From 37b7a97884ba64bf7d403351ac2a9476ab4f1bba Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 1 Nov 2010 09:49:04 -0400 Subject: sh: machvec IO death. This takes a bit of a sledgehammer to the machvec I/O routines. The iomem case requires no special casing and so can just be dropped outright. This only leaves the ioport casing for PCI and SuperIO mangling. With the SuperIO case going through the standard ioport mapping, it's possible to replace everything with generic routines. With this done the standard I/O routines are tidied up and NO_IOPORT now gets default-enabled for the vast majority of boards. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 3 +- arch/sh/boards/board-secureedge5410.c | 2 - arch/sh/drivers/pci/pci.c | 3 +- arch/sh/include/asm/io.h | 345 ++++++++++++++++++---------------- arch/sh/include/asm/io_generic.h | 25 --- arch/sh/include/asm/machvec.h | 21 --- arch/sh/kernel/Makefile | 6 +- arch/sh/kernel/io_generic.c | 180 ------------------ arch/sh/kernel/iomap.c | 165 ++++++++++++++++ arch/sh/kernel/ioport.c | 43 +++++ arch/sh/kernel/machvec.c | 22 --- 11 files changed, 396 insertions(+), 419 deletions(-) delete mode 100644 arch/sh/kernel/io_generic.c create mode 100644 arch/sh/kernel/iomap.c create mode 100644 arch/sh/kernel/ioport.c (limited to 'arch/sh') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 5c075f562eb..32cd5f131e4 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -161,7 +161,8 @@ config ARCH_HAS_CPU_IDLE_WAIT def_bool y config NO_IOPORT - bool + def_bool !PCI + depends on !SH_CAYMAN && !SH_SH4202_MICRODEV config IO_TRAPPED bool diff --git a/arch/sh/boards/board-secureedge5410.c b/arch/sh/boards/board-secureedge5410.c index 32f875e8493..f968f17891a 100644 --- a/arch/sh/boards/board-secureedge5410.c +++ b/arch/sh/boards/board-secureedge5410.c @@ -29,8 +29,6 @@ unsigned short secureedge5410_ioport; */ static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id) { - ctrl_delay(); /* dummy read */ - printk("SnapGear: erase switch interrupt!\n"); return IRQ_HANDLED; diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index 60ee09a4e12..a09c77dd09d 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -382,14 +382,13 @@ static void __iomem *ioport_map_pci(struct pci_dev *dev, struct pci_channel *chan = dev->sysdata; if (unlikely(!chan->io_map_base)) { - chan->io_map_base = generic_io_base; + chan->io_map_base = sh_io_port_base; if (pci_domains_supported) panic("To avoid data corruption io_map_base MUST be " "set with multiple PCI domains."); } - return (void __iomem *)(chan->io_map_base + port); } diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h index b237d525d59..89ab2c57a4c 100644 --- a/arch/sh/include/asm/io.h +++ b/arch/sh/include/asm/io.h @@ -1,5 +1,6 @@ #ifndef __ASM_SH_IO_H #define __ASM_SH_IO_H + /* * Convention: * read{b,w,l,q}/write{b,w,l,q} are for PCI, @@ -15,12 +16,6 @@ * SuperH specific I/O (raw I/O to on-chip CPU peripherals). In practice * these have the same semantics as the __raw variants, and as such, all * new code should be using the __raw versions. - * - * All ISA I/O routines are wrapped through the machine vector. If a - * board does not provide overrides, a generic set that are copied in - * from the default machine vector are used instead. These are largely - * for old compat code for I/O offseting to SuperIOs, all of which are - * better handled through the machvec ioport mapping routines these days. */ #include #include @@ -31,39 +26,10 @@ #include #ifdef __KERNEL__ -/* - * Depending on which platform we are running on, we need different - * I/O functions. - */ -#define __IO_PREFIX generic +#define __IO_PREFIX generic #include #include -#ifdef CONFIG_HAS_IOPORT - -#define inb(p) sh_mv.mv_inb((p)) -#define inw(p) sh_mv.mv_inw((p)) -#define inl(p) sh_mv.mv_inl((p)) -#define outb(x,p) sh_mv.mv_outb((x),(p)) -#define outw(x,p) sh_mv.mv_outw((x),(p)) -#define outl(x,p) sh_mv.mv_outl((x),(p)) - -#define inb_p(p) sh_mv.mv_inb_p((p)) -#define inw_p(p) sh_mv.mv_inw_p((p)) -#define inl_p(p) sh_mv.mv_inl_p((p)) -#define outb_p(x,p) sh_mv.mv_outb_p((x),(p)) -#define outw_p(x,p) sh_mv.mv_outw_p((x),(p)) -#define outl_p(x,p) sh_mv.mv_outl_p((x),(p)) - -#define insb(p,b,c) sh_mv.mv_insb((p), (b), (c)) -#define insw(p,b,c) sh_mv.mv_insw((p), (b), (c)) -#define insl(p,b,c) sh_mv.mv_insl((p), (b), (c)) -#define outsb(p,b,c) sh_mv.mv_outsb((p), (b), (c)) -#define outsw(p,b,c) sh_mv.mv_outsw((p), (b), (c)) -#define outsl(p,b,c) sh_mv.mv_outsl((p), (b), (c)) - -#endif - #define __raw_writeb(v,a) (__chk_io_ptr(a), *(volatile u8 __force *)(a) = (v)) #define __raw_writew(v,a) (__chk_io_ptr(a), *(volatile u16 __force *)(a) = (v)) #define __raw_writel(v,a) (__chk_io_ptr(a), *(volatile u32 __force *)(a) = (v)) @@ -74,68 +40,39 @@ #define __raw_readl(a) (__chk_io_ptr(a), *(volatile u32 __force *)(a)) #define __raw_readq(a) (__chk_io_ptr(a), *(volatile u64 __force *)(a)) -#define readb(a) ({ u8 r_ = __raw_readb(a); mb(); r_; }) -#define readw(a) ({ u16 r_ = __raw_readw(a); mb(); r_; }) -#define readl(a) ({ u32 r_ = __raw_readl(a); mb(); r_; }) -#define readq(a) ({ u64 r_ = __raw_readq(a); mb(); r_; }) - -#define writeb(v,a) ({ __raw_writeb((v),(a)); mb(); }) -#define writew(v,a) ({ __raw_writew((v),(a)); mb(); }) -#define writel(v,a) ({ __raw_writel((v),(a)); mb(); }) -#define writeq(v,a) ({ __raw_writeq((v),(a)); mb(); }) - -/* - * Legacy SuperH on-chip I/O functions - * - * These are all deprecated, all new (and especially cross-platform) code - * should be using the __raw_xxx() routines directly. - */ -static inline u8 __deprecated ctrl_inb(unsigned long addr) -{ - return __raw_readb(addr); -} - -static inline u16 __deprecated ctrl_inw(unsigned long addr) -{ - return __raw_readw(addr); -} - -static inline u32 __deprecated ctrl_inl(unsigned long addr) -{ - return __raw_readl(addr); -} - -static inline u64 __deprecated ctrl_inq(unsigned long addr) -{ - return __raw_readq(addr); -} - -static inline void __deprecated ctrl_outb(u8 v, unsigned long addr) -{ - __raw_writeb(v, addr); -} - -static inline void __deprecated ctrl_outw(u16 v, unsigned long addr) -{ - __raw_writew(v, addr); -} - -static inline void __deprecated ctrl_outl(u32 v, unsigned long addr) -{ - __raw_writel(v, addr); -} - -static inline void __deprecated ctrl_outq(u64 v, unsigned long addr) -{ - __raw_writeq(v, addr); -} - -extern unsigned long generic_io_base; - -static inline void ctrl_delay(void) -{ - __raw_readw(generic_io_base); -} +#define readb_relaxed(c) ({ u8 __v = __raw_readb(c); __v; }) +#define readw_relaxed(c) ({ u16 __v = le16_to_cpu((__force __le16) \ + __raw_readw(c)); __v; }) +#define readl_relaxed(c) ({ u32 __v = le32_to_cpu((__force __le32) \ + __raw_readl(c)); __v; }) +#define readq_relaxed(c) ({ u64 __v = le64_to_cpu((__force __le64) \ + __raw_readq(c)); __v; }) + +#define writeb_relaxed(v,c) ((void)__raw_writeb(v,c)) +#define writew_relaxed(v,c) ((void)__raw_writew((__force u16) \ + cpu_to_le16(v),c)) +#define writel_relaxed(v,c) ((void)__raw_writel((__force u32) \ + cpu_to_le32(v),c)) +#define writeq_relaxed(v,c) ((void)__raw_writeq((__force u64) \ + cpu_to_le64(v),c)) + +#define readb(a) ({ u8 r_ = readb_relaxed(a); rmb(); r_; }) +#define readw(a) ({ u16 r_ = readw_relaxed(a); rmb(); r_; }) +#define readl(a) ({ u32 r_ = readl_relaxed(a); rmb(); r_; }) +#define readq(a) ({ u64 r_ = readq_relaxed(a); rmb(); r_; }) + +#define