From 37b7a97884ba64bf7d403351ac2a9476ab4f1bba Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 1 Nov 2010 09:49:04 -0400
Subject: sh: machvec IO death.

This takes a bit of a sledgehammer to the machvec I/O routines. The
iomem case requires no special casing and so can just be dropped
outright. This only leaves the ioport casing for PCI and SuperIO
mangling. With the SuperIO case going through the standard ioport
mapping, it's possible to replace everything with generic routines.

With this done the standard I/O routines are tidied up and NO_IOPORT
now gets default-enabled for the vast majority of boards.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig                       |   3 +-
 arch/sh/boards/board-secureedge5410.c |   2 -
 arch/sh/drivers/pci/pci.c             |   3 +-
 arch/sh/include/asm/io.h              | 345 ++++++++++++++++++----------------
 arch/sh/include/asm/io_generic.h      |  25 ---
 arch/sh/include/asm/machvec.h         |  21 ---
 arch/sh/kernel/Makefile               |   6 +-
 arch/sh/kernel/io_generic.c           | 180 ------------------
 arch/sh/kernel/iomap.c                | 165 ++++++++++++++++
 arch/sh/kernel/ioport.c               |  43 +++++
 arch/sh/kernel/machvec.c              |  22 ---
 11 files changed, 396 insertions(+), 419 deletions(-)
 delete mode 100644 arch/sh/kernel/io_generic.c
 create mode 100644 arch/sh/kernel/iomap.c
 create mode 100644 arch/sh/kernel/ioport.c

(limited to 'arch/sh')

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 5c075f562eb..32cd5f131e4 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -161,7 +161,8 @@ config ARCH_HAS_CPU_IDLE_WAIT
 	def_bool y
 
 config NO_IOPORT
-	bool
+	def_bool !PCI
+	depends on !SH_CAYMAN && !SH_SH4202_MICRODEV
 
 config IO_TRAPPED
 	bool
diff --git a/arch/sh/boards/board-secureedge5410.c b/arch/sh/boards/board-secureedge5410.c
index 32f875e8493..f968f17891a 100644
--- a/arch/sh/boards/board-secureedge5410.c
+++ b/arch/sh/boards/board-secureedge5410.c
@@ -29,8 +29,6 @@ unsigned short secureedge5410_ioport;
  */
 static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)
 {
-	ctrl_delay();	/* dummy read */
-
 	printk("SnapGear: erase switch interrupt!\n");
 
 	return IRQ_HANDLED;
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index 60ee09a4e12..a09c77dd09d 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -382,14 +382,13 @@ static void __iomem *ioport_map_pci(struct pci_dev *dev,
 	struct pci_channel *chan = dev->sysdata;
 
 	if (unlikely(!chan->io_map_base)) {
-		chan->io_map_base = generic_io_base;
+		chan->io_map_base = sh_io_port_base;
 
 		if (pci_domains_supported)
 			panic("To avoid data corruption io_map_base MUST be "
 			      "set with multiple PCI domains.");
 	}
 
-
 	return (void __iomem *)(chan->io_map_base + port);
 }
 
diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h
index b237d525d59..89ab2c57a4c 100644
--- a/arch/sh/include/asm/io.h
+++ b/arch/sh/include/asm/io.h
@@ -1,5 +1,6 @@
 #ifndef __ASM_SH_IO_H
 #define __ASM_SH_IO_H
+
 /*
  * Convention:
  *    read{b,w,l,q}/write{b,w,l,q} are for PCI,
@@ -15,12 +16,6 @@
  * SuperH specific I/O (raw I/O to on-chip CPU peripherals). In practice
  * these have the same semantics as the __raw variants, and as such, all
  * new code should be using the __raw versions.
- *
- * All ISA I/O routines are wrapped through the machine vector. If a
- * board does not provide overrides, a generic set that are copied in
- * from the default machine vector are used instead. These are largely
- * for old compat code for I/O offseting to SuperIOs, all of which are
- * better handled through the machvec ioport mapping routines these days.
  */
 #include <linux/errno.h>
 #include <asm/cache.h>
@@ -31,39 +26,10 @@
 #include <asm-generic/iomap.h>
 
 #ifdef __KERNEL__
-/*
- * Depending on which platform we are running on, we need different
- * I/O functions.
- */
-#define __IO_PREFIX	generic
+#define __IO_PREFIX     generic
 #include <asm/io_generic.h>
 #include <asm/io_trapped.h>
 
-#ifdef CONFIG_HAS_IOPORT
-
-#define inb(p)			sh_mv.mv_inb((p))
-#define inw(p)			sh_mv.mv_inw((p))
-#define inl(p)			sh_mv.mv_inl((p))
-#define outb(x,p)		sh_mv.mv_outb((x),(p))
-#define outw(x,p)		sh_mv.mv_outw((x),(p))
-#define outl(x,p)		sh_mv.mv_outl((x),(p))
-
-#define inb_p(p)		sh_mv.mv_inb_p((p))
-#define inw_p(p)		sh_mv.mv_inw_p((p))
-#define inl_p(p)		sh_mv.mv_inl_p((p))
-#define outb_p(x,p)		sh_mv.mv_outb_p((x),(p))
-#define outw_p(x,p)		sh_mv.mv_outw_p((x),(p))
-#define outl_p(x,p)		sh_mv.mv_outl_p((x),(p))
-
-#define insb(p,b,c)		sh_mv.mv_insb((p), (b), (c))
-#define insw(p,b,c)		sh_mv.mv_insw((p), (b), (c))
-#define insl(p,b,c)		sh_mv.mv_insl((p), (b), (c))
-#define outsb(p,b,c)		sh_mv.mv_outsb((p), (b), (c))
-#define outsw(p,b,c)		sh_mv.mv_outsw((p), (b), (c))
-#define outsl(p,b,c)		sh_mv.mv_outsl((p), (b), (c))
-
-#endif
-
 #define __raw_writeb(v,a)	(__chk_io_ptr(a), *(volatile u8  __force *)(a) = (v))
 #define __raw_writew(v,a)	(__chk_io_ptr(a), *(volatile u16 __force *)(a) = (v))
 #define __raw_writel(v,a)	(__chk_io_ptr(a), *(volatile u32 __force *)(a) = (v))
@@ -74,68 +40,39 @@
 #define __raw_readl(a)		(__chk_io_ptr(a), *(volatile u32 __force *)(a))
 #define __raw_readq(a)		(__chk_io_ptr(a), *(volatile u64 __force *)(a))
 
-#define readb(a)		({ u8  r_ = __raw_readb(a); mb(); r_; })
-#define readw(a)		({ u16 r_ = __raw_readw(a); mb(); r_; })
-#define readl(a)		({ u32 r_ = __raw_readl(a); mb(); r_; })
-#define readq(a)		({ u64 r_ = __raw_readq(a); mb(); r_; })
-
-#define writeb(v,a)		({ __raw_writeb((v),(a)); mb(); })
-#define writew(v,a)		({ __raw_writew((v),(a)); mb(); })
-#define writel(v,a)		({ __raw_writel((v),(a)); mb(); })
-#define writeq(v,a)		({ __raw_writeq((v),(a)); mb(); })
-
-/*
- * Legacy SuperH on-chip I/O functions
- *
- * These are all deprecated, all new (and especially cross-platform) code
- * should be using the __raw_xxx() routines directly.
- */
-static inline u8 __deprecated ctrl_inb(unsigned long addr)
-{
-	return __raw_readb(addr);
-}
-
-static inline u16 __deprecated ctrl_inw(unsigned long addr)
-{
-	return __raw_readw(addr);
-}
-
-static inline u32 __deprecated ctrl_inl(unsigned long addr)
-{
-	return __raw_readl(addr);
-}
-
-static inline u64 __deprecated ctrl_inq(unsigned long addr)
-{
-	return __raw_readq(addr);
-}
-
-static inline void __deprecated ctrl_outb(u8 v, unsigned long addr)
-{
-	__raw_writeb(v, addr);
-}
-
-static inline void __deprecated ctrl_outw(u16 v, unsigned long addr)
-{
-	__raw_writew(v, addr);
-}
-
-static inline void __deprecated ctrl_outl(u32 v, unsigned long addr)
-{
-	__raw_writel(v, addr);
-}
-
-static inline void __deprecated ctrl_outq(u64 v, unsigned long addr)
-{
-	__raw_writeq(v, addr);
-}
-
-extern unsigned long generic_io_base;
-
-static inline void ctrl_delay(void)
-{
-	__raw_readw(generic_io_base);
-}
+#define readb_relaxed(c)	({ u8  __v = __raw_readb(c); __v; })
+#define readw_relaxed(c)	({ u16 __v = le16_to_cpu((__force __le16) \
+					__raw_readw(c)); __v; })
+#define readl_relaxed(c)	({ u32 __v = le32_to_cpu((__force __le32) \
+					__raw_readl(c)); __v; })
+#define readq_relaxed(c)	({ u64 __v = le64_to_cpu((__force __le64) \
+					__raw_readq(c)); __v; })
+
+#define writeb_relaxed(v,c)	((void)__raw_writeb(v,c))
+#define writew_relaxed(v,c)	((void)__raw_writew((__force u16) \
+					cpu_to_le16(v),c))
+#define writel_relaxed(v,c)	((void)__raw_writel((__force u32) \
+					cpu_to_le32(v),c))
+#define writeq_relaxed(v,c)	((void)__raw_writeq((__force u64) \
+					cpu_to_le64(v),c))
+
+#define readb(a)		({ u8  r_ = readb_relaxed(a); rmb(); r_; })
+#define readw(a)		({ u16 r_ = readw_relaxed(a); rmb(); r_; })
+#define readl(a)		({ u32 r_ = readl_relaxed(a); rmb(); r_; })
+#define readq(a)		({ u64 r_ = readq_relaxed(a); rmb(); r_; })
+
+#define writeb(v,a)		({ wmb(); writeb_relaxed((v),(a)); })
+#define writew(v,a)		({ wmb(); writew_relaxed((v),(a)); })
+#define writel(v,a)		({ wmb(); writel_relaxed((v),(a)); })
+#define writeq(v,a)		({ wmb(); writeq_relaxed((v),(a)); })
+
+#define readsb(p,d,l)		__raw_readsb(p,d,l)
+#define readsw(p,d,l)		__raw_readsw(p,d,l)
+#define readsl(p,d,l)		__raw_readsl(p,d,l)
+
+#define writesb(p,d,l)		__raw_writesb(p,d,l)
+#define writesw(p,d,l)		__raw_writesw(p,d,l)
+#define writesl(p,d,l)		__raw_writesl(p,d,l)
 
 #define __BUILD_UNCACHED_IO(bwlq, type)					\
 static inline type read##bwlq##_uncached(unsigned long addr)		\
@@ -159,10 +96,11 @@ __BUILD_UNCACHED_IO(w, u16)
 __BUILD_UNCACHED_IO(l, u32)
 __BUILD_UNCACHED_IO(q, u64)
 
-#define __BUILD_MEMORY_STRING(bwlq, type)				\
+#define __BUILD_MEMORY_STRING(pfx, bwlq, type)				\
 									\
-static inline void __raw_writes##bwlq(volatile void __iomem *mem,	\
-				const void *addr, unsigned int count)	\
+static inline void							\
+pfx##writes##bwlq(volatile void __iomem *mem, const void *addr,		\
+		  unsigned int count)					\
 {									\
 	const volatile type *__addr = addr;				\
 									\
@@ -172,8 +110,8 @@ static inline void __raw_writes##bwlq(volatile void __iomem *mem,	\
 	}								\
 }									\
 									\
-static inline void __raw_reads##bwlq(volatile void __iomem *mem,	\
-			       void *addr, unsigned int count)		\
+static inline void pfx##reads##bwlq(volatile void __iomem *mem,		\
+				    void *addr, unsigned int count)	\
 {									\
 	volatile type *__addr = addr;					\
 									\
@@ -183,85 +121,166 @@ static inline void __raw_reads##bwlq(volatile void __iomem *mem,	\
 	}								\
 }
 
-__BUILD_MEMORY_STRING(b, u8)
-__BUILD_MEMORY_STRING(w, u16)
+__BUILD_MEMORY_STRING(__raw_, b, u8)
+__BUILD_MEMORY_STRING(__raw_, w, u16)
 
 #ifdef CONFIG_SUPERH32
 void __raw_writesl(void __iomem *addr, const void *data, int longlen);
 void __raw_readsl(const void __iomem *addr, void *data, int longlen);
 #else
-__BUILD_MEMORY_STRING(l, u32)
+__BUILD_MEMORY_STRING(__raw_, l, u32)
 #endif
 
-__BUILD_MEMORY_STRING(q, u64)
-
-#define writesb			__raw_writesb
-#define writesw			__raw_writesw
-#define writesl			__raw_writesl
-
-#define readsb			__raw_readsb
-#define readsw			__raw_readsw
-#define readsl			__raw_readsl
-
-#define readb_relaxed(a)	readb(a)
-#define readw_relaxed(a)	readw(a)
-#define readl_relaxed(a)	readl(a)
-#define readq_relaxed(a)	readq(a)
-
-#ifndef CONFIG_GENERIC_IOMAP
-/* Simple MMIO */
-#define ioread8(a)		__raw_readb(a)
-#define ioread16(a)		__raw_readw(a)
-#define ioread16be(a)		be16_to_cpu(__raw_readw((a)))
-#define ioread32(a)		__raw_readl(a)
-#define ioread32be(a)		be32_to_cpu(__raw_readl((a)))
-
-#define iowrite8(v,a)		__raw_writeb((v),(a))
-#define iowrite16(v,a)		__raw_writew((v),(a))
-#define iowrite16be(v,a)	__raw_writew(cpu_to_be16((v)),(a))
-#define iowrite32(v,a)		__raw_writel((v),(a))
-#define iowrite32be(v,a)	__raw_writel(cpu_to_be32((v)),(a))
-
-#define ioread8_rep(a, d, c)	__raw_readsb((a), (d), (c))
-#define ioread16_rep(a, d, c)	__raw_readsw((a), (d), (c))
-#define ioread32_rep(a, d, c)	__raw_readsl((a), (d), (c))
-
-#define iowrite8_rep(a, s, c)	__raw_writesb((a), (s), (c))
-#define iowrite16_rep(a, s, c)	__raw_writesw((a), (s), (c))
-#define iowrite32_rep(a, s, c)	__raw_writesl((a), (s), (c))
+__BUILD_MEMORY_STRING(__raw_, q, u64)
+
+#ifdef CONFIG_HAS_IOPORT
+
+/*
+ * Slowdown I/O port space accesses for antique hardware.
+ */
+#undef CONF_SLOWDOWN_IO
+
+/*
+ * On SuperH I/O ports are memory mapped, so we access them using normal
+ * load/store instructions. sh_io_port_base is the virtual address to
+ * which all ports are being mapped.
+ */
+extern const unsigned long sh_io_port_base;
+
+static inline void __set_io_port_base(unsigned long pbase)
+{
+	*(unsigned long *)&sh_io_port_base = pbase;
+	barrier();
+}
+
+#ifdef CONFIG_GENERIC_IOMAP
+#define __ioport_map ioport_map
+#else
+extern void __iomem *__ioport_map(unsigned long addr, unsigned int size);
 #endif
 
