From 48ff3e04ffd5e1b578462eb1958f15ca122c7fbf Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 28 Sep 2009 15:04:04 +0900
Subject: sh: Handle ioport_map() cases for >= P1SEG addresses.
This fixes up the case where certain drivers already do their own
remapping and subsequently attempt to use the PIO calls for I/O. In this
case there is no additional remapping that needs to be done, and the
address can be casted in to the cookie directly.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
arch/sh/kernel/io_generic.c | 3 +++
1 file changed, 3 insertions(+)
(limited to 'arch/sh')
diff --git a/arch/sh/kernel/io_generic.c b/arch/sh/kernel/io_generic.c
index 4ff50723928..b8fa6524760 100644
--- a/arch/sh/kernel/io_generic.c
+++ b/arch/sh/kernel/io_generic.c
@@ -147,6 +147,9 @@ void generic_outsl(unsigned long port, const void *src, unsigned long count)
void __iomem *generic_ioport_map(unsigned long addr, unsigned int size)
{
+ if (PXSEG(addr) >= P1SEG)
+ return (void __iomem *)addr;
+
return (void __iomem *)(addr + generic_io_base);
}
--
cgit v1.2.3-18-g5258
From d44ee12ad61ff7aa7a6344560bd430cb72fcbc27 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 28 Sep 2009 15:05:41 +0900
Subject: sh: Set the default I/O port base to P2SEG.
This bumps up the default I/O base to P2SEG, which allows legacy probing
to bail out gracefully rather than oopsing. Platforms that have a real
PIO offset still need to fix this up on their own, although most
platforms are content with P2SEG already.
The previous change to teach ioport_map() about >= P1SEG offsets in
combination with this patch allows both the already remapped and the
legacy address probing to pass through and succeed.
Fixes up an oops with i8042 on the sh7785lcr board.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
arch/sh/kernel/machvec.c | 3 +++
1 file changed, 3 insertions(+)
(limited to 'arch/sh')
diff --git a/arch/sh/kernel/machvec.c b/arch/sh/kernel/machvec.c
index 548f6607fd0..cbce639b108 100644
--- a/arch/sh/kernel/machvec.c
+++ b/arch/sh/kernel/machvec.c
@@ -14,6 +14,7 @@
#include <linux/string.h>
#include <asm/machvec.h>
#include <asm/sections.h>
+#include <asm/addrspace.h>
#include <asm/setup.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -133,4 +134,6 @@ void __init sh_mv_setup(void)
if (!sh_mv.mv_nr_irqs)
sh_mv.mv_nr_irqs = NR_IRQS;
+
+ __set_io_port_base(P2SEG);
}
--
cgit v1.2.3-18-g5258
From 421f7a5dbdd1720c718eed187c46cf202529cf7d Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Sat, 26 Sep 2009 19:44:05 +0000
Subject: sh: Don't enable interrupts in the page fault path
There's already code in do_page_fault() to conditionally enable
interrupts, so we don't need to unconditonally enable them before
calling it. This fixes a lockdep warning where we called
trace_hardirqs_off() but with irqs still enabled.
Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
arch/sh/kernel/cpu/sh3/entry.S | 2 --
1 file changed, 2 deletions(-)
(limited to 'arch/sh')
diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index 0151933e525..bb407ef0b91 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -152,8 +152,6 @@ call_do_page_fault:
mov.l 1f, r0
mov.l @r0, r6
- sti
-
mov.l 3f, r0
mov.l 4f, r1
mov r15, r4
--
cgit v1.2.3-18-g5258
From fe1dbfd3f992d5432d7463a5bd6c2fc96d3eccd8 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 28 Sep 2009 15:22:10 +0900
Subject: sh: magicpanelr2 and dreamcast can use the generic I/O base.