writeb(v,a) ({ wmb(); writeb_relaxed((v),(a)); }) +#define writew(v,a) ({ wmb(); writew_relaxed((v),(a)); }) +#define writel(v,a) ({ wmb(); writel_relaxed((v),(a)); }) +#define writeq(v,a) ({ wmb(); writeq_relaxed((v),(a)); }) + +#define readsb(p,d,l) __raw_readsb(p,d,l) +#define readsw(p,d,l) __raw_readsw(p,d,l) +#define readsl(p,d,l) __raw_readsl(p,d,l) + +#define writesb(p,d,l) __raw_writesb(p,d,l) +#define writesw(p,d,l) __raw_writesw(p,d,l) +#define writesl(p,d,l) __raw_writesl(p,d,l) #define __BUILD_UNCACHED_IO(bwlq, type) \ static inline type read##bwlq##_uncached(unsigned long addr) \ @@ -159,10 +96,11 @@ __BUILD_UNCACHED_IO(w, u16) __BUILD_UNCACHED_IO(l, u32) __BUILD_UNCACHED_IO(q, u64) -#define __BUILD_MEMORY_STRING(bwlq, type) \ +#define __BUILD_MEMORY_STRING(pfx, bwlq, type) \ \ -static inline void __raw_writes##bwlq(volatile void __iomem *mem, \ - const void *addr, unsigned int count) \ +static inline void \ +pfx##writes##bwlq(volatile void __iomem *mem, const void *addr, \ + unsigned int count) \ { \ const volatile type *__addr = addr; \ \ @@ -172,8 +110,8 @@ static inline void __raw_writes##bwlq(volatile void __iomem *mem, \ } \ } \ \ -static inline void __raw_reads##bwlq(volatile void __iomem *mem, \ - void *addr, unsigned int count) \ +static inline void pfx##reads##bwlq(volatile void __iomem *mem, \ + void *addr, unsigned int count) \ { \ volatile type *__addr = addr; \ \ @@ -183,85 +121,166 @@ static inline void __raw_reads##bwlq(volatile void __iomem *mem, \ } \ } -__BUILD_MEMORY_STRING(b, u8) -__BUILD_MEMORY_STRING(w, u16) +__BUILD_MEMORY_STRING(__raw_, b, u8) +__BUILD_MEMORY_STRING(__raw_, w, u16) #ifdef CONFIG_SUPERH32 void __raw_writesl(void __iomem *addr, const void *data, int longlen); void __raw_readsl(const void __iomem *addr, void *data, int longlen); #else -__BUILD_MEMORY_STRING(l, u32) +__BUILD_MEMORY_STRING(__raw_, l, u32) #endif -__BUILD_MEMORY_STRING(q, u64) - -#define writesb __raw_writesb -#define writesw __raw_writesw -#define writesl __raw_writesl - -#define readsb __raw_readsb -#define readsw __raw_readsw -#define readsl __raw_readsl - -#define readb_relaxed(a) readb(a) -#define readw_relaxed(a) readw(a) -#define readl_relaxed(a) readl(a) -#define readq_relaxed(a) readq(a) - -#ifndef CONFIG_GENERIC_IOMAP -/* Simple MMIO */ -#define ioread8(a) __raw_readb(a) -#define ioread16(a) __raw_readw(a) -#define ioread16be(a) be16_to_cpu(__raw_readw((a))) -#define ioread32(a) __raw_readl(a) -#define ioread32be(a) be32_to_cpu(__raw_readl((a))) - -#define iowrite8(v,a) __raw_writeb((v),(a)) -#define iowrite16(v,a) __raw_writew((v),(a)) -#define iowrite16be(v,a) __raw_writew(cpu_to_be16((v)),(a)) -#define iowrite32(v,a) __raw_writel((v),(a)) -#define iowrite32be(v,a) __raw_writel(cpu_to_be32((v)),(a)) - -#define ioread8_rep(a, d, c) __raw_readsb((a), (d), (c)) -#define ioread16_rep(a, d, c) __raw_readsw((a), (d), (c)) -#define ioread32_rep(a, d, c) __raw_readsl((a), (d), (c)) - -#define iowrite8_rep(a, s, c) __raw_writesb((a), (s), (c)) -#define iowrite16_rep(a, s, c) __raw_writesw((a), (s), (c)) -#define iowrite32_rep(a, s, c) __raw_writesl((a), (s), (c)) +__BUILD_MEMORY_STRING(__raw_, q, u64) + +#ifdef CONFIG_HAS_IOPORT + +/* + * Slowdown I/O port space accesses for antique hardware. + */ +#undef CONF_SLOWDOWN_IO + +/* + * On SuperH I/O ports are memory mapped, so we access them using normal + * load/store instructions. sh_io_port_base is the virtual address to + * which all ports are being mapped. + */ +extern const unsigned long sh_io_port_base; + +static inline void __set_io_port_base(unsigned long pbase) +{ + *(unsigned long *)&sh_io_port_base = pbase; + barrier(); +} + +#ifdef CONFIG_GENERIC_IOMAP +#define __ioport_map ioport_map +#else +extern void __iomem *__ioport_map(unsigned long addr, unsigned int size); #endif -#define mmio_insb(p,d,c) __raw_readsb(p,d,c) -#define mmio_insw(p,d,c) __raw_readsw(p,d,c) -#define mmio_insl(p,d,c) __raw_readsl(p,d,c) +#ifdef CONF_SLOWDOWN_IO +#define SLOW_DOWN_IO __raw_readw(sh_io_port_base) +#else +#define SLOW_DOWN_IO +#endif -#define mmio_outsb(p,s,c) __raw_writesb(p,s,c) -#define mmio_outsw(p,s,c) __raw_writesw(p,s,c) -#define mmio_outsl(p,s,c) __raw_writesl(p,s,c) +#define __BUILD_IOPORT_SINGLE(pfx, bwlq, type, p, slow) \ + \ +static inline void pfx##out##bwlq##p(type val, unsigned long port) \ +{ \ + volatile type *__addr; \ + \ + __addr = __ioport_map(port, sizeof(type)); \ + *__addr = val; \ + slow; \ +} \ + \ +static inline type pfx##in##bwlq##p(unsigned long port) \ +{ \ + volatile type *__addr; \ + type __val; \ + \ + __addr = __ioport_map(port, sizeof(type)); \ + __val = *__addr; \ + slow; \ + \ + return __val; \ +} -/* synco on SH-4A, otherwise a nop */ -#define mmiowb() wmb() +#define __BUILD_IOPORT_PFX(bus, bwlq, type) \ + __BUILD_IOPORT_SINGLE(bus, bwlq, type, ,) \ + __BUILD_IOPORT_SINGLE(bus, bwlq, type, _p, SLOW_DOWN_IO) -#define IO_SPACE_LIMIT 0xffffffff +#define BUILDIO_IOPORT(bwlq, type) \ + __BUILD_IOPORT_PFX(, bwlq, type) -#ifdef CONFIG_HAS_IOPORT +BUILDIO_IOPORT(b, u8) +BUILDIO_IOPORT(w, u16) +BUILDIO_IOPORT(l, u32) +BUILDIO_IOPORT(q, u64) + +#define __BUILD_IOPORT_STRING(bwlq, type) \ + \ +static inline void outs##bwlq(unsigned long port, const void *addr, \ + unsigned int count) \ +{ \ + const volatile type *__addr = addr; \ + \ + while (count--) { \ + out##bwlq(*__addr, port); \ + __addr++; \ + } \ +} \ + \ +static inline void ins##bwlq(unsigned long port, void *addr, \ + unsigned int count) \ +{ \ + volatile type *__addr = addr; \ + \ + while (count--) { \ + *__addr = in##bwlq(port); \ + __addr++; \ + } \ +} + +__BUILD_IOPORT_STRING(b, u8) +__BUILD_IOPORT_STRING(w, u16) +__BUILD_IOPORT_STRING(l, u32) +__BUILD_IOPORT_STRING(q, u64) + +#endif /* - * This function provides a method for the generic case where a - * board-specific ioport_map simply needs to return the port + some - * arbitrary port base. + * Legacy SuperH on-chip I/O functions * - * We use this at board setup time to implicitly set the port base, and - * as a result, we can use the generic ioport_map. + * These are all deprecated, all new (and especially cross-platform) code + * should be using the __raw_xxx() routines directly. */ -static inline void __set_io_port_base(unsigned long pbase) +static inline u8 __deprecated ctrl_inb(unsigned long addr) { - generic_io_base = pbase; + return __raw_readb(addr); } -#define __ioport_map(p, n) sh_mv.mv_ioport_map((p), (n)) +static inline u16 __deprecated ctrl_inw(unsigned long addr) +{ + return __raw_readw(addr); +} -#endif +static inline u32 __deprecated ctrl_inl(unsigned long addr) +{ + return __raw_readl(addr); +} + +static inline u64 __deprecated ctrl_inq(unsigned long addr) +{ + return __raw_readq(addr); +} + +static inline void __deprecated ctrl_outb(u8 v, unsigned long addr) +{ + __raw_writeb(v, addr); +} + +static inline void __deprecated ctrl_outw(u16 v, unsigned long addr) +{ + __raw_writew(v, addr); +} + +static inline void __deprecated ctrl_outl(u32 v, unsigned long addr) +{ + __raw_writel(v, addr); +} + +static inline void __deprecated ctrl_outq(u64 v, unsigned long addr) +{ + __raw_writeq(v, addr); +} + +#define IO_SPACE_LIMIT 0xffffffff + +/* synco on SH-4A, otherwise a nop */ +#define mmiowb() wmb() /* We really want to try and get these to memcpy etc */ void memcpy_fromio(void *, const volatile void __iomem *, unsigned long); @@ -395,10 +414,6 @@ static inline