-#define mmio_insb(p,d,c)	__raw_readsb(p,d,c)
-#define mmio_insw(p,d,c)	__raw_readsw(p,d,c)
-#define mmio_insl(p,d,c)	__raw_readsl(p,d,c)
+#ifdef CONF_SLOWDOWN_IO
+#define SLOW_DOWN_IO __raw_readw(sh_io_port_base)
+#else
+#define SLOW_DOWN_IO
+#endif
 
-#define mmio_outsb(p,s,c)	__raw_writesb(p,s,c)
-#define mmio_outsw(p,s,c)	__raw_writesw(p,s,c)
-#define mmio_outsl(p,s,c)	__raw_writesl(p,s,c)
+#define __BUILD_IOPORT_SINGLE(pfx, bwlq, type, p, slow)			\
+									\
+static inline void pfx##out##bwlq##p(type val, unsigned long port)	\
+{									\
+	volatile type *__addr;						\
+									\
+	__addr = __ioport_map(port, sizeof(type));			\
+	*__addr = val;							\
+	slow;								\
+}									\
+									\
+static inline type pfx##in##bwlq##p(unsigned long port)			\
+{									\
+	volatile type *__addr;						\
+	type __val;							\
+									\
+	__addr = __ioport_map(port, sizeof(type));			\
+	__val = *__addr;						\
+	slow;								\
+									\
+	return __val;							\
+}
 
-/* synco on SH-4A, otherwise a nop */
-#define mmiowb()		wmb()
+#define __BUILD_IOPORT_PFX(bus, bwlq, type)				\
+	__BUILD_IOPORT_SINGLE(bus, bwlq, type, ,)			\
+	__BUILD_IOPORT_SINGLE(bus, bwlq, type, _p, SLOW_DOWN_IO)
 
-#define IO_SPACE_LIMIT 0xffffffff
+#define BUILDIO_IOPORT(bwlq, type)					\
+	__BUILD_IOPORT_PFX(, bwlq, type)
 
-#ifdef CONFIG_HAS_IOPORT
+BUILDIO_IOPORT(b, u8)
+BUILDIO_IOPORT(w, u16)
+BUILDIO_IOPORT(l, u32)
+BUILDIO_IOPORT(q, u64)
+
+#define __BUILD_IOPORT_STRING(bwlq, type)				\
+									\
+static inline void outs##bwlq(unsigned long port, const void *addr,	\
+			      unsigned int count)			\
+{									\
+	const volatile type *__addr = addr;				\
+									\
+	while (count--) {						\
+		out##bwlq(*__addr, port);				\
+		__addr++;						\
+	}								\
+}									\
+									\
+static inline void ins##bwlq(unsigned long port, void *addr,		\
+			     unsigned int count)			\
+{									\
+	volatile type *__addr = addr;					\
+									\
+	while (count--) {						\
+		*__addr = in##bwlq(port);				\
+		__addr++;						\
+	}								\
+}
+
+__BUILD_IOPORT_STRING(b, u8)
+__BUILD_IOPORT_STRING(w, u16)
+__BUILD_IOPORT_STRING(l, u32)
+__BUILD_IOPORT_STRING(q, u64)
+
+#endif
 
 /*
- * This function provides a method for the generic case where a
- * board-specific ioport_map simply needs to return the port + some
- * arbitrary port base.
+ * Legacy SuperH on-chip I/O functions
  *
- * We use this at board setup time to implicitly set the port base, and
- * as a result, we can use the generic ioport_map.
+ * These are all deprecated, all new (and especially cross-platform) code
+ * should be using the __raw_xxx() routines directly.
  */
-static inline void __set_io_port_base(unsigned long pbase)
+static inline u8 __deprecated ctrl_inb(unsigned long addr)
 {
-	generic_io_base = pbase;
+	return __raw_readb(addr);
 }
 
-#define __ioport_map(p, n) sh_mv.mv_ioport_map((p), (n))
+static inline u16 __deprecated ctrl_inw(unsigned long addr)
+{
+	return __raw_readw(addr);
+}
 
-#endif
+static inline u32 __deprecated ctrl_inl(unsigned long addr)
+{
+	return __raw_readl(addr);
+}
+
+static inline u64 __deprecated ctrl_inq(unsigned long addr)
+{
+	return __raw_readq(addr);
+}
+
+static inline void __deprecated ctrl_outb(u8 v, unsigned long addr)
+{
+	__raw_writeb(v, addr);
+}
+
+static inline void __deprecated ctrl_outw(u16 v, unsigned long addr)
+{
+	__raw_writew(v, addr);
+}
+
+static inline void __deprecated ctrl_outl(u32 v, unsigned long addr)
+{
+	__raw_writel(v, addr);
+}
+
+static inline void __deprecated ctrl_outq(u64 v, unsigned long addr)
+{
+	__raw_writeq(v, addr);
+}
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/* synco on SH-4A, otherwise a nop */
+#define mmiowb()		wmb()
 
 /* We really want to try and get these to memcpy etc */
 void memcpy_fromio(void *, const volatile void __iomem *, unsigned long);
@@ -395,10 +414,6 @@ static inline int iounmap_fixed(void __iomem *addr) { return -EINVAL; }
 #define ioremap_nocache	ioremap
 #define iounmap		__iounmap
 
-#define maybebadio(port) \
-	printk(KERN_ERR "bad PC-like io %s:%u for port 0x%lx at 0x%08x\n", \
-	       __func__, __LINE__, (port), (u32)__builtin_return_address(0))
-
 /*
  * Convert a physical pointer to a virtual kernel pointer for /dev/mem
  * access
diff --git a/arch/sh/include/asm/io_generic.h b/arch/sh/include/asm/io_generic.h
index 491df93cbf8..b5f6956f19c 100644
--- a/arch/sh/include/asm/io_generic.h
+++ b/arch/sh/include/asm/io_generic.h
@@ -11,31 +11,6 @@
 #error "Don't include this header without a valid system prefix"
 #endif
 
-u8 IO_CONCAT(__IO_PREFIX,inb)(unsigned long);
-u16 IO_CONCAT(__IO_PREFIX,inw)(unsigned long);
-u32 IO_CONCAT(__IO_PREFIX,inl)(unsigned long);
-
-void IO_CONCAT(__IO_PREFIX,outb)(u8, unsigned long);
-void IO_CONCAT(__IO_PREFIX,outw)(u16, unsigned long);
-void IO_CONCAT(__IO_PREFIX,outl)(u32, unsigned long);
-
-u8 IO_CONCAT(__IO_PREFIX,inb_p)(unsigned long);
-u16 IO_CONCAT(__IO_PREFIX,inw_p)(unsigned long);
-u32 IO_CONCAT(__IO_PREFIX,inl_p)(unsigned long);
-void IO_CONCAT(__IO_PREFIX,outb_p)(u8, unsigned long);
-void IO_CONCAT(__IO_PREFIX,outw_p)(u16, unsigned long);
-void IO_CONCAT(__IO_PREFIX,outl_p)(u32, unsigned long);
-
-void IO_CONCAT(__IO_PREFIX,insb)(unsigned long, void *dst, unsigned long count);
-void IO_CONCAT(__IO_PREFIX,insw)(unsigned long, void *dst, unsigned long count);
-void IO_CONCAT(__IO_PREFIX,insl)(unsigned long, void *dst, unsigned long count);
-void IO_CONCAT(__IO_PREFIX,outsb)(unsigned long, const void *src, unsigned long count);
-void IO_CONCAT(__IO_PREFIX,outsw)(unsigned long, const void *src, unsigned long count);
-void IO_CONCAT(__IO_PREFIX,outsl)(unsigned long, const void *src, unsigned long count);
-
-void *IO_CONCAT(__IO_PREFIX,ioremap)(unsigned long offset, unsigned long size);
-void IO_CONCAT(__IO_PREFIX,iounmap)(void *addr);
-
 void __iomem *IO_CONCAT(__IO_PREFIX,ioport_map)(unsigned long addr, unsigned int size);
 void IO_CONCAT(__IO_PREFIX,ioport_unmap)(void __iomem *addr);
 void IO_CONCAT(__IO_PREFIX,mem_init)(void);
diff --git a/arch/sh/include/asm/machvec.h b/arch/sh/include/asm/machvec.h
index a0b0cf79cf8..dd5d6e5bf20 100644
--- a/arch/sh/include/asm/machvec.h
+++ b/arch/sh/include/asm/machvec.h
@@ -23,27 +23,6 @@ struct sh_machine_vector {
 	void (*mv_init_irq)(void);
 
 #ifdef CONFIG_HAS_IOPORT
-	u8 (*mv_inb)(unsigned long);
-	u16 (*mv_inw)(unsigned long);
-	u32 (*mv_inl)(unsigned long);
-	void (*mv_outb)(u8, unsigned long);
-	void (*mv_outw)(u16, unsigned long);
-	void (*mv_outl)(u32, unsigned long);
-
-	u8 (*mv_inb_p)(unsigned long);
-	u16 (*mv_inw_p)(unsigned long);
-	u32 (*mv_inl_p)(unsigned long);
-	void (*mv_outb_p)(u8, unsigned long);
-	void (*mv_outw_p)(u16, unsigned long);
-	void (*mv_outl_p)(u32, unsigned long);
-
-	void (*mv_insb)(unsigned long, void *dst, unsigned long count);
-	void (*mv_insw)(unsigned long, void *dst, unsigned long count);
-	void (*mv_insl)(unsigned long, void *dst, unsigned long count);
-	void (*mv_outsb)(unsigned long, const void *src, unsigned long count);
-	void (*mv_outsw)(unsigned long, const void *src, unsigned long count);
-	void (*mv_outsl)(unsigned long, const void *src, unsigned long count);
-
 	void __iomem *(*mv_ioport_map)(unsigned long port, unsigned int size);
 	void (*mv_ioport_unmap)(void __iomem *);
 #endif
diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile
index 8eed6a48544..ff80227b02d 100644
--- a/arch/sh/kernel/Makefile
+++ b/arch/sh/kernel/Makefile
@@ -20,6 +20,11 @@ obj-y	:= clkdev.o debugtraps.o dma-nommu.o dumpstack.o 		\
 	   syscalls_$(BITS).o time.o topology.o traps.o			\
 	   traps_$(BITS).o unwinder.o
 
+ifndef CONFIG_GENERIC_IOMAP
+obj-y				+= iomap.o
+obj-$(CONFIG_HAS_IOPORT)	+= ioport.o
+endif
+
 obj-y				+= cpu/
 obj-$(CONFIG_VSYSCALL)		+= vsyscall/
 obj-$(CONFIG_SMP)		+= smp.o
@@ -39,7 +44,6 @@ obj-$(CONFIG_DUMP_CODE)		+= disassemble.o
 obj-$(CONFIG_HIBERNATION)	+= swsusp.o
 obj-$(CONFIG_DWARF_UNWINDER)	+= dwarf.o
 obj-$(CONFIG_PERF_EVENTS)	+= perf_event.o perf_callchain.o
-obj-$(CONFIG_HAS_IOPORT)	+= io_generic.o
 
