From 3a4d5c94e959359ece6d6b55045c3f046677f55c Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Thu, 14 Jan 2010 06:17:27 +0000 Subject: vhost_net: a kernel-level virtio server What it is: vhost net is a character device that can be used to reduce the number of system calls involved in virtio networking. Existing virtio net code is used in the guest without modification. There's similarity with vringfd, with some differences and reduced scope - uses eventfd for signalling - structures can be moved around in memory at any time (good for migration, bug work-arounds in userspace) - write logging is supported (good for migration) - support memory table and not just an offset (needed for kvm) common virtio related code has been put in a separate file vhost.c and can be made into a separate module if/when more backends appear. I used Rusty's lguest.c as the source for developing this part : this supplied me with witty comments I wouldn't be able to write myself. What it is not: vhost net is not a bus, and not a generic new system call. No assumptions are made on how guest performs hypercalls. Userspace hypervisors are supported as well as kvm. How it works: Basically, we connect virtio frontend (configured by userspace) to a backend. The backend could be a network device, or a tap device. Backend is also configured by userspace, including vlan/mac etc. Status: This works for me, and I haven't see any crashes. Compared to userspace, people reported improved latency (as I save up to 4 system calls per packet), as well as better bandwidth and CPU utilization. Features that I plan to look at in the future: - mergeable buffers - zero copy - scalability tuning: figure out the best threading model to use Note on RCU usage (this is also documented in vhost.h, near private_pointer which is the value protected by this variant of RCU): what is happening is that the rcu_dereference() is being used in a workqueue item. The role of rcu_read_lock() is taken on by the start of execution of the workqueue item, of rcu_read_unlock() by the end of execution of the workqueue item, and of synchronize_rcu() by flush_workqueue()/flush_work(). In the future we might need to apply some gcc attribute or sparse annotation to the function passed to INIT_WORK(). Paul's ack below is for this RCU usage. (Includes fixes by Alan Cox , David L Stevens , Chris Wright ) Acked-by: Rusty Russell Acked-by: Arnd Bergmann Acked-by: "Paul E. McKenney" Signed-off-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- arch/ia64/kvm/Kconfig | 1 + arch/powerpc/kvm/Kconfig | 1 + arch/s390/kvm/Kconfig | 1 + arch/x86/kvm/Kconfig | 1 + 4 files changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/ia64/kvm/Kconfig b/arch/ia64/kvm/Kconfig index ef3e7be29ca..01c75797119 100644 --- a/arch/ia64/kvm/Kconfig +++ b/arch/ia64/kvm/Kconfig @@ -47,6 +47,7 @@ config KVM_INTEL Provides support for KVM on Itanium 2 processors equipped with the VT extensions. +source drivers/vhost/Kconfig source drivers/virtio/Kconfig endif # VIRTUALIZATION diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig index 07703f72330..e28841fbfb8 100644 --- a/arch/powerpc/kvm/Kconfig +++ b/arch/powerpc/kvm/Kconfig @@ -75,6 +75,7 @@ config KVM_E500 If unsure, say N. +source drivers/vhost/Kconfig source drivers/virtio/Kconfig endif # VIRTUALIZATION diff --git a/arch/s390/kvm/Kconfig b/arch/s390/kvm/Kconfig index 6ee55ae84ce..a7251580891 100644 --- a/arch/s390/kvm/Kconfig +++ b/arch/s390/kvm/Kconfig @@ -35,6 +35,7 @@ config KVM # OK, it's a little counter-intuitive to do this, but it puts it neatly under # the virtualization menu. +source drivers/vhost/Kconfig source drivers/virtio/Kconfig endif # VIRTUALIZATION diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig index 4cd49833246..3c4d0109ad2 100644 --- a/arch/x86/kvm/Kconfig +++ b/arch/x86/kvm/Kconfig @@ -65,6 +65,7 @@ config KVM_AMD # OK, it's a little counter-intuitive to do this, but it puts it neatly under # the virtualization menu. +source drivers/vhost/Kconfig source drivers/lguest/Kconfig source drivers/virtio/Kconfig -- cgit v1.2.3-18-g5258 From d03e067778104911cc02cb92dd152df2f3b988a5 Mon Sep 17 00:00:00 2001 From: Liu Yu-B13201 Date: Wed, 13 Jan 2010 22:13:16 +0000 Subject: dts/mpc8569mds: Cleanup tbi phy to support rtbi After these change, when need to work in rtbi mode, just change phy-connection-type to "rtbi". Also, this work can be done by u-boot. Signed-off-by: Liu Yu Signed-off-by: David S. Miller --- arch/powerpc/boot/dts/mpc8569mds.dts | 47 ++++++++++++++++++++++++++++++++---- 1 file changed, 42 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts index 795eb362fcf..8b72eaff5b0 100644 --- a/arch/powerpc/boot/dts/mpc8569mds.dts +++ b/arch/powerpc/boot/dts/mpc8569mds.dts @@ -535,6 +535,7 @@ rx-clock-name = "none"; tx-clock-name = "clk12"; pio-handle = <&pio1>; + tbi-handle = <&tbi1>; phy-handle = <&qe_phy0>; phy-connection-type = "rgmii-id"; }; @@ -579,7 +580,7 @@ reg = <0x6>; device_type = "ethernet-phy"; }; - tbi-phy@11 { + tbi1: tbi-phy@11 { reg = <0x11>; device_type = "tbi-phy"; }; @@ -590,7 +591,7 @@ reg = <0x3520 0x18>; compatible = "fsl,ucc-mdio"; - tbi0: tbi-phy@15 { + tbi6: tbi-phy@15 { reg = <0x15>; device_type = "tbi-phy"; }; @@ -600,7 +601,7 @@ #size-cells = <0>; reg = <0x3720 0x38>; compatible = "fsl,ucc-mdio"; - tbi1: tbi-phy@17 { + tbi8: tbi-phy@17 { reg = <0x17>; device_type = "tbi-phy"; }; @@ -617,10 +618,22 @@ rx-clock-name = "none"; tx-clock-name = "clk12"; pio-handle = <&pio3>; + tbi-handle = <&tbi3>; phy-handle = <&qe_phy2>; phy-connection-type = "rgmii-id"; }; + mdio@2320 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2320 0x18>; + compatible = "fsl,ucc-mdio"; + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + enet1: ucc@3000 { device_type = "network"; compatible = "ucc_geth"; @@ -632,10 +645,22 @@ rx-clock-name = "none"; tx-clock-name = "clk17"; pio-handle = <&pio2>; + tbi-handle = <&tbi2>; phy-handle = <&qe_phy1>; phy-connection-type = "rgmii-id"; }; + mdio@3120 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3120 0x18>; + compatible = "fsl,ucc-mdio"; + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + enet3: ucc@3200 { device_type = "network"; compatible = "ucc_geth"; @@ -647,10 +672,22 @@ rx-clock-name = "none"; tx-clock-name = "clk17"; pio-handle = <&pio4>; + tbi-handle = <&tbi4>; phy-handle = <&qe_phy3>; phy-connection-type = "rgmii-id"; }; + mdio@3320 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3320 0x18>; + compatible = "fsl,ucc-mdio"; + tbi4: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + enet5: ucc@3400 { device_type = "network"; compatible = "ucc_geth"; @@ -661,7 +698,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock-name = "none"; tx-clock-name = "none"; - tbi-handle = <&tbi0>; + tbi-handle = <&tbi6>; phy-handle = <&qe_phy5>; phy-connection-type = "sgmii"; }; @@ -676,7 +713,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock-name = "none"; tx-clock-name = "none"; - tbi-handle = <&tbi1>; + tbi-handle = <&tbi8>; phy-handle = <&qe_phy7>; phy-connection-type = "sgmii"; }; -- cgit v1.2.3-18-g5258 From c1fb8340d7a39346c08ec4b1db4fb432f02acd4c Mon Sep 17 00:00:00 2001 From: Liu Yu-B13201 Date: Wed, 13 Jan 2010 22:13:17 +0000 Subject: mpc8569mds: Add bscr setting for rtbi mode Signed-off-by: Liu Yu Signed-off-by: David S. Miller --- arch/powerpc/platforms/85xx/mpc85xx_mds.