From 2a2c74b2efcb1a0ca3fdcb5fbb96ad8de6a29177 Mon Sep 17 00:00:00 2001 From: Alistair Popple Date: Thu, 6 Mar 2014 14:52:27 +1100 Subject: IBM Akebono: Add the Akebono platform This patch adds support for the IBM Akebono board. Signed-off-by: Alistair Popple Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/boot/Makefile | 3 + arch/powerpc/boot/dcr.h | 4 + arch/powerpc/boot/dts/akebono.dts | 385 +++++++++++++++++++++++++++++ arch/powerpc/boot/treeboot-akebono.c | 178 +++++++++++++ arch/powerpc/boot/wrapper | 3 + arch/powerpc/configs/44x/akebono_defconfig | 148 +++++++++++ arch/powerpc/platforms/44x/Kconfig | 26 ++ arch/powerpc/platforms/44x/Makefile | 1 + arch/powerpc/platforms/44x/ppc476.c | 112 +++++++-- arch/powerpc/sysdev/ppc4xx_pci.c | 13 +- 10 files changed, 847 insertions(+), 26 deletions(-) create mode 100644 arch/powerpc/boot/dts/akebono.dts create mode 100644 arch/powerpc/boot/treeboot-akebono.c create mode 100644 arch/powerpc/configs/44x/akebono_defconfig (limited to 'arch') diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index a33c23308e9..426dce7ae7c 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -53,6 +53,7 @@ $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405 $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405 $(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405 $(obj)/treeboot-currituck.o: BOOTCFLAGS += -mcpu=405 +$(obj)/treeboot-akebono.o: BOOTCFLAGS += -mcpu=405 $(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405 @@ -92,6 +93,7 @@ src-plat-$(CONFIG_44x) += treeboot-ebony.c cuboot-ebony.c treeboot-bamboo.c \ cuboot-taishan.c cuboot-katmai.c \ cuboot-warp.c cuboot-yosemite.c \ treeboot-iss4xx.c treeboot-currituck.c \ + treeboot-akebono.c \ simpleboot.c fixed-head.S virtex.c src-plat-$(CONFIG_8xx) += cuboot-8xx.c fixed-head.S ep88xc.c redboot-8xx.c src-plat-$(CONFIG_PPC_MPC52xx) += cuboot-52xx.c @@ -250,6 +252,7 @@ image-$(CONFIG_YOSEMITE) += cuImage.yosemite image-$(CONFIG_ISS4xx) += treeImage.iss4xx \ treeImage.iss4xx-mpic image-$(CONFIG_CURRITUCK) += treeImage.currituck +image-$(CONFIG_AKEBONO) += treeImage.akebono # Board ports in arch/powerpc/platform/8xx/Kconfig image-$(CONFIG_MPC86XADS) += cuImage.mpc866ads diff --git a/arch/powerpc/boot/dcr.h b/arch/powerpc/boot/dcr.h index cc73f7a95e2..bf8f4ede192 100644 --- a/arch/powerpc/boot/dcr.h +++ b/arch/powerpc/boot/dcr.h @@ -15,6 +15,10 @@ asm volatile("mfdcrx %0,%1" : "=r"(rval) : "r"(rn)); \ rval; \ }) +#define mtdcrx(rn, val) \ + ({ \ + asm volatile("mtdcrx %0,%1" : : "r"(rn), "r" (val)); \ + }) /* 440GP/440GX SDRAM controller DCRs */ #define DCRN_SDRAM0_CFGADDR 0x010 diff --git a/arch/powerpc/boot/dts/akebono.dts b/arch/powerpc/boot/dts/akebono.dts new file mode 100644 index 00000000000..96ac13b2a02 --- /dev/null +++ b/arch/powerpc/boot/dts/akebono.dts @@ -0,0 +1,385 @@ +/* + * Device Tree Source for IBM Embedded PPC 476 Platform + * + * Copyright © 2013 Tony Breeds IBM Corporation + * Copyright © 2013 Alistair Popple IBM Corporation + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/memreserve/ 0x01f00000 0x00100000; // spin table + +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "ibm,akebono"; + compatible = "ibm,akebono", "ibm,476gtr"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + serial0 = &UART0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,476"; + reg = <0>; + clock-frequency = <1600000000>; // 1.6 GHz + timebase-frequency = <100000000>; // 100Mhz + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + status = "ok"; + }; + cpu@1 { + device_type = "cpu"; + model = "PowerPC,476"; + reg = <1>; + clock-frequency = <1600000000>; // 1.6 GHz + timebase-frequency = <100000000>; // 100Mhz + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + status = "disabled"; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x01f00000>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x0>; // filled in by zImage + }; + + MPIC: interrupt-controller { + compatible = "chrp,open-pic"; + interrupt-controller; + dcr-reg = <0xffc00000 0x00040000>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + single-cpu-affinity; + }; + + plb { + compatible = "ibm,plb6"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-frequency = <200000000>; // 200Mhz + + MAL0: mcmal { + compatible = "ibm,mcmal-476gtr", "ibm,mcmal2"; + dcr-reg = <0xc0000000 0x062>; + num-tx-chans = <1>; + num-rx-chans = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-parent = <&MPIC>; + interrupts = < /*TXEOB*/ 77 0x4 + /*RXEOB*/ 78 0x4 + /*SERR*/ 76 0x4 + /*TXDE*/ 79 0x4 + /*RXDE*/ 80 0x4>; + }; + + SATA0: sata@30000010000 { + compatible = "ibm,476gtr-ahci"; + reg = <0x300 0x00010000 0x0 0x10000>; + interrupt-parent = <&MPIC>; + interrupts = <93 2>; + }; + + EHCI0: ehci@30010000000 { + compatible = "ibm,476gtr-ehci", "generic-ehci"; + reg = <0x300 0x10000000 0x0 0x10000>; + interrupt-parent = <&MPIC>; + interrupts = <85 2>; + }; + + SD0: sd@30000000000 { + compatible = "ibm,476gtr-sdhci", "generic-sdhci"; + reg = <0x300 0x00000000 0x0 0x10000>; + interrupts = <91 2>; + interrupt-parent = <&MPIC>; + }; + + OHCI0: ohci@30010010000 { + compatible = "ibm,476gtr-ohci", "generic-ohci"; + reg = <0x300 0x10010000 0x0 0x10000>; + interrupt-parent = <&MPIC>; + interrupts = <89 1>; + }; + + OHCI1: ohci@30010020000 { + compatible = "ibm,476gtr-ohci", "generic-ohci"; + reg = <0x300 0x10020000 0x0 0x10000>; + interrupt-parent = <&MPIC>; + interrupts = <88 1>; + }; + + POB0: opb { + compatible = "ibm,opb-4xx", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + /* Wish there was a nicer way of specifying a full + * 32-bit range + */ + ranges = <0x00000000 0x0000033f 0x00000000 0x80000000 + 0x80000000 0x0000033f 0x80000000 0x80000000>; + clock-frequency = <100000000>; + + RGMII0: emac-rgmii-wol@50004 { + compatible = "ibm,rgmii-wol-476gtr", "ibm,rgmii-wol"; + reg = <0x50004 0x00000008>; + has-mdio; + }; + + EMAC0: ethernet@30000 { + device_type = "network"; + compatible = "ibm,emac-476gtr", "ibm,emac4sync"; + interrupt-parent = <&EMAC0>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = ; + reg = <0x30000 0x78>; + + /* local-mac-address will normally be added by + * the wrapper. If your device doesn't support + * passing data to the wrapper (in the form + * local-mac-addr=) then you will need + * to set it manually here. */ + //local-mac-address = [000000000000]; + + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-wol-device = <&RGMII0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + UART0: serial@10000 { + device_type = "serial"; + compatible = "ns16750", "ns16550"; + reg = <0x10000 0x00000008>; + virtual-reg = <0xe8010000>; + clock-frequency = <1851851>; + current-speed = <38400>; + interrupt-parent = <&MPIC>; + interrupts = <39 2>; + }; + + IIC0: i2c@00000000 { + compatible = "ibm,iic-476gtr", "ibm,iic"; + reg = <0x0 0x00000020>; + interrupt-parent = <&MPIC>; + interrupts = <37 2>; + #address-cells = <1>; + #size-cells = <0>; + rtc@68 { + compatible = "stm,m41t80", "m41st85"; + reg = <0x68>; + }; + }; + + IIC1: i2c@00000100 { + compatible = "ibm,iic-476gtr", "ibm,iic"; + reg = <0x100 0x00000020>; + interrupt-parent = <&MPIC>; + interrupts = <38 2>; + #address-cells = <1>; + #size-cells = <0>; + avr@58 { + compatible = "ibm,akebono-avr"; + reg = <0x58>; + }; + }; + + FPGA0: fpga@ebc00000 { + compatible = "ibm,akebono-fpga"; + reg = <0xebc00000 0x8>; + }; + }; + + PCIE0: pciex@10100000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex"; + primary; + port = <0x0>; /* port number */ + reg = <0x00000101 0x00000000 0x0 0x10000000 /* Config space access */ + 0x00000100 0x00000000 0x0 0x00001000>; /* UTL Registers space access */ + dcr-reg = <0xc0 0x20>; + +// pci_space < pci_addr > < cpu_addr > < size > + ranges = <0x02000000 0x00000000 0x80000000 0x00000110 0x80000000 0x0 0x80000000 + 0x01000000 0x0 0x0 0x00000140 0x0 0x0 0x00010000>; + + /* Inbound starting at 0 to memsize filled in by zImage */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>; + + /* This drives busses 0 to 0xf */ + bus-range = <0x0 0xf>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &MPIC 45 0x2 /* int A */ + 0x0 0x0 0x0 0x2 &MPIC 46 0x2 /* int B */ + 0x0 0x0 0x0 0x3 &MPIC 47 0x2 /* int C */ + 0x0 0x0 0x0 0x4 &MPIC 48 0x2 /* int D */>; + }; + + PCIE1: pciex@20100000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex"; + primary; + port = <0x1>; /* port number */ + reg = <0x00000201 0x00000000 0x0 0x10000000 /* Config space access */ + 0x00000200 0x00000000 0x0 0x00001000>; /* UTL Registers space access */ + dcr-reg = <0x100 0x20>; + +// pci_space < pci_addr > < cpu_addr > < size > + ranges = <0x02000000 0x00000000 0x80000000 0x00000210 0x80000000 0x0 0x80000000 + 0x01000000 0x0 0x0 0x00000240 0x0 0x0 0x00010000>; + + /* Inbound starting at 0 to memsize filled in by zImage */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>; + + /* This drives busses 0 to 0xf */ + bus-range = <0x0 0xf>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &MPIC 53 0x2 /* int A */ + 0x0 0x0 0x0 0x2 &MPIC 54 0x2 /* int B */ + 0x0 0x0 0x0 0x3 &MPIC 55 0x2 /* int C */ + 0x0 0x0 0x0 0x4 &MPIC 56 0x2 /* int D */>; + }; + + PCIE2: pciex@18100000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex"; + primary; + port = <0x2>; /* port number */ + reg = <0x00000181 0x00000000 0x0 0x10000000 /* Config space access */ + 0x00000180 0x00000000 0x0 0x00001000>; /* UTL Registers space access */ + dcr-reg = <0xe0 0x20>; + +// pci_space < pci_addr > < cpu_addr > < size > + ranges = <0x02000000 0x00000000 0x80000000 0x00000190 0x80000000 0x0 0x80000000 + 0x01000000 0x0 0x0 0x000001c0 0x0 0x0 0x00010000>; + + /* Inbound starting at 0 to memsize filled in by zImage */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>; + + /* This drives busses 0 to 0xf */ + bus-range = <0x0 0xf>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &MPIC 