From 91e8512e75f5e36b83490072cfba9d9793103035 Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Mon, 4 Jan 2010 15:34:16 +0100 Subject: OMAP: Enable DSS2 in OMAP3EVM defconfig Signed-off-by: Vaibhav Hiremath [tomi.valkeinen@nokia.com: removed the board file changes] Signed-off-by: Tomi Valkeinen --- arch/arm/configs/omap3_evm_defconfig | 51 +++++++++++++++++++++++++++++++++++- 1 file changed, 50 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig index a6dd6d1af80..b02e371b099 100644 --- a/arch/arm/configs/omap3_evm_defconfig +++ b/arch/arm/configs/omap3_evm_defconfig @@ -911,7 +911,56 @@ CONFIG_DAB=y # # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m -# CONFIG_FB is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_OMAP2_VRAM=y +CONFIG_OMAP2_VRFB=y +CONFIG_OMAP2_DSS=y +CONFIG_OMAP2_VRAM_SIZE=4 +# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set +# CONFIG_OMAP2_DSS_RFBI is not set +CONFIG_OMAP2_DSS_VENC=y +# CONFIG_OMAP2_DSS_SDI is not set +# CONFIG_OMAP2_DSS_DSI is not set +# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set +CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4 +CONFIG_FB_OMAP2=y +# CONFIG_FB_OMAP2_DEBUG_SUPPORT is not set +# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set +CONFIG_FB_OMAP2_NUM_FBS=3 + +# +# OMAP2/3 Display Device Drivers +# +CONFIG_PANEL_GENERIC=y +# CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C is not set +CONFIG_PANEL_SHARP_LS037V7DW01=y # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -- cgit v1.2.3-18-g5258 From 14ec4740ff64e4111216287b1e8d51d515618b56 Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Wed, 13 Jan 2010 17:17:10 +0530 Subject: OMAP: AM3517: Enable DSS2 in AM3517EVM defconfig Signed-off-by: Vaibhav Hiremath [tomi.valkeinen@nokia.com: removed the board file changes] Signed-off-by: Tomi Valkeinen --- arch/arm/configs/am3517_evm_defconfig | 52 ++++++++++++++++++++++++++++++++++- 1 file changed, 51 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/configs/am3517_evm_defconfig b/arch/arm/configs/am3517_evm_defconfig index 66a10b50d93..214ef42466f 100644 --- a/arch/arm/configs/am3517_evm_defconfig +++ b/arch/arm/configs/am3517_evm_defconfig @@ -692,7 +692,57 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_ARMCLCD is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_OMAP2_VRAM=y +CONFIG_OMAP2_VRFB=y +CONFIG_OMAP2_DSS=y +CONFIG_OMAP2_VRAM_SIZE=4 +CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y +# CONFIG_OMAP2_DSS_RFBI is not set +CONFIG_OMAP2_DSS_VENC=y +# CONFIG_OMAP2_DSS_SDI is not set +# CONFIG_OMAP2_DSS_DSI is not set +# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set +CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4 +CONFIG_FB_OMAP2=y +CONFIG_FB_OMAP2_DEBUG_SUPPORT=y +# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set +CONFIG_FB_OMAP2_NUM_FBS=3 + +# +# OMAP2/3 Display Device Drivers +# +CONFIG_PANEL_GENERIC=y +# CONFIG_PANEL_SHARP_LS037V7DW01 is not set +CONFIG_PANEL_SHARP_LQ043T1DG01=y # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -- cgit v1.2.3-18-g5258 From 03e111045e362e16e97fdd79a49590a763fe5216 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Mon, 10 May 2010 10:35:17 +0200 Subject: OMAP: RX51: Add LCD Panel support Adds basic support for LCD Panel on Nokia N900 Signed-off-by: Roger Quadros Signed-off-by: Tomi Valkeinen --- arch/arm/mach-omap2/Makefile | 1 + arch/arm/mach-omap2/board-rx51-peripherals.c | 13 ++++ arch/arm/mach-omap2/board-rx51-video.c | 109 +++++++++++++++++++++++++++ arch/arm/mach-omap2/board-rx51.c | 2 + 4 files changed, 125 insertions(+) create mode 100644 arch/arm/mach-omap2/board-rx51-video.c (limited to 'arch') diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 4b9fc57770d..b03cbb434a3 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -122,6 +122,7 @@ obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \ board-rx51-sdram.o \ board-rx51-peripherals.o \ + board-rx51-video.o \ hsmmc.o obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom2.o \ board-zoom-peripherals.o \ diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 4377a4cf36e..f4045377485 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -45,6 +45,7 @@ /* list all spi devices here */ enum { RX51_SPI_WL1251, + RX51_SPI_MIPID, /* LCD panel */ }; static struct wl12xx_platform_data wl1251_pdata; @@ -54,6 +55,11 @@ static struct omap2_mcspi_device_config wl1251_mcspi_config = { .single_channel = 1, }; +static struct omap2_mcspi_device_config mipid_mcspi_config = { + .turbo_mode = 0, + .single_channel = 1, +}; + static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { [RX51_SPI_WL1251] = { .modalias = "wl1251", @@ -64,6 +70,13 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { .controller_data = &wl1251_mcspi_config, .platform_data = &wl1251_pdata, }, + [RX51_SPI_MIPID] = { + .modalias = "acx565akm", + .bus_num = 1, + .chip_select = 2, + .max_speed_hz = 6000000, + .controller_data = &mipid_mcspi_config, + }, }; #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c new file mode 100644 index 00000000000..b743a4f4264 --- /dev/null +++ b/arch/arm/mach-omap2/board-rx51-video.c @@ -0,0 +1,109 @@ +/* + * linux/arch/arm/mach-omap2/board-rx51-video.c + * + * Copyright (C) 2010 Nokia + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "mux.h" + +#define RX51_LCD_RESET_GPIO 90 + +#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) + +static int rx51_lcd_enable(struct omap_dss_device *dssdev) +{ + gpio_set_value(dssdev->reset_gpio, 1); + return 0; +} + +static void rx51_lcd_disable(struct omap_dss_device *dssdev) +{ + gpio_set_value(dssdev->reset_gpio, 0); +} + +static struct omap_dss_device rx51_lcd_device = { + .name = "lcd", + .driver_name = "panel-acx565akm", + .type = OMAP_DISPLAY_TYPE_SDI, + .phy.sdi.datapairs = 2, + .reset_gpio = RX51_LCD_RESET_GPIO, + .platform_enable = rx51_lcd_enable, + .platform_disable = rx51_lcd_disable, +}; + +static struct omap_dss_device *rx51_dss_devices[] = { + &rx51_lcd_device, +}; + +static struct omap_dss_board_info rx51_dss_board_info = { + .num_devices = ARRAY_SIZE(rx51_dss_devices), + .devices = rx51_dss_devices, + .default_device = &rx51_lcd_device, +}; + +struct platform_device rx51_display_device = { + .name = "omapdss", + .id = -1, + .dev = { + .platform_data = &rx51_dss_board_info, + }, +}; + +static struct platform_device *rx51_video_devices[] __initdata = { + &rx51_display_device, +}; + +static int __init rx51_video_init(void) +{ + if (!machine_is_nokia_rx51()) + return 0; + + if (omap_mux_init_gpio(RX51_LCD_RESET_GPIO, OMAP_PIN_OUTPUT)) { + pr_err("%s cannot configure MUX for LCD RESET\n", __func__); + return 0; + } + + if (gpio_request(RX51_LCD_RESET_GPIO, "LCD ACX565AKM reset")) { + pr_err("%s failed to get LCD Reset GPIO\n", __func__); + return 0; + } + + gpio_direction_output(RX51_LCD_RESET_GPIO, 1); + + platform_add_devices(rx51_video_devices, + ARRAY_SIZE(rx51_video_devices)); + return 0; +} + +subsys_initcall(rx51_video_init); + +void __init rx51_video_mem_init(void) +{ + /* + * GFX 864x480x32bpp + * VID1/2 1280x720x32bpp double buffered + */ + omap_vram_set_sdram_vram(PAGE_ALIGN(864 * 480 * 4) + + 2 * PAGE_ALIGN(1280 * 720 * 4 * 2), 0); +} + +#else +void __init rx51_video_mem_init(void) { } +#endif /* defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) */ diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index b155c366c65..1b86b5bb87a 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -36,6 +36,7 @@ #define RX51_GPIO_SLEEP_IND 162 struct omap_sdrc_params *rx51_get_sdram_timings(void); +extern void rx51_video_mem_init(void); static struct gpio_led gpio_leds[] = { { @@ -143,6 +144,7 @@ static void __init rx51_init(void) static void __init rx51_map_io(void) { omap2_set_globals_343x(); + rx51_video_mem_init(); omap34xx_map_common_io(); } -- cgit v1.2.3-18-g5258 From 6996e7ff215c1cbad3dc7db3216fc6cf4815988c Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Mon, 22 Mar 2010 17:16:25 +0200 Subject: OMAP: RX51: Add Touch Controller in SPI board info The Touch controller and LCD Panel share the same SPI bus 1. So, we need to define the touch controller in the SPI board info else, the SPI bus will be contended due to invalid state of Touch controller's Chip Select thus preventing the LCD panel from working. Signed-off-by: Roger Quadros Signed-off-by: Tomi Valkeinen --- arch/arm/mach-omap2/board-rx51-peripherals.