IE disabled. */ - __asm__ __volatile__("rdpr %%pstate, %0\n\t" - : "=r" (tmp)); - if (tmp & PSTATE_IE) { - prom_printf("BUG: init_irqwork_curcpu() called with " - "PSTATE_IE enabled, bailing.\n"); - __asm__ __volatile__("mov %%i7, %0\n\t" - : "=r" (tmp)); - prom_printf("BUG: Called from %lx\n", tmp); - prom_halt(); - } - - /* Set interrupt globals. */ - workp = &__irq_work[cpu]; - __asm__ __volatile__( - "rdpr %%pstate, %0\n\t" - "wrpr %0, %1, %%pstate\n\t" - "mov %2, %%g6\n\t" - "wrpr %0, 0x0, %%pstate\n\t" - : "=&r" (tmp) - : "i" (PSTATE_IG), "r" (workp)); + memset(__irq_work + cpu, 0, sizeof(struct irq_work_struct)); } /* Only invoked on boot processor. */ diff --git a/arch/sparc64/kernel/rtrap.S b/arch/sparc64/kernel/rtrap.S index 213eb4a9d8a..5a62ec5d531 100644 --- a/arch/sparc64/kernel/rtrap.S +++ b/arch/sparc64/kernel/rtrap.S @@ -223,12 +223,10 @@ rt_continue: ldx [%sp + PTREGS_OFF + PT_V9_G1], %g1 ldx [%sp + PTREGS_OFF + PT_V9_G3], %g3 ldx [%sp + PTREGS_OFF + PT_V9_G4], %g4 ldx [%sp + PTREGS_OFF + PT_V9_G5], %g5 -#ifdef CONFIG_SMP -#error IMMU TSB usage must be fixed - mov TSB_REG, %g6 - brnz,a,pn %l3, 1f - ldxa [%g6] ASI_IMMU, %g5 -#endif + brz,pt %l3, 1f + nop + /* Must do this before thread reg is clobbered below. */ + LOAD_PER_CPU_BASE(%g6, %g7) 1: ldx [%sp + PTREGS_OFF + PT_V9_G6], %g6 ldx [%sp + PTREGS_OFF + PT_V9_G7], %g7 diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index 158bd31e15b..59a70301a6c 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -507,6 +507,11 @@ void __init setup_arch(char **cmdline_p) /* Work out if we are starfire early on */ check_if_starfire(); + /* Now we know enough to patch the __get_cpu_id() + * trampoline used by trap code. + */ + per_cpu_patch(); + boot_flags_init(*cmdline_p); idprom_init(); @@ -545,6 +550,9 @@ void __init setup_arch(char **cmdline_p) smp_setup_cpu_possible_map(); paging_init(); + + /* Get boot processor trap_block[] setup. */ + init_cur_cpu_trap(); } static int __init set_preferred_console(void) diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index d2d3369e7b5..8c245859d21 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -38,6 +38,7 @@ #include #include #include +#include extern void calibrate_delay(void); @@ -87,10 +88,6 @@ void __init smp_store_cpu_info(int id) cpu_data(id).clock_tick = prom_getintdefault(cpu_node, "clock-frequency", 0); - cpu_data(id).pgcache_size = 0; - cpu_data(id).pte_cache[0] = NULL; - cpu_data(id).pte_cache[1] = NULL; - cpu_data(id).pgd_cache = NULL; cpu_data(id).idle_volume = 1; cpu_data(id).dcache_size = prom_getintdefault(cpu_node, "dcache-size", @@ -121,26 +118,15 @@ static volatile unsigned long callin_flag = 0; extern void inherit_locked_prom_mappings(int save_p); -static inline void cpu_setup_percpu_base(unsigned long cpu_id) -{ -#error IMMU TSB usage must be fixed - __asm__ __volatile__("mov %0, %%g5\n\t" - "stxa %0, [%1] %2\n\t" - "membar #Sync" - : /* no outputs */ - : "r" (__per_cpu_offset(cpu_id)), - "r" (TSB_REG), "i" (ASI_IMMU)); -} - void __init smp_callin(void) { int cpuid = hard_smp_processor_id(); inherit_locked_prom_mappings(0); - __flush_tlb_all(); + __local_per_cpu_offset = __per_cpu_offset(cpuid); - cpu_setup_percpu_base(cpuid); + __flush_tlb_all(); smp_setup_percpu_timer(); @@ -1107,12 +1093,15 @@ void __init smp_setup_cpu_possible_map(void) void __devinit smp_prepare_boot_cpu(void) { - if (hard_smp_processor_id() >= NR_CPUS) { + int cpu = hard_smp_processor_id(); + + if (cpu >= NR_CPUS) { prom_printf("Serious problem, boot cpu id >= NR_CPUS\n"); prom_halt(); } - current_thread_info()->cpu = hard_smp_processor_id(); + current_thread_info()->cpu = cpu; + __local_per_cpu_offset = __per_cpu_offset(cpu); cpu_set(smp_processor_id(), cpu_online_map); cpu_set(smp_processor_id(), phys_cpu_present_map); @@ -1173,12 +1162,9 @@ void __init setup_per_cpu_areas(void) { unsigned long goal, size, i; char *ptr; - /* Created by linker magic */ - extern char __per_cpu_start[], __per_cpu_end[]; /* Copy section for each CPU (we discard the original) */ - goal = ALIGN(__per_cpu_end - __per_cpu_start, PAGE_SIZE); - + goal = ALIGN(__per_cpu_end - __per_cpu_start, SMP_CACHE_BYTES); #ifdef CONFIG_MODULES if (goal < PERCPU_ENOUGH_ROOM) goal = PERCPU_ENOUGH_ROOM; @@ -1187,31 +1173,10 @@ void __init setup_per_cpu_areas(void) for (size = 1UL; size < goal; size <<= 1UL) __per_cpu_shift++; - /* Make sure the resulting __per_cpu_base value - * will fit in the 43-bit sign extended IMMU - * TSB register. - */ - ptr = __alloc_bootmem(size * NR_CPUS, PAGE_SIZE, - (unsigned long) __per_cpu_start); + ptr = alloc_bootmem(size * NR_CPUS); __per_cpu_base = ptr - __per_cpu_start; - if ((__per_cpu_shift < PAGE_SHIFT) || - (__per_cpu_base & ~PAGE_MASK) || - (__per_cpu_base != (((long) __per_cpu_base << 20) >> 20))) { - prom_printf("PER_CPU: Invalid layout, " - "ptr[%p] shift[%lx] base[%lx]\n", - ptr, __per_cpu_shift, __per_cpu_base); - prom_halt(); - } - for (i = 0; i < NR_CPUS; i++, ptr += size) memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start); - - /* Finally, load in the boot cpu's base value. - * We abuse the IMMU TSB register for trap handler - * entry and exit loading of %g5. That is why it - * has to be page aligned. - */ - cpu_setup_percpu_base(hard_smp_processor_id()); } diff --git a/arch/sparc64/kernel/trampoline.S b/arch/sparc64/kernel/trampoline.S index 782d8c4973e..18c333f841e 100644 --- a/arch/sparc64/kernel/trampoline.S +++ b/arch/sparc64/kernel/trampoline.S @@ -287,21 +287,18 @@ do_unlock: wrpr %g0, 0, %wstate wrpr %g0, 0, %tl - /* Setup the trap globals, then we can resurface. */ - rdpr %pstate, %o1 - mov %g6, %o2 - wrpr %o1, PSTATE_AG, %pstate + /* Load TBA, then we can resurface. */ sethi %hi(sparc64_ttable_tl0), %g5 wrpr %g5, %tba - mov %o2, %g6 - wrpr %o1, 0x0, %pstate ldx [%g6 + TI_TASK], %g4 wrpr %g0, 0, %wstate call init_irqwork_curcpu nop + call init_cur_cpu_trap + nop /* Start using proper page size encodings in ctx register. */ sethi %hi(sparc64_kern_pri_context), %g3 diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c index 8d44ae5a15e..f47f4874253 100644 --- a/arch/sparc64/kernel/traps.c +++ b/arch/sparc64/kernel/traps.c @@ -2130,7 +2130,22 @@ void do_getpsr(struct pt_regs *regs) } } +struct trap_per_cpu trap_block[NR_CPUS]; + +/* This can get invoked before sched_init() so play it super safe + * and use hard_smp_processor_id(). + */ +void init_cur_cpu_trap(void) +{ + int cpu = hard_smp_processor_id(); + struct trap_per_cpu *p = &trap_block[cpu]; + + p->thread = current_thread_info(); + p->pgd_paddr = 0; +} + extern void thread_info_offsets_are_bolixed_dave(void); +extern void trap_per_cpu_offsets_are_bolixed_dave(void); /* Only invoked on boot processor. */ void __init trap_init(void) @@ -2165,6 +2180,10 @@ void __init trap_init(void) (TI_FPREGS & (64 - 1))) thread_info_offsets_are_bolixed_dave(); + if (TRAP_PER_CPU_THREAD != offsetof(struct trap_per_cpu, thread) || + TRAP_PER_CPU_PGD_PADDR != offsetof(struct trap_per_cpu, pgd_paddr)) + trap_per_cpu_offsets_are_bolixed_dave(); + /* Attach to the address space of init_task. On SMP we * do this in smp.c:smp_callin for other cpus. */ diff --git a/arch/sparc64/kernel/tsb.S b/arch/sparc64/kernel/tsb.S index 44b9e6fed09..50752c51877 100644 --- a/arch/sparc64/kernel/tsb.S +++ b/arch/sparc64/kernel/tsb.S @@ -36,6 +36,15 @@ tsb_miss_itlb: nop tsb_miss_page_table_walk: + /* This clobbers %g1 and %g6, preserve them... */ + mov %g1, %g5 + mov %g6, %g2 + + TRAP_LOAD_PGD_PHYS + + mov %g2, %g6 + mov %g5, %g1 + USER_PGTABLE_WALK_TL1(%g4, %g7, %g5, %g2, tsb_do_fault) tsb_reload: @@ -112,15 +121,20 @@ winfix_trampoline: * %o0: page table physical address * %o1: TSB address */ + .align 32 .globl tsb_context_switch tsb_context_switch: - wrpr %g0, PSTATE_MG | PSTATE_RMO | PSTATE_PEF | PSTATE_PRIV, %pstate + rdpr %pstate, %o5 + wrpr %o5, PSTATE_IE, %pstate - /* Set page table base alternate global. */ - mov %o0, %g7 + ldub [%g6 + TI_CPU], %o3 + sethi %hi(trap_block), %o4 + sllx %o3, TRAP_BLOCK_SZ_SHIFT, %o3 + or %o4, %lo(trap_block), %o4 + add %o4, %o3, %o4 + stx %o0, [%o4 + TRAP_PER_CPU_PGD_PADDR] - /* XXX can this happen? */ - brz,pn %o1, 9f + brgez %o1, 9f nop /* Lock TSB into D-TLB. */ @@ -163,7 +177,7 @@ tsb_context_switch: membar #Sync 9: - wrpr %g0, PSTATE_RMO | PSTATE_PEF | PSTATE_PRIV | PSTATE_IE, %pstate + wrpr %o5, %pstate retl mov %o2, %o0 diff --git a/arch/sparc64/kernel/ttable.S b/arch/sparc64/kernel/ttable.S index 56f060c8fbf..2fb7a33993c 100644 --- a/arch/sparc64/kernel/ttable.S +++ b/arch/sparc64/kernel/ttable.S @@ -128,7 +128,7 @@ tl0_flushw: FLUSH_WINDOW_TRAP tl0_resv104: BTRAP(0x104) BTRAP(0x105) BTRAP(0x106) BTRAP(0x107) .globl tl0_solaris tl0_solaris: SOLARIS_SYSCALL_TRAP -tl0_netbsd: NETBSD_SYSCALL_TRAP +tl0_resv109: BTRAP(0x109) tl0_resv10a: BTRAP(0x10a) BTRAP(0x10b) BTRAP(0x10c) BTRAP(0x10d) BTRAP(0x10e) tl0_resv10f: BTRAP(0x10f) tl0_linux32: LINUX_32BIT_SYSCALL_TRAP diff --git a/arch/sparc64/kernel/winfixup.S b/arch/sparc64/kernel/winfixup.S index f5d93aa99cb..de588036df4 100644 --- a/arch/sparc64/kernel/winfixup.S +++ b/arch/sparc64/kernel/winfixup.S @@ -39,6 +39,7 @@ set_pcontext: */ .globl fill_fixup, spill_fixup fill_fixup: + TRAP_LOAD_THREAD_REG rdpr %tstate, %g1 andcc %g1, TSTATE_PRIV, %g0 or %g4, FAULT_CODE_WINFIXUP, %g4 @@ -84,11 +85,7 @@ fill_fixup: wrpr %l1, (PSTATE_IE | PSTATE_AG | PSTATE_RMO), %pstate mov %o7, %g6 ldx [%g6 + TI_TASK], %g4 -#ifdef CONFIG_SMP -#error IMMU TSB usage must be fixed - mov TSB_REG, %g1 - ldxa [%g1] ASI_IMMU, %g5 -#endif + LOAD_PER_CPU_BASE(%g1, %g2) /* This is the same as below, except we handle this a bit special * since we must preserve %l5 and %l6, see comment above. @@ -107,6 +104,7 @@ fill_fixup: * do not touch %g7 or %g2 so we handle the two cases fine. */ spill_fixup: + TRAP_LOAD_THREAD_REG ldx [%g6 + TI_FLAGS], %g1 andcc %g1, _TIF_32BIT, %g0 ldub [%g6 + TI_WSAVED], %g1 @@ -182,6 +180,7 @@ winfix_mna: wrpr %g3, %tnpc done fill_fixup_mna: + TRAP_LOAD_THREAD_REG rdpr %tstate, %g1 andcc %g1, TSTATE_PRIV, %g0 be,pt %xcc, window_mna_from_user_common @@ -209,17 +208,14 @@ fill_fixup_mna: wrpr %l1, (PSTATE_IE | PSTATE_AG | PSTATE_RMO), %pstate mov %o7, %g6 ! Get current back. ldx [%g6 + TI_TASK], %g4 ! Finish it. -#ifdef CONFIG_SMP -#error IMMU TSB usage must be fixed - mov TSB_REG, %g1 - ldxa [%g1] ASI_IMMU, %g5 -#endif + LOAD_PER_CPU_BASE(%g1, %g2) call mem_address_unaligned add %sp, PTREGS_OFF, %o0 b,pt %xcc, rtrap nop ! yes, the nop is correct spill_fixup_mna: + TRAP_LOAD_THREAD_REG ldx [%g6 + TI_FLAGS], %g1 andcc %g1, _TIF_32BIT, %g0 ldub [%g6 + TI_WSAVED], %g1 @@ -287,6 +283,7 @@ winfix_dax: wrpr %g3, %tnpc done fill_fixup_dax: + TRAP_LOAD_THREAD_REG rdpr %tstate, %g1 andcc %g1, TSTATE_PRIV, %g0 be,pt %xcc, window_dax_from_user_common @@ -314,17 +311,14 @@ fill_fixup_dax: wrpr %l1, (PSTATE_IE | PSTATE_AG | PSTATE_RMO), %pstate mov %o7, %g6 ! Get current back. ldx [%g6 + TI_TASK], %g4 ! Finish it. -#ifdef CONFIG_SMP -#error IMMU TSB usage must be fixed - mov TSB_REG, %g1 - ldxa [%g1] ASI_IMMU, %g5 -#endif + LOAD_PER_CPU_BASE(%g1, %g2) call spitfire_data_access_exception add %sp, PTREGS_OFF, %o0 b,pt %xcc, rtrap nop ! yes, the nop is correct spill_fixup_dax: + TRAP_LOAD_THREAD_REG ldx [%g6 + TI_FLAGS], %g1 andcc %g1, _TIF_32BIT, %g0 ldub [%g6 + TI_WSAVED], %g1 diff --git a/arch/sparc64/mm/ultra.S b/arch/sparc64/mm/ultra.S index 22791f29552..a87394824ec 100644 --- a/arch/sparc64/mm/ultra.S +++ b/arch/sparc64/mm/ultra.S @@ -295,12 +295,10 @@ cheetah_patch_cachetlbops: * %g1 address arg 1 (tlb page and range flushes) * %g7 address arg 2 (tlb range flush only) * - * %g6 ivector table, don't touch - * %g2 scratch 1 - * %g3 scratch 2 - * %g4 scratch 3 - * - * TODO: Make xcall TLB range flushes use the tricks above... -DaveM + * %g6 scratch 1 + * %g2 scratch 2 + * %g3 scratch 3 + * %g4 scratch 4 */ .align 32 .globl xcall_flush_tlb_mm -- cgit v1.2.3-18-g5258 From 09f94287f7260e03bbeab497e743691fafcc22c3 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 31 Jan 2006 18:31:06 -0800 Subject: [SPARC64]: TSB refinements. Move {init_new,destroy}_context() out of line. Do not put huge pages into the TSB, only base page size translations. There are some clever things we could do here, but for now let's be correct instead of fancy. Signed-off-by: David S. Miller --- arch/sparc64/kernel/tsb.S | 11 +++++++++++ arch/sparc64/mm/tsb.c | 28 ++++++++++++++++++++++++++++ 2 files changed, 39 insertions(+) (limited to 'arch') diff --git a/arch/sparc64/kernel/tsb.S b/arch/sparc64/kernel/tsb.S index 50752c51877..76f2c0b01f3 100644 --- a/arch/sparc64/kernel/tsb.S +++ b/arch/sparc64/kernel/tsb.S @@ -55,6 +55,17 @@ tsb_reload: brgez,a,pn %g5, tsb_do_fault stx %g0, [%g1] + /* If it is larger than the base page size, don't + * bother putting it into the TSB. + */ + srlx %g5, 32, %g2 + sethi %hi(_PAGE_ALL_SZ_BITS >> 32), %g4 + sethi %hi(_PAGE_SZBITS >> 32), %g7 + and %g2, %g4, %g2 + cmp %g2, %g7 + bne,a,pn %xcc, tsb_tlb_reload + stx %g0, [%g1] + TSB_WRITE(%g1, %g5, %g6) /* Finally, load TLB and return from trap. */ diff --git a/arch/sparc64/mm/tsb.c b/arch/sparc64/mm/tsb.c index 15e8af58b1d..2f84cef6c1b 100644 --- a/arch/sparc64/mm/tsb.c +++ b/arch/sparc64/mm/tsb.c @@ -8,6 +8,7 @@ #include #include #include +#include #define TSB_ENTRY_ALIGNMENT 16 @@ -82,3 +83,30 @@ void flush_tsb_user(struct mmu_gather *mp) } } } + +int init_new_context(struct task_struct *tsk, struct mm_struct *mm) +{ + unsigned long page = get_zeroed_page(GFP_KERNEL); + + mm->context.sparc64_ctx_val = 0UL; + if (unlikely(!page)) + return -ENOMEM; + + mm->context.sparc64_tsb = (unsigned long *) page; + + return 0; +} + +void destroy_context(struct mm_struct *mm) +{ + free_page((unsigned long) mm->context.sparc64_tsb); + + spin_lock(&ctx_alloc_lock); + + if (CTX_VALID(mm->context)) { + unsigned long nr = CTX_NRBITS(mm->context); + mmu_context_bmap[nr>>6] &= ~(1UL << (nr & 63)); + } + + spin_unlock(&ctx_alloc_lock); +} -- cgit v1.2.3-18-g5258 From 98c5584cfc47932c4f3ccf5eee2e0bae1447b85e Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 31 Jan 2006 18:31:20 -0800 Subject: [SPARC64]: Add infrastructure for dynamic TSB sizing. This also cleans up tsb_context_switch(). The assembler routine is now __tsb_context_switch() and the former is an inline function that picks out the bits from the mm_struct and passes it into the assembler code as arguments. setup_tsb_parms() computes the locked TLB entry to map the TSB. Later when we support using the physical address quad load instructions of Cheetah+ and later, we'll simply use the physical address for the TSB register value and set the map virtual and PTE both to zero. Signed-off-by: David S. Miller --- arch/sparc64/kernel/binfmt_aout32.c | 3 +- arch/sparc64/kernel/process.c | 3 +- arch/sparc64/kernel/tsb.S | 55 +++++++----------- arch/sparc64/mm/tsb.c | 109 +++++++++++++++++++++++++++++++----- 4 files changed, 118 insertions(+), 52 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/binfmt_aout32.c b/arch/sparc64/kernel/binfmt_aout32.c index a57d7f2b6f1..181c8cdf954 100644 --- a/arch/sparc64/kernel/binfmt_aout32.c +++ b/arch/sparc64/kernel/binfmt_aout32.c @@ -330,8 +330,7 @@ beyond_if: current->mm->start_stack = (unsigned long) create_aout32_tables((char __user *)bprm->p, bprm); - tsb_context_switch(__pa(current->mm->pgd), - current->mm->context.sparc64_tsb); + tsb_context_switch(mm); start_thread32(regs, ex.a_entry, current->mm->start_stack); if (current->ptrace & PT_PTRACED) diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c index 2784aab0d3e..26548fc604b 100644 --- a/arch/sparc64/kernel/process.c +++ b/arch/sparc64/kernel/process.c @@ -441,8 +441,7 @@ void flush_thread(void) mm = t->task->mm; if (mm) - tsb_context_switch(__pa(mm->pgd), - mm->context.sparc64_tsb); + tsb_context_switch(mm); set_thread_wsaved(0); diff --git a/arch/sparc64/kernel/tsb.S b/arch/sparc64/kernel/tsb.S index 76f2c0b01f3..fe266bad0a2 100644 --- a/arch/sparc64/kernel/tsb.S +++ b/arch/sparc64/kernel/tsb.S @@ -130,48 +130,36 @@ winfix_trampoline: * schedule() time. * * %o0: page table physical address - * %o1: TSB address + * %o1: TSB register value + * %o2: TSB virtual address + * %o3: TSB mapping locked PTE + * + * We have to run this whole thing with interrupts + * disabled so that the current cpu doesn't change + * due to preemption. */ .align 32 - .globl tsb_context_switch -tsb_context_switch: + .globl __tsb_context_switch +__tsb_context_switch: rdpr %pstate, %o5 wrpr %o5, PSTATE_IE, %pstate - ldub [%g6 + TI_CPU], %o3 - sethi %hi(trap_block), %o4 - sllx %o3, TRAP_BLOCK_SZ_SHIFT, %o3 - or %o4, %lo(trap_block), %o4 - add %o4, %o3, %o4 - stx %o0, [%o4 + TRAP_PER_CPU_PGD_PADDR] - - brgez %o1, 9f - nop - - /* Lock TSB into D-TLB. */ - sethi %hi(PAGE_SIZE), %o3 - and %o3, %o1, %o3 - sethi %hi(TSBMAP_BASE), %o2 - add %o2, %o3, %o2 + ldub [%g6 + TI_CPU], %g1 + sethi %hi(trap_block), %g2 + sllx %g1, TRAP_BLOCK_SZ_SHIFT, %g1 + or %g2, %lo(trap_block), %g2 + add %g2, %g1, %g2 + stx %o0, [%g2 + TRAP_PER_CPU_PGD_PADDR] - /* XXX handle PAGE_SIZE != 8K correctly... */ mov TSB_REG, %g1 - stxa %o2, [%g1] ASI_DMMU + stxa %o1, [%g1] ASI_DMMU membar #Sync - stxa %o2, [%g1] ASI_IMMU + stxa %o1, [%g1] ASI_IMMU membar #Sync -#define KERN_HIGHBITS ((_PAGE_VALID|_PAGE_SZBITS)^0xfffff80000000000) -#define KERN_LOWBITS (_PAGE_CP | _PAGE_CV | _PAGE_P | _PAGE_W | _PAGE_L) - sethi %uhi(KERN_HIGHBITS), %g2 - or %g2, %ulo(KERN_HIGHBITS), %g2 - sllx %g2, 32, %g2 - or %g2, KERN_LOWBITS, %g2 -#undef KERN_HIGHBITS -#undef KERN_LOWBITS - - xor %o1, %g2, %o1 + brz %o2, 9f + nop /* We use entry 61 for this locked entry. This is the spitfire * TLB entry number, and luckily cheetah masks the value with @@ -184,11 +172,10 @@ tsb_context_switch: stxa %o2, [%g1] ASI_DMMU membar #Sync mov (61 << 3), %g1 - stxa %o1, [%g1] ASI_DTLB_DATA_ACCESS + stxa %o3, [%g1] ASI_DTLB_DATA_ACCESS membar #Sync - 9: wrpr %o5, %pstate retl - mov %o2, %o0 + nop diff --git a/arch/sparc64/mm/tsb.c b/arch/sparc64/mm/tsb.c index 2f84cef6c1b..dfe7144fcdf 100644 --- a/arch/sparc64/mm/tsb.c +++ b/arch/sparc64/mm/tsb.c @@ -9,13 +9,7 @@ #include #include #include - -#define TSB_ENTRY_ALIGNMENT 16 - -struct tsb { - unsigned long tag; - unsigned long pte; -} __attribute__((aligned(TSB_ENTRY_ALIGNMENT))); +#include /* We use an 8K TSB for the whole kernel, this allows to * handle about 4MB of modules and vmalloc mappings without @@ -27,10 +21,10 @@ struct tsb { extern struct tsb swapper_tsb[KERNEL_TSB_NENTRIES]; -static inline unsigned long tsb_hash(unsigned long vaddr) +static inline unsigned long tsb_hash(unsigned long vaddr, unsigned long nentries) { vaddr >>= PAGE_SHIFT; - return vaddr & (KERNEL_TSB_NENTRIES - 1); + return vaddr & (nentries - 1); } static inline int tag_compare(struct tsb *entry, unsigned long vaddr, unsigned long context) @@ -51,7 +45,8 @@ void flush_tsb_kernel_range(unsigned long start, unsigned long end) unsigned long v; for (v = start; v < end; v += PAGE_SIZE) { - struct tsb *ent = &swapper_tsb[tsb_hash(v)]; + unsigned long hash = tsb_hash(v, KERNEL_TSB_NENTRIES); + struct tsb *ent = &swapper_tsb[hash]; if (tag_compare(ent, v, 0)) { ent->tag = 0UL; @@ -63,8 +58,9 @@ void flush_tsb_kernel_range(unsigned long start, unsigned long end) void flush_tsb_user(struct mmu_gather *mp) { struct mm_struct *mm = mp->mm; - struct tsb *tsb = (struct tsb *) mm->context.sparc64_tsb; + struct tsb *tsb = mm->context.tsb; unsigned long ctx = ~0UL; + unsigned long nentries = mm->context.tsb_nentries; int i; if (CTX_VALID(mm->context)) @@ -76,7 +72,7 @@ void flush_tsb_user(struct mmu_gather *mp) v &= ~0x1UL; - ent = &tsb[tsb_hash(v)]; + ent = &tsb[tsb_hash(v, nentries)]; if (tag_compare(ent, v, ctx)) { ent->tag = 0UL; membar_storeload_storestore(); @@ -84,6 +80,83 @@ void flush_tsb_user(struct mmu_gather *mp) } } +static void setup_tsb_params(struct mm_struct *mm, unsigned long tsb_bytes) +{ + unsigned long tsb_reg, base, tsb_paddr; + unsigned long page_sz, tte; + + mm->context.tsb_nentries = tsb_bytes / sizeof(struct tsb); + + base = TSBMAP_BASE; + tte = (_PAGE_VALID | _PAGE_L | _PAGE_CP | + _PAGE_CV | _PAGE_P | _PAGE_W); + tsb_paddr = __pa(mm->context.tsb); + + /* Use the smallest page size that can map the whole TSB + * in one TLB entry. + */ + switch (tsb_bytes) { + case 8192 << 0: + tsb_reg = 0x0UL; +#ifdef DCACHE_ALIASING_POSSIBLE + base += (tsb_paddr & 8192); +#endif + tte |= _PAGE_SZ8K; + page_sz = 8192; + break; + + case 8192 << 1: + tsb_reg = 0x1UL; + tte |= _PAGE_SZ64K; + page_sz = 64 * 1024; + break; + + case 8192 << 2: + tsb_reg = 0x2UL; + tte |= _PAGE_SZ64K; + page_sz = 64 * 1024; + break; + + case 8192 << 3: + tsb_reg = 0x3UL; + tte |= _PAGE_SZ64K; + page_sz = 64 * 1024; + break; + + case 8192 << 4: + tsb_reg = 0x4UL; + tte |= _PAGE_SZ512K; + page_sz = 512 * 1024; + break; + + case 8192 << 5: + tsb_reg = 0x5UL; + tte |= _PAGE_SZ512K; + page_sz = 512 * 1024; + break; + + case 8192 << 6: + tsb_reg = 0x6UL; + tte |= _PAGE_SZ512K; + page_sz = 512 * 1024; + break; + + case 8192 << 7: + tsb_reg = 0x7UL; + tte |= _PAGE_SZ4MB; + page_sz = 4 * 1024 * 1024; + break; + }; + + tsb_reg |= base; + tsb_reg |= (tsb_paddr & (page_sz - 1UL)); + tte |= (tsb_paddr & ~(page_sz - 1UL)); + + mm->context.tsb_reg_val = tsb_reg; + mm->context.tsb_map_vaddr = base; + mm->context.tsb_map_pte = tte; +} + int init_new_context(struct task_struct *tsk, struct mm_struct *mm) { unsigned long page = get_zeroed_page(GFP_KERNEL); @@ -92,14 +165,22 @@ int init_new_context(struct task_struct *tsk, struct mm_struct *mm) if (unlikely(!page)) return -ENOMEM; - mm->context.sparc64_tsb = (unsigned long *) page; + mm->context.tsb = (struct tsb *) page; + setup_tsb_params(mm, PAGE_SIZE); return 0; } void destroy_context(struct mm_struct *mm) { - free_page((unsigned long) mm->context.sparc64_tsb); + free_page((unsigned long) mm->context.tsb); + + /* We can remove these later, but for now it's useful + * to catch any bogus post-destroy_context() references + * to the TSB. + */ + mm->context.tsb = NULL; + mm->context.tsb_reg_val = 0UL; spin_lock(&ctx_alloc_lock); -- cgit v1.2.3-18-g5258 From bd40791e1d289d807b8580abe1f117e9c62894e4 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 31 Jan 2006 18:31:38 -0800 Subject: [SPARC64]: Dynamically grow TSB in response to RSS growth. As the RSS grows, grow the TSB in order to reduce the likelyhood of hash collisions and thus poor hit rates in the TSB. This definitely needs some serious tuning. Signed-off-by: David S. Miller --- arch/sparc64/kernel/smp.c | 28 +++++++-- arch/sparc64/mm/init.c | 7 +++ arch/sparc64/mm/tsb.c | 151 ++++++++++++++++++++++++++++++++++++++++++++-- 3 files changed, 176 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 8c245859d21..3c14b549cf9 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -581,11 +581,11 @@ extern unsigned long xcall_call_function; * You must not call this function with disabled interrupts or from a * hardware interrupt handler or from a bottom half handler. */ -int smp_call_function(void (*func)(void *info), void *info, - int nonatomic, int wait) +static int smp_call_function_mask(void (*func)(void *info), void *info, + int nonatomic, int wait, cpumask_t mask) { struct call_data_struct data; - int cpus = num_online_cpus() - 1; + int cpus = cpus_weight(mask) - 1; long timeout; if (!cpus) @@ -603,7 +603,7 @@ int smp_call_function(void (*func)(void *info), void *info, call_data = &data; - smp_cross_call(&xcall_call_function, 0, 0, 0); + smp_cross_call_masked(&xcall_call_function, 0, 0, 0, mask); /* * Wait for other cpus to complete function or at @@ -629,6 +629,13 @@ out_timeout: return 0; } +int smp_call_function(void (*func)(void *info), void *info, + int nonatomic, int wait) +{ + return smp_call_function_mask(func, info, nonatomic, wait, + cpu_online_map); +} + void smp_call_function_client(int irq, struct pt_regs *regs) { void (*func) (void *info) = call_data->func; @@ -646,6 +653,19 @@ void smp_call_function_client(int irq, struct pt_regs *regs) } } +static void tsb_sync(void *info) +{ + struct mm_struct *mm = info; + + if (current->active_mm == mm) + tsb_context_switch(mm); +} + +void smp_tsb_sync(struct mm_struct *mm) +{ + smp_call_function_mask(tsb_sync, mm, 0, 1, mm->cpu_vm_mask); +} + extern unsigned long xcall_flush_tlb_mm; extern unsigned long xcall_flush_tlb_pending; extern unsigned long xcall_flush_tlb_kernel_range; diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 7c456afaa9a..a8119cb4fa3 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -246,9 +246,11 @@ static __inline__ void clear_dcache_dirty_cpu(struct page *page, unsigned long c void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte) { + struct mm_struct *mm; struct page *page; unsigned long pfn; unsigned long pg_flags; + unsigned long mm_rss; pfn = pte_pfn(pte); if (pfn_valid(pfn) && @@ -270,6 +272,11 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t p put_cpu(); } + + mm = vma->vm_mm; + mm_rss = get_mm_rss(mm); + if (mm_rss >= mm->context.tsb_rss_limit) + tsb_grow(mm, mm_rss, GFP_ATOMIC); } void flush_dcache_page(struct page *page) diff --git a/arch/sparc64/mm/tsb.c b/arch/sparc64/mm/tsb.c index dfe7144fcdf..707af4b84a0 100644 --- a/arch/sparc64/mm/tsb.c +++ b/arch/sparc64/mm/tsb.c @@ -10,6 +10,7 @@ #include #include #include +#include /* We use an 8K TSB for the whole kernel, this allows to * handle about 4MB of modules and vmalloc mappings without @@ -146,6 +147,9 @@ static void setup_tsb_params(struct mm_struct *mm, unsigned long tsb_bytes) tte |= _PAGE_SZ4MB; page_sz = 4 * 1024 * 1024; break; + + default: + BUG(); }; tsb_reg |= base; @@ -157,23 +161,158 @@ static void setup_tsb_params(struct mm_struct *mm, unsigned long tsb_bytes) mm->context.tsb_map_pte = tte; } +/* The page tables are locked against modifications while this + * runs. + * + * XXX do some prefetching... + */ +static void copy_tsb(struct tsb *old_tsb, unsigned long old_size, + struct tsb *new_tsb, unsigned long new_size) +{ + unsigned long old_nentries = old_size / sizeof(struct tsb); + unsigned long new_nentries = new_size / sizeof(struct tsb); + unsigned long i; + + for (i = 0; i < old_nentries; i++) { + register unsigned long tag asm("o4"); + register unsigned long pte asm("o5"); + unsigned long v; + unsigned int hash; + + __asm__ __volatile__( + "ldda [%2] %3, %0" + : "=r" (tag), "=r" (pte) + : "r" (&old_tsb[i]), "i" (ASI_NUCLEUS_QUAD_LDD)); + + if (!tag || (tag & TSB_TAG_LOCK)) + continue; + + /* We only put base page size PTEs into the TSB, + * but that might change in the future. This code + * would need to be changed if we start putting larger + * page size PTEs into there. + */ + WARN_ON((pte & _PAGE_ALL_SZ_BITS) != _PAGE_SZBITS); + + /* The tag holds bits 22 to 63 of the virtual address + * and the context. Clear out the context, and shift + * up to make a virtual address. + */ + v = (tag & ((1UL << 42UL) - 1UL)) << 22UL; + + /* The implied bits of the tag (bits 13 to 21) are + * determined by the TSB entry index, so fill that in. + */ + v |= (i & (512UL - 1UL)) << 13UL; + + hash = tsb_hash(v, new_nentries); + new_tsb[hash].tag = tag; + new_tsb[hash].pte = pte; + } +} + +/* When the RSS of an address space exceeds mm->context.tsb_rss_limit, + * update_mmu_cache() invokes this routine to try and grow the TSB. + * When we reach the maximum TSB size supported, we stick ~0UL into + * mm->context.tsb_rss_limit so the grow checks in update_mmu_cache() + * will not trigger any longer. + * + * The TSB can be anywhere from 8K to 1MB in size, in increasing powers + * of two. The TSB must be aligned to it's size, so f.e. a 512K TSB + * must be 512K aligned. + * + * The idea here is to grow the TSB when the RSS of the process approaches + * the number of entries that the current TSB can hold at once. Currently, + * we trigger when the RSS hits 3/4 of the TSB capacity. + */ +void tsb_grow(struct mm_struct *mm, unsigned long rss, gfp_t gfp_flags) +{ + unsigned long max_tsb_size = 1 * 1024 * 1024; + unsigned long size, old_size; + struct page *page; + struct tsb *old_tsb; + + if (max_tsb_size > (PAGE_SIZE << MAX_ORDER)) + max_tsb_size = (PAGE_SIZE << MAX_ORDER); + + for (size = PAGE_SIZE; size < max_tsb_size; size <<= 1UL) { + unsigned long n_entries = size / sizeof(struct tsb); + + n_entries = (n_entries * 3) / 4; + if (n_entries > rss) + break; + } + + page = alloc_pages(gfp_flags | __GFP_ZERO, get_order(size)); + if (unlikely(!page)) + return; + + if (size == max_tsb_size) + mm->context.tsb_rss_limit = ~0UL; + else + mm->context.tsb_rss_limit = + ((size / sizeof(struct tsb)) * 3) / 4; + + old_tsb = mm->context.tsb; + old_size = mm->context.tsb_nentries * sizeof(struct tsb); + + if (old_tsb) + copy_tsb(old_tsb, old_size, page_address(page), size); + + mm->context.tsb = page_address(page); + setup_tsb_params(mm, size); + + /* If old_tsb is NULL, we're being invoked for the first time + * from init_new_context(). + */ + if (old_tsb) { + /* Now force all other processors to reload the new + * TSB state. + */ + smp_tsb_sync(mm); + + /* Finally reload it on the local cpu. No further + * references will remain to the old TSB and we can + * thus free it up. + */ + tsb_context_switch(mm); + + free_pages((unsigned long) old_tsb, get_order(old_size)); + } +} + int init_new_context(struct task_struct *tsk, struct mm_struct *mm) { - unsigned long page = get_zeroed_page(GFP_KERNEL); + unsigned long initial_rss; mm->context.sparc64_ctx_val = 0UL; - if (unlikely(!page)) - return -ENOMEM; - mm->context.tsb = (struct tsb *) page; - setup_tsb_params(mm, PAGE_SIZE); + /* copy_mm() copies over the parent's mm_struct before calling + * us, so we need to zero out the TSB pointer or else tsb_grow() + * will be confused and think there is an older TSB to free up. + */ + mm->context.tsb = NULL; + + /* If this is fork, inherit the parent's TSB size. We would + * grow it to that size on the first page fault anyways. + */ + initial_rss = mm->context.tsb_nentries; + if (initial_rss) + initial_rss -= 1; + + tsb_grow(mm, initial_rss, GFP_KERNEL); + + if (unlikely(!mm->context.tsb)) + return -ENOMEM; return 0; } void destroy_context(struct mm_struct *mm) { - free_page((unsigned long) mm->context.tsb); + unsigned long size = mm->context.tsb_nentries * sizeof(struct tsb); + + free_pages((unsigned long) mm->context.tsb, get_order(size)); /* We can remove these later, but for now it's useful * to catch any bogus post-destroy_context() references -- cgit v1.2.3-18-g5258 From b70c0fa1613c4f69b4a340a0e2bee387560ebbb1 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 31 Jan 2006 18:32:04 -0800 Subject: [SPARC64]: Preload TSB entries from update_mmu_cache(). Signed-off-by: David S. Miller --- arch/sparc64/kernel/tsb.S | 17 +++++++++++++++++ arch/sparc64/mm/init.c | 10 ++++++++++ 2 files changed, 27 insertions(+) (limited to 'arch') diff --git a/arch/sparc64/kernel/tsb.S b/arch/sparc64/kernel/tsb.S index fe266bad0a2..08405ed6928 100644 --- a/arch/sparc64/kernel/tsb.S +++ b/arch/sparc64/kernel/tsb.S @@ -126,6 +126,23 @@ winfix_trampoline: wrpr %g3, %tnpc ! Write it into TNPC done ! Trap return + /* Insert an entry into the TSB. + * + * %o0: TSB entry pointer + * %o1: tag + * %o2: pte + */ + .align 32 + .globl tsb_insert +tsb_insert: + rdpr %pstate, %o5 + wrpr %o5, PSTATE_IE, %pstate + TSB_LOCK_TAG(%o0, %g2, %g3) + TSB_WRITE(%o0, %o2, %o1) + wrpr %o5, %pstate + retl + nop + /* Reload MMU related context switch state at * schedule() time. * diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index a8119cb4fa3..1e8a5a33639 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -277,6 +277,16 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t p mm_rss = get_mm_rss(mm); if (mm_rss >= mm->context.tsb_rss_limit) tsb_grow(mm, mm_rss, GFP_ATOMIC); + + if ((pte_val(pte) & _PAGE_ALL_SZ_BITS) == _PAGE_SZBITS) { + struct tsb *tsb; + unsigned long tag; + + tsb = &mm->context.tsb[(address >> PAGE_SHIFT) & + (mm->context.tsb_nentries - 1UL)]; + tag = (address >> 22UL) | CTX_HWBITS(mm->context) << 48UL; + tsb_insert(tsb, tag, pte_val(pte)); + } } void flush_dcache_page(struct page *page) -- cgit v1.2.3-18-g5258 From 96c6e0d8e2a0eb1338751598be47fa1ffed91704 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 31 Jan 2006 18:32:29 -0800 Subject: [SPARC64]: Kill {save,restore}_alternate_globals() No longer needed now that we no longer have hard-coded alternate global register usage. Signed-off-by: David S. Miller --- arch/sparc64/kernel/entry.S | 70 --------------------------------------------- arch/sparc64/kernel/smp.c | 7 +---- 2 files changed, 1 insertion(+), 76 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S index 906b64ffdb1..ad919f4f4b3 100644 --- a/arch/sparc64/kernel/entry.S +++ b/arch/sparc64/kernel/entry.S @@ -401,76 +401,6 @@ do_ivec_xcall: 1: jmpl %g3, %g0 nop - .globl save_alternate_globals -save_alternate_globals: /* %o0 = save_area */ - rdpr %pstate, %o5 - andn %o5, PSTATE_IE, %o1 - wrpr %o1, PSTATE_AG, %pstate - stx %g0, [%o0 + 0x00] - stx %g1, [%o0 + 0x08] - stx %g2, [%o0 + 0x10] - stx %g3, [%o0 + 0x18] - stx %g4, [%o0 + 0x20] - stx %g5, [%o0 + 0x28] - stx %g6, [%o0 + 0x30] - stx %g7, [%o0 + 0x38] - wrpr %o1, PSTATE_IG, %pstate - stx %g0, [%o0 + 0x40] - stx %g1, [%o0 + 0x48] - stx %g2, [%o0 + 0x50] - stx %g3, [%o0 + 0x58] - stx %g4, [%o0 + 0x60] - stx %g5, [%o0 + 0x68] - stx %g6, [%o0 + 0x70] - stx %g7, [%o0 + 0x78] - wrpr %o1, PSTATE_MG, %pstate - stx %g0, [%o0 + 0x80] - stx %g1, [%o0 + 0x88] - stx %g2, [%o0 + 0x90] - stx %g3, [%o0 + 0x98] - stx %g4, [%o0 + 0xa0] - stx %g5, [%o0 + 0xa8] - stx %g6, [%o0 + 0xb0] - stx %g7, [%o0 + 0xb8] - wrpr %o5, 0x0, %pstate - retl - nop - - .globl restore_alternate_globals -restore_alternate_globals: /* %o0 = save_area */ - rdpr %pstate, %o5 - andn %o5, PSTATE_IE, %o1 - wrpr %o1, PSTATE_AG, %pstate - ldx [%o0 + 0x00], %g0 - ldx [%o0 + 0x08], %g1 - ldx [%o0 + 0x10], %g2 - ldx [%o0 + 0x18], %g3 - ldx [%o0 + 0x20], %g4 - ldx [%o0 + 0x28], %g5 - ldx [%o0 + 0x30], %g6 - ldx [%o0 + 0x38], %g7 - wrpr %o1, PSTATE_IG, %pstate - ldx [%o0 + 0x40], %g0 - ldx [%o0 + 0x48], %g1 - ldx [%o0 + 0x50], %g2 - ldx [%o0 + 0x58], %g3 - ldx [%o0 + 0x60], %g4 - ldx [%o0 + 0x68], %g5 - ldx [%o0 + 0x70], %g6 - ldx [%o0 + 0x78], %g7 - wrpr %o1, PSTATE_MG, %pstate - ldx [%o0 + 0x80], %g0 - ldx [%o0 + 0x88], %g1 - ldx [%o0 + 0x90], %g2 - ldx [%o0 + 0x98], %g3 - ldx [%o0 + 0xa0], %g4 - ldx [%o0 + 0xa8], %g5 - ldx [%o0 + 0xb0], %g6 - ldx [%o0 + 0xb8], %g7 - wrpr %o5, 0x0, %pstate - retl - nop - .globl getcc, setcc getcc: ldx [%o0 + PT_V9_TSTATE], %o1 diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 3c14b549cf9..d030c311cfe 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -940,24 +940,19 @@ void smp_release(void) * can service tlb flush xcalls... */ extern void prom_world(int); -extern void save_alternate_globals(unsigned long *); -extern void restore_alternate_globals(unsigned long *); + void smp_penguin_jailcell(int irq, struct pt_regs *regs) { - unsigned long global_save[24]; - clear_softint(1 << irq); preempt_disable(); __asm__ __volatile__("flushw"); - save_alternate_globals(global_save); prom_world(1); atomic_inc(&smp_capture_registry); membar_storeload_storestore(); while (penguins_are_doing_time) rmb(); - restore_alternate_globals(global_save); atomic_dec(&smp_capture_registry); prom_world(0); -- cgit v1.2.3-18-g5258 From 4753eb2ac7022b999e5e484f1a5dc001dba22bd3 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 31 Jan 2006 18:32:44 -0800 Subject: [SPARC64]: Fix incorrect TSB lock bit handling. The TSB_LOCK_BIT define is actually a special value shifted down by 32-bits for the assembler code macros. In C code, this isn't what we want. Signed-off-by: David S. Miller --- arch/sparc64/mm/tsb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc64/mm/tsb.c b/arch/sparc64/mm/tsb.c index 707af4b84a0..e605478217c 100644 --- a/arch/sparc64/mm/tsb.c +++ b/arch/sparc64/mm/tsb.c @@ -184,7 +184,7 @@ static void copy_tsb(struct tsb *old_tsb, unsigned long old_size, : "=r" (tag), "=r" (pte) : "r" (&old_tsb[i]), "i" (ASI_NUCLEUS_QUAD_LDD)); - if (!tag || (tag & TSB_TAG_LOCK)) + if (!tag || (tag & (1UL << TSB_TAG_LOCK_BIT))) continue; /* We only put base page size PTEs into the TSB, -- cgit v1.2.3-18-g5258 From 4da808c352c290d3f762933d44d4ab90c2fd65f3 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 31 Jan 2006 18:33:00 -0800 Subject: [SPARC64]: Fix bogus flush instruction usage. Some of the trap code was still assuming that alternate global %g6 was hard coded with current_thread_info(). Let's just consistently flush at KERNBASE when we need a pipeline synchronization. That's locked into the TLB and will always work. Signed-off-by: David S. Miller --- arch/sparc64/kernel/etrap.S | 6 ++++-- arch/sparc64/kernel/rtrap.S | 3 ++- arch/sparc64/kernel/winfixup.S | 3 ++- arch/sparc64/lib/clear_page.S | 4 +++- arch/sparc64/mm/ultra.S | 31 +++++++++++++++++++------------ 5 files changed, 30 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/etrap.S b/arch/sparc64/kernel/etrap.S index 8b3b6d720ed..db768101729 100644 --- a/arch/sparc64/kernel/etrap.S +++ b/arch/sparc64/kernel/etrap.S @@ -72,7 +72,8 @@ etrap_irq: sethi %hi(sparc64_kern_pri_context), %g2 ldx [%g2 + %lo(sparc64_kern_pri_context)], %g3 stxa %g3, [%l4] ASI_DMMU - flush %l6 + sethi %hi(KERNBASE), %l4 + flush %l4 wr %g0, ASI_AIUS, %asi 2: wrpr %g0, 0x0, %tl mov %g4, %l4 @@ -215,7 +216,8 @@ scetrap: sethi %hi(sparc64_kern_pri_context), %g2 ldx [%g2 + %lo(sparc64_kern_pri_context)], %g3 stxa %g3, [%l4] ASI_DMMU - flush %l6 + sethi %hi(KERNBASE), %l4 + flush %l4 mov ASI_AIUS, %l7 2: mov %g4, %l4 diff --git a/arch/sparc64/kernel/rtrap.S b/arch/sparc64/kernel/rtrap.S index 5a62ec5d531..89794ebdcbc 100644 --- a/arch/sparc64/kernel/rtrap.S +++ b/arch/sparc64/kernel/rtrap.S @@ -259,7 +259,8 @@ rt_continue: ldx [%sp + PTREGS_OFF + PT_V9_G1], %g1 ldx [%l1 + %lo(sparc64_kern_pri_nuc_bits)], %l1 or %l0, %l1, %l0 stxa %l0, [%l7] ASI_DMMU - flush %g6 + sethi %hi(KERNBASE), %l7 + flush %l7 rdpr %wstate, %l1 rdpr %otherwin, %l2 srl %l1, 3, %l1 diff --git a/arch/sparc64/kernel/winfixup.S b/arch/sparc64/kernel/winfixup.S index de588036df4..c0545d089c9 100644 --- a/arch/sparc64/kernel/winfixup.S +++ b/arch/sparc64/kernel/winfixup.S @@ -20,7 +20,8 @@ set_pcontext: ldx [%l1 + %lo(sparc64_kern_pri_context)], %l1 mov PRIMARY_CONTEXT, %g1 stxa %l1, [%g1] ASI_DMMU - flush %g6 + sethi %hi(KERNBASE), %l1 + flush %l1 retl nop diff --git a/arch/sparc64/lib/clear_page.S b/arch/sparc64/lib/clear_page.S index b59884ef051..cdc634bceba 100644 --- a/arch/sparc64/lib/clear_page.S +++ b/arch/sparc64/lib/clear_page.S @@ -9,6 +9,7 @@ #include #include #include +#include /* What we used to do was lock a TLB entry into a specific * TLB slot, clear the page with interrupts disabled, then @@ -66,7 +67,8 @@ clear_user_page: /* %o0=dest, %o1=vaddr */ wrpr %o4, PSTATE_IE, %pstate stxa %o0, [%g3] ASI_DMMU stxa %g1, [%g0] ASI_DTLB_DATA_IN - flush %g6 + sethi %hi(KERNBASE), %g1 + flush %g1 wrpr %o4, 0x0, %pstate mov 1, %o4 diff --git a/arch/sparc64/mm/ultra.S b/arch/sparc64/mm/ultra.S index a87394824ec..269ed57b3e9 100644 --- a/arch/sparc64/mm/ultra.S +++ b/arch/sparc64/mm/ultra.S @@ -36,9 +36,10 @@ __flush_tlb_mm: /* %o0=(ctx & TAG_CONTEXT_BITS), %o1=SECONDARY_CONTEXT */ mov 0x50, %g3 stxa %g0, [%g3] ASI_DMMU_DEMAP stxa %g0, [%g3] ASI_IMMU_DEMAP + sethi %hi(KERNBASE), %g3 + flush %g3 retl - flush %g6 - nop + nop nop nop nop @@ -72,7 +73,8 @@ __flush_tlb_pending: brnz,pt %o1, 1b nop stxa %g2, [%o4] ASI_DMMU - flush %g6 + sethi %hi(KERNBASE), %o4 + flush %o4 retl wrpr %g7, 0x0, %pstate nop @@ -94,8 +96,10 @@ __flush_tlb_kernel_range: /* %o0=start, %o1=end */ membar #Sync brnz,pt %o3, 1b sub %o3, %o4, %o3 -2: retl - flush %g6 +2: sethi %hi(KERNBASE), %o3 + flush %o3 + retl + nop __spitfire_flush_tlb_mm_slow: rdpr %pstate, %g1 @@ -105,7 +109,8 @@ __spitfire_flush_tlb_mm_slow: stxa %g0, [%g3] ASI_IMMU_DEMAP flush %g6 stxa %g2, [%o1] ASI_DMMU - flush %g6 + sethi %hi(KERNBASE), %o1 + flush %o1 retl wrpr %g1, 0, %pstate @@ -181,7 +186,7 @@ __flush_dcache_page: /* %o0=kaddr, %o1=flush_icache */ .previous /* Cheetah specific versions, patched at boot time. */ -__cheetah_flush_tlb_mm: /* 18 insns */ +__cheetah_flush_tlb_mm: /* 19 insns */ rdpr %pstate, %g7 andn %g7, PSTATE_IE, %g2 wrpr %g2, 0x0, %pstate @@ -196,12 +201,13 @@ __cheetah_flush_tlb_mm: /* 18 insns */ stxa %g0, [%g3] ASI_DMMU_DEMAP stxa %g0, [%g3] ASI_IMMU_DEMAP stxa %g2, [%o2] ASI_DMMU - flush %g6 + sethi %hi(KERNBASE), %o2 + flush %o2 wrpr %g0, 0, %tl retl wrpr %g7, 0x0, %pstate -__cheetah_flush_tlb_pending: /* 26 insns */ +__cheetah_flush_tlb_pending: /* 27 insns */ /* %o0 = context, %o1 = nr, %o2 = vaddrs[] */ rdpr %pstate, %g7 sllx %o1, 3, %o1 @@ -225,7 +231,8 @@ __cheetah_flush_tlb_pending: /* 26 insns */ brnz,pt %o1, 1b nop stxa %g2, [%o4] ASI_DMMU - flush %g6 + sethi %hi(KERNBASE), %o4 + flush %o4 wrpr %g0, 0, %tl retl wrpr %g7, 0x0, %pstate @@ -265,14 +272,14 @@ cheetah_patch_cachetlbops: sethi %hi(__cheetah_flush_tlb_mm), %o1 or %o1, %lo(__cheetah_flush_tlb_mm), %o1 call cheetah_patch_one - mov 18, %o2 + mov 19, %o2 sethi %hi(__flush_tlb_pending), %o0 or %o0, %lo(__flush_tlb_pending), %o0 sethi %hi(__cheetah_flush_tlb_pending), %o1 or %o1, %lo(__cheetah_flush_tlb_pending), %o1 call cheetah_patch_one - mov 26, %o2 + mov 27, %o2 #ifdef DCACHE_ALIASING_POSSIBLE sethi %hi(__flush_dcache_page), %o0 -- cgit v1.2.3-18-g5258 From 6b6d017235acad3ee1681140795593723bb9b9df Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 31 Jan 2006 18:33:12 -0800 Subject: [SPARC64]: Use sparc64_highest_unlocked_tlb_ent in __tsb_context_switch() Instead of ugly hard-coded value. Signed-off-by: David S. Miller --- arch/sparc64/kernel/tsb.S | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/tsb.S b/arch/sparc64/kernel/tsb.S index 08405ed6928..c1532292a62 100644 --- a/arch/sparc64/kernel/tsb.S +++ b/arch/sparc64/kernel/tsb.S @@ -185,12 +185,14 @@ __tsb_context_switch: * * XXX Interactions with prom_world()... */ - mov TLB_TAG_ACCESS, %g1 - stxa %o2, [%g1] ASI_DMMU - membar #Sync - mov (61 << 3), %g1 - stxa %o3, [%g1] ASI_DTLB_DATA_ACCESS - membar #Sync + sethi %hi(sparc64_highest_unlocked_tlb_ent), %o4 + mov TLB_TAG_ACCESS, %g1 + lduw [%o4 + %lo(sparc64_highest_unlocked_tlb_ent)], %g2 + stxa %o2, [%g1] ASI_DMMU + membar #Sync + sllx %g2, 3, %g2 + stxa %o3, [%g2] ASI_DTLB_DATA_ACCESS + membar #Sync 9: wrpr %o5, %pstate -- cgit v1.2.3-18-g5258 From 3487d1d4414fbfab5d98ec559e6f84f55520cb15 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 31 Jan 2006 18:33:25 -0800 Subject: [SPARC64]: Kill PROM locked TLB entry preservation code. It is totally unnecessary complexity. After we take over the trap table, we handle all PROM tlb misses fully. Signed-off-by: David S. Miller --- arch/sparc64/kernel/smp.c | 4 - arch/sparc64/kernel/tsb.S | 7 -- arch/sparc64/mm/init.c | 295 ++-------------------------------------------- 3 files changed, 10 insertions(+), 296 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index d030c311cfe..0e7552546d3 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -116,14 +116,10 @@ static void smp_setup_percpu_timer(void); static volatile unsigned long callin_flag = 0; -extern void inherit_locked_prom_mappings(int save_p); - void __init smp_callin(void) { int cpuid = hard_smp_processor_id(); - inherit_locked_prom_mappings(0); - __local_per_cpu_offset = __per_cpu_offset(cpuid); __flush_tlb_all(); diff --git a/arch/sparc64/kernel/tsb.S b/arch/sparc64/kernel/tsb.S index c1532292a62..c4e7740d5e8 100644 --- a/arch/sparc64/kernel/tsb.S +++ b/arch/sparc64/kernel/tsb.S @@ -178,13 +178,6 @@ __tsb_context_switch: brz %o2, 9f nop - /* We use entry 61 for this locked entry. This is the spitfire - * TLB entry number, and luckily cheetah masks the value with - * 15 ending us up with entry 13 which is what we want in that - * case too. - * - * XXX Interactions with prom_world()... - */ sethi %hi(sparc64_highest_unlocked_tlb_ent), %o4 mov TLB_TAG_ACCESS, %g1 lduw [%o4 + %lo(sparc64_highest_unlocked_tlb_ent)], %g2 diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 1e8a5a33639..f4d22ccb4cf 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -555,294 +555,12 @@ static void __init inherit_prom_mappings(void) prom_printf("done.\n"); } -static int prom_ditlb_set; -struct prom_tlb_entry { - int tlb_ent; - unsigned long tlb_tag; - unsigned long tlb_data; -}; -struct prom_tlb_entry prom_itlb[16], prom_dtlb[16]; - void prom_world(int enter) { - unsigned long pstate; - int i; - if (!enter) set_fs((mm_segment_t) { get_thread_current_ds() }); - if (!prom_ditlb_set) - return; - - /* Make sure the following runs atomically. */ - __asm__ __volatile__("flushw\n\t" - "rdpr %%pstate, %0\n\t" - "wrpr %0, %1, %%pstate" - : "=r" (pstate) - : "i" (PSTATE_IE)); - - if (enter) { - /* Install PROM world. */ - for (i = 0; i < 16; i++) { - if (prom_dtlb[i].tlb_ent != -1) { - __asm__ __volatile__("stxa %0, [%1] %2\n\t" - "membar #Sync" - : : "r" (prom_dtlb[i].tlb_tag), "r" (TLB_TAG_ACCESS), - "i" (ASI_DMMU)); - if (tlb_type == spitfire) - spitfire_put_dtlb_data(prom_dtlb[i].tlb_ent, - prom_dtlb[i].tlb_data); - else if (tlb_type == cheetah || tlb_type == cheetah_plus) - cheetah_put_ldtlb_data(prom_dtlb[i].tlb_ent, - prom_dtlb[i].tlb_data); - } - if (prom_itlb[i].tlb_ent != -1) { - __asm__ __volatile__("stxa %0, [%1] %2\n\t" - "membar #Sync" - : : "r" (prom_itlb[i].tlb_tag), - "r" (TLB_TAG_ACCESS), - "i" (ASI_IMMU)); - if (tlb_type == spitfire) - spitfire_put_itlb_data(prom_itlb[i].tlb_ent, - prom_itlb[i].tlb_data); - else if (tlb_type == cheetah || tlb_type == cheetah_plus) - cheetah_put_litlb_data(prom_itlb[i].tlb_ent, - prom_itlb[i].tlb_data); - } - } - } else { - for (i = 0; i < 16; i++) { - if (prom_dtlb[i].tlb_ent != -1) { - __asm__ __volatile__("stxa %%g0, [%0] %1\n\t" - "membar #Sync" - : : "r" (TLB_TAG_ACCESS), "i" (ASI_DMMU)); - if (tlb_type == spitfire) - spitfire_put_dtlb_data(prom_dtlb[i].tlb_ent, 0x0UL); - else - cheetah_put_ldtlb_data(prom_dtlb[i].tlb_ent, 0x0UL); - } - if (prom_itlb[i].tlb_ent != -1) { - __asm__ __volatile__("stxa %%g0, [%0] %1\n\t" - "membar #Sync" - : : "r" (TLB_TAG_ACCESS), - "i" (ASI_IMMU)); - if (tlb_type == spitfire) - spitfire_put_itlb_data(prom_itlb[i].tlb_ent, 0x0UL); - else - cheetah_put_litlb_data(prom_itlb[i].tlb_ent, 0x0UL); - } - } - } - __asm__ __volatile__("wrpr %0, 0, %%pstate" - : : "r" (pstate)); -} - -void inherit_locked_prom_mappings(int save_p) -{ - int i; - int dtlb_seen = 0; - int itlb_seen = 0; - - /* Fucking losing PROM has more mappings in the TLB, but - * it (conveniently) fails to mention any of these in the - * translations property. The only ones that matter are - * the locked PROM tlb entries, so we impose the following - * irrecovable rule on the PROM, it is allowed 8 locked - * entries in the ITLB and 8 in the DTLB. - * - * Supposedly the upper 16GB of the address space is - * reserved for OBP, BUT I WISH THIS WAS DOCUMENTED - * SOMEWHERE!!!!!!!!!!!!!!!!! Furthermore the entire interface - * used between the client program and the firmware on sun5 - * systems to coordinate mmu mappings is also COMPLETELY - * UNDOCUMENTED!!!!!! Thanks S(t)un! - */ - if (save_p) { - for (i = 0; i < 16; i++) { - prom_itlb[i].tlb_ent = -1; - prom_dtlb[i].tlb_ent = -1; - } - } - if (tlb_type == spitfire) { - int high = sparc64_highest_unlocked_tlb_ent; - for (i = 0; i <= high; i++) { - unsigned long data; - - /* Spitfire Errata #32 workaround */ - /* NOTE: Always runs on spitfire, so no cheetah+ - * page size encodings. - */ - __asm__ __volatile__("stxa %0, [%1] %2\n\t" - "flush %%g6" - : /* No outputs */ - : "r" (0), - "r" (PRIMARY_CONTEXT), "i" (ASI_DMMU)); - - data = spitfire_get_dtlb_data(i); - if ((data & (_PAGE_L|_PAGE_VALID)) == (_PAGE_L|_PAGE_VALID)) { - unsigned long tag; - - /* Spitfire Errata #32 workaround */ - /* NOTE: Always runs on spitfire, so no - * cheetah+ page size encodings. - */ - __asm__ __volatile__("stxa %0, [%1] %2\n\t" - "flush %%g6" - : /* No outputs */ - : "r" (0), - "r" (PRIMARY_CONTEXT), "i" (ASI_DMMU)); - - tag = spitfire_get_dtlb_tag(i); - if (save_p) { - prom_dtlb[dtlb_seen].tlb_ent = i; - prom_dtlb[dtlb_seen].tlb_tag = tag; - prom_dtlb[dtlb_seen].tlb_data = data; - } - __asm__ __volatile__("stxa %%g0, [%0] %1\n\t" - "membar #Sync" - : : "r" (TLB_TAG_ACCESS), "i" (ASI_DMMU)); - spitfire_put_dtlb_data(i, 0x0UL); - - dtlb_seen++; - if (dtlb_seen > 15) - break; - } - } - - for (i = 0; i < high; i++) { - unsigned long data; - - /* Spitfire Errata #32 workaround */ - /* NOTE: Always runs on spitfire, so no - * cheetah+ page size encodings. - */ - __asm__ __volatile__("stxa %0, [%1] %2\n\t" - "flush %%g6" - : /* No outputs */ - : "r" (0), - "r" (PRIMARY_CONTEXT), "i" (ASI_DMMU)); - - data = spitfire_get_itlb_data(i); - if ((data & (_PAGE_L|_PAGE_VALID)) == (_PAGE_L|_PAGE_VALID)) { - unsigned long tag; - - /* Spitfire Errata #32 workaround */ - /* NOTE: Always runs on spitfire, so no - * cheetah+ page size encodings. - */ - __asm__ __volatile__("stxa %0, [%1] %2\n\t" - "flush %%g6" - : /* No outputs */ - : "r" (0), - "r" (PRIMARY_CONTEXT), "i" (ASI_DMMU)); - - tag = spitfire_get_itlb_tag(i); - if (save_p) { - prom_itlb[itlb_seen].tlb_ent = i; - prom_itlb[itlb_seen].tlb_tag = tag; - prom_itlb[itlb_seen].tlb_data = data; - } - __asm__ __volatile__("stxa %%g0, [%0] %1\n\t" - "membar #Sync" - : : "r" (TLB_TAG_ACCESS), "i" (ASI_IMMU)); - spitfire_put_itlb_data(i, 0x0UL); - - itlb_seen++; - if (itlb_seen > 15) - break; - } - } - } else if (tlb_type == cheetah || tlb_type == cheetah_plus) { - int high = sparc64_highest_unlocked_tlb_ent; - - for (i = 0; i <= high; i++) { - unsigned long data; - - data = cheetah_get_ldtlb_data(i); - if ((data & (_PAGE_L|_PAGE_VALID)) == (_PAGE_L|_PAGE_VALID)) { - unsigned long tag; - - tag = cheetah_get_ldtlb_tag(i); - if (save_p) { - prom_dtlb[dtlb_seen].tlb_ent = i; - prom_dtlb[dtlb_seen].tlb_tag = tag; - prom_dtlb[dtlb_seen].tlb_data = data; - } - __asm__ __volatile__("stxa %%g0, [%0] %1\n\t" - "membar #Sync" - : : "r" (TLB_TAG_ACCESS), "i" (ASI_DMMU)); - cheetah_put_ldtlb_data(i, 0x0UL); - - dtlb_seen++; - if (dtlb_seen > 15) - break; - } - } - - for (i = 0; i < high; i++) { - unsigned long data; - - data = cheetah_get_litlb_data(i); - if ((data & (_PAGE_L|_PAGE_VALID)) == (_PAGE_L|_PAGE_VALID)) { - unsigned long tag; - - tag = cheetah_get_litlb_tag(i); - if (save_p) { - prom_itlb[itlb_seen].tlb_ent = i; - prom_itlb[itlb_seen].tlb_tag = tag; - prom_itlb[itlb_seen].tlb_data = data; - } - __asm__ __volatile__("stxa %%g0, [%0] %1\n\t" - "membar #Sync" - : : "r" (TLB_TAG_ACCESS), "i" (ASI_IMMU)); - cheetah_put_litlb_data(i, 0x0UL); - - itlb_seen++; - if (itlb_seen > 15) - break; - } - } - } else { - /* Implement me :-) */ - BUG(); - } - if (save_p) - prom_ditlb_set = 1; -} - -/* Give PROM back his world, done during reboots... */ -void prom_reload_locked(void) -{ - int i; - - for (i = 0; i < 16; i++) { - if (prom_dtlb[i].tlb_ent != -1) { - __asm__ __volatile__("stxa %0, [%1] %2\n\t" - "membar #Sync" - : : "r" (prom_dtlb[i].tlb_tag), "r" (TLB_TAG_ACCESS), - "i" (ASI_DMMU)); - if (tlb_type == spitfire) - spitfire_put_dtlb_data(prom_dtlb[i].tlb_ent, - prom_dtlb[i].tlb_data); - else if (tlb_type == cheetah || tlb_type == cheetah_plus) - cheetah_put_ldtlb_data(prom_dtlb[i].tlb_ent, - prom_dtlb[i].tlb_data); - } - - if (prom_itlb[i].tlb_ent != -1) { - __asm__ __volatile__("stxa %0, [%1] %2\n\t" - "membar #Sync" - : : "r" (prom_itlb[i].tlb_tag), - "r" (TLB_TAG_ACCESS), - "i" (ASI_IMMU)); - if (tlb_type == spitfire) - spitfire_put_itlb_data(prom_itlb[i].tlb_ent, - prom_itlb[i].tlb_data); - else - cheetah_put_litlb_data(prom_itlb[i].tlb_ent, - prom_itlb[i].tlb_data); - } - } + __asm__ __volatile__("flushw"); } #ifdef DCACHE_ALIASING_POSSIBLE @@ -1066,6 +784,15 @@ void sparc_ultra_dump_dtlb(void) } } +static inline void spitfire_errata32(void) +{ + __asm__ __volatile__("stxa %0, [%1] %2\n\t" + "flush %%g6" + : /* No outputs */ + : "r" (0), + "r" (PRIMARY_CONTEXT), "i" (ASI_DMMU)); +} + extern unsigned long cmdline_memory_size; unsigned long __init bootmem_init(unsigned long *pages_avail) @@ -1375,8 +1102,6 @@ void __init paging_init(void) setup_tba(this_is_starfire); } - inherit_locked_prom_mappings(1); - __flush_tlb_all(); /* Setup bootmem... */ -- cgit v1.2.3-18-g5258 From a8b900d801697609d1b56cc9c110148c64678068 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 31 Jan 2006 18:33:37 -0800 Subject: [SPARC64]: Kill sole argument passed to setup_tba(). No longer used, and move extern declaration to a header file. Signed-off-by: David S. Miller --- arch/sparc64/kernel/head.S | 2 +- arch/sparc64/mm/init.c | 11 ++--------- 2 files changed, 3 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/head.S b/arch/sparc64/kernel/head.S index 82ce5bced9c..2988be85147 100644 --- a/arch/sparc64/kernel/head.S +++ b/arch/sparc64/kernel/head.S @@ -454,7 +454,7 @@ setup_trap_table: restore .globl setup_tba -setup_tba: /* i0 = is_starfire */ +setup_tba: save %sp, -192, %sp /* The boot processor is the only cpu which invokes this diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index f4d22ccb4cf..20e7af552ce 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -1092,15 +1092,8 @@ void __init paging_init(void) inherit_prom_mappings(); - /* Ok, we can use our TLB miss and window trap handlers safely. - * We need to do a quick peek here to see if we are on StarFire - * or not, so setup_tba can setup the IRQ globals correctly (it - * needs to get the hard smp processor id correctly). - */ - { - extern void setup_tba(int); - setup_tba(this_is_starfire); - } + /* Ok, we can use our TLB miss and window trap handlers safely. */ + setup_tba(); __flush_tlb_all(); -- cgit v1.2.3-18-g5258 From 2f7ee7c63f08b7f883b710a29d91c1891b81b8e1 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 31 Jan 2006 18:33:49 -0800 Subject: [SPARC64]: Increase swapper_tsb size to 32K. Signed-off-by: David S. Miller --- arch/sparc64/kernel/head.S | 12 ++++++------ arch/sparc64/kernel/vmlinux.lds.S | 3 --- arch/sparc64/mm/tsb.c | 8 -------- 3 files changed, 6 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/head.S b/arch/sparc64/kernel/head.S index 2988be85147..7840271d7aa 100644 --- a/arch/sparc64/kernel/head.S +++ b/arch/sparc64/kernel/head.S @@ -484,16 +484,16 @@ sparc64_boot_end: /* * The following skip makes sure the trap table in ttable.S is aligned * on a 32K boundary as required by the v9 specs for TBA register. + * + * We align to a 32K boundary, then we have the 32K kernel TSB, + * then the 32K aligned trap table. */ 1: .skip 0x4000 + _start - 1b -#ifdef CONFIG_SBUS -/* This is just a hack to fool make depend config.h discovering - strategy: As the .S files below need config.h, but - make depend does not find it for them, we include config.h - in head.S */ -#endif + .globl swapper_tsb +swapper_tsb: + .skip (32 * 1024) ! 0x0000000000408000 diff --git a/arch/sparc64/kernel/vmlinux.lds.S b/arch/sparc64/kernel/vmlinux.lds.S index f018aaf4548..467d13a0d5c 100644 --- a/arch/sparc64/kernel/vmlinux.lds.S +++ b/arch/sparc64/kernel/vmlinux.lds.S @@ -43,9 +43,6 @@ SECTIONS __ex_table : { *(__ex_table) } __stop___ex_table = .; - . = ALIGN(8192); - swapper_tsb = .; - . += 8192; . = ALIGN(8192); __init_begin = .; .init.text : { diff --git a/arch/sparc64/mm/tsb.c b/arch/sparc64/mm/tsb.c index e605478217c..1c4e5c2dfc5 100644 --- a/arch/sparc64/mm/tsb.c +++ b/arch/sparc64/mm/tsb.c @@ -12,14 +12,6 @@ #include #include -/* We use an 8K TSB for the whole kernel, this allows to - * handle about 4MB of modules and vmalloc mappings without - * incurring many hash conflicts. - */ -#define KERNEL_TSB_SIZE_BYTES 8192 -#define KERNEL_TSB_NENTRIES \ - (KERNEL_TSB_SIZE_BYTES / sizeof(struct tsb)) - extern struct tsb swapper_tsb[KERNEL_TSB_NENTRIES]; static inline unsigned long tsb_hash(unsigned long vaddr, unsigned long nentries) -- cgit v1.2.3-18-g5258 From 764afe2edb834930050313459cef9f1ae2656750 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 31 Jan 2006 18:34:06 -0800 Subject: [SPARC64]: Kill hard-coded %pstate setting in sparc_exit. Just flip the bit off of whatever it's currently set to. PSTATE_IE is guarenteed to be enabled when we get here. Signed-off-by: David S. Miller --- arch/sparc64/kernel/entry.S | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S index ad919f4f4b3..563fa4ec33f 100644 --- a/arch/sparc64/kernel/entry.S +++ b/arch/sparc64/kernel/entry.S @@ -1475,13 +1475,14 @@ ret_from_syscall: 1: b,pt %xcc, ret_sys_call ldx [%sp + PTREGS_OFF + PT_V9_I0], %o0 -sparc_exit: wrpr %g0, (PSTATE_RMO | PSTATE_PEF | PSTATE_PRIV), %pstate +sparc_exit: rdpr %pstate, %g2 + wrpr %g2, PSTATE_IE, %pstate rdpr %otherwin, %g1 rdpr %cansave, %g3 add %g3, %g1, %g3 wrpr %g3, 0x0, %cansave wrpr %g0, 0x0, %otherwin - wrpr %g0, (PSTATE_RMO | PSTATE_PEF | PSTATE_PRIV | PSTATE_IE), %pstate + wrpr %g2, 0x0, %pstate ba,pt %xcc, sys_exit stb %g0, [%g6 + TI_WSAVED] -- cgit v1.2.3-18-g5258 From 9bc657b28eba22e36efcdf3afa08100f92971eb4 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 31 Jan 2006 18:34:21 -0800 Subject: [SPARC64]: Fix too early reference to %g6 %g6 is not necessarily set to current_thread_info() at sparc64_realfault_common. So store the fault code and address after we invoke etrap and %g6 is properly set up. Signed-off-by: David S. Miller --- arch/sparc64/kernel/tsb.S | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/tsb.S b/arch/sparc64/kernel/tsb.S index c4e7740d5e8..e1dd37f5e53 100644 --- a/arch/sparc64/kernel/tsb.S +++ b/arch/sparc64/kernel/tsb.S @@ -110,10 +110,13 @@ tsb_do_itlb_fault: .globl sparc64_realfault_common sparc64_realfault_common: - stb %g4, [%g6 + TI_FAULT_CODE] ! Save fault code - stx %g5, [%g6 + TI_FAULT_ADDR] ! Save fault address + /* fault code in %g4, fault address in %g5, etrap will + * preserve these two values in %l4 and %l5 respectively + */ ba,pt %xcc, etrap ! Save trap state 1: rd %pc, %g7 ! ... + stb %l4, [%g6 + TI_FAULT_CODE] ! Save fault code + stx %l5, [%g6 + TI_FAULT_ADDR] ! Save fault address call do_sparc64_fault ! Call fault handler add %sp, PTREGS_OFF, %o0 ! Compute pt_regs arg ba,pt %xcc, rtrap_clr_l6 ! Restore cpu state -- cgit v1.2.3-18-g5258 From 9954863975910a1b9372b7d5006a6cba43bdd288 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 31 Jan 2006 18:34:34 -0800 Subject: [SPARC64]: Kill swapper_pgd_zero, totally unused. Signed-off-by: David S. Miller --- arch/sparc64/mm/init.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 20e7af552ce..2c21d85de78 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -388,7 +388,6 @@ struct linux_prom_translation { /* Exported for kernel TLB miss handling in ktlb.S */ struct linux_prom_translation prom_trans[512] __read_mostly; unsigned int prom_trans_ents __read_mostly; -unsigned int swapper_pgd_zero __read_mostly; extern unsigned long prom_boot_page; extern void prom_remap(unsigned long physpage, unsigned long virtpage, int mmu_ihandle); @@ -1088,8 +1087,6 @@ void __init paging_init(void) pud_set(pud_offset(&swapper_pg_dir[0], 0), swapper_low_pmd_dir + (shift / sizeof(pgd_t))); - swapper_pgd_zero = pgd_val(swapper_pg_dir[0]); - inherit_prom_mappings(); /* Ok, we can use our TLB miss and window trap handlers safely. */ -- cgit v1.2.3-18-g5258 From 86b818687d4894063ecd1190e54717a0cce8c009 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 31 Jan 2006 18:34:51 -0800 Subject: [SPARC64]: Fix race in LOAD_PER_CPU_BASE() Since we use %g5 itself as a temporary, it can get clobbered if we take an interrupt mid-stream and thus cause end up with the final %g5 value too early as a result of rtrap processing. Set %g5 at the very end, atomically, to avoid this problem. Signed-off-by: David S. Miller --- arch/sparc64/kernel/etrap.S | 4 ++-- arch/sparc64/kernel/rtrap.S | 2 +- arch/sparc64/kernel/winfixup.S | 6 +++--- 3 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/etrap.S b/arch/sparc64/kernel/etrap.S index db768101729..d974d18b15b 100644 --- a/arch/sparc64/kernel/etrap.S +++ b/arch/sparc64/kernel/etrap.S @@ -100,7 +100,7 @@ etrap_irq: stx %i7, [%sp + PTREGS_OFF + PT_V9_I7] wrpr %g0, ETRAP_PSTATE2, %pstate mov %l6, %g6 - LOAD_PER_CPU_BASE(%g4, %g3) + LOAD_PER_CPU_BASE(%g4, %g3, %l1) jmpl %l2 + 0x4, %g0 ldx [%g6 + TI_TASK], %g4 @@ -250,7 +250,7 @@ scetrap: stx %i6, [%sp + PTREGS_OFF + PT_V9_I6] mov %l6, %g6 stx %i7, [%sp + PTREGS_OFF + PT_V9_I7] - LOAD_PER_CPU_BASE(%g4, %g3) + LOAD_PER_CPU_BASE(%g4, %g3, %l1) ldx [%g6 + TI_TASK], %g4 done diff --git a/arch/sparc64/kernel/rtrap.S b/arch/sparc64/kernel/rtrap.S index 89794ebdcbc..64bc03610bc 100644 --- a/arch/sparc64/kernel/rtrap.S +++ b/arch/sparc64/kernel/rtrap.S @@ -226,7 +226,7 @@ rt_continue: ldx [%sp + PTREGS_OFF + PT_V9_G1], %g1 brz,pt %l3, 1f nop /* Must do this before thread reg is clobbered below. */ - LOAD_PER_CPU_BASE(%g6, %g7) + LOAD_PER_CPU_BASE(%i0, %i1, %i2) 1: ldx [%sp + PTREGS_OFF + PT_V9_G6], %g6 ldx [%sp + PTREGS_OFF + PT_V9_G7], %g7 diff --git a/arch/sparc64/kernel/winfixup.S b/arch/sparc64/kernel/winfixup.S index c0545d089c9..ade991b7d07 100644 --- a/arch/sparc64/kernel/winfixup.S +++ b/arch/sparc64/kernel/winfixup.S @@ -86,7 +86,7 @@ fill_fixup: wrpr %l1, (PSTATE_IE | PSTATE_AG | PSTATE_RMO), %pstate mov %o7, %g6 ldx [%g6 + TI_TASK], %g4 - LOAD_PER_CPU_BASE(%g1, %g2) + LOAD_PER_CPU_BASE(%g1, %g2, %g3) /* This is the same as below, except we handle this a bit special * since we must preserve %l5 and %l6, see comment above. @@ -209,7 +209,7 @@ fill_fixup_mna: wrpr %l1, (PSTATE_IE | PSTATE_AG | PSTATE_RMO), %pstate mov %o7, %g6 ! Get current back. ldx [%g6 + TI_TASK], %g4 ! Finish it. - LOAD_PER_CPU_BASE(%g1, %g2) + LOAD_PER_CPU_BASE(%g1, %g2, %g3) call mem_address_unaligned add %sp, PTREGS_OFF, %o0 @@ -312,7 +312,7 @@ fill_fixup_dax: wrpr %l1, (PSTATE_IE | PSTATE_AG | PSTATE_RMO), %pstate mov %o7, %g6 ! Get current back. ldx [%g6 + TI_TASK], %g4 ! Finish it. - LOAD_PER_CPU_BASE(%g1, %g2) + LOAD_PER_CPU_BASE(%g1, %g2, %g3) call spitfire_data_access_exception add %sp, PTREGS_OFF, %o0 -- cgit v1.2.3-18-g5258 From 30a6ecad9670d97c9d0fbfa7d80970aeb339bdec Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 31 Jan 2006 18:35:05 -0800 Subject: [SPARC64]: Don't clobber alt-global %g4 on window fixups. If we are returning back to kernel mode, %g4 could be live (for example, in the case where we window spill in the etrap code). So do not change it's value if going back to kernel. Signed-off-by: David S. Miller --- arch/sparc64/kernel/winfixup.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/winfixup.S b/arch/sparc64/kernel/winfixup.S index ade991b7d07..320a762d051 100644 --- a/arch/sparc64/kernel/winfixup.S +++ b/arch/sparc64/kernel/winfixup.S @@ -160,7 +160,7 @@ spill_fixup: andcc %g1, TSTATE_PRIV, %g0 saved and %g1, TSTATE_CWP, %g1 - be,pn %xcc, window_scheisse_from_user_common + be,a,pn %xcc, window_scheisse_from_user_common mov FAULT_CODE_WRITE | FAULT_CODE_DTLB | FAULT_CODE_WINFIXUP, %g4 retry -- cgit v1.2.3-18-g5258 From 517af33237ecfc3c8a93b335365fa61e741ceca4 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 1 Feb 2006 15:55:21 -0800 Subject: [SPARC64]: Access TSB with physical addresses when possible. This way we don't need to lock the TSB into the TLB. The trick is that every TSB load/store is registered into a special instruction patch section. The default uses virtual addresses, and the patch instructions use physical address load/stores. We can't do this on all chips because only cheetah+ and later have the physical variant of the atomic quad load. Signed-off-by: David S. Miller --- arch/sparc64/kernel/dtlb_miss.S | 2 +- arch/sparc64/kernel/itlb_miss.S | 2 +- arch/sparc64/kernel/ktlb.S | 20 ++++----- arch/sparc64/kernel/tsb.S | 35 ++++++++++++--- arch/sparc64/kernel/vmlinux.lds.S | 4 ++ arch/sparc64/mm/init.c | 32 +++++++++++++ arch/sparc64/mm/tsb.c | 95 ++++++++++++++++++++++++++------------- 7 files changed, 143 insertions(+), 47 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/dtlb_miss.S b/arch/sparc64/kernel/dtlb_miss.S index d0f1565cb56..2ef6f6e6e72 100644 --- a/arch/sparc64/kernel/dtlb_miss.S +++ b/arch/sparc64/kernel/dtlb_miss.S @@ -4,7 +4,7 @@ srlx %g6, 48, %g5 ! Get context brz,pn %g5, kvmap_dtlb ! Context 0 processing nop ! Delay slot (fill me) - ldda [%g1] ASI_NUCLEUS_QUAD_LDD, %g4 ! Load TSB entry + TSB_LOAD_QUAD(%g1, %g4) ! Load TSB entry nop ! Push branch to next I$ line cmp %g4, %g6 ! Compare TAG diff --git a/arch/sparc64/kernel/itlb_miss.S b/arch/sparc64/kernel/itlb_miss.S index 6b6c8fee04b..97facce27aa 100644 --- a/arch/sparc64/kernel/itlb_miss.S +++ b/arch/sparc64/kernel/itlb_miss.S @@ -4,7 +4,7 @@ srlx %g6, 48, %g5 ! Get context brz,pn %g5, kvmap_itlb ! Context 0 processing nop ! Delay slot (fill me) - ldda [%g1] ASI_NUCLEUS_QUAD_LDD, %g4 ! Load TSB entry + TSB_LOAD_QUAD(%g1, %g4) ! Load TSB entry cmp %g4, %g6 ! Compare TAG sethi %hi(_PAGE_EXEC), %g4 ! Setup exec check diff --git a/arch/sparc64/kernel/ktlb.S b/arch/sparc64/kernel/ktlb.S index 2b5e71b6888..9b415ab6db6 100644 --- a/arch/sparc64/kernel/ktlb.S +++ b/arch/sparc64/kernel/ktlb.S @@ -44,14 +44,14 @@ kvmap_itlb_tsb_miss: kvmap_itlb_vmalloc_addr: KERN_PGTABLE_WALK(%g4, %g5, %g2, kvmap_itlb_longpath) - TSB_LOCK_TAG(%g1, %g2, %g4) + KTSB_LOCK_TAG(%g1, %g2, %g4) /* Load and check PTE. */ ldxa [%g5] ASI_PHYS_USE_EC, %g5 brgez,a,pn %g5, kvmap_itlb_longpath - stx %g0, [%g1] + KTSB_STORE(%g1, %g0) - TSB_WRITE(%g1, %g5, %g6) + KTSB_WRITE(%g1, %g5, %g6) /* fallthrough to TLB load */ @@ -69,9 +69,9 @@ kvmap_itlb_longpath: kvmap_itlb_obp: OBP_TRANS_LOOKUP(%g4, %g5, %g2, %g3, kvmap_itlb_longpath) - TSB_LOCK_TAG(%g1, %g2, %g4) + KTSB_LOCK_TAG(%g1, %g2, %g4) - TSB_WRITE(%g1, %g5, %g6) + KTSB_WRITE(%g1, %g5, %g6) ba,pt %xcc, kvmap_itlb_load nop @@ -79,9 +79,9 @@ kvmap_itlb_obp: kvmap_dtlb_obp: OBP_TRANS_LOOKUP(%g4, %g5, %g2, %g3, kvmap_dtlb_longpath) - TSB_LOCK_TAG(%g1, %g2, %g4) + KTSB_LOCK_TAG(%g1, %g2, %g4) - TSB_WRITE(%g1, %g5, %g6) + KTSB_WRITE(%g1, %g5, %g6) ba,pt %xcc, kvmap_dtlb_load nop @@ -114,14 +114,14 @@ kvmap_linear_patch: kvmap_dtlb_vmalloc_addr: KERN_PGTABLE_WALK(%g4, %g5, %g2, kvmap_dtlb_longpath) - TSB_LOCK_TAG(%g1, %g2, %g4) + KTSB_LOCK_TAG(%g1, %g2, %g4) /* Load and check PTE. */ ldxa [%g5] ASI_PHYS_USE_EC, %g5 brgez,a,pn %g5, kvmap_dtlb_longpath - stx %g0, [%g1] + KTSB_STORE(%g1, %g0) - TSB_WRITE(%g1, %g5, %g6) + KTSB_WRITE(%g1, %g5, %g6) /* fallthrough to TLB load */ diff --git a/arch/sparc64/kernel/tsb.S b/arch/sparc64/kernel/tsb.S index e1dd37f5e53..ff6a79beb98 100644 --- a/arch/sparc64/kernel/tsb.S +++ b/arch/sparc64/kernel/tsb.S @@ -53,7 +53,7 @@ tsb_reload: /* Load and check PTE. */ ldxa [%g5] ASI_PHYS_USE_EC, %g5 brgez,a,pn %g5, tsb_do_fault - stx %g0, [%g1] + TSB_STORE(%g1, %g0) /* If it is larger than the base page size, don't * bother putting it into the TSB. @@ -64,7 +64,7 @@ tsb_reload: and %g2, %g4, %g2 cmp %g2, %g7 bne,a,pn %xcc, tsb_tlb_reload - stx %g0, [%g1] + TSB_STORE(%g1, %g0) TSB_WRITE(%g1, %g5, %g6) @@ -131,13 +131,13 @@ winfix_trampoline: /* Insert an entry into the TSB. * - * %o0: TSB entry pointer + * %o0: TSB entry pointer (virt or phys address) * %o1: tag * %o2: pte */ .align 32 - .globl tsb_insert -tsb_insert: + .globl __tsb_insert +__tsb_insert: rdpr %pstate, %o5 wrpr %o5, PSTATE_IE, %pstate TSB_LOCK_TAG(%o0, %g2, %g3) @@ -146,6 +146,31 @@ tsb_insert: retl nop + /* Flush the given TSB entry if it has the matching + * tag. + * + * %o0: TSB entry pointer (virt or phys address) + * %o1: tag + */ + .align 32 + .globl tsb_flush +tsb_flush: + sethi %hi(TSB_TAG_LOCK_HIGH), %g2 +1: TSB_LOAD_TAG(%o0, %g1) + srlx %g1, 32, %o3 + andcc %o3, %g2, %g0 + bne,pn %icc, 1b + membar #LoadLoad + cmp %g1, %o1 + bne,pt %xcc, 2f + clr %o3 + TSB_CAS_TAG(%o0, %g1, %o3) + cmp %g1, %o3 + bne,pn %xcc, 1b + nop +2: retl + TSB_MEMBAR + /* Reload MMU related context switch state at * schedule() time. * diff --git a/arch/sparc64/kernel/vmlinux.lds.S b/arch/sparc64/kernel/vmlinux.lds.S index 467d13a0d5c..71b943f1c9b 100644 --- a/arch/sparc64/kernel/vmlinux.lds.S +++ b/arch/sparc64/kernel/vmlinux.lds.S @@ -70,6 +70,10 @@ SECTIONS .con_initcall.init : { *(.con_initcall.init) } __con_initcall_end = .; SECURITY_INIT + . = ALIGN(4); + __tsb_phys_patch = .; + .tsb_phys_patch : { *(.tsb_phys_patch) } + __tsb_phys_patch_end = .; . = ALIGN(8192); __initramfs_start = .; .init.ramfs : { *(.init.ramfs) } diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 2c21d85de78..4893f3e2c33 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -39,6 +39,7 @@ #include #include #include +#include extern void device_scan(void); @@ -244,6 +245,16 @@ static __inline__ void clear_dcache_dirty_cpu(struct page *page, unsigned long c : "g1", "g7"); } +static inline void tsb_insert(struct tsb *ent, unsigned long tag, unsigned long pte) +{ + unsigned long tsb_addr = (unsigned long) ent; + + if (tlb_type == cheetah_plus) + tsb_addr = __pa(tsb_addr); + + __tsb_insert(tsb_addr, tag, pte); +} + void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte) { struct mm_struct *mm; @@ -1040,6 +1051,24 @@ unsigned long __init find_ecache_flush_span(unsigned long size) return ~0UL; } +static void __init tsb_phys_patch(void) +{ + struct tsb_phys_patch_entry *p; + + p = &__tsb_phys_patch; + while (p < &__tsb_phys_patch_end) { + unsigned long addr = p->addr; + + *(unsigned int *) addr = p->insn; + wmb(); + __asm__ __volatile__("flush %0" + : /* no outputs */ + : "r" (addr)); + + p++; + } +} + /* paging_init() sets up the page tables */ extern void cheetah_ecache_flush_init(void); @@ -1052,6 +1081,9 @@ void __init paging_init(void) unsigned long end_pfn, pages_avail, shift; unsigned long real_end, i; + if (tlb_type == cheetah_plus) + tsb_phys_patch(); + /* Find available physical memory... */ read_obp_memory("available", &pavail[0], &pavail_ents); diff --git a/arch/sparc64/mm/tsb.c b/arch/sparc64/mm/tsb.c index 1c4e5c2dfc5..787533f0104 100644 --- a/arch/sparc64/mm/tsb.c +++ b/arch/sparc64/mm/tsb.c @@ -20,12 +20,9 @@ static inline unsigned long tsb_hash(unsigned long vaddr, unsigned long nentries return vaddr & (nentries - 1); } -static inline int tag_compare(struct tsb *entry, unsigned long vaddr, unsigned long context) +static inline int tag_compare(unsigned long tag, unsigned long vaddr, unsigned long context) { - if (context == ~0UL) - return 1; - - return (entry->tag == ((vaddr >> 22) | (context << 48))); + return (tag == ((vaddr >> 22) | (context << 48))); } /* TSB flushes need only occur on the processor initiating the address @@ -41,7 +38,7 @@ void flush_tsb_kernel_range(unsigned long start, unsigned long end) unsigned long hash = tsb_hash(v, KERNEL_TSB_NENTRIES); struct tsb *ent = &swapper_tsb[hash]; - if (tag_compare(ent, v, 0)) { + if (tag_compare(ent->tag, v, 0)) { ent->tag = 0UL; membar_storeload_storestore(); } @@ -52,24 +49,31 @@ void flush_tsb_user(struct mmu_gather *mp) { struct mm_struct *mm = mp->mm; struct tsb *tsb = mm->context.tsb; - unsigned long ctx = ~0UL; unsigned long nentries = mm->context.tsb_nentries; + unsigned long ctx, base; int i; - if (CTX_VALID(mm->context)) - ctx = CTX_HWBITS(mm->context); + if (unlikely(!CTX_VALID(mm->context))) + return; + + ctx = CTX_HWBITS(mm->context); + if (tlb_type == cheetah_plus) + base = __pa(tsb); + else + base = (unsigned long) tsb; + for (i = 0; i < mp->tlb_nr; i++) { unsigned long v = mp->vaddrs[i]; - struct tsb *ent; + unsigned long tag, ent, hash; v &= ~0x1UL; - ent = &tsb[tsb_hash(v, nentries)]; - if (tag_compare(ent, v, ctx)) { - ent->tag = 0UL; - membar_storeload_storestore(); - } + hash = tsb_hash(v, nentries); + ent = base + (hash * sizeof(struct tsb)); + tag = (v >> 22UL) | (ctx << 48UL); + + tsb_flush(ent, tag); } } @@ -84,6 +88,7 @@ static void setup_tsb_params(struct mm_struct *mm, unsigned long tsb_bytes) tte = (_PAGE_VALID | _PAGE_L | _PAGE_CP | _PAGE_CV | _PAGE_P | _PAGE_W); tsb_paddr = __pa(mm->context.tsb); + BUG_ON(tsb_paddr & (tsb_bytes - 1UL)); /* Use the smallest page size that can map the whole TSB * in one TLB entry. @@ -144,13 +149,23 @@ static void setup_tsb_params(struct mm_struct *mm, unsigned long tsb_bytes) BUG(); }; - tsb_reg |= base; - tsb_reg |= (tsb_paddr & (page_sz - 1UL)); - tte |= (tsb_paddr & ~(page_sz - 1UL)); + if (tlb_type == cheetah_plus) { + /* Physical mapping, no locked TLB entry for TSB. */ + tsb_reg |= tsb_paddr; + + mm->context.tsb_reg_val = tsb_reg; + mm->context.tsb_map_vaddr = 0; + mm->context.tsb_map_pte = 0; + } else { + tsb_reg |= base; + tsb_reg |= (tsb_paddr & (page_sz - 1UL)); + tte |= (tsb_paddr & ~(page_sz - 1UL)); + + mm->context.tsb_reg_val = tsb_reg; + mm->context.tsb_map_vaddr = base; + mm->context.tsb_map_pte = tte; + } - mm->context.tsb_reg_val = tsb_reg; - mm->context.tsb_map_vaddr = base; - mm->context.tsb_map_pte = tte; } /* The page tables are locked against modifications while this @@ -168,13 +183,21 @@ static void copy_tsb(struct tsb *old_tsb, unsigned long old_size, for (i = 0; i < old_nentries; i++) { register unsigned long tag asm("o4"); register unsigned long pte asm("o5"); - unsigned long v; - unsigned int hash; - - __asm__ __volatile__( - "ldda [%2] %3, %0" - : "=r" (tag), "=r" (pte) - : "r" (&old_tsb[i]), "i" (ASI_NUCLEUS_QUAD_LDD)); + unsigned long v, hash; + + if (tlb_type == cheetah_plus) { + __asm__ __volatile__( + "ldda [%2] %3, %0" + : "=r" (tag), "=r" (pte) + : "r" (__pa(&old_tsb[i])), + "i" (ASI_QUAD_LDD_PHYS)); + } else { + __asm__ __volatile__( + "ldda [%2] %3, %0" + : "=r" (tag), "=r" (pte) + : "r" (&old_tsb[i]), + "i" (ASI_NUCLEUS_QUAD_LDD)); + } if (!tag || (tag & (1UL << TSB_TAG_LOCK_BIT))) continue; @@ -198,8 +221,20 @@ static void copy_tsb(struct tsb *old_tsb, unsigned long old_size, v |= (i & (512UL - 1UL)) << 13UL; hash = tsb_hash(v, new_nentries); - new_tsb[hash].tag = tag; - new_tsb[hash].pte = pte; + if (tlb_type == cheetah_plus) { + __asm__ __volatile__( + "stxa %0, [%1] %2\n\t" + "stxa %3, [%4] %2" + : /* no outputs */ + : "r" (tag), + "r" (__pa(&new_tsb[hash].tag)), + "i" (ASI_PHYS_USE_EC), + "r" (pte), + "r" (__pa(&new_tsb[hash].pte))); + } else { + new_tsb[hash].tag = tag; + new_tsb[hash].pte = pte; + } } } -- cgit v1.2.3-18-g5258 From 7bec08e38a7d0f088994f6eec9b6374652ea71fb Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 2 Feb 2006 01:20:18 -0800 Subject: [SPARC64]: Correctable ECC errors cannot occur at trap level > 0. The are distrupting, which by the sparc v9 definition means they can only occur when interrupts are enabled in the %pstate register. This never occurs in any of the trap handling code running at trap levels > 0. So just mark it as an unexpected trap. This allows us to kill off the cee_stuff member of struct thread_info. Signed-off-by: David S. Miller --- arch/sparc64/kernel/traps.c | 1 - arch/sparc64/kernel/ttable.S | 18 +----------------- 2 files changed, 1 insertion(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c index f47f4874253..7e52e897266 100644 --- a/arch/sparc64/kernel/traps.c +++ b/arch/sparc64/kernel/traps.c @@ -2169,7 +2169,6 @@ void __init trap_init(void) TI_KERN_CNTD0 != offsetof(struct thread_info, kernel_cntd0) || TI_KERN_CNTD1 != offsetof(struct thread_info, kernel_cntd1) || TI_PCR != offsetof(struct thread_info, pcr_reg) || - TI_CEE_STUFF != offsetof(struct thread_info, cee_stuff) || TI_PRE_COUNT != offsetof(struct thread_info, preempt_count) || TI_NEW_CHILD != offsetof(struct thread_info, new_child) || TI_SYS_NOERROR != offsetof(struct thread_info, syscall_noerror) || diff --git a/arch/sparc64/kernel/ttable.S b/arch/sparc64/kernel/ttable.S index 2fb7a33993c..99531424c59 100644 --- a/arch/sparc64/kernel/ttable.S +++ b/arch/sparc64/kernel/ttable.S @@ -222,23 +222,7 @@ tl1_resv05c: BTRAPTL1(0x5c) BTRAPTL1(0x5d) BTRAPTL1(0x5e) BTRAPTL1(0x5f) tl1_ivec: TRAP_IVEC tl1_paw: TRAPTL1(do_paw_tl1) tl1_vaw: TRAPTL1(do_vaw_tl1) - - /* The grotty trick to save %g1 into current->thread.cee_stuff - * is because when we take this trap we could be interrupting - * trap code already using the trap alternate global registers. - * - * We cross our fingers and pray that this store/load does - * not cause yet another CEE trap. - */ -tl1_cee: membar #Sync - stx %g1, [%g6 + TI_CEE_STUFF] - ldxa [%g0] ASI_AFSR, %g1 - membar #Sync - stxa %g1, [%g0] ASI_AFSR - membar #Sync - ldx [%g6 + TI_CEE_STUFF], %g1 - retry - +tl1_cee: BTRAPTL1(0x63) tl1_iamiss: BTRAPTL1(0x64) BTRAPTL1(0x65) BTRAPTL1(0x66) BTRAPTL1(0x67) tl1_damiss: #include "dtlb_miss.S" -- cgit v1.2.3-18-g5258 From f4e841da30b4bcbb8f1cc20a01157a788ff58b21 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 2 Feb 2006 16:16:24 -0800 Subject: [SPARC64]: Turn off TSB growing for now. There are several tricky races involved with growing the TSB. So just use base-size TSBs for user contexts and we can revisit enabling this later. One part of the SMP problems is that tsb_context_switch() can see partially updated TSB configuration state if tsb_grow() is running in parallel. That's easily solved with a seqlock taken as a writer by tsb_grow() and taken as a reader to capture all the TSB config state in tsb_context_switch(). Then there is flush_tsb_user() running in parallel with a tsb_grow(). In theory we could take the seqlock as a reader there too, and just resample the TSB pointer and reflush but that looks really ugly. Lastly, I believe there is a case with threads that results in a TSB entry lock bit being set spuriously which will cause the next access to that TSB entry to wedge the cpu (since the TSB entry lock bit will never clear). It's either copy_tsb() or some bug elsewhere in the TSB assembly. Signed-off-by: David S. Miller --- arch/sparc64/mm/init.c | 5 ----- arch/sparc64/mm/tsb.c | 11 +---------- 2 files changed, 1 insertion(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 4893f3e2c33..1af63307b24 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -261,7 +261,6 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t p struct page *page; unsigned long pfn; unsigned long pg_flags; - unsigned long mm_rss; pfn = pte_pfn(pte); if (pfn_valid(pfn) && @@ -285,10 +284,6 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t p } mm = vma->vm_mm; - mm_rss = get_mm_rss(mm); - if (mm_rss >= mm->context.tsb_rss_limit) - tsb_grow(mm, mm_rss, GFP_ATOMIC); - if ((pte_val(pte) & _PAGE_ALL_SZ_BITS) == _PAGE_SZBITS) { struct tsb *tsb; unsigned long tag; diff --git a/arch/sparc64/mm/tsb.c b/arch/sparc64/mm/tsb.c index 787533f0104..2cc8e6528c6 100644 --- a/arch/sparc64/mm/tsb.c +++ b/arch/sparc64/mm/tsb.c @@ -310,7 +310,6 @@ void tsb_grow(struct mm_struct *mm, unsigned long rss, gfp_t gfp_flags) int init_new_context(struct task_struct *tsk, struct mm_struct *mm) { - unsigned long initial_rss; mm->context.sparc64_ctx_val = 0UL; @@ -319,15 +318,7 @@ int init_new_context(struct task_struct *tsk, struct mm_struct *mm) * will be confused and think there is an older TSB to free up. */ mm->context.tsb = NULL; - - /* If this is fork, inherit the parent's TSB size. We would - * grow it to that size on the first page fault anyways. - */ - initial_rss = mm->context.tsb_nentries; - if (initial_rss) - initial_rss -= 1; - - tsb_grow(mm, initial_rss, GFP_KERNEL); + tsb_grow(mm, 0, GFP_KERNEL); if (unlikely(!mm->context.tsb)) return -ENOMEM; -- cgit v1.2.3-18-g5258 From 92704a1c63c3b481870d02636d0b5a70c7e21cd1 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 26 Feb 2006 23:27:19 -0800 Subject: [SPARC64]: Refine code sequences to get the cpu id. On uniprocessor, it's always zero for optimize that. On SMP, the jmpl to the stub kills the return address stack in the cpu branch prediction logic, so expand the code sequence inline and use a code patching section to fix things up. This also always better and explicit register selection, which will be taken advantage of in a future changeset. The hard_smp_processor_id() function is big, so do not inline it. Fix up tests for Jalapeno to also test for Serrano chips too. These tests want "jbus Ultra-IIIi" cases to match, so that is what we should test for. Signed-off-by: David S. Miller --- arch/sparc64/kernel/entry.S | 84 +++------------------------------------ arch/sparc64/kernel/irq.c | 4 +- arch/sparc64/kernel/setup.c | 56 +++++++++++++++++++++++++- arch/sparc64/kernel/smp.c | 9 +++-- arch/sparc64/kernel/traps.c | 4 +- arch/sparc64/kernel/vmlinux.lds.S | 3 ++ 6 files changed, 73 insertions(+), 87 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S index 563fa4ec33f..b3511ff5d04 100644 --- a/arch/sparc64/kernel/entry.S +++ b/arch/sparc64/kernel/entry.S @@ -1628,84 +1628,10 @@ __flushw_user: 2: retl nop - /* Read cpu ID from hardware, return in %g6. - * (callers_pc - 4) is in %g1. Patched at boot time. - * - * Default is spitfire implementation. - * - * The instruction sequence needs to be 5 instructions - * in order to fit the longest implementation, which is - * currently starfire. - */ - .align 32 - .globl __get_cpu_id -__get_cpu_id: - ldxa [%g0] ASI_UPA_CONFIG, %g6 - srlx %g6, 17, %g6 - jmpl %g1 + 0x4, %g0 - and %g6, 0x1f, %g6 - nop - -__get_cpu_id_cheetah_safari: - ldxa [%g0] ASI_SAFARI_CONFIG, %g6 - srlx %g6, 17, %g6 - jmpl %g1 + 0x4, %g0 - and %g6, 0x3ff, %g6 - nop - -__get_cpu_id_cheetah_jbus: - ldxa [%g0] ASI_JBUS_CONFIG, %g6 - srlx %g6, 17, %g6 - jmpl %g1 + 0x4, %g0 - and %g6, 0x1f, %g6 - nop - -__get_cpu_id_starfire: - sethi %hi(0x1fff40000d0 >> 9), %g6 - sllx %g6, 9, %g6 - or %g6, 0xd0, %g6 - jmpl %g1 + 0x4, %g0 - lduwa [%g6] ASI_PHYS_BYPASS_EC_E, %g6 - - .globl per_cpu_patch -per_cpu_patch: - sethi %hi(this_is_starfire), %o0 - lduw [%o0 + %lo(this_is_starfire)], %o1 - sethi %hi(__get_cpu_id_starfire), %o0 - brnz,pn %o1, 10f - or %o0, %lo(__get_cpu_id_starfire), %o0 - sethi %hi(tlb_type), %o0 - lduw [%o0 + %lo(tlb_type)], %o1 - brz,pt %o1, 11f - nop - rdpr %ver, %o0 - srlx %o0, 32, %o0 - sethi %hi(0x003e0016), %o1 - or %o1, %lo(0x003e0016), %o1 - cmp %o0, %o1 - sethi %hi(__get_cpu_id_cheetah_jbus), %o0 - be,pn %icc, 10f - or %o0, %lo(__get_cpu_id_cheetah_jbus), %o0 - sethi %hi(__get_cpu_id_cheetah_safari), %o0 - or %o0, %lo(__get_cpu_id_cheetah_safari), %o0 -10: - sethi %hi(__get_cpu_id), %o1 - or %o1, %lo(__get_cpu_id), %o1 - lduw [%o0 + 0x00], %o2 - stw %o2, [%o1 + 0x00] - flush %o1 + 0x00 - lduw [%o0 + 0x04], %o2 - stw %o2, [%o1 + 0x04] - flush %o1 + 0x04 - lduw [%o0 + 0x08], %o2 - stw %o2, [%o1 + 0x08] - flush %o1 + 0x08 - lduw [%o0 + 0x0c], %o2 - stw %o2, [%o1 + 0x0c] - flush %o1 + 0x0c - lduw [%o0 + 0x10], %o2 - stw %o2, [%o1 + 0x10] - flush %o1 + 0x10 -11: +#ifdef CONFIG_SMP + .globl hard_smp_processor_id +hard_smp_processor_id: + __GET_CPUID(%o0) retl nop +#endif diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index 3e48af2769d..d069a6feb53 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -39,6 +39,7 @@ #include #include #include +#include #ifdef CONFIG_SMP static void distribute_irqs(void); @@ -153,7 +154,8 @@ void enable_irq(unsigned int irq) unsigned long ver; __asm__ ("rdpr %%ver, %0" : "=r" (ver)); - if ((ver >> 32) == 0x003e0016) { + if ((ver >> 32) == __JALAPENO_ID || + (ver >> 32) == __SERRANO_ID) { /* We set it to our JBUS ID. */ __asm__ __volatile__("ldxa [%%g0] %1, %0" : "=r" (tid) diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index 59a70301a6c..f751d11926b 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -490,6 +490,58 @@ void register_prom_callbacks(void) "' linux-.soft2 to .soft2"); } +static void __init per_cpu_patch(void) +{ +#ifdef CONFIG_SMP + struct cpuid_patch_entry *p; + unsigned long ver; + int is_jbus; + + if (tlb_type == spitfire && !this_is_starfire) + return; + + __asm__ ("rdpr %%ver, %0" : "=r" (ver)); + is_jbus = ((ver >> 32) == __JALAPENO_ID || + (ver >> 32) == __SERRANO_ID); + + p = &__cpuid_patch; + while (p < &__cpuid_patch_end) { + unsigned long addr = p->addr; + unsigned int *insns; + + switch (tlb_type) { + case spitfire: + insns = &p->starfire[0]; + break; + case cheetah: + case cheetah_plus: + if (is_jbus) + insns = &p->cheetah_jbus[0]; + else + insns = &p->cheetah_safari[0]; + break; + default: + prom_printf("Unknown cpu type, halting.\n"); + prom_halt(); + }; + + *(unsigned int *) (addr + 0) = insns[0]; + __asm__ __volatile__("flush %0" : : "r" (addr + 0)); + + *(unsigned int *) (addr + 4) = insns[1]; + __asm__ __volatile__("flush %0" : : "r" (addr + 4)); + + *(unsigned int *) (addr + 8) = insns[2]; + __asm__ __volatile__("flush %0" : : "r" (addr + 8)); + + *(unsigned int *) (addr + 12) = insns[3]; + __asm__ __volatile__("flush %0" : : "r" (addr + 12)); + + p++; + } +#endif +} + void __init setup_arch(char **cmdline_p) { /* Initialize PROM console and command line. */ @@ -507,8 +559,8 @@ void __init setup_arch(char **cmdline_p) /* Work out if we are starfire early on */ check_if_starfire(); - /* Now we know enough to patch the __get_cpu_id() - * trampoline used by trap code. + /* Now we know enough to patch the get_cpuid sequences + * used by trap code. */ per_cpu_patch(); diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 0e7552546d3..16b8eca9754 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -424,7 +424,7 @@ static __inline__ void spitfire_xcall_deliver(u64 data0, u64 data1, u64 data2, c static void cheetah_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mask) { u64 pstate, ver; - int nack_busy_id, is_jalapeno; + int nack_busy_id, is_jbus; if (cpus_empty(mask)) return; @@ -434,7 +434,8 @@ static void cheetah_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mas * derivative processor. */ __asm__ ("rdpr %%ver, %0" : "=r" (ver)); - is_jalapeno = ((ver >> 32) == 0x003e0016); + is_jbus = ((ver >> 32) == __JALAPENO_ID || + (ver >> 32) == __SERRANO_ID); __asm__ __volatile__("rdpr %%pstate, %0" : "=r" (pstate)); @@ -459,7 +460,7 @@ retry: for_each_cpu_mask(i, mask) { u64 target = (i << 14) | 0x70; - if (!is_jalapeno) + if (!is_jbus) target |= (nack_busy_id << 24); __asm__ __volatile__( "stxa %%g0, [%0] %1\n\t" @@ -512,7 +513,7 @@ retry: for_each_cpu_mask(i, mask) { u64 check_mask; - if (is_jalapeno) + if (is_jbus) check_mask = (0x2UL << (2*i)); else check_mask = (0x2UL << diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c index 7e52e897266..1c4744c047a 100644 --- a/arch/sparc64/kernel/traps.c +++ b/arch/sparc64/kernel/traps.c @@ -38,6 +38,7 @@ #include #include #include +#include #ifdef CONFIG_KMOD #include #endif @@ -788,7 +789,8 @@ void __init cheetah_ecache_flush_init(void) cheetah_error_log[i].afsr = CHAFSR_INVALID; __asm__ ("rdpr %%ver, %0" : "=r" (ver)); - if ((ver >> 32) == 0x003e0016) { + if ((ver >> 32) == __JALAPENO_ID || + (ver >> 32) == __SERRANO_ID) { cheetah_error_table = &__jalapeno_error_table[0]; cheetah_afsr_errors = JPAFSR_ERRORS; } else if ((ver >> 32) == 0x003e0015) { diff --git a/arch/sparc64/kernel/vmlinux.lds.S b/arch/sparc64/kernel/vmlinux.lds.S index 71b943f1c9b..1639d9c935c 100644 --- a/arch/sparc64/kernel/vmlinux.lds.S +++ b/arch/sparc64/kernel/vmlinux.lds.S @@ -74,6 +74,9 @@ SECTIONS __tsb_phys_patch = .; .tsb_phys_patch : { *(.tsb_phys_patch) } __tsb_phys_patch_end = .; + __cpuid_patch = .; + .cpuid_patch : { *(.cpuid_patch) } + __cpuid_patch_end = .; . = ALIGN(8192); __initramfs_start = .; .init.ramfs : { *(.init.ramfs) } -- cgit v1.2.3-18-g5258 From ffe483d55229fadbaf4cc7316d47024a24ecd1a2 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 2 Feb 2006 21:55:10 -0800 Subject: [SPARC64]: Add explicit register args to trap state loading macros. This, as well as making the code cleaner, allows a simplification in the TSB miss handling path. Signed-off-by: David S. Miller --- arch/sparc64/kernel/entry.S | 8 ++++---- arch/sparc64/kernel/etrap.S | 10 +++++----- arch/sparc64/kernel/rtrap.S | 2 +- arch/sparc64/kernel/tsb.S | 9 +-------- arch/sparc64/kernel/winfixup.S | 18 +++++++++--------- 5 files changed, 20 insertions(+), 27 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S index b3511ff5d04..4ca3ea0beaf 100644 --- a/arch/sparc64/kernel/entry.S +++ b/arch/sparc64/kernel/entry.S @@ -50,7 +50,7 @@ do_fpdis: add %g0, %g0, %g0 ba,a,pt %xcc, rtrap_clr_l6 -1: TRAP_LOAD_THREAD_REG +1: TRAP_LOAD_THREAD_REG(%g6, %g1) ldub [%g6 + TI_FPSAVED], %g5 wr %g0, FPRS_FEF, %fprs andcc %g5, FPRS_FEF, %g0 @@ -190,7 +190,7 @@ fp_other_bounce: .globl do_fpother_check_fitos .align 32 do_fpother_check_fitos: - TRAP_LOAD_THREAD_REG + TRAP_LOAD_THREAD_REG(%g6, %g1) sethi %hi(fp_other_bounce - 4), %g7 or %g7, %lo(fp_other_bounce - 4), %g7 @@ -378,7 +378,7 @@ do_ivec: sllx %g2, %g4, %g2 sllx %g4, 2, %g4 - TRAP_LOAD_IRQ_WORK + TRAP_LOAD_IRQ_WORK(%g6, %g1) lduw [%g6 + %g4], %g5 /* g5 = irq_work(cpu, pil) */ stw %g5, [%g3 + 0x00] /* bucket->irq_chain = g5 */ @@ -422,7 +422,7 @@ setcc: .globl utrap_trap utrap_trap: /* %g3=handler,%g4=level */ - TRAP_LOAD_THREAD_REG + TRAP_LOAD_THREAD_REG(%g6, %g1) ldx [%g6 + TI_UTRAPS], %g1 brnz,pt %g1, invoke_utrap nop diff --git a/arch/sparc64/kernel/etrap.S b/arch/sparc64/kernel/etrap.S index d974d18b15b..b5f6bc52d91 100644 --- a/arch/sparc64/kernel/etrap.S +++ b/arch/sparc64/kernel/etrap.S @@ -31,7 +31,7 @@ .globl etrap, etrap_irq, etraptl1 etrap: rdpr %pil, %g2 etrap_irq: - TRAP_LOAD_THREAD_REG + TRAP_LOAD_THREAD_REG(%g6, %g1) rdpr %tstate, %g1 sllx %g2, 20, %g3 andcc %g1, TSTATE_PRIV, %g0 @@ -100,7 +100,7 @@ etrap_irq: stx %i7, [%sp + PTREGS_OFF + PT_V9_I7] wrpr %g0, ETRAP_PSTATE2, %pstate mov %l6, %g6 - LOAD_PER_CPU_BASE(%g4, %g3, %l1) + LOAD_PER_CPU_BASE(%g5, %g6, %g4, %g3, %l1) jmpl %l2 + 0x4, %g0 ldx [%g6 + TI_TASK], %g4 @@ -124,7 +124,7 @@ etraptl1: /* Save tstate/tpc/tnpc of TL 1-->4 and the tl register itself. * 0x58 TL4's TT * 0x60 TL */ - TRAP_LOAD_THREAD_REG + TRAP_LOAD_THREAD_REG(%g6, %g1) sub %sp, ((4 * 8) * 4) + 8, %g2 rdpr %tl, %g1 @@ -179,7 +179,7 @@ etraptl1: /* Save tstate/tpc/tnpc of TL 1-->4 and the tl register itself. .align 64 .globl scetrap scetrap: - TRAP_LOAD_THREAD_REG + TRAP_LOAD_THREAD_REG(%g6, %g1) rdpr %pil, %g2 rdpr %tstate, %g1 sllx %g2, 20, %g3 @@ -250,7 +250,7 @@ scetrap: stx %i6, [%sp + PTREGS_OFF + PT_V9_I6] mov %l6, %g6 stx %i7, [%sp + PTREGS_OFF + PT_V9_I7] - LOAD_PER_CPU_BASE(%g4, %g3, %l1) + LOAD_PER_CPU_BASE(%g5, %g6, %g4, %g3, %l1) ldx [%g6 + TI_TASK], %g4 done diff --git a/arch/sparc64/kernel/rtrap.S b/arch/sparc64/kernel/rtrap.S index 64bc03610bc..61bd45e7697 100644 --- a/arch/sparc64/kernel/rtrap.S +++ b/arch/sparc64/kernel/rtrap.S @@ -226,7 +226,7 @@ rt_continue: ldx [%sp + PTREGS_OFF + PT_V9_G1], %g1 brz,pt %l3, 1f nop /* Must do this before thread reg is clobbered below. */ - LOAD_PER_CPU_BASE(%i0, %i1, %i2) + LOAD_PER_CPU_BASE(%g5, %g6, %i0, %i1, %i2) 1: ldx [%sp + PTREGS_OFF + PT_V9_G6], %g6 ldx [%sp + PTREGS_OFF + PT_V9_G7], %g7 diff --git a/arch/sparc64/kernel/tsb.S b/arch/sparc64/kernel/tsb.S index ff6a79beb98..28e38b168dd 100644 --- a/arch/sparc64/kernel/tsb.S +++ b/arch/sparc64/kernel/tsb.S @@ -36,14 +36,7 @@ tsb_miss_itlb: nop tsb_miss_page_table_walk: - /* This clobbers %g1 and %g6, preserve them... */ - mov %g1, %g5 - mov %g6, %g2 - - TRAP_LOAD_PGD_PHYS - - mov %g2, %g6 - mov %g5, %g1 + TRAP_LOAD_PGD_PHYS(%g7, %g5) USER_PGTABLE_WALK_TL1(%g4, %g7, %g5, %g2, tsb_do_fault) diff --git a/arch/sparc64/kernel/winfixup.S b/arch/sparc64/kernel/winfixup.S index 320a762d051..211021ae6e8 100644 --- a/arch/sparc64/kernel/winfixup.S +++ b/arch/sparc64/kernel/winfixup.S @@ -40,7 +40,7 @@ set_pcontext: */ .globl fill_fixup, spill_fixup fill_fixup: - TRAP_LOAD_THREAD_REG + TRAP_LOAD_THREAD_REG(%g6, %g1) rdpr %tstate, %g1 andcc %g1, TSTATE_PRIV, %g0 or %g4, FAULT_CODE_WINFIXUP, %g4 @@ -86,7 +86,7 @@ fill_fixup: wrpr %l1, (PSTATE_IE | PSTATE_AG | PSTATE_RMO), %pstate mov %o7, %g6 ldx [%g6 + TI_TASK], %g4 - LOAD_PER_CPU_BASE(%g1, %g2, %g3) + LOAD_PER_CPU_BASE(%g5, %g6, %g1, %g2, %g3) /* This is the same as below, except we handle this a bit special * since we must preserve %l5 and %l6, see comment above. @@ -105,7 +105,7 @@ fill_fixup: * do not touch %g7 or %g2 so we handle the two cases fine. */ spill_fixup: - TRAP_LOAD_THREAD_REG + TRAP_LOAD_THREAD_REG(%g6, %g1) ldx [%g6 + TI_FLAGS], %g1 andcc %g1, _TIF_32BIT, %g0 ldub [%g6 + TI_WSAVED], %g1 @@ -181,7 +181,7 @@ winfix_mna: wrpr %g3, %tnpc done fill_fixup_mna: - TRAP_LOAD_THREAD_REG + TRAP_LOAD_THREAD_REG(%g6, %g1) rdpr %tstate, %g1 andcc %g1, TSTATE_PRIV, %g0 be,pt %xcc, window_mna_from_user_common @@ -209,14 +209,14 @@ fill_fixup_mna: wrpr %l1, (PSTATE_IE | PSTATE_AG | PSTATE_RMO), %pstate mov %o7, %g6 ! Get current back. ldx [%g6 + TI_TASK], %g4 ! Finish it. - LOAD_PER_CPU_BASE(%g1, %g2, %g3) + LOAD_PER_CPU_BASE(%g5, %g6, %g1, %g2, %g3) call mem_address_unaligned add %sp, PTREGS_OFF, %o0 b,pt %xcc, rtrap nop ! yes, the nop is correct spill_fixup_mna: - TRAP_LOAD_THREAD_REG + TRAP_LOAD_THREAD_REG(%g6, %g1) ldx [%g6 + TI_FLAGS], %g1 andcc %g1, _TIF_32BIT, %g0 ldub [%g6 + TI_WSAVED], %g1 @@ -284,7 +284,7 @@ winfix_dax: wrpr %g3, %tnpc done fill_fixup_dax: - TRAP_LOAD_THREAD_REG + TRAP_LOAD_THREAD_REG(%g6, %g1) rdpr %tstate, %g1 andcc %g1, TSTATE_PRIV, %g0 be,pt %xcc, window_dax_from_user_common @@ -312,14 +312,14 @@ fill_fixup_dax: wrpr %l1, (PSTATE_IE | PSTATE_AG | PSTATE_RMO), %pstate mov %o7, %g6 ! Get current back. ldx [%g6 + TI_TASK], %g4 ! Finish it. - LOAD_PER_CPU_BASE(%g1, %g2, %g3) + LOAD_PER_CPU_BASE(%g5, %g6, %g1, %g2, %g3) call spitfire_data_access_exception add %sp, PTREGS_OFF, %o0 b,pt %xcc, rtrap nop ! yes, the nop is correct spill_fixup_dax: - TRAP_LOAD_THREAD_REG + TRAP_LOAD_THREAD_REG(%g6, %g1) ldx [%g6 + TI_FLAGS], %g1 andcc %g1, _TIF_32BIT, %g0 ldub [%g6 + TI_WSAVED], %g1 -- cgit v1.2.3-18-g5258 From 314ef6859750b6539eac48d78059bb7986f29cb1 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 4 Feb 2006 00:10:01 -0800 Subject: [SPARC64]: Refine register window trap handling. When saving and restoing trap state, do the window spill/fill handling inline so that we never trap deeper than 2 trap levels. This is important for chips like Niagara. The window fixup code is massively simplified, and many more improvements are now possible. Signed-off-by: David S. Miller --- arch/sparc64/kernel/etrap.S | 104 +++------- arch/sparc64/kernel/process.c | 20 +- arch/sparc64/kernel/rtrap.S | 58 +++++- arch/sparc64/kernel/tsb.S | 1 - arch/sparc64/kernel/ttable.S | 16 +- arch/sparc64/kernel/winfixup.S | 454 ++++++++++------------------------------- 6 files changed, 214 insertions(+), 439 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/etrap.S b/arch/sparc64/kernel/etrap.S index b5f6bc52d91..4a0e01b1404 100644 --- a/arch/sparc64/kernel/etrap.S +++ b/arch/sparc64/kernel/etrap.S @@ -55,7 +55,31 @@ etrap_irq: rd %y, %g3 stx %g1, [%g2 + STACKFRAME_SZ + PT_V9_TNPC] st %g3, [%g2 + STACKFRAME_SZ + PT_V9_Y] - save %g2, -STACK_BIAS, %sp ! Ordering here is critical + + rdpr %cansave, %g1 + brnz,pt %g1, etrap_save + nop + + rdpr %cwp, %g1 + add %g1, 2, %g1 + wrpr %g1, %cwp + be,pt %xcc, etrap_user_spill + mov ASI_AIUP, %g3 + + rdpr %otherwin, %g3 + brz %g3, etrap_kernel_spill + mov ASI_AIUS, %g3 + +etrap_user_spill: + + wr %g3, 0x0, %asi + ldx [%g6 + TI_FLAGS], %g3 + and %g3, _TIF_32BIT, %g3 + brnz,pt %g3, etrap_user_spill_32bit + nop + ba,a,pt %xcc, etrap_user_spill_64bit + +etrap_save: save %g2, -STACK_BIAS, %sp mov %g6, %l6 bne,pn %xcc, 3f @@ -176,83 +200,5 @@ etraptl1: /* Save tstate/tpc/tnpc of TL 1-->4 and the tl register itself. ba,pt %xcc, 1b andcc %g1, TSTATE_PRIV, %g0 - .align 64 - .globl scetrap -scetrap: - TRAP_LOAD_THREAD_REG(%g6, %g1) - rdpr %pil, %g2 - rdpr %tstate, %g1 - sllx %g2, 20, %g3 - andcc %g1, TSTATE_PRIV, %g0 - or %g1, %g3, %g1 - bne,pn %xcc, 1f - sub %sp, (STACKFRAME_SZ+TRACEREG_SZ-STACK_BIAS), %g2 - wrpr %g0, 7, %cleanwin - - sllx %g1, 51, %g3 - sethi %hi(TASK_REGOFF), %g2 - or %g2, %lo(TASK_REGOFF), %g2 - brlz,pn %g3, 1f - add %g6, %g2, %g2 - wr %g0, 0, %fprs -1: rdpr %tpc, %g3 - stx %g1, [%g2 + STACKFRAME_SZ + PT_V9_TSTATE] - - rdpr %tnpc, %g1 - stx %g3, [%g2 + STACKFRAME_SZ + PT_V9_TPC] - stx %g1, [%g2 + STACKFRAME_SZ + PT_V9_TNPC] - save %g2, -STACK_BIAS, %sp ! Ordering here is critical - mov %g6, %l6 - bne,pn %xcc, 2f - mov ASI_P, %l7 - rdpr %canrestore, %g3 - - rdpr %wstate, %g2 - wrpr %g0, 0, %canrestore - sll %g2, 3, %g2 - mov PRIMARY_CONTEXT, %l4 - wrpr %g3, 0, %otherwin - wrpr %g2, 0, %wstate - sethi %hi(sparc64_kern_pri_context), %g2 - ldx [%g2 + %lo(sparc64_kern_pri_context)], %g3 - stxa %g3, [%l4] ASI_DMMU - sethi %hi(KERNBASE), %l4 - flush %l4 - - mov ASI_AIUS, %l7 -2: mov %g4, %l4 - mov %g5, %l5 - add %g7, 0x4, %l2 - wrpr %g0, ETRAP_PSTATE1, %pstate - stx %g1, [%sp + PTREGS_OFF + PT_V9_G1] - stx %g2, [%sp + PTREGS_OFF + PT_V9_G2] - sllx %l7, 24, %l7 - - stx %g3, [%sp + PTREGS_OFF + PT_V9_G3] - rdpr %cwp, %l0 - stx %g4, [%sp + PTREGS_OFF + PT_V9_G4] - stx %g5, [%sp + PTREGS_OFF + PT_V9_G5] - stx %g6, [%sp + PTREGS_OFF + PT_V9_G6] - stx %g7, [%sp + PTREGS_OFF + PT_V9_G7] - or %l7, %l0, %l7 - sethi %hi(TSTATE_RMO | TSTATE_PEF), %l0 - - or %l7, %l0, %l7 - wrpr %l2, %tnpc - wrpr %l7, (TSTATE_PRIV | TSTATE_IE), %tstate - stx %i0, [%sp + PTREGS_OFF + PT_V9_I0] - stx %i1, [%sp + PTREGS_OFF + PT_V9_I1] - stx %i2, [%sp + PTREGS_OFF + PT_V9_I2] - stx %i3, [%sp + PTREGS_OFF + PT_V9_I3] - stx %i4, [%sp + PTREGS_OFF + PT_V9_I4] - - stx %i5, [%sp + PTREGS_OFF + PT_V9_I5] - stx %i6, [%sp + PTREGS_OFF + PT_V9_I6] - mov %l6, %g6 - stx %i7, [%sp + PTREGS_OFF + PT_V9_I7] - LOAD_PER_CPU_BASE(%g5, %g6, %g4, %g3, %l1) - ldx [%g6 + TI_TASK], %g4 - done - #undef TASK_REGOFF #undef ETRAP_PSTATE1 diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c index 26548fc604b..803eea4dc4f 100644 --- a/arch/sparc64/kernel/process.c +++ b/arch/sparc64/kernel/process.c @@ -541,6 +541,18 @@ void synchronize_user_stack(void) } } +static void stack_unaligned(unsigned long sp) +{ + siginfo_t info; + + info.si_signo = SIGBUS; + info.si_errno = 0; + info.si_code = BUS_ADRALN; + info.si_addr = (void __user *) sp; + info.si_trapno = 0; + force_sig_info(SIGBUS, &info, current); +} + void fault_in_user_windows(void) { struct thread_info *t = current_thread_info(); @@ -556,13 +568,17 @@ void fault_in_user_windows(void) flush_user_windows(); window = get_thread_wsaved(); - if (window != 0) { + if (likely(window != 0)) { window -= 1; do { unsigned long sp = (t->rwbuf_stkptrs[window] + bias); struct reg_window *rwin = &t->reg_window[window]; - if (copy_to_user((char __user *)sp, rwin, winsize)) + if (unlikely(sp & 0x7UL)) + stack_unaligned(sp); + + if (unlikely(copy_to_user((char __user *)sp, + rwin, winsize))) goto barf; } while (window--); } diff --git a/arch/sparc64/kernel/rtrap.S b/arch/sparc64/kernel/rtrap.S index 61bd45e7697..ecfbbdc5612 100644 --- a/arch/sparc64/kernel/rtrap.S +++ b/arch/sparc64/kernel/rtrap.S @@ -267,15 +267,69 @@ rt_continue: ldx [%sp + PTREGS_OFF + PT_V9_G1], %g1 wrpr %l2, %g0, %canrestore wrpr %l1, %g0, %wstate - wrpr %g0, %g0, %otherwin + brnz,pt %l2, user_rtt_restore + wrpr %g0, %g0, %otherwin + + ldx [%g6 + TI_FLAGS], %g3 + wr %g0, ASI_AIUP, %asi + rdpr %cwp, %g1 + andcc %g3, _TIF_32BIT, %g0 + sub %g1, 1, %g1 + bne,pt %xcc, user_rtt_fill_32bit + wrpr %g1, %cwp + ba,a,pt %xcc, user_rtt_fill_64bit + +user_rtt_fill_fixup: + rdpr %cwp, %g1 + add %g1, 1, %g1 + wrpr %g1, 0x0, %cwp + + rdpr %wstate, %g2 + sll %g2, 3, %g2 + wrpr %g2, 0x0, %wstate + + /* We know %canrestore and %otherwin are both zero. */ + + sethi %hi(sparc64_kern_pri_context), %g2 + ldx [%g2 + %lo(sparc64_kern_pri_context)], %g2 + mov PRIMARY_CONTEXT, %g1 + stxa %g2, [%g1] ASI_DMMU + sethi %hi(KERNBASE), %g1 + flush %g1 + + or %g4, FAULT_CODE_WINFIXUP, %g4 + stb %g4, [%g6 + TI_FAULT_CODE] + stx %g5, [%g6 + TI_FAULT_ADDR] + + mov %g6, %l1 + wrpr %g0, 0x0, %tl + wrpr %g0, RTRAP_PSTATE, %pstate + mov %l1, %g6 + ldx [%g6 + TI_TASK], %g4 + LOAD_PER_CPU_BASE(%g5, %g6, %g1, %g2, %g3) + call do_sparc64_fault + add %sp, PTREGS_OFF, %o0 + ba,pt %xcc, rtrap + nop + +user_rtt_pre_restore: + add %g1, 1, %g1 + wrpr %g1, 0x0, %cwp + +user_rtt_restore: restore rdpr %canrestore, %g1 wrpr %g1, 0x0, %cleanwin retry nop -kern_rtt: restore +kern_rtt: rdpr %canrestore, %g1 + brz,pn %g1, kern_rtt_fill + nop +kern_rtt_restore: + restore retry + to_kernel: #ifdef CONFIG_PREEMPT ldsw [%g6 + TI_PRE_COUNT], %l5 diff --git a/arch/sparc64/kernel/tsb.S b/arch/sparc64/kernel/tsb.S index 28e38b168dd..3b45db98005 100644 --- a/arch/sparc64/kernel/tsb.S +++ b/arch/sparc64/kernel/tsb.S @@ -115,7 +115,6 @@ sparc64_realfault_common: ba,pt %xcc, rtrap_clr_l6 ! Restore cpu state nop ! Delay slot (fill me) - .globl winfix_trampoline winfix_trampoline: rdpr %tpc, %g3 ! Prepare winfixup TNPC or %g3, 0x7c, %g3 ! Compute branch offset diff --git a/arch/sparc64/kernel/ttable.S b/arch/sparc64/kernel/ttable.S index 99531424c59..2679b6e253a 100644 --- a/arch/sparc64/kernel/ttable.S +++ b/arch/sparc64/kernel/ttable.S @@ -92,11 +92,11 @@ tl0_resv07c: BTRAP(0x7c) BTRAP(0x7d) BTRAP(0x7e) BTRAP(0x7f) tl0_s0n: SPILL_0_NORMAL tl0_s1n: SPILL_1_NORMAL tl0_s2n: SPILL_2_NORMAL -tl0_s3n: SPILL_3_NORMAL -tl0_s4n: SPILL_4_NORMAL -tl0_s5n: SPILL_5_NORMAL -tl0_s6n: SPILL_6_NORMAL -tl0_s7n: SPILL_7_NORMAL +tl0_s3n: SPILL_0_NORMAL_ETRAP +tl0_s4n: SPILL_1_GENERIC_ETRAP +tl0_s5n: SPILL_1_GENERIC_ETRAP_FIXUP +tl0_s6n: SPILL_2_GENERIC_ETRAP +tl0_s7n: SPILL_2_GENERIC_ETRAP_FIXUP tl0_s0o: SPILL_0_OTHER tl0_s1o: SPILL_1_OTHER tl0_s2o: SPILL_2_OTHER @@ -110,9 +110,9 @@ tl0_f1n: FILL_1_NORMAL tl0_f2n: FILL_2_NORMAL tl0_f3n: FILL_3_NORMAL tl0_f4n: FILL_4_NORMAL -tl0_f5n: FILL_5_NORMAL -tl0_f6n: FILL_6_NORMAL -tl0_f7n: FILL_7_NORMAL +tl0_f5n: FILL_0_NORMAL_RTRAP +tl0_f6n: FILL_1_GENERIC_RTRAP +tl0_f7n: FILL_2_GENERIC_RTRAP tl0_f0o: FILL_0_OTHER tl0_f1o: FILL_1_OTHER tl0_f2o: FILL_2_OTHER diff --git a/arch/sparc64/kernel/winfixup.S b/arch/sparc64/kernel/winfixup.S index 211021ae6e8..efe2770e8f5 100644 --- a/arch/sparc64/kernel/winfixup.S +++ b/arch/sparc64/kernel/winfixup.S @@ -1,8 +1,6 @@ -/* $Id: winfixup.S,v 1.30 2002/02/09 19:49:30 davem Exp $ +/* winfixup.S: Handle cases where user stack pointer is found to be bogus. * - * winfixup.S: Handle cases where user stack pointer is found to be bogus. - * - * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu) + * Copyright (C) 1997, 2006 David S. Miller (davem@davemloft.net) */ #include @@ -15,367 +13,129 @@ .text -set_pcontext: - sethi %hi(sparc64_kern_pri_context), %l1 - ldx [%l1 + %lo(sparc64_kern_pri_context)], %l1 - mov PRIMARY_CONTEXT, %g1 - stxa %l1, [%g1] ASI_DMMU - sethi %hi(KERNBASE), %l1 - flush %l1 - retl - nop + /* It used to be the case that these register window fault + * handlers could run via the save and restore instructions + * done by the trap entry and exit code. They now do the + * window spill/fill by hand, so that case no longer can occur. + */ .align 32 - - /* Here are the rules, pay attention. - * - * The kernel is disallowed from touching user space while - * the trap level is greater than zero, except for from within - * the window spill/fill handlers. This must be followed - * so that we can easily detect the case where we tried to - * spill/fill with a bogus (or unmapped) user stack pointer. - * - * These are layed out in a special way for cache reasons, - * don't touch... - */ - .globl fill_fixup, spill_fixup fill_fixup: TRAP_LOAD_THREAD_REG(%g6, %g1) - rdpr %tstate, %g1 - andcc %g1, TSTATE_PRIV, %g0 - or %g4, FAULT_CODE_WINFIXUP, %g4 - be,pt %xcc, window_scheisse_from_user_common - and %g1, TSTATE_CWP, %g1 - - /* This is the extremely complex case, but it does happen from - * time to time if things are just right. Essentially the restore - * done in rtrap right before going back to user mode, with tl=1 - * and that levels trap stack registers all setup, took a fill trap, - * the user stack was not mapped in the tlb, and tlb miss occurred, - * the pte found was not valid, and a simple ref bit watch update - * could not satisfy the miss, so we got here. - * - * We must carefully unwind the state so we get back to tl=0, preserve - * all the register values we were going to give to the user. Luckily - * most things are where they need to be, we also have the address - * which triggered the fault handy as well. - * - * Also note that we must preserve %l5 and %l6. If the user was - * returning from a system call, we must make it look this way - * after we process the fill fault on the users stack. - * - * First, get into the window where the original restore was executed. - */ - - rdpr %wstate, %g2 ! Grab user mode wstate. - wrpr %g1, %cwp ! Get into the right window. - sll %g2, 3, %g2 ! NORMAL-->OTHER - - wrpr %g0, 0x0, %canrestore ! Standard etrap stuff. - wrpr %g2, 0x0, %wstate ! This must be consistent. - wrpr %g0, 0x0, %otherwin ! We know this. - call set_pcontext ! Change contexts... + rdpr %tstate, %g1 + and %g1, TSTATE_CWP, %g1 + or %g4, FAULT_CODE_WINFIXUP, %g4 + stb %g4, [%g6 + TI_FAULT_CODE] + stx %g5, [%g6 + TI_FAULT_ADDR] + wrpr %g1, %cwp + ba,pt %xcc, etrap + rd %pc, %g7 + call do_sparc64_fault + add %sp, PTREGS_OFF, %o0 + ba,pt %xcc, rtrap_clr_l6 nop - rdpr %pstate, %l1 ! Prepare to change globals. - mov %g6, %o7 ! Get current. - - andn %l1, PSTATE_MM, %l1 ! We want to be in RMO - stb %g4, [%g6 + TI_FAULT_CODE] - stx %g5, [%g6 + TI_FAULT_ADDR] - wrpr %g0, 0x0, %tl ! Out of trap levels. - wrpr %l1, (PSTATE_IE | PSTATE_AG | PSTATE_RMO), %pstate - mov %o7, %g6 - ldx [%g6 + TI_TASK], %g4 - LOAD_PER_CPU_BASE(%g5, %g6, %g1, %g2, %g3) - /* This is the same as below, except we handle this a bit special - * since we must preserve %l5 and %l6, see comment above. - */ - call do_sparc64_fault - add %sp, PTREGS_OFF, %o0 - ba,pt %xcc, rtrap - nop ! yes, nop is correct - - /* Be very careful about usage of the alternate globals here. - * You cannot touch %g4/%g5 as that has the fault information - * should this be from usermode. Also be careful for the case - * where we get here from the save instruction in etrap.S when - * coming from either user or kernel (does not matter which, it - * is the same problem in both cases). Essentially this means - * do not touch %g7 or %g2 so we handle the two cases fine. + /* Be very careful about usage of the trap globals here. + * You cannot touch %g5 as that has the fault information. */ spill_fixup: +spill_fixup_mna: +spill_fixup_dax: TRAP_LOAD_THREAD_REG(%g6, %g1) - ldx [%g6 + TI_FLAGS], %g1 - andcc %g1, _TIF_32BIT, %g0 - ldub [%g6 + TI_WSAVED], %g1 - - sll %g1, 3, %g3 - add %g6, %g3, %g3 - stx %sp, [%g3 + TI_RWIN_SPTRS] - sll %g1, 7, %g3 - bne,pt %xcc, 1f - add %g6, %g3, %g3 - stx %l0, [%g3 + TI_REG_WINDOW + 0x00] - stx %l1, [%g3 + TI_REG_WINDOW + 0x08] - - stx %l2, [%g3 + TI_REG_WINDOW + 0x10] - stx %l3, [%g3 + TI_REG_WINDOW + 0x18] - stx %l4, [%g3 + TI_REG_WINDOW + 0x20] - stx %l5, [%g3 + TI_REG_WINDOW + 0x28] - stx %l6, [%g3 + TI_REG_WINDOW + 0x30] - stx %l7, [%g3 + TI_REG_WINDOW + 0x38] - stx %i0, [%g3 + TI_REG_WINDOW + 0x40] - stx %i1, [%g3 + TI_REG_WINDOW + 0x48] - - stx %i2, [%g3 + TI_REG_WINDOW + 0x50] - stx %i3, [%g3 + TI_REG_WINDOW + 0x58] - stx %i4, [%g3 + TI_REG_WINDOW + 0x60] - stx %i5, [%g3 + TI_REG_WINDOW + 0x68] - stx %i6, [%g3 + TI_REG_WINDOW + 0x70] - b,pt %xcc, 2f - stx %i7, [%g3 + TI_REG_WINDOW + 0x78] -1: stw %l0, [%g3 + TI_REG_WINDOW + 0x00] - - stw %l1, [%g3 + TI_REG_WINDOW + 0x04] - stw %l2, [%g3 + TI_REG_WINDOW + 0x08] - stw %l3, [%g3 + TI_REG_WINDOW + 0x0c] - stw %l4, [%g3 + TI_REG_WINDOW + 0x10] - stw %l5, [%g3 + TI_REG_WINDOW + 0x14] - stw %l6, [%g3 + TI_REG_WINDOW + 0x18] - stw %l7, [%g3 + TI_REG_WINDOW + 0x1c] - stw %i0, [%g3 + TI_REG_WINDOW + 0x20] - - stw %i1, [%g3 + TI_REG_WINDOW + 0x24] - stw %i2, [%g3 + TI_REG_WINDOW + 0x28] - stw %i3, [%g3 + TI_REG_WINDOW + 0x2c] - stw %i4, [%g3 + TI_REG_WINDOW + 0x30] - stw %i5, [%g3 + TI_REG_WINDOW + 0x34] - stw %i6, [%g3 + TI_REG_WINDOW + 0x38] - stw %i7, [%g3 + TI_REG_WINDOW + 0x3c] -2: add %g1, 1, %g1 - - stb %g1, [%g6 + TI_WSAVED] - rdpr %tstate, %g1 - andcc %g1, TSTATE_PRIV, %g0 + ldx [%g6 + TI_FLAGS], %g1 + andcc %g1, _TIF_32BIT, %g0 + ldub [%g6 + TI_WSAVED], %g1 + sll %g1, 3, %g3 + add %g6, %g3, %g3 + stx %sp, [%g3 + TI_RWIN_SPTRS] + sll %g1, 7, %g3 + bne,pt %xcc, 1f + add %g6, %g3, %g3 + stx %l0, [%g3 + TI_REG_WINDOW + 0x00] + stx %l1, [%g3 + TI_REG_WINDOW + 0x08] + stx %l2, [%g3 + TI_REG_WINDOW + 0x10] + stx %l3, [%g3 + TI_REG_WINDOW + 0x18] + stx %l4, [%g3 + TI_REG_WINDOW + 0x20] + stx %l5, [%g3 + TI_REG_WINDOW + 0x28] + stx %l6, [%g3 + TI_REG_WINDOW + 0x30] + stx %l7, [%g3 + TI_REG_WINDOW + 0x38] + stx %i0, [%g3 + TI_REG_WINDOW + 0x40] + stx %i1, [%g3 + TI_REG_WINDOW + 0x48] + stx %i2, [%g3 + TI_REG_WINDOW + 0x50] + stx %i3, [%g3 + TI_REG_WINDOW + 0x58] + stx %i4, [%g3 + TI_REG_WINDOW + 0x60] + stx %i5, [%g3 + TI_REG_WINDOW + 0x68] + stx %i6, [%g3 + TI_REG_WINDOW + 0x70] + ba,pt %xcc, 2f + stx %i7, [%g3 + TI_REG_WINDOW + 0x78] +1: stw %l0, [%g3 + TI_REG_WINDOW + 0x00] + stw %l1, [%g3 + TI_REG_WINDOW + 0x04] + stw %l2, [%g3 + TI_REG_WINDOW + 0x08] + stw %l3, [%g3 + TI_REG_WINDOW + 0x0c] + stw %l4, [%g3 + TI_REG_WINDOW + 0x10] + stw %l5, [%g3 + TI_REG_WINDOW + 0x14] + stw %l6, [%g3 + TI_REG_WINDOW + 0x18] + stw %l7, [%g3 + TI_REG_WINDOW + 0x1c] + stw %i0, [%g3 + TI_REG_WINDOW + 0x20] + stw %i1, [%g3 + TI_REG_WINDOW + 0x24] + stw %i2, [%g3 + TI_REG_WINDOW + 0x28] + stw %i3, [%g3 + TI_REG_WINDOW + 0x2c] + stw %i4, [%g3 + TI_REG_WINDOW + 0x30] + stw %i5, [%g3 + TI_REG_WINDOW + 0x34] + stw %i6, [%g3 + TI_REG_WINDOW + 0x38] + stw %i7, [%g3 + TI_REG_WINDOW + 0x3c] +2: add %g1, 1, %g1 + stb %g1, [%g6 + TI_WSAVED] + rdpr %tstate, %g1 + andcc %g1, TSTATE_PRIV, %g0 saved - and %g1, TSTATE_CWP, %g1 - be,a,pn %xcc, window_scheisse_from_user_common - mov FAULT_CODE_WRITE | FAULT_CODE_DTLB | FAULT_CODE_WINFIXUP, %g4 + be,pn %xcc, 1f + and %g1, TSTATE_CWP, %g1 retry +1: mov FAULT_CODE_WRITE | FAULT_CODE_DTLB | FAULT_CODE_WINFIXUP, %g4 + stb %g4, [%g6 + TI_FAULT_CODE] + stx %g5, [%g6 + TI_FAULT_ADDR] + wrpr %g1, %cwp + ba,pt %xcc, etrap + rd %pc, %g7 + call do_sparc64_fault + add %sp, PTREGS_OFF, %o0 + ba,a,pt %xcc, rtrap_clr_l6 -window_scheisse_from_user_common: - stb %g4, [%g6 + TI_FAULT_CODE] - stx %g5, [%g6 + TI_FAULT_ADDR] - wrpr %g1, %cwp - ba,pt %xcc, etrap - rd %pc, %g7 - call do_sparc64_fault - add %sp, PTREGS_OFF, %o0 - ba,a,pt %xcc, rtrap_clr_l6 - - .globl winfix_mna, fill_fixup_mna, spill_fixup_mna winfix_mna: - andn %g3, 0x7f, %g3 - add %g3, 0x78, %g3 - wrpr %g3, %tnpc + andn %g3, 0x7f, %g3 + add %g3, 0x78, %g3 + wrpr %g3, %tnpc done -fill_fixup_mna: - TRAP_LOAD_THREAD_REG(%g6, %g1) - rdpr %tstate, %g1 - andcc %g1, TSTATE_PRIV, %g0 - be,pt %xcc, window_mna_from_user_common - and %g1, TSTATE_CWP, %g1 - - /* Please, see fill_fixup commentary about why we must preserve - * %l5 and %l6 to preserve absolute correct semantics. - */ - rdpr %wstate, %g2 ! Grab user mode wstate. - wrpr %g1, %cwp ! Get into the right window. - sll %g2, 3, %g2 ! NORMAL-->OTHER - wrpr %g0, 0x0, %canrestore ! Standard etrap stuff. - - wrpr %g2, 0x0, %wstate ! This must be consistent. - wrpr %g0, 0x0, %otherwin ! We know this. - call set_pcontext ! Change contexts... - nop - rdpr %pstate, %l1 ! Prepare to change globals. - mov %g4, %o2 ! Setup args for - mov %g5, %o1 ! final call to mem_address_unaligned. - andn %l1, PSTATE_MM, %l1 ! We want to be in RMO - - mov %g6, %o7 ! Stash away current. - wrpr %g0, 0x0, %tl ! Out of trap levels. - wrpr %l1, (PSTATE_IE | PSTATE_AG | PSTATE_RMO), %pstate - mov %o7, %g6 ! Get current back. - ldx [%g6 + TI_TASK], %g4 ! Finish it. - LOAD_PER_CPU_BASE(%g5, %g6, %g1, %g2, %g3) - call mem_address_unaligned - add %sp, PTREGS_OFF, %o0 - b,pt %xcc, rtrap - nop ! yes, the nop is correct -spill_fixup_mna: +fill_fixup_mna: TRAP_LOAD_THREAD_REG(%g6, %g1) - ldx [%g6 + TI_FLAGS], %g1 - andcc %g1, _TIF_32BIT, %g0 - ldub [%g6 + TI_WSAVED], %g1 - sll %g1, 3, %g3 - add %g6, %g3, %g3 - stx %sp, [%g3 + TI_RWIN_SPTRS] - - sll %g1, 7, %g3 - bne,pt %xcc, 1f - add %g6, %g3, %g3 - stx %l0, [%g3 + TI_REG_WINDOW + 0x00] - stx %l1, [%g3 + TI_REG_WINDOW + 0x08] - stx %l2, [%g3 + TI_REG_WINDOW + 0x10] - stx %l3, [%g3 + TI_REG_WINDOW + 0x18] - stx %l4, [%g3 + TI_REG_WINDOW + 0x20] - - stx %l5, [%g3 + TI_REG_WINDOW + 0x28] - stx %l6, [%g3 + TI_REG_WINDOW + 0x30] - stx %l7, [%g3 + TI_REG_WINDOW + 0x38] - stx %i0, [%g3 + TI_REG_WINDOW + 0x40] - stx %i1, [%g3 + TI_REG_WINDOW + 0x48] - stx %i2, [%g3 + TI_REG_WINDOW + 0x50] - stx %i3, [%g3 + TI_REG_WINDOW + 0x58] - stx %i4, [%g3 + TI_REG_WINDOW + 0x60] - - stx %i5, [%g3 + TI_REG_WINDOW + 0x68] - stx %i6, [%g3 + TI_REG_WINDOW + 0x70] - stx %i7, [%g3 + TI_REG_WINDOW + 0x78] - b,pt %xcc, 2f - add %g1, 1, %g1 -1: std %l0, [%g3 + TI_REG_WINDOW + 0x00] - std %l2, [%g3 + TI_REG_WINDOW + 0x08] - std %l4, [%g3 + TI_REG_WINDOW + 0x10] + rdpr %tstate, %g1 + and %g1, TSTATE_CWP, %g1 + wrpr %g1, %cwp + ba,pt %xcc, etrap + rd %pc, %g7 + mov %l4, %o2 + mov %l5, %o1 + call mem_address_unaligned + add %sp, PTREGS_OFF, %o0 + ba,a,pt %xcc, rtrap_clr_l6 - std %l6, [%g3 + TI_REG_WINDOW + 0x18] - std %i0, [%g3 + TI_REG_WINDOW + 0x20] - std %i2, [%g3 + TI_REG_WINDOW + 0x28] - std %i4, [%g3 + TI_REG_WINDOW + 0x30] - std %i6, [%g3 + TI_REG_WINDOW + 0x38] - add %g1, 1, %g1 -2: stb %g1, [%g6 + TI_WSAVED] - rdpr %tstate, %g1 - - andcc %g1, TSTATE_PRIV, %g0 - saved - be,pn %xcc, window_mna_from_user_common - and %g1, TSTATE_CWP, %g1 - retry -window_mna_from_user_common: - wrpr %g1, %cwp - sethi %hi(109f), %g7 - ba,pt %xcc, etrap -109: or %g7, %lo(109b), %g7 - mov %l4, %o2 - mov %l5, %o1 - call mem_address_unaligned - add %sp, PTREGS_OFF, %o0 - ba,pt %xcc, rtrap - clr %l6 - - .globl winfix_dax, fill_fixup_dax, spill_fixup_dax winfix_dax: - andn %g3, 0x7f, %g3 - add %g3, 0x74, %g3 - wrpr %g3, %tnpc + andn %g3, 0x7f, %g3 + add %g3, 0x74, %g3 + wrpr %g3, %tnpc done -fill_fixup_dax: - TRAP_LOAD_THREAD_REG(%g6, %g1) - rdpr %tstate, %g1 - andcc %g1, TSTATE_PRIV, %g0 - be,pt %xcc, window_dax_from_user_common - and %g1, TSTATE_CWP, %g1 - - /* Please, see fill_fixup commentary about why we must preserve - * %l5 and %l6 to preserve absolute correct semantics. - */ - rdpr %wstate, %g2 ! Grab user mode wstate. - wrpr %g1, %cwp ! Get into the right window. - sll %g2, 3, %g2 ! NORMAL-->OTHER - wrpr %g0, 0x0, %canrestore ! Standard etrap stuff. - - wrpr %g2, 0x0, %wstate ! This must be consistent. - wrpr %g0, 0x0, %otherwin ! We know this. - call set_pcontext ! Change contexts... - nop - rdpr %pstate, %l1 ! Prepare to change globals. - mov %g4, %o1 ! Setup args for - mov %g5, %o2 ! final call to spitfire_data_access_exception. - andn %l1, PSTATE_MM, %l1 ! We want to be in RMO - - mov %g6, %o7 ! Stash away current. - wrpr %g0, 0x0, %tl ! Out of trap levels. - wrpr %l1, (PSTATE_IE | PSTATE_AG | PSTATE_RMO), %pstate - mov %o7, %g6 ! Get current back. - ldx [%g6 + TI_TASK], %g4 ! Finish it. - LOAD_PER_CPU_BASE(%g5, %g6, %g1, %g2, %g3) - call spitfire_data_access_exception - add %sp, PTREGS_OFF, %o0 - b,pt %xcc, rtrap - nop ! yes, the nop is correct -spill_fixup_dax: +fill_fixup_dax: TRAP_LOAD_THREAD_REG(%g6, %g1) - ldx [%g6 + TI_FLAGS], %g1 - andcc %g1, _TIF_32BIT, %g0 - ldub [%g6 + TI_WSAVED], %g1 - sll %g1, 3, %g3 - add %g6, %g3, %g3 - stx %sp, [%g3 + TI_RWIN_SPTRS] - - sll %g1, 7, %g3 - bne,pt %xcc, 1f - add %g6, %g3, %g3 - stx %l0, [%g3 + TI_REG_WINDOW + 0x00] - stx %l1, [%g3 + TI_REG_WINDOW + 0x08] - stx %l2, [%g3 + TI_REG_WINDOW + 0x10] - stx %l3, [%g3 + TI_REG_WINDOW + 0x18] - stx %l4, [%g3 + TI_REG_WINDOW + 0x20] - - stx %l5, [%g3 + TI_REG_WINDOW + 0x28] - stx %l6, [%g3 + TI_REG_WINDOW + 0x30] - stx %l7, [%g3 + TI_REG_WINDOW + 0x38] - stx %i0, [%g3 + TI_REG_WINDOW + 0x40] - stx %i1, [%g3 + TI_REG_WINDOW + 0x48] - stx %i2, [%g3 + TI_REG_WINDOW + 0x50] - stx %i3, [%g3 + TI_REG_WINDOW + 0x58] - stx %i4, [%g3 + TI_REG_WINDOW + 0x60] - - stx %i5, [%g3 + TI_REG_WINDOW + 0x68] - stx %i6, [%g3 + TI_REG_WINDOW + 0x70] - stx %i7, [%g3 + TI_REG_WINDOW + 0x78] - b,pt %xcc, 2f - add %g1, 1, %g1 -1: std %l0, [%g3 + TI_REG_WINDOW + 0x00] - std %l2, [%g3 + TI_REG_WINDOW + 0x08] - std %l4, [%g3 + TI_REG_WINDOW + 0x10] - - std %l6, [%g3 + TI_REG_WINDOW + 0x18] - std %i0, [%g3 + TI_REG_WINDOW + 0x20] - std %i2, [%g3 + TI_REG_WINDOW + 0x28] - std %i4, [%g3 + TI_REG_WINDOW + 0x30] - std %i6, [%g3 + TI_REG_WINDOW + 0x38] - add %g1, 1, %g1 -2: stb %g1, [%g6 + TI_WSAVED] - rdpr %tstate, %g1 - - andcc %g1, TSTATE_PRIV, %g0 - saved - be,pn %xcc, window_dax_from_user_common - and %g1, TSTATE_CWP, %g1 - retry -window_dax_from_user_common: - wrpr %g1, %cwp - sethi %hi(109f), %g7 - ba,pt %xcc, etrap -109: or %g7, %lo(109b), %g7 - mov %l4, %o1 - mov %l5, %o2 - call spitfire_data_access_exception - add %sp, PTREGS_OFF, %o0 - ba,pt %xcc, rtrap - clr %l6 + rdpr %tstate, %g1 + and %g1, TSTATE_CWP, %g1 + wrpr %g1, %cwp + ba,pt %xcc, etrap + rd %pc, %g7 + mov %l4, %o1 + mov %l5, %o2 + call spitfire_data_access_exception + add %sp, PTREGS_OFF, %o0 + ba,a,pt %xcc, rtrap_clr_l6 -- cgit v1.2.3-18-g5258 From 52bf082f0a6e49e08ed99d4d9518c662dc735c7a Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 4 Feb 2006 03:08:37 -0800 Subject: [SPARC64]: SUN4V hypervisor TLB flush support code. Signed-off-by: David S. Miller --- arch/sparc64/mm/ultra.S | 224 +++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 214 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/mm/ultra.S b/arch/sparc64/mm/ultra.S index 269ed57b3e9..cac58d66fca 100644 --- a/arch/sparc64/mm/ultra.S +++ b/arch/sparc64/mm/ultra.S @@ -15,6 +15,7 @@ #include #include #include +#include /* Basically, most of the Spitfire vs. Cheetah madness * has to do with the fact that Cheetah does not support @@ -29,7 +30,8 @@ .text .align 32 .globl __flush_tlb_mm -__flush_tlb_mm: /* %o0=(ctx & TAG_CONTEXT_BITS), %o1=SECONDARY_CONTEXT */ +__flush_tlb_mm: /* 18 insns */ + /* %o0=(ctx & TAG_CONTEXT_BITS), %o1=SECONDARY_CONTEXT */ ldxa [%o1] ASI_DMMU, %g2 cmp %g2, %o0 bne,pn %icc, __spitfire_flush_tlb_mm_slow @@ -52,7 +54,7 @@ __flush_tlb_mm: /* %o0=(ctx & TAG_CONTEXT_BITS), %o1=SECONDARY_CONTEXT */ .align 32 .globl __flush_tlb_pending -__flush_tlb_pending: +__flush_tlb_pending: /* 26 insns */ /* %o0 = context, %o1 = nr, %o2 = vaddrs[] */ rdpr %pstate, %g7 sllx %o1, 3, %o1 @@ -84,7 +86,8 @@ __flush_tlb_pending: .align 32 .globl __flush_tlb_kernel_range -__flush_tlb_kernel_range: /* %o0=start, %o1=end */ +__flush_tlb_kernel_range: /* 14 insns */ + /* %o0=start, %o1=end */ cmp %o0, %o1 be,pn %xcc, 2f sethi %hi(PAGE_SIZE), %o4 @@ -100,6 +103,7 @@ __flush_tlb_kernel_range: /* %o0=start, %o1=end */ flush %o3 retl nop + nop __spitfire_flush_tlb_mm_slow: rdpr %pstate, %g1 @@ -252,7 +256,63 @@ __cheetah_flush_dcache_page: /* 11 insns */ nop #endif /* DCACHE_ALIASING_POSSIBLE */ -cheetah_patch_one: + /* Hypervisor specific versions, patched at boot time. */ +__hypervisor_flush_tlb_mm: /* 8 insns */ + mov %o0, %o2 /* ARG2: mmu context */ + mov 0, %o0 /* ARG0: CPU lists unimplemented */ + mov 0, %o1 /* ARG1: CPU lists unimplemented */ + mov HV_MMU_ALL, %o3 /* ARG3: flags */ + mov HV_FAST_MMU_DEMAP_CTX, %o5 + ta HV_FAST_TRAP + retl + nop + +__hypervisor_flush_tlb_pending: /* 15 insns */ + /* %o0 = context, %o1 = nr, %o2 = vaddrs[] */ + sllx %o1, 3, %g1 + mov %o2, %g2 + mov %o0, %g3 +1: sub %g1, (1 << 3), %g1 + ldx [%g2 + %g1], %o0 /* ARG0: vaddr + IMMU-bit */ + mov %g3, %o1 /* ARG1: mmu context */ + mov HV_MMU_DMMU, %o2 + andcc %o0, 1, %g0 + movne %icc, HV_MMU_ALL, %o2 /* ARG2: flags */ + andn %o0, 1, %o0 + ta HV_MMU_UNMAP_ADDR_TRAP + brnz,pt %g1, 1b + nop + retl + nop + +__hypervisor_flush_tlb_kernel_range: /* 14 insns */ + /* %o0=start, %o1=end */ + cmp %o0, %o1 + be,pn %xcc, 2f + sethi %hi(PAGE_SIZE), %g3 + mov %o0, %g1 + sub %o1, %g1, %g2 + sub %g2, %g3, %g2 +1: add %g1, %g2, %o0 /* ARG0: virtual address */ + mov 0, %o1 /* ARG1: mmu context */ + mov HV_MMU_ALL, %o2 /* ARG2: flags */ + ta HV_MMU_UNMAP_ADDR_TRAP + brnz,pt %g2, 1b + sub %g2, %g3, %g2 +2: retl + nop + +#ifdef DCACHE_ALIASING_POSSIBLE + /* XXX Niagara and friends have an 8K cache, so no aliasing is + * XXX possible, but nothing explicit in the Hypervisor API + * XXX guarantees this. + */ +__hypervisor_flush_dcache_page: /* 2 insns */ + retl + nop +#endif + +tlb_patch_one: 1: lduw [%o1], %g1 stw %g1, [%o0] flush %o0 @@ -271,14 +331,14 @@ cheetah_patch_cachetlbops: or %o0, %lo(__flush_tlb_mm), %o0 sethi %hi(__cheetah_flush_tlb_mm), %o1 or %o1, %lo(__cheetah_flush_tlb_mm), %o1 - call cheetah_patch_one + call tlb_patch_one mov 19, %o2 sethi %hi(__flush_tlb_pending), %o0 or %o0, %lo(__flush_tlb_pending), %o0 sethi %hi(__cheetah_flush_tlb_pending), %o1 or %o1, %lo(__cheetah_flush_tlb_pending), %o1 - call cheetah_patch_one + call tlb_patch_one mov 27, %o2 #ifdef DCACHE_ALIASING_POSSIBLE @@ -286,7 +346,7 @@ cheetah_patch_cachetlbops: or %o0, %lo(__flush_dcache_page), %o0 sethi %hi(__cheetah_flush_dcache_page), %o1 or %o1, %lo(__cheetah_flush_dcache_page), %o1 - call cheetah_patch_one + call tlb_patch_one mov 11, %o2 #endif /* DCACHE_ALIASING_POSSIBLE */ @@ -309,7 +369,7 @@ cheetah_patch_cachetlbops: */ .align 32 .globl xcall_flush_tlb_mm -xcall_flush_tlb_mm: +xcall_flush_tlb_mm: /* 18 insns */ mov PRIMARY_CONTEXT, %g2 ldxa [%g2] ASI_DMMU, %g3 srlx %g3, CTX_PGSZ1_NUC_SHIFT, %g4 @@ -321,9 +381,16 @@ xcall_flush_tlb_mm: stxa %g0, [%g4] ASI_IMMU_DEMAP stxa %g3, [%g2] ASI_DMMU retry + nop + nop + nop + nop + nop + nop + nop .globl xcall_flush_tlb_pending -xcall_flush_tlb_pending: +xcall_flush_tlb_pending: /* 20 insns */ /* %g5=context, %g1=nr, %g7=vaddrs[] */ sllx %g1, 3, %g1 mov PRIMARY_CONTEXT, %g4 @@ -348,7 +415,7 @@ xcall_flush_tlb_pending: retry .globl xcall_flush_tlb_kernel_range -xcall_flush_tlb_kernel_range: +xcall_flush_tlb_kernel_range: /* 22 insns */ sethi %hi(PAGE_SIZE - 1), %g2 or %g2, %lo(PAGE_SIZE - 1), %g2 andn %g1, %g2, %g1 @@ -365,6 +432,12 @@ xcall_flush_tlb_kernel_range: retry nop nop + nop + nop + nop + nop + nop + nop /* This runs in a very controlled environment, so we do * not need to worry about BH races etc. @@ -458,6 +531,76 @@ xcall_flush_dcache_page_spitfire: /* %g1 == physical page address nop nop + .globl __hypervisor_xcall_flush_tlb_mm +__hypervisor_xcall_flush_tlb_mm: /* 18 insns */ + /* %g5=ctx, g1,g2,g3,g4,g7=scratch, %g6=unusable */ + mov %o0, %g2 + mov %o1, %g3 + mov %o2, %g4 + mov %o3, %g1 + mov %o5, %g7 + clr %o0 /* ARG0: CPU lists unimplemented */ + clr %o1 /* ARG1: CPU lists unimplemented */ + mov %g5, %o2 /* ARG2: mmu context */ + mov HV_MMU_ALL, %o3 /* ARG3: flags */ + mov HV_FAST_MMU_DEMAP_CTX, %o5 + ta HV_FAST_TRAP + mov %g2, %o0 + mov %g3, %o1 + mov %g4, %o2 + mov %g1, %o3 + mov %g7, %o5 + membar #Sync + retry + + .globl __hypervisor_xcall_flush_tlb_pending +__hypervisor_xcall_flush_tlb_pending: /* 18 insns */ + /* %g5=ctx, %g1=nr, %g7=vaddrs[], %g2,%g3,%g4=scratch, %g6=unusable */ + sllx %g1, 3, %g1 + mov %o0, %g2 + mov %o1, %g3 + mov %o2, %g4 +1: sub %g1, (1 << 3), %g1 + ldx [%g7 + %g1], %o0 /* ARG0: virtual address */ + mov %g5, %o1 /* ARG1: mmu context */ + mov HV_MMU_DMMU, %o2 + andcc %o0, 1, %g0 + movne %icc, HV_MMU_ALL, %o2 /* ARG2: flags */ + ta HV_MMU_UNMAP_ADDR_TRAP + brnz,pt %g1, 1b + nop + mov %g2, %o0 + mov %g3, %o1 + mov %g4, %o2 + membar #Sync + retry + + .globl __hypervisor_xcall_flush_tlb_kernel_range +__hypervisor_xcall_flush_tlb_kernel_range: /* 22 insns */ + /* %g1=start, %g7=end, g2,g3,g4,g5=scratch, g6=unusable */ + sethi %hi(PAGE_SIZE - 1), %g2 + or %g2, %lo(PAGE_SIZE - 1), %g2 + andn %g1, %g2, %g1 + andn %g7, %g2, %g7 + sub %g7, %g1, %g3 + add %g2, 1, %g2 + sub %g3, %g2, %g3 + mov %o0, %g2 + mov %o1, %g4 + mov %o2, %g5 +1: add %g1, %g3, %o0 /* ARG0: virtual address */ + mov 0, %o1 /* ARG1: mmu context */ + mov HV_MMU_ALL, %o2 /* ARG2: flags */ + ta HV_MMU_UNMAP_ADDR_TRAP + sethi %hi(PAGE_SIZE), %o2 + brnz,pt %g3, 1b + sub %g3, %o2, %g3 + mov %g2, %o0 + mov %g4, %o1 + mov %g5, %o2 + membar #Sync + retry + /* These just get rescheduled to PIL vectors. */ .globl xcall_call_function xcall_call_function: @@ -475,3 +618,64 @@ xcall_capture: retry #endif /* CONFIG_SMP */ + + + .globl hypervisor_patch_cachetlbops +hypervisor_patch_cachetlbops: + save %sp, -128, %sp + + sethi %hi(__flush_tlb_mm), %o0 + or %o0, %lo(__flush_tlb_mm), %o0 + sethi %hi(__hypervisor_flush_tlb_mm), %o1 + or %o1, %lo(__hypervisor_flush_tlb_mm), %o1 + call tlb_patch_one + mov 8, %o2 + + sethi %hi(__flush_tlb_pending), %o0 + or %o0, %lo(__flush_tlb_pending), %o0 + sethi %hi(__hypervisor_flush_tlb_pending), %o1 + or %o1, %lo(__hypervisor_flush_tlb_pending), %o1 + call tlb_patch_one + mov 15, %o2 + + sethi %hi(__flush_tlb_kernel_range), %o0 + or %o0, %lo(__flush_tlb_kernel_range), %o0 + sethi %hi(__hypervisor_flush_tlb_kernel_range), %o1 + or %o1, %lo(__hypervisor_flush_tlb_kernel_range), %o1 + call tlb_patch_one + mov 14, %o2 + +#ifdef DCACHE_ALIASING_POSSIBLE + sethi %hi(__flush_dcache_page), %o0 + or %o0, %lo(__flush_dcache_page), %o0 + sethi %hi(__hypervisor_flush_dcache_page), %o1 + or %o1, %lo(__hypervisor_flush_dcache_page), %o1 + call tlb_patch_one + mov 2, %o2 +#endif /* DCACHE_ALIASING_POSSIBLE */ + +#ifdef CONFIG_SMP + sethi %hi(xcall_flush_tlb_mm), %o0 + or %o0, %lo(xcall_flush_tlb_mm), %o0 + sethi %hi(__hypervisor_xcall_flush_tlb_mm), %o1 + or %o1, %lo(__hypervisor_xcall_flush_tlb_mm), %o1 + call tlb_patch_one + mov 18, %o2 + + sethi %hi(xcall_flush_tlb_pending), %o0 + or %o0, %lo(xcall_flush_tlb_pending), %o0 + sethi %hi(__hypervisor_xcall_flush_tlb_pending), %o1 + or %o1, %lo(__hypervisor_xcall_flush_tlb_pending), %o1 + call tlb_patch_one + mov 18, %o2 + + sethi %hi(xcall_flush_tlb_kernel_range), %o0 + or %o0, %lo(xcall_flush_tlb_kernel_range), %o0 + sethi %hi(__hypervisor_xcall_flush_tlb_kernel_range), %o1 + or %o1, %lo(__hypervisor_xcall_flush_tlb_kernel_range), %o1 + call tlb_patch_one + mov 22, %o2 +#endif /* CONFIG_SMP */ + + ret + restore -- cgit v1.2.3-18-g5258 From a43fe0e789f5445f5224511034f410adf11f153b Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 4 Feb 2006 03:10:53 -0800 Subject: [SPARC64]: Add some hypervisor tlb_type checks. And more consistently check cheetah{,_plus} instead of assuming anything not spitfire is cheetah{,_plus}. Signed-off-by: David S. Miller --- arch/sparc64/kernel/smp.c | 32 ++++++++++++++++++++++++++------ arch/sparc64/mm/init.c | 6 ++++-- 2 files changed, 30 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 16b8eca9754..aba0f886b05 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -528,6 +528,11 @@ retry: } } +static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mask) +{ + /* XXX implement me */ +} + /* Send cross call to all processors mentioned in MASK * except self. */ @@ -541,8 +546,10 @@ static void smp_cross_call_masked(unsigned long *func, u32 ctx, u64 data1, u64 d if (tlb_type == spitfire) spitfire_xcall_deliver(data0, data1, data2, mask); - else + else if (tlb_type == cheetah || tlb_type == cheetah_plus) cheetah_xcall_deliver(data0, data1, data2, mask); + else + hypervisor_xcall_deliver(data0, data1, data2, mask); /* NOTE: Caller runs local copy on master. */ put_cpu(); @@ -695,11 +702,17 @@ static __inline__ void __local_flush_dcache_page(struct page *page) void smp_flush_dcache_page_impl(struct page *page, int cpu) { cpumask_t mask = cpumask_of_cpu(cpu); - int this_cpu = get_cpu(); + int this_cpu; + + if (tlb_type == hypervisor) + return; #ifdef CONFIG_DEBUG_DCFLUSH atomic_inc(&dcpage_flushes); #endif + + this_cpu = get_cpu(); + if (cpu == this_cpu) { __local_flush_dcache_page(page); } else if (cpu_online(cpu)) { @@ -715,7 +728,7 @@ void smp_flush_dcache_page_impl(struct page *page, int cpu) __pa(pg_addr), (u64) pg_addr, mask); - } else { + } else if (tlb_type == cheetah || tlb_type == cheetah_plus) { #ifdef DCACHE_ALIASING_POSSIBLE data0 = ((u64)&xcall_flush_dcache_page_cheetah); @@ -737,7 +750,12 @@ void flush_dcache_page_all(struct mm_struct *mm, struct page *page) void *pg_addr = page_address(page); cpumask_t mask = cpu_online_map; u64 data0; - int this_cpu = get_cpu(); + int this_cpu; + + if (tlb_type == hypervisor) + return; + + this_cpu = get_cpu(); cpu_clear(this_cpu, mask); @@ -754,7 +772,7 @@ void flush_dcache_page_all(struct mm_struct *mm, struct page *page) __pa(pg_addr), (u64) pg_addr, mask); - } else { + } else if (tlb_type == cheetah || tlb_type == cheetah_plus) { #ifdef DCACHE_ALIASING_POSSIBLE data0 = ((u64)&xcall_flush_dcache_page_cheetah); cheetah_xcall_deliver(data0, @@ -780,8 +798,10 @@ void smp_receive_signal(int cpu) if (tlb_type == spitfire) spitfire_xcall_deliver(data0, 0, 0, mask); - else + else if (tlb_type == cheetah || tlb_type == cheetah_plus) cheetah_xcall_deliver(data0, 0, 0, mask); + else if (tlb_type == hypervisor) + hypervisor_xcall_deliver(data0, 0, 0, mask); } } diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 1af63307b24..ab50cd9618f 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -335,7 +335,7 @@ out: void __kprobes flush_icache_range(unsigned long start, unsigned long end) { - /* Cheetah has coherent I-cache. */ + /* Cheetah and Hypervisor platform cpus have coherent I-cache. */ if (tlb_type == spitfire) { unsigned long kaddr; @@ -372,6 +372,8 @@ void mmu_info(struct seq_file *m) seq_printf(m, "MMU Type\t: Cheetah+\n"); else if (tlb_type == spitfire) seq_printf(m, "MMU Type\t: Spitfire\n"); + else if (tlb_type == hypervisor) + seq_printf(m, "MMU Type\t: Hypervisor (sun4v)\n"); else seq_printf(m, "MMU Type\t: ???\n"); @@ -581,7 +583,7 @@ void __flush_dcache_range(unsigned long start, unsigned long end) if (++n >= 512) break; } - } else { + } else if (tlb_type == cheetah || tlb_type == cheetah_plus) { start = __pa(start); end = __pa(end); for (va = start; va < end; va += 32) -- cgit v1.2.3-18-g5258 From 398d10830843bda7798f71052b54a5341a8ddd53 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 5 Mar 2006 16:41:56 -0800 Subject: [SPARC64]: Niagara optimized memcpy() and copy_{to,from}_user(). Signed-off-by: David S. Miller --- arch/sparc64/lib/Makefile | 1 + arch/sparc64/lib/NGcopy_from_user.S | 37 ++++ arch/sparc64/lib/NGcopy_to_user.S | 40 ++++ arch/sparc64/lib/NGmemcpy.S | 364 ++++++++++++++++++++++++++++++++++++ arch/sparc64/lib/NGpatch.S | 32 ++++ 5 files changed, 474 insertions(+) create mode 100644 arch/sparc64/lib/NGcopy_from_user.S create mode 100644 arch/sparc64/lib/NGcopy_to_user.S create mode 100644 arch/sparc64/lib/NGmemcpy.S create mode 100644 arch/sparc64/lib/NGpatch.S (limited to 'arch') diff --git a/arch/sparc64/lib/Makefile b/arch/sparc64/lib/Makefile index c295806500f..813f622b5c4 100644 --- a/arch/sparc64/lib/Makefile +++ b/arch/sparc64/lib/Makefile @@ -11,6 +11,7 @@ lib-y := PeeCeeI.o copy_page.o clear_page.o strlen.o strncmp.o \ VISsave.o atomic.o bitops.o \ U1memcpy.o U1copy_from_user.o U1copy_to_user.o \ U3memcpy.o U3copy_from_user.o U3copy_to_user.o U3patch.o \ + NGmemcpy.o NGcopy_from_user.o NGcopy_to_user.o NGpatch.o \ copy_in_user.o user_fixup.o memmove.o \ mcount.o ipcsum.o rwsem.o xor.o find_bit.o delay.o diff --git a/arch/sparc64/lib/NGcopy_from_user.S b/arch/sparc64/lib/NGcopy_from_user.S new file mode 100644 index 00000000000..2d93456f76d --- /dev/null +++ b/arch/sparc64/lib/NGcopy_from_user.S @@ -0,0 +1,37 @@ +/* NGcopy_from_user.S: Niagara optimized copy from userspace. + * + * Copyright (C) 2006 David S. Miller (davem@davemloft.net) + */ + +#define EX_LD(x) \ +98: x; \ + .section .fixup; \ + .align 4; \ +99: wr %g0, ASI_AIUS, %asi;\ + retl; \ + mov 1, %o0; \ + .section __ex_table,"a";\ + .align 4; \ + .word 98b, 99b; \ + .text; \ + .align 4; + +#ifndef ASI_AIUS +#define ASI_AIUS 0x11 +#endif + +#define FUNC_NAME NGcopy_from_user +#define LOAD(type,addr,dest) type##a [addr] ASI_AIUS, dest +#define LOAD_TWIN(addr_reg,dest0,dest1) \ + ldda [addr_reg] ASI_BLK_INIT_QUAD_LDD_AIUS, dest0 +#define EX_RETVAL(x) 0 + +#ifdef __KERNEL__ +#define PREAMBLE \ + rd %asi, %g1; \ + cmp %g1, ASI_AIUS; \ + bne,pn %icc, memcpy_user_stub; \ + nop +#endif + +#include "NGmemcpy.S" diff --git a/arch/sparc64/lib/NGcopy_to_user.S b/arch/sparc64/lib/NGcopy_to_user.S new file mode 100644 index 00000000000..4a12395b450 --- /dev/null +++ b/arch/sparc64/lib/NGcopy_to_user.S @@ -0,0 +1,40 @@ +/* NGcopy_to_user.S: Niagara optimized copy to userspace. + * + * Copyright (C) 2006 David S. Miller (davem@davemloft.net) + */ + +#define EX_ST(x) \ +98: x; \ + .section .fixup; \ + .align 4; \ +99: wr %g0, ASI_AIUS, %asi;\ + retl; \ + mov 1, %o0; \ + .section __ex_table,"a";\ + .align 4; \ + .word 98b, 99b; \ + .text; \ + .align 4; + +#ifndef ASI_AIUS +#define ASI_AIUS 0x11 +#endif + +#define FUNC_NAME NGcopy_to_user +#define STORE(type,src,addr) type##a src, [addr] ASI_AIUS +#define STORE_ASI ASI_BLK_INIT_QUAD_LDD_AIUS +#define EX_RETVAL(x) 0 + +#ifdef __KERNEL__ + /* Writing to %asi is _expensive_ so we hardcode it. + * Reading %asi to check for KERNEL_DS is comparatively + * cheap. + */ +#define PREAMBLE \ + rd %asi, %g1; \ + cmp %g1, ASI_AIUS; \ + bne,pn %icc, memcpy_user_stub; \ + nop +#endif + +#include "U3memcpy.S" diff --git a/arch/sparc64/lib/NGmemcpy.S b/arch/sparc64/lib/NGmemcpy.S new file mode 100644 index 00000000000..a39aa3bd434 --- /dev/null +++ b/arch/sparc64/lib/NGmemcpy.S @@ -0,0 +1,364 @@ +/* NGmemcpy.S: Niagara optimized memcpy. + * + * Copyright (C) 2006 David S. Miller (davem@davemloft.net) + */ + +#ifdef __KERNEL__ +#include +#define GLOBAL_SPARE %g7 +#define RESTORE_ASI wr %g0, ASI_AIUS, %asi +#else +#define GLOBAL_SPARE %g5 +#define RESTORE_ASI +#endif + +#ifndef STORE_ASI +#define STORE_ASI ASI_BLK_INIT_QUAD_LDD_P +#endif + +#ifndef EX_LD +#define EX_LD(x) x +#endif + +#ifndef EX_ST +#define EX_ST(x) x +#endif + +#ifndef EX_RETVAL +#define EX_RETVAL(x) x +#endif + +#ifndef LOAD +#ifndef MEMCPY_DEBUG +#define LOAD(type,addr,dest) type [addr], dest +#else +#define LOAD(type,addr,dest) type##a [addr] 0x80, dest +#endif +#endif + +#ifndef LOAD_TWIN +#define LOAD_TWIN(addr_reg,dest0,dest1) \ + ldda [addr_reg] ASI_BLK_INIT_QUAD_LDD_P, dest0 +#endif + +#ifndef STORE +#define STORE(type,src,addr) type src, [addr] +#endif + +#ifndef STORE_INIT +#define STORE_INIT(src,addr) stxa src, [addr] %asi +#endif + +#ifndef FUNC_NAME +#define FUNC_NAME NGmemcpy +#endif + +#ifndef PREAMBLE +#define PREAMBLE +#endif + +#ifndef XCC +#define XCC xcc +#endif + + .register %g2,#scratch + .register %g3,#scratch + + .text + .align 64 + + .globl FUNC_NAME + .type FUNC_NAME,#function +FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ + srlx %o2, 31, %g2 + cmp %g2, 0 + tne %xcc, 5 + PREAMBLE + mov %o0, GLOBAL_SPARE + cmp %o2, 0 + be,pn %XCC, 85f + or %o0, %o1, %o3 + cmp %o2, 16 + blu,a,pn %XCC, 80f + or %o3, %o2, %o3 + + /* 2 blocks (128 bytes) is the minimum we can do the block + * copy with. We need to ensure that we'll iterate at least + * once in the block copy loop. At worst we'll need to align + * the destination to a 64-byte boundary which can chew up + * to (64 - 1) bytes from the length before we perform the + * block copy loop. + */ + cmp %o2, (2 * 64) + blu,pt %XCC, 70f + andcc %o3, 0x7, %g0 + + /* %o0: dst + * %o1: src + * %o2: len (known to be >= 128) + * + * The block copy loops will use %o4/%o5,%g2/%g3 as + * temporaries while copying the data. + */ + + LOAD(prefetch, %o1, #one_read) + wr %g0, STORE_ASI, %asi + + /* Align destination on 64-byte boundary. */ + andcc %o0, (64 - 1), %o4 + be,pt %XCC, 2f + sub %o4, 64, %o4 + sub %g0, %o4, %o4 ! bytes to align dst + sub %o2, %o4, %o2 +1: subcc %o4, 1, %o4 + EX_LD(LOAD(ldub, %o1, %g1)) + EX_ST(STORE(stb, %g1, %o0)) + add %o1, 1, %o1 + bne,pt %XCC, 1b + add %o0, 1, %o0 + + /* If the source is on a 16-byte boundary we can do + * the direct block copy loop. If it is 8-byte aligned + * we can do the 16-byte loads offset by -8 bytes and the + * init stores offset by one register. + * + * If the source is not even 8-byte aligned, we need to do + * shifting and masking (basically integer faligndata). + * + * The careful bit with init stores is that if we store + * to any part of the cache line we have to store the whole + * cacheline else we can end up with corrupt L2 cache line + * contents. Since the loop works on 64-bytes of 64-byte + * aligned store data at a time, this is easy to ensure. + */ +2: + andcc %o1, (16 - 1), %o4 + andn %o2, (64 - 1), %g1 ! block copy loop iterator + sub %o2, %g1, %o2 ! final sub-block copy bytes + be,pt %XCC, 50f + cmp %o4, 8 + be,a,pt %XCC, 10f + sub %o1, 0x8, %o1 + + /* Neither 8-byte nor 16-byte aligned, shift and mask. */ + mov %g1, %o4 + and %o1, 0x7, %g1 + sll %g1, 3, %g1 + mov 64, %o3 + andn %o1, 0x7, %o1 + EX_LD(LOAD(ldx, %o1, %g2)) + sub %o3, %g1, %o3 + sllx %g2, %g1, %g2 + +#define SWIVEL_ONE_DWORD(SRC, TMP1, TMP2, PRE_VAL, PRE_SHIFT, POST_SHIFT, DST)\ + EX_LD(LOAD(ldx, SRC, TMP1)); \ + srlx TMP1, PRE_SHIFT, TMP2; \ + or TMP2, PRE_VAL, TMP2; \ + EX_ST(STORE_INIT(TMP2, DST)); \ + sllx TMP1, POST_SHIFT, PRE_VAL; + +1: add %o1, 0x8, %o1 + SWIVEL_ONE_DWORD(%o1, %g3, %o5, %g2, %o3, %g1, %o0 + 0x00) + add %o1, 0x8, %o1 + SWIVEL_ONE_DWORD(%o1, %g3, %o5, %g2, %o3, %g1, %o0 + 0x08) + add %o1, 0x8, %o1 + SWIVEL_ONE_DWORD(%o1, %g3, %o5, %g2, %o3, %g1, %o0 + 0x10) + add %o1, 0x8, %o1 + SWIVEL_ONE_DWORD(%o1, %g3, %o5, %g2, %o3, %g1, %o0 + 0x18) + add %o1, 32, %o1 + LOAD(prefetch, %o1, #one_read) + sub %o1, 32 - 8, %o1 + SWIVEL_ONE_DWORD(%o1, %g3, %o5, %g2, %o3, %g1, %o0 + 0x20) + add %o1, 8, %o1 + SWIVEL_ONE_DWORD(%o1, %g3, %o5, %g2, %o3, %g1, %o0 + 0x28) + add %o1, 8, %o1 + SWIVEL_ONE_DWORD(%o1, %g3, %o5, %g2, %o3, %g1, %o0 + 0x30) + add %o1, 8, %o1 + SWIVEL_ONE_DWORD(%o1, %g3, %o5, %g2, %o3, %g1, %o0 + 0x38) + subcc %o4, 64, %o4 + bne,pt %XCC, 1b + add %o0, 64, %o0 + +#undef SWIVEL_ONE_DWORD + + srl %g1, 3, %g1 + ba,pt %XCC, 60f + add %o1, %g1, %o1 + +10: /* Destination is 64-byte aligned, source was only 8-byte + * aligned but it has been subtracted by 8 and we perform + * one twin load ahead, then add 8 back into source when + * we finish the loop. + */ + EX_LD(LOAD_TWIN(%o1, %o4, %o5)) +1: add %o1, 16, %o1 + EX_LD(LOAD_TWIN(%o1, %g2, %g3)) + add %o1, 16 + 32, %o1 + LOAD(prefetch, %o1, #one_read) + sub %o1, 32, %o1 + EX_ST(STORE_INIT(%o5, %o0 + 0x00)) ! initializes cache line + EX_ST(STORE_INIT(%g2, %o0 + 0x08)) + EX_LD(LOAD_TWIN(%o1, %o4, %o5)) + add %o1, 16, %o1 + EX_ST(STORE_INIT(%g3, %o0 + 0x10)) + EX_ST(STORE_INIT(%o4, %o0 + 0x18)) + EX_LD(LOAD_TWIN(%o1, %g2, %g3)) + add %o1, 16, %o1 + EX_ST(STORE_INIT(%o5, %o0 + 0x20)) + EX_ST(STORE_INIT(%g2, %o0 + 0x28)) + EX_LD(LOAD_TWIN(%o1, %o4, %o5)) + EX_ST(STORE_INIT(%g3, %o0 + 0x30)) + EX_ST(STORE_INIT(%o4, %o0 + 0x38)) + subcc %g1, 64, %g1 + bne,pt %XCC, 1b + add %o0, 64, %o0 + + ba,pt %XCC, 60f + add %o1, 0x8, %o1 + +50: /* Destination is 64-byte aligned, and source is 16-byte + * aligned. + */ +1: EX_LD(LOAD_TWIN(%o1, %o4, %o5)) + add %o1, 16, %o1 + EX_LD(LOAD_TWIN(%o1, %g2, %g3)) + add %o1, 16 + 32, %o1 + LOAD(prefetch, %o1, #one_read) + sub %o1, 32, %o1 + EX_ST(STORE_INIT(%o4, %o0 + 0x00)) ! initializes cache line + EX_ST(STORE_INIT(%o5, %o0 + 0x08)) + EX_LD(LOAD_TWIN(%o1, %o4, %o5)) + add %o1, 16, %o1 + EX_ST(STORE_INIT(%g2, %o0 + 0x10)) + EX_ST(STORE_INIT(%g3, %o0 + 0x18)) + EX_LD(LOAD_TWIN(%o1, %g2, %g3)) + add %o1, 16, %o1 + EX_ST(STORE_INIT(%o4, %o0 + 0x20)) + EX_ST(STORE_INIT(%o5, %o0 + 0x28)) + EX_ST(STORE_INIT(%g2, %o0 + 0x30)) + EX_ST(STORE_INIT(%g3, %o0 + 0x38)) + subcc %g1, 64, %g1 + bne,pt %XCC, 1b + add %o0, 64, %o0 + /* fall through */ + +60: + /* %o2 contains any final bytes still needed to be copied + * over. If anything is left, we copy it one byte at a time. + */ + RESTORE_ASI + brz,pt %o2, 85f + sub %o0, %o1, %o3 + ba,a,pt %XCC, 90f + + .align 64 +70: /* 16 < len <= 64 */ + bne,pn %XCC, 75f + sub %o0, %o1, %o3 + +72: + andn %o2, 0xf, %o4 + and %o2, 0xf, %o2 +1: subcc %o4, 0x10, %o4 + EX_LD(LOAD(ldx, %o1, %o5)) + add %o1, 0x08, %o1 + EX_LD(LOAD(ldx, %o1, %g1)) + sub %o1, 0x08, %o1 + EX_ST(STORE(stx, %o5, %o1 + %o3)) + add %o1, 0x8, %o1 + EX_ST(STORE(stx, %g1, %o1 + %o3)) + bgu,pt %XCC, 1b + add %o1, 0x8, %o1 +73: andcc %o2, 0x8, %g0 + be,pt %XCC, 1f + nop + sub %o2, 0x8, %o2 + EX_LD(LOAD(ldx, %o1, %o5)) + EX_ST(STORE(stx, %o5, %o1 + %o3)) + add %o1, 0x8, %o1 +1: andcc %o2, 0x4, %g0 + be,pt %XCC, 1f + nop + sub %o2, 0x4, %o2 + EX_LD(LOAD(lduw, %o1, %o5)) + EX_ST(STORE(stw, %o5, %o1 + %o3)) + add %o1, 0x4, %o1 +1: cmp %o2, 0 + be,pt %XCC, 85f + nop + ba,pt %xcc, 90f + nop + +75: + andcc %o0, 0x7, %g1 + sub %g1, 0x8, %g1 + be,pn %icc, 2f + sub %g0, %g1, %g1 + sub %o2, %g1, %o2 + +1: subcc %g1, 1, %g1 + EX_LD(LOAD(ldub, %o1, %o5)) + EX_ST(STORE(stb, %o5, %o1 + %o3)) + bgu,pt %icc, 1b + add %o1, 1, %o1 + +2: add %o1, %o3, %o0 + andcc %o1, 0x7, %g1 + bne,pt %icc, 8f + sll %g1, 3, %g1 + + cmp %o2, 16 + bgeu,pt %icc, 72b + nop + ba,a,pt %xcc, 73b + +8: mov 64, %o3 + andn %o1, 0x7, %o1 + EX_LD(LOAD(ldx, %o1, %g2)) + sub %o3, %g1, %o3 + andn %o2, 0x7, %o4 + sllx %g2, %g1, %g2 +1: add %o1, 0x8, %o1 + EX_LD(LOAD(ldx, %o1, %g3)) + subcc %o4, 0x8, %o4 + srlx %g3, %o3, %o5 + or %o5, %g2, %o5 + EX_ST(STORE(stx, %o5, %o0)) + add %o0, 0x8, %o0 + bgu,pt %icc, 1b + sllx %g3, %g1, %g2 + + srl %g1, 3, %g1 + andcc %o2, 0x7, %o2 + be,pn %icc, 85f + add %o1, %g1, %o1 + ba,pt %xcc, 90f + sub %o0, %o1, %o3 + + .align 64 +80: /* 0 < len <= 16 */ + andcc %o3, 0x3, %g0 + bne,pn %XCC, 90f + sub %o0, %o1, %o3 + +1: + subcc %o2, 4, %o2 + EX_LD(LOAD(lduw, %o1, %g1)) + EX_ST(STORE(stw, %g1, %o1 + %o3)) + bgu,pt %XCC, 1b + add %o1, 4, %o1 + +85: retl + mov EX_RETVAL(GLOBAL_SPARE), %o0 + + .align 32 +90: + subcc %o2, 1, %o2 + EX_LD(LOAD(ldub, %o1, %g1)) + EX_ST(STORE(stb, %g1, %o1 + %o3)) + bgu,pt %XCC, 90b + add %o1, 1, %o1 + retl + mov EX_RETVAL(GLOBAL_SPARE), %o0 + + .size FUNC_NAME, .-FUNC_NAME diff --git a/arch/sparc64/lib/NGpatch.S b/arch/sparc64/lib/NGpatch.S new file mode 100644 index 00000000000..f13ec9e4c8a --- /dev/null +++ b/arch/sparc64/lib/NGpatch.S @@ -0,0 +1,32 @@ +/* NGpatch.S: Patch Ultra-I routines with Niagara variant. + * + * Copyright (C) 2006 David S. Miller + */ + +#define BRANCH_ALWAYS 0x10680000 +#define NOP 0x01000000 +#define NG_DO_PATCH(OLD, NEW) \ + sethi %hi(NEW), %g1; \ + or %g1, %lo(NEW), %g1; \ + sethi %hi(OLD), %g2; \ + or %g2, %lo(OLD), %g2; \ + sub %g1, %g2, %g1; \ + sethi %hi(BRANCH_ALWAYS), %g3; \ + srl %g1, 2, %g1; \ + or %g3, %lo(BRANCH_ALWAYS), %g3; \ + or %g3, %g1, %g3; \ + stw %g3, [%g2]; \ + sethi %hi(NOP), %g3; \ + or %g3, %lo(NOP), %g3; \ + stw %g3, [%g2 + 0x4]; \ + flush %g2; + + .globl niagara_patch_copyops + .type niagara_patch_copyops,#function +niagara_patch_copyops: + NG_DO_PATCH(memcpy, NGmemcpy) + NG_DO_PATCH(___copy_from_user, NGcopy_from_user) + NG_DO_PATCH(___copy_to_user, NGcopy_to_user) + retl + nop + .size niagara_patch_copyops,.-niagara_patch_copyops -- cgit v1.2.3-18-g5258 From d96b81533ba3d5775e45aee6986b2aa33c10801c Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 4 Feb 2006 15:40:53 -0800 Subject: [SPARC64]: Add sun4v case to __GET_CPUID() patch tables. Signed-off-by: David S. Miller --- arch/sparc64/kernel/setup.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index f751d11926b..2918ed3eb1b 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -520,6 +520,9 @@ static void __init per_cpu_patch(void) else insns = &p->cheetah_safari[0]; break; + case hypervisor: + insns = &p->sun4v[0]; + break; default: prom_printf("Unknown cpu type, halting.\n"); prom_halt(); -- cgit v1.2.3-18-g5258 From 6e02493a7f33ac89e698b980a657d77ab2749eaf Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 5 Feb 2006 20:47:26 -0800 Subject: [SPARC64]: Fill dead cycles on trap entry with real work. As we save trap state onto the stack, the store buffer fills up mid-way through and we stall for several cycles as the store buffer trickles out to the L2 cache. Meanwhile we can do some privileged register reads and other calculations, essentially for free. Signed-off-by: David S. Miller --- arch/sparc64/kernel/etrap.S | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/etrap.S b/arch/sparc64/kernel/etrap.S index 4a0e01b1404..f2556146a73 100644 --- a/arch/sparc64/kernel/etrap.S +++ b/arch/sparc64/kernel/etrap.S @@ -98,37 +98,40 @@ etrap_save: save %g2, -STACK_BIAS, %sp stxa %g3, [%l4] ASI_DMMU sethi %hi(KERNBASE), %l4 flush %l4 - wr %g0, ASI_AIUS, %asi -2: wrpr %g0, 0x0, %tl - mov %g4, %l4 + mov ASI_AIUS, %l7 +2: mov %g4, %l4 mov %g5, %l5 - - mov %g7, %l2 + add %g7, 4, %l2 wrpr %g0, ETRAP_PSTATE1, %pstate stx %g1, [%sp + PTREGS_OFF + PT_V9_G1] stx %g2, [%sp + PTREGS_OFF + PT_V9_G2] + sllx %l7, 24, %l7 stx %g3, [%sp + PTREGS_OFF + PT_V9_G3] + rdpr %cwp, %l0 stx %g4, [%sp + PTREGS_OFF + PT_V9_G4] stx %g5, [%sp + PTREGS_OFF + PT_V9_G5] stx %g6, [%sp + PTREGS_OFF + PT_V9_G6] - stx %g7, [%sp + PTREGS_OFF + PT_V9_G7] + or %l7, %l0, %l7 + sethi %hi(TSTATE_RMO | TSTATE_PEF), %l0 + or %l7, %l0, %l7 + wrpr %l2, %tnpc + wrpr %l7, (TSTATE_PRIV | TSTATE_IE), %tstate stx %i0, [%sp + PTREGS_OFF + PT_V9_I0] stx %i1, [%sp + PTREGS_OFF + PT_V9_I1] stx %i2, [%sp + PTREGS_OFF + PT_V9_I2] stx %i3, [%sp + PTREGS_OFF + PT_V9_I3] stx %i4, [%sp + PTREGS_OFF + PT_V9_I4] stx %i5, [%sp + PTREGS_OFF + PT_V9_I5] - stx %i6, [%sp + PTREGS_OFF + PT_V9_I6] - stx %i7, [%sp + PTREGS_OFF + PT_V9_I7] - wrpr %g0, ETRAP_PSTATE2, %pstate mov %l6, %g6 + stx %i7, [%sp + PTREGS_OFF + PT_V9_I7] LOAD_PER_CPU_BASE(%g5, %g6, %g4, %g3, %l1) - jmpl %l2 + 0x4, %g0 - ldx [%g6 + TI_TASK], %g4 + ldx [%g6 + TI_TASK], %g4 + done -3: ldub [%l6 + TI_FPDEPTH], %l5 +3: mov ASI_P, %l7 + ldub [%l6 + TI_FPDEPTH], %l5 add %l6, TI_FPSAVED + 1, %l4 srl %l5, 1, %l3 add %l5, 2, %l5 -- cgit v1.2.3-18-g5258 From 936f482af1743141d637483ec10eb881537c26dc Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 5 Feb 2006 21:29:28 -0800 Subject: [SPARC64]: Add initial code to twiddle %gl on trap entry/exit. Instead of setting/clearing PSTATE_AG we have to change the %gl register value on sun4v. Signed-off-by: David S. Miller --- arch/sparc64/kernel/etrap.S | 17 +++++++++++++++-- arch/sparc64/kernel/rtrap.S | 16 +++++++++++++++- arch/sparc64/kernel/setup.c | 20 ++++++++++++++++++++ arch/sparc64/kernel/vmlinux.lds.S | 3 +++ 4 files changed, 53 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/etrap.S b/arch/sparc64/kernel/etrap.S index f2556146a73..4d644949ad4 100644 --- a/arch/sparc64/kernel/etrap.S +++ b/arch/sparc64/kernel/etrap.S @@ -102,7 +102,14 @@ etrap_save: save %g2, -STACK_BIAS, %sp 2: mov %g4, %l4 mov %g5, %l5 add %g7, 4, %l2 - wrpr %g0, ETRAP_PSTATE1, %pstate + + /* Go to trap time globals so we can save them. */ +661: wrpr %g0, ETRAP_PSTATE1, %pstate + .section .gl_1insn_patch, "ax" + .word 661b + SET_GL(0) + .previous + stx %g1, [%sp + PTREGS_OFF + PT_V9_G1] stx %g2, [%sp + PTREGS_OFF + PT_V9_G2] sllx %l7, 24, %l7 @@ -195,9 +202,15 @@ etraptl1: /* Save tstate/tpc/tnpc of TL 1-->4 and the tl register itself. rdpr %tt, %g3 stx %g3, [%g2 + STACK_BIAS + 0x78] - wrpr %g1, %tl stx %g1, [%g2 + STACK_BIAS + 0x80] + wrpr %g0, 1, %tl +661: nop + .section .gl_1insn_patch, "ax" + .word 661b + SET_GL(1) + .previous + rdpr %tstate, %g1 sub %g2, STACKFRAME_SZ + TRACEREG_SZ - STACK_BIAS, %g2 ba,pt %xcc, 1b diff --git a/arch/sparc64/kernel/rtrap.S b/arch/sparc64/kernel/rtrap.S index ecfbbdc5612..e6130956307 100644 --- a/arch/sparc64/kernel/rtrap.S +++ b/arch/sparc64/kernel/rtrap.S @@ -230,7 +230,14 @@ rt_continue: ldx [%sp + PTREGS_OFF + PT_V9_G1], %g1 1: ldx [%sp + PTREGS_OFF + PT_V9_G6], %g6 ldx [%sp + PTREGS_OFF + PT_V9_G7], %g7 - wrpr %g0, RTRAP_PSTATE_AG_IRQOFF, %pstate + + /* Normal globals are restored, go to trap globals. */ +661: wrpr %g0, RTRAP_PSTATE_AG_IRQOFF, %pstate + .section .gl_1insn_patch, "ax" + .word 661b + SET_GL(1) + .previous + ldx [%sp + PTREGS_OFF + PT_V9_I0], %i0 ldx [%sp + PTREGS_OFF + PT_V9_I1], %i1 @@ -304,6 +311,13 @@ user_rtt_fill_fixup: mov %g6, %l1 wrpr %g0, 0x0, %tl wrpr %g0, RTRAP_PSTATE, %pstate + +661: nop + .section .gl_1insn_patch, "ax" + .word 661b + SET_GL(0) + .previous + mov %l1, %g6 ldx [%g6 + TI_TASK], %g4 LOAD_PER_CPU_BASE(%g5, %g6, %g1, %g2, %g3) diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index 2918ed3eb1b..aaab319ad88 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -545,6 +545,24 @@ static void __init per_cpu_patch(void) #endif } +static void __init gl_patch(void) +{ + struct gl_1insn_patch_entry *p; + + if (tlb_type != hypervisor) + return; + + p = &__gl_1insn_patch; + while (p < &__gl_1insn_patch_end) { + unsigned long addr = p->addr; + + *(unsigned int *) (addr + 0) = p->insn; + __asm__ __volatile__("flush %0" : : "r" (addr + 0)); + + p++; + } +} + void __init setup_arch(char **cmdline_p) { /* Initialize PROM console and command line. */ @@ -567,6 +585,8 @@ void __init setup_arch(char **cmdline_p) */ per_cpu_patch(); + gl_patch(); + boot_flags_init(*cmdline_p); idprom_init(); diff --git a/arch/sparc64/kernel/vmlinux.lds.S b/arch/sparc64/kernel/vmlinux.lds.S index 1639d9c935c..482d1ed87f4 100644 --- a/arch/sparc64/kernel/vmlinux.lds.S +++ b/arch/sparc64/kernel/vmlinux.lds.S @@ -77,6 +77,9 @@ SECTIONS __cpuid_patch = .; .cpuid_patch : { *(.cpuid_patch) } __cpuid_patch_end = .; + __gl_1insn_patch = .; + .gl_1insn_patch : { *(.gl_1insn_patch) } + __gl_1insn_patch_end = .; . = ALIGN(8192); __initramfs_start = .; .init.ramfs : { *(.init.ramfs) } -- cgit v1.2.3-18-g5258 From 314981ac7177a933319e3c071a5cf0a579205e6e Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 5 Feb 2006 21:59:03 -0800 Subject: [SPARC64]: Kill all %pstate changes in context switch code. They are totally unnecessary because: 1) Interrupts are already disabled when switch_to() runs. 2) We don't use hard-coded alternate globals any longer. This found a case in rtrap, which still assumed alternate global %g6 was current_thread_info(), and that is fixed by this changeset as well. Signed-off-by: David S. Miller --- arch/sparc64/kernel/rtrap.S | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/rtrap.S b/arch/sparc64/kernel/rtrap.S index e6130956307..a2fa277da62 100644 --- a/arch/sparc64/kernel/rtrap.S +++ b/arch/sparc64/kernel/rtrap.S @@ -224,7 +224,8 @@ rt_continue: ldx [%sp + PTREGS_OFF + PT_V9_G1], %g1 ldx [%sp + PTREGS_OFF + PT_V9_G4], %g4 ldx [%sp + PTREGS_OFF + PT_V9_G5], %g5 brz,pt %l3, 1f - nop + mov %g6, %l2 + /* Must do this before thread reg is clobbered below. */ LOAD_PER_CPU_BASE(%g5, %g6, %i0, %i1, %i2) 1: @@ -238,6 +239,8 @@ rt_continue: ldx [%sp + PTREGS_OFF + PT_V9_G1], %g1 SET_GL(1) .previous + mov %l2, %g6 + ldx [%sp + PTREGS_OFF + PT_V9_I0], %i0 ldx [%sp + PTREGS_OFF + PT_V9_I1], %i1 -- cgit v1.2.3-18-g5258 From 45fec05f805a113372c9a7ff4c653ac749f6921c Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 5 Feb 2006 22:27:28 -0800 Subject: [SPARC64]: Sanitize %pstate writes for sun4v. If we're just switching between different alternate global sets, nop it out on sun4v. Also, get rid of all of the alternate global save/restore in the OBP CIF trampoline code. Signed-off-by: David S. Miller --- arch/sparc64/kernel/ktlb.S | 18 +++- arch/sparc64/kernel/setup.c | 26 +++-- arch/sparc64/kernel/tsb.S | 12 ++- arch/sparc64/kernel/vmlinux.lds.S | 3 + arch/sparc64/mm/ultra.S | 18 +++- arch/sparc64/prom/cif.S | 211 +++----------------------------------- 6 files changed, 82 insertions(+), 206 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/ktlb.S b/arch/sparc64/kernel/ktlb.S index 9b415ab6db6..c1335432124 100644 --- a/arch/sparc64/kernel/ktlb.S +++ b/arch/sparc64/kernel/ktlb.S @@ -60,8 +60,15 @@ kvmap_itlb_load: retry kvmap_itlb_longpath: - rdpr %pstate, %g5 + +661: rdpr %pstate, %g5 wrpr %g5, PSTATE_AG | PSTATE_MG, %pstate + .section .gl_2insn_patch, "ax" + .word 661b + nop + nop + .previous + rdpr %tpc, %g5 ba,pt %xcc, sparc64_realfault_common mov FAULT_CODE_ITLB, %g4 @@ -161,8 +168,15 @@ kvmap_check_obp: nop kvmap_dtlb_longpath: - rdpr %pstate, %g5 + +661: rdpr %pstate, %g5 wrpr %g5, PSTATE_AG | PSTATE_MG, %pstate + .section .gl_2insn_patch, "ax" + .word 661b + nop + nop + .previous + rdpr %tl, %g4 cmp %g4, 1 mov TLB_TAG_ACCESS, %g4 diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index aaab319ad88..e22bf5fc92c 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -547,19 +547,33 @@ static void __init per_cpu_patch(void) static void __init gl_patch(void) { - struct gl_1insn_patch_entry *p; + struct gl_1insn_patch_entry *p1; + struct gl_2insn_patch_entry *p2; if (tlb_type != hypervisor) return; - p = &__gl_1insn_patch; - while (p < &__gl_1insn_patch_end) { - unsigned long addr = p->addr; + p1 = &__gl_1insn_patch; + while (p1 < &__gl_1insn_patch_end) { + unsigned long addr = p1->addr; - *(unsigned int *) (addr + 0) = p->insn; + *(unsigned int *) (addr + 0) = p1->insn; __asm__ __volatile__("flush %0" : : "r" (addr + 0)); - p++; + p1++; + } + + p2 = &__gl_2insn_patch; + while (p2 < &__gl_2insn_patch_end) { + unsigned long addr = p2->addr; + + *(unsigned int *) (addr + 0) = p2->insns[0]; + __asm__ __volatile__("flush %0" : : "r" (addr + 0)); + + *(unsigned int *) (addr + 3) = p2->insns[1]; + __asm__ __volatile__("flush %0" : : "r" (addr + 4)); + + p2++; } } diff --git a/arch/sparc64/kernel/tsb.S b/arch/sparc64/kernel/tsb.S index 3b45db98005..96e63168d8b 100644 --- a/arch/sparc64/kernel/tsb.S +++ b/arch/sparc64/kernel/tsb.S @@ -82,9 +82,17 @@ tsb_itlb_load: .globl tsb_do_fault tsb_do_fault: cmp %g3, FAULT_CODE_DTLB - rdpr %pstate, %g5 + +661: rdpr %pstate, %g5 + wrpr %g5, PSTATE_AG | PSTATE_MG, %pstate + .section .gl_2insn_patch, "ax" + .word 661b + nop + nop + .previous + bne,pn %xcc, tsb_do_itlb_fault - wrpr %g5, PSTATE_AG | PSTATE_MG, %pstate + nop tsb_do_dtlb_fault: rdpr %tl, %g4 diff --git a/arch/sparc64/kernel/vmlinux.lds.S b/arch/sparc64/kernel/vmlinux.lds.S index 482d1ed87f4..686bf6b3b03 100644 --- a/arch/sparc64/kernel/vmlinux.lds.S +++ b/arch/sparc64/kernel/vmlinux.lds.S @@ -80,6 +80,9 @@ SECTIONS __gl_1insn_patch = .; .gl_1insn_patch : { *(.gl_1insn_patch) } __gl_1insn_patch_end = .; + __gl_2insn_patch = .; + .gl_2insn_patch : { *(.gl_2insn_patch) } + __gl_2insn_patch_end = .; . = ALIGN(8192); __initramfs_start = .; .init.ramfs : { *(.init.ramfs) } diff --git a/arch/sparc64/mm/ultra.S b/arch/sparc64/mm/ultra.S index cac58d66fca..5dd86ad0d29 100644 --- a/arch/sparc64/mm/ultra.S +++ b/arch/sparc64/mm/ultra.S @@ -444,8 +444,15 @@ xcall_flush_tlb_kernel_range: /* 22 insns */ */ .globl xcall_sync_tick xcall_sync_tick: - rdpr %pstate, %g2 + +661: rdpr %pstate, %g2 wrpr %g2, PSTATE_IG | PSTATE_AG, %pstate + .section .gl_2insn_patch, "ax" + .word 661b + nop + nop + .previous + rdpr %pil, %g2 wrpr %g0, 15, %pil sethi %hi(109f), %g7 @@ -468,8 +475,15 @@ xcall_sync_tick: */ .globl xcall_report_regs xcall_report_regs: - rdpr %pstate, %g2 + +661: rdpr %pstate, %g2 wrpr %g2, PSTATE_IG | PSTATE_AG, %pstate + .section .gl_2insn_patch, "ax" + .word 661b + nop + nop + .previous + rdpr %pil, %g2 wrpr %g0, 15, %pil sethi %hi(109f), %g7 diff --git a/arch/sparc64/prom/cif.S b/arch/sparc64/prom/cif.S index 29d0ae74aed..5f27ad779c0 100644 --- a/arch/sparc64/prom/cif.S +++ b/arch/sparc64/prom/cif.S @@ -1,10 +1,12 @@ /* cif.S: PROM entry/exit assembler trampolines. * - * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz) - * Copyright (C) 2005 David S. Miller + * Copyright (C) 1996, 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz) + * Copyright (C) 2005, 2006 David S. Miller */ #include +#include +#include .text .globl prom_cif_interface @@ -12,78 +14,16 @@ prom_cif_interface: sethi %hi(p1275buf), %o0 or %o0, %lo(p1275buf), %o0 ldx [%o0 + 0x010], %o1 ! prom_cif_stack - save %o1, -0x190, %sp + save %o1, -192, %sp ldx [%i0 + 0x008], %l2 ! prom_cif_handler - rdpr %pstate, %l4 - wrpr %g0, 0x15, %pstate ! save alternate globals - stx %g1, [%sp + 2047 + 0x0b0] - stx %g2, [%sp + 2047 + 0x0b8] - stx %g3, [%sp + 2047 + 0x0c0] - stx %g4, [%sp + 2047 + 0x0c8] - stx %g5, [%sp + 2047 + 0x0d0] - stx %g6, [%sp + 2047 + 0x0d8] - stx %g7, [%sp + 2047 + 0x0e0] - wrpr %g0, 0x814, %pstate ! save interrupt globals - stx %g1, [%sp + 2047 + 0x0e8] - stx %g2, [%sp + 2047 + 0x0f0] - stx %g3, [%sp + 2047 + 0x0f8] - stx %g4, [%sp + 2047 + 0x100] - stx %g5, [%sp + 2047 + 0x108] - stx %g6, [%sp + 2047 + 0x110] - stx %g7, [%sp + 2047 + 0x118] - wrpr %g0, 0x14, %pstate ! save normal globals - stx %g1, [%sp + 2047 + 0x120] - stx %g2, [%sp + 2047 + 0x128] - stx %g3, [%sp + 2047 + 0x130] - stx %g4, [%sp + 2047 + 0x138] - stx %g5, [%sp + 2047 + 0x140] - stx %g6, [%sp + 2047 + 0x148] - stx %g7, [%sp + 2047 + 0x150] - wrpr %g0, 0x414, %pstate ! save mmu globals - stx %g1, [%sp + 2047 + 0x158] - stx %g2, [%sp + 2047 + 0x160] - stx %g3, [%sp + 2047 + 0x168] - stx %g4, [%sp + 2047 + 0x170] - stx %g5, [%sp + 2047 + 0x178] - stx %g6, [%sp + 2047 + 0x180] - stx %g7, [%sp + 2047 + 0x188] - mov %g1, %l0 ! also save to locals, so we can handle - mov %g2, %l1 ! tlb faults later on, when accessing - mov %g3, %l3 ! the stack. - mov %g7, %l5 - wrpr %l4, PSTATE_IE, %pstate ! turn off interrupts + mov %g4, %l0 + mov %g5, %l1 + mov %g6, %l3 call %l2 add %i0, 0x018, %o0 ! prom_args - wrpr %g0, 0x414, %pstate ! restore mmu globals - mov %l0, %g1 - mov %l1, %g2 - mov %l3, %g3 - mov %l5, %g7 - wrpr %g0, 0x14, %pstate ! restore normal globals - ldx [%sp + 2047 + 0x120], %g1 - ldx [%sp + 2047 + 0x128], %g2 - ldx [%sp + 2047 + 0x130], %g3 - ldx [%sp + 2047 + 0x138], %g4 - ldx [%sp + 2047 + 0x140], %g5 - ldx [%sp + 2047 + 0x148], %g6 - ldx [%sp + 2047 + 0x150], %g7 - wrpr %g0, 0x814, %pstate ! restore interrupt globals - ldx [%sp + 2047 + 0x0e8], %g1 - ldx [%sp + 2047 + 0x0f0], %g2 - ldx [%sp + 2047 + 0x0f8], %g3 - ldx [%sp + 2047 + 0x100], %g4 - ldx [%sp + 2047 + 0x108], %g5 - ldx [%sp + 2047 + 0x110], %g6 - ldx [%sp + 2047 + 0x118], %g7 - wrpr %g0, 0x15, %pstate ! restore alternate globals - ldx [%sp + 2047 + 0x0b0], %g1 - ldx [%sp + 2047 + 0x0b8], %g2 - ldx [%sp + 2047 + 0x0c0], %g3 - ldx [%sp + 2047 + 0x0c8], %g4 - ldx [%sp + 2047 + 0x0d0], %g5 - ldx [%sp + 2047 + 0x0d8], %g6 - ldx [%sp + 2047 + 0x0e0], %g7 - wrpr %l4, 0, %pstate ! restore original pstate + mov %l0, %g4 + mov %l1, %g5 + mov %l3, %g6 ret restore @@ -91,135 +31,18 @@ prom_cif_interface: prom_cif_callback: sethi %hi(p1275buf), %o1 or %o1, %lo(p1275buf), %o1 - save %sp, -0x270, %sp - rdpr %pstate, %l4 - wrpr %g0, 0x15, %pstate ! save PROM alternate globals - stx %g1, [%sp + 2047 + 0x0b0] - stx %g2, [%sp + 2047 + 0x0b8] - stx %g3, [%sp + 2047 + 0x0c0] - stx %g4, [%sp + 2047 + 0x0c8] - stx %g5, [%sp + 2047 + 0x0d0] - stx %g6, [%sp + 2047 + 0x0d8] - stx %g7, [%sp + 2047 + 0x0e0] - ! restore Linux alternate globals - ldx [%sp + 2047 + 0x190], %g1 - ldx [%sp + 2047 + 0x198], %g2 - ldx [%sp + 2047 + 0x1a0], %g3 - ldx [%sp + 2047 + 0x1a8], %g4 - ldx [%sp + 2047 + 0x1b0], %g5 - ldx [%sp + 2047 + 0x1b8], %g6 - ldx [%sp + 2047 + 0x1c0], %g7 - wrpr %g0, 0x814, %pstate ! save PROM interrupt globals - stx %g1, [%sp + 2047 + 0x0e8] - stx %g2, [%sp + 2047 + 0x0f0] - stx %g3, [%sp + 2047 + 0x0f8] - stx %g4, [%sp + 2047 + 0x100] - stx %g5, [%sp + 2047 + 0x108] - stx %g6, [%sp + 2047 + 0x110] - stx %g7, [%sp + 2047 + 0x118] - ! restore Linux interrupt globals - ldx [%sp + 2047 + 0x1c8], %g1 - ldx [%sp + 2047 + 0x1d0], %g2 - ldx [%sp + 2047 + 0x1d8], %g3 - ldx [%sp + 2047 + 0x1e0], %g4 - ldx [%sp + 2047 + 0x1e8], %g5 - ldx [%sp + 2047 + 0x1f0], %g6 - ldx [%sp + 2047 + 0x1f8], %g7 - wrpr %g0, 0x14, %pstate ! save PROM normal globals - stx %g1, [%sp + 2047 + 0x120] - stx %g2, [%sp + 2047 + 0x128] - stx %g3, [%sp + 2047 + 0x130] - stx %g4, [%sp + 2047 + 0x138] - stx %g5, [%sp + 2047 + 0x140] - stx %g6, [%sp + 2047 + 0x148] - stx %g7, [%sp + 2047 + 0x150] - ! restore Linux normal globals - ldx [%sp + 2047 + 0x200], %g1 - ldx [%sp + 2047 + 0x208], %g2 - ldx [%sp + 2047 + 0x210], %g3 - ldx [%sp + 2047 + 0x218], %g4 - ldx [%sp + 2047 + 0x220], %g5 - ldx [%sp + 2047 + 0x228], %g6 - ldx [%sp + 2047 + 0x230], %g7 - wrpr %g0, 0x414, %pstate ! save PROM mmu globals - stx %g1, [%sp + 2047 + 0x158] - stx %g2, [%sp + 2047 + 0x160] - stx %g3, [%sp + 2047 + 0x168] - stx %g4, [%sp + 2047 + 0x170] - stx %g5, [%sp + 2047 + 0x178] - stx %g6, [%sp + 2047 + 0x180] - stx %g7, [%sp + 2047 + 0x188] - ! restore Linux mmu globals - ldx [%sp + 2047 + 0x238], %o0 - ldx [%sp + 2047 + 0x240], %o1 - ldx [%sp + 2047 + 0x248], %l2 - ldx [%sp + 2047 + 0x250], %l3 - ldx [%sp + 2047 + 0x258], %l5 - ldx [%sp + 2047 + 0x260], %l6 - ldx [%sp + 2047 + 0x268], %l7 - ! switch to Linux tba - sethi %hi(sparc64_ttable_tl0), %l1 - rdpr %tba, %l0 ! save PROM tba - mov %o0, %g1 - mov %o1, %g2 - mov %l2, %g3 - mov %l3, %g4 - mov %l5, %g5 - mov %l6, %g6 - mov %l7, %g7 - wrpr %l1, %tba ! install Linux tba - wrpr %l4, 0, %pstate ! restore PSTATE + save %sp, -192, %sp + TRAP_LOAD_THREAD_REG(%g6, %g1) + LOAD_PER_CPU_BASE(%g5, %g6, %g4, %g3, %o0) + ldx [%g6 + TI_TASK], %g4 call prom_world - mov %g0, %o0 + mov 0, %o0 ldx [%i1 + 0x000], %l2 call %l2 mov %i0, %o0 mov %o0, %l1 call prom_world - or %g0, 1, %o0 - wrpr %g0, 0x14, %pstate ! interrupts off - ! restore PROM mmu globals - ldx [%sp + 2047 + 0x158], %o0 - ldx [%sp + 2047 + 0x160], %o1 - ldx [%sp + 2047 + 0x168], %l2 - ldx [%sp + 2047 + 0x170], %l3 - ldx [%sp + 2047 + 0x178], %l5 - ldx [%sp + 2047 + 0x180], %l6 - ldx [%sp + 2047 + 0x188], %l7 - wrpr %g0, 0x414, %pstate ! restore PROM mmu globals - mov %o0, %g1 - mov %o1, %g2 - mov %l2, %g3 - mov %l3, %g4 - mov %l5, %g5 - mov %l6, %g6 - mov %l7, %g7 - wrpr %l0, %tba ! restore PROM tba - wrpr %g0, 0x14, %pstate ! restore PROM normal globals - ldx [%sp + 2047 + 0x120], %g1 - ldx [%sp + 2047 + 0x128], %g2 - ldx [%sp + 2047 + 0x130], %g3 - ldx [%sp + 2047 + 0x138], %g4 - ldx [%sp + 2047 + 0x140], %g5 - ldx [%sp + 2047 + 0x148], %g6 - ldx [%sp + 2047 + 0x150], %g7 - wrpr %g0, 0x814, %pstate ! restore PROM interrupt globals - ldx [%sp + 2047 + 0x0e8], %g1 - ldx [%sp + 2047 + 0x0f0], %g2 - ldx [%sp + 2047 + 0x0f8], %g3 - ldx [%sp + 2047 + 0x100], %g4 - ldx [%sp + 2047 + 0x108], %g5 - ldx [%sp + 2047 + 0x110], %g6 - ldx [%sp + 2047 + 0x118], %g7 - wrpr %g0, 0x15, %pstate ! restore PROM alternate globals - ldx [%sp + 2047 + 0x0b0], %g1 - ldx [%sp + 2047 + 0x0b8], %g2 - ldx [%sp + 2047 + 0x0c0], %g3 - ldx [%sp + 2047 + 0x0c8], %g4 - ldx [%sp + 2047 + 0x0d0], %g5 - ldx [%sp + 2047 + 0x0d8], %g6 - ldx [%sp + 2047 + 0x0e0], %g7 - wrpr %l4, 0, %pstate + mov 1, %o0 ret restore %l1, 0, %o0 -- cgit v1.2.3-18-g5258 From 840aaef8db32572b6d11e0d5cb5e6efcbc812000 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 6 Feb 2006 15:52:05 -0800 Subject: [SPARC64]: Add missing memory barriers to instruction patching functions. V9 requires a write memory barrier before the instruction flush. Signed-off-by: David S. Miller --- arch/sparc64/kernel/setup.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index e22bf5fc92c..40acac5b833 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -529,15 +529,19 @@ static void __init per_cpu_patch(void) }; *(unsigned int *) (addr + 0) = insns[0]; + wmb(); __asm__ __volatile__("flush %0" : : "r" (addr + 0)); *(unsigned int *) (addr + 4) = insns[1]; + wmb(); __asm__ __volatile__("flush %0" : : "r" (addr + 4)); *(unsigned int *) (addr + 8) = insns[2]; + wmb(); __asm__ __volatile__("flush %0" : : "r" (addr + 8)); *(unsigned int *) (addr + 12) = insns[3]; + wmb(); __asm__ __volatile__("flush %0" : : "r" (addr + 12)); p++; @@ -558,6 +562,7 @@ static void __init gl_patch(void) unsigned long addr = p1->addr; *(unsigned int *) (addr + 0) = p1->insn; + wmb(); __asm__ __volatile__("flush %0" : : "r" (addr + 0)); p1++; @@ -568,9 +573,11 @@ static void __init gl_patch(void) unsigned long addr = p2->addr; *(unsigned int *) (addr + 0) = p2->insns[0]; + wmb(); __asm__ __volatile__("flush %0" : : "r" (addr + 0)); *(unsigned int *) (addr + 3) = p2->insns[1]; + wmb(); __asm__ __volatile__("flush %0" : : "r" (addr + 4)); p2++; -- cgit v1.2.3-18-g5258 From d257d5da39a78b32721ca84b2ba7f461f2f7ed7f Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 6 Feb 2006 23:44:37 -0800 Subject: [SPARC64]: Initial sun4v TLB miss handling infrastructure. Things are a little tricky because, unlike sun4u, we have to: 1) do a hypervisor trap to do the TLB load. 2) do the TSB lookup calculations by hand Signed-off-by: David S. Miller --- arch/sparc64/kernel/head.S | 1 + arch/sparc64/kernel/ktlb.S | 12 +- arch/sparc64/kernel/sun4v_tlb_miss.S | 219 +++++++++++++++++++++++++++++++++++ arch/sparc64/kernel/tsb.S | 89 +++++++++++--- arch/sparc64/kernel/vmlinux.lds.S | 3 + arch/sparc64/mm/init.c | 24 +++- 6 files changed, 332 insertions(+), 16 deletions(-) create mode 100644 arch/sparc64/kernel/sun4v_tlb_miss.S (limited to 'arch') diff --git a/arch/sparc64/kernel/head.S b/arch/sparc64/kernel/head.S index 7840271d7aa..03fc0b5b1d9 100644 --- a/arch/sparc64/kernel/head.S +++ b/arch/sparc64/kernel/head.S @@ -474,6 +474,7 @@ setup_tba: sparc64_boot_end: #include "systbls.S" +#include "sun4v_tlb_miss.S" #include "ktlb.S" #include "tsb.S" #include "etrap.S" diff --git a/arch/sparc64/kernel/ktlb.S b/arch/sparc64/kernel/ktlb.S index c1335432124..2e55084a0c1 100644 --- a/arch/sparc64/kernel/ktlb.S +++ b/arch/sparc64/kernel/ktlb.S @@ -16,12 +16,16 @@ .text .align 32 - .globl kvmap_itlb kvmap_itlb: /* g6: TAG TARGET */ mov TLB_TAG_ACCESS, %g4 ldxa [%g4] ASI_IMMU, %g4 + /* sun4v_itlb_miss branches here with the missing virtual + * address already loaded into %g4 + */ +kvmap_itlb_4v: + kvmap_itlb_nonlinear: /* Catch kernel NULL pointer calls. */ sethi %hi(PAGE_SIZE), %g5 @@ -94,11 +98,15 @@ kvmap_dtlb_obp: nop .align 32 - .globl kvmap_dtlb kvmap_dtlb: /* %g6: TAG TARGET */ mov TLB_TAG_ACCESS, %g4 ldxa [%g4] ASI_DMMU, %g4 + + /* sun4v_dtlb_miss branches here with the missing virtual + * address already loaded into %g4 + */ +kvmap_dtlb_4v: brgez,pn %g4, kvmap_dtlb_nonlinear nop diff --git a/arch/sparc64/kernel/sun4v_tlb_miss.S b/arch/sparc64/kernel/sun4v_tlb_miss.S new file mode 100644 index 00000000000..58ea5dd8573 --- /dev/null +++ b/arch/sparc64/kernel/sun4v_tlb_miss.S @@ -0,0 +1,219 @@ +/* sun4v_tlb_miss.S: Sun4v TLB miss handlers. + * + * Copyright (C) 2006 + */ + + .text + .align 32 + +sun4v_itlb_miss: + /* Load CPU ID into %g3. */ + mov SCRATCHPAD_CPUID, %g1 + ldxa [%g1] ASI_SCRATCHPAD, %g3 + + /* Load UTSB reg into %g1. */ + ldxa [%g1 + %g1] ASI_SCRATCHPAD, %g1 + + /* Load &trap_block[smp_processor_id()] into %g2. */ + sethi %hi(trap_block), %g2 + or %g2, %lo(trap_block), %g2 + sllx %g3, TRAP_BLOCK_SZ_SHIFT, %g3 + add %g2, %g3, %g2 + + /* Create a TAG TARGET, "(vaddr>>22) | (ctx << 48)", in %g6. + * Branch if kernel TLB miss. The kernel TSB and user TSB miss + * code wants the missing virtual address in %g4, so that value + * cannot be modified through the entirety of this handler. + */ + ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_I_ADDR_OFFSET], %g4 + ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_I_CTX_OFFSET], %g5 + srlx %g4, 22, %g3 + sllx %g5, 48, %g6 + or %g6, %g3, %g6 + brz,pn %g5, kvmap_itlb_4v + nop + + /* Create TSB pointer. This is something like: + * + * index_mask = (512 << (tsb_reg & 0x7UL)) - 1UL; + * tsb_base = tsb_reg & ~0x7UL; + */ + and %g1, 0x7, %g3 + andn %g1, 0x7, %g1 + mov 512, %g7 + sllx %g7, %g3, %g7 + sub %g7, 1, %g7 + + /* TSB index mask is in %g7, tsb base is in %g1. Compute + * the TSB entry pointer into %g1: + * + * tsb_index = ((vaddr >> PAGE_SHIFT) & tsb_mask); + * tsb_ptr = tsb_base + (tsb_index * 16); + */ + srlx %g4, PAGE_SHIFT, %g3 + and %g3, %g7, %g3 + sllx %g3, 4, %g3 + add %g1, %g3, %g1 + + /* Load TSB tag/pte into %g2/%g3 and compare the tag. */ + ldda [%g1] ASI_QUAD_LDD_PHYS, %g2 + cmp %g2, %g6 + sethi %hi(_PAGE_EXEC), %g7 + bne,a,pn %xcc, tsb_miss_page_table_walk + mov FAULT_CODE_ITLB, %g3 + andcc %g3, %g7, %g0 + be,a,pn %xcc, tsb_do_fault + mov FAULT_CODE_ITLB, %g3 + + /* We have a valid entry, make hypervisor call to load + * I-TLB and return from trap. + * + * %g3: PTE + * %g4: vaddr + * %g6: TAG TARGET (only "CTX << 48" part matters) + */ +sun4v_itlb_load: + mov %o0, %g1 ! save %o0 + mov %o1, %g2 ! save %o1 + mov %o2, %g5 ! save %o2 + mov %o3, %g7 ! save %o3 + mov %g4, %o0 ! vaddr + srlx %g6, 48, %o1 ! ctx + mov %g3, %o2 ! PTE + mov HV_MMU_IMMU, %o3 ! flags + ta HV_MMU_MAP_ADDR_TRAP + mov %g1, %o0 ! restore %o0 + mov %g2, %o1 ! restore %o1 + mov %g5, %o2 ! restore %o2 + mov %g7, %o3 ! restore %o3 + + retry + +sun4v_dtlb_miss: + /* Load CPU ID into %g3. */ + mov SCRATCHPAD_CPUID, %g1 + ldxa [%g1] ASI_SCRATCHPAD, %g3 + + /* Load UTSB reg into %g1. */ + ldxa [%g1 + %g1] ASI_SCRATCHPAD, %g1 + + /* Load &trap_block[smp_processor_id()] into %g2. */ + sethi %hi(trap_block), %g2 + or %g2, %lo(trap_block), %g2 + sllx %g3, TRAP_BLOCK_SZ_SHIFT, %g3 + add %g2, %g3, %g2 + + /* Create a TAG TARGET, "(vaddr>>22) | (ctx << 48)", in %g6. + * Branch if kernel TLB miss. The kernel TSB and user TSB miss + * code wants the missing virtual address in %g4, so that value + * cannot be modified through the entirety of this handler. + */ + ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_D_ADDR_OFFSET], %g4 + ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_D_CTX_OFFSET], %g5 + srlx %g4, 22, %g3 + sllx %g5, 48, %g6 + or %g6, %g3, %g6 + brz,pn %g5, kvmap_dtlb_4v + nop + + /* Create TSB pointer. This is something like: + * + * index_mask = (512 << (tsb_reg & 0x7UL)) - 1UL; + * tsb_base = tsb_reg & ~0x7UL; + */ + and %g1, 0x7, %g3 + andn %g1, 0x7, %g1 + mov 512, %g7 + sllx %g7, %g3, %g7 + sub %g7, 1, %g7 + + /* TSB index mask is in %g7, tsb base is in %g1. Compute + * the TSB entry pointer into %g1: + * + * tsb_index = ((vaddr >> PAGE_SHIFT) & tsb_mask); + * tsb_ptr = tsb_base + (tsb_index * 16); + */ + srlx %g4, PAGE_SHIFT, %g3 + and %g3, %g7, %g3 + sllx %g3, 4, %g3 + add %g1, %g3, %g1 + + /* Load TSB tag/pte into %g2/%g3 and compare the tag. */ + ldda [%g1] ASI_QUAD_LDD_PHYS, %g2 + cmp %g2, %g6 + bne,a,pn %xcc, tsb_miss_page_table_walk + mov FAULT_CODE_ITLB, %g3 + + /* We have a valid entry, make hypervisor call to load + * D-TLB and return from trap. + * + * %g3: PTE + * %g4: vaddr + * %g6: TAG TARGET (only "CTX << 48" part matters) + */ +sun4v_dtlb_load: + mov %o0, %g1 ! save %o0 + mov %o1, %g2 ! save %o1 + mov %o2, %g5 ! save %o2 + mov %o3, %g7 ! save %o3 + mov %g4, %o0 ! vaddr + srlx %g6, 48, %o1 ! ctx + mov %g3, %o2 ! PTE + mov HV_MMU_DMMU, %o3 ! flags + ta HV_MMU_MAP_ADDR_TRAP + mov %g1, %o0 ! restore %o0 + mov %g2, %o1 ! restore %o1 + mov %g5, %o2 ! restore %o2 + mov %g7, %o3 ! restore %o3 + + retry + +sun4v_dtlb_prot: + /* Load CPU ID into %g3. */ + mov SCRATCHPAD_CPUID, %g1 + ldxa [%g1] ASI_SCRATCHPAD, %g3 + + /* Load &trap_block[smp_processor_id()] into %g2. */ + sethi %hi(trap_block), %g2 + or %g2, %lo(trap_block), %g2 + sllx %g3, TRAP_BLOCK_SZ_SHIFT, %g3 + add %g2, %g3, %g2 + + ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_D_ADDR_OFFSET], %g5 + rdpr %tl, %g1 + cmp %g1, 1 + bgu,pn %xcc, winfix_trampoline + nop + ba,pt %xcc, sparc64_realfault_common + mov FAULT_CODE_DTLB | FAULT_CODE_WRITE, %g4 + +#define BRANCH_ALWAYS 0x10680000 +#define NOP 0x01000000 +#define SUN4V_DO_PATCH(OLD, NEW) \ + sethi %hi(NEW), %g1; \ + or %g1, %lo(NEW), %g1; \ + sethi %hi(OLD), %g2; \ + or %g2, %lo(OLD), %g2; \ + sub %g1, %g2, %g1; \ + sethi %hi(BRANCH_ALWAYS), %g3; \ + srl %g1, 2, %g1; \ + or %g3, %lo(BRANCH_ALWAYS), %g3; \ + or %g3, %g1, %g3; \ + stw %g3, [%g2]; \ + sethi %hi(NOP), %g3; \ + or %g3, %lo(NOP), %g3; \ + stw %g3, [%g2 + 0x4]; \ + flush %g2; + + .globl sun4v_patch_tlb_handlers + .type sun4v_patch_tlb_handlers,#function +sun4v_patch_tlb_handlers: + SUN4V_DO_PATCH(tl0_iamiss, sun4v_itlb_miss) + SUN4V_DO_PATCH(tl1_iamiss, sun4v_itlb_miss) + SUN4V_DO_PATCH(tl0_damiss, sun4v_dtlb_miss) + SUN4V_DO_PATCH(tl1_damiss, sun4v_dtlb_miss) + SUN4V_DO_PATCH(tl0_daprot, sun4v_dtlb_prot) + SUN4V_DO_PATCH(tl1_daprot, sun4v_dtlb_prot) + retl + nop + .size sun4v_patch_tlb_handlers,.-sun4v_patch_tlb_handlers diff --git a/arch/sparc64/kernel/tsb.S b/arch/sparc64/kernel/tsb.S index 96e63168d8b..818bc9e9135 100644 --- a/arch/sparc64/kernel/tsb.S +++ b/arch/sparc64/kernel/tsb.S @@ -18,30 +18,33 @@ * %g4: available temporary * %g5: available temporary * %g6: TAG TARGET - * %g7: physical address base of the linux page + * %g7: available temporary, will be loaded by us with + * the physical address base of the linux page * tables for the current address space */ - .globl tsb_miss_dtlb tsb_miss_dtlb: mov TLB_TAG_ACCESS, %g4 ldxa [%g4] ASI_DMMU, %g4 ba,pt %xcc, tsb_miss_page_table_walk nop - .globl tsb_miss_itlb tsb_miss_itlb: mov TLB_TAG_ACCESS, %g4 ldxa [%g4] ASI_IMMU, %g4 ba,pt %xcc, tsb_miss_page_table_walk nop + /* The sun4v TLB miss handlers jump directly here instead + * of tsb_miss_{d,i}tlb with the missing virtual address + * already loaded into %g4. + */ tsb_miss_page_table_walk: TRAP_LOAD_PGD_PHYS(%g7, %g5) USER_PGTABLE_WALK_TL1(%g4, %g7, %g5, %g2, tsb_do_fault) tsb_reload: - TSB_LOCK_TAG(%g1, %g2, %g4) + TSB_LOCK_TAG(%g1, %g2, %g7) /* Load and check PTE. */ ldxa [%g5] ASI_PHYS_USE_EC, %g5 @@ -52,9 +55,9 @@ tsb_reload: * bother putting it into the TSB. */ srlx %g5, 32, %g2 - sethi %hi(_PAGE_ALL_SZ_BITS >> 32), %g4 + sethi %hi(_PAGE_ALL_SZ_BITS >> 32), %g7 + and %g2, %g7, %g2 sethi %hi(_PAGE_SZBITS >> 32), %g7 - and %g2, %g4, %g2 cmp %g2, %g7 bne,a,pn %xcc, tsb_tlb_reload TSB_STORE(%g1, %g0) @@ -68,12 +71,54 @@ tsb_tlb_reload: nop tsb_dtlb_load: - stxa %g5, [%g0] ASI_DTLB_DATA_IN + +661: stxa %g5, [%g0] ASI_DTLB_DATA_IN retry + .section .gl_2insn_patch, "ax" + .word 661b + nop + nop + .previous + + /* For sun4v the ASI_DTLB_DATA_IN store and the retry + * instruction get nop'd out and we get here to branch + * to the sun4v tlb load code. The registers are setup + * as follows: + * + * %g4: vaddr + * %g5: PTE + * %g6: TAG + * + * The sun4v TLB load wants the PTE in %g3 so we fix that + * up here. + */ + ba,pt %xcc, sun4v_dtlb_load + mov %g5, %g3 tsb_itlb_load: - stxa %g5, [%g0] ASI_ITLB_DATA_IN + +661: stxa %g5, [%g0] ASI_ITLB_DATA_IN retry + .section .gl_2insn_patch, "ax" + .word 661b + nop + nop + .previous + + /* For sun4v the ASI_ITLB_DATA_IN store and the retry + * instruction get nop'd out and we get here to branch + * to the sun4v tlb load code. The registers are setup + * as follows: + * + * %g4: vaddr + * %g5: PTE + * %g6: TAG + * + * The sun4v TLB load wants the PTE in %g3 so we fix that + * up here. + */ + ba,pt %xcc, sun4v_itlb_load + mov %g5, %g3 /* No valid entry in the page tables, do full fault * processing. @@ -95,10 +140,17 @@ tsb_do_fault: nop tsb_do_dtlb_fault: - rdpr %tl, %g4 - cmp %g4, 1 - mov TLB_TAG_ACCESS, %g4 + rdpr %tl, %g3 + cmp %g3, 1 + +661: mov TLB_TAG_ACCESS, %g4 ldxa [%g4] ASI_DMMU, %g5 + .section .gl_2insn_patch, "ax" + .word 661b + mov %g4, %g5 + nop + .previous + be,pt %xcc, sparc64_realfault_common mov FAULT_CODE_DTLB, %g4 ba,pt %xcc, winfix_trampoline @@ -196,12 +248,23 @@ __tsb_context_switch: add %g2, %g1, %g2 stx %o0, [%g2 + TRAP_PER_CPU_PGD_PADDR] - mov TSB_REG, %g1 +661: mov TSB_REG, %g1 stxa %o1, [%g1] ASI_DMMU + .section .gl_2insn_patch, "ax" + .word 661b + mov SCRATCHPAD_UTSBREG1, %g1 + stxa %o1, [%g1] ASI_SCRATCHPAD + .previous + membar #Sync - stxa %o1, [%g1] ASI_IMMU +661: stxa %o1, [%g1] ASI_IMMU membar #Sync + .section .gl_2insn_patch, "ax" + .word 661b + nop + nop + .previous brz %o2, 9f nop diff --git a/arch/sparc64/kernel/vmlinux.lds.S b/arch/sparc64/kernel/vmlinux.lds.S index 686bf6b3b03..a09a8a2383d 100644 --- a/arch/sparc64/kernel/vmlinux.lds.S +++ b/arch/sparc64/kernel/vmlinux.lds.S @@ -71,6 +71,9 @@ SECTIONS __con_initcall_end = .; SECURITY_INIT . = ALIGN(4); + __tsb_ldquad_phys_patch = .; + .tsb_ldquad_phys_patch : { *(.tsb_ldquad_phys_patch) } + __tsb_ldquad_phys_patch_end = .; __tsb_phys_patch = .; .tsb_phys_patch : { *(.tsb_phys_patch) } __tsb_phys_patch_end = .; diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index ab50cd9618f..e9aac424877 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -1050,8 +1050,25 @@ unsigned long __init find_ecache_flush_span(unsigned long size) static void __init tsb_phys_patch(void) { + struct tsb_ldquad_phys_patch_entry *pquad; struct tsb_phys_patch_entry *p; + pquad = &__tsb_ldquad_phys_patch; + while (pquad < &__tsb_ldquad_phys_patch_end) { + unsigned long addr = pquad->addr; + + if (tlb_type == hypervisor) + *(unsigned int *) addr = pquad->sun4v_insn; + else + *(unsigned int *) addr = pquad->sun4u_insn; + wmb(); + __asm__ __volatile__("flush %0" + : /* no outputs */ + : "r" (addr)); + + pquad++; + } + p = &__tsb_phys_patch; while (p < &__tsb_phys_patch_end) { unsigned long addr = p->addr; @@ -1069,6 +1086,7 @@ static void __init tsb_phys_patch(void) /* paging_init() sets up the page tables */ extern void cheetah_ecache_flush_init(void); +extern void sun4v_patch_tlb_handlers(void); static unsigned long last_valid_pfn; pgd_t swapper_pg_dir[2048]; @@ -1078,9 +1096,13 @@ void __init paging_init(void) unsigned long end_pfn, pages_avail, shift; unsigned long real_end, i; - if (tlb_type == cheetah_plus) + if (tlb_type == cheetah_plus || + tlb_type == hypervisor) tsb_phys_patch(); + if (tlb_type == hypervisor) + sun4v_patch_tlb_handlers(); + /* Find available physical memory... */ read_obp_memory("available", &pavail[0], &pavail_ents); -- cgit v1.2.3-18-g5258 From df7d6aec96ab98cb182dd5138a85bdc363a9bf0d Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 7 Feb 2006 00:00:16 -0800 Subject: [SPARC64]: Rename gl_{1,2}insn_patch --> sun4v_{1,2}insn_patch Signed-off-by: David S. Miller --- arch/sparc64/kernel/etrap.S | 4 ++-- arch/sparc64/kernel/ktlb.S | 4 ++-- arch/sparc64/kernel/rtrap.S | 4 ++-- arch/sparc64/kernel/setup.c | 16 ++++++++-------- arch/sparc64/kernel/tsb.S | 12 ++++++------ arch/sparc64/kernel/vmlinux.lds.S | 12 ++++++------ arch/sparc64/mm/ultra.S | 4 ++-- 7 files changed, 28 insertions(+), 28 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/etrap.S b/arch/sparc64/kernel/etrap.S index 4d644949ad4..d8c062a1700 100644 --- a/arch/sparc64/kernel/etrap.S +++ b/arch/sparc64/kernel/etrap.S @@ -105,7 +105,7 @@ etrap_save: save %g2, -STACK_BIAS, %sp /* Go to trap time globals so we can save them. */ 661: wrpr %g0, ETRAP_PSTATE1, %pstate - .section .gl_1insn_patch, "ax" + .section .sun4v_1insn_patch, "ax" .word 661b SET_GL(0) .previous @@ -206,7 +206,7 @@ etraptl1: /* Save tstate/tpc/tnpc of TL 1-->4 and the tl register itself. wrpr %g0, 1, %tl 661: nop - .section .gl_1insn_patch, "ax" + .section .sun4v_1insn_patch, "ax" .word 661b SET_GL(1) .previous diff --git a/arch/sparc64/kernel/ktlb.S b/arch/sparc64/kernel/ktlb.S index 2e55084a0c1..f6bb2e08964 100644 --- a/arch/sparc64/kernel/ktlb.S +++ b/arch/sparc64/kernel/ktlb.S @@ -67,7 +67,7 @@ kvmap_itlb_longpath: 661: rdpr %pstate, %g5 wrpr %g5, PSTATE_AG | PSTATE_MG, %pstate - .section .gl_2insn_patch, "ax" + .section .sun4v_2insn_patch, "ax" .word 661b nop nop @@ -179,7 +179,7 @@ kvmap_dtlb_longpath: 661: rdpr %pstate, %g5 wrpr %g5, PSTATE_AG | PSTATE_MG, %pstate - .section .gl_2insn_patch, "ax" + .section .sun4v_2insn_patch, "ax" .word 661b nop nop diff --git a/arch/sparc64/kernel/rtrap.S b/arch/sparc64/kernel/rtrap.S index a2fa277da62..a55d517e76a 100644 --- a/arch/sparc64/kernel/rtrap.S +++ b/arch/sparc64/kernel/rtrap.S @@ -234,7 +234,7 @@ rt_continue: ldx [%sp + PTREGS_OFF + PT_V9_G1], %g1 /* Normal globals are restored, go to trap globals. */ 661: wrpr %g0, RTRAP_PSTATE_AG_IRQOFF, %pstate - .section .gl_1insn_patch, "ax" + .section .sun4v_1insn_patch, "ax" .word 661b SET_GL(1) .previous @@ -316,7 +316,7 @@ user_rtt_fill_fixup: wrpr %g0, RTRAP_PSTATE, %pstate 661: nop - .section .gl_1insn_patch, "ax" + .section .sun4v_1insn_patch, "ax" .word 661b SET_GL(0) .previous diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index 40acac5b833..6d6178efd58 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -549,16 +549,16 @@ static void __init per_cpu_patch(void) #endif } -static void __init gl_patch(void) +static void __init sun4v_patch(void) { - struct gl_1insn_patch_entry *p1; - struct gl_2insn_patch_entry *p2; + struct sun4v_1insn_patch_entry *p1; + struct sun4v_2insn_patch_entry *p2; if (tlb_type != hypervisor) return; - p1 = &__gl_1insn_patch; - while (p1 < &__gl_1insn_patch_end) { + p1 = &__sun4v_1insn_patch; + while (p1 < &__sun4v_1insn_patch_end) { unsigned long addr = p1->addr; *(unsigned int *) (addr + 0) = p1->insn; @@ -568,8 +568,8 @@ static void __init gl_patch(void) p1++; } - p2 = &__gl_2insn_patch; - while (p2 < &__gl_2insn_patch_end) { + p2 = &__sun4v_2insn_patch; + while (p2 < &__sun4v_2insn_patch_end) { unsigned long addr = p2->addr; *(unsigned int *) (addr + 0) = p2->insns[0]; @@ -606,7 +606,7 @@ void __init setup_arch(char **cmdline_p) */ per_cpu_patch(); - gl_patch(); + sun4v_patch(); boot_flags_init(*cmdline_p); diff --git a/arch/sparc64/kernel/tsb.S b/arch/sparc64/kernel/tsb.S index 818bc9e9135..819a6ef9799 100644 --- a/arch/sparc64/kernel/tsb.S +++ b/arch/sparc64/kernel/tsb.S @@ -74,7 +74,7 @@ tsb_dtlb_load: 661: stxa %g5, [%g0] ASI_DTLB_DATA_IN retry - .section .gl_2insn_patch, "ax" + .section .sun4v_2insn_patch, "ax" .word 661b nop nop @@ -99,7 +99,7 @@ tsb_itlb_load: 661: stxa %g5, [%g0] ASI_ITLB_DATA_IN retry - .section .gl_2insn_patch, "ax" + .section .sun4v_2insn_patch, "ax" .word 661b nop nop @@ -130,7 +130,7 @@ tsb_do_fault: 661: rdpr %pstate, %g5 wrpr %g5, PSTATE_AG | PSTATE_MG, %pstate - .section .gl_2insn_patch, "ax" + .section .sun4v_2insn_patch, "ax" .word 661b nop nop @@ -145,7 +145,7 @@ tsb_do_dtlb_fault: 661: mov TLB_TAG_ACCESS, %g4 ldxa [%g4] ASI_DMMU, %g5 - .section .gl_2insn_patch, "ax" + .section .sun4v_2insn_patch, "ax" .word 661b mov %g4, %g5 nop @@ -250,7 +250,7 @@ __tsb_context_switch: 661: mov TSB_REG, %g1 stxa %o1, [%g1] ASI_DMMU - .section .gl_2insn_patch, "ax" + .section .sun4v_2insn_patch, "ax" .word 661b mov SCRATCHPAD_UTSBREG1, %g1 stxa %o1, [%g1] ASI_SCRATCHPAD @@ -260,7 +260,7 @@ __tsb_context_switch: 661: stxa %o1, [%g1] ASI_IMMU membar #Sync - .section .gl_2insn_patch, "ax" + .section .sun4v_2insn_patch, "ax" .word 661b nop nop diff --git a/arch/sparc64/kernel/vmlinux.lds.S b/arch/sparc64/kernel/vmlinux.lds.S index a09a8a2383d..b097379a49a 100644 --- a/arch/sparc64/kernel/vmlinux.lds.S +++ b/arch/sparc64/kernel/vmlinux.lds.S @@ -80,12 +80,12 @@ SECTIONS __cpuid_patch = .; .cpuid_patch : { *(.cpuid_patch) } __cpuid_patch_end = .; - __gl_1insn_patch = .; - .gl_1insn_patch : { *(.gl_1insn_patch) } - __gl_1insn_patch_end = .; - __gl_2insn_patch = .; - .gl_2insn_patch : { *(.gl_2insn_patch) } - __gl_2insn_patch_end = .; + __sun4v_1insn_patch = .; + .sun4v_1insn_patch : { *(.sun4v_1insn_patch) } + __sun4v_1insn_patch_end = .; + __sun4v_2insn_patch = .; + .sun4v_2insn_patch : { *(.sun4v_2insn_patch) } + __sun4v_2insn_patch_end = .; . = ALIGN(8192); __initramfs_start = .; .init.ramfs : { *(.init.ramfs) } diff --git a/arch/sparc64/mm/ultra.S b/arch/sparc64/mm/ultra.S index 5dd86ad0d29..8c244932b1c 100644 --- a/arch/sparc64/mm/ultra.S +++ b/arch/sparc64/mm/ultra.S @@ -447,7 +447,7 @@ xcall_sync_tick: 661: rdpr %pstate, %g2 wrpr %g2, PSTATE_IG | PSTATE_AG, %pstate - .section .gl_2insn_patch, "ax" + .section .sun4v_2insn_patch, "ax" .word 661b nop nop @@ -478,7 +478,7 @@ xcall_report_regs: 661: rdpr %pstate, %g2 wrpr %g2, PSTATE_IG | PSTATE_AG, %pstate - .section .gl_2insn_patch, "ax" + .section .sun4v_2insn_patch, "ax" .word 661b nop nop -- cgit v1.2.3-18-g5258 From 8591e3027235d6d11b958e43379f2ee7b7114841 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 7 Feb 2006 16:09:12 -0800 Subject: [SPARC64]: Niagara copy/clear page. Happily we have no D-cache aliasing issues on these chips, so the implementation is very straightforward. Add a stub in bootup which will be where the patching calls will be made for niagara/sun4v/hypervisor. Signed-off-by: David S. Miller --- arch/sparc64/kernel/head.S | 18 +++++++++ arch/sparc64/lib/Makefile | 1 + arch/sparc64/lib/NGpage.S | 95 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 114 insertions(+) create mode 100644 arch/sparc64/lib/NGpage.S (limited to 'arch') diff --git a/arch/sparc64/kernel/head.S b/arch/sparc64/kernel/head.S index 03fc0b5b1d9..f04f7391f23 100644 --- a/arch/sparc64/kernel/head.S +++ b/arch/sparc64/kernel/head.S @@ -316,6 +316,24 @@ sun4u_init: ba,pt %xcc, spitfire_tlb_fixup nop + /* XXX Nothing branches to here yet, when %ver register indicates + * XXX Niagara we should do this. + */ +niagara_tlb_fixup: + mov 3, %g2 /* Set TLB type to hypervisor. */ + sethi %hi(tlb_type), %g1 + stw %g2, [%g1 + %lo(tlb_type)] + + /* Patch copy/clear ops. */ + call niagara_patch_copyops + nop + call niagara_patch_pageops + nop + + /* Patch TLB/cache ops. */ + call hypervisor_patch_cachetlbops + nop + cheetah_tlb_fixup: mov 2, %g2 /* Set TLB type to cheetah+. */ BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g1,g7,1f) diff --git a/arch/sparc64/lib/Makefile b/arch/sparc64/lib/Makefile index 813f622b5c4..3d0e9a24d7a 100644 --- a/arch/sparc64/lib/Makefile +++ b/arch/sparc64/lib/Makefile @@ -12,6 +12,7 @@ lib-y := PeeCeeI.o copy_page.o clear_page.o strlen.o strncmp.o \ U1memcpy.o U1copy_from_user.o U1copy_to_user.o \ U3memcpy.o U3copy_from_user.o U3copy_to_user.o U3patch.o \ NGmemcpy.o NGcopy_from_user.o NGcopy_to_user.o NGpatch.o \ + NGpage.o \ copy_in_user.o user_fixup.o memmove.o \ mcount.o ipcsum.o rwsem.o xor.o find_bit.o delay.o diff --git a/arch/sparc64/lib/NGpage.S b/arch/sparc64/lib/NGpage.S new file mode 100644 index 00000000000..0e6152c28b0 --- /dev/null +++ b/arch/sparc64/lib/NGpage.S @@ -0,0 +1,95 @@ +/* NGpage.S: Niagara optimize clear and copy page. + * + * Copyright (C) 2006 (davem@davemloft.net) + */ + +#include +#include + + .text + .align 32 + + /* This is heavily simplified from the sun4u variants + * because Niagara does not have any D-cache aliasing issues + * and also we don't need to use the FPU in order to implement + * an optimal page copy/clear. + */ + +NGcopy_user_page: /* %o0=dest, %o1=src, %o2=vaddr */ + prefetch [%o1 + 0x00], #one_read + mov 8, %g1 + mov 16, %g2 + mov 24, %g3 + set PAGE_SIZE, %g7 + +1: ldda [%o1 + %g0] ASI_BLK_INIT_QUAD_LDD_P, %o2 + ldda [%o1 + %g2] ASI_BLK_INIT_QUAD_LDD_P, %o4 + prefetch [%o1 + 0x40], #one_read + add %o1, 32, %o1 + stxa %o2, [%o0 + %g0] ASI_BLK_INIT_QUAD_LDD_P + stxa %o3, [%o0 + %g1] ASI_BLK_INIT_QUAD_LDD_P + ldda [%o1 + %g0] ASI_BLK_INIT_QUAD_LDD_P, %o2 + stxa %o4, [%o0 + %g2] ASI_BLK_INIT_QUAD_LDD_P + stxa %o5, [%o0 + %g3] ASI_BLK_INIT_QUAD_LDD_P + ldda [%o1 + %g2] ASI_BLK_INIT_QUAD_LDD_P, %o4 + add %o1, 32, %o1 + add %o0, 32, %o0 + stxa %o2, [%o0 + %g0] ASI_BLK_INIT_QUAD_LDD_P + stxa %o3, [%o0 + %g1] ASI_BLK_INIT_QUAD_LDD_P + stxa %o4, [%o0 + %g2] ASI_BLK_INIT_QUAD_LDD_P + stxa %o5, [%o0 + %g3] ASI_BLK_INIT_QUAD_LDD_P + subcc %g7, 64, %g7 + bne,pt %xcc, 1b + add %o0, 32, %o0 + retl + nop + +NGclear_page: /* %o0=dest */ +NGclear_user_page: /* %o0=dest, %o1=vaddr */ + mov 8, %g1 + mov 16, %g2 + mov 24, %g3 + set PAGE_SIZE, %g7 + +1: stxa %g0, [%o0 + %g0] ASI_BLK_INIT_QUAD_LDD_P + stxa %g0, [%o0 + %g1] ASI_BLK_INIT_QUAD_LDD_P + stxa %g0, [%o0 + %g2] ASI_BLK_INIT_QUAD_LDD_P + stxa %g0, [%o0 + %g3] ASI_BLK_INIT_QUAD_LDD_P + add %o0, 32, %o0 + stxa %g0, [%o0 + %g0] ASI_BLK_INIT_QUAD_LDD_P + stxa %g0, [%o0 + %g1] ASI_BLK_INIT_QUAD_LDD_P + stxa %g0, [%o0 + %g2] ASI_BLK_INIT_QUAD_LDD_P + stxa %g0, [%o0 + %g3] ASI_BLK_INIT_QUAD_LDD_P + subcc %g7, 64, %g7 + bne,pt %xcc, 1b + add %o0, 32, %o0 + retl + nop + +#define BRANCH_ALWAYS 0x10680000 +#define NOP 0x01000000 +#define NG_DO_PATCH(OLD, NEW) \ + sethi %hi(NEW), %g1; \ + or %g1, %lo(NEW), %g1; \ + sethi %hi(OLD), %g2; \ + or %g2, %lo(OLD), %g2; \ + sub %g1, %g2, %g1; \ + sethi %hi(BRANCH_ALWAYS), %g3; \ + srl %g1, 2, %g1; \ + or %g3, %lo(BRANCH_ALWAYS), %g3; \ + or %g3, %g1, %g3; \ + stw %g3, [%g2]; \ + sethi %hi(NOP), %g3; \ + or %g3, %lo(NOP), %g3; \ + stw %g3, [%g2 + 0x4]; \ + flush %g2; + + .globl niagara_patch_pageops + .type niagara_patch_pageops,#function +niagara_patch_pageops: + NG_DO_PATCH(copy_user_page, NGcopy_user_page) + NG_DO_PATCH(_clear_page, NGclear_page) + NG_DO_PATCH(clear_user_page, NGclear_user_page) + retl + nop + .size niagara_patch_pageops,.-niagara_patch_pageops -- cgit v1.2.3-18-g5258 From 481295f982b21b1dbe71cbf41d3a93028fee30d1 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 7 Feb 2006 21:51:08 -0800 Subject: [SPARC64]: Register per-cpu fault status area with sun4v hypervisor. Signed-off-by: David S. Miller --- arch/sparc64/kernel/smp.c | 3 +++ arch/sparc64/mm/init.c | 29 +++++++++++++++++++++++++---- 2 files changed, 28 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index aba0f886b05..223cc6bd369 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -122,6 +122,9 @@ void __init smp_callin(void) __local_per_cpu_offset = __per_cpu_offset(cpuid); + if (tlb_type == hypervisor) + sun4v_register_fault_status(); + __flush_tlb_all(); smp_setup_percpu_timer(); diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index e9aac424877..4c95cf34075 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -40,6 +40,7 @@ #include #include #include +#include extern void device_scan(void); @@ -1083,6 +1084,24 @@ static void __init tsb_phys_patch(void) } } +/* Register this cpu's fault status area with the hypervisor. */ +void __cpuinit sun4v_register_fault_status(void) +{ + register unsigned long arg0 asm("%o0"); + register unsigned long arg1 asm("%o1"); + int cpu = hard_smp_processor_id(); + struct trap_per_cpu *tb = &trap_block[cpu]; + unsigned long pa; + + pa = kern_base + ((unsigned long) tb - KERNBASE); + arg0 = HV_FAST_MMU_FAULT_AREA_CONF; + arg1 = pa; + __asm__ __volatile__("ta %4" + : "=&r" (arg0), "=&r" (arg1) + : "0" (arg0), "1" (arg1), + "i" (HV_FAST_TRAP)); +} + /* paging_init() sets up the page tables */ extern void cheetah_ecache_flush_init(void); @@ -1096,12 +1115,17 @@ void __init paging_init(void) unsigned long end_pfn, pages_avail, shift; unsigned long real_end, i; + kern_base = (prom_boot_mapping_phys_low >> 22UL) << 22UL; + kern_size = (unsigned long)&_end - (unsigned long)KERNBASE; + if (tlb_type == cheetah_plus || tlb_type == hypervisor) tsb_phys_patch(); - if (tlb_type == hypervisor) + if (tlb_type == hypervisor) { sun4v_patch_tlb_handlers(); + sun4v_register_fault_status(); + } /* Find available physical memory... */ read_obp_memory("available", &pavail[0], &pavail_ents); @@ -1112,9 +1136,6 @@ void __init paging_init(void) pfn_base = phys_base >> PAGE_SHIFT; - kern_base = (prom_boot_mapping_phys_low >> 22UL) << 22UL; - kern_size = (unsigned long)&_end - (unsigned long)KERNBASE; - set_bit(0, mmu_context_bmap); shift = kern_base + PAGE_OFFSET - ((unsigned long)KERNBASE); -- cgit v1.2.3-18-g5258 From 8b11bd12aff76e02cdc2cbc9e439bba88d281223 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 7 Feb 2006 22:13:05 -0800 Subject: [SPARC64]: Patch up mmu context register writes for sun4v. sun4v uses ASI_MMU instead of ASI_DMMU Signed-off-by: David S. Miller --- arch/sparc64/kernel/entry.S | 80 +++++++++++++++++++++++++++++++++++----- arch/sparc64/kernel/etrap.S | 8 +++- arch/sparc64/kernel/head.S | 33 +++++++++++++---- arch/sparc64/kernel/rtrap.S | 24 ++++++++++-- arch/sparc64/kernel/setup.c | 30 ++++++++------- arch/sparc64/kernel/trampoline.S | 32 ++++++++++++---- arch/sparc64/mm/init.c | 9 ----- arch/sparc64/prom/p1275.c | 11 ------ 8 files changed, 166 insertions(+), 61 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S index 4ca3ea0beaf..f51b66a1687 100644 --- a/arch/sparc64/kernel/entry.S +++ b/arch/sparc64/kernel/entry.S @@ -97,10 +97,22 @@ do_fpdis: add %g6, TI_FPREGS + 0x80, %g1 faddd %f0, %f2, %f4 fmuld %f0, %f2, %f6 - ldxa [%g3] ASI_DMMU, %g5 + +661: ldxa [%g3] ASI_DMMU, %g5 + .section .sun4v_1insn_patch, "ax" + .word 661b + ldxa [%g3] ASI_MMU, %g5 + .previous + sethi %hi(sparc64_kern_sec_context), %g2 ldx [%g2 + %lo(sparc64_kern_sec_context)], %g2 - stxa %g2, [%g3] ASI_DMMU + +661: stxa %g2, [%g3] ASI_DMMU + .section .sun4v_1insn_patch, "ax" + .word 661b + stxa %g2, [%g3] ASI_MMU + .previous + membar #Sync add %g6, TI_FPREGS + 0xc0, %g2 faddd %f0, %f2, %f8 @@ -126,11 +138,23 @@ do_fpdis: fzero %f32 mov SECONDARY_CONTEXT, %g3 fzero %f34 - ldxa [%g3] ASI_DMMU, %g5 + +661: ldxa [%g3] ASI_DMMU, %g5 + .section .sun4v_1insn_patch, "ax" + .word 661b + ldxa [%g3] ASI_MMU, %g5 + .previous + add %g6, TI_FPREGS, %g1 sethi %hi(sparc64_kern_sec_context), %g2 ldx [%g2 + %lo(sparc64_kern_sec_context)], %g2 - stxa %g2, [%g3] ASI_DMMU + +661: stxa %g2, [%g3] ASI_DMMU + .section .sun4v_1insn_patch, "ax" + .word 661b + stxa %g2, [%g3] ASI_MMU + .previous + membar #Sync add %g6, TI_FPREGS + 0x40, %g2 faddd %f32, %f34, %f36 @@ -155,10 +179,22 @@ do_fpdis: nop 3: mov SECONDARY_CONTEXT, %g3 add %g6, TI_FPREGS, %g1 - ldxa [%g3] ASI_DMMU, %g5 + +661: ldxa [%g3] ASI_DMMU, %g5 + .section .sun4v_1insn_patch, "ax" + .word 661b + ldxa [%g3] ASI_MMU, %g5 + .previous + sethi %hi(sparc64_kern_sec_context), %g2 ldx [%g2 + %lo(sparc64_kern_sec_context)], %g2 - stxa %g2, [%g3] ASI_DMMU + +661: stxa %g2, [%g3] ASI_DMMU + .section .sun4v_1insn_patch, "ax" + .word 661b + stxa %g2, [%g3] ASI_MMU + .previous + membar #Sync mov 0x40, %g2 membar #Sync @@ -169,7 +205,13 @@ do_fpdis: ldda [%g1 + %g2] ASI_BLK_S, %f48 membar #Sync fpdis_exit: - stxa %g5, [%g3] ASI_DMMU + +661: stxa %g5, [%g3] ASI_DMMU + .section .sun4v_1insn_patch, "ax" + .word 661b + stxa %g5, [%g3] ASI_MMU + .previous + membar #Sync fpdis_exit2: wr %g7, 0, %gsr @@ -323,10 +365,22 @@ do_fptrap_after_fsr: rd %gsr, %g3 stx %g3, [%g6 + TI_GSR] mov SECONDARY_CONTEXT, %g3 - ldxa [%g3] ASI_DMMU, %g5 + +661: ldxa [%g3] ASI_DMMU, %g5 + .section .sun4v_1insn_patch, "ax" + .word 661b + ldxa [%g3] ASI_MMU, %g5 + .previous + sethi %hi(sparc64_kern_sec_context), %g2 ldx [%g2 + %lo(sparc64_kern_sec_context)], %g2 - stxa %g2, [%g3] ASI_DMMU + +661: stxa %g2, [%g3] ASI_DMMU + .section .sun4v_1insn_patch, "ax" + .word 661b + stxa %g2, [%g3] ASI_MMU + .previous + membar #Sync add %g6, TI_FPREGS, %g2 andcc %g1, FPRS_DL, %g0 @@ -341,7 +395,13 @@ do_fptrap_after_fsr: stda %f48, [%g2 + %g3] ASI_BLK_S 5: mov SECONDARY_CONTEXT, %g1 membar #Sync - stxa %g5, [%g1] ASI_DMMU + +661: stxa %g5, [%g1] ASI_DMMU + .section .sun4v_1insn_patch, "ax" + .word 661b + stxa %g5, [%g1] ASI_MMU + .previous + membar #Sync ba,pt %xcc, etrap wr %g0, 0, %fprs diff --git a/arch/sparc64/kernel/etrap.S b/arch/sparc64/kernel/etrap.S index d8c062a1700..a0e7d480e5d 100644 --- a/arch/sparc64/kernel/etrap.S +++ b/arch/sparc64/kernel/etrap.S @@ -95,7 +95,13 @@ etrap_save: save %g2, -STACK_BIAS, %sp wrpr %g2, 0, %wstate sethi %hi(sparc64_kern_pri_context), %g2 ldx [%g2 + %lo(sparc64_kern_pri_context)], %g3 - stxa %g3, [%l4] ASI_DMMU + +661: stxa %g3, [%l4] ASI_DMMU + .section .sun4v_1insn_patch, "ax" + .word 661b + stxa %g3, [%l4] ASI_MMU + .previous + sethi %hi(KERNBASE), %l4 flush %l4 mov ASI_AIUS, %l7 diff --git a/arch/sparc64/kernel/head.S b/arch/sparc64/kernel/head.S index f04f7391f23..a304845f8c5 100644 --- a/arch/sparc64/kernel/head.S +++ b/arch/sparc64/kernel/head.S @@ -303,12 +303,24 @@ jump_to_sun4u_init: sun4u_init: /* Set ctx 0 */ - mov PRIMARY_CONTEXT, %g7 - stxa %g0, [%g7] ASI_DMMU - membar #Sync + mov PRIMARY_CONTEXT, %g7 + +661: stxa %g0, [%g7] ASI_DMMU + .section .sun4v_1insn_patch, "ax" + .word 661b + stxa %g0, [%g7] ASI_MMU + .previous + + membar #Sync + + mov SECONDARY_CONTEXT, %g7 + +661: stxa %g0, [%g7] ASI_DMMU + .section .sun4v_1insn_patch, "ax" + .word 661b + stxa %g0, [%g7] ASI_MMU + .previous - mov SECONDARY_CONTEXT, %g7 - stxa %g0, [%g7] ASI_DMMU membar #Sync BRANCH_IF_ANY_CHEETAH(g1,g7,cheetah_tlb_fixup) @@ -436,8 +448,15 @@ setup_trap_table: /* Start using proper page size encodings in ctx register. */ sethi %hi(sparc64_kern_pri_context), %g3 ldx [%g3 + %lo(sparc64_kern_pri_context)], %g2 - mov PRIMARY_CONTEXT, %g1 - stxa %g2, [%g1] ASI_DMMU + + mov PRIMARY_CONTEXT, %g1 + +661: stxa %g2, [%g1] ASI_DMMU + .section .sun4v_1insn_patch, "ax" + .word 661b + stxa %g2, [%g1] ASI_MMU + .previous + membar #Sync /* Kill PROM timer */ diff --git a/arch/sparc64/kernel/rtrap.S b/arch/sparc64/kernel/rtrap.S index a55d517e76a..551f7198200 100644 --- a/arch/sparc64/kernel/rtrap.S +++ b/arch/sparc64/kernel/rtrap.S @@ -264,11 +264,23 @@ rt_continue: ldx [%sp + PTREGS_OFF + PT_V9_G1], %g1 brnz,pn %l3, kern_rtt mov PRIMARY_CONTEXT, %l7 - ldxa [%l7 + %l7] ASI_DMMU, %l0 + +661: ldxa [%l7 + %l7] ASI_DMMU, %l0 + .section .sun4v_1insn_patch, "ax" + .word 661b + ldxa [%l7 + %l7] ASI_MMU, %l0 + .previous + sethi %hi(sparc64_kern_pri_nuc_bits), %l1 ldx [%l1 + %lo(sparc64_kern_pri_nuc_bits)], %l1 or %l0, %l1, %l0 - stxa %l0, [%l7] ASI_DMMU + +661: stxa %l0, [%l7] ASI_DMMU + .section .sun4v_1insn_patch, "ax" + .word 661b + stxa %l0, [%l7] ASI_MMU + .previous + sethi %hi(KERNBASE), %l7 flush %l7 rdpr %wstate, %l1 @@ -303,7 +315,13 @@ user_rtt_fill_fixup: sethi %hi(sparc64_kern_pri_context), %g2 ldx [%g2 + %lo(sparc64_kern_pri_context)], %g2 mov PRIMARY_CONTEXT, %g1 - stxa %g2, [%g1] ASI_DMMU + +661: stxa %g2, [%g1] ASI_DMMU + .section .sun4v_1insn_patch, "ax" + .word 661b + stxa %g2, [%g1] ASI_MMU + .previous + sethi %hi(KERNBASE), %g1 flush %g1 diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index 6d6178efd58..2d64320d3a4 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -189,26 +189,30 @@ int prom_callback(long *args) } if ((va >= KERNBASE) && (va < (KERNBASE + (4 * 1024 * 1024)))) { - extern unsigned long sparc64_kern_pri_context; - - /* Spitfire Errata #32 workaround */ - __asm__ __volatile__("stxa %0, [%1] %2\n\t" - "flush %%g6" - : /* No outputs */ - : "r" (sparc64_kern_pri_context), - "r" (PRIMARY_CONTEXT), - "i" (ASI_DMMU)); + if (tlb_type == spitfire) { + extern unsigned long sparc64_kern_pri_context; + + /* Spitfire Errata #32 workaround */ + __asm__ __volatile__( + "stxa %0, [%1] %2\n\t" + "flush %%g6" + : /* No outputs */ + : "r" (sparc64_kern_pri_context), + "r" (PRIMARY_CONTEXT), + "i" (ASI_DMMU)); + } /* * Locked down tlb entry. */ - if (tlb_type == spitfire) + if (tlb_type == spitfire) { tte = spitfire_get_dtlb_data(SPITFIRE_HIGHEST_LOCKED_TLBENT); - else if (tlb_type == cheetah || tlb_type == cheetah_plus) + res = PROM_TRUE; + } else if (tlb_type == cheetah || tlb_type == cheetah_plus) { tte = cheetah_get_ldtlb_data(CHEETAH_HIGHEST_LOCKED_TLBENT); - - res = PROM_TRUE; + res = PROM_TRUE; + } goto done; } diff --git a/arch/sparc64/kernel/trampoline.S b/arch/sparc64/kernel/trampoline.S index 18c333f841e..d9e2af35158 100644 --- a/arch/sparc64/kernel/trampoline.S +++ b/arch/sparc64/kernel/trampoline.S @@ -272,10 +272,22 @@ do_unlock: wr %g0, ASI_P, %asi mov PRIMARY_CONTEXT, %g7 - stxa %g0, [%g7] ASI_DMMU + +661: stxa %g0, [%g7] ASI_DMMU + .section .sun4v_1insn_patch, "ax" + .word 661b + stxa %g0, [%g7] ASI_MMU + .previous + membar #Sync mov SECONDARY_CONTEXT, %g7 - stxa %g0, [%g7] ASI_DMMU + +661: stxa %g0, [%g7] ASI_DMMU + .section .sun4v_1insn_patch, "ax" + .word 661b + stxa %g0, [%g7] ASI_MMU + .previous + membar #Sync mov 1, %g5 @@ -301,11 +313,17 @@ do_unlock: nop /* Start using proper page size encodings in ctx register. */ - sethi %hi(sparc64_kern_pri_context), %g3 - ldx [%g3 + %lo(sparc64_kern_pri_context)], %g2 - mov PRIMARY_CONTEXT, %g1 - stxa %g2, [%g1] ASI_DMMU - membar #Sync + sethi %hi(sparc64_kern_pri_context), %g3 + ldx [%g3 + %lo(sparc64_kern_pri_context)], %g2 + mov PRIMARY_CONTEXT, %g1 + +661: stxa %g2, [%g1] ASI_DMMU + .section .sun4v_1insn_patch, "ax" + .word 661b + stxa %g2, [%g1] ASI_MMU + .previous + + membar #Sync rdpr %pstate, %o1 or %o1, PSTATE_IE, %o1 diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 4c95cf34075..6504d6eb537 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -792,15 +792,6 @@ void sparc_ultra_dump_dtlb(void) } } -static inline void spitfire_errata32(void) -{ - __asm__ __volatile__("stxa %0, [%1] %2\n\t" - "flush %%g6" - : /* No outputs */ - : "r" (0), - "r" (PRIMARY_CONTEXT), "i" (ASI_DMMU)); -} - extern unsigned long cmdline_memory_size; unsigned long __init bootmem_init(unsigned long *pages_avail) diff --git a/arch/sparc64/prom/p1275.c b/arch/sparc64/prom/p1275.c index a5a7c571202..2b32c489860 100644 --- a/arch/sparc64/prom/p1275.c +++ b/arch/sparc64/prom/p1275.c @@ -30,16 +30,6 @@ extern void prom_world(int); extern void prom_cif_interface(void); extern void prom_cif_callback(void); -static inline unsigned long spitfire_get_primary_context(void) -{ - unsigned long ctx; - - __asm__ __volatile__("ldxa [%1] %2, %0" - : "=r" (ctx) - : "r" (PRIMARY_CONTEXT), "i" (ASI_DMMU)); - return ctx; -} - /* * This provides SMP safety on the p1275buf. prom_callback() drops this lock * to allow recursuve acquisition. @@ -55,7 +45,6 @@ long p1275_cmd(const char *service, long fmt, ...) long attrs, x; p = p1275buf.prom_buffer; - BUG_ON((spitfire_get_primary_context() & CTX_NR_MASK) != 0); spin_lock_irqsave(&prom_entry_lock, flags); -- cgit v1.2.3-18-g5258 From e088ad7ca3d09c96e63f1ce411a2ccba2688bf25 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 7 Feb 2006 23:51:49 -0800 Subject: [SPARC64]: Verify all trap_per_cpu assembler offsets in trap_init() Signed-off-by: David S. Miller --- arch/sparc64/kernel/traps.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c index 1c4744c047a..8f3fce24359 100644 --- a/arch/sparc64/kernel/traps.c +++ b/arch/sparc64/kernel/traps.c @@ -2182,7 +2182,18 @@ void __init trap_init(void) thread_info_offsets_are_bolixed_dave(); if (TRAP_PER_CPU_THREAD != offsetof(struct trap_per_cpu, thread) || - TRAP_PER_CPU_PGD_PADDR != offsetof(struct trap_per_cpu, pgd_paddr)) + (TRAP_PER_CPU_PGD_PADDR != + offsetof(struct trap_per_cpu, pgd_paddr)) || + (TRAP_PER_CPU_CPU_MONDO_PA != + offsetof(struct trap_per_cpu, cpu_mondo_pa)) || + (TRAP_PER_CPU_DEV_MONDO_PA != + offsetof(struct trap_per_cpu, dev_mondo_pa)) || + (TRAP_PER_CPU_RESUM_MONDO_PA != + offsetof(struct trap_per_cpu, resum_mondo_pa)) || + (TRAP_PER_CPU_NONRESUM_MONDO_PA != + offsetof(struct trap_per_cpu, nonresum_mondo_pa)) || + (TRAP_PER_CPU_FAULT_INFO != + offsetof(struct trap_per_cpu, fault_info))) trap_per_cpu_offsets_are_bolixed_dave(); /* Attach to the address space of init_task. On SMP we -- cgit v1.2.3-18-g5258 From ac29c11d4cd4fa1fac968e99998a956405732f2f Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 8 Feb 2006 00:08:23 -0800 Subject: [SPARC64]: Allocate and register the 4 sun4v mondo queues at bootup. Needs to occur before we enable PSTATE_IE in %pstate. Signed-off-by: David S. Miller --- arch/sparc64/kernel/irq.c | 48 ++++++++++++++++++++++++++++++++++++++++ arch/sparc64/kernel/trampoline.S | 12 +++++++++- 2 files changed, 59 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index d069a6feb53..3c1a2139f1b 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -855,6 +855,51 @@ void init_irqwork_curcpu(void) memset(__irq_work + cpu, 0, sizeof(struct irq_work_struct)); } +static void __cpuinit init_one_mondo(unsigned long *pa_ptr, unsigned long type) +{ + register unsigned long func __asm__("%o0"); + register unsigned long arg0 __asm__("%o1"); + register unsigned long arg1 __asm__("%o2"); + register unsigned long arg2 __asm__("%o3"); + unsigned long page = get_zeroed_page(GFP_ATOMIC); + + if (!page) { + prom_printf("SUN4V: Error, cannot allocate mondo queue.\n"); + prom_halt(); + } + + *pa_ptr = __pa(page); + + func = HV_FAST_CPU_QCONF; + arg0 = type; + arg1 = *pa_ptr; + arg2 = 128; /* XXX Implied by Niagara queue offsets. XXX */ + __asm__ __volatile__("ta %8" + : "=&r" (func), "=&r" (arg0), + "=&r" (arg1), "=&r" (arg2) + : "0" (func), "1" (arg0), + "2" (arg1), "3" (arg2), + "i" (HV_FAST_TRAP)); + + if (func != HV_EOK) { + prom_printf("SUN4V: cpu_qconf(%lu) failed with error %lu\n", + type, func); + prom_halt(); + } +} + +/* Allocate and init the mondo queues for this cpu. */ +void __cpuinit sun4v_init_mondo_queues(void) +{ + int cpu = hard_smp_processor_id(); + struct trap_per_cpu *tb = &trap_block[cpu]; + + init_one_mondo(&tb->cpu_mondo_pa, HV_CPU_QUEUE_CPU_MONDO); + init_one_mondo(&tb->dev_mondo_pa, HV_CPU_QUEUE_DEVICE_MONDO); + init_one_mondo(&tb->resum_mondo_pa, HV_CPU_QUEUE_RES_ERROR); + init_one_mondo(&tb->nonresum_mondo_pa, HV_CPU_QUEUE_NONRES_ERROR); +} + /* Only invoked on boot processor. */ void __init init_IRQ(void) { @@ -862,6 +907,9 @@ void __init init_IRQ(void) kill_prom_timer(); memset(&ivector_table[0], 0, sizeof(ivector_table)); + if (tlb_type == hypervisor) + sun4v_init_mondo_queues(); + /* We need to clear any IRQ's pending in the soft interrupt * registers, a spurious one could be left around from the * PROM timer which we just disabled. diff --git a/arch/sparc64/kernel/trampoline.S b/arch/sparc64/kernel/trampoline.S index d9e2af35158..fbf844f84a4 100644 --- a/arch/sparc64/kernel/trampoline.S +++ b/arch/sparc64/kernel/trampoline.S @@ -309,7 +309,17 @@ do_unlock: call init_irqwork_curcpu nop - call init_cur_cpu_trap + + sethi %hi(tlb_type), %g3 + lduw [%g3 + %lo(tlb_type)], %g2 + cmp %g2, 3 + bne,pt %icc, 1f + nop + + call sun4v_init_mondo_queues + nop + +1: call init_cur_cpu_trap nop /* Start using proper page size encodings in ctx register. */ -- cgit v1.2.3-18-g5258 From 5b0c0572fcd6204675c5f7ddfa572b5017f817dd Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 8 Feb 2006 02:53:50 -0800 Subject: [SPARC64]: Sun4v interrupt handling. Sun4v has 4 interrupt queues: cpu, device, resumable errors, and non-resumable errors. A set of head/tail offset pointers help maintain a work queue in physical memory. The entries are 64-bytes in size. Each queue is allocated then registered with the hypervisor as we bring cpus up. The two error queues each get a kernel side buffer that we use to quickly empty the main interrupt queue before we call up to C code to log the event and possibly take evasive action. Signed-off-by: David S. Miller --- arch/sparc64/kernel/head.S | 3 +- arch/sparc64/kernel/irq.c | 16 +- arch/sparc64/kernel/sun4v_ivec.S | 349 +++++++++++++++++++++++++++++++++++++++ arch/sparc64/kernel/traps.c | 184 +++++++++++++++++++++ arch/sparc64/kernel/ttable.S | 5 +- 5 files changed, 554 insertions(+), 3 deletions(-) create mode 100644 arch/sparc64/kernel/sun4v_ivec.S (limited to 'arch') diff --git a/arch/sparc64/kernel/head.S b/arch/sparc64/kernel/head.S index a304845f8c5..01980014aea 100644 --- a/arch/sparc64/kernel/head.S +++ b/arch/sparc64/kernel/head.S @@ -511,13 +511,14 @@ setup_tba: sparc64_boot_end: #include "systbls.S" -#include "sun4v_tlb_miss.S" #include "ktlb.S" #include "tsb.S" #include "etrap.S" #include "rtrap.S" #include "winfixup.S" #include "entry.S" +#include "sun4v_tlb_miss.S" +#include "sun4v_ivec.S" /* * The following skip makes sure the trap table in ttable.S is aligned diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index 3c1a2139f1b..ff201c007e0 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -888,7 +888,19 @@ static void __cpuinit init_one_mondo(unsigned long *pa_ptr, unsigned long type) } } -/* Allocate and init the mondo queues for this cpu. */ +static void __cpuinit init_one_kbuf(unsigned long *pa_ptr) +{ + unsigned long page = get_zeroed_page(GFP_ATOMIC); + + if (!page) { + prom_printf("SUN4V: Error, cannot allocate kbuf page.\n"); + prom_halt(); + } + + *pa_ptr = __pa(page); +} + +/* Allocate and init the mondo and error queues for this cpu. */ void __cpuinit sun4v_init_mondo_queues(void) { int cpu = hard_smp_processor_id(); @@ -897,7 +909,9 @@ void __cpuinit sun4v_init_mondo_queues(void) init_one_mondo(&tb->cpu_mondo_pa, HV_CPU_QUEUE_CPU_MONDO); init_one_mondo(&tb->dev_mondo_pa, HV_CPU_QUEUE_DEVICE_MONDO); init_one_mondo(&tb->resum_mondo_pa, HV_CPU_QUEUE_RES_ERROR); + init_one_kbuf(&tb->resum_kernel_buf_pa); init_one_mondo(&tb->nonresum_mondo_pa, HV_CPU_QUEUE_NONRES_ERROR); + init_one_kbuf(&tb->nonresum_kernel_buf_pa); } /* Only invoked on boot processor. */ diff --git a/arch/sparc64/kernel/sun4v_ivec.S b/arch/sparc64/kernel/sun4v_ivec.S new file mode 100644 index 00000000000..d9d442017d3 --- /dev/null +++ b/arch/sparc64/kernel/sun4v_ivec.S @@ -0,0 +1,349 @@ +/* sun4v_ivec.S: Sun4v interrupt vector handling. + * + * Copyright (C) 2006 + */ + +#include +#include + + .text + .align 32 + +sun4v_cpu_mondo: + /* Head offset in %g2, tail offset in %g4. + * If they are the same, no work. + */ + mov INTRQ_CPU_MONDO_HEAD, %g2 + ldxa [%g2] ASI_QUEUE, %g2 + mov INTRQ_CPU_MONDO_TAIL, %g4 + ldxa [%g4] ASI_QUEUE, %g4 + cmp %g2, %g4 + be,pn %xcc, sun4v_cpu_mondo_queue_empty + nop + + /* Get &trap_block[smp_processor_id()] into %g3. */ + __GET_CPUID(%g1) + sethi %hi(trap_block), %g3 + sllx %g1, TRAP_BLOCK_SZ_SHIFT, %g7 + or %g3, %lo(trap_block), %g3 + add %g3, %g7, %g3 + + /* Get CPU mondo queue base phys address into %g7. */ + ldx [%g3 + TRAP_PER_CPU_CPU_MONDO_PA], %g7 + + /* Now get the cross-call arguments and handler PC, same + * layout as sun4u: + * + * 1st 64-bit word: low half is 32-bit PC, put into %g3 and jmpl to it + * high half is context arg to MMU flushes, into %g5 + * 2nd 64-bit word: 64-bit arg, load into %g1 + * 3rd 64-bit word: 64-bit arg, load into %g7 + */ + ldxa [%g7 + %g2] ASI_PHYS_USE_EC, %g3 + add %g2, 0x8, %g2 + srlx %g3, 32, %g5 + ldxa [%g7 + %g2] ASI_PHYS_USE_EC, %g1 + add %g2, 0x8, %g2 + srl %g3, 0, %g3 + ldxa [%g7 + %g2] ASI_PHYS_USE_EC, %g7 + add %g2, 0x40 - 0x8 - 0x8, %g2 + + /* Update queue head pointer. */ + sethi %hi(8192 - 1), %g4 + or %g4, %lo(8192 - 1), %g4 + and %g2, %g4, %g2 + + mov INTRQ_CPU_MONDO_HEAD, %g4 + stxa %g2, [%g4] ASI_QUEUE + membar #Sync + + jmpl %g3, %g0 + nop + +sun4v_cpu_mondo_queue_empty: + retry + +sun4v_dev_mondo: + /* Head offset in %g2, tail offset in %g4. */ + mov INTRQ_DEVICE_MONDO_HEAD, %g2 + ldxa [%g2] ASI_QUEUE, %g2 + mov INTRQ_DEVICE_MONDO_TAIL, %g4 + ldxa [%g4] ASI_QUEUE, %g4 + cmp %g2, %g4 + be,pn %xcc, sun4v_dev_mondo_queue_empty + nop + + /* Get &trap_block[smp_processor_id()] into %g3. */ + __GET_CPUID(%g1) + sethi %hi(trap_block), %g3 + sllx %g1, TRAP_BLOCK_SZ_SHIFT, %g7 + or %g3, %lo(trap_block), %g3 + add %g3, %g7, %g3 + + /* Get DEV mondo queue base phys address into %g5. */ + ldx [%g3 + TRAP_PER_CPU_DEV_MONDO_PA], %g5 + + /* Load IVEC into %g3. */ + ldxa [%g5 + %g2] ASI_PHYS_USE_EC, %g3 + add %g2, 0x40, %g2 + + /* XXX There can be a full 64-byte block of data here. + * XXX This is how we can get at MSI vector data. + * XXX Current we do not capture this, but when we do we'll + * XXX need to add a 64-byte storage area in the struct ino_bucket + * XXX or the struct irq_desc. + */ + + /* Update queue head pointer, this frees up some registers. */ + sethi %hi(8192 - 1), %g4 + or %g4, %lo(8192 - 1), %g4 + and %g2, %g4, %g2 + + mov INTRQ_DEVICE_MONDO_HEAD, %g4 + stxa %g2, [%g4] ASI_QUEUE + membar #Sync + + /* Get &__irq_work[smp_processor_id()] into %g1. */ + sethi %hi(__irq_work), %g4 + sllx %g1, 6, %g1 + or %g4, %lo(__irq_work), %g4 + add %g4, %g1, %g1 + + /* Get &ivector_table[IVEC] into %g4. */ + sethi %hi(ivector_table), %g4 + sllx %g3, 5, %g3 + or %g4, %lo(ivector_table), %g4 + add %g4, %g3, %g4 + + /* Load IRQ %pil into %g5. */ + ldub [%g4 + 0x04], %g5 + + /* Insert ivector_table[] entry into __irq_work[] queue. */ + sllx %g5, 2, %g3 + lduw [%g1 + %g3], %g2 /* g2 = irq_work(cpu, pil) */ + stw %g2, [%g4 + 0x00] /* bucket->irq_chain = g2 */ + stw %g4, [%g1 + %g3] /* irq_work(cpu, pil) = bucket */ + + /* Signal the interrupt by setting (1 << pil) in %softint. */ + mov 1, %g2 + sllx %g2, %g5, %g2 + wr %g2, 0x0, %set_softint + +sun4v_dev_mondo_queue_empty: + retry + +sun4v_res_mondo: + /* Head offset in %g2, tail offset in %g4. */ + mov INTRQ_RESUM_MONDO_HEAD, %g2 + ldxa [%g2] ASI_QUEUE, %g2 + mov INTRQ_RESUM_MONDO_TAIL, %g4 + ldxa [%g4] ASI_QUEUE, %g4 + cmp %g2, %g4 + be,pn %xcc, sun4v_res_mondo_queue_empty + nop + + /* Get &trap_block[smp_processor_id()] into %g3. */ + __GET_CPUID(%g1) + sethi %hi(trap_block), %g3 + sllx %g1, TRAP_BLOCK_SZ_SHIFT, %g7 + or %g3, %lo(trap_block), %g3 + add %g3, %g7, %g3 + + /* Get RES mondo queue base phys address into %g5. */ + ldx [%g3 + TRAP_PER_CPU_RESUM_MONDO_PA], %g5 + + /* Get RES kernel buffer base phys address into %g7. */ + ldx [%g3 + TRAP_PER_CPU_RESUM_KBUF_PA], %g7 + + /* If the first word is non-zero, queue is full. */ + ldxa [%g7 + %g2] ASI_PHYS_USE_EC, %g1 + brnz,pn %g1, sun4v_res_mondo_queue_full + nop + + /* Remember this entry's offset in %g1. */ + mov %g2, %g1 + + /* Copy 64-byte queue entry into kernel buffer. */ + ldxa [%g5 + %g2] ASI_PHYS_USE_EC, %g3 + stxa %g3, [%g7 + %g2] ASI_PHYS_USE_EC + add %g2, 0x08, %g2 + ldxa [%g5 + %g2] ASI_PHYS_USE_EC, %g3 + stxa %g3, [%g7 + %g2] ASI_PHYS_USE_EC + add %g2, 0x08, %g2 + ldxa [%g5 + %g2] ASI_PHYS_USE_EC, %g3 + stxa %g3, [%g7 + %g2] ASI_PHYS_USE_EC + add %g2, 0x08, %g2 + ldxa [%g5 + %g2] ASI_PHYS_USE_EC, %g3 + stxa %g3, [%g7 + %g2] ASI_PHYS_USE_EC + add %g2, 0x08, %g2 + ldxa [%g5 + %g2] ASI_PHYS_USE_EC, %g3 + stxa %g3, [%g7 + %g2] ASI_PHYS_USE_EC + add %g2, 0x08, %g2 + ldxa [%g5 + %g2] ASI_PHYS_USE_EC, %g3 + stxa %g3, [%g7 + %g2] ASI_PHYS_USE_EC + add %g2, 0x08, %g2 + ldxa [%g5 + %g2] ASI_PHYS_USE_EC, %g3 + stxa %g3, [%g7 + %g2] ASI_PHYS_USE_EC + add %g2, 0x08, %g2 + ldxa [%g5 + %g2] ASI_PHYS_USE_EC, %g3 + stxa %g3, [%g7 + %g2] ASI_PHYS_USE_EC + add %g2, 0x08, %g2 + + /* Update queue head pointer. */ + sethi %hi(8192 - 1), %g4 + or %g4, %lo(8192 - 1), %g4 + and %g2, %g4, %g2 + + mov INTRQ_RESUM_MONDO_HEAD, %g4 + stxa %g2, [%g4] ASI_QUEUE + membar #Sync + + /* Disable interrupts and save register state so we can call + * C code. The etrap handling will leave %g4 in %l4 for us + * when it's done. + */ + rdpr %pil, %g2 + wrpr %g0, 15, %pil + mov %g1, %g4 + ba,pt %xcc, etrap_irq + rd %pc, %g7 + + /* Log the event. */ + add %sp, PTREGS_OFF, %o0 + call sun4v_resum_error + mov %l4, %o1 + + /* Return from trap. */ + ba,pt %xcc, rtrap_irq + nop + +sun4v_res_mondo_queue_empty: + retry + +sun4v_res_mondo_queue_full: + /* The queue is full, consolidate our damage by setting + * the head equal to the tail. We'll just trap again otherwise. + * Call C code to log the event. + */ + mov INTRQ_RESUM_MONDO_HEAD, %g2 + stxa %g4, [%g2] ASI_QUEUE + membar #Sync + + rdpr %pil, %g2 + wrpr %g0, 15, %pil + ba,pt %xcc, etrap_irq + rd %pc, %g7 + + call sun4v_resum_overflow + add %sp, PTREGS_OFF, %o0 + + ba,pt %xcc, rtrap_irq + nop + +sun4v_nonres_mondo: + /* Head offset in %g2, tail offset in %g4. */ + mov INTRQ_NONRESUM_MONDO_HEAD, %g2 + ldxa [%g2] ASI_QUEUE, %g2 + mov INTRQ_NONRESUM_MONDO_TAIL, %g4 + ldxa [%g4] ASI_QUEUE, %g4 + cmp %g2, %g4 + be,pn %xcc, sun4v_nonres_mondo_queue_empty + nop + + /* Get &trap_block[smp_processor_id()] into %g3. */ + __GET_CPUID(%g1) + sethi %hi(trap_block), %g3 + sllx %g1, TRAP_BLOCK_SZ_SHIFT, %g7 + or %g3, %lo(trap_block), %g3 + add %g3, %g7, %g3 + + /* Get RES mondo queue base phys address into %g5. */ + ldx [%g3 + TRAP_PER_CPU_NONRESUM_MONDO_PA], %g5 + + /* Get RES kernel buffer base phys address into %g7. */ + ldx [%g3 + TRAP_PER_CPU_NONRESUM_KBUF_PA], %g7 + + /* If the first word is non-zero, queue is full. */ + ldxa [%g7 + %g2] ASI_PHYS_USE_EC, %g1 + brnz,pn %g1, sun4v_nonres_mondo_queue_full + nop + + /* Remember this entry's offset in %g1. */ + mov %g2, %g1 + + /* Copy 64-byte queue entry into kernel buffer. */ + ldxa [%g5 + %g2] ASI_PHYS_USE_EC, %g3 + stxa %g3, [%g7 + %g2] ASI_PHYS_USE_EC + add %g2, 0x08, %g2 + ldxa [%g5 + %g2] ASI_PHYS_USE_EC, %g3 + stxa %g3, [%g7 + %g2] ASI_PHYS_USE_EC + add %g2, 0x08, %g2 + ldxa [%g5 + %g2] ASI_PHYS_USE_EC, %g3 + stxa %g3, [%g7 + %g2] ASI_PHYS_USE_EC + add %g2, 0x08, %g2 + ldxa [%g5 + %g2] ASI_PHYS_USE_EC, %g3 + stxa %g3, [%g7 + %g2] ASI_PHYS_USE_EC + add %g2, 0x08, %g2 + ldxa [%g5 + %g2] ASI_PHYS_USE_EC, %g3 + stxa %g3, [%g7 + %g2] ASI_PHYS_USE_EC + add %g2, 0x08, %g2 + ldxa [%g5 + %g2] ASI_PHYS_USE_EC, %g3 + stxa %g3, [%g7 + %g2] ASI_PHYS_USE_EC + add %g2, 0x08, %g2 + ldxa [%g5 + %g2] ASI_PHYS_USE_EC, %g3 + stxa %g3, [%g7 + %g2] ASI_PHYS_USE_EC + add %g2, 0x08, %g2 + ldxa [%g5 + %g2] ASI_PHYS_USE_EC, %g3 + stxa %g3, [%g7 + %g2] ASI_PHYS_USE_EC + add %g2, 0x08, %g2 + + /* Update queue head pointer. */ + sethi %hi(8192 - 1), %g4 + or %g4, %lo(8192 - 1), %g4 + and %g2, %g4, %g2 + + mov INTRQ_NONRESUM_MONDO_HEAD, %g4 + stxa %g2, [%g4] ASI_QUEUE + membar #Sync + + /* Disable interrupts and save register state so we can call + * C code. The etrap handling will leave %g4 in %l4 for us + * when it's done. + */ + rdpr %pil, %g2 + wrpr %g0, 15, %pil + mov %g1, %g4 + ba,pt %xcc, etrap_irq + rd %pc, %g7 + + /* Log the event. */ + add %sp, PTREGS_OFF, %o0 + call sun4v_nonresum_error + mov %l4, %o1 + + /* Return from trap. */ + ba,pt %xcc, rtrap_irq + nop + +sun4v_nonres_mondo_queue_empty: + retry + +sun4v_nonres_mondo_queue_full: + /* The queue is full, consolidate our damage by setting + * the head equal to the tail. We'll just trap again otherwise. + * Call C code to log the event. + */ + mov INTRQ_NONRESUM_MONDO_HEAD, %g2 + stxa %g4, [%g2] ASI_QUEUE + membar #Sync + + rdpr %pil, %g2 + wrpr %g0, 15, %pil + ba,pt %xcc, etrap_irq + rd %pc, %g7 + + call sun4v_nonresum_overflow + add %sp, PTREGS_OFF, %o0 + + ba,pt %xcc, rtrap_irq + nop diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c index 8f3fce24359..5417ff1b934 100644 --- a/arch/sparc64/kernel/traps.c +++ b/arch/sparc64/kernel/traps.c @@ -1668,6 +1668,186 @@ void cheetah_plus_parity_error(int type, struct pt_regs *regs) regs->tpc); } +struct sun4v_error_entry { + u64 err_handle; + u64 err_stick; + + u32 err_type; +#define SUN4V_ERR_TYPE_UNDEFINED 0 +#define SUN4V_ERR_TYPE_UNCORRECTED_RES 1 +#define SUN4V_ERR_TYPE_PRECISE_NONRES 2 +#define SUN4V_ERR_TYPE_DEFERRED_NONRES 3 +#define SUN4V_ERR_TYPE_WARNING_RES 4 + + u32 err_attrs; +#define SUN4V_ERR_ATTRS_PROCESSOR 0x00000001 +#define SUN4V_ERR_ATTRS_MEMORY 0x00000002 +#define SUN4V_ERR_ATTRS_PIO 0x00000004 +#define SUN4V_ERR_ATTRS_INT_REGISTERS 0x00000008 +#define SUN4V_ERR_ATTRS_FPU_REGISTERS 0x00000010 +#define SUN4V_ERR_ATTRS_USER_MODE 0x01000000 +#define SUN4V_ERR_ATTRS_PRIV_MODE 0x02000000 +#define SUN4V_ERR_ATTRS_RES_QUEUE_FULL 0x80000000 + + u64 err_raddr; + u32 err_size; + u16 err_cpu; + u16 err_pad; +}; + +static atomic_t sun4v_resum_oflow_cnt = ATOMIC_INIT(0); +static atomic_t sun4v_nonresum_oflow_cnt = ATOMIC_INIT(0); + +static const char *sun4v_err_type_to_str(u32 type) +{ + switch (type) { + case SUN4V_ERR_TYPE_UNDEFINED: + return "undefined"; + case SUN4V_ERR_TYPE_UNCORRECTED_RES: + return "uncorrected resumable"; + case SUN4V_ERR_TYPE_PRECISE_NONRES: + return "precise nonresumable"; + case SUN4V_ERR_TYPE_DEFERRED_NONRES: + return "deferred nonresumable"; + case SUN4V_ERR_TYPE_WARNING_RES: + return "warning resumable"; + default: + return "unknown"; + }; +} + +static void sun4v_log_error(struct sun4v_error_entry *ent, int cpu, const char *pfx, atomic_t *ocnt) +{ + int cnt; + + printk("%s: Reporting on cpu %d\n", pfx, cpu); + printk("%s: err_handle[%lx] err_stick[%lx] err_type[%08x:%s]\n", + pfx, + ent->err_handle, ent->err_stick, + ent->err_type, + sun4v_err_type_to_str(ent->err_type)); + printk("%s: err_attrs[%08x:%s %s %s %s %s %s %s %s]\n", + pfx, + ent->err_attrs, + ((ent->err_attrs & SUN4V_ERR_ATTRS_PROCESSOR) ? + "processor" : ""), + ((ent->err_attrs & SUN4V_ERR_ATTRS_MEMORY) ? + "memory" : ""), + ((ent->err_attrs & SUN4V_ERR_ATTRS_PIO) ? + "pio" : ""), + ((ent->err_attrs & SUN4V_ERR_ATTRS_INT_REGISTERS) ? + "integer-regs" : ""), + ((ent->err_attrs & SUN4V_ERR_ATTRS_FPU_REGISTERS) ? + "fpu-regs" : ""), + ((ent->err_attrs & SUN4V_ERR_ATTRS_USER_MODE) ? + "user" : ""), + ((ent->err_attrs & SUN4V_ERR_ATTRS_PRIV_MODE) ? + "privileged" : ""), + ((ent->err_attrs & SUN4V_ERR_ATTRS_RES_QUEUE_FULL) ? + "queue-full" : "")); + printk("%s: err_raddr[%016lx] err_size[%u] err_cpu[%u]\n", + pfx, + ent->err_raddr, ent->err_size, ent->err_cpu); + + if ((cnt = atomic_read(ocnt)) != 0) { + atomic_set(ocnt, 0); + wmb(); + printk("%s: Queue overflowed %d times.\n", + pfx, cnt); + } +} + +/* We run with %pil set to 15 and PSTATE_IE enabled in %pstate. + * Log the event and clear the first word of the entry. + */ +void sun4v_resum_error(struct pt_regs *regs, unsigned long offset) +{ + struct sun4v_error_entry *ent, local_copy; + struct trap_per_cpu *tb; + unsigned long paddr; + int cpu; + + cpu = get_cpu(); + + tb = &trap_block[cpu]; + paddr = tb->resum_kernel_buf_pa + offset; + ent = __va(paddr); + + memcpy(&local_copy, ent, sizeof(struct sun4v_error_entry)); + + /* We have a local copy now, so release the entry. */ + ent->err_handle = 0; + wmb(); + + put_cpu(); + + sun4v_log_error(&local_copy, cpu, + KERN_ERR "RESUMABLE ERROR", + &sun4v_resum_oflow_cnt); +} + +/* If we try to printk() we'll probably make matters worse, by trying + * to retake locks this cpu already holds or causing more errors. So + * just bump a counter, and we'll report these counter bumps above. + */ +void sun4v_resum_overflow(struct pt_regs *regs) +{ + atomic_inc(&sun4v_resum_oflow_cnt); +} + +/* We run with %pil set to 15 and PSTATE_IE enabled in %pstate. + * Log the event, clear the first word of the entry, and die. + */ +void sun4v_nonresum_error(struct pt_regs *regs, unsigned long offset) +{ + struct sun4v_error_entry *ent, local_copy; + struct trap_per_cpu *tb; + unsigned long paddr; + int cpu; + + cpu = get_cpu(); + + tb = &trap_block[cpu]; + paddr = tb->nonresum_kernel_buf_pa + offset; + ent = __va(paddr); + + memcpy(&local_copy, ent, sizeof(struct sun4v_error_entry)); + + /* We have a local copy now, so release the entry. */ + ent->err_handle = 0; + wmb(); + + put_cpu(); + +#ifdef CONFIG_PCI + /* Check for the special PCI poke sequence. */ + if (pci_poke_in_progress && pci_poke_cpu == cpu) { + pci_poke_faulted = 1; + regs->tpc += 4; + regs->tnpc = regs->tpc + 4; + return; + } +#endif + + sun4v_log_error(&local_copy, cpu, + KERN_EMERG "NON-RESUMABLE ERROR", + &sun4v_nonresum_oflow_cnt); + + panic("Non-resumable error."); +} + +/* If we try to printk() we'll probably make matters worse, by trying + * to retake locks this cpu already holds or causing more errors. So + * just bump a counter, and we'll report these counter bumps above. + */ +void sun4v_nonresum_overflow(struct pt_regs *regs) +{ + /* XXX Actually even this can make not that much sense. Perhaps + * XXX we should just pull the plug and panic directly from here? + */ + atomic_inc(&sun4v_nonresum_oflow_cnt); +} + void do_fpe_common(struct pt_regs *regs) { if (regs->tstate & TSTATE_PRIV) { @@ -2190,8 +2370,12 @@ void __init trap_init(void) offsetof(struct trap_per_cpu, dev_mondo_pa)) || (TRAP_PER_CPU_RESUM_MONDO_PA != offsetof(struct trap_per_cpu, resum_mondo_pa)) || + (TRAP_PER_CPU_RESUM_KBUF_PA != + offsetof(struct trap_per_cpu, resum_kernel_buf_pa)) || (TRAP_PER_CPU_NONRESUM_MONDO_PA != offsetof(struct trap_per_cpu, nonresum_mondo_pa)) || + (TRAP_PER_CPU_NONRESUM_KBUF_PA != + offsetof(struct trap_per_cpu, nonresum_kernel_buf_pa)) || (TRAP_PER_CPU_FAULT_INFO != offsetof(struct trap_per_cpu, fault_info))) trap_per_cpu_offsets_are_bolixed_dave(); diff --git a/arch/sparc64/kernel/ttable.S b/arch/sparc64/kernel/ttable.S index 2679b6e253a..1608ba4bf1c 100644 --- a/arch/sparc64/kernel/ttable.S +++ b/arch/sparc64/kernel/ttable.S @@ -88,7 +88,10 @@ tl0_dcpe: BTRAP(0x71) /* D-cache Parity Error on Cheetah+ */ tl0_icpe: BTRAP(0x72) /* I-cache Parity Error on Cheetah+ */ tl0_resv073: BTRAP(0x73) BTRAP(0x74) BTRAP(0x75) tl0_resv076: BTRAP(0x76) BTRAP(0x77) BTRAP(0x78) BTRAP(0x79) BTRAP(0x7a) BTRAP(0x7b) -tl0_resv07c: BTRAP(0x7c) BTRAP(0x7d) BTRAP(0x7e) BTRAP(0x7f) +tl0_cpu_mondo: TRAP_NOSAVE(sun4v_cpu_mondo) +tl0_dev_mondo: TRAP_NOSAVE(sun4v_dev_mondo) +tl0_res_mondo: TRAP_NOSAVE(sun4v_res_mondo) +tl0_nres_mondo: TRAP_NOSAVE(sun4v_nonres_mondo) tl0_s0n: SPILL_0_NORMAL tl0_s1n: SPILL_1_NORMAL tl0_s2n: SPILL_2_NORMAL -- cgit v1.2.3-18-g5258 From 1d2f1f90a1e004b0c1b8a73ed4394a93f09104b3 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 8 Feb 2006 16:41:20 -0800 Subject: [SPARC64]: Sun4v cross-call sending support. Technically the hypervisor call supports sending in a list of all cpus to get the cross-call, but I only pass in one cpu at a time for now. The multi-cpu support is there, just ifdef'd out so it's easy to enable or delete it later. Signed-off-by: David S. Miller --- arch/sparc64/kernel/irq.c | 22 ++++++++ arch/sparc64/kernel/smp.c | 125 +++++++++++++++++++++++++++++++++++++++++++- arch/sparc64/kernel/traps.c | 6 ++- 3 files changed, 151 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index ff201c007e0..c80d2531ec4 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -900,6 +900,24 @@ static void __cpuinit init_one_kbuf(unsigned long *pa_ptr) *pa_ptr = __pa(page); } +static void __cpuinit init_cpu_send_mondo_info(struct trap_per_cpu *tb) +{ +#ifdef CONFIG_SMP + unsigned long page; + + BUILD_BUG_ON((NR_CPUS * sizeof(u16)) > (PAGE_SIZE - 64)); + + page = get_zeroed_page(GFP_ATOMIC); + if (!page) { + prom_printf("SUN4V: Error, cannot allocate cpu mondo page.\n"); + prom_halt(); + } + + tb->cpu_mondo_block_pa = __pa(page); + tb->cpu_list_pa = __pa(page + 64); +#endif +} + /* Allocate and init the mondo and error queues for this cpu. */ void __cpuinit sun4v_init_mondo_queues(void) { @@ -908,10 +926,14 @@ void __cpuinit sun4v_init_mondo_queues(void) init_one_mondo(&tb->cpu_mondo_pa, HV_CPU_QUEUE_CPU_MONDO); init_one_mondo(&tb->dev_mondo_pa, HV_CPU_QUEUE_DEVICE_MONDO); + init_one_mondo(&tb->resum_mondo_pa, HV_CPU_QUEUE_RES_ERROR); init_one_kbuf(&tb->resum_kernel_buf_pa); + init_one_mondo(&tb->nonresum_mondo_pa, HV_CPU_QUEUE_NONRES_ERROR); init_one_kbuf(&tb->nonresum_kernel_buf_pa); + + init_cpu_send_mondo_info(tb); } /* Only invoked on boot processor. */ diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 223cc6bd369..c10a3a8639e 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -531,10 +531,133 @@ retry: } } +#if 0 +/* Multi-cpu list version. */ +static int init_cpu_list(u16 *list, cpumask_t mask) +{ + int i, cnt; + + cnt = 0; + for_each_cpu_mask(i, mask) + list[cnt++] = i; + + return cnt; +} + +static int update_cpu_list(u16 *list, int orig_cnt, cpumask_t mask) +{ + int i; + + for (i = 0; i < orig_cnt; i++) { + if (list[i] == 0xffff) + cpu_clear(i, mask); + } + + return init_cpu_list(list, mask); +} + +static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mask) +{ + int this_cpu = get_cpu(); + struct trap_per_cpu *tb = &trap_block[this_cpu]; + u64 *mondo = __va(tb->cpu_mondo_block_pa); + u16 *cpu_list = __va(tb->cpu_list_pa); + int cnt, retries; + + mondo[0] = data0; + mondo[1] = data1; + mondo[2] = data2; + wmb(); + + retries = 0; + cnt = init_cpu_list(cpu_list, mask); + do { + register unsigned long func __asm__("%o0"); + register unsigned long arg0 __asm__("%o1"); + register unsigned long arg1 __asm__("%o2"); + register unsigned long arg2 __asm__("%o3"); + + func = HV_FAST_CPU_MONDO_SEND; + arg0 = cnt; + arg1 = tb->cpu_list_pa; + arg2 = tb->cpu_mondo_block_pa; + + __asm__ __volatile__("ta %8" + : "=&r" (func), "=&r" (arg0), + "=&r" (arg1), "=&r" (arg2) + : "0" (func), "1" (arg0), + "2" (arg1), "3" (arg2), + "i" (HV_FAST_TRAP) + : "memory"); + if (likely(func == HV_EOK)) + break; + + if (unlikely(++retries > 100)) { + printk("CPU[%d]: sun4v mondo error %lu\n", + this_cpu, func); + break; + } + + cnt = update_cpu_list(cpu_list, cnt, mask); + + udelay(2 * cnt); + } while (1); + + put_cpu(); +} +#else +/* Single-cpu list version. */ static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mask) { - /* XXX implement me */ + int this_cpu = get_cpu(); + struct trap_per_cpu *tb = &trap_block[this_cpu]; + u64 *mondo = __va(tb->cpu_mondo_block_pa); + u16 *cpu_list = __va(tb->cpu_list_pa); + int i; + + mondo[0] = data0; + mondo[1] = data1; + mondo[2] = data2; + wmb(); + + for_each_cpu_mask(i, mask) { + int retries = 0; + + do { + register unsigned long func __asm__("%o0"); + register unsigned long arg0 __asm__("%o1"); + register unsigned long arg1 __asm__("%o2"); + register unsigned long arg2 __asm__("%o3"); + + cpu_list[0] = i; + func = HV_FAST_CPU_MONDO_SEND; + arg0 = 1; + arg1 = tb->cpu_list_pa; + arg2 = tb->cpu_mondo_block_pa; + + __asm__ __volatile__("ta %8" + : "=&r" (func), "=&r" (arg0), + "=&r" (arg1), "=&r" (arg2) + : "0" (func), "1" (arg0), + "2" (arg1), "3" (arg2), + "i" (HV_FAST_TRAP) + : "memory"); + if (likely(func == HV_EOK)) + break; + + if (unlikely(++retries > 100)) { + printk("CPU[%d]: sun4v mondo error %lu\n", + this_cpu, func); + break; + } + + udelay(2 * i); + } while (1); + } + + put_cpu(); } +#endif /* Send cross call to all processors mentioned in MASK * except self. diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c index 5417ff1b934..ac171161e79 100644 --- a/arch/sparc64/kernel/traps.c +++ b/arch/sparc64/kernel/traps.c @@ -2377,7 +2377,11 @@ void __init trap_init(void) (TRAP_PER_CPU_NONRESUM_KBUF_PA != offsetof(struct trap_per_cpu, nonresum_kernel_buf_pa)) || (TRAP_PER_CPU_FAULT_INFO != - offsetof(struct trap_per_cpu, fault_info))) + offsetof(struct trap_per_cpu, fault_info)) || + (TRAP_PER_CPU_CPU_MONDO_BLOCK_PA != + offsetof(struct trap_per_cpu, cpu_mondo_block_pa)) || + (TRAP_PER_CPU_CPU_LIST_PA != + offsetof(struct trap_per_cpu, cpu_list_pa))) trap_per_cpu_offsets_are_bolixed_dave(); /* Attach to the address space of init_task. On SMP we -- cgit v1.2.3-18-g5258 From d82ace7dc4073b090a55b9740700e32b9a9ae302 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 9 Feb 2006 02:52:44 -0800 Subject: [SPARC64]: Detect sun4v early in boot process. We look for "SUNW,sun4v" in the 'compatible' property of the root OBP device tree node. Protect every %ver register access, to make sure it is not touched on sun4v, as %ver is hyperprivileged there. Lock kernel TLB entries using hypervisor calls instead of calls into OBP. Signed-off-by: David S. Miller --- arch/sparc64/kernel/cpu.c | 6 +++ arch/sparc64/kernel/head.S | 96 ++++++++++++++++++++++++++++++++++---- arch/sparc64/kernel/irq.c | 78 +++++++++++++++++-------------- arch/sparc64/kernel/setup.c | 9 ++-- arch/sparc64/kernel/trampoline.S | 62 +++++++++++++++++++++--- arch/sparc64/kernel/us2e_cpufreq.c | 3 ++ arch/sparc64/kernel/us3_cpufreq.c | 3 ++ arch/sparc64/mm/init.c | 58 ++++++++++++++++++----- arch/sparc64/prom/init.c | 20 ++++---- arch/sparc64/prom/tree.c | 9 ++-- 10 files changed, 264 insertions(+), 80 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/cpu.c b/arch/sparc64/kernel/cpu.c index 00eed88ef2e..c7a4fb39702 100644 --- a/arch/sparc64/kernel/cpu.c +++ b/arch/sparc64/kernel/cpu.c @@ -71,6 +71,12 @@ void __init cpu_probe(void) unsigned long ver, fpu_vers, manuf, impl, fprs; int i; + if (tlb_type == hypervisor) { + sparc_cpu_type = "UltraSparc T1 (Niagara)"; + sparc_fpu_type = "UltraSparc T1 integrated FPU"; + return; + } + fprs = fprs_read(); fprs_write(FPRS_FEF); __asm__ __volatile__ ("rdpr %%ver, %0; stx %%fsr, [%1]" diff --git a/arch/sparc64/kernel/head.S b/arch/sparc64/kernel/head.S index 01980014aea..d048f0dfd42 100644 --- a/arch/sparc64/kernel/head.S +++ b/arch/sparc64/kernel/head.S @@ -95,12 +95,17 @@ sparc64_boot: wrpr %g1, 0x0, %pstate ba,a,pt %xcc, 1f - .globl prom_finddev_name, prom_chosen_path - .globl prom_getprop_name, prom_mmu_name - .globl prom_callmethod_name, prom_translate_name + .globl prom_finddev_name, prom_chosen_path, prom_root_node + .globl prom_getprop_name, prom_mmu_name, prom_peer_name + .globl prom_callmethod_name, prom_translate_name, prom_root_compatible .globl prom_map_name, prom_unmap_name, prom_mmu_ihandle_cache .globl prom_boot_mapped_pc, prom_boot_mapping_mode .globl prom_boot_mapping_phys_high, prom_boot_mapping_phys_low + .globl is_sun4v +prom_peer_name: + .asciz "peer" +prom_compatible_name: + .asciz "compatible" prom_finddev_name: .asciz "finddevice" prom_chosen_path: @@ -117,7 +122,13 @@ prom_map_name: .asciz "map" prom_unmap_name: .asciz "unmap" +prom_sun4v_name: + .asciz "SUNW,sun4v" .align 4 +prom_root_compatible: + .skip 64 +prom_root_node: + .word 0 prom_mmu_ihandle_cache: .word 0 prom_boot_mapped_pc: @@ -129,8 +140,54 @@ prom_boot_mapping_phys_high: .xword 0 prom_boot_mapping_phys_low: .xword 0 +is_sun4v: + .word 0 1: rd %pc, %l0 + + mov (1b - prom_peer_name), %l1 + sub %l0, %l1, %l1 + mov 0, %l2 + + /* prom_root_node = prom_peer(0) */ + stx %l1, [%sp + 2047 + 128 + 0x00] ! service, "peer" + mov 1, %l3 + stx %l3, [%sp + 2047 + 128 + 0x08] ! num_args, 1 + stx %l3, [%sp + 2047 + 128 + 0x10] ! num_rets, 1 + stx %l2, [%sp + 2047 + 128 + 0x18] ! arg1, 0 + stx %g0, [%sp + 2047 + 128 + 0x20] ! ret1 + call %l7 + add %sp, (2047 + 128), %o0 ! argument array + + ldx [%sp + 2047 + 128 + 0x20], %l4 ! prom root node + mov (1b - prom_root_node), %l1 + sub %l0, %l1, %l1 + stw %l4, [%l1] + + mov (1b - prom_getprop_name), %l1 + mov (1b - prom_compatible_name), %l2 + mov (1b - prom_root_compatible), %l5 + sub %l0, %l1, %l1 + sub %l0, %l2, %l2 + sub %l0, %l5, %l5 + + /* prom_getproperty(prom_root_node, "compatible", + * &prom_root_compatible, 64) + */ + stx %l1, [%sp + 2047 + 128 + 0x00] ! service, "getprop" + mov 4, %l3 + stx %l3, [%sp + 2047 + 128 + 0x08] ! num_args, 4 + mov 1, %l3 + stx %l3, [%sp + 2047 + 128 + 0x10] ! num_rets, 1 + stx %l4, [%sp + 2047 + 128 + 0x18] ! arg1, prom_root_node + stx %l2, [%sp + 2047 + 128 + 0x20] ! arg2, "compatible" + stx %l5, [%sp + 2047 + 128 + 0x28] ! arg3, &prom_root_compatible + mov 64, %l3 + stx %l3, [%sp + 2047 + 128 + 0x30] ! arg4, size + stx %g0, [%sp + 2047 + 128 + 0x38] ! ret1 + call %l7 + add %sp, (2047 + 128), %o0 ! argument array + mov (1b - prom_finddev_name), %l1 mov (1b - prom_chosen_path), %l2 mov (1b - prom_boot_mapped_pc), %l3 @@ -239,6 +296,27 @@ prom_boot_mapping_phys_low: add %sp, (192 + 128), %sp sparc64_boot_after_remap: + sethi %hi(prom_root_compatible), %g1 + or %g1, %lo(prom_root_compatible), %g1 + sethi %hi(prom_sun4v_name), %g7 + or %g7, %lo(prom_sun4v_name), %g7 + mov 10, %g3 +1: ldub [%g7], %g2 + ldub [%g1], %g4 + cmp %g2, %g4 + bne,pn %icc, 2f + add %g7, 1, %g7 + subcc %g3, 1, %g3 + bne,pt %xcc, 1b + add %g1, 1, %g1 + + sethi %hi(is_sun4v), %g1 + or %g1, %lo(is_sun4v), %g1 + mov 1, %g7 + stw %g7, [%g1] + +2: + BRANCH_IF_SUN4V(g1, jump_to_sun4u_init) BRANCH_IF_CHEETAH_BASE(g1,g7,cheetah_boot) BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g1,g7,cheetah_plus_boot) ba,pt %xcc, spitfire_boot @@ -323,14 +401,12 @@ sun4u_init: membar #Sync - BRANCH_IF_ANY_CHEETAH(g1,g7,cheetah_tlb_fixup) + BRANCH_IF_SUN4V(g1, niagara_tlb_fixup) + BRANCH_IF_ANY_CHEETAH(g1, g7, cheetah_tlb_fixup) ba,pt %xcc, spitfire_tlb_fixup nop - /* XXX Nothing branches to here yet, when %ver register indicates - * XXX Niagara we should do this. - */ niagara_tlb_fixup: mov 3, %g2 /* Set TLB type to hypervisor. */ sethi %hi(tlb_type), %g1 @@ -346,6 +422,9 @@ niagara_tlb_fixup: call hypervisor_patch_cachetlbops nop + ba,pt %xcc, tlb_fixup_done + nop + cheetah_tlb_fixup: mov 2, %g2 /* Set TLB type to cheetah+. */ BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g1,g7,1f) @@ -464,7 +543,8 @@ setup_trap_table: sllx %o2, 32, %o2 wr %o2, 0, %tick_cmpr - BRANCH_IF_ANY_CHEETAH(o2,o3,1f) + BRANCH_IF_SUN4V(o2, 1f) + BRANCH_IF_ANY_CHEETAH(o2, o3, 1f) ba,pt %xcc, 2f nop diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index c80d2531ec4..1f6455503f2 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -150,47 +150,53 @@ void enable_irq(unsigned int irq) preempt_disable(); - if (tlb_type == cheetah || tlb_type == cheetah_plus) { - unsigned long ver; - - __asm__ ("rdpr %%ver, %0" : "=r" (ver)); - if ((ver >> 32) == __JALAPENO_ID || - (ver >> 32) == __SERRANO_ID) { - /* We set it to our JBUS ID. */ + if (tlb_type == hypervisor) { + /* XXX SUN4V: implement me... XXX */ + } else { + if (tlb_type == cheetah || tlb_type == cheetah_plus) { + unsigned long ver; + + __asm__ ("rdpr %%ver, %0" : "=r" (ver)); + if ((ver >> 32) == __JALAPENO_ID || + (ver >> 32) == __SERRANO_ID) { + /* We set it to our JBUS ID. */ + __asm__ __volatile__("ldxa [%%g0] %1, %0" + : "=r" (tid) + : "i" (ASI_JBUS_CONFIG)); + tid = ((tid & (0x1fUL<<17)) << 9); + tid &= IMAP_TID_JBUS; + } else { + /* We set it to our Safari AID. */ + __asm__ __volatile__("ldxa [%%g0] %1, %0" + : "=r" (tid) + : "i"(ASI_SAFARI_CONFIG)); + tid = ((tid & (0x3ffUL<<17)) << 9); + tid &= IMAP_AID_SAFARI; + } + } else if (this_is_starfire == 0) { + /* We set it to our UPA MID. */ __asm__ __volatile__("ldxa [%%g0] %1, %0" : "=r" (tid) - : "i" (ASI_JBUS_CONFIG)); - tid = ((tid & (0x1fUL<<17)) << 9); - tid &= IMAP_TID_JBUS; + : "i" (ASI_UPA_CONFIG)); + tid = ((tid & UPA_CONFIG_MID) << 9); + tid &= IMAP_TID_UPA; } else { - /* We set it to our Safari AID. */ - __asm__ __volatile__("ldxa [%%g0] %1, %0" - : "=r" (tid) - : "i" (ASI_SAFARI_CONFIG)); - tid = ((tid & (0x3ffUL<<17)) << 9); - tid &= IMAP_AID_SAFARI; + tid = (starfire_translate(imap, + smp_processor_id()) << 26); + tid &= IMAP_TID_UPA; } - } else if (this_is_starfire == 0) { - /* We set it to our UPA MID. */ - __asm__ __volatile__("ldxa [%%g0] %1, %0" - : "=r" (tid) - : "i" (ASI_UPA_CONFIG)); - tid = ((tid & UPA_CONFIG_MID) << 9); - tid &= IMAP_TID_UPA; - } else { - tid = (starfire_translate(imap, smp_processor_id()) << 26); - tid &= IMAP_TID_UPA; - } - /* NOTE NOTE NOTE, IGN and INO are read-only, IGN is a product - * of this SYSIO's preconfigured IGN in the SYSIO Control - * Register, the hardware just mirrors that value here. - * However for Graphics and UPA Slave devices the full - * IMAP_INR field can be set by the programmer here. - * - * Things like FFB can now be handled via the new IRQ mechanism. - */ - upa_writel(tid | IMAP_VALID, imap); + /* NOTE NOTE NOTE, IGN and INO are read-only, IGN is a product + * of this SYSIO's preconfigured IGN in the SYSIO Control + * Register, the hardware just mirrors that value here. + * However for Graphics and UPA Slave devices the full + * IMAP_INR field can be set by the programmer here. + * + * Things like FFB can now be handled via the new IRQ + * mechanism. + */ + upa_writel(tid | IMAP_VALID, imap); + } preempt_enable(); } diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index 2d64320d3a4..7f02c8f71df 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -504,9 +504,12 @@ static void __init per_cpu_patch(void) if (tlb_type == spitfire && !this_is_starfire) return; - __asm__ ("rdpr %%ver, %0" : "=r" (ver)); - is_jbus = ((ver >> 32) == __JALAPENO_ID || - (ver >> 32) == __SERRANO_ID); + is_jbus = 0; + if (tlb_type != hypervisor) { + __asm__ ("rdpr %%ver, %0" : "=r" (ver)); + is_jbus = ((ver >> 32) == __JALAPENO_ID || + (ver >> 32) == __SERRANO_ID); + } p = &__cpuid_patch; while (p < &__cpuid_patch_end) { diff --git a/arch/sparc64/kernel/trampoline.S b/arch/sparc64/kernel/trampoline.S index fbf844f84a4..ffa8b79632c 100644 --- a/arch/sparc64/kernel/trampoline.S +++ b/arch/sparc64/kernel/trampoline.S @@ -16,6 +16,7 @@ #include #include #include +#include .data .align 8 @@ -34,8 +35,9 @@ dtlb_load: sparc64_cpu_startup: flushw - BRANCH_IF_CHEETAH_BASE(g1,g5,cheetah_startup) - BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g1,g5,cheetah_plus_startup) + BRANCH_IF_SUN4V(g1, niagara_startup) + BRANCH_IF_CHEETAH_BASE(g1, g5, cheetah_startup) + BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g1, g5, cheetah_plus_startup) ba,pt %xcc, spitfire_startup nop @@ -70,7 +72,9 @@ cheetah_generic_startup: stxa %g0, [%g3] ASI_DMMU stxa %g0, [%g3] ASI_IMMU membar #Sync + /* fallthru */ +niagara_startup: /* Disable STICK_INT interrupts. */ sethi %hi(0x80000000), %g5 sllx %g5, 32, %g5 @@ -91,6 +95,8 @@ startup_continue: sllx %g2, 32, %g2 wr %g2, 0, %tick_cmpr + BRANCH_IF_SUN4V(g1, niagara_lock_tlb) + /* Call OBP by hand to lock KERNBASE into i/d tlbs. * We lock 2 consequetive entries if we are 'bigkernel'. */ @@ -142,8 +148,7 @@ startup_continue: sethi %hi(bigkernel), %g2 lduw [%g2 + %lo(bigkernel)], %g2 - cmp %g2, 0 - be,pt %icc, do_dtlb + brz,pt %g2, do_dtlb nop sethi %hi(call_method), %g2 @@ -214,8 +219,7 @@ do_dtlb: sethi %hi(bigkernel), %g2 lduw [%g2 + %lo(bigkernel)], %g2 - cmp %g2, 0 - be,pt %icc, do_unlock + brz,pt %g2, do_unlock nop sethi %hi(call_method), %g2 @@ -257,6 +261,52 @@ do_unlock: stb %g0, [%g2 + %lo(prom_entry_lock)] membar #StoreStore | #StoreLoad + ba,pt %xcc, after_lock_tlb + nop + +niagara_lock_tlb: + mov HV_FAST_MMU_MAP_PERM_ADDR, %o0 + sethi %hi(KERNBASE), %o1 + clr %o2 + sethi %hi(kern_locked_tte_data), %o3 + ldx [%o3 + %lo(kern_locked_tte_data)], %o3 + mov HV_MMU_IMMU, %o4 + ta HV_FAST_TRAP + + mov HV_FAST_MMU_MAP_PERM_ADDR, %o0 + sethi %hi(KERNBASE), %o1 + clr %o2 + sethi %hi(kern_locked_tte_data), %o3 + ldx [%o3 + %lo(kern_locked_tte_data)], %o3 + mov HV_MMU_DMMU, %o4 + ta HV_FAST_TRAP + + sethi %hi(bigkernel), %g2 + lduw [%g2 + %lo(bigkernel)], %g2 + brz,pt %g2, after_lock_tlb + nop + + mov HV_FAST_MMU_MAP_PERM_ADDR, %o0 + sethi %hi(KERNBASE + 0x400000), %o1 + clr %o2 + sethi %hi(kern_locked_tte_data), %o3 + ldx [%o3 + %lo(kern_locked_tte_data)], %o3 + sethi %hi(0x400000), %o4 + add %o3, %o4, %o3 + mov HV_MMU_IMMU, %o4 + ta HV_FAST_TRAP + + mov HV_FAST_MMU_MAP_PERM_ADDR, %o0 + sethi %hi(KERNBASE + 0x400000), %o1 + clr %o2 + sethi %hi(kern_locked_tte_data), %o3 + ldx [%o3 + %lo(kern_locked_tte_data)], %o3 + sethi %hi(0x400000), %o4 + add %o3, %o4, %o3 + mov HV_MMU_DMMU, %o4 + ta HV_FAST_TRAP + +after_lock_tlb: mov %l1, %sp flushw diff --git a/arch/sparc64/kernel/us2e_cpufreq.c b/arch/sparc64/kernel/us2e_cpufreq.c index b35dc8dc995..669fb83dd4f 100644 --- a/arch/sparc64/kernel/us2e_cpufreq.c +++ b/arch/sparc64/kernel/us2e_cpufreq.c @@ -346,6 +346,9 @@ static int __init us2e_freq_init(void) unsigned long manuf, impl, ver; int ret; + if (tlb_type != spitfire) + return -ENODEV; + __asm__("rdpr %%ver, %0" : "=r" (ver)); manuf = ((ver >> 48) & 0xffff); impl = ((ver >> 32) & 0xffff); diff --git a/arch/sparc64/kernel/us3_cpufreq.c b/arch/sparc64/kernel/us3_cpufreq.c index 6d1f9a3c464..a912c45bdc0 100644 --- a/arch/sparc64/kernel/us3_cpufreq.c +++ b/arch/sparc64/kernel/us3_cpufreq.c @@ -203,6 +203,9 @@ static int __init us3_freq_init(void) unsigned long manuf, impl, ver; int ret; + if (tlb_type != cheetah && tlb_type != cheetah_plus) + return -ENODEV; + __asm__("rdpr %%ver, %0" : "=r" (ver)); manuf = ((ver >> 48) & 0xffff); impl = ((ver >> 32) & 0xffff); diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 6504d6eb537..e602b857071 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -514,6 +514,29 @@ static void __init read_obp_translations(void) } } +static void __init hypervisor_tlb_lock(unsigned long vaddr, + unsigned long pte, + unsigned long mmu) +{ + register unsigned long func asm("%o0"); + register unsigned long arg0 asm("%o1"); + register unsigned long arg1 asm("%o2"); + register unsigned long arg2 asm("%o3"); + register unsigned long arg3 asm("%o4"); + + func = HV_FAST_MMU_MAP_PERM_ADDR; + arg0 = vaddr; + arg1 = 0; + arg2 = pte; + arg3 = mmu; + __asm__ __volatile__("ta 0x80" + : "=&r" (func), "=&r" (arg0), + "=&r" (arg1), "=&r" (arg2), + "=&r" (arg3) + : "0" (func), "1" (arg0), "2" (arg1), + "3" (arg2), "4" (arg3)); +} + static void __init remap_kernel(void) { unsigned long phys_page, tte_vaddr, tte_data; @@ -527,19 +550,30 @@ static void __init remap_kernel(void) kern_locked_tte_data = tte_data; - /* Now lock us into the TLBs via OBP. */ - prom_dtlb_load(tlb_ent, tte_data, tte_vaddr); - prom_itlb_load(tlb_ent, tte_data, tte_vaddr); - if (bigkernel) { - tlb_ent -= 1; - prom_dtlb_load(tlb_ent, - tte_data + 0x400000, - tte_vaddr + 0x400000); - prom_itlb_load(tlb_ent, - tte_data + 0x400000, - tte_vaddr + 0x400000); + /* Now lock us into the TLBs via Hypervisor or OBP. */ + if (tlb_type == hypervisor) { + hypervisor_tlb_lock(tte_vaddr, tte_data, HV_MMU_DMMU); + hypervisor_tlb_lock(tte_vaddr, tte_data, HV_MMU_IMMU); + if (bigkernel) { + tte_vaddr += 0x400000; + tte_data += 0x400000; + hypervisor_tlb_lock(tte_vaddr, tte_data, HV_MMU_DMMU); + hypervisor_tlb_lock(tte_vaddr, tte_data, HV_MMU_IMMU); + } + } else { + prom_dtlb_load(tlb_ent, tte_data, tte_vaddr); + prom_itlb_load(tlb_ent, tte_data, tte_vaddr); + if (bigkernel) { + tlb_ent -= 1; + prom_dtlb_load(tlb_ent, + tte_data + 0x400000, + tte_vaddr + 0x400000); + prom_itlb_load(tlb_ent, + tte_data + 0x400000, + tte_vaddr + 0x400000); + } + sparc64_highest_unlocked_tlb_ent = tlb_ent - 1; } - sparc64_highest_unlocked_tlb_ent = tlb_ent - 1; if (tlb_type == cheetah_plus) { sparc64_kern_pri_context = (CTX_CHEETAH_PLUS_CTX0 | CTX_CHEETAH_PLUS_NUC); diff --git a/arch/sparc64/prom/init.c b/arch/sparc64/prom/init.c index f3cc2d8578b..095755e428a 100644 --- a/arch/sparc64/prom/init.c +++ b/arch/sparc64/prom/init.c @@ -18,7 +18,6 @@ enum prom_major_version prom_vers; unsigned int prom_rev, prom_prev; /* The root node of the prom device tree. */ -int prom_root_node; int prom_stdin, prom_stdout; int prom_chosen_node; @@ -41,26 +40,22 @@ void __init prom_init(void *cif_handler, void *cif_stack) prom_cif_init(cif_handler, cif_stack); - prom_root_node = prom_getsibling(0); - if((prom_root_node == 0) || (prom_root_node == -1)) - prom_halt(); - prom_chosen_node = prom_finddevice(prom_chosen_path); if (!prom_chosen_node || prom_chosen_node == -1) prom_halt(); - prom_stdin = prom_getint (prom_chosen_node, "stdin"); - prom_stdout = prom_getint (prom_chosen_node, "stdout"); + prom_stdin = prom_getint(prom_chosen_node, "stdin"); + prom_stdout = prom_getint(prom_chosen_node, "stdout"); node = prom_finddevice("/openprom"); if (!node || node == -1) prom_halt(); - prom_getstring (node, "version", buffer, sizeof (buffer)); + prom_getstring(node, "version", buffer, sizeof (buffer)); - prom_printf ("\n"); + prom_printf("\n"); - if (strncmp (buffer, "OBP ", 4)) + if (strncmp(buffer, "OBP ", 4)) goto strange_version; /* @@ -70,7 +65,7 @@ void __init prom_init(void *cif_handler, void *cif_stack) * accordingly. -spot */ - if (strncmp (buffer, "OBP ", 5)) + if (strncmp(buffer, "OBP ", 5)) bufadjust = 4; else bufadjust = 5; @@ -87,7 +82,8 @@ void __init prom_init(void *cif_handler, void *cif_stack) prom_rev = ints[1]; prom_prev = (ints[0] << 16) | (ints[1] << 8) | ints[2]; - printk ("PROMLIB: Sun IEEE Boot Prom %s\n", buffer + bufadjust); + printk("PROMLIB: Sun IEEE Boot Prom %s\n", buffer + bufadjust); + printk("PROMLIB: Root node compatible: %s\n", prom_root_compatible); /* Initialization successful. */ return; diff --git a/arch/sparc64/prom/tree.c b/arch/sparc64/prom/tree.c index b1ff9e87dcc..49075abd7cb 100644 --- a/arch/sparc64/prom/tree.c +++ b/arch/sparc64/prom/tree.c @@ -51,7 +51,7 @@ prom_getparent(int node) __inline__ int __prom_getsibling(int node) { - return p1275_cmd ("peer", P1275_INOUT(1, 1), node); + return p1275_cmd(prom_peer_name, P1275_INOUT(1, 1), node); } __inline__ int @@ -59,9 +59,12 @@ prom_getsibling(int node) { int sibnode; - if(node == -1) return 0; + if (node == -1) + return 0; sibnode = __prom_getsibling(node); - if(sibnode == -1) return 0; + if (sibnode == -1) + return 0; + return sibnode; } -- cgit v1.2.3-18-g5258 From 3a8c069d0eea936c2fe3637ab62967af31555ee9 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 9 Feb 2006 02:54:54 -0800 Subject: [SPARC64]: Print ARCH as SUN4V when tlb_type is hypervisor. Signed-off-by: David S. Miller --- arch/sparc64/kernel/setup.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index 7f02c8f71df..cec921f6cdb 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -597,7 +597,10 @@ void __init setup_arch(char **cmdline_p) *cmdline_p = prom_getbootargs(); strcpy(saved_command_line, *cmdline_p); - printk("ARCH: SUN4U\n"); + if (tlb_type == hypervisor) + printk("ARCH: SUN4V\n"); + else + printk("ARCH: SUN4U\n"); #ifdef CONFIG_DUMMY_CONSOLE conswitchp = &dummy_con; -- cgit v1.2.3-18-g5258 From 12816ab38adddc9d7e9b3315d1739655dedc7c9f Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 9 Feb 2006 03:00:00 -0800 Subject: [SPARC64]: kernel/cpu.c needs asm/spitfire.h For 'tlb_type'. Signed-off-by: David S. Miller --- arch/sparc64/kernel/cpu.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/sparc64/kernel/cpu.c b/arch/sparc64/kernel/cpu.c index c7a4fb39702..11cc0caef59 100644 --- a/arch/sparc64/kernel/cpu.c +++ b/arch/sparc64/kernel/cpu.c @@ -13,6 +13,7 @@ #include #include #include +#include DEFINE_PER_CPU(cpuinfo_sparc, __cpu_data) = { 0 }; -- cgit v1.2.3-18-g5258 From aa9143b9719c07fb6f1f6207790c9c5086ae07e7 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 9 Feb 2006 16:12:22 -0800 Subject: [SPARC64]: Implement sun4v TSB miss handlers. When we register a TSB with the hypervisor, so that it or hardware can handle TLB misses and do the TSB walk for us, the hypervisor traps down to these trap when it incurs a TSB miss. Processing is simple, we load the missing virtual address and context, and do a full page table walk. Signed-off-by: David S. Miller --- arch/sparc64/kernel/sun4v_tlb_miss.S | 51 ++++++++++++++++++++++++++++++++++++ arch/sparc64/kernel/tsb.S | 7 +++-- arch/sparc64/kernel/ttable.S | 15 ++++++----- 3 files changed, 64 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/sun4v_tlb_miss.S b/arch/sparc64/kernel/sun4v_tlb_miss.S index 58ea5dd8573..b8678b5557a 100644 --- a/arch/sparc64/kernel/sun4v_tlb_miss.S +++ b/arch/sparc64/kernel/sun4v_tlb_miss.S @@ -187,6 +187,57 @@ sun4v_dtlb_prot: ba,pt %xcc, sparc64_realfault_common mov FAULT_CODE_DTLB | FAULT_CODE_WRITE, %g4 + /* Called from trap table with &trap_block[smp_processor_id()] in + * %g5 and SCRATCHPAD_UTSBREG1 contents in %g1. + */ +sun4v_itsb_miss: + ldx [%g5 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_I_ADDR_OFFSET], %g4 + ldx [%g5 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_I_CTX_OFFSET], %g5 + + srlx %g4, 22, %g7 + sllx %g5, 48, %g6 + or %g6, %g7, %g6 + brz,pn %g5, kvmap_itlb_4v + nop + + ba,pt %xcc, sun4v_tsb_miss_common + mov FAULT_CODE_ITLB, %g3 + + /* Called from trap table with &trap_block[smp_processor_id()] in + * %g5 and SCRATCHPAD_UTSBREG1 contents in %g1. + */ +sun4v_dtsb_miss: + ldx [%g5 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_D_ADDR_OFFSET], %g4 + ldx [%g5 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_D_CTX_OFFSET], %g5 + + srlx %g4, 22, %g7 + sllx %g5, 48, %g6 + or %g6, %g7, %g6 + brz,pn %g5, kvmap_dtlb_4v + nop + + mov FAULT_CODE_DTLB, %g3 + + /* Create TSB pointer into %g1. This is something like: + * + * index_mask = (512 << (tsb_reg & 0x7UL)) - 1UL; + * tsb_base = tsb_reg & ~0x7UL; + * tsb_index = ((vaddr >> PAGE_SHIFT) & tsb_mask); + * tsb_ptr = tsb_base + (tsb_index * 16); + */ +sun4v_tsb_miss_common: + and %g1, 0x7, %g2 + andn %g1, 0x7, %g1 + mov 512, %g7 + sllx %g7, %g2, %g7 + sub %g7, 1, %g7 + srlx %g4, PAGE_SHIFT, %g2 + and %g2, %g7, %g2 + sllx %g2, 4, %g2 + ba,pt %xcc, tsb_miss_page_table_walk + add %g1, %g2, %g1 + + #define BRANCH_ALWAYS 0x10680000 #define NOP 0x01000000 #define SUN4V_DO_PATCH(OLD, NEW) \ diff --git a/arch/sparc64/kernel/tsb.S b/arch/sparc64/kernel/tsb.S index 819a6ef9799..c848c8847cd 100644 --- a/arch/sparc64/kernel/tsb.S +++ b/arch/sparc64/kernel/tsb.S @@ -35,8 +35,11 @@ tsb_miss_itlb: nop /* The sun4v TLB miss handlers jump directly here instead - * of tsb_miss_{d,i}tlb with the missing virtual address - * already loaded into %g4. + * of tsb_miss_{d,i}tlb with registers setup as follows: + * + * %g4: missing virtual address + * %g1: TSB entry address loaded + * %g6: TAG TARGET ((vaddr >> 22) | (ctx << 48)) */ tsb_miss_page_table_walk: TRAP_LOAD_PGD_PHYS(%g7, %g5) diff --git a/arch/sparc64/kernel/ttable.S b/arch/sparc64/kernel/ttable.S index 1608ba4bf1c..a9d210e11eb 100644 --- a/arch/sparc64/kernel/ttable.S +++ b/arch/sparc64/kernel/ttable.S @@ -1,7 +1,6 @@ -/* $Id: ttable.S,v 1.38 2002/02/09 19:49:30 davem Exp $ - * ttable.S: Sparc V9 Trap Table(s) with SpitFire/Cheetah extensions. +/* ttable.S: Sparc V9 Trap Table(s) with SpitFire/Cheetah/SUN4V extensions. * - * Copyright (C) 1996, 2001 David S. Miller (davem@caip.rutgers.edu) + * Copyright (C) 1996, 2001, 2006 David S. Miller (davem@davemloft.net) */ #include @@ -22,7 +21,8 @@ tl0_iax: membar #Sync tl0_resv009: BTRAP(0x9) tl0_iae: membar #Sync TRAP_NOSAVE_7INSNS(__spitfire_access_error) -tl0_resv00b: BTRAP(0xb) BTRAP(0xc) BTRAP(0xd) BTRAP(0xe) BTRAP(0xf) +tl0_itsb_4v: SUN4V_ITSB_MISS +tl0_resv00c: BTRAP(0xc) BTRAP(0xd) BTRAP(0xe) BTRAP(0xf) tl0_ill: membar #Sync TRAP_7INSNS(do_illegal_instruction) tl0_privop: TRAP(do_privop) @@ -38,7 +38,7 @@ tl0_div0: TRAP(do_div0) tl0_resv029: BTRAP(0x29) BTRAP(0x2a) BTRAP(0x2b) BTRAP(0x2c) BTRAP(0x2d) BTRAP(0x2e) tl0_resv02f: BTRAP(0x2f) tl0_dax: TRAP_NOSAVE(__spitfire_data_access_exception) -tl0_resv031: BTRAP(0x31) +tl0_dtsb_4v: SUN4V_DTSB_MISS tl0_dae: membar #Sync TRAP_NOSAVE_7INSNS(__spitfire_access_error) tl0_resv033: BTRAP(0x33) @@ -185,7 +185,8 @@ tl1_iax: TRAP_NOSAVE(__spitfire_insn_access_exception_tl1) tl1_resv009: BTRAPTL1(0x9) tl1_iae: membar #Sync TRAP_NOSAVE_7INSNS(__spitfire_access_error) -tl1_resv00b: BTRAPTL1(0xb) BTRAPTL1(0xc) BTRAPTL1(0xd) BTRAPTL1(0xe) BTRAPTL1(0xf) +tl1_itsb_4v: SUN4V_ITSB_MISS +tl1_resv00c: BTRAPTL1(0xc) BTRAPTL1(0xd) BTRAPTL1(0xe) BTRAPTL1(0xf) tl1_ill: TRAPTL1(do_ill_tl1) tl1_privop: BTRAPTL1(0x11) tl1_resv012: BTRAPTL1(0x12) BTRAPTL1(0x13) BTRAPTL1(0x14) BTRAPTL1(0x15) @@ -201,7 +202,7 @@ tl1_div0: TRAPTL1(do_div0_tl1) tl1_resv029: BTRAPTL1(0x29) BTRAPTL1(0x2a) BTRAPTL1(0x2b) BTRAPTL1(0x2c) tl1_resv02d: BTRAPTL1(0x2d) BTRAPTL1(0x2e) BTRAPTL1(0x2f) tl1_dax: TRAP_NOSAVE(__spitfire_data_access_exception_tl1) -tl1_resv031: BTRAPTL1(0x31) +tl1_dtsb_4v: SUN4V_DTSB_MISS tl1_dae: membar #Sync TRAP_NOSAVE_7INSNS(__spitfire_access_error) tl1_resv033: BTRAPTL1(0x33) -- cgit v1.2.3-18-g5258 From 618e9ed98aed924a1fc664eb6522db4a5e927043 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 9 Feb 2006 17:21:53 -0800 Subject: [SPARC64]: Hypervisor TSB context switching. Signed-off-by: David S. Miller --- arch/sparc64/kernel/tsb.S | 42 ++++++++++++++++++++++++++--------------- arch/sparc64/mm/tsb.c | 48 ++++++++++++++++++++++++++++++++++++++++++++++- 2 files changed, 74 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/tsb.S b/arch/sparc64/kernel/tsb.S index c848c8847cd..a53ec6fb769 100644 --- a/arch/sparc64/kernel/tsb.S +++ b/arch/sparc64/kernel/tsb.S @@ -4,6 +4,7 @@ */ #include +#include .text .align 32 @@ -233,6 +234,7 @@ tsb_flush: * %o1: TSB register value * %o2: TSB virtual address * %o3: TSB mapping locked PTE + * %o4: Hypervisor TSB descriptor physical address * * We have to run this whole thing with interrupts * disabled so that the current cpu doesn't change @@ -251,30 +253,40 @@ __tsb_context_switch: add %g2, %g1, %g2 stx %o0, [%g2 + TRAP_PER_CPU_PGD_PADDR] -661: mov TSB_REG, %g1 - stxa %o1, [%g1] ASI_DMMU - .section .sun4v_2insn_patch, "ax" - .word 661b + sethi %hi(tlb_type), %g1 + lduw [%g1 + %lo(tlb_type)], %g1 + cmp %g1, 3 + bne,pt %icc, 1f + nop + + /* Hypervisor TSB switch. */ mov SCRATCHPAD_UTSBREG1, %g1 stxa %o1, [%g1] ASI_SCRATCHPAD - .previous + mov -1, %g2 + mov SCRATCHPAD_UTSBREG2, %g1 + stxa %g2, [%g1] ASI_SCRATCHPAD - membar #Sync + mov HV_FAST_MMU_TSB_CTXNON0, %o0 + mov 1, %o1 + mov %o4, %o2 + ta HV_FAST_TRAP + + ba,pt %xcc, 9f + nop -661: stxa %o1, [%g1] ASI_IMMU + /* SUN4U TSB switch. */ +1: mov TSB_REG, %g1 + stxa %o1, [%g1] ASI_DMMU + membar #Sync + stxa %o1, [%g1] ASI_IMMU membar #Sync - .section .sun4v_2insn_patch, "ax" - .word 661b - nop - nop - .previous - brz %o2, 9f +2: brz %o2, 9f nop - sethi %hi(sparc64_highest_unlocked_tlb_ent), %o4 + sethi %hi(sparc64_highest_unlocked_tlb_ent), %g2 mov TLB_TAG_ACCESS, %g1 - lduw [%o4 + %lo(sparc64_highest_unlocked_tlb_ent)], %g2 + lduw [%g2 + %lo(sparc64_highest_unlocked_tlb_ent)], %g2 stxa %o2, [%g1] ASI_DMMU membar #Sync sllx %g2, 3, %g2 diff --git a/arch/sparc64/mm/tsb.c b/arch/sparc64/mm/tsb.c index 2cc8e6528c6..6ae2a5a702c 100644 --- a/arch/sparc64/mm/tsb.c +++ b/arch/sparc64/mm/tsb.c @@ -149,7 +149,7 @@ static void setup_tsb_params(struct mm_struct *mm, unsigned long tsb_bytes) BUG(); }; - if (tlb_type == cheetah_plus) { + if (tlb_type == cheetah_plus || tlb_type == hypervisor) { /* Physical mapping, no locked TLB entry for TSB. */ tsb_reg |= tsb_paddr; @@ -166,6 +166,52 @@ static void setup_tsb_params(struct mm_struct *mm, unsigned long tsb_bytes) mm->context.tsb_map_pte = tte; } + /* Setup the Hypervisor TSB descriptor. */ + if (tlb_type == hypervisor) { + struct hv_tsb_descr *hp = &mm->context.tsb_descr; + + switch (PAGE_SIZE) { + case 8192: + default: + hp->pgsz_idx = HV_PGSZ_IDX_8K; + break; + + case 64 * 1024: + hp->pgsz_idx = HV_PGSZ_IDX_64K; + break; + + case 512 * 1024: + hp->pgsz_idx = HV_PGSZ_IDX_512K; + break; + + case 4 * 1024 * 1024: + hp->pgsz_idx = HV_PGSZ_IDX_4MB; + break; + }; + hp->assoc = 1; + hp->num_ttes = tsb_bytes / 16; + hp->ctx_idx = 0; + switch (PAGE_SIZE) { + case 8192: + default: + hp->pgsz_mask = HV_PGSZ_MASK_8K; + break; + + case 64 * 1024: + hp->pgsz_mask = HV_PGSZ_MASK_64K; + break; + + case 512 * 1024: + hp->pgsz_mask = HV_PGSZ_MASK_512K; + break; + + case 4 * 1024 * 1024: + hp->pgsz_mask = HV_PGSZ_MASK_4MB; + break; + }; + hp->tsb_base = tsb_paddr; + hp->resv = 0; + } } /* The page tables are locked against modifications while this -- cgit v1.2.3-18-g5258 From ed6b0b45437dcf7ef1c48b3be413bebcc84771d8 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 9 Feb 2006 20:20:34 -0800 Subject: [SPARC64]: SUN4V memory exception trap handlers. Signed-off-by: David S. Miller --- arch/sparc64/kernel/sun4v_tlb_miss.S | 170 +++++++++++++++++++++++++++++++++++ arch/sparc64/kernel/traps.c | 108 ++++++++++++++++++++-- arch/sparc64/kernel/unaligned.c | 45 +++++++--- arch/sparc64/kernel/winfixup.S | 26 ++++-- 4 files changed, 325 insertions(+), 24 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/sun4v_tlb_miss.S b/arch/sparc64/kernel/sun4v_tlb_miss.S index b8678b5557a..c408b05a5f0 100644 --- a/arch/sparc64/kernel/sun4v_tlb_miss.S +++ b/arch/sparc64/kernel/sun4v_tlb_miss.S @@ -237,6 +237,167 @@ sun4v_tsb_miss_common: ba,pt %xcc, tsb_miss_page_table_walk add %g1, %g2, %g1 + /* Instruction Access Exception, tl0. */ +sun4v_iacc: + mov SCRATCHPAD_CPUID, %g1 + ldxa [%g1] ASI_SCRATCHPAD, %g3 + sethi %hi(trap_block), %g2 + or %g2, %lo(trap_block), %g2 + sllx %g3, TRAP_BLOCK_SZ_SHIFT, %g3 + add %g2, %g3, %g2 + ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_I_TYPE_OFFSET], %g3 + ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_I_ADDR_OFFSET], %g4 + ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_I_CTX_OFFSET], %g5 + sllx %g3, 16, %g3 + or %g5, %g3, %g5 + ba,pt %xcc, etrap + rd %pc, %g7 + mov %l4, %o1 + mov %l5, %o2 + call sun4v_insn_access_exception + add %sp, PTREGS_OFF, %o0 + ba,a,pt %xcc, rtrap_clr_l6 + + /* Instruction Access Exception, tl1. */ +sun4v_iacc_tl1: + mov SCRATCHPAD_CPUID, %g1 + ldxa [%g1] ASI_SCRATCHPAD, %g3 + sethi %hi(trap_block), %g2 + or %g2, %lo(trap_block), %g2 + sllx %g3, TRAP_BLOCK_SZ_SHIFT, %g3 + add %g2, %g3, %g2 + ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_I_TYPE_OFFSET], %g3 + ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_I_ADDR_OFFSET], %g4 + ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_I_CTX_OFFSET], %g5 + sllx %g3, 16, %g3 + or %g5, %g3, %g5 + ba,pt %xcc, etraptl1 + rd %pc, %g7 + mov %l4, %o1 + mov %l5, %o2 + call sun4v_insn_access_exception_tl1 + add %sp, PTREGS_OFF, %o0 + ba,a,pt %xcc, rtrap_clr_l6 + + /* Data Access Exception, tl0. */ +sun4v_dacc: + mov SCRATCHPAD_CPUID, %g1 + ldxa [%g1] ASI_SCRATCHPAD, %g3 + sethi %hi(trap_block), %g2 + or %g2, %lo(trap_block), %g2 + sllx %g3, TRAP_BLOCK_SZ_SHIFT, %g3 + add %g2, %g3, %g2 + ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_D_TYPE_OFFSET], %g3 + ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_D_ADDR_OFFSET], %g4 + ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_D_CTX_OFFSET], %g5 + sllx %g3, 16, %g3 + or %g5, %g3, %g5 + ba,pt %xcc, etrap + rd %pc, %g7 + mov %l4, %o1 + mov %l5, %o2 + call sun4v_data_access_exception + add %sp, PTREGS_OFF, %o0 + ba,a,pt %xcc, rtrap_clr_l6 + + /* Data Access Exception, tl1. */ +sun4v_dacc_tl1: + mov SCRATCHPAD_CPUID, %g1 + ldxa [%g1] ASI_SCRATCHPAD, %g3 + sethi %hi(trap_block), %g2 + or %g2, %lo(trap_block), %g2 + sllx %g3, TRAP_BLOCK_SZ_SHIFT, %g3 + add %g2, %g3, %g2 + ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_D_TYPE_OFFSET], %g3 + ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_D_ADDR_OFFSET], %g4 + ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_D_CTX_OFFSET], %g5 + sllx %g3, 16, %g3 + or %g5, %g3, %g5 + ba,pt %xcc, etraptl1 + rd %pc, %g7 + mov %l4, %o1 + mov %l5, %o2 + call sun4v_data_access_exception_tl1 + add %sp, PTREGS_OFF, %o0 + ba,a,pt %xcc, rtrap_clr_l6 + + /* Memory Address Unaligned. */ +sun4v_mna: + mov SCRATCHPAD_CPUID, %g1 + ldxa [%g1] ASI_SCRATCHPAD, %g3 + sethi %hi(trap_block), %g2 + or %g2, %lo(trap_block), %g2 + sllx %g3, TRAP_BLOCK_SZ_SHIFT, %g3 + add %g2, %g3, %g2 + mov HV_FAULT_TYPE_UNALIGNED, %g3 + ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_D_ADDR_OFFSET], %g4 + ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_D_CTX_OFFSET], %g5 + sllx %g3, 16, %g3 + or %g5, %g3, %g5 + + /* Window fixup? */ + rdpr %tl, %g2 + cmp %g2, 1 + bgu,pn %icc, winfix_mna + rdpr %tpc, %g3 + + ba,pt %xcc, etrap + rd %pc, %g7 + mov %l4, %o1 + mov %l5, %o2 + call sun4v_mna + add %sp, PTREGS_OFF, %o0 + ba,a,pt %xcc, rtrap_clr_l6 + + /* Privileged Action. */ +sun4v_privact: + ba,pt %xcc, etrap + rd %pc, %g7 + call do_privact + add %sp, PTREGS_OFF, %o0 + ba,a,pt %xcc, rtrap_clr_l6 + + /* Unaligned ldd float, tl0. */ +sun4v_lddfmna: + mov SCRATCHPAD_CPUID, %g1 + ldxa [%g1] ASI_SCRATCHPAD, %g3 + sethi %hi(trap_block), %g2 + or %g2, %lo(trap_block), %g2 + sllx %g3, TRAP_BLOCK_SZ_SHIFT, %g3 + add %g2, %g3, %g2 + ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_D_TYPE_OFFSET], %g3 + ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_D_ADDR_OFFSET], %g4 + ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_D_CTX_OFFSET], %g5 + sllx %g3, 16, %g3 + or %g5, %g3, %g5 + ba,pt %xcc, etrap + rd %pc, %g7 + mov %l4, %o1 + mov %l5, %o2 + call handle_lddfmna + add %sp, PTREGS_OFF, %o0 + ba,a,pt %xcc, rtrap_clr_l6 + + /* Unaligned std float, tl0. */ +sun4v_stdfmna: + mov SCRATCHPAD_CPUID, %g1 + ldxa [%g1] ASI_SCRATCHPAD, %g3 + sethi %hi(trap_block), %g2 + or %g2, %lo(trap_block), %g2 + sllx %g3, TRAP_BLOCK_SZ_SHIFT, %g3 + add %g2, %g3, %g2 + ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_D_TYPE_OFFSET], %g3 + ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_D_ADDR_OFFSET], %g4 + ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_D_CTX_OFFSET], %g5 + sllx %g3, 16, %g3 + or %g5, %g3, %g5 + ba,pt %xcc, etrap + rd %pc, %g7 + mov %l4, %o1 + mov %l5, %o2 + call handle_stdfmna + add %sp, PTREGS_OFF, %o0 + ba,a,pt %xcc, rtrap_clr_l6 #define BRANCH_ALWAYS 0x10680000 #define NOP 0x01000000 @@ -265,6 +426,15 @@ sun4v_patch_tlb_handlers: SUN4V_DO_PATCH(tl1_damiss, sun4v_dtlb_miss) SUN4V_DO_PATCH(tl0_daprot, sun4v_dtlb_prot) SUN4V_DO_PATCH(tl1_daprot, sun4v_dtlb_prot) + SUN4V_DO_PATCH(tl0_iax, sun4v_iacc) + SUN4V_DO_PATCH(tl1_iax, sun4v_iacc_tl1) + SUN4V_DO_PATCH(tl0_dax, sun4v_dacc) + SUN4V_DO_PATCH(tl1_dax, sun4v_dacc_tl1) + SUN4V_DO_PATCH(tl0_mna, sun4v_mna) + SUN4V_DO_PATCH(tl1_mna, sun4v_mna) + SUN4V_DO_PATCH(tl0_lddfmna, sun4v_lddfmna) + SUN4V_DO_PATCH(tl0_stdfmna, sun4v_stdfmna) + SUN4V_DO_PATCH(tl0_privact, sun4v_privact) retl nop .size sun4v_patch_tlb_handlers,.-sun4v_patch_tlb_handlers diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c index ac171161e79..1e9a4b6b1fe 100644 --- a/arch/sparc64/kernel/traps.c +++ b/arch/sparc64/kernel/traps.c @@ -180,6 +180,45 @@ void spitfire_insn_access_exception_tl1(struct pt_regs *regs, unsigned long sfsr spitfire_insn_access_exception(regs, sfsr, sfar); } +void sun4v_insn_access_exception(struct pt_regs *regs, unsigned long addr, unsigned long type_ctx) +{ + unsigned short type = (type_ctx >> 16); + unsigned short ctx = (type_ctx & 0xffff); + siginfo_t info; + + if (notify_die(DIE_TRAP, "instruction access exception", regs, + 0, 0x8, SIGTRAP) == NOTIFY_STOP) + return; + + if (regs->tstate & TSTATE_PRIV) { + printk("sun4v_insn_access_exception: ADDR[%016lx] " + "CTX[%04x] TYPE[%04x], going.\n", + addr, ctx, type); + die_if_kernel("Iax", regs); + } + + if (test_thread_flag(TIF_32BIT)) { + regs->tpc &= 0xffffffff; + regs->tnpc &= 0xffffffff; + } + info.si_signo = SIGSEGV; + info.si_errno = 0; + info.si_code = SEGV_MAPERR; + info.si_addr = (void __user *) addr; + info.si_trapno = 0; + force_sig_info(SIGSEGV, &info, current); +} + +void sun4v_insn_access_exception_tl1(struct pt_regs *regs, unsigned long addr, unsigned long type_ctx) +{ + if (notify_die(DIE_TRAP_TL1, "instruction access exception tl1", regs, + 0, 0x8, SIGTRAP) == NOTIFY_STOP) + return; + + dump_tl1_traplog((struct tl1_traplog *)(regs + 1)); + sun4v_insn_access_exception(regs, addr, type_ctx); +} + void spitfire_data_access_exception(struct pt_regs *regs, unsigned long sfsr, unsigned long sfar) { siginfo_t info; @@ -228,6 +267,45 @@ void spitfire_data_access_exception_tl1(struct pt_regs *regs, unsigned long sfsr spitfire_data_access_exception(regs, sfsr, sfar); } +void sun4v_data_access_exception(struct pt_regs *regs, unsigned long addr, unsigned long type_ctx) +{ + unsigned short type = (type_ctx >> 16); + unsigned short ctx = (type_ctx & 0xffff); + siginfo_t info; + + if (notify_die(DIE_TRAP, "data access exception", regs, + 0, 0x8, SIGTRAP) == NOTIFY_STOP) + return; + + if (regs->tstate & TSTATE_PRIV) { + printk("sun4v_data_access_exception: ADDR[%016lx] " + "CTX[%04x] TYPE[%04x], going.\n", + addr, ctx, type); + die_if_kernel("Iax", regs); + } + + if (test_thread_flag(TIF_32BIT)) { + regs->tpc &= 0xffffffff; + regs->tnpc &= 0xffffffff; + } + info.si_signo = SIGSEGV; + info.si_errno = 0; + info.si_code = SEGV_MAPERR; + info.si_addr = (void __user *) addr; + info.si_trapno = 0; + force_sig_info(SIGSEGV, &info, current); +} + +void sun4v_data_access_exception_tl1(struct pt_regs *regs, unsigned long addr, unsigned long type_ctx) +{ + if (notify_die(DIE_TRAP_TL1, "data access exception tl1", regs, + 0, 0x8, SIGTRAP) == NOTIFY_STOP) + return; + + dump_tl1_traplog((struct tl1_traplog *)(regs + 1)); + sun4v_data_access_exception(regs, addr, type_ctx); +} + #ifdef CONFIG_PCI /* This is really pathetic... */ extern volatile int pci_poke_in_progress; @@ -2150,6 +2228,8 @@ void do_illegal_instruction(struct pt_regs *regs) force_sig_info(SIGILL, &info, current); } +extern void kernel_unaligned_trap(struct pt_regs *regs, unsigned int insn); + void mem_address_unaligned(struct pt_regs *regs, unsigned long sfar, unsigned long sfsr) { siginfo_t info; @@ -2159,13 +2239,7 @@ void mem_address_unaligned(struct pt_regs *regs, unsigned long sfar, unsigned lo return; if (regs->tstate & TSTATE_PRIV) { - extern void kernel_unaligned_trap(struct pt_regs *regs, - unsigned int insn, - unsigned long sfar, - unsigned long sfsr); - - kernel_unaligned_trap(regs, *((unsigned int *)regs->tpc), - sfar, sfsr); + kernel_unaligned_trap(regs, *((unsigned int *)regs->tpc)); return; } info.si_signo = SIGBUS; @@ -2176,6 +2250,26 @@ void mem_address_unaligned(struct pt_regs *regs, unsigned long sfar, unsigned lo force_sig_info(SIGBUS, &info, current); } +void sun4v_mna(struct pt_regs *regs, unsigned long addr, unsigned long type_ctx) +{ + siginfo_t info; + + if (notify_die(DIE_TRAP, "memory address unaligned", regs, + 0, 0x34, SIGSEGV) == NOTIFY_STOP) + return; + + if (regs->tstate & TSTATE_PRIV) { + kernel_unaligned_trap(regs, *((unsigned int *)regs->tpc)); + return; + } + info.si_signo = SIGBUS; + info.si_errno = 0; + info.si_code = BUS_ADRALN; + info.si_addr = (void __user *) addr; + info.si_trapno = 0; + force_sig_info(SIGBUS, &info, current); +} + void do_privop(struct pt_regs *regs) { siginfo_t info; diff --git a/arch/sparc64/kernel/unaligned.c b/arch/sparc64/kernel/unaligned.c index 70faf630603..001e8518331 100644 --- a/arch/sparc64/kernel/unaligned.c +++ b/arch/sparc64/kernel/unaligned.c @@ -277,7 +277,7 @@ static void kernel_mna_trap_fault(void) regs->tstate |= (ASI_AIUS << 24UL); } -asmlinkage void kernel_unaligned_trap(struct pt_regs *regs, unsigned int insn, unsigned long sfar, unsigned long sfsr) +asmlinkage void kernel_unaligned_trap(struct pt_regs *regs, unsigned int insn) { enum direction dir = decode_direction(insn); int size = decode_access_size(insn); @@ -405,6 +405,9 @@ extern void do_privact(struct pt_regs *regs); extern void spitfire_data_access_exception(struct pt_regs *regs, unsigned long sfsr, unsigned long sfar); +extern void sun4v_data_access_exception(struct pt_regs *regs, + unsigned long addr, + unsigned long type_ctx); int handle_ldf_stq(u32 insn, struct pt_regs *regs) { @@ -447,14 +450,20 @@ int handle_ldf_stq(u32 insn, struct pt_regs *regs) break; } default: - spitfire_data_access_exception(regs, 0, addr); + if (tlb_type == hypervisor) + sun4v_data_access_exception(regs, addr, 0); + else + spitfire_data_access_exception(regs, 0, addr); return 1; } if (put_user (first >> 32, (u32 __user *)addr) || __put_user ((u32)first, (u32 __user *)(addr + 4)) || __put_user (second >> 32, (u32 __user *)(addr + 8)) || __put_user ((u32)second, (u32 __user *)(addr + 12))) { - spitfire_data_access_exception(regs, 0, addr); + if (tlb_type == hypervisor) + sun4v_data_access_exception(regs, addr, 0); + else + spitfire_data_access_exception(regs, 0, addr); return 1; } } else { @@ -467,7 +476,10 @@ int handle_ldf_stq(u32 insn, struct pt_regs *regs) do_privact(regs); return 1; } else if (asi > ASI_SNFL) { - spitfire_data_access_exception(regs, 0, addr); + if (tlb_type == hypervisor) + sun4v_data_access_exception(regs, addr, 0); + else + spitfire_data_access_exception(regs, 0, addr); return 1; } switch (insn & 0x180000) { @@ -484,7 +496,10 @@ int handle_ldf_stq(u32 insn, struct pt_regs *regs) err |= __get_user (data[i], (u32 __user *)(addr + 4*i)); } if (err && !(asi & 0x2 /* NF */)) { - spitfire_data_access_exception(regs, 0, addr); + if (tlb_type == hypervisor) + sun4v_data_access_exception(regs, addr, 0); + else + spitfire_data_access_exception(regs, 0, addr); return 1; } if (asi & 0x8) /* Little */ { @@ -548,7 +563,7 @@ void handle_lddfmna(struct pt_regs *regs, unsigned long sfar, unsigned long sfsr u32 insn; u32 first, second; u64 value; - u8 asi, freg; + u8 freg; int flag; struct fpustate *f = FPUSTATE; @@ -557,7 +572,7 @@ void handle_lddfmna(struct pt_regs *regs, unsigned long sfar, unsigned long sfsr if (test_thread_flag(TIF_32BIT)) pc = (u32)pc; if (get_user(insn, (u32 __user *) pc) != -EFAULT) { - asi = sfsr >> 16; + int asi = decode_asi(insn, regs); if ((asi > ASI_SNFL) || (asi < ASI_P)) goto daex; @@ -587,7 +602,11 @@ void handle_lddfmna(struct pt_regs *regs, unsigned long sfar, unsigned long sfsr *(u64 *)(f->regs + freg) = value; current_thread_info()->fpsaved[0] |= flag; } else { -daex: spitfire_data_access_exception(regs, sfsr, sfar); +daex: + if (tlb_type == hypervisor) + sun4v_data_access_exception(regs, sfar, sfsr); + else + spitfire_data_access_exception(regs, sfsr, sfar); return; } advance(regs); @@ -600,7 +619,7 @@ void handle_stdfmna(struct pt_regs *regs, unsigned long sfar, unsigned long sfsr unsigned long tstate = regs->tstate; u32 insn; u64 value; - u8 asi, freg; + u8 freg; int flag; struct fpustate *f = FPUSTATE; @@ -609,8 +628,8 @@ void handle_stdfmna(struct pt_regs *regs, unsigned long sfar, unsigned long sfsr if (test_thread_flag(TIF_32BIT)) pc = (u32)pc; if (get_user(insn, (u32 __user *) pc) != -EFAULT) { + int asi = decode_asi(insn, regs); freg = ((insn >> 25) & 0x1e) | ((insn >> 20) & 0x20); - asi = sfsr >> 16; value = 0; flag = (freg < 32) ? FPRS_DL : FPRS_DU; if ((asi > ASI_SNFL) || @@ -631,7 +650,11 @@ void handle_stdfmna(struct pt_regs *regs, unsigned long sfar, unsigned long sfsr __put_user ((u32)value, (u32 __user *)(sfar + 4))) goto daex; } else { -daex: spitfire_data_access_exception(regs, sfsr, sfar); +daex: + if (tlb_type == hypervisor) + sun4v_data_access_exception(regs, sfar, sfsr); + else + spitfire_data_access_exception(regs, sfsr, sfar); return; } advance(regs); diff --git a/arch/sparc64/kernel/winfixup.S b/arch/sparc64/kernel/winfixup.S index efe2770e8f5..aca2a98b930 100644 --- a/arch/sparc64/kernel/winfixup.S +++ b/arch/sparc64/kernel/winfixup.S @@ -109,16 +109,23 @@ winfix_mna: done fill_fixup_mna: - TRAP_LOAD_THREAD_REG(%g6, %g1) rdpr %tstate, %g1 and %g1, TSTATE_CWP, %g1 wrpr %g1, %cwp ba,pt %xcc, etrap rd %pc, %g7 - mov %l4, %o2 - mov %l5, %o1 - call mem_address_unaligned + sethi %hi(tlb_type), %g1 + mov %l4, %o1 + lduw [%g1 + %lo(tlb_type)], %g1 + mov %l5, %o2 + cmp %g1, 3 + bne,pt %icc, 1f add %sp, PTREGS_OFF, %o0 + call sun4v_mna + nop + ba,a,pt %xcc, rtrap_clr_l6 +1: call mem_address_unaligned + nop ba,a,pt %xcc, rtrap_clr_l6 winfix_dax: @@ -128,14 +135,21 @@ winfix_dax: done fill_fixup_dax: - TRAP_LOAD_THREAD_REG(%g6, %g1) rdpr %tstate, %g1 and %g1, TSTATE_CWP, %g1 wrpr %g1, %cwp ba,pt %xcc, etrap rd %pc, %g7 + sethi %hi(tlb_type), %g1 mov %l4, %o1 + lduw [%g1 + %lo(tlb_type)], %g1 mov %l5, %o2 - call spitfire_data_access_exception + cmp %g1, 3 + bne,pt %icc, 1f add %sp, PTREGS_OFF, %o0 + call sun4v_data_access_exception + nop + ba,a,pt %xcc, rtrap_clr_l6 +1: call spitfire_data_access_exception + nop ba,a,pt %xcc, rtrap_clr_l6 -- cgit v1.2.3-18-g5258 From 4cce4b7cc56abc3d7b269d09224b8297aad15138 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 9 Feb 2006 20:46:22 -0800 Subject: [SPARC64]: Fetch cpu mid properly on sun4v. If there is a "cpuid" property, use that. Else suck it out of the top bits of the "reg" property. Signed-off-by: David S. Miller --- arch/sparc64/kernel/devices.c | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/devices.c b/arch/sparc64/kernel/devices.c index df9a1ca8fd7..ac11d872ef7 100644 --- a/arch/sparc64/kernel/devices.c +++ b/arch/sparc64/kernel/devices.c @@ -29,13 +29,30 @@ DEFINE_SPINLOCK(ns87303_lock); extern void cpu_probe(void); extern void central_probe(void); -static char *cpu_mid_prop(void) +static const char *cpu_mid_prop(void) { if (tlb_type == spitfire) return "upa-portid"; return "portid"; } +static int get_cpu_mid(int prom_node) +{ + if (tlb_type == hypervisor) { + struct linux_prom64_registers reg; + + if (prom_getproplen(prom_node, "cpuid") == 4) + return prom_getintdefault(prom_node, "cpuid", 0); + + prom_getproperty(prom_node, "reg", (char *) ®, sizeof(reg)); + return (reg.phys_addr >> 32) & 0x0fffffffUL; + } else { + const char *prop_name = cpu_mid_prop(); + + return prom_getintdefault(prom_node, prop_name, 0); + } +} + static int check_cpu_node(int nd, int *cur_inst, int (*compare)(int, int, void *), void *compare_arg, int *prom_node, int *mid) @@ -50,7 +67,7 @@ static int check_cpu_node(int nd, int *cur_inst, if (prom_node) *prom_node = nd; if (mid) - *mid = prom_getintdefault(nd, cpu_mid_prop(), 0); + *mid = get_cpu_mid(nd); return 0; } @@ -105,7 +122,7 @@ static int cpu_mid_compare(int nd, int instance, void *_arg) int desired_mid = (int) (long) _arg; int this_mid; - this_mid = prom_getintdefault(nd, cpu_mid_prop(), 0); + this_mid = get_cpu_mid(nd); if (this_mid == desired_mid) return 0; return -ENODEV; -- cgit v1.2.3-18-g5258 From 8f6a93a196ba6c569c3e8daa6e81cca7e3ba81b1 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 9 Feb 2006 21:32:07 -0800 Subject: [SPARC64]: Beginnings of SUN4V PCI controller support. Abstract out IOMMU operations so that we can have a different set of calls on sun4v, which needs to do things through hypervisor calls. Signed-off-by: David S. Miller --- arch/sparc64/kernel/Makefile | 2 +- arch/sparc64/kernel/pci.c | 13 ++++++++ arch/sparc64/kernel/pci_iommu.c | 27 ++++++++++----- arch/sparc64/kernel/pci_sun4v.c | 74 +++++++++++++++++++++++++++++++++++++++++ 4 files changed, 107 insertions(+), 9 deletions(-) create mode 100644 arch/sparc64/kernel/pci_sun4v.c (limited to 'arch') diff --git a/arch/sparc64/kernel/Makefile b/arch/sparc64/kernel/Makefile index a482a9ffe5b..44043390e34 100644 --- a/arch/sparc64/kernel/Makefile +++ b/arch/sparc64/kernel/Makefile @@ -14,7 +14,7 @@ obj-y := process.o setup.o cpu.o idprom.o \ power.o sbus.o iommu_common.o sparc64_ksyms.o chmc.o obj-$(CONFIG_PCI) += ebus.o isa.o pci_common.o pci_iommu.o \ - pci_psycho.o pci_sabre.o pci_schizo.o + pci_psycho.o pci_sabre.o pci_schizo.o pci_sun4v.o obj-$(CONFIG_SMP) += smp.o trampoline.o obj-$(CONFIG_SPARC32_COMPAT) += sys32.o sys_sparc32.o signal32.o obj-$(CONFIG_BINFMT_ELF32) += binfmt_elf32.o diff --git a/arch/sparc64/kernel/pci.c b/arch/sparc64/kernel/pci.c index 2ff7c32ab0c..95ffa941862 100644 --- a/arch/sparc64/kernel/pci.c +++ b/arch/sparc64/kernel/pci.c @@ -188,6 +188,7 @@ extern void psycho_init(int, char *); extern void schizo_init(int, char *); extern void schizo_plus_init(int, char *); extern void tomatillo_init(int, char *); +extern void sun4v_pci_init(int, char *); static struct { char *model_name; @@ -204,6 +205,7 @@ static struct { { "pci108e,8002", schizo_plus_init }, { "SUNW,tomatillo", tomatillo_init }, { "pci108e,a801", tomatillo_init }, + { "SUNW,sun4v-pci", sun4v_pci_init }, }; #define PCI_NUM_CONTROLLER_TYPES (sizeof(pci_controller_table) / \ sizeof(pci_controller_table[0])) @@ -283,6 +285,12 @@ int __init pcic_present(void) return pci_controller_scan(pci_is_controller); } +struct pci_iommu_ops *pci_iommu_ops; +EXPORT_SYMBOL(pci_iommu_ops); + +extern struct pci_iommu_ops pci_sun4u_iommu_ops, + pci_sun4v_iommu_ops; + /* Find each controller in the system, attach and initialize * software state structure for each and link into the * pci_controller_root. Setup the controller enough such @@ -290,6 +298,11 @@ int __init pcic_present(void) */ static void __init pci_controller_probe(void) { + if (tlb_type == hypervisor) + pci_iommu_ops = &pci_sun4v_iommu_ops; + else + pci_iommu_ops = &pci_sun4u_iommu_ops; + printk("PCI: Probing for controllers.\n"); pci_controller_scan(pci_controller_init); diff --git a/arch/sparc64/kernel/pci_iommu.c b/arch/sparc64/kernel/pci_iommu.c index a11910be101..8e52232f6f3 100644 --- a/arch/sparc64/kernel/pci_iommu.c +++ b/arch/sparc64/kernel/pci_iommu.c @@ -219,7 +219,7 @@ static inline void iommu_free_ctx(struct pci_iommu *iommu, int ctx) * DMA for PCI device PDEV. Return non-NULL cpu-side address if * successful and set *DMA_ADDRP to the PCI side dma address. */ -void *pci_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp) +static void *pci_4u_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp) { struct pcidev_cookie *pcp; struct pci_iommu *iommu; @@ -267,7 +267,7 @@ void *pci_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_ad } /* Free and unmap a consistent DMA translation. */ -void pci_free_consistent(struct pci_dev *pdev, size_t size, void *cpu, dma_addr_t dvma) +static void pci_4u_free_consistent(struct pci_dev *pdev, size_t size, void *cpu, dma_addr_t dvma) { struct pcidev_cookie *pcp; struct pci_iommu *iommu; @@ -294,7 +294,7 @@ void pci_free_consistent(struct pci_dev *pdev, size_t size, void *cpu, dma_addr_ /* Map a single buffer at PTR of SZ bytes for PCI DMA * in streaming mode. */ -dma_addr_t pci_map_single(struct pci_dev *pdev, void *ptr, size_t sz, int direction) +static dma_addr_t pci_4u_map_single(struct pci_dev *pdev, void *ptr, size_t sz, int direction) { struct pcidev_cookie *pcp; struct pci_iommu *iommu; @@ -415,7 +415,7 @@ do_flush_sync: } /* Unmap a single streaming mode DMA translation. */ -void pci_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int direction) +static void pci_4u_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int direction) { struct pcidev_cookie *pcp; struct pci_iommu *iommu; @@ -548,7 +548,7 @@ static inline void fill_sg(iopte_t *iopte, struct scatterlist *sg, * When making changes here, inspect the assembly output. I was having * hard time to kepp this routine out of using stack slots for holding variables. */ -int pci_map_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, int direction) +static int pci_4u_map_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, int direction) { struct pcidev_cookie *pcp; struct pci_iommu *iommu; @@ -635,7 +635,7 @@ bad_no_ctx: } /* Unmap a set of streaming mode DMA translations. */ -void pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, int direction) +static void pci_4u_unmap_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, int direction) { struct pcidev_cookie *pcp; struct pci_iommu *iommu; @@ -695,7 +695,7 @@ void pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, /* Make physical memory consistent for a single * streaming mode DMA translation after a transfer. */ -void pci_dma_sync_single_for_cpu(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int direction) +static void pci_4u_dma_sync_single_for_cpu(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int direction) { struct pcidev_cookie *pcp; struct pci_iommu *iommu; @@ -735,7 +735,7 @@ void pci_dma_sync_single_for_cpu(struct pci_dev *pdev, dma_addr_t bus_addr, size /* Make physical memory consistent for a set of streaming * mode DMA translations after a transfer. */ -void pci_dma_sync_sg_for_cpu(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, int direction) +static void pci_4u_dma_sync_sg_for_cpu(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, int direction) { struct pcidev_cookie *pcp; struct pci_iommu *iommu; @@ -776,6 +776,17 @@ void pci_dma_sync_sg_for_cpu(struct pci_dev *pdev, struct scatterlist *sglist, i spin_unlock_irqrestore(&iommu->lock, flags); } +struct pci_iommu_ops pci_sun4u_iommu_ops = { + .alloc_consistent = pci_4u_alloc_consistent, + .free_consistent = pci_4u_free_consistent, + .map_single = pci_4u_map_single, + .unmap_single = pci_4u_unmap_single, + .map_sg = pci_4u_map_sg, + .unmap_sg = pci_4u_unmap_sg, + .dma_sync_single_for_cpu = pci_4u_dma_sync_single_for_cpu, + .dma_sync_sg_for_cpu = pci_4u_dma_sync_sg_for_cpu, +}; + static void ali_sound_dma_hack(struct pci_dev *pdev, int set_bit) { struct pci_dev *ali_isa_bridge; diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c new file mode 100644 index 00000000000..c1a077196c5 --- /dev/null +++ b/arch/sparc64/kernel/pci_sun4v.c @@ -0,0 +1,74 @@ +/* pci_sun4v.c: SUN4V specific PCI controller support. + * + * Copyright (C) 2006 David S. Miller (davem@davemloft.net) + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include "pci_impl.h" +#include "iommu_common.h" + +static void *pci_4v_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp) +{ + return NULL; +} + +static void pci_4v_free_consistent(struct pci_dev *pdev, size_t size, void *cpu, dma_addr_t dvma) +{ +} + +static dma_addr_t pci_4v_map_single(struct pci_dev *pdev, void *ptr, size_t sz, int direction) +{ + return 0; +} + +static void pci_4v_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int direction) +{ +} + +static int pci_4v_map_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, int direction) +{ + return nelems; +} + +static void pci_4v_unmap_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, int direction) +{ +} + +static void pci_4v_dma_sync_single_for_cpu(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int direction) +{ +} + +static void pci_4v_dma_sync_sg_for_cpu(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, int direction) +{ +} + +struct pci_iommu_ops pci_sun4v_iommu_ops = { + .alloc_consistent = pci_4v_alloc_consistent, + .free_consistent = pci_4v_free_consistent, + .map_single = pci_4v_map_single, + .unmap_single = pci_4v_unmap_single, + .map_sg = pci_4v_map_sg, + .unmap_sg = pci_4v_unmap_sg, + .dma_sync_single_for_cpu = pci_4v_dma_sync_single_for_cpu, + .dma_sync_sg_for_cpu = pci_4v_dma_sync_sg_for_cpu, +}; + +void sun4v_pci_init(int node, char *model_name) +{ + prom_printf("sun4v_pci_init: Implement me.\n"); + prom_halt(); +} -- cgit v1.2.3-18-g5258 From bade5622167181844cd4e60087971c1f949e149f Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 9 Feb 2006 22:05:54 -0800 Subject: [SPARC64]: More SUN4V PCI controller work. Add assembler file for PCI hypervisor calls. Setup basic skeleton of SUN4V PCI controller driver. Add 32-bit devhandle to PBM struct, as this is needed for hypervisor calls. Signed-off-by: David S. Miller --- arch/sparc64/kernel/Makefile | 3 +- arch/sparc64/kernel/pci_sun4v.c | 286 ++++++++++++++++++++++++++++++++++++ arch/sparc64/kernel/pci_sun4v.h | 20 +++ arch/sparc64/kernel/pci_sun4v_asm.S | 56 +++++++ 4 files changed, 364 insertions(+), 1 deletion(-) create mode 100644 arch/sparc64/kernel/pci_sun4v.h create mode 100644 arch/sparc64/kernel/pci_sun4v_asm.S (limited to 'arch') diff --git a/arch/sparc64/kernel/Makefile b/arch/sparc64/kernel/Makefile index 44043390e34..fedfd9c6729 100644 --- a/arch/sparc64/kernel/Makefile +++ b/arch/sparc64/kernel/Makefile @@ -14,7 +14,8 @@ obj-y := process.o setup.o cpu.o idprom.o \ power.o sbus.o iommu_common.o sparc64_ksyms.o chmc.o obj-$(CONFIG_PCI) += ebus.o isa.o pci_common.o pci_iommu.o \ - pci_psycho.o pci_sabre.o pci_schizo.o pci_sun4v.o + pci_psycho.o pci_sabre.o pci_schizo.o \ + pci_sun4v.o pci_sun4v_asm.o obj-$(CONFIG_SMP) += smp.o trampoline.o obj-$(CONFIG_SPARC32_COMPAT) += sys32.o sys_sparc32.o signal32.o obj-$(CONFIG_BINFMT_ELF32) += binfmt_elf32.o diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c index c1a077196c5..1d61353e264 100644 --- a/arch/sparc64/kernel/pci_sun4v.c +++ b/arch/sparc64/kernel/pci_sun4v.c @@ -21,6 +21,8 @@ #include "pci_impl.h" #include "iommu_common.h" +#include "pci_sun4v.h" + static void *pci_4v_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp) { return NULL; @@ -67,8 +69,292 @@ struct pci_iommu_ops pci_sun4v_iommu_ops = { .dma_sync_sg_for_cpu = pci_4v_dma_sync_sg_for_cpu, }; +/* SUN4V PCI configuration space accessors. */ + +static int pci_sun4v_read_pci_cfg(struct pci_bus *bus_dev, unsigned int devfn, + int where, int size, u32 *value) +{ + /* XXX Implement me! XXX */ + return 0; +} + +static int pci_sun4v_write_pci_cfg(struct pci_bus *bus_dev, unsigned int devfn, + int where, int size, u32 value) +{ + /* XXX Implement me! XXX */ + return 0; +} + +static struct pci_ops pci_sun4v_ops = { + .read = pci_sun4v_read_pci_cfg, + .write = pci_sun4v_write_pci_cfg, +}; + + +static void pci_sun4v_scan_bus(struct pci_controller_info *p) +{ + /* XXX Implement me! XXX */ +} + +static unsigned int pci_sun4v_irq_build(struct pci_pbm_info *pbm, + struct pci_dev *pdev, + unsigned int ino) +{ + /* XXX Implement me! XXX */ + return 0; +} + +/* XXX correct? XXX */ +static void pci_sun4v_base_address_update(struct pci_dev *pdev, int resource) +{ + struct pcidev_cookie *pcp = pdev->sysdata; + struct pci_pbm_info *pbm = pcp->pbm; + struct resource *res, *root; + u32 reg; + int where, size, is_64bit; + + res = &pdev->resource[resource]; + if (resource < 6) { + where = PCI_BASE_ADDRESS_0 + (resource * 4); + } else if (resource == PCI_ROM_RESOURCE) { + where = pdev->rom_base_reg; + } else { + /* Somebody might have asked allocation of a non-standard resource */ + return; + } + + is_64bit = 0; + if (res->flags & IORESOURCE_IO) + root = &pbm->io_space; + else { + root = &pbm->mem_space; + if ((res->flags & PCI_BASE_ADDRESS_MEM_TYPE_MASK) + == PCI_BASE_ADDRESS_MEM_TYPE_64) + is_64bit = 1; + } + + size = res->end - res->start; + pci_read_config_dword(pdev, where, ®); + reg = ((reg & size) | + (((u32)(res->start - root->start)) & ~size)); + if (resource == PCI_ROM_RESOURCE) { + reg |= PCI_ROM_ADDRESS_ENABLE; + res->flags |= IORESOURCE_ROM_ENABLE; + } + pci_write_config_dword(pdev, where, reg); + + /* This knows that the upper 32-bits of the address + * must be zero. Our PCI common layer enforces this. + */ + if (is_64bit) + pci_write_config_dword(pdev, where + 4, 0); +} + +/* XXX correct? XXX */ +static void pci_sun4v_resource_adjust(struct pci_dev *pdev, + struct resource *res, + struct resource *root) +{ + res->start += root->start; + res->end += root->start; +} + +/* Use ranges property to determine where PCI MEM, I/O, and Config + * space are for this PCI bus module. + */ +static void pci_sun4v_determine_mem_io_space(struct pci_pbm_info *pbm) +{ + int i, saw_cfg, saw_mem, saw_io; + + saw_cfg = saw_mem = saw_io = 0; + for (i = 0; i < pbm->num_pbm_ranges; i++) { + struct linux_prom_pci_ranges *pr = &pbm->pbm_ranges[i]; + unsigned long a; + int type; + + type = (pr->child_phys_hi >> 24) & 0x3; + a = (((unsigned long)pr->parent_phys_hi << 32UL) | + ((unsigned long)pr->parent_phys_lo << 0UL)); + + switch (type) { + case 0: + /* PCI config space, 16MB */ + pbm->config_space = a; + saw_cfg = 1; + break; + + case 1: + /* 16-bit IO space, 16MB */ + pbm->io_space.start = a; + pbm->io_space.end = a + ((16UL*1024UL*1024UL) - 1UL); + pbm->io_space.flags = IORESOURCE_IO; + saw_io = 1; + break; + + case 2: + /* 32-bit MEM space, 2GB */ + pbm->mem_space.start = a; + pbm->mem_space.end = a + (0x80000000UL - 1UL); + pbm->mem_space.flags = IORESOURCE_MEM; + saw_mem = 1; + break; + + default: + break; + }; + } + + if (!saw_cfg || !saw_io || !saw_mem) { + prom_printf("%s: Fatal error, missing %s PBM range.