From 463ce0e103f419f51b1769111e73fe8bb305d0ec Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 23 Nov 2005 17:56:06 +1100 Subject: [PATCH] powerpc: serial port discovery (#2) This moves the discovery of legacy serial ports to a separate file, makes it common to ppc32 and ppc64, and reworks it to use the new OF address translators to get to the ports early. This new version can also detect some PCI serial cards using legacy chips and will probably match those discovered port with the default console choice. Only ppc64 gets udbg still yet, unifying udbg isn't finished yet. It also adds some speed-probing code to udbg so that the default console can come up at the same speed it was set to by the firmware. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/Makefile | 9 +- arch/powerpc/kernel/legacy_serial.c | 478 +++++++++++++++++++++++++++++++++ arch/powerpc/kernel/pci_64.c | 15 ++ arch/powerpc/kernel/setup-common.c | 123 --------- arch/powerpc/kernel/setup_32.c | 8 + arch/powerpc/kernel/setup_64.c | 190 +------------ arch/powerpc/kernel/udbg.c | 2 +- arch/powerpc/kernel/udbg_16550.c | 63 ++++- arch/powerpc/platforms/maple/setup.c | 14 - arch/powerpc/platforms/pseries/lpar.c | 68 +++-- arch/powerpc/platforms/pseries/setup.c | 14 - arch/ppc/kernel/pci.c | 3 +- 12 files changed, 598 insertions(+), 389 deletions(-) create mode 100644 arch/powerpc/kernel/legacy_serial.c (limited to 'arch') diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index aab0ae33a42..bf3fd6f0224 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -33,10 +33,6 @@ obj-$(CONFIG_LPARCFG) += lparcfg.o obj-$(CONFIG_IBMVIO) += vio.o obj-$(CONFIG_IBMEBUS) += ibmebus.o obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o -obj-$(CONFIG_PPC_PSERIES) += udbg_16550.o -obj-$(CONFIG_PPC_MAPLE) += udbg_16550.o -udbgscc-$(CONFIG_PPC64) := udbg_scc.o -obj-$(CONFIG_PPC_PMAC) += $(udbgscc-y) obj64-$(CONFIG_PPC_MULTIPLATFORM) += nvram_64.o ifeq ($(CONFIG_PPC_MERGE),y) @@ -59,14 +55,15 @@ obj-$(CONFIG_BOOTX_TEXT) += btext.o obj-$(CONFIG_6xx) += idle_6xx.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_KPROBES) += kprobes.o - +obj-$(CONFIG_PPC_MULTIPLATFORM) += legacy_serial.o +obj64-$(CONFIG_PPC_MULTIPLATFORM) += udbg_16550.o +obj64-$(CONFIG_PPC_PMAC) += udbg_scc.o module-$(CONFIG_PPC64) += module_64.o obj-$(CONFIG_MODULES) += $(module-y) pci64-$(CONFIG_PPC64) += pci_64.o pci_dn.o pci_iommu.o \ pci_direct_iommu.o iomap.o obj-$(CONFIG_PCI) += $(pci64-y) - kexec-$(CONFIG_PPC64) := machine_kexec_64.o kexec-$(CONFIG_PPC32) := machine_kexec_32.o obj-$(CONFIG_KEXEC) += machine_kexec.o $(kexec-y) diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c new file mode 100644 index 00000000000..28ad50e424a --- /dev/null +++ b/arch/powerpc/kernel/legacy_serial.c @@ -0,0 +1,478 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#undef DEBUG + +#ifdef DEBUG +#define DBG(fmt...) do { printk(fmt); } while(0) +#else +#define DBG(fmt...) do { } while(0) +#endif + +#define MAX_LEGACY_SERIAL_PORTS 8 + +static struct plat_serial8250_port +legacy_serial_ports[MAX_LEGACY_SERIAL_PORTS+1]; +static struct legacy_serial_info { + struct device_node *np; + unsigned int speed; + unsigned int clock; + phys_addr_t taddr; +} legacy_serial_infos[MAX_LEGACY_SERIAL_PORTS]; +static unsigned int legacy_serial_count; +static int legacy_serial_console = -1; + +static int __init add_legacy_port(struct device_node *np, int want_index, + int iotype, phys_addr_t base, + phys_addr_t taddr, unsigned long irq) +{ + u32 *clk, *spd, clock; + int index; + + /* get clock freq. if present */ + clk = (u32 *)get_property(np, "clock-frequency", NULL); + clock = clk ? *clk : BASE_BAUD * 16; + + /* get default speed if present */ + spd = (u32 *)get_property(np, "current-speed", NULL); + + /* If we have a location index, then try to use it */ + if (want_index >= 0 && want_index < MAX_LEGACY_SERIAL_PORTS) + index = want_index; + else + index = legacy_serial_count; + + /* if our index is still out of range, that mean that + * array is full, we could scan for a free slot but that + * make little sense to bother, just skip the port + */ + if (index >= MAX_LEGACY_SERIAL_PORTS) + return -1; + if (index >= legacy_serial_count) + legacy_serial_count = index + 1; + + /* Check if there is a port who already claimed our slot */ + if (legacy_serial_infos[index].np != 0) { + /* if we still