There is now no need for the magicpanelr2 and dreamcast platforms to set
their own I/O port bas values, given that the generic machvec code now
sets this to P2SEG for everyone.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
arch/sh/boards/board-magicpanelr2.c | 2 --
arch/sh/boards/mach-dreamcast/setup.c | 2 --
2 files changed, 4 deletions(-)
(limited to 'arch/sh')
diff --git a/arch/sh/boards/board-magicpanelr2.c b/arch/sh/boards/board-magicpanelr2.c
index 0a37c8bfc95..99ffc5f1c0d 100644
--- a/arch/sh/boards/board-magicpanelr2.c
+++ b/arch/sh/boards/board-magicpanelr2.c
@@ -205,8 +205,6 @@ static void __init setup_port_multiplexing(void)
static void __init mpr2_setup(char **cmdline_p)
{
- __set_io_port_base(0xa0000000);
-
/* set Pin Select Register A:
* /PCC_CD1, /PCC_CD2, PCC_BVD1, PCC_BVD2,
* /IOIS16, IRQ4, IRQ5, USB1d_SUSPEND
diff --git a/arch/sh/boards/mach-dreamcast/setup.c b/arch/sh/boards/mach-dreamcast/setup.c
index ebe99227d4e..a4b7402d617 100644
--- a/arch/sh/boards/mach-dreamcast/setup.c
+++ b/arch/sh/boards/mach-dreamcast/setup.c
@@ -42,8 +42,6 @@ static void __init dreamcast_setup(char **cmdline_p)
/* Acknowledge any previous events */
/* XXX */
- __set_io_port_base(0xa0000000);
-
/* Assign all virtual IRQs to the System ASIC int. handler */
for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++)
set_irq_chip_and_handler(i, &systemasic_int,
--
cgit v1.2.3-18-g5258
From 8810e0553fec6ff0a0db1431e388de39e2a2a512 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Mon, 28 Sep 2009 08:21:41 +0000
Subject: sh: mach-ecovec24: Add TouchScreen support
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
arch/sh/boards/mach-ecovec24/setup.c | 42 ++++++++++++++++++++++++++++++++++++
1 file changed, 42 insertions(+)
(limited to 'arch/sh')
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 5f9881e16e2..52912a6149c 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -18,6 +18,7 @@
#include <linux/delay.h>
#include <linux/usb/r8a66597.h>
#include <linux/i2c.h>
+#include <linux/i2c/tsc2007.h>
#include <linux/input.h>
#include <video/sh_mobile_lcdc.h>
#include <media/sh_mobile_ceu.h>
@@ -376,6 +377,43 @@ static struct platform_device keysc_device = {
},
};
+/* TouchScreen */
+#define IRQ0 32
+static int ts_get_pendown_state(void)
+{
+ int val = 0;
+ gpio_free(GPIO_FN_INTC_IRQ0);
+ gpio_request(GPIO_PTZ0, NULL);
+ gpio_direction_input(GPIO_PTZ0);
+
+ val = gpio_get_value(GPIO_PTZ0);
+
+ gpio_free(GPIO_PTZ0);
+ gpio_request(GPIO_FN_INTC_IRQ0, NULL);
+
+ return val ? 0 : 1;
+}
+
+static int ts_init(void)
+{
+ gpio_request(GPIO_FN_INTC_IRQ0, NULL);
+ return 0;
+}
+
+struct tsc2007_platform_data tsc2007_info = {
+ .model = 2007,
+ .x_plate_ohms = 180,
+ .get_pendown_state = ts_get_pendown_state,
+ .init_platform_hw = ts_init,
+};
+
+static struct i2c_board_info ts_i2c_clients = {
+ I2C_BOARD_INFO("tsc2007", 0x48),
+ .type = "tsc2007",
+ .platform_data = &tsc2007_info,
+ .irq = IRQ0,
+};
+
static struct platform_device *ecovec_devices[] __initdata = {
&heartbeat_device,
&nor_flash_device,
@@ -590,6 +628,10 @@ static int __init arch_setup(void)
*/
gpio_request(GPIO_PTF4, NULL);
gpio_direction_output(GPIO_PTF4, 1);
+
+ /* enable TouchScreen */
+ i2c_register_board_info(0, &ts_i2c_clients, 1);
+ set_irq_type(IRQ0, IRQ_TYPE_LEVEL_LOW);
}
/* enable CEU0 */
--
cgit v1.2.3-18-g5258
From d5ce010c0327dee0a08a791827156ba84c544eea Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Wed, 30 Sep 2009 00:50:30 +0000
Subject: sh: mach-ecovec24: modify 1st MTD area to read only
Tested-by: Yusuke Goda <goda.yusuke@renesas.com>
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
arch/sh/boards/mach-ecovec24/setup.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
(limited to 'arch/sh')
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 52912a6149c..0fb665d2860 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -71,7 +71,7 @@ static struct mtd_partition nor_flash_partitions[] = {
.name = "boot loader",
.offset = 0,
.size = (5 * 1024 * 1024),
- .mask_flags = MTD_CAP_ROM,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
}, {
.name = "free-area",
.offset = MTDPART_OFS_APPEND,
--
cgit v1.2.3-18-g5258
From 8406638ab041b3f1ab3d49d6fe1989e25f3ffcad Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 30 Sep 2009 14:02:42 +0900
Subject: sh: Disable unaligned kernel access printks by default.
Certain networking and USB workloads generate floods of these accesses,
so just disable it by default (thereby restoring the old behaviour). The
option remains configurable from userspace, and can still be used as a
debugging aid.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
arch/sh/kernel/traps_32.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
(limited to 'arch/sh')
diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index 69bb1652ecc..e0b5e4b5acc 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -54,8 +54,8 @@ static unsigned long se_multi;
/* bitfield: 1: warn 2: fixup 4: signal -> combinations 2|4 && 1|2|4 are not
valid! */
static int se_usermode = 3;
-/* 0: no warning 1: print a warning message */
-static int se_kernmode_warn = 1;
+/* 0: no warning 1: print a warning message, disabled by default */
+static int se_kernmode_warn;
#ifdef CONFIG_PROC_FS
static const char *se_usermode_action[] = {
--
cgit v1.2.3-18-g5258
From f16bf3e2e4076d4c20d9344d51fc6c4e43542e97 Mon Sep 17 00:00:00 2001
From: Lubomir Rintel <lkundrak@v3.sk>
Date: Wed, 30 Sep 2009 06:17:34 +0000
Subject: sh: Build fix: export __movmem
ERROR: "__movmem" [net/irda/irda.ko] undefined!
ERROR: "__movmem" [fs/nfsd/nfsd.ko] undefined!
ERROR: "__movmem" [fs/lockd/lockd.ko] undefined!