\n", + pbm->name, + ((!saw_cfg ? + "CFG" : + (!saw_io ? + "IO" : "MEM")))); + prom_halt(); + } + + printk("%s: PCI CFG[%lx] IO[%lx] MEM[%lx]\n", + pbm->name, + pbm->config_space, + pbm->io_space.start, + pbm->mem_space.start); +} + +static void pbm_register_toplevel_resources(struct pci_controller_info *p, + struct pci_pbm_info *pbm) +{ + pbm->io_space.name = pbm->mem_space.name = pbm->name; + + request_resource(&ioport_resource, &pbm->io_space); + request_resource(&iomem_resource, &pbm->mem_space); + pci_register_legacy_regions(&pbm->io_space, + &pbm->mem_space); +} + +static void pci_sun4v_iommu_init(struct pci_pbm_info *pbm) +{ + /* XXX Implement me! XXX */ +} + +static void pci_sun4v_pbm_init(struct pci_controller_info *p, int prom_node) +{ + struct pci_pbm_info *pbm; + struct linux_prom64_registers regs; + unsigned int busrange[2]; + int err; + + /* XXX */ + pbm = &p->pbm_A; + + pbm->parent = p; + pbm->prom_node = prom_node; + pbm->pci_first_slot = 1; + + prom_getproperty(prom_node, "reg", (char *)®s, sizeof(regs)); + pbm->devhandle = (regs.phys_addr >> 32UL) & 0x0fffffff; + + sprintf(pbm->name, "SUN4V-PCI%d PBM%c", + p->index, (pbm == &p->pbm_A ? 'A' : 'B')); + + printk("%s: devhandle[%x]\n", pbm->name, pbm->devhandle); + + prom_getstring(prom_node, "name", + pbm->prom_name, sizeof(pbm->prom_name)); + + err = prom_getproperty(prom_node, "ranges", + (char *) pbm->pbm_ranges, + sizeof(pbm->pbm_ranges)); + if (err == 0 || err == -1) { + prom_printf("%s: Fatal error, no ranges property.\n", + pbm->name); + prom_halt(); + } + + pbm->num_pbm_ranges = + (err / sizeof(struct linux_prom_pci_ranges)); + + pci_sun4v_determine_mem_io_space(pbm); + pbm_register_toplevel_resources(p, pbm); + + err = prom_getproperty(prom_node, "interrupt-map", + (char *)pbm->pbm_intmap, + sizeof(pbm->pbm_intmap)); + if (err != -1) { + pbm->num_pbm_intmap = (err / sizeof(struct linux_prom_pci_intmap)); + err = prom_getproperty(prom_node, "interrupt-map-mask", + (char *)&pbm->pbm_intmask, + sizeof(pbm->pbm_intmask)); + if (err == -1) { + prom_printf("%s: Fatal error, no " + "interrupt-map-mask.\n", pbm->name); + prom_halt(); + } + } else { + pbm->num_pbm_intmap = 0; + memset(&pbm->pbm_intmask, 0, sizeof(pbm->pbm_intmask)); + } + + err = prom_getproperty(prom_node, "bus-range", + (char *)&busrange[0], + sizeof(busrange)); + if (err == 0 || err == -1) { + prom_printf("%s: Fatal error, no bus-range.\n", pbm->name); + prom_halt(); + } + pbm->pci_first_busno = busrange[0]; + pbm->pci_last_busno = busrange[1]; + + pci_sun4v_iommu_init(pbm); +} + void sun4v_pci_init(int node, char *model_name) { + struct pci_controller_info *p; + struct pci_iommu *iommu; + + p = kmalloc(sizeof(struct pci_controller_info), GFP_ATOMIC); + if (!p) { + prom_printf("SUN4V_PCI: Fatal memory allocation error.\n"); + prom_halt(); + } + memset(p, 0, sizeof(*p)); + + iommu = kmalloc(sizeof(struct pci_iommu), GFP_ATOMIC); + if (!iommu) { + prom_printf("SCHIZO: Fatal memory allocation error.\n"); + prom_halt(); + } + memset(iommu, 0, sizeof(*iommu)); + p->pbm_A.iommu = iommu; + + iommu = kmalloc(sizeof(struct pci_iommu), GFP_ATOMIC); + if (!iommu) { + prom_printf("SCHIZO: Fatal memory allocation error.\n"); + prom_halt(); + } + memset(iommu, 0, sizeof(*iommu)); + p->pbm_B.iommu = iommu; + + p->next = pci_controller_root; + pci_controller_root = p; + + p->index = pci_num_controllers++; + p->pbms_same_domain = 0; + + p->scan_bus = pci_sun4v_scan_bus; + p->irq_build = pci_sun4v_irq_build; + p->base_address_update = pci_sun4v_base_address_update; + p->resource_adjust = pci_sun4v_resource_adjust; + p->pci_ops = &pci_sun4v_ops; + + /* Like PSYCHO and SCHIZO we have a 2GB aligned area + * for memory space. + */ + pci_memspace_mask = 0x7fffffffUL; + + pci_sun4v_pbm_init(p, node); + prom_printf("sun4v_pci_init: Implement me.\n"); prom_halt(); } diff --git a/arch/sparc64/kernel/pci_sun4v.h b/arch/sparc64/kernel/pci_sun4v.h new file mode 100644 index 00000000000..d3ac7ece4b3 --- /dev/null +++ b/arch/sparc64/kernel/pci_sun4v.h @@ -0,0 +1,20 @@ +/* pci_sun4v.h: SUN4V specific PCI controller support. + * + * Copyright (C) 2006 David S. Miller (davem@davemloft.net) + */ + +#ifndef _PCI_SUN4V_H +#define _PCI_SUN4V_H + +extern unsigned long pci_sun4v_devino_to_sysino(unsigned long devhandle, + unsigned long deino); +extern unsigned long pci_sun4v_iommu_map(unsigned long devhandle, + unsigned long tsbid, + unsigned long num_ttes, + unsigned long io_attributes, + unsigned long io_page_list_pa); +extern unsigned long pci_sun4v_iommu_demap(unsigned long devhandle, + unsigned long tsbid, + unsigned long num_ttes); + +#endif /* !(_PCI_SUN4V_H) */ diff --git a/arch/sparc64/kernel/pci_sun4v_asm.S b/arch/sparc64/kernel/pci_sun4v_asm.S new file mode 100644 index 00000000000..fd2fe0edf16 --- /dev/null +++ b/arch/sparc64/kernel/pci_sun4v_asm.S @@ -0,0 +1,56 @@ +/* pci_sun4v_asm: Hypervisor calls for PCI support. + * + * Copyright (C) 2006 David S. Miller + */ + +#include + + /* %o0: devhandle + * %o1: devino + * + * returns %o0: sysino + */ + .globl pci_sun4v_devino_to_sysino +pci_sun4v_devino_to_sysino: + mov %o1, %o2 + mov %o0, %o1 + mov HV_FAST_INTR_DEVINO2SYSINO, %o0 + ta HV_FAST_TRAP + retl + mov %o1, %o0 + + /* %o0: devhandle + * %o1: tsbid + * %o2: num ttes + * %o3: io_attributes + * %o4: io_page_list phys address + * + * returns %o0: num ttes mapped + */ + .globl pci_sun4v_iommu_map +pci_sun4v_iommu_map: + mov %o4, %o5 + mov %o3, %o4 + mov %o2, %o3 + mov %o1, %o2 + mov %o0, %o1 + mov HV_FAST_PCI_IOMMU_MAP, %o0 + ta HV_FAST_TRAP + retl + mov %o1, %o0 + + /* %o0: devhandle + * %o1: tsbid + * %o2: num ttes + * + * returns %o0: num ttes demapped + */ + .globl pci_sun4v_iommu_demap +pci_sun4v_iommu_demap: + mov %o2, %o3 + mov %o1, %o2 + mov %o0, %o1 + mov HV_FAST_PCI_IOMMU_DEMAP, %o0 + ta HV_FAST_TRAP + retl + mov %o1, %o0 -- cgit v1.2.3-18-g5258 From 7eae642f75e0f7fbce7c37b2dfe0641ff1e9ebfd Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 9 Feb 2006 22:20:01 -0800 Subject: [SPARC64]: Implement SUN4V PCI config space access. Signed-off-by: David S. Miller --- arch/sparc64/kernel/pci_sun4v.c | 40 +++++++++++++++++++++++++++---- arch/sparc64/kernel/pci_sun4v.h | 9 +++++++ arch/sparc64/kernel/pci_sun4v_asm.S | 48 +++++++++++++++++++++++++++++++++++++ 3 files changed, 93 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c index 1d61353e264..abd9bfb245c 100644 --- a/arch/sparc64/kernel/pci_sun4v.c +++ b/arch/sparc64/kernel/pci_sun4v.c @@ -74,15 +74,47 @@ struct pci_iommu_ops pci_sun4v_iommu_ops = { static int pci_sun4v_read_pci_cfg(struct pci_bus *bus_dev, unsigned int devfn, int where, int size, u32 *value) { - /* XXX Implement me! XXX */ - return 0; + struct pci_pbm_info *pbm = bus_dev->sysdata; + unsigned long devhandle = pbm->devhandle; + unsigned int bus = bus_dev->number; + unsigned int device = PCI_SLOT(devfn); + unsigned int func = PCI_FUNC(devfn); + unsigned long ret; + + ret = pci_sun4v_config_get(devhandle, + HV_PCI_DEVICE_BUILD(bus, device, func), + where, size); + switch (size) { + case 1: + *value = ret & 0xff; + break; + case 2: + *value = ret & 0xffff; + break; + case 4: + *value = ret & 0xffffffff; + break; + }; + + + return PCIBIOS_SUCCESSFUL; } static int pci_sun4v_write_pci_cfg(struct pci_bus *bus_dev, unsigned int devfn, int where, int size, u32 value) { - /* XXX Implement me! XXX */ - return 0; + struct pci_pbm_info *pbm = bus_dev->sysdata; + unsigned long devhandle = pbm->devhandle; + unsigned int bus = bus_dev->number; + unsigned int device = PCI_SLOT(devfn); + unsigned int func = PCI_FUNC(devfn); + unsigned long ret; + + ret = pci_sun4v_config_put(devhandle, + HV_PCI_DEVICE_BUILD(bus, device, func), + where, size, value); + + return PCIBIOS_SUCCESSFUL; } static struct pci_ops pci_sun4v_ops = { diff --git a/arch/sparc64/kernel/pci_sun4v.h b/arch/sparc64/kernel/pci_sun4v.h index d3ac7ece4b3..5c7ed2ca150 100644 --- a/arch/sparc64/kernel/pci_sun4v.h +++ b/arch/sparc64/kernel/pci_sun4v.h @@ -16,5 +16,14 @@ extern unsigned long pci_sun4v_iommu_map(unsigned long devhandle, extern unsigned long pci_sun4v_iommu_demap(unsigned long devhandle, unsigned long tsbid, unsigned long num_ttes); +extern unsigned long pci_sun4v_config_get(unsigned long devhandle, + unsigned long pci_device, + unsigned long config_offset, + unsigned long size); +extern int pci_sun4v_config_put(unsigned long devhandle, + unsigned long pci_device, + unsigned long config_offset, + unsigned long size, + unsigned long data); #endif /* !(_PCI_SUN4V_H) */ diff --git a/arch/sparc64/kernel/pci_sun4v_asm.S b/arch/sparc64/kernel/pci_sun4v_asm.S index fd2fe0edf16..2f1147146ab 100644 --- a/arch/sparc64/kernel/pci_sun4v_asm.S +++ b/arch/sparc64/kernel/pci_sun4v_asm.S @@ -54,3 +54,51 @@ pci_sun4v_iommu_demap: ta HV_FAST_TRAP retl mov %o1, %o0 + + /* %o0: devhandle + * %o1: pci_device + * %o2: pci_config_offset + * %o3: size + * + * returns %o0: data + * + * If there is an error, the data will be returned + * as all 1's. + */ + .globl pci_sun4v_config_get +pci_sun4v_config_get: + mov %o3, %o4 + mov %o2, %o3 + mov %o1, %o2 + mov %o0, %o1 + mov HV_FAST_PCI_CONFIG_GET, %o0 + ta HV_FAST_TRAP + brnz,a,pn %o1, 1f + mov -1, %o2 +1: retl + mov %o2, %o0 + + /* %o0: devhandle + * %o1: pci_device + * %o2: pci_config_offset + * %o3: size + * %o4: data + * + * returns %o0: status + * + * status will be zero if the operation completed + * successfully, else -1 if not + */ + .globl pci_sun4v_config_put +pci_sun4v_config_put: + mov %o3, %o4 + mov %o2, %o3 + mov %o1, %o2 + mov %o0, %o1 + mov HV_FAST_PCI_CONFIG_PUT, %o0 + ta HV_FAST_TRAP + brnz,a,pn %o1, 1f + mov -1, %o1 +1: retl + mov %o1, %o0 + -- cgit v1.2.3-18-g5258 From 164c220fa3947abbada65329d168f421b461a2a7 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 9 Feb 2006 22:57:21 -0800 Subject: [SPARC64]: Fix hypervisor call arg passing. Function goes in %o5, args go in %o0 --> %o5. Signed-off-by: David S. Miller --- arch/sparc64/kernel/irq.c | 8 +++--- arch/sparc64/kernel/smp.c | 16 ++++++------ arch/sparc64/kernel/trampoline.S | 56 ++++++++++++++++++++-------------------- arch/sparc64/kernel/tsb.S | 6 ++--- arch/sparc64/mm/init.c | 20 +++++++------- 5 files changed, 53 insertions(+), 53 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index 1f6455503f2..c5dd6daf127 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -863,10 +863,10 @@ void init_irqwork_curcpu(void) static void __cpuinit init_one_mondo(unsigned long *pa_ptr, unsigned long type) { - register unsigned long func __asm__("%o0"); - register unsigned long arg0 __asm__("%o1"); - register unsigned long arg1 __asm__("%o2"); - register unsigned long arg2 __asm__("%o3"); + register unsigned long func __asm__("%o5"); + register unsigned long arg0 __asm__("%o0"); + register unsigned long arg1 __asm__("%o1"); + register unsigned long arg2 __asm__("%o2"); unsigned long page = get_zeroed_page(GFP_ATOMIC); if (!page) { diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index c10a3a8639e..f553264588d 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -572,10 +572,10 @@ static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t retries = 0; cnt = init_cpu_list(cpu_list, mask); do { - register unsigned long func __asm__("%o0"); - register unsigned long arg0 __asm__("%o1"); - register unsigned long arg1 __asm__("%o2"); - register unsigned long arg2 __asm__("%o3"); + register unsigned long func __asm__("%o5"); + register unsigned long arg0 __asm__("%o0"); + register unsigned long arg1 __asm__("%o1"); + register unsigned long arg2 __asm__("%o2"); func = HV_FAST_CPU_MONDO_SEND; arg0 = cnt; @@ -624,10 +624,10 @@ static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t int retries = 0; do { - register unsigned long func __asm__("%o0"); - register unsigned long arg0 __asm__("%o1"); - register unsigned long arg1 __asm__("%o2"); - register unsigned long arg2 __asm__("%o3"); + register unsigned long func __asm__("%o5"); + register unsigned long arg0 __asm__("%o0"); + register unsigned long arg1 __asm__("%o1"); + register unsigned long arg2 __asm__("%o2"); cpu_list[0] = i; func = HV_FAST_CPU_MONDO_SEND; diff --git a/arch/sparc64/kernel/trampoline.S b/arch/sparc64/kernel/trampoline.S index ffa8b79632c..c476f5b321f 100644 --- a/arch/sparc64/kernel/trampoline.S +++ b/arch/sparc64/kernel/trampoline.S @@ -265,20 +265,20 @@ do_unlock: nop niagara_lock_tlb: - mov HV_FAST_MMU_MAP_PERM_ADDR, %o0 - sethi %hi(KERNBASE), %o1 - clr %o2 - sethi %hi(kern_locked_tte_data), %o3 - ldx [%o3 + %lo(kern_locked_tte_data)], %o3 - mov HV_MMU_IMMU, %o4 + mov HV_FAST_MMU_MAP_PERM_ADDR, %o5 + sethi %hi(KERNBASE), %o0 + clr %o1 + sethi %hi(kern_locked_tte_data), %o2 + ldx [%o2 + %lo(kern_locked_tte_data)], %o2 + mov HV_MMU_IMMU, %o3 ta HV_FAST_TRAP - mov HV_FAST_MMU_MAP_PERM_ADDR, %o0 - sethi %hi(KERNBASE), %o1 - clr %o2 - sethi %hi(kern_locked_tte_data), %o3 - ldx [%o3 + %lo(kern_locked_tte_data)], %o3 - mov HV_MMU_DMMU, %o4 + mov HV_FAST_MMU_MAP_PERM_ADDR, %o5 + sethi %hi(KERNBASE), %o0 + clr %o1 + sethi %hi(kern_locked_tte_data), %o2 + ldx [%o2 + %lo(kern_locked_tte_data)], %o2 + mov HV_MMU_DMMU, %o3 ta HV_FAST_TRAP sethi %hi(bigkernel), %g2 @@ -286,24 +286,24 @@ niagara_lock_tlb: brz,pt %g2, after_lock_tlb nop - mov HV_FAST_MMU_MAP_PERM_ADDR, %o0 - sethi %hi(KERNBASE + 0x400000), %o1 - clr %o2 - sethi %hi(kern_locked_tte_data), %o3 - ldx [%o3 + %lo(kern_locked_tte_data)], %o3 - sethi %hi(0x400000), %o4 - add %o3, %o4, %o3 - mov HV_MMU_IMMU, %o4 + mov HV_FAST_MMU_MAP_PERM_ADDR, %o5 + sethi %hi(KERNBASE + 0x400000), %o0 + clr %o1 + sethi %hi(kern_locked_tte_data), %o2 + ldx [%o2 + %lo(kern_locked_tte_data)], %o2 + sethi %hi(0x400000), %o3 + add %o2, %o3, %o2 + mov HV_MMU_IMMU, %o3 ta HV_FAST_TRAP - mov HV_FAST_MMU_MAP_PERM_ADDR, %o0 - sethi %hi(KERNBASE + 0x400000), %o1 - clr %o2 - sethi %hi(kern_locked_tte_data), %o3 - ldx [%o3 + %lo(kern_locked_tte_data)], %o3 - sethi %hi(0x400000), %o4 - add %o3, %o4, %o3 - mov HV_MMU_DMMU, %o4 + mov HV_FAST_MMU_MAP_PERM_ADDR, %o5 + sethi %hi(KERNBASE + 0x400000), %o0 + clr %o1 + sethi %hi(kern_locked_tte_data), %o2 + ldx [%o2 + %lo(kern_locked_tte_data)], %o2 + sethi %hi(0x400000), %o3 + add %o2, %o3, %o2 + mov HV_MMU_DMMU, %o3 ta HV_FAST_TRAP after_lock_tlb: diff --git a/arch/sparc64/kernel/tsb.S b/arch/sparc64/kernel/tsb.S index a53ec6fb769..8a9351258af 100644 --- a/arch/sparc64/kernel/tsb.S +++ b/arch/sparc64/kernel/tsb.S @@ -266,9 +266,9 @@ __tsb_context_switch: mov SCRATCHPAD_UTSBREG2, %g1 stxa %g2, [%g1] ASI_SCRATCHPAD - mov HV_FAST_MMU_TSB_CTXNON0, %o0 - mov 1, %o1 - mov %o4, %o2 + mov HV_FAST_MMU_TSB_CTXNON0, %o5 + mov 1, %o0 + mov %o4, %o1 ta HV_FAST_TRAP ba,pt %xcc, 9f diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index e602b857071..7faba33202a 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -518,11 +518,11 @@ static void __init hypervisor_tlb_lock(unsigned long vaddr, unsigned long pte, unsigned long mmu) { - register unsigned long func asm("%o0"); - register unsigned long arg0 asm("%o1"); - register unsigned long arg1 asm("%o2"); - register unsigned long arg2 asm("%o3"); - register unsigned long arg3 asm("%o4"); + register unsigned long func asm("%o5"); + register unsigned long arg0 asm("%o0"); + register unsigned long arg1 asm("%o1"); + register unsigned long arg2 asm("%o2"); + register unsigned long arg3 asm("%o3"); func = HV_FAST_MMU_MAP_PERM_ADDR; arg0 = vaddr; @@ -1112,18 +1112,18 @@ static void __init tsb_phys_patch(void) /* Register this cpu's fault status area with the hypervisor. */ void __cpuinit sun4v_register_fault_status(void) { + register unsigned long func asm("%o5"); register unsigned long arg0 asm("%o0"); - register unsigned long arg1 asm("%o1"); int cpu = hard_smp_processor_id(); struct trap_per_cpu *tb = &trap_block[cpu]; unsigned long pa; pa = kern_base + ((unsigned long) tb - KERNBASE); - arg0 = HV_FAST_MMU_FAULT_AREA_CONF; - arg1 = pa; + func = HV_FAST_MMU_FAULT_AREA_CONF; + arg0 = pa; __asm__ __volatile__("ta %4" - : "=&r" (arg0), "=&r" (arg1) - : "0" (arg0), "1" (arg1), + : "=&r" (func), "=&r" (arg0) + : "0" (func), "1" (arg0), "i" (HV_FAST_TRAP)); } -- cgit v1.2.3-18-g5258 From 18397944642cbca7fcd4a109b43ed5b4652e95b9 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 10 Feb 2006 00:08:26 -0800 Subject: [SPARC64]: First cut at SUN4V PCI IOMMU handling. Signed-off-by: David S. Miller --- arch/sparc64/kernel/pci_iommu.c | 6 +- arch/sparc64/kernel/pci_sun4v.c | 525 +++++++++++++++++++++++++++++++++++- arch/sparc64/kernel/pci_sun4v.h | 4 + arch/sparc64/kernel/pci_sun4v_asm.S | 46 ++-- 4 files changed, 550 insertions(+), 31 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/pci_iommu.c b/arch/sparc64/kernel/pci_iommu.c index 8e52232f6f3..c9320eac45d 100644 --- a/arch/sparc64/kernel/pci_iommu.c +++ b/arch/sparc64/kernel/pci_iommu.c @@ -562,9 +562,9 @@ static int pci_4u_map_sg(struct pci_dev *pdev, struct scatterlist *sglist, int n /* Fast path single entry scatterlists. */ if (nelems == 1) { sglist->dma_address = - pci_map_single(pdev, - (page_address(sglist->page) + sglist->offset), - sglist->length, direction); + pci_4u_map_single(pdev, + (page_address(sglist->page) + sglist->offset), + sglist->length, direction); if (unlikely(sglist->dma_address == PCI_DMA_ERROR_CODE)) return 0; sglist->dma_length = sglist->length; diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c index abd9bfb245c..3f0e3c09f4d 100644 --- a/arch/sparc64/kernel/pci_sun4v.c +++ b/arch/sparc64/kernel/pci_sun4v.c @@ -9,6 +9,7 @@ #include #include #include +#include #include #include @@ -23,39 +24,481 @@ #include "pci_sun4v.h" +#define PGLIST_NENTS 2048 + +struct sun4v_pglist { + u64 pglist[PGLIST_NENTS]; +}; + +static DEFINE_PER_CPU(struct sun4v_pglist, iommu_pglists); + +static long pci_arena_alloc(struct pci_iommu_arena *arena, unsigned long npages) +{ + unsigned long n, i, start, end, limit; + int pass; + + limit = arena->limit; + start = arena->hint; + pass = 0; + +again: + n = find_next_zero_bit(arena->map, limit, start); + end = n + npages; + if (unlikely(end >= limit)) { + if (likely(pass < 1)) { + limit = start; + start = 0; + pass++; + goto again; + } else { + /* Scanned the whole thing, give up. */ + return -1; + } + } + + for (i = n; i < end; i++) { + if (test_bit(i, arena->map)) { + start = i + 1; + goto again; + } + } + + for (i = n; i < end; i++) + __set_bit(i, arena->map); + + arena->hint = end; + + return n; +} + +static void pci_arena_free(struct pci_iommu_arena *arena, unsigned long base, unsigned long npages) +{ + unsigned long i; + + for (i = base; i < (base + npages); i++) + __clear_bit(i, arena->map); +} + static void *pci_4v_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp) { - return NULL; + struct pcidev_cookie *pcp; + struct pci_iommu *iommu; + unsigned long devhandle, flags, order, first_page, npages, n; + void *ret; + long entry; + u64 *pglist; + int cpu; + + size = IO_PAGE_ALIGN(size); + order = get_order(size); + if (order >= MAX_ORDER) + return NULL; + + npages = size >> IO_PAGE_SHIFT; + if (npages > PGLIST_NENTS) + return NULL; + + first_page = __get_free_pages(GFP_ATOMIC, order); + if (first_page == 0UL) + return NULL; + memset((char *)first_page, 0, PAGE_SIZE << order); + + pcp = pdev->sysdata; + devhandle = pcp->pbm->devhandle; + iommu = pcp->pbm->iommu; + + spin_lock_irqsave(&iommu->lock, flags); + entry = pci_arena_alloc(&iommu->arena, npages); + spin_unlock_irqrestore(&iommu->lock, flags); + + if (unlikely(entry < 0L)) { + free_pages(first_page, order); + return NULL; + } + + *dma_addrp = (iommu->page_table_map_base + + (entry << IO_PAGE_SHIFT)); + ret = (void *) first_page; + first_page = __pa(first_page); + + cpu = get_cpu(); + + pglist = &__get_cpu_var(iommu_pglists).pglist[0]; + for (n = 0; n < npages; n++) + pglist[n] = first_page + (n * PAGE_SIZE); + + do { + unsigned long num; + + num = pci_sun4v_iommu_map(devhandle, HV_PCI_TSBID(0, entry), + npages, + (HV_PCI_MAP_ATTR_READ | + HV_PCI_MAP_ATTR_WRITE), + __pa(pglist)); + entry += num; + npages -= num; + pglist += num; + } while (npages != 0); + + put_cpu(); + + return ret; } static void pci_4v_free_consistent(struct pci_dev *pdev, size_t size, void *cpu, dma_addr_t dvma) { + struct pcidev_cookie *pcp; + struct pci_iommu *iommu; + unsigned long flags, order, npages, entry, devhandle; + + npages = IO_PAGE_ALIGN(size) >> IO_PAGE_SHIFT; + pcp = pdev->sysdata; + iommu = pcp->pbm->iommu; + devhandle = pcp->pbm->devhandle; + entry = ((dvma - iommu->page_table_map_base) >> IO_PAGE_SHIFT); + + spin_lock_irqsave(&iommu->lock, flags); + + pci_arena_free(&iommu->arena, entry, npages); + + do { + unsigned long num; + + num = pci_sun4v_iommu_demap(devhandle, HV_PCI_TSBID(0, entry), + npages); + entry += num; + npages -= num; + } while (npages != 0); + + spin_unlock_irqrestore(&iommu->lock, flags); + + order = get_order(size); + if (order < 10) + free_pages((unsigned long)cpu, order); } static dma_addr_t pci_4v_map_single(struct pci_dev *pdev, void *ptr, size_t sz, int direction) { - return 0; + struct pcidev_cookie *pcp; + struct pci_iommu *iommu; + unsigned long flags, npages, oaddr; + unsigned long i, base_paddr, devhandle; + u32 bus_addr, ret; + unsigned long prot; + long entry; + u64 *pglist; + int cpu; + + pcp = pdev->sysdata; + iommu = pcp->pbm->iommu; + devhandle = pcp->pbm->devhandle; + + if (unlikely(direction == PCI_DMA_NONE)) + goto bad; + + oaddr = (unsigned long)ptr; + npages = IO_PAGE_ALIGN(oaddr + sz) - (oaddr & IO_PAGE_MASK); + npages >>= IO_PAGE_SHIFT; + if (unlikely(npages > PGLIST_NENTS)) + goto bad; + + spin_lock_irqsave(&iommu->lock, flags); + entry = pci_arena_alloc(&iommu->arena, npages); + spin_unlock_irqrestore(&iommu->lock, flags); + + if (unlikely(entry < 0L)) + goto bad; + + bus_addr = (iommu->page_table_map_base + + (entry << IO_PAGE_SHIFT)); + ret = bus_addr | (oaddr & ~IO_PAGE_MASK); + base_paddr = __pa(oaddr & IO_PAGE_MASK); + prot = HV_PCI_MAP_ATTR_READ; + if (direction != PCI_DMA_TODEVICE) + prot |= HV_PCI_MAP_ATTR_WRITE; + + cpu = get_cpu(); + + pglist = &__get_cpu_var(iommu_pglists).pglist[0]; + for (i = 0; i < npages; i++, base_paddr += IO_PAGE_SIZE) + pglist[i] = base_paddr; + + do { + unsigned long num; + + num = pci_sun4v_iommu_map(devhandle, HV_PCI_TSBID(0, entry), + npages, prot, + __pa(pglist)); + entry += num; + npages -= num; + pglist += num; + } while (npages != 0); + + put_cpu(); + + return ret; + +bad: + if (printk_ratelimit()) + WARN_ON(1); + return PCI_DMA_ERROR_CODE; } static void pci_4v_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int direction) { + struct pcidev_cookie *pcp; + struct pci_iommu *iommu; + unsigned long flags, npages, devhandle; + long entry; + + if (unlikely(direction == PCI_DMA_NONE)) { + if (printk_ratelimit()) + WARN_ON(1); + return; + } + + pcp = pdev->sysdata; + iommu = pcp->pbm->iommu; + devhandle = pcp->pbm->devhandle; + + npages = IO_PAGE_ALIGN(bus_addr + sz) - (bus_addr & IO_PAGE_MASK); + npages >>= IO_PAGE_SHIFT; + bus_addr &= IO_PAGE_MASK; + + spin_lock_irqsave(&iommu->lock, flags); + + entry = (bus_addr - iommu->page_table_map_base) >> IO_PAGE_SHIFT; + pci_arena_free(&iommu->arena, entry, npages); + + do { + unsigned long num; + + num = pci_sun4v_iommu_demap(devhandle, HV_PCI_TSBID(0, entry), + npages); + entry += num; + npages -= num; + } while (npages != 0); + + spin_unlock_irqrestore(&iommu->lock, flags); +} + +#define SG_ENT_PHYS_ADDRESS(SG) \ + (__pa(page_address((SG)->page)) + (SG)->offset) + +static inline void fill_sg(long entry, unsigned long devhandle, + struct scatterlist *sg, + int nused, int nelems, unsigned long prot) +{ + struct scatterlist *dma_sg = sg; + struct scatterlist *sg_end = sg + nelems; + int i, cpu, pglist_ent; + u64 *pglist; + + cpu = get_cpu(); + pglist = &__get_cpu_var(iommu_pglists).pglist[0]; + pglist_ent = 0; + for (i = 0; i < nused; i++) { + unsigned long pteval = ~0UL; + u32 dma_npages; + + dma_npages = ((dma_sg->dma_address & (IO_PAGE_SIZE - 1UL)) + + dma_sg->dma_length + + ((IO_PAGE_SIZE - 1UL))) >> IO_PAGE_SHIFT; + do { + unsigned long offset; + signed int len; + + /* If we are here, we know we have at least one + * more page to map. So walk forward until we + * hit a page crossing, and begin creating new + * mappings from that spot. + */ + for (;;) { + unsigned long tmp; + + tmp = SG_ENT_PHYS_ADDRESS(sg); + len = sg->length; + if (((tmp ^ pteval) >> IO_PAGE_SHIFT) != 0UL) { + pteval = tmp & IO_PAGE_MASK; + offset = tmp & (IO_PAGE_SIZE - 1UL); + break; + } + if (((tmp ^ (tmp + len - 1UL)) >> IO_PAGE_SHIFT) != 0UL) { + pteval = (tmp + IO_PAGE_SIZE) & IO_PAGE_MASK; + offset = 0UL; + len -= (IO_PAGE_SIZE - (tmp & (IO_PAGE_SIZE - 1UL))); + break; + } + sg++; + } + + pteval = (pteval & IOPTE_PAGE); + while (len > 0) { + pglist[pglist_ent++] = pteval; + pteval += IO_PAGE_SIZE; + len -= (IO_PAGE_SIZE - offset); + offset = 0; + dma_npages--; + } + + pteval = (pteval & IOPTE_PAGE) + len; + sg++; + + /* Skip over any tail mappings we've fully mapped, + * adjusting pteval along the way. Stop when we + * detect a page crossing event. + */ + while (sg < sg_end && + (pteval << (64 - IO_PAGE_SHIFT)) != 0UL && + (pteval == SG_ENT_PHYS_ADDRESS(sg)) && + ((pteval ^ + (SG_ENT_PHYS_ADDRESS(sg) + sg->length - 1UL)) >> IO_PAGE_SHIFT) == 0UL) { + pteval += sg->length; + sg++; + } + if ((pteval << (64 - IO_PAGE_SHIFT)) == 0UL) + pteval = ~0UL; + } while (dma_npages != 0); + dma_sg++; + } + + BUG_ON(pglist_ent == 0); + + do { + unsigned long num; + + num = pci_sun4v_iommu_demap(devhandle, HV_PCI_TSBID(0, entry), + pglist_ent); + entry += num; + pglist_ent -= num; + } while (pglist_ent != 0); + + put_cpu(); } static int pci_4v_map_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, int direction) { - return nelems; + struct pcidev_cookie *pcp; + struct pci_iommu *iommu; + unsigned long flags, npages, prot, devhandle; + u32 dma_base; + struct scatterlist *sgtmp; + long entry; + int used; + + /* Fast path single entry scatterlists. */ + if (nelems == 1) { + sglist->dma_address = + pci_4v_map_single(pdev, + (page_address(sglist->page) + sglist->offset), + sglist->length, direction); + if (unlikely(sglist->dma_address == PCI_DMA_ERROR_CODE)) + return 0; + sglist->dma_length = sglist->length; + return 1; + } + + pcp = pdev->sysdata; + iommu = pcp->pbm->iommu; + devhandle = pcp->pbm->devhandle; + + if (unlikely(direction == PCI_DMA_NONE)) + goto bad; + + /* Step 1: Prepare scatter list. */ + npages = prepare_sg(sglist, nelems); + if (unlikely(npages > PGLIST_NENTS)) + goto bad; + + /* Step 2: Allocate a cluster and context, if necessary. */ + spin_lock_irqsave(&iommu->lock, flags); + entry = pci_arena_alloc(&iommu->arena, npages); + spin_unlock_irqrestore(&iommu->lock, flags); + + if (unlikely(entry < 0L)) + goto bad; + + dma_base = iommu->page_table_map_base + + (entry << IO_PAGE_SHIFT); + + /* Step 3: Normalize DMA addresses. */ + used = nelems; + + sgtmp = sglist; + while (used && sgtmp->dma_length) { + sgtmp->dma_address += dma_base; + sgtmp++; + used--; + } + used = nelems - used; + + /* Step 4: Create the mappings. */ + prot = HV_PCI_MAP_ATTR_READ; + if (direction != PCI_DMA_TODEVICE) + prot |= HV_PCI_MAP_ATTR_WRITE; + + fill_sg(entry, devhandle, sglist, used, nelems, prot); + + return used; + +bad: + if (printk_ratelimit()) + WARN_ON(1); + return 0; } static void pci_4v_unmap_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, int direction) { + struct pcidev_cookie *pcp; + struct pci_iommu *iommu; + unsigned long flags, i, npages, devhandle; + long entry; + u32 bus_addr; + + if (unlikely(direction == PCI_DMA_NONE)) { + if (printk_ratelimit()) + WARN_ON(1); + } + + pcp = pdev->sysdata; + iommu = pcp->pbm->iommu; + devhandle = pcp->pbm->devhandle; + + bus_addr = sglist->dma_address & IO_PAGE_MASK; + + for (i = 1; i < nelems; i++) + if (sglist[i].dma_length == 0) + break; + i--; + npages = (IO_PAGE_ALIGN(sglist[i].dma_address + sglist[i].dma_length) - + bus_addr) >> IO_PAGE_SHIFT; + + entry = ((bus_addr - iommu->page_table_map_base) >> IO_PAGE_SHIFT); + + spin_lock_irqsave(&iommu->lock, flags); + + pci_arena_free(&iommu->arena, entry, npages); + + do { + unsigned long num; + + num = pci_sun4v_iommu_demap(devhandle, HV_PCI_TSBID(0, entry), + npages); + entry += num; + npages -= num; + } while (npages != 0); + + spin_unlock_irqrestore(&iommu->lock, flags); } static void pci_4v_dma_sync_single_for_cpu(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int direction) { + /* Nothing to do... */ } static void pci_4v_dma_sync_sg_for_cpu(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, int direction) { + /* Nothing to do... */ } struct pci_iommu_ops pci_sun4v_iommu_ops = { @@ -264,9 +707,83 @@ static void pbm_register_toplevel_resources(struct pci_controller_info *p, &pbm->mem_space); } +static void probe_existing_entries(struct pci_pbm_info *pbm, + struct pci_iommu *iommu) +{ + struct pci_iommu_arena *arena = &iommu->arena; + unsigned long i, devhandle; + + devhandle = pbm->devhandle; + for (i = 0; i < arena->limit; i++) { + unsigned long ret, io_attrs, ra; + + ret = pci_sun4v_iommu_getmap(devhandle, + HV_PCI_TSBID(0, i), + &io_attrs, &ra); + if (ret == HV_EOK) + __set_bit(i, arena->map); + } +} + static void pci_sun4v_iommu_init(struct pci_pbm_info *pbm) { - /* XXX Implement me! XXX */ + struct pci_iommu *iommu = pbm->iommu; + unsigned long num_tsb_entries, sz; + u32 vdma[2], dma_mask, dma_offset; + int err, tsbsize; + + err = prom_getproperty(pbm->prom_node, "virtual-dma", + (char *)&vdma[0], sizeof(vdma)); + if (err == 0 || err == -1) { + /* No property, use default values. */ + vdma[0] = 0x80000000; + vdma[1] = 0x80000000; + } + + dma_mask = vdma[0]; + switch (vdma[1]) { + case 0x20000000: + dma_mask |= 0x1fffffff; + tsbsize = 64; + break; + + case 0x40000000: + dma_mask |= 0x3fffffff; + tsbsize = 128; + break; + + case 0x80000000: + dma_mask |= 0x7fffffff; + tsbsize = 128; + break; + + default: + prom_printf("PCI-SUN4V: strange virtual-dma size.\n"); + prom_halt(); + }; + + num_tsb_entries = tsbsize / sizeof(iopte_t); + + dma_offset = vdma[0]; + + /* Setup initial software IOMMU state. */ + spin_lock_init(&iommu->lock); + iommu->ctx_lowest_free = 1; + iommu->page_table_map_base = dma_offset; + iommu->dma_addr_mask = dma_mask; + + /* Allocate and initialize the free area map. */ + sz = num_tsb_entries / 8; + sz = (sz + 7UL) & ~7UL; + iommu->arena.map = kmalloc(sz, GFP_KERNEL); + if (!iommu->arena.map) { + prom_printf("PCI_IOMMU: Error, kmalloc(arena.map) failed.\n"); + prom_halt(); + } + memset(iommu->arena.map, 0, sz); + iommu->arena.limit = num_tsb_entries; + + probe_existing_entries(pbm, iommu); } static void pci_sun4v_pbm_init(struct pci_controller_info *p, int prom_node) diff --git a/arch/sparc64/kernel/pci_sun4v.h b/arch/sparc64/kernel/pci_sun4v.h index 5c7ed2ca150..00322ed0cf8 100644 --- a/arch/sparc64/kernel/pci_sun4v.h +++ b/arch/sparc64/kernel/pci_sun4v.h @@ -16,6 +16,10 @@ extern unsigned long pci_sun4v_iommu_map(unsigned long devhandle, extern unsigned long pci_sun4v_iommu_demap(unsigned long devhandle, unsigned long tsbid, unsigned long num_ttes); +extern unsigned long pci_sun4v_iommu_getmap(unsigned long devhandle, + unsigned long tsbid, + unsigned long *io_attributes, + unsigned long *real_address); extern unsigned long pci_sun4v_config_get(unsigned long devhandle, unsigned long pci_device, unsigned long config_offset, diff --git a/arch/sparc64/kernel/pci_sun4v_asm.S b/arch/sparc64/kernel/pci_sun4v_asm.S index 2f1147146ab..4a12341dd5d 100644 --- a/arch/sparc64/kernel/pci_sun4v_asm.S +++ b/arch/sparc64/kernel/pci_sun4v_asm.S @@ -12,9 +12,7 @@ */ .globl pci_sun4v_devino_to_sysino pci_sun4v_devino_to_sysino: - mov %o1, %o2 - mov %o0, %o1 - mov HV_FAST_INTR_DEVINO2SYSINO, %o0 + mov HV_FAST_INTR_DEVINO2SYSINO, %o5 ta HV_FAST_TRAP retl mov %o1, %o0 @@ -29,12 +27,7 @@ pci_sun4v_devino_to_sysino: */ .globl pci_sun4v_iommu_map pci_sun4v_iommu_map: - mov %o4, %o5 - mov %o3, %o4 - mov %o2, %o3 - mov %o1, %o2 - mov %o0, %o1 - mov HV_FAST_PCI_IOMMU_MAP, %o0 + mov HV_FAST_PCI_IOMMU_MAP, %o5 ta HV_FAST_TRAP retl mov %o1, %o0 @@ -47,14 +40,28 @@ pci_sun4v_iommu_map: */ .globl pci_sun4v_iommu_demap pci_sun4v_iommu_demap: - mov %o2, %o3 - mov %o1, %o2 - mov %o0, %o1 - mov HV_FAST_PCI_IOMMU_DEMAP, %o0 + mov HV_FAST_PCI_IOMMU_DEMAP, %o5 ta HV_FAST_TRAP retl mov %o1, %o0 + /* %o0: devhandle + * %o1: tsbid + * %o2: &io_attributes + * %o3: &real_address + * + * returns %o0: status + */ + .globl pci_sun4v_iommu_getmap +pci_sun4v_iommu_getmap: + mov %o2, %o4 + mov HV_FAST_PCI_IOMMU_GETMAP, %o5 + ta HV_FAST_TRAP + stx %o1, [%o4] + stx %o2, [%o3] + retl + mov %o0, %o0 + /* %o0: devhandle * %o1: pci_device * %o2: pci_config_offset @@ -67,11 +74,7 @@ pci_sun4v_iommu_demap: */ .globl pci_sun4v_config_get pci_sun4v_config_get: - mov %o3, %o4 - mov %o2, %o3 - mov %o1, %o2 - mov %o0, %o1 - mov HV_FAST_PCI_CONFIG_GET, %o0 + mov HV_FAST_PCI_CONFIG_GET, %o5 ta HV_FAST_TRAP brnz,a,pn %o1, 1f mov -1, %o2 @@ -91,14 +94,9 @@ pci_sun4v_config_get: */ .globl pci_sun4v_config_put pci_sun4v_config_put: - mov %o3, %o4 - mov %o2, %o3 - mov %o1, %o2 - mov %o0, %o1 - mov HV_FAST_PCI_CONFIG_PUT, %o0 + mov HV_FAST_PCI_CONFIG_PUT, %o5 ta HV_FAST_TRAP brnz,a,pn %o1, 1f mov -1, %o1 1: retl mov %o1, %o0 - -- cgit v1.2.3-18-g5258 From 12eaa328f9fb2d3fcb5afb682c762690d05a3cd8 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 10 Feb 2006 15:39:51 -0800 Subject: [SPARC64]: Use ASI_SCRATCHPAD address 0x0 properly. This is where the virtual address of the fault status area belongs. To set it up we don't make a hypervisor call, instead we call OBP's SUNW,set-trap-table with the real address of the fault status area as the second argument. And right before that call we write the virtual address into ASI_SCRATCHPAD vaddr 0x0. Signed-off-by: David S. Miller --- arch/sparc64/kernel/head.S | 29 ++++++- arch/sparc64/kernel/sun4v_ivec.S | 28 ++---- arch/sparc64/kernel/sun4v_tlb_miss.S | 162 ++++++++++------------------------- arch/sparc64/kernel/trampoline.S | 29 ++++++- arch/sparc64/mm/init.c | 22 +---- arch/sparc64/prom/misc.c | 5 ++ 6 files changed, 113 insertions(+), 162 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/head.S b/arch/sparc64/kernel/head.S index d048f0dfd42..f581f0e917f 100644 --- a/arch/sparc64/kernel/head.S +++ b/arch/sparc64/kernel/head.S @@ -521,11 +521,36 @@ setup_trap_table: wrpr %g0, 15, %pil /* Make the firmware call to jump over to the Linux trap table. */ - call prom_set_trap_table + sethi %hi(is_sun4v), %o0 + lduw [%o0 + %lo(is_sun4v)], %o0 + brz,pt %o0, 1f + nop + + TRAP_LOAD_TRAP_BLOCK(%g2, %g3) + add %g2, TRAP_PER_CPU_FAULT_INFO, %g2 + stxa %g2, [%g0] ASI_SCRATCHPAD + + /* Compute physical address: + * + * paddr = kern_base + (mmfsa_vaddr - KERNBASE) + */ + sethi %hi(KERNBASE), %g3 + sub %g2, %g3, %g2 + sethi %hi(kern_base), %g3 + ldx [%g3 + %lo(kern_base)], %g3 + add %g2, %g3, %o1 + + call prom_set_trap_table_sun4v + sethi %hi(sparc64_ttable_tl0), %o0 + + ba,pt %xcc, 2f + nop + +1: call prom_set_trap_table sethi %hi(sparc64_ttable_tl0), %o0 /* Start using proper page size encodings in ctx register. */ - sethi %hi(sparc64_kern_pri_context), %g3 +2: sethi %hi(sparc64_kern_pri_context), %g3 ldx [%g3 + %lo(sparc64_kern_pri_context)], %g2 mov PRIMARY_CONTEXT, %g1 diff --git a/arch/sparc64/kernel/sun4v_ivec.S b/arch/sparc64/kernel/sun4v_ivec.S index d9d442017d3..c0367ef7e09 100644 --- a/arch/sparc64/kernel/sun4v_ivec.S +++ b/arch/sparc64/kernel/sun4v_ivec.S @@ -22,11 +22,8 @@ sun4v_cpu_mondo: nop /* Get &trap_block[smp_processor_id()] into %g3. */ - __GET_CPUID(%g1) - sethi %hi(trap_block), %g3 - sllx %g1, TRAP_BLOCK_SZ_SHIFT, %g7 - or %g3, %lo(trap_block), %g3 - add %g3, %g7, %g3 + ldxa [%g0] ASI_SCRATCHPAD, %g3 + sub %g3, TRAP_PER_CPU_FAULT_INFO, %g3 /* Get CPU mondo queue base phys address into %g7. */ ldx [%g3 + TRAP_PER_CPU_CPU_MONDO_PA], %g7 @@ -74,11 +71,8 @@ sun4v_dev_mondo: nop /* Get &trap_block[smp_processor_id()] into %g3. */ - __GET_CPUID(%g1) - sethi %hi(trap_block), %g3 - sllx %g1, TRAP_BLOCK_SZ_SHIFT, %g7 - or %g3, %lo(trap_block), %g3 - add %g3, %g7, %g3 + ldxa [%g0] ASI_SCRATCHPAD, %g3 + sub %g3, TRAP_PER_CPU_FAULT_INFO, %g3 /* Get DEV mondo queue base phys address into %g5. */ ldx [%g3 + TRAP_PER_CPU_DEV_MONDO_PA], %g5 @@ -143,11 +137,8 @@ sun4v_res_mondo: nop /* Get &trap_block[smp_processor_id()] into %g3. */ - __GET_CPUID(%g1) - sethi %hi(trap_block), %g3 - sllx %g1, TRAP_BLOCK_SZ_SHIFT, %g7 - or %g3, %lo(trap_block), %g3 - add %g3, %g7, %g3 + ldxa [%g0] ASI_SCRATCHPAD, %g3 + sub %g3, TRAP_PER_CPU_FAULT_INFO, %g3 /* Get RES mondo queue base phys address into %g5. */ ldx [%g3 + TRAP_PER_CPU_RESUM_MONDO_PA], %g5 @@ -251,11 +242,8 @@ sun4v_nonres_mondo: nop /* Get &trap_block[smp_processor_id()] into %g3. */ - __GET_CPUID(%g1) - sethi %hi(trap_block), %g3 - sllx %g1, TRAP_BLOCK_SZ_SHIFT, %g7 - or %g3, %lo(trap_block), %g3 - add %g3, %g7, %g3 + ldxa [%g0] ASI_SCRATCHPAD, %g3 + sub %g3, TRAP_PER_CPU_FAULT_INFO, %g3 /* Get RES mondo queue base phys address into %g5. */ ldx [%g3 + TRAP_PER_CPU_NONRESUM_MONDO_PA], %g5 diff --git a/arch/sparc64/kernel/sun4v_tlb_miss.S b/arch/sparc64/kernel/sun4v_tlb_miss.S index c408b05a5f0..f6222623de3 100644 --- a/arch/sparc64/kernel/sun4v_tlb_miss.S +++ b/arch/sparc64/kernel/sun4v_tlb_miss.S @@ -7,26 +7,20 @@ .align 32 sun4v_itlb_miss: - /* Load CPU ID into %g3. */ - mov SCRATCHPAD_CPUID, %g1 - ldxa [%g1] ASI_SCRATCHPAD, %g3 + /* Load MMU Miss base into %g2. */ + ldxa [%g0] ASI_SCRATCHPAD, %g3 /* Load UTSB reg into %g1. */ - ldxa [%g1 + %g1] ASI_SCRATCHPAD, %g1 - - /* Load &trap_block[smp_processor_id()] into %g2. */ - sethi %hi(trap_block), %g2 - or %g2, %lo(trap_block), %g2 - sllx %g3, TRAP_BLOCK_SZ_SHIFT, %g3 - add %g2, %g3, %g2 + mov SCRATCHPAD_UTSBREG1, %g1 + ldxa [%g1] ASI_SCRATCHPAD, %g1 /* Create a TAG TARGET, "(vaddr>>22) | (ctx << 48)", in %g6. * Branch if kernel TLB miss. The kernel TSB and user TSB miss * code wants the missing virtual address in %g4, so that value * cannot be modified through the entirety of this handler. */ - ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_I_ADDR_OFFSET], %g4 - ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_I_CTX_OFFSET], %g5 + ldx [%g2 + HV_FAULT_I_ADDR_OFFSET], %g4 + ldx [%g2 + HV_FAULT_I_CTX_OFFSET], %g5 srlx %g4, 22, %g3 sllx %g5, 48, %g6 or %g6, %g3, %g6 @@ -90,26 +84,20 @@ sun4v_itlb_load: retry sun4v_dtlb_miss: - /* Load CPU ID into %g3. */ - mov SCRATCHPAD_CPUID, %g1 - ldxa [%g1] ASI_SCRATCHPAD, %g3 + /* Load MMU Miss base into %g2. */ + ldxa [%g0] ASI_SCRATCHPAD, %g2 /* Load UTSB reg into %g1. */ + mov SCRATCHPAD_UTSBREG1, %g1 ldxa [%g1 + %g1] ASI_SCRATCHPAD, %g1 - /* Load &trap_block[smp_processor_id()] into %g2. */ - sethi %hi(trap_block), %g2 - or %g2, %lo(trap_block), %g2 - sllx %g3, TRAP_BLOCK_SZ_SHIFT, %g3 - add %g2, %g3, %g2 - /* Create a TAG TARGET, "(vaddr>>22) | (ctx << 48)", in %g6. * Branch if kernel TLB miss. The kernel TSB and user TSB miss * code wants the missing virtual address in %g4, so that value * cannot be modified through the entirety of this handler. */ - ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_D_ADDR_OFFSET], %g4 - ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_D_CTX_OFFSET], %g5 + ldx [%g2 + HV_FAULT_D_ADDR_OFFSET], %g4 + ldx [%g2 + HV_FAULT_D_CTX_OFFSET], %g5 srlx %g4, 22, %g3 sllx %g5, 48, %g6 or %g6, %g3, %g6 @@ -169,17 +157,10 @@ sun4v_dtlb_load: retry sun4v_dtlb_prot: - /* Load CPU ID into %g3. */ - mov SCRATCHPAD_CPUID, %g1 - ldxa [%g1] ASI_SCRATCHPAD, %g3 + /* Load MMU Miss base into %g2. */ + ldxa [%g0] ASI_SCRATCHPAD, %g2 - /* Load &trap_block[smp_processor_id()] into %g2. */ - sethi %hi(trap_block), %g2 - or %g2, %lo(trap_block), %g2 - sllx %g3, TRAP_BLOCK_SZ_SHIFT, %g3 - add %g2, %g3, %g2 - - ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_D_ADDR_OFFSET], %g5 + ldx [%g2 + HV_FAULT_D_ADDR_OFFSET], %g5 rdpr %tl, %g1 cmp %g1, 1 bgu,pn %xcc, winfix_trampoline @@ -187,35 +168,17 @@ sun4v_dtlb_prot: ba,pt %xcc, sparc64_realfault_common mov FAULT_CODE_DTLB | FAULT_CODE_WRITE, %g4 - /* Called from trap table with &trap_block[smp_processor_id()] in - * %g5 and SCRATCHPAD_UTSBREG1 contents in %g1. + /* Called from trap table with TAG TARGET placed into + * %g6 and SCRATCHPAD_UTSBREG1 contents in %g1. */ sun4v_itsb_miss: - ldx [%g5 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_I_ADDR_OFFSET], %g4 - ldx [%g5 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_I_CTX_OFFSET], %g5 - - srlx %g4, 22, %g7 - sllx %g5, 48, %g6 - or %g6, %g7, %g6 - brz,pn %g5, kvmap_itlb_4v - nop - ba,pt %xcc, sun4v_tsb_miss_common mov FAULT_CODE_ITLB, %g3 - /* Called from trap table with &trap_block[smp_processor_id()] in - * %g5 and SCRATCHPAD_UTSBREG1 contents in %g1. + /* Called from trap table with TAG TARGET placed into + * %g6 and SCRATCHPAD_UTSBREG1 contents in %g1. */ sun4v_dtsb_miss: - ldx [%g5 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_D_ADDR_OFFSET], %g4 - ldx [%g5 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_D_CTX_OFFSET], %g5 - - srlx %g4, 22, %g7 - sllx %g5, 48, %g6 - or %g6, %g7, %g6 - brz,pn %g5, kvmap_dtlb_4v - nop - mov FAULT_CODE_DTLB, %g3 /* Create TSB pointer into %g1. This is something like: @@ -239,15 +202,10 @@ sun4v_tsb_miss_common: /* Instruction Access Exception, tl0. */ sun4v_iacc: - mov SCRATCHPAD_CPUID, %g1 - ldxa [%g1] ASI_SCRATCHPAD, %g3 - sethi %hi(trap_block), %g2 - or %g2, %lo(trap_block), %g2 - sllx %g3, TRAP_BLOCK_SZ_SHIFT, %g3 - add %g2, %g3, %g2 - ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_I_TYPE_OFFSET], %g3 - ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_I_ADDR_OFFSET], %g4 - ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_I_CTX_OFFSET], %g5 + ldxa [%g0] ASI_SCRATCHPAD, %g2 + ldx [%g2 + HV_FAULT_I_TYPE_OFFSET], %g3 + ldx [%g2 + HV_FAULT_I_ADDR_OFFSET], %g4 + ldx [%g2 + HV_FAULT_I_CTX_OFFSET], %g5 sllx %g3, 16, %g3 or %g5, %g3, %g5 ba,pt %xcc, etrap @@ -260,15 +218,10 @@ sun4v_iacc: /* Instruction Access Exception, tl1. */ sun4v_iacc_tl1: - mov SCRATCHPAD_CPUID, %g1 - ldxa [%g1] ASI_SCRATCHPAD, %g3 - sethi %hi(trap_block), %g2 - or %g2, %lo(trap_block), %g2 - sllx %g3, TRAP_BLOCK_SZ_SHIFT, %g3 - add %g2, %g3, %g2 - ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_I_TYPE_OFFSET], %g3 - ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_I_ADDR_OFFSET], %g4 - ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_I_CTX_OFFSET], %g5 + ldxa [%g0] ASI_SCRATCHPAD, %g2 + ldx [%g2 + HV_FAULT_I_TYPE_OFFSET], %g3 + ldx [%g2 + HV_FAULT_I_ADDR_OFFSET], %g4 + ldx [%g2 + HV_FAULT_I_CTX_OFFSET], %g5 sllx %g3, 16, %g3 or %g5, %g3, %g5 ba,pt %xcc, etraptl1 @@ -281,15 +234,10 @@ sun4v_iacc_tl1: /* Data Access Exception, tl0. */ sun4v_dacc: - mov SCRATCHPAD_CPUID, %g1 - ldxa [%g1] ASI_SCRATCHPAD, %g3 - sethi %hi(trap_block), %g2 - or %g2, %lo(trap_block), %g2 - sllx %g3, TRAP_BLOCK_SZ_SHIFT, %g3 - add %g2, %g3, %g2 - ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_D_TYPE_OFFSET], %g3 - ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_D_ADDR_OFFSET], %g4 - ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_D_CTX_OFFSET], %g5 + ldxa [%g0] ASI_SCRATCHPAD, %g2 + ldx [%g2 + HV_FAULT_D_TYPE_OFFSET], %g3 + ldx [%g2 + HV_FAULT_D_ADDR_OFFSET], %g4 + ldx [%g2 + HV_FAULT_D_CTX_OFFSET], %g5 sllx %g3, 16, %g3 or %g5, %g3, %g5 ba,pt %xcc, etrap @@ -302,15 +250,10 @@ sun4v_dacc: /* Data Access Exception, tl1. */ sun4v_dacc_tl1: - mov SCRATCHPAD_CPUID, %g1 - ldxa [%g1] ASI_SCRATCHPAD, %g3 - sethi %hi(trap_block), %g2 - or %g2, %lo(trap_block), %g2 - sllx %g3, TRAP_BLOCK_SZ_SHIFT, %g3 - add %g2, %g3, %g2 - ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_D_TYPE_OFFSET], %g3 - ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_D_ADDR_OFFSET], %g4 - ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_D_CTX_OFFSET], %g5 + ldxa [%g0] ASI_SCRATCHPAD, %g2 + ldx [%g2 + HV_FAULT_D_TYPE_OFFSET], %g3 + ldx [%g2 + HV_FAULT_D_ADDR_OFFSET], %g4 + ldx [%g2 + HV_FAULT_D_CTX_OFFSET], %g5 sllx %g3, 16, %g3 or %g5, %g3, %g5 ba,pt %xcc, etraptl1 @@ -323,15 +266,10 @@ sun4v_dacc_tl1: /* Memory Address Unaligned. */ sun4v_mna: - mov SCRATCHPAD_CPUID, %g1 - ldxa [%g1] ASI_SCRATCHPAD, %g3 - sethi %hi(trap_block), %g2 - or %g2, %lo(trap_block), %g2 - sllx %g3, TRAP_BLOCK_SZ_SHIFT, %g3 - add %g2, %g3, %g2 + ldxa [%g0] ASI_SCRATCHPAD, %g2 mov HV_FAULT_TYPE_UNALIGNED, %g3 - ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_D_ADDR_OFFSET], %g4 - ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_D_CTX_OFFSET], %g5 + ldx [%g2 + HV_FAULT_D_ADDR_OFFSET], %g4 + ldx [%g2 + HV_FAULT_D_CTX_OFFSET], %g5 sllx %g3, 16, %g3 or %g5, %g3, %g5 @@ -359,15 +297,10 @@ sun4v_privact: /* Unaligned ldd float, tl0. */ sun4v_lddfmna: - mov SCRATCHPAD_CPUID, %g1 - ldxa [%g1] ASI_SCRATCHPAD, %g3 - sethi %hi(trap_block), %g2 - or %g2, %lo(trap_block), %g2 - sllx %g3, TRAP_BLOCK_SZ_SHIFT, %g3 - add %g2, %g3, %g2 - ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_D_TYPE_OFFSET], %g3 - ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_D_ADDR_OFFSET], %g4 - ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_D_CTX_OFFSET], %g5 + ldxa [%g0] ASI_SCRATCHPAD, %g2 + ldx [%g2 + HV_FAULT_D_TYPE_OFFSET], %g3 + ldx [%g2 + HV_FAULT_D_ADDR_OFFSET], %g4 + ldx [%g2 + HV_FAULT_D_CTX_OFFSET], %g5 sllx %g3, 16, %g3 or %g5, %g3, %g5 ba,pt %xcc, etrap @@ -380,15 +313,10 @@ sun4v_lddfmna: /* Unaligned std float, tl0. */ sun4v_stdfmna: - mov SCRATCHPAD_CPUID, %g1 - ldxa [%g1] ASI_SCRATCHPAD, %g3 - sethi %hi(trap_block), %g2 - or %g2, %lo(trap_block), %g2 - sllx %g3, TRAP_BLOCK_SZ_SHIFT, %g3 - add %g2, %g3, %g2 - ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_D_TYPE_OFFSET], %g3 - ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_D_ADDR_OFFSET], %g4 - ldx [%g2 + TRAP_PER_CPU_FAULT_INFO + HV_FAULT_D_CTX_OFFSET], %g5 + ldxa [%g0] ASI_SCRATCHPAD, %g2 + ldx [%g2 + HV_FAULT_D_TYPE_OFFSET], %g3 + ldx [%g2 + HV_FAULT_D_ADDR_OFFSET], %g4 + ldx [%g2 + HV_FAULT_D_CTX_OFFSET], %g5 sllx %g3, 16, %g3 or %g5, %g3, %g5 ba,pt %xcc, etrap diff --git a/arch/sparc64/kernel/trampoline.S b/arch/sparc64/kernel/trampoline.S index c476f5b321f..88382200c7b 100644 --- a/arch/sparc64/kernel/trampoline.S +++ b/arch/sparc64/kernel/trampoline.S @@ -389,10 +389,35 @@ after_lock_tlb: or %o1, PSTATE_IE, %o1 wrpr %o1, 0, %pstate - call prom_set_trap_table + sethi %hi(is_sun4v), %o0 + lduw [%o0 + %lo(is_sun4v)], %o0 + brz,pt %o0, 1f + nop + + TRAP_LOAD_TRAP_BLOCK(%g2, %g3) + add %g2, TRAP_PER_CPU_FAULT_INFO, %g2 + stxa %g2, [%g0] ASI_SCRATCHPAD + + /* Compute physical address: + * + * paddr = kern_base + (mmfsa_vaddr - KERNBASE) + */ + sethi %hi(KERNBASE), %g3 + sub %g2, %g3, %g2 + sethi %hi(kern_base), %g3 + ldx [%g3 + %lo(kern_base)], %g3 + add %g2, %g3, %o1 + + call prom_set_trap_table_sun4v + sethi %hi(sparc64_ttable_tl0), %o0 + + ba,pt %xcc, 2f + nop + +1: call prom_set_trap_table sethi %hi(sparc64_ttable_tl0), %o0 - call smp_callin +2: call smp_callin nop call cpu_idle mov 0, %o0 diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 7faba33202a..88eb6f6be56 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -1109,24 +1109,6 @@ static void __init tsb_phys_patch(void) } } -/* Register this cpu's fault status area with the hypervisor. */ -void __cpuinit sun4v_register_fault_status(void) -{ - register unsigned long func asm("%o5"); - register unsigned long arg0 asm("%o0"); - int cpu = hard_smp_processor_id(); - struct trap_per_cpu *tb = &trap_block[cpu]; - unsigned long pa; - - pa = kern_base + ((unsigned long) tb - KERNBASE); - func = HV_FAST_MMU_FAULT_AREA_CONF; - arg0 = pa; - __asm__ __volatile__("ta %4" - : "=&r" (func), "=&r" (arg0) - : "0" (func), "1" (arg0), - "i" (HV_FAST_TRAP)); -} - /* paging_init() sets up the page tables */ extern void cheetah_ecache_flush_init(void); @@ -1147,10 +1129,8 @@ void __init paging_init(void) tlb_type == hypervisor) tsb_phys_patch(); - if (tlb_type == hypervisor) { + if (tlb_type == hypervisor) sun4v_patch_tlb_handlers(); - sun4v_register_fault_status(); - } /* Find available physical memory... */ read_obp_memory("available", &pavail[0], &pavail_ents); diff --git a/arch/sparc64/prom/misc.c b/arch/sparc64/prom/misc.c index 87f5cfce23b..713cbac5f9b 100644 --- a/arch/sparc64/prom/misc.c +++ b/arch/sparc64/prom/misc.c @@ -136,6 +136,11 @@ void prom_set_trap_table(unsigned long tba) p1275_cmd("SUNW,set-trap-table", P1275_INOUT(1, 0), tba); } +void prom_set_trap_table_sun4v(unsigned long tba, unsigned long mmfsa) +{ + p1275_cmd("SUNW,set-trap-table", P1275_INOUT(2, 0), tba, mmfsa); +} + int prom_get_mmu_ihandle(void) { int node, ret; -- cgit v1.2.3-18-g5258 From 36a68e77c554f1ef1c206fd618e6daf82d3e38a3 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 11 Feb 2006 00:29:34 -0800 Subject: [SPARC64]: Simplify sun4v TLB handling using macros. There was also a bug in sun4v_itlb_miss, it loaded the MMU Fault Status base into %g3 instead of %g2. This pointed out a fast path for TSB miss processing, since we have %g2 with the MMU Fault Status base, we can use that to quickly load up the PGD phys address. Signed-off-by: David S. Miller --- arch/sparc64/kernel/sun4v_tlb_miss.S | 130 ++++++++++++++--------------------- arch/sparc64/kernel/tsb.S | 18 +++-- 2 files changed, 61 insertions(+), 87 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/sun4v_tlb_miss.S b/arch/sparc64/kernel/sun4v_tlb_miss.S index f6222623de3..f7129137f9a 100644 --- a/arch/sparc64/kernel/sun4v_tlb_miss.S +++ b/arch/sparc64/kernel/sun4v_tlb_miss.S @@ -6,48 +6,55 @@ .text .align 32 -sun4v_itlb_miss: - /* Load MMU Miss base into %g2. */ - ldxa [%g0] ASI_SCRATCHPAD, %g3 - - /* Load UTSB reg into %g1. */ - mov SCRATCHPAD_UTSBREG1, %g1 - ldxa [%g1] ASI_SCRATCHPAD, %g1 + /* Load ITLB fault information into VADDR and CTX, using BASE. */ +#define LOAD_ITLB_INFO(BASE, VADDR, CTX) \ + ldx [BASE + HV_FAULT_I_ADDR_OFFSET], VADDR; \ + ldx [BASE + HV_FAULT_I_CTX_OFFSET], CTX; + + /* Load DTLB fault information into VADDR and CTX, using BASE. */ +#define LOAD_DTLB_INFO(BASE, VADDR, CTX) \ + ldx [BASE + HV_FAULT_D_ADDR_OFFSET], VADDR; \ + ldx [BASE + HV_FAULT_D_CTX_OFFSET], CTX; - /* Create a TAG TARGET, "(vaddr>>22) | (ctx << 48)", in %g6. - * Branch if kernel TLB miss. The kernel TSB and user TSB miss - * code wants the missing virtual address in %g4, so that value - * cannot be modified through the entirety of this handler. + /* DEST = (CTX << 48) | (VADDR >> 22) + * + * Branch to ZERO_CTX_LABEL is context is zero. */ - ldx [%g2 + HV_FAULT_I_ADDR_OFFSET], %g4 - ldx [%g2 + HV_FAULT_I_CTX_OFFSET], %g5 - srlx %g4, 22, %g3 - sllx %g5, 48, %g6 - or %g6, %g3, %g6 - brz,pn %g5, kvmap_itlb_4v - nop +#define COMPUTE_TAG_TARGET(DEST, VADDR, CTX, TMP, ZERO_CTX_LABEL) \ + srlx VADDR, 22, TMP; \ + sllx CTX, 48, DEST; \ + brz,pn CTX, ZERO_CTX_LABEL; \ + or DEST, TMP, DEST; /* Create TSB pointer. This is something like: * * index_mask = (512 << (tsb_reg & 0x7UL)) - 1UL; * tsb_base = tsb_reg & ~0x7UL; - */ - and %g1, 0x7, %g3 - andn %g1, 0x7, %g1 - mov 512, %g7 - sllx %g7, %g3, %g7 - sub %g7, 1, %g7 - - /* TSB index mask is in %g7, tsb base is in %g1. Compute - * the TSB entry pointer into %g1: - * * tsb_index = ((vaddr >> PAGE_SHIFT) & tsb_mask); * tsb_ptr = tsb_base + (tsb_index * 16); */ - srlx %g4, PAGE_SHIFT, %g3 - and %g3, %g7, %g3 - sllx %g3, 4, %g3 - add %g1, %g3, %g1 +#define COMPUTE_TSB_PTR(TSB_PTR, VADDR, TMP1, TMP2) \ + and TSB_PTR, 0x7, TMP1; \ + mov 512, TMP2; \ + andn TSB_PTR, 0x7, TSB_PTR; \ + sllx TMP2, TMP1, TMP2; \ + srlx VADDR, PAGE_SHIFT, TMP1; \ + sub TMP2, 1, TMP2; \ + and TMP1, TMP2, TMP1; \ + sllx TMP1, 4, TMP1; \ + add TSB_PTR, TMP1, TSB_PTR; + +sun4v_itlb_miss: + /* Load MMU Miss base into %g2. */ + ldxa [%g0] ASI_SCRATCHPAD, %g2 + + /* Load UTSB reg into %g1. */ + mov SCRATCHPAD_UTSBREG1, %g1 + ldxa [%g1] ASI_SCRATCHPAD, %g1 + + LOAD_ITLB_INFO(%g2, %g4, %g5) + COMPUTE_TAG_TARGET(%g6, %g4, %g5, %g3, kvmap_itlb_4v) + COMPUTE_TSB_PTR(%g1, %g4, %g3, %g7) /* Load TSB tag/pte into %g2/%g3 and compare the tag. */ ldda [%g1] ASI_QUAD_LDD_PHYS, %g2 @@ -91,40 +98,9 @@ sun4v_dtlb_miss: mov SCRATCHPAD_UTSBREG1, %g1 ldxa [%g1 + %g1] ASI_SCRATCHPAD, %g1 - /* Create a TAG TARGET, "(vaddr>>22) | (ctx << 48)", in %g6. - * Branch if kernel TLB miss. The kernel TSB and user TSB miss - * code wants the missing virtual address in %g4, so that value - * cannot be modified through the entirety of this handler. - */ - ldx [%g2 + HV_FAULT_D_ADDR_OFFSET], %g4 - ldx [%g2 + HV_FAULT_D_CTX_OFFSET], %g5 - srlx %g4, 22, %g3 - sllx %g5, 48, %g6 - or %g6, %g3, %g6 - brz,pn %g5, kvmap_dtlb_4v - nop - - /* Create TSB pointer. This is something like: - * - * index_mask = (512 << (tsb_reg & 0x7UL)) - 1UL; - * tsb_base = tsb_reg & ~0x7UL; - */ - and %g1, 0x7, %g3 - andn %g1, 0x7, %g1 - mov 512, %g7 - sllx %g7, %g3, %g7 - sub %g7, 1, %g7 - - /* TSB index mask is in %g7, tsb base is in %g1. Compute - * the TSB entry pointer into %g1: - * - * tsb_index = ((vaddr >> PAGE_SHIFT) & tsb_mask); - * tsb_ptr = tsb_base + (tsb_index * 16); - */ - srlx %g4, PAGE_SHIFT, %g3 - and %g3, %g7, %g3 - sllx %g3, 4, %g3 - add %g1, %g3, %g1 + LOAD_DTLB_INFO(%g2, %g4, %g5) + COMPUTE_TAG_TARGET(%g6, %g4, %g5, %g3, kvmap_dtlb_4v) + COMPUTE_TSB_PTR(%g1, %g4, %g3, %g7) /* Load TSB tag/pte into %g2/%g3 and compare the tag. */ ldda [%g1] ASI_QUAD_LDD_PHYS, %g2 @@ -169,7 +145,8 @@ sun4v_dtlb_prot: mov FAULT_CODE_DTLB | FAULT_CODE_WRITE, %g4 /* Called from trap table with TAG TARGET placed into - * %g6 and SCRATCHPAD_UTSBREG1 contents in %g1. + * %g6, SCRATCHPAD_UTSBREG1 contents in %g1, and + * SCRATCHPAD_MMU_MISS contents in %g2. */ sun4v_itsb_miss: ba,pt %xcc, sun4v_tsb_miss_common @@ -189,16 +166,15 @@ sun4v_dtsb_miss: * tsb_ptr = tsb_base + (tsb_index * 16); */ sun4v_tsb_miss_common: - and %g1, 0x7, %g2 - andn %g1, 0x7, %g1 - mov 512, %g7 - sllx %g7, %g2, %g7 - sub %g7, 1, %g7 - srlx %g4, PAGE_SHIFT, %g2 - and %g2, %g7, %g2 - sllx %g2, 4, %g2 - ba,pt %xcc, tsb_miss_page_table_walk - add %g1, %g2, %g1 + COMPUTE_TSB_PTR(%g1, %g4, %g5, %g7) + + /* Branch directly to page table lookup. We have SCRATCHPAD_MMU_MISS + * still in %g2, so it's quite trivial to get at the PGD PHYS value + * so we can preload it into %g7. + */ + sub %g2, TRAP_PER_CPU_FAULT_INFO, %g2 + ba,pt %xcc, tsb_miss_page_table_walk_sun4v_fastpath + ldx [%g2 + TRAP_PER_CPU_PGD_PADDR], %g7 /* Instruction Access Exception, tl0. */ sun4v_iacc: diff --git a/arch/sparc64/kernel/tsb.S b/arch/sparc64/kernel/tsb.S index 8a9351258af..667dcb077be 100644 --- a/arch/sparc64/kernel/tsb.S +++ b/arch/sparc64/kernel/tsb.S @@ -25,26 +25,24 @@ */ tsb_miss_dtlb: mov TLB_TAG_ACCESS, %g4 - ldxa [%g4] ASI_DMMU, %g4 ba,pt %xcc, tsb_miss_page_table_walk - nop + ldxa [%g4] ASI_DMMU, %g4 tsb_miss_itlb: mov TLB_TAG_ACCESS, %g4 - ldxa [%g4] ASI_IMMU, %g4 ba,pt %xcc, tsb_miss_page_table_walk - nop + ldxa [%g4] ASI_IMMU, %g4 - /* The sun4v TLB miss handlers jump directly here instead - * of tsb_miss_{d,i}tlb with registers setup as follows: - * - * %g4: missing virtual address - * %g1: TSB entry address loaded - * %g6: TAG TARGET ((vaddr >> 22) | (ctx << 48)) + /* At this point we have: + * %g4 -- missing virtual address + * %g1 -- TSB entry address + * %g6 -- TAG TARGET ((vaddr >> 22) | (ctx << 48)) */ tsb_miss_page_table_walk: TRAP_LOAD_PGD_PHYS(%g7, %g5) + /* And now we have the PGD base physical address in %g7. */ +tsb_miss_page_table_walk_sun4v_fastpath: USER_PGTABLE_WALK_TL1(%g4, %g7, %g5, %g2, tsb_do_fault) tsb_reload: -- cgit v1.2.3-18-g5258 From 4bdff41464c2954c6f62f849df0e73eb9fa21c65 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 11 Feb 2006 01:01:55 -0800 Subject: [SPARC64]: Fetch bootup time of day from Hypervisor. Signed-off-by: David S. Miller --- arch/sparc64/kernel/time.c | 58 +++++++++++++++++++++++++++++++++++++++------- 1 file changed, 50 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c index a22930d62ad..24681b9b442 100644 --- a/arch/sparc64/kernel/time.c +++ b/arch/sparc64/kernel/time.c @@ -683,6 +683,48 @@ static void __init set_system_time(void) } } +/* davem suggests we keep this within the 4M locked kernel image */ +static u32 starfire_get_time(void) +{ + static char obp_gettod[32]; + static u32 unix_tod; + + sprintf(obp_gettod, "h# %08x unix-gettod", + (unsigned int) (long) &unix_tod); + prom_feval(obp_gettod); + + return unix_tod; +} + +static u32 hypervisor_get_time(void) +{ + register unsigned long func asm("%o5"); + register unsigned long arg0 asm("%o0"); + register unsigned long arg1 asm("%o1"); + int retries = 10000; + +retry: + func = HV_FAST_TOD_GET; + arg0 = 0; + arg1 = 0; + __asm__ __volatile__("ta %6" + : "=&r" (func), "=&r" (arg0), "=&r" (arg1) + : "0" (func), "1" (arg0), "2" (arg1), + "i" (HV_FAST_TRAP)); + if (arg0 == HV_EOK) + return arg1; + if (arg0 == HV_EWOULDBLOCK) { + if (--retries > 0) { + udelay(100); + goto retry; + } + printk(KERN_WARNING "SUN4V: tod_get() timed out.\n"); + return 0; + } + printk(KERN_WARNING "SUN4V: tod_get() not supported.\n"); + return 0; +} + void __init clock_probe(void) { struct linux_prom_registers clk_reg[2]; @@ -702,14 +744,14 @@ void __init clock_probe(void) if (this_is_starfire) { - /* davem suggests we keep this within the 4M locked kernel image */ - static char obp_gettod[256]; - static u32 unix_tod; - - sprintf(obp_gettod, "h# %08x unix-gettod", - (unsigned int) (long) &unix_tod); - prom_feval(obp_gettod); - xtime.tv_sec = unix_tod; + xtime.tv_sec = starfire_get_time(); + xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ); + set_normalized_timespec(&wall_to_monotonic, + -xtime.tv_sec, -xtime.tv_nsec); + return; + } + if (tlb_type == hypervisor) { + xtime.tv_sec = hypervisor_get_time(); xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ); set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec); -- cgit v1.2.3-18-g5258 From e92b92571c85dfa1cdc56e88566134c51ae1d12b Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 11 Feb 2006 10:19:37 -0800 Subject: [SPARC64]: Handle hypervisor case correctly in copy_tsb(). Signed-off-by: David S. Miller --- arch/sparc64/mm/tsb.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/mm/tsb.c b/arch/sparc64/mm/tsb.c index 6ae2a5a702c..c5dc4b0cc1c 100644 --- a/arch/sparc64/mm/tsb.c +++ b/arch/sparc64/mm/tsb.c @@ -231,7 +231,13 @@ static void copy_tsb(struct tsb *old_tsb, unsigned long old_size, register unsigned long pte asm("o5"); unsigned long v, hash; - if (tlb_type == cheetah_plus) { + if (tlb_type == hypervisor) { + __asm__ __volatile__( + "ldda [%2] %3, %0" + : "=r" (tag), "=r" (pte) + : "r" (__pa(&old_tsb[i])), + "i" (ASI_QUAD_LDD_PHYS_4V)); + } else if (tlb_type == cheetah_plus) { __asm__ __volatile__( "ldda [%2] %3, %0" : "=r" (tag), "=r" (pte) @@ -267,7 +273,8 @@ static void copy_tsb(struct tsb *old_tsb, unsigned long old_size, v |= (i & (512UL - 1UL)) << 13UL; hash = tsb_hash(v, new_nentries); - if (tlb_type == cheetah_plus) { + if (tlb_type == cheetah_plus || + tlb_type == hypervisor) { __asm__ __volatile__( "stxa %0, [%1] %2\n\t" "stxa %3, [%4] %2" -- cgit v1.2.3-18-g5258 From 0d4bc95b9c205a7374afbe93b38d9c2757a45862 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 11 Feb 2006 10:30:41 -0800 Subject: [SPARC64]: Fix some Niagara memcpy() bugs. We need to restore the %asi register properly. For the kernel this means get_fs(), for user this means ASI_PNF. Also, NGcopy_to_user.S was including U3memcpy.S instead of NGmemcpy.S, oops :-) Signed-off-by: David S. Miller --- arch/sparc64/lib/NGcopy_to_user.S | 2 +- arch/sparc64/lib/NGmemcpy.S | 10 +++++++--- 2 files changed, 8 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/lib/NGcopy_to_user.S b/arch/sparc64/lib/NGcopy_to_user.S index 4a12395b450..34112d5054e 100644 --- a/arch/sparc64/lib/NGcopy_to_user.S +++ b/arch/sparc64/lib/NGcopy_to_user.S @@ -37,4 +37,4 @@ nop #endif -#include "U3memcpy.S" +#include "NGmemcpy.S" diff --git a/arch/sparc64/lib/NGmemcpy.S b/arch/sparc64/lib/NGmemcpy.S index a39aa3bd434..8e522b3dc09 100644 --- a/arch/sparc64/lib/NGmemcpy.S +++ b/arch/sparc64/lib/NGmemcpy.S @@ -5,11 +5,15 @@ #ifdef __KERNEL__ #include +#include #define GLOBAL_SPARE %g7 -#define RESTORE_ASI wr %g0, ASI_AIUS, %asi +#define RESTORE_ASI(TMP) \ + ldub [%g6 + TI_CURRENT_DS], TMP; \ + wr TMP, 0x0, %asi; #else #define GLOBAL_SPARE %g5 -#define RESTORE_ASI +#define RESTORE_ASI(TMP) \ + wr %g0, ASI_PNF, %asi #endif #ifndef STORE_ASI @@ -246,7 +250,7 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ /* %o2 contains any final bytes still needed to be copied * over. If anything is left, we copy it one byte at a time. */ - RESTORE_ASI + RESTORE_ASI(%o3) brz,pt %o2, 85f sub %o0, %o1, %o3 ba,a,pt %XCC, 90f -- cgit v1.2.3-18-g5258 From 6cebb52094baddd4c167bb5100a7cf6f7bee6910 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 11 Feb 2006 10:56:43 -0800 Subject: [SPARC64]: Fix sun4v early bootup. prom_sun4v_name should be "sun4v" not "SUNW,sun4v" Also, this is too early to make use of the .sun4v_Xinsn_patch code patching, so just check things manually. This gets us at least to prom_init() on Niagara. Signed-off-by: David S. Miller --- arch/sparc64/kernel/head.S | 35 ++++++++++++++++++++--------------- 1 file changed, 20 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/head.S b/arch/sparc64/kernel/head.S index f581f0e917f..3222c8205b5 100644 --- a/arch/sparc64/kernel/head.S +++ b/arch/sparc64/kernel/head.S @@ -123,7 +123,7 @@ prom_map_name: prom_unmap_name: .asciz "unmap" prom_sun4v_name: - .asciz "SUNW,sun4v" + .asciz "sun4v" .align 4 prom_root_compatible: .skip 64 @@ -300,7 +300,7 @@ sparc64_boot_after_remap: or %g1, %lo(prom_root_compatible), %g1 sethi %hi(prom_sun4v_name), %g7 or %g7, %lo(prom_sun4v_name), %g7 - mov 10, %g3 + mov 5, %g3 1: ldub [%g7], %g2 ldub [%g1], %g4 cmp %g2, %g4 @@ -380,28 +380,33 @@ jump_to_sun4u_init: nop sun4u_init: + BRANCH_IF_SUN4V(g1, sun4v_init) + /* Set ctx 0 */ mov PRIMARY_CONTEXT, %g7 - -661: stxa %g0, [%g7] ASI_DMMU - .section .sun4v_1insn_patch, "ax" - .word 661b - stxa %g0, [%g7] ASI_MMU - .previous - + stxa %g0, [%g7] ASI_DMMU membar #Sync mov SECONDARY_CONTEXT, %g7 + stxa %g0, [%g7] ASI_DMMU + membar #Sync -661: stxa %g0, [%g7] ASI_DMMU - .section .sun4v_1insn_patch, "ax" - .word 661b + ba,pt %xcc, sun4u_continue + nop + +sun4v_init: + /* Set ctx 0 */ + mov PRIMARY_CONTEXT, %g7 stxa %g0, [%g7] ASI_MMU - .previous + membar #Sync - membar #Sync + mov SECONDARY_CONTEXT, %g7 + stxa %g0, [%g7] ASI_MMU + membar #Sync + ba,pt %xcc, niagara_tlb_fixup + nop - BRANCH_IF_SUN4V(g1, niagara_tlb_fixup) +sun4u_continue: BRANCH_IF_ANY_CHEETAH(g1, g7, cheetah_tlb_fixup) ba,pt %xcc, spitfire_tlb_fixup -- cgit v1.2.3-18-g5258 From fd05068d7b22b64211f9202aa67ad44b51d44242 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 11 Feb 2006 11:05:52 -0800 Subject: [SPARC64]: Fix typo in sun4v_patch(). Second instruction offset is '4' not '3'. Signed-off-by: David S. Miller --- arch/sparc64/kernel/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index cec921f6cdb..f36b257b2e4 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -583,7 +583,7 @@ static void __init sun4v_patch(void) wmb(); __asm__ __volatile__("flush %0" : : "r" (addr + 0)); - *(unsigned int *) (addr + 3) = p2->insns[1]; + *(unsigned int *) (addr + 4) = p2->insns[1]; wmb(); __asm__ __volatile__("flush %0" : : "r" (addr + 4)); -- cgit v1.2.3-18-g5258 From 459b6e621e0e15315c25bac47fa7113e5818d45d Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 11 Feb 2006 12:21:20 -0800 Subject: [SPARC64]: Fix some SUN4V TLB miss bugs. Code patching did not sign extend negative branch offsets correctly. Kernel TLB miss path needs patching and %g4 register preservation in order to handle SUN4V correctly. Signed-off-by: David S. Miller --- arch/sparc64/kernel/ktlb.S | 67 +++++++++++++++++++++++++++++++----- arch/sparc64/kernel/sun4v_tlb_miss.S | 14 +++++--- 2 files changed, 68 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/ktlb.S b/arch/sparc64/kernel/ktlb.S index f6bb2e08964..2d333ab4b91 100644 --- a/arch/sparc64/kernel/ktlb.S +++ b/arch/sparc64/kernel/ktlb.S @@ -48,7 +48,7 @@ kvmap_itlb_tsb_miss: kvmap_itlb_vmalloc_addr: KERN_PGTABLE_WALK(%g4, %g5, %g2, kvmap_itlb_longpath) - KTSB_LOCK_TAG(%g1, %g2, %g4) + KTSB_LOCK_TAG(%g1, %g2, %g7) /* Load and check PTE. */ ldxa [%g5] ASI_PHYS_USE_EC, %g5 @@ -60,8 +60,29 @@ kvmap_itlb_vmalloc_addr: /* fallthrough to TLB load */ kvmap_itlb_load: - stxa %g5, [%g0] ASI_ITLB_DATA_IN ! Reload TLB + +661: stxa %g5, [%g0] ASI_ITLB_DATA_IN retry + .section .sun4v_2insn_patch, "ax" + .word 661b + nop + nop + .previous + + /* For sun4v the ASI_ITLB_DATA_IN store and the retry + * instruction get nop'd out and we get here to branch + * to the sun4v tlb load code. The registers are setup + * as follows: + * + * %g4: vaddr + * %g5: PTE + * %g6: TAG + * + * The sun4v TLB load wants the PTE in %g3 so we fix that + * up here. + */ + ba,pt %xcc, sun4v_itlb_load + mov %g5, %g3 kvmap_itlb_longpath: @@ -80,7 +101,7 @@ kvmap_itlb_longpath: kvmap_itlb_obp: OBP_TRANS_LOOKUP(%g4, %g5, %g2, %g3, kvmap_itlb_longpath) - KTSB_LOCK_TAG(%g1, %g2, %g4) + KTSB_LOCK_TAG(%g1, %g2, %g7) KTSB_WRITE(%g1, %g5, %g6) @@ -90,7 +111,7 @@ kvmap_itlb_obp: kvmap_dtlb_obp: OBP_TRANS_LOOKUP(%g4, %g5, %g2, %g3, kvmap_dtlb_longpath) - KTSB_LOCK_TAG(%g1, %g2, %g4) + KTSB_LOCK_TAG(%g1, %g2, %g7) KTSB_WRITE(%g1, %g5, %g6) @@ -129,7 +150,7 @@ kvmap_linear_patch: kvmap_dtlb_vmalloc_addr: KERN_PGTABLE_WALK(%g4, %g5, %g2, kvmap_dtlb_longpath) - KTSB_LOCK_TAG(%g1, %g2, %g4) + KTSB_LOCK_TAG(%g1, %g2, %g7) /* Load and check PTE. */ ldxa [%g5] ASI_PHYS_USE_EC, %g5 @@ -141,8 +162,29 @@ kvmap_dtlb_vmalloc_addr: /* fallthrough to TLB load */ kvmap_dtlb_load: - stxa %g5, [%g0] ASI_DTLB_DATA_IN ! Reload TLB + +661: stxa %g5, [%g0] ASI_DTLB_DATA_IN ! Reload TLB retry + .section .sun4v_2insn_patch, "ax" + .word 661b + nop + nop + .previous + + /* For sun4v the ASI_DTLB_DATA_IN store and the retry + * instruction get nop'd out and we get here to branch + * to the sun4v tlb load code. The registers are setup + * as follows: + * + * %g4: vaddr + * %g5: PTE + * %g6: TAG + * + * The sun4v TLB load wants the PTE in %g3 so we fix that + * up here. + */ + ba,pt %xcc, sun4v_dtlb_load + mov %g5, %g3 kvmap_dtlb_nonlinear: /* Catch kernel NULL pointer derefs. */ @@ -185,10 +227,17 @@ kvmap_dtlb_longpath: nop .previous - rdpr %tl, %g4 - cmp %g4, 1 - mov TLB_TAG_ACCESS, %g4 + rdpr %tl, %g3 + cmp %g3, 1 + +661: mov TLB_TAG_ACCESS, %g4 ldxa [%g4] ASI_DMMU, %g5 + .section .sun4v_2insn_patch, "ax" + .word 661b + mov %g4, %g5 + nop + .previous + be,pt %xcc, sparc64_realfault_common mov FAULT_CODE_DTLB, %g4 ba,pt %xcc, winfix_trampoline diff --git a/arch/sparc64/kernel/sun4v_tlb_miss.S b/arch/sparc64/kernel/sun4v_tlb_miss.S index f7129137f9a..597359ced23 100644 --- a/arch/sparc64/kernel/sun4v_tlb_miss.S +++ b/arch/sparc64/kernel/sun4v_tlb_miss.S @@ -96,7 +96,7 @@ sun4v_dtlb_miss: /* Load UTSB reg into %g1. */ mov SCRATCHPAD_UTSBREG1, %g1 - ldxa [%g1 + %g1] ASI_SCRATCHPAD, %g1 + ldxa [%g1] ASI_SCRATCHPAD, %g1 LOAD_DTLB_INFO(%g2, %g4, %g5) COMPUTE_TAG_TARGET(%g6, %g4, %g5, %g3, kvmap_dtlb_4v) @@ -149,14 +149,19 @@ sun4v_dtlb_prot: * SCRATCHPAD_MMU_MISS contents in %g2. */ sun4v_itsb_miss: - ba,pt %xcc, sun4v_tsb_miss_common + mov SCRATCHPAD_UTSBREG1, %g1 + ldxa [%g1] ASI_SCRATCHPAD, %g1 + brz,pn %g5, kvmap_itlb_4v mov FAULT_CODE_ITLB, %g3 /* Called from trap table with TAG TARGET placed into * %g6 and SCRATCHPAD_UTSBREG1 contents in %g1. */ sun4v_dtsb_miss: - mov FAULT_CODE_DTLB, %g3 + mov SCRATCHPAD_UTSBREG1, %g1 + ldxa [%g1] ASI_SCRATCHPAD, %g1 + brz,pn %g5, kvmap_dtlb_4v + mov FAULT_CODE_DTLB, %g3 /* Create TSB pointer into %g1. This is something like: * @@ -312,7 +317,8 @@ sun4v_stdfmna: or %g2, %lo(OLD), %g2; \ sub %g1, %g2, %g1; \ sethi %hi(BRANCH_ALWAYS), %g3; \ - srl %g1, 2, %g1; \ + sll %g1, 11, %g1; \ + srl %g1, 11 + 2, %g1; \ or %g3, %lo(BRANCH_ALWAYS), %g3; \ or %g3, %g1, %g3; \ stw %g3, [%g2]; \ -- cgit v1.2.3-18-g5258 From 490384e752a43aa281ed533e9de2da36df25c337 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 11 Feb 2006 14:41:18 -0800 Subject: [SPARC64]: Register kernel TSB with hypervisor. We do this right after we take over the trap table from OBP. Signed-off-by: David S. Miller --- arch/sparc64/kernel/smp.c | 4 ++- arch/sparc64/mm/init.c | 70 ++++++++++++++++++++++++++++++++++++++++++++++- 2 files changed, 72 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index f553264588d..7d7e02ba297 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -122,8 +122,10 @@ void __init smp_callin(void) __local_per_cpu_offset = __per_cpu_offset(cpuid); - if (tlb_type == hypervisor) + if (tlb_type == hypervisor) { sun4v_register_fault_status(); + sun4v_ktsb_register(); + } __flush_tlb_all(); diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 88eb6f6be56..92756da273b 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -1109,6 +1109,69 @@ static void __init tsb_phys_patch(void) } } +/* Don't mark as init, we give this to the Hypervisor. */ +static struct hv_tsb_descr ktsb_descr[2]; +extern struct tsb swapper_tsb[KERNEL_TSB_NENTRIES]; + +static void __init sun4v_ktsb_init(void) +{ + unsigned long ktsb_pa; + + ktsb_pa = kern_base + ((unsigned long)&swapper_tsb[0] - KERNBASE); + + switch (PAGE_SIZE) { + case 8 * 1024: + default: + ktsb_descr[0].pgsz_idx = HV_PGSZ_IDX_8K; + ktsb_descr[0].pgsz_mask = HV_PGSZ_MASK_8K; + break; + + case 64 * 1024: + ktsb_descr[0].pgsz_idx = HV_PGSZ_IDX_64K; + ktsb_descr[0].pgsz_mask = HV_PGSZ_MASK_64K; + break; + + case 512 * 1024: + ktsb_descr[0].pgsz_idx = HV_PGSZ_IDX_512K; + ktsb_descr[0].pgsz_mask = HV_PGSZ_MASK_512K; + break; + + case 4 * 1024 * 1024: + ktsb_descr[0].pgsz_idx = HV_PGSZ_IDX_4MB; + ktsb_descr[0].pgsz_mask = HV_PGSZ_MASK_4MB; + break; + }; + + ktsb_descr[0].assoc = 0; + ktsb_descr[0].num_ttes = KERNEL_TSB_NENTRIES; + ktsb_descr[0].ctx_idx = 0; + ktsb_descr[0].tsb_base = ktsb_pa; + ktsb_descr[0].resv = 0; + + /* XXX When we have a kernel large page size TSB, describe + * XXX it in ktsb_descr[1] here. + */ +} + +void __cpuinit sun4v_ktsb_register(void) +{ + register unsigned long func asm("%o5"); + register unsigned long arg0 asm("%o0"); + register unsigned long arg1 asm("%o1"); + unsigned long pa; + + pa = kern_base + ((unsigned long)&ktsb_descr[0] - KERNBASE); + + func = HV_FAST_MMU_TSB_CTX0; + /* XXX set arg0 to 2 when we use ktsb_descr[1], see above XXX */ + arg0 = 1; + arg1 = pa; + __asm__ __volatile__("ta %6" + : "=&r" (func), "=&r" (arg0), "=&r" (arg1) + : "0" (func), "1" (arg0), "2" (arg1), + "i" (HV_FAST_TRAP)); +} + /* paging_init() sets up the page tables */ extern void cheetah_ecache_flush_init(void); @@ -1129,8 +1192,10 @@ void __init paging_init(void) tlb_type == hypervisor) tsb_phys_patch(); - if (tlb_type == hypervisor) + if (tlb_type == hypervisor) { sun4v_patch_tlb_handlers(); + sun4v_ktsb_init(); + } /* Find available physical memory... */ read_obp_memory("available", &pavail[0], &pavail_ents); @@ -1171,6 +1236,9 @@ void __init paging_init(void) __flush_tlb_all(); + if (tlb_type == hypervisor) + sun4v_ktsb_register(); + /* Setup bootmem... */ pages_avail = 0; last_valid_pfn = end_pfn = bootmem_init(&pages_avail); -- cgit v1.2.3-18-g5258 From c4bce90ea2069e5a87beac806de3090ab32128d5 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 11 Feb 2006 21:57:54 -0800 Subject: [SPARC64]: Deal with PTE layout differences in SUN4V. Yes, you heard it right, they changed the PTE layout for SUN4V. Ho hum... This is the simple and inefficient way to support this. It'll get optimized, don't worry. Signed-off-by: David S. Miller --- arch/sparc64/kernel/itlb_miss.S | 4 +- arch/sparc64/kernel/ktlb.S | 12 +- arch/sparc64/kernel/setup.c | 274 -------------- arch/sparc64/kernel/sun4v_tlb_miss.S | 3 +- arch/sparc64/kernel/tsb.S | 9 +- arch/sparc64/lib/clear_page.S | 8 +- arch/sparc64/lib/copy_page.S | 7 +- arch/sparc64/mm/fault.c | 2 +- arch/sparc64/mm/generic.c | 40 +- arch/sparc64/mm/init.c | 703 ++++++++++++++++++++++++++++++----- arch/sparc64/mm/tsb.c | 12 +- 11 files changed, 645 insertions(+), 429 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/itlb_miss.S b/arch/sparc64/kernel/itlb_miss.S index 97facce27aa..730caa4a150 100644 --- a/arch/sparc64/kernel/itlb_miss.S +++ b/arch/sparc64/kernel/itlb_miss.S @@ -6,9 +6,10 @@ nop ! Delay slot (fill me) TSB_LOAD_QUAD(%g1, %g4) ! Load TSB entry cmp %g4, %g6 ! Compare TAG - sethi %hi(_PAGE_EXEC), %g4 ! Setup exec check + sethi %hi(PAGE_EXEC), %g4 ! Setup exec check /* ITLB ** ICACHE line 2: TSB compare and TLB load */ + ldx [%g4 + %lo(PAGE_EXEC)], %g4 bne,pn %xcc, tsb_miss_itlb ! Miss mov FAULT_CODE_ITLB, %g3 andcc %g5, %g4, %g0 ! Executable? @@ -16,7 +17,6 @@ nop ! Delay slot, fill me stxa %g5, [%g0] ASI_ITLB_DATA_IN ! Load TLB retry ! Trap done - nop /* ITLB ** ICACHE line 3: */ nop diff --git a/arch/sparc64/kernel/ktlb.S b/arch/sparc64/kernel/ktlb.S index 2d333ab4b91..47dfd45971e 100644 --- a/arch/sparc64/kernel/ktlb.S +++ b/arch/sparc64/kernel/ktlb.S @@ -131,16 +131,8 @@ kvmap_dtlb_4v: brgez,pn %g4, kvmap_dtlb_nonlinear nop -#define KERN_HIGHBITS ((_PAGE_VALID|_PAGE_SZ4MB)^0xfffff80000000000) -#define KERN_LOWBITS (_PAGE_CP | _PAGE_CV | _PAGE_P | _PAGE_W) - - sethi %uhi(KERN_HIGHBITS), %g2 - or %g2, %ulo(KERN_HIGHBITS), %g2 - sllx %g2, 32, %g2 - or %g2, KERN_LOWBITS, %g2 - -#undef KERN_HIGHBITS -#undef KERN_LOWBITS + sethi %hi(kern_linear_pte_xor), %g2 + ldx [%g2 + %lo(kern_linear_pte_xor)], %g2 .globl kvmap_linear_patch kvmap_linear_patch: diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index f36b257b2e4..ca75f3b26a3 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -64,12 +64,6 @@ struct screen_info screen_info = { 16 /* orig-video-points */ }; -/* Typing sync at the prom prompt calls the function pointed to by - * the sync callback which I set to the following function. - * This should sync all filesystems and return, for now it just - * prints out pretty messages and returns. - */ - void (*prom_palette)(int); void (*prom_keyboard)(void); @@ -79,263 +73,6 @@ prom_console_write(struct console *con, const char *s, unsigned n) prom_write(s, n); } -static struct console prom_console = { - .name = "prom", - .write = prom_console_write, - .flags = CON_CONSDEV | CON_ENABLED, - .index = -1, -}; - -#define PROM_TRUE -1 -#define PROM_FALSE 0 - -/* Pretty sick eh? */ -int prom_callback(long *args) -{ - struct console *cons, *saved_console = NULL; - unsigned long flags; - char *cmd; - extern spinlock_t prom_entry_lock; - - if (!args) - return -1; - if (!(cmd = (char *)args[0])) - return -1; - - /* - * The callback can be invoked on the cpu that first dropped - * into prom_cmdline after taking the serial interrupt, or on - * a slave processor that was smp_captured() if the - * administrator has done a switch-cpu inside obp. In either - * case, the cpu is marked as in-interrupt. Drop IRQ locks. - */ - irq_exit(); - - /* XXX Revisit the locking here someday. This is a debugging - * XXX feature so it isnt all that critical. -DaveM - */ - local_irq_save(flags); - - spin_unlock(&prom_entry_lock); - cons = console_drivers; - while (cons) { - unregister_console(cons); - cons->flags &= ~(CON_PRINTBUFFER); - cons->next = saved_console; - saved_console = cons; - cons = console_drivers; - } - register_console(&prom_console); - if (!strcmp(cmd, "sync")) { - prom_printf("PROM `%s' command...\n", cmd); - show_free_areas(); - if (current->pid != 0) { - local_irq_enable(); - sys_sync(); - local_irq_disable(); - } - args[2] = 0; - args[args[1] + 3] = -1; - prom_printf("Returning to PROM\n"); - } else if (!strcmp(cmd, "va>tte-data")) { - unsigned long ctx, va; - unsigned long tte = 0; - long res = PROM_FALSE; - - ctx = args[3]; - va = args[4]; - if (ctx) { - /* - * Find process owning ctx, lookup mapping. - */ - struct task_struct *p; - struct mm_struct *mm = NULL; - pgd_t *pgdp; - pud_t *pudp; - pmd_t *pmdp; - pte_t *ptep; - pte_t pte; - - for_each_process(p) { - mm = p->mm; - if (CTX_NRBITS(mm->context) == ctx) - break; - } - if (!mm || - CTX_NRBITS(mm->context) != ctx) - goto done; - - pgdp = pgd_offset(mm, va); - if (pgd_none(*pgdp)) - goto done; - pudp = pud_offset(pgdp, va); - if (pud_none(*pudp)) - goto done; - pmdp = pmd_offset(pudp, va); - if (pmd_none(*pmdp)) - goto done; - - /* Preemption implicitly disabled by virtue of - * being called from inside OBP. - */ - ptep = pte_offset_map(pmdp, va); - pte = *ptep; - if (pte_present(pte)) { - tte = pte_val(pte); - res = PROM_TRUE; - } - pte_unmap(ptep); - goto done; - } - - if ((va >= KERNBASE) && (va < (KERNBASE + (4 * 1024 * 1024)))) { - if (tlb_type == spitfire) { - extern unsigned long sparc64_kern_pri_context; - - /* Spitfire Errata #32 workaround */ - __asm__ __volatile__( - "stxa %0, [%1] %2\n\t" - "flush %%g6" - : /* No outputs */ - : "r" (sparc64_kern_pri_context), - "r" (PRIMARY_CONTEXT), - "i" (ASI_DMMU)); - } - - /* - * Locked down tlb entry. - */ - - if (tlb_type == spitfire) { - tte = spitfire_get_dtlb_data(SPITFIRE_HIGHEST_LOCKED_TLBENT); - res = PROM_TRUE; - } else if (tlb_type == cheetah || tlb_type == cheetah_plus) { - tte = cheetah_get_ldtlb_data(CHEETAH_HIGHEST_LOCKED_TLBENT); - res = PROM_TRUE; - } - goto done; - } - - if (va < PGDIR_SIZE) { - /* - * vmalloc or prom_inherited mapping. - */ - pgd_t *pgdp; - pud_t *pudp; - pmd_t *pmdp; - pte_t *ptep; - pte_t pte; - int error; - - if ((va >= LOW_OBP_ADDRESS) && (va < HI_OBP_ADDRESS)) { - tte = prom_virt_to_phys(va, &error); - if (!error) - res = PROM_TRUE; - goto done; - } - pgdp = pgd_offset_k(va); - if (pgd_none(*pgdp)) - goto done; - pudp = pud_offset(pgdp, va); - if (pud_none(*pudp)) - goto done; - pmdp = pmd_offset(pudp, va); - if (pmd_none(*pmdp)) - goto done; - - /* Preemption implicitly disabled by virtue of - * being called from inside OBP. - */ - ptep = pte_offset_kernel(pmdp, va); - pte = *ptep; - if (pte_present(pte)) { - tte = pte_val(pte); - res = PROM_TRUE; - } - goto done; - } - - if (va < PAGE_OFFSET) { - /* - * No mappings here. - */ - goto done; - } - - if (va & (1UL << 40)) { - /* - * I/O page. - */ - - tte = (__pa(va) & _PAGE_PADDR) | - _PAGE_VALID | _PAGE_SZ4MB | - _PAGE_E | _PAGE_P | _PAGE_W; - res = PROM_TRUE; - goto done; - } - - /* - * Normal page. - */ - tte = (__pa(va) & _PAGE_PADDR) | - _PAGE_VALID | _PAGE_SZ4MB | - _PAGE_CP | _PAGE_CV | _PAGE_P | _PAGE_W; - res = PROM_TRUE; - - done: - if (res == PROM_TRUE) { - args[2] = 3; - args[args[1] + 3] = 0; - args[args[1] + 4] = res; - args[args[1] + 5] = tte; - } else { - args[2] = 2; - args[args[1] + 3] = 0; - args[args[1] + 4] = res; - } - } else if (!strcmp(cmd, ".soft1")) { - unsigned long tte; - - tte = args[3]; - prom_printf("%lx:\"%s%s%s%s%s\" ", - (tte & _PAGE_SOFT) >> 7, - tte & _PAGE_MODIFIED ? "M" : "-", - tte & _PAGE_ACCESSED ? "A" : "-", - tte & _PAGE_READ ? "W" : "-", - tte & _PAGE_WRITE ? "R" : "-", - tte & _PAGE_PRESENT ? "P" : "-"); - - args[2] = 2; - args[args[1] + 3] = 0; - args[args[1] + 4] = PROM_TRUE; - } else if (!strcmp(cmd, ".soft2")) { - unsigned long tte; - - tte = args[3]; - prom_printf("%lx ", (tte & 0x07FC000000000000UL) >> 50); - - args[2] = 2; - args[args[1] + 3] = 0; - args[args[1] + 4] = PROM_TRUE; - } else { - prom_printf("unknown PROM `%s' command...\n", cmd); - } - unregister_console(&prom_console); - while (saved_console) { - cons = saved_console; - saved_console = cons->next; - register_console(cons); - } - spin_lock(&prom_entry_lock); - local_irq_restore(flags); - - /* - * Restore in-interrupt status for a resume from obp. - */ - irq_enter(); - return 0; -} - unsigned int boot_flags = 0; #define BOOTME_DEBUG 0x1 #define BOOTME_SINGLE 0x2 @@ -483,17 +220,6 @@ char reboot_command[COMMAND_LINE_SIZE]; static struct pt_regs fake_swapper_regs = { { 0, }, 0, 0, 0, 0 }; -void register_prom_callbacks(void) -{ - prom_setcallback(prom_callback); - prom_feval(": linux-va>tte-data 2 \" va>tte-data\" $callback drop ; " - "' linux-va>tte-data to va>tte-data"); - prom_feval(": linux-.soft1 1 \" .soft1\" $callback 2drop ; " - "' linux-.soft1 to .soft1"); - prom_feval(": linux-.soft2 1 \" .soft2\" $callback 2drop ; " - "' linux-.soft2 to .soft2"); -} - static void __init per_cpu_patch(void) { #ifdef CONFIG_SMP diff --git a/arch/sparc64/kernel/sun4v_tlb_miss.S b/arch/sparc64/kernel/sun4v_tlb_miss.S index 597359ced23..950ca74b4a5 100644 --- a/arch/sparc64/kernel/sun4v_tlb_miss.S +++ b/arch/sparc64/kernel/sun4v_tlb_miss.S @@ -59,7 +59,8 @@ sun4v_itlb_miss: /* Load TSB tag/pte into %g2/%g3 and compare the tag. */ ldda [%g1] ASI_QUAD_LDD_PHYS, %g2 cmp %g2, %g6 - sethi %hi(_PAGE_EXEC), %g7 + sethi %hi(PAGE_EXEC), %g7 + ldx [%g7 + %lo(PAGE_EXEC)], %g7 bne,a,pn %xcc, tsb_miss_page_table_walk mov FAULT_CODE_ITLB, %g3 andcc %g3, %g7, %g0 diff --git a/arch/sparc64/kernel/tsb.S b/arch/sparc64/kernel/tsb.S index 667dcb077be..be8f0892d72 100644 --- a/arch/sparc64/kernel/tsb.S +++ b/arch/sparc64/kernel/tsb.S @@ -56,10 +56,11 @@ tsb_reload: /* If it is larger than the base page size, don't * bother putting it into the TSB. */ - srlx %g5, 32, %g2 - sethi %hi(_PAGE_ALL_SZ_BITS >> 32), %g7 - and %g2, %g7, %g2 - sethi %hi(_PAGE_SZBITS >> 32), %g7 + sethi %hi(_PAGE_ALL_SZ_BITS), %g7 + ldx [%g7 + %lo(_PAGE_ALL_SZ_BITS)], %g7 + and %g5, %g7, %g2 + sethi %hi(_PAGE_SZBITS), %g7 + ldx [%g7 + %lo(_PAGE_SZBITS)], %g7 cmp %g2, %g7 bne,a,pn %xcc, tsb_tlb_reload TSB_STORE(%g1, %g0) diff --git a/arch/sparc64/lib/clear_page.S b/arch/sparc64/lib/clear_page.S index cdc634bceba..77e531f6c2a 100644 --- a/arch/sparc64/lib/clear_page.S +++ b/arch/sparc64/lib/clear_page.S @@ -23,9 +23,6 @@ * disable preemption during the clear. */ -#define TTE_BITS_TOP (_PAGE_VALID | _PAGE_SZBITS) -#define TTE_BITS_BOTTOM (_PAGE_CP | _PAGE_CV | _PAGE_P | _PAGE_L | _PAGE_W) - .text .globl _clear_page @@ -44,12 +41,11 @@ clear_user_page: /* %o0=dest, %o1=vaddr */ sethi %hi(PAGE_SIZE), %o4 sllx %g2, 32, %g2 - sethi %uhi(TTE_BITS_TOP), %g3 + sethi %hi(PAGE_KERNEL_LOCKED), %g3 - sllx %g3, 32, %g3 + ldx [%g3 + %lo(PAGE_KERNEL_LOCKED)], %g3 sub %o0, %g2, %g1 ! paddr - or %g3, TTE_BITS_BOTTOM, %g3 and %o1, %o4, %o0 ! vaddr D-cache alias bit or %g1, %g3, %g1 ! TTE data diff --git a/arch/sparc64/lib/copy_page.S b/arch/sparc64/lib/copy_page.S index feebb14fd27..37460666a5c 100644 --- a/arch/sparc64/lib/copy_page.S +++ b/arch/sparc64/lib/copy_page.S @@ -23,8 +23,6 @@ * disable preemption during the clear. */ -#define TTE_BITS_TOP (_PAGE_VALID | _PAGE_SZBITS) -#define TTE_BITS_BOTTOM (_PAGE_CP | _PAGE_CV | _PAGE_P | _PAGE_L | _PAGE_W) #define DCACHE_SIZE (PAGE_SIZE * 2) #if (PAGE_SHIFT == 13) || (PAGE_SHIFT == 19) @@ -52,13 +50,12 @@ copy_user_page: /* %o0=dest, %o1=src, %o2=vaddr */ sethi %hi(PAGE_SIZE), %o3 sllx %g2, 32, %g2 - sethi %uhi(TTE_BITS_TOP), %g3 + sethi %hi(PAGE_KERNEL_LOCKED), %g3 - sllx %g3, 32, %g3 + ldx [%g3 + %lo(PAGE_KERNEL_LOCKED)], %g3 sub %o0, %g2, %g1 ! dest paddr sub %o1, %g2, %g2 ! src paddr - or %g3, TTE_BITS_BOTTOM, %g3 and %o2, %o3, %o0 ! vaddr D-cache alias bit or %g1, %g3, %g1 ! dest TTE data diff --git a/arch/sparc64/mm/fault.c b/arch/sparc64/mm/fault.c index 6f0539aa44d..439a53c1e56 100644 --- a/arch/sparc64/mm/fault.c +++ b/arch/sparc64/mm/fault.c @@ -137,7 +137,7 @@ static unsigned int get_user_insn(unsigned long tpc) if (!pte_present(pte)) goto out; - pa = (pte_val(pte) & _PAGE_PADDR); + pa = (pte_pfn(pte) << PAGE_SHIFT); pa += (tpc & ~PAGE_MASK); /* Use phys bypass so we don't pollute dtlb/dcache. */ diff --git a/arch/sparc64/mm/generic.c b/arch/sparc64/mm/generic.c index 580b63da836..5fc5c579e35 100644 --- a/arch/sparc64/mm/generic.c +++ b/arch/sparc64/mm/generic.c @@ -15,15 +15,6 @@ #include #include -static inline pte_t mk_pte_io(unsigned long page, pgprot_t prot, int space) -{ - pte_t pte; - pte_val(pte) = (((page) | pgprot_val(prot) | _PAGE_E) & - ~(unsigned long)_PAGE_CACHE); - pte_val(pte) |= (((unsigned long)space) << 32); - return pte; -} - /* Remap IO memory, the same way as remap_pfn_range(), but use * the obio memory space. * @@ -48,24 +39,29 @@ static inline void io_remap_pte_range(struct mm_struct *mm, pte_t * pte, pte_t entry; unsigned long curend = address + PAGE_SIZE; - entry = mk_pte_io(offset, prot, space); + entry = mk_pte_io(offset, prot, space, PAGE_SIZE); if (!(address & 0xffff)) { - if (!(address & 0x3fffff) && !(offset & 0x3ffffe) && end >= address + 0x400000) { - entry = mk_pte_io(offset, - __pgprot(pgprot_val (prot) | _PAGE_SZ4MB), - space); + if (PAGE_SIZE < (4 * 1024 * 1024) && + !(address & 0x3fffff) && + !(offset & 0x3ffffe) && + end >= address + 0x400000) { + entry = mk_pte_io(offset, prot, space, + 4 * 1024 * 1024); curend = address + 0x400000; offset += 0x400000; - } else if (!(address & 0x7ffff) && !(offset & 0x7fffe) && end >= address + 0x80000) { - entry = mk_pte_io(offset, - __pgprot(pgprot_val (prot) | _PAGE_SZ512K), - space); + } else if (PAGE_SIZE < (512 * 1024) && + !(address & 0x7ffff) && + !(offset & 0x7fffe) && + end >= address + 0x80000) { + entry = mk_pte_io(offset, prot, space, + 512 * 1024 * 1024); curend = address + 0x80000; offset += 0x80000; - } else if (!(offset & 0xfffe) && end >= address + 0x10000) { - entry = mk_pte_io(offset, - __pgprot(pgprot_val (prot) | _PAGE_SZ64K), - space); + } else if (PAGE_SIZE < (64 * 1024) && + !(offset & 0xfffe) && + end >= address + 0x10000) { + entry = mk_pte_io(offset, prot, space, + 64 * 1024); curend = address + 0x10000; offset += 0x10000; } else diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 92756da273b..9c2fc239f3e 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -6,6 +6,7 @@ */ #include +#include #include #include #include @@ -118,6 +119,7 @@ unsigned long phys_base __read_mostly; unsigned long kern_base __read_mostly; unsigned long kern_size __read_mostly; unsigned long pfn_base __read_mostly; +unsigned long kern_linear_pte_xor __read_mostly; /* get_new_mmu_context() uses "cache + 1". */ DEFINE_SPINLOCK(ctx_alloc_lock); @@ -256,6 +258,9 @@ static inline void tsb_insert(struct tsb *ent, unsigned long tag, unsigned long __tsb_insert(tsb_addr, tag, pte); } +unsigned long _PAGE_ALL_SZ_BITS __read_mostly; +unsigned long _PAGE_SZBITS __read_mostly; + void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte) { struct mm_struct *mm; @@ -398,39 +403,9 @@ struct linux_prom_translation { struct linux_prom_translation prom_trans[512] __read_mostly; unsigned int prom_trans_ents __read_mostly; -extern unsigned long prom_boot_page; -extern void prom_remap(unsigned long physpage, unsigned long virtpage, int mmu_ihandle); -extern int prom_get_mmu_ihandle(void); -extern void register_prom_callbacks(void); - /* Exported for SMP bootup purposes. */ unsigned long kern_locked_tte_data; -/* - * Translate PROM's mapping we capture at boot time into physical address. - * The second parameter is only set from prom_callback() invocations. - */ -unsigned long prom_virt_to_phys(unsigned long promva, int *error) -{ - int i; - - for (i = 0; i < prom_trans_ents; i++) { - struct linux_prom_translation *p = &prom_trans[i]; - - if (promva >= p->virt && - promva < (p->virt + p->size)) { - unsigned long base = p->data & _PAGE_PADDR; - - if (error) - *error = 0; - return base + (promva & (8192 - 1)); - } - } - if (error) - *error = 1; - return 0UL; -} - /* The obp translations are saved based on 8k pagesize, since obp can * use a mixture of pagesizes. Misses to the LOW_OBP_ADDRESS -> * HI_OBP_ADDRESS range are handled in ktlb.S. @@ -537,6 +512,8 @@ static void __init hypervisor_tlb_lock(unsigned long vaddr, "3" (arg2), "4" (arg3)); } +static unsigned long kern_large_tte(unsigned long paddr); + static void __init remap_kernel(void) { unsigned long phys_page, tte_vaddr, tte_data; @@ -544,9 +521,7 @@ static void __init remap_kernel(void) tte_vaddr = (unsigned long) KERNBASE; phys_page = (prom_boot_mapping_phys_low >> 22UL) << 22UL; - tte_data = (phys_page | (_PAGE_VALID | _PAGE_SZ4MB | - _PAGE_CP | _PAGE_CV | _PAGE_P | - _PAGE_L | _PAGE_W)); + tte_data = kern_large_tte(phys_page); kern_locked_tte_data = tte_data; @@ -591,10 +566,6 @@ static void __init inherit_prom_mappings(void) prom_printf("Remapping the kernel... "); remap_kernel(); prom_printf("done.\n"); - - prom_printf("Registering callbacks... "); - register_prom_callbacks(); - prom_printf("done.\n"); } void prom_world(int enter) @@ -631,63 +602,6 @@ void __flush_dcache_range(unsigned long start, unsigned long end) } #endif /* DCACHE_ALIASING_POSSIBLE */ -/* If not locked, zap it. */ -void __flush_tlb_all(void) -{ - unsigned long pstate; - int i; - - __asm__ __volatile__("flushw\n\t" - "rdpr %%pstate, %0\n\t" - "wrpr %0, %1, %%pstate" - : "=r" (pstate) - : "i" (PSTATE_IE)); - if (tlb_type == spitfire) { - for (i = 0; i < 64; i++) { - /* Spitfire Errata #32 workaround */ - /* NOTE: Always runs on spitfire, so no - * cheetah+ page size encodings. - */ - __asm__ __volatile__("stxa %0, [%1] %2\n\t" - "flush %%g6" - : /* No outputs */ - : "r" (0), - "r" (PRIMARY_CONTEXT), "i" (ASI_DMMU)); - - if (!(spitfire_get_dtlb_data(i) & _PAGE_L)) { - __asm__ __volatile__("stxa %%g0, [%0] %1\n\t" - "membar #Sync" - : /* no outputs */ - : "r" (TLB_TAG_ACCESS), "i" (ASI_DMMU)); - spitfire_put_dtlb_data(i, 0x0UL); - } - - /* Spitfire Errata #32 workaround */ - /* NOTE: Always runs on spitfire, so no - * cheetah+ page size encodings. - */ - __asm__ __volatile__("stxa %0, [%1] %2\n\t" - "flush %%g6" - : /* No outputs */ - : "r" (0), - "r" (PRIMARY_CONTEXT), "i" (ASI_DMMU)); - - if (!(spitfire_get_itlb_data(i) & _PAGE_L)) { - __asm__ __volatile__("stxa %%g0, [%0] %1\n\t" - "membar #Sync" - : /* no outputs */ - : "r" (TLB_TAG_ACCESS), "i" (ASI_IMMU)); - spitfire_put_itlb_data(i, 0x0UL); - } - } - } else if (tlb_type == cheetah || tlb_type == cheetah_plus) { - cheetah_flush_dtlb_all(); - cheetah_flush_itlb_all(); - } - __asm__ __volatile__("wrpr %0, 0, %%pstate" - : : "r" (pstate)); -} - /* Caller does TLB context flushing on local CPU if necessary. * The caller also ensures that CTX_VALID(mm->context) is false. * @@ -1180,6 +1094,9 @@ extern void sun4v_patch_tlb_handlers(void); static unsigned long last_valid_pfn; pgd_t swapper_pg_dir[2048]; +static void sun4u_pgprot_init(void); +static void sun4v_pgprot_init(void); + void __init paging_init(void) { unsigned long end_pfn, pages_avail, shift; @@ -1188,6 +1105,11 @@ void __init paging_init(void) kern_base = (prom_boot_mapping_phys_low >> 22UL) << 22UL; kern_size = (unsigned long)&_end - (unsigned long)KERNBASE; + if (tlb_type == hypervisor) + sun4v_pgprot_init(); + else + sun4u_pgprot_init(); + if (tlb_type == cheetah_plus || tlb_type == hypervisor) tsb_phys_patch(); @@ -1411,3 +1333,596 @@ void free_initrd_mem(unsigned long start, unsigned long end) } } #endif + +/* SUN4U pte bits... */ +#define _PAGE_SZ4MB_4U 0x6000000000000000 /* 4MB Page */ +#define _PAGE_SZ512K_4U 0x4000000000000000 /* 512K Page */ +#define _PAGE_SZ64K_4U 0x2000000000000000 /* 64K Page */ +#define _PAGE_SZ8K_4U 0x0000000000000000 /* 8K Page */ +#define _PAGE_NFO_4U 0x1000000000000000 /* No Fault Only */ +#define _PAGE_IE_4U 0x0800000000000000 /* Invert Endianness */ +#define _PAGE_SOFT2_4U 0x07FC000000000000 /* Software bits, set 2 */ +#define _PAGE_RES1_4U 0x0002000000000000 /* Reserved */ +#define _PAGE_SZ32MB_4U 0x0001000000000000 /* (Panther) 32MB page */ +#define _PAGE_SZ256MB_4U 0x2001000000000000 /* (Panther) 256MB page */ +#define _PAGE_SN_4U 0x0000800000000000 /* (Cheetah) Snoop */ +#define _PAGE_RES2_4U 0x0000780000000000 /* Reserved */ +#define _PAGE_PADDR_4U 0x000007FFFFFFE000 /* (Cheetah) paddr[42:13] */ +#define _PAGE_SOFT_4U 0x0000000000001F80 /* Software bits: */ +#define _PAGE_EXEC_4U 0x0000000000001000 /* Executable SW bit */ +#define _PAGE_MODIFIED_4U 0x0000000000000800 /* Modified (dirty) */ +#define _PAGE_FILE_4U 0x0000000000000800 /* Pagecache page */ +#define _PAGE_ACCESSED_4U 0x0000000000000400 /* Accessed (ref'd) */ +#define _PAGE_READ_4U 0x0000000000000200 /* Readable SW Bit */ +#define _PAGE_WRITE_4U 0x0000000000000100 /* Writable SW Bit */ +#define _PAGE_PRESENT_4U 0x0000000000000080 /* Present */ +#define _PAGE_L_4U 0x0000000000000040 /* Locked TTE */ +#define _PAGE_CP_4U 0x0000000000000020 /* Cacheable in P-Cache */ +#define _PAGE_CV_4U 0x0000000000000010 /* Cacheable in V-Cache */ +#define _PAGE_E_4U 0x0000000000000008 /* side-Effect */ +#define _PAGE_P_4U 0x0000000000000004 /* Privileged Page */ +#define _PAGE_W_4U 0x0000000000000002 /* Writable */ + +/* SUN4V pte bits... */ +#define _PAGE_NFO_4V 0x4000000000000000 /* No Fault Only */ +#define _PAGE_SOFT2_4V 0x3F00000000000000 /* Software bits, set 2 */ +#define _PAGE_MODIFIED_4V 0x2000000000000000 /* Modified (dirty) */ +#define _PAGE_ACCESSED_4V 0x1000000000000000 /* Accessed (ref'd) */ +#define _PAGE_READ_4V 0x0800000000000000 /* Readable SW Bit */ +#define _PAGE_WRITE_4V 0x0400000000000000 /* Writable SW Bit */ +#define _PAGE_PADDR_4V 0x00FFFFFFFFFFE000 /* paddr[55:13] */ +#define _PAGE_IE_4V 0x0000000000001000 /* Invert Endianness */ +#define _PAGE_E_4V 0x0000000000000800 /* side-Effect */ +#define _PAGE_CP_4V 0x0000000000000400 /* Cacheable in P-Cache */ +#define _PAGE_CV_4V 0x0000000000000200 /* Cacheable in V-Cache */ +#define _PAGE_P_4V 0x0000000000000100 /* Privileged Page */ +#define _PAGE_EXEC_4V 0x0000000000000080 /* Executable Page */ +#define _PAGE_W_4V 0x0000000000000040 /* Writable */ +#define _PAGE_SOFT_4V 0x0000000000000030 /* Software bits */ +#define _PAGE_FILE_4V 0x0000000000000020 /* Pagecache page */ +#define _PAGE_PRESENT_4V 0x0000000000000010 /* Present */ +#define _PAGE_RESV_4V 0x0000000000000008 /* Reserved */ +#define _PAGE_SZ16GB_4V 0x0000000000000007 /* 16GB Page */ +#define _PAGE_SZ2GB_4V 0x0000000000000006 /* 2GB Page */ +#define _PAGE_SZ256MB_4V 0x0000000000000005 /* 256MB Page */ +#define _PAGE_SZ32MB_4V 0x0000000000000004 /* 32MB Page */ +#define _PAGE_SZ4MB_4V 0x0000000000000003 /* 4MB Page */ +#define _PAGE_SZ512K_4V 0x0000000000000002 /* 512K Page */ +#define _PAGE_SZ64K_4V 0x0000000000000001 /* 64K Page */ +#define _PAGE_SZ8K_4V 0x0000000000000000 /* 8K Page */ + +#if PAGE_SHIFT == 13 +#define _PAGE_SZBITS_4U _PAGE_SZ8K_4U +#define _PAGE_SZBITS_4V _PAGE_SZ8K_4V +#elif PAGE_SHIFT == 16 +#define _PAGE_SZBITS_4U _PAGE_SZ64K_4U +#define _PAGE_SZBITS_4V _PAGE_SZ64K_4V +#elif PAGE_SHIFT == 19 +#define _PAGE_SZBITS_4U _PAGE_SZ512K_4U +#define _PAGE_SZBITS_4V _PAGE_SZ512K_4V +#elif PAGE_SHIFT == 22 +#define _PAGE_SZBITS_4U _PAGE_SZ4MB_4U +#define _PAGE_SZBITS_4V _PAGE_SZ4MB_4V +#else +#error Wrong PAGE_SHIFT specified +#endif + +#if defined(CONFIG_HUGETLB_PAGE_SIZE_4MB) +#define _PAGE_SZHUGE_4U _PAGE_SZ4MB_4U +#define _PAGE_SZHUGE_4V _PAGE_SZ4MB_4V +#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512K) +#define _PAGE_SZHUGE_4U _PAGE_SZ512K_4U +#define _PAGE_SZHUGE_4V _PAGE_SZ512K_4V +#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64K) +#define _PAGE_SZHUGE_4U _PAGE_SZ64K_4U +#define _PAGE_SZHUGE_4V _PAGE_SZ64K_4V +#endif + +#define _PAGE_CACHE_4U (_PAGE_CP_4U | _PAGE_CV_4U) +#define _PAGE_CACHE_4V (_PAGE_CP_4V | _PAGE_CV_4V) +#define __DIRTY_BITS_4U (_PAGE_MODIFIED_4U | _PAGE_WRITE_4U | _PAGE_W_4U) +#define __DIRTY_BITS_4V (_PAGE_MODIFIED_4V | _PAGE_WRITE_4V | _PAGE_W_4V) +#define __ACCESS_BITS_4U (_PAGE_ACCESSED_4U | _PAGE_READ_4U | _PAGE_R) +#define __ACCESS_BITS_4V (_PAGE_ACCESSED_4V | _PAGE_READ_4V | _PAGE_R) + +pgprot_t PAGE_KERNEL __read_mostly; +EXPORT_SYMBOL(PAGE_KERNEL); + +pgprot_t PAGE_KERNEL_LOCKED __read_mostly; +pgprot_t PAGE_COPY __read_mostly; +pgprot_t PAGE_EXEC __read_mostly; +unsigned long pg_iobits __read_mostly; + +unsigned long _PAGE_IE __read_mostly; +unsigned long _PAGE_E __read_mostly; +unsigned long _PAGE_CACHE __read_mostly; + +static void prot_init_common(unsigned long page_none, + unsigned long page_shared, + unsigned long page_copy, + unsigned long page_readonly, + unsigned long page_exec_bit) +{ + PAGE_COPY = __pgprot(page_copy); + + protection_map[0x0] = __pgprot(page_none); + protection_map[0x1] = __pgprot(page_readonly & ~page_exec_bit); + protection_map[0x2] = __pgprot(page_copy & ~page_exec_bit); + protection_map[0x3] = __pgprot(page_copy & ~page_exec_bit); + protection_map[0x4] = __pgprot(page_readonly); + protection_map[0x5] = __pgprot(page_readonly); + protection_map[0x6] = __pgprot(page_copy); + protection_map[0x7] = __pgprot(page_copy); + protection_map[0x8] = __pgprot(page_none); + protection_map[0x9] = __pgprot(page_readonly & ~page_exec_bit); + protection_map[0xa] = __pgprot(page_shared & ~page_exec_bit); + protection_map[0xb] = __pgprot(page_shared & ~page_exec_bit); + protection_map[0xc] = __pgprot(page_readonly); + protection_map[0xd] = __pgprot(page_readonly); + protection_map[0xe] = __pgprot(page_shared); + protection_map[0xf] = __pgprot(page_shared); +} + +static void __init sun4u_pgprot_init(void) +{ + unsigned long page_none, page_shared, page_copy, page_readonly; + unsigned long page_exec_bit; + + PAGE_KERNEL = __pgprot (_PAGE_PRESENT_4U | _PAGE_VALID | + _PAGE_CACHE_4U | _PAGE_P_4U | + __ACCESS_BITS_4U | __DIRTY_BITS_4U | + _PAGE_EXEC_4U); + PAGE_KERNEL_LOCKED = __pgprot (_PAGE_PRESENT_4U | _PAGE_VALID | + _PAGE_CACHE_4U | _PAGE_P_4U | + __ACCESS_BITS_4U | __DIRTY_BITS_4U | + _PAGE_EXEC_4U | _PAGE_L_4U); + PAGE_EXEC = __pgprot(_PAGE_EXEC_4U); + + _PAGE_IE = _PAGE_IE_4U; + _PAGE_E = _PAGE_E_4U; + _PAGE_CACHE = _PAGE_CACHE_4U; + + pg_iobits = (_PAGE_VALID | _PAGE_PRESENT_4U | __DIRTY_BITS_4U | + __ACCESS_BITS_4U | _PAGE_E_4U); + + kern_linear_pte_xor = (_PAGE_VALID | _PAGE_SZ4MB_4U) ^ + 0xfffff80000000000; + kern_linear_pte_xor |= (_PAGE_CP_4U | _PAGE_CV_4U | + _PAGE_P_4U | _PAGE_W_4U); + + _PAGE_SZBITS = _PAGE_SZBITS_4U; + _PAGE_ALL_SZ_BITS = (_PAGE_SZ4MB_4U | _PAGE_SZ512K_4U | + _PAGE_SZ64K_4U | _PAGE_SZ8K_4U | + _PAGE_SZ32MB_4U | _PAGE_SZ256MB_4U); + + + page_none = _PAGE_PRESENT_4U | _PAGE_ACCESSED_4U | _PAGE_CACHE_4U; + page_shared = (_PAGE_VALID | _PAGE_PRESENT_4U | _PAGE_CACHE_4U | + __ACCESS_BITS_4U | _PAGE_WRITE_4U | _PAGE_EXEC_4U); + page_copy = (_PAGE_VALID | _PAGE_PRESENT_4U | _PAGE_CACHE_4U | + __ACCESS_BITS_4U | _PAGE_EXEC_4U); + page_readonly = (_PAGE_VALID | _PAGE_PRESENT_4U | _PAGE_CACHE_4U | + __ACCESS_BITS_4U | _PAGE_EXEC_4U); + + page_exec_bit = _PAGE_EXEC_4U; + + prot_init_common(page_none, page_shared, page_copy, page_readonly, + page_exec_bit); +} + +static void __init sun4v_pgprot_init(void) +{ + unsigned long page_none, page_shared, page_copy, page_readonly; + unsigned long page_exec_bit; + + PAGE_KERNEL = __pgprot (_PAGE_PRESENT_4V | _PAGE_VALID | + _PAGE_CACHE_4V | _PAGE_P_4V | + __ACCESS_BITS_4V | __DIRTY_BITS_4V | + _PAGE_EXEC_4V); + PAGE_KERNEL_LOCKED = PAGE_KERNEL; + PAGE_EXEC = __pgprot(_PAGE_EXEC_4V); + + _PAGE_IE = _PAGE_IE_4V; + _PAGE_E = _PAGE_E_4V; + _PAGE_CACHE = _PAGE_CACHE_4V; + + kern_linear_pte_xor = (_PAGE_VALID | _PAGE_SZ4MB_4V) ^ + 0xfffff80000000000; + kern_linear_pte_xor |= (_PAGE_CP_4V | _PAGE_CV_4V | + _PAGE_P_4V | _PAGE_W_4V); + + pg_iobits = (_PAGE_VALID | _PAGE_PRESENT_4V | __DIRTY_BITS_4V | + __ACCESS_BITS_4V | _PAGE_E_4V); + + _PAGE_SZBITS = _PAGE_SZBITS_4V; + _PAGE_ALL_SZ_BITS = (_PAGE_SZ16GB_4V | _PAGE_SZ2GB_4V | + _PAGE_SZ256MB_4V | _PAGE_SZ32MB_4V | + _PAGE_SZ4MB_4V | _PAGE_SZ512K_4V | + _PAGE_SZ64K_4V | _PAGE_SZ8K_4V); + + page_none = _PAGE_PRESENT_4V | _PAGE_ACCESSED_4V | _PAGE_CACHE_4V; + page_shared = (_PAGE_VALID | _PAGE_PRESENT_4V | _PAGE_CACHE_4V | + __ACCESS_BITS_4V | _PAGE_WRITE_4V | _PAGE_EXEC_4V); + page_copy = (_PAGE_VALID | _PAGE_PRESENT_4V | _PAGE_CACHE_4V | + __ACCESS_BITS_4V | _PAGE_EXEC_4V); + page_readonly = (_PAGE_VALID | _PAGE_PRESENT_4V | _PAGE_CACHE_4V | + __ACCESS_BITS_4V | _PAGE_EXEC_4V); + + page_exec_bit = _PAGE_EXEC_4V; + + prot_init_common(page_none, page_shared, page_copy, page_readonly, + page_exec_bit); +} + +unsigned long pte_sz_bits(unsigned long sz) +{ + if (tlb_type == hypervisor) { + switch (sz) { + case 8 * 1024: + default: + return _PAGE_SZ8K_4V; + case 64 * 1024: + return _PAGE_SZ64K_4V; + case 512 * 1024: + return _PAGE_SZ512K_4V; + case 4 * 1024 * 1024: + return _PAGE_SZ4MB_4V; + }; + } else { + switch (sz) { + case 8 * 1024: + default: + return _PAGE_SZ8K_4U; + case 64 * 1024: + return _PAGE_SZ64K_4U; + case 512 * 1024: + return _PAGE_SZ512K_4U; + case 4 * 1024 * 1024: + return _PAGE_SZ4MB_4U; + }; + } +} + +pte_t mk_pte_io(unsigned long page, pgprot_t prot, int space, unsigned long page_size) +{ + pte_t pte; + if (tlb_type == hypervisor) { + pte_val(pte) = (((page) | pgprot_val(prot) | _PAGE_E_4V) & + ~(unsigned long)_PAGE_CACHE_4V); + } else { + pte_val(pte) = (((page) | pgprot_val(prot) | _PAGE_E_4U) & + ~(unsigned long)_PAGE_CACHE_4U); + } + pte_val(pte) |= (((unsigned long)space) << 32); + pte_val(pte) |= pte_sz_bits(page_size); + return pte; +} + +unsigned long pte_present(pte_t pte) +{ + return (pte_val(pte) & + ((tlb_type == hypervisor) ? + _PAGE_PRESENT_4V : _PAGE_PRESENT_4U)); +} + +unsigned long pte_file(pte_t pte) +{ + return (pte_val(pte) & + ((tlb_type == hypervisor) ? + _PAGE_FILE_4V : _PAGE_FILE_4U)); +} + +unsigned long pte_read(pte_t pte) +{ + return (pte_val(pte) & + ((tlb_type == hypervisor) ? + _PAGE_READ_4V : _PAGE_READ_4U)); +} + +unsigned long pte_exec(pte_t pte) +{ + return (pte_val(pte) & + ((tlb_type == hypervisor) ? + _PAGE_EXEC_4V : _PAGE_EXEC_4U)); +} + +unsigned long pte_write(pte_t pte) +{ + return (pte_val(pte) & + ((tlb_type == hypervisor) ? + _PAGE_WRITE_4V : _PAGE_WRITE_4U)); +} + +unsigned long pte_dirty(pte_t pte) +{ + return (pte_val(pte) & + ((tlb_type == hypervisor) ? + _PAGE_MODIFIED_4V : _PAGE_MODIFIED_4U)); +} + +unsigned long pte_young(pte_t pte) +{ + return (pte_val(pte) & + ((tlb_type == hypervisor) ? + _PAGE_ACCESSED_4V : _PAGE_ACCESSED_4U)); +} + +pte_t pte_wrprotect(pte_t pte) +{ + unsigned long mask = _PAGE_WRITE_4U | _PAGE_W_4U; + + if (tlb_type == hypervisor) + mask = _PAGE_WRITE_4V | _PAGE_W_4V; + + return __pte(pte_val(pte) & ~mask); +} + +pte_t pte_rdprotect(pte_t pte) +{ + unsigned long mask = _PAGE_R | _PAGE_READ_4U; + + if (tlb_type == hypervisor) + mask = _PAGE_R | _PAGE_READ_4V; + + return __pte(pte_val(pte) & ~mask); +} + +pte_t pte_mkclean(pte_t pte) +{ + unsigned long mask = _PAGE_MODIFIED_4U | _PAGE_W_4U; + + if (tlb_type == hypervisor) + mask = _PAGE_MODIFIED_4V | _PAGE_W_4V; + + return __pte(pte_val(pte) & ~mask); +} + +pte_t pte_mkold(pte_t pte) +{ + unsigned long mask = _PAGE_R | _PAGE_ACCESSED_4U; + + if (tlb_type == hypervisor) + mask = _PAGE_R | _PAGE_ACCESSED_4V; + + return __pte(pte_val(pte) & ~mask); +} + +pte_t pte_mkyoung(pte_t pte) +{ + unsigned long mask = _PAGE_R | _PAGE_ACCESSED_4U; + + if (tlb_type == hypervisor) + mask = _PAGE_R | _PAGE_ACCESSED_4V; + + return __pte(pte_val(pte) | mask); +} + +pte_t pte_mkwrite(pte_t pte) +{ + unsigned long mask = _PAGE_WRITE_4U; + + if (tlb_type == hypervisor) + mask = _PAGE_WRITE_4V; + + return __pte(pte_val(pte) | mask); +} + +pte_t pte_mkdirty(pte_t pte) +{ + unsigned long mask = _PAGE_MODIFIED_4U | _PAGE_W_4U; + + if (tlb_type == hypervisor) + mask = _PAGE_MODIFIED_4V | _PAGE_W_4V; + + return __pte(pte_val(pte) | mask); +} + +pte_t pte_mkhuge(pte_t pte) +{ + unsigned long mask = _PAGE_SZHUGE_4U; + + if (tlb_type == hypervisor) + mask = _PAGE_SZHUGE_4V; + + return __pte(pte_val(pte) | mask); +} + +pte_t pgoff_to_pte(unsigned long off) +{ + unsigned long bit = _PAGE_FILE_4U; + + if (tlb_type == hypervisor) + bit = _PAGE_FILE_4V; + + return __pte((off << PAGE_SHIFT) | bit); +} + +pgprot_t pgprot_noncached(pgprot_t prot) +{ + unsigned long val = pgprot_val(prot); + unsigned long off = _PAGE_CP_4U | _PAGE_CV_4U; + unsigned long on = _PAGE_E_4U; + + if (tlb_type == hypervisor) { + off = _PAGE_CP_4V | _PAGE_CV_4V; + on = _PAGE_E_4V; + } + + return __pgprot((val & ~off) | on); +} + +pte_t pfn_pte(unsigned long pfn, pgprot_t prot) +{ + unsigned long sz_bits = _PAGE_SZBITS_4U; + + if (tlb_type == hypervisor) + sz_bits = _PAGE_SZBITS_4V; + + return __pte((pfn << PAGE_SHIFT) | pgprot_val(prot) | sz_bits); +} + +unsigned long pte_pfn(pte_t pte) +{ + unsigned long mask = _PAGE_PADDR_4U; + + if (tlb_type == hypervisor) + mask = _PAGE_PADDR_4V; + + return (pte_val(pte) & mask) >> PAGE_SHIFT; +} + +pte_t pte_modify(pte_t orig_pte, pgprot_t new_prot) +{ + unsigned long preserve_mask; + unsigned long val; + + preserve_mask = (_PAGE_PADDR_4U | + _PAGE_MODIFIED_4U | + _PAGE_ACCESSED_4U | + _PAGE_CP_4U | + _PAGE_CV_4U | + _PAGE_E_4U | + _PAGE_PRESENT_4U | + _PAGE_SZBITS_4U); + if (tlb_type == hypervisor) + preserve_mask = (_PAGE_PADDR_4V | + _PAGE_MODIFIED_4V | + _PAGE_ACCESSED_4V | + _PAGE_CP_4V | + _PAGE_CV_4V | + _PAGE_E_4V | + _PAGE_PRESENT_4V | + _PAGE_SZBITS_4V); + + val = (pte_val(orig_pte) & preserve_mask); + + return __pte(val | (pgprot_val(new_prot) & ~preserve_mask)); +} + +static unsigned long kern_large_tte(unsigned long paddr) +{ + unsigned long val; + + val = (_PAGE_VALID | _PAGE_SZ4MB_4U | + _PAGE_CP_4U | _PAGE_CV_4U | _PAGE_P_4U | + _PAGE_EXEC_4U | _PAGE_L_4U | _PAGE_W_4U); + if (tlb_type == hypervisor) + val = (_PAGE_VALID | _PAGE_SZ4MB_4V | + _PAGE_CP_4V | _PAGE_CV_4V | _PAGE_P_4V | + _PAGE_EXEC_4V | _PAGE_W_4V); + + return val | paddr; +} + +/* + * Translate PROM's mapping we capture at boot time into physical address. + * The second parameter is only set from prom_callback() invocations. + */ +unsigned long prom_virt_to_phys(unsigned long promva, int *error) +{ + unsigned long mask; + int i; + + mask = _PAGE_PADDR_4U; + if (tlb_type == hypervisor) + mask = _PAGE_PADDR_4V; + + for (i = 0; i < prom_trans_ents; i++) { + struct linux_prom_translation *p = &prom_trans[i]; + + if (promva >= p->virt && + promva < (p->virt + p->size)) { + unsigned long base = p->data & mask; + + if (error) + *error = 0; + return base + (promva & (8192 - 1)); + } + } + if (error) + *error = 1; + return 0UL; +} + +/* XXX We should kill off this ugly thing at so me point. XXX */ +unsigned long sun4u_get_pte(unsigned long addr) +{ + pgd_t *pgdp; + pud_t *pudp; + pmd_t *pmdp; + pte_t *ptep; + unsigned long mask = _PAGE_PADDR_4U; + + if (tlb_type == hypervisor) + mask = _PAGE_PADDR_4V; + + if (addr >= PAGE_OFFSET) + return addr & mask; + + if ((addr >= LOW_OBP_ADDRESS) && (addr < HI_OBP_ADDRESS)) + return prom_virt_to_phys(addr, NULL); + + pgdp = pgd_offset_k(addr); + pudp = pud_offset(pgdp, addr); + pmdp = pmd_offset(pudp, addr); + ptep = pte_offset_kernel(pmdp, addr); + + return pte_val(*ptep) & mask; +} + +/* If not locked, zap it. */ +void __flush_tlb_all(void) +{ + unsigned long pstate; + int i; + + __asm__ __volatile__("flushw\n\t" + "rdpr %%pstate, %0\n\t" + "wrpr %0, %1, %%pstate" + : "=r" (pstate) + : "i" (PSTATE_IE)); + if (tlb_type == spitfire) { + for (i = 0; i < 64; i++) { + /* Spitfire Errata #32 workaround */ + /* NOTE: Always runs on spitfire, so no + * cheetah+ page size encodings. + */ + __asm__ __volatile__("stxa %0, [%1] %2\n\t" + "flush %%g6" + : /* No outputs */ + : "r" (0), + "r" (PRIMARY_CONTEXT), "i" (ASI_DMMU)); + + if (!(spitfire_get_dtlb_data(i) & _PAGE_L_4U)) { + __asm__ __volatile__("stxa %%g0, [%0] %1\n\t" + "membar #Sync" + : /* no outputs */ + : "r" (TLB_TAG_ACCESS), "i" (ASI_DMMU)); + spitfire_put_dtlb_data(i, 0x0UL); + } + + /* Spitfire Errata #32 workaround */ + /* NOTE: Always runs on spitfire, so no + * cheetah+ page size encodings. + */ + __asm__ __volatile__("stxa %0, [%1] %2\n\t" + "flush %%g6" + : /* No outputs */ + : "r" (0), + "r" (PRIMARY_CONTEXT), "i" (ASI_DMMU)); + + if (!(spitfire_get_itlb_data(i) & _PAGE_L_4U)) { + __asm__ __volatile__("stxa %%g0, [%0] %1\n\t" + "membar #Sync" + : /* no outputs */ + : "r" (TLB_TAG_ACCESS), "i" (ASI_IMMU)); + spitfire_put_itlb_data(i, 0x0UL); + } + } + } else if (tlb_type == cheetah || tlb_type == cheetah_plus) { + cheetah_flush_dtlb_all(); + cheetah_flush_itlb_all(); + } + __asm__ __volatile__("wrpr %0, 0, %%pstate" + : : "r" (pstate)); +} diff --git a/arch/sparc64/mm/tsb.c b/arch/sparc64/mm/tsb.c index c5dc4b0cc1c..975242ab88e 100644 --- a/arch/sparc64/mm/tsb.c +++ b/arch/sparc64/mm/tsb.c @@ -85,8 +85,7 @@ static void setup_tsb_params(struct mm_struct *mm, unsigned long tsb_bytes) mm->context.tsb_nentries = tsb_bytes / sizeof(struct tsb); base = TSBMAP_BASE; - tte = (_PAGE_VALID | _PAGE_L | _PAGE_CP | - _PAGE_CV | _PAGE_P | _PAGE_W); + tte = pgprot_val(PAGE_KERNEL_LOCKED); tsb_paddr = __pa(mm->context.tsb); BUG_ON(tsb_paddr & (tsb_bytes - 1UL)); @@ -99,55 +98,48 @@ static void setup_tsb_params(struct mm_struct *mm, unsigned long tsb_bytes) #ifdef DCACHE_ALIASING_POSSIBLE base += (tsb_paddr & 8192); #endif - tte |= _PAGE_SZ8K; page_sz = 8192; break; case 8192 << 1: tsb_reg = 0x1UL; - tte |= _PAGE_SZ64K; page_sz = 64 * 1024; break; case 8192 << 2: tsb_reg = 0x2UL; - tte |= _PAGE_SZ64K; page_sz = 64 * 1024; break; case 8192 << 3: tsb_reg = 0x3UL; - tte |= _PAGE_SZ64K; page_sz = 64 * 1024; break; case 8192 << 4: tsb_reg = 0x4UL; - tte |= _PAGE_SZ512K; page_sz = 512 * 1024; break; case 8192 << 5: tsb_reg = 0x5UL; - tte |= _PAGE_SZ512K; page_sz = 512 * 1024; break; case 8192 << 6: tsb_reg = 0x6UL; - tte |= _PAGE_SZ512K; page_sz = 512 * 1024; break; case 8192 << 7: tsb_reg = 0x7UL; - tte |= _PAGE_SZ4MB; page_sz = 4 * 1024 * 1024; break; default: BUG(); }; + tte |= pte_sz_bits(page_sz); if (tlb_type == cheetah_plus || tlb_type == hypervisor) { /* Physical mapping, no locked TLB entry for TSB. */ -- cgit v1.2.3-18-g5258 From b5a37e96b8dc067b979e44c4e109c9bc49c2f4d8 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 11 Feb 2006 23:07:13 -0800 Subject: [SPARC64]: Fix mondo queue allocations. We have to use bootmem during init_IRQ and page alloc for sibling cpu calls. Also, fix incorrect hypervisor call return value checks in the hypervisor SMP cpu mondo send code. Signed-off-by: David S. Miller --- arch/sparc64/kernel/irq.c | 83 +++++++++++++++++++++++++++------------- arch/sparc64/kernel/smp.c | 4 +- arch/sparc64/kernel/trampoline.S | 2 +- 3 files changed, 59 insertions(+), 30 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index c5dd6daf127..51f65054bf1 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include @@ -861,24 +862,16 @@ void init_irqwork_curcpu(void) memset(__irq_work + cpu, 0, sizeof(struct irq_work_struct)); } -static void __cpuinit init_one_mondo(unsigned long *pa_ptr, unsigned long type) +static void __cpuinit register_one_mondo(unsigned long paddr, unsigned long type) { register unsigned long func __asm__("%o5"); register unsigned long arg0 __asm__("%o0"); register unsigned long arg1 __asm__("%o1"); register unsigned long arg2 __asm__("%o2"); - unsigned long page = get_zeroed_page(GFP_ATOMIC); - - if (!page) { - prom_printf("SUN4V: Error, cannot allocate mondo queue.\n"); - prom_halt(); - } - - *pa_ptr = __pa(page); func = HV_FAST_CPU_QCONF; arg0 = type; - arg1 = *pa_ptr; + arg1 = paddr; arg2 = 128; /* XXX Implied by Niagara queue offsets. XXX */ __asm__ __volatile__("ta %8" : "=&r" (func), "=&r" (arg0), @@ -887,16 +880,48 @@ static void __cpuinit init_one_mondo(unsigned long *pa_ptr, unsigned long type) "2" (arg1), "3" (arg2), "i" (HV_FAST_TRAP)); - if (func != HV_EOK) { + if (arg0 != HV_EOK) { prom_printf("SUN4V: cpu_qconf(%lu) failed with error %lu\n", type, func); prom_halt(); } } -static void __cpuinit init_one_kbuf(unsigned long *pa_ptr) +static void __cpuinit sun4v_register_mondo_queues(int this_cpu) { - unsigned long page = get_zeroed_page(GFP_ATOMIC); + struct trap_per_cpu *tb = &trap_block[this_cpu]; + + register_one_mondo(tb->cpu_mondo_pa, HV_CPU_QUEUE_CPU_MONDO); + register_one_mondo(tb->dev_mondo_pa, HV_CPU_QUEUE_DEVICE_MONDO); + register_one_mondo(tb->resum_mondo_pa, HV_CPU_QUEUE_RES_ERROR); + register_one_mondo(tb->nonresum_mondo_pa, HV_CPU_QUEUE_NONRES_ERROR); +} + +static void __cpuinit alloc_one_mondo(unsigned long *pa_ptr, int use_bootmem) +{ + void *page; + + if (use_bootmem) + page = alloc_bootmem_low_pages(PAGE_SIZE); + else + page = (void *) get_zeroed_page(GFP_ATOMIC); + + if (!page) { + prom_printf("SUN4V: Error, cannot allocate mondo queue.\n"); + prom_halt(); + } + + *pa_ptr = __pa(page); +} + +static void __cpuinit alloc_one_kbuf(unsigned long *pa_ptr, int use_bootmem) +{ + void *page; + + if (use_bootmem) + page = alloc_bootmem_low_pages(PAGE_SIZE); + else + page = (void *) get_zeroed_page(GFP_ATOMIC); if (!page) { prom_printf("SUN4V: Error, cannot allocate kbuf page.\n"); @@ -906,14 +931,18 @@ static void __cpuinit init_one_kbuf(unsigned long *pa_ptr) *pa_ptr = __pa(page); } -static void __cpuinit init_cpu_send_mondo_info(struct trap_per_cpu *tb) +static void __cpuinit init_cpu_send_mondo_info(struct trap_per_cpu *tb, int use_bootmem) { #ifdef CONFIG_SMP - unsigned long page; + void *page; BUILD_BUG_ON((NR_CPUS * sizeof(u16)) > (PAGE_SIZE - 64)); - page = get_zeroed_page(GFP_ATOMIC); + if (use_bootmem) + page = alloc_bootmem_low_pages(PAGE_SIZE); + else + page = (void *) get_zeroed_page(GFP_ATOMIC); + if (!page) { prom_printf("SUN4V: Error, cannot allocate cpu mondo page.\n"); prom_halt(); @@ -924,22 +953,22 @@ static void __cpuinit init_cpu_send_mondo_info(struct trap_per_cpu *tb) #endif } -/* Allocate and init the mondo and error queues for this cpu. */ -void __cpuinit sun4v_init_mondo_queues(void) +/* Allocate and register the mondo and error queues for this cpu. */ +void __cpuinit sun4v_init_mondo_queues(int use_bootmem) { int cpu = hard_smp_processor_id(); struct trap_per_cpu *tb = &trap_block[cpu]; - init_one_mondo(&tb->cpu_mondo_pa, HV_CPU_QUEUE_CPU_MONDO); - init_one_mondo(&tb->dev_mondo_pa, HV_CPU_QUEUE_DEVICE_MONDO); - - init_one_mondo(&tb->resum_mondo_pa, HV_CPU_QUEUE_RES_ERROR); - init_one_kbuf(&tb->resum_kernel_buf_pa); + alloc_one_mondo(&tb->cpu_mondo_pa, use_bootmem); + alloc_one_mondo(&tb->dev_mondo_pa, use_bootmem); + alloc_one_mondo(&tb->resum_mondo_pa, use_bootmem); + alloc_one_kbuf(&tb->resum_kernel_buf_pa, use_bootmem); + alloc_one_mondo(&tb->nonresum_mondo_pa, use_bootmem); + alloc_one_kbuf(&tb->nonresum_kernel_buf_pa, use_bootmem); - init_one_mondo(&tb->nonresum_mondo_pa, HV_CPU_QUEUE_NONRES_ERROR); - init_one_kbuf(&tb->nonresum_kernel_buf_pa); + init_cpu_send_mondo_info(tb, use_bootmem); - init_cpu_send_mondo_info(tb); + sun4v_register_mondo_queues(cpu); } /* Only invoked on boot processor. */ @@ -950,7 +979,7 @@ void __init init_IRQ(void) memset(&ivector_table[0], 0, sizeof(ivector_table)); if (tlb_type == hypervisor) - sun4v_init_mondo_queues(); + sun4v_init_mondo_queues(1); /* We need to clear any IRQ's pending in the soft interrupt * registers, a spurious one could be left around from the diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 7d7e02ba297..d637168ce37 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -591,7 +591,7 @@ static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t "2" (arg1), "3" (arg2), "i" (HV_FAST_TRAP) : "memory"); - if (likely(func == HV_EOK)) + if (likely(arg0 == HV_EOK)) break; if (unlikely(++retries > 100)) { @@ -644,7 +644,7 @@ static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t "2" (arg1), "3" (arg2), "i" (HV_FAST_TRAP) : "memory"); - if (likely(func == HV_EOK)) + if (likely(arg0 == HV_EOK)) break; if (unlikely(++retries > 100)) { diff --git a/arch/sparc64/kernel/trampoline.S b/arch/sparc64/kernel/trampoline.S index 88382200c7b..22fb24eac99 100644 --- a/arch/sparc64/kernel/trampoline.S +++ b/arch/sparc64/kernel/trampoline.S @@ -367,7 +367,7 @@ after_lock_tlb: nop call sun4v_init_mondo_queues - nop + mov 0, %o0 1: call init_cur_cpu_trap nop -- cgit v1.2.3-18-g5258 From 7aa6264543f19ceea9b5f386242917296d63be05 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 11 Feb 2006 23:14:59 -0800 Subject: [SPARC64]: Do not try to write to %tick or %stick on SUN4V. Writes by privileged code are disallowed. The hypervisor manages the non-privileged bit. Signed-off-by: David S. Miller --- arch/sparc64/kernel/time.c | 26 ++++++++++++++++---------- 1 file changed, 16 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c index 24681b9b442..7041146f86f 100644 --- a/arch/sparc64/kernel/time.c +++ b/arch/sparc64/kernel/time.c @@ -193,16 +193,22 @@ struct sparc64_tick_ops *tick_ops __read_mostly = &tick_operations; static void stick_init_tick(unsigned long offset) { - tick_disable_protection(); - - /* Let the user get at STICK too. */ - __asm__ __volatile__( - " rd %%asr24, %%g2\n" - " andn %%g2, %0, %%g2\n" - " wr %%g2, 0, %%asr24" - : /* no outputs */ - : "r" (TICK_PRIV_BIT) - : "g1", "g2"); + /* Writes to the %tick and %stick register are not + * allowed on sun4v. The Hypervisor controls that + * bit, per-strand. + */ + if (tlb_type != hypervisor) { + tick_disable_protection(); + + /* Let the user get at STICK too. */ + __asm__ __volatile__( + " rd %%asr24, %%g2\n" + " andn %%g2, %0, %%g2\n" + " wr %%g2, 0, %%asr24" + : /* no outputs */ + : "r" (TICK_PRIV_BIT) + : "g1", "g2"); + } __asm__ __volatile__( " rd %%asr24, %%g1\n" -- cgit v1.2.3-18-g5258 From 02fead75055246d01af56a45a9d1b311d506da3e Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 11 Feb 2006 23:22:47 -0800 Subject: [SPARC64]: Do not try to synchronize %stick registers on SUN4V. Writes by privileged code are not allowed. Signed-off-by: David S. Miller --- arch/sparc64/kernel/smp.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index d637168ce37..2dbe008d6b7 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -1278,7 +1278,11 @@ int __devinit __cpu_up(unsigned int cpu) if (!cpu_isset(cpu, cpu_online_map)) { ret = -ENODEV; } else { - smp_synchronize_one_tick(cpu); + /* On SUN4V, writes to %tick and %stick are + * not allowed. + */ + if (tlb_type != hypervisor) + smp_synchronize_one_tick(cpu); } } return ret; -- cgit v1.2.3-18-g5258 From 1a7a242c898dd131f2df005c492e9b44fb8900e0 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 11 Feb 2006 23:24:30 -0800 Subject: [SPARC64]: Recognize "virtual-console" as input and output console device. Signed-off-by: David S. Miller --- arch/sparc64/kernel/setup.c | 5 +++++ arch/sparc64/prom/console.c | 6 ++++++ 2 files changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index ca75f3b26a3..4f253a0755b 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -405,6 +405,11 @@ static int __init set_preferred_console(void) serial_console = 2; } else if (idev == PROMDEV_IRSC && odev == PROMDEV_ORSC) { serial_console = 3; + } else if (idev == PROMDEV_IVCONS && odev == PROMDEV_OVCONS) { + /* sunhv_console_init() doesn't check the serial_console + * value anyways... + */ + serial_console = 4; } else { prom_printf("Inconsistent console: " "input %d, output %d\n", diff --git a/arch/sparc64/prom/console.c b/arch/sparc64/prom/console.c index ac6d035dd15..7c25c54cefd 100644 --- a/arch/sparc64/prom/console.c +++ b/arch/sparc64/prom/console.c @@ -102,6 +102,9 @@ prom_query_input_device(void) if (!strncmp (propb, "rsc", 3)) return PROMDEV_IRSC; + if (!strncmp (propb, "virtual-console", 3)) + return PROMDEV_IVCONS; + if (strncmp (propb, "tty", 3) || !propb[3]) return PROMDEV_I_UNK; @@ -143,6 +146,9 @@ prom_query_output_device(void) if (!strncmp (propb, "rsc", 3)) return PROMDEV_ORSC; + if (!strncmp (propb, "virtual-console", 3)) + return PROMDEV_OVCONS; + if (strncmp (propb, "tty", 3) || !propb[3]) return PROMDEV_O_UNK; -- cgit v1.2.3-18-g5258 From 6241e5cc6afe2c5b75b51e1c890df18f05838cf6 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 11 Feb 2006 23:28:40 -0800 Subject: [SPARC64]: Fix branch signedness bug in all code patching. The bug that hit SUN4V TLB patching exists elsewhere. Make sure we cure all such cases. Signed-off-by: David S. Miller --- arch/sparc64/lib/NGpage.S | 3 ++- arch/sparc64/lib/NGpatch.S | 3 ++- arch/sparc64/lib/U3patch.S | 3 ++- 3 files changed, 6 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/lib/NGpage.S b/arch/sparc64/lib/NGpage.S index 0e6152c28b0..7d7c3bb8dcb 100644 --- a/arch/sparc64/lib/NGpage.S +++ b/arch/sparc64/lib/NGpage.S @@ -75,7 +75,8 @@ NGclear_user_page: /* %o0=dest, %o1=vaddr */ or %g2, %lo(OLD), %g2; \ sub %g1, %g2, %g1; \ sethi %hi(BRANCH_ALWAYS), %g3; \ - srl %g1, 2, %g1; \ + sll %g1, 11, %g1; \ + srl %g1, 11 + 2, %g1; \ or %g3, %lo(BRANCH_ALWAYS), %g3; \ or %g3, %g1, %g3; \ stw %g3, [%g2]; \ diff --git a/arch/sparc64/lib/NGpatch.S b/arch/sparc64/lib/NGpatch.S index f13ec9e4c8a..3b0674fc336 100644 --- a/arch/sparc64/lib/NGpatch.S +++ b/arch/sparc64/lib/NGpatch.S @@ -12,7 +12,8 @@ or %g2, %lo(OLD), %g2; \ sub %g1, %g2, %g1; \ sethi %hi(BRANCH_ALWAYS), %g3; \ - srl %g1, 2, %g1; \ + sll %g1, 11, %g1; \ + srl %g1, 11 + 2, %g1; \ or %g3, %lo(BRANCH_ALWAYS), %g3; \ or %g3, %g1, %g3; \ stw %g3, [%g2]; \ diff --git a/arch/sparc64/lib/U3patch.S b/arch/sparc64/lib/U3patch.S index e2b6c5e4b95..ecc302619a6 100644 --- a/arch/sparc64/lib/U3patch.S +++ b/arch/sparc64/lib/U3patch.S @@ -12,7 +12,8 @@ or %g2, %lo(OLD), %g2; \ sub %g1, %g2, %g1; \ sethi %hi(BRANCH_ALWAYS), %g3; \ - srl %g1, 2, %g1; \ + sll %g1, 11, %g1; \ + srl %g1, 11 + 2, %g1; \ or %g3, %lo(BRANCH_ALWAYS), %g3; \ or %g3, %g1, %g3; \ stw %g3, [%g2]; \ -- cgit v1.2.3-18-g5258 From 221b2fb818c307e1cb47e036a1671ca554d9cd0a Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 11 Feb 2006 23:38:00 -0800 Subject: [SPARC64]: Don't expect cfg space in PCI PBM ranges on SUN4V. PCI cfg space is accessed transparently through the Hypervisor and not through direct cpu PIO operations. Signed-off-by: David S. Miller --- arch/sparc64/kernel/pci_sun4v.c | 20 +++++--------------- 1 file changed, 5 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c index 3f0e3c09f4d..699e91e3e42 100644 --- a/arch/sparc64/kernel/pci_sun4v.c +++ b/arch/sparc64/kernel/pci_sun4v.c @@ -639,9 +639,9 @@ static void pci_sun4v_resource_adjust(struct pci_dev *pdev, */ static void pci_sun4v_determine_mem_io_space(struct pci_pbm_info *pbm) { - int i, saw_cfg, saw_mem, saw_io; + int i, saw_mem, saw_io; - saw_cfg = saw_mem = saw_io = 0; + saw_mem = saw_io = 0; for (i = 0; i < pbm->num_pbm_ranges; i++) { struct linux_prom_pci_ranges *pr = &pbm->pbm_ranges[i]; unsigned long a; @@ -652,12 +652,6 @@ static void pci_sun4v_determine_mem_io_space(struct pci_pbm_info *pbm) ((unsigned long)pr->parent_phys_lo << 0UL)); switch (type) { - case 0: - /* PCI config space, 16MB */ - pbm->config_space = a; - saw_cfg = 1; - break; - case 1: /* 16-bit IO space, 16MB */ pbm->io_space.start = a; @@ -679,19 +673,15 @@ static void pci_sun4v_determine_mem_io_space(struct pci_pbm_info *pbm) }; } - if (!saw_cfg || !saw_io || !saw_mem) { + if (!saw_io || !saw_mem) { prom_printf("%s: Fatal error, missing %s PBM range.\n", pbm->name, - ((!saw_cfg ? - "CFG" : - (!saw_io ? - "IO" : "MEM")))); + (!saw_io ? "IO" : "MEM")); prom_halt(); } - printk("%s: PCI CFG[%lx] IO[%lx] MEM[%lx]\n", + printk("%s: PCI IO[%lx] MEM[%lx]\n", pbm->name, - pbm->config_space, pbm->io_space.start, pbm->mem_space.start); } -- cgit v1.2.3-18-g5258 From ff02e0d26f139ad95ec3a7e94f88faccaa180dff Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 12 Feb 2006 17:07:51 -0800 Subject: [SPARC64]: Move PTE field definitions back into asm/pgtable.h Signed-off-by: David S. Miller --- arch/sparc64/mm/init.c | 84 -------------------------------------------------- 1 file changed, 84 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 9c2fc239f3e..81f9f4bffaf 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -1334,90 +1334,6 @@ void free_initrd_mem(unsigned long start, unsigned long end) } #endif -/* SUN4U pte bits... */ -#define _PAGE_SZ4MB_4U 0x6000000000000000 /* 4MB Page */ -#define _PAGE_SZ512K_4U 0x4000000000000000 /* 512K Page */ -#define _PAGE_SZ64K_4U 0x2000000000000000 /* 64K Page */ -#define _PAGE_SZ8K_4U 0x0000000000000000 /* 8K Page */ -#define _PAGE_NFO_4U 0x1000000000000000 /* No Fault Only */ -#define _PAGE_IE_4U 0x0800000000000000 /* Invert Endianness */ -#define _PAGE_SOFT2_4U 0x07FC000000000000 /* Software bits, set 2 */ -#define _PAGE_RES1_4U 0x0002000000000000 /* Reserved */ -#define _PAGE_SZ32MB_4U 0x0001000000000000 /* (Panther) 32MB page */ -#define _PAGE_SZ256MB_4U 0x2001000000000000 /* (Panther) 256MB page */ -#define _PAGE_SN_4U 0x0000800000000000 /* (Cheetah) Snoop */ -#define _PAGE_RES2_4U 0x0000780000000000 /* Reserved */ -#define _PAGE_PADDR_4U 0x000007FFFFFFE000 /* (Cheetah) paddr[42:13] */ -#define _PAGE_SOFT_4U 0x0000000000001F80 /* Software bits: */ -#define _PAGE_EXEC_4U 0x0000000000001000 /* Executable SW bit */ -#define _PAGE_MODIFIED_4U 0x0000000000000800 /* Modified (dirty) */ -#define _PAGE_FILE_4U 0x0000000000000800 /* Pagecache page */ -#define _PAGE_ACCESSED_4U 0x0000000000000400 /* Accessed (ref'd) */ -#define _PAGE_READ_4U 0x0000000000000200 /* Readable SW Bit */ -#define _PAGE_WRITE_4U 0x0000000000000100 /* Writable SW Bit */ -#define _PAGE_PRESENT_4U 0x0000000000000080 /* Present */ -#define _PAGE_L_4U 0x0000000000000040 /* Locked TTE */ -#define _PAGE_CP_4U 0x0000000000000020 /* Cacheable in P-Cache */ -#define _PAGE_CV_4U 0x0000000000000010 /* Cacheable in V-Cache */ -#define _PAGE_E_4U 0x0000000000000008 /* side-Effect */ -#define _PAGE_P_4U 0x0000000000000004 /* Privileged Page */ -#define _PAGE_W_4U 0x0000000000000002 /* Writable */ - -/* SUN4V pte bits... */ -#define _PAGE_NFO_4V 0x4000000000000000 /* No Fault Only */ -#define _PAGE_SOFT2_4V 0x3F00000000000000 /* Software bits, set 2 */ -#define _PAGE_MODIFIED_4V 0x2000000000000000 /* Modified (dirty) */ -#define _PAGE_ACCESSED_4V 0x1000000000000000 /* Accessed (ref'd) */ -#define _PAGE_READ_4V 0x0800000000000000 /* Readable SW Bit */ -#define _PAGE_WRITE_4V 0x0400000000000000 /* Writable SW Bit */ -#define _PAGE_PADDR_4V 0x00FFFFFFFFFFE000 /* paddr[55:13] */ -#define _PAGE_IE_4V 0x0000000000001000 /* Invert Endianness */ -#define _PAGE_E_4V 0x0000000000000800 /* side-Effect */ -#define _PAGE_CP_4V 0x0000000000000400 /* Cacheable in P-Cache */ -#define _PAGE_CV_4V 0x0000000000000200 /* Cacheable in V-Cache */ -#define _PAGE_P_4V 0x0000000000000100 /* Privileged Page */ -#define _PAGE_EXEC_4V 0x0000000000000080 /* Executable Page */ -#define _PAGE_W_4V 0x0000000000000040 /* Writable */ -#define _PAGE_SOFT_4V 0x0000000000000030 /* Software bits */ -#define _PAGE_FILE_4V 0x0000000000000020 /* Pagecache page */ -#define _PAGE_PRESENT_4V 0x0000000000000010 /* Present */ -#define _PAGE_RESV_4V 0x0000000000000008 /* Reserved */ -#define _PAGE_SZ16GB_4V 0x0000000000000007 /* 16GB Page */ -#define _PAGE_SZ2GB_4V 0x0000000000000006 /* 2GB Page */ -#define _PAGE_SZ256MB_4V 0x0000000000000005 /* 256MB Page */ -#define _PAGE_SZ32MB_4V 0x0000000000000004 /* 32MB Page */ -#define _PAGE_SZ4MB_4V 0x0000000000000003 /* 4MB Page */ -#define _PAGE_SZ512K_4V 0x0000000000000002 /* 512K Page */ -#define _PAGE_SZ64K_4V 0x0000000000000001 /* 64K Page */ -#define _PAGE_SZ8K_4V 0x0000000000000000 /* 8K Page */ - -#if PAGE_SHIFT == 13 -#define _PAGE_SZBITS_4U _PAGE_SZ8K_4U -#define _PAGE_SZBITS_4V _PAGE_SZ8K_4V -#elif PAGE_SHIFT == 16 -#define _PAGE_SZBITS_4U _PAGE_SZ64K_4U -#define _PAGE_SZBITS_4V _PAGE_SZ64K_4V -#elif PAGE_SHIFT == 19 -#define _PAGE_SZBITS_4U _PAGE_SZ512K_4U -#define _PAGE_SZBITS_4V _PAGE_SZ512K_4V -#elif PAGE_SHIFT == 22 -#define _PAGE_SZBITS_4U _PAGE_SZ4MB_4U -#define _PAGE_SZBITS_4V _PAGE_SZ4MB_4V -#else -#error Wrong PAGE_SHIFT specified -#endif - -#if defined(CONFIG_HUGETLB_PAGE_SIZE_4MB) -#define _PAGE_SZHUGE_4U _PAGE_SZ4MB_4U -#define _PAGE_SZHUGE_4V _PAGE_SZ4MB_4V -#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512K) -#define _PAGE_SZHUGE_4U _PAGE_SZ512K_4U -#define _PAGE_SZHUGE_4V _PAGE_SZ512K_4V -#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64K) -#define _PAGE_SZHUGE_4U _PAGE_SZ64K_4U -#define _PAGE_SZHUGE_4V _PAGE_SZ64K_4V -#endif - #define _PAGE_CACHE_4U (_PAGE_CP_4U | _PAGE_CV_4U) #define _PAGE_CACHE_4V (_PAGE_CP_4V | _PAGE_CV_4V) #define __DIRTY_BITS_4U (_PAGE_MODIFIED_4U | _PAGE_WRITE_4U | _PAGE_W_4U) -- cgit v1.2.3-18-g5258 From cf627156c450cd5a0741b31f55181db3400d4887 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 12 Feb 2006 21:10:07 -0800 Subject: [SPARC64]: Use inline patching for critical PTE operations. This handles the SUN4U vs SUN4V PTE layout differences with near zero performance cost. Signed-off-by: David S. Miller --- arch/sparc64/mm/init.c | 211 +------------------------------------------------ 1 file changed, 3 insertions(+), 208 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 81f9f4bffaf..6f860c39db8 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -1502,217 +1502,12 @@ unsigned long pte_sz_bits(unsigned long sz) pte_t mk_pte_io(unsigned long page, pgprot_t prot, int space, unsigned long page_size) { pte_t pte; - if (tlb_type == hypervisor) { - pte_val(pte) = (((page) | pgprot_val(prot) | _PAGE_E_4V) & - ~(unsigned long)_PAGE_CACHE_4V); - } else { - pte_val(pte) = (((page) | pgprot_val(prot) | _PAGE_E_4U) & - ~(unsigned long)_PAGE_CACHE_4U); - } + + pte_val(pte) = page | pgprot_val(pgprot_noncached(prot)); pte_val(pte) |= (((unsigned long)space) << 32); pte_val(pte) |= pte_sz_bits(page_size); - return pte; -} - -unsigned long pte_present(pte_t pte) -{ - return (pte_val(pte) & - ((tlb_type == hypervisor) ? - _PAGE_PRESENT_4V : _PAGE_PRESENT_4U)); -} - -unsigned long pte_file(pte_t pte) -{ - return (pte_val(pte) & - ((tlb_type == hypervisor) ? - _PAGE_FILE_4V : _PAGE_FILE_4U)); -} - -unsigned long pte_read(pte_t pte) -{ - return (pte_val(pte) & - ((tlb_type == hypervisor) ? - _PAGE_READ_4V : _PAGE_READ_4U)); -} - -unsigned long pte_exec(pte_t pte) -{ - return (pte_val(pte) & - ((tlb_type == hypervisor) ? - _PAGE_EXEC_4V : _PAGE_EXEC_4U)); -} - -unsigned long pte_write(pte_t pte) -{ - return (pte_val(pte) & - ((tlb_type == hypervisor) ? - _PAGE_WRITE_4V : _PAGE_WRITE_4U)); -} - -unsigned long pte_dirty(pte_t pte) -{ - return (pte_val(pte) & - ((tlb_type == hypervisor) ? - _PAGE_MODIFIED_4V : _PAGE_MODIFIED_4U)); -} - -unsigned long pte_young(pte_t pte) -{ - return (pte_val(pte) & - ((tlb_type == hypervisor) ? - _PAGE_ACCESSED_4V : _PAGE_ACCESSED_4U)); -} -pte_t pte_wrprotect(pte_t pte) -{ - unsigned long mask = _PAGE_WRITE_4U | _PAGE_W_4U; - - if (tlb_type == hypervisor) - mask = _PAGE_WRITE_4V | _PAGE_W_4V; - - return __pte(pte_val(pte) & ~mask); -} - -pte_t pte_rdprotect(pte_t pte) -{ - unsigned long mask = _PAGE_R | _PAGE_READ_4U; - - if (tlb_type == hypervisor) - mask = _PAGE_R | _PAGE_READ_4V; - - return __pte(pte_val(pte) & ~mask); -} - -pte_t pte_mkclean(pte_t pte) -{ - unsigned long mask = _PAGE_MODIFIED_4U | _PAGE_W_4U; - - if (tlb_type == hypervisor) - mask = _PAGE_MODIFIED_4V | _PAGE_W_4V; - - return __pte(pte_val(pte) & ~mask); -} - -pte_t pte_mkold(pte_t pte) -{ - unsigned long mask = _PAGE_R | _PAGE_ACCESSED_4U; - - if (tlb_type == hypervisor) - mask = _PAGE_R | _PAGE_ACCESSED_4V; - - return __pte(pte_val(pte) & ~mask); -} - -pte_t pte_mkyoung(pte_t pte) -{ - unsigned long mask = _PAGE_R | _PAGE_ACCESSED_4U; - - if (tlb_type == hypervisor) - mask = _PAGE_R | _PAGE_ACCESSED_4V; - - return __pte(pte_val(pte) | mask); -} - -pte_t pte_mkwrite(pte_t pte) -{ - unsigned long mask = _PAGE_WRITE_4U; - - if (tlb_type == hypervisor) - mask = _PAGE_WRITE_4V; - - return __pte(pte_val(pte) | mask); -} - -pte_t pte_mkdirty(pte_t pte) -{ - unsigned long mask = _PAGE_MODIFIED_4U | _PAGE_W_4U; - - if (tlb_type == hypervisor) - mask = _PAGE_MODIFIED_4V | _PAGE_W_4V; - - return __pte(pte_val(pte) | mask); -} - -pte_t pte_mkhuge(pte_t pte) -{ - unsigned long mask = _PAGE_SZHUGE_4U; - - if (tlb_type == hypervisor) - mask = _PAGE_SZHUGE_4V; - - return __pte(pte_val(pte) | mask); -} - -pte_t pgoff_to_pte(unsigned long off) -{ - unsigned long bit = _PAGE_FILE_4U; - - if (tlb_type == hypervisor) - bit = _PAGE_FILE_4V; - - return __pte((off << PAGE_SHIFT) | bit); -} - -pgprot_t pgprot_noncached(pgprot_t prot) -{ - unsigned long val = pgprot_val(prot); - unsigned long off = _PAGE_CP_4U | _PAGE_CV_4U; - unsigned long on = _PAGE_E_4U; - - if (tlb_type == hypervisor) { - off = _PAGE_CP_4V | _PAGE_CV_4V; - on = _PAGE_E_4V; - } - - return __pgprot((val & ~off) | on); -} - -pte_t pfn_pte(unsigned long pfn, pgprot_t prot) -{ - unsigned long sz_bits = _PAGE_SZBITS_4U; - - if (tlb_type == hypervisor) - sz_bits = _PAGE_SZBITS_4V; - - return __pte((pfn << PAGE_SHIFT) | pgprot_val(prot) | sz_bits); -} - -unsigned long pte_pfn(pte_t pte) -{ - unsigned long mask = _PAGE_PADDR_4U; - - if (tlb_type == hypervisor) - mask = _PAGE_PADDR_4V; - - return (pte_val(pte) & mask) >> PAGE_SHIFT; -} - -pte_t pte_modify(pte_t orig_pte, pgprot_t new_prot) -{ - unsigned long preserve_mask; - unsigned long val; - - preserve_mask = (_PAGE_PADDR_4U | - _PAGE_MODIFIED_4U | - _PAGE_ACCESSED_4U | - _PAGE_CP_4U | - _PAGE_CV_4U | - _PAGE_E_4U | - _PAGE_PRESENT_4U | - _PAGE_SZBITS_4U); - if (tlb_type == hypervisor) - preserve_mask = (_PAGE_PADDR_4V | - _PAGE_MODIFIED_4V | - _PAGE_ACCESSED_4V | - _PAGE_CP_4V | - _PAGE_CV_4V | - _PAGE_E_4V | - _PAGE_PRESENT_4V | - _PAGE_SZBITS_4V); - - val = (pte_val(orig_pte) & preserve_mask); - - return __pte(val | (pgprot_val(new_prot) & ~preserve_mask)); + return pte; } static unsigned long kern_large_tte(unsigned long paddr) -- cgit v1.2.3-18-g5258 From 3833789bb2e15eb85fad296d8fb40f1437925645 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 12 Feb 2006 22:06:53 -0800 Subject: [SPARC64]: PCI-SUN4V fixes. Clear top 8-bits of physical addresses in "ranges" property. This gives the actual physical address. Detect PBM-A vs. PBM-B by checking bit 0x40 of the devhandle. Signed-off-by: David S. Miller --- arch/sparc64/kernel/pci_sun4v.c | 41 +++++++++++++++++++++++++++++++++-------- 1 file changed, 33 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c index 699e91e3e42..19a07f0115c 100644 --- a/arch/sparc64/kernel/pci_sun4v.c +++ b/arch/sparc64/kernel/pci_sun4v.c @@ -776,22 +776,22 @@ static void pci_sun4v_iommu_init(struct pci_pbm_info *pbm) probe_existing_entries(pbm, iommu); } -static void pci_sun4v_pbm_init(struct pci_controller_info *p, int prom_node) +static void pci_sun4v_pbm_init(struct pci_controller_info *p, int prom_node, unsigned int devhandle) { struct pci_pbm_info *pbm; - struct linux_prom64_registers regs; unsigned int busrange[2]; - int err; + int err, i; - /* XXX */ - pbm = &p->pbm_A; + if (devhandle & 0x40) + pbm = &p->pbm_B; + else + pbm = &p->pbm_A; pbm->parent = p; pbm->prom_node = prom_node; pbm->pci_first_slot = 1; - prom_getproperty(prom_node, "reg", (char *)®s, sizeof(regs)); - pbm->devhandle = (regs.phys_addr >> 32UL) & 0x0fffffff; + pbm->devhandle = devhandle; sprintf(pbm->name, "SUN4V-PCI%d PBM%c", p->index, (pbm == &p->pbm_A ? 'A' : 'B')); @@ -813,6 +813,12 @@ static void pci_sun4v_pbm_init(struct pci_controller_info *p, int prom_node) pbm->num_pbm_ranges = (err / sizeof(struct linux_prom_pci_ranges)); + /* Mask out the top 8 bits of the ranges, leaving the real + * physical address. + */ + for (i = 0; i < pbm->num_pbm_ranges; i++) + pbm->pbm_ranges[i].parent_phys_hi &= 0x0fffffff; + pci_sun4v_determine_mem_io_space(pbm); pbm_register_toplevel_resources(p, pbm); @@ -851,6 +857,25 @@ void sun4v_pci_init(int node, char *model_name) { struct pci_controller_info *p; struct pci_iommu *iommu; + struct linux_prom64_registers regs; + unsigned int devhandle; + + prom_getproperty(node, "reg", (char *)®s, sizeof(regs)); + devhandle = (regs.phys_addr >> 32UL) & 0x0fffffff;; + + for (p = pci_controller_root; p; p = p->next) { + struct pci_pbm_info *pbm; + + if (p->pbm_A.prom_node && p->pbm_B.prom_node) + continue; + + pbm = (p->pbm_A.prom_node ? + &p->pbm_A : + &p->pbm_B); + + if (pbm->devhandle == (devhandle ^ 0x40)) + pci_sun4v_pbm_init(p, node, devhandle); + } p = kmalloc(sizeof(struct pci_controller_info), GFP_ATOMIC); if (!p) { @@ -892,7 +917,7 @@ void sun4v_pci_init(int node, char *model_name) */ pci_memspace_mask = 0x7fffffffUL; - pci_sun4v_pbm_init(p, node); + pci_sun4v_pbm_init(p, node, devhandle); prom_printf("sun4v_pci_init: Implement me.\n"); prom_halt(); -- cgit v1.2.3-18-g5258 From c26092675020ff495a16dd635bf1733215325540 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 12 Feb 2006 22:18:52 -0800 Subject: [SPARC64]: Implement basic pci_sun4v_scan_bus(). Signed-off-by: David S. Miller --- arch/sparc64/kernel/pci_sun4v.c | 49 ++++++++++++++++++++++++++++++++++++++--- 1 file changed, 46 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c index 19a07f0115c..59e660d849a 100644 --- a/arch/sparc64/kernel/pci_sun4v.c +++ b/arch/sparc64/kernel/pci_sun4v.c @@ -566,9 +566,50 @@ static struct pci_ops pci_sun4v_ops = { }; +static void pbm_scan_bus(struct pci_controller_info *p, + struct pci_pbm_info *pbm) +{ + struct pcidev_cookie *cookie = kmalloc(sizeof(*cookie), GFP_KERNEL); + + if (!cookie) { + prom_printf("%s: Critical allocation failure.\n", pbm->name); + prom_halt(); + } + + /* All we care about is the PBM. */ + memset(cookie, 0, sizeof(*cookie)); + cookie->pbm = pbm; + + pbm->pci_bus = pci_scan_bus(pbm->pci_first_busno, + p->pci_ops, + pbm); + pci_fixup_host_bridge_self(pbm->pci_bus); + pbm->pci_bus->self->sysdata = cookie; + + pci_fill_in_pbm_cookies(pbm->pci_bus, pbm, pbm->prom_node); + pci_record_assignments(pbm, pbm->pci_bus); + pci_assign_unassigned(pbm, pbm->pci_bus); + pci_fixup_irq(pbm, pbm->pci_bus); + pci_determine_66mhz_disposition(pbm, pbm->pci_bus); + pci_setup_busmastering(pbm, pbm->pci_bus); +} + static void pci_sun4v_scan_bus(struct pci_controller_info *p) { - /* XXX Implement me! XXX */ + if (p->pbm_A.prom_node) { + p->pbm_A.is_66mhz_capable = + prom_getbool(p->pbm_A.prom_node, "66mhz-capable"); + + pbm_scan_bus(p, &p->pbm_A); + } + if (p->pbm_B.prom_node) { + p->pbm_B.is_66mhz_capable = + prom_getbool(p->pbm_B.prom_node, "66mhz-capable"); + + pbm_scan_bus(p, &p->pbm_B); + } + + /* XXX register error interrupt handlers XXX */ } static unsigned int pci_sun4v_irq_build(struct pci_pbm_info *pbm, @@ -579,7 +620,6 @@ static unsigned int pci_sun4v_irq_build(struct pci_pbm_info *pbm, return 0; } -/* XXX correct? XXX */ static void pci_sun4v_base_address_update(struct pci_dev *pdev, int resource) { struct pcidev_cookie *pcp = pdev->sysdata; @@ -598,6 +638,7 @@ static void pci_sun4v_base_address_update(struct pci_dev *pdev, int resource) return; } + /* XXX 64-bit MEM handling is not %100 correct... XXX */ is_64bit = 0; if (res->flags & IORESOURCE_IO) root = &pbm->io_space; @@ -625,7 +666,6 @@ static void pci_sun4v_base_address_update(struct pci_dev *pdev, int resource) pci_write_config_dword(pdev, where + 4, 0); } -/* XXX correct? XXX */ static void pci_sun4v_resource_adjust(struct pci_dev *pdev, struct resource *res, struct resource *root) @@ -668,6 +708,9 @@ static void pci_sun4v_determine_mem_io_space(struct pci_pbm_info *pbm) saw_mem = 1; break; + case 3: + /* XXX 64-bit MEM handling XXX */ + default: break; }; -- cgit v1.2.3-18-g5258 From 0b522497a176f222ae4cf7e6733a5357352224b2 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 12 Feb 2006 22:29:36 -0800 Subject: [SPARC64]: Missing 'return' statement in sun4v_pci_init(). Signed-off-by: David S. Miller --- arch/sparc64/kernel/pci_sun4v.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c index 59e660d849a..7055616e083 100644 --- a/arch/sparc64/kernel/pci_sun4v.c +++ b/arch/sparc64/kernel/pci_sun4v.c @@ -916,8 +916,10 @@ void sun4v_pci_init(int node, char *model_name) &p->pbm_A : &p->pbm_B); - if (pbm->devhandle == (devhandle ^ 0x40)) + if (pbm->devhandle == (devhandle ^ 0x40)) { pci_sun4v_pbm_init(p, node, devhandle); + return; + } } p = kmalloc(sizeof(struct pci_controller_info), GFP_ATOMIC); @@ -961,7 +963,4 @@ void sun4v_pci_init(int node, char *model_name) pci_memspace_mask = 0x7fffffffUL; pci_sun4v_pbm_init(p, node, devhandle); - - prom_printf("sun4v_pci_init: Implement me.\n"); - prom_halt(); } -- cgit v1.2.3-18-g5258 From 059833eb817fec3a5a7f62fba9592749c4cebc73 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 12 Feb 2006 23:49:18 -0800 Subject: [SPARC64]: Range check bus number in SUN4V PCI controller driver. It has to be somewhere in the range from pbm->pci_first_busno to pbm->pci_last_busno, inclusive. Signed-off-by: David S. Miller --- arch/sparc64/kernel/pci_sun4v.c | 33 ++++++++++++++++++++++++--------- 1 file changed, 24 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c index 7055616e083..dc79b748fea 100644 --- a/arch/sparc64/kernel/pci_sun4v.c +++ b/arch/sparc64/kernel/pci_sun4v.c @@ -514,19 +514,31 @@ struct pci_iommu_ops pci_sun4v_iommu_ops = { /* SUN4V PCI configuration space accessors. */ +static inline int pci_sun4v_out_of_range(struct pci_pbm_info *pbm, unsigned int bus) +{ + if (bus < pbm->pci_first_busno || + bus > pbm->pci_last_busno) + return 1; + return 0; +} + static int pci_sun4v_read_pci_cfg(struct pci_bus *bus_dev, unsigned int devfn, int where, int size, u32 *value) { struct pci_pbm_info *pbm = bus_dev->sysdata; - unsigned long devhandle = pbm->devhandle; + u32 devhandle = pbm->devhandle; unsigned int bus = bus_dev->number; unsigned int device = PCI_SLOT(devfn); unsigned int func = PCI_FUNC(devfn); unsigned long ret; - ret = pci_sun4v_config_get(devhandle, - HV_PCI_DEVICE_BUILD(bus, device, func), - where, size); + if (pci_sun4v_out_of_range(pbm, bus)) { + ret = ~0UL; + } else { + ret = pci_sun4v_config_get(devhandle, + HV_PCI_DEVICE_BUILD(bus, device, func), + where, size); + } switch (size) { case 1: *value = ret & 0xff; @@ -547,16 +559,19 @@ static int pci_sun4v_write_pci_cfg(struct pci_bus *bus_dev, unsigned int devfn, int where, int size, u32 value) { struct pci_pbm_info *pbm = bus_dev->sysdata; - unsigned long devhandle = pbm->devhandle; + u32 devhandle = pbm->devhandle; unsigned int bus = bus_dev->number; unsigned int device = PCI_SLOT(devfn); unsigned int func = PCI_FUNC(devfn); unsigned long ret; - ret = pci_sun4v_config_put(devhandle, - HV_PCI_DEVICE_BUILD(bus, device, func), - where, size, value); - + if (pci_sun4v_out_of_range(pbm, bus)) { + /* Do nothing. */ + } else { + ret = pci_sun4v_config_put(devhandle, + HV_PCI_DEVICE_BUILD(bus, device, func), + where, size, value); + } return PCIBIOS_SUCCESSFUL; } -- cgit v1.2.3-18-g5258 From 85dfa19ba92f88fa1c1482f655c7247119dfdcd5 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 13 Feb 2006 00:02:16 -0800 Subject: [SPARC64]: Move devino_to_sysino out of pci_sun4v_asm.S It is not PCI specific, it is for all system interrupts. Signed-off-by: David S. Miller --- arch/sparc64/kernel/entry.S | 12 ++++++++++++ arch/sparc64/kernel/pci_sun4v.h | 2 -- arch/sparc64/kernel/pci_sun4v_asm.S | 12 ------------ 3 files changed, 12 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S index f51b66a1687..fa185f22705 100644 --- a/arch/sparc64/kernel/entry.S +++ b/arch/sparc64/kernel/entry.S @@ -1695,3 +1695,15 @@ hard_smp_processor_id: retl nop #endif + + /* %o0: devhandle + * %o1: devino + * + * returns %o0: sysino + */ + .globl pci_sun4v_devino_to_sysino +sun4v_devino_to_sysino: + mov HV_FAST_INTR_DEVINO2SYSINO, %o5 + ta HV_FAST_TRAP + retl + mov %o1, %o0 diff --git a/arch/sparc64/kernel/pci_sun4v.h b/arch/sparc64/kernel/pci_sun4v.h index 00322ed0cf8..88f199e11a7 100644 --- a/arch/sparc64/kernel/pci_sun4v.h +++ b/arch/sparc64/kernel/pci_sun4v.h @@ -6,8 +6,6 @@ #ifndef _PCI_SUN4V_H #define _PCI_SUN4V_H -extern unsigned long pci_sun4v_devino_to_sysino(unsigned long devhandle, - unsigned long deino); extern unsigned long pci_sun4v_iommu_map(unsigned long devhandle, unsigned long tsbid, unsigned long num_ttes, diff --git a/arch/sparc64/kernel/pci_sun4v_asm.S b/arch/sparc64/kernel/pci_sun4v_asm.S index 4a12341dd5d..424db652664 100644 --- a/arch/sparc64/kernel/pci_sun4v_asm.S +++ b/arch/sparc64/kernel/pci_sun4v_asm.S @@ -5,18 +5,6 @@ #include - /* %o0: devhandle - * %o1: devino - * - * returns %o0: sysino - */ - .globl pci_sun4v_devino_to_sysino -pci_sun4v_devino_to_sysino: - mov HV_FAST_INTR_DEVINO2SYSINO, %o5 - ta HV_FAST_TRAP - retl - mov %o1, %o0 - /* %o0: devhandle * %o1: tsbid * %o2: num ttes -- cgit v1.2.3-18-g5258 From 6c0f402f6cc62314ef83b975f3430350dcb6055f Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 13 Feb 2006 00:23:32 -0800 Subject: [SPARC64]: Implement rest of generic interrupt hypervisor calls. Signed-off-by: David S. Miller --- arch/sparc64/kernel/entry.S | 66 ++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 65 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S index fa185f22705..a2842a72f8e 100644 --- a/arch/sparc64/kernel/entry.S +++ b/arch/sparc64/kernel/entry.S @@ -1701,9 +1701,73 @@ hard_smp_processor_id: * * returns %o0: sysino */ - .globl pci_sun4v_devino_to_sysino + .globl sun4v_devino_to_sysino sun4v_devino_to_sysino: mov HV_FAST_INTR_DEVINO2SYSINO, %o5 ta HV_FAST_TRAP retl mov %o1, %o0 + + /* %o0: sysino + * + * returns %o0: intr_enabled (HV_INTR_{DISABLED,ENABLED}) + */ + .globl sun4v_intr_getenabled +sun4v_intr_getenabled: + mov HV_FAST_INTR_GETENABLED, %o5 + ta HV_FAST_TRAP + retl + mov %o1, %o0 + + /* %o0: sysino + * %o1: intr_enabled (HV_INTR_{DISABLED,ENABLED}) + */ + .globl sun4v_intr_setenabled +sun4v_intr_setenabled: + mov HV_FAST_INTR_SETENABLED, %o5 + ta HV_FAST_TRAP + retl + nop + + /* %o0: sysino + * + * returns %o0: intr_state (HV_INTR_STATE_*) + */ + .globl sun4v_intr_getstate +sun4v_intr_getstate: + mov HV_FAST_INTR_GETSTATE, %o5 + ta HV_FAST_TRAP + retl + mov %o1, %o0 + + /* %o0: sysino + * %o1: intr_state (HV_INTR_STATE_*) + */ + .globl sun4v_intr_setstate +sun4v_intr_setstate: + mov HV_FAST_INTR_SETSTATE, %o5 + ta HV_FAST_TRAP + retl + nop + + /* %o0: sysino + * + * returns %o0: cpuid + */ + .globl sun4v_intr_gettarget +sun4v_intr_gettarget: + mov HV_FAST_INTR_GETTARGET, %o5 + ta HV_FAST_TRAP + retl + mov %o1, %o0 + + /* %o0: sysino + * %o1: cpuid + */ + .globl sun4v_intr_settarget +sun4v_intr_settarget: + mov HV_FAST_INTR_SETTARGET, %o5 + ta HV_FAST_TRAP + retl + nop + -- cgit v1.2.3-18-g5258 From bf941d6cd62aa2022f0887e25e3d02c389b0bf9b Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 13 Feb 2006 18:07:45 -0800 Subject: [SPARC64]: Log faulting vaddr when bogus kernel PC detected. Signed-off-by: David S. Miller --- arch/sparc64/mm/fault.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/mm/fault.c b/arch/sparc64/mm/fault.c index 439a53c1e56..b97bd054aad 100644 --- a/arch/sparc64/mm/fault.c +++ b/arch/sparc64/mm/fault.c @@ -91,12 +91,13 @@ static void __kprobes unhandled_fault(unsigned long address, die_if_kernel("Oops", regs); } -static void bad_kernel_pc(struct pt_regs *regs) +static void bad_kernel_pc(struct pt_regs *regs, unsigned long vaddr) { unsigned long *ksp; printk(KERN_CRIT "OOPS: Bogus kernel PC [%016lx] in fault handler\n", regs->tpc); + printk(KERN_CRIT "OOPS: Fault was to vaddr[%lx]\n", vaddr); __asm__("mov %%sp, %0" : "=r" (ksp)); show_stack(current, ksp); unhandled_fault(regs->tpc, current, regs); @@ -280,7 +281,7 @@ asmlinkage void __kprobes do_sparc64_fault(struct pt_regs *regs) (tpc >= MODULES_VADDR && tpc < MODULES_END)) { /* Valid, no problems... */ } else { - bad_kernel_pc(regs); + bad_kernel_pc(regs, address); return; } } -- cgit v1.2.3-18-g5258 From 10804828fd06a43ce964e9d9852332e7ff1507b1 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 13 Feb 2006 18:09:44 -0800 Subject: [SPARC64]: More SUN4V PCI work. Get bus range from child of PCI controller root nexus. This is actually a hack, but the PCI-E bridge sitting at the top of the PCI tree responds to PCI config cycles for every device number, so best to just ignore it for now. Preliminary PCI irq routing, needs lots of work. Signed-off-by: David S. Miller --- arch/sparc64/kernel/pci_sun4v.c | 116 +++++++++++++++++++++++++++++++++++----- 1 file changed, 102 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c index dc79b748fea..5174346ce35 100644 --- a/arch/sparc64/kernel/pci_sun4v.c +++ b/arch/sparc64/kernel/pci_sun4v.c @@ -538,6 +538,12 @@ static int pci_sun4v_read_pci_cfg(struct pci_bus *bus_dev, unsigned int devfn, ret = pci_sun4v_config_get(devhandle, HV_PCI_DEVICE_BUILD(bus, device, func), where, size); +#if 0 + printk("read_pci_cfg: devh[%x] device[%08x] where[%x] sz[%d] " + "== [%016lx]\n", + devhandle, HV_PCI_DEVICE_BUILD(bus, device, func), + where, size, ret); +#endif } switch (size) { case 1: @@ -571,6 +577,12 @@ static int pci_sun4v_write_pci_cfg(struct pci_bus *bus_dev, unsigned int devfn, ret = pci_sun4v_config_put(devhandle, HV_PCI_DEVICE_BUILD(bus, device, func), where, size, value); +#if 0 + printk("write_pci_cfg: devh[%x] device[%08x] where[%x] sz[%d] " + "val[%08x] == [%016lx]\n", + devhandle, HV_PCI_DEVICE_BUILD(bus, device, func), + where, size, value, ret); +#endif } return PCIBIOS_SUCCESSFUL; } @@ -598,10 +610,13 @@ static void pbm_scan_bus(struct pci_controller_info *p, pbm->pci_bus = pci_scan_bus(pbm->pci_first_busno, p->pci_ops, pbm); +#if 0 pci_fixup_host_bridge_self(pbm->pci_bus); pbm->pci_bus->self->sysdata = cookie; +#endif - pci_fill_in_pbm_cookies(pbm->pci_bus, pbm, pbm->prom_node); + pci_fill_in_pbm_cookies(pbm->pci_bus, pbm, + prom_getchild(pbm->prom_node)); pci_record_assignments(pbm, pbm->pci_bus); pci_assign_unassigned(pbm, pbm->pci_bus); pci_fixup_irq(pbm, pbm->pci_bus); @@ -631,8 +646,65 @@ static unsigned int pci_sun4v_irq_build(struct pci_pbm_info *pbm, struct pci_dev *pdev, unsigned int ino) { - /* XXX Implement me! XXX */ - return 0; + struct ino_bucket *bucket; + unsigned long sysino; + u32 devhandle = pbm->devhandle; + int pil; + + sysino = sun4v_devino_to_sysino(devhandle, ino); + + printk(KERN_INFO "pci_irq_buld: Mapping ( devh[%08x] ino[%08x] ) " + "--> sysino[%016lx]\n", devhandle, ino, sysino); + + pil = 4; + if (pdev) { + switch ((pdev->class >> 16) & 0xff) { + case PCI_BASE_CLASS_STORAGE: + pil = 4; + break; + + case PCI_BASE_CLASS_NETWORK: + pil = 6; + break; + + case PCI_BASE_CLASS_DISPLAY: + pil = 9; + break; + + case PCI_BASE_CLASS_MULTIMEDIA: + case PCI_BASE_CLASS_MEMORY: + case PCI_BASE_CLASS_BRIDGE: + case PCI_BASE_CLASS_SERIAL: + pil = 10; + break; + + default: + pil = 4; + break; + }; + } + BUG_ON(PIL_RESERVED(pil)); + + bucket = &ivector_table[sysino]; + + /* Catch accidental accesses to these things. IMAP/ICLR handling + * is done by hypervisor calls on sun4v platforms, not by direct + * register accesses. + */ + bucket->imap = ~0UL; + bucket->iclr = ~0UL; + + bucket->pil = pil; + bucket->flags = IBF_PCI; + + bucket->irq_info = kmalloc(sizeof(struct irq_desc), GFP_ATOMIC); + if (!bucket->irq_info) { + prom_printf("IRQ: Error, kmalloc(irq_desc) failed.\n"); + prom_halt(); + } + memset(bucket->irq_info, 0, sizeof(struct irq_desc)); + + return __irq(bucket); } static void pci_sun4v_base_address_update(struct pci_dev *pdev, int resource) @@ -834,10 +906,35 @@ static void pci_sun4v_iommu_init(struct pci_pbm_info *pbm) probe_existing_entries(pbm, iommu); } +/* Don't get this from the root nexus, get it from the "pci@0" node below. */ +static void pci_sun4v_get_bus_range(struct pci_pbm_info *pbm) +{ + unsigned int busrange[2]; + int prom_node = pbm->prom_node; + int err; + + prom_node = prom_getchild(prom_node); + if (prom_node == 0) { + prom_printf("%s: Fatal error, no child OBP node.\n", pbm->name); + prom_halt(); + } + + err = prom_getproperty(prom_node, "bus-range", + (char *)&busrange[0], + sizeof(busrange)); + if (err == 0 || err == -1) { + prom_printf("%s: Fatal error, no bus-range.\n", pbm->name); + prom_halt(); + } + + pbm->pci_first_busno = busrange[0]; + pbm->pci_last_busno = busrange[1]; + +} + static void pci_sun4v_pbm_init(struct pci_controller_info *p, int prom_node, unsigned int devhandle) { struct pci_pbm_info *pbm; - unsigned int busrange[2]; int err, i; if (devhandle & 0x40) @@ -898,16 +995,7 @@ static void pci_sun4v_pbm_init(struct pci_controller_info *p, int prom_node, uns memset(&pbm->pbm_intmask, 0, sizeof(pbm->pbm_intmask)); } - err = prom_getproperty(prom_node, "bus-range", - (char *)&busrange[0], - sizeof(busrange)); - if (err == 0 || err == -1) { - prom_printf("%s: Fatal error, no bus-range.\n", pbm->name); - prom_halt(); - } - pbm->pci_first_busno = busrange[0]; - pbm->pci_last_busno = busrange[1]; - + pci_sun4v_get_bus_range(pbm); pci_sun4v_iommu_init(pbm); } -- cgit v1.2.3-18-g5258 From e3999574b48125c9bb0c95e3e9f1c696bf96c3e3 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 13 Feb 2006 18:16:10 -0800 Subject: [SPARC64]: Generic sun4v_build_irq(). Signed-off-by: David S. Miller --- arch/sparc64/kernel/irq.c | 32 ++++++++++++++++++++++++++++++++ arch/sparc64/kernel/pci_sun4v.c | 30 ++---------------------------- 2 files changed, 34 insertions(+), 28 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index 51f65054bf1..bcc889a5332 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -303,6 +303,38 @@ out: return __irq(bucket); } +unsigned int sun4v_build_irq(u32 devhandle, unsigned int devino, int pil, unsigned char flags) +{ + struct ino_bucket *bucket; + unsigned long sysino; + + sysino = sun4v_devino_to_sysino(devhandle, devino); + + printk(KERN_INFO "sun4v_irq: Mapping ( devh[%08x] devino[%08x] ) " + "--> sysino[%016lx]\n", devhandle, devino, sysino); + + bucket = &ivector_table[sysino]; + + /* Catch accidental accesses to these things. IMAP/ICLR handling + * is done by hypervisor calls on sun4v platforms, not by direct + * register accesses. + */ + bucket->imap = ~0UL; + bucket->iclr = ~0UL; + + bucket->pil = pil; + bucket->flags = flags; + + bucket->irq_info = kmalloc(sizeof(struct irq_desc), GFP_ATOMIC); + if (!bucket->irq_info) { + prom_printf("IRQ: Error, kmalloc(irq_desc) failed.\n"); + prom_halt(); + } + memset(bucket->irq_info, 0, sizeof(struct irq_desc)); + + return __irq(bucket); +} + static void atomic_bucket_insert(struct ino_bucket *bucket) { unsigned long pstate; diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c index 5174346ce35..b8846b271f9 100644 --- a/arch/sparc64/kernel/pci_sun4v.c +++ b/arch/sparc64/kernel/pci_sun4v.c @@ -644,18 +644,11 @@ static void pci_sun4v_scan_bus(struct pci_controller_info *p) static unsigned int pci_sun4v_irq_build(struct pci_pbm_info *pbm, struct pci_dev *pdev, - unsigned int ino) + unsigned int devino) { - struct ino_bucket *bucket; - unsigned long sysino; u32 devhandle = pbm->devhandle; int pil; - sysino = sun4v_devino_to_sysino(devhandle, ino); - - printk(KERN_INFO "pci_irq_buld: Mapping ( devh[%08x] ino[%08x] ) " - "--> sysino[%016lx]\n", devhandle, ino, sysino); - pil = 4; if (pdev) { switch ((pdev->class >> 16) & 0xff) { @@ -685,26 +678,7 @@ static unsigned int pci_sun4v_irq_build(struct pci_pbm_info *pbm, } BUG_ON(PIL_RESERVED(pil)); - bucket = &ivector_table[sysino]; - - /* Catch accidental accesses to these things. IMAP/ICLR handling - * is done by hypervisor calls on sun4v platforms, not by direct - * register accesses. - */ - bucket->imap = ~0UL; - bucket->iclr = ~0UL; - - bucket->pil = pil; - bucket->flags = IBF_PCI; - - bucket->irq_info = kmalloc(sizeof(struct irq_desc), GFP_ATOMIC); - if (!bucket->irq_info) { - prom_printf("IRQ: Error, kmalloc(irq_desc) failed.\n"); - prom_halt(); - } - memset(bucket->irq_info, 0, sizeof(struct irq_desc)); - - return __irq(bucket); + return sun4v_build_irq(devhandle, devino, pil, IBF_PCI); } static void pci_sun4v_base_address_update(struct pci_dev *pdev, int resource) -- cgit v1.2.3-18-g5258 From 10951ee61056a9f91c00c16746f2042672d7af7c Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 13 Feb 2006 18:22:57 -0800 Subject: [SPARC64]: Program IRQ registers correctly on sun4v. Need to use hypervisor calls instead of direct register accesses. Signed-off-by: David S. Miller --- arch/sparc64/kernel/irq.c | 71 +++++++++++++++++++++++++++++++---------------- 1 file changed, 47 insertions(+), 24 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index bcc889a5332..735b3abb85e 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -152,7 +152,10 @@ void enable_irq(unsigned int irq) preempt_disable(); if (tlb_type == hypervisor) { - /* XXX SUN4V: implement me... XXX */ + int cpu = hard_smp_processor_id(); + + sun4v_intr_settarget(irq, cpu); + sun4v_intr_setenabled(irq, HV_INTR_ENABLED); } else { if (tlb_type == cheetah || tlb_type == cheetah_plus) { unsigned long ver; @@ -210,16 +213,20 @@ void disable_irq(unsigned int irq) imap = bucket->imap; if (imap != 0UL) { - u32 tmp; + if (tlb_type == hypervisor) { + sun4v_intr_setenabled(irq, HV_INTR_DISABLED); + } else { + u32 tmp; - /* NOTE: We do not want to futz with the IRQ clear registers - * and move the state to IDLE, the SCSI code does call - * disable_irq() to assure atomicity in the queue cmd - * SCSI adapter driver code. Thus we'd lose interrupts. - */ - tmp = upa_readl(imap); - tmp &= ~IMAP_VALID; - upa_writel(tmp, imap); + /* NOTE: We do not want to futz with the IRQ clear registers + * and move the state to IDLE, the SCSI code does call + * disable_irq() to assure atomicity in the queue cmd + * SCSI adapter driver code. Thus we'd lose interrupts. + */ + tmp = upa_readl(imap); + tmp &= ~IMAP_VALID; + upa_writel(tmp, imap); + } } } @@ -257,6 +264,8 @@ unsigned int build_irq(int pil, int inofixup, unsigned long iclr, unsigned long return __irq(&pil0_dummy_bucket); } + BUG_ON(tlb_type == hypervisor); + /* RULE: Both must be specified in all other cases. */ if (iclr == 0UL || imap == 0UL) { prom_printf("Invalid build_irq %d %d %016lx %016lx\n", @@ -633,10 +642,16 @@ static void process_bucket(int irq, struct ino_bucket *bp, struct pt_regs *regs) break; } if (bp->pil != 0) { - upa_writel(ICLR_IDLE, bp->iclr); - /* Test and add entropy */ - if (random & SA_SAMPLE_RANDOM) - add_interrupt_randomness(irq); + if (tlb_type == hypervisor) { + unsigned int irq = __irq(bp); + + sun4v_intr_setstate(irq, HV_INTR_STATE_IDLE); + } else { + upa_writel(ICLR_IDLE, bp->iclr); + /* Test and add entropy */ + if (random & SA_SAMPLE_RANDOM) + add_interrupt_randomness(irq); + } } out: bp->flags &= ~IBF_INPROGRESS; @@ -769,24 +784,32 @@ static int retarget_one_irq(struct irqaction *p, int goal_cpu) { struct ino_bucket *bucket = get_ino_in_irqaction(p) + ivector_table; unsigned long imap = bucket->imap; - unsigned int tid; while (!cpu_online(goal_cpu)) { if (++goal_cpu >= NR_CPUS) goal_cpu = 0; } - if (tlb_type == cheetah || tlb_type == cheetah_plus) { - tid = goal_cpu << 26; - tid &= IMAP_AID_SAFARI; - } else if (this_is_starfire == 0) { - tid = goal_cpu << 26; - tid &= IMAP_TID_UPA; + if (tlb_type == hypervisor) { + unsigned int irq = __irq(bucket); + + sun4v_intr_settarget(irq, goal_cpu); + sun4v_intr_setenabled(irq, HV_INTR_ENABLED); } else { - tid = (starfire_translate(imap, goal_cpu) << 26); - tid &= IMAP_TID_UPA; + unsigned int tid; + + if (tlb_type == cheetah || tlb_type == cheetah_plus) { + tid = goal_cpu << 26; + tid &= IMAP_AID_SAFARI; + } else if (this_is_starfire == 0) { + tid = goal_cpu << 26; + tid &= IMAP_TID_UPA; + } else { + tid = (starfire_translate(imap, goal_cpu) << 26); + tid &= IMAP_TID_UPA; + } + upa_writel(tid | IMAP_VALID, imap); } - upa_writel(tid | IMAP_VALID, imap); do { if (++goal_cpu >= NR_CPUS) -- cgit v1.2.3-18-g5258 From d5eb4004303b4dd04ec83b926b5fc2d9ceda4b2e Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 13 Feb 2006 20:41:11 -0800 Subject: [SPARC64]: Kill spurious semicolon in sun4v_pci_init(). Signed-off-by: David S. Miller --- arch/sparc64/kernel/pci_sun4v.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c index b8846b271f9..17080a61ad6 100644 --- a/arch/sparc64/kernel/pci_sun4v.c +++ b/arch/sparc64/kernel/pci_sun4v.c @@ -981,7 +981,7 @@ void sun4v_pci_init(int node, char *model_name) unsigned int devhandle; prom_getproperty(node, "reg", (char *)®s, sizeof(regs)); - devhandle = (regs.phys_addr >> 32UL) & 0x0fffffff;; + devhandle = (regs.phys_addr >> 32UL) & 0x0fffffff; for (p = pci_controller_root; p; p = p->next) { struct pci_pbm_info *pbm; -- cgit v1.2.3-18-g5258 From e77227eb4e17591a6a511b9c0ff6e8ad7350c575 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 13 Feb 2006 20:42:16 -0800 Subject: [SPARC64]: Probe virtual-devices root node on sun4v. This is where we learn how to get the interrupts for things like the hypervisor console device. Signed-off-by: David S. Miller --- arch/sparc64/kernel/devices.c | 58 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 58 insertions(+) (limited to 'arch') diff --git a/arch/sparc64/kernel/devices.c b/arch/sparc64/kernel/devices.c index ac11d872ef7..817132826e0 100644 --- a/arch/sparc64/kernel/devices.c +++ b/arch/sparc64/kernel/devices.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include @@ -20,6 +21,7 @@ #include #include #include +#include /* Used to synchronize acceses to NatSemi SUPER I/O chip configure * operations in asm/ns87303.h @@ -29,6 +31,61 @@ DEFINE_SPINLOCK(ns87303_lock); extern void cpu_probe(void); extern void central_probe(void); +u32 sun4v_vdev_devhandle; +int sun4v_vdev_root; +struct linux_prom_pci_intmap *sun4v_vdev_intmap; +int sun4v_vdev_num_intmap; +struct linux_prom_pci_intmap sun4v_vdev_intmask; + +static void __init sun4v_virtual_device_probe(void) +{ + struct linux_prom64_registers regs; + struct linux_prom_pci_intmap *ip; + int node, sz, err; + + if (tlb_type != hypervisor) + return; + + node = prom_getchild(prom_root_node); + node = prom_searchsiblings(node, "virtual-devices"); + if (!node) { + prom_printf("SUN4V: Fatal error, no virtual-devices node.\n"); + prom_halt(); + } + + sun4v_vdev_root = node; + + prom_getproperty(node, "reg", (char *)®s, sizeof(regs)); + sun4v_vdev_devhandle = (regs.phys_addr >> 32UL) & 0x0fffffff; + + sz = sizeof(*ip) * 64; + sun4v_vdev_intmap = ip = alloc_bootmem_low_pages(sz); + if (!sun4v_vdev_intmap) { + prom_printf("SUN4V: Error, cannot allocate vdev intmap.\n"); + prom_halt(); + } + + err = prom_getproperty(node, "interrupt-map", (char *) ip, sz); + if (err == -1) { + prom_printf("SUN4V: Fatal error, no vdev interrupt-map.\n"); + prom_halt(); + } + + sun4v_vdev_num_intmap = err / sizeof(*ip); + + err = prom_getproperty(node, "interrupt-map-mask", + (char *) &sun4v_vdev_intmask, + sizeof(sun4v_vdev_intmask)); + if (err == -1) { + prom_printf("SUN4V: Fatal error, no vdev " + "interrupt-map-mask.\n"); + prom_halt(); + } + + printk("SUN4V: virtual-devices devhandle[%x]\n", + sun4v_vdev_devhandle); +} + static const char *cpu_mid_prop(void) { if (tlb_type == spitfire) @@ -177,6 +234,7 @@ void __init device_scan(void) } #endif + sun4v_virtual_device_probe(); central_probe(); cpu_probe(); -- cgit v1.2.3-18-g5258 From d5a2aa241aa0babf382d42d6033b30a5112e4c1e Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 13 Feb 2006 21:28:40 -0800 Subject: [SPARC64] sunhv: Bug fixes. Add udelay to polling console write loop, and increment the loop limit. Name the device "ttyHV" and pass that to add_preferred_console() when we're using hypervisor console. Kill sunhv_console_setup(), it's empty. Handle the case where we don't want to use hypervisor console. (ie. we have a head attached to a sun4v machine) Signed-off-by: David S. Miller --- arch/sparc64/kernel/setup.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index 4f253a0755b..06807cf95ee 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -410,6 +410,7 @@ static int __init set_preferred_console(void) * value anyways... */ serial_console = 4; + return add_preferred_console("ttyHV", 0, NULL); } else { prom_printf("Inconsistent console: " "input %d, output %d\n", -- cgit v1.2.3-18-g5258 From 87bdc367ca1a7e16c29a6bff6b1e8fe179e27f90 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 13 Feb 2006 21:36:30 -0800 Subject: [SPARC64]: Trim down sun4v IRQ translation kernel log message. Signed-off-by: David S. Miller --- arch/sparc64/kernel/irq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index 735b3abb85e..a55177e0643 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -319,8 +319,8 @@ unsigned int sun4v_build_irq(u32 devhandle, unsigned int devino, int pil, unsign sysino = sun4v_devino_to_sysino(devhandle, devino); - printk(KERN_INFO "sun4v_irq: Mapping ( devh[%08x] devino[%08x] ) " - "--> sysino[%016lx]\n", devhandle, devino, sysino); + printk(KERN_INFO "sun4v_irq: Mapping (%x:%x) --> sysino[%lx]\n", + devhandle, devino, sysino); bucket = &ivector_table[sysino]; -- cgit v1.2.3-18-g5258 From 7c8f486ae7fe90d7bb99a70a42d71c9a40688ec2 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 13 Feb 2006 21:50:27 -0800 Subject: [SPARC64]: Fix IOMMU mapping on sun4v. We should dynamically allocate the per-cpu pglist not use an in-kernel-image datum, since __pa() does not work on such addresses. Also, consistently use "u32" for devhandle. Signed-off-by: David S. Miller --- arch/sparc64/kernel/pci_sun4v.c | 76 +++++++++++++++++++++++++---------------- 1 file changed, 46 insertions(+), 30 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c index 17080a61ad6..ac311d3dbc5 100644 --- a/arch/sparc64/kernel/pci_sun4v.c +++ b/arch/sparc64/kernel/pci_sun4v.c @@ -24,10 +24,10 @@ #include "pci_sun4v.h" -#define PGLIST_NENTS 2048 +#define PGLIST_NENTS (PAGE_SIZE / sizeof(u64)) struct sun4v_pglist { - u64 pglist[PGLIST_NENTS]; + u64 *pglist; }; static DEFINE_PER_CPU(struct sun4v_pglist, iommu_pglists); @@ -83,10 +83,11 @@ static void *pci_4v_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr { struct pcidev_cookie *pcp; struct pci_iommu *iommu; - unsigned long devhandle, flags, order, first_page, npages, n; + unsigned long flags, order, first_page, npages, n; void *ret; long entry; u64 *pglist; + u32 devhandle; int cpu; size = IO_PAGE_ALIGN(size); @@ -123,7 +124,7 @@ static void *pci_4v_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr cpu = get_cpu(); - pglist = &__get_cpu_var(iommu_pglists).pglist[0]; + pglist = __get_cpu_var(iommu_pglists).pglist; for (n = 0; n < npages; n++) pglist[n] = first_page + (n * PAGE_SIZE); @@ -149,7 +150,8 @@ static void pci_4v_free_consistent(struct pci_dev *pdev, size_t size, void *cpu, { struct pcidev_cookie *pcp; struct pci_iommu *iommu; - unsigned long flags, order, npages, entry, devhandle; + unsigned long flags, order, npages, entry; + u32 devhandle; npages = IO_PAGE_ALIGN(size) >> IO_PAGE_SHIFT; pcp = pdev->sysdata; @@ -182,8 +184,8 @@ static dma_addr_t pci_4v_map_single(struct pci_dev *pdev, void *ptr, size_t sz, struct pcidev_cookie *pcp; struct pci_iommu *iommu; unsigned long flags, npages, oaddr; - unsigned long i, base_paddr, devhandle; - u32 bus_addr, ret; + unsigned long i, base_paddr; + u32 devhandle, bus_addr, ret; unsigned long prot; long entry; u64 *pglist; @@ -219,7 +221,7 @@ static dma_addr_t pci_4v_map_single(struct pci_dev *pdev, void *ptr, size_t sz, cpu = get_cpu(); - pglist = &__get_cpu_var(iommu_pglists).pglist[0]; + pglist = __get_cpu_var(iommu_pglists).pglist; for (i = 0; i < npages; i++, base_paddr += IO_PAGE_SIZE) pglist[i] = base_paddr; @@ -248,8 +250,9 @@ static void pci_4v_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_ { struct pcidev_cookie *pcp; struct pci_iommu *iommu; - unsigned long flags, npages, devhandle; + unsigned long flags, npages; long entry; + u32 devhandle; if (unlikely(direction == PCI_DMA_NONE)) { if (printk_ratelimit()) @@ -285,7 +288,7 @@ static void pci_4v_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_ #define SG_ENT_PHYS_ADDRESS(SG) \ (__pa(page_address((SG)->page)) + (SG)->offset) -static inline void fill_sg(long entry, unsigned long devhandle, +static inline void fill_sg(long entry, u32 devhandle, struct scatterlist *sg, int nused, int nelems, unsigned long prot) { @@ -295,7 +298,7 @@ static inline void fill_sg(long entry, unsigned long devhandle, u64 *pglist; cpu = get_cpu(); - pglist = &__get_cpu_var(iommu_pglists).pglist[0]; + pglist = __get_cpu_var(iommu_pglists).pglist; pglist_ent = 0; for (i = 0; i < nused; i++) { unsigned long pteval = ~0UL; @@ -380,8 +383,8 @@ static int pci_4v_map_sg(struct pci_dev *pdev, struct scatterlist *sglist, int n { struct pcidev_cookie *pcp; struct pci_iommu *iommu; - unsigned long flags, npages, prot, devhandle; - u32 dma_base; + unsigned long flags, npages, prot; + u32 devhandle, dma_base; struct scatterlist *sgtmp; long entry; int used; @@ -451,9 +454,9 @@ static void pci_4v_unmap_sg(struct pci_dev *pdev, struct scatterlist *sglist, in { struct pcidev_cookie *pcp; struct pci_iommu *iommu; - unsigned long flags, i, npages, devhandle; + unsigned long flags, i, npages; long entry; - u32 bus_addr; + u32 devhandle, bus_addr; if (unlikely(direction == PCI_DMA_NONE)) { if (printk_ratelimit()) @@ -805,7 +808,8 @@ static void probe_existing_entries(struct pci_pbm_info *pbm, struct pci_iommu *iommu) { struct pci_iommu_arena *arena = &iommu->arena; - unsigned long i, devhandle; + unsigned long i; + u32 devhandle; devhandle = pbm->devhandle; for (i = 0; i < arena->limit; i++) { @@ -906,7 +910,7 @@ static void pci_sun4v_get_bus_range(struct pci_pbm_info *pbm) } -static void pci_sun4v_pbm_init(struct pci_controller_info *p, int prom_node, unsigned int devhandle) +static void pci_sun4v_pbm_init(struct pci_controller_info *p, int prom_node, u32 devhandle) { struct pci_pbm_info *pbm; int err, i; @@ -978,7 +982,8 @@ void sun4v_pci_init(int node, char *model_name) struct pci_controller_info *p; struct pci_iommu *iommu; struct linux_prom64_registers regs; - unsigned int devhandle; + u32 devhandle; + int i; prom_getproperty(node, "reg", (char *)®s, sizeof(regs)); devhandle = (regs.phys_addr >> 32UL) & 0x0fffffff; @@ -999,26 +1004,32 @@ void sun4v_pci_init(int node, char *model_name) } } - p = kmalloc(sizeof(struct pci_controller_info), GFP_ATOMIC); - if (!p) { - prom_printf("SUN4V_PCI: Fatal memory allocation error.\n"); - prom_halt(); + for (i = 0; i < NR_CPUS; i++) { + unsigned long page = get_zeroed_page(GFP_ATOMIC); + + if (!page) + goto fatal_memory_error; + + per_cpu(iommu_pglists, i).pglist = (u64 *) page; } + + p = kmalloc(sizeof(struct pci_controller_info), GFP_ATOMIC); + if (!p) + goto fatal_memory_error; + memset(p, 0, sizeof(*p)); iommu = kmalloc(sizeof(struct pci_iommu), GFP_ATOMIC); - if (!iommu) { - prom_printf("SCHIZO: Fatal memory allocation error.\n"); - prom_halt(); - } + if (!iommu) + goto fatal_memory_error; + memset(iommu, 0, sizeof(*iommu)); p->pbm_A.iommu = iommu; iommu = kmalloc(sizeof(struct pci_iommu), GFP_ATOMIC); - if (!iommu) { - prom_printf("SCHIZO: Fatal memory allocation error.\n"); - prom_halt(); - } + if (!iommu) + goto fatal_memory_error; + memset(iommu, 0, sizeof(*iommu)); p->pbm_B.iommu = iommu; @@ -1040,4 +1051,9 @@ void sun4v_pci_init(int node, char *model_name) pci_memspace_mask = 0x7fffffffUL; pci_sun4v_pbm_init(p, node, devhandle); + return; + +fatal_memory_error: + prom_printf("SUN4V_PCI: Fatal memory allocation error.\n"); + prom_halt(); } -- cgit v1.2.3-18-g5258 From a615fea48be4eada94986d63e3e8ee5563121649 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 13 Feb 2006 22:37:07 -0800 Subject: [SPARC64]: Use TRAP_LOAD_IRQ_WORK() in sun4v device mondo handler. Signed-off-by: David S. Miller --- arch/sparc64/kernel/sun4v_ivec.S | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/sun4v_ivec.S b/arch/sparc64/kernel/sun4v_ivec.S index c0367ef7e09..b49a68bdda4 100644 --- a/arch/sparc64/kernel/sun4v_ivec.S +++ b/arch/sparc64/kernel/sun4v_ivec.S @@ -98,10 +98,7 @@ sun4v_dev_mondo: membar #Sync /* Get &__irq_work[smp_processor_id()] into %g1. */ - sethi %hi(__irq_work), %g4 - sllx %g1, 6, %g1 - or %g4, %lo(__irq_work), %g4 - add %g4, %g1, %g1 + TRAP_LOAD_IRQ_WORK(%g1, %g4) /* Get &ivector_table[IVEC] into %g4. */ sethi %hi(ivector_table), %g4 -- cgit v1.2.3-18-g5258 From 4bf447d6f7c2357dec8bdc24ce0fcffd71cc29c0 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 13 Feb 2006 22:37:32 -0800 Subject: [SPARC64]: Pass correct ino to sun4v_intr_*(). Signed-off-by: David S. Miller --- arch/sparc64/kernel/irq.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index a55177e0643..c57b1708ae8 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -152,10 +152,11 @@ void enable_irq(unsigned int irq) preempt_disable(); if (tlb_type == hypervisor) { + unsigned int ino = __irq_ino(irq); int cpu = hard_smp_processor_id(); - sun4v_intr_settarget(irq, cpu); - sun4v_intr_setenabled(irq, HV_INTR_ENABLED); + sun4v_intr_settarget(ino, cpu); + sun4v_intr_setenabled(ino, HV_INTR_ENABLED); } else { if (tlb_type == cheetah || tlb_type == cheetah_plus) { unsigned long ver; @@ -214,7 +215,9 @@ void disable_irq(unsigned int irq) imap = bucket->imap; if (imap != 0UL) { if (tlb_type == hypervisor) { - sun4v_intr_setenabled(irq, HV_INTR_DISABLED); + unsigned int ino = __irq_ino(irq); + + sun4v_intr_setenabled(ino, HV_INTR_DISABLED); } else { u32 tmp; @@ -643,9 +646,9 @@ static void process_bucket(int irq, struct ino_bucket *bp, struct pt_regs *regs) } if (bp->pil != 0) { if (tlb_type == hypervisor) { - unsigned int irq = __irq(bp); + unsigned int ino = __irq_ino(bp); - sun4v_intr_setstate(irq, HV_INTR_STATE_IDLE); + sun4v_intr_setstate(ino, HV_INTR_STATE_IDLE); } else { upa_writel(ICLR_IDLE, bp->iclr); /* Test and add entropy */ @@ -791,10 +794,10 @@ static int retarget_one_irq(struct irqaction *p, int goal_cpu) } if (tlb_type == hypervisor) { - unsigned int irq = __irq(bucket); + unsigned int ino = __irq_ino(bucket); - sun4v_intr_settarget(irq, goal_cpu); - sun4v_intr_setenabled(irq, HV_INTR_ENABLED); + sun4v_intr_settarget(ino, goal_cpu); + sun4v_intr_setenabled(ino, HV_INTR_ENABLED); } else { unsigned int tid; -- cgit v1.2.3-18-g5258 From c4bea2883974a59ab7a0ac6c01d34f7ae0e8cd8e Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 13 Feb 2006 22:56:27 -0800 Subject: [SPARC64]: Make error codes available from sun4v_intr_get*(). And check for errors at call sites. Signed-off-by: David S. Miller --- arch/sparc64/kernel/irq.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index c57b1708ae8..0d3b0ea329c 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -154,9 +154,16 @@ void enable_irq(unsigned int irq) if (tlb_type == hypervisor) { unsigned int ino = __irq_ino(irq); int cpu = hard_smp_processor_id(); + int err; - sun4v_intr_settarget(ino, cpu); + err = sun4v_intr_settarget(ino, cpu); + if (err != HV_EOK) + printk("sun4v_intr_settarget(%x,%d): err(%d)\n", + ino, cpu, err); sun4v_intr_setenabled(ino, HV_INTR_ENABLED); + if (err != HV_EOK) + printk("sun4v_intr_setenabled(%x): err(%d)\n", + ino, err); } else { if (tlb_type == cheetah || tlb_type == cheetah_plus) { unsigned long ver; @@ -216,8 +223,12 @@ void disable_irq(unsigned int irq) if (imap != 0UL) { if (tlb_type == hypervisor) { unsigned int ino = __irq_ino(irq); + int err; - sun4v_intr_setenabled(ino, HV_INTR_DISABLED); + err = sun4v_intr_setenabled(ino, HV_INTR_DISABLED); + if (err != HV_EOK) + printk("sun4v_intr_setenabled(%x): " + "err(%d)\n", ino, err); } else { u32 tmp; @@ -647,8 +658,12 @@ static void process_bucket(int irq, struct ino_bucket *bp, struct pt_regs *regs) if (bp->pil != 0) { if (tlb_type == hypervisor) { unsigned int ino = __irq_ino(bp); + int err; - sun4v_intr_setstate(ino, HV_INTR_STATE_IDLE); + err = sun4v_intr_setstate(ino, HV_INTR_STATE_IDLE); + if (err != HV_EOK) + printk("sun4v_intr_setstate(%x): " + "err(%d)\n", ino, err); } else { upa_writel(ICLR_IDLE, bp->iclr); /* Test and add entropy */ -- cgit v1.2.3-18-g5258 From 3af6e01e9acfb786c5dd2862f57f206b0b3cb889 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 14 Feb 2006 00:55:49 -0800 Subject: [SPARC64]: arch/sparc64/kernel/trampoline.S needs asm/cpudata.h Signed-off-by: David S. Miller --- arch/sparc64/kernel/trampoline.S | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/sparc64/kernel/trampoline.S b/arch/sparc64/kernel/trampoline.S index 22fb24eac99..b9c9f54b0a0 100644 --- a/arch/sparc64/kernel/trampoline.S +++ b/arch/sparc64/kernel/trampoline.S @@ -17,6 +17,7 @@ #include #include #include +#include .data .align 8 -- cgit v1.2.3-18-g5258 From 4a07e646c55be118442e464b7a2a9682c7131d9a Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 14 Feb 2006 13:49:32 -0800 Subject: [SPARC64]: Kill sun4v_register_fault_status() on SMP. That now gets done as a side effect of taking over the trap table from OBP. Signed-off-by: David S. Miller --- arch/sparc64/kernel/smp.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 2dbe008d6b7..c280e6742b2 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -122,10 +122,8 @@ void __init smp_callin(void) __local_per_cpu_offset = __per_cpu_offset(cpuid); - if (tlb_type == hypervisor) { - sun4v_register_fault_status(); + if (tlb_type == hypervisor) sun4v_ktsb_register(); - } __flush_tlb_all(); -- cgit v1.2.3-18-g5258 From e7093703d912254b5667dfe851a6d0f7e664f9df Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 14 Feb 2006 14:12:44 -0800 Subject: [SPARC64]: INO is never fully specified already on SUN4V. Signed-off-by: David S. Miller --- arch/sparc64/kernel/pci_common.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/pci_common.c b/arch/sparc64/kernel/pci_common.c index 58310aacea2..1b1f89b35f6 100644 --- a/arch/sparc64/kernel/pci_common.c +++ b/arch/sparc64/kernel/pci_common.c @@ -703,16 +703,18 @@ static void __init pdev_fixup_irq(struct pci_dev *pdev) return; } - /* Fully specified already? */ - if (((prom_irq & PCI_IRQ_IGN) >> 6) == portid) { - pdev->irq = p->irq_build(pbm, pdev, prom_irq); - goto have_irq; - } + if (tlb_type != hypervisor) { + /* Fully specified already? */ + if (((prom_irq & PCI_IRQ_IGN) >> 6) == portid) { + pdev->irq = p->irq_build(pbm, pdev, prom_irq); + goto have_irq; + } - /* An onboard device? (bit 5 set) */ - if ((prom_irq & PCI_IRQ_INO) & 0x20) { - pdev->irq = p->irq_build(pbm, pdev, (portid << 6 | prom_irq)); - goto have_irq; + /* An onboard device? (bit 5 set) */ + if ((prom_irq & PCI_IRQ_INO) & 0x20) { + pdev->irq = p->irq_build(pbm, pdev, (portid << 6 | prom_irq)); + goto have_irq; + } } /* Can we find a matching entry in the interrupt-map? */ -- cgit v1.2.3-18-g5258 From fbf1c68eaf8a945c8617e355d8d6bd2fa09109d2 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 14 Feb 2006 16:37:13 -0800 Subject: [SPARC64]: Don't printk() any messaages in sun4v_build_irq(). It just clutters up the log. Signed-off-by: David S. Miller --- arch/sparc64/kernel/irq.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index 0d3b0ea329c..72e626b54ba 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -333,9 +333,6 @@ unsigned int sun4v_build_irq(u32 devhandle, unsigned int devino, int pil, unsign sysino = sun4v_devino_to_sysino(devhandle, devino); - printk(KERN_INFO "sun4v_irq: Mapping (%x:%x) --> sysino[%lx]\n", - devhandle, devino, sysino); - bucket = &ivector_table[sysino]; /* Catch accidental accesses to these things. IMAP/ICLR handling -- cgit v1.2.3-18-g5258 From 9f8a5b843fc47ea150525f912574677483e1a5ac Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 14 Feb 2006 16:39:22 -0800 Subject: [SPARC64]: Fix C-function name called by sun4v_mna trap code. The trap code was calling itself :-) Signed-off-by: David S. Miller --- arch/sparc64/kernel/sun4v_tlb_miss.S | 2 +- arch/sparc64/kernel/traps.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/sun4v_tlb_miss.S b/arch/sparc64/kernel/sun4v_tlb_miss.S index 950ca74b4a5..b3844ee3844 100644 --- a/arch/sparc64/kernel/sun4v_tlb_miss.S +++ b/arch/sparc64/kernel/sun4v_tlb_miss.S @@ -265,7 +265,7 @@ sun4v_mna: rd %pc, %g7 mov %l4, %o1 mov %l5, %o2 - call sun4v_mna + call sun4v_do_mna add %sp, PTREGS_OFF, %o0 ba,a,pt %xcc, rtrap_clr_l6 diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c index 1e9a4b6b1fe..bedb2f693c7 100644 --- a/arch/sparc64/kernel/traps.c +++ b/arch/sparc64/kernel/traps.c @@ -2250,7 +2250,7 @@ void mem_address_unaligned(struct pt_regs *regs, unsigned long sfar, unsigned lo force_sig_info(SIGBUS, &info, current); } -void sun4v_mna(struct pt_regs *regs, unsigned long addr, unsigned long type_ctx) +void sun4v_do_mna(struct pt_regs *regs, unsigned long addr, unsigned long type_ctx) { siginfo_t info; -- cgit v1.2.3-18-g5258 From 987b6de7102cf2f583733efd726ae920a1335519 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 14 Feb 2006 16:42:11 -0800 Subject: [SPARC64]: Restrict PCI bus scanning on SUN4V. On the PBM's first bus number, only allow device 0, function 0, to be poked at with PCI config space accesses. For some reason, this single device responds to all device numbers. Also, reduce the verbiage of the debugging log printk's for PCI cfg space accesses in the SUN4V PCI controller driver, so that it doesn't overwhelm the slow SUN4V hypervisor console. Signed-off-by: David S. Miller --- arch/sparc64/kernel/pci_sun4v.c | 36 ++++++++++++++++-------------------- 1 file changed, 16 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c index ac311d3dbc5..ea51ade43b8 100644 --- a/arch/sparc64/kernel/pci_sun4v.c +++ b/arch/sparc64/kernel/pci_sun4v.c @@ -517,8 +517,14 @@ struct pci_iommu_ops pci_sun4v_iommu_ops = { /* SUN4V PCI configuration space accessors. */ -static inline int pci_sun4v_out_of_range(struct pci_pbm_info *pbm, unsigned int bus) +static inline int pci_sun4v_out_of_range(struct pci_pbm_info *pbm, unsigned int bus, unsigned int device, unsigned int func) { + if (bus == pbm->pci_first_busno) { + if (device == 0 && func == 0) + return 0; + return 1; + } + if (bus < pbm->pci_first_busno || bus > pbm->pci_last_busno) return 1; @@ -535,15 +541,14 @@ static int pci_sun4v_read_pci_cfg(struct pci_bus *bus_dev, unsigned int devfn, unsigned int func = PCI_FUNC(devfn); unsigned long ret; - if (pci_sun4v_out_of_range(pbm, bus)) { + if (pci_sun4v_out_of_range(pbm, bus, device, func)) { ret = ~0UL; } else { ret = pci_sun4v_config_get(devhandle, HV_PCI_DEVICE_BUILD(bus, device, func), where, size); #if 0 - printk("read_pci_cfg: devh[%x] device[%08x] where[%x] sz[%d] " - "== [%016lx]\n", + printk("rcfg: [%x:%x:%x:%d]=[%lx]\n", devhandle, HV_PCI_DEVICE_BUILD(bus, device, func), where, size, ret); #endif @@ -574,15 +579,14 @@ static int pci_sun4v_write_pci_cfg(struct pci_bus *bus_dev, unsigned int devfn, unsigned int func = PCI_FUNC(devfn); unsigned long ret; - if (pci_sun4v_out_of_range(pbm, bus)) { + if (pci_sun4v_out_of_range(pbm, bus, device, func)) { /* Do nothing. */ } else { ret = pci_sun4v_config_put(devhandle, HV_PCI_DEVICE_BUILD(bus, device, func), where, size, value); #if 0 - printk("write_pci_cfg: devh[%x] device[%08x] where[%x] sz[%d] " - "val[%08x] == [%016lx]\n", + printk("wcfg: [%x:%x:%x:%d] v[%x] == [%lx]\n", devhandle, HV_PCI_DEVICE_BUILD(bus, device, func), where, size, value, ret); #endif @@ -610,16 +614,13 @@ static void pbm_scan_bus(struct pci_controller_info *p, memset(cookie, 0, sizeof(*cookie)); cookie->pbm = pbm; - pbm->pci_bus = pci_scan_bus(pbm->pci_first_busno, - p->pci_ops, - pbm); + pbm->pci_bus = pci_scan_bus(pbm->pci_first_busno, p->pci_ops, pbm); #if 0 pci_fixup_host_bridge_self(pbm->pci_bus); pbm->pci_bus->self->sysdata = cookie; #endif - pci_fill_in_pbm_cookies(pbm->pci_bus, pbm, - prom_getchild(pbm->prom_node)); + pbm->prom_node); pci_record_assignments(pbm, pbm->pci_bus); pci_assign_unassigned(pbm, pbm->pci_bus); pci_fixup_irq(pbm, pbm->pci_bus); @@ -884,19 +885,12 @@ static void pci_sun4v_iommu_init(struct pci_pbm_info *pbm) probe_existing_entries(pbm, iommu); } -/* Don't get this from the root nexus, get it from the "pci@0" node below. */ static void pci_sun4v_get_bus_range(struct pci_pbm_info *pbm) { unsigned int busrange[2]; int prom_node = pbm->prom_node; int err; - prom_node = prom_getchild(prom_node); - if (prom_node == 0) { - prom_printf("%s: Fatal error, no child OBP node.\n", pbm->name); - prom_halt(); - } - err = prom_getproperty(prom_node, "bus-range", (char *)&busrange[0], sizeof(busrange)); @@ -929,7 +923,9 @@ static void pci_sun4v_pbm_init(struct pci_controller_info *p, int prom_node, u32 sprintf(pbm->name, "SUN4V-PCI%d PBM%c", p->index, (pbm == &p->pbm_A ? 'A' : 'B')); - printk("%s: devhandle[%x]\n", pbm->name, pbm->devhandle); + printk("%s: devhandle[%x] prom_node[%x:%x]\n", + pbm->name, pbm->devhandle, + pbm->prom_node, prom_getchild(pbm->prom_node)); prom_getstring(prom_node, "name", pbm->prom_name, sizeof(pbm->prom_name)); -- cgit v1.2.3-18-g5258 From 355db99860a1d77d77cd2fc66e2f5ab58f3e0995 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 14 Feb 2006 16:44:39 -0800 Subject: [SPARC64]: Explicitly init *nregs to 0 in find_device_prom_node(). Signed-off-by: David S. Miller --- arch/sparc64/kernel/pci_common.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/pci_common.c b/arch/sparc64/kernel/pci_common.c index 1b1f89b35f6..b2d21b11a23 100644 --- a/arch/sparc64/kernel/pci_common.c +++ b/arch/sparc64/kernel/pci_common.c @@ -39,6 +39,8 @@ static int __init find_device_prom_node(struct pci_pbm_info *pbm, { int node; + *nregs = 0; + /* * Return the PBM's PROM node in case we are it's PCI device, * as the PBM's reg property is different to standard PCI reg @@ -51,10 +53,8 @@ static int __init find_device_prom_node(struct pci_pbm_info *pbm, pdev->device == PCI_DEVICE_ID_SUN_SCHIZO || pdev->device == PCI_DEVICE_ID_SUN_TOMATILLO || pdev->device == PCI_DEVICE_ID_SUN_SABRE || - pdev->device == PCI_DEVICE_ID_SUN_HUMMINGBIRD)) { - *nregs = 0; + pdev->device == PCI_DEVICE_ID_SUN_HUMMINGBIRD)) return bus_prom_node; - } node = prom_getchild(bus_prom_node); while (node != 0) { -- cgit v1.2.3-18-g5258 From abd92b2d21899d42a60c3c1ac995768c76774608 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 14 Feb 2006 22:20:13 -0800 Subject: [SPARC64]: Fix sun4v_intr_setenabled() return value check in enable_irq(). Signed-off-by: David S. Miller --- arch/sparc64/kernel/irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index 72e626b54ba..c786d2549bc 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -160,7 +160,7 @@ void enable_irq(unsigned int irq) if (err != HV_EOK) printk("sun4v_intr_settarget(%x,%d): err(%d)\n", ino, cpu, err); - sun4v_intr_setenabled(ino, HV_INTR_ENABLED); + err = sun4v_intr_setenabled(ino, HV_INTR_ENABLED); if (err != HV_EOK) printk("sun4v_intr_setenabled(%x): err(%d)\n", ino, err); -- cgit v1.2.3-18-g5258 From 329c68b21896eea371edbfdf305c459fb74cf9a8 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 14 Feb 2006 22:20:41 -0800 Subject: [SPARC64]: Make lack of interrupt-map-* a fatal error on SUN4V. Signed-off-by: David S. Miller --- arch/sparc64/kernel/pci_sun4v.c | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c index ea51ade43b8..13b611db058 100644 --- a/arch/sparc64/kernel/pci_sun4v.c +++ b/arch/sparc64/kernel/pci_sun4v.c @@ -954,19 +954,20 @@ static void pci_sun4v_pbm_init(struct pci_controller_info *p, int prom_node, u32 err = prom_getproperty(prom_node, "interrupt-map", (char *)pbm->pbm_intmap, sizeof(pbm->pbm_intmap)); - if (err != -1) { - pbm->num_pbm_intmap = (err / sizeof(struct linux_prom_pci_intmap)); - err = prom_getproperty(prom_node, "interrupt-map-mask", - (char *)&pbm->pbm_intmask, - sizeof(pbm->pbm_intmask)); - if (err == -1) { - prom_printf("%s: Fatal error, no " - "interrupt-map-mask.\n", pbm->name); - prom_halt(); - } - } else { - pbm->num_pbm_intmap = 0; - memset(&pbm->pbm_intmask, 0, sizeof(pbm->pbm_intmask)); + if (err == 0 || err == -1) { + prom_printf("%s: Fatal error, no interrupt-map property.\n", + pbm->name); + prom_halt(); + } + + pbm->num_pbm_intmap = (err / sizeof(struct linux_prom_pci_intmap)); + err = prom_getproperty(prom_node, "interrupt-map-mask", + (char *)&pbm->pbm_intmask, + sizeof(pbm->pbm_intmask)); + if (err == 0 || err == -1) { + prom_printf("%s: Fatal error, no interrupt-map-mask.\n", + pbm->name); + prom_halt(); } pci_sun4v_get_bus_range(pbm); -- cgit v1.2.3-18-g5258 From f03b8a546868fcf43feb455b69b152eb867606b2 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 15 Feb 2006 00:35:50 -0800 Subject: [SPARC64]: Use different cache sizing defaults on SUN4V. Signed-off-by: David S. Miller --- arch/sparc64/kernel/devices.c | 34 +++++++++++++++++++++++++++------- arch/sparc64/kernel/smp.c | 28 +++++++++++++++++++++------- 2 files changed, 48 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/devices.c b/arch/sparc64/kernel/devices.c index 817132826e0..71eee392e14 100644 --- a/arch/sparc64/kernel/devices.c +++ b/arch/sparc64/kernel/devices.c @@ -200,7 +200,8 @@ void __init device_scan(void) #ifndef CONFIG_SMP { - int err, cpu_node; + int err, cpu_node, def; + err = cpu_find_by_instance(0, &cpu_node, NULL); if (err) { prom_printf("No cpu nodes, cannot continue\n"); @@ -209,21 +210,40 @@ void __init device_scan(void) cpu_data(0).clock_tick = prom_getintdefault(cpu_node, "clock-frequency", 0); + + def = ((tlb_type == hypervisor) ? + (8 * 1024) : + (16 * 1024)); cpu_data(0).dcache_size = prom_getintdefault(cpu_node, "dcache-size", - 16 * 1024); + def); + + def = 32; cpu_data(0).dcache_line_size = - prom_getintdefault(cpu_node, "dcache-line-size", 32); + prom_getintdefault(cpu_node, "dcache-line-size", + def); + + def = 16 * 1024; cpu_data(0).icache_size = prom_getintdefault(cpu_node, "icache-size", - 16 * 1024); + def); + + def = 32; cpu_data(0).icache_line_size = - prom_getintdefault(cpu_node, "icache-line-size", 32); + prom_getintdefault(cpu_node, "icache-line-size", + def); + + def = ((tlb_type == hypervisor) ? + (3 * 1024 * 1024) : + (4 * 1024 * 1024)); cpu_data(0).ecache_size = prom_getintdefault(cpu_node, "ecache-size", - 4 * 1024 * 1024); + def); + + def = 64; cpu_data(0).ecache_line_size = - prom_getintdefault(cpu_node, "ecache-line-size", 64); + prom_getintdefault(cpu_node, "ecache-line-size", + def); printk("CPU[0]: Caches " "D[sz(%d):line_sz(%d)] " "I[sz(%d):line_sz(%d)] " diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index c280e6742b2..64046d37bbf 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -78,7 +78,7 @@ void smp_bogo(struct seq_file *m) void __init smp_store_cpu_info(int id) { - int cpu_node; + int cpu_node, def; /* multiplier and counter set by smp_setup_percpu_timer() */ @@ -90,18 +90,32 @@ void __init smp_store_cpu_info(int id) cpu_data(id).idle_volume = 1; + def = ((tlb_type == hypervisor) ? (8 * 1024) : (16 * 1024)); cpu_data(id).dcache_size = prom_getintdefault(cpu_node, "dcache-size", - 16 * 1024); + def); + + def = 32; cpu_data(id).dcache_line_size = - prom_getintdefault(cpu_node, "dcache-line-size", 32); + prom_getintdefault(cpu_node, "dcache-line-size", def); + + def = 16 * 1024; cpu_data(id).icache_size = prom_getintdefault(cpu_node, "icache-size", - 16 * 1024); + def); + + def = 32; cpu_data(id).icache_line_size = - prom_getintdefault(cpu_node, "icache-line-size", 32); + prom_getintdefault(cpu_node, "icache-line-size", def); + + def = ((tlb_type == hypervisor) ? + (3 * 1024 * 1024) : + (4 * 1024 * 1024)); cpu_data(id).ecache_size = prom_getintdefault(cpu_node, "ecache-size", - 4 * 1024 * 1024); + def); + + def = 64; cpu_data(id).ecache_line_size = - prom_getintdefault(cpu_node, "ecache-line-size", 64); + prom_getintdefault(cpu_node, "ecache-line-size", def); + printk("CPU[%d]: Caches " "D[sz(%d):line_sz(%d)] " "I[sz(%d):line_sz(%d)] " -- cgit v1.2.3-18-g5258 From ab66a50e31deb48b0444c248e67e5aa3217efda5 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 15 Feb 2006 01:18:19 -0800 Subject: [SPARC64]: Two IRQ handling fixes. On SUN4V, force IRQ state to idle in enable_irq(). However, I'm still not sure this is %100 correct. Call add_interrupt_randomness() on SUN4V too. Signed-off-by: David S. Miller --- arch/sparc64/kernel/irq.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index c786d2549bc..4d9931d124a 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -164,6 +164,10 @@ void enable_irq(unsigned int irq) if (err != HV_EOK) printk("sun4v_intr_setenabled(%x): err(%d)\n", ino, err); + err = sun4v_intr_setstate(ino, HV_INTR_STATE_IDLE); + if (err != HV_EOK) + printk("sun4v_intr_setstate(%x): " + "err(%d)\n", ino, err); } else { if (tlb_type == cheetah || tlb_type == cheetah_plus) { unsigned long ver; @@ -663,10 +667,11 @@ static void process_bucket(int irq, struct ino_bucket *bp, struct pt_regs *regs) "err(%d)\n", ino, err); } else { upa_writel(ICLR_IDLE, bp->iclr); - /* Test and add entropy */ - if (random & SA_SAMPLE_RANDOM) - add_interrupt_randomness(irq); } + + /* Test and add entropy */ + if (random & SA_SAMPLE_RANDOM) + add_interrupt_randomness(irq); } out: bp->flags &= ~IBF_INPROGRESS; -- cgit v1.2.3-18-g5258 From 63c2a0e598c2fa769a08a6e9ad124bf270b4436e Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 15 Feb 2006 01:19:56 -0800 Subject: [SPARC64]: Fix pci_intmap_match(). When crawling up the PCI bus chain, stop at the first node that has an interrupt-map property before we hit the root. Also, if we use a bus interrupt-{map,mask} do not forget to update the 'intmask' pointer as we do for the 'intmap' pointer. Signed-off-by: David S. Miller --- arch/sparc64/kernel/pci_common.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/pci_common.c b/arch/sparc64/kernel/pci_common.c index b2d21b11a23..ab6a2e1b76f 100644 --- a/arch/sparc64/kernel/pci_common.c +++ b/arch/sparc64/kernel/pci_common.c @@ -581,18 +581,23 @@ static int __init pci_intmap_match(struct pci_dev *pdev, unsigned int *interrupt int plen; bus_dev = pdev->bus->self; + bus_pcp = bus_dev->sysdata; regs_dev = pdev; + regs_pcp = regs_dev->sysdata; while (bus_dev->bus && - bus_dev->bus->number != pbm->pci_first_busno) { + bus_dev->bus->number != pbm->pci_first_busno && + prom_getproplen(bus_pcp->prom_node, + "interrupt-map") <= 0) { regs_dev = bus_dev; + regs_pcp = regs_dev->sysdata; + bus_dev = bus_dev->bus->self; + bus_pcp = bus_dev->sysdata; } - regs_pcp = regs_dev->sysdata; pregs = regs_pcp->prom_regs; - bus_pcp = bus_dev->sysdata; /* But if the PCI bridge has it's own interrupt map * and mask properties, use that and the regs of the @@ -616,6 +621,8 @@ static int __init pci_intmap_match(struct pci_dev *pdev, unsigned int *interrupt return 0; } + intmask = &bridge_local_intmask; + if (pdev->bus->self != bus_dev) map_slot = 1; } else { -- cgit v1.2.3-18-g5258 From 7890f794e0e6f7dce2a5f4a03ba64b0b3fe306bd Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 15 Feb 2006 02:26:54 -0800 Subject: [SPARC64]: Add prom_{start,stop}cpu_cpuid(). Use prom_startcpu_cpuid() on SUN4V instead of prom_startcpu(). We should really test for "SUNW,start-cpu-by-cpuid" presence and use it if present even on SUN4U. Signed-off-by: David S. Miller --- arch/sparc64/kernel/smp.c | 12 +++++++++--- arch/sparc64/prom/misc.c | 16 ++++++++++++++-- 2 files changed, 23 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 64046d37bbf..527dfd7ae21 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -331,15 +331,21 @@ static int __devinit smp_boot_one_cpu(unsigned int cpu) unsigned long cookie = (unsigned long)(&cpu_new_thread); struct task_struct *p; - int timeout, ret, cpu_node; + int timeout, ret; p = fork_idle(cpu); callin_flag = 0; cpu_new_thread = task_thread_info(p); cpu_set(cpu, cpu_callout_map); - cpu_find_by_mid(cpu, &cpu_node); - prom_startcpu(cpu_node, entry, cookie); + if (tlb_type == hypervisor) { + prom_startcpu_cpuid(cpu, entry, cookie); + } else { + int cpu_node; + + cpu_find_by_mid(cpu, &cpu_node); + prom_startcpu(cpu_node, entry, cookie); + } for (timeout = 0; timeout < 5000000; timeout++) { if (callin_flag) diff --git a/arch/sparc64/prom/misc.c b/arch/sparc64/prom/misc.c index 713cbac5f9b..36d2b9c1622 100644 --- a/arch/sparc64/prom/misc.c +++ b/arch/sparc64/prom/misc.c @@ -308,9 +308,21 @@ int prom_wakeupsystem(void) } #ifdef CONFIG_SMP -void prom_startcpu(int cpunode, unsigned long pc, unsigned long o0) +void prom_startcpu(int cpunode, unsigned long pc, unsigned long arg) { - p1275_cmd("SUNW,start-cpu", P1275_INOUT(3, 0), cpunode, pc, o0); + p1275_cmd("SUNW,start-cpu", P1275_INOUT(3, 0), cpunode, pc, arg); +} + +void prom_startcpu_cpuid(int cpuid, unsigned long pc, unsigned long arg) +{ + p1275_cmd("SUNW,start-cpu-by-cpuid", P1275_INOUT(3, 0), + cpuid, pc, arg); +} + +void prom_stopcpu_cpuid(int cpuid) +{ + p1275_cmd("SUNW,stop-cpu-by-cpuid", P1275_INOUT(1, 0), + cpuid); } void prom_stopself(void) -- cgit v1.2.3-18-g5258 From 9d29a3fafd06534ad73427fee3c968c094d05b9b Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 15 Feb 2006 19:48:54 -0800 Subject: [SPARC64]: Decode virtual-devices interrupts correctly. Need to translate through the interrupt-map{,-mask] properties. Signed-off-by: David S. Miller --- arch/sparc64/kernel/devices.c | 98 +++++++++++++++++++++++++++++++++++++------ 1 file changed, 86 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/devices.c b/arch/sparc64/kernel/devices.c index 71eee392e14..1341b99ca7a 100644 --- a/arch/sparc64/kernel/devices.c +++ b/arch/sparc64/kernel/devices.c @@ -22,6 +22,7 @@ #include #include #include +#include /* Used to synchronize acceses to NatSemi SUPER I/O chip configure * operations in asm/ns87303.h @@ -33,14 +34,28 @@ extern void central_probe(void); u32 sun4v_vdev_devhandle; int sun4v_vdev_root; -struct linux_prom_pci_intmap *sun4v_vdev_intmap; -int sun4v_vdev_num_intmap; -struct linux_prom_pci_intmap sun4v_vdev_intmask; + +struct vdev_intmap { + unsigned int phys; + unsigned int irq; + unsigned int cnode; + unsigned int cinterrupt; +}; + +struct vdev_intmask { + unsigned int phys; + unsigned int interrupt; + unsigned int __unused; +}; + +static struct vdev_intmap *vdev_intmap; +static int vdev_num_intmap; +static struct vdev_intmask vdev_intmask; static void __init sun4v_virtual_device_probe(void) { struct linux_prom64_registers regs; - struct linux_prom_pci_intmap *ip; + struct vdev_intmap *ip; int node, sz, err; if (tlb_type != hypervisor) @@ -58,10 +73,21 @@ static void __init sun4v_virtual_device_probe(void) prom_getproperty(node, "reg", (char *)®s, sizeof(regs)); sun4v_vdev_devhandle = (regs.phys_addr >> 32UL) & 0x0fffffff; - sz = sizeof(*ip) * 64; - sun4v_vdev_intmap = ip = alloc_bootmem_low_pages(sz); - if (!sun4v_vdev_intmap) { - prom_printf("SUN4V: Error, cannot allocate vdev intmap.\n"); + sz = prom_getproplen(node, "interrupt-map"); + if (sz <= 0) { + prom_printf("SUN4V: Error, no vdev interrupt-map.\n"); + prom_halt(); + } + + if ((sz % sizeof(*ip)) != 0) { + prom_printf("SUN4V: Bogus interrupt-map property size %d\n", + sz); + prom_halt(); + } + + vdev_intmap = ip = alloc_bootmem_low_pages(sz); + if (!vdev_intmap) { + prom_printf("SUN4V: Error, cannot allocate vdev_intmap.\n"); prom_halt(); } @@ -70,22 +96,70 @@ static void __init sun4v_virtual_device_probe(void) prom_printf("SUN4V: Fatal error, no vdev interrupt-map.\n"); prom_halt(); } + if (err != sz) { + prom_printf("SUN4V: Inconsistent interrupt-map size, " + "proplen(%d) vs getprop(%d).\n", sz,err); + prom_halt(); + } - sun4v_vdev_num_intmap = err / sizeof(*ip); + vdev_num_intmap = err / sizeof(*ip); err = prom_getproperty(node, "interrupt-map-mask", - (char *) &sun4v_vdev_intmask, - sizeof(sun4v_vdev_intmask)); - if (err == -1) { + (char *) &vdev_intmask, + sizeof(vdev_intmask)); + if (err <= 0) { prom_printf("SUN4V: Fatal error, no vdev " "interrupt-map-mask.\n"); prom_halt(); } + if (err % sizeof(vdev_intmask)) { + prom_printf("SUN4V: Bogus interrupt-map-mask " + "property size %d\n", err); + prom_halt(); + } printk("SUN4V: virtual-devices devhandle[%x]\n", sun4v_vdev_devhandle); } +unsigned int sun4v_vdev_device_interrupt(unsigned int dev_node) +{ + unsigned int irq, reg; + int err, i; + + err = prom_getproperty(dev_node, "interrupts", + (char *) &irq, sizeof(irq)); + if (err <= 0) { + printk("VDEV: Cannot get \"interrupts\" " + "property for OBP node %x\n", dev_node); + return 0; + } + + err = prom_getproperty(dev_node, "reg", + (char *) ®, sizeof(reg)); + if (err <= 0) { + printk("VDEV: Cannot get \"reg\" " + "property for OBP node %x\n", dev_node); + return 0; + } + + for (i = 0; i < vdev_num_intmap; i++) { + if (vdev_intmap[i].phys == (reg & vdev_intmask.phys) && + vdev_intmap[i].irq == (irq & vdev_intmask.interrupt)) { + irq = vdev_intmap[i].cinterrupt; + break; + } + } + + if (i == vdev_num_intmap) { + printk("VDEV: No matching interrupt map entry " + "for OBP node %x\n", dev_node); + return 0; + } + + return sun4v_build_irq(sun4v_vdev_devhandle, irq, 4, 0); +} + static const char *cpu_mid_prop(void) { if (tlb_type == spitfire) -- cgit v1.2.3-18-g5258 From 1daef08a12157923d90ec7a47ead8a97e0d243cc Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 15 Feb 2006 20:35:10 -0800 Subject: [SPARC64]: Fix comment typo in __flush_tlb_kernel_range. Signed-off-by: David S. Miller --- arch/sparc64/mm/ultra.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc64/mm/ultra.S b/arch/sparc64/mm/ultra.S index 8c244932b1c..725f8b34af4 100644 --- a/arch/sparc64/mm/ultra.S +++ b/arch/sparc64/mm/ultra.S @@ -86,7 +86,7 @@ __flush_tlb_pending: /* 26 insns */ .align 32 .globl __flush_tlb_kernel_range -__flush_tlb_kernel_range: /* 14 insns */ +__flush_tlb_kernel_range: /* 16 insns */ /* %o0=start, %o1=end */ cmp %o0, %o1 be,pn %xcc, 2f -- cgit v1.2.3-18-g5258 From de635d833f61ce0f2ad0b3431e6a3323a1c4fed5 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 15 Feb 2006 21:01:31 -0800 Subject: [SPARC64]: Fix flush_tsb_user() on SUN4V. Needs to use physical addressing just like cheetah_plus. Signed-off-by: David S. Miller --- arch/sparc64/mm/tsb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc64/mm/tsb.c b/arch/sparc64/mm/tsb.c index 975242ab88e..3c1ff05038b 100644 --- a/arch/sparc64/mm/tsb.c +++ b/arch/sparc64/mm/tsb.c @@ -58,7 +58,7 @@ void flush_tsb_user(struct mmu_gather *mp) ctx = CTX_HWBITS(mm->context); - if (tlb_type == cheetah_plus) + if (tlb_type == cheetah_plus || tlb_type == hypervisor) base = __pa(tsb); else base = (unsigned long) tsb; -- cgit v1.2.3-18-g5258 From a7b31bac691668a60da8b9892124b7da408e0a0e Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 15 Feb 2006 21:16:42 -0800 Subject: [SPARC64]: Do not write garbage into %pstate in tsb_context_switch(). For SUN4V, we were clobbering %o5 to do the hypervisor call. This clobbers the saved %pstate value and we end up writing garbage into that register as a result. Oops. Signed-off-by: David S. Miller --- arch/sparc64/kernel/tsb.S | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/tsb.S b/arch/sparc64/kernel/tsb.S index be8f0892d72..7996c9d6670 100644 --- a/arch/sparc64/kernel/tsb.S +++ b/arch/sparc64/kernel/tsb.S @@ -265,13 +265,19 @@ __tsb_context_switch: mov SCRATCHPAD_UTSBREG2, %g1 stxa %g2, [%g1] ASI_SCRATCHPAD + /* Save away %o5's %pstate, we have to use %o5 for + * the hypervisor call. + */ + mov %o5, %g1 + mov HV_FAST_MMU_TSB_CTXNON0, %o5 mov 1, %o0 mov %o4, %o1 ta HV_FAST_TRAP + /* Finish up and restore %o5. */ ba,pt %xcc, 9f - nop + mov %g1, %o5 /* SUN4U TSB switch. */ 1: mov TSB_REG, %g1 -- cgit v1.2.3-18-g5258 From c7f81d42d3d07115a7b92e36ade0f3167f75bc55 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 15 Feb 2006 21:21:17 -0800 Subject: [SPARC64]: Don't use ASI_QUAD_LDD_PHYS on SUN4V. Need to use ASI_QUAD_LDD_PHYS_4V instead. Signed-off-by: David S. Miller --- arch/sparc64/kernel/sun4v_tlb_miss.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/sun4v_tlb_miss.S b/arch/sparc64/kernel/sun4v_tlb_miss.S index b3844ee3844..df65d712dcc 100644 --- a/arch/sparc64/kernel/sun4v_tlb_miss.S +++ b/arch/sparc64/kernel/sun4v_tlb_miss.S @@ -57,7 +57,7 @@ sun4v_itlb_miss: COMPUTE_TSB_PTR(%g1, %g4, %g3, %g7) /* Load TSB tag/pte into %g2/%g3 and compare the tag. */ - ldda [%g1] ASI_QUAD_LDD_PHYS, %g2 + ldda [%g1] ASI_QUAD_LDD_PHYS_4V, %g2 cmp %g2, %g6 sethi %hi(PAGE_EXEC), %g7 ldx [%g7 + %lo(PAGE_EXEC)], %g7 @@ -104,7 +104,7 @@ sun4v_dtlb_miss: COMPUTE_TSB_PTR(%g1, %g4, %g3, %g7) /* Load TSB tag/pte into %g2/%g3 and compare the tag. */ - ldda [%g1] ASI_QUAD_LDD_PHYS, %g2 + ldda [%g1] ASI_QUAD_LDD_PHYS_4V, %g2 cmp %g2, %g6 bne,a,pn %xcc, tsb_miss_page_table_walk mov FAULT_CODE_ITLB, %g3 -- cgit v1.2.3-18-g5258 From e7a0453ef82c1433a35ab82d874296fff68f3639 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 15 Feb 2006 22:25:27 -0800 Subject: [SPARC64] PCI: Size TSB correctly on SUN4V. Forgot to multiply by 8 * 1024, oops. Correct the size constant when the virtual-dma arena is 2GB in size, it should bet 256 not 128. Finally, log some info about the TSB at probe time. Signed-off-by: David S. Miller --- arch/sparc64/kernel/pci_sun4v.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c index 13b611db058..902d07c714f 100644 --- a/arch/sparc64/kernel/pci_sun4v.c +++ b/arch/sparc64/kernel/pci_sun4v.c @@ -102,6 +102,7 @@ static void *pci_4v_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr first_page = __get_free_pages(GFP_ATOMIC, order); if (first_page == 0UL) return NULL; + memset((char *)first_page, 0, PAGE_SIZE << order); pcp = pdev->sysdata; @@ -805,11 +806,11 @@ static void pbm_register_toplevel_resources(struct pci_controller_info *p, &pbm->mem_space); } -static void probe_existing_entries(struct pci_pbm_info *pbm, - struct pci_iommu *iommu) +static unsigned long probe_existing_entries(struct pci_pbm_info *pbm, + struct pci_iommu *iommu) { struct pci_iommu_arena *arena = &iommu->arena; - unsigned long i; + unsigned long i, cnt = 0; u32 devhandle; devhandle = pbm->devhandle; @@ -819,9 +820,13 @@ static void probe_existing_entries(struct pci_pbm_info *pbm, ret = pci_sun4v_iommu_getmap(devhandle, HV_PCI_TSBID(0, i), &io_attrs, &ra); - if (ret == HV_EOK) + if (ret == HV_EOK) { + cnt++; __set_bit(i, arena->map); + } } + + return cnt; } static void pci_sun4v_iommu_init(struct pci_pbm_info *pbm) @@ -853,7 +858,7 @@ static void pci_sun4v_iommu_init(struct pci_pbm_info *pbm) case 0x80000000: dma_mask |= 0x7fffffff; - tsbsize = 128; + tsbsize = 256; break; default: @@ -861,6 +866,8 @@ static void pci_sun4v_iommu_init(struct pci_pbm_info *pbm) prom_halt(); }; + tsbsize *= (8 * 1024); + num_tsb_entries = tsbsize / sizeof(iopte_t); dma_offset = vdma[0]; @@ -882,7 +889,10 @@ static void pci_sun4v_iommu_init(struct pci_pbm_info *pbm) memset(iommu->arena.map, 0, sz); iommu->arena.limit = num_tsb_entries; - probe_existing_entries(pbm, iommu); + sz = probe_existing_entries(pbm, iommu); + + printk("%s: TSB entries [%lu], existing mapings [%lu]\n", + pbm->name, num_tsb_entries, sz); } static void pci_sun4v_get_bus_range(struct pci_pbm_info *pbm) -- cgit v1.2.3-18-g5258 From 3d6395cb770b0db9135a853b1742418c99ed2148 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 16 Feb 2006 01:41:41 -0800 Subject: [SPARC64]: Fix tl1 trap state capture/dump on SUN4V. No trap levels above 2 in privileged mode on SUN4V. Signed-off-by: David S. Miller --- arch/sparc64/kernel/etrap.S | 6 ++++++ arch/sparc64/kernel/traps.c | 4 +++- 2 files changed, 9 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/etrap.S b/arch/sparc64/kernel/etrap.S index a0e7d480e5d..149383835c2 100644 --- a/arch/sparc64/kernel/etrap.S +++ b/arch/sparc64/kernel/etrap.S @@ -188,6 +188,11 @@ etraptl1: /* Save tstate/tpc/tnpc of TL 1-->4 and the tl register itself. rdpr %tt, %g3 stx %g3, [%g2 + STACK_BIAS + 0x38] + sethi %hi(is_sun4v), %g3 + lduw [%g3 + %lo(is_sun4v)], %g3 + brnz,pn %g3, finish_tl1_capture + nop + wrpr %g0, 3, %tl rdpr %tstate, %g3 stx %g3, [%g2 + STACK_BIAS + 0x40] @@ -210,6 +215,7 @@ etraptl1: /* Save tstate/tpc/tnpc of TL 1-->4 and the tl register itself. stx %g1, [%g2 + STACK_BIAS + 0x80] +finish_tl1_capture: wrpr %g0, 1, %tl 661: nop .section .sun4v_1insn_patch, "ax" diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c index bedb2f693c7..5956d0a9400 100644 --- a/arch/sparc64/kernel/traps.c +++ b/arch/sparc64/kernel/traps.c @@ -73,10 +73,12 @@ struct tl1_traplog { static void dump_tl1_traplog(struct tl1_traplog *p) { - int i; + int i, limit; printk("TRAPLOG: Error at trap level 0x%lx, dumping track stack.\n", p->tl); + + limit = (tlb_type == hypervisor) ? 2 : 4; for (i = 0; i < 4; i++) { printk(KERN_CRIT "TRAPLOG: Trap level %d TSTATE[%016lx] TPC[%016lx] " -- cgit v1.2.3-18-g5258 From 9b6b46470cc1c52f6917b0cd8b7cf4b5cbc5acf6 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 16 Feb 2006 01:45:49 -0800 Subject: [SPARC64]: Fix bogus call to sun4v_mna in winfixup code. The C function is named sun4v_do_mna not sun4v_mna. Signed-off-by: David S. Miller --- arch/sparc64/kernel/winfixup.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/winfixup.S b/arch/sparc64/kernel/winfixup.S index aca2a98b930..161371370e9 100644 --- a/arch/sparc64/kernel/winfixup.S +++ b/arch/sparc64/kernel/winfixup.S @@ -121,7 +121,7 @@ fill_fixup_mna: cmp %g1, 3 bne,pt %icc, 1f add %sp, PTREGS_OFF, %o0 - call sun4v_mna + call sun4v_do_mna nop ba,a,pt %xcc, rtrap_clr_l6 1: call mem_address_unaligned -- cgit v1.2.3-18-g5258 From 8e42550c683b2ad4869fc4fa438204841fd9b7cc Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 16 Feb 2006 02:18:49 -0800 Subject: [SPARC64]: do_fptrap needs to load the thread reg into %g6. Signed-off-by: David S. Miller --- arch/sparc64/kernel/entry.S | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S index a2842a72f8e..bf40b065bcc 100644 --- a/arch/sparc64/kernel/entry.S +++ b/arch/sparc64/kernel/entry.S @@ -356,6 +356,7 @@ fitos_emul_fini: .globl do_fptrap .align 32 do_fptrap: + TRAP_LOAD_THREAD_REG(%g6, %g1) stx %fsr, [%g6 + TI_XFSR] do_fptrap_after_fsr: ldub [%g6 + TI_FPSAVED], %g3 -- cgit v1.2.3-18-g5258 From 94f8762db9a80ed34252e9fe5fa38be87bb7826b Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 16 Feb 2006 14:26:53 -0800 Subject: [SPARC64]: Add sun4v_cpu_qconf() hypervisor call. Call it from register_one_mondo(). Signed-off-by: David S. Miller --- arch/sparc64/kernel/entry.S | 12 ++++++++++++ arch/sparc64/kernel/irq.c | 26 +++++++------------------- 2 files changed, 19 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S index bf40b065bcc..f5c8a293979 100644 --- a/arch/sparc64/kernel/entry.S +++ b/arch/sparc64/kernel/entry.S @@ -1772,3 +1772,15 @@ sun4v_intr_settarget: retl nop + /* %o0: type + * %o1: queue paddr + * %o2: num queue entries + * + * returns %o0: status + */ + .globl sun4v_cpu_qconf +sun4v_cpu_qconf: + mov HV_FAST_CPU_QCONF, %o5 + ta HV_FAST_TRAP + retl + nop diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index 4d9931d124a..e1729e5189a 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -939,25 +939,13 @@ void init_irqwork_curcpu(void) static void __cpuinit register_one_mondo(unsigned long paddr, unsigned long type) { - register unsigned long func __asm__("%o5"); - register unsigned long arg0 __asm__("%o0"); - register unsigned long arg1 __asm__("%o1"); - register unsigned long arg2 __asm__("%o2"); - - func = HV_FAST_CPU_QCONF; - arg0 = type; - arg1 = paddr; - arg2 = 128; /* XXX Implied by Niagara queue offsets. XXX */ - __asm__ __volatile__("ta %8" - : "=&r" (func), "=&r" (arg0), - "=&r" (arg1), "=&r" (arg2) - : "0" (func), "1" (arg0), - "2" (arg1), "3" (arg2), - "i" (HV_FAST_TRAP)); - - if (arg0 != HV_EOK) { - prom_printf("SUN4V: cpu_qconf(%lu) failed with error %lu\n", - type, func); + unsigned long num_entries = 128; + unsigned long status; + + status = sun4v_cpu_qconf(type, paddr, num_entries); + if (status != HV_EOK) { + prom_printf("SUN4V: sun4v_cpu_qconf(%lu:%lx:%lu) failed, " + "err %lu\n", type, paddr, num_entries, status); prom_halt(); } } -- cgit v1.2.3-18-g5258 From 22780e23c629303474797d17e7f09ad7721ef55b Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 16 Feb 2006 14:37:05 -0800 Subject: [SPARC64]: Set dummy bucket->{imap,iclr} unique on SUN4V. So that free_irq() disable's the IRQ correctly. Signed-off-by: David S. Miller --- arch/sparc64/kernel/irq.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index e1729e5189a..580b4de8b7c 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -143,7 +143,6 @@ void enable_irq(unsigned int irq) { struct ino_bucket *bucket = __bucket(irq); unsigned long imap; - unsigned long tid; imap = bucket->imap; if (imap == 0UL) @@ -169,6 +168,8 @@ void enable_irq(unsigned int irq) printk("sun4v_intr_setstate(%x): " "err(%d)\n", ino, err); } else { + unsigned long tid; + if (tlb_type == cheetah || tlb_type == cheetah_plus) { unsigned long ver; @@ -342,9 +343,12 @@ unsigned int sun4v_build_irq(u32 devhandle, unsigned int devino, int pil, unsign /* Catch accidental accesses to these things. IMAP/ICLR handling * is done by hypervisor calls on sun4v platforms, not by direct * register accesses. + * + * But we need to make them look unique for the disable_irq() logic + * in free_irq(). */ - bucket->imap = ~0UL; - bucket->iclr = ~0UL; + bucket->imap = ~0UL - sysino; + bucket->iclr = ~0UL - sysino; bucket->pil = pil; bucket->flags = flags; @@ -547,7 +551,6 @@ void free_irq(unsigned int irq, void *dev_id) bucket = __bucket(irq); if (bucket != &pil0_dummy_bucket) { struct irq_desc *desc = bucket->irq_info; - unsigned long imap = bucket->imap; int ent, i; for (i = 0; i < MAX_IRQ_DESC_ACTION; i++) { @@ -560,6 +563,8 @@ void free_irq(unsigned int irq, void *dev_id) } if (!desc->action_active_mask) { + unsigned long imap = bucket->imap; + /* This unique interrupt source is now inactive. */ bucket->flags &= ~IBF_ACTIVE; @@ -803,7 +808,6 @@ EXPORT_SYMBOL(probe_irq_off); static int retarget_one_irq(struct irqaction *p, int goal_cpu) { struct ino_bucket *bucket = get_ino_in_irqaction(p) + ivector_table; - unsigned long imap = bucket->imap; while (!cpu_online(goal_cpu)) { if (++goal_cpu >= NR_CPUS) @@ -816,6 +820,7 @@ static int retarget_one_irq(struct irqaction *p, int goal_cpu) sun4v_intr_settarget(ino, goal_cpu); sun4v_intr_setenabled(ino, HV_INTR_ENABLED); } else { + unsigned long imap = bucket->imap; unsigned int tid; if (tlb_type == cheetah || tlb_type == cheetah_plus) { -- cgit v1.2.3-18-g5258 From af02bec66294c76fba181c665c68a31fd4392020 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 16 Feb 2006 16:23:45 -0800 Subject: [SPARC64]: Fix return from trap on SUN4V. We need to set the global register set _AND_ disable PSTATE_IE in %pstate. The original patch sequence was leaving PSTATE_IE enabled when returning to kernel mode, oops. This fixes the random register corruption being seen on SUN4V. Signed-off-by: David S. Miller --- arch/sparc64/kernel/rtrap.S | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/rtrap.S b/arch/sparc64/kernel/rtrap.S index 551f7198200..1e724fe172a 100644 --- a/arch/sparc64/kernel/rtrap.S +++ b/arch/sparc64/kernel/rtrap.S @@ -234,8 +234,10 @@ rt_continue: ldx [%sp + PTREGS_OFF + PT_V9_G1], %g1 /* Normal globals are restored, go to trap globals. */ 661: wrpr %g0, RTRAP_PSTATE_AG_IRQOFF, %pstate - .section .sun4v_1insn_patch, "ax" + nop + .section .sun4v_2insn_patch, "ax" .word 661b + wrpr %g0, RTRAP_PSTATE_IRQOFF, %pstate SET_GL(1) .previous -- cgit v1.2.3-18-g5258 From 14f6689cbb3ec2c194bd770fbe0d6e2d90eb6760 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 16 Feb 2006 20:44:25 -0800 Subject: [SPARC64]: Don't set interrupt state to IDLE in enable_irq(). We'll lose events that way. Signed-off-by: David S. Miller --- arch/sparc64/kernel/irq.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index 580b4de8b7c..6eb44ca5dba 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -163,10 +163,6 @@ void enable_irq(unsigned int irq) if (err != HV_EOK) printk("sun4v_intr_setenabled(%x): err(%d)\n", ino, err); - err = sun4v_intr_setstate(ino, HV_INTR_STATE_IDLE); - if (err != HV_EOK) - printk("sun4v_intr_setstate(%x): " - "err(%d)\n", ino, err); } else { unsigned long tid; -- cgit v1.2.3-18-g5258 From 6154f94f0e1b3984ad2d0bcda586bc8946398b8a Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 16 Feb 2006 23:01:10 -0800 Subject: [SPARC64]: Rewrite pci_intmap_match(). The whole algorithm was wrong. What we need to do is: 1) Walk each PCI bus above this device on the path to the PCI controller nexus, and for each: a) If interrupt-map exists, apply it, record IRQ controller node b) Else, swivel interrupt number using PCI_SLOT(), use PCI bus parent OBP node as controller node c) Walk up to "controller node" until we hit the first PCI bus in this domain, or "controller node" is the PCI controller OBP node 2) If we walked to PCI controller OBP node, we're done. 3) Else, apply PCI controller interrupt-map to interrupt. There is some stuff that needs to be checked out for ebus and isa, but the PCI part is good to go. Signed-off-by: David S. Miller --- arch/sparc64/kernel/pci_common.c | 269 ++++++++++++++++++++++----------------- 1 file changed, 155 insertions(+), 114 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/pci_common.c b/arch/sparc64/kernel/pci_common.c index ab6a2e1b76f..f9101966a74 100644 --- a/arch/sparc64/kernel/pci_common.c +++ b/arch/sparc64/kernel/pci_common.c @@ -541,142 +541,183 @@ void __init pci_assign_unassigned(struct pci_pbm_info *pbm, pci_assign_unassigned(pbm, bus); } -static int __init pci_intmap_match(struct pci_dev *pdev, unsigned int *interrupt) +static inline unsigned int pci_slot_swivel(struct pci_pbm_info *pbm, + struct pci_dev *toplevel_pdev, + struct pci_dev *pdev, + unsigned int interrupt) { - struct linux_prom_pci_intmap bridge_local_intmap[PROM_PCIIMAP_MAX], *intmap; - struct linux_prom_pci_intmask bridge_local_intmask, *intmask; - struct pcidev_cookie *dev_pcp = pdev->sysdata; - struct pci_pbm_info *pbm = dev_pcp->pbm; - struct linux_prom_pci_registers *pregs = dev_pcp->prom_regs; - unsigned int hi, mid, lo, irq; - int i, num_intmap, map_slot; + unsigned int ret; - intmap = &pbm->pbm_intmap[0]; - intmask = &pbm->pbm_intmask; - num_intmap = pbm->num_pbm_intmap; - map_slot = 0; + if (unlikely(interrupt < 1 || interrupt > 4)) { + printk("%s: Device %s interrupt value of %u is strange.\n", + pbm->name, pci_name(pdev), interrupt); + return interrupt; + } - /* If we are underneath a PCI bridge, use PROM register - * property of the parent bridge which is closest to - * the PBM. - * - * However if that parent bridge has interrupt map/mask - * properties of its own we use the PROM register property - * of the next child device on the path to PDEV. - * - * In detail the two cases are (note that the 'X' below is the - * 'next child on the path to PDEV' mentioned above): - * - * 1) PBM --> PCI bus lacking int{map,mask} --> X ... PDEV - * - * Here we use regs of 'PCI bus' device. - * - * 2) PBM --> PCI bus with int{map,mask} --> X ... PDEV - * - * Here we use regs of 'X'. Note that X can be PDEV. - */ - if (pdev->bus->number != pbm->pci_first_busno) { - struct pcidev_cookie *bus_pcp, *regs_pcp; - struct pci_dev *bus_dev, *regs_dev; - int plen; + ret = ((interrupt - 1 + (PCI_SLOT(pdev->devfn) & 3)) & 3) + 1; + + printk("%s: %s IRQ Swivel %s [%x:%x] -> [%x]\n", + pbm->name, pci_name(toplevel_pdev), pci_name(pdev), + interrupt, PCI_SLOT(pdev->devfn), ret); - bus_dev = pdev->bus->self; - bus_pcp = bus_dev->sysdata; - regs_dev = pdev; - regs_pcp = regs_dev->sysdata; + return ret; +} - while (bus_dev->bus && - bus_dev->bus->number != pbm->pci_first_busno && - prom_getproplen(bus_pcp->prom_node, - "interrupt-map") <= 0) { - regs_dev = bus_dev; - regs_pcp = regs_dev->sysdata; +static inline unsigned int pci_apply_intmap(struct pci_pbm_info *pbm, + struct pci_dev *toplevel_pdev, + struct pci_dev *pbus, + struct pci_dev *pdev, + unsigned int interrupt, + unsigned int *cnode) +{ + struct linux_prom_pci_intmap imap[PROM_PCIIMAP_MAX]; + struct linux_prom_pci_intmask imask; + struct pcidev_cookie *pbus_pcp = pbus->sysdata; + struct pcidev_cookie *pdev_pcp = pdev->sysdata; + struct linux_prom_pci_registers *pregs = pdev_pcp->prom_regs; + int plen, num_imap, i; + unsigned int hi, mid, lo, irq, orig_interrupt; + + *cnode = pbus_pcp->prom_node; + + plen = prom_getproperty(pbus_pcp->prom_node, "interrupt-map", + (char *) &imap[0], sizeof(imap)); + if (plen <= 0 || + (plen % sizeof(struct linux_prom_pci_intmap)) != 0) { + printk("%s: Device %s interrupt-map has bad len %d\n", + pbm->name, pci_name(pbus), plen); + goto no_intmap; + } + num_imap = plen / sizeof(struct linux_prom_pci_intmap); + + plen = prom_getproperty(pbus_pcp->prom_node, "interrupt-map-mask", + (char *) &imask, sizeof(imask)); + if (plen <= 0 || + (plen % sizeof(struct linux_prom_pci_intmask)) != 0) { + printk("%s: Device %s interrupt-map-mask has bad len %d\n", + pbm->name, pci_name(pbus), plen); + goto no_intmap; + } - bus_dev = bus_dev->bus->self; - bus_pcp = bus_dev->sysdata; + orig_interrupt = interrupt; + + hi = pregs->phys_hi & imask.phys_hi; + mid = pregs->phys_mid & imask.phys_mid; + lo = pregs->phys_lo & imask.phys_lo; + irq = interrupt & imask.interrupt; + + for (i = 0; i < num_imap; i++) { + if (imap[i].phys_hi == hi && + imap[i].phys_mid == mid && + imap[i].phys_lo == lo && + imap[i].interrupt == irq) { + *cnode = imap[i].cnode; + interrupt = imap[i].cinterrupt; } + } - pregs = regs_pcp->prom_regs; + printk("%s: %s MAP BUS %s DEV %s [%x] -> [%x]\n", + pbm->name, pci_name(toplevel_pdev), + pci_name(pbus), pci_name(pdev), + orig_interrupt, interrupt); +no_intmap: + return interrupt; +} - /* But if the PCI bridge has it's own interrupt map - * and mask properties, use that and the regs of the - * PCI entity at the next level down on the path to the - * device. - */ - plen = prom_getproperty(bus_pcp->prom_node, "interrupt-map", - (char *) &bridge_local_intmap[0], - sizeof(bridge_local_intmap)); - if (plen != -1) { - intmap = &bridge_local_intmap[0]; - num_intmap = plen / sizeof(struct linux_prom_pci_intmap); - plen = prom_getproperty(bus_pcp->prom_node, - "interrupt-map-mask", - (char *) &bridge_local_intmask, - sizeof(bridge_local_intmask)); - if (plen == -1) { - printk("pci_intmap_match: Warning! Bridge has intmap " - "but no intmask.\n"); - printk("pci_intmap_match: Trying to recover.\n"); - return 0; - } +/* For each PCI bus on the way to the root: + * 1) If it has an interrupt-map property, apply it. + * 2) Else, swivel the interrupt number based upon the PCI device number. + * + * Return the "IRQ controller" node. If this is the PBM's device node, + * all interrupt translations are complete, else we should use that node's + * "reg" property to apply the PBM's "interrupt-{map,mask}" to the interrupt. + */ +static unsigned int __init pci_intmap_match_to_root(struct pci_pbm_info *pbm, + struct pci_dev *pdev, + unsigned int *interrupt) +{ + struct pci_dev *toplevel_pdev = pdev; + struct pcidev_cookie *toplevel_pcp = toplevel_pdev->sysdata; + unsigned int cnode = toplevel_pcp->prom_node; - intmask = &bridge_local_intmask; + while (pdev->bus->number != pbm->pci_first_busno) { + struct pci_dev *pbus = pdev->bus->self; + struct pcidev_cookie *pcp = pbus->sysdata; + int plen; - if (pdev->bus->self != bus_dev) - map_slot = 1; + plen = prom_getproplen(pcp->prom_node, "interrupt-map"); + if (plen <= 0) { + *interrupt = pci_slot_swivel(pbm, toplevel_pdev, + pdev, *interrupt); + cnode = pcp->prom_node; } else { - pregs = bus_pcp->prom_regs; - map_slot = 1; + *interrupt = pci_apply_intmap(pbm, toplevel_pdev, + pbus, pdev, + *interrupt, &cnode); + + while (pcp->prom_node != cnode && + pbus->bus->number != pbm->pci_first_busno) { + pbus = pbus->bus->self; + pcp = pbus->sysdata; + } } - } + pdev = pbus; - if (map_slot) { - *interrupt = ((*interrupt - - 1 - + PCI_SLOT(pdev->devfn)) & 0x3) + 1; + if (cnode == pbm->prom_node) + break; } - hi = pregs->phys_hi & intmask->phys_hi; - mid = pregs->phys_mid & intmask->phys_mid; - lo = pregs->phys_lo & intmask->phys_lo; - irq = *interrupt & intmask->interrupt; - - for (i = 0; i < num_intmap; i++) { - if (intmap[i].phys_hi == hi && - intmap[i].phys_mid == mid && - intmap[i].phys_lo == lo && - intmap[i].interrupt == irq) { - *interrupt = intmap[i].cinterrupt; - printk("PCI-IRQ: Routing bus[%2x] slot[%2x] map[%d] to INO[%02x]\n", - pdev->bus->number, PCI_SLOT(pdev->devfn), - map_slot, *interrupt); - return 1; - } + return cnode; +} + +static int __init pci_intmap_match(struct pci_dev *pdev, unsigned int *interrupt) +{ + struct pcidev_cookie *dev_pcp = pdev->sysdata; + struct pci_pbm_info *pbm = dev_pcp->pbm; + struct linux_prom_pci_registers reg; + unsigned int hi, mid, lo, irq; + int i, cnode, plen; + + cnode = pci_intmap_match_to_root(pbm, pdev, interrupt); + if (cnode == pbm->prom_node) + goto success; + + plen = prom_getproperty(cnode, "reg", (char *) ®, sizeof(reg)); + if (plen <= 0 || + (plen % sizeof(struct linux_prom_pci_registers)) != 0) { + printk("%s: OBP node %x reg property has bad len %d\n", + pbm->name, cnode, plen); + goto fail; } - /* We will run this code even if pbm->num_pbm_intmap is zero, just so - * we can apply the slot mapping to the PROM interrupt property value. - * So do not spit out these warnings in that case. - */ - if (num_intmap != 0) { - /* Print it both to OBP console and kernel one so that if bootup - * hangs here the user has the information to report. - */ - prom_printf("pci_intmap_match: bus %02x, devfn %02x: ", - pdev->bus->number, pdev->devfn); - prom_printf("IRQ [%08x.%08x.%08x.%08x] not found in interrupt-map\n", - pregs->phys_hi, pregs->phys_mid, pregs->phys_lo, *interrupt); - prom_printf("Please email this information to davem@redhat.com\n"); - - printk("pci_intmap_match: bus %02x, devfn %02x: ", - pdev->bus->number, pdev->devfn); - printk("IRQ [%08x.%08x.%08x.%08x] not found in interrupt-map\n", - pregs->phys_hi, pregs->phys_mid, pregs->phys_lo, *interrupt); - printk("Please email this information to davem@redhat.com\n"); + hi = reg.phys_hi & pbm->pbm_intmask.phys_hi; + mid = reg.phys_mid & pbm->pbm_intmask.phys_mid; + lo = reg.phys_lo & pbm->pbm_intmask.phys_lo; + irq = *interrupt & pbm->pbm_intmask.interrupt; + + for (i = 0; i < pbm->num_pbm_intmap; i++) { + struct linux_prom_pci_intmap *intmap; + + intmap = &pbm->pbm_intmap[i]; + + if (intmap->phys_hi == hi && + intmap->phys_mid == mid && + intmap->phys_lo == lo && + intmap->interrupt == irq) { + *interrupt = intmap->cinterrupt; + goto success; + } } +fail: return 0; + +success: + printk("PCI-IRQ: Routing bus[%2x] slot[%2x] to INO[%02x]\n", + pdev->bus->number, PCI_SLOT(pdev->devfn), + *interrupt); + return 1; } static void __init pdev_fixup_irq(struct pci_dev *pdev) -- cgit v1.2.3-18-g5258 From 19a0d585e80e84b54bb9bf120bf0c826045dd3dd Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 17 Feb 2006 01:17:21 -0800 Subject: [SPARC64]: Disable smp_report_regs() for now. For 32 cpus and a slow console, it just wedges the machine especially with DETECT_SOFTLOCKUP enabled. Signed-off-by: David S. Miller --- arch/sparc64/kernel/process.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c index 803eea4dc4f..d00cb7ad89b 100644 --- a/arch/sparc64/kernel/process.c +++ b/arch/sparc64/kernel/process.c @@ -355,6 +355,7 @@ void show_regs(struct pt_regs *regs) extern long etrap, etraptl1; #endif __show_regs(regs); +#if 0 #ifdef CONFIG_SMP { extern void smp_report_regs(void); @@ -362,6 +363,7 @@ void show_regs(struct pt_regs *regs) smp_report_regs(); } #endif +#endif #ifdef VERBOSE_SHOWREGS if (regs->tpc >= &etrap && regs->tpc < &etraptl1 && -- cgit v1.2.3-18-g5258 From 72aff53f1fe74153eccef303ab2f79de888d248c Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 17 Feb 2006 01:29:17 -0800 Subject: [SPARC64]: Get SUN4V SMP working. The sibling cpu bringup is extremely fragile. We can only perform the most basic calls until we take over the trap table from the firmware/hypervisor on the new cpu. This means no accesses to %g4, %g5, %g6 since those can't be TLB translated without our trap handlers. In order to achieve this: 1) Change sun4v_init_mondo_queues() so that it can operate in several modes. It can allocate the queues, or install them in the current processor, or both. The boot cpu does both in it's call early on. Later, the boot cpu allocates the sibling cpu queue, starts the sibling cpu, then the sibling cpu loads them in. 2) init_cur_cpu_trap() is changed to take the current_thread_info() as an argument instead of reading %g6 directly on the current cpu. 3) Create a trampoline stack for the sibling cpus. We do our basic kernel calls using this stack, which is locked into the kernel image, then go to our proper thread stack after taking over the trap table. 4) While we are in this delicate startup state, we put 0xdeadbeef into %g4/%g5/%g6 in order to catch accidental accesses. 5) On the final prom_set_trap_table*() call, we put &init_thread_union into %g6. This is a hack to make prom_world(0) work. All that wants to do is restore the %asi register using get_thread_current_ds(). Longer term we should just do the OBP calls to set the trap table by hand just like we do for everything else. This would avoid that silly prom_world(0) issue, then we can remove the init_thread_union hack. Signed-off-by: David S. Miller --- arch/sparc64/kernel/irq.c | 30 ++++++++----- arch/sparc64/kernel/setup.c | 2 +- arch/sparc64/kernel/smp.c | 6 +++ arch/sparc64/kernel/trampoline.S | 92 ++++++++++++++++++++++++---------------- arch/sparc64/kernel/traps.c | 4 +- 5 files changed, 84 insertions(+), 50 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index 6eb44ca5dba..bb0bb34555d 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -1018,21 +1018,29 @@ static void __cpuinit init_cpu_send_mondo_info(struct trap_per_cpu *tb, int use_ } /* Allocate and register the mondo and error queues for this cpu. */ -void __cpuinit sun4v_init_mondo_queues(int use_bootmem) +void __cpuinit sun4v_init_mondo_queues(int use_bootmem, int cpu, int alloc, int load) { - int cpu = hard_smp_processor_id(); struct trap_per_cpu *tb = &trap_block[cpu]; - alloc_one_mondo(&tb->cpu_mondo_pa, use_bootmem); - alloc_one_mondo(&tb->dev_mondo_pa, use_bootmem); - alloc_one_mondo(&tb->resum_mondo_pa, use_bootmem); - alloc_one_kbuf(&tb->resum_kernel_buf_pa, use_bootmem); - alloc_one_mondo(&tb->nonresum_mondo_pa, use_bootmem); - alloc_one_kbuf(&tb->nonresum_kernel_buf_pa, use_bootmem); + if (alloc) { + alloc_one_mondo(&tb->cpu_mondo_pa, use_bootmem); + alloc_one_mondo(&tb->dev_mondo_pa, use_bootmem); + alloc_one_mondo(&tb->resum_mondo_pa, use_bootmem); + alloc_one_kbuf(&tb->resum_kernel_buf_pa, use_bootmem); + alloc_one_mondo(&tb->nonresum_mondo_pa, use_bootmem); + alloc_one_kbuf(&tb->nonresum_kernel_buf_pa, use_bootmem); - init_cpu_send_mondo_info(tb, use_bootmem); + init_cpu_send_mondo_info(tb, use_bootmem); + } - sun4v_register_mondo_queues(cpu); + if (load) { + if (cpu != hard_smp_processor_id()) { + prom_printf("SUN4V: init mondo on cpu %d not %d\n", + cpu, hard_smp_processor_id()); + prom_halt(); + } + sun4v_register_mondo_queues(cpu); + } } /* Only invoked on boot processor. */ @@ -1043,7 +1051,7 @@ void __init init_IRQ(void) memset(&ivector_table[0], 0, sizeof(ivector_table)); if (tlb_type == hypervisor) - sun4v_init_mondo_queues(1); + sun4v_init_mondo_queues(1, hard_smp_processor_id(), 1, 1); /* We need to clear any IRQ's pending in the soft interrupt * registers, a spurious one could be left around from the diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index 06807cf95ee..9b0c409d5b6 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -384,7 +384,7 @@ void __init setup_arch(char **cmdline_p) paging_init(); /* Get boot processor trap_block[] setup. */ - init_cur_cpu_trap(); + init_cur_cpu_trap(current_thread_info()); } static int __init set_preferred_console(void) diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 527dfd7ae21..b586345fe3b 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -316,6 +316,8 @@ static void smp_synchronize_one_tick(int cpu) spin_unlock_irqrestore(&itc_sync_lock, flags); } +extern void sun4v_init_mondo_queues(int use_bootmem, int cpu, int alloc, int load); + extern unsigned long sparc64_cpu_startup; /* The OBP cpu startup callback truncates the 3rd arg cookie to @@ -339,6 +341,9 @@ static int __devinit smp_boot_one_cpu(unsigned int cpu) cpu_set(cpu, cpu_callout_map); if (tlb_type == hypervisor) { + /* Alloc the mondo queues, cpu will load them. */ + sun4v_init_mondo_queues(0, cpu, 1, 0); + prom_startcpu_cpuid(cpu, entry, cookie); } else { int cpu_node; @@ -352,6 +357,7 @@ static int __devinit smp_boot_one_cpu(unsigned int cpu) break; udelay(100); } + if (callin_flag) { ret = 0; } else { diff --git a/arch/sparc64/kernel/trampoline.S b/arch/sparc64/kernel/trampoline.S index b9c9f54b0a0..a4dc01a3d23 100644 --- a/arch/sparc64/kernel/trampoline.S +++ b/arch/sparc64/kernel/trampoline.S @@ -30,12 +30,16 @@ itlb_load: dtlb_load: .asciz "SUNW,dtlb-load" + /* XXX __cpuinit this thing XXX */ +#define TRAMP_STACK_SIZE 1024 + .align 16 +tramp_stack: + .skip TRAMP_STACK_SIZE + .text .align 8 .globl sparc64_cpu_startup, sparc64_cpu_startup_end sparc64_cpu_startup: - flushw - BRANCH_IF_SUN4V(g1, niagara_startup) BRANCH_IF_CHEETAH_BASE(g1, g5, cheetah_startup) BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g1, g5, cheetah_plus_startup) @@ -58,6 +62,7 @@ cheetah_startup: or %g5, DCU_DM | DCU_IM | DCU_DC | DCU_IC, %g5 stxa %g5, [%g0] ASI_DCU_CONTROL_REG membar #Sync + /* fallthru */ cheetah_generic_startup: mov TSB_EXTENSION_P, %g3 @@ -90,19 +95,17 @@ spitfire_startup: membar #Sync startup_continue: - wrpr %g0, 15, %pil - sethi %hi(0x80000000), %g2 sllx %g2, 32, %g2 wr %g2, 0, %tick_cmpr + mov %o0, %l0 + BRANCH_IF_SUN4V(g1, niagara_lock_tlb) /* Call OBP by hand to lock KERNBASE into i/d tlbs. * We lock 2 consequetive entries if we are 'bigkernel'. */ - mov %o0, %l0 - sethi %hi(prom_entry_lock), %g2 1: ldstub [%g2 + %lo(prom_entry_lock)], %g1 membar #StoreLoad | #StoreStore @@ -112,7 +115,6 @@ startup_continue: sethi %hi(p1275buf), %g2 or %g2, %lo(p1275buf), %g2 ldx [%g2 + 0x10], %l2 - mov %sp, %l1 add %l2, -(192 + 128), %sp flushw @@ -308,18 +310,9 @@ niagara_lock_tlb: ta HV_FAST_TRAP after_lock_tlb: - mov %l1, %sp - flushw - - mov %l0, %o0 - wrpr %g0, (PSTATE_PRIV | PSTATE_PEF), %pstate wr %g0, 0, %fprs - /* XXX Buggy PROM... */ - srl %o0, 0, %o0 - ldx [%o0], %g6 - wr %g0, ASI_P, %asi mov PRIMARY_CONTEXT, %g7 @@ -341,22 +334,25 @@ after_lock_tlb: membar #Sync - mov 1, %g5 - sllx %g5, THREAD_SHIFT, %g5 - sub %g5, (STACKFRAME_SZ + STACK_BIAS), %g5 - add %g6, %g5, %sp + /* Everything we do here, until we properly take over the + * trap table, must be done with extreme care. We cannot + * make any references to %g6 (current thread pointer), + * %g4 (current task pointer), or %g5 (base of current cpu's + * per-cpu area) until we properly take over the trap table + * from the firmware and hypervisor. + * + * Get onto temporary stack which is in the locked kernel image. + */ + sethi %hi(tramp_stack), %g1 + or %g1, %lo(tramp_stack), %g1 + add %g1, TRAMP_STACK_SIZE, %g1 + sub %g1, STACKFRAME_SZ + STACK_BIAS, %sp mov 0, %fp - wrpr %g0, 0, %wstate - wrpr %g0, 0, %tl - - /* Load TBA, then we can resurface. */ - sethi %hi(sparc64_ttable_tl0), %g5 - wrpr %g5, %tba - - ldx [%g6 + TI_TASK], %g4 - - wrpr %g0, 0, %wstate + /* Put garbage in these registers to trap any access to them. */ + set 0xdeadbeef, %g4 + set 0xdeadbeef, %g5 + set 0xdeadbeef, %g6 call init_irqwork_curcpu nop @@ -367,11 +363,17 @@ after_lock_tlb: bne,pt %icc, 1f nop + call hard_smp_processor_id + nop + + mov %o0, %o1 + mov 0, %o0 + mov 0, %o2 call sun4v_init_mondo_queues - mov 0, %o0 + mov 1, %o3 1: call init_cur_cpu_trap - nop + ldx [%l0], %o0 /* Start using proper page size encodings in ctx register. */ sethi %hi(sparc64_kern_pri_context), %g3 @@ -386,9 +388,14 @@ after_lock_tlb: membar #Sync - rdpr %pstate, %o1 - or %o1, PSTATE_IE, %o1 - wrpr %o1, 0, %pstate + wrpr %g0, 0, %wstate + + /* As a hack, put &init_thread_union into %g6. + * prom_world() loads from here to restore the %asi + * register. + */ + sethi %hi(init_thread_union), %g6 + or %g6, %lo(init_thread_union), %g6 sethi %hi(is_sun4v), %o0 lduw [%o0 + %lo(is_sun4v)], %o0 @@ -418,7 +425,20 @@ after_lock_tlb: 1: call prom_set_trap_table sethi %hi(sparc64_ttable_tl0), %o0 -2: call smp_callin +2: ldx [%l0], %g6 + ldx [%g6 + TI_TASK], %g4 + + mov 1, %g5 + sllx %g5, THREAD_SHIFT, %g5 + sub %g5, (STACKFRAME_SZ + STACK_BIAS), %g5 + add %g6, %g5, %sp + mov 0, %fp + + rdpr %pstate, %o1 + or %o1, PSTATE_IE, %o1 + wrpr %o1, 0, %pstate + + call smp_callin nop call cpu_idle mov 0, %o0 diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c index 5956d0a9400..c9484ae5bb8 100644 --- a/arch/sparc64/kernel/traps.c +++ b/arch/sparc64/kernel/traps.c @@ -2413,12 +2413,12 @@ struct trap_per_cpu trap_block[NR_CPUS]; /* This can get invoked before sched_init() so play it super safe * and use hard_smp_processor_id(). */ -void init_cur_cpu_trap(void) +void init_cur_cpu_trap(struct thread_info *t) { int cpu = hard_smp_processor_id(); struct trap_per_cpu *p = &trap_block[cpu]; - p->thread = current_thread_info(); + p->thread = t; p->pgd_paddr = 0; } -- cgit v1.2.3-18-g5258 From 101d5c18a928ef82b6c7bf99a9eaa536b5ccf593 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 17 Feb 2006 08:20:18 -0800 Subject: [SPARC64]: Fix PCI IRQ probing regression. If the top-level cnode had multi entries in it's "reg" property, we'd fail. The buffer wasn't large enough in such cases. Signed-off-by: David S. Miller --- arch/sparc64/kernel/pci_common.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/pci_common.c b/arch/sparc64/kernel/pci_common.c index f9101966a74..1448294a237 100644 --- a/arch/sparc64/kernel/pci_common.c +++ b/arch/sparc64/kernel/pci_common.c @@ -675,7 +675,7 @@ static int __init pci_intmap_match(struct pci_dev *pdev, unsigned int *interrupt { struct pcidev_cookie *dev_pcp = pdev->sysdata; struct pci_pbm_info *pbm = dev_pcp->pbm; - struct linux_prom_pci_registers reg; + struct linux_prom_pci_registers reg[PROMREG_MAX]; unsigned int hi, mid, lo, irq; int i, cnode, plen; @@ -683,7 +683,7 @@ static int __init pci_intmap_match(struct pci_dev *pdev, unsigned int *interrupt if (cnode == pbm->prom_node) goto success; - plen = prom_getproperty(cnode, "reg", (char *) ®, sizeof(reg)); + plen = prom_getproperty(cnode, "reg", (char *) reg, sizeof(reg)); if (plen <= 0 || (plen % sizeof(struct linux_prom_pci_registers)) != 0) { printk("%s: OBP node %x reg property has bad len %d\n", @@ -691,9 +691,9 @@ static int __init pci_intmap_match(struct pci_dev *pdev, unsigned int *interrupt goto fail; } - hi = reg.phys_hi & pbm->pbm_intmask.phys_hi; - mid = reg.phys_mid & pbm->pbm_intmask.phys_mid; - lo = reg.phys_lo & pbm->pbm_intmask.phys_lo; + hi = reg[0].phys_hi & pbm->pbm_intmask.phys_hi; + mid = reg[0].phys_mid & pbm->pbm_intmask.phys_mid; + lo = reg[0].phys_lo & pbm->pbm_intmask.phys_lo; irq = *interrupt & pbm->pbm_intmask.interrupt; for (i = 0; i < pbm->num_pbm_intmap; i++) { -- cgit v1.2.3-18-g5258 From ebd8c56c5ae154e2c6cfb7453a76a4e7265b2377 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 17 Feb 2006 08:38:06 -0800 Subject: [SPARC64]: Fix uniprocessor IRQ targetting on SUN4V. We need to use the real hardware processor ID when targetting interrupts, not the "define to 0" thing the uniprocessor build gives us. Also, fill in the Node-ID and Agent-ID fields properly on sun4u/Safari. Signed-off-by: David S. Miller --- arch/sparc64/kernel/entry.S | 4 +- arch/sparc64/kernel/irq.c | 98 ++++++++++++++++++++++----------------------- arch/sparc64/kernel/setup.c | 6 +-- 3 files changed, 53 insertions(+), 55 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S index f5c8a293979..bd332e41532 100644 --- a/arch/sparc64/kernel/entry.S +++ b/arch/sparc64/kernel/entry.S @@ -1692,10 +1692,12 @@ __flushw_user: #ifdef CONFIG_SMP .globl hard_smp_processor_id hard_smp_processor_id: +#endif + .globl real_hard_smp_processor_id +real_hard_smp_processor_id: __GET_CPUID(%o0) retl nop -#endif /* %o0: devhandle * %o1: devino diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index bb0bb34555d..712b16cdd5f 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -138,11 +138,48 @@ out_unlock: return 0; } +extern unsigned long real_hard_smp_processor_id(void); + +static unsigned int sun4u_compute_tid(unsigned long imap, unsigned long cpuid) +{ + unsigned int tid; + + if (this_is_starfire) { + tid = starfire_translate(imap, cpuid); + tid <<= IMAP_TID_SHIFT; + tid &= IMAP_TID_UPA; + } else { + if (tlb_type == cheetah || tlb_type == cheetah_plus) { + unsigned long ver; + + __asm__ ("rdpr %%ver, %0" : "=r" (ver)); + if ((ver >> 32UL) == __JALAPENO_ID || + (ver >> 32UL) == __SERRANO_ID) { + tid = cpuid << IMAP_TID_SHIFT; + tid &= IMAP_TID_JBUS; + } else { + unsigned int a = cpuid & 0x1f; + unsigned int n = (cpuid >> 5) & 0x1f; + + tid = ((a << IMAP_AID_SHIFT) | + (n << IMAP_NID_SHIFT)); + tid &= (IMAP_AID_SAFARI | + IMAP_NID_SAFARI);; + } + } else { + tid = cpuid << IMAP_TID_SHIFT; + tid &= IMAP_TID_UPA; + } + } + + return tid; +} + /* Now these are always passed a true fully specified sun4u INO. */ void enable_irq(unsigned int irq) { struct ino_bucket *bucket = __bucket(irq); - unsigned long imap; + unsigned long imap, cpuid; imap = bucket->imap; if (imap == 0UL) @@ -150,54 +187,25 @@ void enable_irq(unsigned int irq) preempt_disable(); + /* This gets the physical processor ID, even on uniprocessor, + * so we can always program the interrupt target correctly. + */ + cpuid = real_hard_smp_processor_id(); + if (tlb_type == hypervisor) { unsigned int ino = __irq_ino(irq); - int cpu = hard_smp_processor_id(); int err; - err = sun4v_intr_settarget(ino, cpu); + err = sun4v_intr_settarget(ino, cpuid); if (err != HV_EOK) - printk("sun4v_intr_settarget(%x,%d): err(%d)\n", - ino, cpu, err); + printk("sun4v_intr_settarget(%x,%lu): err(%d)\n", + ino, cpuid, err); err = sun4v_intr_setenabled(ino, HV_INTR_ENABLED); if (err != HV_EOK) printk("sun4v_intr_setenabled(%x): err(%d)\n", ino, err); } else { - unsigned long tid; - - if (tlb_type == cheetah || tlb_type == cheetah_plus) { - unsigned long ver; - - __asm__ ("rdpr %%ver, %0" : "=r" (ver)); - if ((ver >> 32) == __JALAPENO_ID || - (ver >> 32) == __SERRANO_ID) { - /* We set it to our JBUS ID. */ - __asm__ __volatile__("ldxa [%%g0] %1, %0" - : "=r" (tid) - : "i" (ASI_JBUS_CONFIG)); - tid = ((tid & (0x1fUL<<17)) << 9); - tid &= IMAP_TID_JBUS; - } else { - /* We set it to our Safari AID. */ - __asm__ __volatile__("ldxa [%%g0] %1, %0" - : "=r" (tid) - : "i"(ASI_SAFARI_CONFIG)); - tid = ((tid & (0x3ffUL<<17)) << 9); - tid &= IMAP_AID_SAFARI; - } - } else if (this_is_starfire == 0) { - /* We set it to our UPA MID. */ - __asm__ __volatile__("ldxa [%%g0] %1, %0" - : "=r" (tid) - : "i" (ASI_UPA_CONFIG)); - tid = ((tid & UPA_CONFIG_MID) << 9); - tid &= IMAP_TID_UPA; - } else { - tid = (starfire_translate(imap, - smp_processor_id()) << 26); - tid &= IMAP_TID_UPA; - } + unsigned int tid = sun4u_compute_tid(imap, cpuid); /* NOTE NOTE NOTE, IGN and INO are read-only, IGN is a product * of this SYSIO's preconfigured IGN in the SYSIO Control @@ -817,18 +825,8 @@ static int retarget_one_irq(struct irqaction *p, int goal_cpu) sun4v_intr_setenabled(ino, HV_INTR_ENABLED); } else { unsigned long imap = bucket->imap; - unsigned int tid; + unsigned int tid = sun4u_compute_tid(imap, goal_cpu); - if (tlb_type == cheetah || tlb_type == cheetah_plus) { - tid = goal_cpu << 26; - tid &= IMAP_AID_SAFARI; - } else if (this_is_starfire == 0) { - tid = goal_cpu << 26; - tid &= IMAP_TID_UPA; - } else { - tid = (starfire_translate(imap, goal_cpu) << 26); - tid &= IMAP_TID_UPA; - } upa_writel(tid | IMAP_VALID, imap); } diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index 9b0c409d5b6..77066f1bbe2 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -222,7 +222,6 @@ static struct pt_regs fake_swapper_regs = { { 0, }, 0, 0, 0, 0 }; static void __init per_cpu_patch(void) { -#ifdef CONFIG_SMP struct cpuid_patch_entry *p; unsigned long ver; int is_jbus; @@ -233,8 +232,8 @@ static void __init per_cpu_patch(void) is_jbus = 0; if (tlb_type != hypervisor) { __asm__ ("rdpr %%ver, %0" : "=r" (ver)); - is_jbus = ((ver >> 32) == __JALAPENO_ID || - (ver >> 32) == __SERRANO_ID); + is_jbus = ((ver >> 32UL) == __JALAPENO_ID || + (ver >> 32UL) == __SERRANO_ID); } p = &__cpuid_patch; @@ -279,7 +278,6 @@ static void __init per_cpu_patch(void) p++; } -#endif } static void __init sun4v_patch(void) -- cgit v1.2.3-18-g5258 From 3b3ab2eb9cf07ef1bc7a676c19aab994adb41a87 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 17 Feb 2006 09:54:42 -0800 Subject: [SPARC64]: Use phys tsb address in tsb_insert() in SUN4V. Signed-off-by: David S. Miller --- arch/sparc64/mm/init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 6f860c39db8..0137d3dc6ae 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -252,7 +252,7 @@ static inline void tsb_insert(struct tsb *ent, unsigned long tag, unsigned long { unsigned long tsb_addr = (unsigned long) ent; - if (tlb_type == cheetah_plus) + if (tlb_type == cheetah_plus || tlb_type == hypervisor) tsb_addr = __pa(tsb_addr); __tsb_insert(tsb_addr, tag, pte); -- cgit v1.2.3-18-g5258 From 46f860471483dce9ba5ce682a69c61cbceb54e52 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 17 Feb 2006 10:28:24 -0800 Subject: [SPARC64]: Put SUN4V ITSB miss into correct trap table entry. It's 0x9 not 0xb. Signed-off-by: David S. Miller --- arch/sparc64/kernel/ttable.S | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/ttable.S b/arch/sparc64/kernel/ttable.S index a9d210e11eb..d5a8dd52d1f 100644 --- a/arch/sparc64/kernel/ttable.S +++ b/arch/sparc64/kernel/ttable.S @@ -18,11 +18,10 @@ tl0_resv000: BOOT_KERNEL BTRAP(0x1) BTRAP(0x2) BTRAP(0x3) tl0_resv004: BTRAP(0x4) BTRAP(0x5) BTRAP(0x6) BTRAP(0x7) tl0_iax: membar #Sync TRAP_NOSAVE_7INSNS(__spitfire_insn_access_exception) -tl0_resv009: BTRAP(0x9) +tl0_itsb_4v: SUN4V_ITSB_MISS tl0_iae: membar #Sync TRAP_NOSAVE_7INSNS(__spitfire_access_error) -tl0_itsb_4v: SUN4V_ITSB_MISS -tl0_resv00c: BTRAP(0xc) BTRAP(0xd) BTRAP(0xe) BTRAP(0xf) +tl0_resv00b: BTRAP(0xb) BTRAP(0xc) BTRAP(0xd) BTRAP(0xe) BTRAP(0xf) tl0_ill: membar #Sync TRAP_7INSNS(do_illegal_instruction) tl0_privop: TRAP(do_privop) @@ -182,11 +181,10 @@ sparc64_ttable_tl1: tl1_resv000: BOOT_KERNEL BTRAPTL1(0x1) BTRAPTL1(0x2) BTRAPTL1(0x3) tl1_resv004: BTRAPTL1(0x4) BTRAPTL1(0x5) BTRAPTL1(0x6) BTRAPTL1(0x7) tl1_iax: TRAP_NOSAVE(__spitfire_insn_access_exception_tl1) -tl1_resv009: BTRAPTL1(0x9) +tl1_itsb_4v: SUN4V_ITSB_MISS tl1_iae: membar #Sync TRAP_NOSAVE_7INSNS(__spitfire_access_error) -tl1_itsb_4v: SUN4V_ITSB_MISS -tl1_resv00c: BTRAPTL1(0xc) BTRAPTL1(0xd) BTRAPTL1(0xe) BTRAPTL1(0xf) +tl1_resv00b: BTRAPTL1(0xb) BTRAPTL1(0xc) BTRAPTL1(0xd) BTRAPTL1(0xe) BTRAPTL1(0xf) tl1_ill: TRAPTL1(do_ill_tl1) tl1_privop: BTRAPTL1(0x11) tl1_resv012: BTRAPTL1(0x12) BTRAPTL1(0x13) BTRAPTL1(0x14) BTRAPTL1(0x15) -- cgit v1.2.3-18-g5258 From c857e3fdbc306e95fdcaad1d8f3ea6bc8e7eea99 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 17 Feb 2006 10:35:23 -0800 Subject: [SPARC64]: __bzero_noasi --> __clear_user Signed-off-by: David S. Miller --- arch/sparc64/kernel/sparc64_ksyms.c | 2 +- arch/sparc64/lib/bzero.S | 18 +++++++++--------- 2 files changed, 10 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/sparc64_ksyms.c b/arch/sparc64/kernel/sparc64_ksyms.c index f1f01378d07..801fc0ce484 100644 --- a/arch/sparc64/kernel/sparc64_ksyms.c +++ b/arch/sparc64/kernel/sparc64_ksyms.c @@ -335,7 +335,7 @@ EXPORT_SYMBOL(copy_to_user_fixup); EXPORT_SYMBOL(copy_from_user_fixup); EXPORT_SYMBOL(copy_in_user_fixup); EXPORT_SYMBOL(__strncpy_from_user); -EXPORT_SYMBOL(__bzero_noasi); +EXPORT_SYMBOL(__clear_user); /* Various address conversion macros use this. */ EXPORT_SYMBOL(phys_base); diff --git a/arch/sparc64/lib/bzero.S b/arch/sparc64/lib/bzero.S index 1d2abcfa4e5..c7bbae8c590 100644 --- a/arch/sparc64/lib/bzero.S +++ b/arch/sparc64/lib/bzero.S @@ -98,12 +98,12 @@ __bzero_done: .text; \ .align 4; - .globl __bzero_noasi - .type __bzero_noasi, #function -__bzero_noasi: /* %o0=buf, %o1=len */ - brz,pn %o1, __bzero_noasi_done + .globl __clear_user + .type __clear_user, #function +__clear_user: /* %o0=buf, %o1=len */ + brz,pn %o1, __clear_user_done cmp %o1, 16 - bl,pn %icc, __bzero_noasi_tiny + bl,pn %icc, __clear_user_tiny EX_ST(prefetcha [%o0 + 0x00] %asi, #n_writes) andcc %o0, 0x3, %g0 be,pt %icc, 2f @@ -145,14 +145,14 @@ __bzero_noasi: /* %o0=buf, %o1=len */ subcc %g1, 8, %g1 bne,pt %icc, 5b add %o0, 0x8, %o0 -6: brz,pt %o1, __bzero_noasi_done +6: brz,pt %o1, __clear_user_done nop -__bzero_noasi_tiny: +__clear_user_tiny: 1: EX_ST(stba %g0, [%o0 + 0x00] %asi) subcc %o1, 1, %o1 bne,pt %icc, 1b add %o0, 1, %o0 -__bzero_noasi_done: +__clear_user_done: retl clr %o0 - .size __bzero_noasi, .-__bzero_noasi + .size __clear_user, .-__clear_user -- cgit v1.2.3-18-g5258 From 3f19a84e39619053f117bd5bb9183c5bfea7db45 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 17 Feb 2006 12:03:20 -0800 Subject: [SPARC64]: Set associativity of kernel TSB descriptor correctly. It should be 1, not 0. Signed-off-by: David S. Miller --- arch/sparc64/mm/init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 0137d3dc6ae..950d58082e2 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -1056,7 +1056,7 @@ static void __init sun4v_ktsb_init(void) break; }; - ktsb_descr[0].assoc = 0; + ktsb_descr[0].assoc = 1; ktsb_descr[0].num_ttes = KERNEL_TSB_NENTRIES; ktsb_descr[0].ctx_idx = 0; ktsb_descr[0].tsb_base = ktsb_pa; -- cgit v1.2.3-18-g5258 From 3763be32d591cacf808c36390a8af3f2784cde5f Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 17 Feb 2006 12:33:13 -0800 Subject: [SPARC64]: Define ARCH_HAS_READ_CURRENT_TIMER. This gives more consistent bogomips and delay() semantics, especially on sun4v. It gives weird looking values though... Signed-off-by: David S. Miller --- arch/sparc64/kernel/time.c | 8 +------- arch/sparc64/lib/delay.c | 19 ++++++++----------- 2 files changed, 9 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c index 7041146f86f..f6275adbc81 100644 --- a/arch/sparc64/kernel/time.c +++ b/arch/sparc64/kernel/time.c @@ -1029,11 +1029,10 @@ static void sparc64_start_timers(irqreturn_t (*cfunc)(int, void *, struct pt_reg } struct freq_table { - unsigned long udelay_val_ref; unsigned long clock_tick_ref; unsigned int ref_freq; }; -static DEFINE_PER_CPU(struct freq_table, sparc64_freq_table) = { 0, 0, 0 }; +static DEFINE_PER_CPU(struct freq_table, sparc64_freq_table) = { 0, 0 }; unsigned long sparc64_get_clock_tick(unsigned int cpu) { @@ -1055,16 +1054,11 @@ static int sparc64_cpufreq_notifier(struct notifier_block *nb, unsigned long val if (!ft->ref_freq) { ft->ref_freq = freq->old; - ft->udelay_val_ref = cpu_data(cpu).udelay_val; ft->clock_tick_ref = cpu_data(cpu).clock_tick; } if ((val == CPUFREQ_PRECHANGE && freq->old < freq->new) || (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) || (val == CPUFREQ_RESUMECHANGE)) { - cpu_data(cpu).udelay_val = - cpufreq_scale(ft->udelay_val_ref, - ft->ref_freq, - freq->new); cpu_data(cpu).clock_tick = cpufreq_scale(ft->clock_tick_ref, ft->ref_freq, diff --git a/arch/sparc64/lib/delay.c b/arch/sparc64/lib/delay.c index e8808727617..fb27e54a03e 100644 --- a/arch/sparc64/lib/delay.c +++ b/arch/sparc64/lib/delay.c @@ -1,6 +1,6 @@ /* delay.c: Delay loops for sparc64 * - * Copyright (C) 2004 David S. Miller + * Copyright (C) 2004, 2006 David S. Miller * * Based heavily upon x86 variant which is: * Copyright (C) 1993 Linus Torvalds @@ -8,19 +8,16 @@ */ #include +#include void __delay(unsigned long loops) { - __asm__ __volatile__( -" b,pt %%xcc, 1f\n" -" cmp %0, 0\n" -" .align 32\n" -"1:\n" -" bne,pt %%xcc, 1b\n" -" subcc %0, 1, %0\n" - : "=&r" (loops) - : "0" (loops) - : "cc"); + unsigned long bclock, now; + + bclock = tick_ops->get_tick(); + do { + now = tick_ops->get_tick(); + } while ((now-bclock) < loops); } /* We used to multiply by HZ after shifting down by 32 bits -- cgit v1.2.3-18-g5258 From 52845cdb3b9c4c5fe1c2e295bd14457ff8dd6bcc Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 26 Feb 2006 23:32:33 -0800 Subject: [SPARC64]: Init boot cpu's trap_block[] before paging_init() It must be ready when we take over the trap table. Signed-off-by: David S. Miller --- arch/sparc64/kernel/setup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index 77066f1bbe2..0c68a76143a 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -379,10 +379,10 @@ void __init setup_arch(char **cmdline_p) smp_setup_cpu_possible_map(); - paging_init(); - /* Get boot processor trap_block[] setup. */ init_cur_cpu_trap(current_thread_info()); + + paging_init(); } static int __init set_preferred_console(void) -- cgit v1.2.3-18-g5258 From 12e126ad229abc718d05600027fcd5794c1e31e5 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 17 Feb 2006 14:40:30 -0800 Subject: [SPARC64]: Check for errors in hypervisor_tlb_lock(). Signed-off-by: David S. Miller --- arch/sparc64/mm/init.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 950d58082e2..bd9e3205674 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -510,6 +510,11 @@ static void __init hypervisor_tlb_lock(unsigned long vaddr, "=&r" (arg3) : "0" (func), "1" (arg0), "2" (arg1), "3" (arg2), "4" (arg3)); + if (arg0 != 0) { + prom_printf("hypervisor_tlb_lock[%lx:%lx:%lx:%lx]: " + "errors with %lx\n", vaddr, 0, pte, mmu, arg0); + prom_halt(); + } } static unsigned long kern_large_tte(unsigned long paddr); -- cgit v1.2.3-18-g5258 From 6c8927c9634e8a1bc95d5291c55205707f9fa40a Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 17 Feb 2006 14:58:02 -0800 Subject: [SPARC64]: Fix some SUN4V TLB handling bugs. 1) Add error return checking for TLB load hypervisor calls. 2) Don't fallthru to dtlb tsb miss handler from itlb tsb miss handler, oops. 3) On window fixups, propagate fault information to fixup handler correctly. Signed-off-by: David S. Miller --- arch/sparc64/kernel/sun4v_tlb_miss.S | 57 ++++++++++++++++++++++++++++++++++-- arch/sparc64/kernel/traps.c | 34 +++++++++++++++++++++ arch/sparc64/kernel/tsb.S | 6 ++-- 3 files changed, 92 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/sun4v_tlb_miss.S b/arch/sparc64/kernel/sun4v_tlb_miss.S index df65d712dcc..244d50de849 100644 --- a/arch/sparc64/kernel/sun4v_tlb_miss.S +++ b/arch/sparc64/kernel/sun4v_tlb_miss.S @@ -84,8 +84,9 @@ sun4v_itlb_load: mov %g3, %o2 ! PTE mov HV_MMU_IMMU, %o3 ! flags ta HV_MMU_MAP_ADDR_TRAP + brnz,pn %o0, sun4v_itlb_error + mov %g2, %o1 ! restore %o1 mov %g1, %o0 ! restore %o0 - mov %g2, %o1 ! restore %o1 mov %g5, %o2 ! restore %o2 mov %g7, %o3 ! restore %o3 @@ -126,8 +127,9 @@ sun4v_dtlb_load: mov %g3, %o2 ! PTE mov HV_MMU_DMMU, %o3 ! flags ta HV_MMU_MAP_ADDR_TRAP + brnz,pn %o0, sun4v_dtlb_error + mov %g2, %o1 ! restore %o1 mov %g1, %o0 ! restore %o0 - mov %g2, %o1 ! restore %o1 mov %g5, %o2 ! restore %o2 mov %g7, %o3 ! restore %o3 @@ -154,6 +156,7 @@ sun4v_itsb_miss: ldxa [%g1] ASI_SCRATCHPAD, %g1 brz,pn %g5, kvmap_itlb_4v mov FAULT_CODE_ITLB, %g3 + ba,a,pt %xcc, sun4v_tsb_miss_common /* Called from trap table with TAG TARGET placed into * %g6 and SCRATCHPAD_UTSBREG1 contents in %g1. @@ -182,6 +185,56 @@ sun4v_tsb_miss_common: ba,pt %xcc, tsb_miss_page_table_walk_sun4v_fastpath ldx [%g2 + TRAP_PER_CPU_PGD_PADDR], %g7 +sun4v_itlb_error: + sethi %hi(sun4v_err_itlb_vaddr), %g1 + stx %g4, [%g1 + %lo(sun4v_err_itlb_vaddr)] + sethi %hi(sun4v_err_itlb_ctx), %g1 + srlx %g6, 48, %o1 ! ctx + stx %o1, [%g1 + %lo(sun4v_err_itlb_ctx)] + sethi %hi(sun4v_err_itlb_pte), %g1 + stx %g3, [%g1 + %lo(sun4v_err_itlb_pte)] + sethi %hi(sun4v_err_itlb_error), %g1 + stx %o0, [%g1 + %lo(sun4v_err_itlb_error)] + + rdpr %tl, %g4 + cmp %g4, 1 + ble,pt %icc, 1f + sethi %hi(2f), %g7 + ba,pt %xcc, etraptl1 + or %g7, %lo(2f), %g7 + +1: ba,pt %xcc, etrap +2: or %g7, %lo(2b), %g7 + call sun4v_itlb_error_report + add %sp, PTREGS_OFF, %o0 + + /* NOTREACHED */ + +sun4v_dtlb_error: + sethi %hi(sun4v_err_dtlb_vaddr), %g1 + stx %g4, [%g1 + %lo(sun4v_err_dtlb_vaddr)] + sethi %hi(sun4v_err_dtlb_ctx), %g1 + srlx %g6, 48, %o1 ! ctx + stx %o1, [%g1 + %lo(sun4v_err_dtlb_ctx)] + sethi %hi(sun4v_err_dtlb_pte), %g1 + stx %g3, [%g1 + %lo(sun4v_err_dtlb_pte)] + sethi %hi(sun4v_err_dtlb_error), %g1 + stx %o0, [%g1 + %lo(sun4v_err_dtlb_error)] + + rdpr %tl, %g4 + cmp %g4, 1 + ble,pt %icc, 1f + sethi %hi(2f), %g7 + ba,pt %xcc, etraptl1 + or %g7, %lo(2f), %g7 + +1: ba,pt %xcc, etrap +2: or %g7, %lo(2b), %g7 + call sun4v_dtlb_error_report + add %sp, PTREGS_OFF, %o0 + + /* NOTREACHED */ + /* Instruction Access Exception, tl0. */ sun4v_iacc: ldxa [%g0] ASI_SCRATCHPAD, %g2 diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c index c9484ae5bb8..5a157e92bfc 100644 --- a/arch/sparc64/kernel/traps.c +++ b/arch/sparc64/kernel/traps.c @@ -1928,6 +1928,40 @@ void sun4v_nonresum_overflow(struct pt_regs *regs) atomic_inc(&sun4v_nonresum_oflow_cnt); } +unsigned long sun4v_err_itlb_vaddr; +unsigned long sun4v_err_itlb_ctx; +unsigned long sun4v_err_itlb_pte; +unsigned long sun4v_err_itlb_error; + +void sun4v_itlb_error_report(struct pt_regs *regs, int tl) +{ + if (tl > 1) + dump_tl1_traplog((struct tl1_traplog *)(regs + 1)); + + printk("SUN4V-ITLB: Error at TPC[%lx], tl %d\n", regs->tpc, tl); + printk("SUN4V-ITLB: vaddr[%lx] ctx[%lx] pte[%lx] error[%lx]\n", + sun4v_err_itlb_vaddr, sun4v_err_itlb_ctx, + sun4v_err_itlb_pte, sun4v_err_itlb_error); + prom_halt(); +} + +unsigned long sun4v_err_dtlb_vaddr; +unsigned long sun4v_err_dtlb_ctx; +unsigned long sun4v_err_dtlb_pte; +unsigned long sun4v_err_dtlb_error; + +void sun4v_dtlb_error_report(struct pt_regs *regs, int tl) +{ + if (tl > 1) + dump_tl1_traplog((struct tl1_traplog *)(regs + 1)); + + printk("SUN4V-DTLB: Error at TPC[%lx], tl %d\n", regs->tpc, tl); + printk("SUN4V-DTLB: vaddr[%lx] ctx[%lx] pte[%lx] error[%lx]\n", + sun4v_err_dtlb_vaddr, sun4v_err_dtlb_ctx, + sun4v_err_dtlb_pte, sun4v_err_dtlb_error); + prom_halt(); +} + void do_fpe_common(struct pt_regs *regs) { if (regs->tstate & TSTATE_PRIV) { diff --git a/arch/sparc64/kernel/tsb.S b/arch/sparc64/kernel/tsb.S index 7996c9d6670..a17259cf34b 100644 --- a/arch/sparc64/kernel/tsb.S +++ b/arch/sparc64/kernel/tsb.S @@ -135,8 +135,8 @@ tsb_do_fault: wrpr %g5, PSTATE_AG | PSTATE_MG, %pstate .section .sun4v_2insn_patch, "ax" .word 661b - nop - nop + SET_GL(1) + ldxa [%g0] ASI_SCRATCHPAD, %g2 .previous bne,pn %xcc, tsb_do_itlb_fault @@ -150,7 +150,7 @@ tsb_do_dtlb_fault: ldxa [%g4] ASI_DMMU, %g5 .section .sun4v_2insn_patch, "ax" .word 661b - mov %g4, %g5 + ldx [%g2 + HV_FAULT_D_ADDR_OFFSET], %g5 nop .previous -- cgit v1.2.3-18-g5258 From 7adb37fe80d06cbd40de9b225b12a3a9ec40b6bb Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 17 Feb 2006 15:07:43 -0800 Subject: [SPARC64]: Don't do anything in flush_ptrace_access() on SUN4V. Signed-off-by: David S. Miller --- arch/sparc64/kernel/ptrace.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/sparc64/kernel/ptrace.c b/arch/sparc64/kernel/ptrace.c index 3f9746f856d..eb93e9c5284 100644 --- a/arch/sparc64/kernel/ptrace.c +++ b/arch/sparc64/kernel/ptrace.c @@ -124,6 +124,9 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, { BUG_ON(len > PAGE_SIZE); + if (tlb_type == hypervisor) + return; + #ifdef DCACHE_ALIASING_POSSIBLE /* If bit 13 of the kernel address we used to access the * user page is the same as the virtual address that page -- cgit v1.2.3-18-g5258 From 8b234274418d6d79527c4ac3a72da446ca4cb35f Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 17 Feb 2006 18:01:02 -0800 Subject: [SPARC64]: More TLB/TSB handling fixes. The SUN4V convention with non-shared TSBs is that the context bit of the TAG is clear. So we have to choose an "invalid" bit and initialize new TSBs appropriately. Otherwise a zero TAG looks "valid". Make sure, for the window fixup cases, that we use the right global registers and that we don't potentially trample on the live global registers in etrap/rtrap handling (%g2 and %g6) and that we put the missing virtual address properly in %g5. Signed-off-by: David S. Miller --- arch/sparc64/kernel/dtlb_miss.S | 4 ++-- arch/sparc64/kernel/itlb_miss.S | 12 +++++------ arch/sparc64/kernel/ktlb.S | 14 ++++++++----- arch/sparc64/kernel/sun4v_tlb_miss.S | 39 +++++++++++++++++++----------------- arch/sparc64/kernel/tsb.S | 17 ++++++++++------ arch/sparc64/mm/init.c | 4 +++- arch/sparc64/mm/tsb.c | 25 +++++++++++------------ 7 files changed, 64 insertions(+), 51 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/dtlb_miss.S b/arch/sparc64/kernel/dtlb_miss.S index 2ef6f6e6e72..09a6a15a710 100644 --- a/arch/sparc64/kernel/dtlb_miss.S +++ b/arch/sparc64/kernel/dtlb_miss.S @@ -2,10 +2,10 @@ ldxa [%g0] ASI_DMMU_TSB_8KB_PTR, %g1 ! Get TSB 8K pointer ldxa [%g0] ASI_DMMU, %g6 ! Get TAG TARGET srlx %g6, 48, %g5 ! Get context + sllx %g6, 22, %g6 ! Zero out context brz,pn %g5, kvmap_dtlb ! Context 0 processing - nop ! Delay slot (fill me) + srlx %g6, 22, %g6 ! Delay slot TSB_LOAD_QUAD(%g1, %g4) ! Load TSB entry - nop ! Push branch to next I$ line cmp %g4, %g6 ! Compare TAG /* DTLB ** ICACHE line 2: TSB compare and TLB load */ diff --git a/arch/sparc64/kernel/itlb_miss.S b/arch/sparc64/kernel/itlb_miss.S index 730caa4a150..6dfe3968c37 100644 --- a/arch/sparc64/kernel/itlb_miss.S +++ b/arch/sparc64/kernel/itlb_miss.S @@ -2,25 +2,25 @@ ldxa [%g0] ASI_IMMU_TSB_8KB_PTR, %g1 ! Get TSB 8K pointer ldxa [%g0] ASI_IMMU, %g6 ! Get TAG TARGET srlx %g6, 48, %g5 ! Get context + sllx %g6, 22, %g6 ! Zero out context brz,pn %g5, kvmap_itlb ! Context 0 processing - nop ! Delay slot (fill me) + srlx %g6, 22, %g6 ! Delay slot TSB_LOAD_QUAD(%g1, %g4) ! Load TSB entry cmp %g4, %g6 ! Compare TAG - sethi %hi(PAGE_EXEC), %g4 ! Setup exec check /* ITLB ** ICACHE line 2: TSB compare and TLB load */ + sethi %hi(PAGE_EXEC), %g4 ! Setup exec check ldx [%g4 + %lo(PAGE_EXEC)], %g4 bne,pn %xcc, tsb_miss_itlb ! Miss mov FAULT_CODE_ITLB, %g3 andcc %g5, %g4, %g0 ! Executable? be,pn %xcc, tsb_do_fault nop ! Delay slot, fill me - stxa %g5, [%g0] ASI_ITLB_DATA_IN ! Load TLB - retry ! Trap done + nop /* ITLB ** ICACHE line 3: */ - nop - nop + stxa %g5, [%g0] ASI_ITLB_DATA_IN ! Load TLB + retry ! Trap done nop nop nop diff --git a/arch/sparc64/kernel/ktlb.S b/arch/sparc64/kernel/ktlb.S index 47dfd45971e..ac29da915d0 100644 --- a/arch/sparc64/kernel/ktlb.S +++ b/arch/sparc64/kernel/ktlb.S @@ -52,8 +52,10 @@ kvmap_itlb_vmalloc_addr: /* Load and check PTE. */ ldxa [%g5] ASI_PHYS_USE_EC, %g5 + mov 1, %g7 + sllx %g7, TSB_TAG_INVALID_BIT, %g7 brgez,a,pn %g5, kvmap_itlb_longpath - KTSB_STORE(%g1, %g0) + KTSB_STORE(%g1, %g7) KTSB_WRITE(%g1, %g5, %g6) @@ -146,8 +148,10 @@ kvmap_dtlb_vmalloc_addr: /* Load and check PTE. */ ldxa [%g5] ASI_PHYS_USE_EC, %g5 + mov 1, %g7 + sllx %g7, TSB_TAG_INVALID_BIT, %g7 brgez,a,pn %g5, kvmap_dtlb_longpath - KTSB_STORE(%g1, %g0) + KTSB_STORE(%g1, %g7) KTSB_WRITE(%g1, %g5, %g6) @@ -215,8 +219,8 @@ kvmap_dtlb_longpath: wrpr %g5, PSTATE_AG | PSTATE_MG, %pstate .section .sun4v_2insn_patch, "ax" .word 661b - nop - nop + SET_GL(1) + ldxa [%g0] ASI_SCRATCHPAD, %g5 .previous rdpr %tl, %g3 @@ -226,7 +230,7 @@ kvmap_dtlb_longpath: ldxa [%g4] ASI_DMMU, %g5 .section .sun4v_2insn_patch, "ax" .word 661b - mov %g4, %g5 + ldx [%g5 + HV_FAULT_D_ADDR_OFFSET], %g5 nop .previous diff --git a/arch/sparc64/kernel/sun4v_tlb_miss.S b/arch/sparc64/kernel/sun4v_tlb_miss.S index 244d50de849..57ccdaec7cc 100644 --- a/arch/sparc64/kernel/sun4v_tlb_miss.S +++ b/arch/sparc64/kernel/sun4v_tlb_miss.S @@ -16,15 +16,14 @@ ldx [BASE + HV_FAULT_D_ADDR_OFFSET], VADDR; \ ldx [BASE + HV_FAULT_D_CTX_OFFSET], CTX; - /* DEST = (CTX << 48) | (VADDR >> 22) + /* DEST = (VADDR >> 22) * * Branch to ZERO_CTX_LABEL is context is zero. */ -#define COMPUTE_TAG_TARGET(DEST, VADDR, CTX, TMP, ZERO_CTX_LABEL) \ - srlx VADDR, 22, TMP; \ - sllx CTX, 48, DEST; \ +#define COMPUTE_TAG_TARGET(DEST, VADDR, CTX, ZERO_CTX_LABEL) \ + srlx VADDR, 22, DEST; \ brz,pn CTX, ZERO_CTX_LABEL; \ - or DEST, TMP, DEST; + nop; /* Create TSB pointer. This is something like: * @@ -53,7 +52,7 @@ sun4v_itlb_miss: ldxa [%g1] ASI_SCRATCHPAD, %g1 LOAD_ITLB_INFO(%g2, %g4, %g5) - COMPUTE_TAG_TARGET(%g6, %g4, %g5, %g3, kvmap_itlb_4v) + COMPUTE_TAG_TARGET(%g6, %g4, %g5, kvmap_itlb_4v) COMPUTE_TSB_PTR(%g1, %g4, %g3, %g7) /* Load TSB tag/pte into %g2/%g3 and compare the tag. */ @@ -72,15 +71,15 @@ sun4v_itlb_miss: * * %g3: PTE * %g4: vaddr - * %g6: TAG TARGET (only "CTX << 48" part matters) */ sun4v_itlb_load: + ldxa [%g0] ASI_SCRATCHPAD, %g6 mov %o0, %g1 ! save %o0 mov %o1, %g2 ! save %o1 mov %o2, %g5 ! save %o2 mov %o3, %g7 ! save %o3 mov %g4, %o0 ! vaddr - srlx %g6, 48, %o1 ! ctx + ldx [%g6 + HV_FAULT_I_CTX_OFFSET], %o1 ! ctx mov %g3, %o2 ! PTE mov HV_MMU_IMMU, %o3 ! flags ta HV_MMU_MAP_ADDR_TRAP @@ -101,7 +100,7 @@ sun4v_dtlb_miss: ldxa [%g1] ASI_SCRATCHPAD, %g1 LOAD_DTLB_INFO(%g2, %g4, %g5) - COMPUTE_TAG_TARGET(%g6, %g4, %g5, %g3, kvmap_dtlb_4v) + COMPUTE_TAG_TARGET(%g6, %g4, %g5, kvmap_dtlb_4v) COMPUTE_TSB_PTR(%g1, %g4, %g3, %g7) /* Load TSB tag/pte into %g2/%g3 and compare the tag. */ @@ -115,15 +114,15 @@ sun4v_dtlb_miss: * * %g3: PTE * %g4: vaddr - * %g6: TAG TARGET (only "CTX << 48" part matters) */ sun4v_dtlb_load: + ldxa [%g0] ASI_SCRATCHPAD, %g6 mov %o0, %g1 ! save %o0 mov %o1, %g2 ! save %o1 mov %o2, %g5 ! save %o2 mov %o3, %g7 ! save %o3 mov %g4, %o0 ! vaddr - srlx %g6, 48, %o1 ! ctx + ldx [%g6 + HV_FAULT_D_CTX_OFFSET], %o1 ! ctx mov %g3, %o2 ! PTE mov HV_MMU_DMMU, %o3 ! flags ta HV_MMU_MAP_ADDR_TRAP @@ -136,16 +135,18 @@ sun4v_dtlb_load: retry sun4v_dtlb_prot: + SET_GL(1) + /* Load MMU Miss base into %g2. */ - ldxa [%g0] ASI_SCRATCHPAD, %g2 + ldxa [%g0] ASI_SCRATCHPAD, %g5 - ldx [%g2 + HV_FAULT_D_ADDR_OFFSET], %g5 + ldx [%g5 + HV_FAULT_D_ADDR_OFFSET], %g5 rdpr %tl, %g1 cmp %g1, 1 - bgu,pn %xcc, winfix_trampoline + bgu,pn %xcc, winfix_trampoline nop - ba,pt %xcc, sparc64_realfault_common - mov FAULT_CODE_DTLB | FAULT_CODE_WRITE, %g4 + ba,pt %xcc, sparc64_realfault_common + mov FAULT_CODE_DTLB | FAULT_CODE_WRITE, %g4 /* Called from trap table with TAG TARGET placed into * %g6, SCRATCHPAD_UTSBREG1 contents in %g1, and @@ -189,7 +190,8 @@ sun4v_itlb_error: sethi %hi(sun4v_err_itlb_vaddr), %g1 stx %g4, [%g1 + %lo(sun4v_err_itlb_vaddr)] sethi %hi(sun4v_err_itlb_ctx), %g1 - srlx %g6, 48, %o1 ! ctx + ldxa [%g0] ASI_SCRATCHPAD, %g6 + ldx [%g6 + HV_FAULT_I_CTX_OFFSET], %o1 stx %o1, [%g1 + %lo(sun4v_err_itlb_ctx)] sethi %hi(sun4v_err_itlb_pte), %g1 stx %g3, [%g1 + %lo(sun4v_err_itlb_pte)] @@ -214,7 +216,8 @@ sun4v_dtlb_error: sethi %hi(sun4v_err_dtlb_vaddr), %g1 stx %g4, [%g1 + %lo(sun4v_err_dtlb_vaddr)] sethi %hi(sun4v_err_dtlb_ctx), %g1 - srlx %g6, 48, %o1 ! ctx + ldxa [%g0] ASI_SCRATCHPAD, %g6 + ldx [%g6 + HV_FAULT_D_CTX_OFFSET], %o1 stx %o1, [%g1 + %lo(sun4v_err_dtlb_ctx)] sethi %hi(sun4v_err_dtlb_pte), %g1 stx %g3, [%g1 + %lo(sun4v_err_dtlb_pte)] diff --git a/arch/sparc64/kernel/tsb.S b/arch/sparc64/kernel/tsb.S index a17259cf34b..cc225c0563c 100644 --- a/arch/sparc64/kernel/tsb.S +++ b/arch/sparc64/kernel/tsb.S @@ -36,7 +36,7 @@ tsb_miss_itlb: /* At this point we have: * %g4 -- missing virtual address * %g1 -- TSB entry address - * %g6 -- TAG TARGET ((vaddr >> 22) | (ctx << 48)) + * %g6 -- TAG TARGET (vaddr >> 22) */ tsb_miss_page_table_walk: TRAP_LOAD_PGD_PHYS(%g7, %g5) @@ -50,8 +50,10 @@ tsb_reload: /* Load and check PTE. */ ldxa [%g5] ASI_PHYS_USE_EC, %g5 + mov 1, %g7 + sllx %g7, TSB_TAG_INVALID_BIT, %g7 brgez,a,pn %g5, tsb_do_fault - TSB_STORE(%g1, %g0) + TSB_STORE(%g1, %g7) /* If it is larger than the base page size, don't * bother putting it into the TSB. @@ -62,8 +64,10 @@ tsb_reload: sethi %hi(_PAGE_SZBITS), %g7 ldx [%g7 + %lo(_PAGE_SZBITS)], %g7 cmp %g2, %g7 + mov 1, %g7 + sllx %g7, TSB_TAG_INVALID_BIT, %g7 bne,a,pn %xcc, tsb_tlb_reload - TSB_STORE(%g1, %g0) + TSB_STORE(%g1, %g7) TSB_WRITE(%g1, %g5, %g6) @@ -136,7 +140,7 @@ tsb_do_fault: .section .sun4v_2insn_patch, "ax" .word 661b SET_GL(1) - ldxa [%g0] ASI_SCRATCHPAD, %g2 + ldxa [%g0] ASI_SCRATCHPAD, %g4 .previous bne,pn %xcc, tsb_do_itlb_fault @@ -150,7 +154,7 @@ tsb_do_dtlb_fault: ldxa [%g4] ASI_DMMU, %g5 .section .sun4v_2insn_patch, "ax" .word 661b - ldx [%g2 + HV_FAULT_D_ADDR_OFFSET], %g5 + ldx [%g4 + HV_FAULT_D_ADDR_OFFSET], %g5 nop .previous @@ -217,8 +221,9 @@ tsb_flush: bne,pn %icc, 1b membar #LoadLoad cmp %g1, %o1 + mov 1, %o3 bne,pt %xcc, 2f - clr %o3 + sllx %o3, TSB_TAG_INVALID_BIT, %o3 TSB_CAS_TAG(%o0, %g1, %o3) cmp %g1, %o3 bne,pn %xcc, 1b diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index bd9e3205674..aa2aec6373c 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -296,7 +296,7 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t p tsb = &mm->context.tsb[(address >> PAGE_SHIFT) & (mm->context.tsb_nentries - 1UL)]; - tag = (address >> 22UL) | CTX_HWBITS(mm->context) << 48UL; + tag = (address >> 22UL); tsb_insert(tsb, tag, pte_val(pte)); } } @@ -1110,6 +1110,8 @@ void __init paging_init(void) kern_base = (prom_boot_mapping_phys_low >> 22UL) << 22UL; kern_size = (unsigned long)&_end - (unsigned long)KERNBASE; + memset(swapper_tsb, 0x40, sizeof(swapper_tsb)); + if (tlb_type == hypervisor) sun4v_pgprot_init(); else diff --git a/arch/sparc64/mm/tsb.c b/arch/sparc64/mm/tsb.c index 3c1ff05038b..353cb060561 100644 --- a/arch/sparc64/mm/tsb.c +++ b/arch/sparc64/mm/tsb.c @@ -20,9 +20,9 @@ static inline unsigned long tsb_hash(unsigned long vaddr, unsigned long nentries return vaddr & (nentries - 1); } -static inline int tag_compare(unsigned long tag, unsigned long vaddr, unsigned long context) +static inline int tag_compare(unsigned long tag, unsigned long vaddr) { - return (tag == ((vaddr >> 22) | (context << 48))); + return (tag == (vaddr >> 22)); } /* TSB flushes need only occur on the processor initiating the address @@ -38,8 +38,8 @@ void flush_tsb_kernel_range(unsigned long start, unsigned long end) unsigned long hash = tsb_hash(v, KERNEL_TSB_NENTRIES); struct tsb *ent = &swapper_tsb[hash]; - if (tag_compare(ent->tag, v, 0)) { - ent->tag = 0UL; + if (tag_compare(ent->tag, v)) { + ent->tag = (1UL << TSB_TAG_INVALID_BIT); membar_storeload_storestore(); } } @@ -50,14 +50,9 @@ void flush_tsb_user(struct mmu_gather *mp) struct mm_struct *mm = mp->mm; struct tsb *tsb = mm->context.tsb; unsigned long nentries = mm->context.tsb_nentries; - unsigned long ctx, base; + unsigned long base; int i; - if (unlikely(!CTX_VALID(mm->context))) - return; - - ctx = CTX_HWBITS(mm->context); - if (tlb_type == cheetah_plus || tlb_type == hypervisor) base = __pa(tsb); else @@ -71,7 +66,7 @@ void flush_tsb_user(struct mmu_gather *mp) hash = tsb_hash(v, nentries); ent = base + (hash * sizeof(struct tsb)); - tag = (v >> 22UL) | (ctx << 48UL); + tag = (v >> 22UL); tsb_flush(ent, tag); } @@ -243,7 +238,8 @@ static void copy_tsb(struct tsb *old_tsb, unsigned long old_size, "i" (ASI_NUCLEUS_QUAD_LDD)); } - if (!tag || (tag & (1UL << TSB_TAG_LOCK_BIT))) + if (tag & ((1UL << TSB_TAG_LOCK_BIT) | + (1UL << TSB_TAG_INVALID_BIT))) continue; /* We only put base page size PTEs into the TSB, @@ -315,10 +311,13 @@ void tsb_grow(struct mm_struct *mm, unsigned long rss, gfp_t gfp_flags) break; } - page = alloc_pages(gfp_flags | __GFP_ZERO, get_order(size)); + page = alloc_pages(gfp_flags, get_order(size)); if (unlikely(!page)) return; + /* Mark all tags as invalid. */ + memset(page_address(page), 0x40, size); + if (size == max_tsb_size) mm->context.tsb_rss_limit = ~0UL; else -- cgit v1.2.3-18-g5258 From 0f15952ac8641bde1045162ffd4a7b474cc318b0 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 18 Feb 2006 12:43:16 -0800 Subject: [SPARC64]: Export a PAGE_SHARED symbol. For drivers/media/*, noticed by Fabbione. Signed-off-by: David S. Miller --- arch/sparc64/mm/init.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index aa2aec6373c..c7aa4404edc 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -1353,6 +1353,10 @@ EXPORT_SYMBOL(PAGE_KERNEL); pgprot_t PAGE_KERNEL_LOCKED __read_mostly; pgprot_t PAGE_COPY __read_mostly; + +pgprot_t PAGE_SHARED __read_mostly; +EXPORT_SYMBOL(PAGE_SHARED); + pgprot_t PAGE_EXEC __read_mostly; unsigned long pg_iobits __read_mostly; @@ -1367,6 +1371,7 @@ static void prot_init_common(unsigned long page_none, unsigned long page_exec_bit) { PAGE_COPY = __pgprot(page_copy); + PAGE_SHARED = __pgprot(page_shared); protection_map[0x0] = __pgprot(page_none); protection_map[0x1] = __pgprot(page_readonly & ~page_exec_bit); -- cgit v1.2.3-18-g5258 From 6cc200db9500f53c6b884ea5d5bc7eabae7f5d5c Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 18 Feb 2006 16:36:39 -0800 Subject: [SPARC64]: Set %gl to 1 in kvmap_itlb_longpath on SUN4V. Just like kvmap_dtlb_longpath we have to force the global register level to one in order to mimick the PSTATE_MG --> PSTATE_AG trasition done on SUN4U. Signed-off-by: David S. Miller --- arch/sparc64/kernel/ktlb.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/ktlb.S b/arch/sparc64/kernel/ktlb.S index ac29da915d0..883180be3d5 100644 --- a/arch/sparc64/kernel/ktlb.S +++ b/arch/sparc64/kernel/ktlb.S @@ -92,7 +92,7 @@ kvmap_itlb_longpath: wrpr %g5, PSTATE_AG | PSTATE_MG, %pstate .section .sun4v_2insn_patch, "ax" .word 661b - nop + SET_GL(1) nop .previous -- cgit v1.2.3-18-g5258 From 24c523ecc667dfeb28ef969cfabc531709bfffb8 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 18 Feb 2006 16:39:39 -0800 Subject: [SPARC64]: Fix unaligned access winfxup handling on SUN4V. Another case where we have to force ourselves into global register level one. Also make sure the arguments passed to sun4v_do_mna() are correct. This area actually needs some more work, for example spill fixup is not necessarily going to do the right thing for this case. Signed-off-by: David S. Miller --- arch/sparc64/kernel/sun4v_tlb_miss.S | 42 +++++++++++++++++++++++++----------- arch/sparc64/kernel/winfixup.S | 9 ++++---- 2 files changed, 34 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/sun4v_tlb_miss.S b/arch/sparc64/kernel/sun4v_tlb_miss.S index 57ccdaec7cc..654244a3b04 100644 --- a/arch/sparc64/kernel/sun4v_tlb_miss.S +++ b/arch/sparc64/kernel/sun4v_tlb_miss.S @@ -137,7 +137,7 @@ sun4v_dtlb_load: sun4v_dtlb_prot: SET_GL(1) - /* Load MMU Miss base into %g2. */ + /* Load MMU Miss base into %g5. */ ldxa [%g0] ASI_SCRATCHPAD, %g5 ldx [%g5 + HV_FAULT_D_ADDR_OFFSET], %g5 @@ -148,9 +148,10 @@ sun4v_dtlb_prot: ba,pt %xcc, sparc64_realfault_common mov FAULT_CODE_DTLB | FAULT_CODE_WRITE, %g4 - /* Called from trap table with TAG TARGET placed into - * %g6, SCRATCHPAD_UTSBREG1 contents in %g1, and - * SCRATCHPAD_MMU_MISS contents in %g2. + /* Called from trap table: + * %g4: vaddr + * %g5: context + * %g6: TAG TARGET */ sun4v_itsb_miss: mov SCRATCHPAD_UTSBREG1, %g1 @@ -159,8 +160,10 @@ sun4v_itsb_miss: mov FAULT_CODE_ITLB, %g3 ba,a,pt %xcc, sun4v_tsb_miss_common - /* Called from trap table with TAG TARGET placed into - * %g6 and SCRATCHPAD_UTSBREG1 contents in %g1. + /* Called from trap table: + * %g4: vaddr + * %g5: context + * %g6: TAG TARGET */ sun4v_dtsb_miss: mov SCRATCHPAD_UTSBREG1, %g1 @@ -168,6 +171,8 @@ sun4v_dtsb_miss: brz,pn %g5, kvmap_dtlb_4v mov FAULT_CODE_DTLB, %g3 + /* fallthrough */ + /* Create TSB pointer into %g1. This is something like: * * index_mask = (512 << (tsb_reg & 0x7UL)) - 1UL; @@ -304,19 +309,30 @@ sun4v_dacc_tl1: /* Memory Address Unaligned. */ sun4v_mna: - ldxa [%g0] ASI_SCRATCHPAD, %g2 + /* Window fixup? */ + rdpr %tl, %g2 + cmp %g2, 1 + ble,pt %icc, 1f + nop + + SET_GL(1) + ldxa [%g0] ASI_SCRATCHPAD, %g5 + ldx [%g5 + HV_FAULT_D_ADDR_OFFSET], %g5 + mov HV_FAULT_TYPE_UNALIGNED, %g3 + ldx [%g5 + HV_FAULT_D_CTX_OFFSET], %g4 + sllx %g3, 16, %g3 + or %g4, %g3, %g4 + ba,pt %xcc, winfix_mna + rdpr %tpc, %g3 + /* not reached */ + +1: ldxa [%g0] ASI_SCRATCHPAD, %g2 mov HV_FAULT_TYPE_UNALIGNED, %g3 ldx [%g2 + HV_FAULT_D_ADDR_OFFSET], %g4 ldx [%g2 + HV_FAULT_D_CTX_OFFSET], %g5 sllx %g3, 16, %g3 or %g5, %g3, %g5 - /* Window fixup? */ - rdpr %tl, %g2 - cmp %g2, 1 - bgu,pn %icc, winfix_mna - rdpr %tpc, %g3 - ba,pt %xcc, etrap rd %pc, %g7 mov %l4, %o1 diff --git a/arch/sparc64/kernel/winfixup.S b/arch/sparc64/kernel/winfixup.S index 161371370e9..c4aa110a10e 100644 --- a/arch/sparc64/kernel/winfixup.S +++ b/arch/sparc64/kernel/winfixup.S @@ -115,16 +115,17 @@ fill_fixup_mna: ba,pt %xcc, etrap rd %pc, %g7 sethi %hi(tlb_type), %g1 - mov %l4, %o1 lduw [%g1 + %lo(tlb_type)], %g1 - mov %l5, %o2 cmp %g1, 3 bne,pt %icc, 1f add %sp, PTREGS_OFF, %o0 + mov %l4, %o2 call sun4v_do_mna - nop + mov %l5, %o1 ba,a,pt %xcc, rtrap_clr_l6 -1: call mem_address_unaligned +1: mov %l4, %o1 + mov %l5, %o2 + call mem_address_unaligned nop ba,a,pt %xcc, rtrap_clr_l6 -- cgit v1.2.3-18-g5258 From 04d74758eb7dce6dfb7d2101315827c267ffefc4 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 18 Feb 2006 17:06:28 -0800 Subject: [SPARC64]: Use KERN_EMERG in dump_tl1_traplog() and sun4v TLB errors. We're about to seriously die in these cases so it is important that the messages make it to the console. Signed-off-by: David S. Miller --- arch/sparc64/kernel/traps.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c index 5a157e92bfc..6d45867ee16 100644 --- a/arch/sparc64/kernel/traps.c +++ b/arch/sparc64/kernel/traps.c @@ -75,12 +75,12 @@ static void dump_tl1_traplog(struct tl1_traplog *p) { int i, limit; - printk("TRAPLOG: Error at trap level 0x%lx, dumping track stack.\n", - p->tl); + printk(KERN_EMERG "TRAPLOG: Error at trap level 0x%lx, " + "dumping track stack.\n", p->tl); limit = (tlb_type == hypervisor) ? 2 : 4; for (i = 0; i < 4; i++) { - printk(KERN_CRIT + printk(KERN_EMERG "TRAPLOG: Trap level %d TSTATE[%016lx] TPC[%016lx] " "TNPC[%016lx] TT[%lx]\n", i + 1, @@ -1938,10 +1938,13 @@ void sun4v_itlb_error_report(struct pt_regs *regs, int tl) if (tl > 1) dump_tl1_traplog((struct tl1_traplog *)(regs + 1)); - printk("SUN4V-ITLB: Error at TPC[%lx], tl %d\n", regs->tpc, tl); - printk("SUN4V-ITLB: vaddr[%lx] ctx[%lx] pte[%lx] error[%lx]\n", + printk(KERN_EMERG "SUN4V-ITLB: Error at TPC[%lx], tl %d\n", + regs->tpc, tl); + printk(KERN_EMERG "SUN4V-ITLB: vaddr[%lx] ctx[%lx] " + "pte[%lx] error[%lx]\n", sun4v_err_itlb_vaddr, sun4v_err_itlb_ctx, sun4v_err_itlb_pte, sun4v_err_itlb_error); + prom_halt(); } @@ -1955,10 +1958,13 @@ void sun4v_dtlb_error_report(struct pt_regs *regs, int tl) if (tl > 1) dump_tl1_traplog((struct tl1_traplog *)(regs + 1)); - printk("SUN4V-DTLB: Error at TPC[%lx], tl %d\n", regs->tpc, tl); - printk("SUN4V-DTLB: vaddr[%lx] ctx[%lx] pte[%lx] error[%lx]\n", + printk(KERN_EMERG "SUN4V-DTLB: Error at TPC[%lx], tl %d\n", + regs->tpc, tl); + printk(KERN_EMERG "SUN4V-DTLB: vaddr[%lx] ctx[%lx] " + "pte[%lx] error[%lx]\n", sun4v_err_dtlb_vaddr, sun4v_err_dtlb_ctx, sun4v_err_dtlb_pte, sun4v_err_dtlb_error); + prom_halt(); } -- cgit v1.2.3-18-g5258 From 6a32fd4d0d42258004631dc0ac90665382a2e5dc Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 19 Feb 2006 22:21:32 -0800 Subject: [SPARC64]: Remove PGLIST_NENTS PCI IOMMU mapping limitation on SUN4V. Use a batching queue system for IOMMU mapping setup, with a page sized batch. Signed-off-by: David S. Miller --- arch/sparc64/kernel/pci_sun4v.c | 233 ++++++++++++++++++++++++------------ arch/sparc64/kernel/pci_sun4v.h | 10 +- arch/sparc64/kernel/pci_sun4v_asm.S | 11 +- 3 files changed, 171 insertions(+), 83 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c index 902d07c714f..4e9d3c451af 100644 --- a/arch/sparc64/kernel/pci_sun4v.c +++ b/arch/sparc64/kernel/pci_sun4v.c @@ -26,11 +26,86 @@ #define PGLIST_NENTS (PAGE_SIZE / sizeof(u64)) -struct sun4v_pglist { - u64 *pglist; +struct pci_iommu_batch { + struct pci_dev *pdev; /* Device mapping is for. */ + unsigned long prot; /* IOMMU page protections */ + unsigned long entry; /* Index into IOTSB. */ + u64 *pglist; /* List of physical pages */ + unsigned long npages; /* Number of pages in list. */ }; -static DEFINE_PER_CPU(struct sun4v_pglist, iommu_pglists); +static DEFINE_PER_CPU(struct pci_iommu_batch, pci_iommu_batch); + +/* Interrupts must be disabled. */ +static inline void pci_iommu_batch_start(struct pci_dev *pdev, unsigned long prot, unsigned long entry) +{ + struct pci_iommu_batch *p = &__get_cpu_var(pci_iommu_batch); + + p->pdev = pdev; + p->prot = prot; + p->entry = entry; + p->npages = 0; +} + +/* Interrupts must be disabled. */ +static long pci_iommu_batch_flush(struct pci_iommu_batch *p) +{ + struct pcidev_cookie *pcp = p->pdev->sysdata; + unsigned long devhandle = pcp->pbm->devhandle; + unsigned long prot = p->prot; + unsigned long entry = p->entry; + u64 *pglist = p->pglist; + unsigned long npages = p->npages; + + do { + long num; + + num = pci_sun4v_iommu_map(devhandle, HV_PCI_TSBID(0, entry), + npages, prot, __pa(pglist)); + if (unlikely(num < 0)) { + if (printk_ratelimit()) + printk("pci_iommu_batch_flush: IOMMU map of " + "[%08lx:%08lx:%lx:%lx:%lx] failed with " + "status %ld\n", + devhandle, HV_PCI_TSBID(0, entry), + npages, prot, __pa(pglist), num); + return -1; + } + + entry += num; + npages -= num; + pglist += num; + } while (npages != 0); + + p->entry = entry; + p->npages = 0; + + return 0; +} + +/* Interrupts must be disabled. */ +static inline long pci_iommu_batch_add(u64 phys_page) +{ + struct pci_iommu_batch *p = &__get_cpu_var(pci_iommu_batch); + + BUG_ON(p->npages >= PGLIST_NENTS); + + p->pglist[p->npages++] = phys_page; + if (p->npages == PGLIST_NENTS) + return pci_iommu_batch_flush(p); + + return 0; +} + +/* Interrupts must be disabled. */ +static inline long pci_iommu_batch_end(void) +{ + struct pci_iommu_batch *p = &__get_cpu_var(pci_iommu_batch); + + BUG_ON(p->npages >= PGLIST_NENTS); + + return pci_iommu_batch_flush(p); +} static long pci_arena_alloc(struct pci_iommu_arena *arena, unsigned long npages) { @@ -86,65 +161,64 @@ static void *pci_4v_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr unsigned long flags, order, first_page, npages, n; void *ret; long entry; - u64 *pglist; - u32 devhandle; - int cpu; size = IO_PAGE_ALIGN(size); order = get_order(size); - if (order >= MAX_ORDER) + if (unlikely(order >= MAX_ORDER)) return NULL; npages = size >> IO_PAGE_SHIFT; - if (npages > PGLIST_NENTS) - return NULL; first_page = __get_free_pages(GFP_ATOMIC, order); - if (first_page == 0UL) + if (unlikely(first_page == 0UL)) return NULL; memset((char *)first_page, 0, PAGE_SIZE << order); pcp = pdev->sysdata; - devhandle = pcp->pbm->devhandle; iommu = pcp->pbm->iommu; spin_lock_irqsave(&iommu->lock, flags); entry = pci_arena_alloc(&iommu->arena, npages); spin_unlock_irqrestore(&iommu->lock, flags); - if (unlikely(entry < 0L)) { - free_pages(first_page, order); - return NULL; - } + if (unlikely(entry < 0L)) + goto arena_alloc_fail; *dma_addrp = (iommu->page_table_map_base + (entry << IO_PAGE_SHIFT)); ret = (void *) first_page; first_page = __pa(first_page); - cpu = get_cpu(); + local_irq_save(flags); - pglist = __get_cpu_var(iommu_pglists).pglist; - for (n = 0; n < npages; n++) - pglist[n] = first_page + (n * PAGE_SIZE); + pci_iommu_batch_start(pdev, + (HV_PCI_MAP_ATTR_READ | + HV_PCI_MAP_ATTR_WRITE), + entry); - do { - unsigned long num; + for (n = 0; n < npages; n++) { + long err = pci_iommu_batch_add(first_page + (n * PAGE_SIZE)); + if (unlikely(err < 0L)) + goto iommu_map_fail; + } - num = pci_sun4v_iommu_map(devhandle, HV_PCI_TSBID(0, entry), - npages, - (HV_PCI_MAP_ATTR_READ | - HV_PCI_MAP_ATTR_WRITE), - __pa(pglist)); - entry += num; - npages -= num; - pglist += num; - } while (npages != 0); + if (unlikely(pci_iommu_batch_end() < 0L)) + goto iommu_map_fail; - put_cpu(); + local_irq_restore(flags); return ret; + +iommu_map_fail: + /* Interrupts are disabled. */ + spin_lock(&iommu->lock); + pci_arena_free(&iommu->arena, entry, npages); + spin_unlock_irqrestore(&iommu->lock, flags); + +arena_alloc_fail: + free_pages(first_page, order); + return NULL; } static void pci_4v_free_consistent(struct pci_dev *pdev, size_t size, void *cpu, dma_addr_t dvma) @@ -186,15 +260,12 @@ static dma_addr_t pci_4v_map_single(struct pci_dev *pdev, void *ptr, size_t sz, struct pci_iommu *iommu; unsigned long flags, npages, oaddr; unsigned long i, base_paddr; - u32 devhandle, bus_addr, ret; + u32 bus_addr, ret; unsigned long prot; long entry; - u64 *pglist; - int cpu; pcp = pdev->sysdata; iommu = pcp->pbm->iommu; - devhandle = pcp->pbm->devhandle; if (unlikely(direction == PCI_DMA_NONE)) goto bad; @@ -202,8 +273,6 @@ static dma_addr_t pci_4v_map_single(struct pci_dev *pdev, void *ptr, size_t sz, oaddr = (unsigned long)ptr; npages = IO_PAGE_ALIGN(oaddr + sz) - (oaddr & IO_PAGE_MASK); npages >>= IO_PAGE_SHIFT; - if (unlikely(npages > PGLIST_NENTS)) - goto bad; spin_lock_irqsave(&iommu->lock, flags); entry = pci_arena_alloc(&iommu->arena, npages); @@ -220,24 +289,19 @@ static dma_addr_t pci_4v_map_single(struct pci_dev *pdev, void *ptr, size_t sz, if (direction != PCI_DMA_TODEVICE) prot |= HV_PCI_MAP_ATTR_WRITE; - cpu = get_cpu(); - - pglist = __get_cpu_var(iommu_pglists).pglist; - for (i = 0; i < npages; i++, base_paddr += IO_PAGE_SIZE) - pglist[i] = base_paddr; + local_irq_save(flags); - do { - unsigned long num; + pci_iommu_batch_start(pdev, prot, entry); - num = pci_sun4v_iommu_map(devhandle, HV_PCI_TSBID(0, entry), - npages, prot, - __pa(pglist)); - entry += num; - npages -= num; - pglist += num; - } while (npages != 0); + for (i = 0; i < npages; i++, base_paddr += IO_PAGE_SIZE) { + long err = pci_iommu_batch_add(base_paddr); + if (unlikely(err < 0L)) + goto iommu_map_fail; + } + if (unlikely(pci_iommu_batch_end() < 0L)) + goto iommu_map_fail; - put_cpu(); + local_irq_restore(flags); return ret; @@ -245,6 +309,14 @@ bad: if (printk_ratelimit()) WARN_ON(1); return PCI_DMA_ERROR_CODE; + +iommu_map_fail: + /* Interrupts are disabled. */ + spin_lock(&iommu->lock); + pci_arena_free(&iommu->arena, entry, npages); + spin_unlock_irqrestore(&iommu->lock, flags); + + return PCI_DMA_ERROR_CODE; } static void pci_4v_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int direction) @@ -289,18 +361,19 @@ static void pci_4v_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_ #define SG_ENT_PHYS_ADDRESS(SG) \ (__pa(page_address((SG)->page)) + (SG)->offset) -static inline void fill_sg(long entry, u32 devhandle, +static inline long fill_sg(long entry, struct pci_dev *pdev, struct scatterlist *sg, int nused, int nelems, unsigned long prot) { struct scatterlist *dma_sg = sg; struct scatterlist *sg_end = sg + nelems; - int i, cpu, pglist_ent; - u64 *pglist; + unsigned long flags; + int i; + + local_irq_save(flags); + + pci_iommu_batch_start(pdev, prot, entry); - cpu = get_cpu(); - pglist = __get_cpu_var(iommu_pglists).pglist; - pglist_ent = 0; for (i = 0; i < nused; i++) { unsigned long pteval = ~0UL; u32 dma_npages; @@ -338,7 +411,12 @@ static inline void fill_sg(long entry, u32 devhandle, pteval = (pteval & IOPTE_PAGE); while (len > 0) { - pglist[pglist_ent++] = pteval; + long err; + + err = pci_iommu_batch_add(pteval); + if (unlikely(err < 0L)) + goto iommu_map_failed; + pteval += IO_PAGE_SIZE; len -= (IO_PAGE_SIZE - offset); offset = 0; @@ -366,18 +444,15 @@ static inline void fill_sg(long entry, u32 devhandle, dma_sg++; } - BUG_ON(pglist_ent == 0); + if (unlikely(pci_iommu_batch_end() < 0L)) + goto iommu_map_failed; - do { - unsigned long num; - - num = pci_sun4v_iommu_demap(devhandle, HV_PCI_TSBID(0, entry), - pglist_ent); - entry += num; - pglist_ent -= num; - } while (pglist_ent != 0); + local_irq_restore(flags); + return 0; - put_cpu(); +iommu_map_failed: + local_irq_restore(flags); + return -1L; } static int pci_4v_map_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, int direction) @@ -385,9 +460,9 @@ static int pci_4v_map_sg(struct pci_dev *pdev, struct scatterlist *sglist, int n struct pcidev_cookie *pcp; struct pci_iommu *iommu; unsigned long flags, npages, prot; - u32 devhandle, dma_base; + u32 dma_base; struct scatterlist *sgtmp; - long entry; + long entry, err; int used; /* Fast path single entry scatterlists. */ @@ -404,7 +479,6 @@ static int pci_4v_map_sg(struct pci_dev *pdev, struct scatterlist *sglist, int n pcp = pdev->sysdata; iommu = pcp->pbm->iommu; - devhandle = pcp->pbm->devhandle; if (unlikely(direction == PCI_DMA_NONE)) goto bad; @@ -441,7 +515,9 @@ static int pci_4v_map_sg(struct pci_dev *pdev, struct scatterlist *sglist, int n if (direction != PCI_DMA_TODEVICE) prot |= HV_PCI_MAP_ATTR_WRITE; - fill_sg(entry, devhandle, sglist, used, nelems, prot); + err = fill_sg(entry, pdev, sglist, used, nelems, prot); + if (unlikely(err < 0L)) + goto iommu_map_failed; return used; @@ -449,6 +525,13 @@ bad: if (printk_ratelimit()) WARN_ON(1); return 0; + +iommu_map_failed: + spin_lock_irqsave(&iommu->lock, flags); + pci_arena_free(&iommu->arena, entry, npages); + spin_unlock_irqrestore(&iommu->lock, flags); + + return 0; } static void pci_4v_unmap_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, int direction) @@ -1011,13 +1094,13 @@ void sun4v_pci_init(int node, char *model_name) } } - for (i = 0; i < NR_CPUS; i++) { + for_each_cpu(i) { unsigned long page = get_zeroed_page(GFP_ATOMIC); if (!page) goto fatal_memory_error; - per_cpu(iommu_pglists, i).pglist = (u64 *) page; + per_cpu(pci_iommu_batch, i).pglist = (u64 *) page; } p = kmalloc(sizeof(struct pci_controller_info), GFP_ATOMIC); diff --git a/arch/sparc64/kernel/pci_sun4v.h b/arch/sparc64/kernel/pci_sun4v.h index 88f199e11a7..884d25f6158 100644 --- a/arch/sparc64/kernel/pci_sun4v.h +++ b/arch/sparc64/kernel/pci_sun4v.h @@ -6,11 +6,11 @@ #ifndef _PCI_SUN4V_H #define _PCI_SUN4V_H -extern unsigned long pci_sun4v_iommu_map(unsigned long devhandle, - unsigned long tsbid, - unsigned long num_ttes, - unsigned long io_attributes, - unsigned long io_page_list_pa); +extern long pci_sun4v_iommu_map(unsigned long devhandle, + unsigned long tsbid, + unsigned long num_ttes, + unsigned long io_attributes, + unsigned long io_page_list_pa); extern unsigned long pci_sun4v_iommu_demap(unsigned long devhandle, unsigned long tsbid, unsigned long num_ttes); diff --git a/arch/sparc64/kernel/pci_sun4v_asm.S b/arch/sparc64/kernel/pci_sun4v_asm.S index 424db652664..6604fdbf746 100644 --- a/arch/sparc64/kernel/pci_sun4v_asm.S +++ b/arch/sparc64/kernel/pci_sun4v_asm.S @@ -11,14 +11,19 @@ * %o3: io_attributes * %o4: io_page_list phys address * - * returns %o0: num ttes mapped + * returns %o0: -status if status was non-zero, else + * %o0: num pages mapped */ .globl pci_sun4v_iommu_map pci_sun4v_iommu_map: + mov %o5, %g1 mov HV_FAST_PCI_IOMMU_MAP, %o5 ta HV_FAST_TRAP - retl - mov %o1, %o0 + brnz,pn %o0, 1f + sub %g0, %o0, %o0 + mov %o1, %o0 +1: retl + nop /* %o0: devhandle * %o1: tsbid -- cgit v1.2.3-18-g5258 From 37133c006cd3ff4f4dccb3df88efc446863b515e Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 20 Feb 2006 00:36:57 -0800 Subject: [SPARC64]: Disable smp_report_regs() for now. It's extremely noisy and causes much grief on slow consoles with large numbers of cpus. We'll have to provide this some saner way in order to re-enable this. Signed-off-by: David S. Miller --- arch/sparc64/kernel/traps.