From 4350147a816b9c5b40fa59e4fa23f17490630b79 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 7 Nov 2005 14:27:33 +1100 Subject: [PATCH] ppc64: SMU based macs cpufreq support CPU freq support using 970FX powertune facility for iMac G5 and SMU based single CPU desktop. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 8 + arch/powerpc/kernel/misc_64.S | 70 +++ arch/powerpc/platforms/powermac/Makefile | 3 +- arch/powerpc/platforms/powermac/cpufreq.c | 726 -------------------------- arch/powerpc/platforms/powermac/cpufreq_32.c | 727 +++++++++++++++++++++++++++ arch/powerpc/platforms/powermac/cpufreq_64.c | 323 ++++++++++++ arch/powerpc/platforms/powermac/setup.c | 13 - 7 files changed, 1130 insertions(+), 740 deletions(-) delete mode 100644 arch/powerpc/platforms/powermac/cpufreq.c create mode 100644 arch/powerpc/platforms/powermac/cpufreq_32.c create mode 100644 arch/powerpc/platforms/powermac/cpufreq_64.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 6ffae2d2b3f..3ac9195dab3 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -404,6 +404,14 @@ config CPU_FREQ_PMAC this currently includes some models of iBook & Titanium PowerBook. +config CPU_FREQ_PMAC64 + bool "Support for some Apple G5s" + depends on CPU_FREQ && PMAC_SMU && PPC64 + select CPU_FREQ_TABLE + help + This adds support for frequency switching on Apple iMac G5, + and some of the more recent desktop G5 machines as well. + config PPC601_SYNC_FIX bool "Workarounds for PPC601 bugs" depends on 6xx && (PPC_PREP || PPC_PMAC) diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S index b3e95ff0dba..ae1433da09b 100644 --- a/arch/powerpc/kernel/misc_64.S +++ b/arch/powerpc/kernel/misc_64.S @@ -603,6 +603,76 @@ _GLOBAL(real_writeb) blr #endif /* defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) */ +/* + * SCOM access functions for 970 (FX only for now) + * + * unsigned long scom970_read(unsigned int address); + * void scom970_write(unsigned int address, unsigned long value); + * + * The address passed in is the 24 bits register address. This code + * is 970 specific and will not check the status bits, so you should + * know what you are doing. + */ +_GLOBAL(scom970_read) + /* interrupts off */ + mfmsr r4 + ori r0,r4,MSR_EE + xori r0,r0,MSR_EE + mtmsrd r0,1 + + /* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits + * (including parity). On current CPUs they must be 0'd, + * and finally or in RW bit + */ + rlwinm r3,r3,8,0,15 + ori r3,r3,0x8000 + + /* do the actual scom read */ + sync + mtspr SPRN_SCOMC,r3 + isync + mfspr r3,SPRN_SCOMD + isync + mfspr r0,SPRN_SCOMC + isync + + /* XXX: fixup result on some buggy 970's (ouch ! we lost a bit, bah + * that's the best we can do). Not implemented yet as we don't use + * the scom on any of the bogus CPUs yet, but may have to be done + * ultimately + */ + + /* restore interrupts */ + mtmsrd r4,1 + blr + + +_GLOBAL(scom970_write) + /* interrupts off */ + mfmsr r5 + ori r0,r5,MSR_EE + xori r0,r0,MSR_EE + mtmsrd r0,1 + + /* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits + * (including parity). On current CPUs they must be 0'd. + */ + + rlwinm r3,r3,8,0,15 + + sync + mtspr SPRN_SCOMD,r4 /* write data */ + isync + mtspr SPRN_SCOMC,r3 /* write command */ + isync + mfspr 3,SPRN_SCOMC + isync + + /* restore interrupts */ + mtmsrd r5,1 + blr + + /* * Create a kernel thread * kernel_thread(fn, arg, flags) diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile index 4369676f1d5..c9df44fcf57 100644 --- a/arch/powerpc/platforms/powermac/Makefile +++ b/arch/powerpc/platforms/powermac/Makefile @@ -1,7 +1,8 @@ obj-y += pic.o setup.o time.o feature.o pci.o \ sleep.o low_i2c.o cache.o obj-$(CONFIG_PMAC_BACKLIGHT) += backlight.o -obj-$(CONFIG_CPU_FREQ_PMAC) += cpufreq.o +obj-$(CONFIG_CPU_FREQ_PMAC) += cpufreq_32.o +obj-$(CONFIG_CPU_FREQ_PMAC64) += cpufreq_64.o obj-$(CONFIG_NVRAM) += nvram.o # ppc64 pmac doesn't define CONFIG_NVRAM but needs nvram stuff obj-$(CONFIG_PPC64) += nvram.o diff --git a/arch/powerpc/platforms/powermac/cpufreq.c b/arch/powerpc/platforms/powermac/cpufreq.c deleted file mode 100644 index c47f8b69725..00000000000 --- a/arch/powerpc/platforms/powermac/cpufreq.c +++ /dev/null @@ -1,726 +0,0 @@ -/* - * arch/ppc/platforms/pmac_cpufreq.c - * - * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt - * Copyright (C) 2004 John Steele Scott - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * TODO: Need a big cleanup here. Basically, we need to have different - * cpufreq_driver structures for the different type of HW instead of the - * current mess. We also need to better deal with the detection of the - * type of machine. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* WARNING !!! This will cause calibrate_delay() to be called, - * but this is an __init function ! So you MUST go edit - * init/main.c to make it non-init before enabling DEBUG_FREQ - */ -#undef DEBUG_FREQ - -/* - * There is a problem with the core cpufreq code on SMP kernels, - * it won't recalculate the Bogomips properly - */ -#ifdef CONFIG_SMP -#warning "WARNING, CPUFREQ not recommended on SMP kernels" -#endif - -extern void low_choose_7447a_dfs(int dfs); -extern void low_choose_750fx_pll(int pll); -extern void low_sleep_handler(void); - -/* - * Currently, PowerMac cpufreq supports only high & low frequencies - * that are set by the firmware - */ -static unsigned int low_freq; -static unsigned int hi_freq; -static unsigned int cur_freq; -static unsigned int sleep_freq; - -/* - * Different models uses different mecanisms to switch the frequency - */ -static int (*set_speed_proc)(int low_speed); -static unsigned int (*get_speed_proc)(void); - -/* - * Some definitions used by the various speedprocs - */ -static u32 voltage_gpio; -static u32 frequency_gpio; -static u32 slew_done_gpio; -static int no_schedule; -static int has_cpu_l2lve; -static int is_pmu_based; - -/* There are only two frequency states for each processor. Values - * are in kHz for the time being. - */ -#define CPUFREQ_HIGH 0 -#define CPUFREQ_LOW 1 - -static struct cpufreq_frequency_table pmac_cpu_freqs[] = { - {CPUFREQ_HIGH, 0}, - {CPUFREQ_LOW, 0}, - {0, CPUFREQ_TABLE_END}, -}; - -static struct freq_attr* pmac_cpu_freqs_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static inline void local_delay(unsigned long ms) -{ - if (no_schedule) - mdelay(ms); - else - msleep(ms); -} - -#ifdef DEBUG_FREQ -static inline void debug_calc_bogomips(void) -{ - /* This will cause a recalc of bogomips and display the - * result. We backup/restore the value to avoid affecting the - * core cpufreq framework's own calculation. - */ - extern void calibrate_delay(void); - - unsigned long save_lpj = loops_per_jiffy; - calibrate_delay(); - loops_per_jiffy = save_lpj; -} -#endif /* DEBUG_FREQ */ - -/* Switch CPU speed under 750FX CPU control - */ -static int cpu_750fx_cpu_speed(int low_speed) -{ - u32 hid2; - - if (low_speed == 0) { - /* ramping up, set voltage first */ - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); - /* Make sure we sleep for at least 1ms */ - local_delay(10); - - /* tweak L2 for high voltage */ - if (has_cpu_l2lve) { - hid2 = mfspr(SPRN_HID2); - hid2 &= ~0x2000; - mtspr(SPRN_HID2, hid2); - } - } -#ifdef CONFIG_6xx - low_choose_750fx_pll(low_speed); -#endif - if (low_speed == 1) { - /* tweak L2 for low voltage */ - if (has_cpu_l2lve) { - hid2 = mfspr(SPRN_HID2); - hid2 |= 0x2000; - mtspr(SPRN_HID2, hid2); - } - - /* ramping down, set voltage last */ - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); - local_delay(10); - } - - return 0; -} - -static unsigned int cpu_750fx_get_cpu_speed(void) -{ - if (mfspr(SPRN_HID1) & HID1_PS) - return low_freq; - else - return hi_freq; -} - -/* Switch CPU speed using DFS */ -static int dfs_set_cpu_speed(int low_speed) -{ - if (low_speed == 0) { - /* ramping up, set voltage first */ - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); - /* Make sure we sleep for at least 1ms */ - local_delay(1); - } - - /* set frequency */ -#ifdef CONFIG_6xx - low_choose_7447a_dfs(low_speed); -#endif - udelay(100); - - if (low_speed == 1) { - /* ramping down, set voltage last */ - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); - local_delay(1); - } - - return 0; -} - -static unsigned int dfs_get_cpu_speed(void) -{ - if (mfspr(SPRN_HID1) & HID1_DFS) - return low_freq; - else - return hi_freq; -} - - -/* Switch CPU speed using slewing GPIOs - */ -static int gpios_set_cpu_speed(int low_speed) -{ - int gpio, timeout = 0; - - /* If ramping up, set voltage first */ - if (low_speed == 0) { - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); - /* Delay is way too big but it's ok, we schedule */ - local_delay(10); - } - - /* Set frequency */ - gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0); - if (low_speed == ((gpio & 0x01) == 0)) - goto skip; - - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, frequency_gpio, - low_speed ? 