 obj-$(CONFIG_HAVE_HW_BREAKPOINT)		+= hw_breakpoint.o
 obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)	+= localtimer.o
diff --git a/arch/sh/kernel/io_generic.c b/arch/sh/kernel/io_generic.c
deleted file mode 100644
index 447d78f666f..00000000000
--- a/arch/sh/kernel/io_generic.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * arch/sh/kernel/io_generic.c
- *
- * Copyright (C) 2000  Niibe Yutaka
- * Copyright (C) 2005 - 2007 Paul Mundt
- *
- * Generic I/O routine. These can be used where a machine specific version
- * is not required.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/module.h>
-#include <linux/io.h>
-#include <asm/machvec.h>
-
-#ifdef CONFIG_CPU_SH3
-/* SH3 has a PCMCIA bug that needs a dummy read from area 6 for a
- * workaround. */
-/* I'm not sure SH7709 has this kind of bug */
-#define dummy_read()	__raw_readb(0xba000000)
-#else
-#define dummy_read()
-#endif
-
-unsigned long generic_io_base = 0;
-
-u8 generic_inb(unsigned long port)
-{
-	return __raw_readb(__ioport_map(port, 1));
-}
-
-u16 generic_inw(unsigned long port)
-{
-	return __raw_readw(__ioport_map(port, 2));
-}
-
-u32 generic_inl(unsigned long port)
-{
-	return __raw_readl(__ioport_map(port, 4));
-}
-
-u8 generic_inb_p(unsigned long port)
-{
-	unsigned long v = generic_inb(port);
-
-	ctrl_delay();
-	return v;
-}
-
-u16 generic_inw_p(unsigned long port)
-{
-	unsigned long v = generic_inw(port);
-
-	ctrl_delay();
-	return v;
-}
-
-u32 generic_inl_p(unsigned long port)
-{
-	unsigned long v = generic_inl(port);
-
-	ctrl_delay();
-	return v;
-}
-
-/*
- * insb/w/l all read a series of bytes/words/longs from a fixed port
- * address. However as the port address doesn't change we only need to
- * convert the port address to real address once.
- */
-
-void generic_insb(unsigned long port, void *dst, unsigned long count)
-{
-	__raw_readsb(__ioport_map(port, 1), dst, count);
-	dummy_read();
-}
-
-void generic_insw(unsigned long port, void *dst, unsigned long count)
-{
-	__raw_readsw(__ioport_map(port, 2), dst, count);
-	dummy_read();
-}
-
-void generic_insl(unsigned long port, void *dst, unsigned long count)
-{
-	__raw_readsl(__ioport_map(port, 4), dst, count);
-	dummy_read();
-}
-
-void generic_outb(u8 b, unsigned long port)
-{
-	__raw_writeb(b, __ioport_map(port, 1));
-}
-
-void generic_outw(u16 b, unsigned long port)
-{
-	__raw_writew(b, __ioport_map(port, 2));
-}
-
-void generic_outl(u32 b, unsigned long port)
-{
-	__raw_writel(b, __ioport_map(port, 4));
-}
-
-void generic_outb_p(u8 b, unsigned long port)
-{
-	generic_outb(b, port);
-	ctrl_delay();
-}
-
-void generic_outw_p(u16 b, unsigned long port)
-{
-	generic_outw(b, port);
-	ctrl_delay();
-}
-
-void generic_outl_p(u32 b, unsigned long port)
-{
-	generic_outl(b, port);
-	ctrl_delay();
-}
-
-/*
- * outsb/w/l all write a series of bytes/words/longs to a fixed port
- * address. However as the port address doesn't change we only need to
- * convert the port address to real address once.
- */
-void generic_outsb(unsigned long port, const void *src, unsigned long count)
-{
-	__raw_writesb(__ioport_map(port, 1), src, count);
-	dummy_read();
-}
-
-void generic_outsw(unsigned long port, const void *src, unsigned long count)
-{
-	__raw_writesw(__ioport_map(port, 2), src, count);
-	dummy_read();
-}
-
-void generic_outsl(unsigned long port, const void *src, unsigned long count)
-{
-	__raw_writesl(__ioport_map(port, 4), src, count);
-	dummy_read();
-}
-
-void __iomem *generic_ioport_map(unsigned long addr, unsigned int size)
-{
-#ifdef P1SEG
-	if (PXSEG(addr) >= P1SEG)
-		return (void __iomem *)addr;
-#endif
-
-	return (void __iomem *)(addr + generic_io_base);
-}
-
-void generic_ioport_unmap(void __iomem *addr)
-{
-}
-
-#ifndef CONFIG_GENERIC_IOMAP
-void __iomem *ioport_map(unsigned long port, unsigned int nr)
-{
-	void __iomem *ret;
-
-	ret = __ioport_map_trapped(port, nr);
-	if (ret)
-		return ret;
-
-	return __ioport_map(port, nr);
-}
-EXPORT_SYMBOL(ioport_map);
-
-void ioport_unmap(void __iomem *addr)
-{
-	sh_mv.mv_ioport_unmap(addr);
-}
-EXPORT_SYMBOL(ioport_unmap);
-#endif /* CONFIG_GENERIC_IOMAP */
diff --git a/arch/sh/kernel/iomap.c b/arch/sh/kernel/iomap.c
new file mode 100644
index 00000000000..2e8e8b9b9ce
--- /dev/null
+++ b/arch/sh/kernel/iomap.c
@@ -0,0 +1,165 @@
+/*
+ * arch/sh/kernel/iomap.c
+ *
+ * Copyright (C) 2000  Niibe Yutaka
+ * Copyright (C) 2005 - 2007 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/module.h>
+#include <linux/io.h>
+
+unsigned int ioread8(void __iomem *addr)
+{
+	return readb(addr);
+}
+EXPORT_SYMBOL(ioread8);
+
+unsigned int ioread16(void __iomem *addr)
+{
+	return readw(addr);
+}
+EXPORT_SYMBOL(ioread16);
+
+unsigned int ioread16be(void __iomem *addr)
+{
+	return be16_to_cpu(__raw_readw(addr));
+}
+EXPORT_SYMBOL(ioread16be);
+
+unsigned int ioread32(void __iomem *addr)
+{
+	return readl(addr);
+}
+EXPORT_SYMBOL(ioread32);
+
+unsigned int ioread32be(void __iomem *addr)
+{
+	return be32_to_cpu(__raw_readl(addr));
+}
+EXPORT_SYMBOL(ioread32be);
+
+void iowrite8(u8 val, void __iomem *addr)
+{
+	writeb(val, addr);
+}
+EXPORT_SYMBOL(iowrite8);
+
+void iowrite16(u16 val, void __iomem *addr)
+{
+	writew(val, addr);
+}
+EXPORT_SYMBOL(iowrite16);
+
+void iowrite16be(u16 val, void __iomem *addr)
+{
+	__raw_writew(cpu_to_be16(val), addr);
+}
+EXPORT_SYMBOL(iowrite16be);
+
+void iowrite32(u32 val, void __iomem *addr)
+{
+	writel(val, addr);
+}
+EXPORT_SYMBOL(iowrite32);
+
+void iowrite32be(u32 val, void __iomem *addr)
+{
+	__raw_writel(cpu_to_be32(val), addr);
+}
+EXPORT_SYMBOL(iowrite32be);
+
+/*
+ * These are the "repeat MMIO read/write" functions.
+ * Note the "__raw" accesses, since we don't want to
+ * convert to CPU byte order. We write in "IO byte
+ * order" (we also don't have IO barriers).
+ */
+static inline void mmio_insb(void __iomem *addr, u8 *dst, int count)
+{
+	while (--count >= 0) {
+		u8 data = __raw_readb(addr);
+		*dst = data;
+		dst++;
+	}
+}
+
+static inline void mmio_insw(void __iomem *addr, u16 *dst, int count)
+{
+	while (--count >= 0) {
+		u16 data = __raw_readw(addr);
+		*dst = data;
+		dst++;
+	}
+}
+
+static inline void mmio_insl(void __iomem *addr, u32 *dst, int count)
+{
+	while (--count >= 0) {
+		u32 data = __raw_readl(addr);
+		*dst = data;
+		dst++;
+	}
+}
+
+static inline void mmio_outsb(void __iomem *addr, const u8 *src, int count)
+{
+	while (--count >= 0) {
+		__raw_writeb(*src, addr);
+		src++;
+	}
+}
+
+static inline void mmio_outsw(void __iomem *addr, const u16 *src, int count)
+{
+	while (--count >= 0) {
+		__raw_writew(*src, addr);
+		src++;
+	}
+}
+
+static inline void mmio_outsl(void __iomem *addr, const u32 *src, int count)
+{
+	while (--count >= 0) {
+		__raw_writel(*src, addr);
+		src++;
+	}
+}
+
+void ioread8_rep(void __iomem *addr, void *dst, unsigned long count)
+{
+	mmio_insb(addr, dst, count);
+}
+EXPORT_SYMBOL(ioread8_rep);
+
+void ioread16_rep(void __iomem *addr, void *dst, unsigned long count)
+{
+	mmio_insw(addr, dst, count);
+}
+EXPORT_SYMBOL(ioread16_rep);
+
+void ioread32_rep(void __iomem *addr, void *dst, unsigned long count)
+{
+	mmio_insl(addr, dst, count);
+}
+EXPORT_SYMBOL(ioread32_rep);
+
+void iowrite8_rep(void __iomem *addr, const void *src, unsigned long count)
+{
+	mmio_outsb(addr, src, count);
+}
+EXPORT_SYMBOL(iowrite8_rep);
+
+void iowrite16_rep(void __iomem *addr, const void *src, unsigned long count)
+{
+	mmio_outsw(addr, src, count);
+}
+EXPORT_SYMBOL(iowrite16_rep);
+
+void iowrite32_rep(void __iomem *addr, const void *src, unsigned long count)
+{
+	mmio_outsl(addr, src, count);
+}
+EXPORT_SYMBOL(iowrite32_rep);
diff --git a/arch/sh/kernel/ioport.c b/arch/sh/kernel/ioport.c
new file mode 100644
index 00000000000..e3ad6103e7c
--- /dev/null
+++ b/arch/sh/kernel/ioport.c
@@ -0,0 +1,43 @@
+/*
+ * arch/sh/kernel/ioport.c
+ *
+ * Copyright (C) 2000  Niibe Yutaka
+ * Copyright (C) 2005 - 2007 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/module.h>
+#include <linux/io.h>
+
+const unsigned long sh_io_port_base __read_mostly = -1;
+EXPORT_SYMBOL(sh_io_port_base);
+
+void __iomem *__ioport_map(unsigned long addr, unsigned int size)
+{
+	if (sh_mv.mv_ioport_map)
+		return sh_mv.mv_ioport_map(addr, size);
+
+	return (void __iomem *)(addr + sh_io_port_base);
+}
+EXPORT_SYMBOL(__ioport_map);
+
+void __iomem *ioport_map(unsigned long port, unsigned int nr)
+{
+	void __iomem *ret;
+
+	ret = __ioport_map_trapped(port, nr);
+	if (ret)
+		return ret;
+
+	return __ioport_map(port, nr);
+}
+EXPORT_SYMBOL(ioport_map);
+
+void ioport_unmap(void __iomem *addr)
+{
+	if (sh_mv.mv_ioport_unmap)
+		sh_mv.mv_ioport_unmap(addr);
+}
+EXPORT_SYMBOL(ioport_unmap);
diff --git a/arch/sh/kernel/machvec.c b/arch/sh/kernel/machvec.c
index 9f9bb63616a..3d722e49db0 100644
--- a/arch/sh/kernel/machvec.c
+++ b/arch/sh/kernel/machvec.c
@@ -118,28 +118,6 @@ void __init sh_mv_setup(void)
 		sh_mv.mv_##elem = generic_##elem; \
 } while (0)
 
-#ifdef CONFIG_HAS_IOPORT
-
-#ifdef P2SEG
-	__set_io_port_base(P2SEG);
-#else
-	__set_io_port_base(0);
-#endif
-
-	mv_set(inb);	mv_set(inw);	mv_set(inl);
-	mv_set(outb);	mv_set(outw);	mv_set(outl);
-
-	mv_set(inb_p);	mv_set(inw_p);	mv_set(inl_p);
-	mv_set(outb_p);	mv_set(outw_p);	mv_set(outl_p);
-
-	mv_set(insb);	mv_set(insw);	mv_set(insl);
-	mv_set(outsb);	mv_set(outsw);	mv_set(outsl);
-
-	mv_set(ioport_map);
-	mv_set(ioport_unmap);
-
-#endif
-
 	mv_set(irq_demux);
 	mv_set(mode_pins);
 	mv_set(mem_init);
-- 
cgit v1.2.3-18-g5258


From 16b259203c513ed28bd31cc9a981e0d3ad517943 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 1 Nov 2010 12:18:48 -0400
Subject: sh: migrate SH_CLK_MD to mode pin API.

This kills off the hardcoded SH_CLK_MD introduced by the SH-2 boards and
converts over to the mode pin API.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig                        |  9 ---------
 arch/sh/boards/mach-se/7206/setup.c    |  6 ++++++
 arch/sh/boards/mach-se/board-se7619.c  |  6 ++++++
 arch/sh/kernel/cpu/sh2/clock-sh7619.c  | 22 ++++++++++++----------
 arch/sh/kernel/cpu/sh2a/clock-sh7201.c | 20 ++++++++++----------
 arch/sh/kernel/cpu/sh2a/clock-sh7203.c | 21 +++++++++------------
 arch/sh/kernel/cpu/sh2a/clock-sh7206.c | 20 +++++++++-----------
 7 files changed, 52 insertions(+), 52 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 7f217b3a50a..2fe8812f78d 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -567,15 +567,6 @@ config SH_CLK_CPG_LEGACY
 	def_bool y if !CPU_SUBTYPE_SH7785 && !ARCH_SHMOBILE && \
 		      !CPU_SHX3 && !CPU_SUBTYPE_SH7757
 
-config SH_CLK_MD
-	int "CPU Mode Pin Setting"
-	depends on CPU_SH2
-	default 6 if CPU_SUBTYPE_SH7206
-	default 5 if CPU_SUBTYPE_SH7619
-	default 0
-	help
-	  MD2 - MD0 pin setting.
-
 source "kernel/time/Kconfig"
 
 endmenu
diff --git a/arch/sh/boards/mach-se/7206/setup.c b/arch/sh/boards/mach-se/7206/setup.c
index 7f4871c71a0..33039e0dc56 100644
--- a/arch/sh/boards/mach-se/7206/setup.c
+++ b/arch/sh/boards/mach-se/7206/setup.c
@@ -79,6 +79,11 @@ static int __init se7206_devices_setup(void)
 }
 __initcall(se7206_devices_setup);
 
+static int se7206_mode_pins(void)
+{
+	return MODE_PIN1 | MODE_PIN2;
+}
+
 /*
  * The Machine Vector
  */
@@ -87,4 +92,5 @@ static struct sh_machine_vector mv_se __initmv = {
 	.mv_name		= "SolutionEngine",
 	.mv_nr_irqs		= 256,
 	.mv_init_irq		= init_se7206_IRQ,
+	.mv_mode_pins		= se7206_mode_pins,
 };
diff --git a/arch/sh/boards/mach-se/board-se7619.c b/arch/sh/boards/mach-se/board-se7619.c
index 1d0ef7faa10..82b6d4a5dc0 100644
--- a/arch/sh/boards/mach-se/board-se7619.c
+++ b/arch/sh/boards/mach-se/board-se7619.c
@@ -11,6 +11,11 @@
 #include <asm/io.h>
 #include <asm/machvec.h>
 