ERROR: "__movmem" [crypto/sha1_generic.ko] undefined!
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
arch/sh/kernel/sh_ksyms_32.c | 1 +
1 file changed, 1 insertion(+)
(limited to 'arch/sh')
diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c
index 8dbe26b17c4..86c27042835 100644
--- a/arch/sh/kernel/sh_ksyms_32.c
+++ b/arch/sh/kernel/sh_ksyms_32.c
@@ -84,6 +84,7 @@ DECLARE_EXPORT(__movstrSI60);
DECLARE_EXPORT(__movstr_i4_even);
DECLARE_EXPORT(__movstr_i4_odd);
DECLARE_EXPORT(__movstrSI12_i4);
+DECLARE_EXPORT(__movmem);
DECLARE_EXPORT(__movmem_i4_even);
DECLARE_EXPORT(__movmem_i4_odd);
DECLARE_EXPORT(__movmemSI12_i4);
--
cgit v1.2.3-18-g5258
From 9c472c4dd892b75c19d13b8fdbe35fbb09bdbd0d Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Fri, 2 Oct 2009 07:52:20 +0000
Subject: sh: mach-ecovec24: Document DS2 switch settings.
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
arch/sh/boards/mach-ecovec24/setup.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
(limited to 'arch/sh')
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 0fb665d2860..bbc7859433b 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -39,6 +39,20 @@
* 0x1800_0000 MFI 16bit
*/
+/* SWITCH
+ *------------------------------
+ * DS2[1] = FlashROM write protect ON : write protect
+ * OFF : No write protect
+ * DS2[2] = RMII / TS, SCIF ON : RMII
+ * OFF : TS, SCIF3
+ * DS2[3] = Camera / Video ON : Camera
+ * OFF : NTSC/PAL (IN)
+ * DS2[5] = NTSC_OUT Clock ON : On board OSC
+ * OFF : SH7724 DV_CLK
+ * DS2[6-7] = MMC / SD ON-OFF : SD
+ * OFF-ON : MMC
+ */
+
/* Heartbeat */
static unsigned char led_pos[] = { 0, 1, 2, 3 };
static struct heartbeat_data heartbeat_data = {
--
cgit v1.2.3-18-g5258
From f78bab30707e043bc16c5b11ebff794c123f68c1 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Wed, 7 Oct 2009 09:00:06 +0000
Subject: sh: enable sleep state LEDs on Ecovec24
Extend the ecovec24 board code to enable Power
Management LEDs showing the current sh7724 sleep state.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
arch/sh/boards/mach-ecovec24/setup.c | 5 +++++
1 file changed, 5 insertions(+)
(limited to 'arch/sh')
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index bbc7859433b..3b1ceb46fa5 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -512,6 +512,11 @@ static void __init sh_eth_init(void)
#define IODRIVEA 0xA405018A
static int __init arch_setup(void)
{
+ /* enable STATUS0, STATUS2 and PDSTATUS */
+ gpio_request(GPIO_FN_STATUS0, NULL);
+ gpio_request(GPIO_FN_STATUS2, NULL);
+ gpio_request(GPIO_FN_PDSTATUS, NULL);
+
/* enable SCIFA0 */
gpio_request(GPIO_FN_SCIF0_TXD, NULL);
gpio_request(GPIO_FN_SCIF0_RXD, NULL);
--
cgit v1.2.3-18-g5258
From a6325247f50628c7e53a483807d0ef2c24a7aa90 Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Tue, 6 Oct 2009 21:22:21 +0000
Subject: sh: Sprinkle __uses_jump_to_uncached
Fix some callers of jump_to_uncached() and back_to_cached() that were
not annotated with __uses_jump_to_uncached.
Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
arch/sh/mm/cache-sh4.c | 2 +-
arch/sh/mm/cache-sh7705.c | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
(limited to 'arch/sh')
diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index b2453bbef4c..a98c7d8984f 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -43,7 +43,7 @@ static void (*__flush_dcache_segment_fn)(unsigned long, unsigned long) =
* Called from kernel/module.c:sys_init_module and routine for a.out format,
* signal handler code and kprobes code
*/
-static void sh4_flush_icache_range(void *args)
+static void __uses_jump_to_uncached sh4_flush_icache_range(void *args)
{
struct flusher_data *data = args;
unsigned long start, end;
diff --git a/arch/sh/mm/cache-sh7705.c b/arch/sh/mm/cache-sh7705.c
index 2cadee2037a..2601935eb58 100644
--- a/arch/sh/mm/cache-sh7705.c
+++ b/arch/sh/mm/cache-sh7705.c
@@ -78,7 +78,7 @@ static void sh7705_flush_icache_range(void *args)
/*
* Writeback&Invalidate the D-cache of the page
*/
-static void __flush_dcache_page(unsigned long phys)
+static void __uses_jump_to_uncached __flush_dcache_page(unsigned long phys)
{
unsigned long ways, waysize, addrstart;
unsigned long flags;
@@ -144,7 +144,7 @@ static void sh7705_flush_dcache_page(void *arg)
__flush_dcache_page(PHYSADDR(page_address(page)));
}
-static void sh7705_flush_cache_all(void *args)
+static void __uses_jump_to_uncached sh7705_flush_cache_all(void *args)
{
unsigned long flags;
--
cgit v1.2.3-18-g5258
From fc2bdefdde89b54d8fcde7bbf7d0adc0ce5cb044 Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Tue, 6 Oct 2009 21:22:22 +0000
Subject: sh: Plug PMB alloc memory leak
If we fail to allocate a PMB entry in pmb_remap() we must remember to
clear and free any PMB entries that we may have previously allocated,
e.g. if we were allocating a multiple entry mapping.
Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
arch/sh/mm/pmb.c | 30 ++++++++++++++++++++++++------
1 file changed, 24 insertions(+), 6 deletions(-)
(limited to 'arch/sh')
diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c
index b1a714a92b1..58f935896b4 100644
--- a/arch/sh/mm/pmb.c
+++ b/arch/sh/mm/pmb.c
@@ -33,6 +33,8 @@
#define NR_PMB_ENTRIES 16
+static void __pmb_unmap(struct pmb_entry *);
+
static struct kmem_cache *pmb_cache;
static unsigned long pmb_map;
@@ -218,9 +220,10 @@ static struct {
long pmb_remap(unsigned long vaddr, unsigned long phys,
unsigned long size, unsigned long flags)
{
- struct pmb_entry *pmbp;
+ struct pmb_entry *pmbp, *pmbe;
unsigned long wanted;
int pmb_flags, i;
+ long err;
/* Convert typical pgprot value to the PMB equivalent */
if (flags & _PAGE_CACHABLE) {
@@ -236,20 +239,22 @@ long pmb_remap(unsigned long vaddr, unsigned long phys,
again:
for (i = 0; i < ARRAY_SIZE(pmb_sizes); i++) {
- struct pmb_entry *pmbe;
int ret;
if (size < pmb_sizes[i].size)
continue;
pmbe = pmb_alloc(vaddr, phys, pmb_flags | pmb_sizes[i].flag);
- if (IS_ERR(pmbe))
- return PTR_ERR(pmbe);
+ if (IS_ERR(pmbe)) {
+ err = PTR_ERR(pmbe);
+ goto out;
+ }
ret = set_pmb_entry(pmbe);
if (ret != 0) {
pmb_free(pmbe);
- return -EBUSY;
+ err = -EBUSY;
+ goto out;
}
phys += pmb_sizes[i].size;
@@ -270,6 +275,12 @@ again:
goto again;
return wanted - size;
+
+out:
+ if (pmbp)
+ __pmb_unmap(pmbp);
+
+ return err;
}
void pmb_unmap(unsigned long addr)
@@ -283,12 +294,19 @@ void pmb_unmap(unsigned long addr)
if (unlikely(!pmbe))
return;
+ __pmb_unmap(pmbe);
+}
+
+static void __pmb_unmap(struct pmb_entry *pmbe)
+{
WARN_ON(!test_bit(pmbe->entry, &pmb_map));
do {
struct pmb_entry *pmblink = pmbe;
- clear_pmb_entry(pmbe);
+ if (pmbe->entry != PMB_NO_ENTRY)
+ clear_pmb_entry(pmbe);
+
pmbe = pmblink->link;
pmb_free(pmblink);
--
cgit v1.2.3-18-g5258
From 2bea7ea7d57fd0022f4cd08ed3d4eb2d39a2920d Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Tue, 6 Oct 2009 21:22:27 +0000
Subject: sh: Try PMB mapping based on physical address, not mapping size
We should favour PMB mappings when the physical address cannot be
reached with 29-bits.
Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
arch/sh/mm/ioremap_32.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
(limited to 'arch/sh')
diff --git a/arch/sh/mm/ioremap_32.c b/arch/sh/mm/ioremap_32.c
index c3250614e3a..a86eaa9d75a 100644
--- a/arch/sh/mm/ioremap_32.c
+++ b/arch/sh/mm/ioremap_32.c
@@ -83,7 +83,7 @@ void __iomem *__ioremap(unsigned long phys_addr, unsigned long size,
*
* PMB entries are all pre-faulted.
*/
- if (unlikely(size >= 0x1000000)) {
+ if (unlikely(phys_addr >= P1SEG)) {
unsigned long mapped = pmb_remap(addr, phys_addr, size, flags);
if (likely(mapped)) {
--
cgit v1.2.3-18-g5258
From a2767cfb1d9d97c3f861743f1ad595a80b75ec99 Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Tue, 6 Oct 2009 21:22:34 +0000
Subject: sh: Don't allocate smaller sized mappings on every iteration
Currently, we've got the less than ideal situation where if we need to
allocate a 256MB mapping we'll allocate four entries like so,
entry 1: 128MB
entry 2: 64MB
entry 3: 16MB
entry 4: 16MB
This is because as we execute the loop in pmb_remap() we will
progressively try mapping the remaining address space with smaller and
smaller sizes. This isn't good because the size we use on one iteration
may be the perfect size to use on the next iteration, for instance when
the initial size is divisible by one of the PMB mapping sizes.