0x04 : 0x05); - udelay(200); - do { - if (++timeout > 100) - break; - local_delay(1); - gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, slew_done_gpio, 0); - } while((gpio & 0x02) == 0); - skip: - /* If ramping down, set voltage last */ - if (low_speed == 1) { - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); - /* Delay is way too big but it's ok, we schedule */ - local_delay(10); - } - -#ifdef DEBUG_FREQ - debug_calc_bogomips(); -#endif - - return 0; -} - -/* Switch CPU speed under PMU control - */ -static int pmu_set_cpu_speed(int low_speed) -{ - struct adb_request req; - unsigned long save_l2cr; - unsigned long save_l3cr; - unsigned int pic_prio; - unsigned long flags; - - preempt_disable(); - -#ifdef DEBUG_FREQ - printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1)); -#endif - pmu_suspend(); - - /* Disable all interrupt sources on openpic */ - pic_prio = mpic_cpu_get_priority(); - mpic_cpu_set_priority(0xf); - - /* Make sure the decrementer won't interrupt us */ - asm volatile("mtdec %0" : : "r" (0x7fffffff)); - /* Make sure any pending DEC interrupt occuring while we did - * the above didn't re-enable the DEC */ - mb(); - asm volatile("mtdec %0" : : "r" (0x7fffffff)); - - /* We can now disable MSR_EE */ - local_irq_save(flags); - - /* Giveup the FPU & vec */ - enable_kernel_fp(); - -#ifdef CONFIG_ALTIVEC - if (cpu_has_feature(CPU_FTR_ALTIVEC)) - enable_kernel_altivec(); -#endif /* CONFIG_ALTIVEC */ - - /* Save & disable L2 and L3 caches */ - save_l3cr = _get_L3CR(); /* (returns -1 if not available) */ - save_l2cr = _get_L2CR(); /* (returns -1 if not available) */ - - /* Send the new speed command. My assumption is that this command - * will cause PLL_CFG[0..3] to be changed next time CPU goes to sleep - */ - pmu_request(&req, NULL, 6, PMU_CPU_SPEED, 'W', 'O', 'O', 'F', low_speed); - while (!req.complete) - pmu_poll(); - - /* Prepare the northbridge for the speed transition */ - pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,1); - - /* Call low level code to backup CPU state and recover from - * hardware reset - */ - low_sleep_handler(); - - /* Restore the northbridge */ - pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,0); - - /* Restore L2 cache */ - if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0) - _set_L2CR(save_l2cr); - /* Restore L3 cache */ - if (save_l3cr != 0xffffffff && (save_l3cr & L3CR_L3E) != 0) - _set_L3CR(save_l3cr); - - /* Restore userland MMU context */ - set_context(current->active_mm->context, current->active_mm->pgd); - -#ifdef DEBUG_FREQ - printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1)); -#endif - - /* Restore low level PMU operations */ - pmu_unlock(); - - /* Restore decrementer */ - wakeup_decrementer(); - - /* Restore interrupts */ - mpic_cpu_set_priority(pic_prio); - - /* Let interrupts flow again ... */ - local_irq_restore(flags); - -#ifdef DEBUG_FREQ - debug_calc_bogomips(); -#endif - - pmu_resume(); - - preempt_enable(); - - return 0; -} - -static int do_set_cpu_speed(int speed_mode, int notify) -{ - struct cpufreq_freqs freqs; - unsigned long l3cr; - static unsigned long prev_l3cr; - - freqs.old = cur_freq; - freqs.new = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; - freqs.cpu = smp_processor_id(); - - if (freqs.old == freqs.new) - return 0; - - if (notify) - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - if (speed_mode == CPUFREQ_LOW && - cpu_has_feature(CPU_FTR_L3CR)) { - l3cr = _get_L3CR(); - if (l3cr & L3CR_L3E) { - prev_l3cr = l3cr; - _set_L3CR(0); - } - } - set_speed_proc(speed_mode == CPUFREQ_LOW); - if (speed_mode == CPUFREQ_HIGH && - cpu_has_feature(CPU_FTR_L3CR)) { - l3cr = _get_L3CR(); - if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr) - _set_L3CR(prev_l3cr); - } - if (notify) - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; - - return 0; -} - -static unsigned int pmac_cpufreq_get_speed(unsigned int cpu) -{ - return cur_freq; -} - -static int pmac_cpufreq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, pmac_cpu_freqs); -} - -static int pmac_cpufreq_target( struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate = 0; - - if (cpufreq_frequency_table_target(policy, pmac_cpu_freqs, - target_freq, relation, &newstate)) - return -EINVAL; - - return do_set_cpu_speed(newstate, 1); -} - -unsigned int pmac_get_one_cpufreq(int i) -{ - /* Supports only one CPU for now */ - return (i == 0) ? cur_freq : 0; -} - -static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy) -{ - if (policy->cpu != 0) - return -ENODEV; - - policy->governor = CPUFREQ_DEFAULT_GOVERNOR; - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - policy->cur = cur_freq; - - cpufreq_frequency_table_get_attr(pmac_cpu_freqs, policy->cpu); - return cpufreq_frequency_table_cpuinfo(policy, pmac_cpu_freqs); -} - -static u32 read_gpio(struct device_node *np) -{ - u32 *reg = (u32 *)get_property(np, "reg", NULL); - u32 offset; - - if (reg == NULL) - return 0; - /* That works for all keylargos but shall be fixed properly - * some day... The problem is that it