From 278b45b06bf721b7cf5de67a0126786c60c720e6 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Wed, 27 Jun 2012 13:40:04 +0200 Subject: ARM: Orion: DT support for IRQ and GPIO Controllers Both IRQ and GPIO controllers can now be represented in DT. The IRQ controllers are setup first, and then the GPIO controllers. Interrupts for GPIO lines are placed directly after the main interrupts in the interrupt space. Signed-off-by: Andrew Lunn Acked-by: Sebastian Hesselbarth Acked-by: Arnd Bergmann Tested-by: Josh Coombs Tested-by: Simon Baatz --- arch/arm/Kconfig | 1 + arch/arm/boot/dts/kirkwood.dtsi | 27 ++++++ arch/arm/mach-dove/irq.c | 58 +++++------ arch/arm/mach-kirkwood/board-dt.c | 3 +- arch/arm/mach-kirkwood/irq.c | 38 +++----- arch/arm/mach-mv78xx0/irq.c | 22 ++--- arch/arm/mach-orion5x/irq.c | 22 ++--- arch/arm/plat-orion/gpio.c | 166 ++++++++++++++++++++++++-------- arch/arm/plat-orion/include/plat/gpio.h | 16 ++- arch/arm/plat-orion/include/plat/irq.h | 3 +- arch/arm/plat-orion/irq.c | 40 ++++++++ 11 files changed, 264 insertions(+), 132 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a91009c6187..39bb94112a3 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1105,6 +1105,7 @@ config PLAT_ORION bool select CLKSRC_MMIO select GENERIC_IRQ_CHIP + select IRQ_DOMAIN select COMMON_CLK config PLAT_PXA diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index f95dbc190ab..cbaa7b6eb5d 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -2,6 +2,15 @@ / { compatible = "marvell,kirkwood"; + interrupt-parent = <&intc>; + + intc: interrupt-controller { + compatible = "marvell,orion-intc", "marvell,intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xf1020204 0x04>, + <0xf1020214 0x04>; + }; ocp@f1000000 { compatible = "simple-bus"; @@ -9,6 +18,24 @@ #address-cells = <1>; #size-cells = <1>; + gpio0: gpio@10100 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0x10100 0x40>; + ngpio = <32>; + interrupts = <35>, <36>, <37>, <38>; + }; + + gpio1: gpio@10140 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0x10140 0x40>; + ngpio = <18>; + interrupts = <39>, <40>, <41>; + }; + serial@12000 { compatible = "ns16550a"; reg = <0x12000 0x100>; diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c index f07fd16e0c9..9bc97a5baaa 100644 --- a/arch/arm/mach-dove/irq.c +++ b/arch/arm/mach-dove/irq.c @@ -20,22 +20,6 @@ #include #include "common.h" -static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - int irqoff; - BUG_ON(irq < IRQ_DOVE_GPIO_0_7 || irq > IRQ_DOVE_HIGH_GPIO); - - irqoff = irq <= IRQ_DOVE_GPIO_16_23 ? irq - IRQ_DOVE_GPIO_0_7 : - 3 + irq - IRQ_DOVE_GPIO_24_31; - - orion_gpio_irq_handler(irqoff << 3); - if (irq == IRQ_DOVE_HIGH_GPIO) { - orion_gpio_irq_handler(40); - orion_gpio_irq_handler(48); - orion_gpio_irq_handler(56); - } -} - static void pmu_irq_mask(struct irq_data *d) { int pin = irq_to_pmu(d->irq); @@ -90,6 +74,27 @@ static void pmu_irq_handler(unsigned int irq, struct irq_desc *desc) } } +static int __initdata gpio0_irqs[4] = { + IRQ_DOVE_GPIO_0_7, + IRQ_DOVE_GPIO_8_15, + IRQ_DOVE_GPIO_16_23, + IRQ_DOVE_GPIO_24_31, +}; + +static int __initdata gpio1_irqs[4] = { + IRQ_DOVE_HIGH_GPIO, + 0, + 0, + 0, +}; + +static int __initdata gpio2_irqs[4] = { + 0, + 0, + 0, + 0, +}; + void __init dove_init_irq(void) { int i; @@ -100,19 +105,14 @@ void __init dove_init_irq(void) /* * Initialize gpiolib for GPIOs 0-71. */ - orion_gpio_init(0, 32, DOVE_GPIO_LO_VIRT_BASE, 0, - IRQ_DOVE_GPIO_START); - irq_set_chained_handler(IRQ_DOVE_GPIO_0_7, gpio_irq_handler); - irq_set_chained_handler(IRQ_DOVE_GPIO_8_15, gpio_irq_handler); - irq_set_chained_handler(IRQ_DOVE_GPIO_16_23, gpio_irq_handler); - irq_set_chained_handler(IRQ_DOVE_GPIO_24_31, gpio_irq_handler); - - orion_gpio_init(32, 32, DOVE_GPIO_HI_VIRT_BASE, 0, - IRQ_DOVE_GPIO_START + 32); - irq_set_chained_handler(IRQ_DOVE_HIGH_GPIO, gpio_irq_handler); - - orion_gpio_init(64, 8, DOVE_GPIO2_VIRT_BASE, 0, - IRQ_DOVE_GPIO_START + 64); + orion_gpio_init(NULL, 0, 32, (void __iomem *)DOVE_GPIO_LO_VIRT_BASE, 0, + IRQ_DOVE_GPIO_START, gpio0_irqs); + + orion_gpio_init(NULL, 32, 32, (void __iomem *)DOVE_GPIO_HI_VIRT_BASE, 0, + IRQ_DOVE_GPIO_START + 32, gpio1_irqs); + + orion_gpio_init(NULL, 64, 8, (void __iomem *)DOVE_GPIO2_VIRT_BASE, 0, + IRQ_DOVE_GPIO_START + 64, gpio2_irqs); /* * Mask and clear PMU interrupts diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index edc3f8a9d45..27ac3d84016 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -18,6 +18,7 @@ #include #include #include +#include #include "common.h" static struct of_device_id kirkwood_dt_match_table[] __initdata = { @@ -84,7 +85,7 @@ DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)") /* Maintainer: Jason Cooper */ .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, + .init_irq = orion_dt_init_irq, .timer = &kirkwood_timer, .init_machine = kirkwood_dt_init, .restart = kirkwood_restart, diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c index c4c68e5b94f..720063ffa19 100644 --- a/arch/arm/mach-kirkwood/irq.c +++ b/arch/arm/mach-kirkwood/irq.c @@ -9,20 +9,23 @@ */ #include #include -#include #include -#include #include #include -#include "common.h" -static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - BUG_ON(irq < IRQ_KIRKWOOD_GPIO_LOW_0_7); - BUG_ON(irq > IRQ_KIRKWOOD_GPIO_HIGH_16_23); +static int __initdata gpio0_irqs[4] = { + IRQ_KIRKWOOD_GPIO_LOW_0_7, + IRQ_KIRKWOOD_GPIO_LOW_8_15, + IRQ_KIRKWOOD_GPIO_LOW_16_23, + IRQ_KIRKWOOD_GPIO_LOW_24_31, +}; - orion_gpio_irq_handler((irq - IRQ_KIRKWOOD_GPIO_LOW_0_7) << 3); -} +static int __initdata gpio1_irqs[4] = { + IRQ_KIRKWOOD_GPIO_HIGH_0_7, + IRQ_KIRKWOOD_GPIO_HIGH_8_15, + IRQ_KIRKWOOD_GPIO_HIGH_16_23, + 0, +}; void __init kirkwood_init_irq(void) { @@ -32,17 +35,8 @@ void __init kirkwood_init_irq(void) /* * Initialize gpiolib for GPIOs 0-49. */ - orion_gpio_init(0, 32, GPIO_LOW_VIRT_BASE, 0, - IRQ_KIRKWOOD_GPIO_START); - irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_0_7, gpio_irq_handler); - irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_8_15, gpio_irq_handler); - irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_16_23, gpio_irq_handler); - irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_24_31, gpio_irq_handler); - - orion_gpio_init(32, 18, GPIO_HIGH_VIRT_BASE, 0, - IRQ_KIRKWOOD_GPIO_START + 32); - irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_0_7, gpio_irq_handler); - irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_8_15, gpio_irq_handler); - irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_16_23, - gpio_irq_handler); + orion_gpio_init(NULL, 0, 32, (void __iomem *)GPIO_LOW_VIRT_BASE, 0, + IRQ_KIRKWOOD_GPIO_START, gpio0_irqs); + orion_gpio_init(NULL, 32, 18, (void __iomem *)GPIO_HIGH_VIRT_BASE, 0, + IRQ_KIRKWOOD_GPIO_START + 32, gpio1_irqs); } diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c index e421b701663..eff9a750bbe 100644 --- a/arch/arm/mach-mv78xx0/irq.c +++ b/arch/arm/mach-mv78xx0/irq.c @@ -9,19 +9,17 @@ */ #include #include -#include -#include #include #include #include #include "common.h" -static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - BUG_ON(irq < IRQ_MV78XX0_GPIO_0_7 || irq > IRQ_MV78XX0_GPIO_24_31); - - orion_gpio_irq_handler((irq - IRQ_MV78XX0_GPIO_0_7) << 3); -} +static int __initdata gpio0_irqs[4] = { + IRQ_MV78XX0_GPIO_0_7, + IRQ_MV78XX0_GPIO_8_15, + IRQ_MV78XX0_GPIO_16_23, + IRQ_MV78XX0_GPIO_24_31, +}; void __init mv78xx0_init_irq(void) { @@ -34,11 +32,7 @@ void __init mv78xx0_init_irq(void) * registers for core #1 are at an offset of 0x18 from those of * core #0.) */ - orion_gpio_init(0, 32, GPIO_VIRT_BASE, + orion_gpio_init(NULL, 0, 32, (void __iomem *)GPIO_VIRT_BASE, mv78xx0_core_index() ? 0x18 : 0, - IRQ_MV78XX0_GPIO_START); - irq_set_chained_handler(IRQ_MV78XX0_GPIO_0_7, gpio_irq_handler); - irq_set_chained_handler(IRQ_MV78XX0_GPIO_8_15, gpio_irq_handler); - irq_set_chained_handler(IRQ_MV78XX0_GPIO_16_23, gpio_irq_handler); - irq_set_chained_handler(IRQ_MV78XX0_GPIO_24_31, gpio_irq_handler); + IRQ_MV78XX0_GPIO_START, gpio0_irqs); } diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c index b1b45fff776..17da7091d31 100644 --- a/arch/arm/mach-orion5x/irq.c +++ b/arch/arm/mach-orion5x/irq.c @@ -11,19 +11,16 @@ */ #include #include -#include #include -#include #include #include -#include "common.h" -static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - BUG_ON(irq < IRQ_ORION5X_GPIO_0_7 || irq > IRQ_ORION5X_GPIO_24_31); - - orion_gpio_irq_handler((irq - IRQ_ORION5X_GPIO_0_7) << 3); -} +static int __initdata gpio0_irqs[4] = { + IRQ_ORION5X_GPIO_0_7, + IRQ_ORION5X_GPIO_8_15, + IRQ_ORION5X_GPIO_16_23, + IRQ_ORION5X_GPIO_24_31, +}; void __init orion5x_init_irq(void) { @@ -32,9 +29,6 @@ void __init orion5x_init_irq(void) /* * Initialize gpiolib for GPIOs 0-31. */ - orion_gpio_init(0, 32, GPIO_VIRT_BASE, 0, IRQ_ORION5X_GPIO_START); - irq_set_chained_handler(IRQ_ORION5X_GPIO_0_7, gpio_irq_handler); - irq_set_chained_handler(IRQ_ORION5X_GPIO_8_15, gpio_irq_handler); - irq_set_chained_handler(IRQ_ORION5X_GPIO_16_23, gpio_irq_handler); - irq_set_chained_handler(IRQ_ORION5X_GPIO_24_31, gpio_irq_handler); + orion_gpio_init(NULL, 0, 32, (void __iomem *)GPIO_VIRT_BASE, 0, + IRQ_ORION5X_GPIO_START, gpio0_irqs); } diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c index af95af25730..dfda74fae6f 100644 --- a/arch/arm/plat-orion/gpio.c +++ b/arch/arm/plat-orion/gpio.c @@ -8,15 +8,22 @@ * warranty of any kind, whether express or implied. */ +#define DEBUG + #include #include #include +#include #include #include #include #include #include #include +#include +#include +#include +#include /* * GPIO unit register offsets. @@ -38,6 +45,7 @@ struct orion_gpio_chip { unsigned long valid_output; int mask_offset; int secondary_irq_base; + struct irq_domain *domain; }; static void __iomem *GPIO_OUT(struct orion_gpio_chip *ochip) @@ -222,10 +230,10 @@ static int orion_gpio_to_irq(struct gpio_chip *chip, unsigned pin) struct orion_gpio_chip *ochip = container_of(chip, struct orion_gpio_chip, chip); - return ochip->secondary_irq_base + pin; + return irq_create_mapping(ochip->domain, + ochip->secondary_irq_base + pin); } - /* * Orion-specific GPIO API extensions. */ @@ -353,12 +361,10 @@ static int gpio_irq_set_type(struct irq_data *d, u32 type) int pin; u32 u; - pin = d->irq - gc->irq_base; + pin = d->hwirq - ochip->secondary_irq_base; u = readl(GPIO_IO_CONF(ochip)) & (1 << pin); if (!u) { - printk(KERN_ERR "orion gpio_irq_set_type failed " - "(irq %d, pin %d).