61 0x2 /* int A */ + 0x0 0x0 0x0 0x2 &MPIC 62 0x2 /* int B */ + 0x0 0x0 0x0 0x3 &MPIC 63 0x2 /* int C */ + 0x0 0x0 0x0 0x4 &MPIC 64 0x2 /* int D */>; + }; + + PCIE3: pciex@28100000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex"; + primary; + port = <0x3>; /* port number */ + reg = <0x00000281 0x00000000 0x0 0x10000000 /* Config space access */ + 0x00000280 0x00000000 0x0 0x00001000>; /* UTL Registers space access */ + dcr-reg = <0x120 0x20>; + +// pci_space < pci_addr > < cpu_addr > < size > + ranges = <0x02000000 0x00000000 0x80000000 0x00000290 0x80000000 0x0 0x80000000 + 0x01000000 0x0 0x0 0x000002c0 0x0 0x0 0x00010000>; + + /* Inbound starting at 0 to memsize filled in by zImage */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>; + + /* This drives busses 0 to 0xf */ + bus-range = <0x0 0xf>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &MPIC 69 0x2 /* int A */ + 0x0 0x0 0x0 0x2 &MPIC 70 0x2 /* int B */ + 0x0 0x0 0x0 0x3 &MPIC 71 0x2 /* int C */ + 0x0 0x0 0x0 0x4 &MPIC 72 0x2 /* int D */>; + }; + }; + + chosen { + linux,stdout-path = &UART0; + }; +}; diff --git a/arch/powerpc/boot/treeboot-akebono.c b/arch/powerpc/boot/treeboot-akebono.c new file mode 100644 index 00000000000..070a20f2f5d --- /dev/null +++ b/arch/powerpc/boot/treeboot-akebono.c @@ -0,0 +1,178 @@ +/* + * Copyright © 2013 Tony Breeds IBM Corporation + * Copyright © 2013 Alistair Popple IBM Corporation + * + * Based on earlier code: + * Copyright (C) Paul Mackerras 1997. + * + * Matt Porter + * Copyright 2002-2005 MontaVista Software Inc. + * + * Eugene Surovegin or + * Copyright (c) 2003, 2004 Zultys Technologies + * + * Copyright 2007 David Gibson, IBM Corporation. + * Copyright 2010 Ben. Herrenschmidt, IBM Corporation. + * Copyright © 2011 David Kleikamp IBM Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include +#include +#include "types.h" +#include "elf.h" +#include "string.h" +#include "stdlib.h" +#include "stdio.h" +#include "page.h" +#include "ops.h" +#include "reg.h" +#include "io.h" +#include "dcr.h" +#include "4xx.h" +#include "44x.h" +#include "libfdt.h" + +BSS_STACK(4096); + +#define SPRN_PIR 0x11E /* Processor Indentification Register */ +#define USERDATA_LEN 256 /* Length of userdata passed in by PIBS */ +#define MAX_RANKS 0x4 +#define DDR3_MR0CF 0x80010011U +#define CCTL0_MCO2 0x8000080FU +#define CCTL0_MCO3 0x80000810U +#define CCTL0_MCO4 0x80000811U +#define CCTL0_MCO5 0x80000812U +#define CCTL0_MCO6 0x80000813U + +static unsigned long long ibm_akebono_memsize; +static long long unsigned mac_addr; + +static unsigned long long ibm_akebono_detect_memsize(void) +{ + u32 reg; + unsigned i; + unsigned long long memsize = 0; + + for (i = 0; i < MAX_RANKS; i++) { + reg = mfdcrx(DDR3_MR0CF + i); + + if (!(reg & 1)) + continue; + + reg &= 0x0000f000; + reg >>= 12; + memsize += (0x800000ULL << reg); + } + + return memsize; +} + +static void ibm_akebono_fixups(void) +{ + void *emac; + u32 reg; + void *devp = finddevice("/"); + u32 dma_ranges[7]; + + dt_fixup_memory(0x0ULL, ibm_akebono_memsize); + + while ((devp = find_node_by_devtype(devp, "pci"))) { + if (getprop(devp, "dma-ranges", dma_ranges, + sizeof(dma_ranges)) < 0) { + printf("%s: Failed to get dma-ranges\r\n", __func__); + continue; + } + + dma_ranges[5] = ibm_akebono_memsize >> 32; + dma_ranges[6] = ibm_akebono_memsize & 0xffffffffUL; + + setprop(devp, "dma-ranges", dma_ranges, sizeof(dma_ranges)); + } + + /* Fixup the SD timeout frequency */ + mtdcrx(CCTL0_MCO4, 0x1); + + /* Disable SD high-speed mode (which seems to be broken) */ + reg = mfdcrx(CCTL0_MCO2) & ~0x2; + mtdcrx(CCTL0_MCO2, reg); + + /* Set the MAC address */ + emac = finddevice("/plb/opb/ethernet"); + if (emac > 0) { + if (mac_addr) + setprop(emac, "local-mac-address", + ((u8 *) &mac_addr) + 2 , 6); + } +} + +void platform_init(char *userdata) +{ + unsigned long end_of_ram, avail_ram; + u32 pir_reg; + int node, size; + const u32 *timebase; + int len, i, userdata_len; + char *end; + + userdata[USERDATA_LEN - 1] = '\0'; + userdata_len = strlen(userdata); + for (i = 0; i < userdata_len - 15; i++) { + if (strncmp(&userdata[i], "local-mac-addr=", 15) == 0) { + if (i > 0 && userdata[i - 1] != ' ') { + /* We've only found a substring ending + * with local-mac-addr so this isn't + * our mac address. */ + continue; + } + + mac_addr = strtoull(&userdata[i + 15], &end, 16); + + /* Remove the "local-mac-addr=<...>" from the kernel + * command line, including the tailing space if + * present. */ + if (*end == ' ') + end++; + + len = ((int) end) - ((int) &userdata[i]); + memmove(&userdata[i], end, + userdata_len - (len + i) + 1); + break; + } + } + + loader_info.cmdline = userdata; + loader_info.cmdline_len = 256; + + ibm_akebono_memsize = ibm_akebono_detect_memsize(); + if (ibm_akebono_memsize >> 32) + end_of_ram = ~0UL; + else + end_of_ram = ibm_akebono_memsize; + avail_ram = end_of_ram - (unsigned long)_end; + + simple_alloc_init(_end, avail_ram, 128, 64); + platform_ops.fixups = ibm_akebono_fixups; + platform_ops.exit = ibm44x_dbcr_reset; + pir_reg = mfspr(SPRN_PIR); + + /* Make sure FDT blob is sane */ + if (fdt_check_header(_dtb_start) != 0) + fatal("Invalid device tree blob\n"); + + node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type", + "cpu", sizeof("cpu")); + if (!node) + fatal("Cannot find cpu node\n"); + timebase = fdt_getprop(_dtb_start, node, "timebase-frequency", &size); + if (timebase && (size == 4)) + timebase_period_ns = 1000000000 / *timebase; + + fdt_set_boot_cpuid_phys(_dtb_start, pir_reg); + fdt_init(_dtb_start); + + serial_console_init(); +} diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index 1948cf8b8a4..ae0f88ec4a3 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -270,6 +270,9 @@ gamecube|wii) treeboot-currituck) link_address='0x1000000' ;; +treeboot-akebono) + link_address='0x1000000' + ;; treeboot-iss4xx-mpic) platformo="$object/treeboot-iss4xx.o" ;; diff --git a/arch/powerpc/configs/44x/akebono_defconfig b/arch/powerpc/configs/44x/akebono_defconfig new file mode 100644 index 00000000000..7e2530cd9d3 --- /dev/null +++ b/arch/powerpc/configs/44x/akebono_defconfig @@ -0,0 +1,148 @@ +CONFIG_44x=y +CONFIG_SMP=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_RD_XZ=y +CONFIG_EXPERT=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_SLUB_CPU_PARTIAL is not set +CONFIG_PROFILING=y +CONFIG_OPROFILE=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_POWERNV_MSI is not set +CONFIG_PPC_47x=y +# CONFIG_EBONY is not set +CONFIG_AKEBONO=y +CONFIG_HIGHMEM=y +CONFIG_HZ_100=y +CONFIG_IRQ_ALL_CPUS=y +# CONFIG_COMPACTION is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="" +# CONFIG_SUSPEND is not set +CONFIG_PCI_MSI=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_IPV6 is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_CONNECTOR=y +CONFIG_MTD=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_PHYSMAP_OF=y +CONFIG_PROC_DEVICETREE=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=35000 +# CONFIG_SCSI_PROC_FS is not set +CONFIG_BLK_DEV_SD=y +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SATA_PMP is not set +# CONFIG_ATA_SFF is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_VENDOR_ADAPTEC is not set +# CONFIG_NET_VENDOR_ALTEON is not set +# CONFIG_NET_VENDOR_AMD is not set +# CONFIG_NET_VENDOR_ARC is not set +# CONFIG_NET_VENDOR_ATHEROS is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_BROCADE is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_CISCO is not set +# CONFIG_NET_VENDOR_DEC is not set +# CONFIG_NET_VENDOR_DLINK is not set +# CONFIG_NET_VENDOR_EMULEX is not set +# CONFIG_NET_VENDOR_EXAR is not set +# CONFIG_NET_VENDOR_HP is not set +CONFIG_IBM_EMAC=y +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MELLANOX is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MYRI is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_NVIDIA is not set +# CONFIG_NET_VENDOR_OKI is not set +# CONFIG_NET_VENDOR_QLOGIC is not set +# CONFIG_NET_VENDOR_REALTEK is not set +# CONFIG_NET_VENDOR_RDC is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SILAN is not set +# CONFIG_NET_VENDOR_SIS is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_SUN is not set +# CONFIG_NET_VENDOR_TEHUTI is not set +# CONFIG_NET_VENDOR_TI is not set +# CONFIG_NET_VENDOR_VIA is not set +# CONFIG_NET_VENDOR_WIZNET is not set +# CONFIG_NET_VENDOR_XILINX is not set +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_MOUSE_PS2 is not set +# CONFIG_SERIO is not set +# CONFIG_VT is not set +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_HW_RANDOM is not set +CONFIG_I2C_CHARDEV=y +# CONFIG_HWMON is not set +CONFIG_THERMAL=y +# CONFIG_USB_DEFAULT_PERSIST is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_HCD_PCI is not set +CONFIG_USB_STORAGE=y +CONFIG_MMC=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_M41T80=y +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY_USER is not set +CONFIG_VFAT_FS=y +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_CRAMFS=y +# CONFIG_NETWORK_FILESYSTEMS is not set +CONFIG_NLS_DEFAULT="n" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_FS=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_XMON=y +CONFIG_XMON_DEFAULT=y +CONFIG_PPC_EARLY_DEBUG=y +CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0x00010000 +CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x33f +CONFIG_CRYPTO_PCBC=y +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1_PPC=y +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index dc1a264ec6e..b0202d83063 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -199,6 +199,32 @@ config CURRITUCK help This option enables support for the IBM Currituck (476fpe) evaluation board +config AKEBONO + bool "IBM Akebono (476gtr) Support" + depends on PPC_47x + default n + select SWIOTLB + select 476FPE + select PPC4xx_PCI_EXPRESS + select I2C + select I2C_IBM_IIC + select NETDEVICES + select ETHERNET + select NET_VENDOR_IBM + select IBM_EMAC_EMAC4 + select IBM_EMAC_RGMII_WOL + select USB + select USB_OHCI_HCD_PLATFORM + select USB_EHCI_HCD_PLATFORM + select MMC_SDHCI + select MMC_SDHCI_PLTFM + select MMC_SDHCI_OF_476GTR + select ATA + select SATA_AHCI_PLATFORM + help + This option enables support for the IBM Akebono (476gtr) evaluation board + + config ICON bool "Icon" depends on 44x diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile index f896b896b64..26d35b5941f 100644 --- a/arch/powerpc/platforms/44x/Makefile +++ b/arch/powerpc/platforms/44x/Makefile @@ -11,3 +11,4 @@ obj-$(CONFIG_XILINX_ML510) += virtex_ml510.o obj-$(CONFIG_ISS4xx) += iss4xx.o obj-$(CONFIG_CANYONLANDS)+= canyonlands.o obj-$(CONFIG_CURRITUCK) += ppc476.o +obj-$(CONFIG_AKEBONO) += ppc476.o diff --git a/arch/powerpc/platforms/44x/ppc476.c b/arch/powerpc/platforms/44x/ppc476.c index c6c5a6f28ff..33986c1a05d 100644 --- a/arch/powerpc/platforms/44x/ppc476.c +++ b/arch/powerpc/platforms/44x/ppc476.c @@ -1,7 +1,8 @@ /* * PowerPC 476FPE board specific routines * - * Copyright © 2011 Tony Breeds IBM Corporation + * Copyright © 2013 Tony Breeds IBM Corporation + * Copyright © 2013 Alistair Popple IBM Corporation * * Based on earlier code: * Matt Porter @@ -35,6 +36,7 @@ #include #include +#include static struct of_device_id ppc47x_of_bus[] __initdata = { { .compatible = "ibm,plb4", }, @@ -55,15 +57,69 @@ static void quirk_ppc_currituck_usb_fixup(struct pci_dev *dev) } DECLARE_PCI_FIXUP_HEADER(0x1033, 0x0035, quirk_ppc_currituck_usb_fixup); +/* Akebono has an AVR microcontroller attached to the I2C bus + * which is used to power off/reset the system. */ + +/* AVR I2C Commands */ +#define AVR_PWRCTL_CMD (0x26) + +/* Flags for the power control I2C commands */ +#define AVR_PWRCTL_PWROFF (0x01) +#define AVR_PWRCTL_RESET (0x02) + +static struct i2c_client *avr_i2c_client; +static void avr_halt_system(int pwrctl_flags) +{ + /* Request the AVR to reset the system */ + i2c_smbus_write_byte_data(avr_i2c_client, + AVR_PWRCTL_CMD, pwrctl_flags); + + /* Wait for system to be reset */ + while (1) + ; +} + +static void avr_power_off_system(void) +{ + avr_halt_system(AVR_PWRCTL_PWROFF); +} + +static void avr_reset_system(char *cmd) +{ + avr_halt_system(AVR_PWRCTL_RESET); +} + +static int avr_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + avr_i2c_client = client; + ppc_md.restart = avr_reset_system; + ppc_md.power_off = avr_power_off_system; + return 0; +} + +static const struct i2c_device_id avr_id[] = { + { "akebono-avr", 0 }, + { } +}; + +static struct i2c_driver avr_driver = { + .driver = { + .name = "akebono-avr", + }, + .probe = avr_probe, + .id_table = avr_id, +}; + static int __init ppc47x_device_probe(void) { + i2c_add_driver(&avr_driver); of_platform_bus_probe(NULL, ppc47x_of_bus, NULL); return 0; } machine_device_initcall(ppc47x, ppc47x_device_probe); -/* We can have either UICs or MPICs */ static void __init ppc47x_init_irq(void) { struct device_node *np; @@ -163,37 +219,30 @@ static void __init ppc47x_setup_arch(void) ppc47x_smp_init(); } -/* - * Called very early, MMU is off, device-tree isn't unflattened - */ -static int __init ppc47x_probe(void) -{ - unsigned long root = of_get_flat_dt_root(); - - if (!of_flat_dt_is_compatible(root, "ibm,currituck")) - return 0; - - return 1; -} - static int board_rev = -1; static int __init ppc47x_get_board_rev(void) { - u8 fpga_reg0; - void *fpga; - struct device_node *np; + int reg; + u8 *fpga; + struct device_node *np = NULL; + + if (of_machine_is_compatible("ibm,currituck")) { + np = of_find_compatible_node(NULL, NULL, "ibm,currituck-fpga"); + reg = 0; + } else if (of_machine_is_compatible("ibm,akebono")) { + np = of_find_compatible_node(NULL, NULL, "ibm,akebono-fpga"); + reg = 2; + } - np = of_find_compatible_node(NULL, NULL, "ibm,currituck-fpga"); if (!np) goto fail; - fpga = of_iomap(np, 0); + fpga = (u8 *) of_iomap(np, 0); of_node_put(np); if (!fpga) goto fail; - fpga_reg0 = ioread8(fpga); - board_rev = fpga_reg0 & 0x03; + board_rev = ioread8(fpga + reg) & 0x03; pr_info("%s: Found board revision %d\n", __func__, board_rev); iounmap(fpga); return 0; @@ -221,13 +270,30 @@ static void ppc47x_pci_irq_fixup(struct pci_dev *dev) } } +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init ppc47x_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (of_flat_dt_is_compatible(root, "ibm,akebono")) + return 1; + + if (of_flat_dt_is_compatible(root, "ibm,currituck")) { + ppc_md.pci_irq_fixup = ppc47x_pci_irq_fixup; + return 1; + } + + return 0; +} + define_machine(ppc47x) { .name = "PowerPC 47x", .probe = ppc47x_probe, .progress = udbg_progress, .init_IRQ = ppc47x_init_irq, .setup_arch = ppc47x_setup_arch, - .pci_irq_fixup = ppc47x_pci_irq_fixup, .restart = ppc4xx_reset_system, .calibrate_decr = generic_calibrate_decr, }; diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c index 4914fd3f41e..5a4f61ee6b3 100644 --- a/arch/powerpc/sysdev/ppc4xx_pci.c +++ b/arch/powerpc/sysdev/ppc4xx_pci.c @@ -1440,7 +1440,8 @@ static int __init ppc4xx_pciex_check_core_init(struct device_node *np) ppc4xx_pciex_hwops = &ppc405ex_pcie_hwops; #endif #ifdef CONFIG_476FPE - if (of_device_is_compatible(np, "ibm,plb-pciex-476fpe")) + if (of_device_is_compatible(np, "ibm,plb-pciex-476fpe") + || of_device_is_compatible(np, "ibm,plb-pciex-476gtr")) ppc4xx_pciex_hwops = &ppc_476fpe_pcie_hwops; #endif if (ppc4xx_pciex_hwops == NULL) { @@ -1751,7 +1752,10 @@ static int __init ppc4xx_setup_one_pciex_POM(struct ppc4xx_pciex_port *port, dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL, sa | DCRO_PEGPL_460SX_OMR1MSKL_UOT | DCRO_PEGPL_OMRxMSKL_VAL); - else if (of_device_is_compatible(port->node, "ibm,plb-pciex-476fpe")) + else if (of_device_is_compatible( + port->node, "ibm,plb-pciex-476fpe") || + of_device_is_compatible( + port->node, "ibm,plb-pciex-476gtr")) dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL, sa | DCRO_PEGPL_476FPE_OMR1MSKL_UOT | DCRO_PEGPL_OMRxMSKL_VAL); @@ -1881,7 +1885,10 @@ static void __init ppc4xx_configure_pciex_PIMs(struct ppc4xx_pciex_port *port, sa |= PCI_BASE_ADDRESS_MEM_PREFETCH; if (of_device_is_compatible(port->node, "ibm,plb-pciex-460sx") || - of_device_is_compatible(port->node, "ibm,plb-pciex-476fpe")) + of_device_is_compatible( + port->node, "ibm,plb-pciex-476fpe") || + of_device_is_compatible( + port->node, "ibm,plb-pciex-476gtr")) sa |= PCI_BASE_ADDRESS_MEM_TYPE_64; out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa)); -- cgit v1.2.3-18-g5258