seems we can't rely - * on the "reg" property of the GPIO nodes, they are either - * relative to the base of KeyLargo or to the base of the - * GPIO space, and the device-tree doesn't help. - */ - offset = *reg; - if (offset < KEYLARGO_GPIO_LEVELS0) - offset += KEYLARGO_GPIO_LEVELS0; - return offset; -} - -static int pmac_cpufreq_suspend(struct cpufreq_policy *policy, pm_message_t pmsg) -{ - /* Ok, this could be made a bit smarter, but let's be robust for now. We - * always force a speed change to high speed before sleep, to make sure - * we have appropriate voltage and/or bus speed for the wakeup process, - * and to make sure our loops_per_jiffies are "good enough", that is will - * not cause too short delays if we sleep in low speed and wake in high - * speed.. - */ - no_schedule = 1; - sleep_freq = cur_freq; - if (cur_freq == low_freq && !is_pmu_based) - do_set_cpu_speed(CPUFREQ_HIGH, 0); - return 0; -} - -static int pmac_cpufreq_resume(struct cpufreq_policy *policy) -{ - /* If we resume, first check if we have a get() function */ - if (get_speed_proc) - cur_freq = get_speed_proc(); - else - cur_freq = 0; - - /* We don't, hrm... we don't really know our speed here, best - * is that we force a switch to whatever it was, which is - * probably high speed due to our suspend() routine - */ - do_set_cpu_speed(sleep_freq == low_freq ? - CPUFREQ_LOW : CPUFREQ_HIGH, 0); - - no_schedule = 0; - return 0; -} - -static struct cpufreq_driver pmac_cpufreq_driver = { - .verify = pmac_cpufreq_verify, - .target = pmac_cpufreq_target, - .get = pmac_cpufreq_get_speed, - .init = pmac_cpufreq_cpu_init, - .suspend = pmac_cpufreq_suspend, - .resume = pmac_cpufreq_resume, - .flags = CPUFREQ_PM_NO_WARN, - .attr = pmac_cpu_freqs_attr, - .name = "powermac", - .owner = THIS_MODULE, -}; - - -static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode) -{ - struct device_node *volt_gpio_np = of_find_node_by_name(NULL, - "voltage-gpio"); - struct device_node *freq_gpio_np = of_find_node_by_name(NULL, - "frequency-gpio"); - struct device_node *slew_done_gpio_np = of_find_node_by_name(NULL, - "slewing-done"); - u32 *value; - - /* - * Check to see if it's GPIO driven or PMU only - * - * The way we extract the GPIO address is slightly hackish, but it - * works well enough for now. We need to abstract the whole GPIO - * stuff sooner or later anyway - */ - - if (volt_gpio_np) - voltage_gpio = read_gpio(volt_gpio_np); - if (freq_gpio_np) - frequency_gpio = read_gpio(freq_gpio_np); - if (slew_done_gpio_np) - slew_done_gpio = read_gpio(slew_done_gpio_np); - - /* If we use the frequency GPIOs, calculate the min/max speeds based - * on the bus frequencies - */ - if (frequency_gpio && slew_done_gpio) { - int lenp, rc; - u32 *freqs, *ratio; - - freqs = (u32 *)get_property(cpunode, "bus-frequencies", &lenp); - lenp /= sizeof(u32); - if (freqs == NULL || lenp != 2) { - printk(KERN_ERR "cpufreq: bus-frequencies incorrect or missing\n"); - return 1; - } - ratio = (u32 *)get_property(cpunode, "processor-to-bus-ratio*2", NULL); - if (ratio == NULL) { - printk(KERN_ERR "cpufreq: processor-to-bus-ratio*2 missing\n"); - return 1; - } - - /* Get the min/max bus frequencies */ - low_freq = min(freqs[0], freqs[1]); - hi_freq = max(freqs[0], freqs[1]); - - /* Grrrr.. It _seems_ that the device-tree is lying on the low bus - * frequency, it claims it to be around 84Mhz on some models while - * it appears to be approx. 101Mhz on all. Let's hack around here... - * fortunately, we don't need to be too precise - */ - if (low_freq < 98000000) - low_freq = 101000000; - - /* Convert those to CPU core clocks */ - low_freq = (low_freq * (*ratio)) / 2000; - hi_freq = (hi_freq * (*ratio)) / 2000; - - /* Now we get the frequencies, we read the GPIO to see what is out current - * speed - */ - rc = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0); - cur_freq = (rc & 0x01) ? hi_freq : low_freq; - - set_speed_proc = gpios_set_cpu_speed; - return 1; - } - - /* If we use the PMU, look for the min & max frequencies in the - * device-tree - */ - value = (u32 *)get_property(cpunode, "min-clock-frequency", NULL); - if (!value) - return 1; - low_freq = (*value) / 1000; - /* The PowerBook G4 12" (PowerBook6,1) has an error in the device-tree - * here */ - if (low_freq < 100000) - low_freq *= 10; - - value = (u32 *)get_property(cpunode, "max-clock-frequency", NULL); - if (!value) - return 1; - hi_freq = (*value) / 1000; - set_speed_proc = pmu_set_cpu_speed; - is_pmu_based = 1; - - return 0; -} - -static int pmac_cpufreq_init_7447A(struct device_node *cpunode) -{ - struct device_node *volt_gpio_np; - - if (get_property(cpunode, "dynamic-power-step", NULL) == NULL) - return 1; - - volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select"); - if (volt_gpio_np) - voltage_gpio = read_gpio(volt_gpio_np); - if (!voltage_gpio){ - printk(KERN_ERR "cpufreq: missing cpu-vcore-select gpio\n"); - return 1; - } - - /* OF only reports the high frequency */ - hi_freq = cur_freq; - low_freq = cur_freq/2; - - /* Read actual frequency from CPU */ - cur_freq = dfs_get_cpu_speed(); - set_speed_proc = dfs_set_cpu_speed; - get_speed_proc = dfs_get_cpu_speed; - - return 0; -} - -static int pmac_cpufreq_init_750FX(struct device_node *cpunode) -{ - struct device_node *volt_gpio_np; - u32 pvr, *value; - - if (get_property(cpunode, "dynamic-power-step", NULL) == NULL) - return 1; - - hi_freq = cur_freq; - value = (u32 *)get_property(cpunode, "reduced-clock-frequency", NULL); - if (!value) - return 1; - low_freq = (*value) / 1000; - - volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select"); - if (volt_gpio_np) - voltage_gpio = read_gpio(volt_gpio_np); - - pvr = mfspr(SPRN_PVR); - has_cpu_l2lve = !((pvr & 0xf00) == 0x100); - - set_speed_proc = cpu_750fx_cpu_speed; - get_speed_proc = cpu_750fx_get_cpu_speed; - cur_freq = cpu_750fx_get_cpu_speed(); - - return 0; -} - -/* Currently, we support the following machines: - * - * - Titanium PowerBook 1Ghz (PMU based, 667Mhz & 1Ghz) - * - Titanium PowerBook 800 (PMU based, 667Mhz & 800Mhz) - * - Titanium PowerBook 400 (PMU based, 300Mhz & 400Mhz) - * - Titanium PowerBook 500 (PMU based, 300Mhz & 500Mhz) - * - iBook2 500/600 (PMU based, 400Mhz & 500/600Mhz) - * - iBook2 700 (CPU based, 400Mhz & 700Mhz, support low voltage) - * - Recent MacRISC3 laptops - * - All new machines with 7447A CPUs - */ -static int __init pmac_cpufreq_setup(void) -{ - struct device_node *cpunode; - u32 *value; - - if (strstr(cmd_line, "nocpufreq")) - return 0; - - /* Assume only one CPU */ - cpunode = find_type_devices("cpu"); - if (!cpunode) - goto out; - - /* Get current cpu clock freq */ - value = (u32 *)get_property(cpunode, "clock-frequency", NULL); - if (!value) - goto out; - cur_freq = (*value) / 1000; - - /* Check for 7447A based MacRISC3 */ - if (machine_is_compatible("MacRISC3") && - get_property(cpunode, "dynamic-power-step", NULL) && - PVR_VER(mfspr(SPRN_PVR)) == 0x8003) { - pmac_cpufreq_init_7447A(cpunode); - /* Check for other MacRISC3 machines */ - } else if (machine_is_compatible("PowerBook3,4") || - machine_is_compatible("PowerBook3,5") || - machine_is_compatible("MacRISC3")) { - pmac_cpufreq_init_MacRISC3(cpunode); - /* Else check for iBook2 500/600 */ - } else if (machine_is_compatible("PowerBook4,1")) { - hi_freq = cur_freq; - low_freq = 400000; - set_speed_proc = pmu_set_cpu_speed; - is_pmu_based = 1; - } - /* Else check for TiPb 550 */ - else if (machine_is_compatible("PowerBook3,3") && cur_freq == 550000) { - hi_freq = cur_freq; - low_freq = 500000; - set_speed_proc = pmu_set_cpu_speed; - is_pmu_based = 1; - } - /* Else check for TiPb 400 & 500 */ - else if (machine_is_compatible("PowerBook3,2")) { - /* We only know about the 400 MHz and the 500Mhz model - * they both have 300 MHz as low frequency - */ - if (cur_freq < 350000 || cur_freq > 550000) - goto out; - hi_freq = cur_freq; - low_freq = 300000; - set_speed_proc = pmu_set_cpu_speed; - is_pmu_based = 1; - } - /* Else check for 750FX */ - else if (PVR_VER(mfspr(SPRN_PVR)) == 0x7000) - pmac_cpufreq_init_750FX(cpunode); -out: - if (set_speed_proc == NULL) - return -ENODEV; - - pmac_cpu_freqs[CPUFREQ_LOW].frequency = low_freq; - pmac_cpu_freqs[CPUFREQ_HIGH].frequency = hi_freq; - - printk(KERN_INFO "Registering PowerMac CPU frequency driver\n"); - printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n", - low_freq/1000, hi_freq/1000, cur_freq/1000); - - return cpufreq_register_driver(&pmac_cpufreq_driver); -} - -module_init(pmac_cpufreq_setup); - diff --git a/arch/powerpc/platforms/powermac/cpufreq_32.c b/arch/powerpc/platforms/powermac/cpufreq_32.c new file mode 100644 index 00000000000..7960a7bfca0 --- /dev/null +++ b/arch/powerpc/platforms/powermac/cpufreq_32.c @@ -0,0 +1,727 @@ +/* + * arch/ppc/platforms/pmac_cpufreq.c + * + * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt + * Copyright (C) 2004 John Steele Scott + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * TODO: Need a big cleanup here. Basically, we need to have different + * cpufreq_driver structures for the different type of HW instead of the + * current mess. We also need to better deal with the detection of the + * type of machine. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* WARNING !!! This will cause calibrate_delay() to be called, + * but this is an __init function ! So you MUST go edit + * init/main.c to make it non-init before enabling DEBUG_FREQ + */ +#undef DEBUG_FREQ + +/* + * There is a problem with the core cpufreq code on SMP kernels, + * it won't recalculate the Bogomips properly + */ +#ifdef CONFIG_SMP +#warning "WARNING, CPUFREQ not recommended on SMP kernels" +#endif + +extern void low_choose_7447a_dfs(int dfs); +extern void low_choose_750fx_pll(int pll); +extern void low_sleep_handler(void); + +/* + * Currently, PowerMac cpufreq supports only high & low frequencies + * that are set by the firmware + */ +static unsigned int low_freq; +static unsigned int hi_freq; +static unsigned int cur_freq; +static unsigned int sleep_freq; + +/* + * Different models uses different mecanisms to switch the frequency + */ +static int (*set_speed_proc)(int low_speed); +static unsigned int (*get_speed_proc)(void); + +/* + * Some definitions used by the various speedprocs + */ +static u32 voltage_gpio; +static u32 frequency_gpio; +static u32 slew_done_gpio; +static int no_schedule; +static int has_cpu_l2lve; +static int is_pmu_based; + +/* There are only two frequency states for each processor. Values + * are in kHz for the time being. + */ +#define CPUFREQ_HIGH 0 +#define CPUFREQ_LOW 1 + +static struct cpufreq_frequency_table pmac_cpu_freqs[] = { + {CPUFREQ_HIGH, 0}, + {CPUFREQ_LOW, 0}, + {0, CPUFREQ_TABLE_END}, +}; + +static struct freq_attr* pmac_cpu_freqs_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static inline void local_delay(unsigned long ms) +{ + if (no_schedule) + mdelay(ms); + else + msleep(ms); +} + +#ifdef DEBUG_FREQ +static inline void debug_calc_bogomips(void) +{ + /* This will cause a recalc of bogomips and display the + * result. We backup/restore the value to avoid affecting the + * core cpufreq framework's own calculation. + */ + extern void calibrate_delay(void); + + unsigned long save_lpj = loops_per_jiffy; + calibrate_delay(); + loops_per_jiffy = save_lpj; +} +#endif /* DEBUG_FREQ */ + +/* Switch CPU speed under 750FX CPU control + */ +static int cpu_750fx_cpu_speed(int low_speed) +{ + u32 hid2; + + if (low_speed == 0) { + /* ramping up, set voltage first */ + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); + /* Make sure we sleep for at least 1ms */ + local_delay(10); + + /* tweak L2 for high voltage */ + if (has_cpu_l2lve) { + hid2 = mfspr(SPRN_HID2); + hid2 &= ~0x2000; + mtspr(SPRN_HID2, hid2); + } + } +#ifdef CONFIG_6xx + low_choose_750fx_pll(low_speed); +#endif + if (low_speed == 1) { + /* tweak L2 for low voltage */ + if (has_cpu_l2lve) { + hid2 = mfspr(SPRN_HID2); + hid2 |= 0x2000; + mtspr(SPRN_HID2, hid2); + } + + /* ramping down, set voltage last */ + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); + local_delay(10); + } + + return 0; +} + +static unsigned int cpu_750fx_get_cpu_speed(void) +{ + if (mfspr(SPRN_HID1) & HID1_PS) + return low_freq; + else + return hi_freq; +} + +/* Switch CPU speed using DFS */ +static int dfs_set_cpu_speed(int low_speed) +{ + if (low_speed == 0) { + /* ramping up, set voltage first */ + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); + /* Make sure we sleep for at least 1ms */ + local_delay(1); + } + + /* set frequency */ +#ifdef CONFIG_6xx + low_choose_7447a_dfs(low_speed); +#endif + udelay(100); + + if (low_speed == 1) { + /* ramping down, set voltage last */ + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); + local_delay(1); + } + + return 0; +} + +static unsigned int dfs_get_cpu_speed(void) +{ + if (mfspr(SPRN_HID1) & HID1_DFS) + return low_freq; + else + return hi_freq; +} + + +/* Switch CPU speed using slewing GPIOs + */ +static int gpios_set_cpu_speed(int low_speed) +{ + int gpio, timeout = 0; + + /* If ramping up, set voltage first */ + if (low_speed == 0) { + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); + /* Delay is way too big but it's ok, we schedule */ + local_delay(10); + } + + /* Set frequency */ + gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0); + if (low_speed == ((gpio & 0x01) == 0)) + goto skip; + + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, frequency_gpio, + low_speed ? 