\n", d->irq, pin); return -EINVAL; } @@ -397,17 +403,53 @@ static int gpio_irq_set_type(struct irq_data *d, u32 type) u &= ~(1 << pin); /* rising */ writel(u, GPIO_IN_POL(ochip)); } - return 0; } -void __init orion_gpio_init(int gpio_base, int ngpio, - u32 base, int mask_offset, int secondary_irq_base) +static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) +{ + struct orion_gpio_chip *ochip = irq_get_handler_data(irq); + u32 cause, type; + int i; + + if (ochip == NULL) + return; + + cause = readl(GPIO_DATA_IN(ochip)) & readl(GPIO_LEVEL_MASK(ochip)); + cause |= readl(GPIO_EDGE_CAUSE(ochip)) & readl(GPIO_EDGE_MASK(ochip)); + + for (i = 0; i < ochip->chip.ngpio; i++) { + int irq; + + irq = ochip->secondary_irq_base + i; + + if (!(cause & (1 << i))) + continue; + + type = irqd_get_trigger_type(irq_get_irq_data(irq)); + if ((type & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) { + /* Swap polarity (race with GPIO line) */ + u32 polarity; + + polarity = readl(GPIO_IN_POL(ochip)); + polarity ^= 1 << i; + writel(polarity, GPIO_IN_POL(ochip)); + } + generic_handle_irq(irq); + } +} + +void __init orion_gpio_init(struct device_node *np, + int gpio_base, int ngpio, + void __iomem *base, int mask_offset, + int secondary_irq_base, + int irqs[4]) { struct orion_gpio_chip *ochip; struct irq_chip_generic *gc; struct irq_chip_type *ct; char gc_label[16]; + int i; if (orion_gpio_chip_count == ARRAY_SIZE(orion_gpio_chips)) return; @@ -426,6 +468,10 @@ void __init orion_gpio_init(int gpio_base, int ngpio, ochip->chip.base = gpio_base; ochip->chip.ngpio = ngpio; ochip->chip.can_sleep = 0; +#ifdef CONFIG_OF + ochip->chip.of_node = np; +#endif + spin_lock_init(&ochip->lock); ochip->base = (void __iomem *)base; ochip->valid_input = 0; @@ -435,8 +481,6 @@ void __init orion_gpio_init(int gpio_base, int ngpio, gpiochip_add(&ochip->chip); - orion_gpio_chip_count++; - /* * Mask and clear GPIO interrupts. */ @@ -444,16 +488,28 @@ void __init orion_gpio_init(int gpio_base, int ngpio, writel(0, GPIO_EDGE_MASK(ochip)); writel(0, GPIO_LEVEL_MASK(ochip)); - gc = irq_alloc_generic_chip("orion_gpio_irq", 2, secondary_irq_base, + /* Setup the interrupt handlers. Each chip can have up to 4 + * interrupt handlers, with each handler dealing with 8 GPIO + * pins. */ + + for (i = 0; i < 4; i++) { + if (irqs[i]) { + irq_set_handler_data(irqs[i], ochip); + irq_set_chained_handler(irqs[i], gpio_irq_handler); + } + } + + gc = irq_alloc_generic_chip("orion_gpio_irq", 2, + secondary_irq_base, ochip->base, handle_level_irq); gc->private = ochip; - ct = gc->chip_types; ct->regs.mask = ochip->mask_offset + GPIO_LEVEL_MASK_OFF; ct->type = IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW; ct->chip.irq_mask = irq_gc_mask_clr_bit; ct->chip.irq_unmask = irq_gc_mask_set_bit; ct->chip.irq_set_type = gpio_irq_set_type; + ct->chip.name = ochip->chip.label; ct++; ct->regs.mask = ochip->mask_offset + GPIO_EDGE_MASK_OFF; @@ -464,41 +520,69 @@ void __init orion_gpio_init(int gpio_base, int ngpio, ct->chip.irq_unmask = irq_gc_mask_set_bit; ct->chip.irq_set_type = gpio_irq_set_type; ct->handler = handle_edge_irq; + ct->chip.name = ochip->chip.label; irq_setup_generic_chip(gc, IRQ_MSK(ngpio), IRQ_GC_INIT_MASK_CACHE, IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE); -} -void orion_gpio_irq_handler(int pinoff) -{ - struct orion_gpio_chip *ochip; - u32 cause, type; - int i; - - ochip = orion_gpio_chip_find(pinoff); - if (ochip == NULL) - return; - - cause = readl(GPIO_DATA_IN(ochip)) & readl(GPIO_LEVEL_MASK(ochip)); - cause |= readl(GPIO_EDGE_CAUSE(ochip)) & readl(GPIO_EDGE_MASK(ochip)); - - for (i = 0; i < ochip->chip.ngpio; i++) { - int irq; + /* Setup irq domain on top of the generic chip. */ + ochip->domain = irq_domain_add_legacy(np, + ochip->chip.ngpio, + ochip->secondary_irq_base, + ochip->secondary_irq_base, + &irq_domain_simple_ops, + ochip); + if (!ochip->domain) + panic("%s: couldn't allocate irq domain (DT).\n", + ochip->chip.label); - irq = ochip->secondary_irq_base + i; + orion_gpio_chip_count++; +} - if (!(cause & (1 << i))) - continue; +#ifdef CONFIG_OF +static void __init orion_gpio_of_init_one(struct device_node *np, + int irq_gpio_base) +{ + int ngpio, gpio_base, mask_offset; + void __iomem *base; + int ret, i; + int irqs[4]; + int secondary_irq_base; + + ret = of_property_read_u32(np, "ngpio", &ngpio); + if (ret) + goto out; + ret = of_property_read_u32(np, "mask-offset", &mask_offset); + if (ret == -EINVAL) + mask_offset = 0; + else + goto out; + base = of_iomap(np, 0); + if (!base) + goto out; + + secondary_irq_base = irq_gpio_base + (32 * orion_gpio_chip_count); + gpio_base = 32 * orion_gpio_chip_count; + + /* Get the interrupt numbers. Each chip can have up to 4 + * interrupt handlers, with each handler dealing with 8 GPIO + * pins. */ + + for (i = 0; i < 4; i++) + irqs[i] = irq_of_parse_and_map(np, i); + + orion_gpio_init(np, gpio_base, ngpio, base, mask_offset, + secondary_irq_base, irqs); + return; +out: + pr_err("%s: %s: missing mandatory property\n", __func__, np->name); +} - type = irqd_get_trigger_type(irq_get_irq_data(irq)); - if ((type & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) { - /* Swap polarity (race with GPIO line) */ - u32 polarity; +void __init orion_gpio_of_init(int irq_gpio_base) +{ + struct device_node *np; - polarity = readl(GPIO_IN_POL(ochip)); - polarity ^= 1 << i; - writel(polarity, GPIO_IN_POL(ochip)); - } - generic_handle_irq(irq); - } + for_each_compatible_node(np, NULL, "marvell,orion-gpio") + orion_gpio_of_init_one(np, irq_gpio_base); } +#endif diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/gpio.h index bec0c98ce41..81c6fc8a7b2 100644 --- a/arch/arm/plat-orion/include/plat/gpio.h +++ b/arch/arm/plat-orion/include/plat/gpio.h @@ -13,7 +13,7 @@ #include #include - +#include /* * Orion-specific GPIO API extensions. */ @@ -27,13 +27,11 @@ int orion_gpio_led_blink_set(unsigned gpio, int state, void orion_gpio_set_valid(unsigned pin, int mode); /* Initialize gpiolib. */ -void __init orion_gpio_init(int gpio_base, int ngpio, - u32 base, int mask_offset, int secondary_irq_base); - -/* - * GPIO interrupt handling. - */ -void orion_gpio_irq_handler(int irqoff); - +void __init orion_gpio_init(struct device_node *np, + int gpio_base, int ngpio, + void __iomem *base, int mask_offset, + int secondary_irq_base, + int irq[4]); +void __init orion_gpio_of_init(int irq_gpio_base); #endif diff --git a/arch/arm/plat-orion/include/plat/irq.h b/arch/arm/plat-orion/include/plat/irq.h index f05eeab9496..50547e41793 100644 --- a/arch/arm/plat-orion/include/plat/irq.h +++ b/arch/arm/plat-orion/include/plat/irq.h @@ -12,6 +12,5 @@ #define __PLAT_IRQ_H void orion_irq_init(unsigned int irq_start, void __iomem *maskaddr); - - +void __init orion_dt_init_irq(void); #endif diff --git a/arch/arm/plat-orion/irq.c b/arch/arm/plat-orion/irq.c index 2d5b9c1ef38..d751964def4 100644 --- a/arch/arm/plat-orion/irq.c +++ b/arch/arm/plat-orion/irq.c @@ -11,8 +11,12 @@ #include #include #include +#include #include +#include +#include #include +#include void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr) { @@ -32,3 +36,39 @@ void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr) irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_MASK_CACHE, IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE); } + +#ifdef CONFIG_OF +static int __init orion_add_irq_domain(struct device_node *np, + struct device_node *interrupt_parent) +{ + int i = 0, irq_gpio; + void __iomem *base; + + do { + base = of_iomap(np, i); + if (base) { + orion_irq_init(i * 32, base); + i++; + } + } while (base); + + irq_domain_add_legacy(np, i * 32, 0, 0, + &irq_domain_simple_ops, NULL); + + irq_gpio = i * 32; + orion_gpio_of_init(irq_gpio); + + return 0; +} + +static const struct of_device_id orion_irq_match[] = { + { .compatible = "marvell,orion-intc", + .data = orion_add_irq_domain, }, + {}, +}; + +void __init orion_dt_init_irq(void) +{ + of_irq_init(orion_irq_match); +} +#endif -- cgit v1.2.3-18-g5258 From 763721205eaa14f097694a3b65f87b74ba6dfe40 Mon Sep 17 00:00:00 2001 From: Michael Walle Date: Wed, 6 Jun 2012 20:30:57 +0200 Subject: ARM: kirkwood: use devicetree for orion-spi Populate the devices with auxdata to set the device names which are used by clkdev to lookup the clocks. Signed-off-by: Michael Walle Signed-off-by: Andrew Lunn --- v2: Add interrupts properties, although not used. --- arch/arm/boot/dts/kirkwood.dtsi | 10 ++++++++++ arch/arm/mach-kirkwood/board-dt.c | 8 +++++++- 2 files changed, 17 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index cbaa7b6eb5d..3aaad7d147d 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -60,6 +60,16 @@ interrupts = <53>; }; + spi@10600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + interrupts = <23>; + reg = <0x10600 0x28>; + status = "disabled"; + }; + nand@3000000 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 27ac3d84016..8f8da5d9a8d 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -26,6 +26,11 @@ static struct of_device_id kirkwood_dt_match_table[] __initdata = { { } }; +struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL), + {}, +}; + static void __init kirkwood_dt_init(void) { pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk); @@ -69,7 +74,8 @@ static void __init kirkwood_dt_init(void) if (of_machine_is_compatible("raidsonic,ib-nas62x0")) ib62x0_init(); - of_platform_populate(NULL, kirkwood_dt_match_table, NULL, NULL); + of_platform_populate(NULL, kirkwood_dt_match_table, + kirkwood_auxdata_lookup, NULL); } static const char *kirkwood_dt_board_compat[] = { -- cgit v1.2.3-18-g5258 From e91cac0a7746b2ce9d4134098678e3cc8cbf032d Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Fri, 20 Jul 2012 13:51:55 +0200 Subject: ARM: Orion: Add arch support needed for I2C via DT. The MV64XXX I2C driver needs a clock in order to calculate the baud rate factors. So add an clk to the clk tree. Also add the base DT properties for kirkwood devices. Signed-off-by: Andrew Lunn Conflicts: arch/arm/mach-kirkwood/common.c --- arch/arm/boot/dts/kirkwood.dtsi | 10 ++++++++++ arch/arm/mach-kirkwood/board-dt.c | 2 ++ arch/arm/mach-kirkwood/common.c | 2 ++ arch/arm/plat-orion/common.c | 1 + 4 files changed, 15 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 3aaad7d147d..3df24cd03c0 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -82,5 +82,15 @@ /* set partition map and/or chip-delay in board dts */ status = "disabled"; }; + + i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <29>; + clock-frequency = <100000>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 8f8da5d9a8d..24c8fdd174d 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -28,6 +28,8 @@ static struct of_device_id kirkwood_dt_match_table[] __initdata = { struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL), + OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0", + NULL), {}, }; diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index c9201539ffb..c4b64adcbfc 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -276,6 +277,7 @@ void __init kirkwood_clk_init(void) orion_clkdev_add("0", "pcie", pex0); orion_clkdev_add("1", "pcie", pex1); orion_clkdev_add(NULL, "kirkwood-i2s", audio); + orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".0", runit); /* Marvell