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c index 6d45867ee16..4eb2ee1125d 100644 --- a/arch/sparc64/kernel/traps.c +++ b/arch/sparc64/kernel/traps.c @@ -2226,10 +2226,11 @@ void die_if_kernel(char *str, struct pt_regs *regs) } user_instruction_dump ((unsigned int __user *) regs->tpc); } +#if 0 #ifdef CONFIG_SMP smp_report_regs(); #endif - +#endif if (regs->tstate & TSTATE_PRIV) do_exit(SIGKILL); do_exit(SIGSEGV); -- cgit v1.2.3-18-g5258 From 39334a4b2c52a06960c480b1a4a05f5d5375c8bf Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 20 Feb 2006 00:54:09 -0800 Subject: [SPARC64]: Fix typo in dump_tl1_traplog() Actually make use of the 'limit' we compute. Signed-off-by: David S. Miller --- arch/sparc64/kernel/traps.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c index 4eb2ee1125d..78268217b06 100644 --- a/arch/sparc64/kernel/traps.c +++ b/arch/sparc64/kernel/traps.c @@ -79,7 +79,7 @@ static void dump_tl1_traplog(struct tl1_traplog *p) "dumping track stack.\n", p->tl); limit = (tlb_type == hypervisor) ? 2 : 4; - for (i = 0; i < 4; i++) { + for (i = 0; i < limit; i++) { printk(KERN_EMERG "TRAPLOG: Trap level %d TSTATE[%016lx] TPC[%016lx] " "TNPC[%016lx] TT[%lx]\n", -- cgit v1.2.3-18-g5258 From abf3b7bd89c11492b145e338913c0b511084cff7 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 20 Feb 2006 01:09:01 -0800 Subject: [SPARC64]: Kill stray PGLIST_NENTS check in pci_sun4v.c I forgot to remove the one in pci_4v_map_sg() during the iommu batching commit. Signed-off-by: David S. Miller --- arch/sparc64/kernel/pci_sun4v.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c index 4e9d3c451af..d9ef0c7580e 100644 --- a/arch/sparc64/kernel/pci_sun4v.c +++ b/arch/sparc64/kernel/pci_sun4v.c @@ -485,8 +485,6 @@ static int pci_4v_map_sg(struct pci_dev *pdev, struct scatterlist *sglist, int n /* Step 1: Prepare scatter list. */ npages = prepare_sg(sglist, nelems); - if (unlikely(npages > PGLIST_NENTS)) - goto bad; /* Step 2: Allocate a cluster and context, if necessary. */ spin_lock_irqsave(&iommu->lock, flags); -- cgit v1.2.3-18-g5258 From d82965c16781a7c5b8508c3784ba10bbeef34ff4 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 20 Feb 2006 01:42:51 -0800 Subject: [SPARC64]: Handle zero-length map requests in pci_sun4v.c By simply changing the do-while loop into a plain while loop. Signed-off-by: David S. Miller --- arch/sparc64/kernel/pci_sun4v.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c index d9ef0c7580e..a9c44c0ae0a 100644 --- a/arch/sparc64/kernel/pci_sun4v.c +++ b/arch/sparc64/kernel/pci_sun4v.c @@ -57,7 +57,7 @@ static long pci_iommu_batch_flush(struct pci_iommu_batch *p) u64 *pglist = p->pglist; unsigned long npages = p->npages; - do { + while (npages != 0) { long num; num = pci_sun4v_iommu_map(devhandle, HV_PCI_TSBID(0, entry), @@ -75,7 +75,7 @@ static long pci_iommu_batch_flush(struct pci_iommu_batch *p) entry += num; npages -= num; pglist += num; - } while (npages != 0); + } p->entry = entry; p->npages = 0; -- cgit v1.2.3-18-g5258 From 55555633bd4e72534b53c50525817259435e18df Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 20 Feb 2006 01:50:09 -0800 Subject: [SPARC64]: Typo in sun4v_data_access_exception log message. Should be "Dax" not "Iax". Signed-off-by: David S. Miller --- arch/sparc64/kernel/traps.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c index 78268217b06..8df0cf29e3e 100644 --- a/arch/sparc64/kernel/traps.c +++ b/arch/sparc64/kernel/traps.c @@ -283,7 +283,7 @@ void sun4v_data_access_exception(struct pt_regs *regs, unsigned long addr, unsig printk("sun4v_data_access_exception: ADDR[%016lx] " "CTX[%04x] TYPE[%04x], going.\n", addr, ctx, type); - die_if_kernel("Iax", regs); + die_if_kernel("Dax", regs); } if (test_thread_flag(TIF_32BIT)) { -- cgit v1.2.3-18-g5258 From 4e74ae800bafe79d4aaa529bc5d52425757c0115 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 20 Feb 2006 16:02:24 -0800 Subject: [SPARC64]: Handle unimplemented FPU square-root on Niagara. The math-emu code only expects unfinished fpop traps when emulating FPU sqrt instructions on pre-Niagara chips. On Niagara we can get unimplemented fpop, so handle that. Signed-off-by: David S. Miller --- arch/sparc64/math-emu/math.c | 25 +++++++++++++++++++++++-- 1 file changed, 23 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/math-emu/math.c b/arch/sparc64/math-emu/math.c index 2ae05cd7b77..a93a3664c85 100644 --- a/arch/sparc64/math-emu/math.c +++ b/arch/sparc64/math-emu/math.c @@ -206,9 +206,30 @@ int do_mathemu(struct pt_regs *regs, struct fpustate *f) case FSTOQ: TYPE(3,3,1,1,1,0,0); break; case FDTOQ: TYPE(3,3,1,2,1,0,0); break; case FQTOI: TYPE(3,1,0,3,1,0,0); break; + + /* We can get either unimplemented or unfinished + * for these cases. Pre-Niagara systems generate + * unfinished fpop for SUBNORMAL cases, and Niagara + * always gives unimplemented fpop for fsqrt{s,d}. + */ + case FSQRTS: { + unsigned long x = current_thread_info()->xfsr[0]; + + x = (x >> 14) & 0xf; + TYPE(x,1,1,1,1,0,0); + printk("math-emu: type is %08x\n", type); + break; + } + + case FSQRTD: { + unsigned long x = current_thread_info()->xfsr[0]; + + x = (x >> 14) & 0xf; + TYPE(x,2,1,2,1,0,0); + break; + } + /* SUBNORMAL - ftt == 2 */ - case FSQRTS: TYPE(2,1,1,1,1,0,0); break; - case FSQRTD: TYPE(2,2,1,2,1,0,0); break; case FADDD: case FSUBD: case FMULD: -- cgit v1.2.3-18-g5258 From c79f76777d678ba454aa727800e1386a1fd1f2e8 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 20 Feb 2006 22:56:01 -0800 Subject: [SPARC64]: Args to SUNW,set-trap-table are 64-bit. They were getting truncated to 32-bit and this is very bad when your MMU fault status area is in physical memory above 4GB on SUN4V. Signed-off-by: David S. Miller --- arch/sparc64/prom/misc.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/prom/misc.c b/arch/sparc64/prom/misc.c index 36d2b9c1622..90df42141b1 100644 --- a/arch/sparc64/prom/misc.c +++ b/arch/sparc64/prom/misc.c @@ -133,12 +133,17 @@ int prom_getprev(void) /* Install Linux trap table so PROM uses that instead of its own. */ void prom_set_trap_table(unsigned long tba) { - p1275_cmd("SUNW,set-trap-table", P1275_INOUT(1, 0), tba); + p1275_cmd("SUNW,set-trap-table", + (P1275_ARG(0, P1275_ARG_IN_64B) | + P1275_INOUT(1, 0)), tba); } void prom_set_trap_table_sun4v(unsigned long tba, unsigned long mmfsa) { - p1275_cmd("SUNW,set-trap-table", P1275_INOUT(2, 0), tba, mmfsa); + p1275_cmd("SUNW,set-trap-table", + (P1275_ARG(0, P1275_ARG_IN_64B) | + P1275_ARG(1, P1275_ARG_IN_64B) | + P1275_INOUT(2, 0)), tba, mmfsa); } int prom_get_mmu_ihandle(void) -- cgit v1.2.3-18-g5258 From d371c0c17466b7e7bb4d395f96aa885a23df1073 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 21 Feb 2006 13:59:47 -0800 Subject: [SPARC64]: Pass multiple CPUs at once to hypervisor cross-call API. Signed-off-by: David S. Miller --- arch/sparc64/kernel/smp.c | 54 ----------------------------------------------- 1 file changed, 54 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index b586345fe3b..356d423ae14 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -557,7 +557,6 @@ retry: } } -#if 0 /* Multi-cpu list version. */ static int init_cpu_list(u16 *list, cpumask_t mask) { @@ -631,59 +630,6 @@ static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t put_cpu(); } -#else -/* Single-cpu list version. */ -static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mask) -{ - int this_cpu = get_cpu(); - struct trap_per_cpu *tb = &trap_block[this_cpu]; - u64 *mondo = __va(tb->cpu_mondo_block_pa); - u16 *cpu_list = __va(tb->cpu_list_pa); - int i; - - mondo[0] = data0; - mondo[1] = data1; - mondo[2] = data2; - wmb(); - - for_each_cpu_mask(i, mask) { - int retries = 0; - - do { - register unsigned long func __asm__("%o5"); - register unsigned long arg0 __asm__("%o0"); - register unsigned long arg1 __asm__("%o1"); - register unsigned long arg2 __asm__("%o2"); - - cpu_list[0] = i; - func = HV_FAST_CPU_MONDO_SEND; - arg0 = 1; - arg1 = tb->cpu_list_pa; - arg2 = tb->cpu_mondo_block_pa; - - __asm__ __volatile__("ta %8" - : "=&r" (func), "=&r" (arg0), - "=&r" (arg1), "=&r" (arg2) - : "0" (func), "1" (arg0), - "2" (arg1), "3" (arg2), - "i" (HV_FAST_TRAP) - : "memory"); - if (likely(arg0 == HV_EOK)) - break; - - if (unlikely(++retries > 100)) { - printk("CPU[%d]: sun4v mondo error %lu\n", - this_cpu, func); - break; - } - - udelay(2 * i); - } while (1); - } - - put_cpu(); -} -#endif /* Send cross call to all processors mentioned in MASK * except self. -- cgit v1.2.3-18-g5258 From 8ca2557c48000daa8183b07d83f582a597705ebe Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 21 Feb 2006 14:29:42 -0800 Subject: [SPARC64]: Niagara optimized memset/bzero/clear_user. Signed-off-by: David S. Miller --- arch/sparc64/kernel/head.S | 2 + arch/sparc64/lib/Makefile | 2 +- arch/sparc64/lib/NGbzero.S | 162 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 165 insertions(+), 1 deletion(-) create mode 100644 arch/sparc64/lib/NGbzero.S (limited to 'arch') diff --git a/arch/sparc64/kernel/head.S b/arch/sparc64/kernel/head.S index 3222c8205b5..8c6c4694be9 100644 --- a/arch/sparc64/kernel/head.S +++ b/arch/sparc64/kernel/head.S @@ -420,6 +420,8 @@ niagara_tlb_fixup: /* Patch copy/clear ops. */ call niagara_patch_copyops nop + call niagara_patch_bzero + nop call niagara_patch_pageops nop diff --git a/arch/sparc64/lib/Makefile b/arch/sparc64/lib/Makefile index 3d0e9a24d7a..8812ded19f0 100644 --- a/arch/sparc64/lib/Makefile +++ b/arch/sparc64/lib/Makefile @@ -12,7 +12,7 @@ lib-y := PeeCeeI.o copy_page.o clear_page.o strlen.o strncmp.o \ U1memcpy.o U1copy_from_user.o U1copy_to_user.o \ U3memcpy.o U3copy_from_user.o U3copy_to_user.o U3patch.o \ NGmemcpy.o NGcopy_from_user.o NGcopy_to_user.o NGpatch.o \ - NGpage.o \ + NGpage.o NGbzero.o \ copy_in_user.o user_fixup.o memmove.o \ mcount.o ipcsum.o rwsem.o xor.o find_bit.o delay.o diff --git a/arch/sparc64/lib/NGbzero.S b/arch/sparc64/lib/NGbzero.S new file mode 100644 index 00000000000..fef584f745d --- /dev/null +++ b/arch/sparc64/lib/NGbzero.S @@ -0,0 +1,162 @@ +/* NGbzero.S: Niagara optimized memset/clear_user. + * + * Copyright (C) 2006 David S. Miller (davem@davemloft.net) + */ +#include + +#define EX_ST(x,y) \ +98: x,y; \ + .section .fixup; \ + .align 4; \ +99: retl; \ + mov %o1, %o0; \ + .section __ex_table; \ + .align 4; \ + .word 98b, 99b; \ + .text; \ + .align 4; + + .text + + .globl NGmemset + .type NGmemset, #function +NGmemset: /* %o0=buf, %o1=pat, %o2=len */ + and %o1, 0xff, %o3 + mov %o2, %o1 + sllx %o3, 8, %g1 + or %g1, %o3, %o2 + sllx %o2, 16, %g1 + or %g1, %o2, %o2 + sllx %o2, 32, %g1 + ba,pt %xcc, 1f + or %g1, %o2, %o2 + + .globl NGbzero + .type NGbzero, #function +NGbzero: + clr %o2 +1: brz,pn %o1, NGbzero_return + mov %o0, %o3 + + /* %o5: saved %asi, restored at NGbzero_done + * %g7: store-init %asi to use + * %o4: non-store-init %asi to use + */ + rd %asi, %o5 + mov ASI_BLK_INIT_QUAD_LDD_P, %g7 + mov ASI_P, %o4 + wr %o4, 0x0, %asi + +NGbzero_from_clear_user: + cmp %o1, 15 + bl,pn %icc, NGbzero_tiny + andcc %o0, 0x7, %g1 + be,pt %xcc, 2f + mov 8, %g2 + sub %g2, %g1, %g1 + sub %o1, %g1, %o1 +1: EX_ST(stba %o2, [%o0 + 0x00] %asi) + subcc %g1, 1, %g1 + bne,pt %xcc, 1b + add %o0, 1, %o0 +2: cmp %o1, 128 + bl,pn %icc, NGbzero_medium + andcc %o0, (64 - 1), %g1 + be,pt %xcc, NGbzero_pre_loop + mov 64, %g2 + sub %g2, %g1, %g1 + sub %o1, %g1, %o1 +1: EX_ST(stxa %o2, [%o0 + 0x00] %asi) + subcc %g1, 8, %g1 + bne,pt %xcc, 1b + add %o0, 8, %o0 + +NGbzero_pre_loop: + wr %g7, 0x0, %asi + andn %o1, (64 - 1), %g1 + sub %o1, %g1, %o1 +NGbzero_loop: + EX_ST(stxa %o2, [%o0 + 0x00] %asi) + EX_ST(stxa %o2, [%o0 + 0x08] %asi) + EX_ST(stxa %o2, [%o0 + 0x10] %asi) + EX_ST(stxa %o2, [%o0 + 0x18] %asi) + EX_ST(stxa %o2, [%o0 + 0x20] %asi) + EX_ST(stxa %o2, [%o0 + 0x28] %asi) + EX_ST(stxa %o2, [%o0 + 0x30] %asi) + EX_ST(stxa %o2, [%o0 + 0x38] %asi) + subcc %g1, 64, %g1 + bne,pt %xcc, NGbzero_loop + add %o0, 64, %o0 + + wr %o4, 0x0, %asi + brz,pn %o1, NGbzero_done +NGbzero_medium: + andncc %o1, 0x7, %g1 + be,pn %xcc, 2f + sub %o1, %g1, %o1 +1: EX_ST(stxa %o2, [%o0 + 0x00] %asi) + subcc %g1, 8, %g1 + bne,pt %xcc, 1b + add %o0, 8, %o0 +2: brz,pt %o1, NGbzero_done + nop + +NGbzero_tiny: +1: EX_ST(stba %o2, [%o0 + 0x00] %asi) + subcc %o1, 1, %o1 + bne,pt %icc, 1b + add %o0, 1, %o0 + + /* fallthrough */ + +NGbzero_done: + wr %o5, 0x0, %asi + +NGbzero_return: + retl + mov %o3, %o0 + .size NGbzero, .-NGbzero + .size NGmemset, .-NGmemset + + .globl NGclear_user + .type NGclear_user, #function +NGclear_user: /* %o0=buf, %o1=len */ + rd %asi, %o5 + brz,pn %o1, NGbzero_done + clr %o3 + cmp %o5, ASI_AIUS + bne,pn %icc, NGbzero + clr %o2 + mov ASI_BLK_INIT_QUAD_LDD_AIUS, %g7 + ba,pt %xcc, NGbzero_from_clear_user + mov ASI_AIUS, %o4 + .size NGclear_user, .-NGclear_user + +#define BRANCH_ALWAYS 0x10680000 +#define NOP 0x01000000 +#define NG_DO_PATCH(OLD, NEW) \ + sethi %hi(NEW), %g1; \ + or %g1, %lo(NEW), %g1; \ + sethi %hi(OLD), %g2; \ + or %g2, %lo(OLD), %g2; \ + sub %g1, %g2, %g1; \ + sethi %hi(BRANCH_ALWAYS), %g3; \ + sll %g1, 11, %g1; \ + srl %g1, 11 + 2, %g1; \ + or %g3, %lo(BRANCH_ALWAYS), %g3; \ + or %g3, %g1, %g3; \ + stw %g3, [%g2]; \ + sethi %hi(NOP), %g3; \ + or %g3, %lo(NOP), %g3; \ + stw %g3, [%g2 + 0x4]; \ + flush %g2; + + .globl niagara_patch_bzero + .type niagara_patch_bzero,#function +niagara_patch_bzero: + NG_DO_PATCH(memset, NGmemset) + NG_DO_PATCH(__bzero, NGbzero) + NG_DO_PATCH(__clear_user, NGclear_user) + retl + nop + .size niagara_patch_bzero,.-niagara_patch_bzero -- cgit v1.2.3-18-g5258 From 1bd0cd74d102a527b2a72907698d73fad4b82cbd Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 21 Feb 2006 15:41:01 -0800 Subject: [SPARC64]: Kill cpudata->idle_volume. Set, but never used. We used to use this for dynamic IRQ retargetting, but that code died a long time ago. Signed-off-by: David S. Miller --- arch/sparc64/kernel/process.c | 10 ++-------- arch/sparc64/kernel/smp.c | 2 -- 2 files changed, 2 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c index d00cb7ad89b..1ab8283efc4 100644 --- a/arch/sparc64/kernel/process.c +++ b/arch/sparc64/kernel/process.c @@ -56,6 +56,8 @@ void default_idle(void) { } + + #ifndef CONFIG_SMP /* @@ -104,19 +106,11 @@ void cpu_idle(void) while(1) { if (need_resched()) { - cpuinfo->idle_volume = 0; preempt_enable_no_resched(); schedule(); preempt_disable(); check_pgt_cache(); } - cpuinfo->idle_volume++; - - /* The store ordering is so that IRQ handlers on - * other cpus see our increasing idleness for the buddy - * redistribution algorithm. -DaveM - */ - membar_storeload_storestore(); } } diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 356d423ae14..0cd9b16612e 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -88,8 +88,6 @@ void __init smp_store_cpu_info(int id) cpu_data(id).clock_tick = prom_getintdefault(cpu_node, "clock-frequency", 0); - cpu_data(id).idle_volume = 1; - def = ((tlb_type == hypervisor) ? (8 * 1024) : (16 * 1024)); cpu_data(id).dcache_size = prom_getintdefault(cpu_node, "dcache-size", def); -- cgit v1.2.3-18-g5258 From 6f5374c91f0dd1d92408ed44c066c32bcce5ce69 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 21 Feb 2006 15:42:09 -0800 Subject: [SPARC64]: Add sun4v_cpu_yield(). Signed-off-by: David S. Miller --- arch/sparc64/kernel/entry.S | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S index bd332e41532..9f3048e64e8 100644 --- a/arch/sparc64/kernel/entry.S +++ b/arch/sparc64/kernel/entry.S @@ -1786,3 +1786,12 @@ sun4v_cpu_qconf: ta HV_FAST_TRAP retl nop + + /* returns %o0: status + */ + .globl sun4v_cpu_yield +sun4v_cpu_yield: + mov HV_FAST_CPU_YIELD, %o5 + ta HV_FAST_TRAP + retl + nop -- cgit v1.2.3-18-g5258 From 689126a48a4cf7efc77d0d090b2db4e8927d7819 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 21 Feb 2006 16:53:26 -0800 Subject: [SPARC64] math-emu: Delete debugging printk left by previous commit. Signed-off-by: David S. Miller --- arch/sparc64/math-emu/math.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc64/math-emu/math.c b/arch/sparc64/math-emu/math.c index a93a3664c85..6ee496c2864 100644 --- a/arch/sparc64/math-emu/math.c +++ b/arch/sparc64/math-emu/math.c @@ -217,7 +217,6 @@ int do_mathemu(struct pt_regs *regs, struct fpustate *f) x = (x >> 14) & 0xf; TYPE(x,1,1,1,1,0,0); - printk("math-emu: type is %08x\n", type); break; } -- cgit v1.2.3-18-g5258 From 30c91d576e9ea41c963e7f28643219bda73b0ddc Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 21 Feb 2006 16:55:23 -0800 Subject: [SPARC64]: Use sun4v_cpu_idle() in cpu_idle() on SUN4V. We have to turn off the "polling nrflag" bit when we sleep the cpu like this, so that we'll get a cross-cpu interrupt to wake the processor up from the yield. We also have to disable PSTATE_IE in %pstate around the yield call and recheck need_resched() in order to avoid any races. Signed-off-by: David S. Miller --- arch/sparc64/kernel/process.c | 81 +++++++++++++++++-------------------------- 1 file changed, 32 insertions(+), 49 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c index 1ab8283efc4..1c7ca2f712d 100644 --- a/arch/sparc64/kernel/process.c +++ b/arch/sparc64/kernel/process.c @@ -46,62 +46,47 @@ #include #include #include +#include /* #define VERBOSE_SHOWREGS */ -/* - * Nothing special yet... - */ -void default_idle(void) -{ -} - - - -#ifndef CONFIG_SMP - -/* - * the idle loop on a Sparc... ;) - */ -void cpu_idle(void) +static void sparc64_yield(void) { - /* endless idle loop with no priority at all */ - for (;;) { - /* If current->work.need_resched is zero we should really - * setup for a system wakup event and execute a shutdown - * instruction. - * - * But this requires writing back the contents of the - * L2 cache etc. so implement this later. -DaveM - */ - while (!need_resched()) - barrier(); + if (tlb_type != hypervisor) + return; - preempt_enable_no_resched(); - schedule(); - preempt_disable(); - check_pgt_cache(); + clear_thread_flag(TIF_POLLING_NRFLAG); + smp_mb__after_clear_bit(); + + while (!need_resched()) { + unsigned long pstate; + + /* Disable interrupts. */ + __asm__ __volatile__( + "rdpr %%pstate, %0\n\t" + "andn %0, %1, %0\n\t" + "wrpr %0, %%g0, %%pstate" + : "=&r" (pstate) + : "i" (PSTATE_IE)); + + if (!need_resched()) + sun4v_cpu_yield(); + + /* Re-enable interrupts. */ + __asm__ __volatile__( + "rdpr %%pstate, %0\n\t" + "or %0, %1, %0\n\t" + "wrpr %0, %%g0, %%pstate" + : "=&r" (pstate) + : "i" (PSTATE_IE)); } -} -#else + set_thread_flag(TIF_POLLING_NRFLAG); +} -/* - * the idle loop on a UltraMultiPenguin... - * - * TIF_POLLING_NRFLAG is set because we do not sleep the cpu - * inside of the idler task, so an interrupt is not needed - * to get a clean fast response. - * - * XXX Reverify this assumption... -DaveM - * - * Addendum: We do want it to do something for the signal - * delivery case, we detect that by just seeing - * if we are trying to send this to an idler or not. - */ +/* The idle loop on sparc64. */ void cpu_idle(void) { - cpuinfo_sparc *cpuinfo = &local_cpu_data(); set_thread_flag(TIF_POLLING_NRFLAG); while(1) { @@ -109,13 +94,11 @@ void cpu_idle(void) preempt_enable_no_resched(); schedule(); preempt_disable(); - check_pgt_cache(); } + sparc64_yield(); } } -#endif - extern char reboot_command []; extern void (*prom_palette)(int); -- cgit v1.2.3-18-g5258 From 9cc3a1ac9a819cadff05ca37bb7f208013a22035 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 21 Feb 2006 20:51:13 -0800 Subject: [SPARC64]: Make use of Niagara 256MB PTEs for kernel mappings. We use a bitmap, one bit for every 256MB of memory. If the bit is set we can use a 256MB PTE for linear mappings, else we have to use a 4MB PTE. SUN4V support is there, and we can very easily add support for Panther cpu 256MB PTEs in the future. Signed-off-by: David S. Miller --- arch/sparc64/kernel/ktlb.S | 29 ++++++++++++++-- arch/sparc64/mm/init.c | 82 ++++++++++++++++++++++++++++++++++++++-------- 2 files changed, 96 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/ktlb.S b/arch/sparc64/kernel/ktlb.S index 883180be3d5..ae1dac17bc8 100644 --- a/arch/sparc64/kernel/ktlb.S +++ b/arch/sparc64/kernel/ktlb.S @@ -133,8 +133,33 @@ kvmap_dtlb_4v: brgez,pn %g4, kvmap_dtlb_nonlinear nop - sethi %hi(kern_linear_pte_xor), %g2 - ldx [%g2 + %lo(kern_linear_pte_xor)], %g2 + sethi %hi(kpte_linear_bitmap), %g2 + or %g2, %lo(kpte_linear_bitmap), %g2 + + /* Clear the PAGE_OFFSET top virtual bits, then shift + * down to get a 256MB physical address index. + */ + sllx %g4, 21, %g5 + mov 1, %g7 + srlx %g5, 21 + 28, %g5 + + /* Don't try this at home kids... this depends upon srlx + * only taking the low 6 bits of the shift count in %g5. + */ + sllx %g7, %g5, %g7 + + /* Divide by 64 to get the offset into the bitmask. */ + srlx %g5, 6, %g5 + + /* kern_linear_pte_xor[((mask & bit) ? 1 : 0)] */ + ldx [%g2 + %g5], %g2 + andcc %g2, %g7, %g0 + sethi %hi(kern_linear_pte_xor), %g5 + or %g5, %lo(kern_linear_pte_xor), %g5 + bne,a,pt %xcc, 1f + add %g5, 8, %g5 + +1: ldx [%g5], %g2 .globl kvmap_linear_patch kvmap_linear_patch: diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index c7aa4404edc..b5869f00d2d 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -45,6 +45,19 @@ extern void device_scan(void); +#define MAX_PHYS_ADDRESS (1UL << 42UL) +#define KPTE_BITMAP_CHUNK_SZ (256UL * 1024UL * 1024UL) +#define KPTE_BITMAP_BYTES \ + ((MAX_PHYS_ADDRESS / KPTE_BITMAP_CHUNK_SZ) / 8) + +unsigned long kern_linear_pte_xor[2] __read_mostly; + +/* A bitmap, one bit for every 256MB of physical memory. If the bit + * is clear, we should use a 4MB page (via kern_linear_pte_xor[0]) else + * if set we should use a 256MB page (via kern_linear_pte_xor[1]). + */ +unsigned long kpte_linear_bitmap[KPTE_BITMAP_BYTES / sizeof(unsigned long)]; + #define MAX_BANKS 32 static struct linux_prom64_registers pavail[MAX_BANKS] __initdata; @@ -119,7 +132,6 @@ unsigned long phys_base __read_mostly; unsigned long kern_base __read_mostly; unsigned long kern_size __read_mostly; unsigned long pfn_base __read_mostly; -unsigned long kern_linear_pte_xor __read_mostly; /* get_new_mmu_context() uses "cache + 1". */ DEFINE_SPINLOCK(ctx_alloc_lock); @@ -878,6 +890,9 @@ unsigned long __init bootmem_init(unsigned long *pages_avail) return end_pfn; } +static struct linux_prom64_registers pall[MAX_BANKS] __initdata; +static int pall_ents __initdata; + #ifdef CONFIG_DEBUG_PAGEALLOC static unsigned long kernel_map_range(unsigned long pstart, unsigned long pend, pgprot_t prot) { @@ -933,14 +948,41 @@ static unsigned long kernel_map_range(unsigned long pstart, unsigned long pend, return alloc_bytes; } -static struct linux_prom64_registers pall[MAX_BANKS] __initdata; -static int pall_ents __initdata; - extern unsigned int kvmap_linear_patch[1]; +#endif /* CONFIG_DEBUG_PAGEALLOC */ + +static void __init mark_kpte_bitmap(unsigned long start, unsigned long end) +{ + const unsigned long shift_256MB = 28; + const unsigned long mask_256MB = ((1UL << shift_256MB) - 1UL); + const unsigned long size_256MB = (1UL << shift_256MB); + + while (start < end) { + long remains; + + if (start & mask_256MB) { + start = (start + size_256MB) & ~mask_256MB; + continue; + } + + remains = end - start; + while (remains >= size_256MB) { + unsigned long index = start >> shift_256MB; + + __set_bit(index, kpte_linear_bitmap); + + start += size_256MB; + remains -= size_256MB; + } + } +} static void __init kernel_physical_mapping_init(void) { - unsigned long i, mem_alloced = 0UL; + unsigned long i; +#ifdef CONFIG_DEBUG_PAGEALLOC + unsigned long mem_alloced = 0UL; +#endif read_obp_memory("reg", &pall[0], &pall_ents); @@ -949,10 +991,16 @@ static void __init kernel_physical_mapping_init(void) phys_start = pall[i].phys_addr; phys_end = phys_start + pall[i].reg_size; + + mark_kpte_bitmap(phys_start, phys_end); + +#ifdef CONFIG_DEBUG_PAGEALLOC mem_alloced += kernel_map_range(phys_start, phys_end, PAGE_KERNEL); +#endif } +#ifdef CONFIG_DEBUG_PAGEALLOC printk("Allocated %ld bytes for kernel page tables.\n", mem_alloced); @@ -960,8 +1008,10 @@ static void __init kernel_physical_mapping_init(void) flushi(&kvmap_linear_patch[0]); __flush_tlb_all(); +#endif } +#ifdef CONFIG_DEBUG_PAGEALLOC void kernel_map_pages(struct page *page, int numpages, int enable) { unsigned long phys_start = page_to_pfn(page) << PAGE_SHIFT; @@ -1172,9 +1222,7 @@ void __init paging_init(void) pages_avail = 0; last_valid_pfn = end_pfn = bootmem_init(&pages_avail); -#ifdef CONFIG_DEBUG_PAGEALLOC kernel_physical_mapping_init(); -#endif { unsigned long zones_size[MAX_NR_ZONES]; @@ -1413,10 +1461,13 @@ static void __init sun4u_pgprot_init(void) pg_iobits = (_PAGE_VALID | _PAGE_PRESENT_4U | __DIRTY_BITS_4U | __ACCESS_BITS_4U | _PAGE_E_4U); - kern_linear_pte_xor = (_PAGE_VALID | _PAGE_SZ4MB_4U) ^ + kern_linear_pte_xor[0] = (_PAGE_VALID | _PAGE_SZ4MB_4U) ^ 0xfffff80000000000; - kern_linear_pte_xor |= (_PAGE_CP_4U | _PAGE_CV_4U | - _PAGE_P_4U | _PAGE_W_4U); + kern_linear_pte_xor[0] |= (_PAGE_CP_4U | _PAGE_CV_4U | + _PAGE_P_4U | _PAGE_W_4U); + + /* XXX Should use 256MB on Panther. XXX */ + kern_linear_pte_xor[1] = kern_linear_pte_xor[0]; _PAGE_SZBITS = _PAGE_SZBITS_4U; _PAGE_ALL_SZ_BITS = (_PAGE_SZ4MB_4U | _PAGE_SZ512K_4U | @@ -1454,10 +1505,15 @@ static void __init sun4v_pgprot_init(void) _PAGE_E = _PAGE_E_4V; _PAGE_CACHE = _PAGE_CACHE_4V; - kern_linear_pte_xor = (_PAGE_VALID | _PAGE_SZ4MB_4V) ^ + kern_linear_pte_xor[0] = (_PAGE_VALID | _PAGE_SZ4MB_4V) ^ + 0xfffff80000000000; + kern_linear_pte_xor[0] |= (_PAGE_CP_4V | _PAGE_CV_4V | + _PAGE_P_4V | _PAGE_W_4V); + + kern_linear_pte_xor[1] = (_PAGE_VALID | _PAGE_SZ256MB_4V) ^ 0xfffff80000000000; - kern_linear_pte_xor |= (_PAGE_CP_4V | _PAGE_CV_4V | - _PAGE_P_4V | _PAGE_W_4V); + kern_linear_pte_xor[1] |= (_PAGE_CP_4V | _PAGE_CV_4V | + _PAGE_P_4V | _PAGE_W_4V); pg_iobits = (_PAGE_VALID | _PAGE_PRESENT_4V | __DIRTY_BITS_4V | __ACCESS_BITS_4V | _PAGE_E_4V); -- cgit v1.2.3-18-g5258 From d7744a09504d5ae84edc8289a02254e1f2102410 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 21 Feb 2006 22:31:11 -0800 Subject: [SPARC64]: Create a seperate kernel TSB for 4MB/256MB mappings. It can map all of the linear kernel mappings with zero TSB hash conflicts for systems with 16GB or less ram. In such cases, on SUN4V, once we load up this TSB the first time with all the mappings, we never take a linear kernel mapping TLB miss ever again, the hypervisor handles them all. Signed-off-by: David S. Miller --- arch/sparc64/kernel/ktlb.S | 15 ++++++++++++++- arch/sparc64/mm/init.c | 24 +++++++++++++++++++----- 2 files changed, 33 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/ktlb.S b/arch/sparc64/kernel/ktlb.S index ae1dac17bc8..efcf38b6e28 100644 --- a/arch/sparc64/kernel/ktlb.S +++ b/arch/sparc64/kernel/ktlb.S @@ -121,6 +121,12 @@ kvmap_dtlb_obp: nop .align 32 +kvmap_dtlb_tsb4m_load: + KTSB_LOCK_TAG(%g1, %g2, %g7) + KTSB_WRITE(%g1, %g5, %g6) + ba,pt %xcc, kvmap_dtlb_load + nop + kvmap_dtlb: /* %g6: TAG TARGET */ mov TLB_TAG_ACCESS, %g4 @@ -133,6 +139,13 @@ kvmap_dtlb_4v: brgez,pn %g4, kvmap_dtlb_nonlinear nop + /* Correct TAG_TARGET is already in %g6, check 4mb TSB. */ + KERN_TSB4M_LOOKUP_TL1(%g6, %g5, %g1, %g2, %g3, kvmap_dtlb_load) + + /* TSB entry address left in %g1, lookup linear PTE. + * Must preserve %g1 and %g6 (TAG). + */ +kvmap_dtlb_tsb4m_miss: sethi %hi(kpte_linear_bitmap), %g2 or %g2, %lo(kpte_linear_bitmap), %g2 @@ -163,7 +176,7 @@ kvmap_dtlb_4v: .globl kvmap_linear_patch kvmap_linear_patch: - ba,pt %xcc, kvmap_dtlb_load + ba,pt %xcc, kvmap_dtlb_tsb4m_load xor %g2, %g4, %g5 kvmap_dtlb_vmalloc_addr: diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index b5869f00d2d..2a123135b04 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -58,6 +58,9 @@ unsigned long kern_linear_pte_xor[2] __read_mostly; */ unsigned long kpte_linear_bitmap[KPTE_BITMAP_BYTES / sizeof(unsigned long)]; +/* A special kernel TSB for 4MB and 256MB linear mappings. */ +struct tsb swapper_4m_tsb[KERNEL_TSB4M_NENTRIES]; + #define MAX_BANKS 32 static struct linux_prom64_registers pavail[MAX_BANKS] __initdata; @@ -1086,6 +1089,7 @@ static void __init sun4v_ktsb_init(void) { unsigned long ktsb_pa; + /* First KTSB for PAGE_SIZE mappings. */ ktsb_pa = kern_base + ((unsigned long)&swapper_tsb[0] - KERNBASE); switch (PAGE_SIZE) { @@ -1117,9 +1121,18 @@ static void __init sun4v_ktsb_init(void) ktsb_descr[0].tsb_base = ktsb_pa; ktsb_descr[0].resv = 0; - /* XXX When we have a kernel large page size TSB, describe - * XXX it in ktsb_descr[1] here. - */ + /* Second KTSB for 4MB/256MB mappings. */ + ktsb_pa = (kern_base + + ((unsigned long)&swapper_4m_tsb[0] - KERNBASE)); + + ktsb_descr[1].pgsz_idx = HV_PGSZ_IDX_4MB; + ktsb_descr[1].pgsz_mask = (HV_PGSZ_MASK_4MB | + HV_PGSZ_MASK_256MB); + ktsb_descr[1].assoc = 1; + ktsb_descr[1].num_ttes = KERNEL_TSB4M_NENTRIES; + ktsb_descr[1].ctx_idx = 0; + ktsb_descr[1].tsb_base = ktsb_pa; + ktsb_descr[1].resv = 0; } void __cpuinit sun4v_ktsb_register(void) @@ -1132,8 +1145,7 @@ void __cpuinit sun4v_ktsb_register(void) pa = kern_base + ((unsigned long)&ktsb_descr[0] - KERNBASE); func = HV_FAST_MMU_TSB_CTX0; - /* XXX set arg0 to 2 when we use ktsb_descr[1], see above XXX */ - arg0 = 1; + arg0 = 2; arg1 = pa; __asm__ __volatile__("ta %6" : "=&r" (func), "=&r" (arg0), "=&r" (arg1) @@ -1160,7 +1172,9 @@ void __init paging_init(void) kern_base = (prom_boot_mapping_phys_low >> 22UL) << 22UL; kern_size = (unsigned long)&_end - (unsigned long)KERNBASE; + /* Invalidate both kernel TSBs. */ memset(swapper_tsb, 0x40, sizeof(swapper_tsb)); + memset(swapper_4m_tsb, 0x40, sizeof(swapper_4m_tsb)); if (tlb_type == hypervisor) sun4v_pgprot_init(); -- cgit v1.2.3-18-g5258 From fc504928677049f0ad3f1fd4e0bb3908172df8f3 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 22 Feb 2006 16:15:45 -0800 Subject: [SPARC64]: Drop %gl to 0 before re-enabling PSTATE_IE in rtrap If we take a window fault, on SUN4V set %gl to zero before we turn PSTATE_IE back on in %pstate. Otherwise if we take an interrupt we'll end up with corrupt register state. Signed-off-by: David S. Miller --- arch/sparc64/kernel/rtrap.S | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/rtrap.S b/arch/sparc64/kernel/rtrap.S index 1e724fe172a..7130e866f93 100644 --- a/arch/sparc64/kernel/rtrap.S +++ b/arch/sparc64/kernel/rtrap.S @@ -333,7 +333,6 @@ user_rtt_fill_fixup: mov %g6, %l1 wrpr %g0, 0x0, %tl - wrpr %g0, RTRAP_PSTATE, %pstate 661: nop .section .sun4v_1insn_patch, "ax" @@ -341,6 +340,8 @@ user_rtt_fill_fixup: SET_GL(0) .previous + wrpr %g0, RTRAP_PSTATE, %pstate + mov %l1, %g6 ldx [%g6 + TI_TASK], %g4 LOAD_PER_CPU_BASE(%g5, %g6, %g1, %g2, %g3) -- cgit v1.2.3-18-g5258 From b2bef4424cb4522f53e34d98d3deb0916478338b Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 23 Feb 2006 01:55:55 -0800 Subject: [SPARC64]: Export _PAGE_E and _PAGE_CACHE to modules. SBUS flash driver needs it. Noticed by Fabbione. Signed-off-by: David S. Miller --- arch/sparc64/mm/init.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 2a123135b04..16f0db38d93 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -1423,8 +1423,12 @@ pgprot_t PAGE_EXEC __read_mostly; unsigned long pg_iobits __read_mostly; unsigned long _PAGE_IE __read_mostly; + unsigned long _PAGE_E __read_mostly; +EXPORT_SYMBOL(_PAGE_E); + unsigned long _PAGE_CACHE __read_mostly; +EXPORT_SYMBOL(_PAGE_CACHE); static void prot_init_common(unsigned long page_none, unsigned long page_shared, -- cgit v1.2.3-18-g5258 From 074d82cf688fe2dfa7ba4a2317c56f62d13fb522 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 23 Feb 2006 02:28:25 -0800 Subject: [SPARC64]: Put syscall tables after trap table. Otherwise with too much stuff enabled in the kernel config we can end up with an unaligned trap table. Signed-off-by: David S. Miller --- arch/sparc64/kernel/head.S | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/head.S b/arch/sparc64/kernel/head.S index 8c6c4694be9..3eadac5e171 100644 --- a/arch/sparc64/kernel/head.S +++ b/arch/sparc64/kernel/head.S @@ -622,7 +622,6 @@ setup_tba: restore sparc64_boot_end: -#include "systbls.S" #include "ktlb.S" #include "tsb.S" #include "etrap.S" @@ -650,6 +649,8 @@ swapper_tsb: #include "ttable.S" +#include "systbls.S" + .data .align 8 .globl prom_tba, tlb_type -- cgit v1.2.3-18-g5258 From a0663a79ad4faebe1db4a56e2e767b120b12333a Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 23 Feb 2006 14:19:28 -0800 Subject: [SPARC64]: Fix TLB context allocation with SMT style shared TLBs. The context allocation scheme we use depends upon there being a 1<-->1 mapping from cpu to physical TLB for correctness. Chips like Niagara break this assumption. So what we do is notify all cpus with a cross call when the context version number changes, and if necessary this makes them allocate a valid context for the address space they are running at the time. Stress tested with make -j1024, make -j2048, and make -j4096 kernel builds on a 32-strand, 8 core, T2000 with 16GB of ram. Signed-off-by: David S. Miller --- arch/sparc64/kernel/smp.c | 40 +++++++++++++++++++++++++++++----------- arch/sparc64/mm/init.c | 9 ++++++++- 2 files changed, 37 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 0cd9b16612e..1ce94081149 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -885,26 +885,44 @@ void flush_dcache_page_all(struct mm_struct *mm, struct page *page) put_cpu(); } +static void __smp_receive_signal_mask(cpumask_t mask) +{ + smp_cross_call_masked(&xcall_receive_signal, 0, 0, 0, mask); +} + void smp_receive_signal(int cpu) { cpumask_t mask = cpumask_of_cpu(cpu); - if (cpu_online(cpu)) { - u64 data0 = (((u64)&xcall_receive_signal) & 0xffffffff); - - if (tlb_type == spitfire) - spitfire_xcall_deliver(data0, 0, 0, mask); - else if (tlb_type == cheetah || tlb_type == cheetah_plus) - cheetah_xcall_deliver(data0, 0, 0, mask); - else if (tlb_type == hypervisor) - hypervisor_xcall_deliver(data0, 0, 0, mask); - } + if (cpu_online(cpu)) + __smp_receive_signal_mask(mask); } void smp_receive_signal_client(int irq, struct pt_regs *regs) { - /* Just return, rtrap takes care of the rest. */ + struct mm_struct *mm; + clear_softint(1 << irq); + + /* See if we need to allocate a new TLB context because + * the version of the one we are using is now out of date. + */ + mm = current->active_mm; + if (likely(mm)) { + if (unlikely(!CTX_VALID(mm->context))) { + unsigned long flags; + + spin_lock_irqsave(&mm->context.lock, flags); + get_new_mmu_context(mm); + load_secondary_context(mm); + spin_unlock_irqrestore(&mm->context.lock, flags); + } + } +} + +void smp_new_mmu_context_version(void) +{ + __smp_receive_signal_mask(cpu_online_map); } void smp_report_regs(void) diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 16f0db38d93..ccf083aecb6 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -629,17 +629,20 @@ void __flush_dcache_range(unsigned long start, unsigned long end) * let the user have CTX 0 (nucleus) or we ever use a CTX * version of zero (and thus NO_CONTEXT would not be caught * by version mis-match tests in mmu_context.h). + * + * Always invoked with interrupts disabled. */ void get_new_mmu_context(struct mm_struct *mm) { unsigned long ctx, new_ctx; unsigned long orig_pgsz_bits; - + int new_version; spin_lock(&ctx_alloc_lock); orig_pgsz_bits = (mm->context.sparc64_ctx_val & CTX_PGSZ_MASK); ctx = (tlb_context_cache + 1) & CTX_NR_MASK; new_ctx = find_next_zero_bit(mmu_context_bmap, 1 << CTX_NR_BITS, ctx); + new_version = 0; if (new_ctx >= (1 << CTX_NR_BITS)) { new_ctx = find_next_zero_bit(mmu_context_bmap, ctx, 1); if (new_ctx >= ctx) { @@ -662,6 +665,7 @@ void get_new_mmu_context(struct mm_struct *mm) mmu_context_bmap[i + 2] = 0; mmu_context_bmap[i + 3] = 0; } + new_version = 1; goto out; } } @@ -671,6 +675,9 @@ out: tlb_context_cache = new_ctx; mm->context.sparc64_ctx_val = new_ctx | orig_pgsz_bits; spin_unlock(&ctx_alloc_lock); + + if (unlikely(new_version)) + smp_new_mmu_context_version(); } void sparc_ultra_dump_itlb(void) -- cgit v1.2.3-18-g5258 From 77b838fa1ef0ab02f75afc09834c60d87b86772f Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 23 Feb 2006 21:40:15 -0800 Subject: [SPARC64]: destroy_context() needs to disable interrupts. get_new_mmu_context() can be invoked from interrupt context now for the new SMP version wrap handling. So disable interrupt while taking ctx_alloc_lock in destroy_context() so we don't deadlock. Signed-off-by: David S. Miller --- arch/sparc64/mm/tsb.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/mm/tsb.c b/arch/sparc64/mm/tsb.c index 353cb060561..534ac281989 100644 --- a/arch/sparc64/mm/tsb.c +++ b/arch/sparc64/mm/tsb.c @@ -373,6 +373,7 @@ int init_new_context(struct task_struct *tsk, struct mm_struct *mm) void destroy_context(struct mm_struct *mm) { unsigned long size = mm->context.tsb_nentries * sizeof(struct tsb); + unsigned long flags; free_pages((unsigned long) mm->context.tsb, get_order(size)); @@ -383,12 +384,12 @@ void destroy_context(struct mm_struct *mm) mm->context.tsb = NULL; mm->context.tsb_reg_val = 0UL; - spin_lock(&ctx_alloc_lock); + spin_lock_irqsave(&ctx_alloc_lock, flags); if (CTX_VALID(mm->context)) { unsigned long nr = CTX_NRBITS(mm->context); mmu_context_bmap[nr>>6] &= ~(1UL << (nr & 63)); } - spin_unlock(&ctx_alloc_lock); + spin_unlock_irqrestore(&ctx_alloc_lock, flags); } -- cgit v1.2.3-18-g5258 From c4e9249b1924118693f298ee8d38f7fe43587af3 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Fri, 24 Feb 2006 13:21:18 -0800 Subject: [SPARC64]: Fix binfmt_aout32.c build. Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- arch/sparc64/kernel/binfmt_aout32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/binfmt_aout32.c b/arch/sparc64/kernel/binfmt_aout32.c index 181c8cdf954..cb9ecd0172c 100644 --- a/arch/sparc64/kernel/binfmt_aout32.c +++ b/arch/sparc64/kernel/binfmt_aout32.c @@ -330,7 +330,7 @@ beyond_if: current->mm->start_stack = (unsigned long) create_aout32_tables((char __user *)bprm->p, bprm); - tsb_context_switch(mm); + tsb_context_switch(current->mm); start_thread32(regs, ex.a_entry, current->mm->start_stack); if (current->ptrace & PT_PTRACED) -- cgit v1.2.3-18-g5258 From 36344762396ca868d6076c41a84bda25f1ed9d3c Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 25 Feb 2006 17:16:29 -0800 Subject: [SPARC64]: Niagara optimized XOR functions for RAID. Signed-off-by: David S. Miller --- arch/sparc64/kernel/sparc64_ksyms.c | 13 ++ arch/sparc64/lib/xor.S | 300 +++++++++++++++++++++++++++++++++++- 2 files changed, 312 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/sparc64_ksyms.c b/arch/sparc64/kernel/sparc64_ksyms.c index 801fc0ce484..e87fe7dfc7d 100644 --- a/arch/sparc64/kernel/sparc64_ksyms.c +++ b/arch/sparc64/kernel/sparc64_ksyms.c @@ -108,6 +108,14 @@ extern void xor_vis_4(unsigned long, unsigned long *, unsigned long *, extern void xor_vis_5(unsigned long, unsigned long *, unsigned long *, unsigned long *, unsigned long *, unsigned long *); +extern void xor_niagara_2(unsigned long, unsigned long *, unsigned long *); +extern void xor_niagara_3(unsigned long, unsigned long *, unsigned long *, + unsigned long *); +extern void xor_niagara_4(unsigned long, unsigned long *, unsigned long *, + unsigned long *, unsigned long *); +extern void xor_niagara_5(unsigned long, unsigned long *, unsigned long *, + unsigned long *, unsigned long *, unsigned long *); + /* Per-CPU information table */ EXPORT_PER_CPU_SYMBOL(__cpu_data); @@ -388,4 +396,9 @@ EXPORT_SYMBOL(xor_vis_3); EXPORT_SYMBOL(xor_vis_4); EXPORT_SYMBOL(xor_vis_5); +EXPORT_SYMBOL(xor_niagara_2); +EXPORT_SYMBOL(xor_niagara_3); +EXPORT_SYMBOL(xor_niagara_4); +EXPORT_SYMBOL(xor_niagara_5); + EXPORT_SYMBOL(prom_palette); diff --git a/arch/sparc64/lib/xor.S b/arch/sparc64/lib/xor.S index 4cd5d2be1ae..a79c8888170 100644 --- a/arch/sparc64/lib/xor.S +++ b/arch/sparc64/lib/xor.S @@ -2,9 +2,10 @@ * arch/sparc64/lib/xor.S * * High speed xor_block operation for RAID4/5 utilizing the - * UltraSparc Visual Instruction Set. + * UltraSparc Visual Instruction Set and Niagara store-init/twin-load. * * Copyright (C) 1997, 1999 Jakub Jelinek (jj@ultra.linux.cz) + * Copyright (C) 2006 David S. Miller */ #include @@ -19,6 +20,8 @@ */ .text .align 32 + + /* VIS versions. */ .globl xor_vis_2 .type xor_vis_2,#function xor_vis_2: @@ -352,3 +355,298 @@ xor_vis_5: ret restore .size xor_vis_5, .-xor_vis_5 + + /* Niagara versions. */ + .globl xor_niagara_2 + .type xor_niagara_2,#function +xor_niagara_2: /* %o0=bytes, %o1=dest, %o2=src */ + save %sp, -192, %sp + prefetch [%i1], #n_writes + prefetch [%i2], #one_read + rd %asi, %g7 + wr %g0, ASI_BLK_INIT_QUAD_LDD_P, %asi + srlx %i0, 6, %g1 + mov %i1, %i0 + mov %i2, %i1 +1: ldda [%i1 + 0x00] %asi, %i2 /* %i2/%i3 = src + 0x00 */ + ldda [%i1 + 0x10] %asi, %i4 /* %i4/%i5 = src + 0x10 */ + ldda [%i1 + 0x20] %asi, %g2 /* %g2/%g3 = src + 0x20 */ + ldda [%i1 + 0x30] %asi, %l0 /* %l0/%l1 = src + 0x30 */ + prefetch [%i1 + 0x40], #one_read + ldda [%i0 + 0x00] %asi, %o0 /* %o0/%o1 = dest + 0x00 */ + ldda [%i0 + 0x10] %asi, %o2 /* %o2/%o3 = dest + 0x10 */ + ldda [%i0 + 0x20] %asi, %o4 /* %o4/%o5 = dest + 0x20 */ + ldda [%i0 + 0x30] %asi, %l2 /* %l2/%l3 = dest + 0x30 */ + prefetch [%i0 + 0x40], #n_writes + xor %o0, %i2, %o0 + xor %o1, %i3, %o1 + stxa %o0, [%i0 + 0x00] %asi + stxa %o1, [%i0 + 0x08] %asi + xor %o2, %i4, %o2 + xor %o3, %i5, %o3 + stxa %o2, [%i0 + 0x10] %asi + stxa %o3, [%i0 + 0x18] %asi + xor %o4, %g2, %o4 + xor %o5, %g3, %o5 + stxa %o4, [%i0 + 0x20] %asi + stxa %o5, [%i0 + 0x28] %asi + xor %l2, %l0, %l2 + xor %l3, %l1, %l3 + stxa %l2, [%i0 + 0x30] %asi + stxa %l3, [%i0 + 0x38] %asi + add %i0, 0x40, %i0 + subcc %g1, 1, %g1 + bne,pt %xcc, 1b + add %i1, 0x40, %i1 + membar #Sync + wr %g7, 0x0, %asi + ret + restore + .size xor_niagara_2, .-xor_niagara_2 + + .globl xor_niagara_3 + .type xor_niagara_3,#function +xor_niagara_3: /* %o0=bytes, %o1=dest, %o2=src1, %o3=src2 */ + save %sp, -192, %sp + prefetch [%i1], #n_writes + prefetch [%i2], #one_read + prefetch [%i3], #one_read + rd %asi, %g7 + wr %g0, ASI_BLK_INIT_QUAD_LDD_P, %asi + srlx %i0, 6, %g1 + mov %i1, %i0 + mov %i2, %i1 + mov %i3, %l7 +1: ldda [%i1 + 0x00] %asi, %i2 /* %i2/%i3 = src1 + 0x00 */ + ldda [%i1 + 0x10] %asi, %i4 /* %i4/%i5 = src1 + 0x10 */ + ldda [%l7 + 0x00] %asi, %g2 /* %g2/%g3 = src2 + 0x00 */ + ldda [%l7 + 0x10] %asi, %l0 /* %l0/%l1 = src2 + 0x10 */ + ldda [%i0 + 0x00] %asi, %o0 /* %o0/%o1 = dest + 0x00 */ + ldda [%i0 + 0x10] %asi, %o2 /* %o2/%o3 = dest + 0x10 */ + xor %g2, %i2, %g2 + xor %g3, %i3, %g3 + xor %o0, %g2, %o0 + xor %o1, %g3, %o1 + stxa %o0, [%i0 + 0x00] %asi + stxa %o1, [%i0 + 0x08] %asi + ldda [%i1 + 0x20] %asi, %i2 /* %i2/%i3 = src1 + 0x20 */ + ldda [%l7 + 0x20] %asi, %g2 /* %g2/%g3 = src2 + 0x20 */ + ldda [%i0 + 0x20] %asi, %o0 /* %o0/%o1 = dest + 0x20 */ + xor %l0, %i4, %l0 + xor %l1, %i5, %l1 + xor %o2, %l0, %o2 + xor %o3, %l1, %o3 + stxa %o2, [%i0 + 0x10] %asi + stxa %o3, [%i0 + 0x18] %asi + ldda [%i1 + 0x30] %asi, %i4 /* %i4/%i5 = src1 + 0x30 */ + ldda [%l7 + 0x30] %asi, %l0 /* %l0/%l1 = src2 + 0x30 */ + ldda [%i0 + 0x30] %asi, %o2 /* %o2/%o3 = dest + 0x30 */ + prefetch [%i1 + 0x40], #one_read + prefetch [%l7 + 0x40], #one_read + prefetch [%i0 + 0x40], #n_writes + xor %g2, %i2, %g2 + xor %g3, %i3, %g3 + xor %o0, %g2, %o0 + xor %o1, %g3, %o1 + stxa %o0, [%i0 + 0x20] %asi + stxa %o1, [%i0 + 0x28] %asi + xor %l0, %i4, %l0 + xor %l1, %i5, %l1 + xor %o2, %l0, %o2 + xor %o3, %l1, %o3 + stxa %o2, [%i0 + 0x30] %asi + stxa %o3, [%i0 + 0x38] %asi + add %i0, 0x40, %i0 + add %i1, 0x40, %i1 + subcc %g1, 1, %g1 + bne,pt %xcc, 1b + add %l7, 0x40, %l7 + membar #Sync + wr %g7, 0x0, %asi + ret + restore + .size xor_niagara_3, .-xor_niagara_3 + + .globl xor_niagara_4 + .type xor_niagara_4,#function +xor_niagara_4: /* %o0=bytes, %o1=dest, %o2=src1, %o3=src2, %o4=src3 */ + save %sp, -192, %sp + prefetch [%i1], #n_writes + prefetch [%i2], #one_read + prefetch [%i3], #one_read + prefetch [%i4], #one_read + rd %asi, %g7 + wr %g0, ASI_BLK_INIT_QUAD_LDD_P, %asi + srlx %i0, 6, %g1 + mov %i1, %i0 + mov %i2, %i1 + mov %i3, %l7 + mov %i4, %l6 +1: ldda [%i1 + 0x00] %asi, %i2 /* %i2/%i3 = src1 + 0x00 */ + ldda [%l7 + 0x00] %asi, %i4 /* %i4/%i5 = src2 + 0x00 */ + ldda [%l6 + 0x00] %asi, %g2 /* %g2/%g3 = src3 + 0x00 */ + ldda [%i0 + 0x00] %asi, %l0 /* %l0/%l1 = dest + 0x00 */ + xor %i4, %i2, %i4 + xor %i5, %i3, %i5 + ldda [%i1 + 0x10] %asi, %i2 /* %i2/%i3 = src1 + 0x10 */ + xor %g2, %i4, %g2 + xor %g3, %i5, %g3 + ldda [%i7 + 0x10] %asi, %i4 /* %i4/%i5 = src2 + 0x10 */ + xor %l0, %g2, %l0 + xor %l1, %g3, %l1 + stxa %l0, [%i0 + 0x00] %asi + stxa %l1, [%i0 + 0x08] %asi + ldda [%i6 + 0x10] %asi, %g2 /* %g2/%g3 = src3 + 0x10 */ + ldda [%i0 + 0x10] %asi, %l0 /* %l0/%l1 = dest + 0x10 */ + + xor %i4, %i2, %i4 + xor %i5, %i3, %i5 + ldda [%i1 + 0x20] %asi, %i2 /* %i2/%i3 = src1 + 0x20 */ + xor %g2, %i4, %g2 + xor %g3, %i5, %g3 + ldda [%i7 + 0x20] %asi, %i4 /* %i4/%i5 = src2 + 0x20 */ + xor %l0, %g2, %l0 + xor %l1, %g3, %l1 + stxa %l0, [%i0 + 0x10] %asi + stxa %l1, [%i0 + 0x18] %asi + ldda [%i6 + 0x20] %asi, %g2 /* %g2/%g3 = src3 + 0x20 */ + ldda [%i0 + 0x20] %asi, %l0 /* %l0/%l1 = dest + 0x20 */ + + xor %i4, %i2, %i4 + xor %i5, %i3, %i5 + ldda [%i1 + 0x30] %asi, %i2 /* %i2/%i3 = src1 + 0x30 */ + xor %g2, %i4, %g2 + xor %g3, %i5, %g3 + ldda [%i7 + 0x30] %asi, %i4 /* %i4/%i5 = src2 + 0x30 */ + xor %l0, %g2, %l0 + xor %l1, %g3, %l1 + stxa %l0, [%i0 + 0x20] %asi + stxa %l1, [%i0 + 0x28] %asi + ldda [%i6 + 0x30] %asi, %g2 /* %g2/%g3 = src3 + 0x30 */ + ldda [%i0 + 0x30] %asi, %l0 /* %l0/%l1 = dest + 0x30 */ + + prefetch [%i1 + 0x40], #one_read + prefetch [%l7 + 0x40], #one_read + prefetch [%l6 + 0x40], #one_read + prefetch [%i0 + 0x40], #n_writes + + xor %i4, %i2, %i4 + xor %i5, %i3, %i5 + xor %g2, %i4, %g2 + xor %g3, %i5, %g3 + xor %l0, %g2, %l0 + xor %l1, %g3, %l1 + stxa %l0, [%i0 + 0x30] %asi + stxa %l1, [%i0 + 0x38] %asi + + add %i0, 0x40, %i0 + add %i1, 0x40, %i1 + add %l7, 0x40, %l7 + subcc %g1, 1, %g1 + bne,pt %xcc, 1b + add %l6, 0x40, %l6 + membar #Sync + wr %g7, 0x0, %asi + ret + restore + .size xor_niagara_4, .-xor_niagara_4 + + .globl xor_niagara_5 + .type xor_niagara_5,#function +xor_niagara_5: /* %o0=bytes, %o1=dest, %o2=src1, %o3=src2, %o4=src3, %o5=src4 */ + save %sp, -192, %sp + prefetch [%i1], #n_writes + prefetch [%i2], #one_read + prefetch [%i3], #one_read + prefetch [%i4], #one_read + prefetch [%i5], #one_read + rd %asi, %g7 + wr %g0, ASI_BLK_INIT_QUAD_LDD_P, %asi + srlx %i0, 6, %g1 + mov %i1, %i0 + mov %i2, %i1 + mov %i3, %l7 + mov %i4, %l6 + mov %i5, %l5 +1: ldda [%i1 + 0x00] %asi, %i2 /* %i2/%i3 = src1 + 0x00 */ + ldda [%l7 + 0x00] %asi, %i4 /* %i4/%i5 = src2 + 0x00 */ + ldda [%l6 + 0x00] %asi, %g2 /* %g2/%g3 = src3 + 0x00 */ + ldda [%l5 + 0x00] %asi, %l0 /* %l0/%l1 = src4 + 0x00 */ + ldda [%i0 + 0x00] %asi, %l2 /* %l2/%l3 = dest + 0x00 */ + xor %i4, %i2, %i4 + xor %i5, %i3, %i5 + ldda [%i1 + 0x10] %asi, %i2 /* %i2/%i3 = src1 + 0x10 */ + xor %g2, %i4, %g2 + xor %g3, %i5, %g3 + ldda [%l7 + 0x10] %asi, %i4 /* %i4/%i5 = src2 + 0x10 */ + xor %l0, %g2, %l0 + xor %l1, %g3, %l1 + ldda [%l6 + 0x10] %asi, %g2 /* %g2/%g3 = src3 + 0x10 */ + xor %l2, %l0, %l2 + xor %l3, %l1, %l3 + stxa %l2, [%i0 + 0x00] %asi + stxa %l3, [%i0 + 0x08] %asi + ldda [%l5 + 0x10] %asi, %l0 /* %l0/%l1 = src4 + 0x10 */ + ldda [%i0 + 0x10] %asi, %l2 /* %l2/%l3 = dest + 0x10 */ + + xor %i4, %i2, %i4 + xor %i5, %i3, %i5 + ldda [%i1 + 0x20] %asi, %i2 /* %i2/%i3 = src1 + 0x20 */ + xor %g2, %i4, %g2 + xor %g3, %i5, %g3 + ldda [%l7 + 0x20] %asi, %i4 /* %i4/%i5 = src2 + 0x20 */ + xor %l0, %g2, %l0 + xor %l1, %g3, %l1 + ldda [%l6 + 0x20] %asi, %g2 /* %g2/%g3 = src3 + 0x20 */ + xor %l2, %l0, %l2 + xor %l3, %l1, %l3 + stxa %l2, [%i0 + 0x10] %asi + stxa %l3, [%i0 + 0x18] %asi + ldda [%l5 + 0x20] %asi, %l0 /* %l0/%l1 = src4 + 0x20 */ + ldda [%i0 + 0x20] %asi, %l2 /* %l2/%l3 = dest + 0x20 */ + + xor %i4, %i2, %i4 + xor %i5, %i3, %i5 + ldda [%i1 + 0x30] %asi, %i2 /* %i2/%i3 = src1 + 0x30 */ + xor %g2, %i4, %g2 + xor %g3, %i5, %g3 + ldda [%l7 + 0x30] %asi, %i4 /* %i4/%i5 = src2 + 0x30 */ + xor %l0, %g2, %l0 + xor %l1, %g3, %l1 + ldda [%l6 + 0x30] %asi, %g2 /* %g2/%g3 = src3 + 0x30 */ + xor %l2, %l0, %l2 + xor %l3, %l1, %l3 + stxa %l2, [%i0 + 0x20] %asi + stxa %l3, [%i0 + 0x28] %asi + ldda [%l5 + 0x30] %asi, %l0 /* %l0/%l1 = src4 + 0x30 */ + ldda [%i0 + 0x30] %asi, %l2 /* %l2/%l3 = dest + 0x30 */ + + prefetch [%i1 + 0x40], #one_read + prefetch [%l7 + 0x40], #one_read + prefetch [%l6 + 0x40], #one_read + prefetch [%l5 + 0x40], #one_read + prefetch [%i0 + 0x40], #n_writes + + xor %i4, %i2, %i4 + xor %i5, %i3, %i5 + xor %g2, %i4, %g2 + xor %g3, %i5, %g3 + xor %l0, %g2, %l0 + xor %l1, %g3, %l1 + xor %l2, %l0, %l2 + xor %l3, %l1, %l3 + stxa %l2, [%i0 + 0x30] %asi + stxa %l3, [%i0 + 0x38] %asi + + add %i0, 0x40, %i0 + add %i1, 0x40, %i1 + add %l7, 0x40, %l7 + add %l6, 0x40, %l6 + subcc %g1, 1, %g1 + bne,pt %xcc, 1b + add %l5, 0x40, %l5 + membar #Sync + wr %g7, 0x0, %asi + ret + restore + .size xor_niagara_5, .-xor_niagara_5 -- cgit v1.2.3-18-g5258 From 6cc80cfab8b2ce1919ad5862a43f6b7bcf163c80 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 26 Feb 2006 14:51:29 -0800 Subject: [SPARC64]: Report mondo error correctly in hypervisor_xcall_deliver(). It's in "arg0" not "func". Signed-off-by: David S. Miller --- arch/sparc64/kernel/smp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 1ce94081149..5ff2483e70b 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -617,7 +617,7 @@ static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t if (unlikely(++retries > 100)) { printk("CPU[%d]: sun4v mondo error %lu\n", - this_cpu, func); + this_cpu, arg0); break; } -- cgit v1.2.3-18-g5258 From 2a3a5f5ddbefde498e87f10924d4bf741c5bf37f Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 26 Feb 2006 19:31:49 -0800 Subject: [SPARC64]: Bulletproof hypervisor TLB flushing. Check TLB flush hypervisor calls for errors and report them. Pass HV_MMU_ALL always for now, we can add back the optimization to avoid the I-TLB flush later. Always explicitly page align the virtual address arguments. Signed-off-by: David S. Miller --- arch/sparc64/kernel/traps.c | 12 ++++++ arch/sparc64/mm/ultra.S | 94 ++++++++++++++++++++++++++++++++------------- 2 files changed, 80 insertions(+), 26 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c index 8df0cf29e3e..043a72658f6 100644 --- a/arch/sparc64/kernel/traps.c +++ b/arch/sparc64/kernel/traps.c @@ -1968,6 +1968,18 @@ void sun4v_dtlb_error_report(struct pt_regs *regs, int tl) prom_halt(); } +void hypervisor_tlbop_error(unsigned long err, unsigned long op) +{ + printk(KERN_CRIT "SUN4V: TLB hv call error %lu for op %lu\n", + err, op); +} + +void hypervisor_tlbop_error_xcall(unsigned long err, unsigned long op) +{ + printk(KERN_CRIT "SUN4V: XCALL TLB hv call error %lu for op %lu\n", + err, op); +} + void do_fpe_common(struct pt_regs *regs) { if (regs->tstate & TSTATE_PRIV) { diff --git a/arch/sparc64/mm/ultra.S b/arch/sparc64/mm/ultra.S index 725f8b34af4..bd8b0b4f878 100644 --- a/arch/sparc64/mm/ultra.S +++ b/arch/sparc64/mm/ultra.S @@ -257,17 +257,27 @@ __cheetah_flush_dcache_page: /* 11 insns */ #endif /* DCACHE_ALIASING_POSSIBLE */ /* Hypervisor specific versions, patched at boot time. */ -__hypervisor_flush_tlb_mm: /* 8 insns */ +__hypervisor_tlb_tl0_error: + save %sp, -192, %sp + mov %i0, %o0 + call hypervisor_tlbop_error + mov %i1, %o1 + ret + restore + +__hypervisor_flush_tlb_mm: /* 10 insns */ mov %o0, %o2 /* ARG2: mmu context */ mov 0, %o0 /* ARG0: CPU lists unimplemented */ mov 0, %o1 /* ARG1: CPU lists unimplemented */ mov HV_MMU_ALL, %o3 /* ARG3: flags */ mov HV_FAST_MMU_DEMAP_CTX, %o5 ta HV_FAST_TRAP + brnz,pn %o0, __hypervisor_tlb_tl0_error + mov HV_FAST_MMU_DEMAP_CTX, %o1 retl nop -__hypervisor_flush_tlb_pending: /* 15 insns */ +__hypervisor_flush_tlb_pending: /* 16 insns */ /* %o0 = context, %o1 = nr, %o2 = vaddrs[] */ sllx %o1, 3, %g1 mov %o2, %g2 @@ -275,17 +285,18 @@ __hypervisor_flush_tlb_pending: /* 15 insns */ 1: sub %g1, (1 << 3), %g1 ldx [%g2 + %g1], %o0 /* ARG0: vaddr + IMMU-bit */ mov %g3, %o1 /* ARG1: mmu context */ - mov HV_MMU_DMMU, %o2 - andcc %o0, 1, %g0 - movne %icc, HV_MMU_ALL, %o2 /* ARG2: flags */ - andn %o0, 1, %o0 + mov HV_MMU_ALL, %o2 /* ARG2: flags */ + srlx %o0, PAGE_SHIFT, %o0 + sllx %o0, PAGE_SHIFT, %o0 ta HV_MMU_UNMAP_ADDR_TRAP + brnz,pn %o0, __hypervisor_tlb_tl0_error + mov HV_MMU_UNMAP_ADDR_TRAP, %o1 brnz,pt %g1, 1b nop retl nop -__hypervisor_flush_tlb_kernel_range: /* 14 insns */ +__hypervisor_flush_tlb_kernel_range: /* 16 insns */ /* %o0=start, %o1=end */ cmp %o0, %o1 be,pn %xcc, 2f @@ -297,6 +308,8 @@ __hypervisor_flush_tlb_kernel_range: /* 14 insns */ mov 0, %o1 /* ARG1: mmu context */ mov HV_MMU_ALL, %o2 /* ARG2: flags */ ta HV_MMU_UNMAP_ADDR_TRAP + brnz,pn %o0, __hypervisor_tlb_tl0_error + mov HV_MMU_UNMAP_ADDR_TRAP, %o1 brnz,pt %g2, 1b sub %g2, %g3, %g2 2: retl @@ -369,7 +382,7 @@ cheetah_patch_cachetlbops: */ .align 32 .globl xcall_flush_tlb_mm -xcall_flush_tlb_mm: /* 18 insns */ +xcall_flush_tlb_mm: /* 21 insns */ mov PRIMARY_CONTEXT, %g2 ldxa [%g2] ASI_DMMU, %g3 srlx %g3, CTX_PGSZ1_NUC_SHIFT, %g4 @@ -388,9 +401,12 @@ xcall_flush_tlb_mm: /* 18 insns */ nop nop nop + nop + nop + nop .globl xcall_flush_tlb_pending -xcall_flush_tlb_pending: /* 20 insns */ +xcall_flush_tlb_pending: /* 21 insns */ /* %g5=context, %g1=nr, %g7=vaddrs[] */ sllx %g1, 3, %g1 mov PRIMARY_CONTEXT, %g4 @@ -413,9 +429,10 @@ xcall_flush_tlb_pending: /* 20 insns */ nop stxa %g2, [%g4] ASI_DMMU retry + nop .globl xcall_flush_tlb_kernel_range -xcall_flush_tlb_kernel_range: /* 22 insns */ +xcall_flush_tlb_kernel_range: /* 25 insns */ sethi %hi(PAGE_SIZE - 1), %g2 or %g2, %lo(PAGE_SIZE - 1), %g2 andn %g1, %g2, %g1 @@ -438,6 +455,9 @@ xcall_flush_tlb_kernel_range: /* 22 insns */ nop nop nop + nop + nop + nop /* This runs in a very controlled environment, so we do * not need to worry about BH races etc. @@ -545,8 +565,21 @@ xcall_flush_dcache_page_spitfire: /* %g1 == physical page address nop nop + /* %g5: error + * %g6: tlb op + */ +__hypervisor_tlb_xcall_error: + mov %g5, %g4 + mov %g6, %g5 + ba,pt %xcc, etrap + rd %pc, %g7 + mov %l4, %o0 + call hypervisor_tlbop_error_xcall + mov %l5, %o1 + ba,a,pt %xcc, rtrap_clr_l6 + .globl __hypervisor_xcall_flush_tlb_mm -__hypervisor_xcall_flush_tlb_mm: /* 18 insns */ +__hypervisor_xcall_flush_tlb_mm: /* 21 insns */ /* %g5=ctx, g1,g2,g3,g4,g7=scratch, %g6=unusable */ mov %o0, %g2 mov %o1, %g3 @@ -559,6 +592,9 @@ __hypervisor_xcall_flush_tlb_mm: /* 18 insns */ mov HV_MMU_ALL, %o3 /* ARG3: flags */ mov HV_FAST_MMU_DEMAP_CTX, %o5 ta HV_FAST_TRAP + mov HV_FAST_MMU_DEMAP_CTX, %g6 + brnz,pn %o0, __hypervisor_tlb_xcall_error + mov %o0, %g5 mov %g2, %o0 mov %g3, %o1 mov %g4, %o2 @@ -568,8 +604,8 @@ __hypervisor_xcall_flush_tlb_mm: /* 18 insns */ retry .globl __hypervisor_xcall_flush_tlb_pending -__hypervisor_xcall_flush_tlb_pending: /* 18 insns */ - /* %g5=ctx, %g1=nr, %g7=vaddrs[], %g2,%g3,%g4=scratch, %g6=unusable */ +__hypervisor_xcall_flush_tlb_pending: /* 21 insns */ + /* %g5=ctx, %g1=nr, %g7=vaddrs[], %g2,%g3,%g4,g6=scratch */ sllx %g1, 3, %g1 mov %o0, %g2 mov %o1, %g3 @@ -577,10 +613,13 @@ __hypervisor_xcall_flush_tlb_pending: /* 18 insns */ 1: sub %g1, (1 << 3), %g1 ldx [%g7 + %g1], %o0 /* ARG0: virtual address */ mov %g5, %o1 /* ARG1: mmu context */ - mov HV_MMU_DMMU, %o2 - andcc %o0, 1, %g0 - movne %icc, HV_MMU_ALL, %o2 /* ARG2: flags */ + mov HV_MMU_ALL, %o2 /* ARG2: flags */ + srlx %o0, PAGE_SHIFT, %o0 + sllx %o0, PAGE_SHIFT, %o0 ta HV_MMU_UNMAP_ADDR_TRAP + mov HV_MMU_UNMAP_ADDR_TRAP, %g6 + brnz,a,pn %o0, __hypervisor_tlb_xcall_error + mov %o0, %g5 brnz,pt %g1, 1b nop mov %g2, %o0 @@ -590,8 +629,8 @@ __hypervisor_xcall_flush_tlb_pending: /* 18 insns */ retry .globl __hypervisor_xcall_flush_tlb_kernel_range -__hypervisor_xcall_flush_tlb_kernel_range: /* 22 insns */ - /* %g1=start, %g7=end, g2,g3,g4,g5=scratch, g6=unusable */ +__hypervisor_xcall_flush_tlb_kernel_range: /* 25 insns */ + /* %g1=start, %g7=end, g2,g3,g4,g5,g6=scratch */ sethi %hi(PAGE_SIZE - 1), %g2 or %g2, %lo(PAGE_SIZE - 1), %g2 andn %g1, %g2, %g1 @@ -601,17 +640,20 @@ __hypervisor_xcall_flush_tlb_kernel_range: /* 22 insns */ sub %g3, %g2, %g3 mov %o0, %g2 mov %o1, %g4 - mov %o2, %g5 + mov %o2, %g7 1: add %g1, %g3, %o0 /* ARG0: virtual address */ mov 0, %o1 /* ARG1: mmu context */ mov HV_MMU_ALL, %o2 /* ARG2: flags */ ta HV_MMU_UNMAP_ADDR_TRAP + mov HV_MMU_UNMAP_ADDR_TRAP, %g6 + brnz,pn %o0, __hypervisor_tlb_xcall_error + mov %o0, %g5 sethi %hi(PAGE_SIZE), %o2 brnz,pt %g3, 1b sub %g3, %o2, %g3 mov %g2, %o0 mov %g4, %o1 - mov %g5, %o2 + mov %g7, %o2 membar #Sync retry @@ -643,21 +685,21 @@ hypervisor_patch_cachetlbops: sethi %hi(__hypervisor_flush_tlb_mm), %o1 or %o1, %lo(__hypervisor_flush_tlb_mm), %o1 call tlb_patch_one - mov 8, %o2 + mov 10, %o2 sethi %hi(__flush_tlb_pending), %o0 or %o0, %lo(__flush_tlb_pending), %o0 sethi %hi(__hypervisor_flush_tlb_pending), %o1 or %o1, %lo(__hypervisor_flush_tlb_pending), %o1 call tlb_patch_one - mov 15, %o2 + mov 16, %o2 sethi %hi(__flush_tlb_kernel_range), %o0 or %o0, %lo(__flush_tlb_kernel_range), %o0 sethi %hi(__hypervisor_flush_tlb_kernel_range), %o1 or %o1, %lo(__hypervisor_flush_tlb_kernel_range), %o1 call tlb_patch_one - mov 14, %o2 + mov 16, %o2 #ifdef DCACHE_ALIASING_POSSIBLE sethi %hi(__flush_dcache_page), %o0 @@ -674,21 +716,21 @@ hypervisor_patch_cachetlbops: sethi %hi(__hypervisor_xcall_flush_tlb_mm), %o1 or %o1, %lo(__hypervisor_xcall_flush_tlb_mm), %o1 call tlb_patch_one - mov 18, %o2 + mov 21, %o2 sethi %hi(xcall_flush_tlb_pending), %o0 or %o0, %lo(xcall_flush_tlb_pending), %o0 sethi %hi(__hypervisor_xcall_flush_tlb_pending), %o1 or %o1, %lo(__hypervisor_xcall_flush_tlb_pending), %o1 call tlb_patch_one - mov 18, %o2 + mov 21, %o2 sethi %hi(xcall_flush_tlb_kernel_range), %o0 or %o0, %lo(xcall_flush_tlb_kernel_range), %o0 sethi %hi(__hypervisor_xcall_flush_tlb_kernel_range), %o1 or %o1, %lo(__hypervisor_xcall_flush_tlb_kernel_range), %o1 call tlb_patch_one - mov 22, %o2 + mov 25, %o2 #endif /* CONFIG_SMP */ ret -- cgit v1.2.3-18-g5258 From 7a591cfe4efef8a232e4938d44ae6693b319f6d7 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 26 Feb 2006 19:44:50 -0800 Subject: [SPARC64]: Avoid dcache-dirty page state management on sun4v. It is totally wasted work, since we have no D-cache aliasing issues on sun4v. Signed-off-by: David S. Miller --- arch/sparc64/mm/init.c | 50 ++++++++++++++++++++++++++++---------------------- arch/sparc64/mm/tlb.c | 3 ++- 2 files changed, 30 insertions(+), 23 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index ccf083aecb6..87d5d1af1ad 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -188,8 +188,9 @@ atomic_t dcpage_flushes_xcall = ATOMIC_INIT(0); #endif #endif -__inline__ void flush_dcache_page_impl(struct page *page) +inline void flush_dcache_page_impl(struct page *page) { + BUG_ON(tlb_type == hypervisor); #ifdef CONFIG_DEBUG_DCFLUSH atomic_inc(&dcpage_flushes); #endif @@ -279,29 +280,31 @@ unsigned long _PAGE_SZBITS __read_mostly; void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte) { struct mm_struct *mm; - struct page *page; - unsigned long pfn; - unsigned long pg_flags; - - pfn = pte_pfn(pte); - if (pfn_valid(pfn) && - (page = pfn_to_page(pfn), page_mapping(page)) && - ((pg_flags = page->flags) & (1UL << PG_dcache_dirty))) { - int cpu = ((pg_flags >> PG_dcache_cpu_shift) & - PG_dcache_cpu_mask); - int this_cpu = get_cpu(); - - /* This is just to optimize away some function calls - * in the SMP case. - */ - if (cpu == this_cpu) - flush_dcache_page_impl(page); - else - smp_flush_dcache_page_impl(page, cpu); - clear_dcache_dirty_cpu(page, cpu); + if (tlb_type != hypervisor) { + unsigned long pfn = pte_pfn(pte); + unsigned long pg_flags; + struct page *page; + + if (pfn_valid(pfn) && + (page = pfn_to_page(pfn), page_mapping(page)) && + ((pg_flags = page->flags) & (1UL << PG_dcache_dirty))) { + int cpu = ((pg_flags >> PG_dcache_cpu_shift) & + PG_dcache_cpu_mask); + int this_cpu = get_cpu(); + + /* This is just to optimize away some function calls + * in the SMP case. + */ + if (cpu == this_cpu) + flush_dcache_page_impl(page); + else + smp_flush_dcache_page_impl(page, cpu); + + clear_dcache_dirty_cpu(page, cpu); - put_cpu(); + put_cpu(); + } } mm = vma->vm_mm; @@ -321,6 +324,9 @@ void flush_dcache_page(struct page *page) struct address_space *mapping; int this_cpu; + if (tlb_type == hypervisor) + return; + /* Do not bother with the expensive D-cache flush if it * is merely the zero page. The 'bigcore' testcase in GDB * causes this case to run millions of times. diff --git a/arch/sparc64/mm/tlb.c b/arch/sparc64/mm/tlb.c index 78357cc2a0b..a079cf42505 100644 --- a/arch/sparc64/mm/tlb.c +++ b/arch/sparc64/mm/tlb.c @@ -49,7 +49,8 @@ void tlb_batch_add(struct mm_struct *mm, unsigned long vaddr, pte_t *ptep, pte_t if (pte_exec(orig)) vaddr |= 0x1UL; - if (pte_dirty(orig)) { + if (tlb_type != hypervisor && + pte_dirty(orig)) { unsigned long paddr, pfn = pte_pfn(orig); struct address_space *mapping; struct page *page; -- cgit v1.2.3-18-g5258 From 6889331a1260e42b0275f42c13d6342d6cc1a03d Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 26 Feb 2006 23:09:37 -0800 Subject: [SPARC64]: Fix indexing into kpte_linear_bitmap. Need to shift back up by 3 bits to get 8-byte entry index. Signed-off-by: David S. Miller --- arch/sparc64/kernel/ktlb.S | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/sparc64/kernel/ktlb.S b/arch/sparc64/kernel/ktlb.S index efcf38b6e28..31da1e564c9 100644 --- a/arch/sparc64/kernel/ktlb.S +++ b/arch/sparc64/kernel/ktlb.S @@ -163,6 +163,7 @@ kvmap_dtlb_tsb4m_miss: /* Divide by 64 to get the offset into the bitmask. */ srlx %g5, 6, %g5 + sllx %g5, 3, %g5 /* kern_linear_pte_xor[((mask & bit) ? 1 : 0)] */ ldx [%g2 + %g5], %g2 -- cgit v1.2.3-18-g5258 From aac0aadf09b98ba36eab0bb02a560ebcb82ac39f Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 27 Feb 2006 17:56:51 -0800 Subject: [SPARC64]: Fix bugs in SMP TLB context version expiration handling. 1) We must flush the TLB, duh. 2) Even if the sw context was seen to be valid, the local cpu's hw context can be out of date, so reload it unconditionally. Signed-off-by: David S. Miller --- arch/sparc64/kernel/smp.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 5ff2483e70b..eb7c0f855ba 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -909,14 +909,18 @@ void smp_receive_signal_client(int irq, struct pt_regs *regs) */ mm = current->active_mm; if (likely(mm)) { - if (unlikely(!CTX_VALID(mm->context))) { - unsigned long flags; + unsigned long flags; - spin_lock_irqsave(&mm->context.lock, flags); + spin_lock_irqsave(&mm->context.lock, flags); + + if (unlikely(!CTX_VALID(mm->context))) get_new_mmu_context(mm); - load_secondary_context(mm); - spin_unlock_irqrestore(&mm->context.lock, flags); - } + + load_secondary_context(mm); + __flush_tlb_mm(CTX_HWBITS(mm->context), + SECONDARY_CONTEXT); + + spin_unlock_irqrestore(&mm->context.lock, flags); } } -- cgit v1.2.3-18-g5258 From b830ab665ad96c6b20d51a89b35cbc09ab5a2c29 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 28 Feb 2006 15:10:26 -0800 Subject: [SPARC64]: Fix bugs in SUN4V cpu mondo dispatch. There were several bugs in the SUN4V cpu mondo dispatch code. In fact, if we ever got a EWOULDBLOCK or other error from the hypervisor call, we'd potentially send a cpu mondo multiple times to the same cpu and even worse we could loop until the timeout resending the same mondo over and over to such cpus. So let's bulletproof this thing as follows: 1) Implement cpu_mondo_send() and cpu_state() hypervisor calls in arch/sparc64/kernel/entry.S, add prototypes to asm/hypervisor.h 2) Don't build and update the cpulist using inline functions, this was causing the cpu mask to not get updated in the caller. 3) Disable interrupts during the entire mondo send, otherwise our cpu list and/or mondo block could get overwritten if we take an interrupt and do a cpu mondo send on the current cpu. 4) Check for all possible error return types from the cpu_mondo_send() hypervisor call. In particular: HV_EOK) Our work is done, all cpus have received the mondo. HV_CPUERROR) One or more of the cpus in the cpu list we passed to the hypervisor are in error state. Use cpu_state() calls over the entries in the cpu list to see which ones. Record them in "error_mask" and report this after we are done sending the mondo to cpus which are not in error state. HV_EWOULDBLOCK) We need to keep trying. Any other error we consider fatal, we report the event and exit immediately. 5) We only timeout if forward progress is not made. Forward progress is defined as having at least one cpu get the mondo successfully in a given cpu_mondo_send() call. Otherwise we bump a counter and delay a little. If the counter hits a limit, we signal an error and report the event. Also, smp_call_function_mask() error handling reports the number of cpus incorrectly. Signed-off-by: David S. Miller --- arch/sparc64/kernel/entry.S | 28 +++++++ arch/sparc64/kernel/smp.c | 180 ++++++++++++++++++++++++++++++-------------- 2 files changed, 151 insertions(+), 57 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S index 9f3048e64e8..6d0b3ed77a0 100644 --- a/arch/sparc64/kernel/entry.S +++ b/arch/sparc64/kernel/entry.S @@ -1795,3 +1795,31 @@ sun4v_cpu_yield: ta HV_FAST_TRAP retl nop + + /* %o0: num cpus in cpu list + * %o1: cpu list paddr + * %o2: mondo block paddr + * + * returns %o0: status + */ + .globl sun4v_cpu_mondo_send +sun4v_cpu_mondo_send: + mov HV_FAST_CPU_MONDO_SEND, %o5 + ta HV_FAST_TRAP + retl + nop + + /* %o0: CPU ID + * + * returns %o0: -status if status non-zero, else + * %o0: cpu state as HV_CPU_STATE_* + */ + .globl sun4v_cpu_state +sun4v_cpu_state: + mov HV_FAST_CPU_STATE, %o5 + ta HV_FAST_TRAP + brnz,pn %o0, 1f + sub %g0, %o0, %o0 + mov %o1, %o0 +1: retl + nop diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index eb7c0f855ba..6bc7fd47e44 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -556,77 +556,144 @@ retry: } /* Multi-cpu list version. */ -static int init_cpu_list(u16 *list, cpumask_t mask) -{ - int i, cnt; - - cnt = 0; - for_each_cpu_mask(i, mask) - list[cnt++] = i; - - return cnt; -} - -static int update_cpu_list(u16 *list, int orig_cnt, cpumask_t mask) -{ - int i; - - for (i = 0; i < orig_cnt; i++) { - if (list[i] == 0xffff) - cpu_clear(i, mask); - } - - return init_cpu_list(list, mask); -} - static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mask) { - int this_cpu = get_cpu(); - struct trap_per_cpu *tb = &trap_block[this_cpu]; - u64 *mondo = __va(tb->cpu_mondo_block_pa); - u16 *cpu_list = __va(tb->cpu_list_pa); - int cnt, retries; + struct trap_per_cpu *tb; + u16 *cpu_list; + u64 *mondo; + cpumask_t error_mask; + unsigned long flags, status; + int cnt, retries, this_cpu, i; + + /* We have to do this whole thing with interrupts fully disabled. + * Otherwise if we send an xcall from interrupt context it will + * corrupt both our mondo block and cpu list state. + * + * One consequence of this is that we cannot use timeout mechanisms + * that depend upon interrupts being delivered locally. So, for + * example, we cannot sample jiffies and expect it to advance. + * + * Fortunately, udelay() uses %stick/%tick so we can use that. + */ + local_irq_save(flags); + + this_cpu = smp_processor_id(); + tb = &trap_block[this_cpu]; + mondo = __va(tb->cpu_mondo_block_pa); mondo[0] = data0; mondo[1] = data1; mondo[2] = data2; wmb(); + cpu_list = __va(tb->cpu_list_pa); + + /* Setup the initial cpu list. */ + cnt = 0; + for_each_cpu_mask(i, mask) + cpu_list[cnt++] = i; + + cpus_clear(error_mask); retries = 0; - cnt = init_cpu_list(cpu_list, mask); do { - register unsigned long func __asm__("%o5"); - register unsigned long arg0 __asm__("%o0"); - register unsigned long arg1 __asm__("%o1"); - register unsigned long arg2 __asm__("%o2"); - - func = HV_FAST_CPU_MONDO_SEND; - arg0 = cnt; - arg1 = tb->cpu_list_pa; - arg2 = tb->cpu_mondo_block_pa; - - __asm__ __volatile__("ta %8" - : "=&r" (func), "=&r" (arg0), - "=&r" (arg1), "=&r" (arg2) - : "0" (func), "1" (arg0), - "2" (arg1), "3" (arg2), - "i" (HV_FAST_TRAP) - : "memory"); - if (likely(arg0 == HV_EOK)) - break; + int forward_progress; + + status = sun4v_cpu_mondo_send(cnt, + tb->cpu_list_pa, + tb->cpu_mondo_block_pa); - if (unlikely(++retries > 100)) { - printk("CPU[%d]: sun4v mondo error %lu\n", - this_cpu, arg0); + /* HV_EOK means all cpus received the xcall, we're done. */ + if (likely(status == HV_EOK)) break; + + /* First, clear out all the cpus in the mask that were + * successfully sent to. The hypervisor indicates this + * by setting the cpu list entry of such cpus to 0xffff. + */ + forward_progress = 0; + for (i = 0; i < cnt; i++) { + if (cpu_list[i] == 0xffff) { + cpu_clear(i, mask); + forward_progress = 1; + } } - cnt = update_cpu_list(cpu_list, cnt, mask); + /* If we get a HV_ECPUERROR, then one or more of the cpus + * in the list are in error state. Use the cpu_state() + * hypervisor call to find out which cpus are in error state. + */ + if (unlikely(status == HV_ECPUERROR)) { + for (i = 0; i < cnt; i++) { + long err; + u16 cpu; + + cpu = cpu_list[i]; + if (cpu == 0xffff) + continue; + + err = sun4v_cpu_state(cpu); + if (err >= 0 && + err == HV_CPU_STATE_ERROR) { + cpu_clear(cpu, mask); + cpu_set(cpu, error_mask); + } + } + } else if (unlikely(status != HV_EWOULDBLOCK)) + goto fatal_mondo_error; + + /* Rebuild the cpu_list[] array and try again. */ + cnt = 0; + for_each_cpu_mask(i, mask) + cpu_list[cnt++] = i; - udelay(2 * cnt); + if (unlikely(!forward_progress)) { + if (unlikely(++retries > 10000)) + goto fatal_mondo_timeout; + + /* Delay a little bit to let other cpus catch up + * on their cpu mondo queue work. + */ + udelay(2 * cnt); + } } while (1); - put_cpu(); + local_irq_restore(flags); + + if (unlikely(!cpus_empty(error_mask))) + goto fatal_mondo_cpu_error; + + return; + +fatal_mondo_cpu_error: + printk(KERN_CRIT "CPU[%d]: SUN4V mondo cpu error, some target cpus " + "were in error state\n", + this_cpu); + printk(KERN_CRIT "CPU[%d]: Error mask [ ", this_cpu); + for_each_cpu_mask(i, error_mask) + printk("%d ", i); + printk("]\n"); + return; + +fatal_mondo_timeout: + local_irq_restore(flags); + printk(KERN_CRIT "CPU[%d]: SUN4V mondo timeout, no forward " + " progress after %d retries.\n", + this_cpu, retries); + goto dump_cpu_list_and_out; + +fatal_mondo_error: + local_irq_restore(flags); + printk(KERN_CRIT "CPU[%d]: Unexpected SUN4V mondo error %lu\n", + this_cpu, status); + printk(KERN_CRIT "CPU[%d]: Args were cnt(%d) cpulist_pa(%lx) " + "mondo_block_pa(%lx)\n", + this_cpu, cnt, tb->cpu_list_pa, tb->cpu_mondo_block_pa); + +dump_cpu_list_and_out: + printk(KERN_CRIT "CPU[%d]: CPU list [ ", this_cpu); + for (i = 0; i < cnt; i++) + printk("%u ", cpu_list[i]); + printk("]\n"); } /* Send cross call to all processors mentioned in MASK @@ -723,9 +790,8 @@ static int smp_call_function_mask(void (*func)(void *info), void *info, out_timeout: spin_unlock(&call_lock); - printk("XCALL: Remote cpus not responding, ncpus=%ld finished=%ld\n", - (long) num_online_cpus() - 1L, - (long) atomic_read(&data.finished)); + printk("XCALL: Remote cpus not responding, ncpus=%d finished=%d\n", + cpus, atomic_read(&data.finished)); return 0; } -- cgit v1.2.3-18-g5258 From 8ba706a95bb92c3b14b812f6d507890336d19136 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 1 Mar 2006 17:32:46 -0800 Subject: [SPARC64]: Add mini-RTC driver for Starfire and SUN4V. Signed-off-by: David S. Miller --- arch/sparc64/kernel/time.c | 279 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 279 insertions(+) (limited to 'arch') diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c index f6275adbc81..d50ebeae144 100644 --- a/arch/sparc64/kernel/time.c +++ b/arch/sparc64/kernel/time.c @@ -30,6 +30,8 @@ #include #include #include +#include +#include #include #include @@ -45,6 +47,7 @@ #include #include #include +#include DEFINE_SPINLOCK(mostek_lock); DEFINE_SPINLOCK(rtc_lock); @@ -702,6 +705,14 @@ static u32 starfire_get_time(void) return unix_tod; } +static int starfire_set_time(u32 val) +{ + /* Do nothing, time is set using the service processor + * console on this platform. + */ + return 0; +} + static u32 hypervisor_get_time(void) { register unsigned long func asm("%o5"); @@ -731,6 +742,33 @@ retry: return 0; } +static int hypervisor_set_time(u32 secs) +{ + register unsigned long func asm("%o5"); + register unsigned long arg0 asm("%o0"); + int retries = 10000; + +retry: + func = HV_FAST_TOD_SET; + arg0 = secs; + __asm__ __volatile__("ta %4" + : "=&r" (func), "=&r" (arg0) + : "0" (func), "1" (arg0), + "i" (HV_FAST_TRAP)); + if (arg0 == HV_EOK) + return 0; + if (arg0 == HV_EWOULDBLOCK) { + if (--retries > 0) { + udelay(100); + goto retry; + } + printk(KERN_WARNING "SUN4V: tod_set() timed out.\n"); + return -EAGAIN; + } + printk(KERN_WARNING "SUN4V: tod_set() not supported.\n"); + return -EOPNOTSUPP; +} + void __init clock_probe(void) { struct linux_prom_registers clk_reg[2]; @@ -1221,3 +1259,244 @@ static int set_rtc_mmss(unsigned long nowtime) return retval; } } + +#define RTC_IS_OPEN 0x01 /* means /dev/rtc is in use */ +static unsigned char mini_rtc_status; /* bitmapped status byte. */ + +/* months start at 0 now */ +static unsigned char days_in_mo[] = +{31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}; + +#define FEBRUARY 2 +#define STARTOFTIME 1970 +#define SECDAY 86400L +#define SECYR (SECDAY * 365) +#define leapyear(year) ((year) % 4 == 0 && \ + ((year) % 100 != 0 || (year) % 400 == 0)) +#define days_in_year(a) (leapyear(a) ? 366 : 365) +#define days_in_month(a) (month_days[(a) - 1]) + +static int month_days[12] = { + 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 +}; + +/* + * This only works for the Gregorian calendar - i.e. after 1752 (in the UK) + */ +static void GregorianDay(struct rtc_time * tm) +{ + int leapsToDate; + int lastYear; + int day; + int MonthOffset[] = { 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334 }; + + lastYear = tm->tm_year - 1; + + /* + * Number of leap corrections to apply up to end of last year + */ + leapsToDate = lastYear / 4 - lastYear / 100 + lastYear / 400; + + /* + * This year is a leap year if it is divisible by 4 except when it is + * divisible by 100 unless it is divisible by 400 + * + * e.g. 1904 was a leap year, 1900 was not, 1996 is, and 2000 was + */ + day = tm->tm_mon > 2 && leapyear(tm->tm_year); + + day += lastYear*365 + leapsToDate + MonthOffset[tm->tm_mon-1] + + tm->tm_mday; + + tm->tm_wday = day % 7; +} + +static void to_tm(int tim, struct rtc_time *tm) +{ + register int i; + register long hms, day; + + day = tim / SECDAY; + hms = tim % SECDAY; + + /* Hours, minutes, seconds are easy */ + tm->tm_hour = hms / 3600; + tm->tm_min = (hms % 3600) / 60; + tm->tm_sec = (hms % 3600) % 60; + + /* Number of years in days */ + for (i = STARTOFTIME; day >= days_in_year(i); i++) + day -= days_in_year(i); + tm->tm_year = i; + + /* Number of months in days left */ + if (leapyear(tm->tm_year)) + days_in_month(FEBRUARY) = 29; + for (i = 1; day >= days_in_month(i); i++) + day -= days_in_month(i); + days_in_month(FEBRUARY) = 28; + tm->tm_mon = i; + + /* Days are what is left over (+1) from all that. */ + tm->tm_mday = day + 1; + + /* + * Determine the day of week + */ + GregorianDay(tm); +} + +/* Both Starfire and SUN4V give us seconds since Jan 1st, 1970, + * aka Unix time. So we have to convert to/from rtc_time. + */ +static inline void mini_get_rtc_time(struct rtc_time *time) +{ + unsigned long flags; + u32 seconds; + + spin_lock_irqsave(&rtc_lock, flags); + seconds = 0; + if (this_is_starfire) + seconds = starfire_get_time(); + else if (tlb_type == hypervisor) + seconds = hypervisor_get_time(); + spin_unlock_irqrestore(&rtc_lock, flags); + + to_tm(seconds, time); +} + +static inline int mini_set_rtc_time(struct rtc_time *time) +{ + u32 seconds = mktime(time->tm_year + 1900, time->tm_mon + 1, + time->tm_mday, time->tm_hour, + time->tm_min, time->tm_sec); + unsigned long flags; + int err; + + spin_lock_irqsave(&rtc_lock, flags); + err = -ENODEV; + if (this_is_starfire) + err = starfire_set_time(seconds); + else if (tlb_type == hypervisor) + err = hypervisor_set_time(seconds); + spin_unlock_irqrestore(&rtc_lock, flags); + + return err; +} + +static int mini_rtc_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct rtc_time wtime; + void __user *argp = (void __user *)arg; + + switch (cmd) { + + case RTC_PLL_GET: + return -EINVAL; + + case RTC_PLL_SET: + return -EINVAL; + + case RTC_UIE_OFF: /* disable ints from RTC updates. */ + return 0; + + case RTC_UIE_ON: /* enable ints for RTC updates. */ + return -EINVAL; + + case RTC_RD_TIME: /* Read the time/date from RTC */ + /* this doesn't get week-day, who cares */ + memset(&wtime, 0, sizeof(wtime)); + mini_get_rtc_time(&wtime); + + return copy_to_user(argp, &wtime, sizeof(wtime)) ? -EFAULT : 0; + + case RTC_SET_TIME: /* Set the RTC */ + { + int year; + unsigned char leap_yr; + + if (!capable(CAP_SYS_TIME)) + return -EACCES; + + if (copy_from_user(&wtime, argp, sizeof(wtime))) + return -EFAULT; + + year = wtime.tm_year + 1900; + leap_yr = ((!(year % 4) && (year % 100)) || + !(year % 400)); + + if ((wtime.tm_mon < 0 || wtime.tm_mon > 11) || (wtime.tm_mday < 1)) + return -EINVAL; + + if (wtime.tm_mday < 0 || wtime.tm_mday > + (days_in_mo[wtime.tm_mon] + ((wtime.tm_mon == 1) && leap_yr))) + return -EINVAL; + + if (wtime.tm_hour < 0 || wtime.tm_hour >= 24 || + wtime.tm_min < 0 || wtime.tm_min >= 60 || + wtime.tm_sec < 0 || wtime.tm_sec >= 60) + return -EINVAL; + + return mini_set_rtc_time(&wtime); + } + } + + return -EINVAL; +} + +static int mini_rtc_open(struct inode *inode, struct file *file) +{ + if (mini_rtc_status & RTC_IS_OPEN) + return -EBUSY; + + mini_rtc_status |= RTC_IS_OPEN; + + return 0; +} + +static int mini_rtc_release(struct inode *inode, struct file *file) +{ + mini_rtc_status &= ~RTC_IS_OPEN; + return 0; +} + + +static struct file_operations mini_rtc_fops = { + .owner = THIS_MODULE, + .ioctl = mini_rtc_ioctl, + .open = mini_rtc_open, + .release = mini_rtc_release, +}; + +static struct miscdevice rtc_mini_dev = +{ + .minor = RTC_MINOR, + .name = "rtc", + .fops = &mini_rtc_fops, +}; + +static int __init rtc_mini_init(void) +{ + int retval; + + if (tlb_type != hypervisor && !this_is_starfire) + return -ENODEV; + + printk(KERN_INFO "Mini RTC Driver\n"); + + retval = misc_register(&rtc_mini_dev); + if (retval < 0) + return retval; + + return 0; +} + +static void __exit rtc_mini_exit(void) +{ + misc_deregister(&rtc_mini_dev); +} + + +module_init(rtc_mini_init); +module_exit(rtc_mini_exit); -- cgit v1.2.3-18-g5258 From 92daa77e9a829350fd3900ff58d9c69820ad0e3d Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 1 Mar 2006 22:27:09 -0800 Subject: [SPARC64]: Fix typo in SUN4V D-TLB miss handler. Should put FAULT_CODE_DTLB into %g3 not FAULT_CODE_ITLB. Signed-off-by: David S. Miller --- arch/sparc64/kernel/sun4v_tlb_miss.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/sun4v_tlb_miss.S b/arch/sparc64/kernel/sun4v_tlb_miss.S index 654244a3b04..3dccbd67818 100644 --- a/arch/sparc64/kernel/sun4v_tlb_miss.S +++ b/arch/sparc64/kernel/sun4v_tlb_miss.S @@ -107,7 +107,7 @@ sun4v_dtlb_miss: ldda [%g1] ASI_QUAD_LDD_PHYS_4V, %g2 cmp %g2, %g6 bne,a,pn %xcc, tsb_miss_page_table_walk - mov FAULT_CODE_ITLB, %g3 + mov FAULT_CODE_DTLB, %g3 /* We have a valid entry, make hypervisor call to load * D-TLB and return from trap. -- cgit v1.2.3-18-g5258 From 45f791eb0f03e760183d30d3f1f18dc2b8e902fe Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 1 Mar 2006 22:42:18 -0800 Subject: [SPARC64]: Fix _PAGE_EXEC handling. First of all, use the known _PAGE_EXEC_{4U,4V} value instead of loading _PAGE_EXEC from memory. We either know which one to use by context, or we can code patch the test. Next, we need to check executability of a PTE in the generic TSB miss handler. Signed-off-by: David S. Miller --- arch/sparc64/kernel/itlb_miss.S | 10 +++++----- arch/sparc64/kernel/sun4v_tlb_miss.S | 4 +--- arch/sparc64/kernel/tsb.S | 9 +++++++++ 3 files changed, 15 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/itlb_miss.S b/arch/sparc64/kernel/itlb_miss.S index 6dfe3968c37..ad46e2024f4 100644 --- a/arch/sparc64/kernel/itlb_miss.S +++ b/arch/sparc64/kernel/itlb_miss.S @@ -9,18 +9,18 @@ cmp %g4, %g6 ! Compare TAG /* ITLB ** ICACHE line 2: TSB compare and TLB load */ - sethi %hi(PAGE_EXEC), %g4 ! Setup exec check - ldx [%g4 + %lo(PAGE_EXEC)], %g4 bne,pn %xcc, tsb_miss_itlb ! Miss mov FAULT_CODE_ITLB, %g3 - andcc %g5, %g4, %g0 ! Executable? + andcc %g5, _PAGE_EXEC_4U, %g0 ! Executable? be,pn %xcc, tsb_do_fault nop ! Delay slot, fill me + stxa %g5, [%g0] ASI_ITLB_DATA_IN ! Load TLB + retry ! Trap done nop /* ITLB ** ICACHE line 3: */ - stxa %g5, [%g0] ASI_ITLB_DATA_IN ! Load TLB - retry ! Trap done + nop + nop nop nop nop diff --git a/arch/sparc64/kernel/sun4v_tlb_miss.S b/arch/sparc64/kernel/sun4v_tlb_miss.S index 3dccbd67818..3eed8db9684 100644 --- a/arch/sparc64/kernel/sun4v_tlb_miss.S +++ b/arch/sparc64/kernel/sun4v_tlb_miss.S @@ -58,11 +58,9 @@ sun4v_itlb_miss: /* Load TSB tag/pte into %g2/%g3 and compare the tag. */ ldda [%g1] ASI_QUAD_LDD_PHYS_4V, %g2 cmp %g2, %g6 - sethi %hi(PAGE_EXEC), %g7 - ldx [%g7 + %lo(PAGE_EXEC)], %g7 bne,a,pn %xcc, tsb_miss_page_table_walk mov FAULT_CODE_ITLB, %g3 - andcc %g3, %g7, %g0 + andcc %g3, _PAGE_EXEC_4V, %g0 be,a,pn %xcc, tsb_do_fault mov FAULT_CODE_ITLB, %g3 diff --git a/arch/sparc64/kernel/tsb.S b/arch/sparc64/kernel/tsb.S index cc225c0563c..563852bf359 100644 --- a/arch/sparc64/kernel/tsb.S +++ b/arch/sparc64/kernel/tsb.S @@ -103,6 +103,15 @@ tsb_dtlb_load: mov %g5, %g3 tsb_itlb_load: + /* Executable bit must be set. */ +661: andcc %g5, _PAGE_EXEC_4U, %g0 + .section .sun4v_1insn_patch, "ax" + .word 661b + andcc %g5, _PAGE_EXEC_4V, %g0 + .previous + + be,pn %xcc, tsb_do_fault + nop 661: stxa %g5, [%g0] ASI_ITLB_DATA_IN retry -- cgit v1.2.3-18-g5258 From 8bcd17411643beb9a601e032d0cf1016909a81d3 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 2 Mar 2006 18:12:27 -0800 Subject: [SPARC64]: Do not allow mapping pages within 4GB of 64-bit VA hole. The UltraSPARC T1 manual recommends this because the chip could instruction prefetch into the VA hole, and this would also make decoding certain kinds of memory access traps more difficult (because the chip sign extends certain pieces of trap state). Signed-off-by: David S. Miller --- arch/sparc64/kernel/sys_sparc.c | 90 +++++++++++++++++++++++++++++++---------- 1 file changed, 68 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/sys_sparc.c b/arch/sparc64/kernel/sys_sparc.c index 5f8c822a2b4..095db723bb8 100644 --- a/arch/sparc64/kernel/sys_sparc.c +++ b/arch/sparc64/kernel/sys_sparc.c @@ -33,14 +33,55 @@ /* #define DEBUG_UNIMP_SYSCALL */ -/* XXX Make this per-binary type, this way we can detect the type of - * XXX a binary. Every Sparc executable calls this very early on. - */ asmlinkage unsigned long sys_getpagesize(void) { return PAGE_SIZE; } +#define VA_EXCLUDE_START (0x0000080000000000UL - (1UL << 32UL)) +#define VA_EXCLUDE_END (0xfffff80000000000UL + (1UL << 32UL)) + +/* Does addr --> addr+len fall within 4GB of the VA-space hole or + * overflow past the end of the 64-bit address space? + */ +static inline int invalid_64bit_range(unsigned long addr, unsigned long len) +{ + unsigned long va_exclude_start, va_exclude_end; + + va_exclude_start = VA_EXCLUDE_START; + va_exclude_end = VA_EXCLUDE_END; + + if (unlikely(len >= va_exclude_start)) + return 1; + + if (unlikely((addr + len) < addr)) + return 1; + + if (unlikely((addr >= va_exclude_start && addr < va_exclude_end) || + ((addr + len) >= va_exclude_start && + (addr + len) < va_exclude_end))) + return 1; + + return 0; +} + +/* Does start,end straddle the VA-space hole? */ +static inline int straddles_64bit_va_hole(unsigned long start, unsigned long end) +{ + unsigned long va_exclude_start, va_exclude_end; + + va_exclude_start = VA_EXCLUDE_START; + va_exclude_end = VA_EXCLUDE_END; + + if (likely(start < va_exclude_start && end < va_exclude_start)) + return 0; + + if (likely(start >= va_exclude_end && end >= va_exclude_end)) + return 0; + + return 1; +} + #define COLOUR_ALIGN(addr,pgoff) \ ((((addr)+SHMLBA-1)&~(SHMLBA-1)) + \ (((pgoff)< task_size || len > -PAGE_OFFSET) + if (len > task_size || len >= VA_EXCLUDE_START) return -ENOMEM; do_color_align = 0; @@ -100,9 +141,10 @@ full_search: for (vma = find_vma(mm, addr); ; vma = vma->vm_next) { /* At this point: (!vma || addr < vma->vm_end). */ - if (addr < PAGE_OFFSET && -PAGE_OFFSET - len < addr) { - addr = PAGE_OFFSET; - vma = find_vma(mm, PAGE_OFFSET); + if (addr < VA_EXCLUDE_START && + (addr + len) >= VA_EXCLUDE_START) { + addr = VA_EXCLUDE_END; + vma = find_vma(mm, VA_EXCLUDE_END); } if (task_size < addr) { if (start_addr != TASK_UNMAPPED_BASE) { @@ -174,12 +216,12 @@ unsigned long get_fb_unmapped_area(struct file *filp, unsigned long orig_addr, u asmlinkage unsigned long sparc_brk(unsigned long brk) { /* People could try to be nasty and use ta 0x6d in 32bit programs */ - if (test_thread_flag(TIF_32BIT) && - brk >= 0xf0000000UL) + if (test_thread_flag(TIF_32BIT) && brk >= 0xf0000000UL) return current->mm->brk; - if ((current->mm->brk & PAGE_OFFSET) != (brk & PAGE_OFFSET)) + if (unlikely(straddles_64bit_va_hole(current->mm->brk, brk))) return current->mm->brk; + return sys_brk(brk); } @@ -340,13 +382,16 @@ asmlinkage unsigned long sys_mmap(unsigned long addr, unsigned long len, retval = -EINVAL; if (test_thread_flag(TIF_32BIT)) { - if (len > 0xf0000000UL || - ((flags & MAP_FIXED) && addr > 0xf0000000UL - len)) + if (len >= 0xf0000000UL) + goto out_putf; + + if ((flags & MAP_FIXED) && addr > 0xf0000000UL - len) goto out_putf; } else { - if (len > -PAGE_OFFSET || - ((flags & MAP_FIXED) && - addr < PAGE_OFFSET && addr + len > -PAGE_OFFSET)) + if (len >= VA_EXCLUDE_START) + goto out_putf; + + if ((flags & MAP_FIXED) && invalid_64bit_range(addr, len)) goto out_putf; } @@ -365,9 +410,9 @@ asmlinkage long sys64_munmap(unsigned long addr, size_t len) { long ret; - if (len > -PAGE_OFFSET || - (addr < PAGE_OFFSET && addr + len > -PAGE_OFFSET)) + if (invalid_64bit_range(addr, len)) return -EINVAL; + down_write(¤t->mm->mmap_sem); ret = do_munmap(current->mm, addr, len); up_write(¤t->mm->mmap_sem); @@ -384,18 +429,19 @@ asmlinkage unsigned long sys64_mremap(unsigned long addr, { struct vm_area_struct *vma; unsigned long ret = -EINVAL; + if (test_thread_flag(TIF_32BIT)) goto out; - if (old_len > -PAGE_OFFSET || new_len > -PAGE_OFFSET) + if (unlikely(new_len >= VA_EXCLUDE_START)) goto out; - if (addr < PAGE_OFFSET && addr + old_len > -PAGE_OFFSET) + if (unlikely(invalid_64bit_range(addr, old_len))) goto out; + down_write(¤t->mm->mmap_sem); if (flags & MREMAP_FIXED) { - if (new_addr < PAGE_OFFSET && - new_addr + new_len > -PAGE_OFFSET) + if (invalid_64bit_range(new_addr, new_len)) goto out_sem; - } else if (addr < PAGE_OFFSET && addr + new_len > -PAGE_OFFSET) { + } else if (invalid_64bit_range(addr, new_len)) { unsigned long map_flags = 0; struct file *file = NULL; -- cgit v1.2.3-18-g5258 From c4f8ef77f941e7d89a52fad1fbe04d59397e2bd1 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 2 Mar 2006 20:28:34 -0800 Subject: [SPARC64]: Fix mini RTC driver reading. Need to subtract 1900 from year and 1 from month before giving it back to userspace. Signed-off-by: David S. Miller --- arch/sparc64/kernel/time.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c index d50ebeae144..7d61f1bfd3d 100644 --- a/arch/sparc64/kernel/time.c +++ b/arch/sparc64/kernel/time.c @@ -1363,6 +1363,8 @@ static inline void mini_get_rtc_time(struct rtc_time *time) spin_unlock_irqrestore(&rtc_lock, flags); to_tm(seconds, time); + time->tm_year -= 1900; + time->tm_mon -= 1; } static inline int mini_set_rtc_time(struct rtc_time *time) -- cgit v1.2.3-18-g5258 From bcc28ee0bf390df0d81cc9dafe980faef6b2771a Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 2 Mar 2006 20:42:53 -0800 Subject: [SPARC64]: Fix sun4v mna winfixup handling. We were clobbering a base register before we were done using it. Fix a comment typo while we're here. Signed-off-by: David S. Miller --- arch/sparc64/kernel/sun4v_tlb_miss.S | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/sun4v_tlb_miss.S b/arch/sparc64/kernel/sun4v_tlb_miss.S index 3eed8db9684..ab23ddb7116 100644 --- a/arch/sparc64/kernel/sun4v_tlb_miss.S +++ b/arch/sparc64/kernel/sun4v_tlb_miss.S @@ -18,7 +18,7 @@ /* DEST = (VADDR >> 22) * - * Branch to ZERO_CTX_LABEL is context is zero. + * Branch to ZERO_CTX_LABEL if context is zero. */ #define COMPUTE_TAG_TARGET(DEST, VADDR, CTX, ZERO_CTX_LABEL) \ srlx VADDR, 22, DEST; \ @@ -314,10 +314,10 @@ sun4v_mna: nop SET_GL(1) - ldxa [%g0] ASI_SCRATCHPAD, %g5 - ldx [%g5 + HV_FAULT_D_ADDR_OFFSET], %g5 + ldxa [%g0] ASI_SCRATCHPAD, %g2 + ldx [%g2 + HV_FAULT_D_ADDR_OFFSET], %g5 mov HV_FAULT_TYPE_UNALIGNED, %g3 - ldx [%g5 + HV_FAULT_D_CTX_OFFSET], %g4 + ldx [%g2 + HV_FAULT_D_CTX_OFFSET], %g4 sllx %g3, 16, %g3 or %g4, %g3, %g4 ba,pt %xcc, winfix_mna -- cgit v1.2.3-18-g5258 From 3cab0c3e8636d5005041aa52224f796c3a4ef872 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 2 Mar 2006 21:50:47 -0800 Subject: [SPARC64]: More SUN4V cpu mondo bug fixing. This cpu mondo sending interface isn't all that easy to use correctly... We were clearing out the wrong bits from the "mask" after getting something other than EOK from the hypervisor. It turns out the hypervisor can just be resent the same cpu_list[] array, with the 0xffff "done" entries still in there, and it will do the right thing. So don't update or try to rebuild the cpu_list[] array to condense it. This requires the "forward_progress" check to be done slightly differently, but this new scheme is less bug prone than what we were doing before. Signed-off-by: David S. Miller --- arch/sparc64/kernel/smp.c | 40 ++++++++++++++++++++++++---------------- 1 file changed, 24 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 6bc7fd47e44..c4548a88953 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -563,7 +563,7 @@ static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t u64 *mondo; cpumask_t error_mask; unsigned long flags, status; - int cnt, retries, this_cpu, i; + int cnt, retries, this_cpu, prev_sent, i; /* We have to do this whole thing with interrupts fully disabled. * Otherwise if we send an xcall from interrupt context it will @@ -595,8 +595,9 @@ static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t cpus_clear(error_mask); retries = 0; + prev_sent = 0; do { - int forward_progress; + int forward_progress, n_sent; status = sun4v_cpu_mondo_send(cnt, tb->cpu_list_pa, @@ -606,18 +607,23 @@ static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t if (likely(status == HV_EOK)) break; - /* First, clear out all the cpus in the mask that were - * successfully sent to. The hypervisor indicates this - * by setting the cpu list entry of such cpus to 0xffff. + /* First, see if we made any forward progress. + * + * The hypervisor indicates successful sends by setting + * cpu list entries to the value 0xffff. */ - forward_progress = 0; + n_sent = 0; for (i = 0; i < cnt; i++) { - if (cpu_list[i] == 0xffff) { - cpu_clear(i, mask); - forward_progress = 1; - } + if (likely(cpu_list[i] == 0xffff)) + n_sent++; } + forward_progress = 0; + if (n_sent > prev_sent) + forward_progress = 1; + + prev_sent = n_sent; + /* If we get a HV_ECPUERROR, then one or more of the cpus * in the list are in error state. Use the cpu_state() * hypervisor call to find out which cpus are in error state. @@ -634,18 +640,20 @@ static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t err = sun4v_cpu_state(cpu); if (err >= 0 && err == HV_CPU_STATE_ERROR) { - cpu_clear(cpu, mask); + cpu_list[i] = 0xffff; cpu_set(cpu, error_mask); } } } else if (unlikely(status != HV_EWOULDBLOCK)) goto fatal_mondo_error; - /* Rebuild the cpu_list[] array and try again. */ - cnt = 0; - for_each_cpu_mask(i, mask) - cpu_list[cnt++] = i; - + /* Don't bother rewriting the CPU list, just leave the + * 0xffff and non-0xffff entries in there and the + * hypervisor will do the right thing. + * + * Only advance timeout state if we didn't make any + * forward progress. + */ if (unlikely(!forward_progress)) { if (unlikely(++retries > 10000)) goto fatal_mondo_timeout; -- cgit v1.2.3-18-g5258 From 74ae998772041b62e9ad420d602e4f7dbb182cd6 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 5 Mar 2006 18:26:24 -0800 Subject: [SPARC64]: Simplify TSB insert checks. Don't try to avoid putting non-base page sized entries into the user TSB. It actually costs us more to check this than it helps. Eventually we'll have a multiple TSB scheme for user processes. Once a process starts using larger pages, we'll allocate and use such a TSB. Signed-off-by: David S. Miller --- arch/sparc64/kernel/tsb.S | 14 -------------- arch/sparc64/mm/init.c | 15 ++++++--------- 2 files changed, 6 insertions(+), 23 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/tsb.S b/arch/sparc64/kernel/tsb.S index 563852bf359..d738910153f 100644 --- a/arch/sparc64/kernel/tsb.S +++ b/arch/sparc64/kernel/tsb.S @@ -55,20 +55,6 @@ tsb_reload: brgez,a,pn %g5, tsb_do_fault TSB_STORE(%g1, %g7) - /* If it is larger than the base page size, don't - * bother putting it into the TSB. - */ - sethi %hi(_PAGE_ALL_SZ_BITS), %g7 - ldx [%g7 + %lo(_PAGE_ALL_SZ_BITS)], %g7 - and %g5, %g7, %g2 - sethi %hi(_PAGE_SZBITS), %g7 - ldx [%g7 + %lo(_PAGE_SZBITS)], %g7 - cmp %g2, %g7 - mov 1, %g7 - sllx %g7, TSB_TAG_INVALID_BIT, %g7 - bne,a,pn %xcc, tsb_tlb_reload - TSB_STORE(%g1, %g7) - TSB_WRITE(%g1, %g5, %g6) /* Finally, load TLB and return from trap. */ diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 87d5d1af1ad..5930e87dafb 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -280,6 +280,8 @@ unsigned long _PAGE_SZBITS __read_mostly; void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte) { struct mm_struct *mm; + struct tsb *tsb; + unsigned long tag; if (tlb_type != hypervisor) { unsigned long pfn = pte_pfn(pte); @@ -308,15 +310,10 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t p } mm = vma->vm_mm; - if ((pte_val(pte) & _PAGE_ALL_SZ_BITS) == _PAGE_SZBITS) { - struct tsb *tsb; - unsigned long tag; - - tsb = &mm->context.tsb[(address >> PAGE_SHIFT) & - (mm->context.tsb_nentries - 1UL)]; - tag = (address >> 22UL); - tsb_insert(tsb, tag, pte_val(pte)); - } + tsb = &mm->context.tsb[(address >> PAGE_SHIFT) & + (mm->context.tsb_nentries - 1UL)]; + tag = (address >> 22UL); + tsb_insert(tsb, tag, pte_val(pte)); } void flush_dcache_page(struct page *page) -- cgit v1.2.3-18-g5258 From f7c00338cfeef125032aa12aa8ebeacf9e117e81 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 5 Mar 2006 22:18:50 -0800 Subject: [SPARC64]: Fix loop termination in mark_kpte_bitmap() If we were aligned, but didn't have at least 256MB left to process, we would loop forever. Thanks to fabbione for the report and testing the fix. Signed-off-by: David S. Miller --- arch/sparc64/mm/init.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 5930e87dafb..9bbd0bf64af 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -973,12 +973,15 @@ static void __init mark_kpte_bitmap(unsigned long start, unsigned long end) while (start < end) { long remains; + remains = end - start; + if (remains < size_256MB) + break; + if (start & mask_256MB) { start = (start + size_256MB) & ~mask_256MB; continue; } - remains = end - start; while (remains >= size_256MB) { unsigned long index = start >> shift_256MB; -- cgit v1.2.3-18-g5258 From 9132983ae140a8ca81e95e081d5a4c0dd7a7f670 Mon Sep 17 00:00:00 2001 From: Eric Sesterhenn Date: Mon, 6 Mar 2006 13:48:40 -0800 Subject: [SPARC64]: kzalloc() conversion this patch converts arch/sparc64 to kzalloc usage. Crosscompile tested with allyesconfig. Signed-off-by: Eric Sesterhenn Signed-off-by: David S. Miller --- arch/sparc64/kernel/ebus.c | 3 +-- arch/sparc64/kernel/irq.c | 6 ++---- arch/sparc64/kernel/pci_common.c | 9 +++------ arch/sparc64/kernel/pci_iommu.c | 3 +-- arch/sparc64/kernel/pci_psycho.c | 9 +++------ arch/sparc64/kernel/pci_sabre.c | 9 +++------ arch/sparc64/kernel/pci_schizo.c | 12 ++++-------- arch/sparc64/kernel/setup.c | 14 +++++--------- arch/sparc64/kernel/sys_sparc.c | 4 +--- arch/sparc64/kernel/us2e_cpufreq.c | 8 ++------ arch/sparc64/kernel/us3_cpufreq.c | 8 ++------ 11 files changed, 27 insertions(+), 58 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/ebus.c b/arch/sparc64/kernel/ebus.c index 7991e919d8a..c69504aa638 100644 --- a/arch/sparc64/kernel/ebus.c +++ b/arch/sparc64/kernel/ebus.c @@ -277,10 +277,9 @@ static inline void *ebus_alloc(size_t size) { void *mem; - mem = kmalloc(size, GFP_ATOMIC); + mem = kzalloc(size, GFP_ATOMIC); if (!mem) panic("ebus_alloc: out of memory"); - memset((char *)mem, 0, size); return mem; } diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index 712b16cdd5f..8c93ba655b3 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -316,12 +316,11 @@ unsigned int build_irq(int pil, int inofixup, unsigned long iclr, unsigned long goto out; } - bucket->irq_info = kmalloc(sizeof(struct irq_desc), GFP_ATOMIC); + bucket->irq_info = kzalloc(sizeof(struct irq_desc), GFP_ATOMIC); if (!bucket->irq_info) { prom_printf("IRQ: Error, kmalloc(irq_desc) failed.\n"); prom_halt(); } - memset(bucket->irq_info, 0, sizeof(struct irq_desc)); /* Ok, looks good, set it up. Don't touch the irq_chain or * the pending flag. @@ -357,12 +356,11 @@ unsigned int sun4v_build_irq(u32 devhandle, unsigned int devino, int pil, unsign bucket->pil = pil; bucket->flags = flags; - bucket->irq_info = kmalloc(sizeof(struct irq_desc), GFP_ATOMIC); + bucket->irq_info = kzalloc(sizeof(struct irq_desc), GFP_ATOMIC); if (!bucket->irq_info) { prom_printf("IRQ: Error, kmalloc(irq_desc) failed.\n"); prom_halt(); } - memset(bucket->irq_info, 0, sizeof(struct irq_desc)); return __irq(bucket); } diff --git a/arch/sparc64/kernel/pci_common.c b/arch/sparc64/kernel/pci_common.c index 1448294a237..33dedb1aacd 100644 --- a/arch/sparc64/kernel/pci_common.c +++ b/arch/sparc64/kernel/pci_common.c @@ -977,33 +977,30 @@ void pci_register_legacy_regions(struct resource *io_res, struct resource *p; /* VGA Video RAM. */ - p = kmalloc(sizeof(*p), GFP_KERNEL); + p = kzalloc(sizeof(*p), GFP_KERNEL); if (!p) return; - memset(p, 0, sizeof(*p)); p->name = "Video RAM area"; p->start = mem_res->start + 0xa0000UL; p->end = p->start + 0x1ffffUL; p->flags = IORESOURCE_BUSY; request_resource(mem_res, p); - p = kmalloc(sizeof(*p), GFP_KERNEL); + p = kzalloc(sizeof(*p), GFP_KERNEL); if (!p) return; - memset(p, 0, sizeof(*p)); p->name = "System ROM"; p->start = mem_res->start + 0xf0000UL; p->end = p->start + 0xffffUL; p->flags = IORESOURCE_BUSY; request_resource(mem_res, p); - p = kmalloc(sizeof(*p), GFP_KERNEL); + p = kzalloc(sizeof(*p), GFP_KERNEL); if (!p) return; - memset(p, 0, sizeof(*p)); p->name = "Video ROM"; p->start = mem_res->start + 0xc0000UL; p->end = p->start + 0x7fffUL; diff --git a/arch/sparc64/kernel/pci_iommu.c b/arch/sparc64/kernel/pci_iommu.c index c9320eac45d..8efbc139769 100644 --- a/arch/sparc64/kernel/pci_iommu.c +++ b/arch/sparc64/kernel/pci_iommu.c @@ -139,12 +139,11 @@ void pci_iommu_table_init(struct pci_iommu *iommu, int tsbsize, u32 dma_offset, /* Allocate and initialize the free area map. */ sz = num_tsb_entries / 8; sz = (sz + 7UL) & ~7UL; - iommu->arena.map = kmalloc(sz, GFP_KERNEL); + iommu->arena.map = kzalloc(sz, GFP_KERNEL); if (!iommu->arena.map) { prom_printf("PCI_IOMMU: Error, kmalloc(arena.map) failed.\n"); prom_halt(); } - memset(iommu->arena.map, 0, sz); iommu->arena.limit = num_tsb_entries; /* Allocate and initialize the dummy page which we diff --git a/arch/sparc64/kernel/pci_psycho.c b/arch/sparc64/kernel/pci_psycho.c index c03ed5f49d3..f7b16e49c28 100644 --- a/arch/sparc64/kernel/pci_psycho.c +++ b/arch/sparc64/kernel/pci_psycho.c @@ -1164,7 +1164,7 @@ static void pbm_config_busmastering(struct pci_pbm_info *pbm) static void pbm_scan_bus(struct pci_controller_info *p, struct pci_pbm_info *pbm) { - struct pcidev_cookie *cookie = kmalloc(sizeof(*cookie), GFP_KERNEL); + struct pcidev_cookie *cookie = kzalloc(sizeof(*cookie), GFP_KERNEL); if (!cookie) { prom_printf("PSYCHO: Critical allocation failure.\n"); @@ -1172,7 +1172,6 @@ static void pbm_scan_bus(struct pci_controller_info *p, } /* All we care about is the PBM. */ - memset(cookie, 0, sizeof(*cookie)); cookie->pbm = pbm; pbm->pci_bus = pci_scan_bus(pbm->pci_first_busno, @@ -1465,18 +1464,16 @@ void psycho_init(int node, char *model_name) } } - p = kmalloc(sizeof(struct pci_controller_info), GFP_ATOMIC); + p = kzalloc(sizeof(struct pci_controller_info), GFP_ATOMIC); if (!p) { prom_printf("PSYCHO: Fatal memory allocation error.\n"); prom_halt(); } - memset(p, 0, sizeof(*p)); - iommu = kmalloc(sizeof(struct pci_iommu), GFP_ATOMIC); + iommu = kzalloc(sizeof(struct pci_iommu), GFP_ATOMIC); if (!iommu) { prom_printf("PSYCHO: Fatal memory allocation error.\n"); prom_halt(); } - memset(iommu, 0, sizeof(*iommu)); p->pbm_A.iommu = p->pbm_B.iommu = iommu; p->next = pci_controller_root; diff --git a/arch/sparc64/kernel/pci_sabre.c b/arch/sparc64/kernel/pci_sabre.c index da8e1364194..5ddc9293197 100644 --- a/arch/sparc64/kernel/pci_sabre.c +++ b/arch/sparc64/kernel/pci_sabre.c @@ -1167,7 +1167,7 @@ static void apb_init(struct pci_controller_info *p, struct pci_bus *sabre_bus) static struct pcidev_cookie *alloc_bridge_cookie(struct pci_pbm_info *pbm) { - struct pcidev_cookie *cookie = kmalloc(sizeof(*cookie), GFP_KERNEL); + struct pcidev_cookie *cookie = kzalloc(sizeof(*cookie), GFP_KERNEL); if (!cookie) { prom_printf("SABRE: Critical allocation failure.\n"); @@ -1175,7 +1175,6 @@ static struct pcidev_cookie *alloc_bridge_cookie(struct pci_pbm_info *pbm) } /* All we care about is the PBM. */ - memset(cookie, 0, sizeof(*cookie)); cookie->pbm = pbm; return cookie; @@ -1556,19 +1555,17 @@ void sabre_init(int pnode, char *model_name) } } - p = kmalloc(sizeof(*p), GFP_ATOMIC); + p = kzalloc(sizeof(*p), GFP_ATOMIC); if (!p) { prom_printf("SABRE: Error, kmalloc(pci_controller_info) failed.\n"); prom_halt(); } - memset(p, 0, sizeof(*p)); - iommu = kmalloc(sizeof(*iommu), GFP_ATOMIC); + iommu = kzalloc(sizeof(*iommu), GFP_ATOMIC); if (!iommu) { prom_printf("SABRE: Error, kmalloc(pci_iommu) failed.\n"); prom_halt(); } - memset(iommu, 0, sizeof(*iommu)); p->pbm_A.iommu = p->pbm_B.iommu = iommu; upa_portid = prom_getintdefault(pnode, "upa-portid", 0xff); diff --git a/arch/sparc64/kernel/pci_schizo.c b/arch/sparc64/kernel/pci_schizo.c index d8c4e0919b4..3a89f29e27d 100644 --- a/arch/sparc64/kernel/pci_schizo.c +++ b/arch/sparc64/kernel/pci_schizo.c @@ -1525,7 +1525,7 @@ static void pbm_config_busmastering(struct pci_pbm_info *pbm) static void pbm_scan_bus(struct pci_controller_info *p, struct pci_pbm_info *pbm) { - struct pcidev_cookie *cookie = kmalloc(sizeof(*cookie), GFP_KERNEL); + struct pcidev_cookie *cookie = kzalloc(sizeof(*cookie), GFP_KERNEL); if (!cookie) { prom_printf("%s: Critical allocation failure.\n", pbm->name); @@ -1533,7 +1533,6 @@ static void pbm_scan_bus(struct pci_controller_info *p, } /* All we care about is the PBM. */ - memset(cookie, 0, sizeof(*cookie)); cookie->pbm = pbm; pbm->pci_bus = pci_scan_bus(pbm->pci_first_busno, @@ -2120,27 +2119,24 @@ static void __schizo_init(int node, char *model_name, int chip_type) } } - p = kmalloc(sizeof(struct pci_controller_info), GFP_ATOMIC); + p = kzalloc(sizeof(struct pci_controller_info), GFP_ATOMIC); if (!p) { prom_printf("SCHIZO: Fatal memory allocation error.\n"); prom_halt(); } - memset(p, 0, sizeof(*p)); - iommu = kmalloc(sizeof(struct pci_iommu), GFP_ATOMIC); + iommu = kzalloc(sizeof(struct pci_iommu), GFP_ATOMIC); if (!iommu) { prom_printf("SCHIZO: Fatal memory allocation error.\n"); prom_halt(); } - memset(iommu, 0, sizeof(*iommu)); p->pbm_A.iommu = iommu; - iommu = kmalloc(sizeof(struct pci_iommu), GFP_ATOMIC); + iommu = kzalloc(sizeof(struct pci_iommu), GFP_ATOMIC); if (!iommu) { prom_printf("SCHIZO: Fatal memory allocation error.\n"); prom_halt(); } - memset(iommu, 0, sizeof(*iommu)); p->pbm_B.iommu = iommu; p->next = pci_controller_root; diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index 0c68a76143a..2a2a8a6cd17 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -536,15 +536,11 @@ static int __init topology_init(void) while (!cpu_find_by_instance(ncpus_probed, NULL, NULL)) ncpus_probed++; - for (i = 0; i < NR_CPUS; i++) { - if (cpu_possible(i)) { - struct cpu *p = kmalloc(sizeof(*p), GFP_KERNEL); - - if (p) { - memset(p, 0, sizeof(*p)); - register_cpu(p, i, NULL); - err = 0; - } + for_each_cpu(i) { + struct cpu *p = kzalloc(sizeof(*p), GFP_KERNEL); + if (p) { + register_cpu(p, i, NULL); + err = 0; } } diff --git a/arch/sparc64/kernel/sys_sparc.c b/arch/sparc64/kernel/sys_sparc.c index 095db723bb8..8840415408b 100644 --- a/arch/sparc64/kernel/sys_sparc.c +++ b/arch/sparc64/kernel/sys_sparc.c @@ -600,12 +600,10 @@ asmlinkage long sys_utrap_install(utrap_entry_t type, } if (!current_thread_info()->utraps) { current_thread_info()->utraps = - kmalloc((UT_TRAP_INSTRUCTION_31+1)*sizeof(long), GFP_KERNEL); + kzalloc((UT_TRAP_INSTRUCTION_31+1)*sizeof(long), GFP_KERNEL); if (!current_thread_info()->utraps) return -ENOMEM; current_thread_info()->utraps[0] = 1; - memset(current_thread_info()->utraps+1, 0, - UT_TRAP_INSTRUCTION_31*sizeof(long)); } else { if ((utrap_handler_t)current_thread_info()->utraps[type] != new_p && current_thread_info()->utraps[0] > 1) { diff --git a/arch/sparc64/kernel/us2e_cpufreq.c b/arch/sparc64/kernel/us2e_cpufreq.c index 669fb83dd4f..1f83fe6a82d 100644 --- a/arch/sparc64/kernel/us2e_cpufreq.c +++ b/arch/sparc64/kernel/us2e_cpufreq.c @@ -357,20 +357,16 @@ static int __init us2e_freq_init(void) struct cpufreq_driver *driver; ret = -ENOMEM; - driver = kmalloc(sizeof(struct cpufreq_driver), GFP_KERNEL); + driver = kzalloc(sizeof(struct cpufreq_driver), GFP_KERNEL); if (!driver) goto err_out; - memset(driver, 0, sizeof(*driver)); - us2e_freq_table = kmalloc( + us2e_freq_table = kzalloc( (NR_CPUS * sizeof(struct us2e_freq_percpu_info)), GFP_KERNEL); if (!us2e_freq_table) goto err_out; - memset(us2e_freq_table, 0, - (NR_CPUS * sizeof(struct us2e_freq_percpu_info))); - driver->init = us2e_freq_cpu_init; driver->verify = us2e_freq_verify; driver->target = us2e_freq_target; diff --git a/arch/sparc64/kernel/us3_cpufreq.c b/arch/sparc64/kernel/us3_cpufreq.c index a912c45bdc0..47e3acafb5b 100644 --- a/arch/sparc64/kernel/us3_cpufreq.c +++ b/arch/sparc64/kernel/us3_cpufreq.c @@ -218,20 +218,16 @@ static int __init us3_freq_init(void) struct cpufreq_driver *driver; ret = -ENOMEM; - driver = kmalloc(sizeof(struct cpufreq_driver), GFP_KERNEL); + driver = kzalloc(sizeof(struct cpufreq_driver), GFP_KERNEL); if (!driver) goto err_out; - memset(driver, 0, sizeof(*driver)); - us3_freq_table = kmalloc( + us3_freq_table = kzalloc( (NR_CPUS * sizeof(struct us3_freq_percpu_info)), GFP_KERNEL); if (!us3_freq_table) goto err_out; - memset(us3_freq_table, 0, - (NR_CPUS * sizeof(struct us3_freq_percpu_info))); - driver->init = us3_freq_cpu_init; driver->verify = us3_freq_verify; driver->target = us3_freq_target; -- cgit v1.2.3-18-g5258 From a77754b4d0731321db266c6c60ffcd7c62757da5 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 6 Mar 2006 19:59:50 -0800 Subject: [SPARC64]: Bulletproof MMU context locking. 1) Always spin_lock_init() in init_context(). The caller essentially clears it out, or copies the mm info from the parent. In both cases we need to explicitly initialize the spinlock. 2) Always do explicit IRQ disabling while taking mm->context.lock and ctx_alloc_lock. Signed-off-by: David S. Miller --- arch/sparc64/mm/init.c | 5 +++-- arch/sparc64/mm/tsb.c | 1 + 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 9bbd0bf64af..a63939347b3 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -639,9 +639,10 @@ void get_new_mmu_context(struct mm_struct *mm) { unsigned long ctx, new_ctx; unsigned long orig_pgsz_bits; + unsigned long flags; int new_version; - spin_lock(&ctx_alloc_lock); + spin_lock_irqsave(&ctx_alloc_lock, flags); orig_pgsz_bits = (mm->context.sparc64_ctx_val & CTX_PGSZ_MASK); ctx = (tlb_context_cache + 1) & CTX_NR_MASK; new_ctx = find_next_zero_bit(mmu_context_bmap, 1 << CTX_NR_BITS, ctx); @@ -677,7 +678,7 @@ void get_new_mmu_context(struct mm_struct *mm) out: tlb_context_cache = new_ctx; mm->context.sparc64_ctx_val = new_ctx | orig_pgsz_bits; - spin_unlock(&ctx_alloc_lock); + spin_unlock_irqrestore(&ctx_alloc_lock, flags); if (unlikely(new_version)) smp_new_mmu_context_version(); diff --git a/arch/sparc64/mm/tsb.c b/arch/sparc64/mm/tsb.c index 534ac281989..f36799b7152 100644 --- a/arch/sparc64/mm/tsb.c +++ b/arch/sparc64/mm/tsb.c @@ -354,6 +354,7 @@ void tsb_grow(struct mm_struct *mm, unsigned long rss, gfp_t gfp_flags) int init_new_context(struct task_struct *tsk, struct mm_struct *mm) { + spin_lock_init(&mm->context.lock); mm->context.sparc64_ctx_val = 0UL; -- cgit v1.2.3-18-g5258 From ee29074d3bd23848905f52c515974e0cd0219faa Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 6 Mar 2006 22:50:44 -0800 Subject: [SPARC64]: Fix new context version SMP handling. Don't piggy back the SMP receive signal code to do the context version change handling. Instead allocate another fixed PIL number for this asynchronous cross-call. We can't use smp_call_function() because this thing is invoked with interrupts disabled and a few spinlocks held. Also, fix smp_call_function_mask() to count "cpus" correctly. There is no guarentee that the local cpu is in the mask yet that is exactly what this code was assuming. Signed-off-by: David S. Miller --- arch/sparc64/kernel/devices.c | 2 +- arch/sparc64/kernel/pci_psycho.c | 14 +++++++------- arch/sparc64/kernel/pci_sabre.c | 14 +++++++------- arch/sparc64/kernel/pci_schizo.c | 12 ++++++------ arch/sparc64/kernel/pci_sun4v.c | 6 +++--- arch/sparc64/kernel/sbus.c | 10 +++++----- arch/sparc64/kernel/smp.c | 39 ++++++++++++++++++++++++--------------- arch/sparc64/kernel/ttable.S | 3 ++- arch/sparc64/mm/ultra.S | 5 +++++ 9 files changed, 60 insertions(+), 45 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/devices.c b/arch/sparc64/kernel/devices.c index 1341b99ca7a..007e8922cd1 100644 --- a/arch/sparc64/kernel/devices.c +++ b/arch/sparc64/kernel/devices.c @@ -157,7 +157,7 @@ unsigned int sun4v_vdev_device_interrupt(unsigned int dev_node) return 0; } - return sun4v_build_irq(sun4v_vdev_devhandle, irq, 4, 0); + return sun4v_build_irq(sun4v_vdev_devhandle, irq, 5, 0); } static const char *cpu_mid_prop(void) diff --git a/arch/sparc64/kernel/pci_psycho.c b/arch/sparc64/kernel/pci_psycho.c index f7b16e49c28..d17878b145c 100644 --- a/arch/sparc64/kernel/pci_psycho.c +++ b/arch/sparc64/kernel/pci_psycho.c @@ -286,17 +286,17 @@ static unsigned char psycho_pil_table[] = { /*0x14*/0, 0, 0, 0, /* PCI B slot 1 Int A, B, C, D */ /*0x18*/0, 0, 0, 0, /* PCI B slot 2 Int A, B, C, D */ /*0x1c*/0, 0, 0, 0, /* PCI B slot 3 Int A, B, C, D */ -/*0x20*/4, /* SCSI */ +/*0x20*/5, /* SCSI */ /*0x21*/5, /* Ethernet */ /*0x22*/8, /* Parallel Port */ /*0x23*/13, /* Audio Record */ /*0x24*/14, /* Audio Playback */ /*0x25*/15, /* PowerFail */ -/*0x26*/4, /* second SCSI */ +/*0x26*/5, /* second SCSI */ /*0x27*/11, /* Floppy */ -/*0x28*/4, /* Spare Hardware */ +/*0x28*/5, /* Spare Hardware */ /*0x29*/9, /* Keyboard */ -/*0x2a*/4, /* Mouse */ +/*0x2a*/5, /* Mouse */ /*0x2b*/12, /* Serial */ /*0x2c*/10, /* Timer 0 */ /*0x2d*/11, /* Timer 1 */ @@ -313,11 +313,11 @@ static int psycho_ino_to_pil(struct pci_dev *pdev, unsigned int ino) ret = psycho_pil_table[ino]; if (ret == 0 && pdev == NULL) { - ret = 4; + ret = 5; } else if (ret == 0) { switch ((pdev->class >> 16) & 0xff) { case PCI_BASE_CLASS_STORAGE: - ret = 4; + ret = 5; break; case PCI_BASE_CLASS_NETWORK: @@ -336,7 +336,7 @@ static int psycho_ino_to_pil(struct pci_dev *pdev, unsigned int ino) break; default: - ret = 4; + ret = 5; break; }; } diff --git a/arch/sparc64/kernel/pci_sabre.c b/arch/sparc64/kernel/pci_sabre.c index 5ddc9293197..f67bb7f078c 100644 --- a/arch/sparc64/kernel/pci_sabre.c +++ b/arch/sparc64/kernel/pci_sabre.c @@ -533,17 +533,17 @@ static unsigned char sabre_pil_table[] = { /*0x14*/0, 0, 0, 0, /* PCI B slot 1 Int A, B, C, D */ /*0x18*/0, 0, 0, 0, /* PCI B slot 2 Int A, B, C, D */ /*0x1c*/0, 0, 0, 0, /* PCI B slot 3 Int A, B, C, D */ -/*0x20*/4, /* SCSI */ +/*0x20*/5, /* SCSI */ /*0x21*/5, /* Ethernet */ /*0x22*/8, /* Parallel Port */ /*0x23*/13, /* Audio Record */ /*0x24*/14, /* Audio Playback */ /*0x25*/15, /* PowerFail */ -/*0x26*/4, /* second SCSI */ +/*0x26*/5, /* second SCSI */ /*0x27*/11, /* Floppy */ -/*0x28*/4, /* Spare Hardware */ +/*0x28*/5, /* Spare Hardware */ /*0x29*/9, /* Keyboard */ -/*0x2a*/4, /* Mouse */ +/*0x2a*/5, /* Mouse */ /*0x2b*/12, /* Serial */ /*0x2c*/10, /* Timer 0 */ /*0x2d*/11, /* Timer 1 */ @@ -565,11 +565,11 @@ static int sabre_ino_to_pil(struct pci_dev *pdev, unsigned int ino) ret = sabre_pil_table[ino]; if (ret == 0 && pdev == NULL) { - ret = 4; + ret = 5; } else if (ret == 0) { switch ((pdev->class >> 16) & 0xff) { case PCI_BASE_CLASS_STORAGE: - ret = 4; + ret = 5; break; case PCI_BASE_CLASS_NETWORK: @@ -588,7 +588,7 @@ static int sabre_ino_to_pil(struct pci_dev *pdev, unsigned int ino) break; default: - ret = 4; + ret = 5; break; }; } diff --git a/arch/sparc64/kernel/pci_schizo.c b/arch/sparc64/kernel/pci_schizo.c index 3a89f29e27d..7fe4de03ac2 100644 --- a/arch/sparc64/kernel/pci_schizo.c +++ b/arch/sparc64/kernel/pci_schizo.c @@ -243,8 +243,8 @@ static unsigned char schizo_pil_table[] = { /*0x0c*/0, 0, 0, 0, /* PCI slot 3 Int A, B, C, D */ /*0x10*/0, 0, 0, 0, /* PCI slot 4 Int A, B, C, D */ /*0x14*/0, 0, 0, 0, /* PCI slot 5 Int A, B, C, D */ -/*0x18*/4, /* SCSI */ -/*0x19*/4, /* second SCSI */ +/*0x18*/5, /* SCSI */ +/*0x19*/5, /* second SCSI */ /*0x1a*/0, /* UNKNOWN */ /*0x1b*/0, /* UNKNOWN */ /*0x1c*/8, /* Parallel */ @@ -254,7 +254,7 @@ static unsigned char schizo_pil_table[] = { /*0x20*/13, /* Audio Record */ /*0x21*/14, /* Audio Playback */ /*0x22*/12, /* Serial */ -/*0x23*/4, /* EBUS I2C */ +/*0x23*/5, /* EBUS I2C */ /*0x24*/10, /* RTC Clock */ /*0x25*/11, /* Floppy */ /*0x26*/0, /* UNKNOWN */ @@ -296,11 +296,11 @@ static int schizo_ino_to_pil(struct pci_dev *pdev, unsigned int ino) ret = schizo_pil_table[ino]; if (ret == 0 && pdev == NULL) { - ret = 4; + ret = 5; } else if (ret == 0) { switch ((pdev->class >> 16) & 0xff) { case PCI_BASE_CLASS_STORAGE: - ret = 4; + ret = 5; break; case PCI_BASE_CLASS_NETWORK: @@ -319,7 +319,7 @@ static int schizo_ino_to_pil(struct pci_dev *pdev, unsigned int ino) break; default: - ret = 4; + ret = 5; break; }; } diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c index a9c44c0ae0a..9372d4f376d 100644 --- a/arch/sparc64/kernel/pci_sun4v.c +++ b/arch/sparc64/kernel/pci_sun4v.c @@ -735,11 +735,11 @@ static unsigned int pci_sun4v_irq_build(struct pci_pbm_info *pbm, u32 devhandle = pbm->devhandle; int pil; - pil = 4; + pil = 5; if (pdev) { switch ((pdev->class >> 16) & 0xff) { case PCI_BASE_CLASS_STORAGE: - pil = 4; + pil = 5; break; case PCI_BASE_CLASS_NETWORK: @@ -758,7 +758,7 @@ static unsigned int pci_sun4v_irq_build(struct pci_pbm_info *pbm, break; default: - pil = 4; + pil = 5; break; }; } diff --git a/arch/sparc64/kernel/sbus.c b/arch/sparc64/kernel/sbus.c index d95a1bcf163..1d6ffdeabd4 100644 --- a/arch/sparc64/kernel/sbus.c +++ b/arch/sparc64/kernel/sbus.c @@ -693,11 +693,11 @@ void sbus_set_sbus64(struct sbus_dev *sdev, int bursts) /* SBUS SYSIO INO number to Sparc PIL level. */ static unsigned char sysio_ino_to_pil[] = { - 0, 4, 4, 7, 5, 7, 8, 9, /* SBUS slot 0 */ - 0, 4, 4, 7, 5, 7, 8, 9, /* SBUS slot 1 */ - 0, 4, 4, 7, 5, 7, 8, 9, /* SBUS slot 2 */ - 0, 4, 4, 7, 5, 7, 8, 9, /* SBUS slot 3 */ - 4, /* Onboard SCSI */ + 0, 5, 5, 7, 5, 7, 8, 9, /* SBUS slot 0 */ + 0, 5, 5, 7, 5, 7, 8, 9, /* SBUS slot 1 */ + 0, 5, 5, 7, 5, 7, 8, 9, /* SBUS slot 2 */ + 0, 5, 5, 7, 5, 7, 8, 9, /* SBUS slot 3 */ + 5, /* Onboard SCSI */ 5, /* Onboard Ethernet */ /*XXX*/ 8, /* Onboard BPP */ 0, /* Bogon */ diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index c4548a88953..cf56128097c 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -760,12 +760,9 @@ static int smp_call_function_mask(void (*func)(void *info), void *info, int nonatomic, int wait, cpumask_t mask) { struct call_data_struct data; - int cpus = cpus_weight(mask) - 1; + int cpus; long timeout; - if (!cpus) - return 0; - /* Can deadlock when called with interrupts disabled */ WARN_ON(irqs_disabled()); @@ -776,6 +773,11 @@ static int smp_call_function_mask(void (*func)(void *info), void *info, spin_lock(&call_lock); + cpu_clear(smp_processor_id(), mask); + cpus = cpus_weight(mask); + if (!cpus) + goto out_unlock; + call_data = &data; smp_cross_call_masked(&xcall_call_function, 0, 0, 0, mask); @@ -792,6 +794,7 @@ static int smp_call_function_mask(void (*func)(void *info), void *info, udelay(1); } +out_unlock: spin_unlock(&call_lock); return 0; @@ -845,6 +848,7 @@ extern unsigned long xcall_flush_tlb_pending; extern unsigned long xcall_flush_tlb_kernel_range; extern unsigned long xcall_report_regs; extern unsigned long xcall_receive_signal; +extern unsigned long xcall_new_mmu_context_version; #ifdef DCACHE_ALIASING_POSSIBLE extern unsigned long xcall_flush_dcache_page_cheetah; @@ -973,8 +977,14 @@ void smp_receive_signal(int cpu) } void smp_receive_signal_client(int irq, struct pt_regs *regs) +{ + clear_softint(1 << irq); +} + +void smp_new_mmu_context_version_client(int irq, struct pt_regs *regs) { struct mm_struct *mm; + unsigned long flags; clear_softint(1 << irq); @@ -982,25 +992,24 @@ void smp_receive_signal_client(int irq, struct pt_regs *regs) * the version of the one we are using is now out of date. */ mm = current->active_mm; - if (likely(mm)) { - unsigned long flags; + if (unlikely(!mm || (mm == &init_mm))) + return; - spin_lock_irqsave(&mm->context.lock, flags); + spin_lock_irqsave(&mm->context.lock, flags); - if (unlikely(!CTX_VALID(mm->context))) - get_new_mmu_context(mm); + if (unlikely(!CTX_VALID(mm->context))) + get_new_mmu_context(mm); - load_secondary_context(mm); - __flush_tlb_mm(CTX_HWBITS(mm->context), - SECONDARY_CONTEXT); + spin_unlock_irqrestore(&mm->context.lock, flags); - spin_unlock_irqrestore(&mm->context.lock, flags); - } + load_secondary_context(mm); + __flush_tlb_mm(CTX_HWBITS(mm->context), + SECONDARY_CONTEXT); } void smp_new_mmu_context_version(void) { - __smp_receive_signal_mask(cpu_online_map); + smp_cross_call(&xcall_new_mmu_context_version, 0, 0, 0); } void smp_report_regs(void) diff --git a/arch/sparc64/kernel/ttable.S b/arch/sparc64/kernel/ttable.S index d5a8dd52d1f..5d901519db5 100644 --- a/arch/sparc64/kernel/ttable.S +++ b/arch/sparc64/kernel/ttable.S @@ -51,12 +51,13 @@ tl0_resv03e: BTRAP(0x3e) BTRAP(0x3f) BTRAP(0x40) tl0_irq1: TRAP_IRQ(smp_call_function_client, 1) tl0_irq2: TRAP_IRQ(smp_receive_signal_client, 2) tl0_irq3: TRAP_IRQ(smp_penguin_jailcell, 3) +tl0_irq4: TRAP_IRQ(smp_new_mmu_context_version_client, 4) #else tl0_irq1: BTRAP(0x41) tl0_irq2: BTRAP(0x42) tl0_irq3: BTRAP(0x43) +tl0_irq4: BTRAP(0x44) #endif -tl0_irq4: TRAP_IRQ(handler_irq, 4) tl0_irq5: TRAP_IRQ(handler_irq, 5) TRAP_IRQ(handler_irq, 6) tl0_irq7: TRAP_IRQ(handler_irq, 7) TRAP_IRQ(handler_irq, 8) tl0_irq9: TRAP_IRQ(handler_irq, 9) TRAP_IRQ(handler_irq, 10) diff --git a/arch/sparc64/mm/ultra.S b/arch/sparc64/mm/ultra.S index bd8b0b4f878..f8479fad404 100644 --- a/arch/sparc64/mm/ultra.S +++ b/arch/sparc64/mm/ultra.S @@ -673,6 +673,11 @@ xcall_capture: wr %g0, (1 << PIL_SMP_CAPTURE), %set_softint retry + .globl xcall_new_mmu_context_version +xcall_new_mmu_context_version: + wr %g0, (1 << PIL_SMP_CTX_NEW_VERSION), %set_softint + retry + #endif /* CONFIG_SMP */ -- cgit v1.2.3-18-g5258 From d1112018b4bc82adf5c8a9c15a08954328f023ae Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 8 Mar 2006 02:16:07 -0800 Subject: [SPARC64]: Move over to sparsemem. This has been pending for a long time, and the fact that we waste a ton of ram on some configurations kind of pushed things over the edge. Signed-off-by: David S. Miller --- arch/sparc64/Kconfig | 6 ++ arch/sparc64/kernel/sparc64_ksyms.c | 7 -- arch/sparc64/mm/init.c | 134 ++++++++++++++++++++++++++---------- 3 files changed, 104 insertions(+), 43 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig index 4c0a50a7655..a253a39c3ff 100644 --- a/arch/sparc64/Kconfig +++ b/arch/sparc64/Kconfig @@ -186,6 +186,12 @@ endchoice endmenu +config ARCH_SPARSEMEM_ENABLE + def_bool y + +config ARCH_SPARSEMEM_DEFAULT + def_bool y + source "mm/Kconfig" config GENERIC_ISA_DMA diff --git a/arch/sparc64/kernel/sparc64_ksyms.c b/arch/sparc64/kernel/sparc64_ksyms.c index e87fe7dfc7d..9914a17651b 100644 --- a/arch/sparc64/kernel/sparc64_ksyms.c +++ b/arch/sparc64/kernel/sparc64_ksyms.c @@ -95,9 +95,6 @@ extern int __ashrdi3(int, int); extern int dump_fpu (struct pt_regs * regs, elf_fpregset_t * fpregs); -extern unsigned long phys_base; -extern unsigned long pfn_base; - extern unsigned int sys_call_table[]; extern void xor_vis_2(unsigned long, unsigned long *, unsigned long *); @@ -346,11 +343,7 @@ EXPORT_SYMBOL(__strncpy_from_user); EXPORT_SYMBOL(__clear_user); /* Various address conversion macros use this. */ -EXPORT_SYMBOL(phys_base); -EXPORT_SYMBOL(pfn_base); EXPORT_SYMBOL(sparc64_valid_addr_bitmap); -EXPORT_SYMBOL(page_to_pfn); -EXPORT_SYMBOL(pfn_to_page); /* No version information on this, heavily used in inline asm, * and will always be 'void __ret_efault(void)'. diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index a63939347b3..5f67b53b3a5 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -130,11 +130,9 @@ static void __init read_obp_memory(const char *property, unsigned long *sparc64_valid_addr_bitmap __read_mostly; -/* Ugly, but necessary... -DaveM */ -unsigned long phys_base __read_mostly; +/* Kernel physical address base and size in bytes. */ unsigned long kern_base __read_mostly; unsigned long kern_size __read_mostly; -unsigned long pfn_base __read_mostly; /* get_new_mmu_context() uses "cache + 1". */ DEFINE_SPINLOCK(ctx_alloc_lock); @@ -368,16 +366,6 @@ void __kprobes flush_icache_range(unsigned long start, unsigned long end) } } -unsigned long page_to_pfn(struct page *page) -{ - return (unsigned long) ((page - mem_map) + pfn_base); -} - -struct page *pfn_to_page(unsigned long pfn) -{ - return (mem_map + (pfn - pfn_base)); -} - void show_mem(void) { printk("Mem-info:\n"); @@ -773,9 +761,78 @@ void sparc_ultra_dump_dtlb(void) extern unsigned long cmdline_memory_size; -unsigned long __init bootmem_init(unsigned long *pages_avail) +/* Find a free area for the bootmem map, avoiding the kernel image + * and the initial ramdisk. + */ +static unsigned long __init choose_bootmap_pfn(unsigned long start_pfn, + unsigned long end_pfn) { - unsigned long bootmap_size, start_pfn, end_pfn; + unsigned long avoid_start, avoid_end, bootmap_size; + int i; + + bootmap_size = ((end_pfn - start_pfn) + 7) / 8; + bootmap_size = ALIGN(bootmap_size, sizeof(long)); + + avoid_start = avoid_end = 0; +#ifdef CONFIG_BLK_DEV_INITRD + avoid_start = initrd_start; + avoid_end = PAGE_ALIGN(initrd_end); +#endif + +#ifdef CONFIG_DEBUG_BOOTMEM + prom_printf("choose_bootmap_pfn: kern[%lx:%lx] avoid[%lx:%lx]\n", + kern_base, PAGE_ALIGN(kern_base + kern_size), + avoid_start, avoid_end); +#endif + for (i = 0; i < pavail_ents; i++) { + unsigned long start, end; + + start = pavail[i].phys_addr; + end = start + pavail[i].reg_size; + + while (start < end) { + if (start >= kern_base && + start < PAGE_ALIGN(kern_base + kern_size)) { + start = PAGE_ALIGN(kern_base + kern_size); + continue; + } + if (start >= avoid_start && start < avoid_end) { + start = avoid_end; + continue; + } + + if ((end - start) < bootmap_size) + break; + + if (start < kern_base && + (start + bootmap_size) > kern_base) { + start = PAGE_ALIGN(kern_base + kern_size); + continue; + } + + if (start < avoid_start && + (start + bootmap_size) > avoid_start) { + start = avoid_end; + continue; + } + + /* OK, it doesn't overlap anything, use it. */ +#ifdef CONFIG_DEBUG_BOOTMEM + prom_printf("choose_bootmap_pfn: Using %lx [%lx]\n", + start >> PAGE_SHIFT, start); +#endif + return start >> PAGE_SHIFT; + } + } + + prom_printf("Cannot find free area for bootmap, aborting.\n"); + prom_halt(); +} + +static unsigned long __init bootmem_init(unsigned long *pages_avail, + unsigned long phys_base) +{ + unsigned long bootmap_size, end_pfn; unsigned long end_of_phys_memory = 0UL; unsigned long bootmap_pfn, bytes_avail, size; int i; @@ -813,14 +870,6 @@ unsigned long __init bootmem_init(unsigned long *pages_avail) *pages_avail = bytes_avail >> PAGE_SHIFT; - /* Start with page aligned address of last symbol in kernel - * image. The kernel is hard mapped below PAGE_OFFSET in a - * 4MB locked TLB translation. - */ - start_pfn = PAGE_ALIGN(kern_base + kern_size) >> PAGE_SHIFT; - - bootmap_pfn = start_pfn; - end_pfn = end_of_phys_memory >> PAGE_SHIFT; #ifdef CONFIG_BLK_DEV_INITRD @@ -837,23 +886,23 @@ unsigned long __init bootmem_init(unsigned long *pages_avail) "(0x%016lx > 0x%016lx)\ndisabling initrd\n", initrd_end, end_of_phys_memory); initrd_start = 0; - } - if (initrd_start) { - if (initrd_start >= (start_pfn << PAGE_SHIFT) && - initrd_start < (start_pfn << PAGE_SHIFT) + 2 * PAGE_SIZE) - bootmap_pfn = PAGE_ALIGN (initrd_end) >> PAGE_SHIFT; + initrd_end = 0; } } #endif /* Initialize the boot-time allocator. */ max_pfn = max_low_pfn = end_pfn; - min_low_pfn = pfn_base; + min_low_pfn = (phys_base >> PAGE_SHIFT); + + bootmap_pfn = choose_bootmap_pfn(min_low_pfn, end_pfn); #ifdef CONFIG_DEBUG_BOOTMEM prom_printf("init_bootmem(min[%lx], bootmap[%lx], max[%lx])\n", min_low_pfn, bootmap_pfn, max_low_pfn); #endif - bootmap_size = init_bootmem_node(NODE_DATA(0), bootmap_pfn, pfn_base, end_pfn); + bootmap_size = init_bootmem_node(NODE_DATA(0), bootmap_pfn, + (phys_base >> PAGE_SHIFT), + end_pfn); /* Now register the available physical memory with the * allocator. @@ -901,6 +950,20 @@ unsigned long __init bootmem_init(unsigned long *pages_avail) reserve_bootmem((bootmap_pfn << PAGE_SHIFT), size); *pages_avail -= PAGE_ALIGN(size) >> PAGE_SHIFT; + for (i = 0; i < pavail_ents; i++) { + unsigned long start_pfn, end_pfn; + + start_pfn = pavail[i].phys_addr >> PAGE_SHIFT; + end_pfn = (start_pfn + (pavail[i].reg_size >> PAGE_SHIFT)); +#ifdef CONFIG_DEBUG_BOOTMEM + prom_printf("memory_present(0, %lx, %lx)\n", + start_pfn, end_pfn); +#endif + memory_present(0, start_pfn, end_pfn); + } + + sparse_init(); + return end_pfn; } @@ -1180,7 +1243,7 @@ static void sun4v_pgprot_init(void); void __init paging_init(void) { - unsigned long end_pfn, pages_avail, shift; + unsigned long end_pfn, pages_avail, shift, phys_base; unsigned long real_end, i; kern_base = (prom_boot_mapping_phys_low >> 22UL) << 22UL; @@ -1211,8 +1274,6 @@ void __init paging_init(void) for (i = 0; i < pavail_ents; i++) phys_base = min(phys_base, pavail[i].phys_addr); - pfn_base = phys_base >> PAGE_SHIFT; - set_bit(0, mmu_context_bmap); shift = kern_base + PAGE_OFFSET - ((unsigned long)KERNBASE); @@ -1248,7 +1309,9 @@ void __init paging_init(void) /* Setup bootmem... */ pages_avail = 0; - last_valid_pfn = end_pfn = bootmem_init(&pages_avail); + last_valid_pfn = end_pfn = bootmem_init(&pages_avail, phys_base); + + max_mapnr = last_valid_pfn - (phys_base >> PAGE_SHIFT); kernel_physical_mapping_init(); @@ -1261,7 +1324,7 @@ void __init paging_init(void) for (znum = 0; znum < MAX_NR_ZONES; znum++) zones_size[znum] = zholes_size[znum] = 0; - npages = end_pfn - pfn_base; + npages = end_pfn - (phys_base >> PAGE_SHIFT); zones_size[ZONE_DMA] = npages; zholes_size[ZONE_DMA] = npages - pages_avail; @@ -1336,7 +1399,6 @@ void __init mem_init(void) taint_real_pages(); - max_mapnr = last_valid_pfn - pfn_base; high_memory = __va(last_valid_pfn << PAGE_SHIFT); #ifdef CONFIG_DEBUG_BOOTMEM -- cgit v1.2.3-18-g5258 From 17b0e199a10184d8c5bbbd79a4cee993bb1fb257 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 8 Mar 2006 15:57:03 -0800 Subject: [SPARC64]: Fix 32-bit truncation which broke sparsemem. The page->flags manipulations done by the D-cache dirty state tracking was broken because the constants were not marked with "UL" to make them 64-bit, which means we were clobbering the upper 32-bits of page->flags all the time. This doesn't jive well with sparsemem which stores the section and indexing information in the top 32-bits of page->flags. This is yet another sparc64 bug which has been with us forever. While we're here, tidy up some things in bootmem_init() and paginig_init(): 1) Pass min_low_pfn to init_bootmem_node(), it's identical to (phys_base >> PAGE_SHIFT) but we should use consistent with the variable names we print in CONFIG_BOOTMEM_DEBUG 2) max_mapnr, although no longer used, was being set inaccurately, we shouldn't subtract pfn_base any more. 3) All the games with phys_base in the zones_*[] arrays we pass to free_area_init_node() are no longer necessary. Thanks to Josh Grebe and Fabbione for the bug reports and testing. Fix also verified locally on an SB2500 which had a memory layout that triggered the same problem. Signed-off-by: David S. Miller --- arch/sparc64/mm/init.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 5f67b53b3a5..b40f6477dea 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -205,8 +205,8 @@ inline void flush_dcache_page_impl(struct page *page) } #define PG_dcache_dirty PG_arch_1 -#define PG_dcache_cpu_shift 24 -#define PG_dcache_cpu_mask (256 - 1) +#define PG_dcache_cpu_shift 24UL +#define PG_dcache_cpu_mask (256UL - 1UL) #if NR_CPUS > 256 #error D-cache dirty tracking and thread_info->cpu need fixing for > 256 cpus @@ -901,8 +901,7 @@ static unsigned long __init bootmem_init(unsigned long *pages_avail, min_low_pfn, bootmap_pfn, max_low_pfn); #endif bootmap_size = init_bootmem_node(NODE_DATA(0), bootmap_pfn, - (phys_base >> PAGE_SHIFT), - end_pfn); + min_low_pfn, end_pfn); /* Now register the available physical memory with the * allocator. @@ -1311,25 +1310,24 @@ void __init paging_init(void) pages_avail = 0; last_valid_pfn = end_pfn = bootmem_init(&pages_avail, phys_base); - max_mapnr = last_valid_pfn - (phys_base >> PAGE_SHIFT); + max_mapnr = last_valid_pfn; kernel_physical_mapping_init(); { unsigned long zones_size[MAX_NR_ZONES]; unsigned long zholes_size[MAX_NR_ZONES]; - unsigned long npages; int znum; for (znum = 0; znum < MAX_NR_ZONES; znum++) zones_size[znum] = zholes_size[znum] = 0; - npages = end_pfn - (phys_base >> PAGE_SHIFT); - zones_size[ZONE_DMA] = npages; - zholes_size[ZONE_DMA] = npages - pages_avail; + zones_size[ZONE_DMA] = end_pfn; + zholes_size[ZONE_DMA] = end_pfn - pages_avail; free_area_init_node(0, &contig_page_data, zones_size, - phys_base >> PAGE_SHIFT, zholes_size); + __pa(PAGE_OFFSET) >> PAGE_SHIFT, + zholes_size); } device_scan(); -- cgit v1.2.3-18-g5258 From 8935dced547afbf37d0fcfcac9a3556494e53104 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 8 Mar 2006 16:09:19 -0800 Subject: [SPARC64]: Add SMT scheduling support for Niagara. The mapping is a simple "(cpuid >> 2) == core" for now. Later we'll add more sophisticated code that will walk the sun4v machine description and figure this out from there. We should also add core mappings for jaguar and panther processors. Signed-off-by: David S. Miller --- arch/sparc64/Kconfig | 9 +++++++++ arch/sparc64/kernel/smp.c | 18 ++++++++++++++++++ 2 files changed, 27 insertions(+) (limited to 'arch') diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig index a253a39c3ff..49b652f9b1d 100644 --- a/arch/sparc64/Kconfig +++ b/arch/sparc64/Kconfig @@ -356,6 +356,15 @@ config SOLARIS_EMUL endmenu +config SCHED_SMT + bool "SMT (Hyperthreading) scheduler support" + depends on SMP + default y + help + SMT scheduler support improves the CPU scheduler's decision making + when dealing with UltraSPARC cpus at a cost of slightly increased + overhead in some places. If unsure say N here. + config CMDLINE_BOOL bool "Default bootloader kernel arguments" diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index cf56128097c..373a701c90a 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -47,6 +47,8 @@ static unsigned char boot_cpu_id; cpumask_t cpu_online_map __read_mostly = CPU_MASK_NONE; cpumask_t phys_cpu_present_map __read_mostly = CPU_MASK_NONE; +cpumask_t cpu_sibling_map[NR_CPUS] __read_mostly = + { [0 ... NR_CPUS-1] = CPU_MASK_NONE }; static cpumask_t smp_commenced_mask; static cpumask_t cpu_callout_map; @@ -1291,6 +1293,8 @@ int setup_profiling_timer(unsigned int multiplier) /* Constrain the number of cpus to max_cpus. */ void __init smp_prepare_cpus(unsigned int max_cpus) { + int i; + if (num_possible_cpus() > max_cpus) { int instance, mid; @@ -1305,6 +1309,20 @@ void __init smp_prepare_cpus(unsigned int max_cpus) } } + for_each_cpu(i) { + if (tlb_type == hypervisor) { + int j; + + /* XXX get this mapping from machine description */ + for_each_cpu(j) { + if ((j >> 2) == (i >> 2)) + cpu_set(j, cpu_sibling_map[i]); + } + } else { + cpu_set(i, cpu_sibling_map[i]); + } + } + smp_store_cpu_info(boot_cpu_id); } -- cgit v1.2.3-18-g5258 From 90a6646bf6a1ca821f32d5510e935855612904df Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 8 Mar 2006 17:18:19 -0800 Subject: [SPARC64]: Fix system type in /proc/cpuinfo and remove bogus OBP check. Report 'sun4v' when appropriate in /proc/cpuinfo Remove all the verifications of the OBP version string. Just make sure it's there, and report it raw in the bootup logs and via /proc/cpuinfo. Signed-off-by: David S. Miller --- arch/sparc64/kernel/setup.c | 13 ++++++------ arch/sparc64/prom/init.c | 48 ++++----------------------------------------- arch/sparc64/prom/misc.c | 18 ----------------- 3 files changed, 10 insertions(+), 69 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index 2a2a8a6cd17..7ae4027a919 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -442,9 +442,8 @@ static int show_cpuinfo(struct seq_file *m, void *__unused) seq_printf(m, "cpu\t\t: %s\n" "fpu\t\t: %s\n" - "promlib\t\t: Version 3 Revision %d\n" - "prom\t\t: %d.%d.%d\n" - "type\t\t: sun4u\n" + "prom\t\t: %s\n" + "type\t\t: %s\n" "ncpus probed\t: %d\n" "ncpus active\t: %d\n" "D$ parity tl1\t: %u\n" @@ -456,10 +455,10 @@ static int show_cpuinfo(struct seq_file *m, void *__unused) , sparc_cpu_type, sparc_fpu_type, - prom_rev, - prom_prev >> 16, - (prom_prev >> 8) & 0xff, - prom_prev & 0xff, + prom_version, + ((tlb_type == hypervisor) ? + "sun4v" : + "sun4u"), ncpus_probed, num_online_cpus(), dcache_parity_tl1_occurred, diff --git a/arch/sparc64/prom/init.c b/arch/sparc64/prom/init.c index 095755e428a..1c0db842a6f 100644 --- a/arch/sparc64/prom/init.c +++ b/arch/sparc64/prom/init.c @@ -14,8 +14,8 @@ #include #include -enum prom_major_version prom_vers; -unsigned int prom_rev, prom_prev; +/* OBP version string. */ +char prom_version[80]; /* The root node of the prom device tree. */ int prom_stdin, prom_stdout; @@ -30,13 +30,7 @@ extern void prom_cif_init(void *, void *); void __init prom_init(void *cif_handler, void *cif_stack) { - char buffer[80], *p; - int ints[3]; int node; - int i = 0; - int bufadjust; - - prom_vers = PROM_P1275; prom_cif_init(cif_handler, cif_stack); @@ -51,44 +45,10 @@ void __init prom_init(void *cif_handler, void *cif_stack) if (!node || node == -1) prom_halt(); - prom_getstring(node, "version", buffer, sizeof (buffer)); + prom_getstring(node, "version", prom_version, sizeof(prom_version)); prom_printf("\n"); - if (strncmp(buffer, "OBP ", 4)) - goto strange_version; - - /* - * Version field is expected to be 'OBP xx.yy.zz date...' - * However, Sun can't stick to this format very well, so - * we need to check for 'OBP xx.yy.zz date...' and adjust - * accordingly. -spot - */ - - if (strncmp(buffer, "OBP ", 5)) - bufadjust = 4; - else - bufadjust = 5; - - p = buffer + bufadjust; - while (p && isdigit(*p) && i < 3) { - ints[i++] = simple_strtoul(p, NULL, 0); - if ((p = strchr(p, '.')) != NULL) - p++; - } - if (i != 3) - goto strange_version; - - prom_rev = ints[1]; - prom_prev = (ints[0] << 16) | (ints[1] << 8) | ints[2]; - - printk("PROMLIB: Sun IEEE Boot Prom %s\n", buffer + bufadjust); + printk("PROMLIB: Sun IEEE Boot Prom '%s'\n", prom_version); printk("PROMLIB: Root node compatible: %s\n", prom_root_compatible); - - /* Initialization successful. */ - return; - -strange_version: - prom_printf ("Strange OBP version `%s'.\n", buffer); - prom_halt (); } diff --git a/arch/sparc64/prom/misc.c b/arch/sparc64/prom/misc.c index 90df42141b1..577bde8b664 100644 --- a/arch/sparc64/prom/misc.c +++ b/arch/sparc64/prom/misc.c @@ -112,24 +112,6 @@ unsigned char prom_get_idprom(char *idbuf, int num_bytes) return 0xff; } -/* Get the major prom version number. */ -int prom_version(void) -{ - return PROM_P1275; -} - -/* Get the prom plugin-revision. */ -int prom_getrev(void) -{ - return prom_rev; -} - -/* Get the prom firmware print revision. */ -int prom_getprev(void) -{ - return prom_prev; -} - /* Install Linux trap table so PROM uses that instead of its own. */ void prom_set_trap_table(unsigned long tba) { -- cgit v1.2.3-18-g5258 From 0c51ed93ca0ecbf44ec096f4bd04c12a3e761e6b Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 13 Mar 2006 01:27:34 -0800 Subject: [SPARC64]: First cut at VIS simulator for Niagara. Niagara does not implement some of the VIS instructions in hardware, so we have to emulate them. Signed-off-by: David S. Miller --- arch/sparc64/kernel/Makefile | 3 +- arch/sparc64/kernel/traps.c | 5 + arch/sparc64/kernel/visemul.c | 894 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 901 insertions(+), 1 deletion(-) create mode 100644 arch/sparc64/kernel/visemul.c (limited to 'arch') diff --git a/arch/sparc64/kernel/Makefile b/arch/sparc64/kernel/Makefile index fedfd9c6729..6f6816488b0 100644 --- a/arch/sparc64/kernel/Makefile +++ b/arch/sparc64/kernel/Makefile @@ -11,7 +11,8 @@ obj-y := process.o setup.o cpu.o idprom.o \ traps.o devices.o auxio.o una_asm.o \ irq.o ptrace.o time.o sys_sparc.o signal.o \ unaligned.o central.o pci.o starfire.o semaphore.o \ - power.o sbus.o iommu_common.o sparc64_ksyms.o chmc.o + power.o sbus.o iommu_common.o sparc64_ksyms.o chmc.o \ + visemul.o obj-$(CONFIG_PCI) += ebus.o isa.o pci_common.o pci_iommu.o \ pci_psycho.o pci_sabre.o pci_schizo.o \ diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c index 043a72658f6..7f7dba0ca96 100644 --- a/arch/sparc64/kernel/traps.c +++ b/arch/sparc64/kernel/traps.c @@ -2273,6 +2273,11 @@ void do_illegal_instruction(struct pt_regs *regs) } else if ((insn & 0xc1580000) == 0xc1100000) /* LDQ/STQ */ { if (handle_ldf_stq(insn, regs)) return; + } else if (tlb_type == hypervisor) { + extern int vis_emul(struct pt_regs *, unsigned int); + + if (!vis_emul(regs, insn)) + return; } } info.si_signo = SIGILL; diff --git a/arch/sparc64/kernel/visemul.c b/arch/sparc64/kernel/visemul.c new file mode 100644 index 00000000000..84fedaa38aa --- /dev/null +++ b/arch/sparc64/kernel/visemul.c @@ -0,0 +1,894 @@ +/* visemul.c: Emulation of VIS instructions. + * + * Copyright (C) 2006 David S. Miller (davem@davemloft.net) + */ +#include +#include +#include + +#include +#include +#include +#include +#include + +/* OPF field of various VIS instructions. */ + +/* 000111011 - four 16-bit packs */ +#define FPACK16_OPF 0x03b + +/* 000111010 - two 32-bit packs */ +#define FPACK32_OPF 0x03a + +/* 000111101 - four 16-bit packs */ +#define FPACKFIX_OPF 0x03d + +/* 001001101 - four 16-bit expands */ +#define FEXPAND_OPF 0x04d + +/* 001001011 - two 32-bit merges */ +#define FPMERGE_OPF 0x04b + +/* 000110001 - 8-by-16-bit partitoned product */ +#define FMUL8x16_OPF 0x031 + +/* 000110011 - 8-by-16-bit upper alpha partitioned product */ +#define FMUL8x16AU_OPF 0x033 + +/* 000110101 - 8-by-16-bit lower alpha partitioned product */ +#define FMUL8x16AL_OPF 0x035 + +/* 000110110 - upper 8-by-16-bit partitioned product */ +#define FMUL8SUx16_OPF 0x036 + +/* 000110111 - lower 8-by-16-bit partitioned product */ +#define FMUL8ULx16_OPF 0x037 + +/* 000111000 - upper 8-by-16-bit partitioned product */ +#define FMULD8SUx16_OPF 0x038 + +/* 000111001 - lower unsigned 8-by-16-bit partitioned product */ +#define FMULD8ULx16_OPF 0x039 + +/* 000101000 - four 16-bit compare; set rd if src1 > src2 */ +#define FCMPGT16_OPF 0x028 + +/* 000101100 - two 32-bit compare; set rd if src1 > src2 */ +#define FCMPGT32_OPF 0x02c + +/* 000100000 - four 16-bit compare; set rd if src1 <= src2 */ +#define FCMPLE16_OPF 0x020 + +/* 000100100 - two 32-bit compare; set rd if src1 <= src2 */ +#define FCMPLE32_OPF 0x024 + +/* 000100010 - four 16-bit compare; set rd if src1 != src2 */ +#define FCMPNE16_OPF 0x022 + +/* 000100110 - two 32-bit compare; set rd if src1 != src2 */ +#define FCMPNE32_OPF 0x026 + +/* 000101010 - four 16-bit compare; set rd if src1 == src2 */ +#define FCMPEQ16_OPF 0x02a + +/* 000101110 - two 32-bit compare; set rd if src1 == src2 */ +#define FCMPEQ32_OPF 0x02e + +/* 000000000 - Eight 8-bit edge boundary processing */ +#define EDGE8_OPF 0x000 + +/* 000000001 - Eight 8-bit edge boundary processing, no CC */ +#define EDGE8N_OPF 0x001 + +/* 000000010 - Eight 8-bit edge boundary processing, little-endian */ +#define EDGE8L_OPF 0x002 + +/* 000000011 - Eight 8-bit edge boundary processing, little-endian, no CC */ +#define EDGE8LN_OPF 0x003 + +/* 000000100 - Four 16-bit edge boundary processing */ +#define EDGE16_OPF 0x004 + +/* 000000101 - Four 16-bit edge boundary processing, no CC */ +#define EDGE16N_OPF 0x005 + +/* 000000110 - Four 16-bit edge boundary processing, little-endian */ +#define EDGE16L_OPF 0x006 + +/* 000000111 - Four 16-bit edge boundary processing, little-endian, no CC */ +#define EDGE16LN_OPF 0x007 + +/* 000001000 - Two 32-bit edge boundary processing */ +#define EDGE32_OPF 0x008 + +/* 000001001 - Two 32-bit edge boundary processing, no CC */ +#define EDGE32N_OPF 0x009 + +/* 000001010 - Two 32-bit edge boundary processing, little-endian */ +#define EDGE32L_OPF 0x00a + +/* 000001011 - Two 32-bit edge boundary processing, little-endian, no CC */ +#define EDGE32LN_OPF 0x00b + +/* 000111110 - distance between 8 8-bit components */ +#define PDIST_OPF 0x03e + +/* 000010000 - convert 8-bit 3-D address to blocked byte address */ +#define ARRAY8_OPF 0x010 + +/* 000010010 - convert 16-bit 3-D address to blocked byte address */ +#define ARRAY16_OPF 0x012 + +/* 000010100 - convert 32-bit 3-D address to blocked byte address */ +#define ARRAY32_OPF 0x014 + +/* 000011001 - Set the GSR.MASK field in preparation for a BSHUFFLE */ +#define BMASK_OPF 0x019 + +/* 001001100 - Permute bytes as specified by GSR.MASK */ +#define BSHUFFLE_OPF 0x04c + +#define VIS_OPCODE_MASK ((0x3 << 30) | (0x3f << 19)) +#define VIS_OPCODE_VAL ((0x2 << 30) | (0x36 << 19)) + +#define VIS_OPF_SHIFT 5 +#define VIS_OPF_MASK (0x1ff << VIS_OPF_SHIFT) + +#define RS1(INSN) (((INSN) >> 24) & 0x1f) +#define RS2(INSN) (((INSN) >> 0) & 0x1f) +#define RD(INSN) (((INSN) >> 25) & 0x1f) + +static inline void maybe_flush_windows(unsigned int rs1, unsigned int rs2, + unsigned int rd, int from_kernel) +{ + if (rs2 >= 16 || rs1 >= 16 || rd >= 16) { + if (from_kernel != 0) + __asm__ __volatile__("flushw"); + else + flushw_user(); + } +} + +static unsigned long fetch_reg(unsigned int reg, struct pt_regs *regs) +{ + unsigned long value; + + if (reg < 16) + return (!reg ? 0 : regs->u_regs[reg]); + if (regs->tstate & TSTATE_PRIV) { + struct reg_window *win; + win = (struct reg_window *)(regs->u_regs[UREG_FP] + STACK_BIAS); + value = win->locals[reg - 16]; + } else if (test_thread_flag(TIF_32BIT)) { + struct reg_window32 __user *win32; + win32 = (struct reg_window32 __user *)((unsigned long)((u32)regs->u_regs[UREG_FP])); + get_user(value, &win32->locals[reg - 16]); + } else { + struct reg_window __user *win; + win = (struct reg_window __user *)(regs->u_regs[UREG_FP] + STACK_BIAS); + get_user(value, &win->locals[reg - 16]); + } + return value; +} + +static inline unsigned long __user *__fetch_reg_addr_user(unsigned int reg, + struct pt_regs *regs) +{ + BUG_ON(reg < 16); + BUG_ON(regs->tstate & TSTATE_PRIV); + + if (test_thread_flag(TIF_32BIT)) { + struct reg_window32 __user *win32; + win32 = (struct reg_window32 __user *)((unsigned long)((u32)regs->u_regs[UREG_FP])); + return (unsigned long __user *)&win32->locals[reg - 16]; + } else { + struct reg_window __user *win; + win = (struct reg_window __user *)(regs->u_regs[UREG_FP] + STACK_BIAS); + return &win->locals[reg - 16]; + } +} + +static inline unsigned long *__fetch_reg_addr_kern(unsigned int reg, + struct pt_regs *regs) +{ + BUG_ON(reg >= 16); + BUG_ON(regs->tstate & TSTATE_PRIV); + + return ®s->u_regs[reg]; +} + +static void store_reg(struct pt_regs *regs, unsigned long val, unsigned long rd) +{ + if (rd < 16) { + unsigned long *rd_kern = __fetch_reg_addr_kern(rd, regs); + + *rd_kern = val; + } else { + unsigned long __user *rd_user = __fetch_reg_addr_user(rd, regs); + + if (test_thread_flag(TIF_32BIT)) + __put_user((u32)val, (u32 __user *)rd_user); + else + __put_user(val, rd_user); + } +} + +static inline unsigned long fpd_regval(struct fpustate *f, + unsigned int insn_regnum) +{ + insn_regnum = (((insn_regnum & 1) << 5) | + (insn_regnum & 0x1e)); + + return *(unsigned long *) &f->regs[insn_regnum]; +} + +static inline unsigned long *fpd_regaddr(struct fpustate *f, + unsigned int insn_regnum) +{ + insn_regnum = (((insn_regnum & 1) << 5) | + (insn_regnum & 0x1e)); + + return (unsigned long *) &f->regs[insn_regnum]; +} + +static inline unsigned int fps_regval(struct fpustate *f, + unsigned int insn_regnum) +{ + return f->regs[insn_regnum]; +} + +static inline unsigned int *fps_regaddr(struct fpustate *f, + unsigned int insn_regnum) +{ + return &f->regs[insn_regnum]; +} + +struct edge_tab { + u16 left, right; +}; +struct edge_tab edge8_tab[8] = { + { 0xff, 0x80 }, + { 0x7f, 0xc0 }, + { 0x3f, 0xe0 }, + { 0x1f, 0xf0 }, + { 0x0f, 0xf8 }, + { 0x07, 0xfc }, + { 0x03, 0xfe }, + { 0x01, 0xff }, +}; +struct edge_tab edge8_tab_l[8] = { + { 0xff, 0x01 }, + { 0xfe, 0x03 }, + { 0xfc, 0x07 }, + { 0xf8, 0x0f }, + { 0xf0, 0x1f }, + { 0xe0, 0x3f }, + { 0xc0, 0x7f }, + { 0x80, 0xff }, +}; +struct edge_tab edge16_tab[4] = { + { 0xf, 0x8 }, + { 0x7, 0xc }, + { 0x3, 0xe }, + { 0x1, 0xf }, +}; +struct edge_tab edge16_tab_l[4] = { + { 0xf, 0x1 }, + { 0xe, 0x3 }, + { 0xc, 0x7 }, + { 0x8, 0xf }, +}; +struct edge_tab edge32_tab[2] = { + { 0x3, 0x2 }, + { 0x1, 0x3 }, +}; +struct edge_tab edge32_tab_l[2] = { + { 0x3, 0x1 }, + { 0x2, 0x3 }, +}; + +static void edge(struct pt_regs *regs, unsigned int insn, unsigned int opf) +{ + unsigned long orig_rs1, rs1, orig_rs2, rs2, rd_val; + u16 left, right; + + maybe_flush_windows(RS1(insn), RS2(insn), RD(insn), 0); + orig_rs1 = rs1 = fetch_reg(RS1(insn), regs); + orig_rs2 = rs2 = fetch_reg(RS2(insn), regs); + + if (test_thread_flag(TIF_32BIT)) { + rs1 = rs1 & 0xffffffff; + rs2 = rs2 & 0xffffffff; + } + switch (opf) { + default: + case EDGE8_OPF: + case EDGE8N_OPF: + left = edge8_tab[rs1 & 0x7].left; + right = edge8_tab[rs2 & 0x7].right; + break; + case EDGE8L_OPF: + case EDGE8LN_OPF: + left = edge8_tab_l[rs1 & 0x7].left; + right = edge8_tab_l[rs2 & 0x7].right; + break; + + case EDGE16_OPF: + case EDGE16N_OPF: + left = edge16_tab[(rs1 >> 1) & 0x3].left; + right = edge16_tab[(rs2 >> 1) & 0x3].right; + break; + + case EDGE16L_OPF: + case EDGE16LN_OPF: + left = edge16_tab_l[(rs1 >> 1) & 0x3].left; + right = edge16_tab_l[(rs2 >> 1) & 0x3].right; + break; + + case EDGE32_OPF: + case EDGE32N_OPF: + left = edge32_tab[(rs1 >> 2) & 0x1].left; + right = edge32_tab[(rs2 >> 2) & 0x1].right; + break; + + case EDGE32L_OPF: + case EDGE32LN_OPF: + left = edge32_tab_l[(rs1 >> 2) & 0x1].left; + right = edge32_tab_l[(rs2 >> 2) & 0x1].right; + break; + }; + + if ((rs1 & ~0x7UL) == (rs2 & ~0x7UL)) + rd_val = right & left; + else + rd_val = left; + + store_reg(regs, rd_val, RD(insn)); + + switch (opf) { + case EDGE8_OPF: + case EDGE8L_OPF: + case EDGE16_OPF: + case EDGE16L_OPF: + case EDGE32_OPF: + case EDGE32L_OPF: { + unsigned long ccr, tstate; + + __asm__ __volatile__("subcc %1, %2, %%g0\n\t" + "rd %%ccr, %0" + : "=r" (ccr) + : "r" (orig_rs1), "r" (orig_rs2) + : "cc"); + tstate = regs->tstate & ~(TSTATE_XCC | TSTATE_ICC); + regs->tstate = tstate | (ccr << 32UL); + } + }; +} + +static void array(struct pt_regs *regs, unsigned int insn, unsigned int opf) +{ + unsigned long rs1, rs2, rd_val; + unsigned int bits, bits_mask; + + maybe_flush_windows(RS1(insn), RS2(insn), RD(insn), 0); + rs1 = fetch_reg(RS1(insn), regs); + rs2 = fetch_reg(RS2(insn), regs); + + bits = (rs2 > 5 ? 5 : rs2); + bits_mask = (1UL << bits) - 1UL; + + rd_val = ((((rs1 >> 11) & 0x3) << 0) | + (((rs1 >> 33) & 0x3) << 2) | + (((rs1 >> 55) & 0x1) << 4) | + (((rs1 >> 13) & 0xf) << 5) | + (((rs1 >> 35) & 0xf) << 9) | + (((rs1 >> 56) & 0xf) << 13) | + (((rs1 >> 17) & bits_mask) << 17) | + (((rs1 >> 39) & bits_mask) << (17 + bits)) | + (((rs1 >> 60) & 0xf) << (17 + (2*bits)))); + + switch (opf) { + case ARRAY16_OPF: + rd_val <<= 1; + break; + + case ARRAY32_OPF: + rd_val <<= 2; + }; + + store_reg(regs, rd_val, RD(insn)); +} + +static void bmask(struct pt_regs *regs, unsigned int insn) +{ + unsigned long rs1, rs2, rd_val, gsr; + + maybe_flush_windows(RS1(insn), RS2(insn), RD(insn), 0); + rs1 = fetch_reg(RS1(insn), regs); + rs2 = fetch_reg(RS2(insn), regs); + rd_val = rs1 + rs2; + + store_reg(regs, rd_val, RD(insn)); + + gsr = current_thread_info()->gsr[0] & 0xffffffff; + gsr |= rd_val << 32UL; + current_thread_info()->gsr[0] = gsr; +} + +static void bshuffle(struct pt_regs *regs, unsigned int insn) +{ + struct fpustate *f = FPUSTATE; + unsigned long rs1, rs2, rd_val; + unsigned long bmask, i; + + bmask = current_thread_info()->gsr[0] >> 32UL; + + rs1 = fpd_regval(f, RS1(insn)); + rs2 = fpd_regval(f, RS2(insn)); + + rd_val = 0UL; + for (i = 0; i < 8; i++) { + unsigned long which = (bmask >> (i * 4)) & 0xf; + unsigned long byte; + + if (which < 8) + byte = (rs1 >> (which * 8)) & 0xff; + else + byte = (rs2 >> ((which-8)*8)) & 0xff; + rd_val |= (byte << (i * 8)); + } + + *fpd_regaddr(f, RD(insn)) = rd_val; +} + +static void pdist(struct pt_regs *regs, unsigned int insn) +{ + struct fpustate *f = FPUSTATE; + unsigned long rs1, rs2, *rd, rd_val; + unsigned long i; + + rs1 = fpd_regval(f, RS1(insn)); + rs2 = fpd_regval(f, RS1(insn)); + rd = fpd_regaddr(f, RD(insn)); + + rd_val = *rd; + + for (i = 0; i < 8; i++) { + s16 s1, s2; + + s1 = (rs1 >> (56 - (i * 8))) & 0xff; + s2 = (rs2 >> (56 - (i * 8))) & 0xff; + + /* Absolute value of difference. */ + s1 -= s2; + if (s1 < 0) + s1 = ~s1 + 1; + + rd_val += s1; + } + + *rd = rd_val; +} + +static void pformat(struct pt_regs *regs, unsigned int insn, unsigned int opf) +{ + struct fpustate *f = FPUSTATE; + unsigned long rs1, rs2, gsr, scale, rd_val; + + gsr = current_thread_info()->gsr[0]; + scale = (gsr >> 3) & (opf == FPACK16_OPF ? 0xf : 0x1f); + switch (opf) { + case FPACK16_OPF: { + unsigned long byte; + + rs2 = fpd_regval(f, RS2(insn)); + rd_val = 0; + for (byte = 0; byte < 4; byte++) { + unsigned int val; + s16 src = (rs2 >> (byte * 16UL)) & 0xffffUL; + int scaled = src << scale; + int from_fixed = scaled >> 7; + + val = ((from_fixed < 0) ? + 0 : + (from_fixed > 255) ? + 255 : from_fixed); + + rd_val |= (val << (8 * byte)); + } + *fps_regaddr(f, RD(insn)) = rd_val; + break; + } + + case FPACK32_OPF: { + unsigned long word; + + rs1 = fpd_regval(f, RS1(insn)); + rs2 = fpd_regval(f, RS2(insn)); + rd_val = (rs1 << 8) & ~(0x000000ff000000ffUL); + for (word = 0; word < 2; word++) { + unsigned long val; + s32 src = (rs2 >> (word * 32UL)); + s64 scaled = src << scale; + s64 from_fixed = scaled >> 23; + + val = ((from_fixed < 0) ? + 0 : + (from_fixed > 255) ? + 255 : from_fixed); + + rd_val |= (val << (32 * word)); + } + *fpd_regaddr(f, RD(insn)) = rd_val; + break; + } + + case FPACKFIX_OPF: { + unsigned long word; + + rs2 = fpd_regval(f, RS2(insn)); + + rd_val = 0; + for (word = 0; word < 2; word++) { + long val; + s32 src = (rs2 >> (word * 32UL)); + s64 scaled = src << scale; + s64 from_fixed = scaled >> 16; + + val = ((from_fixed < -32768) ? + -32768 : + (from_fixed > 32767) ? + 32767 : from_fixed); + + rd_val |= ((val & 0xffff) << (word * 16)); + } + *fps_regaddr(f, RD(insn)) = rd_val; + break; + } + + case FEXPAND_OPF: { + unsigned long byte; + + rs2 = fps_regval(f, RS2(insn)); + + rd_val = 0; + for (byte = 0; byte < 4; byte++) { + unsigned long val; + u8 src = (rs2 >> (byte * 8)) & 0xff; + + val = src << 4; + + rd_val |= (val << (byte * 16)); + } + *fpd_regaddr(f, RD(insn)) = rd_val; + break; + } + + case FPMERGE_OPF: { + rs1 = fps_regval(f, RS1(insn)); + rs2 = fps_regval(f, RS2(insn)); + + rd_val = (((rs2 & 0x000000ff) << 0) | + ((rs1 & 0x000000ff) << 8) | + ((rs2 & 0x0000ff00) << 8) | + ((rs1 & 0x0000ff00) << 16) | + ((rs2 & 0x00ff0000) << 16) | + ((rs1 & 0x00ff0000) << 24) | + ((rs2 & 0xff000000) << 24) | + ((rs1 & 0xff000000) << 32)); + *fpd_regaddr(f, RD(insn)) = rd_val; + break; + } + }; +} + +static void pmul(struct pt_regs *regs, unsigned int insn, unsigned int opf) +{ + struct fpustate *f = FPUSTATE; + unsigned long rs1, rs2, rd_val; + + switch (opf) { + case FMUL8x16_OPF: { + unsigned long byte; + + rs1 = fps_regval(f, RS1(insn)); + rs2 = fpd_regval(f, RS2(insn)); + + rd_val = 0; + for (byte = 0; byte < 4; byte++) { + u16 src1 = (rs1 >> (byte * 8)) & 0x00ff; + s16 src2 = (rs2 >> (byte * 16)) & 0xffff; + u32 prod = src1 * src2; + u16 scaled = ((prod & 0x00ffff00) >> 8); + + /* Round up. */ + if (prod & 0x80) + scaled++; + rd_val |= ((scaled & 0xffffUL) << (byte * 16UL)); + } + + *fpd_regaddr(f, RD(insn)) = rd_val; + break; + } + + case FMUL8x16AU_OPF: + case FMUL8x16AL_OPF: { + unsigned long byte; + s16 src2; + + rs1 = fps_regval(f, RS1(insn)); + rs2 = fps_regval(f, RS2(insn)); + + rd_val = 0; + src2 = (rs2 >> (opf == FMUL8x16AU_OPF) ? 16 : 0); + for (byte = 0; byte < 4; byte++) { + u16 src1 = (rs1 >> (byte * 8)) & 0x00ff; + u32 prod = src1 * src2; + u16 scaled = ((prod & 0x00ffff00) >> 8); + + /* Round up. */ + if (prod & 0x80) + scaled++; + rd_val |= ((scaled & 0xffffUL) << (byte * 16UL)); + } + + *fpd_regaddr(f, RD(insn)) = rd_val; + break; + } + + case FMUL8SUx16_OPF: + case FMUL8ULx16_OPF: { + unsigned long byte, ushift; + + rs1 = fpd_regval(f, RS1(insn)); + rs2 = fpd_regval(f, RS2(insn)); + + rd_val = 0; + ushift = (opf == FMUL8SUx16_OPF) ? 8 : 0; + for (byte = 0; byte < 4; byte++) { + u16 src1; + s16 src2; + u32 prod; + u16 scaled; + + src1 = ((rs1 >> ((16 * byte) + ushift)) & 0x00ff); + src2 = ((rs2 >> (16 * byte)) & 0xffff); + prod = src1 * src2; + scaled = ((prod & 0x00ffff00) >> 8); + + /* Round up. */ + if (prod & 0x80) + scaled++; + rd_val |= ((scaled & 0xffffUL) << (byte * 16UL)); + } + + *fpd_regaddr(f, RD(insn)) = rd_val; + break; + } + + case FMULD8SUx16_OPF: + case FMULD8ULx16_OPF: { + unsigned long byte, ushift; + + rs1 = fps_regval(f, RS1(insn)); + rs2 = fps_regval(f, RS2(insn)); + + rd_val = 0; + ushift = (opf == FMULD8SUx16_OPF) ? 8 : 0; + for (byte = 0; byte < 2; byte++) { + u16 src1; + s16 src2; + u32 prod; + u16 scaled; + + src1 = ((rs1 >> ((16 * byte) + ushift)) & 0x00ff); + src2 = ((rs2 >> (16 * byte)) & 0xffff); + prod = src1 * src2; + scaled = ((prod & 0x00ffff00) >> 8); + + /* Round up. */ + if (prod & 0x80) + scaled++; + rd_val |= ((scaled & 0xffffUL) << + ((byte * 32UL) + 7UL)); + } + *fpd_regaddr(f, RD(insn)) = rd_val; + break; + } + }; +} + +static void pcmp(struct pt_regs *regs, unsigned int insn, unsigned int opf) +{ + struct fpustate *f = FPUSTATE; + unsigned long rs1, rs2, rd_val, i; + + rs1 = fpd_regval(f, RS1(insn)); + rs2 = fpd_regval(f, RS2(insn)); + + rd_val = 0; + + switch (opf) { + case FCMPGT16_OPF: + for (i = 0; i < 4; i++) { + s16 a = (rs1 >> (i * 16)) & 0xffff; + s16 b = (rs2 >> (i * 16)) & 0xffff; + + if (a > b) + rd_val |= 1 << i; + } + break; + + case FCMPGT32_OPF: + for (i = 0; i < 2; i++) { + s32 a = (rs1 >> (i * 32)) & 0xffff; + s32 b = (rs2 >> (i * 32)) & 0xffff; + + if (a > b) + rd_val |= 1 << i; + } + break; + + case FCMPLE16_OPF: + for (i = 0; i < 4; i++) { + s16 a = (rs1 >> (i * 16)) & 0xffff; + s16 b = (rs2 >> (i * 16)) & 0xffff; + + if (a <= b) + rd_val |= 1 << i; + } + break; + + case FCMPLE32_OPF: + for (i = 0; i < 2; i++) { + s32 a = (rs1 >> (i * 32)) & 0xffff; + s32 b = (rs2 >> (i * 32)) & 0xffff; + + if (a <= b) + rd_val |= 1 << i; + } + break; + + case FCMPNE16_OPF: + for (i = 0; i < 4; i++) { + s16 a = (rs1 >> (i * 16)) & 0xffff; + s16 b = (rs2 >> (i * 16)) & 0xffff; + + if (a != b) + rd_val |= 1 << i; + } + break; + + case FCMPNE32_OPF: + for (i = 0; i < 2; i++) { + s32 a = (rs1 >> (i * 32)) & 0xffff; + s32 b = (rs2 >> (i * 32)) & 0xffff; + + if (a != b) + rd_val |= 1 << i; + } + break; + + case FCMPEQ16_OPF: + for (i = 0; i < 4; i++) { + s16 a = (rs1 >> (i * 16)) & 0xffff; + s16 b = (rs2 >> (i * 16)) & 0xffff; + + if (a == b) + rd_val |= 1 << i; + } + break; + + case FCMPEQ32_OPF: + for (i = 0; i < 2; i++) { + s32 a = (rs1 >> (i * 32)) & 0xffff; + s32 b = (rs2 >> (i * 32)) & 0xffff; + + if (a == b) + rd_val |= 1 << i; + } + break; + }; + + maybe_flush_windows(0, 0, RD(insn), 0); + store_reg(regs, rd_val, RD(insn)); +} + +/* Emulate the VIS instructions which are not implemented in + * hardware on Niagara. + */ +int vis_emul(struct pt_regs *regs, unsigned int insn) +{ + unsigned long pc = regs->tpc; + unsigned int opf; + + BUG_ON(regs->tstate & TSTATE_PRIV); + + if (test_thread_flag(TIF_32BIT)) + pc = (u32)pc; + + if (get_user(insn, (u32 __user *) pc)) + return -EFAULT; + + if ((insn & VIS_OPCODE_MASK) != VIS_OPCODE_VAL) + return -EINVAL; + + opf = (insn & VIS_OPF_MASK) >> VIS_OPF_SHIFT; + switch (opf) { + default: + return -EINVAL; + + /* Pixel Formatting Instructions. */ + case FPACK16_OPF: + case FPACK32_OPF: + case FPACKFIX_OPF: + case FEXPAND_OPF: + case FPMERGE_OPF: + pformat(regs, insn, opf); + break; + + /* Partitioned Multiply Instructions */ + case FMUL8x16_OPF: + case FMUL8x16AU_OPF: + case FMUL8x16AL_OPF: + case FMUL8SUx16_OPF: + case FMUL8ULx16_OPF: + case FMULD8SUx16_OPF: + case FMULD8ULx16_OPF: + pmul(regs, insn, opf); + break; + + /* Pixel Compare Instructions */ + case FCMPGT16_OPF: + case FCMPGT32_OPF: + case FCMPLE16_OPF: + case FCMPLE32_OPF: + case FCMPNE16_OPF: + case FCMPNE32_OPF: + case FCMPEQ16_OPF: + case FCMPEQ32_OPF: + pcmp(regs, insn, opf); + break; + + /* Edge Handling Instructions */ + case EDGE8_OPF: + case EDGE8N_OPF: + case EDGE8L_OPF: + case EDGE8LN_OPF: + case EDGE16_OPF: + case EDGE16N_OPF: + case EDGE16L_OPF: + case EDGE16LN_OPF: + case EDGE32_OPF: + case EDGE32N_OPF: + case EDGE32L_OPF: + case EDGE32LN_OPF: + edge(regs, insn, opf); + break; + + /* Pixel Component Distance */ + case PDIST_OPF: + pdist(regs, insn); + break; + + /* Three-Dimensional Array Addressing Instructions */ + case ARRAY8_OPF: + case ARRAY16_OPF: + case ARRAY32_OPF: + array(regs, insn, opf); + break; + + /* Byte Mask and Shuffle Instructions */ + case BMASK_OPF: + bmask(regs, insn); + break; + + case BSHUFFLE_OPF: + bshuffle(regs, insn); + break; + }; + + regs->tpc = regs->tnpc; + regs->tnpc += 4; + return 0; +} -- cgit v1.2.3-18-g5258 From 7a1ac5264108fc3ed22d17a3cdd76212ed1666d1 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 16 Mar 2006 02:02:32 -0800 Subject: [SPARC64]: Fix and re-enable dynamic TSB sizing. This is good for up to %50 performance improvement of some test cases. The problem has been the race conditions, and hopefully I've plugged them all up here. 1) There was a serious race in switch_mm() wrt. lazy TLB switching to and from kernel threads. We could erroneously skip a tsb_context_switch() and thus use a stale TSB across a TSB grow event. There is a big comment now in that function describing exactly how it can happen. 2) All code paths that do something with the TSB need to be guarded with the mm->context.lock spinlock. This makes page table flushing paths properly synchronize with both TSB growing and TLB context changes. 3) TSB growing events are moved to the end of successful fault processing. Previously it was in update_mmu_cache() but that is deadlock prone. At the end of do_sparc64_fault() we hold no spinlocks that could deadlock the TSB grow sequence. We also have dropped the address space semaphore. While we're here, add prefetching to the copy_tsb() routine and put it in assembler into the tsb.S file. This piece of code is quite time critical. There are some small negative side effects to this code which can be improved upon. In particular we grab the mm->context.lock even for the tsb insert done by update_mmu_cache() now and that's a bit excessive. We can get rid of that locking, and the same lock taking in flush_tsb_user(), by disabling PSTATE_IE around the whole operation including the capturing of the tsb pointer and tsb_nentries value. That would work because anyone growing the TSB won't free up the old TSB until all cpus respond to the TSB change cross call. I'm not quite so confident in that optimization to put it in right now, but eventually we might be able to and the description is here for reference. This code seems very solid now. It passes several parallel GCC bootstrap builds, and our favorite "nut cruncher" stress test which is a full "make -j8192" build of a "make allmodconfig" kernel. That puts about 256 processes on each cpu's run queue, makes lots of process cpu migrations occur, causes lots of page table and TLB flushing activity, incurs many context version number changes, and it swaps the machine real far out to disk even though there is 16GB of ram on this test system. :-) Signed-off-by: David S. Miller --- arch/sparc64/kernel/tsb.S | 71 +++++++++++++++++- arch/sparc64/mm/fault.c | 8 +- arch/sparc64/mm/init.c | 7 +- arch/sparc64/mm/tsb.c | 185 ++++++++++++++++++++-------------------------- 4 files changed, 165 insertions(+), 106 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/tsb.S b/arch/sparc64/kernel/tsb.S index d738910153f..1b154c86362 100644 --- a/arch/sparc64/kernel/tsb.S +++ b/arch/sparc64/kernel/tsb.S @@ -34,8 +34,9 @@ tsb_miss_itlb: ldxa [%g4] ASI_IMMU, %g4 /* At this point we have: - * %g4 -- missing virtual address * %g1 -- TSB entry address + * %g3 -- FAULT_CODE_{D,I}TLB + * %g4 -- missing virtual address * %g6 -- TAG TARGET (vaddr >> 22) */ tsb_miss_page_table_walk: @@ -45,6 +46,12 @@ tsb_miss_page_table_walk: tsb_miss_page_table_walk_sun4v_fastpath: USER_PGTABLE_WALK_TL1(%g4, %g7, %g5, %g2, tsb_do_fault) + /* At this point we have: + * %g1 -- TSB entry address + * %g3 -- FAULT_CODE_{D,I}TLB + * %g5 -- physical address of PTE in Linux page tables + * %g6 -- TAG TARGET (vaddr >> 22) + */ tsb_reload: TSB_LOCK_TAG(%g1, %g2, %g7) @@ -199,6 +206,7 @@ __tsb_insert: wrpr %o5, %pstate retl nop + .size __tsb_insert, .-__tsb_insert /* Flush the given TSB entry if it has the matching * tag. @@ -208,6 +216,7 @@ __tsb_insert: */ .align 32 .globl tsb_flush + .type tsb_flush,#function tsb_flush: sethi %hi(TSB_TAG_LOCK_HIGH), %g2 1: TSB_LOAD_TAG(%o0, %g1) @@ -225,6 +234,7 @@ tsb_flush: nop 2: retl TSB_MEMBAR + .size tsb_flush, .-tsb_flush /* Reload MMU related context switch state at * schedule() time. @@ -241,6 +251,7 @@ tsb_flush: */ .align 32 .globl __tsb_context_switch + .type __tsb_context_switch,#function __tsb_context_switch: rdpr %pstate, %o5 wrpr %o5, PSTATE_IE, %pstate @@ -302,3 +313,61 @@ __tsb_context_switch: retl nop + .size __tsb_context_switch, .-__tsb_context_switch + +#define TSB_PASS_BITS ((1 << TSB_TAG_LOCK_BIT) | \ + (1 << TSB_TAG_INVALID_BIT)) + + .align 32 + .globl copy_tsb + .type copy_tsb,#function +copy_tsb: /* %o0=old_tsb_base, %o1=old_tsb_size + * %o2=new_tsb_base, %o3=new_tsb_size + */ + sethi %uhi(TSB_PASS_BITS), %g7 + srlx %o3, 4, %o3 + add %o0, %o1, %g1 /* end of old tsb */ + sllx %g7, 32, %g7 + sub %o3, 1, %o3 /* %o3 == new tsb hash mask */ + +661: prefetcha [%o0] ASI_N, #one_read + .section .tsb_phys_patch, "ax" + .word 661b + prefetcha [%o0] ASI_PHYS_USE_EC, #one_read + .previous + +90: andcc %o0, (64 - 1), %g0 + bne 1f + add %o0, 64, %o5 + +661: prefetcha [%o5] ASI_N, #one_read + .section .tsb_phys_patch, "ax" + .word 661b + prefetcha [%o5] ASI_PHYS_USE_EC, #one_read + .previous + +1: TSB_LOAD_QUAD(%o0, %g2) /* %g2/%g3 == TSB entry */ + andcc %g2, %g7, %g0 /* LOCK or INVALID set? */ + bne,pn %xcc, 80f /* Skip it */ + sllx %g2, 22, %o4 /* TAG --> VADDR */ + + /* This can definitely be computed faster... */ + srlx %o0, 4, %o5 /* Build index */ + and %o5, 511, %o5 /* Mask index */ + sllx %o5, PAGE_SHIFT, %o5 /* Put into vaddr position */ + or %o4, %o5, %o4 /* Full VADDR. */ + srlx %o4, PAGE_SHIFT, %o4 /* Shift down to create index */ + and %o4, %o3, %o4 /* Mask with new_tsb_nents-1 */ + sllx %o4, 4, %o4 /* Shift back up into tsb ent offset */ + TSB_STORE(%o2 + %o4, %g2) /* Store TAG */ + add %o4, 0x8, %o4 /* Advance to TTE */ + TSB_STORE(%o2 + %o4, %g3) /* Store TTE */ + +80: add %o0, 16, %o0 + cmp %o0, %g1 + bne,pt %xcc, 90b + nop + + retl + TSB_MEMBAR + .size copy_tsb, .-copy_tsb diff --git a/arch/sparc64/mm/fault.c b/arch/sparc64/mm/fault.c index b97bd054aad..63b6cc0cd5d 100644 --- a/arch/sparc64/mm/fault.c +++ b/arch/sparc64/mm/fault.c @@ -29,6 +29,7 @@ #include #include #include +#include /* * To debug kernel to catch accesses to certain virtual/physical addresses. @@ -258,7 +259,7 @@ asmlinkage void __kprobes do_sparc64_fault(struct pt_regs *regs) struct vm_area_struct *vma; unsigned int insn = 0; int si_code, fault_code; - unsigned long address; + unsigned long address, mm_rss; fault_code = get_thread_fault_code(); @@ -407,6 +408,11 @@ good_area: } up_read(&mm->mmap_sem); + + mm_rss = get_mm_rss(mm); + if (unlikely(mm_rss >= mm->context.tsb_rss_limit)) + tsb_grow(mm, mm_rss); + return; /* diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index b40f6477dea..d703b67bc7b 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -279,7 +279,7 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t p { struct mm_struct *mm; struct tsb *tsb; - unsigned long tag; + unsigned long tag, flags; if (tlb_type != hypervisor) { unsigned long pfn = pte_pfn(pte); @@ -308,10 +308,15 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t p } mm = vma->vm_mm; + + spin_lock_irqsave(&mm->context.lock, flags); + tsb = &mm->context.tsb[(address >> PAGE_SHIFT) & (mm->context.tsb_nentries - 1UL)]; tag = (address >> 22UL); tsb_insert(tsb, tag, pte_val(pte)); + + spin_unlock_irqrestore(&mm->context.lock, flags); } void flush_dcache_page(struct page *page) diff --git a/arch/sparc64/mm/tsb.c b/arch/sparc64/mm/tsb.c index f36799b7152..7fbe1e0cd10 100644 --- a/arch/sparc64/mm/tsb.c +++ b/arch/sparc64/mm/tsb.c @@ -48,11 +48,15 @@ void flush_tsb_kernel_range(unsigned long start, unsigned long end) void flush_tsb_user(struct mmu_gather *mp) { struct mm_struct *mm = mp->mm; - struct tsb *tsb = mm->context.tsb; - unsigned long nentries = mm->context.tsb_nentries; - unsigned long base; + unsigned long nentries, base, flags; + struct tsb *tsb; int i; + spin_lock_irqsave(&mm->context.lock, flags); + + tsb = mm->context.tsb; + nentries = mm->context.tsb_nentries; + if (tlb_type == cheetah_plus || tlb_type == hypervisor) base = __pa(tsb); else @@ -70,6 +74,8 @@ void flush_tsb_user(struct mmu_gather *mp) tsb_flush(ent, tag); } + + spin_unlock_irqrestore(&mm->context.lock, flags); } static void setup_tsb_params(struct mm_struct *mm, unsigned long tsb_bytes) @@ -201,86 +207,9 @@ static void setup_tsb_params(struct mm_struct *mm, unsigned long tsb_bytes) } } -/* The page tables are locked against modifications while this - * runs. - * - * XXX do some prefetching... - */ -static void copy_tsb(struct tsb *old_tsb, unsigned long old_size, - struct tsb *new_tsb, unsigned long new_size) -{ - unsigned long old_nentries = old_size / sizeof(struct tsb); - unsigned long new_nentries = new_size / sizeof(struct tsb); - unsigned long i; - - for (i = 0; i < old_nentries; i++) { - register unsigned long tag asm("o4"); - register unsigned long pte asm("o5"); - unsigned long v, hash; - - if (tlb_type == hypervisor) { - __asm__ __volatile__( - "ldda [%2] %3, %0" - : "=r" (tag), "=r" (pte) - : "r" (__pa(&old_tsb[i])), - "i" (ASI_QUAD_LDD_PHYS_4V)); - } else if (tlb_type == cheetah_plus) { - __asm__ __volatile__( - "ldda [%2] %3, %0" - : "=r" (tag), "=r" (pte) - : "r" (__pa(&old_tsb[i])), - "i" (ASI_QUAD_LDD_PHYS)); - } else { - __asm__ __volatile__( - "ldda [%2] %3, %0" - : "=r" (tag), "=r" (pte) - : "r" (&old_tsb[i]), - "i" (ASI_NUCLEUS_QUAD_LDD)); - } - - if (tag & ((1UL << TSB_TAG_LOCK_BIT) | - (1UL << TSB_TAG_INVALID_BIT))) - continue; - - /* We only put base page size PTEs into the TSB, - * but that might change in the future. This code - * would need to be changed if we start putting larger - * page size PTEs into there. - */ - WARN_ON((pte & _PAGE_ALL_SZ_BITS) != _PAGE_SZBITS); - - /* The tag holds bits 22 to 63 of the virtual address - * and the context. Clear out the context, and shift - * up to make a virtual address. - */ - v = (tag & ((1UL << 42UL) - 1UL)) << 22UL; - - /* The implied bits of the tag (bits 13 to 21) are - * determined by the TSB entry index, so fill that in. - */ - v |= (i & (512UL - 1UL)) << 13UL; - - hash = tsb_hash(v, new_nentries); - if (tlb_type == cheetah_plus || - tlb_type == hypervisor) { - __asm__ __volatile__( - "stxa %0, [%1] %2\n\t" - "stxa %3, [%4] %2" - : /* no outputs */ - : "r" (tag), - "r" (__pa(&new_tsb[hash].tag)), - "i" (ASI_PHYS_USE_EC), - "r" (pte), - "r" (__pa(&new_tsb[hash].pte))); - } else { - new_tsb[hash].tag = tag; - new_tsb[hash].pte = pte; - } - } -} - /* When the RSS of an address space exceeds mm->context.tsb_rss_limit, - * update_mmu_cache() invokes this routine to try and grow the TSB. + * do_sparc64_fault() invokes this routine to try and grow the TSB. + * * When we reach the maximum TSB size supported, we stick ~0UL into * mm->context.tsb_rss_limit so the grow checks in update_mmu_cache() * will not trigger any longer. @@ -293,12 +222,12 @@ static void copy_tsb(struct tsb *old_tsb, unsigned long old_size, * the number of entries that the current TSB can hold at once. Currently, * we trigger when the RSS hits 3/4 of the TSB capacity. */ -void tsb_grow(struct mm_struct *mm, unsigned long rss, gfp_t gfp_flags) +void tsb_grow(struct mm_struct *mm, unsigned long rss) { unsigned long max_tsb_size = 1 * 1024 * 1024; - unsigned long size, old_size; + unsigned long size, old_size, flags; struct page *page; - struct tsb *old_tsb; + struct tsb *old_tsb, *new_tsb; if (max_tsb_size > (PAGE_SIZE << MAX_ORDER)) max_tsb_size = (PAGE_SIZE << MAX_ORDER); @@ -311,12 +240,51 @@ void tsb_grow(struct mm_struct *mm, unsigned long rss, gfp_t gfp_flags) break; } - page = alloc_pages(gfp_flags, get_order(size)); + page = alloc_pages(GFP_KERNEL, get_order(size)); if (unlikely(!page)) return; /* Mark all tags as invalid. */ - memset(page_address(page), 0x40, size); + new_tsb = page_address(page); + memset(new_tsb, 0x40, size); + + /* Ok, we are about to commit the changes. If we are + * growing an existing TSB the locking is very tricky, + * so WATCH OUT! + * + * We have to hold mm->context.lock while committing to the + * new TSB, this synchronizes us with processors in + * flush_tsb_user() and switch_mm() for this address space. + * + * But even with that lock held, processors run asynchronously + * accessing the old TSB via TLB miss handling. This is OK + * because those actions are just propagating state from the + * Linux page tables into the TSB, page table mappings are not + * being changed. If a real fault occurs, the processor will + * synchronize with us when it hits flush_tsb_user(), this is + * also true for the case where vmscan is modifying the page + * tables. The only thing we need to be careful with is to + * skip any locked TSB entries during copy_tsb(). + * + * When we finish committing to the new TSB, we have to drop + * the lock and ask all other cpus running this address space + * to run tsb_context_switch() to see the new TSB table. + */ + spin_lock_irqsave(&mm->context.lock, flags); + + old_tsb = mm->context.tsb; + old_size = mm->context.tsb_nentries * sizeof(struct tsb); + + /* Handle multiple threads trying to grow the TSB at the same time. + * One will get in here first, and bump the size and the RSS limit. + * The others will get in here next and hit this check. + */ + if (unlikely(old_tsb && (rss < mm->context.tsb_rss_limit))) { + spin_unlock_irqrestore(&mm->context.lock, flags); + + free_pages((unsigned long) new_tsb, get_order(size)); + return; + } if (size == max_tsb_size) mm->context.tsb_rss_limit = ~0UL; @@ -324,30 +292,37 @@ void tsb_grow(struct mm_struct *mm, unsigned long rss, gfp_t gfp_flags) mm->context.tsb_rss_limit = ((size / sizeof(struct tsb)) * 3) / 4; - old_tsb = mm->context.tsb; - old_size = mm->context.tsb_nentries * sizeof(struct tsb); - - if (old_tsb) - copy_tsb(old_tsb, old_size, page_address(page), size); + if (old_tsb) { + extern void copy_tsb(unsigned long old_tsb_base, + unsigned long old_tsb_size, + unsigned long new_tsb_base, + unsigned long new_tsb_size); + unsigned long old_tsb_base = (unsigned long) old_tsb; + unsigned long new_tsb_base = (unsigned long) new_tsb; + + if (tlb_type == cheetah_plus || tlb_type == hypervisor) { + old_tsb_base = __pa(old_tsb_base); + new_tsb_base = __pa(new_tsb_base); + } + copy_tsb(old_tsb_base, old_size, new_tsb_base, size); + } - mm->context.tsb = page_address(page); + mm->context.tsb = new_tsb; setup_tsb_params(mm, size); + spin_unlock_irqrestore(&mm->context.lock, flags); + /* If old_tsb is NULL, we're being invoked for the first time * from init_new_context(). */ if (old_tsb) { - /* Now force all other processors to reload the new - * TSB state. - */ - smp_tsb_sync(mm); - - /* Finally reload it on the local cpu. No further - * references will remain to the old TSB and we can - * thus free it up. - */ + /* Reload it on the local cpu. */ tsb_context_switch(mm); + /* Now force other processors to do the same. */ + smp_tsb_sync(mm); + + /* Now it is safe to free the old tsb. */ free_pages((unsigned long) old_tsb, get_order(old_size)); } } @@ -363,7 +338,11 @@ int init_new_context(struct task_struct *tsk, struct mm_struct *mm) * will be confused and think there is an older TSB to free up. */ mm->context.tsb = NULL; - tsb_grow(mm, 0, GFP_KERNEL); + + /* If this is fork, inherit the parent's TSB size. We would + * grow it to that size on the first page fault anyways. + */ + tsb_grow(mm, get_mm_rss(mm)); if (unlikely(!mm->context.tsb)) return -ENOMEM; -- cgit v1.2.3-18-g5258 From a91690ddd05ab0b7fbdd37733875525ac75c20f2 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 17 Mar 2006 14:41:03 -0800 Subject: [SPARC64]: Top-down address space allocation for 32-bit tasks. Currently allocations are very constrained for 32-bit processes. It grows down-up from 0x70000000 to 0xf0000000 which gives about 2GB of stack + dynamic mmap() space. So support the top-down method, and we need to override the generic helper function in order to deal with D-cache coloring. With these changes I was able to squeeze out a mmap() just over 3.6GB in size in a 32-bit process. Signed-off-by: David S. Miller --- arch/sparc64/kernel/binfmt_aout32.c | 2 + arch/sparc64/kernel/sys_sparc.c | 190 ++++++++++++++++++++++++++++++++++-- 2 files changed, 183 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/binfmt_aout32.c b/arch/sparc64/kernel/binfmt_aout32.c index cb9ecd0172c..d7caa60a007 100644 --- a/arch/sparc64/kernel/binfmt_aout32.c +++ b/arch/sparc64/kernel/binfmt_aout32.c @@ -239,6 +239,8 @@ static int load_aout32_binary(struct linux_binprm * bprm, struct pt_regs * regs) (current->mm->start_data = N_DATADDR(ex)); current->mm->brk = ex.a_bss + (current->mm->start_brk = N_BSSADDR(ex)); + current->mm->free_area_cache = current->mm->mmap_base; + current->mm->cached_hole_size = 0; current->mm->mmap = NULL; compute_creds(bprm); diff --git a/arch/sparc64/kernel/sys_sparc.c b/arch/sparc64/kernel/sys_sparc.c index 8840415408b..61dffb9349b 100644 --- a/arch/sparc64/kernel/sys_sparc.c +++ b/arch/sparc64/kernel/sys_sparc.c @@ -82,9 +82,34 @@ static inline int straddles_64bit_va_hole(unsigned long start, unsigned long end return 1; } -#define COLOUR_ALIGN(addr,pgoff) \ - ((((addr)+SHMLBA-1)&~(SHMLBA-1)) + \ - (((pgoff)< task_size || len >= VA_EXCLUDE_START) + if (unlikely(len > task_size || len >= VA_EXCLUDE_START)) return -ENOMEM; do_color_align = 0; @@ -125,11 +150,12 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, unsi return addr; } - if (len <= mm->cached_hole_size) { + if (len > mm->cached_hole_size) { + start_addr = addr = mm->free_area_cache; + } else { + start_addr = addr = TASK_UNMAPPED_BASE; mm->cached_hole_size = 0; - mm->free_area_cache = TASK_UNMAPPED_BASE; } - start_addr = addr = mm->free_area_cache; task_size -= len; @@ -146,7 +172,7 @@ full_search: addr = VA_EXCLUDE_END; vma = find_vma(mm, VA_EXCLUDE_END); } - if (task_size < addr) { + if (unlikely(task_size < addr)) { if (start_addr != TASK_UNMAPPED_BASE) { start_addr = addr = TASK_UNMAPPED_BASE; mm->cached_hole_size = 0; @@ -154,7 +180,7 @@ full_search: } return -ENOMEM; } - if (!vma || addr + len <= vma->vm_start) { + if (likely(!vma || addr + len <= vma->vm_start)) { /* * Remember the place where we stopped the search: */ @@ -170,6 +196,121 @@ full_search: } } +unsigned long +arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, + const unsigned long len, const unsigned long pgoff, + const unsigned long flags) +{ + struct vm_area_struct *vma; + struct mm_struct *mm = current->mm; + unsigned long task_size = 0xf0000000UL; + unsigned long addr = addr0; + int do_color_align; + + /* This should only ever run for 32-bit processes. */ + BUG_ON(!test_thread_flag(TIF_32BIT)); + + if (flags & MAP_FIXED) { + /* We do not accept a shared mapping if it would violate + * cache aliasing constraints. + */ + if ((flags & MAP_SHARED) && + ((addr - (pgoff << PAGE_SHIFT)) & (SHMLBA - 1))) + return -EINVAL; + return addr; + } + + if (unlikely(len > task_size)) + return -ENOMEM; + + do_color_align = 0; + if (filp || (flags & MAP_SHARED)) + do_color_align = 1; + + /* requesting a specific address */ + if (addr) { + if (do_color_align) + addr = COLOUR_ALIGN(addr, pgoff); + else + addr = PAGE_ALIGN(addr); + + vma = find_vma(mm, addr); + if (task_size - len >= addr && + (!vma || addr + len <= vma->vm_start)) + return addr; + } + + /* check if free_area_cache is useful for us */ + if (len <= mm->cached_hole_size) { + mm->cached_hole_size = 0; + mm->free_area_cache = mm->mmap_base; + } + + /* either no address requested or can't fit in requested address hole */ + addr = mm->free_area_cache; + if (do_color_align) { + unsigned long base = COLOUR_ALIGN_DOWN(addr-len, pgoff); + + addr = base + len; + } + + /* make sure it can fit in the remaining address space */ + if (likely(addr > len)) { + vma = find_vma(mm, addr-len); + if (!vma || addr <= vma->vm_start) { + /* remember the address as a hint for next time */ + return (mm->free_area_cache = addr-len); + } + } + + if (unlikely(mm->mmap_base < len)) + goto bottomup; + + addr = mm->mmap_base-len; + if (do_color_align) + addr = COLOUR_ALIGN_DOWN(addr, pgoff); + + do { + /* + * Lookup failure means no vma is above this address, + * else if new region fits below vma->vm_start, + * return with success: + */ + vma = find_vma(mm, addr); + if (likely(!vma || addr+len <= vma->vm_start)) { + /* remember the address as a hint for next time */ + return (mm->free_area_cache = addr); + } + + /* remember the largest hole we saw so far */ + if (addr + mm->cached_hole_size < vma->vm_start) + mm->cached_hole_size = vma->vm_start - addr; + + /* try just below the current vma->vm_start */ + addr = vma->vm_start-len; + if (do_color_align) + addr = COLOUR_ALIGN_DOWN(addr, pgoff); + } while (likely(len < vma->vm_start)); + +bottomup: + /* + * A failed mmap() very likely causes application failure, + * so fall back to the bottom-up function here. This scenario + * can happen with large stack limits and large mmap() + * allocations. + */ + mm->cached_hole_size = ~0UL; + mm->free_area_cache = TASK_UNMAPPED_BASE; + addr = arch_get_unmapped_area(filp, addr0, len, pgoff, flags); + /* + * Restore the topdown base: + */ + mm->free_area_cache = mm->mmap_base; + mm->cached_hole_size = ~0UL; + + return addr; +} + /* Try to align mapping such that we align it as much as possible. */ unsigned long get_fb_unmapped_area(struct file *filp, unsigned long orig_addr, unsigned long len, unsigned long pgoff, unsigned long flags) { @@ -213,6 +354,37 @@ unsigned long get_fb_unmapped_area(struct file *filp, unsigned long orig_addr, u return addr; } +/* Essentially the same as PowerPC... */ +void arch_pick_mmap_layout(struct mm_struct *mm) +{ + /* + * Fall back to the standard layout if the personality + * bit is set, or if the expected stack growth is unlimited: + */ + if (!test_thread_flag(TIF_32BIT) || + (current->personality & ADDR_COMPAT_LAYOUT) || + current->signal->rlim[RLIMIT_STACK].rlim_cur == RLIM_INFINITY || + sysctl_legacy_va_layout) { + mm->mmap_base = TASK_UNMAPPED_BASE; + mm->get_unmapped_area = arch_get_unmapped_area; + mm->unmap_area = arch_unmap_area; + } else { + /* We know it's 32-bit */ + unsigned long task_size = 0xf0000000UL; + unsigned long gap; + + gap = current->signal->rlim[RLIMIT_STACK].rlim_cur; + if (gap < 128 * 1024 * 1024) + gap = 128 * 1024 * 1024; + if (gap > (task_size / 6 * 5)) + gap = (task_size / 6 * 5); + + mm->mmap_base = task_size - (gap & PAGE_MASK); + mm->get_unmapped_area = arch_get_unmapped_area_topdown; + mm->unmap_area = arch_unmap_area_topdown; + } +} + asmlinkage unsigned long sparc_brk(unsigned long brk) { /* People could try to be nasty and use ta 0x6d in 32bit programs */ -- cgit v1.2.3-18-g5258 From d61e16df940e02e25679bdc1aee8c25786f6de90 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 17 Mar 2006 17:33:56 -0800 Subject: [SPARC64]: Increase top of 32-bit process stack. Put it one page below the top of the 32-bit address space. This gives us ~16MB more address space to work with. Signed-off-by: David S. Miller --- arch/sparc64/kernel/binfmt_elf32.c | 4 +++- arch/sparc64/kernel/sys_sparc.c | 13 +++++++------ arch/sparc64/kernel/sys_sparc32.c | 9 +++++---- arch/sparc64/solaris/misc.c | 4 ++-- 4 files changed, 17 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/binfmt_elf32.c b/arch/sparc64/kernel/binfmt_elf32.c index a1a12d2aa35..8a2abcce273 100644 --- a/arch/sparc64/kernel/binfmt_elf32.c +++ b/arch/sparc64/kernel/binfmt_elf32.c @@ -153,7 +153,9 @@ MODULE_AUTHOR("Eric Youngdale, David S. Miller, Jakub Jelinek"); #undef MODULE_DESCRIPTION #undef MODULE_AUTHOR +#include + #undef TASK_SIZE -#define TASK_SIZE 0xf0000000 +#define TASK_SIZE STACK_TOP32 #include "../../../fs/binfmt_elf.c" diff --git a/arch/sparc64/kernel/sys_sparc.c b/arch/sparc64/kernel/sys_sparc.c index 61dffb9349b..9019b41fc02 100644 --- a/arch/sparc64/kernel/sys_sparc.c +++ b/arch/sparc64/kernel/sys_sparc.c @@ -30,6 +30,7 @@ #include #include #include +#include /* #define DEBUG_UNIMP_SYSCALL */ @@ -130,7 +131,7 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, unsi } if (test_thread_flag(TIF_32BIT)) - task_size = 0xf0000000UL; + task_size = STACK_TOP32; if (unlikely(len > task_size || len >= VA_EXCLUDE_START)) return -ENOMEM; @@ -203,7 +204,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, { struct vm_area_struct *vma; struct mm_struct *mm = current->mm; - unsigned long task_size = 0xf0000000UL; + unsigned long task_size = STACK_TOP32; unsigned long addr = addr0; int do_color_align; @@ -370,7 +371,7 @@ void arch_pick_mmap_layout(struct mm_struct *mm) mm->unmap_area = arch_unmap_area; } else { /* We know it's 32-bit */ - unsigned long task_size = 0xf0000000UL; + unsigned long task_size = STACK_TOP32; unsigned long gap; gap = current->signal->rlim[RLIMIT_STACK].rlim_cur; @@ -388,7 +389,7 @@ void arch_pick_mmap_layout(struct mm_struct *mm) asmlinkage unsigned long sparc_brk(unsigned long brk) { /* People could try to be nasty and use ta 0x6d in 32bit programs */ - if (test_thread_flag(TIF_32BIT) && brk >= 0xf0000000UL) + if (test_thread_flag(TIF_32BIT) && brk >= STACK_TOP32) return current->mm->brk; if (unlikely(straddles_64bit_va_hole(current->mm->brk, brk))) @@ -554,10 +555,10 @@ asmlinkage unsigned long sys_mmap(unsigned long addr, unsigned long len, retval = -EINVAL; if (test_thread_flag(TIF_32BIT)) { - if (len >= 0xf0000000UL) + if (len >= STACK_TOP32) goto out_putf; - if ((flags & MAP_FIXED) && addr > 0xf0000000UL - len) + if ((flags & MAP_FIXED) && addr > STACK_TOP32 - len) goto out_putf; } else { if (len >= VA_EXCLUDE_START) diff --git a/arch/sparc64/kernel/sys_sparc32.c b/arch/sparc64/kernel/sys_sparc32.c index 417727bd87b..0e41df02448 100644 --- a/arch/sparc64/kernel/sys_sparc32.c +++ b/arch/sparc64/kernel/sys_sparc32.c @@ -62,6 +62,7 @@ #include #include #include +#include asmlinkage long sys32_chown16(const char __user * filename, u16 user, u16 group) { @@ -1039,15 +1040,15 @@ asmlinkage unsigned long sys32_mremap(unsigned long addr, unsigned long ret = -EINVAL; unsigned long new_addr = __new_addr; - if (old_len > 0xf0000000UL || new_len > 0xf0000000UL) + if (old_len > STACK_TOP32 || new_len > STACK_TOP32) goto out; - if (addr > 0xf0000000UL - old_len) + if (addr > STACK_TOP32 - old_len) goto out; down_write(¤t->mm->mmap_sem); if (flags & MREMAP_FIXED) { - if (new_addr > 0xf0000000UL - new_len) + if (new_addr > STACK_TOP32 - new_len) goto out_sem; - } else if (addr > 0xf0000000UL - new_len) { + } else if (addr > STACK_TOP32 - new_len) { unsigned long map_flags = 0; struct file *file = NULL; diff --git a/arch/sparc64/solaris/misc.c b/arch/sparc64/solaris/misc.c index 3ab4677395f..5284996780a 100644 --- a/arch/sparc64/solaris/misc.c +++ b/arch/sparc64/solaris/misc.c @@ -90,7 +90,7 @@ static u32 do_solaris_mmap(u32 addr, u32 len, u32 prot, u32 flags, u32 fd, u64 o len = PAGE_ALIGN(len); if(!(flags & MAP_FIXED)) addr = 0; - else if (len > 0xf0000000UL || addr > 0xf0000000UL - len) + else if (len > STACK_TOP32 || addr > STACK_TOP32 - len) goto out_putf; ret_type = flags & _MAP_NEW; flags &= ~_MAP_NEW; @@ -102,7 +102,7 @@ static u32 do_solaris_mmap(u32 addr, u32 len, u32 prot, u32 flags, u32 fd, u64 o (unsigned long) prot, (unsigned long) flags, off); up_write(¤t->mm->mmap_sem); if(!ret_type) - retval = ((retval < 0xf0000000) ? 0 : retval); + retval = ((retval < STACK_TOP32) ? 0 : retval); out_putf: if (file) -- cgit v1.2.3-18-g5258 From 05f9ca83596c7801549a2b4eba469d51baf5480f Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 17 Mar 2006 17:42:57 -0800 Subject: [SPARC64]: Randomize mm->mmap_base when PF_RANDOMIZE is set. Signed-off-by: David S. Miller --- arch/sparc64/kernel/sys_sparc.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/sys_sparc.c b/arch/sparc64/kernel/sys_sparc.c index 9019b41fc02..7a869138c37 100644 --- a/arch/sparc64/kernel/sys_sparc.c +++ b/arch/sparc64/kernel/sys_sparc.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include @@ -358,6 +359,17 @@ unsigned long get_fb_unmapped_area(struct file *filp, unsigned long orig_addr, u /* Essentially the same as PowerPC... */ void arch_pick_mmap_layout(struct mm_struct *mm) { + unsigned long random_factor = 0UL; + + if (current->flags & PF_RANDOMIZE) { + random_factor = get_random_int(); + if (test_thread_flag(TIF_32BIT)) + random_factor &= ((1 * 1024 * 1024) - 1); + else + random_factor = ((random_factor << PAGE_SHIFT) & + 0xffffffffUL); + } + /* * Fall back to the standard layout if the personality * bit is set, or if the expected stack growth is unlimited: @@ -366,7 +378,7 @@ void arch_pick_mmap_layout(struct mm_struct *mm) (current->personality & ADDR_COMPAT_LAYOUT) || current->signal->rlim[RLIMIT_STACK].rlim_cur == RLIM_INFINITY || sysctl_legacy_va_layout) { - mm->mmap_base = TASK_UNMAPPED_BASE; + mm->mmap_base = TASK_UNMAPPED_BASE + random_factor; mm->get_unmapped_area = arch_get_unmapped_area; mm->unmap_area = arch_unmap_area; } else { @@ -380,7 +392,7 @@ void arch_pick_mmap_layout(struct mm_struct *mm) if (gap > (task_size / 6 * 5)) gap = (task_size / 6 * 5); - mm->mmap_base = task_size - (gap & PAGE_MASK); + mm->mmap_base = PAGE_ALIGN(task_size - gap - random_factor); mm->get_unmapped_area = arch_get_unmapped_area_topdown; mm->unmap_area = arch_unmap_area_topdown; } -- cgit v1.2.3-18-g5258 From b52439c22c63dbbefd5395f2151c0ef4f667e949 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 17 Mar 2006 23:40:47 -0800 Subject: [SPARC64]: Don't kill the page allocator when growing a TSB. Try only lightly on > 1 order allocations. If a grow fails, we are under memory pressure, so do not try to grow the TSB for this address space any more. If a > 0 order TSB allocation fails on a new fork, retry using a 0 order allocation. Signed-off-by: David S. Miller --- arch/sparc64/mm/tsb.c | 43 +++++++++++++++++++++++++++++++++++-------- 1 file changed, 35 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/mm/tsb.c b/arch/sparc64/mm/tsb.c index 7fbe1e0cd10..3eb8670282f 100644 --- a/arch/sparc64/mm/tsb.c +++ b/arch/sparc64/mm/tsb.c @@ -216,7 +216,8 @@ static void setup_tsb_params(struct mm_struct *mm, unsigned long tsb_bytes) * * The TSB can be anywhere from 8K to 1MB in size, in increasing powers * of two. The TSB must be aligned to it's size, so f.e. a 512K TSB - * must be 512K aligned. + * must be 512K aligned. It also must be physically contiguous, so we + * cannot use vmalloc(). * * The idea here is to grow the TSB when the RSS of the process approaches * the number of entries that the current TSB can hold at once. Currently, @@ -228,6 +229,8 @@ void tsb_grow(struct mm_struct *mm, unsigned long rss) unsigned long size, old_size, flags; struct page *page; struct tsb *old_tsb, *new_tsb; + unsigned long order, new_rss_limit; + gfp_t gfp_flags; if (max_tsb_size > (PAGE_SIZE << MAX_ORDER)) max_tsb_size = (PAGE_SIZE << MAX_ORDER); @@ -240,9 +243,37 @@ void tsb_grow(struct mm_struct *mm, unsigned long rss) break; } - page = alloc_pages(GFP_KERNEL, get_order(size)); - if (unlikely(!page)) + if (size == max_tsb_size) + new_rss_limit = ~0UL; + else + new_rss_limit = ((size / sizeof(struct tsb)) * 3) / 4; + +retry_page_alloc: + order = get_order(size); + gfp_flags = GFP_KERNEL; + if (order > 1) + gfp_flags = __GFP_NOWARN | __GFP_NORETRY; + + page = alloc_pages(gfp_flags, order); + if (unlikely(!page)) { + /* Not being able to fork due to a high-order TSB + * allocation failure is very bad behavior. Just back + * down to a 0-order allocation and force no TSB + * growing for this address space. + */ + if (mm->context.tsb == NULL && order > 0) { + size = PAGE_SIZE; + new_rss_limit = ~0UL; + goto retry_page_alloc; + } + + /* If we failed on a TSB grow, we are under serious + * memory pressure so don't try to grow any more. + */ + if (mm->context.tsb != NULL) + mm->context.tsb_rss_limit = ~0UL; return; + } /* Mark all tags as invalid. */ new_tsb = page_address(page); @@ -286,11 +317,7 @@ void tsb_grow(struct mm_struct *mm, unsigned long rss) return; } - if (size == max_tsb_size) - mm->context.tsb_rss_limit = ~0UL; - else - mm->context.tsb_rss_limit = - ((size / sizeof(struct tsb)) * 3) / 4; + mm->context.tsb_rss_limit = new_rss_limit; if (old_tsb) { extern void copy_tsb(unsigned long old_tsb_base, -- cgit v1.2.3-18-g5258 From 9b4006dcf6a8c43bd482b9c1ec576f0ed270ef23 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 18 Mar 2006 18:12:42 -0800 Subject: [SPARC64]: Use SLAB caches for TSB tables. Signed-off-by: David S. Miller --- arch/sparc64/Kconfig | 3 ++ arch/sparc64/mm/init.c | 5 ++- arch/sparc64/mm/tsb.c | 86 ++++++++++++++++++++++++++++++++++++-------------- 3 files changed, 69 insertions(+), 25 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig index 49b652f9b1d..c3685b314d7 100644 --- a/arch/sparc64/Kconfig +++ b/arch/sparc64/Kconfig @@ -192,6 +192,9 @@ config ARCH_SPARSEMEM_ENABLE config ARCH_SPARSEMEM_DEFAULT def_bool y +config LARGE_ALLOCS + def_bool y + source "mm/Kconfig" config GENERIC_ISA_DMA diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index d703b67bc7b..a1a364e537c 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -165,6 +165,8 @@ static void zero_ctor(void *addr, kmem_cache_t *cache, unsigned long flags) clear_page(addr); } +extern void tsb_cache_init(void); + void pgtable_cache_init(void) { pgtable_cache = kmem_cache_create("pgtable_cache", @@ -174,9 +176,10 @@ void pgtable_cache_init(void) zero_ctor, NULL); if (!pgtable_cache) { - prom_printf("pgtable_cache_init(): Could not create!\n"); + prom_printf("Could not create pgtable_cache\n"); prom_halt(); } + tsb_cache_init(); } #ifdef CONFIG_DEBUG_DCFLUSH diff --git a/arch/sparc64/mm/tsb.c b/arch/sparc64/mm/tsb.c index 3eb8670282f..1af797a0a09 100644 --- a/arch/sparc64/mm/tsb.c +++ b/arch/sparc64/mm/tsb.c @@ -11,6 +11,7 @@ #include #include #include +#include extern struct tsb swapper_tsb[KERNEL_TSB_NENTRIES]; @@ -207,6 +208,39 @@ static void setup_tsb_params(struct mm_struct *mm, unsigned long tsb_bytes) } } +static kmem_cache_t *tsb_caches[8] __read_mostly; + +static const char *tsb_cache_names[8] = { + "tsb_8KB", + "tsb_16KB", + "tsb_32KB", + "tsb_64KB", + "tsb_128KB", + "tsb_256KB", + "tsb_512KB", + "tsb_1MB", +}; + +void __init tsb_cache_init(void) +{ + unsigned long i; + + for (i = 0; i < 8; i++) { + unsigned long size = 8192 << i; + const char *name = tsb_cache_names[i]; + + tsb_caches[i] = kmem_cache_create(name, + size, size, + SLAB_HWCACHE_ALIGN | + SLAB_MUST_HWCACHE_ALIGN, + NULL, NULL); + if (!tsb_caches[i]) { + prom_printf("Could not create %s cache\n", name); + prom_halt(); + } + } +} + /* When the RSS of an address space exceeds mm->context.tsb_rss_limit, * do_sparc64_fault() invokes this routine to try and grow the TSB. * @@ -226,45 +260,48 @@ static void setup_tsb_params(struct mm_struct *mm, unsigned long tsb_bytes) void tsb_grow(struct mm_struct *mm, unsigned long rss) { unsigned long max_tsb_size = 1 * 1024 * 1024; - unsigned long size, old_size, flags; - struct page *page; + unsigned long new_size, old_size, flags; struct tsb *old_tsb, *new_tsb; - unsigned long order, new_rss_limit; + unsigned long new_cache_index, old_cache_index; + unsigned long new_rss_limit; gfp_t gfp_flags; if (max_tsb_size > (PAGE_SIZE << MAX_ORDER)) max_tsb_size = (PAGE_SIZE << MAX_ORDER); - for (size = PAGE_SIZE; size < max_tsb_size; size <<= 1UL) { - unsigned long n_entries = size / sizeof(struct tsb); + new_cache_index = 0; + for (new_size = 8192; new_size < max_tsb_size; new_size <<= 1UL) { + unsigned long n_entries = new_size / sizeof(struct tsb); n_entries = (n_entries * 3) / 4; if (n_entries > rss) break; + + new_cache_index++; } - if (size == max_tsb_size) + if (new_size == max_tsb_size) new_rss_limit = ~0UL; else - new_rss_limit = ((size / sizeof(struct tsb)) * 3) / 4; + new_rss_limit = ((new_size / sizeof(struct tsb)) * 3) / 4; -retry_page_alloc: - order = get_order(size); +retry_tsb_alloc: gfp_flags = GFP_KERNEL; - if (order > 1) + if (new_size > (PAGE_SIZE * 2)) gfp_flags = __GFP_NOWARN | __GFP_NORETRY; - page = alloc_pages(gfp_flags, order); - if (unlikely(!page)) { + new_tsb = kmem_cache_alloc(tsb_caches[new_cache_index], gfp_flags); + if (unlikely(!new_tsb)) { /* Not being able to fork due to a high-order TSB * allocation failure is very bad behavior. Just back * down to a 0-order allocation and force no TSB * growing for this address space. */ - if (mm->context.tsb == NULL && order > 0) { - size = PAGE_SIZE; + if (mm->context.tsb == NULL && new_cache_index > 0) { + new_cache_index = 0; + new_size = 8192; new_rss_limit = ~0UL; - goto retry_page_alloc; + goto retry_tsb_alloc; } /* If we failed on a TSB grow, we are under serious @@ -276,8 +313,7 @@ retry_page_alloc: } /* Mark all tags as invalid. */ - new_tsb = page_address(page); - memset(new_tsb, 0x40, size); + memset(new_tsb, 0x40, new_size); /* Ok, we are about to commit the changes. If we are * growing an existing TSB the locking is very tricky, @@ -304,8 +340,10 @@ retry_page_alloc: spin_lock_irqsave(&mm->context.lock, flags); old_tsb = mm->context.tsb; + old_cache_index = (mm->context.tsb_reg_val & 0x7UL); old_size = mm->context.tsb_nentries * sizeof(struct tsb); + /* Handle multiple threads trying to grow the TSB at the same time. * One will get in here first, and bump the size and the RSS limit. * The others will get in here next and hit this check. @@ -313,7 +351,7 @@ retry_page_alloc: if (unlikely(old_tsb && (rss < mm->context.tsb_rss_limit))) { spin_unlock_irqrestore(&mm->context.lock, flags); - free_pages((unsigned long) new_tsb, get_order(size)); + kmem_cache_free(tsb_caches[new_cache_index], new_tsb); return; } @@ -331,11 +369,11 @@ retry_page_alloc: old_tsb_base = __pa(old_tsb_base); new_tsb_base = __pa(new_tsb_base); } - copy_tsb(old_tsb_base, old_size, new_tsb_base, size); + copy_tsb(old_tsb_base, old_size, new_tsb_base, new_size); } mm->context.tsb = new_tsb; - setup_tsb_params(mm, size); + setup_tsb_params(mm, new_size); spin_unlock_irqrestore(&mm->context.lock, flags); @@ -350,7 +388,7 @@ retry_page_alloc: smp_tsb_sync(mm); /* Now it is safe to free the old tsb. */ - free_pages((unsigned long) old_tsb, get_order(old_size)); + kmem_cache_free(tsb_caches[old_cache_index], old_tsb); } } @@ -379,10 +417,10 @@ int init_new_context(struct task_struct *tsk, struct mm_struct *mm) void destroy_context(struct mm_struct *mm) { - unsigned long size = mm->context.tsb_nentries * sizeof(struct tsb); - unsigned long flags; + unsigned long flags, cache_index; - free_pages((unsigned long) mm->context.tsb, get_order(size)); + cache_index = (mm->context.tsb_reg_val & 0x7UL); + kmem_cache_free(tsb_caches[cache_index], mm->context.tsb); /* We can remove these later, but for now it's useful * to catch any bogus post-destroy_context() references -- cgit v1.2.3-18-g5258 From 88d7079458f87d6f2d2261b2f87b7b9416019f5e Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 18 Mar 2006 19:16:23 -0800 Subject: [SPARC64]: Allow CONFIG_MEMORY_HOTPLUG to build. online_page() is straightforward, and then add a dummy remove_memory() that returns -EINVAL just like i386. There is no point in implementing remove_memory() since __remove_pages() has no implementation either. Signed-off-by: David S. Miller --- arch/sparc64/mm/init.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'arch') diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index a1a364e537c..c2b556106fc 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -1805,3 +1805,21 @@ void __flush_tlb_all(void) __asm__ __volatile__("wrpr %0, 0, %%pstate" : : "r" (pstate)); } + +#ifdef CONFIG_MEMORY_HOTPLUG + +void online_page(struct page *page) +{ + ClearPageReserved(page); + set_page_count(page, 0); + free_cold_page(page); + totalram_pages++; + num_physpages++; +} + +int remove_memory(u64 start, u64 size) +{ + return -EINVAL; +} + +#endif /* CONFIG_MEMORY_HOTPLUG */ -- cgit v1.2.3-18-g5258 From bb8646d8340fa7c1b66a037428e39f85f8738f0a Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 18 Mar 2006 23:55:11 -0800 Subject: [SPARC64]: Optimized TSB table initialization. We only need to write an invalid tag every 16 bytes, so taking advantage of this can save many instructions compared to the simple memset() call we make now. A prefetching implementation is implemented for sun4u and a block-init store version if implemented for Niagara. The next trick is to be able to perform an init and a copy_tsb() in parallel when growing a TSB table. Signed-off-by: David S. Miller --- arch/sparc64/kernel/tsb.S | 69 ++++++++++++++++++++++++++++++++++++++++++++++ arch/sparc64/lib/NGbzero.S | 1 + arch/sparc64/mm/tsb.c | 2 +- 3 files changed, 71 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/tsb.S b/arch/sparc64/kernel/tsb.S index 1b154c86362..118baea44f6 100644 --- a/arch/sparc64/kernel/tsb.S +++ b/arch/sparc64/kernel/tsb.S @@ -371,3 +371,72 @@ copy_tsb: /* %o0=old_tsb_base, %o1=old_tsb_size retl TSB_MEMBAR .size copy_tsb, .-copy_tsb + + /* Set the invalid bit in all TSB entries. */ + .align 32 + .globl tsb_init + .type tsb_init,#function +tsb_init: /* %o0 = TSB vaddr, %o1 = size in bytes */ + prefetch [%o0 + 0x000], #n_writes + mov 1, %g1 + prefetch [%o0 + 0x040], #n_writes + sllx %g1, TSB_TAG_INVALID_BIT, %g1 + prefetch [%o0 + 0x080], #n_writes +1: prefetch [%o0 + 0x0c0], #n_writes + stx %g1, [%o0 + 0x00] + stx %g1, [%o0 + 0x10] + stx %g1, [%o0 + 0x20] + stx %g1, [%o0 + 0x30] + prefetch [%o0 + 0x100], #n_writes + stx %g1, [%o0 + 0x40] + stx %g1, [%o0 + 0x50] + stx %g1, [%o0 + 0x60] + stx %g1, [%o0 + 0x70] + prefetch [%o0 + 0x140], #n_writes + stx %g1, [%o0 + 0x80] + stx %g1, [%o0 + 0x90] + stx %g1, [%o0 + 0xa0] + stx %g1, [%o0 + 0xb0] + prefetch [%o0 + 0x180], #n_writes + stx %g1, [%o0 + 0xc0] + stx %g1, [%o0 + 0xd0] + stx %g1, [%o0 + 0xe0] + stx %g1, [%o0 + 0xf0] + subcc %o1, 0x100, %o1 + bne,pt %xcc, 1b + add %o0, 0x100, %o0 + retl + nop + nop + nop + .size tsb_init, .-tsb_init + + .globl NGtsb_init + .type NGtsb_init,#function +NGtsb_init: + rd %asi, %g2 + mov 1, %g1 + wr %g0, ASI_BLK_INIT_QUAD_LDD_P, %asi + sllx %g1, TSB_TAG_INVALID_BIT, %g1 +1: stxa %g1, [%o0 + 0x00] %asi + stxa %g1, [%o0 + 0x10] %asi + stxa %g1, [%o0 + 0x20] %asi + stxa %g1, [%o0 + 0x30] %asi + stxa %g1, [%o0 + 0x40] %asi + stxa %g1, [%o0 + 0x50] %asi + stxa %g1, [%o0 + 0x60] %asi + stxa %g1, [%o0 + 0x70] %asi + stxa %g1, [%o0 + 0x80] %asi + stxa %g1, [%o0 + 0x90] %asi + stxa %g1, [%o0 + 0xa0] %asi + stxa %g1, [%o0 + 0xb0] %asi + stxa %g1, [%o0 + 0xc0] %asi + stxa %g1, [%o0 + 0xd0] %asi + stxa %g1, [%o0 + 0xe0] %asi + stxa %g1, [%o0 + 0xf0] %asi + subcc %o1, 0x100, %o1 + bne,pt %xcc, 1b + add %o0, 0x100, %o0 + retl + wr %g2, 0x0, %asi + .size NGtsb_init, .-NGtsb_init diff --git a/arch/sparc64/lib/NGbzero.S b/arch/sparc64/lib/NGbzero.S index fef584f745d..e86baece5cc 100644 --- a/arch/sparc64/lib/NGbzero.S +++ b/arch/sparc64/lib/NGbzero.S @@ -157,6 +157,7 @@ niagara_patch_bzero: NG_DO_PATCH(memset, NGmemset) NG_DO_PATCH(__bzero, NGbzero) NG_DO_PATCH(__clear_user, NGclear_user) + NG_DO_PATCH(tsb_init, NGtsb_init) retl nop .size niagara_patch_bzero,.-niagara_patch_bzero diff --git a/arch/sparc64/mm/tsb.c b/arch/sparc64/mm/tsb.c index 1af797a0a09..b2064e2a44d 100644 --- a/arch/sparc64/mm/tsb.c +++ b/arch/sparc64/mm/tsb.c @@ -313,7 +313,7 @@ retry_tsb_alloc: } /* Mark all tags as invalid. */ - memset(new_tsb, 0x40, new_size); + tsb_init(new_tsb, new_size); /* Ok, we are about to commit the changes. If we are * growing an existing TSB the locking is very tricky, -- cgit v1.2.3-18-g5258 From 467418f3508b426adbc7df795ebf3baaed4fbefc Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Sun, 19 Mar 2006 12:46:55 -0800 Subject: [SPARC64]: CONFIG_BLK_DEV_RAM fix init/do_mounts_rd.c depends upon CONFIG_BLK_DEV_RAM, not CONFIG_BLK_DEV_INITRD. Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- arch/sparc64/kernel/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index 7ae4027a919..7d0e67c1ce5 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -349,7 +349,7 @@ void __init setup_arch(char **cmdline_p) if (!root_flags) root_mountflags &= ~MS_RDONLY; ROOT_DEV = old_decode_dev(root_dev); -#ifdef CONFIG_BLK_DEV_INITRD +#ifdef CONFIG_BLK_DEV_RAM rd_image_start = ram_flags & RAMDISK_IMAGE_START_MASK; rd_prompt = ((ram_flags & RAMDISK_PROMPT_FLAG) != 0); rd_doload = ((ram_flags & RAMDISK_LOAD_FLAG) != 0); -- cgit v1.2.3-18-g5258 From f6b83f070e9b7ad9075f7cc5646260e56c7d0219 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 20 Mar 2006 01:17:17 -0800 Subject: [SPARC64]: Fix 2 bugs in huge page support. 1) huge_pte_offset() did not check the page table hierarchy elements as being empty correctly, resulting in an OOPS 2) Need platform specific hugetlb_get_unmapped_area() to handle the top-down vs. bottom-up address space allocation strategies. Signed-off-by: David S. Miller --- arch/sparc64/mm/hugetlbpage.c | 179 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 175 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/mm/hugetlbpage.c b/arch/sparc64/mm/hugetlbpage.c index 625cbb336a2..a7a24869d04 100644 --- a/arch/sparc64/mm/hugetlbpage.c +++ b/arch/sparc64/mm/hugetlbpage.c @@ -1,7 +1,7 @@ /* * SPARC64 Huge TLB page support. * - * Copyright (C) 2002, 2003 David S. Miller (davem@redhat.com) + * Copyright (C) 2002, 2003, 2006 David S. Miller (davem@davemloft.net) */ #include @@ -22,6 +22,175 @@ #include #include +/* Slightly simplified from the non-hugepage variant because by + * definition we don't have to worry about any page coloring stuff + */ +#define VA_EXCLUDE_START (0x0000080000000000UL - (1UL << 32UL)) +#define VA_EXCLUDE_END (0xfffff80000000000UL + (1UL << 32UL)) + +static unsigned long hugetlb_get_unmapped_area_bottomup(struct file *filp, + unsigned long addr, + unsigned long len, + unsigned long pgoff, + unsigned long flags) +{ + struct mm_struct *mm = current->mm; + struct vm_area_struct * vma; + unsigned long task_size = TASK_SIZE; + unsigned long start_addr; + + if (test_thread_flag(TIF_32BIT)) + task_size = STACK_TOP32; + if (unlikely(len >= VA_EXCLUDE_START)) + return -ENOMEM; + + if (len > mm->cached_hole_size) { + start_addr = addr = mm->free_area_cache; + } else { + start_addr = addr = TASK_UNMAPPED_BASE; + mm->cached_hole_size = 0; + } + + task_size -= len; + +full_search: + addr = ALIGN(addr, HPAGE_SIZE); + + for (vma = find_vma(mm, addr); ; vma = vma->vm_next) { + /* At this point: (!vma || addr < vma->vm_end). */ + if (addr < VA_EXCLUDE_START && + (addr + len) >= VA_EXCLUDE_START) { + addr = VA_EXCLUDE_END; + vma = find_vma(mm, VA_EXCLUDE_END); + } + if (unlikely(task_size < addr)) { + if (start_addr != TASK_UNMAPPED_BASE) { + start_addr = addr = TASK_UNMAPPED_BASE; + mm->cached_hole_size = 0; + goto full_search; + } + return -ENOMEM; + } + if (likely(!vma || addr + len <= vma->vm_start)) { + /* + * Remember the place where we stopped the search: + */ + mm->free_area_cache = addr + len; + return addr; + } + if (addr + mm->cached_hole_size < vma->vm_start) + mm->cached_hole_size = vma->vm_start - addr; + + addr = ALIGN(vma->vm_end, HPAGE_SIZE); + } +} + +static unsigned long +hugetlb_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, + const unsigned long len, + const unsigned long pgoff, + const unsigned long flags) +{ + struct vm_area_struct *vma; + struct mm_struct *mm = current->mm; + unsigned long addr = addr0; + + /* This should only ever run for 32-bit processes. */ + BUG_ON(!test_thread_flag(TIF_32BIT)); + + /* check if free_area_cache is useful for us */ + if (len <= mm->cached_hole_size) { + mm->cached_hole_size = 0; + mm->free_area_cache = mm->mmap_base; + } + + /* either no address requested or can't fit in requested address hole */ + addr = mm->free_area_cache & HPAGE_MASK; + + /* make sure it can fit in the remaining address space */ + if (likely(addr > len)) { + vma = find_vma(mm, addr-len); + if (!vma || addr <= vma->vm_start) { + /* remember the address as a hint for next time */ + return (mm->free_area_cache = addr-len); + } + } + + if (unlikely(mm->mmap_base < len)) + goto bottomup; + + addr = (mm->mmap_base-len) & HPAGE_MASK; + + do { + /* + * Lookup failure means no vma is above this address, + * else if new region fits below vma->vm_start, + * return with success: + */ + vma = find_vma(mm, addr); + if (likely(!vma || addr+len <= vma->vm_start)) { + /* remember the address as a hint for next time */ + return (mm->free_area_cache = addr); + } + + /* remember the largest hole we saw so far */ + if (addr + mm->cached_hole_size < vma->vm_start) + mm->cached_hole_size = vma->vm_start - addr; + + /* try just below the current vma->vm_start */ + addr = (vma->vm_start-len) & HPAGE_MASK; + } while (likely(len < vma->vm_start)); + +bottomup: + /* + * A failed mmap() very likely causes application failure, + * so fall back to the bottom-up function here. This scenario + * can happen with large stack limits and large mmap() + * allocations. + */ + mm->cached_hole_size = ~0UL; + mm->free_area_cache = TASK_UNMAPPED_BASE; + addr = arch_get_unmapped_area(filp, addr0, len, pgoff, flags); + /* + * Restore the topdown base: + */ + mm->free_area_cache = mm->mmap_base; + mm->cached_hole_size = ~0UL; + + return addr; +} + +unsigned long +hugetlb_get_unmapped_area(struct file *file, unsigned long addr, + unsigned long len, unsigned long pgoff, unsigned long flags) +{ + struct mm_struct *mm = current->mm; + struct vm_area_struct *vma; + unsigned long task_size = TASK_SIZE; + + if (test_thread_flag(TIF_32BIT)) + task_size = STACK_TOP32; + + if (len & ~HPAGE_MASK) + return -EINVAL; + if (len > task_size) + return -ENOMEM; + + if (addr) { + addr = ALIGN(addr, HPAGE_SIZE); + vma = find_vma(mm, addr); + if (task_size - len >= addr && + (!vma || addr + len <= vma->vm_start)) + return addr; + } + if (mm->get_unmapped_area == arch_get_unmapped_area) + return hugetlb_get_unmapped_area_bottomup(file, addr, len, + pgoff, flags); + else + return hugetlb_get_unmapped_area_topdown(file, addr, len, + pgoff, flags); +} + pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr) { pgd_t *pgd; @@ -48,12 +217,14 @@ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) pmd_t *pmd; pte_t *pte = NULL; + addr &= HPAGE_MASK; + pgd = pgd_offset(mm, addr); - if (pgd) { + if (!pgd_none(*pgd)) { pud = pud_offset(pgd, addr); - if (pud) { + if (!pud_none(*pud)) { pmd = pmd_offset(pud, addr); - if (pmd) + if (!pmd_none(*pmd)) pte = pte_offset_map(pmd, addr); } } -- cgit v1.2.3-18-g5258 From ac0eb3eb7e54b700386068be025a43d2a3958ee5 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 20 Mar 2006 01:23:43 -0800 Subject: [SPARC64]: Update defconfig. Signed-off-by: David S. Miller --- arch/sparc64/defconfig | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/defconfig b/arch/sparc64/defconfig index 069d49777b2..f819a9663a8 100644 --- a/arch/sparc64/defconfig +++ b/arch/sparc64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc2 -# Tue Feb 7 17:47:18 2006 +# Linux kernel version: 2.6.16 +# Mon Mar 20 01:23:21 2006 # CONFIG_SPARC=y CONFIG_SPARC64=y @@ -115,14 +115,20 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HUGETLB_PAGE_SIZE_4MB=y # CONFIG_HUGETLB_PAGE_SIZE_512K is not set # CONFIG_HUGETLB_PAGE_SIZE_64K is not set +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_LARGE_ALLOCS=y CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y +# CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_EXTREME=y +CONFIG_MEMORY_HOTPLUG=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_GENERIC_ISA_DMA=y CONFIG_SBUS=y CONFIG_SBUSCHAR=y @@ -655,6 +661,7 @@ CONFIG_SERIAL_SUNCORE=y CONFIG_SERIAL_SUNSU=y CONFIG_SERIAL_SUNSU_CONSOLE=y CONFIG_SERIAL_SUNSAB=m +CONFIG_SERIAL_SUNHV=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set @@ -1116,11 +1123,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_INFINIBAND is not set # -# SN Devices -# - -# -# EDAC - error detection and reporting (RAS) +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # # -- cgit v1.2.3-18-g5258 From 7e7f8a036b8e2b2a300df016da5e7128c8a9192e Mon Sep 17 00:00:00 2001 From: Jason Baron Date: Tue, 31 Jan 2006 16:56:28 -0500 Subject: [PATCH] make vm86 call audit_syscall_exit hi, The motivation behind the patch below was to address messages in /var/log/messages such as: Jan 31 10:54:15 mets kernel: audit(:0): major=252 name_count=0: freeing multiple contexts (1) Jan 31 10:54:15 mets kernel: audit(:0): major=113 name_count=0: freeing multiple contexts (2) I can reproduce by running 'get-edid' from: http://john.fremlin.de/programs/linux/read-edid/. These messages come about in the log b/c the vm86 calls do not exit via the normal system call exit paths and thus do not call 'audit_syscall_exit'. The next system call will then free the context for itself and for the vm86 context, thus generating the above messages. This patch addresses the issue by simply adding a call to 'audit_syscall_exit' from the vm86 code. Besides fixing the above error messages the patch also now allows vm86 system calls to become auditable. This is useful since strace does not appear to properly record the return values from sys_vm86. I think this patch is also a step in the right direction in terms of cleaning up some core auditing code. If we can correct any other paths that do not properly call the audit exit and entries points, then we can also eliminate the notion of context chaining. I've tested this patch by verifying that the log messages no longer appear, and that the audit records for sys_vm86 appear to be correct. Also, 'read_edid' produces itentical output. thanks, -Jason Signed-off-by: Jason Baron Signed-off-by: Al Viro --- arch/i386/kernel/vm86.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/vm86.c b/arch/i386/kernel/vm86.c index f51c894a7da..aee14fafd13 100644 --- a/arch/i386/kernel/vm86.c +++ b/arch/i386/kernel/vm86.c @@ -43,6 +43,7 @@ #include #include #include +#include #include #include @@ -252,6 +253,7 @@ out: static void do_sys_vm86(struct kernel_vm86_struct *info, struct task_struct *tsk) { struct tss_struct *tss; + long eax; /* * make sure the vm86() system call doesn't try to do anything silly */ @@ -305,13 +307,19 @@ static void do_sys_vm86(struct kernel_vm86_struct *info, struct task_struct *tsk tsk->thread.screen_bitmap = info->screen_bitmap; if (info->flags & VM86_SCREEN_BITMAP) mark_screen_rdonly(tsk->mm); + __asm__ __volatile__("xorl %eax,%eax; movl %eax,%fs; movl %eax,%gs\n\t"); + __asm__ __volatile__("movl %%eax, %0\n" :"=r"(eax)); + + /*call audit_syscall_exit since we do not exit via the normal paths */ + if (unlikely(current->audit_context)) + audit_syscall_exit(current, AUDITSC_RESULT(eax), eax); + __asm__ __volatile__( - "xorl %%eax,%%eax; movl %%eax,%%fs; movl %%eax,%%gs\n\t" "movl %0,%%esp\n\t" "movl %1,%%ebp\n\t" "jmp resume_userspace" : /* no outputs */ - :"r" (&info->regs), "r" (task_thread_info(tsk)) : "ax"); + :"r" (&info->regs), "r" (task_thread_info(tsk))); /* we never return here */ } -- cgit v1.2.3-18-g5258 From ee436dc46a762f430e37952d375a23d87735f73f Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Fri, 18 Nov 2005 14:43:54 +0000 Subject: [PATCH] Fix IA64 success/failure indication in syscall auditing. Original 2.6.9 patch and explanation from somewhere within HP via bugzilla... ia64 stores a success/failure code in r10, and the return value (normal return, or *positive* errno) in r8. The patch also sets the exit code to negative errno if it's a failure result for consistency with other architectures. Signed-off-by: David Woodhouse --- arch/ia64/kernel/ptrace.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c index eaed14aac6a..9887c8787e7 100644 --- a/arch/ia64/kernel/ptrace.c +++ b/arch/ia64/kernel/ptrace.c @@ -1656,8 +1656,14 @@ syscall_trace_leave (long arg0, long arg1, long arg2, long arg3, long arg4, long arg5, long arg6, long arg7, struct pt_regs regs) { - if (unlikely(current->audit_context)) - audit_syscall_exit(current, AUDITSC_RESULT(regs.r10), regs.r8); + if (unlikely(current->audit_context)) { + int success = AUDITSC_RESULT(regs.r10); + long result = regs.r8; + + if (success != AUDITSC_SUCCESS) + result = -result; + audit_syscall_exit(current, success, result); + } if (test_thread_flag(TIF_SYSCALL_TRACE) && (current->ptrace & PT_PTRACED)) -- cgit v1.2.3-18-g5258 From f30c52d0c9081019bf76a4dbd905bc7c0d89411c Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 20 Mar 2006 20:14:06 +0100 Subject: update the i386 defconfig The i386 defconfig wasn't updated for ages. Instead of running "make oldconfig" on the old defconfig and trying to give reasonable answers at all new options, this patch replaces it with the one I'm using in 2.6.16-rc1. This way, it's a .config that is confirmed to work on at least one computer in the world. ;-) Signed-off-by: Adrian Bunk --- arch/i386/defconfig | 1172 ++++++++++++++++++++++++++++++++------------------- 1 file changed, 741 insertions(+), 431 deletions(-) (limited to 'arch') diff --git a/arch/i386/defconfig b/arch/i386/defconfig index 3cbe6e9cb9f..1629c3ac9be 100644 --- a/arch/i386/defconfig +++ b/arch/i386/defconfig @@ -1,49 +1,87 @@ # # Automatically generated make config: don't edit # +CONFIG_X86_32=y +CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_X86=y CONFIG_MMU=y -CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y +CONFIG_GENERIC_IOMAP=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_DMI=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_STANDALONE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y +# CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y -CONFIG_AUDIT=y -CONFIG_AUDITSYSCALL=y -CONFIG_LOG_BUF_SHIFT=15 -CONFIG_HOTPLUG=y -# CONFIG_IKCONFIG is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_UID16=y +CONFIG_VM86=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support # CONFIG_MODULES=y -# CONFIG_MODULE_UNLOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set + +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" # # Processor type and features @@ -66,43 +104,50 @@ CONFIG_X86_PC=y # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set -CONFIG_MPENTIUM4=y +# CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set -# CONFIG_MK7 is not set +CONFIG_MK7=y # CONFIG_MK8 is not set # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set +# CONFIG_MGEODEGX1 is not set +# CONFIG_MGEODE_LX is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_X86_GENERIC is not set CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y -CONFIG_X86_L1_CACHE_SHIFT=7 +CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y +CONFIG_X86_CMPXCHG64=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y +CONFIG_X86_USE_3DNOW=y +CONFIG_X86_TSC=y # CONFIG_HPET_TIMER is not set -# CONFIG_HPET_EMULATE_RTC is not set -CONFIG_SMP=y -CONFIG_NR_CPUS=8 -CONFIG_SCHED_SMT=y -CONFIG_PREEMPT=y +# CONFIG_SMP is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_X86_UP_APIC=y +CONFIG_X86_UP_IOAPIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y -CONFIG_X86_TSC=y CONFIG_X86_MCE=y CONFIG_X86_MCE_NONFATAL=y -CONFIG_X86_MCE_P4THERMAL=y +# CONFIG_X86_MCE_P4THERMAL is not set # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set +# CONFIG_X86_REBOOTFIXUPS is not set # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set @@ -111,41 +156,71 @@ CONFIG_X86_MCE_P4THERMAL=y # Firmware Drivers # # CONFIG_EDD is not set +# CONFIG_DELL_RBU is not set +# CONFIG_DCDBAS is not set CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_3G_OPT is not set +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_STATIC=y +CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y # CONFIG_EFI is not set -CONFIG_IRQBALANCE=y -CONFIG_HAVE_DEC_LOCK=y -# CONFIG_REGPARM is not set +CONFIG_REGPARM=y +# CONFIG_SECCOMP is not set +CONFIG_HZ_100=y +# CONFIG_HZ_250 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=100 +# CONFIG_KEXEC is not set +CONFIG_PHYSICAL_START=0x100000 +CONFIG_DOUBLEFAULT=y # # Power management options (ACPI, APM) # CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set CONFIG_SOFTWARE_SUSPEND=y +CONFIG_PM_STD_PARTITION="/dev/hda2" # # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SLEEP_PROC_FS=y -CONFIG_ACPI_AC=y -CONFIG_ACPI_BATTERY=y -CONFIG_ACPI_BUTTON=y -CONFIG_ACPI_FAN=y -CONFIG_ACPI_PROCESSOR=y -CONFIG_ACPI_THERMAL=y +# CONFIG_ACPI_SLEEP is not set +# CONFIG_ACPI_AC is not set +# CONFIG_ACPI_BATTERY is not set +# CONFIG_ACPI_BUTTON is not set +# CONFIG_ACPI_VIDEO is not set +# CONFIG_ACPI_HOTKEY is not set +# CONFIG_ACPI_FAN is not set +# CONFIG_ACPI_PROCESSOR is not set # CONFIG_ACPI_ASUS is not set +# CONFIG_ACPI_IBM is not set # CONFIG_ACPI_TOSHIBA is not set +CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y # CONFIG_X86_PM_TIMER is not set +# CONFIG_ACPI_CONTAINER is not set # # APM (Advanced Power Management) BIOS Support @@ -168,19 +243,18 @@ CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y -# CONFIG_PCI_USE_VECTOR is not set -CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y -CONFIG_ISA=y -# CONFIG_EISA is not set +# CONFIG_PCIEPORTBUS is not set +# CONFIG_PCI_MSI is not set +# CONFIG_PCI_LEGACY_PROC is not set +CONFIG_ISA_DMA_API=y +# CONFIG_ISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set # -# PCMCIA/CardBus support +# PCCARD (PCMCIA/CardBus) support # -# CONFIG_PCMCIA is not set -CONFIG_PCMCIA_PROBE=y +# CONFIG_PCCARD is not set # # PCI Hotplug Support @@ -191,8 +265,147 @@ CONFIG_PCMCIA_PROBE=y # Executable file formats # CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=y -CONFIG_BINFMT_MISC=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set +CONFIG_NETFILTER_XTABLES=y +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_HELPER is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +CONFIG_NETFILTER_XT_MATCH_LIMIT=y +CONFIG_NETFILTER_XT_MATCH_MAC=y +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +CONFIG_NETFILTER_XT_MATCH_STATE=y +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=y +# CONFIG_IP_NF_CT_ACCT is not set +# CONFIG_IP_NF_CONNTRACK_MARK is not set +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set +# CONFIG_IP_NF_CT_PROTO_SCTP is not set +CONFIG_IP_NF_FTP=y +# CONFIG_IP_NF_IRC is not set +# CONFIG_IP_NF_NETBIOS_NS is not set +# CONFIG_IP_NF_TFTP is not set +# CONFIG_IP_NF_AMANDA is not set +# CONFIG_IP_NF_PPTP is not set +# CONFIG_IP_NF_QUEUE is not set +CONFIG_IP_NF_IPTABLES=y +# CONFIG_IP_NF_MATCH_IPRANGE is not set +# CONFIG_IP_NF_MATCH_MULTIPORT is not set +# CONFIG_IP_NF_MATCH_TOS is not set +# CONFIG_IP_NF_MATCH_RECENT is not set +# CONFIG_IP_NF_MATCH_ECN is not set +# CONFIG_IP_NF_MATCH_DSCP is not set +# CONFIG_IP_NF_MATCH_AH_ESP is not set +# CONFIG_IP_NF_MATCH_TTL is not set +# CONFIG_IP_NF_MATCH_OWNER is not set +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +# CONFIG_IP_NF_MATCH_HASHLIMIT is not set +CONFIG_IP_NF_FILTER=y +# CONFIG_IP_NF_TARGET_REJECT is not set +CONFIG_IP_NF_TARGET_LOG=y +# CONFIG_IP_NF_TARGET_ULOG is not set +# CONFIG_IP_NF_TARGET_TCPMSS is not set +# CONFIG_IP_NF_NAT is not set +# CONFIG_IP_NF_MANGLE is not set +# CONFIG_IP_NF_RAW is not set +# CONFIG_IP_NF_ARPTABLES is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -201,7 +414,14 @@ CONFIG_BINFMT_MISC=y # # Generic Driver Options # -CONFIG_FW_LOADER=m +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set # # Memory Technology Devices (MTD) @@ -213,40 +433,36 @@ CONFIG_FW_LOADER=m # CONFIG_PARPORT=y CONFIG_PARPORT_PC=y -CONFIG_PARPORT_PC_CML1=y # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set -# CONFIG_PARPORT_OTHER is not set -# CONFIG_PARPORT_1284 is not set +# CONFIG_PARPORT_GSC is not set +CONFIG_PARPORT_1284=y # # Plug and Play support # -CONFIG_PNP=y -# CONFIG_PNP_DEBUG is not set - -# -# Protocols -# -# CONFIG_ISAPNP is not set -# CONFIG_PNPBIOS is not set +# CONFIG_PNP is not set # # Block devices # -CONFIG_BLK_DEV_FD=y -# CONFIG_BLK_DEV_XD is not set +# CONFIG_BLK_DEV_FD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_CARMEL is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_LBD=y +CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support @@ -257,34 +473,31 @@ CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # +# CONFIG_BLK_DEV_IDE_SATA is not set # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y -CONFIG_IDEDISK_MULTI_MODE=y +# CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set -CONFIG_IDE_TASKFILE_IO=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_CMD640=y -# CONFIG_BLK_DEV_CMD640_ENHANCED is not set -# CONFIG_BLK_DEV_IDEPNP is not set +# CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_CMD640 is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_GENERIC is not set # CONFIG_BLK_DEV_OPTI621 is not set -CONFIG_BLK_DEV_RZ1000=y +# CONFIG_BLK_DEV_RZ1000 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_ADMA=y # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set @@ -294,10 +507,12 @@ CONFIG_BLK_DEV_ADMA=y # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_CS5535 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set -CONFIG_BLK_DEV_PIIX=y +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set @@ -306,9 +521,8 @@ CONFIG_BLK_DEV_PIIX=y # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set +CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_IDE_ARM is not set -# CONFIG_IDE_CHIPSETS is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set CONFIG_IDEDMA_AUTO=y @@ -317,8 +531,9 @@ CONFIG_IDEDMA_AUTO=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y +# CONFIG_SCSI_PROC_FS is not set # # SCSI support type (disk, tape, CD-ROM) @@ -327,7 +542,8 @@ CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set -CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -341,78 +557,46 @@ CONFIG_CHR_DEV_SG=y # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_7000FASST is not set +# CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AHA152X is not set -# CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set -CONFIG_SCSI_DPT_I2O=m -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_IN2000 is not set -# CONFIG_SCSI_MEGARAID is not set -CONFIG_SCSI_SATA=y -# CONFIG_SCSI_SATA_SVW is not set -CONFIG_SCSI_ATA_PIIX=y -# CONFIG_SCSI_SATA_PROMISE is not set -CONFIG_SCSI_SATA_SX4=m -# CONFIG_SCSI_SATA_SIL is not set -CONFIG_SCSI_SATA_SIS=m -# CONFIG_SCSI_SATA_VIA is not set -# CONFIG_SCSI_SATA_VITESSE is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_SATA is not set # CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_GENERIC_NCR5380 is not set -# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set # CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set -# CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_SYM53C8XX_2 is not set -CONFIG_SCSI_IPR=m -# CONFIG_SCSI_IPR_TRACE is not set -# CONFIG_SCSI_IPR_DUMP is not set -# CONFIG_SCSI_PAS16 is not set -# CONFIG_SCSI_PSI240I is not set -# CONFIG_SCSI_QLOGIC_FAS is not set -# CONFIG_SCSI_QLOGIC_ISP is not set +# CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA6322 is not set -# CONFIG_SCSI_SYM53C416 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_T128 is not set -# CONFIG_SCSI_U14_34F is not set -# CONFIG_SCSI_ULTRASTOR is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - # # Multi-device support (RAID and LVM) # @@ -422,37 +606,14 @@ CONFIG_SCSI_QLA2XXX=y # Fusion MPT device support # # CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support # -CONFIG_IEEE1394=y - -# -# Subsystem Options -# -# CONFIG_IEEE1394_VERBOSEDEBUG is not set -# CONFIG_IEEE1394_OUI_DB is not set -# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set - -# -# Device Drivers -# - -# -# Texas Instruments PCILynx requires I2C -# -CONFIG_IEEE1394_OHCI1394=y - -# -# Protocol Drivers -# -# CONFIG_IEEE1394_VIDEO1394 is not set -# CONFIG_IEEE1394_SBP2 is not set -# CONFIG_IEEE1394_ETH1394 is not set -# CONFIG_IEEE1394_DV1394 is not set -CONFIG_IEEE1394_RAWIO=y -# CONFIG_IEEE1394_CMP is not set +# CONFIG_IEEE1394 is not set # # I2O device support @@ -460,136 +621,24 @@ CONFIG_IEEE1394_RAWIO=y # CONFIG_I2O is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# IP: Netfilter Configuration +# Network device support # -CONFIG_IP_NF_CONNTRACK=y -# CONFIG_IP_NF_FTP is not set -# CONFIG_IP_NF_IRC is not set -# CONFIG_IP_NF_TFTP is not set -# CONFIG_IP_NF_AMANDA is not set -CONFIG_IP_NF_QUEUE=y -CONFIG_IP_NF_IPTABLES=y -CONFIG_IP_NF_MATCH_LIMIT=y -CONFIG_IP_NF_MATCH_IPRANGE=y -CONFIG_IP_NF_MATCH_MAC=y -CONFIG_IP_NF_MATCH_PKTTYPE=y -CONFIG_IP_NF_MATCH_MARK=y -CONFIG_IP_NF_MATCH_MULTIPORT=y -CONFIG_IP_NF_MATCH_TOS=y -CONFIG_IP_NF_MATCH_RECENT=y -CONFIG_IP_NF_MATCH_ECN=y -CONFIG_IP_NF_MATCH_DSCP=y -CONFIG_IP_NF_MATCH_AH_ESP=y -CONFIG_IP_NF_MATCH_LENGTH=y -CONFIG_IP_NF_MATCH_TTL=y -CONFIG_IP_NF_MATCH_TCPMSS=y -CONFIG_IP_NF_MATCH_HELPER=y -CONFIG_IP_NF_MATCH_STATE=y -CONFIG_IP_NF_MATCH_CONNTRACK=y -CONFIG_IP_NF_MATCH_OWNER=y -CONFIG_IP_NF_FILTER=y -CONFIG_IP_NF_TARGET_REJECT=y -CONFIG_IP_NF_NAT=y -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=y -CONFIG_IP_NF_TARGET_REDIRECT=y -CONFIG_IP_NF_TARGET_NETMAP=y -CONFIG_IP_NF_TARGET_SAME=y -# CONFIG_IP_NF_NAT_SNMP_BASIC is not set -CONFIG_IP_NF_MANGLE=y -CONFIG_IP_NF_TARGET_TOS=y -CONFIG_IP_NF_TARGET_ECN=y -CONFIG_IP_NF_TARGET_DSCP=y -CONFIG_IP_NF_TARGET_MARK=y -CONFIG_IP_NF_TARGET_CLASSIFY=y -CONFIG_IP_NF_TARGET_LOG=y -CONFIG_IP_NF_TARGET_ULOG=y -CONFIG_IP_NF_TARGET_TCPMSS=y -CONFIG_IP_NF_ARPTABLES=y -CONFIG_IP_NF_ARPFILTER=y -CONFIG_IP_NF_ARP_MANGLE=y -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_RAW=m - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y -CONFIG_DUMMY=m +# CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set -# CONFIG_NET_SB1000 is not set # # ARCnet devices # # CONFIG_ARCNET is not set +# +# PHY device support +# +# CONFIG_PHYLIB is not set + # # Ethernet (10 or 100Mbit) # @@ -597,40 +646,28 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set -# CONFIG_LANCE is not set -# CONFIG_NET_VENDOR_SMC is not set -# CONFIG_NET_VENDOR_RACAL is not set # # Tulip family network device support # # CONFIG_NET_TULIP is not set -# CONFIG_AT1700 is not set -# CONFIG_DEPCA is not set # CONFIG_HP100 is not set -# CONFIG_NET_ISA is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_AC3200 is not set -# CONFIG_APRICOT is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_CS89x0 is not set # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set -# CONFIG_E100 is not set +CONFIG_E100=y # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set -CONFIG_8139TOO=y -CONFIG_8139TOO_PIO=y -# CONFIG_8139TOO_TUNE_TWISTER is not set -# CONFIG_8139TOO_8129 is not set -# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_8139TOO is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -644,21 +681,24 @@ CONFIG_8139TOO_PIO=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set -# CONFIG_E1000_NAPI is not set -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set -CONFIG_S2IO=m -# CONFIG_S2IO_NAPI is not set +# CONFIG_S2IO is not set # # Token Ring devices @@ -682,6 +722,8 @@ CONFIG_S2IO=m # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -703,25 +745,13 @@ CONFIG_INPUT=y # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set +CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PARKBD is not set -# CONFIG_SERIO_PCIPS2 is not set - # # Input Device Drivers # @@ -734,14 +764,24 @@ CONFIG_KEYBOARD_ATKBD=y CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_INPORT is not set -# CONFIG_MOUSE_LOGIBM is not set -# CONFIG_MOUSE_PC110PAD is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_CT82C710 is not set +# CONFIG_SERIO_PARKBD is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + # # Character devices # @@ -757,12 +797,14 @@ CONFIG_SERIAL_8250=y # CONFIG_SERIAL_8250_CONSOLE is not set # CONFIG_SERIAL_8250_ACPI is not set CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -770,7 +812,6 @@ CONFIG_PRINTER=y # CONFIG_LP_CONSOLE is not set # CONFIG_PPDEV is not set # CONFIG_TIPAR is not set -# CONFIG_QIC02_TAPE is not set # # IPMI @@ -782,9 +823,8 @@ CONFIG_PRINTER=y # # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set +CONFIG_NVRAM=y +CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -793,62 +833,268 @@ CONFIG_PRINTER=y # # Ftape, the floppy tape device driver # +# CONFIG_FTAPE is not set CONFIG_AGP=y # CONFIG_AGP_ALI is not set # CONFIG_AGP_ATI is not set # CONFIG_AGP_AMD is not set # CONFIG_AGP_AMD64 is not set -CONFIG_AGP_INTEL=y +# CONFIG_AGP_INTEL is not set # CONFIG_AGP_NVIDIA is not set # CONFIG_AGP_SIS is not set # CONFIG_AGP_SWORKS is not set -# CONFIG_AGP_VIA is not set +CONFIG_AGP_VIA=y # CONFIG_AGP_EFFICEON is not set CONFIG_DRM=y # CONFIG_DRM_TDFX is not set -# CONFIG_DRM_GAMMA is not set # CONFIG_DRM_R128 is not set -# CONFIG_DRM_RADEON is not set -# CONFIG_DRM_I810 is not set -CONFIG_DRM_I830=y +CONFIG_DRM_RADEON=y # CONFIG_DRM_MGA is not set # CONFIG_DRM_SIS is not set +# CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set # CONFIG_MWAVE is not set +# CONFIG_CS5535_GPIO is not set # CONFIG_RAW_DRIVER is not set +# CONFIG_HPET is not set # CONFIG_HANGCHECK_TIMER is not set +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + # # I2C support # -# CONFIG_I2C is not set +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_ISA=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +CONFIG_I2C_VIAPRO=y +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +CONFIG_HWMON_VID=y +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +CONFIG_SENSORS_IT87=y +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_HDAPS is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices # # CONFIG_IBM_ASM is not set +# +# Multimedia Capabilities Port drivers +# + # # Multimedia devices # -# CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_DEV=y + +# +# Video For Linux +# + +# +# Video Adapters +# +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_BT848 is not set +# CONFIG_VIDEO_BWQCAM is not set +# CONFIG_VIDEO_CQCAM is not set +# CONFIG_VIDEO_W9966 is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_TUNER_3036 is not set +# CONFIG_VIDEO_STRADIS is not set +# CONFIG_VIDEO_ZORAN is not set +CONFIG_VIDEO_SAA7134=y +# CONFIG_VIDEO_SAA7134_ALSA is not set +# CONFIG_VIDEO_MXB is not set +# CONFIG_VIDEO_DPC is not set +# CONFIG_VIDEO_HEXIUM_ORION is not set +# CONFIG_VIDEO_HEXIUM_GEMINI is not set +# CONFIG_VIDEO_CX88 is not set +# CONFIG_VIDEO_EM28XX is not set +# CONFIG_VIDEO_OVCAMCHIP is not set +# CONFIG_VIDEO_AUDIO_DECODER is not set +# CONFIG_VIDEO_DECODER is not set + +# +# Radio Adapters +# +# CONFIG_RADIO_GEMTEK_PCI is not set +# CONFIG_RADIO_MAXIRADIO is not set +# CONFIG_RADIO_MAESTRO is not set # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set +CONFIG_VIDEO_TUNER=y +CONFIG_VIDEO_BUF=y +CONFIG_VIDEO_IR=y # # Graphics support # -# CONFIG_FB is not set -# CONFIG_VIDEO_SELECT is not set +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_MACMODES is not set +CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ARC is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_VESA is not set +CONFIG_VIDEO_SELECT=y +# CONFIG_FB_HGA is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_I810 is not set +# CONFIG_FB_INTEL is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON_OLD is not set +CONFIG_FB_RADEON=y +CONFIG_FB_RADEON_I2C=y +# CONFIG_FB_RADEON_DEBUG is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_CYBLA is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_GEODE is not set +# CONFIG_FB_VIRTUAL is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y -# CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y + +# +# Logo configuration +# +# CONFIG_LOGO is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -864,10 +1110,13 @@ CONFIG_SND_PCM=y CONFIG_SND_RAWMIDI=y CONFIG_SND_SEQUENCER=y # CONFIG_SND_SEQ_DUMMY is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_SEQUENCER_OSS is not set +CONFIG_SND_RTCTIMER=y +CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y +# CONFIG_SND_DYNAMIC_MINORS is not set +# CONFIG_SND_SUPPORT_OLD_API is not set # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set @@ -875,81 +1124,66 @@ CONFIG_SND_SEQUENCER_OSS=y # Generic devices # CONFIG_SND_MPU401_UART=y +CONFIG_SND_AC97_CODEC=y +CONFIG_SND_AC97_BUS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set -# -# ISA devices -# -# CONFIG_SND_AD1848 is not set -# CONFIG_SND_CS4231 is not set -# CONFIG_SND_CS4232 is not set -# CONFIG_SND_CS4236 is not set -# CONFIG_SND_ES1688 is not set -# CONFIG_SND_ES18XX is not set -# CONFIG_SND_GUSCLASSIC is not set -# CONFIG_SND_GUSEXTREME is not set -# CONFIG_SND_GUSMAX is not set -# CONFIG_SND_INTERWAVE is not set -# CONFIG_SND_INTERWAVE_STB is not set -# CONFIG_SND_OPTI92X_AD1848 is not set -# CONFIG_SND_OPTI92X_CS4231 is not set -# CONFIG_SND_OPTI93X is not set -# CONFIG_SND_SB8 is not set -# CONFIG_SND_SB16 is not set -# CONFIG_SND_SBAWE is not set -# CONFIG_SND_WAVEFRONT is not set -# CONFIG_SND_CMI8330 is not set -# CONFIG_SND_OPL3SA2 is not set -# CONFIG_SND_SGALAXY is not set -# CONFIG_SND_SSCAPE is not set - # # PCI devices # -CONFIG_SND_AC97_CODEC=y +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS4000 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set -# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set # CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS5535AUDIO is not set # CONFIG_SND_EMU10K1 is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_YMFPCI is not set -# CONFIG_SND_ALS4000 is not set -# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set -# CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_FM801 is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set -CONFIG_SND_INTEL8X0=y +# CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set -# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_TRIDENT is not set +CONFIG_SND_VIA82XX=y +# CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set # -# ALSA USB devices +# USB devices # # CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_USX2Y is not set # # Open Sound System @@ -959,6 +1193,8 @@ CONFIG_SND_INTEL8X0=y # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -968,6 +1204,8 @@ CONFIG_USB=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set # # USB Host Controller Drivers @@ -975,68 +1213,93 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_OHCI_HCD is not set CONFIG_USB_UHCI_HCD=y +# CONFIG_USB_SL811_HCD is not set # # USB Device Class drivers # -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_BLUETOOTH_TTY is not set -# CONFIG_USB_MIDI is not set +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set # CONFIG_USB_ACM is not set -CONFIG_USB_PRINTER=y +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_HP8200e is not set +# CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_LIBUSUAL is not set # -# USB Human Interface Devices (HID) +# USB Input Devices +# +# CONFIG_USB_HID is not set + # -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_MTOUCH is not set -CONFIG_USB_EGALAX=m +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set # # USB Multimedia devices # # CONFIG_USB_DABUSB is not set +# CONFIG_USB_VICAM is not set +# CONFIG_USB_DSBR is not set +# CONFIG_USB_ET61X251 is not set +# CONFIG_USB_IBMCAM is not set +# CONFIG_USB_KONICAWC is not set +# CONFIG_USB_OV511 is not set +# CONFIG_USB_SE401 is not set +# CONFIG_USB_SN9C102 is not set +# CONFIG_USB_STV680 is not set +# CONFIG_USB_PWC is not set # -# Video4Linux support is needed for USB Multimedia device support -# - -# -# USB Network adaptors +# USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +# CONFIG_USB_MON is not set # # USB port drivers @@ -1053,56 +1316,85 @@ CONFIG_USB_EGALAX=m # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set -# CONFIG_USB_TIGL is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set -CONFIG_USB_CYTHERM=m -CONFIG_USB_PHIDGETSERVO=m +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set +# +# USB DSL modem support +# + # # USB Gadget Support # # CONFIG_USB_GADGET is not set +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# +# EDAC - error detection and reporting (RAS) +# +# CONFIG_EDAC is not set + # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +# CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set -CONFIG_AUTOFS4_FS=y +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y -# CONFIG_ZISOFS is not set -CONFIG_UDF_FS=y +CONFIG_ZISOFS=y +CONFIG_ZISOFS_FS=y +# CONFIG_UDF_FS is not set # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y +# CONFIG_MSDOS_FS is not set CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=850 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # @@ -1111,12 +1403,12 @@ CONFIG_VFAT_FS=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1138,38 +1430,48 @@ CONFIG_RAMFS=y # # Network File Systems # -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -# CONFIG_NFSD_V3 is not set -CONFIG_NFSD_TCP=y -CONFIG_LOCKD=y -CONFIG_EXPORTFS=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set # CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set +CONFIG_CIFS=y +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types # -# CONFIG_PARTITION_ADVANCED is not set +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set # # Native Language Support # CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_DEFAULT="iso8859-15" +# CONFIG_NLS_CODEPAGE_437 is not set # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set +CONFIG_NLS_CODEPAGE_850=y # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set @@ -1189,6 +1491,7 @@ CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set @@ -1199,31 +1502,33 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set +CONFIG_NLS_ISO8859_15=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set +CONFIG_NLS_UTF8=y # -# Profiling support +# Instrumentation Support # -CONFIG_PROFILING=y -CONFIG_OPROFILE=y +# CONFIG_PROFILING is not set +# CONFIG_KPROBES is not set # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set +CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DEBUG_BUGVERBOSE=y CONFIG_EARLY_PRINTK=y -CONFIG_DEBUG_SPINLOCK_SLEEP=y -# CONFIG_FRAME_POINTER is not set -CONFIG_4KSTACKS=y CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y # # Security options # +# CONFIG_KEYS is not set # CONFIG_SECURITY is not set # @@ -1231,14 +1536,19 @@ CONFIG_X86_MPPARSE=y # # CONFIG_CRYPTO is not set +# +# Hardware crypto devices +# + # # Library routines # +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_X86_SMP=y -CONFIG_X86_HT=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y CONFIG_X86_BIOS_REBOOT=y -CONFIG_X86_TRAMPOLINE=y -CONFIG_X86_STD_RESOURCES=y -CONFIG_PC=y +CONFIG_KTIME_SCALAR=y -- cgit v1.2.3-18-g5258 From 489447380a2921ec0e9154f773c44ab3167ede4b Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Thu, 19 Jan 2006 17:56:29 +0000 Subject: [PATCH] handle errors returned by platform_get_irq*() platform_get_irq*() now returns on -ENXIO when the resource cannot be found. Ensure all users of platform_get_irq*() handle this error appropriately. Signed-off-by: David Vrabel Signed-off-by: Greg Kroah-Hartman --- arch/arm/common/locomo.c | 2 ++ arch/arm/common/sa1111.c | 2 ++ 2 files changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index d31b1cb7eea..23609400a8e 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -788,6 +788,8 @@ static int locomo_probe(struct platform_device *dev) if (!mem) return -EINVAL; irq = platform_get_irq(dev, 0); + if (irq < 0) + return -ENXIO; return __locomo_probe(&dev->dev, mem, irq); } diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 1475089f9b4..93352f6097c 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -943,6 +943,8 @@ static int sa1111_probe(struct platform_device *pdev) if (!mem) return -EINVAL; irq = platform_get_irq(pdev, 0); + if (irq < 0) + return -ENXIO; return __sa1111_probe(&pdev->dev, mem, irq); } -- cgit v1.2.3-18-g5258 From 9f28bb7e1d0188a993403ab39b774785892805e1 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Mar 2006 13:17:13 -0800 Subject: [PATCH] add EXPORT_SYMBOL_GPL_FUTURE() This patch adds the ability to mark symbols that will be changed in the future, so that kernel modules that don't include MODULE_LICENSE("GPL") and use the symbols, will be flagged and printed out to the system log. Signed-off-by: Greg Kroah-Hartman --- arch/m68knommu/kernel/vmlinux.lds.S | 10 ++++++++++ arch/v850/kernel/vmlinux.lds.S | 8 ++++++++ 2 files changed, 18 insertions(+) (limited to 'arch') diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S index ac9de2661c0..a331cc90797 100644 --- a/arch/m68knommu/kernel/vmlinux.lds.S +++ b/arch/m68knommu/kernel/vmlinux.lds.S @@ -269,6 +269,11 @@ SECTIONS { *(__ksymtab_gpl) __stop___ksymtab_gpl = .; + /* Kernel symbol table: GPL-future symbols */ + __start___ksymtab_gpl_future = .; + *(__ksymtab_gpl_future) + __stop___ksymtab_gpl_future = .; + /* Kernel symbol table: Normal symbols */ __start___kcrctab = .; *(__kcrctab) @@ -279,6 +284,11 @@ SECTIONS { *(__kcrctab_gpl) __stop___kcrctab_gpl = .; + /* Kernel symbol table: GPL-future symbols */ + __start___kcrctab_gpl_future = .; + *(__kcrctab_gpl_future) + __stop___kcrctab_gpl_future = .; + /* Kernel symbol table: strings */ *(__ksymtab_strings) diff --git a/arch/v850/kernel/vmlinux.lds.S b/arch/v850/kernel/vmlinux.lds.S index 5be05f47109..5b2ffcc6e2b 100644 --- a/arch/v850/kernel/vmlinux.lds.S +++ b/arch/v850/kernel/vmlinux.lds.S @@ -64,6 +64,10 @@ ___start___ksymtab_gpl = .; \ *(__ksymtab_gpl) \ ___stop___ksymtab_gpl = .; \ + /* Kernel symbol table: GPL-future symbols */ \ + ___start___ksymtab_gpl_future = .; \ + *(__ksymtab_gpl_future) \ + ___stop___ksymtab_gpl_future = .; \ /* Kernel symbol table: strings */ \ *(__ksymtab_strings) \ /* Kernel symbol table: Normal symbols */ \ @@ -74,6 +78,10 @@ ___start___kcrctab_gpl = .; \ *(__kcrctab_gpl) \ ___stop___kcrctab_gpl = .; \ + /* Kernel symbol table: GPL-future symbols */ \ + ___start___kcrctab_gpl_future = .; \ + *(__kcrctab_gpl_future) \ + ___stop___kcrctab_gpl_future = .; \ /* Built-in module parameters */ \ . = ALIGN (4) ; \ ___start___param = .; \ -- cgit v1.2.3-18-g5258 From 76fa9a240de4294a097235c9ddd470c21eb3449e Mon Sep 17 00:00:00 2001 From: Jordan Crouse Date: Fri, 20 Jan 2006 14:06:09 -0800 Subject: [PATCH] USB: EHCI for AU1200 ALCHEMY: Add EHCI support for AU1200 Updated by removing the OHCI support Signed-off-by: Jordan Crouse Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- arch/mips/au1000/common/cputable.c | 2 +- arch/mips/au1000/common/platform.c | 2 -- 2 files changed, 1 insertion(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/mips/au1000/common/cputable.c b/arch/mips/au1000/common/cputable.c index 4dbde82c821..d8df5fdb045 100644 --- a/arch/mips/au1000/common/cputable.c +++ b/arch/mips/au1000/common/cputable.c @@ -38,7 +38,7 @@ struct cpu_spec cpu_specs[] = { { 0xffffffff, 0x02030204, "Au1100 BE", 0, 1 }, { 0xffffffff, 0x03030200, "Au1550 AA", 0, 1 }, { 0xffffffff, 0x04030200, "Au1200 AB", 0, 0 }, - { 0xffffffff, 0x04030201, "Au1200 AC", 0, 1 }, + { 0xffffffff, 0x04030201, "Au1200 AC", 1, 0 }, { 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0 }, }; diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c index 48d3f54f88f..1fb3dbdb93b 100644 --- a/arch/mips/au1000/common/platform.c +++ b/arch/mips/au1000/common/platform.c @@ -278,9 +278,7 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = { &au1100_lcd_device, #endif #ifdef CONFIG_SOC_AU1200 -#if 0 /* fixme */ &au1xxx_usb_ehci_device, -#endif &au1xxx_usb_gdt_device, &au1xxx_usb_otg_device, &au1200_lcd_device, -- cgit v1.2.3-18-g5258 From d5fb7f1b5b832946eaf450b2a695ec3e7fd2d351 Mon Sep 17 00:00:00 2001 From: Jordan Crouse Date: Fri, 20 Jan 2006 14:09:54 -0800 Subject: [PATCH] USB: OHCI for AU1200 ALCHEMY: Add OHCI support for AU1200 Updated by moving the OHCI support out of the EHCI patch. Signed-off-by: Jordan Crouse Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- arch/mips/au1000/common/platform.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c index 1fb3dbdb93b..dbb4ee7ed42 100644 --- a/arch/mips/au1000/common/platform.c +++ b/arch/mips/au1000/common/platform.c @@ -20,7 +20,7 @@ static struct resource au1xxx_usb_ohci_resources[] = { [0] = { .start = USB_OHCI_BASE, - .end = USB_OHCI_BASE + USB_OHCI_LEN, + .end = USB_OHCI_BASE + USB_OHCI_LEN - 1, .flags = IORESOURCE_MEM, }, [1] = { -- cgit v1.2.3-18-g5258 From 55e9dce37ddf3ab358ba1d1e9eef4ee4bd8174a6 Mon Sep 17 00:00:00 2001 From: David McCullough Date: Wed, 15 Mar 2006 21:08:51 +1100 Subject: [CRYPTO] aes: Fixed array boundary violation The AES setkey routine writes 64 bytes to the E_KEY area even though there are only 60 bytes there. It is in fact safe since E_KEY is immediately follwed by D_KEY which is initialised afterwards. However, doing this may trigger undefined behaviour and makes Coverity unhappy. So by combining E_KEY and D_KEY into one array we sidestep this issue altogether. This problem was reported by Adrian Bunk. Signed-off-by: Herbert Xu --- arch/x86_64/crypto/aes.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/crypto/aes.c b/arch/x86_64/crypto/aes.c index fb1b961a2e2..6f77e7700d3 100644 --- a/arch/x86_64/crypto/aes.c +++ b/arch/x86_64/crypto/aes.c @@ -77,12 +77,11 @@ static inline u8 byte(const u32 x, const unsigned n) struct aes_ctx { u32 key_length; - u32 E[60]; - u32 D[60]; + u32 buf[120]; }; -#define E_KEY ctx->E -#define D_KEY ctx->D +#define E_KEY (&ctx->buf[0]) +#define D_KEY (&ctx->buf[60]) static u8 pow_tab[256] __initdata; static u8 log_tab[256] __initdata; -- cgit v1.2.3-18-g5258 From e87dddeb92618d9dbb8b9f946a193739a4447609 Mon Sep 17 00:00:00 2001 From: Peter Horton Date: Sun, 12 Feb 2006 17:10:25 +0000 Subject: [MIPS] Add early console for Cobalt. Signed-off-by: Peter Horton Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 1 + arch/mips/cobalt/Kconfig | 7 +++++++ arch/mips/cobalt/Makefile | 2 ++ arch/mips/cobalt/console.c | 43 +++++++++++++++++++++++++++++++++++++++++++ arch/mips/cobalt/setup.c | 13 +++++-------- 5 files changed, 58 insertions(+), 8 deletions(-) create mode 100644 arch/mips/cobalt/Kconfig create mode 100644 arch/mips/cobalt/console.c (limited to 'arch') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 3a0f89d2c8d..9d1e78f9c06 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -790,6 +790,7 @@ source "arch/mips/tx4927/Kconfig" source "arch/mips/tx4938/Kconfig" source "arch/mips/vr41xx/Kconfig" source "arch/mips/philips/pnx8550/common/Kconfig" +source "arch/mips/cobalt/Kconfig" endmenu diff --git a/arch/mips/cobalt/Kconfig b/arch/mips/cobalt/Kconfig new file mode 100644 index 00000000000..7c42b088d16 --- /dev/null +++ b/arch/mips/cobalt/Kconfig @@ -0,0 +1,7 @@ +config EARLY_PRINTK + bool "Early console support" + depends on MIPS_COBALT + help + Provide early console support by direct access to the + on board UART. The UART must have been previously + initialised by the boot loader. diff --git a/arch/mips/cobalt/Makefile b/arch/mips/cobalt/Makefile index 3b6b7579d1d..720e757b2b6 100644 --- a/arch/mips/cobalt/Makefile +++ b/arch/mips/cobalt/Makefile @@ -4,4 +4,6 @@ obj-y := irq.o int-handler.o reset.o setup.o +obj-$(CONFIG_EARLY_PRINTK) += console.o + EXTRA_AFLAGS := $(CFLAGS) diff --git a/arch/mips/cobalt/console.c b/arch/mips/cobalt/console.c new file mode 100644 index 00000000000..45c2d27c756 --- /dev/null +++ b/arch/mips/cobalt/console.c @@ -0,0 +1,43 @@ +/* + * (C) P. Horton 2006 + */ + +#include +#include +#include +#include +#include +#include +#include + +static void putchar(int c) +{ + if(c == '\n') + putchar('\r'); + + while(!(COBALT_UART[UART_LSR] & UART_LSR_THRE)) + ; + + COBALT_UART[UART_TX] = c; +} + +static void cons_write(struct console *c, const char *s, unsigned n) +{ + while(n-- && *s) + putchar(*s++); +} + +static struct console cons_info = +{ + .name = "uart", + .write = cons_write, + .flags = CON_PRINTBUFFER | CON_BOOT, + .index = -1, +}; + +void __init cobalt_early_console(void) +{ + register_console(&cons_info); + + printk("Cobalt: early console registered\n"); +} diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c index b9713a72305..4f9ea121002 100644 --- a/arch/mips/cobalt/setup.c +++ b/arch/mips/cobalt/setup.c @@ -31,6 +31,7 @@ extern void cobalt_machine_restart(char *command); extern void cobalt_machine_halt(void); extern void cobalt_machine_power_off(void); +extern void cobalt_early_console(void); int cobalt_board_id; @@ -109,14 +110,6 @@ void __init plat_setup(void) /* I/O port resource must include UART and LCD/buttons */ ioport_resource.end = 0x0fffffff; - /* - * This is a prom style console. We just poke at the - * UART to make it talk. - * Only use this console if you really screw up and can't - * get to the stage of setting up a real serial console. - */ - /*ns16550_setup_console();*/ - /* request I/O space for devices used on all i[345]86 PCs */ for (i = 0; i < COBALT_IO_RESOURCES; i++) request_resource(&ioport_resource, cobalt_io_resources + i); @@ -136,6 +129,10 @@ void __init plat_setup(void) #ifdef CONFIG_SERIAL_8250 if (cobalt_board_id > COBALT_BRD_ID_RAQ1) { +#ifdef CONFIG_EARLY_PRINTK + cobalt_early_console(); +#endif + uart.line = 0; uart.type = PORT_UNKNOWN; uart.uartclk = 18432000; -- cgit v1.2.3-18-g5258 From 37caa934af02bc01d0e1366a49e1c89360fa0f29 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Wed, 15 Feb 2006 18:25:48 +0900 Subject: [MIPS] sc-rm7k.c cleanup Use blast_scache_range, blast_inv_scache_range for rm7k scache routine. Output code should be logically same. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/mm/sc-rm7k.c | 25 +++++++++---------------- 1 file changed, 9 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/mips/mm/sc-rm7k.c b/arch/mips/mm/sc-rm7k.c index 9e8ff8badb1..3b6cc9ba1b0 100644 --- a/arch/mips/mm/sc-rm7k.c +++ b/arch/mips/mm/sc-rm7k.c @@ -9,6 +9,7 @@ #include #include #include +#include #include #include @@ -43,14 +44,7 @@ static void rm7k_sc_wback_inv(unsigned long addr, unsigned long size) /* Catch bad driver code */ BUG_ON(size == 0); - a = addr & ~(sc_lsize - 1); - end = (addr + size - 1) & ~(sc_lsize - 1); - while (1) { - flush_scache_line(a); /* Hit_Writeback_Inv_SD */ - if (a == end) - break; - a += sc_lsize; - } + blast_scache_range(addr, addr + size); if (!rm7k_tcache_enabled) return; @@ -74,14 +68,7 @@ static void rm7k_sc_inv(unsigned long addr, unsigned long size) /* Catch bad driver code */ BUG_ON(size == 0); - a = addr & ~(sc_lsize - 1); - end = (addr + size - 1) & ~(sc_lsize - 1); - while (1) { - invalidate_scache_line(a); /* Hit_Invalidate_SD */ - if (a == end) - break; - a += sc_lsize; - } + blast_inv_scache_range(addr, addr + size); if (!rm7k_tcache_enabled) return; @@ -143,11 +130,17 @@ struct bcache_ops rm7k_sc_ops = { void __init rm7k_sc_init(void) { + struct cpuinfo_mips *c = ¤t_cpu_data; unsigned int config = read_c0_config(); if ((config & RM7K_CONF_SC)) return; + c->scache.linesz = sc_lsize; + c->scache.ways = 4; + c->scache.waybit= ffs(scache_size / c->scache.ways) - 1; + c->scache.waysize = scache_size / c->scache.ways; + c->scache.sets = scache_size / (c->scache.linesz * c->scache.ways); printk(KERN_INFO "Secondary cache size %dK, linesize %d bytes.\n", (scache_size >> 10), sc_lsize); -- cgit v1.2.3-18-g5258 From c1449c8fa40859eb269025a7db85b34115205f5b Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 15 Feb 2006 15:17:19 +0000 Subject: [MIPS] Symmetric Uniprocessor support for Qemu. SMP bits needed to builds and run an SMP kernel. While only a single processor is supported ATM it's still useful for some SMP debugging using Qemu. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 2 +- arch/mips/qemu/Makefile | 2 ++ arch/mips/qemu/q-smp.c | 48 ++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 51 insertions(+), 1 deletion(-) create mode 100644 arch/mips/qemu/q-smp.c (limited to 'arch') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 9d1e78f9c06..6356f7d52ce 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1582,7 +1582,7 @@ source "mm/Kconfig" config SMP bool "Multi-Processing support" - depends on CPU_RM9000 || ((SIBYTE_BCM1x80 || SIBYTE_BCM1x55 || SIBYTE_SB1250) && !SIBYTE_STANDALONE) || SGI_IP27 || MIPS_MT_SMP + depends on CPU_RM9000 || ((SIBYTE_BCM1x80 || SIBYTE_BCM1x55 || SIBYTE_SB1250 || QEMU) && !SIBYTE_STANDALONE) || SGI_IP27 || MIPS_MT_SMP ---help--- This enables support for systems with more than one CPU. If you have a system with only one CPU, like most personal computers, say N. If diff --git a/arch/mips/qemu/Makefile b/arch/mips/qemu/Makefile index 934944ab9e8..6a8e8bcef55 100644 --- a/arch/mips/qemu/Makefile +++ b/arch/mips/qemu/Makefile @@ -3,3 +3,5 @@ # obj-y = q-firmware.o q-int.o q-irq.o q-mem.o q-setup.o + +obj-$(CONFIG_SMP) += q-smp.o diff --git a/arch/mips/qemu/q-smp.c b/arch/mips/qemu/q-smp.c new file mode 100644 index 00000000000..5a12354cd57 --- /dev/null +++ b/arch/mips/qemu/q-smp.c @@ -0,0 +1,48 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 by Ralf Baechle (ralf@linux-mips.org) + * + * Symmetric Uniprocessor (TM) Support + */ +#include +#include + +/* + * Send inter-processor interrupt + */ +void core_send_ipi(int cpu, unsigned int action) +{ + panic(KERN_ERR "%s called", __FUNCTION__); +} + +/* + * After we've done initial boot, this function is called to allow the + * board code to clean up state, if needed + */ +void prom_init_secondary(void) +{ +} + +void prom_smp_finish(void) +{ +} + +/* Hook for after all CPUs are online */ +void prom_cpus_done(void) +{ +} + +void __init prom_prepare_cpus(unsigned int max_cpus) +{ + cpus_clear(phys_cpu_present_map); +} + +/* + * Firmware CPU startup hook + */ +void prom_boot_secondary(int cpu, struct task_struct *idle) +{ +} -- cgit v1.2.3-18-g5258 From af2667f7efa64706c78b8bee1398726fc86b42ad Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sun, 19 Feb 2006 03:20:07 +0000 Subject: [MIPS] Delete unused sys32_waitpid. Signed-off-by: Ralf Baechle --- arch/mips/kernel/linux32.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index e00e5f6e7fd..396592467da 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -161,12 +161,6 @@ out: return error; } -asmlinkage int -sys32_waitpid(compat_pid_t pid, unsigned int *stat_addr, int options) -{ - return compat_sys_wait4(pid, stat_addr, options, NULL); -} - asmlinkage long sysn32_waitid(int which, compat_pid_t pid, siginfo_t __user *uinfo, int options, -- cgit v1.2.3-18-g5258 From 6254944faf5ff96b8b468457e3e2b2dcacc29fb7 Mon Sep 17 00:00:00 2001 From: Martin Michlmayr Date: Sat, 18 Feb 2006 20:06:32 +0000 Subject: [MIPS] Reformat all of signal32.c with tabs instead of space for consistency Signed-off-by: Martin Michlmayr Signed-off-by: Ralf Baechle --- arch/mips/kernel/signal32.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index 237cd8a2cd3..f2791a1e760 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -236,7 +236,7 @@ _sys32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs) spin_lock_irq(¤t->sighand->siglock); current->saved_sigmask = current->blocked; current->blocked = newset; - recalc_sigpending(); + recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); current->state = TASK_INTERRUPTIBLE; @@ -272,15 +272,15 @@ asmlinkage int sys32_sigaction(int sig, const struct sigaction32 *act, if (!ret && oact) { if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact))) - return -EFAULT; + return -EFAULT; err |= __put_user(old_ka.sa.sa_flags, &oact->sa_flags); err |= __put_user((u32)(u64)old_ka.sa.sa_handler, &oact->sa_handler); err |= __put_user(old_ka.sa.sa_mask.sig[0], oact->sa_mask.sig); - err |= __put_user(0, &oact->sa_mask.sig[1]); - err |= __put_user(0, &oact->sa_mask.sig[2]); - err |= __put_user(0, &oact->sa_mask.sig[3]); - if (err) + err |= __put_user(0, &oact->sa_mask.sig[1]); + err |= __put_user(0, &oact->sa_mask.sig[2]); + err |= __put_user(0, &oact->sa_mask.sig[3]); + if (err) return -EFAULT; } -- cgit v1.2.3-18-g5258 From 9c6031cc93626a194a9ef32d62b078ef1b396c45 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Sun, 19 Feb 2006 23:46:44 +0900 Subject: [MIPS] Signal cleanup Move function prototypes to asm/signal.h to detect trivial errors and add some __user tags to get rid of sparse warnings. Generated code should not be changed. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/kernel/process.c | 16 ---------------- arch/mips/kernel/signal.c | 6 +++--- arch/mips/kernel/signal32.c | 24 ++++++++++++------------ arch/mips/kernel/signal_n32.c | 2 +- 4 files changed, 16 insertions(+), 32 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index 092679c2dca..a8f435d8294 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -60,17 +60,9 @@ ATTRIB_NORET void cpu_idle(void) } } -extern void do_signal(struct pt_regs *regs); -extern void do_signal32(struct pt_regs *regs); - /* * Native o32 and N64 ABI without DSP ASE */ -extern int setup_frame(struct k_sigaction * ka, struct pt_regs *regs, - int signr, sigset_t *set); -extern int setup_rt_frame(struct k_sigaction * ka, struct pt_regs *regs, - int signr, sigset_t *set, siginfo_t *info); - struct mips_abi mips_abi = { .do_signal = do_signal, #ifdef CONFIG_TRAD_SIGNALS @@ -83,11 +75,6 @@ struct mips_abi mips_abi = { /* * o32 compatibility on 64-bit kernels, without DSP ASE */ -extern int setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs, - int signr, sigset_t *set); -extern int setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs, - int signr, sigset_t *set, siginfo_t *info); - struct mips_abi mips_abi_32 = { .do_signal = do_signal32, .setup_frame = setup_frame_32, @@ -99,9 +86,6 @@ struct mips_abi mips_abi_32 = { /* * N32 on 64-bit kernels, without DSP ASE */ -extern int setup_rt_frame_n32(struct k_sigaction * ka, struct pt_regs *regs, - int signr, sigset_t *set, siginfo_t *info); - struct mips_abi mips_abi_n32 = { .do_signal = do_signal, .setup_rt_frame = setup_rt_frame_n32 diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index c974cc9b30e..402efd27c79 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -100,8 +100,8 @@ _sys_rt_sigsuspend(nabi_no_regargs struct pt_regs regs) } #ifdef CONFIG_TRAD_SIGNALS -asmlinkage int sys_sigaction(int sig, const struct sigaction *act, - struct sigaction *oact) +asmlinkage int sys_sigaction(int sig, const struct sigaction __user *act, + struct sigaction __user *oact) { struct k_sigaction new_ka, old_ka; int ret; @@ -331,7 +331,7 @@ int setup_rt_frame(struct k_sigaction * ka, struct pt_regs *regs, /* Create the ucontext. */ err |= __put_user(0, &frame->rs_uc.uc_flags); err |= __put_user(NULL, &frame->rs_uc.uc_link); - err |= __put_user((void *)current->sas_ss_sp, + err |= __put_user((void __user *)current->sas_ss_sp, &frame->rs_uc.uc_stack.ss_sp); err |= __put_user(sas_ss_flags(regs->regs[29]), &frame->rs_uc.uc_stack.ss_flags); diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index f2791a1e760..1c7241ba692 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -163,7 +163,7 @@ static inline int put_sigset(const sigset_t *kbuf, compat_sigset_t __user *ubuf) return err; } -static inline int get_sigset(sigset_t *kbuf, const compat_sigset_t *ubuf) +static inline int get_sigset(sigset_t *kbuf, const compat_sigset_t __user *ubuf) { int err = 0; unsigned long sig[4]; @@ -195,10 +195,10 @@ save_static_function(sys32_sigsuspend); __attribute_used__ noinline static int _sys32_sigsuspend(nabi_no_regargs struct pt_regs regs) { - compat_sigset_t *uset; + compat_sigset_t __user *uset; sigset_t newset; - uset = (compat_sigset_t *) regs.regs[4]; + uset = (compat_sigset_t __user *) regs.regs[4]; if (get_sigset(&newset, uset)) return -EFAULT; sigdelsetmask(&newset, ~_BLOCKABLE); @@ -219,7 +219,7 @@ save_static_function(sys32_rt_sigsuspend); __attribute_used__ noinline static int _sys32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs) { - compat_sigset_t *uset; + compat_sigset_t __user *uset; sigset_t newset; size_t sigsetsize; @@ -228,7 +228,7 @@ _sys32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs) if (sigsetsize != sizeof(compat_sigset_t)) return -EINVAL; - uset = (compat_sigset_t *) regs.regs[4]; + uset = (compat_sigset_t __user *) regs.regs[4]; if (get_sigset(&newset, uset)) return -EFAULT; sigdelsetmask(&newset, ~_BLOCKABLE); @@ -245,8 +245,8 @@ _sys32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs) return -ERESTARTNOHAND; } -asmlinkage int sys32_sigaction(int sig, const struct sigaction32 *act, - struct sigaction32 *oact) +asmlinkage int sys32_sigaction(int sig, const struct sigaction32 __user *act, + struct sigaction32 __user *oact) { struct k_sigaction new_ka, old_ka; int ret; @@ -301,7 +301,7 @@ asmlinkage int sys32_sigaltstack(nabi_no_regargs struct pt_regs regs) if (!access_ok(VERIFY_READ, uss, sizeof(*uss))) return -EFAULT; err |= __get_user(sp, &uss->ss_sp); - kss.ss_sp = (void *) (long) sp; + kss.ss_sp = (void __user *) (long) sp; err |= __get_user(kss.ss_size, &uss->ss_size); err |= __get_user(kss.ss_flags, &uss->ss_flags); if (err) @@ -316,7 +316,7 @@ asmlinkage int sys32_sigaltstack(nabi_no_regargs struct pt_regs regs) if (!ret && uoss) { if (!access_ok(VERIFY_WRITE, uoss, sizeof(*uoss))) return -EFAULT; - sp = (int) (long) koss.ss_sp; + sp = (int) (unsigned long) koss.ss_sp; err |= __put_user(sp, &uoss->ss_sp); err |= __put_user(koss.ss_size, &uoss->ss_size); err |= __put_user(koss.ss_flags, &uoss->ss_flags); @@ -527,7 +527,7 @@ _sys32_rt_sigreturn(nabi_no_regargs struct pt_regs regs) /* The ucontext contains a stack32_t, so we must convert! */ if (__get_user(sp, &frame->rs_uc.uc_stack.ss_sp)) goto badframe; - st.ss_sp = (void *)(long) sp; + st.ss_sp = (void __user *)(long) sp; if (__get_user(st.ss_size, &frame->rs_uc.uc_stack.ss_size)) goto badframe; if (__get_user(st.ss_flags, &frame->rs_uc.uc_stack.ss_flags)) @@ -868,7 +868,7 @@ no_signal: } } -asmlinkage int sys32_rt_sigaction(int sig, const struct sigaction32 *act, +asmlinkage int sys32_rt_sigaction(int sig, const struct sigaction32 __user *act, struct sigaction32 __user *oact, unsigned int sigsetsize) { @@ -912,7 +912,7 @@ out: return ret; } -asmlinkage int sys32_rt_sigprocmask(int how, compat_sigset_t *set, +asmlinkage int sys32_rt_sigprocmask(int how, compat_sigset_t __user *set, compat_sigset_t __user *oset, unsigned int sigsetsize) { sigset_t old_set, new_set; diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c index 3e168c08a3a..220e6deb3aa 100644 --- a/arch/mips/kernel/signal_n32.c +++ b/arch/mips/kernel/signal_n32.c @@ -141,7 +141,7 @@ _sysn32_rt_sigreturn(nabi_no_regargs struct pt_regs regs) /* The ucontext contains a stack32_t, so we must convert! */ if (__get_user(sp, &frame->rs_uc.uc_stack.ss_sp)) goto badframe; - st.ss_sp = (void *)(long) sp; + st.ss_sp = (void __user *)(long) sp; if (__get_user(st.ss_size, &frame->rs_uc.uc_stack.ss_size)) goto badframe; if (__get_user(st.ss_flags, &frame->rs_uc.uc_stack.ss_flags)) -- cgit v1.2.3-18-g5258 From b1bcb362d921f5e46a3bec0c7a73c32abfe74db2 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 21 Feb 2006 01:27:59 +0900 Subject: [MIPS] fix wrong __user usage in _sysn32_rt_sigsuspend Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/kernel/signal_n32.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c index 220e6deb3aa..477c5334ec1 100644 --- a/arch/mips/kernel/signal_n32.c +++ b/arch/mips/kernel/signal_n32.c @@ -87,7 +87,8 @@ save_static_function(sysn32_rt_sigsuspend); __attribute_used__ noinline static int _sysn32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs) { - compat_sigset_t __user *unewset, uset; + compat_sigset_t __user *unewset; + compat_sigset_t uset; size_t sigsetsize; sigset_t newset; -- cgit v1.2.3-18-g5258 From 219ac73a7ad17a3ae3d5c07b4fc8c280645a073a Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 21 Feb 2006 16:05:11 +0900 Subject: [MIPS] Further sparsification for 32-bit compat code. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/kernel/linux32.c | 170 +++++++++++++++++++++++---------------------- arch/mips/kernel/syscall.c | 2 +- 2 files changed, 88 insertions(+), 84 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index 396592467da..1e8d24823d3 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -69,7 +69,7 @@ * Revalidate the inode. This is required for proper NFS attribute caching. */ -int cp_compat_stat(struct kstat *stat, struct compat_stat *statbuf) +int cp_compat_stat(struct kstat *stat, struct compat_stat __user *statbuf) { struct compat_stat tmp; @@ -125,7 +125,7 @@ out: } -asmlinkage int sys_truncate64(const char *path, unsigned int high, +asmlinkage int sys_truncate64(const char __user *path, unsigned int high, unsigned int low) { if ((int)high < 0) @@ -169,6 +169,7 @@ sysn32_waitid(int which, compat_pid_t pid, struct rusage ru; long ret; mm_segment_t old_fs = get_fs(); + int si_signo; if (!access_ok(VERIFY_WRITE, uinfo, sizeof(*uinfo))) return -EFAULT; @@ -178,7 +179,9 @@ sysn32_waitid(int which, compat_pid_t pid, uru ? (struct rusage __user *) &ru : NULL); set_fs (old_fs); - if (ret < 0 || uinfo->si_signo == 0) + if (__get_user(si_signo, &uinfo->si_signo)) + return -EFAULT; + if (ret < 0 || si_signo == 0) return ret; if (uru) @@ -202,14 +205,14 @@ struct sysinfo32 { char _f[8]; }; -asmlinkage int sys32_sysinfo(struct sysinfo32 *info) +asmlinkage int sys32_sysinfo(struct sysinfo32 __user *info) { struct sysinfo s; int ret, err; mm_segment_t old_fs = get_fs (); set_fs (KERNEL_DS); - ret = sys_sysinfo(&s); + ret = sys_sysinfo((struct sysinfo __user *)&s); set_fs (old_fs); err = put_user (s.uptime, &info->uptime); err |= __put_user (s.loads[0], &info->loads[0]); @@ -239,11 +242,11 @@ struct rlimit32 { }; #ifdef __MIPSEB__ -asmlinkage long sys32_truncate64(const char * path, unsigned long __dummy, +asmlinkage long sys32_truncate64(const char __user * path, unsigned long __dummy, int length_hi, int length_lo) #endif #ifdef __MIPSEL__ -asmlinkage long sys32_truncate64(const char * path, unsigned long __dummy, +asmlinkage long sys32_truncate64(const char __user * path, unsigned long __dummy, int length_lo, int length_hi) #endif { @@ -271,7 +274,7 @@ asmlinkage long sys32_ftruncate64(unsigned int fd, unsigned long __dummy, } static inline long -get_tv32(struct timeval *o, struct compat_timeval *i) +get_tv32(struct timeval *o, struct compat_timeval __user *i) { return (!access_ok(VERIFY_READ, i, sizeof(*i)) || (__get_user(o->tv_sec, &i->tv_sec) | @@ -279,7 +282,7 @@ get_tv32(struct timeval *o, struct compat_timeval *i) } static inline long -put_tv32(struct compat_timeval *o, struct timeval *i) +put_tv32(struct compat_timeval __user *o, struct timeval *i) { return (!access_ok(VERIFY_WRITE, o, sizeof(*o)) || (__put_user(i->tv_sec, &o->tv_sec) | @@ -289,7 +292,7 @@ put_tv32(struct compat_timeval *o, struct timeval *i) extern struct timezone sys_tz; asmlinkage int -sys32_gettimeofday(struct compat_timeval *tv, struct timezone *tz) +sys32_gettimeofday(struct compat_timeval __user *tv, struct timezone __user *tz) { if (tv) { struct timeval ktv; @@ -304,7 +307,7 @@ sys32_gettimeofday(struct compat_timeval *tv, struct timezone *tz) return 0; } -static inline long get_ts32(struct timespec *o, struct compat_timeval *i) +static inline long get_ts32(struct timespec *o, struct compat_timeval __user *i) { long usec; @@ -319,7 +322,7 @@ static inline long get_ts32(struct timespec *o, struct compat_timeval *i) } asmlinkage int -sys32_settimeofday(struct compat_timeval *tv, struct timezone *tz) +sys32_settimeofday(struct compat_timeval __user *tv, struct timezone __user *tz) { struct timespec kts; struct timezone ktz; @@ -337,7 +340,7 @@ sys32_settimeofday(struct compat_timeval *tv, struct timezone *tz) } asmlinkage int sys32_llseek(unsigned int fd, unsigned int offset_high, - unsigned int offset_low, loff_t * result, + unsigned int offset_low, loff_t __user * result, unsigned int origin) { return sys_llseek(fd, offset_high, offset_low, result, origin); @@ -347,12 +350,12 @@ asmlinkage int sys32_llseek(unsigned int fd, unsigned int offset_high, lseek back to original location. They fail just like lseek does on non-seekable files. */ -asmlinkage ssize_t sys32_pread(unsigned int fd, char * buf, +asmlinkage ssize_t sys32_pread(unsigned int fd, char __user * buf, size_t count, u32 unused, u64 a4, u64 a5) { ssize_t ret; struct file * file; - ssize_t (*read)(struct file *, char *, size_t, loff_t *); + ssize_t (*read)(struct file *, char __user *, size_t, loff_t *); loff_t pos; ret = -EBADF; @@ -382,12 +385,12 @@ bad_file: return ret; } -asmlinkage ssize_t sys32_pwrite(unsigned int fd, const char * buf, +asmlinkage ssize_t sys32_pwrite(unsigned int fd, const char __user * buf, size_t count, u32 unused, u64 a4, u64 a5) { ssize_t ret; struct file * file; - ssize_t (*write)(struct file *, const char *, size_t, loff_t *); + ssize_t (*write)(struct file *, const char __user *, size_t, loff_t *); loff_t pos; ret = -EBADF; @@ -420,14 +423,14 @@ bad_file: } asmlinkage int sys32_sched_rr_get_interval(compat_pid_t pid, - struct compat_timespec *interval) + struct compat_timespec __user *interval) { struct timespec t; int ret; mm_segment_t old_fs = get_fs (); set_fs (KERNEL_DS); - ret = sys_sched_rr_get_interval(pid, &t); + ret = sys_sched_rr_get_interval(pid, (struct timespec __user *)&t); set_fs (old_fs); if (put_user (t.tv_sec, &interval->tv_sec) || __put_user (t.tv_nsec, &interval->tv_nsec)) @@ -545,7 +548,7 @@ struct ipc_kludge32 { }; static int -do_sys32_semctl(int first, int second, int third, void *uptr) +do_sys32_semctl(int first, int second, int third, void __user *uptr) { union semun fourth; u32 pad; @@ -556,12 +559,12 @@ do_sys32_semctl(int first, int second, int third, void *uptr) if (!uptr) return -EINVAL; err = -EFAULT; - if (get_user (pad, (u32 *)uptr)) + if (get_user (pad, (u32 __user *)uptr)) return err; if ((third & ~IPC_64) == SETVAL) fourth.val = (int)pad; else - fourth.__pad = (void *)A(pad); + fourth.__pad = (void __user *)A(pad); switch (third & ~IPC_64) { case IPC_INFO: case IPC_RMID: @@ -579,14 +582,14 @@ do_sys32_semctl(int first, int second, int third, void *uptr) case IPC_STAT: case SEM_STAT: - fourth.__pad = &s; + fourth.__pad = (struct semid64_ds __user *)&s; old_fs = get_fs(); set_fs(KERNEL_DS); err = sys_semctl(first, second, third | IPC_64, fourth); set_fs(old_fs); if (third & IPC_64) { - struct semid64_ds32 *usp64 = (struct semid64_ds32 *) A(pad); + struct semid64_ds32 __user *usp64 = (struct semid64_ds32 __user *) A(pad); if (!access_ok(VERIFY_WRITE, usp64, sizeof(*usp64))) { err = -EFAULT; @@ -603,7 +606,7 @@ do_sys32_semctl(int first, int second, int third, void *uptr) err2 |= __put_user(s.sem_ctime, &usp64->sem_ctime); err2 |= __put_user(s.sem_nsems, &usp64->sem_nsems); } else { - struct semid_ds32 *usp32 = (struct semid_ds32 *) A(pad); + struct semid_ds32 __user *usp32 = (struct semid_ds32 __user *) A(pad); if (!access_ok(VERIFY_WRITE, usp32, sizeof(*usp32))) { err = -EFAULT; @@ -633,9 +636,9 @@ do_sys32_semctl(int first, int second, int third, void *uptr) } static int -do_sys32_msgsnd (int first, int second, int third, void *uptr) +do_sys32_msgsnd (int first, int second, int third, void __user *uptr) { - struct msgbuf32 *up = (struct msgbuf32 *)uptr; + struct msgbuf32 __user *up = (struct msgbuf32 __user *)uptr; struct msgbuf *p; mm_segment_t old_fs; int err; @@ -654,7 +657,7 @@ do_sys32_msgsnd (int first, int second, int third, void *uptr) goto out; old_fs = get_fs (); set_fs (KERNEL_DS); - err = sys_msgsnd (first, p, second, third); + err = sys_msgsnd (first, (struct msgbuf __user *)p, second, third); set_fs (old_fs); out: kfree (p); @@ -664,15 +667,15 @@ out: static int do_sys32_msgrcv (int first, int second, int msgtyp, int third, - int version, void *uptr) + int version, void __user *uptr) { - struct msgbuf32 *up; + struct msgbuf32 __user *up; struct msgbuf *p; mm_segment_t old_fs; int err; if (!version) { - struct ipc_kludge32 *uipck = (struct ipc_kludge32 *)uptr; + struct ipc_kludge32 __user *uipck = (struct ipc_kludge32 __user *)uptr; struct ipc_kludge32 ipck; err = -EINVAL; @@ -681,7 +684,7 @@ do_sys32_msgrcv (int first, int second, int msgtyp, int third, err = -EFAULT; if (copy_from_user (&ipck, uipck, sizeof (struct ipc_kludge32))) goto out; - uptr = (void *)AA(ipck.msgp); + uptr = (void __user *)AA(ipck.msgp); msgtyp = ipck.msgtyp; } @@ -693,11 +696,11 @@ do_sys32_msgrcv (int first, int second, int msgtyp, int third, goto out; old_fs = get_fs (); set_fs (KERNEL_DS); - err = sys_msgrcv (first, p, second + 4, msgtyp, third); + err = sys_msgrcv (first, (struct msgbuf __user *)p, second + 4, msgtyp, third); set_fs (old_fs); if (err < 0) goto free_then_out; - up = (struct msgbuf32 *)uptr; + up = (struct msgbuf32 __user *)uptr; if (put_user (p->mtype, &up->mtype) || __copy_to_user (&up->mtext, p->mtext, err)) err = -EFAULT; @@ -708,19 +711,19 @@ out: } static int -do_sys32_msgctl (int first, int second, void *uptr) +do_sys32_msgctl (int first, int second, void __user *uptr) { int err = -EINVAL, err2; struct msqid64_ds m; - struct msqid_ds32 *up32 = (struct msqid_ds32 *)uptr; - struct msqid64_ds32 *up64 = (struct msqid64_ds32 *)uptr; + struct msqid_ds32 __user *up32 = (struct msqid_ds32 __user *)uptr; + struct msqid64_ds32 __user *up64 = (struct msqid64_ds32 __user *)uptr; mm_segment_t old_fs; switch (second & ~IPC_64) { case IPC_INFO: case IPC_RMID: case MSG_INFO: - err = sys_msgctl (first, second, (struct msqid_ds *)uptr); + err = sys_msgctl (first, second, (struct msqid_ds __user *)uptr); break; case IPC_SET: @@ -747,7 +750,7 @@ do_sys32_msgctl (int first, int second, void *uptr) break; old_fs = get_fs(); set_fs(KERNEL_DS); - err = sys_msgctl(first, second | IPC_64, (struct msqid_ds *)&m); + err = sys_msgctl(first, second | IPC_64, (struct msqid_ds __user *)&m); set_fs(old_fs); break; @@ -755,7 +758,7 @@ do_sys32_msgctl (int first, int second, void *uptr) case MSG_STAT: old_fs = get_fs(); set_fs(KERNEL_DS); - err = sys_msgctl(first, second | IPC_64, (struct msqid_ds *)&m); + err = sys_msgctl(first, second | IPC_64, (struct msqid_ds __user *)&m); set_fs(old_fs); if (second & IPC_64) { if (!access_ok(VERIFY_WRITE, up64, sizeof(*up64))) { @@ -809,10 +812,10 @@ do_sys32_msgctl (int first, int second, void *uptr) } static int -do_sys32_shmat (int first, int second, int third, int version, void *uptr) +do_sys32_shmat (int first, int second, int third, int version, void __user *uptr) { unsigned long raddr; - u32 *uaddr = (u32 *)A((u32)third); + u32 __user *uaddr = (u32 __user *)A((u32)third); int err = -EINVAL; if (version == 1) @@ -831,11 +834,11 @@ struct shm_info32 { }; static int -do_sys32_shmctl (int first, int second, void *uptr) +do_sys32_shmctl (int first, int second, void __user *uptr) { - struct shmid64_ds32 *up64 = (struct shmid64_ds32 *)uptr; - struct shmid_ds32 *up32 = (struct shmid_ds32 *)uptr; - struct shm_info32 *uip = (struct shm_info32 *)uptr; + struct shmid64_ds32 __user *up64 = (struct shmid64_ds32 __user *)uptr; + struct shmid_ds32 __user *up32 = (struct shmid_ds32 __user *)uptr; + struct shm_info32 __user *uip = (struct shm_info32 __user *)uptr; int err = -EFAULT, err2; struct shmid64_ds s64; mm_segment_t old_fs; @@ -848,7 +851,7 @@ do_sys32_shmctl (int first, int second, void *uptr) case IPC_RMID: case SHM_LOCK: case SHM_UNLOCK: - err = sys_shmctl(first, second, (struct shmid_ds *)uptr); + err = sys_shmctl(first, second, (struct shmid_ds __user *)uptr); break; case IPC_SET: if (second & IPC_64) { @@ -864,7 +867,7 @@ do_sys32_shmctl (int first, int second, void *uptr) break; old_fs = get_fs(); set_fs(KERNEL_DS); - err = sys_shmctl(first, second & ~IPC_64, &s); + err = sys_shmctl(first, second & ~IPC_64, (struct shmid_ds __user *)&s); set_fs(old_fs); break; @@ -872,7 +875,7 @@ do_sys32_shmctl (int first, int second, void *uptr) case SHM_STAT: old_fs = get_fs(); set_fs(KERNEL_DS); - err = sys_shmctl(first, second | IPC_64, (void *) &s64); + err = sys_shmctl(first, second | IPC_64, (void __user *) &s64); set_fs(old_fs); if (err < 0) break; @@ -922,7 +925,7 @@ do_sys32_shmctl (int first, int second, void *uptr) case SHM_INFO: old_fs = get_fs(); set_fs(KERNEL_DS); - err = sys_shmctl(first, second, (void *)&si); + err = sys_shmctl(first, second, (void __user *)&si); set_fs(old_fs); if (err < 0) break; @@ -944,11 +947,11 @@ do_sys32_shmctl (int first, int second, void *uptr) return err; } -static int sys32_semtimedop(int semid, struct sembuf *tsems, int nsems, - const struct compat_timespec *timeout32) +static int sys32_semtimedop(int semid, struct sembuf __user *tsems, int nsems, + const struct compat_timespec __user *timeout32) { struct compat_timespec t32; - struct timespec *t64 = compat_alloc_user_space(sizeof(*t64)); + struct timespec __user *t64 = compat_alloc_user_space(sizeof(*t64)); if (copy_from_user(&t32, timeout32, sizeof(t32))) return -EFAULT; @@ -971,11 +974,11 @@ sys32_ipc (u32 call, int first, int second, int third, u32 ptr, u32 fifth) switch (call) { case SEMOP: /* struct sembuf is the same on 32 and 64bit :)) */ - err = sys_semtimedop (first, (struct sembuf *)AA(ptr), second, + err = sys_semtimedop (first, (struct sembuf __user *)AA(ptr), second, NULL); break; case SEMTIMEDOP: - err = sys32_semtimedop (first, (struct sembuf *)AA(ptr), second, + err = sys32_semtimedop (first, (struct sembuf __user *)AA(ptr), second, (const struct compat_timespec __user *)AA(fifth)); break; case SEMGET: @@ -983,36 +986,36 @@ sys32_ipc (u32 call, int first, int second, int third, u32 ptr, u32 fifth) break; case SEMCTL: err = do_sys32_semctl (first, second, third, - (void *)AA(ptr)); + (void __user *)AA(ptr)); break; case MSGSND: err = do_sys32_msgsnd (first, second, third, - (void *)AA(ptr)); + (void __user *)AA(ptr)); break; case MSGRCV: err = do_sys32_msgrcv (first, second, fifth, third, - version, (void *)AA(ptr)); + version, (void __user *)AA(ptr)); break; case MSGGET: err = sys_msgget ((key_t) first, second); break; case MSGCTL: - err = do_sys32_msgctl (first, second, (void *)AA(ptr)); + err = do_sys32_msgctl (first, second, (void __user *)AA(ptr)); break; case SHMAT: err = do_sys32_shmat (first, second, third, - version, (void *)AA(ptr)); + version, (void __user *)AA(ptr)); break; case SHMDT: - err = sys_shmdt ((char *)A(ptr)); + err = sys_shmdt ((char __user *)A(ptr)); break; case SHMGET: err = sys_shmget (first, (unsigned)second, third); break; case SHMCTL: - err = do_sys32_shmctl (first, second, (void *)AA(ptr)); + err = do_sys32_shmctl (first, second, (void __user *)AA(ptr)); break; default: err = -EINVAL; @@ -1023,7 +1026,7 @@ sys32_ipc (u32 call, int first, int second, int third, u32 ptr, u32 fifth) } asmlinkage long sys32_shmat(int shmid, char __user *shmaddr, - int shmflg, int32_t *addr) + int shmflg, int32_t __user *addr) { unsigned long raddr; int err; @@ -1048,12 +1051,13 @@ struct sysctl_args32 #ifdef CONFIG_SYSCTL -asmlinkage long sys32_sysctl(struct sysctl_args32 *args) +asmlinkage long sys32_sysctl(struct sysctl_args32 __user *args) { struct sysctl_args32 tmp; int error; - size_t oldlen, *oldlenp = NULL; - unsigned long addr = (((long)&args->__unused[0]) + 7) & ~7; + size_t oldlen; + size_t __user *oldlenp = NULL; + unsigned long addr = (((unsigned long)&args->__unused[0]) + 7) & ~7; if (copy_from_user(&tmp, args, sizeof(tmp))) return -EFAULT; @@ -1065,20 +1069,20 @@ asmlinkage long sys32_sysctl(struct sysctl_args32 *args) basically copy the whole sysctl.c here, and glibc's __sysctl uses rw memory for the structure anyway. */ - if (get_user(oldlen, (u32 *)A(tmp.oldlenp)) || - put_user(oldlen, (size_t *)addr)) + if (get_user(oldlen, (u32 __user *)A(tmp.oldlenp)) || + put_user(oldlen, (size_t __user *)addr)) return -EFAULT; - oldlenp = (size_t *)addr; + oldlenp = (size_t __user *)addr; } lock_kernel(); - error = do_sysctl((int *)A(tmp.name), tmp.nlen, (void *)A(tmp.oldval), - oldlenp, (void *)A(tmp.newval), tmp.newlen); + error = do_sysctl((int __user *)A(tmp.name), tmp.nlen, (void __user *)A(tmp.oldval), + oldlenp, (void __user *)A(tmp.newval), tmp.newlen); unlock_kernel(); if (oldlenp) { if (!error) { - if (get_user(oldlen, (size_t *)addr) || - put_user(oldlen, (u32 *)A(tmp.oldlenp))) + if (get_user(oldlen, (size_t __user *)addr) || + put_user(oldlen, (u32 __user *)A(tmp.oldlenp))) error = -EFAULT; } copy_to_user(args->__unused, tmp.__unused, sizeof(tmp.