With this patch, we now only need two entries in the PMB to map 256MB of
address space,
entry 1: 128MB
entry 2: 128MB
Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
arch/sh/mm/pmb.c | 7 +++++++
1 file changed, 7 insertions(+)
(limited to 'arch/sh')
diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c
index 58f935896b4..aade3110211 100644
--- a/arch/sh/mm/pmb.c
+++ b/arch/sh/mm/pmb.c
@@ -269,6 +269,13 @@ again:
pmbp->link = pmbe;
pmbp = pmbe;
+
+ /*
+ * Instead of trying smaller sizes on every iteration
+ * (even if we succeed in allocating space), try using
+ * pmb_sizes[i].size again.
+ */
+ i--;
}
if (size >= 0x1000000)
--
cgit v1.2.3-18-g5258
From af67c3a9e68ee0a9e30ee8582577408adba0e299 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 13 Oct 2009 10:57:52 +0900
Subject: sh: update die() output.
This follows the ARM change, as SH had all of the same issues:
Make die() better match x86:
- add printing of the last accessed sysfs file
- ensure console_verbose() is called under the lock
- ensure we panic outside of oops_exit()
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
arch/sh/kernel/traps_32.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
(limited to 'arch/sh')
diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index e0b5e4b5acc..7a2ee3a6b8e 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -25,6 +25,7 @@
#include <linux/kexec.h>
#include <linux/limits.h>
#include <linux/proc_fs.h>
+#include <linux/sysfs.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/fpu.h>
@@ -159,12 +160,12 @@ void die(const char * str, struct pt_regs * regs, long err)
oops_enter();
- console_verbose();
spin_lock_irq(&die_lock);
+ console_verbose();
bust_spinlocks(1);
printk("%s: %04lx [#%d]\n", str, err & 0xffff, ++die_counter);
-
+ sysfs_printk_last_file();
print_modules();
show_regs(regs);
@@ -180,6 +181,7 @@ void die(const char * str, struct pt_regs * regs, long err)
bust_spinlocks(0);
add_taint(TAINT_DIE);
spin_unlock_irq(&die_lock);
+ oops_exit();
if (kexec_should_crash(current))
crash_kexec(regs);
@@ -190,7 +192,6 @@ void die(const char * str, struct pt_regs * regs, long err)
if (panic_on_oops)
panic("Fatal exception");
- oops_exit();
do_exit(SIGSEGV);
}
--
cgit v1.2.3-18-g5258
From 964f7e5a56814b32c727821de77d22bd7ef782bc Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 13 Oct 2009 11:18:34 +0900
Subject: sh: force dcache flush if dcache_dirty bit set.
This too follows the ARM change, given that the issue at hand applies to
all platforms that implement lazy D-cache writeback.
This fixes up the case when a page mapping disappears between the
flush_dcache_page() call (when PG_dcache_dirty is set for the page) and
the update_mmu_cache() call -- such as in the case of swap cache being
freed early. This kills off the mapping test in update_mmu_cache() and
switches to simply testing for PG_dcache_dirty.
Reported-by: Nitin Gupta <ngupta@vflare.org>
Reported-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
arch/sh/mm/cache.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
(limited to 'arch/sh')
diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c
index 35c37b7f717..5e1091be9dc 100644
--- a/arch/sh/mm/cache.c
+++ b/arch/sh/mm/cache.c
@@ -128,7 +128,7 @@ void __update_cache(struct vm_area_struct *vma,
return;
page = pfn_to_page(pfn);
- if (pfn_valid(pfn) && page_mapping(page)) {
+ if (pfn_valid(pfn)) {
int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags);
if (dirty) {
unsigned long addr = (unsigned long)page_address(page);
--
cgit v1.2.3-18-g5258
From 99222622422ac3398a846645f190109e218c743c Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 13 Oct 2009 12:42:48 +0900
Subject: sh: ftrace: Fix up syscall tracepoint support.
Sync up with latest core changes in the syscalls tracing area:
- tracing: Map syscall name to number (syscall_name_to_nr())
- tracing: Call arch_init_ftrace_syscalls at boot
- tracing: add support tracepoint ids (set_syscall_{enter,exit}_id())
Taken from the s390 change.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
arch/sh/kernel/ftrace.c | 37 +++++++++++++++++++++++++++----------
1 file changed, 27 insertions(+), 10 deletions(-)
(limited to 'arch/sh')
diff --git a/arch/sh/kernel/ftrace.c b/arch/sh/kernel/ftrace.c
index a3dcc6d5d25..2c48e267256 100644
--- a/arch/sh/kernel/ftrace.c
+++ b/arch/sh/kernel/ftrace.c
@@ -291,31 +291,48 @@ struct syscall_metadata *syscall_nr_to_meta(int nr)
return syscalls_metadata[nr];
}
-void arch_init_ftrace_syscalls(void)
+int syscall_name_to_nr(char *name)
+{
+ int i;
+
+ if (!syscalls_metadata)
+ return -1;
+ for (i = 0; i < NR_syscalls; i++)
+ if (syscalls_metadata[i])
+ if (!strcmp(syscalls_metadata[i]->name, name))
+ return i;
+ return -1;
+}
+
+void set_syscall_enter_id(int num, int id)
+{
+ syscalls_metadata[num]->enter_id = id;
+}
+
+void set_syscall_exit_id(int num, int id)
+{
+ syscalls_metadata[num]->exit_id = id;
+}
+
+static int __init arch_init_ftrace_syscalls(void)
{
int i;
struct syscall_metadata *meta;
unsigned long **psys_syscall_table = &sys_call_table;
- static atomic_t refs;
-
- if (atomic_inc_return(&refs) != 1)
- goto end;
syscalls_metadata = kzalloc(sizeof(*syscalls_metadata) *
FTRACE_SYSCALL_MAX, GFP_KERNEL);
if (!syscalls_metadata) {
WARN_ON(1);
- return;
+ return -ENOMEM;
}
for (i = 0; i < FTRACE_SYSCALL_MAX; i++) {
meta = find_syscall_meta(psys_syscall_table[i]);
syscalls_metadata[i] = meta;
}
- return;
- /* Paranoid: avoid overflow */
-end:
- atomic_dec(&refs);
+ return 0;
}
+arch_initcall(arch_init_ftrace_syscalls);
#endif /* CONFIG_FTRACE_SYSCALLS */
--
cgit v1.2.3-18-g5258
From eaa47704d950d7f85b41a314a00529fb2615c10e Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 14 Oct 2009 14:12:41 +0900
Subject: sh: Use boot_cpu_data for FPU tests in sigcontext paths.