have some room, move it, else override */ + if (legacy_serial_count < MAX_LEGACY_SERIAL_PORTS) { + printk(KERN_INFO "Moved legacy port %d -> %d\n", + index, legacy_serial_count); + legacy_serial_ports[legacy_serial_count] = + legacy_serial_ports[index]; + legacy_serial_infos[legacy_serial_count] = + legacy_serial_infos[index]; + legacy_serial_count++; + } else { + printk(KERN_INFO "Replacing legacy port %d\n", index); + } + } + + /* Now fill the entry */ + memset(&legacy_serial_ports[index], 0, + sizeof(struct plat_serial8250_port)); + if (iotype == UPIO_PORT) + legacy_serial_ports[index].iobase = base; + else + legacy_serial_ports[index].membase = (void __iomem *)base; + legacy_serial_ports[index].iotype = iotype; + legacy_serial_ports[index].uartclk = clock; + legacy_serial_ports[index].irq = irq; + legacy_serial_ports[index].flags = ASYNC_BOOT_AUTOCONF; + legacy_serial_infos[index].taddr = taddr; + legacy_serial_infos[index].np = of_node_get(np); + legacy_serial_infos[index].clock = clock; + legacy_serial_infos[index].speed = spd ? *spd : 0; + + printk(KERN_INFO "Found legacy serial port %d for %s\n", + index, np->full_name); + printk(KERN_INFO " %s=%llx, taddr=%llx, irq=%lx, clk=%d, speed=%d\n", + (iotype == UPIO_PORT) ? "port" : "mem", + (unsigned long long)base, (unsigned long long)taddr, irq, + legacy_serial_ports[index].uartclk, + legacy_serial_infos[index].speed); + + return index; +} + +static int __init add_legacy_isa_port(struct device_node *np, + struct device_node *isa_bridge) +{ + u32 *reg; + char *typep; + int index = -1; + phys_addr_t taddr; + + /* Get the ISA port number */ + reg = (u32 *)get_property(np, "reg", NULL); + if (reg == NULL) + return -1; + + /* Verify it's an IO port, we don't support anything else */ + if (!(reg[0] & 0x00000001)) + return -1; + + /* Now look for an "ibm,aix-loc" property that gives us ordering + * if any... + */ + typep = (char *)get_property(np, "ibm,aix-loc", NULL); + + /* If we have a location index, then use it */ + if (typep && *typep == 'S') + index = simple_strtol(typep+1, NULL, 0) - 1; + + /* Translate ISA address */ + taddr = of_translate_address(np, reg); + + /* Add port, irq will be dealt with later */ + return add_legacy_port(np, index, UPIO_PORT, reg[1], taddr, NO_IRQ); + +} + +static int __init add_legacy_pci_port(struct device_node *np, + struct device_node *pci_dev) +{ + phys_addr_t addr, base; + u32 *addrp; + int iotype, index = -1; + +#if 0 + /* We only support ports that have a clock frequency properly + * encoded in the device-tree (that is have an fcode). Anything + * else can't be used that early and will be normally probed by + * the generic 8250_pci driver later on. + */ + if (get_property(np, "clock-frequency", NULL) == NULL) + return -1; +#endif + + /* Get the PCI address. Assume BAR 0 */ + addrp = of_get_pci_address(pci_dev, 0, NULL); + if (addrp == NULL) + return -1; + + /* We only support BAR 0 for now */ + iotype = (addrp[0] & 0x02000000) ? UPIO_MEM : UPIO_PORT; + addr = of_translate_address(pci_dev, addrp); + + /* Set the IO base to the same as the translated address for MMIO, + * or to the domain local IO base for PIO (it will be fixed up later) + */ + if (iotype == UPIO_MEM) + base = addr; + else + base = addrp[2]; + + /* Try to guess an index... If we have subdevices of the pci dev, + * we get to their "reg" property + */ + if (np != pci_dev) { + u32 *reg = (u32 *)get_property(np, "reg", NULL); + if (reg && (*reg < 4)) + index = legacy_serial_count + *reg; + } + + /* Add port, irq will be dealt with later. We passed a translated + * IO port value. It will be fixed up later along with the irq + */ + return add_legacy_port(np, index, iotype, base, addr, NO_IRQ); +} + +/* + * This is called very early, as part of setup_system() or eventually + * setup_arch(), basically before anything else in this file. This function + * will try to build a list of all the available 8250-compatible serial ports + * in the machine using the Open Firmware device-tree. It currently only deals + * with ISA and PCI busses but could be extended. It allows a very early boot + * console to be initialized, that list is also used later to provide 8250 with + * the machine non-PCI ports and to properly pick the default console port + */ +void __init find_legacy_serial_ports(void) +{ + struct device_node *np, *stdout; + char *path; + int index; + + DBG(" -> find_legacy_serial_port()\n"); + + /* Now find out if one of these is out firmware console */ + path = (char *)get_property(of_chosen, "linux,stdout-path", NULL); + if (path == NULL) { + DBG(" no linux,stdout-path !