says runit is used by SPI, UART, NAND, TWSI, ..., * so should never be gated. diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index c1793786aea..d245a87dc01 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -47,6 +47,7 @@ void __init orion_clkdev_init(struct clk *tclk) orion_clkdev_add(NULL, MV643XX_ETH_NAME ".2", tclk); orion_clkdev_add(NULL, MV643XX_ETH_NAME ".3", tclk); orion_clkdev_add(NULL, "orion_wdt", tclk); + orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".0", tclk); } /* Fill in the resources structure and link it into the platform -- cgit v1.2.3-18-g5258 From 1e7bad0f5b91150fef78d732095ca84ca4a16585 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Sun, 10 Jun 2012 15:20:06 +0200 Subject: ARM: Orion: DTify the watchdog timer. Add device tree support to the Orion watchdog timer, and enable its use in the kirkwood devices using device tree. Signed-off-by: Andrew Lunn Acked-by: Sebastian Hesselbarth Tested-by: Simon Baatz --- arch/arm/boot/dts/kirkwood.dtsi | 6 ++++++ arch/arm/mach-kirkwood/board-dt.c | 2 +- 2 files changed, 7 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 3df24cd03c0..458d137d095 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -70,6 +70,12 @@ status = "disabled"; }; + wdt@20300 { + compatible = "marvell,orion-wdt"; + reg = <0x20300 0x28>; + status = "okay"; + }; + nand@3000000 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 24c8fdd174d..aa229fc1cdc 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -30,6 +30,7 @@ struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL), OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0", NULL), + OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL), {}, }; @@ -55,7 +56,6 @@ static void __init kirkwood_dt_init(void) kirkwood_clk_init(); /* internal devices that every board has */ - kirkwood_wdt_init(); kirkwood_xor0_init(); kirkwood_xor1_init(); kirkwood_crypto_init(); -- cgit v1.2.3-18-g5258 From 97b414e119ccc7216e29c3bd62fe1a1797f21404 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Sun, 10 Jun 2012 16:45:37 +0200 Subject: ATA: sata_mv: Add device tree support Add support for instantiating this driver from device tree, and add the necassary DT information to the kirkwood.dtsi file. This is based on previous work by Michael Walle and Jason Cooper. Signed-off-by: Andrew Lunn Tested-by: Josh Coombs --- arch/arm/boot/dts/kirkwood.dtsi | 7 +++++++ arch/arm/mach-kirkwood/board-dt.c | 1 + 2 files changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 458d137d095..cef9616f330 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -76,6 +76,13 @@ status = "okay"; }; + sata@80000 { + compatible = "marvell,orion-sata"; + reg = <0x80000 0x5000>; + interrupts = <21>; + status = "disabled"; + }; + nand@3000000 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index aa229fc1cdc..8c67c222a0c 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -31,6 +31,7 @@ struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0", NULL), OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL), + OF_DEV_AUXDATA("marvell,orion-sata", 0xf1080000, "sata_mv.0", NULL), {}, }; -- cgit v1.2.3-18-g5258 From 9eb61f473601c047a4c0c84269d0c25493e45277 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Sat, 12 May 2012 14:57:59 +0200 Subject: ARM: Kirkwood: Add basic device tree support for QNAP TS219. The two different variants of QNAP TS devices, varying by SoC, put the GPIO keys on different GPIO lines. Hence we need two different DT board descriptions, which share the same board-ts219.c file. Signed-off-by: Andrew Lunn Acked-by: Jason Cooper --- arch/arm/boot/dts/kirkwood-ts219-6281.dts | 21 ++++++++ arch/arm/boot/dts/kirkwood-ts219-6282.dts | 21 ++++++++ arch/arm/boot/dts/kirkwood-ts219.dtsi | 74 ++++++++++++++++++++++++++ arch/arm/mach-kirkwood/Kconfig | 14 +++++ arch/arm/mach-kirkwood/Makefile | 1 + arch/arm/mach-kirkwood/Makefile.boot | 1 + arch/arm/mach-kirkwood/board-dt.c | 4 ++ arch/arm/mach-kirkwood/board-ts219.c | 87 +++++++++++++++++++++++++++++++ arch/arm/mach-kirkwood/common.h | 5 ++ 9 files changed, 228 insertions(+) create mode 100644 arch/arm/boot/dts/kirkwood-ts219-6281.dts create mode 100644 arch/arm/boot/dts/kirkwood-ts219-6282.dts create mode 100644 arch/arm/boot/dts/kirkwood-ts219.dtsi create mode 100644 arch/arm/mach-kirkwood/board-ts219.c (limited to 'arch') diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts new file mode 100644 index 00000000000..ccbf3275780 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts @@ -0,0 +1,21 @@ +/dts-v1/; + +/include/ "kirkwood-ts219.dtsi" + +/ { + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "USB Copy"; + linux,code = <133>; + gpios = <&gpio0 15 1>; + }; + button@2 { + label = "Reset"; + linux,code = <0x198>; + gpios = <&gpio0 16 1>; + }; + }; +}; \ No newline at end of file diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts new file mode 100644 index 00000000000..fbe9932161a --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts @@ -0,0 +1,21 @@ +/dts-v1/; + +/include/ "kirkwood-ts219.dtsi" + +/ { + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "USB Copy"; + linux,code = <133>; + gpios = <&gpio1 11 1>; + }; + button@2 { + label = "Reset"; + linux,code = <0x198>; + gpios = <&gpio1 5 1>; + }; + }; +}; \ No newline at end of file diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi new file mode 100644 index 00000000000..7b3f961d37d --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi @@ -0,0 +1,74 @@ +/include/ "kirkwood.dtsi" + +/ { + model = "QNAP TS219 family"; + compatible = "qnap,ts219", "mrvl,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + ocp@f1000000 { + i2c@11000 { + status = "okay"; + clock-frequency = <400000>; + + s35390a: s35390a@30 { + compatible = "s35390a"; + reg = <0x30>; + }; + }; + serial@12000 { + clock-frequency = <200000000>; + status = "okay"; + }; + serial@12100 { + clock-frequency = <200000000>; + status = "okay"; + }; + spi@10600 { + status = "okay"; + + m25p128@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p128"; + reg = <0>; + spi-max-frequency = <20000000>; + mode = <0>; + + partition@0000000 { + reg = <0x00000000 0x00080000>; + label = "U-Boot"; + }; + + partition@00200000 { + reg = <0x00200000 0x00200000>; + label = "Kernel"; + }; + + partition@00400000 { + reg = <0x00400000 0x00900000>; + label = "RootFS1"; + }; + partition@00d00000 { + reg = <0x00d00000 0x00300000>; + label = "RootFS2"; + }; + partition@00040000 { + reg = <0x00080000 0x00040000>; + label = "U-Boot Config"; + }; + partition@000c0000 { + reg = <0x000c0000 0x00140000>; + label = "NAS Config"; + }; + }; + }; + }; +}; diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 199764fe0fb..8e62fa745b9 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -80,6 +80,20 @@ config MACH_IB62X0_DT RaidSonic IB-NAS6210 & IB-NAS6220 devices, using Flattened Device Tree. +config MACH_TS219_DT + bool "Device Tree for QNAP TS-11X, TS-21X NAS" + select ARCH_KIRKWOOD_DT + select ARM_APPENDED_DTB + select ARM_ATAG_DTB_COMPAT + help + Say 'Y' here if you want your kernel to support the QNAP + TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and + TS-219P+ Turbo NAS devices using Fattened Device Tree. + There are two different Device Tree descriptions, depending + on if the device is based on an if the board uses the MV6281 + or MV6282. If you have the wrong one, the buttons will not + work. + config MACH_TS219 bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS" help diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index d2b05907b10..8b023281ec7 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -25,3 +25,4 @@ obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o obj-$(CONFIG_MACH_ICONNECT_DT) += board-iconnect.o obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o +obj-$(CONFIG_MACH_TS219_DT) += board-ts219.o tsx1x-common.o diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot index 02edbdf5b06..4a1f66a020b 100644 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ b/arch/arm/mach-kirkwood/Makefile.boot @@ -7,3 +7,4 @@ dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb +dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-qnap-ts219.dtb diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 8c67c222a0c..d0ad2503655 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -77,6 +77,9 @@ static void __init kirkwood_dt_init(void) if (of_machine_is_compatible("raidsonic,ib-nas62x0")) ib62x0_init(); + if (of_machine_is_compatible("qnap,ts219")) + qnap_dt_ts219_init(); + of_platform_populate(NULL, kirkwood_dt_match_table, kirkwood_auxdata_lookup, NULL); } @@ -87,6 +90,7 @@ static const char *kirkwood_dt_board_compat[] = { "dlink,dns-325", "iom,iconnect", "raidsonic,ib-nas62x0", + "qnap,ts219", NULL }; diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c new file mode 100644 index 00000000000..00b79eaeef5 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-ts219.c @@ -0,0 +1,87 @@ +/* + * + * QNAP TS-11x/TS-21x Turbo NAS Board Setup via DT + * + * Copyright (C) 2012 Andrew Lunn + * + * Based on the board file ts219-setup.c: + * + * Copyright (C) 2009 Martin Michlmayr + * Copyright (C) 2008 Byron Bradley + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" +#include "tsx1x-common.h" + +static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +static struct mv_sata_platform_data qnap_ts219_sata_data = { + .n_ports = 2, +}; + +static unsigned int qnap_ts219_mpp_config[] __initdata = { + MPP0_SPI_SCn, + MPP1_SPI_MOSI, + MPP2_SPI_SCK, + MPP3_SPI_MISO, + MPP4_SATA1_ACTn, + MPP5_SATA0_ACTn, + MPP8_TW0_SDA, + MPP9_TW0_SCK, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP13_UART1_TXD, /* PIC controller */ + MPP14_UART1_RXD, /* PIC controller */ + MPP15_GPIO, /* USB Copy button (on devices with 88F6281) */ + MPP16_GPIO, /* Reset button (on devices with 88F6281) */ + MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */ + MPP37_GPIO, /* Reset button (on devices with 88F6282) */ + MPP43_GPIO, /* USB Copy button (on devices with 88F6282) */ + MPP44_GPIO, /* Board ID: 0: TS-11x, 1: TS-21x */ + 0 +}; + +void __init qnap_dt_ts219_init(void) +{ + u32 dev, rev; + + kirkwood_mpp_conf(qnap_ts219_mpp_config); + + kirkwood_pcie_id(&dev, &rev); + if (dev == MV88F6282_DEV_ID) + qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); + + kirkwood_ge00_init(&qnap_ts219_ge00_data); + kirkwood_sata_init(&qnap_ts219_sata_data); + kirkwood_ehci_init(); + + pm_power_off = qnap_tsx1x_power_off; +} + +/* FIXME: Will not work with DT. Maybe use MPP40_GPIO? */ +static int __init ts219_pci_init(void) +{ + if (machine_is_ts219()) + kirkwood_pcie_init(KW_PCIE0); + + return 0; +} +subsys_initcall(ts219_pci_init); diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index 9248fa2c165..e0c23245a73 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -58,6 +58,11 @@ void dreamplug_init(void); #else static inline void dreamplug_init(void) {}; #endif +#ifdef CONFIG_MACH_TS219_DT +void qnap_dt_ts219_init(void); +#else +static inline void qnap_dt_ts219_init(void) {}; +#endif #ifdef CONFIG_MACH_DLINK_KIRKWOOD_DT void dnskw_init(void); -- cgit v1.2.3-18-g5258 From 5136b2aa622844fcff9fecf1f2c57670b890227f Mon Sep 17 00:00:00 2001 From: Josh Coombs Date: Mon, 16 Jul 2012 11:52:50 +0200 Subject: ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex Net This patch supplies the necessary DTS and supporting files to boot up a Seagate GoFlex Net with 3.5.0-rc3. Signed-off-by: Joshua Coombs Signed-off-by: Andrew Lunn --- arch/arm/boot/dts/kirkwood-goflexnet.dts | 49 ++++++++++ arch/arm/mach-kirkwood/Kconfig | 7 ++ arch/arm/mach-kirkwood/Makefile | 1 + arch/arm/mach-kirkwood/Makefile.boot | 1 + arch/arm/mach-kirkwood/board-dt.c | 5 + arch/arm/mach-kirkwood/board-goflexnet.c | 155 +++++++++++++++++++++++++++++++ arch/arm/mach-kirkwood/common.h | 6 ++ 7 files changed, 224 insertions(+) create mode 100644 arch/arm/boot/dts/kirkwood-goflexnet.dts create mode 100644 arch/arm/mach-kirkwood/board-goflexnet.c (limited to 'arch') diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts new file mode 100644 index 00000000000..c5d5a4e9f11 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts @@ -0,0 +1,49 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "Seagate GoFlex Net"; + compatible = "seagate,goflexnet", "mrvl,kirkwood-88f6281", "mrvl,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x0100000 0x400000>; + }; + + partition@500000 { + label = "pogoplug"; + reg = <0x0500000 0x2000000>; + }; + + partition@2500000 { + label = "root"; + reg = <0x02500000 0xd800000>; + }; + }; + }; +}; diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 8e62fa745b9..cb636d05f4f 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -94,6 +94,13 @@ config MACH_TS219_DT or MV6282. If you have the wrong one, the buttons will not work. +config MACH_GOFLEXNET_DT + bool "Seagate GoFlex Net (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Seagate GoFlex Net (Flattened Device Tree). + config MACH_TS219 bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS" help diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index 8b023281ec7..7153a24c302 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -26,3 +26,4 @@ obj-$(CONFIG_MACH_ICONNECT_DT) += board-iconnect.o obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o obj-$(CONFIG_MACH_TS219_DT) += board-ts219.o tsx1x-common.o +obj-$(CONFIG_MACH_GOFLEXNET_DT) += board-goflexnet.o diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot index 4a1f66a020b..c6eba8f114a 100644 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ b/arch/arm/mach-kirkwood/Makefile.boot @@ -8,3 +8,4 @@ dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-qnap-ts219.dtb +dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index d0ad2503655..87538182d3d 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -32,6 +32,7 @@ struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = { NULL), OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL), OF_DEV_AUXDATA("marvell,orion-sata", 0xf1080000, "sata_mv.0", NULL), + OF_DEV_AUXDATA("mrvl,orion-nand", 0xf4000000, "orion_nand", NULL), {}, }; @@ -80,6 +81,9 @@ static void __init kirkwood_dt_init(void) if (of_machine_is_compatible("qnap,ts219")) qnap_dt_ts219_init(); + if (of_machine_is_compatible("seagate,goflexnet")) + goflexnet_init(); + of_platform_populate(NULL, kirkwood_dt_match_table, kirkwood_auxdata_lookup, NULL); } @@ -91,6 +95,7 @@ static const char *kirkwood_dt_board_compat[] = { "iom,iconnect", "raidsonic,ib-nas62x0", "qnap,ts219", + "seagate,goflexnet", NULL }; diff --git a/arch/arm/mach-kirkwood/board-goflexnet.c b/arch/arm/mach-kirkwood/board-goflexnet.c new file mode 100644 index 00000000000..3957ece46d3 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-goflexnet.c @@ -0,0 +1,155 @@ +/* + * Copyright 2012 (C), Jason Cooper + * + * arch/arm/mach-kirkwood/board-goflexnet.c + * + * Seagate GoFlext Net Board Init for drivers not converted to + * flattened device tree yet. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Copied and modified for Seagate GoFlex Net support by + * Joshua Coombs based on ArchLinux ARM's + * GoFlex kernel patches. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data goflexnet_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct mv_sata_platform_data goflexnet_sata_data = { + .n_ports = 2, +}; + +static struct gpio_led goflexnet_led_pins[] = { + { + .name = "status:green:health", + .default_trigger = "default-on", + .gpio = 46, + .active_low = 1, + }, + { + .name = "status:orange:fault", + .default_trigger = "none", + .gpio = 47, + .active_low = 1, + }, + { + .name = "status:white:left0", + .default_trigger = "none", + .gpio = 42, + .active_low = 0, + }, + { + .name = "status:white:left1", + .default_trigger = "none", + .gpio = 43, + .active_low = 0, + }, + { + .name = "status:white:left2", + .default_trigger = "none", + .gpio = 44, + .active_low = 0, + }, + { + .name = "status:white:left3", + .default_trigger = "none", + .gpio = 45, + .active_low = 0, + }, + { + .name = "status:white:right0", + .default_trigger = "none", + .gpio = 38, + .active_low = 0, + }, + { + .name = "status:white:right1", + .default_trigger = "none", + .gpio = 39, + .active_low = 0, + }, + { + .name = "status:white:right2", + .default_trigger = "none", + .gpio = 40, + .active_low = 0, + }, + { + .name = "status:white:right3", + .default_trigger = "none", + .gpio = 41, + .active_low = 0, + }, +}; + +static struct gpio_led_platform_data goflexnet_led_data = { + .leds = goflexnet_led_pins, + .num_leds = ARRAY_SIZE(goflexnet_led_pins), +}; + +static struct platform_device goflexnet_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &goflexnet_led_data, + } +}; + +static unsigned int goflexnet_mpp_config[] __initdata = { + MPP29_GPIO, /* USB Power Enable */ + MPP47_GPIO, /* LED Orange */ + MPP46_GPIO, /* LED Green */ + MPP45_GPIO, /* LED Left Capacity 3 */ + MPP44_GPIO, /* LED Left Capacity 2 */ + MPP43_GPIO, /* LED Left Capacity 1 */ + MPP42_GPIO, /* LED Left Capacity 0 */ + MPP41_GPIO, /* LED Right Capacity 3 */ + MPP40_GPIO, /* LED Right Capacity 2 */ + MPP39_GPIO, /* LED Right Capacity 1 */ + MPP38_GPIO, /* LED Right Capacity 0 */ + 0 +}; + +void __init goflexnet_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(goflexnet_mpp_config); + + if (gpio_request(29, "USB Power Enable") != 0 || + gpio_direction_output(29, 1) != 0) + pr_err("can't setup GPIO 29 (USB Power Enable)\n"); + kirkwood_ehci_init(); + + kirkwood_ge00_init(&goflexnet_ge00_data); + kirkwood_sata_init(&goflexnet_sata_data); + + platform_device_register(&goflexnet_leds); +} diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index e0c23245a73..2fd03adbd71 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -82,6 +82,12 @@ void ib62x0_init(void); static inline void ib62x0_init(void) {}; #endif +#ifdef CONFIG_MACH_GOFLEXNET_DT +void goflexnet_init(void); +#else +static inline void goflexnet_init(void) {}; +#endif + /* early init functions not converted to fdt yet */ char *kirkwood_id(void); void kirkwood_l2_init(void); -- cgit v1.2.3-18-g5258 From 4aff38a3db1f63494812834f1fbbdb1f00579c66 Mon Sep 17 00:00:00 2001 From: Michael Walle Date: Tue, 17 Jul 2012 07:25:55 +0200 Subject: ARM: kirkwood: Add LS-XHL and LS-CHLv2 support Add support for Buffalo Linkstation LS-XHL and LS-CHLv2 using the device tree where possible. Signed-off-by: Michael Walle Signed-off-by: Andrew Lunn --- arch/arm/boot/dts/kirkwood-lschlv2.dts | 20 +++++ arch/arm/boot/dts/kirkwood-lsxhl.dts | 20 +++++ arch/arm/boot/dts/kirkwood-lsxl.dtsi | 95 +++++++++++++++++++++++ arch/arm/mach-kirkwood/Kconfig | 8 ++ arch/arm/mach-kirkwood/Makefile | 1 + arch/arm/mach-kirkwood/Makefile.boot | 2 + arch/arm/mach-kirkwood/board-dt.c | 4 + arch/arm/mach-kirkwood/board-lsxl.c | 135 +++++++++++++++++++++++++++++++++ arch/arm/mach-kirkwood/common.h | 6 ++ 9 files changed, 291 insertions(+) create mode 100644 arch/arm/boot/dts/kirkwood-lschlv2.dts create mode 100644 arch/arm/boot/dts/kirkwood-lsxhl.dts create mode 100644 arch/arm/boot/dts/kirkwood-lsxl.dtsi create mode 100644 arch/arm/mach-kirkwood/board-lsxl.c (limited to 'arch') diff --git a/arch/arm/boot/dts/kirkwood-lschlv2.dts b/arch/arm/boot/dts/kirkwood-lschlv2.dts new file mode 100644 index 00000000000..37649b58fd9 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-lschlv2.dts @@ -0,0 +1,20 @@ +/dts-v1/; + +/include/ "kirkwood-lsxl.dtsi" + +/ { + model = "Buffalo Linkstation LS-CHLv2"; + compatible = "buffalo,lschlv2", "buffalo,lsxl", "mrvl,kirkwood-88f6281", "mrvl,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x4000000>; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <166666667>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-lsxhl.dts b/arch/arm/boot/dts/kirkwood-lsxhl.dts new file mode 100644 index 00000000000..eb3c07149be --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-lsxhl.dts @@ -0,0 +1,20 @@ +/dts-v1/; + +/include/ "kirkwood-lsxl.dtsi" + +/ { + model = "Buffalo Linkstation LS-XHL"; + compatible = "buffalo,lsxhl", "buffalo,lsxl", "mrvl,kirkwood-88f6281", "mrvl,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <200000000>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi new file mode 100644 index 00000000000..8ac51c08269 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi @@ -0,0 +1,95 @@ +/include/ "kirkwood.dtsi" + +/ { + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + + spi@10600 { + status = "okay"; + + m25p40@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p40"; + reg = <0>; + spi-max-frequency = <25000000>; + mode = <0>; + + partition@0 { + reg = <0x0 0x60000>; + label = "uboot"; + read-only; + }; + + partition@60000 { + reg = <0x60000 0x10000>; + label = "dtb"; + read-only; + }; + + partition@70000 { + reg = <0x70000 0x10000>; + label = "uboot_env"; + }; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "Function Button"; + linux,code = <132>; + gpios = <&gpio1 9 1>; + }; + button@2 { + label = "Power-on Switch"; + linux,code = <116>; + gpios = <&gpio1 10 1>; + }; + button@3 { + label = "Power-auto Switch"; + linux,code = <142>; + gpios = <&gpio1 11 1>; + }; + }; + + gpio_leds { + compatible = "gpio-leds"; + + led@1 { + label = "lschlv2:blue:func"; + gpios = <&gpio1 4 1>; + }; + + led@2 { + label = "lschlv2:red:alarm"; + gpios = <&gpio1 5 1>; + }; + + led@3 { + label = "lschlv2:amber:info"; + gpios = <&gpio1 6 1>; + }; + + led@4 { + label = "lschlv2:blue:power"; + gpios = <&gpio1 7 1>; + linux,default-trigger = "default-on"; + }; + + led@5 { + label = "lschlv2:red:func"; + gpios = <&gpio1 16 1>; + }; + }; +}; diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index cb636d05f4f..ca5c15a4e62 