int iounmap_fixed(void __iomem *addr) { return -EINVAL; } #define ioremap_nocache ioremap #define iounmap __iounmap -#define maybebadio(port) \ - printk(KERN_ERR "bad PC-like io %s:%u for port 0x%lx at 0x%08x\n", \ - __func__, __LINE__, (port), (u32)__builtin_return_address(0)) - /* * Convert a physical pointer to a virtual kernel pointer for /dev/mem * access diff --git a/arch/sh/include/asm/io_generic.h b/arch/sh/include/asm/io_generic.h index 491df93cbf8..b5f6956f19c 100644 --- a/arch/sh/include/asm/io_generic.h +++ b/arch/sh/include/asm/io_generic.h @@ -11,31 +11,6 @@ #error "Don't include this header without a valid system prefix" #endif -u8 IO_CONCAT(__IO_PREFIX,inb)(unsigned long); -u16 IO_CONCAT(__IO_PREFIX,inw)(unsigned long); -u32 IO_CONCAT(__IO_PREFIX,inl)(unsigned long); - -void IO_CONCAT(__IO_PREFIX,outb)(u8, unsigned long); -void IO_CONCAT(__IO_PREFIX,outw)(u16, unsigned long); -void IO_CONCAT(__IO_PREFIX,outl)(u32, unsigned long); - -u8 IO_CONCAT(__IO_PREFIX,inb_p)(unsigned long); -u16 IO_CONCAT(__IO_PREFIX,inw_p)(unsigned long); -u32 IO_CONCAT(__IO_PREFIX,inl_p)(unsigned long); -void IO_CONCAT(__IO_PREFIX,outb_p)(u8, unsigned long); -void IO_CONCAT(__IO_PREFIX,outw_p)(u16, unsigned long); -void IO_CONCAT(__IO_PREFIX,outl_p)(u32, unsigned long); - -void IO_CONCAT(__IO_PREFIX,insb)(unsigned long, void *dst, unsigned long count); -void IO_CONCAT(__IO_PREFIX,insw)(unsigned long, void *dst, unsigned long count); -void IO_CONCAT(__IO_PREFIX,insl)(unsigned long, void *dst, unsigned long count); -void IO_CONCAT(__IO_PREFIX,outsb)(unsigned long, const void *src, unsigned long count); -void IO_CONCAT(__IO_PREFIX,outsw)(unsigned long, const void *src, unsigned long count); -void IO_CONCAT(__IO_PREFIX,outsl)(unsigned long, const void *src, unsigned long count); - -void *IO_CONCAT(__IO_PREFIX,ioremap)(unsigned long offset, unsigned long size); -void IO_CONCAT(__IO_PREFIX,iounmap)(void *addr); - void __iomem *IO_CONCAT(__IO_PREFIX,ioport_map)(unsigned long addr, unsigned int size); void IO_CONCAT(__IO_PREFIX,ioport_unmap)(void __iomem *addr); void IO_CONCAT(__IO_PREFIX,mem_init)(void); diff --git a/arch/sh/include/asm/machvec.h b/arch/sh/include/asm/machvec.h index a0b0cf79cf8..dd5d6e5bf20 100644 --- a/arch/sh/include/asm/machvec.h +++ b/arch/sh/include/asm/machvec.h @@ -23,27 +23,6 @@ struct sh_machine_vector { void (*mv_init_irq)(void); #ifdef CONFIG_HAS_IOPORT - u8 (*mv_inb)(unsigned long); - u16 (*mv_inw)(unsigned long); - u32 (*mv_inl)(unsigned long); - void (*mv_outb)(u8, unsigned long); - void (*mv_outw)(u16, unsigned long); - void (*mv_outl)(u32, unsigned long); - - u8 (*mv_inb_p)(unsigned long); - u16 (*mv_inw_p)(unsigned long); - u32 (*mv_inl_p)(unsigned long); - void (*mv_outb_p)(u8, unsigned long); - void (*mv_outw_p)(u16, unsigned long); - void (*mv_outl_p)(u32, unsigned long); - - void (*mv_insb)(unsigned long, void *dst, unsigned long count); - void (*mv_insw)(unsigned long, void *dst, unsigned long count); - void (*mv_insl)(unsigned long, void *dst, unsigned long count); - void (*mv_outsb)(unsigned long, const void *src, unsigned long count); - void (*mv_outsw)(unsigned long, const void *src, unsigned long count); - void (*mv_outsl)(unsigned long, const void *src, unsigned long count); - void __iomem *(*mv_ioport_map)(unsigned long port, unsigned int size); void (*mv_ioport_unmap)(void __iomem *); #endif diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile index 8eed6a48544..ff80227b02d 100644 --- a/arch/sh/kernel/Makefile +++ b/arch/sh/kernel/Makefile @@ -20,6 +20,11 @@ obj-y := clkdev.o debugtraps.o dma-nommu.o dumpstack.o \ syscalls_$(BITS).o time.o topology.o traps.o \ traps_$(BITS).o unwinder.o +ifndef CONFIG_GENERIC_IOMAP +obj-y += iomap.o +obj-$(CONFIG_HAS_IOPORT) += ioport.o +endif + obj-y += cpu/ obj-$(CONFIG_VSYSCALL) += vsyscall/ obj-$(CONFIG_SMP) += smp.o @@ -39,7 +44,6 @@ obj-$(CONFIG_DUMP_CODE) += disassemble.o obj-$(CONFIG_HIBERNATION) += swsusp.o obj-$(CONFIG_DWARF_UNWINDER) += dwarf.o obj-$(CONFIG_PERF_EVENTS) += perf_event.o perf_callchain.o -obj-$(CONFIG_HAS_IOPORT) += io_generic.o obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) += localtimer.o diff --git a/arch/sh/kernel/io_generic.c b/arch/sh/kernel/io_generic.c deleted file mode 100644 index 447d78f666f..00000000000 --- a/arch/sh/kernel/io_generic.c +++ /dev/null @@ -1,180 +0,0 @@ -/* - * arch/sh/kernel/io_generic.c - * - * Copyright (C) 2000 Niibe Yutaka - * Copyright (C) 2005 - 2007 Paul Mundt - * - * Generic I/O routine. These can be used where a machine specific version - * is not required. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include -#include - -#ifdef CONFIG_CPU_SH3 -/* SH3 has a PCMCIA bug that needs a dummy read from area 6 for a - * workaround. */ -/* I'm not sure SH7709 has this kind of bug */ -#define dummy_read() __raw_readb(0xba000000) -#else -#define dummy_read() -#endif - -unsigned long generic_io_base = 0; - -u8 generic_inb(unsigned long port) -{ - return __raw_readb(__ioport_map(port, 1)); -} - -u16 generic_inw(unsigned long port) -{ - return __raw_readw(__ioport_map(port, 2)); -} - -u32 generic_inl(unsigned long port) -{ - return __raw_readl(__ioport_map(port, 4)); -} - -u8 generic_inb_p(unsigned long port) -{ - unsigned long v = generic_inb(port); - - ctrl_delay(); - return v; -} - -u16 generic_inw_p(unsigned long port) -{ - unsigned long v = generic_inw(port); - - ctrl_delay(); - return v; -} - -u32 generic_inl_p(unsigned long port) -{ - unsigned long v = generic_inl(port); - - ctrl_delay(); - return v; -} - -/* - * insb/w/l all read a series of bytes/words/longs from a fixed port - * address. However as the port address doesn't change we only need to - * convert the port address to real address once. - */ - -void generic_insb(unsigned long port, void *dst, unsigned long count) -{ - __raw_readsb(__ioport_map(port, 1), dst, count); - dummy_read(); -} - -void generic_insw(unsigned long port, void *dst, unsigned long count) -{ - __raw_readsw(__ioport_map(port, 2), dst, count); - dummy_read(); -} - -void generic_insl(unsigned long port, void *dst, unsigned long count) -{ - __raw_readsl(__ioport_map(port, 4), dst, count); - dummy_read(); -} - -void generic_outb(u8 b, unsigned long port) -{ - __raw_writeb(b, __ioport_map(port, 1)); -} - -void generic_outw(u16 b, unsigned long port) -{ - __raw_writew(b, __ioport_map(port, 2)); -} - -void generic_outl(u32 b, unsigned long port) -{ - __raw_writel(b, __ioport_map(port, 4)); -} - -void generic_outb_p(u8 b, unsigned long port) -{ - generic_outb(b, port); - ctrl_delay(); -} - -void generic_outw_p(u16 b, unsigned long port) -{ - generic_outw(b, port); - ctrl_delay(); -} - -void generic_outl_p(u32 b, unsigned long port) -{ - generic_outl(b, port); - ctrl_delay(); -} - -/* - * outsb/w/l all write a series of bytes/words/longs to a fixed port - * address. However as the port address doesn't change we only need to - * convert the port address to real address once. - */ -void generic_outsb(unsigned long port, const void *src, unsigned long count) -{ - __raw_writesb(__ioport_map(port, 1), src, count); - dummy_read(); -} - -void generic_outsw(unsigned long port, const void *src, unsigned long count) -{ - __raw_writesw(__ioport_map(port, 2), src, count); - dummy_read(); -} - -void generic_outsl(unsigned long port, const void *src, unsigned long count) -{ - __raw_writesl(__ioport_map(port, 