From 699efdd2d34c535f415516e06d3d9f0bed131664 Mon Sep 17 00:00:00 2001
From: JeongHyeon Kim <jhkim@insignal.co.kr>
Date: Thu, 21 Jul 2011 16:19:19 +0900
Subject: ARM: EXYNOS4: Add support for ORIGEN board

Insignal's ORIGEN board is based Samsung EXYNOS4210 SoC.

Signed-off-by: JeongHyeon Kim <jhkim@insignal.co.kr>
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
[kgene.kim@samsung.com: Fixed SoC name to EXYNOS4210]
[kgene.kim@samsung.com: Selected MACH_ORIGEN in exynos4_defconfig]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/configs/exynos4_defconfig  |   1 +
 arch/arm/mach-exynos4/Kconfig       |  10 ++++
 arch/arm/mach-exynos4/Makefile      |   1 +
 arch/arm/mach-exynos4/mach-origen.c | 108 ++++++++++++++++++++++++++++++++++++
 4 files changed, 120 insertions(+)
 create mode 100644 arch/arm/mach-exynos4/mach-origen.c

(limited to 'arch')

diff --git a/arch/arm/configs/exynos4_defconfig b/arch/arm/configs/exynos4_defconfig
index da53ff3b4d7..cd40bb56e56 100644
--- a/arch/arm/configs/exynos4_defconfig
+++ b/arch/arm/configs/exynos4_defconfig
@@ -11,6 +11,7 @@ CONFIG_MACH_SMDKV310=y
 CONFIG_MACH_ARMLEX4210=y
 CONFIG_MACH_UNIVERSAL_C210=y
 CONFIG_MACH_NURI=y
+CONFIG_MACH_ORIGEN=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_SMP=y
diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index 1435fc31c4b..3ab0f18c52a 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -186,6 +186,16 @@ config MACH_NURI
 	help
 	  Machine support for Samsung Mobile NURI Board.
 
+config MACH_ORIGEN
+	bool "ORIGEN"
+	select CPU_EXYNOS4210
+	select S3C_DEV_RTC
+	select S3C_DEV_WDT
+	select S3C_DEV_HSMMC2
+	select EXYNOS4_SETUP_SDHCI
+	help
+	  Machine support for ORIGEN based on Samsung EXYNOS4210
+
 endmenu
 
 comment "Configuration for HSMMC bus width"
diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile
index 60fe5ecf359..4b22dc53121 100644
--- a/arch/arm/mach-exynos4/Makefile
+++ b/arch/arm/mach-exynos4/Makefile
@@ -36,6 +36,7 @@ obj-$(CONFIG_MACH_SMDKV310)		+= mach-smdkv310.o
 obj-$(CONFIG_MACH_ARMLEX4210)		+= mach-armlex4210.o
 obj-$(CONFIG_MACH_UNIVERSAL_C210)	+= mach-universal_c210.o
 obj-$(CONFIG_MACH_NURI)			+= mach-nuri.o
+obj-$(CONFIG_MACH_ORIGEN)		+= mach-origen.o
 
 # device support
 
diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c
new file mode 100644
index 00000000000..ed59f86001a
--- /dev/null
+++ b/arch/arm/mach-exynos4/mach-origen.c
@@ -0,0 +1,108 @@
+/* linux/arch/arm/mach-exynos4/mach-origen.c
+ *
+ * Copyright (c) 2011 Insignal Co., Ltd.
+ *		http://www.insignal.co.kr/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/serial_core.h>
+#include <linux/gpio.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/input.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/exynos4.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/sdhci.h>
+#include <plat/iic.h>
+
+#include <mach/map.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define ORIGEN_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				 S3C2410_UCON_RXILEVEL |	\
+				 S3C2410_UCON_TXIRQMODE |	\
+				 S3C2410_UCON_RXIRQMODE |	\
+				 S3C2410_UCON_RXFIFO_TOI |	\
+				 S3C2443_UCON_RXERR_IRQEN)
+
+#define ORIGEN_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define ORIGEN_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				 S5PV210_UFCON_TXTRIG4 |	\
+				 S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= ORIGEN_UCON_DEFAULT,
+		.ulcon		= ORIGEN_ULCON_DEFAULT,
+		.ufcon		= ORIGEN_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= ORIGEN_UCON_DEFAULT,
+		.ulcon		= ORIGEN_ULCON_DEFAULT,
+		.ufcon		= ORIGEN_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= ORIGEN_UCON_DEFAULT,
+		.ulcon		= ORIGEN_ULCON_DEFAULT,
+		.ufcon		= ORIGEN_UFCON_DEFAULT,
+	},
+	[3] = {
+		.hwport		= 3,
+		.flags		= 0,
+		.ucon		= ORIGEN_UCON_DEFAULT,
+		.ulcon		= ORIGEN_ULCON_DEFAULT,
+		.ufcon		= ORIGEN_UFCON_DEFAULT,
+	},
+};
+
+static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = {
+	.cd_type		= S3C_SDHCI_CD_GPIO,
+	.ext_cd_gpio		= EXYNOS4_GPK2(2),
+	.ext_cd_gpio_invert	= 1,
+	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct platform_device *origen_devices[] __initdata = {
+	&s3c_device_hsmmc2,
+	&s3c_device_rtc,
+	&s3c_device_wdt,
+};
+
+static void __init origen_map_io(void)
+{
+	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
+}
+
+static void __init origen_machine_init(void)
+{
+	s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
+	platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
+}
+
+MACHINE_START(ORIGEN, "ORIGEN")
+	/* Maintainer: JeongHyeon Kim <jhkim@insignal.co.kr> */
+	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.init_irq	= exynos4_init_irq,
+	.map_io		= origen_map_io,
+	.init_machine	= origen_machine_init,
+	.timer		= &exynos4_timer,
+MACHINE_END
-- 
cgit v1.2.3-18-g5258


From 2c929420e8b532c14688dcd500253b90a24e7233 Mon Sep 17 00:00:00 2001
From: Vladimir Zapolskiy <vz@mleia.com>
Date: Thu, 18 Aug 2011 19:24:54 +0900
Subject: ARM: EXYNOS4: use dma-pl330 device name for clock

This change replaces s3c-pl330.x clock device names with dma-pl330.x,
otherwise there won't be a correspondence between clock device name
and amba device name, thus clocks can't be enabled.

Fixes runtime errors on clk_get() from drivers/dma/pl330.c:
  dma-pl330 dma-pl330.0: Cannot get operation clock.
  dma-pl330: probe of dma-pl330.0 failed with error -22

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Boojin Kim <boojin.kim@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/clock.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos4/clock.c
index 851dea01857..c7b62258722 100644
--- a/arch/arm/mach-exynos4/clock.c
+++ b/arch/arm/mach-exynos4/clock.c
@@ -455,12 +455,12 @@ static struct clk init_clocks_off[] = {
 		.ctrlbit	= (1 << 10),
 	}, {
 		.name		= "pdma",
-		.devname	= "s3c-pl330.0",
+		.devname	= "dma-pl330.0",
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 0),
 	}, {
 		.name		= "pdma",
-		.devname	= "s3c-pl330.1",
+		.devname	= "dma-pl330.1",
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 1),
 	}, {
-- 
cgit v1.2.3-18-g5258


From d20cc4c1b660d59a25f8bebef5d55c1872b9aa76 Mon Sep 17 00:00:00 2001
From: Vladimir Zapolskiy <vz@mleia.com>
Date: Thu, 18 Aug 2011 19:24:55 +0900
Subject: ARM: S5PC100: use dma-pl330 device name for clock

This change replaces s3c-pl330.x clock device names with dma-pl330.x,
otherwise there won't be a correspondence between clock device name
and amba device name, thus clocks can't be enabled.

Fixes runtime errors on clk_get() from drivers/dma/pl330.c:
  dma-pl330 dma-pl330.0: Cannot get operation clock.
  dma-pl330: probe of dma-pl330.0 failed with error -22

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Boojin Kim <boojin.kim@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s5pc100/clock.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c
index ff5cbb30de5..1f69f342a0a 100644
--- a/arch/arm/mach-s5pc100/clock.c
+++ b/arch/arm/mach-s5pc100/clock.c
@@ -455,13 +455,13 @@ static struct clk init_clocks_off[] = {
 		.ctrlbit	= (1 << 2),
 	}, {
 		.name		= "pdma",
-		.devname	= "s3c-pl330.1",
+		.devname	= "dma-pl330.1",
 		.parent		= &clk_div_d1_bus.clk,
 		.enable		= s5pc100_d1_0_ctrl,
 		.ctrlbit	= (1 << 1),
 	}, {
 		.name		= "pdma",
-		.devname	= "s3c-pl330.0",
+		.devname	= "dma-pl330.0",
 		.parent		= &clk_div_d1_bus.clk,
 		.enable		= s5pc100_d1_0_ctrl,
 		.ctrlbit	= (1 << 0),
-- 
cgit v1.2.3-18-g5258


From 1ce3ea61c61c1e2127496df2c5d66650fd6456e2 Mon Sep 17 00:00:00 2001
From: Vladimir Zapolskiy <vz@mleia.com>
Date: Thu, 18 Aug 2011 19:24:55 +0900
Subject: ARM: S5PV210: use dma-pl330 device name for clock

This change replaces s3c-pl330.x clock device names with dma-pl330.x,
otherwise there won't be a correspondence between clock device name
and amba device name, thus clocks can't be enabled.

Fixes runtime errors on clk_get() from drivers/dma/pl330.c:
  dma-pl330 dma-pl330.0: Cannot get operation clock.
  dma-pl330: probe of dma-pl330.0 failed with error -22

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Boojin Kim <boojin.kim@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s5pv210/clock.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index 52a8e607bcc..50d458047c0 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -290,13 +290,13 @@ static struct clk_ops clk_fout_apll_ops = {
 static struct clk init_clocks_off[] = {
 	{
 		.name		= "pdma",
-		.devname	= "s3c-pl330.0",
+		.devname	= "dma-pl330.0",
 		.parent		= &clk_hclk_psys.clk,
 		.enable		= s5pv210_clk_ip0_ctrl,
 		.ctrlbit	= (1 << 3),
 	}, {
 		.name		= "pdma",
-		.devname	= "s3c-pl330.1",
+		.devname	= "dma-pl330.1",
 		.parent		= &clk_hclk_psys.clk,
 		.enable		= s5pv210_clk_ip0_ctrl,
 		.ctrlbit	= (1 << 4),
-- 
cgit v1.2.3-18-g5258


From 2213d0c0bae510df3860a48e107a5ba17ac72e99 Mon Sep 17 00:00:00 2001
From: Boojin Kim <boojin.kim@samsung.com>
Date: Thu, 18 Aug 2011 19:24:55 +0900
Subject: ARM: S5P64X0: Add the devname for DMA clock

This patch adds devname for DMA clock.
NOTE: This patch should be added after merging new pl330 driver on dmaengine.

Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s5p64x0/clock-s5p6440.c | 1 +
 arch/arm/mach-s5p64x0/clock-s5p6450.c | 1 +
 2 files changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c
index 0e9cd3092dd..fd7b08fd262 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6440.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c
@@ -147,6 +147,7 @@ static struct clk init_clocks_off[] = {
 		.ctrlbit	= (1 << 8),
 	}, {
 		.name		= "pdma",
+		.devname	= "dma-pl330",
 		.parent		= &clk_hclk_low.clk,
 		.enable		= s5p64x0_hclk0_ctrl,
 		.ctrlbit	= (1 << 12),
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c
index d9dc16cde10..1d989b8da03 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6450.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c
@@ -180,6 +180,7 @@ static struct clk init_clocks_off[] = {
 		.ctrlbit	= (1 << 3),
 	}, {
 		.name		= "pdma",
+		.devname	= "dma-pl330",
 		.parent		= &clk_hclk_low.clk,
 		.enable		= s5p64x0_hclk0_ctrl,
 		.ctrlbit	= (1 << 12),
-- 
cgit v1.2.3-18-g5258


From 42c0d26d2c32941e93ee805b32f7aebf8ba0a7d4 Mon Sep 17 00:00:00 2001
From: Kukjin Kim <kgene.kim@samsung.com>
Date: Thu, 18 Aug 2011 21:14:28 +0900
Subject: ARM: EXYNOS4: Turn the mach-smdkc210.c into mach-smdv310.c

Since the components on SMDKC210 are similar with SMDKV310
even though its memory is different. So we can support the
SMDKC210 and SMDKV310 on mach-smdkv310.c, one machine file.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/Kconfig         |  17 +-
 arch/arm/mach-exynos4/Makefile        |   2 +-
 arch/arm/mach-exynos4/mach-smdkc210.c | 309 ----------------------------------
 arch/arm/mach-exynos4/mach-smdkv310.c |  78 +++++++++
 4 files changed, 80 insertions(+), 326 deletions(-)
 delete mode 100644 arch/arm/mach-exynos4/mach-smdkc210.c

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index 0c77ab99fa1..bee8f77de2a 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -113,22 +113,7 @@ menu "EXYNOS4 Machines"
 
 config MACH_SMDKC210
 	bool "SMDKC210"
-	select CPU_EXYNOS4210
-	select S5P_DEV_FIMD0
-	select S3C_DEV_RTC
-	select S3C_DEV_WDT
-	select S3C_DEV_I2C1
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_HSMMC2
-	select S3C_DEV_HSMMC3
-	select SAMSUNG_DEV_PWM
-	select SAMSUNG_DEV_BACKLIGHT
-	select EXYNOS4_DEV_PD
-	select EXYNOS4_DEV_SYSMMU
-	select EXYNOS4_SETUP_FIMD0
-	select EXYNOS4_SETUP_I2C1
-	select EXYNOS4_SETUP_SDHCI
+	select MACH_SMDKV310
 	help
 	  Machine support for Samsung SMDKC210
 
diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile
index b7fe1d7b0b1..e3e93ea4138 100644
--- a/arch/arm/mach-exynos4/Makefile
+++ b/arch/arm/mach-exynos4/Makefile
@@ -25,7 +25,7 @@ obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
 
 # machine support
 
-obj-$(CONFIG_MACH_SMDKC210)		+= mach-smdkc210.o
+obj-$(CONFIG_MACH_SMDKC210)		+= mach-smdkv310.o
 obj-$(CONFIG_MACH_SMDKV310)		+= mach-smdkv310.o
 obj-$(CONFIG_MACH_ARMLEX4210)		+= mach-armlex4210.o
 obj-$(CONFIG_MACH_UNIVERSAL_C210)	+= mach-universal_c210.o
diff --git a/arch/arm/mach-exynos4/mach-smdkc210.c b/arch/arm/mach-exynos4/mach-smdkc210.c
deleted file mode 100644
index a7c65e05c1e..00000000000
--- a/arch/arm/mach-exynos4/mach-smdkc210.c
+++ /dev/null
@@ -1,309 +0,0 @@
-/* linux/arch/arm/mach-exynos4/mach-smdkc210.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/serial_core.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/lcd.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/smsc911x.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/pwm_backlight.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <video/platform_lcd.h>
-
-#include <plat/regs-serial.h>
-#include <plat/regs-srom.h>
-#include <plat/regs-fb-v4.h>
-#include <plat/exynos4.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
-#include <plat/sdhci.h>
-#include <plat/iic.h>
-#include <plat/pd.h>
-#include <plat/gpio-cfg.h>
-#include <plat/backlight.h>
-
-#include <mach/map.h>
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define SMDKC210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
-				 S3C2410_UCON_RXILEVEL |	\
-				 S3C2410_UCON_TXIRQMODE |	\
-				 S3C2410_UCON_RXIRQMODE |	\
-				 S3C2410_UCON_RXFIFO_TOI |	\
-				 S3C2443_UCON_RXERR_IRQEN)
-
-#define SMDKC210_ULCON_DEFAULT	S3C2410_LCON_CS8
-
-#define SMDKC210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
-				 S5PV210_UFCON_TXTRIG4 |	\
-				 S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg smdkc210_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport		= 0,
-		.flags		= 0,
-		.ucon		= SMDKC210_UCON_DEFAULT,
-		.ulcon		= SMDKC210_ULCON_DEFAULT,
-		.ufcon		= SMDKC210_UFCON_DEFAULT,
-	},
-	[1] = {
-		.hwport		= 1,
-		.flags		= 0,
-		.ucon		= SMDKC210_UCON_DEFAULT,
-		.ulcon		= SMDKC210_ULCON_DEFAULT,
-		.ufcon		= SMDKC210_UFCON_DEFAULT,
-	},
-	[2] = {
-		.hwport		= 2,
-		.flags		= 0,
-		.ucon		= SMDKC210_UCON_DEFAULT,
-		.ulcon		= SMDKC210_ULCON_DEFAULT,
-		.ufcon		= SMDKC210_UFCON_DEFAULT,
-	},
-	[3] = {
-		.hwport		= 3,
-		.flags		= 0,
-		.ucon		= SMDKC210_UCON_DEFAULT,
-		.ulcon		= SMDKC210_ULCON_DEFAULT,
-		.ufcon		= SMDKC210_UFCON_DEFAULT,
-	},
-};
-
-static struct s3c_sdhci_platdata smdkc210_hsmmc0_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= EXYNOS4_GPK0(2),
-	.ext_cd_gpio_invert	= 1,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
-	.max_width		= 8,
-	.host_caps		= MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdkc210_hsmmc1_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= EXYNOS4_GPK0(2),
-	.ext_cd_gpio_invert	= 1,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-static struct s3c_sdhci_platdata smdkc210_hsmmc2_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= EXYNOS4_GPK2(2),
-	.ext_cd_gpio_invert	= 1,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
-	.max_width		= 8,
-	.host_caps		= MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdkc210_hsmmc3_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= EXYNOS4_GPK2(2),
-	.ext_cd_gpio_invert	= 1,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-static void lcd_lte480wv_set_power(struct plat_lcd_data *pd,
-				   unsigned int power)
-{
-	if (power) {
-#if !defined(CONFIG_BACKLIGHT_PWM)
-		gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0");
-		gpio_free(EXYNOS4_GPD0(1));
-#endif
-		/* fire nRESET on power up */
-		gpio_request(EXYNOS4_GPX0(6), "GPX0");
-
-		gpio_direction_output(EXYNOS4_GPX0(6), 1);
-		mdelay(100);
-
-		gpio_set_value(EXYNOS4_GPX0(6), 0);
-		mdelay(10);
-
-		gpio_set_value(EXYNOS4_GPX0(6), 1);
-		mdelay(10);
-
-		gpio_free(EXYNOS4_GPX0(6));
-	} else {
-#if !defined(CONFIG_BACKLIGHT_PWM)
-		gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0");
-		gpio_free(EXYNOS4_GPD0(1));
-#endif
-	}
-}
-
-static struct plat_lcd_data smdkc210_lcd_lte480wv_data = {
-	.set_power		= lcd_lte480wv_set_power,
-};
-
-static struct platform_device smdkc210_lcd_lte480wv = {
-	.name			= "platform-lcd",
-	.dev.parent		= &s5p_device_fimd0.dev,
-	.dev.platform_data	= &smdkc210_lcd_lte480wv_data,
-};
-
-static struct s3c_fb_pd_win smdkc210_fb_win0 = {
-	.win_mode = {
-		.left_margin	= 13,
-		.right_margin	= 8,
-		.upper_margin	= 7,
-		.lower_margin	= 5,
-		.hsync_len	= 3,
-		.vsync_len	= 1,
-		.xres		= 800,
-		.yres		= 480,
-	},
-	.max_bpp		= 32,
-	.default_bpp		= 24,
-};
-
-static struct s3c_fb_platdata smdkc210_lcd0_pdata __initdata = {
-	.win[0]		= &smdkc210_fb_win0,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
-};
-
-static struct resource smdkc210_smsc911x_resources[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_SROM_BANK(1),
-		.end	= EXYNOS4_PA_SROM_BANK(1) + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_EINT(5),
-		.end	= IRQ_EINT(5),
-		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
-	},
-};
-
-static struct smsc911x_platform_config smsc9215_config = {
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.flags		= SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-	.mac		= {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
-};
-
-static struct platform_device smdkc210_smsc911x = {
-	.name		= "smsc911x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smdkc210_smsc911x_resources),
-	.resource	= smdkc210_smsc911x_resources,
-	.dev		= {
-		.platform_data	= &smsc9215_config,
-	},
-};
-
-static struct i2c_board_info i2c_devs1[] __initdata = {
-	{I2C_BOARD_INFO("wm8994", 0x1a),},
-};
-
-static struct platform_device *smdkc210_devices[] __initdata = {
-	&s3c_device_hsmmc0,
-	&s3c_device_hsmmc1,
-	&s3c_device_hsmmc2,
-	&s3c_device_hsmmc3,
-	&s3c_device_i2c1,
-	&s3c_device_rtc,
-	&s3c_device_wdt,
-	&exynos4_device_ac97,
-	&exynos4_device_i2s0,
-	&exynos4_device_pd[PD_MFC],
-	&exynos4_device_pd[PD_G3D],
-	&exynos4_device_pd[PD_LCD0],
-	&exynos4_device_pd[PD_LCD1],
-	&exynos4_device_pd[PD_CAM],
-	&exynos4_device_pd[PD_TV],
-	&exynos4_device_pd[PD_GPS],
-	&exynos4_device_sysmmu,
-	&samsung_asoc_dma,
-	&s5p_device_fimd0,
-	&smdkc210_lcd_lte480wv,
-	&smdkc210_smsc911x,
-};
-
-static void __init smdkc210_smsc911x_init(void)
-{
-	u32 cs1;
-
-	/* configure nCS1 width to 16 bits */
-	cs1 = __raw_readl(S5P_SROM_BW) &
-		~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT);
-	cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) |
-		(1 << S5P_SROM_BW__WAITENABLE__SHIFT) |
-		(1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) <<
-		S5P_SROM_BW__NCS1__SHIFT;
-	__raw_writel(cs1, S5P_SROM_BW);
-
-	/* set timing for nCS1 suitable for ethernet chip */
-	__raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) |
-		     (0x9 << S5P_SROM_BCX__TACP__SHIFT) |
-		     (0xc << S5P_SROM_BCX__TCAH__SHIFT) |
-		     (0x1 << S5P_SROM_BCX__TCOH__SHIFT) |
-		     (0x6 << S5P_SROM_BCX__TACC__SHIFT) |
-		     (0x1 << S5P_SROM_BCX__TCOS__SHIFT) |
-		     (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
-}
-
-/* LCD Backlight data */
-static struct samsung_bl_gpio_info smdkc210_bl_gpio_info = {
-	.no = EXYNOS4_GPD0(1),
-	.func = S3C_GPIO_SFN(2),
-};
-
-static struct platform_pwm_backlight_data smdkc210_bl_data = {
-	.pwm_id = 1,
-	.pwm_period_ns  = 1000,
-};
-
-static void __init smdkc210_map_io(void)
-{
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
-	s3c24xx_init_clocks(24000000);
-	s3c24xx_init_uarts(smdkc210_uartcfgs, ARRAY_SIZE(smdkc210_uartcfgs));
-}
-
-static void __init smdkc210_machine_init(void)
-{
-	s3c_i2c1_set_platdata(NULL);
-	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
-
-	smdkc210_smsc911x_init();
-
-	s3c_sdhci0_set_platdata(&smdkc210_hsmmc0_pdata);
-	s3c_sdhci1_set_platdata(&smdkc210_hsmmc1_pdata);
-	s3c_sdhci2_set_platdata(&smdkc210_hsmmc2_pdata);
-	s3c_sdhci3_set_platdata(&smdkc210_hsmmc3_pdata);
-
-	samsung_bl_set(&smdkc210_bl_gpio_info, &smdkc210_bl_data);
-	s5p_fimd0_set_platdata(&smdkc210_lcd0_pdata);
-
-	platform_add_devices(smdkc210_devices, ARRAY_SIZE(smdkc210_devices));
-}
-
-MACHINE_START(SMDKC210, "SMDKC210")
-	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	.boot_params	= S5P_PA_SDRAM + 0x100,
-	.init_irq	= exynos4_init_irq,
-	.map_io		= smdkc210_map_io,
-	.init_machine	= smdkc210_machine_init,
-	.timer		= &exynos4_timer,
-MACHINE_END
diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c
index ea414955686..a16eb569a3e 100644
--- a/arch/arm/mach-exynos4/mach-smdkv310.c
+++ b/arch/arm/mach-exynos4/mach-smdkv310.c
@@ -9,7 +9,9 @@
 */
 
 #include <linux/serial_core.h>
+#include <linux/delay.h>
 #include <linux/gpio.h>
+#include <linux/lcd.h>
 #include <linux/mmc/host.h>
 #include <linux/platform_device.h>
 #include <linux/smsc911x.h>
@@ -21,11 +23,14 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
+#include <video/platform_lcd.h>
 #include <plat/regs-serial.h>
 #include <plat/regs-srom.h>
+#include <plat/regs-fb-v4.h>
 #include <plat/exynos4.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
+#include <plat/fb.h>
 #include <plat/keypad.h>
 #include <plat/sdhci.h>
 #include <plat/iic.h>
@@ -112,6 +117,67 @@ static struct s3c_sdhci_platdata smdkv310_hsmmc3_pdata __initdata = {
 	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 };
 
+static void lcd_lte480wv_set_power(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power) {
+#if !defined(CONFIG_BACKLIGHT_PWM)
+		gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0");
+		gpio_free(EXYNOS4_GPD0(1));
+#endif
+		/* fire nRESET on power up */
+		gpio_request(EXYNOS4_GPX0(6), "GPX0");
+
+		gpio_direction_output(EXYNOS4_GPX0(6), 1);
+		mdelay(100);
+
+		gpio_set_value(EXYNOS4_GPX0(6), 0);
+		mdelay(10);
+
+		gpio_set_value(EXYNOS4_GPX0(6), 1);
+		mdelay(10);
+
+		gpio_free(EXYNOS4_GPX0(6));
+	} else {
+#if !defined(CONFIG_BACKLIGHT_PWM)
+		gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0");
+		gpio_free(EXYNOS4_GPD0(1));
+#endif
+	}
+}
+
+static struct plat_lcd_data smdkv310_lcd_lte480wv_data = {
+	.set_power		= lcd_lte480wv_set_power,
+};
+
+static struct platform_device smdkv310_lcd_lte480wv = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s5p_device_fimd0.dev,
+	.dev.platform_data	= &smdkv310_lcd_lte480wv_data,
+};
+
+static struct s3c_fb_pd_win smdkv310_fb_win0 = {
+	.win_mode = {
+		.left_margin	= 13,
+		.right_margin	= 8,
+		.upper_margin	= 7,
+		.lower_margin	= 5,
+		.hsync_len	= 3,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp		= 32,
+	.default_bpp		= 24,
+};
+
+static struct s3c_fb_platdata smdkv310_lcd0_pdata __initdata = {
+	.win[0]		= &smdkv310_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
+};
+
 static struct resource smdkv310_smsc911x_resources[] = {
 	[0] = {
 		.start	= EXYNOS4_PA_SROM_BANK(1),
@@ -188,6 +254,8 @@ static struct platform_device *smdkv310_devices[] __initdata = {
 	&exynos4_device_sysmmu,
 	&samsung_asoc_dma,
 	&samsung_asoc_idma,
+	&s5p_device_fimd0,
+	&smdkv310_lcd_lte480wv,
 	&smdkv310_smsc911x,
 	&exynos4_device_ahci,
 };
@@ -248,6 +316,7 @@ static void __init smdkv310_machine_init(void)
 	samsung_keypad_set_platdata(&smdkv310_keypad_data);
 
 	samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
+	s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata);
 
 	platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
 }
@@ -261,3 +330,12 @@ MACHINE_START(SMDKV310, "SMDKV310")
 	.init_machine	= smdkv310_machine_init,
 	.timer		= &exynos4_timer,
 MACHINE_END
+
+MACHINE_START(SMDKC210, "SMDKC210")
+	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.init_irq	= exynos4_init_irq,
+	.map_io		= smdkv310_map_io,
+	.init_machine	= smdkv310_machine_init,
+	.timer		= &exynos4_timer,
+MACHINE_END
-- 
cgit v1.2.3-18-g5258


From c06af3cc6a27991187fd513765fed943684d41bf Mon Sep 17 00:00:00 2001
From: Kukjin Kim <kgene.kim@samsung.com>
Date: Sat, 20 Aug 2011 02:18:18 +0900
Subject: ARM: SAMSUNG: Add support for detecting CPU at runtime

The soc_is_[name]() can be used to distinguish cpu at runtime.

This patch was originally from Changhwan Youn <chaos.youn@samsung.com>

Acked-by: Changhwan Youn <chaos.youn@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c64xx/cpu.c              | 18 +++----
 arch/arm/plat-s3c24xx/cpu.c              |  8 ++-
 arch/arm/plat-s5p/cpu.c                  | 26 +++++-----
 arch/arm/plat-samsung/include/plat/cpu.h | 87 +++++++++++++++++++++++++++++++-
 arch/arm/plat-samsung/init.c             |  1 +
 5 files changed, 110 insertions(+), 30 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c64xx/cpu.c b/arch/arm/mach-s3c64xx/cpu.c
index 374e45e566b..7b665f3e2e1 100644
--- a/arch/arm/mach-s3c64xx/cpu.c
+++ b/arch/arm/mach-s3c64xx/cpu.c
@@ -43,16 +43,16 @@ static const char name_s3c6410[] = "S3C6410";
 
 static struct cpu_table cpu_ids[] __initdata = {
 	{
-		.idcode		= 0x36400000,
-		.idmask		= 0xfffff000,
+		.idcode		= S3C6400_CPU_ID,
+		.idmask		= S3C64XX_CPU_MASK,
 		.map_io		= s3c6400_map_io,
 		.init_clocks	= s3c6400_init_clocks,
 		.init_uarts	= s3c6400_init_uarts,
 		.init		= s3c6400_init,
 		.name		= name_s3c6400,
 	}, {
-		.idcode		= 0x36410100,
-		.idmask		= 0xffffff00,
+		.idcode		= S3C6410_CPU_ID,
+		.idmask		= S3C64XX_CPU_MASK,
 		.map_io		= s3c6410_map_io,
 		.init_clocks	= s3c6410_init_clocks,
 		.init_uarts	= s3c6410_init_uarts,
@@ -140,22 +140,20 @@ void __init s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 
 void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
 {
-	unsigned long idcode;
-
 	/* initialise the io descriptors we need for initialisation */
 	iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
 	iotable_init(mach_desc, size);
 
-	idcode = __raw_readl(S3C_VA_SYS + 0x118);
-	if (!idcode) {
+	samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0x118);
+	if (!samsung_cpu_id) {
 		/* S3C6400 has the ID register in a different place,
 		 * and needs a write before it can be read. */
 
 		__raw_writel(0x0, S3C_VA_SYS + 0xA1C);
-		idcode = __raw_readl(S3C_VA_SYS + 0xA1C);
+		samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0xA1C);
 	}
 
-	s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
 }
 
 static __init int s3c64xx_sysdev_init(void)
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index c1fc6c6fac7..ead21a4a7f8 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -215,19 +215,17 @@ static void s3c24xx_pm_restart(char mode, const char *cmd)
 
 void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
 {
-	unsigned long idcode = 0x0;
-
 	/* initialise the io descriptors we need for initialisation */
 	iotable_init(mach_desc, size);
 	iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
 
 	if (cpu_architecture() >= CPU_ARCH_ARMv5) {
-		idcode = s3c24xx_read_idcode_v5();
+		samsung_cpu_id = s3c24xx_read_idcode_v5();
 	} else {
-		idcode = s3c24xx_read_idcode_v4();
+		samsung_cpu_id = s3c24xx_read_idcode_v4();
 	}
 
 	arm_pm_restart = s3c24xx_pm_restart;
 
-	s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
 }
diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c
index bbc2aa7449c..3ef67348211 100644
--- a/arch/arm/plat-s5p/cpu.c
+++ b/arch/arm/plat-s5p/cpu.c
@@ -36,40 +36,40 @@ static const char name_exynos4210[] = "EXYNOS4210";
 
 static struct cpu_table cpu_ids[] __initdata = {
 	{
-		.idcode		= 0x56440100,
-		.idmask		= 0xfffff000,
+		.idcode		= S5P6440_CPU_ID,
+		.idmask		= S5P64XX_CPU_MASK,
 		.map_io		= s5p6440_map_io,
 		.init_clocks	= s5p6440_init_clocks,
 		.init_uarts	= s5p6440_init_uarts,
 		.init		= s5p64x0_init,
 		.name		= name_s5p6440,
 	}, {
-		.idcode		= 0x36450000,
-		.idmask		= 0xfffff000,
+		.idcode		= S5P6450_CPU_ID,
+		.idmask		= S5P64XX_CPU_MASK,
 		.map_io		= s5p6450_map_io,
 		.init_clocks	= s5p6450_init_clocks,
 		.init_uarts	= s5p6450_init_uarts,
 		.init		= s5p64x0_init,
 		.name		= name_s5p6450,
 	}, {
-		.idcode		= 0x43100000,
-		.idmask		= 0xfffff000,
+		.idcode		= S5PC100_CPU_ID,
+		.idmask		= S5PC100_CPU_MASK,
 		.map_io		= s5pc100_map_io,
 		.init_clocks	= s5pc100_init_clocks,
 		.init_uarts	= s5pc100_init_uarts,
 		.init		= s5pc100_init,
 		.name		= name_s5pc100,
 	}, {
-		.idcode		= 0x43110000,
-		.idmask		= 0xfffff000,
+		.idcode		= S5PV210_CPU_ID,
+		.idmask		= S5PV210_CPU_MASK,
 		.map_io		= s5pv210_map_io,
 		.init_clocks	= s5pv210_init_clocks,
 		.init_uarts	= s5pv210_init_uarts,
 		.init		= s5pv210_init,
 		.name		= name_s5pv210,
 	}, {
-		.idcode		= 0x43210000,
-		.idmask		= 0xfffe0000,
+		.idcode		= EXYNOS4210_CPU_ID,
+		.idmask		= EXYNOS4_CPU_MASK,
 		.map_io		= exynos4_map_io,
 		.init_clocks	= exynos4_init_clocks,
 		.init_uarts	= exynos4_init_uarts,
@@ -114,13 +114,11 @@ static struct map_desc s5p_iodesc[] __initdata = {
 void __init s5p_init_io(struct map_desc *mach_desc,
 			int size, void __iomem *cpuid_addr)
 {
-	unsigned long idcode;
-
 	/* initialize the io descriptors we need for initialization */
 	iotable_init(s5p_iodesc, ARRAY_SIZE(s5p_iodesc));
 	if (mach_desc)
 		iotable_init(mach_desc, size);
 
-	idcode = __raw_readl(cpuid_addr);
-	s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+	samsung_cpu_id = __raw_readl(cpuid_addr);
+	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
 }
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index c0a5741b23e..bdf43ad3b5e 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -1,9 +1,12 @@
 /* linux/arch/arm/plat-samsung/include/plat/cpu.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
  *
  * Copyright (c) 2004-2005 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * Header file for S3C24XX CPU support
+ * Header file for Samsung CPU support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -15,6 +18,88 @@
 #ifndef __SAMSUNG_PLAT_CPU_H
 #define __SAMSUNG_PLAT_CPU_H
 
+extern unsigned long samsung_cpu_id;
+
+#define S3C24XX_CPU_ID		0x32400000
+#define S3C24XX_CPU_MASK	0xFFF00000
+
+#define S3C6400_CPU_ID		0x36400000
+#define S3C6410_CPU_ID		0x36410000
+#define S3C64XX_CPU_ID		(S3C6400_CPU_ID & S3C6410_CPU_ID)
+#define S3C64XX_CPU_MASK	0x1FF40000
+
+#define S5P6440_CPU_ID		0x56440000
+#define S5P6450_CPU_ID		0x36450000
+#define S5P64XX_CPU_MASK	0x1FF40000
+
+#define S5PC100_CPU_ID		0x43100000
+#define S5PC100_CPU_MASK	0xFFFFF000
+
+#define S5PV210_CPU_ID		0x43110000
+#define S5PV210_CPU_MASK	0xFFFFF000
+
+#define EXYNOS4210_CPU_ID	0x43210000
+#define EXYNOS4_CPU_MASK	0xFFFE0000
+
+#define IS_SAMSUNG_CPU(name, id, mask)		\
+static inline int is_samsung_##name(void)	\
+{						\
+	return ((samsung_cpu_id & mask) == (id & mask));	\
+}
+
+IS_SAMSUNG_CPU(s3c24xx, S3C24XX_CPU_ID, S3C24XX_CPU_MASK)
+IS_SAMSUNG_CPU(s3c64xx, S3C64XX_CPU_ID, S3C64XX_CPU_MASK)
+IS_SAMSUNG_CPU(s5p6440, S5P6440_CPU_ID, S5P64XX_CPU_MASK)
+IS_SAMSUNG_CPU(s5p6450, S5P6450_CPU_ID, S5P64XX_CPU_MASK)
+IS_SAMSUNG_CPU(s5pc100, S5PC100_CPU_ID, S5PC100_CPU_MASK)
+IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK)
+IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
+
+#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
+    defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \
+    defined(CONFIG_CPU_S3C2442) || defined(CONFIG_CPU_S3C244X) || \
+    defined(CONFIG_CPU_S3C2443)
+# define soc_is_s3c24xx()	is_samsung_s3c24xx()
+#else
+# define soc_is_s3c24xx()	0
+#endif
+
+#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
+# define soc_is_s3c64xx()	is_samsung_s3c64xx()
+#else
+# define soc_is_s3c64xx()	0
+#endif
+
+#if defined(CONFIG_CPU_S5P6440)
+# define soc_is_s5p6440()	is_samsung_s5p6440()
+#else
+# define soc_is_s5p6440()	0
+#endif
+
+#if defined(CONFIG_CPU_S5P6450)
+# define soc_is_s5p6450()	is_samsung_s5p6450()
+#else
+# define soc_is_s5p6450()	0
+#endif
+
+#if defined(CONFIG_CPU_S5PC100)
+# define soc_is_s5pc100()	is_samsung_s5pc100()
+#else
+# define soc_is_s5pc100()	0
+#endif
+
+#if defined(CONFIG_CPU_S5PV210)
+# define soc_is_s5pv210()	is_samsung_s5pv210()
+#else
+# define soc_is_s5pv210()	0
+#endif
+
+#if defined(CONFIG_CPU_EXYNOS4210)
+# define soc_is_exynos4210()	is_samsung_exynos4210()
+#else
+# define soc_is_exynos4210()	0
+#endif
+
 #define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
 
 #ifndef MHZ
diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/plat-samsung/init.c
index 79d10fca909..40b1228adb8 100644
--- a/arch/arm/plat-samsung/init.c
+++ b/arch/arm/plat-samsung/init.c
@@ -30,6 +30,7 @@
 #include <plat/regs-serial.h>
 
 static struct cpu_table *cpu;
+unsigned long samsung_cpu_id;
 
 static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode,
 						struct cpu_table *tab,
-- 
cgit v1.2.3-18-g5258


From a3d9358406b7529373ccafbf6d264f811884959c Mon Sep 17 00:00:00 2001
From: Kukjin Kim <kgene.kim@samsung.com>
Date: Sat, 20 Aug 2011 02:30:08 +0900
Subject: ARM: S5P64X0: Use soc_is_s5p64x0() to distinguish cpu at runtime

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s5p64x0/dev-spi.c  | 8 +++-----
 arch/arm/mach-s5p64x0/dma.c      | 7 ++-----
 arch/arm/mach-s5p64x0/gpiolib.c  | 7 ++-----
 arch/arm/mach-s5p64x0/irq-eint.c | 3 ++-
 4 files changed, 9 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s5p64x0/dev-spi.c b/arch/arm/mach-s5p64x0/dev-spi.c
index ac825e82632..1fd9c79c7db 100644
--- a/arch/arm/mach-s5p64x0/dev-spi.c
+++ b/arch/arm/mach-s5p64x0/dev-spi.c
@@ -21,6 +21,7 @@
 #include <mach/regs-clock.h>
 #include <mach/spi-clocks.h>
 
+#include <plat/cpu.h>
 #include <plat/s3c64xx-spi.h>
 #include <plat/gpio-cfg.h>
 
@@ -185,11 +186,8 @@ struct platform_device s5p64x0_device_spi1 = {
 
 void __init s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
 {
-	unsigned int id;
 	struct s3c64xx_spi_info *pd;
 
-	id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000;
-
 	/* Reject invalid configuration */
 	if (!num_cs || src_clk_nr < 0
 			|| src_clk_nr > S5P64X0_SPI_SRCCLK_SCLK) {
@@ -199,7 +197,7 @@ void __init s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
 
 	switch (cntrlr) {
 	case 0:
-		if (id == 0x50000)
+		if (soc_is_s5p6450())
 			pd = &s5p6450_spi0_pdata;
 		else
 			pd = &s5p6440_spi0_pdata;
@@ -207,7 +205,7 @@ void __init s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
 		s5p64x0_device_spi0.dev.platform_data = pd;
 		break;
 	case 1:
-		if (id == 0x50000)
+		if (soc_is_s5p6450())
 			pd = &s5p6450_spi1_pdata;
 		else
 			pd = &s5p6440_spi1_pdata;
diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c
index d7ad944b347..0e5b3e63e5b 100644
--- a/arch/arm/mach-s5p64x0/dma.c
+++ b/arch/arm/mach-s5p64x0/dma.c
@@ -28,6 +28,7 @@
 #include <mach/irqs.h>
 #include <mach/regs-clock.h>
 
+#include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/s3c-pl330-pdata.h>
 
@@ -133,11 +134,7 @@ static struct platform_device s5p64x0_device_pdma = {
 
 static int __init s5p64x0_dma_init(void)
 {
-	unsigned int id;
-
-	id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000;
-
-	if (id == 0x50000)
+	if (soc_is_s5p6450())
 		s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata;
 	else
 		s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata;
diff --git a/arch/arm/mach-s5p64x0/gpiolib.c b/arch/arm/mach-s5p64x0/gpiolib.c
index e7fb3b004e7..700dac6c43f 100644
--- a/arch/arm/mach-s5p64x0/gpiolib.c
+++ b/arch/arm/mach-s5p64x0/gpiolib.c
@@ -19,6 +19,7 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-clock.h>
 
+#include <plat/cpu.h>
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
 #include <plat/gpio-cfg-helpers.h>
@@ -473,14 +474,10 @@ static void __init s5p64x0_gpio_add_rbank_4bit2(struct s3c_gpio_chip *chip,
 
 static int __init s5p64x0_gpiolib_init(void)
 {
-	unsigned int chipid;
-
-	chipid = __raw_readl(S5P64X0_SYS_ID);
-
 	s5p64x0_gpiolib_set_cfg(s5p64x0_gpio_cfgs,
 				ARRAY_SIZE(s5p64x0_gpio_cfgs));
 
-	if ((chipid & 0xff000) == 0x50000) {
+	if (soc_is_s5p6450()) {
 		samsung_gpiolib_add_2bit_chips(s5p6450_gpio_2bit,
 					ARRAY_SIZE(s5p6450_gpio_2bit));
 
diff --git a/arch/arm/mach-s5p64x0/irq-eint.c b/arch/arm/mach-s5p64x0/irq-eint.c
index 69ed4545112..94104c49959 100644
--- a/arch/arm/mach-s5p64x0/irq-eint.c
+++ b/arch/arm/mach-s5p64x0/irq-eint.c
@@ -17,6 +17,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 
+#include <plat/cpu.h>
 #include <plat/regs-irqtype.h>
 #include <plat/gpio-cfg.h>
 
@@ -67,7 +68,7 @@ static int s5p64x0_irq_eint_set_type(struct irq_data *data, unsigned int type)
 	__raw_writel(ctrl, S5P64X0_EINT0CON0);
 
 	/* Configure the GPIO pin for 6450 or 6440 based on CPU ID */
-	if (0x50000 == (__raw_readl(S5P64X0_SYS_ID) & 0xFF000))
+	if (soc_is_s5p6450())
 		s3c_gpio_cfgpin(S5P6450_GPN(offs), S3C_GPIO_SFN(2));
 	else
 		s3c_gpio_cfgpin(S5P6440_GPN(offs), S3C_GPIO_SFN(2));
-- 
cgit v1.2.3-18-g5258


From e6d1cb9f1fffd7e300af6d8f6731a486d6255e3f Mon Sep 17 00:00:00 2001
From: Kukjin Kim <kgene.kim@samsung.com>
Date: Sat, 20 Aug 2011 12:18:07 +0900
Subject: ARM: SAMSUNG: Add support for handling of cpu revision

This patch adds plat-samsung/cpu.c for detecting of cpu id and
silicon revision.

This patch was originally from Changhwan Youn <chaos.youn@samsung.com>

Acked-by: Changhwan Youn <chaos.youn@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c64xx/cpu.c              | 10 ++----
 arch/arm/plat-s3c24xx/cpu.c              |  1 +
 arch/arm/plat-s5p/cpu.c                  |  4 ++-
 arch/arm/plat-samsung/Makefile           |  2 +-
 arch/arm/plat-samsung/cpu.c              | 58 ++++++++++++++++++++++++++++++++
 arch/arm/plat-samsung/include/plat/cpu.h |  4 +++
 arch/arm/plat-samsung/init.c             |  1 -
 7 files changed, 69 insertions(+), 11 deletions(-)
 create mode 100644 arch/arm/plat-samsung/cpu.c

(limited to 'arch')

diff --git a/arch/arm/mach-s3c64xx/cpu.c b/arch/arm/mach-s3c64xx/cpu.c
index 7b665f3e2e1..6c498f9a18c 100644
--- a/arch/arm/mach-s3c64xx/cpu.c
+++ b/arch/arm/mach-s3c64xx/cpu.c
@@ -144,14 +144,8 @@ void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
 	iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
 	iotable_init(mach_desc, size);
 
-	samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0x118);
-	if (!samsung_cpu_id) {
-		/* S3C6400 has the ID register in a different place,
-		 * and needs a write before it can be read. */
-
-		__raw_writel(0x0, S3C_VA_SYS + 0xA1C);
-		samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0xA1C);
-	}
+	/* detect cpu id */
+	s3c64xx_init_cpu();
 
 	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
 }
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index ead21a4a7f8..3c6335307fb 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -224,6 +224,7 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
 	} else {
 		samsung_cpu_id = s3c24xx_read_idcode_v4();
 	}
+	s3c24xx_init_cpu();
 
 	arm_pm_restart = s3c24xx_pm_restart;
 
diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c
index 3ef67348211..04392c70d05 100644
--- a/arch/arm/plat-s5p/cpu.c
+++ b/arch/arm/plat-s5p/cpu.c
@@ -119,6 +119,8 @@ void __init s5p_init_io(struct map_desc *mach_desc,
 	if (mach_desc)
 		iotable_init(mach_desc, size);
 
-	samsung_cpu_id = __raw_readl(cpuid_addr);
+	/* detect cpu id and rev. */
+	s5p_init_cpu(cpuid_addr);
+
 	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
 }
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 853764ba8cc..3de756da5ea 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -11,7 +11,7 @@ obj-				:=
 
 # Objects we always build independent of SoC choice
 
-obj-y				+= init.o
+obj-y				+= init.o cpu.o
 obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET)   += time.o
 obj-y				+= clock.o
 obj-y				+= pwm-clock.o
diff --git a/arch/arm/plat-samsung/cpu.c b/arch/arm/plat-samsung/cpu.c
new file mode 100644
index 00000000000..81c06d44c11
--- /dev/null
+++ b/arch/arm/plat-samsung/cpu.c
@@ -0,0 +1,58 @@
+/* linux/arch/arm/plat-samsung/cpu.c
+ *
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung CPU Support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+
+#include <mach/map.h>
+#include <plat/cpu.h>
+
+unsigned long samsung_cpu_id;
+static unsigned int samsung_cpu_rev;
+
+unsigned int samsung_rev(void)
+{
+	return samsung_cpu_rev;
+}
+EXPORT_SYMBOL(samsung_rev);
+
+void __init s3c24xx_init_cpu(void)
+{
+	/* nothing here yet */
+
+	samsung_cpu_rev = 0;
+}
+
+void __init s3c64xx_init_cpu(void)
+{
+	samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0x118);
+	if (!samsung_cpu_id) {
+		/*
+		 * S3C6400 has the ID register in a different place,
+		 * and needs a write before it can be read.
+		 */
+		__raw_writel(0x0, S3C_VA_SYS + 0xA1C);
+		samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0xA1C);
+	}
+
+	samsung_cpu_rev = 0;
+}
+
+void __init s5p_init_cpu(void __iomem *cpuid_addr)
+{
+	samsung_cpu_id = __raw_readl(cpuid_addr);
+	samsung_cpu_rev = samsung_cpu_id & 0xFF;
+}
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index bdf43ad3b5e..c22d110a196 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -140,6 +140,10 @@ extern void s3c64xx_init_io(struct map_desc *mach_desc, int size);
 extern void s5p_init_io(struct map_desc *mach_desc,
 			int size, void __iomem *cpuid_addr);
 
+extern void s3c24xx_init_cpu(void);
+extern void s3c64xx_init_cpu(void);
+extern void s5p_init_cpu(void __iomem *cpuid_addr);
+
 extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 
 extern void s3c24xx_init_clocks(int xtal);
diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/plat-samsung/init.c
index 40b1228adb8..79d10fca909 100644
--- a/arch/arm/plat-samsung/init.c
+++ b/arch/arm/plat-samsung/init.c
@@ -30,7 +30,6 @@
 #include <plat/regs-serial.h>
 
 static struct cpu_table *cpu;
-unsigned long samsung_cpu_id;
 
 static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode,
 						struct cpu_table *tab,
-- 
cgit v1.2.3-18-g5258


From 56b209227a87b718450e917df904e627ddfca146 Mon Sep 17 00:00:00 2001
From: Kukjin Kim <kgene.kim@samsung.com>
Date: Sat, 20 Aug 2011 13:41:21 +0900
Subject: ARM: EXYNOS4: Use samsung_rev() to distinguish silicon revision

This patch uses samsung_rev() to support variable silicon revision of
EXYNOS4210 so that can support for EXYNOS4210 REV0, REV1.0 and REV1.1.

Note: Need to change timer setting on REV0.

Acked-by: Changhwan Youn <chaos.youn@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/cpu.c              | 28 +++++++++++++++++++++++-----
 arch/arm/mach-exynos4/include/mach/map.h |  3 ++-
 arch/arm/mach-exynos4/platsmp.c          |  8 ++++++--
 arch/arm/plat-samsung/include/plat/cpu.h |  6 ++++++
 4 files changed, 37 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c
index 2d8a40c9e6e..dbc358d7554 100644
--- a/arch/arm/mach-exynos4/cpu.c
+++ b/arch/arm/mach-exynos4/cpu.c
@@ -42,11 +42,6 @@ static struct map_desc exynos4_iodesc[] __initdata = {
 		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSTIMER),
 		.length		= SZ_4K,
 		.type	 	= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_SYSRAM,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSRAM),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
 	}, {
 		.virtual	= (unsigned long)S5P_VA_CMU,
 		.pfn		= __phys_to_pfn(EXYNOS4_PA_CMU),
@@ -120,6 +115,24 @@ static struct map_desc exynos4_iodesc[] __initdata = {
 	},
 };
 
+static struct map_desc exynos4_iodesc0[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_SYSRAM,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSRAM0),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct map_desc exynos4_iodesc1[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_SYSRAM,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSRAM1),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
 static void exynos4_idle(void)
 {
 	if (!need_resched())
@@ -137,6 +150,11 @@ void __init exynos4_map_io(void)
 {
 	iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
 
+	if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0)
+		iotable_init(exynos4_iodesc0, ARRAY_SIZE(exynos4_iodesc0));
+	else
+		iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1));
+
 	/* initialize device information early */
 	exynos4_default_sdhci0();
 	exynos4_default_sdhci1();
diff --git a/arch/arm/mach-exynos4/include/mach/map.h b/arch/arm/mach-exynos4/include/mach/map.h
index d32296dc65e..7073ac73085 100644
--- a/arch/arm/mach-exynos4/include/mach/map.h
+++ b/arch/arm/mach-exynos4/include/mach/map.h
@@ -23,7 +23,8 @@
 
 #include <plat/map-s5p.h>
 
-#define EXYNOS4_PA_SYSRAM		0x02020000
+#define EXYNOS4_PA_SYSRAM0		0x02025000
+#define EXYNOS4_PA_SYSRAM1		0x02020000
 
 #define EXYNOS4_PA_FIMC0		0x11800000
 #define EXYNOS4_PA_FIMC1		0x11810000
diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos4/platsmp.c
index 7c2282c6ba8..96cc6513b12 100644
--- a/arch/arm/mach-exynos4/platsmp.c
+++ b/arch/arm/mach-exynos4/platsmp.c
@@ -30,9 +30,12 @@
 #include <mach/regs-clock.h>
 #include <mach/regs-pmu.h>
 
+#include <plat/cpu.h>
+
 extern void exynos4_secondary_startup(void);
 
-#define CPU1_BOOT_REG S5P_VA_SYSRAM
+#define CPU1_BOOT_REG		(samsung_rev() == EXYNOS4210_REV_1_1 ? \
+				S5P_INFORM5 : S5P_VA_SYSRAM)
 
 /*
  * control for which core is the next to come out of the secondary
@@ -216,5 +219,6 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus)
 	 * until it receives a soft interrupt, and then the
 	 * secondary CPU branches to this address.
 	 */
-	__raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)), S5P_VA_SYSRAM);
+	__raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)),
+			CPU1_BOOT_REG);
 }
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index c22d110a196..6fdd5ef5e7b 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -100,6 +100,10 @@ IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
 # define soc_is_exynos4210()	0
 #endif
 
+#define EXYNOS4210_REV_0	(0x0)
+#define EXYNOS4210_REV_1_0	(0x10)
+#define EXYNOS4210_REV_1_1	(0x11)
+
 #define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
 
 #ifndef MHZ
@@ -144,6 +148,8 @@ extern void s3c24xx_init_cpu(void);
 extern void s3c64xx_init_cpu(void);
 extern void s5p_init_cpu(void __iomem *cpuid_addr);
 
+extern unsigned int samsung_rev(void);
+
 extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 
 extern void s3c24xx_init_clocks(int xtal);
-- 
cgit v1.2.3-18-g5258


From f1c39625d63c9f8eba8f036429c10a9cb9e32920 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Wed, 24 Aug 2011 09:54:24 -0700
Subject: xen: use non-tracing preempt in xen_clocksource_read()

The tracing code used sched_clock() to get tracing timestamps, which
ends up calling xen_clocksource_read().  xen_clocksource_read() must
disable preemption, but if preemption tracing is enabled, this results
in infinite recursion.

I've only noticed this when boot-time tracing tests are enabled, but it
seems like a generic bug.  It looks like it would also affect
kvm_clocksource_read().

Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
---
 arch/x86/xen/time.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c
index 5158c505bef..163b4679556 100644
--- a/arch/x86/xen/time.c
+++ b/arch/x86/xen/time.c
@@ -168,9 +168,10 @@ cycle_t xen_clocksource_read(void)
         struct pvclock_vcpu_time_info *src;
 	cycle_t ret;
 
-	src = &get_cpu_var(xen_vcpu)->time;
+	preempt_disable_notrace();
+	src = &__get_cpu_var(xen_vcpu)->time;
 	ret = pvclock_clocksource_read(src);
-	put_cpu_var(xen_vcpu);
+	preempt_enable_notrace();
 	return ret;
 }
 
-- 
cgit v1.2.3-18-g5258


From 47850a27306997be914dedcbca1dfce09fa4ef0a Mon Sep 17 00:00:00 2001
From: Viresh Kumar <viresh.kumar@st.com>
Date: Fri, 5 Aug 2011 15:32:26 +0530
Subject: ARM: asm/pl080.h: Protect against multiple inclusion of header file

<asm/hardware/pl080.h> doesn't have protection to deal with multiple inclusion.
And so we get compilation errors in cases where this file is included more than
once. This patch adds #ifdefs at the top of file to protect it against multiple
inclusions.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 arch/arm/include/asm/hardware/pl080.h | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/include/asm/hardware/pl080.h b/arch/arm/include/asm/hardware/pl080.h
index e4a04e4e562..33c78d7af2e 100644
--- a/arch/arm/include/asm/hardware/pl080.h
+++ b/arch/arm/include/asm/hardware/pl080.h
@@ -21,6 +21,9 @@
  * OneNAND features.
 */
 
+#ifndef ASM_PL080_H
+#define ASM_PL080_H
+
 #define PL080_INT_STATUS			(0x00)
 #define PL080_TC_STATUS				(0x04)
 #define PL080_TC_CLEAR				(0x08)
@@ -138,3 +141,4 @@ struct pl080s_lli {
 	u32	control1;
 };
 
+#endif /* ASM_PL080_H */
-- 
cgit v1.2.3-18-g5258


From 2747f5e56564e715810038a1a2d8f4041f866558 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Mon, 5 Sep 2011 19:11:40 +0900
Subject: ARM: SAMSUNG: Fix mask for S3C64xx CPU IDs

The difference in CPU ID between S3C6400 and S3C6410 is a single bit and
that bit wasn't included in the mask causing the S3C6410 to be misdetected
as a S3C6400.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
[kgene.kim@samsung.com: changed the value]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/plat-samsung/include/plat/cpu.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 6fdd5ef5e7b..6070c6b0020 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -26,7 +26,7 @@ extern unsigned long samsung_cpu_id;
 #define S3C6400_CPU_ID		0x36400000
 #define S3C6410_CPU_ID		0x36410000
 #define S3C64XX_CPU_ID		(S3C6400_CPU_ID & S3C6410_CPU_ID)
-#define S3C64XX_CPU_MASK	0x1FF40000
+#define S3C64XX_CPU_MASK	0xFFFFF000
 
 #define S5P6440_CPU_ID		0x56440000
 #define S5P6450_CPU_ID		0x36450000
-- 
cgit v1.2.3-18-g5258


From b02b5da4d15d7f7a250888d003121e1b5b69d00b Mon Sep 17 00:00:00 2001
From: Ajay Kumar <ajaykumar.rs@samsung.com>
Date: Mon, 5 Sep 2011 19:12:47 +0900
Subject: ARM: SAMSUNG: Fix mask value for S5P64X0 CPU IDs

The current value for S5P64XX_CPU_MASK does not include the necessary
bits, which causes detection failure.

Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
[kgene.kim@samsung.com: changed the value]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/plat-samsung/include/plat/cpu.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 6070c6b0020..efd920ec3b7 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -30,7 +30,7 @@ extern unsigned long samsung_cpu_id;
 
 #define S5P6440_CPU_ID		0x56440000
 #define S5P6450_CPU_ID		0x36450000
-#define S5P64XX_CPU_MASK	0x1FF40000
+#define S5P64XX_CPU_MASK	0xFFFFF000
 
 #define S5PC100_CPU_ID		0x43100000
 #define S5PC100_CPU_MASK	0xFFFFF000
-- 
cgit v1.2.3-18-g5258


From f10cd522c5fbfec9ae3cc01967868c9c2401ed23 Mon Sep 17 00:00:00 2001
From: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Date: Tue, 6 Sep 2011 17:41:47 +0100
Subject: xen: disable PV spinlocks on HVM

PV spinlocks cannot possibly work with the current code because they are
enabled after pvops patching has already been done, and because PV
spinlocks use a different data structure than native spinlocks so we
cannot switch between them dynamically. A spinlock that has been taken
once by the native code (__ticket_spin_lock) cannot be taken by
__xen_spin_lock even after it has been released.

Reported-and-Tested-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
 arch/x86/xen/smp.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index d4fc6d454f8..041d4fe9dfe 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -532,7 +532,6 @@ static void __init xen_hvm_smp_prepare_cpus(unsigned int max_cpus)
 	WARN_ON(xen_smp_intr_init(0));
 
 	xen_init_lock_cpu(0);
-	xen_init_spinlocks();
 }
 
 static int __cpuinit xen_hvm_cpu_up(unsigned int cpu)
-- 
cgit v1.2.3-18-g5258


From e3b73c4a25e9a5705b4ef28b91676caf01f9bc9f Mon Sep 17 00:00:00 2001
From: David Vrabel <david.vrabel@citrix.com>
Date: Tue, 13 Sep 2011 10:17:32 -0400
Subject: xen/e820: if there is no dom0_mem=, don't tweak extra_pages.

The patch "xen: use maximum reservation to limit amount of usable RAM"
(d312ae878b6aed3912e1acaaf5d0b2a9d08a4f11) breaks machines that
do not use 'dom0_mem=' argument with:

reserve RAM buffer: 000000133f2e2000 - 000000133fffffff
(XEN) mm.c:4976:d0 Global bit is set to kernel page fffff8117e
(XEN) domain_crash_sync called from entry.S
(XEN) Domain 0 (vcpu#0) crashed on cpu#0:
...

The reason being that the last E820 entry is created using the
'extra_pages' (which is based on how many pages have been freed).
The mentioned git commit sets the initial value of 'extra_pages'
using a hypercall which returns the number of pages (if dom0_mem
has been used) or -1 otherwise. If the later we return with
MAX_DOMAIN_PAGES as basis for calculation:

    return min(max_pages, MAX_DOMAIN_PAGES);

and use it:

     extra_limit = xen_get_max_pages();
     if (extra_limit >= max_pfn)
             extra_pages = extra_limit - max_pfn;
     else
             extra_pages = 0;

which means we end up with extra_pages = 128GB in PFNs (33554432)
- 8GB in PFNs (2097152, on this specific box, can be larger or smaller),
and then we add that value to the E820 making it:

  Xen: 00000000ff000000 - 0000000100000000 (reserved)
  Xen: 0000000100000000 - 000000133f2e2000 (usable)

which is clearly wrong. It should look as so:

  Xen: 00000000ff000000 - 0000000100000000 (reserved)
  Xen: 0000000100000000 - 000000027fbda000 (usable)

Naturally this problem does not present itself if dom0_mem=max:X
is used.

CC: stable@kernel.org
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
 arch/x86/xen/setup.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index ff3dfa17681..09688eb4a89 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -305,10 +305,12 @@ char * __init xen_memory_setup(void)
 	sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
 
 	extra_limit = xen_get_max_pages();
-	if (extra_limit >= max_pfn)
-		extra_pages = extra_limit - max_pfn;
-	else
-		extra_pages = 0;
+	if (max_pfn + extra_pages > extra_limit) {
+		if (extra_limit > max_pfn)
+			extra_pages = extra_limit - max_pfn;
+		else
+			extra_pages = 0;
+	}
 
 	extra_pages += xen_return_unused_memory(xen_start_info->nr_pages, &e820);
 
-- 
cgit v1.2.3-18-g5258


From aa0de00e4b9b3adba5db5ef5ee01e61b1b2e4329 Mon Sep 17 00:00:00 2001
From: Boojin Kim <boojin.kim@samsung.com>
Date: Fri, 2 Sep 2011 09:44:34 +0900
Subject: ARM: SAMSUNG: Update to use PL330-DMA driver

This patch adds to support PL330-DMA driver on DMADEVICE for S5P SoCs.

Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 arch/arm/mach-exynos4/include/mach/dma.h           |  4 +-
 arch/arm/mach-s5p64x0/include/mach/dma.h           |  2 +-
 arch/arm/mach-s5pc100/include/mach/dma.h           |  2 +-
 arch/arm/mach-s5pv210/include/mach/dma.h           |  2 +-
 arch/arm/plat-samsung/Kconfig                      |  9 ++
 arch/arm/plat-samsung/include/plat/dma-pl330.h     | 98 ++++++++++++++++++++++
 arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h | 98 ----------------------
 .../plat-samsung/include/plat/s3c-pl330-pdata.h    |  2 +-
 8 files changed, 113 insertions(+), 104 deletions(-)
 create mode 100644 arch/arm/plat-samsung/include/plat/dma-pl330.h
 delete mode 100644 arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/include/mach/dma.h b/arch/arm/mach-exynos4/include/mach/dma.h
index 81209eb1409..201842a3769 100644
--- a/arch/arm/mach-exynos4/include/mach/dma.h
+++ b/arch/arm/mach-exynos4/include/mach/dma.h
@@ -20,7 +20,7 @@
 #ifndef __MACH_DMA_H
 #define __MACH_DMA_H
 
-/* This platform uses the common S3C DMA API driver for PL330 */
-#include <plat/s3c-dma-pl330.h>
+/* This platform uses the common DMA API driver for PL330 */
+#include <plat/dma-pl330.h>
 
 #endif /* __MACH_DMA_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/dma.h b/arch/arm/mach-s5p64x0/include/mach/dma.h
index 81209eb1409..1beae2cca6a 100644
--- a/arch/arm/mach-s5p64x0/include/mach/dma.h
+++ b/arch/arm/mach-s5p64x0/include/mach/dma.h
@@ -21,6 +21,6 @@
 #define __MACH_DMA_H
 
 /* This platform uses the common S3C DMA API driver for PL330 */
-#include <plat/s3c-dma-pl330.h>
+#include <plat/dma-pl330.h>
 
 #endif /* __MACH_DMA_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/dma.h b/arch/arm/mach-s5pc100/include/mach/dma.h
index 81209eb1409..1beae2cca6a 100644
--- a/arch/arm/mach-s5pc100/include/mach/dma.h
+++ b/arch/arm/mach-s5pc100/include/mach/dma.h
@@ -21,6 +21,6 @@
 #define __MACH_DMA_H
 
 /* This platform uses the common S3C DMA API driver for PL330 */
-#include <plat/s3c-dma-pl330.h>
+#include <plat/dma-pl330.h>
 
 #endif /* __MACH_DMA_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/dma.h b/arch/arm/mach-s5pv210/include/mach/dma.h
index 81209eb1409..1beae2cca6a 100644
--- a/arch/arm/mach-s5pv210/include/mach/dma.h
+++ b/arch/arm/mach-s5pv210/include/mach/dma.h
@@ -21,6 +21,6 @@
 #define __MACH_DMA_H
 
 /* This platform uses the common S3C DMA API driver for PL330 */
-#include <plat/s3c-dma-pl330.h>
+#include <plat/dma-pl330.h>
 
 #endif /* __MACH_DMA_H */
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index b3e10659e4b..e6f01ab8620 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -306,6 +306,15 @@ config S3C_PL330_DMA
 	help
 	  S3C DMA API Driver for PL330 DMAC.
 
+config SAMSUNG_DMADEV
+	bool
+	select DMADEVICES
+	select PL330_DMA if (CPU_EXYNOS4210 || CPU_S5PV210 || CPU_S5PC100 || \
+					CPU_S5P6450 || CPU_S5P6440)
+	select ARM_AMBA
+	help
+	  Use DMA device engine for PL330 DMAC.
+
 comment "Power management"
 
 config SAMSUNG_PM_DEBUG
diff --git a/arch/arm/plat-samsung/include/plat/dma-pl330.h b/arch/arm/plat-samsung/include/plat/dma-pl330.h
new file mode 100644
index 00000000000..0a5dade0e85
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/dma-pl330.h
@@ -0,0 +1,98 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DMA_PL330_H_
+#define __DMA_PL330_H_ __FILE__
+
+#define S3C2410_DMAF_AUTOSTART		(1 << 0)
+#define S3C2410_DMAF_CIRCULAR		(1 << 1)
+
+/*
+ * PL330 can assign any channel to communicate with
+ * any of the peripherals attched to the DMAC.
+ * For the sake of consistency across client drivers,
+ * We keep the channel names unchanged and only add
+ * missing peripherals are added.
+ * Order is not important since DMA PL330 API driver
+ * use these just as IDs.
+ */
+enum dma_ch {
+	DMACH_UART0_RX,
+	DMACH_UART0_TX,
+	DMACH_UART1_RX,
+	DMACH_UART1_TX,
+	DMACH_UART2_RX,
+	DMACH_UART2_TX,
+	DMACH_UART3_RX,
+	DMACH_UART3_TX,
+	DMACH_UART4_RX,
+	DMACH_UART4_TX,
+	DMACH_UART5_RX,
+	DMACH_UART5_TX,
+	DMACH_USI_RX,
+	DMACH_USI_TX,
+	DMACH_IRDA,
+	DMACH_I2S0_RX,
+	DMACH_I2S0_TX,
+	DMACH_I2S0S_TX,
+	DMACH_I2S1_RX,
+	DMACH_I2S1_TX,
+	DMACH_I2S2_RX,
+	DMACH_I2S2_TX,
+	DMACH_SPI0_RX,
+	DMACH_SPI0_TX,
+	DMACH_SPI1_RX,
+	DMACH_SPI1_TX,
+	DMACH_SPI2_RX,
+	DMACH_SPI2_TX,
+	DMACH_AC97_MICIN,
+	DMACH_AC97_PCMIN,
+	DMACH_AC97_PCMOUT,
+	DMACH_EXTERNAL,
+	DMACH_PWM,
+	DMACH_SPDIF,
+	DMACH_HSI_RX,
+	DMACH_HSI_TX,
+	DMACH_PCM0_TX,
+	DMACH_PCM0_RX,
+	DMACH_PCM1_TX,
+	DMACH_PCM1_RX,
+	DMACH_PCM2_TX,
+	DMACH_PCM2_RX,
+	DMACH_MSM_REQ3,
+	DMACH_MSM_REQ2,
+	DMACH_MSM_REQ1,
+	DMACH_MSM_REQ0,
+	DMACH_SLIMBUS0_RX,
+	DMACH_SLIMBUS0_TX,
+	DMACH_SLIMBUS0AUX_RX,
+	DMACH_SLIMBUS0AUX_TX,
+	DMACH_SLIMBUS1_RX,
+	DMACH_SLIMBUS1_TX,
+	DMACH_SLIMBUS2_RX,
+	DMACH_SLIMBUS2_TX,
+	DMACH_SLIMBUS3_RX,
+	DMACH_SLIMBUS3_TX,
+	DMACH_SLIMBUS4_RX,
+	DMACH_SLIMBUS4_TX,
+	DMACH_SLIMBUS5_RX,
+	DMACH_SLIMBUS5_TX,
+	/* END Marker, also used to denote a reserved channel */
+	DMACH_MAX,
+};
+
+static inline bool s3c_dma_has_circular(void)
+{
+	return true;
+}
+
+#include <plat/dma.h>
+
+#endif	/* __DMA_PL330_H_ */
diff --git a/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h b/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h
deleted file mode 100644
index 81074421312..00000000000
--- a/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef	__S3C_DMA_PL330_H_
-#define	__S3C_DMA_PL330_H_
-
-#define S3C2410_DMAF_AUTOSTART		(1 << 0)
-#define S3C2410_DMAF_CIRCULAR		(1 << 1)
-
-/*
- * PL330 can assign any channel to communicate with
- * any of the peripherals attched to the DMAC.
- * For the sake of consistency across client drivers,
- * We keep the channel names unchanged and only add
- * missing peripherals are added.
- * Order is not important since S3C PL330 API driver
- * use these just as IDs.
- */
-enum dma_ch {
-	DMACH_UART0_RX,
-	DMACH_UART0_TX,
-	DMACH_UART1_RX,
-	DMACH_UART1_TX,
-	DMACH_UART2_RX,
-	DMACH_UART2_TX,
-	DMACH_UART3_RX,
-	DMACH_UART3_TX,
-	DMACH_UART4_RX,
-	DMACH_UART4_TX,
-	DMACH_UART5_RX,
-	DMACH_UART5_TX,
-	DMACH_USI_RX,
-	DMACH_USI_TX,
-	DMACH_IRDA,
-	DMACH_I2S0_RX,
-	DMACH_I2S0_TX,
-	DMACH_I2S0S_TX,
-	DMACH_I2S1_RX,
-	DMACH_I2S1_TX,
-	DMACH_I2S2_RX,
-	DMACH_I2S2_TX,
-	DMACH_SPI0_RX,
-	DMACH_SPI0_TX,
-	DMACH_SPI1_RX,
-	DMACH_SPI1_TX,
-	DMACH_SPI2_RX,
-	DMACH_SPI2_TX,
-	DMACH_AC97_MICIN,
-	DMACH_AC97_PCMIN,
-	DMACH_AC97_PCMOUT,
-	DMACH_EXTERNAL,
-	DMACH_PWM,
-	DMACH_SPDIF,
-	DMACH_HSI_RX,
-	DMACH_HSI_TX,
-	DMACH_PCM0_TX,
-	DMACH_PCM0_RX,
-	DMACH_PCM1_TX,
-	DMACH_PCM1_RX,
-	DMACH_PCM2_TX,
-	DMACH_PCM2_RX,
-	DMACH_MSM_REQ3,
-	DMACH_MSM_REQ2,
-	DMACH_MSM_REQ1,
-	DMACH_MSM_REQ0,
-	DMACH_SLIMBUS0_RX,
-	DMACH_SLIMBUS0_TX,
-	DMACH_SLIMBUS0AUX_RX,
-	DMACH_SLIMBUS0AUX_TX,
-	DMACH_SLIMBUS1_RX,
-	DMACH_SLIMBUS1_TX,
-	DMACH_SLIMBUS2_RX,
-	DMACH_SLIMBUS2_TX,
-	DMACH_SLIMBUS3_RX,
-	DMACH_SLIMBUS3_TX,
-	DMACH_SLIMBUS4_RX,
-	DMACH_SLIMBUS4_TX,
-	DMACH_SLIMBUS5_RX,
-	DMACH_SLIMBUS5_TX,
-	/* END Marker, also used to denote a reserved channel */
-	DMACH_MAX,
-};
-
-static inline bool s3c_dma_has_circular(void)
-{
-	return true;
-}
-
-#include <plat/dma.h>
-
-#endif	/* __S3C_DMA_PL330_H_ */
diff --git a/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h b/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h
index bf5e2a9d408..64fdf66ff9c 100644
--- a/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h
+++ b/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h
@@ -12,7 +12,7 @@
 #ifndef __S3C_PL330_PDATA_H
 #define __S3C_PL330_PDATA_H
 
-#include <plat/s3c-dma-pl330.h>
+#include <plat/dma-pl330.h>
 
 /*
  * Every PL330 DMAC has max 32 peripheral interfaces,
-- 
cgit v1.2.3-18-g5258


From c4e1662550a3bd23df7cff4611eff67ba2afe078 Mon Sep 17 00:00:00 2001
From: Boojin Kim <boojin.kim@samsung.com>
Date: Fri, 2 Sep 2011 09:44:35 +0900
Subject: ARM: SAMSUNG: Add common DMA operations

This patch adds common DMA operations which are used for Samsung DMA
drivers. Currently there are two types of DMA driver for Samsung SoCs.
The one is S3C-DMA for S3C SoCs and the other is PL330-DMA for S5P SoCs.
This patch provides funcion pointers for common DMA operations to DMA
client driver like SPI and Audio. It makes DMA client drivers support
multi-platform.
In addition, this common DMA operations implement the shared actions
that are needed for DMA client driver. For example shared actions are
filter() function for dma_request_channel() and parameter passing for
device_prep_slave_sg().

Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 arch/arm/mach-s3c2410/include/mach/dma.h       |   8 +-
 arch/arm/mach-s3c64xx/include/mach/dma.h       |   4 +
 arch/arm/plat-samsung/Makefile                 |   6 +-
 arch/arm/plat-samsung/dma-ops.c                | 131 ++++++++++++++++++++++++
 arch/arm/plat-samsung/include/plat/dma-ops.h   |  63 ++++++++++++
 arch/arm/plat-samsung/include/plat/dma-pl330.h |   4 +
 arch/arm/plat-samsung/include/plat/dma.h       |   1 +
 arch/arm/plat-samsung/s3c-dma-ops.c            | 133 +++++++++++++++++++++++++
 8 files changed, 347 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/plat-samsung/dma-ops.c
 create mode 100644 arch/arm/plat-samsung/include/plat/dma-ops.h
 create mode 100644 arch/arm/plat-samsung/s3c-dma-ops.c

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
index b2b2a5bb275..e61a91f88c5 100644
--- a/arch/arm/mach-s3c2410/include/mach/dma.h
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -13,7 +13,6 @@
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H __FILE__
 
-#include <plat/dma.h>
 #include <linux/sysdev.h>
 
 #define MAX_DMA_TRANSFER_SIZE   0x100000 /* Data Unit is half word  */
@@ -51,6 +50,13 @@ enum dma_ch {
 	DMACH_MAX,		/* the end entry */
 };
 
+static inline bool samsung_dma_is_dmadev(void)
+{
+	return false;
+}
+
+#include <plat/dma.h>
+
 #define DMACH_LOW_LEVEL	(1<<28)	/* use this to specifiy hardware ch no */
 
 /* we have 4 dma channels */
diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h
index 0a5d9268a23..49c3a53135d 100644
--- a/arch/arm/mach-s3c64xx/include/mach/dma.h
+++ b/arch/arm/mach-s3c64xx/include/mach/dma.h
@@ -63,6 +63,10 @@ static __inline__ bool s3c_dma_has_circular(void)
 	return true;
 }
 
+static inline bool samsung_dma_is_dmadev(void)
+{
+	return false;
+}
 #define S3C2410_DMAF_CIRCULAR		(1 << 0)
 
 #include <plat/dma.h>
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 853764ba8cc..e2ee0b8a376 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -63,9 +63,11 @@ obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT)	+= dev-backlight.o
 
 # DMA support
 
-obj-$(CONFIG_S3C_DMA)		+= dma.o
+obj-$(CONFIG_S3C_DMA)		+= dma.o s3c-dma-ops.o
 
-obj-$(CONFIG_S3C_PL330_DMA)	+= s3c-pl330.o
+obj-$(CONFIG_SAMSUNG_DMADEV)	+= dma-ops.o
+
+obj-$(CONFIG_S3C_PL330_DMA)	+= s3c-pl330.o s3c-dma-ops.o
 
 # PM support
 
diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c
new file mode 100644
index 00000000000..6e3d9abc9e2
--- /dev/null
+++ b/arch/arm/plat-samsung/dma-ops.c
@@ -0,0 +1,131 @@
+/* linux/arch/arm/plat-samsung/dma-ops.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung DMA Operations
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/amba/pl330.h>
+#include <linux/scatterlist.h>
+
+#include <mach/dma.h>
+
+static inline bool pl330_filter(struct dma_chan *chan, void *param)
+{
+	struct dma_pl330_peri *peri = chan->private;
+	return peri->peri_id == (unsigned)param;
+}
+
+static unsigned samsung_dmadev_request(enum dma_ch dma_ch,
+				struct samsung_dma_info *info)
+{
+	struct dma_chan *chan;
+	dma_cap_mask_t mask;
+	struct dma_slave_config slave_config;
+
+	dma_cap_zero(mask);
+	dma_cap_set(info->cap, mask);
+
+	chan = dma_request_channel(mask, pl330_filter, (void *)dma_ch);
+
+	if (info->direction == DMA_FROM_DEVICE) {
+		memset(&slave_config, 0, sizeof(struct dma_slave_config));
+		slave_config.direction = info->direction;
+		slave_config.src_addr = info->fifo;
+		slave_config.src_addr_width = info->width;
+		slave_config.src_maxburst = 1;
+		dmaengine_slave_config(chan, &slave_config);
+	} else if (info->direction == DMA_TO_DEVICE) {
+		memset(&slave_config, 0, sizeof(struct dma_slave_config));
+		slave_config.direction = info->direction;
+		slave_config.dst_addr = info->fifo;
+		slave_config.dst_addr_width = info->width;
+		slave_config.dst_maxburst = 1;
+		dmaengine_slave_config(chan, &slave_config);
+	}
+
+	return (unsigned)chan;
+}
+
+static int samsung_dmadev_release(unsigned ch,
+			struct s3c2410_dma_client *client)
+{
+	dma_release_channel((struct dma_chan *)ch);
+
+	return 0;
+}
+
+static int samsung_dmadev_prepare(unsigned ch,
+			struct samsung_dma_prep_info *info)
+{
+	struct scatterlist sg;
+	struct dma_chan *chan = (struct dma_chan *)ch;
+	struct dma_async_tx_descriptor *desc;
+
+	switch (info->cap) {
+	case DMA_SLAVE:
+		sg_init_table(&sg, 1);
+		sg_dma_len(&sg) = info->len;
+		sg_set_page(&sg, pfn_to_page(PFN_DOWN(info->buf)),
+			    info->len, offset_in_page(info->buf));
+		sg_dma_address(&sg) = info->buf;
+
+		desc = chan->device->device_prep_slave_sg(chan,
+			&sg, 1, info->direction, DMA_PREP_INTERRUPT);
+		break;
+	case DMA_CYCLIC:
+		desc = chan->device->device_prep_dma_cyclic(chan,
+			info->buf, info->len, info->period, info->direction);
+		break;
+	default:
+		dev_err(&chan->dev->device, "unsupported format\n");
+		return -EFAULT;
+	}
+
+	if (!desc) {
+		dev_err(&chan->dev->device, "cannot prepare cyclic dma\n");
+		return -EFAULT;
+	}
+
+	desc->callback = info->fp;
+	desc->callback_param = info->fp_param;
+
+	dmaengine_submit((struct dma_async_tx_descriptor *)desc);
+
+	return 0;
+}
+
+static inline int samsung_dmadev_trigger(unsigned ch)
+{
+	dma_async_issue_pending((struct dma_chan *)ch);
+
+	return 0;
+}
+
+static inline int samsung_dmadev_flush(unsigned ch)
+{
+	return dmaengine_terminate_all((struct dma_chan *)ch);
+}
+
+struct samsung_dma_ops dmadev_ops = {
+	.request	= samsung_dmadev_request,
+	.release	= samsung_dmadev_release,
+	.prepare	= samsung_dmadev_prepare,
+	.trigger	= samsung_dmadev_trigger,
+	.started	= NULL,
+	.flush		= samsung_dmadev_flush,
+	.stop		= samsung_dmadev_flush,
+};
+
+void *samsung_dmadev_get_ops(void)
+{
+	return &dmadev_ops;
+}
+EXPORT_SYMBOL(samsung_dmadev_get_ops);
diff --git a/arch/arm/plat-samsung/include/plat/dma-ops.h b/arch/arm/plat-samsung/include/plat/dma-ops.h
new file mode 100644
index 00000000000..4c1a363526c
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/dma-ops.h
@@ -0,0 +1,63 @@
+/* arch/arm/plat-samsung/include/plat/dma-ops.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung DMA support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SAMSUNG_DMA_OPS_H_
+#define __SAMSUNG_DMA_OPS_H_ __FILE__
+
+#include <linux/dmaengine.h>
+
+struct samsung_dma_prep_info {
+	enum dma_transaction_type cap;
+	enum dma_data_direction direction;
+	dma_addr_t buf;
+	unsigned long period;
+	unsigned long len;
+	void (*fp)(void *data);
+	void *fp_param;
+};
+
+struct samsung_dma_info {
+	enum dma_transaction_type cap;
+	enum dma_data_direction direction;
+	enum dma_slave_buswidth width;
+	dma_addr_t fifo;
+	struct s3c2410_dma_client *client;
+};
+
+struct samsung_dma_ops {
+	unsigned (*request)(enum dma_ch ch, struct samsung_dma_info *info);
+	int (*release)(unsigned ch, struct s3c2410_dma_client *client);
+	int (*prepare)(unsigned ch, struct samsung_dma_prep_info *info);
+	int (*trigger)(unsigned ch);
+	int (*started)(unsigned ch);
+	int (*flush)(unsigned ch);
+	int (*stop)(unsigned ch);
+};
+
+extern void *samsung_dmadev_get_ops(void);
+extern void *s3c_dma_get_ops(void);
+
+static inline void *__samsung_dma_get_ops(void)
+{
+	if (samsung_dma_is_dmadev())
+		return samsung_dmadev_get_ops();
+	else
+		return s3c_dma_get_ops();
+}
+
+/*
+ * samsung_dma_get_ops
+ * get the set of samsung dma operations
+ */
+#define samsung_dma_get_ops() __samsung_dma_get_ops()
+
+#endif /* __SAMSUNG_DMA_OPS_H_ */
diff --git a/arch/arm/plat-samsung/include/plat/dma-pl330.h b/arch/arm/plat-samsung/include/plat/dma-pl330.h
index 0a5dade0e85..2916920034f 100644
--- a/arch/arm/plat-samsung/include/plat/dma-pl330.h
+++ b/arch/arm/plat-samsung/include/plat/dma-pl330.h
@@ -93,6 +93,10 @@ static inline bool s3c_dma_has_circular(void)
 	return true;
 }
 
+static inline bool samsung_dma_is_dmadev(void)
+{
+	return true;
+}
 #include <plat/dma.h>
 
 #endif	/* __DMA_PL330_H_ */
diff --git a/arch/arm/plat-samsung/include/plat/dma.h b/arch/arm/plat-samsung/include/plat/dma.h
index 8c273b7a6f5..36107606074 100644
--- a/arch/arm/plat-samsung/include/plat/dma.h
+++ b/arch/arm/plat-samsung/include/plat/dma.h
@@ -126,3 +126,4 @@ extern int s3c2410_dma_set_opfn(enum dma_ch, s3c2410_dma_opfn_t rtn);
 extern int s3c2410_dma_set_buffdone_fn(enum dma_ch, s3c2410_dma_cbfn_t rtn);
 
 
+#include <plat/dma-ops.h>
diff --git a/arch/arm/plat-samsung/s3c-dma-ops.c b/arch/arm/plat-samsung/s3c-dma-ops.c
new file mode 100644
index 00000000000..33ab3241268
--- /dev/null
+++ b/arch/arm/plat-samsung/s3c-dma-ops.c
@@ -0,0 +1,133 @@
+/* linux/arch/arm/plat-samsung/s3c-dma-ops.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung S3C-DMA Operations
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#include <mach/dma.h>
+
+struct cb_data {
+	void (*fp) (void *);
+	void *fp_param;
+	unsigned ch;
+	struct list_head node;
+};
+
+static LIST_HEAD(dma_list);
+
+static void s3c_dma_cb(struct s3c2410_dma_chan *channel, void *param,
+		       int size, enum s3c2410_dma_buffresult res)
+{
+	struct cb_data *data = param;
+
+	data->fp(data->fp_param);
+}
+
+static unsigned s3c_dma_request(enum dma_ch dma_ch,
+				 struct samsung_dma_info *info)
+{
+	struct cb_data *data;
+
+	if (s3c2410_dma_request(dma_ch, info->client, NULL) < 0) {
+		s3c2410_dma_free(dma_ch, info->client);
+		return 0;
+	}
+
+	data = kzalloc(sizeof(struct cb_data), GFP_KERNEL);
+	data->ch = dma_ch;
+	list_add_tail(&data->node, &dma_list);
+
+	if (info->direction == DMA_FROM_DEVICE)
+		s3c2410_dma_devconfig(dma_ch, S3C2410_DMASRC_HW, info->fifo);
+	else
+		s3c2410_dma_devconfig(dma_ch, S3C2410_DMASRC_MEM, info->fifo);
+
+	if (info->cap == DMA_CYCLIC)
+		s3c2410_dma_setflags(dma_ch, S3C2410_DMAF_CIRCULAR);
+
+	s3c2410_dma_config(dma_ch, info->width);
+
+	return (unsigned)dma_ch;
+}
+
+static int s3c_dma_release(unsigned ch, struct s3c2410_dma_client *client)
+{
+	struct cb_data *data;
+
+	list_for_each_entry(data, &dma_list, node)
+		if (data->ch == ch)
+			break;
+	list_del(&data->node);
+
+	s3c2410_dma_free(ch, client);
+	kfree(data);
+
+	return 0;
+}
+
+static int s3c_dma_prepare(unsigned ch, struct samsung_dma_prep_info *info)
+{
+	struct cb_data *data;
+	int len = (info->cap == DMA_CYCLIC) ? info->period : info->len;
+
+	list_for_each_entry(data, &dma_list, node)
+		if (data->ch == ch)
+			break;
+
+	if (!data->fp) {
+		s3c2410_dma_set_buffdone_fn(ch, s3c_dma_cb);
+		data->fp = info->fp;
+		data->fp_param = info->fp_param;
+	}
+
+	s3c2410_dma_enqueue(ch, (void *)data, info->buf, len);
+
+	return 0;
+}
+
+static inline int s3c_dma_trigger(unsigned ch)
+{
+	return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_START);
+}
+
+static inline int s3c_dma_started(unsigned ch)
+{
+	return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_STARTED);
+}
+
+static inline int s3c_dma_flush(unsigned ch)
+{
+	return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_FLUSH);
+}
+
+static inline int s3c_dma_stop(unsigned ch)
+{
+	return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_STOP);
+}
+
+static struct samsung_dma_ops s3c_dma_ops = {
+	.request	= s3c_dma_request,
+	.release	= s3c_dma_release,
+	.prepare	= s3c_dma_prepare,
+	.trigger	= s3c_dma_trigger,
+	.started	= s3c_dma_started,
+	.flush		= s3c_dma_flush,
+	.stop		= s3c_dma_stop,
+};
+
+void *s3c_dma_get_ops(void)
+{
+	return &s3c_dma_ops;
+}
+EXPORT_SYMBOL(s3c_dma_get_ops);
-- 
cgit v1.2.3-18-g5258


From bf856fbb5e104ab9afd366baa0d744dd8cfa074d Mon Sep 17 00:00:00 2001
From: Boojin Kim <boojin.kim@samsung.com>
Date: Fri, 2 Sep 2011 09:44:36 +0900
Subject: ARM: EXYNOS4: Use generic DMA PL330 driver

This patch makes Samsung EXYNOS4 to use DMA PL330 driver
on DMADEVICE. The EXYNOS4 uses DMA generic APIs instead of
SAMSUNG specific S3C-PL330 APIs.

Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 arch/arm/mach-exynos4/Kconfig |   2 +-
 arch/arm/mach-exynos4/clock.c |  11 +-
 arch/arm/mach-exynos4/dma.c   | 299 ++++++++++++++++++++++++++----------------
 3 files changed, 198 insertions(+), 114 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index 0c77ab99fa1..9f00cf3450d 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -11,7 +11,7 @@ if ARCH_EXYNOS4
 
 config CPU_EXYNOS4210
 	bool
-	select S3C_PL330_DMA
+	select SAMSUNG_DMADEV
 	help
 	  Enable EXYNOS4210 CPU support
 
diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos4/clock.c
index 851dea01857..fee2dd8791d 100644
--- a/arch/arm/mach-exynos4/clock.c
+++ b/arch/arm/mach-exynos4/clock.c
@@ -43,6 +43,11 @@ static struct clk clk_sclk_usbphy1 = {
 	.name		= "sclk_usbphy1",
 };
 
+static struct clk dummy_apb_pclk = {
+	.name		= "apb_pclk",
+	.id		= -1,
+};
+
 static int exynos4_clksrc_mask_top_ctrl(struct clk *clk, int enable)
 {
 	return s5p_gatectrl(S5P_CLKSRC_MASK_TOP, clk, enable);
@@ -454,12 +459,12 @@ static struct clk init_clocks_off[] = {
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 10),
 	}, {
-		.name		= "pdma",
+		.name		= "dma",
 		.devname	= "s3c-pl330.0",
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 0),
 	}, {
-		.name		= "pdma",
+		.name		= "dma",
 		.devname	= "s3c-pl330.1",
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 1),
@@ -1210,5 +1215,7 @@ void __init exynos4_register_clocks(void)
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
+	s3c24xx_register_clock(&dummy_apb_pclk);
+
 	s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-exynos4/dma.c b/arch/arm/mach-exynos4/dma.c
index 564bb530f33..d57d6625502 100644
--- a/arch/arm/mach-exynos4/dma.c
+++ b/arch/arm/mach-exynos4/dma.c
@@ -21,151 +21,228 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl330.h>
 
+#include <asm/irq.h>
 #include <plat/devs.h>
 #include <plat/irqs.h>
 
 #include <mach/map.h>
 #include <mach/irqs.h>
-
-#include <plat/s3c-pl330-pdata.h>
+#include <mach/dma.h>
 
 static u64 dma_dmamask = DMA_BIT_MASK(32);
 
-static struct resource exynos4_pdma0_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_PDMA0,
-		.end	= EXYNOS4_PA_PDMA0 + SZ_4K,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_PDMA0,
-		.end	= IRQ_PDMA0,
-		.flags	= IORESOURCE_IRQ,
+struct dma_pl330_peri pdma0_peri[28] = {
+	{
+		.peri_id = (u8)DMACH_PCM0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ0,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ2,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0S_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART4_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART4_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS4_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS4_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_AC97_MICIN,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_AC97_PCMIN,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_AC97_PCMOUT,
+		.rqtype = MEMTODEV,
 	},
 };
 
-static struct s3c_pl330_platdata exynos4_pdma0_pdata = {
-	.peri = {
-		[0] = DMACH_PCM0_RX,
-		[1] = DMACH_PCM0_TX,
-		[2] = DMACH_PCM2_RX,
-		[3] = DMACH_PCM2_TX,
-		[4] = DMACH_MSM_REQ0,
-		[5] = DMACH_MSM_REQ2,
-		[6] = DMACH_SPI0_RX,
-		[7] = DMACH_SPI0_TX,
-		[8] = DMACH_SPI2_RX,
-		[9] = DMACH_SPI2_TX,
-		[10] = DMACH_I2S0S_TX,
-		[11] = DMACH_I2S0_RX,
-		[12] = DMACH_I2S0_TX,
-		[13] = DMACH_I2S2_RX,
-		[14] = DMACH_I2S2_TX,
-		[15] = DMACH_UART0_RX,
-		[16] = DMACH_UART0_TX,
-		[17] = DMACH_UART2_RX,
-		[18] = DMACH_UART2_TX,
-		[19] = DMACH_UART4_RX,
-		[20] = DMACH_UART4_TX,
-		[21] = DMACH_SLIMBUS0_RX,
-		[22] = DMACH_SLIMBUS0_TX,
-		[23] = DMACH_SLIMBUS2_RX,
-		[24] = DMACH_SLIMBUS2_TX,
-		[25] = DMACH_SLIMBUS4_RX,
-		[26] = DMACH_SLIMBUS4_TX,
-		[27] = DMACH_AC97_MICIN,
-		[28] = DMACH_AC97_PCMIN,
-		[29] = DMACH_AC97_PCMOUT,
-		[30] = DMACH_MAX,
-		[31] = DMACH_MAX,
-	},
+struct dma_pl330_platdata exynos4_pdma0_pdata = {
+	.nr_valid_peri = ARRAY_SIZE(pdma0_peri),
+	.peri = pdma0_peri,
 };
 
-static struct platform_device exynos4_device_pdma0 = {
-	.name		= "s3c-pl330",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(exynos4_pdma0_resource),
-	.resource	= exynos4_pdma0_resource,
-	.dev		= {
+struct amba_device exynos4_device_pdma0 = {
+	.dev = {
+		.init_name = "dma-pl330.0",
 		.dma_mask = &dma_dmamask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = &exynos4_pdma0_pdata,
 	},
+	.res = {
+		.start = EXYNOS4_PA_PDMA0,
+		.end = EXYNOS4_PA_PDMA0 + SZ_4K,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_PDMA0, NO_IRQ},
+	.periphid = 0x00041330,
 };
 
-static struct resource exynos4_pdma1_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_PDMA1,
-		.end	= EXYNOS4_PA_PDMA1 + SZ_4K,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_PDMA1,
-		.end	= IRQ_PDMA1,
-		.flags	= IORESOURCE_IRQ,
+struct dma_pl330_peri pdma1_peri[25] = {
+	{
+		.peri_id = (u8)DMACH_PCM0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ1,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ3,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0S_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART3_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART3_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS3_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS3_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS5_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS5_TX,
+		.rqtype = MEMTODEV,
 	},
 };
 
-static struct s3c_pl330_platdata exynos4_pdma1_pdata = {
-	.peri = {
-		[0] = DMACH_PCM0_RX,
-		[1] = DMACH_PCM0_TX,
-		[2] = DMACH_PCM1_RX,
-		[3] = DMACH_PCM1_TX,
-		[4] = DMACH_MSM_REQ1,
-		[5] = DMACH_MSM_REQ3,
-		[6] = DMACH_SPI1_RX,
-		[7] = DMACH_SPI1_TX,
-		[8] = DMACH_I2S0S_TX,
-		[9] = DMACH_I2S0_RX,
-		[10] = DMACH_I2S0_TX,
-		[11] = DMACH_I2S1_RX,
-		[12] = DMACH_I2S1_TX,
-		[13] = DMACH_UART0_RX,
-		[14] = DMACH_UART0_TX,
-		[15] = DMACH_UART1_RX,
-		[16] = DMACH_UART1_TX,
-		[17] = DMACH_UART3_RX,
-		[18] = DMACH_UART3_TX,
-		[19] = DMACH_SLIMBUS1_RX,
-		[20] = DMACH_SLIMBUS1_TX,
-		[21] = DMACH_SLIMBUS3_RX,
-		[22] = DMACH_SLIMBUS3_TX,
-		[23] = DMACH_SLIMBUS5_RX,
-		[24] = DMACH_SLIMBUS5_TX,
-		[25] = DMACH_SLIMBUS0AUX_RX,
-		[26] = DMACH_SLIMBUS0AUX_TX,
-		[27] = DMACH_SPDIF,
-		[28] = DMACH_MAX,
-		[29] = DMACH_MAX,
-		[30] = DMACH_MAX,
-		[31] = DMACH_MAX,
-	},
+struct dma_pl330_platdata exynos4_pdma1_pdata = {
+	.nr_valid_peri = ARRAY_SIZE(pdma1_peri),
+	.peri = pdma1_peri,
 };
 
-static struct platform_device exynos4_device_pdma1 = {
-	.name		= "s3c-pl330",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(exynos4_pdma1_resource),
-	.resource	= exynos4_pdma1_resource,
-	.dev		= {
+struct amba_device exynos4_device_pdma1 = {
+	.dev = {
+		.init_name = "dma-pl330.1",
 		.dma_mask = &dma_dmamask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = &exynos4_pdma1_pdata,
 	},
-};
-
-static struct platform_device *exynos4_dmacs[] __initdata = {
-	&exynos4_device_pdma0,
-	&exynos4_device_pdma1,
+	.res = {
+		.start = EXYNOS4_PA_PDMA1,
+		.end = EXYNOS4_PA_PDMA1 + SZ_4K,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_PDMA1, NO_IRQ},
+	.periphid = 0x00041330,
 };
 
 static int __init exynos4_dma_init(void)
 {
-	platform_add_devices(exynos4_dmacs, ARRAY_SIZE(exynos4_dmacs));
+	amba_device_register(&exynos4_device_pdma0, &iomem_resource);
 
 	return 0;
 }
-- 
cgit v1.2.3-18-g5258


From dafc954304ad3a471c82e7aad15b26f6be264560 Mon Sep 17 00:00:00 2001
From: Boojin Kim <boojin.kim@samsung.com>
Date: Fri, 2 Sep 2011 09:44:37 +0900
Subject: ARM: S5PV210: Use generic DMA PL330 driver

This patch makes Samsung S5PV210 to use DMA PL330 driver
on DMADEVICE. The S5PV210 uses DMA generic APIs instead of
SAMSUNG specific S3C-PL330 APIs.

Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 arch/arm/mach-s5pv210/Kconfig            |   2 +-
 arch/arm/mach-s5pv210/clock.c            |  10 +-
 arch/arm/mach-s5pv210/dma.c              | 316 ++++++++++++++++++++-----------
 arch/arm/mach-s5pv210/include/mach/dma.h |   2 +-
 4 files changed, 214 insertions(+), 116 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 69dd87cd8e2..d960090e465 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -11,7 +11,7 @@ if ARCH_S5PV210
 
 config CPU_S5PV210
 	bool
-	select S3C_PL330_DMA
+	select SAMSUNG_DMADEV
 	select S5P_EXT_INT
 	select S5P_HRT
 	select S5PV210_PM if PM
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index 52a8e607bcc..d35726a6fae 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -203,6 +203,11 @@ static struct clk clk_pcmcdclk2 = {
 	.name		= "pcmcdclk",
 };
 
+static struct clk dummy_apb_pclk = {
+	.name		= "apb_pclk",
+	.id		= -1,
+};
+
 static struct clk *clkset_vpllsrc_list[] = {
 	[0] = &clk_fin_vpll,
 	[1] = &clk_sclk_hdmi27m,
@@ -289,13 +294,13 @@ static struct clk_ops clk_fout_apll_ops = {
 
 static struct clk init_clocks_off[] = {
 	{
-		.name		= "pdma",
+		.name		= "dma",
 		.devname	= "s3c-pl330.0",
 		.parent		= &clk_hclk_psys.clk,
 		.enable		= s5pv210_clk_ip0_ctrl,
 		.ctrlbit	= (1 << 3),
 	}, {
-		.name		= "pdma",
+		.name		= "dma",
 		.devname	= "s3c-pl330.1",
 		.parent		= &clk_hclk_psys.clk,
 		.enable		= s5pv210_clk_ip0_ctrl,
@@ -1161,5 +1166,6 @@ void __init s5pv210_register_clocks(void)
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
+	s3c24xx_register_clock(&dummy_apb_pclk);
 	s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c
index 497d3439a14..f79d0b06cbf 100644
--- a/arch/arm/mach-s5pv210/dma.c
+++ b/arch/arm/mach-s5pv210/dma.c
@@ -1,4 +1,8 @@
-/*
+/* linux/arch/arm/mach-s5pv210/dma.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
  * Copyright (C) 2010 Samsung Electronics Co. Ltd.
  *	Jaswinder Singh <jassi.brar@samsung.com>
  *
@@ -17,151 +21,239 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl330.h>
 
+#include <asm/irq.h>
 #include <plat/devs.h>
 #include <plat/irqs.h>
 
 #include <mach/map.h>
 #include <mach/irqs.h>
-
-#include <plat/s3c-pl330-pdata.h>
+#include <mach/dma.h>
 
 static u64 dma_dmamask = DMA_BIT_MASK(32);
 
-static struct resource s5pv210_pdma0_resource[] = {
-	[0] = {
-		.start  = S5PV210_PA_PDMA0,
-		.end    = S5PV210_PA_PDMA0 + SZ_4K,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_PDMA0,
-		.end	= IRQ_PDMA0,
-		.flags	= IORESOURCE_IRQ,
+struct dma_pl330_peri pdma0_peri[28] = {
+	{
+		.peri_id = (u8)DMACH_UART0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART3_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART3_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0S_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_AC97_MICIN,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_AC97_PCMIN,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_AC97_PCMOUT,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_PWM,
+	}, {
+		.peri_id = (u8)DMACH_SPDIF,
+		.rqtype = MEMTODEV,
 	},
 };
 
-static struct s3c_pl330_platdata s5pv210_pdma0_pdata = {
-	.peri = {
-		[0] = DMACH_UART0_RX,
-		[1] = DMACH_UART0_TX,
-		[2] = DMACH_UART1_RX,
-		[3] = DMACH_UART1_TX,
-		[4] = DMACH_UART2_RX,
-		[5] = DMACH_UART2_TX,
-		[6] = DMACH_UART3_RX,
-		[7] = DMACH_UART3_TX,
-		[8] = DMACH_MAX,
-		[9] = DMACH_I2S0_RX,
-		[10] = DMACH_I2S0_TX,
-		[11] = DMACH_I2S0S_TX,
-		[12] = DMACH_I2S1_RX,
-		[13] = DMACH_I2S1_TX,
-		[14] = DMACH_MAX,
-		[15] = DMACH_MAX,
-		[16] = DMACH_SPI0_RX,
-		[17] = DMACH_SPI0_TX,
-		[18] = DMACH_SPI1_RX,
-		[19] = DMACH_SPI1_TX,
-		[20] = DMACH_MAX,
-		[21] = DMACH_MAX,
-		[22] = DMACH_AC97_MICIN,
-		[23] = DMACH_AC97_PCMIN,
-		[24] = DMACH_AC97_PCMOUT,
-		[25] = DMACH_MAX,
-		[26] = DMACH_PWM,
-		[27] = DMACH_SPDIF,
-		[28] = DMACH_MAX,
-		[29] = DMACH_MAX,
-		[30] = DMACH_MAX,
-		[31] = DMACH_MAX,
-	},
+struct dma_pl330_platdata s5pv210_pdma0_pdata = {
+	.nr_valid_peri = ARRAY_SIZE(pdma0_peri),
+	.peri = pdma0_peri,
 };
 
-static struct platform_device s5pv210_device_pdma0 = {
-	.name		= "s3c-pl330",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s5pv210_pdma0_resource),
-	.resource	= s5pv210_pdma0_resource,
-	.dev		= {
+struct amba_device s5pv210_device_pdma0 = {
+	.dev = {
+		.init_name = "dma-pl330.0",
 		.dma_mask = &dma_dmamask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = &s5pv210_pdma0_pdata,
 	},
-};
-
-static struct resource s5pv210_pdma1_resource[] = {
-	[0] = {
-		.start  = S5PV210_PA_PDMA1,
-		.end    = S5PV210_PA_PDMA1 + SZ_4K,
+	.res = {
+		.start = S5PV210_PA_PDMA0,
+		.end = S5PV210_PA_PDMA0 + SZ_4K,
 		.flags = IORESOURCE_MEM,
 	},
-	[1] = {
-		.start	= IRQ_PDMA1,
-		.end	= IRQ_PDMA1,
-		.flags	= IORESOURCE_IRQ,
-	},
+	.irq = {IRQ_PDMA0, NO_IRQ},
+	.periphid = 0x00041330,
 };
 
-static struct s3c_pl330_platdata s5pv210_pdma1_pdata = {
-	.peri = {
-		[0] = DMACH_UART0_RX,
-		[1] = DMACH_UART0_TX,
-		[2] = DMACH_UART1_RX,
-		[3] = DMACH_UART1_TX,
-		[4] = DMACH_UART2_RX,
-		[5] = DMACH_UART2_TX,
-		[6] = DMACH_UART3_RX,
-		[7] = DMACH_UART3_TX,
-		[8] = DMACH_MAX,
-		[9] = DMACH_I2S0_RX,
-		[10] = DMACH_I2S0_TX,
-		[11] = DMACH_I2S0S_TX,
-		[12] = DMACH_I2S1_RX,
-		[13] = DMACH_I2S1_TX,
-		[14] = DMACH_I2S2_RX,
-		[15] = DMACH_I2S2_TX,
-		[16] = DMACH_SPI0_RX,
-		[17] = DMACH_SPI0_TX,
-		[18] = DMACH_SPI1_RX,
-		[19] = DMACH_SPI1_TX,
-		[20] = DMACH_MAX,
-		[21] = DMACH_MAX,
-		[22] = DMACH_PCM0_RX,
-		[23] = DMACH_PCM0_TX,
-		[24] = DMACH_PCM1_RX,
-		[25] = DMACH_PCM1_TX,
-		[26] = DMACH_MSM_REQ0,
-		[27] = DMACH_MSM_REQ1,
-		[28] = DMACH_MSM_REQ2,
-		[29] = DMACH_MSM_REQ3,
-		[30] = DMACH_PCM2_RX,
-		[31] = DMACH_PCM2_TX,
+struct dma_pl330_peri pdma1_peri[32] = {
+	{
+		.peri_id = (u8)DMACH_UART0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART3_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART3_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0S_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_PCM0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ0,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ1,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ2,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ3,
+	}, {
+		.peri_id = (u8)DMACH_PCM2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM2_TX,
+		.rqtype = MEMTODEV,
 	},
 };
 
-static struct platform_device s5pv210_device_pdma1 = {
-	.name		= "s3c-pl330",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(s5pv210_pdma1_resource),
-	.resource	= s5pv210_pdma1_resource,
-	.dev		= {
+struct dma_pl330_platdata s5pv210_pdma1_pdata = {
+	.nr_valid_peri = ARRAY_SIZE(pdma1_peri),
+	.peri = pdma1_peri,
+};
+
+struct amba_device s5pv210_device_pdma1 = {
+	.dev = {
+		.init_name = "dma-pl330.1",
 		.dma_mask = &dma_dmamask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = &s5pv210_pdma1_pdata,
 	},
-};
-
-static struct platform_device *s5pv210_dmacs[] __initdata = {
-	&s5pv210_device_pdma0,
-	&s5pv210_device_pdma1,
+	.res = {
+		.start = S5PV210_PA_PDMA1,
+		.end = S5PV210_PA_PDMA1 + SZ_4K,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_PDMA1, NO_IRQ},
+	.periphid = 0x00041330,
 };
 
 static int __init s5pv210_dma_init(void)
 {
-	platform_add_devices(s5pv210_dmacs, ARRAY_SIZE(s5pv210_dmacs));
+	amba_device_register(&s5pv210_device_pdma0, &iomem_resource);
 
 	return 0;
 }
diff --git a/arch/arm/mach-s5pv210/include/mach/dma.h b/arch/arm/mach-s5pv210/include/mach/dma.h
index 1beae2cca6a..201842a3769 100644
--- a/arch/arm/mach-s5pv210/include/mach/dma.h
+++ b/arch/arm/mach-s5pv210/include/mach/dma.h
@@ -20,7 +20,7 @@
 #ifndef __MACH_DMA_H
 #define __MACH_DMA_H
 
-/* This platform uses the common S3C DMA API driver for PL330 */
+/* This platform uses the common DMA API driver for PL330 */
 #include <plat/dma-pl330.h>
 
 #endif /* __MACH_DMA_H */
-- 
cgit v1.2.3-18-g5258


From a422bd0f6d50bcb9c529d890bde70295915bb3e9 Mon Sep 17 00:00:00 2001
From: Boojin Kim <boojin.kim@samsung.com>
Date: Fri, 2 Sep 2011 09:44:38 +0900
Subject: ARM: S5PC100: Use generic DMA PL330 driver

This patch makes Samsung S5PC100 to use DMA PL330 driver
on DMADEVICE. The S5PC100 uses DMA generic APIs instead of
SAMSUNG specific S3C-PL330 APIs.

Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 arch/arm/mach-s5pc100/Kconfig            |   2 +-
 arch/arm/mach-s5pc100/clock.c            |  11 +-
 arch/arm/mach-s5pc100/dma.c              | 323 ++++++++++++++++++++-----------
 arch/arm/mach-s5pc100/include/mach/dma.h |   2 +-
 4 files changed, 222 insertions(+), 116 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
index e8a33c4b054..e538a4c67e9 100644
--- a/arch/arm/mach-s5pc100/Kconfig
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -10,7 +10,7 @@ if ARCH_S5PC100
 config CPU_S5PC100
 	bool
 	select S5P_EXT_INT
-	select S3C_PL330_DMA
+	select SAMSUNG_DMADEV
 	help
 	  Enable S5PC100 CPU support
 
diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c
index ff5cbb30de5..6527c05c5fa 100644
--- a/arch/arm/mach-s5pc100/clock.c
+++ b/arch/arm/mach-s5pc100/clock.c
@@ -33,6 +33,11 @@ static struct clk s5p_clk_otgphy = {
 	.name		= "otg_phy",
 };
 
+static struct clk dummy_apb_pclk = {
+	.name		= "apb_pclk",
+	.id		= -1,
+};
+
 static struct clk *clk_src_mout_href_list[] = {
 	[0] = &s5p_clk_27m,
 	[1] = &clk_fin_hpll,
@@ -454,13 +459,13 @@ static struct clk init_clocks_off[] = {
 		.enable		= s5pc100_d1_0_ctrl,
 		.ctrlbit	= (1 << 2),
 	}, {
-		.name		= "pdma",
+		.name		= "dma",
 		.devname	= "s3c-pl330.1",
 		.parent		= &clk_div_d1_bus.clk,
 		.enable		= s5pc100_d1_0_ctrl,
 		.ctrlbit	= (1 << 1),
 	}, {
-		.name		= "pdma",
+		.name		= "dma",
 		.devname	= "s3c-pl330.0",
 		.parent		= &clk_div_d1_bus.clk,
 		.enable		= s5pc100_d1_0_ctrl,
@@ -1276,5 +1281,7 @@ void __init s5pc100_register_clocks(void)
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
+	s3c24xx_register_clock(&dummy_apb_pclk);
+
 	s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c
index bf4cd0fb97c..ef803e92d35 100644
--- a/arch/arm/mach-s5pc100/dma.c
+++ b/arch/arm/mach-s5pc100/dma.c
@@ -1,4 +1,8 @@
-/*
+/* linux/arch/arm/mach-s5pc100/dma.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
  * Copyright (C) 2010 Samsung Electronics Co. Ltd.
  *	Jaswinder Singh <jassi.brar@samsung.com>
  *
@@ -17,150 +21,245 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl330.h>
 
+#include <asm/irq.h>
 #include <plat/devs.h>
+#include <plat/irqs.h>
 
 #include <mach/map.h>
 #include <mach/irqs.h>
-
-#include <plat/s3c-pl330-pdata.h>
+#include <mach/dma.h>
 
 static u64 dma_dmamask = DMA_BIT_MASK(32);
 
-static struct resource s5pc100_pdma0_resource[] = {
-	[0] = {
-		.start  = S5PC100_PA_PDMA0,
-		.end    = S5PC100_PA_PDMA0 + SZ_4K,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_PDMA0,
-		.end	= IRQ_PDMA0,
-		.flags	= IORESOURCE_IRQ,
+struct dma_pl330_peri pdma0_peri[30] = {
+	{
+		.peri_id = (u8)DMACH_UART0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART3_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART3_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = DMACH_IRDA,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0S_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_AC97_MICIN,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_AC97_PCMIN,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_AC97_PCMOUT,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_EXTERNAL,
+	}, {
+		.peri_id = (u8)DMACH_PWM,
+	}, {
+		.peri_id = (u8)DMACH_SPDIF,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_HSI_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_HSI_TX,
+		.rqtype = MEMTODEV,
 	},
 };
 
-static struct s3c_pl330_platdata s5pc100_pdma0_pdata = {
-	.peri = {
-		[0] = DMACH_UART0_RX,
-		[1] = DMACH_UART0_TX,
-		[2] = DMACH_UART1_RX,
-		[3] = DMACH_UART1_TX,
-		[4] = DMACH_UART2_RX,
-		[5] = DMACH_UART2_TX,
-		[6] = DMACH_UART3_RX,
-		[7] = DMACH_UART3_TX,
-		[8] = DMACH_IRDA,
-		[9] = DMACH_I2S0_RX,
-		[10] = DMACH_I2S0_TX,
-		[11] = DMACH_I2S0S_TX,
-		[12] = DMACH_I2S1_RX,
-		[13] = DMACH_I2S1_TX,
-		[14] = DMACH_I2S2_RX,
-		[15] = DMACH_I2S2_TX,
-		[16] = DMACH_SPI0_RX,
-		[17] = DMACH_SPI0_TX,
-		[18] = DMACH_SPI1_RX,
-		[19] = DMACH_SPI1_TX,
-		[20] = DMACH_SPI2_RX,
-		[21] = DMACH_SPI2_TX,
-		[22] = DMACH_AC97_MICIN,
-		[23] = DMACH_AC97_PCMIN,
-		[24] = DMACH_AC97_PCMOUT,
-		[25] = DMACH_EXTERNAL,
-		[26] = DMACH_PWM,
-		[27] = DMACH_SPDIF,
-		[28] = DMACH_HSI_RX,
-		[29] = DMACH_HSI_TX,
-		[30] = DMACH_MAX,
-		[31] = DMACH_MAX,
-	},
+struct dma_pl330_platdata s5pc100_pdma0_pdata = {
+	.nr_valid_peri = ARRAY_SIZE(pdma0_peri),
+	.peri = pdma0_peri,
 };
 
-static struct platform_device s5pc100_device_pdma0 = {
-	.name		= "s3c-pl330",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s5pc100_pdma0_resource),
-	.resource	= s5pc100_pdma0_resource,
-	.dev		= {
+struct amba_device s5pc100_device_pdma0 = {
+	.dev = {
+		.init_name = "dma-pl330.0",
 		.dma_mask = &dma_dmamask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = &s5pc100_pdma0_pdata,
 	},
-};
-
-static struct resource s5pc100_pdma1_resource[] = {
-	[0] = {
-		.start  = S5PC100_PA_PDMA1,
-		.end    = S5PC100_PA_PDMA1 + SZ_4K,
+	.res = {
+		.start = S5PC100_PA_PDMA0,
+		.end = S5PC100_PA_PDMA0 + SZ_4K,
 		.flags = IORESOURCE_MEM,
 	},
-	[1] = {
-		.start	= IRQ_PDMA1,
-		.end	= IRQ_PDMA1,
-		.flags	= IORESOURCE_IRQ,
-	},
+	.irq = {IRQ_PDMA0, NO_IRQ},
+	.periphid = 0x00041330,
 };
 
-static struct s3c_pl330_platdata s5pc100_pdma1_pdata = {
-	.peri = {
-		[0] = DMACH_UART0_RX,
-		[1] = DMACH_UART0_TX,
-		[2] = DMACH_UART1_RX,
-		[3] = DMACH_UART1_TX,
-		[4] = DMACH_UART2_RX,
-		[5] = DMACH_UART2_TX,
-		[6] = DMACH_UART3_RX,
-		[7] = DMACH_UART3_TX,
-		[8] = DMACH_IRDA,
-		[9] = DMACH_I2S0_RX,
-		[10] = DMACH_I2S0_TX,
-		[11] = DMACH_I2S0S_TX,
-		[12] = DMACH_I2S1_RX,
-		[13] = DMACH_I2S1_TX,
-		[14] = DMACH_I2S2_RX,
-		[15] = DMACH_I2S2_TX,
-		[16] = DMACH_SPI0_RX,
-		[17] = DMACH_SPI0_TX,
-		[18] = DMACH_SPI1_RX,
-		[19] = DMACH_SPI1_TX,
-		[20] = DMACH_SPI2_RX,
-		[21] = DMACH_SPI2_TX,
-		[22] = DMACH_PCM0_RX,
-		[23] = DMACH_PCM0_TX,
-		[24] = DMACH_PCM1_RX,
-		[25] = DMACH_PCM1_TX,
-		[26] = DMACH_MSM_REQ0,
-		[27] = DMACH_MSM_REQ1,
-		[28] = DMACH_MSM_REQ2,
-		[29] = DMACH_MSM_REQ3,
-		[30] = DMACH_MAX,
-		[31] = DMACH_MAX,
+struct dma_pl330_peri pdma1_peri[30] = {
+	{
+		.peri_id = (u8)DMACH_UART0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART3_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART3_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = DMACH_IRDA,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0S_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ0,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ1,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ2,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ3,
 	},
 };
 
-static struct platform_device s5pc100_device_pdma1 = {
-	.name		= "s3c-pl330",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(s5pc100_pdma1_resource),
-	.resource	= s5pc100_pdma1_resource,
-	.dev		= {
+struct dma_pl330_platdata s5pc100_pdma1_pdata = {
+	.nr_valid_peri = ARRAY_SIZE(pdma1_peri),
+	.peri = pdma1_peri,
+};
+
+struct amba_device s5pc100_device_pdma1 = {
+	.dev = {
+		.init_name = "dma-pl330.1",
 		.dma_mask = &dma_dmamask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = &s5pc100_pdma1_pdata,
 	},
-};
-
-static struct platform_device *s5pc100_dmacs[] __initdata = {
-	&s5pc100_device_pdma0,
-	&s5pc100_device_pdma1,
+	.res = {
+		.start = S5PC100_PA_PDMA1,
+		.end = S5PC100_PA_PDMA1 + SZ_4K,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_PDMA1, NO_IRQ},
+	.periphid = 0x00041330,
 };
 
 static int __init s5pc100_dma_init(void)
 {
-	platform_add_devices(s5pc100_dmacs, ARRAY_SIZE(s5pc100_dmacs));
+	amba_device_register(&s5pc100_device_pdma0, &iomem_resource);
 
 	return 0;
 }
diff --git a/arch/arm/mach-s5pc100/include/mach/dma.h b/arch/arm/mach-s5pc100/include/mach/dma.h
index 1beae2cca6a..201842a3769 100644
--- a/arch/arm/mach-s5pc100/include/mach/dma.h
+++ b/arch/arm/mach-s5pc100/include/mach/dma.h
@@ -20,7 +20,7 @@
 #ifndef __MACH_DMA_H
 #define __MACH_DMA_H
 
-/* This platform uses the common S3C DMA API driver for PL330 */
+/* This platform uses the common DMA API driver for PL330 */
 #include <plat/dma-pl330.h>
 
 #endif /* __MACH_DMA_H */
-- 
cgit v1.2.3-18-g5258


From 3091e61173211de3fbd9bcb99ddc33333377fcb7 Mon Sep 17 00:00:00 2001
From: Boojin Kim <boojin.kim@samsung.com>
Date: Fri, 2 Sep 2011 09:44:39 +0900
Subject: ARM: S5P64X0: Use generic DMA PL330 driver

This patch makes Samsung S5P64X0 to use DMA PL330 driver
on DMADEVICE. The S5P64X0 uses DMA generic APIs instead of
SAMSUNG specific S3C-PL330 APIs.

Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 arch/arm/mach-s5p64x0/Kconfig            |   4 +-
 arch/arm/mach-s5p64x0/clock-s5p6440.c    |   9 +-
 arch/arm/mach-s5p64x0/clock-s5p6450.c    |   9 +-
 arch/arm/mach-s5p64x0/dma.c              | 273 ++++++++++++++++++++-----------
 arch/arm/mach-s5p64x0/include/mach/dma.h |   2 +-
 5 files changed, 201 insertions(+), 96 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig
index 65c7518dad7..9527ed24dbf 100644
--- a/arch/arm/mach-s5p64x0/Kconfig
+++ b/arch/arm/mach-s5p64x0/Kconfig
@@ -9,14 +9,14 @@ if ARCH_S5P64X0
 
 config CPU_S5P6440
 	bool
-	select S3C_PL330_DMA
+	select SAMSUNG_DMADEV
 	select S5P_HRT
 	help
 	  Enable S5P6440 CPU support
 
 config CPU_S5P6450
 	bool
-	select S3C_PL330_DMA
+	select SAMSUNG_DMADEV
 	select S5P_HRT
 	help
 	  Enable S5P6450 CPU support
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c
index 0e9cd3092dd..c1f548f69a0 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6440.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c
@@ -146,7 +146,7 @@ static struct clk init_clocks_off[] = {
 		.enable		= s5p64x0_hclk0_ctrl,
 		.ctrlbit	= (1 << 8),
 	}, {
-		.name		= "pdma",
+		.name		= "dma",
 		.parent		= &clk_hclk_low.clk,
 		.enable		= s5p64x0_hclk0_ctrl,
 		.ctrlbit	= (1 << 12),
@@ -499,6 +499,11 @@ static struct clksrc_clk *sysclks[] = {
 	&clk_pclk_low,
 };
 
+static struct clk dummy_apb_pclk = {
+	.name		= "apb_pclk",
+	.id		= -1,
+};
+
 void __init_or_cpufreq s5p6440_setup_clocks(void)
 {
 	struct clk *xtal_clk;
@@ -581,5 +586,7 @@ void __init s5p6440_register_clocks(void)
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
+	s3c24xx_register_clock(&dummy_apb_pclk);
+
 	s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c
index d9dc16cde10..3d9b6097557 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6450.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c
@@ -179,7 +179,7 @@ static struct clk init_clocks_off[] = {
 		.enable		= s5p64x0_hclk0_ctrl,
 		.ctrlbit	= (1 << 3),
 	}, {
-		.name		= "pdma",
+		.name		= "dma",
 		.parent		= &clk_hclk_low.clk,
 		.enable		= s5p64x0_hclk0_ctrl,
 		.ctrlbit	= (1 << 12),
@@ -553,6 +553,11 @@ static struct clksrc_clk *sysclks[] = {
 	&clk_sclk_audio0,
 };
 
+static struct clk dummy_apb_pclk = {
+	.name		= "apb_pclk",
+	.id		= -1,
+};
+
 void __init_or_cpufreq s5p6450_setup_clocks(void)
 {
 	struct clk *xtal_clk;
@@ -632,5 +637,7 @@ void __init s5p6450_register_clocks(void)
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
+	s3c24xx_register_clock(&dummy_apb_pclk);
+
 	s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c
index d7ad944b347..aebf3fcb1eb 100644
--- a/arch/arm/mach-s5p64x0/dma.c
+++ b/arch/arm/mach-s5p64x0/dma.c
@@ -21,128 +21,219 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */
 
-#include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl330.h>
+
+#include <asm/irq.h>
 
 #include <mach/map.h>
 #include <mach/irqs.h>
 #include <mach/regs-clock.h>
+#include <mach/dma.h>
 
 #include <plat/devs.h>
-#include <plat/s3c-pl330-pdata.h>
+#include <plat/irqs.h>
 
 static u64 dma_dmamask = DMA_BIT_MASK(32);
 
-static struct resource s5p64x0_pdma_resource[] = {
-	[0] = {
-		.start	= S5P64X0_PA_PDMA,
-		.end	= S5P64X0_PA_PDMA + SZ_4K,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_DMA0,
-		.end	= IRQ_DMA0,
-		.flags	= IORESOURCE_IRQ,
+struct dma_pl330_peri s5p6440_pdma_peri[22] = {
+	{
+		.peri_id = (u8)DMACH_UART0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART3_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART3_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = DMACH_MAX,
+	}, {
+		.peri_id = DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_PCM0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_RX,
+		.rqtype = DEVTOMEM,
 	},
 };
 
-static struct s3c_pl330_platdata s5p6440_pdma_pdata = {
-	.peri = {
-		[0] = DMACH_UART0_RX,
-		[1] = DMACH_UART0_TX,
-		[2] = DMACH_UART1_RX,
-		[3] = DMACH_UART1_TX,
-		[4] = DMACH_UART2_RX,
-		[5] = DMACH_UART2_TX,
-		[6] = DMACH_UART3_RX,
-		[7] = DMACH_UART3_TX,
-		[8] = DMACH_MAX,
-		[9] = DMACH_MAX,
-		[10] = DMACH_PCM0_TX,
-		[11] = DMACH_PCM0_RX,
-		[12] = DMACH_I2S0_TX,
-		[13] = DMACH_I2S0_RX,
-		[14] = DMACH_SPI0_TX,
-		[15] = DMACH_SPI0_RX,
-		[16] = DMACH_MAX,
-		[17] = DMACH_MAX,
-		[18] = DMACH_MAX,
-		[19] = DMACH_MAX,
-		[20] = DMACH_SPI1_TX,
-		[21] = DMACH_SPI1_RX,
-		[22] = DMACH_MAX,
-		[23] = DMACH_MAX,
-		[24] = DMACH_MAX,
-		[25] = DMACH_MAX,
-		[26] = DMACH_MAX,
-		[27] = DMACH_MAX,
-		[28] = DMACH_MAX,
-		[29] = DMACH_PWM,
-		[30] = DMACH_MAX,
-		[31] = DMACH_MAX,
-	},
+struct dma_pl330_platdata s5p6440_pdma_pdata = {
+	.nr_valid_peri = ARRAY_SIZE(s5p6440_pdma_peri),
+	.peri = s5p6440_pdma_peri,
 };
 
-static struct s3c_pl330_platdata s5p6450_pdma_pdata = {
-	.peri = {
-		[0] = DMACH_UART0_RX,
-		[1] = DMACH_UART0_TX,
-		[2] = DMACH_UART1_RX,
-		[3] = DMACH_UART1_TX,
-		[4] = DMACH_UART2_RX,
-		[5] = DMACH_UART2_TX,
-		[6] = DMACH_UART3_RX,
-		[7] = DMACH_UART3_TX,
-		[8] = DMACH_UART4_RX,
-		[9] = DMACH_UART4_TX,
-		[10] = DMACH_PCM0_TX,
-		[11] = DMACH_PCM0_RX,
-		[12] = DMACH_I2S0_TX,
-		[13] = DMACH_I2S0_RX,
-		[14] = DMACH_SPI0_TX,
-		[15] = DMACH_SPI0_RX,
-		[16] = DMACH_PCM1_TX,
-		[17] = DMACH_PCM1_RX,
-		[18] = DMACH_PCM2_TX,
-		[19] = DMACH_PCM2_RX,
-		[20] = DMACH_SPI1_TX,
-		[21] = DMACH_SPI1_RX,
-		[22] = DMACH_USI_TX,
-		[23] = DMACH_USI_RX,
-		[24] = DMACH_MAX,
-		[25] = DMACH_I2S1_TX,
-		[26] = DMACH_I2S1_RX,
-		[27] = DMACH_I2S2_TX,
-		[28] = DMACH_I2S2_RX,
-		[29] = DMACH_PWM,
-		[30] = DMACH_UART5_RX,
-		[31] = DMACH_UART5_TX,
+struct dma_pl330_peri s5p6450_pdma_peri[32] = {
+	{
+		.peri_id = (u8)DMACH_UART0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART3_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART3_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART4_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART4_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_USI_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_USI_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PWM,
+	}, {
+		.peri_id = (u8)DMACH_UART5_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART5_TX,
+		.rqtype = MEMTODEV,
 	},
 };
 
-static struct platform_device s5p64x0_device_pdma = {
-	.name		= "s3c-pl330",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5p64x0_pdma_resource),
-	.resource	= s5p64x0_pdma_resource,
-	.dev		= {
+struct dma_pl330_platdata s5p6450_pdma_pdata = {
+	.nr_valid_peri = ARRAY_SIZE(s5p6450_pdma_peri),
+	.peri = s5p6450_pdma_peri,
+};
+
+struct amba_device s5p64x0_device_pdma = {
+	.dev = {
+		.init_name = "dma-pl330",
 		.dma_mask = &dma_dmamask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
+	.res = {
+		.start = S5P64X0_PA_PDMA,
+		.end = S5P64X0_PA_PDMA + SZ_4K,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_DMA0, NO_IRQ},
+	.periphid = 0x00041330,
 };
 
 static int __init s5p64x0_dma_init(void)
 {
-	unsigned int id;
-
-	id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000;
+	unsigned int id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000;
 
 	if (id == 0x50000)
 		s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata;
 	else
 		s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata;
 
-	platform_device_register(&s5p64x0_device_pdma);
+	amba_device_register(&s5p64x0_device_pdma, &iomem_resource);
 
 	return 0;
 }
diff --git a/arch/arm/mach-s5p64x0/include/mach/dma.h b/arch/arm/mach-s5p64x0/include/mach/dma.h
index 1beae2cca6a..5a622af461d 100644
--- a/arch/arm/mach-s5p64x0/include/mach/dma.h
+++ b/arch/arm/mach-s5p64x0/include/mach/dma.h
@@ -20,7 +20,7 @@
 #ifndef __MACH_DMA_H
 #define __MACH_DMA_H
 
-/* This platform uses the common S3C DMA API driver for PL330 */
+/* This platform uses the common common DMA API driver for PL330 */
 #include <plat/dma-pl330.h>
 
 #endif /* __MACH_DMA_H */
-- 
cgit v1.2.3-18-g5258


From 978ce50dd5cfd93380ded89d61de9d8109ebd814 Mon Sep 17 00:00:00 2001
From: Boojin Kim <boojin.kim@samsung.com>
Date: Fri, 2 Sep 2011 09:44:40 +0900
Subject: ARM: SAMSUNG: Remove S3C-PL330-DMA driver

Since DMA generic APIs can be used for Samsung DMA now so that
the s3c-pl330 which includes Samsung specific DMA APIs can be
removed.

Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Cc: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 arch/arm/plat-samsung/Kconfig                      |    6 -
 arch/arm/plat-samsung/Makefile                     |    2 -
 arch/arm/plat-samsung/include/plat/dma-pl330.h     |   10 +-
 .../plat-samsung/include/plat/s3c-pl330-pdata.h    |   32 -
 arch/arm/plat-samsung/s3c-pl330.c                  | 1244 --------------------
 5 files changed, 6 insertions(+), 1288 deletions(-)
 delete mode 100644 arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h
 delete mode 100644 arch/arm/plat-samsung/s3c-pl330.c

(limited to 'arch')

diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index e6f01ab8620..0a3eec616d6 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -300,12 +300,6 @@ config S3C_DMA
 	help
 	  Internal configuration for S3C DMA core
 
-config S3C_PL330_DMA
-	bool
-	select PL330
-	help
-	  S3C DMA API Driver for PL330 DMAC.
-
 config SAMSUNG_DMADEV
 	bool
 	select DMADEVICES
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index e2ee0b8a376..90758494cad 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -67,8 +67,6 @@ obj-$(CONFIG_S3C_DMA)		+= dma.o s3c-dma-ops.o
 
 obj-$(CONFIG_SAMSUNG_DMADEV)	+= dma-ops.o
 
-obj-$(CONFIG_S3C_PL330_DMA)	+= s3c-pl330.o s3c-dma-ops.o
-
 # PM support
 
 obj-$(CONFIG_PM)		+= pm.o
diff --git a/arch/arm/plat-samsung/include/plat/dma-pl330.h b/arch/arm/plat-samsung/include/plat/dma-pl330.h
index 2916920034f..9a1dadb0218 100644
--- a/arch/arm/plat-samsung/include/plat/dma-pl330.h
+++ b/arch/arm/plat-samsung/include/plat/dma-pl330.h
@@ -11,9 +11,6 @@
 #ifndef __DMA_PL330_H_
 #define __DMA_PL330_H_ __FILE__
 
-#define S3C2410_DMAF_AUTOSTART		(1 << 0)
-#define S3C2410_DMAF_CIRCULAR		(1 << 1)
-
 /*
  * PL330 can assign any channel to communicate with
  * any of the peripherals attched to the DMAC.
@@ -88,6 +85,10 @@ enum dma_ch {
 	DMACH_MAX,
 };
 
+struct s3c2410_dma_client {
+	char	*name;
+};
+
 static inline bool s3c_dma_has_circular(void)
 {
 	return true;
@@ -97,6 +98,7 @@ static inline bool samsung_dma_is_dmadev(void)
 {
 	return true;
 }
-#include <plat/dma.h>
+
+#include <plat/dma-ops.h>
 
 #endif	/* __DMA_PL330_H_ */
diff --git a/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h b/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h
deleted file mode 100644
index 64fdf66ff9c..00000000000
--- a/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __S3C_PL330_PDATA_H
-#define __S3C_PL330_PDATA_H
-
-#include <plat/dma-pl330.h>
-
-/*
- * Every PL330 DMAC has max 32 peripheral interfaces,
- * of which some may be not be really used in your
- * DMAC's configuration.
- * Populate this array of 32 peri i/fs with relevant
- * channel IDs for used peri i/f and DMACH_MAX for
- * those unused.
- *
- * The platforms just need to provide this info
- * to the S3C DMA API driver for PL330.
- */
-struct s3c_pl330_platdata {
-	enum dma_ch peri[32];
-};
-
-#endif /* __S3C_PL330_PDATA_H */
diff --git a/arch/arm/plat-samsung/s3c-pl330.c b/arch/arm/plat-samsung/s3c-pl330.c
deleted file mode 100644
index f85638c6f5a..00000000000
--- a/arch/arm/plat-samsung/s3c-pl330.c
+++ /dev/null
@@ -1,1244 +0,0 @@
-/* linux/arch/arm/plat-samsung/s3c-pl330.c
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-#include <asm/hardware/pl330.h>
-
-#include <plat/s3c-pl330-pdata.h>
-
-/**
- * struct s3c_pl330_dmac - Logical representation of a PL330 DMAC.
- * @busy_chan: Number of channels currently busy.
- * @peri: List of IDs of peripherals this DMAC can work with.
- * @node: To attach to the global list of DMACs.
- * @pi: PL330 configuration info for the DMAC.
- * @kmcache: Pool to quickly allocate xfers for all channels in the dmac.
- * @clk: Pointer of DMAC operation clock.
- */
-struct s3c_pl330_dmac {
-	unsigned		busy_chan;
-	enum dma_ch		*peri;
-	struct list_head	node;
-	struct pl330_info	*pi;
-	struct kmem_cache	*kmcache;
-	struct clk		*clk;
-};
-
-/**
- * struct s3c_pl330_xfer - A request submitted by S3C DMA clients.
- * @token: Xfer ID provided by the client.
- * @node: To attach to the list of xfers on a channel.
- * @px: Xfer for PL330 core.
- * @chan: Owner channel of this xfer.
- */
-struct s3c_pl330_xfer {
-	void			*token;
-	struct list_head	node;
-	struct pl330_xfer	px;
-	struct s3c_pl330_chan	*chan;
-};
-
-/**
- * struct s3c_pl330_chan - Logical channel to communicate with
- * 	a Physical peripheral.
- * @pl330_chan_id: Token of a hardware channel thread of PL330 DMAC.
- * 	NULL if the channel is available to be acquired.
- * @id: ID of the peripheral that this channel can communicate with.
- * @options: Options specified by the client.
- * @sdaddr: Address provided via s3c2410_dma_devconfig.
- * @node: To attach to the global list of channels.
- * @lrq: Pointer to the last submitted pl330_req to PL330 core.
- * @xfer_list: To manage list of xfers enqueued.
- * @req: Two requests to communicate with the PL330 engine.
- * @callback_fn: Callback function to the client.
- * @rqcfg: Channel configuration for the xfers.
- * @xfer_head: Pointer to the xfer to be next executed.
- * @dmac: Pointer to the DMAC that manages this channel, NULL if the
- * 	channel is available to be acquired.
- * @client: Client of this channel. NULL if the
- * 	channel is available to be acquired.
- */
-struct s3c_pl330_chan {
-	void				*pl330_chan_id;
-	enum dma_ch			id;
-	unsigned int			options;
-	unsigned long			sdaddr;
-	struct list_head		node;
-	struct pl330_req		*lrq;
-	struct list_head		xfer_list;
-	struct pl330_req		req[2];
-	s3c2410_dma_cbfn_t		callback_fn;
-	struct pl330_reqcfg		rqcfg;
-	struct s3c_pl330_xfer		*xfer_head;
-	struct s3c_pl330_dmac		*dmac;
-	struct s3c2410_dma_client	*client;
-};
-
-/* All DMACs in the platform */
-static LIST_HEAD(dmac_list);
-
-/* All channels to peripherals in the platform */
-static LIST_HEAD(chan_list);
-
-/*
- * Since we add resources(DMACs and Channels) to the global pool,
- * we need to guard access to the resources using a global lock
- */
-static DEFINE_SPINLOCK(res_lock);
-
-/* Returns the channel with ID 'id' in the chan_list */
-static struct s3c_pl330_chan *id_to_chan(const enum dma_ch id)
-{
-	struct s3c_pl330_chan *ch;
-
-	list_for_each_entry(ch, &chan_list, node)
-		if (ch->id == id)
-			return ch;
-
-	return NULL;
-}
-
-/* Allocate a new channel with ID 'id' and add to chan_list */
-static void chan_add(const enum dma_ch id)
-{
-	struct s3c_pl330_chan *ch = id_to_chan(id);
-
-	/* Return if the channel already exists */
-	if (ch)
-		return;
-
-	ch = kmalloc(sizeof(*ch), GFP_KERNEL);
-	/* Return silently to work with other channels */
-	if (!ch)
-		return;
-
-	ch->id = id;
-	ch->dmac = NULL;
-
-	list_add_tail(&ch->node, &chan_list);
-}
-
-/* If the channel is not yet acquired by any client */
-static bool chan_free(struct s3c_pl330_chan *ch)
-{
-	if (!ch)
-		return false;
-
-	/* Channel points to some DMAC only when it's acquired */
-	return ch->dmac ? false : true;
-}
-
-/*
- * Returns 0 is peripheral i/f is invalid or not present on the dmac.
- * Index + 1, otherwise.
- */
-static unsigned iface_of_dmac(struct s3c_pl330_dmac *dmac, enum dma_ch ch_id)
-{
-	enum dma_ch *id = dmac->peri;
-	int i;
-
-	/* Discount invalid markers */
-	if (ch_id == DMACH_MAX)
-		return 0;
-
-	for (i = 0; i < PL330_MAX_PERI; i++)
-		if (id[i] == ch_id)
-			return i + 1;
-
-	return 0;
-}
-
-/* If all channel threads of the DMAC are busy */
-static inline bool dmac_busy(struct s3c_pl330_dmac *dmac)
-{
-	struct pl330_info *pi = dmac->pi;
-
-	return (dmac->busy_chan < pi->pcfg.num_chan) ? false : true;
-}
-
-/*
- * Returns the number of free channels that
- * can be handled by this dmac only.
- */
-static unsigned ch_onlyby_dmac(struct s3c_pl330_dmac *dmac)
-{
-	enum dma_ch *id = dmac->peri;
-	struct s3c_pl330_dmac *d;
-	struct s3c_pl330_chan *ch;
-	unsigned found, count = 0;
-	enum dma_ch p;
-	int i;
-
-	for (i = 0; i < PL330_MAX_PERI; i++) {
-		p = id[i];
-		ch = id_to_chan(p);
-
-		if (p == DMACH_MAX || !chan_free(ch))
-			continue;
-
-		found = 0;
-		list_for_each_entry(d, &dmac_list, node) {
-			if (d != dmac && iface_of_dmac(d, ch->id)) {
-				found = 1;
-				break;
-			}
-		}
-		if (!found)
-			count++;
-	}
-
-	return count;
-}
-
-/*
- * Measure of suitability of 'dmac' handling 'ch'
- *
- * 0 indicates 'dmac' can not handle 'ch' either
- * because it is not supported by the hardware or
- * because all dmac channels are currently busy.
- *
- * >0 vlaue indicates 'dmac' has the capability.
- * The bigger the value the more suitable the dmac.
- */
-#define MAX_SUIT	UINT_MAX
-#define MIN_SUIT	0
-
-static unsigned suitablility(struct s3c_pl330_dmac *dmac,
-		struct s3c_pl330_chan *ch)
-{
-	struct pl330_info *pi = dmac->pi;
-	enum dma_ch *id = dmac->peri;
-	struct s3c_pl330_dmac *d;
-	unsigned s;
-	int i;
-
-	s = MIN_SUIT;
-	/* If all the DMAC channel threads are busy */
-	if (dmac_busy(dmac))
-		return s;
-
-	for (i = 0; i < PL330_MAX_PERI; i++)
-		if (id[i] == ch->id)
-			break;
-
-	/* If the 'dmac' can't talk to 'ch' */
-	if (i == PL330_MAX_PERI)
-		return s;
-
-	s = MAX_SUIT;
-	list_for_each_entry(d, &dmac_list, node) {
-		/*
-		 * If some other dmac can talk to this
-		 * peri and has some channel free.
-		 */
-		if (d != dmac && iface_of_dmac(d, ch->id) && !dmac_busy(d)) {
-			s = 0;
-			break;
-		}
-	}
-	if (s)
-		return s;
-
-	s = 100;
-
-	/* Good if free chans are more, bad otherwise */
-	s += (pi->pcfg.num_chan - dmac->busy_chan) - ch_onlyby_dmac(dmac);
-
-	return s;
-}
-
-/* More than one DMAC may have capability to transfer data with the
- * peripheral. This function assigns most suitable DMAC to manage the
- * channel and hence communicate with the peripheral.
- */
-static struct s3c_pl330_dmac *map_chan_to_dmac(struct s3c_pl330_chan *ch)
-{
-	struct s3c_pl330_dmac *d, *dmac = NULL;
-	unsigned sn, sl = MIN_SUIT;
-
-	list_for_each_entry(d, &dmac_list, node) {
-		sn = suitablility(d, ch);
-
-		if (sn == MAX_SUIT)
-			return d;
-
-		if (sn > sl)
-			dmac = d;
-	}
-
-	return dmac;
-}
-
-/* Acquire the channel for peripheral 'id' */
-static struct s3c_pl330_chan *chan_acquire(const enum dma_ch id)
-{
-	struct s3c_pl330_chan *ch = id_to_chan(id);
-	struct s3c_pl330_dmac *dmac;
-
-	/* If the channel doesn't exist or is already acquired */
-	if (!ch || !chan_free(ch)) {
-		ch = NULL;
-		goto acq_exit;
-	}
-
-	dmac = map_chan_to_dmac(ch);
-	/* If couldn't map */
-	if (!dmac) {
-		ch = NULL;
-		goto acq_exit;
-	}
-
-	dmac->busy_chan++;
-	ch->dmac = dmac;
-
-acq_exit:
-	return ch;
-}
-
-/* Delete xfer from the queue */
-static inline void del_from_queue(struct s3c_pl330_xfer *xfer)
-{
-	struct s3c_pl330_xfer *t;
-	struct s3c_pl330_chan *ch;
-	int found;
-
-	if (!xfer)
-		return;
-
-	ch = xfer->chan;
-
-	/* Make sure xfer is in the queue */
-	found = 0;
-	list_for_each_entry(t, &ch->xfer_list, node)
-		if (t == xfer) {
-			found = 1;
-			break;
-		}
-
-	if (!found)
-		return;
-
-	/* If xfer is last entry in the queue */
-	if (xfer->node.next == &ch->xfer_list)
-		t = list_entry(ch->xfer_list.next,
-				struct s3c_pl330_xfer, node);
-	else
-		t = list_entry(xfer->node.next,
-				struct s3c_pl330_xfer, node);
-
-	/* If there was only one node left */
-	if (t == xfer)
-		ch->xfer_head = NULL;
-	else if (ch->xfer_head == xfer)
-		ch->xfer_head = t;
-
-	list_del(&xfer->node);
-}
-
-/* Provides pointer to the next xfer in the queue.
- * If CIRCULAR option is set, the list is left intact,
- * otherwise the xfer is removed from the list.
- * Forced delete 'pluck' can be set to override the CIRCULAR option.
- */
-static struct s3c_pl330_xfer *get_from_queue(struct s3c_pl330_chan *ch,
-		int pluck)
-{
-	struct s3c_pl330_xfer *xfer = ch->xfer_head;
-
-	if (!xfer)
-		return NULL;
-
-	/* If xfer is last entry in the queue */
-	if (xfer->node.next == &ch->xfer_list)
-		ch->xfer_head = list_entry(ch->xfer_list.next,
-					struct s3c_pl330_xfer, node);
-	else
-		ch->xfer_head = list_entry(xfer->node.next,
-					struct s3c_pl330_xfer, node);
-
-	if (pluck || !(ch->options & S3C2410_DMAF_CIRCULAR))
-		del_from_queue(xfer);
-
-	return xfer;
-}
-
-static inline void add_to_queue(struct s3c_pl330_chan *ch,
-		struct s3c_pl330_xfer *xfer, int front)
-{
-	struct pl330_xfer *xt;
-
-	/* If queue empty */
-	if (ch->xfer_head == NULL)
-		ch->xfer_head = xfer;
-
-	xt = &ch->xfer_head->px;
-	/* If the head already submitted (CIRCULAR head) */
-	if (ch->options & S3C2410_DMAF_CIRCULAR &&
-		(xt == ch->req[0].x || xt == ch->req[1].x))
-		ch->xfer_head = xfer;
-
-	/* If this is a resubmission, it should go at the head */
-	if (front) {
-		ch->xfer_head = xfer;
-		list_add(&xfer->node, &ch->xfer_list);
-	} else {
-		list_add_tail(&xfer->node, &ch->xfer_list);
-	}
-}
-
-static inline void _finish_off(struct s3c_pl330_xfer *xfer,
-		enum s3c2410_dma_buffresult res, int ffree)
-{
-	struct s3c_pl330_chan *ch;
-
-	if (!xfer)
-		return;
-
-	ch = xfer->chan;
-
-	/* Do callback */
-	if (ch->callback_fn)
-		ch->callback_fn(NULL, xfer->token, xfer->px.bytes, res);
-
-	/* Force Free or if buffer is not needed anymore */
-	if (ffree || !(ch->options & S3C2410_DMAF_CIRCULAR))
-		kmem_cache_free(ch->dmac->kmcache, xfer);
-}
-
-static inline int s3c_pl330_submit(struct s3c_pl330_chan *ch,
-		struct pl330_req *r)
-{
-	struct s3c_pl330_xfer *xfer;
-	int ret = 0;
-
-	/* If already submitted */
-	if (r->x)
-		return 0;
-
-	xfer = get_from_queue(ch, 0);
-	if (xfer) {
-		r->x = &xfer->px;
-
-		/* Use max bandwidth for M<->M xfers */
-		if (r->rqtype == MEMTOMEM) {
-			struct pl330_info *pi = xfer->chan->dmac->pi;
-			int burst = 1 << ch->rqcfg.brst_size;
-			u32 bytes = r->x->bytes;
-			int bl;
-
-			bl = pi->pcfg.data_bus_width / 8;
-			bl *= pi->pcfg.data_buf_dep;
-			bl /= burst;
-
-			/* src/dst_burst_len can't be more than 16 */
-			if (bl > 16)
-				bl = 16;
-
-			while (bl > 1) {
-				if (!(bytes % (bl * burst)))
-					break;
-				bl--;
-			}
-
-			ch->rqcfg.brst_len = bl;
-		} else {
-			ch->rqcfg.brst_len = 1;
-		}
-
-		ret = pl330_submit_req(ch->pl330_chan_id, r);
-
-		/* If submission was successful */
-		if (!ret) {
-			ch->lrq = r; /* latest submitted req */
-			return 0;
-		}
-
-		r->x = NULL;
-
-		/* If both of the PL330 ping-pong buffers filled */
-		if (ret == -EAGAIN) {
-			dev_err(ch->dmac->pi->dev, "%s:%d!\n",
-				__func__, __LINE__);
-			/* Queue back again */
-			add_to_queue(ch, xfer, 1);
-			ret = 0;
-		} else {
-			dev_err(ch->dmac->pi->dev, "%s:%d!\n",
-				__func__, __LINE__);
-			_finish_off(xfer, S3C2410_RES_ERR, 0);
-		}
-	}
-
-	return ret;
-}
-
-static void s3c_pl330_rq(struct s3c_pl330_chan *ch,
-	struct pl330_req *r, enum pl330_op_err err)
-{
-	unsigned long flags;
-	struct s3c_pl330_xfer *xfer;
-	struct pl330_xfer *xl = r->x;
-	enum s3c2410_dma_buffresult res;
-
-	spin_lock_irqsave(&res_lock, flags);
-
-	r->x = NULL;
-
-	s3c_pl330_submit(ch, r);
-
-	spin_unlock_irqrestore(&res_lock, flags);
-
-	/* Map result to S3C DMA API */
-	if (err == PL330_ERR_NONE)
-		res = S3C2410_RES_OK;
-	else if (err == PL330_ERR_ABORT)
-		res = S3C2410_RES_ABORT;
-	else
-		res = S3C2410_RES_ERR;
-
-	/* If last request had some xfer */
-	if (xl) {
-		xfer = container_of(xl, struct s3c_pl330_xfer, px);
-		_finish_off(xfer, res, 0);
-	} else {
-		dev_info(ch->dmac->pi->dev, "%s:%d No Xfer?!\n",
-			__func__, __LINE__);
-	}
-}
-
-static void s3c_pl330_rq0(void *token, enum pl330_op_err err)
-{
-	struct pl330_req *r = token;
-	struct s3c_pl330_chan *ch = container_of(r,
-					struct s3c_pl330_chan, req[0]);
-	s3c_pl330_rq(ch, r, err);
-}
-
-static void s3c_pl330_rq1(void *token, enum pl330_op_err err)
-{
-	struct pl330_req *r = token;
-	struct s3c_pl330_chan *ch = container_of(r,
-					struct s3c_pl330_chan, req[1]);
-	s3c_pl330_rq(ch, r, err);
-}
-
-/* Release an acquired channel */
-static void chan_release(struct s3c_pl330_chan *ch)
-{
-	struct s3c_pl330_dmac *dmac;
-
-	if (chan_free(ch))
-		return;
-
-	dmac = ch->dmac;
-	ch->dmac = NULL;
-	dmac->busy_chan--;
-}
-
-int s3c2410_dma_ctrl(enum dma_ch id, enum s3c2410_chan_op op)
-{
-	struct s3c_pl330_xfer *xfer;
-	enum pl330_chan_op pl330op;
-	struct s3c_pl330_chan *ch;
-	unsigned long flags;
-	int idx, ret;
-
-	spin_lock_irqsave(&res_lock, flags);
-
-	ch = id_to_chan(id);
-
-	if (!ch || chan_free(ch)) {
-		ret = -EINVAL;
-		goto ctrl_exit;
-	}
-
-	switch (op) {
-	case S3C2410_DMAOP_START:
-		/* Make sure both reqs are enqueued */
-		idx = (ch->lrq == &ch->req[0]) ? 1 : 0;
-		s3c_pl330_submit(ch, &ch->req[idx]);
-		s3c_pl330_submit(ch, &ch->req[1 - idx]);
-		pl330op = PL330_OP_START;
-		break;
-
-	case S3C2410_DMAOP_STOP:
-		pl330op = PL330_OP_ABORT;
-		break;
-
-	case S3C2410_DMAOP_FLUSH:
-		pl330op = PL330_OP_FLUSH;
-		break;
-
-	case S3C2410_DMAOP_PAUSE:
-	case S3C2410_DMAOP_RESUME:
-	case S3C2410_DMAOP_TIMEOUT:
-	case S3C2410_DMAOP_STARTED:
-		spin_unlock_irqrestore(&res_lock, flags);
-		return 0;
-
-	default:
-		spin_unlock_irqrestore(&res_lock, flags);
-		return -EINVAL;
-	}
-
-	ret = pl330_chan_ctrl(ch->pl330_chan_id, pl330op);
-
-	if (pl330op == PL330_OP_START) {
-		spin_unlock_irqrestore(&res_lock, flags);
-		return ret;
-	}
-
-	idx = (ch->lrq == &ch->req[0]) ? 1 : 0;
-
-	/* Abort the current xfer */
-	if (ch->req[idx].x) {
-		xfer = container_of(ch->req[idx].x,
-				struct s3c_pl330_xfer, px);
-
-		/* Drop xfer during FLUSH */
-		if (pl330op == PL330_OP_FLUSH)
-			del_from_queue(xfer);
-
-		ch->req[idx].x = NULL;
-
-		spin_unlock_irqrestore(&res_lock, flags);
-		_finish_off(xfer, S3C2410_RES_ABORT,
-				pl330op == PL330_OP_FLUSH ? 1 : 0);
-		spin_lock_irqsave(&res_lock, flags);
-	}
-
-	/* Flush the whole queue */
-	if (pl330op == PL330_OP_FLUSH) {
-
-		if (ch->req[1 - idx].x) {
-			xfer = container_of(ch->req[1 - idx].x,
-					struct s3c_pl330_xfer, px);
-
-			del_from_queue(xfer);
-
-			ch->req[1 - idx].x = NULL;
-
-			spin_unlock_irqrestore(&res_lock, flags);
-			_finish_off(xfer, S3C2410_RES_ABORT, 1);
-			spin_lock_irqsave(&res_lock, flags);
-		}
-
-		/* Finish off the remaining in the queue */
-		xfer = ch->xfer_head;
-		while (xfer) {
-
-			del_from_queue(xfer);
-
-			spin_unlock_irqrestore(&res_lock, flags);
-			_finish_off(xfer, S3C2410_RES_ABORT, 1);
-			spin_lock_irqsave(&res_lock, flags);
-
-			xfer = ch->xfer_head;
-		}
-	}
-
-ctrl_exit:
-	spin_unlock_irqrestore(&res_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c2410_dma_ctrl);
-
-int s3c2410_dma_enqueue(enum dma_ch id, void *token,
-			dma_addr_t addr, int size)
-{
-	struct s3c_pl330_chan *ch;
-	struct s3c_pl330_xfer *xfer;
-	unsigned long flags;
-	int idx, ret = 0;
-
-	spin_lock_irqsave(&res_lock, flags);
-
-	ch = id_to_chan(id);
-
-	/* Error if invalid or free channel */
-	if (!ch || chan_free(ch)) {
-		ret = -EINVAL;
-		goto enq_exit;
-	}
-
-	/* Error if size is unaligned */
-	if (ch->rqcfg.brst_size && size % (1 << ch->rqcfg.brst_size)) {
-		ret = -EINVAL;
-		goto enq_exit;
-	}
-
-	xfer = kmem_cache_alloc(ch->dmac->kmcache, GFP_ATOMIC);
-	if (!xfer) {
-		ret = -ENOMEM;
-		goto enq_exit;
-	}
-
-	xfer->token = token;
-	xfer->chan = ch;
-	xfer->px.bytes = size;
-	xfer->px.next = NULL; /* Single request */
-
-	/* For S3C DMA API, direction is always fixed for all xfers */
-	if (ch->req[0].rqtype == MEMTODEV) {
-		xfer->px.src_addr = addr;
-		xfer->px.dst_addr = ch->sdaddr;
-	} else {
-		xfer->px.src_addr = ch->sdaddr;
-		xfer->px.dst_addr = addr;
-	}
-
-	add_to_queue(ch, xfer, 0);
-
-	/* Try submitting on either request */
-	idx = (ch->lrq == &ch->req[0]) ? 1 : 0;
-
-	if (!ch->req[idx].x)
-		s3c_pl330_submit(ch, &ch->req[idx]);
-	else
-		s3c_pl330_submit(ch, &ch->req[1 - idx]);
-
-	spin_unlock_irqrestore(&res_lock, flags);
-
-	if (ch->options & S3C2410_DMAF_AUTOSTART)
-		s3c2410_dma_ctrl(id, S3C2410_DMAOP_START);
-
-	return 0;
-
-enq_exit:
-	spin_unlock_irqrestore(&res_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c2410_dma_enqueue);
-
-int s3c2410_dma_request(enum dma_ch id,
-			struct s3c2410_dma_client *client,
-			void *dev)
-{
-	struct s3c_pl330_dmac *dmac;
-	struct s3c_pl330_chan *ch;
-	unsigned long flags;
-	int ret = 0;
-
-	spin_lock_irqsave(&res_lock, flags);
-
-	ch = chan_acquire(id);
-	if (!ch) {
-		ret = -EBUSY;
-		goto req_exit;
-	}
-
-	dmac = ch->dmac;
-
-	ch->pl330_chan_id = pl330_request_channel(dmac->pi);
-	if (!ch->pl330_chan_id) {
-		chan_release(ch);
-		ret = -EBUSY;
-		goto req_exit;
-	}
-
-	ch->client = client;
-	ch->options = 0; /* Clear any option */
-	ch->callback_fn = NULL; /* Clear any callback */
-	ch->lrq = NULL;
-
-	ch->rqcfg.brst_size = 2; /* Default word size */
-	ch->rqcfg.swap = SWAP_NO;
-	ch->rqcfg.scctl = SCCTRL0; /* Noncacheable and nonbufferable */
-	ch->rqcfg.dcctl = DCCTRL0; /* Noncacheable and nonbufferable */
-	ch->rqcfg.privileged = 0;
-	ch->rqcfg.insnaccess = 0;
-
-	/* Set invalid direction */
-	ch->req[0].rqtype = DEVTODEV;
-	ch->req[1].rqtype = ch->req[0].rqtype;
-
-	ch->req[0].cfg = &ch->rqcfg;
-	ch->req[1].cfg = ch->req[0].cfg;
-
-	ch->req[0].peri = iface_of_dmac(dmac, id) - 1; /* Original index */
-	ch->req[1].peri = ch->req[0].peri;
-
-	ch->req[0].token = &ch->req[0];
-	ch->req[0].xfer_cb = s3c_pl330_rq0;
-	ch->req[1].token = &ch->req[1];
-	ch->req[1].xfer_cb = s3c_pl330_rq1;
-
-	ch->req[0].x = NULL;
-	ch->req[1].x = NULL;
-
-	/* Reset xfer list */
-	INIT_LIST_HEAD(&ch->xfer_list);
-	ch->xfer_head = NULL;
-
-req_exit:
-	spin_unlock_irqrestore(&res_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c2410_dma_request);
-
-int s3c2410_dma_free(enum dma_ch id, struct s3c2410_dma_client *client)
-{
-	struct s3c_pl330_chan *ch;
-	struct s3c_pl330_xfer *xfer;
-	unsigned long flags;
-	int ret = 0;
-	unsigned idx;
-
-	spin_lock_irqsave(&res_lock, flags);
-
-	ch = id_to_chan(id);
-
-	if (!ch || chan_free(ch))
-		goto free_exit;
-
-	/* Refuse if someone else wanted to free the channel */
-	if (ch->client != client) {
-		ret = -EBUSY;
-		goto free_exit;
-	}
-
-	/* Stop any active xfer, Flushe the queue and do callbacks */
-	pl330_chan_ctrl(ch->pl330_chan_id, PL330_OP_FLUSH);
-
-	/* Abort the submitted requests */
-	idx = (ch->lrq == &ch->req[0]) ? 1 : 0;
-
-	if (ch->req[idx].x) {
-		xfer = container_of(ch->req[idx].x,
-				struct s3c_pl330_xfer, px);
-
-		ch->req[idx].x = NULL;
-		del_from_queue(xfer);
-
-		spin_unlock_irqrestore(&res_lock, flags);
-		_finish_off(xfer, S3C2410_RES_ABORT, 1);
-		spin_lock_irqsave(&res_lock, flags);
-	}
-
-	if (ch->req[1 - idx].x) {
-		xfer = container_of(ch->req[1 - idx].x,
-				struct s3c_pl330_xfer, px);
-
-		ch->req[1 - idx].x = NULL;
-		del_from_queue(xfer);
-
-		spin_unlock_irqrestore(&res_lock, flags);
-		_finish_off(xfer, S3C2410_RES_ABORT, 1);
-		spin_lock_irqsave(&res_lock, flags);
-	}
-
-	/* Pluck and Abort the queued requests in order */
-	do {
-		xfer = get_from_queue(ch, 1);
-
-		spin_unlock_irqrestore(&res_lock, flags);
-		_finish_off(xfer, S3C2410_RES_ABORT, 1);
-		spin_lock_irqsave(&res_lock, flags);
-	} while (xfer);
-
-	ch->client = NULL;
-
-	pl330_release_channel(ch->pl330_chan_id);
-
-	ch->pl330_chan_id = NULL;
-
-	chan_release(ch);
-
-free_exit:
-	spin_unlock_irqrestore(&res_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c2410_dma_free);
-
-int s3c2410_dma_config(enum dma_ch id, int xferunit)
-{
-	struct s3c_pl330_chan *ch;
-	struct pl330_info *pi;
-	unsigned long flags;
-	int i, dbwidth, ret = 0;
-
-	spin_lock_irqsave(&res_lock, flags);
-
-	ch = id_to_chan(id);
-
-	if (!ch || chan_free(ch)) {
-		ret = -EINVAL;
-		goto cfg_exit;
-	}
-
-	pi = ch->dmac->pi;
-	dbwidth = pi->pcfg.data_bus_width / 8;
-
-	/* Max size of xfer can be pcfg.data_bus_width */
-	if (xferunit > dbwidth) {
-		ret = -EINVAL;
-		goto cfg_exit;
-	}
-
-	i = 0;
-	while (xferunit != (1 << i))
-		i++;
-
-	/* If valid value */
-	if (xferunit == (1 << i))
-		ch->rqcfg.brst_size = i;
-	else
-		ret = -EINVAL;
-
-cfg_exit:
-	spin_unlock_irqrestore(&res_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c2410_dma_config);
-
-/* Options that are supported by this driver */
-#define S3C_PL330_FLAGS (S3C2410_DMAF_CIRCULAR | S3C2410_DMAF_AUTOSTART)
-
-int s3c2410_dma_setflags(enum dma_ch id, unsigned int options)
-{
-	struct s3c_pl330_chan *ch;
-	unsigned long flags;
-	int ret = 0;
-
-	spin_lock_irqsave(&res_lock, flags);
-
-	ch = id_to_chan(id);
-
-	if (!ch || chan_free(ch) || options & ~(S3C_PL330_FLAGS))
-		ret = -EINVAL;
-	else
-		ch->options = options;
-
-	spin_unlock_irqrestore(&res_lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_setflags);
-
-int s3c2410_dma_set_buffdone_fn(enum dma_ch id, s3c2410_dma_cbfn_t rtn)
-{
-	struct s3c_pl330_chan *ch;
-	unsigned long flags;
-	int ret = 0;
-
-	spin_lock_irqsave(&res_lock, flags);
-
-	ch = id_to_chan(id);
-
-	if (!ch || chan_free(ch))
-		ret = -EINVAL;
-	else
-		ch->callback_fn = rtn;
-
-	spin_unlock_irqrestore(&res_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
-
-int s3c2410_dma_devconfig(enum dma_ch id, enum s3c2410_dmasrc source,
-			  unsigned long address)
-{
-	struct s3c_pl330_chan *ch;
-	unsigned long flags;
-	int ret = 0;
-
-	spin_lock_irqsave(&res_lock, flags);
-
-	ch = id_to_chan(id);
-
-	if (!ch || chan_free(ch)) {
-		ret = -EINVAL;
-		goto devcfg_exit;
-	}
-
-	switch (source) {
-	case S3C2410_DMASRC_HW: /* P->M */
-		ch->req[0].rqtype = DEVTOMEM;
-		ch->req[1].rqtype = DEVTOMEM;
-		ch->rqcfg.src_inc = 0;
-		ch->rqcfg.dst_inc = 1;
-		break;
-	case S3C2410_DMASRC_MEM: /* M->P */
-		ch->req[0].rqtype = MEMTODEV;
-		ch->req[1].rqtype = MEMTODEV;
-		ch->rqcfg.src_inc = 1;
-		ch->rqcfg.dst_inc = 0;
-		break;
-	default:
-		ret = -EINVAL;
-		goto devcfg_exit;
-	}
-
-	ch->sdaddr = address;
-
-devcfg_exit:
-	spin_unlock_irqrestore(&res_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c2410_dma_devconfig);
-
-int s3c2410_dma_getposition(enum dma_ch id, dma_addr_t *src, dma_addr_t *dst)
-{
-	struct s3c_pl330_chan *ch = id_to_chan(id);
-	struct pl330_chanstatus status;
-	int ret;
-
-	if (!ch || chan_free(ch))
-		return -EINVAL;
-
-	ret = pl330_chan_status(ch->pl330_chan_id, &status);
-	if (ret < 0)
-		return ret;
-
-	*src = status.src_addr;
-	*dst = status.dst_addr;
-
-	return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_getposition);
-
-static irqreturn_t pl330_irq_handler(int irq, void *data)
-{
-	if (pl330_update(data))
-		return IRQ_HANDLED;
-	else
-		return IRQ_NONE;
-}
-
-static int pl330_probe(struct platform_device *pdev)
-{
-	struct s3c_pl330_dmac *s3c_pl330_dmac;
-	struct s3c_pl330_platdata *pl330pd;
-	struct pl330_info *pl330_info;
-	struct resource *res;
-	int i, ret, irq;
-
-	pl330pd = pdev->dev.platform_data;
-
-	/* Can't do without the list of _32_ peripherals */
-	if (!pl330pd || !pl330pd->peri) {
-		dev_err(&pdev->dev, "platform data missing!\n");
-		return -ENODEV;
-	}
-
-	pl330_info = kzalloc(sizeof(*pl330_info), GFP_KERNEL);
-	if (!pl330_info)
-		return -ENOMEM;
-
-	pl330_info->pl330_data = NULL;
-	pl330_info->dev = &pdev->dev;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		ret = -ENODEV;
-		goto probe_err1;
-	}
-
-	request_mem_region(res->start, resource_size(res), pdev->name);
-
-	pl330_info->base = ioremap(res->start, resource_size(res));
-	if (!pl330_info->base) {
-		ret = -ENXIO;
-		goto probe_err2;
-	}
-
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		ret = irq;
-		goto probe_err3;
-	}
-
-	ret = request_irq(irq, pl330_irq_handler, 0,
-			dev_name(&pdev->dev), pl330_info);
-	if (ret)
-		goto probe_err4;
-
-	/* Allocate a new DMAC */
-	s3c_pl330_dmac = kmalloc(sizeof(*s3c_pl330_dmac), GFP_KERNEL);
-	if (!s3c_pl330_dmac) {
-		ret = -ENOMEM;
-		goto probe_err5;
-	}
-
-	/* Get operation clock and enable it */
-	s3c_pl330_dmac->clk = clk_get(&pdev->dev, "pdma");
-	if (IS_ERR(s3c_pl330_dmac->clk)) {
-		dev_err(&pdev->dev, "Cannot get operation clock.\n");
-		ret = -EINVAL;
-		goto probe_err6;
-	}
-	clk_enable(s3c_pl330_dmac->clk);
-
-	ret = pl330_add(pl330_info);
-	if (ret)
-		goto probe_err7;
-
-	/* Hook the info */
-	s3c_pl330_dmac->pi = pl330_info;
-
-	/* No busy channels */
-	s3c_pl330_dmac->busy_chan = 0;
-
-	s3c_pl330_dmac->kmcache = kmem_cache_create(dev_name(&pdev->dev),
-				sizeof(struct s3c_pl330_xfer), 0, 0, NULL);
-
-	if (!s3c_pl330_dmac->kmcache) {
-		ret = -ENOMEM;
-		goto probe_err8;
-	}
-
-	/* Get the list of peripherals */
-	s3c_pl330_dmac->peri = pl330pd->peri;
-
-	/* Attach to the list of DMACs */
-	list_add_tail(&s3c_pl330_dmac->node, &dmac_list);
-
-	/* Create a channel for each peripheral in the DMAC
-	 * that is, if it doesn't already exist
-	 */
-	for (i = 0; i < PL330_MAX_PERI; i++)
-		if (s3c_pl330_dmac->peri[i] != DMACH_MAX)
-			chan_add(s3c_pl330_dmac->peri[i]);
-
-	printk(KERN_INFO
-		"Loaded driver for PL330 DMAC-%d %s\n",	pdev->id, pdev->name);
-	printk(KERN_INFO
-		"\tDBUFF-%ux%ubytes Num_Chans-%u Num_Peri-%u Num_Events-%u\n",
-		pl330_info->pcfg.data_buf_dep,
-		pl330_info->pcfg.data_bus_width / 8, pl330_info->pcfg.num_chan,
-		pl330_info->pcfg.num_peri, pl330_info->pcfg.num_events);
-
-	return 0;
-
-probe_err8:
-	pl330_del(pl330_info);
-probe_err7:
-	clk_disable(s3c_pl330_dmac->clk);
-	clk_put(s3c_pl330_dmac->clk);
-probe_err6:
-	kfree(s3c_pl330_dmac);
-probe_err5:
-	free_irq(irq, pl330_info);
-probe_err4:
-probe_err3:
-	iounmap(pl330_info->base);
-probe_err2:
-	release_mem_region(res->start, resource_size(res));
-probe_err1:
-	kfree(pl330_info);
-
-	return ret;
-}
-
-static int pl330_remove(struct platform_device *pdev)
-{
-	struct s3c_pl330_dmac *dmac, *d;
-	struct s3c_pl330_chan *ch;
-	unsigned long flags;
-	int del, found;
-
-	if (!pdev->dev.platform_data)
-		return -EINVAL;
-
-	spin_lock_irqsave(&res_lock, flags);
-
-	found = 0;
-	list_for_each_entry(d, &dmac_list, node)
-		if (d->pi->dev == &pdev->dev) {
-			found = 1;
-			break;
-		}
-
-	if (!found) {
-		spin_unlock_irqrestore(&res_lock, flags);
-		return 0;
-	}
-
-	dmac = d;
-
-	/* Remove all Channels that are managed only by this DMAC */
-	list_for_each_entry(ch, &chan_list, node) {
-
-		/* Only channels that are handled by this DMAC */
-		if (iface_of_dmac(dmac, ch->id))
-			del = 1;
-		else
-			continue;
-
-		/* Don't remove if some other DMAC has it too */
-		list_for_each_entry(d, &dmac_list, node)
-			if (d != dmac && iface_of_dmac(d, ch->id)) {
-				del = 0;
-				break;
-			}
-
-		if (del) {
-			spin_unlock_irqrestore(&res_lock, flags);
-			s3c2410_dma_free(ch->id, ch->client);
-			spin_lock_irqsave(&res_lock, flags);
-			list_del(&ch->node);
-			kfree(ch);
-		}
-	}
-
-	/* Disable operation clock */
-	clk_disable(dmac->clk);
-	clk_put(dmac->clk);
-
-	/* Remove the DMAC */
-	list_del(&dmac->node);
-	kfree(dmac);
-
-	spin_unlock_irqrestore(&res_lock, flags);
-
-	return 0;
-}
-
-static struct platform_driver pl330_driver = {
-	.driver		= {
-		.owner	= THIS_MODULE,
-		.name	= "s3c-pl330",
-	},
-	.probe		= pl330_probe,
-	.remove		= pl330_remove,
-};
-
-static int __init pl330_init(void)
-{
-	return platform_driver_register(&pl330_driver);
-}
-module_init(pl330_init);
-
-static void __exit pl330_exit(void)
-{
-	platform_driver_unregister(&pl330_driver);
-	return;
-}
-module_exit(pl330_exit);
-
-MODULE_AUTHOR("Jaswinder Singh <jassi.brar@samsung.com>");
-MODULE_DESCRIPTION("Driver for PL330 DMA Controller");
-MODULE_LICENSE("GPL");
-- 
cgit v1.2.3-18-g5258


From 344b4c48887a443f7478fc7047d1397b20821ed3 Mon Sep 17 00:00:00 2001
From: Boojin Kim <boojin.kim@samsung.com>
Date: Fri, 2 Sep 2011 09:44:43 +0900
Subject: ASoC: Samsung: Update DMA interface

This patch adds to support the DMA PL330 driver that uses
DMA generic API. Samsung sound driver uses DMA generic API
if architecture supports it. Otherwise, use samsung specific
S3C-PL330 API driver to transfer PCM data.

Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Cc: Jassi Brar <jassisinghbrar@gmail.com>
Cc: Liam Girdwood <lrg@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
[kgene.kim@samsung.com: removed useless variable]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 arch/arm/mach-s3c2410/include/mach/dma.h       | 10 +++++-----
 arch/arm/mach-s3c64xx/include/mach/dma.h       |  2 +-
 arch/arm/plat-samsung/include/plat/dma-pl330.h |  2 +-
 3 files changed, 7 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
index e61a91f88c5..4e485bab66d 100644
--- a/arch/arm/mach-s3c2410/include/mach/dma.h
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -50,6 +50,11 @@ enum dma_ch {
 	DMACH_MAX,		/* the end entry */
 };
 
+static inline bool samsung_dma_has_circular(void)
+{
+	return false;
+}
+
 static inline bool samsung_dma_is_dmadev(void)
 {
 	return false;
@@ -202,9 +207,4 @@ struct s3c2410_dma_chan {
 
 typedef unsigned long dma_device_t;
 
-static inline bool s3c_dma_has_circular(void)
-{
-	return false;
-}
-
 #endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h
index 49c3a53135d..74fdf25c904 100644
--- a/arch/arm/mach-s3c64xx/include/mach/dma.h
+++ b/arch/arm/mach-s3c64xx/include/mach/dma.h
@@ -58,7 +58,7 @@ enum dma_ch {
 	DMACH_MAX		/* the end */
 };
 
-static __inline__ bool s3c_dma_has_circular(void)
+static inline bool samsung_dma_has_circular(void)
 {
 	return true;
 }
diff --git a/arch/arm/plat-samsung/include/plat/dma-pl330.h b/arch/arm/plat-samsung/include/plat/dma-pl330.h
index 9a1dadb0218..2e55e595867 100644
--- a/arch/arm/plat-samsung/include/plat/dma-pl330.h
+++ b/arch/arm/plat-samsung/include/plat/dma-pl330.h
@@ -89,7 +89,7 @@ struct s3c2410_dma_client {
 	char	*name;
 };
 
-static inline bool s3c_dma_has_circular(void)
+static inline bool samsung_dma_has_circular(void)
 {
 	return true;
 }
-- 
cgit v1.2.3-18-g5258


From 51ddf31da16b1ab9da861eafedad6d263faf4388 Mon Sep 17 00:00:00 2001
From: Boojin Kim <boojin.kim@samsung.com>
Date: Fri, 2 Sep 2011 09:44:44 +0900
Subject: ARM: SAMSUNG: Remove Samsung specific enum type for dma direction

This patch removes the samsung specific enum type 's3c2410_dmasrc'
and uses 'dma_data_direction' instead.

Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 arch/arm/mach-s3c2410/include/mach/dma.h         |  2 +-
 arch/arm/mach-s3c2412/dma.c                      |  4 ++--
 arch/arm/mach-s3c64xx/dma.c                      | 10 +++++-----
 arch/arm/mach-s3c64xx/include/mach/dma.h         |  2 +-
 arch/arm/plat-s3c24xx/dma.c                      | 10 +++++-----
 arch/arm/plat-samsung/include/plat/dma-s3c24xx.h |  2 +-
 arch/arm/plat-samsung/include/plat/dma.h         |  9 +++------
 arch/arm/plat-samsung/s3c-dma-ops.c              |  5 +----
 8 files changed, 19 insertions(+), 25 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
index 4e485bab66d..ae8e482b642 100644
--- a/arch/arm/mach-s3c2410/include/mach/dma.h
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -174,7 +174,7 @@ struct s3c2410_dma_chan {
 	struct s3c2410_dma_client *client;
 
 	/* channel configuration */
-	enum s3c2410_dmasrc	 source;
+	enum dma_data_direction	 source;
 	enum dma_ch		 req_ch;
 	unsigned long		 dev_addr;
 	unsigned long		 load_timeout;
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index 7abecfca0b7..b4fc3ba367d 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -148,11 +148,11 @@ static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = {
 
 static void s3c2412_dma_direction(struct s3c2410_dma_chan *chan,
 				  struct s3c24xx_dma_map *map,
-				  enum s3c2410_dmasrc dir)
+				  enum dma_data_direction dir)
 {
 	unsigned long chsel;
 
-	if (dir == S3C2410_DMASRC_HW)
+	if (dir == DMA_FROM_DEVICE)
 		chsel = map->channels_rx[0];
 	else
 		chsel = map->channels[0];
diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
index 204bfafe4bf..67c97fab62f 100644
--- a/arch/arm/mach-s3c64xx/dma.c
+++ b/arch/arm/mach-s3c64xx/dma.c
@@ -147,14 +147,14 @@ static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan,
 	u32 control0, control1;
 
 	switch (chan->source) {
-	case S3C2410_DMASRC_HW:
+	case DMA_FROM_DEVICE:
 		src = chan->dev_addr;
 		dst = data;
 		control0 = PL080_CONTROL_SRC_AHB2;
 		control0 |= PL080_CONTROL_DST_INCR;
 		break;
 
-	case S3C2410_DMASRC_MEM:
+	case DMA_TO_DEVICE:
 		src = data;
 		dst = chan->dev_addr;
 		control0 = PL080_CONTROL_DST_AHB2;
@@ -416,7 +416,7 @@ EXPORT_SYMBOL(s3c2410_dma_enqueue);
 
 
 int s3c2410_dma_devconfig(enum dma_ch channel,
-			  enum s3c2410_dmasrc source,
+			  enum dma_data_direction source,
 			  unsigned long devaddr)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
@@ -437,11 +437,11 @@ int s3c2410_dma_devconfig(enum dma_ch channel,
 	pr_debug("%s: peripheral %d\n", __func__, peripheral);
 
 	switch (source) {
-	case S3C2410_DMASRC_HW:
+	case DMA_FROM_DEVICE:
 		config = 2 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
 		config |= peripheral << PL080_CONFIG_SRC_SEL_SHIFT;
 		break;
-	case S3C2410_DMASRC_MEM:
+	case DMA_TO_DEVICE:
 		config = 1 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
 		config |= peripheral << PL080_CONFIG_DST_SEL_SHIFT;
 		break;
diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h
index 74fdf25c904..fe1a98cf0e4 100644
--- a/arch/arm/mach-s3c64xx/include/mach/dma.h
+++ b/arch/arm/mach-s3c64xx/include/mach/dma.h
@@ -99,7 +99,7 @@ struct s3c2410_dma_chan {
 	unsigned char		 peripheral;
 
 	unsigned int		 flags;
-	enum s3c2410_dmasrc	 source;
+	enum dma_data_direction	 source;
 
 
 	dma_addr_t		dev_addr;
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 539bd0e3def..53754bcf15a 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -1094,14 +1094,14 @@ EXPORT_SYMBOL(s3c2410_dma_config);
  *
  * configure the dma source/destination hardware type and address
  *
- * source:    S3C2410_DMASRC_HW: source is hardware
- *            S3C2410_DMASRC_MEM: source is memory
+ * source:    DMA_FROM_DEVICE: source is hardware
+ *            DMA_TO_DEVICE: source is memory
  *
  * devaddr:   physical address of the source
 */
 
 int s3c2410_dma_devconfig(enum dma_ch channel,
-			  enum s3c2410_dmasrc source,
+			  enum dma_data_direction source,
 			  unsigned long devaddr)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
@@ -1131,7 +1131,7 @@ int s3c2410_dma_devconfig(enum dma_ch channel,
 	 hwcfg |= S3C2410_DISRCC_INC;
 
 	switch (source) {
-	case S3C2410_DMASRC_HW:
+	case DMA_FROM_DEVICE:
 		/* source is hardware */
 		pr_debug("%s: hw source, devaddr=%08lx, hwcfg=%d\n",
 			 __func__, devaddr, hwcfg);
@@ -1142,7 +1142,7 @@ int s3c2410_dma_devconfig(enum dma_ch channel,
 		chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DIDST);
 		break;
 
-	case S3C2410_DMASRC_MEM:
+	case DMA_TO_DEVICE:
 		/* source is memory */
 		pr_debug("%s: mem source, devaddr=%08lx, hwcfg=%d\n",
 			 __func__, devaddr, hwcfg);
diff --git a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
index 336d5ac0203..19828296a56 100644
--- a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
+++ b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
@@ -47,7 +47,7 @@ struct s3c24xx_dma_selection {
 
 	void	(*direction)(struct s3c2410_dma_chan *chan,
 			     struct s3c24xx_dma_map *map,
-			     enum s3c2410_dmasrc dir);
+			     enum dma_data_direction dir);
 };
 
 extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
diff --git a/arch/arm/plat-samsung/include/plat/dma.h b/arch/arm/plat-samsung/include/plat/dma.h
index 36107606074..b9061128abd 100644
--- a/arch/arm/plat-samsung/include/plat/dma.h
+++ b/arch/arm/plat-samsung/include/plat/dma.h
@@ -10,17 +10,14 @@
  * published by the Free Software Foundation.
 */
 
+#include <linux/dma-mapping.h>
+
 enum s3c2410_dma_buffresult {
 	S3C2410_RES_OK,
 	S3C2410_RES_ERR,
 	S3C2410_RES_ABORT
 };
 
-enum s3c2410_dmasrc {
-	S3C2410_DMASRC_HW,		/* source is memory */
-	S3C2410_DMASRC_MEM		/* source is hardware */
-};
-
 /* enum s3c2410_chan_op
  *
  * operation codes passed to the DMA code by the user, and also used
@@ -112,7 +109,7 @@ extern int s3c2410_dma_config(enum dma_ch channel, int xferunit);
 */
 
 extern int s3c2410_dma_devconfig(enum dma_ch channel,
-		enum s3c2410_dmasrc source, unsigned long devaddr);
+		enum dma_data_direction source, unsigned long devaddr);
 
 /* s3c2410_dma_getposition
  *
diff --git a/arch/arm/plat-samsung/s3c-dma-ops.c b/arch/arm/plat-samsung/s3c-dma-ops.c
index 33ab3241268..582333c7058 100644
--- a/arch/arm/plat-samsung/s3c-dma-ops.c
+++ b/arch/arm/plat-samsung/s3c-dma-ops.c
@@ -48,10 +48,7 @@ static unsigned s3c_dma_request(enum dma_ch dma_ch,
 	data->ch = dma_ch;
 	list_add_tail(&data->node, &dma_list);
 
-	if (info->direction == DMA_FROM_DEVICE)
-		s3c2410_dma_devconfig(dma_ch, S3C2410_DMASRC_HW, info->fifo);
-	else
-		s3c2410_dma_devconfig(dma_ch, S3C2410_DMASRC_MEM, info->fifo);
+	s3c2410_dma_devconfig(dma_ch, info->direction, info->fifo);
 
 	if (info->cap == DMA_CYCLIC)
 		s3c2410_dma_setflags(dma_ch, S3C2410_DMAF_CIRCULAR);
-- 
cgit v1.2.3-18-g5258


From 72cc205611879525db0374d9831f84f787112b25 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nicolas.pitre@linaro.org>
Date: Wed, 14 Sep 2011 01:22:05 -0400
Subject: ARM: Dove: fix second SPI initialization call

Commit 980f9f601a "ARM: orion: Consolidate SPI initialization."
broke it by overwriting the SPI0 registration.

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: <stable@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/mach-dove/common.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index 83dce859886..a9e0dae86a2 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -158,7 +158,7 @@ void __init dove_spi0_init(void)
 
 void __init dove_spi1_init(void)
 {
-	orion_spi_init(DOVE_SPI1_PHYS_BASE, get_tclk());
+	orion_spi_1_init(DOVE_SPI1_PHYS_BASE, get_tclk());
 }
 
 /*****************************************************************************
-- 
cgit v1.2.3-18-g5258


From e5f0bdc7840bdb791247cb98dfc1dab6ea6c7da4 Mon Sep 17 00:00:00 2001
From: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Date: Wed, 14 Sep 2011 16:21:08 -0700
Subject: um: disable CMPXCHG_DOUBLE as it breaks UML build

Commit b789ef518b2 ("slub: Add cmpxchg_double_slab()") tests for
cmpxchg_double support in the SLUB code and it breaks UML builds with
SLUB.  Since UML does not support checking for CPU features, disable
CMPXCHG_DOUBLE just like CMPXCHG_LOCAL is disabled for UML.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/um/Kconfig.x86 | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/um/Kconfig.x86 b/arch/um/Kconfig.x86
index d31ecf346b4..21bebe63df6 100644
--- a/arch/um/Kconfig.x86
+++ b/arch/um/Kconfig.x86
@@ -10,6 +10,10 @@ config CMPXCHG_LOCAL
 	bool
 	default n
 
+config CMPXCHG_DOUBLE
+	bool
+	default n
+
 source "arch/x86/Kconfig.cpu"
 
 endmenu
-- 
cgit v1.2.3-18-g5258


From b40997b872cdb70140f127af6069f00a86b6cf81 Mon Sep 17 00:00:00 2001
From: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Date: Wed, 14 Sep 2011 16:21:20 -0700
Subject: um: drivers/xterm.c: fix a file descriptor leak
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

I could use out_close1, but that seems to be the code path to close the fd
returned by os_create_unix_socket, and using it to close the fd returned
by mkstemp might lead to some confusion, so I don't do it.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/um/drivers/xterm.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/um/drivers/xterm.c b/arch/um/drivers/xterm.c
index 8ac7146c237..2e1de572860 100644
--- a/arch/um/drivers/xterm.c
+++ b/arch/um/drivers/xterm.c
@@ -123,6 +123,7 @@ static int xterm_open(int input, int output, int primary, void *d,
 		err = -errno;
 		printk(UM_KERN_ERR "xterm_open : unlink failed, errno = %d\n",
 		       errno);
+		close(fd);
 		return err;
 	}
 	close(fd);
-- 
cgit v1.2.3-18-g5258


From fbfe9c847edf57ac8232aeafb290f272289893a3 Mon Sep 17 00:00:00 2001
From: Ingo van Lil <inguin@gmx.de>
Date: Wed, 14 Sep 2011 16:21:23 -0700
Subject: um: Save FPU registers between task switches

Some time ago Jeff prepared 42daba316557 ("uml: stop saving process FP
state") for UML to stop saving the process FP state between task
switches.  The assumption was that since with SKAS0 every guest process
runs inside a host process context the host OS will take care of keeping
the proper FP state.

Unfortunately this is not true for multi-threaded applications, where
all guest threads share a single host process context yet all may use
the FPU on their own.  Although I haven't verified it I suspect things
to be even worse in SKAS3 mode where all guest processes run inside a
single host process.

The patch reintroduces the saving and restoring of the FP context
between task switches.

[richard@nod.at: Ingo posted this patch in 2009, sadly it was never applied
and got lost. Now in 2011 the problem was reported by Gunnar.]

Signed-off-by: Ingo van Lil <inguin@gmx.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
Reported-by: <gunnarlindroth@hotmail.com>
Tested-by: <gunnarlindroth@hotmail.com>
Cc: Stanislav Meduna <stano@meduna.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/um/include/shared/registers.h        |  2 +-
 arch/um/kernel/process.c                  |  2 +-
 arch/um/os-Linux/registers.c              |  9 ++++++++-
 arch/um/os-Linux/skas/mem.c               |  2 +-
 arch/um/os-Linux/skas/process.c           | 19 ++++++++++++++++++-
 arch/um/sys-i386/shared/sysdep/ptrace.h   |  1 +
 arch/um/sys-x86_64/shared/sysdep/ptrace.h |  1 +
 7 files changed, 31 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/um/include/shared/registers.h b/arch/um/include/shared/registers.h
index b0b4589e0eb..f1e0aa56c52 100644
--- a/arch/um/include/shared/registers.h
+++ b/arch/um/include/shared/registers.h
@@ -16,7 +16,7 @@ extern int restore_fpx_registers(int pid, unsigned long *fp_regs);
 extern int save_registers(int pid, struct uml_pt_regs *regs);
 extern int restore_registers(int pid, struct uml_pt_regs *regs);
 extern int init_registers(int pid);
-extern void get_safe_registers(unsigned long *regs);
+extern void get_safe_registers(unsigned long *regs, unsigned long *fp_regs);
 extern unsigned long get_thread_reg(int reg, jmp_buf *buf);
 extern int get_fp_registers(int pid, unsigned long *regs);
 extern int put_fp_registers(int pid, unsigned long *regs);
diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c
index fab4371184f..21c1ae7c3d7 100644
--- a/arch/um/kernel/process.c
+++ b/arch/um/kernel/process.c
@@ -202,7 +202,7 @@ int copy_thread(unsigned long clone_flags, unsigned long sp,
 		arch_copy_thread(&current->thread.arch, &p->thread.arch);
 	}
 	else {
-		get_safe_registers(p->thread.regs.regs.gp);
+		get_safe_registers(p->thread.regs.regs.gp, p->thread.regs.regs.fp);
 		p->thread.request.u.thread = current->thread.request.u.thread;
 		handler = new_thread_handler;
 	}
diff --git a/arch/um/os-Linux/registers.c b/arch/um/os-Linux/registers.c
index 830fe6a1518..b866b9e3bef 100644
--- a/arch/um/os-Linux/registers.c
+++ b/arch/um/os-Linux/registers.c
@@ -8,6 +8,8 @@
 #include <string.h>
 #include <sys/ptrace.h>
 #include "sysdep/ptrace.h"
+#include "sysdep/ptrace_user.h"
+#include "registers.h"
 
 int save_registers(int pid, struct uml_pt_regs *regs)
 {
@@ -32,6 +34,7 @@ int restore_registers(int pid, struct uml_pt_regs *regs)
 /* This is set once at boot time and not changed thereafter */
 
 static unsigned long exec_regs[MAX_REG_NR];
+static unsigned long exec_fp_regs[FP_SIZE];
 
 int init_registers(int pid)
 {
@@ -42,10 +45,14 @@ int init_registers(int pid)
 		return -errno;
 
 	arch_init_registers(pid);
+	get_fp_registers(pid, exec_fp_regs);
 	return 0;
 }
 
-void get_safe_registers(unsigned long *regs)
+void get_safe_registers(unsigned long *regs, unsigned long *fp_regs)
 {
 	memcpy(regs, exec_regs, sizeof(exec_regs));
+
+	if (fp_regs)
+		memcpy(fp_regs, exec_fp_regs, sizeof(exec_fp_regs));
 }
diff --git a/arch/um/os-Linux/skas/mem.c b/arch/um/os-Linux/skas/mem.c
index d261f170d12..e771398be5f 100644
--- a/arch/um/os-Linux/skas/mem.c
+++ b/arch/um/os-Linux/skas/mem.c
@@ -39,7 +39,7 @@ static unsigned long syscall_regs[MAX_REG_NR];
 
 static int __init init_syscall_regs(void)
 {
-	get_safe_registers(syscall_regs);
+	get_safe_registers(syscall_regs, NULL);
 	syscall_regs[REGS_IP_INDEX] = STUB_CODE +
 		((unsigned long) &batch_syscall_stub -
 		 (unsigned long) &__syscall_stub_start);
diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c
index d6e0a2234b8..dee0e8cf8ad 100644
--- a/arch/um/os-Linux/skas/process.c
+++ b/arch/um/os-Linux/skas/process.c
@@ -373,6 +373,9 @@ void userspace(struct uml_pt_regs *regs)
 		if (ptrace(PTRACE_SETREGS, pid, 0, regs->gp))
 			fatal_sigsegv();
 
+		if (put_fp_registers(pid, regs->fp))
+			fatal_sigsegv();
+
 		/* Now we set local_using_sysemu to be used for one loop */
 		local_using_sysemu = get_using_sysemu();
 
@@ -399,6 +402,12 @@ void userspace(struct uml_pt_regs *regs)
 			fatal_sigsegv();
 		}
 
+		if (get_fp_registers(pid, regs->fp)) {
+			printk(UM_KERN_ERR "userspace -  get_fp_registers failed, "
+			       "errno = %d\n", errno);
+			fatal_sigsegv();
+		}
+
 		UPT_SYSCALL_NR(regs) = -1; /* Assume: It's not a syscall */
 
 		if (WIFSTOPPED(status)) {
@@ -457,10 +466,11 @@ void userspace(struct uml_pt_regs *regs)
 }
 
 static unsigned long thread_regs[MAX_REG_NR];
+static unsigned long thread_fp_regs[FP_SIZE];
 
 static int __init init_thread_regs(void)
 {
-	get_safe_registers(thread_regs);
+	get_safe_registers(thread_regs, thread_fp_regs);
 	/* Set parent's instruction pointer to start of clone-stub */
 	thread_regs[REGS_IP_INDEX] = STUB_CODE +
 				(unsigned long) stub_clone_handler -
@@ -503,6 +513,13 @@ int copy_context_skas0(unsigned long new_stack, int pid)
 		return err;
 	}
 
+	err = put_fp_registers(pid, thread_fp_regs);
+	if (err < 0) {
+		printk(UM_KERN_ERR "copy_context_skas0 : put_fp_registers "
+		       "failed, pid = %d, err = %d\n", pid, err);
+		return err;
+	}
+
 	/* set a well known return code for detection of child write failure */
 	child_data->err = 12345678;
 
diff --git a/arch/um/sys-i386/shared/sysdep/ptrace.h b/arch/um/sys-i386/shared/sysdep/ptrace.h
index d50e62e0707..c398a507611 100644
--- a/arch/um/sys-i386/shared/sysdep/ptrace.h
+++ b/arch/um/sys-i386/shared/sysdep/ptrace.h
@@ -53,6 +53,7 @@ extern int sysemu_supported;
 
 struct uml_pt_regs {
 	unsigned long gp[MAX_REG_NR];
+	unsigned long fp[HOST_FPX_SIZE];
 	struct faultinfo faultinfo;
 	long syscall;
 	int is_user;
diff --git a/arch/um/sys-x86_64/shared/sysdep/ptrace.h b/arch/um/sys-x86_64/shared/sysdep/ptrace.h
index fdba5457947..8ee8f8e12af 100644
--- a/arch/um/sys-x86_64/shared/sysdep/ptrace.h
+++ b/arch/um/sys-x86_64/shared/sysdep/ptrace.h
@@ -85,6 +85,7 @@
 
 struct uml_pt_regs {
 	unsigned long gp[MAX_REG_NR];
+	unsigned long fp[HOST_FP_SIZE];
 	struct faultinfo faultinfo;
 	long syscall;
 	int is_user;
-- 
cgit v1.2.3-18-g5258


From f71f94845e0126884eca8ce57a92e30b189c8e71 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@ftp.linux.org.uk>
Date: Wed, 14 Sep 2011 16:21:25 -0700
Subject: um: fix oopsable race in line_close()

tty->count is decremented only after ->close() had been called and
several tasks can hit it in parallel.  As the result, using tty->count
to check if you are the last one is broken.  We end up leaving line->tty
not reset to NULL and the next IRQ on that sucker will blow up trying to
dereference pointers from kfree'd struct tty.

Fix is obvious: we need to use a counter of our own.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/um/drivers/line.c        | 25 ++++++++++++-------------
 arch/um/include/shared/line.h |  1 +
 2 files changed, 13 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index d51c404239a..c5bff1ddeab 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -399,8 +399,8 @@ int line_setup_irq(int fd, int input, int output, struct line *line, void *data)
  * is done under a spinlock.  Checking whether the device is in use is
  * line->tty->count > 1, also under the spinlock.
  *
- * tty->count serves to decide whether the device should be enabled or
- * disabled on the host.  If it's equal to 1, then we are doing the
+ * line->count serves to decide whether the device should be enabled or
+ * disabled on the host.  If it's equal to 0, then we are doing the
  * first open or last close.  Otherwise, open and close just return.
  */
 
@@ -414,16 +414,16 @@ int line_open(struct line *lines, struct tty_struct *tty)
 		goto out_unlock;
 
 	err = 0;
-	if (tty->count > 1)
+	if (line->count++)
 		goto out_unlock;
 
-	spin_unlock(&line->count_lock);
-
+	BUG_ON(tty->driver_data);
 	tty->driver_data = line;
 	line->tty = tty;
 
+	spin_unlock(&line->count_lock);
 	err = enable_chan(line);
-	if (err)
+	if (err) /* line_close() will be called by our caller */
 		return err;
 
 	INIT_DELAYED_WORK(&line->task, line_timer_cb);
@@ -436,7 +436,7 @@ int line_open(struct line *lines, struct tty_struct *tty)
 	chan_window_size(&line->chan_list, &tty->winsize.ws_row,
 			 &tty->winsize.ws_col);
 
-	return err;
+	return 0;
 
 out_unlock:
 	spin_unlock(&line->count_lock);
@@ -460,17 +460,16 @@ void line_close(struct tty_struct *tty, struct file * filp)
 	flush_buffer(line);
 
 	spin_lock(&line->count_lock);
-	if (!line->valid)
-		goto out_unlock;
+	BUG_ON(!line->valid);
 
-	if (tty->count > 1)
+	if (--line->count)
 		goto out_unlock;
 
-	spin_unlock(&line->count_lock);
-
 	line->tty = NULL;
 	tty->driver_data = NULL;
 
+	spin_unlock(&line->count_lock);
+
 	if (line->sigio) {
 		unregister_winch(tty);
 		line->sigio = 0;
@@ -498,7 +497,7 @@ static int setup_one_line(struct line *lines, int n, char *init, int init_prio,
 
 	spin_lock(&line->count_lock);
 
-	if (line->tty != NULL) {
+	if (line->count) {
 		*error_out = "Device is already open";
 		goto out;
 	}
diff --git a/arch/um/include/shared/line.h b/arch/um/include/shared/line.h
index 72f4f25af24..63df3ca02ac 100644
--- a/arch/um/include/shared/line.h
+++ b/arch/um/include/shared/line.h
@@ -33,6 +33,7 @@ struct line_driver {
 struct line {
 	struct tty_struct *tty;
 	spinlock_t count_lock;
+	unsigned long count;
 	int valid;
 
 	char *init_str;
-- 
cgit v1.2.3-18-g5258


From 45cd5e2d4e632f55af1d6131f33b554c98f8b929 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@ftp.linux.org.uk>
Date: Wed, 14 Sep 2011 16:21:28 -0700
Subject: um: winch_interrupt() can happen inside of free_winch()

...  so set winch->fd to -1 before doing free_irq(), to avoid having
winch_interrupt() come from/during the latter and attempt to do
reactivate_fd() on something that's already gone.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/um/drivers/line.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index c5bff1ddeab..91bf18941ca 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -725,6 +725,8 @@ struct winch {
 
 static void free_winch(struct winch *winch, int free_irq_ok)
 {
+	int fd = winch->fd;
+	winch->fd = -1;
 	if (free_irq_ok)
 		free_irq(WINCH_IRQ, winch);
 
@@ -732,8 +734,8 @@ static void free_winch(struct winch *winch, int free_irq_ok)
 
 	if (winch->pid != -1)
 		os_kill_process(winch->pid, 1);
-	if (winch->fd != -1)
-		os_close_file(winch->fd);
+	if (fd != -1)
+		os_close_file(fd);
 	if (winch->stack != 0)
 		free_stack(winch->stack, 0);
 	kfree(winch);
-- 
cgit v1.2.3-18-g5258


From 7cf3cf21aac7d75d27e8e7cd039bd33d19fb300d Mon Sep 17 00:00:00 2001
From: Al Viro <viro@ftp.linux.org.uk>
Date: Wed, 14 Sep 2011 16:21:31 -0700
Subject: um: fix free_winch() mess

while not doing free_irq() from irq handler is commendable, kfree() on the
data passed to said handler before free_irq() is Not Good(tm).  Freeing
the stack it's being run on is also not nice...  Solution: delay actually
freeing stuff.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/um/drivers/line.c | 38 ++++++++++++++++++++++++--------------
 1 file changed, 24 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index 91bf18941ca..364c8a15c4c 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -721,43 +721,53 @@ struct winch {
 	int pid;
 	struct tty_struct *tty;
 	unsigned long stack;
+	struct work_struct work;
 };
 
-static void free_winch(struct winch *winch, int free_irq_ok)
+static void __free_winch(struct work_struct *work)
 {
-	int fd = winch->fd;
-	winch->fd = -1;
-	if (free_irq_ok)
-		free_irq(WINCH_IRQ, winch);
-
-	list_del(&winch->list);
+	struct winch *winch = container_of(work, struct winch, work);
+	free_irq(WINCH_IRQ, winch);
 
 	if (winch->pid != -1)
 		os_kill_process(winch->pid, 1);
-	if (fd != -1)
-		os_close_file(fd);
 	if (winch->stack != 0)
 		free_stack(winch->stack, 0);
 	kfree(winch);
 }
 
+static void free_winch(struct winch *winch)
+{
+	int fd = winch->fd;
+	winch->fd = -1;
+	if (fd != -1)
+		os_close_file(fd);
+	list_del(&winch->list);
+	__free_winch(&winch->work);
+}
+
 static irqreturn_t winch_interrupt(int irq, void *data)
 {
 	struct winch *winch = data;
 	struct tty_struct *tty;
 	struct line *line;
+	int fd = winch->fd;
 	int err;
 	char c;
 
-	if (winch->fd != -1) {
-		err = generic_read(winch->fd, &c, NULL);
+	if (fd != -1) {
+		err = generic_read(fd, &c, NULL);
 		if (err < 0) {
 			if (err != -EAGAIN) {
+				winch->fd = -1;
+				list_del(&winch->list);
+				os_close_file(fd);
 				printk(KERN_ERR "winch_interrupt : "
 				       "read failed, errno = %d\n", -err);
 				printk(KERN_ERR "fd %d is losing SIGWINCH "
 				       "support\n", winch->tty_fd);
-				free_winch(winch, 0);
+				INIT_WORK(&winch->work, __free_winch);
+				schedule_work(&winch->work);
 				return IRQ_HANDLED;
 			}
 			goto out;
@@ -829,7 +839,7 @@ static void unregister_winch(struct tty_struct *tty)
 	list_for_each_safe(ele, next, &winch_handlers) {
 		winch = list_entry(ele, struct winch, list);
 		if (winch->tty == tty) {
-			free_winch(winch, 1);
+			free_winch(winch);
 			break;
 		}
 	}
@@ -845,7 +855,7 @@ static void winch_cleanup(void)
 
 	list_for_each_safe(ele, next, &winch_handlers) {
 		winch = list_entry(ele, struct winch, list);
-		free_winch(winch, 1);
+		free_winch(winch);
 	}
 
 	spin_unlock(&winch_handler_lock);
-- 
cgit v1.2.3-18-g5258


From 01599cdc2f891415387aed9921909b3e9f27c801 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@ftp.linux.org.uk>
Date: Wed, 14 Sep 2011 16:21:34 -0700
Subject: um: PTRACE_[GS]ETFPXREGS had been wired on the wrong subarch

It's 32bit-only, not 64bit-only...  And while we are at it, it's
set_fpxregs(), not set_fpregs()...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/um/sys-i386/ptrace.c   | 14 +++++++++++++-
 arch/um/sys-x86_64/ptrace.c | 14 +-------------
 2 files changed, 14 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/um/sys-i386/ptrace.c b/arch/um/sys-i386/ptrace.c
index d23b2d3ea38..49fd25a5f20 100644
--- a/arch/um/sys-i386/ptrace.c
+++ b/arch/um/sys-i386/ptrace.c
@@ -206,5 +206,17 @@ int set_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
 long subarch_ptrace(struct task_struct *child, long request,
 		    unsigned long addr, unsigned long data)
 {
-	return -EIO;
+	int ret = -EIO;
+	void __user *datap = (void __user *) data;
+
+	switch (request) {
+	case PTRACE_GETFPXREGS: /* Get the child FPU state. */
+		ret = get_fpxregs(datap, child);
+		break;
+	case PTRACE_SETFPXREGS: /* Set the child FPU state. */
+		ret = set_fpxregs(datap, child);
+		break;
+	}
+
+	return ret;
 }
diff --git a/arch/um/sys-x86_64/ptrace.c b/arch/um/sys-x86_64/ptrace.c
index f43613643cd..7ed49ac78f8 100644
--- a/arch/um/sys-x86_64/ptrace.c
+++ b/arch/um/sys-x86_64/ptrace.c
@@ -178,17 +178,5 @@ int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
 long subarch_ptrace(struct task_struct *child, long request,
 		    unsigned long addr, unsigned long data)
 {
-	int ret = -EIO;
-	void __user *datap = (void __user *) data;
-
-	switch (request) {
-	case PTRACE_GETFPXREGS: /* Get the child FPU state. */
-		ret = get_fpregs(datap, child);
-		break;
-	case PTRACE_SETFPXREGS: /* Set the child FPU state. */
-		ret = set_fpregs(datap, child);
-		break;
-	}
-
-	return ret;
+	return -EIO;
 }
-- 
cgit v1.2.3-18-g5258


From f2833aef6a0517e933992c8007f330d0df5d9317 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@ftp.linux.org.uk>
Date: Wed, 14 Sep 2011 16:21:37 -0700
Subject: um: clean arch_ptrace() up a bit

1) take subarch-specific stuff to subarch_ptrace()
2) PTRACE_{PEEK,POKE}{TEXT,DATA} is handled by ptrace_request() just fine...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/um/include/asm/ptrace-generic.h |  4 ----
 arch/um/kernel/ptrace.c              | 28 ----------------------------
 arch/um/sys-i386/asm/ptrace.h        |  5 -----
 arch/um/sys-i386/ptrace.c            | 18 ++++++++++++------
 arch/um/sys-x86_64/ptrace.c          | 22 +++++++++++++++++++---
 5 files changed, 31 insertions(+), 46 deletions(-)

(limited to 'arch')

diff --git a/arch/um/include/asm/ptrace-generic.h b/arch/um/include/asm/ptrace-generic.h
index ae084ad1a3a..1a7d2757fe0 100644
--- a/arch/um/include/asm/ptrace-generic.h
+++ b/arch/um/include/asm/ptrace-generic.h
@@ -42,10 +42,6 @@ extern long subarch_ptrace(struct task_struct *child, long request,
 	unsigned long addr, unsigned long data);
 extern unsigned long getreg(struct task_struct *child, int regno);
 extern int putreg(struct task_struct *child, int regno, unsigned long value);
-extern int get_fpregs(struct user_i387_struct __user *buf,
-		      struct task_struct *child);
-extern int set_fpregs(struct user_i387_struct __user *buf,
-		      struct task_struct *child);
 
 extern int arch_copy_tls(struct task_struct *new);
 extern void clear_flushed_tls(struct task_struct *task);
diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c
index 701b672c112..c9da32b0c70 100644
--- a/arch/um/kernel/ptrace.c
+++ b/arch/um/kernel/ptrace.c
@@ -50,23 +50,11 @@ long arch_ptrace(struct task_struct *child, long request,
 	void __user *vp = p;
 
 	switch (request) {
-	/* read word at location addr. */
-	case PTRACE_PEEKTEXT:
-	case PTRACE_PEEKDATA:
-		ret = generic_ptrace_peekdata(child, addr, data);
-		break;
-
 	/* read the word at location addr in the USER area. */
 	case PTRACE_PEEKUSR:
 		ret = peek_user(child, addr, data);
 		break;
 
-	/* write the word at location addr. */
-	case PTRACE_POKETEXT:
-	case PTRACE_POKEDATA:
-		ret = generic_ptrace_pokedata(child, addr, data);
-		break;
-
 	/* write the word at location addr in the USER area */
 	case PTRACE_POKEUSR:
 		ret = poke_user(child, addr, data);
@@ -106,16 +94,6 @@ long arch_ptrace(struct task_struct *child, long request,
 		ret = 0;
 		break;
 	}
-#endif
-#ifdef PTRACE_GETFPREGS
-	case PTRACE_GETFPREGS: /* Get the child FPU state. */
-		ret = get_fpregs(vp, child);
-		break;
-#endif
-#ifdef PTRACE_SETFPREGS
-	case PTRACE_SETFPREGS: /* Set the child FPU state. */
-		ret = set_fpregs(vp, child);
-		break;
 #endif
 	case PTRACE_GET_THREAD_AREA:
 		ret = ptrace_get_thread_area(child, addr, vp);
@@ -153,12 +131,6 @@ long arch_ptrace(struct task_struct *child, long request,
 		ret = -EIO;
 		break;
 	}
-#endif
-#ifdef PTRACE_ARCH_PRCTL
-	case PTRACE_ARCH_PRCTL:
-		/* XXX Calls ptrace on the host - needs some SMP thinking */
-		ret = arch_prctl(child, data, (void __user *) addr);
-		break;
 #endif
 	default:
 		ret = ptrace_request(child, request, addr, data);
diff --git a/arch/um/sys-i386/asm/ptrace.h b/arch/um/sys-i386/asm/ptrace.h
index 0273e4d09af..5d2a5911253 100644
--- a/arch/um/sys-i386/asm/ptrace.h
+++ b/arch/um/sys-i386/asm/ptrace.h
@@ -42,11 +42,6 @@
  */
 struct user_desc;
 
-extern int get_fpxregs(struct user_fxsr_struct __user *buf,
-		       struct task_struct *child);
-extern int set_fpxregs(struct user_fxsr_struct __user *buf,
-		       struct task_struct *tsk);
-
 extern int ptrace_get_thread_area(struct task_struct *child, int idx,
                                   struct user_desc __user *user_desc);
 
diff --git a/arch/um/sys-i386/ptrace.c b/arch/um/sys-i386/ptrace.c
index 49fd25a5f20..3375c271785 100644
--- a/arch/um/sys-i386/ptrace.c
+++ b/arch/um/sys-i386/ptrace.c
@@ -145,7 +145,7 @@ int peek_user(struct task_struct *child, long addr, long data)
 	return put_user(tmp, (unsigned long __user *) data);
 }
 
-int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
+static int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
 {
 	int err, n, cpu = ((struct thread_info *) child->stack)->cpu;
 	struct user_i387_struct fpregs;
@@ -161,7 +161,7 @@ int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
 	return n;
 }
 
-int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
+static int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
 {
 	int n, cpu = ((struct thread_info *) child->stack)->cpu;
 	struct user_i387_struct fpregs;
@@ -174,7 +174,7 @@ int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
 				    (unsigned long *) &fpregs);
 }
 
-int get_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
+static int get_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
 {
 	int err, n, cpu = ((struct thread_info *) child->stack)->cpu;
 	struct user_fxsr_struct fpregs;
@@ -190,7 +190,7 @@ int get_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
 	return n;
 }
 
-int set_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
+static int set_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
 {
 	int n, cpu = ((struct thread_info *) child->stack)->cpu;
 	struct user_fxsr_struct fpregs;
@@ -208,15 +208,21 @@ long subarch_ptrace(struct task_struct *child, long request,
 {
 	int ret = -EIO;
 	void __user *datap = (void __user *) data;
-
 	switch (request) {
+	case PTRACE_GETFPREGS: /* Get the child FPU state. */
+		ret = get_fpregs(datap, child);
+		break;
+	case PTRACE_SETFPREGS: /* Set the child FPU state. */
+		ret = set_fpregs(datap, child);
+		break;
 	case PTRACE_GETFPXREGS: /* Get the child FPU state. */
 		ret = get_fpxregs(datap, child);
 		break;
 	case PTRACE_SETFPXREGS: /* Set the child FPU state. */
 		ret = set_fpxregs(datap, child);
 		break;
+	default:
+		ret = -EIO;
 	}
-
 	return ret;
 }
diff --git a/arch/um/sys-x86_64/ptrace.c b/arch/um/sys-x86_64/ptrace.c
index 7ed49ac78f8..4005506834f 100644
--- a/arch/um/sys-x86_64/ptrace.c
+++ b/arch/um/sys-x86_64/ptrace.c
@@ -145,7 +145,7 @@ int is_syscall(unsigned long addr)
 	return instr == 0x050f;
 }
 
-int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
+static int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
 {
 	int err, n, cpu = ((struct thread_info *) child->stack)->cpu;
 	long fpregs[HOST_FP_SIZE];
@@ -162,7 +162,7 @@ int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
 	return n;
 }
 
-int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
+static int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
 {
 	int n, cpu = ((struct thread_info *) child->stack)->cpu;
 	long fpregs[HOST_FP_SIZE];
@@ -178,5 +178,21 @@ int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
 long subarch_ptrace(struct task_struct *child, long request,
 		    unsigned long addr, unsigned long data)
 {
-	return -EIO;
+	int ret = -EIO;
+	void __user *datap = (void __user *) data;
+
+	switch (request) {
+	case PTRACE_GETFPREGS: /* Get the child FPU state. */
+		ret = get_fpregs(datap, child);
+		break;
+	case PTRACE_SETFPREGS: /* Set the child FPU state. */
+		ret = set_fpregs(datap, child);
+		break;
+	case PTRACE_ARCH_PRCTL:
+		/* XXX Calls ptrace on the host - needs some SMP thinking */
+		ret = arch_prctl(child, data, (void __user *) addr);
+		break;
+	}
+
+	return ret;
 }
-- 
cgit v1.2.3-18-g5258


From 2c51a4bc0233487db81706a0189715a59b18e9d6 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@ftp.linux.org.uk>
Date: Wed, 14 Sep 2011 16:21:38 -0700
Subject: um: fix strrchr() problems

richard@nod.at:
Fixes:
  /usr/lib/gcc/x86_64-linux-gnu/4.4.5/../../../../lib/libc.a(strrchr.o): In function `rindex':
  (.text+0x0): multiple definition of `strrchr'

If both STATIC_LINK and UML_NET_VDE are set to "y" libc's strrchr may
clash with the kernel implementation.

This workaround comes originally from Jeff Dike:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=494995#35

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/um/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/um/Makefile b/arch/um/Makefile
index fab8121d2b3..c0f712cc7c5 100644
--- a/arch/um/Makefile
+++ b/arch/um/Makefile
@@ -41,7 +41,7 @@ KBUILD_CPPFLAGS += -I$(srctree)/$(ARCH_DIR)/sys-$(SUBARCH)
 KBUILD_CFLAGS += $(CFLAGS) $(CFLAGS-y) -D__arch_um__ -DSUBARCH=\"$(SUBARCH)\" \
 	$(ARCH_INCLUDE) $(MODE_INCLUDE) -Dvmap=kernel_vmap	\
 	-Din6addr_loopback=kernel_in6addr_loopback \
-	-Din6addr_any=kernel_in6addr_any
+	-Din6addr_any=kernel_in6addr_any -Dstrrchr=kernel_strrchr
 
 KBUILD_AFLAGS += $(ARCH_INCLUDE)
 
-- 
cgit v1.2.3-18-g5258


From 8694a1840c71fc7835595ee69139c83f7a8e5543 Mon Sep 17 00:00:00 2001
From: Ben Hutchings <ben@decadent.org.uk>
Date: Wed, 14 Sep 2011 16:21:42 -0700
Subject: alpha, gpio: GENERIC_GPIO default must be n

Since GPIOLIB is optional on alpha, GENERIC_GPIO must not be selected by
default.  If GPIOLIB is enabled, it will select GENERIC_GPIO.

See <http://bugs.debian.org/638696> for an example of what 'def_bool y'
breaks.

Reported-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Cree <mcree@orcon.net.nz>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 60cde53d266..8bb936226de 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -51,7 +51,7 @@ config GENERIC_CMOS_UPDATE
         def_bool y
 
 config GENERIC_GPIO
-	def_bool y
+	bool
 
 config ZONE_DMA
 	bool
-- 
cgit v1.2.3-18-g5258


From 6861a197e2ed6dd05c0316ee2006730fbb6e7f9a Mon Sep 17 00:00:00 2001
From: Jonghwan Choi <jhbird.choi@samsung.com>
Date: Tue, 23 Aug 2011 16:27:17 +0900
Subject: ARM: EXYNOS4: Fix wrong pll type for vpll

The PLL4650C is used for VPLL on EXYNOS4 so should be fixed.

Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com>
[kgene.kim@samsung.com: added message]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/clock.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos4/clock.c
index 1561b036a9b..79d6cd0c8e7 100644
--- a/arch/arm/mach-exynos4/clock.c
+++ b/arch/arm/mach-exynos4/clock.c
@@ -1160,7 +1160,7 @@ void __init_or_cpufreq exynos4_setup_clocks(void)
 
 	vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
 	vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
-				__raw_readl(S5P_VPLL_CON1), pll_4650);
+				__raw_readl(S5P_VPLL_CON1), pll_4650c);
 
 	clk_fout_apll.ops = &exynos4_fout_apll_ops;
 	clk_fout_mpll.rate = mpll;
-- 
cgit v1.2.3-18-g5258


From 4d487d7ed46b9172664073dde324f55f9ab50f18 Mon Sep 17 00:00:00 2001
From: Kukjin Kim <kgene.kim@samsung.com>
Date: Wed, 24 Aug 2011 16:07:39 +0900
Subject: ARM: EXYNOS4: Fix return type of local_timer_setup()

According to commmit af90f10d ("ARM: 6759/1: smp: Select
local timers vs broadcast timer support"), the return type
of local_timer_setup() should be int instead of void.

Reported-by: Changhwan Youn <chaos.youn@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/mct.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c
index 1ae059b7ad7..f3638fa73e6 100644
--- a/arch/arm/mach-exynos4/mct.c
+++ b/arch/arm/mach-exynos4/mct.c
@@ -389,9 +389,11 @@ static void exynos4_mct_tick_init(struct clock_event_device *evt)
 }
 
 /* Setup the local clock events for a CPU */
-void __cpuinit local_timer_setup(struct clock_event_device *evt)
+int __cpuinit local_timer_setup(struct clock_event_device *evt)
 {
 	exynos4_mct_tick_init(evt);
+
+	return 0;
 }
 
 int local_timer_ack(void)
-- 
cgit v1.2.3-18-g5258


From 4bd0fe1c78623062263cf5ae875fd484c5b8256d Mon Sep 17 00:00:00 2001
From: Kukjin Kim <kgene.kim@samsung.com>
Date: Wed, 24 Aug 2011 20:05:21 +0900
Subject: ARM: EXYNOS4: Fix routing timer interrupt to offline CPU

The commit 5dfc54e087c15f823ee9b6541d2f0f314e69cbed
("ARM: GIC: avoid routing interrupts to offline CPUs")
prevents routing interrupts to offline CPUs. But in
case of timer on EXYNOS4, the irq_set_affinity() method
is called in percpu_timer_setup() before CPU1 becomes
online. So this patch fixes routing timer interrupt to
offline CPU.

Reported-by: Changhwan Youn <chaos.youn@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/platsmp.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos4/platsmp.c
index 7c2282c6ba8..df6ef1b2f98 100644
--- a/arch/arm/mach-exynos4/platsmp.c
+++ b/arch/arm/mach-exynos4/platsmp.c
@@ -106,6 +106,8 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	 */
 	spin_lock(&boot_lock);
 	spin_unlock(&boot_lock);
+
+	set_cpu_online(cpu, true);
 }
 
 int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
-- 
cgit v1.2.3-18-g5258


From aa421c13a9e318a75b42d9dd2eb85cc73d8aab6b Mon Sep 17 00:00:00 2001
From: Changhwan Youn <chaos.youn@samsung.com>
Date: Fri, 2 Sep 2011 14:10:52 +0900
Subject: ARM: EXYNOS4: restart clocksource while system resumes

System resume can't be completed because mct-frc isn't restarted
after system suspends. This patch restarts mct-frc during system
resume.

Reported-by: Jongpill Lee <boyko.lee@samsung.com>
Signed-off-by: Changhwan Youn <chaos.youn@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/mct.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c
index f3638fa73e6..ddd86864fb8 100644
--- a/arch/arm/mach-exynos4/mct.c
+++ b/arch/arm/mach-exynos4/mct.c
@@ -132,12 +132,18 @@ static cycle_t exynos4_frc_read(struct clocksource *cs)
 	return ((cycle_t)hi << 32) | lo;
 }
 
+static void exynos4_frc_resume(struct clocksource *cs)
+{
+	exynos4_mct_frc_start(0, 0);
+}
+
 struct clocksource mct_frc = {
 	.name		= "mct-frc",
 	.rating		= 400,
 	.read		= exynos4_frc_read,
 	.mask		= CLOCKSOURCE_MASK(64),
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+	.resume		= exynos4_frc_resume,
 };
 
 static void __init exynos4_clocksource_init(void)
-- 
cgit v1.2.3-18-g5258


From 0685d5ec3e8a2462c29920c1f8187a6c640b6fc9 Mon Sep 17 00:00:00 2001
From: Banajit Goswami <banajit.g@samsung.com>
Date: Thu, 18 Aug 2011 21:34:56 +0900
Subject: ARM: S3C64XX: Remove un-used code backlight code on SMDK6410

According to commit 96d78686d4("ARM: S3C64XX: Add PWM backlight
support on SMDK6410") and commit f00207b255("ARM: SAMSUNG: Create
a common infrastructure for PWM backlight support"), this should
not be used anymore.

And this patch fixes follwing warning:
arch/arm/mach-s3c64xx/mach-smdk6410.c:296: warning: 'smdk6410_backlight_device' defined but not used

Signed-off-by: Banajit Goswami <banajit.g@samsung.com>
[kgene.kim@samsung.com: modified commit message]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c64xx/mach-smdk6410.c | 39 -----------------------------------
 1 file changed, 39 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index ecbea92bf83..a9f3183e029 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -262,45 +262,6 @@ static struct samsung_keypad_platdata smdk6410_keypad_data __initdata = {
 	.cols		= 8,
 };
 
-static int smdk6410_backlight_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(S3C64XX_GPF(15), "Backlight");
-	if (ret) {
-		printk(KERN_ERR "failed to request GPF for PWM-OUT1\n");
-		return ret;
-	}
-
-	/* Configure GPIO pin with S3C64XX_GPF15_PWM_TOUT1 */
-	s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2));
-
-	return 0;
-}
-
-static void smdk6410_backlight_exit(struct device *dev)
-{
-	s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_OUTPUT);
-	gpio_free(S3C64XX_GPF(15));
-}
-
-static struct platform_pwm_backlight_data smdk6410_backlight_data = {
-	.pwm_id		= 1,
-	.max_brightness	= 255,
-	.dft_brightness	= 255,
-	.pwm_period_ns	= 78770,
-	.init		= smdk6410_backlight_init,
-	.exit		= smdk6410_backlight_exit,
-};
-
-static struct platform_device smdk6410_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent		= &s3c_device_timer[1].dev,
-		.platform_data	= &smdk6410_backlight_data,
-	},
-};
-
 static struct map_desc smdk6410_iodesc[] = {};
 
 static struct platform_device *smdk6410_devices[] __initdata = {
-- 
cgit v1.2.3-18-g5258


From caf27307fa322f079338480c7a3387e79d7d3712 Mon Sep 17 00:00:00 2001
From: Marek Szyprowski <m.szyprowski@samsung.com>
Date: Mon, 5 Sep 2011 20:10:06 +0900
Subject: ARM: SAMSUNG: fix watchdog reset issue with clk_get()

clkdev framework uses global mutex to protect clock tree, so it is not
possible to call clk_get() in interrupt context. This patch fixes this
issue and makes system reset by watchdog call working again.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/plat-samsung/clock.c                       | 11 +++++++++++
 arch/arm/plat-samsung/include/plat/clock.h          |  3 +++
 arch/arm/plat-samsung/include/plat/watchdog-reset.h | 10 +++-------
 3 files changed, 17 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c
index 302c42670bd..3b4451979d1 100644
--- a/arch/arm/plat-samsung/clock.c
+++ b/arch/arm/plat-samsung/clock.c
@@ -64,6 +64,17 @@ static LIST_HEAD(clocks);
  */
 DEFINE_SPINLOCK(clocks_lock);
 
+/* Global watchdog clock used by arch_wtd_reset() callback */
+struct clk *s3c2410_wdtclk;
+static int __init s3c_wdt_reset_init(void)
+{
+	s3c2410_wdtclk = clk_get(NULL, "watchdog");
+	if (IS_ERR(s3c2410_wdtclk))
+		printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
+	return 0;
+}
+arch_initcall(s3c_wdt_reset_init);
+
 /* enable and disable calls for use with the clk struct */
 
 static int clk_null_enable(struct clk *clk, int enable)
diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h
index 87d5b38a86f..8f95700d296 100644
--- a/arch/arm/plat-samsung/include/plat/clock.h
+++ b/arch/arm/plat-samsung/include/plat/clock.h
@@ -121,3 +121,6 @@ extern int s3c64xx_sclk_ctrl(struct clk *clk, int enable);
 
 extern void s3c_pwmclk_init(void);
 
+/* Global watchdog clock used by arch_wtd_reset() callback */
+
+extern struct clk *s3c2410_wdtclk;
diff --git a/arch/arm/plat-samsung/include/plat/watchdog-reset.h b/arch/arm/plat-samsung/include/plat/watchdog-reset.h
index 54b762acb5a..40dbb2b0ae2 100644
--- a/arch/arm/plat-samsung/include/plat/watchdog-reset.h
+++ b/arch/arm/plat-samsung/include/plat/watchdog-reset.h
@@ -10,6 +10,7 @@
  * published by the Free Software Foundation.
 */
 
+#include <plat/clock.h>
 #include <plat/regs-watchdog.h>
 #include <mach/map.h>
 
@@ -19,17 +20,12 @@
 
 static inline void arch_wdt_reset(void)
 {
-	struct clk *wdtclk;
-
 	printk("arch_reset: attempting watchdog reset\n");
 
 	__raw_writel(0, S3C2410_WTCON);	  /* disable watchdog, to be safe  */
 
-	wdtclk = clk_get(NULL, "watchdog");
-	if (!IS_ERR(wdtclk)) {
-		clk_enable(wdtclk);
-	} else
-		printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
+	if (s3c2410_wdtclk)
+		clk_enable(s3c2410_wdtclk);
 
 	/* put initial values into count and data */
 	__raw_writel(0x80, S3C2410_WTCNT);
-- 
cgit v1.2.3-18-g5258


From 3a0ec25954a2667738f39f34096df3f4cb102983 Mon Sep 17 00:00:00 2001
From: Kukjin Kim <kgene.kim@samsung.com>
Date: Fri, 19 Aug 2011 21:12:19 +0900
Subject: ARM: SAMSUNG: fix to prevent declaring duplicated

The plat/clock.h revised to prevent declaring duplicated.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/plat-samsung/include/plat/clock.h | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h
index 8f95700d296..73c66d4d10f 100644
--- a/arch/arm/plat-samsung/include/plat/clock.h
+++ b/arch/arm/plat-samsung/include/plat/clock.h
@@ -9,6 +9,9 @@
  * published by the Free Software Foundation.
 */
 
+#ifndef __ASM_PLAT_CLOCK_H
+#define __ASM_PLAT_CLOCK_H __FILE__
+
 #include <linux/spinlock.h>
 #include <linux/clkdev.h>
 
@@ -124,3 +127,5 @@ extern void s3c_pwmclk_init(void);
 /* Global watchdog clock used by arch_wtd_reset() callback */
 
 extern struct clk *s3c2410_wdtclk;
+
+#endif /* __ASM_PLAT_CLOCK_H */
-- 
cgit v1.2.3-18-g5258


From d03c35939d2a447093e60133156217d6512aa9e3 Mon Sep 17 00:00:00 2001
From: Thomas Abraham <thomas.abraham@linaro.org>
Date: Thu, 15 Sep 2011 14:34:03 +0900
Subject: ARM: EXYNOS4: fix incorrect pad configuration for keypad row lines

The keypad controller requires a external pull-up for all the keypad
row lines. Fix the incorrect pad configuration for keypad controller
row lines by enabling the pad pull-up for the all row lines of the
keypad controller.

Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/setup-keypad.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/setup-keypad.c b/arch/arm/mach-exynos4/setup-keypad.c
index 1ee0ebff111..7862bfb5933 100644
--- a/arch/arm/mach-exynos4/setup-keypad.c
+++ b/arch/arm/mach-exynos4/setup-keypad.c
@@ -19,15 +19,16 @@ void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
 
 	if (rows > 8) {
 		/* Set all the necessary GPX2 pins: KP_ROW[0~7] */
-		s3c_gpio_cfgrange_nopull(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3));
+		s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3),
+					S3C_GPIO_PULL_UP);
 
 		/* Set all the necessary GPX3 pins: KP_ROW[8~] */
-		s3c_gpio_cfgrange_nopull(EXYNOS4_GPX3(0), (rows - 8),
-					 S3C_GPIO_SFN(3));
+		s3c_gpio_cfgall_range(EXYNOS4_GPX3(0), (rows - 8),
+					 S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
 	} else {
 		/* Set all the necessary GPX2 pins: KP_ROW[x] */
-		s3c_gpio_cfgrange_nopull(EXYNOS4_GPX2(0), rows,
-					 S3C_GPIO_SFN(3));
+		s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), rows, S3C_GPIO_SFN(3),
+					S3C_GPIO_PULL_UP);
 	}
 
 	/* Set all the necessary GPX1 pins to special-function 3: KP_COL[x] */
-- 
cgit v1.2.3-18-g5258


From 61cca2fab7ecba18f9b9680cd736ef5fa82ad3b1 Mon Sep 17 00:00:00 2001
From: Jan Beulich <JBeulich@suse.com>
Date: Thu, 15 Sep 2011 08:52:40 +0100
Subject: xen/i386: follow-up to "replace order-based range checking of M2P
 table by linear one"

The numbers obtained from the hypervisor really can't ever lead to an
overflow here, only the original calculation going through the order
of the range could have. This avoids the (as Jeremy points outs)
somewhat ugly NULL-based calculation here.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
 arch/x86/xen/mmu.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 24abc1f50dc..a3872f7632e 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -1721,10 +1721,8 @@ void __init xen_setup_machphys_mapping(void)
 		machine_to_phys_nr = MACH2PHYS_NR_ENTRIES;
 	}
 #ifdef CONFIG_X86_32
-	if ((machine_to_phys_mapping + machine_to_phys_nr)
-	    < machine_to_phys_mapping)
-		machine_to_phys_nr = (unsigned long *)NULL
-				     - machine_to_phys_mapping;
+	WARN_ON((machine_to_phys_mapping + (machine_to_phys_nr - 1))
+		< machine_to_phys_mapping);
 #endif
 }
 
-- 
cgit v1.2.3-18-g5258


From a7f934d4f16144cb9521b62e9b8c9ac0118097da Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Thu, 15 Sep 2011 13:28:33 -0700
Subject: asm alternatives: remove incorrect alignment notes

On x86-64, they were just wasteful: with the explicitly added (now
unnecessary) padding, the size of the alternatives structure was 16
bytes, and an alignment of 8 bytes didn't hurt much.

However, it was still silly, since the natural size and alignment for
the structure is actually just 12 bytes, 4-byte aligned since commit
59e97e4d6fbc ("x86: Make alternative instruction pointers relative").
So removing the padding, and removing the extra alignment is just a good
idea.

On x86-32, the alignment of 4 bytes was correct, but was incorrectly
hardcoded as 8 bytes in <asm/alternative-asm.h>.  That header file had
used to be an x86-64 only header file, but various unification efforts
have made it be used for x86-32 too (ie the unification of rwlock and
rwsem).

That in turn caused x86-32 boot failures, because the extra alignment
would result in random zero-filled words in the altinstructions section,
causing oopses early at boot when doing alternative instruction
replacement.

So just remove all the alignment noise entirely.  It's wrong, and it's
unnecessary.  The section itself is already properly aligned by the
linker scripts, and all additions to the section had better be of the
proper 12-byte format, keeping it aligned.  So if the align directive
were to ever make a difference, that would be an indication of a serious
bug to begin with.

Reported-by: Werner Landgraf <w.landgraf@ru.r>
Acked-by: Andrew Lutomirski <luto@mit.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/include/asm/alternative-asm.h | 1 -
 arch/x86/include/asm/alternative.h     | 4 ----
 arch/x86/include/asm/cpufeature.h      | 2 --
 3 files changed, 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/alternative-asm.h b/arch/x86/include/asm/alternative-asm.h
index 4554cc6fb96..091508b533b 100644
--- a/arch/x86/include/asm/alternative-asm.h
+++ b/arch/x86/include/asm/alternative-asm.h
@@ -16,7 +16,6 @@
 #endif
 
 .macro altinstruction_entry orig alt feature orig_len alt_len
-	.align 8
 	.long \orig - .
 	.long \alt - .
 	.word \feature
diff --git a/arch/x86/include/asm/alternative.h b/arch/x86/include/asm/alternative.h
index 23fb6d79f20..37ad100a221 100644
--- a/arch/x86/include/asm/alternative.h
+++ b/arch/x86/include/asm/alternative.h
@@ -48,9 +48,6 @@ struct alt_instr {
 	u16 cpuid;		/* cpuid bit set for replacement */
 	u8  instrlen;		/* length of original instruction */
 	u8  replacementlen;	/* length of new instruction, <= instrlen */
-#ifdef CONFIG_X86_64
-	u32 pad2;
-#endif
 };
 
 extern void alternative_instructions(void);
@@ -83,7 +80,6 @@ static inline int alternatives_text_reserved(void *start, void *end)
 									\
       "661:\n\t" oldinstr "\n662:\n"					\
       ".section .altinstructions,\"a\"\n"				\
-      _ASM_ALIGN "\n"							\
       "	 .long 661b - .\n"			/* label           */	\
       "	 .long 663f - .\n"			/* new instruction */	\
       "	 .word " __stringify(feature) "\n"	/* feature bit     */	\
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 4258aac99a6..88b23a43f34 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -332,7 +332,6 @@ static __always_inline __pure bool __static_cpu_has(u16 bit)
 		asm goto("1: jmp %l[t_no]\n"
 			 "2:\n"
 			 ".section .altinstructions,\"a\"\n"
-			 _ASM_ALIGN "\n"
 			 " .long 1b - .\n"
 			 " .long 0\n"		/* no replacement */
 			 " .word %P0\n"		/* feature bit */
@@ -350,7 +349,6 @@ static __always_inline __pure bool __static_cpu_has(u16 bit)
 		asm volatile("1: movb $0,%0\n"
 			     "2:\n"
 			     ".section .altinstructions,\"a\"\n"
-			     _ASM_ALIGN "\n"
 			     " .long 1b - .\n"
 			     " .long 3f - .\n"
 			     " .word %P1\n"		/* feature bit */
-- 
cgit v1.2.3-18-g5258


From ead841c2ed986f7cc6a4830e816b0f633f95cf7f Mon Sep 17 00:00:00 2001
From: Heiko Stuebner <heiko@sntech.de>
Date: Thu, 18 Aug 2011 20:16:56 +0900
Subject: ARM: S3C24XX: Remove hw_addr from s3c24xx dma channel declarations

According to commit c4806174c516d26bf4a72db1789cfc96e4950d07
(ARM: S3C2412: DMA: Remove I2S FIFO address) the S3C DMA API does not
make use of hw_addr.to/from declared for some of the channels in
mach-s3c24XX/dma.c

Grepping through the kernel also did non reveal any new users of
these properties since the mentioned commit.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c2410/dma.c | 14 --------------
 arch/arm/mach-s3c2412/dma.c | 18 ------------------
 arch/arm/mach-s3c2440/dma.c | 17 -----------------
 arch/arm/mach-s3c2443/dma.c | 27 ---------------------------
 4 files changed, 76 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index 0d8e043804c..dbe43df8cfe 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -47,38 +47,26 @@ static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = {
 		.channels[0]	= S3C2410_DCON_CH0_SDI | DMA_CH_VALID,
 		.channels[2]	= S3C2410_DCON_CH2_SDI | DMA_CH_VALID,
 		.channels[3]	= S3C2410_DCON_CH3_SDI | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
-		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
 	},
 	[DMACH_SPI0] = {
 		.name		= "spi0",
 		.channels[1]	= S3C2410_DCON_CH1_SPI | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_SPI + S3C2410_SPTDAT,
-		.hw_addr.from	= S3C2410_PA_SPI + S3C2410_SPRDAT,
 	},
 	[DMACH_SPI1] = {
 		.name		= "spi1",
 		.channels[3]	= S3C2410_DCON_CH3_SPI | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
-		.hw_addr.from	= S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
 	},
 	[DMACH_UART0] = {
 		.name		= "uart0",
 		.channels[0]	= S3C2410_DCON_CH0_UART0 | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_UART0 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART0 + S3C2410_URXH,
 	},
 	[DMACH_UART1] = {
 		.name		= "uart1",
 		.channels[1]	= S3C2410_DCON_CH1_UART1 | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_UART1 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART1 + S3C2410_URXH,
 	},
       	[DMACH_UART2] = {
 		.name		= "uart2",
 		.channels[3]	= S3C2410_DCON_CH3_UART2 | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_UART2 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART2 + S3C2410_URXH,
 	},
 	[DMACH_TIMER] = {
 		.name		= "timer",
@@ -90,12 +78,10 @@ static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = {
 		.name		= "i2s-sdi",
 		.channels[1]	= S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID,
 		.channels[2]	= S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID,
-		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
 	},
 	[DMACH_I2S_OUT] = {
 		.name		= "i2s-sdo",
 		.channels[2]	= S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
 	},
 	[DMACH_USB_EP1] = {
 		.name		= "usb-ep1",
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index 7abecfca0b7..c61e3261615 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -50,64 +50,46 @@ static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = {
 		.name		= "sdi",
 		.channels	= MAP(S3C2412_DMAREQSEL_SDI),
 		.channels_rx	= MAP(S3C2412_DMAREQSEL_SDI),
-		.hw_addr.to	= S3C2410_PA_SDI + S3C2410_SDIDATA,
-		.hw_addr.from	= S3C2410_PA_SDI + S3C2410_SDIDATA,
 	},
 	[DMACH_SPI0] = {
 		.name		= "spi0",
 		.channels	= MAP(S3C2412_DMAREQSEL_SPI0TX),
 		.channels_rx	= MAP(S3C2412_DMAREQSEL_SPI0RX),
-		.hw_addr.to	= S3C2410_PA_SPI + S3C2410_SPTDAT,
-		.hw_addr.from	= S3C2410_PA_SPI + S3C2410_SPRDAT,
 	},
 	[DMACH_SPI1] = {
 		.name		= "spi1",
 		.channels	= MAP(S3C2412_DMAREQSEL_SPI1TX),
 		.channels_rx	= MAP(S3C2412_DMAREQSEL_SPI1RX),
-		.hw_addr.to	= S3C2410_PA_SPI + S3C2412_SPI1 + S3C2410_SPTDAT,
-		.hw_addr.from	= S3C2410_PA_SPI + S3C2412_SPI1  + S3C2410_SPRDAT,
 	},
 	[DMACH_UART0] = {
 		.name		= "uart0",
 		.channels	= MAP(S3C2412_DMAREQSEL_UART0_0),
 		.channels_rx	= MAP(S3C2412_DMAREQSEL_UART0_0),
-		.hw_addr.to	= S3C2410_PA_UART0 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART0 + S3C2410_URXH,
 	},
 	[DMACH_UART1] = {
 		.name		= "uart1",
 		.channels	= MAP(S3C2412_DMAREQSEL_UART1_0),
 		.channels_rx	= MAP(S3C2412_DMAREQSEL_UART1_0),
-		.hw_addr.to	= S3C2410_PA_UART1 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART1 + S3C2410_URXH,
 	},
       	[DMACH_UART2] = {
 		.name		= "uart2",
 		.channels	= MAP(S3C2412_DMAREQSEL_UART2_0),
 		.channels_rx	= MAP(S3C2412_DMAREQSEL_UART2_0),
-		.hw_addr.to	= S3C2410_PA_UART2 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART2 + S3C2410_URXH,
 	},
 	[DMACH_UART0_SRC2] = {
 		.name		= "uart0",
 		.channels	= MAP(S3C2412_DMAREQSEL_UART0_1),
 		.channels_rx	= MAP(S3C2412_DMAREQSEL_UART0_1),
-		.hw_addr.to	= S3C2410_PA_UART0 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART0 + S3C2410_URXH,
 	},
 	[DMACH_UART1_SRC2] = {
 		.name		= "uart1",
 		.channels	= MAP(S3C2412_DMAREQSEL_UART1_1),
 		.channels_rx	= MAP(S3C2412_DMAREQSEL_UART1_1),
-		.hw_addr.to	= S3C2410_PA_UART1 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART1 + S3C2410_URXH,
 	},
       	[DMACH_UART2_SRC2] = {
 		.name		= "uart2",
 		.channels	= MAP(S3C2412_DMAREQSEL_UART2_1),
 		.channels_rx	= MAP(S3C2412_DMAREQSEL_UART2_1),
-		.hw_addr.to	= S3C2410_PA_UART2 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART2 + S3C2410_URXH,
 	},
 	[DMACH_TIMER] = {
 		.name		= "timer",
diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c
index 3b0529f54e9..0e73f8f9d13 100644
--- a/arch/arm/mach-s3c2440/dma.c
+++ b/arch/arm/mach-s3c2440/dma.c
@@ -48,38 +48,26 @@ static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = {
 		.channels[1]	= S3C2440_DCON_CH1_SDI | DMA_CH_VALID,
 		.channels[2]	= S3C2410_DCON_CH2_SDI | DMA_CH_VALID,
 		.channels[3]	= S3C2410_DCON_CH3_SDI | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
-		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
 	},
 	[DMACH_SPI0] = {
 		.name		= "spi0",
 		.channels[1]	= S3C2410_DCON_CH1_SPI | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_SPI + S3C2410_SPTDAT,
-		.hw_addr.from	= S3C2410_PA_SPI + S3C2410_SPRDAT,
 	},
 	[DMACH_SPI1] = {
 		.name		= "spi1",
 		.channels[3]	= S3C2410_DCON_CH3_SPI | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
-		.hw_addr.from	= S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
 	},
 	[DMACH_UART0] = {
 		.name		= "uart0",
 		.channels[0]	= S3C2410_DCON_CH0_UART0 | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_UART0 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART0 + S3C2410_URXH,
 	},
 	[DMACH_UART1] = {
 		.name		= "uart1",
 		.channels[1]	= S3C2410_DCON_CH1_UART1 | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_UART1 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART1 + S3C2410_URXH,
 	},
       	[DMACH_UART2] = {
 		.name		= "uart2",
 		.channels[3]	= S3C2410_DCON_CH3_UART2 | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_UART2 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART2 + S3C2410_URXH,
 	},
 	[DMACH_TIMER] = {
 		.name		= "timer",
@@ -91,31 +79,26 @@ static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = {
 		.name		= "i2s-sdi",
 		.channels[1]	= S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID,
 		.channels[2]	= S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID,
-		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
 	},
 	[DMACH_I2S_OUT] = {
 		.name		= "i2s-sdo",
 		.channels[0]	= S3C2440_DCON_CH0_I2SSDO | DMA_CH_VALID,
 		.channels[2]	= S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
 	},
 	[DMACH_PCM_IN] = {
 		.name		= "pcm-in",
 		.channels[0]	= S3C2440_DCON_CH0_PCMIN | DMA_CH_VALID,
 		.channels[2]	= S3C2440_DCON_CH2_PCMIN | DMA_CH_VALID,
-		.hw_addr.from	= S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
 	},
 	[DMACH_PCM_OUT] = {
 		.name		= "pcm-out",
 		.channels[1]	= S3C2440_DCON_CH1_PCMOUT | DMA_CH_VALID,
 		.channels[3]	= S3C2440_DCON_CH3_PCMOUT | DMA_CH_VALID,
-		.hw_addr.to	= S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
 	},
 	[DMACH_MIC_IN] = {
 		.name		= "mic-in",
 		.channels[2]	= S3C2440_DCON_CH2_MICIN | DMA_CH_VALID,
 		.channels[3]	= S3C2440_DCON_CH3_MICIN | DMA_CH_VALID,
-		.hw_addr.from	= S3C2440_PA_AC97 + S3C_AC97_MIC_DATA,
 	},
 	[DMACH_USB_EP1] = {
 		.name		= "usb-ep1",
diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c
index 3f658685ec1..fe52151d2e8 100644
--- a/arch/arm/mach-s3c2443/dma.c
+++ b/arch/arm/mach-s3c2443/dma.c
@@ -54,68 +54,46 @@ static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = {
 	[DMACH_SDI] = {
 		.name		= "sdi",
 		.channels	= MAP(S3C2443_DMAREQSEL_SDI),
-		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
-		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
 	},
 	[DMACH_SPI0] = {
 		.name		= "spi0",
 		.channels	= MAP(S3C2443_DMAREQSEL_SPI0TX),
-		.hw_addr.to	= S3C2410_PA_SPI + S3C2410_SPTDAT,
-		.hw_addr.from	= S3C2410_PA_SPI + S3C2410_SPRDAT,
 	},
 	[DMACH_SPI1] = {
 		.name		= "spi1",
 		.channels	= MAP(S3C2443_DMAREQSEL_SPI1TX),
-		.hw_addr.to	= S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
-		.hw_addr.from	= S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
 	},
 	[DMACH_UART0] = {
 		.name		= "uart0",
 		.channels	= MAP(S3C2443_DMAREQSEL_UART0_0),
-		.hw_addr.to	= S3C2410_PA_UART0 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART0 + S3C2410_URXH,
 	},
 	[DMACH_UART1] = {
 		.name		= "uart1",
 		.channels	= MAP(S3C2443_DMAREQSEL_UART1_0),
-		.hw_addr.to	= S3C2410_PA_UART1 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART1 + S3C2410_URXH,
 	},
       	[DMACH_UART2] = {
 		.name		= "uart2",
 		.channels	= MAP(S3C2443_DMAREQSEL_UART2_0),
-		.hw_addr.to	= S3C2410_PA_UART2 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART2 + S3C2410_URXH,
 	},
       	[DMACH_UART3] = {
 		.name		= "uart3",
 		.channels	= MAP(S3C2443_DMAREQSEL_UART3_0),
-		.hw_addr.to	= S3C2443_PA_UART3 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2443_PA_UART3 + S3C2410_URXH,
 	},
 	[DMACH_UART0_SRC2] = {
 		.name		= "uart0",
 		.channels	= MAP(S3C2443_DMAREQSEL_UART0_1),
-		.hw_addr.to	= S3C2410_PA_UART0 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART0 + S3C2410_URXH,
 	},
 	[DMACH_UART1_SRC2] = {
 		.name		= "uart1",
 		.channels	= MAP(S3C2443_DMAREQSEL_UART1_1),
-		.hw_addr.to	= S3C2410_PA_UART1 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART1 + S3C2410_URXH,
 	},
       	[DMACH_UART2_SRC2] = {
 		.name		= "uart2",
 		.channels	= MAP(S3C2443_DMAREQSEL_UART2_1),
-		.hw_addr.to	= S3C2410_PA_UART2 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART2 + S3C2410_URXH,
 	},
       	[DMACH_UART3_SRC2] = {
 		.name		= "uart3",
 		.channels	= MAP(S3C2443_DMAREQSEL_UART3_1),
-		.hw_addr.to	= S3C2443_PA_UART3 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2443_PA_UART3 + S3C2410_URXH,
 	},
 	[DMACH_TIMER] = {
 		.name		= "timer",
@@ -124,27 +102,22 @@ static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = {
 	[DMACH_I2S_IN] = {
 		.name		= "i2s-sdi",
 		.channels	= MAP(S3C2443_DMAREQSEL_I2SRX),
-		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
 	},
 	[DMACH_I2S_OUT] = {
 		.name		= "i2s-sdo",
 		.channels	= MAP(S3C2443_DMAREQSEL_I2STX),
-		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
 	},
 	[DMACH_PCM_IN] = {
 		.name		= "pcm-in",
 		.channels	= MAP(S3C2443_DMAREQSEL_PCMIN),
-		.hw_addr.from	= S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
 	},
 	[DMACH_PCM_OUT] = {
 		.name		= "pcm-out",
 		.channels	= MAP(S3C2443_DMAREQSEL_PCMOUT),
-		.hw_addr.to	= S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
 	},
 	[DMACH_MIC_IN] = {
 		.name		= "mic-in",
 		.channels	= MAP(S3C2443_DMAREQSEL_MICIN),
-		.hw_addr.from	= S3C2440_PA_AC97 + S3C_AC97_MIC_DATA,
 	},
 };
 
-- 
cgit v1.2.3-18-g5258


From 81b69636f50880dce502d62d9aaade15399557c5 Mon Sep 17 00:00:00 2001
From: Heiko Stuebner <heiko@sntech.de>
Date: Thu, 18 Aug 2011 20:16:56 +0900
Subject: ARM: S3C24XX: Remove s3c24xx_dma_addr definition

As all users of s3c24xx_dma_addr are gone now, remove it completely.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/plat-samsung/include/plat/dma-s3c24xx.h | 6 ------
 1 file changed, 6 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
index 336d5ac0203..ab9bce637cb 100644
--- a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
+++ b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
@@ -18,11 +18,6 @@ extern struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
 #define DMA_CH_VALID		(1<<31)
 #define DMA_CH_NEVER		(1<<30)
 
-struct s3c24xx_dma_addr {
-	unsigned long		from;
-	unsigned long		to;
-};
-
 /* struct s3c24xx_dma_map
  *
  * this holds the mapping information for the channel selected
@@ -31,7 +26,6 @@ struct s3c24xx_dma_addr {
 
 struct s3c24xx_dma_map {
 	const char		*name;
-	struct s3c24xx_dma_addr  hw_addr;
 
 	unsigned long		 channels[S3C_DMA_CHANNELS];
 	unsigned long		 channels_rx[S3C_DMA_CHANNELS];
-- 
cgit v1.2.3-18-g5258


From c4f4ac08e2e02f559c9d09a5552a41d3193c79c3 Mon Sep 17 00:00:00 2001
From: Abhilash Kesavan <a.kesavan@samsung.com>
Date: Sat, 13 Aug 2011 10:35:04 +0900
Subject: ARM: S5PV210: Remove unnecessary symbol for PM

Make the S5PV210 power management code depend directly on PM rather
than another S5PV210 specific symbol.

Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s5pv210/Kconfig  | 6 ------
 arch/arm/mach-s5pv210/Makefile | 2 +-
 2 files changed, 1 insertion(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 69dd87cd8e2..aaeb44a7371 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -14,7 +14,6 @@ config CPU_S5PV210
 	select S3C_PL330_DMA
 	select S5P_EXT_INT
 	select S5P_HRT
-	select S5PV210_PM if PM
 	help
 	  Enable S5PV210 CPU support
 
@@ -169,9 +168,4 @@ config MACH_TORBRECK
 
 endmenu
 
-config S5PV210_PM
-	bool
-	help
-	  Power Management code common to S5PV210
-
 endif
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
index 599a3c0e8f6..ef7e4668d67 100644
--- a/arch/arm/mach-s5pv210/Makefile
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -14,7 +14,7 @@ obj-				:=
 
 obj-$(CONFIG_CPU_S5PV210)	+= cpu.o init.o clock.o dma.o
 obj-$(CONFIG_CPU_S5PV210)	+= setup-i2c0.o
-obj-$(CONFIG_S5PV210_PM)	+= pm.o sleep.o
+obj-$(CONFIG_PM)		+= pm.o sleep.o
 
 # machine support
 
-- 
cgit v1.2.3-18-g5258


From 03a0edd1db8ec2685e951df37681fda43b0e3084 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Thu, 18 Aug 2011 20:01:34 +0900
Subject: ARM: S3C64XX: Remove unused CPU devices for Cragganmore

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c64xx/mach-crag6410.c | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index af0c2fe1ea3..f32ec68002e 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -329,9 +329,6 @@ static struct platform_device *crag6410_devices[] __initdata = {
 	&s3c_device_fb,
 	&s3c_device_ohci,
 	&s3c_device_usb_hsotg,
-	&s3c_device_adc,
-	&s3c_device_rtc,
-	&s3c_device_ts,
 	&s3c_device_timer[0],
 	&s3c64xx_device_iis0,
 	&s3c64xx_device_iis1,
-- 
cgit v1.2.3-18-g5258


From 5e8e0a109e3c1b08c1407c615684bb9981aca28f Mon Sep 17 00:00:00 2001
From: Banajit Goswami <banajit.g@samsung.com>
Date: Thu, 18 Aug 2011 20:32:01 +0900
Subject: ARM: SAMSUNG: Consolidate common function to set SDHCI plat data

Moves similar functions to set SDHCI platform data for all Samsung
boards to a common location, thereby saves a few lines.