__unused)); @@ -1088,7 +1092,7 @@ asmlinkage long sys32_sysctl(struct sysctl_args32 *args) #endif /* CONFIG_SYSCTL */ -asmlinkage long sys32_newuname(struct new_utsname * name) +asmlinkage long sys32_newuname(struct new_utsname __user * name) { int ret = 0; @@ -1123,9 +1127,9 @@ struct ustat32 { char f_fpack[6]; }; -extern asmlinkage long sys_ustat(dev_t dev, struct ustat * ubuf); +extern asmlinkage long sys_ustat(dev_t dev, struct ustat __user * ubuf); -asmlinkage int sys32_ustat(dev_t dev, struct ustat32 * ubuf32) +asmlinkage int sys32_ustat(dev_t dev, struct ustat32 __user * ubuf32) { int err; struct ustat tmp; @@ -1133,7 +1137,7 @@ asmlinkage int sys32_ustat(dev_t dev, struct ustat32 * ubuf32) mm_segment_t old_fs = get_fs(); set_fs(KERNEL_DS); - err = sys_ustat(dev, &tmp); + err = sys_ustat(dev, (struct ustat __user *)&tmp); set_fs (old_fs); if (err) @@ -1166,7 +1170,7 @@ struct timex32 { extern int do_adjtimex(struct timex *); -asmlinkage int sys32_adjtimex(struct timex32 *utp) +asmlinkage int sys32_adjtimex(struct timex32 __user *utp) { struct timex txc; int ret; @@ -1222,7 +1226,7 @@ asmlinkage int sys32_adjtimex(struct timex32 *utp) return ret; } -asmlinkage int sys32_sendfile(int out_fd, int in_fd, compat_off_t *offset, +asmlinkage int sys32_sendfile(int out_fd, int in_fd, compat_off_t __user *offset, s32 count) { mm_segment_t old_fs = get_fs(); @@ -1233,7 +1237,7 @@ asmlinkage int sys32_sendfile(int out_fd, int in_fd, compat_off_t *offset, return -EFAULT; set_fs(KERNEL_DS); - ret = sys_sendfile(out_fd, in_fd, offset ? &of : NULL, count); + ret = sys_sendfile(out_fd, in_fd, offset ? (off_t __user *)&of : NULL, count); set_fs(old_fs); if (offset && put_user(of, offset)) @@ -1263,7 +1267,7 @@ static unsigned char socketcall_nargs[18]={AL(0),AL(3),AL(3),AL(3),AL(2),AL(3), * it is set by the callees. */ -asmlinkage long sys32_socketcall(int call, unsigned int *args32) +asmlinkage long sys32_socketcall(int call, unsigned int __user *args32) { unsigned int a[6]; unsigned int a0,a1; @@ -1285,7 +1289,7 @@ asmlinkage long sys32_socketcall(int call, unsigned int *args32) struct sockaddr __user *addr, int __user *addr_len); extern asmlinkage long sys_shutdown(int fd, int how); extern asmlinkage long sys_setsockopt(int fd, int level, int optname, char __user *optval, int optlen); - extern asmlinkage long sys_getsockopt(int fd, int level, int optname, char __user *optval, int *optlen); + extern asmlinkage long sys_getsockopt(int fd, int level, int optname, char __user *optval, int __user *optlen); extern asmlinkage long sys_sendmsg(int fd, struct msghdr __user *msg, unsigned flags); extern asmlinkage long sys_recvmsg(int fd, struct msghdr __user *msg, unsigned int flags); @@ -1405,7 +1409,7 @@ _sys32_clone(nabi_no_regargs struct pt_regs regs) newsp = regs.regs[5]; if (!newsp) newsp = regs.regs[29]; - parent_tidptr = (int *) regs.regs[6]; + parent_tidptr = (int __user *) regs.regs[6]; /* Use __dummy4 instead of getting it off the stack, so that syscall() works. */ diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c index 1da2eeb3ef9..55f2bc09529 100644 --- a/arch/mips/kernel/syscall.c +++ b/arch/mips/kernel/syscall.c @@ -345,7 +345,7 @@ asmlinkage int sys_ipc (uint call, int first, int second, union semun fourth; if (!ptr) return -EINVAL; - if (get_user(fourth.__pad, (void *__user *) ptr)) + if (get_user(fourth.__pad, (void __user *__user *) ptr)) return -EFAULT; return sys_semctl (first, second, third, fourth); } -- cgit v1.2.3-18-g5258 From 8145095cd8fd466980ea6401f26a52e462275222 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 22 Feb 2006 23:06:55 +0000 Subject: [MIPS] Remove CONFIG_BUILD_ELF64. This option is no longer usable with supported compilers. It will be replaced by usage of -msym32 in a separate patch. Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 27 +++++++++------------------ arch/mips/configs/bigsur_defconfig | 1 - arch/mips/configs/ip27_defconfig | 1 - arch/mips/configs/ip32_defconfig | 1 - arch/mips/configs/ocelot_c_defconfig | 1 - arch/mips/configs/ocelot_g_defconfig | 1 - arch/mips/configs/sb1250-swarm_defconfig | 1 - arch/mips/kernel/setup.c | 11 ----------- arch/mips/mm/tlbex.c | 13 ------------- 9 files changed, 9 insertions(+), 48 deletions(-) (limited to 'arch') diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 3d8dac681c6..c626dd5942f 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -70,18 +70,20 @@ CHECKFLAGS-$(CONFIG_CPU_LITTLE_ENDIAN) += -D__MIPSEL__ CHECKFLAGS = $(CHECKFLAGS-y) -ifdef CONFIG_BUILD_ELF64 -gas-abi = 64 -ld-emul = $(64bit-emul) -vmlinux-32 = vmlinux.32 -vmlinux-64 = vmlinux -else +ifdef CONFIG_32BIT gas-abi = 32 ld-emul = $(32bit-emul) vmlinux-32 = vmlinux vmlinux-64 = vmlinux.64 +endif -cflags-$(CONFIG_64BIT) += $(call cc-option,-mno-explicit-relocs) +ifdef CONFIG_64BIT +gas-abi = 64 +ld-emul = $(64bit-emul) +vmlinux-32 = vmlinux.32 +vmlinux-64 = vmlinux + +cflags-y += $(call cc-option,-mno-explicit-relocs) endif # @@ -630,7 +632,6 @@ endif ifdef CONFIG_SGI_IP27 core-$(CONFIG_SGI_IP27) += arch/mips/sgi-ip27/ cflags-$(CONFIG_SGI_IP27) += -Iinclude/asm-mips/mach-ip27 -ifdef CONFIG_BUILD_ELF64 ifdef CONFIG_MAPPED_KERNEL load-$(CONFIG_SGI_IP27) += 0xc00000004001c000 OBJCOPYFLAGS := --change-addresses=0x3fffffff80000000 @@ -639,16 +640,6 @@ else load-$(CONFIG_SGI_IP27) += 0xa80000000001c000 OBJCOPYFLAGS := --change-addresses=0x57ffffff80000000 endif -else -ifdef CONFIG_MAPPED_KERNEL -load-$(CONFIG_SGI_IP27) += 0xffffffffc001c000 -OBJCOPYFLAGS := --change-addresses=0xc000000080000000 -dataoffset-$(CONFIG_SGI_IP27) += 0x01000000 -else -load-$(CONFIG_SGI_IP27) += 0xffffffff8001c000 -OBJCOPYFLAGS := --change-addresses=0xa800000080000000 -endif -endif endif # diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig index 6fd35377981..e39f1da6297 100644 --- a/arch/mips/configs/bigsur_defconfig +++ b/arch/mips/configs/bigsur_defconfig @@ -247,7 +247,6 @@ CONFIG_MMU=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set -CONFIG_BUILD_ELF64=y CONFIG_MIPS32_COMPAT=y CONFIG_COMPAT=y CONFIG_MIPS32_O32=y diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index 58c22cd344d..009ec9d9773 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -234,7 +234,6 @@ CONFIG_MMU=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set -CONFIG_BUILD_ELF64=y CONFIG_MIPS32_COMPAT=y CONFIG_COMPAT=y CONFIG_MIPS32_O32=y diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig index a34db6e82b2..54afa2556f5 100644 --- a/arch/mips/configs/ip32_defconfig +++ b/arch/mips/configs/ip32_defconfig @@ -224,7 +224,6 @@ CONFIG_MMU=y # CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y -# CONFIG_BUILD_ELF64 is not set CONFIG_MIPS32_COMPAT=y CONFIG_COMPAT=y CONFIG_MIPS32_O32=y diff --git a/arch/mips/configs/ocelot_c_defconfig b/arch/mips/configs/ocelot_c_defconfig index e8d6bb3551a..a8fc4c6c10c 100644 --- a/arch/mips/configs/ocelot_c_defconfig +++ b/arch/mips/configs/ocelot_c_defconfig @@ -220,7 +220,6 @@ CONFIG_MMU=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set -# CONFIG_BUILD_ELF64 is not set CONFIG_MIPS32_COMPAT=y CONFIG_COMPAT=y CONFIG_MIPS32_O32=y diff --git a/arch/mips/configs/ocelot_g_defconfig b/arch/mips/configs/ocelot_g_defconfig index b6126ad4d06..dab6c896fbb 100644 --- a/arch/mips/configs/ocelot_g_defconfig +++ b/arch/mips/configs/ocelot_g_defconfig @@ -223,7 +223,6 @@ CONFIG_MMU=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set -# CONFIG_BUILD_ELF64 is not set CONFIG_MIPS32_COMPAT=y CONFIG_COMPAT=y CONFIG_MIPS32_O32=y diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig index 52048c90607..6481fb2426f 100644 --- a/arch/mips/configs/sb1250-swarm_defconfig +++ b/arch/mips/configs/sb1250-swarm_defconfig @@ -247,7 +247,6 @@ CONFIG_MMU=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set -# CONFIG_BUILD_ELF64 is not set CONFIG_MIPS32_COMPAT=y CONFIG_COMPAT=y CONFIG_MIPS32_O32=y diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index d9293c558e4..0cb3b6097e0 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -447,21 +447,10 @@ static inline void resource_init(void) { int i; -#if defined(CONFIG_64BIT) && !defined(CONFIG_BUILD_ELF64) - /* - * The 64bit code in 32bit object format trick can't represent - * 64bit wide relocations for linker script symbols. - */ - code_resource.start = CPHYSADDR(&_text); - code_resource.end = CPHYSADDR(&_etext) - 1; - data_resource.start = CPHYSADDR(&_etext); - data_resource.end = CPHYSADDR(&_edata) - 1; -#else code_resource.start = virt_to_phys(&_text); code_resource.end = virt_to_phys(&_etext) - 1; data_resource.start = virt_to_phys(&_etext); data_resource.end = virt_to_phys(&_edata) - 1; -#endif /* * Request address space for all standard RAM. diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index ac4f4bfaae5..599b3c29718 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -951,7 +951,6 @@ build_get_pmde64(u32 **p, struct label **l, struct reloc **r, /* No i_nop needed here, since the next insn doesn't touch TMP. */ #ifdef CONFIG_SMP -# ifdef CONFIG_BUILD_ELF64 /* * 64 bit SMP running in XKPHYS has smp_processor_id() << 3 * stored in CONTEXT. @@ -962,18 +961,6 @@ build_get_pmde64(u32 **p, struct label **l, struct reloc **r, i_daddu(p, ptr, ptr, tmp); i_dmfc0(p, tmp, C0_BADVADDR); i_ld(p, ptr, rel_lo(pgdc), ptr); -# else - /* - * 64 bit SMP running in compat space has the lower part of - * &pgd_current[smp_processor_id()] stored in CONTEXT. - */ - if (!in_compat_space_p(pgdc)) - panic("Invalid page directory address!"); - - i_dmfc0(p, ptr, C0_CONTEXT); - i_dsra(p, ptr, ptr, 23); - i_ld(p, ptr, 0, ptr); -# endif #else i_LA_mostly(p, ptr, pgdc); i_ld(p, ptr, rel_lo(pgdc), ptr); -- cgit v1.2.3-18-g5258 From a206f6a7aa78cfaad1d4519e87d9a54fa2b5cfa6 Mon Sep 17 00:00:00 2001 From: Martin Michlmayr Date: Wed, 1 Mar 2006 01:55:05 +0000 Subject: [MIPS] Mention Broadcom part number for BigSur board Mention the Broadcom part number for the BigSur board (BCM91480B) in Kconfig, just like it's done for other Broadcom boards. Signed-off-by: Martin Michlmayr Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 6356f7d52ce..97a9769a904 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -602,7 +602,7 @@ config SGI_IP32 If you want this kernel to run on SGI O2 workstation, say Y here. config SIBYTE_BIGSUR - bool "Support for Sibyte BigSur" + bool "Support for Sibyte BCM91480B-BigSur" select BOOT_ELF32 select DMA_COHERENT select PCI_DOMAINS -- cgit v1.2.3-18-g5258 From 59b3e8e9aac69d2d02853acac7e2affdfbabca50 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 8 Mar 2006 11:35:00 +0000 Subject: [MIPS] Makefile crapectomy. Dump all the ridiculously complicated stuff that was needed support compilers older and newer than 3.0. Signed-off-by: Ralf Baechle Signed-off-by: Thiemo Seufer --- arch/mips/Makefile | 208 ++++++++++------------------------------------------- 1 file changed, 39 insertions(+), 169 deletions(-) (limited to 'arch') diff --git a/arch/mips/Makefile b/arch/mips/Makefile index c626dd5942f..9a69e0f0ab7 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -12,10 +12,6 @@ # for "archclean" cleaning up for this architecture. # -as-option = $(shell if $(CC) $(CFLAGS) $(1) -Wa,-Z -c -o /dev/null \ - -xassembler /dev/null > /dev/null 2>&1; then echo "$(1)"; \ - else echo "$(2)"; fi ;) - cflags-y := # @@ -38,12 +34,10 @@ else endif ifdef CONFIG_32BIT -gcc-abi = 32 tool-prefix = $(32bit-tool-prefix) UTS_MACHINE := mips endif ifdef CONFIG_64BIT -gcc-abi = 64 tool-prefix = $(64bit-tool-prefix) UTS_MACHINE := mips64 endif @@ -52,40 +46,28 @@ ifdef CONFIG_CROSSCOMPILE CROSS_COMPILE := $(tool-prefix) endif -CHECKFLAGS-y += -D__linux__ -D__mips__ \ - -D_MIPS_SZINT=32 \ - -D_ABIO32=1 \ - -D_ABIN32=2 \ - -D_ABI64=3 -CHECKFLAGS-$(CONFIG_32BIT) += -D_MIPS_SIM=_ABIO32 \ - -D_MIPS_SZLONG=32 \ - -D_MIPS_SZPTR=32 \ - -D__PTRDIFF_TYPE__=int -CHECKFLAGS-$(CONFIG_64BIT) += -m64 -D_MIPS_SIM=_ABI64 \ - -D_MIPS_SZLONG=64 \ - -D_MIPS_SZPTR=64 \ - -D__PTRDIFF_TYPE__="long int" -CHECKFLAGS-$(CONFIG_CPU_BIG_ENDIAN) += -D__MIPSEB__ -CHECKFLAGS-$(CONFIG_CPU_LITTLE_ENDIAN) += -D__MIPSEL__ - -CHECKFLAGS = $(CHECKFLAGS-y) - ifdef CONFIG_32BIT -gas-abi = 32 ld-emul = $(32bit-emul) vmlinux-32 = vmlinux vmlinux-64 = vmlinux.64 + +cflags-y += -mabi=32 endif ifdef CONFIG_64BIT -gas-abi = 64 ld-emul = $(64bit-emul) vmlinux-32 = vmlinux.32 vmlinux-64 = vmlinux +cflags-y += -mabi=64 +ifdef CONFIG_BUILD_ELF64 cflags-y += $(call cc-option,-mno-explicit-relocs) +else +cflags-y += $(call cc-option,-msym32) +endif endif + # # GCC uses -G 0 -mabicalls -fpic as default. We don't want PIC in the kernel # code since it only slows down the whole thing. At some point we might make @@ -107,162 +89,44 @@ MODFLAGS += -mlong-calls # carefully avoid to add it redundantly because gcc 3.3/3.4 complains # when fed the toolchain default! # -cflags-$(CONFIG_CPU_BIG_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' && echo -EB) -cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL) +cflags-$(CONFIG_CPU_BIG_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' && echo -EB -D__MIPSEB__) +cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL -D__MIPSEL__) cflags-$(CONFIG_SB1XXX_CORELIS) += $(call cc-option,-mno-sched-prolog) \ -fno-omit-frame-pointer -# -# Use: $(call set_gccflags,,,,,) -# -# , -- preferred CPU and ISA designations (may require -# recent tools) -# , -- fallback CPU and ISA designations (have to work -# with up to the oldest supported tools) -# -- an ISA designation used as an ABI selector for -# gcc versions that do not support "-mabi=32" -# (depending on the CPU type, either "mips1" or -# "mips2") -# -set_gccflags = $(shell \ -while :; do \ - cpu=$(1); isa=-$(2); \ - for gcc_opt in -march= -mcpu=; do \ - $(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \ - -xc /dev/null > /dev/null 2>&1 && \ - break 2; \ - done; \ - cpu=$(3); isa=-$(4); \ - for gcc_opt in -march= -mcpu=; do \ - $(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \ - -xc /dev/null > /dev/null 2>&1 && \ - break 2; \ - done; \ - break; \ -done; \ -gcc_abi=-mabi=$(gcc-abi); gcc_cpu=$$cpu; \ -if $(CC) $$gcc_abi -S -o /dev/null -xc /dev/null > /dev/null 2>&1; then \ - gcc_isa=$$isa; \ -else \ - gcc_abi=; gcc_isa=-$(5); \ -fi; \ -gas_abi=-Wa,-$(gcc-abi); gas_cpu=$$cpu; gas_isa=-Wa,$$isa; \ -while :; do \ - for gas_opt in -Wa,-march= -Wa,-mcpu=; do \ - $(CC) $$gas_abi $$gas_opt$$cpu $$gas_isa -Wa,-Z -c \ - -o /dev/null -xassembler /dev/null > /dev/null 2>&1 && \ - break 2; \ - done; \ - gas_abi=; gas_opt=; gas_cpu=; gas_isa=; \ - break; \ -done; \ -if test "$(gcc-abi)" != "$(gas-abi)"; then \ - gas_abi="-Wa,-$(gas-abi) -Wa,-mgp$(gcc-abi)"; \ -fi; \ -if test "$$gcc_opt" = -march= && test -n "$$gcc_abi"; then \ - $(CC) $$gcc_abi $$gcc_opt$$gcc_cpu -S -o /dev/null \ - -xc /dev/null > /dev/null 2>&1 && \ - gcc_isa=; \ -fi; \ -echo $$gcc_abi $$gcc_opt$$gcc_cpu $$gcc_isa $$gas_abi $$gas_opt$$gas_cpu $$gas_isa) - # # CPU-dependent compiler/assembler options for optimization. # -cflags-$(CONFIG_CPU_R3000) += \ - $(call set_gccflags,r3000,mips1,r3000,mips1,mips1) -CHECKFLAGS-$(CONFIG_CPU_R3000) += -D_MIPS_ISA=_MIPS_ISA_MIPS1 - -cflags-$(CONFIG_CPU_TX39XX) += \ - $(call set_gccflags,r3900,mips1,r3000,mips1,mips1) -CHECKFLAGS-$(CONFIG_CPU_TX39XX) += -D_MIPS_ISA=_MIPS_ISA_MIPS1 - -cflags-$(CONFIG_CPU_R6000) += \ - $(call set_gccflags,r6000,mips2,r6000,mips2,mips2) \ - -Wa,--trap -CHECKFLAGS-$(CONFIG_CPU_R6000) += -D_MIPS_ISA=_MIPS_ISA_MIPS2 - -cflags-$(CONFIG_CPU_R4300) += \ - $(call set_gccflags,r4300,mips3,r4300,mips3,mips2) \ - -Wa,--trap -CHECKFLAGS-$(CONFIG_CPU_R4300) += -D_MIPS_ISA=_MIPS_ISA_MIPS3 - -cflags-$(CONFIG_CPU_VR41XX) += \ - $(call set_gccflags,r4100,mips3,r4600,mips3,mips2) \ - -Wa,--trap -CHECKFLAGS-$(CONFIG_CPU_VR41XX) += -D_MIPS_ISA=_MIPS_ISA_MIPS3 - -cflags-$(CONFIG_CPU_R4X00) += \ - $(call set_gccflags,r4600,mips3,r4600,mips3,mips2) \ - -Wa,--trap -CHECKFLAGS-$(CONFIG_CPU_R4X00) += -D_MIPS_ISA=_MIPS_ISA_MIPS3 - -cflags-$(CONFIG_CPU_TX49XX) += \ - $(call set_gccflags,r4600,mips3,r4600,mips3,mips2) \ - -Wa,--trap -CHECKFLAGS-$(CONFIG_CPU_TX49XX) += -D_MIPS_ISA=_MIPS_ISA_MIPS3 - -cflags-$(CONFIG_CPU_MIPS32_R1) += \ - $(call set_gccflags,mips32,mips32,r4600,mips3,mips2) \ +cflags-$(CONFIG_CPU_R3000) += -march=r3000 +cflags-$(CONFIG_CPU_TX39XX) += -march=r3900 +cflags-$(CONFIG_CPU_R6000) += -march=r6000 -Wa,--trap +cflags-$(CONFIG_CPU_R4300) += -march=r4300 -Wa,--trap +cflags-$(CONFIG_CPU_VR41XX) += -march=r4100 -Wa,--trap +cflags-$(CONFIG_CPU_R4X00) += -march=r4600 -Wa,--trap +cflags-$(CONFIG_CPU_TX49XX) += -march=r4600 -Wa,--trap +cflags-$(CONFIG_CPU_MIPS32_R1) += $(call cc-option,-march=mips32,-mips2 -mtune=r4600) \ + -Wa,-mips32 -Wa,--trap +cflags-$(CONFIG_CPU_MIPS32_R2) += $(call cc-option,-march=mips32r2,-mips2 -mtune=r4600) \ + -Wa,-mips32r2 -Wa,--trap +cflags-$(CONFIG_CPU_MIPS64_R1) += $(call cc-option,-march=mips64,-mips2 -mtune=r4600) \ + -Wa,-mips64 -Wa,--trap +cflags-$(CONFIG_CPU_MIPS64_R2) += $(call cc-option,-march=mips64r2,-mips2 -mtune=r4600 ) \ + -Wa,-mips64r2 -Wa,--trap +cflags-$(CONFIG_CPU_R5000) += -march=r5000 -Wa,--trap +cflags-$(CONFIG_CPU_R5432) += $(call cc-options,-march=r5400,-march=r5000) \ -Wa,--trap -CHECKFLAGS-$(CONFIG_CPU_MIPS32_R1) += -D_MIPS_ISA=_MIPS_ISA_MIPS32 - -cflags-$(CONFIG_CPU_MIPS32_R2) += \ - $(call set_gccflags,mips32r2,mips32r2,r4600,mips3,mips2) \ - -Wa,--trap -CHECKFLAGS-$(CONFIG_CPU_MIPS32_R2) += -D_MIPS_ISA=_MIPS_ISA_MIPS32 - -cflags-$(CONFIG_CPU_MIPS64_R1) += \ - $(call set_gccflags,mips64,mips64,r4600,mips3,mips2) \ - -Wa,--trap -CHECKFLAGS-$(CONFIG_CPU_MIPS64_R1) += -D_MIPS_ISA=_MIPS_ISA_MIPS64 - -cflags-$(CONFIG_CPU_MIPS64_R2) += \ - $(call set_gccflags,mips64r2,mips64r2,r4600,mips3,mips2) \ - -Wa,--trap -CHECKFLAGS-$(CONFIG_CPU_MIPS64_R2) += -D_MIPS_ISA=_MIPS_ISA_MIPS64 - -cflags-$(CONFIG_CPU_R5000) += \ - $(call set_gccflags,r5000,mips4,r5000,mips4,mips2) \ - -Wa,--trap -CHECKFLAGS-$(CONFIG_CPU_R5000) += -D_MIPS_ISA=_MIPS_ISA_MIPS4 - -cflags-$(CONFIG_CPU_R5432) += \ - $(call set_gccflags,r5400,mips4,r5000,mips4,mips2) \ - -Wa,--trap -CHECKFLAGS-$(CONFIG_CPU_R5432) += -D_MIPS_ISA=_MIPS_ISA_MIPS4 - -cflags-$(CONFIG_CPU_NEVADA) += \ - $(call set_gccflags,rm5200,mips4,r5000,mips4,mips2) \ +cflags-$(CONFIG_CPU_NEVADA) += $(call cc-options,-march=rm5200,-march=r5000) \ -Wa,--trap -CHECKFLAGS-$(CONFIG_CPU_NEVADA) += -D_MIPS_ISA=_MIPS_ISA_MIPS4 - -cflags-$(CONFIG_CPU_RM7000) += \ - $(call set_gccflags,rm7000,mips4,r5000,mips4,mips2) \ +cflags-$(CONFIG_CPU_RM7000) += $(call cc-option,-march=rm7000,-march=r5000) \ -Wa,--trap -CHECKFLAGS-$(CONFIG_CPU_RM7000) += -D_MIPS_ISA=_MIPS_ISA_MIPS4 - -cflags-$(CONFIG_CPU_RM9000) += \ - $(call set_gccflags,rm9000,mips4,r5000,mips4,mips2) \ - -Wa,--trap -CHECKFLAGS-$(CONFIG_CPU_RM9000) += -D_MIPS_ISA=_MIPS_ISA_MIPS4 - - -cflags-$(CONFIG_CPU_SB1) += \ - $(call set_gccflags,sb1,mips64,r5000,mips4,mips2) \ +cflags-$(CONFIG_CPU_RM9000) += $(call cc-option,-march=rm9000,-march=r5000) \ -Wa,--trap -CHECKFLAGS-$(CONFIG_CPU_SB1) += -D_MIPS_ISA=_MIPS_ISA_MIPS64 - -cflags-$(CONFIG_CPU_R8000) += \ - $(call set_gccflags,r8000,mips4,r8000,mips4,mips2) \ +cflags-$(CONFIG_CPU_SB1) += $(call cc-option,-march=sb1,-march=r5000) \ -Wa,--trap -CHECKFLAGS-$(CONFIG_CPU_R8000) += -D_MIPS_ISA=_MIPS_ISA_MIPS4 - -cflags-$(CONFIG_CPU_R10000) += \ - $(call set_gccflags,r10000,mips4,r8000,mips4,mips2) \ +cflags-$(CONFIG_CPU_R8000) += -march=r8000 -Wa,--trap +cflags-$(CONFIG_CPU_R10000) += $(call cc-option,-march=r10000,-march=r8000) \ -Wa,--trap -CHECKFLAGS-$(CONFIG_CPU_R10000) += -D_MIPS_ISA=_MIPS_ISA_MIPS4 ifdef CONFIG_CPU_SB1 ifdef CONFIG_SB1_PASS_1_WORKAROUNDS @@ -748,6 +612,12 @@ CFLAGS += $(cflags-y) LDFLAGS += -m $(ld-emul) +ifdef CONFIG_MIPS +CHECKFLAGS += $(shell $(CC) $(CFLAGS) -dM -E -xc /dev/null | \ + egrep -vw '__GNUC_(MAJOR|MINOR|PATCHLEVEL)__' | \ + sed -e 's/^\#define /-D/' -e 's/ /="/' -e 's/$$/"/') +endif + OBJCOPYFLAGS += --remove-section=.reginfo # -- cgit v1.2.3-18-g5258 From a3dddd560ee936495466d85ecc97490d171e8d31 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 11 Mar 2006 08:18:41 +0000 Subject: [MIPS] War on whitespace: cleanup initial spaces followed by tabs. Signed-off-by: Ralf Baechle --- arch/mips/au1000/common/dbdma.c | 4 ++-- arch/mips/au1000/common/dma.c | 2 +- arch/mips/au1000/common/platform.c | 4 ++-- arch/mips/au1000/common/setup.c | 2 +- arch/mips/au1000/common/time.c | 2 +- arch/mips/dec/prom/memory.c | 2 +- arch/mips/jazz/int-handler.S | 12 ++++++------ arch/mips/kernel/cpu-probe.c | 6 +++--- arch/mips/kernel/gdb-low.S | 2 +- arch/mips/kernel/signal-common.h | 10 +++++----- arch/mips/kernel/signal32.c | 10 +++++----- arch/mips/kernel/traps.c | 2 +- arch/mips/lasat/image/romscript.normal | 5 +++-- arch/mips/mips-boards/generic/mipsIRQ.S | 2 +- arch/mips/mips-boards/sim/sim_IRQ.c | 2 +- arch/mips/mips-boards/sim/sim_irq.S | 2 +- arch/mips/mips-boards/sim/sim_smp.c | 2 +- arch/mips/mm/c-r3k.c | 18 +++++++++--------- arch/mips/momentum/jaguar_atx/reset.c | 2 +- arch/mips/momentum/jaguar_atx/setup.c | 2 +- arch/mips/momentum/ocelot_3/reset.c | 2 +- arch/mips/momentum/ocelot_c/reset.c | 2 +- arch/mips/pci/fixup-vr4133.c | 2 +- arch/mips/pci/ops-ddb5477.c | 4 ++-- arch/mips/pci/ops-tx4938.c | 16 ++++++++-------- arch/mips/pci/pci-bcm1480.c | 2 +- arch/mips/pci/pci-bcm1480ht.c | 2 +- arch/mips/pci/pci-ip27.c | 12 ++++++------ arch/mips/philips/pnx8550/common/int.c | 2 +- arch/mips/sgi-ip27/ip27-memory.c | 4 ++-- arch/mips/sgi-ip32/ip32-setup.c | 2 +- .../tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c | 4 ++-- arch/mips/tx4938/toshiba_rbtx4938/setup.c | 2 +- arch/mips/vr41xx/common/bcu.c | 6 +++--- 34 files changed, 78 insertions(+), 77 deletions(-) (limited to 'arch') diff --git a/arch/mips/au1000/common/dbdma.c b/arch/mips/au1000/common/dbdma.c index d00e8247d6c..6ee090bd86c 100644 --- a/arch/mips/au1000/common/dbdma.c +++ b/arch/mips/au1000/common/dbdma.c @@ -214,7 +214,7 @@ au1xxx_ddma_add_device(dbdev_tab_t *dev) if ( NULL != p ) { memcpy(p, dev, sizeof(dbdev_tab_t)); - p->dev_id = DSCR_DEV2CUSTOM_ID(new_id,dev->dev_id); + p->dev_id = DSCR_DEV2CUSTOM_ID(new_id,dev->dev_id); ret = p->dev_id; new_id++; #if 0 @@ -260,7 +260,7 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags); if (!(stp->dev_flags & DEV_FLAGS_INUSE) || (stp->dev_flags & DEV_FLAGS_ANYUSE)) { - /* Got source */ + /* Got source */ stp->dev_flags |= DEV_FLAGS_INUSE; if (!(dtp->dev_flags & DEV_FLAGS_INUSE) || (dtp->dev_flags & DEV_FLAGS_ANYUSE)) { diff --git a/arch/mips/au1000/common/dma.c b/arch/mips/au1000/common/dma.c index 1905c6b104f..1d82f227751 100644 --- a/arch/mips/au1000/common/dma.c +++ b/arch/mips/au1000/common/dma.c @@ -174,7 +174,7 @@ int request_au1000_dma(int dev_id, const char *dev_str, return -EINVAL; #else if (dev_id < 0 || dev_id >= DMA_NUM_DEV) - return -EINVAL; + return -EINVAL; #endif for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++) { diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c index 48d3f54f88f..d7a8f0a811f 100644 --- a/arch/mips/au1000/common/platform.c +++ b/arch/mips/au1000/common/platform.c @@ -264,7 +264,7 @@ static struct resource smc91x_resources[] = { static struct platform_device smc91x_device = { .name = "smc91x", - .id = -1, + .id = -1, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, }; @@ -288,7 +288,7 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = { &au1xxx_mmc_device, #endif #ifdef CONFIG_MIPS_DB1200 - &smc91x_device, + &smc91x_device, #endif }; diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c index eb155c071aa..1080558c810 100644 --- a/arch/mips/au1000/common/setup.c +++ b/arch/mips/au1000/common/setup.c @@ -90,7 +90,7 @@ void __init plat_setup(void) else { /* Clear to obtain best system bus performance */ clear_c0_config(1<<19); /* Clear Config[OD] */ - } + } argptr = prom_getcmdline(); diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c index 883d3f3d8c5..f85f1524b36 100644 --- a/arch/mips/au1000/common/time.c +++ b/arch/mips/au1000/common/time.c @@ -359,7 +359,7 @@ static unsigned long do_fast_cp0_gettimeoffset(void) : "hi", "lo", GCC_REG_ACCUM); /* - * Due to possible jiffies inconsistencies, we need to check + * Due to possible jiffies inconsistencies, we need to check * the result so that we'll get a timer that is monotonic. */ if (res >= USECS_PER_JIFFY) diff --git a/arch/mips/dec/prom/memory.c b/arch/mips/dec/prom/memory.c index 83d4556c3cb..81cb5a76cfb 100644 --- a/arch/mips/dec/prom/memory.c +++ b/arch/mips/dec/prom/memory.c @@ -45,7 +45,7 @@ static inline void pmax_setup_memory_region(void) */ for (memory_page = (unsigned char *)CKSEG1 + CHUNK_SIZE; mem_err == 0 && memory_page < (unsigned char *)CKSEG1 + 0x1e00000; - memory_page += CHUNK_SIZE) { + memory_page += CHUNK_SIZE) { dummy = *memory_page; } memcpy((void *)(CKSEG0 + 0x80), &old_handler, 0x80); diff --git a/arch/mips/jazz/int-handler.S b/arch/mips/jazz/int-handler.S index 4dbcf91db88..dc752c67b52 100644 --- a/arch/mips/jazz/int-handler.S +++ b/arch/mips/jazz/int-handler.S @@ -248,17 +248,17 @@ loc_call: /* and t2,s1 sh t2,JAZZ_IO_IRQ_ENABLE - nor s1,zero,s1 + nor s1,zero,s1 jal do_IRQ - /* - * Reenable interrupt - */ + /* + * Reenable interrupt + */ lhu t2,JAZZ_IO_IRQ_ENABLE - or t2,s1 + or t2,s1 sh t2,JAZZ_IO_IRQ_ENABLE - j ret_from_irq + j ret_from_irq /* * "Jump extender" to reach spurious_interrupt diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 292f8b243a5..58b3b14873c 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -291,7 +291,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c) * for documentation. Commented out because it shares * it's c0_prid id number with the TX3900. */ - c->cputype = CPU_R4650; + c->cputype = CPU_R4650; c->isa_level = MIPS_CPU_ISA_III; c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_LLSC; c->tlbsize = 48; @@ -604,7 +604,7 @@ static inline void cpu_probe_alchemy(struct cpuinfo_mips *c) case PRID_IMP_AU1_REV2: switch ((c->processor_id >> 24) & 0xff) { case 0: - c->cputype = CPU_AU1000; + c->cputype = CPU_AU1000; break; case 1: c->cputype = CPU_AU1500; @@ -705,7 +705,7 @@ __init void cpu_probe(void) break; case PRID_COMP_PHILIPS: cpu_probe_philips(c); - break; + break; default: c->cputype = CPU_UNKNOWN; } diff --git a/arch/mips/kernel/gdb-low.S b/arch/mips/kernel/gdb-low.S index 83b8986f940..235ad9f6bd3 100644 --- a/arch/mips/kernel/gdb-low.S +++ b/arch/mips/kernel/gdb-low.S @@ -41,7 +41,7 @@ */ .align 5 NESTED(trap_low, GDB_FR_SIZE, sp) - .set noat + .set noat .set noreorder mfc0 k0, CP0_STATUS diff --git a/arch/mips/kernel/signal-common.h b/arch/mips/kernel/signal-common.h index 36bfc2588aa..3ca786215d4 100644 --- a/arch/mips/kernel/signal-common.h +++ b/arch/mips/kernel/signal-common.h @@ -166,11 +166,11 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size) sp = regs->regs[29]; /* - * FPU emulator may have it's own trampoline active just - * above the user stack, 16-bytes before the next lowest - * 16 byte boundary. Try to avoid trashing it. - */ - sp -= 32; + * FPU emulator may have it's own trampoline active just + * above the user stack, 16-bytes before the next lowest + * 16 byte boundary. Try to avoid trashing it. + */ + sp -= 32; /* This is the X/Open sanctioned signal stack switching. */ if ((ka->sa.sa_flags & SA_ONSTACK) && (sas_ss_flags (sp) == 0)) diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index 1c7241ba692..f32a22997c3 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -624,11 +624,11 @@ static inline void __user *get_sigframe(struct k_sigaction *ka, sp = regs->regs[29]; /* - * FPU emulator may have it's own trampoline active just - * above the user stack, 16-bytes before the next lowest - * 16 byte boundary. Try to avoid trashing it. - */ - sp -= 32; + * FPU emulator may have it's own trampoline active just + * above the user stack, 16-bytes before the next lowest + * 16 byte boundary. Try to avoid trashing it. + */ + sp -= 32; /* This is the X/Open sanctioned signal stack switching. */ if ((ka->sa.sa_flags & SA_ONSTACK) && (sas_ss_flags (sp) == 0)) diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 005debbfbe8..bed0eb6cf55 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -576,7 +576,7 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31) } #endif /* - * Unimplemented operation exception. If we've got the full + * Unimplemented operation exception. If we've got the full * software emulator on-board, let's use it... * * Force FPU to dump state into task/thread context. We're diff --git a/arch/mips/lasat/image/romscript.normal b/arch/mips/lasat/image/romscript.normal index ca22336f6c3..988f8ad189c 100644 --- a/arch/mips/lasat/image/romscript.normal +++ b/arch/mips/lasat/image/romscript.normal @@ -16,7 +16,8 @@ SECTIONS _image_start = ADDR(.data); _image_size = SIZEOF(.data); - .other : { - *(.*) + .other : + { + *(.*) } } diff --git a/arch/mips/mips-boards/generic/mipsIRQ.S b/arch/mips/mips-boards/generic/mipsIRQ.S index a397ecb872d..ddd5c73a297 100644 --- a/arch/mips/mips-boards/generic/mipsIRQ.S +++ b/arch/mips/mips-boards/generic/mipsIRQ.S @@ -98,7 +98,7 @@ and s0, s1 #if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) - .set mips32 + .set mips32 clz a0, s0 .set mips0 negu a0 diff --git a/arch/mips/mips-boards/sim/sim_IRQ.c b/arch/mips/mips-boards/sim/sim_IRQ.c index 9987a85aabe..5b84c7fe102 100644 --- a/arch/mips/mips-boards/sim/sim_IRQ.c +++ b/arch/mips/mips-boards/sim/sim_IRQ.c @@ -96,7 +96,7 @@ andi a0, s0, CAUSEF_IP3 # delay slot, check hw1 interrupt #else beq a0, zero, 1f # delay slot, check hw3 interrupt - andi a0, s0, CAUSEF_IP5 + andi a0, s0, CAUSEF_IP5 #endif /* Wheee, combined hardware level zero interrupt. */ diff --git a/arch/mips/mips-boards/sim/sim_irq.S b/arch/mips/mips-boards/sim/sim_irq.S index 835f0387fcd..da52297a221 100644 --- a/arch/mips/mips-boards/sim/sim_irq.S +++ b/arch/mips/mips-boards/sim/sim_irq.S @@ -42,7 +42,7 @@ and s0, s1 #if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) - .set mips32 + .set mips32 clz a0, s0 .set mips0 negu a0 diff --git a/arch/mips/mips-boards/sim/sim_smp.c b/arch/mips/mips-boards/sim/sim_smp.c index 19824359f5d..a9f0c2bfe4a 100644 --- a/arch/mips/mips-boards/sim/sim_smp.c +++ b/arch/mips/mips-boards/sim/sim_smp.c @@ -115,7 +115,7 @@ void prom_prepare_cpus(unsigned int max_cpus) #ifdef CONFIG_MIPS_MT_SMTC void mipsmt_prepare_cpus(int c); /* - * As noted above, we can assume a single CPU for now + * As noted above, we can assume a single CPU for now * but it may be multithreaded. */ diff --git a/arch/mips/mm/c-r3k.c b/arch/mips/mm/c-r3k.c index 27f4fa25e8c..9dd1352d574 100644 --- a/arch/mips/mm/c-r3k.c +++ b/arch/mips/mm/c-r3k.c @@ -129,7 +129,7 @@ static void r3k_flush_icache_range(unsigned long start, unsigned long end) "sb\t$0, 0x014(%0)\n\t" "sb\t$0, 0x018(%0)\n\t" "sb\t$0, 0x01c(%0)\n\t" - "sb\t$0, 0x020(%0)\n\t" + "sb\t$0, 0x020(%0)\n\t" "sb\t$0, 0x024(%0)\n\t" "sb\t$0, 0x028(%0)\n\t" "sb\t$0, 0x02c(%0)\n\t" @@ -145,7 +145,7 @@ static void r3k_flush_icache_range(unsigned long start, unsigned long end) "sb\t$0, 0x054(%0)\n\t" "sb\t$0, 0x058(%0)\n\t" "sb\t$0, 0x05c(%0)\n\t" - "sb\t$0, 0x060(%0)\n\t" + "sb\t$0, 0x060(%0)\n\t" "sb\t$0, 0x064(%0)\n\t" "sb\t$0, 0x068(%0)\n\t" "sb\t$0, 0x06c(%0)\n\t" @@ -182,31 +182,31 @@ static void r3k_flush_dcache_range(unsigned long start, unsigned long end) "sb\t$0, 0x004(%0)\n\t" "sb\t$0, 0x008(%0)\n\t" "sb\t$0, 0x00c(%0)\n\t" - "sb\t$0, 0x010(%0)\n\t" + "sb\t$0, 0x010(%0)\n\t" "sb\t$0, 0x014(%0)\n\t" "sb\t$0, 0x018(%0)\n\t" "sb\t$0, 0x01c(%0)\n\t" - "sb\t$0, 0x020(%0)\n\t" + "sb\t$0, 0x020(%0)\n\t" "sb\t$0, 0x024(%0)\n\t" "sb\t$0, 0x028(%0)\n\t" "sb\t$0, 0x02c(%0)\n\t" - "sb\t$0, 0x030(%0)\n\t" + "sb\t$0, 0x030(%0)\n\t" "sb\t$0, 0x034(%0)\n\t" "sb\t$0, 0x038(%0)\n\t" "sb\t$0, 0x03c(%0)\n\t" - "sb\t$0, 0x040(%0)\n\t" + "sb\t$0, 0x040(%0)\n\t" "sb\t$0, 0x044(%0)\n\t" "sb\t$0, 0x048(%0)\n\t" "sb\t$0, 0x04c(%0)\n\t" - "sb\t$0, 0x050(%0)\n\t" + "sb\t$0, 0x050(%0)\n\t" "sb\t$0, 0x054(%0)\n\t" "sb\t$0, 0x058(%0)\n\t" "sb\t$0, 0x05c(%0)\n\t" - "sb\t$0, 0x060(%0)\n\t" + "sb\t$0, 0x060(%0)\n\t" "sb\t$0, 0x064(%0)\n\t" "sb\t$0, 0x068(%0)\n\t" "sb\t$0, 0x06c(%0)\n\t" - "sb\t$0, 0x070(%0)\n\t" + "sb\t$0, 0x070(%0)\n\t" "sb\t$0, 0x074(%0)\n\t" "sb\t$0, 0x078(%0)\n\t" "sb\t$0, 0x07c(%0)\n\t" diff --git a/arch/mips/momentum/jaguar_atx/reset.c b/arch/mips/momentum/jaguar_atx/reset.c index c4236b1e59f..ce9fb2e3d95 100644 --- a/arch/mips/momentum/jaguar_atx/reset.c +++ b/arch/mips/momentum/jaguar_atx/reset.c @@ -32,7 +32,7 @@ void momenco_jaguar_restart(char *command) #else void *nvram = (void*) 0xfc807000; #endif - /* Ask the NVRAM/RTC/watchdog chip to assert reset in 1/16 second */ + /* Ask the NVRAM/RTC/watchdog chip to assert reset in 1/16 second */ writeb(0x84, nvram + 0xff7); /* wait for the watchdog to go off */ diff --git a/arch/mips/momentum/jaguar_atx/setup.c b/arch/mips/momentum/jaguar_atx/setup.c index 2699917b640..3784c898db1 100644 --- a/arch/mips/momentum/jaguar_atx/setup.c +++ b/arch/mips/momentum/jaguar_atx/setup.c @@ -461,7 +461,7 @@ void __init plat_setup(void) unsigned int tbControl; tbControl = 0 << 26 | /* post trigger delay 0 */ - 0x2 << 16 | /* sequential trace mode */ + 0x2 << 16 | /* sequential trace mode */ // 0x0 << 16 | /* non-sequential trace mode */ // 0xf << 4 | /* watchpoints disabled */ 2 << 2 | /* armed */ diff --git a/arch/mips/momentum/ocelot_3/reset.c b/arch/mips/momentum/ocelot_3/reset.c index 72b4423c086..9d86d246837 100644 --- a/arch/mips/momentum/ocelot_3/reset.c +++ b/arch/mips/momentum/ocelot_3/reset.c @@ -34,7 +34,7 @@ void momenco_ocelot_restart(char *command) /* base address of timekeeper portion of part */ void *nvram = (void *) 0xfc807000L; - /* Ask the NVRAM/RTC/watchdog chip to assert reset in 1/16 second */ + /* Ask the NVRAM/RTC/watchdog chip to assert reset in 1/16 second */ writeb(0x84, nvram + 0xff7); /* wait for the watchdog to go off */ diff --git a/arch/mips/momentum/ocelot_c/reset.c b/arch/mips/momentum/ocelot_c/reset.c index 6a2489f3b9a..9dcd154c776 100644 --- a/arch/mips/momentum/ocelot_c/reset.c +++ b/arch/mips/momentum/ocelot_c/reset.c @@ -34,7 +34,7 @@ void momenco_ocelot_restart(char *command) 0xfc807000; #endif - /* Ask the NVRAM/RTC/watchdog chip to assert reset in 1/16 second */ + /* Ask the NVRAM/RTC/watchdog chip to assert reset in 1/16 second */ writeb(0x84, nvram + 0xff7); /* wait for the watchdog to go off */ diff --git a/arch/mips/pci/fixup-vr4133.c b/arch/mips/pci/fixup-vr4133.c index 03a0ff2fc99..a8a47b494b2 100644 --- a/arch/mips/pci/fixup-vr4133.c +++ b/arch/mips/pci/fixup-vr4133.c @@ -45,7 +45,7 @@ int pcibios_plat_dev_init(struct pci_dev *dev) /* * we have to open the bridges' windows down to 0 because otherwise - * we cannot access ISA south bridge I/O registers that get mapped from + * we cannot access ISA south bridge I/O registers that get mapped from * 0. for example, 8259 PIC would be unaccessible without that */ if(dev->vendor == PCI_VENDOR_ID_INTEL && dev->device == PCI_DEVICE_ID_INTEL_S21152BB) { diff --git a/arch/mips/pci/ops-ddb5477.c b/arch/mips/pci/ops-ddb5477.c index 0406b50a37d..8e57d4c5d90 100644 --- a/arch/mips/pci/ops-ddb5477.c +++ b/arch/mips/pci/ops-ddb5477.c @@ -253,9 +253,9 @@ static int write_config_byte(struct pci_config_swap *swap, static int prefix##_##rw##_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 star val) \ { \ if (size == 1) \ - return rw##_config_byte(pciswap, bus, devfn, where, (u8 star)val); \ + return rw##_config_byte(pciswap, bus, devfn, where, (u8 star)val); \ else if (size == 2) \ - return rw##_config_word(pciswap, bus, devfn, where, (u16 star)val); \ + return rw##_config_word(pciswap, bus, devfn, where, (u16 star)val); \ /* Size must be 4 */ \ return rw##_config_dword(pciswap, bus, devfn, where, val); \ } diff --git a/arch/mips/pci/ops-tx4938.c b/arch/mips/pci/ops-tx4938.c index 4c0dcfce529..0ff083489ef 100644 --- a/arch/mips/pci/ops-tx4938.c +++ b/arch/mips/pci/ops-tx4938.c @@ -34,16 +34,16 @@ struct resource pci_mem_resource = { }; struct resource tx4938_pcic1_pci_io_resource = { - .name = "PCI1 IO", - .start = 0, - .end = 0, - .flags = IORESOURCE_IO + .name = "PCI1 IO", + .start = 0, + .end = 0, + .flags = IORESOURCE_IO }; struct resource tx4938_pcic1_pci_mem_resource = { - .name = "PCI1 mem", - .start = 0, - .end = 0, - .flags = IORESOURCE_MEM + .name = "PCI1 mem", + .start = 0, + .end = 0, + .flags = IORESOURCE_MEM }; static int mkaddr(int bus, int dev_fn, int where, int *flagsp) diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c index ca975e7d32f..f4ef1a35ca1 100644 --- a/arch/mips/pci/pci-bcm1480.c +++ b/arch/mips/pci/pci-bcm1480.c @@ -100,7 +100,7 @@ static int bcm1480_pci_can_access(struct pci_bus *bus, int devfn) if (bus->number == 0) { devno = PCI_SLOT(devfn); - if (bcm1480_bus_status & PCI_DEVICE_MODE) + if (bcm1480_bus_status & PCI_DEVICE_MODE) return 0; else return 1; diff --git a/arch/mips/pci/pci-bcm1480ht.c b/arch/mips/pci/pci-bcm1480ht.c index aca4a2e7a1c..a3eebe5890a 100644 --- a/arch/mips/pci/pci-bcm1480ht.c +++ b/arch/mips/pci/pci-bcm1480ht.c @@ -95,7 +95,7 @@ static int bcm1480ht_can_access(struct pci_bus *bus, int devfn) if (bus->number == 0) { devno = PCI_SLOT(devfn); - if (bcm1480ht_bus_status & PCI_DEVICE_MODE) + if (bcm1480ht_bus_status & PCI_DEVICE_MODE) return 0; } return 1; diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c index efc96ce99ee..6002d2a6a26 100644 --- a/arch/mips/pci/pci-ip27.c +++ b/arch/mips/pci/pci-ip27.c @@ -379,18 +379,18 @@ int __init bridge_probe(nasid_t nasid, int widget_id, int masterwid) bridge = (bridge_t *) RAW_NODE_SWIN_BASE(nasid, widget_id); /* - * Clear all pending interrupts. - */ + * Clear all pending interrupts. + */ bridge->b_int_rst_stat = BRIDGE_IRR_ALL_CLR; /* - * Until otherwise set up, assume all interrupts are from slot 0 - */ + * Until otherwise set up, assume all interrupts are from slot 0 + */ bridge->b_int_device = 0x0; /* - * swap pio's to pci mem and io space (big windows) - */ + * swap pio's to pci mem and io space (big windows) + */ bridge->b_wid_control |= BRIDGE_CTRL_IO_SWAP | BRIDGE_CTRL_MEM_SWAP; diff --git a/arch/mips/philips/pnx8550/common/int.c b/arch/mips/philips/pnx8550/common/int.c index 546144988bf..c500e2d41f2 100644 --- a/arch/mips/philips/pnx8550/common/int.c +++ b/arch/mips/philips/pnx8550/common/int.c @@ -251,7 +251,7 @@ void __init arch_init_irq(void) if (gic_int_line == (PNX8550_INT_GPIO0 - PNX8550_INT_GIC_MIN)) { /* PCI INT through gpio 8, which is setup in * pnx8550_setup.c and routed to GPIO - * Interrupt Level 0 (GPIO Connection 58). + * Interrupt Level 0 (GPIO Connection 58). * Set it active low. */ PNX8550_GIC_REQ(gic_int_line) = 0x1E020000; diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c index ef20d9ac0ba..ed93a979295 100644 --- a/arch/mips/sgi-ip27/ip27-memory.c +++ b/arch/mips/sgi-ip27/ip27-memory.c @@ -540,8 +540,8 @@ void __init mem_init(void) struct page *end, *p; /* - * This will free up the bootmem, ie, slot 0 memory. - */ + * This will free up the bootmem, ie, slot 0 memory. + */ totalram_pages += free_all_bootmem_node(NODE_DATA(node)); /* diff --git a/arch/mips/sgi-ip32/ip32-setup.c b/arch/mips/sgi-ip32/ip32-setup.c index 2c38770b1e1..2f50c79b788 100644 --- a/arch/mips/sgi-ip32/ip32-setup.c +++ b/arch/mips/sgi-ip32/ip32-setup.c @@ -98,7 +98,7 @@ void __init plat_setup(void) board_timer_setup = ip32_timer_setup; #ifdef CONFIG_SERIAL_8250 - { + { static struct uart_port o2_serial[2]; memset(o2_serial, 0, sizeof(o2_serial)); diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c index e19e2be70f7..efe50562f0c 100644 --- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c +++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c @@ -70,10 +70,10 @@ void __init prom_init(void) if ((read_c0_prid() & 0xff) == PRID_REV_TX4927) { mips_machtype = MACH_TOSHIBA_RBTX4927; - toshiba_name = "TX4927"; + toshiba_name = "TX4927"; } else { mips_machtype = MACH_TOSHIBA_RBTX4937; - toshiba_name = "TX4937"; + toshiba_name = "TX4937"; } msize = tx4927_get_mem_size(); diff --git a/arch/mips/tx4938/toshiba_rbtx4938/setup.c b/arch/mips/tx4938/toshiba_rbtx4938/setup.c index 5c7ace982a4..9166cd4557e 100644 --- a/arch/mips/tx4938/toshiba_rbtx4938/setup.c +++ b/arch/mips/tx4938/toshiba_rbtx4938/setup.c @@ -684,7 +684,7 @@ void __init tx4938_board_setup(void) for (i = 0; i < 8; i++) { if (!(tx4938_ebuscptr->cr[i] & 0x8)) continue; /* disabled */ - rbtx4938_ce_base[i] = (unsigned long)TX4938_EBUSC_BA(i); + rbtx4938_ce_base[i] = (unsigned long)TX4938_EBUSC_BA(i); txboard_add_phys_region(rbtx4938_ce_base[i], TX4938_EBUSC_SIZE(i)); } diff --git a/arch/mips/vr41xx/common/bcu.c b/arch/mips/vr41xx/common/bcu.c index de0c1b35f11..ff272b2e839 100644 --- a/arch/mips/vr41xx/common/bcu.c +++ b/arch/mips/vr41xx/common/bcu.c @@ -183,11 +183,11 @@ static inline unsigned long calculate_tclock(uint16_t clkspeed, unsigned long pc switch (current_cpu_data.cputype) { case CPU_VR4111: if (!(clkspeed & DIV2B)) - tclock = pclock / 2; + tclock = pclock / 2; else if (!(clkspeed & DIV3B)) - tclock = pclock / 3; + tclock = pclock / 3; else if (!(clkspeed & DIV4B)) - tclock = pclock / 4; + tclock = pclock / 4; break; case CPU_VR4121: tclock = pclock / DIVT(clkspeed); -- cgit v1.2.3-18-g5258 From c6281edb1d5e307f056fff0e174f60fa6133adc5 Mon Sep 17 00:00:00 2001 From: Thiemo Seufer Date: Tue, 14 Mar 2006 14:35:27 +0000 Subject: [MIPS] Kill tlb-andes.c. Basically identical to c-r4k.c, so maintaining one is really enough. Signed-off-by: Thiemo Seufer Signed-off-by: Ralf Baechle --- arch/mips/mm/Makefile | 2 +- arch/mips/mm/tlb-andes.c | 259 ----------------------------------------------- arch/mips/mm/tlb-r4k.c | 5 + 3 files changed, 6 insertions(+), 260 deletions(-) delete mode 100644 arch/mips/mm/tlb-andes.c (limited to 'arch') diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile index b0178da019f..4a6220116c9 100644 --- a/arch/mips/mm/Makefile +++ b/arch/mips/mm/Makefile @@ -12,7 +12,7 @@ obj-$(CONFIG_HIGHMEM) += highmem.o obj-$(CONFIG_CPU_MIPS32) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o obj-$(CONFIG_CPU_MIPS64) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o obj-$(CONFIG_CPU_NEVADA) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o -obj-$(CONFIG_CPU_R10000) += c-r4k.o cex-gen.o pg-r4k.o tlb-andes.o +obj-$(CONFIG_CPU_R10000) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o obj-$(CONFIG_CPU_R3000) += c-r3k.o tlb-r3k.o pg-r4k.o obj-$(CONFIG_CPU_R4300) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o obj-$(CONFIG_CPU_R4X00) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o diff --git a/arch/mips/mm/tlb-andes.c b/arch/mips/mm/tlb-andes.c deleted file mode 100644 index 3f422a849c4..00000000000 --- a/arch/mips/mm/tlb-andes.c +++ /dev/null @@ -1,259 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1997, 1998, 1999 Ralf Baechle (ralf@gnu.org) - * Copyright (C) 1999 Silicon Graphics, Inc. - * Copyright (C) 2000 Kanoj Sarcar (kanoj@sgi.com) - */ -#include -#include -#include -#include -#include -#include -#include -#include - -extern void build_tlb_refill_handler(void); - -#define NTLB_ENTRIES 64 -#define NTLB_ENTRIES_HALF 32 - -void local_flush_tlb_all(void) -{ - unsigned long flags; - unsigned long old_ctx; - unsigned long entry; - - local_irq_save(flags); - /* Save old context and create impossible VPN2 value */ - old_ctx = read_c0_entryhi() & ASID_MASK; - write_c0_entryhi(CKSEG0); - write_c0_entrylo0(0); - write_c0_entrylo1(0); - - entry = read_c0_wired(); - - /* Blast 'em all away. */ - while (entry < NTLB_ENTRIES) { - write_c0_index(entry); - tlb_write_indexed(); - entry++; - } - write_c0_entryhi(old_ctx); - local_irq_restore(flags); -} - -void local_flush_tlb_mm(struct mm_struct *mm) -{ - int cpu = smp_processor_id(); - if (cpu_context(cpu, mm) != 0) { - drop_mmu_context(mm,cpu); - } -} - -void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, - unsigned long end) -{ - struct mm_struct *mm = vma->vm_mm; - int cpu = smp_processor_id(); - - if (cpu_context(cpu, mm) != 0) { - unsigned long flags; - int size; - - local_irq_save(flags); - size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; - size = (size + 1) >> 1; - if (size <= NTLB_ENTRIES_HALF) { - int oldpid = (read_c0_entryhi() & ASID_MASK); - int newpid = (cpu_context(smp_processor_id(), mm) - & ASID_MASK); - - start &= (PAGE_MASK << 1); - end += ((PAGE_SIZE << 1) - 1); - end &= (PAGE_MASK << 1); - while(start < end) { - int idx; - - write_c0_entryhi(start | newpid); - start += (PAGE_SIZE << 1); - tlb_probe(); - idx = read_c0_index(); - write_c0_entrylo0(0); - write_c0_entrylo1(0); - write_c0_entryhi(CKSEG0); - if(idx < 0) - continue; - tlb_write_indexed(); - } - write_c0_entryhi(oldpid); - } else { - drop_mmu_context(mm, cpu); - } - local_irq_restore(flags); - } -} - -void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) -{ - unsigned long flags; - int size; - - size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; - size = (size + 1) >> 1; - - local_irq_save(flags); - if (size <= NTLB_ENTRIES_HALF) { - int pid = read_c0_entryhi(); - - start &= (PAGE_MASK << 1); - end += ((PAGE_SIZE << 1) - 1); - end &= (PAGE_MASK << 1); - - while (start < end) { - int idx; - - write_c0_entryhi(start); - start += (PAGE_SIZE << 1); - tlb_probe(); - idx = read_c0_index(); - write_c0_entrylo0(0); - write_c0_entrylo1(0); - write_c0_entryhi(CKSEG0 + (idx << (PAGE_SHIFT+1))); - if (idx < 0) - continue; - tlb_write_indexed(); - } - write_c0_entryhi(pid); - } else { - local_flush_tlb_all(); - } - local_irq_restore(flags); -} - -void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page) -{ - if (cpu_context(smp_processor_id(), vma->vm_mm) != 0) { - unsigned long flags; - int oldpid, newpid, idx; - - newpid = (cpu_context(smp_processor_id(), vma->vm_mm) & - ASID_MASK); - page &= (PAGE_MASK << 1); - local_irq_save(flags); - oldpid = (read_c0_entryhi() & ASID_MASK); - write_c0_entryhi(page | newpid); - tlb_probe(); - idx = read_c0_index(); - write_c0_entrylo0(0); - write_c0_entrylo1(0); - write_c0_entryhi(CKSEG0); - if (idx < 0) - goto finish; - tlb_write_indexed(); - - finish: - write_c0_entryhi(oldpid); - local_irq_restore(flags); - } -} - -/* - * This one is only used for pages with the global bit set so we don't care - * much about the ASID. - */ -void local_flush_tlb_one(unsigned long page) -{ - unsigned long flags; - int oldpid, idx; - - local_irq_save(flags); - page &= (PAGE_MASK << 1); - oldpid = read_c0_entryhi() & 0xff; - write_c0_entryhi(page); - tlb_probe(); - idx = read_c0_index(); - write_c0_entrylo0(0); - write_c0_entrylo1(0); - if (idx >= 0) { - /* Make sure all entries differ. */ - write_c0_entryhi(CKSEG0+(idx<<(PAGE_SHIFT+1))); - tlb_write_indexed(); - } - write_c0_entryhi(oldpid); - - local_irq_restore(flags); -} - -/* XXX Simplify this. On the R10000 writing a TLB entry for an virtual - address that already exists will overwrite the old entry and not result - in TLB malfunction or TLB shutdown. */ -void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte) -{ - unsigned long flags; - pgd_t *pgdp; - pud_t *pudp; - pmd_t *pmdp; - pte_t *ptep; - int idx, pid; - - /* - * Handle debugger faulting in for debugee. - */ - if (current->active_mm != vma->vm_mm) - return; - - pid = read_c0_entryhi() & ASID_MASK; - - if ((pid != (cpu_context(smp_processor_id(), vma->vm_mm) & ASID_MASK)) - || (cpu_context(smp_processor_id(), vma->vm_mm) == 0)) { - printk(KERN_WARNING - "%s: Wheee, bogus tlbpid mmpid=%d tlbpid=%d\n", - __FUNCTION__, (int) (cpu_context(smp_processor_id(), - vma->vm_mm) & ASID_MASK), pid); - } - - local_irq_save(flags); - address &= (PAGE_MASK << 1); - write_c0_entryhi(address | (pid)); - pgdp = pgd_offset(vma->vm_mm, address); - tlb_probe(); - pudp = pud_offset(pgdp, address); - pmdp = pmd_offset(pudp, address); - idx = read_c0_index(); - ptep = pte_offset_map(pmdp, address); - write_c0_entrylo0(pte_val(*ptep++) >> 6); - write_c0_entrylo1(pte_val(*ptep) >> 6); - write_c0_entryhi(address | pid); - if (idx < 0) { - tlb_write_random(); - } else { - tlb_write_indexed(); - } - write_c0_entryhi(pid); - local_irq_restore(flags); -} - -void __init tlb_init(void) -{ - /* - * You should never change this register: - * - On R4600 1.7 the tlbp never hits for pages smaller than - * the value in the c0_pagemask register. - * - The entire mm handling assumes the c0_pagemask register to - * be set for 4kb pages. - */ - write_c0_pagemask(PM_4K); - write_c0_wired(0); - write_c0_framemask(0); - - /* From this point on the ARC firmware is dead. */ - local_flush_tlb_all(); - - /* Did I tell you that ARC SUCKS? */ - - build_tlb_refill_handler(); -} diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c index 8297970f0bb..a865f2394cb 100644 --- a/arch/mips/mm/tlb-r4k.c +++ b/arch/mips/mm/tlb-r4k.c @@ -424,8 +424,13 @@ void __init tlb_init(void) probe_tlb(config); write_c0_pagemask(PM_DEFAULT_MASK); write_c0_wired(0); + write_c0_framemask(0); temp_tlb_entry = current_cpu_data.tlbsize - 1; + + /* From this point on the ARC firmware is dead. */ local_flush_tlb_all(); + /* Did I tell you that ARC SUCKS? */ + build_tlb_refill_handler(); } -- cgit v1.2.3-18-g5258 From de862b488e81172d4c610945efd9f3fc7f4b84a7 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Fri, 17 Mar 2006 12:59:22 +0900 Subject: [MIPS] TX49XX has prefetch. The TX49XX has the prefetch instruction. It supports only Pref_Load (hint 0). Actually changes in this patch except for Kconfig are not have any effects, I added these changes to prevent misuse of unsupported hints. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 1 + arch/mips/mm/c-r4k.c | 1 + arch/mips/mm/pg-r4k.c | 10 ++++++++-- 3 files changed, 10 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 97a9769a904..ac2012f033d 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1160,6 +1160,7 @@ config CPU_R4X00 config CPU_TX49XX bool "R49XX" depends on SYS_HAS_CPU_TX49XX + select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 9572ed44f0d..32b7f6aeb98 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -786,6 +786,7 @@ static void __init probe_pcache(void) c->dcache.waybit = 0; c->options |= MIPS_CPU_CACHE_CDEX_P; + c->options |= MIPS_CPU_PREFETCH; break; case CPU_R4000PC: diff --git a/arch/mips/mm/pg-r4k.c b/arch/mips/mm/pg-r4k.c index f51e180072e..e4390dc3eb4 100644 --- a/arch/mips/mm/pg-r4k.c +++ b/arch/mips/mm/pg-r4k.c @@ -124,7 +124,7 @@ static inline void build_nop(void) static inline void build_src_pref(int advance) { - if (!(load_offset & (cpu_dcache_line_size() - 1))) { + if (!(load_offset & (cpu_dcache_line_size() - 1)) && advance) { union mips_instruction mi; mi.i_format.opcode = pref_op; @@ -166,7 +166,7 @@ static inline void build_load_reg(int reg) static inline void build_dst_pref(int advance) { - if (!(store_offset & (cpu_dcache_line_size() - 1))) { + if (!(store_offset & (cpu_dcache_line_size() - 1)) && advance) { union mips_instruction mi; mi.i_format.opcode = pref_op; @@ -340,6 +340,12 @@ void __init build_clear_page(void) if (cpu_has_prefetch) { switch (current_cpu_data.cputype) { + case CPU_TX49XX: + /* TX49 supports only Pref_Load */ + pref_offset_clear = 0; + pref_offset_copy = 0; + break; + case CPU_RM9000: /* * As a workaround for erratum G105 which make the -- cgit v1.2.3-18-g5258 From 947df17cb1be4c7239280a77263c249fde1379ef Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Fri, 24 Feb 2006 21:20:29 -0800 Subject: [MIPS] sys_mmap2 offset argument should always be shifted 12, not PAGE_SHIFT. This patch adjusts the offset argument passed into sys_mmap2 to be always shifted 12, even when the native page size isn't 4K. This is what all existing userspace libraries expect. Signed-off-by: H. Peter Anvin Signed-off-by: Ralf Baechle --- --- arch/mips/kernel/linux32.c | 4 ++++ arch/mips/kernel/syscall.c | 5 ++++- 2 files changed, 8 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index 1e8d24823d3..013bc93688e 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -106,6 +106,10 @@ sys32_mmap2(unsigned long addr, unsigned long len, unsigned long prot, unsigned long error; error = -EINVAL; + if (pgoff & (~PAGE_MASK >> 12)) + goto out; + pgoff >>= PAGE_SHIFT-12; + if (!(flags & MAP_ANONYMOUS)) { error = -EBADF; file = fget(fd); diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c index 55f2bc09529..2aeaa2fd4b3 100644 --- a/arch/mips/kernel/syscall.c +++ b/arch/mips/kernel/syscall.c @@ -162,7 +162,10 @@ asmlinkage unsigned long sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, unsigned long fd, unsigned long pgoff) { - return do_mmap2(addr, len, prot, flags, fd, pgoff); + if (pgoff & (~PAGE_MASK >> 12)) + return -EINVAL; + + return do_mmap2(addr, len, prot, flags, fd, pgoff >> (PAGE_SHIFT-12)); } save_static_function(sys_fork); -- cgit v1.2.3-18-g5258 From 17256052ff8c50f2330d2f297745fdbd6f37b720 Mon Sep 17 00:00:00 2001 From: Martin Michlmayr Date: Mon, 20 Mar 2006 02:51:20 +0000 Subject: [MIPS] Separate CPU entries in /proc/cpuinfo with a blank line. Put in a blank line between CPU entries in /proc/cpuinfo, just like most other architectures (i386, ia64, x86_64) do. Signed-off-by: Martin Michlmayr Signed-off-by: Ralf Baechle --- --- arch/mips/kernel/proc.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c index 86fe15b273c..84ab959f924 100644 --- a/arch/mips/kernel/proc.c +++ b/arch/mips/kernel/proc.c @@ -135,6 +135,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) cpu_has_vce ? "%u" : "not available"); seq_printf(m, fmt, 'D', vced_count); seq_printf(m, fmt, 'I', vcei_count); + seq_printf(m, "\n"); return 0; } -- cgit v1.2.3-18-g5258 From 48e08101c0fa0e1767cdef13fdaea79cad3106a2 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 21 Mar 2006 13:27:48 +0000 Subject: [MIPS] Update defconfigs. Signed-off-by: Ralf Baechle --- arch/mips/configs/atlas_defconfig | 101 +-- arch/mips/configs/bigsur_defconfig | 36 +- arch/mips/configs/capcella_defconfig | 54 +- arch/mips/configs/cobalt_defconfig | 78 +- arch/mips/configs/db1000_defconfig | 52 +- arch/mips/configs/db1100_defconfig | 52 +- arch/mips/configs/db1200_defconfig | 51 +- arch/mips/configs/db1500_defconfig | 99 ++- arch/mips/configs/db1550_defconfig | 56 +- arch/mips/configs/ddb5476_defconfig | 35 +- arch/mips/configs/ddb5477_defconfig | 34 +- arch/mips/configs/decstation_defconfig | 33 +- arch/mips/configs/e55_defconfig | 50 +- arch/mips/configs/ev64120_defconfig | 34 +- arch/mips/configs/ev96100_defconfig | 30 +- arch/mips/configs/ip22_defconfig | 80 ++- arch/mips/configs/ip27_defconfig | 41 +- arch/mips/configs/ip32_defconfig | 45 +- arch/mips/configs/it8172_defconfig | 32 +- arch/mips/configs/ivr_defconfig | 34 +- arch/mips/configs/jaguar-atx_defconfig | 26 +- arch/mips/configs/jmr3927_defconfig | 35 +- arch/mips/configs/lasat200_defconfig | 35 +- arch/mips/configs/malta_defconfig | 95 +-- arch/mips/configs/mipssim_defconfig | 31 +- arch/mips/configs/mpc30x_defconfig | 53 +- arch/mips/configs/ocelot_3_defconfig | 64 +- arch/mips/configs/ocelot_c_defconfig | 34 +- arch/mips/configs/ocelot_defconfig | 30 +- arch/mips/configs/ocelot_g_defconfig | 34 +- arch/mips/configs/pb1100_defconfig | 52 +- arch/mips/configs/pb1500_defconfig | 56 +- arch/mips/configs/pb1550_defconfig | 56 +- arch/mips/configs/pnx8550-jbs_defconfig | 48 +- arch/mips/configs/pnx8550-v2pci_defconfig | 68 +- arch/mips/configs/qemu_defconfig | 16 +- arch/mips/configs/rbhma4500_defconfig | 58 +- arch/mips/configs/rm200_defconfig | 103 +-- arch/mips/configs/sb1250-swarm_defconfig | 36 +- arch/mips/configs/sead_defconfig | 22 +- arch/mips/configs/tb0226_defconfig | 68 +- arch/mips/configs/tb0229_defconfig | 56 +- arch/mips/configs/tb0287_defconfig | 1105 ----------------------------- arch/mips/configs/workpad_defconfig | 50 +- arch/mips/configs/yosemite_defconfig | 29 +- arch/mips/defconfig | 80 ++- 46 files changed, 1537 insertions(+), 1830 deletions(-) delete mode 100644 arch/mips/configs/tb0287_defconfig (limited to 'arch') diff --git a/arch/mips/configs/atlas_defconfig b/arch/mips/configs/atlas_defconfig index 89c21572a59..9e1ae953e96 100644 --- a/arch/mips/configs/atlas_defconfig +++ b/arch/mips/configs/atlas_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:05:52 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:39:52 2006 # CONFIG_MIPS=y @@ -164,26 +164,28 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -335,6 +337,29 @@ CONFIG_BRIDGE_NETFILTER=y CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # # IP: Netfilter Configuration @@ -353,47 +378,30 @@ CONFIG_IP_NF_AMANDA=m CONFIG_IP_NF_PPTP=m CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m CONFIG_IP_NF_MATCH_MULTIPORT=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_DSCP=m CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_PHYSDEV=m CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -CONFIG_IP_NF_MATCH_DCCP=m -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_CONNBYTES=m CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_STRING=m +CONFIG_IP_NF_MATCH_POLICY=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_TARGET_NFQUEUE=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m +# CONFIG_IP_NF_NAT_SNMP_BASIC is not set CONFIG_IP_NF_NAT_IRC=m CONFIG_IP_NF_NAT_FTP=m CONFIG_IP_NF_NAT_TFTP=m @@ -403,13 +411,9 @@ CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CONNMARK=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m +# CONFIG_IP_NF_TARGET_CLUSTERIP is not set CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m @@ -419,26 +423,20 @@ CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_FRAG=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_MULTIPORT=m CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_AHESP=m -CONFIG_IP6_NF_MATCH_LENGTH=m CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_MATCH_PHYSDEV=m +CONFIG_IP6_NF_MATCH_POLICY=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_TARGET_REJECT=m -CONFIG_IP6_NF_TARGET_NFQUEUE=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m @@ -494,6 +492,11 @@ CONFIG_IPDDP_ENCAP=y CONFIG_IPDDP_DECAP=y # CONFIG_X25 is not set # CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set CONFIG_NET_DIVERT=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -553,7 +556,6 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m # # Device Drivers @@ -663,7 +665,7 @@ CONFIG_SCSI_LOGGING=y # SCSI Transport Attributes # CONFIG_SCSI_SPI_ATTRS=y -CONFIG_SCSI_FC_ATTRS=m +CONFIG_SCSI_FC_ATTRS=y CONFIG_SCSI_ISCSI_ATTRS=m CONFIG_SCSI_SAS_ATTRS=m @@ -696,13 +698,7 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -785,6 +781,7 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_DM9000 is not set # # Tulip family network device support @@ -824,6 +821,7 @@ CONFIG_LAN_SAA9730=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set @@ -845,8 +843,6 @@ CONFIG_LAN_SAA9730=y # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set -# CONFIG_IPW_DEBUG is not set -CONFIG_IPW2200=m # # Wan interfaces @@ -926,6 +922,7 @@ CONFIG_HW_CONSOLE=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -933,7 +930,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -970,6 +966,12 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -1076,6 +1078,7 @@ CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set CONFIG_MINIX_FS=m CONFIG_ROMFS_FS=m CONFIG_INOTIFY=y @@ -1118,6 +1121,7 @@ CONFIG_SYSFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_RELAYFS_FS=m +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1225,6 +1229,7 @@ CONFIG_NLS_UTF8=m # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig index e39f1da6297..32984100a75 100644 --- a/arch/mips/configs/bigsur_defconfig +++ b/arch/mips/configs/bigsur_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:05:54 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:39:53 2006 # CONFIG_MIPS=y @@ -169,29 +169,31 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -308,6 +310,11 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -456,6 +463,7 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_DM9000 is not set # # Tulip family network device support @@ -477,6 +485,7 @@ CONFIG_MII=y CONFIG_NET_SB1250_MAC=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -542,12 +551,15 @@ CONFIG_SERIO_RAW=m # # CONFIG_VT is not set CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set # CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set # CONFIG_N_HDLC is not set # CONFIG_SPECIALIX is not set # CONFIG_SX is not set @@ -563,7 +575,6 @@ CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y # # Non-8250 serial port support # -# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -653,6 +664,12 @@ CONFIG_I2C_DEBUG_ALGO=y CONFIG_I2C_DEBUG_BUS=y CONFIG_I2C_DEBUG_CHIP=y +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -731,12 +748,12 @@ CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -769,6 +786,7 @@ CONFIG_SYSFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -830,18 +848,20 @@ CONFIG_MSDOS_PARTITION=y # Kernel hacking # CONFIG_PRINTK_TIME=y -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=16 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig index 5261e29ccf3..6c2961affbd 100644 --- a/arch/mips/configs/capcella_defconfig +++ b/arch/mips/configs/capcella_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:05:55 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:39:54 2006 # CONFIG_MIPS=y @@ -63,9 +63,9 @@ CONFIG_MACH_VR41XX=y # CONFIG_TOSHIBA_JMR3927 is not set # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set -# CONFIG_NEC_CMBVR4133 is not set # CONFIG_CASIO_E55 is not set # CONFIG_IBM_WORKPAD is not set +# CONFIG_NEC_CMBVR4133 is not set # CONFIG_TANBAC_TB022X is not set # CONFIG_VICTOR_MPC30X is not set CONFIG_ZAO_CAPCELLA=y @@ -90,7 +90,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_MIPS64_R2 is not set # CONFIG_CPU_R3000 is not set # CONFIG_CPU_TX39XX is not set -CONFIG_CPU_VR41XX=y +# CONFIG_CPU_VR41XX is not set # CONFIG_CPU_R4300 is not set # CONFIG_CPU_R4X00 is not set # CONFIG_CPU_TX49XX is not set @@ -103,23 +103,18 @@ CONFIG_CPU_VR41XX=y # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_VR41XX=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y # # Kernel type # -CONFIG_32BIT=y +# CONFIG_32BIT is not set # CONFIG_64BIT is not set CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_MIPS_MT is not set -# CONFIG_CPU_ADVANCED is not set +CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y @@ -155,26 +150,28 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -190,7 +187,6 @@ CONFIG_KMOD=y # # Block layer # -# CONFIG_LBD is not set # # IO Schedulers @@ -228,7 +224,6 @@ CONFIG_MMU=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set -CONFIG_TRAD_SIGNALS=y # # Networking @@ -286,6 +281,11 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -306,7 +306,6 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m # # Device Drivers @@ -444,6 +443,7 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_DM9000 is not set # # Tulip family network device support @@ -487,6 +487,7 @@ CONFIG_8139TOO_PIO=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set @@ -508,8 +509,6 @@ CONFIG_8139TOO_PIO=y # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set -# CONFIG_IPW_DEBUG is not set -CONFIG_IPW2200=m # # Wan interfaces @@ -579,11 +578,6 @@ CONFIG_HW_CONSOLE=y # # Non-8250 serial port support # -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_VR41XX=y -CONFIG_SERIAL_VR41XX_CONSOLE=y -# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -599,7 +593,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set -# CONFIG_RTC_VR41XX is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -608,7 +601,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # Ftape, the floppy tape device driver # # CONFIG_DRM is not set -CONFIG_GPIO_VR41XX=y # CONFIG_RAW_DRIVER is not set # @@ -622,6 +614,12 @@ CONFIG_GPIO_VR41XX=y # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -704,11 +702,11 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -741,6 +739,7 @@ CONFIG_SYSFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_RELAYFS_FS=m +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -803,6 +802,7 @@ CONFIG_MSDOS_PARTITION=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig index 1d3ee18ea8b..8336b21d3db 100644 --- a/arch/mips/configs/cobalt_defconfig +++ b/arch/mips/configs/cobalt_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:05:57 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:39:55 2006 # CONFIG_MIPS=y @@ -150,26 +150,28 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -271,6 +273,11 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -291,7 +298,6 @@ CONFIG_IEEE80211=y # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=y CONFIG_IEEE80211_CRYPT_CCMP=y -CONFIG_IEEE80211_CRYPT_TKIP=y # # Device Drivers @@ -364,9 +370,38 @@ CONFIG_BLK_DEV_IDEDISK=y # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y -# CONFIG_BLK_DEV_IDEPCI is not set +CONFIG_BLK_DEV_IDEPCI=y +# CONFIG_IDEPCI_SHARE_IRQ is not set +# CONFIG_BLK_DEV_OFFBOARD is not set +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +# CONFIG_IDEDMA_PCI_AUTO is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set # CONFIG_IDEDMA_AUTO is not set # CONFIG_BLK_DEV_HD is not set @@ -433,11 +468,21 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_DM9000 is not set # # Tulip family network device support # -# CONFIG_NET_TULIP is not set +CONFIG_NET_TULIP=y +CONFIG_DE2104X=y +CONFIG_TULIP=y +# CONFIG_TULIP_MWI is not set +# CONFIG_TULIP_MMIO is not set +# CONFIG_TULIP_NAPI is not set +# CONFIG_DE4X5 is not set +# CONFIG_WINBOND_840 is not set +# CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set # CONFIG_HP100 is not set # CONFIG_NET_PCI is not set @@ -453,6 +498,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -473,8 +519,6 @@ CONFIG_NET_ETHERNET=y # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set -# CONFIG_IPW_DEBUG is not set -CONFIG_IPW2200=y # # Wan interfaces @@ -550,6 +594,7 @@ CONFIG_HW_CONSOLE=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -557,7 +602,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -594,6 +638,12 @@ CONFIG_COBALT_LCD=y # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -678,12 +728,12 @@ CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -716,6 +766,7 @@ CONFIG_SYSFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_RELAYFS_FS=y +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -774,6 +825,7 @@ CONFIG_MSDOS_PARTITION=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig index 18ac7926c05..7f071403c8e 100644 --- a/arch/mips/configs/db1000_defconfig +++ b/arch/mips/configs/db1000_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:05:59 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:39:56 2006 # CONFIG_MIPS=y @@ -151,26 +151,29 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set +CONFIG_OBSOLETE_INTERMODULE=y # # Loadable module support @@ -285,6 +288,21 @@ CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m # CONFIG_NF_CONNTRACK is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # # IP: Netfilter Configuration @@ -312,6 +330,11 @@ CONFIG_NETFILTER_NETLINK_LOG=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -320,6 +343,7 @@ CONFIG_NETFILTER_NETLINK_LOG=m # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y # # Network testing @@ -332,7 +356,6 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m # # Device Drivers @@ -395,6 +418,7 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -512,6 +536,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=m CONFIG_MIPS_AU1X00_ENET=y # CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set # # Ethernet (1000 Mbit) @@ -625,13 +650,13 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_CS=m CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set CONFIG_SERIAL_8250_AU1X00=y # # Non-8250 serial port support # -# CONFIG_SERIAL_AU1X00 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y @@ -675,6 +700,12 @@ CONFIG_SYNCLINK_CS=m # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -773,6 +804,7 @@ CONFIG_REISERFS_FS_SECURITY=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -805,6 +837,7 @@ CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_RELAYFS_FS=m +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -909,6 +942,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y @@ -963,3 +997,7 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig index 4f55f7414c9..98590cac1ec 100644 --- a/arch/mips/configs/db1100_defconfig +++ b/arch/mips/configs/db1100_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:06:00 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:39:57 2006 # CONFIG_MIPS=y @@ -151,26 +151,29 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set +CONFIG_OBSOLETE_INTERMODULE=y # # Loadable module support @@ -274,6 +277,21 @@ CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m # CONFIG_NF_CONNTRACK is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # # IP: Netfilter Configuration @@ -301,6 +319,11 @@ CONFIG_NETFILTER_NETLINK_LOG=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -309,6 +332,7 @@ CONFIG_NETFILTER_NETLINK_LOG=m # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y # # Network testing @@ -321,7 +345,6 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m # # Device Drivers @@ -384,6 +407,7 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -501,6 +525,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=m CONFIG_MIPS_AU1X00_ENET=y # CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set # # Ethernet (1000 Mbit) @@ -600,13 +625,13 @@ CONFIG_HW_CONSOLE=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set CONFIG_SERIAL_8250_AU1X00=y # # Non-8250 serial port support # -# CONFIG_SERIAL_AU1X00 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y @@ -643,6 +668,12 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -772,6 +803,7 @@ CONFIG_REISERFS_FS_SECURITY=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -804,6 +836,7 @@ CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_RELAYFS_FS=m +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -908,6 +941,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y @@ -962,3 +996,7 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig index 0e5de7d05f2..92888472dca 100644 --- a/arch/mips/configs/db1200_defconfig +++ b/arch/mips/configs/db1200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:06:03 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:39:58 2006 # CONFIG_MIPS=y @@ -151,27 +151,30 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set +CONFIG_OBSOLETE_INTERMODULE=y # # Loadable module support @@ -279,6 +282,21 @@ CONFIG_NETFILTER=y # # CONFIG_NETFILTER_NETLINK is not set # CONFIG_NF_CONNTRACK is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # # IP: Netfilter Configuration @@ -306,6 +324,11 @@ CONFIG_NETFILTER=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -314,6 +337,7 @@ CONFIG_NETFILTER=y # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y # # Network testing @@ -385,6 +409,7 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -568,6 +593,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_MIPS_AU1X00_ENET is not set # CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set # # Ethernet (1000 Mbit) @@ -665,13 +691,13 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_SERIAL_8250_CS is not set CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set CONFIG_SERIAL_8250_AU1X00=y # # Non-8250 serial port support # -# CONFIG_SERIAL_AU1X00 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y @@ -715,6 +741,12 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -842,6 +874,7 @@ CONFIG_JFS_FS=y # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -881,6 +914,7 @@ CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -990,6 +1024,7 @@ CONFIG_NLS_UTF8=m # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y @@ -1020,3 +1055,7 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig index 86e7be8412f..5a415b1d4af 100644 --- a/arch/mips/configs/db1500_defconfig +++ b/arch/mips/configs/db1500_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:06:05 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:39:59 2006 # CONFIG_MIPS=y @@ -153,26 +153,29 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set +CONFIG_OBSOLETE_INTERMODULE=y # # Loadable module support @@ -293,6 +296,21 @@ CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m # CONFIG_NF_CONNTRACK is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # # IP: Netfilter Configuration @@ -320,6 +338,11 @@ CONFIG_NETFILTER_NETLINK_LOG=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -328,6 +351,7 @@ CONFIG_NETFILTER_NETLINK_LOG=m # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y # # Network testing @@ -340,7 +364,6 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m # # Device Drivers @@ -403,6 +426,7 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -561,6 +585,7 @@ CONFIG_MIPS_AU1X00_ENET=y # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set # # Tulip family network device support @@ -581,6 +606,7 @@ CONFIG_MIPS_AU1X00_ENET=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -601,8 +627,6 @@ CONFIG_MIPS_AU1X00_ENET=y # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set -# CONFIG_IPW_DEBUG is not set -CONFIG_IPW2200=m # # PCMCIA network device support @@ -692,16 +716,15 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_SERIAL_8250_CS is not set CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set CONFIG_SERIAL_8250_AU1X00=y # # Non-8250 serial port support # -# CONFIG_SERIAL_AU1X00 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -745,6 +768,12 @@ CONFIG_SYNCLINK_CS=m # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -788,8 +817,6 @@ CONFIG_SOUND=y # Advanced Linux Sound Architecture # CONFIG_SND=m -CONFIG_SND_AC97_CODEC=m -CONFIG_SND_AC97_BUS=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m CONFIG_SND_RAWMIDI=m @@ -799,13 +826,16 @@ CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set -CONFIG_SND_GENERIC_DRIVER=y # # Generic devices # +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_AC97_BUS=m # CONFIG_SND_DUMMY is not set CONFIG_SND_VIRMIDI=m CONFIG_SND_MTPAV=m @@ -815,6 +845,7 @@ CONFIG_SND_MTPAV=m # # PCI devices # +# CONFIG_SND_AD1889 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set @@ -823,38 +854,38 @@ CONFIG_SND_MTPAV=m # CONFIG_SND_AU8830 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set -# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set # CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set -# CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_FM801 is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set -# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_YMFPCI is not set # # ALSA MIPS devices @@ -939,12 +970,14 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # may also be needed; see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set # CONFIG_USB_AIPTEK is not set @@ -958,6 +991,7 @@ CONFIG_USB_HIDINPUT=y CONFIG_USB_YEALINK=m # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -1057,6 +1091,7 @@ CONFIG_REISERFS_FS_SECURITY=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -1089,6 +1124,7 @@ CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_RELAYFS_FS=m +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1193,6 +1229,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y @@ -1247,3 +1284,7 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig index ea5ab0ca577..8dc1f18badf 100644 --- a/arch/mips/configs/db1550_defconfig +++ b/arch/mips/configs/db1550_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:06:07 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:40:00 2006 # CONFIG_MIPS=y @@ -152,26 +152,29 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set +CONFIG_OBSOLETE_INTERMODULE=y # # Loadable module support @@ -292,6 +295,21 @@ CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m # CONFIG_NF_CONNTRACK is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # # IP: Netfilter Configuration @@ -319,6 +337,11 @@ CONFIG_NETFILTER_NETLINK_LOG=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -327,6 +350,7 @@ CONFIG_NETFILTER_NETLINK_LOG=m # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y # # Network testing @@ -339,7 +363,6 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m # # Device Drivers @@ -402,6 +425,7 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -593,6 +617,7 @@ CONFIG_MIPS_AU1X00_ENET=y # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set # # Tulip family network device support @@ -613,6 +638,7 @@ CONFIG_MIPS_AU1X00_ENET=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -633,8 +659,6 @@ CONFIG_MIPS_AU1X00_ENET=y # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set -# CONFIG_IPW_DEBUG is not set -CONFIG_IPW2200=m # # PCMCIA network device support @@ -732,16 +756,15 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_SERIAL_8250_CS is not set CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set CONFIG_SERIAL_8250_AU1X00=y # # Non-8250 serial port support # -# CONFIG_SERIAL_AU1X00 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -785,6 +808,12 @@ CONFIG_SYNCLINK_CS=m # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -878,6 +907,7 @@ CONFIG_REISERFS_FS_SECURITY=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -910,6 +940,7 @@ CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_RELAYFS_FS=m +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1014,6 +1045,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y @@ -1068,3 +1100,7 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/mips/configs/ddb5476_defconfig b/arch/mips/configs/ddb5476_defconfig index a81e2de6947..8fae63e47e5 100644 --- a/arch/mips/configs/ddb5476_defconfig +++ b/arch/mips/configs/ddb5476_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:06:09 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:40:02 2006 # CONFIG_MIPS=y @@ -151,26 +151,28 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -276,6 +278,11 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -296,7 +303,6 @@ CONFIG_IEEE80211=y # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=y CONFIG_IEEE80211_CRYPT_CCMP=y -CONFIG_IEEE80211_CRYPT_TKIP=y # # Device Drivers @@ -445,6 +451,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_SMC is not set +# CONFIG_DM9000 is not set # CONFIG_NET_VENDOR_RACAL is not set # @@ -469,6 +476,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -489,8 +497,6 @@ CONFIG_NET_ETHERNET=y # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set -# CONFIG_IPW_DEBUG is not set -CONFIG_IPW2200=y # # Wan interfaces @@ -566,6 +572,7 @@ CONFIG_HW_CONSOLE=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -573,7 +580,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -610,6 +616,12 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -669,7 +681,6 @@ CONFIG_FB=y # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_SMIVGX is not set -# CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_VIRTUAL is not set @@ -729,11 +740,11 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -766,6 +777,7 @@ CONFIG_SYSFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_RELAYFS_FS=y +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -825,6 +837,7 @@ CONFIG_MSDOS_PARTITION=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y diff --git a/arch/mips/configs/ddb5477_defconfig b/arch/mips/configs/ddb5477_defconfig index f1c27c2fb03..a0fcd44e770 100644 --- a/arch/mips/configs/ddb5477_defconfig +++ b/arch/mips/configs/ddb5477_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:06:11 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:40:02 2006 # CONFIG_MIPS=y @@ -151,26 +151,28 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -275,6 +277,11 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -295,7 +302,6 @@ CONFIG_IEEE80211=y # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=y CONFIG_IEEE80211_CRYPT_CCMP=y -CONFIG_IEEE80211_CRYPT_TKIP=y # # Device Drivers @@ -414,6 +420,7 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_DM9000 is not set # # Tulip family network device support @@ -453,6 +460,7 @@ CONFIG_PCNET32=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set @@ -474,8 +482,6 @@ CONFIG_PCNET32=y # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set -# CONFIG_IPW_DEBUG is not set -CONFIG_IPW2200=y # # Wan interfaces @@ -551,6 +557,7 @@ CONFIG_HW_CONSOLE=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -558,7 +565,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -595,6 +601,12 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -677,11 +689,11 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -714,6 +726,7 @@ CONFIG_SYSFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_RELAYFS_FS=y +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -776,6 +789,7 @@ CONFIG_MSDOS_PARTITION=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig index 08a4de6ec4a..5a181eadd43 100644 --- a/arch/mips/configs/decstation_defconfig +++ b/arch/mips/configs/decstation_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:06:13 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:40:03 2006 # CONFIG_MIPS=y @@ -150,27 +150,29 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -278,6 +280,11 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -298,7 +305,6 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m # # Device Drivers @@ -436,6 +442,7 @@ CONFIG_CICADA_PHY=m # CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_DM9000 is not set CONFIG_DECLANCE=y # @@ -538,6 +545,12 @@ CONFIG_RTC=y # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -636,12 +649,12 @@ CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -674,6 +687,7 @@ CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_RELAYFS_FS=m +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -734,6 +748,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SGI_PARTITION is not set CONFIG_ULTRIX_PARTITION=y # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # @@ -750,18 +765,20 @@ CONFIG_ULTRIX_PARTITION=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig index c9070cef08b..8fbfc06a6a2 100644 --- a/arch/mips/configs/e55_defconfig +++ b/arch/mips/configs/e55_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:06:14 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:40:04 2006 # CONFIG_MIPS=y @@ -63,9 +63,9 @@ CONFIG_MACH_VR41XX=y # CONFIG_TOSHIBA_JMR3927 is not set # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set -# CONFIG_NEC_CMBVR4133 is not set CONFIG_CASIO_E55=y # CONFIG_IBM_WORKPAD is not set +# CONFIG_NEC_CMBVR4133 is not set # CONFIG_TANBAC_TB022X is not set # CONFIG_VICTOR_MPC30X is not set # CONFIG_ZAO_CAPCELLA is not set @@ -88,7 +88,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_MIPS64_R2 is not set # CONFIG_CPU_R3000 is not set # CONFIG_CPU_TX39XX is not set -CONFIG_CPU_VR41XX=y +# CONFIG_CPU_VR41XX is not set # CONFIG_CPU_R4300 is not set # CONFIG_CPU_R4X00 is not set # CONFIG_CPU_TX49XX is not set @@ -101,23 +101,18 @@ CONFIG_CPU_VR41XX=y # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_VR41XX=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y # # Kernel type # -CONFIG_32BIT=y +# CONFIG_32BIT is not set # CONFIG_64BIT is not set CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_MIPS_MT is not set -# CONFIG_CPU_ADVANCED is not set +CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y @@ -153,26 +148,28 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -188,7 +185,6 @@ CONFIG_KMOD=y # # Block layer # -# CONFIG_LBD is not set # # IO Schedulers @@ -223,7 +219,6 @@ CONFIG_MMU=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set -CONFIG_TRAD_SIGNALS=y # # Networking @@ -278,6 +273,11 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -298,7 +298,6 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m # # Device Drivers @@ -433,6 +432,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_SMC is not set +# CONFIG_DM9000 is not set # CONFIG_NET_VENDOR_RACAL is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set @@ -531,10 +531,6 @@ CONFIG_HW_CONSOLE=y # # Non-8250 serial port support # -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_VR41XX=y -CONFIG_SERIAL_VR41XX_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -563,14 +559,12 @@ CONFIG_WATCHDOG=y # CONFIG_WDT is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set -# CONFIG_RTC_VR41XX is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # # Ftape, the floppy tape device driver # -CONFIG_GPIO_VR41XX=y # CONFIG_RAW_DRIVER is not set # @@ -584,6 +578,12 @@ CONFIG_GPIO_VR41XX=y # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -665,11 +665,11 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -702,6 +702,7 @@ CONFIG_SYSFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_RELAYFS_FS=m +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -763,6 +764,7 @@ CONFIG_MSDOS_PARTITION=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y diff --git a/arch/mips/configs/ev64120_defconfig b/arch/mips/configs/ev64120_defconfig index aa24d85ea94..f2d43be6900 100644 --- a/arch/mips/configs/ev64120_defconfig +++ b/arch/mips/configs/ev64120_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:06:16 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:40:05 2006 # CONFIG_MIPS=y @@ -153,26 +153,28 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -282,6 +284,11 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -302,7 +309,6 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m # # Device Drivers @@ -420,6 +426,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_DM9000 is not set # # Tulip family network device support @@ -440,6 +447,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -460,8 +468,6 @@ CONFIG_NET_ETHERNET=y # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set -# CONFIG_IPW_DEBUG is not set -CONFIG_IPW2200=m # # Wan interfaces @@ -545,6 +551,7 @@ CONFIG_HW_CONSOLE=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -552,7 +559,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -589,6 +595,12 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -671,11 +683,11 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -708,6 +720,7 @@ CONFIG_SYSFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_RELAYFS_FS=m +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -767,6 +780,7 @@ CONFIG_MSDOS_PARTITION=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y diff --git a/arch/mips/configs/ev96100_defconfig b/arch/mips/configs/ev96100_defconfig index eeed0e5ad26..ac5841c4b69 100644 --- a/arch/mips/configs/ev96100_defconfig +++ b/arch/mips/configs/ev96100_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:06:18 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:40:06 2006 # CONFIG_MIPS=y @@ -157,26 +157,28 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -284,6 +286,11 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -304,7 +311,6 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m # # Device Drivers @@ -407,6 +413,7 @@ CONFIG_CICADA_PHY=m CONFIG_NET_ETHERNET=y # CONFIG_MII is not set CONFIG_MIPS_GT96100ETH=y +# CONFIG_DM9000 is not set # # Ethernet (1000 Mbit) @@ -496,6 +503,7 @@ CONFIG_HW_CONSOLE=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -537,6 +545,12 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -617,11 +631,11 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -654,6 +668,7 @@ CONFIG_SYSFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_RELAYFS_FS=m +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -713,6 +728,7 @@ CONFIG_MSDOS_PARTITION=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig index e56351abf87..42d5cd7927c 100644 --- a/arch/mips/configs/ip22_defconfig +++ b/arch/mips/configs/ip22_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:06:20 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:39:51 2006 # CONFIG_MIPS=y @@ -158,27 +158,29 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -317,6 +319,28 @@ CONFIG_NETFILTER=y CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # # IP: Netfilter Configuration @@ -335,39 +359,23 @@ CONFIG_IP_NF_AMANDA=m CONFIG_IP_NF_PPTP=m CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m CONFIG_IP_NF_MATCH_MULTIPORT=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_DSCP=m CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -CONFIG_IP_NF_MATCH_DCCP=m -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_CONNBYTES=m CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_STRING=m +CONFIG_IP_NF_MATCH_POLICY=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_TARGET_NFQUEUE=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m @@ -384,13 +392,9 @@ CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CONNMARK=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m @@ -400,25 +404,20 @@ CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_FRAG=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_MULTIPORT=m CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_AHESP=m -CONFIG_IP6_NF_MATCH_LENGTH=m CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_POLICY=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_TARGET_REJECT=m -CONFIG_IP6_NF_TARGET_NFQUEUE=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m @@ -445,6 +444,11 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set CONFIG_NET_DIVERT=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -504,7 +508,6 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m # # Device Drivers @@ -641,6 +644,7 @@ CONFIG_CICADA_PHY=m # CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_DM9000 is not set CONFIG_SGISEEQ=y # @@ -786,6 +790,12 @@ CONFIG_MAX_RAW_DEVS=256 # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -892,6 +902,7 @@ CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set CONFIG_MINIX_FS=m # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -934,6 +945,7 @@ CONFIG_SYSFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_RELAYFS_FS=m +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1007,6 +1019,7 @@ CONFIG_MSDOS_PARTITION=y CONFIG_SGI_PARTITION=y # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # @@ -1062,6 +1075,7 @@ CONFIG_NLS_UTF8=m # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index 009ec9d9773..8c40590737e 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -132,6 +132,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_SMP=y CONFIG_NR_CPUS=64 CONFIG_PREEMPT_NONE=y @@ -158,28 +159,30 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_CPUSETS=y CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -289,6 +292,10 @@ CONFIG_TCP_CONG_BIC=y # # CONFIG_IP_SCTP is not set +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -356,7 +363,6 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m # # Device Drivers @@ -367,7 +373,7 @@ CONFIG_IEEE80211_CRYPT_TKIP=m # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y # # Connector - unified userspace <-> kernelspace linker @@ -441,7 +447,7 @@ CONFIG_SCSI_LOGGING=y # SCSI Transport Attributes # CONFIG_SCSI_SPI_ATTRS=y -# CONFIG_SCSI_FC_ATTRS is not set +CONFIG_SCSI_FC_ATTRS=y CONFIG_SCSI_ISCSI_ATTRS=m CONFIG_SCSI_SAS_ATTRS=m @@ -469,13 +475,7 @@ CONFIG_SCSI_SAS_ATTRS=m # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_FC is not set CONFIG_SCSI_QLOGIC_1280=y -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -560,6 +560,7 @@ CONFIG_SGI_IOC3_ETH_HW_TX_CSUM=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_DM9000 is not set # # Tulip family network device support @@ -580,6 +581,7 @@ CONFIG_SGI_IOC3_ETH_HW_TX_CSUM=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -600,8 +602,6 @@ CONFIG_SGI_IOC3_ETH_HW_TX_CSUM=y # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set -# CONFIG_IPW_DEBUG is not set -CONFIG_IPW2200=m # # Wan interfaces @@ -655,6 +655,7 @@ CONFIG_SERIO_RAW=m CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y @@ -704,6 +705,12 @@ CONFIG_SGI_IP27_RTC=y # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -800,6 +807,7 @@ CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -833,6 +841,7 @@ CONFIG_SYSFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_RELAYFS_FS=m +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -893,6 +902,7 @@ CONFIG_MSDOS_PARTITION=y CONFIG_SGI_PARTITION=y # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # @@ -909,6 +919,7 @@ CONFIG_SGI_PARTITION=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=15 CONFIG_CROSSCOMPILE=y diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig index 54afa2556f5..7fdcaf51fac 100644 --- a/arch/mips/configs/ip32_defconfig +++ b/arch/mips/configs/ip32_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:06:24 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:40:09 2006 # CONFIG_MIPS=y @@ -158,26 +158,28 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -285,6 +287,11 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -305,7 +312,6 @@ CONFIG_IEEE80211=y # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=y CONFIG_IEEE80211_CRYPT_CCMP=y -CONFIG_IEEE80211_CRYPT_TKIP=y # # Device Drivers @@ -391,7 +397,7 @@ CONFIG_SCSI_LOGGING=y # SCSI Transport Attributes # CONFIG_SCSI_SPI_ATTRS=y -# CONFIG_SCSI_FC_ATTRS is not set +CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_ISCSI_ATTRS is not set CONFIG_SCSI_SAS_ATTRS=y @@ -424,13 +430,7 @@ CONFIG_AIC7XXX_REG_PRETTY_PRINT=y # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -497,6 +497,7 @@ CONFIG_SGI_O2MACE_ETH=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_DM9000 is not set # # Tulip family network device support @@ -517,6 +518,7 @@ CONFIG_SGI_O2MACE_ETH=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -537,8 +539,6 @@ CONFIG_SGI_O2MACE_ETH=y # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set -# CONFIG_IPW_DEBUG is not set -CONFIG_IPW2200=y # # Wan interfaces @@ -616,6 +616,7 @@ CONFIG_HW_CONSOLE=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -623,7 +624,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -660,6 +660,12 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -742,11 +748,11 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -779,6 +785,7 @@ CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_RELAYFS_FS=y +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -834,6 +841,7 @@ CONFIG_PARTITION_ADVANCED=y CONFIG_SGI_PARTITION=y # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # @@ -850,6 +858,7 @@ CONFIG_SGI_PARTITION=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y diff --git a/arch/mips/configs/it8172_defconfig b/arch/mips/configs/it8172_defconfig index b5fa9639db6..c716996d9ec 100644 --- a/arch/mips/configs/it8172_defconfig +++ b/arch/mips/configs/it8172_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:06:26 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:40:10 2006 # CONFIG_MIPS=y @@ -153,26 +153,29 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set +CONFIG_OBSOLETE_INTERMODULE=y # # Loadable module support @@ -281,6 +284,11 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -301,7 +309,6 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m # # Device Drivers @@ -362,6 +369,7 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -500,6 +508,7 @@ CONFIG_CICADA_PHY=m # CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_DM9000 is not set # # Ethernet (1000 Mbit) @@ -593,6 +602,7 @@ CONFIG_HW_CONSOLE=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -634,6 +644,12 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -728,11 +744,11 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -765,6 +781,7 @@ CONFIG_SYSFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_RELAYFS_FS=m +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -826,6 +843,7 @@ CONFIG_MSDOS_PARTITION=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y diff --git a/arch/mips/configs/ivr_defconfig b/arch/mips/configs/ivr_defconfig index 71386938d47..a8376d125e1 100644 --- a/arch/mips/configs/ivr_defconfig +++ b/arch/mips/configs/ivr_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:06:27 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:40:11 2006 # CONFIG_MIPS=y @@ -150,26 +150,28 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -280,6 +282,11 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -300,7 +307,6 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m # # Device Drivers @@ -440,6 +446,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_DM9000 is not set # # Tulip family network device support @@ -460,6 +467,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -480,8 +488,6 @@ CONFIG_NET_ETHERNET=y # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set -# CONFIG_IPW_DEBUG is not set -CONFIG_IPW2200=m # # Wan interfaces @@ -560,6 +566,7 @@ CONFIG_IT8172_SCR1=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -567,7 +574,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -603,6 +609,12 @@ CONFIG_RTC=y # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -685,11 +697,11 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -722,6 +734,7 @@ CONFIG_SYSFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_RELAYFS_FS=m +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -781,6 +794,7 @@ CONFIG_MSDOS_PARTITION=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y diff --git a/arch/mips/configs/jaguar-atx_defconfig b/arch/mips/configs/jaguar-atx_defconfig index 14fb4688670..316015379db 100644 --- a/arch/mips/configs/jaguar-atx_defconfig +++ b/arch/mips/configs/jaguar-atx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:06:29 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:40:12 2006 # CONFIG_MIPS=y @@ -158,27 +158,28 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_INITRAMFS_SOURCE="" CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -186,6 +187,7 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -294,7 +296,6 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m # # Device Drivers @@ -411,6 +412,7 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_DM9000 is not set # # Tulip family network device support @@ -469,8 +471,6 @@ CONFIG_MV643XX_ETH_2=y # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set -# CONFIG_IPW_DEBUG is not set -CONFIG_IPW2200=m # # Wan interfaces @@ -515,6 +515,7 @@ CONFIG_IPW2200=m CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -522,7 +523,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -557,6 +557,12 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -631,7 +637,6 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -710,6 +715,7 @@ CONFIG_MSDOS_PARTITION=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig index a8ded3d7415..53fbef1ac25 100644 --- a/arch/mips/configs/jmr3927_defconfig +++ b/arch/mips/configs/jmr3927_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:06:31 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:40:13 2006 # CONFIG_MIPS=y @@ -148,26 +148,28 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -272,6 +274,11 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -292,7 +299,6 @@ CONFIG_IEEE80211=y # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=y CONFIG_IEEE80211_CRYPT_CCMP=y -CONFIG_IEEE80211_CRYPT_TKIP=y # # Device Drivers @@ -411,6 +417,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_DM9000 is not set # # Tulip family network device support @@ -431,6 +438,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -451,8 +459,6 @@ CONFIG_NET_ETHERNET=y # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set -# CONFIG_IPW_DEBUG is not set -CONFIG_IPW2200=y # # Wan interfaces @@ -529,6 +535,7 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set # CONFIG_N_HDLC is not set # CONFIG_RISCOM8 is not set # CONFIG_SPECIALIX is not set @@ -545,7 +552,6 @@ CONFIG_SERIAL_NONSTANDARD=y # Non-8250 serial port support # CONFIG_HAS_TXX9_SERIAL=y -# CONFIG_SERIAL_JSM is not set # CONFIG_UNIX98_PTYS is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -582,6 +588,12 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -641,7 +653,6 @@ CONFIG_FB=y # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_SMIVGX is not set -# CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_VIRTUAL is not set @@ -698,11 +709,11 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -735,6 +746,7 @@ CONFIG_SYSFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_RELAYFS_FS=y +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -794,6 +806,7 @@ CONFIG_MSDOS_PARTITION=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y diff --git a/arch/mips/configs/lasat200_defconfig b/arch/mips/configs/lasat200_defconfig index 6c5df76d48d..ef0fa9fc79d 100644 --- a/arch/mips/configs/lasat200_defconfig +++ b/arch/mips/configs/lasat200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:06:33 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:40:14 2006 # CONFIG_MIPS=y @@ -156,26 +156,29 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set +CONFIG_OBSOLETE_INTERMODULE=y # # Loadable module support @@ -282,6 +285,11 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -302,7 +310,6 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m # # Device Drivers @@ -365,6 +372,7 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -548,6 +556,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_DM9000 is not set # # Tulip family network device support @@ -568,6 +577,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -588,8 +598,6 @@ CONFIG_NET_ETHERNET=y # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set -# CONFIG_IPW_DEBUG is not set -CONFIG_IPW2200=m # # Wan interfaces @@ -665,6 +673,7 @@ CONFIG_HW_CONSOLE=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -672,7 +681,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -709,6 +717,12 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -801,6 +815,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -833,6 +848,7 @@ CONFIG_SYSFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_RELAYFS_FS=m +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -895,6 +911,7 @@ CONFIG_MSDOS_PARTITION=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig index da0677a03c1..367d279efdd 100644 --- a/arch/mips/configs/malta_defconfig +++ b/arch/mips/configs/malta_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc5 -# Fri Dec 23 02:21:03 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:40:15 2006 # CONFIG_MIPS=y @@ -170,26 +170,28 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -341,6 +343,29 @@ CONFIG_BRIDGE_NETFILTER=y CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # # IP: Netfilter Configuration @@ -359,40 +384,23 @@ CONFIG_IP_NF_AMANDA=m CONFIG_IP_NF_PPTP=m CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m CONFIG_IP_NF_MATCH_MULTIPORT=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_DSCP=m CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_PHYSDEV=m CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -CONFIG_IP_NF_MATCH_DCCP=m -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_CONNBYTES=m CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_STRING=m +CONFIG_IP_NF_MATCH_POLICY=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_TARGET_NFQUEUE=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m @@ -409,13 +417,9 @@ CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CONNMARK=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m @@ -425,26 +429,20 @@ CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_FRAG=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_MULTIPORT=m CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_AHESP=m -CONFIG_IP6_NF_MATCH_LENGTH=m CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_MATCH_PHYSDEV=m +CONFIG_IP6_NF_MATCH_POLICY=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_TARGET_REJECT=m -CONFIG_IP6_NF_TARGET_NFQUEUE=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m @@ -500,6 +498,11 @@ CONFIG_IPDDP_ENCAP=y CONFIG_IPDDP_DECAP=y # CONFIG_X25 is not set # CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set CONFIG_NET_DIVERT=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -559,7 +562,6 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m # # Device Drivers @@ -734,13 +736,7 @@ CONFIG_AIC7XXX_REG_PRETTY_PRINT=y # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=m -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -823,6 +819,7 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_DM9000 is not set # # Tulip family network device support @@ -862,6 +859,7 @@ CONFIG_PCNET32=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set @@ -883,8 +881,6 @@ CONFIG_PCNET32=y # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set -# CONFIG_IPW_DEBUG is not set -CONFIG_IPW2200=m # # Wan interfaces @@ -961,6 +957,7 @@ CONFIG_HW_CONSOLE=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -968,7 +965,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -1004,6 +1000,12 @@ CONFIG_RTC=y # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -1110,6 +1112,7 @@ CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set CONFIG_MINIX_FS=m CONFIG_ROMFS_FS=m CONFIG_INOTIFY=y @@ -1152,6 +1155,7 @@ CONFIG_SYSFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_RELAYFS_FS=m +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1259,6 +1263,7 @@ CONFIG_NLS_UTF8=m # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y diff --git a/arch/mips/configs/mipssim_defconfig b/arch/mips/configs/mipssim_defconfig index ac39ab7feeb..fe78961762b 100644 --- a/arch/mips/configs/mipssim_defconfig +++ b/arch/mips/configs/mipssim_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:06:37 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:40:16 2006 # CONFIG_MIPS=y @@ -156,27 +156,29 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -297,6 +299,11 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set CONFIG_NET_DIVERT=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -525,6 +532,7 @@ CONFIG_SERIO_SERPORT=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -566,6 +574,12 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -640,11 +654,11 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=y # CONFIG_INOTIFY is not set @@ -677,6 +691,7 @@ CONFIG_PROC_FS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -738,17 +753,19 @@ CONFIG_MSDOS_PARTITION=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y # CONFIG_MAGIC_SYSRQ is not set +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DETECT_SOFTLOCKUP is not set # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="nfsroot=192.168.192.169:/u1/mipsel,timeo=20 ip=dhcp" diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig index 2b5ea37484e..e4620e7f0a5 100644 --- a/arch/mips/configs/mpc30x_defconfig +++ b/arch/mips/configs/mpc30x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:06:39 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:40:17 2006 # CONFIG_MIPS=y @@ -63,9 +63,9 @@ CONFIG_MACH_VR41XX=y # CONFIG_TOSHIBA_JMR3927 is not set # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set -# CONFIG_NEC_CMBVR4133 is not set # CONFIG_CASIO_E55 is not set # CONFIG_IBM_WORKPAD is not set +# CONFIG_NEC_CMBVR4133 is not set # CONFIG_TANBAC_TB022X is not set CONFIG_VICTOR_MPC30X=y # CONFIG_ZAO_CAPCELLA is not set @@ -90,7 +90,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_MIPS64_R2 is not set # CONFIG_CPU_R3000 is not set # CONFIG_CPU_TX39XX is not set -CONFIG_CPU_VR41XX=y +# CONFIG_CPU_VR41XX is not set # CONFIG_CPU_R4300 is not set # CONFIG_CPU_R4X00 is not set # CONFIG_CPU_TX49XX is not set @@ -103,23 +103,18 @@ CONFIG_CPU_VR41XX=y # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_VR41XX=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y # # Kernel type # -CONFIG_32BIT=y +# CONFIG_32BIT is not set # CONFIG_64BIT is not set CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_MIPS_MT is not set -# CONFIG_CPU_ADVANCED is not set +CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y @@ -155,26 +150,28 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -190,7 +187,6 @@ CONFIG_KMOD=y # # Block layer # -# CONFIG_LBD is not set # # IO Schedulers @@ -229,7 +225,6 @@ CONFIG_PCMCIA_IOCTL=y # CONFIG_YENTA is not set # CONFIG_PD6729 is not set # CONFIG_I82092 is not set -CONFIG_PCMCIA_VRC4173=y # # PCI Hotplug Support @@ -241,7 +236,6 @@ CONFIG_PCMCIA_VRC4173=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set -CONFIG_TRAD_SIGNALS=y # # Networking @@ -296,6 +290,11 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -455,6 +454,7 @@ CONFIG_MII=m # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -604,11 +604,6 @@ CONFIG_HW_CONSOLE=y # # Non-8250 serial port support # -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_VR41XX=y -CONFIG_SERIAL_VR41XX_CONSOLE=y -# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -624,7 +619,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set -# CONFIG_RTC_VR41XX is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -640,7 +634,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set -CONFIG_GPIO_VR41XX=y # CONFIG_RAW_DRIVER is not set # @@ -654,6 +647,12 @@ CONFIG_GPIO_VR41XX=y # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -740,6 +739,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # may also be needed; see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices @@ -762,6 +762,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -846,11 +847,11 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -883,6 +884,7 @@ CONFIG_SYSFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_RELAYFS_FS=m +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -941,6 +943,7 @@ CONFIG_MSDOS_PARTITION=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y diff --git a/arch/mips/configs/ocelot_3_defconfig b/arch/mips/configs/ocelot_3_defconfig index 7ad8718c1b6..925d8adef88 100644 --- a/arch/mips/configs/ocelot_3_defconfig +++ b/arch/mips/configs/ocelot_3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:06:41 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:40:18 2006 # CONFIG_MIPS=y @@ -159,27 +159,29 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -291,6 +293,21 @@ CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m # CONFIG_NF_CONNTRACK is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # # IP: Netfilter Configuration @@ -324,6 +341,11 @@ CONFIG_NETFILTER_NETLINK_LOG=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -332,6 +354,7 @@ CONFIG_NETFILTER_NETLINK_LOG=m # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y # # Network testing @@ -344,7 +367,6 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m # # Device Drivers @@ -426,7 +448,7 @@ CONFIG_SCSI_PROC_FS=y # SCSI Transport Attributes # # CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set +CONFIG_SCSI_FC_ATTRS=m CONFIG_SCSI_ISCSI_ATTRS=m CONFIG_SCSI_SAS_ATTRS=m @@ -455,13 +477,7 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=m -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -528,6 +544,7 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_DM9000 is not set # # Tulip family network device support @@ -567,6 +584,7 @@ CONFIG_E100=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set @@ -592,8 +610,6 @@ CONFIG_MV643XX_ETH_2=y # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set -# CONFIG_IPW_DEBUG is not set -CONFIG_IPW2200=m # # Wan interfaces @@ -675,6 +691,7 @@ CONFIG_HW_CONSOLE=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -682,7 +699,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -718,6 +734,12 @@ CONFIG_RTC=y # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -777,7 +799,6 @@ CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_SMIVGX is not set -# CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_VIRTUAL is not set @@ -861,6 +882,7 @@ CONFIG_XFS_EXPORT=y # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -893,6 +915,7 @@ CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_RELAYFS_FS=m +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -999,6 +1022,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y @@ -1052,3 +1076,7 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/mips/configs/ocelot_c_defconfig b/arch/mips/configs/ocelot_c_defconfig index a8fc4c6c10c..ee1cf9b9eb9 100644 --- a/arch/mips/configs/ocelot_c_defconfig +++ b/arch/mips/configs/ocelot_c_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:06:43 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:40:19 2006 # CONFIG_MIPS=y @@ -154,26 +154,28 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -280,6 +282,11 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -300,7 +307,6 @@ CONFIG_IEEE80211=y # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=y CONFIG_IEEE80211_CRYPT_CCMP=y -CONFIG_IEEE80211_CRYPT_TKIP=y # # Device Drivers @@ -419,6 +425,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_DM9000 is not set # # Tulip family network device support @@ -439,6 +446,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -460,8 +468,6 @@ CONFIG_NET_ETHERNET=y # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set -# CONFIG_IPW_DEBUG is not set -CONFIG_IPW2200=y # # Wan interfaces @@ -537,6 +543,7 @@ CONFIG_HW_CONSOLE=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -544,7 +551,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -581,6 +587,12 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -663,11 +675,11 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -700,6 +712,7 @@ CONFIG_SYSFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_RELAYFS_FS=y +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -762,6 +775,7 @@ CONFIG_MSDOS_PARTITION=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y diff --git a/arch/mips/configs/ocelot_defconfig b/arch/mips/configs/ocelot_defconfig index f3787b68bdd..d80ff278f2a 100644 --- a/arch/mips/configs/ocelot_defconfig +++ b/arch/mips/configs/ocelot_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:06:44 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:40:20 2006 # CONFIG_MIPS=y @@ -159,26 +159,28 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -280,6 +282,11 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -300,7 +307,6 @@ CONFIG_IEEE80211=y # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=y CONFIG_IEEE80211_CRYPT_CCMP=y -CONFIG_IEEE80211_CRYPT_TKIP=y # # Device Drivers @@ -403,6 +409,7 @@ CONFIG_CICADA_PHY=y # CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_DM9000 is not set # # Ethernet (1000 Mbit) @@ -492,6 +499,7 @@ CONFIG_HW_CONSOLE=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -533,6 +541,12 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -613,11 +627,11 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -650,6 +664,7 @@ CONFIG_SYSFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_RELAYFS_FS=y +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -712,6 +727,7 @@ CONFIG_MSDOS_PARTITION=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y diff --git a/arch/mips/configs/ocelot_g_defconfig b/arch/mips/configs/ocelot_g_defconfig index dab6c896fbb..c0f508d180c 100644 --- a/arch/mips/configs/ocelot_g_defconfig +++ b/arch/mips/configs/ocelot_g_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:06:46 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:40:21 2006 # CONFIG_MIPS=y @@ -157,26 +157,28 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -283,6 +285,11 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -303,7 +310,6 @@ CONFIG_IEEE80211=y # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=y CONFIG_IEEE80211_CRYPT_CCMP=y -CONFIG_IEEE80211_CRYPT_TKIP=y # # Device Drivers @@ -423,6 +429,7 @@ CONFIG_GALILEO_64240_ETH=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_DM9000 is not set # # Tulip family network device support @@ -443,6 +450,7 @@ CONFIG_GALILEO_64240_ETH=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -463,8 +471,6 @@ CONFIG_GALILEO_64240_ETH=y # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set -# CONFIG_IPW_DEBUG is not set -CONFIG_IPW2200=y # # Wan interfaces @@ -540,6 +546,7 @@ CONFIG_HW_CONSOLE=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -547,7 +554,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -584,6 +590,12 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -666,11 +678,11 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -703,6 +715,7 @@ CONFIG_SYSFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_RELAYFS_FS=y +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -765,6 +778,7 @@ CONFIG_MSDOS_PARTITION=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig index 883626afc47..194b3c772bb 100644 --- a/arch/mips/configs/pb1100_defconfig +++ b/arch/mips/configs/pb1100_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:06:48 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:40:22 2006 # CONFIG_MIPS=y @@ -153,26 +153,29 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set +CONFIG_OBSOLETE_INTERMODULE=y # # Loadable module support @@ -287,6 +290,21 @@ CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m # CONFIG_NF_CONNTRACK is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # # IP: Netfilter Configuration @@ -314,6 +332,11 @@ CONFIG_NETFILTER_NETLINK_LOG=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -322,6 +345,7 @@ CONFIG_NETFILTER_NETLINK_LOG=m # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y # # Network testing @@ -334,7 +358,6 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m # # Device Drivers @@ -397,6 +420,7 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -514,6 +538,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_MIPS_AU1X00_ENET is not set # CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set # # Ethernet (1000 Mbit) @@ -619,13 +644,13 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_SERIAL_8250_CS is not set CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set CONFIG_SERIAL_8250_AU1X00=y # # Non-8250 serial port support # -# CONFIG_SERIAL_AU1X00 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y @@ -669,6 +694,12 @@ CONFIG_SYNCLINK_CS=m # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -767,6 +798,7 @@ CONFIG_REISERFS_FS_SECURITY=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -799,6 +831,7 @@ CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_RELAYFS_FS=m +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -903,6 +936,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y @@ -957,3 +991,7 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig index f8fbc77f924..8985725e6a9 100644 --- a/arch/mips/configs/pb1500_defconfig +++ b/arch/mips/configs/pb1500_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:06:50 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:40:24 2006 # CONFIG_MIPS=y @@ -152,26 +152,29 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set +CONFIG_OBSOLETE_INTERMODULE=y # # Loadable module support @@ -293,6 +296,21 @@ CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m # CONFIG_NF_CONNTRACK is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # # IP: Netfilter Configuration @@ -320,6 +338,11 @@ CONFIG_NETFILTER_NETLINK_LOG=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -328,6 +351,7 @@ CONFIG_NETFILTER_NETLINK_LOG=m # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y # # Network testing @@ -340,7 +364,6 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m # # Device Drivers @@ -403,6 +426,7 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -589,6 +613,7 @@ CONFIG_MIPS_AU1X00_ENET=y # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set # # Tulip family network device support @@ -609,6 +634,7 @@ CONFIG_MIPS_AU1X00_ENET=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -629,8 +655,6 @@ CONFIG_MIPS_AU1X00_ENET=y # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set -# CONFIG_IPW_DEBUG is not set -CONFIG_IPW2200=m # # PCMCIA network device support @@ -728,16 +752,15 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_SERIAL_8250_CS is not set CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set CONFIG_SERIAL_8250_AU1X00=y # # Non-8250 serial port support # -# CONFIG_SERIAL_AU1X00 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -781,6 +804,12 @@ CONFIG_SYNCLINK_CS=m # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -874,6 +903,7 @@ CONFIG_REISERFS_FS_SECURITY=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -906,6 +936,7 @@ CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_RELAYFS_FS=m +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1010,6 +1041,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y @@ -1064,3 +1096,7 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig index 3d694cd68d3..adbf997b540 100644 --- a/arch/mips/configs/pb1550_defconfig +++ b/arch/mips/configs/pb1550_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:06:52 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:40:25 2006 # CONFIG_MIPS=y @@ -152,26 +152,29 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set +CONFIG_OBSOLETE_INTERMODULE=y # # Loadable module support @@ -293,6 +296,21 @@ CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m # CONFIG_NF_CONNTRACK is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # # IP: Netfilter Configuration @@ -320,6 +338,11 @@ CONFIG_NETFILTER_NETLINK_LOG=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -328,6 +351,7 @@ CONFIG_NETFILTER_NETLINK_LOG=m # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y # # Network testing @@ -340,7 +364,6 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m # # Device Drivers @@ -403,6 +426,7 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -589,6 +613,7 @@ CONFIG_MIPS_AU1X00_ENET=y # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set # # Tulip family network device support @@ -609,6 +634,7 @@ CONFIG_MIPS_AU1X00_ENET=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -629,8 +655,6 @@ CONFIG_MIPS_AU1X00_ENET=y # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set -# CONFIG_IPW_DEBUG is not set -CONFIG_IPW2200=m # # PCMCIA network device support @@ -720,16 +744,15 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_SERIAL_8250_CS is not set CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set CONFIG_SERIAL_8250_AU1X00=y # # Non-8250 serial port support # -# CONFIG_SERIAL_AU1X00 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -773,6 +796,12 @@ CONFIG_SYNCLINK_CS=m # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -866,6 +895,7 @@ CONFIG_REISERFS_FS_SECURITY=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -898,6 +928,7 @@ CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_RELAYFS_FS=m +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1002,6 +1033,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y @@ -1056,3 +1088,7 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig index fba624a792a..b5db700450b 100644 --- a/arch/mips/configs/pnx8550-jbs_defconfig +++ b/arch/mips/configs/pnx8550-jbs_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:06:54 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:40:26 2006 # CONFIG_MIPS=y @@ -151,28 +151,30 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -281,6 +283,11 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -308,7 +315,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set # @@ -435,7 +442,7 @@ CONFIG_SCSI_CONSTANTS=y # SCSI Transport Attributes # # CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set +CONFIG_SCSI_FC_ATTRS=y CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_SAS_ATTRS is not set @@ -464,13 +471,7 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -528,6 +529,7 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_DM9000 is not set # # Tulip family network device support @@ -571,6 +573,7 @@ CONFIG_8139TOO_8129=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set @@ -668,7 +671,6 @@ CONFIG_HW_CONSOLE=y # Non-8250 serial port support # # CONFIG_SERIAL_IP3106 is not set -# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -705,6 +707,12 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -801,6 +809,8 @@ CONFIG_USB_STORAGE_USBAT=y CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices @@ -823,6 +833,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -906,11 +917,11 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -946,6 +957,7 @@ CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1049,18 +1061,20 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set CONFIG_DEBUG_SLAB=y +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp" diff --git a/arch/mips/configs/pnx8550-v2pci_defconfig b/arch/mips/configs/pnx8550-v2pci_defconfig index 4c650e70813..4187287f076 100644 --- a/arch/mips/configs/pnx8550-v2pci_defconfig +++ b/arch/mips/configs/pnx8550-v2pci_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:06:58 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:40:28 2006 # CONFIG_MIPS=y @@ -152,27 +152,29 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -279,6 +281,21 @@ CONFIG_NETFILTER=y # # CONFIG_NETFILTER_NETLINK is not set # CONFIG_NF_CONNTRACK is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # # IP: Netfilter Configuration @@ -312,6 +329,11 @@ CONFIG_NETFILTER=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -320,6 +342,7 @@ CONFIG_NETFILTER=y # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y # # Network testing @@ -339,7 +362,7 @@ CONFIG_NETFILTER=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=y # # Connector - unified userspace <-> kernelspace linker @@ -466,7 +489,7 @@ CONFIG_BLK_DEV_SD=y # SCSI Transport Attributes # CONFIG_SCSI_SPI_ATTRS=m -# CONFIG_SCSI_FC_ATTRS is not set +CONFIG_SCSI_FC_ATTRS=y CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_SAS_ATTRS is not set @@ -500,13 +523,7 @@ CONFIG_AIC7XXX_DEBUG_MASK=0 # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -564,6 +581,7 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_DM9000 is not set # # Tulip family network device support @@ -607,6 +625,7 @@ CONFIG_8139TOO=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set @@ -721,6 +740,7 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set # CONFIG_N_HDLC is not set # CONFIG_RISCOM8 is not set # CONFIG_SPECIALIX is not set @@ -737,7 +757,6 @@ CONFIG_SERIAL_NONSTANDARD=y # Non-8250 serial port support # # CONFIG_SERIAL_IP3106 is not set -# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -824,6 +843,12 @@ CONFIG_I2C_ALGOBIT=m # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -863,6 +888,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set @@ -918,7 +944,6 @@ CONFIG_FB=y # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_SMIVGX is not set -# CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_VIRTUAL is not set @@ -988,13 +1013,16 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set CONFIG_USB_HIDDEV=y # CONFIG_USB_AIPTEK is not set @@ -1008,6 +1036,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -1107,6 +1136,7 @@ CONFIG_XFS_EXPORT=y # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -1142,6 +1172,7 @@ CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1246,6 +1277,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y @@ -1299,3 +1331,7 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/mips/configs/qemu_defconfig b/arch/mips/configs/qemu_defconfig index c02becab850..31f5afabafa 100644 --- a/arch/mips/configs/qemu_defconfig +++ b/arch/mips/configs/qemu_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.16-rc2 -# Fri Feb 3 17:14:27 2006 +# Sun Feb 12 19:18:55 2006 # CONFIG_MIPS=y @@ -133,7 +133,6 @@ CONFIG_PREEMPT_NONE=y # Code maturity level options # # CONFIG_EXPERIMENTAL is not set -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -145,7 +144,7 @@ CONFIG_LOCALVERSION_AUTO=y # CONFIG_SWAP is not set # CONFIG_SYSVIPC is not set # CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_SYSCTL is not set +CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_INITRAMFS_SOURCE="" @@ -222,6 +221,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -476,8 +476,9 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_UNIX98_PTYS is not set -# CONFIG_LEGACY_PTYS is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 # # IPMI @@ -627,7 +628,7 @@ CONFIG_FUSE_FS=y # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y -# CONFIG_SYSFS is not set +CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y @@ -680,12 +681,13 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="console=ttyS0 debug ip=172.20.0.2:172.20.0.1::255.255.0.0" +CONFIG_CMDLINE="" # # Security options # # CONFIG_KEYS is not set +# CONFIG_SECURITY is not set # # Cryptographic options diff --git a/arch/mips/configs/rbhma4500_defconfig b/arch/mips/configs/rbhma4500_defconfig index 9aaa43024ae..b126f763cf5 100644 --- a/arch/mips/configs/rbhma4500_defconfig +++ b/arch/mips/configs/rbhma4500_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:07:03 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:40:30 2006 # CONFIG_MIPS=y @@ -160,27 +160,30 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -# CONFIG_KOBJECT_UEVENT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set +CONFIG_OBSOLETE_INTERMODULE=y # # Loadable module support @@ -291,6 +294,21 @@ CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m # CONFIG_NF_CONNTRACK is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # # IP: Netfilter Configuration @@ -324,6 +342,11 @@ CONFIG_NETFILTER_NETLINK_LOG=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -332,6 +355,7 @@ CONFIG_NETFILTER_NETLINK_LOG=m # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y # # Network testing @@ -407,6 +431,7 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -598,6 +623,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_SMC is not set +# CONFIG_DM9000 is not set # CONFIG_NET_VENDOR_RACAL is not set # @@ -654,6 +680,7 @@ CONFIG_NET_PCI=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set @@ -687,8 +714,8 @@ CONFIG_NET_RADIO=y # Wireless 802.11b ISA/PCI cards support # # CONFIG_IPW2100 is not set -# CONFIG_IPW_DEBUG is not set CONFIG_IPW2200=m +# CONFIG_IPW2200_DEBUG is not set # CONFIG_HERMES is not set # CONFIG_ATMEL is not set @@ -795,7 +822,6 @@ CONFIG_HW_CONSOLE=y # Non-8250 serial port support # CONFIG_HAS_TXX9_SERIAL=y -# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -832,6 +858,12 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -887,7 +919,6 @@ CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_ATY=y CONFIG_FB_ATY_CT=y # CONFIG_FB_ATY_GENERIC_LCD is not set -# CONFIG_FB_ATY_XL_INIT is not set # CONFIG_FB_ATY_GX is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set @@ -896,7 +927,6 @@ CONFIG_FB_ATY_CT=y # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_SMIVGX is not set -# CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_VIRTUAL is not set @@ -958,12 +988,14 @@ CONFIG_USB=y # may also be needed; see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set CONFIG_USB_HIDDEV=y # CONFIG_USB_AIPTEK is not set @@ -977,6 +1009,7 @@ CONFIG_USB_HIDDEV=y CONFIG_USB_YEALINK=m # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -1078,6 +1111,7 @@ CONFIG_XFS_EXPORT=y # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -1115,6 +1149,7 @@ CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_RELAYFS_FS=m +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1228,6 +1263,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y @@ -1281,3 +1317,7 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig index abf61095931..463ed3dbf6a 100644 --- a/arch/mips/configs/rm200_defconfig +++ b/arch/mips/configs/rm200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:07:06 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:40:31 2006 # CONFIG_MIPS=y @@ -161,27 +161,29 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -297,6 +299,28 @@ CONFIG_BRIDGE_NETFILTER=y CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # # IP: Netfilter Configuration @@ -315,39 +339,23 @@ CONFIG_IP_NF_AMANDA=m CONFIG_IP_NF_PPTP=m CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m CONFIG_IP_NF_MATCH_MULTIPORT=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_DSCP=m CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_PHYSDEV=m CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -CONFIG_IP_NF_MATCH_DCCP=m -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_STRING=m +CONFIG_IP_NF_MATCH_POLICY=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_TARGET_NFQUEUE=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m @@ -364,13 +372,9 @@ CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CONNMARK=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m @@ -380,26 +384,20 @@ CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_FRAG=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_MULTIPORT=m CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_AHESP=m -CONFIG_IP6_NF_MATCH_LENGTH=m CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_MATCH_PHYSDEV=m +CONFIG_IP6_NF_MATCH_POLICY=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_TARGET_REJECT=m -CONFIG_IP6_NF_TARGET_NFQUEUE=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m @@ -451,6 +449,11 @@ CONFIG_DECNET=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -530,7 +533,6 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m # # Device Drivers @@ -541,7 +543,7 @@ CONFIG_IEEE80211_CRYPT_TKIP=m # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y # # Connector - unified userspace <-> kernelspace linker @@ -657,7 +659,7 @@ CONFIG_SCSI_CONSTANTS=y # SCSI Transport Attributes # CONFIG_SCSI_SPI_ATTRS=y -# CONFIG_SCSI_FC_ATTRS is not set +CONFIG_SCSI_FC_ATTRS=y CONFIG_SCSI_ISCSI_ATTRS=m CONFIG_SCSI_SAS_ATTRS=m @@ -678,6 +680,7 @@ CONFIG_ISCSI_TCP=m CONFIG_MEGARAID_NEWGEN=y CONFIG_MEGARAID_MM=m CONFIG_MEGARAID_MAILBOX=m +# CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DMX3191D is not set @@ -704,13 +707,7 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC395x is not set @@ -801,6 +798,7 @@ CONFIG_MII=y # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_SMC is not set +# CONFIG_DM9000 is not set # CONFIG_NET_VENDOR_RACAL is not set # @@ -858,6 +856,7 @@ CONFIG_EEPRO100=m # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set CONFIG_VIA_VELOCITY=m # CONFIG_TIGON3 is not set @@ -879,8 +878,6 @@ CONFIG_VIA_VELOCITY=m # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set -# CONFIG_IPW_DEBUG is not set -CONFIG_IPW2200=m # # Wan interfaces @@ -969,6 +966,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=m CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y # CONFIG_SERIAL_8250_MANY_PORTS is not set CONFIG_SERIAL_8250_SHARE_IRQ=y @@ -979,7 +977,6 @@ CONFIG_SERIAL_8250_RSA=y # Non-8250 serial port support # CONFIG_SERIAL_CORE=m -# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -1020,6 +1017,12 @@ CONFIG_RTC=m # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -1123,12 +1126,15 @@ CONFIG_USB_STORAGE_DPCM=y CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=m CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set CONFIG_HID_FF=y CONFIG_HID_PID=y CONFIG_LOGITECH_FF=y @@ -1151,6 +1157,7 @@ CONFIG_USB_EGALAX=m CONFIG_USB_YEALINK=m CONFIG_USB_XPAD=m # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -1309,6 +1316,7 @@ CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set CONFIG_MINIX_FS=m CONFIG_ROMFS_FS=m CONFIG_INOTIFY=y @@ -1351,6 +1359,7 @@ CONFIG_SYSFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_RELAYFS_FS=m +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1432,6 +1441,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # @@ -1487,6 +1497,7 @@ CONFIG_NLS_UTF8=m # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig index 6481fb2426f..da68c3f7205 100644 --- a/arch/mips/configs/sb1250-swarm_defconfig +++ b/arch/mips/configs/sb1250-swarm_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:07:09 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:40:32 2006 # CONFIG_MIPS=y @@ -173,27 +173,29 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_CPUSETS=y CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -308,6 +310,11 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -328,7 +335,6 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m # # Device Drivers @@ -471,6 +477,7 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_DM9000 is not set # # Tulip family network device support @@ -492,6 +499,7 @@ CONFIG_MII=y CONFIG_NET_SB1250_MAC=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -512,8 +520,6 @@ CONFIG_NET_SB1250_MAC=y # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set -# CONFIG_IPW_DEBUG is not set -CONFIG_IPW2200=m # # Wan interfaces @@ -559,12 +565,15 @@ CONFIG_SERIO_RAW=m # # CONFIG_VT is not set CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set # CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set # CONFIG_N_HDLC is not set # CONFIG_SPECIALIX is not set # CONFIG_SX is not set @@ -580,7 +589,6 @@ CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y # # Non-8250 serial port support # -# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -617,6 +625,12 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -695,12 +709,12 @@ CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -733,6 +747,7 @@ CONFIG_SYSFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_RELAYFS_FS=m +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -794,6 +809,7 @@ CONFIG_MSDOS_PARTITION=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=15 CONFIG_CROSSCOMPILE=y diff --git a/arch/mips/configs/sead_defconfig b/arch/mips/configs/sead_defconfig index 41dd7082497..9a936d7b7c0 100644 --- a/arch/mips/configs/sead_defconfig +++ b/arch/mips/configs/sead_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:07:10 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:40:33 2006 # CONFIG_MIPS=y @@ -153,25 +153,28 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y -# CONFIG_HOTPLUG is not set # CONFIG_IKCONFIG is not set CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -330,6 +333,7 @@ CONFIG_RAID_ATTRS=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -371,6 +375,12 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -444,7 +454,6 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -481,6 +490,7 @@ CONFIG_SYSFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_RELAYFS_FS=y +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -513,6 +523,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # @@ -529,6 +540,7 @@ CONFIG_PARTITION_ADVANCED=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig index 83969466ecf..c2dee0d1c72 100644 --- a/arch/mips/configs/tb0226_defconfig +++ b/arch/mips/configs/tb0226_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:07:12 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:40:34 2006 # CONFIG_MIPS=y @@ -63,11 +63,12 @@ CONFIG_MACH_VR41XX=y # CONFIG_TOSHIBA_JMR3927 is not set # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set -# CONFIG_NEC_CMBVR4133 is not set # CONFIG_CASIO_E55 is not set # CONFIG_IBM_WORKPAD is not set +# CONFIG_NEC_CMBVR4133 is not set CONFIG_TANBAC_TB022X=y CONFIG_TANBAC_TB0226=y +CONFIG_TANBAC_TB0287=y # CONFIG_VICTOR_MPC30X is not set # CONFIG_ZAO_CAPCELLA is not set CONFIG_PCI_VR41XX=y @@ -91,7 +92,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_MIPS64_R2 is not set # CONFIG_CPU_R3000 is not set # CONFIG_CPU_TX39XX is not set -CONFIG_CPU_VR41XX=y +# CONFIG_CPU_VR41XX is not set # CONFIG_CPU_R4300 is not set # CONFIG_CPU_R4X00 is not set # CONFIG_CPU_TX49XX is not set @@ -104,23 +105,18 @@ CONFIG_CPU_VR41XX=y # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_VR41XX=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y # # Kernel type # -CONFIG_32BIT=y +# CONFIG_32BIT is not set # CONFIG_64BIT is not set CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_MIPS_MT is not set -# CONFIG_CPU_ADVANCED is not set +CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y @@ -156,26 +152,28 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -191,7 +189,6 @@ CONFIG_KMOD=y # # Block layer # -# CONFIG_LBD is not set # # IO Schedulers @@ -229,7 +226,6 @@ CONFIG_MMU=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set -CONFIG_TRAD_SIGNALS=y # # Networking @@ -293,6 +289,11 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -313,7 +314,6 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m # # Device Drivers @@ -324,7 +324,7 @@ CONFIG_IEEE80211_CRYPT_TKIP=m # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=y # # Connector - unified userspace <-> kernelspace linker @@ -397,7 +397,7 @@ CONFIG_SCSI_MULTI_LUN=y # SCSI Transport Attributes # # CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set +CONFIG_SCSI_FC_ATTRS=y CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_SAS_ATTRS is not set @@ -426,13 +426,7 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -499,6 +493,7 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_DM9000 is not set # # Tulip family network device support @@ -538,6 +533,7 @@ CONFIG_EEPRO100=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set @@ -559,7 +555,6 @@ CONFIG_EEPRO100=y # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set -# CONFIG_IPW2200 is not set # # Wan interfaces @@ -630,11 +625,6 @@ CONFIG_HW_CONSOLE=y # # Non-8250 serial port support # -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_VR41XX=y -CONFIG_SERIAL_VR41XX_CONSOLE=y -# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -650,7 +640,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set -# CONFIG_RTC_VR41XX is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -674,6 +663,12 @@ CONFIG_GPIO_VR41XX=y # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -770,6 +765,8 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices @@ -792,6 +789,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -877,11 +875,11 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=m CONFIG_INOTIFY=y @@ -914,6 +912,7 @@ CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_RELAYFS_FS=m +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1021,6 +1020,7 @@ CONFIG_NLS_ISO8859_1=m # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y diff --git a/arch/mips/configs/tb0229_defconfig b/arch/mips/configs/tb0229_defconfig index ce7b9ed4443..be99261d799 100644 --- a/arch/mips/configs/tb0229_defconfig +++ b/arch/mips/configs/tb0229_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:07:15 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:40:35 2006 # CONFIG_MIPS=y @@ -63,11 +63,12 @@ CONFIG_MACH_VR41XX=y # CONFIG_TOSHIBA_JMR3927 is not set # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set -# CONFIG_NEC_CMBVR4133 is not set # CONFIG_CASIO_E55 is not set # CONFIG_IBM_WORKPAD is not set +# CONFIG_NEC_CMBVR4133 is not set CONFIG_TANBAC_TB022X=y # CONFIG_TANBAC_TB0226 is not set +CONFIG_TANBAC_TB0287=y # CONFIG_VICTOR_MPC30X is not set # CONFIG_ZAO_CAPCELLA is not set CONFIG_PCI_VR41XX=y @@ -91,7 +92,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_MIPS64_R2 is not set # CONFIG_CPU_R3000 is not set # CONFIG_CPU_TX39XX is not set -CONFIG_CPU_VR41XX=y +# CONFIG_CPU_VR41XX is not set # CONFIG_CPU_R4300 is not set # CONFIG_CPU_R4X00 is not set # CONFIG_CPU_TX49XX is not set @@ -104,23 +105,18 @@ CONFIG_CPU_VR41XX=y # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_VR41XX=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y # # Kernel type # -CONFIG_32BIT=y +# CONFIG_32BIT is not set # CONFIG_64BIT is not set CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_MIPS_MT is not set -# CONFIG_CPU_ADVANCED is not set +CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y @@ -156,26 +152,28 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -191,7 +189,6 @@ CONFIG_KMOD=y # # Block layer # -# CONFIG_LBD is not set # # IO Schedulers @@ -229,7 +226,6 @@ CONFIG_MMU=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set -CONFIG_TRAD_SIGNALS=y # # Networking @@ -294,6 +290,11 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -314,7 +315,6 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m # # Device Drivers @@ -436,6 +436,7 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_DM9000 is not set # # Tulip family network device support @@ -480,6 +481,7 @@ CONFIG_R8169=y # CONFIG_R8169_NAPI is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set @@ -501,8 +503,6 @@ CONFIG_R8169=y # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set -# CONFIG_IPW_DEBUG is not set -CONFIG_IPW2200=m # # Wan interfaces @@ -583,11 +583,6 @@ CONFIG_HW_CONSOLE=y # # Non-8250 serial port support # -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_VR41XX=y -CONFIG_SERIAL_VR41XX_CONSOLE=y -# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -603,7 +598,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set -# CONFIG_RTC_VR41XX is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -613,7 +607,6 @@ CONFIG_TANBAC_TB0219=y # Ftape, the floppy tape device driver # # CONFIG_DRM is not set -CONFIG_GPIO_VR41XX=y # CONFIG_RAW_DRIVER is not set # @@ -627,6 +620,12 @@ CONFIG_GPIO_VR41XX=y # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -715,6 +714,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # may also be needed; see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices @@ -737,6 +737,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -840,6 +841,7 @@ CONFIG_XFS_QUOTA=y # CONFIG_XFS_SECURITY is not set CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=m CONFIG_INOTIFY=y @@ -879,6 +881,7 @@ CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_RELAYFS_FS=m +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -986,6 +989,7 @@ CONFIG_NLS_ISO8859_1=m # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig deleted file mode 100644 index 95344832d66..00000000000 --- a/arch/mips/configs/tb0287_defconfig +++ /dev/null @@ -1,1105 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc5-mm1 -# Tue Oct 25 00:20:22 2005 -# -CONFIG_MIPS=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SWAP_PREFETCH=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_EMBEDDED=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y - -# -# Machine selection -# -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set -# CONFIG_MIPS_COBALT is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set -# CONFIG_MIPS_ATLAS is not set -# CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set -# CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set -# CONFIG_MOMENCO_OCELOT_G is not set -# CONFIG_MIPS_XXS1500 is not set -# CONFIG_PNX8550_V2PCI is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_DDB5074 is not set -# CONFIG_DDB5476 is not set -# CONFIG_DDB5477 is not set -CONFIG_MACH_VR41XX=y -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_PTSWARM is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SNI_RM200_PCI is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set -# CONFIG_CASIO_E55 is not set -# CONFIG_IBM_WORKPAD is not set -# CONFIG_NEC_CMBVR4133 is not set -CONFIG_TANBAC_TB022X=y -# CONFIG_TANBAC_TB0226 is not set -CONFIG_TANBAC_TB0287=y -# CONFIG_VICTOR_MPC30X is not set -# CONFIG_ZAO_CAPCELLA is not set -CONFIG_PCI_VR41XX=y -# CONFIG_VRC4173 is not set -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_DMA_NEED_PCI_MAP_STATE=y -# CONFIG_CPU_BIG_ENDIAN is not set -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_IRQ_CPU=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 - -# -# CPU selection -# -# CONFIG_CPU_MIPS32_R1 is not set -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_TX39XX is not set -CONFIG_CPU_VR41XX=y -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y - -# -# Kernel type -# -CONFIG_32BIT=y -# CONFIG_64BIT is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PAGE_SIZE_16KB is not set -# CONFIG_PAGE_SIZE_64KB is not set -# CONFIG_MIPS_MT is not set -# CONFIG_CPU_ADVANCED is not set -CONFIG_CPU_HAS_SYNC=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set - -# -# Bus options (PCI, PCMCIA, EISA, ISA, TC) -# -CONFIG_HW_HAS_PCI=y -CONFIG_PCI=y -# CONFIG_PCI_LEGACY_PROC is not set -CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_TRAD_SIGNALS=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_ASK_IP_FIB_HASH=y -# CONFIG_IP_FIB_TRIE is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE=m -# CONFIG_NET_IPGRE_BROADCAST is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -CONFIG_TCP_CONG_ADVANCED=y - -# -# TCP congestion control -# -CONFIG_TCP_CONG_BIC=y -CONFIG_TCP_CONG_WESTWOOD=m -CONFIG_TCP_CONG_HTCP=m -# CONFIG_TCP_CONG_HSTCP is not set -# CONFIG_TCP_CONG_HYBLA is not set -# CONFIG_TCP_CONG_VEGAS is not set -# CONFIG_TCP_CONG_SCALABLE is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=m -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=m -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_IDEPCI_SHARE_IRQ is not set -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_GENERIC is not set -# CONFIG_BLK_DEV_OPTI621 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -# CONFIG_IDEDMA_PCI_AUTO is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -CONFIG_BLK_DEV_SIIMAGE=y -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set - -# -# SCSI Transport Layers -# -# CONFIG_SAS_CLASS is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set - -# -# IEEE 1394 (FireWire) support -# -CONFIG_IEEE1394=m - -# -# Subsystem Options -# -# CONFIG_IEEE1394_VERBOSEDEBUG is not set -# CONFIG_IEEE1394_OUI_DB is not set -CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y -CONFIG_IEEE1394_CONFIG_ROM_IP1394=y -# CONFIG_IEEE1394_EXPORT_FULL_API is not set - -# -# Device Drivers -# - -# -# Texas Instruments PCILynx requires I2C -# -CONFIG_IEEE1394_OHCI1394=m - -# -# Protocol Drivers -# -CONFIG_IEEE1394_VIDEO1394=m -CONFIG_IEEE1394_SBP2=m -# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set -CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_DV1394=m -CONFIG_IEEE1394_RAWIO=m -CONFIG_IEEE1394_CMP=m -CONFIG_IEEE1394_AMDTP=m - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -CONFIG_R8169=y -# CONFIG_R8169_NAPI is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set -# CONFIG_HOSTAP is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_KGDBOE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NETPOLL_RX is not set -# CONFIG_NETPOLL_TRAP is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_VR41XX=y -CONFIG_SERIAL_VR41XX_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_RTC_VR41XX is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_TANBAC_TB0219 is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set -CONFIG_GPIO_VR41XX=y -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y - -# -# Speakup console speech -# -# CONFIG_SPEAKUP is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB=m -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -# CONFIG_USB_DEVICEFS is not set -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -CONFIG_USB_EHCI_HCD=m -# CONFIG_USB_EHCI_SPLIT_ISO is not set -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=m -# CONFIG_USB_OHCI_BIG_ENDIAN is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=m -CONFIG_USB_HIDINPUT=y -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set -CONFIG_USB_MON=y - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_GOTEMP is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# SN Devices -# - -# -# EDAC - error detection and reporting (RAS) -# -# CONFIG_EDAC is not set - -# -# Distributed Lock Manager -# -# CONFIG_DLM is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISER4_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -CONFIG_XFS_FS=y -CONFIG_XFS_QUOTA=y -# CONFIG_XFS_SECURITY is not set -CONFIG_XFS_POSIX_ACL=y -# CONFIG_XFS_RT is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -CONFIG_ROMFS_FS=m -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_QUOTACTL=y -# CONFIG_DNOTIFY is not set -# CONFIG_AUTOFS_FS is not set -CONFIG_AUTOFS4_FS=y -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_ASFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_CRAMFS=m -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" - -# -# Security options -# -CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=m diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig index 02b2551023d..7132e296d40 100644 --- a/arch/mips/configs/workpad_defconfig +++ b/arch/mips/configs/workpad_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:07:17 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:40:36 2006 # CONFIG_MIPS=y @@ -63,9 +63,9 @@ CONFIG_MACH_VR41XX=y # CONFIG_TOSHIBA_JMR3927 is not set # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set -# CONFIG_NEC_CMBVR4133 is not set # CONFIG_CASIO_E55 is not set CONFIG_IBM_WORKPAD=y +# CONFIG_NEC_CMBVR4133 is not set # CONFIG_TANBAC_TB022X is not set # CONFIG_VICTOR_MPC30X is not set # CONFIG_ZAO_CAPCELLA is not set @@ -88,7 +88,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_MIPS64_R2 is not set # CONFIG_CPU_R3000 is not set # CONFIG_CPU_TX39XX is not set -CONFIG_CPU_VR41XX=y +# CONFIG_CPU_VR41XX is not set # CONFIG_CPU_R4300 is not set # CONFIG_CPU_R4X00 is not set # CONFIG_CPU_TX49XX is not set @@ -101,23 +101,18 @@ CONFIG_CPU_VR41XX=y # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_VR41XX=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y # # Kernel type # -CONFIG_32BIT=y +# CONFIG_32BIT is not set # CONFIG_64BIT is not set CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_MIPS_MT is not set -# CONFIG_CPU_ADVANCED is not set +CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y @@ -153,26 +148,28 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -188,7 +185,6 @@ CONFIG_KMOD=y # # Block layer # -# CONFIG_LBD is not set # # IO Schedulers @@ -234,7 +230,6 @@ CONFIG_PCMCIA_PROBE=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set -CONFIG_TRAD_SIGNALS=y # # Networking @@ -289,6 +284,11 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -309,7 +309,6 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m # # Device Drivers @@ -445,6 +444,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_SMC is not set +# CONFIG_DM9000 is not set # CONFIG_NET_VENDOR_RACAL is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set @@ -556,10 +556,6 @@ CONFIG_HW_CONSOLE=y # # Non-8250 serial port support # -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_VR41XX=y -CONFIG_SERIAL_VR41XX_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -588,7 +584,6 @@ CONFIG_WATCHDOG=y # CONFIG_WDT is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set -# CONFIG_RTC_VR41XX is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set @@ -602,7 +597,6 @@ CONFIG_WATCHDOG=y # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set -# CONFIG_GPIO_VR41XX is not set # CONFIG_RAW_DRIVER is not set # @@ -616,6 +610,12 @@ CONFIG_WATCHDOG=y # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -699,12 +699,12 @@ CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -737,6 +737,7 @@ CONFIG_SYSFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_RELAYFS_FS=m +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -798,6 +799,7 @@ CONFIG_MSDOS_PARTITION=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig index 468c2e443d7..67457850941 100644 --- a/arch/mips/configs/yosemite_defconfig +++ b/arch/mips/configs/yosemite_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:07:19 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:40:37 2006 # CONFIG_MIPS=y @@ -154,8 +154,6 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set @@ -164,19 +162,22 @@ CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -184,6 +185,7 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y @@ -295,7 +297,6 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m # # Device Drivers @@ -413,6 +414,7 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_DM9000 is not set # # Tulip family network device support @@ -452,8 +454,6 @@ CONFIG_TITAN_GE=y # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set -# CONFIG_IPW_DEBUG is not set -CONFIG_IPW2200=m # # Wan interfaces @@ -498,6 +498,7 @@ CONFIG_IPW2200=m CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -505,7 +506,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -541,6 +541,12 @@ CONFIG_GEN_RTC_X=y # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -615,7 +621,6 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -694,12 +699,13 @@ CONFIG_MSDOS_PARTITION=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y # CONFIG_MAGIC_SYSRQ is not set +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set @@ -707,6 +713,7 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" diff --git a/arch/mips/defconfig b/arch/mips/defconfig index 4f125e9e8e0..42d5cd7927c 100644 --- a/arch/mips/defconfig +++ b/arch/mips/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 01:05:49 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 15:39:51 2006 # CONFIG_MIPS=y @@ -158,27 +158,29 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -317,6 +319,28 @@ CONFIG_NETFILTER=y CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # # IP: Netfilter Configuration @@ -335,39 +359,23 @@ CONFIG_IP_NF_AMANDA=m CONFIG_IP_NF_PPTP=m CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m CONFIG_IP_NF_MATCH_MULTIPORT=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_DSCP=m CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -CONFIG_IP_NF_MATCH_DCCP=m -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_CONNBYTES=m CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_STRING=m +CONFIG_IP_NF_MATCH_POLICY=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_TARGET_NFQUEUE=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m @@ -384,13 +392,9 @@ CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CONNMARK=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m @@ -400,25 +404,20 @@ CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_FRAG=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_MULTIPORT=m CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_AHESP=m -CONFIG_IP6_NF_MATCH_LENGTH=m CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_POLICY=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_TARGET_REJECT=m -CONFIG_IP6_NF_TARGET_NFQUEUE=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m @@ -445,6 +444,11 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set CONFIG_NET_DIVERT=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -504,7 +508,6 @@ CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m # # Device Drivers @@ -641,6 +644,7 @@ CONFIG_CICADA_PHY=m # CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_DM9000 is not set CONFIG_SGISEEQ=y # @@ -786,6 +790,12 @@ CONFIG_MAX_RAW_DEVS=256 # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -892,6 +902,7 @@ CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set CONFIG_MINIX_FS=m # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -934,6 +945,7 @@ CONFIG_SYSFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_RELAYFS_FS=m +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1007,6 +1019,7 @@ CONFIG_MSDOS_PARTITION=y CONFIG_SGI_PARTITION=y # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # @@ -1062,6 +1075,7 @@ CONFIG_NLS_UTF8=m # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y -- cgit v1.2.3-18-g5258 From f24284adcdeae963aacf0c9b17979c875069cd80 Mon Sep 17 00:00:00 2001 From: "Hyok S. Choi" Date: Fri, 24 Feb 2006 21:37:50 +0000 Subject: [ARM] noMMU: block sys_fork in nommu mode The sys_fork is not supported in nommu mode. The other syscalls that is not supported in nommu mode are to be defined as cond_signal in kernel/sys_ni.c. Signed-off-by: Hyok S. Choi Signed-off-by: Russell King --- arch/arm/kernel/sys_arm.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c index a491de2d902..8170af47143 100644 --- a/arch/arm/kernel/sys_arm.c +++ b/arch/arm/kernel/sys_arm.c @@ -234,7 +234,12 @@ asmlinkage int sys_ipc(uint call, int first, int second, int third, */ asmlinkage int sys_fork(struct pt_regs *regs) { +#ifdef CONFIG_MMU return do_fork(SIGCHLD, regs->ARM_sp, regs, 0, NULL, NULL); +#else + /* can not support in nommu mode */ + return(-EINVAL); +#endif } /* Clone a task - this clones the calling program thread. -- cgit v1.2.3-18-g5258 From 0f44ba1d1e67201c0c58af26eb441fa7014c89ec Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 24 Feb 2006 21:04:56 +0000 Subject: [ARM] Move read of processor ID out of lookup_processor_type() Read the processor ID at boot, and save it in "processor_id" as we did before. Later, when we re-parse the CPU type in the setup.c code, re-use the value stored in "processor_id". This allows a cleaner work-around for noMMU devices without CP#15. Signed-off-by: Russell King --- arch/arm/kernel/head.S | 15 +++++++++------ arch/arm/kernel/setup.c | 4 ++-- 2 files changed, 11 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 1aca1775b28..571d6d58491 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -82,6 +82,7 @@ ENTRY(stext) msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | MODE_SVC @ ensure svc mode @ and irqs disabled + mrc p15, 0, r9, c0, c0 @ get processor id bl __lookup_processor_type @ r5=procinfo r9=cpuid movs r10, r5 @ invalid processor (r5=0)? beq __error_p @ yes, error 'p' @@ -156,6 +157,7 @@ ENTRY(secondary_startup) * as it has already been validated by the primary processor. */ msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | MODE_SVC + mrc p15, 0, r9, c0, c0 @ get processor id bl __lookup_processor_type movs r10, r5 @ invalid processor? moveq r0, #'p' @ yes, error 'p' @@ -450,19 +452,19 @@ __error: * (and therefore, we are not in the correct address space). We have to * calculate the offset. * + * r9 = cpuid * Returns: * r3, r4, r6 corrupted * r5 = proc_info pointer in physical address space - * r9 = cpuid + * r9 = cpuid (preserved) */ .type __lookup_processor_type, %function __lookup_processor_type: adr r3, 3f - ldmda r3, {r5, r6, r9} - sub r3, r3, r9 @ get offset between virt&phys + ldmda r3, {r5 - r7} + sub r3, r3, r7 @ get offset between virt&phys add r5, r5, r3 @ convert virt addresses to add r6, r6, r3 @ physical address space - mrc p15, 0, r9, c0, c0 @ get processor id 1: ldmia r5, {r3, r4} @ value, mask and r4, r4, r9 @ mask wanted bits teq r3, r4 @@ -477,10 +479,11 @@ __lookup_processor_type: * This provides a C-API version of the above function. */ ENTRY(lookup_processor_type) - stmfd sp!, {r4 - r6, r9, lr} + stmfd sp!, {r4 - r7, r9, lr} + mov r9, r0 bl __lookup_processor_type mov r0, r5 - ldmfd sp!, {r4 - r6, r9, pc} + ldmfd sp!, {r4 - r7, r9, pc} /* * Look in include/asm-arm/procinfo.h and arch/arm/kernel/arch.[ch] for diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 08974cbe982..b7cd280bfd6 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -278,7 +278,7 @@ int cpu_architecture(void) * These functions re-use the assembly code in head.S, which * already provide the required functionality. */ -extern struct proc_info_list *lookup_processor_type(void); +extern struct proc_info_list *lookup_processor_type(unsigned int); extern struct machine_desc *lookup_machine_type(unsigned int); static void __init setup_processor(void) @@ -290,7 +290,7 @@ static void __init setup_processor(void) * types. The linker builds this table for us from the * entries in arch/arm/mm/proc-*.S */ - list = lookup_processor_type(); + list = lookup_processor_type(processor_id); if (!list) { printk("CPU configuration botched (ID %08x), unable " "to continue.\n", processor_id); -- cgit v1.2.3-18-g5258 From 74945c8616a50074277e18641baaae7464006766 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 16 Mar 2006 14:44:36 +0000 Subject: [ARM] nommu: Move hardware page table definitions to pgtable-hwdef.h Move the hardware PMD and PTE page table definitions from pgtable.h into pgtable-hwdef.h, and include pgtable-hwdef.h as necessary. Signed-off-by: Russell King --- arch/arm/mach-sa1100/assabet.c | 1 + arch/arm/mm/proc-arm1020.S | 1 + arch/arm/mm/proc-arm1020e.S | 1 + arch/arm/mm/proc-arm1022.S | 1 + arch/arm/mm/proc-arm1026.S | 1 + arch/arm/mm/proc-arm6_7.S | 1 + arch/arm/mm/proc-arm720.S | 1 + arch/arm/mm/proc-arm920.S | 1 + arch/arm/mm/proc-arm922.S | 1 + arch/arm/mm/proc-arm925.S | 1 + arch/arm/mm/proc-arm926.S | 1 + arch/arm/mm/proc-sa110.S | 1 + arch/arm/mm/proc-sa1100.S | 1 + arch/arm/mm/proc-v6.S | 1 + arch/arm/mm/proc-xscale.S | 1 + 15 files changed, 15 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index a599bb0d4ab..c58f12ba7a9 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index 82ec954e45b..5f460d71725 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -29,6 +29,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index 7375fe930f7..3e5ea550883 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -29,6 +29,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S index 6ca639094d6..f778545d57a 100644 --- a/arch/arm/mm/proc-arm1022.S +++ b/arch/arm/mm/proc-arm1022.S @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S index 10317e4f55d..148c111fde7 100644 --- a/arch/arm/mm/proc-arm1026.S +++ b/arch/arm/mm/proc-arm1026.S @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S index 8e7e1e70ab0..540359b475d 100644 --- a/arch/arm/mm/proc-arm6_7.S +++ b/arch/arm/mm/proc-arm6_7.S @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index a13e0184d34..72b0819326d 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -34,6 +34,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index d1651389999..e57d3b8de4b 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S index 23b8ed97f4e..3170b37f82f 100644 --- a/arch/arm/mm/proc-arm922.S +++ b/arch/arm/mm/proc-arm922.S @@ -29,6 +29,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index ee95c52db51..eb78850adda 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -51,6 +51,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index 7d042dc20c4..23ad5027d90 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S index bd330c4075a..c916a6cae40 100644 --- a/arch/arm/mm/proc-sa110.S +++ b/arch/arm/mm/proc-sa110.S @@ -18,6 +18,7 @@ #include #include #include +#include #include #include diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index 91b89124c0d..41f21f2dd8f 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -23,6 +23,7 @@ #include #include #include +#include #include /* diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 92f3ca31b7b..9a7e7c096aa 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -14,6 +14,7 @@ #include #include #include +#include #include #include "proc-macros.S" diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index 2d3823ec315..3e7e6a8f410 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3-18-g5258 From 48fa14f7618fe89cac9b807b05b66df4b595fc7e Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 16 Mar 2006 14:52:33 +0000 Subject: [ARM] select TLS_REG_EMUL and NEEDS_SYSCALL_FOR_CMPXCHG Rather than having a growing dependency line, use select to set these configuration symbols. Signed-off-by: Russell King --- arch/arm/mm/Kconfig | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 3b79d0e2345..57a48d92ac4 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -266,12 +266,18 @@ config CPU_32v6K # This defines the compiler instruction set which depends on the machine type. config CPU_32v3 bool + select TLS_REG_EMUL if SMP + select NEEDS_SYSCALL_FOR_CMPXCHG if SMP config CPU_32v4 bool + select TLS_REG_EMUL if SMP + select NEEDS_SYSCALL_FOR_CMPXCHG if SMP config CPU_32v5 bool + select TLS_REG_EMUL if SMP + select NEEDS_SYSCALL_FOR_CMPXCHG if SMP config CPU_32v6 bool @@ -417,7 +423,6 @@ config CPU_BPREDICT_DISABLE config TLS_REG_EMUL bool - default y if SMP && (CPU_32v5 || CPU_32v4 || CPU_32v3) help An SMP system using a pre-ARMv6 processor (there are apparently a few prototypes like that in existence) and therefore access to @@ -436,7 +441,6 @@ config HAS_TLS_REG config NEEDS_SYSCALL_FOR_CMPXCHG bool - default y if SMP && (CPU_32v5 || CPU_32v4 || CPU_32v3) help SMP on a pre-ARMv6 processor? Well OK then. Forget about fast user space cmpxchg support. -- cgit v1.2.3-18-g5258 From f80658137fc8b789a71953adeca194a5a4747427 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 2 Mar 2006 22:41:59 +0000 Subject: [ARM] Move HZ definition into Kconfig Move the HZ definition into Kconfig, and set appropriate defaults for platforms. Remove mostly empty asm/arch/param.h include file. Signed-off-by: Russell King --- arch/arm/Kconfig | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 32ba00bd0a2..2c63228b4ab 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -434,6 +434,13 @@ config NO_IDLE_HZ Currently at least OMAP, PXA2xx and SA11x0 platforms are known to have accurate timekeeping with dynamic tick. +config HZ + int + default 128 if ARCH_L7200 + default 200 if ARCH_EBSA110 || ARCH_S3C2410 + default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER_HZ != 0 + default 100 + config AEABI bool "Use the ARM EABI to compile the kernel" help -- cgit v1.2.3-18-g5258 From 411ef7f4cf1684ca7977c7917fd841ea091c5b26 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 4 Mar 2006 10:37:07 +0000 Subject: [ARM] Remove asm/arch/irq.h asm/arch/irq.h used to be included from asm/irq.h, but was removed from the ARM kernel a long time ago. Consequently, the contents of asm/arch/irq.h (which mostly contain a definition for fixup_irq()) have not been used. Hence, remove asm/arch/irq.h. Some machine support files incorrectly included this file, making little or no use of the contents. Move the contents to a local include file, and remove those include statements as well. Signed-off-by: Russell King --- arch/arm/mach-lh7a40x/common.h | 1 + arch/arm/mach-lh7a40x/irq-kev7a400.c | 1 + arch/arm/mach-lh7a40x/irq-lh7a400.c | 2 +- arch/arm/mach-lh7a40x/irq-lh7a404.c | 3 ++- arch/arm/mach-lh7a40x/irq-lpd7a40x.c | 1 + arch/arm/mach-pxa/corgi.c | 1 - arch/arm/mach-pxa/poodle.c | 1 - arch/arm/mach-pxa/spitz.c | 1 - arch/arm/mach-pxa/tosa.c | 1 - 9 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-lh7a40x/common.h b/arch/arm/mach-lh7a40x/common.h index 578a52461fd..ea8de7e3ab1 100644 --- a/arch/arm/mach-lh7a40x/common.h +++ b/arch/arm/mach-lh7a40x/common.h @@ -12,5 +12,6 @@ extern struct sys_timer lh7a40x_timer; extern void lh7a400_init_irq (void); extern void lh7a404_init_irq (void); +extern void lh7a40x_init_board_irq (void); #define IRQ_DISPATCH(irq) desc_handle_irq((irq),(irq_desc + irq), regs) diff --git a/arch/arm/mach-lh7a40x/irq-kev7a400.c b/arch/arm/mach-lh7a40x/irq-kev7a400.c index 691bb09232a..8535764d89c 100644 --- a/arch/arm/mach-lh7a40x/irq-kev7a400.c +++ b/arch/arm/mach-lh7a40x/irq-kev7a400.c @@ -16,6 +16,7 @@ #include #include +#include "common.h" /* KEV7a400 CPLD IRQ handling */ diff --git a/arch/arm/mach-lh7a40x/irq-lh7a400.c b/arch/arm/mach-lh7a40x/irq-lh7a400.c index f334d81c2cd..f9fdefef6d6 100644 --- a/arch/arm/mach-lh7a40x/irq-lh7a400.c +++ b/arch/arm/mach-lh7a40x/irq-lh7a400.c @@ -16,9 +16,9 @@ #include #include #include -#include #include +#include "common.h" /* CPU IRQ handling */ diff --git a/arch/arm/mach-lh7a40x/irq-lh7a404.c b/arch/arm/mach-lh7a40x/irq-lh7a404.c index 122fadabc97..e902e3d87da 100644 --- a/arch/arm/mach-lh7a40x/irq-lh7a404.c +++ b/arch/arm/mach-lh7a40x/irq-lh7a404.c @@ -16,9 +16,10 @@ #include #include #include -#include #include +#include "common.h" + #define USE_PRIORITIES /* See Documentation/arm/Sharp-LH/VectoredInterruptController for more diff --git a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c index 6262d449120..dcb4e17b941 100644 --- a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c +++ b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c @@ -19,6 +19,7 @@ #include #include +#include "common.h" static void lh7a40x_ack_cpld_irq (u32 irq) { diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 7ffd2de8f2f..68923b1d2b6 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -32,7 +32,6 @@ #include #include -#include #include #include #include diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 911e6ff5a9b..b45560a8f6c 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -29,7 +29,6 @@ #include #include -#include #include #include #include diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index c094d99ebf5..30ec317bbb9 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -33,7 +33,6 @@ #include #include -#include #include #include #include diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index d168286ed47..66ec71756d0 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -34,7 +34,6 @@ #include #include -#include #include #include -- cgit v1.2.3-18-g5258 From bfe65704812f82751470106ea50aeb7e7d37cc3f Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 4 Mar 2006 11:01:53 +0000 Subject: [ARM] Fix HZ definition for OMAP without 32K timer Unfortunately, OMAP platforms without the 32K timer left HZ set to an empty value. Fix this by making the dependency on OMAP_32K_TIMER rather than OMAP_32K_TIMER_HZ. Signed-off-by: Russell King --- arch/arm/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 2c63228b4ab..6e9e8cedd72 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -438,7 +438,7 @@ config HZ int default 128 if ARCH_L7200 default 200 if ARCH_EBSA110 || ARCH_S3C2410 - default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER_HZ != 0 + default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER default 100 config AEABI -- cgit v1.2.3-18-g5258 From f78f10436806660f39440a729acbaf03e3a01023 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 4 Mar 2006 11:04:12 +0000 Subject: [ARM] Remove unnecessary asm/hardware.h includes asm/hardware.h is not required for the majority of processor support files, ioremap support, mm initialisation, acorn IO support, nor the debug code (which picks up its machine specific includes via debug-macros.S) Signed-off-by: Russell King --- arch/arm/kernel/debug.S | 1 - arch/arm/lib/io-acorn.S | 1 - arch/arm/mm/init.c | 1 - arch/arm/mm/ioremap.c | 1 - arch/arm/mm/proc-arm1020.S | 1 - arch/arm/mm/proc-arm1020e.S | 1 - arch/arm/mm/proc-arm720.S | 1 - arch/arm/mm/proc-arm920.S | 1 - arch/arm/mm/proc-arm922.S | 1 - arch/arm/mm/proc-arm925.S | 1 - arch/arm/mm/proc-arm926.S | 1 - arch/arm/mm/proc-xscale.S | 1 - 12 files changed, 12 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S index caaa919ab47..da280bae3d0 100644 --- a/arch/arm/kernel/debug.S +++ b/arch/arm/kernel/debug.S @@ -11,7 +11,6 @@ */ #include #include -#include .text diff --git a/arch/arm/lib/io-acorn.S b/arch/arm/lib/io-acorn.S index b153523631c..1b197ea7aab 100644 --- a/arch/arm/lib/io-acorn.S +++ b/arch/arm/lib/io-acorn.S @@ -12,7 +12,6 @@ */ #include #include -#include .text .align diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 8b276ee38ac..efda9710ee6 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -19,7 +19,6 @@ #include #include -#include #include #include diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index da9b3597411..25e0ca3e598 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -26,7 +26,6 @@ #include #include -#include #include #include diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index 82ec954e45b..3aa80094012 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -32,7 +32,6 @@ #include #include #include -#include /* * This is the maximum size of an area which will be invalidated diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index 7375fe930f7..767d158f211 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -32,7 +32,6 @@ #include #include #include -#include /* * This is the maximum size of an area which will be invalidated diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index a13e0184d34..471286fdf78 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -37,7 +37,6 @@ #include #include #include -#include /* * Function: arm720_proc_init (void) diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index d1651389999..950d3b664c1 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -30,7 +30,6 @@ #include #include #include -#include #include #include #include "proc-macros.S" diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S index 23b8ed97f4e..410b032faa3 100644 --- a/arch/arm/mm/proc-arm922.S +++ b/arch/arm/mm/proc-arm922.S @@ -31,7 +31,6 @@ #include #include #include -#include #include #include #include "proc-macros.S" diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index ee95c52db51..6dd2be7cd05 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -53,7 +53,6 @@ #include #include #include -#include #include #include #include "proc-macros.S" diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index 7d042dc20c4..022e8684204 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -30,7 +30,6 @@ #include #include #include -#include #include #include #include "proc-macros.S" diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index 2d3823ec315..b50f87a0ee7 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -24,7 +24,6 @@ #include #include #include -#include #include #include #include -- cgit v1.2.3-18-g5258 From 5d25ac038a317d454a4321cba955f756400835a5 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 15 Mar 2006 12:33:43 +0000 Subject: [ARM] Move IRQ enable after coprocessor number decode Allow the individual coprocessor handlers to decide when to enable interrupts, rather than unconditionally enabling them. Signed-off-by: Russell King --- arch/arm/kernel/entry-armv.S | 2 +- arch/arm/vfp/entry.S | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index ec48d70c6d8..355914ffb19 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -484,7 +484,6 @@ call_fpe: movcss r7, r5, lsr #(TIF_USING_IWMMXT + 1) bcs iwmmxt_task_enable #endif - enable_irq add pc, pc, r8, lsr #6 mov r0, r0 @@ -511,6 +510,7 @@ call_fpe: mov pc, lr @ CP#15 (Control) do_fpe: + enable_irq ldr r4, .LCfp add r10, r10, #TI_FPSTATE @ r10 = workspace ldr pc, [r4] @ Call FP module USR entry point diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S index 6f17187ab32..9ab1abfbe7a 100644 --- a/arch/arm/vfp/entry.S +++ b/arch/arm/vfp/entry.S @@ -22,6 +22,7 @@ .globl do_vfp do_vfp: + enable_irq ldr r4, .LCvfp add r10, r10, #TI_VFPSTATE @ r10 = workspace ldr pc, [r4] @ call VFP entry point -- cgit v1.2.3-18-g5258 From 548153663bbf33ca7c244a6bbddd82c26a17c331 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 15 Mar 2006 15:43:04 +0000 Subject: [ARM] Rename chipdata to 'base' and make it an iomem pointer In all current use cases, "chipdata" is used to store an iomem address. Mark it with __iomem, and rename it to 'base'. Leave the accessor macros alone. Signed-off-by: Russell King --- arch/arm/common/locomo.c | 42 ++++++++++++++++++++--------------------- arch/arm/mach-at91rm9200/gpio.c | 4 ++-- 2 files changed, 23 insertions(+), 23 deletions(-) (limited to 'arch') diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index 23609400a8e..787e0d027f0 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -60,7 +60,7 @@ struct locomo { unsigned long phys; unsigned int irq; spinlock_t lock; - void *base; + void __iomem *base; }; struct locomo_dev_info { @@ -162,7 +162,7 @@ static void locomo_handler(unsigned int irq, struct irqdesc *desc, { int req, i; struct irqdesc *d; - void *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chipdata(irq); /* Acknowledge the parent IRQ */ desc->chip->ack(irq); @@ -189,7 +189,7 @@ static void locomo_ack_irq(unsigned int irq) static void locomo_mask_irq(unsigned int irq) { - void *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chipdata(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_ICR); r &= ~(0x0010 << (irq - LOCOMO_IRQ_START)); @@ -198,7 +198,7 @@ static void locomo_mask_irq(unsigned int irq) static void locomo_unmask_irq(unsigned int irq) { - void *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chipdata(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_ICR); r |= (0x0010 << (irq - LOCOMO_IRQ_START)); @@ -215,7 +215,7 @@ static void locomo_key_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs) { struct irqdesc *d; - void *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chipdata(irq); if (locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC) & 0x0001) { d = irq_desc + LOCOMO_IRQ_KEY_START; @@ -225,7 +225,7 @@ static void locomo_key_handler(unsigned int irq, struct irqdesc *desc, static void locomo_key_ack_irq(unsigned int irq) { - void *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chipdata(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC); r &= ~(0x0100 << (irq - LOCOMO_IRQ_KEY_START)); @@ -234,7 +234,7 @@ static void locomo_key_ack_irq(unsigned int irq) static void locomo_key_mask_irq(unsigned int irq) { - void *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chipdata(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC); r &= ~(0x0010 << (irq - LOCOMO_IRQ_KEY_START)); @@ -243,7 +243,7 @@ static void locomo_key_mask_irq(unsigned int irq) static void locomo_key_unmask_irq(unsigned int irq) { - void *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chipdata(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC); r |= (0x0010 << (irq - LOCOMO_IRQ_KEY_START)); @@ -261,7 +261,7 @@ static void locomo_gpio_handler(unsigned int irq, struct irqdesc *desc, { int req, i; struct irqdesc *d; - void *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chipdata(irq); req = locomo_readl(mapbase + LOCOMO_GIR) & locomo_readl(mapbase + LOCOMO_GPD) & @@ -280,7 +280,7 @@ static void locomo_gpio_handler(unsigned int irq, struct irqdesc *desc, static void locomo_gpio_ack_irq(unsigned int irq) { - void *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chipdata(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_GWE); r |= (0x0001 << (irq - LOCOMO_IRQ_GPIO_START)); @@ -297,7 +297,7 @@ static void locomo_gpio_ack_irq(unsigned int irq) static void locomo_gpio_mask_irq(unsigned int irq) { - void *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chipdata(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_GIE); r &= ~(0x0001 << (irq - LOCOMO_IRQ_GPIO_START)); @@ -306,7 +306,7 @@ static void locomo_gpio_mask_irq(unsigned int irq) static void locomo_gpio_unmask_irq(unsigned int irq) { - void *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chipdata(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_GIE); r |= (0x0001 << (irq - LOCOMO_IRQ_GPIO_START)); @@ -323,7 +323,7 @@ static void locomo_lt_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs) { struct irqdesc *d; - void *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chipdata(irq); if (locomo_readl(mapbase + LOCOMO_LTINT) & 0x0001) { d = irq_desc + LOCOMO_IRQ_LT_START; @@ -333,7 +333,7 @@ static void locomo_lt_handler(unsigned int irq, struct irqdesc *desc, static void locomo_lt_ack_irq(unsigned int irq) { - void *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chipdata(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_LTINT); r &= ~(0x0100 << (irq - LOCOMO_IRQ_LT_START)); @@ -342,7 +342,7 @@ static void locomo_lt_ack_irq(unsigned int irq) static void locomo_lt_mask_irq(unsigned int irq) { - void *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chipdata(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_LTINT); r &= ~(0x0010 << (irq - LOCOMO_IRQ_LT_START)); @@ -351,7 +351,7 @@ static void locomo_lt_mask_irq(unsigned int irq) static void locomo_lt_unmask_irq(unsigned int irq) { - void *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chipdata(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_LTINT); r |= (0x0010 << (irq - LOCOMO_IRQ_LT_START)); @@ -369,7 +369,7 @@ static void locomo_spi_handler(unsigned int irq, struct irqdesc *desc, { int req, i; struct irqdesc *d; - void *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chipdata(irq); req = locomo_readl(mapbase + LOCOMO_SPIIR) & 0x000F; if (req) { @@ -386,7 +386,7 @@ static void locomo_spi_handler(unsigned int irq, struct irqdesc *desc, static void locomo_spi_ack_irq(unsigned int irq) { - void *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chipdata(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_SPIWE); r |= (0x0001 << (irq - LOCOMO_IRQ_SPI_START)); @@ -403,7 +403,7 @@ static void locomo_spi_ack_irq(unsigned int irq) static void locomo_spi_mask_irq(unsigned int irq) { - void *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chipdata(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_SPIIE); r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START)); @@ -412,7 +412,7 @@ static void locomo_spi_mask_irq(unsigned int irq) static void locomo_spi_unmask_irq(unsigned int irq) { - void *mapbase = get_irq_chipdata(irq); + void __iomem *mapbase = get_irq_chipdata(irq); unsigned int r; r = locomo_readl(mapbase + LOCOMO_SPIIE); r |= (0x0001 << (irq - LOCOMO_IRQ_SPI_START)); @@ -428,7 +428,7 @@ static struct irqchip locomo_spi_chip = { static void locomo_setup_irq(struct locomo *lchip) { int irq; - void *irqbase = lchip->base; + void __iomem *irqbase = lchip->base; /* * Install handler for IRQ_LOCOMO_HW. diff --git a/arch/arm/mach-at91rm9200/gpio.c b/arch/arm/mach-at91rm9200/gpio.c index 0e396feec46..5ab46274e1a 100644 --- a/arch/arm/mach-at91rm9200/gpio.c +++ b/arch/arm/mach-at91rm9200/gpio.c @@ -261,7 +261,7 @@ static void gpio_irq_handler(unsigned irq, struct irqdesc *desc, struct pt_regs void __iomem *pio; u32 isr; - pio = (void __force __iomem *) desc->chipdata; + pio = desc->base; /* temporarily mask (level sensitive) parent IRQ */ desc->chip->ack(irq); @@ -312,7 +312,7 @@ void __init at91_gpio_irq_setup(unsigned banks) __raw_writel(~0, controller + PIO_IDR); set_irq_data(id, (void *) pin); - set_irq_chipdata(id, (void __force *) controller); + set_irq_chipdata(id, controller); for (i = 0; i < 32; i++, pin++) { set_irq_chip(pin, &gpio_irqchip); -- cgit v1.2.3-18-g5258 From 824b5b5e59472c89bc508afa5c453547c91ed53b Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 15 Mar 2006 15:44:29 +0000 Subject: [ARM] Adapt vic.c to allow for multiple VICs in a system. Some SoCs have multiple VIC devices. Adapt the generic vic code to allow multiple implementations to be handled. Signed-off-by: Russell King --- arch/arm/common/vic.c | 49 +++++++++++++++++++++++------------------- arch/arm/mach-versatile/core.c | 2 +- 2 files changed, 28 insertions(+), 23 deletions(-) (limited to 'arch') diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index a45ed1687a5..a19bc4a6196 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -22,22 +22,21 @@ #include #include -#include #include #include -static void __iomem *vic_base; - static void vic_mask_irq(unsigned int irq) { - irq -= IRQ_VIC_START; - writel(1 << irq, vic_base + VIC_INT_ENABLE_CLEAR); + void __iomem *base = get_irq_chipdata(irq); + irq &= 31; + writel(1 << irq, base + VIC_INT_ENABLE_CLEAR); } static void vic_unmask_irq(unsigned int irq) { - irq -= IRQ_VIC_START; - writel(1 << irq, vic_base + VIC_INT_ENABLE); + void __iomem *base = get_irq_chipdata(irq); + irq &= 31; + writel(1 << irq, base + VIC_INT_ENABLE); } static struct irqchip vic_chip = { @@ -46,43 +45,49 @@ static struct irqchip vic_chip = { .unmask = vic_unmask_irq, }; -void __init vic_init(void __iomem *base, u32 vic_sources) +/** + * vic_init - initialise a vectored interrupt controller + * @base: iomem base address + * @irq_start: starting interrupt number, must be muliple of 32 + * @vic_sources: bitmask of interrupt sources to allow + */ +void __init vic_init(void __iomem *base, unsigned int irq_start, + u32 vic_sources) { unsigned int i; - vic_base = base; - /* Disable all interrupts initially. */ - writel(0, vic_base + VIC_INT_SELECT); - writel(0, vic_base + VIC_INT_ENABLE); - writel(~0, vic_base + VIC_INT_ENABLE_CLEAR); - writel(0, vic_base + VIC_IRQ_STATUS); - writel(0, vic_base + VIC_ITCR); - writel(~0, vic_base + VIC_INT_SOFT_CLEAR); + writel(0, base + VIC_INT_SELECT); + writel(0, base + VIC_INT_ENABLE); + writel(~0, base + VIC_INT_ENABLE_CLEAR); + writel(0, base + VIC_IRQ_STATUS); + writel(0, base + VIC_ITCR); + writel(~0, base + VIC_INT_SOFT_CLEAR); /* * Make sure we clear all existing interrupts */ - writel(0, vic_base + VIC_VECT_ADDR); + writel(0, base + VIC_VECT_ADDR); for (i = 0; i < 19; i++) { unsigned int value; - value = readl(vic_base + VIC_VECT_ADDR); - writel(value, vic_base + VIC_VECT_ADDR); + value = readl(base + VIC_VECT_ADDR); + writel(value, base + VIC_VECT_ADDR); } for (i = 0; i < 16; i++) { - void __iomem *reg = vic_base + VIC_VECT_CNTL0 + (i * 4); + void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4); writel(VIC_VECT_CNTL_ENABLE | i, reg); } - writel(32, vic_base + VIC_DEF_VECT_ADDR); + writel(32, base + VIC_DEF_VECT_ADDR); for (i = 0; i < 32; i++) { - unsigned int irq = IRQ_VIC_START + i; + unsigned int irq = irq_start + i; set_irq_chip(irq, &vic_chip); + set_irq_chipdata(irq, base); if (vic_sources & (1 << i)) { set_irq_handler(irq, do_level_IRQ); diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 9ebbe808b41..799697d32de 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -112,7 +112,7 @@ void __init versatile_init_irq(void) { unsigned int i; - vic_init(VA_VIC_BASE, ~(1 << 31)); + vic_init(VA_VIC_BASE, IRQ_VIC_START, ~(1 << 31)); set_irq_handler(IRQ_VICSOURCE31, sic_handle_irq); enable_irq(IRQ_VICSOURCE31); -- cgit v1.2.3-18-g5258 From 97d654f8eb4b8fbb6e1afef076429a4235a3a3ad Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 15 Mar 2006 15:54:37 +0000 Subject: [ARM] Convert SA1111 to use clock architecture Signed-off-by: Russell King --- arch/arm/common/sa1111.c | 41 +++++++------ arch/arm/mach-pxa/Makefile | 2 +- arch/arm/mach-pxa/clock.c | 124 +++++++++++++++++++++++++++++++++++++++ arch/arm/mach-sa1100/Makefile | 2 +- arch/arm/mach-sa1100/clock.c | 132 ++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 278 insertions(+), 23 deletions(-) create mode 100644 arch/arm/mach-pxa/clock.c create mode 100644 arch/arm/mach-sa1100/clock.c (limited to 'arch') diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 93352f6097c..5ba1ee04234 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include @@ -36,10 +37,6 @@ #include -#ifdef CONFIG_ARCH_PXA -#include -#endif - extern void __init sa1110_mb_enable(void); /* @@ -51,6 +48,7 @@ extern void __init sa1110_mb_enable(void); */ struct sa1111 { struct device *dev; + struct clk *clk; unsigned long phys; int irq; spinlock_t lock; @@ -451,19 +449,7 @@ static void sa1111_wake(struct sa1111 *sachip) spin_lock_irqsave(&sachip->lock, flags); -#ifdef CONFIG_ARCH_SA1100 - /* - * First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111: - * (SA-1110 Developer's Manual, section 9.1.2.1) - */ - GAFR |= GPIO_32_768kHz; - GPDR |= GPIO_32_768kHz; - TUCR = TUCR_3_6864MHz; -#elif CONFIG_ARCH_PXA - pxa_gpio_mode(GPIO11_3_6MHz_MD); -#else -#error missing clock setup -#endif + clk_enable(sachip->clk); /* * Turn VCO on, and disable PLL Bypass. @@ -641,6 +627,12 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq) memset(sachip, 0, sizeof(struct sa1111)); + sachip->clk = clk_get(me, "GPIO27_CLK"); + if (!sachip->clk) { + ret = PTR_ERR(sachip->clk); + goto err_free; + } + spin_lock_init(&sachip->lock); sachip->dev = me; @@ -656,7 +648,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq) sachip->base = ioremap(mem->start, PAGE_SIZE * 2); if (!sachip->base) { ret = -ENOMEM; - goto out; + goto err_clkput; } /* @@ -666,7 +658,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq) if ((id & SKID_ID_MASK) != SKID_SA1111_ID) { printk(KERN_DEBUG "SA1111 not detected: ID = %08lx\n", id); ret = -ENODEV; - goto unmap; + goto err_unmap; } printk(KERN_INFO "SA1111 Microprocessor Companion Chip: " @@ -726,9 +718,11 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq) return 0; - unmap: + err_unmap: iounmap(sachip->base); - out: + err_clkput: + clk_put(sachip->clk); + err_free: kfree(sachip); return ret; } @@ -751,6 +745,8 @@ static void __sa1111_remove(struct sa1111 *sachip) sa1111_writel(0, irqbase + SA1111_WAKEEN0); sa1111_writel(0, irqbase + SA1111_WAKEEN1); + clk_disable(sachip->clk); + if (sachip->irq != NO_IRQ) { set_irq_chained_handler(sachip->irq, NULL); set_irq_data(sachip->irq, NULL); @@ -759,6 +755,7 @@ static void __sa1111_remove(struct sa1111 *sachip) } iounmap(sachip->base); + clk_put(sachip->clk); kfree(sachip); } @@ -857,6 +854,8 @@ static int sa1111_suspend(struct platform_device *dev, pm_message_t state) sa1111_writel(0, sachip->base + SA1111_SKPWM0); sa1111_writel(0, sachip->base + SA1111_SKPWM1); + clk_disable(sachip->clk); + spin_unlock_irqrestore(&sachip->lock, flags); return 0; diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 32526a0a6f8..382644401a4 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -3,7 +3,7 @@ # # Common support (must be linked before board specific support) -obj-y += generic.o irq.o dma.o time.o +obj-y += clock.o generic.o irq.o dma.o time.o obj-$(CONFIG_PXA25x) += pxa25x.o obj-$(CONFIG_PXA27x) += pxa27x.o diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c new file mode 100644 index 00000000000..8f7c90a0593 --- /dev/null +++ b/arch/arm/mach-pxa/clock.c @@ -0,0 +1,124 @@ +/* + * linux/arch/arm/mach-sa1100/clock.c + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +struct clk { + struct list_head node; + unsigned long rate; + struct module *owner; + const char *name; + unsigned int enabled; + void (*enable)(void); + void (*disable)(void); +}; + +static LIST_HEAD(clocks); +static DECLARE_MUTEX(clocks_sem); +static DEFINE_SPINLOCK(clocks_lock); + +struct clk *clk_get(struct device *dev, const char *id) +{ + struct clk *p, *clk = ERR_PTR(-ENOENT); + + down(&clocks_sem); + list_for_each_entry(p, &clocks, node) { + if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) { + clk = p; + break; + } + } + up(&clocks_sem); + + return clk; +} +EXPORT_SYMBOL(clk_get); + +void clk_put(struct clk *clk) +{ + module_put(clk->owner); +} +EXPORT_SYMBOL(clk_put); + +int clk_enable(struct clk *clk) +{ + unsigned long flags; + + spin_lock_irqsave(&clocks_lock, flags); + if (clk->enabled++ == 0) + clk->enable(); + spin_unlock_irqrestore(&clocks_lock, flags); + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ + unsigned long flags; + + WARN_ON(clk->enabled == 0); + + spin_lock_irqsave(&clocks_lock, flags); + if (--clk->enabled == 0) + clk->disable(); + spin_unlock_irqrestore(&clocks_lock, flags); +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + return clk->rate; +} +EXPORT_SYMBOL(clk_get_rate); + + +static void clk_gpio27_enable(void) +{ + pxa_gpio_mode(GPIO11_3_6MHz_MD); +} + +static void clk_gpio27_disable(void) +{ +} + +static struct clk clk_gpio27 = { + .name = "GPIO27_CLK", + .rate = 3686400, + .enable = clk_gpio27_enable, + .disable = clk_gpio27_disable, +}; + +int clk_register(struct clk *clk) +{ + down(&clocks_sem); + list_add(&clk->node, &clocks); + up(&clocks_sem); + return 0; +} +EXPORT_SYMBOL(clk_register); + +void clk_unregister(struct clk *clk) +{ + down(&clocks_sem); + list_del(&clk->node); + up(&clocks_sem); +} +EXPORT_SYMBOL(clk_unregister); + +static int __init clk_init(void) +{ + clk_register(&clk_gpio27); + return 0; +} +arch_initcall(clk_init); diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile index e4a4a3e8aa8..e27f15042a2 100644 --- a/arch/arm/mach-sa1100/Makefile +++ b/arch/arm/mach-sa1100/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := generic.o irq.o dma.o time.o +obj-y := clock.o generic.o irq.o dma.o time.o #nmi-oopser.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c new file mode 100644 index 00000000000..b1e8fd766c1 --- /dev/null +++ b/arch/arm/mach-sa1100/clock.c @@ -0,0 +1,132 @@ +/* + * linux/arch/arm/mach-sa1100/clock.c + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +struct clk { + struct list_head node; + unsigned long rate; + struct module *owner; + const char *name; + unsigned int enabled; + void (*enable)(void); + void (*disable)(void); +}; + +static LIST_HEAD(clocks); +static DECLARE_MUTEX(clocks_sem); +static DEFINE_SPINLOCK(clocks_lock); + +struct clk *clk_get(struct device *dev, const char *id) +{ + struct clk *p, *clk = ERR_PTR(-ENOENT); + + down(&clocks_sem); + list_for_each_entry(p, &clocks, node) { + if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) { + clk = p; + break; + } + } + up(&clocks_sem); + + return clk; +} +EXPORT_SYMBOL(clk_get); + +void clk_put(struct clk *clk) +{ + module_put(clk->owner); +} +EXPORT_SYMBOL(clk_put); + +int clk_enable(struct clk *clk) +{ + unsigned long flags; + + spin_lock_irqsave(&clocks_lock, flags); + if (clk->enabled++ == 0) + clk->enable(); + spin_unlock_irqrestore(&clocks_lock, flags); + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ + unsigned long flags; + + WARN_ON(clk->enabled == 0); + + spin_lock_irqsave(&clocks_lock, flags); + if (--clk->enabled == 0) + clk->disable(); + spin_unlock_irqrestore(&clocks_lock, flags); +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + return clk->rate; +} +EXPORT_SYMBOL(clk_get_rate); + + +static void clk_gpio27_enable(void) +{ + /* + * First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111: + * (SA-1110 Developer's Manual, section 9.1.2.1) + */ + GAFR |= GPIO_32_768kHz; + GPDR |= GPIO_32_768kHz; + TUCR = TUCR_3_6864MHz; +} + +static void clk_gpio27_disable(void) +{ + TUCR = 0; + GPDR &= ~GPIO_32_768kHz; + GAFR &= ~GPIO_32_768kHz; +} + +static struct clk clk_gpio27 = { + .name = "GPIO27_CLK", + .rate = 3686400, + .enable = clk_gpio27_enable, + .disable = clk_gpio27_disable, +}; + +int clk_register(struct clk *clk) +{ + down(&clocks_sem); + list_add(&clk->node, &clocks); + up(&clocks_sem); + return 0; +} +EXPORT_SYMBOL(clk_register); + +void clk_unregister(struct clk *clk) +{ + down(&clocks_sem); + list_del(&clk->node); + up(&clocks_sem); +} +EXPORT_SYMBOL(clk_unregister); + +static int __init clk_init(void) +{ + clk_register(&clk_gpio27); + return 0; +} +arch_initcall(clk_init); -- cgit v1.2.3-18-g5258 From a61ea9326d9ba94bcdc21f36bb74aa203657c58f Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Mon, 20 Mar 2006 17:10:01 +0000 Subject: [ARM] 3261/2: remove phys_ram from struct machine_desc (part 3) Patch from Nicolas Pitre This field is redundent since it must be equal to PHYS_OFFSET anyway. There is no reference to it anymore so remove it at last. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/kernel/head.S | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 1aca1775b28..84277fe818a 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -28,10 +28,9 @@ #define PROCINFO_INITFUNC 12 #define MACHINFO_TYPE 0 -#define MACHINFO_PHYSRAM 4 -#define MACHINFO_PHYSIO 8 -#define MACHINFO_PGOFFIO 12 -#define MACHINFO_NAME 16 +#define MACHINFO_PHYSIO 4 +#define MACHINFO_PGOFFIO 8 +#define MACHINFO_NAME 12 #define KERNEL_RAM_ADDR (PAGE_OFFSET + TEXT_OFFSET) -- cgit v1.2.3-18-g5258 From 110d322b29c08d8cf1dba599fd45ad2b9752a4bb Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 20 Mar 2006 17:10:02 +0000 Subject: [ARM] 3327/1: S3C2410 - add osiris machine support Patch from Ben Dooks Support for Simtec IM2440D20 CPU modules (Osiris) Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/Kconfig | 7 + arch/arm/mach-s3c2410/Makefile | 1 + arch/arm/mach-s3c2410/mach-osiris.c | 290 ++++++++++++++++++++++++++++++++++++ 3 files changed, 298 insertions(+) create mode 100644 arch/arm/mach-s3c2410/mach-osiris.c (limited to 'arch') diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index 0b9d7ca49ec..ed07c4149d8 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -9,6 +9,13 @@ config MACH_ANUBIS Say Y gere if you are using the Simtec Electronics ANUBIS development system +config MACH_OSIRIS + bool "Simtec IM2440D20 (OSIRIS) module" + select CPU_S3C2440 + help + Say Y here if you are using the Simtec IM2440D20 module, also + known as the Osiris. + config ARCH_BAST bool "Simtec Electronics BAST (EB2410ITX)" select CPU_S3C2410 diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index 1217bf00309..1b3b476e563 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -38,6 +38,7 @@ obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o # machine specific support obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o +obj-$(CONFIG_MACH_OSIRIS) += mach-osiris.o obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o obj-$(CONFIG_ARCH_H1940) += mach-h1940.o obj-$(CONFIG_MACH_N30) += mach-n30.o diff --git a/arch/arm/mach-s3c2410/mach-osiris.c b/arch/arm/mach-s3c2410/mach-osiris.c new file mode 100644 index 00000000000..72083e645e7 --- /dev/null +++ b/arch/arm/mach-s3c2410/mach-osiris.c @@ -0,0 +1,290 @@ +/* linux/arch/arm/mach-s3c2410/mach-osiris.c + * + * Copyright (c) 2005 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "clock.h" +#include "devs.h" +#include "cpu.h" + +/* onboard perihpheral map */ + +static struct map_desc osiris_iodesc[] __initdata = { + /* ISA IO areas (may be over-written later) */ + + { + .virtual = (u32)S3C24XX_VA_ISA_BYTE, + .pfn = __phys_to_pfn(S3C2410_CS5), + .length = SZ_16M, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_WORD, + .pfn = __phys_to_pfn(S3C2410_CS5), + .length = SZ_16M, + .type = MT_DEVICE, + }, + + /* CPLD control registers */ + + { + .virtual = (u32)OSIRIS_VA_CTRL1, + .pfn = __phys_to_pfn(OSIRIS_PA_CTRL1), + .length = SZ_16K, + .type = MT_DEVICE + }, { + .virtual = (u32)OSIRIS_VA_CTRL2, + .pfn = __phys_to_pfn(OSIRIS_PA_CTRL2), + .length = SZ_16K, + .type = MT_DEVICE + }, +}; + +#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK +#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB +#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE + +static struct s3c24xx_uart_clksrc osiris_serial_clocks[] = { + [0] = { + .name = "uclk", + .divisor = 1, + .min_baud = 0, + .max_baud = 0, + }, + [1] = { + .name = "pclk", + .divisor = 1, + .min_baud = 0, + .max_baud = 0. + } +}; + + +static struct s3c2410_uartcfg osiris_uartcfgs[] = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + .clocks = osiris_serial_clocks, + .clocks_size = ARRAY_SIZE(osiris_serial_clocks) + }, + [1] = { + .hwport = 2, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + .clocks = osiris_serial_clocks, + .clocks_size = ARRAY_SIZE(osiris_serial_clocks) + }, +}; + +/* NAND Flash on Osiris board */ + +static int external_map[] = { 2 }; +static int chip0_map[] = { 0 }; +static int chip1_map[] = { 1 }; + +struct mtd_partition osiris_default_nand_part[] = { + [0] = { + .name = "Boot Agent", + .size = SZ_16K, + .offset = 0 + }, + [1] = { + .name = "/boot", + .size = SZ_4M - SZ_16K, + .offset = SZ_16K, + }, + [2] = { + .name = "user1", + .offset = SZ_4M, + .size = SZ_32M - SZ_4M, + }, + [3] = { + .name = "user2", + .offset = SZ_32M, + .size = MTDPART_SIZ_FULL, + } +}; + +/* the Osiris has 3 selectable slots for nand-flash, the two + * on-board chip areas, as well as the external slot. + * + * Note, there is no current hot-plug support for the External + * socket. +*/ + +static struct s3c2410_nand_set osiris_nand_sets[] = { + [1] = { + .name = "External", + .nr_chips = 1, + .nr_map = external_map, + .nr_partitions = ARRAY_SIZE(osiris_default_nand_part), + .partitions = osiris_default_nand_part + }, + [0] = { + .name = "chip0", + .nr_chips = 1, + .nr_map = chip0_map, + .nr_partitions = ARRAY_SIZE(osiris_default_nand_part), + .partitions = osiris_default_nand_part + }, + [2] = { + .name = "chip1", + .nr_chips = 1, + .nr_map = chip1_map, + .nr_partitions = ARRAY_SIZE(osiris_default_nand_part), + .partitions = osiris_default_nand_part + }, +}; + +static void osiris_nand_select(struct s3c2410_nand_set *set, int slot) +{ + unsigned int tmp; + + slot = set->nr_map[slot] & 3; + + pr_debug("osiris_nand: selecting slot %d (set %p,%p)\n", + slot, set, set->nr_map); + + tmp = __raw_readb(OSIRIS_VA_CTRL1); + tmp &= ~OSIRIS_CTRL1_NANDSEL; + tmp |= slot; + + pr_debug("osiris_nand: ctrl1 now %02x\n", tmp); + + __raw_writeb(tmp, OSIRIS_VA_CTRL1); +} + +static struct s3c2410_platform_nand osiris_nand_info = { + .tacls = 25, + .twrph0 = 60, + .twrph1 = 60, + .nr_sets = ARRAY_SIZE(osiris_nand_sets), + .sets = osiris_nand_sets, + .select_chip = osiris_nand_select, +}; + +/* PCMCIA control and configuration */ + +static struct resource osiris_pcmcia_resource[] = { + [0] = { + .start = 0x0f000000, + .end = 0x0f100000, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 0x0c000000, + .end = 0x0c100000, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device osiris_pcmcia = { + .name = "osiris-pcmcia", + .id = -1, + .num_resources = ARRAY_SIZE(osiris_pcmcia_resource), + .resource = osiris_pcmcia_resource, +}; + +/* Standard Osiris devices */ + +static struct platform_device *osiris_devices[] __initdata = { + &s3c_device_i2c, + &s3c_device_nand, + &osiris_pcmcia, +}; + +static struct clk *osiris_clocks[] = { + &s3c24xx_dclk0, + &s3c24xx_dclk1, + &s3c24xx_clkout0, + &s3c24xx_clkout1, + &s3c24xx_uclk, +}; + +static struct s3c24xx_board osiris_board __initdata = { + .devices = osiris_devices, + .devices_count = ARRAY_SIZE(osiris_devices), + .clocks = osiris_clocks, + .clocks_count = ARRAY_SIZE(osiris_clocks) +}; + +void __init osiris_map_io(void) +{ + /* initialise the clocks */ + + s3c24xx_dclk0.parent = NULL; + s3c24xx_dclk0.rate = 12*1000*1000; + + s3c24xx_dclk1.parent = NULL; + s3c24xx_dclk1.rate = 24*1000*1000; + + s3c24xx_clkout0.parent = &s3c24xx_dclk0; + s3c24xx_clkout1.parent = &s3c24xx_dclk1; + + s3c24xx_uclk.parent = &s3c24xx_clkout1; + + s3c_device_nand.dev.platform_data = &osiris_nand_info; + + s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc)); + s3c24xx_init_clocks(0); + s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs)); + s3c24xx_set_board(&osiris_board); + + /* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */ + __raw_writel(__raw_readl(S3C2410_BWSCON) | S3C2410_BWSCON_ST1 | S3C2410_BWSCON_ST2 | S3C2410_BWSCON_ST3 | S3C2410_BWSCON_ST4 | S3C2410_BWSCON_ST5, S3C2410_BWSCON); + + /* write-protect line to the NAND */ + s3c2410_gpio_setpin(S3C2410_GPA0, 1); +} + +MACHINE_START(OSIRIS, "Simtec-OSIRIS") + /* Maintainer: Ben Dooks */ + .phys_ram = S3C2410_SDRAM_PA, + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, + .map_io = osiris_map_io, + .init_irq = s3c24xx_init_irq, + .timer = &s3c24xx_timer, +MACHINE_END -- cgit v1.2.3-18-g5258 From 766636cc3630ae3b9827e7b4b1f566572963f1ef Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 20 Mar 2006 17:10:03 +0000 Subject: [ARM] 3329/1: S3C24XX - fix time for osiris machine Patch from Ben Dooks Add selection for timer code for the Simtec Osiris Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/time.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c2410/time.c b/arch/arm/mach-s3c2410/time.c index 10a2976aefd..9d7b799ea4a 100644 --- a/arch/arm/mach-s3c2410/time.c +++ b/arch/arm/mach-s3c2410/time.c @@ -142,6 +142,12 @@ static struct irqaction s3c2410_timer_irq = { .handler = s3c2410_timer_interrupt, }; +#define use_tclk1_12() ( \ + machine_is_bast() || \ + machine_is_vr1000() || \ + machine_is_anubis() || \ + machine_is_osiris() ) + /* * Set up timer interrupt, and return the current time in seconds. * @@ -165,7 +171,7 @@ static void s3c2410_timer_setup (void) /* configure the system for whichever machine is in use */ - if (machine_is_bast() || machine_is_vr1000() || machine_is_anubis()) { + if (use_tclk1_12()) { /* timer is at 12MHz, scaler is 1 */ timer_usec_ticks = timer_mask_usec_ticks(1, 12000000); tcnt = 12000000 / HZ; -- cgit v1.2.3-18-g5258 From 8e40a2f91c6e73726a75381e4438478eb5964cb7 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 20 Mar 2006 17:10:04 +0000 Subject: [ARM] 3330/1: S3C24XX - move UPLL to main clock Patch from Ben Dooks Move the UPLL clock registration to the central clock file, and add an enable method Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/clock.c | 38 ++++++++++++++++++++++++++++++++++- arch/arm/mach-s3c2410/s3c2440-clock.c | 19 +----------------- 2 files changed, 38 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c index 08489efdaf0..aaada9e3d67 100644 --- a/arch/arm/mach-s3c2410/clock.c +++ b/arch/arm/mach-s3c2410/clock.c @@ -38,6 +38,7 @@ #include #include #include +#include #include #include @@ -200,6 +201,28 @@ EXPORT_SYMBOL(clk_round_rate); EXPORT_SYMBOL(clk_set_rate); EXPORT_SYMBOL(clk_get_parent); +/* base clock enable */ + +static int s3c24xx_upll_enable(struct clk *clk, int enable) +{ + unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW); + unsigned long orig = clkslow; + + if (enable) + clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF; + else + clkslow |= S3C2410_CLKSLOW_UCLK_OFF; + + __raw_writel(clkslow, S3C2410_CLKSLOW); + + /* if we started the UPLL, then allow to settle */ + + if (enable && !(orig & S3C2410_CLKSLOW_UCLK_OFF)) + udelay(200); + + return 0; +} + /* base clocks */ static struct clk clk_xtal = { @@ -210,6 +233,14 @@ static struct clk clk_xtal = { .ctrlbit = 0, }; +static struct clk clk_upll = { + .name = "upll", + .id = -1, + .parent = NULL, + .enable = s3c24xx_upll_enable, + .ctrlbit = 0, +}; + static struct clk clk_f = { .name = "fclk", .id = -1, @@ -262,7 +293,7 @@ struct clk s3c24xx_uclk = { }; -/* clock definitions */ +/* standard clock definitions */ static struct clk init_clocks[] = { { @@ -396,6 +427,7 @@ int __init s3c24xx_setup_clocks(unsigned long xtal, unsigned long hclk, unsigned long pclk) { + unsigned long upllcon = __raw_readl(S3C2410_UPLLCON); unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW); struct clk *clkp = init_clocks; int ptr; @@ -406,6 +438,7 @@ int __init s3c24xx_setup_clocks(unsigned long xtal, /* initialise the main system clocks */ clk_xtal.rate = xtal; + clk_upll.rate = s3c2410_get_pll(upllcon, xtal); clk_h.rate = hclk; clk_p.rate = pclk; @@ -439,6 +472,9 @@ int __init s3c24xx_setup_clocks(unsigned long xtal, if (s3c24xx_register_clock(&clk_xtal) < 0) printk(KERN_ERR "failed to register master xtal\n"); + if (s3c24xx_register_clock(&clk_upll) < 0) + printk(KERN_ERR "failed to register upll clock\n"); + if (s3c24xx_register_clock(&clk_f) < 0) printk(KERN_ERR "failed to register cpu fclk\n"); diff --git a/arch/arm/mach-s3c2410/s3c2440-clock.c b/arch/arm/mach-s3c2410/s3c2440-clock.c index b557a2be8a0..2d0fa03a257 100644 --- a/arch/arm/mach-s3c2410/s3c2440-clock.c +++ b/arch/arm/mach-s3c2410/s3c2440-clock.c @@ -45,11 +45,6 @@ /* S3C2440 extended clock support */ -static struct clk s3c2440_clk_upll = { - .name = "upll", - .id = -1, -}; - static struct clk s3c2440_clk_cam = { .name = "camif", .id = -1, @@ -66,22 +61,11 @@ static struct clk s3c2440_clk_ac97 = { static int s3c2440_clk_add(struct sys_device *sysdev) { - unsigned long upllcon = __raw_readl(S3C2410_UPLLCON); unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); struct clk *clk_h; struct clk *clk_p; - struct clk *clk_xtal; - - clk_xtal = clk_get(NULL, "xtal"); - if (IS_ERR(clk_xtal)) { - printk(KERN_ERR "S3C2440: Failed to get clk_xtal\n"); - return -EINVAL; - } - - s3c2440_clk_upll.rate = s3c2410_get_pll(upllcon, clk_xtal->rate); - printk("S3C2440: Clock Support, UPLL %ld.%03ld MHz, DVS %s\n", - print_mhz(s3c2440_clk_upll.rate), + printk("S3C2440: Clock Support, DVS %s\n", (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off"); clk_p = clk_get(NULL, "pclk"); @@ -97,7 +81,6 @@ static int s3c2440_clk_add(struct sys_device *sysdev) s3c24xx_register_clock(&s3c2440_clk_ac97); s3c24xx_register_clock(&s3c2440_clk_cam); - s3c24xx_register_clock(&s3c2440_clk_upll); clk_disable(&s3c2440_clk_ac97); clk_disable(&s3c2440_clk_cam); -- cgit v1.2.3-18-g5258 From d3468daab82d5195fe85322235896797d5581720 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 20 Mar 2006 17:10:04 +0000 Subject: [ARM] 3331/1: S3C24XX - add clk_set_parent() to clock code Patch from Ben Dooks Add clk_set_parent() call to clock code Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/clock.c | 18 ++++++++++++++++++ arch/arm/mach-s3c2410/clock.h | 2 ++ 2 files changed, 20 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c index aaada9e3d67..773b7aec3e9 100644 --- a/arch/arm/mach-s3c2410/clock.c +++ b/arch/arm/mach-s3c2410/clock.c @@ -192,6 +192,23 @@ struct clk *clk_get_parent(struct clk *clk) return clk->parent; } +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + int ret = 0; + + if (IS_ERR(clk)) + return -EINVAL; + + mutex_lock(&clocks_mutex); + + if (clk->set_parent) + ret = (clk->set_parent)(clk, parent); + + mutex_unlock(&clocks_mutex); + + return ret; +} + EXPORT_SYMBOL(clk_get); EXPORT_SYMBOL(clk_put); EXPORT_SYMBOL(clk_enable); @@ -200,6 +217,7 @@ EXPORT_SYMBOL(clk_get_rate); EXPORT_SYMBOL(clk_round_rate); EXPORT_SYMBOL(clk_set_rate); EXPORT_SYMBOL(clk_get_parent); +EXPORT_SYMBOL(clk_set_parent); /* base clock enable */ diff --git a/arch/arm/mach-s3c2410/clock.h b/arch/arm/mach-s3c2410/clock.h index eb5c95d1e7f..c4f36f00649 100644 --- a/arch/arm/mach-s3c2410/clock.h +++ b/arch/arm/mach-s3c2410/clock.h @@ -19,7 +19,9 @@ struct clk { int usage; unsigned long rate; unsigned long ctrlbit; + int (*enable)(struct clk *, int enable); + int (*set_parent)(struct clk *c, struct clk *parent); }; /* other clocks which may be registered by board support */ -- cgit v1.2.3-18-g5258 From 3fc3e1c0640887f883c28330e9d35145d23b2696 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 20 Mar 2006 17:10:07 +0000 Subject: [ARM] 3333/1: S3C2XX - add dclk and clkout clock support Patch from Ben Dooks Add enable and set_parent calls for the dclk and clkout clocks. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/clock.c | 94 ++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 93 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c index 773b7aec3e9..e205a6316b0 100644 --- a/arch/arm/mach-s3c2410/clock.c +++ b/arch/arm/mach-s3c2410/clock.c @@ -45,6 +45,7 @@ #include #include +#include #include "clock.h" #include "cpu.h" @@ -285,24 +286,115 @@ static struct clk clk_p = { /* clocks that could be registered by external code */ +static int s3c24xx_dclk_enable(struct clk *clk, int enable) +{ + unsigned long dclkcon = __raw_readl(S3C2410_DCLKCON); + + if (enable) + dclkcon |= clk->ctrlbit; + else + dclkcon &= ~clk->ctrlbit; + + __raw_writel(dclkcon, S3C2410_DCLKCON); + + return 0; +} + +static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent) +{ + unsigned long dclkcon; + unsigned int uclk; + + if (parent == &clk_upll) + uclk = 1; + else if (parent == &clk_p) + uclk = 0; + else + return -EINVAL; + + clk->parent = parent; + + dclkcon = __raw_readl(S3C2410_DCLKCON); + + if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) { + if (uclk) + dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK; + else + dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK; + } else { + if (uclk) + dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK; + else + dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK; + } + + __raw_writel(dclkcon, S3C2410_DCLKCON); + + return 0; +} + + +static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent) +{ + unsigned long mask; + unsigned long source; + + /* calculate the MISCCR setting for the clock */ + + if (parent == &clk_xtal) + source = S3C2410_MISCCR_CLK0_MPLL; + else if (parent == &clk_upll) + source = S3C2410_MISCCR_CLK0_UPLL; + else if (parent == &clk_f) + source = S3C2410_MISCCR_CLK0_FCLK; + else if (parent == &clk_p) + source = S3C2410_MISCCR_CLK0_PCLK; + else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0) + source = S3C2410_MISCCR_CLK0_DCLK0; + else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1) + source = S3C2410_MISCCR_CLK0_DCLK0; + else + return -EINVAL; + + if (clk == &s3c24xx_dclk0) + mask = S3C2410_MISCCR_CLK0_MASK; + else { + source <<= 4; + mask = S3C2410_MISCCR_CLK1_MASK; + } + + s3c2410_modify_misccr(mask, source); + return 0; +} + +/* external clock definitions */ + struct clk s3c24xx_dclk0 = { .name = "dclk0", .id = -1, + .ctrlbit = S3C2410_DCLKCON_DCLK0EN, + .enable = s3c24xx_dclk_enable, + .set_parent = s3c24xx_dclk_setparent, }; struct clk s3c24xx_dclk1 = { .name = "dclk1", .id = -1, + .ctrlbit = S3C2410_DCLKCON_DCLK0EN, + .enable = s3c24xx_dclk_enable, + .set_parent = s3c24xx_dclk_setparent, }; struct clk s3c24xx_clkout0 = { .name = "clkout0", .id = -1, + .set_parent = s3c24xx_clkout_setparent, }; struct clk s3c24xx_clkout1 = { .name = "clkout1", .id = -1, + .set_parent = s3c24xx_clkout_setparent, }; struct clk s3c24xx_uclk = { @@ -423,7 +515,7 @@ int s3c24xx_register_clock(struct clk *clk) /* if this is a standard clock, set the usage state */ - if (clk->ctrlbit) { + if (clk->ctrlbit && clk->enable == s3c24xx_clkcon_enable) { unsigned long clkcon = __raw_readl(S3C2410_CLKCON); clk->usage = (clkcon & clk->ctrlbit) ? 1 : 0; -- cgit v1.2.3-18-g5258 From 0328ad23cfd8a0501f44a1b83e49d5b0e47e2b3c Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Mon, 20 Mar 2006 17:10:08 +0000 Subject: [ARM] 3334/1: Add support for IXDP28x5 platforms Patch from Deepak Saxena This patch adds support for Intel's IXDP28x5 platform. This is just and IXDP2801 with a new CPU rev but the bootloader has been updated to reflect a new machine ID so we just build support for it by default when we build IXDP2801. Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- arch/arm/mach-ixp2000/Kconfig | 9 +++++++-- arch/arm/mach-ixp2000/ixdp2x01.c | 20 ++++++++++++++++++-- 2 files changed, 25 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-ixp2000/Kconfig b/arch/arm/mach-ixp2000/Kconfig index ecb58d83478..86f53f8ccbf 100644 --- a/arch/arm/mach-ixp2000/Kconfig +++ b/arch/arm/mach-ixp2000/Kconfig @@ -43,12 +43,17 @@ config ARCH_IXDP2401 this platform, see . config ARCH_IXDP2801 - bool "Support Intel IXDP2801" + bool "Support Intel IXDP2801 and IXDP28x5" help Say 'Y' here if you want your kernel to support the Intel - IXDP2801 reference platform. For more information on + IXDP2801/2805/2855 reference platforms. For more information on this platform, see . +config MACH_IXDP28X5 + bool + depends on ARCH_IXDP2801 + default y + config ARCH_IXDP2X01 bool depends on ARCH_IXDP2401 || ARCH_IXDP2801 diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c index 150519fb38e..f9d4968c1d6 100644 --- a/arch/arm/mach-ixp2000/ixdp2x01.c +++ b/arch/arm/mach-ixp2000/ixdp2x01.c @@ -284,7 +284,7 @@ static int ixdp2x01_pci_setup(int nr, struct pci_sys_data *sys) { sys->mem_offset = 0xe0000000; - if (machine_is_ixdp2801()) + if (machine_is_ixdp2801() || machine_is_ixdp28x5()) sys->mem_offset -= ((*IXP2000_PCI_ADDR_EXT & 0xE000) << 16); return ixp2000_pci_setup(nr, sys); @@ -300,7 +300,8 @@ struct hw_pci ixdp2x01_pci __initdata = { int __init ixdp2x01_pci_init(void) { - if (machine_is_ixdp2401() || machine_is_ixdp2801()) + if (machine_is_ixdp2401() || machine_is_ixdp2801() ||\ + machine_is_ixdp28x5()) pci_common_init(&ixdp2x01_pci); return 0; @@ -400,6 +401,21 @@ MACHINE_START(IXDP2801, "Intel IXDP2801 Development Platform") .timer = &ixdp2x01_timer, .init_machine = ixdp2x01_init_machine, MACHINE_END + +/* + * IXDP28x5 is basically an IXDP2801 with a different CPU but Intel + * changed the machine ID in the bootloader + */ +MACHINE_START(IXDP28X5, "Intel IXDP2805/2855 Development Platform") + /* Maintainer: MontaVista Software, Inc. */ + .phys_io = IXP2000_UART_PHYS_BASE, + .io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = ixdp2x01_map_io, + .init_irq = ixdp2x01_init_irq, + .timer = &ixdp2x01_timer, + .init_machine = ixdp2x01_init_machine, +MACHINE_END #endif -- cgit v1.2.3-18-g5258 From 6d4518d76f9612d580f9423cc0c3364a06b69588 Mon Sep 17 00:00:00 2001 From: Peter Teichmann Date: Mon, 20 Mar 2006 17:10:09 +0000 Subject: [ARM] 3346/1: Fix udelay() for HZ values different from 100 Patch from Peter Teichmann Currently, if the kernels HZ value is greater than 100, delays with the udelay function are too short. This can cause trouble for instance with the zd1201 usb wlan driver. This patch suggests a solution that keeps the overhead small and maintains (hopefully) sufficient resolution. Signed-off-by: Peter Teichmann Signed-off-by: Russell King --- arch/arm/lib/delay.S | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/lib/delay.S b/arch/arm/lib/delay.S index b3fb475b412..9183b06c0e2 100644 --- a/arch/arm/lib/delay.S +++ b/arch/arm/lib/delay.S @@ -9,28 +9,32 @@ */ #include #include +#include .text .LC0: .word loops_per_jiffy +.LC1: .word (2199023*HZ)>>11 /* - * 0 <= r0 <= 2000 + * r0 <= 2000 + * lpj <= 0x01ffffff (max. 3355 bogomips) + * HZ <= 1000 */ + ENTRY(__udelay) - mov r2, #0x6800 - orr r2, r2, #0x00db + ldr r2, .LC1 mul r0, r2, r0 -ENTRY(__const_udelay) @ 0 <= r0 <= 0x01ffffff +ENTRY(__const_udelay) @ 0 <= r0 <= 0x7fffff06 ldr r2, .LC0 - ldr r2, [r2] @ max = 0x0fffffff - mov r0, r0, lsr #11 @ max = 0x00003fff - mov r2, r2, lsr #11 @ max = 0x0003ffff + ldr r2, [r2] @ max = 0x01ffffff + mov r0, r0, lsr #14 @ max = 0x0001ffff + mov r2, r2, lsr #10 @ max = 0x00007fff mul r0, r2, r0 @ max = 2^32-1 movs r0, r0, lsr #6 RETINSTR(moveq,pc,lr) /* - * loops = (r0 * 0x10c6 * 100 * loops_per_jiffy) / 2^32 + * loops = r0 * HZ * loops_per_jiffy / 1000000 * * Oh, if only we had a cycle counter... */ -- cgit v1.2.3-18-g5258 From 73deb7dc05b4cf968e506e7b18345bc65bcbc0f3 Mon Sep 17 00:00:00 2001 From: Alessandro Zummo Date: Mon, 20 Mar 2006 17:10:12 +0000 Subject: [ARM] 3368/1: ixp4xx: set gpio direction in ixp4xx_config_irq Patch from Alessandro Zummo ixp4xx_config_irq did not configure the gpio line as an input. As an added bonus, the irq2gpio array has been converted from int to char. Signed-off-by: Alessandro Zummo Signed-off-by: Russell King --- arch/arm/mach-ixp4xx/common.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index fbadf3021b9..a0888e160e3 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -91,7 +91,7 @@ static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type); /* * IRQ -> GPIO mapping table */ -static int irq2gpio[32] = { +static char irq2gpio[32] = { -1, -1, -1, -1, -1, -1, 0, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, 2, 3, 4, 5, 6, @@ -153,6 +153,9 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type) /* Set the new style */ *int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE)); + /* Configure the line as an input */ + gpio_line_config(line, IXP4XX_GPIO_IN); + return 0; } -- cgit v1.2.3-18-g5258 From e7736d47a11a771ba87314be563b2cb6b8d11d14 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 20 Mar 2006 17:10:13 +0000 Subject: [ARM] 3369/1: ep93xx: add core cirrus ep93xx support Patch from Lennert Buytenhek This patch adds support for the Cirrus ep93xx series of CPUs. The ep93xx is an ARM920T based CPU with two VICs, PL010 based UARTs, IrDA, MaverickCrunch floating point coprocessor, between 24 and 64 GPIOs, ethernet, OHCI USB and, depending on the model, pcmcia, raster engine, graphics accelerator, IDE controller and a bunch of other stuff. This patch adds the core ep93xx support code, and support for the Glomation GESBC-9312-sx and the Technologic Systems TS-72xx SBCs. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- arch/arm/Kconfig | 9 ++ arch/arm/Makefile | 1 + arch/arm/mach-ep93xx/Kconfig | 21 +++++ arch/arm/mach-ep93xx/Makefile | 10 +++ arch/arm/mach-ep93xx/Makefile.boot | 2 + arch/arm/mach-ep93xx/core.c | 173 +++++++++++++++++++++++++++++++++++++ arch/arm/mach-ep93xx/gesbc9312.c | 40 +++++++++ arch/arm/mach-ep93xx/ts72xx.c | 118 +++++++++++++++++++++++++ arch/arm/mm/Kconfig | 2 +- 9 files changed, 375 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-ep93xx/Kconfig create mode 100644 arch/arm/mach-ep93xx/Makefile create mode 100644 arch/arm/mach-ep93xx/Makefile.boot create mode 100644 arch/arm/mach-ep93xx/core.c create mode 100644 arch/arm/mach-ep93xx/gesbc9312.c create mode 100644 arch/arm/mach-ep93xx/ts72xx.c (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 6e9e8cedd72..0dd24ebdf6a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -108,6 +108,13 @@ config ARCH_EBSA110 Ethernet interface, two PCMCIA sockets, two serial ports and a parallel port. +config ARCH_EP93XX + bool "EP93xx-based" + select ARM_AMBA + select ARM_VIC + help + This enables support for the Cirrus EP93xx series of CPUs. + config ARCH_FOOTBRIDGE bool "FootBridge" select FOOTBRIDGE @@ -250,6 +257,8 @@ endchoice source "arch/arm/mach-clps711x/Kconfig" +source "arch/arm/mach-ep93xx/Kconfig" + source "arch/arm/mach-footbridge/Kconfig" source "arch/arm/mach-integrator/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index fbfc14a56b9..b5b1e408751 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -105,6 +105,7 @@ endif machine-$(CONFIG_ARCH_AAEC2000) := aaec2000 machine-$(CONFIG_ARCH_REALVIEW) := realview machine-$(CONFIG_ARCH_AT91RM9200) := at91rm9200 + machine-$(CONFIG_ARCH_EP93XX) := ep93xx ifeq ($(CONFIG_ARCH_EBSA110),y) # This is what happens if you forget the IOCS16 line. diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig new file mode 100644 index 00000000000..cec5a21ca4e --- /dev/null +++ b/arch/arm/mach-ep93xx/Kconfig @@ -0,0 +1,21 @@ +if ARCH_EP93XX + +menu "Cirrus EP93xx Implementation Options" + +comment "EP93xx Platforms" + +config MACH_GESBC9312 + bool "Support Glomation GESBC-9312-sx" + help + Say 'Y' here if you want your kernel to support the Glomation + GESBC-9312-sx board. + +config MACH_TS72XX + bool "Support Technologic Systems TS-72xx SBC" + help + Say 'Y' here if you want your kernel to support the + Technologic Systems TS-72xx board. + +endmenu + +endif diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile new file mode 100644 index 00000000000..5393af989e9 --- /dev/null +++ b/arch/arm/mach-ep93xx/Makefile @@ -0,0 +1,10 @@ +# +# Makefile for the linux kernel. +# +obj-y := core.o +obj-m := +obj-n := +obj- := + +obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o +obj-$(CONFIG_MACH_TS72XX) += ts72xx.o diff --git a/arch/arm/mach-ep93xx/Makefile.boot b/arch/arm/mach-ep93xx/Makefile.boot new file mode 100644 index 00000000000..d5561ad15ba --- /dev/null +++ b/arch/arm/mach-ep93xx/Makefile.boot @@ -0,0 +1,2 @@ + zreladdr-y := 0x00008000 +params_phys-y := 0x00000100 diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c new file mode 100644 index 00000000000..f831f74dc8c --- /dev/null +++ b/arch/arm/mach-ep93xx/core.c @@ -0,0 +1,173 @@ +/* + * arch/arm/mach-ep93xx/core.c + * Core routines for Cirrus EP93xx chips. + * + * Copyright (C) 2006 Lennert Buytenhek + * + * Thanks go to Michael Burian and Ray Lehtiniemi for their key + * role in the ep93xx linux community. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include + + +/************************************************************************* + * Static I/O mappings that are needed for all EP93xx platforms + *************************************************************************/ +static struct map_desc ep93xx_io_desc[] __initdata = { + { + .virtual = EP93XX_AHB_VIRT_BASE, + .pfn = __phys_to_pfn(EP93XX_AHB_PHYS_BASE), + .length = EP93XX_AHB_SIZE, + .type = MT_DEVICE, + }, { + .virtual = EP93XX_APB_VIRT_BASE, + .pfn = __phys_to_pfn(EP93XX_APB_PHYS_BASE), + .length = EP93XX_APB_SIZE, + .type = MT_DEVICE, + }, +}; + +void __init ep93xx_map_io(void) +{ + iotable_init(ep93xx_io_desc, ARRAY_SIZE(ep93xx_io_desc)); +} + + +/************************************************************************* + * Timer handling for EP93xx + ************************************************************************* + * The ep93xx has four internal timers. Timers 1, 2 (both 16 bit) and + * 3 (32 bit) count down at 508 kHz, are self-reloading, and can generate + * an interrupt on underflow. Timer 4 (40 bit) counts down at 983.04 kHz, + * is free-running, and can't generate interrupts. + * + * The 508 kHz timers are ideal for use for the timer interrupt, as the + * most common values of HZ divide 508 kHz nicely. We pick one of the 16 + * bit timers (timer 1) since we don't need more than 16 bits of reload + * value as long as HZ >= 8. + * + * The higher clock rate of timer 4 makes it a better choice than the + * other timers for use in gettimeoffset(), while the fact that it can't + * generate interrupts means we don't have to worry about not being able + * to use this timer for something else. We also use timer 4 for keeping + * track of lost jiffies. + */ +static unsigned int last_jiffy_time; + +#define TIMER4_TICKS_PER_JIFFY ((CLOCK_TICK_RATE + (HZ/2)) / HZ) + +static int ep93xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + write_seqlock(&xtime_lock); + + __raw_writel(1, EP93XX_TIMER1_CLEAR); + while (__raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time + >= TIMER4_TICKS_PER_JIFFY) { + last_jiffy_time += TIMER4_TICKS_PER_JIFFY; + timer_tick(regs); + } + + write_sequnlock(&xtime_lock); + + return IRQ_HANDLED; +} + +static struct irqaction ep93xx_timer_irq = { + .name = "ep93xx timer", + .flags = SA_INTERRUPT | SA_TIMER, + .handler = ep93xx_timer_interrupt, +}; + +static void __init ep93xx_timer_init(void) +{ + /* Enable periodic HZ timer. */ + __raw_writel(0x48, EP93XX_TIMER1_CONTROL); + __raw_writel((508000 / HZ) - 1, EP93XX_TIMER1_LOAD); + __raw_writel(0xc8, EP93XX_TIMER1_CONTROL); + + /* Enable lost jiffy timer. */ + __raw_writel(0x100, EP93XX_TIMER4_VALUE_HIGH); + + setup_irq(IRQ_EP93XX_TIMER1, &ep93xx_timer_irq); +} + +static unsigned long ep93xx_gettimeoffset(void) +{ + int offset; + + offset = __raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time; + + /* Calculate (1000000 / 983040) * offset. */ + return offset + (53 * offset / 3072); +} + +struct sys_timer ep93xx_timer = { + .init = ep93xx_timer_init, + .offset = ep93xx_gettimeoffset, +}; + + +/************************************************************************* + * EP93xx IRQ handling + *************************************************************************/ +void __init ep93xx_init_irq(void) +{ + vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK); + vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK); +} + + +/************************************************************************* + * EP93xx peripheral handling + *************************************************************************/ +void __init ep93xx_init_devices(void) +{ + unsigned int v; + + /* + * Disallow access to MaverickCrunch initially. + */ + v = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG); + v &= ~EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE; + __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); + __raw_writel(v, EP93XX_SYSCON_DEVICE_CONFIG); +} diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c new file mode 100644 index 00000000000..d18fcb1a2f1 --- /dev/null +++ b/arch/arm/mach-ep93xx/gesbc9312.c @@ -0,0 +1,40 @@ +/* + * arch/arm/mach-ep93xx/gesbc9312.c + * Glomation GESBC-9312-sx support. + * + * Copyright (C) 2006 Lennert Buytenhek + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static void __init gesbc9312_init_machine(void) +{ + ep93xx_init_devices(); + physmap_configure(0x60000000, 0x00800000, 4, NULL); +} + +MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx") + /* Maintainer: Lennert Buytenhek */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = gesbc9312_init_machine, +MACHINE_END diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c new file mode 100644 index 00000000000..777e75daa8a --- /dev/null +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -0,0 +1,118 @@ +/* + * arch/arm/mach-ep93xx/ts72xx.c + * Technologic Systems TS72xx SBC support. + * + * Copyright (C) 2006 Lennert Buytenhek + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static struct map_desc ts72xx_io_desc[] __initdata = { + { + .virtual = TS72XX_MODEL_VIRT_BASE, + .pfn = __phys_to_pfn(TS72XX_MODEL_PHYS_BASE), + .length = TS72XX_MODEL_SIZE, + .type = MT_DEVICE, + }, { + .virtual = TS72XX_OPTIONS_VIRT_BASE, + .pfn = __phys_to_pfn(TS72XX_OPTIONS_PHYS_BASE), + .length = TS72XX_OPTIONS_SIZE, + .type = MT_DEVICE, + }, { + .virtual = TS72XX_OPTIONS2_VIRT_BASE, + .pfn = __phys_to_pfn(TS72XX_OPTIONS2_PHYS_BASE), + .length = TS72XX_OPTIONS2_SIZE, + .type = MT_DEVICE, + } +}; + +static struct map_desc ts72xx_nand_io_desc[] __initdata = { + { + .virtual = TS72XX_NAND_DATA_VIRT_BASE, + .pfn = __phys_to_pfn(TS72XX_NAND1_DATA_PHYS_BASE), + .length = TS72XX_NAND_DATA_SIZE, + .type = MT_DEVICE, + }, { + .virtual = TS72XX_NAND_CONTROL_VIRT_BASE, + .pfn = __phys_to_pfn(TS72XX_NAND1_CONTROL_PHYS_BASE), + .length = TS72XX_NAND_CONTROL_SIZE, + .type = MT_DEVICE, + }, { + .virtual = TS72XX_NAND_BUSY_VIRT_BASE, + .pfn = __phys_to_pfn(TS72XX_NAND1_BUSY_PHYS_BASE), + .length = TS72XX_NAND_BUSY_SIZE, + .type = MT_DEVICE, + } +}; + +static struct map_desc ts72xx_alternate_nand_io_desc[] __initdata = { + { + .virtual = TS72XX_NAND_DATA_VIRT_BASE, + .pfn = __phys_to_pfn(TS72XX_NAND2_DATA_PHYS_BASE), + .length = TS72XX_NAND_DATA_SIZE, + .type = MT_DEVICE, + }, { + .virtual = TS72XX_NAND_CONTROL_VIRT_BASE, + .pfn = __phys_to_pfn(TS72XX_NAND2_CONTROL_PHYS_BASE), + .length = TS72XX_NAND_CONTROL_SIZE, + .type = MT_DEVICE, + }, { + .virtual = TS72XX_NAND_BUSY_VIRT_BASE, + .pfn = __phys_to_pfn(TS72XX_NAND2_BUSY_PHYS_BASE), + .length = TS72XX_NAND_BUSY_SIZE, + .type = MT_DEVICE, + } +}; + +static void __init ts72xx_map_io(void) +{ + ep93xx_map_io(); + iotable_init(ts72xx_io_desc, ARRAY_SIZE(ts72xx_io_desc)); + + /* + * The TS-7200 has NOR flash, the other models have NAND flash. + */ + if (!board_is_ts7200()) { + if (is_ts9420_installed()) { + iotable_init(ts72xx_alternate_nand_io_desc, + ARRAY_SIZE(ts72xx_alternate_nand_io_desc)); + } else { + iotable_init(ts72xx_nand_io_desc, + ARRAY_SIZE(ts72xx_nand_io_desc)); + } + } +} + +static void __init ts72xx_init_machine(void) +{ + ep93xx_init_devices(); + if (board_is_ts7200()) + physmap_configure(TS72XX_NOR_PHYS_BASE, 0x01000000, 1, NULL); +} + +MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC") + /* Maintainer: Lennert Buytenhek */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = ts72xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = ts72xx_init_machine, +MACHINE_END diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 3b79d0e2345..eaaec90db97 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -62,7 +62,7 @@ config CPU_ARM720T # ARM920T config CPU_ARM920T bool "Support ARM920T processor" if !ARCH_S3C2410 - depends on ARCH_INTEGRATOR || ARCH_S3C2410 || ARCH_IMX || ARCH_AAEC2000 || ARCH_AT91RM9200 + depends on ARCH_EP93XX || ARCH_INTEGRATOR || ARCH_S3C2410 || ARCH_IMX || ARCH_AAEC2000 || ARCH_AT91RM9200 default y if ARCH_S3C2410 || ARCH_AT91RM9200 select CPU_32v4 select CPU_ABRT_EV4T -- cgit v1.2.3-18-g5258 From a8e19667a42d752f3eca6eaa17aa5d6f93066dfe Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 20 Mar 2006 17:10:14 +0000 Subject: [ARM] 3371/1: ep93xx: gpio support Patch from Lennert Buytenhek Add support for setting the direction of and getting/setting the value of the 64 GPIO lines. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- arch/arm/mach-ep93xx/core.c | 68 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 68 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index f831f74dc8c..7d3e79990fa 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -45,6 +45,7 @@ #include #include #include +#include #include @@ -146,6 +147,73 @@ struct sys_timer ep93xx_timer = { }; +/************************************************************************* + * GPIO handling for EP93xx + *************************************************************************/ +static unsigned char data_register_offset[8] = { + 0x00, 0x04, 0x08, 0x0c, 0x20, 0x30, 0x38, 0x40, +}; + +static unsigned char data_direction_register_offset[8] = { + 0x10, 0x14, 0x18, 0x1c, 0x24, 0x34, 0x3c, 0x44, +}; + +void gpio_line_config(int line, int direction) +{ + unsigned int data_direction_register; + unsigned long flags; + unsigned char v; + + data_direction_register = + EP93XX_GPIO_REG(data_direction_register_offset[line >> 3]); + + local_irq_save(flags); + if (direction == GPIO_OUT) { + v = __raw_readb(data_direction_register); + v |= 1 << (line & 7); + __raw_writeb(v, data_direction_register); + } else if (direction == GPIO_IN) { + v = __raw_readb(data_direction_register); + v &= ~(1 << (line & 7)); + __raw_writeb(v, data_direction_register); + } + local_irq_restore(flags); +} +EXPORT_SYMBOL(gpio_line_config); + +int gpio_line_get(int line) +{ + unsigned int data_register; + + data_register = EP93XX_GPIO_REG(data_register_offset[line >> 3]); + + return !!(__raw_readb(data_register) & (1 << (line & 7))); +} +EXPORT_SYMBOL(gpio_line_get); + +void gpio_line_set(int line, int value) +{ + unsigned int data_register; + unsigned long flags; + unsigned char v; + + data_register = EP93XX_GPIO_REG(data_register_offset[line >> 3]); + + local_irq_save(flags); + if (value == EP93XX_GPIO_HIGH) { + v = __raw_readb(data_register); + v |= 1 << (line & 7); + __raw_writeb(v, data_register); + } else if (value == EP93XX_GPIO_LOW) { + v = __raw_readb(data_register); + v &= ~(1 << (line & 7)); + __raw_writeb(v, data_register); + } + local_irq_restore(flags); +} +EXPORT_SYMBOL(gpio_line_set); + + /************************************************************************* * EP93xx IRQ handling *************************************************************************/ -- cgit v1.2.3-18-g5258 From dd18c34eac6686d04aed9e51e7b98842c0cef3d5 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 20 Mar 2006 17:10:15 +0000 Subject: [ARM] 3372/1: ep93xx: add defconfig Patch from Lennert Buytenhek Add ep93xx defconfig. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- arch/arm/configs/ep93xx_defconfig | 1087 +++++++++++++++++++++++++++++++++++++ 1 file changed, 1087 insertions(+) create mode 100644 arch/arm/configs/ep93xx_defconfig (limited to 'arch') diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig new file mode 100644 index 00000000000..8dcc8e8ec81 --- /dev/null +++ b/arch/arm/configs/ep93xx_defconfig @@ -0,0 +1,1087 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.16 +# Mon Mar 20 14:54:51 2006 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_UID16=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set +CONFIG_OBSOLETE_INTERMODULE=y + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +CONFIG_ARCH_EP93XX=y +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_AT91RM9200 is not set + +# +# Cirrus EP93xx Implementation Options +# +CONFIG_CRUNCH=y + +# +# EP93xx Platforms +# +CONFIG_MACH_GESBC9312=y +CONFIG_MACH_TS72XX=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM920T=y +CONFIG_CPU_32v4=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +CONFIG_ARM_VIC=y + +# +# Bus support +# +CONFIG_ARM_AMBA=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/nfs ip=bootp" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +CONFIG_FPE_NWFPE_XP=y +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set +# CONFIG_APM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +CONFIG_NET_KEY=y +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_GEOMETRY is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_AMDSTD_RETRY=0 +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +CONFIG_MTD_ROM=y +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=1 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_VERIFY_WRITE=y +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_AMBA_PL010=y +CONFIG_SERIAL_AMBA_PL010_CONSOLE=y +# CONFIG_SERIAL_AMBA_PL011 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set +CONFIG_I2C_DEBUG_CORE=y +CONFIG_I2C_DEBUG_ALGO=y +CONFIG_I2C_DEBUG_BUS=y +CONFIG_I2C_DEBUG_CHIP=y + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +CONFIG_USB=y +CONFIG_USB_DEBUG=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +CONFIG_USB_DYNAMIC_MINORS=y +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +CONFIG_USB_RTL8150=y +# CONFIG_USB_USBNET is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=y +CONFIG_USB_SERIAL_CONSOLE=y +# CONFIG_USB_SERIAL_GENERIC is not set +# CONFIG_USB_SERIAL_AIRPRIME is not set +# CONFIG_USB_SERIAL_ANYDATA is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +# CONFIG_USB_SERIAL_FTDI_SIO is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +CONFIG_USB_SERIAL_PL2303=y +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OMNINET is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +CONFIG_DEBUG_SLAB=y +CONFIG_DEBUG_MUTEXES=y +CONFIG_DEBUG_SPINLOCK=y +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_WAITQ=y +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y -- cgit v1.2.3-18-g5258 From 18ec5c731271939acb414614e964c15c8ef52156 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 20 Mar 2006 17:10:17 +0000 Subject: [ARM] 3373/1: move uengine loader to arch/arm/common Patch from Lennert Buytenhek Move the uengine loader from arch/arm/mach-ixp2000 to arch/arm/common so that ixp23xx can use it too. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- arch/arm/common/Makefile | 1 + arch/arm/common/uengine.c | 473 ++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-ixp2000/Makefile | 2 +- arch/arm/mach-ixp2000/uengine.c | 473 ---------------------------------------- 4 files changed, 475 insertions(+), 474 deletions(-) create mode 100644 arch/arm/common/uengine.c delete mode 100644 arch/arm/mach-ixp2000/uengine.c (limited to 'arch') diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index c81a2ff6b5b..847e3e6356c 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -15,3 +15,4 @@ obj-$(CONFIG_SHARP_LOCOMO) += locomo.o obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o obj-$(CONFIG_SHARPSL_PM) += sharpsl_pm.o obj-$(CONFIG_SHARP_SCOOP) += scoop.o +obj-$(CONFIG_ARCH_IXP2000) += uengine.o diff --git a/arch/arm/common/uengine.c b/arch/arm/common/uengine.c new file mode 100644 index 00000000000..a1310b71004 --- /dev/null +++ b/arch/arm/common/uengine.c @@ -0,0 +1,473 @@ +/* + * Generic library functions for the microengines found on the Intel + * IXP2000 series of network processors. + * + * Copyright (C) 2004, 2005 Lennert Buytenhek + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as + * published by the Free Software Foundation; either version 2.1 of the + * License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define USTORE_ADDRESS 0x000 +#define USTORE_DATA_LOWER 0x004 +#define USTORE_DATA_UPPER 0x008 +#define CTX_ENABLES 0x018 +#define CC_ENABLE 0x01c +#define CSR_CTX_POINTER 0x020 +#define INDIRECT_CTX_STS 0x040 +#define ACTIVE_CTX_STS 0x044 +#define INDIRECT_CTX_SIG_EVENTS 0x048 +#define INDIRECT_CTX_WAKEUP_EVENTS 0x050 +#define NN_PUT 0x080 +#define NN_GET 0x084 +#define TIMESTAMP_LOW 0x0c0 +#define TIMESTAMP_HIGH 0x0c4 +#define T_INDEX_BYTE_INDEX 0x0f4 +#define LOCAL_CSR_STATUS 0x180 + +u32 ixp2000_uengine_mask; + +static void *ixp2000_uengine_csr_area(int uengine) +{ + return ((void *)IXP2000_UENGINE_CSR_VIRT_BASE) + (uengine << 10); +} + +/* + * LOCAL_CSR_STATUS=1 after a read or write to a microengine's CSR + * space means that the microengine we tried to access was also trying + * to access its own CSR space on the same clock cycle as we did. When + * this happens, we lose the arbitration process by default, and the + * read or write we tried to do was not actually performed, so we try + * again until it succeeds. + */ +u32 ixp2000_uengine_csr_read(int uengine, int offset) +{ + void *uebase; + u32 *local_csr_status; + u32 *reg; + u32 value; + + uebase = ixp2000_uengine_csr_area(uengine); + + local_csr_status = (u32 *)(uebase + LOCAL_CSR_STATUS); + reg = (u32 *)(uebase + offset); + do { + value = ixp2000_reg_read(reg); + } while (ixp2000_reg_read(local_csr_status) & 1); + + return value; +} +EXPORT_SYMBOL(ixp2000_uengine_csr_read); + +void ixp2000_uengine_csr_write(int uengine, int offset, u32 value) +{ + void *uebase; + u32 *local_csr_status; + u32 *reg; + + uebase = ixp2000_uengine_csr_area(uengine); + + local_csr_status = (u32 *)(uebase + LOCAL_CSR_STATUS); + reg = (u32 *)(uebase + offset); + do { + ixp2000_reg_write(reg, value); + } while (ixp2000_reg_read(local_csr_status) & 1); +} +EXPORT_SYMBOL(ixp2000_uengine_csr_write); + +void ixp2000_uengine_reset(u32 uengine_mask) +{ + ixp2000_reg_wrb(IXP2000_RESET1, uengine_mask & ixp2000_uengine_mask); + ixp2000_reg_wrb(IXP2000_RESET1, 0); +} +EXPORT_SYMBOL(ixp2000_uengine_reset); + +void ixp2000_uengine_set_mode(int uengine, u32 mode) +{ + /* + * CTL_STR_PAR_EN: unconditionally enable parity checking on + * control store. + */ + mode |= 0x10000000; + ixp2000_uengine_csr_write(uengine, CTX_ENABLES, mode); + + /* + * Enable updating of condition codes. + */ + ixp2000_uengine_csr_write(uengine, CC_ENABLE, 0x00002000); + + /* + * Initialise other per-microengine registers. + */ + ixp2000_uengine_csr_write(uengine, NN_PUT, 0x00); + ixp2000_uengine_csr_write(uengine, NN_GET, 0x00); + ixp2000_uengine_csr_write(uengine, T_INDEX_BYTE_INDEX, 0); +} +EXPORT_SYMBOL(ixp2000_uengine_set_mode); + +static int make_even_parity(u32 x) +{ + return hweight32(x) & 1; +} + +static void ustore_write(int uengine, u64 insn) +{ + /* + * Generate even parity for top and bottom 20 bits. + */ + insn |= (u64)make_even_parity((insn >> 20) & 0x000fffff) << 41; + insn |= (u64)make_even_parity(insn & 0x000fffff) << 40; + + /* + * Write to microstore. The second write auto-increments + * the USTORE_ADDRESS index register. + */ + ixp2000_uengine_csr_write(uengine, USTORE_DATA_LOWER, (u32)insn); + ixp2000_uengine_csr_write(uengine, USTORE_DATA_UPPER, (u32)(insn >> 32)); +} + +void ixp2000_uengine_load_microcode(int uengine, u8 *ucode, int insns) +{ + int i; + + /* + * Start writing to microstore at address 0. + */ + ixp2000_uengine_csr_write(uengine, USTORE_ADDRESS, 0x80000000); + for (i = 0; i < insns; i++) { + u64 insn; + + insn = (((u64)ucode[0]) << 32) | + (((u64)ucode[1]) << 24) | + (((u64)ucode[2]) << 16) | + (((u64)ucode[3]) << 8) | + ((u64)ucode[4]); + ucode += 5; + + ustore_write(uengine, insn); + } + + /* + * Pad with a few NOPs at the end (to avoid the microengine + * aborting as it prefetches beyond the last instruction), unless + * we run off the end of the instruction store first, at which + * point the address register will wrap back to zero. + */ + for (i = 0; i < 4; i++) { + u32 addr; + + addr = ixp2000_uengine_csr_read(uengine, USTORE_ADDRESS); + if (addr == 0x80000000) + break; + ustore_write(uengine, 0xf0000c0300ULL); + } + + /* + * End programming. + */ + ixp2000_uengine_csr_write(uengine, USTORE_ADDRESS, 0x00000000); +} +EXPORT_SYMBOL(ixp2000_uengine_load_microcode); + +void ixp2000_uengine_init_context(int uengine, int context, int pc) +{ + /* + * Select the right context for indirect access. + */ + ixp2000_uengine_csr_write(uengine, CSR_CTX_POINTER, context); + + /* + * Initialise signal masks to immediately go to Ready state. + */ + ixp2000_uengine_csr_write(uengine, INDIRECT_CTX_SIG_EVENTS, 1); + ixp2000_uengine_csr_write(uengine, INDIRECT_CTX_WAKEUP_EVENTS, 1); + + /* + * Set program counter. + */ + ixp2000_uengine_csr_write(uengine, INDIRECT_CTX_STS, pc); +} +EXPORT_SYMBOL(ixp2000_uengine_init_context); + +void ixp2000_uengine_start_contexts(int uengine, u8 ctx_mask) +{ + u32 mask; + + /* + * Enable the specified context to go to Executing state. + */ + mask = ixp2000_uengine_csr_read(uengine, CTX_ENABLES); + mask |= ctx_mask << 8; + ixp2000_uengine_csr_write(uengine, CTX_ENABLES, mask); +} +EXPORT_SYMBOL(ixp2000_uengine_start_contexts); + +void ixp2000_uengine_stop_contexts(int uengine, u8 ctx_mask) +{ + u32 mask; + + /* + * Disable the Ready->Executing transition. Note that this + * does not stop the context until it voluntarily yields. + */ + mask = ixp2000_uengine_csr_read(uengine, CTX_ENABLES); + mask &= ~(ctx_mask << 8); + ixp2000_uengine_csr_write(uengine, CTX_ENABLES, mask); +} +EXPORT_SYMBOL(ixp2000_uengine_stop_contexts); + +static int check_ixp_type(struct ixp2000_uengine_code *c) +{ + u32 product_id; + u32 rev; + + product_id = ixp2000_reg_read(IXP2000_PRODUCT_ID); + if (((product_id >> 16) & 0x1f) != 0) + return 0; + + switch ((product_id >> 8) & 0xff) { + case 0: /* IXP2800 */ + if (!(c->cpu_model_bitmask & 4)) + return 0; + break; + + case 1: /* IXP2850 */ + if (!(c->cpu_model_bitmask & 8)) + return 0; + break; + + case 2: /* IXP2400 */ + if (!(c->cpu_model_bitmask & 2)) + return 0; + break; + + default: + return 0; + } + + rev = product_id & 0xff; + if (rev < c->cpu_min_revision || rev > c->cpu_max_revision) + return 0; + + return 1; +} + +static void generate_ucode(u8 *ucode, u32 *gpr_a, u32 *gpr_b) +{ + int offset; + int i; + + offset = 0; + + for (i = 0; i < 128; i++) { + u8 b3; + u8 b2; + u8 b1; + u8 b0; + + b3 = (gpr_a[i] >> 24) & 0xff; + b2 = (gpr_a[i] >> 16) & 0xff; + b1 = (gpr_a[i] >> 8) & 0xff; + b0 = gpr_a[i] & 0xff; + + // immed[@ai, (b1 << 8) | b0] + // 11110000 0000VVVV VVVV11VV VVVVVV00 1IIIIIII + ucode[offset++] = 0xf0; + ucode[offset++] = (b1 >> 4); + ucode[offset++] = (b1 << 4) | 0x0c | (b0 >> 6); + ucode[offset++] = (b0 << 2); + ucode[offset++] = 0x80 | i; + + // immed_w1[@ai, (b3 << 8) | b2] + // 11110100 0100VVVV VVVV11VV VVVVVV00 1IIIIIII + ucode[offset++] = 0xf4; + ucode[offset++] = 0x40 | (b3 >> 4); + ucode[offset++] = (b3 << 4) | 0x0c | (b2 >> 6); + ucode[offset++] = (b2 << 2); + ucode[offset++] = 0x80 | i; + } + + for (i = 0; i < 128; i++) { + u8 b3; + u8 b2; + u8 b1; + u8 b0; + + b3 = (gpr_b[i] >> 24) & 0xff; + b2 = (gpr_b[i] >> 16) & 0xff; + b1 = (gpr_b[i] >> 8) & 0xff; + b0 = gpr_b[i] & 0xff; + + // immed[@bi, (b1 << 8) | b0] + // 11110000 0000VVVV VVVV001I IIIIII11 VVVVVVVV + ucode[offset++] = 0xf0; + ucode[offset++] = (b1 >> 4); + ucode[offset++] = (b1 << 4) | 0x02 | (i >> 6); + ucode[offset++] = (i << 2) | 0x03; + ucode[offset++] = b0; + + // immed_w1[@bi, (b3 << 8) | b2] + // 11110100 0100VVVV VVVV001I IIIIII11 VVVVVVVV + ucode[offset++] = 0xf4; + ucode[offset++] = 0x40 | (b3 >> 4); + ucode[offset++] = (b3 << 4) | 0x02 | (i >> 6); + ucode[offset++] = (i << 2) | 0x03; + ucode[offset++] = b2; + } + + // ctx_arb[kill] + ucode[offset++] = 0xe0; + ucode[offset++] = 0x00; + ucode[offset++] = 0x01; + ucode[offset++] = 0x00; + ucode[offset++] = 0x00; +} + +static int set_initial_registers(int uengine, struct ixp2000_uengine_code *c) +{ + int per_ctx_regs; + u32 *gpr_a; + u32 *gpr_b; + u8 *ucode; + int i; + + gpr_a = kmalloc(128 * sizeof(u32), GFP_KERNEL); + gpr_b = kmalloc(128 * sizeof(u32), GFP_KERNEL); + ucode = kmalloc(513 * 5, GFP_KERNEL); + if (gpr_a == NULL || gpr_b == NULL || ucode == NULL) { + kfree(ucode); + kfree(gpr_b); + kfree(gpr_a); + return 1; + } + + per_ctx_regs = 16; + if (c->uengine_parameters & IXP2000_UENGINE_4_CONTEXTS) + per_ctx_regs = 32; + + memset(gpr_a, 0, sizeof(gpr_a)); + memset(gpr_b, 0, sizeof(gpr_b)); + for (i = 0; i < 256; i++) { + struct ixp2000_reg_value *r = c->initial_reg_values + i; + u32 *bank; + int inc; + int j; + + if (r->reg == -1) + break; + + bank = (r->reg & 0x400) ? gpr_b : gpr_a; + inc = (r->reg & 0x80) ? 128 : per_ctx_regs; + + j = r->reg & 0x7f; + while (j < 128) { + bank[j] = r->value; + j += inc; + } + } + + generate_ucode(ucode, gpr_a, gpr_b); + ixp2000_uengine_load_microcode(uengine, ucode, 513); + ixp2000_uengine_init_context(uengine, 0, 0); + ixp2000_uengine_start_contexts(uengine, 0x01); + for (i = 0; i < 100; i++) { + u32 status; + + status = ixp2000_uengine_csr_read(uengine, ACTIVE_CTX_STS); + if (!(status & 0x80000000)) + break; + } + ixp2000_uengine_stop_contexts(uengine, 0x01); + + kfree(ucode); + kfree(gpr_b); + kfree(gpr_a); + + return !!(i == 100); +} + +int ixp2000_uengine_load(int uengine, struct ixp2000_uengine_code *c) +{ + int ctx; + + if (!check_ixp_type(c)) + return 1; + + if (!(ixp2000_uengine_mask & (1 << uengine))) + return 1; + + ixp2000_uengine_reset(1 << uengine); + ixp2000_uengine_set_mode(uengine, c->uengine_parameters); + if (set_initial_registers(uengine, c)) + return 1; + ixp2000_uengine_load_microcode(uengine, c->insns, c->num_insns); + + for (ctx = 0; ctx < 8; ctx++) + ixp2000_uengine_init_context(uengine, ctx, 0); + + return 0; +} +EXPORT_SYMBOL(ixp2000_uengine_load); + + +static int __init ixp2000_uengine_init(void) +{ + int uengine; + u32 value; + + /* + * Determine number of microengines present. + */ + switch ((ixp2000_reg_read(IXP2000_PRODUCT_ID) >> 8) & 0x1fff) { + case 0: /* IXP2800 */ + case 1: /* IXP2850 */ + ixp2000_uengine_mask = 0x00ff00ff; + break; + + case 2: /* IXP2400 */ + ixp2000_uengine_mask = 0x000f000f; + break; + + default: + printk(KERN_INFO "Detected unknown IXP2000 model (%.8x)\n", + (unsigned int)ixp2000_reg_read(IXP2000_PRODUCT_ID)); + ixp2000_uengine_mask = 0x00000000; + break; + } + + /* + * Reset microengines. + */ + ixp2000_uengine_reset(ixp2000_uengine_mask); + + /* + * Synchronise timestamp counters across all microengines. + */ + value = ixp2000_reg_read(IXP2000_MISC_CONTROL); + ixp2000_reg_wrb(IXP2000_MISC_CONTROL, value & ~0x80); + for (uengine = 0; uengine < 32; uengine++) { + if (ixp2000_uengine_mask & (1 << uengine)) { + ixp2000_uengine_csr_write(uengine, TIMESTAMP_LOW, 0); + ixp2000_uengine_csr_write(uengine, TIMESTAMP_HIGH, 0); + } + } + ixp2000_reg_wrb(IXP2000_MISC_CONTROL, value | 0x80); + + return 0; +} + +subsys_initcall(ixp2000_uengine_init); diff --git a/arch/arm/mach-ixp2000/Makefile b/arch/arm/mach-ixp2000/Makefile index 9621aeb61f4..1e6139d42a9 100644 --- a/arch/arm/mach-ixp2000/Makefile +++ b/arch/arm/mach-ixp2000/Makefile @@ -1,7 +1,7 @@ # # Makefile for the linux kernel. # -obj-y := core.o pci.o uengine.o +obj-y := core.o pci.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-ixp2000/uengine.c b/arch/arm/mach-ixp2000/uengine.c deleted file mode 100644 index ec4e007a22e..00000000000 --- a/arch/arm/mach-ixp2000/uengine.c +++ /dev/null @@ -1,473 +0,0 @@ -/* - * Generic library functions for the microengines found on the Intel - * IXP2000 series of network processors. - * - * Copyright (C) 2004, 2005 Lennert Buytenhek - * Dedicated to Marija Kulikova. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU Lesser General Public License as - * published by the Free Software Foundation; either version 2.1 of the - * License, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define USTORE_ADDRESS 0x000 -#define USTORE_DATA_LOWER 0x004 -#define USTORE_DATA_UPPER 0x008 -#define CTX_ENABLES 0x018 -#define CC_ENABLE 0x01c -#define CSR_CTX_POINTER 0x020 -#define INDIRECT_CTX_STS 0x040 -#define ACTIVE_CTX_STS 0x044 -#define INDIRECT_CTX_SIG_EVENTS 0x048 -#define INDIRECT_CTX_WAKEUP_EVENTS 0x050 -#define NN_PUT 0x080 -#define NN_GET 0x084 -#define TIMESTAMP_LOW 0x0c0 -#define TIMESTAMP_HIGH 0x0c4 -#define T_INDEX_BYTE_INDEX 0x0f4 -#define LOCAL_CSR_STATUS 0x180 - -u32 ixp2000_uengine_mask; - -static void *ixp2000_uengine_csr_area(int uengine) -{ - return ((void *)IXP2000_UENGINE_CSR_VIRT_BASE) + (uengine << 10); -} - -/* - * LOCAL_CSR_STATUS=1 after a read or write to a microengine's CSR - * space means that the microengine we tried to access was also trying - * to access its own CSR space on the same clock cycle as we did. When - * this happens, we lose the arbitration process by default, and the - * read or write we tried to do was not actually performed, so we try - * again until it succeeds. - */ -u32 ixp2000_uengine_csr_read(int uengine, int offset) -{ - void *uebase; - u32 *local_csr_status; - u32 *reg; - u32 value; - - uebase = ixp2000_uengine_csr_area(uengine); - - local_csr_status = (u32 *)(uebase + LOCAL_CSR_STATUS); - reg = (u32 *)(uebase + offset); - do { - value = ixp2000_reg_read(reg); - } while (ixp2000_reg_read(local_csr_status) & 1); - - return value; -} -EXPORT_SYMBOL(ixp2000_uengine_csr_read); - -void ixp2000_uengine_csr_write(int uengine, int offset, u32 value) -{ - void *uebase; - u32 *local_csr_status; - u32 *reg; - - uebase = ixp2000_uengine_csr_area(uengine); - - local_csr_status = (u32 *)(uebase + LOCAL_CSR_STATUS); - reg = (u32 *)(uebase + offset); - do { - ixp2000_reg_write(reg, value); - } while (ixp2000_reg_read(local_csr_status) & 1); -} -EXPORT_SYMBOL(ixp2000_uengine_csr_write); - -void ixp2000_uengine_reset(u32 uengine_mask) -{ - ixp2000_reg_wrb(IXP2000_RESET1, uengine_mask & ixp2000_uengine_mask); - ixp2000_reg_wrb(IXP2000_RESET1, 0); -} -EXPORT_SYMBOL(ixp2000_uengine_reset); - -void ixp2000_uengine_set_mode(int uengine, u32 mode) -{ - /* - * CTL_STR_PAR_EN: unconditionally enable parity checking on - * control store. - */ - mode |= 0x10000000; - ixp2000_uengine_csr_write(uengine, CTX_ENABLES, mode); - - /* - * Enable updating of condition codes. - */ - ixp2000_uengine_csr_write(uengine, CC_ENABLE, 0x00002000); - - /* - * Initialise other per-microengine registers. - */ - ixp2000_uengine_csr_write(uengine, NN_PUT, 0x00); - ixp2000_uengine_csr_write(uengine, NN_GET, 0x00); - ixp2000_uengine_csr_write(uengine, T_INDEX_BYTE_INDEX, 0); -} -EXPORT_SYMBOL(ixp2000_uengine_set_mode); - -static int make_even_parity(u32 x) -{ - return hweight32(x) & 1; -} - -static void ustore_write(int uengine, u64 insn) -{ - /* - * Generate even parity for top and bottom 20 bits. - */ - insn |= (u64)make_even_parity((insn >> 20) & 0x000fffff) << 41; - insn |= (u64)make_even_parity(insn & 0x000fffff) << 40; - - /* - * Write to microstore. The second write auto-increments - * the USTORE_ADDRESS index register. - */ - ixp2000_uengine_csr_write(uengine, USTORE_DATA_LOWER, (u32)insn); - ixp2000_uengine_csr_write(uengine, USTORE_DATA_UPPER, (u32)(insn >> 32)); -} - -void ixp2000_uengine_load_microcode(int uengine, u8 *ucode, int insns) -{ - int i; - - /* - * Start writing to microstore at address 0. - */ - ixp2000_uengine_csr_write(uengine, USTORE_ADDRESS, 0x80000000); - for (i = 0; i < insns; i++) { - u64 insn; - - insn = (((u64)ucode[0]) << 32) | - (((u64)ucode[1]) << 24) | - (((u64)ucode[2]) << 16) | - (((u64)ucode[3]) << 8) | - ((u64)ucode[4]); - ucode += 5; - - ustore_write(uengine, insn); - } - - /* - * Pad with a few NOPs at the end (to avoid the microengine - * aborting as it prefetches beyond the last instruction), unless - * we run off the end of the instruction store first, at which - * point the address register will wrap back to zero. - */ - for (i = 0; i < 4; i++) { - u32 addr; - - addr = ixp2000_uengine_csr_read(uengine, USTORE_ADDRESS); - if (addr == 0x80000000) - break; - ustore_write(uengine, 0xf0000c0300ULL); - } - - /* - * End programming. - */ - ixp2000_uengine_csr_write(uengine, USTORE_ADDRESS, 0x00000000); -} -EXPORT_SYMBOL(ixp2000_uengine_load_microcode); - -void ixp2000_uengine_init_context(int uengine, int context, int pc) -{ - /* - * Select the right context for indirect access. - */ - ixp2000_uengine_csr_write(uengine, CSR_CTX_POINTER, context); - - /* - * Initialise signal masks to immediately go to Ready state. - */ - ixp2000_uengine_csr_write(uengine, INDIRECT_CTX_SIG_EVENTS, 1); - ixp2000_uengine_csr_write(uengine, INDIRECT_CTX_WAKEUP_EVENTS, 1); - - /* - * Set program counter. - */ - ixp2000_uengine_csr_write(uengine, INDIRECT_CTX_STS, pc); -} -EXPORT_SYMBOL(ixp2000_uengine_init_context); - -void ixp2000_uengine_start_contexts(int uengine, u8 ctx_mask) -{ - u32 mask; - - /* - * Enable the specified context to go to Executing state. - */ - mask = ixp2000_uengine_csr_read(uengine, CTX_ENABLES); - mask |= ctx_mask << 8; - ixp2000_uengine_csr_write(uengine, CTX_ENABLES, mask); -} -EXPORT_SYMBOL(ixp2000_uengine_start_contexts); - -void ixp2000_uengine_stop_contexts(int uengine, u8 ctx_mask) -{ - u32 mask; - - /* - * Disable the Ready->Executing transition. Note that this - * does not stop the context until it voluntarily yields. - */ - mask = ixp2000_uengine_csr_read(uengine, CTX_ENABLES); - mask &= ~(ctx_mask << 8); - ixp2000_uengine_csr_write(uengine, CTX_ENABLES, mask); -} -EXPORT_SYMBOL(ixp2000_uengine_stop_contexts); - -static int check_ixp_type(struct ixp2000_uengine_code *c) -{ - u32 product_id; - u32 rev; - - product_id = ixp2000_reg_read(IXP2000_PRODUCT_ID); - if (((product_id >> 16) & 0x1f) != 0) - return 0; - - switch ((product_id >> 8) & 0xff) { - case 0: /* IXP2800 */ - if (!(c->cpu_model_bitmask & 4)) - return 0; - break; - - case 1: /* IXP2850 */ - if (!(c->cpu_model_bitmask & 8)) - return 0; - break; - - case 2: /* IXP2400 */ - if (!(c->cpu_model_bitmask & 2)) - return 0; - break; - - default: - return 0; - } - - rev = product_id & 0xff; - if (rev < c->cpu_min_revision || rev > c->cpu_max_revision) - return 0; - - return 1; -} - -static void generate_ucode(u8 *ucode, u32 *gpr_a, u32 *gpr_b) -{ - int offset; - int i; - - offset = 0; - - for (i = 0; i < 128; i++) { - u8 b3; - u8 b2; - u8 b1; - u8 b0; - - b3 = (gpr_a[i] >> 24) & 0xff; - b2 = (gpr_a[i] >> 16) & 0xff; - b1 = (gpr_a[i] >> 8) & 0xff; - b0 = gpr_a[i] & 0xff; - - // immed[@ai, (b1 << 8) | b0] - // 11110000 0000VVVV VVVV11VV VVVVVV00 1IIIIIII - ucode[offset++] = 0xf0; - ucode[offset++] = (b1 >> 4); - ucode[offset++] = (b1 << 4) | 0x0c | (b0 >> 6); - ucode[offset++] = (b0 << 2); - ucode[offset++] = 0x80 | i; - - // immed_w1[@ai, (b3 << 8) | b2] - // 11110100 0100VVVV VVVV11VV VVVVVV00 1IIIIIII - ucode[offset++] = 0xf4; - ucode[offset++] = 0x40 | (b3 >> 4); - ucode[offset++] = (b3 << 4) | 0x0c | (b2 >> 6); - ucode[offset++] = (b2 << 2); - ucode[offset++] = 0x80 | i; - } - - for (i = 0; i < 128; i++) { - u8 b3; - u8 b2; - u8 b1; - u8 b0; - - b3 = (gpr_b[i] >> 24) & 0xff; - b2 = (gpr_b[i] >> 16) & 0xff; - b1 = (gpr_b[i] >> 8) & 0xff; - b0 = gpr_b[i] & 0xff; - - // immed[@bi, (b1 << 8) | b0] - // 11110000 0000VVVV VVVV001I IIIIII11 VVVVVVVV - ucode[offset++] = 0xf0; - ucode[offset++] = (b1 >> 4); - ucode[offset++] = (b1 << 4) | 0x02 | (i >> 6); - ucode[offset++] = (i << 2) | 0x03; - ucode[offset++] = b0; - - // immed_w1[@bi, (b3 << 8) | b2] - // 11110100 0100VVVV VVVV001I IIIIII11 VVVVVVVV - ucode[offset++] = 0xf4; - ucode[offset++] = 0x40 | (b3 >> 4); - ucode[offset++] = (b3 << 4) | 0x02 | (i >> 6); - ucode[offset++] = (i << 2) | 0x03; - ucode[offset++] = b2; - } - - // ctx_arb[kill] - ucode[offset++] = 0xe0; - ucode[offset++] = 0x00; - ucode[offset++] = 0x01; - ucode[offset++] = 0x00; - ucode[offset++] = 0x00; -} - -static int set_initial_registers(int uengine, struct ixp2000_uengine_code *c) -{ - int per_ctx_regs; - u32 *gpr_a; - u32 *gpr_b; - u8 *ucode; - int i; - - gpr_a = kmalloc(128 * sizeof(u32), GFP_KERNEL); - gpr_b = kmalloc(128 * sizeof(u32), GFP_KERNEL); - ucode = kmalloc(513 * 5, GFP_KERNEL); - if (gpr_a == NULL || gpr_b == NULL || ucode == NULL) { - kfree(ucode); - kfree(gpr_b); - kfree(gpr_a); - return 1; - } - - per_ctx_regs = 16; - if (c->uengine_parameters & IXP2000_UENGINE_4_CONTEXTS) - per_ctx_regs = 32; - - memset(gpr_a, 0, sizeof(gpr_a)); - memset(gpr_b, 0, sizeof(gpr_b)); - for (i = 0; i < 256; i++) { - struct ixp2000_reg_value *r = c->initial_reg_values + i; - u32 *bank; - int inc; - int j; - - if (r->reg == -1) - break; - - bank = (r->reg & 0x400) ? gpr_b : gpr_a; - inc = (r->reg & 0x80) ? 128 : per_ctx_regs; - - j = r->reg & 0x7f; - while (j < 128) { - bank[j] = r->value; - j += inc; - } - } - - generate_ucode(ucode, gpr_a, gpr_b); - ixp2000_uengine_load_microcode(uengine, ucode, 513); - ixp2000_uengine_init_context(uengine, 0, 0); - ixp2000_uengine_start_contexts(uengine, 0x01); - for (i = 0; i < 100; i++) { - u32 status; - - status = ixp2000_uengine_csr_read(uengine, ACTIVE_CTX_STS); - if (!(status & 0x80000000)) - break; - } - ixp2000_uengine_stop_contexts(uengine, 0x01); - - kfree(ucode); - kfree(gpr_b); - kfree(gpr_a); - - return !!(i == 100); -} - -int ixp2000_uengine_load(int uengine, struct ixp2000_uengine_code *c) -{ - int ctx; - - if (!check_ixp_type(c)) - return 1; - - if (!(ixp2000_uengine_mask & (1 << uengine))) - return 1; - - ixp2000_uengine_reset(1 << uengine); - ixp2000_uengine_set_mode(uengine, c->uengine_parameters); - if (set_initial_registers(uengine, c)) - return 1; - ixp2000_uengine_load_microcode(uengine, c->insns, c->num_insns); - - for (ctx = 0; ctx < 8; ctx++) - ixp2000_uengine_init_context(uengine, ctx, 0); - - return 0; -} -EXPORT_SYMBOL(ixp2000_uengine_load); - - -static int __init ixp2000_uengine_init(void) -{ - int uengine; - u32 value; - - /* - * Determine number of microengines present. - */ - switch ((ixp2000_reg_read(IXP2000_PRODUCT_ID) >> 8) & 0x1fff) { - case 0: /* IXP2800 */ - case 1: /* IXP2850 */ - ixp2000_uengine_mask = 0x00ff00ff; - break; - - case 2: /* IXP2400 */ - ixp2000_uengine_mask = 0x000f000f; - break; - - default: - printk(KERN_INFO "Detected unknown IXP2000 model (%.8x)\n", - (unsigned int)ixp2000_reg_read(IXP2000_PRODUCT_ID)); - ixp2000_uengine_mask = 0x00000000; - break; - } - - /* - * Reset microengines. - */ - ixp2000_uengine_reset(ixp2000_uengine_mask); - - /* - * Synchronise timestamp counters across all microengines. - */ - value = ixp2000_reg_read(IXP2000_MISC_CONTROL); - ixp2000_reg_wrb(IXP2000_MISC_CONTROL, value & ~0x80); - for (uengine = 0; uengine < 32; uengine++) { - if (ixp2000_uengine_mask & (1 << uengine)) { - ixp2000_uengine_csr_write(uengine, TIMESTAMP_LOW, 0); - ixp2000_uengine_csr_write(uengine, TIMESTAMP_HIGH, 0); - } - } - ixp2000_reg_wrb(IXP2000_MISC_CONTROL, value | 0x80); - - return 0; -} - -subsys_initcall(ixp2000_uengine_init); -- cgit v1.2.3-18-g5258 From d2a02b93cf78205dd23226efb66481569900976e Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 20 Mar 2006 19:46:41 +0000 Subject: [ARM] Convert kmalloc+memset to kzalloc Convert all uses of kmalloc followed by memset to use kzalloc instead. Signed-off-by: Russell King --- arch/arm/common/locomo.c | 7 ++----- arch/arm/common/sa1111.c | 7 ++----- arch/arm/common/scoop.c | 6 ++---- arch/arm/kernel/apm.c | 4 +--- arch/arm/kernel/bios32.c | 4 +--- arch/arm/kernel/ecard.c | 4 +--- arch/arm/mach-footbridge/dc21285.c | 4 +--- arch/arm/mach-integrator/impd1.c | 7 ++----- arch/arm/mach-integrator/integrator_ap.c | 4 +--- arch/arm/mach-iop3xx/iq31244-pci.c | 4 +--- arch/arm/mach-iop3xx/iq80321-pci.c | 4 +--- arch/arm/mach-iop3xx/iq80331-pci.c | 4 +--- arch/arm/mach-iop3xx/iq80332-pci.c | 4 +--- arch/arm/mach-ixp4xx/common-pci.c | 3 +-- 14 files changed, 18 insertions(+), 48 deletions(-) (limited to 'arch') diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index 787e0d027f0..a7dc1370695 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -501,12 +501,11 @@ locomo_init_one_child(struct locomo *lchip, struct locomo_dev_info *info) struct locomo_dev *dev; int ret; - dev = kmalloc(sizeof(struct locomo_dev), GFP_KERNEL); + dev = kzalloc(sizeof(struct locomo_dev), GFP_KERNEL); if (!dev) { ret = -ENOMEM; goto out; } - memset(dev, 0, sizeof(struct locomo_dev)); strncpy(dev->dev.bus_id,info->name,sizeof(dev->dev.bus_id)); /* @@ -664,12 +663,10 @@ __locomo_probe(struct device *me, struct resource *mem, int irq) unsigned long r; int i, ret = -ENODEV; - lchip = kmalloc(sizeof(struct locomo), GFP_KERNEL); + lchip = kzalloc(sizeof(struct locomo), GFP_KERNEL); if (!lchip) return -ENOMEM; - memset(lchip, 0, sizeof(struct locomo)); - spin_lock_init(&lchip->lock); lchip->dev = me; diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 5ba1ee04234..3f68db84e5e 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -541,12 +541,11 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent, struct sa1111_dev *dev; int ret; - dev = kmalloc(sizeof(struct sa1111_dev), GFP_KERNEL); + dev = kzalloc(sizeof(struct sa1111_dev), GFP_KERNEL); if (!dev) { ret = -ENOMEM; goto out; } - memset(dev, 0, sizeof(struct sa1111_dev)); snprintf(dev->dev.bus_id, sizeof(dev->dev.bus_id), "%4.4lx", info->offset); @@ -621,12 +620,10 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq) unsigned int has_devs, val; int i, ret = -ENODEV; - sachip = kmalloc(sizeof(struct sa1111), GFP_KERNEL); + sachip = kzalloc(sizeof(struct sa1111), GFP_KERNEL); if (!sachip) return -ENOMEM; - memset(sachip, 0, sizeof(struct sa1111)); - sachip->clk = clk_get(me, "GPIO27_CLK"); if (!sachip->clk) { ret = PTR_ERR(sachip->clk); diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index a2dfe0b0f1e..5e830f444c6 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -132,12 +132,10 @@ int __init scoop_probe(struct platform_device *pdev) if (!mem) return -EINVAL; - devptr = kmalloc(sizeof(struct scoop_dev), GFP_KERNEL); - + devptr = kzalloc(sizeof(struct scoop_dev), GFP_KERNEL); if (!devptr) - return -ENOMEM; + return -ENOMEM; - memset(devptr, 0, sizeof(struct scoop_dev)); spin_lock_init(&devptr->scoop_lock); inf = pdev->dev.platform_data; diff --git a/arch/arm/kernel/apm.c b/arch/arm/kernel/apm.c index 766b6c05c6d..2bed290fec7 100644 --- a/arch/arm/kernel/apm.c +++ b/arch/arm/kernel/apm.c @@ -357,10 +357,8 @@ static int apm_open(struct inode * inode, struct file * filp) { struct apm_user *as; - as = (struct apm_user *)kmalloc(sizeof(*as), GFP_KERNEL); + as = (struct apm_user *)kzalloc(sizeof(*as), GFP_KERNEL); if (as) { - memset(as, 0, sizeof(*as)); - /* * XXX - this is a tiny bit broken, when we consider BSD * process accounting. If the device is opened by root, we diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index c4923fac8df..de606dfa8db 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -540,12 +540,10 @@ static void __init pcibios_init_hw(struct hw_pci *hw) int nr, busnr; for (nr = busnr = 0; nr < hw->nr_controllers; nr++) { - sys = kmalloc(sizeof(struct pci_sys_data), GFP_KERNEL); + sys = kzalloc(sizeof(struct pci_sys_data), GFP_KERNEL); if (!sys) panic("PCI: unable to allocate sys data!"); - memset(sys, 0, sizeof(struct pci_sys_data)); - sys->hw = hw; sys->busnr = busnr; sys->swizzle = hw->swizzle; diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c index 74ea29c3205..00aa225e8d9 100644 --- a/arch/arm/kernel/ecard.c +++ b/arch/arm/kernel/ecard.c @@ -807,14 +807,12 @@ static struct expansion_card *__init ecard_alloc_card(int type, int slot) unsigned long base; int i; - ec = kmalloc(sizeof(ecard_t), GFP_KERNEL); + ec = kzalloc(sizeof(ecard_t), GFP_KERNEL); if (!ec) { ec = ERR_PTR(-ENOMEM); goto nomem; } - memset(ec, 0, sizeof(ecard_t)); - ec->slot_no = slot; ec->type = type; ec->irq = NO_IRQ; diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c index e79884eea1f..5dace259783 100644 --- a/arch/arm/mach-footbridge/dc21285.c +++ b/arch/arm/mach-footbridge/dc21285.c @@ -255,14 +255,12 @@ int __init dc21285_setup(int nr, struct pci_sys_data *sys) if (nr || !footbridge_cfn_mode()) return 0; - res = kmalloc(sizeof(struct resource) * 2, GFP_KERNEL); + res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); if (!res) { printk("out of memory for root bus resources"); return 0; } - memset(res, 0, sizeof(struct resource) * 2); - res[0].flags = IORESOURCE_MEM; res[0].name = "Footbridge non-prefetch"; res[1].flags = IORESOURCE_MEM | IORESOURCE_PREFETCH; diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index a85d471c5bf..92d79fb3931 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -355,12 +355,11 @@ static int impd1_probe(struct lm_device *dev) if (!request_mem_region(dev->resource.start, SZ_4K, "LM registers")) return -EBUSY; - impd1 = kmalloc(sizeof(struct impd1_module), GFP_KERNEL); + impd1 = kzalloc(sizeof(struct impd1_module), GFP_KERNEL); if (!impd1) { ret = -ENOMEM; goto release_lm; } - memset(impd1, 0, sizeof(struct impd1_module)); impd1->base = ioremap(dev->resource.start, SZ_4K); if (!impd1->base) { @@ -389,12 +388,10 @@ static int impd1_probe(struct lm_device *dev) pc_base = dev->resource.start + idev->offset; - d = kmalloc(sizeof(struct amba_device), GFP_KERNEL); + d = kzalloc(sizeof(struct amba_device), GFP_KERNEL); if (!d) continue; - memset(d, 0, sizeof(struct amba_device)); - snprintf(d->dev.bus_id, sizeof(d->dev.bus_id), "lm%x:%5.5lx", dev->id, idev->offset >> 12); diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index d8d3c2a5a97..6d65c96ebfd 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -319,12 +319,10 @@ static void __init ap_init(void) if ((sc_dec & (16 << i)) == 0) continue; - lmdev = kmalloc(sizeof(struct lm_device), GFP_KERNEL); + lmdev = kzalloc(sizeof(struct lm_device), GFP_KERNEL); if (!lmdev) continue; - memset(lmdev, 0, sizeof(struct lm_device)); - lmdev->resource.start = 0xc0000000 + 0x10000000 * i; lmdev->resource.end = lmdev->resource.start + 0x0fffffff; lmdev->resource.flags = IORESOURCE_MEM; diff --git a/arch/arm/mach-iop3xx/iq31244-pci.c b/arch/arm/mach-iop3xx/iq31244-pci.c index c6a973ba8fc..f3c6413fa5b 100644 --- a/arch/arm/mach-iop3xx/iq31244-pci.c +++ b/arch/arm/mach-iop3xx/iq31244-pci.c @@ -74,12 +74,10 @@ static int iq31244_setup(int nr, struct pci_sys_data *sys) if(nr != 0) return 0; - res = kmalloc(sizeof(struct resource) * 2, GFP_KERNEL); + res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); if (!res) panic("PCI: unable to alloc resources"); - memset(res, 0, sizeof(struct resource) * 2); - res[0].start = IOP321_PCI_LOWER_IO_VA; res[0].end = IOP321_PCI_UPPER_IO_VA; res[0].name = "IQ31244 PCI I/O Space"; diff --git a/arch/arm/mach-iop3xx/iq80321-pci.c b/arch/arm/mach-iop3xx/iq80321-pci.c index 802f6d091b7..d9758d3f6e7 100644 --- a/arch/arm/mach-iop3xx/iq80321-pci.c +++ b/arch/arm/mach-iop3xx/iq80321-pci.c @@ -68,12 +68,10 @@ static int iq80321_setup(int nr, struct pci_sys_data *sys) if(nr != 0) return 0; - res = kmalloc(sizeof(struct resource) * 2, GFP_KERNEL); + res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); if (!res) panic("PCI: unable to alloc resources"); - memset(res, 0, sizeof(struct resource) * 2); - res[0].start = IOP321_PCI_LOWER_IO_VA; res[0].end = IOP321_PCI_UPPER_IO_VA; res[0].name = "IQ80321 PCI I/O Space"; diff --git a/arch/arm/mach-iop3xx/iq80331-pci.c b/arch/arm/mach-iop3xx/iq80331-pci.c index 654e450a131..40d86100249 100644 --- a/arch/arm/mach-iop3xx/iq80331-pci.c +++ b/arch/arm/mach-iop3xx/iq80331-pci.c @@ -64,12 +64,10 @@ static int iq80331_setup(int nr, struct pci_sys_data *sys) if(nr != 0) return 0; - res = kmalloc(sizeof(struct resource) * 2, GFP_KERNEL); + res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); if (!res) panic("PCI: unable to alloc resources"); - memset(res, 0, sizeof(struct resource) * 2); - res[0].start = IOP331_PCI_LOWER_IO_VA; res[0].end = IOP331_PCI_UPPER_IO_VA; res[0].name = "IQ80331 PCI I/O Space"; diff --git a/arch/arm/mach-iop3xx/iq80332-pci.c b/arch/arm/mach-iop3xx/iq80332-pci.c index 65951ffe463..afc0676318e 100644 --- a/arch/arm/mach-iop3xx/iq80332-pci.c +++ b/arch/arm/mach-iop3xx/iq80332-pci.c @@ -70,12 +70,10 @@ static int iq80332_setup(int nr, struct pci_sys_data *sys) if(nr != 0) return 0; - res = kmalloc(sizeof(struct resource) * 2, GFP_KERNEL); + res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); if (!res) panic("PCI: unable to alloc resources"); - memset(res, 0, sizeof(struct resource) * 2); - res[0].start = IOP331_PCI_LOWER_IO_VA; res[0].end = IOP331_PCI_UPPER_IO_VA; res[0].name = "IQ80332 PCI I/O Space"; diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c index 6e3462ed530..2d40fe1145f 100644 --- a/arch/arm/mach-ixp4xx/common-pci.c +++ b/arch/arm/mach-ixp4xx/common-pci.c @@ -463,7 +463,7 @@ int ixp4xx_setup(int nr, struct pci_sys_data *sys) if (nr >= 1) return 0; - res = kmalloc(sizeof(*res) * 2, GFP_KERNEL); + res = kzalloc(sizeof(*res) * 2, GFP_KERNEL); if (res == NULL) { /* * If we're out of memory this early, something is wrong, @@ -471,7 +471,6 @@ int ixp4xx_setup(int nr, struct pci_sys_data *sys) */ panic("PCI: unable to allocate resources?\n"); } - memset(res, 0, sizeof(*res) * 2); local_write_config(PCI_COMMAND, 2, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); -- cgit v1.2.3-18-g5258 From 6e8908edd5a140f4f0cc4338fa0420b0bb0f8efa Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 20 Mar 2006 21:00:08 +0000 Subject: [ARM] 3359/1: S3C24XX - add support for clk_set_rate Patch from Ben Dooks Add support for clk_set_rate and clk_round_rate to the s3c2410 clock implementation Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/clock.c | 14 +++++++++++++- arch/arm/mach-s3c2410/clock.h | 2 ++ 2 files changed, 15 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c index e205a6316b0..95c6d46c3dd 100644 --- a/arch/arm/mach-s3c2410/clock.c +++ b/arch/arm/mach-s3c2410/clock.c @@ -180,12 +180,24 @@ unsigned long clk_get_rate(struct clk *clk) long clk_round_rate(struct clk *clk, unsigned long rate) { + if (!IS_ERR(clk) && clk->round_rate) + return (clk->round_rate)(clk, rate); + return rate; } int clk_set_rate(struct clk *clk, unsigned long rate) { - return -EINVAL; + int ret; + + if (IS_ERR(clk)) + return -EINVAL; + + mutex_lock(&clocks_mutex); + ret = (clk->set_rate)(clk, rate); + mutex_unlock(&clocks_mutex); + + return ret; } struct clk *clk_get_parent(struct clk *clk) diff --git a/arch/arm/mach-s3c2410/clock.h b/arch/arm/mach-s3c2410/clock.h index c4f36f00649..32864b30c1e 100644 --- a/arch/arm/mach-s3c2410/clock.h +++ b/arch/arm/mach-s3c2410/clock.h @@ -21,6 +21,8 @@ struct clk { unsigned long ctrlbit; int (*enable)(struct clk *, int enable); + int (*set_rate)(struct clk *c, unsigned long rate); + unsigned long (*round_rate)(struct clk *c, unsigned long rate); int (*set_parent)(struct clk *c, struct clk *parent); }; -- cgit v1.2.3-18-g5258 From e44c03960f232e0f9bd2f6bcffccf83770757a8e Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 20 Mar 2006 21:00:12 +0000 Subject: [ARM] 3360/1: S3C2440 - add set rate methods and camera clock Patch from Ben Dooks Add set_rate methods for the extra clocks on the S3C2440 and add the camera UPLL clock source Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/s3c2440-clock.c | 51 +++++++++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-s3c2410/s3c2440-clock.c b/arch/arm/mach-s3c2410/s3c2440-clock.c index 2d0fa03a257..7bca0be8738 100644 --- a/arch/arm/mach-s3c2410/s3c2440-clock.c +++ b/arch/arm/mach-s3c2410/s3c2440-clock.c @@ -45,6 +45,48 @@ /* S3C2440 extended clock support */ +static unsigned long s3c2440_camif_upll_round(struct clk *clk, + unsigned long rate) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + int div; + + if (rate > parent_rate) + return parent_rate; + + /* note, we remove the +/- 1 calculations for the divisor */ + + div = (parent_rate / rate) / 2; + + if (div < 1) + div = 1; + else if (div > 16) + div = 16; + + return parent_rate / (div * 2); +} + +static int s3c2440_camif_upll_setrate(struct clk *clk, unsigned long rate) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); + + rate = s3c2440_camif_upll_round(clk, rate); + + camdivn &= ~(S3C2440_CAMDIVN_CAMCLK_SEL | S3C2440_CAMDIVN_CAMCLK_MASK); + + if (rate != parent_rate) { + camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL; + camdivn |= (((parent_rate / rate) / 2) - 1); + } + + __raw_writel(camdivn, S3C2440_CAMDIVN); + + return 0; +} + +/* Extra S3C2440 clocks */ + static struct clk s3c2440_clk_cam = { .name = "camif", .id = -1, @@ -52,6 +94,13 @@ static struct clk s3c2440_clk_cam = { .ctrlbit = S3C2440_CLKCON_CAMERA, }; +static struct clk s3c2440_clk_cam_upll = { + .name = "camif-upll", + .id = -1, + .set_rate = s3c2440_camif_upll_setrate, + .round_rate = s3c2440_camif_upll_round, +}; + static struct clk s3c2440_clk_ac97 = { .name = "ac97", .id = -1, @@ -78,9 +127,11 @@ static int s3c2440_clk_add(struct sys_device *sysdev) s3c2440_clk_cam.parent = clk_h; s3c2440_clk_ac97.parent = clk_p; + s3c2440_clk_cam_upll.parent = clk_upll; s3c24xx_register_clock(&s3c2440_clk_ac97); s3c24xx_register_clock(&s3c2440_clk_cam); + s3c24xx_register_clock(&s3c2440_clk_cam_upll); clk_disable(&s3c2440_clk_ac97); clk_disable(&s3c2440_clk_cam); -- cgit v1.2.3-18-g5258 From 36c64af4e013ddf44c44298f50ff138ef1e2e7b7 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 20 Mar 2006 21:00:48 +0000 Subject: [ARM] 3361/1: S3C24XX - add USB bus clock source Patch from Ben Dooks Add USB bus clock definition for 48MHz fed to OHCI and gadget cores Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/clock.c | 14 +++++++++++++- arch/arm/mach-s3c2410/clock.h | 4 ++++ arch/arm/mach-s3c2410/s3c2440-clock.c | 21 ++++++++++++++++++++- 3 files changed, 37 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c index 95c6d46c3dd..fec02c92f95 100644 --- a/arch/arm/mach-s3c2410/clock.c +++ b/arch/arm/mach-s3c2410/clock.c @@ -53,7 +53,8 @@ /* clock information */ static LIST_HEAD(clocks); -static DEFINE_MUTEX(clocks_mutex); + +DEFINE_MUTEX(clocks_mutex); /* old functions */ @@ -296,6 +297,13 @@ static struct clk clk_p = { .ctrlbit = 0, }; +struct clk clk_usb_bus = { + .name = "usb-bus", + .id = -1, + .rate = 0, + .parent = &clk_upll, +}; + /* clocks that could be registered by external code */ static int s3c24xx_dclk_enable(struct clk *clk, int enable) @@ -606,6 +614,10 @@ int __init s3c24xx_setup_clocks(unsigned long xtal, if (s3c24xx_register_clock(&clk_p) < 0) printk(KERN_ERR "failed to register cpu pclk\n"); + + if (s3c24xx_register_clock(&clk_usb_bus) < 0) + printk(KERN_ERR "failed to register usb bus clock\n"); + /* register clocks from clock array */ for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) { diff --git a/arch/arm/mach-s3c2410/clock.h b/arch/arm/mach-s3c2410/clock.h index 32864b30c1e..01bb458bf8e 100644 --- a/arch/arm/mach-s3c2410/clock.h +++ b/arch/arm/mach-s3c2410/clock.h @@ -34,11 +34,15 @@ extern struct clk s3c24xx_clkout0; extern struct clk s3c24xx_clkout1; extern struct clk s3c24xx_uclk; +extern struct clk clk_usb_bus; + /* exports for arch/arm/mach-s3c2410 * * Please DO NOT use these outside of arch/arm/mach-s3c2410 */ +extern struct mutex clocks_mutex; + extern int s3c24xx_clkcon_enable(struct clk *clk, int enable); extern int s3c24xx_register_clock(struct clk *clk); diff --git a/arch/arm/mach-s3c2410/s3c2440-clock.c b/arch/arm/mach-s3c2410/s3c2440-clock.c index 7bca0be8738..57a15974d4b 100644 --- a/arch/arm/mach-s3c2410/s3c2440-clock.c +++ b/arch/arm/mach-s3c2410/s3c2440-clock.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include @@ -111,20 +112,38 @@ static struct clk s3c2440_clk_ac97 = { static int s3c2440_clk_add(struct sys_device *sysdev) { unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); + unsigned long clkdivn; struct clk *clk_h; struct clk *clk_p; + struct clk *clk_upll; printk("S3C2440: Clock Support, DVS %s\n", (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off"); clk_p = clk_get(NULL, "pclk"); clk_h = clk_get(NULL, "hclk"); + clk_upll = clk_get(NULL, "upll"); - if (IS_ERR(clk_p) || IS_ERR(clk_h)) { + if (IS_ERR(clk_p) || IS_ERR(clk_h) || IS_ERR(clk_upll)) { printk(KERN_ERR "S3C2440: Failed to get parent clocks\n"); return -EINVAL; } + /* check rate of UPLL, and if it is near 96MHz, then change + * to using half the UPLL rate for the system */ + + if (clk_get_rate(clk_upll) > (94 * MHZ)) { + clk_usb_bus.rate = clk_get_rate(clk_upll) / 2; + + mutex_lock(&clocks_mutex); + + clkdivn = __raw_readl(S3C2410_CLKDIVN); + clkdivn |= S3C2440_CLKDIVN_UCLK; + __raw_writel(camdivn, S3C2410_CLKDIVN); + + mutex_unlock(&clocks_mutex); + } + s3c2440_clk_cam.parent = clk_h; s3c2440_clk_ac97.parent = clk_p; s3c2440_clk_cam_upll.parent = clk_upll; -- cgit v1.2.3-18-g5258 From bd20ff5793b4ece4fa3e9e0fcf8e6bbd93526215 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 20 Mar 2006 21:02:37 +0000 Subject: [ARM] 3374/1: ep93xx: gpio interrupt support Patch from Lennert Buytenhek Add GPIO interrupt support for the first 16 GPIO lines (port A and B.) Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- arch/arm/mach-ep93xx/core.c | 133 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 133 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 7d3e79990fa..865427bfad7 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -150,6 +150,26 @@ struct sys_timer ep93xx_timer = { /************************************************************************* * GPIO handling for EP93xx *************************************************************************/ +static unsigned char gpio_int_enable[2]; +static unsigned char gpio_int_type1[2]; +static unsigned char gpio_int_type2[2]; + +static void update_gpio_ab_int_params(int port) +{ + if (port == 0) { + __raw_writeb(0, EP93XX_GPIO_A_INT_ENABLE); + __raw_writeb(gpio_int_type2[0], EP93XX_GPIO_A_INT_TYPE2); + __raw_writeb(gpio_int_type1[0], EP93XX_GPIO_A_INT_TYPE1); + __raw_writeb(gpio_int_enable[0], EP93XX_GPIO_A_INT_ENABLE); + } else if (port == 1) { + __raw_writeb(0, EP93XX_GPIO_B_INT_ENABLE); + __raw_writeb(gpio_int_type2[1], EP93XX_GPIO_B_INT_TYPE2); + __raw_writeb(gpio_int_type1[1], EP93XX_GPIO_B_INT_TYPE1); + __raw_writeb(gpio_int_enable[1], EP93XX_GPIO_B_INT_ENABLE); + } +} + + static unsigned char data_register_offset[8] = { 0x00, 0x04, 0x08, 0x0c, 0x20, 0x30, 0x38, 0x40, }; @@ -169,6 +189,11 @@ void gpio_line_config(int line, int direction) local_irq_save(flags); if (direction == GPIO_OUT) { + if (line >= 0 && line < 16) { + gpio_int_enable[line >> 3] &= ~(1 << (line & 7)); + update_gpio_ab_int_params(line >> 3); + } + v = __raw_readb(data_direction_register); v |= 1 << (line & 7); __raw_writeb(v, data_direction_register); @@ -217,10 +242,118 @@ EXPORT_SYMBOL(gpio_line_set); /************************************************************************* * EP93xx IRQ handling *************************************************************************/ +static void ep93xx_gpio_ab_irq_handler(unsigned int irq, + struct irqdesc *desc, struct pt_regs *regs) +{ + unsigned char status; + int i; + + status = __raw_readb(EP93XX_GPIO_A_INT_STATUS); + for (i = 0; i < 8; i++) { + if (status & (1 << i)) { + desc = irq_desc + IRQ_EP93XX_GPIO(0) + i; + desc_handle_irq(IRQ_EP93XX_GPIO(0) + i, desc, regs); + } + } + + status = __raw_readb(EP93XX_GPIO_B_INT_STATUS); + for (i = 0; i < 8; i++) { + if (status & (1 << i)) { + desc = irq_desc + IRQ_EP93XX_GPIO(8) + i; + desc_handle_irq(IRQ_EP93XX_GPIO(8) + i, desc, regs); + } + } +} + +static void ep93xx_gpio_ab_irq_mask_ack(unsigned int irq) +{ + int line = irq - IRQ_EP93XX_GPIO(0); + int port = line >> 3; + + gpio_int_enable[port] &= ~(1 << (line & 7)); + update_gpio_ab_int_params(port); + + if (line >> 3) { + __raw_writel(1 << (line & 7), EP93XX_GPIO_B_INT_ACK); + } else { + __raw_writel(1 << (line & 7), EP93XX_GPIO_A_INT_ACK); + } +} + +static void ep93xx_gpio_ab_irq_mask(unsigned int irq) +{ + int line = irq - IRQ_EP93XX_GPIO(0); + int port = line >> 3; + + gpio_int_enable[port] &= ~(1 << (line & 7)); + update_gpio_ab_int_params(port); +} + +static void ep93xx_gpio_ab_irq_unmask(unsigned int irq) +{ + int line = irq - IRQ_EP93XX_GPIO(0); + int port = line >> 3; + + gpio_int_enable[port] |= 1 << (line & 7); + update_gpio_ab_int_params(port); +} + + +/* + * gpio_int_type1 controls whether the interrupt is level (0) or + * edge (1) triggered, while gpio_int_type2 controls whether it + * triggers on low/falling (0) or high/rising (1). + */ +static int ep93xx_gpio_ab_irq_type(unsigned int irq, unsigned int type) +{ + int port; + int line; + + line = irq - IRQ_EP93XX_GPIO(0); + gpio_line_config(line, GPIO_IN); + + port = line >> 3; + line &= 7; + + if (type & IRQT_RISING) { + gpio_int_type1[port] |= 1 << line; + gpio_int_type2[port] |= 1 << line; + } else if (type & IRQT_FALLING) { + gpio_int_type1[port] |= 1 << line; + gpio_int_type2[port] &= ~(1 << line); + } else if (type & IRQT_HIGH) { + gpio_int_type1[port] &= ~(1 << line); + gpio_int_type2[port] |= 1 << line; + } else if (type & IRQT_LOW) { + gpio_int_type1[port] &= ~(1 << line); + gpio_int_type2[port] &= ~(1 << line); + } + update_gpio_ab_int_params(port); + + return 0; +} + +static struct irqchip ep93xx_gpio_ab_irq_chip = { + .ack = ep93xx_gpio_ab_irq_mask_ack, + .mask = ep93xx_gpio_ab_irq_mask, + .unmask = ep93xx_gpio_ab_irq_unmask, + .set_type = ep93xx_gpio_ab_irq_type, +}; + + void __init ep93xx_init_irq(void) { + int irq; + vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK); vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK); + + for (irq = IRQ_EP93XX_GPIO(0) ; irq <= IRQ_EP93XX_GPIO(15); irq++) { + set_irq_chip(irq, &ep93xx_gpio_ab_irq_chip); + set_irq_handler(irq, do_level_IRQ); + set_irq_flags(irq, IRQF_VALID); + } + set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler); } -- cgit v1.2.3-18-g5258 From da956fd6b84f61bc98a18a63cdbd8190ec7b8cd0 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 20 Mar 2006 21:02:39 +0000 Subject: [ARM] 3375/1: S3C2440 - fix osiris machine build Patch from Ben Dooks Fix the build of arch/arm/mach-s3c2410/mach-osiris.c and fix the warnings from sparse. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/mach-osiris.