4), src, count); - dummy_read(); -} - -void __iomem *generic_ioport_map(unsigned long addr, unsigned int size) -{ -#ifdef P1SEG - if (PXSEG(addr) >= P1SEG) - return (void __iomem *)addr; -#endif - - return (void __iomem *)(addr + generic_io_base); -} - -void generic_ioport_unmap(void __iomem *addr) -{ -} - -#ifndef CONFIG_GENERIC_IOMAP -void __iomem *ioport_map(unsigned long port, unsigned int nr) -{ - void __iomem *ret; - - ret = __ioport_map_trapped(port, nr); - if (ret) - return ret; - - return __ioport_map(port, nr); -} -EXPORT_SYMBOL(ioport_map); - -void ioport_unmap(void __iomem *addr) -{ - sh_mv.mv_ioport_unmap(addr); -} -EXPORT_SYMBOL(ioport_unmap); -#endif /* CONFIG_GENERIC_IOMAP */ diff --git a/arch/sh/kernel/iomap.c b/arch/sh/kernel/iomap.c new file mode 100644 index 00000000000..2e8e8b9b9ce --- /dev/null +++ b/arch/sh/kernel/iomap.c @@ -0,0 +1,165 @@ +/* + * arch/sh/kernel/iomap.c + * + * Copyright (C) 2000 Niibe Yutaka + * Copyright (C) 2005 - 2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include + +unsigned int ioread8(void __iomem *addr) +{ + return readb(addr); +} +EXPORT_SYMBOL(ioread8); + +unsigned int ioread16(void __iomem *addr) +{ + return readw(addr); +} +EXPORT_SYMBOL(ioread16); + +unsigned int ioread16be(void __iomem *addr) +{ + return be16_to_cpu(__raw_readw(addr)); +} +EXPORT_SYMBOL(ioread16be); + +unsigned int ioread32(void __iomem *addr) +{ + return readl(addr); +} +EXPORT_SYMBOL(ioread32); + +unsigned int ioread32be(void __iomem *addr) +{ + return be32_to_cpu(__raw_readl(addr)); +} +EXPORT_SYMBOL(ioread32be); + +void iowrite8(u8 val, void __iomem *addr) +{ + writeb(val, addr); +} +EXPORT_SYMBOL(iowrite8); + +void iowrite16(u16 val, void __iomem *addr) +{ + writew(val, addr); +} +EXPORT_SYMBOL(iowrite16); + +void iowrite16be(u16 val, void __iomem *addr) +{ + __raw_writew(cpu_to_be16(val), addr); +} +EXPORT_SYMBOL(iowrite16be); + +void iowrite32(u32 val, void __iomem *addr) +{ + writel(val, addr); +} +EXPORT_SYMBOL(iowrite32); + +void iowrite32be(u32 val, void __iomem *addr) +{ + __raw_writel(cpu_to_be32(val), addr); +} +EXPORT_SYMBOL(iowrite32be); + +/* + * These are the "repeat MMIO read/write" functions. + * Note the "__raw" accesses, since we don't want to + * convert to CPU byte order. We write in "IO byte + * order" (we also don't have IO barriers). + */ +static inline void mmio_insb(void __iomem *addr, u8 *dst, int count) +{ + while (--count >= 0) { + u8 data = __raw_readb(addr); + *dst = data; + dst++; + } +} + +static inline void mmio_insw(void __iomem *addr, u16 *dst, int count) +{ + while (--count >= 0) { + u16 data = __raw_readw(addr); + *dst = data; + dst++; + } +} + +static inline void mmio_insl(void __iomem *addr, u32 *dst, int count) +{ + while (--count >= 0) { + u32 data = __raw_readl(addr); + *dst = data; + dst++; + } +} + +static inline void mmio_outsb(void __iomem *addr, const u8 *src, int count) +{ + while (--count >= 0) { + __raw_writeb(*src, addr); + src++; + } +} + +static inline void mmio_outsw(void __iomem *addr, const u16 *src, int count) +{ + while (--count >= 0) { + __raw_writew(*src, addr); + src++; + } +} + +static inline void mmio_outsl(void __iomem *addr, const u32 *src, int count) +{ + while (--count >= 0) { + __raw_writel(*src, addr); + src++; + } +} + +void ioread8_rep(void __iomem *addr, void *dst, unsigned long count) +{ + mmio_insb(addr, dst, count); +} +EXPORT_SYMBOL(ioread8_rep); + +void ioread16_rep(void __iomem *addr, void *dst, unsigned long count) +{ + mmio_insw(addr, dst, count); +} +EXPORT_SYMBOL(ioread16_rep); + +void ioread32_rep(void __iomem *addr, void *dst, unsigned long count) +{ + mmio_insl(addr, dst, count); +} +EXPORT_SYMBOL(ioread32_rep); + +void iowrite8_rep(void __iomem *addr, const void *src, unsigned long count) +{ + mmio_outsb(addr, src, count); +} +EXPORT_SYMBOL(iowrite8_rep); + +void iowrite16_rep(void __iomem *addr, const void *src, unsigned long count) +{ + mmio_outsw(addr, src, count); +} +EXPORT_SYMBOL(iowrite16_rep); + +void iowrite32_rep(void __iomem *addr, const void *src, unsigned long count) +{ + mmio_outsl(addr, src, count); +} +EXPORT_SYMBOL(iowrite32_rep); diff --git a/arch/sh/kernel/ioport.c b/arch/sh/kernel/ioport.c new file mode 100644 index 00000000000..e3ad6103e7c --- /dev/null +++ b/arch/sh/kernel/ioport.c @@ -0,0 +1,43 @@ +/* + * arch/sh/kernel/ioport.c + * + * Copyright (C) 2000 Niibe Yutaka + * Copyright (C) 2005 - 2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include + +const unsigned long sh_io_port_base __read_mostly = -1; +EXPORT_SYMBOL(sh_io_port_base); + +void __iomem *__ioport_map(unsigned long addr, unsigned int size) +{ + if (sh_mv.mv_ioport_map) + return sh_mv.mv_ioport_map(addr, size); + + return (void __iomem *)(addr + sh_io_port_base); +} +EXPORT_SYMBOL(__ioport_map); + +void __iomem *ioport_map(unsigned long port, unsigned int nr) +{ + void __iomem *ret; + + ret = __ioport_map_trapped(port, nr); + if (ret) + return ret; + + return __ioport_map(port, nr); +} +EXPORT_SYMBOL(ioport_map); + +void ioport_unmap(void __iomem *addr) +{ + if (sh_mv.mv_ioport_unmap) + sh_mv.mv_ioport_unmap(addr); +} +EXPORT_SYMBOL(ioport_unmap); diff --git a/arch/sh/kernel/machvec.c b/arch/sh/kernel/machvec.c index 9f9bb63616a..3d722e49db0 100644 --- a/arch/sh/kernel/machvec.c +++ b/arch/sh/kernel/machvec.c @@ -118,28 +118,6 @@ void __init sh_mv_setup(void) sh_mv.mv_##elem = generic_##elem; \ } while (0) -#ifdef CONFIG_HAS_IOPORT - -#ifdef P2SEG - __set_io_port_base(P2SEG); -#else - __set_io_port_base(0); -#endif - - mv_set(inb); mv_set(inw); mv_set(inl); - mv_set(outb); mv_set(outw); mv_set(outl); - - mv_set(inb_p); mv_set(inw_p); mv_set(inl_p); - mv_set(outb_p); mv_set(outw_p); mv_set(outl_p); - - mv_set(insb); mv_set(insw); mv_set(insl); - mv_set(outsb); mv_set(outsw); mv_set(outsl); - - mv_set(ioport_map); - mv_set(ioport_unmap); - -#endif - mv_set(irq_demux); mv_set(mode_pins); mv_set(mem_init); -- cgit v1.2.3-18-g5258 From 8b32a92b600e2728c5c438a748a4dc3132c98ef3 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 1 Nov 2010 17:05:30 -0400 Subject: sh: Add EHCI support for SH7786. This adds in the platform device for SH7786 USB EHCI. Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4a/setup-sh7786.c | 35 ++++++++++++++++++++++++++++++---- 1 file changed, 31 insertions(+), 4 deletions(-) (limited to 'arch/sh') diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c index c016c000471..0170dbda1d0 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c @@ -522,10 +522,37 @@ static struct platform_device dma0_device = { }, }; +#define USB_EHCI_START 0xffe70000 +#define USB_OHCI_START 0xffe70400 + +static struct resource usb_ehci_resources[] = { + [0] = { + .start = USB_EHCI_START, + .end = USB_EHCI_START + 0x3ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 77, + .end = 77, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usb_ehci_device = { + .name = "sh_ehci", + .id = -1, + .dev = { + .dma_mask = &usb_ehci_device.dev.coherent_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(usb_ehci_resources), + .resource = usb_ehci_resources, +}; + static struct resource usb_ohci_resources[] = { [0] = { - .start = 0xffe70400, - .end = 0xffe704ff, + .start = USB_OHCI_START, + .end = USB_OHCI_START + 0x3ff, .flags = IORESOURCE_MEM, }, [1] = { @@ -535,12 +562,11 @@ static struct resource usb_ohci_resources[] = { }, }; -static u64 usb_ohci_dma_mask = DMA_BIT_MASK(32); static struct platform_device usb_ohci_device = { .name = "sh_ohci", .id = -1, .dev = { - .dma_mask = &usb_ohci_dma_mask, + .dma_mask = &usb_ohci_device.dev.coherent_dma_mask, .coherent_dma_mask = DMA_BIT_MASK(32), }, .num_resources = ARRAY_SIZE(usb_ohci_resources), @@ -570,6 +596,7 @@ static struct platform_device *sh7786_early_devices[] __initdata = { static struct platform_device *sh7786_devices[] __initdata = { &dma0_device, + &usb_ehci_device, &usb_ohci_device, }; -- cgit v1.2.3-18-g5258 From 16b259203c513ed28bd31cc9a981e0d3ad517943 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 1 Nov 2010 12:18:48 -0400 Subject: sh: migrate SH_CLK_MD to mode pin API. This kills off the hardcoded SH_CLK_MD introduced by the SH-2 boards and converts over to the mode pin API. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 9 --------- arch/sh/boards/mach-se/7206/setup.c | 6 ++++++ arch/sh/boards/mach-se/board-se7619.c | 6 ++++++ arch/sh/kernel/cpu/sh2/clock-sh7619.c | 22 ++++++++++++---------- arch/sh/kernel/cpu/sh2a/clock-sh7201.c | 20 ++++++++++---------- arch/sh/kernel/cpu/sh2a/clock-sh7203.c | 21 +++++++++------------ arch/sh/kernel/cpu/sh2a/clock-sh7206.c | 20 +++++++++----------- 7 files changed, 52 insertions(+), 52 deletions(-) (limited to 'arch/sh') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 7f217b3a50a..2fe8812f78d 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -567,15 +567,6 @@ config SH_CLK_CPG_LEGACY def_bool y if !CPU_SUBTYPE_SH7785 && !ARCH_SHMOBILE && \ !CPU_SHX3 && !CPU_SUBTYPE_SH7757 -config SH_CLK_MD - int "CPU Mode Pin Setting" - depends on CPU_SH2 - default 6 if CPU_SUBTYPE_SH7206 - default 5 if CPU_SUBTYPE_SH7619 - default 0 - help - MD2 - MD0 pin setting. - source "kernel/time/Kconfig" endmenu diff --git a/arch/sh/boards/mach-se/7206/setup.c b/arch/sh/boards/mach-se/7206/setup.c index 7f4871c71a0..33039e0dc56 100644 --- a/arch/sh/boards/mach-se/7206/setup.c +++ b/arch/sh/boards/mach-se/7206/setup.c @@ -79,6 +79,11 @@ static int __init se7206_devices_setup(void) } __initcall(se7206_devices_setup); +static int se7206_mode_pins(void) +{ + return MODE_PIN1 | MODE_PIN2; +} + /* * The Machine Vector */ @@ -87,4 +92,5 @@ static struct sh_machine_vector mv_se __initmv = { .mv_name = "SolutionEngine", .mv_nr_irqs = 256, .mv_init_irq = init_se7206_IRQ, + .mv_mode_pins = se7206_mode_pins, }; diff --git a/arch/sh/boards/mach-se/board-se7619.c b/arch/sh/boards/mach-se/board-se7619.c index 1d0ef7faa10..82b6d4a5dc0 100644 --- a/arch/sh/boards/mach-se/board-se7619.c +++ b/arch/sh/boards/mach-se/board-se7619.c @@ -11,6 +11,11 @@ #include #include +static int se7619_mode_pins(void) +{ + return MODE_PIN2 | MODE_PIN0; +} + /* * The Machine Vector */ @@ -18,4 +23,5 @@ static struct sh_machine_vector mv_se __initmv = { .mv_name = "SolutionEngine", .mv_nr_irqs = 108, + .mv_mode_pins = se7619_mode_pins, }; diff --git a/arch/sh/kernel/cpu/sh2/clock-sh7619.c b/arch/sh/kernel/cpu/sh2/clock-sh7619.c index 0c9f24d7a02..5b7f12e58a8 100644 --- a/arch/sh/kernel/cpu/sh2/clock-sh7619.c +++ b/arch/sh/kernel/cpu/sh2/clock-sh7619.c @@ -14,24 +14,18 @@ */ #include #include +#include #include #include -#include +#include static const int pll1rate[] = {1,2}; static const int pfc_divisors[] = {1,2,0,4}; - -#if (CONFIG_SH_CLK_MD == 1) || (CONFIG_SH_CLK_MD == 2) -#define PLL2 (4) -#elif (CONFIG_SH_CLK_MD == 5) || (CONFIG_SH_CLK_MD == 6) -#define PLL2 (2) -#else -#error "Illigal Clock Mode!" -#endif +static unsigned int pll2_mult; static void master_clk_init(struct clk *clk) { - clk->rate *= PLL2 * pll1rate[(__raw_readw(FREQCR) >> 8) & 7]; + clk->rate *= pll2_mult * pll1rate[(__raw_readw(FREQCR) >> 8) & 7]; } static struct clk_ops sh7619_master_clk_ops = { @@ -70,6 +64,14 @@ static struct clk_ops *sh7619_clk_ops[] = { void __init arch_init_clk_ops(struct clk_ops **ops, int idx) { + if (test_mode_pin(MODE_PIN2 | MODE_PIN0) || + test_mode_pin(MODE_PIN2 | MODE_PIN1)) + pll2_mult = 2; + else if (test_mode_pin(MODE_PIN0) || test_mode_pin(MODE_PIN1)) + pll2_mult = 4; + + BUG_ON(!pll2_mult); + if (idx < ARRAY_SIZE(sh7619_clk_ops)) *ops = sh7619_clk_ops[idx]; } diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7201.c b/arch/sh/kernel/cpu/sh2a/clock-sh7201.c index b26264dc2ae..1174e2d96c0 100644 --- a/arch/sh/kernel/cpu/sh2a/clock-sh7201.c +++ b/arch/sh/kernel/cpu/sh2a/clock-sh7201.c @@ -22,19 +22,12 @@ static const int pll1rate[]={1,2,3,4,6,8}; static const int pfc_divisors[]={1,2,3,4,6,8,12}; #define ifc_divisors pfc_divisors -#if (CONFIG_SH_CLK_MD == 0) -#define PLL2 (4) -#elif (CONFIG_SH_CLK_MD == 2) -#define PLL2 (2) -#elif (CONFIG_SH_CLK_MD == 3) -#define PLL2 (1) -#else -#error "Illegal Clock Mode!" -#endif +static unsigned int pll2_mult; static void master_clk_init(struct clk *clk) { - return 10000000 * PLL2 * pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007]; + clk->rate = 10000000 * pll2_mult * + pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007]; } static struct clk_ops sh7201_master_clk_ops = { @@ -80,6 +73,13 @@ static struct clk_ops *sh7201_clk_ops[] = { void __init arch_init_clk_ops(struct clk_ops **ops, int idx) { + if (test_mode_pin(MODE_PIN1 | MODE_PIN0)) + pll2_mult = 1; + else if (test_mode_pin(MODE_PIN1)) + pll2_mult = 2; + else + pll2_mult = 4; + if (idx < ARRAY_SIZE(sh7201_clk_ops)) *ops = sh7201_clk_ops[idx]; } diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7203.c b/arch/sh/kernel/cpu/sh2a/clock-sh7203.c index 7e75d8f7950..95a008e8b73 100644 --- a/arch/sh/kernel/cpu/sh2a/clock-sh7203.c +++ b/arch/sh/kernel/cpu/sh2a/clock-sh7203.c @@ -25,21 +25,11 @@ static const int pll1rate[]={8,12,16,0}; static const int pfc_divisors[]={1,2,3,4,6,8,12}; #define ifc_divisors pfc_divisors -#if (CONFIG_SH_CLK_MD == 0) -#define PLL2 (1) -#elif (CONFIG_SH_CLK_MD == 1) -#define PLL2 (2) -#elif (CONFIG_SH_CLK_MD == 2) -#define PLL2 (4) -#elif (CONFIG_SH_CLK_MD == 3) -#define PLL2 (4) -#else -#error "Illegal Clock Mode!" -#endif +static unsigned int pll2_mult; static void master_clk_init(struct clk *clk) { - clk->rate *= pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0003] * PLL2 ; + clk->rate *= pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0003] * pll2_mult; } static struct clk_ops sh7203_master_clk_ops = { @@ -79,6 +69,13 @@ static struct clk_ops *sh7203_clk_ops[] = { void __init arch_init_clk_ops(struct clk_ops **ops, int idx) { + if (test_mode_pin(MODE_PIN1)) + pll2_mult = 4; + else if (test_mode_pin(MODE_PIN0)) + pll2_mult = 2; + else + pll2_mult = 1; + if (idx < ARRAY_SIZE(sh7203_clk_ops)) *ops = sh7203_clk_ops[idx]; } diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7206.c b/arch/sh/kernel/cpu/sh2a/clock-sh7206.c index b27a5e2687a..3c314d7cd6e 100644 --- a/arch/sh/kernel/cpu/sh2a/clock-sh7206.c +++ b/arch/sh/kernel/cpu/sh2a/clock-sh7206.c @@ -22,19 +22,11 @@ static const int pll1rate[]={1,2,3,4,6,8}; static const int pfc_divisors[]={1,2,3,4,6,8,12}; #define ifc_divisors pfc_divisors -#if (CONFIG_SH_CLK_MD == 2) -#define PLL2 (4) -#elif (CONFIG_SH_CLK_MD == 6) -#define PLL2 (2) -#elif (CONFIG_SH_CLK_MD == 7) -#define PLL2 (1) -#else -#error "Illigal Clock Mode!" -#endif +static unsigned int pll2_mult; static void master_clk_init(struct clk *clk) { - clk->rate *= PLL2 * pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007]; + clk->rate *= pll2_mult * pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007]; } static struct clk_ops sh7206_master_clk_ops = { @@ -79,7 +71,13 @@ static struct clk_ops *sh7206_clk_ops[] = { void __init arch_init_clk_ops(struct clk_ops **ops, int idx) { + if (test_mode_pin(MODE_PIN2 | MODE_PIN1 | MODE_PIN0)) + pll2_mult = 1; + else if (test_mode_pin(MODE_PIN2 | MODE_PIN1)) + pll2_mult = 2; + else if (test_mode_pin(MODE_PIN1)) + pll2_mult = 4; + if (idx < ARRAY_SIZE(sh7206_clk_ops)) *ops = sh7206_clk_ops[idx]; } - -- cgit v1.2.3-18-g5258 From f020c92de48246510623162fb22d60d91810cc56 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 1 Nov 2010 12:24:48 -0400 Subject: sh: Enable optional gpiolib for all CPUs with pinmux tables. All of the CPUs with pinmux tables support gpiolib. At present the boards that depend on it for initialization manually select gpiolib as needed, but there is no reason why it can't be exposed generically to the user regardless. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/sh') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 2fe8812f78d..3b572fe1c04 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -274,6 +274,7 @@ config CPU_SUBTYPE_SH7203 select CPU_HAS_FPU select SYS_SUPPORTS_CMT select SYS_SUPPORTS_MTU2 + select ARCH_WANT_OPTIONAL_GPIOLIB config CPU_SUBTYPE_SH7206 bool "Support SH7206 processor" @@ -345,6 +346,7 @@ config CPU_SUBTYPE_SH7720 select CPU_SH3 select CPU_HAS_DSP select SYS_SUPPORTS_CMT + select ARCH_WANT_OPTIONAL_GPIOLIB help Select SH7720 if you have a SH3-DSP SH7720 CPU. @@ -407,6 +409,7 @@ config CPU_SUBTYPE_SH7723 select ARCH_SHMOBILE select ARCH_SPARSEMEM_ENABLE select SYS_SUPPORTS_CMT + select ARCH_WANT_OPTIONAL_GPIOLIB help Select SH7723 if you have an SH-MobileR2 CPU. @@ -417,6 +420,7 @@ config CPU_SUBTYPE_SH7724 select ARCH_SHMOBILE select ARCH_SPARSEMEM_ENABLE select SYS_SUPPORTS_CMT + select ARCH_WANT_OPTIONAL_GPIOLIB help Select SH7724 if you have an SH-MobileR2R CPU. @@ -424,6 +428,7 @@ config CPU_SUBTYPE_SH7757 bool "Support SH7757 processor" select CPU_SH4A select CPU_SHX2 + select ARCH_WANT_OPTIONAL_GPIOLIB help Select SH7757 if you have a SH4A SH7757 CPU. @@ -447,6 +452,7 @@ config CPU_SUBTYPE_SH7785 select CPU_SHX2 select ARCH_SPARSEMEM_ENABLE select SYS_SUPPORTS_NUMA + select ARCH_WANT_OPTIONAL_GPIOLIB config CPU_SUBTYPE_SH7786 bool "Support SH7786 processor" @@ -454,6 +460,7 @@ config CPU_SUBTYPE_SH7786 select CPU_SHX3 select CPU_HAS_PTEAEX select GENERIC_CLOCKEVENTS_BROADCAST if SMP + select ARCH_WANT_OPTIONAL_GPIOLIB config CPU_SUBTYPE_SHX3 bool "Support SH-X3 processor" @@ -478,6 +485,7 @@ config CPU_SUBTYPE_SH7722 select ARCH_SPARSEMEM_ENABLE select SYS_SUPPORTS_NUMA select SYS_SUPPORTS_CMT + select ARCH_WANT_OPTIONAL_GPIOLIB config CPU_SUBTYPE_SH7366 bool "Support SH7366 processor" -- cgit v1.2.3-18-g5258 From a9b27bcc6acf2491609f51aa592ec67311d4518d Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 1 Nov 2010 12:44:25 -0400 Subject: sh: Break out cpuinfo_op procfs bits. Presently this is all inlined in setup.c, which is not really the place for it. Follow the x86 example and split it out into its own file. Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/Makefile | 2 +- arch/sh/kernel/cpu/proc.c | 148 ++++++++++++++++++++++++++++++++++++++++++++ arch/sh/kernel/setup.c | 144 ------------------------------------------ 3 files changed, 149 insertions(+), 145 deletions(-) create mode 100644 arch/sh/kernel/cpu/proc.c (limited to 'arch/sh') diff --git a/arch/sh/kernel/cpu/Makefile b/arch/sh/kernel/cpu/Makefile index 4edcb60a135..d49c2135fd4 100644 --- a/arch/sh/kernel/cpu/Makefile +++ b/arch/sh/kernel/cpu/Makefile @@ -20,4 +20,4 @@ obj-$(CONFIG_SH_CLK_CPG_LEGACY) += clock-cpg.o obj-$(CONFIG_SH_FPU) += fpu.o obj-$(CONFIG_SH_FPU_EMU) += fpu.o -obj-y += irq/ init.o clock.o hwblk.o +obj-y += irq/ init.o clock.o hwblk.o proc.o diff --git a/arch/sh/kernel/cpu/proc.c b/arch/sh/kernel/cpu/proc.c new file mode 100644 index 00000000000..e80a936f409 --- /dev/null +++ b/arch/sh/kernel/cpu/proc.c @@ -0,0 +1,148 @@ +#include +#include +#include +#include +#include + +static const char *cpu_name[] = { + [CPU_SH7201] = "SH7201", + [CPU_SH7203] = "SH7203", [CPU_SH7263] = "SH7263", + [CPU_SH7206] = "SH7206", [CPU_SH7619] = "SH7619", + [CPU_SH7705] = "SH7705", [CPU_SH7706] = "SH7706", + [CPU_SH7707] = "SH7707", [CPU_SH7708] = "SH7708", + [CPU_SH7709] = "SH7709", [CPU_SH7710] = "SH7710", + [CPU_SH7712] = "SH7712", [CPU_SH7720] = "SH7720", + [CPU_SH7721] = "SH7721", [CPU_SH7729] = "SH7729", + [CPU_SH7750] = "SH7750", [CPU_SH7750S] = "SH7750S", + [CPU_SH7750R] = "SH7750R", [CPU_SH7751] = "SH7751", + [CPU_SH7751R] = "SH7751R", [CPU_SH7760] = "SH7760", + [CPU_SH4_202] = "SH4-202", [CPU_SH4_501] = "SH4-501", + [CPU_SH7763] = "SH7763", [CPU_SH7770] = "SH7770", + [CPU_SH7780] = "SH7780", [CPU_SH7781] = "SH7781", + [CPU_SH7343] = "SH7343", [CPU_SH7785] = "SH7785", + [CPU_SH7786] = "SH7786", [CPU_SH7757] = "SH7757", + [CPU_SH7722] = "SH7722", [CPU_SHX3] = "SH-X3", + [CPU_SH5_101] = "SH5-101", [CPU_SH5_103] = "SH5-103", + [CPU_MXG] = "MX-G", [CPU_SH7723] = "SH7723", + [CPU_SH7366] = "SH7366", [CPU_SH7724] = "SH7724", + [CPU_SH_NONE] = "Unknown" +}; + +const char *get_cpu_subtype(struct sh_cpuinfo *c) +{ + return cpu_name[c->type]; +} +EXPORT_SYMBOL(get_cpu_subtype); + +#ifdef CONFIG_PROC_FS +/* Symbolic CPU flags, keep in sync with asm/cpu-features.h */ +static const char *cpu_flags[] = { + "none", "fpu", "p2flush", "mmuassoc", "dsp", "perfctr", + "ptea", "llsc", "l2", "op32", "pteaex", NULL +}; + +static void show_cpuflags(struct seq_file *m, struct sh_cpuinfo *c) +{ + unsigned long i; + + seq_printf(m, "cpu flags\t:"); + + if (!c->flags) { + seq_printf(m, " %s\n", cpu_flags[0]); + return; + } + + for (i = 0; cpu_flags[i]; i++) + if ((c->flags & (1 << i))) + seq_printf(m, " %s", cpu_flags[i+1]); + + seq_printf(m, "\n"); +} + +static void show_cacheinfo(struct seq_file *m, const char *type, + struct cache_info info) +{ + unsigned int cache_size; + + cache_size = info.ways * info.sets * info.linesz; + + seq_printf(m, "%s size\t: %2dKiB (%d-way)\n", + type, cache_size >> 10, info.ways); +} + +/* + * Get CPU information for use by the procfs. + */ +static int show_cpuinfo(struct seq_file *m, void *v) +{ + struct sh_cpuinfo *c = v; + unsigned int cpu = c - cpu_data; + + if (!cpu_online(cpu)) + return 0; + + if (cpu == 0) + seq_printf(m, "machine\t\t: %s\n", get_system_type()); + else + seq_printf(m, "\n"); + + seq_printf(m, "processor\t: %d\n", cpu); + seq_printf(m, "cpu family\t: %s\n", init_utsname()->machine); + seq_printf(m, "cpu type\t: %s\n", get_cpu_subtype(c)); + if (c->cut_major == -1) + seq_printf(m, "cut\t\t: unknown\n"); + else if (c->cut_minor == -1) + seq_printf(m, "cut\t\t: %d.x\n", c->cut_major); + else + seq_printf(m, "cut\t\t: %d.%d\n", c->cut_major, c->cut_minor); + + show_cpuflags(m, c); + + seq_printf(m, "cache type\t: "); + + /* + * Check for what type of cache we have, we support both the + * unified cache on the SH-2 and SH-3, as well as the harvard + * style cache on the SH-4. + */ + if (c->icache.flags & SH_CACHE_COMBINED) { + seq_printf(m, "unified\n"); + show_cacheinfo(m, "cache", c->icache); + } else { + seq_printf(m, "split (harvard)\n"); + show_cacheinfo(m, "icache", c->icache); + show_cacheinfo(m, "dcache", c->dcache); + } + + /* Optional secondary cache */ + if (c->flags & CPU_HAS_L2_CACHE) + show_cacheinfo(m, "scache", c->scache); + + seq_printf(m, "address sizes\t: %u bits physical\n", c->phys_bits); + + seq_printf(m, "bogomips\t: %lu.