+static int se7619_mode_pins(void)
+{
+	return MODE_PIN2 | MODE_PIN0;
+}
+
 /*
  * The Machine Vector
  */
@@ -18,4 +23,5 @@
 static struct sh_machine_vector mv_se __initmv = {
 	.mv_name		= "SolutionEngine",
 	.mv_nr_irqs		= 108,
+	.mv_mode_pins		= se7619_mode_pins,
 };
diff --git a/arch/sh/kernel/cpu/sh2/clock-sh7619.c b/arch/sh/kernel/cpu/sh2/clock-sh7619.c
index 0c9f24d7a02..5b7f12e58a8 100644
--- a/arch/sh/kernel/cpu/sh2/clock-sh7619.c
+++ b/arch/sh/kernel/cpu/sh2/clock-sh7619.c
@@ -14,24 +14,18 @@
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/io.h>
 #include <asm/clock.h>
 #include <asm/freq.h>
-#include <asm/io.h>
+#include <asm/processor.h>
 
 static const int pll1rate[] = {1,2};
 static const int pfc_divisors[] = {1,2,0,4};
-
-#if (CONFIG_SH_CLK_MD == 1) || (CONFIG_SH_CLK_MD == 2)
-#define PLL2 (4)
-#elif (CONFIG_SH_CLK_MD == 5) || (CONFIG_SH_CLK_MD == 6)
-#define PLL2 (2)
-#else
-#error "Illigal Clock Mode!"
-#endif
+static unsigned int pll2_mult;
 
 static void master_clk_init(struct clk *clk)
 {
-	clk->rate *= PLL2 * pll1rate[(__raw_readw(FREQCR) >> 8) & 7];
+	clk->rate *= pll2_mult * pll1rate[(__raw_readw(FREQCR) >> 8) & 7];
 }
 
 static struct clk_ops sh7619_master_clk_ops = {
@@ -70,6 +64,14 @@ static struct clk_ops *sh7619_clk_ops[] = {
 
 void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
 {
+	if (test_mode_pin(MODE_PIN2 | MODE_PIN0) ||
+	    test_mode_pin(MODE_PIN2 | MODE_PIN1))
+		pll2_mult = 2;
+	else if (test_mode_pin(MODE_PIN0) || test_mode_pin(MODE_PIN1))
+		pll2_mult = 4;
+
+	BUG_ON(!pll2_mult);
+
 	if (idx < ARRAY_SIZE(sh7619_clk_ops))
 		*ops = sh7619_clk_ops[idx];
 }
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7201.c b/arch/sh/kernel/cpu/sh2a/clock-sh7201.c
index b26264dc2ae..1174e2d96c0 100644
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7201.c
+++ b/arch/sh/kernel/cpu/sh2a/clock-sh7201.c
@@ -22,19 +22,12 @@ static const int pll1rate[]={1,2,3,4,6,8};
 static const int pfc_divisors[]={1,2,3,4,6,8,12};
 #define ifc_divisors pfc_divisors
 
-#if (CONFIG_SH_CLK_MD == 0)
-#define PLL2 (4)
-#elif (CONFIG_SH_CLK_MD == 2)
-#define PLL2 (2)
-#elif (CONFIG_SH_CLK_MD == 3)
-#define PLL2 (1)
-#else
-#error "Illegal Clock Mode!"
-#endif
+static unsigned int pll2_mult;
 
 static void master_clk_init(struct clk *clk)
 {
-	return 10000000 * PLL2 * pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
+	clk->rate = 10000000 * pll2_mult *
+	       pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
 }
 
 static struct clk_ops sh7201_master_clk_ops = {
@@ -80,6 +73,13 @@ static struct clk_ops *sh7201_clk_ops[] = {
 
 void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
 {
+	if (test_mode_pin(MODE_PIN1 | MODE_PIN0))
+		pll2_mult = 1;
+	else if (test_mode_pin(MODE_PIN1))
+		pll2_mult = 2;
+	else
+		pll2_mult = 4;
+
 	if (idx < ARRAY_SIZE(sh7201_clk_ops))
 		*ops = sh7201_clk_ops[idx];
 }
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7203.c b/arch/sh/kernel/cpu/sh2a/clock-sh7203.c
index 7e75d8f7950..95a008e8b73 100644
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7203.c
+++ b/arch/sh/kernel/cpu/sh2a/clock-sh7203.c
@@ -25,21 +25,11 @@ static const int pll1rate[]={8,12,16,0};
 static const int pfc_divisors[]={1,2,3,4,6,8,12};
 #define ifc_divisors pfc_divisors
 
-#if (CONFIG_SH_CLK_MD == 0)
-#define PLL2 (1)
-#elif (CONFIG_SH_CLK_MD == 1)
-#define PLL2 (2)
-#elif (CONFIG_SH_CLK_MD == 2)
-#define PLL2 (4)
-#elif (CONFIG_SH_CLK_MD == 3)
-#define PLL2 (4)
-#else
-#error "Illegal Clock Mode!"
-#endif
+static unsigned int pll2_mult;
 
 static void master_clk_init(struct clk *clk)
 {
-	clk->rate *= pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0003] * PLL2 ;
+	clk->rate *= pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0003] * pll2_mult;
 }
 
 static struct clk_ops sh7203_master_clk_ops = {
@@ -79,6 +69,13 @@ static struct clk_ops *sh7203_clk_ops[] = {
 
 void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
 {
+	if (test_mode_pin(MODE_PIN1))
+		pll2_mult = 4;
+	else if (test_mode_pin(MODE_PIN0))
+		pll2_mult = 2;
+	else
+		pll2_mult = 1;
+
 	if (idx < ARRAY_SIZE(sh7203_clk_ops))
 		*ops = sh7203_clk_ops[idx];
 }
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7206.c b/arch/sh/kernel/cpu/sh2a/clock-sh7206.c
index b27a5e2687a..3c314d7cd6e 100644
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7206.c
+++ b/arch/sh/kernel/cpu/sh2a/clock-sh7206.c
@@ -22,19 +22,11 @@ static const int pll1rate[]={1,2,3,4,6,8};
 static const int pfc_divisors[]={1,2,3,4,6,8,12};
 #define ifc_divisors pfc_divisors
 
-#if (CONFIG_SH_CLK_MD == 2)
-#define PLL2 (4)
-#elif (CONFIG_SH_CLK_MD == 6)
-#define PLL2 (2)
-#elif (CONFIG_SH_CLK_MD == 7)
-#define PLL2 (1)
-#else
-#error "Illigal Clock Mode!"
-#endif
+static unsigned int pll2_mult;
 
 static void master_clk_init(struct clk *clk)
 {
-	clk->rate *= PLL2 * pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
+	clk->rate *= pll2_mult * pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
 }
 
 static struct clk_ops sh7206_master_clk_ops = {
@@ -79,7 +71,13 @@ static struct clk_ops *sh7206_clk_ops[] = {
 
 void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
 {
+	if (test_mode_pin(MODE_PIN2 | MODE_PIN1 | MODE_PIN0))
+		pll2_mult = 1;
+	else if (test_mode_pin(MODE_PIN2 | MODE_PIN1))
+		pll2_mult = 2;
+	else if (test_mode_pin(MODE_PIN1))
+		pll2_mult = 4;
+
 	if (idx < ARRAY_SIZE(sh7206_clk_ops))
 		*ops = sh7206_clk_ops[idx];
 }
-
-- 
cgit v1.2.3-18-g5258


From f020c92de48246510623162fb22d60d91810cc56 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 1 Nov 2010 12:24:48 -0400
Subject: sh: Enable optional gpiolib for all CPUs with pinmux tables.

All of the CPUs with pinmux tables support gpiolib. At present the boards
that depend on it for initialization manually select gpiolib as needed,
but there is no reason why it can't be exposed generically to the user
regardless.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'arch/sh')

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 2fe8812f78d..3b572fe1c04 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -274,6 +274,7 @@ config CPU_SUBTYPE_SH7203
 	select CPU_HAS_FPU
 	select SYS_SUPPORTS_CMT
 	select SYS_SUPPORTS_MTU2
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 
 config CPU_SUBTYPE_SH7206
 	bool "Support SH7206 processor"
@@ -345,6 +346,7 @@ config CPU_SUBTYPE_SH7720
 	select CPU_SH3
 	select CPU_HAS_DSP
 	select SYS_SUPPORTS_CMT
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	help
 	  Select SH7720 if you have a SH3-DSP SH7720 CPU.
 
@@ -407,6 +409,7 @@ config CPU_SUBTYPE_SH7723
 	select ARCH_SHMOBILE
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_CMT
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	help
 	  Select SH7723 if you have an SH-MobileR2 CPU.
 
@@ -417,6 +420,7 @@ config CPU_SUBTYPE_SH7724
 	select ARCH_SHMOBILE
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_CMT
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	help
 	  Select SH7724 if you have an SH-MobileR2R CPU.
 
@@ -424,6 +428,7 @@ config CPU_SUBTYPE_SH7757
 	bool "Support SH7757 processor"
 	select CPU_SH4A
 	select CPU_SHX2
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	help
 	  Select SH7757 if you have a SH4A SH7757 CPU.
 
@@ -447,6 +452,7 @@ config CPU_SUBTYPE_SH7785
 	select CPU_SHX2
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_NUMA
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 
 config CPU_SUBTYPE_SH7786
 	bool "Support SH7786 processor"
@@ -454,6 +460,7 @@ config CPU_SUBTYPE_SH7786
 	select CPU_SHX3
 	select CPU_HAS_PTEAEX
 	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 
 config CPU_SUBTYPE_SHX3
 	bool "Support SH-X3 processor"
@@ -478,6 +485,7 @@ config CPU_SUBTYPE_SH7722
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_NUMA
 	select SYS_SUPPORTS_CMT
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 
 config CPU_SUBTYPE_SH7366
 	bool "Support SH7366 processor"
-- 
cgit v1.2.3-18-g5258


From a9b27bcc6acf2491609f51aa592ec67311d4518d Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 1 Nov 2010 12:44:25 -0400
Subject: sh: Break out cpuinfo_op procfs bits.

Presently this is all inlined in setup.c, which is not really the place
for it. Follow the x86 example and split it out into its own file.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/Makefile |   2 +-
 arch/sh/kernel/cpu/proc.c   | 148 ++++++++++++++++++++++++++++++++++++++++++++
 arch/sh/kernel/setup.c      | 144 ------------------------------------------
 3 files changed, 149 insertions(+), 145 deletions(-)
 create mode 100644 arch/sh/kernel/cpu/proc.c

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/cpu/Makefile b/arch/sh/kernel/cpu/Makefile
index 4edcb60a135..d49c2135fd4 100644
--- a/arch/sh/kernel/cpu/Makefile
+++ b/arch/sh/kernel/cpu/Makefile
@@ -20,4 +20,4 @@ obj-$(CONFIG_SH_CLK_CPG_LEGACY)	+= clock-cpg.o
 obj-$(CONFIG_SH_FPU)		+= fpu.o
 obj-$(CONFIG_SH_FPU_EMU)	+= fpu.o
 