We do not want to use smp_processor_id() from these paths, as they trip
preempt BUGs. Switch the test over to the boot cpu directly.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
arch/sh/kernel/signal_32.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
(limited to 'arch/sh')
diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c
index 6729703547a..55d1f814e34 100644
--- a/arch/sh/kernel/signal_32.c
+++ b/arch/sh/kernel/signal_32.c
@@ -145,7 +145,7 @@ static inline int restore_sigcontext_fpu(struct sigcontext __user *sc)
{
struct task_struct *tsk = current;
- if (!(current_cpu_data.flags & CPU_HAS_FPU))
+ if (!(boot_cpu_data.flags & CPU_HAS_FPU))
return 0;
set_used_math();
@@ -158,7 +158,7 @@ static inline int save_sigcontext_fpu(struct sigcontext __user *sc,
{
struct task_struct *tsk = current;
- if (!(current_cpu_data.flags & CPU_HAS_FPU))
+ if (!(boot_cpu_data.flags & CPU_HAS_FPU))
return 0;
if (!used_math()) {
@@ -199,7 +199,7 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *r0_p
#undef COPY
#ifdef CONFIG_SH_FPU
- if (current_cpu_data.flags & CPU_HAS_FPU) {
+ if (boot_cpu_data.flags & CPU_HAS_FPU) {
int owned_fp;
struct task_struct *tsk = current;
--
cgit v1.2.3-18-g5258
From 2908df9e2ce85e4de19ba81ac619acdf93a8bfaa Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 14 Oct 2009 14:13:41 +0900
Subject: sh: Tidy up SMP cpuinfo.
Trivial change for cleaning up the cpuinfo pretty printing on SMP, adds a
newline between CPUs.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
arch/sh/kernel/setup.c | 2 ++
1 file changed, 2 insertions(+)
(limited to 'arch/sh')
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index f9d44f8e0df..99b4fb553bf 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -549,6 +549,8 @@ static int show_cpuinfo(struct seq_file *m, void *v)
if (cpu == 0)
seq_printf(m, "machine\t\t: %s\n", get_system_type());
+ else
+ seq_printf(m, "\n");
seq_printf(m, "processor\t: %d\n", cpu);
seq_printf(m, "cpu family\t: %s\n", init_utsname()->machine);
--
cgit v1.2.3-18-g5258
From a66c2edea56c291a6f6a52f07496ebb97c0880e8 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 14 Oct 2009 14:14:30 +0900
Subject: sh: Populate initial secondary CPU info from boot_cpu_data.
The secondary CPU info was seeing corrupted results due to not entering
all of the setup paths taken by the boot CPU. So we just memcpy() the
boot cpu data over directly, and then fix up the per-CPU bits.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
arch/sh/kernel/smp.c | 2 ++
1 file changed, 2 insertions(+)
(limited to 'arch/sh')
diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c
index 442d8d47a41..160db1003cf 100644
--- a/arch/sh/kernel/smp.c
+++ b/arch/sh/kernel/smp.c
@@ -35,6 +35,8 @@ static inline void __init smp_store_cpu_info(unsigned int cpu)
{
struct sh_cpuinfo *c = cpu_data + cpu;
+ memcpy(c, &boot_cpu_data, sizeof(struct sh_cpuinfo));
+
c->loops_per_jiffy = loops_per_jiffy;
}
--
cgit v1.2.3-18-g5258
From 4d2947f7c69f812f09ff0e5cdc98dfa5317a4d81 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 14 Oct 2009 14:21:40 +0900
Subject: sh: Optimize the setup_rt_frame() I-cache flush.
This only needs to flush the return code via the legacy path, and just
invalidates uselessly otherwise. This makes the behaviour consistent for
all of the trampoline setup paths.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
arch/sh/kernel/signal_32.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
(limited to 'arch/sh')
diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c
index 55d1f814e34..3db37425210 100644
--- a/arch/sh/kernel/signal_32.c
+++ b/arch/sh/kernel/signal_32.c
@@ -472,6 +472,7 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
err |= __put_user(OR_R0_R0, &frame->retcode[6]);
err |= __put_user((__NR_rt_sigreturn), &frame->retcode[7]);
regs->pr = (unsigned long) frame->retcode;
+ flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode));
}
if (err)
@@ -497,8 +498,6 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
current->comm, task_pid_nr(current), frame, regs->pc, regs->pr);
- flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode));
-
return 0;
give_sigsegv:
--
cgit v1.2.3-18-g5258
From 457b646189e47f9d48588809da3e806ec363f219 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 14 Oct 2009 15:50:28 +0900
Subject: sh: Fix a TRACE_IRQS_OFF typo.
