From d89ddd1c847637d91625c8cb6b0d064e1717057c Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 25 Jul 2007 11:42:56 +0900 Subject: sh: remove support for sh7300 and solution engine 7300 This patch removes old dead code: - kill off sh7300 cpu support - get rid of broken solution engine 7300 board support Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 10 +- arch/sh/Makefile | 1 - arch/sh/boards/se/7300/Makefile | 5 - arch/sh/boards/se/7300/io.c | 268 ------------- arch/sh/boards/se/7300/irq.c | 40 -- arch/sh/boards/se/7300/setup.c | 74 ---- arch/sh/configs/se7300_defconfig | 696 ---------------------------------- arch/sh/kernel/cpu/irq/ipr.c | 2 +- arch/sh/kernel/cpu/sh3/Makefile | 4 +- arch/sh/kernel/cpu/sh3/clock-sh7300.c | 78 ---- arch/sh/kernel/cpu/sh3/clock-sh7710.c | 78 ++++ arch/sh/kernel/cpu/sh3/setup-sh7300.c | 43 --- arch/sh/kernel/setup.c | 1 - arch/sh/kernel/timers/timer-tmu.c | 3 +- arch/sh/mm/Kconfig | 4 - arch/sh/tools/mach-types | 1 - 16 files changed, 82 insertions(+), 1226 deletions(-) delete mode 100644 arch/sh/boards/se/7300/Makefile delete mode 100644 arch/sh/boards/se/7300/io.c delete mode 100644 arch/sh/boards/se/7300/irq.c delete mode 100644 arch/sh/boards/se/7300/setup.c delete mode 100644 arch/sh/configs/se7300_defconfig delete mode 100644 arch/sh/kernel/cpu/sh3/clock-sh7300.c create mode 100644 arch/sh/kernel/cpu/sh3/clock-sh7710.c delete mode 100644 arch/sh/kernel/cpu/sh3/setup-sh7300.c (limited to 'arch/sh') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index ec2beabb193..54878f07cf0 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -264,14 +264,6 @@ config SH_7780_SOLUTION_ENGINE Select 7780 SolutionEngine if configuring for a Renesas SH7780 evaluation board. -config SH_7300_SOLUTION_ENGINE - bool "SolutionEngine7300" - select SOLUTION_ENGINE - depends on CPU_SUBTYPE_SH7300 - help - Select 7300 SolutionEngine if configuring for a Hitachi - SH7300(SH-Mobile V) evaluation board. - config SH_7343_SOLUTION_ENGINE bool "SolutionEngine7343" select SOLUTION_ENGINE @@ -446,7 +438,7 @@ config SH_PCLK_FREQ default "27000000" if CPU_SUBTYPE_SH7343 default "31250000" if CPU_SUBTYPE_SH7619 default "32000000" if CPU_SUBTYPE_SH7722 - default "33333333" if CPU_SUBTYPE_SH7300 || CPU_SUBTYPE_SH7770 || \ + default "33333333" if CPU_SUBTYPE_SH7770 || \ CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \ CPU_SUBTYPE_SH7206 default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R diff --git a/arch/sh/Makefile b/arch/sh/Makefile index cb6661c5efe..3d211aa33cd 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -91,7 +91,6 @@ machdir-$(CONFIG_SH_SOLUTION_ENGINE) += se/770x machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE) += se/7722 machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) += se/7751 machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE) += se/7780 -machdir-$(CONFIG_SH_7300_SOLUTION_ENGINE) += se/7300 machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) += se/7343 machdir-$(CONFIG_SH_HP6XX) += hp6xx machdir-$(CONFIG_SH_DREAMCAST) += dreamcast diff --git a/arch/sh/boards/se/7300/Makefile b/arch/sh/boards/se/7300/Makefile deleted file mode 100644 index 46247368f14..00000000000 --- a/arch/sh/boards/se/7300/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the 7300 SolutionEngine specific parts of the kernel -# - -obj-y := setup.o io.o irq.o diff --git a/arch/sh/boards/se/7300/io.c b/arch/sh/boards/se/7300/io.c deleted file mode 100644 index 8a03d7a52a7..00000000000 --- a/arch/sh/boards/se/7300/io.c +++ /dev/null @@ -1,268 +0,0 @@ -/* - * arch/sh/boards/se/7300/io.c - * - * Copyright (C) 2003 YOSHII Takashi - * Based on arch/sh/kernel/io_shmse.c - * - * I/O routine for SH-Mobile3 73180 SolutionEngine. - * - */ - -#include -#include -#include - -#define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a) - -struct iop { - unsigned long start, end; - unsigned long base; - struct iop *(*check) (struct iop * p, unsigned long port); - unsigned char (*inb) (struct iop * p, unsigned long port); - unsigned short (*inw) (struct iop * p, unsigned long port); - void (*outb) (struct iop * p, unsigned char value, unsigned long port); - void (*outw) (struct iop * p, unsigned short value, unsigned long port); -}; - -struct iop * -simple_check(struct iop *p, unsigned long port) -{ - if ((p->start <= port) && (port <= p->end)) - return p; - else - badio(check, port); -} - -struct iop * -ide_check(struct iop *p, unsigned long port) -{ - if (((0x1f0 <= port) && (port <= 0x1f7)) || (port == 0x3f7)) - return p; - return NULL; -} - -unsigned char -simple_inb(struct iop *p, unsigned long port) -{ - return *(unsigned char *) (p->base + port); -} - -unsigned short -simple_inw(struct iop *p, unsigned long port) -{ - return *(unsigned short *) (p->base + port); -} - -void -simple_outb(struct iop *p, unsigned char value, unsigned long port) -{ - *(unsigned char *) (p->base + port) = value; -} - -void -simple_outw(struct iop *p, unsigned short value, unsigned long port) -{ - *(unsigned short *) (p->base + port) = value; -} - -unsigned char -pcc_inb(struct iop *p, unsigned long port) -{ - unsigned long addr = p->base + port + 0x40000; - unsigned long v; - - if (port & 1) - addr += 0x00400000; - v = *(volatile unsigned char *) addr; - return v; -} - -void -pcc_outb(struct iop *p, unsigned char value, unsigned long port) -{ - unsigned long addr = p->base + port + 0x40000; - - if (port & 1) - addr += 0x00400000; - *(volatile unsigned char *) addr = value; -} - -unsigned char -bad_inb(struct iop *p, unsigned long port) -{ - badio(inb, port); -} - -void -bad_outb(struct iop *p, unsigned char value, unsigned long port) -{ - badio(inw, port); -} - -#ifdef CONFIG_SMC91X -/* MSTLANEX01 LAN at 0xb400:0000 */ -static struct iop laniop = { - .start = 0x300, - .end = 0x30f, - .base = 0xb4000000, - .check = simple_check, - .inb = simple_inb, - .inw = simple_inw, - .outb = simple_outb, - .outw = simple_outw, -}; -#endif - -/* NE2000 pc card NIC */ -static struct iop neiop = { - .start = 0x280, - .end = 0x29f, - .base = 0xb0600000 + 0x80, /* soft 0x280 -> hard 0x300 */ - .check = simple_check, - .inb = pcc_inb, - .inw = simple_inw, - .outb = pcc_outb, - .outw = simple_outw, -}; - -#ifdef CONFIG_IDE -/* CF in CF slot */ -static struct iop cfiop = { - .base = 0xb0600000, - .check = ide_check, - .inb = pcc_inb, - .inw = simple_inw, - .outb = pcc_outb, - .outw = simple_outw, -}; -#endif - -static __inline__ struct iop * -port2iop(unsigned long port) -{ - if (0) ; -#if defined(CONFIG_SMC91X) - else if (laniop.check(&laniop, port)) - return &laniop; -#endif -#if defined(CONFIG_NE2000) - else if (neiop.check(&neiop, port)) - return &neiop; -#endif -#if defined(CONFIG_IDE) - else if (cfiop.check(&cfiop, port)) - return &cfiop; -#endif - else - return &neiop; /* fallback */ -} - -static inline void -delay(void) -{ - ctrl_inw(0xac000000); - ctrl_inw(0xac000000); -} - -unsigned char -sh7300se_inb(unsigned long port) -{ - struct iop *p = port2iop(port); - return (p->inb) (p, port); -} - -unsigned char -sh7300se_inb_p(unsigned long port) -{ - unsigned char v = sh7300se_inb(port); - delay(); - return v; -} - -unsigned short -sh7300se_inw(unsigned long port) -{ - struct iop *p = port2iop(port); - return (p->inw) (p, port); -} - -unsigned int -sh7300se_inl(unsigned long port) -{ - badio(inl, port); -} - -void -sh7300se_outb(unsigned char value, unsigned long port) -{ - struct iop *p = port2iop(port); - (p->outb) (p, value, port); -} - -void -sh7300se_outb_p(unsigned char value, unsigned long port) -{ - sh7300se_outb(value, port); - delay(); -} - -void -sh7300se_outw(unsigned short value, unsigned long port) -{ - struct iop *p = port2iop(port); - (p->outw) (p, value, port); -} - -void -sh7300se_outl(unsigned int value, unsigned long port) -{ - badio(outl, port); -} - -void -sh7300se_insb(unsigned long port, void *addr, unsigned long count) -{ - unsigned char *a = addr; - struct iop *p = port2iop(port); - while (count--) - *a++ = (p->inb) (p, port); -} - -void -sh7300se_insw(unsigned long port, void *addr, unsigned long count) -{ - unsigned short *a = addr; - struct iop *p = port2iop(port); - while (count--) - *a++ = (p->inw) (p, port); -} - -void -sh7300se_insl(unsigned long port, void *addr, unsigned long count) -{ - badio(insl, port); -} - -void -sh7300se_outsb(unsigned long port, const void *addr, unsigned long count) -{ - unsigned char *a = (unsigned char *) addr; - struct iop *p = port2iop(port); - while (count--) - (p->outb) (p, *a++, port); -} - -void -sh7300se_outsw(unsigned long port, const void *addr, unsigned long count) -{ - unsigned short *a = (unsigned short *) addr; - struct iop *p = port2iop(port); - while (count--) - (p->outw) (p, *a++, port); -} - -void -sh7300se_outsl(unsigned long port, const void *addr, unsigned long count) -{ - badio(outsw, port); -} diff --git a/arch/sh/boards/se/7300/irq.c b/arch/sh/boards/se/7300/irq.c deleted file mode 100644 index 1279d776d60..00000000000 --- a/arch/sh/boards/se/7300/irq.c +++ /dev/null @@ -1,40 +0,0 @@ -/* - * linux/arch/sh/boards/se/7300/irq.c - * - * Copyright (C) 2003 Takashi Kusuda - * - * SH-Mobile SolutionEngine 7300 Support. - * - */ - -#include -#include -#include -#include -#include - -static struct ipr_data se7300_ipr_map[] = { - /* PC_IRQ[0-3] -> IRQ0 (32) */ - { IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, 0x0f - IRQ0_IRQ }, - /* A_IRQ[0-3] -> IRQ1 (33) */ - { IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, 0x0f - IRQ1_IRQ }, - { SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY }, - { DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, - { DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, - { VIO_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY }, -}; - -/* - * Initialize IRQ setting - */ -void __init -init_7300se_IRQ(void) -{ - ctrl_outw(0x0028, PA_EPLD_MODESET); /* mode set IRQ0,1 active low. */ - ctrl_outw(0xa000, INTC_ICR1); /* IRQ mode; IRQ0,1 enable. */ - ctrl_outw(0x0000, PORT_PFCR); /* use F for IRQ[3:0] and SIU. */ - - make_ipr_irq(se7300_ipr_map, ARRAY_SIZE(se7300_ipr_map)); - - ctrl_outw(0x2000, PA_MRSHPC + 0x0c); /* mrshpc irq enable */ -} diff --git a/arch/sh/boards/se/7300/setup.c b/arch/sh/boards/se/7300/setup.c deleted file mode 100644 index eb469f5b6e9..00000000000 --- a/arch/sh/boards/se/7300/setup.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - * linux/arch/sh/boards/se/7300/setup.c - * - * Copyright (C) 2003 Takashi Kusuda - * - * SH-Mobile SolutionEngine 7300 Support. - * - */ -#include -#include -#include -#include - -void init_7300se_IRQ(void); - -static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 }; - -static struct resource heartbeat_resources[] = { - [0] = { - .start = PA_LED, - .end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device heartbeat_device = { - .name = "heartbeat", - .id = -1, - .dev = { - .platform_data = heartbeat_bit_pos, - }, - .num_resources = ARRAY_SIZE(heartbeat_resources), - .resource = heartbeat_resources, -}; - -static struct platform_device *se7300_devices[] __initdata = { - &heartbeat_device, -}; - -static int __init se7300_devices_setup(void) -{ - return platform_add_devices(se7300_devices, ARRAY_SIZE(se7300_devices)); -} -__initcall(se7300_devices_setup); - -/* - * The Machine Vector - */ -static struct sh_machine_vector mv_7300se __initmv = { - .mv_name = "SolutionEngine 7300", - .mv_nr_irqs = 109, - .mv_inb = sh7300se_inb, - .mv_inw = sh7300se_inw, - .mv_inl = sh7300se_inl, - .mv_outb = sh7300se_outb, - .mv_outw = sh7300se_outw, - .mv_outl = sh7300se_outl, - - .mv_inb_p = sh7300se_inb_p, - .mv_inw_p = sh7300se_inw, - .mv_inl_p = sh7300se_inl, - .mv_outb_p = sh7300se_outb_p, - .mv_outw_p = sh7300se_outw, - .mv_outl_p = sh7300se_outl, - - .mv_insb = sh7300se_insb, - .mv_insw = sh7300se_insw, - .mv_insl = sh7300se_insl, - .mv_outsb = sh7300se_outsb, - .mv_outsw = sh7300se_outsw, - .mv_outsl = sh7300se_outsl, - - .mv_init_irq = init_7300se_IRQ, -}; diff --git a/arch/sh/configs/se7300_defconfig b/arch/sh/configs/se7300_defconfig deleted file mode 100644 index 8a217908b81..00000000000 --- a/arch/sh/configs/se7300_defconfig +++ /dev/null @@ -1,696 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.18 -# Tue Oct 3 11:43:22 2006 -# -CONFIG_SUPERH=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -# CONFIG_SWAP is not set -# CONFIG_SYSVIPC is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_UTS_NS is not set -# CONFIG_IKCONFIG is not set -# CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -# CONFIG_SYSCTL_SYSCALL is not set -# CONFIG_KALLSYMS is not set -# CONFIG_HOTPLUG is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -# CONFIG_FUTEX is not set -# CONFIG_EPOLL is not set -CONFIG_SHMEM=y -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -# CONFIG_MODULES is not set - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -CONFIG_DEFAULT_NOOP=y -CONFIG_DEFAULT_IOSCHED="noop" - -# -# System type -# -CONFIG_SOLUTION_ENGINE=y -# CONFIG_SH_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -CONFIG_SH_7300_SOLUTION_ENGINE=y -# CONFIG_SH_7343_SOLUTION_ENGINE is not set -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_EC3104 is not set -# CONFIG_SH_SATURN is not set -# CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_BIGSUR is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -# CONFIG_SH_HS7751RVOIP is not set -# CONFIG_SH_7710VOIPGW is not set -# CONFIG_SH_RTS7751R2D is not set -# CONFIG_SH_R7780RP is not set -# CONFIG_SH_EDOSK7705 is not set -# CONFIG_SH_SH4202_MICRODEV is not set -# CONFIG_SH_LANDISK is not set -# CONFIG_SH_TITAN is not set -# CONFIG_SH_SHMIN is not set -# CONFIG_SH_UNKNOWN is not set - -# -# Processor selection -# -CONFIG_CPU_SH3=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set - -# -# SH-3 Processor Support -# -CONFIG_CPU_SUBTYPE_SH7300=y -# CONFIG_CPU_SUBTYPE_SH7705 is not set -# CONFIG_CPU_SUBTYPE_SH7706 is not set -# CONFIG_CPU_SUBTYPE_SH7707 is not set -# CONFIG_CPU_SUBTYPE_SH7708 is not set -# CONFIG_CPU_SUBTYPE_SH7709 is not set -# CONFIG_CPU_SUBTYPE_SH7710 is not set - -# -# SH-4 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7750 is not set -# CONFIG_CPU_SUBTYPE_SH7091 is not set -# CONFIG_CPU_SUBTYPE_SH7750R is not set -# CONFIG_CPU_SUBTYPE_SH7750S is not set -# CONFIG_CPU_SUBTYPE_SH7751 is not set -# CONFIG_CPU_SUBTYPE_SH7751R is not set -# CONFIG_CPU_SUBTYPE_SH7760 is not set -# CONFIG_CPU_SUBTYPE_SH4_202 is not set - -# -# ST40 Processor Support -# -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7770 is not set -# CONFIG_CPU_SUBTYPE_SH7780 is not set - -# -# SH4AL-DSP Processor Support -# -# CONFIG_CPU_SUBTYPE_SH73180 is not set -# CONFIG_CPU_SUBTYPE_SH7343 is not set - -# -# Memory management options -# -CONFIG_MMU=y -CONFIG_PAGE_OFFSET=0x80000000 -CONFIG_MEMORY_START=0x0c000000 -CONFIG_MEMORY_SIZE=0x04000000 -CONFIG_VSYSCALL=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set - -# -# Cache configuration -# -# CONFIG_SH_DIRECT_MAPPED is not set -# CONFIG_SH_WRITETHROUGH is not set -# CONFIG_SH_OCRAM is not set - -# -# Processor features -# -CONFIG_CPU_LITTLE_ENDIAN=y -# CONFIG_SH_FPU_EMU is not set -CONFIG_SH_DSP=y -# CONFIG_SH_ADC is not set -CONFIG_CPU_HAS_INTEVT=y -CONFIG_CPU_HAS_SR_RB=y - -# -# Timer support -# -CONFIG_SH_TMU=y -CONFIG_SH_PCLK_FREQ=33333333 - -# -# CPU Frequency scaling -# -# CONFIG_CPU_FREQ is not set - -# -# DMA support -# -# CONFIG_SH_DMA is not set - -# -# Companion Chips -# -# CONFIG_HD6446X_SERIES is not set -CONFIG_HEARTBEAT=y - -# -# Kernel features -# -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -# CONFIG_KEXEC is not set -# CONFIG_SMP is not set -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set - -# -# Boot options -# -CONFIG_ZERO_PAGE_OFFSET=0x00001000 -CONFIG_BOOT_LINK_OFFSET=0x00210000 -# CONFIG_UBC_WAKEUP is not set -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=ttySC0,38400 root=/dev/ram0" - -# -# Bus options -# -# CONFIG_PCI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# - -# -# PCI Hotplug Support -# - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_FLAT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - -# -# Networking -# -# CONFIG_NET is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# ISDN subsystem -# - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_NR_UARTS=2 -CONFIG_SERIAL_SH_SCI_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_UNIX98_PTYS is not set -# CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# -CONFIG_IPMI_HANDLER=y -# CONFIG_IPMI_PANIC_EVENT is not set -CONFIG_IPMI_DEVICE_INTERFACE=y -# CONFIG_IPMI_SI is not set -CONFIG_IPMI_WATCHDOG=y -# CONFIG_IPMI_POWEROFF is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -CONFIG_SOFT_WATCHDOG=y -# CONFIG_SH_WDT is not set -CONFIG_HW_RANDOM=y -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y - -# -# Digital Video Broadcasting Devices -# - -# -# Graphics support -# -CONFIG_FIRMWARE_EDID=y -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# -# CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -# CONFIG_TMPFS is not set -# CONFIG_HUGETLBFS is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set -CONFIG_FRAME_POINTER=y -# CONFIG_UNWIND_INFO is not set -CONFIG_SH_STANDARD_BIOS=y -CONFIG_EARLY_PRINTK=y -CONFIG_KGDB=y - -# -# KGDB configuration options -# -# CONFIG_MORE_COMPILE_OPTIONS is not set -# CONFIG_KGDB_NMI is not set -# CONFIG_KGDB_THREAD is not set -# CONFIG_SH_KGDB_CONSOLE is not set -# CONFIG_KGDB_SYSRQ is not set -# CONFIG_KGDB_KERNEL_ASSERTS is not set - -# -# Serial port setup -# -CONFIG_KGDB_DEFPORT=1 -CONFIG_KGDB_DEFBAUD=115200 -CONFIG_KGDB_DEFPARITY_N=y -# CONFIG_KGDB_DEFPARITY_E is not set -# CONFIG_KGDB_DEFPARITY_O is not set -CONFIG_KGDB_DEFBITS_8=y -# CONFIG_KGDB_DEFBITS_7 is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set diff --git a/arch/sh/kernel/cpu/irq/ipr.c b/arch/sh/kernel/cpu/irq/ipr.c index 98e84f40c71..5da32541488 100644 --- a/arch/sh/kernel/cpu/irq/ipr.c +++ b/arch/sh/kernel/cpu/irq/ipr.c @@ -8,7 +8,7 @@ * * Supported system: * On-chip supporting modules (TMU, RTC, etc.). - * On-chip supporting modules for SH7709/SH7709A/SH7729/SH7300. + * On-chip supporting modules for SH7709/SH7709A/SH7729. * Hitachi SolutionEngine external I/O: * MS7709SE01, MS7709ASE01, and MS7750SE01 * diff --git a/arch/sh/kernel/cpu/sh3/Makefile b/arch/sh/kernel/cpu/sh3/Makefile index 09faa056cd4..55b750763f6 100644 --- a/arch/sh/kernel/cpu/sh3/Makefile +++ b/arch/sh/kernel/cpu/sh3/Makefile @@ -10,16 +10,14 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7706) += setup-sh7709.o obj-$(CONFIG_CPU_SUBTYPE_SH7707) += setup-sh7709.o obj-$(CONFIG_CPU_SUBTYPE_SH7708) += setup-sh7708.o obj-$(CONFIG_CPU_SUBTYPE_SH7709) += setup-sh7709.o -obj-$(CONFIG_CPU_SUBTYPE_SH7300) += setup-sh7300.o obj-$(CONFIG_CPU_SUBTYPE_SH7710) += setup-sh7710.o obj-$(CONFIG_CPU_SUBTYPE_SH7712) += setup-sh7710.o # Primary on-chip clocks (common) clock-$(CONFIG_CPU_SH3) := clock-sh3.o -clock-$(CONFIG_CPU_SUBTYPE_SH7300) := clock-sh7300.o clock-$(CONFIG_CPU_SUBTYPE_SH7705) := clock-sh7705.o clock-$(CONFIG_CPU_SUBTYPE_SH7706) := clock-sh7706.o clock-$(CONFIG_CPU_SUBTYPE_SH7709) := clock-sh7709.o -clock-$(CONFIG_CPU_SUBTYPE_SH7710) := clock-sh7300.o +clock-$(CONFIG_CPU_SUBTYPE_SH7710) := clock-sh7710.o obj-y += $(clock-y) diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7300.c b/arch/sh/kernel/cpu/sh3/clock-sh7300.c deleted file mode 100644 index e804174b962..00000000000 --- a/arch/sh/kernel/cpu/sh3/clock-sh7300.