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c2410/mach-osiris.c b/arch/arm/mach-s3c2410/mach-osiris.c index 72083e645e7..ae078755775 100644 --- a/arch/arm/mach-s3c2410/mach-osiris.c +++ b/arch/arm/mach-s3c2410/mach-osiris.c @@ -123,7 +123,7 @@ static int external_map[] = { 2 }; static int chip0_map[] = { 0 }; static int chip1_map[] = { 1 }; -struct mtd_partition osiris_default_nand_part[] = { +static struct mtd_partition osiris_default_nand_part[] = { [0] = { .name = "Boot Agent", .size = SZ_16K, @@ -249,8 +249,10 @@ static struct s3c24xx_board osiris_board __initdata = { .clocks_count = ARRAY_SIZE(osiris_clocks) }; -void __init osiris_map_io(void) +static void __init osiris_map_io(void) { + unsigned long flags; + /* initialise the clocks */ s3c24xx_dclk0.parent = NULL; @@ -272,7 +274,10 @@ void __init osiris_map_io(void) s3c24xx_set_board(&osiris_board); /* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */ + + local_irq_save(flags); __raw_writel(__raw_readl(S3C2410_BWSCON) | S3C2410_BWSCON_ST1 | S3C2410_BWSCON_ST2 | S3C2410_BWSCON_ST3 | S3C2410_BWSCON_ST4 | S3C2410_BWSCON_ST5, S3C2410_BWSCON); + local_irq_restore(flags); /* write-protect line to the NAND */ s3c2410_gpio_setpin(S3C2410_GPA0, 1); @@ -280,7 +285,6 @@ void __init osiris_map_io(void) MACHINE_START(OSIRIS, "Simtec-OSIRIS") /* Maintainer: Ben Dooks */ - .phys_ram = S3C2410_SDRAM_PA, .phys_io = S3C2410_PA_UART, .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, -- cgit v1.2.3-18-g5258 From c3d5395fd7ac5b338c701deaaddec090d3c25af9 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 20 Mar 2006 21:28:04 +0000 Subject: [ARM] 3376/2: S3C2410 - update defconfig Patch from Ben Dooks Add Simtec Osiris to the default build, and enable the USB-OHCI section by default. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/configs/s3c2410_defconfig | 147 +++++++++++++++++++++++++++++++++++-- 1 file changed, 141 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 6695b07cf1b..3cec29d56c8 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc2 -# Mon Feb 6 11:17:23 2006 +# Linux kernel version: 2.6.16 +# Mon Mar 20 20:36:02 2006 # CONFIG_ARM=y CONFIG_MMU=y @@ -12,7 +12,6 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -87,6 +86,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_IOP3XX is not set @@ -111,6 +111,7 @@ CONFIG_ARCH_S3C2410=y # S3C24XX Implementations # CONFIG_MACH_ANUBIS=y +CONFIG_MACH_OSIRIS=y CONFIG_ARCH_BAST=y CONFIG_BAST_PC104_IRQ=y CONFIG_ARCH_H1940=y @@ -175,6 +176,7 @@ CONFIG_ISA=y # # CONFIG_PREEMPT is not set # CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=200 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set CONFIG_SELECT_MEMORY_MODEL=y @@ -230,6 +232,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set # CONFIG_PACKET is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set @@ -364,7 +367,6 @@ CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_ROM=y # CONFIG_MTD_ABSENT is not set # CONFIG_MTD_OBSOLETE_CHIPS is not set -# CONFIG_MTD_XIP is not set # # Mapping drivers for chip access @@ -431,6 +433,7 @@ CONFIG_PARPORT_1284=y CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 @@ -623,7 +626,6 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set -# CONFIG_SYNCLINK_GT is not set # CONFIG_N_HDLC is not set # CONFIG_RISCOM8 is not set # CONFIG_SPECIALIX is not set @@ -686,6 +688,11 @@ CONFIG_S3C2410_WATCHDOG=y # CONFIG_PCWATCHDOG is not set # CONFIG_MIXCOMWD is not set # CONFIG_WDT is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set # CONFIG_NVRAM is not set # CONFIG_RTC is not set CONFIG_S3C2410_RTC=y @@ -750,6 +757,11 @@ CONFIG_SENSORS_EEPROM=m # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + # # Hardware Monitoring support # @@ -763,6 +775,7 @@ CONFIG_HWMON_VID=m # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set @@ -850,16 +863,138 @@ CONFIG_FONT_8x16=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_STORAGE is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_USS720 is not set + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + # # USB Gadget Support # # CONFIG_USB_GADGET is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_ZERO is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set # # MMC/SD Card support -- cgit v1.2.3-18-g5258 From 93ad79496c8831552d5f8ca7c182f149cc3cf19a Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 16 Mar 2006 11:38:16 +0000 Subject: [ARM] Oprofile: Convert semaphore to mutex op_arm_sem is being used as a mutex, so convert it to use real mutexes. Signed-off-by: Russell King --- arch/arm/oprofile/common.c | 23 ++++++++++------------- 1 file changed, 10 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c index 6f8bc1f0e6a..b57b6d11c9f 100644 --- a/arch/arm/oprofile/common.c +++ b/arch/arm/oprofile/common.c @@ -11,14 +11,14 @@ #include #include #include -#include +#include #include "op_counter.h" #include "op_arm_model.h" static struct op_arm_model_spec *op_arm_model; static int op_arm_enabled; -static struct semaphore op_arm_sem; +static DEFINE_MUTEX(op_arm_mutex); struct op_counter_config counter_config[OP_MAX_COUNTER]; @@ -57,40 +57,40 @@ static int op_arm_start(void) { int ret = -EBUSY; - down(&op_arm_sem); + mutex_lock(&op_arm_mutex); if (!op_arm_enabled) { ret = op_arm_model->start(); op_arm_enabled = !ret; } - up(&op_arm_sem); + mutex_unlock(&op_arm_mutex); return ret; } static void op_arm_stop(void) { - down(&op_arm_sem); + mutex_lock(&op_arm_mutex); if (op_arm_enabled) op_arm_model->stop(); op_arm_enabled = 0; - up(&op_arm_sem); + mutex_unlock(&op_arm_mutex); } #ifdef CONFIG_PM static int op_arm_suspend(struct sys_device *dev, pm_message_t state) { - down(&op_arm_sem); + mutex_lock(&op_arm_mutex); if (op_arm_enabled) op_arm_model->stop(); - up(&op_arm_sem); + mutex_unlock(&op_arm_mutex); return 0; } static int op_arm_resume(struct sys_device *dev) { - down(&op_arm_sem); + mutex_lock(&op_arm_mutex); if (op_arm_enabled && op_arm_model->start()) op_arm_enabled = 0; - up(&op_arm_sem); + mutex_unlock(&op_arm_mutex); return 0; } @@ -135,8 +135,6 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) #endif if (spec) { - init_MUTEX(&op_arm_sem); - ret = spec->init(); if (ret < 0) return ret; @@ -163,4 +161,3 @@ void oprofile_arch_exit(void) op_arm_model = NULL; } } - -- cgit v1.2.3-18-g5258 From ae92dc9f7bc9018f1d043f102747a1f1e4dd96fb Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 16 Mar 2006 11:32:51 +0000 Subject: [ARM] Oprofile: dynamically allocate counter_config Signed-off-by: Russell King --- arch/arm/oprofile/common.c | 11 +++++++++-- arch/arm/oprofile/op_counter.h | 2 +- 2 files changed, 10 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c index b57b6d11c9f..de72902ad0c 100644 --- a/arch/arm/oprofile/common.c +++ b/arch/arm/oprofile/common.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include @@ -20,7 +21,7 @@ static struct op_arm_model_spec *op_arm_model; static int op_arm_enabled; static DEFINE_MUTEX(op_arm_mutex); -struct op_counter_config counter_config[OP_MAX_COUNTER]; +struct op_counter_config *counter_config; static int op_arm_create_files(struct super_block *sb, struct dentry *root) { @@ -28,7 +29,7 @@ static int op_arm_create_files(struct super_block *sb, struct dentry *root) for (i = 0; i < op_arm_model->num_counters; i++) { struct dentry *dir; - char buf[2]; + char buf[4]; snprintf(buf, sizeof buf, "%d", i); dir = oprofilefs_mkdir(sb, root, buf); @@ -139,6 +140,11 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) if (ret < 0) return ret; + counter_config = kmalloc(sizeof(struct op_counter_config) * spec->num_counters, + GFP_KERNEL); + if (!counter_config) + return -ENOMEM; + op_arm_model = spec; init_driverfs(); ops->create_files = op_arm_create_files; @@ -160,4 +166,5 @@ void oprofile_arch_exit(void) exit_driverfs(); op_arm_model = NULL; } + kfree(counter_config); } diff --git a/arch/arm/oprofile/op_counter.h b/arch/arm/oprofile/op_counter.h index 153c1d467f2..8c5351d751c 100644 --- a/arch/arm/oprofile/op_counter.h +++ b/arch/arm/oprofile/op_counter.h @@ -24,6 +24,6 @@ struct op_counter_config { unsigned long user; }; -extern struct op_counter_config counter_config[]; +extern struct op_counter_config *counter_config; #endif /* OP_COUNTER_H */ -- cgit v1.2.3-18-g5258 From 58e9ff56382bdce340d50b6ff22c422dc617106c Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 20 Mar 2006 16:52:32 +0000 Subject: [ARM] Use kcalloc to allocate counter_config array rather than kmalloc We need this to be zero initialised. Since this is an array, use kcalloc rather than kzalloc or kmalloc. Signed-off-by: Russell King --- arch/arm/oprofile/common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c index de72902ad0c..6f833358cd0 100644 --- a/arch/arm/oprofile/common.c +++ b/arch/arm/oprofile/common.c @@ -140,7 +140,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) if (ret < 0) return ret; - counter_config = kmalloc(sizeof(struct op_counter_config) * spec->num_counters, + counter_config = kcalloc(spec->num_counters, sizeof(struct op_counter_config), GFP_KERNEL); if (!counter_config) return -ENOMEM; -- cgit v1.2.3-18-g5258 From c08888cf3c80fe07bfd176113c390ca31d3ba5c2 Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Mon, 20 Mar 2006 18:34:15 -0600 Subject: [PATCH] powerpc numa: fix boot_cpuid always assigned to node 0 At boot, the numa code is assigning boot_cpuid to node 0 unconditionally. Basically, numa_setup_cpu is being stupid about it, but this is the minimal fix -- just call numa_setup_cpu(boot_cpuid) later, after all nodes have been set online. Signed-off-by: Nathan Lynch Signed-off-by: Paul Mackerras --- arch/powerpc/mm/numa.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index da5280f8cf4..dc6392ce253 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -375,7 +375,7 @@ static int __init parse_numa_properties(void) { struct device_node *cpu = NULL; struct device_node *memory = NULL; - int max_domain; + int max_domain = 0; unsigned long i; if (numa_enabled == 0) { @@ -389,8 +389,6 @@ static int __init parse_numa_properties(void) if (min_common_depth < 0) return min_common_depth; - max_domain = numa_setup_cpu(boot_cpuid); - /* * Even though we connect cpus to numa domains later in SMP init, * we need to know the maximum node id now. This is because each @@ -469,6 +467,8 @@ new_range: for (i = 0; i <= max_domain; i++) node_set_online(i); + max_domain = numa_setup_cpu(boot_cpuid); + return 0; } -- cgit v1.2.3-18-g5258 From bf4b85b0e4bab42b3e8d8b0acc6851bb85e2050b Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Mon, 20 Mar 2006 18:34:45 -0600 Subject: [PATCH] powerpc numa: Minor debugging code changes Add debug statement for map_cpu_to_node; it's useful for cpu hotplug. Clarify debug statement about not finding the numa reference points property. Don't print a meaningless associativity depth (-1) on non-numa systems. Signed-off-by: Nathan Lynch Signed-off-by: Paul Mackerras --- arch/powerpc/mm/numa.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index dc6392ce253..2ae491d9404 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -133,6 +133,8 @@ static inline void map_cpu_to_node(int cpu, int node) { numa_cpu_lookup_table[cpu] = node; + dbg("adding cpu %d to node %d\n", cpu, node); + if (!(cpu_isset(cpu, numa_cpumask_lookup_table[node]))) cpu_set(cpu, numa_cpumask_lookup_table[node]); } @@ -246,8 +248,7 @@ static int __init find_min_common_depth(void) if ((len >= 1) && ref_points) { depth = ref_points[1]; } else { - dbg("WARNING: could not find NUMA " - "associativity reference point\n"); + dbg("NUMA: ibm,associativity-reference-points not found.\n"); depth = -1; } of_node_put(rtas_root); @@ -385,10 +386,11 @@ static int __init parse_numa_properties(void) min_common_depth = find_min_common_depth(); - dbg("NUMA associativity depth for CPU/Memory: %d\n", min_common_depth); if (min_common_depth < 0) return min_common_depth; + dbg("NUMA associativity depth for CPU/Memory: %d\n", min_common_depth); + /* * Even though we connect cpus to numa domains later in SMP init, * we need to know the maximum node id now. This is because each -- cgit v1.2.3-18-g5258 From 2e5ce39d6703836b583c43131c365201a76285a5 Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Mon, 20 Mar 2006 18:35:15 -0600 Subject: [PATCH] powerpc numa: Minor cpu hotplug-related cleanups map_cpu_to_node does not need to be inline, it is never called in a hot path. map_cpu_to_node, numa_setup_cpu, and find_cpu_node can be marked __cpuinit, as they are never used after boot if CONFIG_HOTPLUG_CPU=n. Signed-off-by: Nathan Lynch Signed-off-by: Paul Mackerras --- arch/powerpc/mm/numa.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 2ae491d9404..1fb11bbe1ac 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -129,7 +129,7 @@ void __init get_region(unsigned int nid, unsigned long *start_pfn, *start_pfn = 0; } -static inline void map_cpu_to_node(int cpu, int node) +static void __cpuinit map_cpu_to_node(int cpu, int node) { numa_cpu_lookup_table[cpu] = node; @@ -155,7 +155,7 @@ static void unmap_cpu_from_node(unsigned long cpu) } #endif /* CONFIG_HOTPLUG_CPU */ -static struct device_node *find_cpu_node(unsigned int cpu) +static struct device_node * __cpuinit find_cpu_node(unsigned int cpu) { unsigned int hw_cpuid = get_hard_smp_processor_id(cpu); struct device_node *cpu_node = NULL; @@ -284,7 +284,7 @@ static unsigned long __devinit read_n_cells(int n, unsigned int **buf) * Figure out to which domain a cpu belongs and stick it there. * Return the id of the domain used. */ -static int numa_setup_cpu(unsigned long lcpu) +static int __cpuinit numa_setup_cpu(unsigned long lcpu) { int numa_domain = 0; struct device_node *cpu = find_cpu_node(lcpu); -- cgit v1.2.3-18-g5258 From cf950b7af0e51935e559c54262214423e2b6c88a Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Mon, 20 Mar 2006 18:35:45 -0600 Subject: [PATCH] powerpc numa: Get rid of "numa domain" terminology Since we effectively treat the domain ids given to us by firmare as logical node ids, make this explicit (basically s/numa_domain/nid/). No functional changes, only variable and function names are modified. Signed-off-by: Nathan Lynch Signed-off-by: Paul Mackerras --- arch/powerpc/mm/numa.c | 78 +++++++++++++++++++++++++------------------------- 1 file changed, 39 insertions(+), 39 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 1fb11bbe1ac..a5286a68760 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -191,9 +191,9 @@ static int *of_get_associativity(struct device_node *dev) return (unsigned int *)get_property(dev, "ibm,associativity", NULL); } -static int of_node_numa_domain(struct device_node *device) +static int of_node_to_nid(struct device_node *device) { - int numa_domain; + int nid; unsigned int *tmp; if (min_common_depth == -1) @@ -201,13 +201,13 @@ static int of_node_numa_domain(struct device_node *device) tmp = of_get_associativity(device); if (tmp && (tmp[0] >= min_common_depth)) { - numa_domain = tmp[min_common_depth]; + nid = tmp[min_common_depth]; } else { dbg("WARNING: no NUMA information for %s\n", device->full_name); - numa_domain = 0; + nid = 0; } - return numa_domain; + return nid; } /* @@ -286,7 +286,7 @@ static unsigned long __devinit read_n_cells(int n, unsigned int **buf) */ static int __cpuinit numa_setup_cpu(unsigned long lcpu) { - int numa_domain = 0; + int nid = 0; struct device_node *cpu = find_cpu_node(lcpu); if (!cpu) { @@ -294,27 +294,27 @@ static int __cpuinit numa_setup_cpu(unsigned long lcpu) goto out; } - numa_domain = of_node_numa_domain(cpu); + nid = of_node_to_nid(cpu); - if (numa_domain >= num_online_nodes()) { + if (nid >= num_online_nodes()) { /* * POWER4 LPAR uses 0xffff as invalid node, * dont warn in this case. */ - if (numa_domain != 0xffff) + if (nid != 0xffff) printk(KERN_ERR "WARNING: cpu %ld " "maps to invalid NUMA node %d\n", - lcpu, numa_domain); - numa_domain = 0; + lcpu, nid); + nid = 0; } out: - node_set_online(numa_domain); + node_set_online(nid); - map_cpu_to_node(lcpu, numa_domain); + map_cpu_to_node(lcpu, nid); of_node_put(cpu); - return numa_domain; + return nid; } static int cpu_numa_callback(struct notifier_block *nfb, @@ -399,17 +399,17 @@ static int __init parse_numa_properties(void) * with larger node ids. In that case we force the cpu into node 0. */ for_each_cpu(i) { - int numa_domain; + int nid; cpu = find_cpu_node(i); if (cpu) { - numa_domain = of_node_numa_domain(cpu); + nid = of_node_to_nid(cpu); of_node_put(cpu); - if (numa_domain < MAX_NUMNODES && - max_domain < numa_domain) - max_domain = numa_domain; + if (nid < MAX_NUMNODES && + max_domain < nid) + max_domain = nid; } } @@ -418,7 +418,7 @@ static int __init parse_numa_properties(void) while ((memory = of_find_node_by_type(memory, "memory")) != NULL) { unsigned long start; unsigned long size; - int numa_domain; + int nid; int ranges; unsigned int *memcell_buf; unsigned int len; @@ -439,18 +439,18 @@ new_range: start = read_n_cells(n_mem_addr_cells, &memcell_buf); size = read_n_cells(n_mem_size_cells, &memcell_buf); - numa_domain = of_node_numa_domain(memory); + nid = of_node_to_nid(memory); - if (numa_domain >= MAX_NUMNODES) { - if (numa_domain != 0xffff) + if (nid >= MAX_NUMNODES) { + if (nid != 0xffff) printk(KERN_ERR "WARNING: memory at %lx maps " "to invalid NUMA node %d\n", start, - numa_domain); - numa_domain = 0; + nid); + nid = 0; } - if (max_domain < numa_domain) - max_domain = numa_domain; + if (max_domain < nid) + max_domain = nid; if (!(size = numa_enforce_memory_limit(start, size))) { if (--ranges) @@ -459,7 +459,7 @@ new_range: continue; } - add_region(numa_domain, start >> PAGE_SHIFT, + add_region(nid, start >> PAGE_SHIFT, size >> PAGE_SHIFT); if (--ranges) @@ -769,10 +769,10 @@ int hot_add_scn_to_nid(unsigned long scn_addr) { struct device_node *memory = NULL; nodemask_t nodes; - int numa_domain = 0; + int nid = 0; if (!numa_enabled || (min_common_depth < 0)) - return numa_domain; + return nid; while ((memory = of_find_node_by_type(memory, "memory")) != NULL) { unsigned long start, size; @@ -789,15 +789,15 @@ int hot_add_scn_to_nid(unsigned long scn_addr) ha_new_range: start = read_n_cells(n_mem_addr_cells, &memcell_buf); size = read_n_cells(n_mem_size_cells, &memcell_buf); - numa_domain = of_node_numa_domain(memory); + nid = of_node_to_nid(memory); /* Domains not present at boot default to 0 */ - if (!node_online(numa_domain)) - numa_domain = any_online_node(NODE_MASK_ALL); + if (!node_online(nid)) + nid = any_online_node(NODE_MASK_ALL); if ((scn_addr >= start) && (scn_addr < (start + size))) { of_node_put(memory); - goto got_numa_domain; + goto got_nid; } if (--ranges) /* process all ranges in cell */ @@ -806,12 +806,12 @@ ha_new_range: BUG(); /* section address should be found above */ /* Temporary code to ensure that returned node is not empty */ -got_numa_domain: +got_nid: nodes_setall(nodes); - while (NODE_DATA(numa_domain)->node_spanned_pages == 0) { - node_clear(numa_domain, nodes); - numa_domain = any_online_node(nodes); + while (NODE_DATA(nid)->node_spanned_pages == 0) { + node_clear(nid, nodes); + nid = any_online_node(nodes); } - return numa_domain; + return nid; } #endif /* CONFIG_MEMORY_HOTPLUG */ -- cgit v1.2.3-18-g5258 From bc16a75926941094db6b42d76014abb5e8d3a910 Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Mon, 20 Mar 2006 18:36:15 -0600 Subject: [PATCH] powerpc numa: Consolidate handling of Power4 special case Code to handle Power4's invalid node id (0xffff) is duplicated for cpu and memory. Better to handle this case in one place -- of_node_to_nid. Overall behavior should be unchanged. Signed-off-by: Nathan Lynch Signed-off-by: Paul Mackerras --- arch/powerpc/mm/numa.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index a5286a68760..dd611ef8df7 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -207,6 +207,11 @@ static int of_node_to_nid(struct device_node *device) device->full_name); nid = 0; } + + /* POWER4 LPAR uses 0xffff as invalid node */ + if (nid == 0xffff) + nid = 0; + return nid; } @@ -297,14 +302,9 @@ static int __cpuinit numa_setup_cpu(unsigned long lcpu) nid = of_node_to_nid(cpu); if (nid >= num_online_nodes()) { - /* - * POWER4 LPAR uses 0xffff as invalid node, - * dont warn in this case. - */ - if (nid != 0xffff) - printk(KERN_ERR "WARNING: cpu %ld " - "maps to invalid NUMA node %d\n", - lcpu, nid); + printk(KERN_ERR "WARNING: cpu %ld " + "maps to invalid NUMA node %d\n", + lcpu, nid); nid = 0; } out: @@ -442,10 +442,9 @@ new_range: nid = of_node_to_nid(memory); if (nid >= MAX_NUMNODES) { - if (nid != 0xffff) - printk(KERN_ERR "WARNING: memory at %lx maps " - "to invalid NUMA node %d\n", start, - nid); + printk(KERN_ERR "WARNING: memory at %lx maps " + "to invalid NUMA node %d\n", start, + nid); nid = 0; } -- cgit v1.2.3-18-g5258 From 482ec7c403d239bb4f1732faf9a14988094ce08b Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Mon, 20 Mar 2006 18:36:45 -0600 Subject: [PATCH] powerpc numa: Support sparse online node map The powerpc numa code unconditionally onlines all nodes from 0 to the highest node id found, regardless of whether cpus or memory are present in the nodes. This wastes 8K per node and complicates some cpu and memory hotplug situations, such as adding a resource that doesn't map to one of the nodes discovered at boot. Set nodes online as resources are scanned. Fall back to node 0 only when we're sure this isn't a NUMA machine. Instead of defaulting to node 0 for cases of hot-adding a resource which doesn't belong to any initialized node, assign it to the first online node. Signed-off-by: Nathan Lynch Signed-off-by: Paul Mackerras --- arch/powerpc/mm/numa.c | 95 +++++++++++++++++++++++--------------------------- 1 file changed, 43 insertions(+), 52 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index dd611ef8df7..7d6ebe3c3b9 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -191,27 +191,28 @@ static int *of_get_associativity(struct device_node *dev) return (unsigned int *)get_property(dev, "ibm,associativity", NULL); } +/* Returns nid in the range [0..MAX_NUMNODES-1], or -1 if no useful numa + * info is found. + */ static int of_node_to_nid(struct device_node *device) { - int nid; + int nid = -1; unsigned int *tmp; if (min_common_depth == -1) - return 0; + goto out; tmp = of_get_associativity(device); - if (tmp && (tmp[0] >= min_common_depth)) { + if (!tmp) + goto out; + + if (tmp[0] >= min_common_depth) nid = tmp[min_common_depth]; - } else { - dbg("WARNING: no NUMA information for %s\n", - device->full_name); - nid = 0; - } /* POWER4 LPAR uses 0xffff as invalid node */ - if (nid == 0xffff) - nid = 0; - + if (nid == 0xffff || nid >= MAX_NUMNODES) + nid = -1; +out: return nid; } @@ -301,15 +302,9 @@ static int __cpuinit numa_setup_cpu(unsigned long lcpu) nid = of_node_to_nid(cpu); - if (nid >= num_online_nodes()) { - printk(KERN_ERR "WARNING: cpu %ld " - "maps to invalid NUMA node %d\n", - lcpu, nid); - nid = 0; - } + if (nid < 0 || !node_online(nid)) + nid = any_online_node(NODE_MASK_ALL); out: - node_set_online(nid); - map_cpu_to_node(lcpu, nid); of_node_put(cpu); @@ -376,7 +371,7 @@ static int __init parse_numa_properties(void) { struct device_node *cpu = NULL; struct device_node *memory = NULL; - int max_domain = 0; + int default_nid = 0; unsigned long i; if (numa_enabled == 0) { @@ -392,25 +387,26 @@ static int __init parse_numa_properties(void) dbg("NUMA associativity depth for CPU/Memory: %d\n", min_common_depth); /* - * Even though we connect cpus to numa domains later in SMP init, - * we need to know the maximum node id now. This is because each - * node id must have NODE_DATA etc backing it. - * As a result of hotplug we could still have cpus appear later on - * with larger node ids. In that case we force the cpu into node 0. + * Even though we connect cpus to numa domains later in SMP + * init, we need to know the node ids now. This is because + * each node to be onlined must have NODE_DATA etc backing it. */ - for_each_cpu(i) { + for_each_present_cpu(i) { int nid; cpu = find_cpu_node(i); + BUG_ON(!cpu); + nid = of_node_to_nid(cpu); + of_node_put(cpu); - if (cpu) { - nid = of_node_to_nid(cpu); - of_node_put(cpu); - - if (nid < MAX_NUMNODES && - max_domain < nid) - max_domain = nid; - } + /* + * Don't fall back to default_nid yet -- we will plug + * cpus into nodes once the memory scan has discovered + * the topology. + */ + if (nid < 0) + continue; + node_set_online(nid); } get_n_mem_cells(&n_mem_addr_cells, &n_mem_size_cells); @@ -439,17 +435,15 @@ new_range: start = read_n_cells(n_mem_addr_cells, &memcell_buf); size = read_n_cells(n_mem_size_cells, &memcell_buf); + /* + * Assumption: either all memory nodes or none will + * have associativity properties. If none, then + * everything goes to default_nid. + */ nid = of_node_to_nid(memory); - - if (nid >= MAX_NUMNODES) { - printk(KERN_ERR "WARNING: memory at %lx maps " - "to invalid NUMA node %d\n", start, - nid); - nid = 0; - } - - if (max_domain < nid) - max_domain = nid; + if (nid < 0) + nid = default_nid; + node_set_online(nid); if (!(size = numa_enforce_memory_limit(start, size))) { if (--ranges) @@ -465,10 +459,7 @@ new_range: goto new_range; } - for (i = 0; i <= max_domain; i++) - node_set_online(i); - - max_domain = numa_setup_cpu(boot_cpuid); + numa_setup_cpu(boot_cpuid); return 0; } @@ -768,10 +759,10 @@ int hot_add_scn_to_nid(unsigned long scn_addr) { struct device_node *memory = NULL; nodemask_t nodes; - int nid = 0; + int default_nid = any_online_node(NODE_MASK_ALL); if (!numa_enabled || (min_common_depth < 0)) - return nid; + return default_nid; while ((memory = of_find_node_by_type(memory, "memory")) != NULL) { unsigned long start, size; @@ -791,8 +782,8 @@ ha_new_range: nid = of_node_to_nid(memory); /* Domains not present at boot default to 0 */ - if (!node_online(nid)) - nid = any_online_node(NODE_MASK_ALL); + if (nid < 0 || !node_online(nid)) + nid = default_nid; if ((scn_addr >= start) && (scn_addr < (start + size))) { of_node_put(memory); -- cgit v1.2.3-18-g5258 From 2b2612272c77288b2bd53d5831df737cd669cd93 Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Mon, 20 Mar 2006 18:37:15 -0600 Subject: [PATCH] powerpc numa: Consolidate assignment of cpus to nodes We can plug the boot cpu into its node independently of whether numa topology is detected. And numa_setup_cpu does the right thing for all cases now, so remove special-casing for non-numa from the cpu hotplug callback. Signed-off-by: Nathan Lynch Signed-off-by: Paul Mackerras --- arch/powerpc/mm/numa.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 7d6ebe3c3b9..e89b22aa539 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -321,10 +321,7 @@ static int cpu_numa_callback(struct notifier_block *nfb, switch (action) { case CPU_UP_PREPARE: - if (min_common_depth == -1 || !numa_enabled) - map_cpu_to_node(lcpu, 0); - else - numa_setup_cpu(lcpu); + numa_setup_cpu(lcpu); ret = NOTIFY_OK; break; #ifdef CONFIG_HOTPLUG_CPU @@ -459,8 +456,6 @@ new_range: goto new_range; } - numa_setup_cpu(boot_cpuid); - return 0; } @@ -475,7 +470,6 @@ static void __init setup_nonnuma(void) printk(KERN_INFO "Memory hole size: %ldMB\n", (top_of_ram - total_ram) >> 20); - map_cpu_to_node(boot_cpuid, 0); for (i = 0; i < lmb.memory.cnt; ++i) add_region(0, lmb.memory.region[i].base >> PAGE_SHIFT, lmb_size_pages(&lmb.memory, i)); @@ -612,6 +606,8 @@ void __init do_init_bootmem(void) dump_numa_memory_topology(); register_cpu_notifier(&ppc64_numa_nb); + cpu_numa_callback(&ppc64_numa_nb, CPU_UP_PREPARE, + (void *)(unsigned long)boot_cpuid); for_each_online_node(nid) { unsigned long start_pfn, end_pfn, pages_present; -- cgit v1.2.3-18-g5258 From caf80e579b5fc0048681a47c5a55487116e56a88 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 21 Mar 2006 20:45:51 +1100 Subject: [PATCH] powerpc: Unconfuse htab_bolt_mapping() callers htab_bolt_mapping() takes a vstart and pstart parameter, but all but one of its callers actually pass it vstart and vstart. Luckily before it passes paddr (calculated from paddr) to the hpte_insert routines it calls virt_to_abs() (aka. __pa()) on the address, so there isn't actually a bug. map_io_page() however does pass pstart properly, so currently it's broken AFAICT because we're calling __pa(paddr) which will get us something very large. Presumably no one's calling map_io_page() in the right context. Anyway, change htab_bolt_mapping() callers to properly pass pstart, and then use it properly in htab_bolt_mapping(), ie. don't call __pa() on it again. Booted on p5 LPAR, iSeries and Power3. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/mm/hash_utils_64.c | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 7d9ce9a4821..7b4eccffd00 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -169,7 +169,7 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend, #ifdef CONFIG_PPC_ISERIES if (_machine == PLATFORM_ISERIES_LPAR) ret = iSeries_hpte_insert(hpteg, va, - __pa(vaddr), + paddr, tmp_mode, HPTE_V_BOLTED, psize); @@ -178,7 +178,7 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend, #ifdef CONFIG_PPC_PSERIES if (_machine & PLATFORM_LPAR) ret = pSeries_lpar_hpte_insert(hpteg, va, - virt_to_abs(paddr), + paddr, tmp_mode, HPTE_V_BOLTED, psize); @@ -186,7 +186,7 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend, #endif #ifdef CONFIG_PPC_MULTIPLATFORM ret = native_hpte_insert(hpteg, va, - virt_to_abs(paddr), + paddr, tmp_mode, HPTE_V_BOLTED, psize); #endif @@ -392,7 +392,7 @@ static unsigned long __init htab_get_table_size(void) #ifdef CONFIG_MEMORY_HOTPLUG void create_section_mapping(unsigned long start, unsigned long end) { - BUG_ON(htab_bolt_mapping(start, end, start, + BUG_ON(htab_bolt_mapping(start, end, __pa(start), _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX, mmu_linear_psize)); } @@ -473,21 +473,22 @@ void __init htab_initialize(void) if (dart_tablebase != 0 && dart_tablebase >= base && dart_tablebase < (base + size)) { + unsigned long dart_table_end = dart_tablebase + 16 * MB; if (base != dart_tablebase) BUG_ON(htab_bolt_mapping(base, dart_tablebase, - base, mode_rw, - mmu_linear_psize)); - if ((base + size) > (dart_tablebase + 16*MB)) + __pa(base), mode_rw, + mmu_linear_psize)); + if ((base + size) > dart_table_end) BUG_ON(htab_bolt_mapping(dart_tablebase+16*MB, - base + size, - dart_tablebase+16*MB, + base + size, + __pa(dart_table_end), mode_rw, mmu_linear_psize)); continue; } #endif /* CONFIG_U3_DART */ - BUG_ON(htab_bolt_mapping(base, base + size, base, - mode_rw, mmu_linear_psize)); + BUG_ON(htab_bolt_mapping(base, base + size, __pa(base), + mode_rw, mmu_linear_psize)); } /* @@ -504,8 +505,8 @@ void __init htab_initialize(void) if (base + size >= tce_alloc_start) tce_alloc_start = base + size + 1; - BUG_ON(htab_bolt_mapping(tce_alloc_start, tce_alloc_end, - tce_alloc_start, mode_rw, + BUG_ON(htab_bolt_mapping(tce_alloc_start, tce_alloc_end, + __pa(tce_alloc_start), mode_rw, mmu_linear_psize)); } -- cgit v1.2.3-18-g5258 From 415202447d31d0f458cca256ad7e0ed777d993d9 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 21 Mar 2006 20:45:58 +1100 Subject: [PATCH] powerpc: Remove unused iommu_off logic from pSeries_init_early() When iommu_init_early_pSeries() was added, ages ago, we forgot to remove the code that checks /chosen/linux,iommu-off in pSeries_init_early(). We do it now in iommu_init_early_pSeries(). Signed-off-by: Michael Ellerman Acked-by: Olof Johansson Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/setup.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index b5996a7060f..149751a3742 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -320,19 +320,14 @@ static int pseries_set_xdabr(unsigned long dabr) */ static void __init pSeries_init_early(void) { - int iommu_off = 0; - DBG(" -> pSeries_init_early()\n"); fw_feature_init(); if (platform_is_lpar()) hpte_init_lpar(); - else { + else hpte_init_native(); - iommu_off = (of_chosen && - get_property(of_chosen, "linux,iommu-off", NULL)); - } if (platform_is_lpar()) find_udbg_vterm(); -- cgit v1.2.3-18-g5258 From 57cfb814f698d30894bc28e22125550193ebe549 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 21 Mar 2006 20:45:59 +1100 Subject: [PATCH] powerpc: Replace platform_is_lpar() with a firmware feature It has been decreed that platform numbers are evil, so as a step in that direction, replace platform_is_lpar() with a FW_FEATURE_LPAR bit. Currently FW_FEATURE_LPAR really means i/pSeries LPAR, in the future we might have to clean that up if we need to be more specific about what LPAR actually means. But that's another patch ... Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/mm/hash_utils_64.c | 4 ++-- arch/powerpc/oprofile/op_model_power4.c | 3 ++- arch/powerpc/platforms/iseries/setup.c | 10 +++++++--- arch/powerpc/platforms/pseries/iommu.c | 2 +- arch/powerpc/platforms/pseries/setup.c | 11 +++++++---- arch/powerpc/platforms/pseries/smp.c | 2 +- arch/powerpc/platforms/pseries/xics.c | 3 ++- 7 files changed, 22 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 7b4eccffd00..89b35c18131 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -422,7 +422,7 @@ void __init htab_initialize(void) htab_hash_mask = pteg_count - 1; - if (platform_is_lpar()) { + if (firmware_has_feature(FW_FEATURE_LPAR)) { /* Using a hypervisor which owns the htab */ htab_address = NULL; _SDR1 = 0; @@ -517,7 +517,7 @@ void __init htab_initialize(void) void htab_initialize_secondary(void) { - if (!platform_is_lpar()) + if (!firmware_has_feature(FW_FEATURE_LPAR)) mtspr(SPRN_SDR1, _SDR1); } diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c index 659a021da0c..4b06e53eb9b 100644 --- a/arch/powerpc/oprofile/op_model_power4.c +++ b/arch/powerpc/oprofile/op_model_power4.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include @@ -232,7 +233,7 @@ static unsigned long get_pc(struct pt_regs *regs) mmcra = mfspr(SPRN_MMCRA); /* Were we in the hypervisor? */ - if (platform_is_lpar() && (mmcra & MMCRA_SIHV)) + if (firmware_has_feature(FW_FEATURE_LPAR) && (mmcra & MMCRA_SIHV)) /* function descriptor madness */ return *((unsigned long *)hypervisor_bucket); diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index 3ecc4a652d8..b08c3686f90 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -303,8 +303,6 @@ static void __init iSeries_init_early(void) { DBG(" -> iSeries_init_early()\n"); - ppc64_firmware_features = FW_FEATURE_ISERIES; - ppc64_interrupt_controller = IC_ISERIES; #if defined(CONFIG_BLK_DEV_INITRD) @@ -711,7 +709,13 @@ void __init iSeries_init_IRQ(void) { } static int __init iseries_probe(int platform) { - return PLATFORM_ISERIES_LPAR == platform; + if (PLATFORM_ISERIES_LPAR != platform) + return 0; + + ppc64_firmware_features |= FW_FEATURE_ISERIES; + ppc64_firmware_features |= FW_FEATURE_LPAR; + + return 1; } struct machdep_calls __initdata iseries_md = { diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index 57930e23cc7..2643078433f 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -580,7 +580,7 @@ void iommu_init_early_pSeries(void) return; } - if (platform_is_lpar()) { + if (firmware_has_feature(FW_FEATURE_LPAR)) { if (firmware_has_feature(FW_FEATURE_MULTITCE)) { ppc_md.tce_build = tce_buildmulti_pSeriesLP; ppc_md.tce_free = tce_freemulti_pSeriesLP; diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 149751a3742..44d5c7fdcd9 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -246,7 +246,7 @@ static void __init pSeries_setup_arch(void) ppc_md.idle_loop = default_idle; } - if (platform_is_lpar()) + if (firmware_has_feature(FW_FEATURE_LPAR)) ppc_md.enable_pmcs = pseries_lpar_enable_pmcs; else ppc_md.enable_pmcs = power4_enable_pmcs; @@ -324,12 +324,12 @@ static void __init pSeries_init_early(void) fw_feature_init(); - if (platform_is_lpar()) + if (firmware_has_feature(FW_FEATURE_LPAR)) hpte_init_lpar(); else hpte_init_native(); - if (platform_is_lpar()) + if (firmware_has_feature(FW_FEATURE_LPAR)) find_udbg_vterm(); if (firmware_has_feature(FW_FEATURE_DABR)) @@ -385,6 +385,9 @@ static int __init pSeries_probe(int platform) * it here ... */ + if (platform == PLATFORM_PSERIES_LPAR) + ppc64_firmware_features |= FW_FEATURE_LPAR; + return 1; } @@ -524,7 +527,7 @@ static void pseries_shared_idle(void) static int pSeries_pci_probe_mode(struct pci_bus *bus) { - if (platform_is_lpar()) + if (firmware_has_feature(FW_FEATURE_LPAR)) return PCI_PROBE_DEVTREE; return PCI_PROBE_NORMAL; } diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index 8d710af5075..3cf78a6cd27 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -443,7 +443,7 @@ void __init smp_init_pSeries(void) smp_ops->cpu_die = pSeries_cpu_die; /* Processors can be added/removed only on LPAR */ - if (platform_is_lpar()) + if (firmware_has_feature(FW_FEATURE_LPAR)) pSeries_reconfig_notifier_register(&pSeries_smp_nb); #endif diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index fd823c7c9ac..eb86cdb9b80 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -536,7 +537,7 @@ nextnode: of_node_put(np); } - if (platform_is_lpar()) + if (firmware_has_feature(FW_FEATURE_LPAR)) ops = &pSeriesLP_ops; else { #ifdef CONFIG_SMP -- cgit v1.2.3-18-g5258 From 260de22faac4d336ca122ebd0f1e59279d0b1dfd Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 21 Mar 2006 20:46:02 +1100 Subject: [PATCH] powerpc: iseries: mf related cleanups Some cleanups in the iSeries code. - Make mf_display_progress() check mf_initialized rather than the caller. - Set mf_initialized in mf_init() rather than in setup.c - Then move mf_initialized into mf.c, the only place it's used. - Move the mf related logic from iSeries_progress() to mf_display_progress() - Use a #define to size the pending_event_prealloc array - Use that define in the initialsation loop rather than sizeof jiggery pokery - Remove stupid comment(s) - Mark stuff static and/or __init Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/iseries/mf.c | 32 +++++++++++++++++++++++--------- arch/powerpc/platforms/iseries/setup.c | 11 +---------- 2 files changed, 24 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c index a41d8b78c0c..97a26137cf4 100644 --- a/arch/powerpc/platforms/iseries/mf.c +++ b/arch/powerpc/platforms/iseries/mf.c @@ -46,6 +46,7 @@ #include "setup.h" extern int piranha_simulator; +static int mf_initialized; /* * This is the structure layout for the Machine Facilites LPAR event @@ -143,7 +144,8 @@ static spinlock_t pending_event_spinlock; static struct pending_event *pending_event_head; static struct pending_event *pending_event_tail; static struct pending_event *pending_event_avail; -static struct pending_event pending_event_prealloc[16]; +#define PENDING_EVENT_PREALLOC_LEN 16 +static struct pending_event pending_event_prealloc[PENDING_EVENT_PREALLOC_LEN]; /* * Put a pending event onto the available queue, so it can get reused. @@ -625,7 +627,7 @@ void mf_display_src(u32 word) /* * Display a single word SRC of the form "PROGXXXX" on the VSP control panel. */ -void mf_display_progress(u16 value) +static __init void mf_display_progress_src(u16 value) { u8 ce[12]; u8 src[72]; @@ -649,30 +651,42 @@ void mf_display_progress(u16 value) * Clear the VSP control panel. Used to "erase" an SRC that was * previously displayed. */ -void mf_clear_src(void) +static void mf_clear_src(void) { signal_ce_msg_simple(0x4b, NULL); } +void __init mf_display_progress(u16 value) +{ + if (piranha_simulator || !mf_initialized) + return; + + if (0xFFFF == value) + mf_clear_src(); + else + mf_display_progress_src(value); +} + /* * Initialization code here. */ -void mf_init(void) +void __init mf_init(void) { int i; - /* initialize */ spin_lock_init(&pending_event_spinlock); - for (i = 0; - i < sizeof(pending_event_prealloc) / sizeof(*pending_event_prealloc); - ++i) + + for (i = 0; i < PENDING_EVENT_PREALLOC_LEN; i++) free_pending_event(&pending_event_prealloc[i]); + HvLpEvent_registerHandler(HvLpEvent_Type_MachineFac, &hv_handler); /* virtual continue ack */ signal_ce_msg_simple(0x57, NULL); - /* initialization complete */ + mf_initialized = 1; + mb(); + printk(KERN_NOTICE "mf.c: iSeries Linux LPAR Machine Facilities " "initialized\n"); } diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index b08c3686f90..190891ce9cb 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -89,8 +89,6 @@ extern unsigned long embedded_sysmap_end; extern unsigned long iSeries_recal_tb; extern unsigned long iSeries_recal_titan; -static int mf_initialized; - static unsigned long cmd_mem_limit; struct MemoryBlock { @@ -347,8 +345,6 @@ static void __init iSeries_init_early(void) HvCallEvent_setLpEventQueueInterruptProc(0, 0); mf_init(); - mf_initialized = 1; - mb(); /* If we were passed an initrd, set the ROOT_DEV properly if the values * look sensible. If not, clear initrd reference. @@ -585,12 +581,7 @@ static void iSeries_halt(void) static void __init iSeries_progress(char * st, unsigned short code) { printk("Progress: [%04x] - %s\n", (unsigned)code, st); - if (!piranha_simulator && mf_initialized) { - if (code != 0xffff) - mf_display_progress(code); - else - mf_clear_src(); - } + mf_display_progress(code); } static void __init iSeries_fixup_klimit(void) -- cgit v1.2.3-18-g5258 From a9ea2101aaa7fe73cb352cea4145853efdabaa0d Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 21 Mar 2006 20:46:04 +1100 Subject: [PATCH] powerpc: iseries: Remove pointless iSeries_(restart|power_off|halt) These routines just call through to the mf routines, so point ppc_md straight at the mf routines. We need to pass the cmd through to mf_reboot to make it work, but that seems reasonable. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/iseries/mf.c | 2 +- arch/powerpc/platforms/iseries/setup.c | 30 +++--------------------------- 2 files changed, 4 insertions(+), 28 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c index 97a26137cf4..18054e922bd 100644 --- a/arch/powerpc/platforms/iseries/mf.c +++ b/arch/powerpc/platforms/iseries/mf.c @@ -599,7 +599,7 @@ void mf_power_off(void) * Global kernel interface to tell the VSP object in the primary * partition to reboot this partition. */ -void mf_reboot(void) +void mf_reboot(char *cmd) { printk(KERN_INFO "mf.c: Preparing to bounce...\n"); signal_ce_msg_simple(0x4e, NULL); diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index 190891ce9cb..127af3b0ba8 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -554,30 +554,6 @@ static void iSeries_show_cpuinfo(struct seq_file *m) seq_printf(m, "machine\t\t: 64-bit iSeries Logical Partition\n"); } -/* - * Document me. - */ -static void iSeries_restart(char *cmd) -{ - mf_reboot(); -} - -/* - * Document me. - */ -static void iSeries_power_off(void) -{ - mf_power_off(); -} - -/* - * Document me. - */ -static void iSeries_halt(void) -{ - mf_power_off(); -} - static void __init iSeries_progress(char * st, unsigned short code) { printk("Progress: [%04x] - %s\n", (unsigned)code, st); @@ -716,9 +692,9 @@ struct machdep_calls __initdata iseries_md = { .get_irq = iSeries_get_irq, .init_early = iSeries_init_early, .pcibios_fixup = iSeries_pci_final_fixup, - .restart = iSeries_restart, - .power_off = iSeries_power_off, - .halt = iSeries_halt, + .restart = mf_reboot, + .power_off = mf_power_off, + .halt = mf_power_off, .get_boot_time = iSeries_get_boot_time, .set_rtc_time = iSeries_set_rtc_time, .get_rtc_time = iSeries_get_rtc_time, -- cgit v1.2.3-18-g5258 From 00611c5cfc8dea0914c65134f62948a484780a30 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 21 Mar 2006 20:46:05 +1100 Subject: [PATCH] powerpc: iseries: Make more stuff static in platforms/iseries/mf.c Make mf_get_rtc(), mf_get_boot_rtc() and mf_set_rtc() static, cause they can be. We need to move mf_set_rtc() to avoid a forward declaration. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/iseries/mf.c | 78 ++++++++++++++++++------------------- 1 file changed, 39 insertions(+), 39 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c index 18054e922bd..d771b8ee857 100644 --- a/arch/powerpc/platforms/iseries/mf.c +++ b/arch/powerpc/platforms/iseries/mf.c @@ -706,6 +706,43 @@ static void get_rtc_time_complete(void *token, struct ce_msg_data *ce_msg) complete(&rtc->com); } +static int mf_set_rtc(struct rtc_time *tm) +{ + char ce_time[12]; + u8 day, mon, hour, min, sec, y1, y2; + unsigned year; + + year = 1900 + tm->tm_year; + y1 = year / 100; + y2 = year % 100; + + sec = tm->tm_sec; + min = tm->tm_min; + hour = tm->tm_hour; + day = tm->tm_mday; + mon = tm->tm_mon + 1; + + BIN_TO_BCD(sec); + BIN_TO_BCD(min); + BIN_TO_BCD(hour); + BIN_TO_BCD(mon); + BIN_TO_BCD(day); + BIN_TO_BCD(y1); + BIN_TO_BCD(y2); + + memset(ce_time, 0, sizeof(ce_time)); + ce_time[3] = 0x41; + ce_time[4] = y1; + ce_time[5] = y2; + ce_time[6] = sec; + ce_time[7] = min; + ce_time[8] = hour; + ce_time[10] = day; + ce_time[11] = mon; + + return signal_ce_msg(ce_time, NULL); +} + static int rtc_set_tm(int rc, u8 *ce_msg, struct rtc_time *tm) { tm->tm_wday = 0; @@ -761,7 +798,7 @@ static int rtc_set_tm(int rc, u8 *ce_msg, struct rtc_time *tm) return 0; } -int mf_get_rtc(struct rtc_time *tm) +static int mf_get_rtc(struct rtc_time *tm) { struct ce_msg_comp_data ce_complete; struct rtc_time_data rtc_data; @@ -794,7 +831,7 @@ static void get_boot_rtc_time_complete(void *token, struct ce_msg_data *ce_msg) rtc->busy = 0; } -int mf_get_boot_rtc(struct rtc_time *tm) +static int mf_get_boot_rtc(struct rtc_time *tm) { struct ce_msg_comp_data ce_complete; struct boot_rtc_time_data rtc_data; @@ -816,43 +853,6 @@ int mf_get_boot_rtc(struct rtc_time *tm) return rtc_set_tm(rtc_data.rc, rtc_data.ce_msg.ce_msg, tm); } -int mf_set_rtc(struct rtc_time *tm) -{ - char ce_time[12]; - u8 day, mon, hour, min, sec, y1, y2; - unsigned year; - - year = 1900 + tm->tm_year; - y1 = year / 100; - y2 = year % 100; - - sec = tm->tm_sec; - min = tm->tm_min; - hour = tm->tm_hour; - day = tm->tm_mday; - mon = tm->tm_mon + 1; - - BIN_TO_BCD(sec); - BIN_TO_BCD(min); - BIN_TO_BCD(hour); - BIN_TO_BCD(mon); - BIN_TO_BCD(day); - BIN_TO_BCD(y1); - BIN_TO_BCD(y2); - - memset(ce_time, 0, sizeof(ce_time)); - ce_time[3] = 0x41; - ce_time[4] = y1; - ce_time[5] = y2; - ce_time[6] = sec; - ce_time[7] = min; - ce_time[8] = hour; - ce_time[10] = day; - ce_time[11] = mon; - - return signal_ce_msg(ce_time, NULL); -} - #ifdef CONFIG_PROC_FS static int proc_mf_dump_cmdline(char *page, char **start, off_t off, -- cgit v1.2.3-18-g5258 From 584fc6d111c34a9a2512f6c7652dff29232bf70d Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 21 Mar 2006 20:46:08 +1100 Subject: [PATCH] powerpc: Add strne2a() to convert a string from EBCDIC to ASCII Add strne2a() which converts a string from EBCDIC to ASCII. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/lib/e2a.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/lib/e2a.c b/arch/powerpc/lib/e2a.c index 4f88f4cc21e..4b72ed8fd50 100644 --- a/arch/powerpc/lib/e2a.c +++ b/arch/powerpc/lib/e2a.c @@ -103,4 +103,14 @@ unsigned char e2a(unsigned char x) } EXPORT_SYMBOL(e2a); +unsigned char* strne2a(unsigned char *dest, const unsigned char *src, size_t n) +{ + int i; + + n = strnlen(src, n); + for (i = 0; i < n; i++) + dest[i] = e2a(src[i]); + + return dest; +} -- cgit v1.2.3-18-g5258 From 289f1c74a9b527a816f63092e79a5412cc0352a2 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 21 Mar 2006 20:46:09 +1100 Subject: [PATCH] powerpc: iseries: Add /system-id, /model and /compatible Add /system-id, /model and /compatible to the iSeries device tree. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/iseries/setup.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index 127af3b0ba8..8fe7237bc46 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -50,6 +50,7 @@ #include #include #include +#include #include #include #include @@ -888,6 +889,24 @@ void dt_cpus(struct iseries_flat_dt *dt) dt_end_node(dt); } +void dt_model(struct iseries_flat_dt *dt) +{ + char buf[16] = "IBM,"; + + /* "IBM," + mfgId[2:3] + systemSerial[1:5] */ + strne2a(buf + 4, xItExtVpdPanel.mfgID + 2, 2); + strne2a(buf + 6, xItExtVpdPanel.systemSerial + 1, 5); + buf[11] = '\0'; + dt_prop_str(dt, "system-id", buf); + + /* "IBM," + machineType[0:4] */ + strne2a(buf + 4, xItExtVpdPanel.machineType, 4); + buf[8] = '\0'; + dt_prop_str(dt, "model", buf); + + dt_prop_str(dt, "compatible", "IBM,iSeries"); +} + void build_flat_dt(struct iseries_flat_dt *dt, unsigned long phys_mem_size) { u64 tmp[2]; @@ -898,6 +917,7 @@ void build_flat_dt(struct iseries_flat_dt *dt, unsigned long phys_mem_size) dt_prop_u32(dt, "#address-cells", 2); dt_prop_u32(dt, "#size-cells", 2); + dt_model(dt); /* /memory */ dt_start_node(dt, "memory@0"); -- cgit v1.2.3-18-g5258 From 6c600ad8da189aebe65b765fd0349ef6c9dd8c1f Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 21 Mar 2006 20:46:10 +1100 Subject: [PATCH] powerpc: iseries: Add bootargs to /chosen Add the command line args to the device tree as /chosen/bootargs. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/iseries/setup.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index 8fe7237bc46..fa4550611c1 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -931,6 +931,7 @@ void build_flat_dt(struct iseries_flat_dt *dt, unsigned long phys_mem_size) /* /chosen */ dt_start_node(dt, "chosen"); dt_prop_u32(dt, "linux,platform", PLATFORM_ISERIES_LPAR); + dt_prop_str(dt, "bootargs", cmd_line); if (cmd_mem_limit) dt_prop_u64(dt, "linux,memory-limit", cmd_mem_limit); dt_end_node(dt); -- cgit v1.2.3-18-g5258 From f8642ebee8e46d054d83828a4048fba4ebcd8f68 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 21 Mar 2006 20:46:11 +1100 Subject: [PATCH] powerpc: Remove calculation of io hole In mm_init_ppc64() we calculate the location of the "IO hole", but then no one ever looks at the value. So don't bother. That's actually all mm_init_ppc64() does, so get rid of it too. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/setup_64.c | 2 -- arch/powerpc/mm/init_64.c | 48 ------------------------------------------ 2 files changed, 50 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index f96c49b03ba..2f3fdad3559 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -497,8 +497,6 @@ void __init setup_system(void) #endif printk("-----------------------------------------------------\n"); - mm_init_ppc64(); - DBG(" <- setup_system()\n"); } diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index 81cfb0c2ec5..5d4733d6180 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -84,54 +84,6 @@ /* max amount of RAM to use */ unsigned long __max_memory; -/* info on what we think the IO hole is */ -unsigned long io_hole_start; -unsigned long io_hole_size; - -/* - * Do very early mm setup. - */ -void __init mm_init_ppc64(void) -{ -#ifndef CONFIG_PPC_ISERIES - unsigned long i; -#endif - - ppc64_boot_msg(0x100, "MM Init"); - - /* This is the story of the IO hole... please, keep seated, - * unfortunately, we are out of oxygen masks at the moment. - * So we need some rough way to tell where your big IO hole - * is. On pmac, it's between 2G and 4G, on POWER3, it's around - * that area as well, on POWER4 we don't have one, etc... - * We need that as a "hint" when sizing the TCE table on POWER3 - * So far, the simplest way that seem work well enough for us it - * to just assume that the first discontinuity in our physical - * RAM layout is the IO hole. That may not be correct in the future - * (and isn't on iSeries but then we don't care ;) - */ - -#ifndef CONFIG_PPC_ISERIES - for (i = 1; i < lmb.memory.cnt; i++) { - unsigned long base, prevbase, prevsize; - - prevbase = lmb.memory.region[i-1].base; - prevsize = lmb.memory.region[i-1].size; - base = lmb.memory.region[i].base; - if (base > (prevbase + prevsize)) { - io_hole_start = prevbase + prevsize; - io_hole_size = base - (prevbase + prevsize); - break; - } - } -#endif /* CONFIG_PPC_ISERIES */ - if (io_hole_start) - printk("IO Hole assumed to be %lx -> %lx\n", - io_hole_start, io_hole_start + io_hole_size - 1); - - ppc64_boot_msg(0x100, "MM Init Done"); -} - void free_initmem(void) { unsigned long addr; -- cgit v1.2.3-18-g5258 From 14778d9072e53d2171f66ffd9657daff41acfaed Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 21 Mar 2006 02:29:39 -0800 Subject: [SPARC]: Respect vm_page_prot in io_remap_page_range(). Make sure the callers do a pgprot_noncached() on vma->vm_page_prot. Pointed out by Hugh Dickens. Signed-off-by: David S. Miller --- arch/sparc/mm/generic.c | 1 - arch/sparc/mm/loadmmu.c | 2 -- arch/sparc/mm/srmmu.c | 9 ++++++++- arch/sparc/mm/sun4c.c | 15 ++++++++++++--- arch/sparc64/kernel/pci.c | 2 +- arch/sparc64/mm/generic.c | 1 - 6 files changed, 21 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/sparc/mm/generic.c b/arch/sparc/mm/generic.c index 2cb0728cee0..1ef7fa03fef 100644 --- a/arch/sparc/mm/generic.c +++ b/arch/sparc/mm/generic.c @@ -76,7 +76,6 @@ int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from, vma->vm_pgoff = (offset >> PAGE_SHIFT) | ((unsigned long)space << 28UL); - prot = __pgprot(pg_iobits); offset -= from; dir = pgd_offset(mm, from); flush_cache_range(vma, beg, end); diff --git a/arch/sparc/mm/loadmmu.c b/arch/sparc/mm/loadmmu.c index e9f9571601b..36b4d24988f 100644 --- a/arch/sparc/mm/loadmmu.c +++ b/arch/sparc/mm/loadmmu.c @@ -22,8 +22,6 @@ struct ctx_list *ctx_list_pool; struct ctx_list ctx_free; struct ctx_list ctx_used; -unsigned int pg_iobits; - extern void ld_mmu_sun4c(void); extern void ld_mmu_srmmu(void); diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c index c664b962987..27b0e0ba858 100644 --- a/arch/sparc/mm/srmmu.c +++ b/arch/sparc/mm/srmmu.c @@ -2130,6 +2130,13 @@ static unsigned long srmmu_pte_to_pgoff(pte_t pte) return pte_val(pte) >> SRMMU_PTE_FILE_SHIFT; } +static pgprot_t srmmu_pgprot_noncached(pgprot_t prot) +{ + prot &= ~__pgprot(SRMMU_CACHE); + + return prot; +} + /* Load up routines and constants for sun4m and sun4d mmu */ void __init ld_mmu_srmmu(void) { @@ -2150,9 +2157,9 @@ void __init ld_mmu_srmmu(void) BTFIXUPSET_INT(page_readonly, pgprot_val(SRMMU_PAGE_RDONLY)); BTFIXUPSET_INT(page_kernel, pgprot_val(SRMMU_PAGE_KERNEL)); page_kernel = pgprot_val(SRMMU_PAGE_KERNEL); - pg_iobits = SRMMU_VALID | SRMMU_WRITE | SRMMU_REF; /* Functions */ + BTFIXUPSET_CALL(pgprot_noncached, srmmu_pgprot_noncached, BTFIXUPCALL_NORM); #ifndef CONFIG_SMP BTFIXUPSET_CALL(___xchg32, ___xchg32_sun4md, BTFIXUPCALL_SWAPG1G2); #endif diff --git a/arch/sparc/mm/sun4c.c b/arch/sparc/mm/sun4c.c index 731f19603ca..49f28c1bdc6 100644 --- a/arch/sparc/mm/sun4c.c +++ b/arch/sparc/mm/sun4c.c @@ -1589,7 +1589,10 @@ static void sun4c_flush_tlb_page(struct vm_area_struct *vma, unsigned long page) static inline void sun4c_mapioaddr(unsigned long physaddr, unsigned long virt_addr) { - unsigned long page_entry; + unsigned long page_entry, pg_iobits; + + pg_iobits = _SUN4C_PAGE_PRESENT | _SUN4C_READABLE | _SUN4C_WRITEABLE | + _SUN4C_PAGE_IO | _SUN4C_PAGE_NOCACHE; page_entry = ((physaddr >> PAGE_SHIFT) & SUN4C_PFN_MASK); page_entry |= ((pg_iobits | _SUN4C_PAGE_PRIV) & ~(_SUN4C_PAGE_PRESENT)); @@ -2134,6 +2137,13 @@ void __init sun4c_paging_init(void) printk("SUN4C: %d mmu entries for the kernel\n", cnt); } +static pgprot_t sun4c_pgprot_noncached(pgprot_t prot) +{ + prot |= __pgprot(_SUN4C_PAGE_IO | _SUN4C_PAGE_NOCACHE); + + return prot; +} + /* Load up routines and constants for sun4c mmu */ void __init ld_mmu_sun4c(void) { @@ -2156,10 +2166,9 @@ void __init ld_mmu_sun4c(void) BTFIXUPSET_INT(page_readonly, pgprot_val(SUN4C_PAGE_READONLY)); BTFIXUPSET_INT(page_kernel, pgprot_val(SUN4C_PAGE_KERNEL)); page_kernel = pgprot_val(SUN4C_PAGE_KERNEL); - pg_iobits = _SUN4C_PAGE_PRESENT | _SUN4C_READABLE | _SUN4C_WRITEABLE | - _SUN4C_PAGE_IO | _SUN4C_PAGE_NOCACHE; /* Functions */ + BTFIXUPSET_CALL(pgprot_noncached, sun4c_pgprot_noncached, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(___xchg32, ___xchg32_sun4c, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(do_check_pgt_cache, sun4c_check_pgt_cache, BTFIXUPCALL_NORM); diff --git a/arch/sparc64/kernel/pci.c b/arch/sparc64/kernel/pci.c index 95ffa941862..dfccff29e18 100644 --- a/arch/sparc64/kernel/pci.c +++ b/arch/sparc64/kernel/pci.c @@ -656,6 +656,7 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, __pci_mmap_set_flags(dev, vma, mmap_state); __pci_mmap_set_pgprot(dev, vma, mmap_state); + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); ret = io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, vma->vm_end - vma->vm_start, @@ -663,7 +664,6 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, if (ret) return ret; - vma->vm_flags |= VM_IO; return 0; } diff --git a/arch/sparc64/mm/generic.c b/arch/sparc64/mm/generic.c index 5fc5c579e35..8cb06205d26 100644 --- a/arch/sparc64/mm/generic.c +++ b/arch/sparc64/mm/generic.c @@ -140,7 +140,6 @@ int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from, vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP; vma->vm_pgoff = phys_base >> PAGE_SHIFT; - prot = __pgprot(pg_iobits); offset -= from; dir = pgd_offset(mm, from); flush_cache_range(vma, beg, end); -- cgit v1.2.3-18-g5258 From dcc1e8dd88d4bc55e32a26dad7633d20ffe606d2 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 22 Mar 2006 00:49:59 -0800 Subject: [SPARC64]: Add a secondary TSB for hugepage mappings. Signed-off-by: David S. Miller --- arch/sparc64/Kconfig | 4 +- arch/sparc64/kernel/sun4v_tlb_miss.S | 39 +++--- arch/sparc64/kernel/traps.c | 21 +++- arch/sparc64/kernel/tsb.S | 210 +++++++++++++++++++++++-------- arch/sparc64/mm/fault.c | 15 ++- arch/sparc64/mm/hugetlbpage.c | 28 +++-- arch/sparc64/mm/init.c | 21 +++- arch/sparc64/mm/tsb.c | 234 ++++++++++++++++++++++------------- 8 files changed, 401 insertions(+), 171 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig index c3685b314d7..267afddf63c 100644 --- a/arch/sparc64/Kconfig +++ b/arch/sparc64/Kconfig @@ -175,11 +175,11 @@ config HUGETLB_PAGE_SIZE_4MB bool "4MB" config HUGETLB_PAGE_SIZE_512K - depends on !SPARC64_PAGE_SIZE_4MB + depends on !SPARC64_PAGE_SIZE_4MB && !SPARC64_PAGE_SIZE_512KB bool "512K" config HUGETLB_PAGE_SIZE_64K - depends on !SPARC64_PAGE_SIZE_4MB && !SPARC64_PAGE_SIZE_512KB + depends on !SPARC64_PAGE_SIZE_4MB && !SPARC64_PAGE_SIZE_512KB && !SPARC64_PAGE_SIZE_64K bool "64K" endchoice diff --git a/arch/sparc64/kernel/sun4v_tlb_miss.S b/arch/sparc64/kernel/sun4v_tlb_miss.S index ab23ddb7116..b731881224e 100644 --- a/arch/sparc64/kernel/sun4v_tlb_miss.S +++ b/arch/sparc64/kernel/sun4v_tlb_miss.S @@ -29,15 +29,15 @@ * * index_mask = (512 << (tsb_reg & 0x7UL)) - 1UL; * tsb_base = tsb_reg & ~0x7UL; - * tsb_index = ((vaddr >> PAGE_SHIFT) & tsb_mask); + * tsb_index = ((vaddr >> HASH_SHIFT) & tsb_mask); * tsb_ptr = tsb_base + (tsb_index * 16); */ -#define COMPUTE_TSB_PTR(TSB_PTR, VADDR, TMP1, TMP2) \ +#define COMPUTE_TSB_PTR(TSB_PTR, VADDR, HASH_SHIFT, TMP1, TMP2) \ and TSB_PTR, 0x7, TMP1; \ mov 512, TMP2; \ andn TSB_PTR, 0x7, TSB_PTR; \ sllx TMP2, TMP1, TMP2; \ - srlx VADDR, PAGE_SHIFT, TMP1; \ + srlx VADDR, HASH_SHIFT, TMP1; \ sub TMP2, 1, TMP2; \ and TMP1, TMP2, TMP1; \ sllx TMP1, 4, TMP1; \ @@ -53,7 +53,7 @@ sun4v_itlb_miss: LOAD_ITLB_INFO(%g2, %g4, %g5) COMPUTE_TAG_TARGET(%g6, %g4, %g5, kvmap_itlb_4v) - COMPUTE_TSB_PTR(%g1, %g4, %g3, %g7) + COMPUTE_TSB_PTR(%g1, %g4, PAGE_SHIFT, %g3, %g7) /* Load TSB tag/pte into %g2/%g3 and compare the tag. */ ldda [%g1] ASI_QUAD_LDD_PHYS_4V, %g2 @@ -99,7 +99,7 @@ sun4v_dtlb_miss: LOAD_DTLB_INFO(%g2, %g4, %g5) COMPUTE_TAG_TARGET(%g6, %g4, %g5, kvmap_dtlb_4v) - COMPUTE_TSB_PTR(%g1, %g4, %g3, %g7) + COMPUTE_TSB_PTR(%g1, %g4, PAGE_SHIFT, %g3, %g7) /* Load TSB tag/pte into %g2/%g3 and compare the tag. */ ldda [%g1] ASI_QUAD_LDD_PHYS_4V, %g2 @@ -171,21 +171,26 @@ sun4v_dtsb_miss: /* fallthrough */ - /* Create TSB pointer into %g1. This is something like: - * - * index_mask = (512 << (tsb_reg & 0x7UL)) - 1UL; - * tsb_base = tsb_reg & ~0x7UL; - * tsb_index = ((vaddr >> PAGE_SHIFT) & tsb_mask); - * tsb_ptr = tsb_base + (tsb_index * 16); - */ sun4v_tsb_miss_common: - COMPUTE_TSB_PTR(%g1, %g4, %g5, %g7) + COMPUTE_TSB_PTR(%g1, %g4, PAGE_SHIFT, %g5, %g7) - /* Branch directly to page table lookup. We have SCRATCHPAD_MMU_MISS - * still in %g2, so it's quite trivial to get at the PGD PHYS value - * so we can preload it into %g7. - */ sub %g2, TRAP_PER_CPU_FAULT_INFO, %g2 + +#ifdef CONFIG_HUGETLB_PAGE + mov SCRATCHPAD_UTSBREG2, %g5 + ldxa [%g5] ASI_SCRATCHPAD, %g5 + cmp %g5, -1 + be,pt %xcc, 80f + nop + COMPUTE_TSB_PTR(%g5, %g4, HPAGE_SHIFT, %g2, %g7) + + /* That clobbered %g2, reload it. */ + ldxa [%g0] ASI_SCRATCHPAD, %g2 + sub %g2, TRAP_PER_CPU_FAULT_INFO, %g2 + +80: stx %g5, [%g2 + TRAP_PER_CPU_TSB_HUGE_TEMP] +#endif + ba,pt %xcc, tsb_miss_page_table_walk_sun4v_fastpath ldx [%g2 + TRAP_PER_CPU_PGD_PADDR], %g7 diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c index 7f7dba0ca96..df612e4f75f 100644 --- a/arch/sparc64/kernel/traps.c +++ b/arch/sparc64/kernel/traps.c @@ -2482,6 +2482,7 @@ void init_cur_cpu_trap(struct thread_info *t) extern void thread_info_offsets_are_bolixed_dave(void); extern void trap_per_cpu_offsets_are_bolixed_dave(void); +extern void tsb_config_offsets_are_bolixed_dave(void); /* Only invoked on boot processor. */ void __init trap_init(void) @@ -2535,9 +2536,27 @@ void __init trap_init(void) (TRAP_PER_CPU_CPU_MONDO_BLOCK_PA != offsetof(struct trap_per_cpu, cpu_mondo_block_pa)) || (TRAP_PER_CPU_CPU_LIST_PA != - offsetof(struct trap_per_cpu, cpu_list_pa))) + offsetof(struct trap_per_cpu, cpu_list_pa)) || + (TRAP_PER_CPU_TSB_HUGE != + offsetof(struct trap_per_cpu, tsb_huge)) || + (TRAP_PER_CPU_TSB_HUGE_TEMP != + offsetof(struct trap_per_cpu, tsb_huge_temp))) trap_per_cpu_offsets_are_bolixed_dave(); + if ((TSB_CONFIG_TSB != + offsetof(struct tsb_config, tsb)) || + (TSB_CONFIG_RSS_LIMIT != + offsetof(struct tsb_config, tsb_rss_limit)) || + (TSB_CONFIG_NENTRIES != + offsetof(struct tsb_config, tsb_nentries)) || + (TSB_CONFIG_REG_VAL != + offsetof(struct tsb_config, tsb_reg_val)) || + (TSB_CONFIG_MAP_VADDR != + offsetof(struct tsb_config, tsb_map_vaddr)) || + (TSB_CONFIG_MAP_PTE != + offsetof(struct tsb_config, tsb_map_pte))) + tsb_config_offsets_are_bolixed_dave(); + /* Attach to the address space of init_task. On SMP we * do this in smp.c:smp_callin for other cpus. */ diff --git a/arch/sparc64/kernel/tsb.S b/arch/sparc64/kernel/tsb.S index 118baea44f6..a0c8ba58920 100644 --- a/arch/sparc64/kernel/tsb.S +++ b/arch/sparc64/kernel/tsb.S @@ -3,8 +3,13 @@ * Copyright (C) 2006 David S. Miller */ +#include + #include #include +#include +#include +#include .text .align 32 @@ -34,34 +39,124 @@ tsb_miss_itlb: ldxa [%g4] ASI_IMMU, %g4 /* At this point we have: - * %g1 -- TSB entry address + * %g1 -- PAGE_SIZE TSB entry address * %g3 -- FAULT_CODE_{D,I}TLB * %g4 -- missing virtual address * %g6 -- TAG TARGET (vaddr >> 22) */ tsb_miss_page_table_walk: - TRAP_LOAD_PGD_PHYS(%g7, %g5) + TRAP_LOAD_TRAP_BLOCK(%g7, %g5) - /* And now we have the PGD base physical address in %g7. */ -tsb_miss_page_table_walk_sun4v_fastpath: - USER_PGTABLE_WALK_TL1(%g4, %g7, %g5, %g2, tsb_do_fault) + /* Before committing to a full page table walk, + * check the huge page TSB. + */ +#ifdef CONFIG_HUGETLB_PAGE + +661: ldx [%g7 + TRAP_PER_CPU_TSB_HUGE], %g5 + nop + .section .sun4v_2insn_patch, "ax" + .word 661b + mov SCRATCHPAD_UTSBREG2, %g5 + ldxa [%g5] ASI_SCRATCHPAD, %g5 + .previous + + cmp %g5, -1 + be,pt %xcc, 80f + nop + + /* We need an aligned pair of registers containing 2 values + * which can be easily rematerialized. %g6 and %g7 foot the + * bill just nicely. We'll save %g6 away into %g2 for the + * huge page TSB TAG comparison. + * + * Perform a huge page TSB lookup. + */ + mov %g6, %g2 + and %g5, 0x7, %g6 + mov 512, %g7 + andn %g5, 0x7, %g5 + sllx %g7, %g6, %g7 + srlx %g4, HPAGE_SHIFT, %g6 + sub %g7, 1, %g7 + and %g6, %g7, %g6 + sllx %g6, 4, %g6 + add %g5, %g6, %g5 + + TSB_LOAD_QUAD(%g5, %g6) + cmp %g6, %g2 + be,a,pt %xcc, tsb_tlb_reload + mov %g7, %g5 + + /* No match, remember the huge page TSB entry address, + * and restore %g6 and %g7. + */ + TRAP_LOAD_TRAP_BLOCK(%g7, %g6) + srlx %g4, 22, %g6 +80: stx %g5, [%g7 + TRAP_PER_CPU_TSB_HUGE_TEMP] + +#endif + + ldx [%g7 + TRAP_PER_CPU_PGD_PADDR], %g7 /* At this point we have: * %g1 -- TSB entry address * %g3 -- FAULT_CODE_{D,I}TLB - * %g5 -- physical address of PTE in Linux page tables + * %g4 -- missing virtual address * %g6 -- TAG TARGET (vaddr >> 22) + * %g7 -- page table physical address + * + * We know that both the base PAGE_SIZE TSB and the HPAGE_SIZE + * TSB both lack a matching entry. */ -tsb_reload: - TSB_LOCK_TAG(%g1, %g2, %g7) +tsb_miss_page_table_walk_sun4v_fastpath: + USER_PGTABLE_WALK_TL1(%g4, %g7, %g5, %g2, tsb_do_fault) /* Load and check PTE. */ ldxa [%g5] ASI_PHYS_USE_EC, %g5 - mov 1, %g7 - sllx %g7, TSB_TAG_INVALID_BIT, %g7 - brgez,a,pn %g5, tsb_do_fault - TSB_STORE(%g1, %g7) + brgez,pn %g5, tsb_do_fault + nop + +#ifdef CONFIG_HUGETLB_PAGE +661: sethi %uhi(_PAGE_SZALL_4U), %g7 + sllx %g7, 32, %g7 + .section .sun4v_2insn_patch, "ax" + .word 661b + mov _PAGE_SZALL_4V, %g7 + nop + .previous + + and %g5, %g7, %g2 + +661: sethi %uhi(_PAGE_SZHUGE_4U), %g7 + sllx %g7, 32, %g7 + .section .sun4v_2insn_patch, "ax" + .word 661b + mov _PAGE_SZHUGE_4V, %g7 + nop + .previous + + cmp %g2, %g7 + bne,pt %xcc, 60f + nop + + /* It is a huge page, use huge page TSB entry address we + * calculated above. + */ + TRAP_LOAD_TRAP_BLOCK(%g7, %g2) + ldx [%g7 + TRAP_PER_CPU_TSB_HUGE_TEMP], %g2 + cmp %g2, -1 + movne %xcc, %g2, %g1 +60: +#endif + /* At this point we have: + * %g1 -- TSB entry address + * %g3 -- FAULT_CODE_{D,I}TLB + * %g5 -- valid PTE + * %g6 -- TAG TARGET (vaddr >> 22) + */ +tsb_reload: + TSB_LOCK_TAG(%g1, %g2, %g7) TSB_WRITE(%g1, %g5, %g6) /* Finally, load TLB and return from trap. */ @@ -240,10 +335,9 @@ tsb_flush: * schedule() time. * * %o0: page table physical address - * %o1: TSB register value - * %o2: TSB virtual address - * %o3: TSB mapping locked PTE - * %o4: Hypervisor TSB descriptor physical address + * %o1: TSB base config pointer + * %o2: TSB huge config pointer, or NULL if none + * %o3: Hypervisor TSB descriptor physical address * * We have to run this whole thing with interrupts * disabled so that the current cpu doesn't change @@ -253,63 +347,79 @@ tsb_flush: .globl __tsb_context_switch .type __tsb_context_switch,#function __tsb_context_switch: - rdpr %pstate, %o5 - wrpr %o5, PSTATE_IE, %pstate + rdpr %pstate, %g1 + wrpr %g1, PSTATE_IE, %pstate + + TRAP_LOAD_TRAP_BLOCK(%g2, %g3) - ldub [%g6 + TI_CPU], %g1 - sethi %hi(trap_block), %g2 - sllx %g1, TRAP_BLOCK_SZ_SHIFT, %g1 - or %g2, %lo(trap_block), %g2 - add %g2, %g1, %g2 stx %o0, [%g2 + TRAP_PER_CPU_PGD_PADDR] - sethi %hi(tlb_type), %g1 - lduw [%g1 + %lo(tlb_type)], %g1 - cmp %g1, 3 - bne,pt %icc, 1f + ldx [%o1 + TSB_CONFIG_REG_VAL], %o0 + brz,pt %o2, 1f + mov -1, %g3 + + ldx [%o2 + TSB_CONFIG_REG_VAL], %g3 + +1: stx %g3, [%g2 + TRAP_PER_CPU_TSB_HUGE] + + sethi %hi(tlb_type), %g2 + lduw [%g2 + %lo(tlb_type)], %g2 + cmp %g2, 3 + bne,pt %icc, 50f nop /* Hypervisor TSB switch. */ - mov SCRATCHPAD_UTSBREG1, %g1 - stxa %o1, [%g1] ASI_SCRATCHPAD - mov -1, %g2 - mov SCRATCHPAD_UTSBREG2, %g1 - stxa %g2, [%g1] ASI_SCRATCHPAD - - /* Save away %o5's %pstate, we have to use %o5 for - * the hypervisor call. - */ - mov %o5, %g1 + mov SCRATCHPAD_UTSBREG1, %o5 + stxa %o0, [%o5] ASI_SCRATCHPAD + mov SCRATCHPAD_UTSBREG2, %o5 + stxa %g3, [%o5] ASI_SCRATCHPAD + + mov 2, %o0 + cmp %g3, -1 + move %xcc, 1, %o0 mov HV_FAST_MMU_TSB_CTXNON0, %o5 - mov 1, %o0 - mov %o4, %o1 + mov %o3, %o1 ta HV_FAST_TRAP - /* Finish up and restore %o5. */ + /* Finish up. */ ba,pt %xcc, 9f - mov %g1, %o5 + nop /* SUN4U TSB switch. */ -1: mov TSB_REG, %g1 - stxa %o1, [%g1] ASI_DMMU +50: mov TSB_REG, %o5 + stxa %o0, [%o5] ASI_DMMU membar #Sync - stxa %o1, [%g1] ASI_IMMU + stxa %o0, [%o5] ASI_IMMU membar #Sync -2: brz %o2, 9f - nop +2: ldx [%o1 + TSB_CONFIG_MAP_VADDR], %o4 + brz %o4, 9f + ldx [%o1 + TSB_CONFIG_MAP_PTE], %o5 sethi %hi(sparc64_highest_unlocked_tlb_ent), %g2 - mov TLB_TAG_ACCESS, %g1 + mov TLB_TAG_ACCESS, %g3 lduw [%g2 + %lo(sparc64_highest_unlocked_tlb_ent)], %g2 - stxa %o2, [%g1] ASI_DMMU + stxa %o4, [%g3] ASI_DMMU membar #Sync sllx %g2, 3, %g2 - stxa %o3, [%g2] ASI_DTLB_DATA_ACCESS + stxa %o5, [%g2] ASI_DTLB_DATA_ACCESS + membar #Sync + + brz,pt %o2, 9f + nop + + ldx [%o2 + TSB_CONFIG_MAP_VADDR], %o4 + ldx [%o2 + TSB_CONFIG_MAP_PTE], %o5 + mov TLB_TAG_ACCESS, %g3 + stxa %o4, [%g3] ASI_DMMU + membar #Sync + sub %g2, (1 << 3), %g2 + stxa %o5, [%g2] ASI_DTLB_DATA_ACCESS membar #Sync + 9: - wrpr %o5, %pstate + wrpr %g1, %pstate retl nop diff --git a/arch/sparc64/mm/fault.c b/arch/sparc64/mm/fault.c index 63b6cc0cd5d..d21ff3230c0 100644 --- a/arch/sparc64/mm/fault.c +++ b/arch/sparc64/mm/fault.c @@ -410,9 +410,18 @@ good_area: up_read(&mm->mmap_sem); mm_rss = get_mm_rss(mm); - if (unlikely(mm_rss >= mm->context.tsb_rss_limit)) - tsb_grow(mm, mm_rss); - +#ifdef CONFIG_HUGETLB_PAGE + mm_rss -= (mm->context.huge_pte_count * (HPAGE_SIZE / PAGE_SIZE)); +#endif + if (unlikely(mm_rss >= + mm->context.tsb_block[MM_TSB_BASE].tsb_rss_limit)) + tsb_grow(mm, MM_TSB_BASE, mm_rss); +#ifdef CONFIG_HUGETLB_PAGE + mm_rss = mm->context.huge_pte_count; + if (unlikely(mm_rss >= + mm->context.tsb_block[MM_TSB_HUGE].tsb_rss_limit)) + tsb_grow(mm, MM_TSB_HUGE, mm_rss); +#endif return; /* diff --git a/arch/sparc64/mm/hugetlbpage.c b/arch/sparc64/mm/hugetlbpage.c index a7a24869d04..0a1d4cd24cd 100644 --- a/arch/sparc64/mm/hugetlbpage.c +++ b/arch/sparc64/mm/hugetlbpage.c @@ -199,13 +199,11 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr) pte_t *pte = NULL; pgd = pgd_offset(mm, addr); - if (pgd) { - pud = pud_offset(pgd, addr); - if (pud) { - pmd = pmd_alloc(mm, pud, addr); - if (pmd) - pte = pte_alloc_map(mm, pmd, addr); - } + pud = pud_alloc(mm, pgd, addr); + if (pud) { + pmd = pmd_alloc(mm, pud, addr); + if (pmd) + pte = pte_alloc_map(mm, pmd, addr); } return pte; } @@ -231,13 +229,14 @@ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) return pte; } -#define mk_pte_huge(entry) do { pte_val(entry) |= _PAGE_SZHUGE; } while (0) - void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t entry) { int i; + if (!pte_present(*ptep) && pte_present(entry)) + mm->context.huge_pte_count++; + for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) { set_pte_at(mm, addr, ptep, entry); ptep++; @@ -253,6 +252,8 @@ pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, int i; entry = *ptep; + if (pte_present(entry)) + mm->context.huge_pte_count--; for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) { pte_clear(mm, addr, ptep); @@ -302,6 +303,15 @@ static void context_reload(void *__data) void hugetlb_prefault_arch_hook(struct mm_struct *mm) { + struct tsb_config *tp = &mm->context.tsb_block[MM_TSB_HUGE]; + + if (likely(tp->tsb != NULL)) + return; + + tsb_grow(mm, MM_TSB_HUGE, 0); + tsb_context_switch(mm); + smp_tsb_sync(mm); + /* On UltraSPARC-III+ and later, configure the second half of * the Data-TLB for huge pages. */ diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index c2b556106fc..16d231703d6 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -283,6 +283,7 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t p struct mm_struct *mm; struct tsb *tsb; unsigned long tag, flags; + unsigned long tsb_index, tsb_hash_shift; if (tlb_type != hypervisor) { unsigned long pfn = pte_pfn(pte); @@ -312,10 +313,26 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t p mm = vma->vm_mm; + tsb_index = MM_TSB_BASE; + tsb_hash_shift = PAGE_SHIFT; + spin_lock_irqsave(&mm->context.lock, flags); - tsb = &mm->context.tsb[(address >> PAGE_SHIFT) & - (mm->context.tsb_nentries - 1UL)]; +#ifdef CONFIG_HUGETLB_PAGE + if (mm->context.tsb_block[MM_TSB_HUGE].tsb != NULL) { + if ((tlb_type == hypervisor && + (pte_val(pte) & _PAGE_SZALL_4V) == _PAGE_SZHUGE_4V) || + (tlb_type != hypervisor && + (pte_val(pte) & _PAGE_SZALL_4U) == _PAGE_SZHUGE_4U)) { + tsb_index = MM_TSB_HUGE; + tsb_hash_shift = HPAGE_SHIFT; + } + } +#endif + + tsb = mm->context.tsb_block[tsb_index].tsb; + tsb += ((address >> tsb_hash_shift) & + (mm->context.tsb_block[tsb_index].tsb_nentries - 1UL)); tag = (address >> 22UL); tsb_insert(tsb, tag, pte_val(pte)); diff --git a/arch/sparc64/mm/tsb.c b/arch/sparc64/mm/tsb.c index b2064e2a44d..beaa02810f0 100644 --- a/arch/sparc64/mm/tsb.c +++ b/arch/sparc64/mm/tsb.c @@ -15,9 +15,9 @@ extern struct tsb swapper_tsb[KERNEL_TSB_NENTRIES]; -static inline unsigned long tsb_hash(unsigned long vaddr, unsigned long nentries) +static inline unsigned long tsb_hash(unsigned long vaddr, unsigned long hash_shift, unsigned long nentries) { - vaddr >>= PAGE_SHIFT; + vaddr >>= hash_shift; return vaddr & (nentries - 1); } @@ -36,7 +36,8 @@ void flush_tsb_kernel_range(unsigned long start, unsigned long end) unsigned long v; for (v = start; v < end; v += PAGE_SIZE) { - unsigned long hash = tsb_hash(v, KERNEL_TSB_NENTRIES); + unsigned long hash = tsb_hash(v, PAGE_SHIFT, + KERNEL_TSB_NENTRIES); struct tsb *ent = &swapper_tsb[hash]; if (tag_compare(ent->tag, v)) { @@ -46,49 +47,91 @@ void flush_tsb_kernel_range(unsigned long start, unsigned long end) } } -void flush_tsb_user(struct mmu_gather *mp) +static void __flush_tsb_one(struct mmu_gather *mp, unsigned long hash_shift, unsigned long tsb, unsigned long nentries) { - struct mm_struct *mm = mp->mm; - unsigned long nentries, base, flags; - struct tsb *tsb; - int i; - - spin_lock_irqsave(&mm->context.lock, flags); - - tsb = mm->context.tsb; - nentries = mm->context.tsb_nentries; + unsigned long i; - if (tlb_type == cheetah_plus || tlb_type == hypervisor) - base = __pa(tsb); - else - base = (unsigned long) tsb; - for (i = 0; i < mp->tlb_nr; i++) { unsigned long v = mp->vaddrs[i]; unsigned long tag, ent, hash; v &= ~0x1UL; - hash = tsb_hash(v, nentries); - ent = base + (hash * sizeof(struct tsb)); + hash = tsb_hash(v, hash_shift, nentries); + ent = tsb + (hash * sizeof(struct tsb)); tag = (v >> 22UL); tsb_flush(ent, tag); } +} + +void flush_tsb_user(struct mmu_gather *mp) +{ + struct mm_struct *mm = mp->mm; + unsigned long nentries, base, flags; + + spin_lock_irqsave(&mm->context.lock, flags); + base = (unsigned long) mm->context.tsb_block[MM_TSB_BASE].tsb; + nentries = mm->context.tsb_block[MM_TSB_BASE].tsb_nentries; + if (tlb_type == cheetah_plus || tlb_type == hypervisor) + base = __pa(base); + __flush_tsb_one(mp, PAGE_SHIFT, base, nentries); + +#ifdef CONFIG_HUGETLB_PAGE + if (mm->context.tsb_block[MM_TSB_HUGE].tsb) { + base = (unsigned long) mm->context.tsb_block[MM_TSB_HUGE].tsb; + nentries = mm->context.tsb_block[MM_TSB_HUGE].tsb_nentries; + if (tlb_type == cheetah_plus || tlb_type == hypervisor) + base = __pa(base); + __flush_tsb_one(mp, HPAGE_SHIFT, base, nentries); + } +#endif spin_unlock_irqrestore(&mm->context.lock, flags); } -static void setup_tsb_params(struct mm_struct *mm, unsigned long tsb_bytes) +#if defined(CONFIG_SPARC64_PAGE_SIZE_8KB) +#define HV_PGSZ_IDX_BASE HV_PGSZ_IDX_8K +#define HV_PGSZ_MASK_BASE HV_PGSZ_MASK_8K +#elif defined(CONFIG_SPARC64_PAGE_SIZE_64KB) +#define HV_PGSZ_IDX_BASE HV_PGSZ_IDX_64K +#define HV_PGSZ_MASK_BASE HV_PGSZ_MASK_64K +#elif defined(CONFIG_SPARC64_PAGE_SIZE_512KB) +#define HV_PGSZ_IDX_BASE HV_PGSZ_IDX_512K +#define HV_PGSZ_MASK_BASE HV_PGSZ_MASK_512K +#elif defined(CONFIG_SPARC64_PAGE_SIZE_4MB) +#define HV_PGSZ_IDX_BASE HV_PGSZ_IDX_4MB +#define HV_PGSZ_MASK_BASE HV_PGSZ_MASK_4MB +#else +#error Broken base page size setting... +#endif + +#ifdef CONFIG_HUGETLB_PAGE +#if defined(CONFIG_HUGETLB_PAGE_SIZE_64K) +#define HV_PGSZ_IDX_HUGE HV_PGSZ_IDX_64K +#define HV_PGSZ_MASK_HUGE HV_PGSZ_MASK_64K +#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512K) +#define HV_PGSZ_IDX_HUGE HV_PGSZ_IDX_512K +#define HV_PGSZ_MASK_HUGE HV_PGSZ_MASK_512K +#elif defined(CONFIG_HUGETLB_PAGE_SIZE_4MB) +#define HV_PGSZ_IDX_HUGE HV_PGSZ_IDX_4MB +#define HV_PGSZ_MASK_HUGE HV_PGSZ_MASK_4MB +#else +#error Broken huge page size setting... +#endif +#endif + +static void setup_tsb_params(struct mm_struct *mm, unsigned long tsb_idx, unsigned long tsb_bytes) { unsigned long tsb_reg, base, tsb_paddr; unsigned long page_sz, tte; - mm->context.tsb_nentries = tsb_bytes / sizeof(struct tsb); + mm->context.tsb_block[tsb_idx].tsb_nentries = + tsb_bytes / sizeof(struct tsb); base = TSBMAP_BASE; tte = pgprot_val(PAGE_KERNEL_LOCKED); - tsb_paddr = __pa(mm->context.tsb); + tsb_paddr = __pa(mm->context.tsb_block[tsb_idx].tsb); BUG_ON(tsb_paddr & (tsb_bytes - 1UL)); /* Use the smallest page size that can map the whole TSB @@ -147,61 +190,49 @@ static void setup_tsb_params(struct mm_struct *mm, unsigned long tsb_bytes) /* Physical mapping, no locked TLB entry for TSB. */ tsb_reg |= tsb_paddr; - mm->context.tsb_reg_val = tsb_reg; - mm->context.tsb_map_vaddr = 0; - mm->context.tsb_map_pte = 0; + mm->context.tsb_block[tsb_idx].tsb_reg_val = tsb_reg; + mm->context.tsb_block[tsb_idx].tsb_map_vaddr = 0; + mm->context.tsb_block[tsb_idx].tsb_map_pte = 0; } else { tsb_reg |= base; tsb_reg |= (tsb_paddr & (page_sz - 1UL)); tte |= (tsb_paddr & ~(page_sz - 1UL)); - mm->context.tsb_reg_val = tsb_reg; - mm->context.tsb_map_vaddr = base; - mm->context.tsb_map_pte = tte; + mm->context.tsb_block[tsb_idx].tsb_reg_val = tsb_reg; + mm->context.tsb_block[tsb_idx].tsb_map_vaddr = base; + mm->context.tsb_block[tsb_idx].tsb_map_pte = tte; } /* Setup the Hypervisor TSB descriptor. */ if (tlb_type == hypervisor) { - struct hv_tsb_descr *hp = &mm->context.tsb_descr; + struct hv_tsb_descr *hp = &mm->context.tsb_descr[tsb_idx]; - switch (PAGE_SIZE) { - case 8192: - default: - hp->pgsz_idx = HV_PGSZ_IDX_8K; + switch (tsb_idx) { + case MM_TSB_BASE: + hp->pgsz_idx = HV_PGSZ_IDX_BASE; break; - - case 64 * 1024: - hp->pgsz_idx = HV_PGSZ_IDX_64K; - break; - - case 512 * 1024: - hp->pgsz_idx = HV_PGSZ_IDX_512K; - break; - - case 4 * 1024 * 1024: - hp->pgsz_idx = HV_PGSZ_IDX_4MB; +#ifdef CONFIG_HUGETLB_PAGE + case MM_TSB_HUGE: + hp->pgsz_idx = HV_PGSZ_IDX_HUGE; break; +#endif + default: + BUG(); }; hp->assoc = 1; hp->num_ttes = tsb_bytes / 16; hp->ctx_idx = 0; - switch (PAGE_SIZE) { - case 8192: - default: - hp->pgsz_mask = HV_PGSZ_MASK_8K; - break; - - case 64 * 1024: - hp->pgsz_mask = HV_PGSZ_MASK_64K; - break; - - case 512 * 1024: - hp->pgsz_mask = HV_PGSZ_MASK_512K; + switch (tsb_idx) { + case MM_TSB_BASE: + hp->pgsz_mask = HV_PGSZ_MASK_BASE; break; - - case 4 * 1024 * 1024: - hp->pgsz_mask = HV_PGSZ_MASK_4MB; +#ifdef CONFIG_HUGETLB_PAGE + case MM_TSB_HUGE: + hp->pgsz_mask = HV_PGSZ_MASK_HUGE; break; +#endif + default: + BUG(); }; hp->tsb_base = tsb_paddr; hp->resv = 0; @@ -241,11 +272,11 @@ void __init tsb_cache_init(void) } } -/* When the RSS of an address space exceeds mm->context.tsb_rss_limit, - * do_sparc64_fault() invokes this routine to try and grow the TSB. +/* When the RSS of an address space exceeds tsb_rss_limit for a TSB, + * do_sparc64_fault() invokes this routine to try and grow it. * * When we reach the maximum TSB size supported, we stick ~0UL into - * mm->context.tsb_rss_limit so the grow checks in update_mmu_cache() + * tsb_rss_limit for that TSB so the grow checks in do_sparc64_fault() * will not trigger any longer. * * The TSB can be anywhere from 8K to 1MB in size, in increasing powers @@ -257,7 +288,7 @@ void __init tsb_cache_init(void) * the number of entries that the current TSB can hold at once. Currently, * we trigger when the RSS hits 3/4 of the TSB capacity. */ -void tsb_grow(struct mm_struct *mm, unsigned long rss) +void tsb_grow(struct mm_struct *mm, unsigned long tsb_index, unsigned long rss) { unsigned long max_tsb_size = 1 * 1024 * 1024; unsigned long new_size, old_size, flags; @@ -297,7 +328,8 @@ retry_tsb_alloc: * down to a 0-order allocation and force no TSB * growing for this address space. */ - if (mm->context.tsb == NULL && new_cache_index > 0) { + if (mm->context.tsb_block[tsb_index].tsb == NULL && + new_cache_index > 0) { new_cache_index = 0; new_size = 8192; new_rss_limit = ~0UL; @@ -307,8 +339,8 @@ retry_tsb_alloc: /* If we failed on a TSB grow, we are under serious * memory pressure so don't try to grow any more. */ - if (mm->context.tsb != NULL) - mm->context.tsb_rss_limit = ~0UL; + if (mm->context.tsb_block[tsb_index].tsb != NULL) + mm->context.tsb_block[tsb_index].tsb_rss_limit = ~0UL; return; } @@ -339,23 +371,26 @@ retry_tsb_alloc: */ spin_lock_irqsave(&mm->context.lock, flags); - old_tsb = mm->context.tsb; - old_cache_index = (mm->context.tsb_reg_val & 0x7UL); - old_size = mm->context.tsb_nentries * sizeof(struct tsb); + old_tsb = mm->context.tsb_block[tsb_index].tsb; + old_cache_index = + (mm->context.tsb_block[tsb_index].tsb_reg_val & 0x7UL); + old_size = (mm->context.tsb_block[tsb_index].tsb_nentries * + sizeof(struct tsb)); /* Handle multiple threads trying to grow the TSB at the same time. * One will get in here first, and bump the size and the RSS limit. * The others will get in here next and hit this check. */ - if (unlikely(old_tsb && (rss < mm->context.tsb_rss_limit))) { + if (unlikely(old_tsb && + (rss < mm->context.tsb_block[tsb_index].tsb_rss_limit))) { spin_unlock_irqrestore(&mm->context.lock, flags); kmem_cache_free(tsb_caches[new_cache_index], new_tsb); return; } - mm->context.tsb_rss_limit = new_rss_limit; + mm->context.tsb_block[tsb_index].tsb_rss_limit = new_rss_limit; if (old_tsb) { extern void copy_tsb(unsigned long old_tsb_base, @@ -372,8 +407,8 @@ retry_tsb_alloc: copy_tsb(old_tsb_base, old_size, new_tsb_base, new_size); } - mm->context.tsb = new_tsb; - setup_tsb_params(mm, new_size); + mm->context.tsb_block[tsb_index].tsb = new_tsb; + setup_tsb_params(mm, tsb_index, new_size); spin_unlock_irqrestore(&mm->context.lock, flags); @@ -394,40 +429,65 @@ retry_tsb_alloc: int init_new_context(struct task_struct *tsk, struct mm_struct *mm) { +#ifdef CONFIG_HUGETLB_PAGE + unsigned long huge_pte_count; +#endif + unsigned int i; + spin_lock_init(&mm->context.lock); mm->context.sparc64_ctx_val = 0UL; +#ifdef CONFIG_HUGETLB_PAGE + /* We reset it to zero because the fork() page copying + * will re-increment the counters as the parent PTEs are + * copied into the child address space. + */ + huge_pte_count = mm->context.huge_pte_count; + mm->context.huge_pte_count = 0; +#endif + /* copy_mm() copies over the parent's mm_struct before calling * us, so we need to zero out the TSB pointer or else tsb_grow() * will be confused and think there is an older TSB to free up. */ - mm->context.tsb = NULL; + for (i = 0; i < MM_NUM_TSBS; i++) + mm->context.tsb_block[i].tsb = NULL; /* If this is fork, inherit the parent's TSB size. We would * grow it to that size on the first page fault anyways. */ - tsb_grow(mm, get_mm_rss(mm)); + tsb_grow(mm, MM_TSB_BASE, get_mm_rss(mm)); - if (unlikely(!mm->context.tsb)) +#ifdef CONFIG_HUGETLB_PAGE + if (unlikely(huge_pte_count)) + tsb_grow(mm, MM_TSB_HUGE, huge_pte_count); +#endif + + if (unlikely(!mm->context.tsb_block[MM_TSB_BASE].tsb)) return -ENOMEM; return 0; } -void destroy_context(struct mm_struct *mm) +static void tsb_destroy_one(struct tsb_config *tp) { - unsigned long flags, cache_index; + unsigned long cache_index; - cache_index = (mm->context.tsb_reg_val & 0x7UL); - kmem_cache_free(tsb_caches[cache_index], mm->context.tsb); + if (!tp->tsb) + return; + cache_index = tp->tsb_reg_val & 0x7UL; + kmem_cache_free(tsb_caches[cache_index], tp->tsb); + tp->tsb = NULL; + tp->tsb_reg_val = 0UL; +} - /* We can remove these later, but for now it's useful - * to catch any bogus post-destroy_context() references - * to the TSB. - */ - mm->context.tsb = NULL; - mm->context.tsb_reg_val = 0UL; +void destroy_context(struct mm_struct *mm) +{ + unsigned long flags, i; + + for (i = 0; i < MM_NUM_TSBS; i++) + tsb_destroy_one(&mm->context.tsb_block[i]); spin_lock_irqsave(&ctx_alloc_lock, flags); -- cgit v1.2.3-18-g5258 From f7cbb7fcd3bae5264a079e06411b35366da9bd4d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 13 Jan 2006 18:48:06 +0100 Subject: [ALSA] Fix snd_xxx_t typedefs Modules: PXA Mainstone driver,CX88 driver,SAA7134 driver Replace snd_xxx_t typedefs with explicit structs. Signed-off-by: Takashi Iwai --- arch/arm/mach-pxa/mainstone.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index d5bda60209e..98356f81000 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -157,14 +157,14 @@ static struct platform_device smc91x_device = { .resource = smc91x_resources, }; -static int mst_audio_startup(snd_pcm_substream_t *substream, void *priv) +static int mst_audio_startup(struct snd_pcm_substream *substream, void *priv) { if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) MST_MSCWR2 &= ~MST_MSCWR2_AC97_SPKROFF; return 0; } -static void mst_audio_shutdown(snd_pcm_substream_t *substream, void *priv) +static void mst_audio_shutdown(struct snd_pcm_substream *substream, void *priv) { if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) MST_MSCWR2 |= MST_MSCWR2_AC97_SPKROFF; -- cgit v1.2.3-18-g5258 From bec1b8193651ea4394cc4d6e18152cb83e735f93 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 22 Mar 2006 10:22:58 +0000 Subject: [ARM] Quieten spurious IRQ detection Only issue a "nobody cared" warning after 99900 spurious interrupts. This avoids the occasional spurious interrupt causing warnings, as per x86. Signed-off-by: Russell King --- arch/arm/kernel/irq.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 1d50d2b98f5..2d5896b3618 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -305,14 +305,19 @@ report_bad_irq(unsigned int irq, struct pt_regs *regs, struct irqdesc *desc, int static int count = 100; struct irqaction *action; - if (!count || noirqdebug) + if (noirqdebug) return; - count--; - if (ret != IRQ_HANDLED && ret != IRQ_NONE) { + if (!count) + return; + count--; printk("irq%u: bogus retval mask %x\n", irq, ret); } else { + desc->irqs_unhandled++; + if (desc->irqs_unhandled <= 99900) + return; + desc->irqs_unhandled = 0; printk("irq%u: nobody cared\n", irq); } show_regs(regs); -- cgit v1.2.3-18-g5258 From 4078006568c142a909e7889cbdc28804cec25461 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 22 Mar 2006 00:07:35 -0800 Subject: [PATCH] efi_call_phys_epilog() warning fix arch/i386/kernel/efi.c: In function `efi_call_phys_epilog': arch/i386/kernel/efi.c:118: warning: assignment makes integer from pointer without a cast Cc: Matt Domsch Cc: "Tolentino, Matthew E" Cc: Zachary Amsden Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/efi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/i386/kernel/efi.c b/arch/i386/kernel/efi.c index c9cad7ba0d2..aeabb419686 100644 --- a/arch/i386/kernel/efi.c +++ b/arch/i386/kernel/efi.c @@ -115,7 +115,7 @@ static void efi_call_phys_epilog(void) unsigned long cr4; struct Xgt_desc_struct *cpu_gdt_descr = &per_cpu(cpu_gdt_descr, 0); - cpu_gdt_descr->address = __va(cpu_gdt_descr->address); + cpu_gdt_descr->address = (unsigned long)__va(cpu_gdt_descr->address); load_gdt(cpu_gdt_descr); cr4 = read_cr4(); -- cgit v1.2.3-18-g5258 From 68ed0040a8c9d06b73cda322a1f740749bd6e41a Mon Sep 17 00:00:00 2001 From: Ravikiran G Thirumalai Date: Wed, 22 Mar 2006 00:07:38 -0800 Subject: [PATCH] x86: mark cyc2ns_scale readmostly This variable is rarely written to. Mark the variable accordingly. Signed-off-by: Ravikiran Thirumalai Signed-off-by: Shai Fultheim Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/timers/timer_hpet.c | 2 +- arch/i386/kernel/timers/timer_tsc.c | 2 +- arch/x86_64/kernel/time.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/timers/timer_hpet.c b/arch/i386/kernel/timers/timer_hpet.c index be242723c33..17a6fe7166e 100644 --- a/arch/i386/kernel/timers/timer_hpet.c +++ b/arch/i386/kernel/timers/timer_hpet.c @@ -46,7 +46,7 @@ static seqlock_t monotonic_lock = SEQLOCK_UNLOCKED; * * -johnstul@us.ibm.com "math is hard, lets go shopping!" */ -static unsigned long cyc2ns_scale; +static unsigned long cyc2ns_scale __read_mostly; #define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */ static inline void set_cyc2ns_scale(unsigned long cpu_khz) diff --git a/arch/i386/kernel/timers/timer_tsc.c b/arch/i386/kernel/timers/timer_tsc.c index a7f5a2aceba..5e41ee29c8c 100644 --- a/arch/i386/kernel/timers/timer_tsc.c +++ b/arch/i386/kernel/timers/timer_tsc.c @@ -74,7 +74,7 @@ late_initcall(start_lost_tick_compensation); * * -johnstul@us.ibm.com "math is hard, lets go shopping!" */ -static unsigned long cyc2ns_scale; +static unsigned long cyc2ns_scale __read_mostly; #define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */ static inline void set_cyc2ns_scale(unsigned long cpu_khz) diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c index 3080f84bf7b..ee5ce3d3cbc 100644 --- a/arch/x86_64/kernel/time.c +++ b/arch/x86_64/kernel/time.c @@ -477,7 +477,7 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) return IRQ_HANDLED; } -static unsigned int cyc2ns_scale; +static unsigned int cyc2ns_scale __read_mostly; #define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */ static inline void set_cyc2ns_scale(unsigned long cpu_khz) -- cgit v1.2.3-18-g5258 From f4a641d66c6e135dcfc861521e8008faed2411e1 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 22 Mar 2006 00:07:46 -0800 Subject: [PATCH] multiple exports of strpbrk Sam's tree includes a new check, which found that we're exporting strpbrk() multiple times. It seems that the convention is that this is exported from the arch files, so reove the lib/string.c export. Cc: Sam Ravnborg Cc: Yoshinori Sato Cc: David Howells Cc: Greg Ungerer Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/frv/kernel/frv_ksyms.c | 1 + arch/h8300/kernel/h8300_ksyms.c | 1 + arch/m68knommu/kernel/m68k_ksyms.c | 1 + arch/x86_64/kernel/x8664_ksyms.c | 1 + 4 files changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/frv/kernel/frv_ksyms.c b/arch/frv/kernel/frv_ksyms.c index 0f1c6cbc4f5..aa6b7d0a210 100644 --- a/arch/frv/kernel/frv_ksyms.c +++ b/arch/frv/kernel/frv_ksyms.c @@ -27,6 +27,7 @@ EXPORT_SYMBOL(__ioremap); EXPORT_SYMBOL(iounmap); EXPORT_SYMBOL(strnlen); +EXPORT_SYMBOL(strpbrk); EXPORT_SYMBOL(strrchr); EXPORT_SYMBOL(strstr); EXPORT_SYMBOL(strchr); diff --git a/arch/h8300/kernel/h8300_ksyms.c b/arch/h8300/kernel/h8300_ksyms.c index 5cc76efaf7a..69d6ad32d56 100644 --- a/arch/h8300/kernel/h8300_ksyms.c +++ b/arch/h8300/kernel/h8300_ksyms.c @@ -25,6 +25,7 @@ extern char h8300_debug_device[]; /* platform dependent support */ EXPORT_SYMBOL(strnlen); +EXPORT_SYMBOL(strpbrk); EXPORT_SYMBOL(strrchr); EXPORT_SYMBOL(strstr); EXPORT_SYMBOL(strchr); diff --git a/arch/m68knommu/kernel/m68k_ksyms.c b/arch/m68knommu/kernel/m68k_ksyms.c index eddb8d3e130..d844c755945 100644 --- a/arch/m68knommu/kernel/m68k_ksyms.c +++ b/arch/m68knommu/kernel/m68k_ksyms.c @@ -26,6 +26,7 @@ EXPORT_SYMBOL(__ioremap); EXPORT_SYMBOL(iounmap); EXPORT_SYMBOL(dump_fpu); EXPORT_SYMBOL(strnlen); +EXPORT_SYMBOL(strpbrk); EXPORT_SYMBOL(strrchr); EXPORT_SYMBOL(strstr); EXPORT_SYMBOL(strchr); diff --git a/arch/x86_64/kernel/x8664_ksyms.c b/arch/x86_64/kernel/x8664_ksyms.c index 3496abc8d37..c9dc7e46731 100644 --- a/arch/x86_64/kernel/x8664_ksyms.c +++ b/arch/x86_64/kernel/x8664_ksyms.c @@ -124,6 +124,7 @@ extern void * __memcpy(void *,const void *,__kernel_size_t); EXPORT_SYMBOL(memset); EXPORT_SYMBOL(strlen); +EXPORT_SYMBOL(strpbrk); EXPORT_SYMBOL(memmove); EXPORT_SYMBOL(memcpy); EXPORT_SYMBOL(__memcpy); -- cgit v1.2.3-18-g5258 From 8e7a9aae91101916b86de07fafe3272ea8dc1f10 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Wed, 22 Mar 2006 00:08:04 -0800 Subject: [PATCH] xtensa: pgtable fixes - Don't return uninitialised stack values in case of allocation failure - Don't bother clearing PageCompound because __GFP_COMP wasn't specified Increment over the pte page rather than one pte entry in pte_alloc_one_kernel - Actually increment the page pointer in pte_alloc_one - Compile fixes, typos. Signed-off-by: Nick Piggin Acked-by: Chris Zankel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/xtensa/mm/pgtable.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/xtensa/mm/pgtable.c b/arch/xtensa/mm/pgtable.c index e5e119c820e..cbc56aedf13 100644 --- a/arch/xtensa/mm/pgtable.c +++ b/arch/xtensa/mm/pgtable.c @@ -14,7 +14,7 @@ pte_t* pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) { - pte_t *pte, p; + pte_t *pte = NULL, *p; int color = ADDR_COLOR(address); int i; @@ -23,16 +23,16 @@ pte_t* pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) if (likely(p)) { struct page *page; - for (i = 0; i < COLOR_SIZE; i++, p++) { - page = virt_to_page(pte); + for (i = 0; i < COLOR_SIZE; i++) { + page = virt_to_page(p); set_page_count(page, 1); - ClearPageCompound(page); if (ADDR_COLOR(p) == color) pte = p; else free_page(p); + p += PTRS_PER_PTE; } clear_page(pte); } @@ -49,7 +49,7 @@ int flush; struct page* pte_alloc_one(struct mm_struct *mm, unsigned long address) { - struct page *page, p; + struct page *page = NULL, *p; int color = ADDR_COLOR(address); p = alloc_pages(GFP_KERNEL | __GFP_REPEAT, PTE_ORDER); @@ -57,12 +57,12 @@ struct page* pte_alloc_one(struct mm_struct *mm, unsigned long address) if (likely(p)) { for (i = 0; i < PAGE_ORDER; i++) { set_page_count(p, 1); - ClearPageCompound(p); - if (PADDR_COLOR(page_address(pg)) == color) + if (PADDR_COLOR(page_address(p)) == color) page = p; else - free_page(p); + __free_page(p); + p++; } clear_highpage(page); } -- cgit v1.2.3-18-g5258 From 8dfcc9ba27e2ed257e5de9539f7f03e57c2c0e33 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Wed, 22 Mar 2006 00:08:05 -0800 Subject: [PATCH] mm: split highorder pages Have an explicit mm call to split higher order pages into individual pages. Should help to avoid bugs and be more explicit about the code's intention. Signed-off-by: Nick Piggin Cc: Russell King Cc: David Howells Cc: Ralf Baechle Cc: Benjamin Herrenschmidt Cc: Paul Mundt Cc: "David S. Miller" Cc: Chris Zankel Signed-off-by: Yoichi Yuasa Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/arm/mm/consistent.c | 4 ++-- arch/frv/mm/dma-alloc.c | 4 +--- arch/mips/mm/init.c | 5 +++-- arch/ppc/kernel/dma-mapping.c | 4 ++-- arch/sh/mm/consistent.c | 3 +-- arch/xtensa/mm/pgtable.c | 10 +++------- 6 files changed, 12 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/consistent.c b/arch/arm/mm/consistent.c index c2ee18d2075..8a1bfcd5008 100644 --- a/arch/arm/mm/consistent.c +++ b/arch/arm/mm/consistent.c @@ -223,6 +223,8 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, pte = consistent_pte[idx] + off; c->vm_pages = page; + split_page(page, order); + /* * Set the "dma handle" */ @@ -231,7 +233,6 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, do { BUG_ON(!pte_none(*pte)); - set_page_count(page, 1); /* * x86 does not mark the pages reserved... */ @@ -250,7 +251,6 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, * Free the otherwise unused pages. */ while (page < end) { - set_page_count(page, 1); __free_page(page); page++; } diff --git a/arch/frv/mm/dma-alloc.c b/arch/frv/mm/dma-alloc.c index 342823aad75..636b2f8b5d9 100644 --- a/arch/frv/mm/dma-alloc.c +++ b/arch/frv/mm/dma-alloc.c @@ -115,9 +115,7 @@ void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *dma_handle) */ if (order > 0) { struct page *rpage = virt_to_page(page); - - for (i = 1; i < (1 << order); i++) - set_page_count(rpage + i, 1); + split_page(rpage, order); } err = 0; diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index 0ff9a348b84..a140da9732d 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -54,7 +54,8 @@ unsigned long empty_zero_page, zero_page_mask; */ unsigned long setup_zero_pages(void) { - unsigned long order, size; + unsigned int order; + unsigned long size; struct page *page; if (cpu_has_vce) @@ -67,9 +68,9 @@ unsigned long setup_zero_pages(void) panic("Oh boy, that early out of memory?"); page = virt_to_page(empty_zero_page); + split_page(page, order); while (page < virt_to_page(empty_zero_page + (PAGE_SIZE << order))) { SetPageReserved(page); - set_page_count(page, 1); page++; } diff --git a/arch/ppc/kernel/dma-mapping.c b/arch/ppc/kernel/dma-mapping.c index 685fd0defe2..61465ec88bc 100644 --- a/arch/ppc/kernel/dma-mapping.c +++ b/arch/ppc/kernel/dma-mapping.c @@ -223,6 +223,8 @@ __dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp) pte_t *pte = consistent_pte + CONSISTENT_OFFSET(vaddr); struct page *end = page + (1 << order); + split_page(page, order); + /* * Set the "dma handle" */ @@ -231,7 +233,6 @@ __dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp) do { BUG_ON(!pte_none(*pte)); - set_page_count(page, 1); SetPageReserved(page); set_pte_at(&init_mm, vaddr, pte, mk_pte(page, pgprot_noncached(PAGE_KERNEL))); @@ -244,7 +245,6 @@ __dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp) * Free the otherwise unused pages. */ while (page < end) { - set_page_count(page, 1); __free_page(page); page++; } diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c index df3a9e452cc..ee73e30263a 100644 --- a/arch/sh/mm/consistent.c +++ b/arch/sh/mm/consistent.c @@ -23,6 +23,7 @@ void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *handle) page = alloc_pages(gfp, order); if (!page) return NULL; + split_page(page, order); ret = page_address(page); *handle = virt_to_phys(ret); @@ -37,8 +38,6 @@ void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *handle) end = page + (1 << order); while (++page < end) { - set_page_count(page, 1); - /* Free any unused pages */ if (page >= free) { __free_page(page); diff --git a/arch/xtensa/mm/pgtable.c b/arch/xtensa/mm/pgtable.c index cbc56aedf13..7d28914d11c 100644 --- a/arch/xtensa/mm/pgtable.c +++ b/arch/xtensa/mm/pgtable.c @@ -21,13 +21,9 @@ pte_t* pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) p = (pte_t*) __get_free_pages(GFP_KERNEL|__GFP_REPEAT, COLOR_ORDER); if (likely(p)) { - struct page *page; + split_page(virt_to_page(p), COLOR_ORDER); for (i = 0; i < COLOR_SIZE; i++) { - page = virt_to_page(p); - - set_page_count(page, 1); - if (ADDR_COLOR(p) == color) pte = p; else @@ -55,9 +51,9 @@ struct page* pte_alloc_one(struct mm_struct *mm, unsigned long address) p = alloc_pages(GFP_KERNEL | __GFP_REPEAT, PTE_ORDER); if (likely(p)) { - for (i = 0; i < PAGE_ORDER; i++) { - set_page_count(p, 1); + split_page(p, COLOR_ORDER); + for (i = 0; i < PAGE_ORDER; i++) { if (PADDR_COLOR(page_address(p)) == color) page = p; else -- cgit v1.2.3-18-g5258 From 78eef01b0fae087c5fadbd85dd4fe2918c3a015f Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 22 Mar 2006 00:08:16 -0800 Subject: [PATCH] on_each_cpu(): disable local interrupts When on_each_cpu() runs the callback on other CPUs, it runs with local interrupts disabled. So we should run the function with local interrupts disabled on this CPU, too. And do the same for UP, so the callback is run in the same environment on both UP and SMP. (strictly it should do preempt_disable() too, but I think local_irq_disable is sufficiently equivalent). Also uninlines on_each_cpu(). softirq.c was the most appropriate file I could find, but it doesn't seem to justify creating a new file. Oh, and fix up that comment over (under?) x86's smp_call_function(). It drives me nuts. Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/smp.c | 28 ++++++++++++---------------- 1 file changed, 12 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/smp.c b/arch/i386/kernel/smp.c index 218d725a5a1..d134e9643a5 100644 --- a/arch/i386/kernel/smp.c +++ b/arch/i386/kernel/smp.c @@ -504,27 +504,23 @@ void unlock_ipi_call_lock(void) spin_unlock_irq(&call_lock); } -static struct call_data_struct * call_data; - -/* - * this function sends a 'generic call function' IPI to all other CPUs - * in the system. - */ - -int smp_call_function (void (*func) (void *info), void *info, int nonatomic, - int wait) -/* - * [SUMMARY] Run a function on all other CPUs. - * The function to run. This must be fast and non-blocking. - * An arbitrary pointer to pass to the function. - * currently unused. - * If true, wait (atomically) until function has completed on other CPUs. - * [RETURNS] 0 on success, else a negative status code. Does not return until +static struct call_data_struct *call_data; + +/** + * smp_call_function(): Run a function on all other CPUs. + * @func: The function to run. This must be fast and non-blocking. + * @info: An arbitrary pointer to pass to the function. + * @nonatomic: currently unused. + * @wait: If true, wait (atomically) until function has completed on other CPUs. + * + * Returns 0 on success, else a negative status code. Does not return until * remote CPUs are nearly ready to execute <> or are or have executed. * * You must not call this function with disabled interrupts or from a * hardware interrupt handler or from a bottom half handler. */ +int smp_call_function (void (*func) (void *info), void *info, int nonatomic, + int wait) { struct call_data_struct data; int cpus; -- cgit v1.2.3-18-g5258 From 84d1c054b1c408c6c92676069fa678d55d5f0033 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Wed, 22 Mar 2006 00:08:31 -0800 Subject: [PATCH] i386: pageattr remove __put_page Stop using __put_page and page_count in i386 pageattr.c Signed-off-by: Nick Piggin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/mm/pageattr.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/i386/mm/pageattr.c b/arch/i386/mm/pageattr.c index d0cadb33b54..92c3d9f0e73 100644 --- a/arch/i386/mm/pageattr.c +++ b/arch/i386/mm/pageattr.c @@ -51,6 +51,13 @@ static struct page *split_large_page(unsigned long address, pgprot_t prot, if (!base) return NULL; + /* + * page_private is used to track the number of entries in + * the page table page that have non standard attributes. + */ + SetPagePrivate(base); + page_private(base) = 0; + address = __pa(address); addr = address & LARGE_PAGE_MASK; pbase = (pte_t *)page_address(base); @@ -143,11 +150,12 @@ __change_page_attr(struct page *page, pgprot_t prot) return -ENOMEM; set_pmd_pte(kpte,address,mk_pte(split, ref_prot)); kpte_page = split; - } - get_page(kpte_page); + } + page_private(kpte_page)++; } else if ((pte_val(*kpte) & _PAGE_PSE) == 0) { set_pte_atomic(kpte, mk_pte(page, PAGE_KERNEL)); - __put_page(kpte_page); + BUG_ON(page_private(kpte_page) == 0); + page_private(kpte_page)--; } else BUG(); @@ -157,10 +165,8 @@ __change_page_attr(struct page *page, pgprot_t prot) * replace it with a largepage. */ if (!PageReserved(kpte_page)) { - /* memleak and potential failed 2M page regeneration */ - BUG_ON(!page_count(kpte_page)); - - if (cpu_has_pse && (page_count(kpte_page) == 1)) { + if (cpu_has_pse && (page_private(kpte_page) == 0)) { + ClearPagePrivate(kpte_page); list_add(&kpte_page->lru, &df_list); revert_page(kpte_page, address); } -- cgit v1.2.3-18-g5258 From 20aaffd6a6492a5f7975dd7be967cdf0e4d978c4 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Wed, 22 Mar 2006 00:08:32 -0800 Subject: [PATCH] x86_64: pageattr use single list Use page->lru.next to implement the singly linked list of pages rather than the struct deferred_page which needs to be allocated and freed for each page. Signed-off-by: Nick Piggin Acked-by: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86_64/mm/pageattr.c | 42 ++++++++++++++---------------------------- 1 file changed, 14 insertions(+), 28 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/mm/pageattr.c b/arch/x86_64/mm/pageattr.c index 35f1f1aab06..efe5af14c7d 100644 --- a/arch/x86_64/mm/pageattr.c +++ b/arch/x86_64/mm/pageattr.c @@ -77,26 +77,12 @@ static inline void flush_map(unsigned long address) on_each_cpu(flush_kernel_map, (void *)address, 1, 1); } -struct deferred_page { - struct deferred_page *next; - struct page *fpage; - unsigned long address; -}; -static struct deferred_page *df_list; /* protected by init_mm.mmap_sem */ - -static inline void save_page(unsigned long address, struct page *fpage) +static struct page *deferred_pages; /* protected by init_mm.mmap_sem */ + +static inline void save_page(struct page *fpage) { - struct deferred_page *df; - df = kmalloc(sizeof(struct deferred_page), GFP_KERNEL); - if (!df) { - flush_map(address); - __free_page(fpage); - } else { - df->next = df_list; - df->fpage = fpage; - df->address = address; - df_list = df; - } + fpage->lru.next = (struct list_head *)deferred_pages; + deferred_pages = fpage; } /* @@ -163,7 +149,7 @@ __change_page_attr(unsigned long address, unsigned long pfn, pgprot_t prot, switch (page_count(kpte_page)) { case 1: - save_page(address, kpte_page); + save_page(kpte_page); revert_page(address, ref_prot); break; case 0: @@ -220,17 +206,17 @@ int change_page_attr(struct page *page, int numpages, pgprot_t prot) void global_flush_tlb(void) { - struct deferred_page *df, *next_df; + struct page *dpage; down_read(&init_mm.mmap_sem); - df = xchg(&df_list, NULL); + dpage = xchg(&deferred_pages, NULL); up_read(&init_mm.mmap_sem); - flush_map((df && !df->next) ? df->address : 0); - for (; df; df = next_df) { - next_df = df->next; - if (df->fpage) - __free_page(df->fpage); - kfree(df); + + flush_map((dpage && !dpage->lru.next) ? (unsigned long)page_address(dpage) : 0); + while (dpage) { + struct page *tmp = dpage; + dpage = (struct page *)dpage->lru.next; + __free_page(tmp); } } -- cgit v1.2.3-18-g5258 From 4fa4f53bf92139595cae6f1a3d972fc0a3451d29 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Wed, 22 Mar 2006 00:08:33 -0800 Subject: [PATCH] x86_64: pageattr remove __put_page Remove page_count and __put_page from x86-64 pageattr Signed-off-by: Nick Piggin Acked-by: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86_64/mm/pageattr.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/mm/pageattr.c b/arch/x86_64/mm/pageattr.c index efe5af14c7d..531ad21447b 100644 --- a/arch/x86_64/mm/pageattr.c +++ b/arch/x86_64/mm/pageattr.c @@ -45,6 +45,13 @@ static struct page *split_large_page(unsigned long address, pgprot_t prot, pte_t *pbase; if (!base) return NULL; + /* + * page_private is used to track the number of entries in + * the page table page have non standard attributes. + */ + SetPagePrivate(base); + page_private(base) = 0; + address = __pa(address); addr = address & LARGE_PAGE_MASK; pbase = (pte_t *)page_address(base); @@ -124,8 +131,8 @@ __change_page_attr(unsigned long address, unsigned long pfn, pgprot_t prot, set_pte(kpte, pfn_pte(pfn, prot)); } else { /* - * split_large_page will take the reference for this change_page_attr - * on the split page. + * split_large_page will take the reference for this + * change_page_attr on the split page. */ struct page *split; @@ -137,23 +144,20 @@ __change_page_attr(unsigned long address, unsigned long pfn, pgprot_t prot, set_pte(kpte,mk_pte(split, ref_prot2)); kpte_page = split; } - get_page(kpte_page); + page_private(kpte_page)++; } else if ((kpte_flags & _PAGE_PSE) == 0) { set_pte(kpte, pfn_pte(pfn, ref_prot)); - __put_page(kpte_page); + BUG_ON(page_private(kpte_page) == 0); + page_private(kpte_page)--; } else BUG(); /* on x86-64 the direct mapping set at boot is not using 4k pages */ BUG_ON(PageReserved(kpte_page)); - switch (page_count(kpte_page)) { - case 1: + if (page_private(kpte_page) == 0) { save_page(kpte_page); revert_page(address, ref_prot); - break; - case 0: - BUG(); /* memleak and failed 2M page regeneration */ } return 0; } @@ -216,6 +220,7 @@ void global_flush_tlb(void) while (dpage) { struct page *tmp = dpage; dpage = (struct page *)dpage->lru.next; + ClearPagePrivate(tmp); __free_page(tmp); } } -- cgit v1.2.3-18-g5258 From 70dc991d66cac40fdb07346dba2b5d862d732c34 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Wed, 22 Mar 2006 00:08:35 -0800 Subject: [PATCH] remove set_page_count(page, 0) users (outside mm) A couple of places set_page_count(page, 1) that don't need to. Signed-off-by: Nick Piggin Cc: Paul Mackerras Cc: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/mm/mem.c | 4 ++-- arch/um/kernel/physmem.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 550517c2dd4..6ae5c130d0d 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -108,8 +108,8 @@ EXPORT_SYMBOL(phys_mem_access_prot); void online_page(struct page *page) { ClearPageReserved(page); - set_page_count(page, 0); - free_cold_page(page); + set_page_count(page, 1); + __free_page(page); totalram_pages++; num_physpages++; } diff --git a/arch/um/kernel/physmem.c b/arch/um/kernel/physmem.c index 544665e0451..0e65340eee3 100644 --- a/arch/um/kernel/physmem.c +++ b/arch/um/kernel/physmem.c @@ -279,7 +279,7 @@ int init_maps(unsigned long physmem, unsigned long iomem, unsigned long highmem) for(i = 0; i < total_pages; i++){ p = &map[i]; - set_page_count(p, 0); + memset(p, 0, sizeof(struct page)); SetPageReserved(p); INIT_LIST_HEAD(&p->lru); } -- cgit v1.2.3-18-g5258 From 7835e98b2e3c66dba79cb0ff8ebb90a2fe030c29 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Wed, 22 Mar 2006 00:08:40 -0800 Subject: [PATCH] remove set_page_count() outside mm/ set_page_count usage outside mm/ is limited to setting the refcount to 1. Remove set_page_count from outside mm/, and replace those users with init_page_count() and set_page_refcounted(). This allows more debug checking, and tighter control on how code is allowed to play around with page->_count. Signed-off-by: Nick Piggin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/alpha/mm/init.c | 2 +- arch/arm/mm/init.c | 2 +- arch/arm26/mm/init.c | 2 +- arch/cris/mm/init.c | 2 +- arch/frv/mm/init.c | 6 +++--- arch/h8300/mm/init.c | 4 ++-- arch/i386/mm/init.c | 6 +++--- arch/ia64/mm/init.c | 6 +++--- arch/m32r/mm/init.c | 4 ++-- arch/m68k/mm/init.c | 2 +- arch/m68k/mm/memory.c | 2 +- arch/m68k/mm/motorola.c | 2 +- arch/m68knommu/mm/init.c | 4 ++-- arch/mips/arc/memory.c | 2 +- arch/mips/dec/prom/memory.c | 2 +- arch/mips/mips-boards/generic/memory.c | 2 +- arch/mips/mips-boards/sim/sim_mem.c | 2 +- arch/mips/mm/init.c | 6 +++--- arch/mips/sgi-ip27/ip27-memory.c | 2 +- arch/parisc/mm/init.c | 4 ++-- arch/powerpc/mm/init_32.c | 4 ++-- arch/powerpc/mm/init_64.c | 4 ++-- arch/powerpc/mm/mem.c | 4 ++-- arch/powerpc/platforms/cell/setup.c | 2 +- arch/ppc/mm/init.c | 6 +++--- arch/s390/mm/init.c | 4 ++-- arch/sh/mm/init.c | 4 ++-- arch/sh64/mm/init.c | 4 ++-- arch/sparc/kernel/sun4d_smp.c | 6 +++--- arch/sparc/kernel/sun4m_smp.c | 6 +++--- arch/sparc/mm/init.c | 6 +++--- arch/sparc64/mm/init.c | 4 ++-- arch/um/kernel/mem.c | 4 ++-- arch/x86_64/mm/init.c | 6 +++--- arch/xtensa/mm/init.c | 2 +- 35 files changed, 65 insertions(+), 65 deletions(-) (limited to 'arch') diff --git a/arch/alpha/mm/init.c b/arch/alpha/mm/init.c index 486d7945583..544ac5dc09e 100644 --- a/arch/alpha/mm/init.c +++ b/arch/alpha/mm/init.c @@ -357,7 +357,7 @@ free_reserved_mem(void *start, void *end) void *__start = start; for (; __start < end; __start += PAGE_SIZE) { ClearPageReserved(virt_to_page(__start)); - set_page_count(virt_to_page(__start), 1); + init_page_count(virt_to_page(__start)); free_page((long)__start); totalram_pages++; } diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 8b276ee38ac..b0321e943b7 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -531,7 +531,7 @@ static inline void free_area(unsigned long addr, unsigned long end, char *s) for (; addr < end; addr += PAGE_SIZE) { struct page *page = virt_to_page(addr); ClearPageReserved(page); - set_page_count(page, 1); + init_page_count(page); free_page(addr); totalram_pages++; } diff --git a/arch/arm26/mm/init.c b/arch/arm26/mm/init.c index 1f09a9d0fb8..e3ecaa45374 100644 --- a/arch/arm26/mm/init.c +++ b/arch/arm26/mm/init.c @@ -324,7 +324,7 @@ static inline void free_area(unsigned long addr, unsigned long end, char *s) for (; addr < end; addr += PAGE_SIZE) { struct page *page = virt_to_page(addr); ClearPageReserved(page); - set_page_count(page, 1); + init_page_count(page); free_page(addr); totalram_pages++; } diff --git a/arch/cris/mm/init.c b/arch/cris/mm/init.c index 31a0018b525..b7842ff213a 100644 --- a/arch/cris/mm/init.c +++ b/arch/cris/mm/init.c @@ -216,7 +216,7 @@ free_initmem(void) addr = (unsigned long)(&__init_begin); for (; addr < (unsigned long)(&__init_end); addr += PAGE_SIZE) { ClearPageReserved(virt_to_page(addr)); - set_page_count(virt_to_page(addr), 1); + init_page_count(virt_to_page(addr)); free_page(addr); totalram_pages++; } diff --git a/arch/frv/mm/init.c b/arch/frv/mm/init.c index 765088ea8a5..8899aa1a4f0 100644 --- a/arch/frv/mm/init.c +++ b/arch/frv/mm/init.c @@ -169,7 +169,7 @@ void __init mem_init(void) struct page *page = &mem_map[pfn]; ClearPageReserved(page); - set_page_count(page, 1); + init_page_count(page); __free_page(page); totalram_pages++; } @@ -210,7 +210,7 @@ void __init free_initmem(void) /* next to check that the page we free is not a partial page */ for (addr = start; addr < end; addr += PAGE_SIZE) { ClearPageReserved(virt_to_page(addr)); - set_page_count(virt_to_page(addr), 1); + init_page_count(virt_to_page(addr)); free_page(addr); totalram_pages++; } @@ -230,7 +230,7 @@ void __init free_initrd_mem(unsigned long start, unsigned long end) int pages = 0; for (; start < end; start += PAGE_SIZE) { ClearPageReserved(virt_to_page(start)); - set_page_count(virt_to_page(start), 1); + init_page_count(virt_to_page(start)); free_page(start); totalram_pages++; pages++; diff --git a/arch/h8300/mm/init.c b/arch/h8300/mm/init.c index 1e0929ddc8c..09efc4b1f03 100644 --- a/arch/h8300/mm/init.c +++ b/arch/h8300/mm/init.c @@ -196,7 +196,7 @@ void free_initrd_mem(unsigned long start, unsigned long end) int pages = 0; for (; start < end; start += PAGE_SIZE) { ClearPageReserved(virt_to_page(start)); - set_page_count(virt_to_page(start), 1); + init_page_count(virt_to_page(start)); free_page(start); totalram_pages++; pages++; @@ -219,7 +219,7 @@ free_initmem() /* next to check that the page we free is not a partial page */ for (; addr + PAGE_SIZE < (unsigned long)(&__init_end); addr +=PAGE_SIZE) { ClearPageReserved(virt_to_page(addr)); - set_page_count(virt_to_page(addr), 1); + init_page_count(virt_to_page(addr)); free_page(addr); totalram_pages++; } diff --git a/arch/i386/mm/init.c b/arch/i386/mm/init.c index 2700f01994b..7ba55a6e2db 100644 --- a/arch/i386/mm/init.c +++ b/arch/i386/mm/init.c @@ -270,7 +270,7 @@ static void __init permanent_kmaps_init(pgd_t *pgd_base) static void __meminit free_new_highpage(struct page *page) { - set_page_count(page, 1); + init_page_count(page); __free_page(page); totalhigh_pages++; } @@ -727,7 +727,7 @@ void free_initmem(void) addr = (unsigned long)(&__init_begin); for (; addr < (unsigned long)(&__init_end); addr += PAGE_SIZE) { ClearPageReserved(virt_to_page(addr)); - set_page_count(virt_to_page(addr), 1); + init_page_count(virt_to_page(addr)); memset((void *)addr, 0xcc, PAGE_SIZE); free_page(addr); totalram_pages++; @@ -766,7 +766,7 @@ void free_initrd_mem(unsigned long start, unsigned long end) printk (KERN_INFO "Freeing initrd memory: %ldk freed\n", (end - start) >> 10); for (; start < end; start += PAGE_SIZE) { ClearPageReserved(virt_to_page(start)); - set_page_count(virt_to_page(start), 1); + init_page_count(virt_to_page(start)); free_page(start); totalram_pages++; } diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c index b38b6d213c1..08d94e6bfa1 100644 --- a/arch/ia64/mm/init.c +++ b/arch/ia64/mm/init.c @@ -197,7 +197,7 @@ free_initmem (void) eaddr = (unsigned long) ia64_imva(__init_end); while (addr < eaddr) { ClearPageReserved(virt_to_page(addr)); - set_page_count(virt_to_page(addr), 1); + init_page_count(virt_to_page(addr)); free_page(addr); ++totalram_pages; addr += PAGE_SIZE; @@ -252,7 +252,7 @@ free_initrd_mem (unsigned long start, unsigned long end) continue; page = virt_to_page(start); ClearPageReserved(page); - set_page_count(page, 1); + init_page_count(page); free_page(start); ++totalram_pages; } @@ -640,7 +640,7 @@ mem_init (void) void online_page(struct page *page) { ClearPageReserved(page); - set_page_count(page, 1); + init_page_count(page); __free_page(page); totalram_pages++; num_physpages++; diff --git a/arch/m32r/mm/init.c b/arch/m32r/mm/init.c index 6facf15b04f..c9e7dad860b 100644 --- a/arch/m32r/mm/init.c +++ b/arch/m32r/mm/init.c @@ -226,7 +226,7 @@ void free_initmem(void) addr = (unsigned long)(&__init_begin); for (; addr < (unsigned long)(&__init_end); addr += PAGE_SIZE) { ClearPageReserved(virt_to_page(addr)); - set_page_count(virt_to_page(addr), 1); + init_page_count(virt_to_page(addr)); free_page(addr); totalram_pages++; } @@ -244,7 +244,7 @@ void free_initrd_mem(unsigned long start, unsigned long end) unsigned long p; for (p = start; p < end; p += PAGE_SIZE) { ClearPageReserved(virt_to_page(p)); - set_page_count(virt_to_page(p), 1); + init_page_count(virt_to_page(p)); free_page(p); totalram_pages++; } diff --git a/arch/m68k/mm/init.c b/arch/m68k/mm/init.c index c45beb95594..a190e39c907 100644 --- a/arch/m68k/mm/init.c +++ b/arch/m68k/mm/init.c @@ -137,7 +137,7 @@ void free_initrd_mem(unsigned long start, unsigned long end) int pages = 0; for (; start < end; start += PAGE_SIZE) { ClearPageReserved(virt_to_page(start)); - set_page_count(virt_to_page(start), 1); + init_page_count(virt_to_page(start)); free_page(start); totalram_pages++; pages++; diff --git a/arch/m68k/mm/memory.c b/arch/m68k/mm/memory.c index 559942ce0e1..d6d582a5abb 100644 --- a/arch/m68k/mm/memory.c +++ b/arch/m68k/mm/memory.c @@ -54,7 +54,7 @@ void __init init_pointer_table(unsigned long ptable) /* unreserve the page so it's possible to free that page */ PD_PAGE(dp)->flags &= ~(1 << PG_reserved); - set_page_count(PD_PAGE(dp), 1); + init_page_count(PD_PAGE(dp)); return; } diff --git a/arch/m68k/mm/motorola.c b/arch/m68k/mm/motorola.c index d855fec2631..afb57eeafdc 100644 --- a/arch/m68k/mm/motorola.c +++ b/arch/m68k/mm/motorola.c @@ -276,7 +276,7 @@ void free_initmem(void) addr = (unsigned long)&__init_begin; for (; addr < (unsigned long)&__init_end; addr += PAGE_SIZE) { virt_to_page(addr)->flags &= ~(1 << PG_reserved); - set_page_count(virt_to_page(addr), 1); + init_page_count(virt_to_page(addr)); free_page(addr); totalram_pages++; } diff --git a/arch/m68knommu/mm/init.c b/arch/m68knommu/mm/init.c index 89f0b554ffb..d79503fe6e4 100644 --- a/arch/m68knommu/mm/init.c +++ b/arch/m68knommu/mm/init.c @@ -195,7 +195,7 @@ void free_initrd_mem(unsigned long start, unsigned long end) int pages = 0; for (; start < end; start += PAGE_SIZE) { ClearPageReserved(virt_to_page(start)); - set_page_count(virt_to_page(start), 1); + init_page_count(virt_to_page(start)); free_page(start); totalram_pages++; pages++; @@ -218,7 +218,7 @@ free_initmem() /* next to check that the page we free is not a partial page */ for (; addr + PAGE_SIZE < (unsigned long)(&__init_end); addr +=PAGE_SIZE) { ClearPageReserved(virt_to_page(addr)); - set_page_count(virt_to_page(addr), 1); + init_page_count(virt_to_page(addr)); free_page(addr); totalram_pages++; } diff --git a/arch/mips/arc/memory.c b/arch/mips/arc/memory.c index 958d2eb7886..8a9ef58cc39 100644 --- a/arch/mips/arc/memory.c +++ b/arch/mips/arc/memory.c @@ -158,7 +158,7 @@ unsigned long __init prom_free_prom_memory(void) while (addr < boot_mem_map.map[i].addr + boot_mem_map.map[i].size) { ClearPageReserved(virt_to_page(__va(addr))); - set_page_count(virt_to_page(__va(addr)), 1); + init_page_count(virt_to_page(__va(addr))); free_page((unsigned long)__va(addr)); addr += PAGE_SIZE; freed += PAGE_SIZE; diff --git a/arch/mips/dec/prom/memory.c b/arch/mips/dec/prom/memory.c index 81cb5a76cfb..1edaf3074ee 100644 --- a/arch/mips/dec/prom/memory.c +++ b/arch/mips/dec/prom/memory.c @@ -118,7 +118,7 @@ unsigned long __init prom_free_prom_memory(void) addr = PAGE_SIZE; while (addr < end) { ClearPageReserved(virt_to_page(__va(addr))); - set_page_count(virt_to_page(__va(addr)), 1); + init_page_count(virt_to_page(__va(addr))); free_page((unsigned long)__va(addr)); addr += PAGE_SIZE; } diff --git a/arch/mips/mips-boards/generic/memory.c b/arch/mips/mips-boards/generic/memory.c index 2c8afd77a20..ee5e70c95cf 100644 --- a/arch/mips/mips-boards/generic/memory.c +++ b/arch/mips/mips-boards/generic/memory.c @@ -174,7 +174,7 @@ unsigned long __init prom_free_prom_memory(void) while (addr < boot_mem_map.map[i].addr + boot_mem_map.map[i].size) { ClearPageReserved(virt_to_page(__va(addr))); - set_page_count(virt_to_page(__va(addr)), 1); + init_page_count(virt_to_page(__va(addr))); free_page((unsigned long)__va(addr)); addr += PAGE_SIZE; freed += PAGE_SIZE; diff --git a/arch/mips/mips-boards/sim/sim_mem.c b/arch/mips/mips-boards/sim/sim_mem.c index 0dbd7435bb2..1ec4e75656b 100644 --- a/arch/mips/mips-boards/sim/sim_mem.c +++ b/arch/mips/mips-boards/sim/sim_mem.c @@ -117,7 +117,7 @@ unsigned long __init prom_free_prom_memory(void) while (addr < boot_mem_map.map[i].addr + boot_mem_map.map[i].size) { ClearPageReserved(virt_to_page(__va(addr))); - set_page_count(virt_to_page(__va(addr)), 1); + init_page_count(virt_to_page(__va(addr))); free_page((unsigned long)__va(addr)); addr += PAGE_SIZE; freed += PAGE_SIZE; diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index a140da9732d..52f7d59fe61 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -245,7 +245,7 @@ void __init mem_init(void) #ifdef CONFIG_LIMITED_DMA set_page_address(page, lowmem_page_address(page)); #endif - set_page_count(page, 1); + init_page_count(page); __free_page(page); totalhigh_pages++; } @@ -292,7 +292,7 @@ void free_initrd_mem(unsigned long start, unsigned long end) for (; start < end; start += PAGE_SIZE) { ClearPageReserved(virt_to_page(start)); - set_page_count(virt_to_page(start), 1); + init_page_count(virt_to_page(start)); free_page(start); totalram_pages++; } @@ -315,7 +315,7 @@ void free_initmem(void) page = addr; #endif ClearPageReserved(virt_to_page(page)); - set_page_count(virt_to_page(page), 1); + init_page_count(virt_to_page(page)); free_page(page); totalram_pages++; freed += PAGE_SIZE; diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c index ed93a979295..e0d095daa5e 100644 --- a/arch/mips/sgi-ip27/ip27-memory.c +++ b/arch/mips/sgi-ip27/ip27-memory.c @@ -559,7 +559,7 @@ void __init mem_init(void) /* if (!page_is_ram(pgnr)) continue; */ /* commented out until page_is_ram works */ ClearPageReserved(p); - set_page_count(p, 1); + init_page_count(p); __free_page(p); totalram_pages++; } diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c index 7847ca13d6c..852eda3953d 100644 --- a/arch/parisc/mm/init.c +++ b/arch/parisc/mm/init.c @@ -398,7 +398,7 @@ void free_initmem(void) addr = (unsigned long)(&__init_begin); for (; addr < (unsigned long)(&__init_end); addr += PAGE_SIZE) { ClearPageReserved(virt_to_page(addr)); - set_page_count(virt_to_page(addr), 1); + init_page_count(virt_to_page(addr)); free_page(addr); num_physpages++; totalram_pages++; @@ -1018,7 +1018,7 @@ void free_initrd_mem(unsigned long start, unsigned long end) printk(KERN_INFO "Freeing initrd memory: %ldk freed\n", (end - start) >> 10); for (; start < end; start += PAGE_SIZE) { ClearPageReserved(virt_to_page(start)); - set_page_count(virt_to_page(start), 1); + init_page_count(virt_to_page(start)); free_page(start); num_physpages++; totalram_pages++; diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c index 7d0d75c1184..b57fb3a2b7b 100644 --- a/arch/powerpc/mm/init_32.c +++ b/arch/powerpc/mm/init_32.c @@ -216,7 +216,7 @@ static void free_sec(unsigned long start, unsigned long end, const char *name) while (start < end) { ClearPageReserved(virt_to_page(start)); - set_page_count(virt_to_page(start), 1); + init_page_count(virt_to_page(start)); free_page(start); cnt++; start += PAGE_SIZE; @@ -248,7 +248,7 @@ void free_initrd_mem(unsigned long start, unsigned long end) printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10); for (; start < end; start += PAGE_SIZE) { ClearPageReserved(virt_to_page(start)); - set_page_count(virt_to_page(start), 1); + init_page_count(virt_to_page(start)); free_page(start); totalram_pages++; } diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index 81cfb0c2ec5..bacb71c8981 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -140,7 +140,7 @@ void free_initmem(void) for (; addr < (unsigned long)__init_end; addr += PAGE_SIZE) { memset((void *)addr, 0xcc, PAGE_SIZE); ClearPageReserved(virt_to_page(addr)); - set_page_count(virt_to_page(addr), 1); + init_page_count(virt_to_page(addr)); free_page(addr); totalram_pages++; } @@ -155,7 +155,7 @@ void free_initrd_mem(unsigned long start, unsigned long end) printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10); for (; start < end; start += PAGE_SIZE) { ClearPageReserved(virt_to_page(start)); - set_page_count(virt_to_page(start), 1); + init_page_count(virt_to_page(start)); free_page(start); totalram_pages++; } diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 6ae5c130d0d..454cac01d8c 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -108,7 +108,7 @@ EXPORT_SYMBOL(phys_mem_access_prot); void online_page(struct page *page) { ClearPageReserved(page); - set_page_count(page, 1); + init_page_count(page); __free_page(page); totalram_pages++; num_physpages++; @@ -376,7 +376,7 @@ void __init mem_init(void) struct page *page = pfn_to_page(pfn); ClearPageReserved(page); - set_page_count(page, 1); + init_page_count(page); __free_page(page); totalhigh_pages++; } diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c index b33a4443f5a..fec8e65b36e 100644 --- a/arch/powerpc/platforms/cell/setup.c +++ b/arch/powerpc/platforms/cell/setup.c @@ -115,7 +115,7 @@ static void __init cell_spuprop_present(struct device_node *spe, for (pfn = start_pfn; pfn < end_pfn; pfn++) { struct page *page = pfn_to_page(pfn); set_page_links(page, ZONE_DMA, node_id, pfn); - set_page_count(page, 1); + init_page_count(page); reset_page_mapcount(page); SetPageReserved(page); INIT_LIST_HEAD(&page->lru); diff --git a/arch/ppc/mm/init.c b/arch/ppc/mm/init.c index 134db5c0420..cb1c294fb93 100644 --- a/arch/ppc/mm/init.c +++ b/arch/ppc/mm/init.c @@ -140,7 +140,7 @@ static void free_sec(unsigned long start, unsigned long end, const char *name) while (start < end) { ClearPageReserved(virt_to_page(start)); - set_page_count(virt_to_page(start), 1); + init_page_count(virt_to_page(start)); free_page(start); cnt++; start += PAGE_SIZE; @@ -172,7 +172,7 @@ void free_initrd_mem(unsigned long start, unsigned long end) for (; start < end; start += PAGE_SIZE) { ClearPageReserved(virt_to_page(start)); - set_page_count(virt_to_page(start), 1); + init_page_count(virt_to_page(start)); free_page(start); totalram_pages++; } @@ -441,7 +441,7 @@ void __init mem_init(void) struct page *page = mem_map + pfn; ClearPageReserved(page); - set_page_count(page, 1); + init_page_count(page); __free_page(page); totalhigh_pages++; } diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c index df953383724..a055894f3bd 100644 --- a/arch/s390/mm/init.c +++ b/arch/s390/mm/init.c @@ -292,7 +292,7 @@ void free_initmem(void) addr = (unsigned long)(&__init_begin); for (; addr < (unsigned long)(&__init_end); addr += PAGE_SIZE) { ClearPageReserved(virt_to_page(addr)); - set_page_count(virt_to_page(addr), 1); + init_page_count(virt_to_page(addr)); free_page(addr); totalram_pages++; } @@ -307,7 +307,7 @@ void free_initrd_mem(unsigned long start, unsigned long end) printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10); for (; start < end; start += PAGE_SIZE) { ClearPageReserved(virt_to_page(start)); - set_page_count(virt_to_page(start), 1); + init_page_count(virt_to_page(start)); free_page(start); totalram_pages++; } diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c index e342565f75f..77b4a838fe1 100644 --- a/arch/sh/mm/init.c +++ b/arch/sh/mm/init.c @@ -273,7 +273,7 @@ void free_initmem(void) addr = (unsigned long)(&__init_begin); for (; addr < (unsigned long)(&__init_end); addr += PAGE_SIZE) { ClearPageReserved(virt_to_page(addr)); - set_page_count(virt_to_page(addr), 1); + init_page_count(virt_to_page(addr)); free_page(addr); totalram_pages++; } @@ -286,7 +286,7 @@ void free_initrd_mem(unsigned long start, unsigned long end) unsigned long p; for (p = start; p < end; p += PAGE_SIZE) { ClearPageReserved(virt_to_page(p)); - set_page_count(virt_to_page(p), 1); + init_page_count(virt_to_page(p)); free_page(p); totalram_pages++; } diff --git a/arch/sh64/mm/init.c b/arch/sh64/mm/init.c index a65e8bb2c3c..1169757fb38 100644 --- a/arch/sh64/mm/init.c +++ b/arch/sh64/mm/init.c @@ -173,7 +173,7 @@ void free_initmem(void) addr = (unsigned long)(&__init_begin); for (; addr < (unsigned long)(&__init_end); addr += PAGE_SIZE) { ClearPageReserved(virt_to_page(addr)); - set_page_count(virt_to_page(addr), 1); + init_page_count(virt_to_page(addr)); free_page(addr); totalram_pages++; } @@ -186,7 +186,7 @@ void free_initrd_mem(unsigned long start, unsigned long end) unsigned long p; for (p = start; p < end; p += PAGE_SIZE) { ClearPageReserved(virt_to_page(p)); - set_page_count(virt_to_page(p), 1); + init_page_count(virt_to_page(p)); free_page(p); totalram_pages++; } diff --git a/arch/sparc/kernel/sun4d_smp.c b/arch/sparc/kernel/sun4d_smp.c index 40d426cce82..4219dd2ce3a 100644 --- a/arch/sparc/kernel/sun4d_smp.c +++ b/arch/sparc/kernel/sun4d_smp.c @@ -266,19 +266,19 @@ void __init smp4d_boot_cpus(void) /* Free unneeded trap tables */ ClearPageReserved(virt_to_page(trapbase_cpu1)); - set_page_count(virt_to_page(trapbase_cpu1), 1); + init_page_count(virt_to_page(trapbase_cpu1)); free_page((unsigned long)trapbase_cpu1); totalram_pages++; num_physpages++; ClearPageReserved(virt_to_page(trapbase_cpu2)); - set_page_count(virt_to_page(trapbase_cpu2), 1); + init_page_count(virt_to_page(trapbase_cpu2)); free_page((unsigned long)trapbase_cpu2); totalram_pages++; num_physpages++; ClearPageReserved(virt_to_page(trapbase_cpu3)); - set_page_count(virt_to_page(trapbase_cpu3), 1); + init_page_count(virt_to_page(trapbase_cpu3)); free_page((unsigned long)trapbase_cpu3); totalram_pages++; num_physpages++; diff --git a/arch/sparc/kernel/sun4m_smp.c b/arch/sparc/kernel/sun4m_smp.c index a21f27d10e5..fbbd8a474c4 100644 --- a/arch/sparc/kernel/sun4m_smp.c +++ b/arch/sparc/kernel/sun4m_smp.c @@ -233,21 +233,21 @@ void __init smp4m_boot_cpus(void) /* Free unneeded trap tables */ if (!cpu_isset(i, cpu_present_map)) { ClearPageReserved(virt_to_page(trapbase_cpu1)); - set_page_count(virt_to_page(trapbase_cpu1), 1); + init_page_count(virt_to_page(trapbase_cpu1)); free_page((unsigned long)trapbase_cpu1); totalram_pages++; num_physpages++; } if (!cpu_isset(2, cpu_present_map)) { ClearPageReserved(virt_to_page(trapbase_cpu2)); - set_page_count(virt_to_page(trapbase_cpu2), 1); + init_page_count(virt_to_page(trapbase_cpu2)); free_page((unsigned long)trapbase_cpu2); totalram_pages++; num_physpages++; } if (!cpu_isset(3, cpu_present_map)) { ClearPageReserved(virt_to_page(trapbase_cpu3)); - set_page_count(virt_to_page(trapbase_cpu3), 1); + init_page_count(virt_to_page(trapbase_cpu3)); free_page((unsigned long)trapbase_cpu3); totalram_pages++; num_physpages++; diff --git a/arch/sparc/mm/init.c b/arch/sparc/mm/init.c index c03babaa049..89866973246 100644 --- a/arch/sparc/mm/init.c +++ b/arch/sparc/mm/init.c @@ -383,7 +383,7 @@ void map_high_region(unsigned long start_pfn, unsigned long end_pfn) struct page *page = pfn_to_page(tmp); ClearPageReserved(page); - set_page_count(page, 1); + init_page_count(page); __free_page(page); totalhigh_pages++; } @@ -480,7 +480,7 @@ void free_initmem (void) p = virt_to_page(addr); ClearPageReserved(p); - set_page_count(p, 1); + init_page_count(p); __free_page(p); totalram_pages++; num_physpages++; @@ -497,7 +497,7 @@ void free_initrd_mem(unsigned long start, unsigned long end) struct page *p = virt_to_page(start); ClearPageReserved(p); - set_page_count(p, 1); + init_page_count(p); __free_page(p); num_physpages++; } diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index c2b556106fc..2ae143ba50d 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -1461,7 +1461,7 @@ void free_initmem(void) p = virt_to_page(page); ClearPageReserved(p); - set_page_count(p, 1); + init_page_count(p); __free_page(p); num_physpages++; totalram_pages++; @@ -1477,7 +1477,7 @@ void free_initrd_mem(unsigned long start, unsigned long end) struct page *p = virt_to_page(start); ClearPageReserved(p); - set_page_count(p, 1); + init_page_count(p); __free_page(p); num_physpages++; totalram_pages++; diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c index fa4f915be5c..92cce96b5e2 100644 --- a/arch/um/kernel/mem.c +++ b/arch/um/kernel/mem.c @@ -57,7 +57,7 @@ static void setup_highmem(unsigned long highmem_start, for(i = 0; i < highmem_len >> PAGE_SHIFT; i++){ page = &mem_map[highmem_pfn + i]; ClearPageReserved(page); - set_page_count(page, 1); + init_page_count(page); __free_page(page); } } @@ -296,7 +296,7 @@ void free_initrd_mem(unsigned long start, unsigned long end) (end - start) >> 10); for (; start < end; start += PAGE_SIZE) { ClearPageReserved(virt_to_page(start)); - set_page_count(virt_to_page(start), 1); + init_page_count(virt_to_page(start)); free_page(start); totalram_pages++; } diff --git a/arch/x86_64/mm/init.c b/arch/x86_64/mm/init.c index 7af1742aa95..40ed13d263c 100644 --- a/arch/x86_64/mm/init.c +++ b/arch/x86_64/mm/init.c @@ -486,7 +486,7 @@ void __init clear_kernel_mapping(unsigned long address, unsigned long size) void online_page(struct page *page) { ClearPageReserved(page); - set_page_count(page, 1); + init_page_count(page); __free_page(page); totalram_pages++; num_physpages++; @@ -592,7 +592,7 @@ void free_initmem(void) addr = (unsigned long)(&__init_begin); for (; addr < (unsigned long)(&__init_end); addr += PAGE_SIZE) { ClearPageReserved(virt_to_page(addr)); - set_page_count(virt_to_page(addr), 1); + init_page_count(virt_to_page(addr)); memset((void *)(addr & ~(PAGE_SIZE-1)), 0xcc, PAGE_SIZE); free_page(addr); totalram_pages++; @@ -632,7 +632,7 @@ void free_initrd_mem(unsigned long start, unsigned long end) printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10); for (; start < end; start += PAGE_SIZE) { ClearPageReserved(virt_to_page(start)); - set_page_count(virt_to_page(start), 1); + init_page_count(virt_to_page(start)); free_page(start); totalram_pages++; } diff --git a/arch/xtensa/mm/init.c b/arch/xtensa/mm/init.c index 5a91d6c9e66..e1be4235f36 100644 --- a/arch/xtensa/mm/init.c +++ b/arch/xtensa/mm/init.c @@ -272,7 +272,7 @@ free_reserved_mem(void *start, void *end) { for (; start < end; start += PAGE_SIZE) { ClearPageReserved(virt_to_page(start)); - set_page_count(virt_to_page(start), 1); + init_page_count(virt_to_page(start)); free_page((unsigned long)start); totalram_pages++; } -- cgit v1.2.3-18-g5258 From a7290ee08e434399660ace34427c17696e47c562 Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Wed, 22 Mar 2006 00:08:44 -0800 Subject: [PATCH] Uninline sys_mmap common code (reduce binary size) Remove the inlining of the new vs old mmap system call common code. This reduces the size of the resulting vmlinux for defconfig as follows: mb@pc1:~/develop/git/linux-2.6$ size vmlinux.mmap* text data bss dec hex filename 3303749 521524 186564 4011837 3d373d vmlinux.mmapinline 3303557 521524 186564 4011645 3d367d vmlinux.mmapnoinline The new sys_mmap2() has also one function call overhead removed, now. (probably it was already optimized to a jmp before, but anyway...) Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/sys_i386.c | 25 +++++++++---------------- 1 file changed, 9 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/sys_i386.c b/arch/i386/kernel/sys_i386.c index a4a61976ecb..8fdb1fb17a5 100644 --- a/arch/i386/kernel/sys_i386.c +++ b/arch/i386/kernel/sys_i386.c @@ -40,14 +40,13 @@ asmlinkage int sys_pipe(unsigned long __user * fildes) return error; } -/* common code for old and new mmaps */ -static inline long do_mmap2( - unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) +asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, + unsigned long prot, unsigned long flags, + unsigned long fd, unsigned long pgoff) { int error = -EBADF; - struct file * file = NULL; + struct file *file = NULL; + struct mm_struct *mm = current->mm; flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); if (!(flags & MAP_ANONYMOUS)) { @@ -56,9 +55,9 @@ static inline long do_mmap2( goto out; } - down_write(¤t->mm->mmap_sem); + down_write(&mm->mmap_sem); error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); + up_write(&mm->mmap_sem); if (file) fput(file); @@ -66,13 +65,6 @@ out: return error; } -asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - return do_mmap2(addr, len, prot, flags, fd, pgoff); -} - /* * Perform the select(nd, in, out, ex, tv) and mmap() system * calls. Linux/i386 didn't use to be able to handle more than @@ -101,7 +93,8 @@ asmlinkage int old_mmap(struct mmap_arg_struct __user *arg) if (a.offset & ~PAGE_MASK) goto out; - err = do_mmap2(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT); + err = sys_mmap2(a.addr, a.len, a.prot, a.flags, + a.fd, a.offset >> PAGE_SHIFT); out: return err; } -- cgit v1.2.3-18-g5258 From 42b88befd6e0dae1a5fe04c03925037fa890e1f3 Mon Sep 17 00:00:00 2001 From: David Gibson Date: Wed, 22 Mar 2006 00:09:01 -0800 Subject: [PATCH] hugepage: is_aligned_hugepage_range() cleanup Quite a long time back, prepare_hugepage_range() replaced is_aligned_hugepage_range() as the callback from mm/mmap.c to arch code to verify if an address range is suitable for a hugepage mapping. is_aligned_hugepage_range() stuck around, but only to implement prepare_hugepage_range() on archs which didn't implement their own. Most archs (everything except ia64 and powerpc) used the same implementation of is_aligned_hugepage_range(). On powerpc, which implements its own prepare_hugepage_range(), the custom version was never used. In addition, "is_aligned_hugepage_range()" was a bad name, because it suggests it returns true iff the given range is a good hugepage range, whereas in fact it returns 0-or-error (so the sense is reversed). This patch cleans up by abolishing is_aligned_hugepage_range(). Instead prepare_hugepage_range() is defined directly. Most archs use the default version, which simply checks the given region is aligned to the size of a hugepage. ia64 and powerpc define custom versions. The ia64 one simply checks that the range is in the correct address space region in addition to being suitably aligned. The powerpc version (just as previously) checks for suitable addresses, and if necessary performs low-level MMU frobbing to set up new areas for use by hugepages. No libhugetlbfs testsuite regressions on ppc64 (POWER5 LPAR). Signed-off-by: David Gibson Signed-off-by: Zhang Yanmin Cc: "David S. Miller" Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: William Lee Irwin III Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/mm/hugetlbpage.c | 12 ------------ arch/ia64/mm/hugetlbpage.c | 5 +++-- arch/powerpc/mm/hugetlbpage.c | 15 --------------- arch/sh/mm/hugetlbpage.c | 12 ------------ arch/sh64/mm/hugetlbpage.c | 12 ------------ arch/sparc64/mm/hugetlbpage.c | 12 ------------ 6 files changed, 3 insertions(+), 65 deletions(-) (limited to 'arch') diff --git a/arch/i386/mm/hugetlbpage.c b/arch/i386/mm/hugetlbpage.c index d524127c9af..a7d89158541 100644 --- a/arch/i386/mm/hugetlbpage.c +++ b/arch/i386/mm/hugetlbpage.c @@ -48,18 +48,6 @@ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) return (pte_t *) pmd; } -/* - * This function checks for proper alignment of input addr and len parameters. - */ -int is_aligned_hugepage_range(unsigned long addr, unsigned long len) -{ - if (len & ~HPAGE_MASK) - return -EINVAL; - if (addr & ~HPAGE_MASK) - return -EINVAL; - return 0; -} - #if 0 /* This is just for testing */ struct page * follow_huge_addr(struct mm_struct *mm, unsigned long address, int write) diff --git a/arch/ia64/mm/hugetlbpage.c b/arch/ia64/mm/hugetlbpage.c index 2d13889d0a9..9dbc7dadd16 100644 --- a/arch/ia64/mm/hugetlbpage.c +++ b/arch/ia64/mm/hugetlbpage.c @@ -68,9 +68,10 @@ huge_pte_offset (struct mm_struct *mm, unsigned long addr) #define mk_pte_huge(entry) { pte_val(entry) |= _PAGE_P; } /* - * This function checks for proper alignment of input addr and len parameters. + * Don't actually need to do any preparation, but need to make sure + * the address is in the right region. */ -int is_aligned_hugepage_range(unsigned long addr, unsigned long len) +int prepare_hugepage_range(unsigned long addr, unsigned long len) { if (len & ~HPAGE_MASK) return -EINVAL; diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index b51bb28c054..7370f9f33e2 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -133,21 +133,6 @@ pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, return __pte(old); } -/* - * This function checks for proper alignment of input addr and len parameters. - */ -int is_aligned_hugepage_range(unsigned long addr, unsigned long len) -{ - if (len & ~HPAGE_MASK) - return -EINVAL; - if (addr & ~HPAGE_MASK) - return -EINVAL; - if (! (within_hugepage_low_range(addr, len) - || within_hugepage_high_range(addr, len)) ) - return -EINVAL; - return 0; -} - struct slb_flush_info { struct mm_struct *mm; u16 newareas; diff --git a/arch/sh/mm/hugetlbpage.c b/arch/sh/mm/hugetlbpage.c index 6b7a7688c98..a3568fd5150 100644 --- a/arch/sh/mm/hugetlbpage.c +++ b/arch/sh/mm/hugetlbpage.c @@ -84,18 +84,6 @@ pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, return entry; } -/* - * This function checks for proper alignment of input addr and len parameters. - */ -int is_aligned_hugepage_range(unsigned long addr, unsigned long len) -{ - if (len & ~HPAGE_MASK) - return -EINVAL; - if (addr & ~HPAGE_MASK) - return -EINVAL; - return 0; -} - struct page *follow_huge_addr(struct mm_struct *mm, unsigned long address, int write) { diff --git a/arch/sh64/mm/hugetlbpage.c b/arch/sh64/mm/hugetlbpage.c index ed6a505b3ee..3d89f2a6c78 100644 --- a/arch/sh64/mm/hugetlbpage.c +++ b/arch/sh64/mm/hugetlbpage.c @@ -84,18 +84,6 @@ pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, return entry; } -/* - * This function checks for proper alignment of input addr and len parameters. - */ -int is_aligned_hugepage_range(unsigned long addr, unsigned long len) -{ - if (len & ~HPAGE_MASK) - return -EINVAL; - if (addr & ~HPAGE_MASK) - return -EINVAL; - return 0; -} - struct page *follow_huge_addr(struct mm_struct *mm, unsigned long address, int write) { diff --git a/arch/sparc64/mm/hugetlbpage.c b/arch/sparc64/mm/hugetlbpage.c index a7a24869d04..280dc7958a1 100644 --- a/arch/sparc64/mm/hugetlbpage.c +++ b/arch/sparc64/mm/hugetlbpage.c @@ -263,18 +263,6 @@ pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, return entry; } -/* - * This function checks for proper alignment of input addr and len parameters. - */ -int is_aligned_hugepage_range(unsigned long addr, unsigned long len) -{ - if (len & ~HPAGE_MASK) - return -EINVAL; - if (addr & ~HPAGE_MASK) - return -EINVAL; - return 0; -} - struct page *follow_huge_addr(struct mm_struct *mm, unsigned long address, int write) { -- cgit v1.2.3-18-g5258 From bd115ea007e671e96b8b53c2e0e885103d39fd40 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 22 Mar 2006 20:14:09 +0000 Subject: [ARM] 3378/1: ixp2000: fix gpio interrupt handling Patch from Lennert Buytenhek ixp2000 used to initially mark GPIO interrupts as invalid, and not mark them valid until set_irq_type() was called, but this doesn't work if you want to use request_irq() with the SA_TRIGGER_* flags. So, just mark the GPIO interrupts valid from the beginning. We configure GPIOs as inputs when set_irq_type() is called anyway, so this shouldn't be a problem. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- arch/arm/mach-ixp2000/core.c | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c index cfd5bef3190..6e8d504aca5 100644 --- a/arch/arm/mach-ixp2000/core.c +++ b/arch/arm/mach-ixp2000/core.c @@ -288,8 +288,6 @@ void gpio_line_config(int line, int direction) local_irq_save(flags); if (direction == GPIO_OUT) { - irq_desc[line + IRQ_IXP2000_GPIO0].valid = 0; - /* if it's an output, it ain't an interrupt anymore */ GPIO_IRQ_falling_edge &= ~(1 << line); GPIO_IRQ_rising_edge &= ~(1 << line); @@ -351,11 +349,6 @@ static int ixp2000_GPIO_irq_type(unsigned int irq, unsigned int type) GPIO_IRQ_level_high &= ~(1 << line); update_gpio_int_csrs(); - /* - * Finally, mark the corresponding IRQ as valid. - */ - irq_desc[irq].valid = 1; - return 0; } @@ -506,14 +499,10 @@ void __init ixp2000_init_irq(void) } set_irq_chained_handler(IRQ_IXP2000_ERRSUM, ixp2000_err_irq_handler); - /* - * GPIO IRQs are invalid until someone sets the interrupt mode - * by calling set_irq_type(). - */ for (irq = IRQ_IXP2000_GPIO0; irq <= IRQ_IXP2000_GPIO7; irq++) { set_irq_chip(irq, &ixp2000_GPIO_irq_chip); set_irq_handler(irq, do_level_IRQ); - set_irq_flags(irq, 0); + set_irq_flags(irq, IRQF_VALID); } set_irq_chained_handler(IRQ_IXP2000_GPIO, ixp2000_GPIO_irq_handler); -- cgit v1.2.3-18-g5258 From 112d02e8d556ea0512afcfc3b0110c87ec9eb5f9 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 22 Mar 2006 20:14:12 +0000 Subject: [ARM] 3382/1: ixp2000: unify defconfigs Patch from Lennert Buytenhek Unify the five existing ixp2000 defconfigs into one defconfig. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- arch/arm/configs/enp2611_defconfig | 974 --------------------------------- arch/arm/configs/ixdp2400_defconfig | 975 --------------------------------- arch/arm/configs/ixdp2401_defconfig | 976 --------------------------------- arch/arm/configs/ixdp2800_defconfig | 975 --------------------------------- arch/arm/configs/ixdp2801_defconfig | 976 --------------------------------- arch/arm/configs/ixp2000_defconfig | 1006 +++++++++++++++++++++++++++++++++++ 6 files changed, 1006 insertions(+), 4876 deletions(-) delete mode 100644 arch/arm/configs/enp2611_defconfig delete mode 100644 arch/arm/configs/ixdp2400_defconfig delete mode 100644 arch/arm/configs/ixdp2401_defconfig delete mode 100644 arch/arm/configs/ixdp2800_defconfig delete mode 100644 arch/arm/configs/ixdp2801_defconfig create mode 100644 arch/arm/configs/ixp2000_defconfig (limited to 'arch') diff --git a/arch/arm/configs/enp2611_defconfig b/arch/arm/configs/enp2611_defconfig deleted file mode 100644 index 5fdaf3ce9d5..00000000000 --- a/arch/arm/configs/enp2611_defconfig +++ /dev/null @@ -1,974 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-git13 -# Thu Nov 10 15:12:48 2005 -# -CONFIG_ARM=y -CONFIG_MMU=y -CONFIG_UID16=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_CALIBRATE_DELAY=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_EMBEDDED=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# System Type -# -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -# CONFIG_ARCH_IXP4XX is not set -CONFIG_ARCH_IXP2000=y -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_AAEC2000 is not set -CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y - -# -# Intel IXP2400/2800 Implementation Options -# - -# -# IXP2400/2800 Platforms -# -CONFIG_ARCH_ENP2611=y -# CONFIG_ARCH_IXDP2400 is not set -# CONFIG_ARCH_IXDP2800 is not set -# CONFIG_ARCH_IXDP2401 is not set -# CONFIG_ARCH_IXDP2801 is not set -# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_XSCALE=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WBI=y - -# -# Processor Features -# -# CONFIG_ARM_THUMB is not set -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_XSCALE_PMU=y - -# -# Bus support -# -CONFIG_ISA_DMA_API=y -CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y -# CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -# CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4096 -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0" -# CONFIG_XIP_KERNEL is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -CONFIG_FPE_NWFPE_XP=y -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set -# CONFIG_ARTHUR is not set - -# -# Power management options -# -# CONFIG_PM is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y -CONFIG_MTD_REDBOOT_PARTS_READONLY=y -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_ARM_INTEGRATOR is not set -CONFIG_MTD_IXP2000=y -# CONFIG_MTD_PCI is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# -# CONFIG_MTD_ONENAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -CONFIG_EEPRO100=y -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -CONFIG_WAN=y -# CONFIG_DSCC4 is not set -# CONFIG_LANMEDIA is not set -# CONFIG_SYNCLINK_SYNCPPP is not set -CONFIG_HDLC=y -CONFIG_HDLC_RAW=y -# CONFIG_HDLC_RAW_ETH is not set -CONFIG_HDLC_CISCO=y -CONFIG_HDLC_FR=y -CONFIG_HDLC_PPP=y - -# -# X.25/LAPB support is disabled -# -# CONFIG_PCI200SYN is not set -# CONFIG_WANXL is not set -# CONFIG_PC300 is not set -# CONFIG_FARSYNC is not set -CONFIG_DLCI=y -CONFIG_DLCI_COUNT=24 -CONFIG_DLCI_MAX=8 -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=2 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_IXP2000_WATCHDOG=y - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_IXP2000=y -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -CONFIG_SENSORS_EEPROM=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -# CONFIG_EXT2_FS_SECURITY is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_POSIX_ACL=y -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_DEBUG_VM is not set -CONFIG_FRAME_POINTER=y -# CONFIG_RCU_TORTURE_TEST is not set -CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -# CONFIG_DEBUG_ICEDCC is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y diff --git a/arch/arm/configs/ixdp2400_defconfig b/arch/arm/configs/ixdp2400_defconfig deleted file mode 100644 index c67fc449a11..00000000000 --- a/arch/arm/configs/ixdp2400_defconfig +++ /dev/null @@ -1,975 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-git13 -# Thu Nov 10 15:14:13 2005 -# -CONFIG_ARM=y -CONFIG_MMU=y -CONFIG_UID16=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_CALIBRATE_DELAY=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_EMBEDDED=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# System Type -# -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -# CONFIG_ARCH_IXP4XX is not set -CONFIG_ARCH_IXP2000=y -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_AAEC2000 is not set -CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y - -# -# Intel IXP2400/2800 Implementation Options -# - -# -# IXP2400/2800 Platforms -# -# CONFIG_ARCH_ENP2611 is not set -CONFIG_ARCH_IXDP2400=y -# CONFIG_ARCH_IXDP2800 is not set -CONFIG_ARCH_IXDP2X00=y -# CONFIG_ARCH_IXDP2401 is not set -# CONFIG_ARCH_IXDP2801 is not set -# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_XSCALE=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WBI=y - -# -# Processor Features -# -# CONFIG_ARM_THUMB is not set -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_XSCALE_PMU=y - -# -# Bus support -# -CONFIG_ISA_DMA_API=y -CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y -# CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -# CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4096 -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0" -# CONFIG_XIP_KERNEL is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -CONFIG_FPE_NWFPE_XP=y -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set -# CONFIG_ARTHUR is not set - -# -# Power management options -# -# CONFIG_PM is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y -CONFIG_MTD_REDBOOT_PARTS_READONLY=y -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_ARM_INTEGRATOR is not set -CONFIG_MTD_IXP2000=y -# CONFIG_MTD_PCI is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# -# CONFIG_MTD_ONENAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -CONFIG_EEPRO100=y -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -CONFIG_WAN=y -# CONFIG_DSCC4 is not set -# CONFIG_LANMEDIA is not set -# CONFIG_SYNCLINK_SYNCPPP is not set -CONFIG_HDLC=y -CONFIG_HDLC_RAW=y -# CONFIG_HDLC_RAW_ETH is not set -CONFIG_HDLC_CISCO=y -CONFIG_HDLC_FR=y -CONFIG_HDLC_PPP=y - -# -# X.25/LAPB support is disabled -# -# CONFIG_PCI200SYN is not set -# CONFIG_WANXL is not set -# CONFIG_PC300 is not set -# CONFIG_FARSYNC is not set -CONFIG_DLCI=y -CONFIG_DLCI_COUNT=24 -CONFIG_DLCI_MAX=8 -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=1 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_IXP2000_WATCHDOG=y - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_IXP2000=y -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -CONFIG_SENSORS_EEPROM=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -# CONFIG_EXT2_FS_SECURITY is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_POSIX_ACL=y -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_DEBUG_VM is not set -CONFIG_FRAME_POINTER=y -# CONFIG_RCU_TORTURE_TEST is not set -CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -# CONFIG_DEBUG_ICEDCC is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y diff --git a/arch/arm/configs/ixdp2401_defconfig b/arch/arm/configs/ixdp2401_defconfig deleted file mode 100644 index 60d66e82c51..00000000000 --- a/arch/arm/configs/ixdp2401_defconfig +++ /dev/null @@ -1,976 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-git13 -# Thu Nov 10 15:14:50 2005 -# -CONFIG_ARM=y -CONFIG_MMU=y -CONFIG_UID16=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_CALIBRATE_DELAY=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_EMBEDDED=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# System Type -# -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -# CONFIG_ARCH_IXP4XX is not set -CONFIG_ARCH_IXP2000=y -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_AAEC2000 is not set -CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y - -# -# Intel IXP2400/2800 Implementation Options -# - -# -# IXP2400/2800 Platforms -# -# CONFIG_ARCH_ENP2611 is not set -# CONFIG_ARCH_IXDP2400 is not set -# CONFIG_ARCH_IXDP2800 is not set -CONFIG_ARCH_IXDP2401=y -# CONFIG_ARCH_IXDP2801 is not set -CONFIG_ARCH_IXDP2X01=y -# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_XSCALE=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WBI=y - -# -# Processor Features -# -# CONFIG_ARM_THUMB is not set -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_XSCALE_PMU=y - -# -# Bus support -# -CONFIG_ISA_DMA_API=y -CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y -# CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -# CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4096 -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0" -# CONFIG_XIP_KERNEL is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -CONFIG_FPE_NWFPE_XP=y -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set -# CONFIG_ARTHUR is not set - -# -# Power management options -# -# CONFIG_PM is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y -CONFIG_MTD_REDBOOT_PARTS_READONLY=y -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_ARM_INTEGRATOR is not set -CONFIG_MTD_IXP2000=y -# CONFIG_MTD_PCI is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# -# CONFIG_MTD_ONENAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -CONFIG_CS89x0=y -# CONFIG_DGRS is not set -CONFIG_EEPRO100=y -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -CONFIG_WAN=y -# CONFIG_DSCC4 is not set -# CONFIG_LANMEDIA is not set -# CONFIG_SYNCLINK_SYNCPPP is not set -CONFIG_HDLC=y -CONFIG_HDLC_RAW=y -# CONFIG_HDLC_RAW_ETH is not set -CONFIG_HDLC_CISCO=y -CONFIG_HDLC_FR=y -CONFIG_HDLC_PPP=y - -# -# X.25/LAPB support is disabled -# -# CONFIG_PCI200SYN is not set -# CONFIG_WANXL is not set -# CONFIG_PC300 is not set -# CONFIG_FARSYNC is not set -CONFIG_DLCI=y -CONFIG_DLCI_COUNT=24 -CONFIG_DLCI_MAX=8 -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=3 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_IXP2000_WATCHDOG=y - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_IXP2000=y -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -CONFIG_SENSORS_EEPROM=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -# CONFIG_EXT2_FS_SECURITY is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_POSIX_ACL=y -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_DEBUG_VM is not set -CONFIG_FRAME_POINTER=y -# CONFIG_RCU_TORTURE_TEST is not set -CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -# CONFIG_DEBUG_ICEDCC is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y diff --git a/arch/arm/configs/ixdp2800_defconfig b/arch/arm/configs/ixdp2800_defconfig deleted file mode 100644 index 4248123815e..00000000000 --- a/arch/arm/configs/ixdp2800_defconfig +++ /dev/null @@ -1,975 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-git13 -# Thu Nov 10 15:14:56 2005 -# -CONFIG_ARM=y -CONFIG_MMU=y -CONFIG_UID16=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_CALIBRATE_DELAY=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_EMBEDDED=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# System Type -# -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -# CONFIG_ARCH_IXP4XX is not set -CONFIG_ARCH_IXP2000=y -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_AAEC2000 is not set -CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y - -# -# Intel IXP2400/2800 Implementation Options -# - -# -# IXP2400/2800 Platforms -# -# CONFIG_ARCH_ENP2611 is not set -# CONFIG_ARCH_IXDP2400 is not set -CONFIG_ARCH_IXDP2800=y -CONFIG_ARCH_IXDP2X00=y -# CONFIG_ARCH_IXDP2401 is not set -# CONFIG_ARCH_IXDP2801 is not set -# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_XSCALE=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WBI=y - -# -# Processor Features -# -# CONFIG_ARM_THUMB is not set -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_XSCALE_PMU=y - -# -# Bus support -# -CONFIG_ISA_DMA_API=y -CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y -# CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -# CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4096 -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,9600 root=/dev/nfs ip=bootp mem=64M@0x0" -# CONFIG_XIP_KERNEL is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -CONFIG_FPE_NWFPE_XP=y -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set -# CONFIG_ARTHUR is not set - -# -# Power management options -# -# CONFIG_PM is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y -CONFIG_MTD_REDBOOT_PARTS_READONLY=y -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_ARM_INTEGRATOR is not set -CONFIG_MTD_IXP2000=y -# CONFIG_MTD_PCI is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# -# CONFIG_MTD_ONENAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -CONFIG_EEPRO100=y -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -CONFIG_WAN=y -# CONFIG_DSCC4 is not set -# CONFIG_LANMEDIA is not set -# CONFIG_SYNCLINK_SYNCPPP is not set -CONFIG_HDLC=y -CONFIG_HDLC_RAW=y -# CONFIG_HDLC_RAW_ETH is not set -CONFIG_HDLC_CISCO=y -CONFIG_HDLC_FR=y -CONFIG_HDLC_PPP=y - -# -# X.25/LAPB support is disabled -# -# CONFIG_PCI200SYN is not set -# CONFIG_WANXL is not set -# CONFIG_PC300 is not set -# CONFIG_FARSYNC is not set -CONFIG_DLCI=y -CONFIG_DLCI_COUNT=24 -CONFIG_DLCI_MAX=8 -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=1 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_IXP2000_WATCHDOG=y - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_IXP2000=y -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -CONFIG_SENSORS_EEPROM=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -# CONFIG_EXT2_FS_SECURITY is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_POSIX_ACL=y -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_DEBUG_VM is not set -CONFIG_FRAME_POINTER=y -# CONFIG_RCU_TORTURE_TEST is not set -CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -# CONFIG_DEBUG_ICEDCC is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y diff --git a/arch/arm/configs/ixdp2801_defconfig b/arch/arm/configs/ixdp2801_defconfig deleted file mode 100644 index f54f3dcc5b3..00000000000 --- a/arch/arm/configs/ixdp2801_defconfig +++ /dev/null @@ -1,976 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-git13 -# Thu Nov 10 15:15:03 2005 -# -CONFIG_ARM=y -CONFIG_MMU=y -CONFIG_UID16=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_CALIBRATE_DELAY=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_EMBEDDED=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# System Type -# -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -# CONFIG_ARCH_IXP4XX is not set -CONFIG_ARCH_IXP2000=y -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_AAEC2000 is not set -CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y - -# -# Intel IXP2400/2800 Implementation Options -# - -# -# IXP2400/2800 Platforms -# -# CONFIG_ARCH_ENP2611 is not set -# CONFIG_ARCH_IXDP2400 is not set -# CONFIG_ARCH_IXDP2800 is not set -# CONFIG_ARCH_IXDP2401 is not set -CONFIG_ARCH_IXDP2801=y -CONFIG_ARCH_IXDP2X01=y -# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_XSCALE=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WBI=y - -# -# Processor Features -# -# CONFIG_ARM_THUMB is not set -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_XSCALE_PMU=y - -# -# Bus support -# -CONFIG_ISA_DMA_API=y -CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y -# CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -# CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4096 -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0" -# CONFIG_XIP_KERNEL is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -CONFIG_FPE_NWFPE_XP=y -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set -# CONFIG_ARTHUR is not set - -# -# Power management options -# -# CONFIG_PM is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y -CONFIG_MTD_REDBOOT_PARTS_READONLY=y -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_ARM_INTEGRATOR is not set -CONFIG_MTD_IXP2000=y -# CONFIG_MTD_PCI is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# -# CONFIG_MTD_ONENAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -CONFIG_CS89x0=y -# CONFIG_DGRS is not set -CONFIG_EEPRO100=y -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -CONFIG_WAN=y -# CONFIG_DSCC4 is not set -# CONFIG_LANMEDIA is not set -# CONFIG_SYNCLINK_SYNCPPP is not set -CONFIG_HDLC=y -CONFIG_HDLC_RAW=y -# CONFIG_HDLC_RAW_ETH is not set -CONFIG_HDLC_CISCO=y -CONFIG_HDLC_FR=y -CONFIG_HDLC_PPP=y - -# -# X.25/LAPB support is disabled -# -# CONFIG_PCI200SYN is not set -# CONFIG_WANXL is not set -# CONFIG_PC300 is not set -# CONFIG_FARSYNC is not set -CONFIG_DLCI=y -CONFIG_DLCI_COUNT=24 -CONFIG_DLCI_MAX=8 -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=3 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_IXP2000_WATCHDOG=y - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_IXP2000=y -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -CONFIG_SENSORS_EEPROM=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -# CONFIG_EXT2_FS_SECURITY is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_POSIX_ACL=y -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_DEBUG_VM is not set -CONFIG_FRAME_POINTER=y -# CONFIG_RCU_TORTURE_TEST is not set -CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -# CONFIG_DEBUG_ICEDCC is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y diff --git a/arch/arm/configs/ixp2000_defconfig b/arch/arm/configs/ixp2000_defconfig new file mode 100644 index 00000000000..7b02ca04c3e --- /dev/null +++ b/arch/arm/configs/ixp2000_defconfig @@ -0,0 +1,1006 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.16-rc2 +# Wed Feb 8 04:49:11 2006 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_UID16=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set +CONFIG_OBSOLETE_INTERMODULE=y + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IXP4XX is not set +CONFIG_ARCH_IXP2000=y +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_AT91RM9200 is not set +CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y + +# +# Intel IXP2400/2800 Implementation Options +# + +# +# IXP2400/2800 Platforms +# +CONFIG_ARCH_ENP2611=y +CONFIG_ARCH_IXDP2400=y +CONFIG_ARCH_IXDP2800=y +CONFIG_ARCH_IXDP2X00=y +CONFIG_ARCH_IXDP2401=y +CONFIG_ARCH_IXDP2801=y +CONFIG_ARCH_IXDP2X01=y +# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +CONFIG_CPU_BIG_ENDIAN=y +CONFIG_XSCALE_PMU=y + +# +# Bus support +# +CONFIG_PCI=y +CONFIG_PCI_LEGACY_PROC=y +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +CONFIG_FPE_NWFPE_XP=y +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set +# CONFIG_APM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y +CONFIG_MTD_REDBOOT_PARTS_READONLY=y +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_IXP2000=y +# CONFIG_MTD_PCI is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +CONFIG_DUMMY=y +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +CONFIG_CS89x0=y +# CONFIG_DGRS is not set +CONFIG_EEPRO100=y +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +CONFIG_ENP2611_MSF_NET=y +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +CONFIG_WAN=y +# CONFIG_DSCC4 is not set +# CONFIG_LANMEDIA is not set +# CONFIG_SYNCLINK_SYNCPPP is not set +CONFIG_HDLC=y +CONFIG_HDLC_RAW=y +# CONFIG_HDLC_RAW_ETH is not set +CONFIG_HDLC_CISCO=y +CONFIG_HDLC_FR=y +CONFIG_HDLC_PPP=y + +# +# X.25/LAPB support is disabled +# +# CONFIG_PCI200SYN is not set +# CONFIG_WANXL is not set +# CONFIG_PC300 is not set +# CONFIG_FARSYNC is not set +CONFIG_DLCI=y +CONFIG_DLCI_COUNT=24 +CONFIG_DLCI_MAX=8 +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=3 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_IXP2000_WATCHDOG=y + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_IXP2000=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_DEBUG_USER=y +# CONFIG_DEBUG_WAITQ is not set +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y -- cgit v1.2.3-18-g5258 From 39806805de0314d5847bfd6d046ad7d4407ccd46 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Wed, 22 Mar 2006 20:14:13 +0000 Subject: [ARM] 3384/1: AT91RM9200: Timer Patch from Andrew Victor If the timer interrupt is ever significantly delayed (or after the system was suspended), the system could spin incrementing the time for too long. The fix is to replace the "do {} while" with a "while {}". Orignal patch by Savin Zlobec and Peter Menzebach. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91rm9200/time.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91rm9200/time.c b/arch/arm/mach-at91rm9200/time.c index 1b6dd2deeb2..7ffcf443b99 100644 --- a/arch/arm/mach-at91rm9200/time.c +++ b/arch/arm/mach-at91rm9200/time.c @@ -71,11 +71,11 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id, struct pt_r if (at91_sys_read(AT91_ST_SR) & AT91_ST_PITS) { /* This is a shared interrupt */ write_seqlock(&xtime_lock); - do { + while (((read_CRTR() - at91_sys_read(AT91_ST_RTAR)) & AT91_ST_ALMV) >= LATCH) { timer_tick(regs); rtar = (at91_sys_read(AT91_ST_RTAR) + LATCH) & AT91_ST_ALMV; at91_sys_write(AT91_ST_RTAR, rtar); - } while (((read_CRTR() - at91_sys_read(AT91_ST_RTAR)) & AT91_ST_ALMV) >= LATCH); + } write_sequnlock(&xtime_lock); -- cgit v1.2.3-18-g5258 From 69b648a200b27a7c8ea92993bf5b4d40e83b5403 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Wed, 22 Mar 2006 20:14:14 +0000 Subject: [ARM] 3386/1: AT91RM9200 Clock update Patch from Andrew Victor This patch includes a few changes to the clock support on the AT91RM9200. 1. Added definitions for Ethernet, MMC, TWI, USARTs, and SPI peripheral clocks. 2. Replaced some hard-coded hex values with the text definitions in at91rm9200_sys.h. 3. If the USB96M bit is set for PLLB, then the rate of PLLB is not affected but only the USB Host/Device clocks which are derived from it. Issue reported by Sergei Sharonov. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91rm9200/clock.c | 85 ++++++++++++++++++++++++++++++++++------ 1 file changed, 73 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91rm9200/clock.c b/arch/arm/mach-at91rm9200/clock.c index ec8195a2a3c..8b95467c6d6 100644 --- a/arch/arm/mach-at91rm9200/clock.c +++ b/arch/arm/mach-at91rm9200/clock.c @@ -201,6 +201,54 @@ static struct clk ohci_clk = { .pmc_mask = 1 << AT91_ID_UHP, .mode = pmc_periph_mode, }; +static struct clk ether_clk = { + .name = "ether_clk", + .parent = &mck, + .pmc_mask = 1 << AT91_ID_EMAC, + .mode = pmc_periph_mode, +}; +static struct clk mmc_clk = { + .name = "mci_clk", + .parent = &mck, + .pmc_mask = 1 << AT91_ID_MCI, + .mode = pmc_periph_mode, +}; +static struct clk twi_clk = { + .name = "twi_clk", + .parent = &mck, + .pmc_mask = 1 << AT91_ID_TWI, + .mode = pmc_periph_mode, +}; +static struct clk usart0_clk = { + .name = "usart0_clk", + .parent = &mck, + .pmc_mask = 1 << AT91_ID_US0, + .mode = pmc_periph_mode, +}; +static struct clk usart1_clk = { + .name = "usart1_clk", + .parent = &mck, + .pmc_mask = 1 << AT91_ID_US1, + .mode = pmc_periph_mode, +}; +static struct clk usart2_clk = { + .name = "usart2_clk", + .parent = &mck, + .pmc_mask = 1 << AT91_ID_US2, + .mode = pmc_periph_mode, +}; +static struct clk usart3_clk = { + .name = "usart3_clk", + .parent = &mck, + .pmc_mask = 1 << AT91_ID_US3, + .mode = pmc_periph_mode, +}; +static struct clk spi_clk = { + .name = "spi0_clk", + .parent = &mck, + .pmc_mask = 1 << AT91_ID_SPI, + .mode = pmc_periph_mode, +}; static struct clk *const clock_list[] = { /* four primary clocks -- MUST BE FIRST! */ @@ -223,15 +271,18 @@ static struct clk *const clock_list[] = { /* MCK and peripherals */ &mck, - // usart0..usart3 - // mmc + &usart0_clk, + &usart1_clk, + &usart2_clk, + &usart3_clk, + &mmc_clk, &udc_clk, - // i2c - // spi + &twi_clk, + &spi_clk, // ssc0..ssc2 // tc0..tc5 &ohci_clk, - // ether + ðer_clk, }; @@ -360,7 +411,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate) u32 pckr; pckr = at91_sys_read(AT91_PMC_PCKR(clk->id)); - pckr &= 0x03; + pckr &= AT91_PMC_CSS_PLLB; /* clock selection */ pckr |= prescale << 2; at91_sys_write(AT91_PMC_PCKR(clk->id), pckr); clk->rate_hz = actual; @@ -440,7 +491,7 @@ static int at91_clk_show(struct seq_file *s, void *unused) else state = ""; - seq_printf(s, "%-10s users=%d %-3s %9ld Hz %s\n", + seq_printf(s, "%-10s users=%2d %-3s %9ld Hz %s\n", clk->name, clk->users, state, clk_get_rate(clk), clk->parent ? clk->parent->name : ""); } @@ -483,11 +534,18 @@ static u32 __init at91_pll_rate(struct clk *pll, u32 freq, u32 reg) freq *= mul + 1; } else freq = 0; - if (pll == &pllb && (reg & (1 << 28))) - freq /= 2; + return freq; } +static u32 __init at91_usb_rate(struct clk *pll, u32 freq, u32 reg) +{ + if (pll == &pllb && (reg & AT91_PMC_USB96M)) + return freq / 2; + else + return freq; +} + static unsigned __init at91_pll_calc(unsigned main_freq, unsigned out_freq) { unsigned i, div = 0, mul = 0, diff = 1 << 30; @@ -550,8 +608,8 @@ int __init at91_clock_init(unsigned long main_clock) if (!main_clock) { do { tmp = at91_sys_read(AT91_CKGR_MCFR); - } while (!(tmp & 0x10000)); - main_clock = (tmp & 0xffff) * (AT91_SLOW_CLOCK / 16); + } while (!(tmp & AT91_PMC_MAINRDY)); + main_clock = (tmp & AT91_PMC_MAINF) * (AT91_SLOW_CLOCK / 16); } main_clk.rate_hz = main_clock; @@ -566,13 +624,16 @@ int __init at91_clock_init(unsigned long main_clock) * * REVISIT: assumes MCK doesn't derive from PLLB! */ - at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | 0x10000000; + at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M; pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init); at91_sys_write(AT91_PMC_PCDR, (1 << AT91_ID_UHP) | (1 << AT91_ID_UDP)); at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP | AT91_PMC_UDP); at91_sys_write(AT91_CKGR_PLLBR, 0); at91_sys_write(AT91_PMC_SCER, AT91_PMC_MCKUDP); + udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init); + uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init); + /* * MCK and CPU derive from one of those primary clocks. * For now, assume this parentage won't change. -- cgit v1.2.3-18-g5258 From 3a2916aa289504d694072a98876d23ca31d6401e Mon Sep 17 00:00:00 2001 From: Erik Hovland Date: Wed, 22 Mar 2006 21:02:11 +0000 Subject: [ARM] 3389/1: typo and grammar fix Patch from Erik Hovland I found a typo and what seems to be a run-on sentence in arch/arm/common/dmabounce.c This patch corrects both. Signed-off-by: Erik Hovland Signed-off-by: Russell King --- arch/arm/common/dmabounce.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index ad6c89a555b..7971d0dc689 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -5,7 +5,7 @@ * limited DMA windows. These functions utilize bounce buffers to * copy data to/from buffers located outside the DMA region. This * only works for systems in which DMA memory is at the bottom of - * RAM and the remainder of memory is at the top an the DMA memory + * RAM, the remainder of memory is at the top and the DMA memory * can be marked as ZONE_DMA. Anything beyond that such as discontigous * DMA windows will require custom implementations that reserve memory * areas at early bootup. -- cgit v1.2.3-18-g5258 From 2332c9ae7911618575241e0c843cd686968db8e3 Mon Sep 17 00:00:00 2001 From: "Chen, Kenneth W" Date: Wed, 22 Mar 2006 10:49:00 -0800 Subject: [IA64] fix ia64 is_hugepage_only_range fix is_hugepage_only_range() definition to be "overlaps" instead of "within architectural restricted hugetlb address range". Simplify the ia64 specific code that used to use is_hugepage_only_range() to just check which region the address is in. Signed-off-by: Ken Chen Signed-off-by: Tony Luck --- arch/ia64/mm/hugetlbpage.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/ia64/mm/hugetlbpage.c b/arch/ia64/mm/hugetlbpage.c index 9dbc7dadd16..8d506710fdb 100644 --- a/arch/ia64/mm/hugetlbpage.c +++ b/arch/ia64/mm/hugetlbpage.c @@ -113,8 +113,7 @@ void hugetlb_free_pgd_range(struct mmu_gather **tlb, unsigned long floor, unsigned long ceiling) { /* - * This is called only when is_hugepage_only_range(addr,), - * and it follows that is_hugepage_only_range(end,) also. + * This is called to free hugetlb page tables. * * The offset of these addresses from the base of the hugetlb * region must be scaled down by HPAGE_SIZE/PAGE_SIZE so that @@ -126,9 +125,9 @@ void hugetlb_free_pgd_range(struct mmu_gather **tlb, addr = htlbpage_to_page(addr); end = htlbpage_to_page(end); - if (is_hugepage_only_range(tlb->mm, floor, HPAGE_SIZE)) + if (REGION_NUMBER(floor) == RGN_HPAGE) floor = htlbpage_to_page(floor); - if (is_hugepage_only_range(tlb->mm, ceiling, HPAGE_SIZE)) + if (REGION_NUMBER(ceiling) == RGN_HPAGE) ceiling = htlbpage_to_page(ceiling); free_pgd_range(tlb, addr, end, floor, ceiling); -- cgit v1.2.3-18-g5258 From 9a4e5549b7cb5d0ef187184641d8defe8be875f5 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 21 Mar 2006 10:44:07 -0700 Subject: [IA64] sn_check_intr: use ia64_get_irr() Use the recently-added ia64_get_irr() rather than duplicating the code. Signed-off-by: Bjorn Helgaas Acked-by: Jes Sorensen Signed-off-by: Tony Luck --- arch/ia64/sn/kernel/irq.c | 21 +-------------------- 1 file changed, 1 insertion(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/ia64/sn/kernel/irq.c b/arch/ia64/sn/kernel/irq.c index c373113d073..c265e02f503 100644 --- a/arch/ia64/sn/kernel/irq.c +++ b/arch/ia64/sn/kernel/irq.c @@ -350,9 +350,6 @@ static void force_interrupt(int irq) static void sn_check_intr(int irq, struct sn_irq_info *sn_irq_info) { u64 regval; - int irr_reg_num; - int irr_bit; - u64 irr_reg; struct pcidev_info *pcidev_info; struct pcibus_info *pcibus_info; @@ -373,23 +370,7 @@ static void sn_check_intr(int irq, struct sn_irq_info *sn_irq_info) pdi_pcibus_info; regval = pcireg_intr_status_get(pcibus_info); - irr_reg_num = irq_to_vector(irq) / 64; - irr_bit = irq_to_vector(irq) % 64; - switch (irr_reg_num) { - case 0: - irr_reg = ia64_getreg(_IA64_REG_CR_IRR0); - break; - case 1: - irr_reg = ia64_getreg(_IA64_REG_CR_IRR1); - break; - case 2: - irr_reg = ia64_getreg(_IA64_REG_CR_IRR2); - break; - case 3: - irr_reg = ia64_getreg(_IA64_REG_CR_IRR3); - break; - } - if (!test_bit(irr_bit, &irr_reg)) { + if (!ia64_get_irr(irq_to_vector(irq))) { if (!test_bit(irq, pda->sn_in_service_ivecs)) { regval &= 0xff; if (sn_irq_info->irq_int_bit & regval & -- cgit v1.2.3-18-g5258 From d903cea3811994d4c4122a0e3ca6d3a197e812e2 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Wed, 15 Mar 2006 14:45:11 +0900 Subject: [IA64] Ignore disabled Local SAPIC Affinity Structure in SRAT According to the ACPI spec, the OSPM must ignore the contents of the Processor Local APIC/SAPIC Affinity Structure in System Resource Affinity Table (SRAT), if its enable flag is cleared. However, ia64 linux refers all of the Processor Local APIC/SAPIC Affinity Structures in SRAT regardless of the enable flag. This is obviously against the ACPI spec. This patch fixes this bug. Signed-off-by: Kenji Kaneshige Signed-off-by: Tony Luck --- arch/ia64/kernel/acpi.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 4722ec51c70..24fe7c81e10 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -443,6 +443,9 @@ void __init acpi_numa_slit_init(struct acpi_table_slit *slit) void __init acpi_numa_processor_affinity_init(struct acpi_table_processor_affinity *pa) { + if (!pa->flags.enabled) + return; + /* record this node in proximity bitmap */ pxm_bit_set(pa->proximity_domain); -- cgit v1.2.3-18-g5258 From 0881fc8df2e2bf1a7900a0ab3860109beb46fbab Mon Sep 17 00:00:00 2001 From: "Chen, Kenneth W" Date: Sun, 12 Mar 2006 08:52:20 -0800 Subject: [IA64] add __init declaration to mca functions Mark init related variable and functions with appropriate __init* declaration to mca functions. Signed-off-by: Ken Chen Signed-off-by: Tony Luck --- arch/ia64/kernel/mca.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index b57e723f194..cedcae713e9 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -133,7 +133,7 @@ static int cpe_poll_enabled = 1; extern void salinfo_log_wakeup(int type, u8 *buffer, u64 size, int irqsafe); -static int mca_init; +static int mca_init __initdata; static void inline @@ -184,7 +184,7 @@ static ia64_state_log_t ia64_state_log[IA64_MAX_LOG_TYPES]; * Inputs : info_type (SAL_INFO_TYPE_{MCA,INIT,CMC,CPE}) * Outputs : None */ -static void +static void __init ia64_log_init(int sal_info_type) { u64 max_size = 0; @@ -355,7 +355,7 @@ ia64_mca_cpe_int_handler (int cpe_irq, void *arg, struct pt_regs *ptregs) * Outputs * None */ -static void +static void __init ia64_mca_register_cpev (int cpev) { /* Register the CPE interrupt vector with SAL */ @@ -386,7 +386,7 @@ ia64_mca_register_cpev (int cpev) * Outputs * None */ -void +void __cpuinit ia64_mca_cmc_vector_setup (void) { cmcv_reg_t cmcv; @@ -1443,7 +1443,7 @@ static struct irqaction mca_cpep_irqaction = { * format most of the fields. */ -static void +static void __cpuinit format_mca_init_stack(void *mca_data, unsigned long offset, const char *type, int cpu) { @@ -1467,7 +1467,7 @@ format_mca_init_stack(void *mca_data, unsigned long offset, /* Do per-CPU MCA-related initialization. */ -void __devinit +void __cpuinit ia64_mca_cpu_init(void *cpu_data) { void *pal_vaddr; -- cgit v1.2.3-18-g5258 From 244fd54540806a5e3391d117794105a35815cbb2 Mon Sep 17 00:00:00 2001 From: "Chen, Kenneth W" Date: Sun, 12 Mar 2006 09:00:13 -0800 Subject: [IA64] add init declaration to cpu initialization functions Add init declaration to cpu initialization functions. Signed-off-by: Ken Chen Signed-off-by: Tony Luck --- arch/ia64/kernel/setup.c | 12 ++++++------ arch/ia64/mm/contig.c | 2 +- arch/ia64/mm/discontig.c | 2 +- 3 files changed, 8 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index 3258e09278d..340dc0362fe 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -362,7 +362,7 @@ mark_bsp_online (void) } #ifdef CONFIG_SMP -static void +static void __init check_for_logical_procs (void) { pal_logical_to_physical_t info; @@ -623,7 +623,7 @@ struct seq_operations cpuinfo_op = { .show = show_cpuinfo }; -void +static void __cpuinit identify_cpu (struct cpuinfo_ia64 *c) { union { @@ -700,7 +700,7 @@ setup_per_cpu_areas (void) * In addition, the minimum of the i-cache stride sizes is calculated for * "flush_icache_range()". */ -static void +static void __cpuinit get_max_cacheline_size (void) { unsigned long line_size, max = 1; @@ -763,10 +763,10 @@ get_max_cacheline_size (void) * cpu_init() initializes state that is per-CPU. This function acts * as a 'CPU state barrier', nothing should get across. */ -void +void __cpuinit cpu_init (void) { - extern void __devinit ia64_mmu_init (void *); + extern void __cpuinit ia64_mmu_init (void *); unsigned long num_phys_stacked; pal_vm_info_2_u_t vmi; unsigned int max_ctx; @@ -894,7 +894,7 @@ void sched_cacheflush(void) ia64_sal_cache_flush(3); } -void +void __init check_bugs (void) { ia64_patch_mckinley_e9((unsigned long) __start___mckinley_e9_bundles, diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c index 9855ba31809..8abb9e86d8a 100644 --- a/arch/ia64/mm/contig.c +++ b/arch/ia64/mm/contig.c @@ -176,7 +176,7 @@ find_memory (void) * * Allocate and setup per-cpu data areas. */ -void * +void * __cpuinit per_cpu_init (void) { void *cpu_data; diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c index 573d5cc63e2..2f5e44862e9 100644 --- a/arch/ia64/mm/discontig.c +++ b/arch/ia64/mm/discontig.c @@ -525,7 +525,7 @@ void __init find_memory(void) * find_pernode_space() does most of this already, we just need to set * local_per_cpu_offset */ -void *per_cpu_init(void) +void __cpuinit *per_cpu_init(void) { int cpu; static int first_time = 1; -- cgit v1.2.3-18-g5258 From dae2806615c91cd7afa7c4dee65518435e45854a Mon Sep 17 00:00:00 2001 From: "Chen, Kenneth W" Date: Wed, 22 Mar 2006 16:54:15 -0800 Subject: [IA64] add init declaration to memory initialization functions Add init declaration to variables/functions used for memory initialization. I don't think they would clash with memory hotplug. If they do, please yell. Signed-off-by: Ken Chen Signed-off-by: Tony Luck --- arch/ia64/kernel/setup.c | 12 ++++++------ arch/ia64/mm/contig.c | 6 +++--- arch/ia64/mm/init.c | 12 ++++++------ 3 files changed, 15 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index 340dc0362fe..eb0793628b8 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -131,8 +131,8 @@ EXPORT_SYMBOL(ia64_max_iommu_merge_mask); /* * We use a special marker for the end of memory and it uses the extra (+1) slot */ -struct rsvd_region rsvd_region[IA64_MAX_RSVD_REGIONS + 1]; -int num_rsvd_regions; +struct rsvd_region rsvd_region[IA64_MAX_RSVD_REGIONS + 1] __initdata; +int num_rsvd_regions __initdata; /* @@ -141,7 +141,7 @@ int num_rsvd_regions; * caller-specified function is called with the memory ranges that remain after filtering. * This routine does not assume the incoming segments are sorted. */ -int +int __init filter_rsvd_memory (unsigned long start, unsigned long end, void *arg) { unsigned long range_start, range_end, prev_start; @@ -177,7 +177,7 @@ filter_rsvd_memory (unsigned long start, unsigned long end, void *arg) return 0; } -static void +static void __init sort_regions (struct rsvd_region *rsvd_region, int max) { int j; @@ -218,7 +218,7 @@ __initcall(register_memory); * initrd, etc. There are currently %IA64_MAX_RSVD_REGIONS defined, * see include/asm-ia64/meminit.h if you need to define more. */ -void +void __init reserve_memory (void) { int n = 0; @@ -270,7 +270,7 @@ reserve_memory (void) * Grab the initrd start and end from the boot parameter struct given us by * the boot loader. */ -void +void __init find_initrd (void) { #ifdef CONFIG_BLK_DEV_INITRD diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c index 8abb9e86d8a..84fd1c14c8a 100644 --- a/arch/ia64/mm/contig.c +++ b/arch/ia64/mm/contig.c @@ -97,7 +97,7 @@ find_max_pfn (unsigned long start, unsigned long end, void *arg) * Find a place to put the bootmap and return its starting address in * bootmap_start. This address must be page-aligned. */ -int +static int __init find_bootmap_location (unsigned long start, unsigned long end, void *arg) { unsigned long needed = *(unsigned long *)arg; @@ -141,7 +141,7 @@ find_bootmap_location (unsigned long start, unsigned long end, void *arg) * Walk the EFI memory map and find usable memory for the system, taking * into account reserved areas. */ -void +void __init find_memory (void) { unsigned long bootmap_size; @@ -228,7 +228,7 @@ count_dma_pages (u64 start, u64 end, void *arg) * Set up the page tables. */ -void +void __init paging_init (void) { unsigned long max_dma; diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c index 08d94e6bfa1..3748768c787 100644 --- a/arch/ia64/mm/init.c +++ b/arch/ia64/mm/init.c @@ -206,7 +206,7 @@ free_initmem (void) (__init_end - __init_begin) >> 10); } -void +void __init free_initrd_mem (unsigned long start, unsigned long end) { struct page *page; @@ -261,7 +261,7 @@ free_initrd_mem (unsigned long start, unsigned long end) /* * This installs a clean page in the kernel's page table. */ -struct page * +static struct page * __init put_kernel_page (struct page *page, unsigned long address, pgprot_t pgprot) { pgd_t *pgd; @@ -411,7 +411,7 @@ ia64_mmu_init (void *my_cpu_data) #ifdef CONFIG_VIRTUAL_MEM_MAP -int +int __init create_mem_map_page_table (u64 start, u64 end, void *arg) { unsigned long address, start_page, end_page; @@ -519,7 +519,7 @@ ia64_pfn_valid (unsigned long pfn) } EXPORT_SYMBOL(ia64_pfn_valid); -int +int __init find_largest_hole (u64 start, u64 end, void *arg) { u64 *max_gap = arg; @@ -535,7 +535,7 @@ find_largest_hole (u64 start, u64 end, void *arg) } #endif /* CONFIG_VIRTUAL_MEM_MAP */ -static int +static int __init count_reserved_pages (u64 start, u64 end, void *arg) { unsigned long num_reserved = 0; @@ -567,7 +567,7 @@ nolwsys_setup (char *s) __setup("nolwsys", nolwsys_setup); -void +void __init mem_init (void) { long reserved_pages, codesize, datasize, initsize; -- cgit v1.2.3-18-g5258 From 914a4ea44169c8420d2767862755f34f76772819 Mon Sep 17 00:00:00 2001 From: "Chen, Kenneth W" Date: Sun, 12 Mar 2006 09:08:26 -0800 Subject: [IA64] add init declaration - gate page functions Add init declaration to bunch of patch functions and gate page setup function. Signed-off-by: Ken Chen Signed-off-by: Tony Luck --- arch/ia64/kernel/patch.c | 8 ++++---- arch/ia64/mm/init.c | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/patch.c b/arch/ia64/kernel/patch.c index 6a4ac7d70b3..bc11bb096f5 100644 --- a/arch/ia64/kernel/patch.c +++ b/arch/ia64/kernel/patch.c @@ -115,7 +115,7 @@ ia64_patch_vtop (unsigned long start, unsigned long end) ia64_srlz_i(); } -void +void __init ia64_patch_mckinley_e9 (unsigned long start, unsigned long end) { static int first_time = 1; @@ -149,7 +149,7 @@ ia64_patch_mckinley_e9 (unsigned long start, unsigned long end) ia64_srlz_i(); } -static void +static void __init patch_fsyscall_table (unsigned long start, unsigned long end) { extern unsigned long fsyscall_table[NR_syscalls]; @@ -166,7 +166,7 @@ patch_fsyscall_table (unsigned long start, unsigned long end) ia64_srlz_i(); } -static void +static void __init patch_brl_fsys_bubble_down (unsigned long start, unsigned long end) { extern char fsys_bubble_down[]; @@ -184,7 +184,7 @@ patch_brl_fsys_bubble_down (unsigned long start, unsigned long end) ia64_srlz_i(); } -void +void __init ia64_patch_gate (void) { # define START(name) ((unsigned long) __start_gate_##name##_patchlist) diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c index 3748768c787..e3a10002d64 100644 --- a/arch/ia64/mm/init.c +++ b/arch/ia64/mm/init.c @@ -294,7 +294,7 @@ put_kernel_page (struct page *page, unsigned long address, pgprot_t pgprot) return page; } -static void +static void __init setup_gate (void) { struct page *page; -- cgit v1.2.3-18-g5258 From 03906ea0345d3ae6e906495f86846afa4b8b69b6 Mon Sep 17 00:00:00 2001 From: "Chen, Kenneth W" Date: Sun, 12 Mar 2006 09:10:59 -0800 Subject: [IA64] add init declaration - nolwsys Add __initdata to nolwsys. Signed-off-by: Ken Chen Signed-off-by: Tony Luck --- arch/ia64/mm/init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c index e3a10002d64..ff4f31fcd33 100644 --- a/arch/ia64/mm/init.c +++ b/arch/ia64/mm/init.c @@ -556,7 +556,7 @@ count_reserved_pages (u64 start, u64 end, void *arg) * purposes. */ -static int nolwsys; +static int nolwsys __initdata; static int __init nolwsys_setup (char *s) -- cgit v1.2.3-18-g5258 From 39e18de810049e836390830174a248ad241b156a Mon Sep 17 00:00:00 2001 From: "Chen, Kenneth W" Date: Sun, 12 Mar 2006 09:20:27 -0800 Subject: [IA64] move patchlist and machvec into init section ia64_mv is initialized based on platform detected or specified. However, there is one instantiation of each platform type. We don't expect to switch platform vector during run time. Move those platform specific type into init section since a copy is made into global ia64_mv at initialization. Also move instruction patch list into init section as well. Signed-off-by: Ken Chen Signed-off-by: Tony Luck --- arch/ia64/kernel/vmlinux.lds.S | 51 +++++++++++++++++++++--------------------- 1 file changed, 26 insertions(+), 25 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S index 73af6267d2e..632d65cc068 100644 --- a/arch/ia64/kernel/vmlinux.lds.S +++ b/arch/ia64/kernel/vmlinux.lds.S @@ -70,34 +70,9 @@ SECTIONS __stop___ex_table = .; } - .data.patch.vtop : AT(ADDR(.data.patch.vtop) - LOAD_OFFSET) - { - __start___vtop_patchlist = .; - *(.data.patch.vtop) - __end___vtop_patchlist = .; - } - - .data.patch.mckinley_e9 : AT(ADDR(.data.patch.mckinley_e9) - LOAD_OFFSET) - { - __start___mckinley_e9_bundles = .; - *(.data.patch.mckinley_e9) - __end___mckinley_e9_bundles = .; - } - /* Global data */ _data = .; -#if defined(CONFIG_IA64_GENERIC) - /* Machine Vector */ - . = ALIGN(16); - .machvec : AT(ADDR(.machvec) - LOAD_OFFSET) - { - machvec_start = .; - *(.machvec) - machvec_end = .; - } -#endif - /* Unwind info & table: */ . = ALIGN(8); .IA_64.unwind_info : AT(ADDR(.IA_64.unwind_info) - LOAD_OFFSET) @@ -154,6 +129,32 @@ SECTIONS *(.initcall7.init) __initcall_end = .; } + + .data.patch.vtop : AT(ADDR(.data.patch.vtop) - LOAD_OFFSET) + { + __start___vtop_patchlist = .; + *(.data.patch.vtop) + __end___vtop_patchlist = .; + } + + .data.patch.mckinley_e9 : AT(ADDR(.data.patch.mckinley_e9) - LOAD_OFFSET) + { + __start___mckinley_e9_bundles = .; + *(.data.patch.mckinley_e9) + __end___mckinley_e9_bundles = .; + } + +#if defined(CONFIG_IA64_GENERIC) + /* Machine Vector */ + . = ALIGN(16); + .machvec : AT(ADDR(.machvec) - LOAD_OFFSET) + { + machvec_start = .; + *(.machvec) + machvec_end = .; + } +#endif + __con_initcall_start = .; .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) { *(.con_initcall.init) } -- cgit v1.2.3-18-g5258 From 2d0eee14b23f20c501a6c2536edf68f93c56edcd Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 21 Mar 2006 23:00:05 -0800 Subject: [PATCH] powerpc: Fix warning in add_memory arch/powerpc/mm/mem.c: In function `add_memory': arch/powerpc/mm/mem.c:128: warning: assignment makes integer from pointer without a cast Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Paul Mackerras --- arch/powerpc/mm/mem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 6809cdba6e9..80550b28450 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -125,7 +125,7 @@ int __devinit add_memory(u64 start, u64 size) nid = hot_add_scn_to_nid(start); pgdata = NODE_DATA(nid); - start = __va(start); + start = (unsigned long)__va(start); create_section_mapping(start, start + size); /* this should work for most non-highmem platforms */ -- cgit v1.2.3-18-g5258 From 6ea671a12f66b9d4d0f35fce957a71a6849295f2 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 21 Mar 2006 23:20:27 -0800 Subject: [PATCH] powerpc: tidy-up of_register_driver()/driver_register() return values Remove the assumption that driver_register() returns the number of devices bound to the driver. In fact, it returns zero for success or a negative error value. Nobody uses the return value of of_register_driver() anyway. Signed-off-by: Bjorn Helgaas Acked-by: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/of_device.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/of_device.c b/arch/powerpc/kernel/of_device.c index 22d83d4d1af..9feeeef5a87 100644 --- a/arch/powerpc/kernel/of_device.c +++ b/arch/powerpc/kernel/of_device.c @@ -147,15 +147,12 @@ postcore_initcall(of_bus_driver_init); int of_register_driver(struct of_platform_driver *drv) { - int count = 0; - /* initialize common driver fields */ drv->driver.name = drv->name; drv->driver.bus = &of_platform_bus_type; /* register with core */ - count = driver_register(&drv->driver); - return count ? count : 1; + return driver_register(&drv->driver); } void of_unregister_driver(struct of_platform_driver *drv) -- cgit v1.2.3-18-g5258 From 7d420896256a4bffe44202f282fbdd4c74d779a8 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Thu, 23 Mar 2006 12:59:08 +0000 Subject: [ARM] 3391/1: use PLAT8250_DEV_PLATFORM{,1} for platform device id instead of 0/1 Patch from Lennert Buytenhek This patch changes iop3xx and omap2 and to use PLAT8250_DEV_PLATFORM{,1} as platform device id instead of just hardcoding 0/1 directly. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- arch/arm/mach-iop3xx/iop331-setup.c | 4 ++-- arch/arm/mach-omap2/serial.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-iop3xx/iop331-setup.c b/arch/arm/mach-iop3xx/iop331-setup.c index 2d6abe5be14..7b7b6eea384 100644 --- a/arch/arm/mach-iop3xx/iop331-setup.c +++ b/arch/arm/mach-iop3xx/iop331-setup.c @@ -103,7 +103,7 @@ static struct plat_serial8250_port iop33x_uart1_data[] = { static struct platform_device iop33x_uart0 = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev.platform_data = iop33x_uart0_data, .num_resources = 2, .resource = iop33x_uart0_resources, @@ -111,7 +111,7 @@ static struct platform_device iop33x_uart0 = { static struct platform_device iop33x_uart1 = { .name = "serial8250", - .id = 1, + .id = PLAT8250_DEV_PLATFORM1, .dev.platform_data = iop33x_uart1_data, .num_resources = 2, .resource = iop33x_uart1_resources, diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 24dd374224a..0884bc7c23b 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -167,7 +167,7 @@ void __init omap_serial_init() static struct platform_device serial_device = { .name = "serial8250", - .id = 0, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = serial_platform_data, }, -- cgit v1.2.3-18-g5258 From fcab1e51796d8bcd1a7969ff52bd904d38748e00 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Thu, 23 Mar 2006 07:48:16 +0100 Subject: [PATCH] sparc64: fix set_page_count merge clash Merge clash will have broken sparc64. Synch up its online_page implementation with powerpc, which was identical until the set_page_count removal. Signed-off-by: Nick Piggin Signed-off-by: Linus Torvalds --- arch/sparc64/mm/init.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index ded63ee9c4f..1539a8362b6 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -1828,8 +1828,8 @@ void __flush_tlb_all(void) void online_page(struct page *page) { ClearPageReserved(page); - set_page_count(page, 0); - free_cold_page(page); + init_page_count(page); + __free_page(page); totalram_pages++; num_physpages++; } -- cgit v1.2.3-18-g5258 From 69ef4141e03fab1c6956d3c760584c72b548a26f Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Thu, 23 Mar 2006 02:59:28 -0800 Subject: [PATCH] i386: let REGPARM no longer depend on EXPERIMENTAL REGPARM has already gotten much testing, what about removing the dependency on EXPERIMENTAL? Additionally, this patch does: - remove the useless "default n" - remove note regarding binary only modules (nowadays, there are even some binary only modules compiled with REGPARM=y available) Signed-off-by: Adrian Bunk Cc: Sam Ravnborg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/Kconfig | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index 5b1a7d46d1d..69c8a70e854 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -660,13 +660,10 @@ config BOOT_IOREMAP default y config REGPARM - bool "Use register arguments (EXPERIMENTAL)" - depends on EXPERIMENTAL - default n + bool "Use register arguments" help Compile the kernel with -mregparm=3. This uses a different ABI and passes the first three arguments of a function call in registers. - This will probably break binary only modules. config SECCOMP bool "Enable seccomp to safely compute untrusted bytecode" -- cgit v1.2.3-18-g5258 From b824eb605ccba995fd32c6590aed365f93d48002 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 23 Mar 2006 02:59:29 -0800 Subject: [PATCH] Make CONFIG_REGPARM enabled by default Make CONFIG_REGPARM enabled by default. It's a noticable win both for size and for performance, and gcc[34] handles it correctly. Signed-off-by: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/Kconfig | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index 69c8a70e854..5f89c74537e 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -661,9 +661,17 @@ config BOOT_IOREMAP config REGPARM bool "Use register arguments" + default y help - Compile the kernel with -mregparm=3. This uses a different ABI - and passes the first three arguments of a function call in registers. + Compile the kernel with -mregparm=3. This instructs gcc to use + a more efficient function call ABI which passes the first three + arguments of a function call via registers, which results in denser + and faster code. + + If this option is disabled, then the default ABI of passing + arguments via the stack is used. + + If unsure, say Y. config SECCOMP bool "Enable seccomp to safely compute untrusted bytecode" -- cgit v1.2.3-18-g5258 From 4d7d8c82c181711d28c8336108330a9121f5ef07 Mon Sep 17 00:00:00 2001 From: Chuck Ebbert <76306.1226@compuserve.com> Date: Thu, 23 Mar 2006 02:59:30 -0800 Subject: [PATCH] i386: multi-column stack backtraces Print stack backtraces in multiple columns, saving screen space. Number of columns is configurable and defaults to one so behavior is backwards-compatible. Also removes the brackets around addresses when printing more that one entry per line so they print as:
instead of: [
] This helps multiple entries fit better on one line. Original idea by Dave Jones, taken from x86_64. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Dave Jones Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/Kconfig.debug | 9 +++++++++ arch/i386/kernel/traps.c | 32 +++++++++++++++++++++++++++----- 2 files changed, 36 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/i386/Kconfig.debug b/arch/i386/Kconfig.debug index bf32ecc9ad0..00108ba9a78 100644 --- a/arch/i386/Kconfig.debug +++ b/arch/i386/Kconfig.debug @@ -31,6 +31,15 @@ config DEBUG_STACK_USAGE This option will slow down process creation somewhat. +config STACK_BACKTRACE_COLS + int "Stack backtraces per line" if DEBUG_KERNEL + range 1 3 + default 2 + help + Selects how many stack backtrace entries per line to display. + + This can save screen space when displaying traces. + comment "Page alloc debug is incompatible with Software Suspend on i386" depends on DEBUG_KERNEL && SOFTWARE_SUSPEND diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c index b814dbdcc91..ee61988f61b 100644 --- a/arch/i386/kernel/traps.c +++ b/arch/i386/kernel/traps.c @@ -112,12 +112,30 @@ static inline int valid_stack_ptr(struct thread_info *tinfo, void *p) p < (void *)tinfo + THREAD_SIZE - 3; } -static void print_addr_and_symbol(unsigned long addr, char *log_lvl) +/* + * Print CONFIG_STACK_BACKTRACE_COLS address/symbol entries per line. + */ +static inline int print_addr_and_symbol(unsigned long addr, char *log_lvl, + int printed) { - printk(log_lvl); + if (!printed) + printk(log_lvl); + +#if CONFIG_STACK_BACKTRACE_COLS == 1 printk(" [<%08lx>] ", addr); +#else + printk(" <%08lx> ", addr); +#endif print_symbol("%s", addr); - printk("\n"); + + printed = (printed + 1) % CONFIG_STACK_BACKTRACE_COLS; + + if (printed) + printk(" "); + else + printk("\n"); + + return printed; } static inline unsigned long print_context_stack(struct thread_info *tinfo, @@ -125,20 +143,24 @@ static inline unsigned long print_context_stack(struct thread_info *tinfo, char *log_lvl) { unsigned long addr; + int printed = 0; /* nr of entries already printed on current line */ #ifdef CONFIG_FRAME_POINTER while (valid_stack_ptr(tinfo, (void *)ebp)) { addr = *(unsigned long *)(ebp + 4); - print_addr_and_symbol(addr, log_lvl); + printed = print_addr_and_symbol(addr, log_lvl, printed); ebp = *(unsigned long *)ebp; } #else while (valid_stack_ptr(tinfo, stack)) { addr = *stack++; if (__kernel_text_address(addr)) - print_addr_and_symbol(addr, log_lvl); + printed = print_addr_and_symbol(addr, log_lvl, printed); } #endif + if (printed) + printk("\n"); + return ebp; } -- cgit v1.2.3-18-g5258 From 9a0b5817ad97bb718ab85322759d19a238712b47 Mon Sep 17 00:00:00 2001 From: Gerd Hoffmann Date: Thu, 23 Mar 2006 02:59:32 -0800 Subject: [PATCH] x86: SMP alternatives Implement SMP alternatives, i.e. switching at runtime between different code versions for UP and SMP. The code can patch both SMP->UP and UP->SMP. The UP->SMP case is useful for CPU hotplug. With CONFIG_CPU_HOTPLUG enabled the code switches to UP at boot time and when the number of CPUs goes down to 1, and switches to SMP when the number of CPUs goes up to 2. Without CONFIG_CPU_HOTPLUG or on non-SMP-capable systems the code is patched once at boot time (if needed) and the tables are released afterwards. The changes in detail: * The current alternatives bits are moved to a separate file, the SMP alternatives code is added there. * The patch adds some new elf sections to the kernel: .smp_altinstructions like .altinstructions, also contains a list of alt_instr structs. .smp_altinstr_replacement like .altinstr_replacement, but also has some space to save original instruction before replaving it. .smp_locks list of pointers to lock prefixes which can be nop'ed out on UP. The first two are used to replace more complex instruction sequences such as spinlocks and semaphores. It would be possible to deal with the lock prefixes with that as well, but by handling them as special case the table sizes become much smaller. * The sections are page-aligned and padded up to page size, so they can be free if they are not needed. * Splitted the code to release init pages to a separate function and use it to release the elf sections if they are unused. Signed-off-by: Gerd Hoffmann Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/Makefile | 2 +- arch/i386/kernel/alternative.c | 321 +++++++++++++++++++++++++++++++++++++++++ arch/i386/kernel/cpu/proc.c | 2 +- arch/i386/kernel/module.c | 32 ++-- arch/i386/kernel/semaphore.c | 8 +- arch/i386/kernel/setup.c | 95 ------------ arch/i386/kernel/smpboot.c | 3 + arch/i386/kernel/vmlinux.lds.S | 20 +++ arch/i386/mm/init.c | 45 +++--- arch/um/kernel/um_arch.c | 12 +- 10 files changed, 405 insertions(+), 135 deletions(-) create mode 100644 arch/i386/kernel/alternative.c (limited to 'arch') diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile index 65656c033d7..5b9ed21216c 100644 --- a/arch/i386/kernel/Makefile +++ b/arch/i386/kernel/Makefile @@ -7,7 +7,7 @@ extra-y := head.o init_task.o vmlinux.lds obj-y := process.o semaphore.o signal.o entry.o traps.o irq.o \ ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_i386.o \ pci-dma.o i386_ksyms.o i387.o dmi_scan.o bootflag.o \ - quirks.o i8237.o topology.o + quirks.o i8237.o topology.o alternative.o obj-y += cpu/ obj-y += timers/ diff --git a/arch/i386/kernel/alternative.c b/arch/i386/kernel/alternative.c new file mode 100644 index 00000000000..5cbd6f99fb2 --- /dev/null +++ b/arch/i386/kernel/alternative.c @@ -0,0 +1,321 @@ +#include +#include +#include +#include +#include + +#define DEBUG 0 +#if DEBUG +# define DPRINTK(fmt, args...) printk(fmt, args) +#else +# define DPRINTK(fmt, args...) +#endif + +/* Use inline assembly to define this because the nops are defined + as inline assembly strings in the include files and we cannot + get them easily into strings. */ +asm("\t.data\nintelnops: " + GENERIC_NOP1 GENERIC_NOP2 GENERIC_NOP3 GENERIC_NOP4 GENERIC_NOP5 GENERIC_NOP6 + GENERIC_NOP7 GENERIC_NOP8); +asm("\t.data\nk8nops: " + K8_NOP1 K8_NOP2 K8_NOP3 K8_NOP4 K8_NOP5 K8_NOP6 + K8_NOP7 K8_NOP8); +asm("\t.data\nk7nops: " + K7_NOP1 K7_NOP2 K7_NOP3 K7_NOP4 K7_NOP5 K7_NOP6 + K7_NOP7 K7_NOP8); + +extern unsigned char intelnops[], k8nops[], k7nops[]; +static unsigned char *intel_nops[ASM_NOP_MAX+1] = { + NULL, + intelnops, + intelnops + 1, + intelnops + 1 + 2, + intelnops + 1 + 2 + 3, + intelnops + 1 + 2 + 3 + 4, + intelnops + 1 + 2 + 3 + 4 + 5, + intelnops + 1 + 2 + 3 + 4 + 5 + 6, + intelnops + 1 + 2 + 3 + 4 + 5 + 6 + 7, +}; +static unsigned char *k8_nops[ASM_NOP_MAX+1] = { + NULL, + k8nops, + k8nops + 1, + k8nops + 1 + 2, + k8nops + 1 + 2 + 3, + k8nops + 1 + 2 + 3 + 4, + k8nops + 1 + 2 + 3 + 4 + 5, + k8nops + 1 + 2 + 3 + 4 + 5 + 6, + k8nops + 1 + 2 + 3 + 4 + 5 + 6 + 7, +}; +static unsigned char *k7_nops[ASM_NOP_MAX+1] = { + NULL, + k7nops, + k7nops + 1, + k7nops + 1 + 2, + k7nops + 1 + 2 + 3, + k7nops + 1 + 2 + 3 + 4, + k7nops + 1 + 2 + 3 + 4 + 5, + k7nops + 1 + 2 + 3 + 4 + 5 + 6, + k7nops + 1 + 2 + 3 + 4 + 5 + 6 + 7, +}; +static struct nop { + int cpuid; + unsigned char **noptable; +} noptypes[] = { + { X86_FEATURE_K8, k8_nops }, + { X86_FEATURE_K7, k7_nops }, + { -1, NULL } +}; + + +extern struct alt_instr __alt_instructions[], __alt_instructions_end[]; +extern struct alt_instr __smp_alt_instructions[], __smp_alt_instructions_end[]; +extern u8 *__smp_locks[], *__smp_locks_end[]; + +extern u8 __smp_alt_begin[], __smp_alt_end[]; + + +static unsigned char** find_nop_table(void) +{ + unsigned char **noptable = intel_nops; + int i; + + for (i = 0; noptypes[i].cpuid >= 0; i++) { + if (boot_cpu_has(noptypes[i].cpuid)) { + noptable = noptypes[i].noptable; + break; + } + } + return noptable; +} + +/* Replace instructions with better alternatives for this CPU type. + This runs before SMP is initialized to avoid SMP problems with + self modifying code. This implies that assymetric systems where + APs have less capabilities than the boot processor are not handled. + Tough. Make sure you disable such features by hand. */ + +void apply_alternatives(struct alt_instr *start, struct alt_instr *end) +{ + unsigned char **noptable = find_nop_table(); + struct alt_instr *a; + int diff, i, k; + + DPRINTK("%s: alt table %p -> %p\n", __FUNCTION__, start, end); + for (a = start; a < end; a++) { + BUG_ON(a->replacementlen > a->instrlen); + if (!boot_cpu_has(a->cpuid)) + continue; + memcpy(a->instr, a->replacement, a->replacementlen); + diff = a->instrlen - a->replacementlen; + /* Pad the rest with nops */ + for (i = a->replacementlen; diff > 0; diff -= k, i += k) { + k = diff; + if (k > ASM_NOP_MAX) + k = ASM_NOP_MAX; + memcpy(a->instr + i, noptable[k], k); + } + } +} + +static void alternatives_smp_save(struct alt_instr *start, struct alt_instr *end) +{ + struct alt_instr *a; + + DPRINTK("%s: alt table %p-%p\n", __FUNCTION__, start, end); + for (a = start; a < end; a++) { + memcpy(a->replacement + a->replacementlen, + a->instr, + a->instrlen); + } +} + +static void alternatives_smp_apply(struct alt_instr *start, struct alt_instr *end) +{ + struct alt_instr *a; + + for (a = start; a < end; a++) { + memcpy(a->instr, + a->replacement + a->replacementlen, + a->instrlen); + } +} + +static void alternatives_smp_lock(u8 **start, u8 **end, u8 *text, u8 *text_end) +{ + u8 **ptr; + + for (ptr = start; ptr < end; ptr++) { + if (*ptr < text) + continue; + if (*ptr > text_end) + continue; + **ptr = 0xf0; /* lock prefix */ + }; +} + +static void alternatives_smp_unlock(u8 **start, u8 **end, u8 *text, u8 *text_end) +{ + unsigned char **noptable = find_nop_table(); + u8 **ptr; + + for (ptr = start; ptr < end; ptr++) { + if (*ptr < text) + continue; + if (*ptr > text_end) + continue; + **ptr = noptable[1][0]; + }; +} + +struct smp_alt_module { + /* what is this ??? */ + struct module *mod; + char *name; + + /* ptrs to lock prefixes */ + u8 **locks; + u8 **locks_end; + + /* .text segment, needed to avoid patching init code ;) */ + u8 *text; + u8 *text_end; + + struct list_head next; +}; +static LIST_HEAD(smp_alt_modules); +static DEFINE_SPINLOCK(smp_alt); + +static int smp_alt_once = 0; +static int __init bootonly(char *str) +{ + smp_alt_once = 1; + return 1; +} +__setup("smp-alt-boot", bootonly); + +void alternatives_smp_module_add(struct module *mod, char *name, + void *locks, void *locks_end, + void *text, void *text_end) +{ + struct smp_alt_module *smp; + unsigned long flags; + + if (smp_alt_once) { + if (boot_cpu_has(X86_FEATURE_UP)) + alternatives_smp_unlock(locks, locks_end, + text, text_end); + return; + } + + smp = kzalloc(sizeof(*smp), GFP_KERNEL); + if (NULL == smp) + return; /* we'll run the (safe but slow) SMP code then ... */ + + smp->mod = mod; + smp->name = name; + smp->locks = locks; + smp->locks_end = locks_end; + smp->text = text; + smp->text_end = text_end; + DPRINTK("%s: locks %p -> %p, text %p -> %p, name %s\n", + __FUNCTION__, smp->locks, smp->locks_end, + smp->text, smp->text_end, smp->name); + + spin_lock_irqsave(&smp_alt, flags); + list_add_tail(&smp->next, &smp_alt_modules); + if (boot_cpu_has(X86_FEATURE_UP)) + alternatives_smp_unlock(smp->locks, smp->locks_end, + smp->text, smp->text_end); + spin_unlock_irqrestore(&smp_alt, flags); +} + +void alternatives_smp_module_del(struct module *mod) +{ + struct smp_alt_module *item; + unsigned long flags; + + if (smp_alt_once) + return; + + spin_lock_irqsave(&smp_alt, flags); + list_for_each_entry(item, &smp_alt_modules, next) { + if (mod != item->mod) + continue; + list_del(&item->next); + spin_unlock_irqrestore(&smp_alt, flags); + DPRINTK("%s: %s\n", __FUNCTION__, item->name); + kfree(item); + return; + } + spin_unlock_irqrestore(&smp_alt, flags); +} + +void alternatives_smp_switch(int smp) +{ + struct smp_alt_module *mod; + unsigned long flags; + + if (smp_alt_once) + return; + BUG_ON(!smp && (num_online_cpus() > 1)); + + spin_lock_irqsave(&smp_alt, flags); + if (smp) { + printk(KERN_INFO "SMP alternatives: switching to SMP code\n"); + clear_bit(X86_FEATURE_UP, boot_cpu_data.x86_capability); + clear_bit(X86_FEATURE_UP, cpu_data[0].x86_capability); + alternatives_smp_apply(__smp_alt_instructions, + __smp_alt_instructions_end); + list_for_each_entry(mod, &smp_alt_modules, next) + alternatives_smp_lock(mod->locks, mod->locks_end, + mod->text, mod->text_end); + } else { + printk(KERN_INFO "SMP alternatives: switching to UP code\n"); + set_bit(X86_FEATURE_UP, boot_cpu_data.x86_capability); + set_bit(X86_FEATURE_UP, cpu_data[0].x86_capability); + apply_alternatives(__smp_alt_instructions, + __smp_alt_instructions_end); + list_for_each_entry(mod, &smp_alt_modules, next) + alternatives_smp_unlock(mod->locks, mod->locks_end, + mod->text, mod->text_end); + } + spin_unlock_irqrestore(&smp_alt, flags); +} + +void __init alternative_instructions(void) +{ + apply_alternatives(__alt_instructions, __alt_instructions_end); + + /* switch to patch-once-at-boottime-only mode and free the + * tables in case we know the number of CPUs will never ever + * change */ +#ifdef CONFIG_HOTPLUG_CPU + if (num_possible_cpus() < 2) + smp_alt_once = 1; +#else + smp_alt_once = 1; +#endif + + if (smp_alt_once) { + if (1 == num_possible_cpus()) { + printk(KERN_INFO "SMP alternatives: switching to UP code\n"); + set_bit(X86_FEATURE_UP, boot_cpu_data.x86_capability); + set_bit(X86_FEATURE_UP, cpu_data[0].x86_capability); + apply_alternatives(__smp_alt_instructions, + __smp_alt_instructions_end); + alternatives_smp_unlock(__smp_locks, __smp_locks_end, + _text, _etext); + } + free_init_pages("SMP alternatives", + (unsigned long)__smp_alt_begin, + (unsigned long)__smp_alt_end); + } else { + alternatives_smp_save(__smp_alt_instructions, + __smp_alt_instructions_end); + alternatives_smp_module_add(NULL, "core kernel", + __smp_locks, __smp_locks_end, + _text, _etext); + alternatives_smp_switch(0); + } +} diff --git a/arch/i386/kernel/cpu/proc.c b/arch/i386/kernel/cpu/proc.c index 89a85af33d2..5cfbd801169 100644 --- a/arch/i386/kernel/cpu/proc.c +++ b/arch/i386/kernel/cpu/proc.c @@ -40,7 +40,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) /* Other (Linux-defined) */ "cxmmx", "k6_mtrr", "cyrix_arr", "centaur_mcr", NULL, NULL, NULL, NULL, - "constant_tsc", NULL, NULL, NULL, NULL, NULL, NULL, NULL, + "constant_tsc", "up", NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, diff --git a/arch/i386/kernel/module.c b/arch/i386/kernel/module.c index 5149c8a621f..470cf97e7cd 100644 --- a/arch/i386/kernel/module.c +++ b/arch/i386/kernel/module.c @@ -104,26 +104,38 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, return -ENOEXEC; } -extern void apply_alternatives(void *start, void *end); - int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, struct module *me) { - const Elf_Shdr *s; + const Elf_Shdr *s, *text = NULL, *alt = NULL, *locks = NULL; char *secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; - /* look for .altinstructions to patch */ for (s = sechdrs; s < sechdrs + hdr->e_shnum; s++) { - void *seg; - if (strcmp(".altinstructions", secstrings + s->sh_name)) - continue; - seg = (void *)s->sh_addr; - apply_alternatives(seg, seg + s->sh_size); - } + if (!strcmp(".text", secstrings + s->sh_name)) + text = s; + if (!strcmp(".altinstructions", secstrings + s->sh_name)) + alt = s; + if (!strcmp(".smp_locks", secstrings + s->sh_name)) + locks= s; + } + + if (alt) { + /* patch .altinstructions */ + void *aseg = (void *)alt->sh_addr; + apply_alternatives(aseg, aseg + alt->sh_size); + } + if (locks && text) { + void *lseg = (void *)locks->sh_addr; + void *tseg = (void *)text->sh_addr; + alternatives_smp_module_add(me, me->name, + lseg, lseg + locks->sh_size, + tseg, tseg + text->sh_size); + } return 0; } void module_arch_cleanup(struct module *mod) { + alternatives_smp_module_del(mod); } diff --git a/arch/i386/kernel/semaphore.c b/arch/i386/kernel/semaphore.c index 7455ab64394..967dc74df9e 100644 --- a/arch/i386/kernel/semaphore.c +++ b/arch/i386/kernel/semaphore.c @@ -110,11 +110,11 @@ asm( ".align 4\n" ".globl __write_lock_failed\n" "__write_lock_failed:\n\t" - LOCK "addl $" RW_LOCK_BIAS_STR ",(%eax)\n" + LOCK_PREFIX "addl $" RW_LOCK_BIAS_STR ",(%eax)\n" "1: rep; nop\n\t" "cmpl $" RW_LOCK_BIAS_STR ",(%eax)\n\t" "jne 1b\n\t" - LOCK "subl $" RW_LOCK_BIAS_STR ",(%eax)\n\t" + LOCK_PREFIX "subl $" RW_LOCK_BIAS_STR ",(%eax)\n\t" "jnz __write_lock_failed\n\t" "ret" ); @@ -124,11 +124,11 @@ asm( ".align 4\n" ".globl __read_lock_failed\n" "__read_lock_failed:\n\t" - LOCK "incl (%eax)\n" + LOCK_PREFIX "incl (%eax)\n" "1: rep; nop\n\t" "cmpl $1,(%eax)\n\t" "js 1b\n\t" - LOCK "decl (%eax)\n\t" + LOCK_PREFIX "decl (%eax)\n\t" "js __read_lock_failed\n\t" "ret" ); diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c index ab62a9f4701..5f58f8cb983 100644 --- a/arch/i386/kernel/setup.c +++ b/arch/i386/kernel/setup.c @@ -1377,101 +1377,6 @@ static void __init register_memory(void) pci_mem_start, gapstart, gapsize); } -/* Use inline assembly to define this because the nops are defined - as inline assembly strings in the include files and we cannot - get them easily into strings. */ -asm("\t.data\nintelnops: " - GENERIC_NOP1 GENERIC_NOP2 GENERIC_NOP3 GENERIC_NOP4 GENERIC_NOP5 GENERIC_NOP6 - GENERIC_NOP7 GENERIC_NOP8); -asm("\t.data\nk8nops: " - K8_NOP1 K8_NOP2 K8_NOP3 K8_NOP4 K8_NOP5 K8_NOP6 - K8_NOP7 K8_NOP8); -asm("\t.data\nk7nops: " - K7_NOP1 K7_NOP2 K7_NOP3 K7_NOP4 K7_NOP5 K7_NOP6 - K7_NOP7 K7_NOP8); - -extern unsigned char intelnops[], k8nops[], k7nops[]; -static unsigned char *intel_nops[ASM_NOP_MAX+1] = { - NULL, - intelnops, - intelnops + 1, - intelnops + 1 + 2, - intelnops + 1 + 2 + 3, - intelnops + 1 + 2 + 3 + 4, - intelnops + 1 + 2 + 3 + 4 + 5, - intelnops + 1 + 2 + 3 + 4 + 5 + 6, - intelnops + 1 + 2 + 3 + 4 + 5 + 6 + 7, -}; -static unsigned char *k8_nops[ASM_NOP_MAX+1] = { - NULL, - k8nops, - k8nops + 1, - k8nops + 1 + 2, - k8nops + 1 + 2 + 3, - k8nops + 1 + 2 + 3 + 4, - k8nops + 1 + 2 + 3 + 4 + 5, - k8nops + 1 + 2 + 3 + 4 + 5 + 6, - k8nops + 1 + 2 + 3 + 4 + 5 + 6 + 7, -}; -static unsigned char *k7_nops[ASM_NOP_MAX+1] = { - NULL, - k7nops, - k7nops + 1, - k7nops + 1 + 2, - k7nops + 1 + 2 + 3, - k7nops + 1 + 2 + 3 + 4, - k7nops + 1 + 2 + 3 + 4 + 5, - k7nops + 1 + 2 + 3 + 4 + 5 + 6, - k7nops + 1 + 2 + 3 + 4 + 5 + 6 + 7, -}; -static struct nop { - int cpuid; - unsigned char **noptable; -} noptypes[] = { - { X86_FEATURE_K8, k8_nops }, - { X86_FEATURE_K7, k7_nops }, - { -1, NULL } -}; - -/* Replace instructions with better alternatives for this CPU type. - - This runs before SMP is initialized to avoid SMP problems with - self modifying code. This implies that assymetric systems where - APs have less capabilities than the boot processor are not handled. - Tough. Make sure you disable such features by hand. */ -void apply_alternatives(void *start, void *end) -{ - struct alt_instr *a; - int diff, i, k; - unsigned char **noptable = intel_nops; - for (i = 0; noptypes[i].cpuid >= 0; i++) { - if (boot_cpu_has(noptypes[i].cpuid)) { - noptable = noptypes[i].noptable; - break; - } - } - for (a = start; (void *)a < end; a++) { - if (!boot_cpu_has(a->cpuid)) - continue; - BUG_ON(a->replacementlen > a->instrlen); - memcpy(a->instr, a->replacement, a->replacementlen); - diff = a->instrlen - a->replacementlen; - /* Pad the rest with nops */ - for (i = a->replacementlen; diff > 0; diff -= k, i += k) { - k = diff; - if (k > ASM_NOP_MAX) - k = ASM_NOP_MAX; - memcpy(a->instr + i, noptable[k], k); - } - } -} - -void __init alternative_instructions(void) -{ - extern struct alt_instr __alt_instructions[], __alt_instructions_end[]; - apply_alternatives(__alt_instructions, __alt_instructions_end); -} - static char * __init machine_specific_memory_setup(void); #ifdef CONFIG_MCA diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index 7007e178379..4c470e99a74 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -899,6 +899,7 @@ static int __devinit do_boot_cpu(int apicid, int cpu) unsigned short nmi_high = 0, nmi_low = 0; ++cpucount; + alternatives_smp_switch(1); /* * We can't use kernel_thread since we must avoid to @@ -1368,6 +1369,8 @@ void __cpu_die(unsigned int cpu) /* They ack this in play_dead by setting CPU_DEAD */ if (per_cpu(cpu_state, cpu) == CPU_DEAD) { printk ("CPU %d is now offline\n", cpu); + if (1 == num_online_cpus()) + alternatives_smp_switch(0); return; } msleep(100); diff --git a/arch/i386/kernel/vmlinux.lds.S b/arch/i386/kernel/vmlinux.lds.S index 4710195b6b7..3f21c6f6466 100644 --- a/arch/i386/kernel/vmlinux.lds.S +++ b/arch/i386/kernel/vmlinux.lds.S @@ -68,6 +68,26 @@ SECTIONS *(.data.init_task) } + /* might get freed after init */ + . = ALIGN(4096); + __smp_alt_begin = .; + __smp_alt_instructions = .; + .smp_altinstructions : AT(ADDR(.smp_altinstructions) - LOAD_OFFSET) { + *(.smp_altinstructions) + } + __smp_alt_instructions_end = .; + . = ALIGN(4); + __smp_locks = .; + .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) { + *(.smp_locks) + } + __smp_locks_end = .; + .smp_altinstr_replacement : AT(ADDR(.smp_altinstr_replacement) - LOAD_OFFSET) { + *(.smp_altinstr_replacement) + } + . = ALIGN(4096); + __smp_alt_end = .; + /* will be freed after init */ . = ALIGN(4096); /* Init code and data */ __init_begin = .; diff --git a/arch/i386/mm/init.c b/arch/i386/mm/init.c index 7ba55a6e2db..9f66ac582a8 100644 --- a/arch/i386/mm/init.c +++ b/arch/i386/mm/init.c @@ -720,21 +720,6 @@ static int noinline do_test_wp_bit(void) return flag; } -void free_initmem(void) -{ - unsigned long addr; - - addr = (unsigned long)(&__init_begin); - for (; addr < (unsigned long)(&__init_end); addr += PAGE_SIZE) { - ClearPageReserved(virt_to_page(addr)); - init_page_count(virt_to_page(addr)); - memset((void *)addr, 0xcc, PAGE_SIZE); - free_page(addr); - totalram_pages++; - } - printk (KERN_INFO "Freeing unused kernel memory: %dk freed\n", (__init_end - __init_begin) >> 10); -} - #ifdef CONFIG_DEBUG_RODATA extern char __start_rodata, __end_rodata; @@ -758,17 +743,31 @@ void mark_rodata_ro(void) } #endif +void free_init_pages(char *what, unsigned long begin, unsigned long end) +{ + unsigned long addr; + + for (addr = begin; addr < end; addr += PAGE_SIZE) { + ClearPageReserved(virt_to_page(addr)); + init_page_count(virt_to_page(addr)); + memset((void *)addr, 0xcc, PAGE_SIZE); + free_page(addr); + totalram_pages++; + } + printk(KERN_INFO "Freeing %s: %ldk freed\n", what, (end - begin) >> 10); +} + +void free_initmem(void) +{ + free_init_pages("unused kernel memory", + (unsigned long)(&__init_begin), + (unsigned long)(&__init_end)); +} #ifdef CONFIG_BLK_DEV_INITRD void free_initrd_mem(unsigned long start, unsigned long end) { - if (start < end) - printk (KERN_INFO "Freeing initrd memory: %ldk freed\n", (end - start) >> 10); - for (; start < end; start += PAGE_SIZE) { - ClearPageReserved(virt_to_page(start)); - init_page_count(virt_to_page(start)); - free_page(start); - totalram_pages++; - } + free_init_pages("initrd memory", start, end); } #endif + diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c index 27cdf916442..80c9c18aae9 100644 --- a/arch/um/kernel/um_arch.c +++ b/arch/um/kernel/um_arch.c @@ -491,6 +491,16 @@ void __init check_bugs(void) check_devanon(); } -void apply_alternatives(void *start, void *end) +void apply_alternatives(struct alt_instr *start, struct alt_instr *end) +{ +} + +void alternatives_smp_module_add(struct module *mod, char *name, + void *locks, void *locks_end, + void *text, void *text_end) +{ +} + +void alternatives_smp_module_del(struct module *mod) { } -- cgit v1.2.3-18-g5258 From 3bc9b76bede9b3c72088258c7e72eb823f3351d4 Mon Sep 17 00:00:00 2001 From: Chuck Ebbert <76306.1226@compuserve.com> Date: Thu, 23 Mar 2006 02:59:33 -0800 Subject: [PATCH] i386: __devinit should be __cpuinit Several places in arch/i386/kernel/cpu and kernel/cpu were using __devinit when they should have been __cpuinit. Fixing that saves ~4K when CONFIG_HOTPLUG && !CONFIG_HOTPLUG_CPU. Noticed by Andrew Morton. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/cpu/common.c | 32 ++++++++++++++++---------------- arch/i386/kernel/cpu/intel.c | 12 ++++++------ arch/i386/kernel/cpu/intel_cacheinfo.c | 2 +- 3 files changed, 23 insertions(+), 23 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c index e6bd095ae10..f63dcfb16da 100644 --- a/arch/i386/kernel/cpu/common.c +++ b/arch/i386/kernel/cpu/common.c @@ -25,9 +25,9 @@ EXPORT_PER_CPU_SYMBOL(cpu_gdt_descr); DEFINE_PER_CPU(unsigned char, cpu_16bit_stack[CPU_16BIT_STACK_SIZE]); EXPORT_PER_CPU_SYMBOL(cpu_16bit_stack); -static int cachesize_override __devinitdata = -1; -static int disable_x86_fxsr __devinitdata = 0; -static int disable_x86_serial_nr __devinitdata = 1; +static int cachesize_override __cpuinitdata = -1; +static int disable_x86_fxsr __cpuinitdata = 0; +static int disable_x86_serial_nr __cpuinitdata = 1; struct cpu_dev * cpu_devs[X86_VENDOR_NUM] = {}; @@ -59,7 +59,7 @@ static int __init cachesize_setup(char *str) } __setup("cachesize=", cachesize_setup); -int __devinit get_model_name(struct cpuinfo_x86 *c) +int __cpuinit get_model_name(struct cpuinfo_x86 *c) { unsigned int *v; char *p, *q; @@ -89,7 +89,7 @@ int __devinit get_model_name(struct cpuinfo_x86 *c) } -void __devinit display_cacheinfo(struct cpuinfo_x86 *c) +void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c) { unsigned int n, dummy, ecx, edx, l2size; @@ -130,7 +130,7 @@ void __devinit display_cacheinfo(struct cpuinfo_x86 *c) /* in particular, if CPUID levels 0x80000002..4 are supported, this isn't used */ /* Look up CPU names by table lookup. */ -static char __devinit *table_lookup_model(struct cpuinfo_x86 *c) +static char __cpuinit *table_lookup_model(struct cpuinfo_x86 *c) { struct cpu_model_info *info; @@ -151,7 +151,7 @@ static char __devinit *table_lookup_model(struct cpuinfo_x86 *c) } -static void __devinit get_cpu_vendor(struct cpuinfo_x86 *c, int early) +static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c, int early) { char *v = c->x86_vendor_id; int i; @@ -210,7 +210,7 @@ static inline int flag_is_changeable_p(u32 flag) /* Probe for the CPUID instruction */ -static int __devinit have_cpuid_p(void) +static int __cpuinit have_cpuid_p(void) { return flag_is_changeable_p(X86_EFLAGS_ID); } @@ -254,7 +254,7 @@ static void __init early_cpu_detect(void) } } -void __devinit generic_identify(struct cpuinfo_x86 * c) +void __cpuinit generic_identify(struct cpuinfo_x86 * c) { u32 tfms, xlvl; int junk; @@ -307,7 +307,7 @@ void __devinit generic_identify(struct cpuinfo_x86 * c) #endif } -static void __devinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c) +static void __cpuinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c) { if (cpu_has(c, X86_FEATURE_PN) && disable_x86_serial_nr ) { /* Disable processor serial number */ @@ -335,7 +335,7 @@ __setup("serialnumber", x86_serial_nr_setup); /* * This does the hard work of actually picking apart the CPU stuff... */ -void __devinit identify_cpu(struct cpuinfo_x86 *c) +void __cpuinit identify_cpu(struct cpuinfo_x86 *c) { int i; @@ -453,7 +453,7 @@ void __devinit identify_cpu(struct cpuinfo_x86 *c) } #ifdef CONFIG_X86_HT -void __devinit detect_ht(struct cpuinfo_x86 *c) +void __cpuinit detect_ht(struct cpuinfo_x86 *c) { u32 eax, ebx, ecx, edx; int index_msb, core_bits; @@ -500,7 +500,7 @@ void __devinit detect_ht(struct cpuinfo_x86 *c) } #endif -void __devinit print_cpu_info(struct cpuinfo_x86 *c) +void __cpuinit print_cpu_info(struct cpuinfo_x86 *c) { char *vendor = NULL; @@ -523,7 +523,7 @@ void __devinit print_cpu_info(struct cpuinfo_x86 *c) printk("\n"); } -cpumask_t cpu_initialized __devinitdata = CPU_MASK_NONE; +cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE; /* This is hacky. :) * We're emulating future behavior. @@ -570,7 +570,7 @@ void __init early_cpu_init(void) * and IDT. We reload them nevertheless, this function acts as a * 'CPU state barrier', nothing should get across. */ -void __devinit cpu_init(void) +void __cpuinit cpu_init(void) { int cpu = smp_processor_id(); struct tss_struct * t = &per_cpu(init_tss, cpu); @@ -670,7 +670,7 @@ void __devinit cpu_init(void) } #ifdef CONFIG_HOTPLUG_CPU -void __devinit cpu_uninit(void) +void __cpuinit cpu_uninit(void) { int cpu = raw_smp_processor_id(); cpu_clear(cpu, cpu_initialized); diff --git a/arch/i386/kernel/cpu/intel.c b/arch/i386/kernel/cpu/intel.c index 8c0120186b9..5386b29bb5a 100644 --- a/arch/i386/kernel/cpu/intel.c +++ b/arch/i386/kernel/cpu/intel.c @@ -29,7 +29,7 @@ extern int trap_init_f00f_bug(void); struct movsl_mask movsl_mask __read_mostly; #endif -void __devinit early_intel_workaround(struct cpuinfo_x86 *c) +void __cpuinit early_intel_workaround(struct cpuinfo_x86 *c) { if (c->x86_vendor != X86_VENDOR_INTEL) return; @@ -44,7 +44,7 @@ void __devinit early_intel_workaround(struct cpuinfo_x86 *c) * This is called before we do cpu ident work */ -int __devinit ppro_with_ram_bug(void) +int __cpuinit ppro_with_ram_bug(void) { /* Uses data from early_cpu_detect now */ if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && @@ -62,7 +62,7 @@ int __devinit ppro_with_ram_bug(void) * P4 Xeon errata 037 workaround. * Hardware prefetcher may cause stale data to be loaded into the cache. */ -static void __devinit Intel_errata_workarounds(struct cpuinfo_x86 *c) +static void __cpuinit Intel_errata_workarounds(struct cpuinfo_x86 *c) { unsigned long lo, hi; @@ -81,7 +81,7 @@ static void __devinit Intel_errata_workarounds(struct cpuinfo_x86 *c) /* * find out the number of processor cores on the die */ -static int __devinit num_cpu_cores(struct cpuinfo_x86 *c) +static int __cpuinit num_cpu_cores(struct cpuinfo_x86 *c) { unsigned int eax, ebx, ecx, edx; @@ -96,7 +96,7 @@ static int __devinit num_cpu_cores(struct cpuinfo_x86 *c) return 1; } -static void __devinit init_intel(struct cpuinfo_x86 *c) +static void __cpuinit init_intel(struct cpuinfo_x86 *c) { unsigned int l2 = 0; char *p = NULL; @@ -205,7 +205,7 @@ static unsigned int intel_size_cache(struct cpuinfo_x86 * c, unsigned int size) return size; } -static struct cpu_dev intel_cpu_dev __devinitdata = { +static struct cpu_dev intel_cpu_dev __cpuinitdata = { .c_vendor = "Intel", .c_ident = { "GenuineIntel" }, .c_models = { diff --git a/arch/i386/kernel/cpu/intel_cacheinfo.c b/arch/i386/kernel/cpu/intel_cacheinfo.c index ffe58cee0c4..36c9b370663 100644 --- a/arch/i386/kernel/cpu/intel_cacheinfo.c +++ b/arch/i386/kernel/cpu/intel_cacheinfo.c @@ -330,7 +330,7 @@ static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index) } } } -static void __devinit cache_remove_shared_cpu_map(unsigned int cpu, int index) +static void __cpuinit cache_remove_shared_cpu_map(unsigned int cpu, int index) { struct _cpuid4_info *this_leaf, *sibling_leaf; int sibling; -- cgit v1.2.3-18-g5258 From 4f88651125e2ca8b106b6f65b65ea45776517bf3 Mon Sep 17 00:00:00 2001 From: Chuck Ebbert <76306.1226@compuserve.com> Date: Thu, 23 Mar 2006 02:59:34 -0800 Subject: [PATCH] i386: allow disabling X86_FEATURE_SEP at boot Allow the x86 "sep" feature to be disabled at bootup. This forces use of the int80 vsyscall. Mainly for testing or benchmarking the int80 vsyscall code. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/cpu/common.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c index f63dcfb16da..bbfc278dfa4 100644 --- a/arch/i386/kernel/cpu/common.c +++ b/arch/i386/kernel/cpu/common.c @@ -26,8 +26,9 @@ DEFINE_PER_CPU(unsigned char, cpu_16bit_stack[CPU_16BIT_STACK_SIZE]); EXPORT_PER_CPU_SYMBOL(cpu_16bit_stack); static int cachesize_override __cpuinitdata = -1; -static int disable_x86_fxsr __cpuinitdata = 0; +static int disable_x86_fxsr __cpuinitdata; static int disable_x86_serial_nr __cpuinitdata = 1; +static int disable_x86_sep __cpuinitdata; struct cpu_dev * cpu_devs[X86_VENDOR_NUM] = {}; @@ -187,6 +188,14 @@ static int __init x86_fxsr_setup(char * s) __setup("nofxsr", x86_fxsr_setup); +static int __init x86_sep_setup(char * s) +{ + disable_x86_sep = 1; + return 1; +} +__setup("nosep", x86_sep_setup); + + /* Standard macro to see if a specific flag is changeable */ static inline int flag_is_changeable_p(u32 flag) { @@ -405,6 +414,10 @@ void __cpuinit identify_cpu(struct cpuinfo_x86 *c) clear_bit(X86_FEATURE_XMM, c->x86_capability); } + /* SEP disabled? */ + if (disable_x86_sep) + clear_bit(X86_FEATURE_SEP, c->x86_capability); + if (disable_pse) clear_bit(X86_FEATURE_PSE, c->x86_capability); -- cgit v1.2.3-18-g5258 From 54a20f8c5d778ed3603130de4b92f64405228611 Mon Sep 17 00:00:00 2001 From: Chuck Ebbert <76306.1226@compuserve.com> Date: Thu, 23 Mar 2006 02:59:36 -0800 Subject: [PATCH] i386: fall back to sensible CPU model name When vendor-specific i386 initialization code is unavailable the kernel falls back to a default CPU model name. Make that model name reflect the CPU family instead of an internal vendor index. Tested on Pentium II (family 6 model 5). /proc/cpuinfo before: model name : ff/05 after: model name : 06/05 Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Acked-by: "Seth, Rohit" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/cpu/common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c index bbfc278dfa4..7e3d6b6a4e9 100644 --- a/arch/i386/kernel/cpu/common.c +++ b/arch/i386/kernel/cpu/common.c @@ -430,7 +430,7 @@ void __cpuinit identify_cpu(struct cpuinfo_x86 *c) else /* Last resort... */ sprintf(c->x86_model_id, "%02x/%02x", - c->x86_vendor, c->x86_model); + c->x86, c->x86_model); } /* Now the feature flags better reflect actual CPU features! */ -- cgit v1.2.3-18-g5258 From e5428ede94179ddccaa56308e0f194fa299edbb4 Mon Sep 17 00:00:00 2001 From: "Natalie.Protasevich@unisys.com" Date: Thu, 23 Mar 2006 02:59:36 -0800 Subject: [PATCH] Compilation fix for ES7000 when no ACPI is specified in config (i386) ES7000 platform code clean up for compilation errors and a warning. Ifdef'd the ACPI related parts in the ES7000 platform code. They were causing compile errors in certain configuration (without ACPI defined). I think this approach would be best (as opposed to Kconfig changes) since it only touches the subarch... Signed-off-by: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/mpparse.c | 4 ++-- arch/i386/mach-es7000/es7000.h | 5 ++++- arch/i386/mach-es7000/es7000plat.c | 6 ++---- 3 files changed, 8 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/mpparse.c b/arch/i386/kernel/mpparse.c index e6e2f43db85..e85e463af7c 100644 --- a/arch/i386/kernel/mpparse.c +++ b/arch/i386/kernel/mpparse.c @@ -828,6 +828,8 @@ void __init find_smp_config (void) smp_scan_config(address, 0x400); } +int es7000_plat; + /* -------------------------------------------------------------------------- ACPI-based MP Configuration -------------------------------------------------------------------------- */ @@ -1011,8 +1013,6 @@ void __init mp_override_legacy_irq ( return; } -int es7000_plat; - void __init mp_config_acpi_legacy_irqs (void) { struct mpc_config_intsrc intsrc; diff --git a/arch/i386/mach-es7000/es7000.h b/arch/i386/mach-es7000/es7000.h index f1e3204f5de..80566ca4a80 100644 --- a/arch/i386/mach-es7000/es7000.h +++ b/arch/i386/mach-es7000/es7000.h @@ -83,6 +83,7 @@ struct es7000_oem_table { struct psai psai; }; +#ifdef CONFIG_ACPI struct acpi_table_sdt { unsigned long pa; unsigned long count; @@ -99,6 +100,9 @@ struct oem_table { u32 OEMTableSize; }; +extern int find_unisys_acpi_oem_table(unsigned long *oem_addr); +#endif + struct mip_reg { unsigned long long off_0; unsigned long long off_8; @@ -114,7 +118,6 @@ struct mip_reg { #define MIP_FUNC(VALUE) (VALUE & 0xff) extern int parse_unisys_oem (char *oemptr); -extern int find_unisys_acpi_oem_table(unsigned long *oem_addr); extern void setup_unisys(void); extern int es7000_start_cpu(int cpu, unsigned long eip); extern void es7000_sw_apic(void); diff --git a/arch/i386/mach-es7000/es7000plat.c b/arch/i386/mach-es7000/es7000plat.c index a9ab0644f40..3d0fc853516 100644 --- a/arch/i386/mach-es7000/es7000plat.c +++ b/arch/i386/mach-es7000/es7000plat.c @@ -51,8 +51,6 @@ struct mip_reg *host_reg; int mip_port; unsigned long mip_addr, host_addr; -#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_ACPI) - /* * GSI override for ES7000 platforms. */ @@ -76,8 +74,6 @@ es7000_rename_gsi(int ioapic, int gsi) return gsi; } -#endif /* (CONFIG_X86_IO_APIC) && (CONFIG_ACPI) */ - void __init setup_unisys(void) { @@ -160,6 +156,7 @@ parse_unisys_oem (char *oemptr) return es7000_plat; } +#ifdef CONFIG_ACPI int __init find_unisys_acpi_oem_table(unsigned long *oem_addr) { @@ -212,6 +209,7 @@ find_unisys_acpi_oem_table(unsigned long *oem_addr) } return -1; } +#endif static void es7000_spin(int n) -- cgit v1.2.3-18-g5258 From cc04ee9cc527e314e6906849ee931c33764f861e Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 23 Mar 2006 02:59:38 -0800 Subject: [PATCH] i386 traps: merge printk calls Merge a few printk calls in i386 traps. Signed-off-by: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/traps.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c index ee61988f61b..f20797b8da1 100644 --- a/arch/i386/kernel/traps.c +++ b/arch/i386/kernel/traps.c @@ -188,8 +188,7 @@ static void show_trace_log_lvl(struct task_struct *task, stack = (unsigned long*)context->previous_esp; if (!stack) break; - printk(log_lvl); - printk(" =======================\n"); + printk("%s =======================\n", log_lvl); } } @@ -218,14 +217,12 @@ static void show_stack_log_lvl(struct task_struct *task, unsigned long *esp, break; if (i && ((i % 8) == 0)) { printk("\n"); - printk(log_lvl); - printk(" "); + printk("%s ", log_lvl); } printk("%08lx ", *stack++); } printk("\n"); - printk(log_lvl); - printk("Call Trace:\n"); + printk("%sCall Trace:\n", log_lvl); show_trace_log_lvl(task, esp, log_lvl); } -- cgit v1.2.3-18-g5258 From 3c36c6aa4aa1b3483c6a0370028608367426f58e Mon Sep 17 00:00:00 2001 From: Chuck Ebbert <76306.1226@compuserve.com> Date: Thu, 23 Mar 2006 02:59:39 -0800 Subject: [PATCH] i386: Don't let ptrace set the nested task bit There's no good reason for allowing ptrace to set the NT bit in EFLAGS, so mask it off. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/ptrace.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/ptrace.c b/arch/i386/kernel/ptrace.c index 5c1fb6aada5..506462ef36a 100644 --- a/arch/i386/kernel/ptrace.c +++ b/arch/i386/kernel/ptrace.c @@ -34,10 +34,10 @@ /* * Determines which flags the user has access to [1 = access, 0 = no access]. - * Prohibits changing ID(21), VIP(20), VIF(19), VM(17), IOPL(12-13), IF(9). + * Prohibits changing ID(21), VIP(20), VIF(19), VM(17), NT(14), IOPL(12-13), IF(9). * Also masks reserved bits (31-22, 15, 5, 3, 1). */ -#define FLAG_MASK 0x00054dd5 +#define FLAG_MASK 0x00050dd5 /* set's the trap flag. */ #define TRAP_FLAG 0x100 -- cgit v1.2.3-18-g5258 From 8bed51cd17464433a0c77afc8a5150e51d3da37d Mon Sep 17 00:00:00 2001 From: Chuck Ebbert <76306.1226@compuserve.com> Date: Thu, 23 Mar 2006 02:59:40 -0800 Subject: [PATCH] i386: let signal handlers set the resume flag Allow signal handlers to set the RF bit in EFLAGS. This lets a simple debugger using SIGTRAP skip one instruction after returning from a signal. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/signal.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/i386/kernel/signal.c b/arch/i386/kernel/signal.c index 963616d364e..608eac4a732 100644 --- a/arch/i386/kernel/signal.c +++ b/arch/i386/kernel/signal.c @@ -123,7 +123,8 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *peax err |= __get_user(tmp, &sc->seg); \ loadsegment(seg,tmp); } -#define FIX_EFLAGS (X86_EFLAGS_AC | X86_EFLAGS_OF | X86_EFLAGS_DF | \ +#define FIX_EFLAGS (X86_EFLAGS_AC | X86_EFLAGS_RF | \ + X86_EFLAGS_OF | X86_EFLAGS_DF | \ X86_EFLAGS_TF | X86_EFLAGS_SF | X86_EFLAGS_ZF | \ X86_EFLAGS_AF | X86_EFLAGS_PF | X86_EFLAGS_CF) -- cgit v1.2.3-18-g5258 From 99b7de33477882b86d54ce8ecbf90147f9d106d7 Mon Sep 17 00:00:00 2001 From: Stas Sergeev Date: Thu, 23 Mar 2006 02:59:41 -0800 Subject: [PATCH] x86: early printk handling fixes The history is that -mm kernels do not work for me for a few months already. The things started from crashing somewhere after starting init, and for the last month - no boot at all, just "Uncompressing... OK, booting kernel", and silence. Early console didn't work too. With the latest releases this degraded into an infinite stream of the "Unknown interrupt or fault" messages. So today my patience ran out and I started to think how can I collect at least some info for the bug-report. Attached is the patch that allows to gather some valueable debug info on the problem by making an early console more useable. I can't properly test the patch, as the kernel still doesn't boot, so I'll explain it in details in a hope someone else can justify the intrusive changes. arch_hooks.h: added prototypes for setup_early_printk() and early_printk(). setup.c: killed wrong setup_early_printk() prototype. Moved setup_early_printk() a bit earlier, as it was not "early enough" to cover the bug I was fighting with. early_printk.c: made it to start printing from the bottom of the screen, otherwise the messages interfere with the ones of the boot-loader, so you can't read them. Signed-off-by: Stas Sergeev Cc: Andi Kleen Cc: Zwane Mwaikambo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/setup.c | 23 ++++++++++------------- arch/x86_64/kernel/early_printk.c | 3 ++- 2 files changed, 12 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c index 5f58f8cb983..2d8782960f4 100644 --- a/arch/i386/kernel/setup.c +++ b/arch/i386/kernel/setup.c @@ -1459,6 +1459,16 @@ void __init setup_arch(char **cmdline_p) parse_cmdline_early(cmdline_p); +#ifdef CONFIG_EARLY_PRINTK + { + char *s = strstr(*cmdline_p, "earlyprintk="); + if (s) { + setup_early_printk(strchr(s, '=') + 1); + printk("early console enabled\n"); + } + } +#endif + max_low_pfn = setup_memory(); /* @@ -1483,19 +1493,6 @@ void __init setup_arch(char **cmdline_p) * NOTE: at this point the bootmem allocator is fully available. */ -#ifdef CONFIG_EARLY_PRINTK - { - char *s = strstr(*cmdline_p, "earlyprintk="); - if (s) { - extern void setup_early_printk(char *); - - setup_early_printk(strchr(s, '=') + 1); - printk("early console enabled\n"); - } - } -#endif - - dmi_scan_machine(); #ifdef CONFIG_X86_GENERICARCH diff --git a/arch/x86_64/kernel/early_printk.c b/arch/x86_64/kernel/early_printk.c index 6dffb498ccd..6fcdcb80b07 100644 --- a/arch/x86_64/kernel/early_printk.c +++ b/arch/x86_64/kernel/early_printk.c @@ -21,7 +21,7 @@ #define MAX_XPOS max_xpos static int max_ypos = 25, max_xpos = 80; -static int current_ypos = 1, current_xpos = 0; +static int current_ypos = 25, current_xpos = 0; static void early_vga_write(struct console *con, const char *str, unsigned n) { @@ -244,6 +244,7 @@ int __init setup_early_printk(char *opt) && SCREEN_INFO.orig_video_isVGA == 1) { max_xpos = SCREEN_INFO.orig_video_cols; max_ypos = SCREEN_INFO.orig_video_lines; + current_ypos = max_ypos; early_console = &early_vga_console; } else if (!strncmp(buf, "simnow", 6)) { simnow_init(buf + 6); -- cgit v1.2.3-18-g5258 From 98e7d9b0529b6a348f2978a926806930a9902067 Mon Sep 17 00:00:00 2001 From: Chuck Ebbert <76306.1226@compuserve.com> Date: Thu, 23 Mar 2006 02:59:42 -0800 Subject: [PATCH] x86: start early_printk at sensible screen row Use boot info to start early_printk() at the current row on VGA console, as left by the boot loader. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Cc: Stas Sergeev Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/early_printk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/early_printk.c b/arch/x86_64/kernel/early_printk.c index 6fcdcb80b07..484025f4f08 100644 --- a/arch/x86_64/kernel/early_printk.c +++ b/arch/x86_64/kernel/early_printk.c @@ -244,7 +244,7 @@ int __init setup_early_printk(char *opt) && SCREEN_INFO.orig_video_isVGA == 1) { max_xpos = SCREEN_INFO.orig_video_cols; max_ypos = SCREEN_INFO.orig_video_lines; - current_ypos = max_ypos; + current_ypos = SCREEN_INFO.orig_y; early_console = &early_vga_console; } else if (!strncmp(buf, "simnow", 6)) { simnow_init(buf + 6); -- cgit v1.2.3-18-g5258 From ffa930ef55ae82c09e30b2a0c4ce5d7fdea041e2 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 23 Mar 2006 02:59:43 -0800 Subject: [PATCH] x86: early_printk(): remove MAX_YPOS and MAX_XPOS macros Expand out these fairly pointless macros. Cc: Chuck Ebbert <76306.1226@compuserve.com> Cc: Stas Sergeev Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/early_printk.c | 23 ++++++++++------------- 1 file changed, 10 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/early_printk.c b/arch/x86_64/kernel/early_printk.c index 484025f4f08..a8a6aa70d69 100644 --- a/arch/x86_64/kernel/early_printk.c +++ b/arch/x86_64/kernel/early_printk.c @@ -17,9 +17,6 @@ #define VGABASE ((void __iomem *)0xffffffff800b8000UL) #endif -#define MAX_YPOS max_ypos -#define MAX_XPOS max_xpos - static int max_ypos = 25, max_xpos = 80; static int current_ypos = 25, current_xpos = 0; @@ -29,26 +26,26 @@ static void early_vga_write(struct console *con, const char *str, unsigned n) int i, k, j; while ((c = *str++) != '\0' && n-- > 0) { - if (current_ypos >= MAX_YPOS) { + if (current_ypos >= max_ypos) { /* scroll 1 line up */ - for (k = 1, j = 0; k < MAX_YPOS; k++, j++) { - for (i = 0; i < MAX_XPOS; i++) { - writew(readw(VGABASE + 2*(MAX_XPOS*k + i)), - VGABASE + 2*(MAX_XPOS*j + i)); + for (k = 1, j = 0; k < max_ypos; k++, j++) { + for (i = 0; i < max_xpos; i++) { + writew(readw(VGABASE+2*(max_xpos*k+i)), + VGABASE + 2*(max_xpos*j + i)); } } - for (i = 0; i < MAX_XPOS; i++) - writew(0x720, VGABASE + 2*(MAX_XPOS*j + i)); - current_ypos = MAX_YPOS-1; + for (i = 0; i < max_xpos; i++) + writew(0x720, VGABASE + 2*(max_xpos*j + i)); + current_ypos = max_ypos-1; } if (c == '\n') { current_xpos = 0; current_ypos++; } else if (c != '\r') { writew(((0x7 << 8) | (unsigned short) c), - VGABASE + 2*(MAX_XPOS*current_ypos + + VGABASE + 2*(max_xpos*current_ypos + current_xpos++)); - if (current_xpos >= MAX_XPOS) { + if (current_xpos >= max_xpos) { current_xpos = 0; current_ypos++; } -- cgit v1.2.3-18-g5258 From 101f12af16fb12f8da8100899a13ee1b1b576a0a Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 23 Mar 2006 02:59:45 -0800 Subject: [PATCH] i386: actively synchronize vmalloc area when registering certain callbacks Registering a callback handler through register_die_notifier() is obviously primarily intended for use by modules. However, the way these currently get called it is basically impossible for them to actually be used by modules, as there is, on non-PAE configurationes, a good chance (the larger the module, the better) for the system to crash as a result. This is because the callback gets invoked (a) in the page fault path before the top level page table propagation gets carried out (hence a fault to propagate the top level page table entry/entries mapping to module's code/data would nest infinitly) and (b) in the NMI path, where nested faults must absolutely not happen, since otherwise the IRET from the nested fault re-enables NMIs, potentially resulting in nested NMI occurences. Besides the modular aspect, similar problems would even arise for in- kernel consumers of the API if they touched ioremap()ed or vmalloc()ed memory inside their handlers. Signed-off-by: Jan Beulich Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/traps.c | 3 + arch/i386/mm/fault.c | 173 +++++++++++++++++++++++++++++++---------------- 2 files changed, 119 insertions(+), 57 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c index f20797b8da1..d510de7e4f2 100644 --- a/arch/i386/kernel/traps.c +++ b/arch/i386/kernel/traps.c @@ -99,6 +99,8 @@ int register_die_notifier(struct notifier_block *nb) { int err = 0; unsigned long flags; + + vmalloc_sync_all(); spin_lock_irqsave(&die_notifier_lock, flags); err = notifier_chain_register(&i386die_chain, nb); spin_unlock_irqrestore(&die_notifier_lock, flags); @@ -713,6 +715,7 @@ fastcall void do_nmi(struct pt_regs * regs, long error_code) void set_nmi_callback(nmi_callback_t callback) { + vmalloc_sync_all(); rcu_assign_pointer(nmi_callback, callback); } EXPORT_SYMBOL_GPL(set_nmi_callback); diff --git a/arch/i386/mm/fault.c b/arch/i386/mm/fault.c index cf572d9a3b6..bbb24af5d86 100644 --- a/arch/i386/mm/fault.c +++ b/arch/i386/mm/fault.c @@ -214,6 +214,68 @@ static noinline void force_sig_info_fault(int si_signo, int si_code, fastcall void do_invalid_op(struct pt_regs *, unsigned long); +static inline pmd_t *vmalloc_sync_one(pgd_t *pgd, unsigned long address) +{ + unsigned index = pgd_index(address); + pgd_t *pgd_k; + pud_t *pud, *pud_k; + pmd_t *pmd, *pmd_k; + + pgd += index; + pgd_k = init_mm.pgd + index; + + if (!pgd_present(*pgd_k)) + return NULL; + + /* + * set_pgd(pgd, *pgd_k); here would be useless on PAE + * and redundant with the set_pmd() on non-PAE. As would + * set_pud. + */ + + pud = pud_offset(pgd, address); + pud_k = pud_offset(pgd_k, address); + if (!pud_present(*pud_k)) + return NULL; + + pmd = pmd_offset(pud, address); + pmd_k = pmd_offset(pud_k, address); + if (!pmd_present(*pmd_k)) + return NULL; + if (!pmd_present(*pmd)) + set_pmd(pmd, *pmd_k); + else + BUG_ON(pmd_page(*pmd) != pmd_page(*pmd_k)); + return pmd_k; +} + +/* + * Handle a fault on the vmalloc or module mapping area + * + * This assumes no large pages in there. + */ +static inline int vmalloc_fault(unsigned long address) +{ + unsigned long pgd_paddr; + pmd_t *pmd_k; + pte_t *pte_k; + /* + * Synchronize this task's top level page-table + * with the 'reference' page table. + * + * Do _not_ use "current" here. We might be inside + * an interrupt in the middle of a task switch.. + */ + pgd_paddr = read_cr3(); + pmd_k = vmalloc_sync_one(__va(pgd_paddr), address); + if (!pmd_k) + return -1; + pte_k = pte_offset_kernel(pmd_k, address); + if (!pte_present(*pte_k)) + return -1; + return 0; +} + /* * This routine handles page faults. It determines the address, * and the problem, and then passes it off to one of the appropriate @@ -223,6 +285,8 @@ fastcall void do_invalid_op(struct pt_regs *, unsigned long); * bit 0 == 0 means no page found, 1 means protection fault * bit 1 == 0 means read, 1 means write * bit 2 == 0 means kernel, 1 means user-mode + * bit 3 == 1 means use of reserved bit detected + * bit 4 == 1 means fault was an instruction fetch */ fastcall void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code) @@ -237,13 +301,6 @@ fastcall void __kprobes do_page_fault(struct pt_regs *regs, /* get the address */ address = read_cr2(); - if (notify_die(DIE_PAGE_FAULT, "page fault", regs, error_code, 14, - SIGSEGV) == NOTIFY_STOP) - return; - /* It's safe to allow irq's after cr2 has been saved */ - if (regs->eflags & (X86_EFLAGS_IF|VM_MASK)) - local_irq_enable(); - tsk = current; si_code = SEGV_MAPERR; @@ -259,17 +316,29 @@ fastcall void __kprobes do_page_fault(struct pt_regs *regs, * * This verifies that the fault happens in kernel space * (error_code & 4) == 0, and that the fault was not a - * protection error (error_code & 1) == 0. + * protection error (error_code & 9) == 0. */ - if (unlikely(address >= TASK_SIZE)) { - if (!(error_code & 5)) - goto vmalloc_fault; - /* + if (unlikely(address >= TASK_SIZE)) { + if (!(error_code & 0x0000000d) && vmalloc_fault(address) >= 0) + return; + if (notify_die(DIE_PAGE_FAULT, "page fault", regs, error_code, 14, + SIGSEGV) == NOTIFY_STOP) + return; + /* * Don't take the mm semaphore here. If we fixup a prefetch * fault we could otherwise deadlock. */ goto bad_area_nosemaphore; - } + } + + if (notify_die(DIE_PAGE_FAULT, "page fault", regs, error_code, 14, + SIGSEGV) == NOTIFY_STOP) + return; + + /* It's safe to allow irq's after cr2 has been saved and the vmalloc + fault has been handled. */ + if (regs->eflags & (X86_EFLAGS_IF|VM_MASK)) + local_irq_enable(); mm = tsk->mm; @@ -510,51 +579,41 @@ do_sigbus: tsk->thread.error_code = error_code; tsk->thread.trap_no = 14; force_sig_info_fault(SIGBUS, BUS_ADRERR, address, tsk); - return; - -vmalloc_fault: - { - /* - * Synchronize this task's top level page-table - * with the 'reference' page table. - * - * Do _not_ use "tsk" here. We might be inside - * an interrupt in the middle of a task switch.. - */ - int index = pgd_index(address); - unsigned long pgd_paddr; - pgd_t *pgd, *pgd_k; - pud_t *pud, *pud_k; - pmd_t *pmd, *pmd_k; - pte_t *pte_k; - - pgd_paddr = read_cr3(); - pgd = index + (pgd_t *)__va(pgd_paddr); - pgd_k = init_mm.pgd + index; - - if (!pgd_present(*pgd_k)) - goto no_context; - - /* - * set_pgd(pgd, *pgd_k); here would be useless on PAE - * and redundant with the set_pmd() on non-PAE. As would - * set_pud. - */ +} - pud = pud_offset(pgd, address); - pud_k = pud_offset(pgd_k, address); - if (!pud_present(*pud_k)) - goto no_context; - - pmd = pmd_offset(pud, address); - pmd_k = pmd_offset(pud_k, address); - if (!pmd_present(*pmd_k)) - goto no_context; - set_pmd(pmd, *pmd_k); +#ifndef CONFIG_X86_PAE +void vmalloc_sync_all(void) +{ + /* + * Note that races in the updates of insync and start aren't + * problematic: insync can only get set bits added, and updates to + * start are only improving performance (without affecting correctness + * if undone). + */ + static DECLARE_BITMAP(insync, PTRS_PER_PGD); + static unsigned long start = TASK_SIZE; + unsigned long address; - pte_k = pte_offset_kernel(pmd_k, address); - if (!pte_present(*pte_k)) - goto no_context; - return; + BUILD_BUG_ON(TASK_SIZE & ~PGDIR_MASK); + for (address = start; address >= TASK_SIZE; address += PGDIR_SIZE) { + if (!test_bit(pgd_index(address), insync)) { + unsigned long flags; + struct page *page; + + spin_lock_irqsave(&pgd_lock, flags); + for (page = pgd_list; page; page = + (struct page *)page->index) + if (!vmalloc_sync_one(page_address(page), + address)) { + BUG_ON(page != pgd_list); + break; + } + spin_unlock_irqrestore(&pgd_lock, flags); + if (!page) + set_bit(pgd_index(address), insync); + } + if (address == start && test_bit(pgd_index(address), insync)) + start = address + PGDIR_SIZE; } } +#endif -- cgit v1.2.3-18-g5258 From db753bdfc24c31228996799d508ce3bf7cbe3b99 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 23 Mar 2006 02:59:46 -0800 Subject: [PATCH] i386: fix uses of user_mode() vs. user_mode_vm() >commit 76381fee7e8feb4c22be636aa5d4765dbe4fbf9e >Author: Vincent Hanquez >Date: Thu Jun 23 00:08:46 2005 -0700 > > [PATCH] xen: x86_64: use more usermode macro > > Make use of the user_mode macro where it's possible. This is useful for Xen > because it will need only to redefine only the macro to a hypervisor call. I am of the opinion that the above changeset is incomplete, i.e. it missed converting some previous uses of user_mode to user_mode_vm. While most of them could be considered just cosmetical, at least the one in die_nmi doesn't appear to be. Signed-off-by: Jan Beulich Cc: Vincent Hanquez Cc: Zachary Amsden Cc: James Bottomley Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/crash.c | 2 +- arch/i386/kernel/process.c | 2 +- arch/i386/kernel/traps.c | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/crash.c b/arch/i386/kernel/crash.c index d49dbe8dc96..e3c5fca0aa8 100644 --- a/arch/i386/kernel/crash.c +++ b/arch/i386/kernel/crash.c @@ -105,7 +105,7 @@ static int crash_nmi_callback(struct pt_regs *regs, int cpu) return 1; local_irq_disable(); - if (!user_mode(regs)) { + if (!user_mode_vm(regs)) { crash_fixup_ss_esp(&fixed_regs, regs); regs = &fixed_regs; } diff --git a/arch/i386/kernel/process.c b/arch/i386/kernel/process.c index 0480454ebff..299e6167408 100644 --- a/arch/i386/kernel/process.c +++ b/arch/i386/kernel/process.c @@ -295,7 +295,7 @@ void show_regs(struct pt_regs * regs) printk("EIP: %04x:[<%08lx>] CPU: %d\n",0xffff & regs->xcs,regs->eip, smp_processor_id()); print_symbol("EIP is at %s\n", regs->eip); - if (user_mode(regs)) + if (user_mode_vm(regs)) printk(" ESP: %04x:%08lx",0xffff & regs->xss,regs->esp); printk(" EFLAGS: %08lx %s (%s %.*s)\n", regs->eflags, print_tainted(), system_utsname.release, diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c index d510de7e4f2..a807a2da581 100644 --- a/arch/i386/kernel/traps.c +++ b/arch/i386/kernel/traps.c @@ -254,7 +254,7 @@ void show_registers(struct pt_regs *regs) esp = (unsigned long) (®s->esp); savesegment(ss, ss); - if (user_mode(regs)) { + if (user_mode_vm(regs)) { in_kernel = 0; esp = regs->esp; ss = regs->xss & 0xffff; @@ -644,7 +644,7 @@ void die_nmi (struct pt_regs *regs, const char *msg) /* If we are in kernel we are probably nested up pretty bad * and might aswell get out now while we still can. */ - if (!user_mode(regs)) { + if (!user_mode_vm(regs)) { current->thread.trap_no = 2; crash_kexec(regs); } -- cgit v1.2.3-18-g5258 From 635cf99a80f4ebee59d70eb64bb85ce829e4591f Mon Sep 17 00:00:00 2001 From: Chuck Ebbert <76306.1226@compuserve.com> Date: Thu, 23 Mar 2006 02:59:48 -0800 Subject: [PATCH] i386: fix singlestep through an int80 syscall Using PTRACE_SINGLESTEP on a child that does an int80 syscall misses the SIGTRAP that should be delivered upon syscall exit. Fix that by setting TIF_SINGLESTEP when entering the kernel via int80 with TF set. /* Test whether singlestep through an int80 syscall works. */ #define _GNU_SOURCE #include #include #include #include #include #include #include static int child, status; static struct user_regs_struct regs; static void do_child() { ptrace(PTRACE_TRACEME, 0, 0, 0); kill(getpid(), SIGUSR1); asm ("int $0x80" : : "a" (20)); /* getpid */ } static void do_parent() { unsigned long eip, expected = 0; again: waitpid(child, &status, 0); if (WIFEXITED(status) || WIFSIGNALED(status)) return; if (WIFSTOPPED(status)) { ptrace(PTRACE_GETREGS, child, 0, ®s); eip = regs.eip; if (expected) fprintf(stderr, "child stop @ %08x, expected %08x %s\n", eip, expected, eip == expected ? "" : " <== ERROR"); if (*(unsigned short *)eip == 0x80cd) { fprintf(stderr, "int 0x80 at %08x\n", (unsigned int)eip); expected = eip + 2; } else expected = 0; ptrace(PTRACE_SINGLESTEP, child, NULL, NULL); } goto again; } int main(int argc, char * const argv[]) { child = fork(); if (child) do_parent(); else do_child(); return 0; } Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/entry.S | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/i386/kernel/entry.S b/arch/i386/kernel/entry.S index 4d704724b2f..cfc683f153b 100644 --- a/arch/i386/kernel/entry.S +++ b/arch/i386/kernel/entry.S @@ -226,6 +226,10 @@ ENTRY(system_call) pushl %eax # save orig_eax SAVE_ALL GET_THREAD_INFO(%ebp) + testl $TF_MASK,EFLAGS(%esp) + jz no_singlestep + orl $_TIF_SINGLESTEP,TI_flags(%ebp) +no_singlestep: # system call tracing in operation / emulation /* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */ testw $(_TIF_SYSCALL_EMU|_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp) -- cgit v1.2.3-18-g5258 From be0a39120cb6b88bd085a3a280f5c769a3ed85ad Mon Sep 17 00:00:00 2001 From: Chuck Ebbert <76306.1226@compuserve.com> Date: Thu, 23 Mar 2006 02:59:48 -0800 Subject: [PATCH] i386: more vsyscall documentation Document a limitation of vsyscall-sysenter, since patches to fix it have been rejected. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/vsyscall-sysenter.S | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/i386/kernel/vsyscall-sysenter.S b/arch/i386/kernel/vsyscall-sysenter.S index 76b72815940..3b62baa6a37 100644 --- a/arch/i386/kernel/vsyscall-sysenter.S +++ b/arch/i386/kernel/vsyscall-sysenter.S @@ -21,6 +21,9 @@ * instruction clobbers %esp, the user's %esp won't even survive entry * into the kernel. We store %esp in %ebp. Code in entry.S must fetch * arg6 from the stack. + * + * You can not use this vsyscall for the clone() syscall because the + * three dwords on the parent stack do not get copied to the child. */ .text .globl __kernel_vsyscall -- cgit v1.2.3-18-g5258 From 382dbd07c9cb4f255c28f680996ad819a8ce9bfe Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Thu, 23 Mar 2006 02:59:49 -0800 Subject: [PATCH] fix implicit declaration of GET_APIC_ID in arch/i386/kernel/apic.c arch/i386/kernel/apic.c:840: warning: implicit declaration of function `GET_APIC_ID' Signed-off-by: Jesper Juhl Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/apic.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c index 776c90989e0..eb5279d23b7 100644 --- a/arch/i386/kernel/apic.c +++ b/arch/i386/kernel/apic.c @@ -38,6 +38,7 @@ #include #include +#include #include #include "io_ports.h" -- cgit v1.2.3-18-g5258 From 52f4a91afd9316fb4f0f3a77c5ff56b9c98632ea Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Thu, 23 Mar 2006 02:59:50 -0800 Subject: [PATCH] Fix the imlicit declaration of mtrr_centaur_report_mcr in arch/i386/kernel/cpu/centaur.c arch/i386/kernel/cpu/centaur.c: In function `centaur_mcr_insert': arch/i386/kernel/cpu/centaur.c:33: warning: implicit declaration of function `mtrr_centaur_report_mcr' Signed-off-by: Jesper Juhl Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/cpu/centaur.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/centaur.c b/arch/i386/kernel/cpu/centaur.c index f52669ecb93..bd75629dd26 100644 --- a/arch/i386/kernel/cpu/centaur.c +++ b/arch/i386/kernel/cpu/centaur.c @@ -4,6 +4,7 @@ #include #include #include +#include #include "cpu.h" #ifdef CONFIG_X86_OOSTORE -- cgit v1.2.3-18-g5258 From 4ef0652a74d9c460299b00566d033bd45d60da98 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 23 Mar 2006 02:59:51 -0800 Subject: [PATCH] i386: cleanup after cpu_gdt_descr conversion to per-cpu data With cpu_gdt_descr having been converted to per-CPU data, the old object (in head.S) no longer needs to reserve space for each CPU's instance. With cpu_gdt_table not being used for CPU 0 anymore, it doesn't seem to need page alignment (or if in fact there is a need for it to retain that alignment, the whole object should go into .data.page_align). Signed-off-by: Jan Beulich Acked-by: Zachary Amsden Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/head.S | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/head.S b/arch/i386/kernel/head.S index e0b7c632efb..3debc2e2654 100644 --- a/arch/i386/kernel/head.S +++ b/arch/i386/kernel/head.S @@ -450,7 +450,6 @@ int_msg: .globl boot_gdt_descr .globl idt_descr -.globl cpu_gdt_descr ALIGN # early boot GDT descriptor (must use 1:1 address mapping) @@ -470,8 +469,6 @@ cpu_gdt_descr: .word GDT_ENTRIES*8-1 .long cpu_gdt_table - .fill NR_CPUS-1,8,0 # space for the other GDT descriptors - /* * The boot_gdt_table must mirror the equivalent in setup.S and is * used only for booting. @@ -485,7 +482,7 @@ ENTRY(boot_gdt_table) /* * The Global Descriptor Table contains 28 quadwords, per-CPU. */ - .align PAGE_SIZE_asm + .align L1_CACHE_BYTES ENTRY(cpu_gdt_table) .quad 0x0000000000000000 /* NULL descriptor */ .quad 0x0000000000000000 /* 0x0b reserved */ -- cgit v1.2.3-18-g5258 From 75874d5cc8efef22457072e14103dc55f164e64e Mon Sep 17 00:00:00 2001 From: Chuck Ebbert <76306.1226@compuserve.com> Date: Thu, 23 Mar 2006 02:59:52 -0800 Subject: [PATCH] i386: fix dump_stack() i386 has a small bug in the stack dump code where it prints an extra log level code. Remove that and fix the alignment of normal stack dump printout. Also remove some unnecessary printk() calls. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/traps.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c index a807a2da581..1b7ad4115d8 100644 --- a/arch/i386/kernel/traps.c +++ b/arch/i386/kernel/traps.c @@ -217,19 +217,17 @@ static void show_stack_log_lvl(struct task_struct *task, unsigned long *esp, for(i = 0; i < kstack_depth_to_print; i++) { if (kstack_end(stack)) break; - if (i && ((i % 8) == 0)) { - printk("\n"); - printk("%s ", log_lvl); - } + if (i && ((i % 8) == 0)) + printk("\n%s ", log_lvl); printk("%08lx ", *stack++); } - printk("\n"); - printk("%sCall Trace:\n", log_lvl); + printk("\n%sCall Trace:\n", log_lvl); show_trace_log_lvl(task, esp, log_lvl); } void show_stack(struct task_struct *task, unsigned long *esp) { + printk(" "); show_stack_log_lvl(task, esp, ""); } -- cgit v1.2.3-18-g5258 From f2d0d263b51d13efe55f0aae9254b69ba2855f1c Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Thu, 23 Mar 2006 02:59:52 -0800 Subject: [PATCH] x86: cpuid.4 doesn't need cpu level 5 Detecting cache line using cpuid.4, cpuid level 4 is enough. Signed-off-by: Shaohua Li Cc: Dave Jones Cc: "Seth, Rohit" Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/cpu/intel_cacheinfo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/intel_cacheinfo.c b/arch/i386/kernel/cpu/intel_cacheinfo.c index 36c9b370663..ce61921369e 100644 --- a/arch/i386/kernel/cpu/intel_cacheinfo.c +++ b/arch/i386/kernel/cpu/intel_cacheinfo.c @@ -174,7 +174,7 @@ unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c) unsigned int new_l1d = 0, new_l1i = 0; /* Cache sizes from cpuid(4) */ unsigned int new_l2 = 0, new_l3 = 0, i; /* Cache sizes from cpuid(4) */ - if (c->cpuid_level > 4) { + if (c->cpuid_level > 3) { static int is_initialized; if (is_initialized == 0) { -- cgit v1.2.3-18-g5258 From 7c5c1e427b5e83807fd05419d1cf6991b9d87247 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Thu, 23 Mar 2006 02:59:53 -0800 Subject: [PATCH] x86: deterine xapic using apic version Checking APIC version instead of CPU family to determine XAPIC. Family 6 CPU could have xapic as well. Signed-off-by: Shaohua Li Cc: Dave Jones Cc: "Seth, Rohit" Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/io_apic.c | 3 ++- arch/i386/kernel/mpparse.c | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c index 39d9a5fa907..fd1c60cfd29 100644 --- a/arch/i386/kernel/io_apic.c +++ b/arch/i386/kernel/io_apic.c @@ -1761,7 +1761,8 @@ static void __init setup_ioapic_ids_from_mpc(void) * Don't check I/O APIC IDs for xAPIC systems. They have * no meaning without the serial APIC bus. */ - if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && boot_cpu_data.x86 < 15)) + if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) + || APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) return; /* * This is broken; anything with a real cpu count has to diff --git a/arch/i386/kernel/mpparse.c b/arch/i386/kernel/mpparse.c index e85e463af7c..8d8aa9d1796 100644 --- a/arch/i386/kernel/mpparse.c +++ b/arch/i386/kernel/mpparse.c @@ -937,7 +937,8 @@ void __init mp_register_ioapic ( mp_ioapics[idx].mpc_apicaddr = address; set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); - if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && (boot_cpu_data.x86 < 15)) + if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) + && !APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) tmpid = io_apic_get_unique_id(idx, id); else tmpid = id; -- cgit v1.2.3-18-g5258 From 905c399594f85322a4e513a4b0365b70d6de9fd0 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Thu, 23 Mar 2006 02:59:55 -0800 Subject: [PATCH] x86: some fixups for the X86_NUMAQ dependencies You must always ensure to fulfill the dependencies of what you are select'ing. Signed-off-by: Adrian Bunk Cc: Martin Bligh Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/Kconfig | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index 5f89c74537e..bfea1bedcbf 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -80,6 +80,7 @@ config X86_VOYAGER config X86_NUMAQ bool "NUMAQ (IBM/Sequent)" + select SMP select NUMA help This option is used for getting Linux to run on a (IBM/Sequent) NUMA @@ -400,6 +401,7 @@ choice config NOHIGHMEM bool "off" + depends on !X86_NUMAQ ---help--- Linux can use up to 64 Gigabytes of physical memory on x86 systems. However, the address space of 32-bit x86 processors is only 4 @@ -436,6 +438,7 @@ config NOHIGHMEM config HIGHMEM4G bool "4GB" + depends on !X86_NUMAQ help Select this if you have a 32-bit processor and between 1 and 4 gigabytes of physical RAM. @@ -503,10 +506,6 @@ config NUMA default n if X86_PC default y if (X86_NUMAQ || X86_SUMMIT) -# Need comments to help the hapless user trying to turn on NUMA support -comment "NUMA (NUMA-Q) requires SMP, 64GB highmem support" - depends on X86_NUMAQ && (!HIGHMEM64G || !SMP) - comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI" depends on X86_SUMMIT && (!HIGHMEM64G || !ACPI) -- cgit v1.2.3-18-g5258 From bdaff4a331db46f3bd953f413316c4603c4004b4 Mon Sep 17 00:00:00 2001 From: Ashok Raj Date: Thu, 23 Mar 2006 02:59:57 -0800 Subject: [PATCH] x86 topology: don;t create a control file for BSP that cannot be removed Don't create "online" control file for BSP (i386/x86_64) since its not removable. We originally added this to support ppc64 if the kernel has support but BIOS indicated no offline support, we just didnt create online files for them. We used the same method in ia64 as well, if we have a cpu taking platform interrupts but cannot be removed if those interrupts cannot be re-targeted to another cpu. Signed-off-by: Ashok Raj Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/topology.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/i386/kernel/topology.c b/arch/i386/kernel/topology.c index 67a0e1baa28..296355292c7 100644 --- a/arch/i386/kernel/topology.c +++ b/arch/i386/kernel/topology.c @@ -41,6 +41,15 @@ int arch_register_cpu(int num){ parent = &node_devices[node].node; #endif /* CONFIG_NUMA */ + /* + * CPU0 cannot be offlined due to several + * restrictions and assumptions in kernel. This basically + * doesnt add a control file, one cannot attempt to offline + * BSP. + */ + if (!num) + cpu_devices[num].cpu.no_control = 1; + return register_cpu(&cpu_devices[num].cpu, num, parent); } -- cgit v1.2.3-18-g5258 From fc558a7496bfab3d29a68953b07a95883fdcfbb1 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 23 Mar 2006 03:00:05 -0800 Subject: [PATCH] swsusp: finally solve mysqld problem This patch from Pavel moves userland freeze signals handling into more logical place. It now hits even with mysqld running. Signed-off-by: Rafael J. Wysocki Signed-off-by: Pavel Machek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/signal.c | 4 ---- arch/x86_64/kernel/signal.c | 4 ---- 2 files changed, 8 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/signal.c b/arch/i386/kernel/signal.c index 608eac4a732..5c352c3a9e7 100644 --- a/arch/i386/kernel/signal.c +++ b/arch/i386/kernel/signal.c @@ -583,9 +583,6 @@ static void fastcall do_signal(struct pt_regs *regs) if (!user_mode(regs)) return; - if (try_to_freeze()) - goto no_signal; - if (test_thread_flag(TIF_RESTORE_SIGMASK)) oldset = ¤t->saved_sigmask; else @@ -614,7 +611,6 @@ static void fastcall do_signal(struct pt_regs *regs) return; } -no_signal: /* Did we come from a system call? */ if (regs->orig_eax >= 0) { /* Restart the system call - no handlers present */ diff --git a/arch/x86_64/kernel/signal.c b/arch/x86_64/kernel/signal.c index 5876df116c9..e5f5ce7909a 100644 --- a/arch/x86_64/kernel/signal.c +++ b/arch/x86_64/kernel/signal.c @@ -443,9 +443,6 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset) if (!user_mode(regs)) return 1; - if (try_to_freeze()) - goto no_signal; - if (!oldset) oldset = ¤t->blocked; @@ -463,7 +460,6 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset) return handle_signal(signr, &info, &ka, oldset, regs); } - no_signal: /* Did we come from a system call? */ if ((long)regs->orig_rax >= 0) { /* Restart the system call - no handlers present */ -- cgit v1.2.3-18-g5258 From b8e31edc10d160a8bf2159541d9d12f2079a0887 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 23 Mar 2006 03:00:09 -0800 Subject: [PATCH] m68k: rtc driver cleanup Use the standard BCD macros instead of redefining them. Signed-off-by: Jean Delvare Cc: Geert Uytterhoeven Cc: Roman Zippel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/m68k/bvme6000/rtc.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/m68k/bvme6000/rtc.c b/arch/m68k/bvme6000/rtc.c index 703cbc6dc9c..15c16b62dff 100644 --- a/arch/m68k/bvme6000/rtc.c +++ b/arch/m68k/bvme6000/rtc.c @@ -18,6 +18,7 @@ #include #include /* For struct rtc_time and ioctls, etc */ #include +#include #include #include @@ -32,9 +33,6 @@ * ioctls. */ -#define BCD2BIN(val) (((val)&15) + ((val)>>4)*10) -#define BIN2BCD(val) ((((val)/10)<<4) + (val)%10) - static unsigned char days_in_mo[] = {0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}; -- cgit v1.2.3-18-g5258 From 7a7d1cf95408863a657035701606b13644c9f55e Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 23 Mar 2006 03:00:35 -0800 Subject: [PATCH] sem2mutex: kprobes Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar Acked-by: Anil S Keshavamurthy Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/kprobes.c | 4 ++-- arch/powerpc/kernel/kprobes.c | 4 ++-- arch/x86_64/kernel/kprobes.c | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/kprobes.c b/arch/i386/kernel/kprobes.c index 694a1399763..7a59050242a 100644 --- a/arch/i386/kernel/kprobes.c +++ b/arch/i386/kernel/kprobes.c @@ -84,9 +84,9 @@ void __kprobes arch_disarm_kprobe(struct kprobe *p) void __kprobes arch_remove_kprobe(struct kprobe *p) { - down(&kprobe_mutex); + mutex_lock(&kprobe_mutex); free_insn_slot(p->ainsn.insn); - up(&kprobe_mutex); + mutex_unlock(&kprobe_mutex); } static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb) diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c index 258039fb301..cb1fe5878e8 100644 --- a/arch/powerpc/kernel/kprobes.c +++ b/arch/powerpc/kernel/kprobes.c @@ -81,9 +81,9 @@ void __kprobes arch_disarm_kprobe(struct kprobe *p) void __kprobes arch_remove_kprobe(struct kprobe *p) { - down(&kprobe_mutex); + mutex_lock(&kprobe_mutex); free_insn_slot(p->ainsn.insn); - up(&kprobe_mutex); + mutex_unlock(&kprobe_mutex); } static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) diff --git a/arch/x86_64/kernel/kprobes.c b/arch/x86_64/kernel/kprobes.c index 8b866a8572c..14f0ced613b 100644 --- a/arch/x86_64/kernel/kprobes.c +++ b/arch/x86_64/kernel/kprobes.c @@ -222,9 +222,9 @@ void __kprobes arch_disarm_kprobe(struct kprobe *p) void __kprobes arch_remove_kprobe(struct kprobe *p) { - down(&kprobe_mutex); + mutex_lock(&kprobe_mutex); free_insn_slot(p->ainsn.insn); - up(&kprobe_mutex); + mutex_unlock(&kprobe_mutex); } static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb) -- cgit v1.2.3-18-g5258 From 91368d73e4b60d577ad171e5bd315b564265fcdb Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 23 Mar 2006 03:00:54 -0800 Subject: [PATCH] make bug messages more consistent Consolidate all kernel bug printouts to begin with the "BUG: " string. Makes it easier to find them in large bootup logs. Signed-off-by: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/nmi.c | 2 +- arch/i386/mm/fault.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/nmi.c b/arch/i386/kernel/nmi.c index be87c5e2ee9..1db34effdd8 100644 --- a/arch/i386/kernel/nmi.c +++ b/arch/i386/kernel/nmi.c @@ -543,7 +543,7 @@ void nmi_watchdog_tick (struct pt_regs * regs) /* * die_nmi will return ONLY if NOTIFY_STOP happens.. */ - die_nmi(regs, "NMI Watchdog detected LOCKUP"); + die_nmi(regs, "BUG: NMI Watchdog detected LOCKUP"); } else { last_irq_sums[cpu] = sum; alert_counter[cpu] = 0; diff --git a/arch/i386/mm/fault.c b/arch/i386/mm/fault.c index bbb24af5d86..47a3b72ec7b 100644 --- a/arch/i386/mm/fault.c +++ b/arch/i386/mm/fault.c @@ -518,9 +518,9 @@ no_context: } #endif if (address < PAGE_SIZE) - printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference"); + printk(KERN_ALERT "BUG: unable to handle kernel NULL pointer dereference"); else - printk(KERN_ALERT "Unable to handle kernel paging request"); + printk(KERN_ALERT "BUG: unable to handle kernel paging request"); printk(" at virtual address %08lx\n",address); printk(KERN_ALERT " printing eip:\n"); printk("%08lx\n", regs->eip); -- cgit v1.2.3-18-g5258 From 41c28ff1635e71af072c4711ff5fadd5855d48e7 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Thu, 23 Mar 2006 03:00:56 -0800 Subject: [PATCH] kill _INLINE_ This patch removes all occurances of _INLINE_ in the kernel. With the exception of tty_flip.h, I've simply removed the inline's since gcc should know best which functions to be inlined. Signed-off-by: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ia64/hp/sim/simserial.c | 7 +------ arch/xtensa/platform-iss/console.c | 4 ---- 2 files changed, 1 insertion(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c index 626cdc83668..0e5c6ae5022 100644 --- a/arch/ia64/hp/sim/simserial.c +++ b/arch/ia64/hp/sim/simserial.c @@ -46,11 +46,6 @@ #define KEYBOARD_INTR 3 /* must match with simulator! */ #define NR_PORTS 1 /* only one port for now */ -#define SERIAL_INLINE 1 - -#ifdef SERIAL_INLINE -#define _INLINE_ inline -#endif #define IRQ_T(info) ((info->flags & ASYNC_SHARE_IRQ) ? SA_SHIRQ : SA_INTERRUPT) @@ -237,7 +232,7 @@ static void rs_put_char(struct tty_struct *tty, unsigned char ch) local_irq_restore(flags); } -static _INLINE_ void transmit_chars(struct async_struct *info, int *intr_done) +static void transmit_chars(struct async_struct *info, int *intr_done) { int count; unsigned long flags; diff --git a/arch/xtensa/platform-iss/console.c b/arch/xtensa/platform-iss/console.c index 94fdfe474ac..2a580efb58e 100644 --- a/arch/xtensa/platform-iss/console.c +++ b/arch/xtensa/platform-iss/console.c @@ -31,10 +31,6 @@ #include #include -#ifdef SERIAL_INLINE -#define _INLINE_ inline -#endif - #define SERIAL_MAX_NUM_LINES 1 #define SERIAL_TIMER_VALUE (20 * HZ) -- cgit v1.2.3-18-g5258 From dd287796d608fcdc3fe5e8fdb5bf762a8f1bc32a Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 23 Mar 2006 03:00:57 -0800 Subject: [PATCH] pause_on_oops command line option Attempt to fix the problem wherein people's oops reports scroll off the screen due to repeated oopsing or to oopses on other CPUs. If this happens the user can reboot with the `pause_on_oops=' option. It will allow the first oopsing CPU to print an oops record just a single time. Second oopsing attempts, or oopses on other CPUs will cause those CPUs to enter a tight loop until the specified number of seconds have elapsed. The patch implements the infrastructure generically in the expectation that architectures other than x86 will find it useful. Cc: Dave Jones Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/traps.c | 3 +++ arch/i386/mm/fault.c | 39 +++++++++++++++++++++++---------------- 2 files changed, 26 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c index 1b7ad4115d8..de5386b01d3 100644 --- a/arch/i386/kernel/traps.c +++ b/arch/i386/kernel/traps.c @@ -352,6 +352,8 @@ void die(const char * str, struct pt_regs * regs, long err) static int die_counter; unsigned long flags; + oops_enter(); + if (die.lock_owner != raw_smp_processor_id()) { console_verbose(); spin_lock_irqsave(&die.lock, flags); @@ -404,6 +406,7 @@ void die(const char * str, struct pt_regs * regs, long err) ssleep(5); panic("Fatal exception"); } + oops_exit(); do_exit(SIGSEGV); } diff --git a/arch/i386/mm/fault.c b/arch/i386/mm/fault.c index 47a3b72ec7b..7f0fcf219a2 100644 --- a/arch/i386/mm/fault.c +++ b/arch/i386/mm/fault.c @@ -509,24 +509,31 @@ no_context: bust_spinlocks(1); -#ifdef CONFIG_X86_PAE - if (error_code & 16) { - pte_t *pte = lookup_address(address); - - if (pte && pte_present(*pte) && !pte_exec_kernel(*pte)) - printk(KERN_CRIT "kernel tried to execute NX-protected page - exploit attempt? (uid: %d)\n", current->uid); + if (oops_may_print()) { + #ifdef CONFIG_X86_PAE + if (error_code & 16) { + pte_t *pte = lookup_address(address); + + if (pte && pte_present(*pte) && !pte_exec_kernel(*pte)) + printk(KERN_CRIT "kernel tried to execute " + "NX-protected page - exploit attempt? " + "(uid: %d)\n", current->uid); + } + #endif + if (address < PAGE_SIZE) + printk(KERN_ALERT "BUG: unable to handle kernel NULL " + "pointer dereference"); + else + printk(KERN_ALERT "BUG: unable to handle kernel paging" + " request"); + printk(" at virtual address %08lx\n",address); + printk(KERN_ALERT " printing eip:\n"); + printk("%08lx\n", regs->eip); } -#endif - if (address < PAGE_SIZE) - printk(KERN_ALERT "BUG: unable to handle kernel NULL pointer dereference"); - else - printk(KERN_ALERT "BUG: unable to handle kernel paging request"); - printk(" at virtual address %08lx\n",address); - printk(KERN_ALERT " printing eip:\n"); - printk("%08lx\n", regs->eip); page = read_cr3(); page = ((unsigned long *) __va(page))[address >> 22]; - printk(KERN_ALERT "*pde = %08lx\n", page); + if (oops_may_print()) + printk(KERN_ALERT "*pde = %08lx\n", page); /* * We must not directly access the pte in the highpte * case, the page table might be allocated in highmem. @@ -534,7 +541,7 @@ no_context: * it's allocated already. */ #ifndef CONFIG_HIGHPTE - if (page & 1) { + if ((page & 1) && oops_may_print()) { page &= PAGE_MASK; address &= 0x003ff000; page = ((unsigned long *) __va(page))[address >> PAGE_SHIFT]; -- cgit v1.2.3-18-g5258 From 394e3902c55e667945f6f1c2bdbc59842cce70f7 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 23 Mar 2006 03:01:05 -0800 Subject: [PATCH] more for_each_cpu() conversions When we stop allocating percpu memory for not-possible CPUs we must not touch the percpu data for not-possible CPUs at all. The correct way of doing this is to test cpu_possible() or to use for_each_cpu(). This patch is a kernel-wide sweep of all instances of NR_CPUS. I found very few instances of this bug, if any. But the patch converts lots of open-coded test to use the preferred helper macros. Cc: Mikael Starvik Cc: David Howells Acked-by: Kyle McMartin Cc: Anton Blanchard Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Martin Schwidefsky Cc: Heiko Carstens Cc: Paul Mundt Cc: "David S. Miller" Cc: William Lee Irwin III Cc: Andi Kleen Cc: Christian Zankel Cc: Philippe Elie Cc: Nathan Scott Cc: Jens Axboe Cc: Eric Dumazet Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/cris/kernel/irq.c | 10 ++++------ arch/frv/kernel/irq.c | 10 ++++------ arch/i386/kernel/cpu/cpufreq/powernow-k8.c | 4 +--- arch/i386/kernel/io_apic.c | 22 +++++++++------------- arch/i386/kernel/nmi.c | 4 ++-- arch/i386/oprofile/nmi_int.c | 7 ++----- arch/m32r/kernel/irq.c | 10 ++++------ arch/mips/kernel/irq.c | 10 ++++------ arch/mips/kernel/smp.c | 4 ++-- arch/mips/sgi-ip27/ip27-irq.c | 5 +---- arch/parisc/kernel/smp.c | 25 ++++++++++--------------- arch/powerpc/kernel/irq.c | 5 ++--- arch/powerpc/kernel/setup-common.c | 5 ++--- arch/powerpc/kernel/setup_32.c | 5 ++--- arch/powerpc/platforms/powermac/smp.c | 4 +--- arch/ppc/kernel/setup.c | 10 ++++------ arch/s390/kernel/smp.c | 4 +--- arch/sh/kernel/irq.c | 5 ++--- arch/sh/kernel/setup.c | 5 ++--- arch/sh64/kernel/irq.c | 5 ++--- arch/sparc/kernel/irq.c | 5 ++--- arch/sparc/kernel/smp.c | 24 ++++++++++-------------- arch/sparc/kernel/sun4d_irq.c | 8 +++----- arch/sparc/kernel/sun4d_smp.c | 8 +++----- arch/sparc/kernel/sun4m_smp.c | 6 ++---- arch/sparc64/kernel/irq.c | 4 +--- arch/sparc64/kernel/smp.c | 30 ++++++++++++------------------ arch/x86_64/kernel/irq.c | 21 ++++++++------------- arch/x86_64/kernel/nmi.c | 4 +--- arch/xtensa/kernel/irq.c | 15 ++++++--------- 30 files changed, 109 insertions(+), 175 deletions(-) (limited to 'arch') diff --git a/arch/cris/kernel/irq.c b/arch/cris/kernel/irq.c index 30deaf1b728..b504def3e34 100644 --- a/arch/cris/kernel/irq.c +++ b/arch/cris/kernel/irq.c @@ -52,9 +52,8 @@ int show_interrupts(struct seq_file *p, void *v) if (i == 0) { seq_printf(p, " "); - for (j=0; jtypename); seq_printf(p, " %s", action->name); diff --git a/arch/frv/kernel/irq.c b/arch/frv/kernel/irq.c index 27ab4c30aac..11fa326a8f6 100644 --- a/arch/frv/kernel/irq.c +++ b/arch/frv/kernel/irq.c @@ -75,9 +75,8 @@ int show_interrupts(struct seq_file *p, void *v) switch (i) { case 0: seq_printf(p, " "); - for (j = 0; j < NR_CPUS; j++) - if (cpu_online(j)) - seq_printf(p, "CPU%d ",j); + for_each_online_cpu(j) + seq_printf(p, "CPU%d ",j); seq_putc(p, '\n'); break; @@ -100,9 +99,8 @@ int show_interrupts(struct seq_file *p, void *v) #ifndef CONFIG_SMP seq_printf(p, "%10u ", kstat_irqs(i)); #else - for (j = 0; j < NR_CPUS; j++) - if (cpu_online(j)) - seq_printf(p, "%10u ", kstat_cpu(j).irqs[i - 1]); + for_each_online_cpu(j) + seq_printf(p, "%10u ", kstat_cpu(j).irqs[i - 1]); #endif level = group->sources[ix]->level - frv_irq_levels; diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c index e11a09207ec..3d5110b65cc 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c @@ -1145,9 +1145,7 @@ static int __cpuinit powernowk8_init(void) { unsigned int i, supported_cpus = 0; - for (i=0; i CPU_IRQ(i)) { @@ -441,9 +439,7 @@ tryanothercpu: */ tmp_cpu_irq = 0; tmp_loaded = -1; - for (i = 0; i < NR_CPUS; i++) { - if (!cpu_online(i)) - continue; + for_each_online_cpu(i) { if (i != CPU_TO_PACKAGEINDEX(i)) continue; if (max_cpu_irq <= CPU_IRQ(i)) @@ -619,9 +615,7 @@ static int __init balanced_irq_init(void) if (smp_num_siblings > 1 && !cpus_empty(tmp)) physical_balance = 1; - for (i = 0; i < NR_CPUS; i++) { - if (!cpu_online(i)) - continue; + for_each_online_cpu(i) { irq_cpu_data[i].irq_delta = kmalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL); irq_cpu_data[i].last_irq = kmalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL); if (irq_cpu_data[i].irq_delta == NULL || irq_cpu_data[i].last_irq == NULL) { @@ -638,9 +632,11 @@ static int __init balanced_irq_init(void) else printk(KERN_ERR "balanced_irq_init: failed to spawn balanced_irq"); failed: - for (i = 0; i < NR_CPUS; i++) { + for_each_cpu(i) { kfree(irq_cpu_data[i].irq_delta); + irq_cpu_data[i].irq_delta = NULL; kfree(irq_cpu_data[i].last_irq); + irq_cpu_data[i].last_irq = NULL; } return 0; } diff --git a/arch/i386/kernel/nmi.c b/arch/i386/kernel/nmi.c index 1db34effdd8..9074818b947 100644 --- a/arch/i386/kernel/nmi.c +++ b/arch/i386/kernel/nmi.c @@ -143,7 +143,7 @@ static int __init check_nmi_watchdog(void) local_irq_enable(); mdelay((10*1000)/nmi_hz); // wait 10 ticks - for (cpu = 0; cpu < NR_CPUS; cpu++) { + for_each_cpu(cpu) { #ifdef CONFIG_SMP /* Check cpu_callin_map here because that is set after the timer is started. */ @@ -510,7 +510,7 @@ void touch_nmi_watchdog (void) * Just reset the alert counters, (other CPUs might be * spinning on locks we hold): */ - for (i = 0; i < NR_CPUS; i++) + for_each_cpu(i) alert_counter[i] = 0; /* diff --git a/arch/i386/oprofile/nmi_int.c b/arch/i386/oprofile/nmi_int.c index 0493e8b8ec4..1accce50c2c 100644 --- a/arch/i386/oprofile/nmi_int.c +++ b/arch/i386/oprofile/nmi_int.c @@ -122,7 +122,7 @@ static void nmi_save_registers(void * dummy) static void free_msrs(void) { int i; - for (i = 0; i < NR_CPUS; ++i) { + for_each_cpu(i) { kfree(cpu_msrs[i].counters); cpu_msrs[i].counters = NULL; kfree(cpu_msrs[i].controls); @@ -138,10 +138,7 @@ static int allocate_msrs(void) size_t counters_size = sizeof(struct op_msr) * model->num_counters; int i; - for (i = 0; i < NR_CPUS; ++i) { - if (!cpu_online(i)) - continue; - + for_each_online_cpu(i) { cpu_msrs[i].counters = kmalloc(counters_size, GFP_KERNEL); if (!cpu_msrs[i].counters) { success = 0; diff --git a/arch/m32r/kernel/irq.c b/arch/m32r/kernel/irq.c index 1ce63926a3c..a4634b06f67 100644 --- a/arch/m32r/kernel/irq.c +++ b/arch/m32r/kernel/irq.c @@ -37,9 +37,8 @@ int show_interrupts(struct seq_file *p, void *v) if (i == 0) { seq_printf(p, " "); - for (j=0; jtypename); seq_printf(p, " %s", action->name); diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c index 7d93992e462..3dd76b3d296 100644 --- a/arch/mips/kernel/irq.c +++ b/arch/mips/kernel/irq.c @@ -68,9 +68,8 @@ int show_interrupts(struct seq_file *p, void *v) if (i == 0) { seq_printf(p, " "); - for (j=0; jtypename); seq_printf(p, " %s", action->name); diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index 06ed9075242..78d171bfa33 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -167,8 +167,8 @@ int smp_call_function (void (*func) (void *info), void *info, int retry, mb(); /* Send a message to all other CPUs and wait for them to respond */ - for (i = 0; i < NR_CPUS; i++) - if (cpu_online(i) && i != cpu) + for_each_online_cpu(i) + if (i != cpu) core_send_ipi(i, SMP_CALL_FUNCTION); /* Wait for response */ diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c index 73e5e52781d..2854ac4c9be 100644 --- a/arch/mips/sgi-ip27/ip27-irq.c +++ b/arch/mips/sgi-ip27/ip27-irq.c @@ -88,12 +88,9 @@ static inline int find_level(cpuid_t *cpunum, int irq) { int cpu, i; - for (cpu = 0; cpu <= NR_CPUS; cpu++) { + for_each_online_cpu(cpu) { struct slice_data *si = cpu_data[cpu].data; - if (!cpu_online(cpu)) - continue; - for (i = BASE_PCI_IRQ; i < LEVELS_PER_SLICE; i++) if (si->level_to_irq[i] == irq) { *cpunum = cpu; diff --git a/arch/parisc/kernel/smp.c b/arch/parisc/kernel/smp.c index 25564b7ca6b..d6ac1c60a47 100644 --- a/arch/parisc/kernel/smp.c +++ b/arch/parisc/kernel/smp.c @@ -298,8 +298,8 @@ send_IPI_allbutself(enum ipi_message_type op) { int i; - for (i = 0; i < NR_CPUS; i++) { - if (cpu_online(i) && i != smp_processor_id()) + for_each_online_cpu(i) { + if (i != smp_processor_id()) send_IPI_single(i, op); } } @@ -643,14 +643,13 @@ int sys_cpus(int argc, char **argv) if ( argc == 1 ){ #ifdef DUMP_MORE_STATE - for(i=0; iflags & SA_INTERRUPT) ? '+' : ' ', diff --git a/arch/sparc/kernel/sun4d_smp.c b/arch/sparc/kernel/sun4d_smp.c index 4219dd2ce3a..41bb9596be4 100644 --- a/arch/sparc/kernel/sun4d_smp.c +++ b/arch/sparc/kernel/sun4d_smp.c @@ -249,11 +249,9 @@ void __init smp4d_boot_cpus(void) } else { unsigned long bogosum = 0; - for(i = 0; i < NR_CPUS; i++) { - if (cpu_isset(i, cpu_present_map)) { - bogosum += cpu_data(i).udelay_val; - smp_highest_cpu = i; - } + for_each_present_cpu(i) { + bogosum += cpu_data(i).udelay_val; + smp_highest_cpu = i; } SMP_PRINTK(("Total of %d Processors activated (%lu.%02lu BogoMIPS).