Signed-off-by: Banajit Goswami <banajit.g@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/plat-samsung/dev-hsmmc.c          | 19 +------------------
 arch/arm/plat-samsung/dev-hsmmc1.c         | 19 +------------------
 arch/arm/plat-samsung/dev-hsmmc2.c         | 19 +------------------
 arch/arm/plat-samsung/dev-hsmmc3.c         | 19 +------------------
 arch/arm/plat-samsung/include/plat/sdhci.h |  7 +++++++
 arch/arm/plat-samsung/platformdata.c       | 22 ++++++++++++++++++++++
 6 files changed, 33 insertions(+), 72 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-samsung/dev-hsmmc.c b/arch/arm/plat-samsung/dev-hsmmc.c
index db7a65c7f12..06825c4276d 100644
--- a/arch/arm/plat-samsung/dev-hsmmc.c
+++ b/arch/arm/plat-samsung/dev-hsmmc.c
@@ -58,22 +58,5 @@ struct platform_device s3c_device_hsmmc0 = {
 
 void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd)
 {
-	struct s3c_sdhci_platdata *set = &s3c_hsmmc0_def_platdata;
-
-	set->cd_type = pd->cd_type;
-	set->ext_cd_init = pd->ext_cd_init;
-	set->ext_cd_cleanup = pd->ext_cd_cleanup;
-	set->ext_cd_gpio = pd->ext_cd_gpio;
-	set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
-
-	if (pd->max_width)
-		set->max_width = pd->max_width;
-	if (pd->cfg_gpio)
-		set->cfg_gpio = pd->cfg_gpio;
-	if (pd->cfg_card)
-		set->cfg_card = pd->cfg_card;
-	if (pd->host_caps)
-		set->host_caps |= pd->host_caps;
-	if (pd->clk_type)
-		set->clk_type = pd->clk_type;
+	s3c_sdhci_set_platdata(pd, &s3c_hsmmc0_def_platdata);
 }
diff --git a/arch/arm/plat-samsung/dev-hsmmc1.c b/arch/arm/plat-samsung/dev-hsmmc1.c
index 2497321f08d..4524ef44001 100644
--- a/arch/arm/plat-samsung/dev-hsmmc1.c
+++ b/arch/arm/plat-samsung/dev-hsmmc1.c
@@ -58,22 +58,5 @@ struct platform_device s3c_device_hsmmc1 = {
 
 void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd)
 {
-	struct s3c_sdhci_platdata *set = &s3c_hsmmc1_def_platdata;
-
-	set->cd_type = pd->cd_type;
-	set->ext_cd_init = pd->ext_cd_init;
-	set->ext_cd_cleanup = pd->ext_cd_cleanup;
-	set->ext_cd_gpio = pd->ext_cd_gpio;
-	set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
-
-	if (pd->max_width)
-		set->max_width = pd->max_width;
-	if (pd->cfg_gpio)
-		set->cfg_gpio = pd->cfg_gpio;
-	if (pd->cfg_card)
-		set->cfg_card = pd->cfg_card;
-	if (pd->host_caps)
-		set->host_caps |= pd->host_caps;
-	if (pd->clk_type)
-		set->clk_type = pd->clk_type;
+	s3c_sdhci_set_platdata(pd, &s3c_hsmmc1_def_platdata);
 }
diff --git a/arch/arm/plat-samsung/dev-hsmmc2.c b/arch/arm/plat-samsung/dev-hsmmc2.c
index f60aedba417..9cede9615e4 100644
--- a/arch/arm/plat-samsung/dev-hsmmc2.c
+++ b/arch/arm/plat-samsung/dev-hsmmc2.c
@@ -59,22 +59,5 @@ struct platform_device s3c_device_hsmmc2 = {
 
 void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd)
 {
-	struct s3c_sdhci_platdata *set = &s3c_hsmmc2_def_platdata;
-
-	set->cd_type = pd->cd_type;
-	set->ext_cd_init = pd->ext_cd_init;
-	set->ext_cd_cleanup = pd->ext_cd_cleanup;
-	set->ext_cd_gpio = pd->ext_cd_gpio;
-	set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
-
-	if (pd->max_width)
-		set->max_width = pd->max_width;
-	if (pd->cfg_gpio)
-		set->cfg_gpio = pd->cfg_gpio;
-	if (pd->cfg_card)
-		set->cfg_card = pd->cfg_card;
-	if (pd->host_caps)
-		set->host_caps |= pd->host_caps;
-	if (pd->clk_type)
-		set->clk_type = pd->clk_type;
+	s3c_sdhci_set_platdata(pd, &s3c_hsmmc2_def_platdata);
 }
diff --git a/arch/arm/plat-samsung/dev-hsmmc3.c b/arch/arm/plat-samsung/dev-hsmmc3.c
index ede776f20e6..0358ef4a8f6 100644
--- a/arch/arm/plat-samsung/dev-hsmmc3.c
+++ b/arch/arm/plat-samsung/dev-hsmmc3.c
@@ -62,22 +62,5 @@ struct platform_device s3c_device_hsmmc3 = {
 
 void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd)
 {
-	struct s3c_sdhci_platdata *set = &s3c_hsmmc3_def_platdata;
-
-	set->cd_type = pd->cd_type;
-	set->ext_cd_init = pd->ext_cd_init;
-	set->ext_cd_cleanup = pd->ext_cd_cleanup;
-	set->ext_cd_gpio = pd->ext_cd_gpio;
-	set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
-
-	if (pd->max_width)
-		set->max_width = pd->max_width;
-	if (pd->cfg_gpio)
-		set->cfg_gpio = pd->cfg_gpio;
-	if (pd->cfg_card)
-		set->cfg_card = pd->cfg_card;
-	if (pd->host_caps)
-		set->host_caps |= pd->host_caps;
-	if (pd->clk_type)
-		set->clk_type = pd->clk_type;
+	s3c_sdhci_set_platdata(pd, &s3c_hsmmc3_def_platdata);
 }
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index 058e09654fe..4a6552066c7 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -86,6 +86,13 @@ struct s3c_sdhci_platdata {
 			    struct mmc_card *card);
 };
 
+/* s3c_sdhci_set_platdata() - common helper for setting SDHCI platform data
+ * @pd: The default platform data for this device.
+ * @set: Pointer to the platform data to fill in.
+ */
+extern void s3c_sdhci_set_platdata(struct s3c_sdhci_platdata *pd,
+				    struct s3c_sdhci_platdata *set);
+
 /**
  * s3c_sdhci0_set_platdata - Set platform data for S3C SDHCI device.
  * @pd: Platform data to register to device.
diff --git a/arch/arm/plat-samsung/platformdata.c b/arch/arm/plat-samsung/platformdata.c
index 7cf2e1e3b20..6de1a382592 100644
--- a/arch/arm/plat-samsung/platformdata.c
+++ b/arch/arm/plat-samsung/platformdata.c
@@ -14,6 +14,7 @@
 #include <linux/platform_device.h>
 
 #include <plat/devs.h>
+#include <plat/sdhci.h>
 
 void __init *s3c_set_platdata(void *pd, size_t pdsize,
 			      struct platform_device *pdev)
@@ -35,3 +36,24 @@ void __init *s3c_set_platdata(void *pd, size_t pdsize,
 	pdev->dev.platform_data = npd;
 	return npd;
 }
+
+void s3c_sdhci_set_platdata(struct s3c_sdhci_platdata *pd,
+			     struct s3c_sdhci_platdata *set)
+{
+	set->cd_type = pd->cd_type;
+	set->ext_cd_init = pd->ext_cd_init;
+	set->ext_cd_cleanup = pd->ext_cd_cleanup;
+	set->ext_cd_gpio = pd->ext_cd_gpio;
+	set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
+
+	if (pd->max_width)
+		set->max_width = pd->max_width;
+	if (pd->cfg_gpio)
+		set->cfg_gpio = pd->cfg_gpio;
+	if (pd->cfg_card)
+		set->cfg_card = pd->cfg_card;
+	if (pd->host_caps)
+		set->host_caps |= pd->host_caps;
+	if (pd->clk_type)
+		set->clk_type = pd->clk_type;
+}
-- 
cgit v1.2.3-18-g5258


From 0804765afcafe9c88890af7ab71710603ccd9442 Mon Sep 17 00:00:00 2001
From: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Date: Fri, 19 Aug 2011 21:56:10 +0900
Subject: ARM: SAMSUNG: Remove unnecessary duplication of plat_data on TSADC

The default plat_data struct for TSADC is added in devs-ts.c
and duplication is removed from the following machines.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c64xx/mach-mini6410.c | 8 +-------
 arch/arm/mach-s3c64xx/mach-real6410.c | 8 +-------
 arch/arm/mach-s3c64xx/mach-smdk6410.c | 8 +-------
 arch/arm/mach-s5p64x0/mach-smdk6440.c | 8 +-------
 arch/arm/mach-s5p64x0/mach-smdk6450.c | 8 +-------
 arch/arm/mach-s5pc100/mach-smdkc100.c | 8 +-------
 arch/arm/mach-s5pv210/mach-smdkv210.c | 8 +-------
 arch/arm/plat-samsung/dev-ts.c        | 9 +++++++++
 8 files changed, 16 insertions(+), 49 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 527f49bd1b5..8f34a3c1049 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -205,12 +205,6 @@ static struct platform_device mini6410_lcd_powerdev = {
 	.dev.platform_data	= &mini6410_lcd_power_data,
 };
 
-static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
-	.delay			= 10000,
-	.presc			= 49,
-	.oversampling_shift	= 2,
-};
-
 static struct platform_device *mini6410_devices[] __initdata = {
 	&mini6410_device_eth,
 	&s3c_device_hsmmc0,
@@ -319,7 +313,7 @@ static void __init mini6410_machine_init(void)
 
 	s3c_nand_set_platdata(&mini6410_nand_info);
 	s3c_fb_set_platdata(&mini6410_lcd_pdata);
-	s3c24xx_ts_set_platdata(&s3c_ts_platform);
+	s3c24xx_ts_set_platdata(NULL);
 
 	/* configure nCS1 width to 16 bits */
 
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 95b04b1729e..1f5abfae4ea 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -198,12 +198,6 @@ static struct platform_device *real6410_devices[] __initdata = {
 	&s3c_device_ohci,
 };
 
-static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
-	.delay			= 10000,
-	.presc			= 49,
-	.oversampling_shift	= 2,
-};
-
 static void __init real6410_map_io(void)
 {
 	u32 tmp;
@@ -300,7 +294,7 @@ static void __init real6410_machine_init(void)
 
 	s3c_fb_set_platdata(&real6410_lcd_pdata);
 	s3c_nand_set_platdata(&real6410_nand_info);
-	s3c24xx_ts_set_platdata(&s3c_ts_platform);
+	s3c24xx_ts_set_platdata(NULL);
 
 	/* configure nCS1 width to 16 bits */
 
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index ecbea92bf83..c5190a50f0d 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -658,12 +658,6 @@ static struct i2c_board_info i2c_devs1[] __initdata = {
 	{ I2C_BOARD_INFO("24c128", 0x57), },	/* Samsung S524AD0XD1 */
 };
 
-static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
-	.delay			= 10000,
-	.presc			= 49,
-	.oversampling_shift	= 2,
-};
-
 /* LCD Backlight data */
 static struct samsung_bl_gpio_info smdk6410_bl_gpio_info = {
 	.no = S3C64XX_GPF(15),
@@ -705,7 +699,7 @@ static void __init smdk6410_machine_init(void)
 
 	samsung_keypad_set_platdata(&smdk6410_keypad_data);
 
-	s3c24xx_ts_set_platdata(&s3c_ts_platform);
+	s3c24xx_ts_set_platdata(NULL);
 
 	/* configure nCS1 width to 16 bits */
 
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c
index 346f8dfa6f3..340f30f4a3d 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6440.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c
@@ -129,12 +129,6 @@ static struct i2c_board_info smdk6440_i2c_devs1[] __initdata = {
 	/* To be populated */
 };
 
-static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
-	.delay			= 10000,
-	.presc			= 49,
-	.oversampling_shift	= 2,
-};
-
 /* LCD Backlight data */
 static struct samsung_bl_gpio_info smdk6440_bl_gpio_info = {
 	.no = S5P6440_GPF(15),
@@ -155,7 +149,7 @@ static void __init smdk6440_map_io(void)
 
 static void __init smdk6440_machine_init(void)
 {
-	s3c24xx_ts_set_platdata(&s3c_ts_platform);
+	s3c24xx_ts_set_platdata(NULL);
 
 	s3c_i2c0_set_platdata(&s5p6440_i2c0_data);
 	s3c_i2c1_set_platdata(&s5p6440_i2c1_data);
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
index 33f2adf8f3f..ee0da14665b 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6450.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c
@@ -148,12 +148,6 @@ static struct i2c_board_info smdk6450_i2c_devs1[] __initdata = {
 	{ I2C_BOARD_INFO("24c128", 0x57), },/* Samsung S524AD0XD1 EEPROM */
 };
 
-static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
-	.delay			= 10000,
-	.presc			= 49,
-	.oversampling_shift	= 2,
-};
-
 /* LCD Backlight data */
 static struct samsung_bl_gpio_info smdk6450_bl_gpio_info = {
 	.no = S5P6450_GPF(15),
@@ -174,7 +168,7 @@ static void __init smdk6450_map_io(void)
 
 static void __init smdk6450_machine_init(void)
 {
-	s3c24xx_ts_set_platdata(&s3c_ts_platform);
+	s3c24xx_ts_set_platdata(NULL);
 
 	s3c_i2c0_set_platdata(&s5p6450_i2c0_data);
 	s3c_i2c1_set_platdata(&s5p6450_i2c1_data);
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index 227d8908aab..0b70762ebf1 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -203,12 +203,6 @@ static struct platform_device *smdkc100_devices[] __initdata = {
 	&s5pc100_device_spdif,
 };
 
-static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
-	.delay			= 10000,
-	.presc			= 49,
-	.oversampling_shift	= 2,
-};
-
 /* LCD Backlight data */
 static struct samsung_bl_gpio_info smdkc100_bl_gpio_info = {
 	.no = S5PC100_GPD(0),
@@ -228,7 +222,7 @@ static void __init smdkc100_map_io(void)
 
 static void __init smdkc100_machine_init(void)
 {
-	s3c24xx_ts_set_platdata(&s3c_ts_platform);
+	s3c24xx_ts_set_platdata(NULL);
 
 	/* I2C */
 	s3c_i2c0_set_platdata(NULL);
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index 5e011fc6720..4b27bcaf676 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -265,12 +265,6 @@ static struct i2c_board_info smdkv210_i2c_devs2[] __initdata = {
 	/* To Be Updated */
 };
 
-static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
-	.delay			= 10000,
-	.presc			= 49,
-	.oversampling_shift	= 2,
-};
-
 /* LCD Backlight data */
 static struct samsung_bl_gpio_info smdkv210_bl_gpio_info = {
 	.no = S5PV210_GPD0(3),
@@ -296,7 +290,7 @@ static void __init smdkv210_machine_init(void)
 	smdkv210_dm9000_init();
 
 	samsung_keypad_set_platdata(&smdkv210_keypad_data);
-	s3c24xx_ts_set_platdata(&s3c_ts_platform);
+	s3c24xx_ts_set_platdata(NULL);
 
 	s3c_i2c0_set_platdata(NULL);
 	s3c_i2c1_set_platdata(NULL);
diff --git a/arch/arm/plat-samsung/dev-ts.c b/arch/arm/plat-samsung/dev-ts.c
index 82543f0248a..5f3d46a9bd8 100644
--- a/arch/arm/plat-samsung/dev-ts.c
+++ b/arch/arm/plat-samsung/dev-ts.c
@@ -43,8 +43,17 @@ struct platform_device s3c_device_ts = {
 	.resource	= s3c_ts_resource,
 };
 
+static struct s3c2410_ts_mach_info default_ts_data __initdata = {
+	.delay			= 10000,
+	.presc			= 49,
+	.oversampling_shift	= 2,
+};
+
 void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd)
 {
+	if (!pd)
+		pd = &default_ts_data;
+
 	s3c_set_platdata(pd, sizeof(struct s3c2410_ts_mach_info),
 			 &s3c_device_ts);
 }
-- 
cgit v1.2.3-18-g5258


From 481411568062e1ab4424e6021e9ec500eaefc4ac Mon Sep 17 00:00:00 2001
From: Jonghwan Choi <jhbird.choi@samsung.com>
Date: Tue, 23 Aug 2011 16:08:06 +0900
Subject: ARM: S5P: Remove duplicate kdiv calculation

Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/plat-s5p/include/plat/pll.h | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-s5p/include/plat/pll.h
index bf28fadee7a..ebc142c5c84 100644
--- a/arch/arm/plat-s5p/include/plat/pll.h
+++ b/arch/arm/plat-s5p/include/plat/pll.h
@@ -72,7 +72,6 @@ static inline unsigned long s5p_get_pll46xx(unsigned long baseclk,
 	mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK;
 	pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK;
 	sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK;
-	kdiv = pll_con1 & PLL46XX_KDIV_MASK;
 
 	if (pll_type == pll_4650c)
 		kdiv = pll_con1 & PLL4650C_KDIV_MASK;
-- 
cgit v1.2.3-18-g5258


From bbcdad52a4733435c239cb4e829f35d9abc2e06a Mon Sep 17 00:00:00 2001
From: Kukjin Kim <kgene.kim@samsung.com>
Date: Fri, 26 Aug 2011 10:59:50 +0900
Subject: ARM: S3C24XX: remove unused gpio codes

Cc: Ben Dooks <ben-linux@fluff.org>
[kgene.kim@samsung.com: fix build error]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c2410/Kconfig  |  6 ----
 arch/arm/mach-s3c2410/Makefile |  1 -
 arch/arm/mach-s3c2410/gpio.c   | 72 ------------------------------------------
 arch/arm/mach-s3c2412/Kconfig  |  1 -
 arch/arm/mach-s3c2412/Makefile |  1 -
 arch/arm/mach-s3c2412/gpio.c   | 62 ------------------------------------
 arch/arm/mach-s3c2440/Kconfig  |  2 --
 7 files changed, 145 deletions(-)
 delete mode 100644 arch/arm/mach-s3c2410/gpio.c
 delete mode 100644 arch/arm/mach-s3c2412/gpio.c

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 7245a55795d..3700cf32af0 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -8,7 +8,6 @@ config CPU_S3C2410
 	select CPU_ARM920T
 	select S3C_GPIO_PULL_UP
 	select S3C2410_CLOCK
-	select S3C2410_GPIO
 	select CPU_LLSERIAL_S3C2410
 	select S3C2410_PM if PM
 	select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
@@ -28,11 +27,6 @@ config S3C2410_PM
 	help
 	  Power Management code common to S3C2410 and better
 
-config S3C2410_GPIO
-	bool
-	help
-	  GPIO code for S3C2410 and similar processors
-
 config SIMTEC_NOR
 	bool
 	help
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 81695353d8f..782fd81144e 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -13,7 +13,6 @@ obj-$(CONFIG_CPU_S3C2410)	+= s3c2410.o
 obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C2410_PM)	+= pm.o sleep.o
-obj-$(CONFIG_S3C2410_GPIO)	+= gpio.o
 obj-$(CONFIG_S3C2410_CPUFREQ)	+= cpu-freq.o
 obj-$(CONFIG_S3C2410_PLLTABLE)	+= pll.o
 
diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c
deleted file mode 100644
index 9664e011dae..00000000000
--- a/arch/arm/mach-s3c2410/gpio.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/gpio.c
- *
- * Copyright (c) 2004-2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 GPIO support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/gpio-fns.h>
-#include <asm/irq.h>
-
-#include <mach/regs-gpio.h>
-
-int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
-			   unsigned int config)
-{
-	void __iomem *reg = S3C24XX_EINFLT0;
-	unsigned long flags;
-	unsigned long val;
-
-	if (pin < S3C2410_GPG(8) || pin > S3C2410_GPG(15))
-		return -EINVAL;
-
-	config &= 0xff;
-
-	pin -= S3C2410_GPG(8);
-	reg += pin & ~3;
-
-	local_irq_save(flags);
-
-	/* update filter width and clock source */
-
-	val = __raw_readl(reg);
-	val &= ~(0xff << ((pin & 3) * 8));
-	val |= config << ((pin & 3) * 8);
-	__raw_writel(val, reg);
-
-	/* update filter enable */
-
-	val = __raw_readl(S3C24XX_EXTINT2);
-	val &= ~(1 << ((pin * 4) + 3));
-	val |= on << ((pin * 4) + 3);
-	__raw_writel(val, S3C24XX_EXTINT2);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_irqfilter);
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index c2cf4e56998..b8b9029e9f2 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -9,7 +9,6 @@ config CPU_S3C2412
 	select CPU_LLSERIAL_S3C2440
 	select S3C2412_PM if PM
 	select S3C2412_DMA if S3C2410_DMA
-	select S3C2410_GPIO
 	help
 	  Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
 
diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile
index 6c48a91ea39..7e4d95fa8a9 100644
--- a/arch/arm/mach-s3c2412/Makefile
+++ b/arch/arm/mach-s3c2412/Makefile
@@ -12,7 +12,6 @@ obj-				:=
 obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o
 obj-$(CONFIG_CPU_S3C2412)	+= irq.o
 obj-$(CONFIG_CPU_S3C2412)	+= clock.o
-obj-$(CONFIG_CPU_S3C2412)	+= gpio.o
 obj-$(CONFIG_S3C2412_DMA)	+= dma.o
 obj-$(CONFIG_S3C2412_PM)	+= pm.o
 obj-$(CONFIG_S3C2412_PM_SLEEP)	+= sleep.o
diff --git a/arch/arm/mach-s3c2412/gpio.c b/arch/arm/mach-s3c2412/gpio.c
deleted file mode 100644
index 3404a876b33..00000000000
--- a/arch/arm/mach-s3c2412/gpio.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* linux/arch/arm/mach-s3c2412/gpio.c
- *
- * Copyright (c) 2007 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * http://armlinux.simtec.co.uk/.
- *
- * S3C2412/S3C2413 specific GPIO support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/hardware.h>
-
-#include <plat/gpio-core.h>
-
-int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state)
-{
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
-	unsigned long offs = pin - chip->chip.base;
-	unsigned long flags;
-	unsigned long slpcon;
-
-	offs *= 2;
-
-	if (pin < S3C2410_GPB(0))
-		return -EINVAL;
-
-	if (pin >= S3C2410_GPF(0) &&
-	    pin <= S3C2410_GPG(16))
-		return -EINVAL;
-
-	if (pin > S3C2410_GPH(16))
-		return -EINVAL;
-
-	local_irq_save(flags);
-
-	slpcon = __raw_readl(chip->base + 0x0C);
-
-	slpcon &= ~(3 << offs);
-	slpcon |= state << offs;
-
-	__raw_writel(slpcon, chip->base + 0x0C);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2412_gpio_set_sleepcfg);
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 50825a3f91c..c461fb8e15c 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -8,7 +8,6 @@ config CPU_S3C2440
 	select S3C_GPIO_PULL_UP
 	select S3C2410_CLOCK
 	select S3C2410_PM if PM
-	select S3C2410_GPIO
 	select S3C2440_DMA if S3C2410_DMA
 	select CPU_S3C244X
 	select CPU_LLSERIAL_S3C2440
@@ -20,7 +19,6 @@ config CPU_S3C2442
 	select CPU_ARM920T
 	select S3C_GPIO_PULL_DOWN
 	select S3C2410_CLOCK
-	select S3C2410_GPIO
 	select S3C2410_PM if PM
 	select CPU_S3C244X
 	select CPU_LLSERIAL_S3C2440
-- 
cgit v1.2.3-18-g5258


From 684653842b65b98538e5d6198998e68c879bd45e Mon Sep 17 00:00:00 2001
From: Kukjin Kim <kgene.kim@samsung.com>
Date: Wed, 24 Aug 2011 17:25:09 +0900
Subject: ARM: EXYNOS4: Add support new EXYNOS4212 SoC

This patch adds Samsung EXYNOS4212 SoC support.
The EXYNOS4212 integrates a ARM Cortex A9 multi-core.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/Kconfig            | 5 +++++
 arch/arm/mach-exynos4/Makefile           | 6 ++++--
 arch/arm/mach-exynos4/cpu.c              | 6 +++++-
 arch/arm/plat-s5p/cpu.c                  | 9 +++++++++
 arch/arm/plat-s5p/include/plat/exynos4.h | 3 +--
 arch/arm/plat-samsung/include/plat/cpu.h | 8 ++++++++
 6 files changed, 32 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index bee8f77de2a..0b40289d4f7 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -15,6 +15,11 @@ config CPU_EXYNOS4210
 	help
 	  Enable EXYNOS4210 CPU support
 
+config SOC_EXYNOS4212
+	bool
+	help
+	  Enable EXYNOS4212 SoC support
+
 config EXYNOS4_MCT
 	bool
 	default y
diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile
index e3e93ea4138..46244576452 100644
--- a/arch/arm/mach-exynos4/Makefile
+++ b/arch/arm/mach-exynos4/Makefile
@@ -12,8 +12,10 @@ obj-				:=
 
 # Core support for EXYNOS4 system
 
-obj-$(CONFIG_CPU_EXYNOS4210)	+= cpu.o init.o clock.o irq-combiner.o
-obj-$(CONFIG_CPU_EXYNOS4210)	+= setup-i2c0.o irq-eint.o dma.o pmu.o
+obj-$(CONFIG_ARCH_EXYNOS4)	+= cpu.o init.o clock.o irq-combiner.o
+obj-$(CONFIG_ARCH_EXYNOS4)	+= setup-i2c0.o irq-eint.o dma.o pmu.o
+obj-$(CONFIG_CPU_EXYNOS4210)	+= clock-exynos4210.o
+obj-$(CONFIG_SOC_EXYNOS4212)	+= clock-exynos4212.o
 obj-$(CONFIG_PM)		+= pm.o sleep.o
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 
diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c
index 0d281bbe345..1e1a7a9d2ae 100644
--- a/arch/arm/mach-exynos4/cpu.c
+++ b/arch/arm/mach-exynos4/cpu.c
@@ -241,7 +241,11 @@ static int __init exynos4_l2x0_cache_init(void)
 {
 	/* TAG, Data Latency Control: 2cycle */
 	__raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL);
-	__raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
+
+	if (soc_is_exynos4210())
+		__raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
+	else if (soc_is_exynos4212())
+		__raw_writel(0x120, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
 
 	/* L2X0 Prefetch Control */
 	__raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL);
diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c
index 04392c70d05..909507bae2f 100644
--- a/arch/arm/plat-s5p/cpu.c
+++ b/arch/arm/plat-s5p/cpu.c
@@ -33,6 +33,7 @@ static const char name_s5p6450[] = "S5P6450";
 static const char name_s5pc100[] = "S5PC100";
 static const char name_s5pv210[] = "S5PV210/S5PC110";
 static const char name_exynos4210[] = "EXYNOS4210";
+static const char name_exynos4212[] = "EXYNOS4212";
 
 static struct cpu_table cpu_ids[] __initdata = {
 	{
@@ -75,6 +76,14 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.init_uarts	= exynos4_init_uarts,
 		.init		= exynos4_init,
 		.name		= name_exynos4210,
+	}, {
+		.idcode		= EXYNOS4212_CPU_ID,
+		.idmask		= EXYNOS4_CPU_MASK,
+		.map_io		= exynos4_map_io,
+		.init_clocks	= exynos4_init_clocks,
+		.init_uarts	= exynos4_init_uarts,
+		.init		= exynos4_init,
+		.name		= name_exynos4212,
 	},
 };
 
diff --git a/arch/arm/plat-s5p/include/plat/exynos4.h b/arch/arm/plat-s5p/include/plat/exynos4.h
index 907caab53dc..4aed1305df5 100644
--- a/arch/arm/plat-s5p/include/plat/exynos4.h
+++ b/arch/arm/plat-s5p/include/plat/exynos4.h
@@ -16,8 +16,7 @@ extern void exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 extern void exynos4_register_clocks(void);
 extern void exynos4_setup_clocks(void);
 
-#ifdef CONFIG_CPU_EXYNOS4210
-
+#ifdef CONFIG_ARCH_EXYNOS4
 extern  int exynos4_init(void);
 extern void exynos4_init_irq(void);
 extern void exynos4_map_io(void);
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index efd920ec3b7..1bbbbb420be 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -39,6 +39,7 @@ extern unsigned long samsung_cpu_id;
 #define S5PV210_CPU_MASK	0xFFFFF000
 
 #define EXYNOS4210_CPU_ID	0x43210000
+#define EXYNOS4212_CPU_ID	0x43220000
 #define EXYNOS4_CPU_MASK	0xFFFE0000
 
 #define IS_SAMSUNG_CPU(name, id, mask)		\
@@ -54,6 +55,7 @@ IS_SAMSUNG_CPU(s5p6450, S5P6450_CPU_ID, S5P64XX_CPU_MASK)
 IS_SAMSUNG_CPU(s5pc100, S5PC100_CPU_ID, S5PC100_CPU_MASK)
 IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK)
 IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
 
 #if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
     defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \
@@ -100,6 +102,12 @@ IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
 # define soc_is_exynos4210()	0
 #endif
 
+#if defined(CONFIG_SOC_EXYNOS4212)
+# define soc_is_exynos4212()	is_samsung_exynos4212()
+#else
+# define soc_is_exynos4212()	0
+#endif
+
 #define EXYNOS4210_REV_0	(0x0)
 #define EXYNOS4210_REV_1_0	(0x10)
 #define EXYNOS4210_REV_1_1	(0x11)
-- 
cgit v1.2.3-18-g5258


From 2bc02c0daae146283ce1b20da6864a27c848812e Mon Sep 17 00:00:00 2001
From: Kukjin Kim <kgene.kim@samsung.com>
Date: Wed, 24 Aug 2011 17:25:09 +0900
Subject: ARM: EXYNOS4: Add support clock for EXYNOS4212

This patch splits EXYNOS4 clock code to EXYNOS4 common,
EXYNOS4210 and EXYNOS4212 for supporting new EXYNOS4212
SoC with one kernel image. Of course, this patch adds
some clock codes for EXYNOS4212 SoC.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/clock-exynos4210.c           | 101 ++++++++++++++++
 arch/arm/mach-exynos4/clock-exynos4212.c           |  84 ++++++++++++++
 arch/arm/mach-exynos4/clock.c                      | 127 +++++++++------------
 arch/arm/mach-exynos4/cpu.c                        |   6 +
 arch/arm/mach-exynos4/include/mach/exynos4-clock.h |  43 +++++++
 arch/arm/mach-exynos4/include/mach/regs-clock.h    |  50 +++++---
 arch/arm/plat-s5p/include/plat/exynos4.h           |   2 +
 arch/arm/plat-s5p/include/plat/pll.h               |  55 ++++++++-
 8 files changed, 377 insertions(+), 91 deletions(-)
 create mode 100644 arch/arm/mach-exynos4/clock-exynos4210.c
 create mode 100644 arch/arm/mach-exynos4/clock-exynos4212.c
 create mode 100644 arch/arm/mach-exynos4/include/mach/exynos4-clock.h

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/clock-exynos4210.c b/arch/arm/mach-exynos4/clock-exynos4210.c
new file mode 100644
index 00000000000..fe74b9179fe
--- /dev/null
+++ b/arch/arm/mach-exynos4/clock-exynos4210.c
@@ -0,0 +1,101 @@
+/*
+ * linux/arch/arm/mach-exynos4/clock-exynos4210.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * EXYNOS4210 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/exynos4.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/exynos4-clock.h>
+
+static struct clksrc_clk *sysclks[] = {
+	/* nothing here yet */
+};
+
+static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable);
+}
+
+static struct clksrc_clk clksrcs[] = {
+	{
+		.clk		= {
+			.name		= "sclk_sata",
+			.id		= -1,
+			.enable		= exynos4_clksrc_mask_fsys_ctrl,
+			.ctrlbit	= (1 << 24),
+		},
+		.sources = &clkset_mout_corebus,
+		.reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 24, .size = 1 },
+		.reg_div = { .reg = S5P_CLKDIV_FSYS0, .shift = 20, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_fimd",
+			.devname	= "exynos4-fb.1",
+			.enable		= exynos4_clksrc_mask_lcd1_ctrl,
+			.ctrlbit	= (1 << 0),
+		},
+		.sources = &clkset_group,
+		.reg_src = { .reg = S5P_CLKSRC_LCD1, .shift = 0, .size = 4 },
+		.reg_div = { .reg = S5P_CLKDIV_LCD1, .shift = 0, .size = 4 },
+	},
+};
+
+static struct clk init_clocks_off[] = {
+	{
+		.name		= "sataphy",
+		.id		= -1,
+		.parent		= &clk_aclk_133.clk,
+		.enable		= exynos4_clk_ip_fsys_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "sata",
+		.id		= -1,
+		.parent		= &clk_aclk_133.clk,
+		.enable		= exynos4_clk_ip_fsys_ctrl,
+		.ctrlbit	= (1 << 10),
+	}, {
+		.name		= "fimd",
+		.devname	= "exynos4-fb.1",
+		.enable		= exynos4_clk_ip_lcd1_ctrl,
+		.ctrlbit	= (1 << 0),
+	},
+};
+
+void __init exynos4210_register_clocks(void)
+{
+	int ptr;
+
+	clk_mout_mpll.reg_src.reg = S5P_CLKSRC_CPU;
+	clk_mout_mpll.reg_src.shift = 8;
+	clk_mout_mpll.reg_src.size = 1;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+		s3c_register_clksrc(sysclks[ptr], 1);
+
+	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+
+	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+}
diff --git a/arch/arm/mach-exynos4/clock-exynos4212.c b/arch/arm/mach-exynos4/clock-exynos4212.c
new file mode 100644
index 00000000000..5a47a3f0dfe
--- /dev/null
+++ b/arch/arm/mach-exynos4/clock-exynos4212.c
@@ -0,0 +1,84 @@
+/*
+ * linux/arch/arm/mach-exynos4/clock-exynos4212.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * EXYNOS4212 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/exynos4.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/exynos4-clock.h>
+
+static struct clk *clk_src_mpll_user_list[] = {
+	[0] = &clk_fin_mpll,
+	[1] = &clk_mout_mpll.clk,
+};
+
+static struct clksrc_sources clk_src_mpll_user = {
+	.sources	= clk_src_mpll_user_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mpll_user_list),
+};
+
+static struct clksrc_clk clk_mout_mpll_user = {
+	.clk = {
+		.name		= "mout_mpll_user",
+	},
+	.sources	= &clk_src_mpll_user,
+	.reg_src	= { .reg = S5P_CLKSRC_CPU, .shift = 24, .size = 1 },
+};
+
+static struct clksrc_clk *sysclks[] = {
+	&clk_mout_mpll_user,
+};
+
+static struct clksrc_clk clksrcs[] = {
+	/* nothing here yet */
+};
+
+static struct clk init_clocks_off[] = {
+	/* nothing here yet */
+};
+
+void __init exynos4212_register_clocks(void)
+{
+	int ptr;
+
+	/* usbphy1 is removed */
+	clkset_group_list[4] = NULL;
+
+	/* mout_mpll_user is used */
+	clkset_group_list[6] = &clk_mout_mpll_user.clk;
+	clkset_aclk_top_list[0] = &clk_mout_mpll_user.clk;
+
+	clk_mout_mpll.reg_src.reg = S5P_CLKSRC_DMC;
+	clk_mout_mpll.reg_src.shift = 12;
+	clk_mout_mpll.reg_src.size = 1;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+		s3c_register_clksrc(sysclks[ptr], 1);
+
+	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+
+	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+}
diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos4/clock.c
index 79d6cd0c8e7..eb99467d676 100644
--- a/arch/arm/mach-exynos4/clock.c
+++ b/arch/arm/mach-exynos4/clock.c
@@ -20,26 +20,28 @@
 #include <plat/pll.h>
 #include <plat/s5p-clock.h>
 #include <plat/clock-clksrc.h>
+#include <plat/exynos4.h>
 
 #include <mach/map.h>
 #include <mach/regs-clock.h>
 #include <mach/sysmmu.h>
+#include <mach/exynos4-clock.h>
 
-static struct clk clk_sclk_hdmi27m = {
+struct clk clk_sclk_hdmi27m = {
 	.name		= "sclk_hdmi27m",
 	.rate		= 27000000,
 };
 
-static struct clk clk_sclk_hdmiphy = {
+struct clk clk_sclk_hdmiphy = {
 	.name		= "sclk_hdmiphy",
 };
 
-static struct clk clk_sclk_usbphy0 = {
+struct clk clk_sclk_usbphy0 = {
 	.name		= "sclk_usbphy0",
 	.rate		= 27000000,
 };
 
-static struct clk clk_sclk_usbphy1 = {
+struct clk clk_sclk_usbphy1 = {
 	.name		= "sclk_usbphy1",
 };
 
@@ -58,12 +60,7 @@ static int exynos4_clksrc_mask_lcd0_ctrl(struct clk *clk, int enable)
 	return s5p_gatectrl(S5P_CLKSRC_MASK_LCD0, clk, enable);
 }
 
-static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable);
-}
-
-static int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
+int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
 {
 	return s5p_gatectrl(S5P_CLKSRC_MASK_FSYS, clk, enable);
 }
@@ -103,12 +100,12 @@ static int exynos4_clk_ip_lcd0_ctrl(struct clk *clk, int enable)
 	return s5p_gatectrl(S5P_CLKGATE_IP_LCD0, clk, enable);
 }
 
-static int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable)
+int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable)
 {
 	return s5p_gatectrl(S5P_CLKGATE_IP_LCD1, clk, enable);
 }
 
-static int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable)
+int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable)
 {
 	return s5p_gatectrl(S5P_CLKGATE_IP_FSYS, clk, enable);
 }
@@ -133,7 +130,7 @@ static struct clksrc_clk clk_mout_apll = {
 	.reg_src	= { .reg = S5P_CLKSRC_CPU, .shift = 0, .size = 1 },
 };
 
-static struct clksrc_clk clk_sclk_apll = {
+struct clksrc_clk clk_sclk_apll = {
 	.clk	= {
 		.name		= "sclk_apll",
 		.parent		= &clk_mout_apll.clk,
@@ -141,7 +138,7 @@ static struct clksrc_clk clk_sclk_apll = {
 	.reg_div	= { .reg = S5P_CLKDIV_CPU, .shift = 24, .size = 3 },
 };
 
-static struct clksrc_clk clk_mout_epll = {
+struct clksrc_clk clk_mout_epll = {
 	.clk	= {
 		.name		= "mout_epll",
 	},
@@ -149,12 +146,13 @@ static struct clksrc_clk clk_mout_epll = {
 	.reg_src	= { .reg = S5P_CLKSRC_TOP0, .shift = 4, .size = 1 },
 };
 
-static struct clksrc_clk clk_mout_mpll = {
+struct clksrc_clk clk_mout_mpll = {
 	.clk = {
 		.name		= "mout_mpll",
 	},
 	.sources	= &clk_src_mpll,
-	.reg_src	= { .reg = S5P_CLKSRC_CPU, .shift = 8, .size = 1 },
+
+	/* reg_src will be added in each SoCs' clock */
 };
 
 static struct clk *clkset_moutcore_list[] = {
@@ -224,12 +222,12 @@ static struct clksrc_clk clk_periphclk = {
 
 /* Core list of CMU_CORE side */
 
-static struct clk *clkset_corebus_list[] = {
+struct clk *clkset_corebus_list[] = {
 	[0] = &clk_mout_mpll.clk,
 	[1] = &clk_sclk_apll.clk,
 };
 
-static struct clksrc_sources clkset_mout_corebus = {
+struct clksrc_sources clkset_mout_corebus = {
 	.sources	= clkset_corebus_list,
 	.nr_sources	= ARRAY_SIZE(clkset_corebus_list),
 };
@@ -284,12 +282,12 @@ static struct clksrc_clk clk_pclk_acp = {
 
 /* Core list of CMU_TOP side */
 
-static struct clk *clkset_aclk_top_list[] = {
+struct clk *clkset_aclk_top_list[] = {
 	[0] = &clk_mout_mpll.clk,
 	[1] = &clk_sclk_apll.clk,
 };
 
-static struct clksrc_sources clkset_aclk = {
+struct clksrc_sources clkset_aclk = {
 	.sources	= clkset_aclk_top_list,
 	.nr_sources	= ARRAY_SIZE(clkset_aclk_top_list),
 };
@@ -321,7 +319,7 @@ static struct clksrc_clk clk_aclk_160 = {
 	.reg_div	= { .reg = S5P_CLKDIV_TOP, .shift = 8, .size = 3 },
 };
 
-static struct clksrc_clk clk_aclk_133 = {
+struct clksrc_clk clk_aclk_133 = {
 	.clk	= {
 		.name		= "aclk_133",
 	},
@@ -360,7 +358,7 @@ static struct clksrc_sources clkset_sclk_vpll = {
 	.nr_sources	= ARRAY_SIZE(clkset_sclk_vpll_list),
 };
 
-static struct clksrc_clk clk_sclk_vpll = {
+struct clksrc_clk clk_sclk_vpll = {
 	.clk	= {
 		.name		= "sclk_vpll",
 	},
@@ -409,16 +407,6 @@ static struct clk init_clocks_off[] = {
 		.devname	= "exynos4-fb.0",
 		.enable		= exynos4_clk_ip_lcd0_ctrl,
 		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "fimd",
-		.devname	= "exynos4-fb.1",
-		.enable		= exynos4_clk_ip_lcd1_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "sataphy",
-		.parent		= &clk_aclk_133.clk,
-		.enable		= exynos4_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 3),
 	}, {
 		.name		= "hsmmc",
 		.devname	= "s3c-sdhci.0",
@@ -448,11 +436,6 @@ static struct clk init_clocks_off[] = {
 		.parent		= &clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 9),
-	}, {
-		.name		= "sata",
-		.parent		= &clk_aclk_133.clk,
-		.enable		= exynos4_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 10),
 	}, {
 		.name		= "pdma",
 		.devname	= "s3c-pl330.0",
@@ -673,7 +656,7 @@ static struct clk init_clocks[] = {
 	}
 };
 
-static struct clk *clkset_group_list[] = {
+struct clk *clkset_group_list[] = {
 	[0] = &clk_ext_xtal_mux,
 	[1] = &clk_xusbxti,
 	[2] = &clk_sclk_hdmi27m,
@@ -685,7 +668,7 @@ static struct clk *clkset_group_list[] = {
 	[8] = &clk_sclk_vpll.clk,
 };
 
-static struct clksrc_sources clkset_group = {
+struct clksrc_sources clkset_group = {
 	.sources	= clkset_group_list,
 	.nr_sources	= ARRAY_SIZE(clkset_group_list),
 };
@@ -967,25 +950,6 @@ static struct clksrc_clk clksrcs[] = {
 		.sources = &clkset_group,
 		.reg_src = { .reg = S5P_CLKSRC_LCD0, .shift = 0, .size = 4 },
 		.reg_div = { .reg = S5P_CLKDIV_LCD0, .shift = 0, .size = 4 },
-	}, {
-		.clk		= {
-			.name		= "sclk_fimd",
-			.devname	= "exynos4-fb.1",
-			.enable		= exynos4_clksrc_mask_lcd1_ctrl,
-			.ctrlbit	= (1 << 0),
-		},
-		.sources = &clkset_group,
-		.reg_src = { .reg = S5P_CLKSRC_LCD1, .shift = 0, .size = 4 },
-		.reg_div = { .reg = S5P_CLKDIV_LCD1, .shift = 0, .size = 4 },
-	}, {
-		.clk		= {
-			.name		= "sclk_sata",
-			.enable		= exynos4_clksrc_mask_fsys_ctrl,
-			.ctrlbit	= (1 << 24),
-		},
-		.sources = &clkset_mout_corebus,
-		.reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 24, .size = 1 },
-		.reg_div = { .reg = S5P_CLKDIV_FSYS0, .shift = 20, .size = 4 },
 	}, {
 		.clk		= {
 			.name		= "sclk_spi",
@@ -1116,7 +1080,13 @@ static int xtal_rate;
 
 static unsigned long exynos4_fout_apll_get_rate(struct clk *clk)
 {
-	return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0), pll_4508);
+	if (soc_is_exynos4210())
+		return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0),
+					pll_4508);
+	else if (soc_is_exynos4212())
+		return s5p_get_pll35xx(xtal_rate, __raw_readl(S5P_APLL_CON0));
+	else
+		return 0;
 }
 
 static struct clk_ops exynos4_fout_apll_ops = {
@@ -1126,10 +1096,10 @@ static struct clk_ops exynos4_fout_apll_ops = {
 void __init_or_cpufreq exynos4_setup_clocks(void)
 {
 	struct clk *xtal_clk;
-	unsigned long apll;
-	unsigned long mpll;
-	unsigned long epll;
-	unsigned long vpll;
+	unsigned long apll = 0;
+	unsigned long mpll = 0;
+	unsigned long epll = 0;
+	unsigned long vpll = 0;
 	unsigned long vpllsrc;
 	unsigned long xtal;
 	unsigned long armclk;
@@ -1153,14 +1123,29 @@ void __init_or_cpufreq exynos4_setup_clocks(void)
 
 	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
 
-	apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0), pll_4508);
-	mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0), pll_4508);
-	epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0),
-				__raw_readl(S5P_EPLL_CON1), pll_4600);
-
-	vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
-	vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
-				__raw_readl(S5P_VPLL_CON1), pll_4650c);
+	if (soc_is_exynos4210()) {
+		apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0),
+					pll_4508);
+		mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0),
+					pll_4508);
+		epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0),
+					__raw_readl(S5P_EPLL_CON1), pll_4600);
+
+		vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
+		vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
+					__raw_readl(S5P_VPLL_CON1), pll_4650c);
+	} else if (soc_is_exynos4212()) {
+		apll = s5p_get_pll35xx(xtal, __raw_readl(S5P_APLL_CON0));
+		mpll = s5p_get_pll35xx(xtal, __raw_readl(S5P_MPLL_CON0));
+		epll = s5p_get_pll36xx(xtal, __raw_readl(S5P_EPLL_CON0),
+					__raw_readl(S5P_EPLL_CON1));
+
+		vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
+		vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
+					__raw_readl(S5P_VPLL_CON1));
+	} else {
+		/* nothing */
+	}
 
 	clk_fout_apll.ops = &exynos4_fout_apll_ops;
 	clk_fout_mpll.rate = mpll;
diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c
index 1e1a7a9d2ae..02ec52a9927 100644
--- a/arch/arm/mach-exynos4/cpu.c
+++ b/arch/arm/mach-exynos4/cpu.c
@@ -188,6 +188,12 @@ void __init exynos4_init_clocks(int xtal)
 
 	s3c24xx_register_baseclocks(xtal);
 	s5p_register_clocks(xtal);
+
+	if (soc_is_exynos4210())
+		exynos4210_register_clocks();
+	else if (soc_is_exynos4212())
+		exynos4212_register_clocks();
+
 	exynos4_register_clocks();
 	exynos4_setup_clocks();
 }
diff --git a/arch/arm/mach-exynos4/include/mach/exynos4-clock.h b/arch/arm/mach-exynos4/include/mach/exynos4-clock.h
new file mode 100644
index 00000000000..a07fcbf5525
--- /dev/null
+++ b/arch/arm/mach-exynos4/include/mach/exynos4-clock.h
@@ -0,0 +1,43 @@
+/*
+ * linux/arch/arm/mach-exynos4/include/mach/exynos4-clock.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Header file for exynos4 clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_CLOCK_H
+#define __ASM_ARCH_CLOCK_H __FILE__
+
+#include <linux/clk.h>
+
+extern struct clk clk_sclk_hdmi27m;
+extern struct clk clk_sclk_usbphy0;
+extern struct clk clk_sclk_usbphy1;
+extern struct clk clk_sclk_hdmiphy;
+
+extern struct clksrc_clk clk_sclk_apll;
+extern struct clksrc_clk clk_mout_mpll;
+extern struct clksrc_clk clk_aclk_133;
+extern struct clksrc_clk clk_mout_epll;
+extern struct clksrc_clk clk_sclk_vpll;
+
+extern struct clk *clkset_corebus_list[];
+extern struct clksrc_sources clkset_mout_corebus;
+
+extern struct clk *clkset_aclk_top_list[];
+extern struct clksrc_sources clkset_aclk;
+
+extern struct clk *clkset_group_list[];
+extern struct clksrc_sources clkset_group;
+
+extern int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable);
+extern int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable);
+extern int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable);
+
+#endif /* __ASM_ARCH_CLOCK_H */
diff --git a/arch/arm/mach-exynos4/include/mach/regs-clock.h b/arch/arm/mach-exynos4/include/mach/regs-clock.h
index d493fdb422f..e75d0f83864 100644
--- a/arch/arm/mach-exynos4/include/mach/regs-clock.h
+++ b/arch/arm/mach-exynos4/include/mach/regs-clock.h
@@ -13,6 +13,7 @@
 #ifndef __ASM_ARCH_REGS_CLOCK_H
 #define __ASM_ARCH_REGS_CLOCK_H __FILE__
 
+#include <plat/cpu.h>
 #include <mach/map.h>
 
 #define S5P_CLKREG(x)			(S5P_VA_CMU + (x))
@@ -41,12 +42,20 @@
 #define S5P_CLKSRC_G3D			S5P_CLKREG(0x0C22C)
 #define S5P_CLKSRC_IMAGE		S5P_CLKREG(0x0C230)
 #define S5P_CLKSRC_LCD0			S5P_CLKREG(0x0C234)
-#define S5P_CLKSRC_LCD1			S5P_CLKREG(0x0C238)
 #define S5P_CLKSRC_MAUDIO		S5P_CLKREG(0x0C23C)
 #define S5P_CLKSRC_FSYS			S5P_CLKREG(0x0C240)
 #define S5P_CLKSRC_PERIL0		S5P_CLKREG(0x0C250)
 #define S5P_CLKSRC_PERIL1		S5P_CLKREG(0x0C254)
 
+#define S5P_CLKSRC_MASK_TOP		S5P_CLKREG(0x0C310)
+#define S5P_CLKSRC_MASK_CAM		S5P_CLKREG(0x0C320)
+#define S5P_CLKSRC_MASK_TV		S5P_CLKREG(0x0C324)
+#define S5P_CLKSRC_MASK_LCD0		S5P_CLKREG(0x0C334)
+#define S5P_CLKSRC_MASK_MAUDIO		S5P_CLKREG(0x0C33C)
+#define S5P_CLKSRC_MASK_FSYS		S5P_CLKREG(0x0C340)
+#define S5P_CLKSRC_MASK_PERIL0		S5P_CLKREG(0x0C350)
+#define S5P_CLKSRC_MASK_PERIL1		S5P_CLKREG(0x0C354)
+
 #define S5P_CLKDIV_TOP			S5P_CLKREG(0x0C510)
 #define S5P_CLKDIV_CAM			S5P_CLKREG(0x0C520)
 #define S5P_CLKDIV_TV			S5P_CLKREG(0x0C524)
@@ -54,7 +63,6 @@
 #define S5P_CLKDIV_G3D			S5P_CLKREG(0x0C52C)
 #define S5P_CLKDIV_IMAGE		S5P_CLKREG(0x0C530)
 #define S5P_CLKDIV_LCD0			S5P_CLKREG(0x0C534)
-#define S5P_CLKDIV_LCD1			S5P_CLKREG(0x0C538)
 #define S5P_CLKDIV_MAUDIO		S5P_CLKREG(0x0C53C)
 #define S5P_CLKDIV_FSYS0		S5P_CLKREG(0x0C540)
 #define S5P_CLKDIV_FSYS1		S5P_CLKREG(0x0C544)
@@ -68,16 +76,6 @@
 #define S5P_CLKDIV_PERIL5		S5P_CLKREG(0x0C564)
 #define S5P_CLKDIV2_RATIO		S5P_CLKREG(0x0C580)
 
-#define S5P_CLKSRC_MASK_TOP		S5P_CLKREG(0x0C310)
-#define S5P_CLKSRC_MASK_CAM		S5P_CLKREG(0x0C320)
-#define S5P_CLKSRC_MASK_TV		S5P_CLKREG(0x0C324)
-#define S5P_CLKSRC_MASK_LCD0		S5P_CLKREG(0x0C334)
-#define S5P_CLKSRC_MASK_LCD1		S5P_CLKREG(0x0C338)
-#define S5P_CLKSRC_MASK_MAUDIO		S5P_CLKREG(0x0C33C)
-#define S5P_CLKSRC_MASK_FSYS		S5P_CLKREG(0x0C340)
-#define S5P_CLKSRC_MASK_PERIL0		S5P_CLKREG(0x0C350)
-#define S5P_CLKSRC_MASK_PERIL1		S5P_CLKREG(0x0C354)
-
 #define S5P_CLKDIV_STAT_TOP		S5P_CLKREG(0x0C610)
 
 #define S5P_CLKGATE_SCLKCAM		S5P_CLKREG(0x0C820)
@@ -85,13 +83,16 @@
 #define S5P_CLKGATE_IP_TV		S5P_CLKREG(0x0C924)
 #define S5P_CLKGATE_IP_MFC		S5P_CLKREG(0x0C928)
 #define S5P_CLKGATE_IP_G3D		S5P_CLKREG(0x0C92C)
-#define S5P_CLKGATE_IP_IMAGE		S5P_CLKREG(0x0C930)
+#define S5P_CLKGATE_IP_IMAGE		(soc_is_exynos4210() ? \
+					S5P_CLKREG(0x0C930) : \
+					S5P_CLKREG(0x04930))
 #define S5P_CLKGATE_IP_LCD0		S5P_CLKREG(0x0C934)
-#define S5P_CLKGATE_IP_LCD1		S5P_CLKREG(0x0C938)
 #define S5P_CLKGATE_IP_FSYS		S5P_CLKREG(0x0C940)
 #define S5P_CLKGATE_IP_GPS		S5P_CLKREG(0x0C94C)
 #define S5P_CLKGATE_IP_PERIL		S5P_CLKREG(0x0C950)
-#define S5P_CLKGATE_IP_PERIR		S5P_CLKREG(0x0C960)
+#define S5P_CLKGATE_IP_PERIR		(soc_is_exynos4210() ? \
+					S5P_CLKREG(0x0C960) : \
+					S5P_CLKREG(0x08960))
 #define S5P_CLKGATE_BLOCK		S5P_CLKREG(0x0C970)
 
 #define S5P_CLKSRC_MASK_DMC		S5P_CLKREG(0x10300)
@@ -102,11 +103,17 @@
 #define S5P_CLKGATE_IP_DMC		S5P_CLKREG(0x10900)
 
 #define S5P_APLL_LOCK			S5P_CLKREG(0x14000)
-#define S5P_MPLL_LOCK			S5P_CLKREG(0x14004)
+#define S5P_MPLL_LOCK			(soc_is_exynos4210() ? \
+					S5P_CLKREG(0x14004) :  \
+					S5P_CLKREG(0x10008))
 #define S5P_APLL_CON0			S5P_CLKREG(0x14100)
 #define S5P_APLL_CON1			S5P_CLKREG(0x14104)
-#define S5P_MPLL_CON0			S5P_CLKREG(0x14108)
-#define S5P_MPLL_CON1			S5P_CLKREG(0x1410C)
+#define S5P_MPLL_CON0			(soc_is_exynos4210() ? \
+					S5P_CLKREG(0x14108) : \
+					S5P_CLKREG(0x10108))
+#define S5P_MPLL_CON1			(soc_is_exynos4210() ? \
+					S5P_CLKREG(0x1410C) : \
+					S5P_CLKREG(0x1010C))
 
 #define S5P_CLKSRC_CPU			S5P_CLKREG(0x14200)
 #define S5P_CLKMUX_STATCPU		S5P_CLKREG(0x14400)
@@ -183,6 +190,13 @@
 #define S5P_CLKDIV_BUS_GPLR_SHIFT	(4)
 #define S5P_CLKDIV_BUS_GPLR_MASK	(0x7 << S5P_CLKDIV_BUS_GPLR_SHIFT)
 
+/* Only for EXYNOS4210 */
+
+#define S5P_CLKSRC_LCD1			S5P_CLKREG(0x0C238)
+#define S5P_CLKSRC_MASK_LCD1		S5P_CLKREG(0x0C338)
+#define S5P_CLKDIV_LCD1			S5P_CLKREG(0x0C538)
+#define S5P_CLKGATE_IP_LCD1		S5P_CLKREG(0x0C938)
+
 /* Compatibility defines and inclusion */
 
 #include <mach/regs-pmu.h>
diff --git a/arch/arm/plat-s5p/include/plat/exynos4.h b/arch/arm/plat-s5p/include/plat/exynos4.h
index 4aed1305df5..f680a143e38 100644
--- a/arch/arm/plat-s5p/include/plat/exynos4.h
+++ b/arch/arm/plat-s5p/include/plat/exynos4.h
@@ -14,6 +14,8 @@
 
 extern void exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 extern void exynos4_register_clocks(void);
+extern void exynos4210_register_clocks(void);
+extern void exynos4212_register_clocks(void);
 extern void exynos4_setup_clocks(void);
 
 #ifdef CONFIG_ARCH_EXYNOS4
diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-s5p/include/plat/pll.h
index bf28fadee7a..1bfd61a4c8d 100644
--- a/arch/arm/plat-s5p/include/plat/pll.h
+++ b/arch/arm/plat-s5p/include/plat/pll.h
@@ -12,6 +12,59 @@
  * published by the Free Software Foundation.
 */
 
+#include <asm/div64.h>
+
+#define PLL35XX_MDIV_MASK	(0x3FF)
+#define PLL35XX_PDIV_MASK	(0x3F)
+#define PLL35XX_SDIV_MASK	(0x7)
+#define PLL35XX_MDIV_SHIFT	(16)
+#define PLL35XX_PDIV_SHIFT	(8)
+#define PLL35XX_SDIV_SHIFT	(0)
+
+static inline unsigned long s5p_get_pll35xx(unsigned long baseclk, u32 pll_con)
+{
+	u32 mdiv, pdiv, sdiv;
+	u64 fvco = baseclk;
+
+	mdiv = (pll_con >> PLL35XX_MDIV_SHIFT) & PLL35XX_MDIV_MASK;
+	pdiv = (pll_con >> PLL35XX_PDIV_SHIFT) & PLL35XX_PDIV_MASK;
+	sdiv = (pll_con >> PLL35XX_SDIV_SHIFT) & PLL35XX_SDIV_MASK;
+
+	fvco *= mdiv;
+	do_div(fvco, (pdiv << sdiv));
+
+	return (unsigned long)fvco;
+}
+
+#define PLL36XX_KDIV_MASK	(0xFFFF)
+#define PLL36XX_MDIV_MASK	(0x1FF)
+#define PLL36XX_PDIV_MASK	(0x3F)
+#define PLL36XX_SDIV_MASK	(0x7)
+#define PLL36XX_MDIV_SHIFT	(16)
+#define PLL36XX_PDIV_SHIFT	(8)
+#define PLL36XX_SDIV_SHIFT	(0)
+
+static inline unsigned long s5p_get_pll36xx(unsigned long baseclk,
+					    u32 pll_con0, u32 pll_con1)
+{
+	unsigned long result;
+	u32 mdiv, pdiv, sdiv, kdiv;
+	u64 tmp;
+
+	mdiv = (pll_con0 >> PLL36XX_MDIV_SHIFT) & PLL36XX_MDIV_MASK;
+	pdiv = (pll_con0 >> PLL36XX_PDIV_SHIFT) & PLL36XX_PDIV_MASK;
+	sdiv = (pll_con0 >> PLL36XX_SDIV_SHIFT) & PLL36XX_SDIV_MASK;
+	kdiv = pll_con1 & PLL36XX_KDIV_MASK;
+
+	tmp = baseclk;
+
+	tmp *= (mdiv << 16) + kdiv;
+	do_div(tmp, (pdiv << sdiv));
+	result = tmp >> 16;
+
+	return result;
+}
+
 #define PLL45XX_MDIV_MASK	(0x3FF)
 #define PLL45XX_PDIV_MASK	(0x3F)
 #define PLL45XX_SDIV_MASK	(0x7)
@@ -19,8 +72,6 @@
 #define PLL45XX_PDIV_SHIFT	(8)
 #define PLL45XX_SDIV_SHIFT	(0)
 
-#include <asm/div64.h>
-
 enum pll45xx_type_t {
 	pll_4500,
 	pll_4502,
-- 
cgit v1.2.3-18-g5258


From acd35616c7a30130d3b43ae1c1bb0b7fd121ffb9 Mon Sep 17 00:00:00 2001
From: Jonghwan Choi <jhbird.choi@samsung.com>
Date: Wed, 24 Aug 2011 21:52:45 +0900
Subject: ARM: EXYNOS4: Add support PM for EXYNOS4212

This patch moves regarding clock stuff of PM into clock
file to support PM on EXYNOS4210 and EXYNOS4212 with one
single kernel image. Because some clock registers are
different on each SoCs.

Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com>
[kgene.kim@samsung.com: use CONFIG_PM_SLEEP instead of CONFIG_PM]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/clock-exynos4210.c        | 38 +++++++++++
 arch/arm/mach-exynos4/clock-exynos4212.c        | 34 ++++++++++
 arch/arm/mach-exynos4/clock.c                   | 89 +++++++++++++++++++++++++
 arch/arm/mach-exynos4/include/mach/regs-clock.h |  4 ++
 arch/arm/mach-exynos4/pm.c                      | 79 ++--------------------
 5 files changed, 172 insertions(+), 72 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/clock-exynos4210.c b/arch/arm/mach-exynos4/clock-exynos4210.c
index fe74b9179fe..b9d5ef670eb 100644
--- a/arch/arm/mach-exynos4/clock-exynos4210.c
+++ b/arch/arm/mach-exynos4/clock-exynos4210.c
@@ -15,6 +15,7 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/syscore_ops.h>
 
 #include <plat/cpu-freq.h>
 #include <plat/clock.h>
@@ -23,12 +24,24 @@
 #include <plat/s5p-clock.h>
 #include <plat/clock-clksrc.h>
 #include <plat/exynos4.h>
+#include <plat/pm.h>
 
 #include <mach/hardware.h>
 #include <mach/map.h>
 #include <mach/regs-clock.h>
 #include <mach/exynos4-clock.h>
 
+static struct sleep_save exynos4210_clock_save[] = {
+	SAVE_ITEM(S5P_CLKSRC_IMAGE),
+	SAVE_ITEM(S5P_CLKSRC_LCD1),
+	SAVE_ITEM(S5P_CLKDIV_IMAGE),
+	SAVE_ITEM(S5P_CLKDIV_LCD1),
+	SAVE_ITEM(S5P_CLKSRC_MASK_LCD1),
+	SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4210),
+	SAVE_ITEM(S5P_CLKGATE_IP_LCD1),
+	SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4210),
+};
+
 static struct clksrc_clk *sysclks[] = {
 	/* nothing here yet */
 };
@@ -83,6 +96,29 @@ static struct clk init_clocks_off[] = {
 	},
 };
 
+#ifdef CONFIG_PM_SLEEP
+static int exynos4210_clock_suspend(void)
+{
+	s3c_pm_do_save(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save));
+
+	return 0;
+}
+
+static void exynos4210_clock_resume(void)
+{
+	s3c_pm_do_restore_core(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save));
+}
+
+#else
+#define exynos4210_clock_suspend NULL
+#define exynos4210_clock_resume NULL
+#endif
+
+struct syscore_ops exynos4210_clock_syscore_ops = {
+	.suspend	= exynos4210_clock_suspend,
+	.resume		= exynos4210_clock_resume,
+};
+
 void __init exynos4210_register_clocks(void)
 {
 	int ptr;
@@ -98,4 +134,6 @@ void __init exynos4210_register_clocks(void)
 
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+
+	register_syscore_ops(&exynos4210_clock_syscore_ops);
 }
diff --git a/arch/arm/mach-exynos4/clock-exynos4212.c b/arch/arm/mach-exynos4/clock-exynos4212.c
index 5a47a3f0dfe..77d5decb34f 100644
--- a/arch/arm/mach-exynos4/clock-exynos4212.c
+++ b/arch/arm/mach-exynos4/clock-exynos4212.c
@@ -15,6 +15,7 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/syscore_ops.h>
 
 #include <plat/cpu-freq.h>
 #include <plat/clock.h>
@@ -23,12 +24,20 @@
 #include <plat/s5p-clock.h>
 #include <plat/clock-clksrc.h>
 #include <plat/exynos4.h>
+#include <plat/pm.h>
 
 #include <mach/hardware.h>
 #include <mach/map.h>
 #include <mach/regs-clock.h>
 #include <mach/exynos4-clock.h>
 
+static struct sleep_save exynos4212_clock_save[] = {
+	SAVE_ITEM(S5P_CLKSRC_IMAGE),
+	SAVE_ITEM(S5P_CLKDIV_IMAGE),
+	SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4212),
+	SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4212),
+};
+
 static struct clk *clk_src_mpll_user_list[] = {
 	[0] = &clk_fin_mpll,
 	[1] = &clk_mout_mpll.clk,
@@ -59,6 +68,29 @@ static struct clk init_clocks_off[] = {
 	/* nothing here yet */
 };
 
+#ifdef CONFIG_PM_SLEEP
+static int exynos4212_clock_suspend(void)
+{
+	s3c_pm_do_save(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save));
+
+	return 0;
+}
+
+static void exynos4212_clock_resume(void)
+{
+	s3c_pm_do_restore_core(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save));
+}
+
+#else
+#define exynos4212_clock_suspend NULL
+#define exynos4212_clock_resume NULL
+#endif
+
+struct syscore_ops exynos4212_clock_syscore_ops = {
+	.suspend	= exynos4212_clock_suspend,
+	.resume		= exynos4212_clock_resume,
+};
+
 void __init exynos4212_register_clocks(void)
 {
 	int ptr;
@@ -81,4 +113,6 @@ void __init exynos4212_register_clocks(void)
 
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+
+	register_syscore_ops(&exynos4212_clock_syscore_ops);
 }
diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos4/clock.c
index eb99467d676..f26aea3e1bb 100644
--- a/arch/arm/mach-exynos4/clock.c
+++ b/arch/arm/mach-exynos4/clock.c
@@ -13,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/syscore_ops.h>
 
 #include <plat/cpu-freq.h>
 #include <plat/clock.h>
@@ -21,12 +22,77 @@
 #include <plat/s5p-clock.h>
 #include <plat/clock-clksrc.h>
 #include <plat/exynos4.h>
+#include <plat/pm.h>
 
 #include <mach/map.h>
 #include <mach/regs-clock.h>
 #include <mach/sysmmu.h>
 #include <mach/exynos4-clock.h>
 
+static struct sleep_save exynos4_clock_save[] = {
+	SAVE_ITEM(S5P_CLKDIV_LEFTBUS),
+	SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS),
+	SAVE_ITEM(S5P_CLKDIV_RIGHTBUS),
+	SAVE_ITEM(S5P_CLKGATE_IP_RIGHTBUS),
+	SAVE_ITEM(S5P_CLKSRC_TOP0),
+	SAVE_ITEM(S5P_CLKSRC_TOP1),
+	SAVE_ITEM(S5P_CLKSRC_CAM),
+	SAVE_ITEM(S5P_CLKSRC_TV),
+	SAVE_ITEM(S5P_CLKSRC_MFC),
+	SAVE_ITEM(S5P_CLKSRC_G3D),
+	SAVE_ITEM(S5P_CLKSRC_LCD0),
+	SAVE_ITEM(S5P_CLKSRC_MAUDIO),
+	SAVE_ITEM(S5P_CLKSRC_FSYS),
+	SAVE_ITEM(S5P_CLKSRC_PERIL0),
+	SAVE_ITEM(S5P_CLKSRC_PERIL1),
+	SAVE_ITEM(S5P_CLKDIV_CAM),
+	SAVE_ITEM(S5P_CLKDIV_TV),
+	SAVE_ITEM(S5P_CLKDIV_MFC),
+	SAVE_ITEM(S5P_CLKDIV_G3D),
+	SAVE_ITEM(S5P_CLKDIV_LCD0),
+	SAVE_ITEM(S5P_CLKDIV_MAUDIO),
+	SAVE_ITEM(S5P_CLKDIV_FSYS0),
+	SAVE_ITEM(S5P_CLKDIV_FSYS1),
+	SAVE_ITEM(S5P_CLKDIV_FSYS2),
+	SAVE_ITEM(S5P_CLKDIV_FSYS3),
+	SAVE_ITEM(S5P_CLKDIV_PERIL0),
+	SAVE_ITEM(S5P_CLKDIV_PERIL1),
+	SAVE_ITEM(S5P_CLKDIV_PERIL2),
+	SAVE_ITEM(S5P_CLKDIV_PERIL3),
+	SAVE_ITEM(S5P_CLKDIV_PERIL4),
+	SAVE_ITEM(S5P_CLKDIV_PERIL5),
+	SAVE_ITEM(S5P_CLKDIV_TOP),
+	SAVE_ITEM(S5P_CLKSRC_MASK_TOP),
+	SAVE_ITEM(S5P_CLKSRC_MASK_CAM),
+	SAVE_ITEM(S5P_CLKSRC_MASK_TV),
+	SAVE_ITEM(S5P_CLKSRC_MASK_LCD0),
+	SAVE_ITEM(S5P_CLKSRC_MASK_MAUDIO),
+	SAVE_ITEM(S5P_CLKSRC_MASK_FSYS),
+	SAVE_ITEM(S5P_CLKSRC_MASK_PERIL0),
+	SAVE_ITEM(S5P_CLKSRC_MASK_PERIL1),
+	SAVE_ITEM(S5P_CLKDIV2_RATIO),
+	SAVE_ITEM(S5P_CLKGATE_SCLKCAM),
+	SAVE_ITEM(S5P_CLKGATE_IP_CAM),
+	SAVE_ITEM(S5P_CLKGATE_IP_TV),
+	SAVE_ITEM(S5P_CLKGATE_IP_MFC),
+	SAVE_ITEM(S5P_CLKGATE_IP_G3D),
+	SAVE_ITEM(S5P_CLKGATE_IP_LCD0),
+	SAVE_ITEM(S5P_CLKGATE_IP_FSYS),
+	SAVE_ITEM(S5P_CLKGATE_IP_GPS),
+	SAVE_ITEM(S5P_CLKGATE_IP_PERIL),
+	SAVE_ITEM(S5P_CLKGATE_BLOCK),
+	SAVE_ITEM(S5P_CLKSRC_MASK_DMC),
+	SAVE_ITEM(S5P_CLKSRC_DMC),
+	SAVE_ITEM(S5P_CLKDIV_DMC0),
+	SAVE_ITEM(S5P_CLKDIV_DMC1),
+	SAVE_ITEM(S5P_CLKGATE_IP_DMC),
+	SAVE_ITEM(S5P_CLKSRC_CPU),
+	SAVE_ITEM(S5P_CLKDIV_CPU),
+	SAVE_ITEM(S5P_CLKDIV_CPU + 0x4),
+	SAVE_ITEM(S5P_CLKGATE_SCLKCPU),
+	SAVE_ITEM(S5P_CLKGATE_IP_CPU),
+};
+
 struct clk clk_sclk_hdmi27m = {
 	.name		= "sclk_hdmi27m",
 	.rate		= 27000000,
@@ -1180,6 +1246,28 @@ static struct clk *clks[] __initdata = {
 	/* Nothing here yet */
 };
 
+#ifdef CONFIG_PM_SLEEP
+static int exynos4_clock_suspend(void)
+{
+	s3c_pm_do_save(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
+	return 0;
+}
+
+static void exynos4_clock_resume(void)
+{
+	s3c_pm_do_restore_core(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
+}
+
+#else
+#define exynos4_clock_suspend NULL
+#define exynos4_clock_resume NULL
+#endif
+
+struct syscore_ops exynos4_clock_syscore_ops = {
+	.suspend	= exynos4_clock_suspend,
+	.resume		= exynos4_clock_resume,
+};
+
 void __init exynos4_register_clocks(void)
 {
 	int ptr;
@@ -1195,5 +1283,6 @@ void __init exynos4_register_clocks(void)
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
+	register_syscore_ops(&exynos4_clock_syscore_ops);
 	s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-exynos4/include/mach/regs-clock.h b/arch/arm/mach-exynos4/include/mach/regs-clock.h
index e75d0f83864..6c37ebe9482 100644
--- a/arch/arm/mach-exynos4/include/mach/regs-clock.h
+++ b/arch/arm/mach-exynos4/include/mach/regs-clock.h
@@ -86,6 +86,8 @@
 #define S5P_CLKGATE_IP_IMAGE		(soc_is_exynos4210() ? \
 					S5P_CLKREG(0x0C930) : \
 					S5P_CLKREG(0x04930))
+#define S5P_CLKGATE_IP_IMAGE_4210	S5P_CLKREG(0x0C930)
+#define S5P_CLKGATE_IP_IMAGE_4212	S5P_CLKREG(0x04930)
 #define S5P_CLKGATE_IP_LCD0		S5P_CLKREG(0x0C934)
 #define S5P_CLKGATE_IP_FSYS		S5P_CLKREG(0x0C940)
 #define S5P_CLKGATE_IP_GPS		S5P_CLKREG(0x0C94C)
@@ -93,6 +95,8 @@
 #define S5P_CLKGATE_IP_PERIR		(soc_is_exynos4210() ? \
 					S5P_CLKREG(0x0C960) : \
 					S5P_CLKREG(0x08960))
+#define S5P_CLKGATE_IP_PERIR_4210	S5P_CLKREG(0x0C960)
+#define S5P_CLKGATE_IP_PERIR_4212	S5P_CLKREG(0x08960)
 #define S5P_CLKGATE_BLOCK		S5P_CLKREG(0x0C970)
 
 #define S5P_CLKSRC_MASK_DMC		S5P_CLKREG(0x10300)
diff --git a/arch/arm/mach-exynos4/pm.c b/arch/arm/mach-exynos4/pm.c
index bc6ca9482de..62e4f436300 100644
--- a/arch/arm/mach-exynos4/pm.c
+++ b/arch/arm/mach-exynos4/pm.c
@@ -41,7 +41,6 @@ static struct sleep_save exynos4_set_clksrc[] = {
 	{ .reg = S5P_CLKSRC_MASK_CAM			, .val = 0x11111111, },
 	{ .reg = S5P_CLKSRC_MASK_TV			, .val = 0x00000111, },
 	{ .reg = S5P_CLKSRC_MASK_LCD0			, .val = 0x00001111, },
-	{ .reg = S5P_CLKSRC_MASK_LCD1			, .val = 0x00001111, },
 	{ .reg = S5P_CLKSRC_MASK_MAUDIO			, .val = 0x00000001, },
 	{ .reg = S5P_CLKSRC_MASK_FSYS			, .val = 0x01011111, },
 	{ .reg = S5P_CLKSRC_MASK_PERIL0			, .val = 0x01111111, },
@@ -49,6 +48,10 @@ static struct sleep_save exynos4_set_clksrc[] = {
 	{ .reg = S5P_CLKSRC_MASK_DMC			, .val = 0x00010000, },
 };
 
+static struct sleep_save exynos4210_set_clksrc[] = {
+	{ .reg = S5P_CLKSRC_MASK_LCD1			, .val = 0x00001111, },
+};
+
 static struct sleep_save exynos4_epll_save[] = {
 	SAVE_ITEM(S5P_EPLL_CON0),
 	SAVE_ITEM(S5P_EPLL_CON1),
@@ -60,77 +63,6 @@ static struct sleep_save exynos4_vpll_save[] = {
 };
 
 static struct sleep_save exynos4_core_save[] = {
-	/* CMU side */
-	SAVE_ITEM(S5P_CLKDIV_LEFTBUS),
-	SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS),
-	SAVE_ITEM(S5P_CLKDIV_RIGHTBUS),
-	SAVE_ITEM(S5P_CLKGATE_IP_RIGHTBUS),
-	SAVE_ITEM(S5P_CLKSRC_TOP0),
-	SAVE_ITEM(S5P_CLKSRC_TOP1),
-	SAVE_ITEM(S5P_CLKSRC_CAM),
-	SAVE_ITEM(S5P_CLKSRC_TV),
-	SAVE_ITEM(S5P_CLKSRC_MFC),
-	SAVE_ITEM(S5P_CLKSRC_G3D),
-	SAVE_ITEM(S5P_CLKSRC_IMAGE),
-	SAVE_ITEM(S5P_CLKSRC_LCD0),
-	SAVE_ITEM(S5P_CLKSRC_LCD1),
-	SAVE_ITEM(S5P_CLKSRC_MAUDIO),
-	SAVE_ITEM(S5P_CLKSRC_FSYS),
-	SAVE_ITEM(S5P_CLKSRC_PERIL0),
-	SAVE_ITEM(S5P_CLKSRC_PERIL1),
-	SAVE_ITEM(S5P_CLKDIV_CAM),
-	SAVE_ITEM(S5P_CLKDIV_TV),
-	SAVE_ITEM(S5P_CLKDIV_MFC),
-	SAVE_ITEM(S5P_CLKDIV_G3D),
-	SAVE_ITEM(S5P_CLKDIV_IMAGE),
-	SAVE_ITEM(S5P_CLKDIV_LCD0),
-	SAVE_ITEM(S5P_CLKDIV_LCD1),
-	SAVE_ITEM(S5P_CLKDIV_MAUDIO),
-	SAVE_ITEM(S5P_CLKDIV_FSYS0),
-	SAVE_ITEM(S5P_CLKDIV_FSYS1),
-	SAVE_ITEM(S5P_CLKDIV_FSYS2),
-	SAVE_ITEM(S5P_CLKDIV_FSYS3),
-	SAVE_ITEM(S5P_CLKDIV_PERIL0),
-	SAVE_ITEM(S5P_CLKDIV_PERIL1),
-	SAVE_ITEM(S5P_CLKDIV_PERIL2),
-	SAVE_ITEM(S5P_CLKDIV_PERIL3),
-	SAVE_ITEM(S5P_CLKDIV_PERIL4),
-	SAVE_ITEM(S5P_CLKDIV_PERIL5),
-	SAVE_ITEM(S5P_CLKDIV_TOP),
-	SAVE_ITEM(S5P_CLKSRC_MASK_TOP),
-	SAVE_ITEM(S5P_CLKSRC_MASK_CAM),
-	SAVE_ITEM(S5P_CLKSRC_MASK_TV),
-	SAVE_ITEM(S5P_CLKSRC_MASK_LCD0),
-	SAVE_ITEM(S5P_CLKSRC_MASK_LCD1),
-	SAVE_ITEM(S5P_CLKSRC_MASK_MAUDIO),
-	SAVE_ITEM(S5P_CLKSRC_MASK_FSYS),
-	SAVE_ITEM(S5P_CLKSRC_MASK_PERIL0),
-	SAVE_ITEM(S5P_CLKSRC_MASK_PERIL1),
-	SAVE_ITEM(S5P_CLKDIV2_RATIO),
-	SAVE_ITEM(S5P_CLKGATE_SCLKCAM),
-	SAVE_ITEM(S5P_CLKGATE_IP_CAM),
-	SAVE_ITEM(S5P_CLKGATE_IP_TV),
-	SAVE_ITEM(S5P_CLKGATE_IP_MFC),
-	SAVE_ITEM(S5P_CLKGATE_IP_G3D),
-	SAVE_ITEM(S5P_CLKGATE_IP_IMAGE),
-	SAVE_ITEM(S5P_CLKGATE_IP_LCD0),
-	SAVE_ITEM(S5P_CLKGATE_IP_LCD1),
-	SAVE_ITEM(S5P_CLKGATE_IP_FSYS),
-	SAVE_ITEM(S5P_CLKGATE_IP_GPS),
-	SAVE_ITEM(S5P_CLKGATE_IP_PERIL),
-	SAVE_ITEM(S5P_CLKGATE_IP_PERIR),
-	SAVE_ITEM(S5P_CLKGATE_BLOCK),
-	SAVE_ITEM(S5P_CLKSRC_MASK_DMC),
-	SAVE_ITEM(S5P_CLKSRC_DMC),
-	SAVE_ITEM(S5P_CLKDIV_DMC0),
-	SAVE_ITEM(S5P_CLKDIV_DMC1),
-	SAVE_ITEM(S5P_CLKGATE_IP_DMC),
-	SAVE_ITEM(S5P_CLKSRC_CPU),
-	SAVE_ITEM(S5P_CLKDIV_CPU),
-	SAVE_ITEM(S5P_CLKDIV_CPU + 0x4),
-	SAVE_ITEM(S5P_CLKGATE_SCLKCPU),
-	SAVE_ITEM(S5P_CLKGATE_IP_CPU),
-
 	/* GIC side */
 	SAVE_ITEM(S5P_VA_GIC_CPU + 0x000),
 	SAVE_ITEM(S5P_VA_GIC_CPU + 0x004),
@@ -268,6 +200,9 @@ static void exynos4_pm_prepare(void)
 
 	s3c_pm_do_restore_core(exynos4_set_clksrc, ARRAY_SIZE(exynos4_set_clksrc));
 
+	if (soc_is_exynos4210())
+		s3c_pm_do_restore_core(exynos4210_set_clksrc, ARRAY_SIZE(exynos4210_set_clksrc));
+
 }
 
 static int exynos4_pm_add(struct sys_device *sysdev)
-- 
cgit v1.2.3-18-g5258


From be4ab3616839c26caf914449de3a22458f53f6e5 Mon Sep 17 00:00:00 2001
From: Kukjin Kim <kgene.kim@samsung.com>
Date: Wed, 24 Aug 2011 17:25:09 +0900
Subject: ARM: EXYNOS4: Add support SMDK4212 Board

This patch adds mach-smdk4212.c to support SMDK4212 board.
Now it can support HSMMCs, I2Cs, RTC, WDT and Keypad. Other
features will be supported next time.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/Kconfig         |  25 +++
 arch/arm/mach-exynos4/Makefile        |   2 +
 arch/arm/mach-exynos4/mach-smdk4212.c | 292 ++++++++++++++++++++++++++++++++++
 3 files changed, 319 insertions(+)
 create mode 100644 arch/arm/mach-exynos4/mach-smdk4212.c

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index 0b40289d4f7..f4ec583ec94 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -116,6 +116,8 @@ config EXYNOS4_SETUP_USB_PHY
 
 menu "EXYNOS4 Machines"
 
+comment "EXYNOS4210 Boards"
+
 config MACH_SMDKC210
 	bool "SMDKC210"
 	select MACH_SMDKV310
@@ -208,6 +210,29 @@ config MACH_NURI
 	help
 	  Machine support for Samsung Mobile NURI Board.
 
+comment "EXYNOS4212 Boards"
+
+config MACH_SMDK4212
+	bool "SMDK4212"
+	select SOC_EXYNOS4212
+	select S3C_DEV_HSMMC2
+	select S3C_DEV_HSMMC3
+	select S3C_DEV_I2C1
+	select S3C_DEV_I2C3
+	select S3C_DEV_I2C7
+	select S3C_DEV_RTC
+	select S3C_DEV_WDT
+	select SAMSUNG_DEV_BACKLIGHT
+	select SAMSUNG_DEV_KEYPAD
+	select SAMSUNG_DEV_PWM
+	select EXYNOS4_SETUP_I2C1
+	select EXYNOS4_SETUP_I2C3
+	select EXYNOS4_SETUP_I2C7
+	select EXYNOS4_SETUP_KEYPAD
+	select EXYNOS4_SETUP_SDHCI
+	help
+	  Machine support for Samsung SMDK4212
+
 endmenu
 
 comment "Configuration for HSMMC bus width"
diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile
index 46244576452..64ffad4fb04 100644
--- a/arch/arm/mach-exynos4/Makefile
+++ b/arch/arm/mach-exynos4/Makefile
@@ -33,6 +33,8 @@ obj-$(CONFIG_MACH_ARMLEX4210)		+= mach-armlex4210.o
 obj-$(CONFIG_MACH_UNIVERSAL_C210)	+= mach-universal_c210.o
 obj-$(CONFIG_MACH_NURI)			+= mach-nuri.o
 
+obj-$(CONFIG_MACH_SMDK4212)		+= mach-smdk4212.o
+
 # device support
 
 obj-y					+= dev-audio.o
diff --git a/arch/arm/mach-exynos4/mach-smdk4212.c b/arch/arm/mach-exynos4/mach-smdk4212.c
new file mode 100644
index 00000000000..3479a933a6d
--- /dev/null
+++ b/arch/arm/mach-exynos4/mach-smdk4212.c
@@ -0,0 +1,292 @@
+/*
+ * linux/arch/arm/mach-exynos4/mach-smdk4212.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/mfd/max8997.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+#include <linux/pwm_backlight.h>
+#include <linux/regulator/machine.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <plat/backlight.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/exynos4.h>
+#include <plat/gpio-cfg.h>
+#include <plat/iic.h>
+#include <plat/keypad.h>
+#include <plat/regs-serial.h>
+#include <plat/sdhci.h>
+
+#include <mach/map.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define SMDK4212_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				 S3C2410_UCON_RXILEVEL |	\
+				 S3C2410_UCON_TXIRQMODE |	\
+				 S3C2410_UCON_RXIRQMODE |	\
+				 S3C2410_UCON_RXFIFO_TOI |	\
+				 S3C2443_UCON_RXERR_IRQEN)
+
+#define SMDK4212_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define SMDK4212_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				 S5PV210_UFCON_TXTRIG4 |	\
+				 S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg smdk4212_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= SMDK4212_UCON_DEFAULT,
+		.ulcon		= SMDK4212_ULCON_DEFAULT,
+		.ufcon		= SMDK4212_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= SMDK4212_UCON_DEFAULT,
+		.ulcon		= SMDK4212_ULCON_DEFAULT,
+		.ufcon		= SMDK4212_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= SMDK4212_UCON_DEFAULT,
+		.ulcon		= SMDK4212_ULCON_DEFAULT,
+		.ufcon		= SMDK4212_UFCON_DEFAULT,
+	},
+	[3] = {
+		.hwport		= 3,
+		.flags		= 0,
+		.ucon		= SMDK4212_UCON_DEFAULT,
+		.ulcon		= SMDK4212_ULCON_DEFAULT,
+		.ufcon		= SMDK4212_UFCON_DEFAULT,
+	},
+};
+
+static struct s3c_sdhci_platdata smdk4212_hsmmc2_pdata __initdata = {
+	.cd_type		= S3C_SDHCI_CD_INTERNAL,
+	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
+#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
+	.max_width		= 8,
+	.host_caps		= MMC_CAP_8_BIT_DATA,
+#endif
+};
+
+static struct s3c_sdhci_platdata smdk4212_hsmmc3_pdata __initdata = {
+	.cd_type		= S3C_SDHCI_CD_INTERNAL,
+	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct regulator_consumer_supply max8997_buck1 =
+	REGULATOR_SUPPLY("vdd_arm", NULL);
+
+static struct regulator_consumer_supply max8997_buck2 =
+	REGULATOR_SUPPLY("vdd_int", NULL);
+
+static struct regulator_consumer_supply max8997_buck3 =
+	REGULATOR_SUPPLY("vdd_g3d", NULL);
+
+static struct regulator_init_data max8997_buck1_data = {
+	.constraints	= {
+		.name		= "VDD_ARM_SMDK4212",
+		.min_uV		= 925000,
+		.max_uV		= 1350000,
+		.always_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &max8997_buck1,
+};
+
+static struct regulator_init_data max8997_buck2_data = {
+	.constraints	= {
+		.name		= "VDD_INT_SMDK4212",
+		.min_uV		= 950000,
+		.max_uV		= 1150000,
+		.always_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &max8997_buck2,
+};
+
+static struct regulator_init_data max8997_buck3_data = {
+	.constraints	= {
+		.name		= "VDD_G3D_SMDK4212",
+		.min_uV		= 950000,
+		.max_uV		= 1150000,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
+				  REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &max8997_buck3,
+};
+
+static struct max8997_regulator_data smdk4212_max8997_regulators[] = {
+	{ MAX8997_BUCK1, &max8997_buck1_data },
+	{ MAX8997_BUCK2, &max8997_buck2_data },
+	{ MAX8997_BUCK3, &max8997_buck3_data },
+};
+
+static struct max8997_platform_data smdk4212_max8997_pdata = {
+	.num_regulators	= ARRAY_SIZE(smdk4212_max8997_regulators),
+	.regulators	= smdk4212_max8997_regulators,
+
+	.buck1_voltage[0] = 1100000,	/* 1.1V */
+	.buck1_voltage[1] = 1100000,	/* 1.1V */
+	.buck1_voltage[2] = 1100000,	/* 1.1V */
+	.buck1_voltage[3] = 1100000,	/* 1.1V */
+	.buck1_voltage[4] = 1100000,	/* 1.1V */
+	.buck1_voltage[5] = 1100000,	/* 1.1V */
+	.buck1_voltage[6] = 1000000,	/* 1.0V */
+	.buck1_voltage[7] = 950000,	/* 0.95V */
+
+	.buck2_voltage[0] = 1100000,	/* 1.1V */
+	.buck2_voltage[1] = 1000000,	/* 1.0V */
+	.buck2_voltage[2] = 950000,	/* 0.95V */
+	.buck2_voltage[3] = 900000,	/* 0.9V */
+	.buck2_voltage[4] = 1100000,	/* 1.1V */
+	.buck2_voltage[5] = 1000000,	/* 1.0V */
+	.buck2_voltage[6] = 950000,	/* 0.95V */
+	.buck2_voltage[7] = 900000,	/* 0.9V */
+
+	.buck5_voltage[0] = 1100000,	/* 1.1V */
+	.buck5_voltage[1] = 1100000,	/* 1.1V */
+	.buck5_voltage[2] = 1100000,	/* 1.1V */
+	.buck5_voltage[3] = 1100000,	/* 1.1V */
+	.buck5_voltage[4] = 1100000,	/* 1.1V */
+	.buck5_voltage[5] = 1100000,	/* 1.1V */
+	.buck5_voltage[6] = 1100000,	/* 1.1V */
+	.buck5_voltage[7] = 1100000,	/* 1.1V */
+};
+
+static struct i2c_board_info smdk4212_i2c_devs0[] __initdata = {
+	{
+		I2C_BOARD_INFO("max8997", 0x66),
+		.platform_data	= &smdk4212_max8997_pdata,
+	}
+};
+
+static struct i2c_board_info smdk4212_i2c_devs1[] __initdata = {
+	{ I2C_BOARD_INFO("wm8994", 0x1a), }
+};
+
+static struct i2c_board_info smdk4212_i2c_devs3[] __initdata = {
+	/* nothing here yet */
+};
+
+static struct i2c_board_info smdk4212_i2c_devs7[] __initdata = {
+	/* nothing here yet */
+};
+
+static struct samsung_bl_gpio_info smdk4212_bl_gpio_info = {
+	.no = EXYNOS4_GPD0(1),
+	.func = S3C_GPIO_SFN(2),
+};
+
+static struct platform_pwm_backlight_data smdk4212_bl_data = {
+	.pwm_id = 1,
+	.pwm_period_ns  = 1000,
+};
+
+static uint32_t smdk4212_keymap[] __initdata = {
+	/* KEY(row, col, keycode) */
+	KEY(1, 0, KEY_D), KEY(1, 1, KEY_A), KEY(1, 2, KEY_B),
+	KEY(1, 3, KEY_E), KEY(1, 4, KEY_C)
+};
+
+static struct matrix_keymap_data smdk4212_keymap_data __initdata = {
+	.keymap		= smdk4212_keymap,
+	.keymap_size	= ARRAY_SIZE(smdk4212_keymap),
+};
+
+static struct samsung_keypad_platdata smdk4212_keypad_data __initdata = {
+	.keymap_data	= &smdk4212_keymap_data,
+	.rows		= 2,
+	.cols		= 5,
+};
+
+static struct platform_device *smdk4212_devices[] __initdata = {
+	&s3c_device_hsmmc2,
+	&s3c_device_hsmmc3,
+	&s3c_device_i2c0,
+	&s3c_device_i2c1,
+	&s3c_device_i2c3,
+	&s3c_device_i2c7,
+	&s3c_device_rtc,
+	&s3c_device_wdt,
+	&samsung_device_keypad,
+};
+
+static void __init smdk4212_map_io(void)
+{
+	clk_xusbxti.rate = 24000000;
+
+	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s3c24xx_init_clocks(clk_xusbxti.rate);
+	s3c24xx_init_uarts(smdk4212_uartcfgs, ARRAY_SIZE(smdk4212_uartcfgs));
+}
+
+static void __init smdk4212_machine_init(void)
+{
+	s3c_i2c0_set_platdata(NULL);
+	i2c_register_board_info(0, smdk4212_i2c_devs0,
+				ARRAY_SIZE(smdk4212_i2c_devs0));
+
+	s3c_i2c1_set_platdata(NULL);
+	i2c_register_board_info(1, smdk4212_i2c_devs1,
+				ARRAY_SIZE(smdk4212_i2c_devs1));
+
+	s3c_i2c3_set_platdata(NULL);
+	i2c_register_board_info(3, smdk4212_i2c_devs3,
+				ARRAY_SIZE(smdk4212_i2c_devs3));
+
+	s3c_i2c7_set_platdata(NULL);
+	i2c_register_board_info(7, smdk4212_i2c_devs7,
+				ARRAY_SIZE(smdk4212_i2c_devs7));
+
+	samsung_bl_set(&smdk4212_bl_gpio_info, &smdk4212_bl_data);
+
+	samsung_keypad_set_platdata(&smdk4212_keypad_data);
+
+	s3c_sdhci2_set_platdata(&smdk4212_hsmmc2_pdata);
+	s3c_sdhci3_set_platdata(&smdk4212_hsmmc3_pdata);
+
+	platform_add_devices(smdk4212_devices, ARRAY_SIZE(smdk4212_devices));
+}
+
+MACHINE_START(SMDK4212, "SMDK4212")
+	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.init_irq	= exynos4_init_irq,
+	.map_io		= smdk4212_map_io,
+	.init_machine	= smdk4212_machine_init,
+	.timer		= &exynos4_timer,
+MACHINE_END
-- 
cgit v1.2.3-18-g5258


From ae79ac5c0ccb8789df661b8aa4b16bac4243f43d Mon Sep 17 00:00:00 2001
From: Kukjin Kim <kgene.kim@samsung.com>
Date: Tue, 30 Aug 2011 16:49:36 +0900
Subject: ARM: SAMSUNG: Move map header file into plat-samsung

This is required to work consolidation Samsung platform.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c2410/include/mach/map.h     |  52 ++++++++++++--
 arch/arm/mach-s3c64xx/include/mach/map.h     |   9 +--
 arch/arm/plat-s3c24xx/include/plat/map.h     | 100 ---------------------------
 arch/arm/plat-s5p/include/plat/map-s5p.h     |  61 ----------------
 arch/arm/plat-samsung/include/plat/map-s3c.h |  84 ++++++++++++++++++++++
 arch/arm/plat-samsung/include/plat/map-s5p.h |  61 ++++++++++++++++
 6 files changed, 192 insertions(+), 175 deletions(-)
 delete mode 100644 arch/arm/plat-s3c24xx/include/plat/map.h
 delete mode 100644 arch/arm/plat-s5p/include/plat/map-s5p.h
 create mode 100644 arch/arm/plat-samsung/include/plat/map-s3c.h
 create mode 100644 arch/arm/plat-samsung/include/plat/map-s5p.h

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
index 425552d84b6..4cf495f813a 100644
--- a/arch/arm/mach-s3c2410/include/mach/map.h
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -14,9 +14,53 @@
 #define __ASM_ARCH_MAP_H
 
 #include <plat/map-base.h>
-#include <plat/map.h>
 
-#define S3C2410_ADDR(x)		S3C_ADDR(x)
+/*
+ * S3C2410 UART offset is 0x4000 but the other SoCs are 0x400.
+ * So need to define it, and here is to avoid redefinition warning.
+ */
+#define S3C_UART_OFFSET		(0x4000)
+
+#include <plat/map-s3c.h>
+
+/*
+ * interrupt controller is the first thing we put in, to make
+ * the assembly code for the irq detection easier
+ */
+#define S3C2410_PA_IRQ		(0x4A000000)
+#define S3C24XX_SZ_IRQ		SZ_1M
+
+/* memory controller registers */
+#define S3C2410_PA_MEMCTRL	(0x48000000)
+#define S3C24XX_SZ_MEMCTRL	SZ_1M
+
+/* UARTs */
+#define S3C_VA_UARTx(uart)	(S3C_VA_UART + ((uart * S3C_UART_OFFSET)))
+
+/* Timers */
+#define S3C2410_PA_TIMER	(0x51000000)
+#define S3C24XX_SZ_TIMER	SZ_1M
+
+/* Clock and Power management */
+#define S3C24XX_SZ_CLKPWR	SZ_1M
+
+/* USB Device port */
+#define S3C2410_PA_USBDEV	(0x52000000)
+#define S3C24XX_SZ_USBDEV	SZ_1M
+
+/* Watchdog */
+#define S3C2410_PA_WATCHDOG	(0x53000000)
+#define S3C24XX_SZ_WATCHDOG	SZ_1M
+
+/* Standard size definitions for peripheral blocks. */
+
+#define S3C24XX_SZ_UART		SZ_1M
+#define S3C24XX_SZ_IIS		SZ_1M
+#define S3C24XX_SZ_ADC		SZ_1M
+#define S3C24XX_SZ_SPI		SZ_1M
+#define S3C24XX_SZ_SDI		SZ_1M
+#define S3C24XX_SZ_NAND		SZ_1M
+#define S3C24XX_SZ_GPIO		SZ_1M
 
 /* USB host controller */
 #define S3C2410_PA_USBHOST (0x49000000)
@@ -75,10 +119,8 @@
 
 /* S3C2412 memory and IO controls */
 #define S3C2412_PA_SSMC	(0x4F000000)
-#define S3C2412_VA_SSMC	S3C_ADDR_CPU(0x00000000)
 
 #define S3C2412_PA_EBI	(0x48800000)
-#define S3C2412_VA_EBI	S3C_ADDR_CPU(0x00010000)
 
 /* physical addresses of all the chip-select areas */
 
@@ -100,12 +142,10 @@
 #define S3C24XX_PA_DMA      S3C2410_PA_DMA
 #define S3C24XX_PA_CLKPWR   S3C2410_PA_CLKPWR
 #define S3C24XX_PA_LCD      S3C2410_PA_LCD
-#define S3C24XX_PA_UART     S3C2410_PA_UART
 #define S3C24XX_PA_TIMER    S3C2410_PA_TIMER
 #define S3C24XX_PA_USBDEV   S3C2410_PA_USBDEV
 #define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG
 #define S3C24XX_PA_IIS      S3C2410_PA_IIS
-#define S3C24XX_PA_GPIO     S3C2410_PA_GPIO
 #define S3C24XX_PA_RTC      S3C2410_PA_RTC
 #define S3C24XX_PA_ADC      S3C2410_PA_ADC
 #define S3C24XX_PA_SPI      S3C2410_PA_SPI
diff --git a/arch/arm/mach-s3c64xx/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h
index a1f13f02c84..23a1d71e4d5 100644
--- a/arch/arm/mach-s3c64xx/include/mach/map.h
+++ b/arch/arm/mach-s3c64xx/include/mach/map.h
@@ -16,6 +16,7 @@
 #define __ASM_ARCH_MAP_H __FILE__
 
 #include <plat/map-base.h>
+#include <plat/map-s3c.h>
 
 /*
  * Post-mux Chip Select Regions Xm0CSn_
@@ -83,7 +84,6 @@
 #define S3C64XX_PA_IIC1		(0x7F00F000)
 
 #define S3C64XX_PA_GPIO		(0x7F008000)
-#define S3C64XX_VA_GPIO		S3C_ADDR_CPU(0x00000000)
 #define S3C64XX_SZ_GPIO		SZ_4K
 
 #define S3C64XX_PA_SDRAM	(0x50000000)
@@ -94,16 +94,10 @@
 #define S3C64XX_PA_VIC1		(0x71300000)
 
 #define S3C64XX_PA_MODEM	(0x74108000)
-#define S3C64XX_VA_MODEM	S3C_ADDR_CPU(0x00100000)
 
 #define S3C64XX_PA_USBHOST	(0x74300000)
 
 #define S3C64XX_PA_USB_HSPHY	(0x7C100000)
-#define S3C64XX_VA_USB_HSPHY	S3C_ADDR_CPU(0x00200000)
-
-/* place VICs close together */
-#define VA_VIC0			(S3C_VA_IRQ + 0x00)
-#define VA_VIC1			(S3C_VA_IRQ + 0x10000)
 
 /* compatibiltiy defines. */
 #define S3C_PA_TIMER		S3C64XX_PA_TIMER
@@ -119,7 +113,6 @@
 #define S3C_PA_FB		S3C64XX_PA_FB
 #define S3C_PA_USBHOST		S3C64XX_PA_USBHOST
 #define S3C_PA_USB_HSOTG	S3C64XX_PA_USB_HSOTG
-#define S3C_VA_USB_HSPHY	S3C64XX_VA_USB_HSPHY
 #define S3C_PA_RTC		S3C64XX_PA_RTC
 #define S3C_PA_WDT		S3C64XX_PA_WATCHDOG
 
diff --git a/arch/arm/plat-s3c24xx/include/plat/map.h b/arch/arm/plat-s3c24xx/include/plat/map.h
deleted file mode 100644
index bd534d32b99..00000000000
--- a/arch/arm/plat-s3c24xx/include/plat/map.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/map.h
- *
- * Copyright (c) 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_S3C24XX_MAP_H
-#define __ASM_PLAT_S3C24XX_MAP_H
-
-/* interrupt controller is the first thing we put in, to make
- * the assembly code for the irq detection easier
- */
-#define S3C24XX_VA_IRQ	   S3C_VA_IRQ
-#define S3C2410_PA_IRQ	   (0x4A000000)
-#define S3C24XX_SZ_IRQ	   SZ_1M
-
-/* memory controller registers */
-#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
-#define S3C2410_PA_MEMCTRL (0x48000000)
-#define S3C24XX_SZ_MEMCTRL SZ_1M
-
-/* UARTs */
-#define S3C24XX_VA_UART	   S3C_VA_UART
-#define S3C2410_PA_UART	   (0x50000000)
-#define S3C24XX_SZ_UART	   SZ_1M
-#define S3C_UART_OFFSET	   (0x4000)
-
-#define S3C_VA_UARTx(uart) (S3C_VA_UART + ((uart * S3C_UART_OFFSET)))
-
-/* Timers */
-#define S3C24XX_VA_TIMER   S3C_VA_TIMER
-#define S3C2410_PA_TIMER   (0x51000000)
-#define S3C24XX_SZ_TIMER   SZ_1M
-
-/* Clock and Power management */
-#define S3C24XX_VA_CLKPWR  S3C_VA_SYS
-#define S3C24XX_SZ_CLKPWR  SZ_1M
-
-/* USB Device port */
-#define S3C2410_PA_USBDEV  (0x52000000)
-#define S3C24XX_SZ_USBDEV  SZ_1M
-
-/* Watchdog */
-#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
-#define S3C2410_PA_WATCHDOG (0x53000000)
-#define S3C24XX_SZ_WATCHDOG SZ_1M
-
-/* Standard size definitions for peripheral blocks. */
-
-#define S3C24XX_SZ_IIS		SZ_1M
-#define S3C24XX_SZ_ADC		SZ_1M
-#define S3C24XX_SZ_SPI		SZ_1M
-#define S3C24XX_SZ_SDI		SZ_1M
-#define S3C24XX_SZ_NAND		SZ_1M
-
-/* GPIO ports */
-
-/* the calculation for the VA of this must ensure that
- * it is the same distance apart from the UART in the
- * phsyical address space, as the initial mapping for the IO
- * is done as a 1:1 mapping. This puts it (currently) at
- * 0xFA800000, which is not in the way of any current mapping
- * by the base system.
-*/
-
-#define S3C2410_PA_GPIO	   (0x56000000)
-#define S3C24XX_VA_GPIO	   ((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
-#define S3C24XX_SZ_GPIO	   SZ_1M
-
-
-/* ISA style IO, for each machine to sort out mappings for, if it
- * implements it. We reserve two 16M regions for ISA.
- */
-
-#define S3C24XX_VA_ISA_WORD  S3C2410_ADDR(0x02000000)
-#define S3C24XX_VA_ISA_BYTE  S3C2410_ADDR(0x03000000)
-
-/* deal with the registers that move under the 2412/2413 */
-
-#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
-#ifndef __ASSEMBLY__
-extern void __iomem *s3c24xx_va_gpio2;
-#endif
-#ifdef CONFIG_CPU_S3C2412_ONLY
-#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
-#else
-#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
-#endif
-#else
-#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
-#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
-#endif
-
-#endif /* __ASM_PLAT_S3C24XX_MAP_H */
diff --git a/arch/arm/plat-s5p/include/plat/map-s5p.h b/arch/arm/plat-s5p/include/plat/map-s5p.h
deleted file mode 100644
index 36d3551173b..00000000000
--- a/arch/arm/plat-s5p/include/plat/map-s5p.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/* linux/arch/arm/plat-s5p/include/plat/map-s5p.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_MAP_S5P_H
-#define __ASM_PLAT_MAP_S5P_H __FILE__
-
-#define S5P_VA_CHIPID		S3C_ADDR(0x02000000)
-#define S5P_VA_CMU		S3C_ADDR(0x02100000)
-#define S5P_VA_PMU		S3C_ADDR(0x02180000)
-#define S5P_VA_GPIO		S3C_ADDR(0x02200000)
-#define S5P_VA_GPIO1		S5P_VA_GPIO
-#define S5P_VA_GPIO2		S3C_ADDR(0x02240000)
-#define S5P_VA_GPIO3		S3C_ADDR(0x02280000)
-
-#define S5P_VA_SYSRAM		S3C_ADDR(0x02400000)
-#define S5P_VA_DMC0		S3C_ADDR(0x02440000)
-#define S5P_VA_DMC1		S3C_ADDR(0x02480000)
-#define S5P_VA_SROMC		S3C_ADDR(0x024C0000)
-
-#define S5P_VA_SYSTIMER		S3C_ADDR(0x02500000)
-#define S5P_VA_L2CC		S3C_ADDR(0x02600000)
-
-#define S5P_VA_COMBINER_BASE	S3C_ADDR(0x02700000)
-#define S5P_VA_COMBINER(x)	(S5P_VA_COMBINER_BASE + ((x) >> 2) * 0x10)
-
-#define S5P_VA_COREPERI_BASE	S3C_ADDR(0x02800000)
-#define S5P_VA_COREPERI(x)	(S5P_VA_COREPERI_BASE + (x))
-#define S5P_VA_SCU		S5P_VA_COREPERI(0x0)
-#define S5P_VA_TWD		S5P_VA_COREPERI(0x600)
-
-#define S5P_VA_GIC_CPU		S3C_ADDR(0x02810000)
-#define S5P_VA_GIC_DIST		S3C_ADDR(0x02820000)
-
-#define S3C_VA_USB_HSPHY	S3C_ADDR(0x02900000)
-
-#define VA_VIC(x)		(S3C_VA_IRQ + ((x) * 0x10000))
-#define VA_VIC0			VA_VIC(0)
-#define VA_VIC1			VA_VIC(1)
-#define VA_VIC2			VA_VIC(2)
-#define VA_VIC3			VA_VIC(3)
-
-#define S5P_VA_UART(x)		(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
-#define S5P_VA_UART0		S5P_VA_UART(0)
-#define S5P_VA_UART1		S5P_VA_UART(1)
-#define S5P_VA_UART2		S5P_VA_UART(2)
-#define S5P_VA_UART3		S5P_VA_UART(3)
-
-#ifndef S3C_UART_OFFSET
-#define S3C_UART_OFFSET		(0x400)
-#endif
-
-#endif /* __ASM_PLAT_MAP_S5P_H */
diff --git a/arch/arm/plat-samsung/include/plat/map-s3c.h b/arch/arm/plat-samsung/include/plat/map-s3c.h
new file mode 100644
index 00000000000..7d048759b77
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/map-s3c.h
@@ -0,0 +1,84 @@
+/* linux/arch/arm/plat-samsung/include/plat/map-s3c.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_MAP_S3C_H
+#define __ASM_PLAT_MAP_S3C_H __FILE__
+
+#define S3C24XX_VA_IRQ		S3C_VA_IRQ
+#define S3C24XX_VA_MEMCTRL	S3C_VA_MEM
+#define S3C24XX_VA_UART		S3C_VA_UART
+
+#define S3C24XX_VA_TIMER	S3C_VA_TIMER
+#define S3C24XX_VA_CLKPWR	S3C_VA_SYS
+#define S3C24XX_VA_WATCHDOG	S3C_VA_WATCHDOG
+
+#define S3C2412_VA_SSMC		S3C_ADDR_CPU(0x00000000)
+#define S3C2412_VA_EBI		S3C_ADDR_CPU(0x00010000)
+
+#define S3C2410_PA_UART		(0x50000000)
+#define S3C24XX_PA_UART		S3C2410_PA_UART
+
+#ifndef S3C_UART_OFFSET
+#define S3C_UART_OFFSET		(0x400)
+#endif
+
+/*
+ * GPIO ports
+ *
+ * the calculation for the VA of this must ensure that
+ * it is the same distance apart from the UART in the
+ * phsyical address space, as the initial mapping for the IO
+ * is done as a 1:1 mapping. This puts it (currently) at
+ * 0xFA800000, which is not in the way of any current mapping
+ * by the base system.
+*/
+
+#define S3C2410_PA_GPIO		(0x56000000)
+#define S3C24XX_PA_GPIO		S3C2410_PA_GPIO
+
+#define S3C24XX_VA_GPIO		((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
+#define S3C64XX_VA_GPIO		S3C_ADDR_CPU(0x00000000)
+
+#define S3C64XX_VA_MODEM	S3C_ADDR_CPU(0x00100000)
+#define S3C64XX_VA_USB_HSPHY	S3C_ADDR_CPU(0x00200000)
+
+#define S3C_VA_USB_HSPHY	S3C64XX_VA_USB_HSPHY
+
+/*
+ * ISA style IO, for each machine to sort out mappings for,
+ * if it implements it. We reserve two 16M regions for ISA.
+ */
+
+#define S3C2410_ADDR(x)		S3C_ADDR(x)
+
+#define S3C24XX_VA_ISA_WORD	S3C2410_ADDR(0x02000000)
+#define S3C24XX_VA_ISA_BYTE	S3C2410_ADDR(0x03000000)
+
+/* deal with the registers that move under the 2412/2413 */
+
+#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
+#ifndef __ASSEMBLY__
+extern void __iomem *s3c24xx_va_gpio2;
+#endif
+#ifdef CONFIG_CPU_S3C2412_ONLY
+#define S3C24XX_VA_GPIO2	(S3C24XX_VA_GPIO + 0x10)
+#else
+#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
+#endif
+#else
+#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
+#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
+#endif
+
+#include <plat/map-s5p.h>
+
+#endif /* __ASM_PLAT_MAP_S3C_H */
diff --git a/arch/arm/plat-samsung/include/plat/map-s5p.h b/arch/arm/plat-samsung/include/plat/map-s5p.h
new file mode 100644
index 00000000000..c2d7bdae589
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/map-s5p.h
@@ -0,0 +1,61 @@
+/* linux/arch/arm/plat-samsung/include/plat/map-s5p.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_MAP_S5P_H
+#define __ASM_PLAT_MAP_S5P_H __FILE__
+
+#define S5P_VA_CHIPID		S3C_ADDR(0x02000000)
+#define S5P_VA_CMU		S3C_ADDR(0x02100000)
+#define S5P_VA_PMU		S3C_ADDR(0x02180000)
+#define S5P_VA_GPIO		S3C_ADDR(0x02200000)
+#define S5P_VA_GPIO1		S5P_VA_GPIO
+#define S5P_VA_GPIO2		S3C_ADDR(0x02240000)
+#define S5P_VA_GPIO3		S3C_ADDR(0x02280000)
+
+#define S5P_VA_SYSRAM		S3C_ADDR(0x02400000)
+#define S5P_VA_DMC0		S3C_ADDR(0x02440000)
+#define S5P_VA_DMC1		S3C_ADDR(0x02480000)
+#define S5P_VA_SROMC		S3C_ADDR(0x024C0000)
+
+#define S5P_VA_SYSTIMER		S3C_ADDR(0x02500000)
+#define S5P_VA_L2CC		S3C_ADDR(0x02600000)
+
+#define S5P_VA_COMBINER_BASE	S3C_ADDR(0x02700000)
+#define S5P_VA_COMBINER(x)	(S5P_VA_COMBINER_BASE + ((x) >> 2) * 0x10)
+
+#define S5P_VA_COREPERI_BASE	S3C_ADDR(0x02800000)
+#define S5P_VA_COREPERI(x)	(S5P_VA_COREPERI_BASE + (x))
+#define S5P_VA_SCU		S5P_VA_COREPERI(0x0)
+#define S5P_VA_TWD		S5P_VA_COREPERI(0x600)
+
+#define S5P_VA_GIC_CPU		S3C_ADDR(0x02810000)
+#define S5P_VA_GIC_DIST		S3C_ADDR(0x02820000)
+
+#define VA_VIC(x)		(S3C_VA_IRQ + ((x) * 0x10000))
+#define VA_VIC0			VA_VIC(0)
+#define VA_VIC1			VA_VIC(1)
+#define VA_VIC2			VA_VIC(2)
+#define VA_VIC3			VA_VIC(3)
+
+#define S5P_VA_UART(x)		(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
+#define S5P_VA_UART0		S5P_VA_UART(0)
+#define S5P_VA_UART1		S5P_VA_UART(1)
+#define S5P_VA_UART2		S5P_VA_UART(2)
+#define S5P_VA_UART3		S5P_VA_UART(3)
+
+#ifndef S3C_UART_OFFSET
+#define S3C_UART_OFFSET		(0x400)
+#endif
+
+#include <plat/map-s3c.h>
+
+#endif /* __ASM_PLAT_MAP_S5P_H */
-- 
cgit v1.2.3-18-g5258


From 986afc98ce24901865828dab9ba876fd9be6beb2 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Fri, 12 Aug 2011 18:08:17 +0900
Subject: ARM: S3C64XX: Hook up GPIO initiated DVS on Cragganmore

Allow us to ramp VDDARM quickly by using a GPIO to signal a voltage change
instead of doing a register write.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c64xx/mach-crag6410.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index af0c2fe1ea3..5affb26a198 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -353,6 +353,12 @@ static struct pca953x_platform_data crag6410_pca_data = {
 	.irq_base	= 0,
 };
 
+/* VDDARM is controlled by DVS1 connected to GPK(0) */
+static struct wm831x_buckv_pdata vddarm_pdata = {
+	.dvs_control_src = 1,
+	.dvs_gpio = S3C64XX_GPK(0),
+};
+
 static struct regulator_consumer_supply vddarm_consumers[] __initdata = {
 	REGULATOR_SUPPLY("vddarm", NULL),
 };
@@ -368,6 +374,7 @@ static struct regulator_init_data vddarm __initdata = {
 	.num_consumer_supplies = ARRAY_SIZE(vddarm_consumers),
 	.consumer_supplies = vddarm_consumers,
 	.supply_regulator = "WALLVDD",
+	.driver_data = &vddarm_pdata,
 };
 
 static struct regulator_init_data vddint __initdata = {
@@ -503,6 +510,8 @@ static struct wm831x_pdata crag_pmic_pdata __initdata = {
 	.backup = &banff_backup_pdata,
 
 	.gpio_defaults = {
+		/* GPIO5: DVS1_REQ - CMOS, DBVDD, active high */
+		[4] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA | 0x8,
 		/* GPIO11: Touchscreen data - CMOS, DBVDD, active high*/
 		[10] = WM831X_GPN_POL | WM831X_GPN_ENA | 0x6,
 		/* GPIO12: Touchscreen pen down - CMOS, DBVDD, active high*/
-- 
cgit v1.2.3-18-g5258


From f630c1bdfbf8fe423325beaf60027cfc7fd7c610 Mon Sep 17 00:00:00 2001
From: Will Deacon <will.deacon@arm.com>
Date: Thu, 15 Sep 2011 11:45:15 +0100
Subject: ARM: 7091/1: errata: D-cache line maintenance operation by MVA may
 not succeed

This patch implements a workaround for erratum 764369 affecting
Cortex-A9 MPCore with two or more processors (all current revisions).
Under certain timing circumstances, a data cache line maintenance
operation by MVA targeting an Inner Shareable memory region may fail to
proceed up to either the Point of Coherency or to the Point of
Unification of the system. This workaround adds a DSB instruction before
the relevant cache maintenance functions and sets a specific bit in the
diagnostic control register of the SCU.

Cc: <stable@kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig          | 14 ++++++++++++++
 arch/arm/kernel/smp_scu.c | 10 ++++++++++
 arch/arm/mm/cache-v7.S    | 20 ++++++++++++++++++++
 3 files changed, 44 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3269576dbfa..3146ed3f6ec 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1283,6 +1283,20 @@ config ARM_ERRATA_364296
 	  processor into full low interrupt latency mode. ARM11MPCore
 	  is not affected.
 
+config ARM_ERRATA_764369
+	bool "ARM errata: Data cache line maintenance operation by MVA may not succeed"
+	depends on CPU_V7 && SMP
+	help
+	  This option enables the workaround for erratum 764369
+	  affecting Cortex-A9 MPCore with two or more processors (all
+	  current revisions). Under certain timing circumstances, a data
+	  cache line maintenance operation by MVA targeting an Inner
+	  Shareable memory region may fail to proceed up to either the
+	  Point of Coherency or to the Point of Unification of the
+	  system. This workaround adds a DSB instruction before the
+	  relevant cache maintenance functions and sets a specific bit
+	  in the diagnostic control register of the SCU.
+
 endmenu
 
 source "arch/arm/common/Kconfig"
diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c
index 79ed5e7f204..7fcddb75c87 100644
--- a/arch/arm/kernel/smp_scu.c
+++ b/arch/arm/kernel/smp_scu.c
@@ -13,6 +13,7 @@
 
 #include <asm/smp_scu.h>
 #include <asm/cacheflush.h>
+#include <asm/cputype.h>
 
 #define SCU_CTRL		0x00
 #define SCU_CONFIG		0x04
@@ -37,6 +38,15 @@ void __init scu_enable(void __iomem *scu_base)
 {
 	u32 scu_ctrl;
 
+#ifdef CONFIG_ARM_ERRATA_764369
+	/* Cortex-A9 only */
+	if ((read_cpuid(CPUID_ID) & 0xff0ffff0) == 0x410fc090) {
+		scu_ctrl = __raw_readl(scu_base + 0x30);
+		if (!(scu_ctrl & 1))
+			__raw_writel(scu_ctrl | 0x1, scu_base + 0x30);
+	}
+#endif
+
 	scu_ctrl = __raw_readl(scu_base + SCU_CTRL);
 	/* already enabled? */
 	if (scu_ctrl & 1)
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index 3b24bfa3b82..07c4bc8ea0a 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -174,6 +174,10 @@ ENTRY(v7_coherent_user_range)
 	dcache_line_size r2, r3
 	sub	r3, r2, #1
 	bic	r12, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+	ALT_SMP(W(dsb))
+	ALT_UP(W(nop))
+#endif
 1:
  USER(	mcr	p15, 0, r12, c7, c11, 1	)	@ clean D line to the point of unification
 	add	r12, r12, r2
@@ -223,6 +227,10 @@ ENTRY(v7_flush_kern_dcache_area)
 	add	r1, r0, r1
 	sub	r3, r2, #1
 	bic	r0, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+	ALT_SMP(W(dsb))
+	ALT_UP(W(nop))
+#endif
 1:
 	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D line / unified line
 	add	r0, r0, r2
@@ -247,6 +255,10 @@ v7_dma_inv_range:
 	sub	r3, r2, #1
 	tst	r0, r3
 	bic	r0, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+	ALT_SMP(W(dsb))
+	ALT_UP(W(nop))
+#endif
 	mcrne	p15, 0, r0, c7, c14, 1		@ clean & invalidate D / U line
 
 	tst	r1, r3
@@ -270,6 +282,10 @@ v7_dma_clean_range:
 	dcache_line_size r2, r3
 	sub	r3, r2, #1
 	bic	r0, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+	ALT_SMP(W(dsb))
+	ALT_UP(W(nop))
+#endif
 1:
 	mcr	p15, 0, r0, c7, c10, 1		@ clean D / U line
 	add	r0, r0, r2
@@ -288,6 +304,10 @@ ENTRY(v7_dma_flush_range)
 	dcache_line_size r2, r3
 	sub	r3, r2, #1
 	bic	r0, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+	ALT_SMP(W(dsb))
+	ALT_UP(W(nop))
+#endif
 1:
 	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D / U line
 	add	r0, r0, r2
-- 
cgit v1.2.3-18-g5258


From 4dfa33868d9f8595717047eb058322e0999691cc Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sat, 17 Sep 2011 12:50:27 +0100
Subject: ARM: nommu: fix warning with checksyscalls.sh

  CALL    scripts/checksyscalls.sh
<stdin>:46:1: warning: "__IGNORE_migrate_pages" redefined
In file included from <stdin>:2:
arch/arm/include/asm/unistd.h:482:1: warning: this is the location of the previous definition

This is caused because we define __IGNORE_migrate_pages to be 1, but
in the case of nommu, it's defined to be empty.  Fix this by just
defining the __IGNORE_ symbols to be empty.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/unistd.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index 2c04ed5efeb..c60a2944f95 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -478,8 +478,8 @@
 /*
  * Unimplemented (or alternatively implemented) syscalls
  */
-#define __IGNORE_fadvise64_64		1
-#define __IGNORE_migrate_pages		1
+#define __IGNORE_fadvise64_64
+#define __IGNORE_migrate_pages
 
 #endif /* __KERNEL__ */
 #endif /* __ASM_ARM_UNISTD_H */
-- 
cgit v1.2.3-18-g5258


From fad23ddac36920600e2457cf540c4d6383290cd2 Mon Sep 17 00:00:00 2001
From: Alim Akhtar <alim.akhtar@samsung.com>
Date: Mon, 19 Sep 2011 10:27:19 +0900
Subject: ARM: EXYNOS4: register the second instance of pl330 DMAC

Platform data is provided for two instance of pl330 DMAC,
but only one DMAC is register with amba_device.
This patch register the second instance.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/dma.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/dma.c b/arch/arm/mach-exynos4/dma.c
index d57d6625502..9667c61e64f 100644
--- a/arch/arm/mach-exynos4/dma.c
+++ b/arch/arm/mach-exynos4/dma.c
@@ -243,6 +243,7 @@ struct amba_device exynos4_device_pdma1 = {
 static int __init exynos4_dma_init(void)
 {
 	amba_device_register(&exynos4_device_pdma0, &iomem_resource);
+	amba_device_register(&exynos4_device_pdma1, &iomem_resource);
 
 	return 0;
 }
-- 
cgit v1.2.3-18-g5258


From f86147cc8faca81de5edfa1fab07b119c1867322 Mon Sep 17 00:00:00 2001
From: Alim Akhtar <alim.akhtar@samsung.com>
Date: Mon, 19 Sep 2011 10:27:23 +0900
Subject: ARM: S5PV210: register the second instance of pl330 DMAC

Platform data is provided for two instance of pl330 DMAC,
but only one DMAC is register with amba_device.
This patch register the second instance.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s5pv210/dma.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c
index f79d0b06cbf..86b749c18b7 100644
--- a/arch/arm/mach-s5pv210/dma.c
+++ b/arch/arm/mach-s5pv210/dma.c
@@ -254,6 +254,7 @@ struct amba_device s5pv210_device_pdma1 = {
 static int __init s5pv210_dma_init(void)
 {
 	amba_device_register(&s5pv210_device_pdma0, &iomem_resource);
+	amba_device_register(&s5pv210_device_pdma1, &iomem_resource);
 
 	return 0;
 }
-- 
cgit v1.2.3-18-g5258


From d5663e7a404ae97888bb8e7a7376de3fb0878ddd Mon Sep 17 00:00:00 2001
From: Alim Akhtar <alim.akhtar@samsung.com>
Date: Mon, 19 Sep 2011 10:27:26 +0900
Subject: ARM: S5PC100: register the second instance of pl330 DMAC

Platform data is provided for two instance of pl330 DMAC,
but only one DMAC is register with amba_device.
This patch register the second instance.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s5pc100/dma.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c
index ef803e92d35..065a087f5a8 100644
--- a/arch/arm/mach-s5pc100/dma.c
+++ b/arch/arm/mach-s5pc100/dma.c
@@ -260,6 +260,7 @@ struct amba_device s5pc100_device_pdma1 = {
 static int __init s5pc100_dma_init(void)
 {
 	amba_device_register(&s5pc100_device_pdma0, &iomem_resource);
+	amba_device_register(&s5pc100_device_pdma1, &iomem_resource);
 
 	return 0;
 }
-- 
cgit v1.2.3-18-g5258


From d0f0b43f78b88b42e795e4c28f3591cb57590692 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Fri, 19 Aug 2011 22:40:07 +0900
Subject: ARM: S3C64XX: Use module identification for Cragganmore system builds

The Cragganmore system is modular with I2C based identification chips on
the system allowing identification of the system build. Provide a stub I2C
driver which parses the module IDs and uses them to select the appropriate
audio subsystem components to register. To avoid confusion due to having
the mini-driver in the system the driver is placed in a separate file.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c64xx/Kconfig                 |   1 +
 arch/arm/mach-s3c64xx/Makefile                |   2 +-
 arch/arm/mach-s3c64xx/include/mach/crag6410.h |  23 ++++
 arch/arm/mach-s3c64xx/mach-crag6410-module.c  | 173 ++++++++++++++++++++++++++
 arch/arm/mach-s3c64xx/mach-crag6410.c         |  85 +------------
 5 files changed, 203 insertions(+), 81 deletions(-)
 create mode 100644 arch/arm/mach-s3c64xx/include/mach/crag6410.h
 create mode 100644 arch/arm/mach-s3c64xx/mach-crag6410-module.c

(limited to 'arch')

diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index f057b6ae4f9..5552e048c2b 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -288,5 +288,6 @@ config MACH_WLF_CRAGG_6410
 	select S3C_DEV_RTC
 	select S3C64XX_DEV_SPI
 	select S3C24XX_GPIO_EXTRA128
+	select I2C
 	help
 	  Machine support for the Wolfson Cragganmore S3C6410 variant.
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 61b4034a0c2..5fdea6aa50d 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -55,7 +55,7 @@ obj-$(CONFIG_MACH_HMT)		+= mach-hmt.o
 obj-$(CONFIG_MACH_SMARTQ)	+= mach-smartq.o
 obj-$(CONFIG_MACH_SMARTQ5)	+= mach-smartq5.o
 obj-$(CONFIG_MACH_SMARTQ7)	+= mach-smartq7.o
-obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o
+obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o
 
 # device support
 
diff --git a/arch/arm/mach-s3c64xx/include/mach/crag6410.h b/arch/arm/mach-s3c64xx/include/mach/crag6410.h
new file mode 100644
index 00000000000..be9074e17df
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/crag6410.h
@@ -0,0 +1,23 @@
+/* Cragganmore 6410 shared definitions
+ *
+ * Copyright 2011 Wolfson Microelectronics plc
+ *	Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef MACH_CRAG6410_H
+#define MACH_CRAG6410_H
+
+#include <linux/gpio.h>
+
+#define BANFF_PMIC_IRQ_BASE		IRQ_BOARD_START
+#define GLENFARCLAS_PMIC_IRQ_BASE	(IRQ_BOARD_START + 64)
+
+#define PCA935X_GPIO_BASE		GPIO_BOARD_START
+#define CODEC_GPIO_BASE		(GPIO_BOARD_START + 8)
+#define GLENFARCLAS_PMIC_GPIO_BASE	(GPIO_BOARD_START + 16)
+
+#endif
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
new file mode 100644
index 00000000000..0708fa01db9
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -0,0 +1,173 @@
+/* Speyside modules for Cragganmore - board data probing
+ *
+ * Copyright 2011 Wolfson Microelectronics plc
+ *	Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+
+#include <linux/mfd/wm831x/irq.h>
+#include <linux/mfd/wm831x/gpio.h>
+
+#include <sound/wm8996.h>
+#include <sound/wm8962.h>
+#include <sound/wm9081.h>
+
+#include <mach/crag6410.h>
+
+static struct wm8996_retune_mobile_config wm8996_retune[] = {
+	{
+		.name = "Sub LPF",
+		.rate = 48000,
+		.regs = {
+			0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
+			0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
+			0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
+		},
+	},
+	{
+		.name = "Sub HPF",
+		.rate = 48000,
+		.regs = {
+			0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
+			0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
+			0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
+		},
+	},
+};
+
+static struct wm8996_pdata wm8996_pdata __initdata = {
+	.ldo_ena = S3C64XX_GPN(7),
+	.gpio_base = CODEC_GPIO_BASE,
+	.micdet_def = 1,
+	.inl_mode = WM8996_DIFFERRENTIAL_1,
+	.inr_mode = WM8996_DIFFERRENTIAL_1,
+
+	.irq_flags = IRQF_TRIGGER_RISING,
+
+	.gpio_default = {
+		0x8001, /* GPIO1 == ADCLRCLK1 */
+		0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */
+		0x0141, /* GPIO3 == HP_SEL */
+		0x0002, /* GPIO4 == IRQ */
+		0x020e, /* GPIO5 == CLKOUT */
+	},
+
+	.retune_mobile_cfgs = wm8996_retune,
+	.num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune),
+};
+
+static struct wm8962_pdata wm8962_pdata __initdata = {
+	.gpio_init = {
+		0,
+		WM8962_GPIO_FN_OPCLK,
+		WM8962_GPIO_FN_DMICCLK,
+		0,
+		0x8000 | WM8962_GPIO_FN_DMICDAT,
+		WM8962_GPIO_FN_IRQ,    /* Open drain mode */
+	},
+	.irq_active_low = true,
+};
+
+static struct wm9081_pdata wm9081_pdata __initdata = {
+	.irq_high = false,
+	.irq_cmos = false,
+};
+
+static const struct i2c_board_info wm1254_devs[] = {
+	{ I2C_BOARD_INFO("wm8996", 0x1a),
+	  .platform_data = &wm8996_pdata,
+	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+	},
+	{ I2C_BOARD_INFO("wm9081", 0x6c),
+	  .platform_data = &wm9081_pdata, },
+};
+
+static const struct i2c_board_info wm1259_devs[] = {
+	{ I2C_BOARD_INFO("wm8962", 0x1a),
+	  .platform_data = &wm8962_pdata,
+	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+	},
+};
+
+
+static __devinitdata const struct {
+	u8 id;
+	const char *name;
+	const struct i2c_board_info *i2c_devs;
+	int num_i2c_devs;
+} gf_mods[] = {
+	{ .id = 0x01, .name = "1250-EV1 Springbank" },
+	{ .id = 0x02, .name = "1251-EV1 Jura" },
+	{ .id = 0x03, .name = "1252-EV1 Glenlivet" },
+	{ .id = 0x11, .name = "6249-EV2 Glenfarclas", },
+	{ .id = 0x21, .name = "1275-EV1 Mortlach" },
+	{ .id = 0x25, .name = "1274-EV1 Glencadam" },
+	{ .id = 0x31, .name = "1253-EV1 Tomatin", },
+	{ .id = 0x39, .name = "1254-EV1 Dallas Dhu",
+	  .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) },
+	{ .id = 0x3a, .name = "1259-EV1 Tobermory",
+	  .i2c_devs = wm1259_devs, .num_i2c_devs = ARRAY_SIZE(wm1259_devs) },
+	{ .id = 0x3b, .name = "1255-EV1 Kilchoman" },
+	{ .id = 0x3c, .name = "1273-EV1 Longmorn" },
+};
+
+static __devinit int wlf_gf_module_probe(struct i2c_client *i2c,
+					 const struct i2c_device_id *i2c_id)
+{
+	int ret, i, j, id, rev;
+
+	ret = i2c_smbus_read_byte_data(i2c, 0);
+	if (ret < 0) {
+		dev_err(&i2c->dev, "Failed to read ID: %d\n", ret);
+		return ret;
+	}
+
+	id = (ret & 0xfe) >> 2;
+	rev = ret & 0x3;
+	for (i = 0; i < ARRAY_SIZE(gf_mods); i++)
+		if (id == gf_mods[i].id)
+			break;
+
+	if (i < ARRAY_SIZE(gf_mods)) {
+		dev_info(&i2c->dev, "%s revision %d\n",
+			 gf_mods[i].name, rev + 1);
+		for (j = 0; j < gf_mods[i].num_i2c_devs; j++) {
+			if (!i2c_new_device(i2c->adapter,
+					    &(gf_mods[i].i2c_devs[j])))
+				dev_err(&i2c->dev,
+					"Failed to register dev: %d\n", ret);
+		}
+	} else {
+		dev_warn(&i2c->dev, "Unknown module ID %d revision %d\n",
+			 id, rev);
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id wlf_gf_module_id[] = {
+	{ "wlf-gf-module", 0 },
+	{ }
+};
+
+static struct i2c_driver wlf_gf_module_driver = {
+	.driver = {
+		.name = "wlf-gf-module",
+		.owner = THIS_MODULE,
+	},
+	.probe = wlf_gf_module_probe,
+	.id_table = wlf_gf_module_id,
+};
+
+static int __init wlf_gf_module_register(void)
+{
+	return i2c_add_driver(&wlf_gf_module_driver);
+}
+module_init(wlf_gf_module_register);
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 5affb26a198..1ef53b28f68 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -47,6 +47,7 @@
 #include <mach/regs-sys.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-modem.h>
+#include <mach/crag6410.h>
 
 #include <mach/regs-gpio-memport.h>
 
@@ -65,17 +66,6 @@
 #include <plat/iic.h>
 #include <plat/pm.h>
 
-#include <sound/wm8996.h>
-#include <sound/wm8962.h>
-#include <sound/wm9081.h>
-
-#define BANFF_PMIC_IRQ_BASE		IRQ_BOARD_START
-#define GLENFARCLAS_PMIC_IRQ_BASE	(IRQ_BOARD_START + 64)
-
-#define PCA935X_GPIO_BASE		GPIO_BOARD_START
-#define CODEC_GPIO_BASE		(GPIO_BOARD_START + 8)
-#define GLENFARCLAS_PMIC_GPIO_BASE	(GPIO_BOARD_START + 16)
-
 /* serial port setup */
 
 #define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
@@ -623,81 +613,16 @@ static struct wm831x_pdata glenfarclas_pmic_pdata __initdata = {
 	.disable_touch = true,
 };
 
-static struct wm8996_retune_mobile_config wm8996_retune[] = {
-	{
-		.name = "Sub LPF",
-		.rate = 48000,
-		.regs = {
-			0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
-			0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
-			0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
-		},
-	},
-	{
-		.name = "Sub HPF",
-		.rate = 48000,
-		.regs = {
-			0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
-			0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
-			0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
-		},
-	},
-};
-
-static struct wm8996_pdata wm8996_pdata __initdata = {
-	.ldo_ena = S3C64XX_GPN(7),
-	.gpio_base = CODEC_GPIO_BASE,
-	.micdet_def = 1,
-	.inl_mode = WM8996_DIFFERRENTIAL_1,
-	.inr_mode = WM8996_DIFFERRENTIAL_1,
-
-	.irq_flags = IRQF_TRIGGER_RISING,
-
-	.gpio_default = {
-		0x8001, /* GPIO1 == ADCLRCLK1 */
-		0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */
-		0x0141, /* GPIO3 == HP_SEL */
-		0x0002, /* GPIO4 == IRQ */
-		0x020e, /* GPIO5 == CLKOUT */
-	},
-
-	.retune_mobile_cfgs = wm8996_retune,
-	.num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune),
-};
-
-static struct wm8962_pdata wm8962_pdata __initdata = {
-	.gpio_init = {
-		0,
-		WM8962_GPIO_FN_OPCLK,
-		WM8962_GPIO_FN_DMICCLK,
-		0,
-		0x8000 | WM8962_GPIO_FN_DMICDAT,
-		WM8962_GPIO_FN_IRQ,    /* Open drain mode */
-	},
-	.irq_active_low = true,
-};
-
-static struct wm9081_pdata wm9081_pdata __initdata = {
-	.irq_high = false,
-	.irq_cmos = false,
-};
-
 static struct i2c_board_info i2c_devs1[] __initdata = {
 	{ I2C_BOARD_INFO("wm8311", 0x34),
 	  .irq = S3C_EINT(0),
 	  .platform_data = &glenfarclas_pmic_pdata },
 
+	{ I2C_BOARD_INFO("wlf-gf-module", 0x24) },
+	{ I2C_BOARD_INFO("wlf-gf-module", 0x25) },
+	{ I2C_BOARD_INFO("wlf-gf-module", 0x26) },
+
 	{ I2C_BOARD_INFO("wm1250-ev1", 0x27) },
-	{ I2C_BOARD_INFO("wm8996", 0x1a),
-	  .platform_data = &wm8996_pdata,
-	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
-	},
-	{ I2C_BOARD_INFO("wm9081", 0x6c),
-	  .platform_data = &wm9081_pdata, },
-	{ I2C_BOARD_INFO("wm8962", 0x1a),
-	  .platform_data = &wm8962_pdata,
-	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
-	},
 };
 
 static void __init crag6410_map_io(void)
-- 
cgit v1.2.3-18-g5258


From 4ed12b50708875e23ecea191d538e6666b2196eb Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Wed, 31 Aug 2011 08:03:11 +0900
Subject: ARM: S3C64XX: Hook up some additional supplies on Cragganmore

For further modules.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c64xx/mach-crag6410.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 1ef53b28f68..9c287a3e28e 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -285,6 +285,8 @@ static struct platform_device speyside_wm8962_device = {
 static struct regulator_consumer_supply wallvdd_consumers[] = {
 	REGULATOR_SUPPLY("SPKVDD1", "1-001a"),
 	REGULATOR_SUPPLY("SPKVDD2", "1-001a"),
+	REGULATOR_SUPPLY("SPKVDDL", "1-001a"),
+	REGULATOR_SUPPLY("SPKVDDR", "1-001a"),
 };
 
 static struct regulator_init_data wallvdd_data = {
@@ -561,6 +563,9 @@ static struct regulator_init_data pvdd_1v2 __initdata = {
 static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = {
 	REGULATOR_SUPPLY("PLLVDD", "1-001a"),
 	REGULATOR_SUPPLY("DBVDD", "1-001a"),
+	REGULATOR_SUPPLY("DBVDD1", "1-001a"),
+	REGULATOR_SUPPLY("DBVDD2", "1-001a"),
+	REGULATOR_SUPPLY("DBVDD3", "1-001a"),
 	REGULATOR_SUPPLY("CPVDD", "1-001a"),
 	REGULATOR_SUPPLY("AVDD2", "1-001a"),
 	REGULATOR_SUPPLY("DCVDD", "1-001a"),
-- 
cgit v1.2.3-18-g5258


From 3aa7779c748bf340dd122e2d4205f312af977544 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Mon, 5 Sep 2011 14:48:39 +0900
Subject: ARM: S3C64XX: Add devices for Kilchoman audio module on Cragganmore

The Kilchoman audio module carries a WM5100 audio CODEC and WM9081 speaker
amplifier.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c64xx/mach-crag6410-module.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index 0708fa01db9..66668565ee7 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -89,6 +89,14 @@ static const struct i2c_board_info wm1254_devs[] = {
 	  .platform_data = &wm9081_pdata, },
 };
 
+static const struct i2c_board_info wm1255_devs[] = {
+	{ I2C_BOARD_INFO("wm5100", 0x1a),
+	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+	},
+	{ I2C_BOARD_INFO("wm9081", 0x6c),
+	  .platform_data = &wm9081_pdata, },
+};
+
 static const struct i2c_board_info wm1259_devs[] = {
 	{ I2C_BOARD_INFO("wm8962", 0x1a),
 	  .platform_data = &wm8962_pdata,
@@ -114,7 +122,8 @@ static __devinitdata const struct {
 	  .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) },
 	{ .id = 0x3a, .name = "1259-EV1 Tobermory",
 	  .i2c_devs = wm1259_devs, .num_i2c_devs = ARRAY_SIZE(wm1259_devs) },
-	{ .id = 0x3b, .name = "1255-EV1 Kilchoman" },
+	{ .id = 0x3b, .name = "1255-EV1 Kilchoman",
+	  .i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs) },
 	{ .id = 0x3c, .name = "1273-EV1 Longmorn" },
 };
 
-- 
cgit v1.2.3-18-g5258


From 8c051ab47bf3e0d35636d4772f9c0504bebe2fec Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Mon, 5 Sep 2011 14:50:02 +0900
Subject: ARM: S3C64XX: Register Lowland audio device on Cragganmore

The Lowland system is a combination of the Cragganmore CPU module and the
Tomatin and Kilchomin audio modules on Glenfarclas.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c64xx/mach-crag6410.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 9c287a3e28e..a0422a71999 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -277,6 +277,11 @@ static struct platform_device speyside_device = {
 	.id		= -1,
 };
 
+static struct platform_device lowland_device = {
+	.name		= "lowland",
+	.id		= -1,
+};
+
 static struct platform_device speyside_wm8962_device = {
 	.name		= "speyside-wm8962",
 	.id		= -1,
@@ -337,6 +342,7 @@ static struct platform_device *crag6410_devices[] __initdata = {
 	&crag6410_backlight_device,
 	&speyside_device,
 	&speyside_wm8962_device,
+	&lowland_device,
 	&wallvdd_device,
 };
 
-- 
cgit v1.2.3-18-g5258


From 6d8d492ef73433ea8debfba623dc2ee4d627aa7e Mon Sep 17 00:00:00 2001
From: Tomasz Figa <tomasz.figa@gmail.com>
Date: Tue, 23 Aug 2011 11:33:08 +0900
Subject: ARM: S3C64XX: Use S3C64XX_SDMA_SEL register name instead of numeric
 address

This patch adds a definition of S3C64XX_SDMA_SEL register and modifies
the s3c64xx DMA driver to use it instead of a magic register address.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c64xx/dma.c                   | 2 +-
 arch/arm/mach-s3c64xx/include/mach/regs-sys.h | 2 ++
 2 files changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
index 204bfafe4bf..0849f2d3b10 100644
--- a/arch/arm/mach-s3c64xx/dma.c
+++ b/arch/arm/mach-s3c64xx/dma.c
@@ -740,7 +740,7 @@ static int __init s3c64xx_dma_init(void)
 	}
 
 	/* Set all DMA configuration to be DMA, not SDMA */
-	writel(0xffffff, S3C_SYSREG(0x110));
+	writel(0xffffff, S3C64XX_SDMA_SEL);
 
 	/* Register standard DMA controllers */
 	s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000);
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-sys.h b/arch/arm/mach-s3c64xx/include/mach/regs-sys.h
index 69b78d9f83b..774e0de3140 100644
--- a/arch/arm/mach-s3c64xx/include/mach/regs-sys.h
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-sys.h
@@ -21,6 +21,8 @@
 #define S3C64XX_AHB_CON1	S3C_SYSREG(0x104)
 #define S3C64XX_AHB_CON2	S3C_SYSREG(0x108)
 
+#define S3C64XX_SDMA_SEL	S3C_SYSREG(0x110)
+
 #define S3C64XX_OTHERS		S3C_SYSREG(0x900)
 
 #define S3C64XX_OTHERS_USBMASK	(1 << 16)
-- 
cgit v1.2.3-18-g5258


From 348276f4a37ab98559c8c63cbe2a122b7ff65421 Mon Sep 17 00:00:00 2001
From: Tomasz Figa <tomasz.figa@gmail.com>
Date: Tue, 23 Aug 2011 11:33:08 +0900
Subject: ARM: S3C64XX: Save/restore S3C64XX_SDMA_SEL on suspend/resume

This patch makes sure that S3C64XX_SDMA_SEL register is preserved during
sleep mode, as it is critical for DMA operation and the DMA driver alone
does not provide any power management facilities.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c64xx/pm.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index 055e2858b0d..72e3ab2ac08 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -85,6 +85,8 @@ static struct sleep_save misc_save[] = {
 	SAVE_ITEM(S3C64XX_MEM0CONSLP0),
 	SAVE_ITEM(S3C64XX_MEM0CONSLP1),
 	SAVE_ITEM(S3C64XX_MEM1CONSLP),
+
+	SAVE_ITEM(S3C64XX_SDMA_SEL),
 };
 
 void s3c_pm_configure_extint(void)
-- 
cgit v1.2.3-18-g5258


From d9018df00785d7ff52aa7fa8acfacd8a036fc832 Mon Sep 17 00:00:00 2001
From: Tomasz Figa <tomasz.figa@gmail.com>
Date: Tue, 23 Aug 2011 11:33:08 +0900
Subject: ARM: S3C64XX: Save/restore S3C64XX_MODEM_MIFPCON on suspend/resume

This patch makes sure that the LCD bypass state is preserved during sleep mode.
It achieves this by saving the S3C64XX_MODEM_MIFPCON register, which is not
handled by any other code currently.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c64xx/pm.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index 72e3ab2ac08..b375cd5c47c 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -29,6 +29,7 @@
 #include <mach/regs-clock.h>
 #include <mach/regs-syscon-power.h>
 #include <mach/regs-gpio-memport.h>
+#include <mach/regs-modem.h>
 
 #ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
 void s3c_pm_debug_smdkled(u32 set, u32 clear)
@@ -87,6 +88,7 @@ static struct sleep_save misc_save[] = {
 	SAVE_ITEM(S3C64XX_MEM1CONSLP),
 
 	SAVE_ITEM(S3C64XX_SDMA_SEL),
+	SAVE_ITEM(S3C64XX_MODEM_MIFPCON),
 };
 
 void s3c_pm_configure_extint(void)
-- 
cgit v1.2.3-18-g5258


From fb5d375d352ee5830b33ccdff06eb4f5f1d603f5 Mon Sep 17 00:00:00 2001
From: Tomasz Figa <tomasz.figa@gmail.com>
Date: Fri, 19 Aug 2011 11:54:31 +0200
Subject: ARM: S3C64XX: Add support for synchronous clock operation

Some boards based on S3C6410 use synchronous clocking, which means that HCLKx2
and other system clocks are generated from APLL instead of MPLL.