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index 21f61b8c445..04ed2156db1 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -237,6 +237,8 @@ static void __init mpc85xx_mds_setup_arch(void) } else if (machine_is(mpc8569_mds)) { #define BCSR7_UCC12_GETHnRST (0x1 << 2) #define BCSR8_UEM_MARVELL_RST (0x1 << 1) +#define BCSR_UCC_RGMII (0x1 << 6) +#define BCSR_UCC_RTBI (0x1 << 5) /* * U-Boot mangles interrupt polarity for Marvell PHYs, * so reset built-in and UEM Marvell PHYs, this puts @@ -247,6 +249,28 @@ static void __init mpc85xx_mds_setup_arch(void) setbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST); clrbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST); + + for (np = NULL; (np = of_find_compatible_node(np, + "network", + "ucc_geth")) != NULL;) { + const unsigned int *prop; + int ucc_num; + + prop = of_get_property(np, "cell-index", NULL); + if (prop == NULL) + continue; + + ucc_num = *prop - 1; + + prop = of_get_property(np, "phy-connection-type", NULL); + if (prop == NULL) + continue; + + if (strcmp("rtbi", (const char *)prop) == 0) + clrsetbits_8(&bcsr_regs[7 + ucc_num], + BCSR_UCC_RGMII, BCSR_UCC_RTBI); + } + } iounmap(bcsr_regs); } -- cgit v1.2.3-18-g5258 From c1596b75c29eb5b32c65ef1e186c8b08c289bf05 Mon Sep 17 00:00:00 2001 From: Hamish Guthrie Date: Thu, 28 Jan 2010 12:54:09 +0100 Subject: ps3_gelic_wireless: Remove PS3 gelic legacy wpa support The current PS3 gelic wireless driver has support for wireless extensions. The original PS3 gelic wireless driver exposed a dedicated API for a dedicated wpa_supplicant driver. This old API could be enabled with CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE, however, as this is not being used by any distros, and it is being removed from the driver and from wpa_supplicant. Signed-off-by: Hamish Guthrie Acked-by: Geoff Levand Signed-off-by: John W. Linville --- arch/powerpc/configs/ppc64_defconfig | 1 - arch/powerpc/configs/ps3_defconfig | 1 - 2 files changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index 25240182457..070587ae4f7 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -1000,7 +1000,6 @@ CONFIG_TIGON3=y CONFIG_SPIDER_NET=m CONFIG_GELIC_NET=m CONFIG_GELIC_WIRELESS=y -# CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig index 7de127e4cee..32f7058bb17 100644 --- a/arch/powerpc/configs/ps3_defconfig +++ b/arch/powerpc/configs/ps3_defconfig @@ -593,7 +593,6 @@ CONFIG_MII=m CONFIG_NETDEV_1000=y CONFIG_GELIC_NET=y CONFIG_GELIC_WIRELESS=y -# CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE is not set # CONFIG_NETDEV_10000 is not set # -- cgit v1.2.3-18-g5258 From 4cd24eaf0c6ee7f0242e34ee77ec899f255e66b5 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Mon, 8 Feb 2010 04:30:35 +0000 Subject: net: use netdev_mc_count and netdev_mc_empty when appropriate This patch replaces dev->mc_count in all drivers (hopefully I didn't miss anything). Used spatch and did small tweaks and conding style changes when it was suitable. Jirka Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- arch/xtensa/platforms/iss/network.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/xtensa/platforms/iss/network.c b/arch/xtensa/platforms/iss/network.c index 2f0b86b37cf..87e218f98ef 100644 --- a/arch/xtensa/platforms/iss/network.c +++ b/arch/xtensa/platforms/iss/network.c @@ -560,7 +560,7 @@ static void iss_net_set_multicast_list(struct net_device *dev) #if 0 if (dev->flags & IFF_PROMISC) return; - else if (dev->mc_count) + else if (!netdev_mc_empty(dev)) dev->flags |= IFF_ALLMULTI; else dev->flags &= ~IFF_ALLMULTI; -- cgit v1.2.3-18-g5258 From 177867ce08f2756fa361e37086fc1792d7b4cf29 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 16 Feb 2010 15:23:23 -0800 Subject: sparc64: Kill bogus ip_tables.h include. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixes the following build failure: CC arch/sparc/kernel/sys_sparc32.o In file included from include/linux/netfilter_ipv4/ip_tables.h:28, from arch/sparc/kernel/sys_sparc32.c:46: include/linux/netfilter/x_tables.h:525: error: expected declaration specifiers or ‘...’ before ‘nf_hookfn’ Signed-off-by: David S. Miller --- arch/sparc/kernel/sys_sparc32.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc/kernel/sys_sparc32.c b/arch/sparc/kernel/sys_sparc32.c index dc0ac197e7e..daded3b9639 100644 --- a/arch/sparc/kernel/sys_sparc32.c +++ b/arch/sparc/kernel/sys_sparc32.c @@ -43,7 +43,6 @@ #include #include #include -#include #include #include -- cgit v1.2.3-18-g5258