\n", cpucount + 1, bogosum/(500000/HZ), (bogosum/(5000/HZ))%100)); printk("Total of %d Processors activated (%lu.%02lu BogoMIPS).\n", diff --git a/arch/sparc/kernel/sun4m_smp.c b/arch/sparc/kernel/sun4m_smp.c index fbbd8a474c4..1dde312eebd 100644 --- a/arch/sparc/kernel/sun4m_smp.c +++ b/arch/sparc/kernel/sun4m_smp.c @@ -218,10 +218,8 @@ void __init smp4m_boot_cpus(void) cpu_present_map = cpumask_of_cpu(smp_processor_id()); } else { unsigned long bogosum = 0; - for(i = 0; i < NR_CPUS; i++) { - if (cpu_isset(i, cpu_present_map)) - bogosum += cpu_data(i).udelay_val; - } + for_each_present_cpu(i) + bogosum += cpu_data(i).udelay_val; printk("Total of %d Processors activated (%lu.%02lu BogoMIPS).\n", cpucount + 1, bogosum/(500000/HZ), diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index 8c93ba655b3..e505a4125e3 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -117,9 +117,7 @@ int show_interrupts(struct seq_file *p, void *v) #ifndef CONFIG_SMP seq_printf(p, "%10u ", kstat_irqs(i)); #else - for (j = 0; j < NR_CPUS; j++) { - if (!cpu_online(j)) - continue; + for_each_online_cpu(j) { seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); } diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 373a701c90a..1b6e2ade100 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -57,25 +57,21 @@ void smp_info(struct seq_file *m) int i; seq_printf(m, "State:\n"); - for (i = 0; i < NR_CPUS; i++) { - if (cpu_online(i)) - seq_printf(m, - "CPU%d:\t\tonline\n", i); - } + for_each_online_cpu(i) + seq_printf(m, "CPU%d:\t\tonline\n", i); } void smp_bogo(struct seq_file *m) { int i; - for (i = 0; i < NR_CPUS; i++) - if (cpu_online(i)) - seq_printf(m, - "Cpu%dBogo\t: %lu.%02lu\n" - "Cpu%dClkTck\t: %016lx\n", - i, cpu_data(i).udelay_val / (500000/HZ), - (cpu_data(i).udelay_val / (5000/HZ)) % 100, - i, cpu_data(i).clock_tick); + for_each_online_cpu(i) + seq_printf(m, + "Cpu%dBogo\t: %lu.%02lu\n" + "Cpu%dClkTck\t: %016lx\n", + i, cpu_data(i).udelay_val / (500000/HZ), + (cpu_data(i).udelay_val / (5000/HZ)) % 100, + i, cpu_data(i).clock_tick); } void __init smp_store_cpu_info(int id) @@ -1282,7 +1278,7 @@ int setup_profiling_timer(unsigned int multiplier) return -EINVAL; spin_lock_irqsave(&prof_setup_lock, flags); - for (i = 0; i < NR_CPUS; i++) + for_each_cpu(i) prof_multiplier(i) = multiplier; current_tick_offset = (timer_tick_offset / multiplier); spin_unlock_irqrestore(&prof_setup_lock, flags); @@ -1384,10 +1380,8 @@ void __init smp_cpus_done(unsigned int max_cpus) unsigned long bogosum = 0; int i; - for (i = 0; i < NR_CPUS; i++) { - if (cpu_online(i)) - bogosum += cpu_data(i).udelay_val; - } + for_each_online_cpu(i) + bogosum += cpu_data(i).udelay_val; printk("Total of %ld processors activated " "(%lu.%02lu BogoMIPS).\n", (long) num_online_cpus(), diff --git a/arch/x86_64/kernel/irq.c b/arch/x86_64/kernel/irq.c index 30d2a1e545f..d8bd0b345b1 100644 --- a/arch/x86_64/kernel/irq.c +++ b/arch/x86_64/kernel/irq.c @@ -38,9 +38,8 @@ int show_interrupts(struct seq_file *p, void *v) if (i == 0) { seq_printf(p, " "); - for (j=0; jtypename); @@ -68,15 +65,13 @@ skip: spin_unlock_irqrestore(&irq_desc[i].lock, flags); } else if (i == NR_IRQS) { seq_printf(p, "NMI: "); - for (j = 0; j < NR_CPUS; j++) - if (cpu_online(j)) - seq_printf(p, "%10u ", cpu_pda(j)->__nmi_count); + for_each_online_cpu(j) + seq_printf(p, "%10u ", cpu_pda(j)->__nmi_count); seq_putc(p, '\n'); #ifdef CONFIG_X86_LOCAL_APIC seq_printf(p, "LOC: "); - for (j = 0; j < NR_CPUS; j++) - if (cpu_online(j)) - seq_printf(p, "%10u ", cpu_pda(j)->apic_timer_irqs); + for_each_online_cpu(j) + seq_printf(p, "%10u ", cpu_pda(j)->apic_timer_irqs); seq_putc(p, '\n'); #endif seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count)); diff --git a/arch/x86_64/kernel/nmi.c b/arch/x86_64/kernel/nmi.c index 5bf17e41cd2..66c009e10ba 100644 --- a/arch/x86_64/kernel/nmi.c +++ b/arch/x86_64/kernel/nmi.c @@ -162,9 +162,7 @@ int __init check_nmi_watchdog (void) local_irq_enable(); mdelay((10*1000)/nmi_hz); // wait 10 ticks - for (cpu = 0; cpu < NR_CPUS; cpu++) { - if (!cpu_online(cpu)) - continue; + for_each_online_cpu(cpu) { if (cpu_pda(cpu)->__nmi_count - counts[cpu] <= 5) { endflag = 1; printk("CPU#%d: NMI appears to be stuck (%d->%d)!\n", diff --git a/arch/xtensa/kernel/irq.c b/arch/xtensa/kernel/irq.c index 4cbf6d91571..51f9bed455f 100644 --- a/arch/xtensa/kernel/irq.c +++ b/arch/xtensa/kernel/irq.c @@ -83,9 +83,8 @@ int show_interrupts(struct seq_file *p, void *v) if (i == 0) { seq_printf(p, " "); - for (j=0; jtypename); seq_printf(p, " %s", action->name); @@ -113,9 +111,8 @@ skip: spin_unlock_irqrestore(&irq_desc[i].lock, flags); } else if (i == NR_IRQS) { seq_printf(p, "NMI: "); - for (j = 0; j < NR_CPUS; j++) - if (cpu_online(j)) - seq_printf(p, "%10u ", nmi_count(j)); + for_each_online_cpu(j) + seq_printf(p, "%10u ", nmi_count(j)); seq_putc(p, '\n'); seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count)); } -- cgit v1.2.3-18-g5258 From 9c42954dfd50d02963cd453fb84bfef3967af2f0 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 23 Mar 2006 16:59:37 +0000 Subject: [ARM] Move enable_irq and disable_irq to assembler.h 5d25ac038a317d454a4321cba955f756400835a5 broke VFP builds due to enable_irq not being defined as an assembly macro. Move it to assembler.h so everyone can use it. Signed-off-by: Russell King --- arch/arm/kernel/entry-header.S | 18 ------------------ arch/arm/vfp/entry.S | 1 + 2 files changed, 1 insertion(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S index 55c99cdab7d..f1c2fd5b63e 100644 --- a/arch/arm/kernel/entry-header.S +++ b/arch/arm/kernel/entry-header.S @@ -37,24 +37,6 @@ #endif .endm -#if __LINUX_ARM_ARCH__ >= 6 - .macro disable_irq - cpsid i - .endm - - .macro enable_irq - cpsie i - .endm -#else - .macro disable_irq - msr cpsr_c, #PSR_I_BIT | SVC_MODE - .endm - - .macro enable_irq - msr cpsr_c, #SVC_MODE - .endm -#endif - .macro get_thread_info, rd mov \rd, sp, lsr #13 mov \rd, \rd, lsl #13 diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S index 9ab1abfbe7a..7b595547c1c 100644 --- a/arch/arm/vfp/entry.S +++ b/arch/arm/vfp/entry.S @@ -18,6 +18,7 @@ #include #include #include +#include #include .globl do_vfp -- cgit v1.2.3-18-g5258 From a5b00bb4fe60796c791238cf5653b82110031c93 Mon Sep 17 00:00:00 2001 From: Horms Date: Thu, 23 Mar 2006 14:27:12 -0800 Subject: IA64: Use early_parm to handle mvec_name and nomca I'm not sure of the worthiness of this idea, so please consider it an RFC. Its key merits are: * Reuse existing infrastructure * Greatly tightens up the parsing of nomca * Greatly simplifies the parsing of machvec Addition cleanup (moving setup_mvec() to machvec.c) by Ken Chen. Signed-Off-By: Horms Signed-Off-By: Tony Luck --- arch/ia64/kernel/machvec.c | 19 +++++++++++++++---- arch/ia64/kernel/setup.c | 36 ++++++++++++------------------------ 2 files changed, 27 insertions(+), 28 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/machvec.c b/arch/ia64/kernel/machvec.c index c3a04ee7f4f..4b0b71d5aef 100644 --- a/arch/ia64/kernel/machvec.c +++ b/arch/ia64/kernel/machvec.c @@ -14,7 +14,15 @@ struct ia64_machine_vector ia64_mv; EXPORT_SYMBOL(ia64_mv); -static struct ia64_machine_vector * +static __initdata const char *mvec_name; +static __init int setup_mvec(char *s) +{ + mvec_name = s; + return 0; +} +early_param("machvec", setup_mvec); + +static struct ia64_machine_vector * __init lookup_machvec (const char *name) { extern struct ia64_machine_vector machvec_start[]; @@ -33,10 +41,13 @@ machvec_init (const char *name) { struct ia64_machine_vector *mv; + if (!name) + name = mvec_name ? mvec_name : acpi_get_sysname(); mv = lookup_machvec(name); - if (!mv) { - panic("generic kernel failed to find machine vector for platform %s!", name); - } + if (!mv) + panic("generic kernel failed to find machine vector for" + " platform %s!", name); + ia64_mv = *mv; printk(KERN_INFO "booting generic kernel on platform %s\n", name); } diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index eb0793628b8..fc860778fa4 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -389,6 +389,14 @@ check_for_logical_procs (void) } #endif +static __initdata int nomca; +static __init int setup_nomca(char *s) +{ + nomca = 1; + return 0; +} +early_param("nomca", setup_nomca); + void __init setup_arch (char **cmdline_p) { @@ -402,35 +410,15 @@ setup_arch (char **cmdline_p) efi_init(); io_port_init(); + parse_early_param(); + #ifdef CONFIG_IA64_GENERIC - { - const char *mvec_name = strstr (*cmdline_p, "machvec="); - char str[64]; - - if (mvec_name) { - const char *end; - size_t len; - - mvec_name += 8; - end = strchr (mvec_name, ' '); - if (end) - len = end - mvec_name; - else - len = strlen (mvec_name); - len = min(len, sizeof (str) - 1); - strncpy (str, mvec_name, len); - str[len] = '\0'; - mvec_name = str; - } else - mvec_name = acpi_get_sysname(); - machvec_init(mvec_name); - } + machvec_init(NULL); #endif if (early_console_setup(*cmdline_p) == 0) mark_bsp_online(); - parse_early_param(); #ifdef CONFIG_ACPI /* Initialize the ACPI boot-time table parser */ acpi_table_init(); @@ -493,7 +481,7 @@ setup_arch (char **cmdline_p) #endif /* enable IA-64 Machine Check Abort Handling unless disabled */ - if (!strstr(saved_command_line, "nomca")) + if (!nomca) ia64_mca_init(); platform_setup(cmdline_p); -- cgit v1.2.3-18-g5258 From 92c05fc1a32e5ccef5e0e8201f32dcdab041524c Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Thu, 23 Mar 2006 14:35:12 -0800 Subject: [PATCH] PCI: Give PCI config access initialization a defined ordering I moved it to a separate function which is safer. This avoids problems with the linker reordering them and the less useful PCI config space access methods taking priority over the better ones. Fixes some problems with broken MMCONFIG Cc: Dave Hansen Signed-off-by: Andi Kleen Signed-off-by: Greg Kroah-Hartman --- arch/i386/pci/Makefile | 2 +- arch/i386/pci/direct.c | 15 +++++---------- arch/i386/pci/init.c | 25 +++++++++++++++++++++++++ arch/i386/pci/mmconfig.c | 11 +++-------- arch/i386/pci/pcbios.c | 4 +--- arch/i386/pci/pci.h | 3 +++ arch/x86_64/pci/Makefile | 3 ++- 7 files changed, 40 insertions(+), 23 deletions(-) create mode 100644 arch/i386/pci/init.c (limited to 'arch') diff --git a/arch/i386/pci/Makefile b/arch/i386/pci/Makefile index 5461d4d5ea1..62ad75c57e6 100644 --- a/arch/i386/pci/Makefile +++ b/arch/i386/pci/Makefile @@ -1,4 +1,4 @@ -obj-y := i386.o +obj-y := i386.o init.o obj-$(CONFIG_PCI_BIOS) += pcbios.o obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o direct.o diff --git a/arch/i386/pci/direct.c b/arch/i386/pci/direct.c index e3ac502bf2f..99012b93bd1 100644 --- a/arch/i386/pci/direct.c +++ b/arch/i386/pci/direct.c @@ -245,7 +245,7 @@ static int __init pci_check_type2(void) return works; } -static int __init pci_direct_init(void) +void __init pci_direct_init(void) { struct resource *region, *region2; @@ -258,16 +258,16 @@ static int __init pci_direct_init(void) if (pci_check_type1()) { printk(KERN_INFO "PCI: Using configuration type 1\n"); raw_pci_ops = &pci_direct_conf1; - return 0; + return; } release_resource(region); type2: if ((pci_probe & PCI_PROBE_CONF2) == 0) - goto out; + return; region = request_region(0xCF8, 4, "PCI conf2"); if (!region) - goto out; + return; region2 = request_region(0xC000, 0x1000, "PCI conf2"); if (!region2) goto fail2; @@ -275,15 +275,10 @@ static int __init pci_direct_init(void) if (pci_check_type2()) { printk(KERN_INFO "PCI: Using configuration type 2\n"); raw_pci_ops = &pci_direct_conf2; - return 0; + return; } release_resource(region2); fail2: release_resource(region); - - out: - return 0; } - -arch_initcall(pci_direct_init); diff --git a/arch/i386/pci/init.c b/arch/i386/pci/init.c new file mode 100644 index 00000000000..f9156d3ac72 --- /dev/null +++ b/arch/i386/pci/init.c @@ -0,0 +1,25 @@ +#include +#include +#include +#include "pci.h" + +/* arch_initcall has too random ordering, so call the initializers + in the right sequence from here. */ +static __init int pci_access_init(void) +{ +#ifdef CONFIG_PCI_MMCONFIG + pci_mmcfg_init(); +#endif + if (raw_pci_ops) + return 0; +#ifdef CONFIG_PCI_BIOS + pci_pcbios_init(); +#endif + if (raw_pci_ops) + return 0; +#ifdef CONFIG_PCI_DIRECT + pci_direct_init(); +#endif + return 0; +} +arch_initcall(pci_access_init); diff --git a/arch/i386/pci/mmconfig.c b/arch/i386/pci/mmconfig.c index 0ee8a983708..613789071f3 100644 --- a/arch/i386/pci/mmconfig.c +++ b/arch/i386/pci/mmconfig.c @@ -172,25 +172,20 @@ static __init void unreachable_devices(void) } } -static int __init pci_mmcfg_init(void) +void __init pci_mmcfg_init(void) { if ((pci_probe & PCI_PROBE_MMCONF) == 0) - goto out; + return; acpi_table_parse(ACPI_MCFG, acpi_parse_mcfg); if ((pci_mmcfg_config_num == 0) || (pci_mmcfg_config == NULL) || (pci_mmcfg_config[0].base_address == 0)) - goto out; + return; printk(KERN_INFO "PCI: Using MMCONFIG\n"); raw_pci_ops = &pci_mmcfg; pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF; unreachable_devices(); - - out: - return 0; } - -arch_initcall(pci_mmcfg_init); diff --git a/arch/i386/pci/pcbios.c b/arch/i386/pci/pcbios.c index b9d65f0bc2d..1eec0868f4b 100644 --- a/arch/i386/pci/pcbios.c +++ b/arch/i386/pci/pcbios.c @@ -476,14 +476,12 @@ int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq) } EXPORT_SYMBOL(pcibios_set_irq_routing); -static int __init pci_pcbios_init(void) +void __init pci_pcbios_init(void) { if ((pci_probe & PCI_PROBE_BIOS) && ((raw_pci_ops = pci_find_bios()))) { pci_probe |= PCI_BIOS_SORT; pci_bios_present = 1; } - return 0; } -arch_initcall(pci_pcbios_init); diff --git a/arch/i386/pci/pci.h b/arch/i386/pci/pci.h index f550781ec31..12035e29108 100644 --- a/arch/i386/pci/pci.h +++ b/arch/i386/pci/pci.h @@ -80,4 +80,7 @@ extern int pci_conf1_write(unsigned int seg, unsigned int bus, extern int pci_conf1_read(unsigned int seg, unsigned int bus, unsigned int devfn, int reg, int len, u32 *value); +extern void pci_direct_init(void); +extern void pci_pcbios_init(void); +extern void pci_mmcfg_init(void); diff --git a/arch/x86_64/pci/Makefile b/arch/x86_64/pci/Makefile index a8f75a2a0f6..a3f6ad57017 100644 --- a/arch/x86_64/pci/Makefile +++ b/arch/x86_64/pci/Makefile @@ -7,7 +7,7 @@ CFLAGS += -Iarch/i386/pci obj-y := i386.o obj-$(CONFIG_PCI_DIRECT)+= direct.o -obj-y += fixup.o +obj-y += fixup.o init.o obj-$(CONFIG_ACPI) += acpi.o obj-y += legacy.o irq.o common.o # mmconfig has a 64bit special @@ -22,3 +22,4 @@ irq-y += ../../i386/pci/irq.o common-y += ../../i386/pci/common.o fixup-y += ../../i386/pci/fixup.o i386-y += ../../i386/pci/i386.o +init-y += ../../i386/pci/init.o -- cgit v1.2.3-18-g5258 From b408cbc704352eccee301e1103b23203ba1c3a0e Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 22 Feb 2006 15:50:30 -0800 Subject: [PATCH] PCI: resource address mismatch On Tue, 21 Feb 2006, Ivan Kokshaysky wrote: > There are two bogus entries in the BIOS memory map table which are > conflicting with a prefetchable memory range of the AGP bridge: > > BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) > BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > > 0000:00:02.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) (prog-if 00 [Normal decode]) > Flags: bus master, fast devsel, latency 0 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > I/O behind bridge: 0000c000-0000cfff > Memory behind bridge: e7e00000-e7efffff > Prefetchable memory behind bridge: fec00000-ffcfffff > ^^^^^^^^^^^^^^^^^ Yes. However, it's pretty clear that the e820 entries are there for a reason. Probably they are a hack by the BIOS maintainers to keep Windows from stomping/moving that region, exactly because they want to keep the bridge where it is (or, it's actually for the BIOS itself - the BIOS tables are a horrid mess, and BIOS engineers are pretty hacky people: they'll add random entries to make their own broken algorithms do the "right thing"). > Starting from 2.6.13, kernel tries to resolve that sort of conflicts, > so that prefetch window of the bridge and the framebuffer memory behind > it get moved to 0x10000000. I think we could (and probably should) solve this another way: consider the ACPI "reserved regions" from the e820 map exactly the same way that we do other ACPI hints - they should restrict _new_ allocations, but not impact stuff we figure out on our own. Basically, right now we assign _unassigned_ resources at "fs_initcall" time. If we were to add in the e820 "reserved region" stuff before that (but after we've done PCI discovery), we'd probably do the right thing. Right now we do the e820 reserved regions very early indeed: we call "register_memory()" from setup_arch(). We could move at least part of it (the part that registers the resources) down a bit. Here's a test-patch. I'm not saying we should absolutely do this, but it might be interesting to try... Cc: "Antonino A. Daplas" Cc: Ivan Kokshaysky Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- arch/i386/kernel/efi.c | 2 +- arch/i386/kernel/setup.c | 22 +++++++++++++++++----- 2 files changed, 18 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/efi.c b/arch/i386/kernel/efi.c index aeabb419686..7ec6cfa01fb 100644 --- a/arch/i386/kernel/efi.c +++ b/arch/i386/kernel/efi.c @@ -543,7 +543,7 @@ efi_initialize_iomem_resources(struct resource *code_resource, if ((md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT)) > 0x100000000ULL) continue; - res = alloc_bootmem_low(sizeof(struct resource)); + res = kzalloc(sizeof(struct resource), GFP_ATOMIC); switch (md->type) { case EFI_RESERVED_TYPE: res->name = "Reserved Memory"; diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c index 2d8782960f4..d313a11acaf 100644 --- a/arch/i386/kernel/setup.c +++ b/arch/i386/kernel/setup.c @@ -1288,7 +1288,7 @@ legacy_init_iomem_resources(struct resource *code_resource, struct resource *dat struct resource *res; if (e820.map[i].addr + e820.map[i].size > 0x100000000ULL) continue; - res = alloc_bootmem_low(sizeof(struct resource)); + res = kzalloc(sizeof(struct resource), GFP_ATOMIC); switch (e820.map[i].type) { case E820_RAM: res->name = "System RAM"; break; case E820_ACPI: res->name = "ACPI Tables"; break; @@ -1316,13 +1316,15 @@ legacy_init_iomem_resources(struct resource *code_resource, struct resource *dat /* * Request address space for all standard resources + * + * This is called just before pcibios_assign_resources(), which is also + * an fs_initcall, but is linked in later (in arch/i386/pci/i386.c). */ -static void __init register_memory(void) +static int __init request_standard_resources(void) { - unsigned long gapstart, gapsize, round; - unsigned long long last; - int i; + int i; + printk("Setting up standard PCI resources\n"); if (efi_enabled) efi_initialize_iomem_resources(&code_resource, &data_resource); else @@ -1334,6 +1336,16 @@ static void __init register_memory(void) /* request I/O space for devices used on all i[345]86 PCs */ for (i = 0; i < STANDARD_IO_RESOURCES; i++) request_resource(&ioport_resource, &standard_io_resources[i]); + return 0; +} + +fs_initcall(request_standard_resources); + +static void __init register_memory(void) +{ + unsigned long gapstart, gapsize, round; + unsigned long long last; + int i; /* * Search for the bigest gap in the low 32 bits of the e820 -- cgit v1.2.3-18-g5258 From 8c4b2cf9af9b4ecc29d4f0ec4ecc8e94dc4432d7 Mon Sep 17 00:00:00 2001 From: Bernhard Kaindl Date: Sat, 18 Feb 2006 01:36:55 -0800 Subject: [PATCH] PCI: PCI/Cardbus cards hidden, needs pci=assign-busses to fix "In some cases, especially on modern laptops with a lot of PCI and cardbus bridges, we're unable to assign correct secondary/subordinate bus numbers to all cardbus bridges due to BIOS limitations unless we are using "pci=assign-busses" boot option." -- Ivan Kokshaysky (from a patch comment) Without it, Cardbus cards inserted are never seen by PCI because the parent PCI-PCI Bridge of the Cardbus bridge will not pass and translate Type 1 PCI configuration cycles correctly and the system will fail to find and initialise the PCI devices in the system. Reference: PCI-PCI Bridges: PCI Configuration Cycles and PCI Bus Numbering: http://www.science.unitn.it/~fiorella/guidelinux/tlk/node72.html The reason for this is that: ``All PCI busses located behind a PCI-PCI bridge must reside between the secondary bus number and the subordinate bus number (inclusive).'' "pci=assign-busses" makes pcibios_assign_all_busses return 1 and this turns on PCI renumbering during PCI probing. Alan suggested to use DMI automatically set assign-busses on problem systems. The only question for me was where to put it. I put it directly before scanning PCI bus into pcibios_scan_root() because it's called from legacy, acpi and numa and so it can be one place for all systems and configurations which may need it. AMD64 Laptops are also affected and fixed by assign-busses, and the code is also incuded from arch/x86_64/pci/ that place will also work for x86_64 kernels, I only ifdef'-ed the x86-only Laptop in this example. Affected and known or assumed to be fixed with it are (found by googling): * ASUS Z71V and L3s * Samsung X20 * Compaq R3140us and all Compaq R3000 series laptops with TI1620 Controller, also Compaq R4000 series (from a kernel.org bugreport) * HP zv5000z (AMD64 3700+, known that fixup_parent_subordinate_busnr fixes it) * HP zv5200z * IBM ThinkPad 240 * An IBM ThinkPad (1.8 GHz Pentium M) debugged by Pavel Machek gives the correspondig message which detects the possible problem. * MSI S260 / Medion SIM 2100 MD 95600 The patch also expands the "try pci=assign-busses" warning so testers will help us to update the DMI table. Cc: Ivan Kokshaysky Cc: Alan Cox Cc: Dominik Brodowski Cc: Russell King Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- arch/i386/pci/common.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) (limited to 'arch') diff --git a/arch/i386/pci/common.c b/arch/i386/pci/common.c index f6bc48da4d2..dbece776c5b 100644 --- a/arch/i386/pci/common.c +++ b/arch/i386/pci/common.c @@ -8,6 +8,7 @@ #include #include #include +#include #include #include @@ -120,11 +121,42 @@ void __devinit pcibios_fixup_bus(struct pci_bus *b) pci_read_bridge_bases(b); } +/* + * Enable renumbering of PCI bus# ranges to reach all PCI busses (Cardbus) + */ +#ifdef __i386__ +static int __devinit assign_all_busses(struct dmi_system_id *d) +{ + pci_probe |= PCI_ASSIGN_ALL_BUSSES; + printk(KERN_INFO "%s detected: enabling PCI bus# renumbering" + " (pci=assign-busses)\n", d->ident); + return 0; +} +#endif + +/* + * Laptops which need pci=assign-busses to see Cardbus cards + */ +static struct dmi_system_id __devinitdata pciprobe_dmi_table[] = { +#ifdef __i386__ + { + .callback = assign_all_busses, + .ident = "Samsung X20 Laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Samsung Electronics"), + DMI_MATCH(DMI_PRODUCT_NAME, "SX20S"), + }, + }, +#endif /* __i386__ */ + {} +}; struct pci_bus * __devinit pcibios_scan_root(int busnum) { struct pci_bus *bus = NULL; + dmi_check_system(pciprobe_dmi_table); + while ((bus = pci_find_next_bus(bus)) != NULL) { if (bus->number == busnum) { /* Already scanned */ -- cgit v1.2.3-18-g5258 From a54123e27779049d27d21e6c8adfee73aa2c0734 Mon Sep 17 00:00:00 2001 From: Bob Breuer Date: Thu, 23 Mar 2006 22:36:19 -0800 Subject: [SPARC]: Try to start getting SMP back into shape. Todo items: - IRQ_INPROGRESS flag - use sparc64 irq buckets, or generic irq_desc? - sun4d - re-indent large chunks of sun4m_smp.c - some places assume sequential cpu numbering (i.e. 0,1 instead of 0,2) Last I checked (with 2.6.14), random programs segfault with dual HyperSPARC. And with SuperSPARC II's, it seems stable but will eventually die from a write lock error (wrong lock owner or something). I haven't tried the HyperSPARC + highmem combination recently, so that may still be a problem. Signed-off-by: David S. Miller --- arch/sparc/Kconfig | 1 - arch/sparc/kernel/irq.c | 66 ++++++++------- arch/sparc/kernel/smp.c | 84 ++++++++++++++----- arch/sparc/kernel/sparc_ksyms.c | 4 - arch/sparc/kernel/sun4d_irq.c | 2 +- arch/sparc/kernel/sun4d_smp.c | 8 +- arch/sparc/kernel/sun4m_smp.c | 181 +++++++++++++++++----------------------- arch/sparc/mm/srmmu.c | 6 ++ 8 files changed, 185 insertions(+), 167 deletions(-) (limited to 'arch') diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index f944b58cdfe..7c58fc1a39c 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -23,7 +23,6 @@ menu "General machine setup" config SMP bool "Symmetric multi-processing support (does not work on sun4/sun4c)" - depends on BROKEN ---help--- This enables support for systems with more than one CPU. If you have a system with only one CPU, say N. If you have a system with more diff --git a/arch/sparc/kernel/irq.c b/arch/sparc/kernel/irq.c index 4c60a6ef54a..aac8af5aae5 100644 --- a/arch/sparc/kernel/irq.c +++ b/arch/sparc/kernel/irq.c @@ -154,9 +154,11 @@ void (*sparc_init_timers)(irqreturn_t (*)(int, void *,struct pt_regs *)) = struct irqaction static_irqaction[MAX_STATIC_ALLOC]; int static_irq_count; -struct irqaction *irq_action[NR_IRQS] = { - [0 ... (NR_IRQS-1)] = NULL -}; +struct { + struct irqaction *action; + int flags; +} sparc_irq[NR_IRQS]; +#define SPARC_IRQ_INPROGRESS 1 /* Used to protect the IRQ action lists */ DEFINE_SPINLOCK(irq_action_lock); @@ -177,7 +179,7 @@ int show_interrupts(struct seq_file *p, void *v) } spin_lock_irqsave(&irq_action_lock, flags); if (i < NR_IRQS) { - action = *(i + irq_action); + action = sparc_irq[i].action; if (!action) goto out_unlock; seq_printf(p, "%3d: ", i); @@ -186,7 +188,7 @@ int show_interrupts(struct seq_file *p, void *v) #else for_each_online_cpu(j) { seq_printf(p, "%10u ", - kstat_cpu(cpu_logical_map(j)).irqs[i]); + kstat_cpu(j).irqs[i]); } #endif seq_printf(p, " %c %s", @@ -207,7 +209,7 @@ out_unlock: void free_irq(unsigned int irq, void *dev_id) { struct irqaction * action; - struct irqaction * tmp = NULL; + struct irqaction **actionp; unsigned long flags; unsigned int cpu_irq; @@ -225,7 +227,8 @@ void free_irq(unsigned int irq, void *dev_id) spin_lock_irqsave(&irq_action_lock, flags); - action = *(cpu_irq + irq_action); + actionp = &sparc_irq[cpu_irq].action; + action = *actionp; if (!action->handler) { printk("Trying to free free IRQ%d\n",irq); @@ -235,7 +238,7 @@ void free_irq(unsigned int irq, void *dev_id) for (; action; action = action->next) { if (action->dev_id == dev_id) break; - tmp = action; + actionp = &action->next; } if (!action) { printk("Trying to free free shared IRQ%d\n",irq); @@ -254,11 +257,8 @@ void free_irq(unsigned int irq, void *dev_id) irq, action->name); goto out_unlock; } - - if (action && tmp) - tmp->next = action->next; - else - *(cpu_irq + irq_action) = action->next; + + *actionp = action->next; spin_unlock_irqrestore(&irq_action_lock, flags); @@ -268,7 +268,7 @@ void free_irq(unsigned int irq, void *dev_id) kfree(action); - if (!(*(cpu_irq + irq_action))) + if (!sparc_irq[cpu_irq].action) disable_irq(irq); out_unlock: @@ -287,8 +287,11 @@ EXPORT_SYMBOL(free_irq); #ifdef CONFIG_SMP void synchronize_irq(unsigned int irq) { - printk("synchronize_irq says: implement me!\n"); - BUG(); + unsigned int cpu_irq; + + cpu_irq = irq & (NR_IRQS - 1); + while (sparc_irq[cpu_irq].flags & SPARC_IRQ_INPROGRESS) + cpu_relax(); } #endif /* SMP */ @@ -299,7 +302,7 @@ void unexpected_irq(int irq, void *dev_id, struct pt_regs * regs) unsigned int cpu_irq; cpu_irq = irq & (NR_IRQS - 1); - action = *(cpu_irq + irq_action); + action = sparc_irq[cpu_irq].action; printk("IO device interrupt, irq = %d\n", irq); printk("PC = %08lx NPC = %08lx FP=%08lx\n", regs->pc, @@ -330,7 +333,8 @@ void handler_irq(int irq, struct pt_regs * regs) if(irq < 10) smp4m_irq_rotate(cpu); #endif - action = *(irq + irq_action); + action = sparc_irq[irq].action; + sparc_irq[irq].flags |= SPARC_IRQ_INPROGRESS; kstat_cpu(cpu).irqs[irq]++; do { if (!action || !action->handler) @@ -338,6 +342,7 @@ void handler_irq(int irq, struct pt_regs * regs) action->handler(irq, action->dev_id, regs); action = action->next; } while (action); + sparc_irq[irq].flags &= ~SPARC_IRQ_INPROGRESS; enable_pil_irq(irq); irq_exit(); } @@ -389,7 +394,7 @@ int request_fast_irq(unsigned int irq, spin_lock_irqsave(&irq_action_lock, flags); - action = *(cpu_irq + irq_action); + action = sparc_irq[cpu_irq].action; if(action) { if(action->flags & SA_SHIRQ) panic("Trying to register fast irq when already shared.\n"); @@ -452,7 +457,7 @@ int request_fast_irq(unsigned int irq, action->dev_id = NULL; action->next = NULL; - *(cpu_irq + irq_action) = action; + sparc_irq[cpu_irq].action = action; enable_irq(irq); @@ -467,7 +472,7 @@ int request_irq(unsigned int irq, irqreturn_t (*handler)(int, void *, struct pt_regs *), unsigned long irqflags, const char * devname, void *dev_id) { - struct irqaction * action, *tmp = NULL; + struct irqaction * action, **actionp; unsigned long flags; unsigned int cpu_irq; int ret; @@ -490,20 +495,20 @@ int request_irq(unsigned int irq, spin_lock_irqsave(&irq_action_lock, flags); - action = *(cpu_irq + irq_action); + actionp = &sparc_irq[cpu_irq].action; + action = *actionp; if (action) { - if ((action->flags & SA_SHIRQ) && (irqflags & SA_SHIRQ)) { - for (tmp = action; tmp->next; tmp = tmp->next); - } else { + if (!(action->flags & SA_SHIRQ) || !(irqflags & SA_SHIRQ)) { ret = -EBUSY; goto out_unlock; } - if ((action->flags & SA_INTERRUPT) ^ (irqflags & SA_INTERRUPT)) { + if ((action->flags & SA_INTERRUPT) != (irqflags & SA_INTERRUPT)) { printk("Attempt to mix fast and slow interrupts on IRQ%d denied\n", irq); ret = -EBUSY; goto out_unlock; - } - action = NULL; /* Or else! */ + } + for ( ; action; action = *actionp) + actionp = &action->next; } /* If this is flagged as statically allocated then we use our @@ -532,10 +537,7 @@ int request_irq(unsigned int irq, action->next = NULL; action->dev_id = dev_id; - if (tmp) - tmp->next = action; - else - *(cpu_irq + irq_action) = action; + *actionp = action; enable_irq(irq); diff --git a/arch/sparc/kernel/smp.c b/arch/sparc/kernel/smp.c index ea5682ce703..2be81211519 100644 --- a/arch/sparc/kernel/smp.c +++ b/arch/sparc/kernel/smp.c @@ -45,6 +45,7 @@ volatile int __cpu_logical_map[NR_CPUS]; cpumask_t cpu_online_map = CPU_MASK_NONE; cpumask_t phys_cpu_present_map = CPU_MASK_NONE; +cpumask_t smp_commenced_mask = CPU_MASK_NONE; /* The only guaranteed locking primitive available on all Sparc * processors is 'ldstub [%reg + immediate], %dest_reg' which atomically @@ -57,11 +58,6 @@ cpumask_t phys_cpu_present_map = CPU_MASK_NONE; /* Used to make bitops atomic */ unsigned char bitops_spinlock = 0; -volatile unsigned long ipi_count; - -volatile int smp_process_available=0; -volatile int smp_commenced = 0; - void __init smp_store_cpu_info(int id) { int cpu_node; @@ -79,6 +75,22 @@ void __init smp_store_cpu_info(int id) void __init smp_cpus_done(unsigned int max_cpus) { + extern void smp4m_smp_done(void); + unsigned long bogosum = 0; + int cpu, num; + + for (cpu = 0, num = 0; cpu < NR_CPUS; cpu++) + if (cpu_online(cpu)) { + num++; + bogosum += cpu_data(cpu).udelay_val; + } + + printk("Total of %d processors activated (%lu.%02lu BogoMIPS).\n", + num, bogosum/(500000/HZ), + (bogosum/(5000/HZ))%100); + + BUG_ON(sparc_cpu_model != sun4m); + smp4m_smp_done(); } void cpu_panic(void) @@ -89,17 +101,6 @@ void cpu_panic(void) struct linux_prom_registers smp_penguin_ctable __initdata = { 0 }; -void __init smp_boot_cpus(void) -{ - extern void smp4m_boot_cpus(void); - extern void smp4d_boot_cpus(void); - - if (sparc_cpu_model == sun4m) - smp4m_boot_cpus(); - else - smp4d_boot_cpus(); -} - void smp_send_reschedule(int cpu) { /* See sparc64 */ @@ -252,20 +253,61 @@ int setup_profiling_timer(unsigned int multiplier) return 0; } -void __init smp_prepare_cpus(unsigned int maxcpus) +void __init smp_prepare_cpus(unsigned int max_cpus) { + extern void smp4m_boot_cpus(void); + int i, cpuid, ncpus, extra; + + BUG_ON(sparc_cpu_model != sun4m); + printk("Entering SMP Mode...\n"); + + ncpus = 1; + extra = 0; + for (i = 0; !cpu_find_by_instance(i, NULL, &cpuid); i++) { + if (cpuid == boot_cpu_id) + continue; + if (cpuid < NR_CPUS && ncpus++ < max_cpus) + cpu_set(cpuid, phys_cpu_present_map); + else + extra++; + } + if (max_cpus >= NR_CPUS && extra) + printk("Warning: NR_CPUS is too low to start all cpus\n"); + + smp_store_cpu_info(boot_cpu_id); + + smp4m_boot_cpus(); } void __devinit smp_prepare_boot_cpu(void) { - current_thread_info()->cpu = hard_smp_processor_id(); - cpu_set(smp_processor_id(), cpu_online_map); - cpu_set(smp_processor_id(), phys_cpu_present_map); + int cpuid = hard_smp_processor_id(); + + if (cpuid >= NR_CPUS) { + prom_printf("Serious problem, boot cpu id >= NR_CPUS\n"); + prom_halt(); + } + if (cpuid != 0) + printk("boot cpu id != 0, this could work but is untested\n"); + + current_thread_info()->cpu = cpuid; + cpu_set(cpuid, cpu_online_map); + cpu_set(cpuid, phys_cpu_present_map); } int __devinit __cpu_up(unsigned int cpu) { - panic("smp doesn't work\n"); + extern int smp4m_boot_one_cpu(int); + int ret; + + ret = smp4m_boot_one_cpu(cpu); + + if (!ret) { + cpu_set(cpu, smp_commenced_mask); + while (!cpu_online(cpu)) + mb(); + } + return ret; } void smp_bogo(struct seq_file *m) diff --git a/arch/sparc/kernel/sparc_ksyms.c b/arch/sparc/kernel/sparc_ksyms.c index 19b25399d7e..2c21d790763 100644 --- a/arch/sparc/kernel/sparc_ksyms.c +++ b/arch/sparc/kernel/sparc_ksyms.c @@ -136,10 +136,6 @@ EXPORT_PER_CPU_SYMBOL(__cpu_data); /* IRQ implementation. */ EXPORT_SYMBOL(synchronize_irq); -/* Misc SMP information */ -EXPORT_SYMBOL(__cpu_number_map); -EXPORT_SYMBOL(__cpu_logical_map); - /* CPU online map and active count. */ EXPORT_SYMBOL(cpu_online_map); EXPORT_SYMBOL(phys_cpu_present_map); diff --git a/arch/sparc/kernel/sun4d_irq.c b/arch/sparc/kernel/sun4d_irq.c index cea7fc6fc6e..ca656d9bd6f 100644 --- a/arch/sparc/kernel/sun4d_irq.c +++ b/arch/sparc/kernel/sun4d_irq.c @@ -54,7 +54,7 @@ unsigned char cpu_leds[32]; unsigned char sbus_tid[32]; #endif -extern struct irqaction *irq_action[]; +static struct irqaction *irq_action[NR_IRQS]; extern spinlock_t irq_action_lock; struct sbus_action { diff --git a/arch/sparc/kernel/sun4d_smp.c b/arch/sparc/kernel/sun4d_smp.c index 41bb9596be4..b141b7ee671 100644 --- a/arch/sparc/kernel/sun4d_smp.c +++ b/arch/sparc/kernel/sun4d_smp.c @@ -46,14 +46,16 @@ extern volatile int smp_processors_ready; extern int smp_num_cpus; static int smp_highest_cpu; extern volatile unsigned long cpu_callin_map[NR_CPUS]; -extern struct cpuinfo_sparc cpu_data[NR_CPUS]; +extern cpuinfo_sparc cpu_data[NR_CPUS]; extern unsigned char boot_cpu_id; extern int smp_activated; extern volatile int __cpu_number_map[NR_CPUS]; extern volatile int __cpu_logical_map[NR_CPUS]; extern volatile unsigned long ipi_count; extern volatile int smp_process_available; -extern volatile int smp_commenced; + +extern cpumask_t smp_commenced_mask; + extern int __smp4d_processor_id(void); /* #define SMP_DEBUG */ @@ -136,7 +138,7 @@ void __init smp4d_callin(void) local_irq_enable(); /* We don't allow PIL 14 yet */ - while(!smp_commenced) + while (!cpu_isset(cpuid, smp_commenced_mask)) barrier(); spin_lock_irqsave(&sun4d_imsk_lock, flags); diff --git a/arch/sparc/kernel/sun4m_smp.c b/arch/sparc/kernel/sun4m_smp.c index 1dde312eebd..70b375a4c2c 100644 --- a/arch/sparc/kernel/sun4m_smp.c +++ b/arch/sparc/kernel/sun4m_smp.c @@ -40,15 +40,11 @@ extern ctxd_t *srmmu_ctx_table_phys; extern void calibrate_delay(void); extern volatile int smp_processors_ready; -extern int smp_num_cpus; extern volatile unsigned long cpu_callin_map[NR_CPUS]; extern unsigned char boot_cpu_id; -extern int smp_activated; -extern volatile int __cpu_number_map[NR_CPUS]; -extern volatile int __cpu_logical_map[NR_CPUS]; -extern volatile unsigned long ipi_count; -extern volatile int smp_process_available; -extern volatile int smp_commenced; + +extern cpumask_t smp_commenced_mask; + extern int __smp4m_processor_id(void); /*#define SMP_DEBUG*/ @@ -77,8 +73,6 @@ void __init smp4m_callin(void) local_flush_cache_all(); local_flush_tlb_all(); - set_irq_udt(boot_cpu_id); - /* Get our local ticker going. */ smp_setup_percpu_timer(); @@ -95,8 +89,9 @@ void __init smp4m_callin(void) * to call the scheduler code. */ /* Allow master to continue. */ - swap((unsigned long *)&cpu_callin_map[cpuid], 1); + swap(&cpu_callin_map[cpuid], 1); + /* XXX: What's up with all the flushes? */ local_flush_cache_all(); local_flush_tlb_all(); @@ -111,13 +106,14 @@ void __init smp4m_callin(void) atomic_inc(&init_mm.mm_count); current->active_mm = &init_mm; - while(!smp_commenced) - barrier(); - - local_flush_cache_all(); - local_flush_tlb_all(); + while (!cpu_isset(cpuid, smp_commenced_mask)) + mb(); local_irq_enable(); + + cpu_set(cpuid, cpu_online_map); + /* last one in gets all the interrupts (for testing) */ + set_irq_udt(boot_cpu_id); } extern void init_IRQ(void); @@ -134,102 +130,76 @@ extern unsigned long trapbase_cpu3[]; void __init smp4m_boot_cpus(void) { - int cpucount = 0; - int i, mid; + smp_setup_percpu_timer(); + local_flush_cache_all(); +} - printk("Entering SMP Mode...\n"); +int smp4m_boot_one_cpu(int i) +{ + extern unsigned long sun4m_cpu_startup; + unsigned long *entry = &sun4m_cpu_startup; + struct task_struct *p; + int timeout; + int cpu_node; - local_irq_enable(); - cpus_clear(cpu_present_map); + cpu_find_by_mid(i, &cpu_node); + + /* Cook up an idler for this guy. */ + p = fork_idle(i); + current_set[i] = task_thread_info(p); + /* See trampoline.S for details... */ + entry += ((i-1) * 3); - for (i = 0; !cpu_find_by_instance(i, NULL, &mid); i++) - cpu_set(mid, cpu_present_map); + /* + * Initialize the contexts table + * Since the call to prom_startcpu() trashes the structure, + * we need to re-initialize it for each cpu + */ + smp_penguin_ctable.which_io = 0; + smp_penguin_ctable.phys_addr = (unsigned int) srmmu_ctx_table_phys; + smp_penguin_ctable.reg_size = 0; - for(i=0; i < NR_CPUS; i++) { - __cpu_number_map[i] = -1; - __cpu_logical_map[i] = -1; + /* whirrr, whirrr, whirrrrrrrrr... */ + printk("Starting CPU %d at %p\n", i, entry); + local_flush_cache_all(); + prom_startcpu(cpu_node, + &smp_penguin_ctable, 0, (char *)entry); + + /* wheee... it's going... */ + for(timeout = 0; timeout < 10000; timeout++) { + if(cpu_callin_map[i]) + break; + udelay(200); } - __cpu_number_map[boot_cpu_id] = 0; - __cpu_logical_map[0] = boot_cpu_id; - current_thread_info()->cpu = boot_cpu_id; + if (!(cpu_callin_map[i])) { + printk("Processor %d is stuck.\n", i); + return -ENODEV; + } - smp_store_cpu_info(boot_cpu_id); - set_irq_udt(boot_cpu_id); - smp_setup_percpu_timer(); local_flush_cache_all(); - if(cpu_find_by_instance(1, NULL, NULL)) - return; /* Not an MP box. */ - for(i = 0; i < NR_CPUS; i++) { - if(i == boot_cpu_id) - continue; - - if (cpu_isset(i, cpu_present_map)) { - extern unsigned long sun4m_cpu_startup; - unsigned long *entry = &sun4m_cpu_startup; - struct task_struct *p; - int timeout; - - /* Cook up an idler for this guy. */ - p = fork_idle(i); - cpucount++; - current_set[i] = task_thread_info(p); - /* See trampoline.S for details... */ - entry += ((i-1) * 3); - - /* - * Initialize the contexts table - * Since the call to prom_startcpu() trashes the structure, - * we need to re-initialize it for each cpu - */ - smp_penguin_ctable.which_io = 0; - smp_penguin_ctable.phys_addr = (unsigned int) srmmu_ctx_table_phys; - smp_penguin_ctable.reg_size = 0; - - /* whirrr, whirrr, whirrrrrrrrr... */ - printk("Starting CPU %d at %p\n", i, entry); - local_flush_cache_all(); - prom_startcpu(cpu_data(i).prom_node, - &smp_penguin_ctable, 0, (char *)entry); - - /* wheee... it's going... */ - for(timeout = 0; timeout < 10000; timeout++) { - if(cpu_callin_map[i]) - break; - udelay(200); - } - if(cpu_callin_map[i]) { - /* Another "Red Snapper". */ - __cpu_number_map[i] = i; - __cpu_logical_map[i] = i; - } else { - cpucount--; - printk("Processor %d is stuck.\n", i); - } - } - if(!(cpu_callin_map[i])) { - cpu_clear(i, cpu_present_map); - __cpu_number_map[i] = -1; + return 0; +} + +void __init smp4m_smp_done(void) +{ + int i, first; + int *prev; + + /* setup cpu list for irq rotation */ + first = 0; + prev = &first; + for (i = 0; i < NR_CPUS; i++) { + if (cpu_online(i)) { + *prev = i; + prev = &cpu_data(i).next; } } + *prev = first; local_flush_cache_all(); - if(cpucount == 0) { - printk("Error: only one Processor found.\n"); - cpu_present_map = cpumask_of_cpu(smp_processor_id()); - } else { - unsigned long bogosum = 0; - for_each_present_cpu(i) - bogosum += cpu_data(i).udelay_val; - printk("Total of %d Processors activated (%lu.%02lu BogoMIPS).\n", - cpucount + 1, - bogosum/(500000/HZ), - (bogosum/(5000/HZ))%100); - smp_activated = 1; - smp_num_cpus = cpucount + 1; - } /* Free unneeded trap tables */ - if (!cpu_isset(i, cpu_present_map)) { + if (!cpu_isset(1, cpu_present_map)) { ClearPageReserved(virt_to_page(trapbase_cpu1)); init_page_count(virt_to_page(trapbase_cpu1)); free_page((unsigned long)trapbase_cpu1); @@ -263,6 +233,9 @@ void __init smp4m_boot_cpus(void) */ void smp4m_irq_rotate(int cpu) { + int next = cpu_data(cpu).next; + if (next != cpu) + set_irq_udt(next); } /* Cross calls, in order to work efficiently and atomically do all @@ -289,7 +262,7 @@ void smp4m_message_pass(int target, int msg, unsigned long data, int wait) smp_cpu_in_msg[me]++; if(target == MSG_ALL_BUT_SELF || target == MSG_ALL) { - mask = cpu_present_map; + mask = cpu_online_map; if(target == MSG_ALL_BUT_SELF) cpu_clear(me, mask); for(i = 0; i < 4; i++) { @@ -314,8 +287,8 @@ static struct smp_funcall { unsigned long arg3; unsigned long arg4; unsigned long arg5; - unsigned long processors_in[NR_CPUS]; /* Set when ipi entered. */ - unsigned long processors_out[NR_CPUS]; /* Set when ipi exited. */ + unsigned long processors_in[SUN4M_NCPUS]; /* Set when ipi entered. */ + unsigned long processors_out[SUN4M_NCPUS]; /* Set when ipi exited. */ } ccall_info; static DEFINE_SPINLOCK(cross_call_lock); @@ -324,8 +297,7 @@ static DEFINE_SPINLOCK(cross_call_lock); void smp4m_cross_call(smpfunc_t func, unsigned long arg1, unsigned long arg2, unsigned long arg3, unsigned long arg4, unsigned long arg5) { - if(smp_processors_ready) { - register int ncpus = smp_num_cpus; + register int ncpus = SUN4M_NCPUS; unsigned long flags; spin_lock_irqsave(&cross_call_lock, flags); @@ -340,7 +312,7 @@ void smp4m_cross_call(smpfunc_t func, unsigned long arg1, unsigned long arg2, /* Init receive/complete mapping, plus fire the IPI's off. */ { - cpumask_t mask = cpu_present_map; + cpumask_t mask = cpu_online_map; register int i; cpu_clear(smp_processor_id(), mask); @@ -373,7 +345,6 @@ void smp4m_cross_call(smpfunc_t func, unsigned long arg1, unsigned long arg2, } spin_unlock_irqrestore(&cross_call_lock, flags); - } } /* Running cross calls. */ diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c index 27b0e0ba858..58c65cc8d0d 100644 --- a/arch/sparc/mm/srmmu.c +++ b/arch/sparc/mm/srmmu.c @@ -1302,7 +1302,12 @@ void __init srmmu_paging_init(void) flush_cache_all(); srmmu_set_ctable_ptr((unsigned long)srmmu_ctx_table_phys); +#ifdef CONFIG_SMP + /* Stop from hanging here... */ + local_flush_tlb_all(); +#else flush_tlb_all(); +#endif poke_srmmu(); #ifdef CONFIG_SUN_IO @@ -1419,6 +1424,7 @@ static void __init init_vac_layout(void) max_size = vac_cache_size; if(vac_line_size < min_line_size) min_line_size = vac_line_size; + //FIXME: cpus not contiguous!! cpu++; if (cpu >= NR_CPUS || !cpu_online(cpu)) break; -- cgit v1.2.3-18-g5258 From c76b6b41d0ae29e1127d9f81cb687cabda57c14c Mon Sep 17 00:00:00 2001 From: "Hyok S. Choi" Date: Fri, 24 Mar 2006 09:53:18 +0000 Subject: [ARM] nommu: rename compressed/head.S symbols to a new style This patch renames symbols to a new style to prepare mpu support code merging. e.g. __armv4_cache_on --> __armv4_mmu_cache_on Signed-off-by: Hyok S. Choi Signed-off-by: Russell King --- arch/arm/boot/compressed/head.S | 82 ++++++++++++++++++++--------------------- 1 file changed, 41 insertions(+), 41 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index db3389d8e02..491c7e4c9ac 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -358,7 +358,7 @@ __setup_mmu: sub r3, r4, #16384 @ Page directory size str r1, [r0] mov pc, lr -__armv4_cache_on: +__armv4_mmu_cache_on: mov r12, lr bl __setup_mmu mov r0, #0 @@ -367,24 +367,24 @@ __armv4_cache_on: mrc p15, 0, r0, c1, c0, 0 @ read control reg orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement orr r0, r0, #0x0030 - bl __common_cache_on + bl __common_mmu_cache_on mov r0, #0 mcr p15, 0, r0, c8, c7, 0 @ flush I,D TLBs mov pc, r12 -__arm6_cache_on: +__arm6_mmu_cache_on: mov r12, lr bl __setup_mmu mov r0, #0 mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3 mcr p15, 0, r0, c5, c0, 0 @ invalidate whole TLB v3 mov r0, #0x30 - bl __common_cache_on + bl __common_mmu_cache_on mov r0, #0 mcr p15, 0, r0, c5, c0, 0 @ invalidate whole TLB v3 mov pc, r12 -__common_cache_on: +__common_mmu_cache_on: #ifndef DEBUG orr r0, r0, #0x000d @ Write buffer, mmu #endif @@ -471,12 +471,12 @@ call_cache_fn: adr r12, proc_types proc_types: .word 0x41560600 @ ARM6/610 .word 0xffffffe0 - b __arm6_cache_off @ works, but slow - b __arm6_cache_off + b __arm6_mmu_cache_off @ works, but slow + b __arm6_mmu_cache_off mov pc, lr -@ b __arm6_cache_on @ untested -@ b __arm6_cache_off -@ b __armv3_cache_flush +@ b __arm6_mmu_cache_on @ untested +@ b __arm6_mmu_cache_off +@ b __armv3_mmu_cache_flush .word 0x00000000 @ old ARM ID .word 0x0000f000 @@ -486,14 +486,14 @@ proc_types: .word 0x41007000 @ ARM7/710 .word 0xfff8fe00 - b __arm7_cache_off - b __arm7_cache_off + b __arm7_mmu_cache_off + b __arm7_mmu_cache_off mov pc, lr .word 0x41807200 @ ARM720T (writethrough) .word 0xffffff00 - b __armv4_cache_on - b __armv4_cache_off + b __armv4_mmu_cache_on + b __armv4_mmu_cache_off mov pc, lr .word 0x00007000 @ ARM7 IDs @@ -506,41 +506,41 @@ proc_types: .word 0x4401a100 @ sa110 / sa1100 .word 0xffffffe0 - b __armv4_cache_on - b __armv4_cache_off - b __armv4_cache_flush + b __armv4_mmu_cache_on + b __armv4_mmu_cache_off + b __armv4_mmu_cache_flush .word 0x6901b110 @ sa1110 .word 0xfffffff0 - b __armv4_cache_on - b __armv4_cache_off - b __armv4_cache_flush + b __armv4_mmu_cache_on + b __armv4_mmu_cache_off + b __armv4_mmu_cache_flush @ These match on the architecture ID .word 0x00020000 @ ARMv4T .word 0x000f0000 - b __armv4_cache_on - b __armv4_cache_off - b __armv4_cache_flush + b __armv4_mmu_cache_on + b __armv4_mmu_cache_off + b __armv4_mmu_cache_flush .word 0x00050000 @ ARMv5TE .word 0x000f0000 - b __armv4_cache_on - b __armv4_cache_off - b __armv4_cache_flush + b __armv4_mmu_cache_on + b __armv4_mmu_cache_off + b __armv4_mmu_cache_flush .word 0x00060000 @ ARMv5TEJ .word 0x000f0000 - b __armv4_cache_on - b __armv4_cache_off - b __armv4_cache_flush + b __armv4_mmu_cache_on + b __armv4_mmu_cache_off + b __armv4_mmu_cache_flush .word 0x00070000 @ ARMv6 .word 0x000f0000 - b __armv4_cache_on - b __armv4_cache_off - b __armv6_cache_flush + b __armv4_mmu_cache_on + b __armv4_mmu_cache_off + b __armv6_mmu_cache_flush .word 0 @ unrecognised type .word 0 @@ -562,7 +562,7 @@ proc_types: cache_off: mov r3, #12 @ cache_off function b call_cache_fn -__armv4_cache_off: +__armv4_mmu_cache_off: mrc p15, 0, r0, c1, c0 bic r0, r0, #0x000d mcr p15, 0, r0, c1, c0 @ turn MMU and cache off @@ -571,15 +571,15 @@ __armv4_cache_off: mcr p15, 0, r0, c8, c7 @ invalidate whole TLB v4 mov pc, lr -__arm6_cache_off: +__arm6_mmu_cache_off: mov r0, #0x00000030 @ ARM6 control reg. - b __armv3_cache_off + b __armv3_mmu_cache_off -__arm7_cache_off: +__arm7_mmu_cache_off: mov r0, #0x00000070 @ ARM7 control reg. - b __armv3_cache_off + b __armv3_mmu_cache_off -__armv3_cache_off: +__armv3_mmu_cache_off: mcr p15, 0, r0, c1, c0, 0 @ turn MMU and cache off mov r0, #0 mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3 @@ -601,7 +601,7 @@ cache_clean_flush: mov r3, #16 b call_cache_fn -__armv6_cache_flush: +__armv6_mmu_cache_flush: mov r1, #0 mcr p15, 0, r1, c7, c14, 0 @ clean+invalidate D mcr p15, 0, r1, c7, c5, 0 @ invalidate I+BTB @@ -609,7 +609,7 @@ __armv6_cache_flush: mcr p15, 0, r1, c7, c10, 4 @ drain WB mov pc, lr -__armv4_cache_flush: +__armv4_mmu_cache_flush: mov r2, #64*1024 @ default: 32K dcache size (*2) mov r11, #32 @ default: 32 byte line size mrc p15, 0, r3, c0, c0, 1 @ read cache type @@ -637,7 +637,7 @@ no_cache_id: mcr p15, 0, r1, c7, c10, 4 @ drain WB mov pc, lr -__armv3_cache_flush: +__armv3_mmu_cache_flush: mov r1, #0 mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3 mov pc, lr -- cgit v1.2.3-18-g5258 From a72011567812cbd93788cc5facda160a3cba5905 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Fri, 24 Mar 2006 03:15:07 -0800 Subject: [PATCH] more-for_each_cpu-conversions fix I screwed up this conversion - we should be iterating across online CPUs, not possible ones. Spotted by Joe Perches Cc: Dave Jones Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/cpu/cpufreq/powernow-k8.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c index 3d5110b65cc..798da7c2b5d 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c @@ -1145,14 +1145,14 @@ static int __cpuinit powernowk8_init(void) { unsigned int i, supported_cpus = 0; - for_each_cpu(i) { + for_each_online_cpu(i) { if (check_supported_cpu(i)) supported_cpus++; } if (supported_cpus == num_online_cpus()) { - printk(KERN_INFO PFX "Found %d AMD Athlon 64 / Opteron processors (" VERSION ")\n", - supported_cpus); + printk(KERN_INFO PFX "Found %d AMD Athlon 64 / Opteron " + "processors (" VERSION ")\n", supported_cpus); return cpufreq_register_driver(&cpufreq_amd64_driver); } -- cgit v1.2.3-18-g5258 From 3d1712c91df01d2573b934e972e231e8edb102c7 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Fri, 24 Mar 2006 03:15:11 -0800 Subject: [PATCH] x86_64: {set,clear,test}_bit() related cleanup and pci_mmcfg_init() fix While working on these patch set, I found several possible cleanup on x86-64 and ia64. akpm: I stole this from Andi's queue. Not only does it clean up bitops. It also unrelatedly changes the prototype of pci_mmcfg_init() and removes its arch_initcall(). It seems that the wrong two patches got joined together, but this is the one which has been tested. This patch fixes the current x86_64 build error (the pci_mmcfg_init() declaration in arch/i386/pci/pci.h disagrees with the definition in arch/x86_64/pci/mmconfig.c) This also means that x86_64's pci_mmcfg_init() gets called in the same (new) manner as x86's: from arch/i386/pci/init.c:pci_access_init(), rather than via initcall. The bitops cleanups came along for free. All this worked OK in -mm testing (since 2.6.16-rc4-mm1) because x86_64 was tested with both patches applied. Signed-off-by: Akinobu Mita Signed-off-by: Andi Kleen Cc: Con Kolivas Cc: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/mce.c | 3 +-- arch/x86_64/kernel/setup.c | 3 +-- arch/x86_64/pci/mmconfig.c | 18 +++++++----------- 3 files changed, 9 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/mce.c b/arch/x86_64/kernel/mce.c index b8b9529fa89..04282ef9fbd 100644 --- a/arch/x86_64/kernel/mce.c +++ b/arch/x86_64/kernel/mce.c @@ -139,8 +139,7 @@ static void mce_panic(char *msg, struct mce *backup, unsigned long start) static int mce_available(struct cpuinfo_x86 *c) { - return test_bit(X86_FEATURE_MCE, &c->x86_capability) && - test_bit(X86_FEATURE_MCA, &c->x86_capability); + return cpu_has(c, X86_FEATURE_MCE) && cpu_has(c, X86_FEATURE_MCA); } static inline void mce_get_rip(struct mce *m, struct pt_regs *regs) diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index aa55e3cec66..f227d0c23dc 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -1344,8 +1344,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) { int i; for ( i = 0 ; i < 32*NCAPINTS ; i++ ) - if ( test_bit(i, &c->x86_capability) && - x86_cap_flags[i] != NULL ) + if (cpu_has(c, i) && x86_cap_flags[i] != NULL) seq_printf(m, " %s", x86_cap_flags[i]); } diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c index 18f371fe37f..e616500207e 100644 --- a/arch/x86_64/pci/mmconfig.c +++ b/arch/x86_64/pci/mmconfig.c @@ -55,7 +55,7 @@ static char __iomem *get_virt(unsigned int seg, unsigned bus) static char __iomem *pci_dev_base(unsigned int seg, unsigned int bus, unsigned int devfn) { char __iomem *addr; - if (seg == 0 && bus == 0 && test_bit(PCI_SLOT(devfn), &fallback_slots)) + if (seg == 0 && bus == 0 && test_bit(PCI_SLOT(devfn), fallback_slots)) return NULL; addr = get_virt(seg, bus); if (!addr) @@ -143,29 +143,29 @@ static __init void unreachable_devices(void) continue; addr = pci_dev_base(0, 0, PCI_DEVFN(i, 0)); if (addr == NULL|| readl(addr) != val1) { - set_bit(i, &fallback_slots); + set_bit(i, fallback_slots); } } } -static int __init pci_mmcfg_init(void) +void __init pci_mmcfg_init(void) { int i; if ((pci_probe & PCI_PROBE_MMCONF) == 0) - return 0; + return; acpi_table_parse(ACPI_MCFG, acpi_parse_mcfg); if ((pci_mmcfg_config_num == 0) || (pci_mmcfg_config == NULL) || (pci_mmcfg_config[0].base_address == 0)) - return 0; + return; /* RED-PEN i386 doesn't do _nocache right now */ pci_mmcfg_virt = kmalloc(sizeof(*pci_mmcfg_virt) * pci_mmcfg_config_num, GFP_KERNEL); if (pci_mmcfg_virt == NULL) { printk("PCI: Can not allocate memory for mmconfig structures\n"); - return 0; + return; } for (i = 0; i < pci_mmcfg_config_num; ++i) { pci_mmcfg_virt[i].cfg = &pci_mmcfg_config[i]; @@ -173,7 +173,7 @@ static int __init pci_mmcfg_init(void) if (!pci_mmcfg_virt[i].virt) { printk("PCI: Cannot map mmconfig aperture for segment %d\n", pci_mmcfg_config[i].pci_segment_group_number); - return 0; + return; } printk(KERN_INFO "PCI: Using MMCONFIG at %x\n", pci_mmcfg_config[i].base_address); } @@ -182,8 +182,4 @@ static int __init pci_mmcfg_init(void) raw_pci_ops = &pci_mmcfg; pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF; - - return 0; } - -arch_initcall(pci_mmcfg_init); -- cgit v1.2.3-18-g5258 From 596852967ce3208b90132895dd1992a31b058bc8 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 24 Mar 2006 03:15:15 -0800 Subject: [PATCH] s390: early parameter parsing Use common code parser for early parameters instead of our own. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/s390/kernel/setup.c | 108 ++++++++++++++++++++--------------------------- 1 file changed, 45 insertions(+), 63 deletions(-) (limited to 'arch') diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 24f62f16c0e..0a04e4a564b 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -78,8 +78,6 @@ extern int _text,_etext, _edata, _end; #include -static char command_line[COMMAND_LINE_SIZE] = { 0, }; - static struct resource code_resource = { .name = "Kernel code", .start = (unsigned long) &_text, @@ -335,63 +333,38 @@ add_memory_hole(unsigned long start, unsigned long end) } } -static void __init -parse_cmdline_early(char **cmdline_p) +static int __init early_parse_mem(char *p) +{ + memory_end = memparse(p, &p); + return 0; +} +early_param("mem", early_parse_mem); + +/* + * "ipldelay=XXX[sm]" sets ipl delay in seconds or minutes + */ +static int __init early_parse_ipldelay(char *p) { - char c = ' ', cn, *to = command_line, *from = COMMAND_LINE; unsigned long delay = 0; - /* Save unparsed command line copy for /proc/cmdline */ - memcpy(saved_command_line, COMMAND_LINE, COMMAND_LINE_SIZE); - saved_command_line[COMMAND_LINE_SIZE-1] = '\0'; + delay = simple_strtoul(p, &p, 0); - for (;;) { - /* - * "mem=XXX[kKmM]" sets memsize - */ - if (c == ' ' && strncmp(from, "mem=", 4) == 0) { - memory_end = simple_strtoul(from+4, &from, 0); - if ( *from == 'K' || *from == 'k' ) { - memory_end = memory_end << 10; - from++; - } else if ( *from == 'M' || *from == 'm' ) { - memory_end = memory_end << 20; - from++; - } - } - /* - * "ipldelay=XXX[sm]" sets ipl delay in seconds or minutes - */ - if (c == ' ' && strncmp(from, "ipldelay=", 9) == 0) { - delay = simple_strtoul(from+9, &from, 0); - if (*from == 's' || *from == 'S') { - delay = delay*1000000; - from++; - } else if (*from == 'm' || *from == 'M') { - delay = delay*60*1000000; - from++; - } - /* now wait for the requested amount of time */ - udelay(delay); - } - cn = *(from++); - if (!cn) - break; - if (cn == '\n') - cn = ' '; /* replace newlines with space */ - if (cn == 0x0d) - cn = ' '; /* replace 0x0d with space */ - if (cn == ' ' && c == ' ') - continue; /* remove additional spaces */ - c = cn; - if (to - command_line >= COMMAND_LINE_SIZE) - break; - *(to++) = c; + switch (*p) { + case 's': + case 'S': + delay *= 1000000; + break; + case 'm': + case 'M': + delay *= 60 * 1000000; } - if (c == ' ' && to > command_line) to--; - *to = '\0'; - *cmdline_p = command_line; + + /* now wait for the requested amount of time */ + udelay(delay); + + return 0; } +early_param("ipldelay", early_parse_ipldelay); static void __init setup_lowcore(void) @@ -580,9 +553,26 @@ setup_arch(char **cmdline_p) "We are running native (64 bit mode)\n"); #endif /* CONFIG_64BIT */ + /* Save unparsed command line copy for /proc/cmdline */ + strlcpy(saved_command_line, COMMAND_LINE, COMMAND_LINE_SIZE); + + *cmdline_p = COMMAND_LINE; + *(*cmdline_p + COMMAND_LINE_SIZE - 1) = '\0'; + ROOT_DEV = Root_RAM0; + + init_mm.start_code = PAGE_OFFSET; + init_mm.end_code = (unsigned long) &_etext; + init_mm.end_data = (unsigned long) &_edata; + init_mm.brk = (unsigned long) &_end; + + memory_end = memory_size; + + parse_early_param(); + #ifndef CONFIG_64BIT - memory_end = memory_size & ~0x400000UL; /* align memory end to 4MB */ + memory_end &= ~0x400000UL; + /* * We need some free virtual space to be able to do vmalloc. * On a machine with 2GB memory we make sure that we have at @@ -591,17 +581,9 @@ setup_arch(char **cmdline_p) if (memory_end > 1920*1024*1024) memory_end = 1920*1024*1024; #else /* CONFIG_64BIT */ - memory_end = memory_size & ~0x200000UL; /* detected in head.s */ + memory_end &= ~0x200000UL; #endif /* CONFIG_64BIT */ - init_mm.start_code = PAGE_OFFSET; - init_mm.end_code = (unsigned long) &_etext; - init_mm.end_data = (unsigned long) &_edata; - init_mm.brk = (unsigned long) &_end; - - parse_cmdline_early(cmdline_p); - parse_early_param(); - setup_memory(); setup_resources(); setup_lowcore(); -- cgit v1.2.3-18-g5258 From 5e8b1c4083a7f0f1e671ea16e23b78d1c8d3e0aa Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 24 Mar 2006 03:15:16 -0800 Subject: [PATCH] s390: /proc/sys/vm/cmm_* permission bits Set permissoin of /proc/sys/vm/cmm_* files to 0644. Signed-off-by: Martin Schwidefsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/s390/mm/cmm.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/s390/mm/cmm.c b/arch/s390/mm/cmm.c index b075ab499d0..51596f42923 100644 --- a/arch/s390/mm/cmm.c +++ b/arch/s390/mm/cmm.c @@ -339,19 +339,19 @@ static struct ctl_table cmm_table[] = { { .ctl_name = VM_CMM_PAGES, .procname = "cmm_pages", - .mode = 0600, + .mode = 0644, .proc_handler = &cmm_pages_handler, }, { .ctl_name = VM_CMM_TIMED_PAGES, .procname = "cmm_timed_pages", - .mode = 0600, + .mode = 0644, .proc_handler = &cmm_pages_handler, }, { .ctl_name = VM_CMM_TIMEOUT, .procname = "cmm_timeout", - .mode = 0600, + .mode = 0644, .proc_handler = &cmm_timeout_handler, }, { .ctl_name = 0 } -- cgit v1.2.3-18-g5258 From 699ff13f10b75ea929eea6f6fe47ba9cc8f92ca2 Mon Sep 17 00:00:00 2001 From: Michael Ryan Date: Fri, 24 Mar 2006 03:15:17 -0800 Subject: [PATCH] s390: cpu up retries Retry starting of new cpu if sigp restart returns condition code 2 (busy). Signed-off-by: Michael Ryan Signed-off-by: Martin Schwidefsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/s390/kernel/smp.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index d52d6d211d9..2b8841f8553 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -665,7 +665,9 @@ __cpu_up(unsigned int cpu) cpu_lowcore->current_task = (unsigned long) idle; cpu_lowcore->cpu_data.cpu_nr = cpu; eieio(); - signal_processor(cpu,sigp_restart); + + while (signal_processor(cpu,sigp_restart) == sigp_busy) + udelay(10); while (!cpu_online(cpu)) cpu_relax(); -- cgit v1.2.3-18-g5258 From 61d3ad0edf67e3baa66f124bc9ce964523d41809 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 24 Mar 2006 03:15:18 -0800 Subject: [PATCH] s390: connector support Include connector config in the s390 arch Kconfig to get support for connectors. Signed-off-by: Martin Schwidefsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/s390/Kconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index b7ca5bf9acf..2b7364ed23b 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -460,6 +460,8 @@ config PCMCIA source "drivers/base/Kconfig" +source "drivers/connector/Kconfig" + source "drivers/scsi/Kconfig" source "drivers/s390/Kconfig" -- cgit v1.2.3-18-g5258 From fb630517f0d0736ea73af07d6b357be9ad67e6f1 Mon Sep 17 00:00:00 2001 From: Eric Sesterhenn Date: Fri, 24 Mar 2006 03:15:31 -0800 Subject: [PATCH] s390: kzalloc() conversion in arch/s390 Convert all kmalloc + memset sequences in arch/s390 to kzalloc usage. Signed-off-by: Eric Sesterhenn Signed-off-by: Martin Schwidefsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/s390/appldata/appldata_base.c | 3 +-- arch/s390/kernel/debug.c | 11 +++-------- 2 files changed, 4 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c index d06a8d71c71..54d35c13090 100644 --- a/arch/s390/appldata/appldata_base.c +++ b/arch/s390/appldata/appldata_base.c @@ -531,12 +531,11 @@ int appldata_register_ops(struct appldata_ops *ops) P_ERROR("ctl_nr %i already in use!\n", ops->ctl_nr); return -EBUSY; } - ops->ctl_table = kmalloc(4*sizeof(struct ctl_table), GFP_KERNEL); + ops->ctl_table = kzalloc(4*sizeof(struct ctl_table), GFP_KERNEL); if (ops->ctl_table == NULL) { P_ERROR("Not enough memory for %s ctl_table!\n", ops->name); return -ENOMEM; } - memset(ops->ctl_table, 0, 4*sizeof(struct ctl_table)); spin_lock(&appldata_ops_lock); list_for_each(lh, &appldata_ops_list) { diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c index 896d39d0e4c..06a3fbc1253 100644 --- a/arch/s390/kernel/debug.c +++ b/arch/s390/kernel/debug.c @@ -204,16 +204,13 @@ debug_areas_alloc(int pages_per_area, int nr_areas) goto fail_malloc_areas2; } for(j = 0; j < pages_per_area; j++) { - areas[i][j] = (debug_entry_t*)kmalloc(PAGE_SIZE, - GFP_KERNEL); + areas[i][j] = kzalloc(PAGE_SIZE, GFP_KERNEL); if(!areas[i][j]) { for(j--; j >=0 ; j--) { kfree(areas[i][j]); } kfree(areas[i]); goto fail_malloc_areas2; - } else { - memset(areas[i][j],0,PAGE_SIZE); } } } @@ -249,14 +246,12 @@ debug_info_alloc(char *name, int pages_per_area, int nr_areas, int buf_size, rc = (debug_info_t*) kmalloc(sizeof(debug_info_t), GFP_KERNEL); if(!rc) goto fail_malloc_rc; - rc->active_entries = (int*)kmalloc(nr_areas * sizeof(int), GFP_KERNEL); + rc->active_entries = kcalloc(nr_areas, sizeof(int), GFP_KERNEL); if(!rc->active_entries) goto fail_malloc_active_entries; - memset(rc->active_entries, 0, nr_areas * sizeof(int)); - rc->active_pages = (int*)kmalloc(nr_areas * sizeof(int), GFP_KERNEL); + rc->active_pages = kcalloc(nr_areas, sizeof(int), GFP_KERNEL); if(!rc->active_pages) goto fail_malloc_active_pages; - memset(rc->active_pages, 0, nr_areas * sizeof(int)); if((mode == ALL_AREAS) && (pages_per_area != 0)){ rc->areas = debug_areas_alloc(pages_per_area, nr_areas); if(!rc->areas) -- cgit v1.2.3-18-g5258 From cdb0452789d365695b5b173542af9c7e3d24f185 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Fri, 24 Mar 2006 03:15:57 -0800 Subject: [PATCH] kill include/linux/platform.h, default_idle() cleanup include/linux/platform.h contained nothing that was actually used except the default_idle() prototype, and is therefore removed by this patch. This patch does the following with the platform specific default_idle() functions on different architectures: - remove the unused function: - parisc - sparc64 - make the needlessly global function static: - arm - h8300 - m68k - m68knommu - s390 - v850 - x86_64 - add a prototype in asm/system.h: - cris - i386 - ia64 Signed-off-by: Adrian Bunk Acked-by: Patrick Mochel Acked-by: Kyle McMartin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/cris/kernel/process.c | 3 +-- arch/h8300/kernel/process.c | 4 ++-- arch/i386/kernel/apm.c | 2 -- arch/i386/mach-visws/reboot.c | 1 - arch/ia64/kernel/setup.c | 1 - arch/m68k/kernel/process.c | 2 +- arch/m68knommu/kernel/process.c | 2 +- arch/parisc/kernel/process.c | 5 ----- arch/s390/kernel/process.c | 2 +- arch/sh/kernel/process.c | 1 - arch/v850/kernel/process.c | 2 +- arch/x86_64/kernel/process.c | 2 +- 12 files changed, 8 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/cris/kernel/process.c b/arch/cris/kernel/process.c index 4ab3e87115b..123451c4415 100644 --- a/arch/cris/kernel/process.c +++ b/arch/cris/kernel/process.c @@ -116,6 +116,7 @@ #include #include #include +#include #include #include #include @@ -194,8 +195,6 @@ EXPORT_SYMBOL(enable_hlt); */ void (*pm_idle)(void); -extern void default_idle(void); - /* * The idle thread. There's no useful work to be * done, so just try to conserve power and have a diff --git a/arch/h8300/kernel/process.c b/arch/h8300/kernel/process.c index dd344f112cf..16ccddc69c2 100644 --- a/arch/h8300/kernel/process.c +++ b/arch/h8300/kernel/process.c @@ -54,7 +54,7 @@ asmlinkage void ret_from_fork(void); * The idle loop on an H8/300.. */ #if !defined(CONFIG_H8300H_SIM) && !defined(CONFIG_H8S_SIM) -void default_idle(void) +static void default_idle(void) { local_irq_disable(); if (!need_resched()) { @@ -65,7 +65,7 @@ void default_idle(void) local_irq_enable(); } #else -void default_idle(void) +static void default_idle(void) { cpu_relax(); } diff --git a/arch/i386/kernel/apm.c b/arch/i386/kernel/apm.c index 05312a8abb8..da30a374dd4 100644 --- a/arch/i386/kernel/apm.c +++ b/arch/i386/kernel/apm.c @@ -824,8 +824,6 @@ static void apm_do_busy(void) static void (*original_pm_idle)(void); -extern void default_idle(void); - /** * apm_cpu_idle - cpu idling for APM capable Linux * diff --git a/arch/i386/mach-visws/reboot.c b/arch/i386/mach-visws/reboot.c index 5d73e042ed0..99332abfad4 100644 --- a/arch/i386/mach-visws/reboot.c +++ b/arch/i386/mach-visws/reboot.c @@ -1,7 +1,6 @@ #include #include #include -#include #include #include "piix4.h" diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index 3258e09278d..958c1508036 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -41,7 +41,6 @@ #include #include #include -#include #include #include diff --git a/arch/m68k/kernel/process.c b/arch/m68k/kernel/process.c index 2d8ad0727b6..33648efb772 100644 --- a/arch/m68k/kernel/process.c +++ b/arch/m68k/kernel/process.c @@ -77,7 +77,7 @@ unsigned long thread_saved_pc(struct task_struct *tsk) /* * The idle loop on an m68k.. */ -void default_idle(void) +static void default_idle(void) { if (!need_resched()) #if defined(MACH_ATARI_ONLY) && !defined(CONFIG_HADES) diff --git a/arch/m68knommu/kernel/process.c b/arch/m68knommu/kernel/process.c index 63c117dae0c..f861755ec88 100644 --- a/arch/m68knommu/kernel/process.c +++ b/arch/m68knommu/kernel/process.c @@ -51,7 +51,7 @@ EXPORT_SYMBOL(pm_power_off); /* * The idle loop on an m68knommu.. */ -void default_idle(void) +static void default_idle(void) { local_irq_disable(); while (!need_resched()) { diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c index e8dea417711..0b485ef4be8 100644 --- a/arch/parisc/kernel/process.c +++ b/arch/parisc/kernel/process.c @@ -54,11 +54,6 @@ #include #include -void default_idle(void) -{ - barrier(); -} - /* * The idle thread. There's no useful work to be * done, so just try to conserve power and have a diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c index da6fbae8df9..99182a415fe 100644 --- a/arch/s390/kernel/process.c +++ b/arch/s390/kernel/process.c @@ -103,7 +103,7 @@ extern void s390_handle_mcck(void); /* * The idle loop on a S390... */ -void default_idle(void) +static void default_idle(void) { int cpu, rc; diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c index 9fd1723e621..22dc9c21201 100644 --- a/arch/sh/kernel/process.c +++ b/arch/sh/kernel/process.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include diff --git a/arch/v850/kernel/process.c b/arch/v850/kernel/process.c index 621111ddf90..57218c76925 100644 --- a/arch/v850/kernel/process.c +++ b/arch/v850/kernel/process.c @@ -37,7 +37,7 @@ extern void ret_from_fork (void); /* The idle loop. */ -void default_idle (void) +static void default_idle (void) { while (! need_resched ()) asm ("halt; nop; nop; nop; nop; nop" ::: "cc"); diff --git a/arch/x86_64/kernel/process.c b/arch/x86_64/kernel/process.c index 22a05dec81a..80a8f307917 100644 --- a/arch/x86_64/kernel/process.c +++ b/arch/x86_64/kernel/process.c @@ -114,7 +114,7 @@ void exit_idle(void) * We use this if we don't have any better * idle routine.. */ -void default_idle(void) +static void default_idle(void) { local_irq_enable(); -- cgit v1.2.3-18-g5258 From 53b3531bbbf70ac7551b32d1acc229d94de52658 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Fri, 24 Mar 2006 03:16:13 -0800 Subject: [PATCH] s/;;/;/g Signed-off-by: Alexey Dobriyan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/arm/mach-pxa/leds-mainstone.c | 6 +++--- arch/arm/mach-s3c2410/cpu.c | 2 +- arch/frv/kernel/gdb-stub.c | 2 +- arch/ia64/sn/kernel/bte.c | 2 +- arch/ia64/sn/pci/tioca_provider.c | 2 +- arch/mips/mm/dma-ip32.c | 6 +++--- arch/ppc/syslib/ppc85xx_setup.c | 2 +- arch/sparc64/kernel/irq.c | 2 +- 8 files changed, 12 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/leds-mainstone.c b/arch/arm/mach-pxa/leds-mainstone.c index bbd3f87a9fc..c06d3d7a8dd 100644 --- a/arch/arm/mach-pxa/leds-mainstone.c +++ b/arch/arm/mach-pxa/leds-mainstone.c @@ -85,7 +85,7 @@ void mainstone_leds_event(led_event_t evt) break; case led_green_on: - hw_led_state |= D21;; + hw_led_state |= D21; break; case led_green_off: @@ -93,7 +93,7 @@ void mainstone_leds_event(led_event_t evt) break; case led_amber_on: - hw_led_state |= D22;; + hw_led_state |= D22; break; case led_amber_off: @@ -101,7 +101,7 @@ void mainstone_leds_event(led_event_t evt) break; case led_red_on: - hw_led_state |= D23;; + hw_led_state |= D23; break; case led_red_off: diff --git a/arch/arm/mach-s3c2410/cpu.c b/arch/arm/mach-s3c2410/cpu.c index 00a379334b6..70c34fcf785 100644 --- a/arch/arm/mach-s3c2410/cpu.c +++ b/arch/arm/mach-s3c2410/cpu.c @@ -146,7 +146,7 @@ void s3c24xx_set_board(struct s3c24xx_board *b) board = b; if (b->clocks_count != 0) { - struct clk **ptr = b->clocks;; + struct clk **ptr = b->clocks; for (i = b->clocks_count; i > 0; i--, ptr++) s3c24xx_register_clock(*ptr); diff --git a/arch/frv/kernel/gdb-stub.c b/arch/frv/kernel/gdb-stub.c index 8f860d9c494..508601fad07 100644 --- a/arch/frv/kernel/gdb-stub.c +++ b/arch/frv/kernel/gdb-stub.c @@ -1406,7 +1406,7 @@ void gdbstub(int sigval) __debug_frame->psr |= PSR_S; __debug_regs->brr = (__debug_frame->tbr & TBR_TT) << 12; __debug_regs->brr |= BRR_EB; - sigval = SIGXCPU;; + sigval = SIGXCPU; } LEDS(0x5002); diff --git a/arch/ia64/sn/kernel/bte.c b/arch/ia64/sn/kernel/bte.c index 1f11db470d9..e952ef4f6d9 100644 --- a/arch/ia64/sn/kernel/bte.c +++ b/arch/ia64/sn/kernel/bte.c @@ -36,7 +36,7 @@ static struct bteinfo_s *bte_if_on_node(nasid_t nasid, int interface) nodepda_t *tmp_nodepda; if (nasid_to_cnodeid(nasid) == -1) - return (struct bteinfo_s *)NULL;; + return (struct bteinfo_s *)NULL; tmp_nodepda = NODEPDA(nasid_to_cnodeid(nasid)); return &tmp_nodepda->bte_if[interface]; diff --git a/arch/ia64/sn/pci/tioca_provider.c b/arch/ia64/sn/pci/tioca_provider.c index 7571a402552..be017691296 100644 --- a/arch/ia64/sn/pci/tioca_provider.c +++ b/arch/ia64/sn/pci/tioca_provider.c @@ -377,7 +377,7 @@ tioca_dma_mapped(struct pci_dev *pdev, u64 paddr, size_t req_size) struct tioca_dmamap *ca_dmamap; void *map; unsigned long flags; - struct pcidev_info *pcidev_info = SN_PCIDEV_INFO(pdev);; + struct pcidev_info *pcidev_info = SN_PCIDEV_INFO(pdev); tioca_common = (struct tioca_common *)pcidev_info->pdi_pcibus_info; tioca_kern = (struct tioca_kernel *)tioca_common->ca_kernel_private; diff --git a/arch/mips/mm/dma-ip32.c b/arch/mips/mm/dma-ip32.c index a7e3072ff78..ec54ed0d26f 100644 --- a/arch/mips/mm/dma-ip32.c +++ b/arch/mips/mm/dma-ip32.c @@ -138,7 +138,7 @@ dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, BUG(); } - addr = virt_to_phys(ptr)&RAM_OFFSET_MASK;; + addr = virt_to_phys(ptr)&RAM_OFFSET_MASK; if(dev == NULL) addr+=CRIME_HI_MEM_BASE; return (dma_addr_t)addr; @@ -179,7 +179,7 @@ int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, addr = (unsigned long) page_address(sg->page)+sg->offset; if (addr) __dma_sync(addr, sg->length, direction); - addr = __pa(addr)&RAM_OFFSET_MASK;; + addr = __pa(addr)&RAM_OFFSET_MASK; if(dev == NULL) addr += CRIME_HI_MEM_BASE; sg->dma_address = (dma_addr_t)addr; @@ -199,7 +199,7 @@ dma_addr_t dma_map_page(struct device *dev, struct page *page, addr = (unsigned long) page_address(page) + offset; dma_cache_wback_inv(addr, size); - addr = __pa(addr)&RAM_OFFSET_MASK;; + addr = __pa(addr)&RAM_OFFSET_MASK; if(dev == NULL) addr += CRIME_HI_MEM_BASE; diff --git a/arch/ppc/syslib/ppc85xx_setup.c b/arch/ppc/syslib/ppc85xx_setup.c index e70b34ee627..79b7089d750 100644 --- a/arch/ppc/syslib/ppc85xx_setup.c +++ b/arch/ppc/syslib/ppc85xx_setup.c @@ -235,7 +235,7 @@ mpc85xx_setup_pci2(struct pci_controller *hose) (__ilog2(MPC85XX_PCI2_UPPER_MEM - MPC85XX_PCI2_LOWER_MEM + 1) - 1); /* Setup outbound IO windows @ MPC85XX_PCI2_IO_BASE */ - pci->potar2 = (MPC85XX_PCI2_LOWER_IO >> 12) & 0x000fffff;; + pci->potar2 = (MPC85XX_PCI2_LOWER_IO >> 12) & 0x000fffff; pci->potear2 = 0x00000000; pci->powbar2 = (MPC85XX_PCI2_IO_BASE >> 12) & 0x000fffff; /* Enable, IO R/W */ diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index e505a4125e3..11e645c9ec5 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -727,7 +727,7 @@ void handler_irq(int irq, struct pt_regs *regs) } #ifdef CONFIG_BLK_DEV_FD -extern irqreturn_t floppy_interrupt(int, void *, struct pt_regs *);; +extern irqreturn_t floppy_interrupt(int, void *, struct pt_regs *); /* XXX No easy way to include asm/floppy.h XXX */ extern unsigned char *pdma_vaddr; -- cgit v1.2.3-18-g5258 From a94ddf3ab866df9c187c9d8b3870b7ec38c6f7ad Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 24 Mar 2006 03:18:05 -0800 Subject: [PATCH] early_printk: cleanup trailiing whitespace Remove all trailing tabs and spaces. No other changes. Signed-off-by: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/early_printk.c | 90 +++++++++++++++++++-------------------- 1 file changed, 45 insertions(+), 45 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/early_printk.c b/arch/x86_64/kernel/early_printk.c index a8a6aa70d69..13af920b659 100644 --- a/arch/x86_64/kernel/early_printk.c +++ b/arch/x86_64/kernel/early_printk.c @@ -60,7 +60,7 @@ static struct console early_vga_console = { .index = -1, }; -/* Serial functions loosely based on a similar package from Klaus P. Gerlicher */ +/* Serial functions loosely based on a similar package from Klaus P. Gerlicher */ static int early_serial_base = 0x3f8; /* ttyS0 */ @@ -80,30 +80,30 @@ static int early_serial_base = 0x3f8; /* ttyS0 */ #define DLL 0 /* Divisor Latch Low */ #define DLH 1 /* Divisor latch High */ -static int early_serial_putc(unsigned char ch) -{ - unsigned timeout = 0xffff; - while ((inb(early_serial_base + LSR) & XMTRDY) == 0 && --timeout) +static int early_serial_putc(unsigned char ch) +{ + unsigned timeout = 0xffff; + while ((inb(early_serial_base + LSR) & XMTRDY) == 0 && --timeout) cpu_relax(); outb(ch, early_serial_base + TXR); return timeout ? 0 : -1; -} +} static void early_serial_write(struct console *con, const char *s, unsigned n) { - while (*s && n-- > 0) { - early_serial_putc(*s); - if (*s == '\n') - early_serial_putc('\r'); - s++; - } -} + while (*s && n-- > 0) { + early_serial_putc(*s); + if (*s == '\n') + early_serial_putc('\r'); + s++; + } +} #define DEFAULT_BAUD 9600 static __init void early_serial_init(char *s) { - unsigned char c; + unsigned char c; unsigned divisor; unsigned baud = DEFAULT_BAUD; char *e; @@ -112,7 +112,7 @@ static __init void early_serial_init(char *s) ++s; if (*s) { - unsigned port; + unsigned port; if (!strncmp(s,"0x",2)) { early_serial_base = simple_strtoul(s, &e, 16); } else { @@ -136,16 +136,16 @@ static __init void early_serial_init(char *s) outb(0x3, early_serial_base + MCR); /* DTR + RTS */ if (*s) { - baud = simple_strtoul(s, &e, 0); - if (baud == 0 || s == e) + baud = simple_strtoul(s, &e, 0); + if (baud == 0 || s == e) baud = DEFAULT_BAUD; - } - - divisor = 115200 / baud; - c = inb(early_serial_base + LCR); - outb(c | DLAB, early_serial_base + LCR); - outb(divisor & 0xff, early_serial_base + DLL); - outb((divisor >> 8) & 0xff, early_serial_base + DLH); + } + + divisor = 115200 / baud; + c = inb(early_serial_base + LCR); + outb(c | DLAB, early_serial_base + LCR); + outb(divisor & 0xff, early_serial_base + DLL); + outb((divisor >> 8) & 0xff, early_serial_base + DLH); outb(c & ~DLAB, early_serial_base + LCR); } @@ -202,68 +202,68 @@ struct console *early_console = &early_vga_console; static int early_console_initialized = 0; void early_printk(const char *fmt, ...) -{ - char buf[512]; - int n; +{ + char buf[512]; + int n; va_list ap; - va_start(ap,fmt); + va_start(ap,fmt); n = vscnprintf(buf,512,fmt,ap); early_console->write(early_console,buf,n); - va_end(ap); -} + va_end(ap); +} static int __initdata keep_early; -int __init setup_early_printk(char *opt) -{ +int __init setup_early_printk(char *opt) +{ char *space; - char buf[256]; + char buf[256]; if (early_console_initialized) return -1; - strlcpy(buf,opt,sizeof(buf)); - space = strchr(buf, ' '); + strlcpy(buf,opt,sizeof(buf)); + space = strchr(buf, ' '); if (space) - *space = 0; + *space = 0; if (strstr(buf,"keep")) - keep_early = 1; + keep_early = 1; - if (!strncmp(buf, "serial", 6)) { + if (!strncmp(buf, "serial", 6)) { early_serial_init(buf + 6); early_console = &early_serial_console; - } else if (!strncmp(buf, "ttyS", 4)) { + } else if (!strncmp(buf, "ttyS", 4)) { early_serial_init(buf); - early_console = &early_serial_console; + early_console = &early_serial_console; } else if (!strncmp(buf, "vga", 3) && SCREEN_INFO.orig_video_isVGA == 1) { max_xpos = SCREEN_INFO.orig_video_cols; max_ypos = SCREEN_INFO.orig_video_lines; current_ypos = SCREEN_INFO.orig_y; - early_console = &early_vga_console; + early_console = &early_vga_console; } else if (!strncmp(buf, "simnow", 6)) { simnow_init(buf + 6); early_console = &simnow_console; keep_early = 1; } early_console_initialized = 1; - register_console(early_console); + register_console(early_console); return 0; } void __init disable_early_printk(void) -{ +{ if (!early_console_initialized || !early_console) return; if (!keep_early) { printk("disabling early console\n"); unregister_console(early_console); early_console_initialized = 0; - } else { + } else { printk("keeping early console\n"); } -} +} __setup("earlyprintk=", setup_early_printk); -- cgit v1.2.3-18-g5258 From 4741c9fd36b3bcadd37238321c469049da94a4b9 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Fri, 24 Mar 2006 03:18:11 -0800 Subject: [PATCH] set_page_dirty() return value fixes We need set_page_dirty() to return true if it actually transitioned the page from a clean to dirty state. This wasn't right in a couple of places. Do a kernel-wide audit, fix things up. This leaves open the possibility of returning a negative errno from set_page_dirty() sometime in the future. But we don't do that at present. Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/cris/arch-v32/drivers/cryptocop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/cris/arch-v32/drivers/cryptocop.c b/arch/cris/arch-v32/drivers/cryptocop.c index 501fa52d8d3..c59ee28a35f 100644 --- a/arch/cris/arch-v32/drivers/cryptocop.c +++ b/arch/cris/arch-v32/drivers/cryptocop.c @@ -2944,7 +2944,7 @@ static int cryptocop_ioctl_process(struct inode *inode, struct file *filp, unsig int spdl_err; /* Mark output pages dirty. */ spdl_err = set_page_dirty_lock(outpages[i]); - DEBUG(if (spdl_err)printk("cryptocop_ioctl_process: set_page_dirty_lock returned %d\n", spdl_err)); + DEBUG(if (spdl_err < 0)printk("cryptocop_ioctl_process: set_page_dirty_lock returned %d\n", spdl_err)); } for (i = 0; i < nooutpages; i++){ put_page(outpages[i]); -- cgit v1.2.3-18-g5258 From d2a28ad9fa7bf16761d070d8a3338375e1574b32 Mon Sep 17 00:00:00 2001 From: Russ Anderson Date: Fri, 24 Mar 2006 09:49:52 -0800 Subject: [IA64] MCA recovery: kernel context recovery table Memory errors encountered by user applications may surface when the CPU is running in kernel context. The current code will not attempt recovery if the MCA surfaces in kernel context (privilage mode 0). This patch adds a check for cases where the user initiated the load that surfaces in kernel interrupt code. An example is a user process lauching a load from memory and the data in memory had bad ECC. Before the bad data gets to the CPU register, and interrupt comes in. The code jumps to the IVT interrupt entry point and begins execution in kernel context. The process of saving the user registers (SAVE_REST) causes the bad data to be loaded into a CPU register, triggering the MCA. The MCA surfaces in kernel context, even though the load was initiated from user context. As suggested by David and Tony, this patch uses an exception table like approach, puting the tagged recovery addresses in a searchable table. One difference from the exception table is that MCAs do not surface in precise places (such as with a TLB miss), so instead of tagging specific instructions, address ranges are registers. A single macro is used to do the tagging, with the input parameter being the label of the starting address and the macro being the ending address. This limits clutter in the code. This patch only tags one spot, the interrupt ivt entry. Testing showed that spot to be a "heavy hitter" with MCAs surfacing while saving user registers. Other spots can be added as needed by adding a single macro. Signed-off-by: Russ Anderson (rja@sgi.com) Signed-off-by: Tony Luck --- arch/ia64/kernel/ivt.S | 1 + arch/ia64/kernel/mca.c | 98 +++++++++++++++++++++++++++++++----------- arch/ia64/kernel/mca_drv.c | 22 +++++++--- arch/ia64/kernel/mca_drv.h | 7 +++ arch/ia64/kernel/mca_drv_asm.S | 13 ++---- arch/ia64/kernel/vmlinux.lds.S | 9 ++++ 6 files changed, 109 insertions(+), 41 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S index dcd906fe574..829a43cab79 100644 --- a/arch/ia64/kernel/ivt.S +++ b/arch/ia64/kernel/ivt.S @@ -865,6 +865,7 @@ ENTRY(interrupt) ;; SAVE_REST ;; + MCA_RECOVER_RANGE(interrupt) alloc r14=ar.pfs,0,0,2,0 // must be first in an insn group mov out0=cr.ivr // pass cr.ivr as first arg add out1=16,sp // pass pointer to pt_regs as second arg diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index cedcae713e9..87ff7fe33cf 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -83,6 +83,7 @@ #include #include +#include "mca_drv.h" #include "entry.h" #if defined(IA64_MCA_DEBUG_INFO) @@ -281,6 +282,50 @@ ia64_mca_log_sal_error_record(int sal_info_type) ia64_sal_clear_state_info(sal_info_type); } +/* + * search_mca_table + * See if the MCA surfaced in an instruction range + * that has been tagged as recoverable. + * + * Inputs + * first First address range to check + * last Last address range to check + * ip Instruction pointer, address we are looking for + * + * Return value: + * 1 on Success (in the table)/ 0 on Failure (not in the table) + */ +int +search_mca_table (const struct mca_table_entry *first, + const struct mca_table_entry *last, + unsigned long ip) +{ + const struct mca_table_entry *curr; + u64 curr_start, curr_end; + + curr = first; + while (curr <= last) { + curr_start = (u64) &curr->start_addr + curr->start_addr; + curr_end = (u64) &curr->end_addr + curr->end_addr; + + if ((ip >= curr_start) && (ip <= curr_end)) { + return 1; + } + curr++; + } + return 0; +} + +/* Given an address, look for it in the mca tables. */ +int mca_recover_range(unsigned long addr) +{ + extern struct mca_table_entry __start___mca_table[]; + extern struct mca_table_entry __stop___mca_table[]; + + return search_mca_table(__start___mca_table, __stop___mca_table-1, addr); +} +EXPORT_SYMBOL_GPL(mca_recover_range); + #ifdef CONFIG_ACPI int cpe_vector = -1; @@ -747,31 +792,34 @@ ia64_mca_modify_original_stack(struct pt_regs *regs, ia64_mca_modify_comm(previous_current); goto no_mod; } - if (r13 != sos->prev_IA64_KR_CURRENT) { - msg = "inconsistent previous current and r13"; - goto no_mod; - } - if ((r12 - r13) >= KERNEL_STACK_SIZE) { - msg = "inconsistent r12 and r13"; - goto no_mod; - } - if ((ar_bspstore - r13) >= KERNEL_STACK_SIZE) { - msg = "inconsistent ar.bspstore and r13"; - goto no_mod; - } - va.p = old_bspstore; - if (va.f.reg < 5) { - msg = "old_bspstore is in the wrong region"; - goto no_mod; - } - if ((ar_bsp - r13) >= KERNEL_STACK_SIZE) { - msg = "inconsistent ar.bsp and r13"; - goto no_mod; - } - size += (ia64_rse_skip_regs(old_bspstore, slots) - old_bspstore) * 8; - if (ar_bspstore + size > r12) { - msg = "no room for blocked state"; - goto no_mod; + + if (!mca_recover_range(ms->pmsa_iip)) { + if (r13 != sos->prev_IA64_KR_CURRENT) { + msg = "inconsistent previous current and r13"; + goto no_mod; + } + if ((r12 - r13) >= KERNEL_STACK_SIZE) { + msg = "inconsistent r12 and r13"; + goto no_mod; + } + if ((ar_bspstore - r13) >= KERNEL_STACK_SIZE) { + msg = "inconsistent ar.bspstore and r13"; + goto no_mod; + } + va.p = old_bspstore; + if (va.f.reg < 5) { + msg = "old_bspstore is in the wrong region"; + goto no_mod; + } + if ((ar_bsp - r13) >= KERNEL_STACK_SIZE) { + msg = "inconsistent ar.bsp and r13"; + goto no_mod; + } + size += (ia64_rse_skip_regs(old_bspstore, slots) - old_bspstore) * 8; + if (ar_bspstore + size > r12) { + msg = "no room for blocked state"; + goto no_mod; + } } ia64_mca_modify_comm(previous_current); diff --git a/arch/ia64/kernel/mca_drv.c b/arch/ia64/kernel/mca_drv.c index e883d85906d..37c88eb5587 100644 --- a/arch/ia64/kernel/mca_drv.c +++ b/arch/ia64/kernel/mca_drv.c @@ -6,6 +6,7 @@ * Copyright (C) Hidetoshi Seto (seto.hidetoshi@jp.fujitsu.com) * Copyright (C) 2005 Silicon Graphics, Inc * Copyright (C) 2005 Keith Owens + * Copyright (C) 2006 Russ Anderson */ #include #include @@ -121,11 +122,12 @@ mca_page_isolate(unsigned long paddr) */ void -mca_handler_bh(unsigned long paddr) +mca_handler_bh(unsigned long paddr, void *iip, unsigned long ipsr) { - printk(KERN_ERR - "OS_MCA: process [pid: %d](%s) encounters MCA (paddr=%lx)\n", - current->pid, current->comm, paddr); + printk(KERN_ERR "OS_MCA: process [cpu %d, pid: %d, uid: %d, " + "iip: %p, psr: 0x%lx,paddr: 0x%lx](%s) encounters MCA.\n", + raw_smp_processor_id(), current->pid, current->uid, + iip, ipsr, paddr, current->comm); spin_lock(&mca_bh_lock); switch (mca_page_isolate(paddr)) { @@ -442,21 +444,26 @@ recover_from_read_error(slidx_table_t *slidx, if (!peidx_bottom(peidx) || !(peidx_bottom(peidx)->valid.minstate)) return 0; psr1 =(struct ia64_psr *)&(peidx_minstate_area(peidx)->pmsa_ipsr); + psr2 =(struct ia64_psr *)&(peidx_minstate_area(peidx)->pmsa_xpsr); /* * Check the privilege level of interrupted context. * If it is user-mode, then terminate affected process. */ - if (psr1->cpl != 0) { + + pmsa = sos->pal_min_state; + if (psr1->cpl != 0 || + ((psr2->cpl != 0) && mca_recover_range(pmsa->pmsa_iip))) { smei = peidx_bus_check(peidx, 0); if (smei->valid.target_identifier) { /* * setup for resume to bottom half of MCA, * "mca_handler_bhhook" */ - pmsa = sos->pal_min_state; - /* pass to bhhook as 1st argument (gr8) */ + /* pass to bhhook as argument (gr8, ...) */ pmsa->pmsa_gr[8-1] = smei->target_identifier; + pmsa->pmsa_gr[9-1] = pmsa->pmsa_iip; + pmsa->pmsa_gr[10-1] = pmsa->pmsa_ipsr; /* set interrupted return address (but no use) */ pmsa->pmsa_br0 = pmsa->pmsa_iip; /* change resume address to bottom half */ @@ -466,6 +473,7 @@ recover_from_read_error(slidx_table_t *slidx, psr2 = (struct ia64_psr *)&pmsa->pmsa_ipsr; psr2->cpl = 0; psr2->ri = 0; + psr2->bn = 1; psr2->i = 0; return 1; diff --git a/arch/ia64/kernel/mca_drv.h b/arch/ia64/kernel/mca_drv.h index e2f6fa1e0ef..31a2e52bb16 100644 --- a/arch/ia64/kernel/mca_drv.h +++ b/arch/ia64/kernel/mca_drv.h @@ -111,3 +111,10 @@ typedef struct slidx_table { slidx_foreach_entry(__pos, &((slidx)->sec)) { __count++; }\ __count; }) +struct mca_table_entry { + int start_addr; /* location-relative starting address of MCA recoverable range */ + int end_addr; /* location-relative ending address of MCA recoverable range */ +}; + +extern const struct mca_table_entry *search_mca_tables (unsigned long addr); +extern int mca_recover_range(unsigned long); diff --git a/arch/ia64/kernel/mca_drv_asm.S b/arch/ia64/kernel/mca_drv_asm.S index 3f298ee4d00..e6a580d354b 100644 --- a/arch/ia64/kernel/mca_drv_asm.S +++ b/arch/ia64/kernel/mca_drv_asm.S @@ -14,15 +14,12 @@ GLOBAL_ENTRY(mca_handler_bhhook) invala // clear RSE ? - ;; cover ;; clrrrb ;; - alloc r16=ar.pfs,0,2,1,0 // make a new frame - ;; + alloc r16=ar.pfs,0,2,3,0 // make a new frame mov ar.rsc=0 - ;; mov r13=IA64_KR(CURRENT) // current task pointer ;; mov r2=r13 @@ -30,7 +27,6 @@ GLOBAL_ENTRY(mca_handler_bhhook) addl r22=IA64_RBS_OFFSET,r2 ;; mov ar.bspstore=r22 - ;; addl sp=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r2 ;; adds r2=IA64_TASK_THREAD_ON_USTACK_OFFSET,r13 @@ -40,12 +36,12 @@ GLOBAL_ENTRY(mca_handler_bhhook) movl loc1=mca_handler_bh // recovery C function ;; mov out0=r8 // poisoned address + mov out1=r9 // iip + mov out2=r10 // psr mov b6=loc1 ;; mov loc1=rp - ;; - ssm psr.i - ;; + ssm psr.i | psr.ic br.call.sptk.many rp=b6 // does not return ... ;; mov ar.pfs=loc0 @@ -53,5 +49,4 @@ GLOBAL_ENTRY(mca_handler_bhhook) ;; mov r8=r0 br.ret.sptk.many rp - ;; END(mca_handler_bhhook) diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S index 632d65cc068..0b9e56dd7f0 100644 --- a/arch/ia64/kernel/vmlinux.lds.S +++ b/arch/ia64/kernel/vmlinux.lds.S @@ -130,6 +130,15 @@ SECTIONS __initcall_end = .; } + /* MCA table */ + . = ALIGN(16); + __mca_table : AT(ADDR(__mca_table) - LOAD_OFFSET) + { + __start___mca_table = .; + *(__mca_table) + __stop___mca_table = .; + } + .data.patch.vtop : AT(ADDR(.data.patch.vtop) - LOAD_OFFSET) { __start___vtop_patchlist = .; -- cgit v1.2.3-18-g5258 From b17ea91a43ea0c746ab4cabb698275e1771ed23d Mon Sep 17 00:00:00 2001 From: "Chen, Kenneth W" Date: Sun, 12 Mar 2006 11:10:00 -0800 Subject: [IA64] cleanup dig_irq_init dig_irq_init is equivalent to machvec_noop, no need to define another empty function. Signed-off-by: Ken Chen Signed-off-by: Tony Luck --- arch/ia64/dig/setup.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'arch') diff --git a/arch/ia64/dig/setup.c b/arch/ia64/dig/setup.c index c9104bfff66..38aa9c10885 100644 --- a/arch/ia64/dig/setup.c +++ b/arch/ia64/dig/setup.c @@ -69,8 +69,3 @@ dig_setup (char **cmdline_p) screen_info.orig_video_isVGA = 1; /* XXX fake */ screen_info.orig_video_ega_bx = 3; /* XXX fake */ } - -void __init -dig_irq_init (void) -{ -} -- cgit v1.2.3-18-g5258 From f90aa8c4febb306e1266e1ad34fd8464e201aa7f Mon Sep 17 00:00:00 2001 From: Prarit Bhargava Date: Wed, 8 Mar 2006 13:30:18 -0500 Subject: [IA64] Tollhouse HP: IA64 arch changes arch/ia64/sn and include/asm-ia64/sn changes required to support Tollhouse system PCI hotplug, fixes the ia64_sn_sysctl_ioboard_get call, and introduces the PRF_HOTPLUG_SUPPORT feature bit. Signed-off-by: Prarit Bhargava Signed-off-by: Tony Luck --- arch/ia64/sn/kernel/io_init.c | 29 +++++++++++++++++++++++++++++ arch/ia64/sn/kernel/tiocx.c | 10 ++++++++-- arch/ia64/sn/pci/pcibr/pcibr_provider.c | 17 +++++++++++++++++ 3 files changed, 54 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c index dfb3f290237..5101ac46264 100644 --- a/arch/ia64/sn/kernel/io_init.c +++ b/arch/ia64/sn/kernel/io_init.c @@ -13,6 +13,8 @@ #include #include #include +#include +#include #include #include #include @@ -710,9 +712,36 @@ cnodeid_get_geoid(cnodeid_t cnode) return hubdev->hdi_geoid; } +void sn_generate_path(struct pci_bus *pci_bus, char *address) +{ + nasid_t nasid; + cnodeid_t cnode; + geoid_t geoid; + moduleid_t moduleid; + u16 bricktype; + + nasid = NASID_GET(SN_PCIBUS_BUSSOFT(pci_bus)->bs_base); + cnode = nasid_to_cnodeid(nasid); + geoid = cnodeid_get_geoid(cnode); + moduleid = geo_module(geoid); + + sprintf(address, "module_%c%c%c%c%.2d", + '0'+RACK_GET_CLASS(MODULE_GET_RACK(moduleid)), + '0'+RACK_GET_GROUP(MODULE_GET_RACK(moduleid)), + '0'+RACK_GET_NUM(MODULE_GET_RACK(moduleid)), + MODULE_GET_BTCHAR(moduleid), MODULE_GET_BPOS(moduleid)); + + /* Tollhouse requires slot id to be displayed */ + bricktype = MODULE_GET_BTYPE(moduleid); + if ((bricktype == L1_BRICKTYPE_191010) || + (bricktype == L1_BRICKTYPE_1932)) + sprintf(address, "%s^%d", address, geo_slot(geoid)); +} + subsys_initcall(sn_pci_init); EXPORT_SYMBOL(sn_pci_fixup_slot); EXPORT_SYMBOL(sn_pci_unfixup_slot); EXPORT_SYMBOL(sn_pci_controller_fixup); EXPORT_SYMBOL(sn_bus_store_sysdata); EXPORT_SYMBOL(sn_bus_free_sysdata); +EXPORT_SYMBOL(sn_generate_path); diff --git a/arch/ia64/sn/kernel/tiocx.c b/arch/ia64/sn/kernel/tiocx.c index 99cb28e7429..feaf1a6e810 100644 --- a/arch/ia64/sn/kernel/tiocx.c +++ b/arch/ia64/sn/kernel/tiocx.c @@ -369,9 +369,15 @@ static void tio_corelet_reset(nasid_t nasid, int corelet) static int is_fpga_tio(int nasid, int *bt) { - int ioboard_type; + u16 ioboard_type; + s64 rc; - ioboard_type = ia64_sn_sysctl_ioboard_get(nasid); + rc = ia64_sn_sysctl_ioboard_get(nasid, &ioboard_type); + if (rc) { + printk(KERN_WARNING "ia64_sn_sysctl_ioboard_get failed: %ld\n", + rc); + return 0; + } switch (ioboard_type) { case L1_BRICKTYPE_SA: diff --git a/arch/ia64/sn/pci/pcibr/pcibr_provider.c b/arch/ia64/sn/pci/pcibr/pcibr_provider.c index 98f716bd92f..ab1211ef017 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_provider.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_provider.c @@ -74,6 +74,22 @@ static int sal_pcibr_error_interrupt(struct pcibus_info *soft) return (int)ret_stuff.v0; } +u16 sn_ioboard_to_pci_bus(struct pci_bus *pci_bus) +{ + s64 rc; + u16 ioboard; + nasid_t nasid = NASID_GET(SN_PCIBUS_BUSSOFT(pci_bus)->bs_base); + + rc = ia64_sn_sysctl_ioboard_get(nasid, &ioboard); + if (rc) { + printk(KERN_WARNING "ia64_sn_sysctl_ioboard_get failed: %ld\n", + rc); + return 0; + } + + return ioboard; +} + /* * PCI Bridge Error interrupt handler. Gets invoked whenever a PCI * bridge sends an error interrupt. @@ -255,3 +271,4 @@ pcibr_init_provider(void) EXPORT_SYMBOL_GPL(sal_pcibr_slot_enable); EXPORT_SYMBOL_GPL(sal_pcibr_slot_disable); +EXPORT_SYMBOL_GPL(sn_ioboard_to_pci_bus); -- cgit v1.2.3-18-g5258 From b354a8388891adc5dc5e5fb0130f000152f3fb94 Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Thu, 2 Mar 2006 16:02:21 -0600 Subject: [IA64] Increase max node count on SN platforms Add a configuration option to allow the maximum number of nodes to be configurable for GENERIC or SN kernels. Signed-off-by: Jack Steiner Signed-off-by: Tony Luck --- arch/ia64/Kconfig | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index ff7ae6b664e..10b6b9e7716 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -252,6 +252,15 @@ config NR_CPUS than 64 will cause the use of a CPU mask array, causing a small performance hit. +config IA64_NR_NODES + int "Maximum number of NODEs (256-1024)" if (IA64_SGI_SN2 || IA64_GENERIC) + range 256 1024 + depends on IA64_SGI_SN2 || IA64_GENERIC + default "256" + help + This option specifies the maximum number of nodes in your SSI system. + If in doubt, use the default. + config HOTPLUG_CPU bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" depends on SMP && EXPERIMENTAL -- cgit v1.2.3-18-g5258 From 3ad5ef8b9d0d0cc2d4b2c63e766ef903d482dfc7 Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Thu, 2 Mar 2006 16:02:25 -0600 Subject: [IA64] Increase max node count on SN platforms Add support in IA64 acpi for platforms that support more than 256 nodes. Currently, ACPI is limited to 256 nodes because the proximity domain number is 8-bits. Long term, we expect to use ACPI3.0 to support >256 nodes. This patch is an interim solution that works with platforms that pass the high order bits of the proximity domain in "reserved" fields of the ACPI tables. This code is enabled ONLY on SN platforms. Signed-off-by: Jack Steiner Signed-off-by: Tony Luck --- arch/ia64/kernel/acpi.c | 32 ++++++++++++++++++++++++++++---- 1 file changed, 28 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 24fe7c81e10..a4e218ce2ed 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -420,6 +420,26 @@ int __devinitdata pxm_to_nid_map[MAX_PXM_DOMAINS]; int __initdata nid_to_pxm_map[MAX_NUMNODES]; static struct acpi_table_slit __initdata *slit_table; +static int get_processor_proximity_domain(struct acpi_table_processor_affinity *pa) +{ + int pxm; + + pxm = pa->proximity_domain; + if (ia64_platform_is("sn2")) + pxm += pa->reserved[0] << 8; + return pxm; +} + +static int get_memory_proximity_domain(struct acpi_table_memory_affinity *ma) +{ + int pxm; + + pxm = ma->proximity_domain; + if (ia64_platform_is("sn2")) + pxm += ma->reserved1[0] << 8; + return pxm; +} + /* * ACPI 2.0 SLIT (System Locality Information Table) * http://devresource.hp.com/devresource/Docs/TechPapers/IA64/slit.pdf @@ -443,16 +463,20 @@ void __init acpi_numa_slit_init(struct acpi_table_slit *slit) void __init acpi_numa_processor_affinity_init(struct acpi_table_processor_affinity *pa) { + int pxm; + if (!pa->flags.enabled) return; + pxm = get_processor_proximity_domain(pa); + /* record this node in proximity bitmap */ - pxm_bit_set(pa->proximity_domain); + pxm_bit_set(pxm); node_cpuid[srat_num_cpus].phys_id = (pa->apic_id << 8) | (pa->lsapic_eid); /* nid should be overridden as logical node id later */ - node_cpuid[srat_num_cpus].nid = pa->proximity_domain; + node_cpuid[srat_num_cpus].nid = pxm; srat_num_cpus++; } @@ -460,10 +484,10 @@ void __init acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma) { unsigned long paddr, size; - u8 pxm; + int pxm; struct node_memblk_s *p, *q, *pend; - pxm = ma->proximity_domain; + pxm = get_memory_proximity_domain(ma); /* fill node memory chunk structure */ paddr = ma->base_addr_hi; -- cgit v1.2.3-18-g5258 From a9de98351436b25b3c2f234addb6d66a6a6f42f8 Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Thu, 2 Mar 2006 16:02:28 -0600 Subject: [IA64] Increase max node count on SN platforms Node number are kept in the cpu_to_node_map which is currently defined as u8. Change to u16 to accomodate larger node numbers. Signed-off-by: Jack Steiner Signed-off-by: Tony Luck --- arch/ia64/kernel/numa.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/kernel/numa.c b/arch/ia64/kernel/numa.c index a68ce667809..0766493d4d0 100644 --- a/arch/ia64/kernel/numa.c +++ b/arch/ia64/kernel/numa.c @@ -25,7 +25,7 @@ #include #include -u8 cpu_to_node_map[NR_CPUS] __cacheline_aligned; +u16 cpu_to_node_map[NR_CPUS] __cacheline_aligned; EXPORT_SYMBOL(cpu_to_node_map); cpumask_t node_to_cpu_mask[MAX_NUMNODES] __cacheline_aligned; -- cgit v1.2.3-18-g5258 From 4d357acadd7a5e60767c748ed7807e11c4387bdf Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Thu, 2 Mar 2006 16:02:32 -0600 Subject: [IA64] Increase max node count on SN platforms Update configuration files with new CONFIG option. Signed-off-by: Jack Steiner Signed-off-by: Tony Luck --- arch/ia64/configs/gensparse_defconfig | 1 + arch/ia64/configs/sn2_defconfig | 1 + arch/ia64/defconfig | 1 + 3 files changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/ia64/configs/gensparse_defconfig b/arch/ia64/configs/gensparse_defconfig index 744fd2f79f6..0d29aa2066b 100644 --- a/arch/ia64/configs/gensparse_defconfig +++ b/arch/ia64/configs/gensparse_defconfig @@ -116,6 +116,7 @@ CONFIG_IOSAPIC=y CONFIG_FORCE_MAX_ZONEORDER=17 CONFIG_SMP=y CONFIG_NR_CPUS=512 +CONFIG_IA64_NR_NODES=256 CONFIG_HOTPLUG_CPU=y # CONFIG_SCHED_SMT is not set # CONFIG_PREEMPT is not set diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig index 8206752161b..a718034d68d 100644 --- a/arch/ia64/configs/sn2_defconfig +++ b/arch/ia64/configs/sn2_defconfig @@ -116,6 +116,7 @@ CONFIG_IA64_SGI_SN_XP=m CONFIG_FORCE_MAX_ZONEORDER=17 CONFIG_SMP=y CONFIG_NR_CPUS=1024 +CONFIG_IA64_NR_NODES=256 # CONFIG_HOTPLUG_CPU is not set CONFIG_SCHED_SMT=y CONFIG_PREEMPT=y diff --git a/arch/ia64/defconfig b/arch/ia64/defconfig index 3e767288a74..6cba55da572 100644 --- a/arch/ia64/defconfig +++ b/arch/ia64/defconfig @@ -116,6 +116,7 @@ CONFIG_IOSAPIC=y CONFIG_FORCE_MAX_ZONEORDER=17 CONFIG_SMP=y CONFIG_NR_CPUS=512 +CONFIG_IA64_NR_NODES=256 CONFIG_HOTPLUG_CPU=y # CONFIG_SCHED_SMT is not set # CONFIG_PREEMPT is not set -- cgit v1.2.3-18-g5258 From 4129a953ad4db379d8e07b0dd2157998653a1325 Mon Sep 17 00:00:00 2001 From: Fenghua Yu Date: Mon, 27 Feb 2006 16:16:22 -0800 Subject: [IA64] New IA64 core/thread detection patch IPF SDM 2.2 changes definition of PAL_LOGICAL_TO_PHYSICAL to add proc_number=-1 to get core/thread mapping info on the running processer. Based on this change, we had better to update existing core/thread detection in IA64 kernel correspondingly. The attached patch implements this change. It simplifies detection code and eliminates potential race condition. It also runs a bit faster and has better scalability especially when cores and threads number grows up in one package. Signed-off-by: Fenghua Yu Signed-off-by: Tony Luck --- arch/ia64/kernel/smpboot.c | 109 ++------------------------------------------- 1 file changed, 4 insertions(+), 105 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c index c4b633b36da..44e9547878a 100644 --- a/arch/ia64/kernel/smpboot.c +++ b/arch/ia64/kernel/smpboot.c @@ -624,31 +624,7 @@ void __devinit smp_prepare_boot_cpu(void) per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE; } -/* - * mt_info[] is a temporary store for all info returned by - * PAL_LOGICAL_TO_PHYSICAL, to be copied into cpuinfo_ia64 when the - * specific cpu comes. - */ -static struct { - __u32 socket_id; - __u16 core_id; - __u16 thread_id; - __u16 proc_fixed_addr; - __u8 valid; -} mt_info[NR_CPUS] __devinitdata; - #ifdef CONFIG_HOTPLUG_CPU -static inline void -remove_from_mtinfo(int cpu) -{ - int i; - - for_each_cpu(i) - if (mt_info[i].valid && mt_info[i].socket_id == - cpu_data(cpu)->socket_id) - mt_info[i].valid = 0; -} - static inline void clear_cpu_sibling_map(int cpu) { @@ -678,12 +654,6 @@ remove_siblinginfo(int cpu) /* remove it from all sibling map's */ clear_cpu_sibling_map(cpu); - - /* if this cpu is the last in the core group, remove all its info - * from mt_info structure - */ - if (last) - remove_from_mtinfo(cpu); } extern void fixup_irqs(void); @@ -878,40 +848,6 @@ init_smp_config(void) ia64_sal_strerror(sal_ret)); } -static inline int __devinit -check_for_mtinfo_index(void) -{ - int i; - - for_each_cpu(i) - if (!mt_info[i].valid) - return i; - - return -1; -} - -/* - * Search the mt_info to find out if this socket's cid/tid information is - * cached or not. If the socket exists, fill in the core_id and thread_id - * in cpuinfo - */ -static int __devinit -check_for_new_socket(__u16 logical_address, struct cpuinfo_ia64 *c) -{ - int i; - __u32 sid = c->socket_id; - - for_each_cpu(i) { - if (mt_info[i].valid && mt_info[i].proc_fixed_addr == logical_address - && mt_info[i].socket_id == sid) { - c->core_id = mt_info[i].core_id; - c->thread_id = mt_info[i].thread_id; - return 1; /* not a new socket */ - } - } - return 0; -} - /* * identify_siblings(cpu) gets called from identify_cpu. This populates the * information related to logical execution units in per_cpu_data structure. @@ -921,14 +857,12 @@ identify_siblings(struct cpuinfo_ia64 *c) { s64 status; u16 pltid; - u64 proc_fixed_addr; - int count, i; pal_logical_to_physical_t info; if (smp_num_cpucores == 1 && smp_num_siblings == 1) return; - if ((status = ia64_pal_logical_to_phys(0, &info)) != PAL_STATUS_SUCCESS) { + if ((status = ia64_pal_logical_to_phys(-1, &info)) != PAL_STATUS_SUCCESS) { printk(KERN_ERR "ia64_pal_logical_to_phys failed with %ld\n", status); return; @@ -937,47 +871,12 @@ identify_siblings(struct cpuinfo_ia64 *c) printk(KERN_ERR "ia64_sal_pltid failed with %ld\n", status); return; } - if ((status = ia64_pal_fixed_addr(&proc_fixed_addr)) != PAL_STATUS_SUCCESS) { - printk(KERN_ERR "ia64_pal_fixed_addr failed with %ld\n", status); - return; - } c->socket_id = (pltid << 8) | info.overview_ppid; c->cores_per_socket = info.overview_cpp; c->threads_per_core = info.overview_tpc; - count = c->num_log = info.overview_num_log; + c->num_log = info.overview_num_log; - /* If the thread and core id information is already cached, then - * we will simply update cpu_info and return. Otherwise, we will - * do the PAL calls and cache core and thread id's of all the siblings. - */ - if (check_for_new_socket(proc_fixed_addr, c)) - return; - - for (i = 0; i < count; i++) { - int index; - - if (i && (status = ia64_pal_logical_to_phys(i, &info)) - != PAL_STATUS_SUCCESS) { - printk(KERN_ERR "ia64_pal_logical_to_phys failed" - " with %ld\n", status); - return; - } - if (info.log2_la == proc_fixed_addr) { - c->core_id = info.log1_cid; - c->thread_id = info.log1_tid; - } - - index = check_for_mtinfo_index(); - /* We will not do the mt_info caching optimization in this case. - */ - if (index < 0) - continue; - - mt_info[index].valid = 1; - mt_info[index].socket_id = c->socket_id; - mt_info[index].core_id = info.log1_cid; - mt_info[index].thread_id = info.log1_tid; - mt_info[index].proc_fixed_addr = info.log2_la; - } + c->core_id = info.log1_cid; + c->thread_id = info.log1_tid; } -- cgit v1.2.3-18-g5258 From bc83455bc8336f57cd74d6e86b0f8fcad187d179 Mon Sep 17 00:00:00 2001 From: Andrey Panin Date: Sat, 25 Mar 2006 03:06:31 -0800 Subject: [PATCH] fix DMI onboard device discovery Attached patch fixes invalid pointer arithmetic in DMI code to make onboard device discovery working again. akpm: bug has been present since dmi_find_device() was added in 2.6.14. Affects ipmi only (I think) - the symptoms weren't described. akpm: changed to use pointer arithmetic rather than open-coded sizeof. Signed-off-by: Andrey Panin Cc: Corey Minyard Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/dmi_scan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/i386/kernel/dmi_scan.c b/arch/i386/kernel/dmi_scan.c index 6a93d75db43..ca2a0cbcac0 100644 --- a/arch/i386/kernel/dmi_scan.c +++ b/arch/i386/kernel/dmi_scan.c @@ -106,7 +106,7 @@ static void __init dmi_save_devices(struct dmi_header *dm) struct dmi_device *dev; for (i = 0; i < count; i++) { - char *d = ((char *) dm) + (i * 2); + char *d = (char *)(dm + 1) + (i * 2); /* Skip disabled device */ if ((*d & 0x80) == 0) -- cgit v1.2.3-18-g5258 From c08b8a49100715b20e6f7c997e992428b5e06078 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 25 Mar 2006 03:06:33 -0800 Subject: [PATCH] sys_alarm() unsigned signed conversion fixup alarm() calls the kernel with an unsigend int timeout in seconds. The value is stored in the tv_sec field of a struct timeval to setup the itimer. The tv_sec field of struct timeval is of type long, which causes the tv_sec value to be negative on 32 bit machines if seconds > INT_MAX. Before the hrtimer merge (pre 2.6.16) such a negative value was converted to the maximum jiffies timeout by the timeval_to_jiffies conversion. It's not clear whether this was intended or just happened to be done by the timeval_to_jiffies code. hrtimers expect a timeval in canonical form and treat a negative timeout as already expired. This breaks the legitimate usage of alarm() with a timeout value > INT_MAX seconds. For 32 bit machines it is therefor necessary to limit the internal seconds value to avoid API breakage. Instead of doing this in all implementations of sys_alarm the duplicated sys_alarm code is moved into a common function in itimer.c Signed-off-by: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ia64/ia32/sys_ia32.c | 14 +------------- arch/mips/kernel/sysirix.c | 22 +--------------------- arch/x86_64/ia32/sys_ia32.c | 16 ++-------------- 3 files changed, 4 insertions(+), 48 deletions(-) (limited to 'arch') diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c index 70dba1f0e2e..13e739e4c84 100644 --- a/arch/ia64/ia32/sys_ia32.c +++ b/arch/ia64/ia32/sys_ia32.c @@ -1166,19 +1166,7 @@ put_tv32 (struct compat_timeval __user *o, struct timeval *i) asmlinkage unsigned long sys32_alarm (unsigned int seconds) { - struct itimerval it_new, it_old; - unsigned int oldalarm; - - it_new.it_interval.tv_sec = it_new.it_interval.tv_usec = 0; - it_new.it_value.tv_sec = seconds; - it_new.it_value.tv_usec = 0; - do_setitimer(ITIMER_REAL, &it_new, &it_old); - oldalarm = it_old.it_value.tv_sec; - /* ehhh.. We can't return 0 if we have an alarm pending.. */ - /* And we'd better return too much than too little anyway */ - if (it_old.it_value.tv_usec) - oldalarm++; - return oldalarm; + return alarm_setitimer(seconds); } /* Translations due to time_t size differences. Which affects all diff --git a/arch/mips/kernel/sysirix.c b/arch/mips/kernel/sysirix.c index 0fc3730a294..5407b784cd0 100644 --- a/arch/mips/kernel/sysirix.c +++ b/arch/mips/kernel/sysirix.c @@ -645,27 +645,7 @@ static inline void getitimer_real(struct itimerval *value) asmlinkage unsigned int irix_alarm(unsigned int seconds) { - struct itimerval it_new, it_old; - unsigned int oldalarm; - - if (!seconds) { - getitimer_real(&it_old); - del_timer(¤t->real_timer); - } else { - it_new.it_interval.tv_sec = it_new.it_interval.tv_usec = 0; - it_new.it_value.tv_sec = seconds; - it_new.it_value.tv_usec = 0; - do_setitimer(ITIMER_REAL, &it_new, &it_old); - } - oldalarm = it_old.it_value.tv_sec; - /* - * ehhh.. We can't return 0 if we have an alarm pending ... - * And we'd better return too much than too little anyway - */ - if (it_old.it_value.tv_usec) - oldalarm++; - - return oldalarm; + return alarm_setitimer(seconds); } asmlinkage int irix_pause(void) diff --git a/arch/x86_64/ia32/sys_ia32.c b/arch/x86_64/ia32/sys_ia32.c index 2bc55af9541..2b2d029f477 100644 --- a/arch/x86_64/ia32/sys_ia32.c +++ b/arch/x86_64/ia32/sys_ia32.c @@ -430,24 +430,12 @@ put_tv32(struct compat_timeval __user *o, struct timeval *i) return err; } -extern int do_setitimer(int which, struct itimerval *, struct itimerval *); +extern unsigned int alarm_setitimer(unsigned int seconds); asmlinkage long sys32_alarm(unsigned int seconds) { - struct itimerval it_new, it_old; - unsigned int oldalarm; - - it_new.it_interval.tv_sec = it_new.it_interval.tv_usec = 0; - it_new.it_value.tv_sec = seconds; - it_new.it_value.tv_usec = 0; - do_setitimer(ITIMER_REAL, &it_new, &it_old); - oldalarm = it_old.it_value.tv_sec; - /* ehhh.. We can't return 0 if we have an alarm pending.. */ - /* And we'd better return too much than too little anyway */ - if (it_old.it_value.tv_usec) - oldalarm++; - return oldalarm; + return alarm_setitimer(seconds); } /* Translations due to time_t size differences. Which affects all -- cgit v1.2.3-18-g5258 From d3f4aaa3d7b4152dac28751ee902f769d03289a1 Mon Sep 17 00:00:00 2001 From: Ashok Raj Date: Sat, 25 Mar 2006 03:06:50 -0800 Subject: [PATCH] x86: make CONFIG_HOTPLUG_CPU depend on !X86_PC Make CONFIG_HOTPLUG_CPU depend on !X86_PC, so we need to turn on either CONFIG_GENERICARCH, CONFIG_BIGSMP or any other subarch except X86_PC when CONFIG_HOTPLUG_CPU=y With 2.6.15+ kernels when CONFIG_HOTPLUG_CPU is turned on we switch to bigsmp mode for sending IPI's and ioapic configurations that caused the following error message. >> More than 8 CPUs detected and CONFIG_X86_PC cannot handle it. >> Use CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP. Originally bigsmp was added just to handle >8 cpus, but now with hotplug cpu support we need to use bigsmp mode (why? see below), that cause the above error message even if there were less than 8 cpus in the system. The message is bogus, but we are cannot use logical flat mode due to issues with broadcast IPI can confuse a CPU just comming up. We use flat physical mode just like x86_64 case. More details on why bigsmp now uses flat physical mode (vs. cluster mode) in following link. http://marc.theaimsgroup.com/?l=linux-kernel&m=113261865814107&w=2 Signed-off-by: Ashok Raj Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index bfea1bedcbf..b008fb0cd7b 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -737,7 +737,7 @@ config PHYSICAL_START config HOTPLUG_CPU bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" - depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER + depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER && !X86_PC ---help--- Say Y here to experiment with turning CPUs off and on. CPUs can be controlled through /sys/devices/system/cpu. -- cgit v1.2.3-18-g5258 From a7d06ca7b626c9257bee4439d9d80a7e44ae237e Mon Sep 17 00:00:00 2001 From: "Chen, Kenneth W" Date: Sat, 25 Mar 2006 03:06:50 -0800 Subject: [PATCH] x86: HUGETLBFS and DEBUG_PAGEALLOC are incompatible DEBUG_PAGEALLOC is not compatible with hugetlb page support. That debug option turns off PSE. Once it is turned off in CR4, the cpu will ignore pse bit in the pmd and causing infinite page-not- present faults. So disable DEBUG_PAGEALLOC if the user selected hugetlbfs. Signed-off-by: Ken Chen Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/Kconfig.debug | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/i386/Kconfig.debug b/arch/i386/Kconfig.debug index 00108ba9a78..c23da8896f3 100644 --- a/arch/i386/Kconfig.debug +++ b/arch/i386/Kconfig.debug @@ -45,7 +45,7 @@ comment "Page alloc debug is incompatible with Software Suspend on i386" config DEBUG_PAGEALLOC bool "Page alloc debugging" - depends on DEBUG_KERNEL && !SOFTWARE_SUSPEND + depends on DEBUG_KERNEL && !SOFTWARE_SUSPEND && !HUGETLBFS help Unmap pages from the kernel linear mapping after free_pages(). This results in a large slowdown, but helps to find certain types -- cgit v1.2.3-18-g5258 From 8d3b33f67fdc0fb364a1ef6d8fbbea7c2e4e6c98 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Sat, 25 Mar 2006 03:07:05 -0800 Subject: [PATCH] Remove MODULE_PARM MODULE_PARM was actually breaking: recent gcc version optimize them out as unused. It's time to replace the last users, which are generally in the most unloved drivers anyway. Signed-off-by: Rusty Russell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/8xx_io/cs4218_tdm.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/ppc/8xx_io/cs4218_tdm.c b/arch/ppc/8xx_io/cs4218_tdm.c index 49eb2a7e65c..a892356d5c3 100644 --- a/arch/ppc/8xx_io/cs4218_tdm.c +++ b/arch/ppc/8xx_io/cs4218_tdm.c @@ -126,11 +126,11 @@ static int numReadBufs = 4, readbufSize = 32; */ static volatile cbd_t *rx_base, *rx_cur, *tx_base, *tx_cur; -MODULE_PARM(catchRadius, "i"); -MODULE_PARM(numBufs, "i"); -MODULE_PARM(bufSize, "i"); -MODULE_PARM(numreadBufs, "i"); -MODULE_PARM(readbufSize, "i"); +module_param(catchRadius, int, 0); +module_param(numBufs, int, 0); +module_param(bufSize, int, 0); +module_param(numreadBufs, int, 0); +module_param(readbufSize, int, 0); #define arraysize(x) (sizeof(x)/sizeof(*(x))) #define le2be16(x) (((x)<<8 & 0xff00) | ((x)>>8 & 0x00ff)) -- cgit v1.2.3-18-g5258 From 2c3ca07d2f691a463b715c83122c87f57c2a7b7c Mon Sep 17 00:00:00 2001 From: Andrey Borzenkov Date: Sat, 25 Mar 2006 03:07:07 -0800 Subject: [PATCH] Fix EDD to properly ignore signature of non-existing drives Some BIOSes do not always set CF on error before return from int13. The patch adds additional check for status being zero (AH == 0). Signed-off-by: Andrey Borzenkov Cc: Matt Domsch Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/boot/edd.S | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/i386/boot/edd.S b/arch/i386/boot/edd.S index d8d69f2b911..4b84ea216f2 100644 --- a/arch/i386/boot/edd.S +++ b/arch/i386/boot/edd.S @@ -76,6 +76,8 @@ edd_mbr_sig_read: popw %es popw %bx jc edd_mbr_sig_done # on failure, we're done. + cmpb $0, %ah # some BIOSes do not set CF + jne edd_mbr_sig_done # on failure, we're done. movl (EDDBUF+EDD_MBR_SIG_OFFSET), %eax # read sig out of the MBR movl %eax, (%bx) # store success incb (EDD_MBR_SIG_NR_BUF) # note that we stored something -- cgit v1.2.3-18-g5258 From 4a2f0acf0f951599fd9e4af95cf9483449970c26 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Sat, 25 Mar 2006 03:07:22 -0800 Subject: [PATCH] kconfig: clarify memory debug options The Kconfig text for CONFIG_DEBUG_SLAB and CONFIG_DEBUG_PAGEALLOC have always seemed a bit confusing. Change them to: CONFIG_DEBUG_SLAB: "Debug slab memory allocations" CONFIG_DEBUG_PAGEALLOC: "Debug page memory allocations" Cc: "David S. Miller" Cc: Hirokazu Takata Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/Kconfig.debug | 2 +- arch/m32r/Kconfig.debug | 2 +- arch/sparc64/Kconfig.debug | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/i386/Kconfig.debug b/arch/i386/Kconfig.debug index c23da8896f3..6e97df6979e 100644 --- a/arch/i386/Kconfig.debug +++ b/arch/i386/Kconfig.debug @@ -44,7 +44,7 @@ comment "Page alloc debug is incompatible with Software Suspend on i386" depends on DEBUG_KERNEL && SOFTWARE_SUSPEND config DEBUG_PAGEALLOC - bool "Page alloc debugging" + bool "Debug page memory allocations" depends on DEBUG_KERNEL && !SOFTWARE_SUSPEND && !HUGETLBFS help Unmap pages from the kernel linear mapping after free_pages(). diff --git a/arch/m32r/Kconfig.debug b/arch/m32r/Kconfig.debug index bbf711bab69..2e1019ddbb2 100644 --- a/arch/m32r/Kconfig.debug +++ b/arch/m32r/Kconfig.debug @@ -19,7 +19,7 @@ config DEBUG_STACK_USAGE This option will slow down process creation somewhat. config DEBUG_PAGEALLOC - bool "Page alloc debugging" + bool "Debug page memory allocations" depends on DEBUG_KERNEL && BROKEN help Unmap pages from the kernel linear mapping after free_pages(). diff --git a/arch/sparc64/Kconfig.debug b/arch/sparc64/Kconfig.debug index 3e31be494e5..afe0a7720a2 100644 --- a/arch/sparc64/Kconfig.debug +++ b/arch/sparc64/Kconfig.debug @@ -24,7 +24,7 @@ config DEBUG_BOOTMEM bool "Debug BOOTMEM initialization" config DEBUG_PAGEALLOC - bool "Page alloc debugging" + bool "Debug page memory allocations" depends on DEBUG_KERNEL && !SOFTWARE_SUSPEND help Unmap pages from the kernel linear mapping after free_pages(). -- cgit v1.2.3-18-g5258 From 44575b2f0873c30ba6010e58048b317474f2bbd0 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Sat, 25 Mar 2006 03:07:34 -0800 Subject: [PATCH] collie: fix missing pcmcia bits This adds missing bits of collie (sharp sl-5500) PCMCIA support and MFD support. Signed-off-by: Pavel Machek Acked-by: Richard Purdie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/arm/mach-sa1100/collie.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index 6888816a193..10245408247 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -40,6 +40,7 @@ #include #include #include +#include #include "generic.h" @@ -66,6 +67,32 @@ struct platform_device colliescoop_device = { .resource = collie_scoop_resources, }; +static struct scoop_pcmcia_dev collie_pcmcia_scoop[] = { +{ + .dev = &colliescoop_device.dev, + .irq = COLLIE_IRQ_GPIO_CF_IRQ, + .cd_irq = COLLIE_IRQ_GPIO_CF_CD, + .cd_irq_str = "PCMCIA0 CD", +}, +}; + +static struct scoop_pcmcia_config collie_pcmcia_config = { + .devs = &collie_pcmcia_scoop[0], + .num_devs = 1, +}; + + +static struct mcp_plat_data collie_mcp_data = { + .mccr0 = MCCR0_ADM, + .sclk_rate = 11981000, +}; + + +static struct sa1100_port_fns collie_port_fns __initdata = { + .set_mctrl = collie_uart_set_mctrl, + .get_mctrl = collie_uart_get_mctrl, +}; + static struct resource locomo_resources[] = { [0] = { @@ -159,6 +186,8 @@ static void __init collie_init(void) GPDR |= GPIO_32_768kHz; TUCR = TUCR_32_768kHz; + platform_scoop_config = &collie_pcmcia_config; + ret = platform_add_devices(devices, ARRAY_SIZE(devices)); if (ret) { printk(KERN_WARNING "collie: Unable to register LoCoMo device\n"); @@ -166,6 +195,7 @@ static void __init collie_init(void) sa11x0_set_flash_data(&collie_flash_data, collie_flash_resources, ARRAY_SIZE(collie_flash_resources)); + sa11x0_set_mcp_data(&collie_mcp_data); sharpsl_save_param(); } -- cgit v1.2.3-18-g5258 From 34f361ade2fb4a869f6a7714d01c04ce4cfa75d9 Mon Sep 17 00:00:00 2001 From: Ashok Raj Date: Sat, 25 Mar 2006 03:08:18 -0800 Subject: [PATCH] Check if cpu can be onlined before calling smp_prepare_cpu() - Moved check for online cpu out of smp_prepare_cpu() - Moved default declaration of smp_prepare_cpu() to kernel/cpu.c - Removed lock_cpu_hotplug() from smp_prepare_cpu() to around it, since its called from cpu_up() as well now. - Removed clearing from cpu_present_map during cpu_offline as it breaks using cpu_up() directly during a subsequent online operation. Signed-off-by: Ashok Raj Cc: Srivatsa Vaddagiri Cc: "Li, Shaohua" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/smpboot.c | 33 ++++++++++++++++++--------------- 1 file changed, 18 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index 4c470e99a74..82371d83bfa 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -1003,7 +1003,6 @@ void cpu_exit_clear(void) cpu_clear(cpu, cpu_callout_map); cpu_clear(cpu, cpu_callin_map); - cpu_clear(cpu, cpu_present_map); cpu_clear(cpu, smp_commenced_mask); unmap_cpu_to_logical_apicid(cpu); @@ -1015,31 +1014,20 @@ struct warm_boot_cpu_info { int cpu; }; -static void __devinit do_warm_boot_cpu(void *p) +static void __cpuinit do_warm_boot_cpu(void *p) { struct warm_boot_cpu_info *info = p; do_boot_cpu(info->apicid, info->cpu); complete(info->complete); } -int __devinit smp_prepare_cpu(int cpu) +static int __cpuinit __smp_prepare_cpu(int cpu) { DECLARE_COMPLETION(done); struct warm_boot_cpu_info info; struct work_struct task; int apicid, ret; - lock_cpu_hotplug(); - - /* - * On x86, CPU0 is never offlined. Trying to bring up an - * already-booted CPU will hang. So check for that case. - */ - if (cpu_online(cpu)) { - ret = -EINVAL; - goto exit; - } - apicid = x86_cpu_to_apicid[cpu]; if (apicid == BAD_APICID) { ret = -ENODEV; @@ -1064,7 +1052,6 @@ int __devinit smp_prepare_cpu(int cpu) zap_low_mappings(); ret = 0; exit: - unlock_cpu_hotplug(); return ret; } #endif @@ -1392,6 +1379,22 @@ void __cpu_die(unsigned int cpu) int __devinit __cpu_up(unsigned int cpu) { +#ifdef CONFIG_HOTPLUG_CPU + int ret=0; + + /* + * We do warm boot only on cpus that had booted earlier + * Otherwise cold boot is all handled from smp_boot_cpus(). + * cpu_callin_map is set during AP kickstart process. Its reset + * when a cpu is taken offline from cpu_exit_clear(). + */ + if (!cpu_isset(cpu, cpu_callin_map)) + ret = __smp_prepare_cpu(cpu); + + if (ret) + return -EIO; +#endif + /* In case one didn't come up */ if (!cpu_isset(cpu, cpu_callin_map)) { printk(KERN_DEBUG "skipping cpu%d, didn't come online\n", cpu); -- cgit v1.2.3-18-g5258 From f081a529f808ed450c22553de7b3275e0ffde9a0 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Sat, 25 Mar 2006 01:51:51 -0800 Subject: [PATCH] cpufreq: speedstep-smi asm fix Fix bug identified by Linus Torvalds : the `out' instruction depends upon the state of memory_data[], so we need to tell gcc that before executing it. (The opcode, not gcc). Fixes http://bugzilla.kernel.org/show_bug.cgi?id=5553 Thanks to Antonio Ospite for testing. Cc: Dave Jones Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/cpu/cpufreq/speedstep-smi.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c index 28cc5d524af..cfc4276e670 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c @@ -75,7 +75,9 @@ static int speedstep_smi_ownership (void) __asm__ __volatile__( "out %%al, (%%dx)\n" : "=D" (result) - : "a" (command), "b" (function), "c" (0), "d" (smi_port), "D" (0), "S" (magic) + : "a" (command), "b" (function), "c" (0), "d" (smi_port), + "D" (0), "S" (magic) + : "memory" ); dprintk("result is %x\n", result); -- cgit v1.2.3-18-g5258 From af8fc1f528fd744e0b92cdb981eec0c8841f6f61 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Sat, 25 Mar 2006 16:29:00 +0100 Subject: [PATCH] x86_64: Update defconfig Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/defconfig | 34 ++++++++++++++++------------------ 1 file changed, 16 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig index ce4de61ed85..566ecc97ee5 100644 --- a/arch/x86_64/defconfig +++ b/arch/x86_64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc3-git9 -# Sat Feb 18 00:27:03 2006 +# Linux kernel version: 2.6.16-git9 +# Sat Mar 25 15:18:40 2006 # CONFIG_X86_64=y CONFIG_64BIT=y @@ -38,6 +38,7 @@ CONFIG_SYSCTL=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" CONFIG_UID16=y CONFIG_VM86=y @@ -79,6 +80,7 @@ CONFIG_STOP_MACHINE=y # Block layer # CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set # # IO Schedulers @@ -139,7 +141,6 @@ CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y CONFIG_NR_CPUS=32 CONFIG_HOTPLUG_CPU=y CONFIG_HPET_TIMER=y -CONFIG_X86_PM_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_GART_IOMMU=y CONFIG_SWIOTLB=y @@ -148,12 +149,13 @@ CONFIG_X86_MCE_INTEL=y CONFIG_X86_MCE_AMD=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set -CONFIG_PHYSICAL_START=0x100000 +CONFIG_PHYSICAL_START=0x200000 CONFIG_SECCOMP=y # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_REORDER is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ISA_DMA_API=y @@ -189,12 +191,14 @@ CONFIG_ACPI_NUMA=y # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_IBM is not set CONFIG_ACPI_TOSHIBA=y -CONFIG_ACPI_BLACKLIST_YEAR=2001 +CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y +CONFIG_X86_PM_TIMER=y CONFIG_ACPI_CONTAINER=y +CONFIG_ACPI_HOTPLUG_MEMORY=y # # CPU Frequency scaling @@ -232,10 +236,8 @@ CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y -CONFIG_UNORDERED_IO=y CONFIG_PCIEPORTBUS=y CONFIG_PCI_MSI=y -# CONFIG_PCI_LEGACY_PROC is not set # CONFIG_PCI_DEBUG is not set # @@ -294,6 +296,7 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_BIC=y CONFIG_IPV6=y # CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set # CONFIG_INET6_IPCOMP is not set @@ -701,6 +704,7 @@ CONFIG_S2IO=m # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set +# CONFIG_NET_WIRELESS_RTNETLINK is not set # # Wan interfaces @@ -861,6 +865,8 @@ CONFIG_RTC=y CONFIG_AGP=y CONFIG_AGP_AMD64=y CONFIG_AGP_INTEL=y +# CONFIG_AGP_SIS is not set +# CONFIG_AGP_VIA is not set # CONFIG_DRM is not set # CONFIG_MWAVE is not set CONFIG_RAW_DRIVER=y @@ -906,10 +912,6 @@ CONFIG_HWMON=y # # CONFIG_IBM_ASM is not set -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -974,6 +976,7 @@ CONFIG_SOUND_ICH=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -1002,7 +1005,6 @@ CONFIG_USB_UHCI_HCD=y # # USB Device Class drivers # -# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y @@ -1121,11 +1123,7 @@ CONFIG_USB_MON=y # CONFIG_INFINIBAND is not set # -# SN Devices -# - -# -# EDAC - error detection and reporting (RAS) +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # # CONFIG_EDAC is not set @@ -1198,7 +1196,6 @@ CONFIG_TMPFS=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=y # CONFIG_CONFIGFS_FS is not set # @@ -1321,6 +1318,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_DEBUG_FS=y # CONFIG_DEBUG_VM is not set # CONFIG_FRAME_POINTER is not set +# CONFIG_UNWIND_INFO is not set # CONFIG_FORCED_INLINING is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUG_RODATA is not set -- cgit v1.2.3-18-g5258 From c7ea1a96ec007ba761c9d5d11d788cd8fdd5c8b6 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Sat, 25 Mar 2006 16:29:03 +0100 Subject: [PATCH] x86_64: Use correct PUD for memory hotadd Memory >39bits has a different PUD. Cc: "Tolentino, Matthew E" Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/mm/init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86_64/mm/init.c b/arch/x86_64/mm/init.c index 40ed13d263c..675a4569133 100644 --- a/arch/x86_64/mm/init.c +++ b/arch/x86_64/mm/init.c @@ -344,7 +344,7 @@ void __meminit init_memory_mapping(unsigned long start, unsigned long end) pud_t *pud; if (after_bootmem) - pud = pud_offset_k(pgd, __PAGE_OFFSET); + pud = pud_offset_k(pgd, start & PGDIR_MASK); else pud = alloc_low_page(&map, &pud_phys); -- cgit v1.2.3-18-g5258 From dca99a38bccceda9e079d4c95abefbd9028605fe Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Sat, 25 Mar 2006 16:29:06 +0100 Subject: [PATCH] x86-64: Use -mtune=generic for generic kernels The upcomming gcc 4.2 got a new option -mtune=generic to tune code for both common AMD and Intel CPUs. Use this option when available for generic kernels. On x86-64 it is used with CONFIG_GENERIC_CPU. On i386 it is enabled with CONFIG_X86_GENERIC. It won't affect the base line CPU support in any ways and also not the minimum supported CPU. Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/i386/Makefile.cpu | 4 ++++ arch/x86_64/Makefile | 1 + 2 files changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/i386/Makefile.cpu b/arch/i386/Makefile.cpu index dcd936ef45d..a11befba26d 100644 --- a/arch/i386/Makefile.cpu +++ b/arch/i386/Makefile.cpu @@ -39,3 +39,7 @@ cflags-$(CONFIG_X86_ELAN) += -march=i486 # Geode GX1 support cflags-$(CONFIG_MGEODEGX1) += -march=pentium-mmx +# add at the end to overwrite eventual tuning options from earlier +# cpu entries +cflags-$(CONFIG_X86_GENERIC) += $(call tune,generic) + diff --git a/arch/x86_64/Makefile b/arch/x86_64/Makefile index 7405dfd6522..f5e48ba9bec 100644 --- a/arch/x86_64/Makefile +++ b/arch/x86_64/Makefile @@ -29,6 +29,7 @@ CHECKFLAGS += -D__x86_64__ -m64 cflags-$(CONFIG_MK8) += $(call cc-option,-march=k8) cflags-$(CONFIG_MPSC) += $(call cc-option,-march=nocona) +cflags-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=generic) CFLAGS += $(cflags-y) CFLAGS += -m64 -- cgit v1.2.3-18-g5258 From abe059e7590fd4475285f2d037c70dec712a4572 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Sat, 25 Mar 2006 16:29:12 +0100 Subject: [PATCH] x86_64: Rename struct node in x86-64 NUMA code to struct bootnode It conflicts with the struct node in node.h Actually the x86-64 version was there first, but .. Suggested by Jan Beulich Cc: jbeulich@novell.com Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/mm/k8topology.c | 2 +- arch/x86_64/mm/numa.c | 6 +++--- arch/x86_64/mm/srat.c | 8 ++++---- 3 files changed, 8 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/mm/k8topology.c b/arch/x86_64/mm/k8topology.c index dd60e71fdba..7c45c2d2b8b 100644 --- a/arch/x86_64/mm/k8topology.c +++ b/arch/x86_64/mm/k8topology.c @@ -43,7 +43,7 @@ static __init int find_northbridge(void) int __init k8_scan_nodes(unsigned long start, unsigned long end) { unsigned long prevbase; - struct node nodes[8]; + struct bootnode nodes[8]; int nodeid, i, nb; unsigned char nodeids[8]; int found = 0; diff --git a/arch/x86_64/mm/numa.c b/arch/x86_64/mm/numa.c index 22e51beee8d..e4b62753a19 100644 --- a/arch/x86_64/mm/numa.c +++ b/arch/x86_64/mm/numa.c @@ -47,7 +47,7 @@ int numa_off __initdata; * -1 if node overlap or lost ram (shift too big) */ static int __init -populate_memnodemap(const struct node *nodes, int numnodes, int shift) +populate_memnodemap(const struct bootnode *nodes, int numnodes, int shift) { int i; int res = -1; @@ -74,7 +74,7 @@ populate_memnodemap(const struct node *nodes, int numnodes, int shift) return res; } -int __init compute_hash_shift(struct node *nodes, int numnodes) +int __init compute_hash_shift(struct bootnode *nodes, int numnodes) { int shift = 20; @@ -191,7 +191,7 @@ int numa_fake __initdata = 0; static int numa_emulation(unsigned long start_pfn, unsigned long end_pfn) { int i; - struct node nodes[MAX_NUMNODES]; + struct bootnode nodes[MAX_NUMNODES]; unsigned long sz = ((end_pfn - start_pfn)<start == nd->end) continue; if (nd->end > start && nd->start < end) @@ -70,7 +70,7 @@ static __init int conflicting_nodes(unsigned long start, unsigned long end) static __init void cutoff_node(int i, unsigned long start, unsigned long end) { - struct node *nd = &nodes[i]; + struct bootnode *nd = &nodes[i]; if (nd->start < start) { nd->start = start; if (nd->end < nd->start) @@ -159,7 +159,7 @@ acpi_numa_processor_affinity_init(struct acpi_table_processor_affinity *pa) void __init acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma) { - struct node *nd; + struct bootnode *nd; unsigned long start, end; int node, pxm; int i; -- cgit v1.2.3-18-g5258 From 3240114d23793384fa9c3c53f391f672d1c22d2e Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Sat, 25 Mar 2006 16:29:16 +0100 Subject: [PATCH] x86_64: cpu_pda array to macro followup correction Fix one place where the previous change of cpu_pda from being an array to being a macro was not properly carried out. Signed-off-by: Jan Beulich Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/setup64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/setup64.c b/arch/x86_64/kernel/setup64.c index 70f1bb808a2..349d55c2ac4 100644 --- a/arch/x86_64/kernel/setup64.c +++ b/arch/x86_64/kernel/setup64.c @@ -248,7 +248,7 @@ void __cpuinit cpu_init (void) switch (v + 1) { #if DEBUG_STKSZ > EXCEPTION_STKSZ case DEBUG_STACK: - cpu_pda[cpu].debugstack = (unsigned long)estacks; + cpu_pda(cpu)->debugstack = (unsigned long)estacks; estacks += DEBUG_STKSZ; break; #endif -- cgit v1.2.3-18-g5258 From 893efca9279d7a78bae6532de0524e53370819d5 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Sat, 25 Mar 2006 16:29:19 +0100 Subject: [PATCH] x86_64: disallow multi-byte hardware execution breakpoints While AMD formally permits multi-byte execution breakpoints, Intel disallows 8-byte as much as 2- or 4-byte ones. Signed-off-by: Jan Beulich Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/ptrace.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/ptrace.c b/arch/x86_64/kernel/ptrace.c index 53205622351..d44b2c1e63a 100644 --- a/arch/x86_64/kernel/ptrace.c +++ b/arch/x86_64/kernel/ptrace.c @@ -420,9 +420,9 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) case offsetof(struct user, u_debugreg[7]): /* See arch/i386/kernel/ptrace.c for an explanation of * this awkward check.*/ - data &= ~DR_CONTROL_RESERVED; - for(i=0; i<4; i++) - if ((0x5454 >> ((data >> (16 + 4*i)) & 0xf)) & 1) + data &= ~DR_CONTROL_RESERVED; + for(i=0; i<4; i++) + if ((0x5554 >> ((data >> (16 + 4*i)) & 0xf)) & 1) break; if (i == 4) { child->thread.debugreg7 = data; -- cgit v1.2.3-18-g5258 From 2b514e74f4e59e3b8e54891580fef2c9ff6c7bd0 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Sat, 25 Mar 2006 16:29:22 +0100 Subject: [PATCH] x86_64: eliminate set_debug() For consistency and to have only a single place of definition, replace set_debug() uses with set_debugreg(), and eliminate the definition of thj former. Signed-off-by: Jan Beulich Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/process.c | 2 +- arch/x86_64/kernel/setup64.c | 12 ++++++------ 2 files changed, 7 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/process.c b/arch/x86_64/kernel/process.c index 80a8f307917..0cb93abbf56 100644 --- a/arch/x86_64/kernel/process.c +++ b/arch/x86_64/kernel/process.c @@ -508,7 +508,7 @@ out: /* * This special macro can be used to load a debugging register */ -#define loaddebug(thread,r) set_debug(thread->debugreg ## r, r) +#define loaddebug(thread,r) set_debugreg(thread->debugreg ## r, r) /* * switch_to(x,y) should switch tasks from x to y. diff --git a/arch/x86_64/kernel/setup64.c b/arch/x86_64/kernel/setup64.c index 349d55c2ac4..044587812b0 100644 --- a/arch/x86_64/kernel/setup64.c +++ b/arch/x86_64/kernel/setup64.c @@ -281,12 +281,12 @@ void __cpuinit cpu_init (void) * Clear all 6 debug registers: */ - set_debug(0UL, 0); - set_debug(0UL, 1); - set_debug(0UL, 2); - set_debug(0UL, 3); - set_debug(0UL, 6); - set_debug(0UL, 7); + set_debugreg(0UL, 0); + set_debugreg(0UL, 1); + set_debugreg(0UL, 2); + set_debugreg(0UL, 3); + set_debugreg(0UL, 6); + set_debugreg(0UL, 7); fpu_init(); } -- cgit v1.2.3-18-g5258 From 45948d7720e8bd0104696087c6305fdd90e3b298 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Sat, 25 Mar 2006 16:29:25 +0100 Subject: [PATCH] x86_64: save FPU context slightly later Touching of the floating point state in a kernel debugger must be NMI-safe, specifically math_state_restore() must be able to deal with being called out of an NMI context. In order to do that reliably, the context switch code must take care to not leave a window open where the current task's TS_USEDFPU flag and CR0.TS could get out of sync. Signed-off-by: Jan Beulich Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/process.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/process.c b/arch/x86_64/kernel/process.c index 0cb93abbf56..81111835722 100644 --- a/arch/x86_64/kernel/process.c +++ b/arch/x86_64/kernel/process.c @@ -527,8 +527,6 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) int cpu = smp_processor_id(); struct tss_struct *tss = &per_cpu(init_tss, cpu); - unlazy_fpu(prev_p); - /* * Reload esp0, LDT and the page table pointer: */ @@ -586,11 +584,14 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) } /* - * Switch the PDA context. + * Switch the PDA and FPU contexts. */ prev->userrsp = read_pda(oldrsp); write_pda(oldrsp, next->userrsp); write_pda(pcurrent, next_p); + /* This must be here to ensure both math_state_restore() and + kernel_fpu_begin() work consistently. */ + unlazy_fpu(prev_p); write_pda(kernelstack, task_stack_page(next_p) + THREAD_SIZE - PDA_STACKOFFSET); -- cgit v1.2.3-18-g5258 From 51f62e186b78f8743246a349b09be370c8735479 Mon Sep 17 00:00:00 2001 From: Ashok Raj Date: Sat, 25 Mar 2006 16:29:28 +0100 Subject: [PATCH] x86_64: cleanup allocating logical cpu numbers in x86_64 Minor cleanup to lend better for physical CPU hotplug. Earlier way of using num_processors as index doesnt fit if CPUs come and go. This makes the code little bit better to read, and helps physical hotplug use the same functions as boot. Reserving CPU0 for BSP is too late to be done in smp_prepare_boot_cpu(). Since logical assignments from MADT is already done via setup_arch()->acpi_boot_init()->parse lapic Signed-off-by: Ashok Raj Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/mpparse.c | 19 ++++++++----------- arch/x86_64/kernel/setup.c | 6 ++++++ 2 files changed, 14 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/mpparse.c b/arch/x86_64/kernel/mpparse.c index 9013a90b5c2..b17cf3eba35 100644 --- a/arch/x86_64/kernel/mpparse.c +++ b/arch/x86_64/kernel/mpparse.c @@ -106,11 +106,11 @@ static int __init mpf_checksum(unsigned char *mp, int len) return sum & 0xFF; } -static void __init MP_processor_info (struct mpc_config_processor *m) +static void __cpuinit MP_processor_info (struct mpc_config_processor *m) { int cpu; unsigned char ver; - static int found_bsp=0; + cpumask_t tmp_map; if (!(m->mpc_cpuflag & CPU_ENABLED)) { disabled_cpus++; @@ -133,8 +133,10 @@ static void __init MP_processor_info (struct mpc_config_processor *m) return; } - cpu = num_processors++; - + num_processors++; + cpus_complement(tmp_map, cpu_present_map); + cpu = first_cpu(tmp_map); + #if MAX_APICS < 255 if ((int)m->mpc_apicid > MAX_APICS) { printk(KERN_ERR "Processor #%d INVALID. (Max ID: %d).\n", @@ -160,12 +162,7 @@ static void __init MP_processor_info (struct mpc_config_processor *m) * entry is BSP, and so on. */ cpu = 0; - - bios_cpu_apicid[0] = m->mpc_apicid; - x86_cpu_to_apicid[0] = m->mpc_apicid; - found_bsp = 1; - } else - cpu = num_processors - found_bsp; + } bios_cpu_apicid[cpu] = m->mpc_apicid; x86_cpu_to_apicid[cpu] = m->mpc_apicid; @@ -691,7 +688,7 @@ void __init mp_register_lapic_address ( } -void __init mp_register_lapic ( +void __cpuinit mp_register_lapic ( u8 id, u8 enabled) { diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index f227d0c23dc..50cd2bbd75a 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -708,6 +708,12 @@ void __init setup_arch(char **cmdline_p) check_ioapic(); + /* + * set this early, so we dont allocate cpu0 + * if MADT list doesnt list BSP first + * mpparse.c/MP_processor_info() allocates logical cpu numbers. + */ + cpu_set(0, cpu_present_map); #ifdef CONFIG_ACPI /* * Read APIC and some other early information from ACPI tables. -- cgit v1.2.3-18-g5258 From 9ede6b0945223d1e353501f41b988a3db56b4e27 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Sat, 25 Mar 2006 16:29:31 +0100 Subject: [PATCH] x86_64: Don't need to read PIT in timer handler when PM timer is used The PM timer path through main_timer_handler doesn't need the delay variable because it figures it out in a different way. Don't try to read it from the PIT. With stopped PIT timer it is even useless. Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/time.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c index ee5ce3d3cbc..86039baaaf1 100644 --- a/arch/x86_64/kernel/time.c +++ b/arch/x86_64/kernel/time.c @@ -354,7 +354,7 @@ void main_timer_handler(struct pt_regs *regs) { static unsigned long rtc_update = 0; unsigned long tsc; - int delay, offset = 0, lost = 0; + int delay = 0, offset = 0, lost = 0; /* * Here we are in the timer irq handler. We have irqs locally disabled (so we @@ -375,7 +375,7 @@ void main_timer_handler(struct pt_regs *regs) */ offset = hpet_readl(HPET_T0_CMP) - hpet_tick; delay = hpet_readl(HPET_COUNTER) - offset; - } else { + } else if (!pmtmr_ioport) { spin_lock(&i8253_lock); outb_p(0x00, 0x43); delay = inb_p(0x40); -- cgit v1.2.3-18-g5258 From 77d910f557c44db0fa72ee856c41cdd56972cfca Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Sat, 25 Mar 2006 16:29:34 +0100 Subject: [PATCH] x86_64: Report local APIC ID when initializing CPU Makes some debugging easier. Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/setup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index 50cd2bbd75a..6ca07eaa26d 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -878,8 +878,8 @@ static void __init amd_detect_cmp(struct cpuinfo_x86 *c) } numa_set_node(cpu, node); - printk(KERN_INFO "CPU %d(%d) -> Node %d -> Core %d\n", - cpu, c->x86_max_cores, node, cpu_core_id[cpu]); + printk(KERN_INFO "CPU %d/%x(%d) -> Node %d -> Core %d\n", + cpu, apicid, c->x86_max_cores, node, cpu_core_id[cpu]); #endif #endif } -- cgit v1.2.3-18-g5258 From 85f9eebccde51e24896f31383f5b70776362e1a6 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Sat, 25 Mar 2006 16:29:37 +0100 Subject: [PATCH] x86_64: Use cpu_relax in poll loop in GART IOMMU The code waits for the GART to clear the TLB flush bit. Use cpu_relax in this time to allow hypervisors to yield the CPU in this time. Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/pci-gart.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/pci-gart.c b/arch/x86_64/kernel/pci-gart.c index 0c3f052ba6c..ebd125e968b 100644 --- a/arch/x86_64/kernel/pci-gart.c +++ b/arch/x86_64/kernel/pci-gart.c @@ -148,9 +148,12 @@ static void flush_gart(struct device *dev) if (!northbridges[i]) continue; /* Make sure the hardware actually executed the flush. */ - do { + for (;;) { pci_read_config_dword(northbridges[i], 0x9c, &w); - } while (w & 1); + if (!(w & 1)) + break; + cpu_relax(); + } } if (!flushed) printk("nothing to flush?\n"); -- cgit v1.2.3-18-g5258 From 8c914cb704a11460eec7ed2a572bb5e9bd513d24 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Sat, 25 Mar 2006 16:29:40 +0100 Subject: [PATCH] x86_64: actively synchronize vmalloc area when registering certain callbacks While the modular aspect of the respective i386 patch doesn't apply to x86-64 (as the top level page directory entry is shared between modules and the base kernel), handlers registered with register_die_notifier() are still under similar constraints for touching ioremap()ed or vmalloc()ed memory. The likelihood of this problem becoming visible is of course significantly lower, as the assigned virtual addresses would have to cross a 2**39 byte boundary. This is because the callback gets invoked (a) in the page fault path before the top level page table propagation gets carried out (hence a fault to propagate the top level page table entry/entries mapping to module's code/data would nest infinitly) and (b) in the NMI path, where nested faults must absolutely not happen, since otherwise the IRET from the nested fault re-enables NMIs, potentially resulting in nested NMI occurences. Signed-off-by: Jan Beulich Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/nmi.c | 1 + arch/x86_64/kernel/traps.c | 2 ++ arch/x86_64/mm/fault.c | 73 +++++++++++++++++++++++++++++++++++++--------- 3 files changed, 63 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/nmi.c b/arch/x86_64/kernel/nmi.c index 66c009e10ba..d9e4067faf0 100644 --- a/arch/x86_64/kernel/nmi.c +++ b/arch/x86_64/kernel/nmi.c @@ -534,6 +534,7 @@ asmlinkage __kprobes void do_nmi(struct pt_regs * regs, long error_code) void set_nmi_callback(nmi_callback_t callback) { + vmalloc_sync_all(); rcu_assign_pointer(nmi_callback, callback); } diff --git a/arch/x86_64/kernel/traps.c b/arch/x86_64/kernel/traps.c index 28d50dc540e..b25bc904d42 100644 --- a/arch/x86_64/kernel/traps.c +++ b/arch/x86_64/kernel/traps.c @@ -78,6 +78,8 @@ int register_die_notifier(struct notifier_block *nb) { int err = 0; unsigned long flags; + + vmalloc_sync_all(); spin_lock_irqsave(&die_notifier_lock, flags); err = notifier_chain_register(&die_chain, nb); spin_unlock_irqrestore(&die_notifier_lock, flags); diff --git a/arch/x86_64/mm/fault.c b/arch/x86_64/mm/fault.c index 2e7c3c8ffe0..de91e17daf6 100644 --- a/arch/x86_64/mm/fault.c +++ b/arch/x86_64/mm/fault.c @@ -264,6 +264,8 @@ static int vmalloc_fault(unsigned long address) return -1; if (pgd_none(*pgd)) set_pgd(pgd, *pgd_ref); + else + BUG_ON(pgd_page(*pgd) != pgd_page(*pgd_ref)); /* Below here mismatches are bugs because these lower tables are shared */ @@ -314,16 +316,6 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, /* get the address */ __asm__("movq %%cr2,%0":"=r" (address)); - if (notify_die(DIE_PAGE_FAULT, "page fault", regs, error_code, 14, - SIGSEGV) == NOTIFY_STOP) - return; - - if (likely(regs->eflags & X86_EFLAGS_IF)) - local_irq_enable(); - - if (unlikely(page_fault_trace)) - printk("pagefault rip:%lx rsp:%lx cs:%lu ss:%lu address %lx error %lx\n", - regs->rip,regs->rsp,regs->cs,regs->ss,address,error_code); tsk = current; mm = tsk->mm; @@ -351,10 +343,12 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, */ if (!(error_code & (PF_RSVD|PF_USER|PF_PROT)) && ((address >= VMALLOC_START && address < VMALLOC_END))) { - if (vmalloc_fault(address) < 0) - goto bad_area_nosemaphore; - return; + if (vmalloc_fault(address) >= 0) + return; } + if (notify_die(DIE_PAGE_FAULT, "page fault", regs, error_code, 14, + SIGSEGV) == NOTIFY_STOP) + return; /* * Don't take the mm semaphore here. If we fixup a prefetch * fault we could otherwise deadlock. @@ -362,6 +356,17 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, goto bad_area_nosemaphore; } + if (notify_die(DIE_PAGE_FAULT, "page fault", regs, error_code, 14, + SIGSEGV) == NOTIFY_STOP) + return; + + if (likely(regs->eflags & X86_EFLAGS_IF)) + local_irq_enable(); + + if (unlikely(page_fault_trace)) + printk("pagefault rip:%lx rsp:%lx cs:%lu ss:%lu address %lx error %lx\n", + regs->rip,regs->rsp,regs->cs,regs->ss,address,error_code); + if (unlikely(error_code & PF_RSVD)) pgtable_bad(address, regs, error_code); @@ -571,6 +576,48 @@ do_sigbus: return; } +DEFINE_SPINLOCK(pgd_lock); +struct page *pgd_list; + +void vmalloc_sync_all(void) +{ + /* Note that races in the updates of insync and start aren't + problematic: + insync can only get set bits added, and updates to start are only + improving performance (without affecting correctness if undone). */ + static DECLARE_BITMAP(insync, PTRS_PER_PGD); + static unsigned long start = VMALLOC_START & PGDIR_MASK; + unsigned long address; + + for (address = start; address <= VMALLOC_END; address += PGDIR_SIZE) { + if (!test_bit(pgd_index(address), insync)) { + const pgd_t *pgd_ref = pgd_offset_k(address); + struct page *page; + + if (pgd_none(*pgd_ref)) + continue; + spin_lock(&pgd_lock); + for (page = pgd_list; page; + page = (struct page *)page->index) { + pgd_t *pgd; + pgd = (pgd_t *)page_address(page) + pgd_index(address); + if (pgd_none(*pgd)) + set_pgd(pgd, *pgd_ref); + else + BUG_ON(pgd_page(*pgd) != pgd_page(*pgd_ref)); + } + spin_unlock(&pgd_lock); + set_bit(pgd_index(address), insync); + } + if (address == start) + start = address + PGDIR_SIZE; + } + /* Check that there is no need to do the same for the modules area. */ + BUILD_BUG_ON(!(MODULES_VADDR > __START_KERNEL)); + BUILD_BUG_ON(!(((MODULES_END - 1) & PGDIR_MASK) == + (__START_KERNEL & PGDIR_MASK))); +} + static int __init enable_pagefaulttrace(char *str) { page_fault_trace = 1; -- cgit v1.2.3-18-g5258 From 86ebcea899ff01274c1e8e15bf1d1f1cf5fac471 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Sat, 25 Mar 2006 16:29:43 +0100 Subject: [PATCH] x86_64: remove dead do_softirq_thunk Appearantly a left-over... Signed-off-by: Jan Beulich Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/x8664_ksyms.c | 3 --- arch/x86_64/lib/thunk.S | 1 - 2 files changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/x8664_ksyms.c b/arch/x86_64/kernel/x8664_ksyms.c index c9dc7e46731..365e5fbae9a 100644 --- a/arch/x86_64/kernel/x8664_ksyms.c +++ b/arch/x86_64/kernel/x8664_ksyms.c @@ -151,9 +151,6 @@ EXPORT_SYMBOL(cpu_sibling_map); EXPORT_SYMBOL(smp_num_siblings); #endif -extern void do_softirq_thunk(void); -EXPORT_SYMBOL(do_softirq_thunk); - #ifdef CONFIG_BUG EXPORT_SYMBOL(out_of_line_bug); #endif diff --git a/arch/x86_64/lib/thunk.S b/arch/x86_64/lib/thunk.S index acc1e2ca7ed..e49af0032e9 100644 --- a/arch/x86_64/lib/thunk.S +++ b/arch/x86_64/lib/thunk.S @@ -42,7 +42,6 @@ thunk rwsem_wake_thunk,rwsem_wake thunk rwsem_downgrade_thunk,rwsem_downgrade_wake #endif - thunk do_softirq_thunk,do_softirq thunk __down_failed,__down thunk_retrax __down_failed_interruptible,__down_interruptible -- cgit v1.2.3-18-g5258 From 681558fdb5848f0a6dc248108f0f7323f7380857 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Sat, 25 Mar 2006 16:29:46 +0100 Subject: [PATCH] x86_64: Check that early arguments are words on their own We've always had the problem that arguments only did a prefix match, which resulted e.g. in noapic and noapictimer getting confused. Fix the early argument parsing code to always check that arguments are whole words (except for those that take additional arguments of course) I factored out the checking code for that while also makes the code easier to maintain. Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/setup.c | 47 ++++++++++++++++++++++++---------------------- 1 file changed, 25 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index 6ca07eaa26d..01e2de4d254 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -46,6 +46,7 @@ #include #include #include +#include #include #include @@ -270,6 +271,13 @@ static void __init probe_roms(void) } } +/* Check for full argument with no trailing characters */ +static int fullarg(char *p, char *arg) +{ + int l = strlen(arg); + return !memcmp(p, arg, l) && (p[l] == 0 || isspace(p[l])); +} + static __init void parse_cmdline_early (char ** cmdline_p) { char c = ' ', *to = command_line, *from = COMMAND_LINE; @@ -293,10 +301,10 @@ static __init void parse_cmdline_early (char ** cmdline_p) #endif #ifdef CONFIG_ACPI /* "acpi=off" disables both ACPI table parsing and interpreter init */ - if (!memcmp(from, "acpi=off", 8)) + if (fullarg(from,"acpi=off")) disable_acpi(); - if (!memcmp(from, "acpi=force", 10)) { + if (fullarg(from, "acpi=force")) { /* add later when we do DMI horrors: */ acpi_force = 1; acpi_disabled = 0; @@ -304,52 +312,47 @@ static __init void parse_cmdline_early (char ** cmdline_p) /* acpi=ht just means: do ACPI MADT parsing at bootup, but don't enable the full ACPI interpreter */ - if (!memcmp(from, "acpi=ht", 7)) { + if (fullarg(from, "acpi=ht")) { if (!acpi_force) disable_acpi(); acpi_ht = 1; } - else if (!memcmp(from, "pci=noacpi", 10)) + else if (fullarg(from, "pci=noacpi")) acpi_disable_pci(); - else if (!memcmp(from, "acpi=noirq", 10)) + else if (fullarg(from, "acpi=noirq")) acpi_noirq_set(); - else if (!memcmp(from, "acpi_sci=edge", 13)) + else if (fullarg(from, "acpi_sci=edge")) acpi_sci_flags.trigger = 1; - else if (!memcmp(from, "acpi_sci=level", 14)) + else if (fullarg(from, "acpi_sci=level")) acpi_sci_flags.trigger = 3; - else if (!memcmp(from, "acpi_sci=high", 13)) + else if (fullarg(from, "acpi_sci=high")) acpi_sci_flags.polarity = 1; - else if (!memcmp(from, "acpi_sci=low", 12)) + else if (fullarg(from, "acpi_sci=low")) acpi_sci_flags.polarity = 3; /* acpi=strict disables out-of-spec workarounds */ - else if (!memcmp(from, "acpi=strict", 11)) { + else if (fullarg(from, "acpi=strict")) { acpi_strict = 1; } #ifdef CONFIG_X86_IO_APIC - else if (!memcmp(from, "acpi_skip_timer_override", 24)) + else if (fullarg(from, "acpi_skip_timer_override")) acpi_skip_timer_override = 1; #endif #endif - if (!memcmp(from, "disable_timer_pin_1", 19)) + if (fullarg(from, "disable_timer_pin_1")) disable_timer_pin_1 = 1; - if (!memcmp(from, "enable_timer_pin_1", 18)) + if (fullarg(from, "enable_timer_pin_1")) disable_timer_pin_1 = -1; - if (!memcmp(from, "nolapic", 7) || - !memcmp(from, "disableapic", 11)) + if (fullarg(from, "nolapic") || fullarg(from, "disableapic")) disable_apic = 1; - /* Don't confuse with noapictimer */ - if (!memcmp(from, "noapic", 6) && - (from[6] == ' ' || from[6] == 0)) + if (fullarg(from, "noapic")) skip_ioapic_setup = 1; - /* Make sure to not confuse with apic= */ - if (!memcmp(from, "apic", 4) && - (from[4] == ' ' || from[4] == 0)) { + if (fullarg(from,"apic")) { skip_ioapic_setup = 0; ioapic_force = 1; } @@ -388,7 +391,7 @@ static __init void parse_cmdline_early (char ** cmdline_p) iommu_setup(from+6); } - if (!memcmp(from,"oops=panic", 10)) + if (fullarg(from,"oops=panic")) panic_on_oops = 1; if (!memcmp(from, "noexec=", 7)) -- cgit v1.2.3-18-g5258 From 6edfba1b33c701108717f4e036320fc39abe1912 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Sat, 25 Mar 2006 16:29:49 +0100 Subject: [PATCH] x86_64: Don't define string functions to builtin gcc should handle this anyways, and it causes problems when sprintf is turned into strcpy by gcc behind our backs and the C fallback version of strcpy is actually defining __builtin_strcpy Then drop -ffreestanding from the main Makefile because it isn't needed anymore and implies -fno-builtin, which is wrong now. (it was only added for x86-64, so dropping it should be safe) Noticed by Roman Zippel Cc: Roman Zippel Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/i386/Makefile | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/i386/Makefile b/arch/i386/Makefile index ff6973a85c8..c848a5b3039 100644 --- a/arch/i386/Makefile +++ b/arch/i386/Makefile @@ -39,6 +39,9 @@ include $(srctree)/arch/i386/Makefile.cpu cflags-$(CONFIG_REGPARM) += -mregparm=3 +# temporary until string.h is fixed +cflags-y += -ffreestanding + # Disable unit-at-a-time mode on pre-gcc-4.0 compilers, it makes gcc use # a lot more stack due to the lack of sharing of stacklots: CFLAGS += $(shell if [ $(call cc-version) -lt 0400 ] ; then echo $(call cc-option,-fno-unit-at-a-time); fi ;) -- cgit v1.2.3-18-g5258 From 2b692a872c21849edb0a398937e31991526a9216 Mon Sep 17 00:00:00 2001 From: Roberto Nibali Date: Sat, 25 Mar 2006 16:29:55 +0100 Subject: [PATCH] x86_64: Clean up white space in traps.c Attached is a small code style cleanup patch that resulted from my skimming through the arch/x86_64/kernel/traps.c code to figure out what went haywire. Signed-off-by: Roberto Nibali Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/traps.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/traps.c b/arch/x86_64/kernel/traps.c index b25bc904d42..05dbbf40ccf 100644 --- a/arch/x86_64/kernel/traps.c +++ b/arch/x86_64/kernel/traps.c @@ -124,7 +124,7 @@ int printk_address(unsigned long address) if (!modname) modname = delim = ""; return printk("<%016lx>{%s%s%s%s%+ld}", - address,delim,modname,delim,symname,offset); + address, delim, modname, delim, symname, offset); } #else int printk_address(unsigned long address) @@ -336,13 +336,12 @@ void show_registers(struct pt_regs *regs) show_stack(NULL, (unsigned long*)rsp); printk("\nCode: "); - if(regs->rip < PAGE_OFFSET) + if (regs->rip < PAGE_OFFSET) goto bad; - for(i=0;i<20;i++) - { + for (i=0; i<20; i++) { unsigned char c; - if(__get_user(c, &((unsigned char*)regs->rip)[i])) { + if (__get_user(c, &((unsigned char*)regs->rip)[i])) { bad: printk(" Bad RIP value."); break; @@ -481,7 +480,7 @@ static void __kprobes do_trap(int trapnr, int signr, char *str, printk(KERN_INFO "%s[%d] trap %s rip:%lx rsp:%lx error:%lx\n", tsk->comm, tsk->pid, str, - regs->rip,regs->rsp,error_code); + regs->rip, regs->rsp, error_code); if (info) force_sig_info(signr, info, tsk); @@ -495,9 +494,9 @@ static void __kprobes do_trap(int trapnr, int signr, char *str, { const struct exception_table_entry *fixup; fixup = search_exception_tables(regs->rip); - if (fixup) { + if (fixup) regs->rip = fixup->fixup; - } else + else die(str, regs, error_code); return; } @@ -570,7 +569,7 @@ asmlinkage void __kprobes do_general_protection(struct pt_regs * regs, printk(KERN_INFO "%s[%d] general protection rip:%lx rsp:%lx error:%lx\n", tsk->comm, tsk->pid, - regs->rip,regs->rsp,error_code); + regs->rip, regs->rsp, error_code); force_sig(SIGSEGV, tsk); return; -- cgit v1.2.3-18-g5258 From 1f50249e940baa7133e0bdb32cd564bb3ba28456 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Sat, 25 Mar 2006 16:29:58 +0100 Subject: [PATCH] x86_64: Make pfn_valid work early in boot It needs num_physpages, so initialize it early. It's later overwritten again. Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/setup.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index 01e2de4d254..ad3b7fc24a0 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -614,6 +614,7 @@ void __init setup_arch(char **cmdline_p) * we are rounding upwards: */ end_pfn = e820_end_of_ram(); + num_physpages = end_pfn; /* for pfn_valid */ check_efer(); -- cgit v1.2.3-18-g5258 From e57113bc1ff591005ec0b0fb4885d97c01de73d8 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Sat, 25 Mar 2006 16:30:01 +0100 Subject: [PATCH] x86_64: miscellaneous cleanup - adjust limits of GDT/IDT pseudo-descriptors (some were off by one) - move empty_zero_page into .bss.page_aligned - move cpu_gdt_table into .data.page_aligned - move idt_table into .bss - align inital_code and init_rsp - eliminate pointless (re-)declaration of idt_table in traps.c Signed-off-by: Jan Beulich Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/head.S | 25 ++++++++++++++----------- arch/x86_64/kernel/setup64.c | 2 +- arch/x86_64/kernel/traps.c | 2 -- 3 files changed, 15 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/head.S b/arch/x86_64/kernel/head.S index 02fc7fa0ea2..0cddcc03842 100644 --- a/arch/x86_64/kernel/head.S +++ b/arch/x86_64/kernel/head.S @@ -192,7 +192,8 @@ startup_64: movq initial_code(%rip),%rax jmp *%rax - /* SMP bootup changes these two */ + /* SMP bootup changes these two */ + .align 8 .globl initial_code initial_code: .quad x86_64_start_kernel @@ -237,7 +238,7 @@ ENTRY(no_long_mode) .org 0xf00 .globl pGDT32 pGDT32: - .word gdt_end-cpu_gdt_table + .word gdt_end-cpu_gdt_table-1 .long cpu_gdt_table-__START_KERNEL_map .org 0xf10 @@ -293,8 +294,6 @@ NEXT_PAGE(level2_kernel_pgt) /* Module mapping starts here */ .fill 492,8,0 -NEXT_PAGE(empty_zero_page) - NEXT_PAGE(level3_physmem_pgt) .quad phys_level2_kernel_pgt | 0x007 /* so that __va works even before pagetable_init */ .fill 511,8,0 @@ -337,7 +336,7 @@ ENTRY(boot_level4_pgt) .align 16 .globl cpu_gdt_descr cpu_gdt_descr: - .word gdt_end-cpu_gdt_table + .word gdt_end-cpu_gdt_table-1 gdt: .quad cpu_gdt_table #ifdef CONFIG_SMP @@ -352,7 +351,8 @@ gdt: * Also sysret mandates a special GDT layout */ -.align PAGE_SIZE + .section .data.page_aligned, "aw" + .align PAGE_SIZE /* The TLS descriptors are currently at a different place compared to i386. Hopefully nobody expects them at a fixed place (Wine?) */ @@ -378,9 +378,12 @@ gdt_end: /* zero the remaining page */ .fill PAGE_SIZE / 8 - GDT_ENTRIES,8,0 -ENTRY(idt_table) - .rept 256 - .quad 0 - .quad 0 - .endr + .section .bss, "aw", @nobits + .align L1_CACHE_BYTES +ENTRY(idt_table) + .skip 256 * 16 + .section .bss.page_aligned, "aw", @nobits + .align PAGE_SIZE +ENTRY(empty_zero_page) + .skip PAGE_SIZE diff --git a/arch/x86_64/kernel/setup64.c b/arch/x86_64/kernel/setup64.c index 044587812b0..356b462cb0e 100644 --- a/arch/x86_64/kernel/setup64.c +++ b/arch/x86_64/kernel/setup64.c @@ -33,7 +33,7 @@ cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE; struct x8664_pda *_cpu_pda[NR_CPUS] __read_mostly; struct x8664_pda boot_cpu_pda[NR_CPUS] __cacheline_aligned; -struct desc_ptr idt_descr = { 256 * 16, (unsigned long) idt_table }; +struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table }; char boot_cpu_stack[IRQSTACKSIZE] __attribute__((section(".bss.page_aligned"))); diff --git a/arch/x86_64/kernel/traps.c b/arch/x86_64/kernel/traps.c index 05dbbf40ccf..7b148309c52 100644 --- a/arch/x86_64/kernel/traps.c +++ b/arch/x86_64/kernel/traps.c @@ -47,8 +47,6 @@ #include #include -extern struct gate_struct idt_table[256]; - asmlinkage void divide_error(void); asmlinkage void debug(void); asmlinkage void nmi(void); -- cgit v1.2.3-18-g5258 From 60c1bc82d9d42486e2b96de668b0b49fadaffd12 Mon Sep 17 00:00:00 2001 From: Ravikiran G Thirumalai Date: Sat, 25 Mar 2006 16:30:04 +0100 Subject: [PATCH] x86_64: to use lapic ids instead of initial apic ids phys_proc_id[] on AMD boxes is right now populated with the initial apic id, obtained by the cpuid instruction. But, the initial apic id need not be the local apic id on clustered APIC systems (see comment at x86_64/kernel/genapic_cluster.c, line 110). On vSMPowered with AMD CPUs the cpu_to_node will turn out to be incorrect (as apicid_to_node[] is indexed by the initial apic id rather than the local apic id). On vSMPowered boxes with Intel CPUs this is working correctly as phys_proc_id[] is initialized correctly in detect_ht(). This fixes AMD boot path according to specification, to use the correct routines for local apic id and socket ids. We use hard_smp_processor_id() to read the local apic id, and phys_pkg_id() to determine socket id for phys_proc_id[] Patch tested on Tyan multicore boxes as well as vSMPowered boxes. Signed-off-by: Ravikiran Thirumalai Signed-off-by: Shai Fultheim Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/setup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index ad3b7fc24a0..49f285871df 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -846,7 +846,7 @@ static void __init amd_detect_cmp(struct cpuinfo_x86 *c) unsigned bits; #ifdef CONFIG_NUMA int node = 0; - unsigned apicid = phys_proc_id[cpu]; + unsigned apicid = hard_smp_processor_id(); #endif bits = 0; @@ -856,7 +856,7 @@ static void __init amd_detect_cmp(struct cpuinfo_x86 *c) /* Low order bits define the core id (index of core in socket) */ cpu_core_id[cpu] = phys_proc_id[cpu] & ((1 << bits)-1); /* Convert the APIC ID into the socket ID */ - phys_proc_id[cpu] >>= bits; + phys_proc_id[cpu] = phys_pkg_id(bits); #ifdef CONFIG_NUMA node = phys_proc_id[cpu]; -- cgit v1.2.3-18-g5258 From a9ba9a3b3897561d01e04cd21433746df46548c0 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Sat, 25 Mar 2006 16:30:10 +0100 Subject: [PATCH] x86_64: prefetch the mmap_sem in the fault path In a micro-benchmark that stresses the pagefault path, the down_read_trylock on the mmap_sem showed up quite high on the profile. Turns out this lock is bouncing between cpus quite a bit and thus is cache-cold a lot. This patch prefetches the lock (for write) as early as possible (and before some other somewhat expensive operations). With this patch, the down_read_trylock basically fell out of the top of profile. Signed-off-by: Arjan van de Ven Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/mm/fault.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/mm/fault.c b/arch/x86_64/mm/fault.c index de91e17daf6..316c53de47b 100644 --- a/arch/x86_64/mm/fault.c +++ b/arch/x86_64/mm/fault.c @@ -314,11 +314,13 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, unsigned long flags; siginfo_t info; + tsk = current; + mm = tsk->mm; + prefetchw(&mm->mmap_sem); + /* get the address */ __asm__("movq %%cr2,%0":"=r" (address)); - tsk = current; - mm = tsk->mm; info.si_code = SEGV_MAPERR; -- cgit v1.2.3-18-g5258 From 04103609322daca31197068e310ba8037ecd3470 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Sat, 25 Mar 2006 16:30:13 +0100 Subject: [PATCH] x86_64: Move kernel to 2MB As suggested by Andi (and Alan), move the default kernel location from 1Mb to 2Mb, to align to the start of a TLB entry. Signed-off-by: Arjan van de Ven Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index e18eb79bf85..9fad9df8662 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -429,10 +429,10 @@ config CRASH_DUMP config PHYSICAL_START hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP) default "0x1000000" if CRASH_DUMP - default "0x100000" + default "0x200000" help This gives the physical address where the kernel is loaded. Normally - for regular kernels this value is 0x100000 (1MB). But in the case + for regular kernels this value is 0x200000 (2MB). But in the case of kexec on panic the fail safe kernel needs to run at a different address than the panic-ed kernel. This option is used to set the load address for kernels used to capture crash dump on being kexec'ed -- cgit v1.2.3-18-g5258 From e6fc99c6aba0350a3c4c0206b7047d4893491485 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Sat, 25 Mar 2006 16:30:16 +0100 Subject: [PATCH] x86_64: s/Overwrite/Override/ in arch/x86-64 s/Overwrite/Override/ Signed-off-by: Dave Jones Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/ia32/ia32_binfmt.c | 2 +- arch/x86_64/kernel/io_apic.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/ia32/ia32_binfmt.c b/arch/x86_64/ia32/ia32_binfmt.c index 572b3b28772..e776139afb2 100644 --- a/arch/x86_64/ia32/ia32_binfmt.c +++ b/arch/x86_64/ia32/ia32_binfmt.c @@ -58,7 +58,7 @@ struct elf_phdr; #define USE_ELF_CORE_DUMP 1 -/* Overwrite elfcore.h */ +/* Override elfcore.h */ #define _LINUX_ELFCORE_H 1 typedef unsigned int elf_greg_t; diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c index ffed464e6b1..f264d9dc97f 100644 --- a/arch/x86_64/kernel/io_apic.c +++ b/arch/x86_64/kernel/io_apic.c @@ -310,7 +310,7 @@ void __init check_ioapic(void) force_iommu) && !iommu_aperture_allowed) { printk(KERN_INFO - "Looks like a VIA chipset. Disabling IOMMU. Overwrite with \"iommu=allowed\"\n"); + "Looks like a VIA chipset. Disabling IOMMU. Override with \"iommu=allowed\"\n"); iommu_aperture_disabled = 1; } #endif -- cgit v1.2.3-18-g5258 From f083a329e63d471a5e9238e837772b1b76c218db Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Sat, 25 Mar 2006 16:30:19 +0100 Subject: [PATCH] x86_64: Clean up and tweak ACPI blacklist year code - Move the core parser into dmi_scan.c. It can be useful for other subsystems too. - Differentiate between field doesn't exist and field is 0 or unparseable. The first case is likely an old BIOS with broken ACPI, the later is likely a slightly buggy BIOS where someone forget to edit the date. Don't blacklist in the later case. Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/i386/kernel/dmi_scan.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'arch') diff --git a/arch/i386/kernel/dmi_scan.c b/arch/i386/kernel/dmi_scan.c index ca2a0cbcac0..d2dfd9c8d69 100644 --- a/arch/i386/kernel/dmi_scan.c +++ b/arch/i386/kernel/dmi_scan.c @@ -299,3 +299,33 @@ struct dmi_device * dmi_find_device(int type, const char *name, return NULL; } EXPORT_SYMBOL(dmi_find_device); + +/** + * dmi_get_year - Return year of a DMI date + * @field: data index (like dmi_get_system_info) + * + * Returns -1 when the field doesn't exist. 0 when it is broken. + */ +int dmi_get_year(int field) +{ + int year; + char *s = dmi_get_system_info(field); + + if (!s) + return -1; + if (*s == '\0') + return 0; + s = strrchr(s, '/'); + if (!s) + return 0; + + s += 1; + year = simple_strtoul(s, NULL, 0); + if (year && year < 100) { /* 2-digit year */ + year += 1900; + if (year < 1996) /* no dates < spec 1.0 */ + year += 100; + } + + return year; +} -- cgit v1.2.3-18-g5258 From f2d3efedbecc04dc348d723e4c90b46731b3bb48 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Sat, 25 Mar 2006 16:30:22 +0100 Subject: [PATCH] x86_64: Implement early DMI scanning There are more and more cases where we need to know DMI information early to work around bugs. i386 already had early DMI scanning, but x86-64 didn't. Implement this now. This required some cleanup in the i386 code. Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/i386/kernel/dmi_scan.c | 1 + arch/x86_64/kernel/setup.c | 16 +++++++++------- arch/x86_64/mm/init.c | 27 +++++++++++++++++++++++++++ 3 files changed, 37 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/dmi_scan.c b/arch/i386/kernel/dmi_scan.c index d2dfd9c8d69..ebc8dc116c4 100644 --- a/arch/i386/kernel/dmi_scan.c +++ b/arch/i386/kernel/dmi_scan.c @@ -5,6 +5,7 @@ #include #include #include +#include static char * __init dmi_string(struct dmi_header *dm, u8 s) { diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index 49f285871df..8acf5313e83 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -68,6 +68,7 @@ #include #include #include +#include /* * Machine setup.. @@ -92,6 +93,12 @@ int bootloader_type; unsigned long saved_video_mode; +/* + * Early DMI memory + */ +int dmi_alloc_index; +char dmi_alloc_data[DMI_MAX_DATA]; + /* * Setup options */ @@ -620,6 +627,8 @@ void __init setup_arch(char **cmdline_p) init_memory_mapping(0, (end_pfn_map << PAGE_SHIFT)); + dmi_scan_machine(); + zap_low_mappings(0); #ifdef CONFIG_ACPI @@ -1412,10 +1421,3 @@ struct seq_operations cpuinfo_op = { .show = show_cpuinfo, }; -static int __init run_dmi_scan(void) -{ - dmi_scan_machine(); - return 0; -} -core_initcall(run_dmi_scan); - diff --git a/arch/x86_64/mm/init.c b/arch/x86_64/mm/init.c index 675a4569133..54c7f5975b4 100644 --- a/arch/x86_64/mm/init.c +++ b/arch/x86_64/mm/init.c @@ -225,6 +225,33 @@ static __meminit void unmap_low_page(int i) ti->allocated = 0; } +/* Must run before zap_low_mappings */ +__init void *early_ioremap(unsigned long addr, unsigned long size) +{ + unsigned long map = round_down(addr, LARGE_PAGE_SIZE); + + /* actually usually some more */ + if (size >= LARGE_PAGE_SIZE) { + printk("SMBIOS area too long %lu\n", size); + return NULL; + } + set_pmd(temp_mappings[0].pmd, __pmd(map | _KERNPG_TABLE | _PAGE_PSE)); + map += LARGE_PAGE_SIZE; + set_pmd(temp_mappings[1].pmd, __pmd(map | _KERNPG_TABLE | _PAGE_PSE)); + __flush_tlb(); + return temp_mappings[0].address + (addr & (LARGE_PAGE_SIZE-1)); +} + +/* To avoid virtual aliases later */ +__init void early_iounmap(void *addr, unsigned long size) +{ + if ((void *)round_down((unsigned long)addr, LARGE_PAGE_SIZE) != temp_mappings[0].address) + printk("early_iounmap: bad address %p\n", addr); + set_pmd(temp_mappings[0].pmd, __pmd(0)); + set_pmd(temp_mappings[1].pmd, __pmd(0)); + __flush_tlb(); +} + static void __meminit phys_pmd_init(pmd_t *pmd, unsigned long address, unsigned long end) { -- cgit v1.2.3-18-g5258 From 5f44a669805ab2c18b347436ec5333173b821268 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Sat, 25 Mar 2006 16:30:25 +0100 Subject: [PATCH] x86_64: Add __init to fixmap functions that are only called during boot Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/mm/init.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/mm/init.c b/arch/x86_64/mm/init.c index 54c7f5975b4..b0441562544 100644 --- a/arch/x86_64/mm/init.c +++ b/arch/x86_64/mm/init.c @@ -94,7 +94,7 @@ void show_mem(void) int after_bootmem; -static void *spp_getpage(void) +static __init void *spp_getpage(void) { void *ptr; if (after_bootmem) @@ -108,7 +108,7 @@ static void *spp_getpage(void) return ptr; } -static void set_pte_phys(unsigned long vaddr, +static __init void set_pte_phys(unsigned long vaddr, unsigned long phys, pgprot_t prot) { pgd_t *pgd; @@ -157,7 +157,8 @@ static void set_pte_phys(unsigned long vaddr, } /* NOTE: this is meant to be run only at boot */ -void __set_fixmap (enum fixed_addresses idx, unsigned long phys, pgprot_t prot) +void __init +__set_fixmap (enum fixed_addresses idx, unsigned long phys, pgprot_t prot) { unsigned long address = __fix_to_virt(idx); -- cgit v1.2.3-18-g5258 From eaeae0cc985fa1df753da7edc8d02635cbc1ba39 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Sat, 25 Mar 2006 16:30:28 +0100 Subject: [PATCH] x86_64: Patch to make the head.S-must-be-first-in-vmlinux order explicit This patch puts the code from head.S in a special .bootstrap.text section. I'm working on a patch to reorder the functions in the kernel (I'll post that later), but for x86-64 at least the kernel bootstrap requires that the head.S functions are on the very first page/pages of the kernel text. This is understandable since the bootstrap is complex enough already and not a problem at all, it just means they aren't allowed to be reordered. This patch puts these special functions into a separate section to document this, and to guarantee this in the light of possibly reordering the rest later. (So this patch doesn't fix a bug per se, but makes things more robust by making the order of these functions explicit) Signed-off-by: Arjan van de Ven Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/head.S | 1 + arch/x86_64/kernel/vmlinux.lds.S | 1 + 2 files changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/x86_64/kernel/head.S b/arch/x86_64/kernel/head.S index 0cddcc03842..6df05e6034f 100644 --- a/arch/x86_64/kernel/head.S +++ b/arch/x86_64/kernel/head.S @@ -26,6 +26,7 @@ */ .text + .section .bootstrap.text .code32 .globl startup_32 /* %bx: 1 if coming from smp trampoline on secondary cpu */ diff --git a/arch/x86_64/kernel/vmlinux.lds.S b/arch/x86_64/kernel/vmlinux.lds.S index 74db0062d4a..029be20acce 100644 --- a/arch/x86_64/kernel/vmlinux.lds.S +++ b/arch/x86_64/kernel/vmlinux.lds.S @@ -20,6 +20,7 @@ SECTIONS phys_startup_64 = startup_64 - LOAD_OFFSET; _text = .; /* Text and read-only data */ .text : AT(ADDR(.text) - LOAD_OFFSET) { + *(.bootstrap.text) *(.text) SCHED_TEXT LOCK_TEXT -- cgit v1.2.3-18-g5258 From 6954bee829a037e4a3e06f7ecd7fc0466fadde41 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Sat, 25 Mar 2006 16:30:31 +0100 Subject: [PATCH] x86_64: Handle years beyond 2100 ACPIv2 has an official but optional way to get a date >2100. Use it. But all the platforms I tested didn't seem to support it. But anyways the x86-64 kernel should be ready for the 22nd century now. Actually i shouldn't care about this because I will be dead by then @) Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/time.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c index 86039baaaf1..2f7c2120657 100644 --- a/arch/x86_64/kernel/time.c +++ b/arch/x86_64/kernel/time.c @@ -517,6 +517,7 @@ static unsigned long get_cmos_time(void) unsigned int timeout = 1000000, year, mon, day, hour, min, sec; unsigned char uip = 0, this = 0; unsigned long flags; + unsigned extyear = 0; /* * The Linux interpretation of the CMOS clock register contents: When the @@ -545,6 +546,11 @@ static unsigned long get_cmos_time(void) mon = CMOS_READ(RTC_MONTH); year = CMOS_READ(RTC_YEAR); +#ifdef CONFIG_ACPI + if (acpi_fadt.revision >= FADT2_REVISION_ID && acpi_fadt.century) + extyear = CMOS_READ(acpi_fadt.century); +#endif + spin_unlock_irqrestore(&rtc_lock, flags); /* @@ -559,11 +565,17 @@ static unsigned long get_cmos_time(void) BCD_TO_BIN(mon); BCD_TO_BIN(year); - /* - * x86-64 systems only exists since 2002. - * This will work up to Dec 31, 2100 - */ - year += 2000; + if (extyear) { + BCD_TO_BIN(extyear); + year += extyear; + printk(KERN_INFO "Extended CMOS year: %d\n", extyear); + } else { + /* + * x86-64 systems only exists since 2002. + * This will work up to Dec 31, 2100 + */ + year += 2000; + } return mktime(year, mon, day, hour, min, sec); } -- cgit v1.2.3-18-g5258 From 7351c0bfe825db2239b835c771c95affe006f51c Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Sat, 25 Mar 2006 16:30:34 +0100 Subject: [PATCH] x86_64: Fix formatting in time.c Only white space changes, code should be identical Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/time.c | 94 +++++++++++++++++++++++------------------------ 1 file changed, 45 insertions(+), 49 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c index 2f7c2120657..bb6cb83450b 100644 --- a/arch/x86_64/kernel/time.c +++ b/arch/x86_64/kernel/time.c @@ -88,7 +88,8 @@ static inline unsigned int do_gettimeoffset_tsc(void) unsigned long t; unsigned long x; t = get_cycles_sync(); - if (t < vxtime.last_tsc) t = vxtime.last_tsc; /* hack */ + if (t < vxtime.last_tsc) + t = vxtime.last_tsc; /* hack */ x = ((t - vxtime.last_tsc) * vxtime.tsc_quot) >> 32; return x; } @@ -178,8 +179,9 @@ unsigned long profile_pc(struct pt_regs *regs) { unsigned long pc = instruction_pointer(regs); - /* Assume the lock function has either no stack frame or only a single word. - This checks if the address on the stack looks like a kernel text address. + /* Assume the lock function has either no stack frame or only a single + word. This checks if the address on the stack looks like a kernel + text address. There is a small window for false hits, but in that case the tick is just accounted to the spinlock function. Better would be to write these functions in assembler again @@ -293,8 +295,7 @@ unsigned long long monotonic_clock(void) this_offset = hpet_readl(HPET_COUNTER); } while (read_seqretry(&xtime_lock, seq)); offset = (this_offset - last_offset); - offset *=(NSEC_PER_SEC/HZ)/hpet_tick; - return base + offset; + offset *= (NSEC_PER_SEC/HZ) / hpet_tick; } else { do { seq = read_seqbegin(&xtime_lock); @@ -303,50 +304,46 @@ unsigned long long monotonic_clock(void) base = monotonic_base; } while (read_seqretry(&xtime_lock, seq)); this_offset = get_cycles_sync(); - offset = (this_offset - last_offset)*1000/cpu_khz; - return base + offset; + offset = (this_offset - last_offset)*1000 / cpu_khz; } + return base + offset; } EXPORT_SYMBOL(monotonic_clock); static noinline void handle_lost_ticks(int lost, struct pt_regs *regs) { - static long lost_count; - static int warned; - - if (report_lost_ticks) { - printk(KERN_WARNING "time.c: Lost %d timer " - "tick(s)! ", lost); - print_symbol("rip %s)\n", regs->rip); - } - - if (lost_count == 1000 && !warned) { - printk(KERN_WARNING - "warning: many lost ticks.\n" - KERN_WARNING "Your time source seems to be instable or " + static long lost_count; + static int warned; + if (report_lost_ticks) { + printk(KERN_WARNING "time.c: Lost %d timer tick(s)! ", lost); + print_symbol("rip %s)\n", regs->rip); + } + + if (lost_count == 1000 && !warned) { + printk(KERN_WARNING "warning: many lost ticks.\n" + KERN_WARNING "Your time source seems to be instable or " "some driver is hogging interupts\n"); - print_symbol("rip %s\n", regs->rip); - if (vxtime.mode == VXTIME_TSC && vxtime.hpet_address) { - printk(KERN_WARNING "Falling back to HPET\n"); - if (hpet_use_timer) - vxtime.last = hpet_readl(HPET_T0_CMP) - hpet_tick; - else - vxtime.last = hpet_readl(HPET_COUNTER); - vxtime.mode = VXTIME_HPET; - do_gettimeoffset = do_gettimeoffset_hpet; - } - /* else should fall back to PIT, but code missing. */ - warned = 1; - } else - lost_count++; + print_symbol("rip %s\n", regs->rip); + if (vxtime.mode == VXTIME_TSC && vxtime.hpet_address) { + printk(KERN_WARNING "Falling back to HPET\n"); + if (hpet_use_timer) + vxtime.last = hpet_readl(HPET_T0_CMP) - + hpet_tick; + else + vxtime.last = hpet_readl(HPET_COUNTER); + vxtime.mode = VXTIME_HPET; + do_gettimeoffset = do_gettimeoffset_hpet; + } + /* else should fall back to PIT, but code missing. */ + warned = 1; + } else + lost_count++; #ifdef CONFIG_CPU_FREQ - /* In some cases the CPU can change frequency without us noticing - (like going into thermal throttle) - Give cpufreq a change to catch up. */ - if ((lost_count+1) % 25 == 0) { - cpufreq_delayed_get(); - } + /* In some cases the CPU can change frequency without us noticing + Give cpufreq a change to catch up. */ + if ((lost_count+1) % 25 == 0) + cpufreq_delayed_get(); #endif } @@ -556,7 +553,7 @@ static unsigned long get_cmos_time(void) /* * We know that x86-64 always uses BCD format, no need to check the * config register. - */ + */ BCD_TO_BIN(sec); BCD_TO_BIN(min); @@ -618,7 +615,8 @@ static void cpufreq_delayed_get(void) cpufreq_delayed_issched = 1; if (!warned) { warned = 1; - printk(KERN_DEBUG "Losing some ticks... checking if CPU frequency changed.\n"); + printk(KERN_DEBUG + "Losing some ticks... checking if CPU frequency changed.\n"); } schedule_work(&cpufreq_delayed_get_work); } @@ -641,9 +639,9 @@ static int time_cpufreq_notifier(struct notifier_block *nb, unsigned long val, lpj = &dummy; if (!(freq->flags & CPUFREQ_CONST_LOOPS)) #ifdef CONFIG_SMP - lpj = &cpu_data[freq->cpu].loops_per_jiffy; + lpj = &cpu_data[freq->cpu].loops_per_jiffy; #else - lpj = &boot_cpu_data.loops_per_jiffy; + lpj = &boot_cpu_data.loops_per_jiffy; #endif if (!ref_freq) { @@ -780,9 +778,8 @@ static __init int late_hpet_init(void) int i; hpet = (struct hpet *) fix_to_virt(FIX_HPET_BASE); - - for (i = 2, timer = &hpet->hpet_timers[2]; i < ntimer; - timer++, i++) + timer = &hpet->hpet_timers[2]; + for (i = 2; i < ntimer; timer++, i++) hd.hd_irq[i] = (timer->hpet_config & Tn_INT_ROUTE_CNF_MASK) >> Tn_INT_ROUTE_CNF_SHIFT; @@ -939,8 +936,7 @@ void __init time_init(void) -xtime.tv_sec, -xtime.tv_nsec); if (!hpet_init()) - vxtime_hz = (1000000000000000L + hpet_period / 2) / - hpet_period; + vxtime_hz = (1000000000000000L + hpet_period / 2) / hpet_period; else vxtime.hpet_address = 0; -- cgit v1.2.3-18-g5258 From 28456edeff2ef9273c55cd12e4b193208717d4cd Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Sat, 25 Mar 2006 16:30:37 +0100 Subject: [PATCH] x86_64: Reename CMOS update warning Was disabled due to an old bug, long gone. Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/time.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c index bb6cb83450b..7f58fa68249 100644 --- a/arch/x86_64/kernel/time.c +++ b/arch/x86_64/kernel/time.c @@ -244,17 +244,10 @@ static void set_rtc_mmss(unsigned long nowtime) real_minutes += 30; /* correct for half hour time zone */ real_minutes %= 60; -#if 0 - /* AMD 8111 is a really bad time keeper and hits this regularly. - It probably was an attempt to avoid screwing up DST, but ignore - that for now. */ if (abs(real_minutes - cmos_minutes) >= 30) { printk(KERN_WARNING "time.c: can't update CMOS clock " "from %d to %d\n", cmos_minutes, real_minutes); - } else -#endif - - { + } else { BIN_TO_BCD(real_seconds); BIN_TO_BCD(real_minutes); CMOS_WRITE(real_seconds, RTC_SECONDS); -- cgit v1.2.3-18-g5258 From 3056d6be19b50cbd3f0290e816d702cc3e54a6f3 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Sat, 25 Mar 2006 16:30:43 +0100 Subject: [PATCH] x86_64: Don't invoke OOM killer during dma_alloc_coherent() There is a fallback logic, so it's better to not use the OOM killer in the allocations. Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/pci-dma.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/x86_64/kernel/pci-dma.c b/arch/x86_64/kernel/pci-dma.c index 4ed391edd47..03c9eeedb0f 100644 --- a/arch/x86_64/kernel/pci-dma.c +++ b/arch/x86_64/kernel/pci-dma.c @@ -73,6 +73,9 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, if (dma_mask == 0) dma_mask = 0xffffffff; + /* Don't invoke OOM killer */ + gfp |= __GFP_NORETRY; + /* Kludge to make it bug-to-bug compatible with i386. i386 uses the normal dma_mask for alloc_coherent. */ dma_mask &= *dev->dma_mask; -- cgit v1.2.3-18-g5258 From 9b2a13b963dece8d45e07692b7872ae5a075ca2a Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Sat, 25 Mar 2006 16:30:46 +0100 Subject: [PATCH] x86_64: Always use IO-APIC routing for timer. I tested it on a couple of chipsets and it worked everywhere so it should be ok as default for now. So far I haven't done the great purge of the useless old check_timer code yet though. Can be overwritten with enable_8254_timer in the worst case Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/io_apic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c index f264d9dc97f..db7db1e3650 100644 --- a/arch/x86_64/kernel/io_apic.c +++ b/arch/x86_64/kernel/io_apic.c @@ -50,7 +50,7 @@ static int no_timer_check; int disable_timer_pin_1 __initdata; -int timer_over_8254 __initdata = 1; +int timer_over_8254 __initdata = 0; /* Where if anywhere is the i8259 connect in external int mode */ static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; -- cgit v1.2.3-18-g5258 From 4bdc3b7f1b730c07f5a6ccca77ee68e044036ffc Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Sat, 25 Mar 2006 16:30:49 +0100 Subject: [PATCH] x86_64: Basic reorder infrastructure This patch puts the infrastructure in place to allow for a reordering of functions based inside the vmlinux. The general idea is that it is possible to put all "common" functions into the first 2Mb of the code, so that they are covered by one TLB entry. This as opposed to the current situation where a typical vmlinux covers about 3.5Mb (on x86-64) and thus 2 TLB entries. This is done by enabling the -ffunction-sections flag in gcc, which puts each function in its own ELF section, so that the linker can then order them in a way defined by the linker script. As per previous discussions, Linus said he wanted a "static" list for this, eg a list provided by the kernel tarbal, so that most people have the same ordering at least. A script is provided to create this list based on readprofile(1) output. The included list is provisional, and entirely biased on my own testbox and me running a few kernel compiles and some other things. I think that to get to a better list we need to invite people to submit their own profiles, and somehow add those all up and base the final list on that. I'm willing to do that effort if this is ends up being the prefered approach. Such an effort probably needs to be repeated like once a year or so to adopt to the changing nature of the kernel. Made it a CONFIG with default n because it increases link times dramatically. Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/Kconfig | 8 + arch/x86_64/Makefile | 1 + arch/x86_64/kernel/functionlist | 1286 ++++++++++++++++++++++++++++++++++++++ arch/x86_64/kernel/vmlinux.lds.S | 5 + 4 files changed, 1300 insertions(+) create mode 100644 arch/x86_64/kernel/functionlist (limited to 'arch') diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index 9fad9df8662..24a3016c079 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -464,6 +464,14 @@ config SECCOMP source kernel/Kconfig.hz +config REORDER + bool "Function reordering" + default n + help + This option enables the toolchain to reorder functions for a more + optimal TLB usage. If you have pretty much any version of binutils, + this can increase your kernel build time by roughly one minute. + endmenu # diff --git a/arch/x86_64/Makefile b/arch/x86_64/Makefile index f5e48ba9bec..0fbc0283609 100644 --- a/arch/x86_64/Makefile +++ b/arch/x86_64/Makefile @@ -36,6 +36,7 @@ CFLAGS += -m64 CFLAGS += -mno-red-zone CFLAGS += -mcmodel=kernel CFLAGS += -pipe +cflags-$(CONFIG_REORDER) += -ffunction-sections # this makes reading assembly source easier, but produces worse code # actually it makes the kernel smaller too. CFLAGS += -fno-reorder-blocks diff --git a/arch/x86_64/kernel/functionlist b/arch/x86_64/kernel/functionlist new file mode 100644 index 00000000000..2bcebdc3eed --- /dev/null +++ b/arch/x86_64/kernel/functionlist @@ -0,0 +1,1286 @@ +*(.text.flush_thread) +*(.text.check_poison_obj) +*(.text.copy_page) +*(.text.__set_personality) +*(.text.gart_map_sg) +*(.text.kmem_cache_free) +*(.text.find_get_page) +*(.text._raw_spin_lock) +*(.text.ide_outb) +*(.text.unmap_vmas) +*(.text.copy_page_range) +*(.text.kprobe_handler) +*(.text.__handle_mm_fault) +*(.text.__d_lookup) +*(.text.copy_user_generic) +*(.text.__link_path_walk) +*(.text.get_page_from_freelist) +*(.text.kmem_cache_alloc) +*(.text.drive_cmd_intr) +*(.text.ia32_setup_sigcontext) +*(.text.huge_pte_offset) +*(.text.do_page_fault) +*(.text.page_remove_rmap) +*(.text.release_pages) +*(.text.ide_end_request) +*(.text.__mutex_lock_slowpath) +*(.text.__find_get_block) +*(.text.kfree) +*(.text.vfs_read) +*(.text._raw_spin_unlock) +*(.text.free_hot_cold_page) +*(.text.fget_light) +*(.text.schedule) +*(.text.memcmp) +*(.text.touch_atime) +*(.text.__might_sleep) +*(.text.__down_read_trylock) +*(.text.arch_pick_mmap_layout) +*(.text.find_vma) +*(.text.__make_request) +*(.text.do_generic_mapping_read) +*(.text.mutex_lock_interruptible) +*(.text.__generic_file_aio_read) +*(.text._atomic_dec_and_lock) +*(.text.__wake_up_bit) +*(.text.add_to_page_cache) +*(.text.cache_alloc_debugcheck_after) +*(.text.vm_normal_page) +*(.text.mutex_debug_check_no_locks_freed) +*(.text.net_rx_action) +*(.text.__find_first_zero_bit) +*(.text.put_page) +*(.text._raw_read_lock) +*(.text.__delay) +*(.text.dnotify_parent) +*(.text.do_path_lookup) +*(.text.do_sync_read) +*(.text.do_lookup) +*(.text.bit_waitqueue) +*(.text.file_read_actor) +*(.text.strncpy_from_user) +*(.text.__pagevec_lru_add_active) +*(.text.fget) +*(.text.dput) +*(.text.__strnlen_user) +*(.text.inotify_inode_queue_event) +*(.text.rw_verify_area) +*(.text.ide_intr) +*(.text.inotify_dentry_parent_queue_event) +*(.text.permission) +*(.text.memscan) +*(.text.hpet_rtc_interrupt) +*(.text.do_mmap_pgoff) +*(.text.current_fs_time) +*(.text.vfs_getattr) +*(.text.kmem_flagcheck) +*(.text.mark_page_accessed) +*(.text.free_pages_and_swap_cache) +*(.text.generic_fillattr) +*(.text.__block_prepare_write) +*(.text.__set_page_dirty_nobuffers) +*(.text.link_path_walk) +*(.text.find_get_pages_tag) +*(.text.ide_do_request) +*(.text.__alloc_pages) +*(.text.generic_permission) +*(.text.mod_page_state_offset) +*(.text.free_pgd_range) +*(.text.generic_file_buffered_write) +*(.text.number) +*(.text.ide_do_rw_disk) +*(.text.__brelse) +*(.text.__mod_page_state_offset) +*(.text.rotate_reclaimable_page) +*(.text.find_vma_prepare) +*(.text.find_vma_prev) +*(.text.lru_cache_add_active) +*(.text.__kmalloc_track_caller) +*(.text.smp_invalidate_interrupt) +*(.text.handle_IRQ_event) +*(.text.__find_get_block_slow) +*(.text.do_wp_page) +*(.text.do_select) +*(.text.set_user_nice) +*(.text.sys_read) +*(.text.do_munmap) +*(.text.csum_partial) +*(.text.__do_softirq) +*(.text.may_open) +*(.text.getname) +*(.text.get_empty_filp) +*(.text.__fput) +*(.text.remove_mapping) +*(.text.filp_ctor) +*(.text.poison_obj) +*(.text.unmap_region) +*(.text.test_set_page_writeback) +*(.text.__do_page_cache_readahead) +*(.text.sock_def_readable) +*(.text.ide_outl) +*(.text.shrink_zone) +*(.text.rb_insert_color) +*(.text.get_request) +*(.text.sys_pread64) +*(.text.spin_bug) +*(.text.ide_outsl) +*(.text.mask_and_ack_8259A) +*(.text.filemap_nopage) +*(.text.page_add_file_rmap) +*(.text.find_lock_page) +*(.text.tcp_poll) +*(.text.__mark_inode_dirty) +*(.text.file_ra_state_init) +*(.text.generic_file_llseek) +*(.text.__pagevec_lru_add) +*(.text.page_cache_readahead) +*(.text.n_tty_receive_buf) +*(.text.zonelist_policy) +*(.text.vma_adjust) +*(.text.test_clear_page_dirty) +*(.text.sync_buffer) +*(.text.do_exit) +*(.text.__bitmap_weight) +*(.text.alloc_pages_current) +*(.text.get_unused_fd) +*(.text.zone_watermark_ok) +*(.text.cpuset_update_task_memory_state) +*(.text.__bitmap_empty) +*(.text.sys_munmap) +*(.text.__inode_dir_notify) +*(.text.__generic_file_aio_write_nolock) +*(.text.__pte_alloc) +*(.text.sys_select) +*(.text.vm_acct_memory) +*(.text.vfs_write) +*(.text.__lru_add_drain) +*(.text.prio_tree_insert) +*(.text.generic_file_aio_read) +*(.text.vma_merge) +*(.text.block_write_full_page) +*(.text.__page_set_anon_rmap) +*(.text.apic_timer_interrupt) +*(.text.release_console_sem) +*(.text.sys_write) +*(.text.sys_brk) +*(.text.dup_mm) +*(.text.read_current_timer) +*(.text.ll_rw_block) +*(.text.blk_rq_map_sg) +*(.text.dbg_userword) +*(.text.__block_commit_write) +*(.text.cache_grow) +*(.text.copy_strings) +*(.text.release_task) +*(.text.do_sync_write) +*(.text.unlock_page) +*(.text.load_elf_binary) +*(.text.__follow_mount) +*(.text.__getblk) +*(.text.do_sys_open) +*(.text.current_kernel_time) +*(.text.call_rcu) +*(.text.write_chan) +*(.text.vsnprintf) +*(.text.dummy_inode_setsecurity) +*(.text.submit_bh) +*(.text.poll_freewait) +*(.text.bio_alloc_bioset) +*(.text.skb_clone) +*(.text.page_waitqueue) +*(.text.__mutex_lock_interruptible_slowpath) +*(.text.get_index) +*(.text.csum_partial_copy_generic) +*(.text.bad_range) +*(.text.remove_vma) +*(.text.cp_new_stat) +*(.text.alloc_arraycache) +*(.text.test_clear_page_writeback) +*(.text.strsep) +*(.text.open_namei) +*(.text._raw_read_unlock) +*(.text.get_vma_policy) +*(.text.__down_write_trylock) +*(.text.find_get_pages) +*(.text.tcp_rcv_established) +*(.text.generic_make_request) +*(.text.__block_write_full_page) +*(.text.cfq_set_request) +*(.text.sys_inotify_init) +*(.text.split_vma) +*(.text.__mod_timer) +*(.text.get_options) +*(.text.vma_link) +*(.text.mpage_writepages) +*(.text.truncate_complete_page) +*(.text.tcp_recvmsg) +*(.text.sigprocmask) +*(.text.filemap_populate) +*(.text.sys_close) +*(.text.inotify_dev_queue_event) +*(.text.do_task_stat) +*(.text.__dentry_open) +*(.text.unlink_file_vma) +*(.text.__pollwait) +*(.text.packet_rcv_spkt) +*(.text.drop_buffers) +*(.text.free_pgtables) +*(.text.generic_file_direct_write) +*(.text.copy_process) +*(.text.netif_receive_skb) +*(.text.dnotify_flush) +*(.text.print_bad_pte) +*(.text.anon_vma_unlink) +*(.text.sys_mprotect) +*(.text.sync_sb_inodes) +*(.text.find_inode_fast) +*(.text.dummy_inode_readlink) +*(.text.putname) +*(.text.init_smp_flush) +*(.text.dbg_redzone2) +*(.text.sk_run_filter) +*(.text.may_expand_vm) +*(.text.generic_file_aio_write) +*(.text.find_next_zero_bit) +*(.text.file_kill) +*(.text.audit_getname) +*(.text.arch_unmap_area_topdown) +*(.text.alloc_page_vma) +*(.text.tcp_transmit_skb) +*(.text.rb_next) +*(.text.dbg_redzone1) +*(.text.generic_file_mmap) +*(.text.vfs_fstat) +*(.text.sys_time) +*(.text.page_lock_anon_vma) +*(.text.get_unmapped_area) +*(.text.remote_llseek) +*(.text.__up_read) +*(.text.fd_install) +*(.text.eventpoll_init_file) +*(.text.dma_alloc_coherent) +*(.text.create_empty_buffers) +*(.text.__mutex_unlock_slowpath) +*(.text.dup_fd) +*(.text.d_alloc) +*(.text.tty_ldisc_try) +*(.text.sys_stime) +*(.text.__rb_rotate_right) +*(.text.d_validate) +*(.text.rb_erase) +*(.text.path_release) +*(.text.memmove) +*(.text.invalidate_complete_page) +*(.text.clear_inode) +*(.text.cache_estimate) +*(.text.alloc_buffer_head) +*(.text.smp_call_function_interrupt) +*(.text.flush_tlb_others) +*(.text.file_move) +*(.text.balance_dirty_pages_ratelimited) +*(.text.vma_prio_tree_add) +*(.text.timespec_trunc) +*(.text.mempool_alloc) +*(.text.iget_locked) +*(.text.d_alloc_root) +*(.text.cpuset_populate_dir) +*(.text.anon_vma_prepare) +*(.text.sys_newstat) +*(.text.alloc_page_interleave) +*(.text.__path_lookup_intent_open) +*(.text.__pagevec_free) +*(.text.inode_init_once) +*(.text.free_vfsmnt) +*(.text.__user_walk_fd) +*(.text.cfq_idle_slice_timer) +*(.text.sys_mmap) +*(.text.sys_llseek) +*(.text.prio_tree_remove) +*(.text.filp_close) +*(.text.file_permission) +*(.text.vma_prio_tree_remove) +*(.text.tcp_ack) +*(.text.nameidata_to_filp) +*(.text.sys_lseek) +*(.text.percpu_counter_mod) +*(.text.igrab) +*(.text.__bread) +*(.text.alloc_inode) +*(.text.filldir) +*(.text.__rb_rotate_left) +*(.text.irq_affinity_write_proc) +*(.text.init_request_from_bio) +*(.text.find_or_create_page) +*(.text.tty_poll) +*(.text.tcp_sendmsg) +*(.text.ide_wait_stat) +*(.text.free_buffer_head) +*(.text.flush_signal_handlers) +*(.text.tcp_v4_rcv) +*(.text.nr_blockdev_pages) +*(.text.locks_remove_flock) +*(.text.__iowrite32_copy) +*(.text.do_filp_open) +*(.text.try_to_release_page) +*(.text.page_add_new_anon_rmap) +*(.text.kmem_cache_size) +*(.text.eth_type_trans) +*(.text.try_to_free_buffers) +*(.text.schedule_tail) +*(.text.proc_lookup) +*(.text.no_llseek) +*(.text.kfree_skbmem) +*(.text.do_wait) +*(.text.do_mpage_readpage) +*(.text.vfs_stat_fd) +*(.text.tty_write) +*(.text.705) +*(.text.sync_page) +*(.text.__remove_shared_vm_struct) +*(.text.__kfree_skb) +*(.text.sock_poll) +*(.text.get_request_wait) +*(.text.do_sigaction) +*(.text.do_brk) +*(.text.tcp_event_data_recv) +*(.text.read_chan) +*(.text.pipe_writev) +*(.text.__emul_lookup_dentry) +*(.text.rtc_get_rtc_time) +*(.text.print_objinfo) +*(.text.file_update_time) +*(.text.do_signal) +*(.text.disable_8259A_irq) +*(.text.blk_queue_bounce) +*(.text.__anon_vma_link) +*(.text.__vma_link) +*(.text.vfs_rename) +*(.text.sys_newlstat) +*(.text.sys_newfstat) +*(.text.sys_mknod) +*(.text.__show_regs) +*(.text.iput) +*(.text.get_signal_to_deliver) +*(.text.flush_tlb_page) +*(.text.debug_mutex_wake_waiter) +*(.text.copy_thread) +*(.text.clear_page_dirty_for_io) +*(.text.buffer_io_error) +*(.text.vfs_permission) +*(.text.truncate_inode_pages_range) +*(.text.sys_recvfrom) +*(.text.remove_suid) +*(.text.mark_buffer_dirty) +*(.text.local_bh_enable) +*(.text.get_zeroed_page) +*(.text.get_vmalloc_info) +*(.text.flush_old_exec) +*(.text.dummy_inode_permission) +*(.text.__bio_add_page) +*(.text.prio_tree_replace) +*(.text.notify_change) +*(.text.mntput_no_expire) +*(.text.fput) +*(.text.__end_that_request_first) +*(.text.wake_up_bit) +*(.text.unuse_mm) +*(.text.skb_release_data) +*(.text.shrink_icache_memory) +*(.text.sched_balance_self) +*(.text.__pmd_alloc) +*(.text.pipe_poll) +*(.text.normal_poll) +*(.text.__free_pages) +*(.text.follow_mount) +*(.text.cdrom_start_packet_command) +*(.text.blk_recount_segments) +*(.text.bio_put) +*(.text.__alloc_skb) +*(.text.__wake_up) +*(.text.vm_stat_account) +*(.text.sys_fcntl) +*(.text.sys_fadvise64) +*(.text._raw_write_unlock) +*(.text.__pud_alloc) +*(.text.alloc_page_buffers) +*(.text.vfs_llseek) +*(.text.sockfd_lookup) +*(.text._raw_write_lock) +*(.text.put_compound_page) +*(.text.prune_dcache) +*(.text.pipe_readv) +*(.text.mempool_free) +*(.text.make_ahead_window) +*(.text.lru_add_drain) +*(.text.constant_test_bit) +*(.text.__clear_user) +*(.text.arch_unmap_area) +*(.text.anon_vma_link) +*(.text.sys_chroot) +*(.text.setup_arg_pages) +*(.text.radix_tree_preload) +*(.text.init_rwsem) +*(.text.generic_osync_inode) +*(.text.generic_delete_inode) +*(.text.do_sys_poll) +*(.text.dev_queue_xmit) +*(.text.default_llseek) +*(.text.__writeback_single_inode) +*(.text.vfs_ioctl) +*(.text.__up_write) +*(.text.unix_poll) +*(.text.sys_rt_sigprocmask) +*(.text.sock_recvmsg) +*(.text.recalc_bh_state) +*(.text.__put_unused_fd) +*(.text.process_backlog) +*(.text.locks_remove_posix) +*(.text.lease_modify) +*(.text.expand_files) +*(.text.end_buffer_read_nobh) +*(.text.d_splice_alias) +*(.text.debug_mutex_init_waiter) +*(.text.copy_from_user) +*(.text.cap_vm_enough_memory) +*(.text.show_vfsmnt) +*(.text.release_sock) +*(.text.pfifo_fast_enqueue) +*(.text.half_md4_transform) +*(.text.fs_may_remount_ro) +*(.text.do_fork) +*(.text.copy_hugetlb_page_range) +*(.text.cache_free_debugcheck) +*(.text.__tcp_select_window) +*(.text.task_handoff_register) +*(.text.sys_open) +*(.text.strlcpy) +*(.text.skb_copy_datagram_iovec) +*(.text.set_up_list3s) +*(.text.release_open_intent) +*(.text.qdisc_restart) +*(.text.n_tty_chars_in_buffer) +*(.text.inode_change_ok) +*(.text.__downgrade_write) +*(.text.debug_mutex_unlock) +*(.text.add_timer_randomness) +*(.text.sock_common_recvmsg) +*(.text.set_bh_page) +*(.text.printk_lock) +*(.text.path_release_on_umount) +*(.text.ip_output) +*(.text.ide_build_dmatable) +*(.text.__get_user_8) +*(.text.end_buffer_read_sync) +*(.text.__d_path) +*(.text.d_move) +*(.text.del_timer) +*(.text.constant_test_bit) +*(.text.blockable_page_cache_readahead) +*(.text.tty_read) +*(.text.sys_readlink) +*(.text.sys_faccessat) +*(.text.read_swap_cache_async) +*(.text.pty_write_room) +*(.text.page_address_in_vma) +*(.text.kthread) +*(.text.cfq_exit_io_context) +*(.text.__tcp_push_pending_frames) +*(.text.sys_pipe) +*(.text.submit_bio) +*(.text.pid_revalidate) +*(.text.page_referenced_file) +*(.text.lock_sock) +*(.text.get_page_state_node) +*(.text.generic_block_bmap) +*(.text.do_setitimer) +*(.text.dev_queue_xmit_nit) +*(.text.copy_from_read_buf) +*(.text.__const_udelay) +*(.text.console_conditional_schedule) +*(.text.wake_up_new_task) +*(.text.wait_for_completion_interruptible) +*(.text.tcp_rcv_rtt_update) +*(.text.sys_mlockall) +*(.text.set_fs_altroot) +*(.text.schedule_timeout) +*(.text.nr_free_pagecache_pages) +*(.text.nf_iterate) +*(.text.mapping_tagged) +*(.text.ip_queue_xmit) +*(.text.ip_local_deliver) +*(.text.follow_page) +*(.text.elf_map) +*(.text.dummy_file_permission) +*(.text.dispose_list) +*(.text.dentry_open) +*(.text.dentry_iput) +*(.text.bio_alloc) +*(.text.alloc_skb_from_cache) +*(.text.wait_on_page_bit) +*(.text.vfs_readdir) +*(.text.vfs_lstat) +*(.text.seq_escape) +*(.text.__posix_lock_file) +*(.text.mm_release) +*(.text.kref_put) +*(.text.ip_rcv) +*(.text.__iget) +*(.text.free_pages) +*(.text.find_mergeable_anon_vma) +*(.text.find_extend_vma) +*(.text.dummy_inode_listsecurity) +*(.text.bio_add_page) +*(.text.__vm_enough_memory) +*(.text.vfs_stat) +*(.text.tty_paranoia_check) +*(.text.tcp_read_sock) +*(.text.tcp_data_queue) +*(.text.sys_uname) +*(.text.sys_renameat) +*(.text.__strncpy_from_user) +*(.text.__mutex_init) +*(.text.__lookup_hash) +*(.text.kref_get) +*(.text.ip_route_input) +*(.text.__insert_inode_hash) +*(.text.do_sock_write) +*(.text.blk_done_softirq) +*(.text.__wake_up_sync) +*(.text.__vma_link_rb) +*(.text.tty_ioctl) +*(.text.tracesys) +*(.text.sys_getdents) +*(.text.sys_dup) +*(.text.stub_execve) +*(.text.sha_transform) +*(.text.radix_tree_tag_clear) +*(.text.put_unused_fd) +*(.text.put_files_struct) +*(.text.mpage_readpages) +*(.text.may_delete) +*(.text.kmem_cache_create) +*(.text.ip_mc_output) +*(.text.interleave_nodes) +*(.text.groups_search) +*(.text.generic_drop_inode) +*(.text.generic_commit_write) +*(.text.fcntl_setlk) +*(.text.exit_mmap) +*(.text.end_page_writeback) +*(.text.__d_rehash) +*(.text.debug_mutex_free_waiter) +*(.text.csum_ipv6_magic) +*(.text.count) +*(.text.cleanup_rbuf) +*(.text.check_spinlock_acquired_node) +*(.text.can_vma_merge_after) +*(.text.bio_endio) +*(.text.alloc_pidmap) +*(.text.write_ldt) +*(.text.vmtruncate_range) +*(.text.vfs_create) +*(.text.__user_walk) +*(.text.update_send_head) +*(.text.unmap_underlying_metadata) +*(.text.tty_ldisc_deref) +*(.text.tcp_setsockopt) +*(.text.tcp_send_ack) +*(.text.sys_pause) +*(.text.sys_gettimeofday) +*(.text.sync_dirty_buffer) +*(.text.strncmp) +*(.text.release_posix_timer) +*(.text.proc_file_read) +*(.text.prepare_to_wait) +*(.text.locks_mandatory_locked) +*(.text.interruptible_sleep_on_timeout) +*(.text.inode_sub_bytes) +*(.text.in_group_p) +*(.text.hrtimer_try_to_cancel) +*(.text.filldir64) +*(.text.fasync_helper) +*(.text.dummy_sb_pivotroot) +*(.text.d_lookup) +*(.text.d_instantiate) +*(.text.__d_find_alias) +*(.text.cpu_idle_wait) +*(.text.cond_resched_lock) +*(.text.chown_common) +*(.text.blk_congestion_wait) +*(.text.activate_page) +*(.text.unlock_buffer) +*(.text.tty_wakeup) +*(.text.tcp_v4_do_rcv) +*(.text.tcp_current_mss) +*(.text.sys_openat) +*(.text.sys_fchdir) +*(.text.strnlen_user) +*(.text.strnlen) +*(.text.strchr) +*(.text.sock_common_getsockopt) +*(.text.skb_checksum) +*(.text.remove_wait_queue) +*(.text.rb_replace_node) +*(.text.radix_tree_node_ctor) +*(.text.pty_chars_in_buffer) +*(.text.profile_hit) +*(.text.prio_tree_left) +*(.text.pgd_clear_bad) +*(.text.pfifo_fast_dequeue) +*(.text.page_referenced) +*(.text.open_exec) +*(.text.mmput) +*(.text.mm_init) +*(.text.__ide_dma_off_quietly) +*(.text.ide_dma_intr) +*(.text.hrtimer_start) +*(.text.get_io_context) +*(.text.__get_free_pages) +*(.text.find_first_zero_bit) +*(.text.file_free_rcu) +*(.text.dummy_socket_sendmsg) +*(.text.do_unlinkat) +*(.text.do_arch_prctl) +*(.text.destroy_inode) +*(.text.can_vma_merge_before) +*(.text.block_sync_page) +*(.text.block_prepare_write) +*(.text.bio_init) +*(.text.arch_ptrace) +*(.text.wake_up_inode) +*(.text.wait_on_retry_sync_kiocb) +*(.text.vma_prio_tree_next) +*(.text.tcp_rcv_space_adjust) +*(.text.__tcp_ack_snd_check) +*(.text.sys_utime) +*(.text.sys_recvmsg) +*(.text.sys_mremap) +*(.text.sys_bdflush) +*(.text.sleep_on) +*(.text.set_page_dirty_lock) +*(.text.seq_path) +*(.text.schedule_timeout_interruptible) +*(.text.sched_fork) +*(.text.rt_run_flush) +*(.text.profile_munmap) +*(.text.prepare_binprm) +*(.text.__pagevec_release_nonlru) +*(.text.m_show) +*(.text.lookup_mnt) +*(.text.__lookup_mnt) +*(.text.lock_timer_base) +*(.text.is_subdir) +*(.text.invalidate_bh_lru) +*(.text.init_buffer_head) +*(.text.ifind_fast) +*(.text.ide_dma_start) +*(.text.__get_page_state) +*(.text.flock_to_posix_lock) +*(.text.__find_symbol) +*(.text.do_futex) +*(.text.do_execve) +*(.text.dirty_writeback_centisecs_handler) +*(.text.dev_watchdog) +*(.text.can_share_swap_page) +*(.text.blkdev_put) +*(.text.bio_get_nr_vecs) +*(.text.xfrm_compile_policy) +*(.text.vma_prio_tree_insert) +*(.text.vfs_lstat_fd) +*(.text.__user_path_lookup_open) +*(.text.thread_return) +*(.text.tcp_send_delayed_ack) +*(.text.sock_def_error_report) +*(.text.shrink_slab) +*(.text.serial_out) +*(.text.seq_read) +*(.text.secure_ip_id) +*(.text.search_binary_handler) +*(.text.proc_pid_unhash) +*(.text.pagevec_lookup) +*(.text.new_inode) +*(.text.memcpy_toiovec) +*(.text.locks_free_lock) +*(.text.__lock_page) +*(.text.__lock_buffer) +*(.text.load_module) +*(.text.is_bad_inode) +*(.text.invalidate_inode_buffers) +*(.text.insert_vm_struct) +*(.text.inode_setattr) +*(.text.inode_add_bytes) +*(.text.ide_read_24) +*(.text.ide_get_error_location) +*(.text.ide_do_drive_cmd) +*(.text.get_locked_pte) +*(.text.get_filesystem_list) +*(.text.generic_file_open) +*(.text.follow_down) +*(.text.find_next_bit) +*(.text.__find_first_bit) +*(.text.exit_mm) +*(.text.exec_keys) +*(.text.end_buffer_write_sync) +*(.text.end_bio_bh_io_sync) +*(.text.dummy_socket_shutdown) +*(.text.d_rehash) +*(.text.d_path) +*(.text.do_ioctl) +*(.text.dget_locked) +*(.text.copy_thread_group_keys) +*(.text.cdrom_end_request) +*(.text.cap_bprm_apply_creds) +*(.text.blk_rq_bio_prep) +*(.text.__bitmap_intersects) +*(.text.bio_phys_segments) +*(.text.bio_free) +*(.text.arch_get_unmapped_area_topdown) +*(.text.writeback_in_progress) +*(.text.vfs_follow_link) +*(.text.tcp_rcv_state_process) +*(.text.tcp_check_space) +*(.text.sys_stat) +*(.text.sys_rt_sigreturn) +*(.text.sys_rt_sigaction) +*(.text.sys_remap_file_pages) +*(.text.sys_pwrite64) +*(.text.sys_fchownat) +*(.text.sys_fchmodat) +*(.text.strncat) +*(.text.strlcat) +*(.text.strcmp) +*(.text.steal_locks) +*(.text.sock_create) +*(.text.sk_stream_rfree) +*(.text.sk_stream_mem_schedule) +*(.text.skip_atoi) +*(.text.sk_alloc) +*(.text.show_stat) +*(.text.set_fs_pwd) +*(.text.set_binfmt) +*(.text.pty_unthrottle) +*(.text.proc_symlink) +*(.text.pipe_release) +*(.text.pageout) +*(.text.n_tty_write_wakeup) +*(.text.n_tty_ioctl) +*(.text.nr_free_zone_pages) +*(.text.migration_thread) +*(.text.mempool_free_slab) +*(.text.meminfo_read_proc) +*(.text.max_sane_readahead) +*(.text.lru_cache_add) +*(.text.kill_fasync) +*(.text.kernel_read) +*(.text.invalidate_mapping_pages) +*(.text.inode_has_buffers) +*(.text.init_once) +*(.text.inet_sendmsg) +*(.text.idedisk_issue_flush) +*(.text.generic_file_write) +*(.text.free_more_memory) +*(.text.__free_fdtable) +*(.text.filp_dtor) +*(.text.exit_sem) +*(.text.exit_itimers) +*(.text.error_interrupt) +*(.text.end_buffer_async_write) +*(.text.eligible_child) +*(.text.elf_map) +*(.text.dump_task_regs) +*(.text.dummy_task_setscheduler) +*(.text.dummy_socket_accept) +*(.text.dummy_file_free_security) +*(.text.__down_read) +*(.text.do_sock_read) +*(.text.do_sigaltstack) +*(.text.do_mremap) +*(.text.current_io_context) +*(.text.cpu_swap_callback) +*(.text.copy_vma) +*(.text.cap_bprm_set_security) +*(.text.blk_insert_request) +*(.text.bio_map_kern_endio) +*(.text.bio_hw_segments) +*(.text.bictcp_cong_avoid) +*(.text.add_interrupt_randomness) +*(.text.wait_for_completion) +*(.text.version_read_proc) +*(.text.unix_write_space) +*(.text.tty_ldisc_ref_wait) +*(.text.tty_ldisc_put) +*(.text.try_to_wake_up) +*(.text.tcp_v4_tw_remember_stamp) +*(.text.tcp_try_undo_dsack) +*(.text.tcp_may_send_now) +*(.text.sys_waitid) +*(.text.sys_sched_getparam) +*(.text.sys_getppid) +*(.text.sys_getcwd) +*(.text.sys_dup2) +*(.text.sys_chmod) +*(.text.sys_chdir) +*(.text.sprintf) +*(.text.sock_wfree) +*(.text.sock_aio_write) +*(.text.skb_drop_fraglist) +*(.text.skb_dequeue) +*(.text.set_close_on_exec) +*(.text.set_brk) +*(.text.seq_puts) +*(.text.SELECT_DRIVE) +*(.text.sched_exec) +*(.text.return_EIO) +*(.text.remove_from_page_cache) +*(.text.rcu_start_batch) +*(.text.__put_task_struct) +*(.text.proc_pid_readdir) +*(.text.proc_get_inode) +*(.text.prepare_to_wait_exclusive) +*(.text.pipe_wait) +*(.text.pipe_new) +*(.text.pdflush_operation) +*(.text.__pagevec_release) +*(.text.pagevec_lookup_tag) +*(.text.packet_rcv) +*(.text.n_tty_set_room) +*(.text.nr_free_pages) +*(.text.__net_timestamp) +*(.text.mpage_end_io_read) +*(.text.mod_timer) +*(.text.__memcpy) +*(.text.mb_cache_shrink_fn) +*(.text.lock_rename) +*(.text.kstrdup) +*(.text.is_ignored) +*(.text.int_very_careful) +*(.text.inotify_inode_is_dead) +*(.text.inotify_get_cookie) +*(.text.inode_get_bytes) +*(.text.init_timer) +*(.text.init_dev) +*(.text.inet_getname) +*(.text.ide_map_sg) +*(.text.__ide_dma_end) +*(.text.hrtimer_get_remaining) +*(.text.get_task_mm) +*(.text.get_random_int) +*(.text.free_pipe_info) +*(.text.filemap_write_and_wait_range) +*(.text.exit_thread) +*(.text.enter_idle) +*(.text.end_that_request_first) +*(.text.end_8259A_irq) +*(.text.dummy_file_alloc_security) +*(.text.do_group_exit) +*(.text.debug_mutex_init) +*(.text.cpuset_exit) +*(.text.cpu_idle) +*(.text.copy_semundo) +*(.text.copy_files) +*(.text.chrdev_open) +*(.text.cdrom_transfer_packet_command) +*(.text.cdrom_mode_sense) +*(.text.blk_phys_contig_segment) +*(.text.blk_get_queue) +*(.text.bio_split) +*(.text.audit_alloc) +*(.text.anon_pipe_buf_release) +*(.text.add_wait_queue_exclusive) +*(.text.add_wait_queue) +*(.text.acct_process) +*(.text.account) +*(.text.zeromap_page_range) +*(.text.yield) +*(.text.writeback_acquire) +*(.text.worker_thread) +*(.text.wait_on_page_writeback_range) +*(.text.__wait_on_buffer) +*(.text.vscnprintf) +*(.text.vmalloc_to_pfn) +*(.text.vgacon_save_screen) +*(.text.vfs_unlink) +*(.text.vfs_rmdir) +*(.text.unregister_md_personality) +*(.text.unlock_new_inode) +*(.text.unix_stream_sendmsg) +*(.text.unix_stream_recvmsg) +*(.text.unhash_process) +*(.text.udp_v4_lookup_longway) +*(.text.tty_ldisc_flush) +*(.text.tty_ldisc_enable) +*(.text.tty_hung_up_p) +*(.text.tty_buffer_free_all) +*(.text.tso_fragment) +*(.text.try_to_del_timer_sync) +*(.text.tcp_v4_err) +*(.text.tcp_unhash) +*(.text.tcp_seq_next) +*(.text.tcp_select_initial_window) +*(.text.tcp_sacktag_write_queue) +*(.text.tcp_cwnd_validate) +*(.text.sys_vhangup) +*(.text.sys_uselib) +*(.text.sys_symlink) +*(.text.sys_signal) +*(.text.sys_poll) +*(.text.sys_mount) +*(.text.sys_kill) +*(.text.sys_ioctl) +*(.text.sys_inotify_add_watch) +*(.text.sys_getuid) +*(.text.sys_getrlimit) +*(.text.sys_getitimer) +*(.text.sys_getgroups) +*(.text.sys_ftruncate) +*(.text.sysfs_lookup) +*(.text.sys_exit_group) +*(.text.stub_fork) +*(.text.sscanf) +*(.text.sock_map_fd) +*(.text.sock_get_timestamp) +*(.text.__sock_create) +*(.text.smp_call_function_single) +*(.text.sk_stop_timer) +*(.text.skb_copy_and_csum_datagram) +*(.text.__skb_checksum_complete) +*(.text.single_next) +*(.text.sigqueue_alloc) +*(.text.shrink_dcache_parent) +*(.text.select_idle_routine) +*(.text.run_workqueue) +*(.text.run_local_timers) +*(.text.remove_inode_hash) +*(.text.remove_dquot_ref) +*(.text.register_binfmt) +*(.text.read_cache_pages) +*(.text.rb_last) +*(.text.pty_open) +*(.text.proc_root_readdir) +*(.text.proc_pid_flush) +*(.text.proc_pident_lookup) +*(.text.proc_fill_super) +*(.text.proc_exe_link) +*(.text.posix_locks_deadlock) +*(.text.pipe_iov_copy_from_user) +*(.text.opost) +*(.text.nf_register_hook) +*(.text.netif_rx_ni) +*(.text.m_start) +*(.text.mpage_writepage) +*(.text.mm_alloc) +*(.text.memory_open) +*(.text.mark_buffer_async_write) +*(.text.lru_add_drain_all) +*(.text.locks_init_lock) +*(.text.locks_delete_lock) +*(.text.lock_hrtimer_base) +*(.text.load_script) +*(.text.__kill_fasync) +*(.text.ip_mc_sf_allow) +*(.text.__ioremap) +*(.text.int_with_check) +*(.text.int_sqrt) +*(.text.install_thread_keyring) +*(.text.init_page_buffers) +*(.text.inet_sock_destruct) +*(.text.idle_notifier_register) +*(.text.ide_execute_command) +*(.text.ide_end_drive_cmd) +*(.text.__ide_dma_host_on) +*(.text.hrtimer_run_queues) +*(.text.hpet_mask_rtc_irq_bit) +*(.text.__get_zone_counts) +*(.text.get_zone_counts) +*(.text.get_write_access) +*(.text.get_fs_struct) +*(.text.get_dirty_limits) +*(.text.generic_readlink) +*(.text.free_hot_page) +*(.text.finish_wait) +*(.text.find_inode) +*(.text.find_first_bit) +*(.text.__filemap_fdatawrite_range) +*(.text.__filemap_copy_from_user_iovec) +*(.text.exit_aio) +*(.text.elv_set_request) +*(.text.elv_former_request) +*(.text.dup_namespace) +*(.text.dupfd) +*(.text.dummy_socket_getsockopt) +*(.text.dummy_sb_post_mountroot) +*(.text.dummy_quotactl) +*(.text.dummy_inode_rename) +*(.text.__do_SAK) +*(.text.do_pipe) +*(.text.do_fsync) +*(.text.d_instantiate_unique) +*(.text.d_find_alias) +*(.text.deny_write_access) +*(.text.dentry_unhash) +*(.text.d_delete) +*(.text.datagram_poll) +*(.text.cpuset_fork) +*(.text.cpuid_read) +*(.text.copy_namespace) +*(.text.cond_resched) +*(.text.check_version) +*(.text.__change_page_attr) +*(.text.cfq_slab_kill) +*(.text.cfq_completed_request) +*(.text.cdrom_pc_intr) +*(.text.cdrom_decode_status) +*(.text.cap_capset_check) +*(.text.blk_put_request) +*(.text.bio_fs_destructor) +*(.text.bictcp_min_cwnd) +*(.text.alloc_chrdev_region) +*(.text.add_element) +*(.text.acct_update_integrals) +*(.text.write_boundary_block) +*(.text.writeback_release) +*(.text.writeback_inodes) +*(.text.wake_up_state) +*(.text.__wake_up_locked) +*(.text.wake_futex) +*(.text.wait_task_inactive) +*(.text.__wait_on_freeing_inode) +*(.text.wait_noreap_copyout) +*(.text.vmstat_start) +*(.text.vgacon_do_font_op) +*(.text.vfs_readv) +*(.text.vfs_quota_sync) +*(.text.update_queue) +*(.text.unshare_files) +*(.text.unmap_vm_area) +*(.text.unix_socketpair) +*(.text.unix_release_sock) +*(.text.unix_detach_fds) +*(.text.unix_create1) +*(.text.unix_bind) +*(.text.udp_sendmsg) +*(.text.udp_rcv) +*(.text.udp_queue_rcv_skb) +*(.text.uart_write) +*(.text.uart_startup) +*(.text.uart_open) +*(.text.tty_vhangup) +*(.text.tty_termios_baud_rate) +*(.text.tty_release) +*(.text.tty_ldisc_ref) +*(.text.throttle_vm_writeout) +*(.text.058) +*(.text.tcp_xmit_probe_skb) +*(.text.tcp_v4_send_check) +*(.text.tcp_v4_destroy_sock) +*(.text.tcp_sync_mss) +*(.text.tcp_snd_test) +*(.text.tcp_slow_start) +*(.text.tcp_send_fin) +*(.text.tcp_rtt_estimator) +*(.text.tcp_parse_options) +*(.text.tcp_ioctl) +*(.text.tcp_init_tso_segs) +*(.text.tcp_init_cwnd) +*(.text.tcp_getsockopt) +*(.text.tcp_fin) +*(.text.tcp_connect) +*(.text.tcp_cong_avoid) +*(.text.__tcp_checksum_complete_user) +*(.text.task_dumpable) +*(.text.sys_wait4) +*(.text.sys_utimes) +*(.text.sys_symlinkat) +*(.text.sys_socketpair) +*(.text.sys_rmdir) +*(.text.sys_readahead) +*(.text.sys_nanosleep) +*(.text.sys_linkat) +*(.text.sys_fstat) +*(.text.sysfs_readdir) +*(.text.sys_execve) +*(.text.sysenter_tracesys) +*(.text.sys_chown) +*(.text.stub_clone) +*(.text.strrchr) +*(.text.strncpy) +*(.text.stopmachine_set_state) +*(.text.sock_sendmsg) +*(.text.sock_release) +*(.text.sock_fasync) +*(.text.sock_close) +*(.text.sk_stream_write_space) +*(.text.sk_reset_timer) +*(.text.skb_split) +*(.text.skb_recv_datagram) +*(.text.skb_queue_tail) +*(.text.sk_attach_filter) +*(.text.si_swapinfo) +*(.text.simple_strtoll) +*(.text.set_termios) +*(.text.set_task_comm) +*(.text.set_shrinker) +*(.text.set_normalized_timespec) +*(.text.set_brk) +*(.text.serial_in) +*(.text.seq_printf) +*(.text.secure_dccp_sequence_number) +*(.text.rwlock_bug) +*(.text.rt_hash_code) +*(.text.__rta_fill) +*(.text.__request_resource) +*(.text.relocate_new_kernel) +*(.text.release_thread) +*(.text.release_mem) +*(.text.rb_prev) +*(.text.rb_first) +*(.text.random_poll) +*(.text.__put_super_and_need_restart) +*(.text.pty_write) +*(.text.ptrace_stop) +*(.text.proc_self_readlink) +*(.text.proc_root_lookup) +*(.text.proc_root_link) +*(.text.proc_pid_make_inode) +*(.text.proc_pid_attr_write) +*(.text.proc_lookupfd) +*(.text.proc_delete_inode) +*(.text.posix_same_owner) +*(.text.posix_block_lock) +*(.text.poll_initwait) +*(.text.pipe_write) +*(.text.pipe_read_fasync) +*(.text.pipe_ioctl) +*(.text.pdflush) +*(.text.pci_user_read_config_dword) +*(.text.page_readlink) +*(.text.null_lseek) +*(.text.nf_hook_slow) +*(.text.netlink_sock_destruct) +*(.text.netlink_broadcast) +*(.text.neigh_resolve_output) +*(.text.name_to_int) +*(.text.mwait_idle) +*(.text.mutex_trylock) +*(.text.mutex_debug_check_no_locks_held) +*(.text.m_stop) +*(.text.mpage_end_io_write) +*(.text.mpage_alloc) +*(.text.move_page_tables) +*(.text.mounts_open) +*(.text.__memset) +*(.text.memcpy_fromiovec) +*(.text.make_8259A_irq) +*(.text.lookup_user_key_possessed) +*(.text.lookup_create) +*(.text.locks_insert_lock) +*(.text.locks_alloc_lock) +*(.text.kthread_should_stop) +*(.text.kswapd) +*(.text.kobject_uevent) +*(.text.kobject_get_path) +*(.text.kobject_get) +*(.text.klist_children_put) +*(.text.__ip_route_output_key) +*(.text.ip_flush_pending_frames) +*(.text.ip_compute_csum) +*(.text.ip_append_data) +*(.text.ioc_set_batching) +*(.text.invalidate_inode_pages) +*(.text.__invalidate_device) +*(.text.install_arg_page) +*(.text.in_sched_functions) +*(.text.inotify_unmount_inodes) +*(.text.init_once) +*(.text.init_cdrom_command) +*(.text.inet_stream_connect) +*(.text.inet_sk_rebuild_header) +*(.text.inet_csk_addr2sockaddr) +*(.text.inet_create) +*(.text.ifind) +*(.text.ide_setup_dma) +*(.text.ide_outsw) +*(.text.ide_fixstring) +*(.text.ide_dma_setup) +*(.text.ide_cdrom_packet) +*(.text.ide_cd_put) +*(.text.ide_build_sglist) +*(.text.i8259A_shutdown) +*(.text.hung_up_tty_ioctl) +*(.text.hrtimer_nanosleep) +*(.text.hrtimer_init) +*(.text.hrtimer_cancel) +*(.text.hash_futex) +*(.text.group_send_sig_info) +*(.text.grab_cache_page_nowait) +*(.text.get_wchan) +*(.text.get_stack) +*(.text.get_page_state) +*(.text.getnstimeofday) +*(.text.get_node) +*(.text.get_kprobe) +*(.text.generic_unplug_device) +*(.text.free_task) +*(.text.frag_show) +*(.text.find_next_zero_string) +*(.text.filp_open) +*(.text.fillonedir) +*(.text.exit_io_context) +*(.text.exit_idle) +*(.text.exact_lock) +*(.text.eth_header) +*(.text.dummy_unregister_security) +*(.text.dummy_socket_post_create) +*(.text.dummy_socket_listen) +*(.text.dummy_quota_on) +*(.text.dummy_inode_follow_link) +*(.text.dummy_file_receive) +*(.text.dummy_file_mprotect) +*(.text.dummy_file_lock) +*(.text.dummy_file_ioctl) +*(.text.dummy_bprm_post_apply_creds) +*(.text.do_writepages) +*(.text.__down_interruptible) +*(.text.do_notify_resume) +*(.text.do_acct_process) +*(.text.del_timer_sync) +*(.text.default_rebuild_header) +*(.text.d_callback) +*(.text.dcache_readdir) +*(.text.ctrl_dumpfamily) +*(.text.cpuset_rmdir) +*(.text.copy_strings_kernel) +*(.text.con_write_room) +*(.text.complete_all) +*(.text.collect_sigign_sigcatch) +*(.text.clear_user) +*(.text.check_unthrottle) +*(.text.cdrom_release) +*(.text.cdrom_newpc_intr) +*(.text.cdrom_ioctl) +*(.text.cdrom_check_status) +*(.text.cdev_put) +*(.text.cdev_add) +*(.text.cap_ptrace) +*(.text.cap_bprm_secureexec) +*(.text.cache_alloc_refill) +*(.text.bmap) +*(.text.blk_run_queue) +*(.text.blk_queue_dma_alignment) +*(.text.blk_ordered_req_seq) +*(.text.blk_backing_dev_unplug) +*(.text.__bitmap_subset) +*(.text.__bitmap_and) +*(.text.bio_unmap_user) +*(.text.__bforget) +*(.text.bd_forget) +*(.text.bad_pipe_w) +*(.text.bad_get_user) +*(.text.audit_free) +*(.text.anon_vma_ctor) +*(.text.anon_pipe_buf_map) +*(.text.alloc_sock_iocb) +*(.text.alloc_fdset) +*(.text.aio_kick_handler) +*(.text.__add_entropy_words) +*(.text.add_disk_randomness) diff --git a/arch/x86_64/kernel/vmlinux.lds.S b/arch/x86_64/kernel/vmlinux.lds.S index 029be20acce..39ff0708f80 100644 --- a/arch/x86_64/kernel/vmlinux.lds.S +++ b/arch/x86_64/kernel/vmlinux.lds.S @@ -20,7 +20,12 @@ SECTIONS phys_startup_64 = startup_64 - LOAD_OFFSET; _text = .; /* Text and read-only data */ .text : AT(ADDR(.text) - LOAD_OFFSET) { + /* First the code that has to be first for bootstrapping */ *(.bootstrap.text) + /* Then all the functions that are "hot" in profiles, to group them + onto the same hugetlb entry */ + #include "functionlist" + /* Then the rest */ *(.text) SCHED_TEXT LOCK_TEXT -- cgit v1.2.3-18-g5258 From 2ab7f1833baf0f0a0ca9868ee21f8273e2858132 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Sat, 25 Mar 2006 16:30:52 +0100 Subject: [PATCH] x86_64: Quieten down microcode update driver Only log data in microcode driver when something is changed Otherwise it was far too noisy on large systems. Also remove the printk when it is unloaded. Cc: tigran@veritas.com Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/i386/kernel/microcode.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/microcode.c b/arch/i386/kernel/microcode.c index 5390b521aca..55bc365b875 100644 --- a/arch/i386/kernel/microcode.c +++ b/arch/i386/kernel/microcode.c @@ -202,8 +202,6 @@ static inline void mark_microcode_update (int cpu_num, microcode_header_t *mc_he } else if (mc_header->rev == uci->rev) { /* notify the caller of success on this cpu */ uci->err = MC_SUCCESS; - printk(KERN_ERR "microcode: CPU%d already at revision" - " 0x%x (current=0x%x)\n", cpu_num, mc_header->rev, uci->rev); goto out; } @@ -369,7 +367,6 @@ static void do_update_one (void * unused) struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num; if (uci->mc == NULL) { - printk(KERN_INFO "microcode: No new microcode data for CPU%d\n", cpu_num); return; } @@ -511,7 +508,6 @@ static int __init microcode_init (void) static void __exit microcode_exit (void) { misc_deregister(µcode_dev); - printk(KERN_INFO "IA-32 Microcode Update Driver v" MICROCODE_VERSION " unregistered\n"); } module_init(microcode_init) -- cgit v1.2.3-18-g5258 From 5b922cd429675059f7a7798f7a0b3898c38dc070 Mon Sep 17 00:00:00 2001 From: Chuck Ebbert <76306.1226@compuserve.com> Date: Sat, 25 Mar 2006 16:30:55 +0100 Subject: [PATCH] x86_64: fix orphaned bits of timer init messages When x86_64 timer init messages were changed to use apic verbosity levels, two messages were missed and one got the wrong level. This causes the last word of a suppressed message to print on a line by itself. Fix that so either the entire message prints or none of it does. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/io_apic.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c index db7db1e3650..77b4c608cca 100644 --- a/arch/x86_64/kernel/io_apic.c +++ b/arch/x86_64/kernel/io_apic.c @@ -1848,7 +1848,7 @@ static inline void check_timer(void) */ setup_ExtINT_IRQ0_pin(apic2, pin2, vector); if (timer_irq_works()) { - printk("works.\n"); + apic_printk(APIC_VERBOSE," works.\n"); nmi_watchdog_default(); if (nmi_watchdog == NMI_IO_APIC) { setup_nmi(); @@ -1860,7 +1860,7 @@ static inline void check_timer(void) */ clear_IO_APIC_pin(apic2, pin2); } - printk(" failed.\n"); + apic_printk(APIC_VERBOSE," failed.\n"); if (nmi_watchdog == NMI_IO_APIC) { printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n"); @@ -1875,7 +1875,7 @@ static inline void check_timer(void) enable_8259A_irq(0); if (timer_irq_works()) { - apic_printk(APIC_QUIET, " works.\n"); + apic_printk(APIC_VERBOSE," works.\n"); return; } apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector); -- cgit v1.2.3-18-g5258 From 01d4bed417b5943577e9290fbf672ea9a449dc46 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Sat, 25 Mar 2006 16:30:58 +0100 Subject: [PATCH] x86_64: Limit max number of CPUs to 255 Because 256 causes overflows in some code that stores them in 8 bit fields and the x86 APIC architecture cannot handle more than 255 anyways. Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index 24a3016c079..6fc63145719 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -323,7 +323,7 @@ config HAVE_ARCH_EARLY_PFN_TO_NID config NR_CPUS int "Maximum number of CPUs (2-256)" - range 2 256 + range 2 255 depends on SMP default "8" help -- cgit v1.2.3-18-g5258 From 7682968b7d4d42bb076051b962c3926b4c98539a Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Sat, 25 Mar 2006 16:31:04 +0100 Subject: [PATCH] x86_64: Change default setting for noexec32 to match i386 kernel This means i386 processes compiled with a recent compiler will get non executable heap by default now. This is the same default as a 32bit PAE kernel would use on a NX enabled CPU. Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/setup64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/setup64.c b/arch/x86_64/kernel/setup64.c index 356b462cb0e..eabdb63fec3 100644 --- a/arch/x86_64/kernel/setup64.c +++ b/arch/x86_64/kernel/setup64.c @@ -59,7 +59,7 @@ int __init nonx_setup(char *str) } __setup("noexec=", nonx_setup); /* parsed early actually */ -int force_personality32 = READ_IMPLIES_EXEC; +int force_personality32 = 0; /* noexec32=on|off Control non executable heap for 32bit processes. -- cgit v1.2.3-18-g5258 From 267b48014a5c0c2ae90b04dad5d95ceb903365a6 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Sat, 25 Mar 2006 16:31:10 +0100 Subject: [PATCH] x86_64: Try to allocate node memmap near the end of node This fixes problems with very large nodes (over 128GB) filling up all of the first 4GB with their mem_map and not leaving enough space for the swiotlb. Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/mm/numa.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86_64/mm/numa.c b/arch/x86_64/mm/numa.c index e4b62753a19..07471a3eb19 100644 --- a/arch/x86_64/mm/numa.c +++ b/arch/x86_64/mm/numa.c @@ -149,7 +149,7 @@ void __init setup_node_bootmem(int nodeid, unsigned long start, unsigned long en /* Initialize final allocator for a zone */ void __init setup_node_zones(int nodeid) { - unsigned long start_pfn, end_pfn; + unsigned long start_pfn, end_pfn, memmapsize, limit; unsigned long zones[MAX_NR_ZONES]; unsigned long holes[MAX_NR_ZONES]; @@ -159,6 +159,16 @@ void __init setup_node_zones(int nodeid) Dprintk(KERN_INFO "Setting up node %d %lx-%lx\n", nodeid, start_pfn, end_pfn); + /* Try to allocate mem_map at end to not fill up precious <4GB + memory. */ + memmapsize = sizeof(struct page) * (end_pfn-start_pfn); + limit = end_pfn << PAGE_SHIFT; + NODE_DATA(nodeid)->node_mem_map = + __alloc_bootmem_core(NODE_DATA(nodeid)->bdata, + memmapsize, SMP_CACHE_BYTES, + round_down(limit - memmapsize, PAGE_SIZE), + limit); + size_zones(zones, holes, start_pfn, end_pfn); free_area_init_node(nodeid, NODE_DATA(nodeid), zones, start_pfn, holes); -- cgit v1.2.3-18-g5258 From b1fc513d81b0f50f9543428ce95ec63ae70ab184 Mon Sep 17 00:00:00 2001 From: Brian Gerst Date: Sat, 25 Mar 2006 16:31:13 +0100 Subject: [PATCH] x86_64: Use cpumask bitops for cpu_vm_mask cpu_vm_mask is of type cpumask_t, so use the proper bitops. Signed-off-by: Brian Gerst Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/smp.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/smp.c b/arch/x86_64/kernel/smp.c index 19ef012b1f1..4a6628b14d9 100644 --- a/arch/x86_64/kernel/smp.c +++ b/arch/x86_64/kernel/smp.c @@ -75,7 +75,7 @@ static inline void leave_mm(int cpu) { if (read_pda(mmu_state) == TLBSTATE_OK) BUG(); - clear_bit(cpu, &read_pda(active_mm)->cpu_vm_mask); + cpu_clear(cpu, read_pda(active_mm)->cpu_vm_mask); load_cr3(swapper_pg_dir); } @@ -85,7 +85,7 @@ static inline void leave_mm(int cpu) * [cpu0: the cpu that switches] * 1) switch_mm() either 1a) or 1b) * 1a) thread switch to a different mm - * 1a1) clear_bit(cpu, &old_mm->cpu_vm_mask); + * 1a1) cpu_clear(cpu, old_mm->cpu_vm_mask); * Stop ipi delivery for the old mm. This is not synchronized with * the other cpus, but smp_invalidate_interrupt ignore flush ipis * for the wrong mm, and in the worst case we perform a superfluous @@ -95,7 +95,7 @@ static inline void leave_mm(int cpu) * was in lazy tlb mode. * 1a3) update cpu active_mm * Now cpu0 accepts tlb flushes for the new mm. - * 1a4) set_bit(cpu, &new_mm->cpu_vm_mask); + * 1a4) cpu_set(cpu, new_mm->cpu_vm_mask); * Now the other cpus will send tlb flush ipis. * 1a4) change cr3. * 1b) thread switch without mm change -- cgit v1.2.3-18-g5258 From da7ed9f98f6f3f18664f8ab24303f9428b9d78f8 Mon Sep 17 00:00:00 2001 From: Vivek Goyal Date: Sat, 25 Mar 2006 16:31:16 +0100 Subject: [PATCH] x86_64: timer interrupt lockup due to pending interrupt o check_timer() routine fails while second kernel is booting after a crash on an opetron box. Problem happens because timer vector (0x31) seems to be locked. o After a system crash, it is not safe to service interrupts any more, hence interrupts are disabled. This leads to pending interrupts at LAPIC. LAPIC sends these interrupts to the CPU during early boot of second kernel. Other pending interrupts are discarded saying unexpected trap but timer interrupt is serviced and CPU does not issue an LAPIC EOI because it think this interrupt came from i8259 and sends ack to 8259. This leads to vector 0x31 locking as LAPIC does not clear respective ISR and keeps on waiting for EOI. o This patch issues extra EOI for the pending interrupts who have ISR set. o Though today only timer seems to be the special case because in early boot it thinks interrupts are coming from i8259 and uses mask_and_ack_8259A() as ack handler and does not issue LAPIC EOI. But probably doing it in generic manner for all vectors makes sense. Signed-off-by: Vivek Goyal Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/apic.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch') diff --git a/arch/x86_64/kernel/apic.c b/arch/x86_64/kernel/apic.c index e5b14c57eaa..d54620147e8 100644 --- a/arch/x86_64/kernel/apic.c +++ b/arch/x86_64/kernel/apic.c @@ -342,6 +342,7 @@ void __init init_bsp_APIC(void) void __cpuinit setup_local_APIC (void) { unsigned int value, maxlvt; + int i, j; value = apic_read(APIC_LVR); @@ -370,6 +371,25 @@ void __cpuinit setup_local_APIC (void) value &= ~APIC_TPRI_MASK; apic_write(APIC_TASKPRI, value); + /* + * After a crash, we no longer service the interrupts and a pending + * interrupt from previous kernel might still have ISR bit set. + * + * Most probably by now CPU has serviced that pending interrupt and + * it might not have done the ack_APIC_irq() because it thought, + * interrupt came from i8259 as ExtInt. LAPIC did not get EOI so it + * does not clear the ISR bit and cpu thinks it has already serivced + * the interrupt. Hence a vector might get locked. It was noticed + * for timer irq (vector 0x31). Issue an extra EOI to clear ISR. + */ + for (i = APIC_ISR_NR - 1; i >= 0; i--) { + value = apic_read(APIC_ISR + i*0x10); + for (j = 31; j >= 0; j--) { + if (value & (1< Date: Sat, 25 Mar 2006 16:31:19 +0100 Subject: [PATCH] x86_64: free_bootmem_node needs __pa in allocate_aperture free_bootmem_node expects a physical address to be passed in, but __alloc_bootmem_node returns a virtual one. That address needs to be translated to physical. Signed-off-by: Jon Mason Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/aperture.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/aperture.c b/arch/x86_64/kernel/aperture.c index a0f955b9995..15b45582101 100644 --- a/arch/x86_64/kernel/aperture.c +++ b/arch/x86_64/kernel/aperture.c @@ -60,7 +60,7 @@ static u32 __init allocate_aperture(void) printk("Cannot allocate aperture memory hole (%p,%uK)\n", p, aper_size>>10); if (p) - free_bootmem_node(nd0, (unsigned long)p, aper_size); + free_bootmem_node(nd0, __pa(p), aper_size); return 0; } printk("Mapping aperture over %d KB of RAM @ %lx\n", -- cgit v1.2.3-18-g5258 From 9d95dd849ccc43c4b21504e1829b5bed68cdb1bc Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Sat, 25 Mar 2006 16:31:22 +0100 Subject: [PATCH] i386/x86-64: List Intel LaGrange AKA SMX in /proc/cpuinfo Spec just got published so we know the CPUID bit. Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/i386/kernel/cpu/proc.c | 2 +- arch/x86_64/kernel/setup.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/proc.c b/arch/i386/kernel/cpu/proc.c index 5cfbd801169..f94cdb7aca5 100644 --- a/arch/i386/kernel/cpu/proc.c +++ b/arch/i386/kernel/cpu/proc.c @@ -45,7 +45,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* Intel-defined (#2) */ - "pni", NULL, NULL, "monitor", "ds_cpl", "vmx", NULL, "est", + "pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est", "tm2", NULL, "cid", NULL, NULL, "cx16", "xtpr", NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index 8acf5313e83..db70090a08f 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -1280,7 +1280,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* Intel-defined (#2) */ - "pni", NULL, NULL, "monitor", "ds_cpl", "vmx", NULL, "est", + "pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est", "tm2", NULL, "cid", NULL, NULL, "cx16", "xtpr", NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, -- cgit v1.2.3-18-g5258 From ba22f13563de5773701fc318ccaaa37b1fb6d294 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Sat, 25 Mar 2006 16:31:31 +0100 Subject: [PATCH] x86_64: Remove CONFIG_UNORDERED_IO It was a failed experiment - all benchmarks done with it on both AMD and Intel showed it was a loss. That was probably because the store buffers of the CPUs for write combining traffic weren't large enough. Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/Kconfig | 10 ---------- 1 file changed, 10 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index 6fc63145719..31bab721cb7 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -520,16 +520,6 @@ config PCI_MMCONFIG bool "Support mmconfig PCI config space access" depends on PCI && ACPI -config UNORDERED_IO - bool "Unordered IO mapping access" - depends on EXPERIMENTAL - help - Use unordered stores to access IO memory mappings in device drivers. - Still very experimental. When a driver works on IA64/ppc64/pa-risc it should - work with this option, but it makes the drivers behave differently - from i386. Requires that the driver writer used memory barriers - properly. - source "drivers/pci/pcie/Kconfig" source "drivers/pci/Kconfig" -- cgit v1.2.3-18-g5258 From 5d05f4de414c98348219b633401ad9c9a5348a8b Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Sat, 25 Mar 2006 16:31:34 +0100 Subject: [PATCH] x86_64: Make GART_IOMMU kconfig help text more specific (trivial) Have the GART_IOMMU help text specify that this is the hardware IOMMU in amd64 processors. This will be significant if/when other IOMMUs are added to the x86-64 architecture. :-) Also, note that the previous help text stated that IOMMU was needed for >3GB memory instead of >4GB. This is fixed in the newer version. Signed-off-by: Jon Mason Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/Kconfig | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index 31bab721cb7..6420baeb8c1 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -364,13 +364,15 @@ config GART_IOMMU select SWIOTLB depends on PCI help - Support the IOMMU. Needed to run systems with more than 3GB of memory - properly with 32-bit PCI devices that do not support DAC (Double Address - Cycle). The IOMMU can be turned off at runtime with the iommu=off parameter. - Normally the kernel will take the right choice by itself. - This option includes a driver for the AMD Opteron/Athlon64 northbridge IOMMU - and a software emulation used on other systems. - If unsure, say Y. + Support for hardware IOMMU in AMD's Opteron/Athlon64 Processors + and for the bounce buffering software IOMMU. + Needed to run systems with more than 3GB of memory properly with + 32-bit PCI devices that do not support DAC (Double Address Cycle). + The IOMMU can be turned off at runtime with the iommu=off parameter. + Normally the kernel will take the right choice by itself. + This option includes a driver for the AMD Opteron/Athlon64 IOMMU + northbridge and a software emulation used on other systems without + hardware IOMMU. If unsure, say Y. # need this always enabled with GART_IOMMU for the VIA workaround config SWIOTLB -- cgit v1.2.3-18-g5258 From 9c01dda02f417270e733e38effe1084c77ae107d Mon Sep 17 00:00:00 2001 From: Navin Boppuri Date: Sat, 25 Mar 2006 16:31:40 +0100 Subject: [PATCH] x86_64: Search K8 devices on more devices. arch/x86_64/kernel/aperture.c: The search for the AGP bridge has been extended to search for all the 256 buses instead of the first 32. This is required since on a some systems, the bridge may be located on a bus much farther than the first 32. By searching all 256 buses, we guarantee that the search succeeds on such systems. arch/x86_64/kernel/pci-gart.c: The search for the Northbridge is not limited to just bus 0 anymore. This is required because on certain systems, we may not find one on bus 0. Signed-off-by: Navin Boppuri Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/aperture.c | 2 +- arch/x86_64/kernel/pci-gart.c | 4 +--- 2 files changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/aperture.c b/arch/x86_64/kernel/aperture.c index 15b45582101..fffd6b0a2fa 100644 --- a/arch/x86_64/kernel/aperture.c +++ b/arch/x86_64/kernel/aperture.c @@ -161,7 +161,7 @@ static __u32 __init search_agp_bridge(u32 *order, int *valid_agp) int num, slot, func; /* Poor man's PCI discovery */ - for (num = 0; num < 32; num++) { + for (num = 0; num < 256; num++) { for (slot = 0; slot < 32; slot++) { for (func = 0; func < 8; func++) { u32 class, cap; diff --git a/arch/x86_64/kernel/pci-gart.c b/arch/x86_64/kernel/pci-gart.c index ebd125e968b..a6c01e12126 100644 --- a/arch/x86_64/kernel/pci-gart.c +++ b/arch/x86_64/kernel/pci-gart.c @@ -65,9 +65,7 @@ static u32 gart_unmapped_entry; #define for_all_nb(dev) \ dev = NULL; \ - while ((dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x1103, dev))!=NULL)\ - if (dev->bus->number == 0 && \ - (PCI_SLOT(dev->devfn) >= 24) && (PCI_SLOT(dev->devfn) <= 31)) + while ((dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x1103, dev))!=NULL) static struct pci_dev *northbridges[MAX_NB]; static u32 northbridge_flush_word[MAX_NB]; -- cgit v1.2.3-18-g5258 From 40caa884650fc6931cf55918dbf7496c49b3ddf8 Mon Sep 17 00:00:00 2001 From: Kevin Winchester Date: Sat, 25 Mar 2006 16:31:43 +0100 Subject: [PATCH] x86_64: Eliminate register_die_notifier symbol exported register_die_notifier is exported twice, once in traps.c and once in x8664_ksyms.c. This results in a warning on build. Signed-off-by: Kevin Winchester Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/x8664_ksyms.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/x8664_ksyms.c b/arch/x86_64/kernel/x8664_ksyms.c index 365e5fbae9a..d96a9348e5a 100644 --- a/arch/x86_64/kernel/x8664_ksyms.c +++ b/arch/x86_64/kernel/x8664_ksyms.c @@ -144,7 +144,6 @@ EXPORT_SYMBOL(rwsem_down_write_failed_thunk); EXPORT_SYMBOL(empty_zero_page); EXPORT_SYMBOL(die_chain); -EXPORT_SYMBOL(register_die_notifier); #ifdef CONFIG_SMP EXPORT_SYMBOL(cpu_sibling_map); -- cgit v1.2.3-18-g5258 From dcf36bfa5de6d4e37878d4c98b6986fee4eb8b4c Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sat, 25 Mar 2006 16:31:46 +0100 Subject: [PATCH] x86_64: group memnodemap and memnodeshift in a memnode structure pfn_to_page() and others need to access both memnode_shift and the very first bytes of memnodemap[]. If we force memnode_shift to be just before the memnodemap array, we can reduce the memory footprint to one cache line instead of two for most setups. This patch introduce a 'memnode' structure where shift and map[] are carefully placed. Signed-off-by: Eric Dumazet Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/mm/numa.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/mm/numa.c b/arch/x86_64/mm/numa.c index 07471a3eb19..63c72641b73 100644 --- a/arch/x86_64/mm/numa.c +++ b/arch/x86_64/mm/numa.c @@ -25,8 +25,7 @@ struct pglist_data *node_data[MAX_NUMNODES] __read_mostly; bootmem_data_t plat_node_bdata[MAX_NUMNODES]; -int memnode_shift; -u8 memnodemap[NODEMAPSIZE]; +struct memnode memnode; unsigned char cpu_to_node[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = NUMA_NO_NODE @@ -367,8 +366,7 @@ void __init init_cpu_to_node(void) EXPORT_SYMBOL(cpu_to_node); EXPORT_SYMBOL(node_to_cpumask); -EXPORT_SYMBOL(memnode_shift); -EXPORT_SYMBOL(memnodemap); +EXPORT_SYMBOL(memnode); EXPORT_SYMBOL(node_data); #ifdef CONFIG_DISCONTIGMEM -- cgit v1.2.3-18-g5258 From 0085979006fd55ec7c2f721bdaa9af130a08d62a Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Sat, 25 Mar 2006 16:31:49 +0100 Subject: [PATCH] x86_64: Remove bogus special case in AMD core parsing. No need to restrict to power of two here. TBD needs more double checking Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/setup.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index db70090a08f..a57eec8311a 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -946,8 +946,6 @@ static int __init init_amd(struct cpuinfo_x86 *c) if (c->extended_cpuid_level >= 0x80000008) { c->x86_max_cores = (cpuid_ecx(0x80000008) & 0xff) + 1; - if (c->x86_max_cores & (c->x86_max_cores - 1)) - c->x86_max_cores = 1; amd_detect_cmp(c); } -- cgit v1.2.3-18-g5258 From ad90573f93533ddf1035b0468ed27b4453e50c46 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Sat, 25 Mar 2006 16:31:52 +0100 Subject: [PATCH] x86_64: Initialize powernow_data[] for all siblings I got an oops on a dual core system because the lost tick handler called cpufreq_get() on core 1 and powernow tried to follow a NULL powernow_data[] pointer there. Initialize powernow_data for all cores of a CPU. Cc: Jacob Shin Cc: Dave Jones Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/i386/kernel/cpu/cpufreq/powernow-k8.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c index d09bec71080..e5bc06480ff 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c @@ -54,7 +54,7 @@ static DECLARE_MUTEX(fidvid_sem); static struct powernow_k8_data *powernow_data[NR_CPUS]; #ifndef CONFIG_SMP -static cpumask_t cpu_core_map[1]; +static cpumask_t cpu_core_map[1] = { CPU_MASK_ALL }; #endif /* Return a frequency in MHz, given an input fid */ @@ -976,7 +976,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) { struct powernow_k8_data *data; cpumask_t oldmask = CPU_MASK_ALL; - int rc; + int rc, i; if (!cpu_online(pol->cpu)) return -ENODEV; @@ -1062,7 +1062,8 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) printk("cpu_init done, current fid 0x%x, vid 0x%x\n", data->currfid, data->currvid); - powernow_data[pol->cpu] = data; + for_each_cpu_mask(i, cpu_core_map[pol->cpu]) + powernow_data[i] = data; return 0; -- cgit v1.2.3-18-g5258 From 3076a492a5e8dd624f237886646b35d12193502d Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Sat, 25 Mar 2006 16:31:55 +0100 Subject: [PATCH] x86_64: Report SIGSEGV for IRET faults tcsh is not happy with the -9999 error code. Suggested by Ernie Petrides Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/entry.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/entry.S b/arch/x86_64/kernel/entry.S index 7c10e9009d6..8538bfea30e 100644 --- a/arch/x86_64/kernel/entry.S +++ b/arch/x86_64/kernel/entry.S @@ -553,7 +553,7 @@ iret_label: /* force a signal here? this matches i386 behaviour */ /* running with kernel gs */ bad_iret: - movq $-9999,%rdi /* better code? */ + movq $11,%rdi /* SIGSEGV */ sti jmp do_exit .previous -- cgit v1.2.3-18-g5258 From c36cd16f78a5dd740a619ef8445e35a73484d58b Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Sat, 25 Mar 2006 16:32:04 +0100 Subject: [PATCH] x86_64: Add cpu_relax() to busy loops in PM timer code Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/pmtimer.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/pmtimer.c b/arch/x86_64/kernel/pmtimer.c index 5c51d10408a..ee5ee4891f3 100644 --- a/arch/x86_64/kernel/pmtimer.c +++ b/arch/x86_64/kernel/pmtimer.c @@ -86,7 +86,7 @@ static unsigned pmtimer_wait_tick(void) for (a = b = inl(pmtmr_ioport) & ACPI_PM_MASK; a == b; b = inl(pmtmr_ioport) & ACPI_PM_MASK) - ; + cpu_relax(); return b; } @@ -97,6 +97,7 @@ void pmtimer_wait(unsigned us) a = pmtimer_wait_tick(); do { b = inl(pmtmr_ioport); + cpu_relax(); } while (cyc2us(b - a) < us); } -- cgit v1.2.3-18-g5258 From 3cbb90a9cb7854b1110663919d5bc3da3f46d5e3 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 25 Mar 2006 09:41:40 -0800 Subject: powerpc: fix strncasecmp prototype It takes a size_t, not an int, as its third argument. Signed-off-by: Linus Torvalds --- arch/powerpc/lib/strcase.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/lib/strcase.c b/arch/powerpc/lib/strcase.c index 36b521091bb..f8ec1eba3fd 100644 --- a/arch/powerpc/lib/strcase.c +++ b/arch/powerpc/lib/strcase.c @@ -1,4 +1,6 @@ +#include #include +#include int strcasecmp(const char *s1, const char *s2) { @@ -11,7 +13,7 @@ int strcasecmp(const char *s1, const char *s2) return c1 - c2; } -int strncasecmp(const char *s1, const char *s2, int n) +int strncasecmp(const char *s1, const char *s2, size_t n) { int c1, c2; -- cgit v1.2.3-18-g5258 From 7d3aee9a9686ffc235c343dcab85c3ebea78908a Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 25 Mar 2006 13:00:17 -0800 Subject: [SPARC64]: Keep cpu_present_map in sync with phys_cpu_present_map. Don't rely on fixup_cpu_present_map() to do this as that function is about to be removed. Signed-off-by: David S. Miller --- arch/sparc64/kernel/smp.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 1b6e2ade100..7dc28a48426 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -1298,6 +1298,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus) while (!cpu_find_by_instance(instance, NULL, &mid)) { if (mid != boot_cpu_id) { cpu_clear(mid, phys_cpu_present_map); + cpu_clear(mid, cpu_present_map); if (num_possible_cpus() <= max_cpus) break; } @@ -1332,8 +1333,10 @@ void __init smp_setup_cpu_possible_map(void) instance = 0; while (!cpu_find_by_instance(instance, NULL, &mid)) { - if (mid < NR_CPUS) + if (mid < NR_CPUS) { cpu_set(mid, phys_cpu_present_map); + cpu_set(mid, cpu_present_map); + } instance++; } } -- cgit v1.2.3-18-g5258 From 091c539f08a6700e0cca8cd620c3d72dd9f9e2bb Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 25 Mar 2006 21:37:29 +0000 Subject: [ARM] SMP: don't set cpu_*_map in smp_prepare_boot_cpu The recent addition of boot_cpu_init() implements the initialisation of the online, present and possible cpu maps for the boot CPU, so there is no reason to duplicate this in the architecture smp_prepare_boot_cpu() hook. Signed-off-by: Russell King --- arch/arm/kernel/smp.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 02aa300c463..1370d726dc1 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -337,9 +337,6 @@ void __init smp_prepare_boot_cpu(void) unsigned int cpu = smp_processor_id(); per_cpu(cpu_data, cpu).idle = current; - - cpu_set(cpu, cpu_present_map); - cpu_set(cpu, cpu_online_map); } static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg) -- cgit v1.2.3-18-g5258 From 48a03ae863e0031def037fc828d7ea1a29b6fb7b Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Sat, 25 Mar 2006 21:57:57 +0000 Subject: [ARM] 3385/1: Battery support for sharp zaurus sl-5500 (collie) Patch from Pavel Machek This adds support for battery reading on collie. Collie slowly charges battery even with charging disabled, so I did not yet enable fast charge. Signed-off-by: Pavel Machek Signed-off-by: Russell King --- arch/arm/mach-sa1100/collie_pm.c | 278 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 278 insertions(+) create mode 100644 arch/arm/mach-sa1100/collie_pm.c (limited to 'arch') diff --git a/arch/arm/mach-sa1100/collie_pm.c b/arch/arm/mach-sa1100/collie_pm.c new file mode 100644 index 00000000000..696d7d29c8a --- /dev/null +++ b/arch/arm/mach-sa1100/collie_pm.c @@ -0,0 +1,278 @@ +/* + * Based on spitz_pm.c and sharp code. + * + * Copyright (C) 2001 SHARP + * Copyright 2005 Pavel Machek + * + * Distribute under GPLv2. + * + * Li-ion batteries are angry beasts, and they like to explode. This driver is not finished, + * and sometimes charges them when it should not. If it makes angry lithium to come your way... + * ...well, you have been warned. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "../drivers/mfd/ucb1x00.h" + +static struct ucb1x00 *ucb; +static int ad_revise; + +#define ADCtoPower(x) ((330 * x * 2) / 1024) + +static void collie_charger_init(void) +{ + int err; + + if (sharpsl_param.adadj != -1) { + ad_revise = sharpsl_param.adadj; + } + + /* Register interrupt handler. */ + if ((err = request_irq(COLLIE_IRQ_GPIO_AC_IN, sharpsl_ac_isr, SA_INTERRUPT, + "ACIN", sharpsl_ac_isr))) { + printk("Could not get irq %d.\n", COLLIE_IRQ_GPIO_AC_IN); + return; + } + if ((err = request_irq(COLLIE_IRQ_GPIO_CO, sharpsl_chrg_full_isr, SA_INTERRUPT, + "CO", sharpsl_chrg_full_isr))) { + free_irq(COLLIE_IRQ_GPIO_AC_IN, sharpsl_ac_isr); + printk("Could not get irq %d.\n", COLLIE_IRQ_GPIO_CO); + return; + } + + ucb1x00_io_set_dir(ucb, 0, COLLIE_TC35143_GPIO_MBAT_ON | COLLIE_TC35143_GPIO_TMP_ON | + COLLIE_TC35143_GPIO_BBAT_ON); + return; +} + +static void collie_measure_temp(int on) +{ + if (on) + ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_TMP_ON, 0); + else + ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_TMP_ON); +} + +static void collie_charge(int on) +{ + if (on) { + printk("Should start charger\n"); + } else { + printk("Should stop charger\n"); + } +#ifdef I_AM_SURE + + /* Zaurus seems to contain LTC1731 ; it should know when to + * stop charging itself, so setting charge on should be + * relatively harmless (as long as it is not done too often). + */ +#define CF_BUF_CTRL_BASE 0xF0800000 +#define SCOOP_REG(adr) (*(volatile unsigned short*)(CF_BUF_CTRL_BASE+(adr))) +#define SCOOP_REG_GPWR SCOOP_REG(SCOOP_GPWR) + + if (on) { + set_scoop_gpio(&colliescoop_device.dev, COLLIE_SCP_CHARGE_ON); + } else { + reset_scoop_gpio(&colliescoop_device.dev, COLLIE_SCP_CHARGE_ON); + } +#endif +} + +static void collie_discharge(int on) +{ +} + +static void collie_discharge1(int on) +{ +} + +static void collie_presuspend(void) +{ +} + +static void collie_postsuspend(void) +{ +} + +static int collie_should_wakeup(unsigned int resume_on_alarm) +{ + return 0; +} + +static unsigned long collie_charger_wakeup(void) +{ + return 0; +} + +int collie_read_backup_battery(void) +{ + int voltage; + + ucb1x00_adc_enable(ucb); + + /* Gives 75..130 */ + ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_BBAT_ON, 0); + voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD1, UCB_SYNC); + + ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_BBAT_ON); + ucb1x00_adc_disable(ucb); + + printk("Backup battery = %d(%d)\n", ADCtoPower(voltage), voltage); + + return ADCtoPower(voltage); +} + +int collie_read_main_battery(void) +{ + int voltage, voltage_rev, voltage_volts; + + ucb1x00_adc_enable(ucb); + ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_BBAT_ON); + ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_MBAT_ON, 0); + /* gives values 160..255 with battery removed... and + 145..255 with battery inserted. (on AC), goes as low as + 80 on DC. */ + voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD1, UCB_SYNC); + + ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_MBAT_ON); + ucb1x00_adc_disable(ucb); + + voltage_rev = voltage + ((ad_revise * voltage) / 652); + voltage_volts = ADCtoPower(voltage_rev); + + printk("Main battery = %d(%d)\n", voltage_volts, voltage); + + if (voltage != -1) + return voltage_volts; + else + return voltage; +} + +int collie_read_temp(void) +{ + int voltage; + + /* According to Sharp, temp must be > 973, main battery must be < 465, + FIXME: sharpsl_pm.c has both conditions negated? FIXME: values + are way out of range? */ + + ucb1x00_adc_enable(ucb); + ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_TMP_ON, 0); + /* >1010 = battery removed, 460 = 22C ?, higer = lower temp ? */ + voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD0, UCB_SYNC); + ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_TMP_ON); + ucb1x00_adc_disable(ucb); + + printk("Battery temp = %d\n", voltage); + return voltage; +} + +static unsigned long read_devdata(int which) +{ + switch (which) { + case SHARPSL_BATT_VOLT: + return collie_read_main_battery(); + case SHARPSL_BATT_TEMP: + return collie_read_temp(); + case SHARPSL_ACIN_VOLT: + return 0x1; + case SHARPSL_STATUS_ACIN: { + int ret = GPLR & COLLIE_GPIO_AC_IN; + printk("AC status = %d\n", ret); + return ret; + } + case SHARPSL_STATUS_FATAL: { + int ret = GPLR & COLLIE_GPIO_MAIN_BAT_LOW; + printk("Fatal bat = %d\n", ret); + return ret; + } + default: + return ~0; + } +} + +struct battery_thresh collie_battery_levels[] = { + { 368, 100}, + { 358, 25}, + { 356, 5}, + { 0, 0}, +}; + +struct sharpsl_charger_machinfo collie_pm_machinfo = { + .init = collie_charger_init, + .read_devdata = read_devdata, + .discharge = collie_discharge, + .discharge1 = collie_discharge1, + .charge = collie_charge, + .measure_temp = collie_measure_temp, + .presuspend = collie_presuspend, + .postsuspend = collie_postsuspend, + .charger_wakeup = collie_charger_wakeup, + .should_wakeup = collie_should_wakeup, + .bat_levels = 3, + .bat_levels_noac = collie_battery_levels, + .bat_levels_acin = collie_battery_levels, + .status_high_acin = 368, + .status_low_acin = 358, + .status_high_noac = 368, + .status_low_noac = 358, +}; + +static int __init collie_pm_ucb_add(struct ucb1x00_dev *pdev) +{ + sharpsl_pm.machinfo = &collie_pm_machinfo; + ucb = pdev->ucb; + return 0; +} + +static struct ucb1x00_driver collie_pm_ucb_driver = { + .add = collie_pm_ucb_add, +}; + +static struct platform_device *collie_pm_device; + +static int __init collie_pm_init(void) +{ + int ret; + + collie_pm_device = platform_device_alloc("sharpsl-pm", -1); + if (!collie_pm_device) + return -ENOMEM; + + collie_pm_device->dev.platform_data = &collie_pm_machinfo; + ret = platform_device_add(collie_pm_device); + + if (ret) + platform_device_put(collie_pm_device); + + if (!ret) + ret = ucb1x00_register_driver(&collie_pm_ucb_driver); + + return ret; +} + +static void __exit collie_pm_exit(void) +{ + ucb1x00_unregister_driver(&collie_pm_ucb_driver); + platform_device_unregister(collie_pm_device); +} + +module_init(collie_pm_init); +module_exit(collie_pm_exit); -- cgit v1.2.3-18-g5258 From 80ed354725825035616fb369a8c38ff77494695c Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Sat, 25 Mar 2006 21:58:00 +0000 Subject: [ARM] 3398/1: Fix the VFP registers loading/storing base address Patch from Catalin Marinas The current VFP code corrupts the VFP registers (including the control ones) if more than one floating point application is executed at the same time. This patch fixes the updating of the load/store base addresses for the VFP registers. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/vfp/vfphw.S | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S index de4ca1223c5..b7ed57e00cd 100644 --- a/arch/arm/vfp/vfphw.S +++ b/arch/arm/vfp/vfphw.S @@ -102,7 +102,6 @@ vfp_support_entry: VFPFMRX r8, FPINST2, NE @ FPINST2 if needed - avoids reading @ nonexistant reg on rev0 VFPFSTMIA r4 @ save the working registers - add r4, r4, #8*16+4 stmia r4, {r1, r5, r6, r8} @ save FPEXC, FPSCR, FPINST, FPINST2 @ and point r4 at the word at the @ start of the register dump @@ -111,10 +110,9 @@ no_old_VFP_process: DBGSTR1 "load state %p", r10 str r10, [r3] @ update the last_VFP_context pointer @ Load the saved state back into the VFP - add r4, r10, #8*16+4 - ldmia r4, {r1, r5, r6, r8} @ load FPEXC, FPSCR, FPINST, FPINST2 VFPFLDMIA r10 @ reload the working registers while @ FPEXC is in a safe state + ldmia r10, {r1, r5, r6, r8} @ load FPEXC, FPSCR, FPINST, FPINST2 tst r1, #FPEXC_FPV2 @ is there an FPINST2 to write? VFPFMXR FPINST2, r8, NE @ FPINST2 if needed - avoids writing @ nonexistant reg on rev0 -- cgit v1.2.3-18-g5258 From 3ee357f0f38a5fddebab18500c290d3879a2d89c Mon Sep 17 00:00:00 2001 From: Malcolm Parsons Date: Sat, 25 Mar 2006 21:58:03 +0000 Subject: [ARM] 3399/1: Fix link problem when CONFIG_PRINTK is disabled Patch from Malcolm Parsons Printking a backtrace requires printk, so disable backtrace code when printk is disabled. Without this patch, a kernel with CONFIG_PRINTK disabled does not link: arch/arm/lib/lib.a(backtrace.o): In function `c_backtrace': arch/arm/lib/backtrace.S:(.text+0x108): undefined reference to `printk' arch/arm/lib/backtrace.S:(.text+0x11c): undefined reference to `printk' arch/arm/lib/lib.a(backtrace.o):(.fixup+0x8): undefined reference to `printk' Signed-off-by: Malcolm Parsons Signed-off-by: Russell King --- arch/arm/lib/backtrace.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S index 68a21c0f3f5..3bdc8c6949c 100644 --- a/arch/arm/lib/backtrace.S +++ b/arch/arm/lib/backtrace.S @@ -29,7 +29,7 @@ ENTRY(__backtrace) ENTRY(c_backtrace) -#ifndef CONFIG_FRAME_POINTER +#if !defined(CONFIG_FRAME_POINTER) || !defined(CONFIG_PRINTK) mov pc, lr #else -- cgit v1.2.3-18-g5258 From 2ce9804fbd9d4da75fb5bb53331b46b614a7d5c3 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Sat, 25 Mar 2006 22:44:05 +0000 Subject: [ARM] 3030/2: fix permission check in the obscur cmpxchg syscall Patch from Nicolas Pitre Quoting RMK: |pte_write() just says that the page _may_ be writable. It doesn't say |that the MMU is programmed to allow writes. If pte_dirty() doesn't |return true, that means that the page is _not_ writable from userspace. |If you write to it from kernel mode (without using put_user) you'll |bypass the MMU read-only protection and may end up writing to a page |owned by two separate processes. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/kernel/traps.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 03924bcc612..d566d5f4574 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -506,7 +506,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs) if (!pmd_present(*pmd)) goto bad_access; pte = pte_offset_map_lock(mm, pmd, addr, &ptl); - if (!pte_present(*pte) || !pte_write(*pte)) { + if (!pte_present(*pte) || !pte_dirty(*pte)) { pte_unmap_unlock(pte, ptl); goto bad_access; } -- cgit v1.2.3-18-g5258 From 104c7b03ea0913a24be103db66d8cf1f1f99a49a Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sat, 25 Mar 2006 23:03:13 +0000 Subject: [ARM] 3383/3: ixp2000: ixdp2x01 platform serial conversion Patch from Lennert Buytenhek Add a PLAT8250_DEV_PLATFORM2, and convert the two ixdp2x01 CPLD serial ports to use platform serial devices with ids PLAT8250_DEV_PLATFORM[12]. (The on-chip xscale UART is PLAT8250_DEV_PLATFORM, id #0.) Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- arch/arm/mach-ixp2000/ixdp2x01.c | 78 ++++++++++++++++++++++++++++++---------- 1 file changed, 59 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c index f9d4968c1d6..66915282a46 100644 --- a/arch/arm/mach-ixp2000/ixdp2x01.c +++ b/arch/arm/mach-ixp2000/ixdp2x01.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include @@ -132,7 +133,7 @@ void __init ixdp2x01_init_irq(void) /************************************************************************* - * IXDP2x01 memory map and serial ports + * IXDP2x01 memory map *************************************************************************/ static struct map_desc ixdp2x01_io_desc __initdata = { .virtual = IXDP2X01_VIRT_CPLD_BASE, @@ -141,40 +142,78 @@ static struct map_desc ixdp2x01_io_desc __initdata = { .type = MT_DEVICE }; -static struct uart_port ixdp2x01_serial_ports[2] = { +static void __init ixdp2x01_map_io(void) +{ + ixp2000_map_io(); + iotable_init(&ixdp2x01_io_desc, 1); +} + + +/************************************************************************* + * IXDP2x01 serial ports + *************************************************************************/ +static struct plat_serial8250_port ixdp2x01_serial_port1[] = { { - .membase = (char *)(IXDP2X01_UART1_VIRT_BASE), .mapbase = (unsigned long)IXDP2X01_UART1_PHYS_BASE, + .membase = (char *)IXDP2X01_UART1_VIRT_BASE, .irq = IRQ_IXDP2X01_UART1, - .flags = UPF_SKIP_TEST, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, .iotype = UPIO_MEM32, .regshift = 2, .uartclk = IXDP2X01_UART_CLK, - .line = 1, - .type = PORT_16550A, - .fifosize = 16 - }, { - .membase = (char *)(IXDP2X01_UART2_VIRT_BASE), + }, + { } +}; + +static struct resource ixdp2x01_uart_resource1 = { + .start = IXDP2X01_UART1_PHYS_BASE, + .end = IXDP2X01_UART1_PHYS_BASE + 0xffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device ixdp2x01_serial_device1 = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM1, + .dev = { + .platform_data = ixdp2x01_serial_port1, + }, + .num_resources = 1, + .resource = &ixdp2x01_uart_resource1, +}; + +static struct plat_serial8250_port ixdp2x01_serial_port2[] = { + { .mapbase = (unsigned long)IXDP2X01_UART2_PHYS_BASE, + .membase = (char *)IXDP2X01_UART2_VIRT_BASE, .irq = IRQ_IXDP2X01_UART2, - .flags = UPF_SKIP_TEST, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, .iotype = UPIO_MEM32, .regshift = 2, .uartclk = IXDP2X01_UART_CLK, - .line = 2, - .type = PORT_16550A, - .fifosize = 16 }, + { } }; -static void __init ixdp2x01_map_io(void) -{ - ixp2000_map_io(); +static struct resource ixdp2x01_uart_resource2 = { + .start = IXDP2X01_UART2_PHYS_BASE, + .end = IXDP2X01_UART2_PHYS_BASE + 0xffff, + .flags = IORESOURCE_MEM, +}; - iotable_init(&ixdp2x01_io_desc, 1); +static struct platform_device ixdp2x01_serial_device2 = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM2, + .dev = { + .platform_data = ixdp2x01_serial_port2, + }, + .num_resources = 1, + .resource = &ixdp2x01_uart_resource2, +}; - early_serial_setup(&ixdp2x01_serial_ports[0]); - early_serial_setup(&ixdp2x01_serial_ports[1]); +static void ixdp2x01_uart_init(void) +{ + platform_device_register(&ixdp2x01_serial_device1); + platform_device_register(&ixdp2x01_serial_device2); } @@ -374,6 +413,7 @@ static void __init ixdp2x01_init_machine(void) platform_add_devices(ixdp2x01_devices, ARRAY_SIZE(ixdp2x01_devices)); ixp2000_uart_init(); + ixdp2x01_uart_init(); } -- cgit v1.2.3-18-g5258 From 841b8a46bffec232377d2de157f971e812be4fe4 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Sun, 26 Mar 2006 01:36:59 -0800 Subject: [PATCH] x86: "make isoimage" support; FDINITRD= support; minor cleanups Add a "make isoimage" to i386 and x86-64, which allows the automatic creation of a bootable CD image. It also adds an option FDINITRD= to include an initrd of the user's choice in generated floppy- or CD boot images. Finally, some minor cleanups of the image generation code. Signed-off-by: H. Peter Anvin Cc: Andi Kleen Cc: Sam Ravnborg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/Makefile | 9 ++++++--- arch/i386/boot/Makefile | 36 ++++++++++++++++++++++++++++++++---- arch/x86_64/Makefile | 17 +++++++++++------ arch/x86_64/boot/Makefile | 36 ++++++++++++++++++++++++++++++++---- 4 files changed, 81 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/i386/Makefile b/arch/i386/Makefile index c848a5b3039..3e4adb1e224 100644 --- a/arch/i386/Makefile +++ b/arch/i386/Makefile @@ -103,7 +103,7 @@ AFLAGS += $(mflags-y) boot := arch/i386/boot PHONY += zImage bzImage compressed zlilo bzlilo \ - zdisk bzdisk fdimage fdimage144 fdimage288 install + zdisk bzdisk fdimage fdimage144 fdimage288 isoimage install all: bzImage @@ -122,7 +122,7 @@ zlilo bzlilo: vmlinux zdisk bzdisk: vmlinux $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) zdisk -fdimage fdimage144 fdimage288: vmlinux +fdimage fdimage144 fdimage288 isoimage: vmlinux $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) $@ install: @@ -139,6 +139,9 @@ define archhelp echo ' install to $$(INSTALL_PATH) and run lilo' echo ' bzdisk - Create a boot floppy in /dev/fd0' echo ' fdimage - Create a boot floppy image' + echo ' isoimage - Create a boot CD-ROM image' endef -CLEAN_FILES += arch/$(ARCH)/boot/fdimage arch/$(ARCH)/boot/mtools.conf +CLEAN_FILES += arch/$(ARCH)/boot/fdimage \ + arch/$(ARCH)/boot/image.iso \ + arch/$(ARCH)/boot/mtools.conf diff --git a/arch/i386/boot/Makefile b/arch/i386/boot/Makefile index f136752563b..33e55476381 100644 --- a/arch/i386/boot/Makefile +++ b/arch/i386/boot/Makefile @@ -62,8 +62,12 @@ $(obj)/setup $(obj)/bootsect: %: %.o FORCE $(obj)/compressed/vmlinux: FORCE $(Q)$(MAKE) $(build)=$(obj)/compressed IMAGE_OFFSET=$(IMAGE_OFFSET) $@ -# Set this if you want to pass append arguments to the zdisk/fdimage kernel +# Set this if you want to pass append arguments to the zdisk/fdimage/isoimage kernel FDARGS = +# Set this if you want an initrd included with the zdisk/fdimage/isoimage kernel +FDINITRD = + +image_cmdline = default linux $(FDARGS) $(if $(FDINITRD),initrd=initrd.img,) $(obj)/mtools.conf: $(src)/mtools.conf.in sed -e 's|@OBJ@|$(obj)|g' < $< > $@ @@ -72,8 +76,11 @@ $(obj)/mtools.conf: $(src)/mtools.conf.in zdisk: $(BOOTIMAGE) $(obj)/mtools.conf MTOOLSRC=$(obj)/mtools.conf mformat a: ; sync syslinux /dev/fd0 ; sync - echo 'default linux $(FDARGS)' | \ + echo '$(image_cmdline)' | \ MTOOLSRC=$(src)/mtools.conf mcopy - a:syslinux.cfg + if [ -f '$(FDINITRD)' ] ; then \ + MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' a:initrd.img ; \ + fi MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) a:linux ; sync # These require being root or having syslinux 2.02 or higher installed @@ -81,18 +88,39 @@ fdimage fdimage144: $(BOOTIMAGE) $(obj)/mtools.conf dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=1440 MTOOLSRC=$(obj)/mtools.conf mformat v: ; sync syslinux $(obj)/fdimage ; sync - echo 'default linux $(FDARGS)' | \ + echo '$(image_cmdline)' | \ MTOOLSRC=$(obj)/mtools.conf mcopy - v:syslinux.cfg + if [ -f '$(FDINITRD)' ] ; then \ + MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' v:initrd.img ; \ + fi MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) v:linux ; sync fdimage288: $(BOOTIMAGE) $(obj)/mtools.conf dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=2880 MTOOLSRC=$(obj)/mtools.conf mformat w: ; sync syslinux $(obj)/fdimage ; sync - echo 'default linux $(FDARGS)' | \ + echo '$(image_cmdline)' | \ MTOOLSRC=$(obj)/mtools.conf mcopy - w:syslinux.cfg + if [ -f '$(FDINITRD)' ] ; then \ + MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' w:initrd.img ; \ + fi MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) w:linux ; sync +isoimage: $(BOOTIMAGE) + -rm -rf $(obj)/isoimage + mkdir $(obj)/isoimage + cp `echo /usr/lib*/syslinux/isolinux.bin | awk '{ print $1; }'` \ + $(obj)/isoimage + cp $(BOOTIMAGE) $(obj)/isoimage/linux + echo '$(image_cmdline)' > $(obj)/isoimage/isolinux.cfg + if [ -f '$(FDINITRD)' ] ; then \ + cp '$(FDINITRD)' $(obj)/isoimage/initrd.img ; \ + fi + mkisofs -J -r -o $(obj)/image.iso -b isolinux.bin -c boot.cat \ + -no-emul-boot -boot-load-size 4 -boot-info-table \ + $(obj)/isoimage + rm -rf $(obj)/isoimage + zlilo: $(BOOTIMAGE) if [ -f $(INSTALL_PATH)/vmlinuz ]; then mv $(INSTALL_PATH)/vmlinuz $(INSTALL_PATH)/vmlinuz.old; fi if [ -f $(INSTALL_PATH)/System.map ]; then mv $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi diff --git a/arch/x86_64/Makefile b/arch/x86_64/Makefile index 0fbc0283609..585fd4a559c 100644 --- a/arch/x86_64/Makefile +++ b/arch/x86_64/Makefile @@ -70,7 +70,7 @@ drivers-$(CONFIG_OPROFILE) += arch/x86_64/oprofile/ boot := arch/x86_64/boot PHONY += bzImage bzlilo install archmrproper \ - fdimage fdimage144 fdimage288 archclean + fdimage fdimage144 fdimage288 isoimage archclean #Default target when executing "make" all: bzImage @@ -87,7 +87,7 @@ bzlilo: vmlinux bzdisk: vmlinux $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) zdisk -fdimage fdimage144 fdimage288: vmlinux +fdimage fdimage144 fdimage288 isoimage: vmlinux $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) $@ install: @@ -99,11 +99,16 @@ archclean: define archhelp echo '* bzImage - Compressed kernel image (arch/$(ARCH)/boot/bzImage)' echo ' install - Install kernel using' - echo ' (your) ~/bin/installkernel or' - echo ' (distribution) /sbin/installkernel or' - echo ' install to $$(INSTALL_PATH) and run lilo' + echo ' (your) ~/bin/installkernel or' + echo ' (distribution) /sbin/installkernel or' + echo ' install to $$(INSTALL_PATH) and run lilo' + echo ' bzdisk - Create a boot floppy in /dev/fd0' + echo ' fdimage - Create a boot floppy image' + echo ' isoimage - Create a boot CD-ROM image' endef -CLEAN_FILES += arch/$(ARCH)/boot/fdimage arch/$(ARCH)/boot/mtools.conf +CLEAN_FILES += arch/$(ARCH)/boot/fdimage \ + arch/$(ARCH)/boot/image.iso \ + arch/$(ARCH)/boot/mtools.conf diff --git a/arch/x86_64/boot/Makefile b/arch/x86_64/boot/Makefile index 29f8396ed15..43ee6c50c27 100644 --- a/arch/x86_64/boot/Makefile +++ b/arch/x86_64/boot/Makefile @@ -60,8 +60,12 @@ $(obj)/setup $(obj)/bootsect: %: %.o FORCE $(obj)/compressed/vmlinux: FORCE $(Q)$(MAKE) $(build)=$(obj)/compressed IMAGE_OFFSET=$(IMAGE_OFFSET) $@ -# Set this if you want to pass append arguments to the zdisk/fdimage kernel +# Set this if you want to pass append arguments to the zdisk/fdimage/isoimage kernel FDARGS = +# Set this if you want an initrd included with the zdisk/fdimage/isoimage kernel +FDINITRD = + +image_cmdline = default linux $(FDARGS) $(if $(FDINITRD),initrd=initrd.img,) $(obj)/mtools.conf: $(src)/mtools.conf.in sed -e 's|@OBJ@|$(obj)|g' < $< > $@ @@ -70,8 +74,11 @@ $(obj)/mtools.conf: $(src)/mtools.conf.in zdisk: $(BOOTIMAGE) $(obj)/mtools.conf MTOOLSRC=$(obj)/mtools.conf mformat a: ; sync syslinux /dev/fd0 ; sync - echo 'default linux $(FDARGS)' | \ + echo '$(image_cmdline)' | \ MTOOLSRC=$(obj)/mtools.conf mcopy - a:syslinux.cfg + if [ -f '$(FDINITRD)' ] ; then \ + MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' a:initrd.img ; \ + fi MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) a:linux ; sync # These require being root or having syslinux 2.02 or higher installed @@ -79,18 +86,39 @@ fdimage fdimage144: $(BOOTIMAGE) $(obj)/mtools.conf dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=1440 MTOOLSRC=$(obj)/mtools.conf mformat v: ; sync syslinux $(obj)/fdimage ; sync - echo 'default linux $(FDARGS)' | \ + echo '$(image_cmdline)' | \ MTOOLSRC=$(obj)/mtools.conf mcopy - v:syslinux.cfg + if [ -f '$(FDINITRD)' ] ; then \ + MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' v:initrd.img ; \ + fi MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) v:linux ; sync fdimage288: $(BOOTIMAGE) $(obj)/mtools.conf dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=2880 MTOOLSRC=$(obj)/mtools.conf mformat w: ; sync syslinux $(obj)/fdimage ; sync - echo 'default linux $(FDARGS)' | \ + echo '$(image_cmdline)' | \ MTOOLSRC=$(obj)/mtools.conf mcopy - w:syslinux.cfg + if [ -f '$(FDINITRD)' ] ; then \ + MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' w:initrd.img ; \ + fi MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) w:linux ; sync +isoimage: $(BOOTIMAGE) + -rm -rf $(obj)/isoimage + mkdir $(obj)/isoimage + cp `echo /usr/lib*/syslinux/isolinux.bin | awk '{ print $1; }'` \ + $(obj)/isoimage + cp $(BOOTIMAGE) $(obj)/isoimage/linux + echo '$(image_cmdline)' > $(obj)/isoimage/isolinux.cfg + if [ -f '$(FDINITRD)' ] ; then \ + cp '$(FDINITRD)' $(obj)/isoimage/initrd.img ; \ + fi + mkisofs -J -r -o $(obj)/image.iso -b isolinux.bin -c boot.cat \ + -no-emul-boot -boot-load-size 4 -boot-info-table \ + $(obj)/isoimage + rm -rf $(obj)/isoimage + zlilo: $(BOOTIMAGE) if [ -f $(INSTALL_PATH)/vmlinuz ]; then mv $(INSTALL_PATH)/vmlinuz $(INSTALL_PATH)/vmlinuz.old; fi if [ -f $(INSTALL_PATH)/System.map ]; then mv $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi -- cgit v1.2.3-18-g5258 From 20c0d2d4402973050e7aad8a481ec6f847ee40d8 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Sun, 26 Mar 2006 01:37:01 -0800 Subject: [PATCH] i386: pass proper trap numbers to die chain handlers Pass the trap number causing the call to notify_die() to the die notification handler chain in a number of instances. Also, honor the return value from the handler chain invocation in die() as, through a debugger, the fault may have been fixed. Signed-off-by: Jan Beulich Acked-By: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/traps.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c index de5386b01d3..4624f8ca245 100644 --- a/arch/i386/kernel/traps.c +++ b/arch/i386/kernel/traps.c @@ -386,8 +386,12 @@ void die(const char * str, struct pt_regs * regs, long err) #endif if (nl) printk("\n"); - notify_die(DIE_OOPS, (char *)str, regs, err, 255, SIGSEGV); - show_registers(regs); + if (notify_die(DIE_OOPS, str, regs, err, + current->thread.trap_no, SIGSEGV) != + NOTIFY_STOP) + show_registers(regs); + else + regs = NULL; } else printk(KERN_EMERG "Recursive die() failure, output suppressed\n"); @@ -395,6 +399,9 @@ void die(const char * str, struct pt_regs * regs, long err) die.lock_owner = -1; spin_unlock_irqrestore(&die.lock, flags); + if (!regs) + return; + if (kexec_should_crash(current)) crash_kexec(regs); @@ -623,7 +630,7 @@ static DEFINE_SPINLOCK(nmi_print_lock); void die_nmi (struct pt_regs *regs, const char *msg) { - if (notify_die(DIE_NMIWATCHDOG, msg, regs, 0, 0, SIGINT) == + if (notify_die(DIE_NMIWATCHDOG, msg, regs, 0, 2, SIGINT) == NOTIFY_STOP) return; @@ -662,7 +669,7 @@ static void default_do_nmi(struct pt_regs * regs) reason = get_nmi_reason(); if (!(reason & 0xc0)) { - if (notify_die(DIE_NMI_IPI, "nmi_ipi", regs, reason, 0, SIGINT) + if (notify_die(DIE_NMI_IPI, "nmi_ipi", regs, reason, 2, SIGINT) == NOTIFY_STOP) return; #ifdef CONFIG_X86_LOCAL_APIC @@ -678,7 +685,7 @@ static void default_do_nmi(struct pt_regs * regs) unknown_nmi_error(reason, regs); return; } - if (notify_die(DIE_NMI, "nmi", regs, reason, 0, SIGINT) == NOTIFY_STOP) + if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP) return; if (reason & 0x80) mem_parity_error(reason, regs); -- cgit v1.2.3-18-g5258 From 10dbe196a8da6b3196881269c6639c0ec11c36cb Mon Sep 17 00:00:00 2001 From: Vivek Goyal Date: Sun, 26 Mar 2006 01:37:02 -0800 Subject: [PATCH] i386: export: memory more than 4G through /proc/iomem Currently /proc/iomem exports physical memory also apart from io device memory. But on i386, it truncates any memory more than 4GB. This leads to problems for kexec/kdump. Kexec reads /proc/iomem to determine the system memory layout and prepares a memory map based on that and passes it to the kernel being kexeced. Given the fact that memory more than 4GB has been truncated, new kernel never gets to see and use that memory. Kdump also reads /proc/iomem to determine the physical memory layout of the system and encodes this informaiton in ELF headers. After a crash new kernel parses these ELF headers being used by previous kernel and vmcore is prepared accordingly. As memory more than 4GB has been truncated, kdump never sees that memory and never prepares ELF headers for it. Hence vmcore is truncated and limited to 4GB even if there is more physical memory in the system. This patch exports memory more than 4GB through /proc/iomem on i386. Signed-off-by: Vivek Goyal Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/setup.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c index d313a11acaf..cec3c925ef9 100644 --- a/arch/i386/kernel/setup.c +++ b/arch/i386/kernel/setup.c @@ -1286,8 +1286,6 @@ legacy_init_iomem_resources(struct resource *code_resource, struct resource *dat probe_roms(); for (i = 0; i < e820.nr_map; i++) { struct resource *res; - if (e820.map[i].addr + e820.map[i].size > 0x100000000ULL) - continue; res = kzalloc(sizeof(struct resource), GFP_ATOMIC); switch (e820.map[i].type) { case E820_RAM: res->name = "System RAM"; break; -- cgit v1.2.3-18-g5258 From 3ed3bce846abc7ef460104b461cac793e41afe5e Mon Sep 17 00:00:00 2001 From: Matt Domsch Date: Sun, 26 Mar 2006 01:37:03 -0800 Subject: [PATCH] ia64: use i386 dmi_scan.c Enable DMI table parsing on ia64. Andi Kleen has a patch in his x86_64 tree which enables the use of i386 dmi_scan.c on x86_64. dmi_scan.c functions are being used by the drivers/char/ipmi/ipmi_si_intf.c driver for autodetecting the ports or memory spaces where the IPMI controllers may be found. This patch adds equivalent changes for ia64 as to what is in the x86_64 tree. In addition, I reworked the DMI detection, such that on EFI-capable systems, it uses the efi.smbios pointer to find the table, rather than brute-force searching from 0xF0000. On non-EFI systems, it continues the brute-force search. My test system, an Intel S870BN4 'Tiger4', aka Dell PowerEdge 7250, with latest BIOS, does not list the IPMI controller in the ACPI namespace, nor does it have an ACPI SPMI table. Also note, currently shipping Dell x8xx EM64T servers don't have these either, so DMI is the only method for obtaining the address of the IPMI controller. Signed-off-by: Matt Domsch Acked-by: "Luck, Tony" Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/dmi_scan.c | 90 +++++++++++++++++++++++++++++---------------- arch/ia64/Kconfig | 4 ++ arch/ia64/kernel/Makefile | 3 +- arch/ia64/kernel/setup.c | 8 ++++ 4 files changed, 72 insertions(+), 33 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/dmi_scan.c b/arch/i386/kernel/dmi_scan.c index ebc8dc116c4..bfecbd46f22 100644 --- a/arch/i386/kernel/dmi_scan.c +++ b/arch/i386/kernel/dmi_scan.c @@ -3,6 +3,7 @@ #include #include #include +#include #include #include #include @@ -185,47 +186,72 @@ static void __init dmi_decode(struct dmi_header *dm) } } -void __init dmi_scan_machine(void) +static int __init dmi_present(char __iomem *p) { u8 buf[15]; - char __iomem *p, *q; + memcpy_fromio(buf, p, 15); + if ((memcmp(buf, "_DMI_", 5) == 0) && dmi_checksum(buf)) { + u16 num = (buf[13] << 8) | buf[12]; + u16 len = (buf[7] << 8) | buf[6]; + u32 base = (buf[11] << 24) | (buf[10] << 16) | + (buf[9] << 8) | buf[8]; - /* - * no iounmap() for that ioremap(); it would be a no-op, but it's - * so early in setup that sucker gets confused into doing what - * it shouldn't if we actually call it. - */ - p = ioremap(0xF0000, 0x10000); - if (p == NULL) - goto out; - - for (q = p; q < p + 0x10000; q += 16) { - memcpy_fromio(buf, q, 15); - if ((memcmp(buf, "_DMI_", 5) == 0) && dmi_checksum(buf)) { - u16 num = (buf[13] << 8) | buf[12]; - u16 len = (buf[7] << 8) | buf[6]; - u32 base = (buf[11] << 24) | (buf[10] << 16) | - (buf[9] << 8) | buf[8]; - - /* - * DMI version 0.0 means that the real version is taken from - * the SMBIOS version, which we don't know at this point. - */ - if (buf[14] != 0) - printk(KERN_INFO "DMI %d.%d present.\n", - buf[14] >> 4, buf[14] & 0xF); - else - printk(KERN_INFO "DMI present.\n"); + /* + * DMI version 0.0 means that the real version is taken from + * the SMBIOS version, which we don't know at this point. + */ + if (buf[14] != 0) + printk(KERN_INFO "DMI %d.%d present.\n", + buf[14] >> 4, buf[14] & 0xF); + else + printk(KERN_INFO "DMI present.\n"); + if (dmi_table(base,len, num, dmi_decode) == 0) + return 0; + } + return 1; +} - if (dmi_table(base,len, num, dmi_decode) == 0) +void __init dmi_scan_machine(void) +{ + char __iomem *p, *q; + int rc; + + if (efi_enabled) { + if (!efi.smbios) + goto out; + + /* This is called as a core_initcall() because it isn't + * needed during early boot. This also means we can + * iounmap the space when we're done with it. + */ + p = dmi_ioremap((unsigned long)efi.smbios, 0x10000); + if (p == NULL) + goto out; + + rc = dmi_present(p + 0x10); /* offset of _DMI_ string */ + iounmap(p); + if (!rc) + return; + } + else { + /* + * no iounmap() for that ioremap(); it would be a no-op, but + * it's so early in setup that sucker gets confused into doing + * what it shouldn't if we actually call it. + */ + p = dmi_ioremap(0xF0000, 0x10000); + if (p == NULL) + goto out; + + for (q = p; q < p + 0x10000; q += 16) { + rc = dmi_present(q); + if (!rc) return; } } - -out: printk(KERN_INFO "DMI not present or invalid.\n"); + out: printk(KERN_INFO "DMI not present or invalid.\n"); } - /** * dmi_check_system - check system DMI data * @list: array of dmi_system_id structures to match against diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 10b6b9e7716..d790a6d9026 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -42,6 +42,10 @@ config TIME_INTERPOLATION bool default y +config DMI + bool + default y + config EFI bool default y diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile index 09a0dbc17fb..59e871dae74 100644 --- a/arch/ia64/kernel/Makefile +++ b/arch/ia64/kernel/Makefile @@ -7,7 +7,7 @@ extra-y := head.o init_task.o vmlinux.lds obj-y := acpi.o entry.o efi.o efi_stub.o gate-data.o fsys.o ia64_ksyms.o irq.o irq_ia64.o \ irq_lsapic.o ivt.o machvec.o pal.o patch.o process.o perfmon.o ptrace.o sal.o \ salinfo.o semaphore.o setup.o signal.o sys_ia64.o time.o traps.o unaligned.o \ - unwind.o mca.o mca_asm.o topology.o + unwind.o mca.o mca_asm.o topology.o dmi_scan.o obj-$(CONFIG_IA64_BRL_EMU) += brl_emu.o obj-$(CONFIG_IA64_GENERIC) += acpi-ext.o @@ -30,6 +30,7 @@ obj-$(CONFIG_IA64_MCA_RECOVERY) += mca_recovery.o obj-$(CONFIG_KPROBES) += kprobes.o jprobes.o obj-$(CONFIG_IA64_UNCACHED_ALLOCATOR) += uncached.o mca_recovery-y += mca_drv.o mca_drv_asm.o +dmi_scan-y += ../../i386/kernel/dmi_scan.o # The gate DSO image is built using a special linker script. targets += gate.so gate-syms.o diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index eb388e271b2..a4421a66ea5 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -37,6 +37,7 @@ #include #include #include +#include #include #include #include @@ -887,3 +888,10 @@ check_bugs (void) ia64_patch_mckinley_e9((unsigned long) __start___mckinley_e9_bundles, (unsigned long) __end___mckinley_e9_bundles); } + +static int __init run_dmi_scan(void) +{ + dmi_scan_machine(); + return 0; +} +core_initcall(run_dmi_scan); -- cgit v1.2.3-18-g5258 From 136939a2b5aa4302281215745ccd567e1df2e8d4 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Sun, 26 Mar 2006 01:37:05 -0800 Subject: [PATCH] EFI, /dev/mem: simplify efi_mem_attribute_range() Pass the size, not a pointer to the size, to efi_mem_attribute_range(). This function validates memory regions for the /dev/mem read/write/mmap paths. The pointer allows arches to reduce the size of the range, but I think that's unnecessary complexity. Simplifying it will let me use efi_mem_attribute_range() to improve the ia64 ioremap() implementation. Signed-off-by: Bjorn Helgaas Cc: Matt Domsch Cc: "Tolentino, Matthew E" Cc: "Brown, Len" Cc: Andi Kleen Acked-by: "Luck, Tony" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ia64/kernel/efi.c | 41 ++++++++++++++++++++--------------------- 1 file changed, 20 insertions(+), 21 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c index 9990320b6f9..2993748c13d 100644 --- a/arch/ia64/kernel/efi.c +++ b/arch/ia64/kernel/efi.c @@ -677,27 +677,34 @@ EXPORT_SYMBOL(efi_mem_attributes); /* * Determines whether the memory at phys_addr supports the desired * attribute (WB, UC, etc). If this returns 1, the caller can safely - * access *size bytes at phys_addr with the specified attribute. + * access size bytes at phys_addr with the specified attribute. */ -static int -efi_mem_attribute_range (unsigned long phys_addr, unsigned long *size, u64 attr) +int +efi_mem_attribute_range (unsigned long phys_addr, unsigned long size, u64 attr) { + unsigned long end = phys_addr + size; efi_memory_desc_t *md = efi_memory_descriptor(phys_addr); - unsigned long md_end; - if (!md || (md->attribute & attr) != attr) + /* + * Some firmware doesn't report MMIO regions in the EFI memory + * map. The Intel BigSur (a.k.a. HP i2000) has this problem. + * On those platforms, we have to assume UC is valid everywhere. + */ + if (!md || (md->attribute & attr) != attr) { + if (attr == EFI_MEMORY_UC && !efi_memmap_has_mmio()) + return 1; return 0; + } do { - md_end = efi_md_end(md); - if (phys_addr + *size <= md_end) + unsigned long md_end = efi_md_end(md); + + if (end <= md_end) return 1; md = efi_memory_descriptor(md_end); - if (!md || (md->attribute & attr) != attr) { - *size = md_end - phys_addr; - return 1; - } + if (!md || (md->attribute & attr) != attr) + return 0; } while (md); return 0; } @@ -708,7 +715,7 @@ efi_mem_attribute_range (unsigned long phys_addr, unsigned long *size, u64 attr) * control access size. */ int -valid_phys_addr_range (unsigned long phys_addr, unsigned long *size) +valid_phys_addr_range (unsigned long phys_addr, unsigned long size) { return efi_mem_attribute_range(phys_addr, size, EFI_MEMORY_WB); } @@ -723,7 +730,7 @@ valid_phys_addr_range (unsigned long phys_addr, unsigned long *size) * because that doesn't appear in the boot-time EFI memory map. */ int -valid_mmap_phys_addr_range (unsigned long phys_addr, unsigned long *size) +valid_mmap_phys_addr_range (unsigned long phys_addr, unsigned long size) { if (efi_mem_attribute_range(phys_addr, size, EFI_MEMORY_WB)) return 1; @@ -731,14 +738,6 @@ valid_mmap_phys_addr_range (unsigned long phys_addr, unsigned long *size) if (efi_mem_attribute_range(phys_addr, size, EFI_MEMORY_UC)) return 1; - /* - * Some firmware doesn't report MMIO regions in the EFI memory map. - * The Intel BigSur (a.k.a. HP i2000) has this problem. In this - * case, we can't use the EFI memory map to validate mmap requests. - */ - if (!efi_memmap_has_mmio()) - return 1; - return 0; } -- cgit v1.2.3-18-g5258 From e9b0a0712148abe96ff717a2b9f8dab1d433e0d5 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Sun, 26 Mar 2006 01:37:06 -0800 Subject: [PATCH] ia64: ioremap: check EFI for valid memory attributes Check the EFI memory map so we can use the correct memory attributes for ioremap(). Previously, we always used uncacheable access, which blows up on some machines for regular system memory. Signed-off-by: Bjorn Helgaas Cc: Matt Domsch Cc: "Tolentino, Matthew E" Cc: "Brown, Len" Cc: Andi Kleen Acked-by: "Luck, Tony" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ia64/mm/Makefile | 2 +- arch/ia64/mm/ioremap.c | 43 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 44 insertions(+), 1 deletion(-) create mode 100644 arch/ia64/mm/ioremap.c (limited to 'arch') diff --git a/arch/ia64/mm/Makefile b/arch/ia64/mm/Makefile index d78d20f0a0f..bb0a01a8187 100644 --- a/arch/ia64/mm/Makefile +++ b/arch/ia64/mm/Makefile @@ -2,7 +2,7 @@ # Makefile for the ia64-specific parts of the memory manager. # -obj-y := init.o fault.o tlb.o extable.o +obj-y := init.o fault.o tlb.o extable.o ioremap.o obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o obj-$(CONFIG_NUMA) += numa.o diff --git a/arch/ia64/mm/ioremap.c b/arch/ia64/mm/ioremap.c new file mode 100644 index 00000000000..62328621f99 --- /dev/null +++ b/arch/ia64/mm/ioremap.c @@ -0,0 +1,43 @@ +/* + * (c) Copyright 2006 Hewlett-Packard Development Company, L.P. + * Bjorn Helgaas + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include + +static inline void __iomem * +__ioremap (unsigned long offset, unsigned long size) +{ + return (void __iomem *) (__IA64_UNCACHED_OFFSET | offset); +} + +void __iomem * +ioremap (unsigned long offset, unsigned long size) +{ + if (efi_mem_attribute_range(offset, size, EFI_MEMORY_UC)) + return __ioremap(offset, size); + + if (efi_mem_attribute_range(offset, size, EFI_MEMORY_WB)) + return phys_to_virt(offset); + + /* + * Someday this should check ACPI resources so we + * can do the right thing for hot-plugged regions. + */ + return __ioremap(offset, size); +} +EXPORT_SYMBOL(ioremap); + +void __iomem * +ioremap_nocache (unsigned long offset, unsigned long size) +{ + return __ioremap(offset, size); +} +EXPORT_SYMBOL(ioremap_nocache); -- cgit v1.2.3-18-g5258 From 27d8e3d15bcf9d7cd99bf6ca910ea9e34328c7fb Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Sun, 26 Mar 2006 01:37:07 -0800 Subject: [PATCH] DMI: only ioremap stuff we actually need dmi_scan_machine() tries to ioremap 0x10000 (64K) bytes, even though it only looks at the first 32 bytes or so. If the SMBIOS table is near the end of a memory region, the ioremap() may fail when it shouldn't. This is in the efi_enabled path, so it really only affects ia64 at the moment. Signed-off-by: Bjorn Helgaas Cc: Matt Domsch Cc: "Tolentino, Matthew E" Cc: "Brown, Len" Cc: Andi Kleen Acked-by: "Luck, Tony" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/dmi_scan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/i386/kernel/dmi_scan.c b/arch/i386/kernel/dmi_scan.c index bfecbd46f22..c032f9e06bb 100644 --- a/arch/i386/kernel/dmi_scan.c +++ b/arch/i386/kernel/dmi_scan.c @@ -224,7 +224,7 @@ void __init dmi_scan_machine(void) * needed during early boot. This also means we can * iounmap the space when we're done with it. */ - p = dmi_ioremap((unsigned long)efi.smbios, 0x10000); + p = dmi_ioremap((unsigned long)efi.smbios, 32); if (p == NULL) goto out; -- cgit v1.2.3-18-g5258 From b2c99e3c70d77fb194df5aa1642030080d28ea48 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Sun, 26 Mar 2006 01:37:08 -0800 Subject: [PATCH] EFI: keep physical table addresses in efi structure Almost all users of the table addresses from the EFI system table want physical addresses. So rather than doing the pa->va->pa conversion, just keep physical addresses in struct efi. This fixes a DMI bug: the efi structure contained the physical SMBIOS address on x86 but the virtual address on ia64, so dmi_scan_machine() used ioremap() on a virtual address on ia64. This is essentially the same as an earlier patch by Matt Tolentino: http://marc.theaimsgroup.com/?l=linux-kernel&m=112130292316281&w=2 except that this changes all table addresses, not just ACPI addresses. Matt's original patch was backed out because it caused MCAs on HP sx1000 systems. That problem is resolved by the ioremap() attribute checking added for ia64. Signed-off-by: Bjorn Helgaas Cc: Matt Domsch Cc: "Tolentino, Matthew E" Cc: "Brown, Len" Cc: Andi Kleen Acked-by: "Luck, Tony" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/acpi/boot.c | 8 ++++---- arch/i386/kernel/dmi_scan.c | 4 ++-- arch/i386/kernel/efi.c | 21 +++++++++++++++------ arch/ia64/kernel/acpi.c | 6 +++--- arch/ia64/kernel/efi.c | 21 +++++++++++++++------ arch/ia64/kernel/setup.c | 2 +- arch/ia64/sn/kernel/setup.c | 5 +++-- 7 files changed, 43 insertions(+), 24 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c index f1a21945963..033066176b3 100644 --- a/arch/i386/kernel/acpi/boot.c +++ b/arch/i386/kernel/acpi/boot.c @@ -668,10 +668,10 @@ unsigned long __init acpi_find_rsdp(void) unsigned long rsdp_phys = 0; if (efi_enabled) { - if (efi.acpi20) - return __pa(efi.acpi20); - else if (efi.acpi) - return __pa(efi.acpi); + if (efi.acpi20 != EFI_INVALID_TABLE_ADDR) + return efi.acpi20; + else if (efi.acpi != EFI_INVALID_TABLE_ADDR) + return efi.acpi; } /* * Scan memory looking for the RSDP signature. First search EBDA (low diff --git a/arch/i386/kernel/dmi_scan.c b/arch/i386/kernel/dmi_scan.c index c032f9e06bb..170d4c9f9bc 100644 --- a/arch/i386/kernel/dmi_scan.c +++ b/arch/i386/kernel/dmi_scan.c @@ -217,14 +217,14 @@ void __init dmi_scan_machine(void) int rc; if (efi_enabled) { - if (!efi.smbios) + if (efi.smbios == EFI_INVALID_TABLE_ADDR) goto out; /* This is called as a core_initcall() because it isn't * needed during early boot. This also means we can * iounmap the space when we're done with it. */ - p = dmi_ioremap((unsigned long)efi.smbios, 32); + p = dmi_ioremap(efi.smbios, 32); if (p == NULL) goto out; diff --git a/arch/i386/kernel/efi.c b/arch/i386/kernel/efi.c index 7ec6cfa01fb..c224c2aebba 100644 --- a/arch/i386/kernel/efi.c +++ b/arch/i386/kernel/efi.c @@ -381,29 +381,38 @@ void __init efi_init(void) if (config_tables == NULL) printk(KERN_ERR PFX "Could not map EFI Configuration Table!