\n"); + return; + } + stdout = of_find_node_by_path(path); + if (stdout) { + DBG("stdout is %s\n", stdout->full_name); + } + + /* First fill our array with ISA ports */ + for (np = NULL; (np = of_find_node_by_type(np, "serial"));) { + struct device_node *isa = of_get_parent(np); + if (isa && !strcmp(isa->name, "isa")) { + index = add_legacy_isa_port(np, isa); + if (index >= 0 && np == stdout) + legacy_serial_console = index; + } + of_node_put(isa); + } + + /* Next, try to locate PCI ports */ + for (np = NULL; (np = of_find_all_nodes(np));) { + struct device_node *pci, *parent = of_get_parent(np); + if (parent && !strcmp(parent->name, "isa")) { + of_node_put(parent); + continue; + } + if (strcmp(np->name, "serial") && strcmp(np->type, "serial")) { + of_node_put(parent); + continue; + } + /* Check for known pciclass, and also check wether we have + * a device with child nodes for ports or not + */ + if (device_is_compatible(np, "pciclass,0700") || + device_is_compatible(np, "pciclass,070002")) + pci = np; + else if (device_is_compatible(parent, "pciclass,0700") || + device_is_compatible(parent, "pciclass,070002")) + pci = parent; + else { + of_node_put(parent); + continue; + } + index = add_legacy_pci_port(np, pci); + if (index >= 0 && np == stdout) + legacy_serial_console = index; + of_node_put(parent); + } + + DBG("legacy_serial_console = %d\n", legacy_serial_console); + + /* udbg is 64 bits only for now, that will change soon though ... */ +#ifdef CONFIG_PPC64 + while (legacy_serial_console >= 0) { + struct legacy_serial_info *info = + &legacy_serial_infos[legacy_serial_console]; + void __iomem *addr; + + if (info->taddr == 0) + break; + addr = ioremap(info->taddr, 0x1000); + if (addr == NULL) + break; + if (info->speed == 0) + info->speed = udbg_probe_uart_speed(addr, info->clock); + DBG("default console speed = %d\n", info->speed); + udbg_init_uart(addr, info->speed, info->clock); + break; + } +#endif /* CONFIG_PPC64 */ + + DBG(" <- find_legacy_serial_port()\n"); +} + +static struct platform_device serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = legacy_serial_ports, + }, +}; + +static void __init fixup_port_irq(int index, + struct device_node *np, + struct plat_serial8250_port *port) +{ + DBG("fixup_port_irq(%d)\n", index); + + /* Check for interrupts in that node */ + if (np->n_intrs > 0) { + port->irq = np->intrs[0].line; + DBG(" port %d (%s), irq=%d\n", + index, np->full_name, port->irq); + return; + } + + /* Check for interrupts in the parent */ + np = of_get_parent(np); + if (np == NULL) + return; + + if (np->n_intrs > 0) { + port->irq = np->intrs[0].line; + DBG(" port %d (%s), irq=%d\n", + index, np->full_name, port->irq); + } + of_node_put(np); +} + +static void __init fixup_port_pio(int index, + struct device_node *np, + struct plat_serial8250_port *port) +{ + struct pci_controller *hose; + + DBG("fixup_port_pio(%d)\n", index); + + hose = pci_find_hose_for_OF_device(np); + if (hose) { + unsigned long offset = (unsigned long)hose->io_base_virt - +#ifdef CONFIG_PPC64 + pci_io_base; +#else + isa_io_base; +#endif + DBG("port %d, IO %lx -> %lx\n", + index, port->iobase, port->iobase + offset); + port->iobase += offset; + } +} + +/* + * This is called as an arch initcall, hopefully before the PCI bus is + * probed and/or the 8250 driver loaded since we need to register our + * platform devices before 8250 PCI ones are detected as some of them + * must properly "override" the platform ones. + * + * This function fixes up the interrupt value for platform ports as it + * couldn't be done earlier before interrupt maps have been parsed. It + * also "corrects" the IO address for PIO ports for the same reason, + * since earlier, the PHBs virtual IO space wasn't assigned yet. It then + * registers all those platform ports for use by the 8250 driver when it + * finally loads. + */ +static int __init serial_dev_init(void) +{ + int i; + + if (legacy_serial_count == 0) + return -ENODEV; + + /* + * Before we register the platfrom serial devices, we need + * to fixup their interrutps and their IO ports. + */ + DBG("Fixing serial ports interrupts and IO ports ...