-obj-y	+= irq/ init.o clock.o hwblk.o
+obj-y	+= irq/ init.o clock.o hwblk.o proc.o
diff --git a/arch/sh/kernel/cpu/proc.c b/arch/sh/kernel/cpu/proc.c
new file mode 100644
index 00000000000..e80a936f409
--- /dev/null
+++ b/arch/sh/kernel/cpu/proc.c
@@ -0,0 +1,148 @@
+#include <linux/seq_file.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/machvec.h>
+#include <asm/processor.h>
+
+static const char *cpu_name[] = {
+	[CPU_SH7201]	= "SH7201",
+	[CPU_SH7203]	= "SH7203",	[CPU_SH7263]	= "SH7263",
+	[CPU_SH7206]	= "SH7206",	[CPU_SH7619]	= "SH7619",
+	[CPU_SH7705]	= "SH7705",	[CPU_SH7706]	= "SH7706",
+	[CPU_SH7707]	= "SH7707",	[CPU_SH7708]	= "SH7708",
+	[CPU_SH7709]	= "SH7709",	[CPU_SH7710]	= "SH7710",
+	[CPU_SH7712]	= "SH7712",	[CPU_SH7720]	= "SH7720",
+	[CPU_SH7721]	= "SH7721",	[CPU_SH7729]	= "SH7729",
+	[CPU_SH7750]	= "SH7750",	[CPU_SH7750S]	= "SH7750S",
+	[CPU_SH7750R]	= "SH7750R",	[CPU_SH7751]	= "SH7751",
+	[CPU_SH7751R]	= "SH7751R",	[CPU_SH7760]	= "SH7760",
+	[CPU_SH4_202]	= "SH4-202",	[CPU_SH4_501]	= "SH4-501",
+	[CPU_SH7763]	= "SH7763",	[CPU_SH7770]	= "SH7770",
+	[CPU_SH7780]	= "SH7780",	[CPU_SH7781]	= "SH7781",
+	[CPU_SH7343]	= "SH7343",	[CPU_SH7785]	= "SH7785",
+	[CPU_SH7786]	= "SH7786",	[CPU_SH7757]	= "SH7757",
+	[CPU_SH7722]	= "SH7722",	[CPU_SHX3]	= "SH-X3",
+	[CPU_SH5_101]	= "SH5-101",	[CPU_SH5_103]	= "SH5-103",
+	[CPU_MXG]	= "MX-G",	[CPU_SH7723]	= "SH7723",
+	[CPU_SH7366]	= "SH7366",	[CPU_SH7724]	= "SH7724",
+	[CPU_SH_NONE]	= "Unknown"
+};
+
+const char *get_cpu_subtype(struct sh_cpuinfo *c)
+{
+	return cpu_name[c->type];
+}
+EXPORT_SYMBOL(get_cpu_subtype);
+
+#ifdef CONFIG_PROC_FS
+/* Symbolic CPU flags, keep in sync with asm/cpu-features.h */
+static const char *cpu_flags[] = {
+	"none", "fpu", "p2flush", "mmuassoc", "dsp", "perfctr",
+	"ptea", "llsc", "l2", "op32", "pteaex", NULL
+};
+
+static void show_cpuflags(struct seq_file *m, struct sh_cpuinfo *c)
+{
+	unsigned long i;
+
+	seq_printf(m, "cpu flags\t:");
+
+	if (!c->flags) {
+		seq_printf(m, " %s\n", cpu_flags[0]);
+		return;
+	}
+
+	for (i = 0; cpu_flags[i]; i++)
+		if ((c->flags & (1 << i)))
+			seq_printf(m, " %s", cpu_flags[i+1]);
+
+	seq_printf(m, "\n");
+}
+
+static void show_cacheinfo(struct seq_file *m, const char *type,
+			   struct cache_info info)
+{
+	unsigned int cache_size;
+
+	cache_size = info.ways * info.sets * info.linesz;
+
+	seq_printf(m, "%s size\t: %2dKiB (%d-way)\n",
+		   type, cache_size >> 10, info.ways);
+}
+
+/*
+ *	Get CPU information for use by the procfs.
+ */
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+	struct sh_cpuinfo *c = v;
+	unsigned int cpu = c - cpu_data;
+
+	if (!cpu_online(cpu))
+		return 0;
+
+	if (cpu == 0)
+		seq_printf(m, "machine\t\t: %s\n", get_system_type());
+	else
+		seq_printf(m, "\n");
+
+	seq_printf(m, "processor\t: %d\n", cpu);
+	seq_printf(m, "cpu family\t: %s\n", init_utsname()->machine);
+	seq_printf(m, "cpu type\t: %s\n", get_cpu_subtype(c));
+	if (c->cut_major == -1)
+		seq_printf(m, "cut\t\t: unknown\n");
+	else if (c->cut_minor == -1)
+		seq_printf(m, "cut\t\t: %d.x\n", c->cut_major);
+	else
+		seq_printf(m, "cut\t\t: %d.%d\n", c->cut_major, c->cut_minor);
+
+	show_cpuflags(m, c);
+
+	seq_printf(m, "cache type\t: ");
+
+	/*
+	 * Check for what type of cache we have, we support both the
+	 * unified cache on the SH-2 and SH-3, as well as the harvard
+	 * style cache on the SH-4.
+	 */
+	if (c->icache.flags & SH_CACHE_COMBINED) {
+		seq_printf(m, "unified\n");
+		show_cacheinfo(m, "cache", c->icache);
+	} else {
+		seq_printf(m, "split (harvard)\n");
+		show_cacheinfo(m, "icache", c->icache);
+		show_cacheinfo(m, "dcache", c->dcache);
+	}
+
+	/* Optional secondary cache */
+	if (c->flags & CPU_HAS_L2_CACHE)
+		show_cacheinfo(m, "scache", c->scache);
+
+	seq_printf(m, "address sizes\t: %u bits physical\n", c->phys_bits);
+
+	seq_printf(m, "bogomips\t: %lu.%02lu\n",
+		     c->loops_per_jiffy/(500000/HZ),
+		     (c->loops_per_jiffy/(5000/HZ)) % 100);
+
+	return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+	return *pos < NR_CPUS ? cpu_data + *pos : NULL;
+}
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	++*pos;
+	return c_start(m, pos);
+}
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+const struct seq_operations cpuinfo_op = {
+	.start	= c_start,
+	.next	= c_next,
+	.stop	= c_stop,
+	.show	= show_cpuinfo,
+};
+#endif /* CONFIG_PROC_FS */
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index d6b018c7ebd..4f267160c51 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -12,7 +12,6 @@
 #include <linux/initrd.h>
 #include <linux/bootmem.h>
 #include <linux/console.h>
-#include <linux/seq_file.h>
 #include <linux/root_dev.h>
 #include <linux/utsname.h>
 #include <linux/nodemask.h>
@@ -319,146 +318,3 @@ int test_mode_pin(int pin)
 {
 	return sh_mv.mv_mode_pins() & pin;
 }
-
-static const char *cpu_name[] = {
-	[CPU_SH7201]	= "SH7201",
-	[CPU_SH7203]	= "SH7203",	[CPU_SH7263]	= "SH7263",
-	[CPU_SH7206]	= "SH7206",	[CPU_SH7619]	= "SH7619",
-	[CPU_SH7705]	= "SH7705",	[CPU_SH7706]	= "SH7706",
-	[CPU_SH7707]	= "SH7707",	[CPU_SH7708]	= "SH7708",
-	[CPU_SH7709]	= "SH7709",	[CPU_SH7710]	= "SH7710",
-	[CPU_SH7712]	= "SH7712",	[CPU_SH7720]	= "SH7720",
-	[CPU_SH7721]	= "SH7721",	[CPU_SH7729]	= "SH7729",
-	[CPU_SH7750]	= "SH7750",	[CPU_SH7750S]	= "SH7750S",
-	[CPU_SH7750R]	= "SH7750R",	[CPU_SH7751]	= "SH7751",
-	[CPU_SH7751R]	= "SH7751R",	[CPU_SH7760]	= "SH7760",
-	[CPU_SH4_202]	= "SH4-202",	[CPU_SH4_501]	= "SH4-501",
-	[CPU_SH7763]	= "SH7763",	[CPU_SH7770]	= "SH7770",
-	[CPU_SH7780]	= "SH7780",	[CPU_SH7781]	= "SH7781",
-	[CPU_SH7343]	= "SH7343",	[CPU_SH7785]	= "SH7785",
-	[CPU_SH7786]	= "SH7786",	[CPU_SH7757]	= "SH7757",
-	[CPU_SH7722]	= "SH7722",	[CPU_SHX3]	= "SH-X3",
-	[CPU_SH5_101]	= "SH5-101",	[CPU_SH5_103]	= "SH5-103",
-	[CPU_MXG]	= "MX-G",	[CPU_SH7723]	= "SH7723",
-	[CPU_SH7366]	= "SH7366",	[CPU_SH7724]	= "SH7724",
-	[CPU_SH_NONE]	= "Unknown"
-};
-
-const char *get_cpu_subtype(struct sh_cpuinfo *c)
-{
-	return cpu_name[c->type];
-}
-EXPORT_SYMBOL(get_cpu_subtype);
-
-#ifdef CONFIG_PROC_FS
-/* Symbolic CPU flags, keep in sync with asm/cpu-features.h */
-static const char *cpu_flags[] = {
-	"none", "fpu", "p2flush", "mmuassoc", "dsp", "perfctr",
-	"ptea", "llsc", "l2", "op32", "pteaex", NULL
-};
-
-static void show_cpuflags(struct seq_file *m, struct sh_cpuinfo *c)
-{
-	unsigned long i;
-
-	seq_printf(m, "cpu flags\t:");
-
-	if (!c->flags) {
-		seq_printf(m, " %s\n", cpu_flags[0]);
-		return;
-	}
-
-	for (i = 0; cpu_flags[i]; i++)
-		if ((c->flags & (1 << i)))
-			seq_printf(m, " %s", cpu_flags[i+1]);
-
-	seq_printf(m, "\n");
-}
-
-static void show_cacheinfo(struct seq_file *m, const char *type,
-			   struct cache_info info)
-{
-	unsigned int cache_size;
-
-	cache_size = info.ways * info.sets * info.linesz;
-
-	seq_printf(m, "%s size\t: %2dKiB (%d-way)\n",
-		   type, cache_size >> 10, info.ways);
-}
-
-/*
- *	Get CPU information for use by the procfs.
- */
-static int show_cpuinfo(struct seq_file *m, void *v)
-{
-	struct sh_cpuinfo *c = v;
-	unsigned int cpu = c - cpu_data;
-
-	if (!cpu_online(cpu))
-		return 0;
-
-	if (cpu == 0)
-		seq_printf(m, "machine\t\t: %s\n", get_system_type());
-	else
-		seq_printf(m, "\n");
-
-	seq_printf(m, "processor\t: %d\n", cpu);
-	seq_printf(m, "cpu family\t: %s\n", init_utsname()->machine);
-	seq_printf(m, "cpu type\t: %s\n", get_cpu_subtype(c));
-	if (c->cut_major == -1)
-		seq_printf(m, "cut\t\t: unknown\n");
-	else if (c->cut_minor == -1)
-		seq_printf(m, "cut\t\t: %d.x\n", c->cut_major);
-	else
-		seq_printf(m, "cut\t\t: %d.%d\n", c->cut_major, c->cut_minor);
-
-	show_cpuflags(m, c);
-
-	seq_printf(m, "cache type\t: ");
-
-	/*
-	 * Check for what type of cache we have, we support both the
-	 * unified cache on the SH-2 and SH-3, as well as the harvard
-	 * style cache on the SH-4.
-	 */
-	if (c->icache.flags & SH_CACHE_COMBINED) {
-		seq_printf(m, "unified\n");
-		show_cacheinfo(m, "cache", c->icache);
-	} else {
-		seq_printf(m, "split (harvard)\n");
-		show_cacheinfo(m, "icache", c->icache);
-		show_cacheinfo(m, "dcache", c->dcache);
-	}
-
-	/* Optional secondary cache */
-	if (c->flags & CPU_HAS_L2_CACHE)
-		show_cacheinfo(m, "scache", c->scache);
-
-	seq_printf(m, "address sizes\t: %u bits physical\n", c->phys_bits);
-
-	seq_printf(m, "bogomips\t: %lu.%02lu\n",
-		     c->loops_per_jiffy/(500000/HZ),
-		     (c->loops_per_jiffy/(5000/HZ)) % 100);
-
-	return 0;
-}
-
-static void *c_start(struct seq_file *m, loff_t *pos)
-{
-	return *pos < NR_CPUS ? cpu_data + *pos : NULL;
-}
-static void *c_next(struct seq_file *m, void *v, loff_t *pos)
-{
-	++*pos;
-	return c_start(m, pos);
-}
-static void c_stop(struct seq_file *m, void *v)
-{
-}
-const struct seq_operations cpuinfo_op = {
-	.start	= c_start,
-	.next	= c_next,
-	.stop	= c_stop,
-	.show	= show_cpuinfo,
-};
-#endif /* CONFIG_PROC_FS */
-- 
cgit v1.2.3-18-g5258


From 6d803ba736abb5e122dede70a4720e4843dd6df4 Mon Sep 17 00:00:00 2001
From: Jean-Christop PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Wed, 17 Nov 2010 10:04:33 +0100
Subject: ARM: 6483/1: arm & sh: factorised duplicated clkdev.c

factorise some generic infrastructure to assist looking up struct clks
for the ARM & SH architecture.

as the code is identical at 99%

put the arch specific code for allocation as example in asm/clkdev.h

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/sh/Kconfig                        |   2 +-
 arch/sh/boards/mach-highlander/setup.c |   2 +-
 arch/sh/include/asm/clkdev.h           |  38 ++++----
 arch/sh/kernel/Makefile                |   2 +-
 arch/sh/kernel/clkdev.c                | 171 ---------------------------------
 arch/sh/kernel/cpu/clock-cpg.c         |   2 +-
 arch/sh/kernel/cpu/clock.c             |  16 ---
 arch/sh/kernel/cpu/sh4/clock-sh4-202.c |   2 +-
 arch/sh/kernel/cpu/sh4a/clock-sh7343.c |   2 +-
 arch/sh/kernel/cpu/sh4a/clock-sh7366.c |   2 +-
 arch/sh/kernel/cpu/sh4a/clock-sh7722.c |   2 +-
 arch/sh/kernel/cpu/sh4a/clock-sh7723.c |   2 +-
 arch/sh/kernel/cpu/sh4a/clock-sh7724.c |   2 +-
 arch/sh/kernel/cpu/sh4a/clock-sh7757.c |   2 +-
 arch/sh/kernel/cpu/sh4a/clock-sh7763.c |   2 +-
 arch/sh/kernel/cpu/sh4a/clock-sh7780.c |   2 +-
 arch/sh/kernel/cpu/sh4a/clock-sh7785.c |   2 +-
 arch/sh/kernel/cpu/sh4a/clock-sh7786.c |   2 +-
 arch/sh/kernel/cpu/sh4a/clock-shx3.c   |   2 +-
 19 files changed, 33 insertions(+), 224 deletions(-)
 delete mode 100644 arch/sh/kernel/clkdev.c

(limited to 'arch/sh')

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 5c075f562eb..cfc51060803 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -1,7 +1,7 @@
 config SUPERH
 	def_bool y
 	select EMBEDDED
-	select HAVE_CLK
+	select CLKDEV_LOOKUP
 	select HAVE_IDE if HAS_IOPORT
 	select HAVE_MEMBLOCK
 	select HAVE_OPROFILE
diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c
index a5ecfbacaf3..87618c91d17 100644
--- a/arch/sh/boards/mach-highlander/setup.c
+++ b/arch/sh/boards/mach-highlander/setup.c
@@ -24,10 +24,10 @@
 #include <linux/interrupt.h>
 #include <linux/usb/r8a66597.h>
 #include <linux/usb/m66592.h>
+#include <linux/clkdev.h>
 #include <net/ax88796.h>
 #include <asm/machvec.h>
 #include <mach/highlander.h>
-#include <asm/clkdev.h>
 #include <asm/clock.h>
 #include <asm/heartbeat.h>
 #include <asm/io.h>
diff --git a/arch/sh/include/asm/clkdev.h b/arch/sh/include/asm/clkdev.h
index 5645f358128..6ba91868201 100644
--- a/arch/sh/include/asm/clkdev.h
+++ b/arch/sh/include/asm/clkdev.h
@@ -1,9 +1,5 @@
 /*
- *  arch/sh/include/asm/clkdev.h
- *
- * Cloned from arch/arm/include/asm/clkdev.h:
- *
- *  Copyright (C) 2008 Russell King.
+ *  Copyright (C) 2010 Paul Mundt <lethal@linux-sh.org>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -11,25 +7,25 @@
  *
  * Helper for the clk API to assist looking up a struct clk.
  */
-#ifndef __ASM_CLKDEV_H
-#define __ASM_CLKDEV_H
 