This patch adds support for such boards, by calculating hclk2 depending on
the status of S3C_OTHERS_SYNCMUXSEL bit in S3C64XX_OTHERS regist

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c64xx/clock.c                 | 8 +++++++-
 arch/arm/mach-s3c64xx/include/mach/regs-sys.h | 1 +
 2 files changed, 8 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
index 8cf39e33579..872e68361eb 100644
--- a/arch/arm/mach-s3c64xx/clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -744,7 +744,13 @@ void __init_or_cpufreq s3c6400_setup_clocks(void)
 	printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n",
 	       apll, mpll, epll);
 
-	hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
+	if(__raw_readl(S3C64XX_OTHERS) & S3C64XX_OTHERS_SYNCMUXSEL)
+		/* Synchronous mode */
+		hclk2 = apll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
+	else
+		/* Asynchronous mode */
+		hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
+
 	hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK);
 	pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK);
 
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-sys.h b/arch/arm/mach-s3c64xx/include/mach/regs-sys.h
index 774e0de3140..b91e0209328 100644
--- a/arch/arm/mach-s3c64xx/include/mach/regs-sys.h
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-sys.h
@@ -26,5 +26,6 @@
 #define S3C64XX_OTHERS		S3C_SYSREG(0x900)
 
 #define S3C64XX_OTHERS_USBMASK	(1 << 16)
+#define S3C64XX_OTHERS_SYNCMUXSEL	(1 << 6)
 
 #endif /* _PLAT_REGS_SYS_H */
-- 
cgit v1.2.3-18-g5258


From 480e5926ce3bb61ec229be2dab08bdce8abb8d2e Mon Sep 17 00:00:00 2001
From: Christian Borntraeger <borntraeger@de.ibm.com>
Date: Tue, 20 Sep 2011 17:07:28 +0200
Subject: [S390] kvm: fix address mode switching

598841ca9919d008b520114d8a4378c4ce4e40a1 ([S390] use gmap address
spaces for kvm guest images) changed kvm to use a separate address
space for kvm guests. This address space was switched in __vcpu_run
In some cases (preemption, page fault) there is the possibility that
this address space switch is lost.
The typical symptom was a huge amount of validity intercepts or
random guest addressing exceptions.
Fix this by doing the switch in sie_loop and sie_exit and saving the
address space in the gmap structure itself. Also use the preempt
notifier.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 arch/s390/include/asm/pgtable.h |  2 ++
 arch/s390/kernel/asm-offsets.c  |  3 +++
 arch/s390/kernel/entry64.S      |  6 ++++++
 arch/s390/kvm/kvm-s390.c        |  4 ++--
 arch/s390/mm/pgtable.c          | 10 ++--------
 5 files changed, 15 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index 519eb5f187e..c0cb794bb36 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -658,12 +658,14 @@ static inline void pgste_set_pte(pte_t *ptep, pgste_t pgste)
  * struct gmap_struct - guest address space
  * @mm: pointer to the parent mm_struct
  * @table: pointer to the page directory
+ * @asce: address space control element for gmap page table
  * @crst_list: list of all crst tables used in the guest address space
  */
 struct gmap {
 	struct list_head list;
 	struct mm_struct *mm;
 	unsigned long *table;
+	unsigned long asce;
 	struct list_head crst_list;
 };
 
diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c
index 532fd432215..2b45591e158 100644
--- a/arch/s390/kernel/asm-offsets.c
+++ b/arch/s390/kernel/asm-offsets.c
@@ -10,6 +10,7 @@
 #include <linux/sched.h>
 #include <asm/vdso.h>
 #include <asm/sigp.h>
+#include <asm/pgtable.h>
 
 /*
  * Make sure that the compiler is new enough. We want a compiler that
@@ -126,6 +127,7 @@ int main(void)
 	DEFINE(__LC_KERNEL_STACK, offsetof(struct _lowcore, kernel_stack));
 	DEFINE(__LC_ASYNC_STACK, offsetof(struct _lowcore, async_stack));
 	DEFINE(__LC_PANIC_STACK, offsetof(struct _lowcore, panic_stack));
+	DEFINE(__LC_USER_ASCE, offsetof(struct _lowcore, user_asce));
 	DEFINE(__LC_INT_CLOCK, offsetof(struct _lowcore, int_clock));
 	DEFINE(__LC_MCCK_CLOCK, offsetof(struct _lowcore, mcck_clock));
 	DEFINE(__LC_MACHINE_FLAGS, offsetof(struct _lowcore, machine_flags));
@@ -151,6 +153,7 @@ int main(void)
 	DEFINE(__LC_VDSO_PER_CPU, offsetof(struct _lowcore, vdso_per_cpu_data));
 	DEFINE(__LC_GMAP, offsetof(struct _lowcore, gmap));
 	DEFINE(__LC_CMF_HPP, offsetof(struct _lowcore, cmf_hpp));
+	DEFINE(__GMAP_ASCE, offsetof(struct gmap, asce));
 #endif /* CONFIG_32BIT */
 	return 0;
 }
diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S
index 5f729d627ce..713da076053 100644
--- a/arch/s390/kernel/entry64.S
+++ b/arch/s390/kernel/entry64.S
@@ -1076,6 +1076,11 @@ sie_loop:
 	lg	%r14,__LC_THREAD_INFO		# pointer thread_info struct
 	tm	__TI_flags+7(%r14),_TIF_EXIT_SIE
 	jnz	sie_exit
+	lg	%r14,__LC_GMAP			# get gmap pointer
+	ltgr	%r14,%r14
+	jz	sie_gmap
+	lctlg	%c1,%c1,__GMAP_ASCE(%r14)	# load primary asce
+sie_gmap:
 	lg	%r14,__SF_EMPTY(%r15)		# get control block pointer
 	SPP	__SF_EMPTY(%r15)		# set guest id
 	sie	0(%r14)
@@ -1083,6 +1088,7 @@ sie_done:
 	SPP	__LC_CMF_HPP			# set host id
 	lg	%r14,__LC_THREAD_INFO		# pointer thread_info struct
 sie_exit:
+	lctlg	%c1,%c1,__LC_USER_ASCE		# load primary asce
 	ni	__TI_flags+6(%r14),255-(_TIF_SIE>>8)
 	lg	%r14,__SF_EMPTY+8(%r15)		# load guest register save area
 	stmg	%r0,%r13,0(%r14)		# save guest gprs 0-13
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index f17296e4fc8..b4eced131e5 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -263,10 +263,12 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 	vcpu->arch.guest_fpregs.fpc &= FPC_VALID_MASK;
 	restore_fp_regs(&vcpu->arch.guest_fpregs);
 	restore_access_regs(vcpu->arch.guest_acrs);
+	gmap_enable(vcpu->arch.gmap);
 }
 
 void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
 {
+	gmap_disable(vcpu->arch.gmap);
 	save_fp_regs(&vcpu->arch.guest_fpregs);
 	save_access_regs(vcpu->arch.guest_acrs);
 	restore_fp_regs(&vcpu->arch.host_fpregs);
@@ -461,7 +463,6 @@ static void __vcpu_run(struct kvm_vcpu *vcpu)
 	local_irq_disable();
 	kvm_guest_enter();
 	local_irq_enable();
-	gmap_enable(vcpu->arch.gmap);
 	VCPU_EVENT(vcpu, 6, "entering sie flags %x",
 		   atomic_read(&vcpu->arch.sie_block->cpuflags));
 	if (sie64a(vcpu->arch.sie_block, vcpu->arch.guest_gprs)) {
@@ -470,7 +471,6 @@ static void __vcpu_run(struct kvm_vcpu *vcpu)
 	}
 	VCPU_EVENT(vcpu, 6, "exit sie icptcode %d",
 		   vcpu->arch.sie_block->icptcode);
-	gmap_disable(vcpu->arch.gmap);
 	local_irq_disable();
 	kvm_guest_exit();
 	local_irq_enable();
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index 4d1f2bce87b..f69ff3c1349 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -160,6 +160,8 @@ struct gmap *gmap_alloc(struct mm_struct *mm)
 	table = (unsigned long *) page_to_phys(page);
 	crst_table_init(table, _REGION1_ENTRY_EMPTY);
 	gmap->table = table;
+	gmap->asce = _ASCE_TYPE_REGION1 | _ASCE_TABLE_LENGTH |
+		     _ASCE_USER_BITS | __pa(table);
 	list_add(&gmap->list, &mm->context.gmap_list);
 	return gmap;
 
@@ -240,10 +242,6 @@ EXPORT_SYMBOL_GPL(gmap_free);
  */
 void gmap_enable(struct gmap *gmap)
 {
-	/* Load primary space page table origin. */
-	S390_lowcore.user_asce = _ASCE_TYPE_REGION1 | _ASCE_TABLE_LENGTH |
-				 _ASCE_USER_BITS | __pa(gmap->table);
-	asm volatile("lctlg 1,1,%0\n" : : "m" (S390_lowcore.user_asce) );
 	S390_lowcore.gmap = (unsigned long) gmap;
 }
 EXPORT_SYMBOL_GPL(gmap_enable);
@@ -254,10 +252,6 @@ EXPORT_SYMBOL_GPL(gmap_enable);
  */
 void gmap_disable(struct gmap *gmap)
 {
-	/* Load primary space page table origin. */
-	S390_lowcore.user_asce =
-		gmap->mm->context.asce_bits | __pa(gmap->mm->pgd);
-	asm volatile("lctlg 1,1,%0\n" : : "m" (S390_lowcore.user_asce) );
 	S390_lowcore.gmap = 0UL;
 }
 EXPORT_SYMBOL_GPL(gmap_disable);
-- 
cgit v1.2.3-18-g5258


From b6cf8788a3382c2000743a0e393bcc8aeb0601cb Mon Sep 17 00:00:00 2001
From: Christian Borntraeger <borntraeger@de.ibm.com>
Date: Tue, 20 Sep 2011 17:07:29 +0200
Subject: [S390] kvm: extension capability for new address space layout

598841ca9919d008b520114d8a4378c4ce4e40a1 ([S390] use gmap address
spaces for kvm guest images) changed kvm on s390 to use a separate
address space for kvm guests. We can now put KVM guests anywhere
in the user address mode with a size up to 8PB - as long as the
memory is 1MB-aligned. This change was done without KVM extension
capability bit.
The change was added after 3.0, but we still have a chance to add
a feature bit before 3.1 (keeping the releases in a sane state).
We use number 71 to avoid collisions with other pending kvm patches
as requested by Alexander Graf.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Avi Kivity <avi@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 arch/s390/kvm/kvm-s390.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index b4eced131e5..dc2b580e27b 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -123,6 +123,7 @@ int kvm_dev_ioctl_check_extension(long ext)
 
 	switch (ext) {
 	case KVM_CAP_S390_PSW:
+	case KVM_CAP_S390_GMAP:
 		r = 1;
 		break;
 	default:
-- 
cgit v1.2.3-18-g5258


From a0638eb6a2979840ff4cde19b100e96b97a91dfd Mon Sep 17 00:00:00 2001
From: Stephen Warren <swarren@nvidia.com>
Date: Tue, 20 Sep 2011 10:46:25 -0600
Subject: arm/dt: Tegra: Update SDHCI nodes to match bindings

The bindings were recently updated to have separate properties for each
type of GPIO. Update the Device Tree source to match that.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/boot/dts/tegra-harmony.dts  | 12 ++++++------
 arch/arm/boot/dts/tegra-seaboard.dts |  6 +++---
 2 files changed, 9 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts
index 4c053340ce3..e5818668d09 100644
--- a/arch/arm/boot/dts/tegra-harmony.dts
+++ b/arch/arm/boot/dts/tegra-harmony.dts
@@ -57,14 +57,14 @@
 	};
 
 	sdhci@c8000200 {
-		gpios = <&gpio 69 0>, /* cd, gpio PI5 */
-			<&gpio 57 0>, /* wp, gpio PH1 */
-			<&gpio 155 0>; /* power, gpio PT3 */
+		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+		power-gpios = <&gpio 155 0>; /* gpio PT3 */
 	};
 
 	sdhci@c8000600 {
-		gpios = <&gpio 58 0>, /* cd, gpio PH2 */
-			<&gpio 59 0>, /* wp, gpio PH3 */
-			<&gpio 70 0>; /* power, gpio PI6 */
+		cd-gpios = <&gpio 58 0>; /* gpio PH2 */
+		wp-gpios = <&gpio 59 0>; /* gpio PH3 */
+		power-gpios = <&gpio 70 0>; /* gpio PI6 */
 	};
 };
diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts
index 1940cae0074..64cedca6fc7 100644
--- a/arch/arm/boot/dts/tegra-seaboard.dts
+++ b/arch/arm/boot/dts/tegra-seaboard.dts
@@ -21,8 +21,8 @@
 	};
 
 	sdhci@c8000400 {
-		gpios = <&gpio 69 0>, /* cd, gpio PI5 */
-			<&gpio 57 0>, /* wp, gpio PH1 */
-			<&gpio 70 0>; /* power, gpio PI6 */
+		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+		power-gpios = <&gpio 70 0>; /* gpio PI6 */
 	};
 };
-- 
cgit v1.2.3-18-g5258


From b71d8429ec364ef8eada011dded2e23aaecde53e Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Sun, 4 Sep 2011 23:40:08 +0200
Subject: mach-integrator: fix VGA base regression

The changes introduced in commit
cc22b4c18540e5e8bf55c7d124044f9317527d3c
"ARM: set vga memory base at run-time"

Makes the Integrator/AP freeze completely. I appears that
this is due to the VGA base address being assigned at PCI
init time, while this base is needed earlier than that.
Moving the initialization of the base address to the
.map_io function solves this problem.

Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/mach-integrator/integrator_ap.c | 2 ++
 arch/arm/mach-integrator/pci_v3.c        | 2 --
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index fcf0ae95651..8cdc730dcb3 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -32,6 +32,7 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/mtd/physmap.h>
+#include <video/vga.h>
 
 #include <mach/hardware.h>
 #include <mach/platform.h>
@@ -154,6 +155,7 @@ static struct map_desc ap_io_desc[] __initdata = {
 static void __init ap_map_io(void)
 {
 	iotable_init(ap_io_desc, ARRAY_SIZE(ap_io_desc));
+	vga_base = PCI_MEMORY_VADDR;
 }
 
 #define INTEGRATOR_SC_VALID_INT	0x003fffff
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index dd56bfb351e..11b86e5b71c 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -27,7 +27,6 @@
 #include <linux/spinlock.h>
 #include <linux/init.h>
 #include <linux/io.h>
-#include <video/vga.h>
 
 #include <mach/hardware.h>
 #include <mach/platform.h>
@@ -505,7 +504,6 @@ void __init pci_v3_preinit(void)
 
 	pcibios_min_io = 0x6000;
 	pcibios_min_mem = 0x00100000;
-	vga_base = PCI_MEMORY_VADDR;
 
 	/*
 	 * Hook in our fault handler for PCI errors
-- 
cgit v1.2.3-18-g5258


From 6760b109603c794e4bd281c0014fef069c019b6a Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Tue, 20 Sep 2011 23:35:15 +0100
Subject: ARM: fix vmlinux.lds.S discarding sections

We are seeing linker errors caused by sections being discarded, despite
the linker script trying to keep them.  The result is (eg):

`.exit.text' referenced in section `.alt.smp.init' of drivers/built-in.o: defined in discarded section `.exit.text' of drivers/built-in.o
`.exit.text' referenced in section `.alt.smp.init' of net/built-in.o: defined in discarded section `.exit.text' of net/built-in.o

This is the relevent part of the linker script (reformatted to make it
clearer):
| SECTIONS
| {
| /*
| * unwind exit sections must be discarded before the rest of the
| * unwind sections get included.
| */
| /DISCARD/ : {
| *(.ARM.exidx.exit.text)
| *(.ARM.extab.exit.text)
| }
| ...
| .exit.text : {
| *(.exit.text)
| *(.memexit.text)
| }
| ...
| /DISCARD/ : {
| *(.exit.text)
| *(.memexit.text)
| *(.exit.data)
| *(.memexit.data)
| *(.memexit.rodata)
| *(.exitcall.exit)
| *(.discard)
| *(.discard.*)
| }
| }

Now, this is what the linker manual says about discarded output sections:

|    The special output section name `/DISCARD/' may be used to discard
| input sections.  Any input sections which are assigned to an output
| section named `/DISCARD/' are not included in the output file.

No questions, no exceptions. It doesn't say "unless they are listed
before the /DISCARD/ section." Now, this is what asn-generic/vmlinux.lds.S
says:
| /*
|  * Default discarded sections.
|  *
|  * Some archs want to discard exit text/data at runtime rather than
|  * link time due to cross-section references such as alt instructions,
|  * bug table, eh_frame, etc. DISCARDS must be the last of output
|  * section definitions so that such archs put those in earlier section
|  * definitions.
|  */

And guess what - the list _always_ includes .exit.text etc.

Now, what's actually happening is that the linker is reading the script,
and it finds the first /DISCARD/ output section at the beginning of the
script. It continues reading the script, and finds the 'DISCARD' macro
at the end, which having been postprocessed results in another
/DISCARD/ output section. As the linker already contains the earlier
/DISCARD/ output section, it adds it to that existing section, so it
effectively is placed at the start. This can be seen by using the -M
option to ld:

| Linker script and memory map
|
|                 0xc037c080                jiffies = jiffies_64
|
| /DISCARD/
|  *(.ARM.exidx.exit.text)
|  *(.ARM.extab.exit.text)
|  *(.exit.text)
|  *(.memexit.text)
|  *(.exit.data)
|  *(.memexit.data)
|  *(.memexit.rodata)
|  *(.exitcall.exit)
|  *(.discard)
|  *(.discard.*)
|
|                 0xc0008000                . = 0xc0008000
|
| .head.text      0xc0008000      0x1d0
|                 0xc0008000                _text = .
|  *(.head.text)
|  .head.text     0xc0008000      0x1d0 arch/arm/kernel/head.o
|                 0xc0008000                stext
|
| .text           0xc0008200   0x2d78d0
|                 0xc0008200                _stext = .
|                 0xc0008200                __exception_text_start = .
|  *(.exception.text)
|  .exception.text
| ...

As you can see, all the discarded sections are grouped together - and
as a result of it being the first output section, they all appear before
any other section.

The result is that not only is the unwind information discarded (as
intended), but also the .exit.text, despite us wanting to have the
.exit.text preserved.

We can't move the unwind information elsewhere, because it'll then be
included even when we do actually discard the .exit.text (and similar)
sections.

So, work around this by avoiding the generic DISCARDS macro, and instead
conditionalize the sections to be discarded ourselves.  This avoids the
ambiguity in how the linker assigns input sections to output sections,
making our script less dependent on undocumented linker behaviour.

Reported-by: Rob Herring <robherring2@gmail.com>
Tested-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/vmlinux.lds.S | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index bf977f8514f..4e66f62b8d4 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -23,8 +23,10 @@
 
 #if defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK)
 #define ARM_EXIT_KEEP(x)	x
+#define ARM_EXIT_DISCARD(x)
 #else
 #define ARM_EXIT_KEEP(x)
+#define ARM_EXIT_DISCARD(x)	x
 #endif
 
 OUTPUT_ARCH(arm)
@@ -39,6 +41,11 @@ jiffies = jiffies_64 + 4;
 SECTIONS
 {
 	/*
+	 * XXX: The linker does not define how output sections are
+	 * assigned to input sections when there are multiple statements
+	 * matching the same input section name.  There is no documented
+	 * order of matching.
+	 *
 	 * unwind exit sections must be discarded before the rest of the
 	 * unwind sections get included.
 	 */
@@ -47,6 +54,9 @@ SECTIONS
 		*(.ARM.extab.exit.text)
 		ARM_CPU_DISCARD(*(.ARM.exidx.cpuexit.text))
 		ARM_CPU_DISCARD(*(.ARM.extab.cpuexit.text))
+		ARM_EXIT_DISCARD(EXIT_TEXT)
+		ARM_EXIT_DISCARD(EXIT_DATA)
+		EXIT_CALL
 #ifndef CONFIG_HOTPLUG
 		*(.ARM.exidx.devexit.text)
 		*(.ARM.extab.devexit.text)
@@ -58,6 +68,8 @@ SECTIONS
 #ifndef CONFIG_SMP_ON_UP
 		*(.alt.smp.init)
 #endif
+		*(.discard)
+		*(.discard.*)
 	}
 
 #ifdef CONFIG_XIP_KERNEL
@@ -279,9 +291,6 @@ SECTIONS
 
 	STABS_DEBUG
 	.comment 0 : { *(.comment) }
-
-	/* Default discards */
-	DISCARDS
 }
 
 /*
-- 
cgit v1.2.3-18-g5258


From 536137bc9ff1738a7bee9b31047a7cd56860180e Mon Sep 17 00:00:00 2001
From: Kukjin Kim <kgene.kim@samsung.com>
Date: Fri, 26 Aug 2011 11:03:03 +0900
Subject: gpio/s3c24xx: move gpio driver into drivers/gpio/

Cc: Ben Dooks <ben-linux@fluff.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c2410/Kconfig   |   6 --
 arch/arm/mach-s3c2410/Makefile  |   1 -
 arch/arm/mach-s3c2412/Kconfig   |   1 -
 arch/arm/mach-s3c2412/Makefile  |   1 -
 arch/arm/mach-s3c2440/Kconfig   |   2 -
 arch/arm/plat-s3c24xx/Makefile  |   2 -
 arch/arm/plat-s3c24xx/gpio.c    |  96 -----------------
 arch/arm/plat-s3c24xx/gpiolib.c | 229 ----------------------------------------
 8 files changed, 338 deletions(-)
 delete mode 100644 arch/arm/plat-s3c24xx/gpio.c
 delete mode 100644 arch/arm/plat-s3c24xx/gpiolib.c

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 7245a55795d..3700cf32af0 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -8,7 +8,6 @@ config CPU_S3C2410
 	select CPU_ARM920T
 	select S3C_GPIO_PULL_UP
 	select S3C2410_CLOCK
-	select S3C2410_GPIO
 	select CPU_LLSERIAL_S3C2410
 	select S3C2410_PM if PM
 	select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
@@ -28,11 +27,6 @@ config S3C2410_PM
 	help
 	  Power Management code common to S3C2410 and better
 
-config S3C2410_GPIO
-	bool
-	help
-	  GPIO code for S3C2410 and similar processors
-
 config SIMTEC_NOR
 	bool
 	help
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 81695353d8f..782fd81144e 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -13,7 +13,6 @@ obj-$(CONFIG_CPU_S3C2410)	+= s3c2410.o
 obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C2410_PM)	+= pm.o sleep.o
-obj-$(CONFIG_S3C2410_GPIO)	+= gpio.o
 obj-$(CONFIG_S3C2410_CPUFREQ)	+= cpu-freq.o
 obj-$(CONFIG_S3C2410_PLLTABLE)	+= pll.o
 
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index c2cf4e56998..b8b9029e9f2 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -9,7 +9,6 @@ config CPU_S3C2412
 	select CPU_LLSERIAL_S3C2440
 	select S3C2412_PM if PM
 	select S3C2412_DMA if S3C2410_DMA
-	select S3C2410_GPIO
 	help
 	  Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
 
diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile
index 6c48a91ea39..7e4d95fa8a9 100644
--- a/arch/arm/mach-s3c2412/Makefile
+++ b/arch/arm/mach-s3c2412/Makefile
@@ -12,7 +12,6 @@ obj-				:=
 obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o
 obj-$(CONFIG_CPU_S3C2412)	+= irq.o
 obj-$(CONFIG_CPU_S3C2412)	+= clock.o
-obj-$(CONFIG_CPU_S3C2412)	+= gpio.o
 obj-$(CONFIG_S3C2412_DMA)	+= dma.o
 obj-$(CONFIG_S3C2412_PM)	+= pm.o
 obj-$(CONFIG_S3C2412_PM_SLEEP)	+= sleep.o
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 50825a3f91c..c461fb8e15c 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -8,7 +8,6 @@ config CPU_S3C2440
 	select S3C_GPIO_PULL_UP
 	select S3C2410_CLOCK
 	select S3C2410_PM if PM
-	select S3C2410_GPIO
 	select S3C2440_DMA if S3C2410_DMA
 	select CPU_S3C244X
 	select CPU_LLSERIAL_S3C2440
@@ -20,7 +19,6 @@ config CPU_S3C2442
 	select CPU_ARM920T
 	select S3C_GPIO_PULL_DOWN
 	select S3C2410_CLOCK
-	select S3C2410_GPIO
 	select S3C2410_PM if PM
 	select CPU_S3C244X
 	select CPU_LLSERIAL_S3C2440
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 0291bd6e236..e4f46495ed3 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -15,8 +15,6 @@ obj-				:=
 obj-y				+= cpu.o
 obj-y				+= irq.o
 obj-y				+= devs.o
-obj-y				+= gpio.o
-obj-y				+= gpiolib.o
 obj-y				+= clock.o
 obj-$(CONFIG_S3C24XX_DCLK)	+= clock-dclk.o
 
diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c
deleted file mode 100644
index 2f3d7c089df..00000000000
--- a/arch/arm/plat-s3c24xx/gpio.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/gpio.c
- *
- * Copyright (c) 2004-2010 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX GPIO support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/gpio-fns.h>
-#include <asm/irq.h>
-
-#include <mach/regs-gpio.h>
-
-#include <plat/gpio-core.h>
-
-/* gpiolib wrappers until these are totally eliminated */
-
-void s3c2410_gpio_pullup(unsigned int pin, unsigned int to)
-{
-	int ret;
-
-	WARN_ON(to);	/* should be none of these left */
-
-	if (!to) {
-		/* if pull is enabled, try first with up, and if that
-		 * fails, try using down */
-
-		ret = s3c_gpio_setpull(pin, S3C_GPIO_PULL_UP);
-		if (ret)
-			s3c_gpio_setpull(pin, S3C_GPIO_PULL_DOWN);
-	} else {
-		s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE);
-	}
-}
-EXPORT_SYMBOL(s3c2410_gpio_pullup);
-
-void s3c2410_gpio_setpin(unsigned int pin, unsigned int to)
-{
-	/* do this via gpiolib until all users removed */
-
-	gpio_request(pin, "temporary");
-	gpio_set_value(pin, to);
-	gpio_free(pin);
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_setpin);
-
-unsigned int s3c2410_gpio_getpin(unsigned int pin)
-{
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
-	unsigned long offs = pin - chip->chip.base;
-
-	return __raw_readl(chip->base + 0x04) & (1<< offs);
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_getpin);
-
-unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change)
-{
-	unsigned long flags;
-	unsigned long misccr;
-
-	local_irq_save(flags);
-	misccr = __raw_readl(S3C24XX_MISCCR);
-	misccr &= ~clear;
-	misccr ^= change;
-	__raw_writel(misccr, S3C24XX_MISCCR);
-	local_irq_restore(flags);
-
-	return misccr;
-}
-
-EXPORT_SYMBOL(s3c2410_modify_misccr);
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
deleted file mode 100644
index 243b6411050..00000000000
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ /dev/null
@@ -1,229 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/gpiolib.c
- *
- * Copyright (c) 2008-2010 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX GPIOlib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/sysdev.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <plat/pm.h>
-
-#include <mach/regs-gpio.h>
-
-static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset)
-{
-	return -EINVAL;
-}
-
-static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip,
-					unsigned offset, int value)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long flags;
-	unsigned long dat;
-	unsigned long con;
-
-	local_irq_save(flags);
-
-	con = __raw_readl(base + 0x00);
-	dat = __raw_readl(base + 0x04);
-
-	dat &= ~(1 << offset);
-	if (value)
-		dat |= 1 << offset;
-
-	__raw_writel(dat, base + 0x04);
-
-	con &= ~(1 << offset);
-
-	__raw_writel(con, base + 0x00);
-	__raw_writel(dat, base + 0x04);
-
-	local_irq_restore(flags);
-	return 0;
-}
-
-static int s3c24xx_gpiolib_bankf_toirq(struct gpio_chip *chip, unsigned offset)
-{
-	if (offset < 4)
-		return IRQ_EINT0 + offset;
-	
-	if (offset < 8)
-		return IRQ_EINT4 + offset - 4;
-	
-	return -EINVAL;
-}
-
-static struct s3c_gpio_cfg s3c24xx_gpiocfg_banka = {
-	.set_config	= s3c_gpio_setcfg_s3c24xx_a,
-	.get_config	= s3c_gpio_getcfg_s3c24xx_a,
-};
-
-struct s3c_gpio_cfg s3c24xx_gpiocfg_default = {
-	.set_config	= s3c_gpio_setcfg_s3c24xx,
-	.get_config	= s3c_gpio_getcfg_s3c24xx,
-};
-
-struct s3c_gpio_chip s3c24xx_gpios[] = {
-	[0] = {
-		.base	= S3C2410_GPACON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_1bit),
-		.config	= &s3c24xx_gpiocfg_banka,
-		.chip	= {
-			.base			= S3C2410_GPA(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOA",
-			.ngpio			= 24,
-			.direction_input	= s3c24xx_gpiolib_banka_input,
-			.direction_output	= s3c24xx_gpiolib_banka_output,
-		},
-	},
-	[1] = {
-		.base	= S3C2410_GPBCON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.chip	= {
-			.base			= S3C2410_GPB(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOB",
-			.ngpio			= 16,
-		},
-	},
-	[2] = {
-		.base	= S3C2410_GPCCON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.chip	= {
-			.base			= S3C2410_GPC(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOC",
-			.ngpio			= 16,
-		},
-	},
-	[3] = {
-		.base	= S3C2410_GPDCON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.chip	= {
-			.base			= S3C2410_GPD(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOD",
-			.ngpio			= 16,
-		},
-	},
-	[4] = {
-		.base	= S3C2410_GPECON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.chip	= {
-			.base			= S3C2410_GPE(0),
-			.label			= "GPIOE",
-			.owner			= THIS_MODULE,
-			.ngpio			= 16,
-		},
-	},
-	[5] = {
-		.base	= S3C2410_GPFCON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.chip	= {
-			.base			= S3C2410_GPF(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOF",
-			.ngpio			= 8,
-			.to_irq			= s3c24xx_gpiolib_bankf_toirq,
-		},
-	},
-	[6] = {
-		.base	= S3C2410_GPGCON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.irq_base = IRQ_EINT8,
-		.chip	= {
-			.base			= S3C2410_GPG(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOG",
-			.ngpio			= 16,
-			.to_irq			= samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= S3C2410_GPHCON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.chip	= {
-			.base			= S3C2410_GPH(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOH",
-			.ngpio			= 11,
-		},
-	},
-		/* GPIOS for the S3C2443 and later devices. */
-	{
-		.base	= S3C2440_GPJCON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.chip	= {
-			.base			= S3C2410_GPJ(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOJ",
-			.ngpio			= 16,
-		},
-	}, {
-		.base	= S3C2443_GPKCON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.chip	= {
-			.base			= S3C2410_GPK(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOK",
-			.ngpio			= 16,
-		},
-	}, {
-		.base	= S3C2443_GPLCON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.chip	= {
-			.base			= S3C2410_GPL(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOL",
-			.ngpio			= 15,
-		},
-	}, {
-		.base	= S3C2443_GPMCON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.chip	= {
-			.base			= S3C2410_GPM(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOM",
-			.ngpio			= 2,
-		},
-	},
-};
-
-
-static __init int s3c24xx_gpiolib_init(void)
-{
-	struct s3c_gpio_chip *chip = s3c24xx_gpios;
-	int gpn;
-
-	for (gpn = 0; gpn < ARRAY_SIZE(s3c24xx_gpios); gpn++, chip++) {
-		if (!chip->config)
-			chip->config = &s3c24xx_gpiocfg_default;
-
-		s3c_gpiolib_add(chip);
-	}
-
-	return 0;
-}
-
-core_initcall(s3c24xx_gpiolib_init);
-- 
cgit v1.2.3-18-g5258


From ec080059c1ce7bfdc8453bf4f3328ac0315a66a1 Mon Sep 17 00:00:00 2001
From: Kukjin Kim <kgene.kim@samsung.com>
Date: Fri, 26 Aug 2011 11:06:25 +0900
Subject: gpio/s3c64xx: move gpio driver into drivers/gpio/

Cc: Ben Dooks <ben-linux@fluff.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c64xx/Makefile  |   1 -
 arch/arm/mach-s3c64xx/gpiolib.c | 290 ----------------------------------------
 2 files changed, 291 deletions(-)
 delete mode 100644 arch/arm/mach-s3c64xx/gpiolib.c

(limited to 'arch')

diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 61b4034a0c2..f0102d7b531 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -13,7 +13,6 @@ obj-				:=
 # Core files
 obj-y				+= cpu.o
 obj-y				+= clock.o
-obj-y				+= gpiolib.o
 
 # Core support for S3C6400 system
 
diff --git a/arch/arm/mach-s3c64xx/gpiolib.c b/arch/arm/mach-s3c64xx/gpiolib.c
deleted file mode 100644
index 92b09085caa..00000000000
--- a/arch/arm/mach-s3c64xx/gpiolib.c
+++ /dev/null
@@ -1,290 +0,0 @@
-/* arch/arm/plat-s3c64xx/gpiolib.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64XX - GPIOlib support 
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <mach/regs-gpio.h>
-
-/* GPIO bank summary:
- *
- * Bank	GPIOs	Style	SlpCon	ExtInt Group
- * A	8	4Bit	Yes	1
- * B	7	4Bit	Yes	1
- * C	8	4Bit	Yes	2
- * D	5	4Bit	Yes	3
- * E	5	4Bit	Yes	None
- * F	16	2Bit	Yes	4 [1]
- * G	7	4Bit	Yes	5
- * H	10	4Bit[2]	Yes	6
- * I	16	2Bit	Yes	None
- * J	12	2Bit	Yes	None
- * K	16	4Bit[2]	No	None
- * L	15	4Bit[2] No	None
- * M	6	4Bit	No	IRQ_EINT
- * N	16	2Bit	No	IRQ_EINT
- * O	16	2Bit	Yes	7
- * P	15	2Bit	Yes	8
- * Q	9	2Bit	Yes	9
- *
- * [1] BANKF pins 14,15 do not form part of the external interrupt sources
- * [2] BANK has two control registers, GPxCON0 and GPxCON1
- */
-
-static struct s3c_gpio_cfg gpio_4bit_cfg_noint = {
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.get_config	= s3c_gpio_getcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_4bit_cfg_eint0111 = {
-	.cfg_eint	= 7,
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.get_config	= s3c_gpio_getcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = {
-	.cfg_eint	= 3,
-	.get_config	= s3c_gpio_getcfg_s3c64xx_4bit,
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin)
-{
-	return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
-}
-
-static struct s3c_gpio_chip gpio_4bit[] = {
-	{
-		.base	= S3C64XX_GPA_BASE,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPA(0),
-			.ngpio	= S3C64XX_GPIO_A_NR,
-			.label	= "GPA",
-		},
-	}, {
-		.base	= S3C64XX_GPB_BASE,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPB(0),
-			.ngpio	= S3C64XX_GPIO_B_NR,
-			.label	= "GPB",
-		},
-	}, {
-		.base	= S3C64XX_GPC_BASE,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPC(0),
-			.ngpio	= S3C64XX_GPIO_C_NR,
-			.label	= "GPC",
-		},
-	}, {
-		.base	= S3C64XX_GPD_BASE,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPD(0),
-			.ngpio	= S3C64XX_GPIO_D_NR,
-			.label	= "GPD",
-		},
-	}, {
-		.base	= S3C64XX_GPE_BASE,
-		.config	= &gpio_4bit_cfg_noint,
-		.chip	= {
-			.base	= S3C64XX_GPE(0),
-			.ngpio	= S3C64XX_GPIO_E_NR,
-			.label	= "GPE",
-		},
-	}, {
-		.base	= S3C64XX_GPG_BASE,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPG(0),
-			.ngpio	= S3C64XX_GPIO_G_NR,
-			.label	= "GPG",
-		},
-	}, {
-		.base	= S3C64XX_GPM_BASE,
-		.config	= &gpio_4bit_cfg_eint0011,
-		.chip	= {
-			.base	= S3C64XX_GPM(0),
-			.ngpio	= S3C64XX_GPIO_M_NR,
-			.label	= "GPM",
-			.to_irq = s3c64xx_gpio2int_gpm,
-		},
-	},
-};
-
-static int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin)
-{
-	return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
-}
-
-static struct s3c_gpio_chip gpio_4bit2[] = {
-	{
-		.base	= S3C64XX_GPH_BASE + 0x4,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPH(0),
-			.ngpio	= S3C64XX_GPIO_H_NR,
-			.label	= "GPH",
-		},
-	}, {
-		.base	= S3C64XX_GPK_BASE + 0x4,
-		.config	= &gpio_4bit_cfg_noint,
-		.chip	= {
-			.base	= S3C64XX_GPK(0),
-			.ngpio	= S3C64XX_GPIO_K_NR,
-			.label	= "GPK",
-		},
-	}, {
-		.base	= S3C64XX_GPL_BASE + 0x4,
-		.config	= &gpio_4bit_cfg_eint0011,
-		.chip	= {
-			.base	= S3C64XX_GPL(0),
-			.ngpio	= S3C64XX_GPIO_L_NR,
-			.label	= "GPL",
-			.to_irq = s3c64xx_gpio2int_gpl,
-		},
-	},
-};
-
-static struct s3c_gpio_cfg gpio_2bit_cfg_noint = {
-	.set_config	= s3c_gpio_setcfg_s3c24xx,
-	.get_config	= s3c_gpio_getcfg_s3c24xx,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_2bit_cfg_eint10 = {
-	.cfg_eint	= 2,
-	.set_config	= s3c_gpio_setcfg_s3c24xx,
-	.get_config	= s3c_gpio_getcfg_s3c24xx,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = {
-	.cfg_eint	= 3,
-	.set_config	= s3c_gpio_setcfg_s3c24xx,
-	.get_config	= s3c_gpio_getcfg_s3c24xx,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_chip gpio_2bit[] = {
-	{
-		.base	= S3C64XX_GPF_BASE,
-		.config	= &gpio_2bit_cfg_eint11,
-		.chip	= {
-			.base	= S3C64XX_GPF(0),
-			.ngpio	= S3C64XX_GPIO_F_NR,
-			.label	= "GPF",
-		},
-	}, {
-		.base	= S3C64XX_GPI_BASE,
-		.config	= &gpio_2bit_cfg_noint,
-		.chip	= {
-			.base	= S3C64XX_GPI(0),
-			.ngpio	= S3C64XX_GPIO_I_NR,
-			.label	= "GPI",
-		},
-	}, {
-		.base	= S3C64XX_GPJ_BASE,
-		.config	= &gpio_2bit_cfg_noint,
-		.chip	= {
-			.base	= S3C64XX_GPJ(0),
-			.ngpio	= S3C64XX_GPIO_J_NR,
-			.label	= "GPJ",
-		},
-	}, {
-		.base	= S3C64XX_GPN_BASE,
-		.irq_base = IRQ_EINT(0),
-		.config	= &gpio_2bit_cfg_eint10,
-		.chip	= {
-			.base	= S3C64XX_GPN(0),
-			.ngpio	= S3C64XX_GPIO_N_NR,
-			.label	= "GPN",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= S3C64XX_GPO_BASE,
-		.config	= &gpio_2bit_cfg_eint11,
-		.chip	= {
-			.base	= S3C64XX_GPO(0),
-			.ngpio	= S3C64XX_GPIO_O_NR,
-			.label	= "GPO",
-		},
-	}, {
-		.base	= S3C64XX_GPP_BASE,
-		.config	= &gpio_2bit_cfg_eint11,
-		.chip	= {
-			.base	= S3C64XX_GPP(0),
-			.ngpio	= S3C64XX_GPIO_P_NR,
-			.label	= "GPP",
-		},
-	}, {
-		.base	= S3C64XX_GPQ_BASE,
-		.config	= &gpio_2bit_cfg_eint11,
-		.chip	= {
-			.base	= S3C64XX_GPQ(0),
-			.ngpio	= S3C64XX_GPIO_Q_NR,
-			.label	= "GPQ",
-		},
-	},
-};
-
-static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip)
-{
-	chip->pm = __gpio_pm(&s3c_gpio_pm_2bit);
-}
-
-static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips,
-				       int nr_chips,
-				       void (*fn)(struct s3c_gpio_chip *))
-{
-	for (; nr_chips > 0; nr_chips--, chips++) {
-		if (fn)
-			(fn)(chips);
-		s3c_gpiolib_add(chips);
-	}
-}
-
-static __init int s3c64xx_gpiolib_init(void)
-{
-	s3c64xx_gpiolib_add(gpio_4bit, ARRAY_SIZE(gpio_4bit),
-			    samsung_gpiolib_add_4bit);
-
-	s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2),
-			    samsung_gpiolib_add_4bit2);
-
-	s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit),
-			    s3c64xx_gpiolib_add_2bit);
-
-	return 0;
-}
-
-core_initcall(s3c64xx_gpiolib_init);
-- 
cgit v1.2.3-18-g5258


From c4b3fd38dfb677d7a3997527c9cbdc21b81424a3 Mon Sep 17 00:00:00 2001
From: Kukjin Kim <kgene.kim@samsung.com>
Date: Fri, 26 Aug 2011 11:07:26 +0900
Subject: gpio/s5p64x0: move gpio driver into drivers/gpio/

Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s5p64x0/Makefile  |   2 +-
 arch/arm/mach-s5p64x0/gpiolib.c | 511 ----------------------------------------
 2 files changed, 1 insertion(+), 512 deletions(-)
 delete mode 100644 arch/arm/mach-s5p64x0/gpiolib.c

(limited to 'arch')

diff --git a/arch/arm/mach-s5p64x0/Makefile b/arch/arm/mach-s5p64x0/Makefile
index 5f6afdf067e..5b949553883 100644
--- a/arch/arm/mach-s5p64x0/Makefile
+++ b/arch/arm/mach-s5p64x0/Makefile
@@ -12,7 +12,7 @@ obj-				:=
 
 # Core support for S5P64X0 system
 
-obj-$(CONFIG_ARCH_S5P64X0)	+= cpu.o init.o clock.o dma.o gpiolib.o
+obj-$(CONFIG_ARCH_S5P64X0)	+= cpu.o init.o clock.o dma.o
 obj-$(CONFIG_ARCH_S5P64X0)	+= setup-i2c0.o irq-eint.o
 obj-$(CONFIG_CPU_S5P6440)	+= clock-s5p6440.o
 obj-$(CONFIG_CPU_S5P6450)	+= clock-s5p6450.o
diff --git a/arch/arm/mach-s5p64x0/gpiolib.c b/arch/arm/mach-s5p64x0/gpiolib.c
deleted file mode 100644
index e7fb3b004e7..00000000000
--- a/arch/arm/mach-s5p64x0/gpiolib.c
+++ /dev/null
@@ -1,511 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/gpiolib.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5P64X0 - GPIOlib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-clock.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-/*
- * S5P6440 GPIO bank summary:
- *
- * Bank	GPIOs	Style	SlpCon	ExtInt Group
- * A	6	4Bit	Yes	1
- * B	7	4Bit	Yes	1
- * C	8	4Bit	Yes	2
- * F	2	2Bit	Yes	4 [1]
- * G	7	4Bit	Yes	5
- * H	10	4Bit[2]	Yes	6
- * I	16	2Bit	Yes	None
- * J	12	2Bit	Yes	None
- * N	16	2Bit	No	IRQ_EINT
- * P	8	2Bit	Yes	8
- * R	15	4Bit[2]	Yes	8
- *
- * S5P6450 GPIO bank summary:
- *
- * Bank	GPIOs	Style	SlpCon	ExtInt Group
- * A	6	4Bit	Yes	1
- * B	7	4Bit	Yes	1
- * C	8	4Bit	Yes	2
- * D	8	4Bit	Yes	None
- * F	2	2Bit	Yes	None
- * G	14	4Bit[2]	Yes	5
- * H	10	4Bit[2]	Yes	6
- * I	16	2Bit	Yes	None
- * J	12	2Bit	Yes	None
- * K	5	4Bit	Yes	None
- * N	16	2Bit	No	IRQ_EINT
- * P	11	2Bit	Yes	8
- * Q	14	2Bit	Yes	None
- * R	15	4Bit[2]	Yes	None
- * S	8	2Bit	Yes	None
- *
- * [1] BANKF pins 14,15 do not form part of the external interrupt sources
- * [2] BANK has two control registers, GPxCON0 and GPxCON1
- */
-
-static int s5p64x0_gpiolib_rbank_4bit2_input(struct gpio_chip *chip,
-					     unsigned int offset)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	void __iomem *regcon = base;
-	unsigned long con;
-	unsigned long flags;
-
-	switch (offset) {
-	case 6:
-		offset += 1;
-	case 0:
-	case 1:
-	case 2:
-	case 3:
-	case 4:
-	case 5:
-		regcon -= 4;
-		break;
-	default:
-		offset -= 7;
-		break;
-	}
-
-	s3c_gpio_lock(ourchip, flags);
-
-	con = __raw_readl(regcon);
-	con &= ~(0xf << con_4bit_shift(offset));
-	__raw_writel(con, regcon);
-
-	s3c_gpio_unlock(ourchip, flags);
-
-	return 0;
-}
-
-static int s5p64x0_gpiolib_rbank_4bit2_output(struct gpio_chip *chip,
-					      unsigned int offset, int value)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	void __iomem *regcon = base;
-	unsigned long con;
-	unsigned long dat;
-	unsigned long flags;
-	unsigned con_offset  = offset;
-
-	switch (con_offset) {
-	case 6:
-		con_offset += 1;
-	case 0:
-	case 1:
-	case 2:
-	case 3:
-	case 4:
-	case 5:
-		regcon -= 4;
-		break;
-	default:
-		con_offset -= 7;
-		break;
-	}
-
-	s3c_gpio_lock(ourchip, flags);
-
-	con = __raw_readl(regcon);
-	con &= ~(0xf << con_4bit_shift(con_offset));
-	con |= 0x1 << con_4bit_shift(con_offset);
-
-	dat = __raw_readl(base + GPIODAT_OFF);
-	if (value)
-		dat |= 1 << offset;
-	else
-		dat &= ~(1 << offset);
-
-	__raw_writel(con, regcon);
-	__raw_writel(dat, base + GPIODAT_OFF);
-
-	s3c_gpio_unlock(ourchip, flags);
-
-	return 0;
-}
-
-int s5p64x0_gpio_setcfg_4bit_rbank(struct s3c_gpio_chip *chip,
-				   unsigned int off, unsigned int cfg)
-{
-	void __iomem *reg = chip->base;
-	unsigned int shift;
-	u32 con;
-
-	switch (off) {
-	case 0:
-	case 1:
-	case 2:
-	case 3:
-	case 4:
-	case 5:
-		shift = (off & 7) * 4;
-		reg -= 4;
-		break;
-	case 6:
-		shift = ((off + 1) & 7) * 4;
-		reg -= 4;
-	default:
-		shift = ((off + 1) & 7) * 4;
-		break;
-	}
-
-	if (s3c_gpio_is_cfg_special(cfg)) {
-		cfg &= 0xf;
-		cfg <<= shift;
-	}
-
-	con = __raw_readl(reg);
-	con &= ~(0xf << shift);
-	con |= cfg;
-	__raw_writel(con, reg);
-
-	return 0;
-}
-
-static struct s3c_gpio_cfg s5p64x0_gpio_cfgs[] = {
-	{
-		.cfg_eint	= 0,
-	}, {
-		.cfg_eint	= 7,
-	}, {
-		.cfg_eint	= 3,
-		.set_config	= s5p64x0_gpio_setcfg_4bit_rbank,
-	}, {
-		.cfg_eint	= 0,
-		.set_config	= s3c_gpio_setcfg_s3c24xx,
-		.get_config	= s3c_gpio_getcfg_s3c24xx,
-	}, {
-		.cfg_eint	= 2,
-		.set_config	= s3c_gpio_setcfg_s3c24xx,
-		.get_config	= s3c_gpio_getcfg_s3c24xx,
-	}, {
-		.cfg_eint	= 3,
-		.set_config	= s3c_gpio_setcfg_s3c24xx,
-		.get_config	= s3c_gpio_getcfg_s3c24xx,
-	},
-};
-
-static struct s3c_gpio_chip s5p6440_gpio_4bit[] = {
-	{
-		.base	= S5P64X0_GPA_BASE,
-		.config	= &s5p64x0_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6440_GPA(0),
-			.ngpio	= S5P6440_GPIO_A_NR,
-			.label	= "GPA",
-		},
-	}, {
-		.base	= S5P64X0_GPB_BASE,
-		.config	= &s5p64x0_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6440_GPB(0),
-			.ngpio	= S5P6440_GPIO_B_NR,
-			.label	= "GPB",
-		},
-	}, {
-		.base	= S5P64X0_GPC_BASE,
-		.config	= &s5p64x0_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6440_GPC(0),
-			.ngpio	= S5P6440_GPIO_C_NR,
-			.label	= "GPC",
-		},
-	}, {
-		.base	= S5P64X0_GPG_BASE,
-		.config	= &s5p64x0_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6440_GPG(0),
-			.ngpio	= S5P6440_GPIO_G_NR,
-			.label	= "GPG",
-		},
-	},
-};
-
-static struct s3c_gpio_chip s5p6440_gpio_4bit2[] = {
-	{
-		.base	= S5P64X0_GPH_BASE + 0x4,
-		.config	= &s5p64x0_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6440_GPH(0),
-			.ngpio	= S5P6440_GPIO_H_NR,
-			.label	= "GPH",
-		},
-	},
-};
-
-static struct s3c_gpio_chip s5p6440_gpio_rbank_4bit2[] = {
-	{
-		.base	= S5P64X0_GPR_BASE + 0x4,
-		.config	= &s5p64x0_gpio_cfgs[2],
-		.chip	= {
-			.base	= S5P6440_GPR(0),
-			.ngpio	= S5P6440_GPIO_R_NR,
-			.label	= "GPR",
-		},
-	},
-};
-
-static struct s3c_gpio_chip s5p6440_gpio_2bit[] = {
-	{
-		.base	= S5P64X0_GPF_BASE,
-		.config	= &s5p64x0_gpio_cfgs[5],
-		.chip	= {
-			.base	= S5P6440_GPF(0),
-			.ngpio	= S5P6440_GPIO_F_NR,
-			.label	= "GPF",
-		},
-	}, {
-		.base	= S5P64X0_GPI_BASE,
-		.config	= &s5p64x0_gpio_cfgs[3],
-		.chip	= {
-			.base	= S5P6440_GPI(0),
-			.ngpio	= S5P6440_GPIO_I_NR,
-			.label	= "GPI",
-		},
-	}, {
-		.base	= S5P64X0_GPJ_BASE,
-		.config	= &s5p64x0_gpio_cfgs[3],
-		.chip	= {
-			.base	= S5P6440_GPJ(0),
-			.ngpio	= S5P6440_GPIO_J_NR,
-			.label	= "GPJ",
-		},
-	}, {
-		.base	= S5P64X0_GPN_BASE,
-		.config	= &s5p64x0_gpio_cfgs[4],
-		.chip	= {
-			.base	= S5P6440_GPN(0),
-			.ngpio	= S5P6440_GPIO_N_NR,
-			.label	= "GPN",
-		},
-	}, {
-		.base	= S5P64X0_GPP_BASE,
-		.config	= &s5p64x0_gpio_cfgs[5],
-		.chip	= {
-			.base	= S5P6440_GPP(0),
-			.ngpio	= S5P6440_GPIO_P_NR,
-			.label	= "GPP",
-		},
-	},
-};
-
-static struct s3c_gpio_chip s5p6450_gpio_4bit[] = {
-	{
-		.base	= S5P64X0_GPA_BASE,
-		.config	= &s5p64x0_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6450_GPA(0),
-			.ngpio	= S5P6450_GPIO_A_NR,
-			.label	= "GPA",
-		},
-	}, {
-		.base	= S5P64X0_GPB_BASE,
-		.config	= &s5p64x0_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6450_GPB(0),
-			.ngpio	= S5P6450_GPIO_B_NR,
-			.label	= "GPB",
-		},
-	}, {
-		.base	= S5P64X0_GPC_BASE,
-		.config	= &s5p64x0_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6450_GPC(0),
-			.ngpio	= S5P6450_GPIO_C_NR,
-			.label	= "GPC",
-		},
-	}, {
-		.base	= S5P6450_GPD_BASE,
-		.config	= &s5p64x0_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6450_GPD(0),
-			.ngpio	= S5P6450_GPIO_D_NR,
-			.label	= "GPD",
-		},
-	}, {
-		.base	= S5P6450_GPK_BASE,
-		.config	= &s5p64x0_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6450_GPK(0),
-			.ngpio	= S5P6450_GPIO_K_NR,
-			.label	= "GPK",
-		},
-	},
-};
-
-static struct s3c_gpio_chip s5p6450_gpio_4bit2[] = {
-	{
-		.base	= S5P64X0_GPG_BASE + 0x4,
-		.config	= &s5p64x0_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6450_GPG(0),
-			.ngpio	= S5P6450_GPIO_G_NR,
-			.label	= "GPG",
-		},
-	}, {
-		.base	= S5P64X0_GPH_BASE + 0x4,
-		.config	= &s5p64x0_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6450_GPH(0),
-			.ngpio	= S5P6450_GPIO_H_NR,
-			.label	= "GPH",
-		},
-	},
-};
-
-static struct s3c_gpio_chip s5p6450_gpio_rbank_4bit2[] = {
-	{
-		.base	= S5P64X0_GPR_BASE + 0x4,
-		.config	= &s5p64x0_gpio_cfgs[2],
-		.chip	= {
-			.base	= S5P6450_GPR(0),
-			.ngpio	= S5P6450_GPIO_R_NR,
-			.label	= "GPR",
-		},
-	},
-};
-
-static struct s3c_gpio_chip s5p6450_gpio_2bit[] = {
-	{
-		.base	= S5P64X0_GPF_BASE,
-		.config	= &s5p64x0_gpio_cfgs[5],
-		.chip	= {
-			.base	= S5P6450_GPF(0),
-			.ngpio	= S5P6450_GPIO_F_NR,
-			.label	= "GPF",
-		},
-	}, {
-		.base	= S5P64X0_GPI_BASE,
-		.config	= &s5p64x0_gpio_cfgs[3],
-		.chip	= {
-			.base	= S5P6450_GPI(0),
-			.ngpio	= S5P6450_GPIO_I_NR,
-			.label	= "GPI",
-		},
-	}, {
-		.base	= S5P64X0_GPJ_BASE,
-		.config	= &s5p64x0_gpio_cfgs[3],
-		.chip	= {
-			.base	= S5P6450_GPJ(0),
-			.ngpio	= S5P6450_GPIO_J_NR,
-			.label	= "GPJ",
-		},
-	}, {
-		.base	= S5P64X0_GPN_BASE,
-		.config	= &s5p64x0_gpio_cfgs[4],
-		.chip	= {
-			.base	= S5P6450_GPN(0),
-			.ngpio	= S5P6450_GPIO_N_NR,
-			.label	= "GPN",
-		},
-	}, {
-		.base	= S5P64X0_GPP_BASE,
-		.config	= &s5p64x0_gpio_cfgs[5],
-		.chip	= {
-			.base	= S5P6450_GPP(0),
-			.ngpio	= S5P6450_GPIO_P_NR,
-			.label	= "GPP",
-		},
-	}, {
-		.base	= S5P6450_GPQ_BASE,
-		.config	= &s5p64x0_gpio_cfgs[4],
-		.chip	= {
-			.base	= S5P6450_GPQ(0),
-			.ngpio	= S5P6450_GPIO_Q_NR,
-			.label	= "GPQ",
-		},
-	}, {
-		.base	= S5P6450_GPS_BASE,
-		.config	= &s5p64x0_gpio_cfgs[5],
-		.chip	= {
-			.base	= S5P6450_GPS(0),
-			.ngpio	= S5P6450_GPIO_S_NR,
-			.label	= "GPS",
-		},
-	},
-};
-
-void __init s5p64x0_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips)
-{
-	for (; nr_chips > 0; nr_chips--, chipcfg++) {
-		if (!chipcfg->set_config)
-			chipcfg->set_config	= s3c_gpio_setcfg_s3c64xx_4bit;
-		if (!chipcfg->get_config)
-			chipcfg->get_config	= s3c_gpio_getcfg_s3c64xx_4bit;
-		if (!chipcfg->set_pull)
-			chipcfg->set_pull	= s3c_gpio_setpull_updown;
-		if (!chipcfg->get_pull)
-			chipcfg->get_pull	= s3c_gpio_getpull_updown;
-	}
-}
-
-static void __init s5p64x0_gpio_add_rbank_4bit2(struct s3c_gpio_chip *chip,
-						int nr_chips)
-{
-	for (; nr_chips > 0; nr_chips--, chip++) {
-		chip->chip.direction_input = s5p64x0_gpiolib_rbank_4bit2_input;
-		chip->chip.direction_output =
-					s5p64x0_gpiolib_rbank_4bit2_output;
-		s3c_gpiolib_add(chip);
-	}
-}
-
-static int __init s5p64x0_gpiolib_init(void)
-{
-	unsigned int chipid;
-
-	chipid = __raw_readl(S5P64X0_SYS_ID);
-
-	s5p64x0_gpiolib_set_cfg(s5p64x0_gpio_cfgs,
-				ARRAY_SIZE(s5p64x0_gpio_cfgs));
-
-	if ((chipid & 0xff000) == 0x50000) {
-		samsung_gpiolib_add_2bit_chips(s5p6450_gpio_2bit,
-					ARRAY_SIZE(s5p6450_gpio_2bit));
-
-		samsung_gpiolib_add_4bit_chips(s5p6450_gpio_4bit,
-					ARRAY_SIZE(s5p6450_gpio_4bit));
-
-		samsung_gpiolib_add_4bit2_chips(s5p6450_gpio_4bit2,
-					ARRAY_SIZE(s5p6450_gpio_4bit2));
-
-		s5p64x0_gpio_add_rbank_4bit2(s5p6450_gpio_rbank_4bit2,
-					ARRAY_SIZE(s5p6450_gpio_rbank_4bit2));
-	} else {
-		samsung_gpiolib_add_2bit_chips(s5p6440_gpio_2bit,
-					ARRAY_SIZE(s5p6440_gpio_2bit));
-
-		samsung_gpiolib_add_4bit_chips(s5p6440_gpio_4bit,
-					ARRAY_SIZE(s5p6440_gpio_4bit));
-
-		samsung_gpiolib_add_4bit2_chips(s5p6440_gpio_4bit2,
-					ARRAY_SIZE(s5p6440_gpio_4bit2));
-
-		s5p64x0_gpio_add_rbank_4bit2(s5p6440_gpio_rbank_4bit2,
-					ARRAY_SIZE(s5p6440_gpio_rbank_4bit2));
-	}
-
-	return 0;
-}
-core_initcall(s5p64x0_gpiolib_init);
-- 
cgit v1.2.3-18-g5258


From 1b39d5f2cc5c28085bbf48db80bf704ab4dedda9 Mon Sep 17 00:00:00 2001
From: Kukjin Kim <kgene.kim@samsung.com>
Date: Tue, 30 Aug 2011 20:39:08 +0900
Subject: gpio/samsung: gpio-samsung.c to support Samsung GPIOs

This patch adds support for Samsung GPIOs with one gpio driver
and removes old GPIO drivers which are drivers/gpio-s3c24xx.c,
gpio-s3c64xx.c, gpio-s5p64x0.c, gpio-s5pc100.c, gpio-s5pv210.c,
gpio-exynos4.c, gpio-plat-samsung.c, plat-samsung/gpio-config.c
and gpio.c to support each Samsung SoCs before. Because the
gpio-samsung.c can replace old Samsung GPIO drivers.
Basically, the gpio-samsung.c has been made by their merging
and removing duplicated definitions.

Note: gpio-samsung.c includes some SoC dependent codes and it
will be replaced next time.

Cc: Ben Dooks <ben-linux@fluff.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
[kgene.kim@samsung.com: squash the removing and adding patches]
[kgene.kim@samsung.com: fixes bug during to register of gpio_chips]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/plat-samsung/Makefile      |   2 -
 arch/arm/plat-samsung/gpio-config.c | 431 ------------------------------------
 arch/arm/plat-samsung/gpio.c        | 167 --------------
 3 files changed, 600 deletions(-)
 delete mode 100644 arch/arm/plat-samsung/gpio-config.c
 delete mode 100644 arch/arm/plat-samsung/gpio.c

(limited to 'arch')

diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 853764ba8cc..6d772d7c012 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -15,8 +15,6 @@ obj-y				+= init.o
 obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET)   += time.o
 obj-y				+= clock.o
 obj-y				+= pwm-clock.o
-obj-y				+= gpio.o
-obj-y				+= gpio-config.o
 obj-y				+= dev-asocdma.o
 
 obj-$(CONFIG_SAMSUNG_CLKSRC)	+= clock-clksrc.o
diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c
deleted file mode 100644
index 1c0b0401594..00000000000
--- a/arch/arm/plat-samsung/gpio-config.c
+++ /dev/null
@@ -1,431 +0,0 @@
-/* linux/arch/arm/plat-s3c/gpio-config.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008-2010 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C series GPIO configuration core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-int s3c_gpio_cfgpin(unsigned int pin, unsigned int config)
-{
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
-	unsigned long flags;
-	int offset;
-	int ret;
-
-	if (!chip)
-		return -EINVAL;
-
-	offset = pin - chip->chip.base;
-
-	s3c_gpio_lock(chip, flags);
-	ret = s3c_gpio_do_setcfg(chip, offset, config);
-	s3c_gpio_unlock(chip, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c_gpio_cfgpin);
-
-int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
-			  unsigned int cfg)
-{
-	int ret;
-
-	for (; nr > 0; nr--, start++) {
-		ret = s3c_gpio_cfgpin(start, cfg);
-		if (ret != 0)
-			return ret;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(s3c_gpio_cfgpin_range);
-
-int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
-			  unsigned int cfg, s3c_gpio_pull_t pull)
-{
-	int ret;
-
-	for (; nr > 0; nr--, start++) {
-		s3c_gpio_setpull(start, pull);
-		ret = s3c_gpio_cfgpin(start, cfg);
-		if (ret != 0)
-			return ret;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(s3c_gpio_cfgall_range);
-
-unsigned s3c_gpio_getcfg(unsigned int pin)
-{
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
-	unsigned long flags;
-	unsigned ret = 0;
-	int offset;
-
-	if (chip) {
-		offset = pin - chip->chip.base;
-
-		s3c_gpio_lock(chip, flags);
-		ret = s3c_gpio_do_getcfg(chip, offset);
-		s3c_gpio_unlock(chip, flags);
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c_gpio_getcfg);
-
-
-int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull)
-{
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
-	unsigned long flags;
-	int offset, ret;
-
-	if (!chip)
-		return -EINVAL;
-
-	offset = pin - chip->chip.base;
-
-	s3c_gpio_lock(chip, flags);
-	ret = s3c_gpio_do_setpull(chip, offset, pull);
-	s3c_gpio_unlock(chip, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c_gpio_setpull);
-
-s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin)
-{
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
-	unsigned long flags;
-	int offset;
-	u32 pup = 0;
-
-	if (chip) {
-		offset = pin - chip->chip.base;
-
-		s3c_gpio_lock(chip, flags);
-		pup = s3c_gpio_do_getpull(chip, offset);
-		s3c_gpio_unlock(chip, flags);
-	}
-
-	return (__force s3c_gpio_pull_t)pup;
-}
-EXPORT_SYMBOL(s3c_gpio_getpull);
-
-#ifdef CONFIG_S3C_GPIO_CFG_S3C24XX
-int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
-			      unsigned int off, unsigned int cfg)
-{
-	void __iomem *reg = chip->base;
-	unsigned int shift = off;
-	u32 con;
-
-	if (s3c_gpio_is_cfg_special(cfg)) {
-		cfg &= 0xf;
-
-		/* Map output to 0, and SFN2 to 1 */
-		cfg -= 1;
-		if (cfg > 1)
-			return -EINVAL;
-
-		cfg <<= shift;
-	}
-
-	con = __raw_readl(reg);
-	con &= ~(0x1 << shift);
-	con |= cfg;
-	__raw_writel(con, reg);
-
-	return 0;
-}
-
-unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
-				   unsigned int off)
-{
-	u32 con;
-
-	con = __raw_readl(chip->base);
-	con >>= off;
-	con &= 1;
-	con++;
-
-	return S3C_GPIO_SFN(con);
-}
-
-int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip,
-			    unsigned int off, unsigned int cfg)
-{
-	void __iomem *reg = chip->base;
-	unsigned int shift = off * 2;
-	u32 con;
-
-	if (s3c_gpio_is_cfg_special(cfg)) {
-		cfg &= 0xf;
-		if (cfg > 3)
-			return -EINVAL;
-
-		cfg <<= shift;
-	}
-
-	con = __raw_readl(reg);
-	con &= ~(0x3 << shift);
-	con |= cfg;
-	__raw_writel(con, reg);
-
-	return 0;
-}
-
-unsigned int s3c_gpio_getcfg_s3c24xx(struct s3c_gpio_chip *chip,
-				     unsigned int off)
-{
-	u32 con;
-
-	con = __raw_readl(chip->base);
-	con >>= off * 2;
-	con &= 3;
-
-	/* this conversion works for IN and OUT as well as special mode */
-	return S3C_GPIO_SPECIAL(con);
-}
-#endif
-
-#ifdef CONFIG_S3C_GPIO_CFG_S3C64XX
-int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
-				 unsigned int off, unsigned int cfg)
-{
-	void __iomem *reg = chip->base;
-	unsigned int shift = (off & 7) * 4;
-	u32 con;
-
-	if (off < 8 && chip->chip.ngpio > 8)
-		reg -= 4;
-
-	if (s3c_gpio_is_cfg_special(cfg)) {
-		cfg &= 0xf;
-		cfg <<= shift;
-	}
-
-	con = __raw_readl(reg);
-	con &= ~(0xf << shift);
-	con |= cfg;
-	__raw_writel(con, reg);
-
-	return 0;
-}
-
-unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
-				      unsigned int off)
-{
-	void __iomem *reg = chip->base;
-	unsigned int shift = (off & 7) * 4;
-	u32 con;
-
-	if (off < 8 && chip->chip.ngpio > 8)
-		reg -= 4;
-
-	con = __raw_readl(reg);
-	con >>= shift;
-	con &= 0xf;
-
-	/* this conversion works for IN and OUT as well as special mode */
-	return S3C_GPIO_SPECIAL(con);
-}
-
-#endif /* CONFIG_S3C_GPIO_CFG_S3C64XX */
-
-#ifdef CONFIG_S3C_GPIO_PULL_UPDOWN
-int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip,
-			    unsigned int off, s3c_gpio_pull_t pull)
-{
-	void __iomem *reg = chip->base + 0x08;
-	int shift = off * 2;
-	u32 pup;
-
-	pup = __raw_readl(reg);
-	pup &= ~(3 << shift);
-	pup |= pull << shift;
-	__raw_writel(pup, reg);
-
-	return 0;
-}
-
-s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip,
-					unsigned int off)
-{
-	void __iomem *reg = chip->base + 0x08;
-	int shift = off * 2;
-	u32 pup = __raw_readl(reg);
-
-	pup >>= shift;
-	pup &= 0x3;
-	return (__force s3c_gpio_pull_t)pup;
-}
-
-#ifdef CONFIG_S3C_GPIO_PULL_S3C2443
-int s3c_gpio_setpull_s3c2443(struct s3c_gpio_chip *chip,
-				unsigned int off, s3c_gpio_pull_t pull)
-{
-	switch (pull) {
-	case S3C_GPIO_PULL_NONE:
-		pull = 0x01;
-		break;
-	case S3C_GPIO_PULL_UP:
-		pull = 0x00;
-		break;
-	case S3C_GPIO_PULL_DOWN:
-		pull = 0x02;
-		break;
-	}
-	return s3c_gpio_setpull_updown(chip, off, pull);
-}
-
-s3c_gpio_pull_t s3c_gpio_getpull_s3c2443(struct s3c_gpio_chip *chip,
-					unsigned int off)
-{
-	s3c_gpio_pull_t pull;
-
-	pull = s3c_gpio_getpull_updown(chip, off);
-
-	switch (pull) {
-	case 0x00:
-		pull = S3C_GPIO_PULL_UP;
-		break;
-	case 0x01:
-	case 0x03:
-		pull = S3C_GPIO_PULL_NONE;
-		break;
-	case 0x02:
-		pull = S3C_GPIO_PULL_DOWN;
-		break;
-	}
-
-	return pull;
-}
-#endif
-#endif
-
-#if defined(CONFIG_S3C_GPIO_PULL_UP) || defined(CONFIG_S3C_GPIO_PULL_DOWN)
-static int s3c_gpio_setpull_1(struct s3c_gpio_chip *chip,
-			 unsigned int off, s3c_gpio_pull_t pull,
-			 s3c_gpio_pull_t updown)
-{
-	void __iomem *reg = chip->base + 0x08;
-	u32 pup = __raw_readl(reg);
-
-	if (pull == updown)
-		pup &= ~(1 << off);
-	else if (pull == S3C_GPIO_PULL_NONE)
-		pup |= (1 << off);
-	else
-		return -EINVAL;
-
-	__raw_writel(pup, reg);
-	return 0;
-}
-
-static s3c_gpio_pull_t s3c_gpio_getpull_1(struct s3c_gpio_chip *chip,
-				     unsigned int off, s3c_gpio_pull_t updown)
-{
-	void __iomem *reg = chip->base + 0x08;
-	u32 pup = __raw_readl(reg);
-
-	pup &= (1 << off);
-	return pup ? S3C_GPIO_PULL_NONE : updown;
-}
-#endif /* CONFIG_S3C_GPIO_PULL_UP || CONFIG_S3C_GPIO_PULL_DOWN */
-
-#ifdef CONFIG_S3C_GPIO_PULL_UP
-s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
-				     unsigned int off)
-{
-	return s3c_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP);
-}
-
-int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
-			 unsigned int off, s3c_gpio_pull_t pull)
-{
-	return s3c_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP);
-}
-#endif /* CONFIG_S3C_GPIO_PULL_UP */
-
-#ifdef CONFIG_S3C_GPIO_PULL_DOWN
-s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip,
-				     unsigned int off)
-{
-	return s3c_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN);
-}
-
-int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip,
-			 unsigned int off, s3c_gpio_pull_t pull)
-{
-	return s3c_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN);
-}
-#endif /* CONFIG_S3C_GPIO_PULL_DOWN */
-
-#ifdef CONFIG_S5P_GPIO_DRVSTR
-s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
-{
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
-	unsigned int off;
-	void __iomem *reg;
-	int shift;
-	u32 drvstr;
-
-	if (!chip)
-		return -EINVAL;
-
-	off = pin - chip->chip.base;
-	shift = off * 2;
-	reg = chip->base + 0x0C;
-
-	drvstr = __raw_readl(reg);
-	drvstr = drvstr >> shift;
-	drvstr &= 0x3;
-
-	return (__force s5p_gpio_drvstr_t)drvstr;
-}
-EXPORT_SYMBOL(s5p_gpio_get_drvstr);
-
-int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr)
-{
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
-	unsigned int off;
-	void __iomem *reg;
-	int shift;
-	u32 tmp;
-
-	if (!chip)
-		return -EINVAL;
-
-	off = pin - chip->chip.base;
-	shift = off * 2;
-	reg = chip->base + 0x0C;
-
-	tmp = __raw_readl(reg);
-	tmp &= ~(0x3 << shift);
-	tmp |= drvstr << shift;
-
-	__raw_writel(tmp, reg);
-
-	return 0;
-}
-EXPORT_SYMBOL(s5p_gpio_set_drvstr);
-#endif	/* CONFIG_S5P_GPIO_DRVSTR */
diff --git a/arch/arm/plat-samsung/gpio.c b/arch/arm/plat-samsung/gpio.c
deleted file mode 100644
index 7743c4b8b2f..00000000000
--- a/arch/arm/plat-samsung/gpio.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/* linux/arch/arm/plat-s3c/gpio.c
- *
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C series GPIO core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/spinlock.h>
-
-#include <plat/gpio-core.h>
-
-#ifdef CONFIG_S3C_GPIO_TRACK
-struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
-
-static __init void s3c_gpiolib_track(struct s3c_gpio_chip *chip)
-{
-	unsigned int gpn;
-	int i;
-
-	gpn = chip->chip.base;
-	for (i = 0; i < chip->chip.ngpio; i++, gpn++) {
-		BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios));
-		s3c_gpios[gpn] = chip;
-	}
-}
-#endif /* CONFIG_S3C_GPIO_TRACK */
-
-/* Default routines for controlling GPIO, based on the original S3C24XX
- * GPIO functions which deal with the case where each gpio bank of the
- * chip is as following:
- *
- * base + 0x00: Control register, 2 bits per gpio
- *	        gpio n: 2 bits starting at (2*n)
- *		00 = input, 01 = output, others mean special-function
- * base + 0x04: Data register, 1 bit per gpio
- *		bit n: data bit n
-*/
-
-static int s3c_gpiolib_input(struct gpio_chip *chip, unsigned offset)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long flags;
-	unsigned long con;
-
-	s3c_gpio_lock(ourchip, flags);
-
-	con = __raw_readl(base + 0x00);
-	con &= ~(3 << (offset * 2));
-
-	__raw_writel(con, base + 0x00);
-
-	s3c_gpio_unlock(ourchip, flags);
-	return 0;
-}
-
-static int s3c_gpiolib_output(struct gpio_chip *chip,
-			      unsigned offset, int value)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long flags;
-	unsigned long dat;
-	unsigned long con;
-
-	s3c_gpio_lock(ourchip, flags);
-
-	dat = __raw_readl(base + 0x04);
-	dat &= ~(1 << offset);
-	if (value)
-		dat |= 1 << offset;
-	__raw_writel(dat, base + 0x04);
-
-	con = __raw_readl(base + 0x00);
-	con &= ~(3 << (offset * 2));
-	con |= 1 << (offset * 2);
-
-	__raw_writel(con, base + 0x00);
-	__raw_writel(dat, base + 0x04);
-
-	s3c_gpio_unlock(ourchip, flags);
-	return 0;
-}
-
-static void s3c_gpiolib_set(struct gpio_chip *chip,
-			    unsigned offset, int value)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long flags;
-	unsigned long dat;
-
-	s3c_gpio_lock(ourchip, flags);
-
-	dat = __raw_readl(base + 0x04);
-	dat &= ~(1 << offset);
-	if (value)
-		dat |= 1 << offset;
-	__raw_writel(dat, base + 0x04);
-
-	s3c_gpio_unlock(ourchip, flags);
-}
-
-static int s3c_gpiolib_get(struct gpio_chip *chip, unsigned offset)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	unsigned long val;
-
-	val = __raw_readl(ourchip->base + 0x04);
-	val >>= offset;
-	val &= 1;
-
-	return val;
-}
-
-__init void s3c_gpiolib_add(struct s3c_gpio_chip *chip)
-{
-	struct gpio_chip *gc = &chip->chip;
-	int ret;
-
-	BUG_ON(!chip->base);
-	BUG_ON(!gc->label);
-	BUG_ON(!gc->ngpio);
-
-	spin_lock_init(&chip->lock);
-
-	if (!gc->direction_input)
-		gc->direction_input = s3c_gpiolib_input;
-	if (!gc->direction_output)
-		gc->direction_output = s3c_gpiolib_output;
-	if (!gc->set)
-		gc->set = s3c_gpiolib_set;
-	if (!gc->get)
-		gc->get = s3c_gpiolib_get;
-
-#ifdef CONFIG_PM
-	if (chip->pm != NULL) {
-		if (!chip->pm->save || !chip->pm->resume)
-			printk(KERN_ERR "gpio: %s has missing PM functions\n",
-			       gc->label);
-	} else
-		printk(KERN_ERR "gpio: %s has no PM function\n", gc->label);
-#endif
-
-	/* gpiochip_add() prints own failure message on error. */
-	ret = gpiochip_add(gc);
-	if (ret >= 0)
-		s3c_gpiolib_track(chip);
-}
-
-int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
-{
-	struct s3c_gpio_chip *s3c_chip = container_of(chip,
-			struct s3c_gpio_chip, chip);
-
-	return s3c_chip->irq_base + offset;
-}
-- 
cgit v1.2.3-18-g5258


From 782d8a3c0bdf23ec24fc8facb5af8510b2cf6de1 Mon Sep 17 00:00:00 2001
From: Kukjin Kim <kgene.kim@samsung.com>
Date: Tue, 30 Aug 2011 20:47:32 +0900
Subject: ARM: SAMSUNG: Update the name of regarding Samsung GPIO

According to gpio-samsung.c, this patch updates the name of
regarding Samsung GPIO. Basically the samsung_xxx prefix is
used in gpio-samsung.c instead of s3c_xxx, because unified
name can reduce its complexity.

Note: some s3c_xxx stil remains because it is used widely.
It will be updated next time.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/include/mach/pm-core.h       |   2 +-
 arch/arm/mach-s3c2410/include/mach/gpio-fns.h      |  99 +-----------
 arch/arm/mach-s3c2410/include/mach/gpio-track.h    |   6 +-
 arch/arm/mach-s3c2410/include/mach/pm-core.h       |   2 +-
 arch/arm/mach-s3c2410/s3c2410.c                    |   4 +-
 arch/arm/mach-s3c2412/gpio.c                       |   2 +-
 arch/arm/mach-s3c2416/s3c2416.c                    |   4 +-
 arch/arm/mach-s3c2440/s3c2440.c                    |   4 +-
 arch/arm/mach-s3c2440/s3c2442.c                    |   4 +-
 arch/arm/mach-s3c2443/s3c2443.c                    |   4 +-
 arch/arm/mach-s3c64xx/include/mach/pm-core.h       |   2 +-
 arch/arm/mach-s5pv210/include/mach/pm-core.h       |   2 +-
 arch/arm/plat-s5p/irq-gpioint.c                    |  10 +-
 .../plat-samsung/include/plat/gpio-cfg-helpers.h   | 172 +++++----------------
 arch/arm/plat-samsung/include/plat/gpio-cfg.h      |  34 ++--
 arch/arm/plat-samsung/include/plat/gpio-core.h     |  97 +++---------
 arch/arm/plat-samsung/include/plat/gpio-fns.h      |  98 ++++++++++++
 arch/arm/plat-samsung/include/plat/pm.h            |  10 +-
 arch/arm/plat-samsung/pm-gpio.c                    |  72 ++++-----
 arch/arm/plat-samsung/pm.c                         |   6 +-
 20 files changed, 250 insertions(+), 384 deletions(-)
 create mode 100644 arch/arm/plat-samsung/include/plat/gpio-fns.h

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/include/mach/pm-core.h b/arch/arm/mach-exynos4/include/mach/pm-core.h
index 1df3b81f96e..3499ec73720 100644
--- a/arch/arm/mach-exynos4/include/mach/pm-core.h
+++ b/arch/arm/mach-exynos4/include/mach/pm-core.h
@@ -53,7 +53,7 @@ static inline void s3c_pm_restored_gpios(void)
 	/* nothing here yet */
 }
 
-static inline void s3c_pm_saved_gpios(void)
+static inline void samsung_pm_saved_gpios(void)
 {
 	/* nothing here yet */
 }
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
index bab13920176..c53ad34c657 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
@@ -1,98 +1 @@
-/* arch/arm/mach-s3c2410/include/mach/gpio-fns.h
- *
- * Copyright (c) 2003-2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - hardware
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __MACH_GPIO_FNS_H
-#define __MACH_GPIO_FNS_H __FILE__
-
-/* These functions are in the to-be-removed category and it is strongly
- * encouraged not to use these in new code. They will be marked deprecated
- * very soon.
- *
- * Most of the functionality can be either replaced by the gpiocfg calls
- * for the s3c platform or by the generic GPIOlib API.
- *
- * As of 2.6.35-rc, these will be removed, with the few drivers using them
- * either replaced or given a wrapper until the calls can be removed.
-*/
-
-#include <plat/gpio-cfg.h>
-
-static inline void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int cfg)
-{
-	/* 1:1 mapping between cfgpin and setcfg calls at the moment */
-	s3c_gpio_cfgpin(pin, cfg);
-}
-
-/* external functions for GPIO support
- *
- * These allow various different clients to access the same GPIO
- * registers without conflicting. If your driver only owns the entire
- * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
-*/
-
-extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
-
-/* s3c2410_gpio_getirq
- *
- * turn the given pin number into the corresponding IRQ number
- *
- * returns:
- *	< 0 = no interrupt for this pin
- *	>=0 = interrupt number for the pin
-*/
-
-extern int s3c2410_gpio_getirq(unsigned int pin);
-
-/* s3c2410_gpio_irqfilter
- *
- * set the irq filtering on the given pin
- *
- * on = 0 => disable filtering
- *      1 => enable filtering
- *
- * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
- *          width of filter (0 through 63)
- *
- *
-*/
-
-extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
-				  unsigned int config);
-
-/* s3c2410_gpio_pullup
- *
- * This call should be replaced with s3c_gpio_setpull().
- *
- * As a note, there is currently no distinction between pull-up and pull-down
- * in the s3c24xx series devices with only an on/off configuration.
- */
-
-/* s3c2410_gpio_pullup
- *
- * configure the pull-up control on the given pin
- *
- * to = 1 => disable the pull-up
- *      0 => enable the pull-up
- *
- * eg;
- *
- *   s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
- *   s3c2410_gpio_pullup(S3C2410_GPE(8), 0);
-*/
-
-extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
-
-extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
-
-extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
-
-#endif /* __MACH_GPIO_FNS_H */
+#include <plat/gpio-fns.h>
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-track.h b/arch/arm/mach-s3c2410/include/mach/gpio-track.h
index d67819dde42..c410a078622 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-track.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-track.h
@@ -17,11 +17,11 @@
 
 #include <mach/regs-gpio.h>
 
-extern struct s3c_gpio_chip s3c24xx_gpios[];
+extern struct samsung_gpio_chip s3c24xx_gpios[];
 
-static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin)
+static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int pin)
 {
-	struct s3c_gpio_chip *chip;
+	struct samsung_gpio_chip *chip;
 
 	if (pin > S3C_GPIO_END)
 		return NULL;
diff --git a/arch/arm/mach-s3c2410/include/mach/pm-core.h b/arch/arm/mach-s3c2410/include/mach/pm-core.h
index 45eea5210c8..2eef7e6f767 100644
--- a/arch/arm/mach-s3c2410/include/mach/pm-core.h
+++ b/arch/arm/mach-s3c2410/include/mach/pm-core.h
@@ -64,4 +64,4 @@ static inline void s3c_pm_arch_update_uart(void __iomem *regs,
 }
 
 static inline void s3c_pm_restored_gpios(void) { }
-static inline void s3c_pm_saved_gpios(void) { }
+static inline void samsung_pm_saved_gpios(void) { }
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index f1d3bd8f6f1..a99c2f4a523 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -72,8 +72,8 @@ void __init s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 
 void __init s3c2410_map_io(void)
 {
-	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
-	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
+	s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
+	s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
 
 	iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc));
 }
diff --git a/arch/arm/mach-s3c2412/gpio.c b/arch/arm/mach-s3c2412/gpio.c
index 3404a876b33..4526f6ba31a 100644
--- a/arch/arm/mach-s3c2412/gpio.c
+++ b/arch/arm/mach-s3c2412/gpio.c
@@ -28,7 +28,7 @@
 
 int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state)
 {
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
 	unsigned long offs = pin - chip->chip.base;
 	unsigned long flags;
 	unsigned long slpcon;
diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c
index 494ce913dc9..3156b7a7137 100644
--- a/arch/arm/mach-s3c2416/s3c2416.c
+++ b/arch/arm/mach-s3c2416/s3c2416.c
@@ -118,8 +118,8 @@ void __init s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 
 void __init s3c2416_map_io(void)
 {
-	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_updown;
-	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_updown;
+	s3c24xx_gpiocfg_default.set_pull = samsung_gpio_setpull_updown;
+	s3c24xx_gpiocfg_default.get_pull = samsung_gpio_getpull_updown;
 
 	/* initialize device information early */
 	s3c2416_default_sdhci0();
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
index ce99ff72838..fc84e481efc 100644
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -68,6 +68,6 @@ void __init s3c2440_map_io(void)
 {
 	s3c244x_map_io();
 
-	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
-	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
+	s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
+	s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
 }
diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c2440/s3c2442.c
index 9ad99f8016a..48e273ce9f9 100644
--- a/arch/arm/mach-s3c2440/s3c2442.c
+++ b/arch/arm/mach-s3c2440/s3c2442.c
@@ -180,6 +180,6 @@ void __init s3c2442_map_io(void)
 {
 	s3c244x_map_io();
 
-	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1down;
-	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1down;
+	s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1down;
+	s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1down;
 }
diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c
index e6a28ba52c7..5df6458ddd4 100644
--- a/arch/arm/mach-s3c2443/s3c2443.c
+++ b/arch/arm/mach-s3c2443/s3c2443.c
@@ -90,8 +90,8 @@ void __init s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 
 void __init s3c2443_map_io(void)
 {
-	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_s3c2443;
-	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_s3c2443;
+	s3c24xx_gpiocfg_default.set_pull = s3c2443_gpio_setpull;
+	s3c24xx_gpiocfg_default.get_pull = s3c2443_gpio_getpull;
 
 	iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc));
 }
diff --git a/arch/arm/mach-s3c64xx/include/mach/pm-core.h b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
index 38659bebe4b..fcf3dcabb69 100644
--- a/arch/arm/mach-s3c64xx/include/mach/pm-core.h
+++ b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
@@ -104,7 +104,7 @@ static inline void s3c_pm_restored_gpios(void)
 	__raw_writel(0, S3C64XX_SLPEN);
 }
 
-static inline void s3c_pm_saved_gpios(void)
+static inline void samsung_pm_saved_gpios(void)
 {
 	/* turn on the sleep mode and keep it there, as it seems that during
 	 * suspend the xCON registers get re-set and thus you can end up with
diff --git a/arch/arm/mach-s5pv210/include/mach/pm-core.h b/arch/arm/mach-s5pv210/include/mach/pm-core.h
index 3e22109e1b7..eba8aea63ed 100644
--- a/arch/arm/mach-s5pv210/include/mach/pm-core.h
+++ b/arch/arm/mach-s5pv210/include/mach/pm-core.h
@@ -43,4 +43,4 @@ static inline void s3c_pm_arch_update_uart(void __iomem *regs,
 }
 
 static inline void s3c_pm_restored_gpios(void) { }
-static inline void s3c_pm_saved_gpios(void) { }
+static inline void samsung_pm_saved_gpios(void) { }
diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c
index f71078ef6bb..0455519aecd 100644
--- a/arch/arm/plat-s5p/irq-gpioint.c
+++ b/arch/arm/plat-s5p/irq-gpioint.c
@@ -37,7 +37,7 @@ struct s5p_gpioint_bank {
 	int			start;
 	int			nr_groups;
 	int			irq;
-	struct s3c_gpio_chip	**chips;
+	struct samsung_gpio_chip	**chips;
 	void			(*handler)(unsigned int, struct irq_desc *);
 };
 
@@ -87,7 +87,7 @@ static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc)
 	chained_irq_enter(chip, desc);
 
 	for (group = 0; group < bank->nr_groups; group++) {
-		struct s3c_gpio_chip *chip = bank->chips[group];
+		struct samsung_gpio_chip *chip = bank->chips[group];
 		if (!chip)
 			continue;
 
@@ -110,7 +110,7 @@ static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc)
 	chained_irq_exit(chip, desc);
 }
 
-static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip)
+static __init int s5p_gpioint_add(struct samsung_gpio_chip *chip)
 {
 	static int used_gpioint_groups = 0;
 	int group = chip->group;
@@ -130,7 +130,7 @@ static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip)
 		return -EINVAL;
 
 	if (!bank->handler) {
-		bank->chips = kzalloc(sizeof(struct s3c_gpio_chip *) *
+		bank->chips = kzalloc(sizeof(struct samsung_gpio_chip *) *
 				      bank->nr_groups, GFP_KERNEL);
 		if (!bank->chips)
 			return -ENOMEM;
@@ -173,7 +173,7 @@ static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip)
 
 int __init s5p_register_gpio_interrupt(int pin)
 {
-	struct s3c_gpio_chip *my_chip = s3c_gpiolib_getchip(pin);
+	struct samsung_gpio_chip *my_chip = samsung_gpiolib_getchip(pin);
 	int offset, group;
 	int ret;
 
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
index 9a4e53d5296..a181d7ce81c 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
@@ -1,11 +1,11 @@
-/* linux/arch/arm/plat-s3c/include/plat/gpio-cfg-helper.h
+/* linux/arch/arm/plat-samsung/include/plat/gpio-cfg-helper.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C Platform - GPIO pin configuration helper definitions
+ * Samsung Platform - GPIO pin configuration helper definitions
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -24,120 +24,30 @@
  * by disabling interrupts.
 */
 
-static inline int s3c_gpio_do_setcfg(struct s3c_gpio_chip *chip,
-				     unsigned int off, unsigned int config)
+static inline int samsung_gpio_do_setcfg(struct samsung_gpio_chip *chip,
+					 unsigned int off, unsigned int config)
 {
 	return (chip->config->set_config)(chip, off, config);
 }
 
-static inline unsigned s3c_gpio_do_getcfg(struct s3c_gpio_chip *chip,
-					  unsigned int off)
+static inline unsigned samsung_gpio_do_getcfg(struct samsung_gpio_chip *chip,
+					      unsigned int off)
 {
 	return (chip->config->get_config)(chip, off);
 }
 
-static inline int s3c_gpio_do_setpull(struct s3c_gpio_chip *chip,
-				      unsigned int off, s3c_gpio_pull_t pull)
+static inline int samsung_gpio_do_setpull(struct samsung_gpio_chip *chip,
+					  unsigned int off, samsung_gpio_pull_t pull)
 {
 	return (chip->config->set_pull)(chip, off, pull);
 }
 
-static inline s3c_gpio_pull_t s3c_gpio_do_getpull(struct s3c_gpio_chip *chip,
-						  unsigned int off)
+static inline samsung_gpio_pull_t samsung_gpio_do_getpull(struct samsung_gpio_chip *chip,
+							  unsigned int off)
 {
 	return chip->config->get_pull(chip, off);
 }
 
-/**
- * s3c_gpio_setcfg_s3c24xx - S3C24XX style GPIO configuration.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @cfg: The configuration value to set.
- *
- * This helper deal with the GPIO cases where the control register
- * has two bits of configuration per gpio, which have the following
- * functions:
- *	00 = input
- *	01 = output
- *	1x = special function
-*/
-extern int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip,
-				   unsigned int off, unsigned int cfg);
-
-/**
- * s3c_gpio_getcfg_s3c24xx - S3C24XX style GPIO configuration read.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- *
- * The reverse of s3c_gpio_setcfg_s3c24xx(). Will return a value whicg
- * could be directly passed back to s3c_gpio_setcfg_s3c24xx(), from the
- * S3C_GPIO_SPECIAL() macro.
- */
-unsigned int s3c_gpio_getcfg_s3c24xx(struct s3c_gpio_chip *chip,
-				     unsigned int off);
-
-/**
- * s3c_gpio_setcfg_s3c24xx_a - S3C24XX style GPIO configuration (Bank A)
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @cfg: The configuration value to set.
- *
- * This helper deal with the GPIO cases where the control register
- * has one bit of configuration for the gpio, where setting the bit
- * means the pin is in special function mode and unset means output.
-*/
-extern int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
-				     unsigned int off, unsigned int cfg);
-
-
-/**
- * s3c_gpio_getcfg_s3c24xx_a - S3C24XX style GPIO configuration read (Bank A)
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- *
- * The reverse of s3c_gpio_setcfg_s3c24xx_a() turning an GPIO into a usable
- * GPIO configuration value.
- *
- * @sa s3c_gpio_getcfg_s3c24xx
- * @sa s3c_gpio_getcfg_s3c64xx_4bit
- */
-extern unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
-					  unsigned int off);
-
-/**
- * s3c_gpio_setcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @cfg: The configuration value to set.
- *
- * This helper deal with the GPIO cases where the control register has 4 bits
- * of control per GPIO, generally in the form of:
- *	0000 = Input
- *	0001 = Output
- *	others = Special functions (dependent on bank)
- *
- * Note, since the code to deal with the case where there are two control
- * registers instead of one, we do not have a separate set of functions for
- * each case.
-*/
-extern int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
-					unsigned int off, unsigned int cfg);
-
-
-/**
- * s3c_gpio_getcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config read.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- *
- * The reverse of s3c_gpio_setcfg_s3c64xx_4bit(), turning a gpio configuration
- * register setting into a value the software can use, such as could be passed
- * to s3c_gpio_setcfg_s3c64xx_4bit().
- *
- * @sa s3c_gpio_getcfg_s3c24xx
- */
-extern unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
-					     unsigned int off);
-
 /* Pull-{up,down} resistor controls.
  *
  * S3C2410,S3C2440 = Pull-UP,
@@ -147,7 +57,7 @@ extern unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
  */
 
 /**
- * s3c_gpio_setpull_1up() - Pull configuration for choice of up or none.
+ * s3c24xx_gpio_setpull_1up() - Pull configuration for choice of up or none.
  * @chip: The gpio chip that is being configured.
  * @off: The offset for the GPIO being configured.
  * @param: pull: The pull mode being requested.
@@ -155,11 +65,11 @@ extern unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
  * This is a helper function for the case where we have GPIOs with one
  * bit configuring the presence of a pull-up resistor.
  */
-extern int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
-				unsigned int off, s3c_gpio_pull_t pull);
+extern int s3c24xx_gpio_setpull_1up(struct samsung_gpio_chip *chip,
+				    unsigned int off, samsung_gpio_pull_t pull);
 
 /**
- * s3c_gpio_setpull_1down() - Pull configuration for choice of down or none
+ * s3c24xx_gpio_setpull_1down() - Pull configuration for choice of down or none
  * @chip: The gpio chip that is being configured
  * @off: The offset for the GPIO being configured
  * @param: pull: The pull mode being requested
@@ -167,11 +77,13 @@ extern int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
  * This is a helper function for the case where we have GPIOs with one
  * bit configuring the presence of a pull-down resistor.
  */
-extern int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip,
-				  unsigned int off, s3c_gpio_pull_t pull);
+extern int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip,
+				      unsigned int off, samsung_gpio_pull_t pull);
 
 /**
- * s3c_gpio_setpull_upown() - Pull configuration for choice of up, down or none
+ * samsung_gpio_setpull_upown() - Pull configuration for choice of up,
+ * down or none
+ *
  * @chip: The gpio chip that is being configured.
  * @off: The offset for the GPIO being configured.
  * @param: pull: The pull mode being requested.
@@ -183,45 +95,46 @@ extern int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip,
  *	01 = Pull-up resistor connected
  *	10 = Pull-down resistor connected
  */
-extern int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip,
-				   unsigned int off, s3c_gpio_pull_t pull);
-
+extern int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
+				       unsigned int off, samsung_gpio_pull_t pull);
 
 /**
- * s3c_gpio_getpull_updown() - Get configuration for choice of up, down or none
+ * samsung_gpio_getpull_updown() - Get configuration for choice of up,
+ * down or none
+ *
  * @chip: The gpio chip that the GPIO pin belongs to
  * @off: The offset to the pin to get the configuration of.
  *
- * This helper function reads the state of the pull-{up,down} resistor for the
- * given GPIO in the same case as s3c_gpio_setpull_upown.
+ * This helper function reads the state of the pull-{up,down} resistor
+ * for the given GPIO in the same case as samsung_gpio_setpull_upown.
 */
-extern s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip,
-					       unsigned int off);
+extern samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip,
+						       unsigned int off);
 
 /**
- * s3c_gpio_getpull_1up() - Get configuration for choice of up or none
+ * s3c24xx_gpio_getpull_1up() - Get configuration for choice of up or none
  * @chip: The gpio chip that the GPIO pin belongs to
  * @off: The offset to the pin to get the configuration of.
  *
  * This helper function reads the state of the pull-up resistor for the
- * given GPIO in the same case as s3c_gpio_setpull_1up.
+ * given GPIO in the same case as s3c24xx_gpio_setpull_1up.
 */
-extern s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
-					    unsigned int off);
+extern samsung_gpio_pull_t s3c24xx_gpio_getpull_1up(struct samsung_gpio_chip *chip,
+						    unsigned int off);
 
 /**
- * s3c_gpio_getpull_1down() - Get configuration for choice of down or none
+ * s3c24xx_gpio_getpull_1down() - Get configuration for choice of down or none
  * @chip: The gpio chip that the GPIO pin belongs to
  * @off: The offset to the pin to get the configuration of.
  *
  * This helper function reads the state of the pull-down resistor for the
- * given GPIO in the same case as s3c_gpio_setpull_1down.
+ * given GPIO in the same case as s3c24xx_gpio_setpull_1down.
 */
-extern s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip,
-					    unsigned int off);
+extern samsung_gpio_pull_t s3c24xx_gpio_getpull_1down(struct samsung_gpio_chip *chip,
+						      unsigned int off);
 
 /**
- * s3c_gpio_setpull_s3c2443() - Pull configuration for s3c2443.
+ * s3c2443_gpio_setpull() - Pull configuration for s3c2443.
  * @chip: The gpio chip that is being configured.
  * @off: The offset for the GPIO being configured.
  * @param: pull: The pull mode being requested.
@@ -233,19 +146,18 @@ extern s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip,
  *	10 = Pull-down resistor connected
  *	x1 = No pull up resistor
  */
-extern int s3c_gpio_setpull_s3c2443(struct s3c_gpio_chip *chip,
-				    unsigned int off, s3c_gpio_pull_t pull);
+extern int s3c2443_gpio_setpull(struct samsung_gpio_chip *chip,
+				unsigned int off, samsung_gpio_pull_t pull);
 
 /**
- * s3c_gpio_getpull_s3c2443() - Get configuration for s3c2443 pull resistors
+ * s3c2443_gpio_getpull() - Get configuration for s3c2443 pull resistors
  * @chip: The gpio chip that the GPIO pin belongs to.
  * @off: The offset to the pin to get the configuration of.
  *
  * This helper function reads the state of the pull-{up,down} resistor for the
- * given GPIO in the same case as s3c_gpio_setpull_upown.
+ * given GPIO in the same case as samsung_gpio_setpull_upown.
 */
-extern s3c_gpio_pull_t s3c_gpio_getpull_s3c2443(struct s3c_gpio_chip *chip,
+extern samsung_gpio_pull_t s3c2443_gpio_getpull(struct samsung_gpio_chip *chip,
 						unsigned int off);
 
 #endif /* __PLAT_GPIO_CFG_HELPERS_H */
-
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
index 1762dcb4cb9..d48245bb02b 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
@@ -24,14 +24,14 @@
 #ifndef __PLAT_GPIO_CFG_H
 #define __PLAT_GPIO_CFG_H __FILE__
 
-typedef unsigned int __bitwise__ s3c_gpio_pull_t;
+typedef unsigned int __bitwise__ samsung_gpio_pull_t;
 typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
 
 /* forward declaration if gpio-core.h hasn't been included */
-struct s3c_gpio_chip;
+struct samsung_gpio_chip;
 
 /**
- * struct s3c_gpio_cfg GPIO configuration
+ * struct samsung_gpio_cfg GPIO configuration
  * @cfg_eint: Configuration setting when used for external interrupt source
  * @get_pull: Read the current pull configuration for the GPIO
  * @set_pull: Set the current pull configuraiton for the GPIO
@@ -44,20 +44,20 @@ struct s3c_gpio_chip;
  * per-bank configuration information that other systems such as the
  * external interrupt code will need.
  *
- * @sa s3c_gpio_cfgpin
+ * @sa samsung_gpio_cfgpin
  * @sa s3c_gpio_getcfg
  * @sa s3c_gpio_setpull
  * @sa s3c_gpio_getpull
  */
-struct s3c_gpio_cfg {
+struct samsung_gpio_cfg {
 	unsigned int	cfg_eint;
 
-	s3c_gpio_pull_t	(*get_pull)(struct s3c_gpio_chip *chip, unsigned offs);
-	int		(*set_pull)(struct s3c_gpio_chip *chip, unsigned offs,
-				    s3c_gpio_pull_t pull);
+	samsung_gpio_pull_t	(*get_pull)(struct samsung_gpio_chip *chip, unsigned offs);
+	int		(*set_pull)(struct samsung_gpio_chip *chip, unsigned offs,
+				    samsung_gpio_pull_t pull);
 
-	unsigned (*get_config)(struct s3c_gpio_chip *chip, unsigned offs);
-	int	 (*set_config)(struct s3c_gpio_chip *chip, unsigned offs,
+	unsigned (*get_config)(struct samsung_gpio_chip *chip, unsigned offs);
+	int	 (*set_config)(struct samsung_gpio_chip *chip, unsigned offs,
 			       unsigned config);
 };
 
@@ -69,7 +69,7 @@ struct s3c_gpio_cfg {
 #define S3C_GPIO_OUTPUT	(S3C_GPIO_SPECIAL(1))
 #define S3C_GPIO_SFN(x)	(S3C_GPIO_SPECIAL(x))
 
-#define s3c_gpio_is_cfg_special(_cfg) \
+#define samsung_gpio_is_cfg_special(_cfg) \
 	(((_cfg) & S3C_GPIO_SPECIAL_MARK) == S3C_GPIO_SPECIAL_MARK)
 
 /**
@@ -128,9 +128,9 @@ extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
  * up or down settings, and it may be dependent on the chip that is being
  * used to whether the particular mode is available.
  */
-#define S3C_GPIO_PULL_NONE	((__force s3c_gpio_pull_t)0x00)
-#define S3C_GPIO_PULL_DOWN	((__force s3c_gpio_pull_t)0x01)
-#define S3C_GPIO_PULL_UP	((__force s3c_gpio_pull_t)0x02)
+#define S3C_GPIO_PULL_NONE	((__force samsung_gpio_pull_t)0x00)
+#define S3C_GPIO_PULL_DOWN	((__force samsung_gpio_pull_t)0x01)
+#define S3C_GPIO_PULL_UP	((__force samsung_gpio_pull_t)0x02)
 
 /**
  * s3c_gpio_setpull() - set the state of a gpio pin pull resistor
@@ -143,7 +143,7 @@ extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
  *
  * @pull is one of S3C_GPIO_PULL_NONE, S3C_GPIO_PULL_DOWN or S3C_GPIO_PULL_UP.
 */
-extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull);
+extern int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull);
 
 /**
  * s3c_gpio_getpull() - get the pull resistor state of a gpio pin
@@ -151,7 +151,7 @@ extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull);
  *
  * Read the pull resistor value for the specified pin.
 */
-extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
+extern samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
 
 /* configure `all` aspects of an gpio */
 
@@ -170,7 +170,7 @@ extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
  * @sa s3c_gpio_cfgpin_range
  */
 extern int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
-				 unsigned int cfg, s3c_gpio_pull_t pull);
+				 unsigned int cfg, samsung_gpio_pull_t pull);
 
 static inline int s3c_gpio_cfgrange_nopull(unsigned int pin, unsigned int size,
 					   unsigned int cfg)
diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h
index 8cad4cf19c3..1fe6917f6a2 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-core.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-core.h
@@ -25,22 +25,22 @@
  * specific code.
 */
 
-struct s3c_gpio_chip;
+struct samsung_gpio_chip;
 
 /**
- * struct s3c_gpio_pm - power management (suspend/resume) information
+ * struct samsung_gpio_pm - power management (suspend/resume) information
  * @save: Routine to save the state of the GPIO block
  * @resume: Routine to resume the GPIO block.
  */
-struct s3c_gpio_pm {
-	void (*save)(struct s3c_gpio_chip *chip);
-	void (*resume)(struct s3c_gpio_chip *chip);
+struct samsung_gpio_pm {
+	void (*save)(struct samsung_gpio_chip *chip);
+	void (*resume)(struct samsung_gpio_chip *chip);
 };
 
-struct s3c_gpio_cfg;
+struct samsung_gpio_cfg;
 
 /**
- * struct s3c_gpio_chip - wrapper for specific implementation of gpio
+ * struct samsung_gpio_chip - wrapper for specific implementation of gpio
  * @chip: The chip structure to be exported via gpiolib.
  * @base: The base pointer to the gpio configuration registers.
  * @group: The group register number for gpio interrupt support.
@@ -60,10 +60,10 @@ struct s3c_gpio_cfg;
  * CPU cores trying to get one lock for different GPIO banks, where each
  * bank of GPIO has its own register space and configuration registers.
  */
-struct s3c_gpio_chip {
+struct samsung_gpio_chip {
 	struct gpio_chip	chip;
-	struct s3c_gpio_cfg	*config;
-	struct s3c_gpio_pm	*pm;
+	struct samsung_gpio_cfg	*config;
+	struct samsung_gpio_pm	*pm;
 	void __iomem		*base;
 	int			irq_base;
 	int			group;
@@ -73,58 +73,11 @@ struct s3c_gpio_chip {
 #endif
 };
 
-static inline struct s3c_gpio_chip *to_s3c_gpio(struct gpio_chip *gpc)
+static inline struct samsung_gpio_chip *to_samsung_gpio(struct gpio_chip *gpc)
 {
-	return container_of(gpc, struct s3c_gpio_chip, chip);
+	return container_of(gpc, struct samsung_gpio_chip, chip);
 }
 
-/** s3c_gpiolib_add() - add the s3c specific version of a gpio_chip.
- * @chip: The chip to register
- *
- * This is a wrapper to gpiochip_add() that takes our specific gpio chip
- * information and makes the necessary alterations for the platform and
- * notes the information for use with the configuration systems and any
- * other parts of the system.
- */
-extern void s3c_gpiolib_add(struct s3c_gpio_chip *chip);
-
-/* CONFIG_S3C_GPIO_TRACK enables the tracking of the s3c specific gpios
- * for use with the configuration calls, and other parts of the s3c gpiolib
- * support code.
- *
- * Not all s3c support code will need this, as some configurations of cpu
- * may only support one or two different configuration options and have an
- * easy gpio to s3c_gpio_chip mapping function. If this is the case, then
- * the machine support file should provide its own s3c_gpiolib_getchip()
- * and any other necessary functions.
- */
-
-/**
- * samsung_gpiolib_add_4bit_chips - 4bit single register GPIO config.
- * @chip: The gpio chip that is being configured.
- * @nr_chips: The no of chips (gpio ports) for the GPIO being configured.
- *
- * This helper deal with the GPIO cases where the control register has 4 bits
- * of control per GPIO, generally in the form of:
- * 0000 = Input
- * 0001 = Output
- * others = Special functions (dependent on bank)
- *
- * Note, since the code to deal with the case where there are two control
- * registers instead of one, we do not have a separate set of function
- * (samsung_gpiolib_add_4bit2_chips)for each case.
- */
-extern void samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip,
-					   int nr_chips);
-extern void samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip,
-					    int nr_chips);
-extern void samsung_gpiolib_add_2bit_chips(struct s3c_gpio_chip *chip,
-					   int nr_chips);
-
-extern void samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip);
-extern void samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip);
-
-
 /**
  * samsung_gpiolib_to_irq - convert gpio pin to irq number
  * @chip: The gpio chip that the pin belongs to.
@@ -136,36 +89,36 @@ extern void samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip);
 extern int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset);
 
 /* exported for core SoC support to change */
-extern struct s3c_gpio_cfg s3c24xx_gpiocfg_default;
+extern struct samsung_gpio_cfg s3c24xx_gpiocfg_default;
 
 #ifdef CONFIG_S3C_GPIO_TRACK
-extern struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
+extern struct samsung_gpio_chip *s3c_gpios[S3C_GPIO_END];
 
-static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int chip)
+static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int chip)
 {
 	return (chip < S3C_GPIO_END) ? s3c_gpios[chip] : NULL;
 }
 #else
-/* machine specific code should provide s3c_gpiolib_getchip */
+/* machine specific code should provide samsung_gpiolib_getchip */
 
 #include <mach/gpio-track.h>
 
-static inline void s3c_gpiolib_track(struct s3c_gpio_chip *chip) { }
+static inline void s3c_gpiolib_track(struct samsung_gpio_chip *chip) { }
 #endif
 
 #ifdef CONFIG_PM
-extern struct s3c_gpio_pm s3c_gpio_pm_1bit;
-extern struct s3c_gpio_pm s3c_gpio_pm_2bit;
-extern struct s3c_gpio_pm s3c_gpio_pm_4bit;
+extern struct samsung_gpio_pm samsung_gpio_pm_1bit;
+extern struct samsung_gpio_pm samsung_gpio_pm_2bit;
+extern struct samsung_gpio_pm samsung_gpio_pm_4bit;
 #define __gpio_pm(x) x
 #else
-#define s3c_gpio_pm_1bit NULL
-#define s3c_gpio_pm_2bit NULL
-#define s3c_gpio_pm_4bit NULL
+#define samsung_gpio_pm_1bit NULL
+#define samsung_gpio_pm_2bit NULL
+#define samsung_gpio_pm_4bit NULL
 #define __gpio_pm(x) NULL
 
 #endif /* CONFIG_PM */
 
 /* locking wrappers to deal with multiple access to the same gpio bank */
-#define s3c_gpio_lock(_oc, _fl) spin_lock_irqsave(&(_oc)->lock, _fl)
-#define s3c_gpio_unlock(_oc, _fl) spin_unlock_irqrestore(&(_oc)->lock, _fl)
+#define samsung_gpio_lock(_oc, _fl) spin_lock_irqsave(&(_oc)->lock, _fl)
+#define samsung_gpio_unlock(_oc, _fl) spin_unlock_irqrestore(&(_oc)->lock, _fl)
diff --git a/arch/arm/plat-samsung/include/plat/gpio-fns.h b/arch/arm/plat-samsung/include/plat/gpio-fns.h
new file mode 100644
index 00000000000..bab13920176
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/gpio-fns.h
@@ -0,0 +1,98 @@
+/* arch/arm/mach-s3c2410/include/mach/gpio-fns.h
+ *
+ * Copyright (c) 2003-2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - hardware
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __MACH_GPIO_FNS_H
+#define __MACH_GPIO_FNS_H __FILE__
+
+/* These functions are in the to-be-removed category and it is strongly
+ * encouraged not to use these in new code. They will be marked deprecated
+ * very soon.
+ *
+ * Most of the functionality can be either replaced by the gpiocfg calls
+ * for the s3c platform or by the generic GPIOlib API.
+ *
+ * As of 2.6.35-rc, these will be removed, with the few drivers using them
+ * either replaced or given a wrapper until the calls can be removed.
+*/
+
+#include <plat/gpio-cfg.h>
+
+static inline void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int cfg)
+{
+	/* 1:1 mapping between cfgpin and setcfg calls at the moment */
+	s3c_gpio_cfgpin(pin, cfg);
+}
+
+/* external functions for GPIO support
+ *
+ * These allow various different clients to access the same GPIO
+ * registers without conflicting. If your driver only owns the entire
+ * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
+*/
+
+extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
+
+/* s3c2410_gpio_getirq
+ *
+ * turn the given pin number into the corresponding IRQ number
+ *
+ * returns:
+ *	< 0 = no interrupt for this pin
+ *	>=0 = interrupt number for the pin
+*/
+
+extern int s3c2410_gpio_getirq(unsigned int pin);
+
+/* s3c2410_gpio_irqfilter
+ *
+ * set the irq filtering on the given pin
+ *
+ * on = 0 => disable filtering
+ *      1 => enable filtering
+ *
+ * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
+ *          width of filter (0 through 63)
+ *
+ *
+*/
+
+extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
+				  unsigned int config);
+
+/* s3c2410_gpio_pullup
+ *
+ * This call should be replaced with s3c_gpio_setpull().
+ *
+ * As a note, there is currently no distinction between pull-up and pull-down
+ * in the s3c24xx series devices with only an on/off configuration.
+ */
+
+/* s3c2410_gpio_pullup
+ *
+ * configure the pull-up control on the given pin
+ *
+ * to = 1 => disable the pull-up
+ *      0 => enable the pull-up
+ *
+ * eg;
+ *
+ *   s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
+ *   s3c2410_gpio_pullup(S3C2410_GPE(8), 0);
+*/
+
+extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
+
+extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
+
+extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
+
+#endif /* __MACH_GPIO_FNS_H */
diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h
index f6749916d19..dcf68709f9c 100644
--- a/arch/arm/plat-samsung/include/plat/pm.h
+++ b/arch/arm/plat-samsung/include/plat/pm.h
@@ -165,20 +165,20 @@ extern void s3c_pm_check_store(void);
 extern void s3c_pm_configure_extint(void);
 
 /**
- * s3c_pm_restore_gpios() - restore the state of the gpios after sleep.
+ * samsung_pm_restore_gpios() - restore the state of the gpios after sleep.
  *
  * Restore the state of the GPIO pins after sleep, which may involve ensuring
  * that we do not glitch the state of the pins from that the bootloader's
  * resume code has done.
 */
-extern void s3c_pm_restore_gpios(void);
+extern void samsung_pm_restore_gpios(void);
 
 /**
- * s3c_pm_save_gpios() - save the state of the GPIOs for restoring after sleep.
+ * samsung_pm_save_gpios() - save the state of the GPIOs for restoring after sleep.
  *
- * Save the GPIO states for resotration on resume. See s3c_pm_restore_gpios().
+ * Save the GPIO states for resotration on resume. See samsung_pm_restore_gpios().
  */
-extern void s3c_pm_save_gpios(void);
+extern void samsung_pm_save_gpios(void);
 
 extern void s3c_pm_save_core(void);
 extern void s3c_pm_restore_core(void);
diff --git a/arch/arm/plat-samsung/pm-gpio.c b/arch/arm/plat-samsung/pm-gpio.c
index 96528200eb7..4be016eaa6d 100644
--- a/arch/arm/plat-samsung/pm-gpio.c
+++ b/arch/arm/plat-samsung/pm-gpio.c
@@ -28,13 +28,13 @@
 #define OFFS_DAT	(0x04)
 #define OFFS_UP		(0x08)
 
-static void s3c_gpio_pm_1bit_save(struct s3c_gpio_chip *chip)
+static void samsung_gpio_pm_1bit_save(struct samsung_gpio_chip *chip)
 {
 	chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
 	chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
 }
 
-static void s3c_gpio_pm_1bit_resume(struct s3c_gpio_chip *chip)
+static void samsung_gpio_pm_1bit_resume(struct samsung_gpio_chip *chip)
 {
 	void __iomem *base = chip->base;
 	u32 old_gpcon = __raw_readl(base + OFFS_CON);
@@ -60,12 +60,12 @@ static void s3c_gpio_pm_1bit_resume(struct s3c_gpio_chip *chip)
 		  chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
 }
 
-struct s3c_gpio_pm s3c_gpio_pm_1bit = {
-	.save	= s3c_gpio_pm_1bit_save,
-	.resume = s3c_gpio_pm_1bit_resume,
+struct samsung_gpio_pm samsung_gpio_pm_1bit = {
+	.save	= samsung_gpio_pm_1bit_save,
+	.resume = samsung_gpio_pm_1bit_resume,
 };
 
-static void s3c_gpio_pm_2bit_save(struct s3c_gpio_chip *chip)
+static void samsung_gpio_pm_2bit_save(struct samsung_gpio_chip *chip)
 {
 	chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
 	chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
@@ -95,7 +95,7 @@ static inline int is_out(unsigned long con)
 }
 
 /**
- * s3c_gpio_pm_2bit_resume() - restore the given GPIO bank
+ * samsung_gpio_pm_2bit_resume() - restore the given GPIO bank
  * @chip: The chip information to resume.
  *
  * Restore one of the GPIO banks that was saved during suspend. This is
@@ -121,7 +121,7 @@ static inline int is_out(unsigned long con)
  * [1] this assumes that writing to a pin DAT whilst in SFN will set the
  *     state for when it is next output.
  */
-static void s3c_gpio_pm_2bit_resume(struct s3c_gpio_chip *chip)
+static void samsung_gpio_pm_2bit_resume(struct samsung_gpio_chip *chip)
 {
 	void __iomem *base = chip->base;
 	u32 old_gpcon = __raw_readl(base + OFFS_CON);
@@ -187,13 +187,13 @@ static void s3c_gpio_pm_2bit_resume(struct s3c_gpio_chip *chip)
 		  chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
 }
 
-struct s3c_gpio_pm s3c_gpio_pm_2bit = {
-	.save	= s3c_gpio_pm_2bit_save,
-	.resume = s3c_gpio_pm_2bit_resume,
+struct samsung_gpio_pm samsung_gpio_pm_2bit = {
+	.save	= samsung_gpio_pm_2bit_save,
+	.resume = samsung_gpio_pm_2bit_resume,
 };
 
 #if defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_PLAT_S5P)
-static void s3c_gpio_pm_4bit_save(struct s3c_gpio_chip *chip)
+static void samsung_gpio_pm_4bit_save(struct samsung_gpio_chip *chip)
 {
 	chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON);
 	chip->pm_save[2] = __raw_readl(chip->base + OFFS_DAT);
@@ -203,7 +203,7 @@ static void s3c_gpio_pm_4bit_save(struct s3c_gpio_chip *chip)
 		chip->pm_save[0] = __raw_readl(chip->base - 4);
 }
 
-static u32 s3c_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon)
+static u32 samsung_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon)
 {
 	u32 old, new, mask;
 	u32 change_mask = 0x0;
@@ -242,14 +242,14 @@ static u32 s3c_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon)
 	return change_mask;
 }
 
-static void s3c_gpio_pm_4bit_con(struct s3c_gpio_chip *chip, int index)
+static void samsung_gpio_pm_4bit_con(struct samsung_gpio_chip *chip, int index)
 {
 	void __iomem *con = chip->base + (index * 4);
 	u32 old_gpcon = __raw_readl(con);
 	u32 gps_gpcon = chip->pm_save[index + 1];
 	u32 gpcon, mask;
 
-	mask = s3c_gpio_pm_4bit_mask(old_gpcon, gps_gpcon);
+	mask = samsung_gpio_pm_4bit_mask(old_gpcon, gps_gpcon);
 
 	gpcon = old_gpcon & ~mask;
 	gpcon |= gps_gpcon & mask;
@@ -257,7 +257,7 @@ static void s3c_gpio_pm_4bit_con(struct s3c_gpio_chip *chip, int index)
 	__raw_writel(gpcon, con);
 }
 
-static void s3c_gpio_pm_4bit_resume(struct s3c_gpio_chip *chip)
+static void samsung_gpio_pm_4bit_resume(struct samsung_gpio_chip *chip)
 {
 	void __iomem *base = chip->base;
 	u32 old_gpcon[2];
@@ -269,10 +269,10 @@ static void s3c_gpio_pm_4bit_resume(struct s3c_gpio_chip *chip)
 	old_gpcon[0] = 0;
 	old_gpcon[1] = __raw_readl(base + OFFS_CON);
 
-	s3c_gpio_pm_4bit_con(chip, 0);
+	samsung_gpio_pm_4bit_con(chip, 0);
 	if (chip->chip.ngpio > 8) {
 		old_gpcon[0] = __raw_readl(base - 4);
-		s3c_gpio_pm_4bit_con(chip, -1);
+		samsung_gpio_pm_4bit_con(chip, -1);
 	}
 
 	/* Now change the configurations that require DAT,CON */
@@ -298,19 +298,19 @@ static void s3c_gpio_pm_4bit_resume(struct s3c_gpio_chip *chip)
 			  old_gpdat, gps_gpdat);
 }
 
-struct s3c_gpio_pm s3c_gpio_pm_4bit = {
-	.save	= s3c_gpio_pm_4bit_save,
-	.resume = s3c_gpio_pm_4bit_resume,
+struct samsung_gpio_pm samsung_gpio_pm_4bit = {
+	.save	= samsung_gpio_pm_4bit_save,
+	.resume = samsung_gpio_pm_4bit_resume,
 };
 #endif /* CONFIG_ARCH_S3C64XX || CONFIG_PLAT_S5P */
 
 /**
- * s3c_pm_save_gpio() - save gpio chip data for suspend
+ * samsung_pm_save_gpio() - save gpio chip data for suspend
  * @ourchip: The chip for suspend.
  */
-static void s3c_pm_save_gpio(struct s3c_gpio_chip *ourchip)
+static void samsung_pm_save_gpio(struct samsung_gpio_chip *ourchip)
 {
-	struct s3c_gpio_pm *pm = ourchip->pm;
+	struct samsung_gpio_pm *pm = ourchip->pm;
 
 	if (pm == NULL || pm->save == NULL)
 		S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
@@ -319,24 +319,24 @@ static void s3c_pm_save_gpio(struct s3c_gpio_chip *ourchip)
 }
 
 /**
- * s3c_pm_save_gpios() - Save the state of the GPIO banks.
+ * samsung_pm_save_gpios() - Save the state of the GPIO banks.
  *
  * For all the GPIO banks, save the state of each one ready for going
  * into a suspend mode.
  */
-void s3c_pm_save_gpios(void)
+void samsung_pm_save_gpios(void)
 {
-	struct s3c_gpio_chip *ourchip;
+	struct samsung_gpio_chip *ourchip;
 	unsigned int gpio_nr;
 
 	for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) {
-		ourchip = s3c_gpiolib_getchip(gpio_nr);
+		ourchip = samsung_gpiolib_getchip(gpio_nr);
 		if (!ourchip) {
 			gpio_nr++;
 			continue;
 		}
 
-		s3c_pm_save_gpio(ourchip);
+		samsung_pm_save_gpio(ourchip);
 
 		S3C_PMDBG("%s: save %08x,%08x,%08x,%08x\n",
 			  ourchip->chip.label,
@@ -351,12 +351,12 @@ void s3c_pm_save_gpios(void)
 }
 
 /**
- * s3c_pm_resume_gpio() - restore gpio chip data after suspend
+ * samsung_pm_resume_gpio() - restore gpio chip data after suspend
  * @ourchip: The suspended chip.
  */
-static void s3c_pm_resume_gpio(struct s3c_gpio_chip *ourchip)
+static void samsung_pm_resume_gpio(struct samsung_gpio_chip *ourchip)
 {
-	struct s3c_gpio_pm *pm = ourchip->pm;
+	struct samsung_gpio_pm *pm = ourchip->pm;
 
 	if (pm == NULL || pm->resume == NULL)
 		S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
@@ -364,19 +364,19 @@ static void s3c_pm_resume_gpio(struct s3c_gpio_chip *ourchip)
 		pm->resume(ourchip);
 }
 
-void s3c_pm_restore_gpios(void)
+void samsung_pm_restore_gpios(void)
 {
-	struct s3c_gpio_chip *ourchip;
+	struct samsung_gpio_chip *ourchip;
 	unsigned int gpio_nr;
 
 	for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) {
-		ourchip = s3c_gpiolib_getchip(gpio_nr);
+		ourchip = samsung_gpiolib_getchip(gpio_nr);
 		if (!ourchip) {
 			gpio_nr++;
 			continue;
 		}
 
-		s3c_pm_resume_gpio(ourchip);
+		samsung_pm_resume_gpio(ourchip);
 
 		gpio_nr += ourchip->chip.ngpio;
 		gpio_nr += CONFIG_S3C_GPIO_SPACE;
diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c
index ae6f99834cd..64ab65f0fdb 100644
--- a/arch/arm/plat-samsung/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -268,8 +268,8 @@ static int s3c_pm_enter(suspend_state_t state)
 
 	/* save all necessary core registers not covered by the drivers */
 
-	s3c_pm_save_gpios();
-	s3c_pm_saved_gpios();
+	samsung_pm_save_gpios();
+	samsung_pm_saved_gpios();
 	s3c_pm_save_uarts();
 	s3c_pm_save_core();
 
@@ -306,7 +306,7 @@ static int s3c_pm_enter(suspend_state_t state)
 
 	s3c_pm_restore_core();
 	s3c_pm_restore_uarts();
-	s3c_pm_restore_gpios();
+	samsung_pm_restore_gpios();
 	s3c_pm_restored_gpios();
 
 	s3c_pm_debug_init();
-- 
cgit v1.2.3-18-g5258


From 5ec7414494ed1204c9e2ed0b8232b29860d0986f Mon Sep 17 00:00:00 2001
From: Kukjin Kim <kgene.kim@samsung.com>
Date: Tue, 30 Aug 2011 20:35:05 +0900
Subject: ARM: SAMSUNG: Remove useless Samsung GPIO related CONFIGs

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/Kconfig              |  3 ---
 arch/arm/mach-s3c2410/Kconfig |  1 -
 arch/arm/mach-s3c2416/Kconfig |  1 -
 arch/arm/mach-s3c2440/Kconfig |  2 --
 arch/arm/mach-s3c2443/Kconfig |  1 -
 arch/arm/plat-s3c24xx/Kconfig |  1 -
 arch/arm/plat-s5p/Kconfig     |  3 ---
 arch/arm/plat-samsung/Kconfig | 27 ---------------------------
 8 files changed, 39 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3269576dbfa..42401daa165 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -724,9 +724,6 @@ config ARCH_S3C64XX
 	select SAMSUNG_IRQ_VIC_TIMER
 	select SAMSUNG_IRQ_UART
 	select S3C_GPIO_TRACK
-	select S3C_GPIO_PULL_UPDOWN
-	select S3C_GPIO_CFG_S3C24XX
-	select S3C_GPIO_CFG_S3C64XX
 	select S3C_DEV_NAND
 	select USB_ARCH_HAS_OHCI
 	select SAMSUNG_GPIOLIB_4BIT
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 3700cf32af0..5261a7ed099 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -6,7 +6,6 @@ config CPU_S3C2410
 	bool
 	depends on ARCH_S3C2410
 	select CPU_ARM920T
-	select S3C_GPIO_PULL_UP
 	select S3C2410_CLOCK
 	select CPU_LLSERIAL_S3C2410
 	select S3C2410_PM if PM
diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig
index 69b48a7d1db..84c7b03e5a3 100644
--- a/arch/arm/mach-s3c2416/Kconfig
+++ b/arch/arm/mach-s3c2416/Kconfig
@@ -13,7 +13,6 @@ config CPU_S3C2416
 	select CPU_ARM926T
 	select S3C2416_DMA if S3C2410_DMA
 	select CPU_LLSERIAL_S3C2440
-	select S3C_GPIO_PULL_UPDOWN
 	select SAMSUNG_CLKSRC
 	select S3C2443_CLOCK
 	help
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index c461fb8e15c..914e620f125 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -5,7 +5,6 @@
 config CPU_S3C2440
 	bool
 	select CPU_ARM920T
-	select S3C_GPIO_PULL_UP
 	select S3C2410_CLOCK
 	select S3C2410_PM if PM
 	select S3C2440_DMA if S3C2410_DMA
@@ -17,7 +16,6 @@ config CPU_S3C2440
 config CPU_S3C2442
 	bool
 	select CPU_ARM920T
-	select S3C_GPIO_PULL_DOWN
 	select S3C2410_CLOCK
 	select S3C2410_PM if PM
 	select CPU_S3C244X
diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig
index d8eb86823df..8814031516c 100644
--- a/arch/arm/mach-s3c2443/Kconfig
+++ b/arch/arm/mach-s3c2443/Kconfig
@@ -10,7 +10,6 @@ config CPU_S3C2443
 	select CPU_LLSERIAL_S3C2440
 	select SAMSUNG_CLKSRC
 	select S3C2443_CLOCK
-	select S3C_GPIO_PULL_S3C2443
 	help
 	  Support for the S3C2443 SoC from the S3C24XX line
 
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 8c5b3029b39..d8973ac46bc 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -9,7 +9,6 @@ config PLAT_S3C24XX
 	select NO_IOPORT
 	select ARCH_REQUIRE_GPIOLIB
 	select S3C_DEV_NAND
-	select S3C_GPIO_CFG_S3C24XX
 	help
 	  Base platform code for any Samsung S3C24XX device
 
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index 9843c954c04..ac610bee2cb 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -16,9 +16,6 @@ config PLAT_S5P
 	select S3C_GPIO_TRACK
 	select S5P_GPIO_DRVSTR
 	select SAMSUNG_GPIOLIB_4BIT
-	select S3C_GPIO_CFG_S3C64XX
-	select S3C_GPIO_PULL_UPDOWN
-	select S3C_GPIO_CFG_S3C24XX
 	select PLAT_SAMSUNG
 	select SAMSUNG_CLKSRC
 	select SAMSUNG_IRQ_VIC_TIMER
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index b3e10659e4b..1f346d22323 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -79,39 +79,12 @@ config SAMSUNG_GPIOLIB_4BIT
 	  configuration. GPIOlib shall be compiled only for S3C64XX and S5P
 	  series of processors.
 
-config S3C_GPIO_CFG_S3C24XX
-	bool
-	help
-	  Internal configuration to enable S3C24XX style GPIO configuration
-	  functions.
-
 config S3C_GPIO_CFG_S3C64XX
 	bool
 	help
 	  Internal configuration to enable S3C64XX style GPIO configuration
 	  functions.
 
-config S3C_GPIO_PULL_UPDOWN
-	bool
-	help
-	  Internal configuration to enable the correct GPIO pull helper
-
-config S3C_GPIO_PULL_S3C2443
-	bool
-	select S3C_GPIO_PULL_UPDOWN
-	help
-	  Internal configuration to enable the correct GPIO pull helper for S3C2443-style GPIO
-
-config S3C_GPIO_PULL_DOWN
-	bool
-	help
-	  Internal configuration to enable the correct GPIO pull helper
-
-config S3C_GPIO_PULL_UP
-	bool
-	help
-	  Internal configuration to enable the correct GPIO pull helper
-
 config S5P_GPIO_DRVSTR
 	bool
 	help
-- 
cgit v1.2.3-18-g5258


From 41bc3186b3c92a4ca05e2aa14bb6272fb491e679 Mon Sep 17 00:00:00 2001
From: Zhao Jin <cronozhj@gmail.com>
Date: Mon, 19 Sep 2011 12:19:51 +0800
Subject: KVM: MMU: fix incorrect return of spte

__update_clear_spte_slow should return original spte while the
current code returns low half of original spte combined with high
half of new spte.

Signed-off-by: Zhao Jin <cronozhj@gmail.com>
Reviewed-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
 arch/x86/kvm/mmu.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 1c5b69373a0..8e8da7960db 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -400,7 +400,8 @@ static u64 __update_clear_spte_slow(u64 *sptep, u64 spte)
 
 	/* xchg acts as a barrier before the setting of the high bits */
 	orig.spte_low = xchg(&ssptep->spte_low, sspte.spte_low);
-	orig.spte_high = ssptep->spte_high = sspte.spte_high;
+	orig.spte_high = ssptep->spte_high;
+	ssptep->spte_high = sspte.spte_high;
 	count_spte_clear(sptep, spte);
 
 	return orig.spte;
-- 
cgit v1.2.3-18-g5258


From 9be3be1f153e90ea4e1e5b6ed1d72a73d44318d1 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Tue, 13 Sep 2011 10:45:38 +0300
Subject: KVM: x86 emulator: fix Src2CL decode

Src2CL decode (used for double width shifts) erronously decodes only bit 3
of %rcx, instead of bits 7:0.

Fix by decoding %cl in its entirety.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
 arch/x86/kvm/emulate.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 6f08bc940fa..8b4cc5f067d 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -3603,7 +3603,7 @@ done_prefixes:
 		break;
 	case Src2CL:
 		ctxt->src2.bytes = 1;
-		ctxt->src2.val = ctxt->regs[VCPU_REGS_RCX] & 0x8;
+		ctxt->src2.val = ctxt->regs[VCPU_REGS_RCX] & 0xff;
 		break;
 	case Src2ImmByte:
 		rc = decode_imm(ctxt, &ctxt->src2, 1, true);
-- 
cgit v1.2.3-18-g5258


From 4344646ff127eaea4d58266ccd8fdd2a38fb9672 Mon Sep 17 00:00:00 2001
From: Heiko Stuebner <heiko@sntech.de>
Date: Mon, 26 Sep 2011 10:30:29 +0900
Subject: ARM: S3C2443: Fix bit-reset in setrate of clk_armdiv

The changed statement should set the old armdiv bits to 0
and not everything else, before setting the new value.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c2443/clock.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index a1a7176675b..38058af4897 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -128,7 +128,7 @@ static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate)
 		unsigned long clkcon0;
 
 		clkcon0 = __raw_readl(S3C2443_CLKDIV0);
-		clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK;
+		clkcon0 &= ~S3C2443_CLKDIV0_ARMDIV_MASK;
 		clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT;
 		__raw_writel(clkcon0, S3C2443_CLKDIV0);
 	}
-- 
cgit v1.2.3-18-g5258


From b76f7cdca5af18fa7a59a5c8a9eb5e02418e827a Mon Sep 17 00:00:00 2001
From: Marek Szyprowski <m.szyprowski@samsung.com>
Date: Mon, 26 Sep 2011 13:16:45 +0900
Subject: ARM: S5P: fix incorrect loop iterator usage on gpio-interrupt

Loop iterator value after terminating list_for_each_entry()
is not NULL. This patch fixes incorrect iterator usage in
GPIO interrupt code for SAMSUNG S5P platforms.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/plat-s5p/irq-gpioint.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c
index f71078ef6bb..f88216d2399 100644
--- a/arch/arm/plat-s5p/irq-gpioint.c
+++ b/arch/arm/plat-s5p/irq-gpioint.c
@@ -114,17 +114,18 @@ static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip)
 {
 	static int used_gpioint_groups = 0;
 	int group = chip->group;
-	struct s5p_gpioint_bank *bank = NULL;
+	struct s5p_gpioint_bank *b, *bank = NULL;
 	struct irq_chip_generic *gc;
 	struct irq_chip_type *ct;
 
 	if (used_gpioint_groups >= S5P_GPIOINT_GROUP_COUNT)
 		return -ENOMEM;
 
-	list_for_each_entry(bank, &banks, list) {
-		if (group >= bank->start &&
-		    group < bank->start + bank->nr_groups)
+	list_for_each_entry(b, &banks, list) {
+		if (group >= b->start && group < b->start + b->nr_groups) {
+			bank = b;
 			break;
+		}
 	}
 	if (!bank)
 		return -EINVAL;
-- 
cgit v1.2.3-18-g5258


From d5160ecffce97ad354caa5a8762edb8c350f9e84 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Mon, 26 Sep 2011 13:18:28 +0900
Subject: ARM: S3C64xx: Add LDOVDD supply for CODEC on Cragganmore

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c64xx/mach-crag6410.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index a0422a71999..ed332dd7bf4 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -567,6 +567,7 @@ static struct regulator_init_data pvdd_1v2 __initdata = {
 };
 
 static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = {
+	REGULATOR_SUPPLY("LDOVDD", "1-001a"),
 	REGULATOR_SUPPLY("PLLVDD", "1-001a"),
 	REGULATOR_SUPPLY("DBVDD", "1-001a"),
 	REGULATOR_SUPPLY("DBVDD1", "1-001a"),
-- 
cgit v1.2.3-18-g5258


From d8e89b47e00ee80e920761145144640aac4cf71a Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Thu, 22 Sep 2011 10:32:25 +0100
Subject: ARM: dma-mapping: free allocated page if unable to map

If the attempt to map a page for DMA fails (eg, because we're out of
mapping space) then we must not hold on to the page we allocated for
DMA - doing so will result in a memory leak.

Cc: <stable@kernel.org>
Reported-by: Bryan Phillippe <bp@darkforest.org>
Tested-by: Bryan Phillippe <bp@darkforest.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/dma-mapping.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 0a0a1e7c20d..c3ff82f92d9 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -324,6 +324,8 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
 
 	if (addr)
 		*handle = pfn_to_dma(dev, page_to_pfn(page));
+	else
+		__dma_free_buffer(page, size);
 
 	return addr;
 }
-- 
cgit v1.2.3-18-g5258


From df77abcafc8dc881b6c9347548651777088e4b27 Mon Sep 17 00:00:00 2001
From: Will Deacon <will.deacon@arm.com>
Date: Fri, 23 Sep 2011 14:34:12 +0100
Subject: ARM: 7099/1: futex: preserve oldval in SMP __futex_atomic_op

The SMP implementation of __futex_atomic_op clobbers oldval with the
status flag from the exclusive store. This causes it to always read as
zero when performing the FUTEX_OP_CMP_* operation.

This patch updates the ARM __futex_atomic_op implementations to take a
tmp argument, allowing us to store the strex status flag without
overwriting the register containing oldval.