\n"); + + for (i = 0; i < legacy_serial_count; i++) { + struct plat_serial8250_port *port = &legacy_serial_ports[i]; + struct device_node *np = legacy_serial_infos[i].np; + + if (port->irq == NO_IRQ) + fixup_port_irq(i, np, port); + if (port->iotype == UPIO_PORT) + fixup_port_pio(i, np, port); + } + + DBG("Registering platform serial ports\n"); + + return platform_device_register(&serial_device); +} +arch_initcall(serial_dev_init); + + +/* + * This is called very early, as part of console_init() (typically just after + * time_init()). This function is respondible for trying to find a good + * default console on serial ports. It tries to match the open firmware + * default output with one of the available serial console drivers, either + * one of the platform serial ports that have been probed earlier by + * find_legacy_serial_ports() or some more platform specific ones. + */ +static int __init check_legacy_serial_console(void) +{ + struct device_node *prom_stdout = NULL; + int speed = 0, offset = 0; + char *name; + u32 *spd; + + DBG(" -> check_legacy_serial_console()\n"); + + /* The user has requested a console so this is already set up. */ + if (strstr(saved_command_line, "console=")) { + DBG(" console was specified !\n"); + return -EBUSY; + } + + if (!of_chosen) { + DBG(" of_chosen is NULL !\n"); + return -ENODEV; + } + /* We are getting a weird phandle from OF ... */ + /* ... So use the full path instead */ + name = (char *)get_property(of_chosen, "linux,stdout-path", NULL); + if (name == NULL) { + DBG(" no linux,stdout-path !\n"); + return -ENODEV; + } + prom_stdout = of_find_node_by_path(name); + if (!prom_stdout) { + DBG(" can't find stdout package %s !\n", name); + return -ENODEV; + } + DBG("stdout is %s\n", prom_stdout->full_name); + + name = (char *)get_property(prom_stdout, "name", NULL); + if (!name) { + DBG(" stdout package has no name !\n"); + goto not_found; + } + spd = (u32 *)get_property(prom_stdout, "current-speed", NULL); + if (spd) + speed = *spd; + + if (0) + ; +#ifdef CONFIG_SERIAL_8250_CONSOLE + else if (strcmp(name, "serial") == 0) { + int i; + /* Look for it in probed array */ + for (i = 0; i < legacy_serial_count; i++) { + if (prom_stdout != legacy_serial_infos[i].np) + continue; + offset = i; + speed = legacy_serial_infos[i].speed; + break; + } + if (i >= legacy_serial_count) + goto not_found; + } +#endif /* CONFIG_SERIAL_8250_CONSOLE */ +#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE + else if (strcmp(name, "ch-a") == 0) + offset = 0; + else if (strcmp(name, "ch-b") == 0) + offset = 1; +#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */ + else + goto not_found; + of_node_put(prom_stdout); + + DBG("Found serial console at ttyS%d\n", offset); + + if (speed) { + static char __initdata opt[16]; + sprintf(opt, "%d", speed); + return add_preferred_console("ttyS", offset, opt); + } else + return add_preferred_console("ttyS", offset, NULL); + + not_found: + DBG("No preferred console found !\n"); + of_node_put(prom_stdout); + return -ENODEV; +} +console_initcall(check_legacy_serial_console); + diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index 8b6008ab217..9a80cdf9efe 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -1223,6 +1223,7 @@ void __devinit pcibios_fixup_device_resources(struct pci_dev *dev, } EXPORT_SYMBOL(pcibios_fixup_device_resources); + static void __devinit do_bus_setup(struct pci_bus *bus) { struct pci_dev *dev; @@ -1306,6 +1307,20 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar, *end = rsrc->end + offset; } +struct pci_controller* pci_find_hose_for_OF_device(struct device_node* node) +{ + if (!have_of) + return NULL; + while(node) { + struct pci_controller *hose, *tmp; + list_for_each_entry_safe(hose, tmp, &hose_list, list_node) + if (hose->arch_data == node) + return hose; + node = node->parent; + } + return NULL; +} + #endif /* CONFIG_PPC_MULTIPLATFORM */ diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 6088a39edc2..a6d8aebf2bc 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -294,129 +294,6 @@ struct seq_operations cpuinfo_op = { .show = show_cpuinfo, }; -#ifdef CONFIG_PPC_MULTIPLATFORM -static int __init set_preferred_console(void) -{ - struct device_node *prom_stdout = NULL; - char *name; - u32 *spd; - int offset = 0; - - DBG(" -> set_preferred_console()\n"); - - /* The user has requested a console so this is already set up. */ - if (strstr(saved_command_line, "console=")) { - DBG(" console was specified !