%02lu\n", + c->loops_per_jiffy/(500000/HZ), + (c->loops_per_jiffy/(5000/HZ)) % 100); + + return 0; +} + +static void *c_start(struct seq_file *m, loff_t *pos) +{ + return *pos < NR_CPUS ? cpu_data + *pos : NULL; +} +static void *c_next(struct seq_file *m, void *v, loff_t *pos) +{ + ++*pos; + return c_start(m, pos); +} +static void c_stop(struct seq_file *m, void *v) +{ +} +const struct seq_operations cpuinfo_op = { + .start = c_start, + .next = c_next, + .stop = c_stop, + .show = show_cpuinfo, +}; +#endif /* CONFIG_PROC_FS */ diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index d6b018c7ebd..4f267160c51 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -12,7 +12,6 @@ #include #include #include -#include #include #include #include @@ -319,146 +318,3 @@ int test_mode_pin(int pin) { return sh_mv.mv_mode_pins() & pin; } - -static const char *cpu_name[] = { - [CPU_SH7201] = "SH7201", - [CPU_SH7203] = "SH7203", [CPU_SH7263] = "SH7263", - [CPU_SH7206] = "SH7206", [CPU_SH7619] = "SH7619", - [CPU_SH7705] = "SH7705", [CPU_SH7706] = "SH7706", - [CPU_SH7707] = "SH7707", [CPU_SH7708] = "SH7708", - [CPU_SH7709] = "SH7709", [CPU_SH7710] = "SH7710", - [CPU_SH7712] = "SH7712", [CPU_SH7720] = "SH7720", - [CPU_SH7721] = "SH7721", [CPU_SH7729] = "SH7729", - [CPU_SH7750] = "SH7750", [CPU_SH7750S] = "SH7750S", - [CPU_SH7750R] = "SH7750R", [CPU_SH7751] = "SH7751", - [CPU_SH7751R] = "SH7751R", [CPU_SH7760] = "SH7760", - [CPU_SH4_202] = "SH4-202", [CPU_SH4_501] = "SH4-501", - [CPU_SH7763] = "SH7763", [CPU_SH7770] = "SH7770", - [CPU_SH7780] = "SH7780", [CPU_SH7781] = "SH7781", - [CPU_SH7343] = "SH7343", [CPU_SH7785] = "SH7785", - [CPU_SH7786] = "SH7786", [CPU_SH7757] = "SH7757", - [CPU_SH7722] = "SH7722", [CPU_SHX3] = "SH-X3", - [CPU_SH5_101] = "SH5-101", [CPU_SH5_103] = "SH5-103", - [CPU_MXG] = "MX-G", [CPU_SH7723] = "SH7723", - [CPU_SH7366] = "SH7366", [CPU_SH7724] = "SH7724", - [CPU_SH_NONE] = "Unknown" -}; - -const char *get_cpu_subtype(struct sh_cpuinfo *c) -{ - return cpu_name[c->type]; -} -EXPORT_SYMBOL(get_cpu_subtype); - -#ifdef CONFIG_PROC_FS -/* Symbolic CPU flags, keep in sync with asm/cpu-features.h */ -static const char *cpu_flags[] = { - "none", "fpu", "p2flush", "mmuassoc", "dsp", "perfctr", - "ptea", "llsc", "l2", "op32", "pteaex", NULL -}; - -static void show_cpuflags(struct seq_file *m, struct sh_cpuinfo *c) -{ - unsigned long i; - - seq_printf(m, "cpu flags\t:"); - - if (!c->flags) { - seq_printf(m, " %s\n", cpu_flags[0]); - return; - } - - for (i = 0; cpu_flags[i]; i++) - if ((c->flags & (1 << i))) - seq_printf(m, " %s", cpu_flags[i+1]); - - seq_printf(m, "\n"); -} - -static void show_cacheinfo(struct seq_file *m, const char *type, - struct cache_info info) -{ - unsigned int cache_size; - - cache_size = info.ways * info.sets * info.linesz; - - seq_printf(m, "%s size\t: %2dKiB (%d-way)\n", - type, cache_size >> 10, info.ways); -} - -/* - * Get CPU information for use by the procfs. - */ -static int show_cpuinfo(struct seq_file *m, void *v) -{ - struct sh_cpuinfo *c = v; - unsigned int cpu = c - cpu_data; - - if (!cpu_online(cpu)) - return 0; - - if (cpu == 0) - seq_printf(m, "machine\t\t: %s\n", get_system_type()); - else - seq_printf(m, "\n"); - - seq_printf(m, "processor\t: %d\n", cpu); - seq_printf(m, "cpu family\t: %s\n", init_utsname()->machine); - seq_printf(m, "cpu type\t: %s\n", get_cpu_subtype(c)); - if (c->cut_major == -1) - seq_printf(m, "cut\t\t: unknown\n"); - else if (c->cut_minor == -1) - seq_printf(m, "cut\t\t: %d.x\n", c->cut_major); - else - seq_printf(m, "cut\t\t: %d.%d\n", c->cut_major, c->cut_minor); - - show_cpuflags(m, c); - - seq_printf(m, "cache type\t: "); - - /* - * Check for what type of cache we have, we support both the - * unified cache on the SH-2 and SH-3, as well as the harvard - * style cache on the SH-4. - */ - if (c->icache.flags & SH_CACHE_COMBINED) { - seq_printf(m, "unified\n"); - show_cacheinfo(m, "cache", c->icache); - } else { - seq_printf(m, "split (harvard)\n"); - show_cacheinfo(m, "icache", c->icache); - show_cacheinfo(m, "dcache", c->dcache); - } - - /* Optional secondary cache */ - if (c->flags & CPU_HAS_L2_CACHE) - show_cacheinfo(m, "scache", c->scache); - - seq_printf(m, "address sizes\t: %u bits physical\n", c->phys_bits); - - seq_printf(m, "bogomips\t: %lu.%02lu\n", - c->loops_per_jiffy/(500000/HZ), - (c->loops_per_jiffy/(5000/HZ)) % 100); - - return 0; -} - -static void *c_start(struct seq_file *m, loff_t *pos) -{ - return *pos < NR_CPUS ? cpu_data + *pos : NULL; -} -static void *c_next(struct seq_file *m, void *v, loff_t *pos) -{ - ++*pos; - return c_start(m, pos); -} -static void c_stop(struct seq_file *m, void *v) -{ -} -const struct seq_operations cpuinfo_op = { - .start = c_start, - .next = c_next, - .stop = c_stop, - .show = show_cpuinfo, -}; -#endif /* CONFIG_PROC_FS */ -- cgit v1.2.3-18-g5258 From 6d803ba736abb5e122dede70a4720e4843dd6df4 Mon Sep 17 00:00:00 2001 From: Jean-Christop PLAGNIOL-VILLARD Date: Wed, 17 Nov 2010 10:04:33 +0100 Subject: ARM: 6483/1: arm & sh: factorised duplicated clkdev.c factorise some generic infrastructure to assist looking up struct clks for the ARM & SH architecture. as the code is identical at 99% put the arch specific code for allocation as example in asm/clkdev.h Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Paul Mundt Signed-off-by: Russell King --- arch/sh/Kconfig | 2 +- arch/sh/boards/mach-highlander/setup.c | 2 +- arch/sh/include/asm/clkdev.h | 38 ++++---- arch/sh/kernel/Makefile | 2 +- arch/sh/kernel/clkdev.c | 171 --------------------------------- arch/sh/kernel/cpu/clock-cpg.c | 2 +- arch/sh/kernel/cpu/clock.c | 16 --- arch/sh/kernel/cpu/sh4/clock-sh4-202.c | 2 +- arch/sh/kernel/cpu/sh4a/clock-sh7343.c | 2 +- arch/sh/kernel/cpu/sh4a/clock-sh7366.c | 2 +- arch/sh/kernel/cpu/sh4a/clock-sh7722.c | 2 +- arch/sh/kernel/cpu/sh4a/clock-sh7723.c | 2 +- arch/sh/kernel/cpu/sh4a/clock-sh7724.c | 2 +- arch/sh/kernel/cpu/sh4a/clock-sh7757.c | 2 +- arch/sh/kernel/cpu/sh4a/clock-sh7763.c | 2 +- arch/sh/kernel/cpu/sh4a/clock-sh7780.c | 2 +- arch/sh/kernel/cpu/sh4a/clock-sh7785.c | 2 +- arch/sh/kernel/cpu/sh4a/clock-sh7786.c | 2 +- arch/sh/kernel/cpu/sh4a/clock-shx3.c | 2 +- 19 files changed, 33 insertions(+), 224 deletions(-) delete mode 100644 arch/sh/kernel/clkdev.c (limited to 'arch/sh') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 5c075f562eb..cfc51060803 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -1,7 +1,7 @@ config SUPERH def_bool y select EMBEDDED - select HAVE_CLK + select CLKDEV_LOOKUP select HAVE_IDE if HAS_IOPORT select HAVE_MEMBLOCK select HAVE_OPROFILE diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c index a5ecfbacaf3..87618c91d17 100644 --- a/arch/sh/boards/mach-highlander/setup.c +++ b/arch/sh/boards/mach-highlander/setup.c @@ -24,10 +24,10 @@ #include #include #include +#include #include #include #include -#include #include #include #include diff --git a/arch/sh/include/asm/clkdev.h b/arch/sh/include/asm/clkdev.h index 5645f358128..6ba91868201 100644 --- a/arch/sh/include/asm/clkdev.h +++ b/arch/sh/include/asm/clkdev.h @@ -1,9 +1,5 @@ /* - * arch/sh/include/asm/clkdev.h - * - * Cloned from arch/arm/include/asm/clkdev.h: - * - * Copyright (C) 2008 Russell King. + * Copyright (C) 2010 Paul Mundt * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -11,25 +7,25 @@ * * Helper for