\n"); + efi.mps = EFI_INVALID_TABLE_ADDR; + efi.acpi = EFI_INVALID_TABLE_ADDR; + efi.acpi20 = EFI_INVALID_TABLE_ADDR; + efi.smbios = EFI_INVALID_TABLE_ADDR; + efi.sal_systab = EFI_INVALID_TABLE_ADDR; + efi.boot_info = EFI_INVALID_TABLE_ADDR; + efi.hcdp = EFI_INVALID_TABLE_ADDR; + efi.uga = EFI_INVALID_TABLE_ADDR; + for (i = 0; i < num_config_tables; i++) { if (efi_guidcmp(config_tables[i].guid, MPS_TABLE_GUID) == 0) { - efi.mps = (void *)config_tables[i].table; + efi.mps = config_tables[i].table; printk(KERN_INFO " MPS=0x%lx ", config_tables[i].table); } else if (efi_guidcmp(config_tables[i].guid, ACPI_20_TABLE_GUID) == 0) { - efi.acpi20 = __va(config_tables[i].table); + efi.acpi20 = config_tables[i].table; printk(KERN_INFO " ACPI 2.0=0x%lx ", config_tables[i].table); } else if (efi_guidcmp(config_tables[i].guid, ACPI_TABLE_GUID) == 0) { - efi.acpi = __va(config_tables[i].table); + efi.acpi = config_tables[i].table; printk(KERN_INFO " ACPI=0x%lx ", config_tables[i].table); } else if (efi_guidcmp(config_tables[i].guid, SMBIOS_TABLE_GUID) == 0) { - efi.smbios = (void *) config_tables[i].table; + efi.smbios = config_tables[i].table; printk(KERN_INFO " SMBIOS=0x%lx ", config_tables[i].table); } else if (efi_guidcmp(config_tables[i].guid, HCDP_TABLE_GUID) == 0) { - efi.hcdp = (void *)config_tables[i].table; + efi.hcdp = config_tables[i].table; printk(KERN_INFO " HCDP=0x%lx ", config_tables[i].table); } else if (efi_guidcmp(config_tables[i].guid, UGA_IO_PROTOCOL_GUID) == 0) { - efi.uga = (void *)config_tables[i].table; + efi.uga = config_tables[i].table; printk(KERN_INFO " UGA=0x%lx ", config_tables[i].table); } } diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index a4e218ce2ed..58c93a30348 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -651,9 +651,9 @@ unsigned long __init acpi_find_rsdp(void) { unsigned long rsdp_phys = 0; - if (efi.acpi20) - rsdp_phys = __pa(efi.acpi20); - else if (efi.acpi) + if (efi.acpi20 != EFI_INVALID_TABLE_ADDR) + rsdp_phys = efi.acpi20; + else if (efi.acpi != EFI_INVALID_TABLE_ADDR) printk(KERN_WARNING PREFIX "v1.0/r0.71 tables no longer supported\n"); return rsdp_phys; diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c index 2993748c13d..12cfedce73b 100644 --- a/arch/ia64/kernel/efi.c +++ b/arch/ia64/kernel/efi.c @@ -458,24 +458,33 @@ efi_init (void) printk(KERN_INFO "EFI v%u.%.02u by %s:", efi.systab->hdr.revision >> 16, efi.systab->hdr.revision & 0xffff, vendor); + efi.mps = EFI_INVALID_TABLE_ADDR; + efi.acpi = EFI_INVALID_TABLE_ADDR; + efi.acpi20 = EFI_INVALID_TABLE_ADDR; + efi.smbios = EFI_INVALID_TABLE_ADDR; + efi.sal_systab = EFI_INVALID_TABLE_ADDR; + efi.boot_info = EFI_INVALID_TABLE_ADDR; + efi.hcdp = EFI_INVALID_TABLE_ADDR; + efi.uga = EFI_INVALID_TABLE_ADDR; + for (i = 0; i < (int) efi.systab->nr_tables; i++) { if (efi_guidcmp(config_tables[i].guid, MPS_TABLE_GUID) == 0) { - efi.mps = __va(config_tables[i].table); + efi.mps = config_tables[i].table; printk(" MPS=0x%lx", config_tables[i].table); } else if (efi_guidcmp(config_tables[i].guid, ACPI_20_TABLE_GUID) == 0) { - efi.acpi20 = __va(config_tables[i].table); + efi.acpi20 = config_tables[i].table; printk(" ACPI 2.0=0x%lx", config_tables[i].table); } else if (efi_guidcmp(config_tables[i].guid, ACPI_TABLE_GUID) == 0) { - efi.acpi = __va(config_tables[i].table); + efi.acpi = config_tables[i].table; printk(" ACPI=0x%lx", config_tables[i].table); } else if (efi_guidcmp(config_tables[i].guid, SMBIOS_TABLE_GUID) == 0) { - efi.smbios = __va(config_tables[i].table); + efi.smbios = config_tables[i].table; printk(" SMBIOS=0x%lx", config_tables[i].table); } else if (efi_guidcmp(config_tables[i].guid, SAL_SYSTEM_TABLE_GUID) == 0) { - efi.sal_systab = __va(config_tables[i].table); + efi.sal_systab = config_tables[i].table; printk(" SALsystab=0x%lx", config_tables[i].table); } else if (efi_guidcmp(config_tables[i].guid, HCDP_TABLE_GUID) == 0) { - efi.hcdp = __va(config_tables[i].table); + efi.hcdp = config_tables[i].table; printk(" HCDP=0x%lx", config_tables[i].table); } } diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index a4421a66ea5..e4dfda1eb7d 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -434,7 +434,7 @@ setup_arch (char **cmdline_p) find_memory(); /* process SAL system table: */ - ia64_sal_init(efi.sal_systab); + ia64_sal_init(__va(efi.sal_systab)); ia64_setup_printk_clock(); diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c index 8b6d5c84470..30988dfbddf 100644 --- a/arch/ia64/sn/kernel/setup.c +++ b/arch/ia64/sn/kernel/setup.c @@ -327,10 +327,11 @@ sn_scan_pcdp(void) struct pcdp_interface_pci if_pci; extern struct efi efi; - pcdp = efi.hcdp; - if (! pcdp) + if (efi.hcdp == EFI_INVALID_TABLE_ADDR) return; /* no hcdp/pcdp table */ + pcdp = __va(efi.hcdp); + if (pcdp->rev < 3) return; /* only support PCDP (rev >= 3) */ -- cgit v1.2.3-18-g5258 From 23dd842c0033dbb05248c42929c3c526c55386de Mon Sep 17 00:00:00 2001 From: "Tolentino, Matthew E" Date: Sun, 26 Mar 2006 01:37:09 -0800 Subject: [PATCH] EFI fixes Here's a patch that fixes EFI boot for x86 on 2.6.16-rc5-mm3. The off-by-one is admittedly my fault, but the other two fix up the rest. Cc: Bjorn Helgaas Cc: Matt Domsch Cc: "Tolentino, Matthew E" Cc: "Brown, Len" Cc: Andi Kleen Cc: "Luck, Tony" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/dmi_scan.c | 2 +- arch/i386/kernel/setup.c | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/dmi_scan.c b/arch/i386/kernel/dmi_scan.c index 170d4c9f9bc..5efceebc48d 100644 --- a/arch/i386/kernel/dmi_scan.c +++ b/arch/i386/kernel/dmi_scan.c @@ -229,7 +229,7 @@ void __init dmi_scan_machine(void) goto out; rc = dmi_present(p + 0x10); /* offset of _DMI_ string */ - iounmap(p); + dmi_iounmap(p, 32); if (!rc) return; } diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c index cec3c925ef9..6917daa159a 100644 --- a/arch/i386/kernel/setup.c +++ b/arch/i386/kernel/setup.c @@ -1058,10 +1058,10 @@ static int __init free_available_memory(unsigned long start, unsigned long end, void *arg) { /* check max_low_pfn */ - if (start >= ((max_low_pfn + 1) << PAGE_SHIFT)) + if (start >= (max_low_pfn << PAGE_SHIFT)) return 0; - if (end >= ((max_low_pfn + 1) << PAGE_SHIFT)) - end = (max_low_pfn + 1) << PAGE_SHIFT; + if (end >= (max_low_pfn << PAGE_SHIFT)) + end = max_low_pfn << PAGE_SHIFT; if (start < end) free_bootmem(start, end - start); -- cgit v1.2.3-18-g5258 From 14cc3e2b633bb64063698980974df4535368e98f Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Sun, 26 Mar 2006 01:37:14 -0800 Subject: [PATCH] sem2mutex: misc static one-file mutexes Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar Cc: Dave Jones Cc: Paul Mackerras Cc: Ralf Baechle Cc: Jens Axboe Cc: Neil Brown Acked-by: Alasdair G Kergon Cc: Greg KH Cc: Dominik Brodowski Cc: Adam Belay Cc: Martin Schwidefsky Cc: "David S. Miller" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/arm26/kernel/traps.c | 12 +++--- arch/i386/kernel/cpu/cpufreq/powernow-k8.c | 9 ++-- arch/i386/kernel/cpu/mtrr/main.c | 13 +++--- arch/i386/kernel/microcode.c | 7 ++-- arch/mips/lasat/sysctl.c | 63 ++++++++++++++-------------- arch/powerpc/mm/imalloc.c | 18 ++++---- arch/powerpc/platforms/cell/spu_base.c | 22 +++++----- arch/powerpc/platforms/powermac/cpufreq_64.c | 7 ++-- 8 files changed, 78 insertions(+), 73 deletions(-) (limited to 'arch') diff --git a/arch/arm26/kernel/traps.c b/arch/arm26/kernel/traps.c index 5847ea5d774..a79de041b50 100644 --- a/arch/arm26/kernel/traps.c +++ b/arch/arm26/kernel/traps.c @@ -34,7 +34,7 @@ #include #include #include -#include +#include #include "ptrace.h" @@ -207,19 +207,19 @@ void die_if_kernel(const char *str, struct pt_regs *regs, int err) die(str, regs, err); } -static DECLARE_MUTEX(undef_sem); +static DEFINE_MUTEX(undef_mutex); static int (*undef_hook)(struct pt_regs *); int request_undef_hook(int (*fn)(struct pt_regs *)) { int ret = -EBUSY; - down(&undef_sem); + mutex_lock(&undef_mutex); if (undef_hook == NULL) { undef_hook = fn; ret = 0; } - up(&undef_sem); + mutex_unlock(&undef_mutex); return ret; } @@ -228,12 +228,12 @@ int release_undef_hook(int (*fn)(struct pt_regs *)) { int ret = -EINVAL; - down(&undef_sem); + mutex_lock(&undef_mutex); if (undef_hook == fn) { undef_hook = NULL; ret = 0; } - up(&undef_sem); + mutex_unlock(&undef_mutex); return ret; } diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c index e5bc06480ff..1e70823e1cb 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c @@ -40,6 +40,7 @@ #ifdef CONFIG_X86_POWERNOW_K8_ACPI #include +#include #include #endif @@ -49,7 +50,7 @@ #include "powernow-k8.h" /* serialize freq changes */ -static DECLARE_MUTEX(fidvid_sem); +static DEFINE_MUTEX(fidvid_mutex); static struct powernow_k8_data *powernow_data[NR_CPUS]; @@ -943,17 +944,17 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi if (cpufreq_frequency_table_target(pol, data->powernow_table, targfreq, relation, &newstate)) goto err_out; - down(&fidvid_sem); + mutex_lock(&fidvid_mutex); powernow_k8_acpi_pst_values(data, newstate); if (transition_frequency(data, newstate)) { printk(KERN_ERR PFX "transition frequency failed\n"); ret = 1; - up(&fidvid_sem); + mutex_unlock(&fidvid_mutex); goto err_out; } - up(&fidvid_sem); + mutex_unlock(&fidvid_mutex); pol->cur = find_khz_freq_from_fid(data->currfid); ret = 0; diff --git a/arch/i386/kernel/cpu/mtrr/main.c b/arch/i386/kernel/cpu/mtrr/main.c index 3b4618bed70..fff90bda473 100644 --- a/arch/i386/kernel/cpu/mtrr/main.c +++ b/arch/i386/kernel/cpu/mtrr/main.c @@ -36,6 +36,7 @@ #include #include #include +#include #include @@ -47,7 +48,7 @@ u32 num_var_ranges = 0; unsigned int *usage_table; -static DECLARE_MUTEX(mtrr_sem); +static DEFINE_MUTEX(mtrr_mutex); u32 size_or_mask, size_and_mask; @@ -333,7 +334,7 @@ int mtrr_add_page(unsigned long base, unsigned long size, /* No CPU hotplug when we change MTRR entries */ lock_cpu_hotplug(); /* Search for existing MTRR */ - down(&mtrr_sem); + mutex_lock(&mtrr_mutex); for (i = 0; i < num_var_ranges; ++i) { mtrr_if->get(i, &lbase, &lsize, <ype); if (base >= lbase + lsize) @@ -371,7 +372,7 @@ int mtrr_add_page(unsigned long base, unsigned long size, printk(KERN_INFO "mtrr: no more MTRRs available\n"); error = i; out: - up(&mtrr_sem); + mutex_unlock(&mtrr_mutex); unlock_cpu_hotplug(); return error; } @@ -464,7 +465,7 @@ int mtrr_del_page(int reg, unsigned long base, unsigned long size) max = num_var_ranges; /* No CPU hotplug when we change MTRR entries */ lock_cpu_hotplug(); - down(&mtrr_sem); + mutex_lock(&mtrr_mutex); if (reg < 0) { /* Search for existing MTRR */ for (i = 0; i < max; ++i) { @@ -503,7 +504,7 @@ int mtrr_del_page(int reg, unsigned long base, unsigned long size) set_mtrr(reg, 0, 0, 0); error = reg; out: - up(&mtrr_sem); + mutex_unlock(&mtrr_mutex); unlock_cpu_hotplug(); return error; } @@ -685,7 +686,7 @@ void mtrr_ap_init(void) if (!mtrr_if || !use_intel()) return; /* - * Ideally we should hold mtrr_sem here to avoid mtrr entries changed, + * Ideally we should hold mtrr_mutex here to avoid mtrr entries changed, * but this routine will be called in cpu boot time, holding the lock * breaks it. This routine is called in two cases: 1.very earily time * of software resume, when there absolutely isn't mtrr entry changes; diff --git a/arch/i386/kernel/microcode.c b/arch/i386/kernel/microcode.c index 55bc365b875..dd780a00553 100644 --- a/arch/i386/kernel/microcode.c +++ b/arch/i386/kernel/microcode.c @@ -81,6 +81,7 @@ #include #include #include +#include #include #include @@ -114,7 +115,7 @@ MODULE_LICENSE("GPL"); static DEFINE_SPINLOCK(microcode_update_lock); /* no concurrent ->write()s are allowed on /dev/cpu/microcode */ -static DECLARE_MUTEX(microcode_sem); +static DEFINE_MUTEX(microcode_mutex); static void __user *user_buffer; /* user area microcode data buffer */ static unsigned int user_buffer_size; /* it's size */ @@ -444,7 +445,7 @@ static ssize_t microcode_write (struct file *file, const char __user *buf, size_ return -EINVAL; } - down(µcode_sem); + mutex_lock(µcode_mutex); user_buffer = (void __user *) buf; user_buffer_size = (int) len; @@ -453,7 +454,7 @@ static ssize_t microcode_write (struct file *file, const char __user *buf, size_ if (!ret) ret = (ssize_t)len; - up(µcode_sem); + mutex_unlock(µcode_mutex); return ret; } diff --git a/arch/mips/lasat/sysctl.c b/arch/mips/lasat/sysctl.c index 8ff43a1c1e9..e3d5aaa90f0 100644 --- a/arch/mips/lasat/sysctl.c +++ b/arch/mips/lasat/sysctl.c @@ -30,12 +30,13 @@ #include #include #include +#include #include #include "sysctl.h" #include "ds1603.h" -static DECLARE_MUTEX(lasat_info_sem); +static DEFINE_MUTEX(lasat_info_mutex); /* Strategy function to write EEPROM after changing string entry */ int sysctl_lasatstring(ctl_table *table, int *name, int nlen, @@ -43,17 +44,17 @@ int sysctl_lasatstring(ctl_table *table, int *name, int nlen, void *newval, size_t newlen, void **context) { int r; - down(&lasat_info_sem); + mutex_lock(&lasat_info_mutex); r = sysctl_string(table, name, nlen, oldval, oldlenp, newval, newlen, context); if (r < 0) { - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return r; } if (newval && newlen) { lasat_write_eeprom_info(); } - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return 1; } @@ -63,14 +64,14 @@ int proc_dolasatstring(ctl_table *table, int write, struct file *filp, void *buffer, size_t *lenp, loff_t *ppos) { int r; - down(&lasat_info_sem); + mutex_lock(&lasat_info_mutex); r = proc_dostring(table, write, filp, buffer, lenp, ppos); if ( (!write) || r) { - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return r; } lasat_write_eeprom_info(); - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return 0; } @@ -79,14 +80,14 @@ int proc_dolasatint(ctl_table *table, int write, struct file *filp, void *buffer, size_t *lenp, loff_t *ppos) { int r; - down(&lasat_info_sem); + mutex_lock(&lasat_info_mutex); r = proc_dointvec(table, write, filp, buffer, lenp, ppos); if ( (!write) || r) { - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return r; } lasat_write_eeprom_info(); - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return 0; } @@ -98,7 +99,7 @@ int proc_dolasatrtc(ctl_table *table, int write, struct file *filp, void *buffer, size_t *lenp, loff_t *ppos) { int r; - down(&lasat_info_sem); + mutex_lock(&lasat_info_mutex); if (!write) { rtctmp = ds1603_read(); /* check for time < 0 and set to 0 */ @@ -107,11 +108,11 @@ int proc_dolasatrtc(ctl_table *table, int write, struct file *filp, } r = proc_dointvec(table, write, filp, buffer, lenp, ppos); if ( (!write) || r) { - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return r; } ds1603_set(rtctmp); - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return 0; } #endif @@ -122,16 +123,16 @@ int sysctl_lasat_intvec(ctl_table *table, int *name, int nlen, void *newval, size_t newlen, void **context) { int r; - down(&lasat_info_sem); + mutex_lock(&lasat_info_mutex); r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen, context); if (r < 0) { - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return r; } if (newval && newlen) { lasat_write_eeprom_info(); } - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return 1; } @@ -142,19 +143,19 @@ int sysctl_lasat_rtc(ctl_table *table, int *name, int nlen, void *newval, size_t newlen, void **context) { int r; - down(&lasat_info_sem); + mutex_lock(&lasat_info_mutex); rtctmp = ds1603_read(); if (rtctmp < 0) rtctmp = 0; r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen, context); if (r < 0) { - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return r; } if (newval && newlen) { ds1603_set(rtctmp); } - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return 1; } #endif @@ -192,13 +193,13 @@ int proc_lasat_ip(ctl_table *table, int write, struct file *filp, return 0; } - down(&lasat_info_sem); + mutex_lock(&lasat_info_mutex); if (write) { len = 0; p = buffer; while (len < *lenp) { if(get_user(c, p++)) { - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return -EFAULT; } if (c == 0 || c == '\n') @@ -209,7 +210,7 @@ int proc_lasat_ip(ctl_table *table, int write, struct file *filp, len = sizeof(proc_lasat_ipbuf) - 1; if (copy_from_user(proc_lasat_ipbuf, buffer, len)) { - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return -EFAULT; } proc_lasat_ipbuf[len] = 0; @@ -230,12 +231,12 @@ int proc_lasat_ip(ctl_table *table, int write, struct file *filp, len = *lenp; if (len) if(copy_to_user(buffer, proc_lasat_ipbuf, len)) { - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return -EFAULT; } if (len < *lenp) { if(put_user('\n', ((char *) buffer) + len)) { - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return -EFAULT; } len++; @@ -244,7 +245,7 @@ int proc_lasat_ip(ctl_table *table, int write, struct file *filp, *ppos += len; } update_bcastaddr(); - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return 0; } #endif /* defined(CONFIG_INET) */ @@ -256,10 +257,10 @@ static int sysctl_lasat_eeprom_value(ctl_table *table, int *name, int nlen, { int r; - down(&lasat_info_sem); + mutex_lock(&lasat_info_mutex); r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen, context); if (r < 0) { - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return r; } @@ -271,7 +272,7 @@ static int sysctl_lasat_eeprom_value(ctl_table *table, int *name, int nlen, lasat_write_eeprom_info(); lasat_init_board_info(); } - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return 0; } @@ -280,10 +281,10 @@ int proc_lasat_eeprom_value(ctl_table *table, int write, struct file *filp, void *buffer, size_t *lenp, loff_t *ppos) { int r; - down(&lasat_info_sem); + mutex_lock(&lasat_info_mutex); r = proc_dointvec(table, write, filp, buffer, lenp, ppos); if ( (!write) || r) { - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return r; } if (filp && filp->f_dentry) @@ -294,7 +295,7 @@ int proc_lasat_eeprom_value(ctl_table *table, int write, struct file *filp, lasat_board_info.li_eeprom_info.debugaccess = lasat_board_info.li_debugaccess; } lasat_write_eeprom_info(); - up(&lasat_info_sem); + mutex_unlock(&lasat_info_mutex); return 0; } diff --git a/arch/powerpc/mm/imalloc.c b/arch/powerpc/mm/imalloc.c index 8b0c132bc16..add8c1a9af6 100644 --- a/arch/powerpc/mm/imalloc.c +++ b/arch/powerpc/mm/imalloc.c @@ -13,12 +13,12 @@ #include #include #include -#include +#include #include #include "mmu_decl.h" -static DECLARE_MUTEX(imlist_sem); +static DEFINE_MUTEX(imlist_mutex); struct vm_struct * imlist = NULL; static int get_free_im_addr(unsigned long size, unsigned long *im_addr) @@ -257,7 +257,7 @@ struct vm_struct * im_get_free_area(unsigned long size) struct vm_struct *area; unsigned long addr; - down(&imlist_sem); + mutex_lock(&imlist_mutex); if (get_free_im_addr(size, &addr)) { printk(KERN_ERR "%s() cannot obtain addr for size 0x%lx\n", __FUNCTION__, size); @@ -272,7 +272,7 @@ struct vm_struct * im_get_free_area(unsigned long size) __FUNCTION__, addr, size); } next_im_done: - up(&imlist_sem); + mutex_unlock(&imlist_mutex); return area; } @@ -281,9 +281,9 @@ struct vm_struct * im_get_area(unsigned long v_addr, unsigned long size, { struct vm_struct *area; - down(&imlist_sem); + mutex_lock(&imlist_mutex); area = __im_get_area(v_addr, size, criteria); - up(&imlist_sem); + mutex_unlock(&imlist_mutex); return area; } @@ -297,17 +297,17 @@ void im_free(void * addr) printk(KERN_ERR "Trying to %s bad address (%p)\n", __FUNCTION__, addr); return; } - down(&imlist_sem); + mutex_lock(&imlist_mutex); for (p = &imlist ; (tmp = *p) ; p = &tmp->next) { if (tmp->addr == addr) { *p = tmp->next; unmap_vm_area(tmp); kfree(tmp); - up(&imlist_sem); + mutex_unlock(&imlist_mutex); return; } } - up(&imlist_sem); + mutex_unlock(&imlist_mutex); printk(KERN_ERR "Trying to %s nonexistent area (%p)\n", __FUNCTION__, addr); } diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index d75ae03df68..a8fa1eeeb17 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -32,7 +32,7 @@ #include #include -#include +#include #include #include @@ -342,7 +342,7 @@ spu_free_irqs(struct spu *spu) } static LIST_HEAD(spu_list); -static DECLARE_MUTEX(spu_mutex); +static DEFINE_MUTEX(spu_mutex); static void spu_init_channels(struct spu *spu) { @@ -382,7 +382,7 @@ struct spu *spu_alloc(void) { struct spu *spu; - down(&spu_mutex); + mutex_lock(&spu_mutex); if (!list_empty(&spu_list)) { spu = list_entry(spu_list.next, struct spu, list); list_del_init(&spu->list); @@ -391,7 +391,7 @@ struct spu *spu_alloc(void) pr_debug("No SPU left\n"); spu = NULL; } - up(&spu_mutex); + mutex_unlock(&spu_mutex); if (spu) spu_init_channels(spu); @@ -402,9 +402,9 @@ EXPORT_SYMBOL_GPL(spu_alloc); void spu_free(struct spu *spu) { - down(&spu_mutex); + mutex_lock(&spu_mutex); list_add_tail(&spu->list, &spu_list); - up(&spu_mutex); + mutex_unlock(&spu_mutex); } EXPORT_SYMBOL_GPL(spu_free); @@ -633,14 +633,14 @@ static int __init create_spu(struct device_node *spe) spu->wbox_callback = NULL; spu->stop_callback = NULL; - down(&spu_mutex); + mutex_lock(&spu_mutex); spu->number = number++; ret = spu_request_irqs(spu); if (ret) goto out_unmap; list_add(&spu->list, &spu_list); - up(&spu_mutex); + mutex_unlock(&spu_mutex); pr_debug(KERN_DEBUG "Using SPE %s %02x %p %p %p %p %d\n", spu->name, spu->isrc, spu->local_store, @@ -648,7 +648,7 @@ static int __init create_spu(struct device_node *spe) goto out; out_unmap: - up(&spu_mutex); + mutex_unlock(&spu_mutex); spu_unmap(spu); out_free: kfree(spu); @@ -668,10 +668,10 @@ static void destroy_spu(struct spu *spu) static void cleanup_spu_base(void) { struct spu *spu, *tmp; - down(&spu_mutex); + mutex_lock(&spu_mutex); list_for_each_entry_safe(spu, tmp, &spu_list, list) destroy_spu(spu); - up(&spu_mutex); + mutex_unlock(&spu_mutex); } module_exit(cleanup_spu_base); diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c index a415e8d2f7a..b57e465a1b7 100644 --- a/arch/powerpc/platforms/powermac/cpufreq_64.c +++ b/arch/powerpc/platforms/powermac/cpufreq_64.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -90,7 +91,7 @@ static void (*g5_switch_volt)(int speed_mode); static int (*g5_switch_freq)(int speed_mode); static int (*g5_query_freq)(void); -static DECLARE_MUTEX(g5_switch_mutex); +static DEFINE_MUTEX(g5_switch_mutex); static struct smu_sdbp_fvt *g5_fvt_table; /* table of op. points */ @@ -327,7 +328,7 @@ static int g5_cpufreq_target(struct cpufreq_policy *policy, if (g5_pmode_cur == newstate) return 0; - down(&g5_switch_mutex); + mutex_lock(&g5_switch_mutex); freqs.old = g5_cpu_freqs[g5_pmode_cur].frequency; freqs.new = g5_cpu_freqs[newstate].frequency; @@ -337,7 +338,7 @@ static int g5_cpufreq_target(struct cpufreq_policy *policy, rc = g5_switch_freq(newstate); cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - up(&g5_switch_mutex); + mutex_unlock(&g5_switch_mutex); return rc; } -- cgit v1.2.3-18-g5258 From 88959ea968709c35e8b979ac9f5a398fa748091a Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Sun, 26 Mar 2006 01:37:27 -0800 Subject: [PATCH] create struct compat_timex and use it everywhere We had a copy of the compatibility version of struct timex in each 64 bit architecture. This patch just creates a global one and replaces all the usages of the old ones. Signed-off-by: Stephen Rothwell Cc: Arnd Bergmann Acked-by: Kyle McMartin Acked-by: Tony Luck Acked-by: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ia64/ia32/sys_ia32.c | 15 +-------------- arch/mips/kernel/linux32.c | 15 +-------------- arch/parisc/kernel/sys_parisc32.c | 37 ++++--------------------------------- arch/powerpc/kernel/sys_ppc32.c | 15 +-------------- arch/s390/kernel/compat_linux.c | 15 +-------------- arch/sparc64/kernel/sys_sparc32.c | 15 +-------------- arch/x86_64/ia32/sys_ia32.c | 19 +++---------------- 7 files changed, 12 insertions(+), 119 deletions(-) (limited to 'arch') diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c index 13e739e4c84..1e1a2353aef 100644 --- a/arch/ia64/ia32/sys_ia32.c +++ b/arch/ia64/ia32/sys_ia32.c @@ -2594,23 +2594,10 @@ sys32_setresgid(compat_gid_t rgid, compat_gid_t egid, /* Handle adjtimex compatibility. */ -struct timex32 { - u32 modes; - s32 offset, freq, maxerror, esterror; - s32 status, constant, precision, tolerance; - struct compat_timeval time; - s32 tick; - s32 ppsfreq, jitter, shift, stabil; - s32 jitcnt, calcnt, errcnt, stbcnt; - s32 :32; s32 :32; s32 :32; s32 :32; - s32 :32; s32 :32; s32 :32; s32 :32; - s32 :32; s32 :32; s32 :32; s32 :32; -}; - extern int do_adjtimex(struct timex *); asmlinkage long -sys32_adjtimex(struct timex32 *utp) +sys32_adjtimex(struct compat_timex *utp) { struct timex txc; int ret; diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index 013bc93688e..f33e779796f 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -1159,22 +1159,9 @@ out: /* Handle adjtimex compatibility. */ -struct timex32 { - u32 modes; - s32 offset, freq, maxerror, esterror; - s32 status, constant, precision, tolerance; - struct compat_timeval time; - s32 tick; - s32 ppsfreq, jitter, shift, stabil; - s32 jitcnt, calcnt, errcnt, stbcnt; - s32 :32; s32 :32; s32 :32; s32 :32; - s32 :32; s32 :32; s32 :32; s32 :32; - s32 :32; s32 :32; s32 :32; s32 :32; -}; - extern int do_adjtimex(struct timex *); -asmlinkage int sys32_adjtimex(struct timex32 __user *utp) +asmlinkage int sys32_adjtimex(struct compat_timex __user *utp) { struct timex txc; int ret; diff --git a/arch/parisc/kernel/sys_parisc32.c b/arch/parisc/kernel/sys_parisc32.c index 61356901841..ca1d8dbbadf 100644 --- a/arch/parisc/kernel/sys_parisc32.c +++ b/arch/parisc/kernel/sys_parisc32.c @@ -567,43 +567,14 @@ asmlinkage int sys32_sendfile64(int out_fd, int in_fd, compat_loff_t __user *off } -struct timex32 { - unsigned int modes; /* mode selector */ - int offset; /* time offset (usec) */ - int freq; /* frequency offset (scaled ppm) */ - int maxerror; /* maximum error (usec) */ - int esterror; /* estimated error (usec) */ - int status; /* clock command/status */ - int constant; /* pll time constant */ - int precision; /* clock precision (usec) (read only) */ - int tolerance; /* clock frequency tolerance (ppm) - * (read only) - */ - struct compat_timeval time; /* (read only) */ - int tick; /* (modified) usecs between clock ticks */ - - int ppsfreq; /* pps frequency (scaled ppm) (ro) */ - int jitter; /* pps jitter (us) (ro) */ - int shift; /* interval duration (s) (shift) (ro) */ - int stabil; /* pps stability (scaled ppm) (ro) */ - int jitcnt; /* jitter limit exceeded (ro) */ - int calcnt; /* calibration intervals (ro) */ - int errcnt; /* calibration errors (ro) */ - int stbcnt; /* stability limit exceeded (ro) */ - - int :32; int :32; int :32; int :32; - int :32; int :32; int :32; int :32; - int :32; int :32; int :32; int :32; -}; - -asmlinkage long sys32_adjtimex(struct timex32 __user *txc_p32) +asmlinkage long sys32_adjtimex(struct compat_timex __user *txc_p32) { struct timex txc; - struct timex32 t32; + struct compat_timex t32; int ret; extern int do_adjtimex(struct timex *txc); - if(copy_from_user(&t32, txc_p32, sizeof(struct timex32))) + if(copy_from_user(&t32, txc_p32, sizeof(struct compat_timex))) return -EFAULT; #undef CP #define CP(x) txc.x = t32.x @@ -620,7 +591,7 @@ asmlinkage long sys32_adjtimex(struct timex32 __user *txc_p32) CP(time.tv_sec); CP(time.tv_usec); CP(tick); CP(ppsfreq); CP(jitter); CP(shift); CP(stabil); CP(jitcnt); CP(calcnt); CP(errcnt); CP(stbcnt); - return copy_to_user(txc_p32, &t32, sizeof(struct timex32)) ? -EFAULT : ret; + return copy_to_user(txc_p32, &t32, sizeof(struct compat_timex)) ? -EFAULT : ret; } diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c index cd75ab2908f..d9867f583c6 100644 --- a/arch/powerpc/kernel/sys_ppc32.c +++ b/arch/powerpc/kernel/sys_ppc32.c @@ -162,22 +162,9 @@ asmlinkage long compat_sys_sysfs(u32 option, u32 arg1, u32 arg2) } /* Handle adjtimex compatibility. */ -struct timex32 { - u32 modes; - s32 offset, freq, maxerror, esterror; - s32 status, constant, precision, tolerance; - struct compat_timeval time; - s32 tick; - s32 ppsfreq, jitter, shift, stabil; - s32 jitcnt, calcnt, errcnt, stbcnt; - s32 :32; s32 :32; s32 :32; s32 :32; - s32 :32; s32 :32; s32 :32; s32 :32; - s32 :32; s32 :32; s32 :32; s32 :32; -}; - extern int do_adjtimex(struct timex *); -asmlinkage long compat_sys_adjtimex(struct timex32 __user *utp) +asmlinkage long compat_sys_adjtimex(struct compat_timex __user *utp) { struct timex txc; int ret; diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c index cc058dc3bc8..9809264f2f4 100644 --- a/arch/s390/kernel/compat_linux.c +++ b/arch/s390/kernel/compat_linux.c @@ -707,22 +707,9 @@ asmlinkage long sys32_sendfile64(int out_fd, int in_fd, /* Handle adjtimex compatibility. */ -struct timex32 { - u32 modes; - s32 offset, freq, maxerror, esterror; - s32 status, constant, precision, tolerance; - struct compat_timeval time; - s32 tick; - s32 ppsfreq, jitter, shift, stabil; - s32 jitcnt, calcnt, errcnt, stbcnt; - s32 :32; s32 :32; s32 :32; s32 :32; - s32 :32; s32 :32; s32 :32; s32 :32; - s32 :32; s32 :32; s32 :32; s32 :32; -}; - extern int do_adjtimex(struct timex *); -asmlinkage long sys32_adjtimex(struct timex32 __user *utp) +asmlinkage long sys32_adjtimex(struct compat_timex __user *utp) { struct timex txc; int ret; diff --git a/arch/sparc64/kernel/sys_sparc32.c b/arch/sparc64/kernel/sys_sparc32.c index 0e41df02448..48f02f20191 100644 --- a/arch/sparc64/kernel/sys_sparc32.c +++ b/arch/sparc64/kernel/sys_sparc32.c @@ -947,22 +947,9 @@ asmlinkage long compat_sys_sendfile64(int out_fd, int in_fd, /* Handle adjtimex compatibility. */ -struct timex32 { - u32 modes; - s32 offset, freq, maxerror, esterror; - s32 status, constant, precision, tolerance; - struct compat_timeval time; - s32 tick; - s32 ppsfreq, jitter, shift, stabil; - s32 jitcnt, calcnt, errcnt, stbcnt; - s32 :32; s32 :32; s32 :32; s32 :32; - s32 :32; s32 :32; s32 :32; s32 :32; - s32 :32; s32 :32; s32 :32; s32 :32; -}; - extern int do_adjtimex(struct timex *); -asmlinkage long sys32_adjtimex(struct timex32 __user *utp) +asmlinkage long sys32_adjtimex(struct compat_timex __user *utp) { struct timex txc; int ret; diff --git a/arch/x86_64/ia32/sys_ia32.c b/arch/x86_64/ia32/sys_ia32.c index 2b2d029f477..b13121e451a 100644 --- a/arch/x86_64/ia32/sys_ia32.c +++ b/arch/x86_64/ia32/sys_ia32.c @@ -769,30 +769,17 @@ sys32_sendfile(int out_fd, int in_fd, compat_off_t __user *offset, s32 count) /* Handle adjtimex compatibility. */ -struct timex32 { - u32 modes; - s32 offset, freq, maxerror, esterror; - s32 status, constant, precision, tolerance; - struct compat_timeval time; - s32 tick; - s32 ppsfreq, jitter, shift, stabil; - s32 jitcnt, calcnt, errcnt, stbcnt; - s32 :32; s32 :32; s32 :32; s32 :32; - s32 :32; s32 :32; s32 :32; s32 :32; - s32 :32; s32 :32; s32 :32; s32 :32; -}; - extern int do_adjtimex(struct timex *); asmlinkage long -sys32_adjtimex(struct timex32 __user *utp) +sys32_adjtimex(struct compat_timex __user *utp) { struct timex txc; int ret; memset(&txc, 0, sizeof(struct timex)); - if (!access_ok(VERIFY_READ, utp, sizeof(struct timex32)) || + if (!access_ok(VERIFY_READ, utp, sizeof(struct compat_timex)) || __get_user(txc.modes, &utp->modes) || __get_user(txc.offset, &utp->offset) || __get_user(txc.freq, &utp->freq) || @@ -817,7 +804,7 @@ sys32_adjtimex(struct timex32 __user *utp) ret = do_adjtimex(&txc); - if (!access_ok(VERIFY_WRITE, utp, sizeof(struct timex32)) || + if (!access_ok(VERIFY_WRITE, utp, sizeof(struct compat_timex)) || __put_user(txc.modes, &utp->modes) || __put_user(txc.offset, &utp->offset) || __put_user(txc.freq, &utp->freq) || -- cgit v1.2.3-18-g5258 From 3158e9411a66fb98d495ac441c242264f31aaf3e Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Sun, 26 Mar 2006 01:37:29 -0800 Subject: [PATCH] consolidate sys32/compat_adjtimex Create compat_sys_adjtimex and use it an all appropriate places. Signed-off-by: Stephen Rothwell Cc: Arnd Bergmann Acked-by: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/alpha/kernel/osf_sys.c | 1 - arch/ia64/ia32/sys_ia32.c | 62 ------------------------------------ arch/mips/kernel/linux32.c | 61 ------------------------------------ arch/mips/kernel/scall64-n32.S | 2 +- arch/mips/kernel/scall64-o32.S | 2 +- arch/parisc/kernel/sys_parisc32.c | 29 ----------------- arch/parisc/kernel/syscall_table.S | 2 +- arch/powerpc/kernel/sys_ppc32.c | 60 ----------------------------------- arch/s390/kernel/compat_linux.c | 61 ------------------------------------ arch/s390/kernel/compat_wrapper.S | 8 ++--- arch/s390/kernel/syscalls.S | 2 +- arch/sparc64/kernel/sys_sparc32.c | 61 ------------------------------------ arch/sparc64/kernel/systbls.S | 2 +- arch/x86_64/ia32/ia32entry.S | 2 +- arch/x86_64/ia32/sys_ia32.c | 64 -------------------------------------- 15 files changed, 10 insertions(+), 409 deletions(-) (limited to 'arch') diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index 7fb14f42a12..31afe3d91ac 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -821,7 +821,6 @@ osf_setsysinfo(unsigned long op, void __user *buffer, unsigned long nbytes, affects all sorts of things, like timeval and itimerval. */ extern struct timezone sys_tz; -extern int do_adjtimex(struct timex *); struct timeval32 { diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c index 1e1a2353aef..5366b3b23d0 100644 --- a/arch/ia64/ia32/sys_ia32.c +++ b/arch/ia64/ia32/sys_ia32.c @@ -25,7 +25,6 @@ #include #include #include -#include #include #include #include @@ -2591,65 +2590,4 @@ sys32_setresgid(compat_gid_t rgid, compat_gid_t egid, ssgid = (sgid == (compat_gid_t)-1) ? ((gid_t)-1) : ((gid_t)sgid); return sys_setresgid(srgid, segid, ssgid); } - -/* Handle adjtimex compatibility. */ - -extern int do_adjtimex(struct timex *); - -asmlinkage long -sys32_adjtimex(struct compat_timex *utp) -{ - struct timex txc; - int ret; - - memset(&txc, 0, sizeof(struct timex)); - - if(get_user(txc.modes, &utp->modes) || - __get_user(txc.offset, &utp->offset) || - __get_user(txc.freq, &utp->freq) || - __get_user(txc.maxerror, &utp->maxerror) || - __get_user(txc.esterror, &utp->esterror) || - __get_user(txc.status, &utp->status) || - __get_user(txc.constant, &utp->constant) || - __get_user(txc.precision, &utp->precision) || - __get_user(txc.tolerance, &utp->tolerance) || - __get_user(txc.time.tv_sec, &utp->time.tv_sec) || - __get_user(txc.time.tv_usec, &utp->time.tv_usec) || - __get_user(txc.tick, &utp->tick) || - __get_user(txc.ppsfreq, &utp->ppsfreq) || - __get_user(txc.jitter, &utp->jitter) || - __get_user(txc.shift, &utp->shift) || - __get_user(txc.stabil, &utp->stabil) || - __get_user(txc.jitcnt, &utp->jitcnt) || - __get_user(txc.calcnt, &utp->calcnt) || - __get_user(txc.errcnt, &utp->errcnt) || - __get_user(txc.stbcnt, &utp->stbcnt)) - return -EFAULT; - - ret = do_adjtimex(&txc); - - if(put_user(txc.modes, &utp->modes) || - __put_user(txc.offset, &utp->offset) || - __put_user(txc.freq, &utp->freq) || - __put_user(txc.maxerror, &utp->maxerror) || - __put_user(txc.esterror, &utp->esterror) || - __put_user(txc.status, &utp->status) || - __put_user(txc.constant, &utp->constant) || - __put_user(txc.precision, &utp->precision) || - __put_user(txc.tolerance, &utp->tolerance) || - __put_user(txc.time.tv_sec, &utp->time.tv_sec) || - __put_user(txc.time.tv_usec, &utp->time.tv_usec) || - __put_user(txc.tick, &utp->tick) || - __put_user(txc.ppsfreq, &utp->ppsfreq) || - __put_user(txc.jitter, &utp->jitter) || - __put_user(txc.shift, &utp->shift) || - __put_user(txc.stabil, &utp->stabil) || - __put_user(txc.jitcnt, &utp->jitcnt) || - __put_user(txc.calcnt, &utp->calcnt) || - __put_user(txc.errcnt, &utp->errcnt) || - __put_user(txc.stbcnt, &utp->stbcnt)) - ret = -EFAULT; - - return ret; -} #endif /* NOTYET */ diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index f33e779796f..3f40c37a9ee 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -30,7 +30,6 @@ #include #include #include -#include #include #include #include @@ -1157,66 +1156,6 @@ out: return err; } -/* Handle adjtimex compatibility. */ - -extern int do_adjtimex(struct timex *); - -asmlinkage int sys32_adjtimex(struct compat_timex __user *utp) -{ - struct timex txc; - int ret; - - memset(&txc, 0, sizeof(struct timex)); - - if (get_user(txc.modes, &utp->modes) || - __get_user(txc.offset, &utp->offset) || - __get_user(txc.freq, &utp->freq) || - __get_user(txc.maxerror, &utp->maxerror) || - __get_user(txc.esterror, &utp->esterror) || - __get_user(txc.status, &utp->status) || - __get_user(txc.constant, &utp->constant) || - __get_user(txc.precision, &utp->precision) || - __get_user(txc.tolerance, &utp->tolerance) || - __get_user(txc.time.tv_sec, &utp->time.tv_sec) || - __get_user(txc.time.tv_usec, &utp->time.tv_usec) || - __get_user(txc.tick, &utp->tick) || - __get_user(txc.ppsfreq, &utp->ppsfreq) || - __get_user(txc.jitter, &utp->jitter) || - __get_user(txc.shift, &utp->shift) || - __get_user(txc.stabil, &utp->stabil) || - __get_user(txc.jitcnt, &utp->jitcnt) || - __get_user(txc.calcnt, &utp->calcnt) || - __get_user(txc.errcnt, &utp->errcnt) || - __get_user(txc.stbcnt, &utp->stbcnt)) - return -EFAULT; - - ret = do_adjtimex(&txc); - - if (put_user(txc.modes, &utp->modes) || - __put_user(txc.offset, &utp->offset) || - __put_user(txc.freq, &utp->freq) || - __put_user(txc.maxerror, &utp->maxerror) || - __put_user(txc.esterror, &utp->esterror) || - __put_user(txc.status, &utp->status) || - __put_user(txc.constant, &utp->constant) || - __put_user(txc.precision, &utp->precision) || - __put_user(txc.tolerance, &utp->tolerance) || - __put_user(txc.time.tv_sec, &utp->time.tv_sec) || - __put_user(txc.time.tv_usec, &utp->time.tv_usec) || - __put_user(txc.tick, &utp->tick) || - __put_user(txc.ppsfreq, &utp->ppsfreq) || - __put_user(txc.jitter, &utp->jitter) || - __put_user(txc.shift, &utp->shift) || - __put_user(txc.stabil, &utp->stabil) || - __put_user(txc.jitcnt, &utp->jitcnt) || - __put_user(txc.calcnt, &utp->calcnt) || - __put_user(txc.errcnt, &utp->errcnt) || - __put_user(txc.stbcnt, &utp->stbcnt)) - ret = -EFAULT; - - return ret; -} - asmlinkage int sys32_sendfile(int out_fd, int in_fd, compat_off_t __user *offset, s32 count) { diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index 02c8267e45e..05a2c0567da 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -273,7 +273,7 @@ EXPORT(sysn32_call_table) PTR sys_pivot_root PTR sys32_sysctl PTR sys_prctl - PTR sys32_adjtimex + PTR compat_sys_adjtimex PTR compat_sys_setrlimit /* 6155 */ PTR sys_chroot PTR sys_sync diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 797e0d87488..19c4ca481b0 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -328,7 +328,7 @@ sys_call_table: PTR sys_setdomainname PTR sys32_newuname PTR sys_ni_syscall /* sys_modify_ldt */ - PTR sys32_adjtimex + PTR compat_sys_adjtimex PTR sys_mprotect /* 4125 */ PTR compat_sys_sigprocmask PTR sys_ni_syscall /* was creat_module */ diff --git a/arch/parisc/kernel/sys_parisc32.c b/arch/parisc/kernel/sys_parisc32.c index ca1d8dbbadf..d286f68a3d3 100644 --- a/arch/parisc/kernel/sys_parisc32.c +++ b/arch/parisc/kernel/sys_parisc32.c @@ -21,7 +21,6 @@ #include #include #include -#include #include #include #include @@ -567,34 +566,6 @@ asmlinkage int sys32_sendfile64(int out_fd, int in_fd, compat_loff_t __user *off } -asmlinkage long sys32_adjtimex(struct compat_timex __user *txc_p32) -{ - struct timex txc; - struct compat_timex t32; - int ret; - extern int do_adjtimex(struct timex *txc); - - if(copy_from_user(&t32, txc_p32, sizeof(struct compat_timex))) - return -EFAULT; -#undef CP -#define CP(x) txc.x = t32.x - CP(modes); CP(offset); CP(freq); CP(maxerror); CP(esterror); - CP(status); CP(constant); CP(precision); CP(tolerance); - CP(time.tv_sec); CP(time.tv_usec); CP(tick); CP(ppsfreq); CP(jitter); - CP(shift); CP(stabil); CP(jitcnt); CP(calcnt); CP(errcnt); - CP(stbcnt); - ret = do_adjtimex(&txc); -#undef CP -#define CP(x) t32.x = txc.x - CP(modes); CP(offset); CP(freq); CP(maxerror); CP(esterror); - CP(status); CP(constant); CP(precision); CP(tolerance); - CP(time.tv_sec); CP(time.tv_usec); CP(tick); CP(ppsfreq); CP(jitter); - CP(shift); CP(stabil); CP(jitcnt); CP(calcnt); CP(errcnt); - CP(stbcnt); - return copy_to_user(txc_p32, &t32, sizeof(struct compat_timex)) ? -EFAULT : ret; -} - - struct sysinfo32 { s32 uptime; u32 loads[3]; diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S index 71011eadb87..89b6c56ea0a 100644 --- a/arch/parisc/kernel/syscall_table.S +++ b/arch/parisc/kernel/syscall_table.S @@ -207,7 +207,7 @@ /* struct sockaddr... */ ENTRY_SAME(recvfrom) /* struct timex contains longs */ - ENTRY_DIFF(adjtimex) + ENTRY_COMP(adjtimex) ENTRY_SAME(mprotect) /* 125 */ /* old_sigset_t forced to 32 bits. Beware glibc sigset_t */ ENTRY_COMP(sigprocmask) diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c index d9867f583c6..ec274e68881 100644 --- a/arch/powerpc/kernel/sys_ppc32.c +++ b/arch/powerpc/kernel/sys_ppc32.c @@ -24,7 +24,6 @@ #include #include #include -#include #include #include #include @@ -161,65 +160,6 @@ asmlinkage long compat_sys_sysfs(u32 option, u32 arg1, u32 arg2) return sys_sysfs((int)option, arg1, arg2); } -/* Handle adjtimex compatibility. */ -extern int do_adjtimex(struct timex *); - -asmlinkage long compat_sys_adjtimex(struct compat_timex __user *utp) -{ - struct timex txc; - int ret; - - memset(&txc, 0, sizeof(struct timex)); - - if(get_user(txc.modes, &utp->modes) || - __get_user(txc.offset, &utp->offset) || - __get_user(txc.freq, &utp->freq) || - __get_user(txc.maxerror, &utp->maxerror) || - __get_user(txc.esterror, &utp->esterror) || - __get_user(txc.status, &utp->status) || - __get_user(txc.constant, &utp->constant) || - __get_user(txc.precision, &utp->precision) || - __get_user(txc.tolerance, &utp->tolerance) || - __get_user(txc.time.tv_sec, &utp->time.tv_sec) || - __get_user(txc.time.tv_usec, &utp->time.tv_usec) || - __get_user(txc.tick, &utp->tick) || - __get_user(txc.ppsfreq, &utp->ppsfreq) || - __get_user(txc.jitter, &utp->jitter) || - __get_user(txc.shift, &utp->shift) || - __get_user(txc.stabil, &utp->stabil) || - __get_user(txc.jitcnt, &utp->jitcnt) || - __get_user(txc.calcnt, &utp->calcnt) || - __get_user(txc.errcnt, &utp->errcnt) || - __get_user(txc.stbcnt, &utp->stbcnt)) - return -EFAULT; - - ret = do_adjtimex(&txc); - - if(put_user(txc.modes, &utp->modes) || - __put_user(txc.offset, &utp->offset) || - __put_user(txc.freq, &utp->freq) || - __put_user(txc.maxerror, &utp->maxerror) || - __put_user(txc.esterror, &utp->esterror) || - __put_user(txc.status, &utp->status) || - __put_user(txc.constant, &utp->constant) || - __put_user(txc.precision, &utp->precision) || - __put_user(txc.tolerance, &utp->tolerance) || - __put_user(txc.time.tv_sec, &utp->time.tv_sec) || - __put_user(txc.time.tv_usec, &utp->time.tv_usec) || - __put_user(txc.tick, &utp->tick) || - __put_user(txc.ppsfreq, &utp->ppsfreq) || - __put_user(txc.jitter, &utp->jitter) || - __put_user(txc.shift, &utp->shift) || - __put_user(txc.stabil, &utp->stabil) || - __put_user(txc.jitcnt, &utp->jitcnt) || - __put_user(txc.calcnt, &utp->calcnt) || - __put_user(txc.errcnt, &utp->errcnt) || - __put_user(txc.stbcnt, &utp->stbcnt)) - ret = -EFAULT; - - return ret; -} - asmlinkage long compat_sys_pause(void) { current->state = TASK_INTERRUPTIBLE; diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c index 9809264f2f4..5e14de37c17 100644 --- a/arch/s390/kernel/compat_linux.c +++ b/arch/s390/kernel/compat_linux.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include #include @@ -705,66 +704,6 @@ asmlinkage long sys32_sendfile64(int out_fd, int in_fd, return ret; } -/* Handle adjtimex compatibility. */ - -extern int do_adjtimex(struct timex *); - -asmlinkage long sys32_adjtimex(struct compat_timex __user *utp) -{ - struct timex txc; - int ret; - - memset(&txc, 0, sizeof(struct timex)); - - if(get_user(txc.modes, &utp->modes) || - __get_user(txc.offset, &utp->offset) || - __get_user(txc.freq, &utp->freq) || - __get_user(txc.maxerror, &utp->maxerror) || - __get_user(txc.esterror, &utp->esterror) || - __get_user(txc.status, &utp->status) || - __get_user(txc.constant, &utp->constant) || - __get_user(txc.precision, &utp->precision) || - __get_user(txc.tolerance, &utp->tolerance) || - __get_user(txc.time.tv_sec, &utp->time.tv_sec) || - __get_user(txc.time.tv_usec, &utp->time.tv_usec) || - __get_user(txc.tick, &utp->tick) || - __get_user(txc.ppsfreq, &utp->ppsfreq) || - __get_user(txc.jitter, &utp->jitter) || - __get_user(txc.shift, &utp->shift) || - __get_user(txc.stabil, &utp->stabil) || - __get_user(txc.jitcnt, &utp->jitcnt) || - __get_user(txc.calcnt, &utp->calcnt) || - __get_user(txc.errcnt, &utp->errcnt) || - __get_user(txc.stbcnt, &utp->stbcnt)) - return -EFAULT; - - ret = do_adjtimex(&txc); - - if(put_user(txc.modes, &utp->modes) || - __put_user(txc.offset, &utp->offset) || - __put_user(txc.freq, &utp->freq) || - __put_user(txc.maxerror, &utp->maxerror) || - __put_user(txc.esterror, &utp->esterror) || - __put_user(txc.status, &utp->status) || - __put_user(txc.constant, &utp->constant) || - __put_user(txc.precision, &utp->precision) || - __put_user(txc.tolerance, &utp->tolerance) || - __put_user(txc.time.tv_sec, &utp->time.tv_sec) || - __put_user(txc.time.tv_usec, &utp->time.tv_usec) || - __put_user(txc.tick, &utp->tick) || - __put_user(txc.ppsfreq, &utp->ppsfreq) || - __put_user(txc.jitter, &utp->jitter) || - __put_user(txc.shift, &utp->shift) || - __put_user(txc.stabil, &utp->stabil) || - __put_user(txc.jitcnt, &utp->jitcnt) || - __put_user(txc.calcnt, &utp->calcnt) || - __put_user(txc.errcnt, &utp->errcnt) || - __put_user(txc.stbcnt, &utp->stbcnt)) - ret = -EFAULT; - - return ret; -} - #ifdef CONFIG_SYSCTL struct __sysctl_args32 { u32 name; diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S index 50e80138e7a..199da68bd7b 100644 --- a/arch/s390/kernel/compat_wrapper.S +++ b/arch/s390/kernel/compat_wrapper.S @@ -551,10 +551,10 @@ sys32_newuname_wrapper: llgtr %r2,%r2 # struct new_utsname * jg s390x_newuname # branch to system call - .globl sys32_adjtimex_wrapper -sys32_adjtimex_wrapper: - llgtr %r2,%r2 # struct timex_emu31 * - jg sys32_adjtimex # branch to system call + .globl compat_sys_adjtimex_wrapper +compat_sys_adjtimex_wrapper: + llgtr %r2,%r2 # struct compat_timex * + jg compat_sys_adjtimex # branch to system call .globl sys32_mprotect_wrapper sys32_mprotect_wrapper: diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S index 7c88d85c359..2f56654da82 100644 --- a/arch/s390/kernel/syscalls.S +++ b/arch/s390/kernel/syscalls.S @@ -132,7 +132,7 @@ SYSCALL(sys_clone_glue,sys_clone_glue,sys32_clone_glue) /* 120 */ SYSCALL(sys_setdomainname,sys_setdomainname,sys32_setdomainname_wrapper) SYSCALL(sys_newuname,s390x_newuname,sys32_newuname_wrapper) NI_SYSCALL /* modify_ldt for i386 */ -SYSCALL(sys_adjtimex,sys_adjtimex,sys32_adjtimex_wrapper) +SYSCALL(sys_adjtimex,sys_adjtimex,compat_sys_adjtimex_wrapper) SYSCALL(sys_mprotect,sys_mprotect,sys32_mprotect_wrapper) /* 125 */ SYSCALL(sys_sigprocmask,sys_sigprocmask,compat_sys_sigprocmask_wrapper) NI_SYSCALL /* old "create module" */ diff --git a/arch/sparc64/kernel/sys_sparc32.c b/arch/sparc64/kernel/sys_sparc32.c index 48f02f20191..2e906bad56f 100644 --- a/arch/sparc64/kernel/sys_sparc32.c +++ b/arch/sparc64/kernel/sys_sparc32.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include #include @@ -945,66 +944,6 @@ asmlinkage long compat_sys_sendfile64(int out_fd, int in_fd, return ret; } -/* Handle adjtimex compatibility. */ - -extern int do_adjtimex(struct timex *); - -asmlinkage long sys32_adjtimex(struct compat_timex __user *utp) -{ - struct timex txc; - int ret; - - memset(&txc, 0, sizeof(struct timex)); - - if (get_user(txc.modes, &utp->modes) || - __get_user(txc.offset, &utp->offset) || - __get_user(txc.freq, &utp->freq) || - __get_user(txc.maxerror, &utp->maxerror) || - __get_user(txc.esterror, &utp->esterror) || - __get_user(txc.status, &utp->status) || - __get_user(txc.constant, &utp->constant) || - __get_user(txc.precision, &utp->precision) || - __get_user(txc.tolerance, &utp->tolerance) || - __get_user(txc.time.tv_sec, &utp->time.tv_sec) || - __get_user(txc.time.tv_usec, &utp->time.tv_usec) || - __get_user(txc.tick, &utp->tick) || - __get_user(txc.ppsfreq, &utp->ppsfreq) || - __get_user(txc.jitter, &utp->jitter) || - __get_user(txc.shift, &utp->shift) || - __get_user(txc.stabil, &utp->stabil) || - __get_user(txc.jitcnt, &utp->jitcnt) || - __get_user(txc.calcnt, &utp->calcnt) || - __get_user(txc.errcnt, &utp->errcnt) || - __get_user(txc.stbcnt, &utp->stbcnt)) - return -EFAULT; - - ret = do_adjtimex(&txc); - - if (put_user(txc.modes, &utp->modes) || - __put_user(txc.offset, &utp->offset) || - __put_user(txc.freq, &utp->freq) || - __put_user(txc.maxerror, &utp->maxerror) || - __put_user(txc.esterror, &utp->esterror) || - __put_user(txc.status, &utp->status) || - __put_user(txc.constant, &utp->constant) || - __put_user(txc.precision, &utp->precision) || - __put_user(txc.tolerance, &utp->tolerance) || - __put_user(txc.time.tv_sec, &utp->time.tv_sec) || - __put_user(txc.time.tv_usec, &utp->time.tv_usec) || - __put_user(txc.tick, &utp->tick) || - __put_user(txc.ppsfreq, &utp->ppsfreq) || - __put_user(txc.jitter, &utp->jitter) || - __put_user(txc.shift, &utp->shift) || - __put_user(txc.stabil, &utp->stabil) || - __put_user(txc.jitcnt, &utp->jitcnt) || - __put_user(txc.calcnt, &utp->calcnt) || - __put_user(txc.errcnt, &utp->errcnt) || - __put_user(txc.stbcnt, &utp->stbcnt)) - ret = -EFAULT; - - return ret; -} - /* This is just a version for 32-bit applications which does * not force O_LARGEFILE on. */ diff --git a/arch/sparc64/kernel/systbls.S b/arch/sparc64/kernel/systbls.S index c3adb7ac167..3b250f2318f 100644 --- a/arch/sparc64/kernel/systbls.S +++ b/arch/sparc64/kernel/systbls.S @@ -63,7 +63,7 @@ sys_call_table32: /*200*/ .word sys32_ssetmask, sys_sigsuspend, compat_sys_newlstat, sys_uselib, compat_sys_old_readdir .word sys32_readahead, sys32_socketcall, sys32_syslog, sys32_lookup_dcookie, sys32_fadvise64 /*210*/ .word sys32_fadvise64_64, sys32_tgkill, sys32_waitpid, sys_swapoff, sys32_sysinfo - .word sys32_ipc, sys32_sigreturn, sys_clone, sys32_ioprio_get, sys32_adjtimex + .word sys32_ipc, sys32_sigreturn, sys_clone, sys32_ioprio_get, compat_sys_adjtimex /*220*/ .word sys32_sigprocmask, sys_ni_syscall, sys32_delete_module, sys_ni_syscall, sys32_getpgid .word sys32_bdflush, sys32_sysfs, sys_nis_syscall, sys32_setfsuid16, sys32_setfsgid16 /*230*/ .word sys32_select, compat_sys_time, sys_nis_syscall, compat_sys_stime, compat_sys_statfs64 diff --git a/arch/x86_64/ia32/ia32entry.S b/arch/x86_64/ia32/ia32entry.S index 00dee176c08..7549a4389fb 100644 --- a/arch/x86_64/ia32/ia32entry.S +++ b/arch/x86_64/ia32/ia32entry.S @@ -501,7 +501,7 @@ ia32_sys_call_table: .quad sys_setdomainname .quad sys_uname .quad sys_modify_ldt - .quad sys32_adjtimex + .quad compat_sys_adjtimex .quad sys32_mprotect /* 125 */ .quad compat_sys_sigprocmask .quad quiet_ni_syscall /* create_module */ diff --git a/arch/x86_64/ia32/sys_ia32.c b/arch/x86_64/ia32/sys_ia32.c index b13121e451a..f182b20858e 100644 --- a/arch/x86_64/ia32/sys_ia32.c +++ b/arch/x86_64/ia32/sys_ia32.c @@ -30,7 +30,6 @@ #include #include #include -#include #include #include #include @@ -767,69 +766,6 @@ sys32_sendfile(int out_fd, int in_fd, compat_off_t __user *offset, s32 count) return ret; } -/* Handle adjtimex compatibility. */ - -extern int do_adjtimex(struct timex *); - -asmlinkage long -sys32_adjtimex(struct compat_timex __user *utp) -{ - struct timex txc; - int ret; - - memset(&txc, 0, sizeof(struct timex)); - - if (!access_ok(VERIFY_READ, utp, sizeof(struct compat_timex)) || - __get_user(txc.modes, &utp->modes) || - __get_user(txc.offset, &utp->offset) || - __get_user(txc.freq, &utp->freq) || - __get_user(txc.maxerror, &utp->maxerror) || - __get_user(txc.esterror, &utp->esterror) || - __get_user(txc.status, &utp->status) || - __get_user(txc.constant, &utp->constant) || - __get_user(txc.precision, &utp->precision) || - __get_user(txc.tolerance, &utp->tolerance) || - __get_user(txc.time.tv_sec, &utp->time.tv_sec) || - __get_user(txc.time.tv_usec, &utp->time.tv_usec) || - __get_user(txc.tick, &utp->tick) || - __get_user(txc.ppsfreq, &utp->ppsfreq) || - __get_user(txc.jitter, &utp->jitter) || - __get_user(txc.shift, &utp->shift) || - __get_user(txc.stabil, &utp->stabil) || - __get_user(txc.jitcnt, &utp->jitcnt) || - __get_user(txc.calcnt, &utp->calcnt) || - __get_user(txc.errcnt, &utp->errcnt) || - __get_user(txc.stbcnt, &utp->stbcnt)) - return -EFAULT; - - ret = do_adjtimex(&txc); - - if (!access_ok(VERIFY_WRITE, utp, sizeof(struct compat_timex)) || - __put_user(txc.modes, &utp->modes) || - __put_user(txc.offset, &utp->offset) || - __put_user(txc.freq, &utp->freq) || - __put_user(txc.maxerror, &utp->maxerror) || - __put_user(txc.esterror, &utp->esterror) || - __put_user(txc.status, &utp->status) || - __put_user(txc.constant, &utp->constant) || - __put_user(txc.precision, &utp->precision) || - __put_user(txc.tolerance, &utp->tolerance) || - __put_user(txc.time.tv_sec, &utp->time.tv_sec) || - __put_user(txc.time.tv_usec, &utp->time.tv_usec) || - __put_user(txc.tick, &utp->tick) || - __put_user(txc.ppsfreq, &utp->ppsfreq) || - __put_user(txc.jitter, &utp->jitter) || - __put_user(txc.shift, &utp->shift) || - __put_user(txc.stabil, &utp->stabil) || - __put_user(txc.jitcnt, &utp->jitcnt) || - __put_user(txc.calcnt, &utp->calcnt) || - __put_user(txc.errcnt, &utp->errcnt) || - __put_user(txc.stbcnt, &utp->stbcnt)) - ret = -EFAULT; - - return ret; -} - asmlinkage long sys32_mmap2(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, unsigned long fd, unsigned long pgoff) -- cgit v1.2.3-18-g5258 From d6d21dfdd305bf94300df13ff472141d3411ea17 Mon Sep 17 00:00:00 2001 From: Darren Jenkins Date: Sun, 26 Mar 2006 01:37:34 -0800 Subject: [PATCH] fix array overrun in efi.c Coverity found an over-run @ line 364 of efi.c This is due to the loop checking the size correctly, then adding a '\0' after possibly hitting the end of the array. Ensure the loop exits with one space left in the array. Signed-off-by: Darren Jenkins Signed-off-by: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/efi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/i386/kernel/efi.c b/arch/i386/kernel/efi.c index c224c2aebba..9202b67c4b2 100644 --- a/arch/i386/kernel/efi.c +++ b/arch/i386/kernel/efi.c @@ -361,7 +361,7 @@ void __init efi_init(void) */ c16 = (efi_char16_t *) boot_ioremap(efi.systab->fw_vendor, 2); if (c16) { - for (i = 0; i < sizeof(vendor) && *c16; ++i) + for (i = 0; i < (sizeof(vendor) - 1) && *c16; ++i) vendor[i] = *c16++; vendor[i] = '\0'; } else -- cgit v1.2.3-18-g5258 From b50ea74c7bc3ebe3d88a357893f0b96ae9092f13 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Sun, 26 Mar 2006 01:38:13 -0800 Subject: [PATCH] kprobes: clean up resume_execute() Clean up kprobe's resume_execute() for i386 arch. Signed-off-by: Masami Hiramatsu Cc: Prasanna S Panchamukhi Cc: Ananth N Mavinakayanahalli Cc: Anil S Keshavamurthy Cc: David S. Miller Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/kprobes.c | 26 ++++++++++---------------- 1 file changed, 10 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/kprobes.c b/arch/i386/kernel/kprobes.c index 7a59050242a..b40614f5afe 100644 --- a/arch/i386/kernel/kprobes.c +++ b/arch/i386/kernel/kprobes.c @@ -362,10 +362,10 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb) { unsigned long *tos = (unsigned long *)®s->esp; - unsigned long next_eip = 0; unsigned long copy_eip = (unsigned long)p->ainsn.insn; unsigned long orig_eip = (unsigned long)p->addr; + regs->eflags &= ~TF_MASK; switch (p->ainsn.insn[0]) { case 0x9c: /* pushfl */ *tos &= ~(TF_MASK | IF_MASK); @@ -375,9 +375,9 @@ static void __kprobes resume_execution(struct kprobe *p, case 0xcb: case 0xc2: case 0xca: - regs->eflags &= ~TF_MASK; - /* eip is already adjusted, no more changes required*/ - return; + case 0xea: /* jmp absolute -- eip is correct */ + /* eip is already adjusted, no more changes required */ + goto no_change; case 0xe8: /* call relative - Fix return addr */ *tos = orig_eip + (*tos - copy_eip); break; @@ -385,27 +385,21 @@ static void __kprobes resume_execution(struct kprobe *p, if ((p->ainsn.insn[1] & 0x30) == 0x10) { /* call absolute, indirect */ /* Fix return addr; eip is correct. */ - next_eip = regs->eip; *tos = orig_eip + (*tos - copy_eip); + goto no_change; } else if (((p->ainsn.insn[1] & 0x31) == 0x20) || /* jmp near, absolute indirect */ ((p->ainsn.insn[1] & 0x31) == 0x21)) { /* jmp far, absolute indirect */ /* eip is correct. */ - next_eip = regs->eip; + goto no_change; } - break; - case 0xea: /* jmp absolute -- eip is correct */ - next_eip = regs->eip; - break; default: break; } - regs->eflags &= ~TF_MASK; - if (next_eip) { - regs->eip = next_eip; - } else { - regs->eip = orig_eip + (regs->eip - copy_eip); - } + regs->eip = orig_eip + (regs->eip - copy_eip); + +no_change: + return; } /* -- cgit v1.2.3-18-g5258 From 311ac88fd2d4194a95e9e38d2fe08917be98723c Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Sun, 26 Mar 2006 01:38:17 -0800 Subject: [PATCH] x86: kprobes-booster Current kprobe copies the original instruction at the probe point and replaces it with a breakpoint instruction (int3). When the kernel hits the probe point, kprobe handler is invoked. And the copied instruction is single-step executed on the copied buffer (not on the original address) by kprobe. After that, the kprobe checks registers and modify it (if need) as if the instructions was executed on the original address. My proposal is based on the fact there are many instructions which do NOT require the register modification after the single-step execution. When the copied instruction is a kind of them, kprobe just jumps back to the next instruction after single-step execution. If so, why don't we execute those instructions directly? With kprobe-booster patch, kprobes will execute a copied instruction directly and (if need) jump back to original code. This direct execution is executed when the kprobe don't have both post_handler and break_handler, and the copied instruction can be executed directly. I sorted instructions which can be executed directly or not; - Call instructions are NG(can not be executed directly). We should correct the return address pushed into top of stack. - Indirect instructions except for absolute indirect-jumps are NG. Those instructions changes EIP randomly. We should check EIP and correct it. - Instructions that change EIP beyond the range of the instruction buffer are NG. - Instructions that change EIP to tail 5 bytes of the instruction buffer (it is the size of a jump instruction). We must write a jump instruction which backs to original kernel code in the instruction buffer. - Break point instruction is NG. We should not touch EIP and pass to other handlers. - Absolute direct/indirect jumps are OK.- Conditional Jumps are NG. - Halt and software-interruptions are NG. Because it will stay on the instruction buffer of kprobes. - Prefixes are NG. - Unknown/reserved opcode is NG. - Other 1 byte instructions are OK. But those instructions need a jump back code. - 2 bytes instructions are mapped sparsely. So, in this release, this patch don't boost those instructions. >From Intel's IA-32 opcode map described in IA-32 Intel Architecture Software Developer's Manual Vol.2 B, I determined that following opcodes are not boostable. - 0FH (2byte escape) - 70H - 7FH (Jump on condition) - 9AH (Call) and 9CH (Pushf) - C0H-C1H (Grp 2: includes reserved opcode) - C6H-C7H (Grp11: includes reserved opcode) - CCH-CEH (Software-interrupt) - D0H-D3H (Grp2: includes reserved opcode) - D6H (Reserved) - D8H-DFH (Coprocessor) - E0H-E3H (loop/conditional jump) - E8H (Call) - F0H-F3H (Prefixes and reserved) - F4H (Halt) - F6H-F7H (Grp3: includes reserved opcode) - FEH-FFH(Grp4,5: includes reserved opcode) Kprobe-booster checks whether target instruction can be boosted (can be executed directly) at arch_copy_kprobe() function. If the target instruction can be boosted, it clears "boostable" flag. If not, it sets "boostable" flag -1. This is disabled status. In resume_execution() function, If "boostable" flag is cleared, kprobe-booster measures the size of the target instruction and sets "boostable" flag 1. In kprobe_handler(), kprobe checks the "boostable" flag. If the flag is 1, it resets current kprobe and executes instruction buffer directly instead of single stepping. When unregistering a boosted kprobe, it calls synchronize_sched() after "int3" is removed. So we can ensure followings after the synchronize_sched() called. - interrupt handlers are finished on all CPUs. - instruction buffer is not executed on all CPUs. And we can release the boosted kprobe safely. And also, on preemptible kernel, the booster is not enabled where the kernel preemption is enabled. So, there are no preempted threads on the instruction buffer. The description of kretprobe-booster: ==================================== In the normal operation, kretprobe make a target function return to trampoline code. And a kprobe (called trampoline_probe) have been inserted at the trampoline code. When the kernel hits this kprobe, it calls kretprobe's handler and it returns to original return address. Kretprobe-booster patch removes the trampoline_probe. It allows the trampoline code to call kretprobe's handler directly instead of invoking kprobe. And tranpoline code returns to original return address. This new trampoline code stores and restores registers, so the kretprobe handler is still able to access those registers. Current kprobe has about 1.3 usec/probe(*) overhead, and kprobe-booster patch reduces it to 0.6 usec/probe(*). Also current kretprobe has about 2.0 usec/probe(*) overhead. Kprobe-booster patch reduces it to 1.3 usec/probe(*), and the combination of both kprobe-booster patch and kretprobe-booster patch reduces it to 0.9 usec/probe(*). I expect the combination of both patches can reduce half of a probing overhead. Performance numbers strongly depend on the processor model. Andrew Morton wrote: > These preempt tricks look rather nasty. Can you please describe what the > problem is, precisely? And how this code avoids it? Perhaps we can find > something cleaner. The problem is how to remove the copied instructions of the kprobe *safely* on the preemptable kernel (CONFIG_PREEMPT=y). Kprobes basically executes the following actions; (1)int3 (2)preempt_disable() (3)kprobe_prehandler() (4)copied instructioin(single step) (5)kprobe_posthandler() (6)preempt_enable() (7)return to the original code During the execution of copied instruction, preemption is disabled (from step (2) to (6)). When unregistering the probes, Kprobe waits for RCU quiescent state by using synchronize_sched() after removing int3 instruction. Thus we can ensure the copied instruction is not executed. On the other hand, kprobe-booster executes the following actions; (1)int3 (2)preempt_disable() (3)kprobe_prehandler() (4)preempt_enable() <-- this one is added by my patch (5)copied instruction(direct execution) (6)jmp back to the original code The problem is that we have no way to prevent preemption on step (5) or (6). We cannot call preempt_disable() after step (6), because there are no rooms to do that. Thus, some other processes may be preempted at step(5) or (6) on preemptable kernel. And I couldn't find the easy way to ensure that other processes' stack do *not* have the address of them. (I thought some way to do that, but those are very costly.) So currently, I simply boost the kprobe only when the probe point is already preemption disabled. > Also, the patch adds a preempt_enable() but I don't see a corresponding > preempt_disable(). Am I missing something? It is corresponding to the preempt_disable() in the top of kprobe_handler(). I copied the code of kprobe_handler() here: static int __kprobes kprobe_handler(struct pt_regs *regs) { struct kprobe *p; int ret = 0; kprobe_opcode_t *addr = NULL; unsigned long *lp; struct kprobe_ctlblk *kcb; /* * We don't want to be preempted for the entire * duration of kprobe processing */ preempt_disable(); <-- HERE kcb = get_kprobe_ctlblk(); Signed-off-by: Masami Hiramatsu Cc: Prasanna S Panchamukhi Cc: Ananth N Mavinakayanahalli Cc: Anil S Keshavamurthy Cc: David S. Miller Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/kprobes.c | 92 +++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 90 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/kprobes.c b/arch/i386/kernel/kprobes.c index b40614f5afe..137bf612141 100644 --- a/arch/i386/kernel/kprobes.c +++ b/arch/i386/kernel/kprobes.c @@ -41,6 +41,49 @@ void jprobe_return_end(void); DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL; DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); +/* insert a jmp code */ +static inline void set_jmp_op(void *from, void *to) +{ + struct __arch_jmp_op { + char op; + long raddr; + } __attribute__((packed)) *jop; + jop = (struct __arch_jmp_op *)from; + jop->raddr = (long)(to) - ((long)(from) + 5); + jop->op = RELATIVEJUMP_INSTRUCTION; +} + +/* + * returns non-zero if opcodes can be boosted. + */ +static inline int can_boost(kprobe_opcode_t opcode) +{ + switch (opcode & 0xf0 ) { + case 0x70: + return 0; /* can't boost conditional jump */ + case 0x90: + /* can't boost call and pushf */ + return opcode != 0x9a && opcode != 0x9c; + case 0xc0: + /* can't boost undefined opcodes and soft-interruptions */ + return (0xc1 < opcode && opcode < 0xc6) || + (0xc7 < opcode && opcode < 0xcc) || opcode == 0xcf; + case 0xd0: + /* can boost AA* and XLAT */ + return (opcode == 0xd4 || opcode == 0xd5 || opcode == 0xd7); + case 0xe0: + /* can boost in/out and (may be) jmps */ + return (0xe3 < opcode && opcode != 0xe8); + case 0xf0: + /* clear and set flags can be boost */ + return (opcode == 0xf5 || (0xf7 < opcode && opcode < 0xfe)); + default: + /* currently, can't boost 2 bytes opcodes */ + return opcode != 0x0f; + } +} + + /* * returns non-zero if opcode modifies the interrupt flag. */ @@ -65,6 +108,11 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p) memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t)); p->opcode = *p->addr; + if (can_boost(p->opcode)) { + p->ainsn.boostable = 0; + } else { + p->ainsn.boostable = -1; + } return 0; } @@ -158,6 +206,9 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) kprobe_opcode_t *addr = NULL; unsigned long *lp; struct kprobe_ctlblk *kcb; +#ifdef CONFIG_PREEMPT + unsigned pre_preempt_count = preempt_count(); +#endif /* CONFIG_PREEMPT */ /* * We don't want to be preempted for the entire @@ -252,6 +303,21 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) /* handler has already set things up, so skip ss setup */ return 1; + if (p->ainsn.boostable == 1 && +#ifdef CONFIG_PREEMPT + !(pre_preempt_count) && /* + * This enables booster when the direct + * execution path aren't preempted. + */ +#endif /* CONFIG_PREEMPT */ + !p->post_handler && !p->break_handler ) { + /* Boost up -- we can execute copied instructions directly */ + reset_current_kprobe(); + regs->eip = (unsigned long)p->ainsn.insn; + preempt_enable_no_resched(); + return 1; + } + ss_probe: prepare_singlestep(p, regs); kcb->kprobe_status = KPROBE_HIT_SS; @@ -357,6 +423,8 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) * 2) If the single-stepped instruction was a call, the return address * that is atop the stack is the address following the copied instruction. * We need to make it the address following the original instruction. + * + * This function also checks instruction size for preparing direct execution. */ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb) @@ -377,6 +445,7 @@ static void __kprobes resume_execution(struct kprobe *p, case 0xca: case 0xea: /* jmp absolute -- eip is correct */ /* eip is already adjusted, no more changes required */ + p->ainsn.boostable = 1; goto no_change; case 0xe8: /* call relative - Fix return addr */ *tos = orig_eip + (*tos - copy_eip); @@ -384,18 +453,37 @@ static void __kprobes resume_execution(struct kprobe *p, case 0xff: if ((p->ainsn.insn[1] & 0x30) == 0x10) { /* call absolute, indirect */ - /* Fix return addr; eip is correct. */ + /* + * Fix return addr; eip is correct. + * But this is not boostable + */ *tos = orig_eip + (*tos - copy_eip); goto no_change; } else if (((p->ainsn.insn[1] & 0x31) == 0x20) || /* jmp near, absolute indirect */ ((p->ainsn.insn[1] & 0x31) == 0x21)) { /* jmp far, absolute indirect */ - /* eip is correct. */ + /* eip is correct. And this is boostable */ + p->ainsn.boostable = 1; goto no_change; } default: break; } + if (p->ainsn.boostable == 0) { + if ((regs->eip > copy_eip) && + (regs->eip - copy_eip) + 5 < MAX_INSN_SIZE) { + /* + * These instructions can be executed directly if it + * jumps back to correct address. + */ + set_jmp_op((void *)regs->eip, + (void *)orig_eip + (regs->eip - copy_eip)); + p->ainsn.boostable = 1; + } else { + p->ainsn.boostable = -1; + } + } + regs->eip = orig_eip + (regs->eip - copy_eip); no_change: -- cgit v1.2.3-18-g5258 From c9becf58d935265919bf1cb348b2c04492c8949d Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Sun, 26 Mar 2006 01:38:19 -0800 Subject: [PATCH] kretprobe: kretprobe-booster In normal operation, kretprobe makes a target function return to trampoline code. A kprobe (called trampoline_probe) has been inserted in the trampoline code. When the kernel hits this kprobe, it calls kretprobe's handler and it returns to the original return address. Kretprobe-booster removes the trampoline_probe. It allows the trampoline code to call kretprobe's handler directly instead of invoking kprobe. The trampoline code returns to the original return address. (changelog from Chuck Ebbert <76306.1226@compuserve.com> - thanks ;)) Signed-off-by: Masami Hiramatsu Cc: Prasanna S Panchamukhi Cc: Ananth N Mavinakayanahalli Cc: Anil S Keshavamurthy Cc: David S. Miller Cc: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/kprobes.c | 61 +++++++++++++++++++++++++++++----------------- 1 file changed, 39 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/kprobes.c b/arch/i386/kernel/kprobes.c index 137bf612141..acdcc640a72 100644 --- a/arch/i386/kernel/kprobes.c +++ b/arch/i386/kernel/kprobes.c @@ -333,17 +333,44 @@ no_kprobe: * here. When a retprobed function returns, this probe is hit and * trampoline_probe_handler() runs, calling the kretprobe's handler. */ - void kretprobe_trampoline_holder(void) + void __kprobes kretprobe_trampoline_holder(void) { - asm volatile ( ".global kretprobe_trampoline\n" + asm volatile ( ".global kretprobe_trampoline\n" "kretprobe_trampoline: \n" - "nop\n"); - } + " pushf\n" + /* skip cs, eip, orig_eax, es, ds */ + " subl $20, %esp\n" + " pushl %eax\n" + " pushl %ebp\n" + " pushl %edi\n" + " pushl %esi\n" + " pushl %edx\n" + " pushl %ecx\n" + " pushl %ebx\n" + " movl %esp, %eax\n" + " call trampoline_handler\n" + /* move eflags to cs */ + " movl 48(%esp), %edx\n" + " movl %edx, 44(%esp)\n" + /* save true return address on eflags */ + " movl %eax, 48(%esp)\n" + " popl %ebx\n" + " popl %ecx\n" + " popl %edx\n" + " popl %esi\n" + " popl %edi\n" + " popl %ebp\n" + " popl %eax\n" + /* skip eip, orig_eax, es, ds */ + " addl $16, %esp\n" + " popf\n" + " ret\n"); +} /* - * Called when we hit the probe point at kretprobe_trampoline + * Called from kretprobe_trampoline */ -int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) +fastcall void *__kprobes trampoline_handler(struct pt_regs *regs) { struct kretprobe_instance *ri = NULL; struct hlist_head *head; @@ -372,8 +399,11 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) /* another task is sharing our hash bucket */ continue; - if (ri->rp && ri->rp->handler) + if (ri->rp && ri->rp->handler){ + __get_cpu_var(current_kprobe) = &ri->rp->kp; ri->rp->handler(ri, regs); + __get_cpu_var(current_kprobe) = NULL; + } orig_ret_address = (unsigned long)ri->ret_addr; recycle_rp_inst(ri); @@ -388,18 +418,10 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) } BUG_ON(!orig_ret_address || (orig_ret_address == trampoline_address)); - regs->eip = orig_ret_address; - reset_current_kprobe(); spin_unlock_irqrestore(&kretprobe_lock, flags); - preempt_enable_no_resched(); - /* - * By returning a non-zero value, we are telling - * kprobe_handler() that we don't want the post_handler - * to run (and have re-enabled preemption) - */ - return 1; + return (void*)orig_ret_address; } /* @@ -646,12 +668,7 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) return 0; } -static struct kprobe trampoline_p = { - .addr = (kprobe_opcode_t *) &kretprobe_trampoline, - .pre_handler = trampoline_probe_handler -}; - int __init arch_init_kprobes(void) { - return register_kprobe(&trampoline_p); + return 0; } -- cgit v1.2.3-18-g5258 From c6fd91f0bdcd294a0ae0ba2b2a7f7456ef4b7144 Mon Sep 17 00:00:00 2001 From: bibo mao Date: Sun, 26 Mar 2006 01:38:20 -0800 Subject: [PATCH] kretprobe instance recycled by parent process When kretprobe probes the schedule() function, if the probed process exits then schedule() will never return, so some kretprobe instances will never be recycled. In this patch the parent process will recycle retprobe instances of the probed function and there will be no memory leak of kretprobe instances. Signed-off-by: bibo mao Cc: Masami Hiramatsu Cc: Prasanna S Panchamukhi Cc: Ananth N Mavinakayanahalli Cc: Anil S Keshavamurthy Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/process.c | 8 -------- arch/ia64/kernel/process.c | 8 -------- arch/powerpc/kernel/process.c | 2 -- arch/x86_64/kernel/process.c | 9 +-------- 4 files changed, 1 insertion(+), 26 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/process.c b/arch/i386/kernel/process.c index 299e6167408..24b3e745478 100644 --- a/arch/i386/kernel/process.c +++ b/arch/i386/kernel/process.c @@ -38,7 +38,6 @@ #include #include #include -#include #include #include @@ -364,13 +363,6 @@ void exit_thread(void) struct task_struct *tsk = current; struct thread_struct *t = &tsk->thread; - /* - * Remove function-return probe instances associated with this task - * and put them back on the free list. Do not insert an exit probe for - * this function, it will be disabled by kprobe_flush_task if you do. - */ - kprobe_flush_task(tsk); - /* The process may have allocated an io port bitmap... nuke it. */ if (unlikely(NULL != t->io_bitmap_ptr)) { int cpu = get_cpu(); diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c index 309d59658e5..355d57970ba 100644 --- a/arch/ia64/kernel/process.c +++ b/arch/ia64/kernel/process.c @@ -30,7 +30,6 @@ #include #include #include -#include #include #include @@ -738,13 +737,6 @@ void exit_thread (void) { - /* - * Remove function-return probe instances associated with this task - * and put them back on the free list. Do not insert an exit probe for - * this function, it will be disabled by kprobe_flush_task if you do. - */ - kprobe_flush_task(current); - ia64_drop_fpu(current); #ifdef CONFIG_PERFMON /* if needed, stop monitoring and flush state to perfmon context */ diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 1770a066c21..f698aa77127 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -35,7 +35,6 @@ #include #include #include -#include #include #include @@ -460,7 +459,6 @@ void show_regs(struct pt_regs * regs) void exit_thread(void) { - kprobe_flush_task(current); discard_lazy_cpu_state(); } diff --git a/arch/x86_64/kernel/process.c b/arch/x86_64/kernel/process.c index 81111835722..0370720515f 100644 --- a/arch/x86_64/kernel/process.c +++ b/arch/x86_64/kernel/process.c @@ -35,8 +35,8 @@ #include #include #include -#include #include +#include #include #include @@ -353,13 +353,6 @@ void exit_thread(void) struct task_struct *me = current; struct thread_struct *t = &me->thread; - /* - * Remove function-return probe instances associated with this task - * and put them back on the free list. Do not insert an exit probe for - * this function, it will be disabled by kprobe_flush_task if you do. - */ - kprobe_flush_task(me); - if (me->thread.io_bitmap_ptr) { struct tss_struct *tss = &per_cpu(init_tss, get_cpu()); -- cgit v1.2.3-18-g5258 From 2326c77017c79fd6d55c69d8a49a57a252921bcd Mon Sep 17 00:00:00 2001 From: "bibo,mao" Date: Sun, 26 Mar 2006 01:38:21 -0800 Subject: [PATCH] kprobe handler: discard user space trap Currently kprobe handler traps only happen in kernel space, so function kprobe_exceptions_notify should skip traps which happen in user space. This patch modifies this, and it is based on 2.6.16-rc4. Signed-off-by: bibo mao Cc: Ananth N Mavinakayanahalli Cc: "Keshavamurthy, Anil S" Cc: Signed-off-by: Prasanna S Panchamukhi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/kprobes.c | 19 ++++++------------- arch/ia64/kernel/kprobes.c | 3 +++ arch/powerpc/kernel/kprobes.c | 3 +++ arch/sparc64/kernel/kprobes.c | 3 +++ arch/x86_64/kernel/kprobes.c | 3 +++ 5 files changed, 18 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/kprobes.c b/arch/i386/kernel/kprobes.c index acdcc640a72..df1b346d36f 100644 --- a/arch/i386/kernel/kprobes.c +++ b/arch/i386/kernel/kprobes.c @@ -203,13 +203,14 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) { struct kprobe *p; int ret = 0; - kprobe_opcode_t *addr = NULL; - unsigned long *lp; + kprobe_opcode_t *addr; struct kprobe_ctlblk *kcb; #ifdef CONFIG_PREEMPT unsigned pre_preempt_count = preempt_count(); #endif /* CONFIG_PREEMPT */ + addr = (kprobe_opcode_t *)(regs->eip - sizeof(kprobe_opcode_t)); + /* * We don't want to be preempted for the entire * duration of kprobe processing @@ -217,17 +218,6 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) preempt_disable(); kcb = get_kprobe_ctlblk(); - /* Check if the application is using LDT entry for its code segment and - * calculate the address by reading the base address from the LDT entry. - */ - if ((regs->xcs & 4) && (current->mm)) { - lp = (unsigned long *) ((unsigned long)((regs->xcs >> 3) * 8) - + (char *) current->mm->context.ldt); - addr = (kprobe_opcode_t *) (get_desc_base(lp) + regs->eip - - sizeof(kprobe_opcode_t)); - } else { - addr = (kprobe_opcode_t *)(regs->eip - sizeof(kprobe_opcode_t)); - } /* Check we're not actually recursing */ if (kprobe_running()) { p = get_kprobe(addr); @@ -579,6 +569,9 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, struct die_args *args = (struct die_args *)data; int ret = NOTIFY_DONE; + if (args->regs && user_mode(args->regs)) + return ret; + switch (val) { case DIE_INT3: if (kprobe_handler(args->regs)) diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c index 50ae8c7d453..45b8479c986 100644 --- a/arch/ia64/kernel/kprobes.c +++ b/arch/ia64/kernel/kprobes.c @@ -740,6 +740,9 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, struct die_args *args = (struct die_args *)data; int ret = NOTIFY_DONE; + if (args->regs && user_mode(args->regs)) + return ret; + switch(val) { case DIE_BREAK: /* err is break number from ia64_bad_break() */ diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c index cb1fe5878e8..aea25dd18da 100644 --- a/arch/powerpc/kernel/kprobes.c +++ b/arch/powerpc/kernel/kprobes.c @@ -396,6 +396,9 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, struct die_args *args = (struct die_args *)data; int ret = NOTIFY_DONE; + if (args->regs && user_mode(args->regs)) + return ret; + switch (val) { case DIE_BPT: if (kprobe_handler(args->regs)) diff --git a/arch/sparc64/kernel/kprobes.c b/arch/sparc64/kernel/kprobes.c index b9a9ce70e55..d91c31870ac 100644 --- a/arch/sparc64/kernel/kprobes.c +++ b/arch/sparc64/kernel/kprobes.c @@ -324,6 +324,9 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, struct die_args *args = (struct die_args *)data; int ret = NOTIFY_DONE; + if (args->regs && user_mode(args->regs)) + return ret; + switch (val) { case DIE_DEBUG: if (kprobe_handler(args->regs)) diff --git a/arch/x86_64/kernel/kprobes.c b/arch/x86_64/kernel/kprobes.c index 14f0ced613b..218e015c319 100644 --- a/arch/x86_64/kernel/kprobes.c +++ b/arch/x86_64/kernel/kprobes.c @@ -601,6 +601,9 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, struct die_args *args = (struct die_args *)data; int ret = NOTIFY_DONE; + if (args->regs && user_mode(args->regs)) + return ret; + switch (val) { case DIE_INT3: if (kprobe_handler(args->regs)) -- cgit v1.2.3-18-g5258 From b4026513b88e7eaa52a31117e2b7bafdc1e40ef1 Mon Sep 17 00:00:00 2001 From: Prasanna S Panchamukhi Date: Sun, 26 Mar 2006 01:38:22 -0800 Subject: [PATCH] kprobes: fix broken fault handling for i386 Provide proper kprobes fault handling, if a user-specified pre/post handlers tries to access user address space, through copy_from_user(), get_user() etc. The user-specified fault handler gets called only if the fault occurs while executing user-specified handlers. In such a case user-specified handler is allowed to fix it first, later if the user-specifed fault handler does not fix it, we try to fix it by calling fix_exception(). The user-specified handler will not be called if the fault happens when single stepping the original instruction, instead we reset the current probe and allow the system page fault handler to fix it up. Signed-off-by: Prasanna S Panchamukhi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/kprobes.c | 57 ++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 50 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/kprobes.c b/arch/i386/kernel/kprobes.c index df1b346d36f..f19768789e8 100644 --- a/arch/i386/kernel/kprobes.c +++ b/arch/i386/kernel/kprobes.c @@ -35,6 +35,7 @@ #include #include #include +#include void jprobe_return_end(void); @@ -547,15 +548,57 @@ static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) struct kprobe *cur = kprobe_running(); struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) - return 1; - - if (kcb->kprobe_status & KPROBE_HIT_SS) { - resume_execution(cur, regs, kcb); + switch(kcb->kprobe_status) { + case KPROBE_HIT_SS: + case KPROBE_REENTER: + /* + * We are here because the instruction being single + * stepped caused a page fault. We reset the current + * kprobe and the eip points back to the probe address + * and allow the page fault handler to continue as a + * normal page fault. + */ + regs->eip = (unsigned long)cur->addr; regs->eflags |= kcb->kprobe_old_eflags; - - reset_current_kprobe(); + if (kcb->kprobe_status == KPROBE_REENTER) + restore_previous_kprobe(kcb); + else + reset_current_kprobe(); preempt_enable_no_resched(); + break; + case KPROBE_HIT_ACTIVE: + case KPROBE_HIT_SSDONE: + /* + * We increment the nmissed count for accounting, + * we can also use npre/npostfault count for accouting + * these specific fault cases. + */ + kprobes_inc_nmissed_count(cur); + + /* + * We come here because instructions in the pre/post + * handler caused the page_fault, this could happen + * if handler tries to access user space by + * copy_from_user(), get_user() etc. Let the + * user-specified handler try to fix it first. + */ + if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) + return 1; + + /* + * In case the user-specified fault handler returned + * zero, try to fix up. + */ + if (fixup_exception(regs)) + return 1; + + /* + * fixup_exception() could not handle it, + * Let do_page_fault() fix it. + */ + break; + default: + break; } return 0; } -- cgit v1.2.3-18-g5258 From c28f896634f2c931a298490deab3861ab117716a Mon Sep 17 00:00:00 2001 From: Prasanna S Panchamukhi Date: Sun, 26 Mar 2006 01:38:23 -0800 Subject: [PATCH] kprobes: fix broken fault handling for x86_64 Provide proper kprobes fault handling, if a user-specified pre/post handlers tries to access user address space, through copy_from_user(), get_user() etc. The user-specified fault handler gets called only if the fault occurs while executing user-specified handlers. In such a case user-specified handler is allowed to fix it first, later if the user-specifed fault handler does not fix it, we try to fix it by calling fix_exception(). The user-specified handler will not be called if the fault happens when single stepping the original instruction, instead we reset the current probe and allow the system page fault handler to fix it up. Signed-off-by: Prasanna S Panchamukhi Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/kprobes.c | 62 +++++++++++++++++++++++++++++++++++++++----- 1 file changed, 55 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/kprobes.c b/arch/x86_64/kernel/kprobes.c index 218e015c319..accbff3fec4 100644 --- a/arch/x86_64/kernel/kprobes.c +++ b/arch/x86_64/kernel/kprobes.c @@ -37,10 +37,12 @@ #include #include #include +#include #include #include #include +#include void jprobe_return_end(void); static void __kprobes arch_copy_kprobe(struct kprobe *p); @@ -578,16 +580,62 @@ int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr) { struct kprobe *cur = kprobe_running(); struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + const struct exception_table_entry *fixup; - if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) - return 1; - - if (kcb->kprobe_status & KPROBE_HIT_SS) { - resume_execution(cur, regs, kcb); + switch(kcb->kprobe_status) { + case KPROBE_HIT_SS: + case KPROBE_REENTER: + /* + * We are here because the instruction being single + * stepped caused a page fault. We reset the current + * kprobe and the rip points back to the probe address + * and allow the page fault handler to continue as a + * normal page fault. + */ + regs->rip = (unsigned long)cur->addr; regs->eflags |= kcb->kprobe_old_rflags; - - reset_current_kprobe(); + if (kcb->kprobe_status == KPROBE_REENTER) + restore_previous_kprobe(kcb); + else + reset_current_kprobe(); preempt_enable_no_resched(); + break; + case KPROBE_HIT_ACTIVE: + case KPROBE_HIT_SSDONE: + /* + * We increment the nmissed count for accounting, + * we can also use npre/npostfault count for accouting + * these specific fault cases. + */ + kprobes_inc_nmissed_count(cur); + + /* + * We come here because instructions in the pre/post + * handler caused the page_fault, this could happen + * if handler tries to access user space by + * copy_from_user(), get_user() etc. Let the + * user-specified handler try to fix it first. + */ + if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) + return 1; + + /* + * In case the user-specified fault handler returned + * zero, try to fix up. + */ + fixup = search_exception_tables(regs->rip); + if (fixup) { + regs->rip = fixup->fixup; + return 1; + } + + /* + * fixup() could not handle it, + * Let do_page_fault() fix it. + */ + break; + default: + break; } return 0; } -- cgit v1.2.3-18-g5258 From 50e21f2b2861711b6df0b72ffef4a70d1532b023 Mon Sep 17 00:00:00 2001 From: Prasanna S Panchamukhi Date: Sun, 26 Mar 2006 01:38:24 -0800 Subject: [PATCH] kprobes: fix broken fault handling for powerpc64 Provide proper kprobes fault handling, if a user-specified pre/post handlers tries to access user address space, through copy_from_user(), get_user() etc. The user-specified fault handler gets called only if the fault occurs while executing user-specified handlers. In such a case user-specified handler is allowed to fix it first, later if the user-specifed fault handler does not fix it, we try to fix it by calling fix_exception(). The user-specified handler will not be called if the fault happens when single stepping the original instruction, instead we reset the current probe and allow the system page fault handler to fix it up. Signed-off-by: Prasanna S Panchamukhi Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/kernel/kprobes.c | 63 +++++++++++++++++++++++++++++++++++++------ 1 file changed, 55 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c index aea25dd18da..ad7a9021220 100644 --- a/arch/powerpc/kernel/kprobes.c +++ b/arch/powerpc/kernel/kprobes.c @@ -30,9 +30,11 @@ #include #include #include +#include #include #include #include +#include DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL; DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); @@ -372,17 +374,62 @@ static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) { struct kprobe *cur = kprobe_running(); struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - - if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) - return 1; - - if (kcb->kprobe_status & KPROBE_HIT_SS) { - resume_execution(cur, regs); + const struct exception_table_entry *entry; + + switch(kcb->kprobe_status) { + case KPROBE_HIT_SS: + case KPROBE_REENTER: + /* + * We are here because the instruction being single + * stepped caused a page fault. We reset the current + * kprobe and the nip points back to the probe address + * and allow the page fault handler to continue as a + * normal page fault. + */ + regs->nip = (unsigned long)cur->addr; regs->msr &= ~MSR_SE; regs->msr |= kcb->kprobe_saved_msr; - - reset_current_kprobe(); + if (kcb->kprobe_status == KPROBE_REENTER) + restore_previous_kprobe(kcb); + else + reset_current_kprobe(); preempt_enable_no_resched(); + break; + case KPROBE_HIT_ACTIVE: + case KPROBE_HIT_SSDONE: + /* + * We increment the nmissed count for accounting, + * we can also use npre/npostfault count for accouting + * these specific fault cases. + */ + kprobes_inc_nmissed_count(cur); + + /* + * We come here because instructions in the pre/post + * handler caused the page_fault, this could happen + * if handler tries to access user space by + * copy_from_user(), get_user() etc. Let the + * user-specified handler try to fix it first. + */ + if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) + return 1; + + /* + * In case the user-specified fault handler returned + * zero, try to fix up. + */ + if ((entry = search_exception_tables(regs->nip)) != NULL) { + regs->nip = entry->fixup; + return 1; + } + + /* + * fixup_exception() could not handle it, + * Let do_page_fault() fix it. + */ + break; + default: + break; } return 0; } -- cgit v1.2.3-18-g5258 From c04c1c81e211c2c95b548add7923e1d4ba4847ab Mon Sep 17 00:00:00 2001 From: Prasanna S Panchamukhi Date: Sun, 26 Mar 2006 01:38:25 -0800 Subject: [PATCH] kprobes: fix broken fault handling for ia64 Provide proper kprobes fault handling, if a user-specified pre/post handlers tries to access user address space, through copy_from_user(), get_user() etc. The user-specified fault handler gets called only if the fault occurs while executing user-specified handlers. In such a case user-specified handler is allowed to fix it first, later if the user-specifed fault handler does not fix it, we try to fix it by calling fix_exception(). The user-specified handler will not be called if the fault happens when single stepping the original instruction, instead we reset the current probe and allow the system page fault handler to fix it up. Signed-off-by: Prasanna S Panchamukhi Acked-by: Anil S Keshavamurthy Cc: "Luck, Tony" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ia64/kernel/kprobes.c | 48 +++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 43 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c index 45b8479c986..789881ca83d 100644 --- a/arch/ia64/kernel/kprobes.c +++ b/arch/ia64/kernel/kprobes.c @@ -34,6 +34,7 @@ #include #include #include +#include extern void jprobe_inst_return(void); @@ -722,13 +723,50 @@ static int __kprobes kprobes_fault_handler(struct pt_regs *regs, int trapnr) struct kprobe *cur = kprobe_running(); struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) - return 1; - if (kcb->kprobe_status & KPROBE_HIT_SS) { - resume_execution(cur, regs); - reset_current_kprobe(); + switch(kcb->kprobe_status) { + case KPROBE_HIT_SS: + case KPROBE_REENTER: + /* + * We are here because the instruction being single + * stepped caused a page fault. We reset the current + * kprobe and the instruction pointer points back to + * the probe address and allow the page fault handler + * to continue as a normal page fault. + */ + regs->cr_iip = ((unsigned long)cur->addr) & ~0xFULL; + ia64_psr(regs)->ri = ((unsigned long)cur->addr) & 0xf; + if (kcb->kprobe_status == KPROBE_REENTER) + restore_previous_kprobe(kcb); + else + reset_current_kprobe(); preempt_enable_no_resched(); + break; + case KPROBE_HIT_ACTIVE: + case KPROBE_HIT_SSDONE: + /* + * We increment the nmissed count for accounting, + * we can also use npre/npostfault count for accouting + * these specific fault cases. + */ + kprobes_inc_nmissed_count(cur); + + /* + * We come here because instructions in the pre/post + * handler caused the page_fault, this could happen + * if handler tries to access user space by + * copy_from_user(), get_user() etc. Let the + * user-specified handler try to fix it first. + */ + if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) + return 1; + + /* + * Let ia64_do_page_fault() fix it. + */ + break; + default: + break; } return 0; -- cgit v1.2.3-18-g5258 From b67000962f35313cfc5eabd675dc38b91678d9ed Mon Sep 17 00:00:00 2001 From: Prasanna S Panchamukhi Date: Sun, 26 Mar 2006 01:38:26 -0800 Subject: [PATCH] kprobes: fix broken fault handling for sparc64 Provide proper kprobes fault handling, if a user-specified pre/post handlers tries to access user address space, through copy_from_user(), get_user() etc. The user-specified fault handler gets called only if the fault occurs while executing user-specified handlers. In such a case user-specified handler is allowed to fix it first, later if the user-specifed fault handler does not fix it, we try to fix it by calling fix_exception(). The user-specified handler will not be called if the fault happens when single stepping the original instruction, instead we reset the current probe and allow the system page fault handler to fix it up. I could not test this patch for sparc64. Signed-off-by: Prasanna S Panchamukhi Cc: "David S. Miller" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/sparc64/kernel/kprobes.c | 66 +++++++++++++++++++++++++++++++++++++++---- 1 file changed, 60 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/kprobes.c b/arch/sparc64/kernel/kprobes.c index d91c31870ac..ffc7309e9f2 100644 --- a/arch/sparc64/kernel/kprobes.c +++ b/arch/sparc64/kernel/kprobes.c @@ -6,9 +6,11 @@ #include #include #include +#include #include #include #include +#include /* We do not have hardware single-stepping on sparc64. * So we implement software single-stepping with breakpoint @@ -302,16 +304,68 @@ static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) { struct kprobe *cur = kprobe_running(); struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + const struct exception_table_entry *entry; + + switch(kcb->kprobe_status) { + case KPROBE_HIT_SS: + case KPROBE_REENTER: + /* + * We are here because the instruction being single + * stepped caused a page fault. We reset the current + * kprobe and the tpc points back to the probe address + * and allow the page fault handler to continue as a + * normal page fault. + */ + regs->tpc = (unsigned long)cur->addr; + regs->tnpc = kcb->kprobe_orig_tnpc; + regs->tstate = ((regs->tstate & ~TSTATE_PIL) | + kcb->kprobe_orig_tstate_pil); + if (kcb->kprobe_status == KPROBE_REENTER) + restore_previous_kprobe(kcb); + else + reset_current_kprobe(); + preempt_enable_no_resched(); + break; + case KPROBE_HIT_ACTIVE: + case KPROBE_HIT_SSDONE: + /* + * We increment the nmissed count for accounting, + * we can also use npre/npostfault count for accouting + * these specific fault cases. + */ + kprobes_inc_nmissed_count(cur); + + /* + * We come here because instructions in the pre/post + * handler caused the page_fault, this could happen + * if handler tries to access user space by + * copy_from_user(), get_user() etc. Let the + * user-specified handler try to fix it first. + */ + if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) + return 1; - if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) - return 1; + /* + * In case the user-specified fault handler returned + * zero, try to fix up. + */ - if (kcb->kprobe_status & KPROBE_HIT_SS) { - resume_execution(cur, regs, kcb); + entry = search_exception_tables(regs->tpc); + if (entry) { + regs->tpc = entry->fixup; + regs->tnpc = regs->tpc + 4; + return 1; + } - reset_current_kprobe(); - preempt_enable_no_resched(); + /* + * fixup_exception() could not handle it, + * Let do_page_fault() fix it. + */ + break; + default: + break; } + return 0; } -- cgit v1.2.3-18-g5258 From 0f7217f4accad73e0a86febadb5a5d6e74ff7c37 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sun, 26 Mar 2006 01:38:57 -0800 Subject: [PATCH] frv: remove unnesesary "&" Fix warning messages triggered by bitops code consolidation patches. cxn_bitmap is the array of unsigned long. '&' is unnesesary for the argument of *_bit() routins. Signed-off-by: Akinobu Mita Acked-by: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/frv/mm/mmu-context.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/frv/mm/mmu-context.c b/arch/frv/mm/mmu-context.c index f2c6866fc88..1530a4111e6 100644 --- a/arch/frv/mm/mmu-context.c +++ b/arch/frv/mm/mmu-context.c @@ -54,9 +54,9 @@ static unsigned get_cxn(mm_context_t *ctx) /* find the first unallocated context number * - 0 is reserved for the kernel */ - cxn = find_next_zero_bit(&cxn_bitmap, NR_CXN, 1); + cxn = find_next_zero_bit(cxn_bitmap, NR_CXN, 1); if (cxn < NR_CXN) { - set_bit(cxn, &cxn_bitmap); + set_bit(cxn, cxn_bitmap); } else { /* none remaining - need to steal someone else's cxn */ @@ -138,7 +138,7 @@ void destroy_context(struct mm_struct *mm) cxn_pinned = -1; list_del_init(&ctx->id_link); - clear_bit(ctx->id, &cxn_bitmap); + clear_bit(ctx->id, cxn_bitmap); __flush_tlb_mm(ctx->id); ctx->id = 0; } -- cgit v1.2.3-18-g5258 From 0b28002fdf2d5b6ce3135a544c04940a16c5b0ba Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sun, 26 Mar 2006 01:38:58 -0800 Subject: [PATCH] more s/fucn/func/ typo fixes s/fucntion/function/ typo fixes Signed-off-by: Akinobu Mita Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/m68k/bvme6000/config.c | 2 +- arch/s390/crypto/crypt_s390_query.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/m68k/bvme6000/config.c b/arch/m68k/bvme6000/config.c index 3ffc84f9c29..c90cb5fcc8e 100644 --- a/arch/m68k/bvme6000/config.c +++ b/arch/m68k/bvme6000/config.c @@ -142,7 +142,7 @@ void __init config_bvme6000(void) /* Now do the PIT configuration */ pit->pgcr = 0x00; /* Unidirectional 8 bit, no handshake for now */ - pit->psrr = 0x18; /* PIACK and PIRQ fucntions enabled */ + pit->psrr = 0x18; /* PIACK and PIRQ functions enabled */ pit->pacr = 0x00; /* Sub Mode 00, H2 i/p, no DMA */ pit->padr = 0x00; /* Just to be tidy! */ pit->paddr = 0x00; /* All inputs for now (safest) */ diff --git a/arch/s390/crypto/crypt_s390_query.c b/arch/s390/crypto/crypt_s390_query.c index def02bdc44a..54fb11d7fad 100644 --- a/arch/s390/crypto/crypt_s390_query.c +++ b/arch/s390/crypto/crypt_s390_query.c @@ -55,7 +55,7 @@ static void query_available_functions(void) printk(KERN_INFO "KMC_AES_256: %d\n", crypt_s390_func_available(KMC_AES_256_ENCRYPT)); - /* query available KIMD fucntions */ + /* query available KIMD functions */ printk(KERN_INFO "KIMD_QUERY: %d\n", crypt_s390_func_available(KIMD_QUERY)); printk(KERN_INFO "KIMD_SHA_1: %d\n", -- cgit v1.2.3-18-g5258 From f214ef3e193dea10a7b527d4f4b0c15d2d98c984 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sun, 26 Mar 2006 01:38:59 -0800 Subject: [PATCH] um: fix undefined reference to hweight32 Build fix for user mode linux. Signed-off-by: Akinobu Mita Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/Kconfig.i386 | 5 +++++ arch/um/Kconfig.x86_64 | 5 +++++ 2 files changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/um/Kconfig.i386 b/arch/um/Kconfig.i386 index ef79ed25aec..85e6a55b3b5 100644 --- a/arch/um/Kconfig.i386 +++ b/arch/um/Kconfig.i386 @@ -52,3 +52,8 @@ config ARCH_HAS_SC_SIGNALS config ARCH_REUSE_HOST_VSYSCALL_AREA bool default y + +config GENERIC_HWEIGHT + bool + default y + diff --git a/arch/um/Kconfig.x86_64 b/arch/um/Kconfig.x86_64 index aae19bc4b06..f60e9e50642 100644 --- a/arch/um/Kconfig.x86_64 +++ b/arch/um/Kconfig.x86_64 @@ -46,3 +46,8 @@ config ARCH_REUSE_HOST_VSYSCALL_AREA config SMP_BROKEN bool default y + +config GENERIC_HWEIGHT + bool + default y + -- cgit v1.2.3-18-g5258 From 4b417d0c7cb6af4afb7bad6463f7f3227d8a5074 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sun, 26 Mar 2006 01:39:01 -0800 Subject: [PATCH] bitops: alpha: use config options instead of __alpha_fix__ and __alpha_cix__ Use config options instead of gcc builtin definition to tell the use of instruction set extensions (CIX and FIX). This is introduced to tell the kbuild system the use of opmized hweight*() routines on alpha architecture. Signed-off-by: Akinobu Mita Cc: Richard Henderson Cc: Ivan Kokshaysky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/alpha/lib/ev6-memchr.S | 2 +- arch/alpha/lib/fpreg.c | 8 ++++---- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/alpha/lib/ev6-memchr.S b/arch/alpha/lib/ev6-memchr.S index a8e843dbcc2..1a5f71b9d8b 100644 --- a/arch/alpha/lib/ev6-memchr.S +++ b/arch/alpha/lib/ev6-memchr.S @@ -84,7 +84,7 @@ $last_quad: beq $2, $not_found # U : U L U L $found_it: -#if defined(__alpha_fix__) && defined(__alpha_cix__) +#ifdef CONFIG_ALPHA_EV67 /* * Since we are guaranteed to have set one of the bits, we don't * have to worry about coming back with a 0x40 out of cttz... diff --git a/arch/alpha/lib/fpreg.c b/arch/alpha/lib/fpreg.c index 97c4d9d7a4d..05017ba34c3 100644 --- a/arch/alpha/lib/fpreg.c +++ b/arch/alpha/lib/fpreg.c @@ -4,7 +4,7 @@ * (C) Copyright 1998 Linus Torvalds */ -#if defined(__alpha_cix__) || defined(__alpha_fix__) +#if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67) #define STT(reg,val) asm volatile ("ftoit $f"#reg",%0" : "=r"(val)); #else #define STT(reg,val) asm volatile ("stt $f"#reg",%0" : "=m"(val)); @@ -53,7 +53,7 @@ alpha_read_fp_reg (unsigned long reg) return val; } -#if defined(__alpha_cix__) || defined(__alpha_fix__) +#if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67) #define LDT(reg,val) asm volatile ("itoft %0,$f"#reg : : "r"(val)); #else #define LDT(reg,val) asm volatile ("ldt $f"#reg",%0" : : "m"(val)); @@ -98,7 +98,7 @@ alpha_write_fp_reg (unsigned long reg, unsigned long val) } } -#if defined(__alpha_cix__) || defined(__alpha_fix__) +#if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67) #define STS(reg,val) asm volatile ("ftois $f"#reg",%0" : "=r"(val)); #else #define STS(reg,val) asm volatile ("sts $f"#reg",%0" : "=m"(val)); @@ -147,7 +147,7 @@ alpha_read_fp_reg_s (unsigned long reg) return val; } -#if defined(__alpha_cix__) || defined(__alpha_fix__) +#if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67) #define LDS(reg,val) asm volatile ("itofs %0,$f"#reg : : "r"(val)); #else #define LDS(reg,val) asm volatile ("lds $f"#reg",%0" : : "m"(val)); -- cgit v1.2.3-18-g5258 From 4668f0cd0abd41a908ec7aa292e91fd158e0c8f8 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sun, 26 Mar 2006 01:39:03 -0800 Subject: [PATCH] bitops: ia64: use cpu_set() instead of __set_bit() __set_bit() --> cpu_set() cleanup Signed-off-by: Akinobu Mita Cc: "Luck, Tony" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ia64/kernel/mca.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index 87ff7fe33cf..8963171788d 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -69,6 +69,7 @@ #include #include #include +#include #include #include @@ -1505,7 +1506,7 @@ format_mca_init_stack(void *mca_data, unsigned long offset, ti->cpu = cpu; p->thread_info = ti; p->state = TASK_UNINTERRUPTIBLE; - __set_bit(cpu, &p->cpus_allowed); + cpu_set(cpu, p->cpus_allowed); INIT_LIST_HEAD(&p->tasks); p->parent = p->real_parent = p->group_leader = p; INIT_LIST_HEAD(&p->children); -- cgit v1.2.3-18-g5258 From f7c29678739e69b8298496f926e87e5991e745e8 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sun, 26 Mar 2006 01:39:18 -0800 Subject: [PATCH] bitops: alpha: use generic bitops - unless defined(__alpha_cix__) and defined(__alpha_fix__) - remove generic_fls() - remove generic_hweight{64,32,16,8}() - remove generic_fls64() - remove find_{next,first}{,_zero}_bit() - remove ext2_{set,clear,test,find_first_zero,find_next_zero}_bit() - remove minix_{test,set,test_and_clear,test,find_first_zero}_bit() Signed-off-by: Akinobu Mita Cc: Richard Henderson Cc: Ivan Kokshaysky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/alpha/Kconfig | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index eedf41bf705..9bef61b3036 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -25,6 +25,10 @@ config RWSEM_XCHGADD_ALGORITHM bool default y +config GENERIC_FIND_NEXT_BIT + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y @@ -447,6 +451,10 @@ config ALPHA_IRONGATE depends on ALPHA_NAUTILUS default y +config GENERIC_HWEIGHT + bool + default y if !ALPHA_EV6 && !ALPHA_EV67 + config ALPHA_AVANTI bool depends on ALPHA_XL || ALPHA_AVANTI_CH -- cgit v1.2.3-18-g5258 From b89c3b165fbec605c60fd5a9e32d647e4c0befbb Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sun, 26 Mar 2006 01:39:19 -0800 Subject: [PATCH] bitops: arm: use generic bitops - remove __{,test_and_}{set,clear,change}_bit() and test_bit() - if __LINUX_ARM_ARCH__ < 5 - remove ffz() - remove __ffs() - remove generic_fls() - remove generic_ffs() - remove generic_fls64() - remove sched_find_first_bit() - remove generic_hweight{32,16,8}() Signed-off-by: Akinobu Mita Cc: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/arm/Kconfig | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 0dd24ebdf6a..bf2e72698d0 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -53,6 +53,10 @@ config RWSEM_GENERIC_SPINLOCK config RWSEM_XCHGADD_ALGORITHM bool +config GENERIC_HWEIGHT + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y -- cgit v1.2.3-18-g5258 From d142d8601993f423386556f1cbbacbdcf7b7a767 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sun, 26 Mar 2006 01:39:20 -0800 Subject: [PATCH] bitops: arm26: use generic bitops - remove __{,test_and_}{set,clear,change}_bit() and test_bit() - remove ffz() - remove __ffs() - remove generic_fls() - remove generic_fls64() - remove generic_ffs() - remove sched_find_first_bit() - remove generic_hweight{32,16,8}() Signed-off-by: Akinobu Mita Cc: Ian Molton Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/arm26/Kconfig | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm26/Kconfig b/arch/arm26/Kconfig index dee23d87fc5..cf4ebf4c274 100644 --- a/arch/arm26/Kconfig +++ b/arch/arm26/Kconfig @@ -41,6 +41,10 @@ config RWSEM_GENERIC_SPINLOCK config RWSEM_XCHGADD_ALGORITHM bool +config GENERIC_HWEIGHT + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y -- cgit v1.2.3-18-g5258 From e9f26df17266a8bd327957bd1a5957a263bd7112 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sun, 26 Mar 2006 01:39:21 -0800 Subject: [PATCH] bitops: cris: use generic bitops - remove __{,test_and_}{set,clear,change}_bit() and test_bit() - remove generic_fls() - remove generic_fls64() - remove generic_hweight{32,16,8}() - remove find_{next,first}{,_zero}_bit() - remove ext2_{set,clear,test,find_first_zero,find_next_zero}_bit() - remove minix_{test,set,test_and_clear,test,find_first_zero}_bit() - remove sched_find_first_bit() Signed-off-by: Akinobu Mita Acked-by: Mikael Starvik Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/cris/Kconfig | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig index b8326194973..856b665020e 100644 --- a/arch/cris/Kconfig +++ b/arch/cris/Kconfig @@ -16,6 +16,14 @@ config RWSEM_GENERIC_SPINLOCK config RWSEM_XCHGADD_ALGORITHM bool +config GENERIC_FIND_NEXT_BIT + bool + default y + +config GENERIC_HWEIGHT + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y -- cgit v1.2.3-18-g5258 From 1f6d7a93c141a473e2cff428a3dbf13b4bec9325 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sun, 26 Mar 2006 01:39:22 -0800 Subject: [PATCH] bitops: frv: use generic bitops - remove ffz() - remove find_{next,first}{,_zero}_bit() - remove generic_ffs() - remove __ffs() - remove generic_fls64() - remove sched_find_first_bit() - remove generic_hweight{32,16,8}() - remove ext2_{set,clear,test,find_first_zero,find_next_zero}_bit() - remove minix_{test,set,test_and_clear,test,find_first_zero}_bit() Signed-off-by: Akinobu Mita Cc: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/frv/Kconfig | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig index e0838371237..95a3892b8d1 100644 --- a/arch/frv/Kconfig +++ b/arch/frv/Kconfig @@ -17,6 +17,10 @@ config GENERIC_FIND_NEXT_BIT bool default y +config GENERIC_HWEIGHT + bool + default y + config GENERIC_CALIBRATE_DELAY bool default n -- cgit v1.2.3-18-g5258 From f6e0213f7c253086e17844df8ba21075100b5ead Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sun, 26 Mar 2006 01:39:23 -0800 Subject: [PATCH] bitops: h8300: use generic bitops - remove generic_ffs() - remove find_{next,first}{,_zero}_bit() - remove sched_find_first_bit() - remove generic_hweight{32,16,8}() - remove ext2_{set,clear,test,find_first_zero,find_next_zero}_bit() - remove ext2_{set,clear}_bit_atomic() - remove minix_{test,set,test_and_clear,test,find_first_zero}_bit() - remove generic_fls() - remove generic_fls64() Signed-off-by: Akinobu Mita Cc: Yoshinori Sato Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/h8300/Kconfig | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig index 98308b018a3..cabf0bfffc5 100644 --- a/arch/h8300/Kconfig +++ b/arch/h8300/Kconfig @@ -29,6 +29,14 @@ config RWSEM_XCHGADD_ALGORITHM bool default n +config GENERIC_FIND_NEXT_BIT + bool + default y + +config GENERIC_HWEIGHT + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y -- cgit v1.2.3-18-g5258 From 1cc2b9943b7b3a8d526aa8be5450d3ec083c3de4 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sun, 26 Mar 2006 01:39:24 -0800 Subject: [PATCH] bitops: i386: use generic bitops - remove generic_fls64() - remove sched_find_first_bit() - remove generic_hweight{32,16,8}() - remove ext2_{set,clear,test,find_first_zero,find_next_zero}_bit() - remove minix_{test,set,test_and_clear,test,find_first_zero}_bit() Signed-off-by: Akinobu Mita Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/Kconfig | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index b008fb0cd7b..f7db71d0b91 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -37,6 +37,10 @@ config GENERIC_IOMAP bool default y +config GENERIC_HWEIGHT + bool + default y + config ARCH_MAY_HAVE_PC_FDC bool default y -- cgit v1.2.3-18-g5258 From 2875aef8bd0e42367a66a78ef7abe10f3bba27b5 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sun, 26 Mar 2006 01:39:25 -0800 Subject: [PATCH] bitops: ia64: use generic bitops - remove generic_fls64() - remove find_{next,first}{,_zero}_bit() - remove ext2_{set,clear,test,find_first_zero,find_next_zero}_bit() - remove minix_{test,set,test_and_clear,test,find_first_zero}_bit() - remove sched_find_first_bit() Signed-off-by: Akinobu Mita Cc: "Luck, Tony" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ia64/Kconfig | 4 +++ arch/ia64/lib/Makefile | 2 +- arch/ia64/lib/bitop.c | 88 -------------------------------------------------- 3 files changed, 5 insertions(+), 89 deletions(-) delete mode 100644 arch/ia64/lib/bitop.c (limited to 'arch') diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index d790a6d9026..edffe25a477 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -34,6 +34,10 @@ config RWSEM_XCHGADD_ALGORITHM bool default y +config GENERIC_FIND_NEXT_BIT + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y diff --git a/arch/ia64/lib/Makefile b/arch/ia64/lib/Makefile index ac64664a180..d8536a2c22a 100644 --- a/arch/ia64/lib/Makefile +++ b/arch/ia64/lib/Makefile @@ -6,7 +6,7 @@ obj-y := io.o lib-y := __divsi3.o __udivsi3.o __modsi3.o __umodsi3.o \ __divdi3.o __udivdi3.o __moddi3.o __umoddi3.o \ - bitop.o checksum.o clear_page.o csum_partial_copy.o \ + checksum.o clear_page.o csum_partial_copy.o \ clear_user.o strncpy_from_user.o strlen_user.o strnlen_user.o \ flush.o ip_fast_csum.o do_csum.o \ memset.o strlen.o diff --git a/arch/ia64/lib/bitop.c b/arch/ia64/lib/bitop.c deleted file mode 100644 index 82e299c8464..00000000000 --- a/arch/ia64/lib/bitop.c +++ /dev/null @@ -1,88 +0,0 @@ -#include -#include -#include -#include -#include - -/* - * Find next zero bit in a bitmap reasonably efficiently.. - */ - -int __find_next_zero_bit (const void *addr, unsigned long size, unsigned long offset) -{ - unsigned long *p = ((unsigned long *) addr) + (offset >> 6); - unsigned long result = offset & ~63UL; - unsigned long tmp; - - if (offset >= size) - return size; - size -= result; - offset &= 63UL; - if (offset) { - tmp = *(p++); - tmp |= ~0UL >> (64-offset); - if (size < 64) - goto found_first; - if (~tmp) - goto found_middle; - size -= 64; - result += 64; - } - while (size & ~63UL) { - if (~(tmp = *(p++))) - goto found_middle; - result += 64; - size -= 64; - } - if (!size) - return result; - tmp = *p; -found_first: - tmp |= ~0UL << size; - if (tmp == ~0UL) /* any bits zero? */ - return result + size; /* nope */ -found_middle: - return result + ffz(tmp); -} -EXPORT_SYMBOL(__find_next_zero_bit); - -/* - * Find next bit in a bitmap reasonably efficiently.. - */ -int __find_next_bit(const void *addr, unsigned long size, unsigned long offset) -{ - unsigned long *p = ((unsigned long *) addr) + (offset >> 6); - unsigned long result = offset & ~63UL; - unsigned long tmp; - - if (offset >= size) - return size; - size -= result; - offset &= 63UL; - if (offset) { - tmp = *(p++); - tmp &= ~0UL << offset; - if (size < 64) - goto found_first; - if (tmp) - goto found_middle; - size -= 64; - result += 64; - } - while (size & ~63UL) { - if ((tmp = *(p++))) - goto found_middle; - result += 64; - size -= 64; - } - if (!size) - return result; - tmp = *p; - found_first: - tmp &= ~0UL >> (64-size); - if (tmp == 0UL) /* Are any bits set? */ - return result + size; /* Nope. */ - found_middle: - return result + __ffs(tmp); -} -EXPORT_SYMBOL(__find_next_bit); -- cgit v1.2.3-18-g5258 From 6d9f937b559d664b6f222cb91eca9c6802bfe89a Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sun, 26 Mar 2006 01:39:26 -0800 Subject: [PATCH] bitops: m32r: use generic bitops - remove __{,test_and_}{set,clear,change}_bit() and test_bit() - remove ffz() - remove find_{next,first}{,_zero}_bit() - remove __ffs() - remove generic_fls() - remove generic_fls64() - remove sched_find_first_bit() - remove generic_ffs() - remove generic_hweight{32,16,8}() - remove ext2_{set,clear,test,find_first_zero,find_next_zero}_bit() - remove ext2_{set,clear}_bit_atomic() - remove minix_{test,set,test_and_clear,test,find_first_zero}_bit() Signed-off-by: Akinobu Mita Cc: Hirokazu Takata Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/m32r/Kconfig | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig index a3dcc3fab4b..05c864c6c2d 100644 --- a/arch/m32r/Kconfig +++ b/arch/m32r/Kconfig @@ -214,6 +214,14 @@ config RWSEM_XCHGADD_ALGORITHM bool default n +config GENERIC_FIND_NEXT_BIT + bool + default y + +config GENERIC_HWEIGHT + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y -- cgit v1.2.3-18-g5258 From ba1a5b32ba5e2fcb53b6943b8c9c33694ac68ce5 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sun, 26 Mar 2006 01:39:27 -0800 Subject: [PATCH] bitops: m68k: use generic bitops - remove generic_fls64() - remove sched_find_first_bit() - remove generic_hweight() - remove ext2_{set,clear,test,find_first_zero,find_next_zero}_bit() Signed-off-by: Akinobu Mita Cc: Roman Zippel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/m68k/Kconfig | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 8849439e88d..805b81fedf8 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -17,6 +17,10 @@ config RWSEM_GENERIC_SPINLOCK config RWSEM_XCHGADD_ALGORITHM bool +config GENERIC_HWEIGHT + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y -- cgit v1.2.3-18-g5258 From 4c5aea053d64bee7a776a4b874e1b417e9f316fe Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sun, 26 Mar 2006 01:39:28 -0800 Subject: [PATCH] ppc: fix undefined reference to hweight32 Build fix for ppc Signed-off-by: Akinobu Mita Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/Kconfig | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index 54a0a9bb12d..3a3e302b4ea 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -19,6 +19,10 @@ config RWSEM_XCHGADD_ALGORITHM bool default y +config GENERIC_HWEIGHT + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y -- cgit v1.2.3-18-g5258 From d2d7cdcf6e6d2a3db9885316d075940f12324413 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sun, 26 Mar 2006 01:39:29 -0800 Subject: [PATCH] bitops: m68knommu: use generic bitops - remove ffs() - remove __ffs() - remove sched_find_first_bit() - remove ffz() - remove find_{next,first}{,_zero}_bit() - remove generic_hweight() - remove minix_{test,set,test_and_clear,test,find_first_zero}_bit() - remove generic_fls() - remove generic_fls64() Signed-off-by: Akinobu Mita Cc: Greg Ungerer Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/m68knommu/Kconfig | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig index e50858dbc23..3cde6822ead 100644 --- a/arch/m68knommu/Kconfig +++ b/arch/m68knommu/Kconfig @@ -25,6 +25,14 @@ config RWSEM_XCHGADD_ALGORITHM bool default n +config GENERIC_FIND_NEXT_BIT + bool + default y + +config GENERIC_HWEIGHT + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y -- cgit v1.2.3-18-g5258 From 3c9ee7ef87414cba80dbdf433d3547bb20055ef7 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sun, 26 Mar 2006 01:39:30 -0800 Subject: [PATCH] bitops: mips: use generic bitops - remove __{,test_and_}{set,clear,change}_bit() and test_bit() - unless defined(CONFIG_CPU_MIPS32) or defined(CONFIG_CPU_MIPS64) - remove __ffs() - remove ffs() - remove ffz() - remove fls() - remove fls64() - remove find_{next,first}{,_zero}_bit() - remove sched_find_first_bit() - remove generic_hweight64() - remove generic_hweight{32,16,8}() - remove ext2_{set,clear,test,find_first_zero,find_next_zero}_bit() - remove ext2_{set,clear}_bit_atomic() - remove minix_{test,set,test_and_clear,test,find_first_zero}_bit() Signed-off-by: Akinobu Mita Cc: Ralf Baechle Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/mips/Kconfig | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index ac2012f033d..5080ea1799a 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -801,6 +801,14 @@ config RWSEM_GENERIC_SPINLOCK config RWSEM_XCHGADD_ALGORITHM bool +config GENERIC_FIND_NEXT_BIT + bool + default y + +config GENERIC_HWEIGHT + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y -- cgit v1.2.3-18-g5258 From 59e18a2e1c8f6642c307032939daaf474c16344e Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sun, 26 Mar 2006 01:39:31 -0800 Subject: [PATCH] bitops: parisc: use generic bitops - remove __{,test_and_}{set,clear,change}_bit() and test_bit() - remove ffz() - remove generic_fls64() - remove generic_hweight{32,16,8}() - remove generic_hweight64() - remove sched_find_first_bit() - remove find_{next,first}{,_zero}_bit() - remove ext2_{set,clear,test,find_first_zero,find_next_zero}_bit() Signed-off-by: Akinobu Mita Cc: Kyle McMartin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/parisc/Kconfig | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index eca33cfa8a4..6b3c50964ca 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -25,6 +25,14 @@ config RWSEM_GENERIC_SPINLOCK config RWSEM_XCHGADD_ALGORITHM bool +config GENERIC_FIND_NEXT_BIT + bool + default y + +config GENERIC_HWEIGHT + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y -- cgit v1.2.3-18-g5258 From e779b2f95f3786cd9cfc804cd6f04f7267d75541 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sun, 26 Mar 2006 01:39:33 -0800 Subject: [PATCH] bitops: powerpc: use generic bitops - remove __{,test_and_}{set,clear,change}_bit() and test_bit() - remove generic_fls64() - remove generic_hweight{64,32,16,8}() - remove sched_find_first_bit() Signed-off-by: Akinobu Mita Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/Kconfig | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index fae42da7468..a433b7126d3 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -37,6 +37,10 @@ config RWSEM_XCHGADD_ALGORITHM bool default y +config GENERIC_HWEIGHT + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y -- cgit v1.2.3-18-g5258 From 7e33db4e2e9d67ee01d105e33fb773eed8ba10f0 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sun, 26 Mar 2006 01:39:34 -0800 Subject: [PATCH] bitops: s390: use generic bitops - remove generic_ffs() - remove generic_fls() - remove generic_fls64() - remove generic_hweight{64,32,16,8}() - remove minix_{test,set,test_and_clear,test,find_first_zero}_bit() Signed-off-by: Akinobu Mita Cc: Heiko Carstens Cc: Martin Schwidefsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/s390/Kconfig | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 2b7364ed23b..01c5c082f97 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -14,6 +14,10 @@ config RWSEM_XCHGADD_ALGORITHM bool default y +config GENERIC_HWEIGHT + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y -- cgit v1.2.3-18-g5258 From e2268c7129e6cab53a5dac1ab0790a547555e21a Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sun, 26 Mar 2006 01:39:35 -0800 Subject: [PATCH] bitops: sh: use generic bitops - remove __{,test_and_}{set,clear,change}_bit() and test_bit() - remove find_{next,first}{,_zero}_bit() - remove generic_ffs() - remove generic_hweight{32,16,8}() - remove sched_find_first_bit() - remove ext2_{set,clear,test,find_first_zero,find_next_zero}_bit() - remove ext2_{set,clear}_bit_atomic() - remove minix_{test,set,test_and_clear,test,find_first_zero}_bit() - remove generic_fls() - remove generic_fls64() Signed-off-by: Akinobu Mita Cc: Paul Mundt Cc: Kazumoto Kojima Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/sh/Kconfig | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index e9b275d9073..58583f45947 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -21,6 +21,14 @@ config RWSEM_GENERIC_SPINLOCK config RWSEM_XCHGADD_ALGORITHM bool +config GENERIC_FIND_NEXT_BIT + bool + default y + +config GENERIC_HWEIGHT + bool + default y + config GENERIC_HARDIRQS bool default y -- cgit v1.2.3-18-g5258 From 62f1b2465bdf77bb95037a5418040edb2af142d0 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sun, 26 Mar 2006 01:39:37 -0800 Subject: [PATCH] bitops: sh64: use generic bitops - remove __{,test_and_}{set,clear,change}_bit() and test_bit() - remove __ffs() - remove find_{next,first}{,_zero}_bit() - remove generic_hweight{32,16,8}() - remove sched_find_first_bit() - remove generic_ffs() - remove ext2_{set,clear,test,find_first_zero,find_next_zero}_bit() - remove ext2_{set,clear}_bit_atomic() - remove minix_{test,set,test_and_clear,test,find_first_zero}_bit() - remove generic_fls() - remove generic_fls64() Signed-off-by: Akinobu Mita Cc: Paul Mundt Cc: Richard Curnow Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/sh64/Kconfig | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/sh64/Kconfig b/arch/sh64/Kconfig index 07b172deb87..58c678e0666 100644 --- a/arch/sh64/Kconfig +++ b/arch/sh64/Kconfig @@ -21,6 +21,14 @@ config RWSEM_GENERIC_SPINLOCK bool default y +config GENERIC_FIND_NEXT_BIT + bool + default y + +config GENERIC_HWEIGHT + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y -- cgit v1.2.3-18-g5258 From d59288b75797fd982546aee7ba24a495dee128dd Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sun, 26 Mar 2006 01:39:39 -0800 Subject: [PATCH] bitops: sparc: use generic bitops - remove __{,test_and_}{set,clear,change}_bit() and test_bit() - remove ffz() - remove __ffs() - remove sched_find_first_bit() - remove ffs() - remove generic_fls() - remove generic_fls64() - remove generic_hweight{32,16,8}() - remove find_{next,first}{,_zero}_bit() - remove ext2_{set,clear,test,find_first_zero,find_next_zero}_bit() - remove ext2_{set,clear}_bit_atomic() - remove minix_{test,set,test_and_clear,test,find_first_zero}_bit() Signed-off-by: Akinobu Mita Cc: William Lee Irwin III Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/sparc/Kconfig | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 7c58fc1a39c..9431e967aa4 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -150,6 +150,14 @@ config RWSEM_GENERIC_SPINLOCK config RWSEM_XCHGADD_ALGORITHM bool +config GENERIC_FIND_NEXT_BIT + bool + default y + +config GENERIC_HWEIGHT + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y -- cgit v1.2.3-18-g5258 From 2d78d4beb64eb07d50665432867971c481192ebf Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sun, 26 Mar 2006 01:39:40 -0800 Subject: [PATCH] bitops: sparc64: use generic bitops - remove __{,test_and_}{set,clear,change}_bit() and test_bit() - remove ffz() - remove __ffs() - remove generic_fls() - remove generic_fls64() - remove sched_find_first_bit() - remove ffs() - unless defined(ULTRA_HAS_POPULATION_COUNT) - remove generic_hweight{64,32,16,8}() - remove find_{next,first}{,_zero}_bit() - remove ext2_{set,clear,test,find_first_zero,find_next_zero}_bit() - remove minix_{test,set,test_and_clear,test,find_first_zero}_bit() Signed-off-by: Akinobu Mita Cc: "David S. Miller" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/sparc64/Kconfig | 8 +++ arch/sparc64/kernel/sparc64_ksyms.c | 5 -- arch/sparc64/lib/Makefile | 2 +- arch/sparc64/lib/find_bit.c | 127 ------------------------------------ 4 files changed, 9 insertions(+), 133 deletions(-) delete mode 100644 arch/sparc64/lib/find_bit.c (limited to 'arch') diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig index 267afddf63c..d1e2fc56648 100644 --- a/arch/sparc64/Kconfig +++ b/arch/sparc64/Kconfig @@ -162,6 +162,14 @@ config RWSEM_XCHGADD_ALGORITHM bool default y +config GENERIC_FIND_NEXT_BIT + bool + default y + +config GENERIC_HWEIGHT + bool + default y if !ULTRA_HAS_POPULATION_COUNT + config GENERIC_CALIBRATE_DELAY bool default y diff --git a/arch/sparc64/kernel/sparc64_ksyms.c b/arch/sparc64/kernel/sparc64_ksyms.c index 9914a17651b..c7fbbcfce82 100644 --- a/arch/sparc64/kernel/sparc64_ksyms.c +++ b/arch/sparc64/kernel/sparc64_ksyms.c @@ -175,11 +175,6 @@ EXPORT_SYMBOL(set_bit); EXPORT_SYMBOL(clear_bit); EXPORT_SYMBOL(change_bit); -/* Bit searching */ -EXPORT_SYMBOL(find_next_bit); -EXPORT_SYMBOL(find_next_zero_bit); -EXPORT_SYMBOL(find_next_zero_le_bit); - EXPORT_SYMBOL(ivector_table); EXPORT_SYMBOL(enable_irq); EXPORT_SYMBOL(disable_irq); diff --git a/arch/sparc64/lib/Makefile b/arch/sparc64/lib/Makefile index 8812ded19f0..4a725d8985f 100644 --- a/arch/sparc64/lib/Makefile +++ b/arch/sparc64/lib/Makefile @@ -14,6 +14,6 @@ lib-y := PeeCeeI.o copy_page.o clear_page.o strlen.o strncmp.o \ NGmemcpy.o NGcopy_from_user.o NGcopy_to_user.o NGpatch.o \ NGpage.o NGbzero.o \ copy_in_user.o user_fixup.o memmove.o \ - mcount.o ipcsum.o rwsem.o xor.o find_bit.o delay.o + mcount.o ipcsum.o rwsem.o xor.o delay.o obj-y += iomap.o diff --git a/arch/sparc64/lib/find_bit.c b/arch/sparc64/lib/find_bit.c deleted file mode 100644 index 6059557067b..00000000000 --- a/arch/sparc64/lib/find_bit.c +++ /dev/null @@ -1,127 +0,0 @@ -#include - -/** - * find_next_bit - find the next set bit in a memory region - * @addr: The address to base the search on - * @offset: The bitnumber to start searching at - * @size: The maximum size to search - */ -unsigned long find_next_bit(const unsigned long *addr, unsigned long size, - unsigned long offset) -{ - const unsigned long *p = addr + (offset >> 6); - unsigned long result = offset & ~63UL; - unsigned long tmp; - - if (offset >= size) - return size; - size -= result; - offset &= 63UL; - if (offset) { - tmp = *(p++); - tmp &= (~0UL << offset); - if (size < 64) - goto found_first; - if (tmp) - goto found_middle; - size -= 64; - result += 64; - } - while (size & ~63UL) { - if ((tmp = *(p++))) - goto found_middle; - result += 64; - size -= 64; - } - if (!size) - return result; - tmp = *p; - -found_first: - tmp &= (~0UL >> (64 - size)); - if (tmp == 0UL) /* Are any bits set? */ - return result + size; /* Nope. */ -found_middle: - return result + __ffs(tmp); -} - -/* find_next_zero_bit() finds the first zero bit in a bit string of length - * 'size' bits, starting the search at bit 'offset'. This is largely based - * on Linus's ALPHA routines, which are pretty portable BTW. - */ - -unsigned long find_next_zero_bit(const unsigned long *addr, - unsigned long size, unsigned long offset) -{ - const unsigned long *p = addr + (offset >> 6); - unsigned long result = offset & ~63UL; - unsigned long tmp; - - if (offset >= size) - return size; - size -= result; - offset &= 63UL; - if (offset) { - tmp = *(p++); - tmp |= ~0UL >> (64-offset); - if (size < 64) - goto found_first; - if (~tmp) - goto found_middle; - size -= 64; - result += 64; - } - while (size & ~63UL) { - if (~(tmp = *(p++))) - goto found_middle; - result += 64; - size -= 64; - } - if (!size) - return result; - tmp = *p; - -found_first: - tmp |= ~0UL << size; - if (tmp == ~0UL) /* Are any bits zero? */ - return result + size; /* Nope. */ -found_middle: - return result + ffz(tmp); -} - -unsigned long find_next_zero_le_bit(unsigned long *addr, unsigned long size, unsigned long offset) -{ - unsigned long *p = addr + (offset >> 6); - unsigned long result = offset & ~63UL; - unsigned long tmp; - - if (offset >= size) - return size; - size -= result; - offset &= 63UL; - if(offset) { - tmp = __swab64p(p++); - tmp |= (~0UL >> (64-offset)); - if(size < 64) - goto found_first; - if(~tmp) - goto found_middle; - size -= 64; - result += 64; - } - while(size & ~63) { - if(~(tmp = __swab64p(p++))) - goto found_middle; - result += 64; - size -= 64; - } - if(!size) - return result; - tmp = __swab64p(p); -found_first: - tmp |= (~0UL << size); - if (tmp == ~0UL) /* Are any bits zero? */ - return result + size; /* Nope. */ -found_middle: - return result + ffz(tmp); -} -- cgit v1.2.3-18-g5258 From a58259cddf9f824af27abf8960ed604bee53f7c1 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sun, 26 Mar 2006 01:39:41 -0800 Subject: [PATCH] bitops: v850: use generic bitops - remove ffz() - remove find_{next,first}{,_zero}_bit() - remove generic_ffs() - remove generic_fls() - remove generic_fls64() - remove __ffs() - remove sched_find_first_bit() - remove generic_hweight{32,16,8}() - remove ext2_{set,clear,test,find_first_zero,find_next_zero}_bit() - remove minix_{test,set,test_and_clear,test,find_first_zero}_bit() Signed-off-by: Akinobu Mita Cc: Miles Bader Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/v850/Kconfig | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/v850/Kconfig b/arch/v850/Kconfig index e7fc3e50034..37ec644603a 100644 --- a/arch/v850/Kconfig +++ b/arch/v850/Kconfig @@ -16,6 +16,12 @@ config RWSEM_GENERIC_SPINLOCK config RWSEM_XCHGADD_ALGORITHM bool default n +config GENERIC_FIND_NEXT_BIT + bool + default y +config GENERIC_HWEIGHT + bool + default y config GENERIC_CALIBRATE_DELAY bool default y -- cgit v1.2.3-18-g5258 From f33e2fbacce8008984db99c45120db31081577c5 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sun, 26 Mar 2006 01:39:42 -0800 Subject: [PATCH] bitops: x86_64: use generic bitops - remove sched_find_first_bit() - remove generic_hweight{64,32,16,8}() - remove ext2_{set,clear,test,find_first_zero,find_next_zero}_bit() - remove minix_{test,set,test_and_clear,test,find_first_zero}_bit() Signed-off-by: Akinobu Mita Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86_64/Kconfig | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index 6420baeb8c1..45efe0ca88f 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -45,6 +45,10 @@ config RWSEM_GENERIC_SPINLOCK config RWSEM_XCHGADD_ALGORITHM bool +config GENERIC_HWEIGHT + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y -- cgit v1.2.3-18-g5258 From d4337aa5281a7357666f713339211fcd278f4e7a Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sun, 26 Mar 2006 01:39:43 -0800 Subject: [PATCH] bitops: xtensa: use generic bitops - remove {,test_and_}{set,clear,change}_bit() - remove __{,test_and_}{set,clear,change}_bit() and test_bit() - remove generic_fls64() - remove find_{next,first}{,_zero}_bit() - remove ext2_{set,clear,test,find_first_zero,find_next_zero}_bit() - remove generic_hweight{32,16,8}() - remove sched_find_first_bit() - remove minix_{test,set,test_and_clear,test,find_first_zero}_bit() Signed-off-by: Akinobu Mita Cc: Chris Zankel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/xtensa/Kconfig | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index e90ef5db891..dbeb3504c3c 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -22,6 +22,14 @@ config RWSEM_XCHGADD_ALGORITHM bool default y +config GENERIC_FIND_NEXT_BIT + bool + default y + +config GENERIC_HWEIGHT + bool + default y + config GENERIC_HARDIRQS bool default y -- cgit v1.2.3-18-g5258 From 55b0f8a68ab475cc68f88d1e7a873490869d022e Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sun, 26 Mar 2006 01:39:53 -0800 Subject: [PATCH] bitops: ia64: make partial_page.bitmap an unsigned long The find_*_bit() routines are defined to work on a pointer to unsigned long. But partial_page.bitmap is unsigned int and it is passed to find_*_bit() in arch/ia64/ia32/sys_ia32.c. So the compiler will print warnings. This patch changes to unsigned long instead. Signed-off-by: Akinobu Mita Cc: "Luck, Tony" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ia64/ia32/ia32priv.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/ia64/ia32/ia32priv.h b/arch/ia64/ia32/ia32priv.h index 68ceb4e690c..ccb98ed48e5 100644 --- a/arch/ia64/ia32/ia32priv.h +++ b/arch/ia64/ia32/ia32priv.h @@ -29,9 +29,9 @@ struct partial_page { struct partial_page *next; /* linked list, sorted by address */ struct rb_node pp_rb; - /* 64K is the largest "normal" page supported by ia64 ABI. So 4K*32 + /* 64K is the largest "normal" page supported by ia64 ABI. So 4K*64 * should suffice.*/ - unsigned int bitmap; + unsigned long bitmap; unsigned int base; }; -- cgit v1.2.3-18-g5258 From 335bd9dff31d042b773591933d3ee5bd62d5ea27 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sun, 26 Mar 2006 21:25:57 +0100 Subject: [SERIAL] Remove obsoleted au1x00_uart driver As announced in feature-removal-schedule.txt. Signed-off-by: Ralf Baechle Signed-off-by: Russell King --- arch/mips/au1000/common/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c index 1080558c810..307e98c29dd 100644 --- a/arch/mips/au1000/common/setup.c +++ b/arch/mips/au1000/common/setup.c @@ -94,7 +94,7 @@ void __init plat_setup(void) argptr = prom_getcmdline(); -#if defined(CONFIG_SERIAL_AU1X00_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE) +#ifdef CONFIG_SERIAL_8250_CONSOLE if ((argptr = strstr(argptr, "console=")) == NULL) { argptr = prom_getcmdline(); strcat(argptr, " console=ttyS0,115200"); -- cgit v1.2.3-18-g5258 From bd8f103efef14980decf5d54a2de85835e9a6d9a Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Sun, 26 Mar 2006 21:40:27 +0100 Subject: [ARM] 3415/1: Akita: Add missing EXPORT_SYMBOL Patch from Richard Purdie Add an EXPORT_SYMBOL for the Akita IO Expander Device. Signed-off-by: Richard Purdie Signed-off-by: Russell King --- arch/arm/mach-pxa/spitz.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 30ec317bbb9..0dbb079ecd2 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -467,6 +467,8 @@ struct platform_device akitaioexp_device = { .id = -1, }; +EXPORT_SYMBOL_GPL(akitaioexp_device); + static void __init akita_init(void) { spitz_ficp_platform_data.transceiver_mode = akita_irda_transceiver_mode; -- cgit v1.2.3-18-g5258 From fbb18a277a6f192404aa20ece49529acb1e1e76d Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 26 Mar 2006 23:13:39 +0100 Subject: [SERIAL] amba-pl010: allow platforms to specify modem control method The amba-pl010 hardware does not provide RTS and DTR control lines; it is expected that these will be implemented using GPIO. Allow platforms to supply a function to implement manipulation of modem control lines. Signed-off-by: Russell King --- arch/arm/mach-integrator/core.c | 46 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index 20071a2767c..576a5e979c0 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -15,7 +15,9 @@ #include #include #include +#include #include +#include #include #include @@ -28,6 +30,8 @@ #include "common.h" +static struct amba_pl010_data integrator_uart_data; + static struct amba_device rtc_device = { .dev = { .bus_id = "mb:15", @@ -44,6 +48,7 @@ static struct amba_device rtc_device = { static struct amba_device uart0_device = { .dev = { .bus_id = "mb:16", + .platform_data = &integrator_uart_data, }, .res = { .start = INTEGRATOR_UART0_BASE, @@ -57,6 +62,7 @@ static struct amba_device uart0_device = { static struct amba_device uart1_device = { .dev = { .bus_id = "mb:17", + .platform_data = &integrator_uart_data, }, .res = { .start = INTEGRATOR_UART1_BASE, @@ -115,6 +121,46 @@ static int __init integrator_init(void) arch_initcall(integrator_init); +/* + * On the Integrator platform, the port RTS and DTR are provided by + * bits in the following SC_CTRLS register bits: + * RTS DTR + * UART0 7 6 + * UART1 5 4 + */ +#define SC_CTRLC (IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_CTRLC_OFFSET) +#define SC_CTRLS (IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_CTRLS_OFFSET) + +static void integrator_uart_set_mctrl(struct amba_device *dev, void __iomem *base, unsigned int mctrl) +{ + unsigned int ctrls = 0, ctrlc = 0, rts_mask, dtr_mask; + + if (dev == &uart0_device) { + rts_mask = 1 << 4; + dtr_mask = 1 << 5; + } else { + rts_mask = 1 << 6; + dtr_mask = 1 << 7; + } + + if (mctrl & TIOCM_RTS) + ctrlc |= rts_mask; + else + ctrls |= rts_mask; + + if (mctrl & TIOCM_DTR) + ctrlc |= dtr_mask; + else + ctrls |= dtr_mask; + + __raw_writel(ctrls, SC_CTRLS); + __raw_writel(ctrlc, SC_CTRLC); +} + +static struct amba_pl010_data integrator_uart_data = { + .set_mctrl = integrator_uart_set_mctrl, +}; + #define CM_CTRL IO_ADDRESS(INTEGRATOR_HDR_BASE) + INTEGRATOR_HDR_CTRL_OFFSET static DEFINE_SPINLOCK(cm_lock); -- cgit v1.2.3-18-g5258 From aee85fe8e8143d3f54d9e6d3c6cdd40ead563267 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sun, 26 Mar 2006 23:16:39 +0100 Subject: [SERIAL] Provide Cirrus EP93xx AMBA PL010 serial support. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- arch/arm/mach-ep93xx/core.c | 68 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 68 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 865427bfad7..2d892e4daa0 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -30,7 +30,9 @@ #include #include #include +#include #include +#include #include #include @@ -360,6 +362,68 @@ void __init ep93xx_init_irq(void) /************************************************************************* * EP93xx peripheral handling *************************************************************************/ +#define EP93XX_UART_MCR_OFFSET (0x0100) + +static void ep93xx_uart_set_mctrl(struct amba_device *dev, + void __iomem *base, unsigned int mctrl) +{ + unsigned int mcr; + + mcr = 0; + if (!(mctrl & TIOCM_RTS)) + mcr |= 2; + if (!(mctrl & TIOCM_DTR)) + mcr |= 1; + + __raw_writel(mcr, base + EP93XX_UART_MCR_OFFSET); +} + +static struct amba_pl010_data ep93xx_uart_data = { + .set_mctrl = ep93xx_uart_set_mctrl, +}; + +static struct amba_device uart1_device = { + .dev = { + .bus_id = "apb:uart1", + .platform_data = &ep93xx_uart_data, + }, + .res = { + .start = EP93XX_UART1_PHYS_BASE, + .end = EP93XX_UART1_PHYS_BASE + 0x0fff, + .flags = IORESOURCE_MEM, + }, + .irq = { IRQ_EP93XX_UART1, NO_IRQ }, + .periphid = 0x00041010, +}; + +static struct amba_device uart2_device = { + .dev = { + .bus_id = "apb:uart2", + .platform_data = &ep93xx_uart_data, + }, + .res = { + .start = EP93XX_UART2_PHYS_BASE, + .end = EP93XX_UART2_PHYS_BASE + 0x0fff, + .flags = IORESOURCE_MEM, + }, + .irq = { IRQ_EP93XX_UART2, NO_IRQ }, + .periphid = 0x00041010, +}; + +static struct amba_device uart3_device = { + .dev = { + .bus_id = "apb:uart3", + .platform_data = &ep93xx_uart_data, + }, + .res = { + .start = EP93XX_UART3_PHYS_BASE, + .end = EP93XX_UART3_PHYS_BASE + 0x0fff, + .flags = IORESOURCE_MEM, + }, + .irq = { IRQ_EP93XX_UART3, NO_IRQ }, + .periphid = 0x00041010, +}; + void __init ep93xx_init_devices(void) { unsigned int v; @@ -371,4 +435,8 @@ void __init ep93xx_init_devices(void) v &= ~EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE; __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); __raw_writel(v, EP93XX_SYSCON_DEVICE_CONFIG); + + amba_device_register(&uart1_device, &iomem_resource); + amba_device_register(&uart2_device, &iomem_resource); + amba_device_register(&uart3_device, &iomem_resource); } -- cgit v1.2.3-18-g5258 From e7104b67040af98664dcd2c9cd36381ac0089f8b Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 26 Mar 2006 14:58:40 -0800 Subject: [SPARC64]: Update defconfig. Signed-off-by: David S. Miller --- arch/sparc64/defconfig | 39 ++++++++++++++------------------------- 1 file changed, 14 insertions(+), 25 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/defconfig b/arch/sparc64/defconfig index f819a9663a8..900fb0b940d 100644 --- a/arch/sparc64/defconfig +++ b/arch/sparc64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.16 -# Mon Mar 20 01:23:21 2006 +# Sun Mar 26 14:58:11 2006 # CONFIG_SPARC=y CONFIG_SPARC64=y @@ -38,6 +38,7 @@ CONFIG_POSIX_MQUEUE=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" CONFIG_UID16=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -53,10 +54,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -68,7 +65,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -76,6 +72,7 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLK_DEV_IO_TRACE=y # # IO Schedulers @@ -111,6 +108,8 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m CONFIG_US3_FREQ=m CONFIG_US2E_FREQ=m CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_HUGETLB_PAGE_SIZE_4MB=y # CONFIG_HUGETLB_PAGE_SIZE_512K is not set @@ -128,7 +127,6 @@ CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_MEMORY_HOTPLUG=y CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_MIGRATION=y CONFIG_GENERIC_ISA_DMA=y CONFIG_SBUS=y CONFIG_SBUSCHAR=y @@ -136,7 +134,6 @@ CONFIG_SUN_AUXIO=y CONFIG_SUN_IO=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y -# CONFIG_PCI_LEGACY_PROC is not set # CONFIG_PCI_DEBUG is not set CONFIG_SUN_OPENPROMFS=m CONFIG_SPARC32_COMPAT=y @@ -201,6 +198,8 @@ CONFIG_TCP_CONG_VEGAS=m CONFIG_TCP_CONG_SCALABLE=m CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m @@ -213,10 +212,12 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m +CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # +CONFIG_IP_DCCP_CCID2=m CONFIG_IP_DCCP_CCID3=m CONFIG_IP_DCCP_TFRC_LIB=m @@ -224,7 +225,6 @@ CONFIG_IP_DCCP_TFRC_LIB=m # DCCP Kernel Hacking # # CONFIG_IP_DCCP_DEBUG is not set -# CONFIG_IP_DCCP_UNLOAD_HACK is not set # # SCTP Configuration (EXPERIMENTAL) @@ -309,6 +309,7 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_UB=m # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_CDROM_PKTCDVD_WCACHE=y @@ -722,7 +723,6 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set @@ -807,10 +807,6 @@ CONFIG_HWMON=y # Misc devices # -# -# Multimedia Capabilities Port drivers -# - # # Multimedia devices # @@ -820,6 +816,7 @@ CONFIG_HWMON=y # Digital Video Broadcasting Devices # # CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set # # Graphics support @@ -901,10 +898,12 @@ CONFIG_SND_SEQ_DUMMY=m CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y # CONFIG_SND_RTCTIMER is not set # CONFIG_SND_DYNAMIC_MINORS is not set CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set @@ -987,6 +986,7 @@ CONFIG_SND_SUN_CS4231=m # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -1014,7 +1014,6 @@ CONFIG_USB_UHCI_HCD=m # # USB Device Class drivers # -# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set @@ -1057,15 +1056,6 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - # # USB Network Adapters # @@ -1194,7 +1184,6 @@ CONFIG_TMPFS=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y -CONFIG_RELAYFS_FS=m # CONFIG_CONFIGFS_FS is not set # -- cgit v1.2.3-18-g5258 From 5d5d7727a8cde78f798ecf04bac8031eff536f9d Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 26 Mar 2006 15:30:29 -0800 Subject: [SPARC64]: Kill duplicate exports of string library functions. Kbuild now points these out. Signed-off-by: David S. Miller --- arch/sparc64/kernel/sparc64_ksyms.c | 10 ---------- 1 file changed, 10 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/sparc64_ksyms.c b/arch/sparc64/kernel/sparc64_ksyms.c index c7fbbcfce82..f5e8db1de76 100644 --- a/arch/sparc64/kernel/sparc64_ksyms.c +++ b/arch/sparc64/kernel/sparc64_ksyms.c @@ -274,18 +274,9 @@ EXPORT_SYMBOL(__prom_getsibling); /* sparc library symbols */ EXPORT_SYMBOL(strlen); -EXPORT_SYMBOL(strnlen); EXPORT_SYMBOL(__strlen_user); EXPORT_SYMBOL(__strnlen_user); -EXPORT_SYMBOL(strcpy); -EXPORT_SYMBOL(strncpy); -EXPORT_SYMBOL(strcat); -EXPORT_SYMBOL(strncat); -EXPORT_SYMBOL(strcmp); -EXPORT_SYMBOL(strchr); -EXPORT_SYMBOL(strrchr); EXPORT_SYMBOL(strpbrk); -EXPORT_SYMBOL(strstr); #ifdef CONFIG_SOLARIS_EMUL_MODULE EXPORT_SYMBOL(linux_sparc_syscall); @@ -319,7 +310,6 @@ EXPORT_SYMBOL(__memscan_zero); EXPORT_SYMBOL(__memscan_generic); EXPORT_SYMBOL(__memcmp); EXPORT_SYMBOL(__memset); -EXPORT_SYMBOL(memchr); EXPORT_SYMBOL(csum_partial); EXPORT_SYMBOL(csum_partial_copy_nocheck); -- cgit v1.2.3-18-g5258 From af308377e204e25f1f58627d05fe0f483703b514 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Thu, 23 Mar 2006 17:38:10 +1100 Subject: [PATCH] powerpc: fix various sparse warnings Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/legacy_serial.c | 4 ++-- arch/powerpc/kernel/nvram_64.c | 3 ++- arch/powerpc/kernel/process.c | 6 +++++- arch/powerpc/kernel/setup_32.c | 2 +- arch/powerpc/lib/sstep.c | 2 +- arch/powerpc/platforms/powermac/bootx_init.c | 2 +- arch/powerpc/platforms/powermac/nvram.c | 12 ++++++------ arch/powerpc/platforms/powermac/udbg_scc.c | 2 +- 8 files changed, 19 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index c7a799a0951..09d9c825fa9 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -37,7 +37,7 @@ static int legacy_serial_console = -1; static int __init add_legacy_port(struct device_node *np, int want_index, int iotype, phys_addr_t base, phys_addr_t taddr, unsigned long irq, - unsigned int flags) + upf_t flags) { u32 *clk, *spd, clock = BASE_BAUD * 16; int index; @@ -113,7 +113,7 @@ static int __init add_legacy_soc_port(struct device_node *np, { phys_addr_t addr; u32 *addrp; - unsigned int flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ; + upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ; /* We only support ports that have a clock frequency properly * encoded in the device-tree. diff --git a/arch/powerpc/kernel/nvram_64.c b/arch/powerpc/kernel/nvram_64.c index fd7db8d542d..6c3989f6247 100644 --- a/arch/powerpc/kernel/nvram_64.c +++ b/arch/powerpc/kernel/nvram_64.c @@ -174,8 +174,9 @@ static int dev_nvram_ioctl(struct inode *inode, struct file *file, return 0; } #endif /* CONFIG_PPC_PMAC */ + default: + return -EINVAL; } - return -EINVAL; } struct file_operations nvram_fops = { diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index f698aa77127..995b14688d3 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -362,7 +362,11 @@ static void show_instructions(struct pt_regs *regs) if (!(i % 8)) printk("\n"); - if (BAD_PC(pc) || __get_user(instr, (unsigned int *)pc)) { + /* We use __get_user here *only* to avoid an OOPS on a + * bad address because the pc *should* only be a + * kernel address. + */ + if (BAD_PC(pc) || __get_user(instr, (unsigned int __user *)pc)) { printk("XXXXXXXX "); } else { if (regs->nip == pc) diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index dc2770df25b..676f894c338 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -111,7 +111,7 @@ unsigned long __init early_init(unsigned long dt_ptr) /* First zero the BSS -- use memset_io, some platforms don't have * caches on yet */ - memset_io(PTRRELOC(&__bss_start), 0, _end - __bss_start); + memset_io((void __iomem *)PTRRELOC(&__bss_start), 0, _end - __bss_start); /* * Identify the CPU type and fix up code sections diff --git a/arch/powerpc/lib/sstep.c b/arch/powerpc/lib/sstep.c index 666c2aa5501..c251d993661 100644 --- a/arch/powerpc/lib/sstep.c +++ b/arch/powerpc/lib/sstep.c @@ -18,7 +18,7 @@ extern char system_call_common[]; #ifdef CONFIG_PPC64 /* Bits in SRR1 that are copied from MSR */ -#define MSR_MASK 0xffffffff87c0ffff +#define MSR_MASK 0xffffffff87c0ffffUL #else #define MSR_MASK 0x87c0ffff #endif diff --git a/arch/powerpc/platforms/powermac/bootx_init.c b/arch/powerpc/platforms/powermac/bootx_init.c index fa8b4d7b5de..a94571be65c 100644 --- a/arch/powerpc/platforms/powermac/bootx_init.c +++ b/arch/powerpc/platforms/powermac/bootx_init.c @@ -493,7 +493,7 @@ void __init bootx_init(unsigned long r3, unsigned long r4) && (strcmp(model, "iMac,1") == 0 || strcmp(model, "PowerMac1,1") == 0)) { bootx_printf("iMac,1 detected, shutting down USB \n"); - out_le32((unsigned *)0x80880008, 1); /* XXX */ + out_le32((unsigned __iomem *)0x80880008, 1); /* XXX */ } } diff --git a/arch/powerpc/platforms/powermac/nvram.c b/arch/powerpc/platforms/powermac/nvram.c index 5fd28995c74..3aa3477b86f 100644 --- a/arch/powerpc/platforms/powermac/nvram.c +++ b/arch/powerpc/platforms/powermac/nvram.c @@ -74,7 +74,7 @@ struct core99_header { * Read and write the non-volatile RAM on PowerMacs and CHRP machines. */ static int nvram_naddrs; -static volatile unsigned char *nvram_data; +static volatile unsigned char __iomem *nvram_data; static int is_core_99; static int core99_bank = 0; static int nvram_partitions[3]; @@ -148,7 +148,7 @@ static ssize_t core99_nvram_size(void) } #ifdef CONFIG_PPC32 -static volatile unsigned char *nvram_addr; +static volatile unsigned char __iomem *nvram_addr; static int nvram_mult; static unsigned char direct_nvram_read_byte(int addr) @@ -285,7 +285,7 @@ static int sm_erase_bank(int bank) int stat, i; unsigned long timeout; - u8* base = (u8 *)nvram_data + core99_bank*NVRAM_SIZE; + u8 __iomem *base = (u8 __iomem *)nvram_data + core99_bank*NVRAM_SIZE; DBG("nvram: Sharp/Micron Erasing bank %d...\n", bank); @@ -317,7 +317,7 @@ static int sm_write_bank(int bank, u8* datas) int i, stat = 0; unsigned long timeout; - u8* base = (u8 *)nvram_data + core99_bank*NVRAM_SIZE; + u8 __iomem *base = (u8 __iomem *)nvram_data + core99_bank*NVRAM_SIZE; DBG("nvram: Sharp/Micron Writing bank %d...\n", bank); @@ -352,7 +352,7 @@ static int amd_erase_bank(int bank) int i, stat = 0; unsigned long timeout; - u8* base = (u8 *)nvram_data + core99_bank*NVRAM_SIZE; + u8 __iomem *base = (u8 __iomem *)nvram_data + core99_bank*NVRAM_SIZE; DBG("nvram: AMD Erasing bank %d...\n", bank); @@ -399,7 +399,7 @@ static int amd_write_bank(int bank, u8* datas) int i, stat = 0; unsigned long timeout; - u8* base = (u8 *)nvram_data + core99_bank*NVRAM_SIZE; + u8 __iomem *base = (u8 __iomem *)nvram_data + core99_bank*NVRAM_SIZE; DBG("nvram: AMD Writing bank %d...\n", bank); diff --git a/arch/powerpc/platforms/powermac/udbg_scc.c b/arch/powerpc/platforms/powermac/udbg_scc.c index c4352a8db64..b4fa9f03b46 100644 --- a/arch/powerpc/platforms/powermac/udbg_scc.c +++ b/arch/powerpc/platforms/powermac/udbg_scc.c @@ -116,7 +116,7 @@ void udbg_scc_init(int force_scc) /* Setup for 57600 8N1 */ if (ch == ch_a) addr += 0x20; - sccc = (volatile u8 * __iomem) ioremap(addr & PAGE_MASK, PAGE_SIZE) ; + sccc = ioremap(addr & PAGE_MASK, PAGE_SIZE) ; sccc += addr & ~PAGE_MASK; sccd = sccc + 0x10; -- cgit v1.2.3-18-g5258 From 5fa500bfc60f36c54bb20338795cc2facc0425f6 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 23 Mar 2006 00:00:04 +0100 Subject: [PATCH] powerpc: fix cell iommu setup A small bug crept in the iommu driver when we made it more generic. This patch is needed for boards that have a dma window that does not start at bus address zero. Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/iommu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index 46e7cb9c3e6..c8a98be8b6a 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -289,7 +289,7 @@ static void cell_do_map_iommu(struct cell_iommu *iommu, ioc_base = iommu->mapped_base; ioc_mmio_base = iommu->mapped_mmio_base; - for (real_address = 0, io_address = 0; + for (real_address = 0, io_address = map_start; io_address <= map_start + map_size; real_address += io_page_size, io_address += io_page_size) { ioste = get_iost_entry(fake_iopt, io_address, io_page_size); @@ -302,7 +302,7 @@ static void cell_do_map_iommu(struct cell_iommu *iommu, set_iopt_cache(ioc_mmio_base, get_ioc_hash_1way(ioste, io_address), get_ioc_tag(ioste, io_address), - get_iopt_entry(real_address-map_start, ioid, IOPT_PROT_RW)); + get_iopt_entry(real_address, ioid, IOPT_PROT_RW)); } } -- cgit v1.2.3-18-g5258 From 1a19f85584414ae0a9f94406ffd628096127583e Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 23 Mar 2006 00:00:05 +0100 Subject: [PATCH] powerpc: update cell defconfig The default configuration in mainline got a little out of sync with what we use internally. Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/configs/cell_defconfig | 133 ++++++++++++++---------------------- 1 file changed, 52 insertions(+), 81 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig index 3c2acab6373..fe22e54ab2b 100644 --- a/arch/powerpc/configs/cell_defconfig +++ b/arch/powerpc/configs/cell_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc6 -# Wed Mar 15 16:19:48 2006 +# Linux kernel version: 2.6.16 +# Thu Mar 23 20:48:09 2006 # CONFIG_PPC64=y CONFIG_64BIT=y @@ -30,6 +30,7 @@ CONFIG_POWER4=y CONFIG_PPC_FPU=y CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y +CONFIG_VIRT_CPU_ACCOUNTING=y CONFIG_SMP=y CONFIG_NR_CPUS=4 @@ -51,7 +52,8 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -85,7 +87,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_STOP_MACHINE=y # @@ -130,7 +132,8 @@ CONFIG_CELL_IIC=y # # Cell Broadband Engine options # -CONFIG_SPU_FS=y +CONFIG_SPU_FS=m +CONFIG_SPUFS_MMAP=y # # Kernel options @@ -144,7 +147,7 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_PREEMPT_BKL=y CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set +CONFIG_BINFMT_MISC=m CONFIG_FORCE_MAX_ZONEORDER=13 # CONFIG_IOMMU_VMERGE is not set CONFIG_KEXEC=y @@ -155,13 +158,16 @@ CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y +# CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_EXTREME=y +# CONFIG_MEMORY_HOTPLUG is not set CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_PPC_64K_PAGES is not set CONFIG_SCHED_SMT=y CONFIG_PROC_DEVICETREE=y @@ -232,6 +238,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IP_VS is not set CONFIG_IPV6=y # CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m @@ -244,25 +251,7 @@ CONFIG_NETFILTER=y # Core Netfilter Configuration # # CONFIG_NETFILTER_NETLINK is not set -CONFIG_NETFILTER_XTABLES=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -CONFIG_NETFILTER_XT_TARGET_NOTRACK=m -CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -# CONFIG_NETFILTER_XT_MATCH_DCCP is not set -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_SCTP=m -CONFIG_NETFILTER_XT_MATCH_STATE=m -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +# CONFIG_NETFILTER_XTABLES is not set # # IP: Netfilter Configuration @@ -278,51 +267,13 @@ CONFIG_IP_NF_IRC=m CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m # CONFIG_IP_NF_PPTP is not set +# CONFIG_IP_NF_H323 is not set CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_POLICY=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m # # IPv6: Netfilter Configuration (EXPERIMENTAL) # # CONFIG_IP6_NF_QUEUE is not set -# CONFIG_IP6_NF_IPTABLES is not set # # DCCP Configuration (EXPERIMENTAL) @@ -355,7 +306,6 @@ CONFIG_IP_NF_ARP_MANGLE=m # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y # # Network testing @@ -408,7 +358,7 @@ CONFIG_FW_LOADER=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=y +# CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 @@ -484,7 +434,23 @@ CONFIG_IDEDMA_AUTO=y # # Multi-device support (RAID and LVM) # -# CONFIG_MD is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +# CONFIG_MD_RAID10 is not set +# CONFIG_MD_RAID5 is not set +# CONFIG_MD_RAID6 is not set +# CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set +CONFIG_BLK_DEV_DM=m +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +# CONFIG_DM_MULTIPATH_EMC is not set # # Fusion MPT device support @@ -548,7 +514,7 @@ CONFIG_MII=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=m -# CONFIG_E1000_NAPI is not set +CONFIG_E1000_NAPI=y # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set @@ -560,7 +526,7 @@ CONFIG_SKGE=m # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set -CONFIG_SPIDER_NET=y +CONFIG_SPIDER_NET=m # CONFIG_MV643XX_ETH is not set # @@ -678,6 +644,8 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set +CONFIG_HVC_DRIVER=y +CONFIG_HVC_RTAS=y # # IPMI @@ -694,14 +662,13 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -# CONFIG_WATCHDOG_RTAS is not set +CONFIG_WATCHDOG_RTAS=y # # PCI-based Watchdog Cards # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set -# CONFIG_RTC is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set @@ -833,6 +800,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -852,7 +820,14 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # InfiniBand support # -# CONFIG_INFINIBAND is not set +CONFIG_INFINIBAND=y +CONFIG_INFINIBAND_USER_MAD=m +CONFIG_INFINIBAND_USER_ACCESS=m +CONFIG_INFINIBAND_MTHCA=m +CONFIG_INFINIBAND_MTHCA_DEBUG=y +CONFIG_INFINIBAND_IPOIB=m +CONFIG_INFINIBAND_IPOIB_DEBUG=y +CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y # # EDAC - error detection and reporting (RAS) (EXPERIMENTAL) @@ -1037,10 +1012,6 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m # # Instrumentation Support @@ -1058,7 +1029,7 @@ CONFIG_LOG_BUF_SHIFT=15 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_MUTEXES is not set +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_KOBJECT is not set -- cgit v1.2.3-18-g5258 From d0e57c68373f8ded8c50245fd082e606f9f63221 Mon Sep 17 00:00:00 2001 From: Jens Osterkamp Date: Thu, 23 Mar 2006 00:00:06 +0100 Subject: [PATCH] powerpc: cell interrupt controller updates The current interrupt controller setup on Cell is done in a rather ad-hoc way with device tree properties that are not standardized at all. In an attempt to do something that follows the OF standard (or at least the IBM extensions to it) more closely, we have now come up with this patch. It still provides a fallback to the old behaviour when we find older firmware, that hack can not be removed until the existing customer installations have upgraded. Cc: hpenner@de.ibm.com Cc: stk@de.ibm.com Cc: Segher Boessenkool Cc: Milton Miller Cc: benh@kernel.crashing.org Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/interrupt.c | 116 ++++++++++++++++++++++++------- arch/powerpc/platforms/cell/interrupt.h | 2 +- arch/powerpc/platforms/cell/spider-pic.c | 106 ++++++++++++++++++++-------- 3 files changed, 169 insertions(+), 55 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c index 63aa52acf44..9d41e07b0c9 100644 --- a/arch/powerpc/platforms/cell/interrupt.c +++ b/arch/powerpc/platforms/cell/interrupt.c @@ -123,7 +123,7 @@ static int iic_external_get_irq(struct iic_pending_bits pending) pending.class != 2) break; irq = IIC_EXT_OFFSET - + spider_get_irq(pending.prio + node * IIC_NODE_STRIDE) + + spider_get_irq(node) + node * IIC_NODE_STRIDE; break; case 0x01 ... 0x04: @@ -174,38 +174,102 @@ int iic_get_irq(struct pt_regs *regs) return irq; } -static int setup_iic(int cpu, struct iic *iic) +/* hardcoded part to be compatible with older firmware */ + +static int setup_iic_hardcoded(void) { struct device_node *np; - int nodeid = cpu / 2; + int nodeid, cpu; unsigned long regs; + struct iic *iic; - for (np = of_find_node_by_type(NULL, "cpu"); - np; - np = of_find_node_by_type(np, "cpu")) { - if (nodeid == *(int *)get_property(np, "node-id", NULL)) - break; + for_each_cpu(cpu) { + iic = &per_cpu(iic, cpu); + nodeid = cpu/2; + + for (np = of_find_node_by_type(NULL, "cpu"); + np; + np = of_find_node_by_type(np, "cpu")) { + if (nodeid == *(int *)get_property(np, "node-id", NULL)) + break; + } + + if (!np) { + printk(KERN_WARNING "IIC: CPU %d not found\n", cpu); + iic->regs = NULL; + iic->target_id = 0xff; + return -ENODEV; + } + + regs = *(long *)get_property(np, "iic", NULL); + + /* hack until we have decided on the devtree info */ + regs += 0x400; + if (cpu & 1) + regs += 0x20; + + printk(KERN_INFO "IIC for CPU %d at %lx\n", cpu, regs); + iic->regs = __ioremap(regs, sizeof(struct iic_regs), + _PAGE_NO_CACHE); + + iic->target_id = (nodeid << 4) + ((cpu & 1) ? 0xf : 0xe); } - if (!np) { - printk(KERN_WARNING "IIC: CPU %d not found\n", cpu); - iic->regs = NULL; - iic->target_id = 0xff; - return -ENODEV; - } + return 0; +} - regs = *(long *)get_property(np, "iic", NULL); +static int setup_iic(void) +{ + struct device_node *dn; + unsigned long *regs; + char *compatible; + unsigned *np, found = 0; + struct iic *iic = NULL; + + for (dn = NULL; (dn = of_find_node_by_name(dn, "interrupt-controller"));) { + compatible = (char *)get_property(dn, "compatible", NULL); + + if (!compatible) { + printk(KERN_WARNING "no compatible property found !\n"); + continue; + } - /* hack until we have decided on the devtree info */ - regs += 0x400; - if (cpu & 1) - regs += 0x20; + if (strstr(compatible, "IBM,CBEA-Internal-Interrupt-Controller")) + regs = (unsigned long *)get_property(dn,"reg", NULL); + else + continue; - printk(KERN_DEBUG "IIC for CPU %d at %lx\n", cpu, regs); - iic->regs = __ioremap(regs, sizeof(struct iic_regs), - _PAGE_NO_CACHE); - iic->target_id = (nodeid << 4) + ((cpu & 1) ? 0xf : 0xe); - return 0; + if (!regs) + printk(KERN_WARNING "IIC: no reg property\n"); + + np = (unsigned int *)get_property(dn, "ibm,interrupt-server-ranges", NULL); + + if (!np) { + printk(KERN_WARNING "IIC: CPU association not found\n"); + iic->regs = NULL; + iic->target_id = 0xff; + return -ENODEV; + } + + iic = &per_cpu(iic, np[0]); + iic->regs = __ioremap(regs[0], sizeof(struct iic_regs), + _PAGE_NO_CACHE); + iic->target_id = ((np[0] & 2) << 3) + ((np[0] & 1) ? 0xf : 0xe); + printk("IIC for CPU %d at %lx mapped to %p\n", np[0], regs[0], iic->regs); + + iic = &per_cpu(iic, np[1]); + iic->regs = __ioremap(regs[2], sizeof(struct iic_regs), + _PAGE_NO_CACHE); + iic->target_id = ((np[1] & 2) << 3) + ((np[1] & 1) ? 0xf : 0xe); + printk("IIC for CPU %d at %lx mapped to %p\n", np[1], regs[2], iic->regs); + + found++; + } + + if (found) + return 0; + else + return -ENODEV; } #ifdef CONFIG_SMP @@ -283,10 +347,12 @@ void iic_init_IRQ(void) int cpu, irq_offset; struct iic *iic; + if (setup_iic() < 0) + setup_iic_hardcoded(); + irq_offset = 0; for_each_cpu(cpu) { iic = &per_cpu(iic, cpu); - setup_iic(cpu, iic); if (iic->regs) out_be64(&iic->regs->prio, 0xff); } diff --git a/arch/powerpc/platforms/cell/interrupt.h b/arch/powerpc/platforms/cell/interrupt.h index a14bd38791c..799f77d98f9 100644 --- a/arch/powerpc/platforms/cell/interrupt.h +++ b/arch/powerpc/platforms/cell/interrupt.h @@ -57,7 +57,7 @@ extern void iic_local_disable(void); extern u8 iic_get_target_id(int cpu); extern void spider_init_IRQ(void); -extern int spider_get_irq(unsigned long int_pending); +extern int spider_get_irq(int node); #endif #endif /* ASM_CELL_PIC_H */ diff --git a/arch/powerpc/platforms/cell/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c index e74132188bd..0e9bb0b72c5 100644 --- a/arch/powerpc/platforms/cell/spider-pic.c +++ b/arch/powerpc/platforms/cell/spider-pic.c @@ -84,10 +84,11 @@ static void __iomem *spider_get_irq_config(int irq) static void spider_enable_irq(unsigned int irq) { + int nodeid = (irq / IIC_NODE_STRIDE) * 0x10; void __iomem *cfg = spider_get_irq_config(irq); irq = spider_get_nr(irq); - out_be32(cfg, in_be32(cfg) | 0x3107000eu); + out_be32(cfg, in_be32(cfg) | 0x3107000eu | nodeid); out_be32(cfg + 4, in_be32(cfg + 4) | 0x00020000u | irq); } @@ -131,61 +132,108 @@ static struct hw_interrupt_type spider_pic = { .end = spider_end_irq, }; - -int spider_get_irq(unsigned long int_pending) +int spider_get_irq(int node) { - void __iomem *regs = spider_get_pic(int_pending); unsigned long cs; - int irq; - - cs = in_be32(regs + TIR_CS); + void __iomem *regs = spider_pics[node]; - irq = cs >> 24; - if (irq != 63) - return irq; + cs = in_be32(regs + TIR_CS) >> 24; - return -1; + if (cs == 63) + return -1; + else + return cs; } - -void spider_init_IRQ(void) + +/* hardcoded part to be compatible with older firmware */ + +void spider_init_IRQ_hardcoded(void) { int node; - struct device_node *dn; - unsigned int *property; long spiderpic; + long pics[] = { 0x24000008000, 0x34000008000 }; int n; -/* FIXME: detect multiple PICs as soon as the device tree has them */ - for (node = 0; node < 1; node++) { - dn = of_find_node_by_path("/"); - n = prom_n_addr_cells(dn); - property = (unsigned int *) get_property(dn, - "platform-spider-pic", NULL); + pr_debug("%s(%d): Using hardcoded defaults\n", __FUNCTION__, __LINE__); - if (!property) - continue; - for (spiderpic = 0; n > 0; --n) - spiderpic = (spiderpic << 32) + *property++; + for (node = 0; node < num_present_cpus()/2; node++) { + spiderpic = pics[node]; printk(KERN_DEBUG "SPIDER addr: %lx\n", spiderpic); spider_pics[node] = __ioremap(spiderpic, 0x800, _PAGE_NO_CACHE); for (n = 0; n < IIC_NUM_EXT; n++) { int irq = n + IIC_EXT_OFFSET + node * IIC_NODE_STRIDE; get_irq_desc(irq)->handler = &spider_pic; + } /* do not mask any interrupts because of level */ out_be32(spider_pics[node] + TIR_MSK, 0x0); - + /* disable edge detection clear */ /* out_be32(spider_pics[node] + TIR_EDC, 0x0); */ - + /* enable interrupt packets to be output */ out_be32(spider_pics[node] + TIR_PIEN, in_be32(spider_pics[node] + TIR_PIEN) | 0x1); - + /* Enable the interrupt detection enable bit. Do this last! */ out_be32(spider_pics[node] + TIR_DEN, - in_be32(spider_pics[node] +TIR_DEN) | 0x1); + in_be32(spider_pics[node] + TIR_DEN) | 0x1); + } +} + +void spider_init_IRQ(void) +{ + long spider_reg; + struct device_node *dn; + char *compatible; + int n, node = 0; + + for (dn = NULL; (dn = of_find_node_by_name(dn, "interrupt-controller"));) { + compatible = (char *)get_property(dn, "compatible", NULL); + if (!compatible) + continue; + + if (strstr(compatible, "CBEA,platform-spider-pic")) + spider_reg = *(long *)get_property(dn,"reg", NULL); + else if (strstr(compatible, "sti,platform-spider-pic")) { + spider_init_IRQ_hardcoded(); + return; + } else + continue; + + if (!spider_reg) + printk("interrupt controller does not have reg property !\n"); + + n = prom_n_addr_cells(dn); + + if ( n != 2) + printk("reg property with invalid number of elements \n"); + + spider_pics[node] = __ioremap(spider_reg, 0x800, _PAGE_NO_CACHE); + + printk("SPIDER addr: %lx with %i addr_cells mapped to %p\n", + spider_reg, n, spider_pics[node]); + + for (n = 0; n < IIC_NUM_EXT; n++) { + int irq = n + IIC_EXT_OFFSET + node * IIC_NODE_STRIDE; + get_irq_desc(irq)->handler = &spider_pic; } + + /* do not mask any interrupts because of level */ + out_be32(spider_pics[node] + TIR_MSK, 0x0); + + /* disable edge detection clear */ + /* out_be32(spider_pics[node] + TIR_EDC, 0x0); */ + + /* enable interrupt packets to be output */ + out_be32(spider_pics[node] + TIR_PIEN, + in_be32(spider_pics[node] + TIR_PIEN) | 0x1); + + /* Enable the interrupt detection enable bit. Do this last! */ + out_be32(spider_pics[node] + TIR_DEN, + in_be32(spider_pics[node] + TIR_DEN) | 0x1); + + node++; } } -- cgit v1.2.3-18-g5258 From 5536408c21cdde38bfdbb59a6fd4fcbf1232699f Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 23 Mar 2006 00:00:07 +0100 Subject: [PATCH] powerpc: work around a cell interrupt HW bug Apparently we have found a bug in the CPU that causes external interrupts to sometimes get disabled indefinitely. This adds a workaround for the problem. Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/interrupt.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c index 9d41e07b0c9..e3fffdfcc67 100644 --- a/arch/powerpc/platforms/cell/interrupt.c +++ b/arch/powerpc/platforms/cell/interrupt.c @@ -63,7 +63,24 @@ static DEFINE_PER_CPU(struct iic, iic); void iic_local_enable(void) { - out_be64(&__get_cpu_var(iic).regs->prio, 0xff); + struct iic *iic = &__get_cpu_var(iic); + u64 tmp; + + /* + * There seems to be a bug that is present in DD2.x CPUs + * and still only partially fixed in DD3.1. + * This bug causes a value written to the priority register + * not to make it there, resulting in a system hang unless we + * write it again. + * Masking with 0xf0 is done because the Cell BE does not + * implement the lower four bits of the interrupt priority, + * they always read back as zeroes, although future CPUs + * might implement different bits. + */ + do { + out_be64(&iic->regs->prio, 0xff); + tmp = in_be64(&iic->regs->prio); + } while ((tmp & 0xf0) != 0xf0); } void iic_local_disable(void) -- cgit v1.2.3-18-g5258 From a7f31841a40776605c834053ad1eb82d539bd79f Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 23 Mar 2006 00:00:08 +0100 Subject: [PATCH] powerpc: declare arch syscalls in powerpc currently declares some of its own system calls in , but not all of them. That place also contains remainders of the now almost unused kernel syscall hack. - Add a new with clean declarations - Include that file from every source that implements one of these - Get rid of old declarations in This patch is required as a base for implementing system calls from an SPU, but also makes sense as a general cleanup. Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/process.c | 1 + arch/powerpc/kernel/rtas.c | 1 + arch/powerpc/kernel/signal_32.c | 1 + arch/powerpc/kernel/signal_64.c | 1 + arch/powerpc/kernel/syscalls.c | 1 + 5 files changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 995b14688d3..c6e81bbd615 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -45,6 +45,7 @@ #include #include #include +#include #ifdef CONFIG_PPC64 #include #endif diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index b5b2add7ad1..142d818a31a 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -32,6 +32,7 @@ #include #include #include +#include struct rtas_t rtas = { .lock = SPIN_LOCK_UNLOCKED diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index d7a4e814974..01e3c08cb55 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -42,6 +42,7 @@ #include #include +#include #include #include #ifdef CONFIG_PPC64 diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index 47f910380a6..82ec2f3f671 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #define DEBUG_SIG 0 diff --git a/arch/powerpc/kernel/syscalls.c b/arch/powerpc/kernel/syscalls.c index ad895c99813..9b69d99a910 100644 --- a/arch/powerpc/kernel/syscalls.c +++ b/arch/powerpc/kernel/syscalls.c @@ -40,6 +40,7 @@ #include #include #include +#include #include #include -- cgit v1.2.3-18-g5258 From 2dd14934c9138c562d93c501e88c6d6f061eb8ba Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 23 Mar 2006 00:00:09 +0100 Subject: [PATCH] spufs: allow SPU code to do syscalls An SPU does not have a way to implement system calls itself, but it can create intercepts to the kernel. This patch uses the method defined by the JSRE interface for C99 host library calls from an SPU to implement Linux system calls. It uses the reserved SPU stop code 0x2104 for this, using the structure layout and syscall numbers for ppc64-linux. I'm still undecided wether it is better to have a list of allowed syscalls or a list of forbidden syscalls, since we can't allow an SPU to call all syscalls that are defined for ppc64-linux. This patch implements the easier choice of them, with a blacklist that only prevents an SPU from calling anything that interacts with its own execution, e.g fork, execve, clone, vfork, exit, spu_run and spu_create and everything that deals with signals. Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/Makefile | 10 +- arch/powerpc/platforms/cell/spu_callbacks.c | 345 ++++++++++++++++++++++++++++ arch/powerpc/platforms/cell/spufs/run.c | 91 ++++++++ 3 files changed, 444 insertions(+), 2 deletions(-) create mode 100644 arch/powerpc/platforms/cell/spu_callbacks.c (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile index 3b998a393e3..e570bad0639 100644 --- a/arch/powerpc/platforms/cell/Makefile +++ b/arch/powerpc/platforms/cell/Makefile @@ -6,5 +6,11 @@ obj-$(CONFIG_SPU_FS) += spu-base.o spufs/ spu-base-y += spu_base.o spu_priv1.o -builtin-spufs-$(CONFIG_SPU_FS) += spu_syscalls.o -obj-y += $(builtin-spufs-m) +# needed only when building loadable spufs.ko +spufs-modular-$(CONFIG_SPU_FS) += spu_syscalls.o +obj-y += $(spufs-modular-m) + +# always needed in kernel +spufs-builtin-$(CONFIG_SPU_FS) += spu_callbacks.o +obj-y += $(spufs-builtin-y) $(spufs-builtin-m) + diff --git a/arch/powerpc/platforms/cell/spu_callbacks.c b/arch/powerpc/platforms/cell/spu_callbacks.c new file mode 100644 index 00000000000..3a4245c926a --- /dev/null +++ b/arch/powerpc/platforms/cell/spu_callbacks.c @@ -0,0 +1,345 @@ +/* + * System call callback functions for SPUs + */ + +#define DEBUG + +#include +#include +#include + +#include +#include +#include + +/* + * This table defines the system calls that an SPU can call. + * It is currently a subset of the 64 bit powerpc system calls, + * with the exact semantics. + * + * The reasons for disabling some of the system calls are: + * 1. They interact with the way SPU syscalls are handled + * and we can't let them execute ever: + * restart_syscall, exit, for, execve, ptrace, ... + * 2. They are deprecated and replaced by other means: + * uselib, pciconfig_*, sysfs, ... + * 3. They are somewhat interacting with the system in a way + * we don't want an SPU to: + * reboot, init_module, mount, kexec_load + * 4. They are optional and we can't rely on them being + * linked into the kernel. Unfortunately, the cond_syscall + * helper does not work here as it does not add the necessary + * opd symbols: + * mbind, mq_open, ipc, ... + */ + +void *spu_syscall_table[] = { + [__NR_restart_syscall] sys_ni_syscall, /* sys_restart_syscall */ + [__NR_exit] sys_ni_syscall, /* sys_exit */ + [__NR_fork] sys_ni_syscall, /* ppc_fork */ + [__NR_read] sys_read, + [__NR_write] sys_write, + [__NR_open] sys_open, + [__NR_close] sys_close, + [__NR_waitpid] sys_waitpid, + [__NR_creat] sys_creat, + [__NR_link] sys_link, + [__NR_unlink] sys_unlink, + [__NR_execve] sys_ni_syscall, /* sys_execve */ + [__NR_chdir] sys_chdir, + [__NR_time] sys_time, + [__NR_mknod] sys_mknod, + [__NR_chmod] sys_chmod, + [__NR_lchown] sys_lchown, + [__NR_break] sys_ni_syscall, + [__NR_oldstat] sys_ni_syscall, + [__NR_lseek] sys_lseek, + [__NR_getpid] sys_getpid, + [__NR_mount] sys_ni_syscall, /* sys_mount */ + [__NR_umount] sys_ni_syscall, + [__NR_setuid] sys_setuid, + [__NR_getuid] sys_getuid, + [__NR_stime] sys_stime, + [__NR_ptrace] sys_ni_syscall, /* sys_ptrace */ + [__NR_alarm] sys_alarm, + [__NR_oldfstat] sys_ni_syscall, + [__NR_pause] sys_ni_syscall, /* sys_pause */ + [__NR_utime] sys_ni_syscall, /* sys_utime */ + [__NR_stty] sys_ni_syscall, + [__NR_gtty] sys_ni_syscall, + [__NR_access] sys_access, + [__NR_nice] sys_nice, + [__NR_ftime] sys_ni_syscall, + [__NR_sync] sys_sync, + [__NR_kill] sys_kill, + [__NR_rename] sys_rename, + [__NR_mkdir] sys_mkdir, + [__NR_rmdir] sys_rmdir, + [__NR_dup] sys_dup, + [__NR_pipe] sys_pipe, + [__NR_times] sys_times, + [__NR_prof] sys_ni_syscall, + [__NR_brk] sys_brk, + [__NR_setgid] sys_setgid, + [__NR_getgid] sys_getgid, + [__NR_signal] sys_ni_syscall, /* sys_signal */ + [__NR_geteuid] sys_geteuid, + [__NR_getegid] sys_getegid, + [__NR_acct] sys_ni_syscall, /* sys_acct */ + [__NR_umount2] sys_ni_syscall, /* sys_umount */ + [__NR_lock] sys_ni_syscall, + [__NR_ioctl] sys_ioctl, + [__NR_fcntl] sys_fcntl, + [__NR_mpx] sys_ni_syscall, + [__NR_setpgid] sys_setpgid, + [__NR_ulimit] sys_ni_syscall, + [__NR_oldolduname] sys_ni_syscall, + [__NR_umask] sys_umask, + [__NR_chroot] sys_chroot, + [__NR_ustat] sys_ni_syscall, /* sys_ustat */ + [__NR_dup2] sys_dup2, + [__NR_getppid] sys_getppid, + [__NR_getpgrp] sys_getpgrp, + [__NR_setsid] sys_setsid, + [__NR_sigaction] sys_ni_syscall, + [__NR_sgetmask] sys_sgetmask, + [__NR_ssetmask] sys_ssetmask, + [__NR_setreuid] sys_setreuid, + [__NR_setregid] sys_setregid, + [__NR_sigsuspend] sys_ni_syscall, + [__NR_sigpending] sys_ni_syscall, + [__NR_sethostname] sys_sethostname, + [__NR_setrlimit] sys_setrlimit, + [__NR_getrlimit] sys_ni_syscall, + [__NR_getrusage] sys_getrusage, + [__NR_gettimeofday] sys_gettimeofday, + [__NR_settimeofday] sys_settimeofday, + [__NR_getgroups] sys_getgroups, + [__NR_setgroups] sys_setgroups, + [__NR_select] sys_ni_syscall, + [__NR_symlink] sys_symlink, + [__NR_oldlstat] sys_ni_syscall, + [__NR_readlink] sys_readlink, + [__NR_uselib] sys_ni_syscall, /* sys_uselib */ + [__NR_swapon] sys_ni_syscall, /* sys_swapon */ + [__NR_reboot] sys_ni_syscall, /* sys_reboot */ + [__NR_readdir] sys_ni_syscall, + [__NR_mmap] sys_mmap, + [__NR_munmap] sys_munmap, + [__NR_truncate] sys_truncate, + [__NR_ftruncate] sys_ftruncate, + [__NR_fchmod] sys_fchmod, + [__NR_fchown] sys_fchown, + [__NR_getpriority] sys_getpriority, + [__NR_setpriority] sys_setpriority, + [__NR_profil] sys_ni_syscall, + [__NR_statfs] sys_ni_syscall, /* sys_statfs */ + [__NR_fstatfs] sys_ni_syscall, /* sys_fstatfs */ + [__NR_ioperm] sys_ni_syscall, + [__NR_socketcall] sys_socketcall, + [__NR_syslog] sys_syslog, + [__NR_setitimer] sys_setitimer, + [__NR_getitimer] sys_getitimer, + [__NR_stat] sys_newstat, + [__NR_lstat] sys_newlstat, + [__NR_fstat] sys_newfstat, + [__NR_olduname] sys_ni_syscall, + [__NR_iopl] sys_ni_syscall, + [__NR_vhangup] sys_vhangup, + [__NR_idle] sys_ni_syscall, + [__NR_vm86] sys_ni_syscall, + [__NR_wait4] sys_wait4, + [__NR_swapoff] sys_ni_syscall, /* sys_swapoff */ + [__NR_sysinfo] sys_sysinfo, + [__NR_ipc] sys_ni_syscall, /* sys_ipc */ + [__NR_fsync] sys_fsync, + [__NR_sigreturn] sys_ni_syscall, + [__NR_clone] sys_ni_syscall, /* ppc_clone */ + [__NR_setdomainname] sys_setdomainname, + [__NR_uname] ppc_newuname, + [__NR_modify_ldt] sys_ni_syscall, + [__NR_adjtimex] sys_adjtimex, + [__NR_mprotect] sys_mprotect, + [__NR_sigprocmask] sys_ni_syscall, + [__NR_create_module] sys_ni_syscall, + [__NR_init_module] sys_ni_syscall, /* sys_init_module */ + [__NR_delete_module] sys_ni_syscall, /* sys_delete_module */ + [__NR_get_kernel_syms] sys_ni_syscall, + [__NR_quotactl] sys_ni_syscall, /* sys_quotactl */ + [__NR_getpgid] sys_getpgid, + [__NR_fchdir] sys_fchdir, + [__NR_bdflush] sys_bdflush, + [__NR_sysfs] sys_ni_syscall, /* sys_sysfs */ + [__NR_personality] ppc64_personality, + [__NR_afs_syscall] sys_ni_syscall, + [__NR_setfsuid] sys_setfsuid, + [__NR_setfsgid] sys_setfsgid, + [__NR__llseek] sys_llseek, + [__NR_getdents] sys_getdents, + [__NR__newselect] sys_select, + [__NR_flock] sys_flock, + [__NR_msync] sys_msync, + [__NR_readv] sys_readv, + [__NR_writev] sys_writev, + [__NR_getsid] sys_getsid, + [__NR_fdatasync] sys_fdatasync, + [__NR__sysctl] sys_ni_syscall, /* sys_sysctl */ + [__NR_mlock] sys_mlock, + [__NR_munlock] sys_munlock, + [__NR_mlockall] sys_mlockall, + [__NR_munlockall] sys_munlockall, + [__NR_sched_setparam] sys_sched_setparam, + [__NR_sched_getparam] sys_sched_getparam, + [__NR_sched_setscheduler] sys_sched_setscheduler, + [__NR_sched_getscheduler] sys_sched_getscheduler, + [__NR_sched_yield] sys_sched_yield, + [__NR_sched_get_priority_max] sys_sched_get_priority_max, + [__NR_sched_get_priority_min] sys_sched_get_priority_min, + [__NR_sched_rr_get_interval] sys_sched_rr_get_interval, + [__NR_nanosleep] sys_nanosleep, + [__NR_mremap] sys_mremap, + [__NR_setresuid] sys_setresuid, + [__NR_getresuid] sys_getresuid, + [__NR_query_module] sys_ni_syscall, + [__NR_poll] sys_poll, + [__NR_nfsservctl] sys_ni_syscall, /* sys_nfsservctl */ + [__NR_setresgid] sys_setresgid, + [__NR_getresgid] sys_getresgid, + [__NR_prctl] sys_prctl, + [__NR_rt_sigreturn] sys_ni_syscall, /* ppc64_rt_sigreturn */ + [__NR_rt_sigaction] sys_ni_syscall, /* sys_rt_sigaction */ + [__NR_rt_sigprocmask] sys_ni_syscall, /* sys_rt_sigprocmask */ + [__NR_rt_sigpending] sys_ni_syscall, /* sys_rt_sigpending */ + [__NR_rt_sigtimedwait] sys_ni_syscall, /* sys_rt_sigtimedwait */ + [__NR_rt_sigqueueinfo] sys_ni_syscall, /* sys_rt_sigqueueinfo */ + [__NR_rt_sigsuspend] sys_ni_syscall, /* sys_rt_sigsuspend */ + [__NR_pread64] sys_pread64, + [__NR_pwrite64] sys_pwrite64, + [__NR_chown] sys_chown, + [__NR_getcwd] sys_getcwd, + [__NR_capget] sys_capget, + [__NR_capset] sys_capset, + [__NR_sigaltstack] sys_ni_syscall, /* sys_sigaltstack */ + [__NR_sendfile] sys_sendfile64, + [__NR_getpmsg] sys_ni_syscall, + [__NR_putpmsg] sys_ni_syscall, + [__NR_vfork] sys_ni_syscall, /* ppc_vfork */ + [__NR_ugetrlimit] sys_getrlimit, + [__NR_readahead] sys_readahead, + [192] sys_ni_syscall, + [193] sys_ni_syscall, + [194] sys_ni_syscall, + [195] sys_ni_syscall, + [196] sys_ni_syscall, + [197] sys_ni_syscall, + [__NR_pciconfig_read] sys_ni_syscall, /* sys_pciconfig_read */ + [__NR_pciconfig_write] sys_ni_syscall, /* sys_pciconfig_write */ + [__NR_pciconfig_iobase] sys_ni_syscall, /* sys_pciconfig_iobase */ + [__NR_multiplexer] sys_ni_syscall, + [__NR_getdents64] sys_getdents64, + [__NR_pivot_root] sys_pivot_root, + [204] sys_ni_syscall, + [__NR_madvise] sys_madvise, + [__NR_mincore] sys_mincore, + [__NR_gettid] sys_gettid, + [__NR_tkill] sys_tkill, + [__NR_setxattr] sys_setxattr, + [__NR_lsetxattr] sys_lsetxattr, + [__NR_fsetxattr] sys_fsetxattr, + [__NR_getxattr] sys_getxattr, + [__NR_lgetxattr] sys_lgetxattr, + [__NR_fgetxattr] sys_fgetxattr, + [__NR_listxattr] sys_listxattr, + [__NR_llistxattr] sys_llistxattr, + [__NR_flistxattr] sys_flistxattr, + [__NR_removexattr] sys_removexattr, + [__NR_lremovexattr] sys_lremovexattr, + [__NR_fremovexattr] sys_fremovexattr, + [__NR_futex] sys_futex, + [__NR_sched_setaffinity] sys_sched_setaffinity, + [__NR_sched_getaffinity] sys_sched_getaffinity, + [__NR_tuxcall] sys_ni_syscall, + [226] sys_ni_syscall, + [__NR_io_setup] sys_io_setup, + [__NR_io_destroy] sys_io_destroy, + [__NR_io_getevents] sys_io_getevents, + [__NR_io_submit] sys_io_submit, + [__NR_io_cancel] sys_io_cancel, + [__NR_set_tid_address] sys_ni_syscall, /* sys_set_tid_address */ + [__NR_fadvise64] sys_fadvise64, + [__NR_exit_group] sys_ni_syscall, /* sys_exit_group */ + [__NR_lookup_dcookie] sys_ni_syscall, /* sys_lookup_dcookie */ + [__NR_epoll_create] sys_epoll_create, + [__NR_epoll_ctl] sys_epoll_ctl, + [__NR_epoll_wait] sys_epoll_wait, + [__NR_remap_file_pages] sys_remap_file_pages, + [__NR_timer_create] sys_timer_create, + [__NR_timer_settime] sys_timer_settime, + [__NR_timer_gettime] sys_timer_gettime, + [__NR_timer_getoverrun] sys_timer_getoverrun, + [__NR_timer_delete] sys_timer_delete, + [__NR_clock_settime] sys_clock_settime, + [__NR_clock_gettime] sys_clock_gettime, + [__NR_clock_getres] sys_clock_getres, + [__NR_clock_nanosleep] sys_clock_nanosleep, + [__NR_swapcontext] sys_ni_syscall, /* ppc64_swapcontext */ + [__NR_tgkill] sys_tgkill, + [__NR_utimes] sys_utimes, + [__NR_statfs64] sys_statfs64, + [__NR_fstatfs64] sys_fstatfs64, + [254] sys_ni_syscall, + [__NR_rtas] ppc_rtas, + [256] sys_ni_syscall, + [257] sys_ni_syscall, + [258] sys_ni_syscall, + [__NR_mbind] sys_ni_syscall, /* sys_mbind */ + [__NR_get_mempolicy] sys_ni_syscall, /* sys_get_mempolicy */ + [__NR_set_mempolicy] sys_ni_syscall, /* sys_set_mempolicy */ + [__NR_mq_open] sys_ni_syscall, /* sys_mq_open */ + [__NR_mq_unlink] sys_ni_syscall, /* sys_mq_unlink */ + [__NR_mq_timedsend] sys_ni_syscall, /* sys_mq_timedsend */ + [__NR_mq_timedreceive] sys_ni_syscall, /* sys_mq_timedreceive */ + [__NR_mq_notify] sys_ni_syscall, /* sys_mq_notify */ + [__NR_mq_getsetattr] sys_ni_syscall, /* sys_mq_getsetattr */ + [__NR_kexec_load] sys_ni_syscall, /* sys_kexec_load */ + [__NR_add_key] sys_ni_syscall, /* sys_add_key */ + [__NR_request_key] sys_ni_syscall, /* sys_request_key */ + [__NR_keyctl] sys_ni_syscall, /* sys_keyctl */ + [__NR_waitid] sys_ni_syscall, /* sys_waitid */ + [__NR_ioprio_set] sys_ni_syscall, /* sys_ioprio_set */ + [__NR_ioprio_get] sys_ni_syscall, /* sys_ioprio_get */ + [__NR_inotify_init] sys_ni_syscall, /* sys_inotify_init */ + [__NR_inotify_add_watch] sys_ni_syscall, /* sys_inotify_add_watch */ + [__NR_inotify_rm_watch] sys_ni_syscall, /* sys_inotify_rm_watch */ + [__NR_spu_run] sys_ni_syscall, /* sys_spu_run */ + [__NR_spu_create] sys_ni_syscall, /* sys_spu_create */ + [__NR_pselect6] sys_ni_syscall, /* sys_pselect */ + [__NR_ppoll] sys_ni_syscall, /* sys_ppoll */ + [__NR_unshare] sys_unshare, +}; + +long spu_sys_callback(struct spu_syscall_block *s) +{ + long (*syscall)(u64 a1, u64 a2, u64 a3, u64 a4, u64 a5, u64 a6); + + BUILD_BUG_ON(ARRAY_SIZE(spu_syscall_table) != __NR_syscalls); + + syscall = spu_syscall_table[s->nr_ret]; + + if (s->nr_ret >= __NR_syscalls) { + pr_debug("%s: invalid syscall #%ld", __FUNCTION__, s->nr_ret); + return -ENOSYS; + } + +#ifdef DEBUG + print_symbol(KERN_DEBUG "SPU-syscall %s:", (unsigned long)syscall); + printk("syscall%ld(%lx, %lx, %lx, %lx, %lx, %lx)\n", + s->nr_ret, + s->parm[0], s->parm[1], s->parm[2], + s->parm[3], s->parm[4], s->parm[5]); +#endif + + return syscall(s->parm[0], s->parm[1], s->parm[2], + s->parm[3], s->parm[4], s->parm[5]); +} +EXPORT_SYMBOL_GPL(spu_sys_callback); diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c index 18ea8866c61..c04e078c0fe 100644 --- a/arch/powerpc/platforms/cell/spufs/run.c +++ b/arch/powerpc/platforms/cell/spufs/run.c @@ -76,6 +76,90 @@ static inline int spu_reacquire_runnable(struct spu_context *ctx, u32 *npc, return 0; } +/* + * SPU syscall restarting is tricky because we violate the basic + * assumption that the signal handler is running on the interrupted + * thread. Here instead, the handler runs on PowerPC user space code, + * while the syscall was called from the SPU. + * This means we can only do a very rough approximation of POSIX + * signal semantics. + */ +int spu_handle_restartsys(struct spu_context *ctx, long *spu_ret, + unsigned int *npc) +{ + int ret; + + switch (*spu_ret) { + case -ERESTARTSYS: + case -ERESTARTNOINTR: + /* + * Enter the regular syscall restarting for + * sys_spu_run, then restart the SPU syscall + * callback. + */ + *npc -= 8; + ret = -ERESTARTSYS; + break; + case -ERESTARTNOHAND: + case -ERESTART_RESTARTBLOCK: + /* + * Restart block is too hard for now, just return -EINTR + * to the SPU. + * ERESTARTNOHAND comes from sys_pause, we also return + * -EINTR from there. + * Assume that we need to be restarted ourselves though. + */ + *spu_ret = -EINTR; + ret = -ERESTARTSYS; + break; + default: + printk(KERN_WARNING "%s: unexpected return code %ld\n", + __FUNCTION__, *spu_ret); + ret = 0; + } + return ret; +} + +int spu_process_callback(struct spu_context *ctx) +{ + struct spu_syscall_block s; + u32 ls_pointer, npc; + char *ls; + long spu_ret; + int ret; + + /* get syscall block from local store */ + npc = ctx->ops->npc_read(ctx); + ls = ctx->ops->get_ls(ctx); + ls_pointer = *(u32*)(ls + npc); + if (ls_pointer > (LS_SIZE - sizeof(s))) + return -EFAULT; + memcpy(&s, ls + ls_pointer, sizeof (s)); + + /* do actual syscall without pinning the spu */ + ret = 0; + spu_ret = -ENOSYS; + npc += 4; + + if (s.nr_ret < __NR_syscalls) { + spu_release(ctx); + /* do actual system call from here */ + spu_ret = spu_sys_callback(&s); + if (spu_ret <= -ERESTARTSYS) { + ret = spu_handle_restartsys(ctx, &spu_ret, &npc); + } + spu_acquire(ctx); + if (ret == -ERESTARTSYS) + return ret; + } + + /* write result, jump over indirect pointer */ + memcpy(ls + ls_pointer, &spu_ret, sizeof (spu_ret)); + ctx->ops->npc_write(ctx, npc); + ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_RUNNABLE); + return ret; +} + static inline int spu_process_events(struct spu_context *ctx) { struct spu *spu = ctx->spu; @@ -107,6 +191,13 @@ long spufs_run_spu(struct file *file, struct spu_context *ctx, ret = spufs_wait(ctx->stop_wq, spu_stopped(ctx, status)); if (unlikely(ret)) break; + if ((*status & SPU_STATUS_STOPPED_BY_STOP) && + (*status >> SPU_STOP_STATUS_SHIFT == 0x2104)) { + ret = spu_process_callback(ctx); + if (ret) + break; + *status &= ~SPU_STATUS_STOPPED_BY_STOP; + } if (unlikely(ctx->state != SPU_STATE_RUNNABLE)) { ret = spu_reacquire_runnable(ctx, npc, status); if (ret) -- cgit v1.2.3-18-g5258 From a33a7d7309d79656bc19a0e96fc4547a1633283e Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 23 Mar 2006 00:00:11 +0100 Subject: [PATCH] spufs: implement mfc access for PPE-side DMA This patch adds a new file called 'mfc' to each spufs directory. The file accepts DMA commands that are a subset of what would be legal DMA commands for problem state register access. Upon reading the file, a bitmask is returned with the completed tag groups set. The file is meant to be used from an abstraction in libspe that is added by a different patch. From the kernel perspective, this means a process can now offload a memory copy from or into an SPE local store without having to run code on the SPE itself. The transfer will only be performed while the SPE is owned by one thread that is waiting in the spu_run system call and the data will be transferred into that thread's address space, independent of which thread started the transfer. Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/spu_base.c | 7 +- arch/powerpc/platforms/cell/spufs/backing_ops.c | 47 ++++ arch/powerpc/platforms/cell/spufs/context.c | 5 +- arch/powerpc/platforms/cell/spufs/file.c | 294 ++++++++++++++++++++++++ arch/powerpc/platforms/cell/spufs/hw_ops.c | 57 +++++ arch/powerpc/platforms/cell/spufs/sched.c | 2 + arch/powerpc/platforms/cell/spufs/spufs.h | 20 ++ arch/powerpc/platforms/cell/spufs/switch.c | 3 +- 8 files changed, 430 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index a8fa1eeeb17..162b6cfa8a4 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -111,7 +111,7 @@ static int __spu_trap_data_seg(struct spu *spu, unsigned long ea) extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap); //XXX static int __spu_trap_data_map(struct spu *spu, unsigned long ea, u64 dsisr) { - pr_debug("%s\n", __FUNCTION__); + pr_debug("%s, %lx, %lx\n", __FUNCTION__, dsisr, ea); /* Handle kernel space hash faults immediately. User hash faults need to be deferred to process context. */ @@ -168,7 +168,7 @@ static int __spu_trap_halt(struct spu *spu) static int __spu_trap_tag_group(struct spu *spu) { pr_debug("%s\n", __FUNCTION__); - /* wake_up(&spu->dma_wq); */ + spu->mfc_callback(spu); return 0; } @@ -242,6 +242,8 @@ spu_irq_class_1(int irq, void *data, struct pt_regs *regs) spu_mfc_dsisr_set(spu, 0ul); spu_int_stat_clear(spu, 1, stat); spin_unlock(&spu->register_lock); + pr_debug("%s: %lx %lx %lx %lx\n", __FUNCTION__, mask, stat, + dar, dsisr); if (stat & 1) /* segment fault */ __spu_trap_data_seg(spu, dar); @@ -632,6 +634,7 @@ static int __init create_spu(struct device_node *spe) spu->ibox_callback = NULL; spu->wbox_callback = NULL; spu->stop_callback = NULL; + spu->mfc_callback = NULL; mutex_lock(&spu_mutex); spu->number = number++; diff --git a/arch/powerpc/platforms/cell/spufs/backing_ops.c b/arch/powerpc/platforms/cell/spufs/backing_ops.c index a5c489a53c6..f1d35ddc9df 100644 --- a/arch/powerpc/platforms/cell/spufs/backing_ops.c +++ b/arch/powerpc/platforms/cell/spufs/backing_ops.c @@ -285,6 +285,49 @@ static void spu_backing_runcntl_stop(struct spu_context *ctx) spu_backing_runcntl_write(ctx, SPU_RUNCNTL_STOP); } +static int spu_backing_set_mfc_query(struct spu_context * ctx, u32 mask, + u32 mode) +{ + struct spu_problem_collapsed *prob = &ctx->csa.prob; + int ret; + + spin_lock(&ctx->csa.register_lock); + ret = -EAGAIN; + if (prob->dma_querytype_RW) + goto out; + ret = 0; + /* FIXME: what are the side-effects of this? */ + prob->dma_querymask_RW = mask; + prob->dma_querytype_RW = mode; +out: + spin_unlock(&ctx->csa.register_lock); + + return ret; +} + +static u32 spu_backing_read_mfc_tagstatus(struct spu_context * ctx) +{ + return ctx->csa.prob.dma_tagstatus_R; +} + +static u32 spu_backing_get_mfc_free_elements(struct spu_context *ctx) +{ + return ctx->csa.prob.dma_qstatus_R; +} + +static int spu_backing_send_mfc_command(struct spu_context *ctx, + struct mfc_dma_command *cmd) +{ + int ret; + + spin_lock(&ctx->csa.register_lock); + ret = -EAGAIN; + /* FIXME: set up priv2->puq */ + spin_unlock(&ctx->csa.register_lock); + + return ret; +} + struct spu_context_ops spu_backing_ops = { .mbox_read = spu_backing_mbox_read, .mbox_stat_read = spu_backing_mbox_stat_read, @@ -305,4 +348,8 @@ struct spu_context_ops spu_backing_ops = { .get_ls = spu_backing_get_ls, .runcntl_write = spu_backing_runcntl_write, .runcntl_stop = spu_backing_runcntl_stop, + .set_mfc_query = spu_backing_set_mfc_query, + .read_mfc_tagstatus = spu_backing_read_mfc_tagstatus, + .get_mfc_free_elements = spu_backing_get_mfc_free_elements, + .send_mfc_command = spu_backing_send_mfc_command, }; diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index 336f238102f..7e016b9eab2 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -47,8 +47,11 @@ struct spu_context *alloc_spu_context(struct address_space *local_store) init_waitqueue_head(&ctx->ibox_wq); init_waitqueue_head(&ctx->wbox_wq); init_waitqueue_head(&ctx->stop_wq); + init_waitqueue_head(&ctx->mfc_wq); ctx->ibox_fasync = NULL; ctx->wbox_fasync = NULL; + ctx->mfc_fasync = NULL; + ctx->tagwait = 0; ctx->state = SPU_STATE_SAVED; ctx->local_store = local_store; ctx->spu = NULL; @@ -68,8 +71,6 @@ void destroy_spu_context(struct kref *kref) ctx = container_of(kref, struct spu_context, kref); down_write(&ctx->state_sema); spu_deactivate(ctx); - ctx->ibox_fasync = NULL; - ctx->wbox_fasync = NULL; up_write(&ctx->state_sema); spu_fini_csa(&ctx->csa); kfree(ctx); diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index dfa649c9b95..62fe9941cce 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -20,6 +20,8 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#undef DEBUG + #include #include #include @@ -641,6 +643,297 @@ static u64 spufs_signal2_type_get(void *data) DEFINE_SIMPLE_ATTRIBUTE(spufs_signal2_type, spufs_signal2_type_get, spufs_signal2_type_set, "%llu"); + +static int spufs_mfc_open(struct inode *inode, struct file *file) +{ + struct spufs_inode_info *i = SPUFS_I(inode); + struct spu_context *ctx = i->i_ctx; + + /* we don't want to deal with DMA into other processes */ + if (ctx->owner != current->mm) + return -EINVAL; + + if (atomic_read(&inode->i_count) != 1) + return -EBUSY; + + file->private_data = ctx; + return nonseekable_open(inode, file); +} + +/* interrupt-level mfc callback function. */ +void spufs_mfc_callback(struct spu *spu) +{ + struct spu_context *ctx = spu->ctx; + + wake_up_all(&ctx->mfc_wq); + + pr_debug("%s %s\n", __FUNCTION__, spu->name); + if (ctx->mfc_fasync) { + u32 free_elements, tagstatus; + unsigned int mask; + + /* no need for spu_acquire in interrupt context */ + free_elements = ctx->ops->get_mfc_free_elements(ctx); + tagstatus = ctx->ops->read_mfc_tagstatus(ctx); + + mask = 0; + if (free_elements & 0xffff) + mask |= POLLOUT; + if (tagstatus & ctx->tagwait) + mask |= POLLIN; + + kill_fasync(&ctx->mfc_fasync, SIGIO, mask); + } +} + +static int spufs_read_mfc_tagstatus(struct spu_context *ctx, u32 *status) +{ + /* See if there is one tag group is complete */ + /* FIXME we need locking around tagwait */ + *status = ctx->ops->read_mfc_tagstatus(ctx) & ctx->tagwait; + ctx->tagwait &= ~*status; + if (*status) + return 1; + + /* enable interrupt waiting for any tag group, + may silently fail if interrupts are already enabled */ + ctx->ops->set_mfc_query(ctx, ctx->tagwait, 1); + return 0; +} + +static ssize_t spufs_mfc_read(struct file *file, char __user *buffer, + size_t size, loff_t *pos) +{ + struct spu_context *ctx = file->private_data; + int ret = -EINVAL; + u32 status; + + if (size != 4) + goto out; + + spu_acquire(ctx); + if (file->f_flags & O_NONBLOCK) { + status = ctx->ops->read_mfc_tagstatus(ctx); + if (!(status & ctx->tagwait)) + ret = -EAGAIN; + else + ctx->tagwait &= ~status; + } else { + ret = spufs_wait(ctx->mfc_wq, + spufs_read_mfc_tagstatus(ctx, &status)); + } + spu_release(ctx); + + if (ret) + goto out; + + ret = 4; + if (copy_to_user(buffer, &status, 4)) + ret = -EFAULT; + +out: + return ret; +} + +static int spufs_check_valid_dma(struct mfc_dma_command *cmd) +{ + pr_debug("queueing DMA %x %lx %x %x %x\n", cmd->lsa, + cmd->ea, cmd->size, cmd->tag, cmd->cmd); + + switch (cmd->cmd) { + case MFC_PUT_CMD: + case MFC_PUTF_CMD: + case MFC_PUTB_CMD: + case MFC_GET_CMD: + case MFC_GETF_CMD: + case MFC_GETB_CMD: + break; + default: + pr_debug("invalid DMA opcode %x\n", cmd->cmd); + return -EIO; + } + + if ((cmd->lsa & 0xf) != (cmd->ea &0xf)) { + pr_debug("invalid DMA alignment, ea %lx lsa %x\n", + cmd->ea, cmd->lsa); + return -EIO; + } + + switch (cmd->size & 0xf) { + case 1: + break; + case 2: + if (cmd->lsa & 1) + goto error; + break; + case 4: + if (cmd->lsa & 3) + goto error; + break; + case 8: + if (cmd->lsa & 7) + goto error; + break; + case 0: + if (cmd->lsa & 15) + goto error; + break; + error: + default: + pr_debug("invalid DMA alignment %x for size %x\n", + cmd->lsa & 0xf, cmd->size); + return -EIO; + } + + if (cmd->size > 16 * 1024) { + pr_debug("invalid DMA size %x\n", cmd->size); + return -EIO; + } + + if (cmd->tag & 0xfff0) { + /* we reserve the higher tag numbers for kernel use */ + pr_debug("invalid DMA tag\n"); + return -EIO; + } + + if (cmd->class) { + /* not supported in this version */ + pr_debug("invalid DMA class\n"); + return -EIO; + } + + return 0; +} + +static int spu_send_mfc_command(struct spu_context *ctx, + struct mfc_dma_command cmd, + int *error) +{ + *error = ctx->ops->send_mfc_command(ctx, &cmd); + if (*error == -EAGAIN) { + /* wait for any tag group to complete + so we have space for the new command */ + ctx->ops->set_mfc_query(ctx, ctx->tagwait, 1); + /* try again, because the queue might be + empty again */ + *error = ctx->ops->send_mfc_command(ctx, &cmd); + if (*error == -EAGAIN) + return 0; + } + return 1; +} + +static ssize_t spufs_mfc_write(struct file *file, const char __user *buffer, + size_t size, loff_t *pos) +{ + struct spu_context *ctx = file->private_data; + struct mfc_dma_command cmd; + int ret = -EINVAL; + + if (size != sizeof cmd) + goto out; + + ret = -EFAULT; + if (copy_from_user(&cmd, buffer, sizeof cmd)) + goto out; + + ret = spufs_check_valid_dma(&cmd); + if (ret) + goto out; + + spu_acquire_runnable(ctx); + if (file->f_flags & O_NONBLOCK) { + ret = ctx->ops->send_mfc_command(ctx, &cmd); + } else { + int status; + ret = spufs_wait(ctx->mfc_wq, + spu_send_mfc_command(ctx, cmd, &status)); + if (status) + ret = status; + } + spu_release(ctx); + + if (ret) + goto out; + + ctx->tagwait |= 1 << cmd.tag; + +out: + return ret; +} + +static unsigned int spufs_mfc_poll(struct file *file,poll_table *wait) +{ + struct spu_context *ctx = file->private_data; + u32 free_elements, tagstatus; + unsigned int mask; + + spu_acquire(ctx); + ctx->ops->set_mfc_query(ctx, ctx->tagwait, 2); + free_elements = ctx->ops->get_mfc_free_elements(ctx); + tagstatus = ctx->ops->read_mfc_tagstatus(ctx); + spu_release(ctx); + + poll_wait(file, &ctx->mfc_wq, wait); + + mask = 0; + if (free_elements & 0xffff) + mask |= POLLOUT | POLLWRNORM; + if (tagstatus & ctx->tagwait) + mask |= POLLIN | POLLRDNORM; + + pr_debug("%s: free %d tagstatus %d tagwait %d\n", __FUNCTION__, + free_elements, tagstatus, ctx->tagwait); + + return mask; +} + +static int spufs_mfc_flush(struct file *file) +{ + struct spu_context *ctx = file->private_data; + int ret; + + spu_acquire(ctx); +#if 0 +/* this currently hangs */ + ret = spufs_wait(ctx->mfc_wq, + ctx->ops->set_mfc_query(ctx, ctx->tagwait, 2)); + if (ret) + goto out; + ret = spufs_wait(ctx->mfc_wq, + ctx->ops->read_mfc_tagstatus(ctx) == ctx->tagwait); +out: +#else + ret = 0; +#endif + spu_release(ctx); + + return ret; +} + +static int spufs_mfc_fsync(struct file *file, struct dentry *dentry, + int datasync) +{ + return spufs_mfc_flush(file); +} + +static int spufs_mfc_fasync(int fd, struct file *file, int on) +{ + struct spu_context *ctx = file->private_data; + + return fasync_helper(fd, file, on, &ctx->mfc_fasync); +} + +static struct file_operations spufs_mfc_fops = { + .open = spufs_mfc_open, + .read = spufs_mfc_read, + .write = spufs_mfc_write, + .poll = spufs_mfc_poll, + .flush = spufs_mfc_flush, + .fsync = spufs_mfc_fsync, + .fasync = spufs_mfc_fasync, +}; + static void spufs_npc_set(void *data, u64 val) { struct spu_context *ctx = data; @@ -783,6 +1076,7 @@ struct tree_descr spufs_dir_contents[] = { { "signal2", &spufs_signal2_fops, 0666, }, { "signal1_type", &spufs_signal1_type, 0666, }, { "signal2_type", &spufs_signal2_type, 0666, }, + { "mfc", &spufs_mfc_fops, 0666, }, { "npc", &spufs_npc_ops, 0666, }, { "fpcr", &spufs_fpcr_fops, 0666, }, { "decr", &spufs_decr_ops, 0666, }, diff --git a/arch/powerpc/platforms/cell/spufs/hw_ops.c b/arch/powerpc/platforms/cell/spufs/hw_ops.c index 5445719bff7..a13a8b5a014 100644 --- a/arch/powerpc/platforms/cell/spufs/hw_ops.c +++ b/arch/powerpc/platforms/cell/spufs/hw_ops.c @@ -232,6 +232,59 @@ static void spu_hw_runcntl_stop(struct spu_context *ctx) spin_unlock_irq(&ctx->spu->register_lock); } +static int spu_hw_set_mfc_query(struct spu_context * ctx, u32 mask, u32 mode) +{ + struct spu_problem *prob = ctx->spu->problem; + int ret; + + spin_lock_irq(&ctx->spu->register_lock); + ret = -EAGAIN; + if (in_be32(&prob->dma_querytype_RW)) + goto out; + ret = 0; + out_be32(&prob->dma_querymask_RW, mask); + out_be32(&prob->dma_querytype_RW, mode); +out: + spin_unlock_irq(&ctx->spu->register_lock); + return ret; +} + +static u32 spu_hw_read_mfc_tagstatus(struct spu_context * ctx) +{ + return in_be32(&ctx->spu->problem->dma_tagstatus_R); +} + +static u32 spu_hw_get_mfc_free_elements(struct spu_context *ctx) +{ + return in_be32(&ctx->spu->problem->dma_qstatus_R); +} + +static int spu_hw_send_mfc_command(struct spu_context *ctx, + struct mfc_dma_command *cmd) +{ + u32 status; + struct spu_problem *prob = ctx->spu->problem; + + spin_lock_irq(&ctx->spu->register_lock); + out_be32(&prob->mfc_lsa_W, cmd->lsa); + out_be64(&prob->mfc_ea_W, cmd->ea); + out_be32(&prob->mfc_union_W.by32.mfc_size_tag32, + cmd->size << 16 | cmd->tag); + out_be32(&prob->mfc_union_W.by32.mfc_class_cmd32, + cmd->class << 16 | cmd->cmd); + status = in_be32(&prob->mfc_union_W.by32.mfc_class_cmd32); + spin_unlock_irq(&ctx->spu->register_lock); + + switch (status & 0xffff) { + case 0: + return 0; + case 2: + return -EAGAIN; + default: + return -EINVAL; + } +} + struct spu_context_ops spu_hw_ops = { .mbox_read = spu_hw_mbox_read, .mbox_stat_read = spu_hw_mbox_stat_read, @@ -252,4 +305,8 @@ struct spu_context_ops spu_hw_ops = { .get_ls = spu_hw_get_ls, .runcntl_write = spu_hw_runcntl_write, .runcntl_stop = spu_hw_runcntl_stop, + .set_mfc_query = spu_hw_set_mfc_query, + .read_mfc_tagstatus = spu_hw_read_mfc_tagstatus, + .get_mfc_free_elements = spu_hw_get_mfc_free_elements, + .send_mfc_command = spu_hw_send_mfc_command, }; diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 963182fbd1a..bf652cd7700 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -180,6 +180,7 @@ static inline void bind_context(struct spu *spu, struct spu_context *ctx) spu->ibox_callback = spufs_ibox_callback; spu->wbox_callback = spufs_wbox_callback; spu->stop_callback = spufs_stop_callback; + spu->mfc_callback = spufs_mfc_callback; mb(); spu_unmap_mappings(ctx); spu_restore(&ctx->csa, spu); @@ -197,6 +198,7 @@ static inline void unbind_context(struct spu *spu, struct spu_context *ctx) spu->ibox_callback = NULL; spu->wbox_callback = NULL; spu->stop_callback = NULL; + spu->mfc_callback = NULL; spu->mm = NULL; spu->pid = 0; spu->prio = MAX_PRIO; diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index db2601f0abd..57d687ca3f0 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -55,13 +55,27 @@ struct spu_context { wait_queue_head_t ibox_wq; wait_queue_head_t wbox_wq; wait_queue_head_t stop_wq; + wait_queue_head_t mfc_wq; struct fasync_struct *ibox_fasync; struct fasync_struct *wbox_fasync; + struct fasync_struct *mfc_fasync; + u32 tagwait; struct spu_context_ops *ops; struct work_struct reap_work; u64 flags; }; +struct mfc_dma_command { + int32_t pad; /* reserved */ + uint32_t lsa; /* local storage address */ + uint64_t ea; /* effective address */ + uint16_t size; /* transfer size */ + uint16_t tag; /* command tag */ + uint16_t class; /* class ID */ + uint16_t cmd; /* command opcode */ +}; + + /* SPU context query/set operations. */ struct spu_context_ops { int (*mbox_read) (struct spu_context * ctx, u32 * data); @@ -84,6 +98,11 @@ struct spu_context_ops { char*(*get_ls) (struct spu_context * ctx); void (*runcntl_write) (struct spu_context * ctx, u32 data); void (*runcntl_stop) (struct spu_context * ctx); + int (*set_mfc_query)(struct spu_context * ctx, u32 mask, u32 mode); + u32 (*read_mfc_tagstatus)(struct spu_context * ctx); + u32 (*get_mfc_free_elements)(struct spu_context *ctx); + int (*send_mfc_command)(struct spu_context *ctx, + struct mfc_dma_command *cmd); }; extern struct spu_context_ops spu_hw_ops; @@ -159,5 +178,6 @@ size_t spu_ibox_read(struct spu_context *ctx, u32 *data); void spufs_ibox_callback(struct spu *spu); void spufs_wbox_callback(struct spu *spu); void spufs_stop_callback(struct spu *spu); +void spufs_mfc_callback(struct spu *spu); #endif diff --git a/arch/powerpc/platforms/cell/spufs/switch.c b/arch/powerpc/platforms/cell/spufs/switch.c index 212db28531f..97898d5d34e 100644 --- a/arch/powerpc/platforms/cell/spufs/switch.c +++ b/arch/powerpc/platforms/cell/spufs/switch.c @@ -2145,7 +2145,8 @@ static void init_priv1(struct spu_state *csa) csa->priv1.int_mask_class1_RW = CLASS1_ENABLE_SEGMENT_FAULT_INTR | CLASS1_ENABLE_STORAGE_FAULT_INTR; csa->priv1.int_mask_class2_RW = CLASS2_ENABLE_SPU_STOP_INTR | - CLASS2_ENABLE_SPU_HALT_INTR; + CLASS2_ENABLE_SPU_HALT_INTR | + CLASS2_ENABLE_SPU_DMA_TAG_GROUP_COMPLETE_INTR; } static void init_priv2(struct spu_state *csa) -- cgit v1.2.3-18-g5258 From 6df10a82f8de89c66eb91c371d62d76e87b2cbba Mon Sep 17 00:00:00 2001 From: Mark Nutter Date: Thu, 23 Mar 2006 00:00:12 +0100 Subject: [PATCH] spufs: enable SPE problem state MMIO access. This patch is layered on top of CONFIG_SPARSEMEM and is patterned after direct mapping of LS. This patch allows mmap() of the following regions: "mfc", which represents the area from [0x3000 - 0x3fff]; "cntl", which represents the area from [0x4000 - 0x4fff]; "signal1" which begins at offset 0x14000; "signal2" which begins at offset 0x1c000. The signal1 & signal2 files may be mmap()'d by regular user processes. The cntl and mfc file, on the other hand, may only be accessed if the owning process has CAP_SYS_RAWIO, because they have the potential to confuse the kernel with regard to parallel access to the same files with regular file operations: the kernel always holds a spinlock when accessing registers in these areas to serialize them, which can not be guaranteed with user mmaps, Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/Kconfig | 5 + arch/powerpc/platforms/cell/spu_base.c | 5 + arch/powerpc/platforms/cell/spufs/context.c | 18 ++- arch/powerpc/platforms/cell/spufs/file.c | 229 +++++++++++++++++++++++++++- arch/powerpc/platforms/cell/spufs/inode.c | 2 +- arch/powerpc/platforms/cell/spufs/spufs.h | 8 +- 6 files changed, 255 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig index 3157071e241..c2a3db8edb0 100644 --- a/arch/powerpc/platforms/cell/Kconfig +++ b/arch/powerpc/platforms/cell/Kconfig @@ -10,4 +10,9 @@ config SPU_FS Units on machines implementing the Broadband Processor Architecture. +config SPUFS_MMAP + bool + depends on SPU_FS && SPARSEMEM && !PPC_64K_PAGES + default y + endmenu diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index 162b6cfa8a4..d152a3fbdb8 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -570,6 +570,11 @@ static int __init spu_map_device(struct spu *spu, struct device_node *spe) if (!spu->local_store) goto out; + prop = get_property(spe, "problem", NULL); + if (!prop) + goto out_unmap; + spu->problem_phys = *(unsigned long *)prop; + spu->problem= map_spe_prop(spe, "problem"); if (!spu->problem) goto out_unmap; diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index 7e016b9eab2..3f75c1e7ade 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -27,7 +27,7 @@ #include #include "spufs.h" -struct spu_context *alloc_spu_context(struct address_space *local_store) +struct spu_context *alloc_spu_context(void) { struct spu_context *ctx; ctx = kmalloc(sizeof *ctx, GFP_KERNEL); @@ -53,7 +53,10 @@ struct spu_context *alloc_spu_context(struct address_space *local_store) ctx->mfc_fasync = NULL; ctx->tagwait = 0; ctx->state = SPU_STATE_SAVED; - ctx->local_store = local_store; + ctx->local_store = NULL; + ctx->cntl = NULL; + ctx->signal1 = NULL; + ctx->signal2 = NULL; ctx->spu = NULL; ctx->ops = &spu_backing_ops; ctx->owner = get_task_mm(current); @@ -110,7 +113,16 @@ void spu_release(struct spu_context *ctx) void spu_unmap_mappings(struct spu_context *ctx) { - unmap_mapping_range(ctx->local_store, 0, LS_SIZE, 1); + if (ctx->local_store) + unmap_mapping_range(ctx->local_store, 0, LS_SIZE, 1); + if (ctx->mfc) + unmap_mapping_range(ctx->mfc, 0, 0x4000, 1); + if (ctx->cntl) + unmap_mapping_range(ctx->cntl, 0, 0x4000, 1); + if (ctx->signal1) + unmap_mapping_range(ctx->signal1, 0, 0x4000, 1); + if (ctx->signal2) + unmap_mapping_range(ctx->signal2, 0, 0x4000, 1); } int spu_acquire_runnable(struct spu_context *ctx) diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index 62fe9941cce..366185e9266 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -41,8 +41,10 @@ static int spufs_mem_open(struct inode *inode, struct file *file) { struct spufs_inode_info *i = SPUFS_I(inode); - file->private_data = i->i_ctx; - file->f_mapping = i->i_ctx->local_store; + struct spu_context *ctx = i->i_ctx; + file->private_data = ctx; + file->f_mapping = inode->i_mapping; + ctx->local_store = inode->i_mapping; return 0; } @@ -86,7 +88,7 @@ spufs_mem_write(struct file *file, const char __user *buffer, return ret; } -#ifdef CONFIG_SPARSEMEM +#ifdef CONFIG_SPUFS_MMAP static struct page * spufs_mem_mmap_nopage(struct vm_area_struct *vma, unsigned long address, int *type) @@ -138,11 +140,113 @@ static struct file_operations spufs_mem_fops = { .read = spufs_mem_read, .write = spufs_mem_write, .llseek = generic_file_llseek, -#ifdef CONFIG_SPARSEMEM +#ifdef CONFIG_SPUFS_MMAP .mmap = spufs_mem_mmap, #endif }; +#ifdef CONFIG_SPUFS_MMAP +static struct page *spufs_ps_nopage(struct vm_area_struct *vma, + unsigned long address, + int *type, unsigned long ps_offs) +{ + struct page *page = NOPAGE_SIGBUS; + int fault_type = VM_FAULT_SIGBUS; + struct spu_context *ctx = vma->vm_file->private_data; + unsigned long offset = address - vma->vm_start; + unsigned long area; + int ret; + + offset += vma->vm_pgoff << PAGE_SHIFT; + if (offset >= 0x4000) + goto out; + + ret = spu_acquire_runnable(ctx); + if (ret) + goto out; + + area = ctx->spu->problem_phys + ps_offs; + page = pfn_to_page((area + offset) >> PAGE_SHIFT); + fault_type = VM_FAULT_MINOR; + page_cache_get(page); + + spu_release(ctx); + + out: + if (type) + *type = fault_type; + + return page; +} + +static struct page *spufs_cntl_mmap_nopage(struct vm_area_struct *vma, + unsigned long address, int *type) +{ + return spufs_ps_nopage(vma, address, type, 0x4000); +} + +static struct vm_operations_struct spufs_cntl_mmap_vmops = { + .nopage = spufs_cntl_mmap_nopage, +}; + +/* + * mmap support for problem state control area [0x4000 - 0x4fff]. + * Mapping this area requires that the application have CAP_SYS_RAWIO, + * as these registers require special care when read/writing. + */ +static int spufs_cntl_mmap(struct file *file, struct vm_area_struct *vma) +{ + if (!(vma->vm_flags & VM_SHARED)) + return -EINVAL; + + if (!capable(CAP_SYS_RAWIO)) + return -EPERM; + + vma->vm_flags |= VM_RESERVED; + vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) + | _PAGE_NO_CACHE); + + vma->vm_ops = &spufs_cntl_mmap_vmops; + return 0; +} +#endif + +static int spufs_cntl_open(struct inode *inode, struct file *file) +{ + struct spufs_inode_info *i = SPUFS_I(inode); + struct spu_context *ctx = i->i_ctx; + + file->private_data = ctx; + file->f_mapping = inode->i_mapping; + ctx->cntl = inode->i_mapping; + return 0; +} + +static ssize_t +spufs_cntl_read(struct file *file, char __user *buffer, + size_t size, loff_t *pos) +{ + /* FIXME: read from spu status */ + return -EINVAL; +} + +static ssize_t +spufs_cntl_write(struct file *file, const char __user *buffer, + size_t size, loff_t *pos) +{ + /* FIXME: write to runctl bit */ + return -EINVAL; +} + +static struct file_operations spufs_cntl_fops = { + .open = spufs_cntl_open, + .read = spufs_cntl_read, + .write = spufs_cntl_write, +#ifdef CONFIG_SPUFS_MMAP + .mmap = spufs_cntl_mmap, +#endif +}; + static int spufs_regs_open(struct inode *inode, struct file *file) { @@ -503,6 +607,16 @@ static struct file_operations spufs_wbox_stat_fops = { .read = spufs_wbox_stat_read, }; +static int spufs_signal1_open(struct inode *inode, struct file *file) +{ + struct spufs_inode_info *i = SPUFS_I(inode); + struct spu_context *ctx = i->i_ctx; + file->private_data = ctx; + file->f_mapping = inode->i_mapping; + ctx->signal1 = inode->i_mapping; + return nonseekable_open(inode, file); +} + static ssize_t spufs_signal1_read(struct file *file, char __user *buf, size_t len, loff_t *pos) { @@ -543,12 +657,50 @@ static ssize_t spufs_signal1_write(struct file *file, const char __user *buf, return 4; } +#ifdef CONFIG_SPUFS_MMAP +static struct page *spufs_signal1_mmap_nopage(struct vm_area_struct *vma, + unsigned long address, int *type) +{ + return spufs_ps_nopage(vma, address, type, 0x14000); +} + +static struct vm_operations_struct spufs_signal1_mmap_vmops = { + .nopage = spufs_signal1_mmap_nopage, +}; + +static int spufs_signal1_mmap(struct file *file, struct vm_area_struct *vma) +{ + if (!(vma->vm_flags & VM_SHARED)) + return -EINVAL; + + vma->vm_flags |= VM_RESERVED; + vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) + | _PAGE_NO_CACHE); + + vma->vm_ops = &spufs_signal1_mmap_vmops; + return 0; +} +#endif + static struct file_operations spufs_signal1_fops = { - .open = spufs_pipe_open, + .open = spufs_signal1_open, .read = spufs_signal1_read, .write = spufs_signal1_write, +#ifdef CONFIG_SPUFS_MMAP + .mmap = spufs_signal1_mmap, +#endif }; +static int spufs_signal2_open(struct inode *inode, struct file *file) +{ + struct spufs_inode_info *i = SPUFS_I(inode); + struct spu_context *ctx = i->i_ctx; + file->private_data = ctx; + file->f_mapping = inode->i_mapping; + ctx->signal2 = inode->i_mapping; + return nonseekable_open(inode, file); +} + static ssize_t spufs_signal2_read(struct file *file, char __user *buf, size_t len, loff_t *pos) { @@ -591,10 +743,39 @@ static ssize_t spufs_signal2_write(struct file *file, const char __user *buf, return 4; } +#ifdef CONFIG_SPUFS_MMAP +static struct page *spufs_signal2_mmap_nopage(struct vm_area_struct *vma, + unsigned long address, int *type) +{ + return spufs_ps_nopage(vma, address, type, 0x1c000); +} + +static struct vm_operations_struct spufs_signal2_mmap_vmops = { + .nopage = spufs_signal2_mmap_nopage, +}; + +static int spufs_signal2_mmap(struct file *file, struct vm_area_struct *vma) +{ + if (!(vma->vm_flags & VM_SHARED)) + return -EINVAL; + + /* FIXME: */ + vma->vm_flags |= VM_RESERVED; + vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) + | _PAGE_NO_CACHE); + + vma->vm_ops = &spufs_signal2_mmap_vmops; + return 0; +} +#endif + static struct file_operations spufs_signal2_fops = { - .open = spufs_pipe_open, + .open = spufs_signal2_open, .read = spufs_signal2_read, .write = spufs_signal2_write, +#ifdef CONFIG_SPUFS_MMAP + .mmap = spufs_signal2_mmap, +#endif }; static void spufs_signal1_type_set(void *data, u64 val) @@ -643,6 +824,38 @@ static u64 spufs_signal2_type_get(void *data) DEFINE_SIMPLE_ATTRIBUTE(spufs_signal2_type, spufs_signal2_type_get, spufs_signal2_type_set, "%llu"); +#ifdef CONFIG_SPUFS_MMAP +static struct page *spufs_mfc_mmap_nopage(struct vm_area_struct *vma, + unsigned long address, int *type) +{ + return spufs_ps_nopage(vma, address, type, 0x3000); +} + +static struct vm_operations_struct spufs_mfc_mmap_vmops = { + .nopage = spufs_mfc_mmap_nopage, +}; + +/* + * mmap support for problem state MFC DMA area [0x0000 - 0x0fff]. + * Mapping this area requires that the application have CAP_SYS_RAWIO, + * as these registers require special care when read/writing. + */ +static int spufs_mfc_mmap(struct file *file, struct vm_area_struct *vma) +{ + if (!(vma->vm_flags & VM_SHARED)) + return -EINVAL; + + if (!capable(CAP_SYS_RAWIO)) + return -EPERM; + + vma->vm_flags |= VM_RESERVED; + vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) + | _PAGE_NO_CACHE); + + vma->vm_ops = &spufs_mfc_mmap_vmops; + return 0; +} +#endif static int spufs_mfc_open(struct inode *inode, struct file *file) { @@ -932,6 +1145,9 @@ static struct file_operations spufs_mfc_fops = { .flush = spufs_mfc_flush, .fsync = spufs_mfc_fsync, .fasync = spufs_mfc_fasync, +#ifdef CONFIG_SPUFS_MMAP + .mmap = spufs_mfc_mmap, +#endif }; static void spufs_npc_set(void *data, u64 val) @@ -1077,6 +1293,7 @@ struct tree_descr spufs_dir_contents[] = { { "signal1_type", &spufs_signal1_type, 0666, }, { "signal2_type", &spufs_signal2_type, 0666, }, { "mfc", &spufs_mfc_fops, 0666, }, + { "cntl", &spufs_cntl_fops, 0666, }, { "npc", &spufs_npc_ops, 0666, }, { "fpcr", &spufs_fpcr_fops, 0666, }, { "decr", &spufs_decr_ops, 0666, }, diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c index b3962c3a034..dc06305eecf 100644 --- a/arch/powerpc/platforms/cell/spufs/inode.c +++ b/arch/powerpc/platforms/cell/spufs/inode.c @@ -241,7 +241,7 @@ spufs_mkdir(struct inode *dir, struct dentry *dentry, int mode) inode->i_gid = dir->i_gid; inode->i_mode &= S_ISGID; } - ctx = alloc_spu_context(inode->i_mapping); + ctx = alloc_spu_context(); SPUFS_I(inode)->i_ctx = ctx; if (!ctx) goto out_iput; diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index 57d687ca3f0..4485738e210 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -43,7 +43,11 @@ struct spu_context { struct spu *spu; /* pointer to a physical SPU */ struct spu_state csa; /* SPU context save area. */ spinlock_t mmio_lock; /* protects mmio access */ - struct address_space *local_store;/* local store backing store */ + struct address_space *local_store; /* local store mapping. */ + struct address_space *mfc; /* 'mfc' area mappings. */ + struct address_space *cntl; /* 'control' area mappings. */ + struct address_space *signal1; /* 'signal1' area mappings. */ + struct address_space *signal2; /* 'signal2' area mappings. */ enum { SPU_STATE_RUNNABLE, SPU_STATE_SAVED } state; struct rw_semaphore state_sema; @@ -125,7 +129,7 @@ long spufs_create_thread(struct nameidata *nd, extern struct file_operations spufs_context_fops; /* context management */ -struct spu_context * alloc_spu_context(struct address_space *local_store); +struct spu_context * alloc_spu_context(void); void destroy_spu_context(struct kref *kref); struct spu_context * get_spu_context(struct spu_context *ctx); int put_spu_context(struct spu_context *ctx); -- cgit v1.2.3-18-g5258 From ca3e91cb0cd53da70621f85d24a080b23751a013 Mon Sep 17 00:00:00 2001 From: Dirk Herrendoerfer Date: Thu, 23 Mar 2006 00:00:13 +0100 Subject: [PATCH] spufs: initialize context correctly the mfc member of a new context was not initialized to zero, which potentially leads to wild memory accesses. Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/spufs/context.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index 3f75c1e7ade..8bb33abfad1 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -51,6 +51,7 @@ struct spu_context *alloc_spu_context(void) ctx->ibox_fasync = NULL; ctx->wbox_fasync = NULL; ctx->mfc_fasync = NULL; + ctx->mfc = NULL; ctx->tagwait = 0; ctx->state = SPU_STATE_SAVED; ctx->local_store = NULL; -- cgit v1.2.3-18-g5258 From 6088857b169c64e6e9672a2a66e76db3e957d5db Mon Sep 17 00:00:00 2001 From: Olaf Hering Date: Thu, 23 Mar 2006 21:50:59 +0100 Subject: [PATCH] correct the comment about stackpointer alignment in __boot_from_prom The address of variable val in prom_init_stdout is passed to prom_getprop. prom_getprop casts the pointer to u32 and passes it to call_prom in the hope that OpenFirmware stores something there. But the pointer is truncated in the lower bits and the expected value is stored somewhere else. In my testing I had a stackpointer of 0x0023e6b4. val was at offset 120, wich has address 0x0023e72c. But the value passed to OF was 0x0023e728. c00000000040b710: 3b 01 00 78 addi r24,r1,120 ... c00000000040b754: 57 08 00 38 rlwinm r8,r24,0,0,28 ... c00000000040b784: 80 01 00 78 lwz r0,120(r1) ... c00000000040b798: 90 1b 00 0c stw r0,12(r27) ... The stackpointer came from 32bit code. The chain was yaboot -> zImage -> vmlinux PowerMac OpenFirmware does appearently not handle the ELF sections correctly. If yaboot was compiled in /usr/src/packages/BUILD/lilo-10.1.1/yaboot, then the stackpointer is unaligned. But the stackpointer is correct if yaboot is compiled in /tmp/yaboot. This bug triggered since 2.6.15, now prom_getprop is an inline function. gcc clears the lower bits, instead of just clearing the upper 32 bits. Signed-off-by: Olaf Hering Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/head_64.S | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 35084f3a841..7e7f7d24330 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -1544,7 +1544,11 @@ _STATIC(__boot_from_prom) mr r28,r6 mr r27,r7 - /* Align the stack to 16-byte boundary for broken yaboot */ + /* + * Align the stack to 16-byte boundary + * Depending on the size and layout of the ELF sections in the initial + * boot binary, the stack pointer will be unalignet on PowerMac + */ rldicr r1,r1,0,59 /* Make sure we are running in 64 bits mode */ -- cgit v1.2.3-18-g5258 From 069007ae07ab9286fbe42e9a66b78e184f752a05 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Fri, 24 Mar 2006 02:34:46 -0800 Subject: [PATCH] powerpc: hot_add_scn_to_nid() build fix The return statement is to prevent `warning: 'nid' might be used uninitialized in this function'. Cc: Nathan Lynch Signed-off-by: Andrew Morton Signed-off-by: Paul Mackerras --- arch/powerpc/mm/numa.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index e89b22aa539..0a335f34974 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -756,6 +756,7 @@ int hot_add_scn_to_nid(unsigned long scn_addr) struct device_node *memory = NULL; nodemask_t nodes; int default_nid = any_online_node(NODE_MASK_ALL); + int nid; if (!numa_enabled || (min_common_depth < 0)) return default_nid; @@ -790,6 +791,7 @@ ha_new_range: goto ha_new_range; } BUG(); /* section address should be found above */ + return 0; /* Temporary code to ensure that returned node is not empty */ got_nid: -- cgit v1.2.3-18-g5258 From add60ef303809087999412209d24d400a1c96670 Mon Sep 17 00:00:00 2001 From: Olaf Hering Date: Thu, 23 Mar 2006 22:03:57 +0100 Subject: [PATCH] powerpc: return to OF via trap, not exit Do not call prom exit prom_panic. It clears the screen and the exit message is lost. On some (or all?) pmacs it causes another crash when OF tries to print the date and time in its banner. Set of_platform earlier to catch more prom_panic() calls. Signed-off-by: Olaf Hering Acked-by: Segher Boessenkool Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/prom_init.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 813c2cd194c..0d088784450 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -397,6 +397,11 @@ static void __init __attribute__((noreturn)) prom_panic(const char *reason) reason = PTRRELOC(reason); #endif prom_print(reason); + /* Do not call exit because it clears the screen on pmac + * it also causes some sort of double-fault on early pmacs */ + if (RELOC(of_platform) == PLATFORM_POWERMAC) + asm("trap\n"); + /* ToDo: should put up an SRC here on p/iSeries */ call_prom("exit", 0, 0); @@ -2060,15 +2065,6 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, */ prom_init_stdout(); - /* Bail if this is a kdump kernel. */ - if (PHYSICAL_START > 0) - prom_panic("Error: You can't boot a kdump kernel from OF!\n"); - - /* - * Check for an initrd - */ - prom_check_initrd(r3, r4); - /* * Get default machine type. At this point, we do not differentiate * between pSeries SMP and pSeries LPAR @@ -2078,6 +2074,15 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, prom_setprop(_prom->chosen, "/chosen", "linux,platform", &getprop_rval, sizeof(getprop_rval)); + /* Bail if this is a kdump kernel. */ + if (PHYSICAL_START > 0) + prom_panic("Error: You can't boot a kdump kernel from OF!\n"); + + /* + * Check for an initrd + */ + prom_check_initrd(r3, r4); + #ifdef CONFIG_PPC_PSERIES /* * On pSeries, inform the firmware about our capabilities -- cgit v1.2.3-18-g5258 From 16cc11daff0230bcd1ae7327c1c256c0aa02cad6 Mon Sep 17 00:00:00 2001 From: John Rose Date: Fri, 24 Mar 2006 11:25:32 -0600 Subject: [PATCH] powerpc: dynamic probe - use ppc_md.pci_probe_mode() Change the dynamic PCI probe function for pSeries to use ppc_md.pci_probe_mode() when appropriate. Signed-off-by: John Rose Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/pci_dlpar.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c index 44abdeb9ca0..b3c2dcb1e4f 100644 --- a/arch/powerpc/platforms/pseries/pci_dlpar.c +++ b/arch/powerpc/platforms/pseries/pci_dlpar.c @@ -152,20 +152,24 @@ pcibios_pci_config_bridge(struct pci_dev *dev) void pcibios_add_pci_devices(struct pci_bus * bus) { - int slotno, num; + int slotno, num, mode; struct pci_dev *dev; struct device_node *dn = pci_bus_to_OF_node(bus); eeh_add_device_tree_early(dn); - if (_machine == PLATFORM_PSERIES_LPAR) { + mode = PCI_PROBE_NORMAL; + if (ppc_md.pci_probe_mode) + mode = ppc_md.pci_probe_mode(bus); + + if (mode == PCI_PROBE_DEVTREE) { /* use ofdt-based probe */ of_scan_bus(dn, bus); if (!list_empty(&bus->devices)) { pcibios_fixup_new_pci_devices(bus, 0); pci_bus_add_devices(bus); } - } else { + } else if (mode == PCI_PROBE_NORMAL) { /* use legacy probe */ slotno = PCI_SLOT(PCI_DN(dn->child)->devfn); num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0)); -- cgit v1.2.3-18-g5258 From 2fa68747dad290f4415e2ea8565d57876747b2d3 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 24 Mar 2006 19:46:29 +0100 Subject: [PATCH] powerpc: fix spider-pic affinity setting As noticed by Milton Miller, setting the initial affinity in spider-pic can go wrong if the target node field was not orinally empty. Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/spider-pic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c index 0e9bb0b72c5..9647a8dad4f 100644 --- a/arch/powerpc/platforms/cell/spider-pic.c +++ b/arch/powerpc/platforms/cell/spider-pic.c @@ -88,7 +88,7 @@ static void spider_enable_irq(unsigned int irq) void __iomem *cfg = spider_get_irq_config(irq); irq = spider_get_nr(irq); - out_be32(cfg, in_be32(cfg) | 0x3107000eu | nodeid); + out_be32(cfg, (in_be32(cfg) & ~0xf0)| 0x3107000eu | nodeid); out_be32(cfg + 4, in_be32(cfg + 4) | 0x00020000u | irq); } -- cgit v1.2.3-18-g5258 From 47952d5ea67dc7098667a954483a82acf81eb4da Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 24 Mar 2006 19:47:52 +0100 Subject: [PATCH] powerpc: use guarded ioremap for cell on-chip mappings I'm not sure where the information came from, but I assumed that doing cache-inhibited mappings for mmio regions was sufficient. It seems we also need the guarded bit set, like everyone else, which is the default for ioremap. Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/interrupt.c | 10 +++------- arch/powerpc/platforms/cell/iommu.c | 12 ++++++------ arch/powerpc/platforms/cell/pervasive.c | 2 +- arch/powerpc/platforms/cell/spider-pic.c | 4 ++-- 4 files changed, 12 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c index e3fffdfcc67..ae62f5d5c31 100644 --- a/arch/powerpc/platforms/cell/interrupt.c +++ b/arch/powerpc/platforms/cell/interrupt.c @@ -226,9 +226,7 @@ static int setup_iic_hardcoded(void) regs += 0x20; printk(KERN_INFO "IIC for CPU %d at %lx\n", cpu, regs); - iic->regs = __ioremap(regs, sizeof(struct iic_regs), - _PAGE_NO_CACHE); - + iic->regs = ioremap(regs, sizeof(struct iic_regs)); iic->target_id = (nodeid << 4) + ((cpu & 1) ? 0xf : 0xe); } @@ -269,14 +267,12 @@ static int setup_iic(void) } iic = &per_cpu(iic, np[0]); - iic->regs = __ioremap(regs[0], sizeof(struct iic_regs), - _PAGE_NO_CACHE); + iic->regs = ioremap(regs[0], sizeof(struct iic_regs)); iic->target_id = ((np[0] & 2) << 3) + ((np[0] & 1) ? 0xf : 0xe); printk("IIC for CPU %d at %lx mapped to %p\n", np[0], regs[0], iic->regs); iic = &per_cpu(iic, np[1]); - iic->regs = __ioremap(regs[2], sizeof(struct iic_regs), - _PAGE_NO_CACHE); + iic->regs = ioremap(regs[2], sizeof(struct iic_regs)); iic->target_id = ((np[1] & 2) << 3) + ((np[1] & 1) ? 0xf : 0xe); printk("IIC for CPU %d at %lx mapped to %p\n", np[1], regs[2], iic->regs); diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index c8a98be8b6a..a49ceb799a8 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -344,8 +344,8 @@ static int cell_map_iommu_hardcoded(int num_nodes) /* node 0 */ iommu = &cell_iommus[0]; - iommu->mapped_base = __ioremap(0x20000511000, 0x1000, _PAGE_NO_CACHE); - iommu->mapped_mmio_base = __ioremap(0x20000510000, 0x1000, _PAGE_NO_CACHE); + iommu->mapped_base = ioremap(0x20000511000, 0x1000); + iommu->mapped_mmio_base = ioremap(0x20000510000, 0x1000); enable_mapping(iommu->mapped_base, iommu->mapped_mmio_base); @@ -357,8 +357,8 @@ static int cell_map_iommu_hardcoded(int num_nodes) /* node 1 */ iommu = &cell_iommus[1]; - iommu->mapped_base = __ioremap(0x30000511000, 0x1000, _PAGE_NO_CACHE); - iommu->mapped_mmio_base = __ioremap(0x30000510000, 0x1000, _PAGE_NO_CACHE); + iommu->mapped_base = ioremap(0x30000511000, 0x1000); + iommu->mapped_mmio_base = ioremap(0x30000510000, 0x1000); enable_mapping(iommu->mapped_base, iommu->mapped_mmio_base); @@ -407,8 +407,8 @@ static int cell_map_iommu(void) iommu->base = *base; iommu->mmio_base = *mmio_base; - iommu->mapped_base = __ioremap(*base, 0x1000, _PAGE_NO_CACHE); - iommu->mapped_mmio_base = __ioremap(*mmio_base, 0x1000, _PAGE_NO_CACHE); + iommu->mapped_base = ioremap(*base, 0x1000); + iommu->mapped_mmio_base = ioremap(*mmio_base, 0x1000); enable_mapping(iommu->mapped_base, iommu->mapped_mmio_base); diff --git a/arch/powerpc/platforms/cell/pervasive.c b/arch/powerpc/platforms/cell/pervasive.c index e0e051c675d..58baeb52f6f 100644 --- a/arch/powerpc/platforms/cell/pervasive.c +++ b/arch/powerpc/platforms/cell/pervasive.c @@ -203,7 +203,7 @@ found: pr_debug("pervasive area for CPU %d at %lx, size %x\n", cpu, real_address, size); - p->regs = __ioremap(real_address, size, _PAGE_NO_CACHE); + p->regs = ioremap(real_address, size); p->thread = thread; return 0; } diff --git a/arch/powerpc/platforms/cell/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c index 9647a8dad4f..55cbdd77a62 100644 --- a/arch/powerpc/platforms/cell/spider-pic.c +++ b/arch/powerpc/platforms/cell/spider-pic.c @@ -159,7 +159,7 @@ void spider_init_IRQ_hardcoded(void) for (node = 0; node < num_present_cpus()/2; node++) { spiderpic = pics[node]; printk(KERN_DEBUG "SPIDER addr: %lx\n", spiderpic); - spider_pics[node] = __ioremap(spiderpic, 0x800, _PAGE_NO_CACHE); + spider_pics[node] = ioremap(spiderpic, 0x800); for (n = 0; n < IIC_NUM_EXT; n++) { int irq = n + IIC_EXT_OFFSET + node * IIC_NODE_STRIDE; get_irq_desc(irq)->handler = &spider_pic; @@ -210,7 +210,7 @@ void spider_init_IRQ(void) if ( n != 2) printk("reg property with invalid number of elements \n"); - spider_pics[node] = __ioremap(spider_reg, 0x800, _PAGE_NO_CACHE); + spider_pics[node] = ioremap(spider_reg, 0x800); printk("SPIDER addr: %lx with %i addr_cells mapped to %p\n", spider_reg, n, spider_pics[node]); -- cgit v1.2.3-18-g5258 From 79c227a92ce9fe0504e9c4aaadf3bfacb0f5f45e Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 24 Mar 2006 19:49:27 +0100 Subject: [PATCH] spufs: Fix endless protection fault on LS writes by SPE. If an SPE attempts a DMA put to a local store after already doing a get, the kernel must update the HW PTE to allow the write access. This case was not being handled correctly. From: Mike Kistler Signed-off-by: Mike Kistler Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/spu_base.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index d152a3fbdb8..269dda4fd0b 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -486,14 +486,13 @@ int spu_irq_class_1_bottom(struct spu *spu) ea = spu->dar; dsisr = spu->dsisr; - if (dsisr & MFC_DSISR_PTE_NOT_FOUND) { + if (dsisr & (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED)) { access = (_PAGE_PRESENT | _PAGE_USER); access |= (dsisr & MFC_DSISR_ACCESS_PUT) ? _PAGE_RW : 0UL; if (hash_page(ea, access, 0x300) != 0) error |= CLASS1_ENABLE_STORAGE_FAULT_INTR; } - if ((error & CLASS1_ENABLE_STORAGE_FAULT_INTR) || - (dsisr & MFC_DSISR_ACCESS_DENIED)) { + if (error & CLASS1_ENABLE_STORAGE_FAULT_INTR) { if ((ret = spu_handle_mm_fault(spu)) != 0) error |= CLASS1_ENABLE_STORAGE_FAULT_INTR; else -- cgit v1.2.3-18-g5258 From b4f382a3e5e20ba867e7aa5b01189a3fd40eea2c Mon Sep 17 00:00:00 2001 From: Linas Vepstas Date: Fri, 24 Mar 2006 17:11:29 -0600 Subject: [PATCH] powerpc/pseries: Cleanup device name printing. This avoids printk'ing a NULL string. Signed-off-by: Linas Vepstas Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/eeh_driver.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c index b811d5ff92f..cc2495a0cdd 100644 --- a/arch/powerpc/platforms/pseries/eeh_driver.c +++ b/arch/powerpc/platforms/pseries/eeh_driver.c @@ -257,6 +257,7 @@ void handle_eeh_events (struct eeh_event *event) struct pci_bus *frozen_bus; int rc = 0; enum pci_ers_result result = PCI_ERS_RESULT_NONE; + const char *pci_str, *drv_str; frozen_dn = find_device_pe(event->dn); frozen_bus = pcibios_find_pci_bus(frozen_dn); @@ -291,6 +292,13 @@ void handle_eeh_events (struct eeh_event *event) frozen_pdn = PCI_DN(frozen_dn); frozen_pdn->eeh_freeze_count++; + + pci_str = pci_name (frozen_pdn->pcidev); + drv_str = pcid_name (frozen_pdn->pcidev); + if (!pci_str) { + pci_str = pci_name (event->dev); + drv_str = pcid_name (event->dev); + } if (frozen_pdn->eeh_freeze_count > EEH_MAX_ALLOWED_FREEZES) goto hard_fail; @@ -306,9 +314,7 @@ void handle_eeh_events (struct eeh_event *event) eeh_slot_error_detail(frozen_pdn, 1 /* Temporary Error */); printk(KERN_WARNING "EEH: This PCI device has failed %d times since last reboot: %s - %s\n", - frozen_pdn->eeh_freeze_count, - pci_name (frozen_pdn->pcidev), - pcid_name(frozen_pdn->pcidev)); + frozen_pdn->eeh_freeze_count, drv_str, pci_str); /* Walk the various device drivers attached to this slot through * a reset sequence, giving each an opportunity to do what it needs @@ -360,9 +366,7 @@ hard_fail: "EEH: PCI device %s - %s has failed %d times \n" "and has been permanently disabled. Please try reseating\n" "this device or replacing it.\n", - pci_name (frozen_pdn->pcidev), - pcid_name(frozen_pdn->pcidev), - frozen_pdn->eeh_freeze_count); + drv_str, pci_str, frozen_pdn->eeh_freeze_count); eeh_slot_error_detail(frozen_pdn, 2 /* Permanent Error */); -- cgit v1.2.3-18-g5258 From 4df20460a3ff0d60280738b094945c56cb5567a5 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Sat, 25 Mar 2006 17:25:17 +1100 Subject: [PATCH] powerpc: Allow non zero boot cpuids We currently have a hack to flip the boot cpu and its secondary thread to logical cpuid 0 and 1. This means the logical - physical mapping will differ depending on which cpu is boot cpu. This is most apparent on kexec, where we might kexec on any cpu and therefore change the mapping from boot to boot. The patch below does a first pass early on to work out the logical cpuid of the boot thread. We then fix up some paca structures to match. Ive also removed the boot_cpuid_phys variable for ppc64, to be consistent we use get_hard_smp_processor_id(boot_cpuid) everywhere. Signed-off-by: Anton Blanchard Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/head_64.S | 26 +++++------ arch/powerpc/kernel/paca.c | 21 ++------- arch/powerpc/kernel/prom.c | 83 +++++++++++++++++++++++------------ arch/powerpc/kernel/setup-common.c | 16 +------ arch/powerpc/kernel/setup_64.c | 12 +++-- arch/powerpc/platforms/pseries/xics.c | 2 +- 6 files changed, 83 insertions(+), 77 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 7e7f7d24330..a5ae04a57c7 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -1851,21 +1851,6 @@ _STATIC(start_here_multiplatform) bl .__save_cpu_setup sync - /* Setup a valid physical PACA pointer in SPRG3 for early_setup - * note that boot_cpuid can always be 0 nowadays since there is - * nowhere it can be initialized differently before we reach this - * code - */ - LOAD_REG_IMMEDIATE(r27, boot_cpuid) - add r27,r27,r26 - lwz r27,0(r27) - - LOAD_REG_IMMEDIATE(r24, paca) /* Get base vaddr of paca array */ - mulli r13,r27,PACA_SIZE /* Calculate vaddr of right paca */ - add r13,r13,r24 /* for this processor. */ - add r13,r13,r26 /* convert to physical addr */ - mtspr SPRN_SPRG3,r13 - /* Do very early kernel initializations, including initial hash table, * stab and slb setup before we turn on relocation. */ @@ -1934,6 +1919,17 @@ _STATIC(start_here_common) /* Not reached */ BUG_OPCODE +/* Put the paca pointer into r13 and SPRG3 */ +_GLOBAL(setup_boot_paca) + LOAD_REG_IMMEDIATE(r3, boot_cpuid) + lwz r3,0(r3) + LOAD_REG_IMMEDIATE(r4, paca) /* Get base vaddr of paca array */ + mulli r3,r3,PACA_SIZE /* Calculate vaddr of right paca */ + add r13,r3,r4 /* for this processor. */ + mtspr SPRN_SPRG3,r13 + + blr + /* * We put a few things here that have to be page-aligned. * This stuff goes at the beginning of the bss, which is page-aligned. diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c index 5d1b708086b..f505a8827e3 100644 --- a/arch/powerpc/kernel/paca.c +++ b/arch/powerpc/kernel/paca.c @@ -56,14 +56,11 @@ struct lppaca lppaca[] = { * processors. The processor VPD array needs one entry per physical * processor (not thread). */ -#define PACA_INIT_COMMON(number, start, asrr, asrv) \ +#define PACA_INIT_COMMON(number) \ .lppaca_ptr = &lppaca[number], \ .lock_token = 0x8000, \ .paca_index = (number), /* Paca Index */ \ .kernel_toc = (unsigned long)(&__toc_start) + 0x8000UL, \ - .stab_real = (asrr), /* Real pointer to segment table */ \ - .stab_addr = (asrv), /* Virt pointer to segment table */ \ - .cpu_start = (start), /* Processor start */ \ .hw_cpu_id = 0xffff, #ifdef CONFIG_PPC_ISERIES @@ -72,30 +69,20 @@ struct lppaca lppaca[] = { #define PACA_INIT(number) \ { \ - PACA_INIT_COMMON(number, 0, 0, 0) \ - PACA_INIT_ISERIES(number) \ -} - -#define BOOTCPU_PACA_INIT(number) \ -{ \ - PACA_INIT_COMMON(number, 1, 0, (u64)&initial_stab) \ + PACA_INIT_COMMON(number) \ PACA_INIT_ISERIES(number) \ } #else #define PACA_INIT(number) \ { \ - PACA_INIT_COMMON(number, 0, 0, 0) \ + PACA_INIT_COMMON(number) \ } -#define BOOTCPU_PACA_INIT(number) \ -{ \ - PACA_INIT_COMMON(number, 1, STAB0_PHYS_ADDR, (u64)&initial_stab) \ -} #endif struct paca_struct paca[] = { - BOOTCPU_PACA_INIT(0), + PACA_INIT(0), #if NR_CPUS > 1 PACA_INIT( 1), PACA_INIT( 2), PACA_INIT( 3), #if NR_CPUS > 4 diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index d63cd562d9d..5a24415a2e3 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -854,35 +854,70 @@ void __init unflatten_device_tree(void) DBG(" <- unflatten_device_tree()\n"); } - static int __init early_init_dt_scan_cpus(unsigned long node, - const char *uname, int depth, void *data) + const char *uname, int depth, + void *data) { - u32 *prop; - unsigned long size; - char *type = of_get_flat_dt_prop(node, "device_type", &size); + static int logical_cpuid = 0; + char *type = of_get_flat_dt_prop(node, "device_type", NULL); + u32 *prop, *intserv; + int i, nthreads; + unsigned long len; + int found = 0; /* We are scanning "cpu" nodes only */ if (type == NULL || strcmp(type, "cpu") != 0) return 0; - boot_cpuid = 0; - boot_cpuid_phys = 0; - if (initial_boot_params && initial_boot_params->version >= 2) { - /* version 2 of the kexec param format adds the phys cpuid - * of booted proc. - */ - boot_cpuid_phys = initial_boot_params->boot_cpuid_phys; + /* Get physical cpuid */ + intserv = of_get_flat_dt_prop(node, "ibm,ppc-interrupt-server#s", &len); + if (intserv) { + nthreads = len / sizeof(int); } else { - /* Check if it's the boot-cpu, set it's hw index now */ - if (of_get_flat_dt_prop(node, + intserv = of_get_flat_dt_prop(node, "reg", NULL); + nthreads = 1; + } + + /* + * Now see if any of these threads match our boot cpu. + * NOTE: This must match the parsing done in smp_setup_cpu_maps. + */ + for (i = 0; i < nthreads; i++) { + /* + * version 2 of the kexec param format adds the phys cpuid of + * booted proc. + */ + if (initial_boot_params && initial_boot_params->version >= 2) { + if (intserv[i] == + initial_boot_params->boot_cpuid_phys) { + found = 1; + break; + } + } else { + /* + * Check if it's the boot-cpu, set it's hw index now, + * unfortunately this format did not support booting + * off secondary threads. + */ + if (of_get_flat_dt_prop(node, "linux,boot-cpu", NULL) != NULL) { - prop = of_get_flat_dt_prop(node, "reg", NULL); - if (prop != NULL) - boot_cpuid_phys = *prop; + found = 1; + break; + } } + +#ifdef CONFIG_SMP + /* logical cpu id is always 0 on UP kernels */ + logical_cpuid++; +#endif + } + + if (found) { + DBG("boot cpu: logical %d physical %d\n", logical_cpuid, + intserv[i]); + boot_cpuid = logical_cpuid; + set_hard_smp_processor_id(boot_cpuid, intserv[i]); } - set_hard_smp_processor_id(0, boot_cpuid_phys); #ifdef CONFIG_ALTIVEC /* Check if we have a VMX and eventually update CPU features */ @@ -901,16 +936,10 @@ static int __init early_init_dt_scan_cpus(unsigned long node, #endif /* CONFIG_ALTIVEC */ #ifdef CONFIG_PPC_PSERIES - /* - * Check for an SMT capable CPU and set the CPU feature. We do - * this by looking at the size of the ibm,ppc-interrupt-server#s - * property - */ - prop = (u32 *)of_get_flat_dt_prop(node, "ibm,ppc-interrupt-server#s", - &size); - cur_cpu_spec->cpu_features &= ~CPU_FTR_SMT; - if (prop && ((size / sizeof(u32)) > 1)) + if (nthreads > 1) cur_cpu_spec->cpu_features |= CPU_FTR_SMT; + else + cur_cpu_spec->cpu_features &= ~CPU_FTR_SMT; #endif return 0; diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index c1d62bf11f2..b17630ad4ac 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -352,12 +352,13 @@ void __init check_for_initrd(void) * must be called before using this. * * While we're here, we may as well set the "physical" cpu ids in the paca. + * + * NOTE: This must match the parsing done in early_init_dt_scan_cpus. */ void __init smp_setup_cpu_maps(void) { struct device_node *dn = NULL; int cpu = 0; - int swap_cpuid = 0; while ((dn = of_find_node_by_type(dn, "cpu")) && cpu < NR_CPUS) { int *intserv; @@ -376,24 +377,11 @@ void __init smp_setup_cpu_maps(void) for (j = 0; j < nthreads && cpu < NR_CPUS; j++) { cpu_set(cpu, cpu_present_map); set_hard_smp_processor_id(cpu, intserv[j]); - - if (intserv[j] == boot_cpuid_phys) - swap_cpuid = cpu; cpu_set(cpu, cpu_possible_map); cpu++; } } - /* Swap CPU id 0 with boot_cpuid_phys, so we can always assume that - * boot cpu is logical 0. - */ - if (boot_cpuid_phys != get_hard_smp_processor_id(0)) { - u32 tmp; - tmp = get_hard_smp_processor_id(0); - set_hard_smp_processor_id(0, boot_cpuid_phys); - set_hard_smp_processor_id(swap_cpuid, tmp); - } - #ifdef CONFIG_PPC64 /* * On pSeries LPAR, we need to know how many cpus diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 2f3fdad3559..6c9b093c23a 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -73,7 +73,6 @@ int have_of = 1; int boot_cpuid = 0; -int boot_cpuid_phys = 0; dev_t boot_dev; u64 ppc64_pft_size; @@ -208,7 +207,6 @@ static struct machdep_calls __initdata *machines[] = { void __init early_setup(unsigned long dt_ptr) { - struct paca_struct *lpaca = get_paca(); static struct machdep_calls **mach; /* Enable early debugging if any specified (see udbg.h) */ @@ -223,6 +221,14 @@ void __init early_setup(unsigned long dt_ptr) */ early_init_devtree(__va(dt_ptr)); + /* Now we know the logical id of our boot cpu, setup the paca. */ + setup_boot_paca(); + + /* Fix up paca fields required for the boot cpu */ + get_paca()->cpu_start = 1; + get_paca()->stab_real = __pa((u64)&initial_stab); + get_paca()->stab_addr = (u64)&initial_stab; + /* * Iterate all ppc_md structures until we find the proper * one for the current machine type @@ -260,7 +266,7 @@ void __init early_setup(unsigned long dt_ptr) if (cpu_has_feature(CPU_FTR_SLB)) slb_initialize(); else - stab_initialize(lpaca->stab_real); + stab_initialize(get_paca()->stab_real); } DBG(" <- early_setup()\n"); diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index eb86cdb9b80..c60d3ff25a2 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -500,7 +500,7 @@ nextnode: np; np = of_find_node_by_type(np, "cpu")) { ireg = (uint *)get_property(np, "reg", &ilen); - if (ireg && ireg[0] == boot_cpuid_phys) { + if (ireg && ireg[0] == get_hard_smp_processor_id(boot_cpuid)) { ireg = (uint *)get_property(np, "ibm,ppc-interrupt-gserver#s", &ilen); i = ilen / sizeof(int); -- cgit v1.2.3-18-g5258 From c258dd40ab8851c41873516ef90125e3bcd2e3e1 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Sat, 25 Mar 2006 17:27:09 +1100 Subject: [PATCH] powerpc: Consistent printing of node id We were printing node ids in hex in one spot. Lets be consistent and always print them in decimal. Signed-off-by: Anton Blanchard Signed-off-by: Paul Mackerras --- arch/powerpc/mm/mem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index badac10d700..4737f84bb19 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -342,7 +342,7 @@ void __init mem_init(void) #ifdef CONFIG_NEED_MULTIPLE_NODES for_each_online_node(nid) { if (NODE_DATA(nid)->node_spanned_pages != 0) { - printk("freeing bootmem node %x\n", nid); + printk("freeing bootmem node %d\n", nid); totalram_pages += free_all_bootmem_node(NODE_DATA(nid)); } -- cgit v1.2.3-18-g5258 From 37a801c776109dce801875b12525a9eaa12481e6 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Sun, 26 Mar 2006 10:07:35 +1000 Subject: [PATCH] powerpc: legacy_serial loop cleanup We only ever execute the loop once, so let's move it to a function making it more readable. Cleanup patch, no functional change. Signed-off-by: Michael Neuling Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/legacy_serial.c | 38 ++++++++++++++++++------------------- 1 file changed, 19 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index 09d9c825fa9..6e67b5b49ba 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -236,6 +236,23 @@ static int __init add_legacy_pci_port(struct device_node *np, } #endif +static void __init setup_legacy_serial_console(int console) +{ + struct legacy_serial_info *info = + &legacy_serial_infos[console]; + void __iomem *addr; + + if (info->taddr == 0) + return; + addr = ioremap(info->taddr, 0x1000); + if (addr == NULL) + return; + if (info->speed == 0) + info->speed = udbg_probe_uart_speed(addr, info->clock); + DBG("default console speed = %d\n", info->speed); + udbg_init_uart(addr, info->speed, info->clock); +} + /* * This is called very early, as part of setup_system() or eventually * setup_arch(), basically before anything else in this file. This function @@ -318,25 +335,8 @@ void __init find_legacy_serial_ports(void) #endif DBG("legacy_serial_console = %d\n", legacy_serial_console); - - /* udbg is 64 bits only for now, that will change soon though ... */ - while (legacy_serial_console >= 0) { - struct legacy_serial_info *info = - &legacy_serial_infos[legacy_serial_console]; - void __iomem *addr; - - if (info->taddr == 0) - break; - addr = ioremap(info->taddr, 0x1000); - if (addr == NULL) - break; - if (info->speed == 0) - info->speed = udbg_probe_uart_speed(addr, info->clock); - DBG("default console speed = %d\n", info->speed); - udbg_init_uart(addr, info->speed, info->clock); - break; - } - + if (legacy_serial_console >= 0) + setup_legacy_serial_console(legacy_serial_console); DBG(" <- find_legacy_serial_port()\n"); } -- cgit v1.2.3-18-g5258 From 5931c4350059ce9bd5fe398b628c478753a11e44 Mon Sep 17 00:00:00 2001 From: Sylvain Munaut Date: Sun, 26 Mar 2006 13:37:07 +0200 Subject: [PATCH] ppc32: Adds support for the PCI hostbridge in MPC5200B ppc32: Adds support for the PCI hostbridge in MPC5200B Signed-off-by: John Rigby Signed-off-by: Sylvain Munaut Signed-off-by: Paul Mackerras --- arch/ppc/syslib/mpc52xx_pci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ppc/syslib/mpc52xx_pci.c b/arch/ppc/syslib/mpc52xx_pci.c index 9ec525f9fe9..5a5a7a9cd24 100644 --- a/arch/ppc/syslib/mpc52xx_pci.c +++ b/arch/ppc/syslib/mpc52xx_pci.c @@ -225,7 +225,8 @@ mpc52xx_pci_fixup_resources(struct pci_dev *dev) /* The PCI Host bridge of MPC52xx has a prefetch memory resource fixed to 1Gb. Doesn't fit in the resource system so we remove it */ if ( (dev->vendor == PCI_VENDOR_ID_MOTOROLA) && - (dev->device == PCI_DEVICE_ID_MOTOROLA_MPC5200) ) { + ( dev->device == PCI_DEVICE_ID_MOTOROLA_MPC5200 + || dev->device == PCI_DEVICE_ID_MOTOROLA_MPC5200B) ) { struct resource *res = &dev->resource[1]; res->start = res->end = res->flags = 0; } -- cgit v1.2.3-18-g5258 From f8dd311982c86141f4f2fd326c0edf0c2d9fd97b Mon Sep 17 00:00:00 2001 From: Sylvain Munaut Date: Sun, 26 Mar 2006 13:37:38 +0200 Subject: [PATCH] ppc32: Adds support for the LITE5200B dev board ppc32: Adds support for the LITE5200B dev board This LITE5200B devboard is the new development board for the Freescale MPC5200 processor. It has two PCI slots and so a different PCI IRQ routing. Signed-off-by: John Rigby Signed-off-by: Sylvain Munaut Signed-off-by: Paul Mackerras --- arch/ppc/Kconfig | 7 +++++++ arch/ppc/platforms/lite5200.c | 33 ++++++++++++++++++++++++++++++--- 2 files changed, 37 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index 3a3e302b4ea..75802ca0f8c 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -715,6 +715,13 @@ config LITE5200 much but it's only been tested on this board version. I think this board is also known as IceCube. +config LITE5200B + bool "Freescale LITE5200B" + depends LITE5200 + help + Support for the LITE5200B dev board for the MPC5200 from Freescale. + This is the new board with 2 PCI slots. + config MPC834x_SYS bool "Freescale MPC834x SYS" help diff --git a/arch/ppc/platforms/lite5200.c b/arch/ppc/platforms/lite5200.c index 5171b53bccb..d91efe1dc2d 100644 --- a/arch/ppc/platforms/lite5200.c +++ b/arch/ppc/platforms/lite5200.c @@ -34,6 +34,7 @@ #include #include #include +#include #include @@ -68,12 +69,32 @@ lite5200_show_cpuinfo(struct seq_file *m) } #ifdef CONFIG_PCI +#ifdef CONFIG_LITE5200B +static int +lite5200_map_irq(struct pci_dev *dev, unsigned char idsel, + unsigned char pin) +{ + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + {MPC52xx_IRQ0, MPC52xx_IRQ1, MPC52xx_IRQ2, MPC52xx_IRQ3}, + {MPC52xx_IRQ1, MPC52xx_IRQ2, MPC52xx_IRQ3, MPC52xx_IRQ0}, + }; + + const long min_idsel = 24, max_idsel = 25, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; +} +#else /* Original Lite */ static int lite5200_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) { return (pin == 1) && (idsel==24) ? MPC52xx_IRQ0 : -1; } #endif +#endif static void __init lite5200_setup_cpu(void) @@ -127,11 +148,17 @@ lite5200_setup_cpu(void) out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_SNOOP); out_be32(&xlb->snoop_window, MPC52xx_PCI_TARGET_MEM | 0x1d); - /* IRQ[0-3] setup : IRQ0 - Level Active Low */ - /* IRQ[1-3] - Level Active High */ + /* IRQ[0-3] setup */ intr_ctrl = in_be32(&intr->ctrl); intr_ctrl &= ~0x00ff0000; - intr_ctrl |= 0x00c00000; +#ifdef CONFIG_LITE5200B + /* IRQ[0-3] Level Active Low */ + intr_ctrl |= 0x00ff0000; +#else + /* IRQ0 Level Active Low + * IRQ[1-3] Level Active High */ + intr_ctrl |= 0x00c00000; +#endif out_be32(&intr->ctrl, intr_ctrl); /* Unmap reg zone */ -- cgit v1.2.3-18-g5258 From 1f5e3b028c5b592b5a792a390c78d609219aebfd Mon Sep 17 00:00:00 2001 From: Sylvain Munaut Date: Sun, 26 Mar 2006 13:38:09 +0200 Subject: [PATCH] ppc32: Reorganize and complete MPC52xx initial cpu setup ppc32: Reorganize and complete MPC52xx initial cpu setup This patch splits up the CPU setup into a generic part and a platform specific part. We also add a few missing init at the same time. Signed-off-by: Sylvain Munaut Signed-off-by: Paul Mackerras --- arch/ppc/platforms/lite5200.c | 38 +++++++++----------------------- arch/ppc/syslib/mpc52xx_setup.c | 48 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 58 insertions(+), 28 deletions(-) (limited to 'arch') diff --git a/arch/ppc/platforms/lite5200.c b/arch/ppc/platforms/lite5200.c index d91efe1dc2d..fecbe9adc9e 100644 --- a/arch/ppc/platforms/lite5200.c +++ b/arch/ppc/platforms/lite5200.c @@ -36,8 +36,6 @@ #include #include -#include - extern int powersave_nap; @@ -99,34 +97,23 @@ lite5200_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) static void __init lite5200_setup_cpu(void) { - struct mpc52xx_cdm __iomem *cdm; struct mpc52xx_gpio __iomem *gpio; struct mpc52xx_intr __iomem *intr; - struct mpc52xx_xlb __iomem *xlb; u32 port_config; u32 intr_ctrl; /* Map zones */ - cdm = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE); gpio = ioremap(MPC52xx_PA(MPC52xx_GPIO_OFFSET), MPC52xx_GPIO_SIZE); - xlb = ioremap(MPC52xx_PA(MPC52xx_XLB_OFFSET), MPC52xx_XLB_SIZE); intr = ioremap(MPC52xx_PA(MPC52xx_INTR_OFFSET), MPC52xx_INTR_SIZE); - if (!cdm || !gpio || !xlb || !intr) { - printk("lite5200.c: Error while mapping CDM/GPIO/XLB/INTR during" - "lite5200_setup_cpu\n"); + if (!gpio || !intr) { + printk(KERN_ERR __FILE__ ": " + "Error while mapping GPIO/INTR during " + "lite5200_setup_cpu\n"); goto unmap_regs; } - /* Use internal 48 Mhz */ - out_8(&cdm->ext_48mhz_en, 0x00); - out_8(&cdm->fd_enable, 0x01); - if (in_be32(&cdm->rstcfg) & 0x40) /* Assumes 33Mhz clock */ - out_be16(&cdm->fd_counters, 0x0001); - else - out_be16(&cdm->fd_counters, 0x5555); - /* Get port mux config */ port_config = in_be32(&gpio->port_config); @@ -137,17 +124,13 @@ lite5200_setup_cpu(void) port_config &= ~0x00007000; /* Differential mode - USB1 only */ port_config |= 0x00001000; + /* ATA CS is on csb_4/5 */ + port_config &= ~0x03000000; + port_config |= 0x01000000; + /* Commit port config */ out_be32(&gpio->port_config, port_config); - /* Configure the XLB Arbiter */ - out_be32(&xlb->master_pri_enable, 0xff); - out_be32(&xlb->master_priority, 0x11111111); - - /* Enable ram snooping for 1GB window */ - out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_SNOOP); - out_be32(&xlb->snoop_window, MPC52xx_PCI_TARGET_MEM | 0x1d); - /* IRQ[0-3] setup */ intr_ctrl = in_be32(&intr->ctrl); intr_ctrl &= ~0x00ff0000; @@ -163,9 +146,7 @@ lite5200_setup_cpu(void) /* Unmap reg zone */ unmap_regs: - if (cdm) iounmap(cdm); if (gpio) iounmap(gpio); - if (xlb) iounmap(xlb); if (intr) iounmap(intr); } @@ -173,7 +154,8 @@ static void __init lite5200_setup_arch(void) { /* CPU & Port mux setup */ - lite5200_setup_cpu(); + mpc52xx_setup_cpu(); /* Generic */ + lite5200_setup_cpu(); /* Platform specific */ #ifdef CONFIG_PCI /* PCI Bridge setup */ diff --git a/arch/ppc/syslib/mpc52xx_setup.c b/arch/ppc/syslib/mpc52xx_setup.c index 2ee48ce0a51..ee6379bb415 100644 --- a/arch/ppc/syslib/mpc52xx_setup.c +++ b/arch/ppc/syslib/mpc52xx_setup.c @@ -24,6 +24,8 @@ #include #include +#include + extern bd_t __res; static int core_mult[] = { /* CPU Frequency multiplier, taken */ @@ -216,6 +218,52 @@ mpc52xx_calibrate_decr(void) tb_to_us = mulhwu_scale_factor(xlbfreq / divisor, 1000000); } + +void __init +mpc52xx_setup_cpu(void) +{ + struct mpc52xx_cdm __iomem *cdm; + struct mpc52xx_xlb __iomem *xlb; + + /* Map zones */ + cdm = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE); + xlb = ioremap(MPC52xx_PA(MPC52xx_XLB_OFFSET), MPC52xx_XLB_SIZE); + + if (!cdm || !xlb) { + printk(KERN_ERR __FILE__ ": " + "Error while mapping CDM/XLB during " + "mpc52xx_setup_cpu\n"); + goto unmap_regs; + } + + /* Use internal 48 Mhz */ + out_8(&cdm->ext_48mhz_en, 0x00); + out_8(&cdm->fd_enable, 0x01); + if (in_be32(&cdm->rstcfg) & 0x40) /* Assumes 33Mhz clock */ + out_be16(&cdm->fd_counters, 0x0001); + else + out_be16(&cdm->fd_counters, 0x5555); + + /* Configure the XLB Arbiter priorities */ + out_be32(&xlb->master_pri_enable, 0xff); + out_be32(&xlb->master_priority, 0x11111111); + + /* Enable ram snooping for 1GB window */ + out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_SNOOP); + out_be32(&xlb->snoop_window, MPC52xx_PCI_TARGET_MEM | 0x1d); + + /* Disable XLB pipelining */ + /* (cfr errate 292. We could do this only just before ATA PIO + transaction and re-enable it after ...) */ + out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_PLDIS); + + /* Unmap reg zone */ +unmap_regs: + if (cdm) iounmap(cdm); + if (xlb) iounmap(xlb); +} + + int mpc52xx_match_psc_function(int psc_idx, const char *func) { struct mpc52xx_psc_func *cf = mpc52xx_psc_functions; -- cgit v1.2.3-18-g5258 From a0652fc9a28c3ef8cd59264bfcb089c44d1b0e06 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 27 Mar 2006 15:03:03 +1100 Subject: powerpc: Unify the 32 and 64 bit idle loops This unifies the 32-bit (ARCH=ppc and ARCH=powerpc) and 64-bit idle loops. It brings over the concept of having a ppc_md.power_save function from 32-bit to ARCH=powerpc, which lets us get rid of native_idle(). With this we will also be able to simplify the idle handling for pSeries and cell. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/Makefile | 6 +- arch/powerpc/kernel/entry_32.S | 8 +- arch/powerpc/kernel/idle.c | 122 +++++++++++++++++ arch/powerpc/kernel/idle_64.c | 121 ----------------- arch/powerpc/kernel/idle_6xx.S | 15 -- arch/powerpc/kernel/idle_power4.S | 15 -- arch/powerpc/kernel/setup_32.c | 7 +- arch/powerpc/kernel/setup_64.c | 6 - arch/powerpc/platforms/maple/setup.c | 2 +- arch/powerpc/platforms/powermac/setup.c | 2 +- arch/ppc/Makefile | 2 - arch/ppc/kernel/Makefile | 4 +- arch/ppc/kernel/entry.S | 8 +- arch/ppc/kernel/idle.c | 112 --------------- arch/ppc/kernel/idle_6xx.S | 233 -------------------------------- arch/ppc/kernel/idle_power4.S | 91 ------------- 16 files changed, 143 insertions(+), 611 deletions(-) create mode 100644 arch/powerpc/kernel/idle.c delete mode 100644 arch/powerpc/kernel/idle_64.c delete mode 100644 arch/ppc/kernel/idle.c delete mode 100644 arch/ppc/kernel/idle_6xx.S delete mode 100644 arch/ppc/kernel/idle_power4.S (limited to 'arch') diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 80e9fe2632b..f2c47e90703 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -12,12 +12,12 @@ endif obj-y := semaphore.o cputable.o ptrace.o syscalls.o \ irq.o align.o signal_32.o pmc.o vdso.o \ - init_task.o process.o systbl.o + init_task.o process.o systbl.o idle.o obj-y += vdso32/ obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \ signal_64.o ptrace32.o \ paca.o cpu_setup_power4.o \ - firmware.o sysfs.o idle_64.o + firmware.o sysfs.o obj-$(CONFIG_PPC64) += vdso64/ obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o obj-$(CONFIG_POWER4) += idle_power4.o @@ -34,6 +34,7 @@ obj-$(CONFIG_IBMEBUS) += ibmebus.o obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o obj64-$(CONFIG_PPC_MULTIPLATFORM) += nvram_64.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o +obj-$(CONFIG_6xx) += idle_6xx.o ifeq ($(CONFIG_PPC_MERGE),y) @@ -51,7 +52,6 @@ obj-$(CONFIG_PPC64) += misc_64.o dma_64.o iommu.o obj-$(CONFIG_PPC_MULTIPLATFORM) += prom_init.o obj-$(CONFIG_MODULES) += ppc_ksyms.o obj-$(CONFIG_BOOTX_TEXT) += btext.o -obj-$(CONFIG_6xx) += idle_6xx.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_KPROBES) += kprobes.o obj-$(CONFIG_PPC_UDBG_16550) += legacy_serial.o udbg_16550.o diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index 4827ca1ec89..b3a97946722 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -135,10 +135,10 @@ transfer_to_handler: mfspr r11,SPRN_HID0 mtcr r11 BEGIN_FTR_SECTION - bt- 8,power_save_6xx_restore /* Check DOZE */ + bt- 8,4f /* Check DOZE */ END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE) BEGIN_FTR_SECTION - bt- 9,power_save_6xx_restore /* Check NAP */ + bt- 9,4f /* Check NAP */ END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) #endif /* CONFIG_6xx */ .globl transfer_to_handler_cont @@ -157,6 +157,10 @@ transfer_to_handler_cont: SYNC RFI /* jump to handler, enable MMU */ +#ifdef CONFIG_6xx +4: b power_save_6xx_restore +#endif + /* * On kernel stack overflow, load up an initial stack pointer * and call StackOverflow(regs), which should not return. diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c new file mode 100644 index 00000000000..e9f321d74d8 --- /dev/null +++ b/arch/powerpc/kernel/idle.c @@ -0,0 +1,122 @@ +/* + * Idle daemon for PowerPC. Idle daemon will handle any action + * that needs to be taken when the system becomes idle. + * + * Originally written by Cort Dougan (cort@cs.nmt.edu). + * Subsequent 32-bit hacking by Tom Rini, Armin Kuster, + * Paul Mackerras and others. + * + * iSeries supported added by Mike Corrigan + * + * Additional shared processor, SMT, and firmware support + * Copyright (c) 2003 Dave Engebretsen + * + * 32-bit and 64-bit versions merged by Paul Mackerras + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_HOTPLUG_CPU +#define cpu_should_die() (cpu_is_offline(smp_processor_id()) && \ + system_state == SYSTEM_RUNNING) +#else +#define cpu_should_die() 0 +#endif + +/* + * The body of the idle task. + */ +void cpu_idle(void) +{ + if (ppc_md.idle_loop) + ppc_md.idle_loop(); /* doesn't return */ + + set_thread_flag(TIF_POLLING_NRFLAG); + while (1) { + ppc64_runlatch_off(); + + while (!need_resched() && !cpu_should_die()) { + if (ppc_md.power_save) { + clear_thread_flag(TIF_POLLING_NRFLAG); + /* + * smp_mb is so clearing of TIF_POLLING_NRFLAG + * is ordered w.r.t. need_resched() test. + */ + smp_mb(); + local_irq_disable(); + + /* check again after disabling irqs */ + if (!need_resched() && !cpu_should_die()) + ppc_md.power_save(); + + local_irq_enable(); + set_thread_flag(TIF_POLLING_NRFLAG); + + } else { + /* + * Go into low thread priority and possibly + * low power mode. + */ + HMT_low(); + HMT_very_low(); + } + } + + HMT_medium(); + ppc64_runlatch_on(); + if (cpu_should_die()) + cpu_die(); + preempt_enable_no_resched(); + schedule(); + preempt_disable(); + } +} + +int powersave_nap; + +#ifdef CONFIG_SYSCTL +/* + * Register the sysctl to set/clear powersave_nap. + */ +static ctl_table powersave_nap_ctl_table[]={ + { + .ctl_name = KERN_PPC_POWERSAVE_NAP, + .procname = "powersave-nap", + .data = &powersave_nap, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec, + }, + { 0, }, +}; +static ctl_table powersave_nap_sysctl_root[] = { + { 1, "kernel", NULL, 0, 0755, powersave_nap_ctl_table, }, + { 0,}, +}; + +static int __init +register_powersave_nap_sysctl(void) +{ + register_sysctl_table(powersave_nap_sysctl_root, 0); + + return 0; +} +__initcall(register_powersave_nap_sysctl); +#endif diff --git a/arch/powerpc/kernel/idle_64.c b/arch/powerpc/kernel/idle_64.c deleted file mode 100644 index b879d3057ef..00000000000 --- a/arch/powerpc/kernel/idle_64.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * Idle daemon for PowerPC. Idle daemon will handle any action - * that needs to be taken when the system becomes idle. - * - * Originally Written by Cort Dougan (cort@cs.nmt.edu) - * - * iSeries supported added by Mike Corrigan - * - * Additional shared processor, SMT, and firmware support - * Copyright (c) 2003 Dave Engebretsen - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -extern void power4_idle(void); - -void default_idle(void) -{ - unsigned int cpu = smp_processor_id(); - set_thread_flag(TIF_POLLING_NRFLAG); - - while (1) { - if (!need_resched()) { - while (!need_resched() && !cpu_is_offline(cpu)) { - ppc64_runlatch_off(); - - /* - * Go into low thread priority and possibly - * low power mode. - */ - HMT_low(); - HMT_very_low(); - } - - HMT_medium(); - } - - ppc64_runlatch_on(); - preempt_enable_no_resched(); - schedule(); - preempt_disable(); - if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING) - cpu_die(); - } -} - -void native_idle(void) -{ - while (1) { - ppc64_runlatch_off(); - - if (!need_resched()) - power4_idle(); - - if (need_resched()) { - ppc64_runlatch_on(); - preempt_enable_no_resched(); - schedule(); - preempt_disable(); - } - - if (cpu_is_offline(smp_processor_id()) && - system_state == SYSTEM_RUNNING) - cpu_die(); - } -} - -void cpu_idle(void) -{ - BUG_ON(NULL == ppc_md.idle_loop); - ppc_md.idle_loop(); -} - -int powersave_nap; - -#ifdef CONFIG_SYSCTL -/* - * Register the sysctl to set/clear powersave_nap. - */ -static ctl_table powersave_nap_ctl_table[]={ - { - .ctl_name = KERN_PPC_POWERSAVE_NAP, - .procname = "powersave-nap", - .data = &powersave_nap, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = &proc_dointvec, - }, - { 0, }, -}; -static ctl_table powersave_nap_sysctl_root[] = { - { 1, "kernel", NULL, 0, 0755, powersave_nap_ctl_table, }, - { 0,}, -}; - -static int __init -register_powersave_nap_sysctl(void) -{ - register_sysctl_table(powersave_nap_sysctl_root, 0); - - return 0; -} -__initcall(register_powersave_nap_sysctl); -#endif diff --git a/arch/powerpc/kernel/idle_6xx.S b/arch/powerpc/kernel/idle_6xx.S index 444fdcc769f..1647ea361ef 100644 --- a/arch/powerpc/kernel/idle_6xx.S +++ b/arch/powerpc/kernel/idle_6xx.S @@ -87,19 +87,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) cmpwi 0,r3,0 beqlr - /* Clear MSR:EE */ - mfmsr r7 - rlwinm r0,r7,0,17,15 - mtmsr r0 - - /* Check current_thread_info()->flags */ - rlwinm r4,r1,0,0,18 - lwz r4,TI_FLAGS(r4) - andi. r0,r4,_TIF_NEED_RESCHED - beq 1f - mtmsr r7 /* out of line this ? */ - blr -1: /* Some pre-nap cleanups needed on some CPUs */ andis. r0,r3,HID0_NAP@h beq 2f @@ -220,8 +207,6 @@ _GLOBAL(nap_save_msscr0) _GLOBAL(nap_save_hid1) .space 4*NR_CPUS -_GLOBAL(powersave_nap) - .long 0 _GLOBAL(powersave_lowspeed) .long 0 diff --git a/arch/powerpc/kernel/idle_power4.S b/arch/powerpc/kernel/idle_power4.S index c16b4afab58..692cf2ebe0f 100644 --- a/arch/powerpc/kernel/idle_power4.S +++ b/arch/powerpc/kernel/idle_power4.S @@ -49,21 +49,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_CAN_NAP) cmpwi 0,r4,0 beqlr - /* Clear MSR:EE */ - mfmsr r7 - li r4,0 - ori r4,r4,MSR_EE - andc r0,r7,r4 - mtmsrd r0 - - /* Check current_thread_info()->flags */ - clrrdi r4,r1,THREAD_SHIFT - ld r4,TI_FLAGS(r4) - andi. r0,r4,_TIF_NEED_RESCHED - beq 1f - mtmsrd r7 /* out of line this ? */ - blr -1: /* Go to NAP now */ BEGIN_FTR_SECTION DSSALL diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 676f894c338..e39f830317a 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -53,9 +53,6 @@ extern void platform_init(void); extern void bootx_init(unsigned long r4, unsigned long phys); -extern void ppc6xx_idle(void); -extern void power4_idle(void); - boot_infos_t *boot_infos; struct ide_machdep_calls ppc_ide_md; @@ -194,7 +191,9 @@ void __init machine_init(unsigned long dt_ptr, unsigned long phys) platform_init(); #ifdef CONFIG_6xx - ppc_md.power_save = ppc6xx_idle; + if (cpu_has_feature(CPU_FTR_CAN_DOZE) || + cpu_has_feature(CPU_FTR_CAN_NAP)) + ppc_md.power_save = ppc6xx_idle; #endif if (ppc_md.progress) diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 6c9b093c23a..5b63a861ef4 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -607,12 +607,6 @@ void __init setup_arch(char **cmdline_p) ppc_md.setup_arch(); - /* Use the default idle loop if the platform hasn't provided one. */ - if (NULL == ppc_md.idle_loop) { - ppc_md.idle_loop = default_idle; - printk(KERN_INFO "Using default idle loop\n"); - } - paging_init(); ppc64_boot_msg(0x15, "Setup Done"); } diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c index ec5c1e10c40..137d6063182 100644 --- a/arch/powerpc/platforms/maple/setup.c +++ b/arch/powerpc/platforms/maple/setup.c @@ -290,7 +290,7 @@ struct machdep_calls __initdata maple_md = { .get_rtc_time = maple_get_rtc_time, .calibrate_decr = generic_calibrate_decr, .progress = maple_progress, - .idle_loop = native_idle, + .power_save = power4_idle, #ifdef CONFIG_KEXEC .machine_kexec = default_machine_kexec, .machine_kexec_prepare = default_machine_kexec_prepare, diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 385aab90c4d..c2696d00672 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -733,7 +733,7 @@ struct machdep_calls __initdata pmac_md = { .progress = udbg_progress, #ifdef CONFIG_PPC64 .pci_probe_mode = pmac_pci_probe_mode, - .idle_loop = native_idle, + .power_save = power4_idle, .enable_pmcs = power4_enable_pmcs, #ifdef CONFIG_KEXEC .machine_kexec = default_machine_kexec, diff --git a/arch/ppc/Makefile b/arch/ppc/Makefile index 9fbdf54ba2b..cde5fa87f45 100644 --- a/arch/ppc/Makefile +++ b/arch/ppc/Makefile @@ -59,8 +59,6 @@ head-$(CONFIG_4xx) := arch/ppc/kernel/head_4xx.o head-$(CONFIG_44x) := arch/ppc/kernel/head_44x.o head-$(CONFIG_FSL_BOOKE) := arch/ppc/kernel/head_fsl_booke.o -head-$(CONFIG_6xx) += arch/ppc/kernel/idle_6xx.o -head-$(CONFIG_POWER4) += arch/ppc/kernel/idle_power4.o head-$(CONFIG_PPC_FPU) += arch/powerpc/kernel/fpu.o core-y += arch/ppc/kernel/ arch/powerpc/kernel/ \ diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index e399bbb969a..1b2c7458a3d 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile @@ -8,10 +8,9 @@ extra-$(CONFIG_40x) := head_4xx.o extra-$(CONFIG_44x) := head_44x.o extra-$(CONFIG_FSL_BOOKE) := head_fsl_booke.o extra-$(CONFIG_8xx) := head_8xx.o -extra-$(CONFIG_6xx) += idle_6xx.o extra-y += vmlinux.lds -obj-y := entry.o traps.o idle.o time.o misc.o \ +obj-y := entry.o traps.o time.o misc.o \ setup.o \ ppc_htab.o obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o @@ -35,7 +34,6 @@ endif # These are here while we do the architecture merge else -obj-y := idle.o obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o obj-$(CONFIG_MODULES) += module.o diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S index 3a281597848..fa8d49789ef 100644 --- a/arch/ppc/kernel/entry.S +++ b/arch/ppc/kernel/entry.S @@ -135,10 +135,10 @@ transfer_to_handler: mfspr r11,SPRN_HID0 mtcr r11 BEGIN_FTR_SECTION - bt- 8,power_save_6xx_restore /* Check DOZE */ + bt- 8,4f /* Check DOZE */ END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE) BEGIN_FTR_SECTION - bt- 9,power_save_6xx_restore /* Check NAP */ + bt- 9,4f /* Check NAP */ END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) #endif /* CONFIG_6xx */ .globl transfer_to_handler_cont @@ -157,6 +157,10 @@ transfer_to_handler_cont: SYNC RFI /* jump to handler, enable MMU */ +#ifdef CONFIG_6xx +4: b power_save_6xx_restore +#endif + /* * On kernel stack overflow, load up an initial stack pointer * and call StackOverflow(regs), which should not return. diff --git a/arch/ppc/kernel/idle.c b/arch/ppc/kernel/idle.c deleted file mode 100644 index 1be3ca5bae4..00000000000 --- a/arch/ppc/kernel/idle.c +++ /dev/null @@ -1,112 +0,0 @@ -/* - * Idle daemon for PowerPC. Idle daemon will handle any action - * that needs to be taken when the system becomes idle. - * - * Written by Cort Dougan (cort@cs.nmt.edu). Subsequently hacked - * on by Tom Rini, Armin Kuster, Paul Mackerras and others. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -void default_idle(void) -{ - void (*powersave)(void); - - powersave = ppc_md.power_save; - - if (!need_resched()) { - if (powersave != NULL) - powersave(); -#ifdef CONFIG_SMP - else { - set_thread_flag(TIF_POLLING_NRFLAG); - while (!need_resched() && - !cpu_is_offline(smp_processor_id())) - barrier(); - clear_thread_flag(TIF_POLLING_NRFLAG); - } -#endif - } -} - -/* - * The body of the idle task. - */ -void cpu_idle(void) -{ - int cpu = smp_processor_id(); - - for (;;) { - while (!need_resched()) { - if (ppc_md.idle != NULL) - ppc_md.idle(); - else - default_idle(); - } - - if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING) - cpu_die(); - preempt_enable_no_resched(); - schedule(); - preempt_disable(); - } -} - -#if defined(CONFIG_SYSCTL) && defined(CONFIG_6xx) -/* - * Register the sysctl to set/clear powersave_nap. - */ -extern int powersave_nap; - -static ctl_table powersave_nap_ctl_table[]={ - { - .ctl_name = KERN_PPC_POWERSAVE_NAP, - .procname = "powersave-nap", - .data = &powersave_nap, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = &proc_dointvec, - }, - { 0, }, -}; -static ctl_table powersave_nap_sysctl_root[] = { - { 1, "kernel", NULL, 0, 0755, powersave_nap_ctl_table, }, - { 0,}, -}; - -static int __init -register_powersave_nap_sysctl(void) -{ - register_sysctl_table(powersave_nap_sysctl_root, 0); - - return 0; -} - -__initcall(register_powersave_nap_sysctl); -#endif diff --git a/arch/ppc/kernel/idle_6xx.S b/arch/ppc/kernel/idle_6xx.S deleted file mode 100644 index 1a2194cf682..00000000000 --- a/arch/ppc/kernel/idle_6xx.S +++ /dev/null @@ -1,233 +0,0 @@ -/* - * This file contains the power_save function for 6xx & 7xxx CPUs - * rewritten in assembler - * - * Warning ! This code assumes that if your machine has a 750fx - * it will have PLL 1 set to low speed mode (used during NAP/DOZE). - * if this is not the case some additional changes will have to - * be done to check a runtime var (a bit like powersave-nap) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#undef DEBUG - - .text - -/* - * Init idle, called at early CPU setup time from head.S for each CPU - * Make sure no rest of NAP mode remains in HID0, save default - * values for some CPU specific registers. Called with r24 - * containing CPU number and r3 reloc offset - */ -_GLOBAL(init_idle_6xx) -BEGIN_FTR_SECTION - mfspr r4,SPRN_HID0 - rlwinm r4,r4,0,10,8 /* Clear NAP */ - mtspr SPRN_HID0, r4 - b 1f -END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) - blr -1: - slwi r5,r24,2 - add r5,r5,r3 -BEGIN_FTR_SECTION - mfspr r4,SPRN_MSSCR0 - addis r6,r5, nap_save_msscr0@ha - stw r4,nap_save_msscr0@l(r6) -END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR) -BEGIN_FTR_SECTION - mfspr r4,SPRN_HID1 - addis r6,r5,nap_save_hid1@ha - stw r4,nap_save_hid1@l(r6) -END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX) - blr - -/* - * Here is the power_save_6xx function. This could eventually be - * split into several functions & changing the function pointer - * depending on the various features. - */ -_GLOBAL(ppc6xx_idle) - /* Check if we can nap or doze, put HID0 mask in r3 - */ - lis r3, 0 -BEGIN_FTR_SECTION - lis r3,HID0_DOZE@h -END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE) -BEGIN_FTR_SECTION - /* We must dynamically check for the NAP feature as it - * can be cleared by CPU init after the fixups are done - */ - lis r4,cur_cpu_spec@ha - lwz r4,cur_cpu_spec@l(r4) - lwz r4,CPU_SPEC_FEATURES(r4) - andi. r0,r4,CPU_FTR_CAN_NAP - beq 1f - /* Now check if user or arch enabled NAP mode */ - lis r4,powersave_nap@ha - lwz r4,powersave_nap@l(r4) - cmpwi 0,r4,0 - beq 1f - lis r3,HID0_NAP@h -1: -END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) - cmpwi 0,r3,0 - beqlr - - /* Clear MSR:EE */ - mfmsr r7 - rlwinm r0,r7,0,17,15 - mtmsr r0 - - /* Check current_thread_info()->flags */ - rlwinm r4,r1,0,0,18 - lwz r4,TI_FLAGS(r4) - andi. r0,r4,_TIF_NEED_RESCHED - beq 1f - mtmsr r7 /* out of line this ? */ - blr -1: - /* Some pre-nap cleanups needed on some CPUs */ - andis. r0,r3,HID0_NAP@h - beq 2f -BEGIN_FTR_SECTION - /* Disable L2 prefetch on some 745x and try to ensure - * L2 prefetch engines are idle. As explained by errata - * text, we can't be sure they are, we just hope very hard - * that well be enough (sic !). At least I noticed Apple - * doesn't even bother doing the dcbf's here... - */ - mfspr r4,SPRN_MSSCR0 - rlwinm r4,r4,0,0,29 - sync - mtspr SPRN_MSSCR0,r4 - sync - isync - lis r4,KERNELBASE@h - dcbf 0,r4 - dcbf 0,r4 - dcbf 0,r4 - dcbf 0,r4 -END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR) -#ifdef DEBUG - lis r6,nap_enter_count@ha - lwz r4,nap_enter_count@l(r6) - addi r4,r4,1 - stw r4,nap_enter_count@l(r6) -#endif -2: -BEGIN_FTR_SECTION - /* Go to low speed mode on some 750FX */ - lis r4,powersave_lowspeed@ha - lwz r4,powersave_lowspeed@l(r4) - cmpwi 0,r4,0 - beq 1f - mfspr r4,SPRN_HID1 - oris r4,r4,0x0001 - mtspr SPRN_HID1,r4 -1: -END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX) - - /* Go to NAP or DOZE now */ - mfspr r4,SPRN_HID0 - lis r5,(HID0_NAP|HID0_SLEEP)@h -BEGIN_FTR_SECTION - oris r5,r5,HID0_DOZE@h -END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE) - andc r4,r4,r5 - or r4,r4,r3 -BEGIN_FTR_SECTION - oris r4,r4,HID0_DPM@h /* that should be done once for all */ -END_FTR_SECTION_IFCLR(CPU_FTR_NO_DPM) - mtspr SPRN_HID0,r4 -BEGIN_FTR_SECTION - DSSALL - sync -END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) - ori r7,r7,MSR_EE /* Could be ommited (already set) */ - oris r7,r7,MSR_POW@h - sync - isync - mtmsr r7 - isync - sync - blr - -/* - * Return from NAP/DOZE mode, restore some CPU specific registers, - * we are called with DR/IR still off and r2 containing physical - * address of current. - */ -_GLOBAL(power_save_6xx_restore) - mfspr r11,SPRN_HID0 - rlwinm. r11,r11,0,10,8 /* Clear NAP & copy NAP bit !state to cr1 EQ */ - cror 4*cr1+eq,4*cr0+eq,4*cr0+eq -BEGIN_FTR_SECTION - rlwinm r11,r11,0,9,7 /* Clear DOZE */ -END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE) - mtspr SPRN_HID0, r11 - -#ifdef DEBUG - beq cr1,1f - lis r11,(nap_return_count-KERNELBASE)@ha - lwz r9,nap_return_count@l(r11) - addi r9,r9,1 - stw r9,nap_return_count@l(r11) -1: -#endif - - rlwinm r9,r1,0,0,18 - tophys(r9,r9) - lwz r11,TI_CPU(r9) - slwi r11,r11,2 - /* Todo make sure all these are in the same page - * and load r22 (@ha part + CPU offset) only once - */ -BEGIN_FTR_SECTION - beq cr1,1f - addis r9,r11,(nap_save_msscr0-KERNELBASE)@ha - lwz r9,nap_save_msscr0@l(r9) - mtspr SPRN_MSSCR0, r9 - sync - isync -1: -END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR) -BEGIN_FTR_SECTION - addis r9,r11,(nap_save_hid1-KERNELBASE)@ha - lwz r9,nap_save_hid1@l(r9) - mtspr SPRN_HID1, r9 -END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX) - b transfer_to_handler_cont - - .data - -_GLOBAL(nap_save_msscr0) - .space 4*NR_CPUS - -_GLOBAL(nap_save_hid1) - .space 4*NR_CPUS - -_GLOBAL(powersave_nap) - .long 0 -_GLOBAL(powersave_lowspeed) - .long 0 - -#ifdef DEBUG -_GLOBAL(nap_enter_count) - .space 4 -_GLOBAL(nap_return_count) - .space 4 -#endif diff --git a/arch/ppc/kernel/idle_power4.S b/arch/ppc/kernel/idle_power4.S deleted file mode 100644 index cc0d535365c..00000000000 --- a/arch/ppc/kernel/idle_power4.S +++ /dev/null @@ -1,91 +0,0 @@ -/* - * This file contains the power_save function for 6xx & 7xxx CPUs - * rewritten in assembler - * - * Warning ! This code assumes that if your machine has a 750fx - * it will have PLL 1 set to low speed mode (used during NAP/DOZE). - * if this is not the case some additional changes will have to - * be done to check a runtime var (a bit like powersave-nap) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#undef DEBUG - - .text - -/* - * Init idle, called at early CPU setup time from head.S for each CPU - * So nothing for now. Called with r24 containing CPU number and r3 - * reloc offset - */ - .globl init_idle_power4 -init_idle_power4: - blr - -/* - * Here is the power_save_6xx function. This could eventually be - * split into several functions & changing the function pointer - * depending on the various features. - */ - .globl power4_idle -power4_idle: -BEGIN_FTR_SECTION - blr -END_FTR_SECTION_IFCLR(CPU_FTR_CAN_NAP) - /* We must dynamically check for the NAP feature as it - * can be cleared by CPU init after the fixups are done - */ - lis r4,cur_cpu_spec@ha - lwz r4,cur_cpu_spec@l(r4) - lwz r4,CPU_SPEC_FEATURES(r4) - andi. r0,r4,CPU_FTR_CAN_NAP - beqlr - /* Now check if user or arch enabled NAP mode */ - lis r4,powersave_nap@ha - lwz r4,powersave_nap@l(r4) - cmpwi 0,r4,0 - beqlr - - /* Clear MSR:EE */ - mfmsr r7 - rlwinm r0,r7,0,17,15 - mtmsr r0 - - /* Check current_thread_info()->flags */ - rlwinm r4,r1,0,0,18 - lwz r4,TI_FLAGS(r4) - andi. r0,r4,_TIF_NEED_RESCHED - beq 1f - mtmsr r7 /* out of line this ? */ - blr -1: - /* Go to NAP now */ -BEGIN_FTR_SECTION - DSSALL - sync -END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) - ori r7,r7,MSR_EE /* Could be ommited (already set) */ - oris r7,r7,MSR_POW@h - sync - isync - mtmsr r7 - isync - sync - blr - - .globl powersave_nap -powersave_nap: - .long 0 -- cgit v1.2.3-18-g5258 From fbd7740fdfdf9475f92287a84085a1913541cd5d Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 27 Mar 2006 15:06:20 +1100 Subject: powerpc: Simplify pSeries idle loop Since pSeries only wants to do something different in the idle loop when there is no work to do, we can simplify the code by implementing ppc_md.power_save functions instead of complete idle loops. There are two versions: one for shared-processor partitions and one for dedicated- processor partitions. With this we also do a cede_processor() call on dedicated processor partitions if the poll_pending() call indicates that the hypervisor has work it wants to do. Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/setup.c | 190 ++++++++++++--------------------- 1 file changed, 70 insertions(+), 120 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 44d5c7fdcd9..213bf983242 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -81,8 +81,8 @@ extern void find_udbg_vterm(void); int fwnmi_active; /* TRUE if an FWNMI handler is present */ -static void pseries_shared_idle(void); -static void pseries_dedicated_idle(void); +static void pseries_shared_idle_sleep(void); +static void pseries_dedicated_idle_sleep(void); struct mpic *pSeries_mpic; @@ -236,14 +236,13 @@ static void __init pSeries_setup_arch(void) vpa_init(boot_cpuid); if (get_lppaca()->shared_proc) { printk(KERN_INFO "Using shared processor idle loop\n"); - ppc_md.idle_loop = pseries_shared_idle; + ppc_md.power_save = pseries_shared_idle_sleep; } else { printk(KERN_INFO "Using dedicated idle loop\n"); - ppc_md.idle_loop = pseries_dedicated_idle; + ppc_md.power_save = pseries_dedicated_idle_sleep; } } else { printk(KERN_INFO "Using default idle loop\n"); - ppc_md.idle_loop = default_idle; } if (firmware_has_feature(FW_FEATURE_LPAR)) @@ -393,136 +392,87 @@ static int __init pSeries_probe(int platform) DECLARE_PER_CPU(unsigned long, smt_snooze_delay); -static inline void dedicated_idle_sleep(unsigned int cpu) -{ - struct lppaca *plppaca = &lppaca[cpu ^ 1]; - - /* Only sleep if the other thread is not idle */ - if (!