\n"); - return -EBUSY; - } - - if (!of_chosen) { - DBG(" of_chosen is NULL !\n"); - return -ENODEV; - } - /* We are getting a weird phandle from OF ... */ - /* ... So use the full path instead */ - name = (char *)get_property(of_chosen, "linux,stdout-path", NULL); - if (name == NULL) { - DBG(" no linux,stdout-path !\n"); - return -ENODEV; - } - prom_stdout = of_find_node_by_path(name); - if (!prom_stdout) { - DBG(" can't find stdout package %s !\n", name); - return -ENODEV; - } - DBG("stdout is %s\n", prom_stdout->full_name); - - name = (char *)get_property(prom_stdout, "name", NULL); - if (!name) { - DBG(" stdout package has no name !\n"); - goto not_found; - } - spd = (u32 *)get_property(prom_stdout, "current-speed", NULL); - - if (0) - ; -#ifdef CONFIG_SERIAL_8250_CONSOLE - else if (strcmp(name, "serial") == 0) { - int i; - u32 *reg = (u32 *)get_property(prom_stdout, "reg", &i); - if (i > 8) { - switch (reg[1]) { - case 0x3f8: - offset = 0; - break; - case 0x2f8: - offset = 1; - break; - case 0x898: - offset = 2; - break; - case 0x890: - offset = 3; - break; - default: - /* We dont recognise the serial port */ - goto not_found; - } - } - } -#endif /* CONFIG_SERIAL_8250_CONSOLE */ -#ifdef CONFIG_PPC_PSERIES - else if (strcmp(name, "vty") == 0) { - u32 *reg = (u32 *)get_property(prom_stdout, "reg", NULL); - char *compat = (char *)get_property(prom_stdout, "compatible", NULL); - - if (reg && compat && (strcmp(compat, "hvterm-protocol") == 0)) { - /* Host Virtual Serial Interface */ - switch (reg[0]) { - case 0x30000000: - offset = 0; - break; - case 0x30000001: - offset = 1; - break; - default: - goto not_found; - } - of_node_put(prom_stdout); - DBG("Found hvsi console at offset %d\n", offset); - return add_preferred_console("hvsi", offset, NULL); - } else { - /* pSeries LPAR virtual console */ - of_node_put(prom_stdout); - DBG("Found hvc console\n"); - return add_preferred_console("hvc", 0, NULL); - } - } -#endif /* CONFIG_PPC_PSERIES */ -#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE - else if (strcmp(name, "ch-a") == 0) - offset = 0; - else if (strcmp(name, "ch-b") == 0) - offset = 1; -#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */ - else - goto not_found; - of_node_put(prom_stdout); - - DBG("Found serial console at ttyS%d\n", offset); - - if (spd) { - static char __initdata opt[16]; - sprintf(opt, "%d", *spd); - return add_preferred_console("ttyS", offset, opt); - } else - return add_preferred_console("ttyS", offset, NULL); - - not_found: - DBG("No preferred console found !\n"); - of_node_put(prom_stdout); - return -ENODEV; -} -console_initcall(set_preferred_console); -#endif /* CONFIG_PPC_MULTIPLATFORM */ - void __init check_for_initrd(void) { #ifdef CONFIG_BLK_DEV_INITRD diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index e5694335bf1..02baacf0436 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -39,6 +39,7 @@ #include #include #include +#include #include "setup.h" @@ -282,6 +283,13 @@ void __init setup_arch(char **cmdline_p) unflatten_device_tree(); check_for_initrd(); + + if (ppc_md.init_early) + ppc_md.init_early(); + +#ifdef CONFIG_PPC_MULTIPLATFORM + find_legacy_serial_ports(); +#endif finish_device_tree(); smp_setup_cpu_maps(); diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index e3fb78397dc..0fc442ad1d2 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -459,6 +459,15 @@ void __init setup_system(void) */ ppc_md.init_early(); + /* + * We can discover serial ports now since the above did setup the + * hash table management for us, thus ioremap works. We do that early + * so that further code can be debugged + */ +#ifdef CONFIG_PPC_MULTIPLATFORM + find_legacy_serial_ports(); +#endif + /* * "Finish" the device-tree, that is do the actual parsing of * some of the properties like the interrupt map @@ -657,187 +666,6 @@ void ppc64_terminate_msg(unsigned int src, const char *msg) printk("[terminate]%04x %s\n", src, msg); } -#ifndef CONFIG_PPC_ISERIES -/* - * This function can be used by platforms to "find" legacy serial ports. - * It works for "serial" nodes under an "isa" node, and will try to - * respect the "ibm,aix-loc" property if any. It works with up to 8 - * ports. - */ - -#define MAX_LEGACY_SERIAL_PORTS 8 -static struct