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * arch/sh/kernel/cpu/sh3/clock-sh7300.c - * - * SH7300 support for the clock framework - * - * Copyright (C) 2005 Paul Mundt - * - * FRQCR parsing hacked out of arch/sh/kernel/time.c - * - * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka - * Copyright (C) 2000 Philipp Rumpf - * Copyright (C) 2002, 2003, 2004 Paul Mundt - * Copyright (C) 2002 M. R. Brown - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include -#include -#include -#include - -static int md_table[] = { 1, 2, 3, 4, 6, 8, 12 }; - -static void master_clk_init(struct clk *clk) -{ - clk->rate *= md_table[ctrl_inw(FRQCR) & 0x0007]; -} - -static struct clk_ops sh7300_master_clk_ops = { - .init = master_clk_init, -}; - -static void module_clk_recalc(struct clk *clk) -{ - int idx = (ctrl_inw(FRQCR) & 0x0007); - clk->rate = clk->parent->rate / md_table[idx]; -} - -static struct clk_ops sh7300_module_clk_ops = { - .recalc = module_clk_recalc, -}; - -static void bus_clk_recalc(struct clk *clk) -{ - int idx = (ctrl_inw(FRQCR) & 0x0700) >> 8; - clk->rate = clk->parent->rate / md_table[idx]; -} - -static struct clk_ops sh7300_bus_clk_ops = { - .recalc = bus_clk_recalc, -}; - -static void cpu_clk_recalc(struct clk *clk) -{ - int idx = (ctrl_inw(FRQCR) & 0x0070) >> 4; - clk->rate = clk->parent->rate / md_table[idx]; -} - -static struct clk_ops sh7300_cpu_clk_ops = { - .recalc = cpu_clk_recalc, -}; - -static struct clk_ops *sh7300_clk_ops[] = { - &sh7300_master_clk_ops, - &sh7300_module_clk_ops, - &sh7300_bus_clk_ops, - &sh7300_cpu_clk_ops, -}; - -void __init arch_init_clk_ops(struct clk_ops **ops, int idx) -{ - if (idx < ARRAY_SIZE(sh7300_clk_ops)) - *ops = sh7300_clk_ops[idx]; -} - diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7710.c b/arch/sh/kernel/cpu/sh3/clock-sh7710.c new file mode 100644 index 00000000000..4744c50ec44 --- /dev/null +++ b/arch/sh/kernel/cpu/sh3/clock-sh7710.c @@ -0,0 +1,78 @@ +/* + * arch/sh/kernel/cpu/sh3/clock-sh7710.c + * + * SH7710 support for the clock framework + * + * Copyright (C) 2005 Paul Mundt + * + * FRQCR parsing hacked out of arch/sh/kernel/time.c + * + * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka + * Copyright (C) 2000 Philipp Rumpf + * Copyright (C) 2002, 2003, 2004 Paul Mundt + * Copyright (C) 2002 M. R. Brown + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include + +static int md_table[] = { 1, 2, 3, 4, 6, 8, 12 }; + +static void master_clk_init(struct clk *clk) +{ + clk->rate *= md_table[ctrl_inw(FRQCR) & 0x0007]; +} + +static struct clk_ops sh7710_master_clk_ops = { + .init = master_clk_init, +}; + +static void module_clk_recalc(struct clk *clk) +{ + int idx = (ctrl_inw(FRQCR) & 0x0007); + clk->rate = clk->parent->rate / md_table[idx]; +} + +static struct clk_ops sh7710_module_clk_ops = { + .recalc = module_clk_recalc, +}; + +static void bus_clk_recalc(struct clk *clk) +{ + int idx = (ctrl_inw(FRQCR) & 0x0700) >> 8; + clk->rate = clk->parent->rate / md_table[idx]; +} + +static struct clk_ops sh7710_bus_clk_ops = { + .recalc = bus_clk_recalc, +}; + +static void cpu_clk_recalc(struct clk *clk) +{ + int idx = (ctrl_inw(FRQCR) & 0x0070) >> 4; + clk->rate = clk->parent->rate / md_table[idx]; +} + +static struct clk_ops sh7710_cpu_clk_ops = { + .recalc = cpu_clk_recalc, +}; + +static struct clk_ops *sh7710_clk_ops[] = { + &sh7710_master_clk_ops, + &sh7710_module_clk_ops, + &sh7710_bus_clk_ops, + &sh7710_cpu_clk_ops, +}; + +void __init arch_init_clk_ops(struct clk_ops **ops, int idx) +{ + if (idx < ARRAY_SIZE(sh7710_clk_ops)) + *ops = sh7710_clk_ops[idx]; +} + diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7300.c b/arch/sh/kernel/cpu/sh3/setup-sh7300.c deleted file mode 100644 index ab4d204bfba..00000000000 --- a/arch/sh/kernel/cpu/sh3/setup-sh7300.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * SH7300 Setup - * - * Copyright (C) 2006 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include -#include -#include - -static struct plat_sci_port sci_platform_data[] = { - { - .mapbase = 0xa4430000, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCI, - .irqs = { 80, 80, 80, 80 }, - }, { - .flags = 0, - } -}; - -static struct platform_device sci_device = { - .name = "sh-sci", - .id = -1, - .dev = { - .platform_data = sci_platform_data, - }, -}; - -static struct platform_device *sh7300_devices[] __initdata = { - &sci_device, -}; - -static int __init sh7300_devices_setup(void) -{ - return platform_add_devices(sh7300_devices, - ARRAY_SIZE(sh7300_devices)); -} -__initcall(sh7300_devices_setup); diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index af766b6cd3c..2cf7dec0d69 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -276,7 +276,6 @@ void __init setup_arch(char **cmdline_p) static const char *cpu_name[] = { [CPU_SH7206] = "SH7206", [CPU_SH7619] = "SH7619", - [CPU_SH7300] = "SH7300", [CPU_SH7705] = "SH7705", [CPU_SH7706] = "SH7706", [CPU_SH7707] = "SH7707", [CPU_SH7708] = "SH7708", [CPU_SH7709] = "SH7709", [CPU_SH7710] = "SH7710", diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c index 7aca37d7976..8a545d54e2d 100644 --- a/arch/sh/kernel/timers/timer-tmu.c +++ b/arch/sh/kernel/timers/timer-tmu.c @@ -173,8 +173,7 @@ static int tmu_timer_init(void) tmu_timer_stop(); -#if !defined(CONFIG_CPU_SUBTYPE_SH7300) && \ - !defined(CONFIG_CPU_SUBTYPE_SH7760) && \ +#if !defined(CONFIG_CPU_SUBTYPE_SH7760) && \ !defined(CONFIG_CPU_SUBTYPE_SH7785) && \ !defined(CONFIG_CPU_SUBTYPE_SHX3) ctrl_outb(TMU_TOCR_INIT, TMU_TOCR); diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index ff67422c8dc..43f3972a5fb 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -63,10 +63,6 @@ config CPU_SUBTYPE_SH7206 # SH-3 Processor Support -config CPU_SUBTYPE_SH7300 - bool "Support SH7300 processor" - select CPU_SH3 - config CPU_SUBTYPE_SH7705 bool "Support SH7705 processor" select CPU_SH3 diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types index 21d18351af7..439bfe3d29a 100644 --- a/arch/sh/tools/mach-types +++ b/arch/sh/tools/mach-types @@ -8,7 +8,6 @@ SE SH_SOLUTION_ENGINE 7751SE SH_7751_SOLUTION_ENGINE 7722SE SH_7722_SOLUTION_ENGINE -7300SE SH_7300_SOLUTION_ENGINE 7343SE SH_7343_SOLUTION_ENGINE 7206SE SH_7206_SOLUTION_ENGINE 7619SE SH_7619_SOLUTION_ENGINE -- cgit v1.2.3-18-g5258