Cc: stable@kernel.org
Reported-by: Minho Ban <mhban@samsung.com>
Reviewed-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/futex.h | 34 +++++++++++++++++-----------------
 1 file changed, 17 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h
index 8c73900da9e..253cc86318b 100644
--- a/arch/arm/include/asm/futex.h
+++ b/arch/arm/include/asm/futex.h
@@ -25,17 +25,17 @@
 
 #ifdef CONFIG_SMP
 
-#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)	\
+#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg)	\
 	smp_mb();						\
 	__asm__ __volatile__(					\
-	"1:	ldrex	%1, [%2]\n"				\
+	"1:	ldrex	%1, [%3]\n"				\
 	"	" insn "\n"					\
-	"2:	strex	%1, %0, [%2]\n"				\
-	"	teq	%1, #0\n"				\
+	"2:	strex	%2, %0, [%3]\n"				\
+	"	teq	%2, #0\n"				\
 	"	bne	1b\n"					\
 	"	mov	%0, #0\n"				\
-	__futex_atomic_ex_table("%4")				\
-	: "=&r" (ret), "=&r" (oldval)				\
+	__futex_atomic_ex_table("%5")				\
+	: "=&r" (ret), "=&r" (oldval), "=&r" (tmp)		\
 	: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT)		\
 	: "cc", "memory")
 
@@ -73,14 +73,14 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 #include <linux/preempt.h>
 #include <asm/domain.h>
 
-#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)	\
+#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg)	\
 	__asm__ __volatile__(					\
-	"1:	" T(ldr) "	%1, [%2]\n"			\
+	"1:	" T(ldr) "	%1, [%3]\n"			\
 	"	" insn "\n"					\
-	"2:	" T(str) "	%0, [%2]\n"			\
+	"2:	" T(str) "	%0, [%3]\n"			\
 	"	mov	%0, #0\n"				\
-	__futex_atomic_ex_table("%4")				\
-	: "=&r" (ret), "=&r" (oldval)				\
+	__futex_atomic_ex_table("%5")				\
+	: "=&r" (ret), "=&r" (oldval), "=&r" (tmp)		\
 	: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT)		\
 	: "cc", "memory")
 
@@ -117,7 +117,7 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
 	int cmp = (encoded_op >> 24) & 15;
 	int oparg = (encoded_op << 8) >> 20;
 	int cmparg = (encoded_op << 20) >> 20;
-	int oldval = 0, ret;
+	int oldval = 0, ret, tmp;
 
 	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
 		oparg = 1 << oparg;
@@ -129,19 +129,19 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
 
 	switch (op) {
 	case FUTEX_OP_SET:
-		__futex_atomic_op("mov	%0, %3", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("mov	%0, %4", ret, oldval, tmp, uaddr, oparg);
 		break;
 	case FUTEX_OP_ADD:
-		__futex_atomic_op("add	%0, %1, %3", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("add	%0, %1, %4", ret, oldval, tmp, uaddr, oparg);
 		break;
 	case FUTEX_OP_OR:
-		__futex_atomic_op("orr	%0, %1, %3", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("orr	%0, %1, %4", ret, oldval, tmp, uaddr, oparg);
 		break;
 	case FUTEX_OP_ANDN:
-		__futex_atomic_op("and	%0, %1, %3", ret, oldval, uaddr, ~oparg);
+		__futex_atomic_op("and	%0, %1, %4", ret, oldval, tmp, uaddr, ~oparg);
 		break;
 	case FUTEX_OP_XOR:
-		__futex_atomic_op("eor	%0, %1, %3", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("eor	%0, %1, %4", ret, oldval, tmp, uaddr, oparg);
 		break;
 	default:
 		ret = -ENOSYS;
-- 
cgit v1.2.3-18-g5258


From 83427c23a44e34be2985f5b1440c645ea8577938 Mon Sep 17 00:00:00 2001
From: Sylwester Nawrocki <s.nawrocki@samsung.com>
Date: Tue, 27 Sep 2011 07:00:53 +0900
Subject: ARM: S5PV210: Rename sclk_cam clocks for FIMC media driver

The sclk_cam clocks are now controlled by the top level FIMC media
device driver bound to "s5p-fimc-md" platform device.
Rename sclk_cam clocks so they accessible by the corresponding
driver.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s5pv210/clock.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index 52a8e607bcc..f5f8fa89679 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -815,8 +815,7 @@ static struct clksrc_clk clksrcs[] = {
 		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 20, .size = 4 },
 	}, {
 		.clk		= {
-			.name		= "sclk_cam",
-			.devname	= "s5pv210-fimc.0",
+			.name		= "sclk_cam0",
 			.enable		= s5pv210_clk_mask0_ctrl,
 			.ctrlbit	= (1 << 3),
 		},
@@ -825,8 +824,7 @@ static struct clksrc_clk clksrcs[] = {
 		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 4 },
 	}, {
 		.clk		= {
-			.name		= "sclk_cam",
-			.devname	= "s5pv210-fimc.1",
+			.name		= "sclk_cam1",
 			.enable		= s5pv210_clk_mask0_ctrl,
 			.ctrlbit	= (1 << 4),
 		},
-- 
cgit v1.2.3-18-g5258


From 00aaad227aeb30800ac85b981f3ea4e20ae9bd9e Mon Sep 17 00:00:00 2001
From: Sylwester Nawrocki <s.nawrocki@samsung.com>
Date: Tue, 27 Sep 2011 07:00:59 +0900
Subject: ARM: EXYNOS4: Rename sclk_cam clocks for FIMC driver

The sclk_cam clocks are now controlled by the top level FIMC media
device driver bound to "s5p-fimc-md" platform device.
Rename sclk_cam clocks so they accessible by the corresponding
driver.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/clock.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos4/clock.c
index 79d6cd0c8e7..86964d2e9e1 100644
--- a/arch/arm/mach-exynos4/clock.c
+++ b/arch/arm/mach-exynos4/clock.c
@@ -899,8 +899,7 @@ static struct clksrc_clk clksrcs[] = {
 		.reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 28, .size = 4 },
 	}, {
 		.clk		= {
-			.name		= "sclk_cam",
-			.devname	= "exynos4-fimc.0",
+			.name		= "sclk_cam0",
 			.enable		= exynos4_clksrc_mask_cam_ctrl,
 			.ctrlbit	= (1 << 16),
 		},
@@ -909,8 +908,7 @@ static struct clksrc_clk clksrcs[] = {
 		.reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 16, .size = 4 },
 	}, {
 		.clk		= {
-			.name		= "sclk_cam",
-			.devname	= "exynos4-fimc.1",
+			.name		= "sclk_cam1",
 			.enable		= exynos4_clksrc_mask_cam_ctrl,
 			.ctrlbit	= (1 << 20),
 		},
-- 
cgit v1.2.3-18-g5258


From 24f9e1f31471abbd2af62eb529deee90bad4c65c Mon Sep 17 00:00:00 2001
From: Sachin Kamat <sachin.kamat@linaro.org>
Date: Wed, 31 Aug 2011 15:47:16 +0900
Subject: ARM: EXYNOS4: Add USB EHCI device to ORIGEN board

Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
[kgene.kim@samsung.com: re-ordering changes in Kconfig]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/Kconfig       |  2 ++
 arch/arm/mach-exynos4/mach-origen.c | 17 +++++++++++++++++
 2 files changed, 19 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index 3ceefdbadd1..3034a736f82 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -224,7 +224,9 @@ config MACH_ORIGEN
 	select S3C_DEV_RTC
 	select S3C_DEV_WDT
 	select S3C_DEV_HSMMC2
+	select S5P_DEV_USB_EHCI
 	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS4_SETUP_USB_PHY
 	help
 	  Machine support for ORIGEN based on Samsung EXYNOS4210
 
diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c
index ed59f86001a..d101756ef7d 100644
--- a/arch/arm/mach-exynos4/mach-origen.c
+++ b/arch/arm/mach-exynos4/mach-origen.c
@@ -24,6 +24,8 @@
 #include <plat/devs.h>
 #include <plat/sdhci.h>
 #include <plat/iic.h>
+#include <plat/ehci.h>
+#include <plat/clock.h>
 
 #include <mach/map.h>
 
@@ -79,10 +81,21 @@ static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = {
 	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 };
 
+/* USB EHCI */
+static struct s5p_ehci_platdata origen_ehci_pdata;
+
+static void __init origen_ehci_init(void)
+{
+	struct s5p_ehci_platdata *pdata = &origen_ehci_pdata;
+
+	s5p_ehci_set_platdata(pdata);
+}
+
 static struct platform_device *origen_devices[] __initdata = {
 	&s3c_device_hsmmc2,
 	&s3c_device_rtc,
 	&s3c_device_wdt,
+	&s5p_device_ehci,
 };
 
 static void __init origen_map_io(void)
@@ -95,6 +108,10 @@ static void __init origen_map_io(void)
 static void __init origen_machine_init(void)
 {
 	s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
+
+	origen_ehci_init();
+	clk_xusbxti.rate = 24000000;
+
 	platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
 }
 
-- 
cgit v1.2.3-18-g5258


From 6f8eb324a395da5bd0c0b113944f2906272e14bd Mon Sep 17 00:00:00 2001
From: Sachin Kamat <sachin.kamat@linaro.org>
Date: Wed, 31 Aug 2011 15:52:27 +0900
Subject: ARM: EXYNOS4: Add FIMC device on ORIGEN board

This patch adds definitions to enable support for s5p-fimc
driver on ORIGEN board.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
[kgene.kim@samsung.com: re-ordering changes]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/Kconfig       | 4 ++++
 arch/arm/mach-exynos4/mach-origen.c | 4 ++++
 2 files changed, 8 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index 3034a736f82..9c920b2acc3 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -224,6 +224,10 @@ config MACH_ORIGEN
 	select S3C_DEV_RTC
 	select S3C_DEV_WDT
 	select S3C_DEV_HSMMC2
+	select S5P_DEV_FIMC0
+	select S5P_DEV_FIMC1
+	select S5P_DEV_FIMC2
+	select S5P_DEV_FIMC3
 	select S5P_DEV_USB_EHCI
 	select EXYNOS4_SETUP_SDHCI
 	select EXYNOS4_SETUP_USB_PHY
diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c
index d101756ef7d..7ac71878767 100644
--- a/arch/arm/mach-exynos4/mach-origen.c
+++ b/arch/arm/mach-exynos4/mach-origen.c
@@ -96,6 +96,10 @@ static struct platform_device *origen_devices[] __initdata = {
 	&s3c_device_rtc,
 	&s3c_device_wdt,
 	&s5p_device_ehci,
+	&s5p_device_fimc0,
+	&s5p_device_fimc1,
+	&s5p_device_fimc2,
+	&s5p_device_fimc3,
 };
 
 static void __init origen_map_io(void)
-- 
cgit v1.2.3-18-g5258


From 9edff0f79f5b98e6abfabfa27b31d155e3c994e1 Mon Sep 17 00:00:00 2001
From: Giridhar Maruthy <giridhar.maruthy@linaro.org>
Date: Wed, 31 Aug 2011 15:58:52 +0900
Subject: ARM: EXYNOS4: Add PWM backlight support on ORIGEN

This patch adds support for LCD backlight using PWM timer
on ORIGEN board.

Signed-off-by: Giridhar Maruthy <giridhar.maruthy@linaro.org>
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/Kconfig       |  2 ++
 arch/arm/mach-exynos4/mach-origen.c | 16 ++++++++++++++++
 2 files changed, 18 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index 9c920b2acc3..86cf4fd47b3 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -229,6 +229,8 @@ config MACH_ORIGEN
 	select S5P_DEV_FIMC2
 	select S5P_DEV_FIMC3
 	select S5P_DEV_USB_EHCI
+	select SAMSUNG_DEV_BACKLIGHT
+	select SAMSUNG_DEV_PWM
 	select EXYNOS4_SETUP_SDHCI
 	select EXYNOS4_SETUP_USB_PHY
 	help
diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c
index 7ac71878767..937db75688d 100644
--- a/arch/arm/mach-exynos4/mach-origen.c
+++ b/arch/arm/mach-exynos4/mach-origen.c
@@ -14,6 +14,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/input.h>
+#include <linux/pwm_backlight.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
@@ -26,6 +27,8 @@
 #include <plat/iic.h>
 #include <plat/ehci.h>
 #include <plat/clock.h>
+#include <plat/gpio-cfg.h>
+#include <plat/backlight.h>
 
 #include <mach/map.h>
 
@@ -102,6 +105,17 @@ static struct platform_device *origen_devices[] __initdata = {
 	&s5p_device_fimc3,
 };
 
+/* LCD Backlight data */
+static struct samsung_bl_gpio_info origen_bl_gpio_info = {
+	.no = EXYNOS4_GPD0(0),
+	.func = S3C_GPIO_SFN(2),
+};
+
+static struct platform_pwm_backlight_data origen_bl_data = {
+	.pwm_id = 0,
+	.pwm_period_ns = 1000,
+};
+
 static void __init origen_map_io(void)
 {
 	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
@@ -117,6 +131,8 @@ static void __init origen_machine_init(void)
 	clk_xusbxti.rate = 24000000;
 
 	platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
+
+	samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data);
 }
 
 MACHINE_START(ORIGEN, "ORIGEN")
-- 
cgit v1.2.3-18-g5258


From 92e41efd73918d28ad48a937489e6f2a02140057 Mon Sep 17 00:00:00 2001
From: Tushar Behera <tushar.behera@linaro.org>
Date: Wed, 31 Aug 2011 16:01:15 +0900
Subject: ARM: EXYNOS4: Fix sdhci card detection for ORIGEN

Fix incorrect value of cd_type field in platform data
for sdhci device.

Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/mach-origen.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c
index 937db75688d..0e3b81634c2 100644
--- a/arch/arm/mach-exynos4/mach-origen.c
+++ b/arch/arm/mach-exynos4/mach-origen.c
@@ -78,9 +78,7 @@ static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = {
 };
 
 static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= EXYNOS4_GPK2(2),
-	.ext_cd_gpio_invert	= 1,
+	.cd_type		= S3C_SDHCI_CD_INTERNAL,
 	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 };
 
-- 
cgit v1.2.3-18-g5258


From cf1dad9d7f14ddf555baa0fcc82d17d5f29d3ae2 Mon Sep 17 00:00:00 2001
From: Tushar Behera <tushar.behera@linaro.org>
Date: Wed, 31 Aug 2011 16:57:37 +0900
Subject: ARM: EXYNOS4: Add support for secondary MMC port on ORIGEN

Secondary MMC port on ORIGEN is connected to sdhci instance 0.
Support for secondary MMC port is extended by registering
sdhci instance 0.

Since sdhci instance 2 can contain a bootable media, sdhci
instance 0 is registered after instance 2.

Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
[kgene.kim@samsung.com: Added comments in registering sdhci]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/Kconfig       |  1 +
 arch/arm/mach-exynos4/mach-origen.c | 11 +++++++++++
 2 files changed, 12 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index 86cf4fd47b3..00c645426d3 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -223,6 +223,7 @@ config MACH_ORIGEN
 	select CPU_EXYNOS4210
 	select S3C_DEV_RTC
 	select S3C_DEV_WDT
+	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC2
 	select S5P_DEV_FIMC0
 	select S5P_DEV_FIMC1
diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c
index 0e3b81634c2..cd5195f9354 100644
--- a/arch/arm/mach-exynos4/mach-origen.c
+++ b/arch/arm/mach-exynos4/mach-origen.c
@@ -77,6 +77,11 @@ static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = {
 	},
 };
 
+static struct s3c_sdhci_platdata origen_hsmmc0_pdata __initdata = {
+	.cd_type		= S3C_SDHCI_CD_INTERNAL,
+	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
 static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = {
 	.cd_type		= S3C_SDHCI_CD_INTERNAL,
 	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
@@ -94,6 +99,7 @@ static void __init origen_ehci_init(void)
 
 static struct platform_device *origen_devices[] __initdata = {
 	&s3c_device_hsmmc2,
+	&s3c_device_hsmmc0,
 	&s3c_device_rtc,
 	&s3c_device_wdt,
 	&s5p_device_ehci,
@@ -123,7 +129,12 @@ static void __init origen_map_io(void)
 
 static void __init origen_machine_init(void)
 {
+	/*
+	 * Since sdhci instance 2 can contain a bootable media,
+	 * sdhci instance 0 is registered after instance 2.
+	 */
 	s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
+	s3c_sdhci0_set_platdata(&origen_hsmmc0_pdata);
 
 	origen_ehci_init();
 	clk_xusbxti.rate = 24000000;
-- 
cgit v1.2.3-18-g5258


From c86cfdd012498ddab2b2eb23fad201637a77acf4 Mon Sep 17 00:00:00 2001
From: Sachin Kamat <sachin.kamat@linaro.org>
Date: Fri, 16 Sep 2011 21:41:25 +0900
Subject: ARM: EXYNOS4: Add keypad support for ORIGEN

This patch adds keypad support for ORIGEN board as GPIO keys.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/mach-origen.c | 58 +++++++++++++++++++++++++++++++++++++
 1 file changed, 58 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c
index cd5195f9354..3d67140aaea 100644
--- a/arch/arm/mach-exynos4/mach-origen.c
+++ b/arch/arm/mach-exynos4/mach-origen.c
@@ -15,6 +15,7 @@
 #include <linux/io.h>
 #include <linux/input.h>
 #include <linux/pwm_backlight.h>
+#include <linux/gpio_keys.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
@@ -97,6 +98,62 @@ static void __init origen_ehci_init(void)
 	s5p_ehci_set_platdata(pdata);
 }
 
+static struct gpio_keys_button origen_gpio_keys_table[] = {
+	{
+		.code			= KEY_MENU,
+		.gpio			= EXYNOS4_GPX1(5),
+		.desc			= "gpio-keys: KEY_MENU",
+		.type			= EV_KEY,
+		.active_low		= 1,
+		.wakeup			= 1,
+		.debounce_interval	= 1,
+	}, {
+		.code			= KEY_HOME,
+		.gpio			= EXYNOS4_GPX1(6),
+		.desc			= "gpio-keys: KEY_HOME",
+		.type			= EV_KEY,
+		.active_low		= 1,
+		.wakeup			= 1,
+		.debounce_interval	= 1,
+	}, {
+		.code			= KEY_BACK,
+		.gpio			= EXYNOS4_GPX1(7),
+		.desc			= "gpio-keys: KEY_BACK",
+		.type			= EV_KEY,
+		.active_low		= 1,
+		.wakeup			= 1,
+		.debounce_interval	= 1,
+	}, {
+		.code			= KEY_UP,
+		.gpio			= EXYNOS4_GPX2(0),
+		.desc			= "gpio-keys: KEY_UP",
+		.type			= EV_KEY,
+		.active_low		= 1,
+		.wakeup			= 1,
+		.debounce_interval	= 1,
+	}, {
+		.code			= KEY_DOWN,
+		.gpio			= EXYNOS4_GPX2(1),
+		.desc			= "gpio-keys: KEY_DOWN",
+		.type			= EV_KEY,
+		.active_low		= 1,
+		.wakeup			= 1,
+		.debounce_interval	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data origen_gpio_keys_data = {
+	.buttons	= origen_gpio_keys_table,
+	.nbuttons	= ARRAY_SIZE(origen_gpio_keys_table),
+};
+
+static struct platform_device origen_device_gpiokeys = {
+	.name		= "gpio-keys",
+	.dev		= {
+		.platform_data	= &origen_gpio_keys_data,
+	},
+};
+
 static struct platform_device *origen_devices[] __initdata = {
 	&s3c_device_hsmmc2,
 	&s3c_device_hsmmc0,
@@ -107,6 +164,7 @@ static struct platform_device *origen_devices[] __initdata = {
 	&s5p_device_fimc1,
 	&s5p_device_fimc2,
 	&s5p_device_fimc3,
+	&origen_device_gpiokeys,
 };
 
 /* LCD Backlight data */
-- 
cgit v1.2.3-18-g5258


From 6ca3f8bdf8253504426935c97cabb44bdc6f5888 Mon Sep 17 00:00:00 2001
From: Sachin Kamat <sachin.kamat@linaro.org>
Date: Sat, 17 Sep 2011 11:42:43 +0900
Subject: ARM: EXYNOS4: Add HDMI support for ORIGEN

This patch adds HDMI (TVout) support for ORIGEN board.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/Kconfig       | 2 ++
 arch/arm/mach-exynos4/mach-origen.c | 5 +++++
 2 files changed, 7 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index 00c645426d3..257dbaaf149 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -229,7 +229,9 @@ config MACH_ORIGEN
 	select S5P_DEV_FIMC1
 	select S5P_DEV_FIMC2
 	select S5P_DEV_FIMC3
+	select S5P_DEV_I2C_HDMIPHY
 	select S5P_DEV_USB_EHCI
+	select S5P_DEV_TV
 	select SAMSUNG_DEV_BACKLIGHT
 	select SAMSUNG_DEV_PWM
 	select EXYNOS4_SETUP_SDHCI
diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c
index 3d67140aaea..c8121fcf198 100644
--- a/arch/arm/mach-exynos4/mach-origen.c
+++ b/arch/arm/mach-exynos4/mach-origen.c
@@ -164,6 +164,9 @@ static struct platform_device *origen_devices[] __initdata = {
 	&s5p_device_fimc1,
 	&s5p_device_fimc2,
 	&s5p_device_fimc3,
+	&s5p_device_hdmi,
+	&s5p_device_i2c_hdmiphy,
+	&s5p_device_mixer,
 	&origen_device_gpiokeys,
 };
 
@@ -197,6 +200,8 @@ static void __init origen_machine_init(void)
 	origen_ehci_init();
 	clk_xusbxti.rate = 24000000;
 
+	s5p_i2c_hdmiphy_set_platdata(NULL);
+
 	platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
 
 	samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data);
-- 
cgit v1.2.3-18-g5258


From 6e01280f34be02e5e7635debb045aab3705bb5bf Mon Sep 17 00:00:00 2001
From: Inderpal Singh <inderpal.singh@linaro.org>
Date: Mon, 3 Oct 2011 08:51:20 +0900
Subject: ARM: EXYNOS4: Configure MAX8997 PMIC for ORIGEN

Configure MAX8997 PMIC and provide platform specific
data for ORIGEN board.

Signed-off-by: Inderpal Singh <inderpal.singh@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/mach-origen.c | 396 +++++++++++++++++++++++++++++++++++-
 1 file changed, 392 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c
index c8121fcf198..3da77766961 100644
--- a/arch/arm/mach-exynos4/mach-origen.c
+++ b/arch/arm/mach-exynos4/mach-origen.c
@@ -16,6 +16,9 @@
 #include <linux/input.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio_keys.h>
+#include <linux/i2c.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/max8997.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
@@ -78,6 +81,378 @@ static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = {
 	},
 };
 
+static struct regulator_consumer_supply __initdata ldo3_consumer[] = {
+	REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"), /* MIPI */
+};
+static struct regulator_consumer_supply __initdata ldo6_consumer[] = {
+	REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"), /* MIPI */
+};
+static struct regulator_consumer_supply __initdata ldo7_consumer[] = {
+	REGULATOR_SUPPLY("avdd", "alc5625"), /* Realtek ALC5625 */
+};
+static struct regulator_consumer_supply __initdata ldo8_consumer[] = {
+	REGULATOR_SUPPLY("vdd", "s5p-adc"), /* ADC */
+};
+static struct regulator_consumer_supply __initdata ldo9_consumer[] = {
+	REGULATOR_SUPPLY("dvdd", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
+};
+static struct regulator_consumer_supply __initdata ldo11_consumer[] = {
+	REGULATOR_SUPPLY("dvdd", "alc5625"), /* Realtek ALC5625 */
+};
+static struct regulator_consumer_supply __initdata ldo14_consumer[] = {
+	REGULATOR_SUPPLY("avdd18", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
+};
+static struct regulator_consumer_supply __initdata ldo17_consumer[] = {
+	REGULATOR_SUPPLY("vdd33", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
+};
+static struct regulator_consumer_supply __initdata buck1_consumer[] = {
+	REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */
+};
+static struct regulator_consumer_supply __initdata buck2_consumer[] = {
+	REGULATOR_SUPPLY("vdd_int", NULL), /* CPUFREQ */
+};
+static struct regulator_consumer_supply __initdata buck3_consumer[] = {
+	REGULATOR_SUPPLY("vdd_g3d", "mali_drm"), /* G3D */
+};
+static struct regulator_consumer_supply __initdata buck7_consumer[] = {
+	REGULATOR_SUPPLY("vcc", "platform-lcd"), /* LCD */
+};
+
+static struct regulator_init_data __initdata max8997_ldo1_data = {
+	.constraints	= {
+		.name		= "VDD_ABB_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.apply_uV	= 1,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+};
+
+static struct regulator_init_data __initdata max8997_ldo2_data	= {
+	.constraints	= {
+		.name		= "VDD_ALIVE_1.1V",
+		.min_uV		= 1100000,
+		.max_uV		= 1100000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+		.state_mem	= {
+			.enabled	= 1,
+		},
+	},
+};
+
+static struct regulator_init_data __initdata max8997_ldo3_data = {
+	.constraints	= {
+		.name		= "VMIPI_1.1V",
+		.min_uV		= 1100000,
+		.max_uV		= 1100000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldo3_consumer),
+	.consumer_supplies	= ldo3_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo4_data = {
+	.constraints	= {
+		.name		= "VDD_RTC_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+};
+
+static struct regulator_init_data __initdata max8997_ldo6_data = {
+	.constraints	= {
+		.name		= "VMIPI_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldo6_consumer),
+	.consumer_supplies	= ldo6_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo7_data = {
+	.constraints	= {
+		.name		= "VDD_AUD_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldo7_consumer),
+	.consumer_supplies	= ldo7_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo8_data = {
+	.constraints	= {
+		.name		= "VADC_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldo8_consumer),
+	.consumer_supplies	= ldo8_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo9_data = {
+	.constraints	= {
+		.name		= "DVDD_SWB_2.8V",
+		.min_uV		= 2800000,
+		.max_uV		= 2800000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldo9_consumer),
+	.consumer_supplies	= ldo9_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo10_data = {
+	.constraints	= {
+		.name		= "VDD_PLL_1.1V",
+		.min_uV		= 1100000,
+		.max_uV		= 1100000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+};
+
+static struct regulator_init_data __initdata max8997_ldo11_data = {
+	.constraints	= {
+		.name		= "VDD_AUD_3V",
+		.min_uV		= 3000000,
+		.max_uV		= 3000000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldo11_consumer),
+	.consumer_supplies	= ldo11_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo14_data = {
+	.constraints	= {
+		.name		= "AVDD18_SWB_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldo14_consumer),
+	.consumer_supplies	= ldo14_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo17_data = {
+	.constraints	= {
+		.name		= "VDD_SWB_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldo17_consumer),
+	.consumer_supplies	= ldo17_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo21_data = {
+	.constraints	= {
+		.name		= "VDD_MIF_1.2V",
+		.min_uV		= 1200000,
+		.max_uV		= 1200000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+};
+
+static struct regulator_init_data __initdata max8997_buck1_data = {
+	.constraints	= {
+		.name		= "VDD_ARM_1.2V",
+		.min_uV		= 950000,
+		.max_uV		= 1350000,
+		.always_on	= 1,
+		.boot_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(buck1_consumer),
+	.consumer_supplies	= buck1_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_buck2_data = {
+	.constraints	= {
+		.name		= "VDD_INT_1.1V",
+		.min_uV		= 900000,
+		.max_uV		= 1100000,
+		.always_on	= 1,
+		.boot_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(buck2_consumer),
+	.consumer_supplies	= buck2_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_buck3_data = {
+	.constraints	= {
+		.name		= "VDD_G3D_1.1V",
+		.min_uV		= 900000,
+		.max_uV		= 1100000,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
+					REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(buck3_consumer),
+	.consumer_supplies	= buck3_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_buck5_data = {
+	.constraints	= {
+		.name		= "VDDQ_M1M2_1.2V",
+		.min_uV		= 1200000,
+		.max_uV		= 1200000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+};
+
+static struct regulator_init_data __initdata max8997_buck7_data = {
+	.constraints	= {
+		.name		= "VDD_LCD_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.boot_on	= 1,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(buck7_consumer),
+	.consumer_supplies	= buck7_consumer,
+};
+
+static struct max8997_regulator_data __initdata origen_max8997_regulators[] = {
+	{ MAX8997_LDO1,		&max8997_ldo1_data },
+	{ MAX8997_LDO2,		&max8997_ldo2_data },
+	{ MAX8997_LDO3,		&max8997_ldo3_data },
+	{ MAX8997_LDO4,		&max8997_ldo4_data },
+	{ MAX8997_LDO6,		&max8997_ldo6_data },
+	{ MAX8997_LDO7,		&max8997_ldo7_data },
+	{ MAX8997_LDO8,		&max8997_ldo8_data },
+	{ MAX8997_LDO9,		&max8997_ldo9_data },
+	{ MAX8997_LDO10,	&max8997_ldo10_data },
+	{ MAX8997_LDO11,	&max8997_ldo11_data },
+	{ MAX8997_LDO14,	&max8997_ldo14_data },
+	{ MAX8997_LDO17,	&max8997_ldo17_data },
+	{ MAX8997_LDO21,	&max8997_ldo21_data },
+	{ MAX8997_BUCK1,	&max8997_buck1_data },
+	{ MAX8997_BUCK2,	&max8997_buck2_data },
+	{ MAX8997_BUCK3,	&max8997_buck3_data },
+	{ MAX8997_BUCK5,	&max8997_buck5_data },
+	{ MAX8997_BUCK7,	&max8997_buck7_data },
+};
+
+struct max8997_platform_data __initdata origen_max8997_pdata = {
+	.num_regulators = ARRAY_SIZE(origen_max8997_regulators),
+	.regulators	= origen_max8997_regulators,
+
+	.wakeup	= true,
+	.buck1_gpiodvs	= false,
+	.buck2_gpiodvs	= false,
+	.buck5_gpiodvs	= false,
+	.irq_base	= IRQ_GPIO_END + 1,
+
+	.ignore_gpiodvs_side_effect = true,
+	.buck125_default_idx = 0x0,
+
+	.buck125_gpios[0]	= EXYNOS4_GPX0(0),
+	.buck125_gpios[1]	= EXYNOS4_GPX0(1),
+	.buck125_gpios[2]	= EXYNOS4_GPX0(2),
+
+	.buck1_voltage[0]	= 1350000,
+	.buck1_voltage[1]	= 1300000,
+	.buck1_voltage[2]	= 1250000,
+	.buck1_voltage[3]	= 1200000,
+	.buck1_voltage[4]	= 1150000,
+	.buck1_voltage[5]	= 1100000,
+	.buck1_voltage[6]	= 1000000,
+	.buck1_voltage[7]	= 950000,
+
+	.buck2_voltage[0]	= 1100000,
+	.buck2_voltage[1]	= 1100000,
+	.buck2_voltage[2]	= 1100000,
+	.buck2_voltage[3]	= 1100000,
+	.buck2_voltage[4]	= 1000000,
+	.buck2_voltage[5]	= 1000000,
+	.buck2_voltage[6]	= 1000000,
+	.buck2_voltage[7]	= 1000000,
+
+	.buck5_voltage[0]	= 1200000,
+	.buck5_voltage[1]	= 1200000,
+	.buck5_voltage[2]	= 1200000,
+	.buck5_voltage[3]	= 1200000,
+	.buck5_voltage[4]	= 1200000,
+	.buck5_voltage[5]	= 1200000,
+	.buck5_voltage[6]	= 1200000,
+	.buck5_voltage[7]	= 1200000,
+};
+
+/* I2C0 */
+static struct i2c_board_info i2c0_devs[] __initdata = {
+	{
+		I2C_BOARD_INFO("max8997", (0xCC >> 1)),
+		.platform_data	= &origen_max8997_pdata,
+		.irq		= IRQ_EINT(4),
+	},
+};
+
 static struct s3c_sdhci_platdata origen_hsmmc0_pdata __initdata = {
 	.cd_type		= S3C_SDHCI_CD_INTERNAL,
 	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
@@ -155,6 +530,7 @@ static struct platform_device origen_device_gpiokeys = {
 };
 
 static struct platform_device *origen_devices[] __initdata = {
+	&s3c_device_i2c0,
 	&s3c_device_hsmmc2,
 	&s3c_device_hsmmc0,
 	&s3c_device_rtc,
@@ -172,13 +548,13 @@ static struct platform_device *origen_devices[] __initdata = {
 
 /* LCD Backlight data */
 static struct samsung_bl_gpio_info origen_bl_gpio_info = {
-	.no = EXYNOS4_GPD0(0),
-	.func = S3C_GPIO_SFN(2),
+	.no		= EXYNOS4_GPD0(0),
+	.func		= S3C_GPIO_SFN(2),
 };
 
 static struct platform_pwm_backlight_data origen_bl_data = {
-	.pwm_id = 0,
-	.pwm_period_ns = 1000,
+	.pwm_id		= 0,
+	.pwm_period_ns	= 1000,
 };
 
 static void __init origen_map_io(void)
@@ -188,8 +564,20 @@ static void __init origen_map_io(void)
 	s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
 }
 
+static void __init origen_power_init(void)
+{
+	gpio_request(EXYNOS4_GPX0(4), "PMIC_IRQ");
+	s3c_gpio_cfgpin(EXYNOS4_GPX0(4), S3C_GPIO_SFN(0xf));
+	s3c_gpio_setpull(EXYNOS4_GPX0(4), S3C_GPIO_PULL_NONE);
+}
+
 static void __init origen_machine_init(void)
 {
+	origen_power_init();
+
+	s3c_i2c0_set_platdata(NULL);
+	i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));
+
 	/*
 	 * Since sdhci instance 2 can contain a bootable media,
 	 * sdhci instance 0 is registered after instance 2.
-- 
cgit v1.2.3-18-g5258


From 9421a76d2bfec62b89b395033d03eea44bb2a4ac Mon Sep 17 00:00:00 2001
From: Tushar Behera <tushar.behera@linaro.org>
Date: Mon, 3 Oct 2011 09:12:56 +0900
Subject: ARM: EXYNOS4: Add machine support for 7" LCD on ORIGEN

ORIGEN board is fitted with 7" LCD panel HV070WSA. The pixel
resolution of the LCD panel is 1024x600.

Also power domain device for LCD0 is registered.

Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/Kconfig       |  5 ++-
 arch/arm/mach-exynos4/mach-origen.c | 63 ++++++++++++++++++++++++++++++++++++-
 2 files changed, 66 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index 257dbaaf149..6fc17228a63 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -229,11 +229,14 @@ config MACH_ORIGEN
 	select S5P_DEV_FIMC1
 	select S5P_DEV_FIMC2
 	select S5P_DEV_FIMC3
+	select S5P_DEV_FIMD0
 	select S5P_DEV_I2C_HDMIPHY
-	select S5P_DEV_USB_EHCI
 	select S5P_DEV_TV
+	select S5P_DEV_USB_EHCI
+	select EXYNOS4_DEV_PD
 	select SAMSUNG_DEV_BACKLIGHT
 	select SAMSUNG_DEV_PWM
+	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_SDHCI
 	select EXYNOS4_SETUP_USB_PHY
 	help
diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c
index 3da77766961..349e2977b2e 100644
--- a/arch/arm/mach-exynos4/mach-origen.c
+++ b/arch/arm/mach-exynos4/mach-origen.c
@@ -19,11 +19,15 @@
 #include <linux/i2c.h>
 #include <linux/regulator/machine.h>
 #include <linux/mfd/max8997.h>
+#include <linux/lcd.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
+#include <video/platform_lcd.h>
+
 #include <plat/regs-serial.h>
+#include <plat/regs-fb-v4.h>
 #include <plat/exynos4.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
@@ -33,6 +37,8 @@
 #include <plat/clock.h>
 #include <plat/gpio-cfg.h>
 #include <plat/backlight.h>
+#include <plat/pd.h>
+#include <plat/fb.h>
 
 #include <mach/map.h>
 
@@ -529,10 +535,59 @@ static struct platform_device origen_device_gpiokeys = {
 	},
 };
 
+static void lcd_hv070wsa_set_power(struct plat_lcd_data *pd, unsigned int power)
+{
+	int ret;
+
+	if (power)
+		ret = gpio_request_one(EXYNOS4_GPE3(4),
+					GPIOF_OUT_INIT_HIGH, "GPE3_4");
+	else
+		ret = gpio_request_one(EXYNOS4_GPE3(4),
+					GPIOF_OUT_INIT_LOW, "GPE3_4");
+
+	gpio_free(EXYNOS4_GPE3(4));
+
+	if (ret)
+		pr_err("failed to request gpio for LCD power: %d\n", ret);
+}
+
+static struct plat_lcd_data origen_lcd_hv070wsa_data = {
+	.set_power = lcd_hv070wsa_set_power,
+};
+
+static struct platform_device origen_lcd_hv070wsa = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s5p_device_fimd0.dev,
+	.dev.platform_data	= &origen_lcd_hv070wsa_data,
+};
+
+static struct s3c_fb_pd_win origen_fb_win0 = {
+	.win_mode = {
+		.left_margin	= 64,
+		.right_margin	= 16,
+		.upper_margin	= 64,
+		.lower_margin	= 16,
+		.hsync_len	= 48,
+		.vsync_len	= 3,
+		.xres		= 1024,
+		.yres		= 600,
+	},
+	.max_bpp		= 32,
+	.default_bpp		= 24,
+};
+
+static struct s3c_fb_platdata origen_lcd_pdata __initdata = {
+	.win[0]		= &origen_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
+};
+
 static struct platform_device *origen_devices[] __initdata = {
-	&s3c_device_i2c0,
 	&s3c_device_hsmmc2,
 	&s3c_device_hsmmc0,
+	&s3c_device_i2c0,
 	&s3c_device_rtc,
 	&s3c_device_wdt,
 	&s5p_device_ehci,
@@ -540,10 +595,13 @@ static struct platform_device *origen_devices[] __initdata = {
 	&s5p_device_fimc1,
 	&s5p_device_fimc2,
 	&s5p_device_fimc3,
+	&s5p_device_fimd0,
 	&s5p_device_hdmi,
 	&s5p_device_i2c_hdmiphy,
 	&s5p_device_mixer,
+	&exynos4_device_pd[PD_LCD0],
 	&origen_device_gpiokeys,
+	&origen_lcd_hv070wsa,
 };
 
 /* LCD Backlight data */
@@ -590,7 +648,10 @@ static void __init origen_machine_init(void)
 
 	s5p_i2c_hdmiphy_set_platdata(NULL);
 
+	s5p_fimd0_set_platdata(&origen_lcd_pdata);
+
 	platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
+	s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
 
 	samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data);
 }
-- 
cgit v1.2.3-18-g5258


From 3c76669998905afe2f8dd3f9a95c9936aaf9c4ff Mon Sep 17 00:00:00 2001
From: Sachin Kamat <sachin.kamat@linaro.org>
Date: Mon, 3 Oct 2011 09:16:53 +0900
Subject: ARM: EXYNOS4: Add HPD and PD support for HDMI on ORIGEN

This patch adds hot plug detection(HPD) and power domain(PD)
support for HDMI on ORIGEN board.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/mach-origen.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c
index 349e2977b2e..18909cf6c07 100644
--- a/arch/arm/mach-exynos4/mach-origen.c
+++ b/arch/arm/mach-exynos4/mach-origen.c
@@ -600,6 +600,7 @@ static struct platform_device *origen_devices[] __initdata = {
 	&s5p_device_i2c_hdmiphy,
 	&s5p_device_mixer,
 	&exynos4_device_pd[PD_LCD0],
+	&exynos4_device_pd[PD_TV],
 	&origen_device_gpiokeys,
 	&origen_lcd_hv070wsa,
 };
@@ -615,6 +616,14 @@ static struct platform_pwm_backlight_data origen_bl_data = {
 	.pwm_period_ns	= 1000,
 };
 
+static void s5p_tv_setup(void)
+{
+	/* Direct HPD to HDMI chip */
+	gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug");
+	s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
+	s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
+}
+
 static void __init origen_map_io(void)
 {
 	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
@@ -646,6 +655,7 @@ static void __init origen_machine_init(void)
 	origen_ehci_init();
 	clk_xusbxti.rate = 24000000;
 
+	s5p_tv_setup();
 	s5p_i2c_hdmiphy_set_platdata(NULL);
 
 	s5p_fimd0_set_platdata(&origen_lcd_pdata);
@@ -653,6 +663,9 @@ static void __init origen_machine_init(void)
 	platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
 	s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
 
+	s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev;
+	s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev;
+
 	samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data);
 }
 
-- 
cgit v1.2.3-18-g5258


From f3f5bfe234f562772392558dcf29a75d3229115c Mon Sep 17 00:00:00 2001
From: Marek Szyprowski <m.szyprowski@samsung.com>
Date: Thu, 11 Aug 2011 19:55:40 +0900
Subject: ARM: EXYNOS4: enable frame buffer on Universal C210 board

This patch adds platform definitions to enable s3c-fb driver.
Framebuffer window with 480x800x16bpp mode has been defined.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/Kconfig               |  2 ++
 arch/arm/mach-exynos4/mach-universal_c210.c | 34 +++++++++++++++++++++++++++++
 2 files changed, 36 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index 6fc17228a63..bfdb6959f60 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -178,6 +178,7 @@ config MACH_UNIVERSAL_C210
 	select S5P_DEV_FIMC1
 	select S5P_DEV_FIMC2
 	select S5P_DEV_FIMC3
+	select S5P_DEV_FIMD0
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
@@ -187,6 +188,7 @@ config MACH_UNIVERSAL_C210
 	select S5P_DEV_MFC
 	select S5P_DEV_ONENAND
 	select EXYNOS4_DEV_PD
+	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_I2C1
 	select EXYNOS4_SETUP_I2C3
 	select EXYNOS4_SETUP_I2C5
diff --git a/arch/arm/mach-exynos4/mach-universal_c210.c b/arch/arm/mach-exynos4/mach-universal_c210.c
index b3b5d891100..3ca7f3a8c2c 100644
--- a/arch/arm/mach-exynos4/mach-universal_c210.c
+++ b/arch/arm/mach-exynos4/mach-universal_c210.c
@@ -13,6 +13,7 @@
 #include <linux/i2c.h>
 #include <linux/gpio_keys.h>
 #include <linux/gpio.h>
+#include <linux/fb.h>
 #include <linux/mfd/max8998.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
@@ -31,9 +32,11 @@
 #include <plat/devs.h>
 #include <plat/iic.h>
 #include <plat/gpio-cfg.h>
+#include <plat/fb.h>
 #include <plat/mfc.h>
 #include <plat/sdhci.h>
 #include <plat/pd.h>
+#include <plat/regs-fb-v4.h>
 
 #include <mach/map.h>
 
@@ -702,6 +705,32 @@ static struct i2c_board_info i2c1_devs[] __initdata = {
 	/* Gyro, To be updated */
 };
 
+/* Frame Buffer */
+static struct s3c_fb_pd_win universal_fb_win0 = {
+	.win_mode = {
+		.left_margin	= 16,
+		.right_margin	= 16,
+		.upper_margin	= 2,
+		.lower_margin	= 28,
+		.hsync_len	= 2,
+		.vsync_len	= 1,
+		.xres		= 480,
+		.yres		= 800,
+		.refresh	= 55,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+};
+
+static struct s3c_fb_platdata universal_lcd_pdata __initdata = {
+	.win[0]		= &universal_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
+			  VIDCON0_CLKSEL_LCD,
+	.vidcon1	= VIDCON1_INV_VCLK | VIDCON1_INV_VDEN
+			  | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
+};
+
 static struct platform_device *universal_devices[] __initdata = {
 	/* Samsung Platform Devices */
 	&s5p_device_fimc0,
@@ -719,10 +748,12 @@ static struct platform_device *universal_devices[] __initdata = {
 	&i2c_gpio12,
 	&universal_gpio_keys,
 	&s5p_device_onenand,
+	&s5p_device_fimd0,
 	&s5p_device_mfc,
 	&s5p_device_mfc_l,
 	&s5p_device_mfc_r,
 	&exynos4_device_pd[PD_MFC],
+	&exynos4_device_pd[PD_LCD0],
 };
 
 static void __init universal_map_io(void)
@@ -751,6 +782,8 @@ static void __init universal_machine_init(void)
 	s3c_i2c5_set_platdata(NULL);
 	i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
 
+	s5p_fimd0_set_platdata(&universal_lcd_pdata);
+
 	universal_touchkey_init();
 	i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs,
 			ARRAY_SIZE(i2c_gpio12_devs));
@@ -758,6 +791,7 @@ static void __init universal_machine_init(void)
 	/* Last */
 	platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices));
 	s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
+	s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
 }
 
 MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
-- 
cgit v1.2.3-18-g5258


From 0d88f9464850ac13c658d9de808ea2e0a31423be Mon Sep 17 00:00:00 2001
From: Marek Szyprowski <m.szyprowski@samsung.com>
Date: Thu, 11 Aug 2011 19:57:28 +0900
Subject: ARM: EXYNOS4: enable frame buffer on Nuri board

This patch adds platform definitions to enable s3c-fb driver.
Framebuffer window with 1280x800x16bpp mode has been defined.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/Kconfig     |  2 ++
 arch/arm/mach-exynos4/mach-nuri.c | 34 ++++++++++++++++++++++++++++++++++
 2 files changed, 36 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index bfdb6959f60..44fce61414f 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -201,6 +201,7 @@ config MACH_NURI
 	bool "Mobile NURI Board"
 	select CPU_EXYNOS4210
 	select S3C_DEV_WDT
+	select S5P_DEV_FIMD0
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
@@ -210,6 +211,7 @@ config MACH_NURI
 	select S5P_DEV_MFC
 	select S5P_DEV_USB_EHCI
 	select EXYNOS4_DEV_PD
+	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_I2C1
 	select EXYNOS4_SETUP_I2C3
 	select EXYNOS4_SETUP_I2C5
diff --git a/arch/arm/mach-exynos4/mach-nuri.c b/arch/arm/mach-exynos4/mach-nuri.c
index 43be71b799c..bbd13f45415 100644
--- a/arch/arm/mach-exynos4/mach-nuri.c
+++ b/arch/arm/mach-exynos4/mach-nuri.c
@@ -32,10 +32,12 @@
 #include <asm/mach-types.h>
 
 #include <plat/adc.h>
+#include <plat/regs-fb-v4.h>
 #include <plat/regs-serial.h>
 #include <plat/exynos4.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
+#include <plat/fb.h>
 #include <plat/sdhci.h>
 #include <plat/ehci.h>
 #include <plat/clock.h>
@@ -199,6 +201,33 @@ static struct platform_device nuri_gpio_keys = {
 	},
 };
 
+/* Frame Buffer */
+static struct s3c_fb_pd_win nuri_fb_win0 = {
+	.win_mode = {
+		.left_margin	= 64,
+		.right_margin	= 16,
+		.upper_margin	= 64,
+		.lower_margin	= 1,
+		.hsync_len	= 48,
+		.vsync_len	= 3,
+		.xres		= 1280,
+		.yres		= 800,
+		.refresh	= 60,
+	},
+	.max_bpp	= 24,
+	.default_bpp	= 16,
+	.virtual_x	= 1280,
+	.virtual_y	= 800,
+};
+
+static struct s3c_fb_platdata nuri_fb_pdata __initdata = {
+	.win[0]		= &nuri_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
+			  VIDCON0_CLKSEL_LCD,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
+};
+
 static void nuri_lcd_power_on(struct plat_lcd_data *pd, unsigned int power)
 {
 	int gpio = EXYNOS4_GPE1(5);
@@ -1092,6 +1121,7 @@ static struct platform_device *nuri_devices[] __initdata = {
 	/* Samsung Platform Devices */
 	&s3c_device_i2c5, /* PMIC should initialize first */
 	&emmc_fixed_voltage,
+	&s5p_device_fimd0,
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc2,
 	&s3c_device_hsmmc3,
@@ -1106,6 +1136,7 @@ static struct platform_device *nuri_devices[] __initdata = {
 	&s5p_device_mfc_l,
 	&s5p_device_mfc_r,
 	&exynos4_device_pd[PD_MFC],
+	&exynos4_device_pd[PD_LCD0],
 
 	/* NURI Devices */
 	&nuri_gpio_keys,
@@ -1142,12 +1173,15 @@ static void __init nuri_machine_init(void)
 	i2c9_devs[I2C9_MAX17042].irq = gpio_to_irq(EXYNOS4_GPX2(3));
 	i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs));
 
+	s5p_fimd0_set_platdata(&nuri_fb_pdata);
+
 	nuri_ehci_init();
 	clk_xusbxti.rate = 24000000;
 
 	/* Last */
 	platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices));
 	s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
+	s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
 }
 
 MACHINE_START(NURI, "NURI")
-- 
cgit v1.2.3-18-g5258


From 41c308f40a813403b94f3a3446aba2e5cc6bd6b4 Mon Sep 17 00:00:00 2001
From: Chanwoo Choi <cw00.choi@samsung.com>
Date: Fri, 12 Aug 2011 17:14:56 +0900
Subject: ARM: EXYNOS4: Update config file of NURI to enable RTC

This patch update config file of NURI board to enable RTC

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/Kconfig | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index 44fce61414f..2542cebd591 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -201,6 +201,7 @@ config MACH_NURI
 	bool "Mobile NURI Board"
 	select CPU_EXYNOS4210
 	select S3C_DEV_WDT
+	select S3C_DEV_RTC
 	select S5P_DEV_FIMD0
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC2
-- 
cgit v1.2.3-18-g5258


From 95727e1fa18432eafcd0e9ba50c58f40d3ae0cea Mon Sep 17 00:00:00 2001
From: Sachin Kamat <sachin.kamat@linaro.org>
Date: Fri, 12 Aug 2011 18:21:27 +0900
Subject: ARM: EXYNOS4: Enable MFC on Samsung SMDKV310

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/Kconfig         |  1 +
 arch/arm/mach-exynos4/mach-smdkv310.c | 11 +++++++++++
 2 files changed, 12 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index 2542cebd591..95ba0cc9f6e 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -139,6 +139,7 @@ config MACH_SMDKV310
 	select S3C_DEV_RTC
 	select S3C_DEV_WDT
 	select S3C_DEV_I2C1
+	select S5P_DEV_MFC
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c
index ea414955686..5f62b2b3310 100644
--- a/arch/arm/mach-exynos4/mach-smdkv310.c
+++ b/arch/arm/mach-exynos4/mach-smdkv310.c
@@ -32,6 +32,7 @@
 #include <plat/pd.h>
 #include <plat/gpio-cfg.h>
 #include <plat/backlight.h>
+#include <plat/mfc.h>
 
 #include <mach/map.h>
 
@@ -177,6 +178,9 @@ static struct platform_device *smdkv310_devices[] __initdata = {
 	&exynos4_device_ac97,
 	&exynos4_device_i2s0,
 	&samsung_device_keypad,
+	&s5p_device_mfc,
+	&s5p_device_mfc_l,
+	&s5p_device_mfc_r,
 	&exynos4_device_pd[PD_MFC],
 	&exynos4_device_pd[PD_G3D],
 	&exynos4_device_pd[PD_LCD0],
@@ -233,6 +237,11 @@ static void __init smdkv310_map_io(void)
 	s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs));
 }
 
+static void __init smdkv310_reserve(void)
+{
+	s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
+}
+
 static void __init smdkv310_machine_init(void)
 {
 	s3c_i2c1_set_platdata(NULL);
@@ -250,6 +259,7 @@ static void __init smdkv310_machine_init(void)
 	samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
 
 	platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
+	s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
 }
 
 MACHINE_START(SMDKV310, "SMDKV310")
@@ -260,4 +270,5 @@ MACHINE_START(SMDKV310, "SMDKV310")
 	.map_io		= smdkv310_map_io,
 	.init_machine	= smdkv310_machine_init,
 	.timer		= &exynos4_timer,
+	.reserve	= &smdkv310_reserve,
 MACHINE_END
-- 
cgit v1.2.3-18-g5258


From 1abd328ee5e2e870fa035e7882e7a278127b4ccf Mon Sep 17 00:00:00 2001
From: Tushar Behera <tushar.behera@linaro.org>
Date: Mon, 19 Sep 2011 20:09:01 +0900
Subject: ARM: EXYNOS4: convert boot_params to atag_offset

Based on "ARM: introduce atag_offset to replace boot_params"
by Nicolas Pitre (2bb9839e312ed55a6d5824ffa6077ce3d7d63b1e).

Since boot_params variable is deleted from machine_desc, the variable
is modified in the newer board files.

Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
[kgene.kim@samsung.com: added fixing for smdkv310]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/mach-origen.c   | 2 +-
 arch/arm/mach-exynos4/mach-smdkv310.c | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c
index ed59f86001a..b5f6f38557c 100644
--- a/arch/arm/mach-exynos4/mach-origen.c
+++ b/arch/arm/mach-exynos4/mach-origen.c
@@ -100,7 +100,7 @@ static void __init origen_machine_init(void)
 
 MACHINE_START(ORIGEN, "ORIGEN")
 	/* Maintainer: JeongHyeon Kim <jhkim@insignal.co.kr> */
-	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= origen_map_io,
 	.init_machine	= origen_machine_init,
diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c
index a16eb569a3e..2c1a076c6a7 100644
--- a/arch/arm/mach-exynos4/mach-smdkv310.c
+++ b/arch/arm/mach-exynos4/mach-smdkv310.c
@@ -324,7 +324,7 @@ static void __init smdkv310_machine_init(void)
 MACHINE_START(SMDKV310, "SMDKV310")
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
 	/* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
-	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdkv310_map_io,
 	.init_machine	= smdkv310_machine_init,
@@ -333,7 +333,7 @@ MACHINE_END
 
 MACHINE_START(SMDKC210, "SMDKC210")
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdkv310_map_io,
 	.init_machine	= smdkv310_machine_init,
-- 
cgit v1.2.3-18-g5258


From 637c2afa57ec9cd0ddc8879ea0cda4d8835ba71d Mon Sep 17 00:00:00 2001
From: Changhwan Youn <chaos.youn@samsung.com>
Date: Tue, 4 Oct 2011 17:02:58 +0900
Subject: ARM: EXYNOS4: Add support PPI in external GIC

To support PPI in external GIC of EXYNOS4 SoCs,
gic_arch_extn.irq_eoi, irq_unmask and irq_mask are
fixed. This patch is necessary because external GIC of EXYNOS4
cannot support register banking.

Signed-off-by: Changhwan Youn <chaos.youn@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/cpu.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c
index 02ec52a9927..35fe8421bc3 100644
--- a/arch/arm/mach-exynos4/cpu.c
+++ b/arch/arm/mach-exynos4/cpu.c
@@ -198,20 +198,25 @@ void __init exynos4_init_clocks(int xtal)
 	exynos4_setup_clocks();
 }
 
-static void exynos4_gic_irq_eoi(struct irq_data *d)
+static void exynos4_gic_irq_fix_base(struct irq_data *d)
 {
 	struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
 
 	gic_data->cpu_base = S5P_VA_GIC_CPU +
 			    (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
+
+	gic_data->dist_base = S5P_VA_GIC_DIST +
+			    (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
 }
 
 void __init exynos4_init_irq(void)
 {
 	int irq;
 
-	gic_init(0, IRQ_SPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
-	gic_arch_extn.irq_eoi = exynos4_gic_irq_eoi;
+	gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
+	gic_arch_extn.irq_eoi = exynos4_gic_irq_fix_base;
+	gic_arch_extn.irq_unmask = exynos4_gic_irq_fix_base;
+	gic_arch_extn.irq_mask = exynos4_gic_irq_fix_base;
 
 	for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
 
-- 
cgit v1.2.3-18-g5258


From 3a062281129229b50e06547af3110f8eccd2f4e4 Mon Sep 17 00:00:00 2001
From: Changhwan Youn <chaos.youn@samsung.com>
Date: Tue, 4 Oct 2011 17:02:58 +0900
Subject: ARM: EXYNOS4: Add support MCT PPI for EXYNOS4212

This patch implements clock event timer using MCT PPI
and make EXYNOS4212 use MCT PPI instead of MCT SPI.

Signed-off-by: Changhwan Youn <chaos.youn@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/include/mach/entry-macro.S |  6 +++
 arch/arm/mach-exynos4/include/mach/irqs.h        |  2 +
 arch/arm/mach-exynos4/mct.c                      | 55 +++++++++++++++++++-----
 3 files changed, 53 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/include/mach/entry-macro.S b/arch/arm/mach-exynos4/include/mach/entry-macro.S
index d7a1e281ce7..61393dcf555 100644
--- a/arch/arm/mach-exynos4/include/mach/entry-macro.S
+++ b/arch/arm/mach-exynos4/include/mach/entry-macro.S
@@ -80,4 +80,10 @@
 		/* As above, this assumes that irqstat and base are preserved.. */
 
 		.macro test_for_ltirq, irqnr, irqstat, base, tmp
+		bic	\irqnr, \irqstat, #0x1c00
+		mov	\tmp, #0
+		cmp	\irqnr, #28
+		moveq	\tmp, #1
+		streq	\irqstat, [\base, #GIC_CPU_EOI]
+		cmp	\tmp, #0
 		.endm
diff --git a/arch/arm/mach-exynos4/include/mach/irqs.h b/arch/arm/mach-exynos4/include/mach/irqs.h
index f8952f8f375..2d3f6bcd9bc 100644
--- a/arch/arm/mach-exynos4/include/mach/irqs.h
+++ b/arch/arm/mach-exynos4/include/mach/irqs.h
@@ -19,6 +19,8 @@
 
 #define IRQ_PPI(x)		S5P_IRQ(x+16)
 
+#define IRQ_MCT_LOCALTIMER	IRQ_PPI(12)
+
 /* SPI: Shared Peripheral Interrupt */
 
 #define IRQ_SPI(x)		S5P_IRQ(x+32)
diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c
index ddd86864fb8..f43f3faa649 100644
--- a/arch/arm/mach-exynos4/mct.c
+++ b/arch/arm/mach-exynos4/mct.c
@@ -20,12 +20,23 @@
 #include <linux/delay.h>
 #include <linux/percpu.h>
 
+#include <asm/hardware/gic.h>
+
+#include <plat/cpu.h>
+
 #include <mach/map.h>
+#include <mach/irqs.h>
 #include <mach/regs-mct.h>
 #include <asm/mach/time.h>
 
+enum {
+	MCT_INT_SPI,
+	MCT_INT_PPI
+};
+
 static unsigned long clk_cnt_per_tick;
 static unsigned long clk_rate;
+static unsigned int mct_int_type;
 
 struct mct_clock_event_device {
 	struct clock_event_device *evt;
@@ -321,9 +332,8 @@ static inline void exynos4_tick_set_mode(enum clock_event_mode mode,
 	}
 }
 
-static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id)
+static inline int exynos4_mct_tick_clear(struct mct_clock_event_device *mevt)
 {
-	struct mct_clock_event_device *mevt = dev_id;
 	struct clock_event_device *evt = mevt->evt;
 
 	/*
@@ -335,7 +345,20 @@ static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id)
 		exynos4_mct_tick_stop(mevt);
 
 	/* Clear the MCT tick interrupt */
-	exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
+	if (__raw_readl(mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) {
+		exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
+		return 1;
+	} else {
+		return 0;
+	}
+}
+
+static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id)
+{
+	struct mct_clock_event_device *mevt = dev_id;
+	struct clock_event_device *evt = mevt->evt;
+
+	exynos4_mct_tick_clear(mevt);
 
 	evt->event_handler(evt);
 
@@ -384,13 +407,17 @@ static void exynos4_mct_tick_init(struct clock_event_device *evt)
 
 	exynos4_mct_write(0x1, mct_tick[cpu].base + MCT_L_TCNTB_OFFSET);
 
-	if (cpu == 0) {
-		mct_tick0_event_irq.dev_id = &mct_tick[cpu];
-		setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq);
+	if (mct_int_type == MCT_INT_SPI) {
+		if (cpu == 0) {
+			mct_tick0_event_irq.dev_id = &mct_tick[cpu];
+			setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq);
+		} else {
+			mct_tick1_event_irq.dev_id = &mct_tick[cpu];
+			setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq);
+			irq_set_affinity(IRQ_MCT_L1, cpumask_of(1));
+		}
 	} else {
-		mct_tick1_event_irq.dev_id = &mct_tick[cpu];
-		setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq);
-		irq_set_affinity(IRQ_MCT_L1, cpumask_of(1));
+		gic_enable_ppi(IRQ_MCT_LOCALTIMER);
 	}
 }
 
@@ -404,7 +431,10 @@ int __cpuinit local_timer_setup(struct clock_event_device *evt)
 
 int local_timer_ack(void)
 {
-	return 0;
+	unsigned int cpu = smp_processor_id();
+	struct mct_clock_event_device *mevt = &mct_tick[cpu];
+
+	return exynos4_mct_tick_clear(mevt);
 }
 
 #endif /* CONFIG_LOCAL_TIMERS */
@@ -419,6 +449,11 @@ static void __init exynos4_timer_resources(void)
 
 static void __init exynos4_timer_init(void)
 {
+	if (soc_is_exynos4210())
+		mct_int_type = MCT_INT_SPI;
+	else
+		mct_int_type = MCT_INT_PPI;
+
 	exynos4_timer_resources();
 	exynos4_clocksource_init();
 	exynos4_clockevent_init();
-- 
cgit v1.2.3-18-g5258


From e6a275a8f92392f27e3accd6182d52627ef37258 Mon Sep 17 00:00:00 2001
From: Changhwan Youn <chaos.youn@samsung.com>
Date: Tue, 4 Oct 2011 17:08:56 +0900
Subject: ARM: EXYNOS4: Add support new EXYNOS4412 SoC

This patch adds Samsung EXYNOS4412 SoC support.
The EXYNOS4412 integrates a ARM Cortex A9 quad-core.

Signed-off-by: Changhwan Youn <chaos.youn@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/Kconfig            | 5 +++++
 arch/arm/mach-exynos4/cpu.c              | 4 ++--
 arch/arm/plat-s5p/cpu.c                  | 9 +++++++++
 arch/arm/plat-samsung/include/plat/cpu.h | 8 ++++++++
 4 files changed, 24 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index c595bb03f41..c255d6f7ec5 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -20,6 +20,11 @@ config SOC_EXYNOS4212
 	help
 	  Enable EXYNOS4212 SoC support
 
+config SOC_EXYNOS4412
+	bool
+	help
+	  Enable EXYNOS4412 SoC support
+
 config EXYNOS4_MCT
 	bool
 	default y
diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c
index 35fe8421bc3..940bc12f754 100644
--- a/arch/arm/mach-exynos4/cpu.c
+++ b/arch/arm/mach-exynos4/cpu.c
@@ -191,7 +191,7 @@ void __init exynos4_init_clocks(int xtal)
 
 	if (soc_is_exynos4210())
 		exynos4210_register_clocks();
-	else if (soc_is_exynos4212())
+	else if (soc_is_exynos4212() || soc_is_exynos4412())
 		exynos4212_register_clocks();
 
 	exynos4_register_clocks();
@@ -255,7 +255,7 @@ static int __init exynos4_l2x0_cache_init(void)
 
 	if (soc_is_exynos4210())
 		__raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
-	else if (soc_is_exynos4212())
+	else if (soc_is_exynos4212() || soc_is_exynos4412())
 		__raw_writel(0x120, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
 
 	/* L2X0 Prefetch Control */
diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c
index 909507bae2f..7b0a28f73a6 100644
--- a/arch/arm/plat-s5p/cpu.c
+++ b/arch/arm/plat-s5p/cpu.c
@@ -34,6 +34,7 @@ static const char name_s5pc100[] = "S5PC100";
 static const char name_s5pv210[] = "S5PV210/S5PC110";
 static const char name_exynos4210[] = "EXYNOS4210";
 static const char name_exynos4212[] = "EXYNOS4212";
+static const char name_exynos4412[] = "EXYNOS4412";
 
 static struct cpu_table cpu_ids[] __initdata = {
 	{
@@ -84,6 +85,14 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.init_uarts	= exynos4_init_uarts,
 		.init		= exynos4_init,
 		.name		= name_exynos4212,
+	}, {
+		.idcode		= EXYNOS4412_CPU_ID,
+		.idmask		= EXYNOS4_CPU_MASK,
+		.map_io		= exynos4_map_io,
+		.init_clocks	= exynos4_init_clocks,
+		.init_uarts	= exynos4_init_uarts,
+		.init		= exynos4_init,
+		.name		= name_exynos4412,
 	},
 };
 
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 1bbbbb420be..54f370f0fc0 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -40,6 +40,7 @@ extern unsigned long samsung_cpu_id;
 
 #define EXYNOS4210_CPU_ID	0x43210000
 #define EXYNOS4212_CPU_ID	0x43220000
+#define EXYNOS4412_CPU_ID	0xE4412200
 #define EXYNOS4_CPU_MASK	0xFFFE0000
 
 #define IS_SAMSUNG_CPU(name, id, mask)		\
@@ -56,6 +57,7 @@ IS_SAMSUNG_CPU(s5pc100, S5PC100_CPU_ID, S5PC100_CPU_MASK)
 IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK)
 IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
 IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
 
 #if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
     defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \
@@ -108,6 +110,12 @@ IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
 # define soc_is_exynos4212()	0
 #endif
 
+#if defined(CONFIG_SOC_EXYNOS4412)
+# define soc_is_exynos4412()	is_samsung_exynos4412()
+#else
+# define soc_is_exynos4412()	0
+#endif
+
 #define EXYNOS4210_REV_0	(0x0)
 #define EXYNOS4210_REV_1_0	(0x10)
 #define EXYNOS4210_REV_1_1	(0x11)
-- 
cgit v1.2.3-18-g5258


From b88b1cc72e2bbb55c56f2df55b5ad59a18ad1464 Mon Sep 17 00:00:00 2001
From: Changhwan Youn <chaos.youn@samsung.com>
Date: Tue, 4 Oct 2011 17:08:56 +0900
Subject: ARM: EXYNOS4: Add support clock for EXYNOS4412

This patch makes EXYNOS4412 use same clock code for
EXYNOS4212 because the clock hierarchy of both SoCs
are same.

Signed-off-by: Changhwan Youn <chaos.youn@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/clock.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos4/clock.c
index f26aea3e1bb..2a037cc221d 100644
--- a/arch/arm/mach-exynos4/clock.c
+++ b/arch/arm/mach-exynos4/clock.c
@@ -1149,7 +1149,7 @@ static unsigned long exynos4_fout_apll_get_rate(struct clk *clk)
 	if (soc_is_exynos4210())
 		return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0),
 					pll_4508);
-	else if (soc_is_exynos4212())
+	else if (soc_is_exynos4212() || soc_is_exynos4412())
 		return s5p_get_pll35xx(xtal_rate, __raw_readl(S5P_APLL_CON0));
 	else
 		return 0;
@@ -1200,7 +1200,7 @@ void __init_or_cpufreq exynos4_setup_clocks(void)
 		vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
 		vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
 					__raw_readl(S5P_VPLL_CON1), pll_4650c);
-	} else if (soc_is_exynos4212()) {
+	} else if (soc_is_exynos4212() || soc_is_exynos4412()) {
 		apll = s5p_get_pll35xx(xtal, __raw_readl(S5P_APLL_CON0));
 		mpll = s5p_get_pll35xx(xtal, __raw_readl(S5P_MPLL_CON0));
 		epll = s5p_get_pll36xx(xtal, __raw_readl(S5P_EPLL_CON0),
-- 
cgit v1.2.3-18-g5258


From 90a454b4c5ef16ec71797b3dcaf454e604c786a3 Mon Sep 17 00:00:00 2001
From: Changhwan Youn <chaos.youn@samsung.com>
Date: Tue, 4 Oct 2011 17:08:57 +0900
Subject: ARM: EXYNOS4: Add functions for gic interrupt handling

This patch adds two functions for gic interrupt handling.
1. Add interrupt handling of 4 cores.
2. Dynamically set gic bank offset according to the type of soc.
   Gic bank offset of EXYNOS4412 is 0x4000 while the offset of
   EXYNOS4210 and EXYNOS4212 is 0x8000.

This patch is necessary because EXYNOS4 socs cannot support
GIC register banking as described in commit aab74d3e75364.

Signed-off-by: Changhwan Youn <chaos.youn@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/cpu.c                      |  8 ++++++--
 arch/arm/mach-exynos4/include/mach/entry-macro.S | 23 ++++++++++++++++++-----
 arch/arm/mach-exynos4/include/mach/map.h         |  1 -
 arch/arm/mach-exynos4/platsmp.c                  |  5 +++--
 4 files changed, 27 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c
index 940bc12f754..a348434f17b 100644
--- a/arch/arm/mach-exynos4/cpu.c
+++ b/arch/arm/mach-exynos4/cpu.c
@@ -32,6 +32,8 @@
 #include <mach/regs-irq.h>
 #include <mach/regs-pmu.h>
 
+unsigned int gic_bank_offset __read_mostly;
+
 extern int combiner_init(unsigned int combiner_nr, void __iomem *base,
 			 unsigned int irq_start);
 extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq);
@@ -203,16 +205,18 @@ static void exynos4_gic_irq_fix_base(struct irq_data *d)
 	struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
 
 	gic_data->cpu_base = S5P_VA_GIC_CPU +
-			    (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
+			    (gic_bank_offset * smp_processor_id());
 
 	gic_data->dist_base = S5P_VA_GIC_DIST +
-			    (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
+			    (gic_bank_offset * smp_processor_id());
 }
 
 void __init exynos4_init_irq(void)
 {
 	int irq;
 
+	gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
+
 	gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
 	gic_arch_extn.irq_eoi = exynos4_gic_irq_fix_base;
 	gic_arch_extn.irq_unmask = exynos4_gic_irq_fix_base;
diff --git a/arch/arm/mach-exynos4/include/mach/entry-macro.S b/arch/arm/mach-exynos4/include/mach/entry-macro.S
index 61393dcf555..4c9adbd87ea 100644
--- a/arch/arm/mach-exynos4/include/mach/entry-macro.S
+++ b/arch/arm/mach-exynos4/include/mach/entry-macro.S
@@ -17,12 +17,25 @@
 		.endm
 
 		.macro  get_irqnr_preamble, base, tmp
-		ldr	\base, =gic_cpu_base_addr
+		mov	\tmp, #0
+
+		mrc	p15, 0, \base, c0, c0, 5
+		and	\base, \base, #3
+		cmp	\base, #0
+		beq	1f
+
+		ldr	\tmp, =gic_bank_offset
+		ldr	\tmp, [\tmp]
+		cmp	\base, #1
+		beq	1f
+
+		cmp	\base, #2
+		addeq	\tmp, \tmp, \tmp
+		addne	\tmp, \tmp, \tmp, LSL #1
+
+1:		ldr	\base, =gic_cpu_base_addr
 		ldr	\base, [\base]
-		mrc     p15, 0, \tmp, c0, c0, 5
-		and     \tmp, \tmp, #3
-		cmp     \tmp, #1
-		addeq   \base, \base, #EXYNOS4_GIC_BANK_OFFSET
+		add	\base, \base, \tmp
 		.endm
 
 		.macro  arch_ret_to_user, tmp1, tmp2
diff --git a/arch/arm/mach-exynos4/include/mach/map.h b/arch/arm/mach-exynos4/include/mach/map.h
index 7073ac73085..9f97eb8499e 100644
--- a/arch/arm/mach-exynos4/include/mach/map.h
+++ b/arch/arm/mach-exynos4/include/mach/map.h
@@ -62,7 +62,6 @@
 
 #define EXYNOS4_PA_GIC_CPU		0x10480000
 #define EXYNOS4_PA_GIC_DIST		0x10490000
-#define EXYNOS4_GIC_BANK_OFFSET		0x8000
 
 #define EXYNOS4_PA_COREPERI		0x10500000
 #define EXYNOS4_PA_TWD			0x10500600
diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos4/platsmp.c
index a3346e36d0a..d5f0f299ba0 100644
--- a/arch/arm/mach-exynos4/platsmp.c
+++ b/arch/arm/mach-exynos4/platsmp.c
@@ -32,6 +32,7 @@
 
 #include <plat/cpu.h>
 
+extern unsigned int gic_bank_offset;
 extern void exynos4_secondary_startup(void);
 
 #define CPU1_BOOT_REG		(samsung_rev() == EXYNOS4210_REV_1_1 ? \
@@ -67,9 +68,9 @@ static DEFINE_SPINLOCK(boot_lock);
 static void __cpuinit exynos4_gic_secondary_init(void)
 {
 	void __iomem *dist_base = S5P_VA_GIC_DIST +
-				 (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
+				(gic_bank_offset * smp_processor_id());
 	void __iomem *cpu_base = S5P_VA_GIC_CPU +
-				(EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
+				(gic_bank_offset * smp_processor_id());
 	int i;
 
 	/*
-- 
cgit v1.2.3-18-g5258


From c8987470a3a3e56295ee8c9130f5298e807bf4f7 Mon Sep 17 00:00:00 2001
From: Changhwan Youn <chaos.youn@samsung.com>
Date: Tue, 4 Oct 2011 17:09:26 +0900
Subject: ARM: EXYNOS4: Add MCT support for EXYNOS4412

Current MCT implementation only provide 2 event timers,
thus cannot support EXYNOS4412 which has 4 CPU cores.
This patch fixes MCT implementation to support SoCs
with 4 cores.

Signed-off-by: Changhwan Youn <chaos.youn@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/include/mach/regs-mct.h |   5 +-
 arch/arm/mach-exynos4/mct.c                   | 113 ++++++++++++--------------
 2 files changed, 56 insertions(+), 62 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/include/mach/regs-mct.h b/arch/arm/mach-exynos4/include/mach/regs-mct.h
index ca9c8434b02..80dd02ad6d6 100644
--- a/arch/arm/mach-exynos4/include/mach/regs-mct.h
+++ b/arch/arm/mach-exynos4/include/mach/regs-mct.h
@@ -31,8 +31,9 @@
 #define EXYNOS4_MCT_G_INT_ENB		EXYNOS4_MCTREG(0x248)
 #define EXYNOS4_MCT_G_WSTAT		EXYNOS4_MCTREG(0x24C)
 
-#define EXYNOS4_MCT_L0_BASE		EXYNOS4_MCTREG(0x300)
-#define EXYNOS4_MCT_L1_BASE		EXYNOS4_MCTREG(0x400)
+#define _EXYNOS4_MCT_L_BASE		EXYNOS4_MCTREG(0x300)
+#define EXYNOS4_MCT_L_BASE(x)		(_EXYNOS4_MCT_L_BASE + (0x100 * x))
+#define EXYNOS4_MCT_L_MASK		(0xffffff00)
 
 #define MCT_L_TCNTB_OFFSET		(0x00)
 #define MCT_L_ICNTB_OFFSET		(0x08)
diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c
index f43f3faa649..eb182f29f48 100644
--- a/arch/arm/mach-exynos4/mct.c
+++ b/arch/arm/mach-exynos4/mct.c
@@ -41,9 +41,10 @@ static unsigned int mct_int_type;
 struct mct_clock_event_device {
 	struct clock_event_device *evt;
 	void __iomem *base;
+	char name[10];
 };
 
-struct mct_clock_event_device mct_tick[2];
+struct mct_clock_event_device mct_tick[NR_CPUS];
 
 static void exynos4_mct_write(unsigned int value, void *addr)
 {
@@ -53,57 +54,53 @@ static void exynos4_mct_write(unsigned int value, void *addr)
 
 	__raw_writel(value, addr);
 
-	switch ((u32) addr) {
-	case (u32) EXYNOS4_MCT_G_TCON:
-		stat_addr = EXYNOS4_MCT_G_WSTAT;
-		mask = 1 << 16;		/* G_TCON write status */
-		break;
-	case (u32) EXYNOS4_MCT_G_COMP0_L:
-		stat_addr = EXYNOS4_MCT_G_WSTAT;
-		mask = 1 << 0;		/* G_COMP0_L write status */
-		break;
-	case (u32) EXYNOS4_MCT_G_COMP0_U:
-		stat_addr = EXYNOS4_MCT_G_WSTAT;
-		mask = 1 << 1;		/* G_COMP0_U write status */
-		break;
-	case (u32) EXYNOS4_MCT_G_COMP0_ADD_INCR:
-		stat_addr = EXYNOS4_MCT_G_WSTAT;
-		mask = 1 << 2;		/* G_COMP0_ADD_INCR write status */
-		break;
-	case (u32) EXYNOS4_MCT_G_CNT_L:
-		stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
-		mask = 1 << 0;		/* G_CNT_L write status */
-		break;
-	case (u32) EXYNOS4_MCT_G_CNT_U:
-		stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
-		mask = 1 << 1;		/* G_CNT_U write status */
-		break;
-	case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_TCON_OFFSET):
-		stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET;
-		mask = 1 << 3;		/* L0_TCON write status */
-		break;
-	case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_TCON_OFFSET):
-		stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET;
-		mask = 1 << 3;		/* L1_TCON write status */
-		break;
-	case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_TCNTB_OFFSET):
-		stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET;
-		mask = 1 << 0;		/* L0_TCNTB write status */
-		break;
-	case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_TCNTB_OFFSET):
-		stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET;
-		mask = 1 << 0;		/* L1_TCNTB write status */
-		break;
-	case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_ICNTB_OFFSET):
-		stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET;
-		mask = 1 << 1;		/* L0_ICNTB write status */
-		break;
-	case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_ICNTB_OFFSET):
-		stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET;
-		mask = 1 << 1;		/* L1_ICNTB write status */
-		break;
-	default:
-		return;
+	if (likely(addr >= EXYNOS4_MCT_L_BASE(0))) {
+		u32 base = (u32) addr & EXYNOS4_MCT_L_MASK;
+		switch ((u32) addr & ~EXYNOS4_MCT_L_MASK) {
+		case (u32) MCT_L_TCON_OFFSET:
+			stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
+			mask = 1 << 3;		/* L_TCON write status */
+			break;
+		case (u32) MCT_L_ICNTB_OFFSET:
+			stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
+			mask = 1 << 1;		/* L_ICNTB write status */
+			break;
+		case (u32) MCT_L_TCNTB_OFFSET:
+			stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
+			mask = 1 << 0;		/* L_TCNTB write status */
+			break;
+		default:
+			return;
+		}
+	} else {
+		switch ((u32) addr) {
+		case (u32) EXYNOS4_MCT_G_TCON:
+			stat_addr = EXYNOS4_MCT_G_WSTAT;
+			mask = 1 << 16;		/* G_TCON write status */
+			break;
+		case (u32) EXYNOS4_MCT_G_COMP0_L:
+			stat_addr = EXYNOS4_MCT_G_WSTAT;
+			mask = 1 << 0;		/* G_COMP0_L write status */
+			break;
+		case (u32) EXYNOS4_MCT_G_COMP0_U:
+			stat_addr = EXYNOS4_MCT_G_WSTAT;
+			mask = 1 << 1;		/* G_COMP0_U write status */
+			break;
+		case (u32) EXYNOS4_MCT_G_COMP0_ADD_INCR:
+			stat_addr = EXYNOS4_MCT_G_WSTAT;
+			mask = 1 << 2;		/* G_COMP0_ADD_INCR w status */
+			break;
+		case (u32) EXYNOS4_MCT_G_CNT_L:
+			stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
+			mask = 1 << 0;		/* G_CNT_L write status */
+			break;
+		case (u32) EXYNOS4_MCT_G_CNT_U:
+			stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
+			mask = 1 << 1;		/* G_CNT_U write status */
+			break;
+		default:
+			return;
+		}
 	}
 
 	/* Wait maximum 1 ms until written values are applied */
@@ -332,7 +329,7 @@ static inline void exynos4_tick_set_mode(enum clock_event_mode mode,
 	}
 }
 
-static inline int exynos4_mct_tick_clear(struct mct_clock_event_device *mevt)
+static int exynos4_mct_tick_clear(struct mct_clock_event_device *mevt)
 {
 	struct clock_event_device *evt = mevt->evt;
 
@@ -383,14 +380,10 @@ static void exynos4_mct_tick_init(struct clock_event_device *evt)
 
 	mct_tick[cpu].evt = evt;
 
-	if (cpu == 0) {
-		mct_tick[cpu].base = EXYNOS4_MCT_L0_BASE;
-		evt->name = "mct_tick0";
-	} else {
-		mct_tick[cpu].base = EXYNOS4_MCT_L1_BASE;
-		evt->name = "mct_tick1";
-	}
+	mct_tick[cpu].base = EXYNOS4_MCT_L_BASE(cpu);
+	sprintf(mct_tick[cpu].name, "mct_tick%d", cpu);
 
+	evt->name = mct_tick[cpu].name;
 	evt->cpumask = cpumask_of(cpu);
 	evt->set_next_event = exynos4_tick_set_next_event;
 	evt->set_mode = exynos4_tick_set_mode;
-- 
cgit v1.2.3-18-g5258


From 31451afd2480caf3ae15da56cf9fc3cb3fb821cb Mon Sep 17 00:00:00 2001
From: Changhwan Youn <chaos.youn@samsung.com>
Date: Tue, 4 Oct 2011 17:09:26 +0900
Subject: ARM: EXYNOS4: Add support SMDK4412 Board

SMDK4412 board is same as a SMDK4212 board except that
it has EXYNOS4412 SoC, thus it can share machine code
with SMDK4212.

This patch renames mach-smdk4212.c to mach-smdk4x12.c
to support both SMDK4212 and SMDK4412 board with one
machine file.

Signed-off-by: Changhwan Youn <chaos.youn@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/Kconfig         |   9 +
 arch/arm/mach-exynos4/Makefile        |   3 +-
 arch/arm/mach-exynos4/mach-smdk4212.c | 292 --------------------------------
 arch/arm/mach-exynos4/mach-smdk4x12.c | 302 ++++++++++++++++++++++++++++++++++
 4 files changed, 313 insertions(+), 293 deletions(-)
 delete mode 100644 arch/arm/mach-exynos4/mach-smdk4212.c
 create mode 100644 arch/arm/mach-exynos4/mach-smdk4x12.c

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index c255d6f7ec5..fec23859388 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -248,6 +248,15 @@ config MACH_SMDK4212
 	help
 	  Machine support for Samsung SMDK4212
 
+comment "EXYNOS4412 Boards"
+
+config MACH_SMDK4412
+	bool "SMDK4412"
+	select SOC_EXYNOS4412
+	select MACH_SMDK4212
+	help
+	  Machine support for Samsung SMDK4412
+
 endmenu
 
 comment "Configuration for HSMMC bus width"
diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile
index e19cd12d264..c9b2e1f97e4 100644
--- a/arch/arm/mach-exynos4/Makefile
+++ b/arch/arm/mach-exynos4/Makefile
@@ -34,7 +34,8 @@ obj-$(CONFIG_MACH_UNIVERSAL_C210)	+= mach-universal_c210.o
 obj-$(CONFIG_MACH_NURI)			+= mach-nuri.o
 obj-$(CONFIG_MACH_ORIGEN)		+= mach-origen.o
 
-obj-$(CONFIG_MACH_SMDK4212)		+= mach-smdk4212.o
+obj-$(CONFIG_MACH_SMDK4212)		+= mach-smdk4x12.o
+obj-$(CONFIG_MACH_SMDK4412)		+= mach-smdk4x12.o
 
 # device support
 
diff --git a/arch/arm/mach-exynos4/mach-smdk4212.c b/arch/arm/mach-exynos4/mach-smdk4212.c
deleted file mode 100644
index 3479a933a6d..00000000000
--- a/arch/arm/mach-exynos4/mach-smdk4212.c
+++ /dev/null
@@ -1,292 +0,0 @@
-/*
- * linux/arch/arm/mach-exynos4/mach-smdk4212.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/mfd/max8997.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/pwm_backlight.h>
-#include <linux/regulator/machine.h>
-#include <linux/serial_core.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <plat/backlight.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/exynos4.h>
-#include <plat/gpio-cfg.h>
-#include <plat/iic.h>
-#include <plat/keypad.h>
-#include <plat/regs-serial.h>
-#include <plat/sdhci.h>
-
-#include <mach/map.h>
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define SMDK4212_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
-				 S3C2410_UCON_RXILEVEL |	\
-				 S3C2410_UCON_TXIRQMODE |	\
-				 S3C2410_UCON_RXIRQMODE |	\
-				 S3C2410_UCON_RXFIFO_TOI |	\
-				 S3C2443_UCON_RXERR_IRQEN)
-
-#define SMDK4212_ULCON_DEFAULT	S3C2410_LCON_CS8
-
-#define SMDK4212_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
-				 S5PV210_UFCON_TXTRIG4 |	\
-				 S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg smdk4212_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport		= 0,
-		.flags		= 0,
-		.ucon		= SMDK4212_UCON_DEFAULT,
-		.ulcon		= SMDK4212_ULCON_DEFAULT,
-		.ufcon		= SMDK4212_UFCON_DEFAULT,
-	},
-	[1] = {
-		.hwport		= 1,
-		.flags		= 0,
-		.ucon		= SMDK4212_UCON_DEFAULT,
-		.ulcon		= SMDK4212_ULCON_DEFAULT,
-		.ufcon		= SMDK4212_UFCON_DEFAULT,
-	},
-	[2] = {
-		.hwport		= 2,
-		.flags		= 0,
-		.ucon		= SMDK4212_UCON_DEFAULT,
-		.ulcon		= SMDK4212_ULCON_DEFAULT,
-		.ufcon		= SMDK4212_UFCON_DEFAULT,
-	},
-	[3] = {
-		.hwport		= 3,
-		.flags		= 0,
-		.ucon		= SMDK4212_UCON_DEFAULT,
-		.ulcon		= SMDK4212_ULCON_DEFAULT,
-		.ufcon		= SMDK4212_UFCON_DEFAULT,
-	},
-};
-
-static struct s3c_sdhci_platdata smdk4212_hsmmc2_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_INTERNAL,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
-	.max_width		= 8,
-	.host_caps		= MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdk4212_hsmmc3_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_INTERNAL,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-static struct regulator_consumer_supply max8997_buck1 =
-	REGULATOR_SUPPLY("vdd_arm", NULL);
-
-static struct regulator_consumer_supply max8997_buck2 =
-	REGULATOR_SUPPLY("vdd_int", NULL);
-
-static struct regulator_consumer_supply max8997_buck3 =
-	REGULATOR_SUPPLY("vdd_g3d", NULL);
-
-static struct regulator_init_data max8997_buck1_data = {
-	.constraints	= {
-		.name		= "VDD_ARM_SMDK4212",
-		.min_uV		= 925000,
-		.max_uV		= 1350000,
-		.always_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &max8997_buck1,
-};
-
-static struct regulator_init_data max8997_buck2_data = {
-	.constraints	= {
-		.name		= "VDD_INT_SMDK4212",
-		.min_uV		= 950000,
-		.max_uV		= 1150000,
-		.always_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &max8997_buck2,
-};
-
-static struct regulator_init_data max8997_buck3_data = {
-	.constraints	= {
-		.name		= "VDD_G3D_SMDK4212",
-		.min_uV		= 950000,
-		.max_uV		= 1150000,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
-				  REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &max8997_buck3,
-};
-
-static struct max8997_regulator_data smdk4212_max8997_regulators[] = {
-	{ MAX8997_BUCK1, &max8997_buck1_data },
-	{ MAX8997_BUCK2, &max8997_buck2_data },
-	{ MAX8997_BUCK3, &max8997_buck3_data },
-};
-
-static struct max8997_platform_data smdk4212_max8997_pdata = {
-	.num_regulators	= ARRAY_SIZE(smdk4212_max8997_regulators),
-	.regulators	= smdk4212_max8997_regulators,
-
-	.buck1_voltage[0] = 1100000,	/* 1.1V */
-	.buck1_voltage[1] = 1100000,	/* 1.1V */
-	.buck1_voltage[2] = 1100000,	/* 1.1V */
-	.buck1_voltage[3] = 1100000,	/* 1.1V */
-	.buck1_voltage[4] = 1100000,	/* 1.1V */
-	.buck1_voltage[5] = 1100000,	/* 1.1V */
-	.buck1_voltage[6] = 1000000,	/* 1.0V */
-	.buck1_voltage[7] = 950000,	/* 0.95V */
-
-	.buck2_voltage[0] = 1100000,	/* 1.1V */
-	.buck2_voltage[1] = 1000000,	/* 1.0V */
-	.buck2_voltage[2] = 950000,	/* 0.95V */
-	.buck2_voltage[3] = 900000,	/* 0.9V */
-	.buck2_voltage[4] = 1100000,	/* 1.1V */
-	.buck2_voltage[5] = 1000000,	/* 1.0V */
-	.buck2_voltage[6] = 950000,	/* 0.95V */
-	.buck2_voltage[7] = 900000,	/* 0.9V */
-
-	.buck5_voltage[0] = 1100000,	/* 1.1V */
-	.buck5_voltage[1] = 1100000,	/* 1.1V */
-	.buck5_voltage[2] = 1100000,	/* 1.1V */
-	.buck5_voltage[3] = 1100000,	/* 1.1V */
-	.buck5_voltage[4] = 1100000,	/* 1.1V */
-	.buck5_voltage[5] = 1100000,	/* 1.1V */
-	.buck5_voltage[6] = 1100000,	/* 1.1V */
-	.buck5_voltage[7] = 1100000,	/* 1.1V */
-};
-
-static struct i2c_board_info smdk4212_i2c_devs0[] __initdata = {
-	{
-		I2C_BOARD_INFO("max8997", 0x66),
-		.platform_data	= &smdk4212_max8997_pdata,
-	}
-};
-
-static struct i2c_board_info smdk4212_i2c_devs1[] __initdata = {
-	{ I2C_BOARD_INFO("wm8994", 0x1a), }
-};
-
-static struct i2c_board_info smdk4212_i2c_devs3[] __initdata = {
-	/* nothing here yet */
-};
-
-static struct i2c_board_info smdk4212_i2c_devs7[] __initdata = {
-	/* nothing here yet */
-};
-
-static struct samsung_bl_gpio_info smdk4212_bl_gpio_info = {
-	.no = EXYNOS4_GPD0(1),
-	.func = S3C_GPIO_SFN(2),
-};
-
-static struct platform_pwm_backlight_data smdk4212_bl_data = {
-	.pwm_id = 1,
-	.pwm_period_ns  = 1000,
-};
-
-static uint32_t smdk4212_keymap[] __initdata = {
-	/* KEY(row, col, keycode) */
-	KEY(1, 0, KEY_D), KEY(1, 1, KEY_A), KEY(1, 2, KEY_B),
-	KEY(1, 3, KEY_E), KEY(1, 4, KEY_C)
-};
-
-static struct matrix_keymap_data smdk4212_keymap_data __initdata = {
-	.keymap		= smdk4212_keymap,
-	.keymap_size	= ARRAY_SIZE(smdk4212_keymap),
-};
-
-static struct samsung_keypad_platdata smdk4212_keypad_data __initdata = {
-	.keymap_data	= &smdk4212_keymap_data,
-	.rows		= 2,
-	.cols		= 5,
-};
-
-static struct platform_device *smdk4212_devices[] __initdata = {
-	&s3c_device_hsmmc2,
-	&s3c_device_hsmmc3,
-	&s3c_device_i2c0,
-	&s3c_device_i2c1,
-	&s3c_device_i2c3,
-	&s3c_device_i2c7,
-	&s3c_device_rtc,
-	&s3c_device_wdt,
-	&samsung_device_keypad,
-};
-
-static void __init smdk4212_map_io(void)
-{
-	clk_xusbxti.rate = 24000000;
-
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
-	s3c24xx_init_clocks(clk_xusbxti.rate);
-	s3c24xx_init_uarts(smdk4212_uartcfgs, ARRAY_SIZE(smdk4212_uartcfgs));
-}
-
-static void __init smdk4212_machine_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-	i2c_register_board_info(0, smdk4212_i2c_devs0,
-				ARRAY_SIZE(smdk4212_i2c_devs0));
-
-	s3c_i2c1_set_platdata(NULL);
-	i2c_register_board_info(1, smdk4212_i2c_devs1,
-				ARRAY_SIZE(smdk4212_i2c_devs1));
-
-	s3c_i2c3_set_platdata(NULL);
-	i2c_register_board_info(3, smdk4212_i2c_devs3,
-				ARRAY_SIZE(smdk4212_i2c_devs3));
-
-	s3c_i2c7_set_platdata(NULL);
-	i2c_register_board_info(7, smdk4212_i2c_devs7,
-				ARRAY_SIZE(smdk4212_i2c_devs7));
-
-	samsung_bl_set(&smdk4212_bl_gpio_info, &smdk4212_bl_data);
-
-	samsung_keypad_set_platdata(&smdk4212_keypad_data);
-
-	s3c_sdhci2_set_platdata(&smdk4212_hsmmc2_pdata);
-	s3c_sdhci3_set_platdata(&smdk4212_hsmmc3_pdata);
-
-	platform_add_devices(smdk4212_devices, ARRAY_SIZE(smdk4212_devices));
-}
-
-MACHINE_START(SMDK4212, "SMDK4212")
-	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	.boot_params	= S5P_PA_SDRAM + 0x100,
-	.init_irq	= exynos4_init_irq,
-	.map_io		= smdk4212_map_io,
-	.init_machine	= smdk4212_machine_init,
-	.timer		= &exynos4_timer,
-MACHINE_END
diff --git a/arch/arm/mach-exynos4/mach-smdk4x12.c b/arch/arm/mach-exynos4/mach-smdk4x12.c
new file mode 100644
index 00000000000..fcf2e0e23d5
--- /dev/null
+++ b/arch/arm/mach-exynos4/mach-smdk4x12.c
@@ -0,0 +1,302 @@
+/*
+ * linux/arch/arm/mach-exynos4/mach-smdk4x12.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/mfd/max8997.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+#include <linux/pwm_backlight.h>
+#include <linux/regulator/machine.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <plat/backlight.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/exynos4.h>
+#include <plat/gpio-cfg.h>
+#include <plat/iic.h>
+#include <plat/keypad.h>
+#include <plat/regs-serial.h>
+#include <plat/sdhci.h>
+
+#include <mach/map.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define SMDK4X12_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				 S3C2410_UCON_RXILEVEL |	\
+				 S3C2410_UCON_TXIRQMODE |	\
+				 S3C2410_UCON_RXIRQMODE |	\
+				 S3C2410_UCON_RXFIFO_TOI |	\
+				 S3C2443_UCON_RXERR_IRQEN)
+
+#define SMDK4X12_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define SMDK4X12_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				 S5PV210_UFCON_TXTRIG4 |	\
+				 S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg smdk4x12_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= SMDK4X12_UCON_DEFAULT,
+		.ulcon		= SMDK4X12_ULCON_DEFAULT,
+		.ufcon		= SMDK4X12_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= SMDK4X12_UCON_DEFAULT,
+		.ulcon		= SMDK4X12_ULCON_DEFAULT,
+		.ufcon		= SMDK4X12_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= SMDK4X12_UCON_DEFAULT,
+		.ulcon		= SMDK4X12_ULCON_DEFAULT,
+		.ufcon		= SMDK4X12_UFCON_DEFAULT,
+	},
+	[3] = {
+		.hwport		= 3,
+		.flags		= 0,
+		.ucon		= SMDK4X12_UCON_DEFAULT,
+		.ulcon		= SMDK4X12_ULCON_DEFAULT,
+		.ufcon		= SMDK4X12_UFCON_DEFAULT,
+	},
+};
+
+static struct s3c_sdhci_platdata smdk4x12_hsmmc2_pdata __initdata = {
+	.cd_type		= S3C_SDHCI_CD_INTERNAL,
+	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
+#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
+	.max_width		= 8,
+	.host_caps		= MMC_CAP_8_BIT_DATA,
+#endif
+};
+
+static struct s3c_sdhci_platdata smdk4x12_hsmmc3_pdata __initdata = {
+	.cd_type		= S3C_SDHCI_CD_INTERNAL,
+	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct regulator_consumer_supply max8997_buck1 =
+	REGULATOR_SUPPLY("vdd_arm", NULL);
+
+static struct regulator_consumer_supply max8997_buck2 =
+	REGULATOR_SUPPLY("vdd_int", NULL);
+
+static struct regulator_consumer_supply max8997_buck3 =
+	REGULATOR_SUPPLY("vdd_g3d", NULL);
+
+static struct regulator_init_data max8997_buck1_data = {
+	.constraints	= {
+		.name		= "VDD_ARM_SMDK4X12",
+		.min_uV		= 925000,
+		.max_uV		= 1350000,
+		.always_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &max8997_buck1,
+};
+
+static struct regulator_init_data max8997_buck2_data = {
+	.constraints	= {
+		.name		= "VDD_INT_SMDK4X12",
+		.min_uV		= 950000,
+		.max_uV		= 1150000,
+		.always_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &max8997_buck2,
+};
+
+static struct regulator_init_data max8997_buck3_data = {
+	.constraints	= {
+		.name		= "VDD_G3D_SMDK4X12",
+		.min_uV		= 950000,
+		.max_uV		= 1150000,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
+				  REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &max8997_buck3,
+};
+
+static struct max8997_regulator_data smdk4x12_max8997_regulators[] = {
+	{ MAX8997_BUCK1, &max8997_buck1_data },
+	{ MAX8997_BUCK2, &max8997_buck2_data },
+	{ MAX8997_BUCK3, &max8997_buck3_data },
+};
+
+static struct max8997_platform_data smdk4x12_max8997_pdata = {
+	.num_regulators	= ARRAY_SIZE(smdk4x12_max8997_regulators),
+	.regulators	= smdk4x12_max8997_regulators,
+
+	.buck1_voltage[0] = 1100000,	/* 1.1V */
+	.buck1_voltage[1] = 1100000,	/* 1.1V */
+	.buck1_voltage[2] = 1100000,	/* 1.1V */
+	.buck1_voltage[3] = 1100000,	/* 1.1V */
+	.buck1_voltage[4] = 1100000,	/* 1.1V */
+	.buck1_voltage[5] = 1100000,	/* 1.1V */
+	.buck1_voltage[6] = 1000000,	/* 1.0V */
+	.buck1_voltage[7] = 950000,	/* 0.95V */
+
+	.buck2_voltage[0] = 1100000,	/* 1.1V */
+	.buck2_voltage[1] = 1000000,	/* 1.0V */
+	.buck2_voltage[2] = 950000,	/* 0.95V */
+	.buck2_voltage[3] = 900000,	/* 0.9V */
+	.buck2_voltage[4] = 1100000,	/* 1.1V */
+	.buck2_voltage[5] = 1000000,	/* 1.0V */
+	.buck2_voltage[6] = 950000,	/* 0.95V */
+	.buck2_voltage[7] = 900000,	/* 0.9V */
+
+	.buck5_voltage[0] = 1100000,	/* 1.1V */
+	.buck5_voltage[1] = 1100000,	/* 1.1V */
+	.buck5_voltage[2] = 1100000,	/* 1.1V */
+	.buck5_voltage[3] = 1100000,	/* 1.1V */
+	.buck5_voltage[4] = 1100000,	/* 1.1V */
+	.buck5_voltage[5] = 1100000,	/* 1.1V */
+	.buck5_voltage[6] = 1100000,	/* 1.1V */
+	.buck5_voltage[7] = 1100000,	/* 1.1V */
+};
+
+static struct i2c_board_info smdk4x12_i2c_devs0[] __initdata = {
+	{
+		I2C_BOARD_INFO("max8997", 0x66),
+		.platform_data	= &smdk4x12_max8997_pdata,
+	}
+};
+
+static struct i2c_board_info smdk4x12_i2c_devs1[] __initdata = {
+	{ I2C_BOARD_INFO("wm8994", 0x1a), }
+};
+
+static struct i2c_board_info smdk4x12_i2c_devs3[] __initdata = {
+	/* nothing here yet */
+};
+
+static struct i2c_board_info smdk4x12_i2c_devs7[] __initdata = {
+	/* nothing here yet */
+};
+
+static struct samsung_bl_gpio_info smdk4x12_bl_gpio_info = {
+	.no = EXYNOS4_GPD0(1),
+	.func = S3C_GPIO_SFN(2),
+};
+
+static struct platform_pwm_backlight_data smdk4x12_bl_data = {
+	.pwm_id = 1,
+	.pwm_period_ns  = 1000,
+};
+
+static uint32_t smdk4x12_keymap[] __initdata = {
+	/* KEY(row, col, keycode) */
+	KEY(1, 0, KEY_D), KEY(1, 1, KEY_A), KEY(1, 2, KEY_B),
+	KEY(1, 3, KEY_E), KEY(1, 4, KEY_C)
+};
+
+static struct matrix_keymap_data smdk4x12_keymap_data __initdata = {
+	.keymap		= smdk4x12_keymap,
+	.keymap_size	= ARRAY_SIZE(smdk4x12_keymap),
+};
+
+static struct samsung_keypad_platdata smdk4x12_keypad_data __initdata = {
+	.keymap_data	= &smdk4x12_keymap_data,
+	.rows		= 2,
+	.cols		= 5,
+};
+
+static struct platform_device *smdk4x12_devices[] __initdata = {
+	&s3c_device_hsmmc2,
+	&s3c_device_hsmmc3,
+	&s3c_device_i2c0,
+	&s3c_device_i2c1,
+	&s3c_device_i2c3,
+	&s3c_device_i2c7,
+	&s3c_device_rtc,
+	&s3c_device_wdt,
+	&samsung_device_keypad,
+};
+
+static void __init smdk4x12_map_io(void)
+{
+	clk_xusbxti.rate = 24000000;
+
+	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s3c24xx_init_clocks(clk_xusbxti.rate);
+	s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs));
+}
+
+static void __init smdk4x12_machine_init(void)
+{
+	s3c_i2c0_set_platdata(NULL);
+	i2c_register_board_info(0, smdk4x12_i2c_devs0,
+				ARRAY_SIZE(smdk4x12_i2c_devs0));
+
+	s3c_i2c1_set_platdata(NULL);
+	i2c_register_board_info(1, smdk4x12_i2c_devs1,
+				ARRAY_SIZE(smdk4x12_i2c_devs1));
+
+	s3c_i2c3_set_platdata(NULL);
+	i2c_register_board_info(3, smdk4x12_i2c_devs3,
+				ARRAY_SIZE(smdk4x12_i2c_devs3));
+
+	s3c_i2c7_set_platdata(NULL);
+	i2c_register_board_info(7, smdk4x12_i2c_devs7,
+				ARRAY_SIZE(smdk4x12_i2c_devs7));
+
+	samsung_bl_set(&smdk4x12_bl_gpio_info, &smdk4x12_bl_data);
+
+	samsung_keypad_set_platdata(&smdk4x12_keypad_data);
+
+	s3c_sdhci2_set_platdata(&smdk4x12_hsmmc2_pdata);
+	s3c_sdhci3_set_platdata(&smdk4x12_hsmmc3_pdata);
+
+	platform_add_devices(smdk4x12_devices, ARRAY_SIZE(smdk4x12_devices));
+}
+
+MACHINE_START(SMDK4212, "SMDK4212")
+	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+	.atag_offset	= 0x100,
+	.init_irq	= exynos4_init_irq,
+	.map_io		= smdk4x12_map_io,
+	.init_machine	= smdk4x12_machine_init,
+	.timer		= &exynos4_timer,
+MACHINE_END
+
+MACHINE_START(SMDK4412, "SMDK4412")
+	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+	/* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
+	.atag_offset	= 0x100,
+	.init_irq	= exynos4_init_irq,
+	.map_io		= smdk4x12_map_io,
+	.init_machine	= smdk4x12_machine_init,
+	.timer		= &exynos4_timer,
+MACHINE_END
-- 
cgit v1.2.3-18-g5258


From c40e7e0d91b799ed5acf79ae16a2521809d03dd5 Mon Sep 17 00:00:00 2001
From: Tomasz Stanislawski <t.stanislaws@samsung.com>
Date: Fri, 16 Sep 2011 18:44:36 +0900
Subject: ARM: SAMSUNG: add i2c hdmiphy controller definitions

This patch adds hdmiphy dedicated i2c controller definitions.

Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[m.szyprowski: renamed to i2c-hdmiphy and squashed Exynos4 and S5PV210 patches]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/clock.c                    |  6 +++
 arch/arm/mach-exynos4/include/mach/i2c-hdmiphy.h | 16 +++++++
 arch/arm/mach-exynos4/include/mach/irqs.h        |  2 +
 arch/arm/mach-exynos4/include/mach/map.h         |  4 ++
 arch/arm/mach-s5pv210/clock.c                    |  6 +++
 arch/arm/mach-s5pv210/include/mach/i2c-hdmiphy.h | 16 +++++++
 arch/arm/mach-s5pv210/include/mach/irqs.h        |  2 +-
 arch/arm/mach-s5pv210/include/mach/map.h         |  3 ++
 arch/arm/plat-s5p/Kconfig                        |  5 ++
 arch/arm/plat-s5p/Makefile                       |  1 +
 arch/arm/plat-s5p/dev-i2c-hdmiphy.c              | 59 ++++++++++++++++++++++++
 arch/arm/plat-samsung/include/plat/devs.h        |  1 +
 arch/arm/plat-samsung/include/plat/iic.h         |  1 +
 13 files changed, 121 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-exynos4/include/mach/i2c-hdmiphy.h
 create mode 100644 arch/arm/mach-s5pv210/include/mach/i2c-hdmiphy.h
 create mode 100644 arch/arm/plat-s5p/dev-i2c-hdmiphy.c

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos4/clock.c
index e85c481ec7a..0e1ba071e76 100644
--- a/arch/arm/mach-exynos4/clock.c
+++ b/arch/arm/mach-exynos4/clock.c
@@ -585,6 +585,12 @@ static struct clk init_clocks_off[] = {
 		.parent		= &clk_aclk_100.clk,
 		.enable		= exynos4_clk_ip_peril_ctrl,
 		.ctrlbit	= (1 << 13),
+	}, {
+		.name		= "i2c",
+		.devname	= "s3c2440-hdmiphy-i2c",
+		.parent		= &clk_aclk_100.clk,
+		.enable		= exynos4_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 14),
 	}, {
 		.name		= "SYSMMU_MDMA",
 		.enable		= exynos4_clk_ip_image_ctrl,
diff --git a/arch/arm/mach-exynos4/include/mach/i2c-hdmiphy.h b/arch/arm/mach-exynos4/include/mach/i2c-hdmiphy.h
new file mode 100644
index 00000000000..9dbe3179ad5
--- /dev/null
+++ b/arch/arm/mach-exynos4/include/mach/i2c-hdmiphy.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ *
+ * S5P series i2c hdmiphy helper definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef PLAT_S5P_I2C_HDMIPHY_H_
+#define PLAT_S5P_I2C_HDMIPHY_H_
+
+#define S5P_I2C_HDMIPHY_BUS_NUM		(8)
+
+#endif
diff --git a/arch/arm/mach-exynos4/include/mach/irqs.h b/arch/arm/mach-exynos4/include/mach/irqs.h
index f8952f8f375..85011c2d983 100644
--- a/arch/arm/mach-exynos4/include/mach/irqs.h
+++ b/arch/arm/mach-exynos4/include/mach/irqs.h
@@ -93,6 +93,8 @@
 #define IRQ_2D			IRQ_SPI(89)
 #define IRQ_PCIE		IRQ_SPI(90)
 
+#define IRQ_IIC_HDMIPHY		IRQ_SPI(93)
+
 #define IRQ_MFC			IRQ_SPI(94)
 
 #define IRQ_AUDIO_SS		IRQ_SPI(96)
diff --git a/arch/arm/mach-exynos4/include/mach/map.h b/arch/arm/mach-exynos4/include/mach/map.h
index d32296dc65e..380feb98150 100644
--- a/arch/arm/mach-exynos4/include/mach/map.h
+++ b/arch/arm/mach-exynos4/include/mach/map.h
@@ -112,6 +112,8 @@
 
 #define EXYNOS4_PA_UART			0x13800000
 
+#define EXYNOS4_PA_IIC_HDMIPHY		0x138E0000
+
 #define EXYNOS4_PA_IIC(x)		(0x13860000 + ((x) * 0x10000))
 
 #define EXYNOS4_PA_ADC			0x13910000
@@ -161,6 +163,8 @@
 #define S5P_PA_TIMER			EXYNOS4_PA_TIMER
 #define S5P_PA_EHCI			EXYNOS4_PA_EHCI
 
+#define S5P_PA_IIC_HDMIPHY		EXYNOS4_PA_IIC_HDMIPHY
+
 #define SAMSUNG_PA_KEYPAD		EXYNOS4_PA_KEYPAD
 
 /* UART */
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index e93ce3ed5b9..60cf8226de8 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -411,6 +411,12 @@ static struct clk init_clocks_off[] = {
 		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip3_ctrl,
 		.ctrlbit	= (1<<9),
+	}, {
+		.name		= "i2c",
+		.devname	= "s3c2440-hdmiphy-i2c",
+		.parent		= &clk_pclk_psys.clk,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1 << 11),
 	}, {
 		.name		= "spi",
 		.devname	= "s3c64xx-spi.0",
diff --git a/arch/arm/mach-s5pv210/include/mach/i2c-hdmiphy.h b/arch/arm/mach-s5pv210/include/mach/i2c-hdmiphy.h
new file mode 100644
index 00000000000..6afa6242c58
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/i2c-hdmiphy.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ *
+ * S5P series i2c hdmiphy helper definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef PLAT_S5P_I2C_HDMIPHY_H_
+#define PLAT_S5P_I2C_HDMIPHY_H_
+
+#define S5P_I2C_HDMIPHY_BUS_NUM		(3)
+
+#endif
diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h
index b9f9ec33384..c1da0a7fb18 100644
--- a/arch/arm/mach-s5pv210/include/mach/irqs.h
+++ b/arch/arm/mach-s5pv210/include/mach/irqs.h
@@ -56,7 +56,7 @@
 #define IRQ_SPI2		S5P_IRQ_VIC1(17)
 #define IRQ_IRDA		S5P_IRQ_VIC1(18)
 #define IRQ_IIC2		S5P_IRQ_VIC1(19)
-#define IRQ_IIC3		S5P_IRQ_VIC1(20)
+#define IRQ_IIC_HDMIPHY		S5P_IRQ_VIC1(20)
 #define IRQ_HSIRX		S5P_IRQ_VIC1(21)
 #define IRQ_HSITX		S5P_IRQ_VIC1(22)
 #define IRQ_UHOST		S5P_IRQ_VIC1(23)
diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h
index aac343c180b..a420654c2c7 100644
--- a/arch/arm/mach-s5pv210/include/mach/map.h
+++ b/arch/arm/mach-s5pv210/include/mach/map.h
@@ -90,6 +90,8 @@
 #define S5PV210_PA_FIMC1		0xFB300000
 #define S5PV210_PA_FIMC2		0xFB400000
 
+#define S5PV210_PA_IIC_HDMIPHY		0xFA900000
+
 /* Compatibiltiy Defines */
 
 #define S3C_PA_FB			S5PV210_PA_FB
@@ -110,6 +112,7 @@
 #define S5P_PA_FIMC2			S5PV210_PA_FIMC2
 #define S5P_PA_MIPI_CSIS0		S5PV210_PA_MIPI_CSIS
 #define S5P_PA_MFC			S5PV210_PA_MFC
+#define S5P_PA_IIC_HDMIPHY		S5PV210_PA_IIC_HDMIPHY
 #define S5P_PA_ONENAND			S5PC110_PA_ONENAND
 #define S5P_PA_ONENAND_DMA		S5PC110_PA_ONENAND_DMA
 #define S5P_PA_SDRAM			S5PV210_PA_SDRAM
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index ac610bee2cb..a554d03b99b 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -73,6 +73,11 @@ config S5P_DEV_FIMD0
 	help
 	  Compile in platform device definitions for FIMD controller 0
 
+config S5P_DEV_I2C_HDMIPHY
+	bool
+	help
+	  Compile in platform device definitions for I2C HDMIPHY controller
+
 config S5P_DEV_MFC
 	bool
 	help
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
index 4b53e04eeca..1dd10dc91e6 100644
--- a/arch/arm/plat-s5p/Makefile
+++ b/arch/arm/plat-s5p/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_S5P_DEV_FIMC1)	+= dev-fimc1.o
 obj-$(CONFIG_S5P_DEV_FIMC2)	+= dev-fimc2.o
 obj-$(CONFIG_S5P_DEV_FIMC3)	+= dev-fimc3.o
 obj-$(CONFIG_S5P_DEV_FIMD0)	+= dev-fimd0.o
+obj-$(CONFIG_S5P_DEV_I2C_HDMIPHY) += dev-i2c-hdmiphy.o
 obj-$(CONFIG_S5P_DEV_ONENAND)	+= dev-onenand.o
 obj-$(CONFIG_S5P_DEV_CSIS0)	+= dev-csis0.o
 obj-$(CONFIG_S5P_DEV_CSIS1)	+= dev-csis1.o
diff --git a/arch/arm/plat-s5p/dev-i2c-hdmiphy.c b/arch/arm/plat-s5p/dev-i2c-hdmiphy.c
new file mode 100644
index 00000000000..37343f1999f
--- /dev/null
+++ b/arch/arm/plat-s5p/dev-i2c-hdmiphy.c
@@ -0,0 +1,59 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P series device definition for i2c for hdmiphy device
+ *
+ * Based on plat-samsung/dev-i2c7.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+#include <mach/i2c-hdmiphy.h>
+
+#include <plat/regs-iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/iic.h>
+
+static struct resource s5p_i2c_resource[] = {
+	[0] = {
+		.start = S5P_PA_IIC_HDMIPHY,
+		.end   = S5P_PA_IIC_HDMIPHY + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_IIC_HDMIPHY,
+		.end   = IRQ_IIC_HDMIPHY,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s5p_device_i2c_hdmiphy = {
+	.name		  = "s3c2440-hdmiphy-i2c",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s5p_i2c_resource),
+	.resource	  = s5p_i2c_resource,
+};
+
+void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+	struct s3c2410_platform_i2c *npd;
+
+	if (!pd) {
+		pd = &default_i2c_data;
+		pd->bus_num = S5P_I2C_HDMIPHY_BUS_NUM;
+	}
+
+	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
+			       &s5p_device_i2c_hdmiphy);
+}
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index 24ebb1e1de4..b15805f4de9 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -62,6 +62,7 @@ extern struct platform_device s3c_device_i2c4;
 extern struct platform_device s3c_device_i2c5;
 extern struct platform_device s3c_device_i2c6;
 extern struct platform_device s3c_device_i2c7;
+extern struct platform_device s5p_device_i2c_hdmiphy;
 extern struct platform_device s3c_device_rtc;
 extern struct platform_device s3c_device_adc;
 extern struct platform_device s3c_device_sdi;
diff --git a/arch/arm/plat-samsung/include/plat/iic.h b/arch/arm/plat-samsung/include/plat/iic.h
index 56b0059439e..51d52e767a1 100644
--- a/arch/arm/plat-samsung/include/plat/iic.h
+++ b/arch/arm/plat-samsung/include/plat/iic.h
@@ -60,6 +60,7 @@ extern void s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *i2c);
 extern void s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *i2c);
 extern void s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *i2c);
 extern void s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *i2c);
 
 /* defined by architecture to configure gpio */
 extern void s3c_i2c0_cfg_gpio(struct platform_device *dev);
-- 
cgit v1.2.3-18-g5258


From fbf05563fe2a3c83c18b4e2768a0d96971a07b16 Mon Sep 17 00:00:00 2001
From: Tomasz Stanislawski <t.stanislaws@samsung.com>
Date: Mon, 19 Sep 2011 16:44:42 +0900
Subject: ARM: S5P: add support for tv device

This patch adds all the resources for TV drivers and devices for Samsung
Exynos4 and S5PV210 platforms.

Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[m.szyprowski: squashed Exynos4 and S5PV210 patches and rewrote commit message]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/clock.c                   | 194 +++++++++++++++++++++++-
 arch/arm/mach-exynos4/cpu.c                     |   2 +
 arch/arm/mach-exynos4/include/mach/irqs.h       |   4 +-
 arch/arm/mach-exynos4/include/mach/map.h        |   8 +
 arch/arm/mach-exynos4/include/mach/regs-pmu.h   |   6 +
 arch/arm/mach-s5pv210/clock.c                   | 131 ++++++++++++++--
 arch/arm/mach-s5pv210/cpu.c                     |   4 +
 arch/arm/mach-s5pv210/include/mach/irqs.h       |   2 +-
 arch/arm/mach-s5pv210/include/mach/map.h        |  10 ++
 arch/arm/mach-s5pv210/include/mach/regs-clock.h |   3 +-
 arch/arm/plat-s5p/Kconfig                       |   5 +
 arch/arm/plat-s5p/Makefile                      |   1 +
 arch/arm/plat-s5p/dev-tv.c                      |  98 ++++++++++++
 arch/arm/plat-s5p/include/plat/pll.h            |  14 +-
 arch/arm/plat-samsung/include/plat/devs.h       |   5 +
 arch/arm/plat-samsung/include/plat/tv-core.h    |  44 ++++++
 16 files changed, 514 insertions(+), 17 deletions(-)
 create mode 100644 arch/arm/plat-s5p/dev-tv.c
 create mode 100644 arch/arm/plat-samsung/include/plat/tv-core.h

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos4/clock.c
index 0e1ba071e76..13e2421ba9e 100644
--- a/arch/arm/mach-exynos4/clock.c
+++ b/arch/arm/mach-exynos4/clock.c
@@ -88,6 +88,11 @@ static int exynos4_clk_ip_mfc_ctrl(struct clk *clk, int enable)
 	return s5p_gatectrl(S5P_CLKGATE_IP_MFC, clk, enable);
 }
 
+static int exynos4_clksrc_mask_tv_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKSRC_MASK_TV, clk, enable);
+}
+
 static int exynos4_clk_ip_cam_ctrl(struct clk *clk, int enable)
 {
 	return s5p_gatectrl(S5P_CLKGATE_IP_CAM, clk, enable);
@@ -128,6 +133,16 @@ static int exynos4_clk_ip_perir_ctrl(struct clk *clk, int enable)
 	return s5p_gatectrl(S5P_CLKGATE_IP_PERIR, clk, enable);
 }
 
+static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
+}
+
+static int exynos4_clk_dac_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_DAC_PHY_CONTROL, clk, enable);
+}
+
 /* Core list of CMU_CPU side */
 
 static struct clksrc_clk clk_mout_apll = {
@@ -453,6 +468,36 @@ static struct clk init_clocks_off[] = {
 		.parent		= &clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 9),
+	}, {
+		.name		= "dac",
+		.devname	= "s5p-sdo",
+		.enable		= exynos4_clk_ip_tv_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "mixer",
+		.devname	= "s5p-mixer",
+		.enable		= exynos4_clk_ip_tv_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "vp",
+		.devname	= "s5p-mixer",
+		.enable		= exynos4_clk_ip_tv_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "hdmi",
+		.devname	= "exynos4-hdmi",
+		.enable		= exynos4_clk_ip_tv_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "hdmiphy",
+		.devname	= "exynos4-hdmi",
+		.enable		= exynos4_clk_hdmiphy_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "dacphy",
+		.devname	= "s5p-sdo",
+		.enable		= exynos4_clk_dac_ctrl,
+		.ctrlbit	= (1 << 0),
 	}, {
 		.name		= "sata",
 		.parent		= &clk_aclk_133.clk,
@@ -793,6 +838,81 @@ static struct clksrc_sources clkset_mout_mfc = {
 	.nr_sources	= ARRAY_SIZE(clkset_mout_mfc_list),
 };
 
+static struct clk *clkset_sclk_dac_list[] = {
+	[0] = &clk_sclk_vpll.clk,
+	[1] = &clk_sclk_hdmiphy,
+};
+
+static struct clksrc_sources clkset_sclk_dac = {
+	.sources	= clkset_sclk_dac_list,
+	.nr_sources	= ARRAY_SIZE(clkset_sclk_dac_list),
+};
+
+static struct clksrc_clk clk_sclk_dac = {
+	.clk		= {
+		.name		= "sclk_dac",
+		.enable		= exynos4_clksrc_mask_tv_ctrl,
+		.ctrlbit	= (1 << 8),
+	},
+	.sources = &clkset_sclk_dac,
+	.reg_src = { .reg = S5P_CLKSRC_TV, .shift = 8, .size = 1 },
+};
+
+static struct clksrc_clk clk_sclk_pixel = {
+	.clk		= {
+		.name		= "sclk_pixel",
+		.parent = &clk_sclk_vpll.clk,
+	},
+	.reg_div = { .reg = S5P_CLKDIV_TV, .shift = 0, .size = 4 },
+};
+
+static struct clk *clkset_sclk_hdmi_list[] = {
+	[0] = &clk_sclk_pixel.clk,
+	[1] = &clk_sclk_hdmiphy,
+};
+
+static struct clksrc_sources clkset_sclk_hdmi = {
+	.sources	= clkset_sclk_hdmi_list,
+	.nr_sources	= ARRAY_SIZE(clkset_sclk_hdmi_list),
+};
+
+static struct clksrc_clk clk_sclk_hdmi = {
+	.clk		= {
+		.name		= "sclk_hdmi",
+		.enable		= exynos4_clksrc_mask_tv_ctrl,
+		.ctrlbit	= (1 << 0),
+	},
+	.sources = &clkset_sclk_hdmi,
+	.reg_src = { .reg = S5P_CLKSRC_TV, .shift = 0, .size = 1 },
+};
+
+static struct clk *clkset_sclk_mixer_list[] = {
+	[0] = &clk_sclk_dac.clk,
+	[1] = &clk_sclk_hdmi.clk,
+};
+
+static struct clksrc_sources clkset_sclk_mixer = {
+	.sources	= clkset_sclk_mixer_list,
+	.nr_sources	= ARRAY_SIZE(clkset_sclk_mixer_list),
+};
+
+static struct clksrc_clk clk_sclk_mixer = {
+	.clk		= {
+		.name		= "sclk_mixer",
+		.enable		= exynos4_clksrc_mask_tv_ctrl,
+		.ctrlbit	= (1 << 4),
+	},
+	.sources = &clkset_sclk_mixer,
+	.reg_src = { .reg = S5P_CLKSRC_TV, .shift = 4, .size = 1 },
+};
+
+static struct clksrc_clk *sclk_tv[] = {
+	&clk_sclk_dac,
+	&clk_sclk_pixel,
+	&clk_sclk_hdmi,
+	&clk_sclk_mixer,
+};
+
 static struct clksrc_clk clk_dout_mmc0 = {
 	.clk		= {
 		.name		= "dout_mmc0",
@@ -1132,6 +1252,71 @@ static struct clk_ops exynos4_fout_apll_ops = {
 	.get_rate = exynos4_fout_apll_get_rate,
 };
 
+static u32 vpll_div[][8] = {
+	{  54000000, 3, 53, 3, 1024, 0, 17, 0 },
+	{ 108000000, 3, 53, 2, 1024, 0, 17, 0 },
+};
+
+static unsigned long exynos4_vpll_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+
+static int exynos4_vpll_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int vpll_con0, vpll_con1 = 0;
+	unsigned int i;
+
+	/* Return if nothing changed */
+	if (clk->rate == rate)
+		return 0;
+
+	vpll_con0 = __raw_readl(S5P_VPLL_CON0);
+	vpll_con0 &= ~(0x1 << 27 |					\
+			PLL90XX_MDIV_MASK << PLL46XX_MDIV_SHIFT |	\
+			PLL90XX_PDIV_MASK << PLL46XX_PDIV_SHIFT |	\
+			PLL90XX_SDIV_MASK << PLL46XX_SDIV_SHIFT);
+
+	vpll_con1 = __raw_readl(S5P_VPLL_CON1);
+	vpll_con1 &= ~(PLL46XX_MRR_MASK << PLL46XX_MRR_SHIFT |	\
+			PLL46XX_MFR_MASK << PLL46XX_MFR_SHIFT |	\
+			PLL4650C_KDIV_MASK << PLL46XX_KDIV_SHIFT);
+
+	for (i = 0; i < ARRAY_SIZE(vpll_div); i++) {
+		if (vpll_div[i][0] == rate) {
+			vpll_con0 |= vpll_div[i][1] << PLL46XX_PDIV_SHIFT;
+			vpll_con0 |= vpll_div[i][2] << PLL46XX_MDIV_SHIFT;
+			vpll_con0 |= vpll_div[i][3] << PLL46XX_SDIV_SHIFT;
+			vpll_con1 |= vpll_div[i][4] << PLL46XX_KDIV_SHIFT;
+			vpll_con1 |= vpll_div[i][5] << PLL46XX_MFR_SHIFT;
+			vpll_con1 |= vpll_div[i][6] << PLL46XX_MRR_SHIFT;
+			vpll_con0 |= vpll_div[i][7] << 27;
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(vpll_div)) {
+		printk(KERN_ERR "%s: Invalid Clock VPLL Frequency\n",
+				__func__);
+		return -EINVAL;
+	}
+
+	__raw_writel(vpll_con0, S5P_VPLL_CON0);
+	__raw_writel(vpll_con1, S5P_VPLL_CON1);
+
+	/* Wait for VPLL lock */
+	while (!(__raw_readl(S5P_VPLL_CON0) & (1 << PLL46XX_LOCKED_SHIFT)))
+		continue;
+
+	clk->rate = rate;
+	return 0;
+}
+
+static struct clk_ops exynos4_vpll_ops = {
+	.get_rate = exynos4_vpll_get_rate,
+	.set_rate = exynos4_vpll_set_rate,
+};
+
 void __init_or_cpufreq exynos4_setup_clocks(void)
 {
 	struct clk *xtal_clk;
@@ -1174,6 +1359,7 @@ void __init_or_cpufreq exynos4_setup_clocks(void)
 	clk_fout_apll.ops = &exynos4_fout_apll_ops;
 	clk_fout_mpll.rate = mpll;
 	clk_fout_epll.rate = epll;
+	clk_fout_vpll.ops = &exynos4_vpll_ops;
 	clk_fout_vpll.rate = vpll;
 
 	printk(KERN_INFO "EXYNOS4: PLL settings, A=%ld, M=%ld, E=%ld V=%ld",
@@ -1201,7 +1387,10 @@ void __init_or_cpufreq exynos4_setup_clocks(void)
 }
 
 static struct clk *clks[] __initdata = {
-	/* Nothing here yet */
+	&clk_sclk_hdmi27m,
+	&clk_sclk_hdmiphy,
+	&clk_sclk_usbphy0,
+	&clk_sclk_usbphy1,
 };
 
 void __init exynos4_register_clocks(void)
@@ -1213,6 +1402,9 @@ void __init exynos4_register_clocks(void)
 	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
 		s3c_register_clksrc(sysclks[ptr], 1);
 
+	for (ptr = 0; ptr < ARRAY_SIZE(sclk_tv); ptr++)
+		s3c_register_clksrc(sclk_tv[ptr], 1);
+
 	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
 	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
 
diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c
index 746d6fc6d39..62e46e1b0b8 100644
--- a/arch/arm/mach-exynos4/cpu.c
+++ b/arch/arm/mach-exynos4/cpu.c
@@ -28,6 +28,7 @@
 #include <plat/fimc-core.h>
 #include <plat/iic-core.h>
 #include <plat/reset.h>
+#include <plat/tv-core.h>
 
 #include <mach/regs-irq.h>
 #include <mach/regs-pmu.h>
@@ -162,6 +163,7 @@ void __init exynos4_map_io(void)
 	s3c_i2c2_setname("s3c2440-i2c");
 
 	s5p_fb_setname(0, "exynos4-fb");
+	s5p_hdmi_setname("exynos4-hdmi");
 }
 
 void __init exynos4_init_clocks(int xtal)
diff --git a/arch/arm/mach-exynos4/include/mach/irqs.h b/arch/arm/mach-exynos4/include/mach/irqs.h
index 85011c2d983..62093b9339d 100644
--- a/arch/arm/mach-exynos4/include/mach/irqs.h
+++ b/arch/arm/mach-exynos4/include/mach/irqs.h
@@ -93,9 +93,11 @@
 #define IRQ_2D			IRQ_SPI(89)
 #define IRQ_PCIE		IRQ_SPI(90)
 
+#define IRQ_MIXER		IRQ_SPI(91)
+#define IRQ_HDMI		IRQ_SPI(92)
 #define IRQ_IIC_HDMIPHY		IRQ_SPI(93)
-
 #define IRQ_MFC			IRQ_SPI(94)
+#define IRQ_SDO			IRQ_SPI(95)
 
 #define IRQ_AUDIO_SS		IRQ_SPI(96)
 #define IRQ_I2S0		IRQ_SPI(97)
diff --git a/arch/arm/mach-exynos4/include/mach/map.h b/arch/arm/mach-exynos4/include/mach/map.h
index 380feb98150..d1af8563d73 100644
--- a/arch/arm/mach-exynos4/include/mach/map.h
+++ b/arch/arm/mach-exynos4/include/mach/map.h
@@ -112,6 +112,10 @@
 
 #define EXYNOS4_PA_UART			0x13800000
 
+#define EXYNOS4_PA_VP			0x12C00000
+#define EXYNOS4_PA_MIXER		0x12C10000
+#define EXYNOS4_PA_SDO			0x12C20000
+#define EXYNOS4_PA_HDMI			0x12D00000
 #define EXYNOS4_PA_IIC_HDMIPHY		0x138E0000
 
 #define EXYNOS4_PA_IIC(x)		(0x13860000 + ((x) * 0x10000))
@@ -163,6 +167,10 @@
 #define S5P_PA_TIMER			EXYNOS4_PA_TIMER
 #define S5P_PA_EHCI			EXYNOS4_PA_EHCI
 
+#define S5P_PA_SDO			EXYNOS4_PA_SDO
+#define S5P_PA_VP			EXYNOS4_PA_VP
+#define S5P_PA_MIXER			EXYNOS4_PA_MIXER
+#define S5P_PA_HDMI			EXYNOS4_PA_HDMI
 #define S5P_PA_IIC_HDMIPHY		EXYNOS4_PA_IIC_HDMIPHY
 
 #define SAMSUNG_PA_KEYPAD		EXYNOS4_PA_KEYPAD
diff --git a/arch/arm/mach-exynos4/include/mach/regs-pmu.h b/arch/arm/mach-exynos4/include/mach/regs-pmu.h
index cdf9b47c303..125ced2ad2f 100644
--- a/arch/arm/mach-exynos4/include/mach/regs-pmu.h
+++ b/arch/arm/mach-exynos4/include/mach/regs-pmu.h
@@ -35,9 +35,15 @@
 #define S5P_EINT_WAKEUP_MASK			S5P_PMUREG(0x0604)
 #define S5P_WAKEUP_MASK				S5P_PMUREG(0x0608)
 
+#define S5P_HDMI_PHY_CONTROL			S5P_PMUREG(0x0700)
+#define S5P_HDMI_PHY_ENABLE			(1 << 0)
+
 #define S5P_USBHOST_PHY_CONTROL			S5P_PMUREG(0x0708)
 #define S5P_USBHOST_PHY_ENABLE			(1 << 0)
 
+#define S5P_DAC_PHY_CONTROL			S5P_PMUREG(0x070C)
+#define S5P_DAC_PHY_ENABLE			(1 << 0)
+
 #define S5P_MIPI_DPHY_CONTROL(n)		S5P_PMUREG(0x0710 + (n) * 4)
 #define S5P_MIPI_DPHY_ENABLE			(1 << 0)
 #define S5P_MIPI_DPHY_SRESETN			(1 << 1)
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index 60cf8226de8..4c5ac7a69e9 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -174,6 +174,16 @@ static int s5pv210_clk_mask1_ctrl(struct clk *clk, int enable)
 	return s5p_gatectrl(S5P_CLK_SRC_MASK1, clk, enable);
 }
 
+static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
+}
+
+static int exynos4_clk_dac_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_DAC_PHY_CONTROL, clk, enable);
+}
+
 static struct clk clk_sclk_hdmi27m = {
 	.name		= "sclk_hdmi27m",
 	.rate		= 27000000,
@@ -334,6 +344,40 @@ static struct clk init_clocks_off[] = {
 		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip0_ctrl,
 		.ctrlbit	= (1 << 16),
+	}, {
+		.name		= "dac",
+		.devname	= "s5p-sdo",
+		.parent		= &clk_hclk_dsys.clk,
+		.enable		= s5pv210_clk_ip1_ctrl,
+		.ctrlbit	= (1 << 10),
+	}, {
+		.name		= "mixer",
+		.devname	= "s5p-mixer",
+		.parent		= &clk_hclk_dsys.clk,
+		.enable		= s5pv210_clk_ip1_ctrl,
+		.ctrlbit	= (1 << 9),
+	}, {
+		.name		= "vp",
+		.devname	= "s5p-mixer",
+		.parent		= &clk_hclk_dsys.clk,
+		.enable		= s5pv210_clk_ip1_ctrl,
+		.ctrlbit	= (1 << 8),
+	}, {
+		.name		= "hdmi",
+		.devname	= "s5pv210-hdmi",
+		.parent		= &clk_hclk_dsys.clk,
+		.enable		= s5pv210_clk_ip1_ctrl,
+		.ctrlbit	= (1 << 11),
+	}, {
+		.name		= "hdmiphy",
+		.devname	= "s5pv210-hdmi",
+		.enable		= exynos4_clk_hdmiphy_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "dacphy",
+		.devname	= "s5p-sdo",
+		.enable		= exynos4_clk_dac_ctrl,
+		.ctrlbit	= (1 << 0),
 	}, {
 		.name		= "otg",
 		.parent		= &clk_hclk_psys.clk,
@@ -605,6 +649,23 @@ static struct clksrc_sources clkset_sclk_mixer = {
 	.nr_sources	= ARRAY_SIZE(clkset_sclk_mixer_list),
 };
 
+static struct clksrc_clk clk_sclk_mixer = {
+	.clk		= {
+		.name		= "sclk_mixer",
+		.enable		= s5pv210_clk_mask0_ctrl,
+		.ctrlbit	= (1 << 1),
+	},
+	.sources = &clkset_sclk_mixer,
+	.reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 1 },
+};
+
+static struct clksrc_clk *sclk_tv[] = {
+	&clk_sclk_dac,
+	&clk_sclk_pixel,
+	&clk_sclk_hdmi,
+	&clk_sclk_mixer,
+};
+
 static struct clk *clkset_sclk_audio0_list[] = {
 	[0] = &clk_ext_xtal_mux,
 	[1] = &clk_pcmcdclk0,
@@ -786,14 +847,6 @@ static struct clksrc_clk clksrcs[] = {
 		.sources = &clkset_uart,
 		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 28, .size = 4 },
 		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 28, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_mixer",
-			.enable		= s5pv210_clk_mask0_ctrl,
-			.ctrlbit	= (1 << 1),
-		},
-		.sources = &clkset_sclk_mixer,
-		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 1 },
 	}, {
 		.clk	= {
 			.name		= "sclk_fimc",
@@ -984,9 +1037,6 @@ static struct clksrc_clk *sysclks[] = {
 	&clk_pclk_psys,
 	&clk_vpllsrc,
 	&clk_sclk_vpll,
-	&clk_sclk_dac,
-	&clk_sclk_pixel,
-	&clk_sclk_hdmi,
 	&clk_mout_dmc0,
 	&clk_sclk_dmc0,
 	&clk_sclk_audio0,
@@ -1071,6 +1121,61 @@ static struct clk_ops s5pv210_epll_ops = {
 	.get_rate = s5p_epll_get_rate,
 };
 
+static u32 vpll_div[][5] = {
+	{  54000000, 3, 53, 3, 0 },
+	{ 108000000, 3, 53, 2, 0 },
+};
+
+static unsigned long s5pv210_vpll_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+
+static int s5pv210_vpll_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int vpll_con;
+	unsigned int i;
+
+	/* Return if nothing changed */
+	if (clk->rate == rate)
+		return 0;
+
+	vpll_con = __raw_readl(S5P_VPLL_CON);
+	vpll_con &= ~(0x1 << 27 |					\
+			PLL90XX_MDIV_MASK << PLL90XX_MDIV_SHIFT |	\
+			PLL90XX_PDIV_MASK << PLL90XX_PDIV_SHIFT |	\
+			PLL90XX_SDIV_MASK << PLL90XX_SDIV_SHIFT);
+
+	for (i = 0; i < ARRAY_SIZE(vpll_div); i++) {
+		if (vpll_div[i][0] == rate) {
+			vpll_con |= vpll_div[i][1] << PLL90XX_PDIV_SHIFT;
+			vpll_con |= vpll_div[i][2] << PLL90XX_MDIV_SHIFT;
+			vpll_con |= vpll_div[i][3] << PLL90XX_SDIV_SHIFT;
+			vpll_con |= vpll_div[i][4] << 27;
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(vpll_div)) {
+		printk(KERN_ERR "%s: Invalid Clock VPLL Frequency\n",
+				__func__);
+		return -EINVAL;
+	}
+
+	__raw_writel(vpll_con, S5P_VPLL_CON);
+
+	/* Wait for VPLL lock */
+	while (!(__raw_readl(S5P_VPLL_CON) & (1 << PLL90XX_LOCKED_SHIFT)))
+		continue;
+
+	clk->rate = rate;
+	return 0;
+}
+static struct clk_ops s5pv210_vpll_ops = {
+	.get_rate = s5pv210_vpll_get_rate,
+	.set_rate = s5pv210_vpll_set_rate,
+};
+
 void __init_or_cpufreq s5pv210_setup_clocks(void)
 {
 	struct clk *xtal_clk;
@@ -1119,6 +1224,7 @@ void __init_or_cpufreq s5pv210_setup_clocks(void)
 	clk_fout_apll.ops = &clk_fout_apll_ops;
 	clk_fout_mpll.rate = mpll;
 	clk_fout_epll.rate = epll;
+	clk_fout_vpll.ops = &s5pv210_vpll_ops;
 	clk_fout_vpll.rate = vpll;
 
 	printk(KERN_INFO "S5PV210: PLL settings, A=%ld, M=%ld, E=%ld V=%ld",
@@ -1164,6 +1270,9 @@ void __init s5pv210_register_clocks(void)
 	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
 		s3c_register_clksrc(sysclks[ptr], 1);
 
+	for (ptr = 0; ptr < ARRAY_SIZE(sclk_tv); ptr++)
+		s3c_register_clksrc(sclk_tv[ptr], 1);
+
 	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
 	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
 
diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c
index 79907ec78d4..6b8cdccbe93 100644
--- a/arch/arm/mach-s5pv210/cpu.c
+++ b/arch/arm/mach-s5pv210/cpu.c
@@ -41,6 +41,7 @@
 #include <plat/keypad-core.h>
 #include <plat/sdhci.h>
 #include <plat/reset.h>
+#include <plat/tv-core.h>
 
 /* Initial IO mappings */
 
@@ -143,6 +144,9 @@ void __init s5pv210_map_io(void)
 
 	/* Use s5pv210-keypad instead of samsung-keypad */
 	samsung_keypad_setname("s5pv210-keypad");
+
+	/* setup TV devices */
+	s5p_hdmi_setname("s5pv210-hdmi");
 }
 
 void __init s5pv210_init_clocks(int xtal)
diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h
index c1da0a7fb18..5e0de3a31f3 100644
--- a/arch/arm/mach-s5pv210/include/mach/irqs.h
+++ b/arch/arm/mach-s5pv210/include/mach/irqs.h
@@ -86,7 +86,7 @@
 #define IRQ_HDMI		S5P_IRQ_VIC2(12)
 #define IRQ_IIC1		S5P_IRQ_VIC2(13)
 #define IRQ_MFC			S5P_IRQ_VIC2(14)
-#define IRQ_TVENC		S5P_IRQ_VIC2(15)
+#define IRQ_SDO			S5P_IRQ_VIC2(15)
 #define IRQ_I2S0		S5P_IRQ_VIC2(16)
 #define IRQ_I2S1		S5P_IRQ_VIC2(17)
 #define IRQ_I2S2		S5P_IRQ_VIC2(18)
diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h
index a420654c2c7..7ff609f1568 100644
--- a/arch/arm/mach-s5pv210/include/mach/map.h
+++ b/arch/arm/mach-s5pv210/include/mach/map.h
@@ -90,6 +90,10 @@
 #define S5PV210_PA_FIMC1		0xFB300000
 #define S5PV210_PA_FIMC2		0xFB400000
 
+#define S5PV210_PA_SDO			0xF9000000
+#define S5PV210_PA_VP			0xF9100000
+#define S5PV210_PA_MIXER		0xF9200000
+#define S5PV210_PA_HDMI			0xFA100000
 #define S5PV210_PA_IIC_HDMIPHY		0xFA900000
 
 /* Compatibiltiy Defines */
@@ -113,6 +117,12 @@
 #define S5P_PA_MIPI_CSIS0		S5PV210_PA_MIPI_CSIS
 #define S5P_PA_MFC			S5PV210_PA_MFC
 #define S5P_PA_IIC_HDMIPHY		S5PV210_PA_IIC_HDMIPHY
+
+#define S5P_PA_SDO			S5PV210_PA_SDO
+#define S5P_PA_VP			S5PV210_PA_VP
+#define S5P_PA_MIXER			S5PV210_PA_MIXER
+#define S5P_PA_HDMI			S5PV210_PA_HDMI
+
 #define S5P_PA_ONENAND			S5PC110_PA_ONENAND
 #define S5P_PA_ONENAND_DMA		S5PC110_PA_ONENAND_DMA
 #define S5P_PA_SDRAM			S5PV210_PA_SDRAM
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
index 78925c51634..032de66fb8b 100644
--- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h
+++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
@@ -144,8 +144,9 @@
 
 #define S5P_OTHERS		S5P_CLKREG(0xE000)
 #define S5P_OM_STAT		S5P_CLKREG(0xE100)
+#define S5P_HDMI_PHY_CONTROL	S5P_CLKREG(0xE804)
 #define S5P_USB_PHY_CONTROL	S5P_CLKREG(0xE80C)
-#define S5P_DAC_CONTROL		S5P_CLKREG(0xE810)
+#define S5P_DAC_PHY_CONTROL	S5P_CLKREG(0xE810)
 #define S5P_MIPI_DPHY_CONTROL(x) S5P_CLKREG(0xE814)
 #define S5P_MIPI_DPHY_ENABLE	(1 << 0)
 #define S5P_MIPI_DPHY_SRESETN	(1 << 1)
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index a554d03b99b..f9241a7a68c 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -98,6 +98,11 @@ config S5P_DEV_CSIS1
 	help
 	  Compile in platform device definitions for MIPI-CSIS channel 1
 
+config S5P_DEV_TV
+	bool
+	help
+	  Compile in platform device definition for TV interface
+
 config S5P_DEV_USB_EHCI
 	bool
 	help
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
index 1dd10dc91e6..181201974b4 100644
--- a/arch/arm/plat-s5p/Makefile
+++ b/arch/arm/plat-s5p/Makefile
@@ -35,5 +35,6 @@ obj-$(CONFIG_S5P_DEV_I2C_HDMIPHY) += dev-i2c-hdmiphy.o
 obj-$(CONFIG_S5P_DEV_ONENAND)	+= dev-onenand.o
 obj-$(CONFIG_S5P_DEV_CSIS0)	+= dev-csis0.o
 obj-$(CONFIG_S5P_DEV_CSIS1)	+= dev-csis1.o
+obj-$(CONFIG_S5P_DEV_TV)	+= dev-tv.o
 obj-$(CONFIG_S5P_DEV_USB_EHCI)	+= dev-ehci.o
 obj-$(CONFIG_S5P_SETUP_MIPIPHY)	+= setup-mipiphy.o
diff --git a/arch/arm/plat-s5p/dev-tv.c b/arch/arm/plat-s5p/dev-tv.c
new file mode 100644
index 00000000000..361a1b63a81
--- /dev/null
+++ b/arch/arm/plat-s5p/dev-tv.c
@@ -0,0 +1,98 @@
+/* linux/arch/arm/plat-s5p/dev-tv.c
+ *
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ * Author: Tomasz Stanislawski <t.stanislaws@samsung.com>
+ *
+ * S5P series device definition for TV device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/dma-mapping.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+/* HDMI interface */
+static struct resource s5p_hdmi_resources[] = {
+	[0] = {
+		.start	= S5P_PA_HDMI,
+		.end	= S5P_PA_HDMI + SZ_1M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_HDMI,
+		.end	= IRQ_HDMI,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s5p_device_hdmi = {
+	.name		= "s5p-hdmi",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s5p_hdmi_resources),
+	.resource	= s5p_hdmi_resources,
+};
+EXPORT_SYMBOL(s5p_device_hdmi);
+
+/* SDO interface */
+static struct resource s5p_sdo_resources[] = {
+	[0] = {
+		.start	= S5P_PA_SDO,
+		.end	= S5P_PA_SDO + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_SDO,
+		.end	= IRQ_SDO,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device s5p_device_sdo = {
+	.name		= "s5p-sdo",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s5p_sdo_resources),
+	.resource	= s5p_sdo_resources,
+};
+EXPORT_SYMBOL(s5p_device_sdo);
+
+/* MIXER */
+static struct resource s5p_mixer_resources[] = {
+	[0] = {
+		.start	= S5P_PA_MIXER,
+		.end	= S5P_PA_MIXER + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+		.name	= "mxr"
+	},
+	[1] = {
+		.start	= S5P_PA_VP,
+		.end	= S5P_PA_VP + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+		.name	= "vp"
+	},
+	[2] = {
+		.start	= IRQ_MIXER,
+		.end	= IRQ_MIXER,
+		.flags	= IORESOURCE_IRQ,
+		.name	= "irq"
+	}
+};
+
+static u64 s5p_tv_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5p_device_mixer = {
+	.name		= "s5p-mixer",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s5p_mixer_resources),
+	.resource	= s5p_mixer_resources,
+	.dev		= {
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.dma_mask = &s5p_tv_dmamask,
+	}
+};
+EXPORT_SYMBOL(s5p_device_mixer);
diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-s5p/include/plat/pll.h
index bf28fadee7a..8b24b366c65 100644
--- a/arch/arm/plat-s5p/include/plat/pll.h
+++ b/arch/arm/plat-s5p/include/plat/pll.h
@@ -46,15 +46,24 @@ static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con,
 	return (unsigned long)fvco;
 }
 
-#define PLL46XX_KDIV_MASK	(0xFFFF)
-#define PLL4650C_KDIV_MASK	(0xFFF)
+/* CON0 bit-fields */
 #define PLL46XX_MDIV_MASK	(0x1FF)
 #define PLL46XX_PDIV_MASK	(0x3F)
 #define PLL46XX_SDIV_MASK	(0x7)
+#define PLL46XX_LOCKED_SHIFT	(29)
 #define PLL46XX_MDIV_SHIFT	(16)
 #define PLL46XX_PDIV_SHIFT	(8)
 #define PLL46XX_SDIV_SHIFT	(0)
 
+/* CON1 bit-fields */
+#define PLL46XX_MRR_MASK	(0x1F)
+#define PLL46XX_MFR_MASK	(0x3F)
+#define PLL46XX_KDIV_MASK	(0xFFFF)
+#define PLL4650C_KDIV_MASK	(0xFFF)
+#define PLL46XX_MRR_SHIFT	(24)
+#define PLL46XX_MFR_SHIFT	(16)
+#define PLL46XX_KDIV_SHIFT	(0)
+
 enum pll46xx_type_t {
 	pll_4600,
 	pll_4650,
@@ -98,6 +107,7 @@ static inline unsigned long s5p_get_pll46xx(unsigned long baseclk,
 #define PLL90XX_PDIV_MASK	(0x3F)
 #define PLL90XX_SDIV_MASK	(0x7)
 #define PLL90XX_KDIV_MASK	(0xffff)
+#define PLL90XX_LOCKED_SHIFT	(29)
 #define PLL90XX_MDIV_SHIFT	(16)
 #define PLL90XX_PDIV_SHIFT	(8)
 #define PLL90XX_SDIV_SHIFT	(0)
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index b15805f4de9..ee5014a7cc9 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -143,6 +143,11 @@ extern struct platform_device s5p_device_fimc3;
 extern struct platform_device s5p_device_mfc;
 extern struct platform_device s5p_device_mfc_l;
 extern struct platform_device s5p_device_mfc_r;
+
+extern struct platform_device s5p_device_hdmi;
+extern struct platform_device s5p_device_mixer;
+extern struct platform_device s5p_device_sdo;
+
 extern struct platform_device s5p_device_mipi_csis0;
 extern struct platform_device s5p_device_mipi_csis1;
 
diff --git a/arch/arm/plat-samsung/include/plat/tv-core.h b/arch/arm/plat-samsung/include/plat/tv-core.h
new file mode 100644
index 00000000000..3bc34f3ce28
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/tv-core.h
@@ -0,0 +1,44 @@
+/*
+ * arch/arm/plat-samsung/include/plat/tv.h
+ *
+ * Copyright 2011 Samsung Electronics Co., Ltd.
+ *	Tomasz Stanislawski <t.stanislaws@samsung.com>
+ *
+ * Samsung TV driver core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SAMSUNG_PLAT_TV_H
+#define __SAMSUNG_PLAT_TV_H __FILE__
+
+/*
+ * These functions are only for use with the core support code, such as
+ * the CPU-specific initialization code.
+ */
+
+/* Re-define device name to differentiate the subsystem in various SoCs. */
+static inline void s5p_hdmi_setname(char *name)
+{
+#ifdef CONFIG_S5P_DEV_TV
+	s5p_device_hdmi.name = name;
+#endif
+}
+
+static inline void s5p_mixer_setname(char *name)
+{
+#ifdef CONFIG_S5P_DEV_TV
+	s5p_device_mixer.name = name;
+#endif
+}
+
+static inline void s5p_sdo_setname(char *name)
+{
+#ifdef CONFIG_S5P_DEV_TV
+	s5p_device_sdo.name = name;
+#endif
+}
+
+#endif /* __SAMSUNG_PLAT_TV_H */
-- 
cgit v1.2.3-18-g5258


From d737cf29bfb60ad5c881a8a43fd4d7b38c2a1ee9 Mon Sep 17 00:00:00 2001
From: Tomasz Stanislawski <t.stanislaws@samsung.com>
Date: Fri, 16 Sep 2011 18:48:32 +0900
Subject: ARM: EXYNOS4: enable TV support on Universal_C210 board

This patch adds platform devices and regulators for TV devices on
Samsung Universal C210 board.

Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/Kconfig               |  2 +
 arch/arm/mach-exynos4/mach-universal_c210.c | 74 +++++++++++++++++++++++++++++
 2 files changed, 76 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index f28e99ce399..f3ca4b114c2 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -186,8 +186,10 @@ config MACH_UNIVERSAL_C210
 	select S3C_DEV_I2C1
 	select S3C_DEV_I2C3
 	select S3C_DEV_I2C5
+	select S5P_DEV_I2C_HDMIPHY
 	select S5P_DEV_MFC
 	select S5P_DEV_ONENAND
+	select S5P_DEV_TV
 	select EXYNOS4_DEV_PD
 	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_I2C1
diff --git a/arch/arm/mach-exynos4/mach-universal_c210.c b/arch/arm/mach-exynos4/mach-universal_c210.c
index 3ca7f3a8c2c..315c5032806 100644
--- a/arch/arm/mach-exynos4/mach-universal_c210.c
+++ b/arch/arm/mach-exynos4/mach-universal_c210.c
@@ -113,6 +113,9 @@ static struct regulator_consumer_supply lp3974_buck1_consumer =
 static struct regulator_consumer_supply lp3974_buck2_consumer =
 	REGULATOR_SUPPLY("vddg3d", NULL);
 
+static struct regulator_consumer_supply lp3974_buck3_consumer =
+	REGULATOR_SUPPLY("vdet", "s5p-sdo");
+
 static struct regulator_init_data lp3974_buck1_data = {
 	.constraints	= {
 		.name		= "VINT_1.1V",
@@ -156,6 +159,8 @@ static struct regulator_init_data lp3974_buck3_data = {
 			.enabled	= 1,
 		},
 	},
+	.num_consumer_supplies = 1,
+	.consumer_supplies = &lp3974_buck3_consumer,
 };
 
 static struct regulator_init_data lp3974_buck4_data = {
@@ -184,6 +189,11 @@ static struct regulator_init_data lp3974_ldo2_data = {
 	},
 };
 
+static struct regulator_consumer_supply lp3974_ldo3_consumer[] = {
+	REGULATOR_SUPPLY("vdd", "exynos4-hdmi"),
+	REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"),
+};
+
 static struct regulator_init_data lp3974_ldo3_data = {
 	.constraints	= {
 		.name		= "VUSB+MIPI_1.1V",
@@ -195,6 +205,12 @@ static struct regulator_init_data lp3974_ldo3_data = {
 			.disabled	= 1,
 		},
 	},
+	.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo3_consumer),
+	.consumer_supplies = lp3974_ldo3_consumer,
+};
+
+static struct regulator_consumer_supply lp3974_ldo4_consumer[] = {
+	REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"),
 };
 
 static struct regulator_init_data lp3974_ldo4_data = {
@@ -208,6 +224,8 @@ static struct regulator_init_data lp3974_ldo4_data = {
 			.disabled	= 1,
 		},
 	},
+	.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo4_consumer),
+	.consumer_supplies = lp3974_ldo4_consumer,
 };
 
 static struct regulator_init_data lp3974_ldo5_data = {
@@ -249,6 +267,10 @@ static struct regulator_init_data lp3974_ldo7_data = {
 	},
 };
 
+static struct regulator_consumer_supply lp3974_ldo8_consumer[] = {
+	REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"),
+};
+
 static struct regulator_init_data lp3974_ldo8_data = {
 	.constraints	= {
 		.name		= "VUSB+VDAC_3.3V",
@@ -260,6 +282,8 @@ static struct regulator_init_data lp3974_ldo8_data = {
 			.disabled	= 1,
 		},
 	},
+	.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo8_consumer),
+	.consumer_supplies = lp3974_ldo8_consumer,
 };
 
 static struct regulator_init_data lp3974_ldo9_data = {
@@ -475,6 +499,34 @@ static struct max8998_platform_data universal_lp3974_pdata = {
 	.wakeup			= true,
 };
 
+static struct regulator_consumer_supply hdmi_fixed_consumer =
+	REGULATOR_SUPPLY("hdmi-en", "exynos4-hdmi");
+
+static struct regulator_init_data hdmi_fixed_voltage_init_data = {
+	.constraints		= {
+		.name		= "HDMI_5V",
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &hdmi_fixed_consumer,
+};
+
+static struct fixed_voltage_config hdmi_fixed_voltage_config = {
+	.supply_name		= "HDMI_EN1",
+	.microvolts		= 5000000,
+	.gpio			= EXYNOS4_GPE0(1),
+	.enable_high		= true,
+	.init_data		= &hdmi_fixed_voltage_init_data,
+};
+
+static struct platform_device hdmi_fixed_voltage = {
+	.name			= "reg-fixed-voltage",
+	.id			= 6,
+	.dev			= {
+		.platform_data	= &hdmi_fixed_voltage_config,
+	},
+};
+
 /* GPIO I2C 5 (PMIC) */
 static struct i2c_board_info i2c5_devs[] __initdata = {
 	{
@@ -743,6 +795,12 @@ static struct platform_device *universal_devices[] __initdata = {
 	&s3c_device_hsmmc3,
 	&s3c_device_i2c3,
 	&s3c_device_i2c5,
+	&s5p_device_i2c_hdmiphy,
+	&hdmi_fixed_voltage,
+	&exynos4_device_pd[PD_TV],
+	&s5p_device_hdmi,
+	&s5p_device_sdo,
+	&s5p_device_mixer,
 
 	/* Universal Devices */
 	&i2c_gpio12,
@@ -763,6 +821,20 @@ static void __init universal_map_io(void)
 	s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
 }
 
+void s5p_tv_setup(void)
+{
+	/* direct HPD to HDMI chip */
+	gpio_request(EXYNOS4_GPX3(7), "hpd-plug");
+
+	gpio_direction_input(EXYNOS4_GPX3(7));
+	s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
+	s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
+
+	/* setup dependencies between TV devices */
+	s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev;
+	s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev;
+}
+
 static void __init universal_reserve(void)
 {
 	s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
@@ -771,6 +843,7 @@ static void __init universal_reserve(void)
 static void __init universal_machine_init(void)
 {
 	universal_sdhci_init();
+	s5p_tv_setup();
 
 	i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));
 	i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
@@ -780,6 +853,7 @@ static void __init universal_machine_init(void)
 	i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
 
 	s3c_i2c5_set_platdata(NULL);
+	s5p_i2c_hdmiphy_set_platdata(NULL);
 	i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
 
 	s5p_fimd0_set_platdata(&universal_lcd_pdata);
-- 
cgit v1.2.3-18-g5258


From b74f2fb5147baea65f554afcc73e3688e49b8112 Mon Sep 17 00:00:00 2001
From: Tomasz Stanislawski <t.stanislaws@samsung.com>
Date: Fri, 16 Sep 2011 18:48:52 +0900
Subject: ARM: S5PV210: enable TV support on GONI board

This patch adds platform devices and regulators for TV devices on
Samsung Goni board.

Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s5pv210/Kconfig     | 1 +
 arch/arm/mach-s5pv210/mach-goni.c | 9 +++++++++
 2 files changed, 10 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index d960090e465..18f3a6815e5 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -94,6 +94,7 @@ config MACH_GONI
 	select S3C_DEV_USB_HSOTG
 	select S5P_DEV_ONENAND
 	select SAMSUNG_DEV_KEYPAD
+	select S5P_DEV_TV
 	select S5PV210_SETUP_FB_24BPP
 	select S5PV210_SETUP_I2C1
 	select S5PV210_SETUP_I2C2
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 85c2d51a095..14578f567c8 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -285,6 +285,7 @@ static struct regulator_consumer_supply goni_ldo5_consumers[] = {
 
 static struct regulator_consumer_supply goni_ldo8_consumers[] = {
 	REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"),
+	REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"),
 };
 
 static struct regulator_consumer_supply goni_ldo11_consumers[] = {
@@ -475,6 +476,10 @@ static struct regulator_consumer_supply buck1_consumer =
 static struct regulator_consumer_supply buck2_consumer =
 	REGULATOR_SUPPLY("vddint", NULL);
 
+static struct regulator_consumer_supply buck3_consumer =
+	REGULATOR_SUPPLY("vdet", "s5p-sdo");
+
+
 static struct regulator_init_data goni_buck1_data = {
 	.constraints	= {
 		.name		= "VARM_1.2V",
@@ -511,6 +516,8 @@ static struct regulator_init_data goni_buck3_data = {
 			.enabled = 1,
 		},
 	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &buck3_consumer,
 };
 
 static struct regulator_init_data goni_buck4_data = {
@@ -812,6 +819,8 @@ static struct platform_device *goni_devices[] __initdata = {
 	&s5p_device_mfc,
 	&s5p_device_mfc_l,
 	&s5p_device_mfc_r,
+	&s5p_device_mixer,
+	&s5p_device_sdo,
 	&s3c_device_i2c0,
 	&s5p_device_fimc0,
 	&s5p_device_fimc1,
-- 
cgit v1.2.3-18-g5258


From 39aefabbc8b3fbe2e339b97c8dac73a895077661 Mon Sep 17 00:00:00 2001
From: Sylwester Nawrocki <s.nawrocki@samsung.com>
Date: Tue, 27 Sep 2011 07:18:55 +0900
Subject: ARM: S5PV210: Add support for NOON010PC30 sensor on GONI board

Add platform data for CIF camera sensor and FIMC platform data
entries for it. Add platform device for s5p-fimc media device
driver and the camera port A I/O pins initialization.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s5pv210/Kconfig     |  1 +
 arch/arm/mach-s5pv210/mach-goni.c | 53 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 54 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 18f3a6815e5..e2d1d9e9a49 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -100,6 +100,7 @@ config MACH_GONI
 	select S5PV210_SETUP_I2C2
 	select S5PV210_SETUP_KEYPAD
 	select S5PV210_SETUP_SDHCI
+	select S5PV210_SETUP_FIMC
 	help
 	  Machine support for Samsung GONI board
 	  S5PC110(MCP) is one of package option of S5PV210
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 14578f567c8..01e4867e25a 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -48,6 +48,11 @@
 #include <plat/s5p-time.h>
 #include <plat/mfc.h>
 #include <plat/regs-fb-v4.h>
+#include <plat/camport.h>
+
+#include <media/v4l2-mediabus.h>
+#include <media/s5p_fimc.h>
+#include <media/noon010pc30.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define GONI_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
@@ -272,6 +277,14 @@ static void __init goni_tsp_init(void)
 	i2c2_devs[0].irq = gpio_to_irq(gpio);
 }
 
+static void goni_camera_init(void)
+{
+	s5pv210_fimc_setup_gpio(S5P_CAMPORT_A);
+
+	/* Set max driver strength on CAM_A_CLKOUT pin. */
+	s5p_gpio_set_drvstr(S5PV210_GPE1(3), S5P_GPIO_DRVSTR_LV4);
+}
+
 /* MAX8998 regulators */
 #if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
 
@@ -808,6 +821,39 @@ static void goni_setup_sdhci(void)
 	s3c_sdhci2_set_platdata(&goni_hsmmc2_data);
 };
 
+static struct noon010pc30_platform_data noon010pc30_pldata = {
+	.clk_rate	= 16000000UL,
+	.gpio_nreset	= S5PV210_GPB(2), /* CAM_CIF_NRST */
+	.gpio_nstby	= S5PV210_GPB(0), /* CAM_CIF_NSTBY */
+};
+
+static struct i2c_board_info noon010pc30_board_info = {
+	I2C_BOARD_INFO("NOON010PC30", 0x60 >> 1),
+	.platform_data = &noon010pc30_pldata,
+};
+
+static struct s5p_fimc_isp_info goni_camera_sensors[] = {
+	{
+		.mux_id		= 0,
+		.flags		= V4L2_MBUS_PCLK_SAMPLE_FALLING |
+				  V4L2_MBUS_VSYNC_ACTIVE_LOW,
+		.bus_type	= FIMC_ITU_601,
+		.board_info	= &noon010pc30_board_info,
+		.i2c_bus_num	= 0,
+		.clk_frequency	= 16000000UL,
+	},
+};
+
+struct s5p_platform_fimc goni_fimc_md_platdata __initdata = {
+	.isp_info	= goni_camera_sensors,
+	.num_clients	= ARRAY_SIZE(goni_camera_sensors),
+};
+
+struct platform_device s5p_device_fimc_md = {
+	.name		= "s5p-fimc-md",
+	.id		= -1,
+};
+
 static struct platform_device *goni_devices[] __initdata = {
 	&s3c_device_fb,
 	&s5p_device_onenand,
@@ -825,6 +871,7 @@ static struct platform_device *goni_devices[] __initdata = {
 	&s5p_device_fimc0,
 	&s5p_device_fimc1,
 	&s5p_device_fimc2,
+	&s5p_device_fimc_md,
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc1,
 	&s3c_device_hsmmc2,
@@ -893,6 +940,12 @@ static void __init goni_machine_init(void)
 	/* FB */
 	s3c_fb_set_platdata(&goni_lcd_pdata);
 
+	/* FIMC */
+	s3c_set_platdata(&goni_fimc_md_platdata, sizeof(goni_fimc_md_platdata),
+			 &s5p_device_fimc_md);
+
+	goni_camera_init();
+
 	/* SPI */
 	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
 
-- 
cgit v1.2.3-18-g5258


From 0513218222d15e4c3aad20747d21d4007b1c6a95 Mon Sep 17 00:00:00 2001
From: Sylwester Nawrocki <s.nawrocki@samsung.com>
Date: Tue, 27 Sep 2011 07:18:55 +0900
Subject: ARM: S5PV210: Add support for M-5MOLS image sensor on UNIVERSAL_C210

Add voltage regulator definitions for M-5MOLS camera, platform data
definition for the sensor and MIPI-CSI receiver drivers.
Add CAM power domain dependencies for FIMC and CSIS devices.
Define required I2C0 bus timings. Setup camera port A GPIO.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/Kconfig               |   3 +
 arch/arm/mach-exynos4/mach-universal_c210.c | 206 ++++++++++++++++++++++++++--
 2 files changed, 201 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index f3ca4b114c2..13fc721f8e9 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -179,6 +179,7 @@ config MACH_UNIVERSAL_C210
 	select S5P_DEV_FIMC1
 	select S5P_DEV_FIMC2
 	select S5P_DEV_FIMC3
+	select S5P_DEV_CSIS0
 	select S5P_DEV_FIMD0
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC2
@@ -196,6 +197,8 @@ config MACH_UNIVERSAL_C210
 	select EXYNOS4_SETUP_I2C3
 	select EXYNOS4_SETUP_I2C5
 	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS4_SETUP_FIMC
+	select S5P_SETUP_MIPIPHY
 	help
 	  Machine support for Samsung Mobile Universal S5PC210 Reference
 	  Board.
diff --git a/arch/arm/mach-exynos4/mach-universal_c210.c b/arch/arm/mach-exynos4/mach-universal_c210.c
index 315c5032806..18cf5c7cf56 100644
--- a/arch/arm/mach-exynos4/mach-universal_c210.c
+++ b/arch/arm/mach-exynos4/mach-universal_c210.c
@@ -37,9 +37,16 @@
 #include <plat/sdhci.h>
 #include <plat/pd.h>
 #include <plat/regs-fb-v4.h>
+#include <plat/fimc-core.h>
+#include <plat/camport.h>
+#include <plat/mipi_csis.h>
 
 #include <mach/map.h>
 
+#include <media/v4l2-mediabus.h>
+#include <media/s5p_fimc.h>
+#include <media/m5mols.h>
+
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define UNIVERSAL_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
@@ -192,6 +199,7 @@ static struct regulator_init_data lp3974_ldo2_data = {
 static struct regulator_consumer_supply lp3974_ldo3_consumer[] = {
 	REGULATOR_SUPPLY("vdd", "exynos4-hdmi"),
 	REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"),
+	REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"),
 };
 
 static struct regulator_init_data lp3974_ldo3_data = {
@@ -254,6 +262,10 @@ static struct regulator_init_data lp3974_ldo6_data = {
 	},
 };
 
+static struct regulator_consumer_supply lp3974_ldo7_consumer[] = {
+	REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"),
+};
+
 static struct regulator_init_data lp3974_ldo7_data = {
 	.constraints	= {
 		.name		= "VLCD+VMIPI_1.8V",
@@ -265,6 +277,8 @@ static struct regulator_init_data lp3974_ldo7_data = {
 			.disabled	= 1,
 		},
 	},
+	.num_consumer_supplies	= ARRAY_SIZE(lp3974_ldo7_consumer),
+	.consumer_supplies	= lp3974_ldo7_consumer,
 };
 
 static struct regulator_consumer_supply lp3974_ldo8_consumer[] = {
@@ -313,6 +327,9 @@ static struct regulator_init_data lp3974_ldo10_data = {
 	},
 };
 
+static struct regulator_consumer_supply lp3974_ldo11_consumer =
+	REGULATOR_SUPPLY("dig_28", "0-001f");
+
 static struct regulator_init_data lp3974_ldo11_data = {
 	.constraints	= {
 		.name		= "CAM_AF_3.3V",
@@ -324,6 +341,8 @@ static struct regulator_init_data lp3974_ldo11_data = {
 			.disabled	= 1,
 		},
 	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &lp3974_ldo11_consumer,
 };
 
 static struct regulator_init_data lp3974_ldo12_data = {
@@ -352,6 +371,9 @@ static struct regulator_init_data lp3974_ldo13_data = {
 	},
 };
 
+static struct regulator_consumer_supply lp3974_ldo14_consumer =
+	REGULATOR_SUPPLY("dig_18", "0-001f");
+
 static struct regulator_init_data lp3974_ldo14_data = {
 	.constraints	= {
 		.name		= "CAM_I_HOST_1.8V",
@@ -363,8 +385,14 @@ static struct regulator_init_data lp3974_ldo14_data = {
 			.disabled	= 1,
 		},
 	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &lp3974_ldo14_consumer,
 };
 
+
+static struct regulator_consumer_supply lp3974_ldo15_consumer =
+	REGULATOR_SUPPLY("dig_12", "0-001f");
+
 static struct regulator_init_data lp3974_ldo15_data = {
 	.constraints	= {
 		.name		= "CAM_S_DIG+FM33_CORE_1.2V",
@@ -376,6 +404,12 @@ static struct regulator_init_data lp3974_ldo15_data = {
 			.disabled	= 1,
 		},
 	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &lp3974_ldo15_consumer,
+};
+
+static struct regulator_consumer_supply lp3974_ldo16_consumer[] = {
+	REGULATOR_SUPPLY("a_sensor", "0-001f"),
 };
 
 static struct regulator_init_data lp3974_ldo16_data = {
@@ -389,6 +423,8 @@ static struct regulator_init_data lp3974_ldo16_data = {
 			.disabled	= 1,
 		},
 	},
+	.num_consumer_supplies	= ARRAY_SIZE(lp3974_ldo16_consumer),
+	.consumer_supplies	= lp3974_ldo16_consumer,
 };
 
 static struct regulator_init_data lp3974_ldo17_data = {
@@ -499,6 +535,15 @@ static struct max8998_platform_data universal_lp3974_pdata = {
 	.wakeup			= true,
 };
 
+
+enum fixed_regulator_id {
+	FIXED_REG_ID_MMC0,
+	FIXED_REG_ID_HDMI_5V,
+	FIXED_REG_ID_CAM_S_IF,
+	FIXED_REG_ID_CAM_I_CORE,
+	FIXED_REG_ID_CAM_VT_DIO,
+};
+
 static struct regulator_consumer_supply hdmi_fixed_consumer =
 	REGULATOR_SUPPLY("hdmi-en", "exynos4-hdmi");
 
@@ -521,7 +566,7 @@ static struct fixed_voltage_config hdmi_fixed_voltage_config = {
 
 static struct platform_device hdmi_fixed_voltage = {
 	.name			= "reg-fixed-voltage",
-	.id			= 6,
+	.id			= FIXED_REG_ID_HDMI_5V,
 	.dev			= {
 		.platform_data	= &hdmi_fixed_voltage_config,
 	},
@@ -628,6 +673,11 @@ static void __init universal_touchkey_init(void)
 	gpio_direction_output(gpio, 1);
 }
 
+static struct s3c2410_platform_i2c universal_i2c0_platdata __initdata = {
+	.frequency	= 300 * 1000,
+	.sda_delay	= 200,
+};
+
 /* GPIO KEYS */
 static struct gpio_keys_button universal_gpio_keys_tables[] = {
 	{
@@ -713,7 +763,7 @@ static struct fixed_voltage_config mmc0_fixed_voltage_config = {
 
 static struct platform_device mmc0_fixed_voltage = {
 	.name			= "reg-fixed-voltage",
-	.id			= 0,
+	.id			= FIXED_REG_ID_MMC0,
 	.dev			= {
 		.platform_data	= &mmc0_fixed_voltage_config,
 	},
@@ -747,11 +797,6 @@ static void __init universal_sdhci_init(void)
 	s3c_sdhci3_set_platdata(&universal_hsmmc3_data);
 }
 
-/* I2C0 */
-static struct i2c_board_info i2c0_devs[] __initdata = {
-	/* Camera, To be updated */
-};
-
 /* I2C1 */
 static struct i2c_board_info i2c1_devs[] __initdata = {
 	/* Gyro, To be updated */
@@ -783,8 +828,139 @@ static struct s3c_fb_platdata universal_lcd_pdata __initdata = {
 	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
 };
 
+static struct regulator_consumer_supply cam_i_core_supply =
+	REGULATOR_SUPPLY("core", "0-001f");
+
+static struct regulator_init_data cam_i_core_reg_init_data = {
+	.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
+	.num_consumer_supplies = 1,
+	.consumer_supplies = &cam_i_core_supply,
+};
+
+static struct fixed_voltage_config cam_i_core_fixed_voltage_cfg = {
+	.supply_name	= "CAM_I_CORE_1.2V",
+	.microvolts	= 1200000,
+	.gpio		= EXYNOS4_GPE2(2),	/* CAM_8M_CORE_EN */
+	.enable_high	= 1,
+	.init_data	= &cam_i_core_reg_init_data,
+};
+
+static struct platform_device cam_i_core_fixed_reg_dev = {
+	.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_I_CORE,
+	.dev = { .platform_data	= &cam_i_core_fixed_voltage_cfg },
+};
+
+static struct regulator_consumer_supply cam_s_if_supply =
+	REGULATOR_SUPPLY("d_sensor", "0-001f");
+
+static struct regulator_init_data cam_s_if_reg_init_data = {
+	.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
+	.num_consumer_supplies = 1,
+	.consumer_supplies = &cam_s_if_supply,
+};
+
+static struct fixed_voltage_config cam_s_if_fixed_voltage_cfg = {
+	.supply_name	= "CAM_S_IF_1.8V",
+	.microvolts	= 1800000,
+	.gpio		= EXYNOS4_GPE3(0),	/* CAM_PWR_EN1 */
+	.enable_high	= 1,
+	.init_data	= &cam_s_if_reg_init_data,
+};
+
+static struct platform_device cam_s_if_fixed_reg_dev = {
+	.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_S_IF,
+	.dev = { .platform_data	= &cam_s_if_fixed_voltage_cfg },
+};
+
+static struct s5p_platform_mipi_csis mipi_csis_platdata = {
+	.clk_rate	= 166000000UL,
+	.lanes		= 2,
+	.alignment	= 32,
+	.hs_settle	= 12,
+	.phy_enable	= s5p_csis_phy_enable,
+};
+
+#define GPIO_CAM_LEVEL_EN(n)	EXYNOS4_GPE4(n + 3)
+#define GPIO_CAM_8M_ISP_INT	EXYNOS4_GPX1(5)	/* XEINT_13 */
+#define GPIO_CAM_MEGA_nRST	EXYNOS4_GPE2(5)
+
+static int m5mols_set_power(struct device *dev, int on)
+{
+	gpio_set_value(GPIO_CAM_LEVEL_EN(1), !on);
+	gpio_set_value(GPIO_CAM_LEVEL_EN(2), !!on);
+	return 0;
+}
+
+static struct m5mols_platform_data m5mols_platdata = {
+	.gpio_reset	= GPIO_CAM_MEGA_nRST,
+	.reset_polarity	= 0,
+	.set_power	= m5mols_set_power,
+};
+
+static struct i2c_board_info m5mols_board_info = {
+	I2C_BOARD_INFO("M5MOLS", 0x1F),
+	.platform_data = &m5mols_platdata,
+};
+
+static struct s5p_fimc_isp_info universal_camera_sensors[] = {
+	{
+		.mux_id		= 0,
+		.flags		= V4L2_MBUS_PCLK_SAMPLE_FALLING |
+				  V4L2_MBUS_VSYNC_ACTIVE_LOW,
+		.bus_type	= FIMC_MIPI_CSI2,
+		.board_info	= &m5mols_board_info,
+		.i2c_bus_num	= 0,
+		.clk_frequency	= 21600000UL,
+		.csi_data_align	= 32,
+	},
+};
+
+static struct s5p_platform_fimc fimc_md_platdata = {
+	.isp_info	= universal_camera_sensors,
+	.num_clients	= ARRAY_SIZE(universal_camera_sensors),
+};
+
+struct platform_device s5p_device_fimc_md = {
+	.name	= "s5p-fimc-md",
+	.id	= -1,
+};
+
+static struct gpio universal_camera_gpios[] = {
+	{ GPIO_CAM_LEVEL_EN(1),	GPIOF_OUT_INIT_HIGH, "CAM_LVL_EN1" },
+	{ GPIO_CAM_LEVEL_EN(2),	GPIOF_OUT_INIT_LOW,  "CAM_LVL_EN2" },
+	{ GPIO_CAM_8M_ISP_INT,	GPIOF_IN,            "8M_ISP_INT"  },
+	{ GPIO_CAM_MEGA_nRST,	GPIOF_OUT_INIT_LOW,  "CAM_8M_NRST" },
+};
+
+static void universal_camera_init(void)
+{
+	s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata),
+			 &s5p_device_mipi_csis0);
+	s3c_set_platdata(&fimc_md_platdata,  sizeof(fimc_md_platdata),
+			 &s5p_device_fimc_md);
+
+	if (gpio_request_array(universal_camera_gpios,
+			       ARRAY_SIZE(universal_camera_gpios))) {
+		pr_err("%s: GPIO request failed\n", __func__);
+		return;
+	}
+
+	if (!s3c_gpio_cfgpin(GPIO_CAM_8M_ISP_INT, S3C_GPIO_SFN(0xf)))
+		m5mols_board_info.irq = gpio_to_irq(GPIO_CAM_8M_ISP_INT);
+	else
+		pr_err("Failed to configure 8M_ISP_INT GPIO\n");
+
+	/* Free GPIOs controlled directly by the sensor drivers. */
+	gpio_free(GPIO_CAM_MEGA_nRST);
+	gpio_free(GPIO_CAM_8M_ISP_INT);
+
+	if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A))
+		pr_err("Camera port A setup failed\n");
+}
+
 static struct platform_device *universal_devices[] __initdata = {
 	/* Samsung Platform Devices */
+	&s5p_device_mipi_csis0,
 	&s5p_device_fimc0,
 	&s5p_device_fimc1,
 	&s5p_device_fimc2,
@@ -793,6 +969,7 @@ static struct platform_device *universal_devices[] __initdata = {
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc2,
 	&s3c_device_hsmmc3,
+	&s3c_device_i2c0,
 	&s3c_device_i2c3,
 	&s3c_device_i2c5,
 	&s5p_device_i2c_hdmiphy,
@@ -812,6 +989,10 @@ static struct platform_device *universal_devices[] __initdata = {
 	&s5p_device_mfc_r,
 	&exynos4_device_pd[PD_MFC],
 	&exynos4_device_pd[PD_LCD0],
+	&exynos4_device_pd[PD_CAM],
+	&cam_i_core_fixed_reg_dev,
+	&cam_s_if_fixed_reg_dev,
+	&s5p_device_fimc_md,
 };
 
 static void __init universal_map_io(void)
@@ -845,7 +1026,7 @@ static void __init universal_machine_init(void)
 	universal_sdhci_init();
 	s5p_tv_setup();
 
-	i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));
+	s3c_i2c0_set_platdata(&universal_i2c0_platdata);
 	i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
 
 	universal_tsp_init();
@@ -862,10 +1043,19 @@ static void __init universal_machine_init(void)
 	i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs,
 			ARRAY_SIZE(i2c_gpio12_devs));
 
+	universal_camera_init();
+
 	/* Last */
 	platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices));
+
 	s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
 	s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
+
+	s5p_device_fimc0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+	s5p_device_fimc1.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+	s5p_device_fimc2.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+	s5p_device_fimc3.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+	s5p_device_mipi_csis0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
 }
 
 MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
-- 
cgit v1.2.3-18-g5258


From 0dba4dc4d0bf2bd469b1ae7eae0a6ab26624bfe9 Mon Sep 17 00:00:00 2001
From: Jongpill Lee <boyko.lee@samsung.com>
Date: Tue, 27 Sep 2011 07:22:11 +0900
Subject: ARM: EXYNOS4: Modify PMU register setting function

This patch modifies PMU register setting function
to support the other EXYNOS4 SoCs.

Signed-off-by: Jongpill Lee <boyko.lee@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/include/mach/pmu.h      |   7 +
 arch/arm/mach-exynos4/include/mach/regs-pmu.h |   1 -
 arch/arm/mach-exynos4/pmu.c                   | 239 ++++++++++----------------
 3 files changed, 96 insertions(+), 151 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/include/mach/pmu.h b/arch/arm/mach-exynos4/include/mach/pmu.h
index a952904b010..632dd563013 100644
--- a/arch/arm/mach-exynos4/include/mach/pmu.h
+++ b/arch/arm/mach-exynos4/include/mach/pmu.h
@@ -13,6 +13,8 @@
 #ifndef __ASM_ARCH_PMU_H
 #define __ASM_ARCH_PMU_H __FILE__
 
+#define PMU_TABLE_END	NULL
+
 enum sys_powerdown {
 	SYS_AFTR,
 	SYS_LPA,
@@ -20,6 +22,11 @@ enum sys_powerdown {
 	NUM_SYS_POWERDOWN,
 };
 
+struct exynos4_pmu_conf {
+	void __iomem *reg;
+	unsigned int val[NUM_SYS_POWERDOWN];
+};
+
 extern void exynos4_sys_powerdown_conf(enum sys_powerdown mode);
 
 #endif /* __ASM_ARCH_PMU_H */
diff --git a/arch/arm/mach-exynos4/include/mach/regs-pmu.h b/arch/arm/mach-exynos4/include/mach/regs-pmu.h
index 125ced2ad2f..f8c7360abff 100644
--- a/arch/arm/mach-exynos4/include/mach/regs-pmu.h
+++ b/arch/arm/mach-exynos4/include/mach/regs-pmu.h
@@ -27,7 +27,6 @@
 #define S5P_USE_STANDBY_WFI1			(1 << 17)
 #define S5P_USE_STANDBY_WFE0			(1 << 24)
 #define S5P_USE_STANDBY_WFE1			(1 << 25)
-#define S5P_USE_MASK				((0x3 << 16) | (0x3 << 24))
 
 #define S5P_SWRESET				S5P_PMUREG(0x0400)
 
diff --git a/arch/arm/mach-exynos4/pmu.c b/arch/arm/mach-exynos4/pmu.c
index 7ea9eb2a20d..02bfa0d1bb9 100644
--- a/arch/arm/mach-exynos4/pmu.c
+++ b/arch/arm/mach-exynos4/pmu.c
@@ -16,160 +16,99 @@
 #include <mach/regs-clock.h>
 #include <mach/pmu.h>
 
-static void __iomem *sys_powerdown_reg[] = {
-	S5P_ARM_CORE0_LOWPWR,
-	S5P_DIS_IRQ_CORE0,
-	S5P_DIS_IRQ_CENTRAL0,
-	S5P_ARM_CORE1_LOWPWR,
-	S5P_DIS_IRQ_CORE1,
-	S5P_DIS_IRQ_CENTRAL1,
-	S5P_ARM_COMMON_LOWPWR,
-	S5P_L2_0_LOWPWR,
-	S5P_L2_1_LOWPWR,
-	S5P_CMU_ACLKSTOP_LOWPWR,
-	S5P_CMU_SCLKSTOP_LOWPWR,
-	S5P_CMU_RESET_LOWPWR,
-	S5P_APLL_SYSCLK_LOWPWR,
-	S5P_MPLL_SYSCLK_LOWPWR,
-	S5P_VPLL_SYSCLK_LOWPWR,
-	S5P_EPLL_SYSCLK_LOWPWR,
-	S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR,
-	S5P_CMU_RESET_GPSALIVE_LOWPWR,
-	S5P_CMU_CLKSTOP_CAM_LOWPWR,
-	S5P_CMU_CLKSTOP_TV_LOWPWR,
-	S5P_CMU_CLKSTOP_MFC_LOWPWR,
-	S5P_CMU_CLKSTOP_G3D_LOWPWR,
-	S5P_CMU_CLKSTOP_LCD0_LOWPWR,
-	S5P_CMU_CLKSTOP_LCD1_LOWPWR,
-	S5P_CMU_CLKSTOP_MAUDIO_LOWPWR,
-	S5P_CMU_CLKSTOP_GPS_LOWPWR,
-	S5P_CMU_RESET_CAM_LOWPWR,
-	S5P_CMU_RESET_TV_LOWPWR,
-	S5P_CMU_RESET_MFC_LOWPWR,
-	S5P_CMU_RESET_G3D_LOWPWR,
-	S5P_CMU_RESET_LCD0_LOWPWR,
-	S5P_CMU_RESET_LCD1_LOWPWR,
-	S5P_CMU_RESET_MAUDIO_LOWPWR,
-	S5P_CMU_RESET_GPS_LOWPWR,
-	S5P_TOP_BUS_LOWPWR,
-	S5P_TOP_RETENTION_LOWPWR,
-	S5P_TOP_PWR_LOWPWR,
-	S5P_LOGIC_RESET_LOWPWR,
-	S5P_ONENAND_MEM_LOWPWR,
-	S5P_MODIMIF_MEM_LOWPWR,
-	S5P_G2D_ACP_MEM_LOWPWR,
-	S5P_USBOTG_MEM_LOWPWR,
-	S5P_HSMMC_MEM_LOWPWR,
-	S5P_CSSYS_MEM_LOWPWR,
-	S5P_SECSS_MEM_LOWPWR,
-	S5P_PCIE_MEM_LOWPWR,
-	S5P_SATA_MEM_LOWPWR,
-	S5P_PAD_RETENTION_DRAM_LOWPWR,
-	S5P_PAD_RETENTION_MAUDIO_LOWPWR,
-	S5P_PAD_RETENTION_GPIO_LOWPWR,
-	S5P_PAD_RETENTION_UART_LOWPWR,
-	S5P_PAD_RETENTION_MMCA_LOWPWR,
-	S5P_PAD_RETENTION_MMCB_LOWPWR,
-	S5P_PAD_RETENTION_EBIA_LOWPWR,
-	S5P_PAD_RETENTION_EBIB_LOWPWR,
-	S5P_PAD_RETENTION_ISOLATION_LOWPWR,
-	S5P_PAD_RETENTION_ALV_SEL_LOWPWR,
-	S5P_XUSBXTI_LOWPWR,
-	S5P_XXTI_LOWPWR,
-	S5P_EXT_REGULATOR_LOWPWR,
-	S5P_GPIO_MODE_LOWPWR,
-	S5P_GPIO_MODE_MAUDIO_LOWPWR,
-	S5P_CAM_LOWPWR,
-	S5P_TV_LOWPWR,
-	S5P_MFC_LOWPWR,
-	S5P_G3D_LOWPWR,
-	S5P_LCD0_LOWPWR,
-	S5P_LCD1_LOWPWR,
-	S5P_MAUDIO_LOWPWR,
-	S5P_GPS_LOWPWR,
-	S5P_GPS_ALIVE_LOWPWR,
-};
+static struct exynos4_pmu_conf *exynos4_pmu_config;
 
-static const unsigned int sys_powerdown_val[][NUM_SYS_POWERDOWN] = {
-	/* { AFTR, LPA, SLEEP }*/
-	{ 0, 0, 2 },	/* ARM_CORE0 */
-	{ 0, 0, 0 },	/* ARM_DIS_IRQ_CORE0 */
-	{ 0, 0, 0 },	/* ARM_DIS_IRQ_CENTRAL0 */
-	{ 0, 0, 2 },	/* ARM_CORE1 */
-	{ 0, 0, 0 },	/* ARM_DIS_IRQ_CORE1 */
-	{ 0, 0, 0 },	/* ARM_DIS_IRQ_CENTRAL1 */
-	{ 0, 0, 2 },	/* ARM_COMMON */
-	{ 2, 2, 3 },	/* ARM_CPU_L2_0 */
-	{ 2, 2, 3 },	/* ARM_CPU_L2_1 */
-	{ 1, 0, 0 },	/* CMU_ACLKSTOP */
-	{ 1, 0, 0 },	/* CMU_SCLKSTOP */
-	{ 1, 1, 0 },	/* CMU_RESET */
-	{ 1, 0, 0 },	/* APLL_SYSCLK */
-	{ 1, 0, 0 },	/* MPLL_SYSCLK */
-	{ 1, 0, 0 },	/* VPLL_SYSCLK */
-	{ 1, 1, 0 },	/* EPLL_SYSCLK */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_GPS_ALIVE */
-	{ 1, 1, 0 },	/* CMU_RESET_GPS_ALIVE */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_CAM */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_TV */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_MFC */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_G3D */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_LCD0 */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_LCD1 */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_MAUDIO */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_GPS */
-	{ 1, 1, 0 },	/* CMU_RESET_CAM */
-	{ 1, 1, 0 },	/* CMU_RESET_TV */
-	{ 1, 1, 0 },	/* CMU_RESET_MFC */
-	{ 1, 1, 0 },	/* CMU_RESET_G3D */
-	{ 1, 1, 0 },	/* CMU_RESET_LCD0 */
-	{ 1, 1, 0 },	/* CMU_RESET_LCD1 */
-	{ 1, 1, 0 },	/* CMU_RESET_MAUDIO */
-	{ 1, 1, 0 },	/* CMU_RESET_GPS */
-	{ 3, 0, 0 },	/* TOP_BUS */
-	{ 1, 0, 1 },	/* TOP_RETENTION */
-	{ 3, 0, 3 },	/* TOP_PWR */
-	{ 1, 1, 0 },	/* LOGIC_RESET */
-	{ 3, 0, 0 },	/* ONENAND_MEM */
-	{ 3, 0, 0 },	/* MODIMIF_MEM */
-	{ 3, 0, 0 },	/* G2D_ACP_MEM */
-	{ 3, 0, 0 },	/* USBOTG_MEM */
-	{ 3, 0, 0 },	/* HSMMC_MEM */
-	{ 3, 0, 0 },	/* CSSYS_MEM */
-	{ 3, 0, 0 },	/* SECSS_MEM */
-	{ 3, 0, 0 },	/* PCIE_MEM */
-	{ 3, 0, 0 },	/* SATA_MEM */
-	{ 1, 0, 0 },	/* PAD_RETENTION_DRAM */
-	{ 1, 1, 0 },	/* PAD_RETENTION_MAUDIO */
-	{ 1, 0, 0 },	/* PAD_RETENTION_GPIO */
-	{ 1, 0, 0 },	/* PAD_RETENTION_UART */
-	{ 1, 0, 0 },	/* PAD_RETENTION_MMCA */
-	{ 1, 0, 0 },	/* PAD_RETENTION_MMCB */
-	{ 1, 0, 0 },	/* PAD_RETENTION_EBIA */
-	{ 1, 0, 0 },	/* PAD_RETENTION_EBIB */
-	{ 1, 0, 0 },	/* PAD_RETENTION_ISOLATION */
-	{ 1, 0, 0 },	/* PAD_RETENTION_ALV_SEL */
-	{ 1, 1, 0 },	/* XUSBXTI */
-	{ 1, 1, 0 },	/* XXTI */
-	{ 1, 1, 0 },	/* EXT_REGULATOR */
-	{ 1, 0, 0 },	/* GPIO_MODE */
-	{ 1, 1, 0 },	/* GPIO_MODE_MAUDIO */
-	{ 7, 0, 0 },	/* CAM */
-	{ 7, 0, 0 },	/* TV */
-	{ 7, 0, 0 },	/* MFC */
-	{ 7, 0, 0 },	/* G3D */
-	{ 7, 0, 0 },	/* LCD0 */
-	{ 7, 0, 0 },	/* LCD1 */
-	{ 7, 7, 0 },	/* MAUDIO */
-	{ 7, 0, 0 },	/* GPS */
-	{ 7, 0, 0 },	/* GPS_ALIVE */
+static struct exynos4_pmu_conf exynos4210_pmu_config[] = {
+	/* { .reg = address, .val = { AFTR, LPA, SLEEP } */
+	{ S5P_ARM_CORE0_LOWPWR,			{ 0x0, 0x0, 0x2 } },
+	{ S5P_DIS_IRQ_CORE0,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_CENTRAL0,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_ARM_CORE1_LOWPWR,			{ 0x0, 0x0, 0x2 } },
+	{ S5P_DIS_IRQ_CORE1,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_CENTRAL1,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_ARM_COMMON_LOWPWR,		{ 0x0, 0x0, 0x2 } },
+	{ S5P_L2_0_LOWPWR,			{ 0x2, 0x2, 0x3 } },
+	{ S5P_L2_1_LOWPWR,			{ 0x2, 0x2, 0x3 } },
+	{ S5P_CMU_ACLKSTOP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_SCLKSTOP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_LOWPWR,			{ 0x1, 0x1, 0x0 } },
+	{ S5P_APLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_MPLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_VPLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_EPLL_SYSCLK_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR,	{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_GPSALIVE_LOWPWR,	{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_CAM_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_TV_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_MFC_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_G3D_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_LCD0_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_LCD1_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_MAUDIO_LOWPWR,	{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_GPS_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_CAM_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_TV_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_MFC_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_G3D_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_LCD0_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_LCD1_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_MAUDIO_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_GPS_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_TOP_BUS_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_TOP_RETENTION_LOWPWR,		{ 0x1, 0x0, 0x1 } },
+	{ S5P_TOP_PWR_LOWPWR,			{ 0x3, 0x0, 0x3 } },
+	{ S5P_LOGIC_RESET_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_ONENAND_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_MODIMIF_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_G2D_ACP_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_USBOTG_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_HSMMC_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_CSSYS_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_SECSS_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_PCIE_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_SATA_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_DRAM_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_MAUDIO_LOWPWR,	{ 0x1, 0x1, 0x0 } },
+	{ S5P_PAD_RETENTION_GPIO_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_UART_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_MMCA_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_MMCB_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_EBIA_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_EBIB_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_ISOLATION_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_ALV_SEL_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_XUSBXTI_LOWPWR,			{ 0x1, 0x1, 0x0 } },
+	{ S5P_XXTI_LOWPWR,			{ 0x1, 0x1, 0x0 } },
+	{ S5P_EXT_REGULATOR_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_GPIO_MODE_LOWPWR,			{ 0x1, 0x0, 0x0 } },
+	{ S5P_GPIO_MODE_MAUDIO_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CAM_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_TV_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_MFC_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_G3D_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_LCD0_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_LCD1_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_MAUDIO_LOWPWR,			{ 0x7, 0x7, 0x0 } },
+	{ S5P_GPS_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_GPS_ALIVE_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ PMU_TABLE_END,},
 };
 
 void exynos4_sys_powerdown_conf(enum sys_powerdown mode)
 {
-	unsigned int count = ARRAY_SIZE(sys_powerdown_reg);
+	unsigned int i;
+
+	for (i = 0; (exynos4_pmu_config[i].reg != PMU_TABLE_END) ; i++)
+		__raw_writel(exynos4_pmu_config[i].val[mode],
+				exynos4_pmu_config[i].reg);
+}
+
+static int __init exynos4_pmu_init(void)
+{
+	exynos4_pmu_config = exynos4210_pmu_config;
+
+	pr_info("EXYNOS4210 PMU Initialize\n");
 
-	for (; count > 0; count--)
-		__raw_writel(sys_powerdown_val[count - 1][mode],
-				sys_powerdown_reg[count - 1]);
+	return 0;
 }
+arch_initcall(exynos4_pmu_init);
-- 
cgit v1.2.3-18-g5258


From 9a94296cb42727ccff49d13dca947bed14746f07 Mon Sep 17 00:00:00 2001
From: Jongpill Lee <boyko.lee@samsung.com>
Date: Tue, 27 Sep 2011 07:24:58 +0900
Subject: ARM: EXYNOS4: Add PMU register definition for EXYNOS4212

Signed-off-by: Jongpill Lee <boyko.lee@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/include/mach/regs-pmu.h | 69 ++++++++++++++++++++++-----
 1 file changed, 58 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/include/mach/regs-pmu.h b/arch/arm/mach-exynos4/include/mach/regs-pmu.h
index f8c7360abff..4fff8e938fe 100644
--- a/arch/arm/mach-exynos4/include/mach/regs-pmu.h
+++ b/arch/arm/mach-exynos4/include/mach/regs-pmu.h
@@ -25,8 +25,10 @@
 
 #define S5P_USE_STANDBY_WFI0			(1 << 16)
 #define S5P_USE_STANDBY_WFI1			(1 << 17)
+#define S5P_USE_STANDBYWFI_ISP_ARM		(1 << 18)
 #define S5P_USE_STANDBY_WFE0			(1 << 24)
 #define S5P_USE_STANDBY_WFE1			(1 << 25)
+#define S5P_USE_STANDBYWFE_ISP_ARM		(1 << 26)
 
 #define S5P_SWRESET				S5P_PMUREG(0x0400)
 
@@ -37,9 +39,6 @@
 #define S5P_HDMI_PHY_CONTROL			S5P_PMUREG(0x0700)
 #define S5P_HDMI_PHY_ENABLE			(1 << 0)
 
-#define S5P_USBHOST_PHY_CONTROL			S5P_PMUREG(0x0708)
-#define S5P_USBHOST_PHY_ENABLE			(1 << 0)
-
 #define S5P_DAC_PHY_CONTROL			S5P_PMUREG(0x070C)
 #define S5P_DAC_PHY_ENABLE			(1 << 0)
 
@@ -48,7 +47,6 @@
 #define S5P_MIPI_DPHY_SRESETN			(1 << 1)
 #define S5P_MIPI_DPHY_MRESETN			(1 << 2)
 
-#define S5P_PMU_SATA_PHY_CONTROL		S5P_PMUREG(0x0720)
 #define S5P_INFORM0				S5P_PMUREG(0x0800)
 #define S5P_INFORM1				S5P_PMUREG(0x0804)
 #define S5P_INFORM2				S5P_PMUREG(0x0808)
@@ -81,7 +79,6 @@
 #define S5P_CMU_CLKSTOP_MFC_LOWPWR		S5P_PMUREG(0x1148)
 #define S5P_CMU_CLKSTOP_G3D_LOWPWR		S5P_PMUREG(0x114C)
 #define S5P_CMU_CLKSTOP_LCD0_LOWPWR		S5P_PMUREG(0x1150)
-#define S5P_CMU_CLKSTOP_LCD1_LOWPWR		S5P_PMUREG(0x1154)
 #define S5P_CMU_CLKSTOP_MAUDIO_LOWPWR		S5P_PMUREG(0x1158)
 #define S5P_CMU_CLKSTOP_GPS_LOWPWR		S5P_PMUREG(0x115C)
 #define S5P_CMU_RESET_CAM_LOWPWR		S5P_PMUREG(0x1160)
@@ -89,7 +86,6 @@
 #define S5P_CMU_RESET_MFC_LOWPWR		S5P_PMUREG(0x1168)
 #define S5P_CMU_RESET_G3D_LOWPWR		S5P_PMUREG(0x116C)
 #define S5P_CMU_RESET_LCD0_LOWPWR		S5P_PMUREG(0x1170)
-#define S5P_CMU_RESET_LCD1_LOWPWR		S5P_PMUREG(0x1174)
 #define S5P_CMU_RESET_MAUDIO_LOWPWR		S5P_PMUREG(0x1178)
 #define S5P_CMU_RESET_GPS_LOWPWR		S5P_PMUREG(0x117C)
 #define S5P_TOP_BUS_LOWPWR			S5P_PMUREG(0x1180)
@@ -97,14 +93,11 @@
 #define S5P_TOP_PWR_LOWPWR			S5P_PMUREG(0x1188)
 #define S5P_LOGIC_RESET_LOWPWR			S5P_PMUREG(0x11A0)
 #define S5P_ONENAND_MEM_LOWPWR			S5P_PMUREG(0x11C0)
-#define S5P_MODIMIF_MEM_LOWPWR			S5P_PMUREG(0x11C4)
 #define S5P_G2D_ACP_MEM_LOWPWR			S5P_PMUREG(0x11C8)
 #define S5P_USBOTG_MEM_LOWPWR			S5P_PMUREG(0x11CC)
 #define S5P_HSMMC_MEM_LOWPWR			S5P_PMUREG(0x11D0)
 #define S5P_CSSYS_MEM_LOWPWR			S5P_PMUREG(0x11D4)
 #define S5P_SECSS_MEM_LOWPWR			S5P_PMUREG(0x11D8)
-#define S5P_PCIE_MEM_LOWPWR			S5P_PMUREG(0x11E0)
-#define S5P_SATA_MEM_LOWPWR			S5P_PMUREG(0x11E4)
 #define S5P_PAD_RETENTION_DRAM_LOWPWR		S5P_PMUREG(0x1200)
 #define S5P_PAD_RETENTION_MAUDIO_LOWPWR		S5P_PMUREG(0x1204)
 #define S5P_PAD_RETENTION_GPIO_LOWPWR		S5P_PMUREG(0x1220)
@@ -125,7 +118,6 @@
 #define S5P_MFC_LOWPWR				S5P_PMUREG(0x1388)
 #define S5P_G3D_LOWPWR				S5P_PMUREG(0x138C)
 #define S5P_LCD0_LOWPWR				S5P_PMUREG(0x1390)
-#define S5P_LCD1_LOWPWR				S5P_PMUREG(0x1394)
 #define S5P_MAUDIO_LOWPWR			S5P_PMUREG(0x1398)
 #define S5P_GPS_LOWPWR				S5P_PMUREG(0x139C)
 #define S5P_GPS_ALIVE_LOWPWR			S5P_PMUREG(0x13A0)
@@ -161,7 +153,6 @@
 #define S5P_PMU_MFC_CONF			S5P_PMUREG(0x3C40)
 #define S5P_PMU_G3D_CONF			S5P_PMUREG(0x3C60)
 #define S5P_PMU_LCD0_CONF			S5P_PMUREG(0x3C80)
-#define S5P_PMU_LCD1_CONF			S5P_PMUREG(0x3CA0)
 #define S5P_PMU_GPS_CONF			S5P_PMUREG(0x3CE0)
 
 #define S5P_PMU_SATA_PHY_CONTROL_EN		0x1
@@ -170,4 +161,60 @@
 
 #define S5P_CHECK_SLEEP				0x00000BAD
 
+/* Only for EXYNOS4210 */
+#define S5P_USBHOST_PHY_CONTROL		S5P_PMUREG(0x0708)
+#define S5P_USBHOST_PHY_ENABLE		(1 << 0)
+
+#define S5P_PMU_SATA_PHY_CONTROL	S5P_PMUREG(0x0720)
+
+#define S5P_CMU_CLKSTOP_LCD1_LOWPWR	S5P_PMUREG(0x1154)
+#define S5P_CMU_RESET_LCD1_LOWPWR	S5P_PMUREG(0x1174)
+#define S5P_MODIMIF_MEM_LOWPWR		S5P_PMUREG(0x11C4)
+#define S5P_PCIE_MEM_LOWPWR		S5P_PMUREG(0x11E0)
+#define S5P_SATA_MEM_LOWPWR		S5P_PMUREG(0x11E4)
+#define S5P_LCD1_LOWPWR			S5P_PMUREG(0x1394)
+
+#define S5P_PMU_LCD1_CONF		S5P_PMUREG(0x3CA0)
+
+/* Only for EXYNOS4212 */
+#define S5P_ISP_ARM_LOWPWR			S5P_PMUREG(0x1050)
+#define S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR	S5P_PMUREG(0x1054)
+#define S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR	S5P_PMUREG(0x1058)
+#define S5P_CMU_ACLKSTOP_COREBLK_LOWPWR		S5P_PMUREG(0x1110)
+#define S5P_CMU_SCLKSTOP_COREBLK_LOWPWR		S5P_PMUREG(0x1114)
+#define S5P_CMU_RESET_COREBLK_LOWPWR		S5P_PMUREG(0x111C)
+#define S5P_MPLLUSER_SYSCLK_LOWPWR		S5P_PMUREG(0x1130)
+#define S5P_CMU_CLKSTOP_ISP_LOWPWR		S5P_PMUREG(0x1154)
+#define S5P_CMU_RESET_ISP_LOWPWR		S5P_PMUREG(0x1174)
+#define S5P_TOP_BUS_COREBLK_LOWPWR		S5P_PMUREG(0x1190)
+#define S5P_TOP_RETENTION_COREBLK_LOWPWR	S5P_PMUREG(0x1194)
+#define S5P_TOP_PWR_COREBLK_LOWPWR		S5P_PMUREG(0x1198)
+#define S5P_OSCCLK_GATE_LOWPWR			S5P_PMUREG(0x11A4)
+#define S5P_LOGIC_RESET_COREBLK_LOWPWR		S5P_PMUREG(0x11B0)
+#define S5P_OSCCLK_GATE_COREBLK_LOWPWR		S5P_PMUREG(0x11B4)
+#define S5P_HSI_MEM_LOWPWR			S5P_PMUREG(0x11C4)
+#define S5P_ROTATOR_MEM_LOWPWR			S5P_PMUREG(0x11DC)
+#define S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR	S5P_PMUREG(0x123C)
+#define S5P_PAD_ISOLATION_COREBLK_LOWPWR	S5P_PMUREG(0x1250)
+#define S5P_GPIO_MODE_COREBLK_LOWPWR		S5P_PMUREG(0x1320)
+#define S5P_TOP_ASB_RESET_LOWPWR		S5P_PMUREG(0x1344)
+#define S5P_TOP_ASB_ISOLATION_LOWPWR		S5P_PMUREG(0x1348)
+#define S5P_ISP_LOWPWR				S5P_PMUREG(0x1394)
+#define S5P_DRAM_FREQ_DOWN_LOWPWR		S5P_PMUREG(0x13B0)
+#define S5P_DDRPHY_DLLOFF_LOWPWR		S5P_PMUREG(0x13B4)
+#define S5P_CMU_SYSCLK_ISP_LOWPWR		S5P_PMUREG(0x13B8)
+#define S5P_CMU_SYSCLK_GPS_LOWPWR		S5P_PMUREG(0x13BC)
+#define S5P_LPDDR_PHY_DLL_LOCK_LOWPWR		S5P_PMUREG(0x13C0)
+
+#define S5P_ARM_L2_0_OPTION			S5P_PMUREG(0x2608)
+#define S5P_ARM_L2_1_OPTION			S5P_PMUREG(0x2628)
+#define S5P_ONENAND_MEM_OPTION			S5P_PMUREG(0x2E08)
+#define S5P_HSI_MEM_OPTION			S5P_PMUREG(0x2E28)
+#define S5P_G2D_ACP_MEM_OPTION			S5P_PMUREG(0x2E48)
+#define S5P_USBOTG_MEM_OPTION			S5P_PMUREG(0x2E68)
+#define S5P_HSMMC_MEM_OPTION			S5P_PMUREG(0x2E88)
+#define S5P_CSSYS_MEM_OPTION			S5P_PMUREG(0x2EA8)
+#define S5P_SECSS_MEM_OPTION			S5P_PMUREG(0x2EC8)
+#define S5P_ROTATOR_MEM_OPTION			S5P_PMUREG(0x2F48)
+
 #endif /* __ASM_ARCH_REGS_PMU_H */
-- 
cgit v1.2.3-18-g5258


From 00a351f273a85b23a3fc9e7740b4c0080e69c9a1 Mon Sep 17 00:00:00 2001
From: Jongpill Lee <boyko.lee@samsung.com>
Date: Tue, 27 Sep 2011 07:26:04 +0900
Subject: ARM: EXYNOS4: Support suspend/resume for EXYNOS4212

Signed-off-by: Jongpill Lee <boyko.lee@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/pm.c  |   7 +++
 arch/arm/mach-exynos4/pmu.c | 118 +++++++++++++++++++++++++++++++++++++++++++-
 2 files changed, 124 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/pm.c b/arch/arm/mach-exynos4/pm.c
index bc6ca9482de..6e59c8398a4 100644
--- a/arch/arm/mach-exynos4/pm.c
+++ b/arch/arm/mach-exynos4/pm.c
@@ -404,6 +404,13 @@ static int exynos4_pm_suspend(void)
 	tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
 	__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
 
+	if (soc_is_exynos4212()) {
+		tmp = __raw_readl(S5P_CENTRAL_SEQ_OPTION);
+		tmp &= ~(S5P_USE_STANDBYWFI_ISP_ARM |
+			 S5P_USE_STANDBYWFE_ISP_ARM);
+		__raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION);
+	}
+
 	/* Save Power control register */
 	asm ("mrc p15, 0, %0, c15, c0, 0"
 	     : "=r" (tmp) : : "cc");
diff --git a/arch/arm/mach-exynos4/pmu.c b/arch/arm/mach-exynos4/pmu.c
index 02bfa0d1bb9..bba48f5c3e8 100644
--- a/arch/arm/mach-exynos4/pmu.c
+++ b/arch/arm/mach-exynos4/pmu.c
@@ -94,6 +94,114 @@ static struct exynos4_pmu_conf exynos4210_pmu_config[] = {
 	{ PMU_TABLE_END,},
 };
 
+static struct exynos4_pmu_conf exynos4212_pmu_config[] = {
+	{ S5P_ARM_CORE0_LOWPWR,			{ 0x0, 0x0, 0x2 } },
+	{ S5P_DIS_IRQ_CORE0,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_CENTRAL0,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_ARM_CORE1_LOWPWR,			{ 0x0, 0x0, 0x2 } },
+	{ S5P_DIS_IRQ_CORE1,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_CENTRAL1,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_ISP_ARM_LOWPWR,			{ 0x1, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR,	{ 0x0, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR,	{ 0x0, 0x0, 0x0 } },
+	{ S5P_ARM_COMMON_LOWPWR,		{ 0x0, 0x0, 0x2 } },
+	{ S5P_L2_0_LOWPWR,			{ 0x0, 0x0, 0x3 } },
+	/* XXX_OPTION register should be set other field */
+	{ S5P_ARM_L2_0_OPTION,			{ 0x10, 0x10, 0x0 } },
+	{ S5P_L2_1_LOWPWR,			{ 0x0, 0x0, 0x3 } },
+	{ S5P_ARM_L2_1_OPTION,			{ 0x10, 0x10, 0x0 } },
+	{ S5P_CMU_ACLKSTOP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_SCLKSTOP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_LOWPWR,			{ 0x1, 0x1, 0x0 } },
+	{ S5P_DRAM_FREQ_DOWN_LOWPWR,		{ 0x1, 0x1, 0x1 } },
+	{ S5P_DDRPHY_DLLOFF_LOWPWR,		{ 0x1, 0x1, 0x1 } },
+	{ S5P_LPDDR_PHY_DLL_LOCK_LOWPWR,	{ 0x1, 0x1, 0x1 } },
+	{ S5P_CMU_ACLKSTOP_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_SCLKSTOP_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_COREBLK_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_APLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_MPLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_VPLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_EPLL_SYSCLK_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_MPLLUSER_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_GPSALIVE_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_CAM_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_TV_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_MFC_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_G3D_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_LCD0_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_ISP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_MAUDIO_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_GPS_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_CAM_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_TV_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_MFC_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_G3D_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_LCD0_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_ISP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_MAUDIO_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_GPS_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_TOP_BUS_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_TOP_RETENTION_LOWPWR,		{ 0x1, 0x0, 0x1 } },
+	{ S5P_TOP_PWR_LOWPWR,			{ 0x3, 0x0, 0x3 } },
+	{ S5P_TOP_BUS_COREBLK_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_TOP_RETENTION_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x1 } },
+	{ S5P_TOP_PWR_COREBLK_LOWPWR,		{ 0x3, 0x0, 0x3 } },
+	{ S5P_LOGIC_RESET_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_OSCCLK_GATE_LOWPWR,		{ 0x1, 0x0, 0x1 } },
+	{ S5P_LOGIC_RESET_COREBLK_LOWPWR,	{ 0x1, 0x1, 0x0 } },
+	{ S5P_OSCCLK_GATE_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x1 } },
+	{ S5P_ONENAND_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_ONENAND_MEM_OPTION,		{ 0x10, 0x10, 0x0 } },
+	{ S5P_HSI_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_HSI_MEM_OPTION,			{ 0x10, 0x10, 0x0 } },
+	{ S5P_G2D_ACP_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_G2D_ACP_MEM_OPTION,		{ 0x10, 0x10, 0x0 } },
+	{ S5P_USBOTG_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_USBOTG_MEM_OPTION,		{ 0x10, 0x10, 0x0 } },
+	{ S5P_HSMMC_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_HSMMC_MEM_OPTION,			{ 0x10, 0x10, 0x0 } },
+	{ S5P_CSSYS_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_CSSYS_MEM_OPTION,			{ 0x10, 0x10, 0x0 } },
+	{ S5P_SECSS_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_SECSS_MEM_OPTION,			{ 0x10, 0x10, 0x0 } },
+	{ S5P_ROTATOR_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_ROTATOR_MEM_OPTION,		{ 0x10, 0x10, 0x0 } },
+	{ S5P_PAD_RETENTION_DRAM_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_MAUDIO_LOWPWR,	{ 0x1, 0x1, 0x0 } },
+	{ S5P_PAD_RETENTION_GPIO_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_UART_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_MMCA_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_MMCB_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_EBIA_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_EBIB_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR,{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_ISOLATION_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_ISOLATION_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_ALV_SEL_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_XUSBXTI_LOWPWR,			{ 0x1, 0x1, 0x0 } },
+	{ S5P_XXTI_LOWPWR,			{ 0x1, 0x1, 0x0 } },
+	{ S5P_EXT_REGULATOR_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_GPIO_MODE_LOWPWR,			{ 0x1, 0x0, 0x0 } },
+	{ S5P_GPIO_MODE_COREBLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_GPIO_MODE_MAUDIO_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_TOP_ASB_RESET_LOWPWR,		{ 0x1, 0x1, 0x1 } },
+	{ S5P_TOP_ASB_ISOLATION_LOWPWR,		{ 0x1, 0x0, 0x1 } },
+	{ S5P_CAM_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_TV_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_MFC_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_G3D_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_LCD0_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_ISP_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_MAUDIO_LOWPWR,			{ 0x7, 0x7, 0x0 } },
+	{ S5P_GPS_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_GPS_ALIVE_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_CMU_SYSCLK_ISP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_SYSCLK_GPS_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ PMU_TABLE_END,},
+};
+
 void exynos4_sys_powerdown_conf(enum sys_powerdown mode)
 {
 	unsigned int i;
@@ -107,7 +215,15 @@ static int __init exynos4_pmu_init(void)
 {
 	exynos4_pmu_config = exynos4210_pmu_config;
 
-	pr_info("EXYNOS4210 PMU Initialize\n");
+	if (soc_is_exynos4210()) {
+		exynos4_pmu_config = exynos4210_pmu_config;
+		pr_info("EXYNOS4210 PMU Initialize\n");
+	} else if (soc_is_exynos4212()) {
+		exynos4_pmu_config = exynos4212_pmu_config;
+		pr_info("EXYNOS4212 PMU Initialize\n");
+	} else {
+		pr_info("EXYNOS4: PMU not supported\n");
+	}
 
 	return 0;
 }
-- 
cgit v1.2.3-18-g5258


From c0735c85d1b9e2a1954deb3b3c8d5061f70464e5 Mon Sep 17 00:00:00 2001
From: Hatim Ali <hatim.rv@samsung.com>
Date: Tue, 27 Sep 2011 07:37:18 +0900
Subject: ARM: EXYNOS4: Add TVOUT support for SMDKV310

Add support for TVOUT on SMDKV310 board.

Signed-off-by: Hatim Ali <hatim.rv@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/Kconfig         |  2 ++
 arch/arm/mach-exynos4/mach-smdkv310.c | 18 ++++++++++++++++++
 2 files changed, 20 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index 13fc721f8e9..980ffd6ccc4 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -139,7 +139,9 @@ config MACH_SMDKV310
 	select S3C_DEV_RTC
 	select S3C_DEV_WDT
 	select S3C_DEV_I2C1
+	select S5P_DEV_I2C_HDMIPHY
 	select S5P_DEV_MFC
+	select S5P_DEV_TV
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c
index 5f62b2b3310..5ba432e21e2 100644
--- a/arch/arm/mach-exynos4/mach-smdkv310.c
+++ b/arch/arm/mach-exynos4/mach-smdkv310.c
@@ -173,6 +173,7 @@ static struct platform_device *smdkv310_devices[] __initdata = {
 	&s3c_device_hsmmc2,
 	&s3c_device_hsmmc3,
 	&s3c_device_i2c1,
+	&s5p_device_i2c_hdmiphy,
 	&s3c_device_rtc,
 	&s3c_device_wdt,
 	&exynos4_device_ac97,
@@ -194,6 +195,8 @@ static struct platform_device *smdkv310_devices[] __initdata = {
 	&samsung_asoc_idma,
 	&smdkv310_smsc911x,
 	&exynos4_device_ahci,
+	&s5p_device_hdmi,
+	&s5p_device_mixer,
 };
 
 static void __init smdkv310_smsc911x_init(void)
@@ -230,6 +233,18 @@ static struct platform_pwm_backlight_data smdkv310_bl_data = {
 	.pwm_period_ns  = 1000,
 };
 
+static void s5p_tv_setup(void)
+{
+	/* direct HPD to HDMI chip */
+	WARN_ON(gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug"));
+	s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
+	s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
+
+	/* setup dependencies between TV devices */
+	s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev;
+	s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev;
+}
+
 static void __init smdkv310_map_io(void)
 {
 	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
@@ -254,6 +269,9 @@ static void __init smdkv310_machine_init(void)
 	s3c_sdhci2_set_platdata(&smdkv310_hsmmc2_pdata);
 	s3c_sdhci3_set_platdata(&smdkv310_hsmmc3_pdata);
 
+	s5p_tv_setup();
+	s5p_i2c_hdmiphy_set_platdata(NULL);
+
 	samsung_keypad_set_platdata(&smdkv310_keypad_data);
 
 	samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
-- 
cgit v1.2.3-18-g5258


From d93f5eefd456bde3dd14eac7b909f3ba4e55cdbb Mon Sep 17 00:00:00 2001
From: Ajay Kumar <ajaykumar.rs@samsung.com>
Date: Tue, 27 Sep 2011 07:46:45 +0900
Subject: ARM: S5P64X0: Add register base and IRQ for Framebuffer

This patch adds:
	-- Framebuffer related register mappings and bit fields.
	-- IRQ number being used.

Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s5p64x0/include/mach/irqs.h | 4 ++++
 arch/arm/mach-s5p64x0/include/mach/map.h  | 3 +++
 2 files changed, 7 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-s5p64x0/include/mach/irqs.h b/arch/arm/mach-s5p64x0/include/mach/irqs.h
index 5837a36ece8..53982db9d25 100644
--- a/arch/arm/mach-s5p64x0/include/mach/irqs.h
+++ b/arch/arm/mach-s5p64x0/include/mach/irqs.h
@@ -87,6 +87,10 @@
 
 #define IRQ_I2S0		IRQ_I2SV40
 
+#define IRQ_LCD_FIFO		IRQ_DISPCON0
+#define IRQ_LCD_VSYNC		IRQ_DISPCON1
+#define IRQ_LCD_SYSTEM		IRQ_DISPCON2
+
 /* S5P6450 EINT feature will be added */
 
 /*
diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach-s5p64x0/include/mach/map.h
index 95c91257c7c..c5ef50c2629 100644
--- a/arch/arm/mach-s5p64x0/include/mach/map.h
+++ b/arch/arm/mach-s5p64x0/include/mach/map.h
@@ -47,6 +47,8 @@
 
 #define S5P64X0_PA_HSMMC(x)	(0xED800000 + ((x) * 0x100000))
 
+#define S5P64X0_PA_FB		0xEE000000
+
 #define S5P64X0_PA_I2S		0xF2000000
 #define S5P6450_PA_I2S1		0xF2800000
 #define S5P6450_PA_I2S2		0xF2900000
@@ -64,6 +66,7 @@
 #define S3C_PA_IIC1		S5P6440_PA_IIC1
 #define S3C_PA_RTC		S5P64X0_PA_RTC
 #define S3C_PA_WDT		S5P64X0_PA_WDT
+#define S3C_PA_FB		S5P64X0_PA_FB
 
 #define S5P_PA_CHIPID		S5P64X0_PA_CHIPID
 #define S5P_PA_SROMC		S5P64X0_PA_SROMC
-- 
cgit v1.2.3-18-g5258


From 43c46216660a0329af558d2e6bdf540ee4d5c0d5 Mon Sep 17 00:00:00 2001
From: Ajay Kumar <ajaykumar.rs@samsung.com>
Date: Tue, 27 Sep 2011 07:46:50 +0900
Subject: ARM: S5P64X0: Set s3c_device_fb name

Set s3c_device_fb name as "s5p64x0-fb" for S5P6440 and S5P6450.

Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s5p64x0/cpu.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-s5p64x0/cpu.c b/arch/arm/mach-s5p64x0/cpu.c
index a5c00952ea3..617da3b3bfb 100644
--- a/arch/arm/mach-s5p64x0/cpu.c
+++ b/arch/arm/mach-s5p64x0/cpu.c
@@ -38,6 +38,7 @@
 #include <plat/s5p6440.h>
 #include <plat/s5p6450.h>
 #include <plat/adc-core.h>
+#include <plat/fb-core.h>
 
 /* Initial IO mappings */
 
@@ -108,6 +109,7 @@ void __init s5p6440_map_io(void)
 {
 	/* initialize any device information early */
 	s3c_adc_setname("s3c64xx-adc");
+	s3c_fb_setname("s5p64x0-fb");
 
 	iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
 	iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc));
@@ -117,6 +119,7 @@ void __init s5p6450_map_io(void)
 {
 	/* initialize any device information early */
 	s3c_adc_setname("s3c64xx-adc");
+	s3c_fb_setname("s5p64x0-fb");
 
 	iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
 	iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc));
-- 
cgit v1.2.3-18-g5258


From c9f357ef9d032424ca36e7088a6eb7266887b3a2 Mon Sep 17 00:00:00 2001
From: Ajay Kumar <ajaykumar.rs@samsung.com>
Date: Tue, 27 Sep 2011 07:46:57 +0900
Subject: ARM: S5P64X0: Add GPIO setup for LCD

This patch adds GPIO lines settings(HSYNC, VSYNC, VCLK and VD) for LCD.

Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s5p64x0/Kconfig           |  6 ++++++
 arch/arm/mach-s5p64x0/Makefile          |  1 +
 arch/arm/mach-s5p64x0/setup-fb-24bpp.c  | 29 +++++++++++++++++++++++++++++
 arch/arm/plat-samsung/include/plat/fb.h |  7 +++++++
 4 files changed, 43 insertions(+)
 create mode 100644 arch/arm/mach-s5p64x0/setup-fb-24bpp.c

(limited to 'arch')

diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig
index 9527ed24dbf..92b06024ee9 100644
--- a/arch/arm/mach-s5p64x0/Kconfig
+++ b/arch/arm/mach-s5p64x0/Kconfig
@@ -21,6 +21,12 @@ config CPU_S5P6450
 	help
 	  Enable S5P6450 CPU support
 
+config S5P64X0_SETUP_FB_24BPP
+	bool
+	help
+	  Common setup code for S5P64X0 based boards with a LCD display
+	  through RGB interface.
+
 config S5P64X0_SETUP_I2C1
 	bool
 	help
diff --git a/arch/arm/mach-s5p64x0/Makefile b/arch/arm/mach-s5p64x0/Makefile
index 5b949553883..eb7468012a3 100644
--- a/arch/arm/mach-s5p64x0/Makefile
+++ b/arch/arm/mach-s5p64x0/Makefile
@@ -28,3 +28,4 @@ obj-y				+= dev-audio.o
 obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
 
 obj-$(CONFIG_S5P64X0_SETUP_I2C1)	+= setup-i2c1.o
+obj-$(CONFIG_S5P64X0_SETUP_FB_24BPP)	+= setup-fb-24bpp.o
diff --git a/arch/arm/mach-s5p64x0/setup-fb-24bpp.c b/arch/arm/mach-s5p64x0/setup-fb-24bpp.c
new file mode 100644
index 00000000000..f346ee4af54
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/setup-fb-24bpp.c
@@ -0,0 +1,29 @@
+/* linux/arch/arm/mach-s5p64x0/setup-fb-24bpp.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *             http://www.samsung.com/
+ *
+ * Base S5P64X0 GPIO setup information for LCD framebuffer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/fb.h>
+#include <linux/gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/fb.h>
+#include <plat/gpio-cfg.h>
+
+void s5p64x0_fb_gpio_setup_24bpp(void)
+{
+	if (soc_is_s5p6440()) {
+		s3c_gpio_cfgrange_nopull(S5P6440_GPI(0), 16, S3C_GPIO_SFN(2));
+		s3c_gpio_cfgrange_nopull(S5P6440_GPJ(0), 12, S3C_GPIO_SFN(2));
+	} else if (soc_is_s5p6450()) {
+		s3c_gpio_cfgrange_nopull(S5P6450_GPI(0), 16, S3C_GPIO_SFN(2));
+		s3c_gpio_cfgrange_nopull(S5P6450_GPJ(0), 12, S3C_GPIO_SFN(2));
+	}
+}
diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h
index 01f10e4d00c..0fedf47fa50 100644
--- a/arch/arm/plat-samsung/include/plat/fb.h
+++ b/arch/arm/plat-samsung/include/plat/fb.h
@@ -109,4 +109,11 @@ extern void s5pv210_fb_gpio_setup_24bpp(void);
  */
 extern void exynos4_fimd0_gpio_setup_24bpp(void);
 
+/**
+ * s5p64x0_fb_gpio_setup_24bpp() - S5P6440/S5P6450 setup function for 24bpp LCD
+ *
+ * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
+ */
+extern void s5p64x0_fb_gpio_setup_24bpp(void);
+
 #endif /* __PLAT_S3C_FB_H */
-- 
cgit v1.2.3-18-g5258


From 1030e5c56258969f96417faa8f77881b8c671b93 Mon Sep 17 00:00:00 2001
From: Ajay Kumar <ajaykumar.rs@samsung.com>
Date: Tue, 27 Sep 2011 07:51:22 +0900
Subject: ARM: S5P6440: Add LCD-LTE480 and enable Framebuffer support

This patch:
	-- Adds platform device support for LCD-LTE480.
	-- Adds platform data for FB with win_mode and default_bpp.
	-- Enables FB device support and platform-lcd support.
	-- Adds SPCON settings for LCD.

Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s5p64x0/Kconfig                  |  2 +
 arch/arm/mach-s5p64x0/include/mach/regs-gpio.h |  4 ++
 arch/arm/mach-s5p64x0/mach-smdk6440.c          | 74 ++++++++++++++++++++++++++
 3 files changed, 80 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig
index 92b06024ee9..e51a5f18b1e 100644
--- a/arch/arm/mach-s5p64x0/Kconfig
+++ b/arch/arm/mach-s5p64x0/Kconfig
@@ -37,6 +37,7 @@ config S5P64X0_SETUP_I2C1
 config MACH_SMDK6440
 	bool "SMDK6440"
 	select CPU_S5P6440
+	select S3C_DEV_FB
 	select S3C_DEV_I2C1
 	select S3C_DEV_RTC
 	select S3C_DEV_WDT
@@ -45,6 +46,7 @@ config MACH_SMDK6440
 	select SAMSUNG_DEV_BACKLIGHT
 	select SAMSUNG_DEV_PWM
 	select SAMSUNG_DEV_TS
+	select S5P64X0_SETUP_FB_24BPP
 	select S5P64X0_SETUP_I2C1
 	help
 	  Machine support for the Samsung SMDK6440
diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
index 6ce254729f3..88269ec70a3 100644
--- a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
@@ -34,6 +34,10 @@
 #define S5P6450_GPQ_BASE		(S5P_VA_GPIO + 0x0180)
 #define S5P6450_GPS_BASE		(S5P_VA_GPIO + 0x0300)
 
+#define S5P64X0_SPCON0			(S5P_VA_GPIO + 0x1A0)
+#define S5P64X0_SPCON0_LCD_SEL_MASK	(0x3 << 0)
+#define S5P64X0_SPCON0_LCD_SEL_RGB	(0x1 << 0)
+
 /* External interrupt control registers for group0 */
 
 #define EINT0CON0_OFFSET		(0x900)
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c
index 346f8dfa6f3..39026e9d5f3 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6440.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c
@@ -23,6 +23,9 @@
 #include <linux/clk.h>
 #include <linux/gpio.h>
 #include <linux/pwm_backlight.h>
+#include <linux/fb.h>
+
+#include <video/platform_lcd.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -47,6 +50,8 @@
 #include <plat/ts.h>
 #include <plat/s5p-time.h>
 #include <plat/backlight.h>
+#include <plat/fb.h>
+#include <plat/regs-fb.h>
 
 #define SMDK6440_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				S3C2410_UCON_RXILEVEL |		\
@@ -92,6 +97,59 @@ static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = {
 	},
 };
 
+/* Frame Buffer */
+static struct s3c_fb_pd_win smdk6440_fb_win0 = {
+	.win_mode = {
+		.left_margin	= 8,
+		.right_margin	= 13,
+		.upper_margin	= 7,
+		.lower_margin	= 5,
+		.hsync_len	= 3,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 24,
+};
+
+static struct s3c_fb_platdata smdk6440_lcd_pdata __initdata = {
+	.win[0]		= &smdk6440_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= s5p64x0_fb_gpio_setup_24bpp,
+};
+
+/* LCD power controller */
+static void smdk6440_lte480_reset_power(struct plat_lcd_data *pd,
+					 unsigned int power)
+{
+	int err;
+
+	if (power) {
+		err = gpio_request(S5P6440_GPN(5), "GPN");
+		if (err) {
+			printk(KERN_ERR "failed to request GPN for lcd reset\n");
+			return;
+		}
+
+		gpio_direction_output(S5P6440_GPN(5), 1);
+		gpio_set_value(S5P6440_GPN(5), 0);
+		gpio_set_value(S5P6440_GPN(5), 1);
+		gpio_free(S5P6440_GPN(5));
+	}
+}
+
+static struct plat_lcd_data smdk6440_lcd_power_data = {
+	.set_power	= smdk6440_lte480_reset_power,
+};
+
+static struct platform_device smdk6440_lcd_lte480wv = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s3c_device_fb.dev,
+	.dev.platform_data	= &smdk6440_lcd_power_data,
+};
+
 static struct platform_device *smdk6440_devices[] __initdata = {
 	&s3c_device_adc,
 	&s3c_device_rtc,
@@ -101,6 +159,8 @@ static struct platform_device *smdk6440_devices[] __initdata = {
 	&s3c_device_wdt,
 	&samsung_asoc_dma,
 	&s5p6440_device_iis,
+	&s3c_device_fb,
+	&smdk6440_lcd_lte480wv,
 };
 
 static struct s3c2410_platform_i2c s5p6440_i2c0_data __initdata = {
@@ -153,6 +213,17 @@ static void __init smdk6440_map_io(void)
 	s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
 }
 
+static void s5p6440_set_lcd_interface(void)
+{
+	unsigned int cfg;
+
+	/* select TFT LCD type (RGB I/F) */
+	cfg = __raw_readl(S5P64X0_SPCON0);
+	cfg &= ~S5P64X0_SPCON0_LCD_SEL_MASK;
+	cfg |= S5P64X0_SPCON0_LCD_SEL_RGB;
+	__raw_writel(cfg, S5P64X0_SPCON0);
+}
+
 static void __init smdk6440_machine_init(void)
 {
 	s3c24xx_ts_set_platdata(&s3c_ts_platform);
@@ -166,6 +237,9 @@ static void __init smdk6440_machine_init(void)
 
 	samsung_bl_set(&smdk6440_bl_gpio_info, &smdk6440_bl_data);
 
+	s5p6440_set_lcd_interface();
+	s3c_fb_set_platdata(&smdk6440_lcd_pdata);
+
 	platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices));
 }
 
-- 
cgit v1.2.3-18-g5258


From 7301794c87e508f5919a70d109ea8e79562815ff Mon Sep 17 00:00:00 2001
From: Ajay Kumar <ajaykumar.rs@samsung.com>
Date: Tue, 27 Sep 2011 07:53:20 +0900
Subject: ARM: S5P6450: Add LCD-LTE480 and enable Framebuffer support

This patch:
	-- Adds platform device support for LCD-LTE480.
	-- Adds platform data for FB with win_mode and default_bpp.
	-- Enables FB device support and platform-lcd support.
	-- Adds SPCON settings for LCD.

Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s5p64x0/Kconfig         |  2 +
 arch/arm/mach-s5p64x0/mach-smdk6450.c | 75 +++++++++++++++++++++++++++++++++++
 2 files changed, 77 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig
index e51a5f18b1e..e361c41314e 100644
--- a/arch/arm/mach-s5p64x0/Kconfig
+++ b/arch/arm/mach-s5p64x0/Kconfig
@@ -54,6 +54,7 @@ config MACH_SMDK6440
 config MACH_SMDK6450
 	bool "SMDK6450"
 	select CPU_S5P6450
+	select S3C_DEV_FB
 	select S3C_DEV_I2C1
 	select S3C_DEV_RTC
 	select S3C_DEV_WDT
@@ -62,6 +63,7 @@ config MACH_SMDK6450
 	select SAMSUNG_DEV_BACKLIGHT
 	select SAMSUNG_DEV_PWM
 	select SAMSUNG_DEV_TS
+	select S5P64X0_SETUP_FB_24BPP
 	select S5P64X0_SETUP_I2C1
 	help
 	  Machine support for the Samsung SMDK6450
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
index 33f2adf8f3f..92b5de1465b 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6450.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c
@@ -23,6 +23,9 @@
 #include <linux/clk.h>
 #include <linux/gpio.h>
 #include <linux/pwm_backlight.h>
+#include <linux/fb.h>
+
+#include <video/platform_lcd.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -47,6 +50,8 @@
 #include <plat/ts.h>
 #include <plat/s5p-time.h>
 #include <plat/backlight.h>
+#include <plat/fb.h>
+#include <plat/regs-fb.h>
 
 #define SMDK6450_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				S3C2410_UCON_RXILEVEL |		\
@@ -110,6 +115,59 @@ static struct s3c2410_uartcfg smdk6450_uartcfgs[] __initdata = {
 #endif
 };
 
+/* Frame Buffer */
+static struct s3c_fb_pd_win smdk6450_fb_win0 = {
+	.win_mode	= {
+		.left_margin	= 8,
+		.right_margin	= 13,
+		.upper_margin	= 7,
+		.lower_margin	= 5,
+		.hsync_len	= 3,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 24,
+};
+
+static struct s3c_fb_platdata smdk6450_lcd_pdata __initdata = {
+	.win[0]		= &smdk6450_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= s5p64x0_fb_gpio_setup_24bpp,
+};
+
+/* LCD power controller */
+static void smdk6450_lte480_reset_power(struct plat_lcd_data *pd,
+					 unsigned int power)
+{
+	int err;
+
+	if (power) {
+		err = gpio_request(S5P6450_GPN(5), "GPN");
+		if (err) {
+			printk(KERN_ERR "failed to request GPN for lcd reset\n");
+			return;
+		}
+
+		gpio_direction_output(S5P6450_GPN(5), 1);
+		gpio_set_value(S5P6450_GPN(5), 0);
+		gpio_set_value(S5P6450_GPN(5), 1);
+		gpio_free(S5P6450_GPN(5));
+	}
+}
+
+static struct plat_lcd_data smdk6450_lcd_power_data = {
+	.set_power	= smdk6450_lte480_reset_power,
+};
+
+static struct platform_device smdk6450_lcd_lte480wv = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s3c_device_fb.dev,
+	.dev.platform_data	= &smdk6450_lcd_power_data,
+};
+
 static struct platform_device *smdk6450_devices[] __initdata = {
 	&s3c_device_adc,
 	&s3c_device_rtc,
@@ -119,6 +177,9 @@ static struct platform_device *smdk6450_devices[] __initdata = {
 	&s3c_device_wdt,
 	&samsung_asoc_dma,
 	&s5p6450_device_iis0,
+	&s3c_device_fb,
+	&smdk6450_lcd_lte480wv,
+
 	/* s5p6450_device_spi0 will be added */
 };
 
@@ -172,6 +233,17 @@ static void __init smdk6450_map_io(void)
 	s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
 }
 
+static void s5p6450_set_lcd_interface(void)
+{
+	unsigned int cfg;
+
+	/* select TFT LCD type (RGB I/F) */
+	cfg = __raw_readl(S5P64X0_SPCON0);
+	cfg &= ~S5P64X0_SPCON0_LCD_SEL_MASK;
+	cfg |= S5P64X0_SPCON0_LCD_SEL_RGB;
+	__raw_writel(cfg, S5P64X0_SPCON0);
+}
+
 static void __init smdk6450_machine_init(void)
 {
 	s3c24xx_ts_set_platdata(&s3c_ts_platform);
@@ -185,6 +257,9 @@ static void __init smdk6450_machine_init(void)
 
 	samsung_bl_set(&smdk6450_bl_gpio_info, &smdk6450_bl_data);
 
+	s5p6450_set_lcd_interface();
+	s3c_fb_set_platdata(&smdk6450_lcd_pdata);
+
 	platform_add_devices(smdk6450_devices, ARRAY_SIZE(smdk6450_devices));
 }
 
-- 
cgit v1.2.3-18-g5258


From e3b454f731e73531bc61e144c1890907103f2b19 Mon Sep 17 00:00:00 2001
From: Heiko Stuebner <heiko@sntech.de>
Date: Tue, 27 Sep 2011 08:44:37 +0900
Subject: ARM: S3C2443: Move i2s clock definitions to common code

S3C2416/S3C2450 use the same clocks for their i2s blocks
and can therefore reuse the existing ones.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c2443/clock.c         | 53 -----------------------------------
 arch/arm/plat-s3c24xx/s3c2443-clock.c | 52 ++++++++++++++++++++++++++++++++++
 2 files changed, 52 insertions(+), 53 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index 38058af4897..27549c4fc7b 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -57,10 +57,6 @@
 
 /* clock selections */
 
-static struct clk clk_i2s_ext = {
-	.name		= "i2s-ext",
-};
-
 /* armdiv
  *
  * this clock is sourced from msysclk and can have a number of
@@ -235,48 +231,6 @@ static struct clk clk_hsmmc = {
 	},
 };
 
-/* i2s_eplldiv
- *
- * This clock is the output from the I2S divisor of ESYSCLK, and is separate
- * from the mux that comes after it (cannot merge into one single clock)
-*/
-
-static struct clksrc_clk clk_i2s_eplldiv = {
-	.clk	= {
-		.name		= "i2s-eplldiv",
-		.parent		= &clk_esysclk.clk,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, },
-};
-
-/* i2s-ref
- *
- * i2s bus reference clock, selectable from external, esysclk or epllref
- *
- * Note, this used to be two clocks, but was compressed into one.
-*/
-
-struct clk *clk_i2s_srclist[] = {
-	[0] = &clk_i2s_eplldiv.clk,
-	[1] = &clk_i2s_ext,
-	[2] = &clk_epllref.clk,
-	[3] = &clk_epllref.clk,
-};
-
-static struct clksrc_clk clk_i2s = {
-	.clk	= {
-		.name		= "i2s-if",
-		.ctrlbit	= S3C2443_SCLKCON_I2SCLK,
-		.enable		= s3c2443_clkcon_enable_s,
-
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_i2s_srclist,
-		.nr_sources = ARRAY_SIZE(clk_i2s_srclist),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 },
-};
-
 /* standard clock definitions */
 
 static struct clk init_clocks_off[] = {
@@ -285,11 +239,6 @@ static struct clk init_clocks_off[] = {
 		.parent		= &clk_p,
 		.enable		= s3c2443_clkcon_enable_p,
 		.ctrlbit	= S3C2443_PCLKCON_SDI,
-	}, {
-		.name		= "iis",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_IIS,
 	}, {
 		.name		= "spi",
 		.devname	= "s3c2410-spi.0",
@@ -312,8 +261,6 @@ static struct clk init_clocks[] = {
 
 static struct clksrc_clk *clksrcs[] __initdata = {
 	&clk_arm,
-	&clk_i2s_eplldiv,
-	&clk_i2s,
 	&clk_hsspi,
 	&clk_hsmmc_div,
 };
diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/plat-s3c24xx/s3c2443-clock.c
index 59552c0ea5f..f630adfaf5b 100644
--- a/arch/arm/plat-s3c24xx/s3c2443-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c2443-clock.c
@@ -205,9 +205,59 @@ static struct clksrc_clk clksrc_clks[] = {
 	},
 };
 
+static struct clk clk_i2s_ext = {
+	.name		= "i2s-ext",
+};
+
+/* i2s_eplldiv
+ *
+ * This clock is the output from the I2S divisor of ESYSCLK, and is separate
+ * from the mux that comes after it (cannot merge into one single clock)
+*/
+
+static struct clksrc_clk clk_i2s_eplldiv = {
+	.clk	= {
+		.name		= "i2s-eplldiv",
+		.parent		= &clk_esysclk.clk,
+	},
+	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, },
+};
+
+/* i2s-ref
+ *
+ * i2s bus reference clock, selectable from external, esysclk or epllref
+ *
+ * Note, this used to be two clocks, but was compressed into one.
+*/
+
+static struct clk *clk_i2s_srclist[] = {
+	[0] = &clk_i2s_eplldiv.clk,
+	[1] = &clk_i2s_ext,
+	[2] = &clk_epllref.clk,
+	[3] = &clk_epllref.clk,
+};
+
+static struct clksrc_clk clk_i2s = {
+	.clk	= {
+		.name		= "i2s-if",
+		.ctrlbit	= S3C2443_SCLKCON_I2SCLK,
+		.enable		= s3c2443_clkcon_enable_s,
+
+	},
+	.sources = &(struct clksrc_sources) {
+		.sources = clk_i2s_srclist,
+		.nr_sources = ARRAY_SIZE(clk_i2s_srclist),
+	},
+	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 },
+};
 
 static struct clk init_clocks_off[] = {
 	{
+		.name		= "iis",
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_IIS,
+	}, {
 		.name		= "adc",
 		.parent		= &clk_p,
 		.enable		= s3c2443_clkcon_enable_p,
@@ -406,6 +456,8 @@ static struct clk *clks[] __initdata = {
 };
 
 static struct clksrc_clk *clksrcs[] __initdata = {
+	&clk_i2s_eplldiv,
+	&clk_i2s,
 	&clk_usb_bus_host,
 	&clk_epllref,
 	&clk_esysclk,
-- 
cgit v1.2.3-18-g5258


From bd95be618b2c7ee9066d82cb729c7fbbab102c93 Mon Sep 17 00:00:00 2001
From: Heiko Stuebner <heiko@sntech.de>
Date: Tue, 27 Sep 2011 08:44:57 +0900
Subject: ARM: S3C2443: Define constant for HSSPI pclk

It's the same clock for 2443/2416/2450.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
index 5e06c726583..df6434f326f 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
@@ -102,6 +102,7 @@
 #define S3C2443_PCLKCON_UART3		(1<<3)
 #define S3C2443_PCLKCON_IIC		(1<<4)
 #define S3C2443_PCLKCON_SDI		(1<<5)
+#define S3C2443_PCLKCON_HSSPI		(1<<6)
 #define S3C2443_PCLKCON_ADC		(1<<7)
 #define S3C2443_PCLKCON_AC97		(1<<8)
 #define S3C2443_PCLKCON_IIS		(1<<9)
-- 
cgit v1.2.3-18-g5258


From 4a43c666129f67b5bcc79fa59edb48c39fea75a0 Mon Sep 17 00:00:00 2001
From: Heiko Stuebner <heiko@sntech.de>
Date: Tue, 27 Sep 2011 08:45:09 +0900
Subject: ARM: S3C2416: Add HSSPI clock sourced from EPLL

This clock is special to the S3C2416/2450 SoCs.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c2416/clock.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2416/clock.c b/arch/arm/mach-s3c2416/clock.c
index 21a5e81f0ab..196fb37f4b1 100644
--- a/arch/arm/mach-s3c2416/clock.c
+++ b/arch/arm/mach-s3c2416/clock.c
@@ -38,6 +38,32 @@ static unsigned int armdiv[8] = {
 	[7] = 8,
 };
 
+static struct clksrc_clk hsspi_eplldiv = {
+	.clk = {
+		.name	= "hsspi-eplldiv",
+		.parent	= &clk_esysclk.clk,
+		.ctrlbit = (1 << 14),
+		.enable = s3c2443_clkcon_enable_s,
+	},
+	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 24 },
+};
+
+static struct clk *hsspi_sources[] = {
+	[0] = &hsspi_eplldiv.clk,
+	[1] = NULL, /* to fix */
+};
+
+static struct clksrc_clk hsspi_mux = {
+	.clk	= {
+		.name	= "hsspi-if",
+	},
+	.sources = &(struct clksrc_sources) {
+		.sources = hsspi_sources,
+		.nr_sources = ARRAY_SIZE(hsspi_sources),
+	},
+	.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 18 },
+};
+
 static struct clksrc_clk hsmmc_div[] = {
 	[0] = {
 		.clk = {
@@ -114,6 +140,8 @@ void __init_or_cpufreq s3c2416_setup_clocks(void)
 
 
 static struct clksrc_clk *clksrcs[] __initdata = {
+	&hsspi_eplldiv,
+	&hsspi_mux,
 	&hsmmc_div[0],
 	&hsmmc_div[1],
 	&hsmmc_mux[0],
-- 
cgit v1.2.3-18-g5258


From 8b069b7709c6b5d1492342164976ebfa178de31f Mon Sep 17 00:00:00 2001
From: Heiko Stuebner <heiko@sntech.de>
Date: Tue, 27 Sep 2011 08:45:23 +0900
Subject: ARM: S3C2443: Add hsspi-clock from pclk and rename S3C2443 hsspi sclk

This clock is common to S3C2443/2416/2450.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c2443/clock.c         | 2 +-
 arch/arm/plat-s3c24xx/s3c2443-clock.c | 5 +++++
 2 files changed, 6 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index 27549c4fc7b..cd51d04e1de 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -169,7 +169,7 @@ static struct clksrc_clk clk_arm = {
 
 static struct clksrc_clk clk_hsspi = {
 	.clk	= {
-		.name		= "hsspi",
+		.name		= "hsspi-if",
 		.parent		= &clk_esysclk.clk,
 		.ctrlbit	= S3C2443_SCLKCON_HSSPICLK,
 		.enable		= s3c2443_clkcon_enable_s,
diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/plat-s3c24xx/s3c2443-clock.c
index f630adfaf5b..07a4c81587a 100644
--- a/arch/arm/plat-s3c24xx/s3c2443-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c2443-clock.c
@@ -257,6 +257,11 @@ static struct clk init_clocks_off[] = {
 		.parent		= &clk_p,
 		.enable		= s3c2443_clkcon_enable_p,
 		.ctrlbit	= S3C2443_PCLKCON_IIS,
+	}, {
+		.name		= "hsspi",
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_HSSPI,
 	}, {
 		.name		= "adc",
 		.parent		= &clk_p,
-- 
cgit v1.2.3-18-g5258


From 9830f6a20d841acc36bd9ee275aa4586dd713749 Mon Sep 17 00:00:00 2001
From: Jingoo Han <jg1.han@samsung.com>
Date: Wed, 28 Sep 2011 10:33:25 +0900
Subject: ARM: EXYNOS4: Add usb ehci device to the SMDKV310

This patch is to support usb ehci device to the SMDKV310 board.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/Kconfig         |  2 ++
 arch/arm/mach-exynos4/mach-smdkv310.c | 16 ++++++++++++++++
 2 files changed, 18 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index 980ffd6ccc4..c4068fd7b83 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -142,6 +142,7 @@ config MACH_SMDKV310
 	select S5P_DEV_I2C_HDMIPHY
 	select S5P_DEV_MFC
 	select S5P_DEV_TV
+	select S5P_DEV_USB_EHCI
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
@@ -156,6 +157,7 @@ config MACH_SMDKV310
 	select EXYNOS4_SETUP_I2C1
 	select EXYNOS4_SETUP_KEYPAD
 	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS4_SETUP_USB_PHY
 	help
 	  Machine support for Samsung SMDKV310
 
diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c
index 5ba432e21e2..0fa734c1aa6 100644
--- a/arch/arm/mach-exynos4/mach-smdkv310.c
+++ b/arch/arm/mach-exynos4/mach-smdkv310.c
@@ -33,6 +33,8 @@
 #include <plat/gpio-cfg.h>
 #include <plat/backlight.h>
 #include <plat/mfc.h>
+#include <plat/ehci.h>
+#include <plat/clock.h>
 
 #include <mach/map.h>
 
@@ -167,6 +169,16 @@ static struct i2c_board_info i2c_devs1[] __initdata = {
 	{I2C_BOARD_INFO("wm8994", 0x1a),},
 };
 
+/* USB EHCI */
+static struct s5p_ehci_platdata smdkv310_ehci_pdata;
+
+static void __init smdkv310_ehci_init(void)
+{
+	struct s5p_ehci_platdata *pdata = &smdkv310_ehci_pdata;
+
+	s5p_ehci_set_platdata(pdata);
+}
+
 static struct platform_device *smdkv310_devices[] __initdata = {
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc1,
@@ -176,6 +188,7 @@ static struct platform_device *smdkv310_devices[] __initdata = {
 	&s5p_device_i2c_hdmiphy,
 	&s3c_device_rtc,
 	&s3c_device_wdt,
+	&s5p_device_ehci,
 	&exynos4_device_ac97,
 	&exynos4_device_i2s0,
 	&samsung_device_keypad,
@@ -276,6 +289,9 @@ static void __init smdkv310_machine_init(void)
 
 	samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
 
+	smdkv310_ehci_init();
+	clk_xusbxti.rate = 24000000;
+
 	platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
 	s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
 }
-- 
cgit v1.2.3-18-g5258


From 2543bf097dc6667d19100e49b90a814c617ea827 Mon Sep 17 00:00:00 2001
From: Sachin Kamat <sachin.kamat@linaro.org>
Date: Wed, 28 Sep 2011 10:38:12 +0900
Subject: ARM: EXYNOS4: Add header file protection macros

This patch adds header file protection macros to prevent duplication.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/include/mach/pm-core.h | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/include/mach/pm-core.h b/arch/arm/mach-exynos4/include/mach/pm-core.h
index 3499ec73720..9d8da51e35c 100644
--- a/arch/arm/mach-exynos4/include/mach/pm-core.h
+++ b/arch/arm/mach-exynos4/include/mach/pm-core.h
@@ -14,6 +14,10 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
 */
+
+#ifndef __ASM_ARCH_PM_CORE_H
+#define __ASM_ARCH_PM_CORE_H __FILE__
+
 #include <mach/regs-pmu.h>
 
 static inline void s3c_pm_debug_init_uart(void)
@@ -57,3 +61,5 @@ static inline void samsung_pm_saved_gpios(void)
 {
 	/* nothing here yet */
 }
+
+#endif /* __ASM_ARCH_PM_CORE_H */
-- 
cgit v1.2.3-18-g5258


From 568f0e278c6dd33dc11bd19c4ad781d1f8d86800 Mon Sep 17 00:00:00 2001
From: Sachin Kamat <sachin.kamat@linaro.org>
Date: Wed, 28 Sep 2011 11:13:30 +0900
Subject: ARM: EXYNOS4: Add FIMC device on SMDKV310 board

This patch adds definitions to enable support for s5p-fimc driver on
SMDKV310 board.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/Kconfig         | 4 ++++
 arch/arm/mach-exynos4/mach-smdkv310.c | 4 ++++
 2 files changed, 8 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index c4068fd7b83..60b82e83a08 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -139,6 +139,10 @@ config MACH_SMDKV310
 	select S3C_DEV_RTC
 	select S3C_DEV_WDT
 	select S3C_DEV_I2C1
+	select S5P_DEV_FIMC0
+	select S5P_DEV_FIMC1
+	select S5P_DEV_FIMC2
+	select S5P_DEV_FIMC3
 	select S5P_DEV_I2C_HDMIPHY
 	select S5P_DEV_MFC
 	select S5P_DEV_TV
diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c
index 0fa734c1aa6..43738c086bc 100644
--- a/arch/arm/mach-exynos4/mach-smdkv310.c
+++ b/arch/arm/mach-exynos4/mach-smdkv310.c
@@ -189,6 +189,10 @@ static struct platform_device *smdkv310_devices[] __initdata = {
 	&s3c_device_rtc,
 	&s3c_device_wdt,
 	&s5p_device_ehci,
+	&s5p_device_fimc0,
+	&s5p_device_fimc1,
+	&s5p_device_fimc2,
+	&s5p_device_fimc3,
 	&exynos4_device_ac97,
 	&exynos4_device_i2s0,
 	&samsung_device_keypad,
-- 
cgit v1.2.3-18-g5258


From 909ceef6827c579e767f093b422313945f9cba53 Mon Sep 17 00:00:00 2001
From: Thomas Abraham <thomas.abraham@linaro.org>
Date: Wed, 28 Sep 2011 10:59:34 +0900
Subject: ARM: SAMSUNG: remove sdhci default configuration setup platform
 helper

The sdhci platform helper function that sets up the default controller
configuration is removed for all Samsung platforms since such default
controller configuration can be handled by the driver.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/setup-sdhci.c        | 47 ------------------------
 arch/arm/mach-s3c2416/setup-sdhci.c        | 37 -------------------
 arch/arm/mach-s3c64xx/setup-sdhci.c        | 48 -------------------------
 arch/arm/mach-s5pc100/setup-sdhci.c        | 42 ----------------------
 arch/arm/mach-s5pv210/setup-sdhci.c        | 41 ---------------------
 arch/arm/plat-samsung/include/plat/sdhci.h | 57 ------------------------------
 arch/arm/plat-samsung/platformdata.c       |  2 --
 7 files changed, 274 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/setup-sdhci.c b/arch/arm/mach-exynos4/setup-sdhci.c
index 1e83f8cf236..92937b41090 100644
--- a/arch/arm/mach-exynos4/setup-sdhci.c
+++ b/arch/arm/mach-exynos4/setup-sdhci.c
@@ -10,16 +10,7 @@
  * published by the Free Software Foundation.
 */
 
-#include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
 
 /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
 
@@ -29,41 +20,3 @@ char *exynos4_hsmmc_clksrcs[4] = {
 	[2] = "sclk_mmc",	/* mmc_bus */
 	[3] = NULL,
 };
-
-void exynos4_setup_sdhci_cfg_card(struct platform_device *dev, void __iomem *r,
-				  struct mmc_ios *ios, struct mmc_card *card)
-{
-	u32 ctrl2, ctrl3;
-
-	/* don't need to alter anything according to card-type */
-
-	ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
-
-	/* select base clock source to HCLK */
-
-	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
-
-	/*
-	 * clear async mode, enable conflict mask, rx feedback ctrl, SD
-	 * clk hold and no use debounce count
-	 */
-
-	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
-		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
-		  S3C_SDHCI_CTRL2_ENFBCLKRX |
-		  S3C_SDHCI_CTRL2_DFCNT_NONE |
-		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
-	/* Tx and Rx feedback clock delay control */
-
-	if (ios->clock < 25 * 1000000)
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
-			 S3C_SDHCI_CTRL3_FCSEL2 |
-			 S3C_SDHCI_CTRL3_FCSEL1 |
-			 S3C_SDHCI_CTRL3_FCSEL0);
-	else
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
-	writel(ctrl2, r + S3C_SDHCI_CONTROL2);
-	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}
diff --git a/arch/arm/mach-s3c2416/setup-sdhci.c b/arch/arm/mach-s3c2416/setup-sdhci.c
index ed34fad8f2c..cee53955eb0 100644
--- a/arch/arm/mach-s3c2416/setup-sdhci.c
+++ b/arch/arm/mach-s3c2416/setup-sdhci.c
@@ -12,17 +12,7 @@
  * published by the Free Software Foundation.
 */
 
-#include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
-#include <plat/sdhci.h>
 
 /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
 
@@ -32,30 +22,3 @@ char *s3c2416_hsmmc_clksrcs[4] = {
 	[2] = "hsmmc-if",
 	/* [3] = "48m", - note not successfully used yet */
 };
-
-void s3c2416_setup_sdhci_cfg_card(struct platform_device *dev,
-				  void __iomem *r,
-				  struct mmc_ios *ios,
-				  struct mmc_card *card)
-{
-	u32 ctrl2, ctrl3;
-
-	ctrl2 = __raw_readl(r + S3C_SDHCI_CONTROL2);
-	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
-	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
-		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
-		  S3C_SDHCI_CTRL2_ENFBCLKRX |
-		  S3C_SDHCI_CTRL2_DFCNT_NONE |
-		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
-	if (ios->clock < 25 * 1000000)
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
-			 S3C_SDHCI_CTRL3_FCSEL2 |
-			 S3C_SDHCI_CTRL3_FCSEL1 |
-			 S3C_SDHCI_CTRL3_FCSEL0);
-	else
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
-	__raw_writel(ctrl2, r + S3C_SDHCI_CONTROL2);
-	__raw_writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}
diff --git a/arch/arm/mach-s3c64xx/setup-sdhci.c b/arch/arm/mach-s3c64xx/setup-sdhci.c
index f344a222bc8..c75a71b2116 100644
--- a/arch/arm/mach-s3c64xx/setup-sdhci.c
+++ b/arch/arm/mach-s3c64xx/setup-sdhci.c
@@ -12,17 +12,7 @@
  * published by the Free Software Foundation.
 */
 
-#include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
-#include <plat/sdhci.h>
 
 /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
 
@@ -32,41 +22,3 @@ char *s3c64xx_hsmmc_clksrcs[4] = {
 	[2] = "mmc_bus",
 	/* [3] = "48m", - note not successfully used yet */
 };
-
-void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
-				  void __iomem *r,
-				  struct mmc_ios *ios,
-				  struct mmc_card *card)
-{
-	u32 ctrl2, ctrl3;
-
-	ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
-	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
-	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
-		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
-		  S3C_SDHCI_CTRL2_ENFBCLKRX |
-		  S3C_SDHCI_CTRL2_DFCNT_NONE |
-		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
-	if (ios->clock < 25 * 1000000)
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
-			 S3C_SDHCI_CTRL3_FCSEL2 |
-			 S3C_SDHCI_CTRL3_FCSEL1 |
-			 S3C_SDHCI_CTRL3_FCSEL0);
-	else
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
-	pr_debug("%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
-	writel(ctrl2, r + S3C_SDHCI_CONTROL2);
-	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}
-
-void s3c6410_setup_sdhci_cfg_card(struct platform_device *dev,
-				  void __iomem *r,
-				  struct mmc_ios *ios,
-				  struct mmc_card *card)
-{
-	writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
-
-	s3c6400_setup_sdhci_cfg_card(dev, r, ios, card);
-}
diff --git a/arch/arm/mach-s5pc100/setup-sdhci.c b/arch/arm/mach-s5pc100/setup-sdhci.c
index be25879bb2e..6418c6e8a7b 100644
--- a/arch/arm/mach-s5pc100/setup-sdhci.c
+++ b/arch/arm/mach-s5pc100/setup-sdhci.c
@@ -11,17 +11,7 @@
  * published by the Free Software Foundation.
 */
 
-#include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
-#include <plat/sdhci.h>
 
 /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
 
@@ -31,35 +21,3 @@ char *s5pc100_hsmmc_clksrcs[4] = {
 	[2] = "sclk_mmc",	/* mmc_bus */
 	/* [3] = "48m",		- note not successfully used yet */
 };
-
-
-void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev,
-				    void __iomem *r,
-				    struct mmc_ios *ios,
-				    struct mmc_card *card)
-{
-	u32 ctrl2, ctrl3;
-
-	/* don't need to alter anything according to card-type */
-
-	writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
-
-	ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
-	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
-	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
-		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
-		  S3C_SDHCI_CTRL2_ENFBCLKRX |
-		  S3C_SDHCI_CTRL2_DFCNT_NONE |
-		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
-	if (ios->clock < 25 * 1000000)
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
-			 S3C_SDHCI_CTRL3_FCSEL2 |
-			 S3C_SDHCI_CTRL3_FCSEL1 |
-			 S3C_SDHCI_CTRL3_FCSEL0);
-	else
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
-	writel(ctrl2, r + S3C_SDHCI_CONTROL2);
-	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}
diff --git a/arch/arm/mach-s5pv210/setup-sdhci.c b/arch/arm/mach-s5pv210/setup-sdhci.c
index a83b6c909f6..6b8ccc4d35f 100644
--- a/arch/arm/mach-s5pv210/setup-sdhci.c
+++ b/arch/arm/mach-s5pv210/setup-sdhci.c
@@ -10,17 +10,7 @@
  * published by the Free Software Foundation.
 */
 
-#include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
-#include <plat/sdhci.h>
 
 /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
 
@@ -30,34 +20,3 @@ char *s5pv210_hsmmc_clksrcs[4] = {
 	[2] = "sclk_mmc",	/* mmc_bus */
 	/* [3] = NULL,		- reserved */
 };
-
-void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev,
-				    void __iomem *r,
-				    struct mmc_ios *ios,
-				    struct mmc_card *card)
-{
-	u32 ctrl2, ctrl3;
-
-	/* don't need to alter anything according to card-type */
-
-	writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
-
-	ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
-	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
-	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
-		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
-		  S3C_SDHCI_CTRL2_ENFBCLKRX |
-		  S3C_SDHCI_CTRL2_DFCNT_NONE |
-		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
-	if (ios->clock < 25 * 1000000)
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
-			 S3C_SDHCI_CTRL3_FCSEL2 |
-			 S3C_SDHCI_CTRL3_FCSEL1 |
-			 S3C_SDHCI_CTRL3_FCSEL0);
-	else
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
-	writel(ctrl2, r + S3C_SDHCI_CONTROL2);
-	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index 4a6552066c7..e7b3c752e91 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -55,10 +55,6 @@ enum clk_types {
  *		 cd_type == S3C_SDHCI_CD_GPIO
  * @ext_cd_gpio_invert: invert values for external CD gpio line
  * @cfg_gpio: Configure the GPIO for a specific card bit-width
- * @cfg_card: Configure the interface for a specific card and speed. This
- *            is necessary the controllers and/or GPIO blocks require the
- *	      changing of driver-strength and other controls dependent on
- *	      the card and speed of operation.
  *
  * Initialisation data specific to either the machine or the platform
  * for the device driver to use or call-back when configuring gpio or
@@ -80,10 +76,6 @@ struct s3c_sdhci_platdata {
 						      int state));
 
 	void	(*cfg_gpio)(struct platform_device *dev, int width);
-	void	(*cfg_card)(struct platform_device *dev,
-			    void __iomem *regbase,
-			    struct mmc_ios *ios,
-			    struct mmc_card *card);
 };
 
 /* s3c_sdhci_set_platdata() - common helper for setting SDHCI platform data
@@ -139,17 +131,11 @@ extern void exynos4_setup_sdhci3_cfg_gpio(struct platform_device *, int w);
 #ifdef CONFIG_S3C2416_SETUP_SDHCI
 extern char *s3c2416_hsmmc_clksrcs[4];
 
-extern void s3c2416_setup_sdhci_cfg_card(struct platform_device *dev,
-					   void __iomem *r,
-					   struct mmc_ios *ios,
-					   struct mmc_card *card);
-
 static inline void s3c2416_default_sdhci0(void)
 {
 #ifdef CONFIG_S3C_DEV_HSMMC
 	s3c_hsmmc0_def_platdata.clocks = s3c2416_hsmmc_clksrcs;
 	s3c_hsmmc0_def_platdata.cfg_gpio = s3c2416_setup_sdhci0_cfg_gpio;
-	s3c_hsmmc0_def_platdata.cfg_card = s3c2416_setup_sdhci_cfg_card;
 #endif /* CONFIG_S3C_DEV_HSMMC */
 }
 
@@ -158,7 +144,6 @@ static inline void s3c2416_default_sdhci1(void)
 #ifdef CONFIG_S3C_DEV_HSMMC1
 	s3c_hsmmc1_def_platdata.clocks = s3c2416_hsmmc_clksrcs;
 	s3c_hsmmc1_def_platdata.cfg_gpio = s3c2416_setup_sdhci1_cfg_gpio;
-	s3c_hsmmc1_def_platdata.cfg_card = s3c2416_setup_sdhci_cfg_card;
 #endif /* CONFIG_S3C_DEV_HSMMC1 */
 }
 
@@ -172,17 +157,11 @@ static inline void s3c2416_default_sdhci1(void) { }
 #ifdef CONFIG_S3C64XX_SETUP_SDHCI
 extern char *s3c64xx_hsmmc_clksrcs[4];
 
-extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
-					 void __iomem *r,
-					 struct mmc_ios *ios,
-					 struct mmc_card *card);
-
 static inline void s3c6400_default_sdhci0(void)
 {
 #ifdef CONFIG_S3C_DEV_HSMMC
 	s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
-	s3c_hsmmc0_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
 #endif
 }
 
@@ -191,7 +170,6 @@ static inline void s3c6400_default_sdhci1(void)
 #ifdef CONFIG_S3C_DEV_HSMMC1
 	s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
-	s3c_hsmmc1_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
 #endif
 }
 
@@ -200,21 +178,14 @@ static inline void s3c6400_default_sdhci2(void)
 #ifdef CONFIG_S3C_DEV_HSMMC2
 	s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
-	s3c_hsmmc2_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
 #endif
 }
 
-extern void s3c6410_setup_sdhci_cfg_card(struct platform_device *dev,
-					 void __iomem *r,
-					 struct mmc_ios *ios,
-					 struct mmc_card *card);
-
 static inline void s3c6410_default_sdhci0(void)
 {
 #ifdef CONFIG_S3C_DEV_HSMMC
 	s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
-	s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
 #endif
 }
 
@@ -223,7 +194,6 @@ static inline void s3c6410_default_sdhci1(void)
 #ifdef CONFIG_S3C_DEV_HSMMC1
 	s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
-	s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
 #endif
 }
 
@@ -232,7 +202,6 @@ static inline void s3c6410_default_sdhci2(void)
 #ifdef CONFIG_S3C_DEV_HSMMC2
 	s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
-	s3c_hsmmc2_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
 #endif
 }
 
@@ -251,17 +220,11 @@ static inline void s3c6400_default_sdhci2(void) { }
 #ifdef CONFIG_S5PC100_SETUP_SDHCI
 extern char *s5pc100_hsmmc_clksrcs[4];
 
-extern void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev,
-					   void __iomem *r,
-					   struct mmc_ios *ios,
-					   struct mmc_card *card);
-
 static inline void s5pc100_default_sdhci0(void)
 {
 #ifdef CONFIG_S3C_DEV_HSMMC
 	s3c_hsmmc0_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
 	s3c_hsmmc0_def_platdata.cfg_gpio = s5pc100_setup_sdhci0_cfg_gpio;
-	s3c_hsmmc0_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
 #endif
 }
 
@@ -270,7 +233,6 @@ static inline void s5pc100_default_sdhci1(void)
 #ifdef CONFIG_S3C_DEV_HSMMC1
 	s3c_hsmmc1_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
 	s3c_hsmmc1_def_platdata.cfg_gpio = s5pc100_setup_sdhci1_cfg_gpio;
-	s3c_hsmmc1_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
 #endif
 }
 
@@ -279,7 +241,6 @@ static inline void s5pc100_default_sdhci2(void)
 #ifdef CONFIG_S3C_DEV_HSMMC2
 	s3c_hsmmc2_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
 	s3c_hsmmc2_def_platdata.cfg_gpio = s5pc100_setup_sdhci2_cfg_gpio;
-	s3c_hsmmc2_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
 #endif
 }
 
@@ -295,17 +256,11 @@ static inline void s5pc100_default_sdhci2(void) { }
 #ifdef CONFIG_S5PV210_SETUP_SDHCI
 extern char *s5pv210_hsmmc_clksrcs[4];
 
-extern void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev,
-					   void __iomem *r,
-					   struct mmc_ios *ios,
-					   struct mmc_card *card);
-
 static inline void s5pv210_default_sdhci0(void)
 {
 #ifdef CONFIG_S3C_DEV_HSMMC
 	s3c_hsmmc0_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
 	s3c_hsmmc0_def_platdata.cfg_gpio = s5pv210_setup_sdhci0_cfg_gpio;
-	s3c_hsmmc0_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
 #endif
 }
 
@@ -314,7 +269,6 @@ static inline void s5pv210_default_sdhci1(void)
 #ifdef CONFIG_S3C_DEV_HSMMC1
 	s3c_hsmmc1_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
 	s3c_hsmmc1_def_platdata.cfg_gpio = s5pv210_setup_sdhci1_cfg_gpio;
-	s3c_hsmmc1_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
 #endif
 }
 
@@ -323,7 +277,6 @@ static inline void s5pv210_default_sdhci2(void)
 #ifdef CONFIG_S3C_DEV_HSMMC2
 	s3c_hsmmc2_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
 	s3c_hsmmc2_def_platdata.cfg_gpio = s5pv210_setup_sdhci2_cfg_gpio;
-	s3c_hsmmc2_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
 #endif
 }
 
@@ -332,7 +285,6 @@ static inline void s5pv210_default_sdhci3(void)
 #ifdef CONFIG_S3C_DEV_HSMMC3
 	s3c_hsmmc3_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
 	s3c_hsmmc3_def_platdata.cfg_gpio = s5pv210_setup_sdhci3_cfg_gpio;
-	s3c_hsmmc3_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
 #endif
 }
 
@@ -348,17 +300,11 @@ static inline void s5pv210_default_sdhci3(void) { }
 #ifdef CONFIG_EXYNOS4_SETUP_SDHCI
 extern char *exynos4_hsmmc_clksrcs[4];
 
-extern void exynos4_setup_sdhci_cfg_card(struct platform_device *dev,
-					   void __iomem *r,
-					   struct mmc_ios *ios,
-					   struct mmc_card *card);
-
 static inline void exynos4_default_sdhci0(void)
 {
 #ifdef CONFIG_S3C_DEV_HSMMC
 	s3c_hsmmc0_def_platdata.clocks = exynos4_hsmmc_clksrcs;
 	s3c_hsmmc0_def_platdata.cfg_gpio = exynos4_setup_sdhci0_cfg_gpio;
-	s3c_hsmmc0_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card;
 #endif
 }
 
@@ -367,7 +313,6 @@ static inline void exynos4_default_sdhci1(void)
 #ifdef CONFIG_S3C_DEV_HSMMC1
 	s3c_hsmmc1_def_platdata.clocks = exynos4_hsmmc_clksrcs;
 	s3c_hsmmc1_def_platdata.cfg_gpio = exynos4_setup_sdhci1_cfg_gpio;
-	s3c_hsmmc1_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card;
 #endif
 }
 
@@ -376,7 +321,6 @@ static inline void exynos4_default_sdhci2(void)
 #ifdef CONFIG_S3C_DEV_HSMMC2
 	s3c_hsmmc2_def_platdata.clocks = exynos4_hsmmc_clksrcs;
 	s3c_hsmmc2_def_platdata.cfg_gpio = exynos4_setup_sdhci2_cfg_gpio;
-	s3c_hsmmc2_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card;
 #endif
 }
 
@@ -385,7 +329,6 @@ static inline void exynos4_default_sdhci3(void)
 #ifdef CONFIG_S3C_DEV_HSMMC3
 	s3c_hsmmc3_def_platdata.clocks = exynos4_hsmmc_clksrcs;
 	s3c_hsmmc3_def_platdata.cfg_gpio = exynos4_setup_sdhci3_cfg_gpio;
-	s3c_hsmmc3_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card;
 #endif
 }
 
diff --git a/arch/arm/plat-samsung/platformdata.c b/arch/arm/plat-samsung/platformdata.c
index 6de1a382592..4c9a20734fe 100644
--- a/arch/arm/plat-samsung/platformdata.c
+++ b/arch/arm/plat-samsung/platformdata.c
@@ -50,8 +50,6 @@ void s3c_sdhci_set_platdata(struct s3c_sdhci_platdata *pd,
 		set->max_width = pd->max_width;
 	if (pd->cfg_gpio)
 		set->cfg_gpio = pd->cfg_gpio;
-	if (pd->cfg_card)
-		set->cfg_card = pd->cfg_card;
 	if (pd->host_caps)
 		set->host_caps |= pd->host_caps;
 	if (pd->clk_type)
-- 
cgit v1.2.3-18-g5258