plat_serial8250_port serial_ports[MAX_LEGACY_SERIAL_PORTS+1]; -static unsigned int old_serial_count; - -void __init generic_find_legacy_serial_ports(u64 *physport, - unsigned int *default_speed) -{ - struct device_node *np; - u32 *sizeprop; - - struct isa_reg_property { - u32 space; - u32 address; - u32 size; - }; - struct pci_reg_property { - struct pci_address addr; - u32 size_hi; - u32 size_lo; - }; - - DBG(" -> generic_find_legacy_serial_port()\n"); - - *physport = 0; - if (default_speed) - *default_speed = 0; - - np = of_find_node_by_path("/"); - if (!np) - return; - - /* First fill our array */ - for (np = NULL; (np = of_find_node_by_type(np, "serial"));) { - struct device_node *isa, *pci; - struct isa_reg_property *reg; - unsigned long phys_size, addr_size, io_base; - u32 *rangesp; - u32 *interrupts, *clk, *spd; - char *typep; - int index, rlen, rentsize; - - /* Ok, first check if it's under an "isa" parent */ - isa = of_get_parent(np); - if (!isa || strcmp(isa->name, "isa")) { - DBG("%s: no isa parent found\n", np->full_name); - continue; - } - - /* Now look for an "ibm,aix-loc" property that gives us ordering - * if any... - */ - typep = (char *)get_property(np, "ibm,aix-loc", NULL); - - /* Get the ISA port number */ - reg = (struct isa_reg_property *)get_property(np, "reg", NULL); - if (reg == NULL) - goto next_port; - /* We assume the interrupt number isn't translated ... */ - interrupts = (u32 *)get_property(np, "interrupts", NULL); - /* get clock freq. if present */ - clk = (u32 *)get_property(np, "clock-frequency", NULL); - /* get default speed if present */ - spd = (u32 *)get_property(np, "current-speed", NULL); - /* Default to locate at end of array */ - index = old_serial_count; /* end of the array by default */ - - /* If we have a location index, then use it */ - if (typep && *typep == 'S') { - index = simple_strtol(typep+1, NULL, 0) - 1; - /* if index is out of range, use end of array instead */ - if (index >= MAX_LEGACY_SERIAL_PORTS) - index = old_serial_count; - /* if our index is still out of range, that mean that - * array is full, we could scan for a free slot but that - * make little sense to bother, just skip the port - */ - if (index >= MAX_LEGACY_SERIAL_PORTS) - goto next_port; - if (index >= old_serial_count) - old_serial_count = index + 1; - /* Check if there is a port who already claimed our slot */ - if (serial_ports[index].iobase != 0) { - /* if we still have some room, move it, else override */ - if (old_serial_count < MAX_LEGACY_SERIAL_PORTS) { - DBG("Moved legacy port %d -> %d\n", index, - old_serial_count); - serial_ports[old_serial_count++] = - serial_ports[index]; - } else { - DBG("Replacing legacy port %d\n", index); - } - } - } - if (index >= MAX_LEGACY_SERIAL_PORTS) - goto next_port; - if (index >= old_serial_count) - old_serial_count = index + 1; - - /* Now fill the entry */ - memset(&serial_ports[index], 0, sizeof(struct plat_serial8250_port)); - serial_ports[index].uartclk = clk ? *clk : BASE_BAUD * 16; - serial_ports[index].iobase = reg->address; - serial_ports[index].irq = interrupts ? interrupts[0] : 0; - serial_ports[index].flags = ASYNC_BOOT_AUTOCONF; - - DBG("Added legacy port, index: %d, port: %x, irq: %d, clk: %d\n", - index, - serial_ports[index].iobase, - serial_ports[index].irq, - serial_ports[index].uartclk); - - /* Get phys address of IO reg for port 1 */ - if (index != 0) - goto next_port; - - pci = of_get_parent(isa); - if (!pci) { - DBG("%s: no pci parent found\n", np->full_name); - goto next_port; - } - - rangesp = (u32 *)get_property(pci, "ranges", &rlen); - if (rangesp == NULL) { - of_node_put(pci); - goto next_port; - } - rlen /= 4; - - /* we need the #size-cells of the PCI bridge node itself */ - phys_size = 1; - sizeprop = (u32 *)get_property(pci, "#size-cells", NULL); - if (sizeprop != NULL) - phys_size = *sizeprop; - /* we need the parent #addr-cells */ - addr_size = prom_n_addr_cells(pci); - rentsize = 3 + addr_size + phys_size; - io_base = 0; - for (;rlen >= rentsize; rlen -= rentsize,rangesp += rentsize) { - if (((rangesp[0] >> 24) & 0x3) != 1) - continue; /* not IO space */ - io_base = rangesp[3]; - if (addr_size == 2) - io_base = (io_base << 32) | rangesp[4]; - } - if (io_base != 0) { - *physport = io_base + reg->address; - if (default_speed && spd) - *default_speed = *spd; - } - of_node_put(pci); - next_port: - of_node_put(isa); - } - - DBG(" <- generic_find_legacy_serial_port()\n"); -} - -static struct platform_device serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = serial_ports, - }, -}; - -static int __init serial_dev_init(void) -{ - return platform_device_register(&serial_device); -} -arch_initcall(serial_dev_init); - -#endif /* CONFIG_PPC_ISERIES */ - int check_legacy_ioport(unsigned long base_port) { if (ppc_md.check_legacy_ioport == NULL) diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c index 0d878e72fc4..2e372477d22 100644 --- a/arch/powerpc/kernel/udbg.c +++ b/arch/powerpc/kernel/udbg.c @@ -99,7 +99,7 @@ static void udbg_console_write(struct console *con, const char *s, static struct console udbg_console = { .name = "udbg", .write = udbg_console_write, - .flags = CON_PRINTBUFFER, + .flags = CON_PRINTBUFFER | CON_ENABLED, .index = -1, }; diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c index 9313574ab93..50fd376446c 100644 --- a/arch/powerpc/kernel/udbg_16550.c +++ b/arch/powerpc/kernel/udbg_16550.c @@ -43,6 +43,8 @@ struct NS16550 { #define LSR_TEMT 0x40 /* Xmitter empty */ #define LSR_ERR 0x80 /* Error */ +#define LCR_DLAB 0x80 + static volatile struct NS16550 __iomem *udbg_comport; static void udbg_550_putc(unsigned char c) @@ -77,29 +79,70 @@ static unsigned char udbg_550_getc(void) return 0; } -void udbg_init_uart(void __iomem *comport, unsigned int speed) +void udbg_init_uart(void __iomem *comport, unsigned int speed, + unsigned int clock) { - u16 dll = speed ? (115200 / speed) : 12; + unsigned int dll, base_bauds = clock / 16; + + if (speed == 0) + speed = 9600; + dll = base_bauds / speed; if (comport) { udbg_comport = (struct NS16550 __iomem *)comport; out_8(&udbg_comport->lcr, 0x00); out_8(&udbg_comport->ier, 0xff); out_8(&udbg_comport->ier, 0x00); - out_8(&udbg_comport->lcr, 0x80); /* Access baud rate */ - out_8(&udbg_comport->dll, dll & 0xff); /* 1 = 115200, 2 = 57600, - 3 = 38400, 12 = 9600 baud */ - out_8(&udbg_comport->dlm, dll >> 8); /* dll >> 8 which should be zero - for fast rates; */ - out_8(&udbg_comport->lcr, 0x03); /* 8 data, 1 stop, no parity */ - out_8(&udbg_comport->mcr, 0x03); /* RTS/DTR */ - out_8(&udbg_comport->fcr ,0x07); /* Clear & enable FIFOs */ + out_8(&udbg_comport->lcr, LCR_DLAB); + out_8(&udbg_comport->dll, dll & 0xff); + out_8(&udbg_comport->dlm, dll >> 8); + /* 8 data, 1 stop, no parity */ + out_8(&udbg_comport->lcr, 0x03); + /* RTS/DTR */ + out_8(&udbg_comport->mcr, 0x03); + /* Clear & enable FIFOs */ + out_8(&udbg_comport->fcr ,0x07); udbg_putc = udbg_550_putc; udbg_getc = udbg_550_getc; udbg_getc_poll = udbg_550_getc_poll; } } +unsigned int udbg_probe_uart_speed(void __iomem *comport, unsigned int clock) +{ + unsigned int dll, dlm, divisor, prescaler, speed; + u8 old_lcr; + volatile struct NS16550 __iomem *port = comport; + + old_lcr = in_8(&port->lcr); + + /* select divisor latch registers. */ + out_8(&port->lcr, LCR_DLAB); + + /* now, read the divisor */ + dll = in_8(&port->dll); + dlm = in_8(&port->dlm); + divisor = dlm << 8 | dll; + + /* check prescaling */ + if (in_8(&port->mcr) & 0x80) + prescaler = 4; + else + prescaler = 1; + + /* restore the LCR */ + out_8(&port->lcr, old_lcr); + + /* calculate speed */ + speed = (clock / prescaler) / (divisor * 16); + + /* sanity check */ + if (speed < 9600 || speed > 115200) + speed = 9600; + + return speed; +} + #ifdef CONFIG_PPC_MAPLE void udbg_maple_real_putc(unsigned char c) { diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c index 95b2352655f..8724e031e96 100644 --- a/arch/powerpc/platforms/maple/setup.c +++ b/arch/powerpc/platforms/maple/setup.c @@ -192,20 +192,6 @@ static void __init maple_init_early(void) */ hpte_init_native(); - /* Find the serial port */ - generic_find_legacy_serial_ports(&physport, &default_speed); - - DBG("phys port addr: %lx\n", (long)physport); - - if (physport) { - void *comport; - /* Map the uart for udbg. */ - comport = (void *)ioremap(physport, 16); - udbg_init_uart(comport, default_speed); - - DBG("Hello World !