the clk API to assist looking up a struct clk. */ -#ifndef __ASM_CLKDEV_H -#define __ASM_CLKDEV_H -struct clk; +#ifndef __CLKDEV__H_ +#define __CLKDEV__H_ -struct clk_lookup { - struct list_head node; - const char *dev_id; - const char *con_id; - struct clk *clk; -}; +#include +#include +#include -struct clk_lookup *clkdev_alloc(struct clk *clk, const char *con_id, - const char *dev_fmt, ...); +#include -void clkdev_add(struct clk_lookup *cl); -void clkdev_drop(struct clk_lookup *cl); +static inline struct clk_lookup_alloc *__clkdev_alloc(size_t size) +{ + if (!slab_is_available()) + return alloc_bootmem_low_pages(size); + else + return kzalloc(size, GFP_KERNEL); +} -void clkdev_add_table(struct clk_lookup *, size_t); -int clk_add_alias(const char *, const char *, char *, struct device *); +#define __clk_put(clk) +#define __clk_get(clk) ({ 1; }) -#endif +#endif /* __CLKDEV_H__ */ diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile index 8eed6a48544..cf652217952 100644 --- a/arch/sh/kernel/Makefile +++ b/arch/sh/kernel/Makefile @@ -11,7 +11,7 @@ endif CFLAGS_REMOVE_return_address.o = -pg -obj-y := clkdev.o debugtraps.o dma-nommu.o dumpstack.o \ +obj-y := debugtraps.o dma-nommu.o dumpstack.o \ idle.o io.o irq.o irq_$(BITS).o kdebugfs.o \ machvec.o nmi_debug.o process.o \ process_$(BITS).o ptrace.o ptrace_$(BITS).o \ diff --git a/arch/sh/kernel/clkdev.c b/arch/sh/kernel/clkdev.c deleted file mode 100644 index 1f800ef4a73..00000000000 --- a/arch/sh/kernel/clkdev.c +++ /dev/null @@ -1,171 +0,0 @@ -/* - * arch/sh/kernel/clkdev.c - * - * Cloned from arch/arm/common/clkdev.c: - * - * Copyright (C) 2008 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Helper for the clk API to assist looking up a struct clk. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static LIST_HEAD(clocks); -static DEFINE_MUTEX(clocks_mutex); - -/* - * Find the correct struct clk for the device and connection ID. - * We do slightly fuzzy matching here: - * An entry with a NULL ID is assumed to be a wildcard. - * If an entry has a device ID, it must match - * If an entry has a connection ID, it must match - * Then we take the most specific entry - with the following - * order of precedence: dev+con > dev only > con only. - */ -static struct clk *clk_find(const char *dev_id, const char *con_id) -{ - struct clk_lookup *p; - struct clk *clk = NULL; - int match, best = 0; - - list_for_each_entry(p, &clocks, node) { - match = 0; - if (p->dev_id) { - if (!dev_id || strcmp(p->dev_id, dev_id)) - continue; - match += 2; - } - if (p->con_id) { - if (!con_id || strcmp(p->con_id, con_id)) - continue; - match += 1; - } - if (match == 0) - continue; - - if (match > best) { - clk = p->clk; - best = match; - } - } - return clk; -} - -struct clk *clk_get_sys(const char *dev_id, const char *con_id) -{ - struct clk *clk; - - mutex_lock(&clocks_mutex); - clk = clk_find(dev_id, con_id); - mutex_unlock(&clocks_mutex); - - return clk ? clk : ERR_PTR(-ENOENT); -} -EXPORT_SYMBOL(clk_get_sys); - -void clkdev_add(struct clk_lookup *cl) -{ - mutex_lock(&clocks_mutex); - list_add_tail(&cl->node, &clocks); - mutex_unlock(&clocks_mutex); -} -EXPORT_SYMBOL(clkdev_add); - -void __init clkdev_add_table(struct clk_lookup *cl, size_t num) -{ - mutex_lock(&clocks_mutex); - while (num--) { - list_add_tail(&cl->node, &clocks); - cl++; - } - mutex_unlock(&clocks_mutex); -} - -#define MAX_DEV_ID 20 -#define MAX_CON_ID 16 - -struct clk_lookup_alloc { - struct clk_lookup cl; - char dev_id[MAX_DEV_ID]; - char con_id[MAX_CON_ID]; -}; - -struct clk_lookup * __init_refok -clkdev_alloc(struct clk *clk, const char *con_id, const char *dev_fmt, ...) -{ - struct clk_lookup_alloc *cla; - - if (!slab_is_available()) - cla = alloc_bootmem_low_pages(sizeof(*cla)); - else - cla = kzalloc(sizeof(*cla), GFP_KERNEL); - - if (!cla) - return NULL; - - cla->cl.clk = clk; - if (con_id) { - strlcpy(cla->con_id, con_id, sizeof(cla->con_id)); - cla->cl.con_id = cla->con_id; - } - - if (dev_fmt) { - va_list ap; - - va_start(ap, dev_fmt); - vscnprintf(cla->dev_id, sizeof(cla->dev_id), dev_fmt, ap); - cla->cl.dev_id = cla->dev_id; - va_end(ap); - } - - return &cla->cl; -} -EXPORT_SYMBOL(clkdev_alloc); - -int clk_add_alias(const char *alias, const char *alias_dev_name, char *id, - struct device *dev) -{ - struct clk *r = clk_get(dev, id); - struct clk_lookup *l; - - if (IS_ERR(r)) - return PTR_ERR(r); - - l = clkdev_alloc(r, alias, alias_dev_name); - clk_put(r); - if (!l) - return -ENODEV; - clkdev_add(l); - return 0; -} -EXPORT_SYMBOL(clk_add_alias); - -/* - * clkdev_drop - remove a clock dynamically allocated - */ -void clkdev_drop(struct clk_lookup *cl) -{ - struct clk_lookup_alloc *cla = container_of(cl, struct clk_lookup_alloc, cl); - - mutex_lock(&clocks_mutex); - list_del(&cl->node); - mutex_unlock(&clocks_mutex); - kfree(cla); -} -EXPORT_SYMBOL(clkdev_drop); diff --git a/arch/sh/kernel/cpu/clock-cpg.c b/arch/sh/kernel/cpu/clock-cpg.c index e2f63d68da5..dd0e0f21135 100644 --- a/arch/sh/kernel/cpu/clock-cpg.c +++ b/arch/sh/kernel/cpu/clock-cpg.c @@ -2,7 +2,7 @@ #include #include #include -#include +#include #include static struct clk master_clk = { diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c index 50f887dda56..4187cf4fe18 100644 --- a/arch/sh/kernel/cpu/clock.c +++ b/arch/sh/kernel/cpu/clock.c @@ -48,20 +48,4 @@ int __init clk_init(void) return ret; } -/* - * Returns a clock. Note that we first try to use device id on the bus - * and clock name. If this fails, we try to use clock name only. - */ -struct clk *clk_get(struct device *dev, const char *con_id) -{ - const char *dev_id = dev ? dev_name(dev) : NULL; - - return clk_get_sys(dev_id, con_id); -} -EXPORT_SYMBOL_GPL(clk_get); - -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL_GPL(clk_put); diff --git a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c index 4eabc68cd75..6c1492b8431 100644 --- a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c +++ b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c index 71291ae201b..93c646072c1 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c @@ -21,7 +21,7 @@ #include #include #include -#include +#include #include /* SH7343 registers */ diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7366.c b/arch/sh/kernel/cpu/sh4a/clock-sh7366.c index 7ce5bbcd408..049dc0628cc 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7366.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7366.c @@ -21,7 +21,7 @@ #include #include #include -#include +#include #include /* SH7366 registers */ diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c index 2030f3d9fac..9d23a36f064 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c @@ -21,7 +21,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c index d3938f0d370..55493cd5bd8 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c @@ -22,7 +22,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c index 2d9700c6b53..527936bb3ce 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c @@ -22,7 +22,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c index ce39a2ae8c6..e073e3eb4c3 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7763.c b/arch/sh/kernel/cpu/sh4a/clock-sh7763.c index 1f1df48008c..599630fc4d3 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7763.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7763.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include #include