-struct clk;
+#ifndef __CLKDEV__H_
+#define __CLKDEV__H_
 
-struct clk_lookup {
-	struct list_head	node;
-	const char		*dev_id;
-	const char		*con_id;
-	struct clk		*clk;
-};
+#include <linux/bootmem.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
 
-struct clk_lookup *clkdev_alloc(struct clk *clk, const char *con_id,
-	const char *dev_fmt, ...);
+#include <asm/clock.h>
 
-void clkdev_add(struct clk_lookup *cl);
-void clkdev_drop(struct clk_lookup *cl);
+static inline struct clk_lookup_alloc *__clkdev_alloc(size_t size)
+{
+	if (!slab_is_available())
+		return alloc_bootmem_low_pages(size);
+	else
+		return kzalloc(size, GFP_KERNEL);
+}
 
-void clkdev_add_table(struct clk_lookup *, size_t);
-int clk_add_alias(const char *, const char *, char *, struct device *);
+#define __clk_put(clk)
+#define __clk_get(clk) ({ 1; })
 
-#endif
+#endif /* __CLKDEV_H__ */
diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile
index 8eed6a48544..cf652217952 100644
--- a/arch/sh/kernel/Makefile
+++ b/arch/sh/kernel/Makefile
@@ -11,7 +11,7 @@ endif
 
 CFLAGS_REMOVE_return_address.o = -pg
 
-obj-y	:= clkdev.o debugtraps.o dma-nommu.o dumpstack.o 		\
+obj-y	:= debugtraps.o dma-nommu.o dumpstack.o 		\
 	   idle.o io.o irq.o irq_$(BITS).o kdebugfs.o			\
 	   machvec.o nmi_debug.o process.o				\
 	   process_$(BITS).o ptrace.o ptrace_$(BITS).o			\
diff --git a/arch/sh/kernel/clkdev.c b/arch/sh/kernel/clkdev.c
deleted file mode 100644
index 1f800ef4a73..00000000000
--- a/arch/sh/kernel/clkdev.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * arch/sh/kernel/clkdev.c
- *
- * Cloned from arch/arm/common/clkdev.c:
- *
- *  Copyright (C) 2008 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Helper for the clk API to assist looking up a struct clk.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/mutex.h>
-#include <linux/clk.h>
-#include <linux/slab.h>
-#include <linux/bootmem.h>
-#include <linux/mm.h>
-#include <asm/clock.h>
-#include <asm/clkdev.h>
-
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-
-/*
- * Find the correct struct clk for the device and connection ID.
- * We do slightly fuzzy matching here:
- *  An entry with a NULL ID is assumed to be a wildcard.
- *  If an entry has a device ID, it must match
- *  If an entry has a connection ID, it must match
- * Then we take the most specific entry - with the following
- * order of precedence: dev+con > dev only > con only.
- */
-static struct clk *clk_find(const char *dev_id, const char *con_id)
-{
-	struct clk_lookup *p;
-	struct clk *clk = NULL;
-	int match, best = 0;
-
-	list_for_each_entry(p, &clocks, node) {
-		match = 0;
-		if (p->dev_id) {
-			if (!dev_id || strcmp(p->dev_id, dev_id))
-				continue;
-			match += 2;
-		}
-		if (p->con_id) {
-			if (!con_id || strcmp(p->con_id, con_id))
-				continue;
-			match += 1;
-		}
-		if (match == 0)
-			continue;
-
-		if (match > best) {
-			clk = p->clk;
-			best = match;
-		}
-	}
-	return clk;
-}
-
-struct clk *clk_get_sys(const char *dev_id, const char *con_id)
-{
-	struct clk *clk;
-
-	mutex_lock(&clocks_mutex);
-	clk = clk_find(dev_id, con_id);
-	mutex_unlock(&clocks_mutex);
-
-	return clk ? clk : ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(clk_get_sys);
-
-void clkdev_add(struct clk_lookup *cl)
-{
-	mutex_lock(&clocks_mutex);
-	list_add_tail(&cl->node, &clocks);
-	mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL(clkdev_add);
-
-void __init clkdev_add_table(struct clk_lookup *cl, size_t num)
-{
-	mutex_lock(&clocks_mutex);
-	while (num--) {
-		list_add_tail(&cl->node, &clocks);
-		cl++;
-	}
-	mutex_unlock(&clocks_mutex);
-}
-
-#define MAX_DEV_ID	20
-#define MAX_CON_ID	16
-
-struct clk_lookup_alloc {
-	struct clk_lookup cl;
-	char	dev_id[MAX_DEV_ID];
-	char	con_id[MAX_CON_ID];
-};
-
-struct clk_lookup * __init_refok
-clkdev_alloc(struct clk *clk, const char *con_id, const char *dev_fmt, ...)
-{
-	struct clk_lookup_alloc *cla;
-
-	if (!slab_is_available())
-		cla = alloc_bootmem_low_pages(sizeof(*cla));
-	else
-		cla = kzalloc(sizeof(*cla), GFP_KERNEL);
-
-	if (!cla)
-		return NULL;
-
-	cla->cl.clk = clk;
-	if (con_id) {
-		strlcpy(cla->con_id, con_id, sizeof(cla->con_id));
-		cla->cl.con_id = cla->con_id;
-	}
-
-	if (dev_fmt) {
-		va_list ap;
-
-		va_start(ap, dev_fmt);
-		vscnprintf(cla->dev_id, sizeof(cla->dev_id), dev_fmt, ap);
-		cla->cl.dev_id = cla->dev_id;
-		va_end(ap);
-	}
-
-	return &cla->cl;
-}
-EXPORT_SYMBOL(clkdev_alloc);
-
-int clk_add_alias(const char *alias, const char *alias_dev_name, char *id,
-	struct device *dev)
-{
-	struct clk *r = clk_get(dev, id);
-	struct clk_lookup *l;
-
-	if (IS_ERR(r))
-		return PTR_ERR(r);
-
-	l = clkdev_alloc(r, alias, alias_dev_name);
-	clk_put(r);
-	if (!l)
-		return -ENODEV;
-	clkdev_add(l);
-	return 0;
-}
-EXPORT_SYMBOL(clk_add_alias);
-
-/*
- * clkdev_drop - remove a clock dynamically allocated
- */
-void clkdev_drop(struct clk_lookup *cl)
-{
-	struct clk_lookup_alloc *cla = container_of(cl, struct clk_lookup_alloc, cl);
-
-	mutex_lock(&clocks_mutex);
-	list_del(&cl->node);
-	mutex_unlock(&clocks_mutex);
-	kfree(cla);
-}
-EXPORT_SYMBOL(clkdev_drop);
diff --git a/arch/sh/kernel/cpu/clock-cpg.c b/arch/sh/kernel/cpu/clock-cpg.c
index e2f63d68da5..dd0e0f21135 100644
--- a/arch/sh/kernel/cpu/clock-cpg.c
+++ b/arch/sh/kernel/cpu/clock-cpg.c
@@ -2,7 +2,7 @@
 #include <linux/compiler.h>
 #include <linux/slab.h>
 #include <linux/io.h>
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 #include <asm/clock.h>
 
 static struct clk master_clk = {
diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c
index 50f887dda56..4187cf4fe18 100644
--- a/arch/sh/kernel/cpu/clock.c
+++ b/arch/sh/kernel/cpu/clock.c
@@ -48,20 +48,4 @@ int __init clk_init(void)
 	return ret;
 }
 
-/*
- * Returns a clock. Note that we first try to use device id on the bus
- * and clock name. If this fails, we try to use clock name only.
- */
-struct clk *clk_get(struct device *dev, const char *con_id)
-{
-	const char *dev_id = dev ? dev_name(dev) : NULL;
-
-	return clk_get_sys(dev_id, con_id);
-}
-EXPORT_SYMBOL_GPL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL_GPL(clk_put);
 
diff --git a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
index 4eabc68cd75..6c1492b8431 100644
--- a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
+++ b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
@@ -13,7 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/err.h>
 #include <linux/io.h>
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 #include <asm/clock.h>
 #include <asm/freq.h>
 
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
index 71291ae201b..93c646072c1 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
@@ -21,7 +21,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 #include <asm/clock.h>
 
 /* SH7343 registers */
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7366.c b/arch/sh/kernel/cpu/sh4a/clock-sh7366.c
index 7ce5bbcd408..049dc0628cc 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7366.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7366.c
@@ -21,7 +21,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 #include <asm/clock.h>
 
 /* SH7366 registers */
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
index 2030f3d9fac..9d23a36f064 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
@@ -21,7 +21,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 #include <asm/clock.h>
 #include <asm/hwblk.h>
 #include <cpu/sh7722.h>
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
index d3938f0d370..55493cd5bd8 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
@@ -22,7 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 #include <linux/clk.h>
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 #include <asm/clock.h>
 #include <asm/hwblk.h>
 #include <cpu/sh7723.h>
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
index 2d9700c6b53..527936bb3ce 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
@@ -22,7 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 #include <linux/clk.h>
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 #include <asm/clock.h>
 #include <asm/hwblk.h>
 #include <cpu/sh7724.h>
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
index ce39a2ae8c6..e073e3eb4c3 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 #include <asm/clock.h>
 #include <asm/freq.h>
 
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7763.c b/arch/sh/kernel/cpu/sh4a/clock-sh7763.c
index 1f1df48008c..599630fc4d3 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7763.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7763.c
@@ -13,7 +13,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 #include <asm/clock.h>
 #include <asm/freq.h>
 #include <asm/io.h>
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7780.c b/arch/sh/kernel/cpu/sh4a/clock-sh7780.c
index 62d70635006..8894926479a 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7780.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7780.c
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 #include <asm/clock.h>
 #include <asm/freq.h>
 #include <asm/io.h>
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
index c3e458aaa2b..2d960247f3e 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
@@ -14,7 +14,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/cpufreq.h>
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 #include <asm/clock.h>
 #include <asm/freq.h>
 #include <cpu/sh7785.h>
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7786.c b/arch/sh/kernel/cpu/sh4a/clock-sh7786.c
index 597c9fbe49c..42e403be907 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7786.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7786.c
@@ -13,7 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 #include <asm/clock.h>
 #include <asm/freq.h>
 
diff --git a/arch/sh/kernel/cpu/sh4a/clock-shx3.c b/arch/sh/kernel/cpu/sh4a/clock-shx3.c
index 4f70df6b616..1afdb93b8cc 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-shx3.c
@@ -14,7 +14,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 #include <asm/clock.h>
 #include <asm/freq.h>
 
-- 
cgit v1.2.3-18-g5258


From 004417a6d468e24399e383645c068b498eed84ad Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Thu, 25 Nov 2010 18:38:29 +0100
Subject: perf, arch: Cleanup perf-pmu init vs lockup-detector

The perf hardware pmu got initialized at various points in the boot,
some before early_initcall() some after (notably arch_initcall).

The problem is that the NMI lockup detector is ran from early_initcall()
and expects the hardware pmu to be present.

Sanitize this by moving all architecture hardware pmu implementations to
initialize at early_initcall() and move the lockup detector to an explicit
initcall right after that.

Cc: paulus <paulus@samba.org>
Cc: davem <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1290707759.2145.119.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/sh/kernel/cpu/sh4/perf_event.c  | 2 +-
 arch/sh/kernel/cpu/sh4a/perf_event.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/cpu/sh4/perf_event.c b/arch/sh/kernel/cpu/sh4/perf_event.c
index dbf3b4bb71f..748955df018 100644
--- a/arch/sh/kernel/cpu/sh4/perf_event.c
+++ b/arch/sh/kernel/cpu/sh4/perf_event.c
@@ -250,4 +250,4 @@ static int __init sh7750_pmu_init(void)
 
 	return register_sh_pmu(&sh7750_pmu);
 }
-arch_initcall(sh7750_pmu_init);
+early_initcall(sh7750_pmu_init);
diff --git a/arch/sh/kernel/cpu/sh4a/perf_event.c b/arch/sh/kernel/cpu/sh4a/perf_event.c
index 58027652573..17e6bebfede 100644
--- a/arch/sh/kernel/cpu/sh4a/perf_event.c
+++ b/arch/sh/kernel/cpu/sh4a/perf_event.c
@@ -284,4 +284,4 @@ static int __init sh4a_pmu_init(void)
 
 	return register_sh_pmu(&sh4a_pmu);
 }
-arch_initcall(sh4a_pmu_init);
+early_initcall(sh4a_pmu_init);
-- 
cgit v1.2.3-18-g5258


From 852af59f6084bf1c48df16d2728216705621d598 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 13 Dec 2010 15:33:16 +0900
Subject: sh: mach-rsk: Add polled GPIO buttons support for RSK+7203.