\n"); - } - /* Setup interrupt mapping options */ ppc64_interrupt_controller = IC_OPEN_PIC; diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index cf1bc11b334..cc0939d4cad 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include @@ -191,7 +192,7 @@ static unsigned char udbg_getcLP(void) /* call this from early_init() for a working debug console on * vterm capable LPAR machines */ -void udbg_init_debug_lpar(void) +void __init udbg_init_debug_lpar(void) { vtermno = 0; udbg_putc = udbg_putcLP; @@ -200,63 +201,54 @@ void udbg_init_debug_lpar(void) } /* returns 0 if couldn't find or use /chosen/stdout as console */ -int find_udbg_vterm(void) +void __init find_udbg_vterm(void) { struct device_node *stdout_node; u32 *termno; char *name; - int found = 0; + int add_console; /* find the boot console from /chosen/stdout */ if (!of_chosen) - return 0; + return; name = (char *)get_property(of_chosen, "linux,stdout-path", NULL); if (name == NULL) - return 0; + return; stdout_node = of_find_node_by_path(name); if (!stdout_node) - return 0; - - /* now we have the stdout node; figure out what type of device it is. */ + return; name = (char *)get_property(stdout_node, "name", NULL); if (!name) { printk(KERN_WARNING "stdout node missing 'name' property!\n"); goto out; } + /* The user has requested a console so this is already set up. */ + add_console = !strstr(cmd_line, "console="); - if (strncmp(name, "vty", 3) == 0) { - if (device_is_compatible(stdout_node, "hvterm1")) { - termno = (u32 *)get_property(stdout_node, "reg", NULL); - if (termno) { - vtermno = termno[0]; - udbg_putc = udbg_putcLP; - udbg_getc = udbg_getcLP; - udbg_getc_poll = udbg_getc_pollLP; - found = 1; - } - } else if (device_is_compatible(stdout_node, "hvterm-protocol")) { - termno = (u32 *)get_property(stdout_node, "reg", NULL); - if (termno) { - vtermno = termno[0]; - udbg_putc = udbg_hvsi_putc; - udbg_getc = udbg_hvsi_getc; - udbg_getc_poll = udbg_hvsi_getc_poll; - found = 1; - } - } - } else if (strncmp(name, "serial", 6)) { - /* XXX fix ISA serial console */ - printk(KERN_WARNING "serial stdout on LPAR ('%s')! " - "can't print udbg messages\n", - stdout_node->full_name); - } else { - printk(KERN_WARNING "don't know how to print to stdout '%s'\n", - stdout_node->full_name); + /* Check if it's a virtual terminal */ + if (strncmp(name, "vty", 3) != 0) + goto out; + termno = (u32 *)get_property(stdout_node, "reg", NULL); + if (termno == NULL) + goto out; + vtermno = termno[0]; + + if (device_is_compatible(stdout_node, "hvterm1")) { + udbg_putc = udbg_putcLP; + udbg_getc = udbg_getcLP; + udbg_getc_poll = udbg_getc_pollLP; + if (add_console) + add_preferred_console("hvc", termno[0] & 0xff, NULL); + } else if (device_is_compatible(stdout_node, "hvterm-protocol")) { + vtermno = termno[0]; + udbg_putc = udbg_hvsi_putc; + udbg_getc = udbg_hvsi_getc; + udbg_getc_poll = udbg_hvsi_getc_poll; + if (add_console) + add_preferred_console("hvsi", termno[0] & 0xff, NULL); } - out: of_node_put(stdout_node); - return found; } void vpa_init(int cpu) diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 8a4238a3757..8828dc378c3 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -79,8 +79,6 @@ extern void find_udbg_vterm(void); extern void system_reset_fwnmi(void); /* from head.S */ extern void machine_check_fwnmi(void); /* from head.S */ -extern void generic_find_legacy_serial_ports(u64 *physport, - unsigned int *default_speed); int fwnmi_active; /* TRUE if an FWNMI handler is present */ @@ -366,10 +364,7 @@ static int pseries_set_xdabr(unsigned long dabr) */ static void __init pSeries_init_early(void) { - void *comport; int iommu_off = 0; - unsigned int default_speed; - u64 physport; DBG(" -> pSeries_init_early()\n"); @@ -383,17 +378,8 @@ static void __init pSeries_init_early(void) get_property(of_chosen, "linux,iommu-off", NULL)); } - generic_find_legacy_serial_ports(&physport, &default_speed); - if (platform_is_lpar()) find_udbg_vterm(); - else if (physport) { - /* Map the uart for udbg. */ - comport = (void *)ioremap(physport, 16); - udbg_init_uart(comport, default_speed); - - DBG("Hello World !\n"); - } if (firmware_has_feature(FW_FEATURE_DABR)) ppc_md.set_dabr = pseries_set_dabr; diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c index f7fae5f153b..0aa184112fb 100644 --- a/arch/ppc/kernel/pci.c +++ b/arch/ppc/kernel/pci.c @@ -815,8 +815,7 @@ EXPORT_SYMBOL(pci_device_to_OF_node); * to set pci_assign_all_buses to 1 and still use RTAS for PCI * config cycles. */ -struct pci_controller* -pci_find_hose_for_OF_device(struct device_node* node) +struct pci_controller* pci_find_hose_for_OF_device(struct device_node* node) { if (!have_of) return NULL; -- cgit v1.2.3-18-g5258