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -101,6 +101,14 @@ config MACH_GOFLEXNET_DT Say 'Y' here if you want your kernel to support the Seagate GoFlex Net (Flattened Device Tree). +config MACH_LSXL_DT + bool "Buffalo Linkstation LS-XHL, LS-CHLv2 (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Buffalo Linkstation LS-XHL & LS-CHLv2 devices, using + Flattened Device Tree. + config MACH_TS219 bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS" help diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index 7153a24c302..055c85a1cc4 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -27,3 +27,4 @@ obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o obj-$(CONFIG_MACH_TS219_DT) += board-ts219.o tsx1x-common.o obj-$(CONFIG_MACH_GOFLEXNET_DT) += board-goflexnet.o +obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot index c6eba8f114a..2a576abf409 100644 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ b/arch/arm/mach-kirkwood/Makefile.boot @@ -9,3 +9,5 @@ dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-qnap-ts219.dtb dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb +dbt-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb +dbt-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 87538182d3d..43142cfbb7c 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -84,6 +84,9 @@ static void __init kirkwood_dt_init(void) if (of_machine_is_compatible("seagate,goflexnet")) goflexnet_init(); + if (of_machine_is_compatible("buffalo,lsxl")) + lsxl_init(); + of_platform_populate(NULL, kirkwood_dt_match_table, kirkwood_auxdata_lookup, NULL); } @@ -96,6 +99,7 @@ static const char *kirkwood_dt_board_compat[] = { "raidsonic,ib-nas62x0", "qnap,ts219", "seagate,goflexnet", + "buffalo,lsxl", NULL }; diff --git a/arch/arm/mach-kirkwood/board-lsxl.c b/arch/arm/mach-kirkwood/board-lsxl.c new file mode 100644 index 00000000000..83d8975592f --- /dev/null +++ b/arch/arm/mach-kirkwood/board-lsxl.c @@ -0,0 +1,135 @@ +/* + * Copyright 2012 (C), Michael Walle + * + * arch/arm/mach-kirkwood/board-lsxl.c + * + * Buffalo Linkstation LS-XHL and LS-CHLv2 init for drivers not + * converted to flattened device tree yet. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data lsxl_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct mv643xx_eth_platform_data lsxl_ge01_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +static unsigned int lsxl_mpp_config[] __initdata = { + MPP10_GPO, /* HDD Power Enable */ + MPP11_GPIO, /* USB Vbus Enable */ + MPP18_GPO, /* FAN High Enable# */ + MPP19_GPO, /* FAN Low Enable# */ + MPP36_GPIO, /* Function Blue LED */ + MPP37_GPIO, /* Alarm LED */ + MPP38_GPIO, /* Info LED */ + MPP39_GPIO, /* Power LED */ + MPP40_GPIO, /* Fan Lock */ + MPP41_GPIO, /* Function Button */ + MPP42_GPIO, /* Power Switch */ + MPP43_GPIO, /* Power Auto Switch */ + MPP48_GPIO, /* Function Red LED */ + 0 +}; + +#define LSXL_GPIO_FAN_HIGH 18 +#define LSXL_GPIO_FAN_LOW 19 +#define LSXL_GPIO_FAN_LOCK 40 + +static struct gpio_fan_alarm lsxl_alarm = { + .gpio = LSXL_GPIO_FAN_LOCK, +}; + +static struct gpio_fan_speed lsxl_speeds[] = { + { + .rpm = 0, + .ctrl_val = 3, + }, { + .rpm = 1500, + .ctrl_val = 1, + }, { + .rpm = 3250, + .ctrl_val = 2, + }, { + .rpm = 5000, + .ctrl_val = 0, + } +}; + +static int lsxl_gpio_list[] = { + LSXL_GPIO_FAN_HIGH, LSXL_GPIO_FAN_LOW, +}; + +static struct gpio_fan_platform_data lsxl_fan_data = { + .num_ctrl = ARRAY_SIZE(lsxl_gpio_list), + .ctrl = lsxl_gpio_list, + .alarm = &lsxl_alarm, + .num_speed = ARRAY_SIZE(lsxl_speeds), + .speed = lsxl_speeds, +}; + +static struct platform_device lsxl_fan_device = { + .name = "gpio-fan", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &lsxl_fan_data, + }, +}; + +/* + * On the LS-XHL/LS-CHLv2, the shutdown process is following: + * - Userland monitors key events until the power switch goes to off position + * - The board reboots + * - U-boot starts and goes into an idle mode waiting for the user + * to move the switch to ON position + * + */ +static void lsxl_power_off(void) +{ + kirkwood_restart('h', NULL); +} + +#define LSXL_GPIO_HDD_POWER 10 +#define LSXL_GPIO_USB_POWER 11 + +void __init lsxl_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(lsxl_mpp_config); + + /* usb and sata power on */ + gpio_set_value(LSXL_GPIO_USB_POWER, 1); + gpio_set_value(LSXL_GPIO_HDD_POWER, 1); + + kirkwood_ehci_init(); + kirkwood_ge00_init(&lsxl_ge00_data); + kirkwood_ge01_init(&lsxl_ge01_data); + platform_device_register(&lsxl_fan_device); + + /* register power-off method */ + pm_power_off = lsxl_power_off; +} diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index 2fd03adbd71..304dd1abfdc 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -88,6 +88,12 @@ void goflexnet_init(void); static inline void goflexnet_init(void) {}; #endif +#ifdef CONFIG_MACH_LSXL_DT +void lsxl_init(void); +#else +static inline void lsxl_init(void) {}; +#endif + /* early init functions not converted to fdt yet */ char *kirkwood_id(void); void kirkwood_l2_init(void); -- cgit v1.2.3-18-g5258 From be2aa95675e135eb54a32bc49b9fbe0d84d03a30 Mon Sep 17 00:00:00 2001 From: Michael Walle Date: Wed, 6 Jun 2012 20:40:30 +0200 Subject: ARM: kirkwood: use devicetree for SPI on dreamplug Use the device tree for the SPI driver and partition layout. Signed-off-by: Michael Walle Signed-off-by: Andrew Lunn --- arch/arm/boot/dts/kirkwood-dreamplug.dts | 29 ++++++++++++++++++++++ arch/arm/mach-kirkwood/board-dreamplug.c | 41 -------------------------------- 2 files changed, 29 insertions(+), 41 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts index 78b0f06a09a..ab8a8555329 100644 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -20,5 +20,34 @@ clock-frequency = <200000000>; status = "ok"; }; + + spi@10600 { + status = "okay"; + + m25p40@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l1606e"; + reg = <0>; + spi-max-frequency = <50000000>; + mode = <0>; + + partition@0 { + reg = <0x0 0x80000>; + label = "u-boot"; + }; + + partition@100000 { + reg = <0x100000 0x10000>; + label = "u-boot env"; + }; + + partition@180000 { + reg = <0x180000 0x10000>; + label = "dtb"; + }; + }; + }; }; + }; diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c index 55e357ab292..eb0e4d5ea66 100644 --- a/arch/arm/mach-kirkwood/board-dreamplug.c +++ b/arch/arm/mach-kirkwood/board-dreamplug.c @@ -14,7 +14,6 @@ #include #include #include -#include #include #include #include @@ -36,42 +35,6 @@ #include "common.h" #include "mpp.h" -struct mtd_partition dreamplug_partitions[] = { - { - .name = "u-boot", - .size = SZ_512K, - .offset = 0, - }, - { - .name = "u-boot env", - .size = SZ_64K, - .offset = SZ_512K + SZ_512K, - }, - { - .name = "dtb", - .size = SZ_64K, - .offset = SZ_512K + SZ_512K + SZ_512K, - }, -}; - -static const struct flash_platform_data dreamplug_spi_slave_data = { - .type = "mx25l1606e", - .name = "spi_flash", - .parts = dreamplug_partitions, - .nr_parts = ARRAY_SIZE(dreamplug_partitions), -}; - -static struct spi_board_info __initdata dreamplug_spi_slave_info[] = { - { - .modalias = "m25p80", - .platform_data = &dreamplug_spi_slave_data, - .irq = -1, - .max_speed_hz = 50000000, - .bus_num = 0, - .chip_select = 0, - }, -}; - static struct mv643xx_eth_platform_data dreamplug_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(0), }; @@ -137,10 +100,6 @@ void __init dreamplug_init(void) */ kirkwood_mpp_conf(dreamplug_mpp_config); - spi_register_board_info(dreamplug_spi_slave_info, - ARRAY_SIZE(dreamplug_spi_slave_info)); - kirkwood_spi_init(); - kirkwood_ehci_init(); kirkwood_ge00_init(&dreamplug_ge00_data); kirkwood_ge01_init(&dreamplug_ge01_data); -- cgit v1.2.3-18-g5258 From 2cef1a2853aece830586453296e413240961a42b Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Sun, 10 Jun 2012 16:58:11 +0200 Subject: ARM: Kirkwood: Use DT to configure SATA device. Convert boards using DT, but the old way of configuring SATA to now use properties in there DT file. Signed-off-by: Andrew Lunn Tested-by: Simon Baatz --- arch/arm/boot/dts/kirkwood-dns320.dts | 5 +++++ arch/arm/boot/dts/kirkwood-dns325.dts | 5 +++++ arch/arm/boot/dts/kirkwood-dreamplug.dts | 5 +++++ arch/arm/boot/dts/kirkwood-ib62x0.dts | 5 +++++ arch/arm/boot/dts/kirkwood-ts219.dtsi | 4 ++++ arch/arm/mach-kirkwood/board-dnskw.c | 5 ----- arch/arm/mach-kirkwood/board-dreamplug.c | 5 ----- arch/arm/mach-kirkwood/board-ib62x0.c | 5 ----- arch/arm/mach-kirkwood/board-ts219.c | 5 ----- 9 files changed, 24 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts index 9a33077130e..6fb0d7e5609 100644 --- a/arch/arm/boot/dts/kirkwood-dns320.dts +++ b/arch/arm/boot/dts/kirkwood-dns320.dts @@ -26,6 +26,11 @@ status = "okay"; }; + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + nand@3000000 { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts index 16734c1b5df..17895d92d4b 100644 --- a/arch/arm/boot/dts/kirkwood-dns325.dts +++ b/arch/arm/boot/dts/kirkwood-dns325.dts @@ -21,6 +21,11 @@ status = "okay"; }; + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + nand@3000000 { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts index ab8a8555329..d64ff7d3001 100644 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -48,6 +48,11 @@ }; }; }; + + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts index f59dcf6dc45..f7b95806643 100644 --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts @@ -21,6 +21,11 @@ status = "okay"; }; + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + nand@3000000 { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi index 7b3f961d37d..b4a789aa851 100644 --- a/arch/arm/boot/dts/kirkwood-ts219.dtsi +++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi @@ -70,5 +70,9 @@ }; }; }; + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; }; }; diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c index 58c2d68f944..179f4b363d7 100644 --- a/arch/arm/mach-kirkwood/board-dnskw.c +++ b/arch/arm/mach-kirkwood/board-dnskw.c @@ -35,10 +35,6 @@ static struct mv643xx_eth_platform_data dnskw_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; -static struct mv_sata_platform_data dnskw_sata_data = { - .n_ports = 2, -}; - static unsigned int dnskw_mpp_config[] __initdata = { MPP13_UART1_TXD, /* Custom ... */ MPP14_UART1_RXD, /* ... Controller (DNS-320 only) */ @@ -245,7 +241,6 @@ void __init dnskw_init(void) kirkwood_ehci_init(); kirkwood_ge00_init(&dnskw_ge00_data); - kirkwood_sata_init(&dnskw_sata_data); kirkwood_i2c_init(); platform_device_register(&dnskw_button_device); diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c index eb0e4d5ea66..e49439320b7 100644 --- a/arch/arm/mach-kirkwood/board-dreamplug.c +++ b/arch/arm/mach-kirkwood/board-dreamplug.c @@ -43,10 +43,6 @@ static struct mv643xx_eth_platform_data dreamplug_ge01_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(1), }; -static struct mv_sata_platform_data dreamplug_sata_data = { - .n_ports = 1, -}; - static struct mvsdio_platform_data dreamplug_mvsdio_data = { /* unfortunately the CD signal has not been connected */ }; @@ -103,7 +99,6 @@ void __init dreamplug_init(void) kirkwood_ehci_init(); kirkwood_ge00_init(&dreamplug_ge00_data); kirkwood_ge01_init(&dreamplug_ge01_data); - kirkwood_sata_init(&dreamplug_sata_data); kirkwood_sdio_init(&dreamplug_mvsdio_data); platform_device_register(&dreamplug_leds); diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c index eddf1df8891..56d198eb7ab 100644 --- a/arch/arm/mach-kirkwood/board-ib62x0.c +++ b/arch/arm/mach-kirkwood/board-ib62x0.c @@ -33,10 +33,6 @@ static struct mv643xx_eth_platform_data ib62x0_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; -static struct mv_sata_platform_data ib62x0_sata_data = { - .n_ports = 2, -}; - static unsigned int ib62x0_mpp_config[] __initdata = { MPP0_NF_IO2, MPP1_NF_IO3, @@ -132,7 +128,6 @@ void __init ib62x0_init(void) kirkwood_ehci_init(); kirkwood_ge00_init(&ib62x0_ge00_data); - kirkwood_sata_init(&ib62x0_sata_data); platform_device_register(&ib62x0_led_device); platform_device_register(&ib62x0_button_device); if (gpio_request(IB62X0_GPIO_POWER_OFF, "ib62x0:power:off") == 0 && diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c index 00b79eaeef5..1750e68506c 100644 --- a/arch/arm/mach-kirkwood/board-ts219.c +++ b/arch/arm/mach-kirkwood/board-ts219.c @@ -33,10 +33,6 @@ static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; -static struct mv_sata_platform_data qnap_ts219_sata_data = { - .n_ports = 2, -}; - static unsigned int qnap_ts219_mpp_config[] __initdata = { MPP0_SPI_SCn, MPP1_SPI_MOSI, @@ -70,7 +66,6 @@ void __init qnap_dt_ts219_init(void) qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); kirkwood_ge00_init(&qnap_ts219_ge00_data); - kirkwood_sata_init(&qnap_ts219_sata_data); kirkwood_ehci_init(); pm_power_off = qnap_tsx1x_power_off; -- cgit v1.2.3-18-g5258 From 55650d4e5b0b8de785e4682f4149951e2ce0e731 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Mon, 16 Jul 2012 12:19:34 +0200 Subject: ARM: Kirkwood: Describe DNS325 temperature sensor in DT. Now that we have I2C support in DT, describe the LM75 in the DT file for the DNS325. Signed-off-by: Andrew Lunn Signed-off-by: Jamie Lentin --- arch/arm/boot/dts/kirkwood-dns325.dts | 8 ++++++++ arch/arm/mach-kirkwood/board-dnskw.c | 15 ++------------- 2 files changed, 10 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts index 17895d92d4b..debb3703dfe 100644 --- a/arch/arm/boot/dts/kirkwood-dns325.dts +++ b/arch/arm/boot/dts/kirkwood-dns325.dts @@ -16,6 +16,14 @@ }; ocp@f1000000 { + i2c@11000 { + status = "okay"; + + lm75: lm75@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + }; serial@12000 { clock-frequency = <200000000>; status = "okay"; diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c index 179f4b363d7..1c97efa7705 100644 --- a/arch/arm/mach-kirkwood/board-dnskw.c +++ b/arch/arm/mach-kirkwood/board-dnskw.c @@ -14,7 +14,6 @@ #include #include #include -#include #include #include #include @@ -153,13 +152,6 @@ static struct platform_device dns320_led_device = { }, }; -static struct i2c_board_info dns325_i2c_board_info[] __initdata = { - { - I2C_BOARD_INFO("lm75", 0x48), - }, - /* Something at 0x0c also */ -}; - static struct gpio_keys_button dnskw_button_pins[] = { { .code = KEY_POWER, @@ -241,17 +233,14 @@ void __init dnskw_init(void) kirkwood_ehci_init(); kirkwood_ge00_init(&dnskw_ge00_data); - kirkwood_i2c_init(); platform_device_register(&dnskw_button_device); platform_device_register(&dnskw_fan_device); - if (of_machine_is_compatible("dlink,dns-325")) { - i2c_register_board_info(0, dns325_i2c_board_info, - ARRAY_SIZE(dns325_i2c_board_info)); + if (of_machine_is_compatible("dlink,dns-325")) platform_device_register(&dns325_led_device); - } else if (of_machine_is_compatible("dlink,dns-320")) + else if (of_machine_is_compatible("dlink,dns-320")) platform_device_register(&dns320_led_device); /* Register power-off GPIO. */ -- cgit v1.2.3-18-g5258 From 09059e9f29d6167511b8df0f6518e8a0b1bd4c70 Mon Sep 17 00:00:00 2001 From: Jamie Lentin Date: Thu, 19 Jul 2012 21:30:58 +0100 Subject: ARM: Kirkwood: Replace DNS-320/DNS-325 leds with dt bindings Replace code in board-dnskw with the equivalent devicetree bindings. Signed-off-by: Jamie Lentin Signed-off-by: Andrew Lunn --- arch/arm/boot/dts/kirkwood-dns320.dts | 25 ++++++++++ arch/arm/boot/dts/kirkwood-dns325.dts | 25 ++++++++++ arch/arm/mach-kirkwood/board-dnskw.c | 90 ----------------------------------- 3 files changed, 50 insertions(+), 90 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts index 6fb0d7e5609..9368382eac2 100644 --- a/arch/arm/boot/dts/kirkwood-dns320.dts +++ b/arch/arm/boot/dts/kirkwood-dns320.dts @@ -15,6 +15,31 @@ bootargs = "console=ttyS0,115200n8 earlyprintk"; }; + gpio-leds { + compatible = "gpio-leds"; + blue-power { + label = "dns320:blue:power"; + gpios = <&gpio0 26 1>; /* GPIO 26 Active Low */ + linux,default-trigger = "default-on"; + }; + blue-usb { + label = "dns320:blue:usb"; + gpios = <&gpio1 11 1>; /* GPIO 43 Active Low */ + }; + orange-l_hdd { + label = "dns320:orange:l_hdd"; + gpios = <&gpio0 28 1>; /* GPIO 28 Active Low */ + }; + orange-r_hdd { + label = "dns320:orange:r_hdd"; + gpios = <&gpio0 27 1>; /* GPIO 27 Active Low */ + }; + orange-usb { + label = "dns320:orange:usb"; + gpios = <&gpio1 3 1>; /* GPIO 35 Active Low */ + }; + }; + ocp@f1000000 { serial@12000 { clock-frequency = <166666667>; diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts index debb3703dfe..a24597044d5 100644 --- a/arch/arm/boot/dts/kirkwood-dns325.dts +++ b/arch/arm/boot/dts/kirkwood-dns325.dts @@ -15,6 +15,31 @@ bootargs = "console=ttyS0,115200n8 earlyprintk"; }; + gpio-leds { + compatible = "gpio-leds"; + white-power { + label = "dns325:white:power"; + gpios = <&gpio0 26 1>; /* GPIO 26 Active Low */ + linux,default-trigger = "default-on"; + }; + white-usb { + label = "dns325:white:usb"; + gpios = <&gpio1 11 1>; /* GPIO 43 Active Low */ + }; + red-l_hdd { + label = "dns325:red:l_hdd"; + gpios = <&gpio0 28 1>; /* GPIO 28 Active Low */ + }; + red-r_hdd { + label = "dns325:red:r_hdd"; + gpios = <&gpio0 27 1>; /* GPIO 27 Active Low */ + }; + red-usb { + label = "dns325:red:usb"; + gpios = <&gpio0 29 1>; /* GPIO 29 Active Low */ + }; + }; + ocp@f1000000 { i2c@11000 { status = "okay"; diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c index 1c97efa7705..aac9c90715c 100644 --- a/arch/arm/mach-kirkwood/board-dnskw.c +++ b/arch/arm/mach-kirkwood/board-dnskw.c @@ -68,90 +68,6 @@ static unsigned int dnskw_mpp_config[] __initdata = { 0 }; -static struct gpio_led dns325_led_pins[] = { - { - .name = "dns325:white:power", - .gpio = 26, - .active_low = 1, - .default_trigger = "default-on", - }, - { - .name = "dns325:white:usb", - .gpio = 43, - .active_low = 1, - }, - { - .name = "dns325:red:l_hdd", - .gpio = 28, - .active_low = 1, - }, - { - .name = "dns325:red:r_hdd", - .gpio = 27, - .active_low = 1, - }, - { - .name = "dns325:red:usb", - .gpio = 29, - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data dns325_led_data = { - .num_leds = ARRAY_SIZE(dns325_led_pins), - .leds = dns325_led_pins, -}; - -static struct platform_device dns325_led_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &dns325_led_data, - }, -}; - -static struct gpio_led dns320_led_pins[] = { - { - .name = "dns320:blue:power", - .gpio = 26, - .active_low = 1, - .default_trigger = "default-on", - }, - { - .name = "dns320:blue:usb", - .gpio = 43, - .active_low = 1, - }, - { - .name = "dns320:orange:l_hdd", - .gpio = 28, - .active_low = 1, - }, - { - .name = "dns320:orange:r_hdd", - .gpio = 27, - .active_low = 1, - }, - { - .name = "dns320:orange:usb", - .gpio = 35, - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data dns320_led_data = { - .num_leds = ARRAY_SIZE(dns320_led_pins), - .leds = dns320_led_pins, -}; - -static struct platform_device dns320_led_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &dns320_led_data, - }, -}; - static struct gpio_keys_button dnskw_button_pins[] = { { .code = KEY_POWER, @@ -237,12 +153,6 @@ void __init dnskw_init(void) platform_device_register(&dnskw_button_device); platform_device_register(&dnskw_fan_device); - if (of_machine_is_compatible("dlink,dns-325")) - platform_device_register(&dns325_led_device); - - else if (of_machine_is_compatible("dlink,dns-320")) - platform_device_register(&dns320_led_device); - /* Register power-off GPIO. */ if (gpio_request(36, "dnskw:power:off") == 0 && gpio_direction_output(36, 0) == 0) -- cgit v1.2.3-18-g5258 From 5b60c1453d8cf1ac39e897878cfc090181d9a229 Mon Sep 17 00:00:00 2001 From: Jamie Lentin Date: Thu, 19 Jul 2012 21:30:59 +0100 Subject: ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi A lot of device setup is shared between DNS-320 and DNS-325, move the definitions into a common include. Signed-off-by: Jamie Lentin Signed-off-by: Andrew Lunn --- arch/arm/boot/dts/kirkwood-dns320.dts | 42 +----------------------------- arch/arm/boot/dts/kirkwood-dns325.dts | 42 +----------------------------- arch/arm/boot/dts/kirkwood-dnskw.dtsi | 48 +++++++++++++++++++++++++++++++++++ 3 files changed, 50 insertions(+), 82 deletions(-) create mode 100644 arch/arm/boot/dts/kirkwood-dnskw.dtsi (limited to 'arch') diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts index 9368382eac2..5bb0bf39d3b 100644 --- a/arch/arm/boot/dts/kirkwood-dns320.dts +++ b/arch/arm/boot/dts/kirkwood-dns320.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "kirkwood.dtsi" +/include/ "kirkwood-dnskw.dtsi" / { model = "D-Link DNS-320 NAS (Rev A1)"; @@ -50,45 +50,5 @@ clock-frequency = <166666667>; status = "okay"; }; - - sata@80000 { - status = "okay"; - nr-ports = <2>; - }; - - nand@3000000 { - status = "okay"; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x100000>; - read-only; - }; - - partition@100000 { - label = "uImage"; - reg = <0x0100000 0x500000>; - }; - - partition@600000 { - label = "ramdisk"; - reg = <0x0600000 0x500000>; - }; - - partition@b00000 { - label = "image"; - reg = <0x0b00000 0x6600000>; - }; - - partition@7100000 { - label = "mini firmware"; - reg = <0x7100000 0xa00000>; - }; - - partition@7b00000 { - label = "config"; - reg = <0x7b00000 0x500000>; - }; - }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts index a24597044d5..d430713ea9b 100644 --- a/arch/arm/boot/dts/kirkwood-dns325.dts +++ b/arch/arm/boot/dts/kirkwood-dns325.