The resume_userspace path had TRACE_IRQS_OFF written incorrectly and so
never handled the transition properly. This was fixed once before but
seems to have made it back in the tree. Fix it for good.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
arch/sh/kernel/entry-common.S | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
(limited to 'arch/sh')
diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S
index 68d9223b145..3eb84931d2a 100644
--- a/arch/sh/kernel/entry-common.S
+++ b/arch/sh/kernel/entry-common.S
@@ -121,7 +121,7 @@ noresched:
ENTRY(resume_userspace)
! r8: current_thread_info
cli
- TRACE_IRQS_OfF
+ TRACE_IRQS_OFF
mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags
tst #(_TIF_WORK_MASK & 0xff), r0
bt/s __restore_all
--
cgit v1.2.3-18-g5258
From a7a7c0e1d12bcfb4a96cae439951232b08c91841 Mon Sep 17 00:00:00 2001
From: Valentin Sitdikov <valentin.sitdikov@siemens.com>
Date: Fri, 16 Oct 2009 14:15:38 +0900
Subject: sh: Fix up single page flushing to use PAGE_SIZE.
Presently The SH-4 cache flushing code uses flush_cache_4096() for most
of the real flushing work, which breaks down to a fixed 4096 unroll and
increment. Not only is this sub-optimal for larger page sizes, it's also
uncovered a bug in sh4_flush_dcache_page() when large page sizes are used
and we have no cache aliases -- resulting in only a part of the page's
D-cache lines being written back.
Signed-off-by: Valentin Sitdikov <valentin.sitdikov@siemens.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
arch/sh/mm/cache-sh4.c | 22 ++++++++++------------
1 file changed, 10 insertions(+), 12 deletions(-)
(limited to 'arch/sh')
diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index a98c7d8984f..519e2d16cd0 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -26,7 +26,7 @@
#define MAX_DCACHE_PAGES 64 /* XXX: Tune for ways */
#define MAX_ICACHE_PAGES 32
-static void __flush_cache_4096(unsigned long addr, unsigned long phys,
+static void __flush_cache_one(unsigned long addr, unsigned long phys,
unsigned long exec_offset);
/*
@@ -89,8 +89,7 @@ static void __uses_jump_to_uncached sh4_flush_icache_range(void *args)
local_irq_restore(flags);
}
-static inline void flush_cache_4096(unsigned long start,
- unsigned long phys)
+static inline void flush_cache_one(unsigned long start, unsigned long phys)
{
unsigned long flags, exec_offset = 0;
@@ -103,8 +102,7 @@ static inline void flush_cache_4096(unsigned long start,
exec_offset = 0x20000000;
local_irq_save(flags);
- __flush_cache_4096(start | SH_CACHE_ASSOC,
- P1SEGADDR(phys), exec_offset);
+ __flush_cache_one(start | SH_CACHE_ASSOC, P1SEGADDR(phys), exec_offset);
local_irq_restore(flags);
}
@@ -129,8 +127,8 @@ static void sh4_flush_dcache_page(void *arg)
/* Loop all the D-cache */
n = boot_cpu_data.dcache.n_aliases;
- for (i = 0; i < n; i++, addr += 4096)
- flush_cache_4096(addr, phys);
+ for (i = 0; i < n; i++, addr += PAGE_SIZE)
+ flush_cache_one(addr, phys);
}
wmb();
@@ -318,11 +316,11 @@ static void sh4_flush_cache_page(void *args)
/* We only need to flush D-cache when we have alias */
if ((address^phys) & alias_mask) {
/* Loop 4K of the D-cache */
- flush_cache_4096(
+ flush_cache_one(
CACHE_OC_ADDRESS_ARRAY | (address & alias_mask),
phys);
/* Loop another 4K of the D-cache */
- flush_cache_4096(
+ flush_cache_one(
CACHE_OC_ADDRESS_ARRAY | (phys & alias_mask),
phys);
}
@@ -337,7 +335,7 @@ static void sh4_flush_cache_page(void *args)
* kernel has never executed the code through its identity
* translation.
*/
- flush_cache_4096(
+ flush_cache_one(
CACHE_IC_ADDRESS_ARRAY | (address & alias_mask),
phys);
}
@@ -393,7 +391,7 @@ static void sh4_flush_cache_range(void *args)
}
/**
- * __flush_cache_4096
+ * __flush_cache_one
*
* @addr: address in memory mapped cache array
* @phys: P1 address to flush (has to match tags if addr has 'A' bit
@@ -406,7 +404,7 @@ static void sh4_flush_cache_range(void *args)
* operation (purge/write-back) is selected by the lower 2 bits of
* 'phys'.