(plppaca->idle)) { - local_irq_disable(); - - /* - * We are about to sleep the thread and so wont be polling any - * more. - */ - clear_thread_flag(TIF_POLLING_NRFLAG); - smp_mb__after_clear_bit(); - - /* - * SMT dynamic mode. Cede will result in this thread going - * dormant, if the partner thread is still doing work. Thread - * wakes up if partner goes idle, an interrupt is presented, or - * a prod occurs. Returning from the cede enables external - * interrupts. - */ - if (!need_resched()) - cede_processor(); - else - local_irq_enable(); - set_thread_flag(TIF_POLLING_NRFLAG); - } else { - /* - * Give the HV an opportunity at the processor, since we are - * not doing any work. - */ - poll_pending(); - } -} - -static void pseries_dedicated_idle(void) +static void pseries_dedicated_idle_sleep(void) { unsigned int cpu = smp_processor_id(); unsigned long start_snooze; unsigned long *smt_snooze_delay = &__get_cpu_var(smt_snooze_delay); - set_thread_flag(TIF_POLLING_NRFLAG); - - while (1) { - /* - * Indicate to the HV that we are idle. Now would be - * a good time to find other work to dispatch. - */ - get_lppaca()->idle = 1; - - if (!need_resched()) { - start_snooze = get_tb() + - *smt_snooze_delay * tb_ticks_per_usec; - - while (!need_resched() && !cpu_is_offline(cpu)) { - ppc64_runlatch_off(); - - /* - * Go into low thread priority and possibly - * low power mode. - */ - HMT_low(); - HMT_very_low(); - - if (*smt_snooze_delay != 0 && - get_tb() > start_snooze) { - HMT_medium(); - dedicated_idle_sleep(cpu); - } - - } - - HMT_medium(); - } - get_lppaca()->idle = 0; - ppc64_runlatch_on(); + /* + * Indicate to the HV that we are idle. Now would be + * a good time to find other work to dispatch. + */ + get_lppaca()->idle = 1; - preempt_enable_no_resched(); - schedule(); - preempt_disable(); + /* + * We come in with interrupts disabled, and need_resched() + * has been checked recently. If we should poll for a little + * while, do so. + */ + if (*smt_snooze_delay) { + start_snooze = get_tb() + + *smt_snooze_delay * tb_ticks_per_usec; + local_irq_enable(); + set_thread_flag(TIF_POLLING_NRFLAG); - if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING) - cpu_die(); + while (get_tb() < start_snooze) { + if (need_resched() || cpu_is_offline(cpu)) + goto out; + ppc64_runlatch_off(); + HMT_low(); + HMT_very_low(); + } + + HMT_medium(); + clear_thread_flag(TIF_POLLING_NRFLAG); + smp_mb(); + local_irq_disable(); + if (need_resched() || cpu_is_offline(cpu)) + goto out; } + + /* + * Cede if the other thread is not idle, so that it can + * go single-threaded. If the other thread is idle, + * we ask the hypervisor if it has pending work it + * wants to do and cede if it does. Otherwise we keep + * polling in order to reduce interrupt latency. + * + * Doing the cede when the other thread is active will + * result in this thread going dormant, meaning the other + * thread gets to run in single-threaded (ST) mode, which + * is slightly faster than SMT mode with this thread at + * very low priority. The cede enables interrupts, which + * doesn't matter here. + */ + if (!lppaca[cpu ^ 1].idle || poll_pending() == H_Pending) + cede_processor(); + +out: + HMT_medium(); + get_lppaca()->idle = 0; } -static void pseries_shared_idle(void) +static void pseries_shared_idle_sleep(void) { unsigned int cpu = smp_processor_id(); - while (1) { - /* - * Indicate to the HV that we are idle. Now would be - * a good time to find other work to dispatch. - */ - get_lppaca()->idle = 1; - - while (!need_resched() && !cpu_is_offline(cpu)) { - local_irq_disable(); - ppc64_runlatch_off(); - - /* - * Yield the processor to the hypervisor. We return if - * an external interrupt occurs (which are driven prior - * to returning here) or if a prod occurs from another - * processor. When returning here, external interrupts - * are enabled. - * - * Check need_resched() again with interrupts disabled - * to avoid a race. - */ - if (!need_resched()) - cede_processor(); - else - local_irq_enable(); - - HMT_medium(); - } - - get_lppaca()->idle = 0; - ppc64_runlatch_on(); + /* + * Indicate to the HV that we are idle. Now would be + * a good time to find other work to dispatch. + */ + get_lppaca()->idle = 1; - preempt_enable_no_resched(); - schedule(); - preempt_disable(); + /* + * Yield the processor to the hypervisor. We return if + * an external interrupt occurs (which are driven prior + * to returning here) or if a prod occurs from another + * processor. When returning here, external interrupts + * are enabled. + */ + cede_processor(); - if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING) - cpu_die(); - } + get_lppaca()->idle = 0; } static int pSeries_pci_probe_mode(struct pci_bus *bus) -- cgit v1.2.3-18-g5258 From 0eb4cb9b16aba6d610a0716503b96d299b308d44 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 27 Mar 2006 15:22:28 +1100 Subject: powerpc: Move l2cr.S over to arch/powerpc No functional changes, but call it l2cr_6xx.S since it is specific to 6xx-family (including G3/750 and G4/74xx) processors. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/Makefile | 2 +- arch/powerpc/kernel/l2cr_6xx.S | 471 +++++++++++++++++++++++++++++++++++++++++ arch/ppc/kernel/Makefile | 4 +- arch/ppc/kernel/l2cr.S | 471 ----------------------------------------- 4 files changed, 474 insertions(+), 474 deletions(-) create mode 100644 arch/powerpc/kernel/l2cr_6xx.S delete mode 100644 arch/ppc/kernel/l2cr.S (limited to 'arch') diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index f2c47e90703..e7fddf1e42c 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -34,7 +34,7 @@ obj-$(CONFIG_IBMEBUS) += ibmebus.o obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o obj64-$(CONFIG_PPC_MULTIPLATFORM) += nvram_64.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o -obj-$(CONFIG_6xx) += idle_6xx.o +obj-$(CONFIG_6xx) += idle_6xx.o l2cr_6xx.o ifeq ($(CONFIG_PPC_MERGE),y) diff --git a/arch/powerpc/kernel/l2cr_6xx.S b/arch/powerpc/kernel/l2cr_6xx.S new file mode 100644 index 00000000000..d7f4e982b53 --- /dev/null +++ b/arch/powerpc/kernel/l2cr_6xx.S @@ -0,0 +1,471 @@ +/* + L2CR functions + Copyright © 1997-1998 by PowerLogix R & D, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ +/* + Thur, Dec. 12, 1998. + - First public release, contributed by PowerLogix. + *********** + Sat, Aug. 7, 1999. + - Terry: Made sure code disabled interrupts before running. (Previously + it was assumed interrupts were already disabled). + - Terry: Updated for tentative G4 support. 4MB of memory is now flushed + instead of 2MB. (Prob. only 3 is necessary). + - Terry: Updated for workaround to HID0[DPM] processor bug + during global invalidates. + *********** + Thu, July 13, 2000. + - Terry: Added isync to correct for an errata. + + 22 August 2001. + - DanM: Finally added the 7450 patch I've had for the past + several months. The L2CR is similar, but I'm going + to assume the user of this functions knows what they + are doing. + + Author: Terry Greeniaus (tgree@phys.ualberta.ca) + Please e-mail updates to this file to me, thanks! +*/ +#include +#include +#include +#include +#include +#include + +/* Usage: + + When setting the L2CR register, you must do a few special + things. If you are enabling the cache, you must perform a + global invalidate. If you are disabling the cache, you must + flush the cache contents first. This routine takes care of + doing these things. When first enabling the cache, make sure + you pass in the L2CR you want, as well as passing in the + global invalidate bit set. A global invalidate will only be + performed if the L2I bit is set in applyThis. When enabling + the cache, you should also set the L2E bit in applyThis. If + you want to modify the L2CR contents after the cache has been + enabled, the recommended procedure is to first call + __setL2CR(0) to disable the cache and then call it again with + the new values for L2CR. Examples: + + _setL2CR(0) - disables the cache + _setL2CR(0xB3A04000) - enables my G3 upgrade card: + - L2E set to turn on the cache + - L2SIZ set to 1MB + - L2CLK set to 1:1 + - L2RAM set to pipelined synchronous late-write + - L2I set to perform a global invalidation + - L2OH set to 0.5 nS + - L2DF set because this upgrade card + requires it + + A similar call should work for your card. You need to know + the correct setting for your card and then place them in the + fields I have outlined above. Other fields support optional + features, such as L2DO which caches only data, or L2TS which + causes cache pushes from the L1 cache to go to the L2 cache + instead of to main memory. + +IMPORTANT: + Starting with the 7450, the bits in this register have moved + or behave differently. The Enable, Parity Enable, Size, + and L2 Invalidate are the only bits that have not moved. + The size is read-only for these processors with internal L2 + cache, and the invalidate is a control as well as status. + -- Dan + +*/ +/* + * Summary: this procedure ignores the L2I bit in the value passed in, + * flushes the cache if it was already enabled, always invalidates the + * cache, then enables the cache if the L2E bit is set in the value + * passed in. + * -- paulus. + */ +_GLOBAL(_set_L2CR) + /* Make sure this is a 750 or 7400 chip */ +BEGIN_FTR_SECTION + li r3,-1 + blr +END_FTR_SECTION_IFCLR(CPU_FTR_L2CR) + + mflr r9 + + /* Stop DST streams */ +BEGIN_FTR_SECTION + DSSALL + sync +END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) + + /* Turn off interrupts and data relocation. */ + mfmsr r7 /* Save MSR in r7 */ + rlwinm r4,r7,0,17,15 + rlwinm r4,r4,0,28,26 /* Turn off DR bit */ + sync + mtmsr r4 + isync + + /* Before we perform the global invalidation, we must disable dynamic + * power management via HID0[DPM] to work around a processor bug where + * DPM can possibly interfere with the state machine in the processor + * that invalidates the L2 cache tags. + */ + mfspr r8,SPRN_HID0 /* Save HID0 in r8 */ + rlwinm r4,r8,0,12,10 /* Turn off HID0[DPM] */ + sync + mtspr SPRN_HID0,r4 /* Disable DPM */ + sync + + /* Get the current enable bit of the L2CR into r4 */ + mfspr r4,SPRN_L2CR + + /* Tweak some bits */ + rlwinm r5,r3,0,0,0 /* r5 contains the new enable bit */ + rlwinm r3,r3,0,11,9 /* Turn off the invalidate bit */ + rlwinm r3,r3,0,1,31 /* Turn off the enable bit */ + + /* Check to see if we need to flush */ + rlwinm. r4,r4,0,0,0 + beq 2f + + /* Flush the cache. First, read the first 4MB of memory (physical) to + * put new data in the cache. (Actually we only need + * the size of the L2 cache plus the size of the L1 cache, but 4MB will + * cover everything just to be safe). + */ + + /**** Might be a good idea to set L2DO here - to prevent instructions + from getting into the cache. But since we invalidate + the next time we enable the cache it doesn't really matter. + Don't do this unless you accomodate all processor variations. + The bit moved on the 7450..... + ****/ + +BEGIN_FTR_SECTION + /* Disable L2 prefetch on some 745x and try to ensure + * L2 prefetch engines are idle. As explained by errata + * text, we can't be sure they are, we just hope very hard + * that well be enough (sic !). At least I noticed Apple + * doesn't even bother doing the dcbf's here... + */ + mfspr r4,SPRN_MSSCR0 + rlwinm r4,r4,0,0,29 + sync + mtspr SPRN_MSSCR0,r4 + sync + isync + lis r4,KERNELBASE@h + dcbf 0,r4 + dcbf 0,r4 + dcbf 0,r4 + dcbf 0,r4 +END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450) + + /* TODO: use HW flush assist when available */ + + lis r4,0x0002 + mtctr r4 + li r4,0 +1: + lwzx r0,r0,r4 + addi r4,r4,32 /* Go to start of next cache line */ + bdnz 1b + isync + + /* Now, flush the first 4MB of memory */ + lis r4,0x0002 + mtctr r4 + li r4,0 + sync +1: + dcbf 0,r4 + addi r4,r4,32 /* Go to start of next cache line */ + bdnz 1b + +2: + /* Set up the L2CR configuration bits (and switch L2 off) */ + /* CPU errata: Make sure the mtspr below is already in the + * L1 icache + */ + b 20f + .balign L1_CACHE_BYTES +22: + sync + mtspr SPRN_L2CR,r3 + sync + b 23f +20: + b 21f +21: sync + isync + b 22b + +23: + /* Perform a global invalidation */ + oris r3,r3,0x0020 + sync + mtspr SPRN_L2CR,r3 + sync + isync /* For errata */ + +BEGIN_FTR_SECTION + /* On the 7450, we wait for the L2I bit to clear...... + */ +10: mfspr r3,SPRN_L2CR + andis. r4,r3,0x0020 + bne 10b + b 11f +END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450) + + /* Wait for the invalidation to complete */ +3: mfspr r3,SPRN_L2CR + rlwinm. r4,r3,0,31,31 + bne 3b + +11: rlwinm r3,r3,0,11,9 /* Turn off the L2I bit */ + sync + mtspr SPRN_L2CR,r3 + sync + + /* See if we need to enable the cache */ + cmplwi r5,0 + beq 4f + + /* Enable the cache */ + oris r3,r3,0x8000 + mtspr SPRN_L2CR,r3 + sync + + /* Enable L2 HW prefetch on 744x/745x */ +BEGIN_FTR_SECTION + mfspr r3,SPRN_MSSCR0 + ori r3,r3,3 + sync + mtspr SPRN_MSSCR0,r3 + sync + isync +END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450) +4: + + /* Restore HID0[DPM] to whatever it was before */ + sync + mtspr 1008,r8 + sync + + /* Restore MSR (restores EE and DR bits to original state) */ + SYNC + mtmsr r7 + isync + + mtlr r9 + blr + +_GLOBAL(_get_L2CR) + /* Return the L2CR contents */ + li r3,0 +BEGIN_FTR_SECTION + mfspr r3,SPRN_L2CR +END_FTR_SECTION_IFSET(CPU_FTR_L2CR) + blr + + +/* + * Here is a similar routine for dealing with the L3 cache + * on the 745x family of chips + */ + +_GLOBAL(_set_L3CR) + /* Make sure this is a 745x chip */ +BEGIN_FTR_SECTION + li r3,-1 + blr +END_FTR_SECTION_IFCLR(CPU_FTR_L3CR) + + /* Turn off interrupts and data relocation. */ + mfmsr r7 /* Save MSR in r7 */ + rlwinm r4,r7,0,17,15 + rlwinm r4,r4,0,28,26 /* Turn off DR bit */ + sync + mtmsr r4 + isync + + /* Stop DST streams */ + DSSALL + sync + + /* Get the current enable bit of the L3CR into r4 */ + mfspr r4,SPRN_L3CR + + /* Tweak some bits */ + rlwinm r5,r3,0,0,0 /* r5 contains the new enable bit */ + rlwinm r3,r3,0,22,20 /* Turn off the invalidate bit */ + rlwinm r3,r3,0,2,31 /* Turn off the enable & PE bits */ + rlwinm r3,r3,0,5,3 /* Turn off the clken bit */ + /* Check to see if we need to flush */ + rlwinm. r4,r4,0,0,0 + beq 2f + + /* Flush the cache. + */ + + /* TODO: use HW flush assist */ + + lis r4,0x0008 + mtctr r4 + li r4,0 +1: + lwzx r0,r0,r4 + dcbf 0,r4 + addi r4,r4,32 /* Go to start of next cache line */ + bdnz 1b + +2: + /* Set up the L3CR configuration bits (and switch L3 off) */ + sync + mtspr SPRN_L3CR,r3 + sync + + oris r3,r3,L3CR_L3RES@h /* Set reserved bit 5 */ + mtspr SPRN_L3CR,r3 + sync + oris r3,r3,L3CR_L3CLKEN@h /* Set clken */ + mtspr SPRN_L3CR,r3 + sync + + /* Wait for stabilize */ + li r0,256 + mtctr r0 +1: bdnz 1b + + /* Perform a global invalidation */ + ori r3,r3,0x0400 + sync + mtspr SPRN_L3CR,r3 + sync + isync + + /* We wait for the L3I bit to clear...... */ +10: mfspr r3,SPRN_L3CR + andi. r4,r3,0x0400 + bne 10b + + /* Clear CLKEN */ + rlwinm r3,r3,0,5,3 /* Turn off the clken bit */ + mtspr SPRN_L3CR,r3 + sync + + /* Wait for stabilize */ + li r0,256 + mtctr r0 +1: bdnz 1b + + /* See if we need to enable the cache */ + cmplwi r5,0 + beq 4f + + /* Enable the cache */ + oris r3,r3,(L3CR_L3E | L3CR_L3CLKEN)@h + mtspr SPRN_L3CR,r3 + sync + + /* Wait for stabilize */ + li r0,256 + mtctr r0 +1: bdnz 1b + + /* Restore MSR (restores EE and DR bits to original state) */ +4: SYNC + mtmsr r7 + isync + blr + +_GLOBAL(_get_L3CR) + /* Return the L3CR contents */ + li r3,0 +BEGIN_FTR_SECTION + mfspr r3,SPRN_L3CR +END_FTR_SECTION_IFSET(CPU_FTR_L3CR) + blr + +/* --- End of PowerLogix code --- + */ + + +/* flush_disable_L1() - Flush and disable L1 cache + * + * clobbers r0, r3, ctr, cr0 + * Must be called with interrupts disabled and MMU enabled. + */ +_GLOBAL(__flush_disable_L1) + /* Stop pending alitvec streams and memory accesses */ +BEGIN_FTR_SECTION + DSSALL +END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) + sync + + /* Load counter to 0x4000 cache lines (512k) and + * load cache with datas + */ + li r3,0x4000 /* 512kB / 32B */ + mtctr r3 + lis r3,KERNELBASE@h +1: + lwz r0,0(r3) + addi r3,r3,0x0020 /* Go to start of next cache line */ + bdnz 1b + isync + sync + + /* Now flush those cache lines */ + li r3,0x4000 /* 512kB / 32B */ + mtctr r3 + lis r3,KERNELBASE@h +1: + dcbf 0,r3 + addi r3,r3,0x0020 /* Go to start of next cache line */ + bdnz 1b + sync + + /* We can now disable the L1 cache (HID0:DCE, HID0:ICE) */ + mfspr r3,SPRN_HID0 + rlwinm r3,r3,0,18,15 + mtspr SPRN_HID0,r3 + sync + isync + blr + +/* inval_enable_L1 - Invalidate and enable L1 cache + * + * Assumes L1 is already disabled and MSR:EE is off + * + * clobbers r3 + */ +_GLOBAL(__inval_enable_L1) + /* Enable and then Flash inval the instruction & data cache */ + mfspr r3,SPRN_HID0 + ori r3,r3, HID0_ICE|HID0_ICFI|HID0_DCE|HID0_DCI + sync + isync + mtspr SPRN_HID0,r3 + xori r3,r3, HID0_ICFI|HID0_DCI + mtspr SPRN_HID0,r3 + sync + + blr + + diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index 1b2c7458a3d..3d50a268683 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile @@ -13,7 +13,7 @@ extra-y += vmlinux.lds obj-y := entry.o traps.o time.o misc.o \ setup.o \ ppc_htab.o -obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o +obj-$(CONFIG_6xx) += cpu_setup_6xx.o obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o obj-$(CONFIG_MODULES) += module.o ppc_ksyms.o obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-mapping.o @@ -34,7 +34,7 @@ endif # These are here while we do the architecture merge else -obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o +obj-$(CONFIG_6xx) += cpu_setup_6xx.o obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-mapping.o diff --git a/arch/ppc/kernel/l2cr.S b/arch/ppc/kernel/l2cr.S deleted file mode 100644 index d7f4e982b53..00000000000 --- a/arch/ppc/kernel/l2cr.S +++ /dev/null @@ -1,471 +0,0 @@ -/* - L2CR functions - Copyright © 1997-1998 by PowerLogix R & D, Inc. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ -/* - Thur, Dec. 12, 1998. - - First public release, contributed by PowerLogix. - *********** - Sat, Aug. 7, 1999. - - Terry: Made sure code disabled interrupts before running. (Previously - it was assumed interrupts were already disabled). - - Terry: Updated for tentative G4 support. 4MB of memory is now flushed - instead of 2MB. (Prob. only 3 is necessary). - - Terry: Updated for workaround to HID0[DPM] processor bug - during global invalidates. - *********** - Thu, July 13, 2000. - - Terry: Added isync to correct for an errata. - - 22 August 2001. - - DanM: Finally added the 7450 patch I've had for the past - several months. The L2CR is similar, but I'm going - to assume the user of this functions knows what they - are doing. - - Author: Terry Greeniaus (tgree@phys.ualberta.ca) - Please e-mail updates to this file to me, thanks! -*/ -#include -#include -#include -#include -#include -#include - -/* Usage: - - When setting the L2CR register, you must do a few special - things. If you are enabling the cache, you must perform a - global invalidate. If you are disabling the cache, you must - flush the cache contents first. This routine takes care of - doing these things. When first enabling the cache, make sure - you pass in the L2CR you want, as well as passing in the - global invalidate bit set. A global invalidate will only be - performed if the L2I bit is set in applyThis. When enabling - the cache, you should also set the L2E bit in applyThis. If - you want to modify the L2CR contents after the cache has been - enabled, the recommended procedure is to first call - __setL2CR(0) to disable the cache and then call it again with - the new values for L2CR. Examples: - - _setL2CR(0) - disables the cache - _setL2CR(0xB3A04000) - enables my G3 upgrade card: - - L2E set to turn on the cache - - L2SIZ set to 1MB - - L2CLK set to 1:1 - - L2RAM set to pipelined synchronous late-write - - L2I set to perform a global invalidation - - L2OH set to 0.5 nS - - L2DF set because this upgrade card - requires it - - A similar call should work for your card. You need to know - the correct setting for your card and then place them in the - fields I have outlined above. Other fields support optional - features, such as L2DO which caches only data, or L2TS which - causes cache pushes from the L1 cache to go to the L2 cache - instead of to main memory. - -IMPORTANT: - Starting with the 7450, the bits in this register have moved - or behave differently. The Enable, Parity Enable, Size, - and L2 Invalidate are the only bits that have not moved. - The size is read-only for these processors with internal L2 - cache, and the invalidate is a control as well as status. - -- Dan - -*/ -/* - * Summary: this procedure ignores the L2I bit in the value passed in, - * flushes the cache if it was already enabled, always invalidates the - * cache, then enables the cache if the L2E bit is set in the value - * passed in. - * -- paulus. - */ -_GLOBAL(_set_L2CR) - /* Make sure this is a 750 or 7400 chip */ -BEGIN_FTR_SECTION - li r3,-1 - blr -END_FTR_SECTION_IFCLR(CPU_FTR_L2CR) - - mflr r9 - - /* Stop DST streams */ -BEGIN_FTR_SECTION - DSSALL - sync -END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) - - /* Turn off interrupts and data relocation. */ - mfmsr r7 /* Save MSR in r7 */ - rlwinm r4,r7,0,17,15 - rlwinm r4,r4,0,28,26 /* Turn off DR bit */ - sync - mtmsr r4 - isync - - /* Before we perform the global invalidation, we must disable dynamic - * power management via HID0[DPM] to work around a processor bug where - * DPM can possibly interfere with the state machine in the processor - * that invalidates the L2 cache tags. - */ - mfspr r8,SPRN_HID0 /* Save HID0 in r8 */ - rlwinm r4,r8,0,12,10 /* Turn off HID0[DPM] */ - sync - mtspr SPRN_HID0,r4 /* Disable DPM */ - sync - - /* Get the current enable bit of the L2CR into r4 */ - mfspr r4,SPRN_L2CR - - /* Tweak some bits */ - rlwinm r5,r3,0,0,0 /* r5 contains the new enable bit */ - rlwinm r3,r3,0,11,9 /* Turn off the invalidate bit */ - rlwinm r3,r3,0,1,31 /* Turn off the enable bit */ - - /* Check to see if we need to flush */ - rlwinm. r4,r4,0,0,0 - beq 2f - - /* Flush the cache. First, read the first 4MB of memory (physical) to - * put new data in the cache. (Actually we only need - * the size of the L2 cache plus the size of the L1 cache, but 4MB will - * cover everything just to be safe). - */ - - /**** Might be a good idea to set L2DO here - to prevent instructions - from getting into the cache. But since we invalidate - the next time we enable the cache it doesn't really matter. - Don't do this unless you accomodate all processor variations. - The bit moved on the 7450..... - ****/ - -BEGIN_FTR_SECTION - /* Disable L2 prefetch on some 745x and try to ensure - * L2 prefetch engines are idle. As explained by errata - * text, we can't be sure they are, we just hope very hard - * that well be enough (sic !). At least I noticed Apple - * doesn't even bother doing the dcbf's here... - */ - mfspr r4,SPRN_MSSCR0 - rlwinm r4,r4,0,0,29 - sync - mtspr SPRN_MSSCR0,r4 - sync - isync - lis r4,KERNELBASE@h - dcbf 0,r4 - dcbf 0,r4 - dcbf 0,r4 - dcbf 0,r4 -END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450) - - /* TODO: use HW flush assist when available */ - - lis r4,0x0002 - mtctr r4 - li r4,0 -1: - lwzx r0,r0,r4 - addi r4,r4,32 /* Go to start of next cache line */ - bdnz 1b - isync - - /* Now, flush the first 4MB of memory */ - lis r4,0x0002 - mtctr r4 - li r4,0 - sync -1: - dcbf 0,r4 - addi r4,r4,32 /* Go to start of next cache line */ - bdnz 1b - -2: - /* Set up the L2CR configuration bits (and switch L2 off) */ - /* CPU errata: Make sure the mtspr below is already in the - * L1 icache - */ - b 20f - .balign L1_CACHE_BYTES -22: - sync - mtspr SPRN_L2CR,r3 - sync - b 23f -20: - b 21f -21: sync - isync - b 22b - -23: - /* Perform a global invalidation */ - oris r3,r3,0x0020 - sync - mtspr SPRN_L2CR,r3 - sync - isync /* For errata */ - -BEGIN_FTR_SECTION - /* On the 7450, we wait for the L2I bit to clear...... - */ -10: mfspr r3,SPRN_L2CR - andis. r4,r3,0x0020 - bne 10b - b 11f -END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450) - - /* Wait for the invalidation to complete */ -3: mfspr r3,SPRN_L2CR - rlwinm. r4,r3,0,31,31 - bne 3b - -11: rlwinm r3,r3,0,11,9 /* Turn off the L2I bit */ - sync - mtspr SPRN_L2CR,r3 - sync - - /* See if we need to enable the cache */ - cmplwi r5,0 - beq 4f - - /* Enable the cache */ - oris r3,r3,0x8000 - mtspr SPRN_L2CR,r3 - sync - - /* Enable L2 HW prefetch on 744x/745x */ -BEGIN_FTR_SECTION - mfspr r3,SPRN_MSSCR0 - ori r3,r3,3 - sync - mtspr SPRN_MSSCR0,r3 - sync - isync -END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450) -4: - - /* Restore HID0[DPM] to whatever it was before */ - sync - mtspr 1008,r8 - sync - - /* Restore MSR (restores EE and DR bits to original state) */ - SYNC - mtmsr r7 - isync - - mtlr r9 - blr - -_GLOBAL(_get_L2CR) - /* Return the L2CR contents */ - li r3,0 -BEGIN_FTR_SECTION - mfspr r3,SPRN_L2CR -END_FTR_SECTION_IFSET(CPU_FTR_L2CR) - blr - - -/* - * Here is a similar routine for dealing with the L3 cache - * on the 745x family of chips - */ - -_GLOBAL(_set_L3CR) - /* Make sure this is a 745x chip */ -BEGIN_FTR_SECTION - li r3,-1 - blr -END_FTR_SECTION_IFCLR(CPU_FTR_L3CR) - - /* Turn off interrupts and data relocation. */ - mfmsr r7 /* Save MSR in r7 */ - rlwinm r4,r7,0,17,15 - rlwinm r4,r4,0,28,26 /* Turn off DR bit */ - sync - mtmsr r4 - isync - - /* Stop DST streams */ - DSSALL - sync - - /* Get the current enable bit of the L3CR into r4 */ - mfspr r4,SPRN_L3CR - - /* Tweak some bits */ - rlwinm r5,r3,0,0,0 /* r5 contains the new enable bit */ - rlwinm r3,r3,0,22,20 /* Turn off the invalidate bit */ - rlwinm r3,r3,0,2,31 /* Turn off the enable & PE bits */ - rlwinm r3,r3,0,5,3 /* Turn off the clken bit */ - /* Check to see if we need to flush */ - rlwinm. r4,r4,0,0,0 - beq 2f - - /* Flush the cache. - */ - - /* TODO: use HW flush assist */ - - lis r4,0x0008 - mtctr r4 - li r4,0 -1: - lwzx r0,r0,r4 - dcbf 0,r4 - addi r4,r4,32 /* Go to start of next cache line */ - bdnz 1b - -2: - /* Set up the L3CR configuration bits (and switch L3 off) */ - sync - mtspr SPRN_L3CR,r3 - sync - - oris r3,r3,L3CR_L3RES@h /* Set reserved bit 5 */ - mtspr SPRN_L3CR,r3 - sync - oris r3,r3,L3CR_L3CLKEN@h /* Set clken */ - mtspr SPRN_L3CR,r3 - sync - - /* Wait for stabilize */ - li r0,256 - mtctr r0 -1: bdnz 1b - - /* Perform a global invalidation */ - ori r3,r3,0x0400 - sync - mtspr SPRN_L3CR,r3 - sync - isync - - /* We wait for the L3I bit to clear...... */ -10: mfspr r3,SPRN_L3CR - andi. r4,r3,0x0400 - bne 10b - - /* Clear CLKEN */ - rlwinm r3,r3,0,5,3 /* Turn off the clken bit */ - mtspr SPRN_L3CR,r3 - sync - - /* Wait for stabilize */ - li r0,256 - mtctr r0 -1: bdnz 1b - - /* See if we need to enable the cache */ - cmplwi r5,0 - beq 4f - - /* Enable the cache */ - oris r3,r3,(L3CR_L3E | L3CR_L3CLKEN)@h - mtspr SPRN_L3CR,r3 - sync - - /* Wait for stabilize */ - li r0,256 - mtctr r0 -1: bdnz 1b - - /* Restore MSR (restores EE and DR bits to original state) */ -4: SYNC - mtmsr r7 - isync - blr - -_GLOBAL(_get_L3CR) - /* Return the L3CR contents */ - li r3,0 -BEGIN_FTR_SECTION - mfspr r3,SPRN_L3CR -END_FTR_SECTION_IFSET(CPU_FTR_L3CR) - blr - -/* --- End of PowerLogix code --- - */ - - -/* flush_disable_L1() - Flush and disable L1 cache - * - * clobbers r0, r3, ctr, cr0 - * Must be called with interrupts disabled and MMU enabled. - */ -_GLOBAL(__flush_disable_L1) - /* Stop pending alitvec streams and memory accesses */ -BEGIN_FTR_SECTION - DSSALL -END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) - sync - - /* Load counter to 0x4000 cache lines (512k) and - * load cache with datas - */ - li r3,0x4000 /* 512kB / 32B */ - mtctr r3 - lis r3,KERNELBASE@h -1: - lwz r0,0(r3) - addi r3,r3,0x0020 /* Go to start of next cache line */ - bdnz 1b - isync - sync - - /* Now flush those cache lines */ - li r3,0x4000 /* 512kB / 32B */ - mtctr r3 - lis r3,KERNELBASE@h -1: - dcbf 0,r3 - addi r3,r3,0x0020 /* Go to start of next cache line */ - bdnz 1b - sync - - /* We can now disable the L1 cache (HID0:DCE, HID0:ICE) */ - mfspr r3,SPRN_HID0 - rlwinm r3,r3,0,18,15 - mtspr SPRN_HID0,r3 - sync - isync - blr - -/* inval_enable_L1 - Invalidate and enable L1 cache - * - * Assumes L1 is already disabled and MSR:EE is off - * - * clobbers r3 - */ -_GLOBAL(__inval_enable_L1) - /* Enable and then Flash inval the instruction & data cache */ - mfspr r3,SPRN_HID0 - ori r3,r3, HID0_ICE|HID0_ICFI|HID0_DCE|HID0_DCI - sync - isync - mtspr SPRN_HID0,r3 - xori r3,r3, HID0_ICFI|HID0_DCI - mtspr SPRN_HID0,r3 - sync - - blr - - -- cgit v1.2.3-18-g5258 From 9b781727fd1062671afa144b93e8c69b14bcac4d Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 27 Mar 2006 19:15:26 +1100 Subject: powerpc: Move cpu_setup_6xx.S and temp.c over to arch/powerpc Also renamed temp.c to tau_6xx.c (for thermal assist unit) and updated the Kconfig option description and help text for CONFIG_TAU. Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 4 +- arch/powerpc/kernel/Makefile | 3 +- arch/powerpc/kernel/cpu_setup_6xx.S | 474 ++++++++++++++++++++++++++++++++++++ arch/powerpc/kernel/tau_6xx.c | 271 +++++++++++++++++++++ arch/ppc/kernel/Makefile | 4 - arch/ppc/kernel/cpu_setup_6xx.S | 474 ------------------------------------ arch/ppc/kernel/temp.c | 271 --------------------- 7 files changed, 749 insertions(+), 752 deletions(-) create mode 100644 arch/powerpc/kernel/cpu_setup_6xx.S create mode 100644 arch/powerpc/kernel/tau_6xx.c delete mode 100644 arch/ppc/kernel/cpu_setup_6xx.S delete mode 100644 arch/ppc/kernel/temp.c (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index a433b7126d3..2cdc35ce804 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -491,7 +491,7 @@ config PPC601_SYNC_FIX If in doubt, say Y here. config TAU - bool "Thermal Management Support" + bool "On-chip CPU temperature sensor support" depends on 6xx help G3 and G4 processors have an on-chip temperature sensor called the @@ -500,7 +500,7 @@ config TAU on-die temperature in /proc/cpuinfo if the cpu supports it. Unfortunately, on some chip revisions, this sensor is very inaccurate - and in some cases, does not work at all, so don't assume the cpu + and in many cases, does not work at all, so don't assume the cpu temp is actually what /proc/cpuinfo says it is. config TAU_INT diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index e7fddf1e42c..754c227835b 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -34,7 +34,8 @@ obj-$(CONFIG_IBMEBUS) += ibmebus.o obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o obj64-$(CONFIG_PPC_MULTIPLATFORM) += nvram_64.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o -obj-$(CONFIG_6xx) += idle_6xx.o l2cr_6xx.o +obj-$(CONFIG_6xx) += idle_6xx.o l2cr_6xx.o cpu_setup_6xx.o +obj-$(CONFIG_TAU) += tau_6xx.o ifeq ($(CONFIG_PPC_MERGE),y) diff --git a/arch/powerpc/kernel/cpu_setup_6xx.S b/arch/powerpc/kernel/cpu_setup_6xx.S new file mode 100644 index 00000000000..55ed7716636 --- /dev/null +++ b/arch/powerpc/kernel/cpu_setup_6xx.S @@ -0,0 +1,474 @@ +/* + * This file contains low level CPU setup functions. + * Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include + +_GLOBAL(__setup_cpu_603) + b setup_common_caches +_GLOBAL(__setup_cpu_604) + mflr r4 + bl setup_common_caches + bl setup_604_hid0 + mtlr r4 + blr +_GLOBAL(__setup_cpu_750) + mflr r4 + bl __init_fpu_registers + bl setup_common_caches + bl setup_750_7400_hid0 + mtlr r4 + blr +_GLOBAL(__setup_cpu_750cx) + mflr r4 + bl __init_fpu_registers + bl setup_common_caches + bl setup_750_7400_hid0 + bl setup_750cx + mtlr r4 + blr +_GLOBAL(__setup_cpu_750fx) + mflr r4 + bl __init_fpu_registers + bl setup_common_caches + bl setup_750_7400_hid0 + bl setup_750fx + mtlr r4 + blr +_GLOBAL(__setup_cpu_7400) + mflr r4 + bl __init_fpu_registers + bl setup_7400_workarounds + bl setup_common_caches + bl setup_750_7400_hid0 + mtlr r4 + blr +_GLOBAL(__setup_cpu_7410) + mflr r4 + bl __init_fpu_registers + bl setup_7410_workarounds + bl setup_common_caches + bl setup_750_7400_hid0 + li r3,0 + mtspr SPRN_L2CR2,r3 + mtlr r4 + blr +_GLOBAL(__setup_cpu_745x) + mflr r4 + bl setup_common_caches + bl setup_745x_specifics + mtlr r4 + blr + +/* Enable caches for 603's, 604, 750 & 7400 */ +setup_common_caches: + mfspr r11,SPRN_HID0 + andi. r0,r11,HID0_DCE + ori r11,r11,HID0_ICE|HID0_DCE + ori r8,r11,HID0_ICFI + bne 1f /* don't invalidate the D-cache */ + ori r8,r8,HID0_DCI /* unless it wasn't enabled */ +1: sync + mtspr SPRN_HID0,r8 /* enable and invalidate caches */ + sync + mtspr SPRN_HID0,r11 /* enable caches */ + sync + isync + blr + +/* 604, 604e, 604ev, ... + * Enable superscalar execution & branch history table + */ +setup_604_hid0: + mfspr r11,SPRN_HID0 + ori r11,r11,HID0_SIED|HID0_BHTE + ori r8,r11,HID0_BTCD + sync + mtspr SPRN_HID0,r8 /* flush branch target address cache */ + sync /* on 604e/604r */ + mtspr SPRN_HID0,r11 + sync + isync + blr + +/* 7400 <= rev 2.7 and 7410 rev = 1.0 suffer from some + * erratas we work around here. + * Moto MPC710CE.pdf describes them, those are errata + * #3, #4 and #5 + * Note that we assume the firmware didn't choose to + * apply other workarounds (there are other ones documented + * in the .pdf). It appear that Apple firmware only works + * around #3 and with the same fix we use. We may want to + * check if the CPU is using 60x bus mode in which case + * the workaround for errata #4 is useless. Also, we may + * want to explicitely clear HID0_NOPDST as this is not + * needed once we have applied workaround #5 (though it's + * not set by Apple's firmware at least). + */ +setup_7400_workarounds: + mfpvr r3 + rlwinm r3,r3,0,20,31 + cmpwi 0,r3,0x0207 + ble 1f + blr +setup_7410_workarounds: + mfpvr r3 + rlwinm r3,r3,0,20,31 + cmpwi 0,r3,0x0100 + bnelr +1: + mfspr r11,SPRN_MSSSR0 + /* Errata #3: Set L1OPQ_SIZE to 0x10 */ + rlwinm r11,r11,0,9,6 + oris r11,r11,0x0100 + /* Errata #4: Set L2MQ_SIZE to 1 (check for MPX mode first ?) */ + oris r11,r11,0x0002 + /* Errata #5: Set DRLT_SIZE to 0x01 */ + rlwinm r11,r11,0,5,2 + oris r11,r11,0x0800 + sync + mtspr SPRN_MSSSR0,r11 + sync + isync + blr + +/* 740/750/7400/7410 + * Enable Store Gathering (SGE), Address Brodcast (ABE), + * Branch History Table (BHTE), Branch Target ICache (BTIC) + * Dynamic Power Management (DPM), Speculative (SPD) + * Clear Instruction cache throttling (ICTC) + */ +setup_750_7400_hid0: + mfspr r11,SPRN_HID0 + ori r11,r11,HID0_SGE | HID0_ABE | HID0_BHTE | HID0_BTIC + oris r11,r11,HID0_DPM@h +BEGIN_FTR_SECTION + xori r11,r11,HID0_BTIC +END_FTR_SECTION_IFSET(CPU_FTR_NO_BTIC) +BEGIN_FTR_SECTION + xoris r11,r11,HID0_DPM@h /* disable dynamic power mgmt */ +END_FTR_SECTION_IFSET(CPU_FTR_NO_DPM) + li r3,HID0_SPD + andc r11,r11,r3 /* clear SPD: enable speculative */ + li r3,0 + mtspr SPRN_ICTC,r3 /* Instruction Cache Throttling off */ + isync + mtspr SPRN_HID0,r11 + sync + isync + blr + +/* 750cx specific + * Looks like we have to disable NAP feature for some PLL settings... + * (waiting for confirmation) + */ +setup_750cx: + mfspr r10, SPRN_HID1 + rlwinm r10,r10,4,28,31 + cmpwi cr0,r10,7 + cmpwi cr1,r10,9 + cmpwi cr2,r10,11 + cror 4*cr0+eq,4*cr0+eq,4*cr1+eq + cror 4*cr0+eq,4*cr0+eq,4*cr2+eq + bnelr + lwz r6,CPU_SPEC_FEATURES(r5) + li r7,CPU_FTR_CAN_NAP + andc r6,r6,r7 + stw r6,CPU_SPEC_FEATURES(r5) + blr + +/* 750fx specific + */ +setup_750fx: + blr + +/* MPC 745x + * Enable Store Gathering (SGE), Branch Folding (FOLD) + * Branch History Table (BHTE), Branch Target ICache (BTIC) + * Dynamic Power Management (DPM), Speculative (SPD) + * Ensure our data cache instructions really operate. + * Timebase has to be running or we wouldn't have made it here, + * just ensure we don't disable it. + * Clear Instruction cache throttling (ICTC) + * Enable L2 HW prefetch + */ +setup_745x_specifics: + /* We check for the presence of an L3 cache setup by + * the firmware. If any, we disable NAP capability as + * it's known to be bogus on rev 2.1 and earlier + */ + mfspr r11,SPRN_L3CR + andis. r11,r11,L3CR_L3E@h + beq 1f + lwz r6,CPU_SPEC_FEATURES(r5) + andi. r0,r6,CPU_FTR_L3_DISABLE_NAP + beq 1f + li r7,CPU_FTR_CAN_NAP + andc r6,r6,r7 + stw r6,CPU_SPEC_FEATURES(r5) +1: + mfspr r11,SPRN_HID0 + + /* All of the bits we have to set..... + */ + ori r11,r11,HID0_SGE | HID0_FOLD | HID0_BHTE + ori r11,r11,HID0_LRSTK | HID0_BTIC + oris r11,r11,HID0_DPM@h +BEGIN_FTR_SECTION + xori r11,r11,HID0_BTIC +END_FTR_SECTION_IFSET(CPU_FTR_NO_BTIC) +BEGIN_FTR_SECTION + xoris r11,r11,HID0_DPM@h /* disable dynamic power mgmt */ +END_FTR_SECTION_IFSET(CPU_FTR_NO_DPM) + + /* All of the bits we have to clear.... + */ + li r3,HID0_SPD | HID0_NOPDST | HID0_NOPTI + andc r11,r11,r3 /* clear SPD: enable speculative */ + li r3,0 + + mtspr SPRN_ICTC,r3 /* Instruction Cache Throttling off */ + isync + mtspr SPRN_HID0,r11 + sync + isync + + /* Enable L2 HW prefetch, if L2 is enabled + */ + mfspr r3,SPRN_L2CR + andis. r3,r3,L2CR_L2E@h + beqlr + mfspr r3,SPRN_MSSCR0 + ori r3,r3,3 + sync + mtspr SPRN_MSSCR0,r3 + sync + isync + blr + +/* + * Initialize the FPU registers. This is needed to work around an errata + * in some 750 cpus where using a not yet initialized FPU register after + * power on reset may hang the CPU + */ +_GLOBAL(__init_fpu_registers) + mfmsr r10 + ori r11,r10,MSR_FP + mtmsr r11 + isync + addis r9,r3,empty_zero_page@ha + addi r9,r9,empty_zero_page@l + REST_32FPRS(0,r9) + sync + mtmsr r10 + isync + blr + + +/* Definitions for the table use to save CPU states */ +#define CS_HID0 0 +#define CS_HID1 4 +#define CS_HID2 8 +#define CS_MSSCR0 12 +#define CS_MSSSR0 16 +#define CS_ICTRL 20 +#define CS_LDSTCR 24 +#define CS_LDSTDB 28 +#define CS_SIZE 32 + + .data + .balign L1_CACHE_BYTES +cpu_state_storage: + .space CS_SIZE + .balign L1_CACHE_BYTES,0 + .text + +/* Called in normal context to backup CPU 0 state. This + * does not include cache settings. This function is also + * called for machine sleep. This does not include the MMU + * setup, BATs, etc... but rather the "special" registers + * like HID0, HID1, MSSCR0, etc... + */ +_GLOBAL(__save_cpu_setup) + /* Some CR fields are volatile, we back it up all */ + mfcr r7 + + /* Get storage ptr */ + lis r5,cpu_state_storage@h + ori r5,r5,cpu_state_storage@l + + /* Save HID0 (common to all CONFIG_6xx cpus) */ + mfspr r3,SPRN_HID0 + stw r3,CS_HID0(r5) + + /* Now deal with CPU type dependent registers */ + mfspr r3,SPRN_PVR + srwi r3,r3,16 + cmplwi cr0,r3,0x8000 /* 7450 */ + cmplwi cr1,r3,0x000c /* 7400 */ + cmplwi cr2,r3,0x800c /* 7410 */ + cmplwi cr3,r3,0x8001 /* 7455 */ + cmplwi cr4,r3,0x8002 /* 7457 */ + cmplwi cr5,r3,0x8003 /* 7447A */ + cmplwi cr6,r3,0x7000 /* 750FX */ + cmplwi cr7,r3,0x8004 /* 7448 */ + /* cr1 is 7400 || 7410 */ + cror 4*cr1+eq,4*cr1+eq,4*cr2+eq + /* cr0 is 74xx */ + cror 4*cr0+eq,4*cr0+eq,4*cr3+eq + cror 4*cr0+eq,4*cr0+eq,4*cr4+eq + cror 4*cr0+eq,4*cr0+eq,4*cr1+eq + cror 4*cr0+eq,4*cr0+eq,4*cr5+eq + cror 4*cr0+eq,4*cr0+eq,4*cr7+eq + bne 1f + /* Backup 74xx specific regs */ + mfspr r4,SPRN_MSSCR0 + stw r4,CS_MSSCR0(r5) + mfspr r4,SPRN_MSSSR0 + stw r4,CS_MSSSR0(r5) + beq cr1,1f + /* Backup 745x specific registers */ + mfspr r4,SPRN_HID1 + stw r4,CS_HID1(r5) + mfspr r4,SPRN_ICTRL + stw r4,CS_ICTRL(r5) + mfspr r4,SPRN_LDSTCR + stw r4,CS_LDSTCR(r5) + mfspr r4,SPRN_LDSTDB + stw r4,CS_LDSTDB(r5) +1: + bne cr6,1f + /* Backup 750FX specific registers */ + mfspr r4,SPRN_HID1 + stw r4,CS_HID1(r5) + /* If rev 2.x, backup HID2 */ + mfspr r3,SPRN_PVR + andi. r3,r3,0xff00 + cmpwi cr0,r3,0x0200 + bne 1f + mfspr r4,SPRN_HID2 + stw r4,CS_HID2(r5) +1: + mtcr r7 + blr + +/* Called with no MMU context (typically MSR:IR/DR off) to + * restore CPU state as backed up by the previous + * function. This does not include cache setting + */ +_GLOBAL(__restore_cpu_setup) + /* Some CR fields are volatile, we back it up all */ + mfcr r7 + + /* Get storage ptr */ + lis r5,(cpu_state_storage-KERNELBASE)@h + ori r5,r5,cpu_state_storage@l + + /* Restore HID0 */ + lwz r3,CS_HID0(r5) + sync + isync + mtspr SPRN_HID0,r3 + sync + isync + + /* Now deal with CPU type dependent registers */ + mfspr r3,SPRN_PVR + srwi r3,r3,16 + cmplwi cr0,r3,0x8000 /* 7450 */ + cmplwi cr1,r3,0x000c /* 7400 */ + cmplwi cr2,r3,0x800c /* 7410 */ + cmplwi cr3,r3,0x8001 /* 7455 */ + cmplwi cr4,r3,0x8002 /* 7457 */ + cmplwi cr5,r3,0x8003 /* 7447A */ + cmplwi cr6,r3,0x7000 /* 750FX */ + cmplwi cr7,r3,0x8004 /* 7448 */ + /* cr1 is 7400 || 7410 */ + cror 4*cr1+eq,4*cr1+eq,4*cr2+eq + /* cr0 is 74xx */ + cror 4*cr0+eq,4*cr0+eq,4*cr3+eq + cror 4*cr0+eq,4*cr0+eq,4*cr4+eq + cror 4*cr0+eq,4*cr0+eq,4*cr1+eq + cror 4*cr0+eq,4*cr0+eq,4*cr5+eq + cror 4*cr0+eq,4*cr0+eq,4*cr7+eq + bne 2f + /* Restore 74xx specific regs */ + lwz r4,CS_MSSCR0(r5) + sync + mtspr SPRN_MSSCR0,r4 + sync + isync + lwz r4,CS_MSSSR0(r5) + sync + mtspr SPRN_MSSSR0,r4 + sync + isync + bne cr2,1f + /* Clear 7410 L2CR2 */ + li r4,0 + mtspr SPRN_L2CR2,r4 +1: beq cr1,2f + /* Restore 745x specific registers */ + lwz r4,CS_HID1(r5) + sync + mtspr SPRN_HID1,r4 + isync + sync + lwz r4,CS_ICTRL(r5) + sync + mtspr SPRN_ICTRL,r4 + isync + sync + lwz r4,CS_LDSTCR(r5) + sync + mtspr SPRN_LDSTCR,r4 + isync + sync + lwz r4,CS_LDSTDB(r5) + sync + mtspr SPRN_LDSTDB,r4 + isync + sync +2: bne cr6,1f + /* Restore 750FX specific registers + * that is restore HID2 on rev 2.x and PLL config & switch + * to PLL 0 on all + */ + /* If rev 2.x, restore HID2 with low voltage bit cleared */ + mfspr r3,SPRN_PVR + andi. r3,r3,0xff00 + cmpwi cr0,r3,0x0200 + bne 4f + lwz r4,CS_HID2(r5) + rlwinm r4,r4,0,19,17 + mtspr SPRN_HID2,r4 + sync +4: + lwz r4,CS_HID1(r5) + rlwinm r5,r4,0,16,14 + mtspr SPRN_HID1,r5 + /* Wait for PLL to stabilize */ + mftbl r5 +3: mftbl r6 + sub r6,r6,r5 + cmplwi cr0,r6,10000 + ble 3b + /* Setup final PLL */ + mtspr SPRN_HID1,r4 +1: + mtcr r7 + blr + diff --git a/arch/powerpc/kernel/tau_6xx.c b/arch/powerpc/kernel/tau_6xx.c new file mode 100644 index 00000000000..26bd8ea35a4 --- /dev/null +++ b/arch/powerpc/kernel/tau_6xx.c @@ -0,0 +1,271 @@ +/* + * temp.c Thermal management for cpu's with Thermal Assist Units + * + * Written by Troy Benjegerdes + * + * TODO: + * dynamic power management to limit peak CPU temp (using ICTC) + * calibration??? + * + * Silly, crazy ideas: use cpu load (from scheduler) and ICTC to extend battery + * life in portables, and add a 'performance/watt' metric somewhere in /proc + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +static struct tau_temp +{ + int interrupts; + unsigned char low; + unsigned char high; + unsigned char grew; +} tau[NR_CPUS]; + +struct timer_list tau_timer; + +#undef DEBUG + +/* TODO: put these in a /proc interface, with some sanity checks, and maybe + * dynamic adjustment to minimize # of interrupts */ +/* configurable values for step size and how much to expand the window when + * we get an interrupt. These are based on the limit that was out of range */ +#define step_size 2 /* step size when temp goes out of range */ +#define window_expand 1 /* expand the window by this much */ +/* configurable values for shrinking the window */ +#define shrink_timer 2*HZ /* period between shrinking the window */ +#define min_window 2 /* minimum window size, degrees C */ + +void set_thresholds(unsigned long cpu) +{ +#ifdef CONFIG_TAU_INT + /* + * setup THRM1, + * threshold, valid bit, enable interrupts, interrupt when below threshold + */ + mtspr(SPRN_THRM1, THRM1_THRES(tau[cpu].low) | THRM1_V | THRM1_TIE | THRM1_TID); + + /* setup THRM2, + * threshold, valid bit, enable interrupts, interrupt when above threshhold + */ + mtspr (SPRN_THRM2, THRM1_THRES(tau[cpu].high) | THRM1_V | THRM1_TIE); +#else + /* same thing but don't enable interrupts */ + mtspr(SPRN_THRM1, THRM1_THRES(tau[cpu].low) | THRM1_V | THRM1_TID); + mtspr(SPRN_THRM2, THRM1_THRES(tau[cpu].high) | THRM1_V); +#endif +} + +void TAUupdate(int cpu) +{ + unsigned thrm; + +#ifdef DEBUG + printk("TAUupdate "); +#endif + + /* if both thresholds are crossed, the step_sizes cancel out + * and the window winds up getting expanded twice. */ + if((thrm = mfspr(SPRN_THRM1)) & THRM1_TIV){ /* is valid? */ + if(thrm & THRM1_TIN){ /* crossed low threshold */ + if (tau[cpu].low >= step_size){ + tau[cpu].low -= step_size; + tau[cpu].high -= (step_size - window_expand); + } + tau[cpu].grew = 1; +#ifdef DEBUG + printk("low threshold crossed "); +#endif + } + } + if((thrm = mfspr(SPRN_THRM2)) & THRM1_TIV){ /* is valid? */ + if(thrm & THRM1_TIN){ /* crossed high threshold */ + if (tau[cpu].high <= 127-step_size){ + tau[cpu].low += (step_size - window_expand); + tau[cpu].high += step_size; + } + tau[cpu].grew = 1; +#ifdef DEBUG + printk("high threshold crossed "); +#endif + } + } + +#ifdef DEBUG + printk("grew = %d\n", tau[cpu].grew); +#endif + +#ifndef CONFIG_TAU_INT /* tau_timeout will do this if not using interrupts */ + set_thresholds(cpu); +#endif + +} + +#ifdef CONFIG_TAU_INT +/* + * TAU interrupts - called when we have a thermal assist unit interrupt + * with interrupts disabled + */ + +void TAUException(struct pt_regs * regs) +{ + int cpu = smp_processor_id(); + + irq_enter(); + tau[cpu].interrupts++; + + TAUupdate(cpu); + + irq_exit(); +} +#endif /* CONFIG_TAU_INT */ + +static void tau_timeout(void * info) +{ + int cpu; + unsigned long flags; + int size; + int shrink; + + /* disabling interrupts *should* be okay */ + local_irq_save(flags); + cpu = smp_processor_id(); + +#ifndef CONFIG_TAU_INT + TAUupdate(cpu); +#endif + + size = tau[cpu].high - tau[cpu].low; + if (size > min_window && ! tau[cpu].grew) { + /* do an exponential shrink of half the amount currently over size */ + shrink = (2 + size - min_window) / 4; + if (shrink) { + tau[cpu].low += shrink; + tau[cpu].high -= shrink; + } else { /* size must have been min_window + 1 */ + tau[cpu].low += 1; +#if 1 /* debug */ + if ((tau[cpu].high - tau[cpu].low) != min_window){ + printk(KERN_ERR "temp.c: line %d, logic error\n", __LINE__); + } +#endif + } + } + + tau[cpu].grew = 0; + + set_thresholds(cpu); + + /* + * Do the enable every time, since otherwise a bunch of (relatively) + * complex sleep code needs to be added. One mtspr every time + * tau_timeout is called is probably not a big deal. + * + * Enable thermal sensor and set up sample interval timer + * need 20 us to do the compare.. until a nice 'cpu_speed' function + * call is implemented, just assume a 500 mhz clock. It doesn't really + * matter if we take too long for a compare since it's all interrupt + * driven anyway. + * + * use a extra long time.. (60 us @ 500 mhz) + */ + mtspr(SPRN_THRM3, THRM3_SITV(500*60) | THRM3_E); + + local_irq_restore(flags); +} + +static void tau_timeout_smp(unsigned long unused) +{ + + /* schedule ourselves to be run again */ + mod_timer(&tau_timer, jiffies + shrink_timer) ; + on_each_cpu(tau_timeout, NULL, 1, 0); +} + +/* + * setup the TAU + * + * Set things up to use THRM1 as a temperature lower bound, and THRM2 as an upper bound. + * Start off at zero + */ + +int tau_initialized = 0; + +void __init TAU_init_smp(void * info) +{ + unsigned long cpu = smp_processor_id(); + + /* set these to a reasonable value and let the timer shrink the + * window */ + tau[cpu].low = 5; + tau[cpu].high = 120; + + set_thresholds(cpu); +} + +int __init TAU_init(void) +{ + /* We assume in SMP that if one CPU has TAU support, they + * all have it --BenH + */ + if (!cpu_has_feature(CPU_FTR_TAU)) { + printk("Thermal assist unit not available\n"); + tau_initialized = 0; + return 1; + } + + + /* first, set up the window shrinking timer */ + init_timer(&tau_timer); + tau_timer.function = tau_timeout_smp; + tau_timer.expires = jiffies + shrink_timer; + add_timer(&tau_timer); + + on_each_cpu(TAU_init_smp, NULL, 1, 0); + + printk("Thermal assist unit "); +#ifdef CONFIG_TAU_INT + printk("using interrupts, "); +#else + printk("using timers, "); +#endif + printk("shrink_timer: %d jiffies\n", shrink_timer); + tau_initialized = 1; + + return 0; +} + +__initcall(TAU_init); + +/* + * return current temp + */ + +u32 cpu_temp_both(unsigned long cpu) +{ + return ((tau[cpu].high << 16) | tau[cpu].low); +} + +int cpu_temp(unsigned long cpu) +{ + return ((tau[cpu].high + tau[cpu].low) / 2); +} + +int tau_interrupts(unsigned long cpu) +{ + return (tau[cpu].interrupts); +} diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index 3d50a268683..d6a4863d4e7 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile @@ -13,7 +13,6 @@ extra-y += vmlinux.lds obj-y := entry.o traps.o time.o misc.o \ setup.o \ ppc_htab.o -obj-$(CONFIG_6xx) += cpu_setup_6xx.o obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o obj-$(CONFIG_MODULES) += module.o ppc_ksyms.o obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-mapping.o @@ -21,7 +20,6 @@ obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_RAPIDIO) += rio.o obj-$(CONFIG_KGDB) += ppc-stub.o obj-$(CONFIG_SMP) += smp.o smp-tbsync.o -obj-$(CONFIG_TAU) += temp.o ifndef CONFIG_E200 obj-$(CONFIG_FSL_BOOKE) += perfmon_fsl_booke.o endif @@ -34,12 +32,10 @@ endif # These are here while we do the architecture merge else -obj-$(CONFIG_6xx) += cpu_setup_6xx.o obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-mapping.o obj-$(CONFIG_KGDB) += ppc-stub.o -obj-$(CONFIG_TAU) += temp.o ifndef CONFIG_E200 obj-$(CONFIG_FSL_BOOKE) += perfmon_fsl_booke.o endif diff --git a/arch/ppc/kernel/cpu_setup_6xx.S b/arch/ppc/kernel/cpu_setup_6xx.S deleted file mode 100644 index 55ed7716636..00000000000 --- a/arch/ppc/kernel/cpu_setup_6xx.S +++ /dev/null @@ -1,474 +0,0 @@ -/* - * This file contains low level CPU setup functions. - * Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#include -#include -#include -#include -#include -#include -#include - -_GLOBAL(__setup_cpu_603) - b setup_common_caches -_GLOBAL(__setup_cpu_604) - mflr r4 - bl setup_common_caches - bl setup_604_hid0 - mtlr r4 - blr -_GLOBAL(__setup_cpu_750) - mflr r4 - bl __init_fpu_registers - bl setup_common_caches - bl setup_750_7400_hid0 - mtlr r4 - blr -_GLOBAL(__setup_cpu_750cx) - mflr r4 - bl __init_fpu_registers - bl setup_common_caches - bl setup_750_7400_hid0 - bl setup_750cx - mtlr r4 - blr -_GLOBAL(__setup_cpu_750fx) - mflr r4 - bl __init_fpu_registers - bl setup_common_caches - bl setup_750_7400_hid0 - bl setup_750fx - mtlr r4 - blr -_GLOBAL(__setup_cpu_7400) - mflr r4 - bl __init_fpu_registers - bl setup_7400_workarounds - bl setup_common_caches - bl setup_750_7400_hid0 - mtlr r4 - blr -_GLOBAL(__setup_cpu_7410) - mflr r4 - bl __init_fpu_registers - bl setup_7410_workarounds - bl setup_common_caches - bl setup_750_7400_hid0 - li r3,0 - mtspr SPRN_L2CR2,r3 - mtlr r4 - blr -_GLOBAL(__setup_cpu_745x) - mflr r4 - bl setup_common_caches - bl setup_745x_specifics - mtlr r4 - blr - -/* Enable caches for 603's, 604, 750 & 7400 */ -setup_common_caches: - mfspr r11,SPRN_HID0 - andi. r0,r11,HID0_DCE - ori r11,r11,HID0_ICE|HID0_DCE - ori r8,r11,HID0_ICFI - bne 1f /* don't invalidate the D-cache */ - ori r8,r8,HID0_DCI /* unless it wasn't enabled */ -1: sync - mtspr SPRN_HID0,r8 /* enable and invalidate caches */ - sync - mtspr SPRN_HID0,r11 /* enable caches */ - sync - isync - blr - -/* 604, 604e, 604ev, ... - * Enable superscalar execution & branch history table - */ -setup_604_hid0: - mfspr r11,SPRN_HID0 - ori r11,r11,HID0_SIED|HID0_BHTE - ori r8,r11,HID0_BTCD - sync - mtspr SPRN_HID0,r8 /* flush branch target address cache */ - sync /* on 604e/604r */ - mtspr SPRN_HID0,r11 - sync - isync - blr - -/* 7400 <= rev 2.7 and 7410 rev = 1.0 suffer from some - * erratas we work around here. - * Moto MPC710CE.pdf describes them, those are errata - * #3, #4 and #5 - * Note that we assume the firmware didn't choose to - * apply other workarounds (there are other ones documented - * in the .pdf). It appear that Apple firmware only works - * around #3 and with the same fix we use. We may want to - * check if the CPU is using 60x bus mode in which case - * the workaround for errata #4 is useless. Also, we may - * want to explicitely clear HID0_NOPDST as this is not - * needed once we have applied workaround #5 (though it's - * not set by Apple's firmware at least). - */ -setup_7400_workarounds: - mfpvr r3 - rlwinm r3,r3,0,20,31 - cmpwi 0,r3,0x0207 - ble 1f - blr -setup_7410_workarounds: - mfpvr r3 - rlwinm r3,r3,0,20,31 - cmpwi 0,r3,0x0100 - bnelr -1: - mfspr r11,SPRN_MSSSR0 - /* Errata #3: Set L1OPQ_SIZE to 0x10 */ - rlwinm r11,r11,0,9,6 - oris r11,r11,0x0100 - /* Errata #4: Set L2MQ_SIZE to 1 (check for MPX mode first ?) */ - oris r11,r11,0x0002 - /* Errata #5: Set DRLT_SIZE to 0x01 */ - rlwinm r11,r11,0,5,2 - oris r11,r11,0x0800 - sync - mtspr SPRN_MSSSR0,r11 - sync - isync - blr - -/* 740/750/7400/7410 - * Enable Store Gathering (SGE), Address Brodcast (ABE), - * Branch History Table (BHTE), Branch Target ICache (BTIC) - * Dynamic Power Management (DPM), Speculative (SPD) - * Clear Instruction cache throttling (ICTC) - */ -setup_750_7400_hid0: - mfspr r11,SPRN_HID0 - ori r11,r11,HID0_SGE | HID0_ABE | HID0_BHTE | HID0_BTIC - oris r11,r11,HID0_DPM@h -BEGIN_FTR_SECTION - xori r11,r11,HID0_BTIC -END_FTR_SECTION_IFSET(CPU_FTR_NO_BTIC) -BEGIN_FTR_SECTION - xoris r11,r11,HID0_DPM@h /* disable dynamic power mgmt */ -END_FTR_SECTION_IFSET(CPU_FTR_NO_DPM) - li r3,HID0_SPD - andc r11,r11,r3 /* clear SPD: enable speculative */ - li r3,0 - mtspr SPRN_ICTC,r3 /* Instruction Cache Throttling off */ - isync - mtspr SPRN_HID0,r11 - sync - isync - blr - -/* 750cx specific - * Looks like we have to disable NAP feature for some PLL settings... - * (waiting for confirmation) - */ -setup_750cx: - mfspr r10, SPRN_HID1 - rlwinm r10,r10,4,28,31 - cmpwi cr0,r10,7 - cmpwi cr1,r10,9 - cmpwi cr2,r10,11 - cror 4*cr0+eq,4*cr0+eq,4*cr1+eq - cror 4*cr0+eq,4*cr0+eq,4*cr2+eq - bnelr - lwz r6,CPU_SPEC_FEATURES(r5) - li r7,CPU_FTR_CAN_NAP - andc r6,r6,r7 - stw r6,CPU_SPEC_FEATURES(r5) - blr - -/* 750fx specific - */ -setup_750fx: - blr - -/* MPC 745x - * Enable Store Gathering (SGE), Branch Folding (FOLD) - * Branch History Table (BHTE), Branch Target ICache (BTIC) - * Dynamic Power Management (DPM), Speculative (SPD) - * Ensure our data cache instructions really operate. - * Timebase has to be running or we wouldn't have made it here, - * just ensure we don't disable it. - * Clear Instruction cache throttling (ICTC) - * Enable L2 HW prefetch - */ -setup_745x_specifics: - /* We check for the presence of an L3 cache setup by - * the firmware. If any, we disable NAP capability as - * it's known to be bogus on rev 2.1 and earlier - */ - mfspr r11,SPRN_L3CR - andis. r11,r11,L3CR_L3E@h - beq 1f - lwz r6,CPU_SPEC_FEATURES(r5) - andi. r0,r6,CPU_FTR_L3_DISABLE_NAP - beq 1f - li r7,CPU_FTR_CAN_NAP - andc r6,r6,r7 - stw r6,CPU_SPEC_FEATURES(r5) -1: - mfspr r11,SPRN_HID0 - - /* All of the bits we have to set..... - */ - ori r11,r11,HID0_SGE | HID0_FOLD | HID0_BHTE - ori r11,r11,HID0_LRSTK | HID0_BTIC - oris r11,r11,HID0_DPM@h -BEGIN_FTR_SECTION - xori r11,r11,HID0_BTIC -END_FTR_SECTION_IFSET(CPU_FTR_NO_BTIC) -BEGIN_FTR_SECTION - xoris r11,r11,HID0_DPM@h /* disable dynamic power mgmt */ -END_FTR_SECTION_IFSET(CPU_FTR_NO_DPM) - - /* All of the bits we have to clear.... - */ - li r3,HID0_SPD | HID0_NOPDST | HID0_NOPTI - andc r11,r11,r3 /* clear SPD: enable speculative */ - li r3,0 - - mtspr SPRN_ICTC,r3 /* Instruction Cache Throttling off */ - isync - mtspr SPRN_HID0,r11 - sync - isync - - /* Enable L2 HW prefetch, if L2 is enabled - */ - mfspr r3,SPRN_L2CR - andis. r3,r3,L2CR_L2E@h - beqlr - mfspr r3,SPRN_MSSCR0 - ori r3,r3,3 - sync - mtspr SPRN_MSSCR0,r3 - sync - isync - blr - -/* - * Initialize the FPU registers. This is needed to work around an errata - * in some 750 cpus where using a not yet initialized FPU register after - * power on reset may hang the CPU - */ -_GLOBAL(__init_fpu_registers) - mfmsr r10 - ori r11,r10,MSR_FP - mtmsr r11 - isync - addis r9,r3,empty_zero_page@ha - addi r9,r9,empty_zero_page@l - REST_32FPRS(0,r9) - sync - mtmsr r10 - isync - blr - - -/* Definitions for the table use to save CPU states */ -#define CS_HID0 0 -#define CS_HID1 4 -#define CS_HID2 8 -#define CS_MSSCR0 12 -#define CS_MSSSR0 16 -#define CS_ICTRL 20 -#define CS_LDSTCR 24 -#define CS_LDSTDB 28 -#define CS_SIZE 32 - - .data - .balign L1_CACHE_BYTES -cpu_state_storage: - .space CS_SIZE - .balign L1_CACHE_BYTES,0 - .text - -/* Called in normal context to backup CPU 0 state. This - * does not include cache settings. This function is also - * called for machine sleep. This does not include the MMU - * setup, BATs, etc... but rather the "special" registers - * like HID0, HID1, MSSCR0, etc... - */ -_GLOBAL(__save_cpu_setup) - /* Some CR fields are volatile, we back it up all */ - mfcr r7 - - /* Get storage ptr */ - lis r5,cpu_state_storage@h - ori r5,r5,cpu_state_storage@l - - /* Save HID0 (common to all CONFIG_6xx cpus) */ - mfspr r3,SPRN_HID0 - stw r3,CS_HID0(r5) - - /* Now deal with CPU type dependent registers */ - mfspr r3,SPRN_PVR - srwi r3,r3,16 - cmplwi cr0,r3,0x8000 /* 7450 */ - cmplwi cr1,r3,0x000c /* 7400 */ - cmplwi cr2,r3,0x800c /* 7410 */ - cmplwi cr3,r3,0x8001 /* 7455 */ - cmplwi cr4,r3,0x8002 /* 7457 */ - cmplwi cr5,r3,0x8003 /* 7447A */ - cmplwi cr6,r3,0x7000 /* 750FX */ - cmplwi cr7,r3,0x8004 /* 7448 */ - /* cr1 is 7400 || 7410 */ - cror 4*cr1+eq,4*cr1+eq,4*cr2+eq - /* cr0 is 74xx */ - cror 4*cr0+eq,4*cr0+eq,4*cr3+eq - cror 4*cr0+eq,4*cr0+eq,4*cr4+eq - cror 4*cr0+eq,4*cr0+eq,4*cr1+eq - cror 4*cr0+eq,4*cr0+eq,4*cr5+eq - cror 4*cr0+eq,4*cr0+eq,4*cr7+eq - bne 1f - /* Backup 74xx specific regs */ - mfspr r4,SPRN_MSSCR0 - stw r4,CS_MSSCR0(r5) - mfspr r4,SPRN_MSSSR0 - stw r4,CS_MSSSR0(r5) - beq cr1,1f - /* Backup 745x specific registers */ - mfspr r4,SPRN_HID1 - stw r4,CS_HID1(r5) - mfspr r4,SPRN_ICTRL - stw r4,CS_ICTRL(r5) - mfspr r4,SPRN_LDSTCR - stw r4,CS_LDSTCR(r5) - mfspr r4,SPRN_LDSTDB - stw r4,CS_LDSTDB(r5) -1: - bne cr6,1f - /* Backup 750FX specific registers */ - mfspr r4,SPRN_HID1 - stw r4,CS_HID1(r5) - /* If rev 2.x, backup HID2 */ - mfspr r3,SPRN_PVR - andi. r3,r3,0xff00 - cmpwi cr0,r3,0x0200 - bne 1f - mfspr r4,SPRN_HID2 - stw r4,CS_HID2(r5) -1: - mtcr r7 - blr - -/* Called with no MMU context (typically MSR:IR/DR off) to - * restore CPU state as backed up by the previous - * function. This does not include cache setting - */ -_GLOBAL(__restore_cpu_setup) - /* Some CR fields are volatile, we back it up all */ - mfcr r7 - - /* Get storage ptr */ - lis r5,(cpu_state_storage-KERNELBASE)@h - ori r5,r5,cpu_state_storage@l - - /* Restore HID0 */ - lwz r3,CS_HID0(r5) - sync - isync - mtspr SPRN_HID0,r3 - sync - isync - - /* Now deal with CPU type dependent registers */ - mfspr r3,SPRN_PVR - srwi r3,r3,16 - cmplwi cr0,r3,0x8000 /* 7450 */ - cmplwi cr1,r3,0x000c /* 7400 */ - cmplwi cr2,r3,0x800c /* 7410 */ - cmplwi cr3,r3,0x8001 /* 7455 */ - cmplwi cr4,r3,0x8002 /* 7457 */ - cmplwi cr5,r3,0x8003 /* 7447A */ - cmplwi cr6,r3,0x7000 /* 750FX */ - cmplwi cr7,r3,0x8004 /* 7448 */ - /* cr1 is 7400 || 7410 */ - cror 4*cr1+eq,4*cr1+eq,4*cr2+eq - /* cr0 is 74xx */ - cror 4*cr0+eq,4*cr0+eq,4*cr3+eq - cror 4*cr0+eq,4*cr0+eq,4*cr4+eq - cror 4*cr0+eq,4*cr0+eq,4*cr1+eq - cror 4*cr0+eq,4*cr0+eq,4*cr5+eq - cror 4*cr0+eq,4*cr0+eq,4*cr7+eq - bne 2f - /* Restore 74xx specific regs */ - lwz r4,CS_MSSCR0(r5) - sync - mtspr SPRN_MSSCR0,r4 - sync - isync - lwz r4,CS_MSSSR0(r5) - sync - mtspr SPRN_MSSSR0,r4 - sync - isync - bne cr2,1f - /* Clear 7410 L2CR2 */ - li r4,0 - mtspr SPRN_L2CR2,r4 -1: beq cr1,2f - /* Restore 745x specific registers */ - lwz r4,CS_HID1(r5) - sync - mtspr SPRN_HID1,r4 - isync - sync - lwz r4,CS_ICTRL(r5) - sync - mtspr SPRN_ICTRL,r4 - isync - sync - lwz r4,CS_LDSTCR(r5) - sync - mtspr SPRN_LDSTCR,r4 - isync - sync - lwz r4,CS_LDSTDB(r5) - sync - mtspr SPRN_LDSTDB,r4 - isync - sync -2: bne cr6,1f - /* Restore 750FX specific registers - * that is restore HID2 on rev 2.x and PLL config & switch - * to PLL 0 on all - */ - /* If rev 2.x, restore HID2 with low voltage bit cleared */ - mfspr r3,SPRN_PVR - andi. r3,r3,0xff00 - cmpwi cr0,r3,0x0200 - bne 4f - lwz r4,CS_HID2(r5) - rlwinm r4,r4,0,19,17 - mtspr SPRN_HID2,r4 - sync -4: - lwz r4,CS_HID1(r5) - rlwinm r5,r4,0,16,14 - mtspr SPRN_HID1,r5 - /* Wait for PLL to stabilize */ - mftbl r5 -3: mftbl r6 - sub r6,r6,r5 - cmplwi cr0,r6,10000 - ble 3b - /* Setup final PLL */ - mtspr SPRN_HID1,r4 -1: - mtcr r7 - blr - diff --git a/arch/ppc/kernel/temp.c b/arch/ppc/kernel/temp.c deleted file mode 100644 index 26bd8ea35a4..00000000000 --- a/arch/ppc/kernel/temp.c +++ /dev/null @@ -1,271 +0,0 @@ -/* - * temp.c Thermal management for cpu's with Thermal Assist Units - * - * Written by Troy Benjegerdes - * - * TODO: - * dynamic power management to limit peak CPU temp (using ICTC) - * calibration??? - * - * Silly, crazy ideas: use cpu load (from scheduler) and ICTC to extend battery - * life in portables, and add a 'performance/watt' metric somewhere in /proc - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -static struct tau_temp -{ - int interrupts; - unsigned char low; - unsigned char high; - unsigned char grew; -} tau[NR_CPUS]; - -struct timer_list tau_timer; - -#undef DEBUG - -/* TODO: put these in a /proc interface, with some sanity checks, and maybe - * dynamic adjustment to minimize # of interrupts */ -/* configurable values for step size and how much to expand the window when - * we get an interrupt. These are based on the limit that was out of range */ -#define step_size 2 /* step size when temp goes out of range */ -#define window_expand 1 /* expand the window by this much */ -/* configurable values for shrinking the window */ -#define shrink_timer 2*HZ /* period between shrinking the window */ -#define min_window 2 /* minimum window size, degrees C */ - -void set_thresholds(unsigned long cpu) -{ -#ifdef CONFIG_TAU_INT - /* - * setup THRM1, - * threshold, valid bit, enable interrupts, interrupt when below threshold - */ - mtspr(SPRN_THRM1, THRM1_THRES(tau[cpu].low) | THRM1_V | THRM1_TIE | THRM1_TID); - - /* setup THRM2, - * threshold, valid bit, enable interrupts, interrupt when above threshhold - */ - mtspr (SPRN_THRM2, THRM1_THRES(tau[cpu].high) | THRM1_V | THRM1_TIE); -#else - /* same thing but don't enable interrupts */ - mtspr(SPRN_THRM1, THRM1_THRES(tau[cpu].low) | THRM1_V | THRM1_TID); - mtspr(SPRN_THRM2, THRM1_THRES(tau[cpu].high) | THRM1_V); -#endif -} - -void TAUupdate(int cpu) -{ - unsigned thrm; - -#ifdef DEBUG - printk("TAUupdate "); -#endif - - /* if both thresholds are crossed, the step_sizes cancel out - * and the window winds up getting expanded twice. */ - if((thrm = mfspr(SPRN_THRM1)) & THRM1_TIV){ /* is valid? */ - if(thrm & THRM1_TIN){ /* crossed low threshold */ - if (tau[cpu].low >= step_size){ - tau[cpu].low -= step_size; - tau[cpu].high -= (step_size - window_expand); - } - tau[cpu].grew = 1; -#ifdef DEBUG - printk("low threshold crossed "); -#endif - } - } - if((thrm = mfspr(SPRN_THRM2)) & THRM1_TIV){ /* is valid? */ - if(thrm & THRM1_TIN){ /* crossed high threshold */ - if (tau[cpu].high <= 127-step_size){ - tau[cpu].low += (step_size - window_expand); - tau[cpu].high += step_size; - } - tau[cpu].grew = 1; -#ifdef DEBUG - printk("high threshold crossed "); -#endif - } - } - -#ifdef DEBUG - printk("grew = %d\n", tau[cpu].grew); -#endif - -#ifndef CONFIG_TAU_INT /* tau_timeout will do this if not using interrupts */ - set_thresholds(cpu); -#endif - -} - -#ifdef CONFIG_TAU_INT -/* - * TAU interrupts - called when we have a thermal assist unit interrupt - * with interrupts disabled - */ - -void TAUException(struct pt_regs * regs) -{ - int cpu = smp_processor_id(); - - irq_enter(); - tau[cpu].interrupts++; - - TAUupdate(cpu); - - irq_exit(); -} -#endif /* CONFIG_TAU_INT */ - -static void tau_timeout(void * info) -{ - int cpu; - unsigned long flags; - int size; - int shrink; - - /* disabling interrupts *should* be okay */ - local_irq_save(flags); - cpu = smp_processor_id(); - -#ifndef CONFIG_TAU_INT - TAUupdate(cpu); -#endif - - size = tau[cpu].high - tau[cpu].low; - if (size > min_window && ! tau[cpu].grew) { - /* do an exponential shrink of half the amount currently over size */ - shrink = (2 + size - min_window) / 4; - if (shrink) { - tau[cpu].low += shrink; - tau[cpu].high -= shrink; - } else { /* size must have been min_window + 1 */ - tau[cpu].low += 1; -#if 1 /* debug */ - if ((tau[cpu].high - tau[cpu].low) != min_window){ - printk(KERN_ERR "temp.c: line %d, logic error\n", __LINE__); - } -#endif - } - } - - tau[cpu].grew = 0; - - set_thresholds(cpu); - - /* - * Do the enable every time, since otherwise a bunch of (relatively) - * complex sleep code needs to be added. One mtspr every time - * tau_timeout is called is probably not a big deal. - * - * Enable thermal sensor and set up sample interval timer - * need 20 us to do the compare.. until a nice 'cpu_speed' function - * call is implemented, just assume a 500 mhz clock. It doesn't really - * matter if we take too long for a compare since it's all interrupt - * driven anyway. - * - * use a extra long time.. (60 us @ 500 mhz) - */ - mtspr(SPRN_THRM3, THRM3_SITV(500*60) | THRM3_E); - - local_irq_restore(flags); -} - -static void tau_timeout_smp(unsigned long unused) -{ - - /* schedule ourselves to be run again */ - mod_timer(&tau_timer, jiffies + shrink_timer) ; - on_each_cpu(tau_timeout, NULL, 1, 0); -} - -/* - * setup the TAU - * - * Set things up to use THRM1 as a temperature lower bound, and THRM2 as an upper bound. - * Start off at zero - */ - -int tau_initialized = 0; - -void __init TAU_init_smp(void * info) -{ - unsigned long cpu = smp_processor_id(); - - /* set these to a reasonable value and let the timer shrink the - * window */ - tau[cpu].low = 5; - tau[cpu].high = 120; - - set_thresholds(cpu); -} - -int __init TAU_init(void) -{ - /* We assume in SMP that if one CPU has TAU support, they - * all have it --BenH - */ - if (!cpu_has_feature(CPU_FTR_TAU)) { - printk("Thermal assist unit not available\n"); - tau_initialized = 0; - return 1; - } - - - /* first, set up the window shrinking timer */ - init_timer(&tau_timer); - tau_timer.function = tau_timeout_smp; - tau_timer.expires = jiffies + shrink_timer; - add_timer(&tau_timer); - - on_each_cpu(TAU_init_smp, NULL, 1, 0); - - printk("Thermal assist unit "); -#ifdef CONFIG_TAU_INT - printk("using interrupts, "); -#else - printk("using timers, "); -#endif - printk("shrink_timer: %d jiffies\n", shrink_timer); - tau_initialized = 1; - - return 0; -} - -__initcall(TAU_init); - -/* - * return current temp - */ - -u32 cpu_temp_both(unsigned long cpu) -{ - return ((tau[cpu].high << 16) | tau[cpu].low); -} - -int cpu_temp(unsigned long cpu) -{ - return ((tau[cpu].high + tau[cpu].low) / 2); -} - -int tau_interrupts(unsigned long cpu) -{ - return (tau[cpu].interrupts); -} -- cgit v1.2.3-18-g5258 From 45320bcbabfa9149f43a5beb4b9a4f108dd98929 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 27 Mar 2006 19:21:46 +1100 Subject: powerpc: Move swsusp.S over to arch/powerpc ... and rename it to swsusp_32.S, since it's 32-bit only at this stage. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/swsusp_32.S | 349 ++++++++++++++++++++++++++++++++++++++++ arch/ppc/kernel/Makefile | 2 - arch/ppc/kernel/swsusp.S | 349 ---------------------------------------- 3 files changed, 349 insertions(+), 351 deletions(-) create mode 100644 arch/powerpc/kernel/swsusp_32.S delete mode 100644 arch/ppc/kernel/swsusp.S (limited to 'arch') diff --git a/arch/powerpc/kernel/swsusp_32.S b/arch/powerpc/kernel/swsusp_32.S new file mode 100644 index 00000000000..69773cc1a85 --- /dev/null +++ b/arch/powerpc/kernel/swsusp_32.S @@ -0,0 +1,349 @@ +#include +#include +#include +#include +#include +#include +#include +#include + + +/* + * Structure for storing CPU registers on the save area. + */ +#define SL_SP 0 +#define SL_PC 4 +#define SL_MSR 8 +#define SL_SDR1 0xc +#define SL_SPRG0 0x10 /* 4 sprg's */ +#define SL_DBAT0 0x20 +#define SL_IBAT0 0x28 +#define SL_DBAT1 0x30 +#define SL_IBAT1 0x38 +#define SL_DBAT2 0x40 +#define SL_IBAT2 0x48 +#define SL_DBAT3 0x50 +#define SL_IBAT3 0x58 +#define SL_TB 0x60 +#define SL_R2 0x68 +#define SL_CR 0x6c +#define SL_LR 0x70 +#define SL_R12 0x74 /* r12 to r31 */ +#define SL_SIZE (SL_R12 + 80) + + .section .data + .align 5 + +_GLOBAL(swsusp_save_area) + .space SL_SIZE + + + .section .text + .align 5 + +_GLOBAL(swsusp_arch_suspend) + + lis r11,swsusp_save_area@h + ori r11,r11,swsusp_save_area@l + + mflr r0 + stw r0,SL_LR(r11) + mfcr r0 + stw r0,SL_CR(r11) + stw r1,SL_SP(r11) + stw r2,SL_R2(r11) + stmw r12,SL_R12(r11) + + /* Save MSR & SDR1 */ + mfmsr r4 + stw r4,SL_MSR(r11) + mfsdr1 r4 + stw r4,SL_SDR1(r11) + + /* Get a stable timebase and save it */ +1: mftbu r4 + stw r4,SL_TB(r11) + mftb r5 + stw r5,SL_TB+4(r11) + mftbu r3 + cmpw r3,r4 + bne 1b + + /* Save SPRGs */ + mfsprg r4,0 + stw r4,SL_SPRG0(r11) + mfsprg r4,1 + stw r4,SL_SPRG0+4(r11) + mfsprg r4,2 + stw r4,SL_SPRG0+8(r11) + mfsprg r4,3 + stw r4,SL_SPRG0+12(r11) + + /* Save BATs */ + mfdbatu r4,0 + stw r4,SL_DBAT0(r11) + mfdbatl r4,0 + stw r4,SL_DBAT0+4(r11) + mfdbatu r4,1 + stw r4,SL_DBAT1(r11) + mfdbatl r4,1 + stw r4,SL_DBAT1+4(r11) + mfdbatu r4,2 + stw r4,SL_DBAT2(r11) + mfdbatl r4,2 + stw r4,SL_DBAT2+4(r11) + mfdbatu r4,3 + stw r4,SL_DBAT3(r11) + mfdbatl r4,3 + stw r4,SL_DBAT3+4(r11) + mfibatu r4,0 + stw r4,SL_IBAT0(r11) + mfibatl r4,0 + stw r4,SL_IBAT0+4(r11) + mfibatu r4,1 + stw r4,SL_IBAT1(r11) + mfibatl r4,1 + stw r4,SL_IBAT1+4(r11) + mfibatu r4,2 + stw r4,SL_IBAT2(r11) + mfibatl r4,2 + stw r4,SL_IBAT2+4(r11) + mfibatu r4,3 + stw r4,SL_IBAT3(r11) + mfibatl r4,3 + stw r4,SL_IBAT3+4(r11) + +#if 0 + /* Backup various CPU config stuffs */ + bl __save_cpu_setup +#endif + /* Call the low level suspend stuff (we should probably have made + * a stackframe... + */ + bl swsusp_save + + /* Restore LR from the save area */ + lis r11,swsusp_save_area@h + ori r11,r11,swsusp_save_area@l + lwz r0,SL_LR(r11) + mtlr r0 + + blr + + +/* Resume code */ +_GLOBAL(swsusp_arch_resume) + + /* Stop pending alitvec streams and memory accesses */ +BEGIN_FTR_SECTION + DSSALL +END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) + sync + + /* Disable MSR:DR to make sure we don't take a TLB or + * hash miss during the copy, as our hash table will + * for a while be unuseable. For .text, we assume we are + * covered by a BAT. This works only for non-G5 at this + * point. G5 will need a better approach, possibly using + * a small temporary hash table filled with large mappings, + * disabling the MMU completely isn't a good option for + * performance reasons. + * (Note that 750's may have the same performance issue as + * the G5 in this case, we should investigate using moving + * BATs for these CPUs) + */ + mfmsr r0 + sync + rlwinm r0,r0,0,28,26 /* clear MSR_DR */ + mtmsr r0 + sync + isync + + /* Load ptr the list of pages to copy in r3 */ + lis r11,(pagedir_nosave - KERNELBASE)@h + ori r11,r11,pagedir_nosave@l + lwz r10,0(r11) + + /* Copy the pages. This is a very basic implementation, to + * be replaced by something more cache efficient */ +1: + tophys(r3,r10) + li r0,256 + mtctr r0 + lwz r11,pbe_address(r3) /* source */ + tophys(r5,r11) + lwz r10,pbe_orig_address(r3) /* destination */ + tophys(r6,r10) +2: + lwz r8,0(r5) + lwz r9,4(r5) + lwz r10,8(r5) + lwz r11,12(r5) + addi r5,r5,16 + stw r8,0(r6) + stw r9,4(r6) + stw r10,8(r6) + stw r11,12(r6) + addi r6,r6,16 + bdnz 2b + lwz r10,pbe_next(r3) + cmpwi 0,r10,0 + bne 1b + + /* Do a very simple cache flush/inval of the L1 to ensure + * coherency of the icache + */ + lis r3,0x0002 + mtctr r3 + li r3, 0 +1: + lwz r0,0(r3) + addi r3,r3,0x0020 + bdnz 1b + isync + sync + + /* Now flush those cache lines */ + lis r3,0x0002 + mtctr r3 + li r3, 0 +1: + dcbf 0,r3 + addi r3,r3,0x0020 + bdnz 1b + sync + + /* Ok, we are now running with the kernel data of the old + * kernel fully restored. We can get to the save area + * easily now. As for the rest of the code, it assumes the + * loader kernel and the booted one are exactly identical + */ + lis r11,swsusp_save_area@h + ori r11,r11,swsusp_save_area@l + tophys(r11,r11) + +#if 0 + /* Restore various CPU config stuffs */ + bl __restore_cpu_setup +#endif + /* Restore the BATs, and SDR1. Then we can turn on the MMU. + * This is a bit hairy as we are running out of those BATs, + * but first, our code is probably in the icache, and we are + * writing the same value to the BAT, so that should be fine, + * though a better solution will have to be found long-term + */ + lwz r4,SL_SDR1(r11) + mtsdr1 r4 + lwz r4,SL_SPRG0(r11) + mtsprg 0,r4 + lwz r4,SL_SPRG0+4(r11) + mtsprg 1,r4 + lwz r4,SL_SPRG0+8(r11) + mtsprg 2,r4 + lwz r4,SL_SPRG0+12(r11) + mtsprg 3,r4 + +#if 0 + lwz r4,SL_DBAT0(r11) + mtdbatu 0,r4 + lwz r4,SL_DBAT0+4(r11) + mtdbatl 0,r4 + lwz r4,SL_DBAT1(r11) + mtdbatu 1,r4 + lwz r4,SL_DBAT1+4(r11) + mtdbatl 1,r4 + lwz r4,SL_DBAT2(r11) + mtdbatu 2,r4 + lwz r4,SL_DBAT2+4(r11) + mtdbatl 2,r4 + lwz r4,SL_DBAT3(r11) + mtdbatu 3,r4 + lwz r4,SL_DBAT3+4(r11) + mtdbatl 3,r4 + lwz r4,SL_IBAT0(r11) + mtibatu 0,r4 + lwz r4,SL_IBAT0+4(r11) + mtibatl 0,r4 + lwz r4,SL_IBAT1(r11) + mtibatu 1,r4 + lwz r4,SL_IBAT1+4(r11) + mtibatl 1,r4 + lwz r4,SL_IBAT2(r11) + mtibatu 2,r4 + lwz r4,SL_IBAT2+4(r11) + mtibatl 2,r4 + lwz r4,SL_IBAT3(r11) + mtibatu 3,r4 + lwz r4,SL_IBAT3+4(r11) + mtibatl 3,r4 +#endif + +BEGIN_FTR_SECTION + li r4,0 + mtspr SPRN_DBAT4U,r4 + mtspr SPRN_DBAT4L,r4 + mtspr SPRN_DBAT5U,r4 + mtspr SPRN_DBAT5L,r4 + mtspr SPRN_DBAT6U,r4 + mtspr SPRN_DBAT6L,r4 + mtspr SPRN_DBAT7U,r4 + mtspr SPRN_DBAT7L,r4 + mtspr SPRN_IBAT4U,r4 + mtspr SPRN_IBAT4L,r4 + mtspr SPRN_IBAT5U,r4 + mtspr SPRN_IBAT5L,r4 + mtspr SPRN_IBAT6U,r4 + mtspr SPRN_IBAT6L,r4 + mtspr SPRN_IBAT7U,r4 + mtspr SPRN_IBAT7L,r4 +END_FTR_SECTION_IFSET(CPU_FTR_HAS_HIGH_BATS) + + /* Flush all TLBs */ + lis r4,0x1000 +1: addic. r4,r4,-0x1000 + tlbie r4 + blt 1b + sync + + /* restore the MSR and turn on the MMU */ + lwz r3,SL_MSR(r11) + bl turn_on_mmu + tovirt(r11,r11) + + /* Restore TB */ + li r3,0 + mttbl r3 + lwz r3,SL_TB(r11) + lwz r4,SL_TB+4(r11) + mttbu r3 + mttbl r4 + + /* Kick decrementer */ + li r0,1 + mtdec r0 + + /* Restore the callee-saved registers and return */ + lwz r0,SL_CR(r11) + mtcr r0 + lwz r2,SL_R2(r11) + lmw r12,SL_R12(r11) + lwz r1,SL_SP(r11) + lwz r0,SL_LR(r11) + mtlr r0 + + // XXX Note: we don't really need to call swsusp_resume + + li r3,0 + blr + +/* FIXME:This construct is actually not useful since we don't shut + * down the instruction MMU, we could just flip back MSR-DR on. + */ +turn_on_mmu: + mflr r4 + mtsrr0 r4 + mtsrr1 r3 + sync + isync + rfi + diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index d6a4863d4e7..8ac1dd95841 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile @@ -13,7 +13,6 @@ extra-y += vmlinux.lds obj-y := entry.o traps.o time.o misc.o \ setup.o \ ppc_htab.o -obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o obj-$(CONFIG_MODULES) += module.o ppc_ksyms.o obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-mapping.o obj-$(CONFIG_PCI) += pci.o @@ -32,7 +31,6 @@ endif # These are here while we do the architecture merge else -obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-mapping.o obj-$(CONFIG_KGDB) += ppc-stub.o diff --git a/arch/ppc/kernel/swsusp.S b/arch/ppc/kernel/swsusp.S deleted file mode 100644 index 69773cc1a85..00000000000 --- a/arch/ppc/kernel/swsusp.S +++ /dev/null @@ -1,349 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include -#include - - -/* - * Structure for storing CPU registers on the save area. - */ -#define SL_SP 0 -#define SL_PC 4 -#define SL_MSR 8 -#define SL_SDR1 0xc -#define SL_SPRG0 0x10 /* 4 sprg's */ -#define SL_DBAT0 0x20 -#define SL_IBAT0 0x28 -#define SL_DBAT1 0x30 -#define SL_IBAT1 0x38 -#define SL_DBAT2 0x40 -#define SL_IBAT2 0x48 -#define SL_DBAT3 0x50 -#define SL_IBAT3 0x58 -#define SL_TB 0x60 -#define SL_R2 0x68 -#define SL_CR 0x6c -#define SL_LR 0x70 -#define SL_R12 0x74 /* r12 to r31 */ -#define SL_SIZE (SL_R12 + 80) - - .section .data - .align 5 - -_GLOBAL(swsusp_save_area) - .space SL_SIZE - - - .section .text - .align 5 - -_GLOBAL(swsusp_arch_suspend) - - lis r11,swsusp_save_area@h - ori r11,r11,swsusp_save_area@l - - mflr r0 - stw r0,SL_LR(r11) - mfcr r0 - stw r0,SL_CR(r11) - stw r1,SL_SP(r11) - stw r2,SL_R2(r11) - stmw r12,SL_R12(r11) - - /* Save MSR & SDR1 */ - mfmsr r4 - stw r4,SL_MSR(r11) - mfsdr1 r4 - stw r4,SL_SDR1(r11) - - /* Get a stable timebase and save it */ -1: mftbu r4 - stw r4,SL_TB(r11) - mftb r5 - stw r5,SL_TB+4(r11) - mftbu r3 - cmpw r3,r4 - bne 1b - - /* Save SPRGs */ - mfsprg r4,0 - stw r4,SL_SPRG0(r11) - mfsprg r4,1 - stw r4,SL_SPRG0+4(r11) - mfsprg r4,2 - stw r4,SL_SPRG0+8(r11) - mfsprg r4,3 - stw r4,SL_SPRG0+12(r11) - - /* Save BATs */ - mfdbatu r4,0 - stw r4,SL_DBAT0(r11) - mfdbatl r4,0 - stw r4,SL_DBAT0+4(r11) - mfdbatu r4,1 - stw r4,SL_DBAT1(r11) - mfdbatl r4,1 - stw r4,SL_DBAT1+4(r11) - mfdbatu r4,2 - stw r4,SL_DBAT2(r11) - mfdbatl r4,2 - stw r4,SL_DBAT2+4(r11) - mfdbatu r4,3 - stw r4,SL_DBAT3(r11) - mfdbatl r4,3 - stw r4,SL_DBAT3+4(r11) - mfibatu r4,0 - stw r4,SL_IBAT0(r11) - mfibatl r4,0 - stw r4,SL_IBAT0+4(r11) - mfibatu r4,1 - stw r4,SL_IBAT1(r11) - mfibatl r4,1 - stw r4,SL_IBAT1+4(r11) - mfibatu r4,2 - stw r4,SL_IBAT2(r11) - mfibatl r4,2 - stw r4,SL_IBAT2+4(r11) - mfibatu r4,3 - stw r4,SL_IBAT3(r11) - mfibatl r4,3 - stw r4,SL_IBAT3+4(r11) - -#if 0 - /* Backup various CPU config stuffs */ - bl __save_cpu_setup -#endif - /* Call the low level suspend stuff (we should probably have made - * a stackframe... - */ - bl swsusp_save - - /* Restore LR from the save area */ - lis r11,swsusp_save_area@h - ori r11,r11,swsusp_save_area@l - lwz r0,SL_LR(r11) - mtlr r0 - - blr - - -/* Resume code */ -_GLOBAL(swsusp_arch_resume) - - /* Stop pending alitvec streams and memory accesses */ -BEGIN_FTR_SECTION - DSSALL -END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) - sync - - /* Disable MSR:DR to make sure we don't take a TLB or - * hash miss during the copy, as our hash table will - * for a while be unuseable. For .text, we assume we are - * covered by a BAT. This works only for non-G5 at this - * point. G5 will need a better approach, possibly using - * a small temporary hash table filled with large mappings, - * disabling the MMU completely isn't a good option for - * performance reasons. - * (Note that 750's may have the same performance issue as - * the G5 in this case, we should investigate using moving - * BATs for these CPUs) - */ - mfmsr r0 - sync - rlwinm r0,r0,0,28,26 /* clear MSR_DR */ - mtmsr r0 - sync - isync - - /* Load ptr the list of pages to copy in r3 */ - lis r11,(pagedir_nosave - KERNELBASE)@h - ori r11,r11,pagedir_nosave@l - lwz r10,0(r11) - - /* Copy the pages. This is a very basic implementation, to - * be replaced by something more cache efficient */ -1: - tophys(r3,r10) - li r0,256 - mtctr r0 - lwz r11,pbe_address(r3) /* source */ - tophys(r5,r11) - lwz r10,pbe_orig_address(r3) /* destination */ - tophys(r6,r10) -2: - lwz r8,0(r5) - lwz r9,4(r5) - lwz r10,8(r5) - lwz r11,12(r5) - addi r5,r5,16 - stw r8,0(r6) - stw r9,4(r6) - stw r10,8(r6) - stw r11,12(r6) - addi r6,r6,16 - bdnz 2b - lwz r10,pbe_next(r3) - cmpwi 0,r10,0 - bne 1b - - /* Do a very simple cache flush/inval of the L1 to ensure - * coherency of the icache - */ - lis r3,0x0002 - mtctr r3 - li r3, 0 -1: - lwz r0,0(r3) - addi r3,r3,0x0020 - bdnz 1b - isync - sync - - /* Now flush those cache lines */ - lis r3,0x0002 - mtctr r3 - li r3, 0 -1: - dcbf 0,r3 - addi r3,r3,0x0020 - bdnz 1b - sync - - /* Ok, we are now running with the kernel data of the old - * kernel fully restored. We can get to the save area - * easily now. As for the rest of the code, it assumes the - * loader kernel and the booted one are exactly identical - */ - lis r11,swsusp_save_area@h - ori r11,r11,swsusp_save_area@l - tophys(r11,r11) - -#if 0 - /* Restore various CPU config stuffs */ - bl __restore_cpu_setup -#endif - /* Restore the BATs, and SDR1. Then we can turn on the MMU. - * This is a bit hairy as we are running out of those BATs, - * but first, our code is probably in the icache, and we are - * writing the same value to the BAT, so that should be fine, - * though a better solution will have to be found long-term - */ - lwz r4,SL_SDR1(r11) - mtsdr1 r4 - lwz r4,SL_SPRG0(r11) - mtsprg 0,r4 - lwz r4,SL_SPRG0+4(r11) - mtsprg 1,r4 - lwz r4,SL_SPRG0+8(r11) - mtsprg 2,r4 - lwz r4,SL_SPRG0+12(r11) - mtsprg 3,r4 - -#if 0 - lwz r4,SL_DBAT0(r11) - mtdbatu 0,r4 - lwz r4,SL_DBAT0+4(r11) - mtdbatl 0,r4 - lwz r4,SL_DBAT1(r11) - mtdbatu 1,r4 - lwz r4,SL_DBAT1+4(r11) - mtdbatl 1,r4 - lwz r4,SL_DBAT2(r11) - mtdbatu 2,r4 - lwz r4,SL_DBAT2+4(r11) - mtdbatl 2,r4 - lwz r4,SL_DBAT3(r11) - mtdbatu 3,r4 - lwz r4,SL_DBAT3+4(r11) - mtdbatl 3,r4 - lwz r4,SL_IBAT0(r11) - mtibatu 0,r4 - lwz r4,SL_IBAT0+4(r11) - mtibatl 0,r4 - lwz r4,SL_IBAT1(r11) - mtibatu 1,r4 - lwz r4,SL_IBAT1+4(r11) - mtibatl 1,r4 - lwz r4,SL_IBAT2(r11) - mtibatu 2,r4 - lwz r4,SL_IBAT2+4(r11) - mtibatl 2,r4 - lwz r4,SL_IBAT3(r11) - mtibatu 3,r4 - lwz r4,SL_IBAT3+4(r11) - mtibatl 3,r4 -#endif - -BEGIN_FTR_SECTION - li r4,0 - mtspr SPRN_DBAT4U,r4 - mtspr SPRN_DBAT4L,r4 - mtspr SPRN_DBAT5U,r4 - mtspr SPRN_DBAT5L,r4 - mtspr SPRN_DBAT6U,r4 - mtspr SPRN_DBAT6L,r4 - mtspr SPRN_DBAT7U,r4 - mtspr SPRN_DBAT7L,r4 - mtspr SPRN_IBAT4U,r4 - mtspr SPRN_IBAT4L,r4 - mtspr SPRN_IBAT5U,r4 - mtspr SPRN_IBAT5L,r4 - mtspr SPRN_IBAT6U,r4 - mtspr SPRN_IBAT6L,r4 - mtspr SPRN_IBAT7U,r4 - mtspr SPRN_IBAT7L,r4 -END_FTR_SECTION_IFSET(CPU_FTR_HAS_HIGH_BATS) - - /* Flush all TLBs */ - lis r4,0x1000 -1: addic. r4,r4,-0x1000 - tlbie r4 - blt 1b - sync - - /* restore the MSR and turn on the MMU */ - lwz r3,SL_MSR(r11) - bl turn_on_mmu - tovirt(r11,r11) - - /* Restore TB */ - li r3,0 - mttbl r3 - lwz r3,SL_TB(r11) - lwz r4,SL_TB+4(r11) - mttbu r3 - mttbl r4 - - /* Kick decrementer */ - li r0,1 - mtdec r0 - - /* Restore the callee-saved registers and return */ - lwz r0,SL_CR(r11) - mtcr r0 - lwz r2,SL_R2(r11) - lmw r12,SL_R12(r11) - lwz r1,SL_SP(r11) - lwz r0,SL_LR(r11) - mtlr r0 - - // XXX Note: we don't really need to call swsusp_resume - - li r3,0 - blr - -/* FIXME:This construct is actually not useful since we don't shut - * down the instruction MMU, we could just flip back MSR-DR on. - */ -turn_on_mmu: - mflr r4 - mtsrr0 r4 - mtsrr1 r3 - sync - isync - rfi - -- cgit v1.2.3-18-g5258 From ed981856ca8af30912fd61a6a4ac8d30a453a5ec Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 27 Mar 2006 19:28:58 +1100 Subject: powerpc: Move module.c over to arch/powerpc ... and rename it to module_32.c since it is the 32-bit version. The 32-bit and 64-bit ABIs are sufficiently different that having a merged version isn't really practical. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/Makefile | 3 + arch/powerpc/kernel/module_32.c | 320 ++++++++++++++++++++++++++++++++++++++++ arch/ppc/kernel/Makefile | 3 +- arch/ppc/kernel/module.c | 320 ---------------------------------------- 4 files changed, 324 insertions(+), 322 deletions(-) create mode 100644 arch/powerpc/kernel/module_32.c delete mode 100644 arch/ppc/kernel/module.c (limited to 'arch') diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 754c227835b..b86d380f01b 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -36,6 +36,8 @@ obj64-$(CONFIG_PPC_MULTIPLATFORM) += nvram_64.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o obj-$(CONFIG_6xx) += idle_6xx.o l2cr_6xx.o cpu_setup_6xx.o obj-$(CONFIG_TAU) += tau_6xx.o +obj32-$(CONFIG_SOFTWARE_SUSPEND) += swsusp_32.o +obj32-$(CONFIG_MODULES) += module_32.o ifeq ($(CONFIG_PPC_MERGE),y) @@ -78,6 +80,7 @@ smpobj-$(CONFIG_SMP) += smp.o endif +obj-$(CONFIG_PPC32) += $(obj32-y) obj-$(CONFIG_PPC64) += $(obj64-y) extra-$(CONFIG_PPC_FPU) += fpu.o diff --git a/arch/powerpc/kernel/module_32.c b/arch/powerpc/kernel/module_32.c new file mode 100644 index 00000000000..92f4e5f64f0 --- /dev/null +++ b/arch/powerpc/kernel/module_32.c @@ -0,0 +1,320 @@ +/* Kernel module help for PPC. + Copyright (C) 2001 Rusty Russell. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ +#include +#include +#include +#include +#include +#include +#include +#include + +#if 0 +#define DEBUGP printk +#else +#define DEBUGP(fmt , ...) +#endif + +LIST_HEAD(module_bug_list); + +void *module_alloc(unsigned long size) +{ + if (size == 0) + return NULL; + return vmalloc(size); +} + +/* Free memory returned from module_alloc */ +void module_free(struct module *mod, void *module_region) +{ + vfree(module_region); + /* FIXME: If module_region == mod->init_region, trim exception + table entries. */ +} + +/* Count how many different relocations (different symbol, different + addend) */ +static unsigned int count_relocs(const Elf32_Rela *rela, unsigned int num) +{ + unsigned int i, j, ret = 0; + + /* Sure, this is order(n^2), but it's usually short, and not + time critical */ + for (i = 0; i < num; i++) { + for (j = 0; j < i; j++) { + /* If this addend appeared before, it's + already been counted */ + if (ELF32_R_SYM(rela[i].r_info) + == ELF32_R_SYM(rela[j].r_info) + && rela[i].r_addend == rela[j].r_addend) + break; + } + if (j == i) ret++; + } + return ret; +} + +/* Get the potential trampolines size required of the init and + non-init sections */ +static unsigned long get_plt_size(const Elf32_Ehdr *hdr, + const Elf32_Shdr *sechdrs, + const char *secstrings, + int is_init) +{ + unsigned long ret = 0; + unsigned i; + + /* Everything marked ALLOC (this includes the exported + symbols) */ + for (i = 1; i < hdr->e_shnum; i++) { + /* If it's called *.init*, and we're not init, we're + not interested */ + if ((strstr(secstrings + sechdrs[i].sh_name, ".init") != 0) + != is_init) + continue; + + /* We don't want to look at debug sections. */ + if (strstr(secstrings + sechdrs[i].sh_name, ".debug") != 0) + continue; + + if (sechdrs[i].sh_type == SHT_RELA) { + DEBUGP("Found relocations in section %u\n", i); + DEBUGP("Ptr: %p. Number: %u\n", + (void *)hdr + sechdrs[i].sh_offset, + sechdrs[i].sh_size / sizeof(Elf32_Rela)); + ret += count_relocs((void *)hdr + + sechdrs[i].sh_offset, + sechdrs[i].sh_size + / sizeof(Elf32_Rela)) + * sizeof(struct ppc_plt_entry); + } + } + + return ret; +} + +int module_frob_arch_sections(Elf32_Ehdr *hdr, + Elf32_Shdr *sechdrs, + char *secstrings, + struct module *me) +{ + unsigned int i; + + /* Find .plt and .init.plt sections */ + for (i = 0; i < hdr->e_shnum; i++) { + if (strcmp(secstrings + sechdrs[i].sh_name, ".init.plt") == 0) + me->arch.init_plt_section = i; + else if (strcmp(secstrings + sechdrs[i].sh_name, ".plt") == 0) + me->arch.core_plt_section = i; + } + if (!me->arch.core_plt_section || !me->arch.init_plt_section) { + printk("Module doesn't contain .plt or .init.plt sections.\n"); + return -ENOEXEC; + } + + /* Override their sizes */ + sechdrs[me->arch.core_plt_section].sh_size + = get_plt_size(hdr, sechdrs, secstrings, 0); + sechdrs[me->arch.init_plt_section].sh_size + = get_plt_size(hdr, sechdrs, secstrings, 1); + return 0; +} + +int apply_relocate(Elf32_Shdr *sechdrs, + const char *strtab, + unsigned int symindex, + unsigned int relsec, + struct module *module) +{ + printk(KERN_ERR "%s: Non-ADD RELOCATION unsupported\n", + module->name); + return -ENOEXEC; +} + +static inline int entry_matches(struct ppc_plt_entry *entry, Elf32_Addr val) +{ + if (entry->jump[0] == 0x3d600000 + ((val + 0x8000) >> 16) + && entry->jump[1] == 0x396b0000 + (val & 0xffff)) + return 1; + return 0; +} + +/* Set up a trampoline in the PLT to bounce us to the distant function */ +static uint32_t do_plt_call(void *location, + Elf32_Addr val, + Elf32_Shdr *sechdrs, + struct module *mod) +{ + struct ppc_plt_entry *entry; + + DEBUGP("Doing plt for call to 0x%x at 0x%x\n", val, (unsigned int)location); + /* Init, or core PLT? */ + if (location >= mod->module_core + && location < mod->module_core + mod->core_size) + entry = (void *)sechdrs[mod->arch.core_plt_section].sh_addr; + else + entry = (void *)sechdrs[mod->arch.init_plt_section].sh_addr; + + /* Find this entry, or if that fails, the next avail. entry */ + while (entry->jump[0]) { + if (entry_matches(entry, val)) return (uint32_t)entry; + entry++; + } + + /* Stolen from Paul Mackerras as well... */ + entry->jump[0] = 0x3d600000+((val+0x8000)>>16); /* lis r11,sym@ha */ + entry->jump[1] = 0x396b0000 + (val&0xffff); /* addi r11,r11,sym@l*/ + entry->jump[2] = 0x7d6903a6; /* mtctr r11 */ + entry->jump[3] = 0x4e800420; /* bctr */ + + DEBUGP("Initialized plt for 0x%x at %p\n", val, entry); + return (uint32_t)entry; +} + +int apply_relocate_add(Elf32_Shdr *sechdrs, + const char *strtab, + unsigned int symindex, + unsigned int relsec, + struct module *module) +{ + unsigned int i; + Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr; + Elf32_Sym *sym; + uint32_t *location; + uint32_t value; + + DEBUGP("Applying ADD relocate section %u to %u\n", relsec, + sechdrs[relsec].sh_info); + for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rela); i++) { + /* This is where to make the change */ + location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr + + rela[i].r_offset; + /* This is the symbol it is referring to. Note that all + undefined symbols have been resolved. */ + sym = (Elf32_Sym *)sechdrs[symindex].sh_addr + + ELF32_R_SYM(rela[i].r_info); + /* `Everything is relative'. */ + value = sym->st_value + rela[i].r_addend; + + switch (ELF32_R_TYPE(rela[i].r_info)) { + case R_PPC_ADDR32: + /* Simply set it */ + *(uint32_t *)location = value; + break; + + case R_PPC_ADDR16_LO: + /* Low half of the symbol */ + *(uint16_t *)location = value; + break; + + case R_PPC_ADDR16_HA: + /* Sign-adjusted lower 16 bits: PPC ELF ABI says: + (((x >> 16) + ((x & 0x8000) ? 1 : 0))) & 0xFFFF. + This is the same, only sane. + */ + *(uint16_t *)location = (value + 0x8000) >> 16; + break; + + case R_PPC_REL24: + if ((int)(value - (uint32_t)location) < -0x02000000 + || (int)(value - (uint32_t)location) >= 0x02000000) + value = do_plt_call(location, value, + sechdrs, module); + + /* Only replace bits 2 through 26 */ + DEBUGP("REL24 value = %08X. location = %08X\n", + value, (uint32_t)location); + DEBUGP("Location before: %08X.\n", + *(uint32_t *)location); + *(uint32_t *)location + = (*(uint32_t *)location & ~0x03fffffc) + | ((value - (uint32_t)location) + & 0x03fffffc); + DEBUGP("Location after: %08X.\n", + *(uint32_t *)location); + DEBUGP("ie. jump to %08X+%08X = %08X\n", + *(uint32_t *)location & 0x03fffffc, + (uint32_t)location, + (*(uint32_t *)location & 0x03fffffc) + + (uint32_t)location); + break; + + case R_PPC_REL32: + /* 32-bit relative jump. */ + *(uint32_t *)location = value - (uint32_t)location; + break; + + default: + printk("%s: unknown ADD relocation: %u\n", + module->name, + ELF32_R_TYPE(rela[i].r_info)); + return -ENOEXEC; + } + } + return 0; +} + +int module_finalize(const Elf_Ehdr *hdr, + const Elf_Shdr *sechdrs, + struct module *me) +{ + char *secstrings; + unsigned int i; + + me->arch.bug_table = NULL; + me->arch.num_bugs = 0; + + /* Find the __bug_table section, if present */ + secstrings = (char *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; + for (i = 1; i < hdr->e_shnum; i++) { + if (strcmp(secstrings+sechdrs[i].sh_name, "__bug_table")) + continue; + me->arch.bug_table = (void *) sechdrs[i].sh_addr; + me->arch.num_bugs = sechdrs[i].sh_size / sizeof(struct bug_entry); + break; + } + + /* + * Strictly speaking this should have a spinlock to protect against + * traversals, but since we only traverse on BUG()s, a spinlock + * could potentially lead to deadlock and thus be counter-productive. + */ + list_add(&me->arch.bug_list, &module_bug_list); + + return 0; +} + +void module_arch_cleanup(struct module *mod) +{ + list_del(&mod->arch.bug_list); +} + +struct bug_entry *module_find_bug(unsigned long bugaddr) +{ + struct mod_arch_specific *mod; + unsigned int i; + struct bug_entry *bug; + + list_for_each_entry(mod, &module_bug_list, bug_list) { + bug = mod->bug_table; + for (i = 0; i < mod->num_bugs; ++i, ++bug) + if (bugaddr == bug->bug_addr) + return bug; + } + return NULL; +} diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index 8ac1dd95841..e55d7ee1795 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile @@ -13,7 +13,7 @@ extra-y += vmlinux.lds obj-y := entry.o traps.o time.o misc.o \ setup.o \ ppc_htab.o -obj-$(CONFIG_MODULES) += module.o ppc_ksyms.o +obj-$(CONFIG_MODULES) += ppc_ksyms.o obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-mapping.o obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_RAPIDIO) += rio.o @@ -31,7 +31,6 @@ endif # These are here while we do the architecture merge else -obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-mapping.o obj-$(CONFIG_KGDB) += ppc-stub.o ifndef CONFIG_E200 diff --git a/arch/ppc/kernel/module.c b/arch/ppc/kernel/module.c deleted file mode 100644 index 92f4e5f64f0..00000000000 --- a/arch/ppc/kernel/module.c +++ /dev/null @@ -1,320 +0,0 @@ -/* Kernel module help for PPC. - Copyright (C) 2001 Rusty Russell. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ -#include -#include -#include -#include -#include -#include -#include -#include - -#if 0 -#define DEBUGP printk -#else -#define DEBUGP(fmt , ...) -#endif - -LIST_HEAD(module_bug_list); - -void *module_alloc(unsigned long size) -{ - if (size == 0) - return NULL; - return vmalloc(size); -} - -/* Free memory returned from module_alloc */ -void module_free(struct module *mod, void *module_region) -{ - vfree(module_region); - /* FIXME: If module_region == mod->init_region, trim exception - table entries. */ -} - -/* Count how many different relocations (different symbol, different - addend) */ -static unsigned int count_relocs(const Elf32_Rela *rela, unsigned int num) -{ - unsigned int i, j, ret = 0; - - /* Sure, this is order(n^2), but it's usually short, and not - time critical */ - for (i = 0; i < num; i++) { - for (j = 0; j < i; j++) { - /* If this addend appeared before, it's - already been counted */ - if (ELF32_R_SYM(rela[i].r_info) - == ELF32_R_SYM(rela[j].r_info) - && rela[i].r_addend == rela[j].r_addend) - break; - } - if (j == i) ret++; - } - return ret; -} - -/* Get the potential trampolines size required of the init and - non-init sections */ -static unsigned long get_plt_size(const Elf32_Ehdr *hdr, - const Elf32_Shdr *sechdrs, - const char *secstrings, - int is_init) -{ - unsigned long ret = 0; - unsigned i; - - /* Everything marked ALLOC (this includes the exported - symbols) */ - for (i = 1; i < hdr->e_shnum; i++) { - /* If it's called *.init*, and we're not init, we're - not interested */ - if ((strstr(secstrings + sechdrs[i].sh_name, ".init") != 0) - != is_init) - continue; - - /* We don't want to look at debug sections. */ - if (strstr(secstrings + sechdrs[i].sh_name, ".debug") != 0) - continue; - - if (sechdrs[i].sh_type == SHT_RELA) { - DEBUGP("Found relocations in section %u\n", i); - DEBUGP("Ptr: %p. Number: %u\n", - (void *)hdr + sechdrs[i].sh_offset, - sechdrs[i].sh_size / sizeof(Elf32_Rela)); - ret += count_relocs((void *)hdr - + sechdrs[i].sh_offset, - sechdrs[i].sh_size - / sizeof(Elf32_Rela)) - * sizeof(struct ppc_plt_entry); - } - } - - return ret; -} - -int module_frob_arch_sections(Elf32_Ehdr *hdr, - Elf32_Shdr *sechdrs, - char *secstrings, - struct module *me) -{ - unsigned int i; - - /* Find .plt and .init.plt sections */ - for (i = 0; i < hdr->e_shnum; i++) { - if (strcmp(secstrings + sechdrs[i].sh_name, ".init.plt") == 0) - me->arch.init_plt_section = i; - else if (strcmp(secstrings + sechdrs[i].sh_name, ".plt") == 0) - me->arch.core_plt_section = i; - } - if (!me->arch.core_plt_section || !me->arch.init_plt_section) { - printk("Module doesn't contain .plt or .init.plt sections.\n"); - return -ENOEXEC; - } - - /* Override their sizes */ - sechdrs[me->arch.core_plt_section].sh_size - = get_plt_size(hdr, sechdrs, secstrings, 0); - sechdrs[me->arch.init_plt_section].sh_size - = get_plt_size(hdr, sechdrs, secstrings, 1); - return 0; -} - -int apply_relocate(Elf32_Shdr *sechdrs, - const char *strtab, - unsigned int symindex, - unsigned int relsec, - struct module *module) -{ - printk(KERN_ERR "%s: Non-ADD RELOCATION unsupported\n", - module->name); - return -ENOEXEC; -} - -static inline int entry_matches(struct ppc_plt_entry *entry, Elf32_Addr val) -{ - if (entry->jump[0] == 0x3d600000 + ((val + 0x8000) >> 16) - && entry->jump[1] == 0x396b0000 + (val & 0xffff)) - return 1; - return 0; -} - -/* Set up a trampoline in the PLT to bounce us to the distant function */ -static uint32_t do_plt_call(void *location, - Elf32_Addr val, - Elf32_Shdr *sechdrs, - struct module *mod) -{ - struct ppc_plt_entry *entry; - - DEBUGP("Doing plt for call to 0x%x at 0x%x\n", val, (unsigned int)location); - /* Init, or core PLT? */ - if (location >= mod->module_core - && location < mod->module_core + mod->core_size) - entry = (void *)sechdrs[mod->arch.core_plt_section].sh_addr; - else - entry = (void *)sechdrs[mod->arch.init_plt_section].sh_addr; - - /* Find this entry, or if that fails, the next avail. entry */ - while (entry->jump[0]) { - if (entry_matches(entry, val)) return (uint32_t)entry; - entry++; - } - - /* Stolen from Paul Mackerras as well... */ - entry->jump[0] = 0x3d600000+((val+0x8000)>>16); /* lis r11,sym@ha */ - entry->jump[1] = 0x396b0000 + (val&0xffff); /* addi r11,r11,sym@l*/ - entry->jump[2] = 0x7d6903a6; /* mtctr r11 */ - entry->jump[3] = 0x4e800420; /* bctr */ - - DEBUGP("Initialized plt for 0x%x at %p\n", val, entry); - return (uint32_t)entry; -} - -int apply_relocate_add(Elf32_Shdr *sechdrs, - const char *strtab, - unsigned int symindex, - unsigned int relsec, - struct module *module) -{ - unsigned int i; - Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr; - Elf32_Sym *sym; - uint32_t *location; - uint32_t value; - - DEBUGP("Applying ADD relocate section %u to %u\n", relsec, - sechdrs[relsec].sh_info); - for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rela); i++) { - /* This is where to make the change */ - location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr - + rela[i].r_offset; - /* This is the symbol it is referring to. Note that all - undefined symbols have been resolved. */ - sym = (Elf32_Sym *)sechdrs[symindex].sh_addr - + ELF32_R_SYM(rela[i].r_info); - /* `Everything is relative'. */ - value = sym->st_value + rela[i].r_addend; - - switch (ELF32_R_TYPE(rela[i].r_info)) { - case R_PPC_ADDR32: - /* Simply set it */ - *(uint32_t *)location = value; - break; - - case R_PPC_ADDR16_LO: - /* Low half of the symbol */ - *(uint16_t *)location = value; - break; - - case R_PPC_ADDR16_HA: - /* Sign-adjusted lower 16 bits: PPC ELF ABI says: - (((x >> 16) + ((x & 0x8000) ? 1 : 0))) & 0xFFFF. - This is the same, only sane. - */ - *(uint16_t *)location = (value + 0x8000) >> 16; - break; - - case R_PPC_REL24: - if ((int)(value - (uint32_t)location) < -0x02000000 - || (int)(value - (uint32_t)location) >= 0x02000000) - value = do_plt_call(location, value, - sechdrs, module); - - /* Only replace bits 2 through 26 */ - DEBUGP("REL24 value = %08X. location = %08X\n", - value, (uint32_t)location); - DEBUGP("Location before: %08X.\n", - *(uint32_t *)location); - *(uint32_t *)location - = (*(uint32_t *)location & ~0x03fffffc) - | ((value - (uint32_t)location) - & 0x03fffffc); - DEBUGP("Location after: %08X.\n", - *(uint32_t *)location); - DEBUGP("ie. jump to %08X+%08X = %08X\n", - *(uint32_t *)location & 0x03fffffc, - (uint32_t)location, - (*(uint32_t *)location & 0x03fffffc) - + (uint32_t)location); - break; - - case R_PPC_REL32: - /* 32-bit relative jump. */ - *(uint32_t *)location = value - (uint32_t)location; - break; - - default: - printk("%s: unknown ADD relocation: %u\n", - module->name, - ELF32_R_TYPE(rela[i].r_info)); - return -ENOEXEC; - } - } - return 0; -} - -int module_finalize(const Elf_Ehdr *hdr, - const Elf_Shdr *sechdrs, - struct module *me) -{ - char *secstrings; - unsigned int i; - - me->arch.bug_table = NULL; - me->arch.num_bugs = 0; - - /* Find the __bug_table section, if present */ - secstrings = (char *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; - for (i = 1; i < hdr->e_shnum; i++) { - if (strcmp(secstrings+sechdrs[i].sh_name, "__bug_table")) - continue; - me->arch.bug_table = (void *) sechdrs[i].sh_addr; - me->arch.num_bugs = sechdrs[i].sh_size / sizeof(struct bug_entry); - break; - } - - /* - * Strictly speaking this should have a spinlock to protect against - * traversals, but since we only traverse on BUG()s, a spinlock - * could potentially lead to deadlock and thus be counter-productive. - */ - list_add(&me->arch.bug_list, &module_bug_list); - - return 0; -} - -void module_arch_cleanup(struct module *mod) -{ - list_del(&mod->arch.bug_list); -} - -struct bug_entry *module_find_bug(unsigned long bugaddr) -{ - struct mod_arch_specific *mod; - unsigned int i; - struct bug_entry *bug; - - list_for_each_entry(mod, &module_bug_list, bug_list) { - bug = mod->bug_table; - for (i = 0; i < mod->num_bugs; ++i, ++bug) - if (bugaddr == bug->bug_addr) - return bug; - } - return NULL; -} -- cgit v1.2.3-18-g5258 From 7bebd83dbf096d0bf4b4bfbaf5d8844a05f5eafc Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 27 Mar 2006 01:07:55 -0800 Subject: [SPARC64]: Fix off-by-1 error in TSB grow check. The worst part about this bug is what it would cause a hugepage TSB to be allocated for every address space since "0 >= 0". Signed-off-by: David S. Miller --- arch/sparc64/mm/fault.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/mm/fault.c b/arch/sparc64/mm/fault.c index d21ff3230c0..0db2f7d9fab 100644 --- a/arch/sparc64/mm/fault.c +++ b/arch/sparc64/mm/fault.c @@ -413,12 +413,12 @@ good_area: #ifdef CONFIG_HUGETLB_PAGE mm_rss -= (mm->context.huge_pte_count * (HPAGE_SIZE / PAGE_SIZE)); #endif - if (unlikely(mm_rss >= + if (unlikely(mm_rss > mm->context.tsb_block[MM_TSB_BASE].tsb_rss_limit)) tsb_grow(mm, MM_TSB_BASE, mm_rss); #ifdef CONFIG_HUGETLB_PAGE mm_rss = mm->context.huge_pte_count; - if (unlikely(mm_rss >= + if (unlikely(mm_rss > mm->context.tsb_block[MM_TSB_HUGE].tsb_rss_limit)) tsb_grow(mm, MM_TSB_HUGE, mm_rss); #endif -- cgit v1.2.3-18-g5258 From 8b844dd7591a820a618a8fb33c9c43186d43d1b9 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 27 Mar 2006 20:09:04 +1100 Subject: powerpc: Move perfmon_fsl_booke.c over to arch/powerpc Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/Makefile | 1 + arch/powerpc/kernel/perfmon_fsl_booke.c | 222 ++++++++++++++++++++++++++++++++ arch/ppc/kernel/Makefile | 6 - arch/ppc/kernel/perfmon_fsl_booke.c | 222 -------------------------------- 4 files changed, 223 insertions(+), 228 deletions(-) create mode 100644 arch/powerpc/kernel/perfmon_fsl_booke.c delete mode 100644 arch/ppc/kernel/perfmon_fsl_booke.c (limited to 'arch') diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index b86d380f01b..0cc0995b81b 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -38,6 +38,7 @@ obj-$(CONFIG_6xx) += idle_6xx.o l2cr_6xx.o cpu_setup_6xx.o obj-$(CONFIG_TAU) += tau_6xx.o obj32-$(CONFIG_SOFTWARE_SUSPEND) += swsusp_32.o obj32-$(CONFIG_MODULES) += module_32.o +obj-$(CONFIG_E500) += perfmon_fsl_booke.o ifeq ($(CONFIG_PPC_MERGE),y) diff --git a/arch/powerpc/kernel/perfmon_fsl_booke.c b/arch/powerpc/kernel/perfmon_fsl_booke.c new file mode 100644 index 00000000000..32455dfcc36 --- /dev/null +++ b/arch/powerpc/kernel/perfmon_fsl_booke.c @@ -0,0 +1,222 @@ +/* kernel/perfmon_fsl_booke.c + * Freescale Book-E Performance Monitor code + * + * Author: Andy Fleming + * Copyright (c) 2004 Freescale Semiconductor, Inc + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +static inline u32 get_pmlca(int ctr); +static inline void set_pmlca(int ctr, u32 pmlca); + +static inline u32 get_pmlca(int ctr) +{ + u32 pmlca; + + switch (ctr) { + case 0: + pmlca = mfpmr(PMRN_PMLCA0); + break; + case 1: + pmlca = mfpmr(PMRN_PMLCA1); + break; + case 2: + pmlca = mfpmr(PMRN_PMLCA2); + break; + case 3: + pmlca = mfpmr(PMRN_PMLCA3); + break; + default: + panic("Bad ctr number\n"); + } + + return pmlca; +} + +static inline void set_pmlca(int ctr, u32 pmlca) +{ + switch (ctr) { + case 0: + mtpmr(PMRN_PMLCA0, pmlca); + break; + case 1: + mtpmr(PMRN_PMLCA1, pmlca); + break; + case 2: + mtpmr(PMRN_PMLCA2, pmlca); + break; + case 3: + mtpmr(PMRN_PMLCA3, pmlca); + break; + default: + panic("Bad ctr number\n"); + } +} + +void init_pmc_stop(int ctr) +{ + u32 pmlca = (PMLCA_FC | PMLCA_FCS | PMLCA_FCU | + PMLCA_FCM1 | PMLCA_FCM0); + u32 pmlcb = 0; + + switch (ctr) { + case 0: + mtpmr(PMRN_PMLCA0, pmlca); + mtpmr(PMRN_PMLCB0, pmlcb); + break; + case 1: + mtpmr(PMRN_PMLCA1, pmlca); + mtpmr(PMRN_PMLCB1, pmlcb); + break; + case 2: + mtpmr(PMRN_PMLCA2, pmlca); + mtpmr(PMRN_PMLCB2, pmlcb); + break; + case 3: + mtpmr(PMRN_PMLCA3, pmlca); + mtpmr(PMRN_PMLCB3, pmlcb); + break; + default: + panic("Bad ctr number!\n"); + } +} + +void set_pmc_event(int ctr, int event) +{ + u32 pmlca; + + pmlca = get_pmlca(ctr); + + pmlca = (pmlca & ~PMLCA_EVENT_MASK) | + ((event << PMLCA_EVENT_SHIFT) & + PMLCA_EVENT_MASK); + + set_pmlca(ctr, pmlca); +} + +void set_pmc_user_kernel(int ctr, int user, int kernel) +{ + u32 pmlca; + + pmlca = get_pmlca(ctr); + + if(user) + pmlca &= ~PMLCA_FCU; + else + pmlca |= PMLCA_FCU; + + if(kernel) + pmlca &= ~PMLCA_FCS; + else + pmlca |= PMLCA_FCS; + + set_pmlca(ctr, pmlca); +} + +void set_pmc_marked(int ctr, int mark0, int mark1) +{ + u32 pmlca = get_pmlca(ctr); + + if(mark0) + pmlca &= ~PMLCA_FCM0; + else + pmlca |= PMLCA_FCM0; + + if(mark1) + pmlca &= ~PMLCA_FCM1; + else + pmlca |= PMLCA_FCM1; + + set_pmlca(ctr, pmlca); +} + +void pmc_start_ctr(int ctr, int enable) +{ + u32 pmlca = get_pmlca(ctr); + + pmlca &= ~PMLCA_FC; + + if (enable) + pmlca |= PMLCA_CE; + else + pmlca &= ~PMLCA_CE; + + set_pmlca(ctr, pmlca); +} + +void pmc_start_ctrs(int enable) +{ + u32 pmgc0 = mfpmr(PMRN_PMGC0); + + pmgc0 &= ~PMGC0_FAC; + pmgc0 |= PMGC0_FCECE; + + if (enable) + pmgc0 |= PMGC0_PMIE; + else + pmgc0 &= ~PMGC0_PMIE; + + mtpmr(PMRN_PMGC0, pmgc0); +} + +void pmc_stop_ctrs(void) +{ + u32 pmgc0 = mfpmr(PMRN_PMGC0); + + pmgc0 |= PMGC0_FAC; + + pmgc0 &= ~(PMGC0_PMIE | PMGC0_FCECE); + + mtpmr(PMRN_PMGC0, pmgc0); +} + +void dump_pmcs(void) +{ + printk("pmgc0: %x\n", mfpmr(PMRN_PMGC0)); + printk("pmc\t\tpmlca\t\tpmlcb\n"); + printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC0), + mfpmr(PMRN_PMLCA0), mfpmr(PMRN_PMLCB0)); + printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC1), + mfpmr(PMRN_PMLCA1), mfpmr(PMRN_PMLCB1)); + printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC2), + mfpmr(PMRN_PMLCA2), mfpmr(PMRN_PMLCB2)); + printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC3), + mfpmr(PMRN_PMLCA3), mfpmr(PMRN_PMLCB3)); +} + +EXPORT_SYMBOL(init_pmc_stop); +EXPORT_SYMBOL(set_pmc_event); +EXPORT_SYMBOL(set_pmc_user_kernel); +EXPORT_SYMBOL(set_pmc_marked); +EXPORT_SYMBOL(pmc_start_ctr); +EXPORT_SYMBOL(pmc_start_ctrs); +EXPORT_SYMBOL(pmc_stop_ctrs); +EXPORT_SYMBOL(dump_pmcs); diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index e55d7ee1795..4b7a05655cf 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile @@ -19,9 +19,6 @@ obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_RAPIDIO) += rio.o obj-$(CONFIG_KGDB) += ppc-stub.o obj-$(CONFIG_SMP) += smp.o smp-tbsync.o -ifndef CONFIG_E200 -obj-$(CONFIG_FSL_BOOKE) += perfmon_fsl_booke.o -endif obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o ifndef CONFIG_MATH_EMULATION @@ -33,7 +30,4 @@ endif else obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-mapping.o obj-$(CONFIG_KGDB) += ppc-stub.o -ifndef CONFIG_E200 -obj-$(CONFIG_FSL_BOOKE) += perfmon_fsl_booke.o -endif endif diff --git a/arch/ppc/kernel/perfmon_fsl_booke.c b/arch/ppc/kernel/perfmon_fsl_booke.c deleted file mode 100644 index 32455dfcc36..00000000000 --- a/arch/ppc/kernel/perfmon_fsl_booke.c +++ /dev/null @@ -1,222 +0,0 @@ -/* kernel/perfmon_fsl_booke.c - * Freescale Book-E Performance Monitor code - * - * Author: Andy Fleming - * Copyright (c) 2004 Freescale Semiconductor, Inc - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -static inline u32 get_pmlca(int ctr); -static inline void set_pmlca(int ctr, u32 pmlca); - -static inline u32 get_pmlca(int ctr) -{ - u32 pmlca; - - switch (ctr) { - case 0: - pmlca = mfpmr(PMRN_PMLCA0); - break; - case 1: - pmlca = mfpmr(PMRN_PMLCA1); - break; - case 2: - pmlca = mfpmr(PMRN_PMLCA2); - break; - case 3: - pmlca = mfpmr(PMRN_PMLCA3); - break; - default: - panic("Bad ctr number\n"); - } - - return pmlca; -} - -static inline void set_pmlca(int ctr, u32 pmlca) -{ - switch (ctr) { - case 0: - mtpmr(PMRN_PMLCA0, pmlca); - break; - case 1: - mtpmr(PMRN_PMLCA1, pmlca); - break; - case 2: - mtpmr(PMRN_PMLCA2, pmlca); - break; - case 3: - mtpmr(PMRN_PMLCA3, pmlca); - break; - default: - panic("Bad ctr number\n"); - } -} - -void init_pmc_stop(int ctr) -{ - u32 pmlca = (PMLCA_FC | PMLCA_FCS | PMLCA_FCU | - PMLCA_FCM1 | PMLCA_FCM0); - u32 pmlcb = 0; - - switch (ctr) { - case 0: - mtpmr(PMRN_PMLCA0, pmlca); - mtpmr(PMRN_PMLCB0, pmlcb); - break; - case 1: - mtpmr(PMRN_PMLCA1, pmlca); - mtpmr(PMRN_PMLCB1, pmlcb); - break; - case 2: - mtpmr(PMRN_PMLCA2, pmlca); - mtpmr(PMRN_PMLCB2, pmlcb); - break; - case 3: - mtpmr(PMRN_PMLCA3, pmlca); - mtpmr(PMRN_PMLCB3, pmlcb); - break; - default: - panic("Bad ctr number!\n"); - } -} - -void set_pmc_event(int ctr, int event) -{ - u32 pmlca; - - pmlca = get_pmlca(ctr); - - pmlca = (pmlca & ~PMLCA_EVENT_MASK) | - ((event << PMLCA_EVENT_SHIFT) & - PMLCA_EVENT_MASK); - - set_pmlca(ctr, pmlca); -} - -void set_pmc_user_kernel(int ctr, int user, int kernel) -{ - u32 pmlca; - - pmlca = get_pmlca(ctr); - - if(user) - pmlca &= ~PMLCA_FCU; - else - pmlca |= PMLCA_FCU; - - if(kernel) - pmlca &= ~PMLCA_FCS; - else - pmlca |= PMLCA_FCS; - - set_pmlca(ctr, pmlca); -} - -void set_pmc_marked(int ctr, int mark0, int mark1) -{ - u32 pmlca = get_pmlca(ctr); - - if(mark0) - pmlca &= ~PMLCA_FCM0; - else - pmlca |= PMLCA_FCM0; - - if(mark1) - pmlca &= ~PMLCA_FCM1; - else - pmlca |= PMLCA_FCM1; - - set_pmlca(ctr, pmlca); -} - -void pmc_start_ctr(int ctr, int enable) -{ - u32 pmlca = get_pmlca(ctr); - - pmlca &= ~PMLCA_FC; - - if (enable) - pmlca |= PMLCA_CE; - else - pmlca &= ~PMLCA_CE; - - set_pmlca(ctr, pmlca); -} - -void pmc_start_ctrs(int enable) -{ - u32 pmgc0 = mfpmr(PMRN_PMGC0); - - pmgc0 &= ~PMGC0_FAC; - pmgc0 |= PMGC0_FCECE; - - if (enable) - pmgc0 |= PMGC0_PMIE; - else - pmgc0 &= ~PMGC0_PMIE; - - mtpmr(PMRN_PMGC0, pmgc0); -} - -void pmc_stop_ctrs(void) -{ - u32 pmgc0 = mfpmr(PMRN_PMGC0); - - pmgc0 |= PMGC0_FAC; - - pmgc0 &= ~(PMGC0_PMIE | PMGC0_FCECE); - - mtpmr(PMRN_PMGC0, pmgc0); -} - -void dump_pmcs(void) -{ - printk("pmgc0: %x\n", mfpmr(PMRN_PMGC0)); - printk("pmc\t\tpmlca\t\tpmlcb\n"); - printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC0), - mfpmr(PMRN_PMLCA0), mfpmr(PMRN_PMLCB0)); - printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC1), - mfpmr(PMRN_PMLCA1), mfpmr(PMRN_PMLCB1)); - printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC2), - mfpmr(PMRN_PMLCA2), mfpmr(PMRN_PMLCB2)); - printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC3), - mfpmr(PMRN_PMLCA3), mfpmr(PMRN_PMLCB3)); -} - -EXPORT_SYMBOL(init_pmc_stop); -EXPORT_SYMBOL(set_pmc_event); -EXPORT_SYMBOL(set_pmc_user_kernel); -EXPORT_SYMBOL(set_pmc_marked); -EXPORT_SYMBOL(pmc_start_ctr); -EXPORT_SYMBOL(pmc_start_ctrs); -EXPORT_SYMBOL(pmc_stop_ctrs); -EXPORT_SYMBOL(dump_pmcs); -- cgit v1.2.3-18-g5258 From e7e2d2da26384b07dfee83f63e6090e386c63d7e Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 27 Mar 2006 20:17:06 +1100 Subject: powerpc: Don't compile in arch/ppc/kernel for 32-bit ARCH=powerpc All of the things needed for 32-bit ARCH=powerpc builds have now moved to arch/powerpc/kernel, so we don't need to go down into arch/ppc/kernel any more, and we can remove the CONFIG_PPC_MERGE conditional from arch/ppc/kernel/Makefile. There were two files still referenced in the merge section of arch/ppc/kernel/Makefile: ppc-stub.o, depending on CONFIG_KGDB, and dma-mapping.o, depending on CONFIG_NOT_COHERENT_CACHE. None of the platforms currently in ARCH=powerpc have caches that aren't coherent with DMA, but when we do get one we'll move dma-mapping.c over. As for CONFIG_KGDB, none of the Kconfig files in the tree define it, so I'll let it languish for now. Signed-off-by: Paul Mackerras --- arch/powerpc/Makefile | 1 - arch/ppc/kernel/Makefile | 9 --------- 2 files changed, 10 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 829e017b8a5..9586899de68 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -129,7 +129,6 @@ core-y += arch/powerpc/kernel/ \ arch/powerpc/lib/ \ arch/powerpc/sysdev/ \ arch/powerpc/platforms/ -core-$(CONFIG_PPC32) += arch/ppc/kernel/ core-$(CONFIG_MATH_EMULATION) += arch/ppc/math-emu/ core-$(CONFIG_XMON) += arch/powerpc/xmon/ core-$(CONFIG_APUS) += arch/ppc/amiga/ diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index 4b7a05655cf..466437f4bcb 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile @@ -1,8 +1,6 @@ # # Makefile for the linux kernel. # -ifneq ($(CONFIG_PPC_MERGE),y) - extra-$(CONFIG_PPC_STD_MMU) := head.o extra-$(CONFIG_40x) := head_4xx.o extra-$(CONFIG_44x) := head_44x.o @@ -24,10 +22,3 @@ obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o ifndef CONFIG_MATH_EMULATION obj-$(CONFIG_8xx) += softemu8xx.o endif - -# These are here while we do the architecture merge - -else -obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-mapping.o -obj-$(CONFIG_KGDB) += ppc-stub.o -endif -- cgit v1.2.3-18-g5258 From 10c2df65060e1ab57b2f75e0749de0ee9b8f4810 Mon Sep 17 00:00:00 2001 From: "Hyok S. Choi" Date: Mon, 27 Mar 2006 10:21:34 +0100 Subject: [ARM] nommu: MPU support in boot/compressed/head.S This patch adds MPU support in boot/compressed/head.S. Signed-off-by: Hyok S. Choi Signed-off-by: Russell King --- arch/arm/boot/compressed/head.S | 106 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 106 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 491c7e4c9ac..b56f5e691d6 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -2,6 +2,7 @@ * linux/arch/arm/boot/compressed/head.S * * Copyright (C) 1996-2002 Russell King + * Copyright (C) 2004 Hyok S. Choi (MPU support) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -320,6 +321,62 @@ params: ldr r0, =params_phys cache_on: mov r3, #8 @ cache_on function b call_cache_fn +/* + * Initialize the highest priority protection region, PR7 + * to cover all 32bit address and cacheable and bufferable. + */ +__armv4_mpu_cache_on: + mov r0, #0x3f @ 4G, the whole + mcr p15, 0, r0, c6, c7, 0 @ PR7 Area Setting + mcr p15, 0, r0, c6, c7, 1 + + mov r0, #0x80 @ PR7 + mcr p15, 0, r0, c2, c0, 0 @ D-cache on + mcr p15, 0, r0, c2, c0, 1 @ I-cache on + mcr p15, 0, r0, c3, c0, 0 @ write-buffer on + + mov r0, #0xc000 + mcr p15, 0, r0, c5, c0, 1 @ I-access permission + mcr p15, 0, r0, c5, c0, 0 @ D-access permission + + mov r0, #0 + mcr p15, 0, r0, c7, c10, 4 @ drain write buffer + mcr p15, 0, r0, c7, c5, 0 @ flush(inval) I-Cache + mcr p15, 0, r0, c7, c6, 0 @ flush(inval) D-Cache + mrc p15, 0, r0, c1, c0, 0 @ read control reg + @ ...I .... ..D. WC.M + orr r0, r0, #0x002d @ .... .... ..1. 11.1 + orr r0, r0, #0x1000 @ ...1 .... .... .... + + mcr p15, 0, r0, c1, c0, 0 @ write control reg + + mov r0, #0 + mcr p15, 0, r0, c7, c5, 0 @ flush(inval) I-Cache + mcr p15, 0, r0, c7, c6, 0 @ flush(inval) D-Cache + mov pc, lr + +__armv3_mpu_cache_on: + mov r0, #0x3f @ 4G, the whole + mcr p15, 0, r0, c6, c7, 0 @ PR7 Area Setting + + mov r0, #0x80 @ PR7 + mcr p15, 0, r0, c2, c0, 0 @ cache on + mcr p15, 0, r0, c3, c0, 0 @ write-buffer on + + mov r0, #0xc000 + mcr p15, 0, r0, c5, c0, 0 @ access permission + + mov r0, #0 + mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3 + mrc p15, 0, r0, c1, c0, 0 @ read control reg + @ .... .... .... WC.M + orr r0, r0, #0x000d @ .... .... .... 11.1 + mov r0, #0 + mcr p15, 0, r0, c1, c0, 0 @ write control reg + + mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3 + mov pc, lr + __setup_mmu: sub r3, r4, #16384 @ Page directory size bic r3, r3, #0xff @ Align the pointer bic r3, r3, #0x3f00 @@ -496,6 +553,18 @@ proc_types: b __armv4_mmu_cache_off mov pc, lr + .word 0x41007400 @ ARM74x + .word 0xff00ff00 + b __armv3_mpu_cache_on + b __armv3_mpu_cache_off + b __armv3_mpu_cache_flush + + .word 0x41009400 @ ARM94x + .word 0xff00ff00 + b __armv4_mpu_cache_on + b __armv4_mpu_cache_off + b __armv4_mpu_cache_flush + .word 0x00007000 @ ARM7 IDs .word 0x0000f000 mov pc, lr @@ -562,6 +631,24 @@ proc_types: cache_off: mov r3, #12 @ cache_off function b call_cache_fn +__armv4_mpu_cache_off: + mrc p15, 0, r0, c1, c0 + bic r0, r0, #0x000d + mcr p15, 0, r0, c1, c0 @ turn MPU and cache off + mov r0, #0 + mcr p15, 0, r0, c7, c10, 4 @ drain write buffer + mcr p15, 0, r0, c7, c6, 0 @ flush D-Cache + mcr p15, 0, r0, c7, c5, 0 @ flush I-Cache + mov pc, lr + +__armv3_mpu_cache_off: + mrc p15, 0, r0, c1, c0 + bic r0, r0, #0x000d + mcr p15, 0, r0, c1, c0, 0 @ turn MPU and cache off + mov r0, #0 + mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3 + mov pc, lr + __armv4_mmu_cache_off: mrc p15, 0, r0, c1, c0 bic r0, r0, #0x000d @@ -601,6 +688,24 @@ cache_clean_flush: mov r3, #16 b call_cache_fn +__armv4_mpu_cache_flush: + mov r2, #1 + mov r3, #0 + mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache + mov r1, #7 << 5 @ 8 segments +1: orr r3, r1, #63 << 26 @ 64 entries +2: mcr p15, 0, r3, c7, c14, 2 @ clean & invalidate D index + subs r3, r3, #1 << 26 + bcs 2b @ entries 63 to 0 + subs r1, r1, #1 << 5 + bcs 1b @ segments 7 to 0 + + teq r2, #0 + mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache + mcr p15, 0, ip, c7, c10, 4 @ drain WB + mov pc, lr + + __armv6_mmu_cache_flush: mov r1, #0 mcr p15, 0, r1, c7, c14, 0 @ clean+invalidate D @@ -638,6 +743,7 @@ no_cache_id: mov pc, lr __armv3_mmu_cache_flush: +__armv3_mpu_cache_flush: mov r1, #0 mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3 mov pc, lr -- cgit v1.2.3-18-g5258 From d0cc0dfa2dcf18854144b16a74502bd25c4eaedf Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 27 Mar 2006 20:31:44 +1100 Subject: ppc: Remove duplicate exports of __down, __up etc. __down, __down_interruptible and __up are defined and exported in arch/powerpc/kernel/semaphore.c, and used from there for ARCH=ppc, so there is no need to export them in arch/ppc/kernel/ppc_ksyms.c. Signed-off-by: Paul Mackerras --- arch/ppc/kernel/ppc_ksyms.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c index 82adb460134..683e028000e 100644 --- a/arch/ppc/kernel/ppc_ksyms.c +++ b/arch/ppc/kernel/ppc_ksyms.c @@ -18,7 +18,6 @@ #include #include -#include #include #include #include @@ -262,9 +261,6 @@ EXPORT_SYMBOL(console_drivers); EXPORT_SYMBOL(xmon); EXPORT_SYMBOL(xmon_printf); #endif -EXPORT_SYMBOL(__up); -EXPORT_SYMBOL(__down); -EXPORT_SYMBOL(__down_interruptible); #if defined(CONFIG_KGDB) || defined(CONFIG_XMON) extern void (*debugger)(struct pt_regs *regs); -- cgit v1.2.3-18-g5258 From 9618edab82fda8dbce5ea3abcdac9ded07abb2d4 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 27 Mar 2006 21:48:57 +1100 Subject: powerpc: Fix event-scan code for 32-bit CHRP On CHRP machines we are supposed to call into firmware (RTAS) periodically, to give it a chance to check for errors and other events. Under ppc we had some special code in timer_interrupt to do this, but that didn't get transferred over to arch/powerpc. Instead, we use an array of timer_list structs, one per CPU, and use add_timer_on to make sure each one gets called on the appropriate CPU. With this we can remove the heartbeat_* elements of the ppc_md struct. Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/chrp/chrp.h | 2 +- arch/powerpc/platforms/chrp/setup.c | 64 ++++++++++++++++++++++++++----------- 2 files changed, 46 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/chrp/chrp.h b/arch/powerpc/platforms/chrp/chrp.h index 814f54742e0..63f0aee4c15 100644 --- a/arch/powerpc/platforms/chrp/chrp.h +++ b/arch/powerpc/platforms/chrp/chrp.h @@ -8,4 +8,4 @@ extern int chrp_set_rtc_time(struct rtc_time *); extern long chrp_time_init(void); extern void chrp_find_bridges(void); -extern void chrp_event_scan(void); +extern void chrp_event_scan(unsigned long); diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index 8bf4307e323..9c718bb2305 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #include @@ -61,6 +62,10 @@ EXPORT_SYMBOL(_chrp_type); struct mpic *chrp_mpic; +/* Used for doing CHRP event-scans */ +DEFINE_PER_CPU(struct timer_list, heartbeat_timer); +unsigned long event_scan_interval; + /* * XXX this should be in xmon.h, but putting it there means xmon.h * has to include (to get irqreturn_t), which @@ -229,8 +234,6 @@ void __init chrp_setup_arch(void) { struct device_node *root = find_path_device ("/"); char *machine = NULL; - struct device_node *device; - unsigned int *p = NULL; /* init to some ~sane value until calibrate_delay() runs */ loops_per_jiffy = 50000000/HZ; @@ -287,21 +290,6 @@ void __init chrp_setup_arch(void) */ sio_init(); - /* Get the event scan rate for the rtas so we know how - * often it expects a heartbeat. -- Cort - */ - device = find_devices("rtas"); - if (device) - p = (unsigned int *) get_property - (device, "rtas-event-scan-rate", NULL); - if (p && *p) { - ppc_md.heartbeat = chrp_event_scan; - ppc_md.heartbeat_reset = HZ / (*p * 30) - 1; - ppc_md.heartbeat_count = 1; - printk("RTAS Event Scan Rate: %u (%lu jiffies)\n", - *p, ppc_md.heartbeat_reset); - } - pci_create_OF_bus_map(); /* @@ -312,7 +300,7 @@ void __init chrp_setup_arch(void) } void -chrp_event_scan(void) +chrp_event_scan(unsigned long unused) { unsigned char log[1024]; int ret = 0; @@ -320,7 +308,8 @@ chrp_event_scan(void) /* XXX: we should loop until the hardware says no more error logs -- Cort */ rtas_call(rtas_token("event-scan"), 4, 1, &ret, 0xffffffff, 0, __pa(log), 1024); - ppc_md.heartbeat_count = ppc_md.heartbeat_reset; + mod_timer(&__get_cpu_var(heartbeat_timer), + jiffies + event_scan_interval); } /* @@ -465,6 +454,9 @@ void __init chrp_init_IRQ(void) void __init chrp_init2(void) { + struct device_node *device; + unsigned int *p = NULL; + #ifdef CONFIG_NVRAM chrp_nvram_init(); #endif @@ -476,6 +468,40 @@ chrp_init2(void) request_region(0x80,0x10,"dma page reg"); request_region(0xc0,0x20,"dma2"); + /* Get the event scan rate for the rtas so we know how + * often it expects a heartbeat. -- Cort + */ + device = find_devices("rtas"); + if (device) + p = (unsigned int *) get_property + (device, "rtas-event-scan-rate", NULL); + if (p && *p) { + /* + * Arrange to call chrp_event_scan at least *p times + * per minute. We use 59 rather than 60 here so that + * the rate will be slightly higher than the minimum. + * This all assumes we don't do hotplug CPU on any + * machine that needs the event scans done. + */ + unsigned long interval, offset; + int cpu, ncpus; + struct timer_list *timer; + + interval = HZ * 59 / *p; + offset = HZ; + ncpus = num_online_cpus(); + event_scan_interval = ncpus * interval; + for (cpu = 0; cpu < ncpus; ++cpu) { + timer = &per_cpu(heartbeat_timer, cpu); + setup_timer(timer, chrp_event_scan, 0); + timer->expires = jiffies + offset; + add_timer_on(timer, cpu); + offset += interval; + } + printk("RTAS Event Scan Rate: %u (%lu jiffies)\n", + *p, interval); + } + if (ppc_md.progress) ppc_md.progress(" Have fun! ", 0x7777); } -- cgit v1.2.3-18-g5258 From 75d90832d58aa5855972cfc2bdaa94970ccd4aca Mon Sep 17 00:00:00 2001 From: "Hyok S. Choi" Date: Mon, 27 Mar 2006 14:58:25 +0100 Subject: [ARM] nommu: start-up code This patch adds nommu version start-up code head-nommu.S. The common part of the start-up codes is moved to head-common.S. Signed-off-by: Hyok S. Choi Signed-off-by: Russell King --- arch/arm/Makefile | 2 +- arch/arm/kernel/head-common.S | 217 ++++++++++++++++++++++++++++++++++++++++++ arch/arm/kernel/head-nommu.S | 83 ++++++++++++++++ arch/arm/kernel/head.S | 207 +--------------------------------------- 4 files changed, 302 insertions(+), 207 deletions(-) create mode 100644 arch/arm/kernel/head-common.S create mode 100644 arch/arm/kernel/head-nommu.S (limited to 'arch') diff --git a/arch/arm/Makefile b/arch/arm/Makefile index fbfc14a56b9..e3770ed8782 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -69,7 +69,7 @@ AFLAGS +=$(CFLAGS_ABI) $(arch-y) $(tune-y) -msoft-float CHECKFLAGS += -D__arm__ #Default value -head-y := arch/arm/kernel/head.o arch/arm/kernel/init_task.o +head-y := arch/arm/kernel/head$(MMUEXT).o arch/arm/kernel/init_task.o textofs-y := 0x00008000 machine-$(CONFIG_ARCH_RPC) := rpc diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S new file mode 100644 index 00000000000..a52da0ddb43 --- /dev/null +++ b/arch/arm/kernel/head-common.S @@ -0,0 +1,217 @@ +/* + * linux/arch/arm/kernel/head-common.S + * + * Copyright (C) 1994-2002 Russell King + * Copyright (c) 2003 ARM Limited + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + + .type __switch_data, %object +__switch_data: + .long __mmap_switched + .long __data_loc @ r4 + .long __data_start @ r5 + .long __bss_start @ r6 + .long _end @ r7 + .long processor_id @ r4 + .long __machine_arch_type @ r5 + .long cr_alignment @ r6 + .long init_thread_union + THREAD_START_SP @ sp + +/* + * The following fragment of code is executed with the MMU on in MMU mode, + * and uses absolute addresses; this is not position independent. + * + * r0 = cp#15 control register + * r1 = machine ID + * r9 = processor ID + */ + .type __mmap_switched, %function +__mmap_switched: + adr r3, __switch_data + 4 + + ldmia r3!, {r4, r5, r6, r7} + cmp r4, r5 @ Copy data segment if needed +1: cmpne r5, r6 + ldrne fp, [r4], #4 + strne fp, [r5], #4 + bne 1b + + mov fp, #0 @ Clear BSS (and zero fp) +1: cmp r6, r7 + strcc fp, [r6],#4 + bcc 1b + + ldmia r3, {r4, r5, r6, sp} + str r9, [r4] @ Save processor ID + str r1, [r5] @ Save machine type + bic r4, r0, #CR_A @ Clear 'A' bit + stmia r6, {r0, r4} @ Save control register values + b start_kernel + +/* + * Exception handling. Something went wrong and we can't proceed. We + * ought to tell the user, but since we don't have any guarantee that + * we're even running on the right architecture, we do virtually nothing. + * + * If CONFIG_DEBUG_LL is set we try to print out something about the error + * and hope for the best (useful if bootloader fails to pass a proper + * machine ID for example). + */ + + .type __error_p, %function +__error_p: +#ifdef CONFIG_DEBUG_LL + adr r0, str_p1 + bl printascii + b __error +str_p1: .asciz "\nError: unrecognized/unsupported processor variant.\n" + .align +#endif + + .type __error_a, %function +__error_a: +#ifdef CONFIG_DEBUG_LL + mov r4, r1 @ preserve machine ID + adr r0, str_a1 + bl printascii + mov r0, r4 + bl printhex8 + adr r0, str_a2 + bl printascii + adr r3, 3f + ldmia r3, {r4, r5, r6} @ get machine desc list + sub r4, r3, r4 @ get offset between virt&phys + add r5, r5, r4 @ convert virt addresses to + add r6, r6, r4 @ physical address space +1: ldr r0, [r5, #MACHINFO_TYPE] @ get machine type + bl printhex8 + mov r0, #'\t' + bl printch + ldr r0, [r5, #MACHINFO_NAME] @ get machine name + add r0, r0, r4 + bl printascii + mov r0, #'\n' + bl printch + add r5, r5, #SIZEOF_MACHINE_DESC @ next machine_desc + cmp r5, r6 + blo 1b + adr r0, str_a3 + bl printascii + b __error +str_a1: .asciz "\nError: unrecognized/unsupported machine ID (r1 = 0x" +str_a2: .asciz ").\n\nAvailable machine support:\n\nID (hex)\tNAME\n" +str_a3: .asciz "\nPlease check your kernel config and/or bootloader.\n" + .align +#endif + + .type __error, %function +__error: +#ifdef CONFIG_ARCH_RPC +/* + * Turn the screen red on a error - RiscPC only. + */ + mov r0, #0x02000000 + mov r3, #0x11 + orr r3, r3, r3, lsl #8 + orr r3, r3, r3, lsl #16 + str r3, [r0], #4 + str r3, [r0], #4 + str r3, [r0], #4 + str r3, [r0], #4 +#endif +1: mov r0, r0 + b 1b + + +/* + * Read processor ID register (CP#15, CR0), and look up in the linker-built + * supported processor list. Note that we can't use the absolute addresses + * for the __proc_info lists since we aren't running with the MMU on + * (and therefore, we are not in the correct address space). We have to + * calculate the offset. + * + * r9 = cpuid + * Returns: + * r3, r4, r6 corrupted + * r5 = proc_info pointer in physical address space + * r9 = cpuid (preserved) + */ + .type __lookup_processor_type, %function +__lookup_processor_type: + adr r3, 3f + ldmda r3, {r5 - r7} + sub r3, r3, r7 @ get offset between virt&phys + add r5, r5, r3 @ convert virt addresses to + add r6, r6, r3 @ physical address space +1: ldmia r5, {r3, r4} @ value, mask + and r4, r4, r9 @ mask wanted bits + teq r3, r4 + beq 2f + add r5, r5, #PROC_INFO_SZ @ sizeof(proc_info_list) + cmp r5, r6 + blo 1b + mov r5, #0 @ unknown processor +2: mov pc, lr + +/* + * This provides a C-API version of the above function. + */ +ENTRY(lookup_processor_type) + stmfd sp!, {r4 - r7, r9, lr} + mov r9, r0 + bl __lookup_processor_type + mov r0, r5 + ldmfd sp!, {r4 - r7, r9, pc} + +/* + * Look in include/asm-arm/procinfo.h and arch/arm/kernel/arch.[ch] for + * more information about the __proc_info and __arch_info structures. + */ + .long __proc_info_begin + .long __proc_info_end +3: .long . + .long __arch_info_begin + .long __arch_info_end + +/* + * Lookup machine architecture in the linker-build list of architectures. + * Note that we can't use the absolute addresses for the __arch_info + * lists since we aren't running with the MMU on (and therefore, we are + * not in the correct address space). We have to calculate the offset. + * + * r1 = machine architecture number + * Returns: + * r3, r4, r6 corrupted + * r5 = mach_info pointer in physical address space + */ + .type __lookup_machine_type, %function +__lookup_machine_type: + adr r3, 3b + ldmia r3, {r4, r5, r6} + sub r3, r3, r4 @ get offset between virt&phys + add r5, r5, r3 @ convert virt addresses to + add r6, r6, r3 @ physical address space +1: ldr r3, [r5, #MACHINFO_TYPE] @ get machine type + teq r3, r1 @ matches loader number? + beq 2f @ found + add r5, r5, #SIZEOF_MACHINE_DESC @ next machine_desc + cmp r5, r6 + blo 1b + mov r5, #0 @ unknown machine +2: mov pc, lr + +/* + * This provides a C-API version of the above function. + */ +ENTRY(lookup_machine_type) + stmfd sp!, {r4 - r6, lr} + mov r1, r0 + bl __lookup_machine_type + mov r0, r5 + ldmfd sp!, {r4 - r6, pc} diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S new file mode 100644 index 00000000000..b093ab8738b --- /dev/null +++ b/arch/arm/kernel/head-nommu.S @@ -0,0 +1,83 @@ +/* + * linux/arch/arm/kernel/head-nommu.S + * + * Copyright (C) 1994-2002 Russell King + * Copyright (C) 2003-2006 Hyok S. Choi + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Common kernel startup code (non-paged MM) + * for 32-bit CPUs which has a process ID register(CP15). + * + */ +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#define PROCINFO_INITFUNC 12 + +/* + * Kernel startup entry point. + * --------------------------- + * + * This is normally called from the decompressor code. The requirements + * are: MMU = off, D-cache = off, I-cache = dont care, r0 = 0, + * r1 = machine nr. + * + * See linux/arch/arm/tools/mach-types for the complete list of machine + * numbers for r1. + * + */ + __INIT + .type stext, %function +ENTRY(stext) + msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | MODE_SVC @ ensure svc mode + @ and irqs disabled + mrc p15, 0, r9, c0, c0 @ get processor id + bl __lookup_processor_type @ r5=procinfo r9=cpuid + movs r10, r5 @ invalid processor (r5=0)? + beq __error_p @ yes, error 'p' + bl __lookup_machine_type @ r5=machinfo + movs r8, r5 @ invalid machine (r5=0)? + beq __error_a @ yes, error 'a' + + ldr r13, __switch_data @ address to jump to after + @ the initialization is done + adr lr, __after_proc_init @ return (PIC) address + add pc, r10, #PROCINFO_INITFUNC + +/* + * Set the Control Register and Read the process ID. + */ + .type __after_proc_init, %function +__after_proc_init: + mrc p15, 0, r0, c1, c0, 0 @ read control reg +#ifdef CONFIG_ALIGNMENT_TRAP + orr r0, r0, #CR_A +#else + bic r0, r0, #CR_A +#endif +#ifdef CONFIG_CPU_DCACHE_DISABLE + bic r0, r0, #CR_C +#endif +#ifdef CONFIG_CPU_BPREDICT_DISABLE + bic r0, r0, #CR_Z +#endif +#ifdef CONFIG_CPU_ICACHE_DISABLE + bic r0, r0, #CR_I +#endif + mcr p15, 0, r0, c1, c0, 0 @ write control reg + + mov pc, r13 @ clear the BSS and jump + @ to start_kernel + +#include "head-common.S" diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 571d6d58491..d848f3a3892 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -103,49 +103,6 @@ ENTRY(stext) adr lr, __enable_mmu @ return (PIC) address add pc, r10, #PROCINFO_INITFUNC - .type __switch_data, %object -__switch_data: - .long __mmap_switched - .long __data_loc @ r4 - .long __data_start @ r5 - .long __bss_start @ r6 - .long _end @ r7 - .long processor_id @ r4 - .long __machine_arch_type @ r5 - .long cr_alignment @ r6 - .long init_thread_union + THREAD_START_SP @ sp - -/* - * The following fragment of code is executed with the MMU on, and uses - * absolute addresses; this is not position independent. - * - * r0 = cp#15 control register - * r1 = machine ID - * r9 = processor ID - */ - .type __mmap_switched, %function -__mmap_switched: - adr r3, __switch_data + 4 - - ldmia r3!, {r4, r5, r6, r7} - cmp r4, r5 @ Copy data segment if needed -1: cmpne r5, r6 - ldrne fp, [r4], #4 - strne fp, [r5], #4 - bne 1b - - mov fp, #0 @ Clear BSS (and zero fp) -1: cmp r6, r7 - strcc fp, [r6],#4 - bcc 1b - - ldmia r3, {r4, r5, r6, sp} - str r9, [r4] @ Save processor ID - str r1, [r5] @ Save machine type - bic r4, r0, #CR_A @ Clear 'A' bit - stmia r6, {r0, r4} @ Save control register values - b start_kernel - #if defined(CONFIG_SMP) .type secondary_startup, #function ENTRY(secondary_startup) @@ -368,166 +325,4 @@ __create_page_tables: mov pc, lr .ltorg - - -/* - * Exception handling. Something went wrong and we can't proceed. We - * ought to tell the user, but since we don't have any guarantee that - * we're even running on the right architecture, we do virtually nothing. - * - * If CONFIG_DEBUG_LL is set we try to print out something about the error - * and hope for the best (useful if bootloader fails to pass a proper - * machine ID for example). - */ - - .type __error_p, %function -__error_p: -#ifdef CONFIG_DEBUG_LL - adr r0, str_p1 - bl printascii - b __error -str_p1: .asciz "\nError: unrecognized/unsupported processor variant.\n" - .align -#endif - - .type __error_a, %function -__error_a: -#ifdef CONFIG_DEBUG_LL - mov r4, r1 @ preserve machine ID - adr r0, str_a1 - bl printascii - mov r0, r4 - bl printhex8 - adr r0, str_a2 - bl printascii - adr r3, 3f - ldmia r3, {r4, r5, r6} @ get machine desc list - sub r4, r3, r4 @ get offset between virt&phys - add r5, r5, r4 @ convert virt addresses to - add r6, r6, r4 @ physical address space -1: ldr r0, [r5, #MACHINFO_TYPE] @ get machine type - bl printhex8 - mov r0, #'\t' - bl printch - ldr r0, [r5, #MACHINFO_NAME] @ get machine name - add r0, r0, r4 - bl printascii - mov r0, #'\n' - bl printch - add r5, r5, #SIZEOF_MACHINE_DESC @ next machine_desc - cmp r5, r6 - blo 1b - adr r0, str_a3 - bl printascii - b __error -str_a1: .asciz "\nError: unrecognized/unsupported machine ID (r1 = 0x" -str_a2: .asciz ").\n\nAvailable machine support:\n\nID (hex)\tNAME\n" -str_a3: .asciz "\nPlease check your kernel config and/or bootloader.\n" - .align -#endif - - .type __error, %function -__error: -#ifdef CONFIG_ARCH_RPC -/* - * Turn the screen red on a error - RiscPC only. - */ - mov r0, #0x02000000 - mov r3, #0x11 - orr r3, r3, r3, lsl #8 - orr r3, r3, r3, lsl #16 - str r3, [r0], #4 - str r3, [r0], #4 - str r3, [r0], #4 - str r3, [r0], #4 -#endif -1: mov r0, r0 - b 1b - - -/* - * Read processor ID register (CP#15, CR0), and look up in the linker-built - * supported processor list. Note that we can't use the absolute addresses - * for the __proc_info lists since we aren't running with the MMU on - * (and therefore, we are not in the correct address space). We have to - * calculate the offset. - * - * r9 = cpuid - * Returns: - * r3, r4, r6 corrupted - * r5 = proc_info pointer in physical address space - * r9 = cpuid (preserved) - */ - .type __lookup_processor_type, %function -__lookup_processor_type: - adr r3, 3f - ldmda r3, {r5 - r7} - sub r3, r3, r7 @ get offset between virt&phys - add r5, r5, r3 @ convert virt addresses to - add r6, r6, r3 @ physical address space -1: ldmia r5, {r3, r4} @ value, mask - and r4, r4, r9 @ mask wanted bits - teq r3, r4 - beq 2f - add r5, r5, #PROC_INFO_SZ @ sizeof(proc_info_list) - cmp r5, r6 - blo 1b - mov r5, #0 @ unknown processor -2: mov pc, lr - -/* - * This provides a C-API version of the above function. - */ -ENTRY(lookup_processor_type) - stmfd sp!, {r4 - r7, r9, lr} - mov r9, r0 - bl __lookup_processor_type - mov r0, r5 - ldmfd sp!, {r4 - r7, r9, pc} - -/* - * Look in include/asm-arm/procinfo.h and arch/arm/kernel/arch.[ch] for - * more information about the __proc_info and __arch_info structures. - */ - .long __proc_info_begin - .long __proc_info_end -3: .long . - .long __arch_info_begin - .long __arch_info_end - -/* - * Lookup machine architecture in the linker-build list of architectures. - * Note that we can't use the absolute addresses for the __arch_info - * lists since we aren't running with the MMU on (and therefore, we are - * not in the correct address space). We have to calculate the offset. - * - * r1 = machine architecture number - * Returns: - * r3, r4, r6 corrupted - * r5 = mach_info pointer in physical address space - */ - .type __lookup_machine_type, %function -__lookup_machine_type: - adr r3, 3b - ldmia r3, {r4, r5, r6} - sub r3, r3, r4 @ get offset between virt&phys - add r5, r5, r3 @ convert virt addresses to - add r6, r6, r3 @ physical address space -1: ldr r3, [r5, #MACHINFO_TYPE] @ get machine type - teq r3, r1 @ matches loader number? - beq 2f @ found - add r5, r5, #SIZEOF_MACHINE_DESC @ next machine_desc - cmp r5, r6 - blo 1b - mov r5, #0 @ unknown machine -2: mov pc, lr - -/* - * This provides a C-API version of the above function. - */ -ENTRY(lookup_machine_type) - stmfd sp!, {r4 - r6, lr} - mov r1, r0 - bl __lookup_machine_type - mov r0, r5 - ldmfd sp!, {r4 - r6, pc} +#include "head-common.S" -- cgit v1.2.3-18-g5258 From f8c07de6beac55c3273cbd679bfa67555ef14ef5 Mon Sep 17 00:00:00 2001 From: "Hyok S. Choi" Date: Mon, 27 Mar 2006 15:14:19 +0100 Subject: [ARM] nommu: add nommu specific Kconfig and MMUEXT variable in Makefile This patch adds Kconfig-nommu for noMMU specific configurations and MMUEXT variable into Makefile. Signed-off-by: Hyok S. Choi Signed-off-by: Russell King --- arch/arm/Kconfig-nommu | 27 +++++++++++++++++++++++++++ arch/arm/Makefile | 7 ++++++- 2 files changed, 33 insertions(+), 1 deletion(-) create mode 100644 arch/arm/Kconfig-nommu (limited to 'arch') diff --git a/arch/arm/Kconfig-nommu b/arch/arm/Kconfig-nommu new file mode 100644 index 00000000000..8ce56e5bd78 --- /dev/null +++ b/arch/arm/Kconfig-nommu @@ -0,0 +1,27 @@ +# +# Kconfig for uClinux(non-paged MM) depend configurations +# Hyok S. Choi +# + +config SET_MEM_PARAM + bool "Set flash/sdram size and base addr" + help + Say Y to manually set the base addresses and sizes. + otherwise, the default values are assigned. + +config DRAM_BASE + hex '(S)DRAM Base Address' if SET_MEM_PARAM + default 0x00800000 + +config DRAM_SIZE + hex '(S)DRAM SIZE' if SET_MEM_PARAM + default 0x00800000 + +config FLASH_MEM_BASE + hex 'FLASH Base Address' if SET_MEM_PARAM + default 0x00400000 + +config FLASH_SIZE + hex 'FLASH Size' if SET_MEM_PARAM + default 0x00400000 + diff --git a/arch/arm/Makefile b/arch/arm/Makefile index e3770ed8782..73df2297a5f 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -17,6 +17,11 @@ GZFLAGS :=-9 # Select a platform tht is kept up-to-date KBUILD_DEFCONFIG := versatile_defconfig +# defines filename extension depending memory manement type. +ifeq ($(CONFIG_MMU),) +MMUEXT := -nommu +endif + ifeq ($(CONFIG_FRAME_POINTER),y) CFLAGS +=-fno-omit-frame-pointer -mapcs -mno-sched-prolog endif @@ -127,7 +132,7 @@ else MACHINE := endif -export TEXT_OFFSET GZFLAGS +export TEXT_OFFSET GZFLAGS MMUEXT # Do we have FASTFPE? FASTFPE :=arch/arm/fastfpe -- cgit v1.2.3-18-g5258 From c760fc1997e8156ebc4134c42c18f68137c689f9 Mon Sep 17 00:00:00 2001 From: "Hyok S. Choi" Date: Mon, 27 Mar 2006 15:18:50 +0100 Subject: [ARM] nommu: fixups for the exception vectors The high page vector (0xFFFF0000) does not supported in nommu mode. This patch allows the vectors to be 0x00000000 or the begining of DRAM in nommu mode. Signed-off-by: Hyok S. Choi Signed-off-by: Russell King --- arch/arm/Kconfig | 8 ++++++++ arch/arm/Kconfig-nommu | 17 +++++++++++++++++ arch/arm/kernel/signal.h | 2 +- arch/arm/kernel/traps.c | 9 +++++---- 4 files changed, 31 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 32ba00bd0a2..b674614d090 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -72,6 +72,14 @@ config FIQ config ARCH_MTD_XIP bool +config VECTORS_BASE + hex + default 0xffff0000 if MMU + default DRAM_BASE if REMAP_VECTORS_TO_RAM + default 0x00000000 + help + The base address of exception vectors. + source "init/Kconfig" menu "System Type" diff --git a/arch/arm/Kconfig-nommu b/arch/arm/Kconfig-nommu index 8ce56e5bd78..e1574be2ded 100644 --- a/arch/arm/Kconfig-nommu +++ b/arch/arm/Kconfig-nommu @@ -25,3 +25,20 @@ config FLASH_SIZE hex 'FLASH Size' if SET_MEM_PARAM default 0x00400000 +config REMAP_VECTORS_TO_RAM + bool 'Install vectors to the begining of RAM' if DRAM_BASE + depends on DRAM_BASE + help + The kernel needs to change the hardware exception vectors. + In nommu mode, the hardware exception vectors are normally + placed at address 0x00000000. However, this region may be + occupied by read-only memory depending on H/W design. + + If the region contains read-write memory, say 'n' here. + + If your CPU provides a remap facility which allows the exception + vectors to be mapped to writable memory, say 'n' here. + + Otherwise, say 'y' here. In this case, the kernel will require + external support to redirect the hardware exception vectors to + the writable versions located at DRAM_BASE. diff --git a/arch/arm/kernel/signal.h b/arch/arm/kernel/signal.h index 9991049c522..27beece1550 100644 --- a/arch/arm/kernel/signal.h +++ b/arch/arm/kernel/signal.h @@ -7,6 +7,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#define KERN_SIGRETURN_CODE 0xffff0500 +#define KERN_SIGRETURN_CODE (CONFIG_VECTORS_BASE + 0x00000500) extern const unsigned long sigreturn_codes[7]; diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 03924bcc612..32b0570329e 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -688,6 +688,7 @@ EXPORT_SYMBOL(abort); void __init trap_init(void) { + unsigned long vectors = CONFIG_VECTORS_BASE; extern char __stubs_start[], __stubs_end[]; extern char __vectors_start[], __vectors_end[]; extern char __kuser_helper_start[], __kuser_helper_end[]; @@ -698,9 +699,9 @@ void __init trap_init(void) * into the vector page, mapped at 0xffff0000, and ensure these * are visible to the instruction stream. */ - memcpy((void *)0xffff0000, __vectors_start, __vectors_end - __vectors_start); - memcpy((void *)0xffff0200, __stubs_start, __stubs_end - __stubs_start); - memcpy((void *)0xffff1000 - kuser_sz, __kuser_helper_start, kuser_sz); + memcpy((void *)vectors, __vectors_start, __vectors_end - __vectors_start); + memcpy((void *)vectors + 0x200, __stubs_start, __stubs_end - __stubs_start); + memcpy((void *)vectors + 0x1000 - kuser_sz, __kuser_helper_start, kuser_sz); /* * Copy signal return handlers into the vector page, and @@ -709,6 +710,6 @@ void __init trap_init(void) memcpy((void *)KERN_SIGRETURN_CODE, sigreturn_codes, sizeof(sigreturn_codes)); - flush_icache_range(0xffff0000, 0xffff0000 + PAGE_SIZE); + flush_icache_range(vectors, vectors + PAGE_SIZE); modify_domain(DOMAIN_USER, DOMAIN_CLIENT); } -- cgit v1.2.3-18-g5258 From c8c4b939e8dff82ee2bc22ed506ae29ecffca4c2 Mon Sep 17 00:00:00 2001 From: Erik Mouw Date: Mon, 27 Mar 2006 15:32:30 +0100 Subject: [ARM] 3416/1: Update LART site URL Patch from Erik Mouw The LART website moved to http://www.lartmaker.nl/. This patch updates the URL in ARM specific files. Signed-off-by: Erik Mouw Acked-by: Jan-Derk Bakker Signed-off-by: Russell King --- arch/arm/mach-sa1100/Kconfig | 2 +- arch/arm/mach-sa1100/cpu-sa1100.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig index 6923316b3d0..cd67ab1b217 100644 --- a/arch/arm/mach-sa1100/Kconfig +++ b/arch/arm/mach-sa1100/Kconfig @@ -111,7 +111,7 @@ config SA1100_LART bool "LART" help Say Y here if you are using the Linux Advanced Radio Terminal - (also known as the LART). See for + (also known as the LART). See for information on the LART. config SA1100_PLEB diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c index 6435b2e48ff..d68630b74d7 100644 --- a/arch/arm/mach-sa1100/cpu-sa1100.c +++ b/arch/arm/mach-sa1100/cpu-sa1100.c @@ -11,7 +11,7 @@ * linux-2.4.5-rmk1 * * This software has been developed while working on the LART - * computing board (http://www.lart.tudelft.nl/), which is + * computing board (http://www.lartmaker.nl/), which is * sponsored by the Mobile Multi-media Communications * (http://www.mmc.tudelft.nl/) and Ubiquitous Communications * (http://www.ubicom.tudelft.nl/) projects. -- cgit v1.2.3-18-g5258 From 4682adcfb06448827fbdfd8b6c636796de569b7d Mon Sep 17 00:00:00 2001 From: "Hyok S. Choi" Date: Mon, 27 Mar 2006 15:46:06 +0100 Subject: [ARM] nommu: trivial patch for arch/arm/lib/Makefile ifeq ($CONFIG_PREEMPT,y) -> ifeq ($(CONFIG_PREEMPT),y) Signed-off-by: Hyok S. Choi Signed-off-by: Russell King --- arch/arm/lib/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 391f3ab3ff3..7b726b627ea 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -18,7 +18,7 @@ lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \ # the code in uaccess.S is not preemption safe and # probably faster on ARMv3 only -ifeq ($CONFIG_PREEMPT,y) +ifeq ($(CONFIG_PREEMPT),y) lib-y += copy_from_user.o copy_to_user.o else ifneq ($(CONFIG_CPU_32v3),y) -- cgit v1.2.3-18-g5258 From 3747b36eeab93d8969e86987bbc1d44971229b26 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 27 Mar 2006 16:59:07 +0100 Subject: [ARM] proc-v6: mark page table walks outer-cacheable, shared. Enable NX. Mark page table walks with outer-cacheable attribute, and enable no-execute in page tables. Signed-off-by: Russell King --- arch/arm/mm/proc-v6.S | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 9a7e7c096aa..ee6f1529873 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -21,6 +21,14 @@ #define D_CACHE_LINE_SIZE 32 +#define TTB_C (1 << 0) +#define TTB_S (1 << 1) +#define TTB_IMP (1 << 2) +#define TTB_RGN_NC (0 << 3) +#define TTB_RGN_WBWA (1 << 3) +#define TTB_RGN_WT (2 << 3) +#define TTB_RGN_WB (3 << 3) + .macro cpsie, flags .ifc \flags, f .long 0xf1080040 @@ -115,7 +123,7 @@ ENTRY(cpu_v6_switch_mm) mov r2, #0 ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id #ifdef CONFIG_SMP - orr r0, r0, #2 @ set shared pgtable + orr r0, r0, #TTB_RGN_WBWA|TTB_S @ mark PTWs shared, outer cacheable #endif mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB mcr p15, 0, r2, c7, c10, 4 @ drain write buffer @@ -161,8 +169,8 @@ ENTRY(cpu_v6_set_pte) tst r1, #L_PTE_YOUNG biceq r2, r2, #PTE_EXT_APX | PTE_EXT_AP_MASK -@ tst r1, #L_PTE_EXEC -@ orreq r2, r2, #PTE_EXT_XN + tst r1, #L_PTE_EXEC + orreq r2, r2, #PTE_EXT_XN tst r1, #L_PTE_PRESENT moveq r2, #0 @@ -221,7 +229,7 @@ __v6_setup: mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs mcr p15, 0, r0, c2, c0, 2 @ TTB control register #ifdef CONFIG_SMP - orr r4, r4, #2 @ set shared pgtable + orr r4, r4, #TTB_RGN_WBWA|TTB_S @ mark PTWs shared, outer cacheable #endif mcr p15, 0, r4, c2, c0, 1 @ load TTB1 #ifdef CONFIG_VFP -- cgit v1.2.3-18-g5258 From dbffa471611d3fc4b401ebabf7bb63ac0e0272b1 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Mon, 27 Mar 2006 01:14:26 -0800 Subject: [PATCH] PM-Timer: don't use workaround if chipset is not buggy Current timer_pm.c reads I/O port triple times, in order to avoid the bug of chipset. But I/O port is slow. 2.6.16 (pmtmr) Simple gettimeofday: 3.6532 microseconds 2.6.16+patch (pmtmr) Simple gettimeofday: 1.4582 microseconds [if chip is buggy, probably it will be 7us or more in 4.2% of probability.] This patch adds blacklist of buggy chip, and if chip is not buggy, this uses fast normal version instead of slow workaround version. If chip is buggy, warnings "pmtmr is slow". But sounds like there is gray zone. I found the PIIX4 errata, but I couldn't find the ICH4 errata. But some motherboard seems to have problem. So, if we found a ICH4, generate warnings, and use a workaround version. If user's ICH4 is good, the user can specify the "pmtmr_good" boot parameter to use fast version. Acked-by: John Stultz Signed-off-by: OGAWA Hirofumi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/timers/timer_pm.c | 104 +++++++++++++++++++++++++++++++------ 1 file changed, 89 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/timers/timer_pm.c b/arch/i386/kernel/timers/timer_pm.c index 264edaaac31..144e94a0493 100644 --- a/arch/i386/kernel/timers/timer_pm.c +++ b/arch/i386/kernel/timers/timer_pm.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -45,24 +46,31 @@ static seqlock_t monotonic_lock = SEQLOCK_UNLOCKED; #define ACPI_PM_MASK 0xFFFFFF /* limit it to 24 bits */ +static int pmtmr_need_workaround __read_mostly = 1; + /*helper function to safely read acpi pm timesource*/ static inline u32 read_pmtmr(void) { - u32 v1=0,v2=0,v3=0; - /* It has been reported that because of various broken - * chipsets (ICH4, PIIX4 and PIIX4E) where the ACPI PM time - * source is not latched, so you must read it multiple - * times to insure a safe value is read. - */ - do { - v1 = inl(pmtmr_ioport); - v2 = inl(pmtmr_ioport); - v3 = inl(pmtmr_ioport); - } while ((v1 > v2 && v1 < v3) || (v2 > v3 && v2 < v1) - || (v3 > v1 && v3 < v2)); - - /* mask the output to 24 bits */ - return v2 & ACPI_PM_MASK; + if (pmtmr_need_workaround) { + u32 v1, v2, v3; + + /* It has been reported that because of various broken + * chipsets (ICH4, PIIX4 and PIIX4E) where the ACPI PM time + * source is not latched, so you must read it multiple + * times to insure a safe value is read. + */ + do { + v1 = inl(pmtmr_ioport); + v2 = inl(pmtmr_ioport); + v3 = inl(pmtmr_ioport); + } while ((v1 > v2 && v1 < v3) || (v2 > v3 && v2 < v1) + || (v3 > v1 && v3 < v2)); + + /* mask the output to 24 bits */ + return v2 & ACPI_PM_MASK; + } + + return inl(pmtmr_ioport) & ACPI_PM_MASK; } @@ -263,6 +271,72 @@ struct init_timer_opts __initdata timer_pmtmr_init = { .opts = &timer_pmtmr, }; +#ifdef CONFIG_PCI +/* + * PIIX4 Errata: + * + * The power management timer may return improper results when read. + * Although the timer value settles properly after incrementing, + * while incrementing there is a 3 ns window every 69.8 ns where the + * timer value is indeterminate (a 4.2% chance that the data will be + * incorrect when read). As a result, the ACPI free running count up + * timer specification is violated due to erroneous reads. + */ +static int __init pmtmr_bug_check(void) +{ + static struct pci_device_id gray_list[] __initdata = { + /* these chipsets may have bug. */ + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82801DB_0) }, + { }, + }; + struct pci_dev *dev; + int pmtmr_has_bug = 0; + u8 rev; + + if (cur_timer != &timer_pmtmr || !pmtmr_need_workaround) + return 0; + + dev = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82371AB_3, NULL); + if (dev) { + pci_read_config_byte(dev, PCI_REVISION_ID, &rev); + /* the bug has been fixed in PIIX4M */ + if (rev < 3) { + printk(KERN_WARNING "* Found PM-Timer Bug on this " + "chipset. Due to workarounds for a bug,\n" + "* this time source is slow. Consider trying " + "other time sources (clock=)\n"); + pmtmr_has_bug = 1; + } + pci_dev_put(dev); + } + + if (pci_dev_present(gray_list)) { + printk(KERN_WARNING "* This chipset may have PM-Timer Bug. Due" + " to workarounds for a bug,\n" + "* this time source is slow. If you are sure your timer" + " does not have\n" + "* this bug, please use \"pmtmr_good\" to disable the " + "workaround\n"); + pmtmr_has_bug = 1; + } + + if (!pmtmr_has_bug) + pmtmr_need_workaround = 0; + + return 0; +} +device_initcall(pmtmr_bug_check); +#endif + +static int __init pmtr_good_setup(char *__str) +{ + pmtmr_need_workaround = 0; + return 1; +} +__setup("pmtmr_good", pmtr_good_setup); + MODULE_LICENSE("GPL"); MODULE_AUTHOR("Dominik Brodowski "); MODULE_DESCRIPTION("Power Management Timer (PMTMR) as primary timing source for x86"); -- cgit v1.2.3-18-g5258 From c90e12b86595dbd9996336ac9d762487c638d934 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Mon, 27 Mar 2006 01:14:29 -0800 Subject: [PATCH] uml: fix declaration of exit() This fixes a conflict between a header and what gcc "knows" the declaration' to be. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/include/kern.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/um/include/kern.h b/arch/um/include/kern.h index 7d223beccbc..4ce3fc650e5 100644 --- a/arch/um/include/kern.h +++ b/arch/um/include/kern.h @@ -29,7 +29,7 @@ extern int getuid(void); extern int getgid(void); extern int pause(void); extern int write(int, const void *, int); -extern int exit(int); +extern void exit(int); extern int close(int); extern int read(unsigned int, char *, int); extern int pipe(int *); -- cgit v1.2.3-18-g5258 From d9f8b62a6b033fe7226d7c2b2efdd164ca1aa07c Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Mon, 27 Mar 2006 01:14:29 -0800 Subject: [PATCH] uml: fix some printf formats Some printf formats are incorrect for large memory sizes. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/kernel/um_arch.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c index 80c9c18aae9..0c5b9dcfbe2 100644 --- a/arch/um/kernel/um_arch.c +++ b/arch/um/kernel/um_arch.c @@ -421,7 +421,7 @@ int linux_main(int argc, char **argv) #ifndef CONFIG_HIGHMEM highmem = 0; printf("CONFIG_HIGHMEM not enabled - physical memory shrunk " - "to %lu bytes\n", physmem_size); + "to %Lu bytes\n", physmem_size); #endif } @@ -433,8 +433,8 @@ int linux_main(int argc, char **argv) setup_physmem(uml_physmem, uml_reserved, physmem_size, highmem); if(init_maps(physmem_size, iomem_size, highmem)){ - printf("Failed to allocate mem_map for %lu bytes of physical " - "memory and %lu bytes of highmem\n", physmem_size, + printf("Failed to allocate mem_map for %Lu bytes of physical " + "memory and %Lu bytes of highmem\n", physmem_size, highmem); exit(1); } -- cgit v1.2.3-18-g5258 From 63ae2a94d98dd9d94163918539ec80df33f44a69 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Mon, 27 Mar 2006 01:14:30 -0800 Subject: [PATCH] uml: move libc-dependent irq code to os-Linux The serial UML OS-abstraction layer patch (um/kernel dir). This moves all systemcalls from irq_user.c file under os-Linux dir Signed-off-by: Gennady Sharapov Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/include/irq_user.h | 15 ++- arch/um/include/misc_constants.h | 6 ++ arch/um/include/os.h | 16 +++ arch/um/kernel/irq_user.c | 204 +++++++++++--------------------------- arch/um/kernel/smp.c | 14 +-- arch/um/os-Linux/Makefile | 6 +- arch/um/os-Linux/irq.c | 162 ++++++++++++++++++++++++++++++ arch/um/os-Linux/tt.c | 10 ++ arch/um/sys-i386/user-offsets.c | 10 +- arch/um/sys-x86_64/user-offsets.c | 6 ++ 10 files changed, 288 insertions(+), 161 deletions(-) create mode 100644 arch/um/include/misc_constants.h create mode 100644 arch/um/os-Linux/irq.c (limited to 'arch') diff --git a/arch/um/include/irq_user.h b/arch/um/include/irq_user.h index b61deb8b362..69a93c804f0 100644 --- a/arch/um/include/irq_user.h +++ b/arch/um/include/irq_user.h @@ -1,4 +1,4 @@ -/* +/* * Copyright (C) 2001, 2002 Jeff Dike (jdike@karaya.com) * Licensed under the GPL */ @@ -6,6 +6,17 @@ #ifndef __IRQ_USER_H__ #define __IRQ_USER_H__ +struct irq_fd { + struct irq_fd *next; + void *id; + int fd; + int type; + int irq; + int pid; + int events; + int current_events; +}; + enum { IRQ_READ, IRQ_WRITE }; extern void sigio_handler(int sig, union uml_pt_regs *regs); @@ -16,8 +27,6 @@ extern void reactivate_fd(int fd, int irqnum); extern void deactivate_fd(int fd, int irqnum); extern int deactivate_all_fds(void); extern void forward_interrupts(int pid); -extern void init_irq_signals(int on_sigstack); -extern void forward_ipi(int fd, int pid); extern int activate_ipi(int fd, int pid); extern unsigned long irq_lock(void); extern void irq_unlock(unsigned long flags); diff --git a/arch/um/include/misc_constants.h b/arch/um/include/misc_constants.h new file mode 100644 index 00000000000..989bc08de36 --- /dev/null +++ b/arch/um/include/misc_constants.h @@ -0,0 +1,6 @@ +#ifndef __MISC_CONSTANT_H_ +#define __MISC_CONSTANT_H_ + +#include + +#endif diff --git a/arch/um/include/os.h b/arch/um/include/os.h index 2a1c64d8d0b..efae3e6acb5 100644 --- a/arch/um/include/os.h +++ b/arch/um/include/os.h @@ -12,6 +12,7 @@ #include "sysdep/ptrace.h" #include "kern_util.h" #include "skas/mm_id.h" +#include "irq_user.h" #define OS_TYPE_FILE 1 #define OS_TYPE_DIR 2 @@ -198,6 +199,8 @@ extern void os_flush_stdout(void); /* tt.c * for tt mode only (will be deleted in future...) */ +extern void forward_ipi(int fd, int pid); +extern void kill_child_dead(int pid); extern void stop(void); extern int wait_for_stop(int pid, int sig, int cont_type, void *relay); extern int protect_memory(unsigned long addr, unsigned long len, @@ -294,4 +297,17 @@ extern void initial_thread_cb_skas(void (*proc)(void *), extern void halt_skas(void); extern void reboot_skas(void); +/* irq.c */ +extern int os_waiting_for_events(struct irq_fd *active_fds); +extern int os_isatty(int fd); +extern int os_create_pollfd(int fd, int events, void *tmp_pfd, int size_tmpfds); +extern void os_free_irq_by_cb(int (*test)(struct irq_fd *, void *), void *arg, + struct irq_fd *active_fds, struct irq_fd ***last_irq_ptr2); +extern void os_free_irq_later(struct irq_fd *active_fds, + int irq, void *dev_id); +extern int os_get_pollfd(int i); +extern void os_set_pollfd(int i, int fd); +extern void os_set_ioignore(void); +extern void init_irq_signals(int on_sigstack); + #endif diff --git a/arch/um/kernel/irq_user.c b/arch/um/kernel/irq_user.c index 0e32f5f4a88..483e79c5ab9 100644 --- a/arch/um/kernel/irq_user.c +++ b/arch/um/kernel/irq_user.c @@ -1,4 +1,4 @@ -/* +/* * Copyright (C) 2000 Jeff Dike (jdike@karaya.com) * Licensed under the GPL */ @@ -18,53 +18,25 @@ #include "sigio.h" #include "irq_user.h" #include "os.h" +#include "misc_constants.h" -struct irq_fd { - struct irq_fd *next; - void *id; - int fd; - int type; - int irq; - int pid; - int events; - int current_events; -}; - -static struct irq_fd *active_fds = NULL; +struct irq_fd *active_fds = NULL; static struct irq_fd **last_irq_ptr = &active_fds; -static struct pollfd *pollfds = NULL; -static int pollfds_num = 0; -static int pollfds_size = 0; - -extern int io_count, intr_count; - extern void free_irqs(void); void sigio_handler(int sig, union uml_pt_regs *regs) { struct irq_fd *irq_fd; - int i, n; + int n; if(smp_sigio_handler()) return; while(1){ - n = poll(pollfds, pollfds_num, 0); - if(n < 0){ - if(errno == EINTR) continue; - printk("sigio_handler : poll returned %d, " - "errno = %d\n", n, errno); - break; - } - if(n == 0) break; - - irq_fd = active_fds; - for(i = 0; i < pollfds_num; i++){ - if(pollfds[i].revents != 0){ - irq_fd->current_events = pollfds[i].revents; - pollfds[i].fd = -1; - } - irq_fd = irq_fd->next; - } + n = os_waiting_for_events(active_fds); + if (n <= 0) { + if(n == -EINTR) continue; + else break; + } for(irq_fd = active_fds; irq_fd != NULL; irq_fd = irq_fd->next){ if(irq_fd->current_events != 0){ @@ -77,14 +49,9 @@ void sigio_handler(int sig, union uml_pt_regs *regs) free_irqs(); } -int activate_ipi(int fd, int pid) -{ - return(os_set_fd_async(fd, pid)); -} - static void maybe_sigio_broken(int fd, int type) { - if(isatty(fd)){ + if(os_isatty(fd)){ if((type == IRQ_WRITE) && !pty_output_sigio){ write_sigio_workaround(); add_sigio_fd(fd, 0); @@ -96,12 +63,13 @@ static void maybe_sigio_broken(int fd, int type) } } + int activate_fd(int irq, int fd, int type, void *dev_id) { struct pollfd *tmp_pfd; struct irq_fd *new_fd, *irq_fd; unsigned long flags; - int pid, events, err, n, size; + int pid, events, err, n; pid = os_getpid(); err = os_set_fd_async(fd, pid); @@ -113,8 +81,8 @@ int activate_fd(int irq, int fd, int type, void *dev_id) if(new_fd == NULL) goto out; - if(type == IRQ_READ) events = POLLIN | POLLPRI; - else events = POLLOUT; + if(type == IRQ_READ) events = UM_POLLIN | UM_POLLPRI; + else events = UM_POLLOUT; *new_fd = ((struct irq_fd) { .next = NULL, .id = dev_id, .fd = fd, @@ -125,12 +93,12 @@ int activate_fd(int irq, int fd, int type, void *dev_id) .current_events = 0 } ); /* Critical section - locked by a spinlock because this stuff can - * be changed from interrupt handlers. The stuff above is done + * be changed from interrupt handlers. The stuff above is done * outside the lock because it allocates memory. */ /* Actually, it only looks like it can be called from interrupt - * context. The culprit is reactivate_fd, which calls + * context. The culprit is reactivate_fd, which calls * maybe_sigio_broken, which calls write_sigio_workaround, * which calls activate_fd. However, write_sigio_workaround should * only be called once, at boot time. That would make it clear that @@ -147,40 +115,42 @@ int activate_fd(int irq, int fd, int type, void *dev_id) } } - n = pollfds_num; - if(n == pollfds_size){ - while(1){ - /* Here we have to drop the lock in order to call - * kmalloc, which might sleep. If something else - * came in and changed the pollfds array, we free - * the buffer and try again. - */ - irq_unlock(flags); - size = (pollfds_num + 1) * sizeof(pollfds[0]); - tmp_pfd = um_kmalloc(size); - flags = irq_lock(); - if(tmp_pfd == NULL) - goto out_unlock; - if(n == pollfds_size) - break; + /*-------------*/ + if(type == IRQ_WRITE) + fd = -1; + + tmp_pfd = NULL; + n = 0; + + while(1){ + n = os_create_pollfd(fd, events, tmp_pfd, n); + if (n == 0) + break; + + /* n > 0 + * It means we couldn't put new pollfd to current pollfds + * and tmp_fds is NULL or too small for new pollfds array. + * Needed size is equal to n as minimum. + * + * Here we have to drop the lock in order to call + * kmalloc, which might sleep. + * If something else came in and changed the pollfds array + * so we will not be able to put new pollfd struct to pollfds + * then we free the buffer tmp_fds and try again. + */ + irq_unlock(flags); + if (tmp_pfd != NULL) { kfree(tmp_pfd); + tmp_pfd = NULL; } - if(pollfds != NULL){ - memcpy(tmp_pfd, pollfds, - sizeof(pollfds[0]) * pollfds_size); - kfree(pollfds); - } - pollfds = tmp_pfd; - pollfds_size++; - } - if(type == IRQ_WRITE) - fd = -1; + tmp_pfd = um_kmalloc(n); + if (tmp_pfd == NULL) + goto out_kfree; - pollfds[pollfds_num] = ((struct pollfd) { .fd = fd, - .events = events, - .revents = 0 }); - pollfds_num++; + flags = irq_lock(); + } + /*-------------*/ *last_irq_ptr = new_fd; last_irq_ptr = &new_fd->next; @@ -196,6 +166,7 @@ int activate_fd(int irq, int fd, int type, void *dev_id) out_unlock: irq_unlock(flags); + out_kfree: kfree(new_fd); out: return(err); @@ -203,43 +174,10 @@ int activate_fd(int irq, int fd, int type, void *dev_id) static void free_irq_by_cb(int (*test)(struct irq_fd *, void *), void *arg) { - struct irq_fd **prev; unsigned long flags; - int i = 0; flags = irq_lock(); - prev = &active_fds; - while(*prev != NULL){ - if((*test)(*prev, arg)){ - struct irq_fd *old_fd = *prev; - if((pollfds[i].fd != -1) && - (pollfds[i].fd != (*prev)->fd)){ - printk("free_irq_by_cb - mismatch between " - "active_fds and pollfds, fd %d vs %d\n", - (*prev)->fd, pollfds[i].fd); - goto out; - } - - pollfds_num--; - - /* This moves the *whole* array after pollfds[i] (though - * it doesn't spot as such)! */ - - memmove(&pollfds[i], &pollfds[i + 1], - (pollfds_num - i) * sizeof(pollfds[0])); - - if(last_irq_ptr == &old_fd->next) - last_irq_ptr = prev; - *prev = (*prev)->next; - if(old_fd->type == IRQ_WRITE) - ignore_sigio_fd(old_fd->fd); - kfree(old_fd); - continue; - } - prev = &(*prev)->next; - i++; - } - out: + os_free_irq_by_cb(test, arg, active_fds, &last_irq_ptr); irq_unlock(flags); } @@ -277,6 +215,7 @@ static struct irq_fd *find_irq_by_fd(int fd, int irqnum, int *index_out) { struct irq_fd *irq; int i = 0; + int fdi; for(irq=active_fds; irq != NULL; irq = irq->next){ if((irq->fd == fd) && (irq->irq == irqnum)) break; @@ -286,10 +225,11 @@ static struct irq_fd *find_irq_by_fd(int fd, int irqnum, int *index_out) printk("find_irq_by_fd doesn't have descriptor %d\n", fd); goto out; } - if((pollfds[i].fd != -1) && (pollfds[i].fd != fd)){ + fdi = os_get_pollfd(i); + if((fdi != -1) && (fdi != fd)){ printk("find_irq_by_fd - mismatch between active_fds and " - "pollfds, fd %d vs %d, need %d\n", irq->fd, - pollfds[i].fd, fd); + "pollfds, fd %d vs %d, need %d\n", irq->fd, + fdi, fd); irq = NULL; goto out; } @@ -310,9 +250,7 @@ void reactivate_fd(int fd, int irqnum) irq_unlock(flags); return; } - - pollfds[i].fd = irq->fd; - + os_set_pollfd(i, irq->fd); irq_unlock(flags); /* This calls activate_fd, so it has to be outside the critical @@ -331,7 +269,7 @@ void deactivate_fd(int fd, int irqnum) irq = find_irq_by_fd(fd, irqnum, &i); if(irq == NULL) goto out; - pollfds[i].fd = -1; + os_set_pollfd(i, -1); out: irq_unlock(flags); } @@ -347,21 +285,11 @@ int deactivate_all_fds(void) return(err); } /* If there is a signal already queued, after unblocking ignore it */ - set_handler(SIGIO, SIG_IGN, 0, -1); + os_set_ioignore(); return(0); } -void forward_ipi(int fd, int pid) -{ - int err; - - err = os_set_owner(fd, pid); - if(err < 0) - printk("forward_ipi: set_owner failed, fd = %d, me = %d, " - "target = %d, err = %d\n", fd, os_getpid(), pid, -err); -} - void forward_interrupts(int pid) { struct irq_fd *irq; @@ -384,22 +312,6 @@ void forward_interrupts(int pid) irq_unlock(flags); } -void init_irq_signals(int on_sigstack) -{ - __sighandler_t h; - int flags; - - flags = on_sigstack ? SA_ONSTACK : 0; - if(timer_irq_inited) h = (__sighandler_t) alarm_handler; - else h = boot_timer_handler; - - set_handler(SIGVTALRM, h, flags | SA_RESTART, - SIGUSR1, SIGIO, SIGWINCH, SIGALRM, -1); - set_handler(SIGIO, (__sighandler_t) sig_handler, flags | SA_RESTART, - SIGUSR1, SIGIO, SIGWINCH, SIGALRM, SIGVTALRM, -1); - signal(SIGWINCH, SIG_IGN); -} - /* * Overrides for Emacs so that we follow Linus's tabbing style. * Emacs will notice this stuff at the end of the file and automatically diff --git a/arch/um/kernel/smp.c b/arch/um/kernel/smp.c index 72113b0a96e..c8d8d0ac1a7 100644 --- a/arch/um/kernel/smp.c +++ b/arch/um/kernel/smp.c @@ -1,4 +1,4 @@ -/* +/* * Copyright (C) 2000 - 2003 Jeff Dike (jdike@addtoit.com) * Licensed under the GPL */ @@ -77,9 +77,9 @@ static int idle_proc(void *cpup) if(err < 0) panic("CPU#%d failed to create IPI pipe, err = %d", cpu, -err); - activate_ipi(cpu_data[cpu].ipi_pipe[0], + os_set_fd_async(cpu_data[cpu].ipi_pipe[0], current->thread.mode.tt.extern_pid); - + wmb(); if (cpu_test_and_set(cpu, cpu_callin_map)) { printk("huh, CPU#%d already present??\n", cpu); @@ -106,7 +106,7 @@ static struct task_struct *idle_thread(int cpu) panic("copy_process failed in idle_thread, error = %ld", PTR_ERR(new_task)); - cpu_tasks[cpu] = ((struct cpu_task) + cpu_tasks[cpu] = ((struct cpu_task) { .pid = new_task->thread.mode.tt.extern_pid, .task = new_task } ); idle_threads[cpu] = new_task; @@ -134,12 +134,12 @@ void smp_prepare_cpus(unsigned int maxcpus) if(err < 0) panic("CPU#0 failed to create IPI pipe, errno = %d", -err); - activate_ipi(cpu_data[me].ipi_pipe[0], + os_set_fd_async(cpu_data[me].ipi_pipe[0], current->thread.mode.tt.extern_pid); for(cpu = 1; cpu < ncpus; cpu++){ printk("Booting processor %d...\n", cpu); - + idle = idle_thread(cpu); init_idle(idle, cpu); @@ -223,7 +223,7 @@ void smp_call_function_slave(int cpu) atomic_inc(&scf_finished); } -int smp_call_function(void (*_func)(void *info), void *_info, int nonatomic, +int smp_call_function(void (*_func)(void *info), void *_info, int nonatomic, int wait) { int cpus = num_online_cpus() - 1; diff --git a/arch/um/os-Linux/Makefile b/arch/um/os-Linux/Makefile index 08a4e628b24..73d3d837ed6 100644 --- a/arch/um/os-Linux/Makefile +++ b/arch/um/os-Linux/Makefile @@ -3,14 +3,14 @@ # Licensed under the GPL # -obj-y = aio.o elf_aux.o file.o helper.o main.o mem.o process.o signal.o \ +obj-y = aio.o elf_aux.o file.o helper.o irq.o main.o mem.o process.o signal.o \ start_up.o time.o trap.o tt.o tty.o uaccess.o umid.o user_syms.o \ util.o drivers/ sys-$(SUBARCH)/ obj-$(CONFIG_MODE_SKAS) += skas/ -USER_OBJS := aio.o elf_aux.o file.o helper.o main.o mem.o process.o signal.o \ - start_up.o time.o trap.o tt.o tty.o uaccess.o umid.o util.o +USER_OBJS := aio.o elf_aux.o file.o helper.o irq.o main.o mem.o process.o \ + signal.o start_up.o time.o trap.o tt.o tty.o uaccess.o umid.o util.o elf_aux.o: $(ARCH_DIR)/kernel-offsets.h CFLAGS_elf_aux.o += -I$(objtree)/arch/um diff --git a/arch/um/os-Linux/irq.c b/arch/um/os-Linux/irq.c new file mode 100644 index 00000000000..e599be423da --- /dev/null +++ b/arch/um/os-Linux/irq.c @@ -0,0 +1,162 @@ +/* + * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "user_util.h" +#include "kern_util.h" +#include "user.h" +#include "process.h" +#include "sigio.h" +#include "irq_user.h" +#include "os.h" + +static struct pollfd *pollfds = NULL; +static int pollfds_num = 0; +static int pollfds_size = 0; + +int os_waiting_for_events(struct irq_fd *active_fds) +{ + struct irq_fd *irq_fd; + int i, n, err; + + n = poll(pollfds, pollfds_num, 0); + if(n < 0){ + err = -errno; + if(errno != EINTR) + printk("sigio_handler: os_waiting_for_events:" + " poll returned %d, errno = %d\n", n, errno); + return err; + } + + if(n == 0) + return 0; + + irq_fd = active_fds; + + for(i = 0; i < pollfds_num; i++){ + if(pollfds[i].revents != 0){ + irq_fd->current_events = pollfds[i].revents; + pollfds[i].fd = -1; + } + irq_fd = irq_fd->next; + } + return n; +} + +int os_isatty(int fd) +{ + return(isatty(fd)); +} + +int os_create_pollfd(int fd, int events, void *tmp_pfd, int size_tmpfds) +{ + if (pollfds_num == pollfds_size) { + if (size_tmpfds <= pollfds_size * sizeof(pollfds[0])) { + /* return min size needed for new pollfds area */ + return((pollfds_size + 1) * sizeof(pollfds[0])); + } + + if(pollfds != NULL){ + memcpy(tmp_pfd, pollfds, + sizeof(pollfds[0]) * pollfds_size); + /* remove old pollfds */ + kfree(pollfds); + } + pollfds = tmp_pfd; + pollfds_size++; + } else { + /* remove not used tmp_pfd */ + if (tmp_pfd != NULL) + kfree(tmp_pfd); + } + + pollfds[pollfds_num] = ((struct pollfd) { .fd = fd, + .events = events, + .revents = 0 }); + pollfds_num++; + + return(0); +} + +void os_free_irq_by_cb(int (*test)(struct irq_fd *, void *), void *arg, + struct irq_fd *active_fds, struct irq_fd ***last_irq_ptr2) +{ + struct irq_fd **prev; + int i = 0; + + prev = &active_fds; + while(*prev != NULL){ + if((*test)(*prev, arg)){ + struct irq_fd *old_fd = *prev; + if((pollfds[i].fd != -1) && + (pollfds[i].fd != (*prev)->fd)){ + printk("os_free_irq_by_cb - mismatch between " + "active_fds and pollfds, fd %d vs %d\n", + (*prev)->fd, pollfds[i].fd); + goto out; + } + + pollfds_num--; + + /* This moves the *whole* array after pollfds[i] + * (though it doesn't spot as such)! + */ + + memmove(&pollfds[i], &pollfds[i + 1], + (pollfds_num - i) * sizeof(pollfds[0])); + if(*last_irq_ptr2 == &old_fd->next) + *last_irq_ptr2 = prev; + + *prev = (*prev)->next; + if(old_fd->type == IRQ_WRITE) + ignore_sigio_fd(old_fd->fd); + kfree(old_fd); + continue; + } + prev = &(*prev)->next; + i++; + } + out: + return; +} + + +int os_get_pollfd(int i) +{ + return(pollfds[i].fd); +} + +void os_set_pollfd(int i, int fd) +{ + pollfds[i].fd = fd; +} + +void os_set_ioignore(void) +{ + set_handler(SIGIO, SIG_IGN, 0, -1); +} + +void init_irq_signals(int on_sigstack) +{ + __sighandler_t h; + int flags; + + flags = on_sigstack ? SA_ONSTACK : 0; + if(timer_irq_inited) h = (__sighandler_t) alarm_handler; + else h = boot_timer_handler; + + set_handler(SIGVTALRM, h, flags | SA_RESTART, + SIGUSR1, SIGIO, SIGWINCH, SIGALRM, -1); + set_handler(SIGIO, (__sighandler_t) sig_handler, flags | SA_RESTART, + SIGUSR1, SIGIO, SIGWINCH, SIGALRM, SIGVTALRM, -1); + signal(SIGWINCH, SIG_IGN); +} diff --git a/arch/um/os-Linux/tt.c b/arch/um/os-Linux/tt.c index 919d19f1153..5461a065bbb 100644 --- a/arch/um/os-Linux/tt.c +++ b/arch/um/os-Linux/tt.c @@ -110,6 +110,16 @@ int wait_for_stop(int pid, int sig, int cont_type, void *relay) } } +void forward_ipi(int fd, int pid) +{ + int err; + + err = os_set_owner(fd, pid); + if(err < 0) + printk("forward_ipi: set_owner failed, fd = %d, me = %d, " + "target = %d, err = %d\n", fd, os_getpid(), pid, -err); +} + /* *------------------------- * only for tt mode (will be deleted in future...) diff --git a/arch/um/sys-i386/user-offsets.c b/arch/um/sys-i386/user-offsets.c index 26b68675053..6f4ef2b7fa4 100644 --- a/arch/um/sys-i386/user-offsets.c +++ b/arch/um/sys-i386/user-offsets.c @@ -3,12 +3,13 @@ #include #include #include +#include #define DEFINE(sym, val) \ - asm volatile("\n->" #sym " %0 " #val : : "i" (val)) + asm volatile("\n->" #sym " %0 " #val : : "i" (val)) #define DEFINE_LONGS(sym, val) \ - asm volatile("\n->" #sym " %0 " #val : : "i" (val/sizeof(unsigned long))) + asm volatile("\n->" #sym " %0 " #val : : "i" (val/sizeof(unsigned long))) #define OFFSET(sym, str, mem) \ DEFINE(sym, offsetof(struct str, mem)); @@ -67,4 +68,9 @@ void foo(void) DEFINE(HOST_ES, ES); DEFINE(HOST_GS, GS); DEFINE(UM_FRAME_SIZE, sizeof(struct user_regs_struct)); + + /* XXX Duplicated between i386 and x86_64 */ + DEFINE(UM_POLLIN, POLLIN); + DEFINE(UM_POLLPRI, POLLPRI); + DEFINE(UM_POLLOUT, POLLOUT); } diff --git a/arch/um/sys-x86_64/user-offsets.c b/arch/um/sys-x86_64/user-offsets.c index 7bd54a921cf..899cebb57c3 100644 --- a/arch/um/sys-x86_64/user-offsets.c +++ b/arch/um/sys-x86_64/user-offsets.c @@ -1,6 +1,7 @@ #include #include #include +#include #define __FRAME_OFFSETS #include #include @@ -88,4 +89,9 @@ void foo(void) DEFINE_LONGS(HOST_IP, RIP); DEFINE_LONGS(HOST_SP, RSP); DEFINE(UM_FRAME_SIZE, sizeof(struct user_regs_struct)); + + /* XXX Duplicated between i386 and x86_64 */ + DEFINE(UM_POLLIN, POLLIN); + DEFINE(UM_POLLPRI, POLLPRI); + DEFINE(UM_POLLOUT, POLLOUT); } -- cgit v1.2.3-18-g5258 From 9b4f018d92dbeff9305b4cf4aa80874c3974cfcc Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Mon, 27 Mar 2006 01:14:31 -0800 Subject: [PATCH] uml: merge irq_user.c and irq.c The serial UML OS-abstraction layer patch (um/kernel dir). This joins irq_user.c and irq.c files. Signed-off-by: Gennady Sharapov Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/kernel/Makefile | 2 +- arch/um/kernel/irq.c | 294 +++++++++++++++++++++++++++++++++++++++++ arch/um/kernel/irq_user.c | 324 ---------------------------------------------- 3 files changed, 295 insertions(+), 325 deletions(-) delete mode 100644 arch/um/kernel/irq_user.c (limited to 'arch') diff --git a/arch/um/kernel/Makefile b/arch/um/kernel/Makefile index 693018ba80f..8458c30a626 100644 --- a/arch/um/kernel/Makefile +++ b/arch/um/kernel/Makefile @@ -7,7 +7,7 @@ extra-y := vmlinux.lds clean-files := obj-y = config.o exec_kern.o exitcode.o \ - init_task.o irq.o irq_user.o ksyms.o mem.o physmem.o \ + init_task.o irq.o ksyms.o mem.o physmem.o \ process_kern.o ptrace.o reboot.o resource.o sigio_user.o sigio_kern.o \ signal_kern.o smp.o syscall_kern.o sysrq.o \ time_kern.o tlb.o trap_kern.o uaccess.o um_arch.o umid.o diff --git a/arch/um/kernel/irq.c b/arch/um/kernel/irq.c index bbf94bf2921..c39ea3abeda 100644 --- a/arch/um/kernel/irq.c +++ b/arch/um/kernel/irq.c @@ -31,6 +31,8 @@ #include "irq_user.h" #include "irq_kern.h" #include "os.h" +#include "sigio.h" +#include "misc_constants.h" /* * Generic, controller-independent functions: @@ -77,6 +79,298 @@ skip: return 0; } +struct irq_fd *active_fds = NULL; +static struct irq_fd **last_irq_ptr = &active_fds; + +extern void free_irqs(void); + +void sigio_handler(int sig, union uml_pt_regs *regs) +{ + struct irq_fd *irq_fd; + int n; + + if(smp_sigio_handler()) return; + while(1){ + n = os_waiting_for_events(active_fds); + if (n <= 0) { + if(n == -EINTR) continue; + else break; + } + + for(irq_fd = active_fds; irq_fd != NULL; irq_fd = irq_fd->next){ + if(irq_fd->current_events != 0){ + irq_fd->current_events = 0; + do_IRQ(irq_fd->irq, regs); + } + } + } + + free_irqs(); +} + +static void maybe_sigio_broken(int fd, int type) +{ + if(os_isatty(fd)){ + if((type == IRQ_WRITE) && !pty_output_sigio){ + write_sigio_workaround(); + add_sigio_fd(fd, 0); + } + else if((type == IRQ_READ) && !pty_close_sigio){ + write_sigio_workaround(); + add_sigio_fd(fd, 1); + } + } +} + + +int activate_fd(int irq, int fd, int type, void *dev_id) +{ + struct pollfd *tmp_pfd; + struct irq_fd *new_fd, *irq_fd; + unsigned long flags; + int pid, events, err, n; + + pid = os_getpid(); + err = os_set_fd_async(fd, pid); + if(err < 0) + goto out; + + new_fd = um_kmalloc(sizeof(*new_fd)); + err = -ENOMEM; + if(new_fd == NULL) + goto out; + + if(type == IRQ_READ) events = UM_POLLIN | UM_POLLPRI; + else events = UM_POLLOUT; + *new_fd = ((struct irq_fd) { .next = NULL, + .id = dev_id, + .fd = fd, + .type = type, + .irq = irq, + .pid = pid, + .events = events, + .current_events = 0 } ); + + /* Critical section - locked by a spinlock because this stuff can + * be changed from interrupt handlers. The stuff above is done + * outside the lock because it allocates memory. + */ + + /* Actually, it only looks like it can be called from interrupt + * context. The culprit is reactivate_fd, which calls + * maybe_sigio_broken, which calls write_sigio_workaround, + * which calls activate_fd. However, write_sigio_workaround should + * only be called once, at boot time. That would make it clear that + * this is called only from process context, and can be locked with + * a semaphore. + */ + flags = irq_lock(); + for(irq_fd = active_fds; irq_fd != NULL; irq_fd = irq_fd->next){ + if((irq_fd->fd == fd) && (irq_fd->type == type)){ + printk("Registering fd %d twice\n", fd); + printk("Irqs : %d, %d\n", irq_fd->irq, irq); + printk("Ids : 0x%p, 0x%p\n", irq_fd->id, dev_id); + goto out_unlock; + } + } + + /*-------------*/ + if(type == IRQ_WRITE) + fd = -1; + + tmp_pfd = NULL; + n = 0; + + while(1){ + n = os_create_pollfd(fd, events, tmp_pfd, n); + if (n == 0) + break; + + /* n > 0 + * It means we couldn't put new pollfd to current pollfds + * and tmp_fds is NULL or too small for new pollfds array. + * Needed size is equal to n as minimum. + * + * Here we have to drop the lock in order to call + * kmalloc, which might sleep. + * If something else came in and changed the pollfds array + * so we will not be able to put new pollfd struct to pollfds + * then we free the buffer tmp_fds and try again. + */ + irq_unlock(flags); + if (tmp_pfd != NULL) { + kfree(tmp_pfd); + tmp_pfd = NULL; + } + + tmp_pfd = um_kmalloc(n); + if (tmp_pfd == NULL) + goto out_kfree; + + flags = irq_lock(); + } + /*-------------*/ + + *last_irq_ptr = new_fd; + last_irq_ptr = &new_fd->next; + + irq_unlock(flags); + + /* This calls activate_fd, so it has to be outside the critical + * section. + */ + maybe_sigio_broken(fd, type); + + return(0); + + out_unlock: + irq_unlock(flags); + out_kfree: + kfree(new_fd); + out: + return(err); +} + +static void free_irq_by_cb(int (*test)(struct irq_fd *, void *), void *arg) +{ + unsigned long flags; + + flags = irq_lock(); + os_free_irq_by_cb(test, arg, active_fds, &last_irq_ptr); + irq_unlock(flags); +} + +struct irq_and_dev { + int irq; + void *dev; +}; + +static int same_irq_and_dev(struct irq_fd *irq, void *d) +{ + struct irq_and_dev *data = d; + + return((irq->irq == data->irq) && (irq->id == data->dev)); +} + +void free_irq_by_irq_and_dev(unsigned int irq, void *dev) +{ + struct irq_and_dev data = ((struct irq_and_dev) { .irq = irq, + .dev = dev }); + + free_irq_by_cb(same_irq_and_dev, &data); +} + +static int same_fd(struct irq_fd *irq, void *fd) +{ + return(irq->fd == *((int *) fd)); +} + +void free_irq_by_fd(int fd) +{ + free_irq_by_cb(same_fd, &fd); +} + +static struct irq_fd *find_irq_by_fd(int fd, int irqnum, int *index_out) +{ + struct irq_fd *irq; + int i = 0; + int fdi; + + for(irq=active_fds; irq != NULL; irq = irq->next){ + if((irq->fd == fd) && (irq->irq == irqnum)) break; + i++; + } + if(irq == NULL){ + printk("find_irq_by_fd doesn't have descriptor %d\n", fd); + goto out; + } + fdi = os_get_pollfd(i); + if((fdi != -1) && (fdi != fd)){ + printk("find_irq_by_fd - mismatch between active_fds and " + "pollfds, fd %d vs %d, need %d\n", irq->fd, + fdi, fd); + irq = NULL; + goto out; + } + *index_out = i; + out: + return(irq); +} + +void reactivate_fd(int fd, int irqnum) +{ + struct irq_fd *irq; + unsigned long flags; + int i; + + flags = irq_lock(); + irq = find_irq_by_fd(fd, irqnum, &i); + if(irq == NULL){ + irq_unlock(flags); + return; + } + os_set_pollfd(i, irq->fd); + irq_unlock(flags); + + /* This calls activate_fd, so it has to be outside the critical + * section. + */ + maybe_sigio_broken(fd, irq->type); +} + +void deactivate_fd(int fd, int irqnum) +{ + struct irq_fd *irq; + unsigned long flags; + int i; + + flags = irq_lock(); + irq = find_irq_by_fd(fd, irqnum, &i); + if(irq == NULL) + goto out; + os_set_pollfd(i, -1); + out: + irq_unlock(flags); +} + +int deactivate_all_fds(void) +{ + struct irq_fd *irq; + int err; + + for(irq=active_fds;irq != NULL;irq = irq->next){ + err = os_clear_fd_async(irq->fd); + if(err) + return(err); + } + /* If there is a signal already queued, after unblocking ignore it */ + os_set_ioignore(); + + return(0); +} + +void forward_interrupts(int pid) +{ + struct irq_fd *irq; + unsigned long flags; + int err; + + flags = irq_lock(); + for(irq=active_fds;irq != NULL;irq = irq->next){ + err = os_set_owner(irq->fd, pid); + if(err < 0){ + /* XXX Just remove the irq rather than + * print out an infinite stream of these + */ + printk("Failed to forward %d to pid %d, err = %d\n", + irq->fd, pid, -err); + } + + irq->pid = pid; + } + irq_unlock(flags); +} + /* * do_IRQ handles all normal device IRQ's (the special * SMP cross-CPU interrupts have their own specific diff --git a/arch/um/kernel/irq_user.c b/arch/um/kernel/irq_user.c deleted file mode 100644 index 483e79c5ab9..00000000000 --- a/arch/um/kernel/irq_user.c +++ /dev/null @@ -1,324 +0,0 @@ -/* - * Copyright (C) 2000 Jeff Dike (jdike@karaya.com) - * Licensed under the GPL - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include "user_util.h" -#include "kern_util.h" -#include "user.h" -#include "process.h" -#include "sigio.h" -#include "irq_user.h" -#include "os.h" -#include "misc_constants.h" - -struct irq_fd *active_fds = NULL; -static struct irq_fd **last_irq_ptr = &active_fds; - -extern void free_irqs(void); - -void sigio_handler(int sig, union uml_pt_regs *regs) -{ - struct irq_fd *irq_fd; - int n; - - if(smp_sigio_handler()) return; - while(1){ - n = os_waiting_for_events(active_fds); - if (n <= 0) { - if(n == -EINTR) continue; - else break; - } - - for(irq_fd = active_fds; irq_fd != NULL; irq_fd = irq_fd->next){ - if(irq_fd->current_events != 0){ - irq_fd->current_events = 0; - do_IRQ(irq_fd->irq, regs); - } - } - } - - free_irqs(); -} - -static void maybe_sigio_broken(int fd, int type) -{ - if(os_isatty(fd)){ - if((type == IRQ_WRITE) && !pty_output_sigio){ - write_sigio_workaround(); - add_sigio_fd(fd, 0); - } - else if((type == IRQ_READ) && !pty_close_sigio){ - write_sigio_workaround(); - add_sigio_fd(fd, 1); - } - } -} - - -int activate_fd(int irq, int fd, int type, void *dev_id) -{ - struct pollfd *tmp_pfd; - struct irq_fd *new_fd, *irq_fd; - unsigned long flags; - int pid, events, err, n; - - pid = os_getpid(); - err = os_set_fd_async(fd, pid); - if(err < 0) - goto out; - - new_fd = um_kmalloc(sizeof(*new_fd)); - err = -ENOMEM; - if(new_fd == NULL) - goto out; - - if(type == IRQ_READ) events = UM_POLLIN | UM_POLLPRI; - else events = UM_POLLOUT; - *new_fd = ((struct irq_fd) { .next = NULL, - .id = dev_id, - .fd = fd, - .type = type, - .irq = irq, - .pid = pid, - .events = events, - .current_events = 0 } ); - - /* Critical section - locked by a spinlock because this stuff can - * be changed from interrupt handlers. The stuff above is done - * outside the lock because it allocates memory. - */ - - /* Actually, it only looks like it can be called from interrupt - * context. The culprit is reactivate_fd, which calls - * maybe_sigio_broken, which calls write_sigio_workaround, - * which calls activate_fd. However, write_sigio_workaround should - * only be called once, at boot time. That would make it clear that - * this is called only from process context, and can be locked with - * a semaphore. - */ - flags = irq_lock(); - for(irq_fd = active_fds; irq_fd != NULL; irq_fd = irq_fd->next){ - if((irq_fd->fd == fd) && (irq_fd->type == type)){ - printk("Registering fd %d twice\n", fd); - printk("Irqs : %d, %d\n", irq_fd->irq, irq); - printk("Ids : 0x%x, 0x%x\n", irq_fd->id, dev_id); - goto out_unlock; - } - } - - /*-------------*/ - if(type == IRQ_WRITE) - fd = -1; - - tmp_pfd = NULL; - n = 0; - - while(1){ - n = os_create_pollfd(fd, events, tmp_pfd, n); - if (n == 0) - break; - - /* n > 0 - * It means we couldn't put new pollfd to current pollfds - * and tmp_fds is NULL or too small for new pollfds array. - * Needed size is equal to n as minimum. - * - * Here we have to drop the lock in order to call - * kmalloc, which might sleep. - * If something else came in and changed the pollfds array - * so we will not be able to put new pollfd struct to pollfds - * then we free the buffer tmp_fds and try again. - */ - irq_unlock(flags); - if (tmp_pfd != NULL) { - kfree(tmp_pfd); - tmp_pfd = NULL; - } - - tmp_pfd = um_kmalloc(n); - if (tmp_pfd == NULL) - goto out_kfree; - - flags = irq_lock(); - } - /*-------------*/ - - *last_irq_ptr = new_fd; - last_irq_ptr = &new_fd->next; - - irq_unlock(flags); - - /* This calls activate_fd, so it has to be outside the critical - * section. - */ - maybe_sigio_broken(fd, type); - - return(0); - - out_unlock: - irq_unlock(flags); - out_kfree: - kfree(new_fd); - out: - return(err); -} - -static void free_irq_by_cb(int (*test)(struct irq_fd *, void *), void *arg) -{ - unsigned long flags; - - flags = irq_lock(); - os_free_irq_by_cb(test, arg, active_fds, &last_irq_ptr); - irq_unlock(flags); -} - -struct irq_and_dev { - int irq; - void *dev; -}; - -static int same_irq_and_dev(struct irq_fd *irq, void *d) -{ - struct irq_and_dev *data = d; - - return((irq->irq == data->irq) && (irq->id == data->dev)); -} - -void free_irq_by_irq_and_dev(unsigned int irq, void *dev) -{ - struct irq_and_dev data = ((struct irq_and_dev) { .irq = irq, - .dev = dev }); - - free_irq_by_cb(same_irq_and_dev, &data); -} - -static int same_fd(struct irq_fd *irq, void *fd) -{ - return(irq->fd == *((int *) fd)); -} - -void free_irq_by_fd(int fd) -{ - free_irq_by_cb(same_fd, &fd); -} - -static struct irq_fd *find_irq_by_fd(int fd, int irqnum, int *index_out) -{ - struct irq_fd *irq; - int i = 0; - int fdi; - - for(irq=active_fds; irq != NULL; irq = irq->next){ - if((irq->fd == fd) && (irq->irq == irqnum)) break; - i++; - } - if(irq == NULL){ - printk("find_irq_by_fd doesn't have descriptor %d\n", fd); - goto out; - } - fdi = os_get_pollfd(i); - if((fdi != -1) && (fdi != fd)){ - printk("find_irq_by_fd - mismatch between active_fds and " - "pollfds, fd %d vs %d, need %d\n", irq->fd, - fdi, fd); - irq = NULL; - goto out; - } - *index_out = i; - out: - return(irq); -} - -void reactivate_fd(int fd, int irqnum) -{ - struct irq_fd *irq; - unsigned long flags; - int i; - - flags = irq_lock(); - irq = find_irq_by_fd(fd, irqnum, &i); - if(irq == NULL){ - irq_unlock(flags); - return; - } - os_set_pollfd(i, irq->fd); - irq_unlock(flags); - - /* This calls activate_fd, so it has to be outside the critical - * section. - */ - maybe_sigio_broken(fd, irq->type); -} - -void deactivate_fd(int fd, int irqnum) -{ - struct irq_fd *irq; - unsigned long flags; - int i; - - flags = irq_lock(); - irq = find_irq_by_fd(fd, irqnum, &i); - if(irq == NULL) - goto out; - os_set_pollfd(i, -1); - out: - irq_unlock(flags); -} - -int deactivate_all_fds(void) -{ - struct irq_fd *irq; - int err; - - for(irq=active_fds;irq != NULL;irq = irq->next){ - err = os_clear_fd_async(irq->fd); - if(err) - return(err); - } - /* If there is a signal already queued, after unblocking ignore it */ - os_set_ioignore(); - - return(0); -} - -void forward_interrupts(int pid) -{ - struct irq_fd *irq; - unsigned long flags; - int err; - - flags = irq_lock(); - for(irq=active_fds;irq != NULL;irq = irq->next){ - err = os_set_owner(irq->fd, pid); - if(err < 0){ - /* XXX Just remove the irq rather than - * print out an infinite stream of these - */ - printk("Failed to forward %d to pid %d, err = %d\n", - irq->fd, pid, -err); - } - - irq->pid = pid; - } - irq_unlock(flags); -} - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ -- cgit v1.2.3-18-g5258 From 8e367065eea04a6fde5cb8f3854164af99c45693 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Mon, 27 Mar 2006 01:14:32 -0800 Subject: [PATCH] uml: move SIGIO startup code to os-Linux/start_up.c The serial UML OS-abstraction layer patch (um/kernel dir). This moves all startup code from sigio_user.c file under os-Linux dir Signed-off-by: Gennady Sharapov Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/include/os.h | 1 + arch/um/include/sigio.h | 1 - arch/um/kernel/sigio_kern.c | 10 ++- arch/um/kernel/sigio_user.c | 162 +++----------------------------------------- arch/um/kernel/um_arch.c | 3 +- arch/um/os-Linux/start_up.c | 128 ++++++++++++++++++++++++++++++++++ 6 files changed, 148 insertions(+), 157 deletions(-) (limited to 'arch') diff --git a/arch/um/include/os.h b/arch/um/include/os.h index efae3e6acb5..6d865d4eade 100644 --- a/arch/um/include/os.h +++ b/arch/um/include/os.h @@ -161,6 +161,7 @@ extern int os_lock_file(int fd, int excl); /* start_up.c */ extern void os_early_checks(void); extern int can_do_skas(void); +extern void os_check_bugs(void); /* Make sure they are clear when running in TT mode. Required by * SEGV_MAYBE_FIXABLE */ diff --git a/arch/um/include/sigio.h b/arch/um/include/sigio.h index 37d76e29a14..1432fcfb321 100644 --- a/arch/um/include/sigio.h +++ b/arch/um/include/sigio.h @@ -8,7 +8,6 @@ extern int write_sigio_irq(int fd); extern int register_sigio_fd(int fd); -extern int read_sigio_fd(int fd); extern int add_sigio_fd(int fd, int read); extern int ignore_sigio_fd(int fd); extern void sigio_lock(void); diff --git a/arch/um/kernel/sigio_kern.c b/arch/um/kernel/sigio_kern.c index 229988463c4..1c1300fb1e9 100644 --- a/arch/um/kernel/sigio_kern.c +++ b/arch/um/kernel/sigio_kern.c @@ -1,4 +1,4 @@ -/* +/* * Copyright (C) 2002 - 2003 Jeff Dike (jdike@addtoit.com) * Licensed under the GPL */ @@ -12,13 +12,16 @@ #include "sigio.h" #include "irq_user.h" #include "irq_kern.h" +#include "os.h" /* Protected by sigio_lock() called from write_sigio_workaround */ static int sigio_irq_fd = -1; static irqreturn_t sigio_interrupt(int irq, void *data, struct pt_regs *unused) { - read_sigio_fd(sigio_irq_fd); + char c; + + os_read_file(sigio_irq_fd, &c, sizeof(c)); reactivate_fd(sigio_irq_fd, SIGIO_WRITE_IRQ); return(IRQ_HANDLED); } @@ -51,6 +54,9 @@ void sigio_unlock(void) spin_unlock(&sigio_spinlock); } +extern void sigio_cleanup(void); +__uml_exitcall(sigio_cleanup); + /* * Overrides for Emacs so that we follow Linus's tabbing style. * Emacs will notice this stuff at the end of the file and automatically diff --git a/arch/um/kernel/sigio_user.c b/arch/um/kernel/sigio_user.c index f7b18e157d3..9bef9413cb5 100644 --- a/arch/um/kernel/sigio_user.c +++ b/arch/um/kernel/sigio_user.c @@ -1,4 +1,4 @@ -/* +/* * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) * Licensed under the GPL */ @@ -20,127 +20,6 @@ #include "sigio.h" #include "os.h" -/* Changed during early boot */ -int pty_output_sigio = 0; -int pty_close_sigio = 0; - -/* Used as a flag during SIGIO testing early in boot */ -static volatile int got_sigio = 0; - -void __init handler(int sig) -{ - got_sigio = 1; -} - -struct openpty_arg { - int master; - int slave; - int err; -}; - -static void openpty_cb(void *arg) -{ - struct openpty_arg *info = arg; - - info->err = 0; - if(openpty(&info->master, &info->slave, NULL, NULL, NULL)) - info->err = -errno; -} - -void __init check_one_sigio(void (*proc)(int, int)) -{ - struct sigaction old, new; - struct openpty_arg pty = { .master = -1, .slave = -1 }; - int master, slave, err; - - initial_thread_cb(openpty_cb, &pty); - if(pty.err){ - printk("openpty failed, errno = %d\n", -pty.err); - return; - } - - master = pty.master; - slave = pty.slave; - - if((master == -1) || (slave == -1)){ - printk("openpty failed to allocate a pty\n"); - return; - } - - /* Not now, but complain so we now where we failed. */ - err = raw(master); - if (err < 0) - panic("check_sigio : __raw failed, errno = %d\n", -err); - - err = os_sigio_async(master, slave); - if(err < 0) - panic("tty_fds : sigio_async failed, err = %d\n", -err); - - if(sigaction(SIGIO, NULL, &old) < 0) - panic("check_sigio : sigaction 1 failed, errno = %d\n", errno); - new = old; - new.sa_handler = handler; - if(sigaction(SIGIO, &new, NULL) < 0) - panic("check_sigio : sigaction 2 failed, errno = %d\n", errno); - - got_sigio = 0; - (*proc)(master, slave); - - os_close_file(master); - os_close_file(slave); - - if(sigaction(SIGIO, &old, NULL) < 0) - panic("check_sigio : sigaction 3 failed, errno = %d\n", errno); -} - -static void tty_output(int master, int slave) -{ - int n; - char buf[512]; - - printk("Checking that host ptys support output SIGIO..."); - - memset(buf, 0, sizeof(buf)); - - while(os_write_file(master, buf, sizeof(buf)) > 0) ; - if(errno != EAGAIN) - panic("check_sigio : write failed, errno = %d\n", errno); - while(((n = os_read_file(slave, buf, sizeof(buf))) > 0) && !got_sigio) ; - - if (got_sigio) { - printk("Yes\n"); - pty_output_sigio = 1; - } else if (n == -EAGAIN) { - printk("No, enabling workaround\n"); - } else { - panic("check_sigio : read failed, err = %d\n", n); - } -} - -static void tty_close(int master, int slave) -{ - printk("Checking that host ptys support SIGIO on close..."); - - os_close_file(slave); - if(got_sigio){ - printk("Yes\n"); - pty_close_sigio = 1; - } - else printk("No, enabling workaround\n"); -} - -void __init check_sigio(void) -{ - if((os_access("/dev/ptmx", OS_ACC_R_OK) < 0) && - (os_access("/dev/ptyp0", OS_ACC_R_OK) < 0)){ - printk("No pseudo-terminals available - skipping pty SIGIO " - "check\n"); - return; - } - check_one_sigio(tty_output); - check_one_sigio(tty_close); -} - /* Protected by sigio_lock(), also used by sigio_cleanup, which is an * exitcall. */ @@ -267,10 +146,10 @@ static void update_thread(void) if(write_sigio_pid != -1) os_kill_process(write_sigio_pid, 1); write_sigio_pid = -1; - os_close_file(sigio_private[0]); - os_close_file(sigio_private[1]); - os_close_file(write_sigio_fds[0]); - os_close_file(write_sigio_fds[1]); + close(sigio_private[0]); + close(sigio_private[1]); + close(write_sigio_fds[0]); + close(write_sigio_fds[1]); /* Critical section end */ set_signals(flags); } @@ -428,39 +307,18 @@ void write_sigio_workaround(void) out_free: kfree(p); out_close2: - os_close_file(l_sigio_private[0]); - os_close_file(l_sigio_private[1]); + close(l_sigio_private[0]); + close(l_sigio_private[1]); out_close1: - os_close_file(l_write_sigio_fds[0]); - os_close_file(l_write_sigio_fds[1]); + close(l_write_sigio_fds[0]); + close(l_write_sigio_fds[1]); return; } -int read_sigio_fd(int fd) -{ - int n; - char c; - - n = os_read_file(fd, &c, sizeof(c)); - if(n != sizeof(c)){ - if(n < 0) { - printk("read_sigio_fd - read failed, err = %d\n", -n); - return(n); - } - else { - printk("read_sigio_fd - short read, bytes = %d\n", n); - return(-EIO); - } - } - return(n); -} - -static void sigio_cleanup(void) +void sigio_cleanup(void) { if (write_sigio_pid != -1) { os_kill_process(write_sigio_pid, 1); write_sigio_pid = -1; } } - -__uml_exitcall(sigio_cleanup); diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c index 0c5b9dcfbe2..bb1c87211ac 100644 --- a/arch/um/kernel/um_arch.c +++ b/arch/um/kernel/um_arch.c @@ -487,8 +487,7 @@ void __init setup_arch(char **cmdline_p) void __init check_bugs(void) { arch_check_bugs(); - check_sigio(); - check_devanon(); + os_check_bugs(); } void apply_alternatives(struct alt_instr *start, struct alt_instr *end) diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c index 829d6b0d8b0..32753131f8d 100644 --- a/arch/um/os-Linux/start_up.c +++ b/arch/um/os-Linux/start_up.c @@ -3,6 +3,7 @@ * Licensed under the GPL */ +#include #include #include #include @@ -539,3 +540,130 @@ int __init parse_iomem(char *str, int *add) return(1); } + +/* Changed during early boot */ +int pty_output_sigio = 0; +int pty_close_sigio = 0; + +/* Used as a flag during SIGIO testing early in boot */ +static volatile int got_sigio = 0; + +static void __init handler(int sig) +{ + got_sigio = 1; +} + +struct openpty_arg { + int master; + int slave; + int err; +}; + +static void openpty_cb(void *arg) +{ + struct openpty_arg *info = arg; + + info->err = 0; + if(openpty(&info->master, &info->slave, NULL, NULL, NULL)) + info->err = -errno; +} + +static void __init check_one_sigio(void (*proc)(int, int)) +{ + struct sigaction old, new; + struct openpty_arg pty = { .master = -1, .slave = -1 }; + int master, slave, err; + + initial_thread_cb(openpty_cb, &pty); + if(pty.err){ + printk("openpty failed, errno = %d\n", -pty.err); + return; + } + + master = pty.master; + slave = pty.slave; + + if((master == -1) || (slave == -1)){ + printk("openpty failed to allocate a pty\n"); + return; + } + + /* Not now, but complain so we now where we failed. */ + err = raw(master); + if (err < 0) + panic("check_sigio : __raw failed, errno = %d\n", -err); + + err = os_sigio_async(master, slave); + if(err < 0) + panic("tty_fds : sigio_async failed, err = %d\n", -err); + + if(sigaction(SIGIO, NULL, &old) < 0) + panic("check_sigio : sigaction 1 failed, errno = %d\n", errno); + new = old; + new.sa_handler = handler; + if(sigaction(SIGIO, &new, NULL) < 0) + panic("check_sigio : sigaction 2 failed, errno = %d\n", errno); + + got_sigio = 0; + (*proc)(master, slave); + + close(master); + close(slave); + + if(sigaction(SIGIO, &old, NULL) < 0) + panic("check_sigio : sigaction 3 failed, errno = %d\n", errno); +} + +static void tty_output(int master, int slave) +{ + int n; + char buf[512]; + + printk("Checking that host ptys support output SIGIO..."); + + memset(buf, 0, sizeof(buf)); + + while(os_write_file(master, buf, sizeof(buf)) > 0) ; + if(errno != EAGAIN) + panic("check_sigio : write failed, errno = %d\n", errno); + while(((n = os_read_file(slave, buf, sizeof(buf))) > 0) && !got_sigio) ; + + if(got_sigio){ + printk("Yes\n"); + pty_output_sigio = 1; + } + else if(n == -EAGAIN) printk("No, enabling workaround\n"); + else panic("check_sigio : read failed, err = %d\n", n); +} + +static void tty_close(int master, int slave) +{ + printk("Checking that host ptys support SIGIO on close..."); + + close(slave); + if(got_sigio){ + printk("Yes\n"); + pty_close_sigio = 1; + } + else printk("No, enabling workaround\n"); +} + +void __init check_sigio(void) +{ + if((os_access("/dev/ptmx", OS_ACC_R_OK) < 0) && + (os_access("/dev/ptyp0", OS_ACC_R_OK) < 0)){ + printk("No pseudo-terminals available - skipping pty SIGIO " + "check\n"); + return; + } + check_one_sigio(tty_output); + check_one_sigio(tty_close); +} + +void os_check_bugs(void) +{ + check_ptrace(); + check_sigio(); + check_devanon(); +} + -- cgit v1.2.3-18-g5258 From f206aabb035318ac4bafbf0b87798335de3634df Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Mon, 27 Mar 2006 01:14:33 -0800 Subject: [PATCH] uml: move sigio_user.c to os-Linux/sigio.c The serial UML OS-abstraction layer patch (um/kernel dir). This moves sigio_user.c to os-Linux dir Signed-off-by: Gennady Sharapov Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/include/os.h | 5 + arch/um/include/sigio.h | 2 - arch/um/include/user_util.h | 1 - arch/um/kernel/Makefile | 2 +- arch/um/kernel/sigio_user.c | 324 -------------------------------------------- arch/um/os-Linux/Makefile | 9 +- arch/um/os-Linux/sigio.c | 324 ++++++++++++++++++++++++++++++++++++++++++++ 7 files changed, 335 insertions(+), 332 deletions(-) delete mode 100644 arch/um/kernel/sigio_user.c create mode 100644 arch/um/os-Linux/sigio.c (limited to 'arch') diff --git a/arch/um/include/os.h b/arch/um/include/os.h index 6d865d4eade..53dee8d3cdc 100644 --- a/arch/um/include/os.h +++ b/arch/um/include/os.h @@ -311,4 +311,9 @@ extern void os_set_pollfd(int i, int fd); extern void os_set_ioignore(void); extern void init_irq_signals(int on_sigstack); +/* sigio.c */ +extern void write_sigio_workaround(void); +extern int add_sigio_fd(int fd, int read); +extern int ignore_sigio_fd(int fd); + #endif diff --git a/arch/um/include/sigio.h b/arch/um/include/sigio.h index 1432fcfb321..fe99ea163c2 100644 --- a/arch/um/include/sigio.h +++ b/arch/um/include/sigio.h @@ -8,8 +8,6 @@ extern int write_sigio_irq(int fd); extern int register_sigio_fd(int fd); -extern int add_sigio_fd(int fd, int read); -extern int ignore_sigio_fd(int fd); extern void sigio_lock(void); extern void sigio_unlock(void); diff --git a/arch/um/include/user_util.h b/arch/um/include/user_util.h index a6f1f176cf8..992a7e1e0fc 100644 --- a/arch/um/include/user_util.h +++ b/arch/um/include/user_util.h @@ -58,7 +58,6 @@ extern int attach(int pid); extern void kill_child_dead(int pid); extern int cont(int pid); extern void check_sigio(void); -extern void write_sigio_workaround(void); extern void arch_check_bugs(void); extern int cpu_feature(char *what, char *buf, int len); extern int arch_handle_signal(int sig, union uml_pt_regs *regs); diff --git a/arch/um/kernel/Makefile b/arch/um/kernel/Makefile index 8458c30a626..ac5afaa0306 100644 --- a/arch/um/kernel/Makefile +++ b/arch/um/kernel/Makefile @@ -8,7 +8,7 @@ clean-files := obj-y = config.o exec_kern.o exitcode.o \ init_task.o irq.o ksyms.o mem.o physmem.o \ - process_kern.o ptrace.o reboot.o resource.o sigio_user.o sigio_kern.o \ + process_kern.o ptrace.o reboot.o resource.o sigio_kern.o \ signal_kern.o smp.o syscall_kern.o sysrq.o \ time_kern.o tlb.o trap_kern.o uaccess.o um_arch.o umid.o diff --git a/arch/um/kernel/sigio_user.c b/arch/um/kernel/sigio_user.c deleted file mode 100644 index 9bef9413cb5..00000000000 --- a/arch/um/kernel/sigio_user.c +++ /dev/null @@ -1,324 +0,0 @@ -/* - * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) - * Licensed under the GPL - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "init.h" -#include "user.h" -#include "kern_util.h" -#include "user_util.h" -#include "sigio.h" -#include "os.h" - -/* Protected by sigio_lock(), also used by sigio_cleanup, which is an - * exitcall. - */ -static int write_sigio_pid = -1; - -/* These arrays are initialized before the sigio thread is started, and - * the descriptors closed after it is killed. So, it can't see them change. - * On the UML side, they are changed under the sigio_lock. - */ -static int write_sigio_fds[2] = { -1, -1 }; -static int sigio_private[2] = { -1, -1 }; - -struct pollfds { - struct pollfd *poll; - int size; - int used; -}; - -/* Protected by sigio_lock(). Used by the sigio thread, but the UML thread - * synchronizes with it. - */ -struct pollfds current_poll = { - .poll = NULL, - .size = 0, - .used = 0 -}; - -struct pollfds next_poll = { - .poll = NULL, - .size = 0, - .used = 0 -}; - -static int write_sigio_thread(void *unused) -{ - struct pollfds *fds, tmp; - struct pollfd *p; - int i, n, respond_fd; - char c; - - signal(SIGWINCH, SIG_IGN); - fds = ¤t_poll; - while(1){ - n = poll(fds->poll, fds->used, -1); - if(n < 0){ - if(errno == EINTR) continue; - printk("write_sigio_thread : poll returned %d, " - "errno = %d\n", n, errno); - } - for(i = 0; i < fds->used; i++){ - p = &fds->poll[i]; - if(p->revents == 0) continue; - if(p->fd == sigio_private[1]){ - n = os_read_file(sigio_private[1], &c, sizeof(c)); - if(n != sizeof(c)) - printk("write_sigio_thread : " - "read failed, err = %d\n", -n); - tmp = current_poll; - current_poll = next_poll; - next_poll = tmp; - respond_fd = sigio_private[1]; - } - else { - respond_fd = write_sigio_fds[1]; - fds->used--; - memmove(&fds->poll[i], &fds->poll[i + 1], - (fds->used - i) * sizeof(*fds->poll)); - } - - n = os_write_file(respond_fd, &c, sizeof(c)); - if(n != sizeof(c)) - printk("write_sigio_thread : write failed, " - "err = %d\n", -n); - } - } - - return 0; -} - -static int need_poll(int n) -{ - if(n <= next_poll.size){ - next_poll.used = n; - return(0); - } - kfree(next_poll.poll); - next_poll.poll = um_kmalloc_atomic(n * sizeof(struct pollfd)); - if(next_poll.poll == NULL){ - printk("need_poll : failed to allocate new pollfds\n"); - next_poll.size = 0; - next_poll.used = 0; - return(-1); - } - next_poll.size = n; - next_poll.used = n; - return(0); -} - -/* Must be called with sigio_lock held, because it's needed by the marked - * critical section. */ -static void update_thread(void) -{ - unsigned long flags; - int n; - char c; - - flags = set_signals(0); - n = os_write_file(sigio_private[0], &c, sizeof(c)); - if(n != sizeof(c)){ - printk("update_thread : write failed, err = %d\n", -n); - goto fail; - } - - n = os_read_file(sigio_private[0], &c, sizeof(c)); - if(n != sizeof(c)){ - printk("update_thread : read failed, err = %d\n", -n); - goto fail; - } - - set_signals(flags); - return; - fail: - /* Critical section start */ - if(write_sigio_pid != -1) - os_kill_process(write_sigio_pid, 1); - write_sigio_pid = -1; - close(sigio_private[0]); - close(sigio_private[1]); - close(write_sigio_fds[0]); - close(write_sigio_fds[1]); - /* Critical section end */ - set_signals(flags); -} - -int add_sigio_fd(int fd, int read) -{ - int err = 0, i, n, events; - - sigio_lock(); - for(i = 0; i < current_poll.used; i++){ - if(current_poll.poll[i].fd == fd) - goto out; - } - - n = current_poll.used + 1; - err = need_poll(n); - if(err) - goto out; - - for(i = 0; i < current_poll.used; i++) - next_poll.poll[i] = current_poll.poll[i]; - - if(read) events = POLLIN; - else events = POLLOUT; - - next_poll.poll[n - 1] = ((struct pollfd) { .fd = fd, - .events = events, - .revents = 0 }); - update_thread(); - out: - sigio_unlock(); - return(err); -} - -int ignore_sigio_fd(int fd) -{ - struct pollfd *p; - int err = 0, i, n = 0; - - sigio_lock(); - for(i = 0; i < current_poll.used; i++){ - if(current_poll.poll[i].fd == fd) break; - } - if(i == current_poll.used) - goto out; - - err = need_poll(current_poll.used - 1); - if(err) - goto out; - - for(i = 0; i < current_poll.used; i++){ - p = ¤t_poll.poll[i]; - if(p->fd != fd) next_poll.poll[n++] = current_poll.poll[i]; - } - if(n == i){ - printk("ignore_sigio_fd : fd %d not found\n", fd); - err = -1; - goto out; - } - - update_thread(); - out: - sigio_unlock(); - return(err); -} - -static struct pollfd* setup_initial_poll(int fd) -{ - struct pollfd *p; - - p = um_kmalloc(sizeof(struct pollfd)); - if (p == NULL) { - printk("setup_initial_poll : failed to allocate poll\n"); - return NULL; - } - *p = ((struct pollfd) { .fd = fd, - .events = POLLIN, - .revents = 0 }); - return p; -} - -void write_sigio_workaround(void) -{ - unsigned long stack; - struct pollfd *p; - int err; - int l_write_sigio_fds[2]; - int l_sigio_private[2]; - int l_write_sigio_pid; - - /* We call this *tons* of times - and most ones we must just fail. */ - sigio_lock(); - l_write_sigio_pid = write_sigio_pid; - sigio_unlock(); - - if (l_write_sigio_pid != -1) - return; - - err = os_pipe(l_write_sigio_fds, 1, 1); - if(err < 0){ - printk("write_sigio_workaround - os_pipe 1 failed, " - "err = %d\n", -err); - return; - } - err = os_pipe(l_sigio_private, 1, 1); - if(err < 0){ - printk("write_sigio_workaround - os_pipe 1 failed, " - "err = %d\n", -err); - goto out_close1; - } - - p = setup_initial_poll(l_sigio_private[1]); - if(!p) - goto out_close2; - - sigio_lock(); - - /* Did we race? Don't try to optimize this, please, it's not so likely - * to happen, and no more than once at the boot. */ - if(write_sigio_pid != -1) - goto out_unlock; - - write_sigio_pid = run_helper_thread(write_sigio_thread, NULL, - CLONE_FILES | CLONE_VM, &stack, 0); - - if (write_sigio_pid < 0) - goto out_clear; - - if (write_sigio_irq(l_write_sigio_fds[0])) - goto out_kill; - - /* Success, finally. */ - memcpy(write_sigio_fds, l_write_sigio_fds, sizeof(l_write_sigio_fds)); - memcpy(sigio_private, l_sigio_private, sizeof(l_sigio_private)); - - current_poll = ((struct pollfds) { .poll = p, - .used = 1, - .size = 1 }); - - sigio_unlock(); - return; - - out_kill: - l_write_sigio_pid = write_sigio_pid; - write_sigio_pid = -1; - sigio_unlock(); - /* Going to call waitpid, avoid holding the lock. */ - os_kill_process(l_write_sigio_pid, 1); - goto out_free; - - out_clear: - write_sigio_pid = -1; - out_unlock: - sigio_unlock(); - out_free: - kfree(p); - out_close2: - close(l_sigio_private[0]); - close(l_sigio_private[1]); - out_close1: - close(l_write_sigio_fds[0]); - close(l_write_sigio_fds[1]); - return; -} - -void sigio_cleanup(void) -{ - if (write_sigio_pid != -1) { - os_kill_process(write_sigio_pid, 1); - write_sigio_pid = -1; - } -} diff --git a/arch/um/os-Linux/Makefile b/arch/um/os-Linux/Makefile index 73d3d837ed6..c3d56c2935c 100644 --- a/arch/um/os-Linux/Makefile +++ b/arch/um/os-Linux/Makefile @@ -3,14 +3,15 @@ # Licensed under the GPL # -obj-y = aio.o elf_aux.o file.o helper.o irq.o main.o mem.o process.o signal.o \ - start_up.o time.o trap.o tt.o tty.o uaccess.o umid.o user_syms.o \ - util.o drivers/ sys-$(SUBARCH)/ +obj-y = aio.o elf_aux.o file.o helper.o irq.o main.o mem.o process.o sigio.o \ + signal.o start_up.o time.o trap.o tt.o tty.o uaccess.o umid.o \ + user_syms.o util.o drivers/ sys-$(SUBARCH)/ obj-$(CONFIG_MODE_SKAS) += skas/ USER_OBJS := aio.o elf_aux.o file.o helper.o irq.o main.o mem.o process.o \ - signal.o start_up.o time.o trap.o tt.o tty.o uaccess.o umid.o util.o + sigio.o signal.o start_up.o time.o trap.o tt.o tty.o uaccess.o umid.o \ + util.o elf_aux.o: $(ARCH_DIR)/kernel-offsets.h CFLAGS_elf_aux.o += -I$(objtree)/arch/um diff --git a/arch/um/os-Linux/sigio.c b/arch/um/os-Linux/sigio.c new file mode 100644 index 00000000000..7604c404c4c --- /dev/null +++ b/arch/um/os-Linux/sigio.c @@ -0,0 +1,324 @@ +/* + * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "init.h" +#include "user.h" +#include "kern_util.h" +#include "user_util.h" +#include "sigio.h" +#include "os.h" + +/* Protected by sigio_lock(), also used by sigio_cleanup, which is an + * exitcall. + */ +static int write_sigio_pid = -1; + +/* These arrays are initialized before the sigio thread is started, and + * the descriptors closed after it is killed. So, it can't see them change. + * On the UML side, they are changed under the sigio_lock. + */ +static int write_sigio_fds[2] = { -1, -1 }; +static int sigio_private[2] = { -1, -1 }; + +struct pollfds { + struct pollfd *poll; + int size; + int used; +}; + +/* Protected by sigio_lock(). Used by the sigio thread, but the UML thread + * synchronizes with it. + */ +struct pollfds current_poll = { + .poll = NULL, + .size = 0, + .used = 0 +}; + +struct pollfds next_poll = { + .poll = NULL, + .size = 0, + .used = 0 +}; + +static int write_sigio_thread(void *unused) +{ + struct pollfds *fds, tmp; + struct pollfd *p; + int i, n, respond_fd; + char c; + + signal(SIGWINCH, SIG_IGN); + fds = ¤t_poll; + while(1){ + n = poll(fds->poll, fds->used, -1); + if(n < 0){ + if(errno == EINTR) continue; + printk("write_sigio_thread : poll returned %d, " + "errno = %d\n", n, errno); + } + for(i = 0; i < fds->used; i++){ + p = &fds->poll[i]; + if(p->revents == 0) continue; + if(p->fd == sigio_private[1]){ + n = os_read_file(sigio_private[1], &c, sizeof(c)); + if(n != sizeof(c)) + printk("write_sigio_thread : " + "read failed, err = %d\n", -n); + tmp = current_poll; + current_poll = next_poll; + next_poll = tmp; + respond_fd = sigio_private[1]; + } + else { + respond_fd = write_sigio_fds[1]; + fds->used--; + memmove(&fds->poll[i], &fds->poll[i + 1], + (fds->used - i) * sizeof(*fds->poll)); + } + + n = os_write_file(respond_fd, &c, sizeof(c)); + if(n != sizeof(c)) + printk("write_sigio_thread : write failed, " + "err = %d\n", -n); + } + } + + return 0; +} + +static int need_poll(int n) +{ + if(n <= next_poll.size){ + next_poll.used = n; + return(0); + } + kfree(next_poll.poll); + next_poll.poll = um_kmalloc_atomic(n * sizeof(struct pollfd)); + if(next_poll.poll == NULL){ + printk("need_poll : failed to allocate new pollfds\n"); + next_poll.size = 0; + next_poll.used = 0; + return(-1); + } + next_poll.size = n; + next_poll.used = n; + return(0); +} + +/* Must be called with sigio_lock held, because it's needed by the marked + * critical section. */ +static void update_thread(void) +{ + unsigned long flags; + int n; + char c; + + flags = set_signals(0); + n = os_write_file(sigio_private[0], &c, sizeof(c)); + if(n != sizeof(c)){ + printk("update_thread : write failed, err = %d\n", -n); + goto fail; + } + + n = os_read_file(sigio_private[0], &c, sizeof(c)); + if(n != sizeof(c)){ + printk("update_thread : read failed, err = %d\n", -n); + goto fail; + } + + set_signals(flags); + return; + fail: + /* Critical section start */ + if(write_sigio_pid != -1) + os_kill_process(write_sigio_pid, 1); + write_sigio_pid = -1; + close(sigio_private[0]); + close(sigio_private[1]); + close(write_sigio_fds[0]); + close(write_sigio_fds[1]); + /* Critical section end */ + set_signals(flags); +} + +int add_sigio_fd(int fd, int read) +{ + int err = 0, i, n, events; + + sigio_lock(); + for(i = 0; i < current_poll.used; i++){ + if(current_poll.poll[i].fd == fd) + goto out; + } + + n = current_poll.used + 1; + err = need_poll(n); + if(err) + goto out; + + for(i = 0; i < current_poll.used; i++) + next_poll.poll[i] = current_poll.poll[i]; + + if(read) events = POLLIN; + else events = POLLOUT; + + next_poll.poll[n - 1] = ((struct pollfd) { .fd = fd, + .events = events, + .revents = 0 }); + update_thread(); + out: + sigio_unlock(); + return(err); +} + +int ignore_sigio_fd(int fd) +{ + struct pollfd *p; + int err = 0, i, n = 0; + + sigio_lock(); + for(i = 0; i < current_poll.used; i++){ + if(current_poll.poll[i].fd == fd) break; + } + if(i == current_poll.used) + goto out; + + err = need_poll(current_poll.used - 1); + if(err) + goto out; + + for(i = 0; i < current_poll.used; i++){ + p = ¤t_poll.poll[i]; + if(p->fd != fd) next_poll.poll[n++] = current_poll.poll[i]; + } + if(n == i){ + printk("ignore_sigio_fd : fd %d not found\n", fd); + err = -1; + goto out; + } + + update_thread(); + out: + sigio_unlock(); + return(err); +} + +static struct pollfd *setup_initial_poll(int fd) +{ + struct pollfd *p; + + p = um_kmalloc(sizeof(struct pollfd)); + if (p == NULL) { + printk("setup_initial_poll : failed to allocate poll\n"); + return NULL; + } + *p = ((struct pollfd) { .fd = fd, + .events = POLLIN, + .revents = 0 }); + return p; +} + +void write_sigio_workaround(void) +{ + unsigned long stack; + struct pollfd *p; + int err; + int l_write_sigio_fds[2]; + int l_sigio_private[2]; + int l_write_sigio_pid; + + /* We call this *tons* of times - and most ones we must just fail. */ + sigio_lock(); + l_write_sigio_pid = write_sigio_pid; + sigio_unlock(); + + if (l_write_sigio_pid != -1) + return; + + err = os_pipe(l_write_sigio_fds, 1, 1); + if(err < 0){ + printk("write_sigio_workaround - os_pipe 1 failed, " + "err = %d\n", -err); + return; + } + err = os_pipe(l_sigio_private, 1, 1); + if(err < 0){ + printk("write_sigio_workaround - os_pipe 2 failed, " + "err = %d\n", -err); + goto out_close1; + } + + p = setup_initial_poll(l_sigio_private[1]); + if(!p) + goto out_close2; + + sigio_lock(); + + /* Did we race? Don't try to optimize this, please, it's not so likely + * to happen, and no more than once at the boot. */ + if(write_sigio_pid != -1) + goto out_unlock; + + write_sigio_pid = run_helper_thread(write_sigio_thread, NULL, + CLONE_FILES | CLONE_VM, &stack, 0); + + if (write_sigio_pid < 0) + goto out_clear; + + if (write_sigio_irq(l_write_sigio_fds[0])) + goto out_kill; + + /* Success, finally. */ + memcpy(write_sigio_fds, l_write_sigio_fds, sizeof(l_write_sigio_fds)); + memcpy(sigio_private, l_sigio_private, sizeof(l_sigio_private)); + + current_poll = ((struct pollfds) { .poll = p, + .used = 1, + .size = 1 }); + + sigio_unlock(); + return; + + out_kill: + l_write_sigio_pid = write_sigio_pid; + write_sigio_pid = -1; + sigio_unlock(); + /* Going to call waitpid, avoid holding the lock. */ + os_kill_process(l_write_sigio_pid, 1); + goto out_free; + + out_clear: + write_sigio_pid = -1; + out_unlock: + sigio_unlock(); + out_free: + kfree(p); + out_close2: + close(l_sigio_private[0]); + close(l_sigio_private[1]); + out_close1: + close(l_write_sigio_fds[0]); + close(l_write_sigio_fds[1]); + return; +} + +void sigio_cleanup(void) +{ + if(write_sigio_pid != -1){ + os_kill_process(write_sigio_pid, 1); + write_sigio_pid = -1; + } +} -- cgit v1.2.3-18-g5258 From 81efcd3300754462537ffac60336158b2f773b4e Mon Sep 17 00:00:00 2001 From: Bodo Stroesser Date: Mon, 27 Mar 2006 01:14:34 -0800 Subject: [PATCH] uml: more carefully test whether we are in a system call For security reasons, UML in is_syscall() needs to have access to code in vsyscall-page. The current implementation grants this access by explicitly allowing access to vsyscall in access_ok_skas(). With this change, copy_from_user() may be used to read the code. Ptrace access to vsyscall-page for debugging already was implemented in get_user_pages() by mainline. In i386, copy_from_user can't access vsyscall-page, but returns EFAULT. To make UML behave as i386 does, I changed is_syscall to use access_process_vm(current) to read the code from vsyscall-page. This doesn't hurt security, but simplifies the code and prepares implementation of stub-vmas. Signed-off-by: Bodo Stroesser Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/sys-i386/ptrace.c | 15 ++++++++++++--- arch/um/sys-x86_64/ptrace.c | 22 +++++++++++++++++++++- 2 files changed, 33 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/um/sys-i386/ptrace.c b/arch/um/sys-i386/ptrace.c index e839ce65ad2..8032a105949 100644 --- a/arch/um/sys-i386/ptrace.c +++ b/arch/um/sys-i386/ptrace.c @@ -6,6 +6,7 @@ #include #include #include "linux/sched.h" +#include "linux/mm.h" #include "asm/elf.h" #include "asm/ptrace.h" #include "asm/uaccess.h" @@ -26,9 +27,17 @@ int is_syscall(unsigned long addr) n = copy_from_user(&instr, (void __user *) addr, sizeof(instr)); if(n){ - printk("is_syscall : failed to read instruction from 0x%lx\n", - addr); - return(0); + /* access_process_vm() grants access to vsyscall and stub, + * while copy_from_user doesn't. Maybe access_process_vm is + * slow, but that doesn't matter, since it will be called only + * in case of singlestepping, if copy_from_user failed. + */ + n = access_process_vm(current, addr, &instr, sizeof(instr), 0); + if(n != sizeof(instr)) { + printk("is_syscall : failed to read instruction from " + "0x%lx\n", addr); + return(1); + } } /* int 0x80 or sysenter */ return((instr == 0x80cd) || (instr == 0x340f)); diff --git a/arch/um/sys-x86_64/ptrace.c b/arch/um/sys-x86_64/ptrace.c index 74eee5c7c6d..147bbf05cbc 100644 --- a/arch/um/sys-x86_64/ptrace.c +++ b/arch/um/sys-x86_64/ptrace.c @@ -8,6 +8,7 @@ #include #include #include +#include #include #include @@ -136,9 +137,28 @@ void arch_switch(void) */ } +/* XXX Mostly copied from sys-i386 */ int is_syscall(unsigned long addr) { - panic("is_syscall"); + unsigned short instr; + int n; + + n = copy_from_user(&instr, (void __user *) addr, sizeof(instr)); + if(n){ + /* access_process_vm() grants access to vsyscall and stub, + * while copy_from_user doesn't. Maybe access_process_vm is + * slow, but that doesn't matter, since it will be called only + * in case of singlestepping, if copy_from_user failed. + */ + n = access_process_vm(current, addr, &instr, sizeof(instr), 0); + if(n != sizeof(instr)) { + printk("is_syscall : failed to read instruction from " + "0x%lx\n", addr); + return(1); + } + } + /* sysenter */ + return(instr == 0x050f); } int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpu ) -- cgit v1.2.3-18-g5258 From c554f899b6747c9d8035bf91864d89b337ceb411 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Mon, 27 Mar 2006 01:14:36 -0800 Subject: [PATCH] uml: move tty logging to os-Linux The serial UML OS-abstraction layer patch (um/kernel dir). This moves all systemcalls from tty_log.c file under os-Linux dir Signed-off-by: Gennady Sharapov Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/kernel/Makefile | 5 +- arch/um/kernel/exec_kern.c | 2 - arch/um/kernel/tty_log.c | 230 --------------------------------------------- arch/um/os-Linux/Makefile | 8 +- arch/um/os-Linux/tty_log.c | 218 ++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 224 insertions(+), 239 deletions(-) delete mode 100644 arch/um/kernel/tty_log.c create mode 100644 arch/um/os-Linux/tty_log.c (limited to 'arch') diff --git a/arch/um/kernel/Makefile b/arch/um/kernel/Makefile index ac5afaa0306..fe08971b64c 100644 --- a/arch/um/kernel/Makefile +++ b/arch/um/kernel/Makefile @@ -15,15 +15,12 @@ obj-y = config.o exec_kern.o exitcode.o \ obj-$(CONFIG_BLK_DEV_INITRD) += initrd.o obj-$(CONFIG_GPROF) += gprof_syms.o obj-$(CONFIG_GCOV) += gmon_syms.o -obj-$(CONFIG_TTY_LOG) += tty_log.o obj-$(CONFIG_SYSCALL_DEBUG) += syscall.o obj-$(CONFIG_MODE_TT) += tt/ obj-$(CONFIG_MODE_SKAS) += skas/ -user-objs-$(CONFIG_TTY_LOG) += tty_log.o - -USER_OBJS := $(user-objs-y) config.o tty_log.o +USER_OBJS := config.o include arch/um/scripts/Makefile.rules diff --git a/arch/um/kernel/exec_kern.c b/arch/um/kernel/exec_kern.c index c264e1c05ab..1ca84319317 100644 --- a/arch/um/kernel/exec_kern.c +++ b/arch/um/kernel/exec_kern.c @@ -30,8 +30,6 @@ void start_thread(struct pt_regs *regs, unsigned long eip, unsigned long esp) CHOOSE_MODE_PROC(start_thread_tt, start_thread_skas, regs, eip, esp); } -extern void log_exec(char **argv, void *tty); - static long execve1(char *file, char __user * __user *argv, char __user *__user *env) { diff --git a/arch/um/kernel/tty_log.c b/arch/um/kernel/tty_log.c deleted file mode 100644 index 9ada656f68c..00000000000 --- a/arch/um/kernel/tty_log.c +++ /dev/null @@ -1,230 +0,0 @@ -/* - * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) and - * geoffrey hing - * Licensed under the GPL - */ - -#include -#include -#include -#include -#include -#include -#include "init.h" -#include "user.h" -#include "kern_util.h" -#include "os.h" - -#define TTY_LOG_DIR "./" - -/* Set early in boot and then unchanged */ -static char *tty_log_dir = TTY_LOG_DIR; -static int tty_log_fd = -1; - -#define TTY_LOG_OPEN 1 -#define TTY_LOG_CLOSE 2 -#define TTY_LOG_WRITE 3 -#define TTY_LOG_EXEC 4 - -#define TTY_READ 1 -#define TTY_WRITE 2 - -struct tty_log_buf { - int what; - unsigned long tty; - int len; - int direction; - unsigned long sec; - unsigned long usec; -}; - -int open_tty_log(void *tty, void *current_tty) -{ - struct timeval tv; - struct tty_log_buf data; - char buf[strlen(tty_log_dir) + sizeof("01234567890-01234567\0")]; - int fd; - - gettimeofday(&tv, NULL); - if(tty_log_fd != -1){ - data = ((struct tty_log_buf) { .what = TTY_LOG_OPEN, - .tty = (unsigned long) tty, - .len = sizeof(current_tty), - .direction = 0, - .sec = tv.tv_sec, - .usec = tv.tv_usec } ); - os_write_file(tty_log_fd, &data, sizeof(data)); - os_write_file(tty_log_fd, ¤t_tty, data.len); - return(tty_log_fd); - } - - sprintf(buf, "%s/%0u-%0u", tty_log_dir, (unsigned int) tv.tv_sec, - (unsigned int) tv.tv_usec); - - fd = os_open_file(buf, of_append(of_create(of_rdwr(OPENFLAGS()))), - 0644); - if(fd < 0){ - printk("open_tty_log : couldn't open '%s', errno = %d\n", - buf, -fd); - } - return(fd); -} - -void close_tty_log(int fd, void *tty) -{ - struct tty_log_buf data; - struct timeval tv; - - if(tty_log_fd != -1){ - gettimeofday(&tv, NULL); - data = ((struct tty_log_buf) { .what = TTY_LOG_CLOSE, - .tty = (unsigned long) tty, - .len = 0, - .direction = 0, - .sec = tv.tv_sec, - .usec = tv.tv_usec } ); - os_write_file(tty_log_fd, &data, sizeof(data)); - return; - } - os_close_file(fd); -} - -static int log_chunk(int fd, const char *buf, int len) -{ - int total = 0, try, missed, n; - char chunk[64]; - - while(len > 0){ - try = (len > sizeof(chunk)) ? sizeof(chunk) : len; - missed = copy_from_user_proc(chunk, (char *) buf, try); - try -= missed; - n = os_write_file(fd, chunk, try); - if(n != try) { - if(n < 0) - return(n); - return(-EIO); - } - if(missed != 0) - return(-EFAULT); - - len -= try; - total += try; - buf += try; - } - - return(total); -} - -int write_tty_log(int fd, const char *buf, int len, void *tty, int is_read) -{ - struct timeval tv; - struct tty_log_buf data; - int direction; - - if(fd == tty_log_fd){ - gettimeofday(&tv, NULL); - direction = is_read ? TTY_READ : TTY_WRITE; - data = ((struct tty_log_buf) { .what = TTY_LOG_WRITE, - .tty = (unsigned long) tty, - .len = len, - .direction = direction, - .sec = tv.tv_sec, - .usec = tv.tv_usec } ); - os_write_file(tty_log_fd, &data, sizeof(data)); - } - - return(log_chunk(fd, buf, len)); -} - -void log_exec(char **argv, void *tty) -{ - struct timeval tv; - struct tty_log_buf data; - char **ptr,*arg; - int len; - - if(tty_log_fd == -1) return; - - gettimeofday(&tv, NULL); - - len = 0; - for(ptr = argv; ; ptr++){ - if(copy_from_user_proc(&arg, ptr, sizeof(arg))) - return; - if(arg == NULL) break; - len += strlen_user_proc(arg); - } - - data = ((struct tty_log_buf) { .what = TTY_LOG_EXEC, - .tty = (unsigned long) tty, - .len = len, - .direction = 0, - .sec = tv.tv_sec, - .usec = tv.tv_usec } ); - os_write_file(tty_log_fd, &data, sizeof(data)); - - for(ptr = argv; ; ptr++){ - if(copy_from_user_proc(&arg, ptr, sizeof(arg))) - return; - if(arg == NULL) break; - log_chunk(tty_log_fd, arg, strlen_user_proc(arg)); - } -} - -extern void register_tty_logger(int (*opener)(void *, void *), - int (*writer)(int, const char *, int, - void *, int), - void (*closer)(int, void *)); - -static int register_logger(void) -{ - register_tty_logger(open_tty_log, write_tty_log, close_tty_log); - return(0); -} - -__uml_initcall(register_logger); - -static int __init set_tty_log_dir(char *name, int *add) -{ - tty_log_dir = name; - return 0; -} - -__uml_setup("tty_log_dir=", set_tty_log_dir, -"tty_log_dir=\n" -" This is used to specify the directory where the logs of all pty\n" -" data from this UML machine will be written.\n\n" -); - -static int __init set_tty_log_fd(char *name, int *add) -{ - char *end; - - tty_log_fd = strtoul(name, &end, 0); - if((*end != '\0') || (end == name)){ - printf("set_tty_log_fd - strtoul failed on '%s'\n", name); - tty_log_fd = -1; - } - - *add = 0; - return 0; -} - -__uml_setup("tty_log_fd=", set_tty_log_fd, -"tty_log_fd=\n" -" This is used to specify a preconfigured file descriptor to which all\n" -" tty data will be written. Preconfigure the descriptor with something\n" -" like '10>tty_log tty_log_fd=10'.\n\n" -); - - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/os-Linux/Makefile b/arch/um/os-Linux/Makefile index c3d56c2935c..1659386b42b 100644 --- a/arch/um/os-Linux/Makefile +++ b/arch/um/os-Linux/Makefile @@ -8,10 +8,12 @@ obj-y = aio.o elf_aux.o file.o helper.o irq.o main.o mem.o process.o sigio.o \ user_syms.o util.o drivers/ sys-$(SUBARCH)/ obj-$(CONFIG_MODE_SKAS) += skas/ +obj-$(CONFIG_TTY_LOG) += tty_log.o +user-objs-$(CONFIG_TTY_LOG) += tty_log.o -USER_OBJS := aio.o elf_aux.o file.o helper.o irq.o main.o mem.o process.o \ - sigio.o signal.o start_up.o time.o trap.o tt.o tty.o uaccess.o umid.o \ - util.o +USER_OBJS := $(user-objs-y) aio.o elf_aux.o file.o helper.o irq.o main.o mem.o \ + process.o sigio.o signal.o start_up.o time.o trap.o tt.o tty.o \ + uaccess.o umid.o util.o elf_aux.o: $(ARCH_DIR)/kernel-offsets.h CFLAGS_elf_aux.o += -I$(objtree)/arch/um diff --git a/arch/um/os-Linux/tty_log.c b/arch/um/os-Linux/tty_log.c new file mode 100644 index 00000000000..c6ba56c1560 --- /dev/null +++ b/arch/um/os-Linux/tty_log.c @@ -0,0 +1,218 @@ +/* + * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) and + * geoffrey hing + * Licensed under the GPL + */ + +#include +#include +#include +#include +#include +#include +#include "init.h" +#include "user.h" +#include "kern_util.h" +#include "os.h" + +#define TTY_LOG_DIR "./" + +/* Set early in boot and then unchanged */ +static char *tty_log_dir = TTY_LOG_DIR; +static int tty_log_fd = -1; + +#define TTY_LOG_OPEN 1 +#define TTY_LOG_CLOSE 2 +#define TTY_LOG_WRITE 3 +#define TTY_LOG_EXEC 4 + +#define TTY_READ 1 +#define TTY_WRITE 2 + +struct tty_log_buf { + int what; + unsigned long tty; + int len; + int direction; + unsigned long sec; + unsigned long usec; +}; + +int open_tty_log(void *tty, void *current_tty) +{ + struct timeval tv; + struct tty_log_buf data; + char buf[strlen(tty_log_dir) + sizeof("01234567890-01234567\0")]; + int fd; + + gettimeofday(&tv, NULL); + if(tty_log_fd != -1){ + data = ((struct tty_log_buf) { .what = TTY_LOG_OPEN, + .tty = (unsigned long) tty, + .len = sizeof(current_tty), + .direction = 0, + .sec = tv.tv_sec, + .usec = tv.tv_usec } ); + os_write_file(tty_log_fd, &data, sizeof(data)); + os_write_file(tty_log_fd, ¤t_tty, data.len); + return(tty_log_fd); + } + + sprintf(buf, "%s/%0u-%0u", tty_log_dir, (unsigned int) tv.tv_sec, + (unsigned int) tv.tv_usec); + + fd = os_open_file(buf, of_append(of_create(of_rdwr(OPENFLAGS()))), + 0644); + if(fd < 0){ + printk("open_tty_log : couldn't open '%s', errno = %d\n", + buf, -fd); + } + return(fd); +} + +void close_tty_log(int fd, void *tty) +{ + struct tty_log_buf data; + struct timeval tv; + + if(tty_log_fd != -1){ + gettimeofday(&tv, NULL); + data = ((struct tty_log_buf) { .what = TTY_LOG_CLOSE, + .tty = (unsigned long) tty, + .len = 0, + .direction = 0, + .sec = tv.tv_sec, + .usec = tv.tv_usec } ); + os_write_file(tty_log_fd, &data, sizeof(data)); + return; + } + os_close_file(fd); +} + +static int log_chunk(int fd, const char *buf, int len) +{ + int total = 0, try, missed, n; + char chunk[64]; + + while(len > 0){ + try = (len > sizeof(chunk)) ? sizeof(chunk) : len; + missed = copy_from_user_proc(chunk, (char *) buf, try); + try -= missed; + n = os_write_file(fd, chunk, try); + if(n != try) { + if(n < 0) + return(n); + return(-EIO); + } + if(missed != 0) + return(-EFAULT); + + len -= try; + total += try; + buf += try; + } + + return(total); +} + +int write_tty_log(int fd, const char *buf, int len, void *tty, int is_read) +{ + struct timeval tv; + struct tty_log_buf data; + int direction; + + if(fd == tty_log_fd){ + gettimeofday(&tv, NULL); + direction = is_read ? TTY_READ : TTY_WRITE; + data = ((struct tty_log_buf) { .what = TTY_LOG_WRITE, + .tty = (unsigned long) tty, + .len = len, + .direction = direction, + .sec = tv.tv_sec, + .usec = tv.tv_usec } ); + os_write_file(tty_log_fd, &data, sizeof(data)); + } + + return(log_chunk(fd, buf, len)); +} + +void log_exec(char **argv, void *tty) +{ + struct timeval tv; + struct tty_log_buf data; + char **ptr,*arg; + int len; + + if(tty_log_fd == -1) return; + + gettimeofday(&tv, NULL); + + len = 0; + for(ptr = argv; ; ptr++){ + if(copy_from_user_proc(&arg, ptr, sizeof(arg))) + return; + if(arg == NULL) break; + len += strlen_user_proc(arg); + } + + data = ((struct tty_log_buf) { .what = TTY_LOG_EXEC, + .tty = (unsigned long) tty, + .len = len, + .direction = 0, + .sec = tv.tv_sec, + .usec = tv.tv_usec } ); + os_write_file(tty_log_fd, &data, sizeof(data)); + + for(ptr = argv; ; ptr++){ + if(copy_from_user_proc(&arg, ptr, sizeof(arg))) + return; + if(arg == NULL) break; + log_chunk(tty_log_fd, arg, strlen_user_proc(arg)); + } +} + +extern void register_tty_logger(int (*opener)(void *, void *), + int (*writer)(int, const char *, int, + void *, int), + void (*closer)(int, void *)); + +static int register_logger(void) +{ + register_tty_logger(open_tty_log, write_tty_log, close_tty_log); + return(0); +} + +__uml_initcall(register_logger); + +static int __init set_tty_log_dir(char *name, int *add) +{ + tty_log_dir = name; + return 0; +} + +__uml_setup("tty_log_dir=", set_tty_log_dir, +"tty_log_dir=\n" +" This is used to specify the directory where the logs of all pty\n" +" data from this UML machine will be written.\n\n" +); + +static int __init set_tty_log_fd(char *name, int *add) +{ + char *end; + + tty_log_fd = strtoul(name, &end, 0); + if((*end != '\0') || (end == name)){ + printf("set_tty_log_fd - strtoul failed on '%s'\n", name); + tty_log_fd = -1; + } + + *add = 0; + return 0; +} + +__uml_setup("tty_log_fd=", set_tty_log_fd, +"tty_log_fd=\n" +" This is used to specify a preconfigured file descriptor to which all\n" +" tty data will be written. Preconfigure the descriptor with something\n" +" like '10>tty_log tty_log_fd=10'.\n\n" +); -- cgit v1.2.3-18-g5258 From cf9165a50aa21027d2f0eefc90476ec59ae6d2b8 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Mon, 27 Mar 2006 01:14:36 -0800 Subject: [PATCH] uml: oS header cleanups This rearranges the OS declarations by moving some declarations into os.h. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/include/os.h | 14 ++++++++++++++ arch/um/include/skas/mode-skas.h | 1 - arch/um/include/skas/skas.h | 1 - 3 files changed, 14 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/um/include/os.h b/arch/um/include/os.h index 53dee8d3cdc..d3d1bc6074e 100644 --- a/arch/um/include/os.h +++ b/arch/um/include/os.h @@ -122,6 +122,7 @@ static inline struct openflags of_cloexec(struct openflags flags) return(flags); } +/* file.c */ extern int os_stat_file(const char *file_name, struct uml_stat *buf); extern int os_stat_fd(const int fd, struct uml_stat *buf); extern int os_access(const char *file, int mode); @@ -157,6 +158,15 @@ extern int os_connect_socket(char *name); extern int os_file_type(char *file); extern int os_file_mode(char *file, struct openflags *mode_out); extern int os_lock_file(int fd, int excl); +extern void os_flush_stdout(void); +extern int os_stat_filesystem(char *path, long *bsize_out, + long long *blocks_out, long long *bfree_out, + long long *bavail_out, long long *files_out, + long long *ffree_out, void *fsid_out, + int fsid_size, long *namelen_out, + long *spare_out); +extern int os_change_dir(char *dir); +extern int os_fchange_dir(int fd); /* start_up.c */ extern void os_early_checks(void); @@ -316,4 +326,8 @@ extern void write_sigio_workaround(void); extern int add_sigio_fd(int fd, int read); extern int ignore_sigio_fd(int fd); +/* skas/trap */ +extern void sig_handler_common_skas(int sig, void *sc_ptr); +extern void user_signal(int sig, union uml_pt_regs *regs, int pid); + #endif diff --git a/arch/um/include/skas/mode-skas.h b/arch/um/include/skas/mode-skas.h index 260065cfeef..8bc6916bbbb 100644 --- a/arch/um/include/skas/mode-skas.h +++ b/arch/um/include/skas/mode-skas.h @@ -13,7 +13,6 @@ extern unsigned long exec_fp_regs[]; extern unsigned long exec_fpx_regs[]; extern int have_fpx_regs; -extern void sig_handler_common_skas(int sig, void *sc_ptr); extern void kill_off_processes_skas(void); #endif diff --git a/arch/um/include/skas/skas.h b/arch/um/include/skas/skas.h index 86357282d68..853b26f148c 100644 --- a/arch/um/include/skas/skas.h +++ b/arch/um/include/skas/skas.h @@ -17,7 +17,6 @@ extern int user_thread(unsigned long stack, int flags); extern void new_thread_proc(void *stack, void (*handler)(int sig)); extern void new_thread_handler(int sig); extern void handle_syscall(union uml_pt_regs *regs); -extern void user_signal(int sig, union uml_pt_regs *regs, int pid); extern int new_mm(unsigned long stack); extern void get_skas_faultinfo(int pid, struct faultinfo * fi); extern long execute_syscall_skas(void *r); -- cgit v1.2.3-18-g5258 From 6c29256c5703ad7c3cf62276dbc38d802a05669e Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Mon, 27 Mar 2006 01:14:37 -0800 Subject: [PATCH] uml: allow ubd devices to be shared in a cluster This adds a 'c' option to the ubd switch which turns off host file locking so that the device can be shared, as with a cluster. There's also some whitespace cleanup while I was in this file. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/ubd_kern.c | 76 ++++++++++++++++++++++++++-------------------- 1 file changed, 43 insertions(+), 33 deletions(-) (limited to 'arch') diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c index fa617e0719a..0336575d244 100644 --- a/arch/um/drivers/ubd_kern.c +++ b/arch/um/drivers/ubd_kern.c @@ -1,4 +1,4 @@ -/* +/* * Copyright (C) 2000 Jeff Dike (jdike@karaya.com) * Licensed under the GPL */ @@ -71,7 +71,7 @@ struct io_thread_req { int error; }; -extern int open_ubd_file(char *file, struct openflags *openflags, +extern int open_ubd_file(char *file, struct openflags *openflags, int shared, char **backing_file_out, int *bitmap_offset_out, unsigned long *bitmap_len_out, int *data_offset_out, int *create_cow_out); @@ -137,7 +137,7 @@ static int fake_major = MAJOR_NR; static struct gendisk *ubd_gendisk[MAX_DEV]; static struct gendisk *fake_gendisk[MAX_DEV]; - + #ifdef CONFIG_BLK_DEV_UBD_SYNC #define OPEN_FLAGS ((struct openflags) { .r = 1, .w = 1, .s = 1, .c = 0, \ .cl = 1 }) @@ -168,6 +168,7 @@ struct ubd { __u64 size; struct openflags boot_openflags; struct openflags openflags; + int shared; int no_cow; struct cow cow; struct platform_device pdev; @@ -189,6 +190,7 @@ struct ubd { .boot_openflags = OPEN_FLAGS, \ .openflags = OPEN_FLAGS, \ .no_cow = 0, \ + .shared = 0, \ .cow = DEFAULT_COW, \ } @@ -305,7 +307,7 @@ static int ubd_setup_common(char *str, int *index_out) } major = simple_strtoul(str, &end, 0); if((*end != '\0') || (end == str)){ - printk(KERN_ERR + printk(KERN_ERR "ubd_setup : didn't parse major number\n"); return(1); } @@ -316,7 +318,7 @@ static int ubd_setup_common(char *str, int *index_out) printk(KERN_ERR "Can't assign a fake major twice\n"); goto out1; } - + fake_major = major; printk(KERN_INFO "Setting extra ubd major number to %d\n", @@ -351,7 +353,7 @@ static int ubd_setup_common(char *str, int *index_out) if (index_out) *index_out = n; - for (i = 0; i < 4; i++) { + for (i = 0; i < sizeof("rscd="); i++) { switch (*str) { case 'r': flags.w = 0; @@ -362,11 +364,14 @@ static int ubd_setup_common(char *str, int *index_out) case 'd': dev->no_cow = 1; break; + case 'c': + dev->shared = 1; + break; case '=': str++; goto break_loop; default: - printk(KERN_ERR "ubd_setup : Expected '=' or flag letter (r,s or d)\n"); + printk(KERN_ERR "ubd_setup : Expected '=' or flag letter (r, s, c, or d)\n"); goto out; } str++; @@ -515,7 +520,7 @@ static void ubd_handler(void) spin_unlock(&ubd_io_lock); return; } - + ubd_finish(rq, req.error); reactivate_fd(thread_fd, UBD_IRQ); do_ubd_request(ubd_queue); @@ -532,7 +537,7 @@ static int io_pid = -1; void kill_io_thread(void) { - if(io_pid != -1) + if(io_pid != -1) os_kill_process(io_pid, 1); } @@ -567,14 +572,15 @@ static int ubd_open_dev(struct ubd *dev) create_cow = 0; create_ptr = (dev->cow.file != NULL) ? &create_cow : NULL; back_ptr = dev->no_cow ? NULL : &dev->cow.file; - dev->fd = open_ubd_file(dev->file, &dev->openflags, back_ptr, - &dev->cow.bitmap_offset, &dev->cow.bitmap_len, - &dev->cow.data_offset, create_ptr); + dev->fd = open_ubd_file(dev->file, &dev->openflags, dev->shared, + back_ptr, &dev->cow.bitmap_offset, + &dev->cow.bitmap_len, &dev->cow.data_offset, + create_ptr); if((dev->fd == -ENOENT) && create_cow){ - dev->fd = create_cow_file(dev->file, dev->cow.file, + dev->fd = create_cow_file(dev->file, dev->cow.file, dev->openflags, 1 << 9, PAGE_SIZE, - &dev->cow.bitmap_offset, + &dev->cow.bitmap_offset, &dev->cow.bitmap_len, &dev->cow.data_offset); if(dev->fd >= 0){ @@ -598,16 +604,16 @@ static int ubd_open_dev(struct ubd *dev) } flush_tlb_kernel_vm(); - err = read_cow_bitmap(dev->fd, dev->cow.bitmap, - dev->cow.bitmap_offset, + err = read_cow_bitmap(dev->fd, dev->cow.bitmap, + dev->cow.bitmap_offset, dev->cow.bitmap_len); if(err < 0) goto error; flags = dev->openflags; flags.w = 0; - err = open_ubd_file(dev->cow.file, &flags, NULL, NULL, NULL, - NULL, NULL); + err = open_ubd_file(dev->cow.file, &flags, dev->shared, NULL, + NULL, NULL, NULL, NULL); if(err < 0) goto error; dev->cow.fd = err; } @@ -685,11 +691,11 @@ static int ubd_add(int n) dev->size = ROUND_BLOCK(dev->size); err = ubd_new_disk(MAJOR_NR, dev->size, n, &ubd_gendisk[n]); - if(err) + if(err) goto out_close; - + if(fake_major != MAJOR_NR) - ubd_new_disk(fake_major, dev->size, n, + ubd_new_disk(fake_major, dev->size, n, &fake_gendisk[n]); /* perhaps this should also be under the "if (fake_major)" above */ @@ -854,7 +860,7 @@ int ubd_init(void) return -1; } platform_driver_register(&ubd_driver); - for (i = 0; i < MAX_DEV; i++) + for (i = 0; i < MAX_DEV; i++) ubd_add(i); return 0; } @@ -872,16 +878,16 @@ int ubd_driver_init(void){ * enough. So use anyway the io thread. */ } stack = alloc_stack(0, 0); - io_pid = start_io_thread(stack + PAGE_SIZE - sizeof(void *), + io_pid = start_io_thread(stack + PAGE_SIZE - sizeof(void *), &thread_fd); if(io_pid < 0){ - printk(KERN_ERR + printk(KERN_ERR "ubd : Failed to start I/O thread (errno = %d) - " "falling back to synchronous I/O\n", -io_pid); io_pid = -1; return(0); } - err = um_request_irq(UBD_IRQ, thread_fd, IRQ_READ, ubd_intr, + err = um_request_irq(UBD_IRQ, thread_fd, IRQ_READ, ubd_intr, SA_INTERRUPT, "ubd", ubd_dev); if(err != 0) printk(KERN_ERR "um_request_irq failed - errno = %d\n", -err); @@ -978,7 +984,7 @@ static void cowify_req(struct io_thread_req *req, unsigned long *bitmap, if(req->op == UBD_READ) { for(i = 0; i < req->length >> 9; i++){ if(ubd_test_bit(sector + i, (unsigned char *) bitmap)) - ubd_set_bit(i, (unsigned char *) + ubd_set_bit(i, (unsigned char *) &req->sector_mask); } } @@ -999,7 +1005,7 @@ static int prepare_request(struct request *req, struct io_thread_req *io_req) /* This should be impossible now */ if((rq_data_dir(req) == WRITE) && !dev->openflags.w){ - printk("Write attempted on readonly ubd device %s\n", + printk("Write attempted on readonly ubd device %s\n", disk->disk_name); end_request(req, 0); return(1); @@ -1182,7 +1188,7 @@ int read_cow_bitmap(int fd, void *buf, int offset, int len) return(0); } -int open_ubd_file(char *file, struct openflags *openflags, +int open_ubd_file(char *file, struct openflags *openflags, int shared, char **backing_file_out, int *bitmap_offset_out, unsigned long *bitmap_len_out, int *data_offset_out, int *create_cow_out) @@ -1206,10 +1212,14 @@ int open_ubd_file(char *file, struct openflags *openflags, return fd; } - err = os_lock_file(fd, openflags->w); - if(err < 0){ - printk("Failed to lock '%s', err = %d\n", file, -err); - goto out_close; + if(shared) + printk("Not locking \"%s\" on the host\n", file); + else { + err = os_lock_file(fd, openflags->w); + if(err < 0){ + printk("Failed to lock '%s', err = %d\n", file, -err); + goto out_close; + } } /* Succesful return case! */ @@ -1260,7 +1270,7 @@ int create_cow_file(char *cow_file, char *backing_file, struct openflags flags, int err, fd; flags.c = 1; - fd = open_ubd_file(cow_file, &flags, NULL, NULL, NULL, NULL, NULL); + fd = open_ubd_file(cow_file, &flags, 0, NULL, NULL, NULL, NULL, NULL); if(fd < 0){ err = fd; printk("Open of COW file '%s' failed, errno = %d\n", cow_file, -- cgit v1.2.3-18-g5258 From 98c18238f146a9038098244d60a7d2b1f67ee790 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Mon, 27 Mar 2006 01:14:38 -0800 Subject: [PATCH] uml: fix segfault on signal delivery This fixes a process segfault where a signal was being delivered such that a new stack page needed to be allocated to hold the signal frame. This was tripping some logic in the page fault handler which wouldn't allocate the page if the faulting address was more that 32 bytes lower than the current stack pointer. Since a signal frame is greater than 32 bytes, this exercised that case. It's fixed by updating the SP in the pt_regs before starting to copy the signal frame. Since those are the registers that will be copied on to the stack, we have to be careful to put the original SP, not the new one which points to the signal frame, on the stack. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/sys-i386/signal.c | 59 +++++++++++++++++++++++++++++++++------------ arch/um/sys-x86_64/signal.c | 56 ++++++++++++++++++++++++++++++------------ 2 files changed, 85 insertions(+), 30 deletions(-) (limited to 'arch') diff --git a/arch/um/sys-i386/signal.c b/arch/um/sys-i386/signal.c index 7cd1a82dc8c..33a40f5ef0d 100644 --- a/arch/um/sys-i386/signal.c +++ b/arch/um/sys-i386/signal.c @@ -58,7 +58,7 @@ static int copy_sc_from_user_skas(struct pt_regs *regs, } int copy_sc_to_user_skas(struct sigcontext *to, struct _fpstate *to_fp, - struct pt_regs *regs) + struct pt_regs *regs, unsigned long sp) { struct sigcontext sc; unsigned long fpregs[HOST_FP_SIZE]; @@ -72,7 +72,7 @@ int copy_sc_to_user_skas(struct sigcontext *to, struct _fpstate *to_fp, sc.edi = REGS_EDI(regs->regs.skas.regs); sc.esi = REGS_ESI(regs->regs.skas.regs); sc.ebp = REGS_EBP(regs->regs.skas.regs); - sc.esp = REGS_SP(regs->regs.skas.regs); + sc.esp = sp; sc.ebx = REGS_EBX(regs->regs.skas.regs); sc.edx = REGS_EDX(regs->regs.skas.regs); sc.ecx = REGS_ECX(regs->regs.skas.regs); @@ -132,7 +132,7 @@ int copy_sc_from_user_tt(struct sigcontext *to, struct sigcontext *from, } int copy_sc_to_user_tt(struct sigcontext *to, struct _fpstate *fp, - struct sigcontext *from, int fpsize) + struct sigcontext *from, int fpsize, unsigned long sp) { struct _fpstate *to_fp, *from_fp; int err; @@ -140,11 +140,18 @@ int copy_sc_to_user_tt(struct sigcontext *to, struct _fpstate *fp, to_fp = (fp ? fp : (struct _fpstate *) (to + 1)); from_fp = from->fpstate; err = copy_to_user(to, from, sizeof(*to)); + + /* The SP in the sigcontext is the updated one for the signal + * delivery. The sp passed in is the original, and this needs + * to be restored, so we stick it in separately. + */ + err |= copy_to_user(&SC_SP(to), sp, sizeof(sp)); + if(from_fp != NULL){ err |= copy_to_user(&to->fpstate, &to_fp, sizeof(to->fpstate)); err |= copy_to_user(to_fp, from_fp, fpsize); } - return(err); + return err; } #endif @@ -159,11 +166,11 @@ static int copy_sc_from_user(struct pt_regs *to, void __user *from) } static int copy_sc_to_user(struct sigcontext *to, struct _fpstate *fp, - struct pt_regs *from) + struct pt_regs *from, unsigned long sp) { return(CHOOSE_MODE(copy_sc_to_user_tt(to, fp, UPT_SC(&from->regs), - sizeof(*fp)), - copy_sc_to_user_skas(to, fp, from))); + sizeof(*fp), sp), + copy_sc_to_user_skas(to, fp, from, sp))); } static int copy_ucontext_to_user(struct ucontext *uc, struct _fpstate *fp, @@ -174,7 +181,7 @@ static int copy_ucontext_to_user(struct ucontext *uc, struct _fpstate *fp, err |= put_user(current->sas_ss_sp, &uc->uc_stack.ss_sp); err |= put_user(sas_ss_flags(sp), &uc->uc_stack.ss_flags); err |= put_user(current->sas_ss_size, &uc->uc_stack.ss_size); - err |= copy_sc_to_user(&uc->uc_mcontext, fp, ¤t->thread.regs); + err |= copy_sc_to_user(&uc->uc_mcontext, fp, ¤t->thread.regs, sp); err |= copy_to_user(&uc->uc_sigmask, set, sizeof(*set)); return(err); } @@ -207,6 +214,7 @@ int setup_signal_stack_sc(unsigned long stack_top, int sig, { struct sigframe __user *frame; void *restorer; + unsigned long save_sp = PT_REGS_SP(regs); int err = 0; stack_top &= -8UL; @@ -218,9 +226,19 @@ int setup_signal_stack_sc(unsigned long stack_top, int sig, if(ka->sa.sa_flags & SA_RESTORER) restorer = ka->sa.sa_restorer; + /* Update SP now because the page fault handler refuses to extend + * the stack if the faulting address is too far below the current + * SP, which frame now certainly is. If there's an error, the original + * value is restored on the way out. + * When writing the sigcontext to the stack, we have to write the + * original value, so that's passed to copy_sc_to_user, which does + * the right thing with it. + */ + PT_REGS_SP(regs) = (unsigned long) frame; + err |= __put_user(restorer, &frame->pretcode); err |= __put_user(sig, &frame->sig); - err |= copy_sc_to_user(&frame->sc, NULL, regs); + err |= copy_sc_to_user(&frame->sc, NULL, regs, save_sp); err |= __put_user(mask->sig[0], &frame->sc.oldmask); if (_NSIG_WORDS > 1) err |= __copy_to_user(&frame->extramask, &mask->sig[1], @@ -238,7 +256,7 @@ int setup_signal_stack_sc(unsigned long stack_top, int sig, err |= __put_user(0x80cd, (short __user *)(frame->retcode+6)); if(err) - return(err); + goto err; PT_REGS_SP(regs) = (unsigned long) frame; PT_REGS_IP(regs) = (unsigned long) ka->sa.sa_handler; @@ -248,7 +266,11 @@ int setup_signal_stack_sc(unsigned long stack_top, int sig, if ((current->ptrace & PT_DTRACE) && (current->ptrace & PT_PTRACED)) ptrace_notify(SIGTRAP); - return(0); + return 0; + +err: + PT_REGS_SP(regs) = save_sp; + return err; } int setup_signal_stack_si(unsigned long stack_top, int sig, @@ -257,6 +279,7 @@ int setup_signal_stack_si(unsigned long stack_top, int sig, { struct rt_sigframe __user *frame; void *restorer; + unsigned long save_sp = PT_REGS_SP(regs); int err = 0; stack_top &= -8UL; @@ -268,13 +291,16 @@ int setup_signal_stack_si(unsigned long stack_top, int sig, if(ka->sa.sa_flags & SA_RESTORER) restorer = ka->sa.sa_restorer; + /* See comment above about why this is here */ + PT_REGS_SP(regs) = (unsigned long) frame; + err |= __put_user(restorer, &frame->pretcode); err |= __put_user(sig, &frame->sig); err |= __put_user(&frame->info, &frame->pinfo); err |= __put_user(&frame->uc, &frame->puc); err |= copy_siginfo_to_user(&frame->info, info); err |= copy_ucontext_to_user(&frame->uc, &frame->fpstate, mask, - PT_REGS_SP(regs)); + save_sp); /* * This is movl $,%eax ; int $0x80 @@ -288,9 +314,8 @@ int setup_signal_stack_si(unsigned long stack_top, int sig, err |= __put_user(0x80cd, (short __user *)(frame->retcode+5)); if(err) - return(err); + goto err; - PT_REGS_SP(regs) = (unsigned long) frame; PT_REGS_IP(regs) = (unsigned long) ka->sa.sa_handler; PT_REGS_EAX(regs) = (unsigned long) sig; PT_REGS_EDX(regs) = (unsigned long) &frame->info; @@ -298,7 +323,11 @@ int setup_signal_stack_si(unsigned long stack_top, int sig, if ((current->ptrace & PT_DTRACE) && (current->ptrace & PT_PTRACED)) ptrace_notify(SIGTRAP); - return(0); + return 0; + +err: + PT_REGS_SP(regs) = save_sp; + return err; } long sys_sigreturn(struct pt_regs regs) diff --git a/arch/um/sys-x86_64/signal.c b/arch/um/sys-x86_64/signal.c index fe1d065332b..e75c4e1838b 100644 --- a/arch/um/sys-x86_64/signal.c +++ b/arch/um/sys-x86_64/signal.c @@ -55,7 +55,8 @@ static int copy_sc_from_user_skas(struct pt_regs *regs, } int copy_sc_to_user_skas(struct sigcontext *to, struct _fpstate *to_fp, - struct pt_regs *regs, unsigned long mask) + struct pt_regs *regs, unsigned long mask, + unsigned long sp) { struct faultinfo * fi = ¤t->thread.arch.faultinfo; int err = 0; @@ -70,7 +71,11 @@ int copy_sc_to_user_skas(struct sigcontext *to, struct _fpstate *to_fp, err |= PUTREG(regs, RDI, to, rdi); err |= PUTREG(regs, RSI, to, rsi); err |= PUTREG(regs, RBP, to, rbp); - err |= PUTREG(regs, RSP, to, rsp); + /* Must use orignal RSP, which is passed in, rather than what's in + * the pt_regs, because that's already been updated to point at the + * signal frame. + */ + err |= __put_user(sp, &to->rsp); err |= PUTREG(regs, RBX, to, rbx); err |= PUTREG(regs, RDX, to, rdx); err |= PUTREG(regs, RCX, to, rcx); @@ -102,7 +107,7 @@ int copy_sc_to_user_skas(struct sigcontext *to, struct _fpstate *to_fp, #ifdef CONFIG_MODE_TT int copy_sc_from_user_tt(struct sigcontext *to, struct sigcontext *from, - int fpsize) + int fpsize) { struct _fpstate *to_fp, *from_fp; unsigned long sigs; @@ -120,7 +125,7 @@ int copy_sc_from_user_tt(struct sigcontext *to, struct sigcontext *from, } int copy_sc_to_user_tt(struct sigcontext *to, struct _fpstate *fp, - struct sigcontext *from, int fpsize) + struct sigcontext *from, int fpsize, unsigned long sp) { struct _fpstate *to_fp, *from_fp; int err; @@ -128,11 +133,17 @@ int copy_sc_to_user_tt(struct sigcontext *to, struct _fpstate *fp, to_fp = (fp ? fp : (struct _fpstate *) (to + 1)); from_fp = from->fpstate; err = copy_to_user(to, from, sizeof(*to)); + /* The SP in the sigcontext is the updated one for the signal + * delivery. The sp passed in is the original, and this needs + * to be restored, so we stick it in separately. + */ + err |= copy_to_user(&SC_SP(to), sp, sizeof(sp)); + if(from_fp != NULL){ err |= copy_to_user(&to->fpstate, &to_fp, sizeof(to->fpstate)); err |= copy_to_user(to_fp, from_fp, fpsize); } - return(err); + return err; } #endif @@ -148,11 +159,12 @@ static int copy_sc_from_user(struct pt_regs *to, void __user *from) } static int copy_sc_to_user(struct sigcontext *to, struct _fpstate *fp, - struct pt_regs *from, unsigned long mask) + struct pt_regs *from, unsigned long mask, + unsigned long sp) { return(CHOOSE_MODE(copy_sc_to_user_tt(to, fp, UPT_SC(&from->regs), - sizeof(*fp)), - copy_sc_to_user_skas(to, fp, from, mask))); + sizeof(*fp), sp), + copy_sc_to_user_skas(to, fp, from, mask, sp))); } struct rt_sigframe @@ -170,6 +182,7 @@ int setup_signal_stack_si(unsigned long stack_top, int sig, { struct rt_sigframe __user *frame; struct _fpstate __user *fp = NULL; + unsigned long save_sp = PT_REGS_RSP(regs); int err = 0; struct task_struct *me = current; @@ -193,14 +206,25 @@ int setup_signal_stack_si(unsigned long stack_top, int sig, goto out; } + /* Update SP now because the page fault handler refuses to extend + * the stack if the faulting address is too far below the current + * SP, which frame now certainly is. If there's an error, the original + * value is restored on the way out. + * When writing the sigcontext to the stack, we have to write the + * original value, so that's passed to copy_sc_to_user, which does + * the right thing with it. + */ + PT_REGS_RSP(regs) = (unsigned long) frame; + /* Create the ucontext. */ err |= __put_user(0, &frame->uc.uc_flags); err |= __put_user(0, &frame->uc.uc_link); err |= __put_user(me->sas_ss_sp, &frame->uc.uc_stack.ss_sp); - err |= __put_user(sas_ss_flags(PT_REGS_SP(regs)), + err |= __put_user(sas_ss_flags(save_sp), &frame->uc.uc_stack.ss_flags); err |= __put_user(me->sas_ss_size, &frame->uc.uc_stack.ss_size); - err |= copy_sc_to_user(&frame->uc.uc_mcontext, fp, regs, set->sig[0]); + err |= copy_sc_to_user(&frame->uc.uc_mcontext, fp, regs, set->sig[0], + save_sp); err |= __put_user(fp, &frame->uc.uc_mcontext.fpstate); if (sizeof(*set) == 16) { __put_user(set->sig[0], &frame->uc.uc_sigmask.sig[0]); @@ -217,10 +241,10 @@ int setup_signal_stack_si(unsigned long stack_top, int sig, err |= __put_user(ka->sa.sa_restorer, &frame->pretcode); else /* could use a vstub here */ - goto out; + goto restore_sp; if (err) - goto out; + goto restore_sp; /* Set up registers for signal handler */ { @@ -238,10 +262,12 @@ int setup_signal_stack_si(unsigned long stack_top, int sig, PT_REGS_RSI(regs) = (unsigned long) &frame->info; PT_REGS_RDX(regs) = (unsigned long) &frame->uc; PT_REGS_RIP(regs) = (unsigned long) ka->sa.sa_handler; - - PT_REGS_RSP(regs) = (unsigned long) frame; out: - return(err); + return err; + +restore_sp: + PT_REGS_RSP(regs) = save_sp; + return err; } long sys_rt_sigreturn(struct pt_regs *regs) -- cgit v1.2.3-18-g5258 From 1fbbd6844e6a84e5d166ab475dc298d3b89fa4bf Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Mon, 27 Mar 2006 01:14:39 -0800 Subject: [PATCH] uml: prevent umid theft Behavior when booting two UMLs with the same umid was broken. The second one would steal the umid. This fixes that, making the second UML take a random umid instead. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/os-Linux/umid.c | 33 +++++++++++++++++++++++---------- 1 file changed, 23 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/um/os-Linux/umid.c b/arch/um/os-Linux/umid.c index ecf107ae5ac..198e5916328 100644 --- a/arch/um/os-Linux/umid.c +++ b/arch/um/os-Linux/umid.c @@ -143,8 +143,10 @@ static int not_dead_yet(char *dir) goto out_close; } - if((kill(p, 0) == 0) || (errno != ESRCH)) + if((kill(p, 0) == 0) || (errno != ESRCH)){ + printk("umid \"%s\" is already in use by pid %d\n", umid, p); return 1; + } err = actually_do_remove(dir); if(err) @@ -234,33 +236,44 @@ int __init make_umid(void) err = mkdir(tmp, 0777); if(err < 0){ err = -errno; - if(errno != EEXIST) + if(err != -EEXIST) goto err; - if(not_dead_yet(tmp) < 0) + /* 1 -> this umid is already in use + * < 0 -> we couldn't remove the umid directory + * In either case, we can't use this umid, so return -EEXIST. + */ + if(not_dead_yet(tmp) != 0) goto err; err = mkdir(tmp, 0777); } - if(err < 0){ - printk("Failed to create '%s' - err = %d\n", umid, err); - goto err_rmdir; + if(err){ + err = -errno; + printk("Failed to create '%s' - err = %d\n", umid, -errno); + goto err; } umid_setup = 1; create_pid_file(); - return 0; - - err_rmdir: - rmdir(tmp); + err = 0; err: return err; } static int __init make_umid_init(void) { + if(!make_umid()) + return 0; + + /* If initializing with the given umid failed, then try again with + * a random one. + */ + printk("Failed to initialize umid \"%s\", trying with a random umid\n", + umid); + *umid = '\0'; make_umid(); return 0; -- cgit v1.2.3-18-g5258 From 5f4e8fd08f3993bc31a7dd91767fdb4da4fe6278 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Mon, 27 Mar 2006 01:14:40 -0800 Subject: [PATCH] uml: fix thread startup race This fixes a race in the starting of write_sigio_thread. Previously, some of the data needed by the thread was initialized after the clone. If the thread ran immediately, it would see the uninitialized data, including an empty pollfds, which would cause it to hang. We move the data initialization to before the clone, and adjust the error paths and cleanup accordingly. Signed-off-by: Jeff Dike Cc: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/os-Linux/sigio.c | 55 ++++++++++++++++++++++++------------------------ 1 file changed, 27 insertions(+), 28 deletions(-) (limited to 'arch') diff --git a/arch/um/os-Linux/sigio.c b/arch/um/os-Linux/sigio.c index 7604c404c4c..9ba94294714 100644 --- a/arch/um/os-Linux/sigio.c +++ b/arch/um/os-Linux/sigio.c @@ -29,8 +29,10 @@ static int write_sigio_pid = -1; * the descriptors closed after it is killed. So, it can't see them change. * On the UML side, they are changed under the sigio_lock. */ -static int write_sigio_fds[2] = { -1, -1 }; -static int sigio_private[2] = { -1, -1 }; +#define SIGIO_FDS_INIT {-1, -1} + +static int write_sigio_fds[2] = SIGIO_FDS_INIT; +static int sigio_private[2] = SIGIO_FDS_INIT; struct pollfds { struct pollfd *poll; @@ -270,49 +272,46 @@ void write_sigio_workaround(void) /* Did we race? Don't try to optimize this, please, it's not so likely * to happen, and no more than once at the boot. */ if(write_sigio_pid != -1) - goto out_unlock; - - write_sigio_pid = run_helper_thread(write_sigio_thread, NULL, - CLONE_FILES | CLONE_VM, &stack, 0); + goto out_free; - if (write_sigio_pid < 0) - goto out_clear; + current_poll = ((struct pollfds) { .poll = p, + .used = 1, + .size = 1 }); if (write_sigio_irq(l_write_sigio_fds[0])) - goto out_kill; + goto out_clear_poll; - /* Success, finally. */ memcpy(write_sigio_fds, l_write_sigio_fds, sizeof(l_write_sigio_fds)); memcpy(sigio_private, l_sigio_private, sizeof(l_sigio_private)); - current_poll = ((struct pollfds) { .poll = p, - .used = 1, - .size = 1 }); + write_sigio_pid = run_helper_thread(write_sigio_thread, NULL, + CLONE_FILES | CLONE_VM, &stack, 0); - sigio_unlock(); - return; + if (write_sigio_pid < 0) + goto out_clear; - out_kill: - l_write_sigio_pid = write_sigio_pid; - write_sigio_pid = -1; sigio_unlock(); - /* Going to call waitpid, avoid holding the lock. */ - os_kill_process(l_write_sigio_pid, 1); - goto out_free; + return; - out_clear: +out_clear: write_sigio_pid = -1; - out_unlock: - sigio_unlock(); - out_free: + write_sigio_fds[0] = -1; + write_sigio_fds[1] = -1; + sigio_private[0] = -1; + sigio_private[1] = -1; +out_clear_poll: + current_poll = ((struct pollfds) { .poll = NULL, + .size = 0, + .used = 0 }); +out_free: kfree(p); - out_close2: + sigio_unlock(); +out_close2: close(l_sigio_private[0]); close(l_sigio_private[1]); - out_close1: +out_close1: close(l_write_sigio_fds[0]); close(l_write_sigio_fds[1]); - return; } void sigio_cleanup(void) -- cgit v1.2.3-18-g5258 From 1e9f28fa1eb9773bf65bae08288c6a0a38eef4a7 Mon Sep 17 00:00:00 2001 From: "Siddha, Suresh B" Date: Mon, 27 Mar 2006 01:15:22 -0800 Subject: [PATCH] sched: new sched domain for representing multi-core Add a new sched domain for representing multi-core with shared caches between cores. Consider a dual package system, each package containing two cores and with last level cache shared between cores with in a package. If there are two runnable processes, with this appended patch those two processes will be scheduled on different packages. On such systems, with this patch we have observed 8% perf improvement with specJBB(2 warehouse) benchmark and 35% improvement with CFP2000 rate(with 2 users). This new domain will come into play only on multi-core systems with shared caches. On other systems, this sched domain will be removed by domain degeneration code. This new domain can be also used for implementing power savings policy (see OLS 2005 CMP kernel scheduler paper for more details.. I will post another patch for power savings policy soon) Most of the arch/* file changes are for cpu_coregroup_map() implementation. Signed-off-by: Suresh Siddha Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/Kconfig | 9 +++++++++ arch/i386/kernel/cpu/common.c | 10 +++++++--- arch/i386/kernel/cpu/intel_cacheinfo.c | 22 ++++++++++++++++++++-- arch/i386/kernel/smpboot.c | 24 ++++++++++++++++++++++++ arch/x86_64/Kconfig | 9 +++++++++ arch/x86_64/kernel/setup.c | 3 ++- arch/x86_64/kernel/smpboot.c | 24 ++++++++++++++++++++++++ 7 files changed, 95 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index f7db71d0b91..f17bd1d2707 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -231,6 +231,15 @@ config SCHED_SMT cost of slightly increased overhead in some places. If unsure say N here. +config SCHED_MC + bool "Multi-core scheduler support" + depends on SMP + default y + help + Multi-core scheduler support improves the CPU scheduler's decision + making when dealing with multi-core CPU chips at a cost of slightly + increased overhead in some places. If unsure say N here. + source "kernel/Kconfig.preempt" config X86_UP_APIC diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c index 7e3d6b6a4e9..a06a49075f1 100644 --- a/arch/i386/kernel/cpu/common.c +++ b/arch/i386/kernel/cpu/common.c @@ -266,7 +266,7 @@ static void __init early_cpu_detect(void) void __cpuinit generic_identify(struct cpuinfo_x86 * c) { u32 tfms, xlvl; - int junk; + int ebx; if (have_cpuid_p()) { /* Get vendor name */ @@ -282,7 +282,7 @@ void __cpuinit generic_identify(struct cpuinfo_x86 * c) /* Intel-defined flags: level 0x00000001 */ if ( c->cpuid_level >= 0x00000001 ) { u32 capability, excap; - cpuid(0x00000001, &tfms, &junk, &excap, &capability); + cpuid(0x00000001, &tfms, &ebx, &excap, &capability); c->x86_capability[0] = capability; c->x86_capability[4] = excap; c->x86 = (tfms >> 8) & 15; @@ -292,6 +292,11 @@ void __cpuinit generic_identify(struct cpuinfo_x86 * c) if (c->x86 >= 0x6) c->x86_model += ((tfms >> 16) & 0xF) << 4; c->x86_mask = tfms & 15; +#ifdef CONFIG_SMP + c->apicid = phys_pkg_id((ebx >> 24) & 0xFF, 0); +#else + c->apicid = (ebx >> 24) & 0xFF; +#endif } else { /* Have CPUID level 0 only - unheard of */ c->x86 = 4; @@ -474,7 +479,6 @@ void __cpuinit detect_ht(struct cpuinfo_x86 *c) cpuid(1, &eax, &ebx, &ecx, &edx); - c->apicid = phys_pkg_id((ebx >> 24) & 0xFF, 0); if (!cpu_has(c, X86_FEATURE_HT) || cpu_has(c, X86_FEATURE_CMP_LEGACY)) return; diff --git a/arch/i386/kernel/cpu/intel_cacheinfo.c b/arch/i386/kernel/cpu/intel_cacheinfo.c index ce61921369e..7e7fd4e67dd 100644 --- a/arch/i386/kernel/cpu/intel_cacheinfo.c +++ b/arch/i386/kernel/cpu/intel_cacheinfo.c @@ -173,6 +173,10 @@ unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c) unsigned int trace = 0, l1i = 0, l1d = 0, l2 = 0, l3 = 0; /* Cache sizes */ unsigned int new_l1d = 0, new_l1i = 0; /* Cache sizes from cpuid(4) */ unsigned int new_l2 = 0, new_l3 = 0, i; /* Cache sizes from cpuid(4) */ + unsigned int l2_id = 0, l3_id = 0, num_threads_sharing, index_msb; +#ifdef CONFIG_SMP + unsigned int cpu = (c == &boot_cpu_data) ? 0 : (c - cpu_data); +#endif if (c->cpuid_level > 3) { static int is_initialized; @@ -205,9 +209,15 @@ unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c) break; case 2: new_l2 = this_leaf.size/1024; + num_threads_sharing = 1 + this_leaf.eax.split.num_threads_sharing; + index_msb = get_count_order(num_threads_sharing); + l2_id = c->apicid >> index_msb; break; case 3: new_l3 = this_leaf.size/1024; + num_threads_sharing = 1 + this_leaf.eax.split.num_threads_sharing; + index_msb = get_count_order(num_threads_sharing); + l3_id = c->apicid >> index_msb; break; default: break; @@ -273,11 +283,19 @@ unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c) if (new_l1i) l1i = new_l1i; - if (new_l2) + if (new_l2) { l2 = new_l2; +#ifdef CONFIG_SMP + cpu_llc_id[cpu] = l2_id; +#endif + } - if (new_l3) + if (new_l3) { l3 = new_l3; +#ifdef CONFIG_SMP + cpu_llc_id[cpu] = l3_id; +#endif + } if ( trace ) printk (KERN_INFO "CPU: Trace cache: %dK uops", trace); diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index 82371d83bfa..a6969903f2d 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -72,6 +72,9 @@ int phys_proc_id[NR_CPUS] __read_mostly = {[0 ... NR_CPUS-1] = BAD_APICID}; /* Core ID of each logical CPU */ int cpu_core_id[NR_CPUS] __read_mostly = {[0 ... NR_CPUS-1] = BAD_APICID}; +/* Last level cache ID of each logical CPU */ +int cpu_llc_id[NR_CPUS] __cpuinitdata = {[0 ... NR_CPUS-1] = BAD_APICID}; + /* representing HT siblings of each logical CPU */ cpumask_t cpu_sibling_map[NR_CPUS] __read_mostly; EXPORT_SYMBOL(cpu_sibling_map); @@ -440,6 +443,18 @@ static void __devinit smp_callin(void) static int cpucount; +/* maps the cpu to the sched domain representing multi-core */ +cpumask_t cpu_coregroup_map(int cpu) +{ + struct cpuinfo_x86 *c = cpu_data + cpu; + /* + * For perf, we return last level cache shared map. + * TBD: when power saving sched policy is added, we will return + * cpu_core_map when power saving policy is enabled + */ + return c->llc_shared_map; +} + /* representing cpus for which sibling maps can be computed */ static cpumask_t cpu_sibling_setup_map; @@ -459,12 +474,16 @@ set_cpu_sibling_map(int cpu) cpu_set(cpu, cpu_sibling_map[i]); cpu_set(i, cpu_core_map[cpu]); cpu_set(cpu, cpu_core_map[i]); + cpu_set(i, c[cpu].llc_shared_map); + cpu_set(cpu, c[i].llc_shared_map); } } } else { cpu_set(cpu, cpu_sibling_map[cpu]); } + cpu_set(cpu, c[cpu].llc_shared_map); + if (current_cpu_data.x86_max_cores == 1) { cpu_core_map[cpu] = cpu_sibling_map[cpu]; c[cpu].booted_cores = 1; @@ -472,6 +491,11 @@ set_cpu_sibling_map(int cpu) } for_each_cpu_mask(i, cpu_sibling_setup_map) { + if (cpu_llc_id[cpu] != BAD_APICID && + cpu_llc_id[cpu] == cpu_llc_id[i]) { + cpu_set(i, c[cpu].llc_shared_map); + cpu_set(cpu, c[i].llc_shared_map); + } if (phys_proc_id[cpu] == phys_proc_id[i]) { cpu_set(i, cpu_core_map[cpu]); cpu_set(cpu, cpu_core_map[i]); diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index 45efe0ca88f..1cb4aa241c8 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -250,6 +250,15 @@ config SCHED_SMT cost of slightly increased overhead in some places. If unsure say N here. +config SCHED_MC + bool "Multi-core scheduler support" + depends on SMP + default y + help + Multi-core scheduler support improves the CPU scheduler's decision + making when dealing with multi-core CPU chips at a cost of slightly + increased overhead in some places. If unsure say N here. + source "kernel/Kconfig.preempt" config NUMA diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index a57eec8311a..d1f3e9272c0 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -962,7 +962,6 @@ static void __cpuinit detect_ht(struct cpuinfo_x86 *c) cpuid(1, &eax, &ebx, &ecx, &edx); - c->apicid = phys_pkg_id(0); if (!cpu_has(c, X86_FEATURE_HT) || cpu_has(c, X86_FEATURE_CMP_LEGACY)) return; @@ -1171,6 +1170,8 @@ void __cpuinit identify_cpu(struct cpuinfo_x86 *c) c->x86_capability[2] = cpuid_edx(0x80860001); } + c->apicid = phys_pkg_id(0); + /* * Vendor-specific initialization. In this section we * canonicalize the feature flags, meaning if there are diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c index 66e98659d07..ea48fa63807 100644 --- a/arch/x86_64/kernel/smpboot.c +++ b/arch/x86_64/kernel/smpboot.c @@ -68,6 +68,9 @@ u8 phys_proc_id[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = BAD_APICID }; /* core ID of each logical CPU */ u8 cpu_core_id[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = BAD_APICID }; +/* Last level cache ID of each logical CPU */ +u8 cpu_llc_id[NR_CPUS] __cpuinitdata = {[0 ... NR_CPUS-1] = BAD_APICID}; + /* Bitmask of currently online CPUs */ cpumask_t cpu_online_map __read_mostly; @@ -445,6 +448,18 @@ void __cpuinit smp_callin(void) cpu_set(cpuid, cpu_callin_map); } +/* maps the cpu to the sched domain representing multi-core */ +cpumask_t cpu_coregroup_map(int cpu) +{ + struct cpuinfo_x86 *c = cpu_data + cpu; + /* + * For perf, we return last level cache shared map. + * TBD: when power saving sched policy is added, we will return + * cpu_core_map when power saving policy is enabled + */ + return c->llc_shared_map; +} + /* representing cpus for which sibling maps can be computed */ static cpumask_t cpu_sibling_setup_map; @@ -463,12 +478,16 @@ static inline void set_cpu_sibling_map(int cpu) cpu_set(cpu, cpu_sibling_map[i]); cpu_set(i, cpu_core_map[cpu]); cpu_set(cpu, cpu_core_map[i]); + cpu_set(i, c[cpu].llc_shared_map); + cpu_set(cpu, c[i].llc_shared_map); } } } else { cpu_set(cpu, cpu_sibling_map[cpu]); } + cpu_set(cpu, c[cpu].llc_shared_map); + if (current_cpu_data.x86_max_cores == 1) { cpu_core_map[cpu] = cpu_sibling_map[cpu]; c[cpu].booted_cores = 1; @@ -476,6 +495,11 @@ static inline void set_cpu_sibling_map(int cpu) } for_each_cpu_mask(i, cpu_sibling_setup_map) { + if (cpu_llc_id[cpu] != BAD_APICID && + cpu_llc_id[cpu] == cpu_llc_id[i]) { + cpu_set(i, c[cpu].llc_shared_map); + cpu_set(cpu, c[i].llc_shared_map); + } if (phys_proc_id[cpu] == phys_proc_id[i]) { cpu_set(i, cpu_core_map[cpu]); cpu_set(cpu, cpu_core_map[i]); -- cgit v1.2.3-18-g5258 From b06be912a3ad68c69dba0ed6e92723140020e392 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Mon, 27 Mar 2006 01:15:24 -0800 Subject: [PATCH] x86: don't use cpuid.2 to determine cache info if cpuid.4 is supported Don't use cpuid.2 to determine cache info if cpuid.4 is supported. The exception is P4 trace cache. We always use cpuid.2 to get trace cache under P4. Signed-off-by: Shaohua Li Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/cpu/intel_cacheinfo.c | 69 ++++++++++++++++++++-------------- 1 file changed, 41 insertions(+), 28 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/intel_cacheinfo.c b/arch/i386/kernel/cpu/intel_cacheinfo.c index 7e7fd4e67dd..9df87b03612 100644 --- a/arch/i386/kernel/cpu/intel_cacheinfo.c +++ b/arch/i386/kernel/cpu/intel_cacheinfo.c @@ -225,11 +225,19 @@ unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c) } } } - if (c->cpuid_level > 1) { + /* + * Don't use cpuid2 if cpuid4 is supported. For P4, we use cpuid2 for + * trace cache + */ + if ((num_cache_leaves == 0 || c->x86 == 15) && c->cpuid_level > 1) { /* supports eax=2 call */ int i, j, n; int regs[4]; unsigned char *dp = (unsigned char *)regs; + int only_trace = 0; + + if (num_cache_leaves != 0 && c->x86 == 15) + only_trace = 1; /* Number of times to iterate */ n = cpuid_eax(2) & 0xFF; @@ -251,6 +259,8 @@ unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c) while (cache_table[k].descriptor != 0) { if (cache_table[k].descriptor == des) { + if (only_trace && cache_table[k].cache_type != LVL_TRACE) + break; switch (cache_table[k].cache_type) { case LVL_1_INST: l1i += cache_table[k].size; @@ -276,43 +286,46 @@ unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c) } } } + } - if (new_l1d) - l1d = new_l1d; + if (new_l1d) + l1d = new_l1d; - if (new_l1i) - l1i = new_l1i; + if (new_l1i) + l1i = new_l1i; - if (new_l2) { - l2 = new_l2; + if (new_l2) { + l2 = new_l2; #ifdef CONFIG_SMP - cpu_llc_id[cpu] = l2_id; + cpu_llc_id[cpu] = l2_id; #endif - } + } - if (new_l3) { - l3 = new_l3; + if (new_l3) { + l3 = new_l3; #ifdef CONFIG_SMP - cpu_llc_id[cpu] = l3_id; + cpu_llc_id[cpu] = l3_id; #endif - } - - if ( trace ) - printk (KERN_INFO "CPU: Trace cache: %dK uops", trace); - else if ( l1i ) - printk (KERN_INFO "CPU: L1 I cache: %dK", l1i); - if ( l1d ) - printk(", L1 D cache: %dK\n", l1d); - else - printk("\n"); - if ( l2 ) - printk(KERN_INFO "CPU: L2 cache: %dK\n", l2); - if ( l3 ) - printk(KERN_INFO "CPU: L3 cache: %dK\n", l3); - - c->x86_cache_size = l3 ? l3 : (l2 ? l2 : (l1i+l1d)); } + if (trace) + printk (KERN_INFO "CPU: Trace cache: %dK uops", trace); + else if ( l1i ) + printk (KERN_INFO "CPU: L1 I cache: %dK", l1i); + + if (l1d) + printk(", L1 D cache: %dK\n", l1d); + else + printk("\n"); + + if (l2) + printk(KERN_INFO "CPU: L2 cache: %dK\n", l2); + + if (l3) + printk(KERN_INFO "CPU: L3 cache: %dK\n", l3); + + c->x86_cache_size = l3 ? l3 : (l2 ? l2 : (l1i+l1d)); + return l2; } -- cgit v1.2.3-18-g5258 From dc8ecb43701a78bd3c38e7fed1d1c76840579450 Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Mon, 27 Mar 2006 01:15:34 -0800 Subject: [PATCH] unify pfn_to_page: x86_64 pfn_to_page x86_64 can use generic funcs. For DISCONTIGMEM, CONFIG_OUT_OF_LINE_PFN_TO_PAGE is selected. Signed-off-by: KAMEZAWA Hiroyuki Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86_64/Kconfig | 4 ++++ arch/x86_64/mm/numa.c | 15 --------------- 2 files changed, 4 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index 1cb4aa241c8..4310b4a311a 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -334,6 +334,10 @@ config HAVE_ARCH_EARLY_PFN_TO_NID def_bool y depends on NUMA +config OUT_OF_LINE_PFN_TO_PAGE + def_bool y + depends on DISCONTIGMEM + config NR_CPUS int "Maximum number of CPUs (2-256)" range 2 255 diff --git a/arch/x86_64/mm/numa.c b/arch/x86_64/mm/numa.c index 63c72641b73..4be82d6e2b4 100644 --- a/arch/x86_64/mm/numa.c +++ b/arch/x86_64/mm/numa.c @@ -377,21 +377,6 @@ EXPORT_SYMBOL(node_data); * Should do that. */ -/* Requires pfn_valid(pfn) to be true */ -struct page *pfn_to_page(unsigned long pfn) -{ - int nid = phys_to_nid(((unsigned long)(pfn)) << PAGE_SHIFT); - return (pfn - node_start_pfn(nid)) + NODE_DATA(nid)->node_mem_map; -} -EXPORT_SYMBOL(pfn_to_page); - -unsigned long page_to_pfn(struct page *page) -{ - return (long)(((page) - page_zone(page)->zone_mem_map) + - page_zone(page)->zone_start_pfn); -} -EXPORT_SYMBOL(page_to_pfn); - int pfn_valid(unsigned long pfn) { unsigned nid; -- cgit v1.2.3-18-g5258 From ec936fc563715a9e2b2e363eb060655b49529325 Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Mon, 27 Mar 2006 01:15:59 -0800 Subject: [PATCH] for_each_online_pgdat: renaming for_each_pgdat Replace for_each_pgdat() with for_each_online_pgdat(). Signed-off-by: KAMEZAWA Hiroyuki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/mm/pgtable.c | 2 +- arch/ia64/mm/discontig.c | 4 ++-- arch/ia64/mm/init.c | 2 +- arch/m32r/mm/init.c | 2 +- arch/powerpc/mm/mem.c | 4 ++-- arch/x86_64/mm/init.c | 2 +- 6 files changed, 8 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/i386/mm/pgtable.c b/arch/i386/mm/pgtable.c index 9db3242103b..2889567e21a 100644 --- a/arch/i386/mm/pgtable.c +++ b/arch/i386/mm/pgtable.c @@ -36,7 +36,7 @@ void show_mem(void) printk(KERN_INFO "Mem-info:\n"); show_free_areas(); printk(KERN_INFO "Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); - for_each_pgdat(pgdat) { + for_each_online_pgdat(pgdat) { pgdat_resize_lock(pgdat, &flags); for (i = 0; i < pgdat->node_spanned_pages; ++i) { page = pgdat_page_nr(pgdat, i); diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c index 2f5e44862e9..384f1d7dce9 100644 --- a/arch/ia64/mm/discontig.c +++ b/arch/ia64/mm/discontig.c @@ -386,7 +386,7 @@ static void __init pgdat_insert(pg_data_t *pgdat) { pg_data_t *prev = NULL, *next; - for_each_pgdat(next) + for_each_online_pgdat(next) if (pgdat->node_id < next->node_id) break; else @@ -560,7 +560,7 @@ void show_mem(void) printk("Mem-info:\n"); show_free_areas(); printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); - for_each_pgdat(pgdat) { + for_each_online_pgdat(pgdat) { unsigned long present; unsigned long flags; int shared = 0, cached = 0, reserved = 0; diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c index ff4f31fcd33..2ef1151cde9 100644 --- a/arch/ia64/mm/init.c +++ b/arch/ia64/mm/init.c @@ -600,7 +600,7 @@ mem_init (void) kclist_add(&kcore_vmem, (void *)VMALLOC_START, VMALLOC_END-VMALLOC_START); kclist_add(&kcore_kernel, _stext, _end - _stext); - for_each_pgdat(pgdat) + for_each_online_pgdat(pgdat) if (pgdat->bdata->node_bootmem_map) totalram_pages += free_all_bootmem_node(pgdat); diff --git a/arch/m32r/mm/init.c b/arch/m32r/mm/init.c index c9e7dad860b..2e0fe199ce3 100644 --- a/arch/m32r/mm/init.c +++ b/arch/m32r/mm/init.c @@ -47,7 +47,7 @@ void show_mem(void) printk("Mem-info:\n"); show_free_areas(); printk("Free swap: %6ldkB\n",nr_swap_pages<<(PAGE_SHIFT-10)); - for_each_pgdat(pgdat) { + for_each_online_pgdat(pgdat) { unsigned long flags; pgdat_resize_lock(pgdat, &flags); for (i = 0; i < pgdat->node_spanned_pages; ++i) { diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index badac10d700..5e435a9c343 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -195,7 +195,7 @@ void show_mem(void) printk("Mem-info:\n"); show_free_areas(); printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); - for_each_pgdat(pgdat) { + for_each_online_pgdat(pgdat) { unsigned long flags; pgdat_resize_lock(pgdat, &flags); for (i = 0; i < pgdat->node_spanned_pages; i++) { @@ -351,7 +351,7 @@ void __init mem_init(void) max_mapnr = max_pfn; totalram_pages += free_all_bootmem(); #endif - for_each_pgdat(pgdat) { + for_each_online_pgdat(pgdat) { for (i = 0; i < pgdat->node_spanned_pages; i++) { if (!pfn_valid(pgdat->node_start_pfn + i)) continue; diff --git a/arch/x86_64/mm/init.c b/arch/x86_64/mm/init.c index b0441562544..e5f7f1c3446 100644 --- a/arch/x86_64/mm/init.c +++ b/arch/x86_64/mm/init.c @@ -72,7 +72,7 @@ void show_mem(void) show_free_areas(); printk(KERN_INFO "Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); - for_each_pgdat(pgdat) { + for_each_online_pgdat(pgdat) { for (i = 0; i < pgdat->node_spanned_pages; ++i) { page = pfn_to_page(pgdat->node_start_pfn + i); total++; -- cgit v1.2.3-18-g5258 From 3571761fe49d960bb720c2308ffb9401f0a5e161 Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Mon, 27 Mar 2006 01:16:00 -0800 Subject: [PATCH] for_each_online_pgdat: remove sorting pgdat Because pgdat_list was linked to pgdat_list in *reverse* order, (By default) some of arch has to sort it by themselves. for_each_pgdat has gone..for_each_online_pgdat() uses node_online_map, which doesn't need to be sorted. This patch removes codes for sorting pgdat. Signed-off-by: KAMEZAWA Hiroyuki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/mm/discontig.c | 11 ----------- arch/ia64/mm/discontig.c | 31 ------------------------------- arch/m32r/mm/discontig.c | 6 ------ 3 files changed, 48 deletions(-) (limited to 'arch') diff --git a/arch/i386/mm/discontig.c b/arch/i386/mm/discontig.c index c4af9638dbf..c3f3ae95e22 100644 --- a/arch/i386/mm/discontig.c +++ b/arch/i386/mm/discontig.c @@ -352,17 +352,6 @@ void __init zone_sizes_init(void) { int nid; - /* - * Insert nodes into pgdat_list backward so they appear in order. - * Clobber node 0's links and NULL out pgdat_list before starting. - */ - pgdat_list = NULL; - for (nid = MAX_NUMNODES - 1; nid >= 0; nid--) { - if (!node_online(nid)) - continue; - NODE_DATA(nid)->pgdat_next = pgdat_list; - pgdat_list = NODE_DATA(nid); - } for_each_online_node(nid) { unsigned long zones_size[MAX_NR_ZONES] = {0, 0, 0}; diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c index 384f1d7dce9..ec9eeb89975 100644 --- a/arch/ia64/mm/discontig.c +++ b/arch/ia64/mm/discontig.c @@ -378,31 +378,6 @@ static void __init *memory_less_node_alloc(int nid, unsigned long pernodesize) return ptr; } -/** - * pgdat_insert - insert the pgdat into global pgdat_list - * @pgdat: the pgdat for a node. - */ -static void __init pgdat_insert(pg_data_t *pgdat) -{ - pg_data_t *prev = NULL, *next; - - for_each_online_pgdat(next) - if (pgdat->node_id < next->node_id) - break; - else - prev = next; - - if (prev) { - prev->pgdat_next = pgdat; - pgdat->pgdat_next = next; - } else { - pgdat->pgdat_next = pgdat_list; - pgdat_list = pgdat; - } - - return; -} - /** * memory_less_nodes - allocate and initialize CPU only nodes pernode * information. @@ -745,11 +720,5 @@ void __init paging_init(void) pfn_offset, zholes_size); } - /* - * Make memory less nodes become a member of the known nodes. - */ - for_each_node_mask(node, memory_less_mask) - pgdat_insert(mem_data[node].pgdat); - zero_page_memmap_ptr = virt_to_page(ia64_imva(empty_zero_page)); } diff --git a/arch/m32r/mm/discontig.c b/arch/m32r/mm/discontig.c index 08e72795555..70c8528a0ad 100644 --- a/arch/m32r/mm/discontig.c +++ b/arch/m32r/mm/discontig.c @@ -137,12 +137,6 @@ unsigned long __init zone_sizes_init(void) int nid, i; mem_prof_t *mp; - pgdat_list = NULL; - for (nid = num_online_nodes() - 1 ; nid >= 0 ; nid--) { - NODE_DATA(nid)->pgdat_next = pgdat_list; - pgdat_list = NODE_DATA(nid); - } - for_each_online_node(nid) { mp = &mem_prof[nid]; for (i = 0 ; i < MAX_NR_ZONES ; i++) { -- cgit v1.2.3-18-g5258 From 22a9835c350782a5c3257343713932af3ac92ee0 Mon Sep 17 00:00:00 2001 From: Dave Hansen Date: Mon, 27 Mar 2006 01:16:04 -0800 Subject: [PATCH] unify PFN_* macros Just about every architecture defines some macros to do operations on pfns. They're all virtually identical. This patch consolidates all of them. One minor glitch is that at least i386 uses them in a very skeletal header file. To keep away from #include dependency hell, I stuck the new definitions in a new, isolated header. Of all of the implementations, sh64 is the only one that varied by a bit. It used some masks to ensure that any sign-extension got ripped away before the arithmetic is done. This has been posted to that sh64 maintainers and the development list. Compiles on x86, x86_64, ia64 and ppc64. Signed-off-by: Dave Hansen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/alpha/kernel/setup.c | 9 +-------- arch/alpha/mm/numa.c | 4 +--- arch/arm26/mm/init.c | 7 +------ arch/cris/kernel/setup.c | 5 +---- arch/i386/kernel/setup.c | 1 + arch/i386/mm/discontig.c | 1 + arch/m32r/kernel/setup.c | 1 + arch/m32r/mm/discontig.c | 1 + arch/m32r/mm/init.c | 1 + arch/mips/ite-boards/ivr/init.c | 3 --- arch/mips/ite-boards/qed-4n-s01b/init.c | 3 --- arch/mips/kernel/setup.c | 9 +-------- arch/mips/mips-boards/generic/memory.c | 7 ++----- arch/mips/mips-boards/sim/sim_mem.c | 7 ++----- arch/mips/mm/init.c | 4 +--- arch/mips/sgi-ip27/ip27-memory.c | 3 +-- arch/sh/kernel/setup.c | 5 +---- arch/sh64/kernel/setup.c | 1 + arch/um/kernel/physmem.c | 3 +-- 19 files changed, 19 insertions(+), 56 deletions(-) (limited to 'arch') diff --git a/arch/alpha/kernel/setup.c b/arch/alpha/kernel/setup.c index b4e5f8ff2b2..9402624453c 100644 --- a/arch/alpha/kernel/setup.c +++ b/arch/alpha/kernel/setup.c @@ -34,6 +34,7 @@ #include #include #include +#include #ifdef CONFIG_MAGIC_SYSRQ #include #include @@ -241,9 +242,6 @@ reserve_std_resources(void) request_resource(io, standard_io_resources+i); } -#define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT) -#define PFN_DOWN(x) ((x) >> PAGE_SHIFT) -#define PFN_PHYS(x) ((x) << PAGE_SHIFT) #define PFN_MAX PFN_DOWN(0x80000000) #define for_each_mem_cluster(memdesc, cluster, i) \ for ((cluster) = (memdesc)->cluster, (i) = 0; \ @@ -472,11 +470,6 @@ page_is_ram(unsigned long pfn) return 0; } -#undef PFN_UP -#undef PFN_DOWN -#undef PFN_PHYS -#undef PFN_MAX - void __init setup_arch(char **cmdline_p) { diff --git a/arch/alpha/mm/numa.c b/arch/alpha/mm/numa.c index 6d5251254f6..bf6b65c81be 100644 --- a/arch/alpha/mm/numa.c +++ b/arch/alpha/mm/numa.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include @@ -27,9 +28,6 @@ bootmem_data_t node_bdata[MAX_NUMNODES]; #define DBGDCONT(args...) #endif -#define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT) -#define PFN_DOWN(x) ((x) >> PAGE_SHIFT) -#define PFN_PHYS(x) ((x) << PAGE_SHIFT) #define for_each_mem_cluster(memdesc, cluster, i) \ for ((cluster) = (memdesc)->cluster, (i) = 0; \ (i) < (memdesc)->numclusters; (i)++, (cluster)++) diff --git a/arch/arm26/mm/init.c b/arch/arm26/mm/init.c index e3ecaa45374..7da8a520567 100644 --- a/arch/arm26/mm/init.c +++ b/arch/arm26/mm/init.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include @@ -101,12 +102,6 @@ struct node_info { int bootmap_pages; }; -#define PFN_DOWN(x) ((x) >> PAGE_SHIFT) -#define PFN_UP(x) (PAGE_ALIGN(x) >> PAGE_SHIFT) -#define PFN_SIZE(x) ((x) >> PAGE_SHIFT) -#define PFN_RANGE(s,e) PFN_SIZE(PAGE_ALIGN((unsigned long)(e)) - \ - (((unsigned long)(s)) & PAGE_MASK)) - /* * FIXME: We really want to avoid allocating the bootmap bitmap * over the top of the initrd. Hopefully, this is located towards diff --git a/arch/cris/kernel/setup.c b/arch/cris/kernel/setup.c index 1ba57efff60..619a6eefd89 100644 --- a/arch/cris/kernel/setup.c +++ b/arch/cris/kernel/setup.c @@ -18,6 +18,7 @@ #include #include #include +#include #include @@ -88,10 +89,6 @@ setup_arch(char **cmdline_p) init_mm.end_data = (unsigned long) &_edata; init_mm.brk = (unsigned long) &_end; -#define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT) -#define PFN_DOWN(x) ((x) >> PAGE_SHIFT) -#define PFN_PHYS(x) ((x) << PAGE_SHIFT) - /* min_low_pfn points to the start of DRAM, start_pfn points * to the first DRAM pages after the kernel, and max_low_pfn * to the end of DRAM. diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c index 6917daa159a..8c08660b4e5 100644 --- a/arch/i386/kernel/setup.c +++ b/arch/i386/kernel/setup.c @@ -46,6 +46,7 @@ #include #include #include +#include #include