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "kirkwood.dtsi" +/include/ "kirkwood-dnskw.dtsi" / { model = "D-Link DNS-325 NAS (Rev A1)"; @@ -53,45 +53,5 @@ clock-frequency = <200000000>; status = "okay"; }; - - sata@80000 { - status = "okay"; - nr-ports = <2>; - }; - - nand@3000000 { - status = "okay"; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x100000>; - read-only; - }; - - partition@100000 { - label = "uImage"; - reg = <0x0100000 0x500000>; - }; - - partition@600000 { - label = "ramdisk"; - reg = <0x0600000 0x500000>; - }; - - partition@b00000 { - label = "image"; - reg = <0x0b00000 0x6600000>; - }; - - partition@7100000 { - label = "mini firmware"; - reg = <0x7100000 0xa00000>; - }; - - partition@7b00000 { - label = "config"; - reg = <0x7b00000 0x500000>; - }; - }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi new file mode 100644 index 00000000000..067672cff32 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi @@ -0,0 +1,48 @@ +/include/ "kirkwood.dtsi" + +/ { + model = "D-Link DNS NASes (kirkwood-based)"; + compatible = "dlink,dns-kirkwood", "mrvl,kirkwood-88f6281", "mrvl,kirkwood"; + + ocp@f1000000 { + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x0100000 0x500000>; + }; + + partition@600000 { + label = "ramdisk"; + reg = <0x0600000 0x500000>; + }; + + partition@b00000 { + label = "image"; + reg = <0x0b00000 0x6600000>; + }; + + partition@7100000 { + label = "mini firmware"; + reg = <0x7100000 0xa00000>; + }; + + partition@7b00000 { + label = "config"; + reg = <0x7b00000 0x500000>; + }; + }; + }; +}; -- cgit v1.2.3-18-g5258 From bb53d8272609f13028ed7ef07a1597022db5adcd Mon Sep 17 00:00:00 2001 From: Jamie Lentin Date: Thu, 19 Jul 2012 21:31:00 +0100 Subject: ARM: Kirkwood: Describe DNS32? gpio-keys in DT. Move description of GPIO keys on both the DNS320 and DNS325 into DT. Signed-off-by: Jamie Lentin Signed-off-by: Andrew Lunn --- arch/arm/boot/dts/kirkwood-dnskw.dtsi | 21 ++++++++++++++++++++ arch/arm/mach-kirkwood/board-dnskw.c | 37 ----------------------------------- 2 files changed, 21 insertions(+), 37 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi index 067672cff32..2bad626524d 100644 --- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi +++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi @@ -4,6 +4,27 @@ model = "D-Link DNS NASes (kirkwood-based)"; compatible = "dlink,dns-kirkwood", "mrvl,kirkwood-88f6281", "mrvl,kirkwood"; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "Power button"; + linux,code = <116>; + gpios = <&gpio1 2 1>; + }; + button@2 { + label = "USB unmount button"; + linux,code = <161>; + gpios = <&gpio1 15 1>; + }; + button@3 { + label = "Reset button"; + linux,code = <0x198>; + gpios = <&gpio1 16 1>; + }; + }; + ocp@f1000000 { sata@80000 { status = "okay"; diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c index aac9c90715c..4ab35065a14 100644 --- a/arch/arm/mach-kirkwood/board-dnskw.c +++ b/arch/arm/mach-kirkwood/board-dnskw.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include #include @@ -68,41 +67,6 @@ static unsigned int dnskw_mpp_config[] __initdata = { 0 }; -static struct gpio_keys_button dnskw_button_pins[] = { - { - .code = KEY_POWER, - .gpio = 34, - .desc = "Power button", - .active_low = 1, - }, - { - .code = KEY_EJECTCD, - .gpio = 47, - .desc = "USB unmount button", - .active_low = 1, - }, - { - .code = KEY_RESTART, - .gpio = 48, - .desc = "Reset button", - .active_low = 1, - }, -}; - -static struct gpio_keys_platform_data dnskw_button_data = { - .buttons = dnskw_button_pins, - .nbuttons = ARRAY_SIZE(dnskw_button_pins), -}; - -static struct platform_device dnskw_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &dnskw_button_data, - } -}; - /* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */ static struct gpio_fan_speed dnskw_fan_speed[] = { { 0, 0 }, @@ -150,7 +114,6 @@ void __init dnskw_init(void) kirkwood_ehci_init(); kirkwood_ge00_init(&dnskw_ge00_data); - platform_device_register(&dnskw_button_device); platform_device_register(&dnskw_fan_device); /* Register power-off GPIO. */ -- cgit v1.2.3-18-g5258 From c06c7ca77c85396f19a9f364e2d10d7aa1fafaa5 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Mon, 16 Jul 2012 12:48:20 +0200 Subject: ARM: Kirkwood: Describe IB62x0 gpio-keys in DT. Now that the GPIO controllers have been converted over to DT, described the gpio-keys in DT. Signed-off-by: Andrew Lunn Tested-by: Simon Baatz --- arch/arm/boot/dts/kirkwood-ib62x0.dts | 16 ++++++++++++++++ arch/arm/mach-kirkwood/board-ib62x0.c | 31 ------------------------------- 2 files changed, 16 insertions(+), 31 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts index f7b95806643..3724687fc9c 100644 --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts @@ -46,4 +46,20 @@ }; }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "USB Copy"; + linux,code = <133>; + gpios = <&gpio0 29 1>; + }; + button@2 { + label = "Reset"; + linux,code = <0x198>; + gpios = <&gpio0 28 1>; + }; + }; }; diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c index 56d198eb7ab..f30065e50cb 100644 --- a/arch/arm/mach-kirkwood/board-ib62x0.c +++ b/arch/arm/mach-kirkwood/board-ib62x0.c @@ -18,7 +18,6 @@ #include #include #include -#include #include #include #include @@ -85,35 +84,6 @@ static struct platform_device ib62x0_led_device = { } }; -static struct gpio_keys_button ib62x0_button_pins[] = { - { - .code = KEY_COPY, - .gpio = 29, - .desc = "USB Copy", - .active_low = 1, - }, - { - .code = KEY_RESTART, - .gpio = 28, - .desc = "Reset", - .active_low = 1, - }, -}; - -static struct gpio_keys_platform_data ib62x0_button_data = { - .buttons = ib62x0_button_pins, - .nbuttons = ARRAY_SIZE(ib62x0_button_pins), -}; - -static struct platform_device ib62x0_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &ib62x0_button_data, - } -}; - static void ib62x0_power_off(void) { gpio_set_value(IB62X0_GPIO_POWER_OFF, 1); @@ -129,7 +99,6 @@ void __init ib62x0_init(void) kirkwood_ehci_init(); kirkwood_ge00_init(&ib62x0_ge00_data); platform_device_register(&ib62x0_led_device); - platform_device_register(&ib62x0_button_device); if (gpio_request(IB62X0_GPIO_POWER_OFF, "ib62x0:power:off") == 0 && gpio_direction_output(IB62X0_GPIO_POWER_OFF, 0) == 0) pm_power_off = ib62x0_power_off; -- cgit v1.2.3-18-g5258 From 157727d6490b31df45f6c1b59beb3950b82f3c21 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Tue, 17 Jul 2012 08:14:19 +0200 Subject: ARM: Kirkwood: Describe IB62x0 LEDs in DT. Signed-off-by: Andrew Lunn Tested-by: Simon Baatz --- arch/arm/boot/dts/kirkwood-ib62x0.dts | 17 +++++++++++++++++ arch/arm/mach-kirkwood/board-ib62x0.c | 36 ----------------------------------- 2 files changed, 17 insertions(+), 36 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts index 3724687fc9c..66794ed75ff 100644 --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts @@ -62,4 +62,21 @@ gpios = <&gpio0 28 1>; }; }; + gpio-leds { + compatible = "gpio-leds"; + + green-os { + label = "ib62x0:green:os"; + gpios = <&gpio0 25 0>; + linux,default-trigger = "default-on"; + }; + red-os { + label = "ib62x0:red:os"; + gpios = <&gpio0 22 0>; + }; + usb-copy { + label = "ib62x0:red:usb_copy"; + gpios = <&gpio0 27 0>; + }; + }; }; diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c index f30065e50cb..cfc47f80e73 100644 --- a/arch/arm/mach-kirkwood/board-ib62x0.c +++ b/arch/arm/mach-kirkwood/board-ib62x0.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include #include @@ -50,40 +49,6 @@ static unsigned int ib62x0_mpp_config[] __initdata = { 0 }; -static struct gpio_led ib62x0_led_pins[] = { - { - .name = "ib62x0:green:os", - .default_trigger = "default-on", - .gpio = 25, - .active_low = 0, - }, - { - .name = "ib62x0:red:os", - .default_trigger = "none", - .gpio = 22, - .active_low = 0, - }, - { - .name = "ib62x0:red:usb_copy", - .default_trigger = "none", - .gpio = 27, - .active_low = 0, - }, -}; - -static struct gpio_led_platform_data ib62x0_led_data = { - .leds = ib62x0_led_pins, - .num_leds = ARRAY_SIZE(ib62x0_led_pins), -}; - -static struct platform_device ib62x0_led_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &ib62x0_led_data, - } -}; - static void ib62x0_power_off(void) { gpio_set_value(IB62X0_GPIO_POWER_OFF, 1); @@ -98,7 +63,6 @@ void __init ib62x0_init(void) kirkwood_ehci_init(); kirkwood_ge00_init(&ib62x0_ge00_data); - platform_device_register(&ib62x0_led_device); if (gpio_request(IB62X0_GPIO_POWER_OFF, "ib62x0:power:off") == 0 && gpio_direction_output(IB62X0_GPIO_POWER_OFF, 0) == 0) pm_power_off = ib62x0_power_off; -- cgit v1.2.3-18-g5258 From 48135a66c247cfaf99611a19f4272178d3e4f1de Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Mon, 16 Jul 2012 12:54:58 +0200 Subject: ARM: Kirkwood: Describe iConnects temperature sensor in DT. Now that we have I2C support in DT, describe the LM63 in the DT file for the iConnect. Signed-off-by: Andrew Lunn --- arch/arm/boot/dts/kirkwood-iconnect.dts | 8 ++++++++ arch/arm/mach-kirkwood/board-iconnect.c | 10 ---------- 2 files changed, 8 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 026a1f82d81..1b5898eab32 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -18,6 +18,14 @@ }; ocp@f1000000 { + i2c@11000 { + status = "okay"; + + lm63: lm63@4c { + compatible = "national,lm63"; + reg = <0x4c>; + }; + }; serial@12000 { clock-frequency = <200000000>; status = "ok"; diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c index b0d3cc49269..df043aa754a 100644 --- a/arch/arm/mach-kirkwood/board-iconnect.c +++ b/arch/arm/mach-kirkwood/board-iconnect.c @@ -20,7 +20,6 @@ #include #include #include -#include #include #include #include @@ -90,12 +89,6 @@ static unsigned int iconnect_mpp_config[] __initdata = { 0 }; -static struct i2c_board_info __initdata iconnect_board_info[] = { - { - I2C_BOARD_INFO("lm63", 0x4c), - }, -}; - static struct mtd_partition iconnect_nand_parts[] = { { .name = "flash", @@ -142,9 +135,6 @@ void __init iconnect_init(void) { kirkwood_mpp_conf(iconnect_mpp_config); kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25); - kirkwood_i2c_init(); - i2c_register_board_info(0, iconnect_board_info, - ARRAY_SIZE(iconnect_board_info)); kirkwood_ehci_init(); kirkwood_ge00_init(&iconnect_ge00_data); -- cgit v1.2.3-18-g5258 From 258f367628ed2258fb1b3ba28a287a6369dd0419 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Tue, 17 Jul 2012 08:26:11 +0200 Subject: ARM: Kirkwood: Describe iConnects LEDs in DT. Signed-off-by: Andrew Lunn --- arch/arm/boot/dts/kirkwood-iconnect.dts | 34 ++++++++++++++++++++++++ arch/arm/mach-kirkwood/board-iconnect.c | 46 --------------------------------- 2 files changed, 34 insertions(+), 46 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 1b5898eab32..52d94704510 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -31,4 +31,38 @@ status = "ok"; }; }; + gpio-leds { + compatible = "gpio-leds"; + + led-level { + label = "led_level"; + gpios = <&gpio1 9 0>; + linux,default-trigger = "default-on"; + }; + power-blue { + label = "power:blue"; + gpios = <&gpio1 11 0>; + linux,default-trigger = "timer"; + }; + usb1 { + label = "usb1:blue"; + gpios = <&gpio1 12 0>; + }; + usb2 { + label = "usb2:blue"; + gpios = <&gpio1 13 0>; + }; + usb3 { + label = "usb3:blue"; + gpios = <&gpio1 14 0>; + }; + usb4 { + label = "usb4:blue"; + gpios = <&gpio1 15 0>; + }; + otb { + label = "otb:blue"; + gpios = <&gpio1 16 0>; + }; + }; }; diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c index df043aa754a..d7a9198ed30 100644 --- a/arch/arm/mach-kirkwood/board-iconnect.c +++ b/arch/arm/mach-kirkwood/board-iconnect.