*/
-static void __flush_cache_4096(unsigned long addr, unsigned long phys,
+static void __flush_cache_one(unsigned long addr, unsigned long phys,
unsigned long exec_offset)
{
int way_count;
--
cgit v1.2.3-18-g5258
From 5fb80ae8bd7549034845ebfba694d483070b768b Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Fri, 16 Oct 2009 14:38:48 +0900
Subject: sh: disabled cache handling fix.
Add code to handle the cache disabled case. Fixes breakage introduced by
37443ef3f0406e855e169c87ae3f4ffb4b6ff635 ("sh: Migrate SH-4 cacheflush
ops to function pointers."). Without this patch configuring caches off
with CONFIG_CACHE_OFF=y makes kfr2r09 and migo-r lock up in fbdev
deferred io or early user space.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
arch/sh/mm/cache.c | 10 ++++++++++
1 file changed, 10 insertions(+)
(limited to 'arch/sh')
diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c
index 5e1091be9dc..a2dc7f9ecc5 100644
--- a/arch/sh/mm/cache.c
+++ b/arch/sh/mm/cache.c
@@ -265,6 +265,8 @@ static void __init emit_cache_params(void)
void __init cpu_cache_init(void)
{
+ unsigned int cache_disabled = !(__raw_readl(CCR) & CCR_CACHE_ENABLE);
+
compute_alias(&boot_cpu_data.icache);
compute_alias(&boot_cpu_data.dcache);
compute_alias(&boot_cpu_data.scache);
@@ -273,6 +275,13 @@ void __init cpu_cache_init(void)
__flush_purge_region = noop__flush_region;
__flush_invalidate_region = noop__flush_region;
+ /*
+ * No flushing is necessary in the disabled cache case so we can
+ * just keep the noop functions in local_flush_..() and __flush_..()
+ */
+ if (unlikely(cache_disabled))
+ goto skip;
+
if (boot_cpu_data.family == CPU_FAMILY_SH2) {
extern void __weak sh2_cache_init(void);
@@ -312,5 +321,6 @@ void __init cpu_cache_init(void)
sh5_cache_init();
}
+skip:
emit_cache_params();
}
--
cgit v1.2.3-18-g5258
From 52a94909f00e0ffceeac202e517a126d57c1c523 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Fri, 16 Oct 2009 14:42:33 +0900
Subject: sh: Remove BKL from landisk gio.
The open function got the BKL via the big push down. Replace it by
preempt_enable/disable as this is sufficient for an UP machine.
The ioctl can be unlocked because there is no functionality which
requires serialization. The usage by multiple callers is broken with
and without the BKL due to the local static variable addr.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
arch/sh/boards/mach-landisk/gio.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
(limited to 'arch/sh')
diff --git a/arch/sh/boards/mach-landisk/gio.c b/arch/sh/boards/mach-landisk/gio.c
index 25cdf735800..52801318819 100644
--- a/arch/sh/boards/mach-landisk/gio.c
+++ b/arch/sh/boards/mach-landisk/gio.c
@@ -14,7 +14,6 @@
*/
#include <linux/module.h>
#include <linux/init.h>
-#include <linux/smp_lock.h>
#include <linux/kdev_t.h>
#include <linux/cdev.h>
#include <linux/fs.h>
@@ -35,7 +34,7 @@ static int gio_open(struct inode *inode, struct file *filp)
int minor;
int ret = -ENOENT;
- lock_kernel();
+ preempt_disable();
minor = MINOR(inode->i_rdev);
if (minor < DEVCOUNT) {
if (openCnt > 0) {
@@ -45,7 +44,7 @@ static int gio_open(struct inode *inode, struct file *filp)
ret = 0;
}
}
- unlock_kernel();
+ preempt_enable();
return ret;
}
@@ -60,8 +59,7 @@ static int gio_close(struct inode *inode, struct file *filp)
return 0;
}
-static int gio_ioctl(struct inode *inode, struct file *filp,
- unsigned int cmd, unsigned long arg)
+static long gio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
unsigned int data;
static unsigned int addr = 0;
@@ -129,7 +127,7 @@ static const struct file_operations gio_fops = {
.owner = THIS_MODULE,
.open = gio_open, /* open */
.release = gio_close, /* release */
- .ioctl = gio_ioctl, /* ioctl */
+ .unlocked_ioctl = gio_ioctl,
};
static int __init gio_init(void)
--
cgit v1.2.3-18-g5258
From f875295c4bfb39e96d136edd8ac80567e73536b4 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 16 Oct 2009 18:14:19 +0900
Subject: sh: Kill off stray HAVE_FTRACE_SYSCALLS reference.
This seems to have popped back in via some merge damage. Kill it off.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
arch/sh/Kconfig | 1 -
1 file changed, 1 deletion(-)
(limited to 'arch/sh')
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index b940424f8cc..0dc7e3cbeff 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -37,7 +37,6 @@ config SUPERH32
select HAVE_FTRACE_MCOUNT_RECORD
select HAVE_DYNAMIC_FTRACE
select HAVE_FUNCTION_TRACE_MCOUNT_TEST
- select HAVE_FTRACE_SYSCALLS
select HAVE_FUNCTION_GRAPH_TRACER
select HAVE_ARCH_KGDB
select ARCH_HIBERNATION_POSSIBLE if MMU
--
cgit v1.2.3-18-g5258