From 4b2656fe4957a20edeecc0991616b9b96512839b Mon Sep 17 00:00:00 2001
From: Kukjin Kim <kgene.kim@samsung.com>
Date: Tue, 20 Sep 2011 08:39:09 +0900
Subject: ARM: SAMSUNG: Cleanup mach/clkdev.h

According to commit a3831cf ("ARM: Consolidate the
clkdev header files"), current mach/clkdev.h is no
needed in Samsung stuff.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/include/mach/clkdev.h | 7 -------
 arch/arm/mach-s3c64xx/include/mach/clkdev.h | 7 -------
 arch/arm/mach-s5p64x0/include/mach/clkdev.h | 7 -------
 arch/arm/mach-s5pc100/include/mach/clkdev.h | 7 -------
 arch/arm/mach-s5pv210/include/mach/clkdev.h | 7 -------
 arch/arm/plat-s3c24xx/include/mach/clkdev.h | 7 -------
 6 files changed, 42 deletions(-)
 delete mode 100644 arch/arm/mach-exynos4/include/mach/clkdev.h
 delete mode 100644 arch/arm/mach-s3c64xx/include/mach/clkdev.h
 delete mode 100644 arch/arm/mach-s5p64x0/include/mach/clkdev.h
 delete mode 100644 arch/arm/mach-s5pc100/include/mach/clkdev.h
 delete mode 100644 arch/arm/mach-s5pv210/include/mach/clkdev.h
 delete mode 100644 arch/arm/plat-s3c24xx/include/mach/clkdev.h

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/include/mach/clkdev.h b/arch/arm/mach-exynos4/include/mach/clkdev.h
deleted file mode 100644
index 7dffa83d23f..00000000000
--- a/arch/arm/mach-exynos4/include/mach/clkdev.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __MACH_CLKDEV_H__
-#define __MACH_CLKDEV_H__
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do {} while (0)
-
-#endif
diff --git a/arch/arm/mach-s3c64xx/include/mach/clkdev.h b/arch/arm/mach-s3c64xx/include/mach/clkdev.h
deleted file mode 100644
index 7dffa83d23f..00000000000
--- a/arch/arm/mach-s3c64xx/include/mach/clkdev.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __MACH_CLKDEV_H__
-#define __MACH_CLKDEV_H__
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do {} while (0)
-
-#endif
diff --git a/arch/arm/mach-s5p64x0/include/mach/clkdev.h b/arch/arm/mach-s5p64x0/include/mach/clkdev.h
deleted file mode 100644
index 7dffa83d23f..00000000000
--- a/arch/arm/mach-s5p64x0/include/mach/clkdev.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __MACH_CLKDEV_H__
-#define __MACH_CLKDEV_H__
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do {} while (0)
-
-#endif
diff --git a/arch/arm/mach-s5pc100/include/mach/clkdev.h b/arch/arm/mach-s5pc100/include/mach/clkdev.h
deleted file mode 100644
index 7dffa83d23f..00000000000
--- a/arch/arm/mach-s5pc100/include/mach/clkdev.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __MACH_CLKDEV_H__
-#define __MACH_CLKDEV_H__
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do {} while (0)
-
-#endif
diff --git a/arch/arm/mach-s5pv210/include/mach/clkdev.h b/arch/arm/mach-s5pv210/include/mach/clkdev.h
deleted file mode 100644
index 7dffa83d23f..00000000000
--- a/arch/arm/mach-s5pv210/include/mach/clkdev.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __MACH_CLKDEV_H__
-#define __MACH_CLKDEV_H__
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do {} while (0)
-
-#endif
diff --git a/arch/arm/plat-s3c24xx/include/mach/clkdev.h b/arch/arm/plat-s3c24xx/include/mach/clkdev.h
deleted file mode 100644
index 7dffa83d23f..00000000000
--- a/arch/arm/plat-s3c24xx/include/mach/clkdev.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __MACH_CLKDEV_H__
-#define __MACH_CLKDEV_H__
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do {} while (0)
-
-#endif
-- 
cgit v1.2.3-18-g5258


From c0468b0244464a9d85e527fd0bfee91caed697a7 Mon Sep 17 00:00:00 2001
From: Kukjin Kim <kgene.kim@samsung.com>
Date: Tue, 20 Sep 2011 08:44:38 +0900
Subject: ARM: SAMSUNG: Consolidate plat/pwm-clock.h

Removed
 - arch/arm/plat-s3c24xx/include/mach/pwm-clock.h
 - arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
 - arch/arm/mach-s5p64x0/include/mach/pwm-clock.h
 - arch/arm/mach-s5pc100/include/mach/pwm-clock.h
 - arch/arm/mach-s5pv210/include/mach/pwm-clock.h
 - arch/arm/mach-exynos4/include/mach/pwm-clock.h

And created
 - arch/arm/plat-samsung/include/plat/pwm-clock.h

Cc: Ben Dooks <ben-linux@fluff.org>
[kgene.kim@samsung.com: changed title]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/include/mach/pwm-clock.h | 70 ----------------------
 arch/arm/mach-s3c64xx/include/mach/pwm-clock.h | 56 ------------------
 arch/arm/mach-s5p64x0/include/mach/pwm-clock.h | 68 ---------------------
 arch/arm/mach-s5pc100/include/mach/pwm-clock.h | 56 ------------------
 arch/arm/mach-s5pv210/include/mach/pwm-clock.h | 70 ----------------------
 arch/arm/plat-s3c24xx/include/mach/pwm-clock.h | 55 -----------------
 arch/arm/plat-samsung/include/plat/pwm-clock.h | 81 ++++++++++++++++++++++++++
 arch/arm/plat-samsung/pwm-clock.c              | 13 ++++-
 8 files changed, 92 insertions(+), 377 deletions(-)
 delete mode 100644 arch/arm/mach-exynos4/include/mach/pwm-clock.h
 delete mode 100644 arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
 delete mode 100644 arch/arm/mach-s5p64x0/include/mach/pwm-clock.h
 delete mode 100644 arch/arm/mach-s5pc100/include/mach/pwm-clock.h
 delete mode 100644 arch/arm/mach-s5pv210/include/mach/pwm-clock.h
 delete mode 100644 arch/arm/plat-s3c24xx/include/mach/pwm-clock.h
 create mode 100644 arch/arm/plat-samsung/include/plat/pwm-clock.h

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/include/mach/pwm-clock.h b/arch/arm/mach-exynos4/include/mach/pwm-clock.h
deleted file mode 100644
index 8e12090287b..00000000000
--- a/arch/arm/mach-exynos4/include/mach/pwm-clock.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/pwm-clock.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
- *
- * EXYNOS4 - pwm clock and timer support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_PWMCLK_H
-#define __ASM_ARCH_PWMCLK_H __FILE__
-
-/**
- * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @tcfg: The timer TCFG1 register bits shifted down to 0.
- *
- * Return true if the given configuration from TCFG1 is a TCLK instead
- * any of the TDIV clocks.
- */
-static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
-{
-	return tcfg == S3C64XX_TCFG1_MUX_TCLK;
-}
-
-/**
- * tcfg_to_divisor() - convert tcfg1 setting to a divisor
- * @tcfg1: The tcfg1 setting, shifted down.
- *
- * Get the divisor value for the given tcfg1 setting. We assume the
- * caller has already checked to see if this is not a TCLK source.
- */
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
-	return 1 << tcfg1;
-}
-
-/**
- * pwm_tdiv_has_div1() - does the tdiv setting have a /1
- *
- * Return true if we have a /1 in the tdiv setting.
- */
-static inline unsigned int pwm_tdiv_has_div1(void)
-{
-	return 1;
-}
-
-/**
- * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
- * @div: The divisor to calculate the bit information for.
- *
- * Turn a divisor into the necessary bit field for TCFG1.
- */
-static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
-{
-	return ilog2(div);
-}
-
-#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
-
-#endif /* __ASM_ARCH_PWMCLK_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/pwm-clock.h b/arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
deleted file mode 100644
index b25bedee0d5..00000000000
--- a/arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/* linux/arch/arm/mach-s3c6400/include/mach/pwm-clock.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64xx - pwm clock and timer support
- */
-
-/**
- * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @tcfg: The timer TCFG1 register bits shifted down to 0.
- *
- * Return true if the given configuration from TCFG1 is a TCLK instead
- * any of the TDIV clocks.
- */
-static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
-{
-	return tcfg >= S3C64XX_TCFG1_MUX_TCLK;
-}
-
-/**
- * tcfg_to_divisor() - convert tcfg1 setting to a divisor
- * @tcfg1: The tcfg1 setting, shifted down.
- *
- * Get the divisor value for the given tcfg1 setting. We assume the
- * caller has already checked to see if this is not a TCLK source.
- */
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
-	return 1 << tcfg1;
-}
-
-/**
- * pwm_tdiv_has_div1() - does the tdiv setting have a /1
- *
- * Return true if we have a /1 in the tdiv setting.
- */
-static inline unsigned int pwm_tdiv_has_div1(void)
-{
-	return 1;
-}
-
-/**
- * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
- * @div: The divisor to calculate the bit information for.
- *
- * Turn a divisor into the necessary bit field for TCFG1.
- */
-static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
-{
-	return ilog2(div);
-}
-
-#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
diff --git a/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h b/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h
deleted file mode 100644
index 19fff8b701c..00000000000
--- a/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S5P64X0 - pwm clock and timer support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_PWMCLK_H
-#define __ASM_ARCH_PWMCLK_H __FILE__
-
-/**
- * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @tcfg: The timer TCFG1 register bits shifted down to 0.
- *
- * Return true if the given configuration from TCFG1 is a TCLK instead
- * any of the TDIV clocks.
- */
-static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
-{
-	return 0;
-}
-
-/**
- * tcfg_to_divisor() - convert tcfg1 setting to a divisor
- * @tcfg1: The tcfg1 setting, shifted down.
- *
- * Get the divisor value for the given tcfg1 setting. We assume the
- * caller has already checked to see if this is not a TCLK source.
- */
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
-	return 1 << tcfg1;
-}
-
-/**
- * pwm_tdiv_has_div1() - does the tdiv setting have a /1
- *
- * Return true if we have a /1 in the tdiv setting.
- */
-static inline unsigned int pwm_tdiv_has_div1(void)
-{
-	return 1;
-}
-
-/**
- * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
- * @div: The divisor to calculate the bit information for.
- *
- * Turn a divisor into the necessary bit field for TCFG1.
- */
-static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
-{
-	return ilog2(div);
-}
-
-#define S3C_TCFG1_MUX_TCLK 0
-
-#endif /* __ASM_ARCH_PWMCLK_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/pwm-clock.h b/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
deleted file mode 100644
index b34d2f7aae5..00000000000
--- a/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *      Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - pwm clock and timer support
- *
- * Based on mach-s3c6400/include/mach/pwm-clock.h
- */
-
-/**
- * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @tcfg: The timer TCFG1 register bits shifted down to 0.
- *
- * Return true if the given configuration from TCFG1 is a TCLK instead
- * any of the TDIV clocks.
- */
-static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
-{
-	return tcfg >= S3C64XX_TCFG1_MUX_TCLK;
-}
-
-/**
- * tcfg_to_divisor() - convert tcfg1 setting to a divisor
- * @tcfg1: The tcfg1 setting, shifted down.
- *
- * Get the divisor value for the given tcfg1 setting. We assume the
- * caller has already checked to see if this is not a TCLK source.
- */
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
-	return 1 << tcfg1;
-}
-
-/**
- * pwm_tdiv_has_div1() - does the tdiv setting have a /1
- *
- * Return true if we have a /1 in the tdiv setting.
- */
-static inline unsigned int pwm_tdiv_has_div1(void)
-{
-	return 1;
-}
-
-/**
- * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
- * @div: The divisor to calculate the bit information for.
- *
- * Turn a divisor into the necessary bit field for TCFG1.
- */
-static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
-{
-	return ilog2(div);
-}
-
-#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
diff --git a/arch/arm/mach-s5pv210/include/mach/pwm-clock.h b/arch/arm/mach-s5pv210/include/mach/pwm-clock.h
deleted file mode 100644
index f8a9f1b330e..00000000000
--- a/arch/arm/mach-s5pv210/include/mach/pwm-clock.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/pwm-clock.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
- *
- * S5PV210 - pwm clock and timer support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_PWMCLK_H
-#define __ASM_ARCH_PWMCLK_H __FILE__
-
-/**
- * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @tcfg: The timer TCFG1 register bits shifted down to 0.
- *
- * Return true if the given configuration from TCFG1 is a TCLK instead
- * any of the TDIV clocks.
- */
-static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
-{
-	return tcfg == S3C64XX_TCFG1_MUX_TCLK;
-}
-
-/**
- * tcfg_to_divisor() - convert tcfg1 setting to a divisor
- * @tcfg1: The tcfg1 setting, shifted down.
- *
- * Get the divisor value for the given tcfg1 setting. We assume the
- * caller has already checked to see if this is not a TCLK source.
- */
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
-	return 1 << tcfg1;
-}
-
-/**
- * pwm_tdiv_has_div1() - does the tdiv setting have a /1
- *
- * Return true if we have a /1 in the tdiv setting.
- */
-static inline unsigned int pwm_tdiv_has_div1(void)
-{
-	return 1;
-}
-
-/**
- * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
- * @div: The divisor to calculate the bit information for.
- *
- * Turn a divisor into the necessary bit field for TCFG1.
- */
-static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
-{
-	return ilog2(div);
-}
-
-#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
-
-#endif /* __ASM_ARCH_PWMCLK_H */
diff --git a/arch/arm/plat-s3c24xx/include/mach/pwm-clock.h b/arch/arm/plat-s3c24xx/include/mach/pwm-clock.h
deleted file mode 100644
index a087de21bc2..00000000000
--- a/arch/arm/plat-s3c24xx/include/mach/pwm-clock.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/include/mach/pwm-clock.h
- *
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C24xx - pwm clock and timer support
- */
-
-/**
- * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @cfg: The timer TCFG1 register bits shifted down to 0.
- *
- * Return true if the given configuration from TCFG1 is a TCLK instead
- * any of the TDIV clocks.
- */
-static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
-{
-	return tcfg == S3C2410_TCFG1_MUX_TCLK;
-}
-
-/**
- * tcfg_to_divisor() - convert tcfg1 setting to a divisor
- * @tcfg1: The tcfg1 setting, shifted down.
- *
- * Get the divisor value for the given tcfg1 setting. We assume the
- * caller has already checked to see if this is not a TCLK source.
- */
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
-	return 1 << (1 + tcfg1);
-}
-
-/**
- * pwm_tdiv_has_div1() - does the tdiv setting have a /1
- *
- * Return true if we have a /1 in the tdiv setting.
- */
-static inline unsigned int pwm_tdiv_has_div1(void)
-{
-	return 0;
-}
-
-/**
- * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
- * @div: The divisor to calculate the bit information for.
- *
- * Turn a divisor into the necessary bit field for TCFG1.
- */
-static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
-{
-	return ilog2(div) - 1;
-}
-
-#define S3C_TCFG1_MUX_TCLK S3C2410_TCFG1_MUX_TCLK
diff --git a/arch/arm/plat-samsung/include/plat/pwm-clock.h b/arch/arm/plat-samsung/include/plat/pwm-clock.h
new file mode 100644
index 00000000000..bf6a60eb623
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/pwm-clock.h
@@ -0,0 +1,81 @@
+/* linux/arch/arm/plat-samsung/include/plat/pwm-clock.h
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * SAMSUNG - pwm clock and timer support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_PWM_CLOCK_H
+#define __ASM_PLAT_PWM_CLOCK_H __FILE__
+
+/**
+ * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
+ * @tcfg: The timer TCFG1 register bits shifted down to 0.
+ *
+ * Return true if the given configuration from TCFG1 is a TCLK instead
+ * any of the TDIV clocks.
+ */
+static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
+{
+	if (soc_is_s3c24xx())
+		return tcfg == S3C2410_TCFG1_MUX_TCLK;
+	else if (soc_is_s3c64xx() || soc_is_s5pc100())
+		return tcfg >= S3C64XX_TCFG1_MUX_TCLK;
+	else if (soc_is_s5p6440() || soc_is_s5p6450())
+		return 0;
+	else
+		return tcfg == S3C64XX_TCFG1_MUX_TCLK;
+}
+
+/**
+ * tcfg_to_divisor() - convert tcfg1 setting to a divisor
+ * @tcfg1: The tcfg1 setting, shifted down.
+ *
+ * Get the divisor value for the given tcfg1 setting. We assume the
+ * caller has already checked to see if this is not a TCLK source.
+ */
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+	if (soc_is_s3c24xx())
+		return 1 << (tcfg1 + 1);
+	else
+		return 1 << tcfg1;
+}
+
+/**
+ * pwm_tdiv_has_div1() - does the tdiv setting have a /1
+ *
+ * Return true if we have a /1 in the tdiv setting.
+ */
+static inline unsigned int pwm_tdiv_has_div1(void)
+{
+	if (soc_is_s3c24xx())
+		return 0;
+	else
+		return 1;
+}
+
+/**
+ * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
+ * @div: The divisor to calculate the bit information for.
+ *
+ * Turn a divisor into the necessary bit field for TCFG1.
+ */
+static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
+{
+	if (soc_is_s3c24xx())
+		return ilog2(div) - 1;
+	else
+		return ilog2(div);
+}
+#endif /* __ASM_PLAT_PWM_CLOCK_H */
diff --git a/arch/arm/plat-samsung/pwm-clock.c b/arch/arm/plat-samsung/pwm-clock.c
index f1bba88ed2f..a35ff3bcffe 100644
--- a/arch/arm/plat-samsung/pwm-clock.c
+++ b/arch/arm/plat-samsung/pwm-clock.c
@@ -27,7 +27,7 @@
 #include <plat/cpu.h>
 
 #include <plat/regs-timer.h>
-#include <mach/pwm-clock.h>
+#include <plat/pwm-clock.h>
 
 /* Each of the timers 0 through 5 go through the following
  * clock tree, with the inputs depending on the timers.
@@ -339,8 +339,17 @@ static int clk_pwm_tin_set_parent(struct clk *clk, struct clk *parent)
 	unsigned long bits;
 	unsigned long shift = S3C2410_TCFG1_SHIFT(id);
 
+	unsigned long mux_tclk;
+
+	if (soc_is_s3c24xx())
+		mux_tclk = S3C2410_TCFG1_MUX_TCLK;
+	else if (soc_is_s5p6440() || soc_is_s5p6450())
+		mux_tclk = 0;
+	else
+		mux_tclk = S3C64XX_TCFG1_MUX_TCLK;
+
 	if (parent == s3c24xx_pwmclk_tclk(id))
-		bits = S3C_TCFG1_MUX_TCLK << shift;
+		bits = mux_tclk << shift;
 	else if (parent == s3c24xx_pwmclk_tdiv(id))
 		bits = clk_pwm_tdiv_bits(to_tdiv(parent)) << shift;
 	else
-- 
cgit v1.2.3-18-g5258


From 52e329ebb05983153bbde7351c94449018651290 Mon Sep 17 00:00:00 2001
From: Kukjin Kim <kgene.kim@samsung.com>
Date: Tue, 4 Oct 2011 19:41:43 +0900
Subject: ARM: SAMSUNG: Consolidate plat/pll.h

Removed
- arch/arm/plat-s3c24xx/include/plat/pll.h
- arch/arm/mach-s3c64xx/include/mach/pll.h
- arch/arm/plat-s5p/include/plat/pll.h
- arch/arm/plat-samsung/include/plat/pll6553x.h

And created
- arch/arm/plat-samsung/include/plat/pll.h

Cc: Ben Dooks <ben-linux@fluff.org>
[kgene.kim@samsung.com: changed title]
[kgene.kim@samsung.com: fixed conflicts in plat-s5p/include/pll.h]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c2410/mach-h1940.c            |   6 +-
 arch/arm/mach-s3c2416/clock.c                 |   1 -
 arch/arm/mach-s3c64xx/clock.c                 |   5 +-
 arch/arm/mach-s3c64xx/include/mach/pll.h      |  45 ----
 arch/arm/plat-s3c24xx/include/plat/pll.h      |  62 -----
 arch/arm/plat-s5p/include/plat/pll.h          | 152 ------------
 arch/arm/plat-samsung/include/plat/pll.h      | 323 ++++++++++++++++++++++++++
 arch/arm/plat-samsung/include/plat/pll6553x.h |  51 ----
 8 files changed, 329 insertions(+), 316 deletions(-)
 delete mode 100644 arch/arm/mach-s3c64xx/include/mach/pll.h
 delete mode 100644 arch/arm/plat-s3c24xx/include/plat/pll.h
 delete mode 100644 arch/arm/plat-s5p/include/plat/pll.h
 create mode 100644 arch/arm/plat-samsung/include/plat/pll.h
 delete mode 100644 arch/arm/plat-samsung/include/plat/pll6553x.h

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 2a2fa062013..a9201eaeb0f 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -696,9 +696,9 @@ static void __init h1940_init(void)
 			      S3C2410_MISCCR_USBSUSPND0 |
 			      S3C2410_MISCCR_USBSUSPND1, 0x0);
 
-	tmp =   (0x78 << S3C24XX_PLLCON_MDIVSHIFT)
-	      | (0x02 << S3C24XX_PLLCON_PDIVSHIFT)
-	      | (0x03 << S3C24XX_PLLCON_SDIVSHIFT);
+	tmp =   (0x78 << S3C24XX_PLL_MDIV_SHIFT)
+	      | (0x02 << S3C24XX_PLL_PDIV_SHIFT)
+	      | (0x03 << S3C24XX_PLL_SDIV_SHIFT);
 	writel(tmp, S3C2410_UPLLCON);
 
 	gpio_request(S3C2410_GPC(0), "LCD power");
diff --git a/arch/arm/mach-s3c2416/clock.c b/arch/arm/mach-s3c2416/clock.c
index 21a5e81f0ab..c7b91d09fef 100644
--- a/arch/arm/mach-s3c2416/clock.c
+++ b/arch/arm/mach-s3c2416/clock.c
@@ -21,7 +21,6 @@
 #include <plat/cpu.h>
 
 #include <plat/cpu-freq.h>
-#include <plat/pll6553x.h>
 #include <plat/pll.h>
 
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
index 8cf39e33579..4adc51ceb51 100644
--- a/arch/arm/mach-s3c64xx/clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -25,13 +25,13 @@
 
 #include <mach/regs-sys.h>
 #include <mach/regs-clock.h>
-#include <mach/pll.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/cpu-freq.h>
 #include <plat/clock.h>
 #include <plat/clock-clksrc.h>
+#include <plat/pll.h>
 
 /* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
  * ext_xtal_mux for want of an actual name from the manual.
@@ -735,7 +735,8 @@ void __init_or_cpufreq s3c6400_setup_clocks(void)
 	/* For now assume the mux always selects the crystal */
 	clk_ext_xtal_mux.parent = xtal_clk;
 
-	epll = s3c6400_get_epll(xtal);
+	epll = s3c_get_pll6553x(xtal, __raw_readl(S3C_EPLL_CON0),
+				__raw_readl(S3C_EPLL_CON1));
 	mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON));
 	apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON));
 
diff --git a/arch/arm/mach-s3c64xx/include/mach/pll.h b/arch/arm/mach-s3c64xx/include/mach/pll.h
deleted file mode 100644
index 5ef0bb698ee..00000000000
--- a/arch/arm/mach-s3c64xx/include/mach/pll.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* arch/arm/plat-s3c64xx/include/plat/pll.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX PLL code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C6400_PLL_MDIV_MASK	((1 << (25-16+1)) - 1)
-#define S3C6400_PLL_PDIV_MASK	((1 << (13-8+1)) - 1)
-#define S3C6400_PLL_SDIV_MASK	((1 << (2-0+1)) - 1)
-#define S3C6400_PLL_MDIV_SHIFT	(16)
-#define S3C6400_PLL_PDIV_SHIFT	(8)
-#define S3C6400_PLL_SDIV_SHIFT	(0)
-
-#include <asm/div64.h>
-#include <plat/pll6553x.h>
-
-static inline unsigned long s3c6400_get_pll(unsigned long baseclk,
-					    u32 pllcon)
-{
-	u32 mdiv, pdiv, sdiv;
-	u64 fvco = baseclk;
-
-	mdiv = (pllcon >> S3C6400_PLL_MDIV_SHIFT) & S3C6400_PLL_MDIV_MASK;
-	pdiv = (pllcon >> S3C6400_PLL_PDIV_SHIFT) & S3C6400_PLL_PDIV_MASK;
-	sdiv = (pllcon >> S3C6400_PLL_SDIV_SHIFT) & S3C6400_PLL_SDIV_MASK;
-
-	fvco *= mdiv;
-	do_div(fvco, (pdiv << sdiv));
-
-	return (unsigned long)fvco;
-}
-
-static inline unsigned long s3c6400_get_epll(unsigned long baseclk)
-{
-	return s3c_get_pll6553x(baseclk, __raw_readl(S3C_EPLL_CON0),
-				__raw_readl(S3C_EPLL_CON1));
-}
diff --git a/arch/arm/plat-s3c24xx/include/plat/pll.h b/arch/arm/plat-s3c24xx/include/plat/pll.h
deleted file mode 100644
index 005729a1077..00000000000
--- a/arch/arm/plat-s3c24xx/include/plat/pll.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/include/plat/pll.h
- *
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C24xx - common pll registers and code
- */
-
-#define S3C24XX_PLLCON_MDIVSHIFT	12
-#define S3C24XX_PLLCON_PDIVSHIFT	4
-#define S3C24XX_PLLCON_SDIVSHIFT	0
-#define S3C24XX_PLLCON_MDIVMASK		((1<<(1+(19-12)))-1)
-#define S3C24XX_PLLCON_PDIVMASK		((1<<5)-1)
-#define S3C24XX_PLLCON_SDIVMASK		3
-
-#include <asm/div64.h>
-
-static inline unsigned int
-s3c24xx_get_pll(unsigned int pllval, unsigned int baseclk)
-{
-	unsigned int mdiv, pdiv, sdiv;
-	uint64_t fvco;
-
-	mdiv = pllval >> S3C24XX_PLLCON_MDIVSHIFT;
-	pdiv = pllval >> S3C24XX_PLLCON_PDIVSHIFT;
-	sdiv = pllval >> S3C24XX_PLLCON_SDIVSHIFT;
-
-	mdiv &= S3C24XX_PLLCON_MDIVMASK;
-	pdiv &= S3C24XX_PLLCON_PDIVMASK;
-	sdiv &= S3C24XX_PLLCON_SDIVMASK;
-
-	fvco = (uint64_t)baseclk * (mdiv + 8);
-	do_div(fvco, (pdiv + 2) << sdiv);
-
-	return (unsigned int)fvco;
-}
-
-#define S3C2416_PLL_M_SHIFT	(14)
-#define S3C2416_PLL_P_SHIFT	(5)
-#define S3C2416_PLL_S_MASK	(7)
-#define S3C2416_PLL_M_MASK	((1 << 10) - 1)
-#define S3C2416_PLL_P_MASK	(63)
-
-static inline unsigned int
-s3c2416_get_pll(unsigned int pllval, unsigned int baseclk)
-{
-	unsigned int m, p, s;
-	uint64_t fvco;
-
-	m = pllval >> S3C2416_PLL_M_SHIFT;
-	p = pllval >> S3C2416_PLL_P_SHIFT;
-
-	s = pllval & S3C2416_PLL_S_MASK;
-	m &= S3C2416_PLL_M_MASK;
-	p &= S3C2416_PLL_P_MASK;
-
-	fvco = (uint64_t)baseclk * m;
-	do_div(fvco, (p << s));
-
-	return (unsigned int)fvco;
-}
diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-s5p/include/plat/pll.h
deleted file mode 100644
index ebc142c5c84..00000000000
--- a/arch/arm/plat-s5p/include/plat/pll.h
+++ /dev/null
@@ -1,152 +0,0 @@
-/* arch/arm/plat-s5p/include/plat/pll.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P PLL code
- *
- * Based on arch/arm/plat-s3c64xx/include/plat/pll.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define PLL45XX_MDIV_MASK	(0x3FF)
-#define PLL45XX_PDIV_MASK	(0x3F)
-#define PLL45XX_SDIV_MASK	(0x7)
-#define PLL45XX_MDIV_SHIFT	(16)
-#define PLL45XX_PDIV_SHIFT	(8)
-#define PLL45XX_SDIV_SHIFT	(0)
-
-#include <asm/div64.h>
-
-enum pll45xx_type_t {
-	pll_4500,
-	pll_4502,
-	pll_4508
-};
-
-static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con,
-					    enum pll45xx_type_t pll_type)
-{
-	u32 mdiv, pdiv, sdiv;
-	u64 fvco = baseclk;
-
-	mdiv = (pll_con >> PLL45XX_MDIV_SHIFT) & PLL45XX_MDIV_MASK;
-	pdiv = (pll_con >> PLL45XX_PDIV_SHIFT) & PLL45XX_PDIV_MASK;
-	sdiv = (pll_con >> PLL45XX_SDIV_SHIFT) & PLL45XX_SDIV_MASK;
-
-	if (pll_type == pll_4508)
-		sdiv = sdiv - 1;
-
-	fvco *= mdiv;
-	do_div(fvco, (pdiv << sdiv));
-
-	return (unsigned long)fvco;
-}
-
-#define PLL46XX_KDIV_MASK	(0xFFFF)
-#define PLL4650C_KDIV_MASK	(0xFFF)
-#define PLL46XX_MDIV_MASK	(0x1FF)
-#define PLL46XX_PDIV_MASK	(0x3F)
-#define PLL46XX_SDIV_MASK	(0x7)
-#define PLL46XX_MDIV_SHIFT	(16)
-#define PLL46XX_PDIV_SHIFT	(8)
-#define PLL46XX_SDIV_SHIFT	(0)
-
-enum pll46xx_type_t {
-	pll_4600,
-	pll_4650,
-	pll_4650c,
-};
-
-static inline unsigned long s5p_get_pll46xx(unsigned long baseclk,
-					    u32 pll_con0, u32 pll_con1,
-					    enum pll46xx_type_t pll_type)
-{
-	unsigned long result;
-	u32 mdiv, pdiv, sdiv, kdiv;
-	u64 tmp;
-
-	mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK;
-	pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK;
-	sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK;
-
-	if (pll_type == pll_4650c)
-		kdiv = pll_con1 & PLL4650C_KDIV_MASK;
-	else
-		kdiv = pll_con1 & PLL46XX_KDIV_MASK;
-
-	tmp = baseclk;
-
-	if (pll_type == pll_4600) {
-		tmp *= (mdiv << 16) + kdiv;
-		do_div(tmp, (pdiv << sdiv));
-		result = tmp >> 16;
-	} else {
-		tmp *= (mdiv << 10) + kdiv;
-		do_div(tmp, (pdiv << sdiv));
-		result = tmp >> 10;
-	}
-
-	return result;
-}
-
-#define PLL90XX_MDIV_MASK	(0xFF)
-#define PLL90XX_PDIV_MASK	(0x3F)
-#define PLL90XX_SDIV_MASK	(0x7)
-#define PLL90XX_KDIV_MASK	(0xffff)
-#define PLL90XX_MDIV_SHIFT	(16)
-#define PLL90XX_PDIV_SHIFT	(8)
-#define PLL90XX_SDIV_SHIFT	(0)
-#define PLL90XX_KDIV_SHIFT	(0)
-
-static inline unsigned long s5p_get_pll90xx(unsigned long baseclk,
-					    u32 pll_con, u32 pll_conk)
-{
-	unsigned long result;
-	u32 mdiv, pdiv, sdiv, kdiv;
-	u64 tmp;
-
-	mdiv = (pll_con >> PLL90XX_MDIV_SHIFT) & PLL90XX_MDIV_MASK;
-	pdiv = (pll_con >> PLL90XX_PDIV_SHIFT) & PLL90XX_PDIV_MASK;
-	sdiv = (pll_con >> PLL90XX_SDIV_SHIFT) & PLL90XX_SDIV_MASK;
-	kdiv = pll_conk & PLL90XX_KDIV_MASK;
-
-	/* We need to multiple baseclk by mdiv (the integer part) and kdiv
-	 * which is in 2^16ths, so shift mdiv up (does not overflow) and
-	 * add kdiv before multiplying. The use of tmp is to avoid any
-	 * overflows before shifting bac down into result when multipling
-	 * by the mdiv and kdiv pair.
-	 */
-
-	tmp = baseclk;
-	tmp *= (mdiv << 16) + kdiv;
-	do_div(tmp, (pdiv << sdiv));
-	result = tmp >> 16;
-
-	return result;
-}
-
-#define PLL65XX_MDIV_MASK	(0x3FF)
-#define PLL65XX_PDIV_MASK	(0x3F)
-#define PLL65XX_SDIV_MASK	(0x7)
-#define PLL65XX_MDIV_SHIFT	(16)
-#define PLL65XX_PDIV_SHIFT	(8)
-#define PLL65XX_SDIV_SHIFT	(0)
-
-static inline unsigned long s5p_get_pll65xx(unsigned long baseclk, u32 pll_con)
-{
-	u32 mdiv, pdiv, sdiv;
-	u64 fvco = baseclk;
-
-	mdiv = (pll_con >> PLL65XX_MDIV_SHIFT) & PLL65XX_MDIV_MASK;
-	pdiv = (pll_con >> PLL65XX_PDIV_SHIFT) & PLL65XX_PDIV_MASK;
-	sdiv = (pll_con >> PLL65XX_SDIV_SHIFT) & PLL65XX_SDIV_MASK;
-
-	fvco *= mdiv;
-	do_div(fvco, (pdiv << sdiv));
-
-	return (unsigned long)fvco;
-}
diff --git a/arch/arm/plat-samsung/include/plat/pll.h b/arch/arm/plat-samsung/include/plat/pll.h
new file mode 100644
index 00000000000..357af7c1c66
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/pll.h
@@ -0,0 +1,323 @@
+/* linux/arch/arm/plat-samsung/include/plat/pll.h
+ *
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Samsung PLL codes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <asm/div64.h>
+
+#define S3C24XX_PLL_MDIV_MASK		(0xFF)
+#define S3C24XX_PLL_PDIV_MASK		(0x1F)
+#define S3C24XX_PLL_SDIV_MASK		(0x3)
+#define S3C24XX_PLL_MDIV_SHIFT		(12)
+#define S3C24XX_PLL_PDIV_SHIFT		(4)
+#define S3C24XX_PLL_SDIV_SHIFT		(0)
+
+static inline unsigned int s3c24xx_get_pll(unsigned int pllval,
+					   unsigned int baseclk)
+{
+	unsigned int mdiv, pdiv, sdiv;
+	uint64_t fvco;
+
+	mdiv = (pllval >> S3C24XX_PLL_MDIV_SHIFT) & S3C24XX_PLL_MDIV_MASK;
+	pdiv = (pllval >> S3C24XX_PLL_PDIV_SHIFT) & S3C24XX_PLL_PDIV_MASK;
+	sdiv = (pllval >> S3C24XX_PLL_SDIV_SHIFT) & S3C24XX_PLL_SDIV_MASK;
+
+	fvco = (uint64_t)baseclk * (mdiv + 8);
+	do_div(fvco, (pdiv + 2) << sdiv);
+
+	return (unsigned int)fvco;
+}
+
+#define S3C2416_PLL_MDIV_MASK		(0x3FF)
+#define S3C2416_PLL_PDIV_MASK		(0x3F)
+#define S3C2416_PLL_SDIV_MASK		(0x7)
+#define S3C2416_PLL_MDIV_SHIFT		(14)
+#define S3C2416_PLL_PDIV_SHIFT		(5)
+#define S3C2416_PLL_SDIV_SHIFT		(0)
+
+static inline unsigned int s3c2416_get_pll(unsigned int pllval,
+					   unsigned int baseclk)
+{
+	unsigned int mdiv, pdiv, sdiv;
+	uint64_t fvco;
+
+	mdiv = (pllval >> S3C2416_PLL_MDIV_SHIFT) & S3C2416_PLL_MDIV_MASK;
+	pdiv = (pllval >> S3C2416_PLL_PDIV_SHIFT) & S3C2416_PLL_PDIV_MASK;
+	sdiv = (pllval >> S3C2416_PLL_SDIV_SHIFT) & S3C2416_PLL_SDIV_MASK;
+
+	fvco = (uint64_t)baseclk * mdiv;
+	do_div(fvco, (pdiv << sdiv));
+
+	return (unsigned int)fvco;
+}
+
+#define S3C6400_PLL_MDIV_MASK		(0x3FF)
+#define S3C6400_PLL_PDIV_MASK		(0x3F)
+#define S3C6400_PLL_SDIV_MASK		(0x7)
+#define S3C6400_PLL_MDIV_SHIFT		(16)
+#define S3C6400_PLL_PDIV_SHIFT		(8)
+#define S3C6400_PLL_SDIV_SHIFT		(0)
+
+static inline unsigned long s3c6400_get_pll(unsigned long baseclk,
+					    u32 pllcon)
+{
+	u32 mdiv, pdiv, sdiv;
+	u64 fvco = baseclk;
+
+	mdiv = (pllcon >> S3C6400_PLL_MDIV_SHIFT) & S3C6400_PLL_MDIV_MASK;
+	pdiv = (pllcon >> S3C6400_PLL_PDIV_SHIFT) & S3C6400_PLL_PDIV_MASK;
+	sdiv = (pllcon >> S3C6400_PLL_SDIV_SHIFT) & S3C6400_PLL_SDIV_MASK;
+
+	fvco *= mdiv;
+	do_div(fvco, (pdiv << sdiv));
+
+	return (unsigned long)fvco;
+}
+
+#define PLL6553X_MDIV_MASK	(0x7F)
+#define PLL6553X_PDIV_MASK	(0x1F)
+#define PLL6553X_SDIV_MASK	(0x3)
+#define PLL6553X_KDIV_MASK	(0xFFFF)
+#define PLL6553X_MDIV_SHIFT	(16)
+#define PLL6553X_PDIV_SHIFT	(8)
+#define PLL6553X_SDIV_SHIFT	(0)
+
+static inline unsigned long s3c_get_pll6553x(unsigned long baseclk,
+					     u32 pll_con0, u32 pll_con1)
+{
+	unsigned long result;
+	u32 mdiv, pdiv, sdiv, kdiv;
+	u64 tmp;
+
+	mdiv = (pll_con0 >> PLL6553X_MDIV_SHIFT) & PLL6553X_MDIV_MASK;
+	pdiv = (pll_con0 >> PLL6553X_PDIV_SHIFT) & PLL6553X_PDIV_MASK;
+	sdiv = (pll_con0 >> PLL6553X_SDIV_SHIFT) & PLL6553X_SDIV_MASK;
+	kdiv = pll_con1 & PLL6553X_KDIV_MASK;
+
+	/*
+	 * We need to multiple baseclk by mdiv (the integer part) and kdiv
+	 * which is in 2^16ths, so shift mdiv up (does not overflow) and
+	 * add kdiv before multiplying. The use of tmp is to avoid any
+	 * overflows before shifting bac down into result when multipling
+	 * by the mdiv and kdiv pair.
+	 */
+
+	tmp = baseclk;
+	tmp *= (mdiv << 16) + kdiv;
+	do_div(tmp, (pdiv << sdiv));
+	result = tmp >> 16;
+
+	return result;
+}
+
+#define PLL35XX_MDIV_MASK	(0x3FF)
+#define PLL35XX_PDIV_MASK	(0x3F)
+#define PLL35XX_SDIV_MASK	(0x7)
+#define PLL35XX_MDIV_SHIFT	(16)
+#define PLL35XX_PDIV_SHIFT	(8)
+#define PLL35XX_SDIV_SHIFT	(0)
+
+static inline unsigned long s5p_get_pll35xx(unsigned long baseclk, u32 pll_con)
+{
+	u32 mdiv, pdiv, sdiv;
+	u64 fvco = baseclk;
+
+	mdiv = (pll_con >> PLL35XX_MDIV_SHIFT) & PLL35XX_MDIV_MASK;
+	pdiv = (pll_con >> PLL35XX_PDIV_SHIFT) & PLL35XX_PDIV_MASK;
+	sdiv = (pll_con >> PLL35XX_SDIV_SHIFT) & PLL35XX_SDIV_MASK;
+
+	fvco *= mdiv;
+	do_div(fvco, (pdiv << sdiv));
+
+	return (unsigned long)fvco;
+}
+
+#define PLL36XX_KDIV_MASK	(0xFFFF)
+#define PLL36XX_MDIV_MASK	(0x1FF)
+#define PLL36XX_PDIV_MASK	(0x3F)
+#define PLL36XX_SDIV_MASK	(0x7)
+#define PLL36XX_MDIV_SHIFT	(16)
+#define PLL36XX_PDIV_SHIFT	(8)
+#define PLL36XX_SDIV_SHIFT	(0)
+
+static inline unsigned long s5p_get_pll36xx(unsigned long baseclk,
+					    u32 pll_con0, u32 pll_con1)
+{
+	unsigned long result;
+	u32 mdiv, pdiv, sdiv, kdiv;
+	u64 tmp;
+
+	mdiv = (pll_con0 >> PLL36XX_MDIV_SHIFT) & PLL36XX_MDIV_MASK;
+	pdiv = (pll_con0 >> PLL36XX_PDIV_SHIFT) & PLL36XX_PDIV_MASK;
+	sdiv = (pll_con0 >> PLL36XX_SDIV_SHIFT) & PLL36XX_SDIV_MASK;
+	kdiv = pll_con1 & PLL36XX_KDIV_MASK;
+
+	tmp = baseclk;
+
+	tmp *= (mdiv << 16) + kdiv;
+	do_div(tmp, (pdiv << sdiv));
+	result = tmp >> 16;
+
+	return result;
+}
+
+#define PLL45XX_MDIV_MASK	(0x3FF)
+#define PLL45XX_PDIV_MASK	(0x3F)
+#define PLL45XX_SDIV_MASK	(0x7)
+#define PLL45XX_MDIV_SHIFT	(16)
+#define PLL45XX_PDIV_SHIFT	(8)
+#define PLL45XX_SDIV_SHIFT	(0)
+
+enum pll45xx_type_t {
+	pll_4500,
+	pll_4502,
+	pll_4508
+};
+
+static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con,
+					    enum pll45xx_type_t pll_type)
+{
+	u32 mdiv, pdiv, sdiv;
+	u64 fvco = baseclk;
+
+	mdiv = (pll_con >> PLL45XX_MDIV_SHIFT) & PLL45XX_MDIV_MASK;
+	pdiv = (pll_con >> PLL45XX_PDIV_SHIFT) & PLL45XX_PDIV_MASK;
+	sdiv = (pll_con >> PLL45XX_SDIV_SHIFT) & PLL45XX_SDIV_MASK;
+
+	if (pll_type == pll_4508)
+		sdiv = sdiv - 1;
+
+	fvco *= mdiv;
+	do_div(fvco, (pdiv << sdiv));
+
+	return (unsigned long)fvco;
+}
+
+/* CON0 bit-fields */
+#define PLL46XX_MDIV_MASK	(0x1FF)
+#define PLL46XX_PDIV_MASK	(0x3F)
+#define PLL46XX_SDIV_MASK	(0x7)
+#define PLL46XX_LOCKED_SHIFT	(29)
+#define PLL46XX_MDIV_SHIFT	(16)
+#define PLL46XX_PDIV_SHIFT	(8)
+#define PLL46XX_SDIV_SHIFT	(0)
+
+/* CON1 bit-fields */
+#define PLL46XX_MRR_MASK	(0x1F)
+#define PLL46XX_MFR_MASK	(0x3F)
+#define PLL46XX_KDIV_MASK	(0xFFFF)
+#define PLL4650C_KDIV_MASK	(0xFFF)
+#define PLL46XX_MRR_SHIFT	(24)
+#define PLL46XX_MFR_SHIFT	(16)
+#define PLL46XX_KDIV_SHIFT	(0)
+
+enum pll46xx_type_t {
+	pll_4600,
+	pll_4650,
+	pll_4650c,
+};
+
+static inline unsigned long s5p_get_pll46xx(unsigned long baseclk,
+					    u32 pll_con0, u32 pll_con1,
+					    enum pll46xx_type_t pll_type)
+{
+	unsigned long result;
+	u32 mdiv, pdiv, sdiv, kdiv;
+	u64 tmp;
+
+	mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK;
+	pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK;
+	sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK;
+	kdiv = pll_con1 & PLL46XX_KDIV_MASK;
+
+	if (pll_type == pll_4650c)
+		kdiv = pll_con1 & PLL4650C_KDIV_MASK;
+	else
+		kdiv = pll_con1 & PLL46XX_KDIV_MASK;
+
+	tmp = baseclk;
+
+	if (pll_type == pll_4600) {
+		tmp *= (mdiv << 16) + kdiv;
+		do_div(tmp, (pdiv << sdiv));
+		result = tmp >> 16;
+	} else {
+		tmp *= (mdiv << 10) + kdiv;
+		do_div(tmp, (pdiv << sdiv));
+		result = tmp >> 10;
+	}
+
+	return result;
+}
+
+#define PLL90XX_MDIV_MASK	(0xFF)
+#define PLL90XX_PDIV_MASK	(0x3F)
+#define PLL90XX_SDIV_MASK	(0x7)
+#define PLL90XX_KDIV_MASK	(0xffff)
+#define PLL90XX_LOCKED_SHIFT	(29)
+#define PLL90XX_MDIV_SHIFT	(16)
+#define PLL90XX_PDIV_SHIFT	(8)
+#define PLL90XX_SDIV_SHIFT	(0)
+#define PLL90XX_KDIV_SHIFT	(0)
+
+static inline unsigned long s5p_get_pll90xx(unsigned long baseclk,
+					    u32 pll_con, u32 pll_conk)
+{
+	unsigned long result;
+	u32 mdiv, pdiv, sdiv, kdiv;
+	u64 tmp;
+
+	mdiv = (pll_con >> PLL90XX_MDIV_SHIFT) & PLL90XX_MDIV_MASK;
+	pdiv = (pll_con >> PLL90XX_PDIV_SHIFT) & PLL90XX_PDIV_MASK;
+	sdiv = (pll_con >> PLL90XX_SDIV_SHIFT) & PLL90XX_SDIV_MASK;
+	kdiv = pll_conk & PLL90XX_KDIV_MASK;
+
+	/*
+	 * We need to multiple baseclk by mdiv (the integer part) and kdiv
+	 * which is in 2^16ths, so shift mdiv up (does not overflow) and
+	 * add kdiv before multiplying. The use of tmp is to avoid any
+	 * overflows before shifting bac down into result when multipling
+	 * by the mdiv and kdiv pair.
+	 */
+
+	tmp = baseclk;
+	tmp *= (mdiv << 16) + kdiv;
+	do_div(tmp, (pdiv << sdiv));
+	result = tmp >> 16;
+
+	return result;
+}
+
+#define PLL65XX_MDIV_MASK	(0x3FF)
+#define PLL65XX_PDIV_MASK	(0x3F)
+#define PLL65XX_SDIV_MASK	(0x7)
+#define PLL65XX_MDIV_SHIFT	(16)
+#define PLL65XX_PDIV_SHIFT	(8)
+#define PLL65XX_SDIV_SHIFT	(0)
+
+static inline unsigned long s5p_get_pll65xx(unsigned long baseclk, u32 pll_con)
+{
+	u32 mdiv, pdiv, sdiv;
+	u64 fvco = baseclk;
+
+	mdiv = (pll_con >> PLL65XX_MDIV_SHIFT) & PLL65XX_MDIV_MASK;
+	pdiv = (pll_con >> PLL65XX_PDIV_SHIFT) & PLL65XX_PDIV_MASK;
+	sdiv = (pll_con >> PLL65XX_SDIV_SHIFT) & PLL65XX_SDIV_MASK;
+
+	fvco *= mdiv;
+	do_div(fvco, (pdiv << sdiv));
+
+	return (unsigned long)fvco;
+}
diff --git a/arch/arm/plat-samsung/include/plat/pll6553x.h b/arch/arm/plat-samsung/include/plat/pll6553x.h
deleted file mode 100644
index b8b7e1d884f..00000000000
--- a/arch/arm/plat-samsung/include/plat/pll6553x.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/pll6553x.h
- *	partially from arch/arm/mach-s3c64xx/include/mach/pll.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * Samsung PLL6553x PLL code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* S3C6400 and compatible (S3C2416, etc.) EPLL code */
-
-#define PLL6553X_MDIV_MASK	((1 << (23-16)) - 1)
-#define PLL6553X_PDIV_MASK	((1 << (13-8)) - 1)
-#define PLL6553X_SDIV_MASK	((1 << (2-0)) - 1)
-#define PLL6553X_MDIV_SHIFT	(16)
-#define PLL6553X_PDIV_SHIFT	(8)
-#define PLL6553X_SDIV_SHIFT	(0)
-#define PLL6553X_KDIV_MASK	(0xffff)
-
-static inline unsigned long s3c_get_pll6553x(unsigned long baseclk,
-					     u32 pll0, u32 pll1)
-{
-	unsigned long result;
-	u32 mdiv, pdiv, sdiv, kdiv;
-	u64 tmp;
-
-	mdiv = (pll0 >> PLL6553X_MDIV_SHIFT) & PLL6553X_MDIV_MASK;
-	pdiv = (pll0 >> PLL6553X_PDIV_SHIFT) & PLL6553X_PDIV_MASK;
-	sdiv = (pll0 >> PLL6553X_SDIV_SHIFT) & PLL6553X_SDIV_MASK;
-	kdiv = pll1 & PLL6553X_KDIV_MASK;
-
-	/* We need to multiple baseclk by mdiv (the integer part) and kdiv
-	 * which is in 2^16ths, so shift mdiv up (does not overflow) and
-	 * add kdiv before multiplying. The use of tmp is to avoid any
-	 * overflows before shifting bac down into result when multipling
-	 * by the mdiv and kdiv pair.
-	 */
-
-	tmp = baseclk;
-	tmp *= (mdiv << 16) + kdiv;
-	do_div(tmp, (pdiv << sdiv));
-	result = tmp >> 16;
-
-	return result;
-}
-- 
cgit v1.2.3-18-g5258


From 3cd7b62bbd54c9c59e7c8c5815cca9ded21a0a80 Mon Sep 17 00:00:00 2001
From: Kukjin Kim <kgene.kim@samsung.com>
Date: Sat, 10 Sep 2011 10:09:21 +0900
Subject: ARM: SAMSUNG: Moving each SoC support header files

This patch moves SoC header files for supporting each SoCs to
plat-samsung directory. This is required to make one plat-
directory for Samsung SoCs.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c64xx/cpu.c                  |  4 +--
 arch/arm/mach-s3c64xx/include/mach/s3c6400.h | 36 --------------------
 arch/arm/mach-s3c64xx/include/mach/s3c6410.h | 29 ----------------
 arch/arm/mach-s3c64xx/mach-anw6410.c         |  2 +-
 arch/arm/mach-s3c64xx/mach-crag6410.c        |  2 +-
 arch/arm/mach-s3c64xx/mach-hmt.c             |  2 +-
 arch/arm/mach-s3c64xx/mach-mini6410.c        |  2 +-
 arch/arm/mach-s3c64xx/mach-ncp.c             |  2 +-
 arch/arm/mach-s3c64xx/mach-real6410.c        |  2 +-
 arch/arm/mach-s3c64xx/mach-smartq5.c         |  2 +-
 arch/arm/mach-s3c64xx/mach-smartq7.c         |  2 +-
 arch/arm/mach-s3c64xx/mach-smdk6400.c        |  2 +-
 arch/arm/mach-s3c64xx/mach-smdk6410.c        |  2 +-
 arch/arm/mach-s3c64xx/s3c6400.c              |  2 +-
 arch/arm/mach-s3c64xx/s3c6410.c              |  4 +--
 arch/arm/plat-s3c24xx/include/plat/s3c2410.h | 33 ------------------
 arch/arm/plat-s3c24xx/include/plat/s3c2412.h | 29 ----------------
 arch/arm/plat-s3c24xx/include/plat/s3c2416.h | 31 -----------------
 arch/arm/plat-s3c24xx/include/plat/s3c2443.h | 51 ----------------------------
 arch/arm/plat-s3c24xx/include/plat/s3c244x.h | 42 -----------------------
 arch/arm/plat-s5p/include/plat/exynos4.h     | 34 -------------------
 arch/arm/plat-s5p/include/plat/s5p6440.h     | 36 --------------------
 arch/arm/plat-s5p/include/plat/s5p6450.h     | 36 --------------------
 arch/arm/plat-s5p/include/plat/s5pc100.h     | 33 ------------------
 arch/arm/plat-s5p/include/plat/s5pv210.h     | 33 ------------------
 arch/arm/plat-samsung/include/plat/exynos4.h | 34 +++++++++++++++++++
 arch/arm/plat-samsung/include/plat/s3c2410.h | 33 ++++++++++++++++++
 arch/arm/plat-samsung/include/plat/s3c2412.h | 29 ++++++++++++++++
 arch/arm/plat-samsung/include/plat/s3c2416.h | 31 +++++++++++++++++
 arch/arm/plat-samsung/include/plat/s3c2443.h | 51 ++++++++++++++++++++++++++++
 arch/arm/plat-samsung/include/plat/s3c244x.h | 42 +++++++++++++++++++++++
 arch/arm/plat-samsung/include/plat/s3c6400.h | 36 ++++++++++++++++++++
 arch/arm/plat-samsung/include/plat/s3c6410.h | 29 ++++++++++++++++
 arch/arm/plat-samsung/include/plat/s5p6440.h | 36 ++++++++++++++++++++
 arch/arm/plat-samsung/include/plat/s5p6450.h | 36 ++++++++++++++++++++
 arch/arm/plat-samsung/include/plat/s5pc100.h | 33 ++++++++++++++++++
 arch/arm/plat-samsung/include/plat/s5pv210.h | 33 ++++++++++++++++++
 37 files changed, 438 insertions(+), 438 deletions(-)
 delete mode 100644 arch/arm/mach-s3c64xx/include/mach/s3c6400.h
 delete mode 100644 arch/arm/mach-s3c64xx/include/mach/s3c6410.h
 delete mode 100644 arch/arm/plat-s3c24xx/include/plat/s3c2410.h
 delete mode 100644 arch/arm/plat-s3c24xx/include/plat/s3c2412.h
 delete mode 100644 arch/arm/plat-s3c24xx/include/plat/s3c2416.h
 delete mode 100644 arch/arm/plat-s3c24xx/include/plat/s3c2443.h
 delete mode 100644 arch/arm/plat-s3c24xx/include/plat/s3c244x.h
 delete mode 100644 arch/arm/plat-s5p/include/plat/exynos4.h
 delete mode 100644 arch/arm/plat-s5p/include/plat/s5p6440.h
 delete mode 100644 arch/arm/plat-s5p/include/plat/s5p6450.h
 delete mode 100644 arch/arm/plat-s5p/include/plat/s5pc100.h
 delete mode 100644 arch/arm/plat-s5p/include/plat/s5pv210.h
 create mode 100644 arch/arm/plat-samsung/include/plat/exynos4.h
 create mode 100644 arch/arm/plat-samsung/include/plat/s3c2410.h
 create mode 100644 arch/arm/plat-samsung/include/plat/s3c2412.h
 create mode 100644 arch/arm/plat-samsung/include/plat/s3c2416.h
 create mode 100644 arch/arm/plat-samsung/include/plat/s3c2443.h
 create mode 100644 arch/arm/plat-samsung/include/plat/s3c244x.h
 create mode 100644 arch/arm/plat-samsung/include/plat/s3c6400.h
 create mode 100644 arch/arm/plat-samsung/include/plat/s3c6410.h
 create mode 100644 arch/arm/plat-samsung/include/plat/s5p6440.h
 create mode 100644 arch/arm/plat-samsung/include/plat/s5p6450.h
 create mode 100644 arch/arm/plat-samsung/include/plat/s5pc100.h
 create mode 100644 arch/arm/plat-samsung/include/plat/s5pv210.h

(limited to 'arch')

diff --git a/arch/arm/mach-s3c64xx/cpu.c b/arch/arm/mach-s3c64xx/cpu.c
index 374e45e566b..f06f33c48b8 100644
--- a/arch/arm/mach-s3c64xx/cpu.c
+++ b/arch/arm/mach-s3c64xx/cpu.c
@@ -33,8 +33,8 @@
 #include <plat/devs.h>
 #include <plat/clock.h>
 
-#include <mach/s3c6400.h>
-#include <mach/s3c6410.h>
+#include <plat/s3c6400.h>
+#include <plat/s3c6410.h>
 
 /* table of supported CPUs */
 
diff --git a/arch/arm/mach-s3c64xx/include/mach/s3c6400.h b/arch/arm/mach-s3c64xx/include/mach/s3c6400.h
deleted file mode 100644
index f86958d0535..00000000000
--- a/arch/arm/mach-s3c64xx/include/mach/s3c6400.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* arch/arm/mach-s3c64xx/include/macht/s3c6400.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * Header file for s3c6400 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for S3C6400 related SoCs */
-
-extern void s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c6400_setup_clocks(void);
-
-extern void s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_limit);
-
-#ifdef CONFIG_CPU_S3C6400
-
-extern  int s3c6400_init(void);
-extern void s3c6400_init_irq(void);
-extern void s3c6400_map_io(void);
-extern void s3c6400_init_clocks(int xtal);
-
-#define s3c6400_init_uarts s3c6400_common_init_uarts
-
-#else
-#define s3c6400_init_clocks NULL
-#define s3c6400_init_uarts NULL
-#define s3c6400_map_io NULL
-#define s3c6400_init NULL
-#endif
diff --git a/arch/arm/mach-s3c64xx/include/mach/s3c6410.h b/arch/arm/mach-s3c64xx/include/mach/s3c6410.h
deleted file mode 100644
index 24f1141ffcb..00000000000
--- a/arch/arm/mach-s3c64xx/include/mach/s3c6410.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* arch/arm/mach-s3c64xx/include/mach/s3c6410.h
- *
- * Copyright 2008 Openmoko,  Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * Header file for s3c6410 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C6410
-
-extern  int s3c6410_init(void);
-extern void s3c6410_init_irq(void);
-extern void s3c6410_map_io(void);
-extern void s3c6410_init_clocks(int xtal);
-
-#define s3c6410_init_uarts s3c6400_common_init_uarts
-
-#else
-#define s3c6410_init_clocks NULL
-#define s3c6410_init_uarts NULL
-#define s3c6410_map_io NULL
-#define s3c6410_init NULL
-#endif
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index cb8864327ac..d2a68d22eda 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -45,7 +45,7 @@
 #include <plat/fb.h>
 #include <plat/regs-fb-v4.h>
 
-#include <mach/s3c6410.h>
+#include <plat/s3c6410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index f32ec68002e..c483c983b95 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -43,13 +43,13 @@
 #include <mach/hardware.h>
 #include <mach/map.h>
 
-#include <mach/s3c6410.h>
 #include <mach/regs-sys.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-modem.h>
 
 #include <mach/regs-gpio-memport.h>
 
+#include <plat/s3c6410.h>
 #include <plat/regs-serial.h>
 #include <plat/regs-fb-v4.h>
 #include <plat/fb.h>
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index b3d93cc8dde..61f4fde088e 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -37,7 +37,7 @@
 #include <plat/fb.h>
 #include <plat/nand.h>
 
-#include <mach/s3c6410.h>
+#include <plat/s3c6410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 8f34a3c1049..5abb6d44252 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -32,8 +32,8 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-modem.h>
 #include <mach/regs-srom.h>
-#include <mach/s3c6410.h>
 
+#include <plat/s3c6410.h>
 #include <plat/adc.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index 01c6857c5b6..0f4316a2dc0 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -39,7 +39,7 @@
 #include <plat/iic.h>
 #include <plat/fb.h>
 
-#include <mach/s3c6410.h>
+#include <plat/s3c6410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 1f5abfae4ea..1073d8105ba 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -33,8 +33,8 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-modem.h>
 #include <mach/regs-srom.h>
-#include <mach/s3c6410.h>
 
+#include <plat/s3c6410.h>
 #include <plat/adc.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c
index 342e8dfddf8..30e906b842e 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq5.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq5.c
@@ -22,8 +22,8 @@
 
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
-#include <mach/s3c6410.h>
 
+#include <plat/s3c6410.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/fb.h>
diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c
index 57963977da8..9a71c2bf610 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq7.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq7.c
@@ -22,8 +22,8 @@
 
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
-#include <mach/s3c6410.h>
 
+#include <plat/s3c6410.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/fb.h>
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index 3cca642f1e6..fc7cb03e188 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -31,7 +31,7 @@
 
 #include <plat/regs-serial.h>
 
-#include <mach/s3c6400.h>
+#include <plat/s3c6400.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index c5190a50f0d..51957a11351 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -63,7 +63,7 @@
 #include <plat/fb.h>
 #include <plat/gpio-cfg.h>
 
-#include <mach/s3c6410.h>
+#include <plat/s3c6410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c
index 5e93fe3f3f4..7a3bc32df42 100644
--- a/arch/arm/mach-s3c64xx/s3c6400.c
+++ b/arch/arm/mach-s3c64xx/s3c6400.c
@@ -38,7 +38,7 @@
 #include <plat/sdhci.h>
 #include <plat/iic-core.h>
 #include <plat/onenand-core.h>
-#include <mach/s3c6400.h>
+#include <plat/s3c6400.h>
 
 void __init s3c6400_map_io(void)
 {
diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c
index 312aa6b115e..4117003464a 100644
--- a/arch/arm/mach-s3c64xx/s3c6410.c
+++ b/arch/arm/mach-s3c64xx/s3c6410.c
@@ -41,8 +41,8 @@
 #include <plat/adc-core.h>
 #include <plat/iic-core.h>
 #include <plat/onenand-core.h>
-#include <mach/s3c6400.h>
-#include <mach/s3c6410.h>
+#include <plat/s3c6400.h>
+#include <plat/s3c6410.h>
 
 void __init s3c6410_map_io(void)
 {
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
deleted file mode 100644
index 82ab4aad1bb..00000000000
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/s3c2410.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2410 machine directory
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#ifdef CONFIG_CPU_S3C2410
-
-extern  int s3c2410_init(void);
-extern  int s3c2410a_init(void);
-
-extern void s3c2410_map_io(void);
-
-extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2410_init_clocks(int xtal);
-
-#else
-#define s3c2410_init_clocks NULL
-#define s3c2410_init_uarts NULL
-#define s3c2410_map_io NULL
-#define s3c2410_init NULL
-#define s3c2410a_init NULL
-#endif
-
-extern int s3c2410_baseclk_add(void);
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2412.h b/arch/arm/plat-s3c24xx/include/plat/s3c2412.h
deleted file mode 100644
index bb15d3b68be..00000000000
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2412.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/s3c2412.h
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2412 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2412
-
-extern  int s3c2412_init(void);
-
-extern void s3c2412_map_io(void);
-
-extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2412_init_clocks(int xtal);
-
-extern  int s3c2412_baseclk_add(void);
-#else
-#define s3c2412_init_clocks NULL
-#define s3c2412_init_uarts NULL
-#define s3c2412_map_io NULL
-#define s3c2412_init NULL
-#endif
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2416.h b/arch/arm/plat-s3c24xx/include/plat/s3c2416.h
deleted file mode 100644
index dc3c0907d22..00000000000
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2416.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/s3c2443.h
- *
- * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>
- *
- * Header file for s3c2416 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2416
-
-struct s3c2410_uartcfg;
-
-extern  int s3c2416_init(void);
-
-extern void s3c2416_map_io(void);
-
-extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2416_init_clocks(int xtal);
-
-extern  int s3c2416_baseclk_add(void);
-
-#else
-#define s3c2416_init_clocks NULL
-#define s3c2416_init_uarts NULL
-#define s3c2416_map_io NULL
-#define s3c2416_init NULL
-#endif
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2443.h b/arch/arm/plat-s3c24xx/include/plat/s3c2443.h
deleted file mode 100644
index a19715feb79..00000000000
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2443.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/s3c2443.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2443 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2443
-
-struct s3c2410_uartcfg;
-
-extern  int s3c2443_init(void);
-
-extern void s3c2443_map_io(void);
-
-extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2443_init_clocks(int xtal);
-
-extern  int s3c2443_baseclk_add(void);
-
-#else
-#define s3c2443_init_clocks NULL
-#define s3c2443_init_uarts NULL
-#define s3c2443_map_io NULL
-#define s3c2443_init NULL
-#endif
-
-/* common code used by s3c2443 and others.
- * note, not to be used outside of arch/arm/mach-s3c* */
-
-struct clk;	/* some files don't need clk.h otherwise */
-
-typedef unsigned int (*pll_fn)(unsigned int reg, unsigned int base);
-typedef unsigned int (*fdiv_fn)(unsigned long clkcon0);
-
-extern void s3c2443_common_setup_clocks(pll_fn get_mpll, fdiv_fn fdiv);
-extern void s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, fdiv_fn fdiv);
-
-extern int s3c2443_clkcon_enable_h(struct clk *clk, int enable);
-extern int s3c2443_clkcon_enable_p(struct clk *clk, int enable);
-extern int s3c2443_clkcon_enable_s(struct clk *clk, int enable);
-
-extern struct clksrc_clk clk_epllref;
-extern struct clksrc_clk clk_esysclk;
-extern struct clksrc_clk clk_msysclk;
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c244x.h b/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
deleted file mode 100644
index 89e8d0a25f8..00000000000
--- a/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for S3C2440 and S3C2442 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
-
-extern void s3c244x_map_io(void);
-
-extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c244x_init_clocks(int xtal);
-
-#else
-#define s3c244x_init_clocks NULL
-#define s3c244x_init_uarts NULL
-#endif
-
-#ifdef CONFIG_CPU_S3C2440
-extern  int s3c2440_init(void);
-
-extern void s3c2440_map_io(void);
-#else
-#define s3c2440_init NULL
-#define s3c2440_map_io NULL
-#endif
-
-#ifdef CONFIG_CPU_S3C2442
-extern  int s3c2442_init(void);
-
-extern void s3c2442_map_io(void);
-#else
-#define s3c2442_init NULL
-#define s3c2442_map_io NULL
-#endif
diff --git a/arch/arm/plat-s5p/include/plat/exynos4.h b/arch/arm/plat-s5p/include/plat/exynos4.h
deleted file mode 100644
index 907caab53dc..00000000000
--- a/arch/arm/plat-s5p/include/plat/exynos4.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* linux/arch/arm/plat-s5p/include/plat/exynos4.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Header file for exynos4 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for EXYNOS4 related SoCs */
-
-extern void exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void exynos4_register_clocks(void);
-extern void exynos4_setup_clocks(void);
-
-#ifdef CONFIG_CPU_EXYNOS4210
-
-extern  int exynos4_init(void);
-extern void exynos4_init_irq(void);
-extern void exynos4_map_io(void);
-extern void exynos4_init_clocks(int xtal);
-extern struct sys_timer exynos4_timer;
-
-#define exynos4_init_uarts exynos4_common_init_uarts
-
-#else
-#define exynos4_init_clocks NULL
-#define exynos4_init_uarts NULL
-#define exynos4_map_io NULL
-#define exynos4_init NULL
-#endif
diff --git a/arch/arm/plat-s5p/include/plat/s5p6440.h b/arch/arm/plat-s5p/include/plat/s5p6440.h
deleted file mode 100644
index 528585d2caf..00000000000
--- a/arch/arm/plat-s5p/include/plat/s5p6440.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* arch/arm/plat-s5p/include/plat/s5p6440.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Header file for s5p6440 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
- /* Common init code for S5P6440 related SoCs */
-
-extern void s5p6440_register_clocks(void);
-extern void s5p6440_setup_clocks(void);
-
-#ifdef CONFIG_CPU_S5P6440
-
-extern  int s5p64x0_init(void);
-extern void s5p6440_init_irq(void);
-extern void s5p6440_map_io(void);
-extern void s5p6440_init_clocks(int xtal);
-
-extern void s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-#else
-#define s5p6440_init_clocks NULL
-#define s5p6440_init_uarts NULL
-#define s5p6440_map_io NULL
-#define s5p64x0_init NULL
-#endif
-
-/* S5P6440 timer */
-
-extern struct sys_timer s5p6440_timer;
diff --git a/arch/arm/plat-s5p/include/plat/s5p6450.h b/arch/arm/plat-s5p/include/plat/s5p6450.h
deleted file mode 100644
index 640a41c26be..00000000000
--- a/arch/arm/plat-s5p/include/plat/s5p6450.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* arch/arm/plat-s5p/include/plat/s5p6450.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Header file for s5p6450 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for S5P6450 related SoCs */
-
-extern void s5p6450_register_clocks(void);
-extern void s5p6450_setup_clocks(void);
-
-#ifdef CONFIG_CPU_S5P6450
-
-extern  int s5p64x0_init(void);
-extern void s5p6450_init_irq(void);
-extern void s5p6450_map_io(void);
-extern void s5p6450_init_clocks(int xtal);
-
-extern void s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-#else
-#define s5p6450_init_clocks NULL
-#define s5p6450_init_uarts NULL
-#define s5p6450_map_io NULL
-#define s5p64x0_init NULL
-#endif
-
-/* S5P6450 timer */
-
-extern struct sys_timer s5p6450_timer;
diff --git a/arch/arm/plat-s5p/include/plat/s5pc100.h b/arch/arm/plat-s5p/include/plat/s5pc100.h
deleted file mode 100644
index 5f6099dd7ca..00000000000
--- a/arch/arm/plat-s5p/include/plat/s5pc100.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* arch/arm/plat-s5p/include/plat/s5pc100.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Header file for s5pc100 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for S5PC100 related SoCs */
-
-extern void s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s5pc100_register_clocks(void);
-extern void s5pc100_setup_clocks(void);
-
-#ifdef CONFIG_CPU_S5PC100
-
-extern  int s5pc100_init(void);
-extern void s5pc100_init_irq(void);
-extern void s5pc100_map_io(void);
-extern void s5pc100_init_clocks(int xtal);
-
-#define s5pc100_init_uarts s5pc100_common_init_uarts
-
-#else
-#define s5pc100_init_clocks NULL
-#define s5pc100_init_uarts NULL
-#define s5pc100_map_io NULL
-#define s5pc100_init NULL
-#endif
diff --git a/arch/arm/plat-s5p/include/plat/s5pv210.h b/arch/arm/plat-s5p/include/plat/s5pv210.h
deleted file mode 100644
index 6c93a0c7810..00000000000
--- a/arch/arm/plat-s5p/include/plat/s5pv210.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* linux/arch/arm/plat-s5p/include/plat/s5pv210.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Header file for s5pv210 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for S5PV210 related SoCs */
-
-extern void s5pv210_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s5pv210_register_clocks(void);
-extern void s5pv210_setup_clocks(void);
-
-#ifdef CONFIG_CPU_S5PV210
-
-extern  int s5pv210_init(void);
-extern void s5pv210_init_irq(void);
-extern void s5pv210_map_io(void);
-extern void s5pv210_init_clocks(int xtal);
-
-#define s5pv210_init_uarts s5pv210_common_init_uarts
-
-#else
-#define s5pv210_init_clocks NULL
-#define s5pv210_init_uarts NULL
-#define s5pv210_map_io NULL
-#define s5pv210_init NULL
-#endif
diff --git a/arch/arm/plat-samsung/include/plat/exynos4.h b/arch/arm/plat-samsung/include/plat/exynos4.h
new file mode 100644
index 00000000000..691a7113fff
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/exynos4.h
@@ -0,0 +1,34 @@
+/* linux/arch/arm/plat-samsung/include/plat/exynos4.h
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Header file for exynos4 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for EXYNOS4 related SoCs */
+
+extern void exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void exynos4_register_clocks(void);
+extern void exynos4_setup_clocks(void);
+
+#ifdef CONFIG_CPU_EXYNOS4210
+
+extern  int exynos4_init(void);
+extern void exynos4_init_irq(void);
+extern void exynos4_map_io(void);
+extern void exynos4_init_clocks(int xtal);
+extern struct sys_timer exynos4_timer;
+
+#define exynos4_init_uarts exynos4_common_init_uarts
+
+#else
+#define exynos4_init_clocks NULL
+#define exynos4_init_uarts NULL
+#define exynos4_map_io NULL
+#define exynos4_init NULL
+#endif
diff --git a/arch/arm/plat-samsung/include/plat/s3c2410.h b/arch/arm/plat-samsung/include/plat/s3c2410.h
new file mode 100644
index 00000000000..3986497dd3f
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/s3c2410.h
@@ -0,0 +1,33 @@
+/* linux/arch/arm/plat-samsung/include/plat/s3c2410.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2410 machine directory
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#ifdef CONFIG_CPU_S3C2410
+
+extern  int s3c2410_init(void);
+extern  int s3c2410a_init(void);
+
+extern void s3c2410_map_io(void);
+
+extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c2410_init_clocks(int xtal);
+
+#else
+#define s3c2410_init_clocks NULL
+#define s3c2410_init_uarts NULL
+#define s3c2410_map_io NULL
+#define s3c2410_init NULL
+#define s3c2410a_init NULL
+#endif
+
+extern int s3c2410_baseclk_add(void);
diff --git a/arch/arm/plat-samsung/include/plat/s3c2412.h b/arch/arm/plat-samsung/include/plat/s3c2412.h
new file mode 100644
index 00000000000..5bcfd143ba1
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/s3c2412.h
@@ -0,0 +1,29 @@
+/* linux/arch/arm/plat-samsung/include/plat/s3c2412.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2412 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifdef CONFIG_CPU_S3C2412
+
+extern  int s3c2412_init(void);
+
+extern void s3c2412_map_io(void);
+
+extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c2412_init_clocks(int xtal);
+
+extern  int s3c2412_baseclk_add(void);
+#else
+#define s3c2412_init_clocks NULL
+#define s3c2412_init_uarts NULL
+#define s3c2412_map_io NULL
+#define s3c2412_init NULL
+#endif
diff --git a/arch/arm/plat-samsung/include/plat/s3c2416.h b/arch/arm/plat-samsung/include/plat/s3c2416.h
new file mode 100644
index 00000000000..a764f8503f5
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/s3c2416.h
@@ -0,0 +1,31 @@
+/* linux/arch/arm/plat-samsung/include/plat/s3c2416.h
+ *
+ * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>
+ *
+ * Header file for s3c2416 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifdef CONFIG_CPU_S3C2416
+
+struct s3c2410_uartcfg;
+
+extern  int s3c2416_init(void);
+
+extern void s3c2416_map_io(void);
+
+extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c2416_init_clocks(int xtal);
+
+extern  int s3c2416_baseclk_add(void);
+
+#else
+#define s3c2416_init_clocks NULL
+#define s3c2416_init_uarts NULL
+#define s3c2416_map_io NULL
+#define s3c2416_init NULL
+#endif
diff --git a/arch/arm/plat-samsung/include/plat/s3c2443.h b/arch/arm/plat-samsung/include/plat/s3c2443.h
new file mode 100644
index 00000000000..4b2ac9a272b
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/s3c2443.h
@@ -0,0 +1,51 @@
+/* linux/arch/arm/plat-samsung/include/plat/s3c2443.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2443 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifdef CONFIG_CPU_S3C2443
+
+struct s3c2410_uartcfg;
+
+extern  int s3c2443_init(void);
+
+extern void s3c2443_map_io(void);
+
+extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c2443_init_clocks(int xtal);
+
+extern  int s3c2443_baseclk_add(void);
+
+#else
+#define s3c2443_init_clocks NULL
+#define s3c2443_init_uarts NULL
+#define s3c2443_map_io NULL
+#define s3c2443_init NULL
+#endif
+
+/* common code used by s3c2443 and others.
+ * note, not to be used outside of arch/arm/mach-s3c* */
+
+struct clk;	/* some files don't need clk.h otherwise */
+
+typedef unsigned int (*pll_fn)(unsigned int reg, unsigned int base);
+typedef unsigned int (*fdiv_fn)(unsigned long clkcon0);
+
+extern void s3c2443_common_setup_clocks(pll_fn get_mpll, fdiv_fn fdiv);
+extern void s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, fdiv_fn fdiv);
+
+extern int s3c2443_clkcon_enable_h(struct clk *clk, int enable);
+extern int s3c2443_clkcon_enable_p(struct clk *clk, int enable);
+extern int s3c2443_clkcon_enable_s(struct clk *clk, int enable);
+
+extern struct clksrc_clk clk_epllref;
+extern struct clksrc_clk clk_esysclk;
+extern struct clksrc_clk clk_msysclk;
diff --git a/arch/arm/plat-samsung/include/plat/s3c244x.h b/arch/arm/plat-samsung/include/plat/s3c244x.h
new file mode 100644
index 00000000000..ea0c961b760
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/s3c244x.h
@@ -0,0 +1,42 @@
+/* linux/arch/arm/plat-samsung/include/plat/s3c244x.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C2440 and S3C2442 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
+
+extern void s3c244x_map_io(void);
+
+extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c244x_init_clocks(int xtal);
+
+#else
+#define s3c244x_init_clocks NULL
+#define s3c244x_init_uarts NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2440
+extern  int s3c2440_init(void);
+
+extern void s3c2440_map_io(void);
+#else
+#define s3c2440_init NULL
+#define s3c2440_map_io NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2442
+extern  int s3c2442_init(void);
+
+extern void s3c2442_map_io(void);
+#else
+#define s3c2442_init NULL
+#define s3c2442_map_io NULL
+#endif
diff --git a/arch/arm/plat-samsung/include/plat/s3c6400.h b/arch/arm/plat-samsung/include/plat/s3c6400.h
new file mode 100644
index 00000000000..37d428aaaeb
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/s3c6400.h
@@ -0,0 +1,36 @@
+/* linux/arch/arm/plat-samsung/include/plat/s3c6400.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Header file for s3c6400 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S3C6400 related SoCs */
+
+extern void s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c6400_setup_clocks(void);
+
+extern void s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_limit);
+
+#ifdef CONFIG_CPU_S3C6400
+
+extern  int s3c6400_init(void);
+extern void s3c6400_init_irq(void);
+extern void s3c6400_map_io(void);
+extern void s3c6400_init_clocks(int xtal);
+
+#define s3c6400_init_uarts s3c6400_common_init_uarts
+
+#else
+#define s3c6400_init_clocks NULL
+#define s3c6400_init_uarts NULL
+#define s3c6400_map_io NULL
+#define s3c6400_init NULL
+#endif
diff --git a/arch/arm/plat-samsung/include/plat/s3c6410.h b/arch/arm/plat-samsung/include/plat/s3c6410.h
new file mode 100644
index 00000000000..20a6675b9d1
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/s3c6410.h
@@ -0,0 +1,29 @@
+/* linux/arch/arm/plat-samsung/include/plat/s3c6410.h
+ *
+ * Copyright 2008 Openmoko,  Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Header file for s3c6410 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifdef CONFIG_CPU_S3C6410
+
+extern  int s3c6410_init(void);
+extern void s3c6410_init_irq(void);
+extern void s3c6410_map_io(void);
+extern void s3c6410_init_clocks(int xtal);
+
+#define s3c6410_init_uarts s3c6400_common_init_uarts
+
+#else
+#define s3c6410_init_clocks NULL
+#define s3c6410_init_uarts NULL
+#define s3c6410_map_io NULL
+#define s3c6410_init NULL
+#endif
diff --git a/arch/arm/plat-samsung/include/plat/s5p6440.h b/arch/arm/plat-samsung/include/plat/s5p6440.h
new file mode 100644
index 00000000000..bf85ebbb4fb
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/s5p6440.h
@@ -0,0 +1,36 @@
+/* linux/arch/arm/plat-samsung/include/plat/s5p6440.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Header file for s5p6440 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+ /* Common init code for S5P6440 related SoCs */
+
+extern void s5p6440_register_clocks(void);
+extern void s5p6440_setup_clocks(void);
+
+#ifdef CONFIG_CPU_S5P6440
+
+extern  int s5p64x0_init(void);
+extern void s5p6440_init_irq(void);
+extern void s5p6440_map_io(void);
+extern void s5p6440_init_clocks(int xtal);
+
+extern void s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+#else
+#define s5p6440_init_clocks NULL
+#define s5p6440_init_uarts NULL
+#define s5p6440_map_io NULL
+#define s5p64x0_init NULL
+#endif
+
+/* S5P6440 timer */
+
+extern struct sys_timer s5p6440_timer;
diff --git a/arch/arm/plat-samsung/include/plat/s5p6450.h b/arch/arm/plat-samsung/include/plat/s5p6450.h
new file mode 100644
index 00000000000..da25f9a1c54
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/s5p6450.h
@@ -0,0 +1,36 @@
+/* linux/arch/arm/plat-samsung/include/plat/s5p6450.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Header file for s5p6450 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S5P6450 related SoCs */
+
+extern void s5p6450_register_clocks(void);
+extern void s5p6450_setup_clocks(void);
+
+#ifdef CONFIG_CPU_S5P6450
+
+extern  int s5p64x0_init(void);
+extern void s5p6450_init_irq(void);
+extern void s5p6450_map_io(void);
+extern void s5p6450_init_clocks(int xtal);
+
+extern void s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+#else
+#define s5p6450_init_clocks NULL
+#define s5p6450_init_uarts NULL
+#define s5p6450_map_io NULL
+#define s5p64x0_init NULL
+#endif
+
+/* S5P6450 timer */
+
+extern struct sys_timer s5p6450_timer;
diff --git a/arch/arm/plat-samsung/include/plat/s5pc100.h b/arch/arm/plat-samsung/include/plat/s5pc100.h
new file mode 100644
index 00000000000..9a21aeaaf45
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/s5pc100.h
@@ -0,0 +1,33 @@
+/* linux/arch/arm/plat-samsung/include/plat/s5pc100.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Header file for s5pc100 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S5PC100 related SoCs */
+
+extern void s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s5pc100_register_clocks(void);
+extern void s5pc100_setup_clocks(void);
+
+#ifdef CONFIG_CPU_S5PC100
+
+extern  int s5pc100_init(void);
+extern void s5pc100_init_irq(void);
+extern void s5pc100_map_io(void);
+extern void s5pc100_init_clocks(int xtal);
+
+#define s5pc100_init_uarts s5pc100_common_init_uarts
+
+#else
+#define s5pc100_init_clocks NULL
+#define s5pc100_init_uarts NULL
+#define s5pc100_map_io NULL
+#define s5pc100_init NULL
+#endif
diff --git a/arch/arm/plat-samsung/include/plat/s5pv210.h b/arch/arm/plat-samsung/include/plat/s5pv210.h
new file mode 100644
index 00000000000..b4bc6be7707
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/s5pv210.h
@@ -0,0 +1,33 @@
+/* linux/arch/arm/plat-samsung/include/plat/s5pv210.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Header file for s5pv210 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S5PV210 related SoCs */
+
+extern void s5pv210_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s5pv210_register_clocks(void);
+extern void s5pv210_setup_clocks(void);
+
+#ifdef CONFIG_CPU_S5PV210
+
+extern  int s5pv210_init(void);
+extern void s5pv210_init_irq(void);
+extern void s5pv210_map_io(void);
+extern void s5pv210_init_clocks(int xtal);
+
+#define s5pv210_init_uarts s5pv210_common_init_uarts
+
+#else
+#define s5pv210_init_clocks NULL
+#define s5pv210_init_uarts NULL
+#define s5pv210_map_io NULL
+#define s5pv210_init NULL
+#endif
-- 
cgit v1.2.3-18-g5258


From dc98e4145d82e471cc02d4e0b950a1945bcb084f Mon Sep 17 00:00:00 2001
From: Kukjin Kim <kgene.kim@samsung.com>
Date: Wed, 28 Sep 2011 20:48:52 +0900
Subject: ARM: SAMSUNG: Move S3C24XX header files to plat-samsung

This patch moves header files from plat-s3c24xx to plat-samsung to
remove plat-s3c24xx directory to make one plat-samsung directory for
Samsung SoCs. And this patch includes fixing coding style, too.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/plat-s3c24xx/include/plat/audio-simtec.h  |  37 ---
 arch/arm/plat-s3c24xx/include/plat/common-smdk.h   |  15 --
 arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h | 287 --------------------
 arch/arm/plat-s3c24xx/include/plat/fiq.h           |  13 -
 arch/arm/plat-s3c24xx/include/plat/irq.h           | 115 --------
 arch/arm/plat-s3c24xx/include/plat/mci.h           |  52 ----
 arch/arm/plat-s3c24xx/include/plat/regs-dma.h      | 145 -----------
 arch/arm/plat-s3c24xx/include/plat/regs-iis.h      |  68 -----
 arch/arm/plat-s3c24xx/include/plat/regs-spi.h      |  81 ------
 arch/arm/plat-s3c24xx/include/plat/regs-udc.h      | 153 -----------
 arch/arm/plat-s3c24xx/include/plat/udc.h           |  57 ----
 arch/arm/plat-samsung/include/plat/audio-simtec.h  |  37 +++
 arch/arm/plat-samsung/include/plat/common-smdk.h   |  15 ++
 arch/arm/plat-samsung/include/plat/cpu-freq-core.h | 288 +++++++++++++++++++++
 arch/arm/plat-samsung/include/plat/fiq.h           |  13 +
 arch/arm/plat-samsung/include/plat/irq.h           | 116 +++++++++
 arch/arm/plat-samsung/include/plat/mci.h           |  52 ++++
 arch/arm/plat-samsung/include/plat/regs-dma.h      | 151 +++++++++++
 arch/arm/plat-samsung/include/plat/regs-iis.h      |  70 +++++
 arch/arm/plat-samsung/include/plat/regs-spi.h      |  48 ++++
 arch/arm/plat-samsung/include/plat/regs-udc.h      | 151 +++++++++++
 arch/arm/plat-samsung/include/plat/udc.h           |  57 ++++
 22 files changed, 998 insertions(+), 1023 deletions(-)
 delete mode 100644 arch/arm/plat-s3c24xx/include/plat/audio-simtec.h
 delete mode 100644 arch/arm/plat-s3c24xx/include/plat/common-smdk.h
 delete mode 100644 arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
 delete mode 100644 arch/arm/plat-s3c24xx/include/plat/fiq.h
 delete mode 100644 arch/arm/plat-s3c24xx/include/plat/irq.h
 delete mode 100644 arch/arm/plat-s3c24xx/include/plat/mci.h
 delete mode 100644 arch/arm/plat-s3c24xx/include/plat/regs-dma.h
 delete mode 100644 arch/arm/plat-s3c24xx/include/plat/regs-iis.h
 delete mode 100644 arch/arm/plat-s3c24xx/include/plat/regs-spi.h
 delete mode 100644 arch/arm/plat-s3c24xx/include/plat/regs-udc.h
 delete mode 100644 arch/arm/plat-s3c24xx/include/plat/udc.h
 create mode 100644 arch/arm/plat-samsung/include/plat/audio-simtec.h
 create mode 100644 arch/arm/plat-samsung/include/plat/common-smdk.h
 create mode 100644 arch/arm/plat-samsung/include/plat/cpu-freq-core.h
 create mode 100644 arch/arm/plat-samsung/include/plat/fiq.h
 create mode 100644 arch/arm/plat-samsung/include/plat/irq.h
 create mode 100644 arch/arm/plat-samsung/include/plat/mci.h
 create mode 100644 arch/arm/plat-samsung/include/plat/regs-dma.h
 create mode 100644 arch/arm/plat-samsung/include/plat/regs-iis.h
 create mode 100644 arch/arm/plat-samsung/include/plat/regs-spi.h
 create mode 100644 arch/arm/plat-samsung/include/plat/regs-udc.h
 create mode 100644 arch/arm/plat-samsung/include/plat/udc.h

(limited to 'arch')