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index f4045377485..d27a4ef6eb6 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -46,6 +46,7 @@ enum { RX51_SPI_WL1251, RX51_SPI_MIPID, /* LCD panel */ + RX51_SPI_TSC2005, /* Touch Controller */ }; static struct wl12xx_platform_data wl1251_pdata; @@ -60,6 +61,11 @@ static struct omap2_mcspi_device_config mipid_mcspi_config = { .single_channel = 1, }; +static struct omap2_mcspi_device_config tsc2005_mcspi_config = { + .turbo_mode = 0, + .single_channel = 1, +}; + static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { [RX51_SPI_WL1251] = { .modalias = "wl1251", @@ -77,6 +83,15 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { .max_speed_hz = 6000000, .controller_data = &mipid_mcspi_config, }, + [RX51_SPI_TSC2005] = { + .modalias = "tsc2005", + .bus_num = 1, + .chip_select = 0, + /* .irq = OMAP_GPIO_IRQ(RX51_TSC2005_IRQ_GPIO),*/ + .max_speed_hz = 6000000, + .controller_data = &tsc2005_mcspi_config, + /* .platform_data = &tsc2005_config,*/ + }, }; #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -- cgit v1.2.3-18-g5258 From 2c59ff5501e5a37d36f232e757c961ced12eb99f Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Tue, 23 Mar 2010 11:22:05 +0200 Subject: OMAP: RX51: Update board defconfig Add LCD, Boot-up logo, framebuffer console, Keypad and Power button support Signed-off-by: Roger Quadros Signed-off-by: Tomi Valkeinen --- arch/arm/configs/rx51_defconfig | 39 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 38 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig index 473f9e13f08..56d4928cd4c 100644 --- a/arch/arm/configs/rx51_defconfig +++ b/arch/arm/configs/rx51_defconfig @@ -784,6 +784,7 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_KEYBOARD_GPIO=m +CONFIG_KEYBOARD_TWL4030=y # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -809,6 +810,7 @@ CONFIG_INPUT_MISC=y # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_CM109 is not set +CONFIG_INPUT_TWL4030_PWRBUTTON=y CONFIG_INPUT_UINPUT=m # @@ -1110,7 +1112,40 @@ CONFIG_RADIO_ADAPTERS=y # # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y + +# Frame buffer hardware drivers +# +CONFIG_OMAP2_VRAM=y +CONFIG_OMAP2_VRFB=y +CONFIG_OMAP2_DSS=y +CONFIG_OMAP2_VRAM_SIZE=0 +# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set +# CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not set +# CONFIG_OMAP2_DSS_DPI is not set +# CONFIG_OMAP2_DSS_RFBI is not set +# CONFIG_OMAP2_DSS_VENC is not set +CONFIG_OMAP2_DSS_SDI=y +# CONFIG_OMAP2_DSS_DSI is not set +# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set +CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0 +CONFIG_FB_OMAP2=y +CONFIG_FB_OMAP2_DEBUG_SUPPORT=y +CONFIG_FB_OMAP2_NUM_FBS=3 + +# +# OMAP2/3 Display Device Drivers +# +# CONFIG_PANEL_GENERIC is not set +# CONFIG_PANEL_SHARP_LS037V7DW01 is not set +# CONFIG_PANEL_SHARP_LQ043T1DG01 is not set +# CONFIG_PANEL_TOPPOLY_TDO35S is not set +# CONFIG_PANEL_TPO_TD043MTEA1 is not set +CONFIG_PANEL_ACX565AKM=y + # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -1127,6 +1162,8 @@ CONFIG_DISPLAY_SUPPORT=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_LOGO=y CONFIG_SOUND=y # CONFIG_SOUND_OSS_CORE is not set CONFIG_SND=y -- cgit v1.2.3-18-g5258 From 044d32ffbcb4a1d400088e3575508f46c0a9face Mon Sep 17 00:00:00 2001 From: Koen Kooi Date: Thu, 22 Apr 2010 10:23:42 +0200 Subject: board-omap3-beagle: add DSS2 support This patch adds DSS2 support to the beagleboard boardfile. DVI and TV-out are supported. Signed-off-by: Koen Kooi Signed-off-by: Tomi Valkeinen --- arch/arm/mach-omap2/board-omap3beagle.c | 101 ++++++++++++++++++++++++-------- 1 file changed, 75 insertions(+), 26 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 962d377970e..69b154cdc75 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -39,6 +39,7 @@ #include #include +#include #include #include #include @@ -106,6 +107,77 @@ static struct platform_device omap3beagle_nand_device = { .resource = &omap3beagle_nand_resource, }; +/* DSS */ + +static int beagle_enable_dvi(struct omap_dss_device *dssdev) +{ + if (gpio_is_valid(dssdev->reset_gpio)) + gpio_set_value(dssdev->reset_gpio, 1); + + return 0; +} + +static void beagle_disable_dvi(struct omap_dss_device *dssdev) +{ + if (gpio_is_valid(dssdev->reset_gpio)) + gpio_set_value(dssdev->reset_gpio, 0); +} + +static struct omap_dss_device beagle_dvi_device = { + .type = OMAP_DISPLAY_TYPE_DPI, + .name = "dvi", + .driver_name = "generic_panel", + .phy.dpi.data_lines = 24, + .reset_gpio = 170, + .platform_enable = beagle_enable_dvi, + .platform_disable = beagle_disable_dvi, +}; + +static struct omap_dss_device beagle_tv_device = { + .name = "tv", + .driver_name = "venc", + .type = OMAP_DISPLAY_TYPE_VENC, + .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, +}; + +static struct omap_dss_device *beagle_dss_devices[] = { + &beagle_dvi_device, + &beagle_tv_device, +}; + +static struct omap_dss_board_info beagle_dss_data = { + .num_devices = ARRAY_SIZE(beagle_dss_devices), + .devices = beagle_dss_devices, + .default_device = &beagle_dvi_device, +}; + +static struct platform_device beagle_dss_device = { + .name = "omapdss", + .id = -1, + .dev = { + .platform_data = &beagle_dss_data, + }, +}; + +static struct regulator_consumer_supply beagle_vdac_supply = + REGULATOR_SUPPLY("vdda_dac", "omapdss"); + +static struct regulator_consumer_supply beagle_vdvi_supply = + REGULATOR_SUPPLY("vdds_dsi", "omapdss"); + +static void __init beagle_display_init(void) +{ + int r; + + r = gpio_request(beagle_dvi_device.reset_gpio, "DVI reset"); + if (r < 0) { + printk(KERN_ERR "Unable to get DVI reset GPIO\n"); + return; + } + + gpio_direction_output(beagle_dvi_device.reset_gpio, 0); +} + #include "sdram-micron-mt46h32m32lf-6.h" static struct omap2_hsmmc_info mmc[] = { @@ -117,15 +189,6 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; -static struct platform_device omap3_beagle_lcd_device = { - .name = "omap3beagle_lcd", - .id = -1, -}; - -static struct omap_lcd_config omap3_beagle_lcd_config __initdata = { - .ctrl_name = "internal", -}; - static struct regulator_consumer_supply beagle_vmmc1_supply = { .supply = "vmmc", }; @@ -181,16 +244,6 @@ static struct twl4030_gpio_platform_data beagle_gpio_data = { .setup = beagle_twl_gpio_setup, }; -static struct regulator_consumer_supply beagle_vdac_supply = { - .supply = "vdac", - .dev = &omap3_beagle_lcd_device.dev, -}; - -static struct regulator_consumer_supply beagle_vdvi_supply = { - .supply = "vdvi", - .dev = &omap3_beagle_lcd_device.dev, -}; - /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ static struct regulator_init_data beagle_vmmc1 = { .constraints = { @@ -349,14 +402,8 @@ static struct platform_device keys_gpio = { }, }; -static struct omap_board_config_kernel omap3_beagle_config[] __initdata = { - { OMAP_TAG_LCD, &omap3_beagle_lcd_config }, -}; - static void __init omap3_beagle_init_irq(void) { - omap_board_config = omap3_beagle_config; - omap_board_config_size = ARRAY_SIZE(omap3_beagle_config); omap2_init_common_hw(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); omap_init_irq(); @@ -367,9 +414,9 @@ static void __init omap3_beagle_init_irq(void) } static struct platform_device *omap3_beagle_devices[] __initdata = { - &omap3_beagle_lcd_device, &leds_gpio, &keys_gpio, + &beagle_dss_device, }; static void __init omap3beagle_flash_init(void) @@ -456,6 +503,8 @@ static void __init omap3_beagle_init(void) /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); + + beagle_display_init(); } static void __init omap3_beagle_map_io(void) -- cgit v1.2.3-18-g5258