Now that there's an upstream polled gpio-keys driver, add the outstanding
platform data for it.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-rsk/devices-rsk7203.c | 37 ++++++++++++++++++++++++++++++-
 1 file changed, 36 insertions(+), 1 deletion(-)

(limited to 'arch/sh')

diff --git a/arch/sh/boards/mach-rsk/devices-rsk7203.c b/arch/sh/boards/mach-rsk/devices-rsk7203.c
index 4fa08ba1025..a8089f79d05 100644
--- a/arch/sh/boards/mach-rsk/devices-rsk7203.c
+++ b/arch/sh/boards/mach-rsk/devices-rsk7203.c
@@ -1,7 +1,7 @@
 /*
  * Renesas Technology Europe RSK+ 7203 Support.
  *
- * Copyright (C) 2008 Paul Mundt
+ * Copyright (C) 2008 - 2010  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -12,7 +12,9 @@
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/smsc911x.h>
+#include <linux/input.h>
 #include <linux/gpio.h>
+#include <linux/gpio_keys.h>
 #include <linux/leds.h>
 #include <asm/machvec.h>
 #include <asm/io.h>
@@ -84,9 +86,42 @@ static struct platform_device led_device = {
 	},
 };
 
+static struct gpio_keys_button rsk7203_gpio_keys_table[] = {
+	{
+		.code		= BTN_0,
+		.gpio		= GPIO_PB0,
+		.active_low	= 1,
+		.desc		= "SW1",
+	}, {
+		.code		= BTN_1,
+		.gpio		= GPIO_PB1,
+		.active_low	= 1,
+		.desc		= "SW2",
+	}, {
+		.code		= BTN_2,
+		.gpio		= GPIO_PB2,
+		.active_low	= 1,
+		.desc		= "SW3",
+	},
+};
+
+static struct gpio_keys_platform_data rsk7203_gpio_keys_info = {
+	.buttons	= rsk7203_gpio_keys_table,
+	.nbuttons	= ARRAY_SIZE(rsk7203_gpio_keys_table),
+	.poll_interval	= 50, /* default to 50ms */
+};
+
+static struct platform_device keys_device = {
+	.name		= "gpio-keys-polled",
+	.dev		= {
+		.platform_data	= &rsk7203_gpio_keys_info,
+	},
+};
+
 static struct platform_device *rsk7203_devices[] __initdata = {
 	&smsc911x_device,
 	&led_device,
+	&keys_device,
 };
 
 static int __init rsk7203_devices_setup(void)
-- 
cgit v1.2.3-18-g5258


From 2e80a82a49c4c7eca4e35734380f28298ba5db19 Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Wed, 17 Nov 2010 23:17:36 +0100
Subject: perf: Dynamic pmu types

Extend the perf_pmu_register() interface to allow for named and
dynamic pmu types.

Because we need to support the existing static types we cannot use
dynamic types for everything, hence provide a type argument.

If we want to enumerate the PMUs they need a name, provide one.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20101117222056.259707703@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/sh/kernel/perf_event.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/perf_event.c b/arch/sh/kernel/perf_event.c
index 5a4b3343565..2ee21a47b5a 100644
--- a/arch/sh/kernel/perf_event.c
+++ b/arch/sh/kernel/perf_event.c
@@ -389,7 +389,7 @@ int __cpuinit register_sh_pmu(struct sh_pmu *_pmu)
 
 	WARN_ON(_pmu->num_events > MAX_HWEVENTS);
 
-	perf_pmu_register(&pmu);
+	perf_pmu_register(&pmu, "cpu", PERF_TYPE_RAW);
 	perf_cpu_notifier(sh_pmu_notifier);
 	return 0;
 }
-- 
cgit v1.2.3-18-g5258


From 76496f8f2e104b8bb08db09c063a6817d18829a6 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 17 Dec 2010 18:58:04 +0900
Subject: sh: mach-sdk7786: Handle baseboard NMI source selection.

The on-board NMI switch is routed through and mangled by the FPGA prior
to its delivery to the NMI pin, so add some glue for the various
configuration options. The default is to unmask it and enable all input
sources.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-sdk7786/Makefile     |  2 +-
 arch/sh/boards/mach-sdk7786/nmi.c        | 83 ++++++++++++++++++++++++++++++++
 arch/sh/boards/mach-sdk7786/setup.c      |  1 +
 arch/sh/include/mach-sdk7786/mach/fpga.h |  8 +++
 4 files changed, 93 insertions(+), 1 deletion(-)
 create mode 100644 arch/sh/boards/mach-sdk7786/nmi.c

(limited to 'arch/sh')

diff --git a/arch/sh/boards/mach-sdk7786/Makefile b/arch/sh/boards/mach-sdk7786/Makefile
index 23ff7d4ac49..8ae56e9560a 100644
--- a/arch/sh/boards/mach-sdk7786/Makefile
+++ b/arch/sh/boards/mach-sdk7786/Makefile
@@ -1,4 +1,4 @@
-obj-y	:= fpga.o irq.o setup.o
+obj-y	:= fpga.o irq.o nmi.o setup.o
 
 obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
 obj-$(CONFIG_HAVE_SRAM_POOL)	+= sram.o
diff --git a/arch/sh/boards/mach-sdk7786/nmi.c b/arch/sh/boards/mach-sdk7786/nmi.c
new file mode 100644
index 00000000000..edcfa1f568b
--- /dev/null
+++ b/arch/sh/boards/mach-sdk7786/nmi.c
@@ -0,0 +1,83 @@
+/*
+ * SDK7786 FPGA NMI Support.
+ *
+ * Copyright (C) 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <mach/fpga.h>
+
+enum {
+	NMI_MODE_MANUAL,
+	NMI_MODE_AUX,
+	NMI_MODE_MASKED,
+	NMI_MODE_ANY,
+	NMI_MODE_UNKNOWN,
+};
+
+/*
+ * Default to the manual NMI switch.
+ */
+static unsigned int __initdata nmi_mode = NMI_MODE_ANY;
+
+static int __init nmi_mode_setup(char *str)
+{
+	if (!str)
+		return 0;
+
+	if (strcmp(str, "manual") == 0)
+		nmi_mode = NMI_MODE_MANUAL;
+	else if (strcmp(str, "aux") == 0)
+		nmi_mode = NMI_MODE_AUX;
+	else if (strcmp(str, "masked") == 0)
+		nmi_mode = NMI_MODE_MASKED;
+	else if (strcmp(str, "any") == 0)
+		nmi_mode = NMI_MODE_ANY;
+	else {
+		nmi_mode = NMI_MODE_UNKNOWN;
+		pr_warning("Unknown NMI mode %s\n", str);
+	}
+
+	printk("Set NMI mode to %d\n", nmi_mode);
+	return 0;
+}
+early_param("nmi_mode", nmi_mode_setup);
+
+void __init sdk7786_nmi_init(void)
+{
+	unsigned int source, mask, tmp;
+
+	switch (nmi_mode) {
+	case NMI_MODE_MANUAL:
+		source = NMISR_MAN_NMI;
+		mask = NMIMR_MAN_NMIM;
+		break;
+	case NMI_MODE_AUX:
+		source = NMISR_AUX_NMI;
+		mask = NMIMR_AUX_NMIM;
+		break;
+	case NMI_MODE_ANY:
+		source = NMISR_MAN_NMI | NMISR_AUX_NMI;
+		mask = NMIMR_MAN_NMIM | NMIMR_AUX_NMIM;
+		break;
+	case NMI_MODE_MASKED:
+	case NMI_MODE_UNKNOWN:
+	default:
+		source = mask = 0;
+		break;
+	}
+
+	/* Set the NMI source */
+	tmp = fpga_read_reg(NMISR);
+	tmp &= ~NMISR_MASK;
+	tmp |= source;
+	fpga_write_reg(tmp, NMISR);
+
+	/* And the IRQ masking */
+	fpga_write_reg(NMIMR_MASK ^ mask, NMIMR);
+}
diff --git a/arch/sh/boards/mach-sdk7786/setup.c b/arch/sh/boards/mach-sdk7786/setup.c
index 7e0c4e3878e..75e4ddbbec3 100644
--- a/arch/sh/boards/mach-sdk7786/setup.c
+++ b/arch/sh/boards/mach-sdk7786/setup.c
@@ -237,6 +237,7 @@ static void __init sdk7786_setup(char **cmdline_p)
 	pr_info("Renesas Technology Europe SDK7786 support:\n");
 
 	sdk7786_fpga_init();
+	sdk7786_nmi_init();
 
 	pr_info("\tPCB revision:\t%d\n", fpga_read_reg(PCBRR) & 0xf);
 
diff --git a/arch/sh/include/mach-sdk7786/mach/fpga.h b/arch/sh/include/mach-sdk7786/mach/fpga.h
index 40f0c2d3690..a9cdac46992 100644
--- a/arch/sh/include/mach-sdk7786/mach/fpga.h
+++ b/arch/sh/include/mach-sdk7786/mach/fpga.h
@@ -14,11 +14,16 @@
 #define INTTESTR	0x040
 #define SYSSR		0x050
 #define NRGPR		0x060
+
 #define NMISR		0x070
+#define  NMISR_MAN_NMI	BIT(0)
+#define  NMISR_AUX_NMI	BIT(1)
+#define  NMISR_MASK	(NMISR_MAN_NMI | NMISR_AUX_NMI)
 
 #define NMIMR		0x080
 #define  NMIMR_MAN_NMIM	BIT(0)	/* Manual NMI mask */
 #define  NMIMR_AUX_NMIM	BIT(1)	/* Auxiliary NMI mask */
+#define  NMIMR_MASK	(NMIMR_MAN_NMIM | NMIMR_AUX_NMIM)
 
 #define INTBSR		0x090
 #define INTBMR		0x0a0
@@ -126,6 +131,9 @@
 extern void __iomem *sdk7786_fpga_base;
 extern void sdk7786_fpga_init(void);
 
+/* arch/sh/boards/mach-sdk7786/nmi.c */
+extern void sdk7786_nmi_init(void);
+
 #define SDK7786_FPGA_REGADDR(reg)	(sdk7786_fpga_base + (reg))
 
 /*
-- 
cgit v1.2.3-18-g5258


From 638fa4aad5bbb75c8f0d558aa15dcb543de5fc31 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 24 Dec 2010 11:27:29 +0900
Subject: sh: Fix up SH4-202 clkfwk build.

Some of the SH4-202 code was overlooked in the set_rate() API conversion,
resulting in:

arch/sh/kernel/cpu/sh4/clock-sh4-202.c: error: too many arguments to function 'clk->ops->set_rate'

Fix it up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh4/clock-sh4-202.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
index b601fa3978d..6282a839e08 100644
--- a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
+++ b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
@@ -81,8 +81,7 @@ static void shoc_clk_init(struct clk *clk)
 	for (i = 0; i < ARRAY_SIZE(frqcr3_divisors); i++) {
 		int divisor = frqcr3_divisors[i];
 
-		if (clk->ops->set_rate(clk, clk->parent->rate /
-						divisor, 0) == 0)
+		if (clk->ops->set_rate(clk, clk->parent->rate / divisor) == 0)
 			break;
 	}
 
-- 
cgit v1.2.3-18-g5258


From 27434f0af0fecba71fa58407715028d2b9550956 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 24 Dec 2010 11:30:10 +0900
Subject: sh: mach-se: Fix up SE7206 build.

With some recent tidying of duplicate register definitions the se7206 IRQ
code broke:

arch/sh/boards/mach-se/7206/irq.c: error: 'INTC_ICR' undeclared (first use in this function)
arch/sh/boards/mach-se/7206/irq.c: error: (Each undeclared identifier is reported only once
arch/sh/boards/mach-se/7206/irq.c: error: for each function it appears in.)

Fix it up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-se/7206/irq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/sh')

diff --git a/arch/sh/boards/mach-se/7206/irq.c b/arch/sh/boards/mach-se/7206/irq.c
index d961949600f..9070d7e6070 100644
--- a/arch/sh/boards/mach-se/7206/irq.c
+++ b/arch/sh/boards/mach-se/7206/irq.c
@@ -140,7 +140,7 @@ void __init init_se7206_IRQ(void)
 	make_se7206_irq(IRQ1_IRQ); /* ATA */
 	make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */
 
-	__raw_writew(__raw_readw(INTC_ICR1) | 0x000b, INTC_ICR); /* ICR1 */
+	__raw_writew(__raw_readw(INTC_ICR1) | 0x000b, INTC_ICR1); /* ICR1 */
 
 	/* FPGA System register setup*/
 	__raw_writew(0x0000,INTSTS0); /* Clear INTSTS0 */
-- 
cgit v1.2.3-18-g5258


From 27f1acccd4d310e941d2e879445324595e2fe463 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 24 Dec 2010 12:15:57 +0900
Subject: sh: Fix up SH7201 clkfwk build.

The master clock initialization for SH7201 was wholly bogus. Users of the
legacy API must initialize the clock rate through the struct clk itself
rather than returning the clock frequency. Given that the init function
itself is void, returning the frequency isn't terribly effective.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh2a/clock-sh7201.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7201.c b/arch/sh/kernel/cpu/sh2a/clock-sh7201.c
index b26264dc2ae..c509c40cba4 100644
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7201.c
+++ b/arch/sh/kernel/cpu/sh2a/clock-sh7201.c
@@ -34,7 +34,7 @@ static const int pfc_divisors[]={1,2,3,4,6,8,12};
 
 static void master_clk_init(struct clk *clk)
 {
-	return 10000000 * PLL2 * pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
+	clk->rate = 10000000 * PLL2 * pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
 }
 
 static struct clk_ops sh7201_master_clk_ops = {
-- 
cgit v1.2.3-18-g5258


From 1dee92bba36b491dbcc15e2cba40501403237f96 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 24 Dec 2010 19:19:23 +0900
Subject: sh: Tidy up SH-4A unaligned load support.

The current implementation was rather tied to the packed_struct.h
definitions, which immediately began to clash when the packed_struct.h
types changed and drivers began to include packed_struct.h directly.