diff --git a/arch/arm/plat-s3c24xx/include/plat/audio-simtec.h b/arch/arm/plat-s3c24xx/include/plat/audio-simtec.h
deleted file mode 100644
index de5e88fdcb3..00000000000
--- a/arch/arm/plat-s3c24xx/include/plat/audio-simtec.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/* arch/arm/plat-s3c24xx/include/plat/audio-simtec.h
- *
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Simtec Audio support.
-*/
-
-/**
- * struct s3c24xx_audio_simtec_pdata - platform data for simtec audio
- * @use_mpllin: Select codec clock from MPLLin
- * @output_cdclk: Need to output CDCLK to the codec
- * @have_mic: Set if we have a MIC socket
- * @have_lout: Set if we have a LineOut socket
- * @amp_gpio: GPIO pin to enable the AMP
- * @amp_gain: Option GPIO to control AMP gain
- */
-struct s3c24xx_audio_simtec_pdata {
-	unsigned int	use_mpllin:1;
-	unsigned int	output_cdclk:1;
-
-	unsigned int	have_mic:1;
-	unsigned int	have_lout:1;
-
-	int		amp_gpio;
-	int		amp_gain[2];
-
-	void	(*startup)(void);
-};
-
-extern int simtec_audio_add(const char *codec_name, bool has_lr_routing,
-			    struct s3c24xx_audio_simtec_pdata *pdata);
diff --git a/arch/arm/plat-s3c24xx/include/plat/common-smdk.h b/arch/arm/plat-s3c24xx/include/plat/common-smdk.h
deleted file mode 100644
index 58d9094c935..00000000000
--- a/arch/arm/plat-s3c24xx/include/plat/common-smdk.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/common-smdk.h
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Common code for SMDK2410 and SMDK2440 boards
- *
- * http://www.fluff.org/ben/smdk2440/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-extern void smdk_machine_init(void);
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
deleted file mode 100644
index d623235ae96..00000000000
--- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
+++ /dev/null
@@ -1,287 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/cpu-freq.h
- *
- * Copyright (c) 2006-2009 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C CPU frequency scaling support - core support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <plat/cpu-freq.h>
-
-struct seq_file;
-
-#define MAX_BANKS (8)
-#define S3C2412_MAX_IO	(8)
-
-/**
- * struct s3c2410_iobank_timing - IO bank timings for S3C2410 style timings
- * @bankcon: The cached version of settings in this structure.
- * @tacp:
- * @tacs: Time from address valid to nCS asserted.
- * @tcos: Time from nCS asserted to nOE or nWE asserted.
- * @tacc: Time that nOE or nWE is asserted.
- * @tcoh: Time nCS is held after nOE or nWE are released.
- * @tcah: Time address is held for after
- * @nwait_en: Whether nWAIT is enabled for this bank.
- *
- * This structure represents the IO timings for a S3C2410 style IO bank
- * used by the CPU frequency support if it needs to change the settings
- * of the IO.
- */
-struct s3c2410_iobank_timing {
-	unsigned long	bankcon;
-	unsigned int	tacp;
-	unsigned int	tacs;
-	unsigned int	tcos;
-	unsigned int	tacc;
-	unsigned int	tcoh;		/* nCS hold afrer nOE/nWE */
-	unsigned int	tcah;		/* Address hold after nCS */
-	unsigned char	nwait_en;	/* nWait enabled for bank. */
-};
-
-/**
- * struct s3c2412_iobank_timing - io timings for PL092 (S3C2412) style IO
- * @idcy: The idle cycle time between transactions.
- * @wstrd: nCS release to end of read cycle.
- * @wstwr: nCS release to end of write cycle.
- * @wstoen: nCS assertion to nOE assertion time.
- * @wstwen: nCS assertion to nWE assertion time.
- * @wstbrd: Burst ready delay.
- * @smbidcyr: Register cache for smbidcyr value.
- * @smbwstrd: Register cache for smbwstrd value.
- * @smbwstwr: Register cache for smbwstwr value.
- * @smbwstoen: Register cache for smbwstoen value.
- * @smbwstwen: Register cache for smbwstwen value.
- * @smbwstbrd: Register cache for smbwstbrd value.
- *
- * Timing information for a IO bank on an S3C2412 or similar system which
- * uses a PL093 block.
- */
-struct s3c2412_iobank_timing {
-	unsigned int	idcy;
-	unsigned int	wstrd;
-	unsigned int	wstwr;
-	unsigned int	wstoen;
-	unsigned int	wstwen;
-	unsigned int	wstbrd;
-
-	/* register cache */
-	unsigned char	smbidcyr;
-	unsigned char	smbwstrd;
-	unsigned char	smbwstwr;
-	unsigned char	smbwstoen;
-	unsigned char	smbwstwen;
-	unsigned char	smbwstbrd;
-};
-
-union s3c_iobank {
-	struct s3c2410_iobank_timing	*io_2410;
-	struct s3c2412_iobank_timing	*io_2412;
-};
-
-/**
- * struct s3c_iotimings - Chip IO timings holder
- * @bank: The timings for each IO bank.
- */
-struct s3c_iotimings {
-	union s3c_iobank	bank[MAX_BANKS];
-};
-
-/**
- * struct s3c_plltab - PLL table information.
- * @vals: List of PLL values.
- * @size: Size of the PLL table @vals.
- */
-struct s3c_plltab {
-	struct s3c_pllval	*vals;
-	int			 size;
-};
-
-/**
- * struct s3c_cpufreq_config - current cpu frequency configuration
- * @freq: The current settings for the core clocks.
- * @max: Maxium settings, derived from core, board and user settings.
- * @pll: The PLL table entry for the current PLL settings.
- * @divs: The divisor settings for the core clocks.
- * @info: The current core driver information.
- * @board: The information for the board we are running on.
- * @lock_pll: Set if the PLL settings cannot be changed.
- *
- * This is for the core drivers that need to know information about
- * the current settings and values. It should not be needed by any
- * device drivers.
-*/
-struct s3c_cpufreq_config {
-	struct s3c_freq		freq;
-	struct s3c_freq		max;
-	struct cpufreq_frequency_table pll;
-	struct s3c_clkdivs	divs;
-	struct s3c_cpufreq_info *info;	/* for core, not drivers */
-	struct s3c_cpufreq_board *board;
-
-	unsigned int	lock_pll:1;
-};
-
-/**
- * struct s3c_cpufreq_info - Information for the CPU frequency driver.
- * @name: The name of this implementation.
- * @max: The maximum frequencies for the system.
- * @latency: Transition latency to give to cpufreq.
- * @locktime_m: The lock-time in uS for the MPLL.
- * @locktime_u: The lock-time in uS for the UPLL.
- * @locttime_bits: The number of bits each LOCKTIME field.
- * @need_pll: Set if this driver needs to change the PLL values to achieve
- *	any frequency changes. This is really only need by devices like the
- *	S3C2410 where there is no or limited divider between the PLL and the
- *	ARMCLK.
- * @resume_clocks: Update the clocks on resume.
- * @get_iotiming: Get the current IO timing data, mainly for use at start.
- * @set_iotiming: Update the IO timings from the cached copies calculated
- *	from the @calc_iotiming entry when changing the frequency.
- * @calc_iotiming: Calculate and update the cached copies of the IO timings
- *	from the newly calculated frequencies.
- * @calc_freqtable: Calculate (fill in) the given frequency table from the
- *	current frequency configuration. If the table passed in is NULL,
- *	then the return is the number of elements to be filled for allocation
- *	of the table.
- * @set_refresh: Set the memory refresh configuration.
- * @set_fvco: Set the PLL frequencies.
- * @set_divs: Update the clock divisors.
- * @calc_divs: Calculate the clock divisors.
- */
-struct s3c_cpufreq_info {
-	const char		*name;
-	struct s3c_freq		max;
-
-	unsigned int		latency;
-
-	unsigned int		locktime_m;
-	unsigned int		locktime_u;
-	unsigned char		locktime_bits;
-
-	unsigned int		need_pll:1;
-
-	/* driver routines */
-
-	void		(*resume_clocks)(void);
-
-	int		(*get_iotiming)(struct s3c_cpufreq_config *cfg,
-					struct s3c_iotimings *timings);
-
-	void		(*set_iotiming)(struct s3c_cpufreq_config *cfg,
-					struct s3c_iotimings *timings);
-
-	int		(*calc_iotiming)(struct s3c_cpufreq_config *cfg,
-					 struct s3c_iotimings *timings);
-
-	int		(*calc_freqtable)(struct s3c_cpufreq_config *cfg,
-					  struct cpufreq_frequency_table *t,
-					  size_t table_size);
-
-	void		(*debug_io_show)(struct seq_file *seq,
-					 struct s3c_cpufreq_config *cfg,
-					 union s3c_iobank *iob);
-
-	void		(*set_refresh)(struct s3c_cpufreq_config *cfg);
-	void		(*set_fvco)(struct s3c_cpufreq_config *cfg);
-	void		(*set_divs)(struct s3c_cpufreq_config *cfg);
-	int		(*calc_divs)(struct s3c_cpufreq_config *cfg);
-};
-
-extern int s3c_cpufreq_register(struct s3c_cpufreq_info *info);
-
-extern int s3c_plltab_register(struct cpufreq_frequency_table *plls, unsigned int plls_no);
-
-/* exports and utilities for debugfs */
-extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void);
-extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void);
-
-extern void s3c2410_iotiming_debugfs(struct seq_file *seq,
-				     struct s3c_cpufreq_config *cfg,
-				     union s3c_iobank *iob);
-
-extern void s3c2412_iotiming_debugfs(struct seq_file *seq,
-				     struct s3c_cpufreq_config *cfg,
-				     union s3c_iobank *iob);
-
-#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
-#define s3c_cpufreq_debugfs_call(x) x
-#else
-#define s3c_cpufreq_debugfs_call(x) NULL
-#endif
-
-/* Useful utility functions. */
-
-extern struct clk *s3c_cpufreq_clk_get(struct device *, const char *);
-
-/* S3C2410 and compatible exported functions */
-
-extern void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg);
-extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg);
-
-#ifdef CONFIG_S3C2410_IOTIMING
-extern int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
-				 struct s3c_iotimings *iot);
-
-extern int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
-				struct s3c_iotimings *timings);
-
-extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
-				 struct s3c_iotimings *iot);
-#else
-#define s3c2410_iotiming_calc NULL
-#define s3c2410_iotiming_get NULL
-#define s3c2410_iotiming_set NULL
-#endif /* CONFIG_S3C2410_IOTIMING */
-
-/* S3C2412 compatible routines */
-
-extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
-				struct s3c_iotimings *timings);
-
-extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
-				struct s3c_iotimings *timings);
-
-extern int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
-				 struct s3c_iotimings *iot);
-
-extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
-				 struct s3c_iotimings *iot);
-
-#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG
-#define s3c_freq_dbg(x...) printk(KERN_INFO x)
-#else
-#define s3c_freq_dbg(x...) do { if (0) printk(x); } while (0)
-#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUG */
-
-#ifdef CONFIG_CPU_FREQ_S3C24XX_IODEBUG
-#define s3c_freq_iodbg(x...) printk(KERN_INFO x)
-#else
-#define s3c_freq_iodbg(x...) do { if (0) printk(x); } while (0)
-#endif /* CONFIG_CPU_FREQ_S3C24XX_IODEBUG */
-
-static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table,
-				      int index, size_t table_size,
-				      unsigned int freq)
-{
-	if (index < 0)
-		return index;
-
-	if (table) {
-		if (index >= table_size)
-			return -ENOMEM;
-
-		s3c_freq_dbg("%s: { %d = %u kHz }\n",
-			     __func__, index, freq);
-
-		table[index].index = index;
-		table[index].frequency = freq;
-	}
-
-	return index + 1;
-}
diff --git a/arch/arm/plat-s3c24xx/include/plat/fiq.h b/arch/arm/plat-s3c24xx/include/plat/fiq.h
deleted file mode 100644
index 8521b8372c5..00000000000
--- a/arch/arm/plat-s3c24xx/include/plat/fiq.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/fiq.h
- *
- * Copyright (c) 2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for S3C24XX CPU FIQ support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-extern int s3c24xx_set_fiq(unsigned int irq, bool on);
diff --git a/arch/arm/plat-s3c24xx/include/plat/irq.h b/arch/arm/plat-s3c24xx/include/plat/irq.h
deleted file mode 100644
index ec087d6054b..00000000000
--- a/arch/arm/plat-s3c24xx/include/plat/irq.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/irq.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for S3C24XX CPU IRQ support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#define irqdbf(x...)
-#define irqdbf2(x...)
-
-#define EXTINT_OFF (IRQ_EINT4 - 4)
-
-/* these are exported for arch/arm/mach-* usage */
-extern struct irq_chip s3c_irq_level_chip;
-extern struct irq_chip s3c_irq_chip;
-
-static inline void
-s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit,
-		int subcheck)
-{
-	unsigned long mask;
-	unsigned long submask;
-
-	submask = __raw_readl(S3C2410_INTSUBMSK);
-	mask = __raw_readl(S3C2410_INTMSK);
-
-	submask |= (1UL << (irqno - IRQ_S3CUART_RX0));
-
-	/* check to see if we need to mask the parent IRQ */
-
-	if ((submask  & subcheck) == subcheck) {
-		__raw_writel(mask | parentbit, S3C2410_INTMSK);
-	}
-
-	/* write back masks */
-	__raw_writel(submask, S3C2410_INTSUBMSK);
-
-}
-
-static inline void
-s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit)
-{
-	unsigned long mask;
-	unsigned long submask;
-
-	submask = __raw_readl(S3C2410_INTSUBMSK);
-	mask = __raw_readl(S3C2410_INTMSK);
-
-	submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0));
-	mask &= ~parentbit;
-
-	/* write back masks */
-	__raw_writel(submask, S3C2410_INTSUBMSK);
-	__raw_writel(mask, S3C2410_INTMSK);
-}
-
-
-static inline void
-s3c_irqsub_maskack(unsigned int irqno, unsigned int parentmask, unsigned int group)
-{
-	unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
-
-	s3c_irqsub_mask(irqno, parentmask, group);
-
-	__raw_writel(bit, S3C2410_SUBSRCPND);
-
-	/* only ack parent if we've got all the irqs (seems we must
-	 * ack, all and hope that the irq system retriggers ok when
-	 * the interrupt goes off again)
-	 */
-
-	if (1) {
-		__raw_writel(parentmask, S3C2410_SRCPND);
-		__raw_writel(parentmask, S3C2410_INTPND);
-	}
-}
-
-static inline void
-s3c_irqsub_ack(unsigned int irqno, unsigned int parentmask, unsigned int group)
-{
-	unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
-
-	__raw_writel(bit, S3C2410_SUBSRCPND);
-
-	/* only ack parent if we've got all the irqs (seems we must
-	 * ack, all and hope that the irq system retriggers ok when
-	 * the interrupt goes off again)
-	 */
-
-	if (1) {
-		__raw_writel(parentmask, S3C2410_SRCPND);
-		__raw_writel(parentmask, S3C2410_INTPND);
-	}
-}
-
-/* exported for use in arch/arm/mach-s3c2410 */
-
-#ifdef CONFIG_PM
-extern int s3c_irq_wake(struct irq_data *data, unsigned int state);
-#else
-#define s3c_irq_wake NULL
-#endif
-
-extern int s3c_irqext_type(struct irq_data *d, unsigned int type);
diff --git a/arch/arm/plat-s3c24xx/include/plat/mci.h b/arch/arm/plat-s3c24xx/include/plat/mci.h
deleted file mode 100644
index 2ac2b21ec49..00000000000
--- a/arch/arm/plat-s3c24xx/include/plat/mci.h
+++ /dev/null
@@ -1,52 +0,0 @@
-#ifndef _ARCH_MCI_H
-#define _ARCH_MCI_H
-
-/**
- * struct s3c24xx_mci_pdata - sd/mmc controller platform data
- * @no_wprotect: Set this to indicate there is no write-protect switch.
- * @no_detect: Set this if there is no detect switch.
- * @wprotect_invert: Invert the default sense of the write protect switch.
- * @detect_invert: Invert the default sense of the write protect switch.
- * @use_dma: Set to allow the use of DMA.
- * @gpio_detect: GPIO number for the card detect line.
- * @gpio_wprotect: GPIO number for the write protect line.
- * @ocr_avail: The mask of the available power states, non-zero to use.
- * @set_power: Callback to control the power mode.
- *
- * The @gpio_detect is used for card detection when @no_wprotect is unset,
- * and the default sense is that 0 returned from gpio_get_value() means
- * that a card is inserted. If @detect_invert is set, then the value from
- * gpio_get_value() is inverted, which makes 1 mean card inserted.
- *
- * The driver will use @gpio_wprotect to signal whether the card is write
- * protected if @no_wprotect is not set. A 0 returned from gpio_get_value()
- * means the card is read/write, and 1 means read-only. The @wprotect_invert
- * will invert the value returned from gpio_get_value().
- *
- * Card power is set by @ocr_availa, using MCC_VDD_ constants if it is set
- * to a non-zero value, otherwise the default of 3.2-3.4V is used.
- */
-struct s3c24xx_mci_pdata {
-	unsigned int	no_wprotect : 1;
-	unsigned int	no_detect : 1;
-	unsigned int	wprotect_invert : 1;
-	unsigned int	detect_invert : 1;   /* set => detect active high. */
-	unsigned int	use_dma : 1;
-
-	unsigned int	gpio_detect;
-	unsigned int	gpio_wprotect;
-	unsigned long	ocr_avail;
-	void		(*set_power)(unsigned char power_mode,
-				     unsigned short vdd);
-};
-
-/**
- * s3c24xx_mci_set_platdata - set platform data for mmc/sdi device
- * @pdata: The platform data
- *
- * Copy the platform data supplied by @pdata so that this can be marked
- * __initdata.
- */
-extern void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata);
-
-#endif /* _ARCH_NCI_H */
diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-dma.h b/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
deleted file mode 100644
index 1b0f4c36d38..00000000000
--- a/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
+++ /dev/null
@@ -1,145 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/dma.h
- *
- * Copyright (C) 2003-2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C24XX DMA support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* DMA Register definitions */
-
-#define S3C2410_DMA_DISRC		(0x00)
-#define S3C2410_DMA_DISRCC		(0x04)
-#define S3C2410_DMA_DIDST		(0x08)
-#define S3C2410_DMA_DIDSTC		(0x0C)
-#define S3C2410_DMA_DCON		(0x10)
-#define S3C2410_DMA_DSTAT		(0x14)
-#define S3C2410_DMA_DCSRC		(0x18)
-#define S3C2410_DMA_DCDST		(0x1C)
-#define S3C2410_DMA_DMASKTRIG		(0x20)
-#define S3C2412_DMA_DMAREQSEL		(0x24)
-#define S3C2443_DMA_DMAREQSEL		(0x24)
-
-#define S3C2410_DISRCC_INC		(1<<0)
-#define S3C2410_DISRCC_APB		(1<<1)
-
-#define S3C2410_DMASKTRIG_STOP		(1<<2)
-#define S3C2410_DMASKTRIG_ON		(1<<1)
-#define S3C2410_DMASKTRIG_SWTRIG	(1<<0)
-
-#define S3C2410_DCON_DEMAND		(0<<31)
-#define S3C2410_DCON_HANDSHAKE		(1<<31)
-#define S3C2410_DCON_SYNC_PCLK		(0<<30)
-#define S3C2410_DCON_SYNC_HCLK		(1<<30)
-
-#define S3C2410_DCON_INTREQ		(1<<29)
-
-#define S3C2410_DCON_CH0_XDREQ0		(0<<24)
-#define S3C2410_DCON_CH0_UART0		(1<<24)
-#define S3C2410_DCON_CH0_SDI		(2<<24)
-#define S3C2410_DCON_CH0_TIMER		(3<<24)
-#define S3C2410_DCON_CH0_USBEP1		(4<<24)
-
-#define S3C2410_DCON_CH1_XDREQ1		(0<<24)
-#define S3C2410_DCON_CH1_UART1		(1<<24)
-#define S3C2410_DCON_CH1_I2SSDI		(2<<24)
-#define S3C2410_DCON_CH1_SPI		(3<<24)
-#define S3C2410_DCON_CH1_USBEP2		(4<<24)
-
-#define S3C2410_DCON_CH2_I2SSDO		(0<<24)
-#define S3C2410_DCON_CH2_I2SSDI		(1<<24)
-#define S3C2410_DCON_CH2_SDI		(2<<24)
-#define S3C2410_DCON_CH2_TIMER		(3<<24)
-#define S3C2410_DCON_CH2_USBEP3		(4<<24)
-
-#define S3C2410_DCON_CH3_UART2		(0<<24)
-#define S3C2410_DCON_CH3_SDI		(1<<24)
-#define S3C2410_DCON_CH3_SPI		(2<<24)
-#define S3C2410_DCON_CH3_TIMER		(3<<24)
-#define S3C2410_DCON_CH3_USBEP4		(4<<24)
-
-#define S3C2410_DCON_SRCSHIFT		(24)
-#define S3C2410_DCON_SRCMASK		(7<<24)
-
-#define S3C2410_DCON_BYTE		(0<<20)
-#define S3C2410_DCON_HALFWORD		(1<<20)
-#define S3C2410_DCON_WORD		(2<<20)
-
-#define S3C2410_DCON_AUTORELOAD		(0<<22)
-#define S3C2410_DCON_NORELOAD		(1<<22)
-#define S3C2410_DCON_HWTRIG		(1<<23)
-
-#ifdef CONFIG_CPU_S3C2440
-#define S3C2440_DIDSTC_CHKINT		(1<<2)
-
-#define S3C2440_DCON_CH0_I2SSDO		(5<<24)
-#define S3C2440_DCON_CH0_PCMIN		(6<<24)
-
-#define S3C2440_DCON_CH1_PCMOUT		(5<<24)
-#define S3C2440_DCON_CH1_SDI		(6<<24)
-
-#define S3C2440_DCON_CH2_PCMIN		(5<<24)
-#define S3C2440_DCON_CH2_MICIN		(6<<24)
-
-#define S3C2440_DCON_CH3_MICIN		(5<<24)
-#define S3C2440_DCON_CH3_PCMOUT		(6<<24)
-#endif
-
-#ifdef CONFIG_CPU_S3C2412
-
-#define S3C2412_DMAREQSEL_SRC(x)	((x)<<1)
-
-#define S3C2412_DMAREQSEL_HW		(1)
-
-#define S3C2412_DMAREQSEL_SPI0TX	S3C2412_DMAREQSEL_SRC(0)
-#define S3C2412_DMAREQSEL_SPI0RX	S3C2412_DMAREQSEL_SRC(1)
-#define S3C2412_DMAREQSEL_SPI1TX	S3C2412_DMAREQSEL_SRC(2)
-#define S3C2412_DMAREQSEL_SPI1RX	S3C2412_DMAREQSEL_SRC(3)
-#define S3C2412_DMAREQSEL_I2STX		S3C2412_DMAREQSEL_SRC(4)
-#define S3C2412_DMAREQSEL_I2SRX		S3C2412_DMAREQSEL_SRC(5)
-#define S3C2412_DMAREQSEL_TIMER		S3C2412_DMAREQSEL_SRC(9)
-#define S3C2412_DMAREQSEL_SDI		S3C2412_DMAREQSEL_SRC(10)
-#define S3C2412_DMAREQSEL_USBEP1	S3C2412_DMAREQSEL_SRC(13)
-#define S3C2412_DMAREQSEL_USBEP2	S3C2412_DMAREQSEL_SRC(14)
-#define S3C2412_DMAREQSEL_USBEP3	S3C2412_DMAREQSEL_SRC(15)
-#define S3C2412_DMAREQSEL_USBEP4	S3C2412_DMAREQSEL_SRC(16)
-#define S3C2412_DMAREQSEL_XDREQ0	S3C2412_DMAREQSEL_SRC(17)
-#define S3C2412_DMAREQSEL_XDREQ1	S3C2412_DMAREQSEL_SRC(18)
-#define S3C2412_DMAREQSEL_UART0_0	S3C2412_DMAREQSEL_SRC(19)
-#define S3C2412_DMAREQSEL_UART0_1	S3C2412_DMAREQSEL_SRC(20)
-#define S3C2412_DMAREQSEL_UART1_0	S3C2412_DMAREQSEL_SRC(21)
-#define S3C2412_DMAREQSEL_UART1_1	S3C2412_DMAREQSEL_SRC(22)
-#define S3C2412_DMAREQSEL_UART2_0	S3C2412_DMAREQSEL_SRC(23)
-#define S3C2412_DMAREQSEL_UART2_1	S3C2412_DMAREQSEL_SRC(24)
-
-#endif
-
-#define S3C2443_DMAREQSEL_SRC(x)	((x)<<1)
-
-#define S3C2443_DMAREQSEL_HW		(1)
-
-#define S3C2443_DMAREQSEL_SPI0TX	S3C2443_DMAREQSEL_SRC(0)
-#define S3C2443_DMAREQSEL_SPI0RX	S3C2443_DMAREQSEL_SRC(1)
-#define S3C2443_DMAREQSEL_SPI1TX	S3C2443_DMAREQSEL_SRC(2)
-#define S3C2443_DMAREQSEL_SPI1RX	S3C2443_DMAREQSEL_SRC(3)
-#define S3C2443_DMAREQSEL_I2STX		S3C2443_DMAREQSEL_SRC(4)
-#define S3C2443_DMAREQSEL_I2SRX		S3C2443_DMAREQSEL_SRC(5)
-#define S3C2443_DMAREQSEL_TIMER		S3C2443_DMAREQSEL_SRC(9)
-#define S3C2443_DMAREQSEL_SDI		S3C2443_DMAREQSEL_SRC(10)
-#define S3C2443_DMAREQSEL_XDREQ0	S3C2443_DMAREQSEL_SRC(17)
-#define S3C2443_DMAREQSEL_XDREQ1	S3C2443_DMAREQSEL_SRC(18)
-#define S3C2443_DMAREQSEL_UART0_0	S3C2443_DMAREQSEL_SRC(19)
-#define S3C2443_DMAREQSEL_UART0_1	S3C2443_DMAREQSEL_SRC(20)
-#define S3C2443_DMAREQSEL_UART1_0	S3C2443_DMAREQSEL_SRC(21)
-#define S3C2443_DMAREQSEL_UART1_1	S3C2443_DMAREQSEL_SRC(22)
-#define S3C2443_DMAREQSEL_UART2_0	S3C2443_DMAREQSEL_SRC(23)
-#define S3C2443_DMAREQSEL_UART2_1	S3C2443_DMAREQSEL_SRC(24)
-#define S3C2443_DMAREQSEL_UART3_0	S3C2443_DMAREQSEL_SRC(25)
-#define S3C2443_DMAREQSEL_UART3_1	S3C2443_DMAREQSEL_SRC(26)
-#define S3C2443_DMAREQSEL_PCMOUT	S3C2443_DMAREQSEL_SRC(27)
-#define S3C2443_DMAREQSEL_PCMIN 	S3C2443_DMAREQSEL_SRC(28)
-#define S3C2443_DMAREQSEL_MICIN		S3C2443_DMAREQSEL_SRC(29)
diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-iis.h b/arch/arm/plat-s3c24xx/include/plat/regs-iis.h
deleted file mode 100644
index cc44e0e931e..00000000000
--- a/arch/arm/plat-s3c24xx/include/plat/regs-iis.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-iis.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 IIS register definition
-*/
-
-#ifndef __ASM_ARCH_REGS_IIS_H
-#define __ASM_ARCH_REGS_IIS_H
-
-#define S3C2410_IISCON	 (0x00)
-
-#define S3C2410_IISCON_LRINDEX	  (1<<8)
-#define S3C2410_IISCON_TXFIFORDY  (1<<7)
-#define S3C2410_IISCON_RXFIFORDY  (1<<6)
-#define S3C2410_IISCON_TXDMAEN	  (1<<5)
-#define S3C2410_IISCON_RXDMAEN	  (1<<4)
-#define S3C2410_IISCON_TXIDLE	  (1<<3)
-#define S3C2410_IISCON_RXIDLE	  (1<<2)
-#define S3C2410_IISCON_PSCEN	  (1<<1)
-#define S3C2410_IISCON_IISEN	  (1<<0)
-
-#define S3C2410_IISMOD	 (0x04)
-
-#define S3C2440_IISMOD_MPLL	  (1<<9)
-#define S3C2410_IISMOD_SLAVE	  (1<<8)
-#define S3C2410_IISMOD_NOXFER	  (0<<6)
-#define S3C2410_IISMOD_RXMODE	  (1<<6)
-#define S3C2410_IISMOD_TXMODE	  (2<<6)
-#define S3C2410_IISMOD_TXRXMODE	  (3<<6)
-#define S3C2410_IISMOD_LR_LLOW	  (0<<5)
-#define S3C2410_IISMOD_LR_RLOW	  (1<<5)
-#define S3C2410_IISMOD_IIS	  (0<<4)
-#define S3C2410_IISMOD_MSB	  (1<<4)
-#define S3C2410_IISMOD_8BIT	  (0<<3)
-#define S3C2410_IISMOD_16BIT	  (1<<3)
-#define S3C2410_IISMOD_BITMASK	  (1<<3)
-#define S3C2410_IISMOD_256FS	  (0<<2)
-#define S3C2410_IISMOD_384FS	  (1<<2)
-#define S3C2410_IISMOD_16FS	  (0<<0)
-#define S3C2410_IISMOD_32FS	  (1<<0)
-#define S3C2410_IISMOD_48FS	  (2<<0)
-#define S3C2410_IISMOD_FS_MASK	  (3<<0)
-
-#define S3C2410_IISPSR		(0x08)
-#define S3C2410_IISPSR_INTMASK	(31<<5)
-#define S3C2410_IISPSR_INTSHIFT	(5)
-#define S3C2410_IISPSR_EXTMASK	(31<<0)
-#define S3C2410_IISPSR_EXTSHFIT	(0)
-
-#define S3C2410_IISFCON  (0x0c)
-
-#define S3C2410_IISFCON_TXDMA	  (1<<15)
-#define S3C2410_IISFCON_RXDMA	  (1<<14)
-#define S3C2410_IISFCON_TXENABLE  (1<<13)
-#define S3C2410_IISFCON_RXENABLE  (1<<12)
-#define S3C2410_IISFCON_TXMASK	  (0x3f << 6)
-#define S3C2410_IISFCON_TXSHIFT	  (6)
-#define S3C2410_IISFCON_RXMASK	  (0x3f)
-#define S3C2410_IISFCON_RXSHIFT	  (0)
-
-#define S3C2410_IISFIFO  (0x10)
-#endif /* __ASM_ARCH_REGS_IIS_H */
diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-spi.h b/arch/arm/plat-s3c24xx/include/plat/regs-spi.h
deleted file mode 100644
index 892e2f680fc..00000000000
--- a/arch/arm/plat-s3c24xx/include/plat/regs-spi.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-spi.h
- *
- * Copyright (c) 2004 Fetron GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 SPI register definition
-*/
-
-#ifndef __ASM_ARCH_REGS_SPI_H
-#define __ASM_ARCH_REGS_SPI_H
-
-#define S3C2410_SPI1	(0x20)
-#define S3C2412_SPI1	(0x100)
-
-#define S3C2410_SPCON	(0x00)
-
-#define S3C2412_SPCON_RXFIFO_RB2	(0<<14)
-#define S3C2412_SPCON_RXFIFO_RB4	(1<<14)
-#define S3C2412_SPCON_RXFIFO_RB12	(2<<14)
-#define S3C2412_SPCON_RXFIFO_RB14	(3<<14)
-#define S3C2412_SPCON_TXFIFO_RB2	(0<<12)
-#define S3C2412_SPCON_TXFIFO_RB4	(1<<12)
-#define S3C2412_SPCON_TXFIFO_RB12	(2<<12)
-#define S3C2412_SPCON_TXFIFO_RB14	(3<<12)
-#define S3C2412_SPCON_RXFIFO_RESET	(1<<11) /* RxFIFO reset */
-#define S3C2412_SPCON_TXFIFO_RESET	(1<<10) /* TxFIFO reset */
-#define S3C2412_SPCON_RXFIFO_EN		(1<<9)  /* RxFIFO Enable */
-#define S3C2412_SPCON_TXFIFO_EN		(1<<8)  /* TxFIFO Enable */
-
-#define S3C2412_SPCON_DIRC_RX	  (1<<7)
-
-#define S3C2410_SPCON_SMOD_DMA	  (2<<5)	/* DMA mode */
-#define S3C2410_SPCON_SMOD_INT	  (1<<5)	/* interrupt mode */
-#define S3C2410_SPCON_SMOD_POLL   (0<<5)	/* polling mode */
-#define S3C2410_SPCON_ENSCK	  (1<<4)	/* Enable SCK */
-#define S3C2410_SPCON_MSTR	  (1<<3)	/* Master/Slave select
-						   0: slave, 1: master */
-#define S3C2410_SPCON_CPOL_HIGH	  (1<<2)	/* Clock polarity select */
-#define S3C2410_SPCON_CPOL_LOW	  (0<<2)	/* Clock polarity select */
-
-#define S3C2410_SPCON_CPHA_FMTB	  (1<<1)	/* Clock Phase Select */
-#define S3C2410_SPCON_CPHA_FMTA	  (0<<1)	/* Clock Phase Select */
-
-#define S3C2410_SPCON_TAGD	  (1<<0)	/* Tx auto garbage data mode */
-
-
-#define S3C2410_SPSTA	 (0x04)
-
-#define S3C2412_SPSTA_RXFIFO_AE		(1<<11)
-#define S3C2412_SPSTA_TXFIFO_AE		(1<<10)
-#define S3C2412_SPSTA_RXFIFO_ERROR	(1<<9)
-#define S3C2412_SPSTA_TXFIFO_ERROR	(1<<8)
-#define S3C2412_SPSTA_RXFIFO_FIFO	(1<<7)
-#define S3C2412_SPSTA_RXFIFO_EMPTY	(1<<6)
-#define S3C2412_SPSTA_TXFIFO_NFULL	(1<<5)
-#define S3C2412_SPSTA_TXFIFO_EMPTY	(1<<4)
-
-#define S3C2410_SPSTA_DCOL	  (1<<2)	/* Data Collision Error */
-#define S3C2410_SPSTA_MULD	  (1<<1)	/* Multi Master Error */
-#define S3C2410_SPSTA_READY	  (1<<0)	/* Data Tx/Rx ready */
-#define S3C2412_SPSTA_READY_ORG	  (1<<3)
-
-#define S3C2410_SPPIN	 (0x08)
-
-#define S3C2410_SPPIN_ENMUL	  (1<<2)	/* Multi Master Error detect */
-#define S3C2410_SPPIN_RESERVED	  (1<<1)
-#define S3C2410_SPPIN_KEEP	  (1<<0)	/* Master Out keep */
-
-#define S3C2410_SPPRE	 (0x0C)
-#define S3C2410_SPTDAT	 (0x10)
-#define S3C2410_SPRDAT	 (0x14)
-
-#define S3C2412_TXFIFO	 (0x18)
-#define S3C2412_RXFIFO	 (0x18)
-#define S3C2412_SPFIC	 (0x24)
-
-
-#endif /* __ASM_ARCH_REGS_SPI_H */
diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-udc.h b/arch/arm/plat-s3c24xx/include/plat/regs-udc.h
deleted file mode 100644
index f0dd4a41b37..00000000000
--- a/arch/arm/plat-s3c24xx/include/plat/regs-udc.h
+++ /dev/null
@@ -1,153 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-udc.h
- *
- * Copyright (C) 2004 Herbert Poetzl <herbert@13thfloor.at>
- *
- * This include file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
-*/
-
-#ifndef __ASM_ARCH_REGS_UDC_H
-#define __ASM_ARCH_REGS_UDC_H
-
-#define S3C2410_USBDREG(x) (x)
-
-#define S3C2410_UDC_FUNC_ADDR_REG	S3C2410_USBDREG(0x0140)
-#define S3C2410_UDC_PWR_REG		S3C2410_USBDREG(0x0144)
-#define S3C2410_UDC_EP_INT_REG		S3C2410_USBDREG(0x0148)
-
-#define S3C2410_UDC_USB_INT_REG		S3C2410_USBDREG(0x0158)
-#define S3C2410_UDC_EP_INT_EN_REG	S3C2410_USBDREG(0x015c)
-
-#define S3C2410_UDC_USB_INT_EN_REG	S3C2410_USBDREG(0x016c)
-
-#define S3C2410_UDC_FRAME_NUM1_REG	S3C2410_USBDREG(0x0170)
-#define S3C2410_UDC_FRAME_NUM2_REG	S3C2410_USBDREG(0x0174)
-
-#define S3C2410_UDC_EP0_FIFO_REG	S3C2410_USBDREG(0x01c0)
-#define S3C2410_UDC_EP1_FIFO_REG	S3C2410_USBDREG(0x01c4)
-#define S3C2410_UDC_EP2_FIFO_REG	S3C2410_USBDREG(0x01c8)
-#define S3C2410_UDC_EP3_FIFO_REG	S3C2410_USBDREG(0x01cc)
-#define S3C2410_UDC_EP4_FIFO_REG	S3C2410_USBDREG(0x01d0)
-
-#define S3C2410_UDC_EP1_DMA_CON		S3C2410_USBDREG(0x0200)
-#define S3C2410_UDC_EP1_DMA_UNIT	S3C2410_USBDREG(0x0204)
-#define S3C2410_UDC_EP1_DMA_FIFO	S3C2410_USBDREG(0x0208)
-#define S3C2410_UDC_EP1_DMA_TTC_L	S3C2410_USBDREG(0x020c)
-#define S3C2410_UDC_EP1_DMA_TTC_M	S3C2410_USBDREG(0x0210)
-#define S3C2410_UDC_EP1_DMA_TTC_H	S3C2410_USBDREG(0x0214)
-
-#define S3C2410_UDC_EP2_DMA_CON		S3C2410_USBDREG(0x0218)
-#define S3C2410_UDC_EP2_DMA_UNIT	S3C2410_USBDREG(0x021c)
-#define S3C2410_UDC_EP2_DMA_FIFO	S3C2410_USBDREG(0x0220)
-#define S3C2410_UDC_EP2_DMA_TTC_L	S3C2410_USBDREG(0x0224)
-#define S3C2410_UDC_EP2_DMA_TTC_M	S3C2410_USBDREG(0x0228)
-#define S3C2410_UDC_EP2_DMA_TTC_H	S3C2410_USBDREG(0x022c)
-
-#define S3C2410_UDC_EP3_DMA_CON		S3C2410_USBDREG(0x0240)
-#define S3C2410_UDC_EP3_DMA_UNIT	S3C2410_USBDREG(0x0244)
-#define S3C2410_UDC_EP3_DMA_FIFO	S3C2410_USBDREG(0x0248)
-#define S3C2410_UDC_EP3_DMA_TTC_L	S3C2410_USBDREG(0x024c)
-#define S3C2410_UDC_EP3_DMA_TTC_M	S3C2410_USBDREG(0x0250)
-#define S3C2410_UDC_EP3_DMA_TTC_H	S3C2410_USBDREG(0x0254)
-
-#define S3C2410_UDC_EP4_DMA_CON		S3C2410_USBDREG(0x0258)
-#define S3C2410_UDC_EP4_DMA_UNIT	S3C2410_USBDREG(0x025c)
-#define S3C2410_UDC_EP4_DMA_FIFO	S3C2410_USBDREG(0x0260)
-#define S3C2410_UDC_EP4_DMA_TTC_L	S3C2410_USBDREG(0x0264)
-#define S3C2410_UDC_EP4_DMA_TTC_M	S3C2410_USBDREG(0x0268)
-#define S3C2410_UDC_EP4_DMA_TTC_H	S3C2410_USBDREG(0x026c)
-
-#define S3C2410_UDC_INDEX_REG		S3C2410_USBDREG(0x0178)
-
-/* indexed registers */
-
-#define S3C2410_UDC_MAXP_REG		S3C2410_USBDREG(0x0180)
-
-#define S3C2410_UDC_EP0_CSR_REG		S3C2410_USBDREG(0x0184)
-
-#define S3C2410_UDC_IN_CSR1_REG		S3C2410_USBDREG(0x0184)
-#define S3C2410_UDC_IN_CSR2_REG		S3C2410_USBDREG(0x0188)
-
-#define S3C2410_UDC_OUT_CSR1_REG	S3C2410_USBDREG(0x0190)
-#define S3C2410_UDC_OUT_CSR2_REG	S3C2410_USBDREG(0x0194)
-#define S3C2410_UDC_OUT_FIFO_CNT1_REG	S3C2410_USBDREG(0x0198)
-#define S3C2410_UDC_OUT_FIFO_CNT2_REG	S3C2410_USBDREG(0x019c)
-
-#define S3C2410_UDC_FUNCADDR_UPDATE	(1<<7)
-
-#define S3C2410_UDC_PWR_ISOUP		(1<<7) // R/W
-#define S3C2410_UDC_PWR_RESET		(1<<3) // R
-#define S3C2410_UDC_PWR_RESUME		(1<<2) // R/W
-#define S3C2410_UDC_PWR_SUSPEND		(1<<1) // R
-#define S3C2410_UDC_PWR_ENSUSPEND	(1<<0) // R/W
-
-#define S3C2410_UDC_PWR_DEFAULT		0x00
-
-#define S3C2410_UDC_INT_EP4		(1<<4) // R/W (clear only)
-#define S3C2410_UDC_INT_EP3		(1<<3) // R/W (clear only)
-#define S3C2410_UDC_INT_EP2		(1<<2) // R/W (clear only)
-#define S3C2410_UDC_INT_EP1		(1<<1) // R/W (clear only)
-#define S3C2410_UDC_INT_EP0		(1<<0) // R/W (clear only)
-
-#define S3C2410_UDC_USBINT_RESET	(1<<2) // R/W (clear only)
-#define S3C2410_UDC_USBINT_RESUME	(1<<1) // R/W (clear only)
-#define S3C2410_UDC_USBINT_SUSPEND	(1<<0) // R/W (clear only)
-
-#define S3C2410_UDC_INTE_EP4		(1<<4) // R/W
-#define S3C2410_UDC_INTE_EP3		(1<<3) // R/W
-#define S3C2410_UDC_INTE_EP2		(1<<2) // R/W
-#define S3C2410_UDC_INTE_EP1		(1<<1) // R/W
-#define S3C2410_UDC_INTE_EP0		(1<<0) // R/W
-
-#define S3C2410_UDC_USBINTE_RESET	(1<<2) // R/W
-#define S3C2410_UDC_USBINTE_SUSPEND	(1<<0) // R/W
-
-
-#define S3C2410_UDC_INDEX_EP0		(0x00)
-#define S3C2410_UDC_INDEX_EP1		(0x01) // ??
-#define S3C2410_UDC_INDEX_EP2		(0x02) // ??
-#define S3C2410_UDC_INDEX_EP3		(0x03) // ??
-#define S3C2410_UDC_INDEX_EP4		(0x04) // ??
-
-#define S3C2410_UDC_ICSR1_CLRDT		(1<<6) // R/W
-#define S3C2410_UDC_ICSR1_SENTSTL	(1<<5) // R/W (clear only)
-#define S3C2410_UDC_ICSR1_SENDSTL	(1<<4) // R/W
-#define S3C2410_UDC_ICSR1_FFLUSH	(1<<3) // W   (set only)
-#define S3C2410_UDC_ICSR1_UNDRUN	(1<<2) // R/W (clear only)
-#define S3C2410_UDC_ICSR1_PKTRDY	(1<<0) // R/W (set only)
-
-#define S3C2410_UDC_ICSR2_AUTOSET	(1<<7) // R/W
-#define S3C2410_UDC_ICSR2_ISO		(1<<6) // R/W
-#define S3C2410_UDC_ICSR2_MODEIN	(1<<5) // R/W
-#define S3C2410_UDC_ICSR2_DMAIEN	(1<<4) // R/W
-
-#define S3C2410_UDC_OCSR1_CLRDT		(1<<7) // R/W
-#define S3C2410_UDC_OCSR1_SENTSTL	(1<<6) // R/W (clear only)
-#define S3C2410_UDC_OCSR1_SENDSTL	(1<<5) // R/W
-#define S3C2410_UDC_OCSR1_FFLUSH	(1<<4) // R/W
-#define S3C2410_UDC_OCSR1_DERROR	(1<<3) // R
-#define S3C2410_UDC_OCSR1_OVRRUN	(1<<2) // R/W (clear only)
-#define S3C2410_UDC_OCSR1_PKTRDY	(1<<0) // R/W (clear only)
-
-#define S3C2410_UDC_OCSR2_AUTOCLR	(1<<7) // R/W
-#define S3C2410_UDC_OCSR2_ISO		(1<<6) // R/W
-#define S3C2410_UDC_OCSR2_DMAIEN	(1<<5) // R/W
-
-#define S3C2410_UDC_EP0_CSR_OPKRDY	(1<<0)
-#define S3C2410_UDC_EP0_CSR_IPKRDY	(1<<1)
-#define S3C2410_UDC_EP0_CSR_SENTSTL	(1<<2)
-#define S3C2410_UDC_EP0_CSR_DE		(1<<3)
-#define S3C2410_UDC_EP0_CSR_SE		(1<<4)
-#define S3C2410_UDC_EP0_CSR_SENDSTL	(1<<5)
-#define S3C2410_UDC_EP0_CSR_SOPKTRDY	(1<<6)
-#define S3C2410_UDC_EP0_CSR_SSE	(1<<7)
-
-#define S3C2410_UDC_MAXP_8		(1<<0)
-#define S3C2410_UDC_MAXP_16		(1<<1)
-#define S3C2410_UDC_MAXP_32		(1<<2)
-#define S3C2410_UDC_MAXP_64		(1<<3)
-
-
-#endif
diff --git a/arch/arm/plat-s3c24xx/include/plat/udc.h b/arch/arm/plat-s3c24xx/include/plat/udc.h
deleted file mode 100644
index f6388424250..00000000000
--- a/arch/arm/plat-s3c24xx/include/plat/udc.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/udc.h
- *
- * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *
- *  Changelog:
- *	14-Mar-2005	RTP	Created file
- *	02-Aug-2005	RTP	File rename
- *	07-Sep-2005	BJD	Minor cleanups, changed cmd to enum
- *	18-Jan-2007	HMW	Add per-platform vbus_draw function
-*/
-
-#ifndef __ASM_ARM_ARCH_UDC_H
-#define __ASM_ARM_ARCH_UDC_H
-
-enum s3c2410_udc_cmd_e {
-	S3C2410_UDC_P_ENABLE	= 1,	/* Pull-up enable        */
-	S3C2410_UDC_P_DISABLE	= 2,	/* Pull-up disable       */
-	S3C2410_UDC_P_RESET	= 3,	/* UDC reset, in case of */
-};
-
-struct s3c2410_udc_mach_info {
-	void	(*udc_command)(enum s3c2410_udc_cmd_e);
- 	void	(*vbus_draw)(unsigned int ma);
-
-	unsigned int pullup_pin;
-	unsigned int pullup_pin_inverted;
-
-	unsigned int vbus_pin;
-	unsigned char vbus_pin_inverted;
-};
-
-extern void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *);
-
-/**
- * s3c24xx_hsudc_platdata - Platform data for USB High-Speed gadget controller.
- * @epnum: Number of endpoints to be instantiated by the controller driver.
- * @gpio_init: Platform specific USB related GPIO initialization.
- * @gpio_uninit: Platform specific USB releted GPIO uninitialzation.
- *
- * Representation of platform data for the S3C24XX USB 2.0 High Speed gadget
- * controllers.
- */
-struct s3c24xx_hsudc_platdata {
-	unsigned int	epnum;
-	void		(*gpio_init)(void);
-	void		(*gpio_uninit)(void);
-};
-
-extern void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd);
-
-#endif /* __ASM_ARM_ARCH_UDC_H */
diff --git a/arch/arm/plat-samsung/include/plat/audio-simtec.h b/arch/arm/plat-samsung/include/plat/audio-simtec.h
new file mode 100644
index 00000000000..5345364e742
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/audio-simtec.h
@@ -0,0 +1,37 @@
+/* arch/arm/plat-samsung/include/plat/audio-simtec.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Simtec Audio support.
+*/
+
+/**
+ * struct s3c24xx_audio_simtec_pdata - platform data for simtec audio
+ * @use_mpllin: Select codec clock from MPLLin
+ * @output_cdclk: Need to output CDCLK to the codec
+ * @have_mic: Set if we have a MIC socket
+ * @have_lout: Set if we have a LineOut socket
+ * @amp_gpio: GPIO pin to enable the AMP
+ * @amp_gain: Option GPIO to control AMP gain
+ */
+struct s3c24xx_audio_simtec_pdata {
+	unsigned int	use_mpllin:1;
+	unsigned int	output_cdclk:1;
+
+	unsigned int	have_mic:1;
+	unsigned int	have_lout:1;
+
+	int		amp_gpio;
+	int		amp_gain[2];
+
+	void	(*startup)(void);
+};
+
+extern int simtec_audio_add(const char *codec_name, bool has_lr_routing,
+			    struct s3c24xx_audio_simtec_pdata *pdata);
diff --git a/arch/arm/plat-samsung/include/plat/common-smdk.h b/arch/arm/plat-samsung/include/plat/common-smdk.h
new file mode 100644
index 00000000000..ba028f1ed30
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/common-smdk.h
@@ -0,0 +1,15 @@
+/* linux/arch/arm/plat-samsung/include/plat/common-smdk.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Common code for SMDK2410 and SMDK2440 boards
+ *
+ * http://www.fluff.org/ben/smdk2440/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern void smdk_machine_init(void);
diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
new file mode 100644
index 00000000000..dac4760c0f0
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
@@ -0,0 +1,288 @@
+/* arch/arm/plat-samsung/include/plat/cpu-freq-core.h
+ *
+ * Copyright (c) 2006-2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C CPU frequency scaling support - core support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/cpu-freq.h>
+
+struct seq_file;
+
+#define MAX_BANKS (8)
+#define S3C2412_MAX_IO	(8)
+
+/**
+ * struct s3c2410_iobank_timing - IO bank timings for S3C2410 style timings
+ * @bankcon: The cached version of settings in this structure.
+ * @tacp:
+ * @tacs: Time from address valid to nCS asserted.
+ * @tcos: Time from nCS asserted to nOE or nWE asserted.
+ * @tacc: Time that nOE or nWE is asserted.
+ * @tcoh: Time nCS is held after nOE or nWE are released.
+ * @tcah: Time address is held for after
+ * @nwait_en: Whether nWAIT is enabled for this bank.
+ *
+ * This structure represents the IO timings for a S3C2410 style IO bank
+ * used by the CPU frequency support if it needs to change the settings
+ * of the IO.
+ */
+struct s3c2410_iobank_timing {
+	unsigned long	bankcon;
+	unsigned int	tacp;
+	unsigned int	tacs;
+	unsigned int	tcos;
+	unsigned int	tacc;
+	unsigned int	tcoh;		/* nCS hold afrer nOE/nWE */
+	unsigned int	tcah;		/* Address hold after nCS */
+	unsigned char	nwait_en;	/* nWait enabled for bank. */
+};
+
+/**
+ * struct s3c2412_iobank_timing - io timings for PL092 (S3C2412) style IO
+ * @idcy: The idle cycle time between transactions.
+ * @wstrd: nCS release to end of read cycle.
+ * @wstwr: nCS release to end of write cycle.
+ * @wstoen: nCS assertion to nOE assertion time.
+ * @wstwen: nCS assertion to nWE assertion time.
+ * @wstbrd: Burst ready delay.
+ * @smbidcyr: Register cache for smbidcyr value.
+ * @smbwstrd: Register cache for smbwstrd value.
+ * @smbwstwr: Register cache for smbwstwr value.
+ * @smbwstoen: Register cache for smbwstoen value.
+ * @smbwstwen: Register cache for smbwstwen value.
+ * @smbwstbrd: Register cache for smbwstbrd value.
+ *
+ * Timing information for a IO bank on an S3C2412 or similar system which
+ * uses a PL093 block.
+ */
+struct s3c2412_iobank_timing {
+	unsigned int	idcy;
+	unsigned int	wstrd;
+	unsigned int	wstwr;
+	unsigned int	wstoen;
+	unsigned int	wstwen;
+	unsigned int	wstbrd;
+
+	/* register cache */
+	unsigned char	smbidcyr;
+	unsigned char	smbwstrd;
+	unsigned char	smbwstwr;
+	unsigned char	smbwstoen;
+	unsigned char	smbwstwen;
+	unsigned char	smbwstbrd;
+};
+
+union s3c_iobank {
+	struct s3c2410_iobank_timing	*io_2410;
+	struct s3c2412_iobank_timing	*io_2412;
+};
+
+/**
+ * struct s3c_iotimings - Chip IO timings holder
+ * @bank: The timings for each IO bank.
+ */
+struct s3c_iotimings {
+	union s3c_iobank	bank[MAX_BANKS];
+};
+
+/**
+ * struct s3c_plltab - PLL table information.
+ * @vals: List of PLL values.
+ * @size: Size of the PLL table @vals.
+ */
+struct s3c_plltab {
+	struct s3c_pllval	*vals;
+	int			 size;
+};
+
+/**
+ * struct s3c_cpufreq_config - current cpu frequency configuration
+ * @freq: The current settings for the core clocks.
+ * @max: Maxium settings, derived from core, board and user settings.
+ * @pll: The PLL table entry for the current PLL settings.
+ * @divs: The divisor settings for the core clocks.
+ * @info: The current core driver information.
+ * @board: The information for the board we are running on.
+ * @lock_pll: Set if the PLL settings cannot be changed.
+ *
+ * This is for the core drivers that need to know information about
+ * the current settings and values. It should not be needed by any
+ * device drivers.
+*/
+struct s3c_cpufreq_config {
+	struct s3c_freq		freq;
+	struct s3c_freq		max;
+	struct cpufreq_frequency_table pll;
+	struct s3c_clkdivs	divs;
+	struct s3c_cpufreq_info *info;	/* for core, not drivers */
+	struct s3c_cpufreq_board *board;
+
+	unsigned int	lock_pll:1;
+};
+
+/**
+ * struct s3c_cpufreq_info - Information for the CPU frequency driver.
+ * @name: The name of this implementation.
+ * @max: The maximum frequencies for the system.
+ * @latency: Transition latency to give to cpufreq.
+ * @locktime_m: The lock-time in uS for the MPLL.
+ * @locktime_u: The lock-time in uS for the UPLL.
+ * @locttime_bits: The number of bits each LOCKTIME field.
+ * @need_pll: Set if this driver needs to change the PLL values to achieve
+ *	any frequency changes. This is really only need by devices like the
+ *	S3C2410 where there is no or limited divider between the PLL and the
+ *	ARMCLK.
+ * @resume_clocks: Update the clocks on resume.
+ * @get_iotiming: Get the current IO timing data, mainly for use at start.
+ * @set_iotiming: Update the IO timings from the cached copies calculated
+ *	from the @calc_iotiming entry when changing the frequency.
+ * @calc_iotiming: Calculate and update the cached copies of the IO timings
+ *	from the newly calculated frequencies.
+ * @calc_freqtable: Calculate (fill in) the given frequency table from the
+ *	current frequency configuration. If the table passed in is NULL,
+ *	then the return is the number of elements to be filled for allocation
+ *	of the table.
+ * @set_refresh: Set the memory refresh configuration.
+ * @set_fvco: Set the PLL frequencies.
+ * @set_divs: Update the clock divisors.
+ * @calc_divs: Calculate the clock divisors.
+ */
+struct s3c_cpufreq_info {
+	const char		*name;
+	struct s3c_freq		max;
+
+	unsigned int		latency;
+
+	unsigned int		locktime_m;
+	unsigned int		locktime_u;
+	unsigned char		locktime_bits;
+
+	unsigned int		need_pll:1;
+
+	/* driver routines */
+
+	void		(*resume_clocks)(void);
+
+	int		(*get_iotiming)(struct s3c_cpufreq_config *cfg,
+					struct s3c_iotimings *timings);
+
+	void		(*set_iotiming)(struct s3c_cpufreq_config *cfg,
+					struct s3c_iotimings *timings);
+
+	int		(*calc_iotiming)(struct s3c_cpufreq_config *cfg,
+					 struct s3c_iotimings *timings);
+
+	int		(*calc_freqtable)(struct s3c_cpufreq_config *cfg,
+					  struct cpufreq_frequency_table *t,
+					  size_t table_size);
+
+	void		(*debug_io_show)(struct seq_file *seq,
+					 struct s3c_cpufreq_config *cfg,
+					 union s3c_iobank *iob);
+
+	void		(*set_refresh)(struct s3c_cpufreq_config *cfg);
+	void		(*set_fvco)(struct s3c_cpufreq_config *cfg);
+	void		(*set_divs)(struct s3c_cpufreq_config *cfg);
+	int		(*calc_divs)(struct s3c_cpufreq_config *cfg);
+};
+
+extern int s3c_cpufreq_register(struct s3c_cpufreq_info *info);
+
+extern int s3c_plltab_register(struct cpufreq_frequency_table *plls,
+			       unsigned int plls_no);
+
+/* exports and utilities for debugfs */
+extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void);
+extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void);
+
+extern void s3c2410_iotiming_debugfs(struct seq_file *seq,
+				     struct s3c_cpufreq_config *cfg,
+				     union s3c_iobank *iob);
+
+extern void s3c2412_iotiming_debugfs(struct seq_file *seq,
+				     struct s3c_cpufreq_config *cfg,
+				     union s3c_iobank *iob);
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
+#define s3c_cpufreq_debugfs_call(x) x
+#else
+#define s3c_cpufreq_debugfs_call(x) NULL
+#endif
+
+/* Useful utility functions. */
+
+extern struct clk *s3c_cpufreq_clk_get(struct device *, const char *);
+
+/* S3C2410 and compatible exported functions */
+
+extern void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg);
+extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg);
+
+#ifdef CONFIG_S3C2410_IOTIMING
+extern int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
+				 struct s3c_iotimings *iot);
+
+extern int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
+				struct s3c_iotimings *timings);
+
+extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
+				 struct s3c_iotimings *iot);
+#else
+#define s3c2410_iotiming_calc NULL
+#define s3c2410_iotiming_get NULL
+#define s3c2410_iotiming_set NULL
+#endif /* CONFIG_S3C2410_IOTIMING */
+
+/* S3C2412 compatible routines */
+
+extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+				struct s3c_iotimings *timings);
+
+extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+				struct s3c_iotimings *timings);
+
+extern int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
+				 struct s3c_iotimings *iot);
+
+extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
+				 struct s3c_iotimings *iot);
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG
+#define s3c_freq_dbg(x...) printk(KERN_INFO x)
+#else
+#define s3c_freq_dbg(x...) do { if (0) printk(x); } while (0)
+#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUG */
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_IODEBUG
+#define s3c_freq_iodbg(x...) printk(KERN_INFO x)
+#else
+#define s3c_freq_iodbg(x...) do { if (0) printk(x); } while (0)
+#endif /* CONFIG_CPU_FREQ_S3C24XX_IODEBUG */
+
+static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table,
+				      int index, size_t table_size,
+				      unsigned int freq)
+{
+	if (index < 0)
+		return index;
+
+	if (table) {
+		if (index >= table_size)
+			return -ENOMEM;
+
+		s3c_freq_dbg("%s: { %d = %u kHz }\n",
+			     __func__, index, freq);
+
+		table[index].index = index;
+		table[index].frequency = freq;
+	}
+
+	return index + 1;
+}
diff --git a/arch/arm/plat-samsung/include/plat/fiq.h b/arch/arm/plat-samsung/include/plat/fiq.h
new file mode 100644
index 00000000000..535d06a3562
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/fiq.h
@@ -0,0 +1,13 @@
+/* linux/arch/arm/plat-samsung/include/plat/fiq.h
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C24XX CPU FIQ support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern int s3c24xx_set_fiq(unsigned int irq, bool on);
diff --git a/arch/arm/plat-samsung/include/plat/irq.h b/arch/arm/plat-samsung/include/plat/irq.h
new file mode 100644
index 00000000000..e21a89bc26c
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/irq.h
@@ -0,0 +1,116 @@
+/* linux/arch/arm/plat-samsung/include/plat/irq.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C24XX CPU IRQ support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
+
+#define irqdbf(x...)
+#define irqdbf2(x...)
+
+#define EXTINT_OFF (IRQ_EINT4 - 4)
+
+/* these are exported for arch/arm/mach-* usage */
+extern struct irq_chip s3c_irq_level_chip;
+extern struct irq_chip s3c_irq_chip;
+
+static inline void s3c_irqsub_mask(unsigned int irqno,
+				   unsigned int parentbit,
+				   int subcheck)
+{
+	unsigned long mask;
+	unsigned long submask;
+
+	submask = __raw_readl(S3C2410_INTSUBMSK);
+	mask = __raw_readl(S3C2410_INTMSK);
+
+	submask |= (1UL << (irqno - IRQ_S3CUART_RX0));
+
+	/* check to see if we need to mask the parent IRQ */
+
+	if ((submask  & subcheck) == subcheck)
+		__raw_writel(mask | parentbit, S3C2410_INTMSK);
+
+	/* write back masks */
+	__raw_writel(submask, S3C2410_INTSUBMSK);
+
+}
+
+static inline void s3c_irqsub_unmask(unsigned int irqno,
+				     unsigned int parentbit)
+{
+	unsigned long mask;
+	unsigned long submask;
+
+	submask = __raw_readl(S3C2410_INTSUBMSK);
+	mask = __raw_readl(S3C2410_INTMSK);
+
+	submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0));
+	mask &= ~parentbit;
+
+	/* write back masks */
+	__raw_writel(submask, S3C2410_INTSUBMSK);
+	__raw_writel(mask, S3C2410_INTMSK);
+}
+
+
+static inline void s3c_irqsub_maskack(unsigned int irqno,
+				      unsigned int parentmask,
+				      unsigned int group)
+{
+	unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
+
+	s3c_irqsub_mask(irqno, parentmask, group);
+
+	__raw_writel(bit, S3C2410_SUBSRCPND);
+
+	/* only ack parent if we've got all the irqs (seems we must
+	 * ack, all and hope that the irq system retriggers ok when
+	 * the interrupt goes off again)
+	 */
+
+	if (1) {
+		__raw_writel(parentmask, S3C2410_SRCPND);
+		__raw_writel(parentmask, S3C2410_INTPND);
+	}
+}
+
+static inline void s3c_irqsub_ack(unsigned int irqno,
+				  unsigned int parentmask,
+				  unsigned int group)
+{
+	unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
+
+	__raw_writel(bit, S3C2410_SUBSRCPND);
+
+	/* only ack parent if we've got all the irqs (seems we must
+	 * ack, all and hope that the irq system retriggers ok when
+	 * the interrupt goes off again)
+	 */
+
+	if (1) {
+		__raw_writel(parentmask, S3C2410_SRCPND);
+		__raw_writel(parentmask, S3C2410_INTPND);
+	}
+}
+
+/* exported for use in arch/arm/mach-s3c2410 */
+
+#ifdef CONFIG_PM
+extern int s3c_irq_wake(struct irq_data *data, unsigned int state);
+#else
+#define s3c_irq_wake NULL
+#endif
+
+extern int s3c_irqext_type(struct irq_data *d, unsigned int type);
diff --git a/arch/arm/plat-samsung/include/plat/mci.h b/arch/arm/plat-samsung/include/plat/mci.h
new file mode 100644
index 00000000000..c42d3171194
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/mci.h
@@ -0,0 +1,52 @@
+#ifndef _ARCH_MCI_H
+#define _ARCH_MCI_H
+
+/**
+ * struct s3c24xx_mci_pdata - sd/mmc controller platform data
+ * @no_wprotect: Set this to indicate there is no write-protect switch.
+ * @no_detect: Set this if there is no detect switch.
+ * @wprotect_invert: Invert the default sense of the write protect switch.
+ * @detect_invert: Invert the default sense of the write protect switch.
+ * @use_dma: Set to allow the use of DMA.
+ * @gpio_detect: GPIO number for the card detect line.
+ * @gpio_wprotect: GPIO number for the write protect line.
+ * @ocr_avail: The mask of the available power states, non-zero to use.
+ * @set_power: Callback to control the power mode.
+ *
+ * The @gpio_detect is used for card detection when @no_wprotect is unset,
+ * and the default sense is that 0 returned from gpio_get_value() means
+ * that a card is inserted. If @detect_invert is set, then the value from
+ * gpio_get_value() is inverted, which makes 1 mean card inserted.
+ *
+ * The driver will use @gpio_wprotect to signal whether the card is write
+ * protected if @no_wprotect is not set. A 0 returned from gpio_get_value()
+ * means the card is read/write, and 1 means read-only. The @wprotect_invert
+ * will invert the value returned from gpio_get_value().
+ *
+ * Card power is set by @ocr_availa, using MCC_VDD_ constants if it is set
+ * to a non-zero value, otherwise the default of 3.2-3.4V is used.
+ */
+struct s3c24xx_mci_pdata {
+	unsigned int	no_wprotect:1;
+	unsigned int	no_detect:1;
+	unsigned int	wprotect_invert:1;
+	unsigned int	detect_invert:1;	/* set => detect active high */
+	unsigned int	use_dma:1;
+
+	unsigned int	gpio_detect;
+	unsigned int	gpio_wprotect;
+	unsigned long	ocr_avail;
+	void		(*set_power)(unsigned char power_mode,
+				     unsigned short vdd);
+};
+
+/**
+ * s3c24xx_mci_set_platdata - set platform data for mmc/sdi device
+ * @pdata: The platform data
+ *
+ * Copy the platform data supplied by @pdata so that this can be marked
+ * __initdata.
+ */
+extern void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata);
+
+#endif /* _ARCH_NCI_H */
diff --git a/arch/arm/plat-samsung/include/plat/regs-dma.h b/arch/arm/plat-samsung/include/plat/regs-dma.h
new file mode 100644
index 00000000000..178bccbe480
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/regs-dma.h
@@ -0,0 +1,151 @@
+/* arch/arm/plat-samsung/include/plat/regs-dma.h
+ *
+ * Copyright (C) 2003-2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C24XX DMA support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_REGS_DMA_H
+#define __ASM_PLAT_REGS_DMA_H __FILE__
+
+#define S3C2410_DMA_DISRC		(0x00)
+#define S3C2410_DMA_DISRCC		(0x04)
+#define S3C2410_DMA_DIDST		(0x08)
+#define S3C2410_DMA_DIDSTC		(0x0C)
+#define S3C2410_DMA_DCON		(0x10)
+#define S3C2410_DMA_DSTAT		(0x14)
+#define S3C2410_DMA_DCSRC		(0x18)
+#define S3C2410_DMA_DCDST		(0x1C)
+#define S3C2410_DMA_DMASKTRIG		(0x20)
+#define S3C2412_DMA_DMAREQSEL		(0x24)
+#define S3C2443_DMA_DMAREQSEL		(0x24)
+
+#define S3C2410_DISRCC_INC		(1 << 0)
+#define S3C2410_DISRCC_APB		(1 << 1)
+
+#define S3C2410_DMASKTRIG_STOP		(1 << 2)
+#define S3C2410_DMASKTRIG_ON		(1 << 1)
+#define S3C2410_DMASKTRIG_SWTRIG	(1 << 0)
+
+#define S3C2410_DCON_DEMAND		(0 << 31)
+#define S3C2410_DCON_HANDSHAKE		(1 << 31)
+#define S3C2410_DCON_SYNC_PCLK		(0 << 30)
+#define S3C2410_DCON_SYNC_HCLK		(1 << 30)
+
+#define S3C2410_DCON_INTREQ		(1 << 29)
+
+#define S3C2410_DCON_CH0_XDREQ0		(0 << 24)
+#define S3C2410_DCON_CH0_UART0		(1 << 24)
+#define S3C2410_DCON_CH0_SDI		(2 << 24)
+#define S3C2410_DCON_CH0_TIMER		(3 << 24)
+#define S3C2410_DCON_CH0_USBEP1		(4 << 24)
+
+#define S3C2410_DCON_CH1_XDREQ1		(0 << 24)
+#define S3C2410_DCON_CH1_UART1		(1 << 24)
+#define S3C2410_DCON_CH1_I2SSDI		(2 << 24)
+#define S3C2410_DCON_CH1_SPI		(3 << 24)
+#define S3C2410_DCON_CH1_USBEP2		(4 << 24)
+
+#define S3C2410_DCON_CH2_I2SSDO		(0 << 24)
+#define S3C2410_DCON_CH2_I2SSDI		(1 << 24)
+#define S3C2410_DCON_CH2_SDI		(2 << 24)
+#define S3C2410_DCON_CH2_TIMER		(3 << 24)
+#define S3C2410_DCON_CH2_USBEP3		(4 << 24)
+
+#define S3C2410_DCON_CH3_UART2		(0 << 24)
+#define S3C2410_DCON_CH3_SDI		(1 << 24)
+#define S3C2410_DCON_CH3_SPI		(2 << 24)
+#define S3C2410_DCON_CH3_TIMER		(3 << 24)
+#define S3C2410_DCON_CH3_USBEP4		(4 << 24)
+
+#define S3C2410_DCON_SRCSHIFT		(24)
+#define S3C2410_DCON_SRCMASK		(7 << 24)
+
+#define S3C2410_DCON_BYTE		(0 << 20)
+#define S3C2410_DCON_HALFWORD		(1 << 20)
+#define S3C2410_DCON_WORD		(2 << 20)
+
+#define S3C2410_DCON_AUTORELOAD		(0 << 22)
+#define S3C2410_DCON_NORELOAD		(1 << 22)
+#define S3C2410_DCON_HWTRIG		(1 << 23)
+
+#ifdef CONFIG_CPU_S3C2440
+
+#define S3C2440_DIDSTC_CHKINT		(1 << 2)
+
+#define S3C2440_DCON_CH0_I2SSDO		(5 << 24)
+#define S3C2440_DCON_CH0_PCMIN		(6 << 24)
+
+#define S3C2440_DCON_CH1_PCMOUT		(5 << 24)
+#define S3C2440_DCON_CH1_SDI		(6 << 24)
+
+#define S3C2440_DCON_CH2_PCMIN		(5 << 24)
+#define S3C2440_DCON_CH2_MICIN		(6 << 24)
+
+#define S3C2440_DCON_CH3_MICIN		(5 << 24)
+#define S3C2440_DCON_CH3_PCMOUT		(6 << 24)
+#endif /* CONFIG_CPU_S3C2440 */
+
+#ifdef CONFIG_CPU_S3C2412
+
+#define S3C2412_DMAREQSEL_SRC(x)	((x) << 1)
+
+#define S3C2412_DMAREQSEL_HW		(1)
+
+#define S3C2412_DMAREQSEL_SPI0TX	S3C2412_DMAREQSEL_SRC(0)
+#define S3C2412_DMAREQSEL_SPI0RX	S3C2412_DMAREQSEL_SRC(1)
+#define S3C2412_DMAREQSEL_SPI1TX	S3C2412_DMAREQSEL_SRC(2)
+#define S3C2412_DMAREQSEL_SPI1RX	S3C2412_DMAREQSEL_SRC(3)
+#define S3C2412_DMAREQSEL_I2STX		S3C2412_DMAREQSEL_SRC(4)
+#define S3C2412_DMAREQSEL_I2SRX		S3C2412_DMAREQSEL_SRC(5)
+#define S3C2412_DMAREQSEL_TIMER		S3C2412_DMAREQSEL_SRC(9)
+#define S3C2412_DMAREQSEL_SDI		S3C2412_DMAREQSEL_SRC(10)
+#define S3C2412_DMAREQSEL_USBEP1	S3C2412_DMAREQSEL_SRC(13)
+#define S3C2412_DMAREQSEL_USBEP2	S3C2412_DMAREQSEL_SRC(14)
+#define S3C2412_DMAREQSEL_USBEP3	S3C2412_DMAREQSEL_SRC(15)
+#define S3C2412_DMAREQSEL_USBEP4	S3C2412_DMAREQSEL_SRC(16)
+#define S3C2412_DMAREQSEL_XDREQ0	S3C2412_DMAREQSEL_SRC(17)
+#define S3C2412_DMAREQSEL_XDREQ1	S3C2412_DMAREQSEL_SRC(18)
+#define S3C2412_DMAREQSEL_UART0_0	S3C2412_DMAREQSEL_SRC(19)
+#define S3C2412_DMAREQSEL_UART0_1	S3C2412_DMAREQSEL_SRC(20)
+#define S3C2412_DMAREQSEL_UART1_0	S3C2412_DMAREQSEL_SRC(21)
+#define S3C2412_DMAREQSEL_UART1_1	S3C2412_DMAREQSEL_SRC(22)
+#define S3C2412_DMAREQSEL_UART2_0	S3C2412_DMAREQSEL_SRC(23)
+#define S3C2412_DMAREQSEL_UART2_1	S3C2412_DMAREQSEL_SRC(24)
+#endif /* CONFIG_CPU_S3C2412 */
+
+#ifdef CONFIG_CPU_S3C2443
+
+#define S3C2443_DMAREQSEL_SRC(x)	((x) << 1)
+
+#define S3C2443_DMAREQSEL_HW		(1)
+
+#define S3C2443_DMAREQSEL_SPI0TX	S3C2443_DMAREQSEL_SRC(0)
+#define S3C2443_DMAREQSEL_SPI0RX	S3C2443_DMAREQSEL_SRC(1)
+#define S3C2443_DMAREQSEL_SPI1TX	S3C2443_DMAREQSEL_SRC(2)
+#define S3C2443_DMAREQSEL_SPI1RX	S3C2443_DMAREQSEL_SRC(3)
+#define S3C2443_DMAREQSEL_I2STX		S3C2443_DMAREQSEL_SRC(4)
+#define S3C2443_DMAREQSEL_I2SRX		S3C2443_DMAREQSEL_SRC(5)
+#define S3C2443_DMAREQSEL_TIMER		S3C2443_DMAREQSEL_SRC(9)
+#define S3C2443_DMAREQSEL_SDI		S3C2443_DMAREQSEL_SRC(10)
+#define S3C2443_DMAREQSEL_XDREQ0	S3C2443_DMAREQSEL_SRC(17)
+#define S3C2443_DMAREQSEL_XDREQ1	S3C2443_DMAREQSEL_SRC(18)
+#define S3C2443_DMAREQSEL_UART0_0	S3C2443_DMAREQSEL_SRC(19)
+#define S3C2443_DMAREQSEL_UART0_1	S3C2443_DMAREQSEL_SRC(20)
+#define S3C2443_DMAREQSEL_UART1_0	S3C2443_DMAREQSEL_SRC(21)
+#define S3C2443_DMAREQSEL_UART1_1	S3C2443_DMAREQSEL_SRC(22)
+#define S3C2443_DMAREQSEL_UART2_0	S3C2443_DMAREQSEL_SRC(23)
+#define S3C2443_DMAREQSEL_UART2_1	S3C2443_DMAREQSEL_SRC(24)
+#define S3C2443_DMAREQSEL_UART3_0	S3C2443_DMAREQSEL_SRC(25)
+#define S3C2443_DMAREQSEL_UART3_1	S3C2443_DMAREQSEL_SRC(26)
+#define S3C2443_DMAREQSEL_PCMOUT	S3C2443_DMAREQSEL_SRC(27)
+#define S3C2443_DMAREQSEL_PCMIN		S3C2443_DMAREQSEL_SRC(28)
+#define S3C2443_DMAREQSEL_MICIN		S3C2443_DMAREQSEL_SRC(29)
+#endif /* CONFIG_CPU_S3C2443 */
+
+#endif /* __ASM_PLAT_REGS_DMA_H */
diff --git a/arch/arm/plat-samsung/include/plat/regs-iis.h b/arch/arm/plat-samsung/include/plat/regs-iis.h
new file mode 100644
index 00000000000..a18d35e7a73
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/regs-iis.h
@@ -0,0 +1,70 @@
+/* arch/arm/plat-samsung/include/plat/regs-iis.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 IIS register definition
+*/
+
+#ifndef __ASM_ARCH_REGS_IIS_H
+#define __ASM_ARCH_REGS_IIS_H
+
+#define S3C2410_IISCON			(0x00)
+
+#define S3C2410_IISCON_LRINDEX		(1 << 8)
+#define S3C2410_IISCON_TXFIFORDY	(1 << 7)
+#define S3C2410_IISCON_RXFIFORDY	(1 << 6)
+#define S3C2410_IISCON_TXDMAEN		(1 << 5)
+#define S3C2410_IISCON_RXDMAEN		(1 << 4)
+#define S3C2410_IISCON_TXIDLE		(1 << 3)
+#define S3C2410_IISCON_RXIDLE		(1 << 2)
+#define S3C2410_IISCON_PSCEN		(1 << 1)
+#define S3C2410_IISCON_IISEN		(1 << 0)
+
+#define S3C2410_IISMOD			(0x04)
+
+#define S3C2440_IISMOD_MPLL		(1 << 9)
+#define S3C2410_IISMOD_SLAVE		(1 << 8)
+#define S3C2410_IISMOD_NOXFER		(0 << 6)
+#define S3C2410_IISMOD_RXMODE		(1 << 6)
+#define S3C2410_IISMOD_TXMODE		(2 << 6)
+#define S3C2410_IISMOD_TXRXMODE		(3 << 6)
+#define S3C2410_IISMOD_LR_LLOW		(0 << 5)
+#define S3C2410_IISMOD_LR_RLOW		(1 << 5)
+#define S3C2410_IISMOD_IIS		(0 << 4)
+#define S3C2410_IISMOD_MSB		(1 << 4)
+#define S3C2410_IISMOD_8BIT		(0 << 3)
+#define S3C2410_IISMOD_16BIT		(1 << 3)
+#define S3C2410_IISMOD_BITMASK		(1 << 3)
+#define S3C2410_IISMOD_256FS		(0 << 2)
+#define S3C2410_IISMOD_384FS		(1 << 2)
+#define S3C2410_IISMOD_16FS		(0 << 0)
+#define S3C2410_IISMOD_32FS		(1 << 0)
+#define S3C2410_IISMOD_48FS		(2 << 0)
+#define S3C2410_IISMOD_FS_MASK		(3 << 0)
+
+#define S3C2410_IISPSR			(0x08)
+
+#define S3C2410_IISPSR_INTMASK		(31 << 5)
+#define S3C2410_IISPSR_INTSHIFT		(5)
+#define S3C2410_IISPSR_EXTMASK		(31 << 0)
+#define S3C2410_IISPSR_EXTSHFIT		(0)
+
+#define S3C2410_IISFCON			(0x0c)
+
+#define S3C2410_IISFCON_TXDMA		(1 << 15)
+#define S3C2410_IISFCON_RXDMA		(1 << 14)
+#define S3C2410_IISFCON_TXENABLE	(1 << 13)
+#define S3C2410_IISFCON_RXENABLE	(1 << 12)
+#define S3C2410_IISFCON_TXMASK		(0x3f << 6)
+#define S3C2410_IISFCON_TXSHIFT		(6)
+#define S3C2410_IISFCON_RXMASK		(0x3f)
+#define S3C2410_IISFCON_RXSHIFT		(0)
+
+#define S3C2410_IISFIFO			(0x10)
+
+#endif /* __ASM_ARCH_REGS_IIS_H */
diff --git a/arch/arm/plat-samsung/include/plat/regs-spi.h b/arch/arm/plat-samsung/include/plat/regs-spi.h
new file mode 100644
index 00000000000..552fe7cfe28
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/regs-spi.h
@@ -0,0 +1,48 @@
+/* arch/arm/plat-samsung/include/plat/regs-spi.h
+ *
+ * Copyright (c) 2004 Fetron GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 SPI register definition
+*/
+
+#ifndef __ASM_ARCH_REGS_SPI_H
+#define __ASM_ARCH_REGS_SPI_H
+
+#define S3C2410_SPI1		(0x20)
+#define S3C2412_SPI1		(0x100)
+
+#define S3C2410_SPCON		(0x00)
+
+#define S3C2410_SPCON_SMOD_DMA	(2 << 5)	/* DMA mode */
+#define S3C2410_SPCON_SMOD_INT	(1 << 5)	/* interrupt mode */
+#define S3C2410_SPCON_SMOD_POLL	(0 << 5)	/* polling mode */
+#define S3C2410_SPCON_ENSCK	(1 << 4)	/* Enable SCK */
+#define S3C2410_SPCON_MSTR	(1 << 3)	/* Master:1, Slave:0 select */
+#define S3C2410_SPCON_CPOL_HIGH	(1 << 2)	/* Clock polarity select */
+#define S3C2410_SPCON_CPOL_LOW	(0 << 2)	/* Clock polarity select */
+
+#define S3C2410_SPCON_CPHA_FMTB	(1 << 1)	/* Clock Phase Select */
+#define S3C2410_SPCON_CPHA_FMTA	(0 << 1)	/* Clock Phase Select */
+
+#define S3C2410_SPSTA		(0x04)
+
+#define S3C2410_SPSTA_DCOL	(1 << 2)	/* Data Collision Error */
+#define S3C2410_SPSTA_MULD	(1 << 1)	/* Multi Master Error */
+#define S3C2410_SPSTA_READY	(1 << 0)	/* Data Tx/Rx ready */
+#define S3C2412_SPSTA_READY_ORG	(1 << 3)
+
+#define S3C2410_SPPIN		(0x08)
+
+#define S3C2410_SPPIN_ENMUL	(1 << 2)	/* Multi Master Error detect */
+#define S3C2410_SPPIN_RESERVED	(1 << 1)
+#define S3C2410_SPPIN_KEEP	(1 << 0)	/* Master Out keep */
+
+#define S3C2410_SPPRE		(0x0C)
+#define S3C2410_SPTDAT		(0x10)
+#define S3C2410_SPRDAT		(0x14)
+
+#endif /* __ASM_ARCH_REGS_SPI_H */
diff --git a/arch/arm/plat-samsung/include/plat/regs-udc.h b/arch/arm/plat-samsung/include/plat/regs-udc.h
new file mode 100644
index 00000000000..4003d3dab4e
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/regs-udc.h
@@ -0,0 +1,151 @@
+/* arch/arm/plat-samsung/include/plat/regs-udc.h
+ *
+ * Copyright (C) 2004 Herbert Poetzl <herbert@13thfloor.at>
+ *
+ * This include file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+*/
+
+#ifndef __ASM_ARCH_REGS_UDC_H
+#define __ASM_ARCH_REGS_UDC_H
+
+#define S3C2410_USBDREG(x) (x)
+
+#define S3C2410_UDC_FUNC_ADDR_REG	S3C2410_USBDREG(0x0140)
+#define S3C2410_UDC_PWR_REG		S3C2410_USBDREG(0x0144)
+#define S3C2410_UDC_EP_INT_REG		S3C2410_USBDREG(0x0148)
+
+#define S3C2410_UDC_USB_INT_REG		S3C2410_USBDREG(0x0158)
+#define S3C2410_UDC_EP_INT_EN_REG	S3C2410_USBDREG(0x015c)
+
+#define S3C2410_UDC_USB_INT_EN_REG	S3C2410_USBDREG(0x016c)
+
+#define S3C2410_UDC_FRAME_NUM1_REG	S3C2410_USBDREG(0x0170)
+#define S3C2410_UDC_FRAME_NUM2_REG	S3C2410_USBDREG(0x0174)
+
+#define S3C2410_UDC_EP0_FIFO_REG	S3C2410_USBDREG(0x01c0)
+#define S3C2410_UDC_EP1_FIFO_REG	S3C2410_USBDREG(0x01c4)
+#define S3C2410_UDC_EP2_FIFO_REG	S3C2410_USBDREG(0x01c8)
+#define S3C2410_UDC_EP3_FIFO_REG	S3C2410_USBDREG(0x01cc)
+#define S3C2410_UDC_EP4_FIFO_REG	S3C2410_USBDREG(0x01d0)
+
+#define S3C2410_UDC_EP1_DMA_CON		S3C2410_USBDREG(0x0200)
+#define S3C2410_UDC_EP1_DMA_UNIT	S3C2410_USBDREG(0x0204)
+#define S3C2410_UDC_EP1_DMA_FIFO	S3C2410_USBDREG(0x0208)
+#define S3C2410_UDC_EP1_DMA_TTC_L	S3C2410_USBDREG(0x020c)
+#define S3C2410_UDC_EP1_DMA_TTC_M	S3C2410_USBDREG(0x0210)
+#define S3C2410_UDC_EP1_DMA_TTC_H	S3C2410_USBDREG(0x0214)
+
+#define S3C2410_UDC_EP2_DMA_CON		S3C2410_USBDREG(0x0218)
+#define S3C2410_UDC_EP2_DMA_UNIT	S3C2410_USBDREG(0x021c)
+#define S3C2410_UDC_EP2_DMA_FIFO	S3C2410_USBDREG(0x0220)
+#define S3C2410_UDC_EP2_DMA_TTC_L	S3C2410_USBDREG(0x0224)
+#define S3C2410_UDC_EP2_DMA_TTC_M	S3C2410_USBDREG(0x0228)
+#define S3C2410_UDC_EP2_DMA_TTC_H	S3C2410_USBDREG(0x022c)
+
+#define S3C2410_UDC_EP3_DMA_CON		S3C2410_USBDREG(0x0240)
+#define S3C2410_UDC_EP3_DMA_UNIT	S3C2410_USBDREG(0x0244)
+#define S3C2410_UDC_EP3_DMA_FIFO	S3C2410_USBDREG(0x0248)
+#define S3C2410_UDC_EP3_DMA_TTC_L	S3C2410_USBDREG(0x024c)
+#define S3C2410_UDC_EP3_DMA_TTC_M	S3C2410_USBDREG(0x0250)
+#define S3C2410_UDC_EP3_DMA_TTC_H	S3C2410_USBDREG(0x0254)
+
+#define S3C2410_UDC_EP4_DMA_CON		S3C2410_USBDREG(0x0258)
+#define S3C2410_UDC_EP4_DMA_UNIT	S3C2410_USBDREG(0x025c)
+#define S3C2410_UDC_EP4_DMA_FIFO	S3C2410_USBDREG(0x0260)
+#define S3C2410_UDC_EP4_DMA_TTC_L	S3C2410_USBDREG(0x0264)
+#define S3C2410_UDC_EP4_DMA_TTC_M	S3C2410_USBDREG(0x0268)
+#define S3C2410_UDC_EP4_DMA_TTC_H	S3C2410_USBDREG(0x026c)
+
+#define S3C2410_UDC_INDEX_REG		S3C2410_USBDREG(0x0178)
+
+/* indexed registers */
+
+#define S3C2410_UDC_MAXP_REG		S3C2410_USBDREG(0x0180)
+
+#define S3C2410_UDC_EP0_CSR_REG		S3C2410_USBDREG(0x0184)
+
+#define S3C2410_UDC_IN_CSR1_REG		S3C2410_USBDREG(0x0184)
+#define S3C2410_UDC_IN_CSR2_REG		S3C2410_USBDREG(0x0188)
+
+#define S3C2410_UDC_OUT_CSR1_REG	S3C2410_USBDREG(0x0190)
+#define S3C2410_UDC_OUT_CSR2_REG	S3C2410_USBDREG(0x0194)
+#define S3C2410_UDC_OUT_FIFO_CNT1_REG	S3C2410_USBDREG(0x0198)
+#define S3C2410_UDC_OUT_FIFO_CNT2_REG	S3C2410_USBDREG(0x019c)
+
+#define S3C2410_UDC_FUNCADDR_UPDATE	(1 << 7)
+
+#define S3C2410_UDC_PWR_ISOUP		(1 << 7) /* R/W */
+#define S3C2410_UDC_PWR_RESET		(1 << 3) /* R   */
+#define S3C2410_UDC_PWR_RESUME		(1 << 2) /* R/W */
+#define S3C2410_UDC_PWR_SUSPEND		(1 << 1) /* R   */
+#define S3C2410_UDC_PWR_ENSUSPEND	(1 << 0) /* R/W */
+
+#define S3C2410_UDC_PWR_DEFAULT		(0x00)
+
+#define S3C2410_UDC_INT_EP4		(1 << 4) /* R/W (clear only) */
+#define S3C2410_UDC_INT_EP3		(1 << 3) /* R/W (clear only) */
+#define S3C2410_UDC_INT_EP2		(1 << 2) /* R/W (clear only) */
+#define S3C2410_UDC_INT_EP1		(1 << 1) /* R/W (clear only) */
+#define S3C2410_UDC_INT_EP0		(1 << 0) /* R/W (clear only) */
+
+#define S3C2410_UDC_USBINT_RESET	(1 << 2) /* R/W (clear only) */
+#define S3C2410_UDC_USBINT_RESUME	(1 << 1) /* R/W (clear only) */
+#define S3C2410_UDC_USBINT_SUSPEND	(1 << 0) /* R/W (clear only) */
+
+#define S3C2410_UDC_INTE_EP4		(1 << 4) /* R/W */
+#define S3C2410_UDC_INTE_EP3		(1 << 3) /* R/W */
+#define S3C2410_UDC_INTE_EP2		(1 << 2) /* R/W */
+#define S3C2410_UDC_INTE_EP1		(1 << 1) /* R/W */
+#define S3C2410_UDC_INTE_EP0		(1 << 0) /* R/W */
+
+#define S3C2410_UDC_USBINTE_RESET	(1 << 2) /* R/W */
+#define S3C2410_UDC_USBINTE_SUSPEND	(1 << 0) /* R/W */
+
+#define S3C2410_UDC_INDEX_EP0		(0x00)
+#define S3C2410_UDC_INDEX_EP1		(0x01)
+#define S3C2410_UDC_INDEX_EP2		(0x02)
+#define S3C2410_UDC_INDEX_EP3		(0x03)
+#define S3C2410_UDC_INDEX_EP4		(0x04)
+
+#define S3C2410_UDC_ICSR1_CLRDT		(1 << 6) /* R/W */
+#define S3C2410_UDC_ICSR1_SENTSTL	(1 << 5) /* R/W (clear only) */
+#define S3C2410_UDC_ICSR1_SENDSTL	(1 << 4) /* R/W */
+#define S3C2410_UDC_ICSR1_FFLUSH	(1 << 3) /* W   (set only) */
+#define S3C2410_UDC_ICSR1_UNDRUN	(1 << 2) /* R/W (clear only) */
+#define S3C2410_UDC_ICSR1_PKTRDY	(1 << 0) /* R/W (set only) */
+
+#define S3C2410_UDC_ICSR2_AUTOSET	(1 << 7) /* R/W */
+#define S3C2410_UDC_ICSR2_ISO		(1 << 6) /* R/W */
+#define S3C2410_UDC_ICSR2_MODEIN	(1 << 5) /* R/W */
+#define S3C2410_UDC_ICSR2_DMAIEN	(1 << 4) /* R/W */
+
+#define S3C2410_UDC_OCSR1_CLRDT		(1 << 7) /* R/W */
+#define S3C2410_UDC_OCSR1_SENTSTL	(1 << 6) /* R/W (clear only) */
+#define S3C2410_UDC_OCSR1_SENDSTL	(1 << 5) /* R/W */
+#define S3C2410_UDC_OCSR1_FFLUSH	(1 << 4) /* R/W */
+#define S3C2410_UDC_OCSR1_DERROR	(1 << 3) /* R   */
+#define S3C2410_UDC_OCSR1_OVRRUN	(1 << 2) /* R/W (clear only) */
+#define S3C2410_UDC_OCSR1_PKTRDY	(1 << 0) /* R/W (clear only) */
+
+#define S3C2410_UDC_OCSR2_AUTOCLR	(1 << 7) /* R/W */
+#define S3C2410_UDC_OCSR2_ISO		(1 << 6) /* R/W */
+#define S3C2410_UDC_OCSR2_DMAIEN	(1 << 5) /* R/W */
+
+#define S3C2410_UDC_EP0_CSR_OPKRDY	(1 << 0)
+#define S3C2410_UDC_EP0_CSR_IPKRDY	(1 << 1)
+#define S3C2410_UDC_EP0_CSR_SENTSTL	(1 << 2)
+#define S3C2410_UDC_EP0_CSR_DE		(1 << 3)
+#define S3C2410_UDC_EP0_CSR_SE		(1 << 4)
+#define S3C2410_UDC_EP0_CSR_SENDSTL	(1 << 5)
+#define S3C2410_UDC_EP0_CSR_SOPKTRDY	(1 << 6)
+#define S3C2410_UDC_EP0_CSR_SSE		(1 << 7)
+
+#define S3C2410_UDC_MAXP_8		(1 << 0)
+#define S3C2410_UDC_MAXP_16		(1 << 1)
+#define S3C2410_UDC_MAXP_32		(1 << 2)
+#define S3C2410_UDC_MAXP_64		(1 << 3)
+
+#endif
diff --git a/arch/arm/plat-samsung/include/plat/udc.h b/arch/arm/plat-samsung/include/plat/udc.h
new file mode 100644
index 00000000000..8c22d586bef
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/udc.h
@@ -0,0 +1,57 @@
+/* arch/arm/plat-samsung/include/plat/udc.h
+ *
+ * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *
+ *  Changelog:
+ *	14-Mar-2005	RTP	Created file
+ *	02-Aug-2005	RTP	File rename
+ *	07-Sep-2005	BJD	Minor cleanups, changed cmd to enum
+ *	18-Jan-2007	HMW	Add per-platform vbus_draw function
+*/
+
+#ifndef __ASM_ARM_ARCH_UDC_H
+#define __ASM_ARM_ARCH_UDC_H
+
+enum s3c2410_udc_cmd_e {
+	S3C2410_UDC_P_ENABLE	= 1,	/* Pull-up enable        */
+	S3C2410_UDC_P_DISABLE	= 2,	/* Pull-up disable       */
+	S3C2410_UDC_P_RESET	= 3,	/* UDC reset, in case of */
+};
+
+struct s3c2410_udc_mach_info {
+	void	(*udc_command)(enum s3c2410_udc_cmd_e);
+	void	(*vbus_draw)(unsigned int ma);
+
+	unsigned int pullup_pin;
+	unsigned int pullup_pin_inverted;
+
+	unsigned int vbus_pin;
+	unsigned char vbus_pin_inverted;
+};
+
+extern void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *);
+
+/**
+ * s3c24xx_hsudc_platdata - Platform data for USB High-Speed gadget controller.
+ * @epnum: Number of endpoints to be instantiated by the controller driver.
+ * @gpio_init: Platform specific USB related GPIO initialization.
+ * @gpio_uninit: Platform specific USB releted GPIO uninitialzation.
+ *
+ * Representation of platform data for the S3C24XX USB 2.0 High Speed gadget
+ * controllers.
+ */
+struct s3c24xx_hsudc_platdata {
+	unsigned int	epnum;
+	void		(*gpio_init)(void);
+	void		(*gpio_uninit)(void);
+};
+
+extern void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd);
+
+#endif /* __ASM_ARM_ARCH_UDC_H */
-- 
cgit v1.2.3-18-g5258


From e90a0f3c460406d6a5a698016bc525c3e6968cb6 Mon Sep 17 00:00:00 2001
From: Kukjin Kim <kgene.kim@samsung.com>
Date: Wed, 28 Sep 2011 21:06:52 +0900
Subject: ARM: SAMSUNG: Move S5P header files to plat-samsung

This patch moves header files from plat-s5p to plat-samsung to
remove plat-s5p directory to make one plat-samsung directory
for Samsung SoCs.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/plat-s5p/include/plat/camport.h          |  28 ------
 arch/arm/plat-s5p/include/plat/ehci.h             |  21 ----
 arch/arm/plat-s5p/include/plat/irqs.h             | 115 ----------------------
 arch/arm/plat-s5p/include/plat/mfc.h              |  27 -----
 arch/arm/plat-s5p/include/plat/mipi_csis.h        |  43 --------
 arch/arm/plat-s5p/include/plat/regs-srom.h        |  54 ----------
 arch/arm/plat-s5p/include/plat/reset.h            |  16 ---
 arch/arm/plat-s5p/include/plat/s5p-clock.h        |  55 -----------
 arch/arm/plat-s5p/include/plat/s5p-time.h         |  40 --------
 arch/arm/plat-s5p/include/plat/sysmmu.h           |  95 ------------------
 arch/arm/plat-s5p/include/plat/system-reset.h     |  31 ------
 arch/arm/plat-s5p/include/plat/usb-phy.h          |  22 -----
 arch/arm/plat-samsung/include/plat/camport.h      |  28 ++++++
 arch/arm/plat-samsung/include/plat/ehci.h         |  21 ++++
 arch/arm/plat-samsung/include/plat/irqs.h         | 115 ++++++++++++++++++++++
 arch/arm/plat-samsung/include/plat/mfc.h          |  27 +++++
 arch/arm/plat-samsung/include/plat/mipi_csis.h    |  43 ++++++++
 arch/arm/plat-samsung/include/plat/regs-srom.h    |  54 ++++++++++
 arch/arm/plat-samsung/include/plat/reset.h        |  16 +++
 arch/arm/plat-samsung/include/plat/s5p-clock.h    |  55 +++++++++++
 arch/arm/plat-samsung/include/plat/s5p-time.h     |  40 ++++++++
 arch/arm/plat-samsung/include/plat/sysmmu.h       |  95 ++++++++++++++++++
 arch/arm/plat-samsung/include/plat/system-reset.h |  31 ++++++
 arch/arm/plat-samsung/include/plat/usb-phy.h      |  22 +++++
 24 files changed, 547 insertions(+), 547 deletions(-)
 delete mode 100644 arch/arm/plat-s5p/include/plat/camport.h
 delete mode 100644 arch/arm/plat-s5p/include/plat/ehci.h
 delete mode 100644 arch/arm/plat-s5p/include/plat/irqs.h
 delete mode 100644 arch/arm/plat-s5p/include/plat/mfc.h
 delete mode 100644 arch/arm/plat-s5p/include/plat/mipi_csis.h
 delete mode 100644 arch/arm/plat-s5p/include/plat/regs-srom.h
 delete mode 100644 arch/arm/plat-s5p/include/plat/reset.h
 delete mode 100644 arch/arm/plat-s5p/include/plat/s5p-clock.h
 delete mode 100644 arch/arm/plat-s5p/include/plat/s5p-time.h
 delete mode 100644 arch/arm/plat-s5p/include/plat/sysmmu.h
 delete mode 100644 arch/arm/plat-s5p/include/plat/system-reset.h
 delete mode 100644 arch/arm/plat-s5p/include/plat/usb-phy.h
 create mode 100644 arch/arm/plat-samsung/include/plat/camport.h
 create mode 100644 arch/arm/plat-samsung/include/plat/ehci.h
 create mode 100644 arch/arm/plat-samsung/include/plat/irqs.h
 create mode 100644 arch/arm/plat-samsung/include/plat/mfc.h
 create mode 100644 arch/arm/plat-samsung/include/plat/mipi_csis.h
 create mode 100644 arch/arm/plat-samsung/include/plat/regs-srom.h
 create mode 100644 arch/arm/plat-samsung/include/plat/reset.h
 create mode 100644 arch/arm/plat-samsung/include/plat/s5p-clock.h
 create mode 100644 arch/arm/plat-samsung/include/plat/s5p-time.h
 create mode 100644 arch/arm/plat-samsung/include/plat/sysmmu.h
 create mode 100644 arch/arm/plat-samsung/include/plat/system-reset.h
 create mode 100644 arch/arm/plat-samsung/include/plat/usb-phy.h

(limited to 'arch')

diff --git a/arch/arm/plat-s5p/include/plat/camport.h b/arch/arm/plat-s5p/include/plat/camport.h
deleted file mode 100644
index 71688c8ba28..00000000000
--- a/arch/arm/plat-s5p/include/plat/camport.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- *
- * S5P series camera interface helper functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef PLAT_S5P_CAMPORT_H_
-#define PLAT_S5P_CAMPORT_H_ __FILE__
-
-enum s5p_camport_id {
-	S5P_CAMPORT_A,
-	S5P_CAMPORT_B,
-};
-
-/*
- * The helper functions to configure GPIO for the camera parallel bus.
- * The camera port can be multiplexed with any FIMC entity, even multiple
- * FIMC entities are allowed to be attached to a single port simultaneously.
- * These functions are to be used in the board setup code.
- */
-int s5pv210_fimc_setup_gpio(enum s5p_camport_id id);
-int exynos4_fimc_setup_gpio(enum s5p_camport_id id);
-
-#endif
diff --git a/arch/arm/plat-s5p/include/plat/ehci.h b/arch/arm/plat-s5p/include/plat/ehci.h
deleted file mode 100644
index 6ae6810c756..00000000000
--- a/arch/arm/plat-s5p/include/plat/ehci.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __PLAT_S5P_EHCI_H
-#define __PLAT_S5P_EHCI_H
-
-struct s5p_ehci_platdata {
-	int (*phy_init)(struct platform_device *pdev, int type);
-	int (*phy_exit)(struct platform_device *pdev, int type);
-};
-
-extern void s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd);
-
-#endif /* __PLAT_S5P_EHCI_H */
diff --git a/arch/arm/plat-s5p/include/plat/irqs.h b/arch/arm/plat-s5p/include/plat/irqs.h
deleted file mode 100644
index ba9121c60a2..00000000000
--- a/arch/arm/plat-s5p/include/plat/irqs.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/* linux/arch/arm/plat-s5p/include/plat/irqs.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P Common IRQ support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_S5P_IRQS_H
-#define __ASM_PLAT_S5P_IRQS_H __FILE__
-
-/* we keep the first set of CPU IRQs out of the range of
- * the ISA space, so that the PC104 has them to itself
- * and we don't end up having to do horrible things to the
- * standard ISA drivers....
- *
- * note, since we're using the VICs, our start must be a
- * mulitple of 32 to allow the common code to work
- */
-
-#define S5P_IRQ_OFFSET		(32)
-
-#define S5P_IRQ(x)		((x) + S5P_IRQ_OFFSET)
-
-#define S5P_VIC0_BASE		S5P_IRQ(0)
-#define S5P_VIC1_BASE		S5P_IRQ(32)
-#define S5P_VIC2_BASE		S5P_IRQ(64)
-#define S5P_VIC3_BASE		S5P_IRQ(96)
-
-#define VIC_BASE(x)		(S5P_VIC0_BASE + ((x)*32))
-
-#define IRQ_VIC0_BASE		S5P_VIC0_BASE
-#define IRQ_VIC1_BASE		S5P_VIC1_BASE
-#define IRQ_VIC2_BASE		S5P_VIC2_BASE
-
-/* UART interrupts, each UART has 4 intterupts per channel so
- * use the space between the ISA and S3C main interrupts. Note, these
- * are not in the same order as the S3C24XX series! */
-
-#define IRQ_S5P_UART_BASE0	(16)
-#define IRQ_S5P_UART_BASE1	(20)
-#define IRQ_S5P_UART_BASE2	(24)
-#define IRQ_S5P_UART_BASE3	(28)
-
-#define UART_IRQ_RXD		(0)
-#define UART_IRQ_ERR		(1)
-#define UART_IRQ_TXD		(2)
-
-#define IRQ_S5P_UART_RX0	(IRQ_S5P_UART_BASE0 + UART_IRQ_RXD)
-#define IRQ_S5P_UART_TX0	(IRQ_S5P_UART_BASE0 + UART_IRQ_TXD)
-#define IRQ_S5P_UART_ERR0	(IRQ_S5P_UART_BASE0 + UART_IRQ_ERR)
-
-#define IRQ_S5P_UART_RX1	(IRQ_S5P_UART_BASE1 + UART_IRQ_RXD)
-#define IRQ_S5P_UART_TX1	(IRQ_S5P_UART_BASE1 + UART_IRQ_TXD)
-#define IRQ_S5P_UART_ERR1	(IRQ_S5P_UART_BASE1 + UART_IRQ_ERR)
-
-#define IRQ_S5P_UART_RX2	(IRQ_S5P_UART_BASE2 + UART_IRQ_RXD)
-#define IRQ_S5P_UART_TX2	(IRQ_S5P_UART_BASE2 + UART_IRQ_TXD)
-#define IRQ_S5P_UART_ERR2	(IRQ_S5P_UART_BASE2 + UART_IRQ_ERR)
-
-#define IRQ_S5P_UART_RX3	(IRQ_S5P_UART_BASE3 + UART_IRQ_RXD)
-#define IRQ_S5P_UART_TX3	(IRQ_S5P_UART_BASE3 + UART_IRQ_TXD)
-#define IRQ_S5P_UART_ERR3	(IRQ_S5P_UART_BASE3 + UART_IRQ_ERR)
-
-/* S3C compatibilty defines */
-#define IRQ_S3CUART_RX0		IRQ_S5P_UART_RX0
-#define IRQ_S3CUART_RX1		IRQ_S5P_UART_RX1
-#define IRQ_S3CUART_RX2		IRQ_S5P_UART_RX2
-#define IRQ_S3CUART_RX3		IRQ_S5P_UART_RX3
-
-/* VIC based IRQs */
-
-#define S5P_IRQ_VIC0(x)		(S5P_VIC0_BASE + (x))
-#define S5P_IRQ_VIC1(x)		(S5P_VIC1_BASE + (x))
-#define S5P_IRQ_VIC2(x)		(S5P_VIC2_BASE + (x))
-#define S5P_IRQ_VIC3(x)		(S5P_VIC3_BASE + (x))
-
-#define S5P_TIMER_IRQ(x)	(11 + (x))
-
-#define IRQ_TIMER0		S5P_TIMER_IRQ(0)
-#define IRQ_TIMER1		S5P_TIMER_IRQ(1)
-#define IRQ_TIMER2		S5P_TIMER_IRQ(2)
-#define IRQ_TIMER3		S5P_TIMER_IRQ(3)
-#define IRQ_TIMER4		S5P_TIMER_IRQ(4)
-
-#define IRQ_EINT(x)		((x) < 16 ? ((x) + S5P_EINT_BASE1) \
-					: ((x) - 16 + S5P_EINT_BASE2))
-
-#define EINT_OFFSET(irq)	((irq) < S5P_EINT_BASE2 ? \
-						((irq) - S5P_EINT_BASE1) : \
-						((irq) + 16 - S5P_EINT_BASE2))
-
-#define IRQ_EINT_BIT(x)		EINT_OFFSET(x)
-
-/* Typically only a few gpio chips require gpio interrupt support.
-   To avoid memory waste irq descriptors are allocated only for
-   S5P_GPIOINT_GROUP_COUNT chips, each with total number of
-   S5P_GPIOINT_GROUP_SIZE pins/irqs. Each GPIOINT group can be assiged
-   to any gpio chip with the s5p_register_gpio_interrupt() function */
-#define S5P_GPIOINT_GROUP_COUNT 4
-#define S5P_GPIOINT_GROUP_SIZE	8
-#define S5P_GPIOINT_COUNT	(S5P_GPIOINT_GROUP_COUNT * S5P_GPIOINT_GROUP_SIZE)
-
-/* IRQ types common for all s5p platforms */
-#define S5P_IRQ_TYPE_LEVEL_LOW		(0x00)
-#define S5P_IRQ_TYPE_LEVEL_HIGH		(0x01)
-#define S5P_IRQ_TYPE_EDGE_FALLING	(0x02)
-#define S5P_IRQ_TYPE_EDGE_RISING	(0x03)
-#define S5P_IRQ_TYPE_EDGE_BOTH		(0x04)
-
-#endif /* __ASM_PLAT_S5P_IRQS_H */
diff --git a/arch/arm/plat-s5p/include/plat/mfc.h b/arch/arm/plat-s5p/include/plat/mfc.h
deleted file mode 100644
index 6697f8cb294..00000000000
--- a/arch/arm/plat-s5p/include/plat/mfc.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __PLAT_S5P_MFC_H
-#define __PLAT_S5P_MFC_H
-
-/**
- * s5p_mfc_reserve_mem - function to early reserve memory for MFC driver
- * @rbase:	base address for MFC 'right' memory interface
- * @rsize:	size of the memory reserved for MFC 'right' interface
- * @lbase:	base address for MFC 'left' memory interface
- * @lsize:	size of the memory reserved for MFC 'left' interface
- *
- * This function reserves system memory for both MFC device memory
- * interfaces and registers it to respective struct device entries as
- * coherent memory.
- */
-void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
-				phys_addr_t lbase, unsigned int lsize);
-
-#endif /* __PLAT_S5P_MFC_H */
diff --git a/arch/arm/plat-s5p/include/plat/mipi_csis.h b/arch/arm/plat-s5p/include/plat/mipi_csis.h
deleted file mode 100644
index 9bd254c5ed2..00000000000
--- a/arch/arm/plat-s5p/include/plat/mipi_csis.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd.
- *
- * S5P series MIPI CSI slave device support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef PLAT_S5P_MIPI_CSIS_H_
-#define PLAT_S5P_MIPI_CSIS_H_ __FILE__
-
-struct platform_device;
-
-/**
- * struct s5p_platform_mipi_csis - platform data for S5P MIPI-CSIS driver
- * @clk_rate: bus clock frequency
- * @lanes: number of data lanes used
- * @alignment: data alignment in bits
- * @hs_settle: HS-RX settle time
- * @fixed_phy_vdd: false to enable external D-PHY regulator management in the
- *		   driver or true in case this regulator has no enable function
- * @phy_enable: pointer to a callback controlling D-PHY enable/reset
- */
-struct s5p_platform_mipi_csis {
-	unsigned long clk_rate;
-	u8 lanes;
-	u8 alignment;
-	u8 hs_settle;
-	bool fixed_phy_vdd;
-	int (*phy_enable)(struct platform_device *pdev, bool on);
-};
-
-/**
- * s5p_csis_phy_enable - global MIPI-CSI receiver D-PHY control
- * @pdev: MIPI-CSIS platform device
- * @on: true to enable D-PHY and deassert its reset
- *	false to disable D-PHY
- */
-int s5p_csis_phy_enable(struct platform_device *pdev, bool on);
-
-#endif /* PLAT_S5P_MIPI_CSIS_H_ */
diff --git a/arch/arm/plat-s5p/include/plat/regs-srom.h b/arch/arm/plat-s5p/include/plat/regs-srom.h
deleted file mode 100644
index f121ab5e76c..00000000000
--- a/arch/arm/plat-s5p/include/plat/regs-srom.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* linux/arch/arm/plat-s5p/include/plat/regs-srom.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5P SROMC register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_S5P_REGS_SROM_H
-#define __ASM_PLAT_S5P_REGS_SROM_H __FILE__
-
-#include <mach/map.h>
-
-#define S5P_SROMREG(x)		(S5P_VA_SROMC + (x))
-
-#define S5P_SROM_BW		S5P_SROMREG(0x0)
-#define S5P_SROM_BC0		S5P_SROMREG(0x4)
-#define S5P_SROM_BC1		S5P_SROMREG(0x8)
-#define S5P_SROM_BC2		S5P_SROMREG(0xc)
-#define S5P_SROM_BC3		S5P_SROMREG(0x10)
-#define S5P_SROM_BC4		S5P_SROMREG(0x14)
-#define S5P_SROM_BC5		S5P_SROMREG(0x18)
-
-/* one register BW holds 4 x 4-bit packed settings for NCS0 - NCS3 */
-
-#define S5P_SROM_BW__DATAWIDTH__SHIFT		0
-#define S5P_SROM_BW__ADDRMODE__SHIFT		1
-#define S5P_SROM_BW__WAITENABLE__SHIFT		2
-#define S5P_SROM_BW__BYTEENABLE__SHIFT		3
-
-#define S5P_SROM_BW__CS_MASK			0xf
-
-#define S5P_SROM_BW__NCS0__SHIFT		0
-#define S5P_SROM_BW__NCS1__SHIFT		4
-#define S5P_SROM_BW__NCS2__SHIFT		8
-#define S5P_SROM_BW__NCS3__SHIFT		12
-#define S5P_SROM_BW__NCS4__SHIFT		16
-#define S5P_SROM_BW__NCS5__SHIFT		20
-
-/* applies to same to BCS0 - BCS3 */
-
-#define S5P_SROM_BCX__PMC__SHIFT		0
-#define S5P_SROM_BCX__TACP__SHIFT		4
-#define S5P_SROM_BCX__TCAH__SHIFT		8
-#define S5P_SROM_BCX__TCOH__SHIFT		12
-#define S5P_SROM_BCX__TACC__SHIFT		16
-#define S5P_SROM_BCX__TCOS__SHIFT		24
-#define S5P_SROM_BCX__TACS__SHIFT		28
-
-#endif /* __ASM_PLAT_S5P_REGS_SROM_H */
diff --git a/arch/arm/plat-s5p/include/plat/reset.h b/arch/arm/plat-s5p/include/plat/reset.h
deleted file mode 100644
index 335e97812ee..00000000000
--- a/arch/arm/plat-s5p/include/plat/reset.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* linux/arch/arm/plat-s5p/include/plat/reset.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_S5P_RESET_H
-#define __ASM_PLAT_S5P_RESET_H __FILE__
-
-extern void (*s5p_reset_hook)(void);
-
-#endif /* __ASM_PLAT_S5P_RESET_H */
diff --git a/arch/arm/plat-s5p/include/plat/s5p-clock.h b/arch/arm/plat-s5p/include/plat/s5p-clock.h
deleted file mode 100644
index 769b5bdfb04..00000000000
--- a/arch/arm/plat-s5p/include/plat/s5p-clock.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/* linux/arch/arm/plat-s5p/include/plat/s5p-clock.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Header file for s5p clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_S5P_CLOCK_H
-#define __ASM_PLAT_S5P_CLOCK_H __FILE__
-
-#include <linux/clk.h>
-
-#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
-
-#define clk_fin_apll clk_ext_xtal_mux
-#define clk_fin_mpll clk_ext_xtal_mux
-#define clk_fin_epll clk_ext_xtal_mux
-#define clk_fin_dpll clk_ext_xtal_mux
-#define clk_fin_vpll clk_ext_xtal_mux
-#define clk_fin_hpll clk_ext_xtal_mux
-
-extern struct clk clk_ext_xtal_mux;
-extern struct clk clk_xusbxti;
-extern struct clk clk_48m;
-extern struct clk s5p_clk_27m;
-extern struct clk clk_fout_apll;
-extern struct clk clk_fout_mpll;
-extern struct clk clk_fout_epll;
-extern struct clk clk_fout_dpll;
-extern struct clk clk_fout_vpll;
-extern struct clk clk_arm;
-extern struct clk clk_vpll;
-
-extern struct clksrc_sources clk_src_apll;
-extern struct clksrc_sources clk_src_mpll;
-extern struct clksrc_sources clk_src_epll;
-extern struct clksrc_sources clk_src_dpll;
-
-extern int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable);
-
-/* Common EPLL operations for S5P platform */
-extern int s5p_epll_enable(struct clk *clk, int enable);
-extern unsigned long s5p_epll_get_rate(struct clk *clk);
-
-/* SPDIF clk operations common for S5PC100/V210/C110 and Exynos4 */
-extern int s5p_spdif_set_rate(struct clk *clk, unsigned long rate);
-extern unsigned long s5p_spdif_get_rate(struct clk *clk);
-
-extern struct clk_ops s5p_sclk_spdif_ops;
-#endif /* __ASM_PLAT_S5P_CLOCK_H */
diff --git a/arch/arm/plat-s5p/include/plat/s5p-time.h b/arch/arm/plat-s5p/include/plat/s5p-time.h
deleted file mode 100644
index 575e88109db..00000000000
--- a/arch/arm/plat-s5p/include/plat/s5p-time.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* linux/arch/arm/plat-s5p/include/plat/s5p-time.h
- *
- * Copyright 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Header file for s5p time support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_S5P_TIME_H
-#define __ASM_PLAT_S5P_TIME_H __FILE__
-
-/* S5P HR-Timer Clock mode */
-enum s5p_timer_mode {
-	S5P_PWM0,
-	S5P_PWM1,
-	S5P_PWM2,
-	S5P_PWM3,
-	S5P_PWM4,
-};
-
-struct s5p_timer_source {
-	unsigned int event_id;
-	unsigned int source_id;
-};
-
-/* Be able to sleep for atleast 4 seconds (usually more) */
-#define S5PTIMER_MIN_RANGE	4
-
-#define TCNT_MAX		0xffffffff
-#define NON_PERIODIC		0
-#define PERIODIC		1
-
-extern void __init s5p_set_timer_source(enum s5p_timer_mode event,
-					enum s5p_timer_mode source);
-extern	struct sys_timer s5p_timer;
-#endif /* __ASM_PLAT_S5P_TIME_H */
diff --git a/arch/arm/plat-s5p/include/plat/sysmmu.h b/arch/arm/plat-s5p/include/plat/sysmmu.h
deleted file mode 100644
index bf5283c2a19..00000000000
--- a/arch/arm/plat-s5p/include/plat/sysmmu.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/* linux/arch/arm/plat-s5p/include/plat/sysmmu.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung System MMU driver for S5P platform
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM__PLAT_SYSMMU_H
-#define __ASM__PLAT_SYSMMU_H __FILE__
-
-enum S5P_SYSMMU_INTERRUPT_TYPE {
-	SYSMMU_PAGEFAULT,
-	SYSMMU_AR_MULTIHIT,
-	SYSMMU_AW_MULTIHIT,
-	SYSMMU_BUSERROR,
-	SYSMMU_AR_SECURITY,
-	SYSMMU_AR_ACCESS,
-	SYSMMU_AW_SECURITY,
-	SYSMMU_AW_PROTECTION, /* 7 */
-	SYSMMU_FAULTS_NUM
-};
-
-#ifdef CONFIG_S5P_SYSTEM_MMU
-
-#include <mach/sysmmu.h>
-
-/**
- * s5p_sysmmu_enable() - enable system mmu of ip
- * @ips: The ip connected system mmu.
- * #pgd: Base physical address of the 1st level page table
- *
- * This function enable system mmu to transfer address
- * from virtual address to physical address
- */
-void s5p_sysmmu_enable(sysmmu_ips ips, unsigned long pgd);
-
-/**
- * s5p_sysmmu_disable() - disable sysmmu mmu of ip
- * @ips: The ip connected system mmu.
- *
- * This function disable system mmu to transfer address
- * from virtual address to physical address
- */
-void s5p_sysmmu_disable(sysmmu_ips ips);
-
-/**
- * s5p_sysmmu_set_tablebase_pgd() - set page table base address to refer page table
- * @ips: The ip connected system mmu.
- * @pgd: The page table base address.
- *
- * This function set page table base address
- * When system mmu transfer address from virtaul address to physical address,
- * system mmu refer address information from page table
- */
-void s5p_sysmmu_set_tablebase_pgd(sysmmu_ips ips, unsigned long pgd);
-
-/**
- * s5p_sysmmu_tlb_invalidate() - flush all TLB entry in system mmu
- * @ips: The ip connected system mmu.
- *
- * This function flush all TLB entry in system mmu
- */
-void s5p_sysmmu_tlb_invalidate(sysmmu_ips ips);
-
-/** s5p_sysmmu_set_fault_handler() - Fault handler for System MMUs
- * @itype: type of fault.
- * @pgtable_base: the physical address of page table base. This is 0 if @ips is
- *               SYSMMU_BUSERROR.
- * @fault_addr: the device (virtual) address that the System MMU tried to
- *             translated. This is 0 if @ips is SYSMMU_BUSERROR.
- * Called when interrupt occurred by the System MMUs
- * The device drivers of peripheral devices that has a System MMU can implement
- * a fault handler to resolve address translation fault by System MMU.
- * The meanings of return value and parameters are described below.
-
- * return value: non-zero if the fault is correctly resolved.
- *         zero if the fault is not handled.
- */
-void s5p_sysmmu_set_fault_handler(sysmmu_ips ips,
-			int (*handler)(enum S5P_SYSMMU_INTERRUPT_TYPE itype,
-					unsigned long pgtable_base,
-					unsigned long fault_addr));
-#else
-#define s5p_sysmmu_enable(ips, pgd) do { } while (0)
-#define s5p_sysmmu_disable(ips) do { } while (0)
-#define s5p_sysmmu_set_tablebase_pgd(ips, pgd) do { } while (0)
-#define s5p_sysmmu_tlb_invalidate(ips) do { } while (0)
-#define s5p_sysmmu_set_fault_handler(ips, handler) do { } while (0)
-#endif
-#endif /* __ASM_PLAT_SYSMMU_H */
diff --git a/arch/arm/plat-s5p/include/plat/system-reset.h b/arch/arm/plat-s5p/include/plat/system-reset.h
deleted file mode 100644
index f307f34e642..00000000000
--- a/arch/arm/plat-s5p/include/plat/system-reset.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* linux/arch/arm/plat-s5p/include/plat/system-reset.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Based on arch/arm/mach-s3c2410/include/mach/system-reset.h
- *
- * S5P - System define for arch_reset()
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <plat/watchdog-reset.h>
-
-void (*s5p_reset_hook)(void);
-
-static void arch_reset(char mode, const char *cmd)
-{
-	/* SWRESET support in s5p_reset_hook() */
-
-	if (s5p_reset_hook)
-		s5p_reset_hook();
-
-	/* Perform reset using Watchdog reset
-	 * if there is no s5p_reset_hook()
-	 */
-
-	arch_wdt_reset();
-}
diff --git a/arch/arm/plat-s5p/include/plat/usb-phy.h b/arch/arm/plat-s5p/include/plat/usb-phy.h
deleted file mode 100644
index 6dd6bcfca3c..00000000000
--- a/arch/arm/plat-s5p/include/plat/usb-phy.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __PLAT_S5P_USB_PHY_H
-#define __PLAT_S5P_USB_PHY_H
-
-enum s5p_usb_phy_type {
-	S5P_USB_PHY_DEVICE,
-	S5P_USB_PHY_HOST,
-};
-
-extern int s5p_usb_phy_init(struct platform_device *pdev, int type);
-extern int s5p_usb_phy_exit(struct platform_device *pdev, int type);
-
-#endif /* __PLAT_S5P_REGS_USB_PHY_H */
diff --git a/arch/arm/plat-samsung/include/plat/camport.h b/arch/arm/plat-samsung/include/plat/camport.h
new file mode 100644
index 00000000000..a5708bf84b3
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/camport.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ *
+ * S5P series camera interface helper functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PLAT_SAMSUNG_CAMPORT_H_
+#define __PLAT_SAMSUNG_CAMPORT_H_ __FILE__
+
+enum s5p_camport_id {
+	S5P_CAMPORT_A,
+	S5P_CAMPORT_B,
+};
+
+/*
+ * The helper functions to configure GPIO for the camera parallel bus.
+ * The camera port can be multiplexed with any FIMC entity, even multiple
+ * FIMC entities are allowed to be attached to a single port simultaneously.
+ * These functions are to be used in the board setup code.
+ */
+int s5pv210_fimc_setup_gpio(enum s5p_camport_id id);
+int exynos4_fimc_setup_gpio(enum s5p_camport_id id);
+
+#endif /* __PLAT_SAMSUNG_CAMPORT_H */
diff --git a/arch/arm/plat-samsung/include/plat/ehci.h b/arch/arm/plat-samsung/include/plat/ehci.h
new file mode 100644
index 00000000000..5f28cae1858
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/ehci.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PLAT_SAMSUNG_EHCI_H
+#define __PLAT_SAMSUNG_EHCI_H __FILE__
+
+struct s5p_ehci_platdata {
+	int (*phy_init)(struct platform_device *pdev, int type);
+	int (*phy_exit)(struct platform_device *pdev, int type);
+};
+
+extern void s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd);
+
+#endif /* __PLAT_SAMSUNG_EHCI_H */
diff --git a/arch/arm/plat-samsung/include/plat/irqs.h b/arch/arm/plat-samsung/include/plat/irqs.h
new file mode 100644
index 00000000000..94ecf8c5c85
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/irqs.h
@@ -0,0 +1,115 @@
+/* linux/arch/arm/plat-samsung/include/plat/irqs.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P Common IRQ support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_SAMSUNG_IRQS_H
+#define __PLAT_SAMSUNG_IRQS_H __FILE__
+
+/* we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ *
+ * note, since we're using the VICs, our start must be a
+ * mulitple of 32 to allow the common code to work
+ */
+
+#define S5P_IRQ_OFFSET		(32)
+
+#define S5P_IRQ(x)		((x) + S5P_IRQ_OFFSET)
+
+#define S5P_VIC0_BASE		S5P_IRQ(0)
+#define S5P_VIC1_BASE		S5P_IRQ(32)
+#define S5P_VIC2_BASE		S5P_IRQ(64)
+#define S5P_VIC3_BASE		S5P_IRQ(96)
+
+#define VIC_BASE(x)		(S5P_VIC0_BASE + ((x)*32))
+
+#define IRQ_VIC0_BASE		S5P_VIC0_BASE
+#define IRQ_VIC1_BASE		S5P_VIC1_BASE
+#define IRQ_VIC2_BASE		S5P_VIC2_BASE
+
+/* UART interrupts, each UART has 4 intterupts per channel so
+ * use the space between the ISA and S3C main interrupts. Note, these
+ * are not in the same order as the S3C24XX series! */
+
+#define IRQ_S5P_UART_BASE0	(16)
+#define IRQ_S5P_UART_BASE1	(20)
+#define IRQ_S5P_UART_BASE2	(24)
+#define IRQ_S5P_UART_BASE3	(28)
+
+#define UART_IRQ_RXD		(0)
+#define UART_IRQ_ERR		(1)
+#define UART_IRQ_TXD		(2)
+
+#define IRQ_S5P_UART_RX0	(IRQ_S5P_UART_BASE0 + UART_IRQ_RXD)
+#define IRQ_S5P_UART_TX0	(IRQ_S5P_UART_BASE0 + UART_IRQ_TXD)
+#define IRQ_S5P_UART_ERR0	(IRQ_S5P_UART_BASE0 + UART_IRQ_ERR)
+
+#define IRQ_S5P_UART_RX1	(IRQ_S5P_UART_BASE1 + UART_IRQ_RXD)
+#define IRQ_S5P_UART_TX1	(IRQ_S5P_UART_BASE1 + UART_IRQ_TXD)
+#define IRQ_S5P_UART_ERR1	(IRQ_S5P_UART_BASE1 + UART_IRQ_ERR)
+
+#define IRQ_S5P_UART_RX2	(IRQ_S5P_UART_BASE2 + UART_IRQ_RXD)
+#define IRQ_S5P_UART_TX2	(IRQ_S5P_UART_BASE2 + UART_IRQ_TXD)
+#define IRQ_S5P_UART_ERR2	(IRQ_S5P_UART_BASE2 + UART_IRQ_ERR)
+
+#define IRQ_S5P_UART_RX3	(IRQ_S5P_UART_BASE3 + UART_IRQ_RXD)
+#define IRQ_S5P_UART_TX3	(IRQ_S5P_UART_BASE3 + UART_IRQ_TXD)
+#define IRQ_S5P_UART_ERR3	(IRQ_S5P_UART_BASE3 + UART_IRQ_ERR)
+
+/* S3C compatibilty defines */
+#define IRQ_S3CUART_RX0		IRQ_S5P_UART_RX0
+#define IRQ_S3CUART_RX1		IRQ_S5P_UART_RX1
+#define IRQ_S3CUART_RX2		IRQ_S5P_UART_RX2
+#define IRQ_S3CUART_RX3		IRQ_S5P_UART_RX3
+
+/* VIC based IRQs */
+
+#define S5P_IRQ_VIC0(x)		(S5P_VIC0_BASE + (x))
+#define S5P_IRQ_VIC1(x)		(S5P_VIC1_BASE + (x))
+#define S5P_IRQ_VIC2(x)		(S5P_VIC2_BASE + (x))
+#define S5P_IRQ_VIC3(x)		(S5P_VIC3_BASE + (x))
+
+#define S5P_TIMER_IRQ(x)	(11 + (x))
+
+#define IRQ_TIMER0		S5P_TIMER_IRQ(0)
+#define IRQ_TIMER1		S5P_TIMER_IRQ(1)
+#define IRQ_TIMER2		S5P_TIMER_IRQ(2)
+#define IRQ_TIMER3		S5P_TIMER_IRQ(3)
+#define IRQ_TIMER4		S5P_TIMER_IRQ(4)
+
+#define IRQ_EINT(x)		((x) < 16 ? ((x) + S5P_EINT_BASE1) \
+					: ((x) - 16 + S5P_EINT_BASE2))
+
+#define EINT_OFFSET(irq)	((irq) < S5P_EINT_BASE2 ? \
+						((irq) - S5P_EINT_BASE1) : \
+						((irq) + 16 - S5P_EINT_BASE2))
+
+#define IRQ_EINT_BIT(x)		EINT_OFFSET(x)
+
+/* Typically only a few gpio chips require gpio interrupt support.
+   To avoid memory waste irq descriptors are allocated only for
+   S5P_GPIOINT_GROUP_COUNT chips, each with total number of
+   S5P_GPIOINT_GROUP_SIZE pins/irqs. Each GPIOINT group can be assiged
+   to any gpio chip with the s5p_register_gpio_interrupt() function */
+#define S5P_GPIOINT_GROUP_COUNT 4
+#define S5P_GPIOINT_GROUP_SIZE	8
+#define S5P_GPIOINT_COUNT	(S5P_GPIOINT_GROUP_COUNT * S5P_GPIOINT_GROUP_SIZE)
+
+/* IRQ types common for all s5p platforms */
+#define S5P_IRQ_TYPE_LEVEL_LOW		(0x00)
+#define S5P_IRQ_TYPE_LEVEL_HIGH		(0x01)
+#define S5P_IRQ_TYPE_EDGE_FALLING	(0x02)
+#define S5P_IRQ_TYPE_EDGE_RISING	(0x03)
+#define S5P_IRQ_TYPE_EDGE_BOTH		(0x04)
+
+#endif /* __PLAT_SAMSUNG_IRQS_H */
diff --git a/arch/arm/plat-samsung/include/plat/mfc.h b/arch/arm/plat-samsung/include/plat/mfc.h
new file mode 100644
index 00000000000..ac13227272f
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/mfc.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PLAT_SAMSUNG_MFC_H
+#define __PLAT_SAMSUNG_MFC_H __FILE__
+
+/**
+ * s5p_mfc_reserve_mem - function to early reserve memory for MFC driver
+ * @rbase:	base address for MFC 'right' memory interface
+ * @rsize:	size of the memory reserved for MFC 'right' interface
+ * @lbase:	base address for MFC 'left' memory interface
+ * @lsize:	size of the memory reserved for MFC 'left' interface
+ *
+ * This function reserves system memory for both MFC device memory
+ * interfaces and registers it to respective struct device entries as
+ * coherent memory.
+ */
+void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
+				phys_addr_t lbase, unsigned int lsize);
+
+#endif /* __PLAT_SAMSUNG_MFC_H */
diff --git a/arch/arm/plat-samsung/include/plat/mipi_csis.h b/arch/arm/plat-samsung/include/plat/mipi_csis.h
new file mode 100644
index 00000000000..c45b1e8d4c2
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/mipi_csis.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd.
+ *
+ * S5P series MIPI CSI slave device support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PLAT_SAMSUNG_MIPI_CSIS_H_
+#define __PLAT_SAMSUNG_MIPI_CSIS_H_ __FILE__
+
+struct platform_device;
+
+/**
+ * struct s5p_platform_mipi_csis - platform data for S5P MIPI-CSIS driver
+ * @clk_rate: bus clock frequency
+ * @lanes: number of data lanes used
+ * @alignment: data alignment in bits
+ * @hs_settle: HS-RX settle time
+ * @fixed_phy_vdd: false to enable external D-PHY regulator management in the
+ *		   driver or true in case this regulator has no enable function
+ * @phy_enable: pointer to a callback controlling D-PHY enable/reset
+ */
+struct s5p_platform_mipi_csis {
+	unsigned long clk_rate;
+	u8 lanes;
+	u8 alignment;
+	u8 hs_settle;
+	bool fixed_phy_vdd;
+	int (*phy_enable)(struct platform_device *pdev, bool on);
+};
+
+/**
+ * s5p_csis_phy_enable - global MIPI-CSI receiver D-PHY control
+ * @pdev: MIPI-CSIS platform device
+ * @on: true to enable D-PHY and deassert its reset
+ *	false to disable D-PHY
+ */
+int s5p_csis_phy_enable(struct platform_device *pdev, bool on);
+
+#endif /* __PLAT_SAMSUNG_MIPI_CSIS_H_ */
diff --git a/arch/arm/plat-samsung/include/plat/regs-srom.h b/arch/arm/plat-samsung/include/plat/regs-srom.h
new file mode 100644
index 00000000000..9b6729c81cd
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/regs-srom.h
@@ -0,0 +1,54 @@
+/* linux/arch/arm/plat-samsung/include/plat/regs-srom.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P SROMC register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_SAMSUNG_REGS_SROM_H
+#define __PLAT_SAMSUNG_REGS_SROM_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_SROMREG(x)		(S5P_VA_SROMC + (x))
+
+#define S5P_SROM_BW		S5P_SROMREG(0x0)
+#define S5P_SROM_BC0		S5P_SROMREG(0x4)
+#define S5P_SROM_BC1		S5P_SROMREG(0x8)
+#define S5P_SROM_BC2		S5P_SROMREG(0xc)
+#define S5P_SROM_BC3		S5P_SROMREG(0x10)
+#define S5P_SROM_BC4		S5P_SROMREG(0x14)
+#define S5P_SROM_BC5		S5P_SROMREG(0x18)
+
+/* one register BW holds 4 x 4-bit packed settings for NCS0 - NCS3 */
+
+#define S5P_SROM_BW__DATAWIDTH__SHIFT		0
+#define S5P_SROM_BW__ADDRMODE__SHIFT		1
+#define S5P_SROM_BW__WAITENABLE__SHIFT		2
+#define S5P_SROM_BW__BYTEENABLE__SHIFT		3
+
+#define S5P_SROM_BW__CS_MASK			0xf
+
+#define S5P_SROM_BW__NCS0__SHIFT		0
+#define S5P_SROM_BW__NCS1__SHIFT		4
+#define S5P_SROM_BW__NCS2__SHIFT		8
+#define S5P_SROM_BW__NCS3__SHIFT		12
+#define S5P_SROM_BW__NCS4__SHIFT		16
+#define S5P_SROM_BW__NCS5__SHIFT		20
+
+/* applies to same to BCS0 - BCS3 */
+
+#define S5P_SROM_BCX__PMC__SHIFT		0
+#define S5P_SROM_BCX__TACP__SHIFT		4
+#define S5P_SROM_BCX__TCAH__SHIFT		8
+#define S5P_SROM_BCX__TCOH__SHIFT		12
+#define S5P_SROM_BCX__TACC__SHIFT		16
+#define S5P_SROM_BCX__TCOS__SHIFT		24
+#define S5P_SROM_BCX__TACS__SHIFT		28
+
+#endif /* __PLAT_SAMSUNG_REGS_SROM_H */
diff --git a/arch/arm/plat-samsung/include/plat/reset.h b/arch/arm/plat-samsung/include/plat/reset.h
new file mode 100644
index 00000000000..32ca5179c6e
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/reset.h
@@ -0,0 +1,16 @@
+/* linux/arch/arm/plat-samsung/include/plat/reset.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_SAMSUNG_RESET_H
+#define __PLAT_SAMSUNG_RESET_H __FILE__
+
+extern void (*s5p_reset_hook)(void);
+
+#endif /* __PLAT_SAMSUNG_RESET_H */
diff --git a/arch/arm/plat-samsung/include/plat/s5p-clock.h b/arch/arm/plat-samsung/include/plat/s5p-clock.h
new file mode 100644
index 00000000000..984bf9e7bc8
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/s5p-clock.h
@@ -0,0 +1,55 @@
+/* linux/arch/arm/plat-samsung/include/plat/s5p-clock.h
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Header file for s5p clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_S5P_CLOCK_H
+#define __ASM_PLAT_S5P_CLOCK_H __FILE__
+
+#include <linux/clk.h>
+
+#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
+
+#define clk_fin_apll clk_ext_xtal_mux
+#define clk_fin_mpll clk_ext_xtal_mux
+#define clk_fin_epll clk_ext_xtal_mux
+#define clk_fin_dpll clk_ext_xtal_mux
+#define clk_fin_vpll clk_ext_xtal_mux
+#define clk_fin_hpll clk_ext_xtal_mux
+
+extern struct clk clk_ext_xtal_mux;
+extern struct clk clk_xusbxti;
+extern struct clk clk_48m;
+extern struct clk s5p_clk_27m;
+extern struct clk clk_fout_apll;
+extern struct clk clk_fout_mpll;
+extern struct clk clk_fout_epll;
+extern struct clk clk_fout_dpll;
+extern struct clk clk_fout_vpll;
+extern struct clk clk_arm;
+extern struct clk clk_vpll;
+
+extern struct clksrc_sources clk_src_apll;
+extern struct clksrc_sources clk_src_mpll;
+extern struct clksrc_sources clk_src_epll;
+extern struct clksrc_sources clk_src_dpll;
+
+extern int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable);
+
+/* Common EPLL operations for S5P platform */
+extern int s5p_epll_enable(struct clk *clk, int enable);
+extern unsigned long s5p_epll_get_rate(struct clk *clk);
+
+/* SPDIF clk operations common for S5PC100/V210/C110 and Exynos4 */
+extern int s5p_spdif_set_rate(struct clk *clk, unsigned long rate);
+extern unsigned long s5p_spdif_get_rate(struct clk *clk);
+
+extern struct clk_ops s5p_sclk_spdif_ops;
+#endif /* __ASM_PLAT_S5P_CLOCK_H */
diff --git a/arch/arm/plat-samsung/include/plat/s5p-time.h b/arch/arm/plat-samsung/include/plat/s5p-time.h
new file mode 100644
index 00000000000..3a70aebc920
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/s5p-time.h
@@ -0,0 +1,40 @@
+/* linux/arch/arm/plat-samsung/include/plat/s5p-time.h
+ *
+ * Copyright 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Header file for s5p time support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_S5P_TIME_H
+#define __ASM_PLAT_S5P_TIME_H __FILE__
+
+/* S5P HR-Timer Clock mode */
+enum s5p_timer_mode {
+	S5P_PWM0,
+	S5P_PWM1,
+	S5P_PWM2,
+	S5P_PWM3,
+	S5P_PWM4,
+};
+
+struct s5p_timer_source {
+	unsigned int event_id;
+	unsigned int source_id;
+};
+
+/* Be able to sleep for atleast 4 seconds (usually more) */
+#define S5PTIMER_MIN_RANGE	4
+
+#define TCNT_MAX		0xffffffff
+#define NON_PERIODIC		0
+#define PERIODIC		1
+
+extern void __init s5p_set_timer_source(enum s5p_timer_mode event,
+					enum s5p_timer_mode source);
+extern	struct sys_timer s5p_timer;
+#endif /* __ASM_PLAT_S5P_TIME_H */
diff --git a/arch/arm/plat-samsung/include/plat/sysmmu.h b/arch/arm/plat-samsung/include/plat/sysmmu.h
new file mode 100644
index 00000000000..5fe8ee01a5b
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/sysmmu.h
@@ -0,0 +1,95 @@
+/* linux/arch/arm/plat-samsung/include/plat/sysmmu.h
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung System MMU driver for S5P platform
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_SAMSUNG_SYSMMU_H
+#define __PLAT_SAMSUNG_SYSMMU_H __FILE__
+
+enum S5P_SYSMMU_INTERRUPT_TYPE {
+	SYSMMU_PAGEFAULT,
+	SYSMMU_AR_MULTIHIT,
+	SYSMMU_AW_MULTIHIT,
+	SYSMMU_BUSERROR,
+	SYSMMU_AR_SECURITY,
+	SYSMMU_AR_ACCESS,
+	SYSMMU_AW_SECURITY,
+	SYSMMU_AW_PROTECTION, /* 7 */
+	SYSMMU_FAULTS_NUM
+};
+
+#ifdef CONFIG_S5P_SYSTEM_MMU
+
+#include <mach/sysmmu.h>
+
+/**
+ * s5p_sysmmu_enable() - enable system mmu of ip
+ * @ips: The ip connected system mmu.
+ * #pgd: Base physical address of the 1st level page table
+ *
+ * This function enable system mmu to transfer address
+ * from virtual address to physical address
+ */
+void s5p_sysmmu_enable(sysmmu_ips ips, unsigned long pgd);
+
+/**
+ * s5p_sysmmu_disable() - disable sysmmu mmu of ip
+ * @ips: The ip connected system mmu.
+ *
+ * This function disable system mmu to transfer address
+ * from virtual address to physical address
+ */
+void s5p_sysmmu_disable(sysmmu_ips ips);
+
+/**
+ * s5p_sysmmu_set_tablebase_pgd() - set page table base address to refer page table
+ * @ips: The ip connected system mmu.
+ * @pgd: The page table base address.
+ *
+ * This function set page table base address
+ * When system mmu transfer address from virtaul address to physical address,
+ * system mmu refer address information from page table
+ */
+void s5p_sysmmu_set_tablebase_pgd(sysmmu_ips ips, unsigned long pgd);
+
+/**
+ * s5p_sysmmu_tlb_invalidate() - flush all TLB entry in system mmu
+ * @ips: The ip connected system mmu.
+ *
+ * This function flush all TLB entry in system mmu
+ */
+void s5p_sysmmu_tlb_invalidate(sysmmu_ips ips);
+
+/** s5p_sysmmu_set_fault_handler() - Fault handler for System MMUs
+ * @itype: type of fault.
+ * @pgtable_base: the physical address of page table base. This is 0 if @ips is
+ *               SYSMMU_BUSERROR.
+ * @fault_addr: the device (virtual) address that the System MMU tried to
+ *             translated. This is 0 if @ips is SYSMMU_BUSERROR.
+ * Called when interrupt occurred by the System MMUs
+ * The device drivers of peripheral devices that has a System MMU can implement
+ * a fault handler to resolve address translation fault by System MMU.
+ * The meanings of return value and parameters are described below.
+
+ * return value: non-zero if the fault is correctly resolved.
+ *         zero if the fault is not handled.
+ */
+void s5p_sysmmu_set_fault_handler(sysmmu_ips ips,
+			int (*handler)(enum S5P_SYSMMU_INTERRUPT_TYPE itype,
+					unsigned long pgtable_base,
+					unsigned long fault_addr));
+#else
+#define s5p_sysmmu_enable(ips, pgd) do { } while (0)
+#define s5p_sysmmu_disable(ips) do { } while (0)
+#define s5p_sysmmu_set_tablebase_pgd(ips, pgd) do { } while (0)
+#define s5p_sysmmu_tlb_invalidate(ips) do { } while (0)
+#define s5p_sysmmu_set_fault_handler(ips, handler) do { } while (0)
+#endif
+#endif /* __ASM_PLAT_SYSMMU_H */
diff --git a/arch/arm/plat-samsung/include/plat/system-reset.h b/arch/arm/plat-samsung/include/plat/system-reset.h
new file mode 100644
index 00000000000..a448e990964
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/system-reset.h
@@ -0,0 +1,31 @@
+/* linux/arch/arm/plat-samsung/include/plat/system-reset.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/system-reset.h
+ *
+ * S5P - System define for arch_reset()
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/watchdog-reset.h>
+
+void (*s5p_reset_hook)(void);
+
+static void arch_reset(char mode, const char *cmd)
+{
+	/* SWRESET support in s5p_reset_hook() */
+
+	if (s5p_reset_hook)
+		s5p_reset_hook();
+
+	/* Perform reset using Watchdog reset
+	 * if there is no s5p_reset_hook()
+	 */
+
+	arch_wdt_reset();
+}
diff --git a/arch/arm/plat-samsung/include/plat/usb-phy.h b/arch/arm/plat-samsung/include/plat/usb-phy.h
new file mode 100644
index 00000000000..959bcdb03a2
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/usb-phy.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PLAT_SAMSUNG_USB_PHY_H
+#define __PLAT_SAMSUNG_USB_PHY_H __FILE__
+
+enum s5p_usb_phy_type {
+	S5P_USB_PHY_DEVICE,
+	S5P_USB_PHY_HOST,
+};
+
+extern int s5p_usb_phy_init(struct platform_device *pdev, int type);
+extern int s5p_usb_phy_exit(struct platform_device *pdev, int type);
+
+#endif /* __PLAT_SAMSUNG_USB_PHY_H */
-- 
cgit v1.2.3-18-g5258


From 0da3beadcbed2128702831c9fe106ea23e194b3f Mon Sep 17 00:00:00 2001
From: Abhilash Kesavan <a.kesavan@samsung.com>
Date: Tue, 4 Oct 2011 20:25:51 +0900
Subject: ARM: S5P: Make the common S5P PM code conditionally compile

Pave the way for adding PM support on S5P64X0, which is more similar
to the S3C64XX series than the S5P series. Hence, the common pm code
(containing dummy functions) should not be used for S5P64X0.

Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/Kconfig | 2 ++
 arch/arm/mach-s5pv210/Kconfig | 1 +
 arch/arm/plat-s5p/Kconfig     | 6 ++++++
 arch/arm/plat-s5p/Makefile    | 3 +--
 4 files changed, 10 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index 2dad16c8cf7..43ccbb0bf41 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -12,11 +12,13 @@ if ARCH_EXYNOS4
 config CPU_EXYNOS4210
 	bool
 	select SAMSUNG_DMADEV
+	select S5P_PM if PM
 	help
 	  Enable EXYNOS4210 CPU support
 
 config SOC_EXYNOS4212
 	bool
+	select S5P_PM if PM
 	help
 	  Enable EXYNOS4212 SoC support
 
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index f22c683272d..34b772a9932 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -14,6 +14,7 @@ config CPU_S5PV210
 	select SAMSUNG_DMADEV
 	select S5P_EXT_INT
 	select S5P_HRT
+	select S5P_PM if PM
 	help
 	  Enable S5PV210 CPU support
 
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index f9241a7a68c..53e674348b3 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -40,6 +40,12 @@ config S5P_HRT
 	help
 	  Use the High Resolution timer support
 
+config S5P_PM
+	bool
+	help
+	  Common code for power management support on S5P and newer SoCs
+	  Note: Do not select this for S5P6440 and S5P6450.
+
 comment "System MMU"
 
 config S5P_SYSTEM_MMU
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
index 181201974b4..755d7ac4384 100644
--- a/arch/arm/plat-s5p/Makefile
+++ b/arch/arm/plat-s5p/Makefile
@@ -20,8 +20,7 @@ obj-y				+= irq.o
 obj-$(CONFIG_S5P_EXT_INT)	+= irq-eint.o
 obj-$(CONFIG_S5P_GPIO_INT)	+= irq-gpioint.o
 obj-$(CONFIG_S5P_SYSTEM_MMU)	+= sysmmu.o
-obj-$(CONFIG_PM)		+= pm.o
-obj-$(CONFIG_PM)		+= irq-pm.o
+obj-$(CONFIG_S5P_PM)		+= pm.o irq-pm.o
 obj-$(CONFIG_S5P_HRT) 		+= s5p-time.o
 
 # devices
-- 
cgit v1.2.3-18-g5258


From e2e13621b267f88f69917780e107725d2c0ecad9 Mon Sep 17 00:00:00 2001
From: Abhilash Kesavan <a.kesavan@samsung.com>
Date: Tue, 4 Oct 2011 20:25:51 +0900
Subject: ARM: S5P: Make the sleep code common for S5P series SoCs

The sleep code for S5PV210 and EXYNOS4 are identical; moreover
S5p64X0 and S5PC100 for which support will be added soon can
use the same procedure. Create a common sleep code in the plat-s5p
directory so that it can be re-used.

Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/Kconfig  |  2 ++
 arch/arm/mach-exynos4/Makefile |  2 +-
 arch/arm/mach-exynos4/sleep.S  | 54 ------------------------------------------
 arch/arm/mach-s5pv210/Kconfig  |  1 +
 arch/arm/mach-s5pv210/Makefile |  2 +-
 arch/arm/mach-s5pv210/sleep.S  | 52 ----------------------------------------
 arch/arm/plat-s5p/Kconfig      |  6 +++++
 arch/arm/plat-s5p/Makefile     |  1 +
 arch/arm/plat-s5p/sleep.S      | 49 ++++++++++++++++++++++++++++++++++++++
 9 files changed, 61 insertions(+), 108 deletions(-)
 delete mode 100644 arch/arm/mach-exynos4/sleep.S
 delete mode 100644 arch/arm/mach-s5pv210/sleep.S
 create mode 100644 arch/arm/plat-s5p/sleep.S

(limited to 'arch')

diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index 43ccbb0bf41..dd660eb2020 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -13,12 +13,14 @@ config CPU_EXYNOS4210
 	bool
 	select SAMSUNG_DMADEV
 	select S5P_PM if PM
+	select S5P_SLEEP if PM
 	help
 	  Enable EXYNOS4210 CPU support
 
 config SOC_EXYNOS4212
 	bool
 	select S5P_PM if PM
+	select S5P_SLEEP if PM
 	help
 	  Enable EXYNOS4212 SoC support
 
diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile
index c9b2e1f97e4..2bb18f431db 100644
--- a/arch/arm/mach-exynos4/Makefile
+++ b/arch/arm/mach-exynos4/Makefile
@@ -16,7 +16,7 @@ obj-$(CONFIG_ARCH_EXYNOS4)	+= cpu.o init.o clock.o irq-combiner.o
 obj-$(CONFIG_ARCH_EXYNOS4)	+= setup-i2c0.o irq-eint.o dma.o pmu.o
 obj-$(CONFIG_CPU_EXYNOS4210)	+= clock-exynos4210.o
 obj-$(CONFIG_SOC_EXYNOS4212)	+= clock-exynos4212.o
-obj-$(CONFIG_PM)		+= pm.o sleep.o
+obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
diff --git a/arch/arm/mach-exynos4/sleep.S b/arch/arm/mach-exynos4/sleep.S
deleted file mode 100644
index 0984078f1eb..00000000000
--- a/arch/arm/mach-exynos4/sleep.S
+++ /dev/null
@@ -1,54 +0,0 @@
-/* linux/arch/arm/mach-exynos4/sleep.S
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4210 power Manager (Suspend-To-RAM) support
- * Based on S3C2410 sleep code by:
- *	Ben Dooks, (c) 2004 Simtec Electronics
- *
- * Based on PXA/SA1100 sleep code by:
- *	Nicolas Pitre, (c) 2002 Monta Vista Software Inc
- *	Cliff Brake, (c) 2001
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/memory.h>
-
-	.text
-
-	/*
-	 * sleep magic, to allow the bootloader to check for an valid
-	 * image to resume to. Must be the first word before the
-	 * s3c_cpu_resume entry.
-	 */
-
-	.word	0x2bedf00d
-
-	/*
-	 * s3c_cpu_resume
-	 *
-	 * resume code entry for bootloader to call
-	 *
-	 * we must put this code here in the data segment as we have no
-	 * other way of restoring the stack pointer after sleep, and we
-	 * must not write to the code segment (code is read-only)
-	 */
-
-ENTRY(s3c_cpu_resume)
-	b	cpu_resume
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 34b772a9932..646057ab2e4 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -15,6 +15,7 @@ config CPU_S5PV210
 	select S5P_EXT_INT
 	select S5P_HRT
 	select S5P_PM if PM
+	select S5P_SLEEP if PM
 	help
 	  Enable S5PV210 CPU support
 
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
index ef7e4668d67..009fbe53df9 100644
--- a/arch/arm/mach-s5pv210/Makefile
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -14,7 +14,7 @@ obj-				:=
 
 obj-$(CONFIG_CPU_S5PV210)	+= cpu.o init.o clock.o dma.o
 obj-$(CONFIG_CPU_S5PV210)	+= setup-i2c0.o
-obj-$(CONFIG_PM)		+= pm.o sleep.o
+obj-$(CONFIG_PM)		+= pm.o
 
 # machine support
 
diff --git a/arch/arm/mach-s5pv210/sleep.S b/arch/arm/mach-s5pv210/sleep.S
deleted file mode 100644
index e3452ccd4b0..00000000000
--- a/arch/arm/mach-s5pv210/sleep.S
+++ /dev/null
@@ -1,52 +0,0 @@
-/* linux/arch/arm/plat-s5p/sleep.S
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5PV210 power Manager (Suspend-To-RAM) support
- * Based on S3C2410 sleep code by:
- * 	Ben Dooks, (c) 2004 Simtec Electronics
- *
- * Based on PXA/SA1100 sleep code by:
- *	Nicolas Pitre, (c) 2002 Monta Vista Software Inc
- *	Cliff Brake, (c) 2001
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/memory.h>
-
-	.text
-
-	/* sleep magic, to allow the bootloader to check for an valid
-	 * image to resume to. Must be the first word before the
-	 * s3c_cpu_resume entry.
-	*/
-
-	.word	0x2bedf00d
-
-	/* s3c_cpu_resume
-	 *
-	 * resume code entry for bootloader to call
-	 *
-	 * we must put this code here in the data segment as we have no
-	 * other way of restoring the stack pointer after sleep, and we
-	 * must not write to the code segment (code is read-only)
-	*/
-
-ENTRY(s3c_cpu_resume)
-	b	cpu_resume
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index 53e674348b3..7b9dadadb0a 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -54,6 +54,12 @@ config S5P_SYSTEM_MMU
 	help
 	  Say Y here if you want to enable System MMU
 
+config S5P_SLEEP
+	bool
+	help
+	  Internal config node to apply common S5P sleep management code.
+	  Can be selected by S5P and newer SoCs with similar sleep procedure.
+
 config S5P_DEV_FIMC0
 	bool
 	help
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
index 755d7ac4384..06401dc37b8 100644
--- a/arch/arm/plat-s5p/Makefile
+++ b/arch/arm/plat-s5p/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_S5P_EXT_INT)	+= irq-eint.o
 obj-$(CONFIG_S5P_GPIO_INT)	+= irq-gpioint.o
 obj-$(CONFIG_S5P_SYSTEM_MMU)	+= sysmmu.o
 obj-$(CONFIG_S5P_PM)		+= pm.o irq-pm.o
+obj-$(CONFIG_S5P_SLEEP)		+= sleep.o
 obj-$(CONFIG_S5P_HRT) 		+= s5p-time.o
 
 # devices
diff --git a/arch/arm/plat-s5p/sleep.S b/arch/arm/plat-s5p/sleep.S
new file mode 100644
index 00000000000..0fd591bfc9f
--- /dev/null
+++ b/arch/arm/plat-s5p/sleep.S
@@ -0,0 +1,49 @@
+/* linux/arch/arm/plat-s5p/sleep.S
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Common S5P Sleep Code
+ * Based on S3C64XX sleep code by:
+ *	Ben Dooks, (c) 2008 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+	.text
+
+	/*
+	 * sleep magic, to allow the bootloader to check for an valid
+	 * image to resume to. Must be the first word before the
+	 * s3c_cpu_resume entry.
+	 */
+
+	.word	0x2bedf00d
+
+	/*
+	 * s3c_cpu_resume
+	 *
+	 * resume code entry for bootloader to call
+	 *
+	 * we must put this code here in the data segment as we have no
+	 * other way of restoring the stack pointer after sleep, and we
+	 * must not write to the code segment (code is read-only)
+	 */
+
+ENTRY(s3c_cpu_resume)
+	b	cpu_resume
-- 
cgit v1.2.3-18-g5258


From 6b6844dd54e4196dd9818bc63b319f93c37a08be Mon Sep 17 00:00:00 2001
From: Abhilash Kesavan <a.kesavan@samsung.com>
Date: Tue, 4 Oct 2011 20:30:22 +0900
Subject: ARM: S5P64X0: Add Power Management support

Add suspend-to-ram support for SMDK6440/50

Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/Kconfig                                |   2 +-
 arch/arm/mach-s5p64x0/Kconfig                   |   4 +
 arch/arm/mach-s5p64x0/Makefile                  |   1 +
 arch/arm/mach-s5p64x0/include/mach/map.h        |   1 +
 arch/arm/mach-s5p64x0/include/mach/pm-core.h    | 117 ++++++++++++++
 arch/arm/mach-s5p64x0/include/mach/regs-clock.h |  33 ++++
 arch/arm/mach-s5p64x0/include/mach/regs-gpio.h  |  17 ++
 arch/arm/mach-s5p64x0/irq-eint.c                |   2 +
 arch/arm/mach-s5p64x0/irq-pm.c                  |  92 +++++++++++
 arch/arm/mach-s5p64x0/pm.c                      | 204 ++++++++++++++++++++++++
 10 files changed, 472 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-s5p64x0/include/mach/pm-core.h
 create mode 100644 arch/arm/mach-s5p64x0/irq-pm.c
 create mode 100644 arch/arm/mach-s5p64x0/pm.c

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index bea81d01831..52f1027d9cb 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -2093,7 +2093,7 @@ menu "Power management options"
 source "kernel/power/Kconfig"
 
 config ARCH_SUSPEND_POSSIBLE
-	depends on !ARCH_S5P64X0 && !ARCH_S5PC100
+	depends on !ARCH_S5PC100
 	depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \
 		CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE
 	def_bool y
diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig
index e361c41314e..18690c5f99e 100644
--- a/arch/arm/mach-s5p64x0/Kconfig
+++ b/arch/arm/mach-s5p64x0/Kconfig
@@ -11,6 +11,8 @@ config CPU_S5P6440
 	bool
 	select SAMSUNG_DMADEV
 	select S5P_HRT
+	select S5P_SLEEP if PM
+	select SAMSUNG_WAKEMASK if PM
 	help
 	  Enable S5P6440 CPU support
 
@@ -18,6 +20,8 @@ config CPU_S5P6450
 	bool
 	select SAMSUNG_DMADEV
 	select S5P_HRT
+	select S5P_SLEEP if PM
+	select SAMSUNG_WAKEMASK if PM
 	help
 	  Enable S5P6450 CPU support
 
diff --git a/arch/arm/mach-s5p64x0/Makefile b/arch/arm/mach-s5p64x0/Makefile
index eb7468012a3..a1324d8dc4e 100644
--- a/arch/arm/mach-s5p64x0/Makefile
+++ b/arch/arm/mach-s5p64x0/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_ARCH_S5P64X0)	+= cpu.o init.o clock.o dma.o
 obj-$(CONFIG_ARCH_S5P64X0)	+= setup-i2c0.o irq-eint.o
 obj-$(CONFIG_CPU_S5P6440)	+= clock-s5p6440.o
 obj-$(CONFIG_CPU_S5P6450)	+= clock-s5p6450.o
+obj-$(CONFIG_PM)		+= pm.o irq-pm.o
 
 # machine support
 
diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach-s5p64x0/include/mach/map.h
index c5ef50c2629..4d3ac8a3709 100644
--- a/arch/arm/mach-s5p64x0/include/mach/map.h
+++ b/arch/arm/mach-s5p64x0/include/mach/map.h
@@ -88,5 +88,6 @@
 #define S5P_PA_UART5		S5P6450_PA_UART(5)
 
 #define S5P_SZ_UART		SZ_256
+#define S3C_VA_UARTx(x)		(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
 
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/pm-core.h b/arch/arm/mach-s5p64x0/include/mach/pm-core.h
new file mode 100644
index 00000000000..e52f7545d3a
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/pm-core.h
@@ -0,0 +1,117 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/pm-core.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - PM core support for arch/arm/plat-samsung/pm.c
+ *
+ * Based on PM core support for S3C64XX by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/regs-gpio.h>
+
+static inline void s3c_pm_debug_init_uart(void)
+{
+	u32 tmp = __raw_readl(S5P64X0_CLK_GATE_PCLK);
+
+	/*
+	 * As a note, since the S5P64X0 UARTs generally have multiple
+	 * clock sources, we simply enable PCLK at the moment and hope
+	 * that the resume settings for the UART are suitable for the
+	 * use with PCLK.
+	 */
+	tmp |= S5P64X0_CLK_GATE_PCLK_UART0;
+	tmp |= S5P64X0_CLK_GATE_PCLK_UART1;
+	tmp |= S5P64X0_CLK_GATE_PCLK_UART2;
+	tmp |= S5P64X0_CLK_GATE_PCLK_UART3;
+
+	__raw_writel(tmp, S5P64X0_CLK_GATE_PCLK);
+	udelay(10);
+}
+
+static inline void s3c_pm_arch_prepare_irqs(void)
+{
+	/* VIC should have already been taken care of */
+
+	/* clear any pending EINT0 interrupts */
+	__raw_writel(__raw_readl(S5P64X0_EINT0PEND), S5P64X0_EINT0PEND);
+}
+
+static inline void s3c_pm_arch_stop_clocks(void) { }
+static inline void s3c_pm_arch_show_resume_irqs(void) { }
+
+/*
+ * make these defines, we currently do not have any need to change
+ * the IRQ wake controls depending on the CPU we are running on
+ */
+#define s3c_irqwake_eintallow	((1 << 16) - 1)
+#define s3c_irqwake_intallow	(~0)
+
+static inline void s3c_pm_arch_update_uart(void __iomem *regs,
+					struct pm_uart_save *save)
+{
+	u32 ucon = __raw_readl(regs + S3C2410_UCON);
+	u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK;
+	u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK;
+	u32 new_ucon;
+	u32 delta;
+
+	/*
+	 * S5P64X0 UART blocks only support level interrupts, so ensure that
+	 * when we restore unused UART blocks we force the level interrupt
+	 * settings.
+	 */
+	save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
+
+	/*
+	 * We have a constraint on changing the clock type of the UART
+	 * between UCLKx and PCLK, so ensure that when we restore UCON
+	 * that the CLK field is correctly modified if the bootloader
+	 * has changed anything.
+	 */
+	if (ucon_clk != save_clk) {
+		new_ucon = save->ucon;
+		delta = ucon_clk ^ save_clk;
+
+		/*
+		 * change from UCLKx => wrong PCLK,
+		 * either UCLK can be tested for by a bit-test
+		 * with UCLK0
+		 */
+		if (ucon_clk & S3C6400_UCON_UCLK0 &&
+		!(save_clk & S3C6400_UCON_UCLK0) &&
+		delta & S3C6400_UCON_PCLK2) {
+			new_ucon &= ~S3C6400_UCON_UCLK0;
+		} else if (delta == S3C6400_UCON_PCLK2) {
+			/*
+			 * as a precaution, don't change from
+			 * PCLK2 => PCLK or vice-versa
+			 */
+			new_ucon ^= S3C6400_UCON_PCLK2;
+		}
+
+		S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n",
+			ucon, new_ucon, save->ucon);
+		save->ucon = new_ucon;
+	}
+}
+
+static inline void s3c_pm_restored_gpios(void)
+{
+	/* ensure sleep mode has been cleared from the system */
+	__raw_writel(0, S5P64X0_SLPEN);
+}
+
+static inline void samsung_pm_saved_gpios(void)
+{
+	/*
+	 * turn on the sleep mode and keep it there, as it seems that during
+	 * suspend the xCON registers get re-set and thus you can end up with
+	 * problems between going to sleep and resuming.
+	 */
+	__raw_writel(S5P64X0_SLPEN_USE_xSLP, S5P64X0_SLPEN);
+}
diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-clock.h b/arch/arm/mach-s5p64x0/include/mach/regs-clock.h
index a133f22fa15..bd91112c813 100644
--- a/arch/arm/mach-s5p64x0/include/mach/regs-clock.h
+++ b/arch/arm/mach-s5p64x0/include/mach/regs-clock.h
@@ -41,17 +41,50 @@
 #define S5P6450_DPLL_CON		S5P_CLKREG(0x50)
 #define S5P6450_DPLL_CON_K		S5P_CLKREG(0x54)
 
+#define S5P64X0_AHB_CON0		S5P_CLKREG(0x100)
 #define S5P64X0_CLK_SRC1		S5P_CLKREG(0x10C)
 
 #define S5P64X0_SYS_ID			S5P_CLKREG(0x118)
 #define S5P64X0_SYS_OTHERS		S5P_CLKREG(0x11C)
 
 #define S5P64X0_PWR_CFG			S5P_CLKREG(0x804)
+#define S5P64X0_EINT_WAKEUP_MASK	S5P_CLKREG(0x808)
+#define S5P64X0_SLEEP_CFG		S5P_CLKREG(0x818)
+#define S5P64X0_PWR_STABLE		S5P_CLKREG(0x828)
+
 #define S5P64X0_OTHERS			S5P_CLKREG(0x900)
+#define S5P64X0_WAKEUP_STAT		S5P_CLKREG(0x908)
+
+#define S5P64X0_INFORM0			S5P_CLKREG(0xA00)
 
 #define S5P64X0_CLKDIV0_HCLK_SHIFT	(8)
 #define S5P64X0_CLKDIV0_HCLK_MASK	(0xF << S5P64X0_CLKDIV0_HCLK_SHIFT)
 
+/* HCLK GATE Registers */
+#define S5P64X0_CLK_GATE_HCLK1_FIMGVG	(1 << 2)
+#define S5P64X0_CLK_GATE_SCLK1_FIMGVG	(1 << 2)
+
+/* PCLK GATE Registers */
+#define S5P64X0_CLK_GATE_PCLK_UART3	(1 << 4)
+#define S5P64X0_CLK_GATE_PCLK_UART2	(1 << 3)
+#define S5P64X0_CLK_GATE_PCLK_UART1	(1 << 2)
+#define S5P64X0_CLK_GATE_PCLK_UART0	(1 << 1)
+
+#define S5P64X0_PWR_CFG_MMC1_DISABLE		(1 << 15)
+#define S5P64X0_PWR_CFG_MMC0_DISABLE		(1 << 14)
+#define S5P64X0_PWR_CFG_RTC_TICK_DISABLE	(1 << 11)
+#define S5P64X0_PWR_CFG_RTC_ALRM_DISABLE	(1 << 10)
+#define S5P64X0_PWR_CFG_WFI_MASK		(3 << 5)
+#define S5P64X0_PWR_CFG_WFI_SLEEP		(3 << 5)
+
+#define S5P64X0_SLEEP_CFG_OSC_EN	(1 << 0)
+
+#define S5P64X0_PWR_STABLE_PWR_CNT_VAL4	(4 << 0)
+
+#define S5P6450_OTHERS_DISABLE_INT	(1 << 31)
+#define S5P64X0_OTHERS_RET_UART		(1 << 26)
+#define S5P64X0_OTHERS_RET_MMC1		(1 << 25)
+#define S5P64X0_OTHERS_RET_MMC0		(1 << 24)
 #define S5P64X0_OTHERS_USB_SIG_MASK	(1 << 16)
 
 /* Compatibility defines */
diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
index 88269ec70a3..cfdfa4fdadf 100644
--- a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
@@ -37,15 +37,32 @@
 #define S5P64X0_SPCON0			(S5P_VA_GPIO + 0x1A0)
 #define S5P64X0_SPCON0_LCD_SEL_MASK	(0x3 << 0)
 #define S5P64X0_SPCON0_LCD_SEL_RGB	(0x1 << 0)
+#define S5P64X0_SPCON1			(S5P_VA_GPIO + 0x2B0)
+
+#define S5P64X0_MEM0CONSLP0		(S5P_VA_GPIO + 0x1C0)
+#define S5P64X0_MEM0CONSLP1		(S5P_VA_GPIO + 0x1C4)
+#define S5P64X0_MEM0DRVCON		(S5P_VA_GPIO + 0x1D0)
+#define S5P64X0_MEM1DRVCON		(S5P_VA_GPIO + 0x1D4)
+
+#define S5P64X0_EINT12CON		(S5P_VA_GPIO + 0x200)
+#define S5P64X0_EINT12FLTCON		(S5P_VA_GPIO + 0x220)
+#define S5P64X0_EINT12MASK		(S5P_VA_GPIO + 0x240)
 
 /* External interrupt control registers for group0 */
 
 #define EINT0CON0_OFFSET		(0x900)
+#define EINT0FLTCON0_OFFSET		(0x910)
+#define EINT0FLTCON1_OFFSET		(0x914)
 #define EINT0MASK_OFFSET		(0x920)
 #define EINT0PEND_OFFSET		(0x924)
 
 #define S5P64X0_EINT0CON0		(S5P_VA_GPIO + EINT0CON0_OFFSET)
+#define S5P64X0_EINT0FLTCON0		(S5P_VA_GPIO + EINT0FLTCON0_OFFSET)
+#define S5P64X0_EINT0FLTCON1		(S5P_VA_GPIO + EINT0FLTCON1_OFFSET)
 #define S5P64X0_EINT0MASK		(S5P_VA_GPIO + EINT0MASK_OFFSET)
 #define S5P64X0_EINT0PEND		(S5P_VA_GPIO + EINT0PEND_OFFSET)
 
+#define S5P64X0_SLPEN			(S5P_VA_GPIO + 0x930)
+#define S5P64X0_SLPEN_USE_xSLP		(1 << 0)
+
 #endif /* __ASM_ARCH_REGS_GPIO_H */
diff --git a/arch/arm/mach-s5p64x0/irq-eint.c b/arch/arm/mach-s5p64x0/irq-eint.c
index 494e1a8f6f6..275dc74f4a7 100644
--- a/arch/arm/mach-s5p64x0/irq-eint.c
+++ b/arch/arm/mach-s5p64x0/irq-eint.c
@@ -20,6 +20,7 @@
 #include <plat/cpu.h>
 #include <plat/regs-irqtype.h>
 #include <plat/gpio-cfg.h>
+#include <plat/pm.h>
 
 #include <mach/regs-gpio.h>
 #include <mach/regs-clock.h>
@@ -134,6 +135,7 @@ static int s5p64x0_alloc_gc(void)
 	ct->chip.irq_mask = irq_gc_mask_set_bit;
 	ct->chip.irq_unmask = irq_gc_mask_clr_bit;
 	ct->chip.irq_set_type = s5p64x0_irq_eint_set_type;
+	ct->chip.irq_set_wake = s3c_irqext_wake;
 	ct->regs.ack = EINT0PEND_OFFSET;
 	ct->regs.mask = EINT0MASK_OFFSET;
 	irq_setup_generic_chip(gc, IRQ_MSK(16), IRQ_GC_INIT_MASK_CACHE,
diff --git a/arch/arm/mach-s5p64x0/irq-pm.c b/arch/arm/mach-s5p64x0/irq-pm.c
new file mode 100644
index 00000000000..3e6f2456ee9
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/irq-pm.c
@@ -0,0 +1,92 @@
+/* linux/arch/arm/mach-s5p64x0/irq-pm.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - Interrupt handling Power Management
+ *
+ * Based on arch/arm/mach-s3c64xx/irq-pm.c by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/syscore_ops.h>
+#include <linux/serial_core.h>
+#include <linux/io.h>
+
+#include <plat/regs-serial.h>
+#include <plat/pm.h>
+
+#include <mach/regs-gpio.h>
+
+static struct sleep_save irq_save[] = {
+	SAVE_ITEM(S5P64X0_EINT0CON0),
+	SAVE_ITEM(S5P64X0_EINT0FLTCON0),
+	SAVE_ITEM(S5P64X0_EINT0FLTCON1),
+	SAVE_ITEM(S5P64X0_EINT0MASK),
+};
+
+static struct irq_grp_save {
+	u32	con;
+	u32	fltcon;
+	u32	mask;
+} eint_grp_save[4];
+
+static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS];
+
+static int s5p64x0_irq_pm_suspend(void)
+{
+	struct irq_grp_save *grp = eint_grp_save;
+	int i;
+
+	S3C_PMDBG("%s: suspending IRQs\n", __func__);
+
+	s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
+
+	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
+		irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM);
+
+	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
+		grp->con = __raw_readl(S5P64X0_EINT12CON + (i * 4));
+		grp->mask = __raw_readl(S5P64X0_EINT12MASK + (i * 4));
+		grp->fltcon = __raw_readl(S5P64X0_EINT12FLTCON + (i * 4));
+	}
+
+	return 0;
+}
+
+static void s5p64x0_irq_pm_resume(void)
+{
+	struct irq_grp_save *grp = eint_grp_save;
+	int i;
+
+	S3C_PMDBG("%s: resuming IRQs\n", __func__);
+
+	s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
+
+	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
+		__raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM);
+
+	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
+		__raw_writel(grp->con, S5P64X0_EINT12CON + (i * 4));
+		__raw_writel(grp->mask, S5P64X0_EINT12MASK + (i * 4));
+		__raw_writel(grp->fltcon, S5P64X0_EINT12FLTCON + (i * 4));
+	}
+
+	S3C_PMDBG("%s: IRQ configuration restored\n", __func__);
+}
+
+static struct syscore_ops s5p64x0_irq_syscore_ops = {
+	.suspend = s5p64x0_irq_pm_suspend,
+	.resume  = s5p64x0_irq_pm_resume,
+};
+
+static int __init s5p64x0_syscore_init(void)
+{
+	register_syscore_ops(&s5p64x0_irq_syscore_ops);
+
+	return 0;
+}
+core_initcall(s5p64x0_syscore_init);
diff --git a/arch/arm/mach-s5p64x0/pm.c b/arch/arm/mach-s5p64x0/pm.c
new file mode 100644
index 00000000000..69927243d25
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/pm.c
@@ -0,0 +1,204 @@
+/* linux/arch/arm/mach-s5p64x0/pm.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 Power Management Support
+ *
+ * Based on arch/arm/mach-s3c64xx/pm.c by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/suspend.h>
+#include <linux/syscore_ops.h>
+#include <linux/io.h>
+
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/regs-timer.h>
+#include <plat/wakeup-mask.h>
+
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+
+static struct sleep_save s5p64x0_core_save[] = {
+	SAVE_ITEM(S5P64X0_APLL_CON),
+	SAVE_ITEM(S5P64X0_MPLL_CON),
+	SAVE_ITEM(S5P64X0_EPLL_CON),
+	SAVE_ITEM(S5P64X0_EPLL_CON_K),
+	SAVE_ITEM(S5P64X0_CLK_SRC0),
+	SAVE_ITEM(S5P64X0_CLK_SRC1),
+	SAVE_ITEM(S5P64X0_CLK_DIV0),
+	SAVE_ITEM(S5P64X0_CLK_DIV1),
+	SAVE_ITEM(S5P64X0_CLK_DIV2),
+	SAVE_ITEM(S5P64X0_CLK_DIV3),
+	SAVE_ITEM(S5P64X0_CLK_GATE_MEM0),
+	SAVE_ITEM(S5P64X0_CLK_GATE_HCLK1),
+	SAVE_ITEM(S5P64X0_CLK_GATE_SCLK1),
+};
+
+static struct sleep_save s5p64x0_misc_save[] = {
+	SAVE_ITEM(S5P64X0_AHB_CON0),
+	SAVE_ITEM(S5P64X0_SPCON0),
+	SAVE_ITEM(S5P64X0_SPCON1),
+	SAVE_ITEM(S5P64X0_MEM0CONSLP0),
+	SAVE_ITEM(S5P64X0_MEM0CONSLP1),
+	SAVE_ITEM(S5P64X0_MEM0DRVCON),
+	SAVE_ITEM(S5P64X0_MEM1DRVCON),
+
+	SAVE_ITEM(S3C64XX_TINT_CSTAT),
+};
+
+/* DPLL is present only in S5P6450 */
+static struct sleep_save s5p6450_core_save[] = {
+	SAVE_ITEM(S5P6450_DPLL_CON),
+	SAVE_ITEM(S5P6450_DPLL_CON_K),
+};
+
+void s3c_pm_configure_extint(void)
+{
+	__raw_writel(s3c_irqwake_eintmask, S5P64X0_EINT_WAKEUP_MASK);
+}
+
+void s3c_pm_restore_core(void)
+{
+	__raw_writel(0, S5P64X0_EINT_WAKEUP_MASK);
+
+	s3c_pm_do_restore_core(s5p64x0_core_save,
+				ARRAY_SIZE(s5p64x0_core_save));
+
+	if (soc_is_s5p6450())
+		s3c_pm_do_restore_core(s5p6450_core_save,
+				ARRAY_SIZE(s5p6450_core_save));
+
+	s3c_pm_do_restore(s5p64x0_misc_save, ARRAY_SIZE(s5p64x0_misc_save));
+}
+
+void s3c_pm_save_core(void)
+{
+	s3c_pm_do_save(s5p64x0_misc_save, ARRAY_SIZE(s5p64x0_misc_save));
+
+	if (soc_is_s5p6450())
+		s3c_pm_do_save(s5p6450_core_save,
+				ARRAY_SIZE(s5p6450_core_save));
+
+	s3c_pm_do_save(s5p64x0_core_save, ARRAY_SIZE(s5p64x0_core_save));
+}
+
+static int s5p64x0_cpu_suspend(unsigned long arg)
+{
+	unsigned long tmp = 0;
+
+	/*
+	 * Issue the standby signal into the pm unit. Note, we
+	 * issue a write-buffer drain just in case.
+	 */
+	asm("b 1f\n\t"
+	    ".align 5\n\t"
+	    "1:\n\t"
+	    "mcr p15, 0, %0, c7, c10, 5\n\t"
+	    "mcr p15, 0, %0, c7, c10, 4\n\t"
+	    "mcr p15, 0, %0, c7, c0, 4" : : "r" (tmp));
+
+	/* we should never get past here */
+	panic("sleep resumed to originator?");
+}
+
+/* mapping of interrupts to parts of the wakeup mask */
+static struct samsung_wakeup_mask s5p64x0_wake_irqs[] = {
+	{ .irq = IRQ_RTC_ALARM,	.bit = S5P64X0_PWR_CFG_RTC_ALRM_DISABLE, },
+	{ .irq = IRQ_RTC_TIC,	.bit = S5P64X0_PWR_CFG_RTC_TICK_DISABLE, },
+	{ .irq = IRQ_HSMMC0,	.bit = S5P64X0_PWR_CFG_MMC0_DISABLE, },
+	{ .irq = IRQ_HSMMC1,	.bit = S5P64X0_PWR_CFG_MMC1_DISABLE, },
+};
+
+static void s5p64x0_pm_prepare(void)
+{
+	u32 tmp;
+
+	samsung_sync_wakemask(S5P64X0_PWR_CFG,
+			s5p64x0_wake_irqs, ARRAY_SIZE(s5p64x0_wake_irqs));
+
+	/* store the resume address in INFORM0 register */
+	__raw_writel(virt_to_phys(s3c_cpu_resume), S5P64X0_INFORM0);
+
+	/* setup clock gating for FIMGVG block */
+	__raw_writel((__raw_readl(S5P64X0_CLK_GATE_HCLK1) | \
+		(S5P64X0_CLK_GATE_HCLK1_FIMGVG)), S5P64X0_CLK_GATE_HCLK1);
+	__raw_writel((__raw_readl(S5P64X0_CLK_GATE_SCLK1) | \
+		(S5P64X0_CLK_GATE_SCLK1_FIMGVG)), S5P64X0_CLK_GATE_SCLK1);
+
+	/* Configure the stabilization counter with wait time required */
+	__raw_writel(S5P64X0_PWR_STABLE_PWR_CNT_VAL4, S5P64X0_PWR_STABLE);
+
+	/* set WFI to SLEEP mode configuration */
+	tmp = __raw_readl(S5P64X0_SLEEP_CFG);
+	tmp &= ~(S5P64X0_SLEEP_CFG_OSC_EN);
+	__raw_writel(tmp, S5P64X0_SLEEP_CFG);
+
+	tmp = __raw_readl(S5P64X0_PWR_CFG);
+	tmp &= ~(S5P64X0_PWR_CFG_WFI_MASK);
+	tmp |= S5P64X0_PWR_CFG_WFI_SLEEP;
+	__raw_writel(tmp, S5P64X0_PWR_CFG);
+
+	/*
+	 * set OTHERS register to disable interrupt before going to
+	 * sleep. This bit is present only in S5P6450, it is reserved
+	 * in S5P6440.
+	 */
+	if (soc_is_s5p6450()) {
+		tmp = __raw_readl(S5P64X0_OTHERS);
+		tmp |= S5P6450_OTHERS_DISABLE_INT;
+		__raw_writel(tmp, S5P64X0_OTHERS);
+	}
+
+	/* ensure previous wakeup state is cleared before sleeping */
+	__raw_writel(__raw_readl(S5P64X0_WAKEUP_STAT), S5P64X0_WAKEUP_STAT);
+
+}
+
+static int s5p64x0_pm_add(struct sys_device *sysdev)
+{
+	pm_cpu_prep = s5p64x0_pm_prepare;
+	pm_cpu_sleep = s5p64x0_cpu_suspend;
+	pm_uart_udivslot = 1;
+
+	return 0;
+}
+
+static struct sysdev_driver s5p64x0_pm_driver = {
+	.add		= s5p64x0_pm_add,
+};
+
+static __init int s5p64x0_pm_drvinit(void)
+{
+	s3c_pm_init();
+
+	return sysdev_driver_register(&s5p64x0_sysclass, &s5p64x0_pm_driver);
+}
+arch_initcall(s5p64x0_pm_drvinit);
+
+static void s5p64x0_pm_resume(void)
+{
+	u32 tmp;
+
+	tmp = __raw_readl(S5P64X0_OTHERS);
+	tmp |= (S5P64X0_OTHERS_RET_MMC0 | S5P64X0_OTHERS_RET_MMC1 | \
+			S5P64X0_OTHERS_RET_UART);
+	__raw_writel(tmp , S5P64X0_OTHERS);
+}
+
+static struct syscore_ops s5p64x0_pm_syscore_ops = {
+	.resume		= s5p64x0_pm_resume,
+};
+
+static __init int s5p64x0_pm_syscore_init(void)
+{
+	register_syscore_ops(&s5p64x0_pm_syscore_ops);
+
+	return 0;
+}
+arch_initcall(s5p64x0_pm_syscore_init);
-- 
cgit v1.2.3-18-g5258