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include #include @@ -31,50 +30,6 @@ static struct mv643xx_eth_platform_data iconnect_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(11), }; -static struct gpio_led iconnect_led_pins[] = { - { - .name = "led_level", - .gpio = 41, - .default_trigger = "default-on", - }, { - .name = "power:blue", - .gpio = 42, - .default_trigger = "timer", - }, { - .name = "power:red", - .gpio = 43, - }, { - .name = "usb1:blue", - .gpio = 44, - }, { - .name = "usb2:blue", - .gpio = 45, - }, { - .name = "usb3:blue", - .gpio = 46, - }, { - .name = "usb4:blue", - .gpio = 47, - }, { - .name = "otb:blue", - .gpio = 48, - }, -}; - -static struct gpio_led_platform_data iconnect_led_data = { - .leds = iconnect_led_pins, - .num_leds = ARRAY_SIZE(iconnect_led_pins), - .gpio_blink_set = orion_gpio_led_blink_set, -}; - -static struct platform_device iconnect_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &iconnect_led_data, - } -}; - static unsigned int iconnect_mpp_config[] __initdata = { MPP12_GPIO, MPP35_GPIO, @@ -140,7 +95,6 @@ void __init iconnect_init(void) kirkwood_ge00_init(&iconnect_ge00_data); platform_device_register(&iconnect_button_device); - platform_device_register(&iconnect_leds); } static int __init iconnect_pci_init(void) -- cgit v1.2.3-18-g5258 From b94a257cdb115c0bc2058685b18280c9319780a3 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Tue, 17 Jul 2012 07:55:37 +0200 Subject: ARM: Kirkwood: Describe Dreamplug LEDs in DT. Signed-off-by: Andrew Lunn --- arch/arm/boot/dts/kirkwood-dreamplug.dts | 16 +++++++++++++++ arch/arm/mach-kirkwood/board-dreamplug.c | 34 -------------------------------- 2 files changed, 16 insertions(+), 34 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts index d64ff7d3001..26e281fbf6b 100644 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -55,4 +55,20 @@ }; }; + gpio-leds { + compatible = "gpio-leds"; + + bluetooth { + label = "dreamplug:blue:bluetooth"; + gpios = <&gpio1 15 1>; + }; + wifi { + label = "dreamplug:green:wifi"; + gpios = <&gpio1 16 1>; + }; + wifi-ap { + label = "dreamplug:green:wifi_ap"; + gpios = <&gpio1 17 1>; + }; + }; }; diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c index e49439320b7..aeb234d0d0e 100644 --- a/arch/arm/mach-kirkwood/board-dreamplug.c +++ b/arch/arm/mach-kirkwood/board-dreamplug.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include #include @@ -47,37 +46,6 @@ static struct mvsdio_platform_data dreamplug_mvsdio_data = { /* unfortunately the CD signal has not been connected */ }; -static struct gpio_led dreamplug_led_pins[] = { - { - .name = "dreamplug:blue:bluetooth", - .gpio = 47, - .active_low = 1, - }, - { - .name = "dreamplug:green:wifi", - .gpio = 48, - .active_low = 1, - }, - { - .name = "dreamplug:green:wifi_ap", - .gpio = 49, - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data dreamplug_led_data = { - .leds = dreamplug_led_pins, - .num_leds = ARRAY_SIZE(dreamplug_led_pins), -}; - -static struct platform_device dreamplug_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &dreamplug_led_data, - } -}; - static unsigned int dreamplug_mpp_config[] __initdata = { MPP0_SPI_SCn, MPP1_SPI_MOSI, @@ -100,6 +68,4 @@ void __init dreamplug_init(void) kirkwood_ge00_init(&dreamplug_ge00_data); kirkwood_ge01_init(&dreamplug_ge01_data); kirkwood_sdio_init(&dreamplug_mvsdio_data); - - platform_device_register(&dreamplug_leds); } -- cgit v1.2.3-18-g5258 From f3af1c73f0dde5848d1da50372979c784f2aa34a Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Tue, 17 Jul 2012 08:05:27 +0200 Subject: ARM: Kirkwood: Describe GoFlex Net LEDs and SATA in DT. Signed-off-by: Andrew Lunn Tested-by: Josh Coombs --- arch/arm/boot/dts/kirkwood-goflexnet.dts | 50 +++++++++++++++++++ arch/arm/mach-kirkwood/board-goflexnet.c | 84 -------------------------------- 2 files changed, 50 insertions(+), 84 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts index c5d5a4e9f11..f6974d1d27b 100644 --- a/arch/arm/boot/dts/kirkwood-goflexnet.dts +++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts @@ -45,5 +45,55 @@ reg = <0x02500000 0xd800000>; }; }; + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + + }; + gpio-leds { + compatible = "gpio-leds"; + + health { + label = "status:green:health"; + gpios = <&gpio1 14 1>; + linux,default-trigger = "default-on"; + }; + fault { + label = "status:orange:fault"; + gpios = <&gpio1 15 1>; + }; + left0 { + label = "status:white:left0"; + gpios = <&gpio1 10 0>; + }; + left1 { + label = "status:white:left1"; + gpios = <&gpio1 11 0>; + }; + left2 { + label = "status:white:left2"; + gpios = <&gpio1 12 0>; + }; + left3 { + label = "status:white:left3"; + gpios = <&gpio1 13 0>; + }; + right0 { + label = "status:white:right0"; + gpios = <&gpio1 6 0>; + }; + right1 { + label = "status:white:right1"; + gpios = <&gpio1 7 0>; + }; + right2 { + label = "status:white:right2"; + gpios = <&gpio1 8 0>; + }; + right3 { + label = "status:white:right3"; + gpios = <&gpio1 9 0>; + }; }; }; diff --git a/arch/arm/mach-kirkwood/board-goflexnet.c b/arch/arm/mach-kirkwood/board-goflexnet.c index 3957ece46d3..413e2c8ef5f 100644 --- a/arch/arm/mach-kirkwood/board-goflexnet.c +++ b/arch/arm/mach-kirkwood/board-goflexnet.c @@ -27,7 +27,6 @@ #include #include #include -#include #include #include #include @@ -41,86 +40,6 @@ static struct mv643xx_eth_platform_data goflexnet_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(0), }; -static struct mv_sata_platform_data goflexnet_sata_data = { - .n_ports = 2, -}; - -static struct gpio_led goflexnet_led_pins[] = { - { - .name = "status:green:health", - .default_trigger = "default-on", - .gpio = 46, - .active_low = 1, - }, - { - .name = "status:orange:fault", - .default_trigger = "none", - .gpio = 47, - .active_low = 1, - }, - { - .name = "status:white:left0", - .default_trigger = "none", - .gpio = 42, - .active_low = 0, - }, - { - .name = "status:white:left1", - .default_trigger = "none", - .gpio = 43, - .active_low = 0, - }, - { - .name = "status:white:left2", - .default_trigger = "none", - .gpio = 44, - .active_low = 0, - }, - { - .name = "status:white:left3", - .default_trigger = "none", - .gpio = 45, - .active_low = 0, - }, - { - .name = "status:white:right0", - .default_trigger = "none", - .gpio = 38, - .active_low = 0, - }, - { - .name = "status:white:right1", - .default_trigger = "none", - .gpio = 39, - .active_low = 0, - }, - { - .name = "status:white:right2", - .default_trigger = "none", - .gpio = 40, - .active_low = 0, - }, - { - .name = "status:white:right3", - .default_trigger = "none", - .gpio = 41, - .active_low = 0, - }, -}; - -static struct gpio_led_platform_data goflexnet_led_data = { - .leds = goflexnet_led_pins, - .num_leds = ARRAY_SIZE(goflexnet_led_pins), -}; - -static struct platform_device goflexnet_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &goflexnet_led_data, - } -}; - static unsigned int goflexnet_mpp_config[] __initdata = { MPP29_GPIO, /* USB Power Enable */ MPP47_GPIO, /* LED Orange */ @@ -149,7 +68,4 @@ void __init goflexnet_init(void) kirkwood_ehci_init(); kirkwood_ge00_init(&goflexnet_ge00_data); - kirkwood_sata_init(&goflexnet_sata_data); - - platform_device_register(&goflexnet_leds); } -- cgit v1.2.3-18-g5258 From f39c1101dd4489bca966974624fe19af1c8ebe23 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Wed, 18 Jul 2012 19:22:54 +0200 Subject: ARM: Kirkwood: Replace mrvl with marvell It has been decided to use marvell, not mrvl, in the compatibility property. Search & replace. Signed-off-by: Andrew Lunn --- arch/arm/boot/dts/kirkwood-dnskw.dtsi | 2 +- arch/arm/boot/dts/kirkwood-goflexnet.dts | 2 +- arch/arm/boot/dts/kirkwood-lschlv2.dts | 2 +- arch/arm/boot/dts/kirkwood-lsxhl.dts | 2 +- arch/arm/boot/dts/kirkwood-ts219.dtsi | 2 +- arch/arm/mach-kirkwood/board-dt.c | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi index 2bad626524d..7408655f91b 100644 --- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi +++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi @@ -2,7 +2,7 @@ / { model = "D-Link DNS NASes (kirkwood-based)"; - compatible = "dlink,dns-kirkwood", "mrvl,kirkwood-88f6281", "mrvl,kirkwood"; + compatible = "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood"; gpio_keys { compatible = "gpio-keys"; diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts index f6974d1d27b..7c8238fbb6f 100644 --- a/arch/arm/boot/dts/kirkwood-goflexnet.dts +++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts @@ -4,7 +4,7 @@ / { model = "Seagate GoFlex Net"; - compatible = "seagate,goflexnet", "mrvl,kirkwood-88f6281", "mrvl,kirkwood"; + compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood"; memory { device_type = "memory"; diff --git a/arch/arm/boot/dts/kirkwood-lschlv2.dts b/arch/arm/boot/dts/kirkwood-lschlv2.dts index 37649b58fd9..9510c9ea666 100644 --- a/arch/arm/boot/dts/kirkwood-lschlv2.dts +++ b/arch/arm/boot/dts/kirkwood-lschlv2.dts @@ -4,7 +4,7 @@ / { model = "Buffalo Linkstation LS-CHLv2"; - compatible = "buffalo,lschlv2", "buffalo,lsxl", "mrvl,kirkwood-88f6281", "mrvl,kirkwood"; + compatible = "buffalo,lschlv2", "buffalo,lsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood"; memory { device_type = "memory"; diff --git a/arch/arm/boot/dts/kirkwood-lsxhl.dts b/arch/arm/boot/dts/kirkwood-lsxhl.dts index eb3c07149be..739019c4cba 100644 --- a/arch/arm/boot/dts/kirkwood-lsxhl.dts +++ b/arch/arm/boot/dts/kirkwood-lsxhl.dts @@ -4,7 +4,7 @@ / { model = "Buffalo Linkstation LS-XHL"; - compatible = "buffalo,lsxhl", "buffalo,lsxl", "mrvl,kirkwood-88f6281", "mrvl,kirkwood"; + compatible = "buffalo,lsxhl", "buffalo,lsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood"; memory { device_type = "memory"; diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi index b4a789aa851..64ea27cb329 100644 --- a/arch/arm/boot/dts/kirkwood-ts219.dtsi +++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi @@ -2,7 +2,7 @@ / { model = "QNAP TS219 family"; - compatible = "qnap,ts219", "mrvl,kirkwood"; + compatible = "qnap,ts219", "marvell,kirkwood"; memory { device_type = "memory"; diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 43142cfbb7c..e4eb450de30 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -32,7 +32,7 @@ struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = { NULL), OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL), OF_DEV_AUXDATA("marvell,orion-sata", 0xf1080000, "sata_mv.0", NULL), - OF_DEV_AUXDATA("mrvl,orion-nand", 0xf4000000, "orion_nand", NULL), + OF_DEV_AUXDATA("marvell,orion-nand", 0xf4000000, "orion_nand", NULL), {}, }; -- cgit v1.2.3-18-g5258