In order to support this sort of use it's necessary to get out of the way
with regards to namespace collisions, and at the same time we can also
kill off some duplicate code now that the unaligned headers are a bit
more broken out.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/unaligned-sh4a.h | 164 +++++++++++------------------------
 1 file changed, 52 insertions(+), 112 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/include/asm/unaligned-sh4a.h b/arch/sh/include/asm/unaligned-sh4a.h
index 9f4dd252c98..c48a9c3420d 100644
--- a/arch/sh/include/asm/unaligned-sh4a.h
+++ b/arch/sh/include/asm/unaligned-sh4a.h
@@ -18,10 +18,20 @@
  * of spill registers and blowing up when building at low optimization
  * levels. See http://gcc.gnu.org/bugzilla/show_bug.cgi?id=34777.
  */
+#include <linux/unaligned/packed_struct.h>
 #include <linux/types.h>
 #include <asm/byteorder.h>
 
-static __always_inline u32 __get_unaligned_cpu32(const u8 *p)
+static inline u16 sh4a_get_unaligned_cpu16(const u8 *p)
+{
+#ifdef __LITTLE_ENDIAN
+	return p[0] | p[1] << 8;
+#else
+	return p[0] << 8 | p[1];
+#endif
+}
+
+static __always_inline u32 sh4a_get_unaligned_cpu32(const u8 *p)
 {
 	unsigned long unaligned;
 
@@ -34,218 +44,148 @@ static __always_inline u32 __get_unaligned_cpu32(const u8 *p)
 	return unaligned;
 }
 
-struct __una_u16 { u16 x __attribute__((packed)); };
-struct __una_u32 { u32 x __attribute__((packed)); };
-struct __una_u64 { u64 x __attribute__((packed)); };
-
-static inline u16 __get_unaligned_cpu16(const u8 *p)
-{
-#ifdef __LITTLE_ENDIAN
-	return p[0] | p[1] << 8;
-#else
-	return p[0] << 8 | p[1];
-#endif
-}
-
 /*
  * Even though movua.l supports auto-increment on the read side, it can
  * only store to r0 due to instruction encoding constraints, so just let
  * the compiler sort it out on its own.
  */
-static inline u64 __get_unaligned_cpu64(const u8 *p)
+static inline u64 sh4a_get_unaligned_cpu64(const u8 *p)
 {
 #ifdef __LITTLE_ENDIAN
-	return (u64)__get_unaligned_cpu32(p + 4) << 32 |
-		    __get_unaligned_cpu32(p);
+	return (u64)sh4a_get_unaligned_cpu32(p + 4) << 32 |
+		    sh4a_get_unaligned_cpu32(p);
 #else
-	return (u64)__get_unaligned_cpu32(p) << 32 |
-		    __get_unaligned_cpu32(p + 4);
+	return (u64)sh4a_get_unaligned_cpu32(p) << 32 |
+		    sh4a_get_unaligned_cpu32(p + 4);
 #endif
 }
 
 static inline u16 get_unaligned_le16(const void *p)
 {
-	return le16_to_cpu(__get_unaligned_cpu16(p));
+	return le16_to_cpu(sh4a_get_unaligned_cpu16(p));
 }
 
 static inline u32 get_unaligned_le32(const void *p)
 {
-	return le32_to_cpu(__get_unaligned_cpu32(p));
+	return le32_to_cpu(sh4a_get_unaligned_cpu32(p));
 }
 
 static inline u64 get_unaligned_le64(const void *p)
 {
-	return le64_to_cpu(__get_unaligned_cpu64(p));
+	return le64_to_cpu(sh4a_get_unaligned_cpu64(p));
 }
 
 static inline u16 get_unaligned_be16(const void *p)
 {
-	return be16_to_cpu(__get_unaligned_cpu16(p));
+	return be16_to_cpu(sh4a_get_unaligned_cpu16(p));
 }
 
 static inline u32 get_unaligned_be32(const void *p)
 {
-	return be32_to_cpu(__get_unaligned_cpu32(p));
+	return be32_to_cpu(sh4a_get_unaligned_cpu32(p));
 }
 
 static inline u64 get_unaligned_be64(const void *p)
 {
-	return be64_to_cpu(__get_unaligned_cpu64(p));
+	return be64_to_cpu(sh4a_get_unaligned_cpu64(p));
 }
 
-static inline void __put_le16_noalign(u8 *p, u16 val)
+static inline void nonnative_put_le16(u16 val, u8 *p)
 {
 	*p++ = val;
 	*p++ = val >> 8;
 }
 
-static inline void __put_le32_noalign(u8 *p, u32 val)
+static inline void nonnative_put_le32(u32 val, u8 *p)
 {
-	__put_le16_noalign(p, val);
-	__put_le16_noalign(p + 2, val >> 16);
+	nonnative_put_le16(val, p);
+	nonnative_put_le16(val >> 16, p + 2);
 }
 
-static inline void __put_le64_noalign(u8 *p, u64 val)
+static inline void nonnative_put_le64(u64 val, u8 *p)
 {
-	__put_le32_noalign(p, val);
-	__put_le32_noalign(p + 4, val >> 32);
+	nonnative_put_le32(val, p);
+	nonnative_put_le32(val >> 32, p + 4);
 }
 
-static inline void __put_be16_noalign(u8 *p, u16 val)
+static inline void nonnative_put_be16(u16 val, u8 *p)
 {
 	*p++ = val >> 8;
 	*p++ = val;
 }
 
-static inline void __put_be32_noalign(u8 *p, u32 val)
+static inline void nonnative_put_be32(u32 val, u8 *p)
 {
-	__put_be16_noalign(p, val >> 16);
-	__put_be16_noalign(p + 2, val);
+	nonnative_put_be16(val >> 16, p);
+	nonnative_put_be16(val, p + 2);
 }
 
-static inline void __put_be64_noalign(u8 *p, u64 val)
+static inline void nonnative_put_be64(u64 val, u8 *p)
 {
-	__put_be32_noalign(p, val >> 32);
-	__put_be32_noalign(p + 4, val);
+	nonnative_put_be32(val >> 32, p);
+	nonnative_put_be32(val, p + 4);
 }
 
 static inline void put_unaligned_le16(u16 val, void *p)
 {
 #ifdef __LITTLE_ENDIAN
-	((struct __una_u16 *)p)->x = val;
+	__put_unaligned_cpu16(val, p);
 #else
-	__put_le16_noalign(p, val);
+	nonnative_put_le16(val, p);
 #endif
 }
 
 static inline void put_unaligned_le32(u32 val, void *p)
 {
 #ifdef __LITTLE_ENDIAN
-	((struct __una_u32 *)p)->x = val;
+	__put_unaligned_cpu32(val, p);
 #else
-	__put_le32_noalign(p, val);
+	nonnative_put_le32(val, p);
 #endif
 }
 
 static inline void put_unaligned_le64(u64 val, void *p)
 {
 #ifdef __LITTLE_ENDIAN
-	((struct __una_u64 *)p)->x = val;
+	__put_unaligned_cpu64(val, p);
 #else
-	__put_le64_noalign(p, val);
+	nonnative_put_le64(val, p);
 #endif
 }
 
 static inline void put_unaligned_be16(u16 val, void *p)
 {
 #ifdef __BIG_ENDIAN
-	((struct __una_u16 *)p)->x = val;
+	__put_unaligned_cpu16(val, p);
 #else
-	__put_be16_noalign(p, val);
+	nonnative_put_be16(val, p);
 #endif
 }
 
 static inline void put_unaligned_be32(u32 val, void *p)
 {
 #ifdef __BIG_ENDIAN
-	((struct __una_u32 *)p)->x = val;
+	__put_unaligned_cpu32(val, p);
 #else
-	__put_be32_noalign(p, val);
+	nonnative_put_be32(val, p);
 #endif
 }
 
 static inline void put_unaligned_be64(u64 val, void *p)
 {
 #ifdef __BIG_ENDIAN
-	((struct __una_u64 *)p)->x = val;
+	__put_unaligned_cpu64(val, p);
 #else
-	__put_be64_noalign(p, val);
+	nonnative_put_be64(val, p);
 #endif
 }
 
 /*
- * Cause a link-time error if we try an unaligned access other than
- * 1,2,4 or 8 bytes long
+ * While it's a bit non-obvious, even though the generic le/be wrappers
+ * use the __get/put_xxx prefixing, they actually wrap in to the
+ * non-prefixed get/put_xxx variants as provided above.
  */
-extern void __bad_unaligned_access_size(void);
-
-#define __get_unaligned_le(ptr) ((__force typeof(*(ptr)))({			\
-	__builtin_choose_expr(sizeof(*(ptr)) == 1, *(ptr),			\
-	__builtin_choose_expr(sizeof(*(ptr)) == 2, get_unaligned_le16((ptr)),	\
-	__builtin_choose_expr(sizeof(*(ptr)) == 4, get_unaligned_le32((ptr)),	\
-	__builtin_choose_expr(sizeof(*(ptr)) == 8, get_unaligned_le64((ptr)),	\
-	__bad_unaligned_access_size()))));					\
-	}))
-
-#define __get_unaligned_be(ptr) ((__force typeof(*(ptr)))({			\
-	__builtin_choose_expr(sizeof(*(ptr)) == 1, *(ptr),			\
-	__builtin_choose_expr(sizeof(*(ptr)) == 2, get_unaligned_be16((ptr)),	\
-	__builtin_choose_expr(sizeof(*(ptr)) == 4, get_unaligned_be32((ptr)),	\
-	__builtin_choose_expr(sizeof(*(ptr)) == 8, get_unaligned_be64((ptr)),	\
-	__bad_unaligned_access_size()))));					\
-	}))
-
-#define __put_unaligned_le(val, ptr) ({					\
-	void *__gu_p = (ptr);						\
-	switch (sizeof(*(ptr))) {					\
-	case 1:								\
-		*(u8 *)__gu_p = (__force u8)(val);			\
-		break;							\
-	case 2:								\
-		put_unaligned_le16((__force u16)(val), __gu_p);		\
-		break;							\
-	case 4:								\
-		put_unaligned_le32((__force u32)(val), __gu_p);		\
-		break;							\
-	case 8:								\
-		put_unaligned_le64((__force u64)(val), __gu_p);		\
-		break;							\
-	default:							\
-		__bad_unaligned_access_size();				\
-		break;							\
-	}								\
-	(void)0; })
-
-#define __put_unaligned_be(val, ptr) ({					\
-	void *__gu_p = (ptr);						\
-	switch (sizeof(*(ptr))) {					\
-	case 1:								\
-		*(u8 *)__gu_p = (__force u8)(val);			\
-		break;							\
-	case 2:								\
-		put_unaligned_be16((__force u16)(val), __gu_p);		\
-		break;							\
-	case 4:								\
-		put_unaligned_be32((__force u32)(val), __gu_p);		\
-		break;							\
-	case 8:								\
-		put_unaligned_be64((__force u64)(val), __gu_p);		\
-		break;							\
-	default:							\
-		__bad_unaligned_access_size();				\
-		break;							\
-	}								\
-	(void)0; })
+#include <linux/unaligned/generic.h>
 
 #ifdef __LITTLE_ENDIAN
 # define get_unaligned __get_unaligned_le
-- 
cgit v1.2.3-18-g5258


From eac676e531214f1e276645613acae7d7c4529035 Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Sat, 1 Jan 2011 18:36:36 +0000
Subject: sh: correct definitions to access stack pointers

A definition like:

#define regs_return_value(regs)	((regs)->regs[0])

called with regs_return_value(foo) will be preprocessed to:

((foo)->foo[0])
        ^^^
So to fix this to ensure the preprocessor compiles such calls correctly.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/ptrace.h    | 4 ++--
 arch/sh/include/asm/ptrace_32.h | 2 +-
 arch/sh/include/asm/ptrace_64.h | 2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/include/asm/ptrace.h b/arch/sh/include/asm/ptrace.h
index f6edc10aa0d..de167d3a1a8 100644
--- a/arch/sh/include/asm/ptrace.h
+++ b/arch/sh/include/asm/ptrace.h
@@ -40,8 +40,8 @@
 #include <asm/system.h>
 
 #define user_mode(regs)			(((regs)->sr & 0x40000000)==0)
-#define user_stack_pointer(regs)	((unsigned long)(regs)->regs[15])
-#define kernel_stack_pointer(regs)	((unsigned long)(regs)->regs[15])
+#define user_stack_pointer(_regs)	((unsigned long)(_regs)->regs[15])
+#define kernel_stack_pointer(_regs)	((unsigned long)(_regs)->regs[15])
 #define instruction_pointer(regs)	((unsigned long)(regs)->pc)
 
 extern void show_regs(struct pt_regs *);
diff --git a/arch/sh/include/asm/ptrace_32.h b/arch/sh/include/asm/ptrace_32.h
index 35d9e257558..6c2239cca1a 100644
--- a/arch/sh/include/asm/ptrace_32.h
+++ b/arch/sh/include/asm/ptrace_32.h
@@ -76,7 +76,7 @@ struct pt_dspregs {
 #ifdef __KERNEL__
 
 #define MAX_REG_OFFSET		offsetof(struct pt_regs, tra)
-#define regs_return_value(regs)	((regs)->regs[0])
+#define regs_return_value(_regs)	((_regs)->regs[0])
 
 #endif /* __KERNEL__ */
 
diff --git a/arch/sh/include/asm/ptrace_64.h b/arch/sh/include/asm/ptrace_64.h
index d43c1cb0bbe..bf9be7764d6 100644
--- a/arch/sh/include/asm/ptrace_64.h
+++ b/arch/sh/include/asm/ptrace_64.h
@@ -13,7 +13,7 @@ struct pt_regs {
 #ifdef __KERNEL__
 
 #define MAX_REG_OFFSET		offsetof(struct pt_regs, tregs[7])
-#define regs_return_value(regs)	((regs)->regs[3])
+#define regs_return_value(_regs)	((_regs)->regs[3])
 
 #endif /* __KERNEL__ */
 
-- 
cgit v1.2.3-18-g5258


From 6f09e41d704fe0bc9157a5357480751d39361d01 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Thu, 6 Jan 2011 05:33:15 +0000
Subject: sh: include Migo-R TS driver in Migo-R defconfig

This patch enables the Migo-R specific touch screen
driver in the Migo-R defconfig.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/configs/migor_defconfig | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch/sh')

diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
index 9ad904a110d..cc61eda4492 100644
--- a/arch/sh/configs/migor_defconfig
+++ b/arch/sh/configs/migor_defconfig
@@ -54,6 +54,8 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
 CONFIG_KEYBOARD_SH_KEYSC=y
 # CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_MIGOR=y
 # CONFIG_SERIO is not set
 CONFIG_VT_HW_CONSOLE_BINDING=y
 CONFIG_SERIAL_SH_SCI=y
-- 
cgit v1.2.3-18-g5258