0x04 : 0x05); + udelay(200); + do { + if (++timeout > 100) + break; + local_delay(1); + gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, slew_done_gpio, 0); + } while((gpio & 0x02) == 0); + skip: + /* If ramping down, set voltage last */ + if (low_speed == 1) { + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); + /* Delay is way too big but it's ok, we schedule */ + local_delay(10); + } + +#ifdef DEBUG_FREQ + debug_calc_bogomips(); +#endif + + return 0; +} + +/* Switch CPU speed under PMU control + */ +static int pmu_set_cpu_speed(int low_speed) +{ + struct adb_request req; + unsigned long save_l2cr; + unsigned long save_l3cr; + unsigned int pic_prio; + unsigned long flags; + + preempt_disable(); + +#ifdef DEBUG_FREQ + printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1)); +#endif + pmu_suspend(); + + /* Disable all interrupt sources on openpic */ + pic_prio = mpic_cpu_get_priority(); + mpic_cpu_set_priority(0xf); + + /* Make sure the decrementer won't interrupt us */ + asm volatile("mtdec %0" : : "r" (0x7fffffff)); + /* Make sure any pending DEC interrupt occuring while we did + * the above didn't re-enable the DEC */ + mb(); + asm volatile("mtdec %0" : : "r" (0x7fffffff)); + + /* We can now disable MSR_EE */ + local_irq_save(flags); + + /* Giveup the FPU & vec */ + enable_kernel_fp(); + +#ifdef CONFIG_ALTIVEC + if (cpu_has_feature(CPU_FTR_ALTIVEC)) + enable_kernel_altivec(); +#endif /* CONFIG_ALTIVEC */ + + /* Save & disable L2 and L3 caches */ + save_l3cr = _get_L3CR(); /* (returns -1 if not available) */ + save_l2cr = _get_L2CR(); /* (returns -1 if not available) */ + + /* Send the new speed command. My assumption is that this command + * will cause PLL_CFG[0..3] to be changed next time CPU goes to sleep + */ + pmu_request(&req, NULL, 6, PMU_CPU_SPEED, 'W', 'O', 'O', 'F', low_speed); + while (!req.complete) + pmu_poll(); + + /* Prepare the northbridge for the speed transition */ + pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,1); + + /* Call low level code to backup CPU state and recover from + * hardware reset + */ + low_sleep_handler(); + + /* Restore the northbridge */ + pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,0); + + /* Restore L2 cache */ + if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0) + _set_L2CR(save_l2cr); + /* Restore L3 cache */ + if (save_l3cr != 0xffffffff && (save_l3cr & L3CR_L3E) != 0) + _set_L3CR(save_l3cr); + + /* Restore userland MMU context */ + set_context(current->active_mm->context, current->active_mm->pgd); + +#ifdef DEBUG_FREQ + printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1)); +#endif + + /* Restore low level PMU operations */ + pmu_unlock(); + + /* Restore decrementer */ + wakeup_decrementer(); + + /* Restore interrupts */ + mpic_cpu_set_priority(pic_prio); + + /* Let interrupts flow again ... */ + local_irq_restore(flags); + +#ifdef DEBUG_FREQ + debug_calc_bogomips(); +#endif + + pmu_resume(); + + preempt_enable(); + + return 0; +} + +static int do_set_cpu_speed(int speed_mode, int notify) +{ + struct cpufreq_freqs freqs; + unsigned long l3cr; + static unsigned long prev_l3cr; + + freqs.old = cur_freq; + freqs.new = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; + freqs.cpu = smp_processor_id(); + + if (freqs.old == freqs.new) + return 0; + + if (notify) + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + if (speed_mode == CPUFREQ_LOW && + cpu_has_feature(CPU_FTR_L3CR)) { + l3cr = _get_L3CR(); + if (l3cr & L3CR_L3E) { + prev_l3cr = l3cr; + _set_L3CR(0); + } + } + set_speed_proc(speed_mode == CPUFREQ_LOW); + if (speed_mode == CPUFREQ_HIGH && + cpu_has_feature(CPU_FTR_L3CR)) { + l3cr = _get_L3CR(); + if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr) + _set_L3CR(prev_l3cr); + } + if (notify) + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; + + return 0; +} + +static unsigned int pmac_cpufreq_get_speed(unsigned int cpu) +{ + return cur_freq; +} + +static int pmac_cpufreq_verify(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, pmac_cpu_freqs); +} + +static int pmac_cpufreq_target( struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + unsigned int newstate = 0; + int rc; + + if (cpufreq_frequency_table_target(policy, pmac_cpu_freqs, + target_freq, relation, &newstate)) + return -EINVAL; + + rc = do_set_cpu_speed(newstate, 1); + + ppc_proc_freq = cur_freq * 1000ul; + return rc; +} + +static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + if (policy->cpu != 0) + return -ENODEV; + + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + policy->cur = cur_freq; + + cpufreq_frequency_table_get_attr(pmac_cpu_freqs, policy->cpu); + return cpufreq_frequency_table_cpuinfo(policy, pmac_cpu_freqs); +} + +static u32 read_gpio(struct device_node *np) +{ + u32 *reg = (u32 *)get_property(np, "reg", NULL); + u32 offset; + + if (reg == NULL) + return 0; + /* That works for all keylargos but shall be fixed properly + * some day... The problem is that it seems we can't rely + * on the "reg" property of the GPIO nodes, they are either + * relative to the base of KeyLargo or to the base of the + * GPIO space, and the device-tree doesn't help. + */ + offset = *reg; + if (offset < KEYLARGO_GPIO_LEVELS0) + offset += KEYLARGO_GPIO_LEVELS0; + return offset; +} + +static int pmac_cpufreq_suspend(struct cpufreq_policy *policy, pm_message_t pmsg) +{ + /* Ok, this could be made a bit smarter, but let's be robust for now. We + * always force a speed change to high speed before sleep, to make sure + * we have appropriate voltage and/or bus speed for the wakeup process, + * and to make sure our loops_per_jiffies are "good enough", that is will + * not cause too short delays if we sleep in low speed and wake in high + * speed.. + */ + no_schedule = 1; + sleep_freq = cur_freq; + if (cur_freq == low_freq && !is_pmu_based) + do_set_cpu_speed(CPUFREQ_HIGH, 0); + return 0; +} + +static int pmac_cpufreq_resume(struct cpufreq_policy *policy) +{ + /* If we resume, first check if we have a get() function */ + if (get_speed_proc) + cur_freq = get_speed_proc(); + else) + cur_freq = 0; + + /* We don't, hrm... we don't really know our speed here, best + * is that we force a switch to whatever it was, which is + * probably high speed due to our suspend() routine + */ + do_set_cpu_speed(sleep_freq == low_freq ? + CPUFREQ_LOW : CPUFREQ_HIGH, 0); + + ppc_proc_freq = cur_freq * 1000ul; + + no_schedule = 0; + return 0; +} + +static struct cpufreq_driver pmac_cpufreq_driver = { + .verify = pmac_cpufreq_verify, + .target = pmac_cpufreq_target, + .get = pmac_cpufreq_get_speed, + .init = pmac_cpufreq_cpu_init, + .suspend = pmac_cpufreq_suspend, + .resume = pmac_cpufreq_resume, + .flags = CPUFREQ_PM_NO_WARN, + .attr = pmac_cpu_freqs_attr, + .name = "powermac", + .owner = THIS_MODULE, +}; + + +static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode) +{ + struct device_node *volt_gpio_np = of_find_node_by_name(NULL, + "voltage-gpio"); + struct device_node *freq_gpio_np = of_find_node_by_name(NULL, + "frequency-gpio"); + struct device_node *slew_done_gpio_np = of_find_node_by_name(NULL, + "slewing-done"); + u32 *value; + + /* + * Check to see if it's GPIO driven or PMU only + * + * The way we extract the GPIO address is slightly hackish, but it + * works well enough for now. We need to abstract the whole GPIO + * stuff sooner or later anyway + */ + + if (volt_gpio_np) + voltage_gpio = read_gpio(volt_gpio_np); + if (freq_gpio_np) + frequency_gpio = read_gpio(freq_gpio_np); + if (slew_done_gpio_np) + slew_done_gpio = read_gpio(slew_done_gpio_np); + + /* If we use the frequency GPIOs, calculate the min/max speeds based + * on the bus frequencies + */ + if (frequency_gpio && slew_done_gpio) { + int lenp, rc; + u32 *freqs, *ratio; + + freqs = (u32 *)get_property(cpunode, "bus-frequencies", &lenp); + lenp /= sizeof(u32); + if (freqs == NULL || lenp != 2) { + printk(KERN_ERR "cpufreq: bus-frequencies incorrect or missing\n"); + return 1; + } + ratio = (u32 *)get_property(cpunode, "processor-to-bus-ratio*2", NULL); + if (ratio == NULL) { + printk(KERN_ERR "cpufreq: processor-to-bus-ratio*2 missing\n"); + return 1; + } + + /* Get the min/max bus frequencies */ + low_freq = min(freqs[0], freqs[1]); + hi_freq = max(freqs[0], freqs[1]); + + /* Grrrr.. It _seems_ that the device-tree is lying on the low bus + * frequency, it claims it to be around 84Mhz on some models while + * it appears to be approx. 101Mhz on all. Let's hack around here... + * fortunately, we don't need to be too precise + */ + if (low_freq < 98000000) + low_freq = 101000000; + + /* Convert those to CPU core clocks */ + low_freq = (low_freq * (*ratio)) / 2000; + hi_freq = (hi_freq * (*ratio)) / 2000; + + /* Now we get the frequencies, we read the GPIO to see what is out current + * speed + */ + rc = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0); + cur_freq = (rc & 0x01) ? hi_freq : low_freq; + + set_speed_proc = gpios_set_cpu_speed; + return 1; + } + + /* If we use the PMU, look for the min & max frequencies in the + * device-tree + */ + value = (u32 *)get_property(cpunode, "min-clock-frequency", NULL); + if (!value) + return 1; + low_freq = (*value) / 1000; + /* The PowerBook G4 12" (PowerBook6,1) has an error in the device-tree + * here */ + if (low_freq < 100000) + low_freq *= 10; + + value = (u32 *)get_property(cpunode, "max-clock-frequency", NULL); + if (!value) + return 1; + hi_freq = (*value) / 1000; + set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; + + return 0; +} + +static int pmac_cpufreq_init_7447A(struct device_node *cpunode) +{ + struct device_node *volt_gpio_np; + + if (get_property(cpunode, "dynamic-power-step", NULL) == NULL) + return 1; + + volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select"); + if (volt_gpio_np) + voltage_gpio = read_gpio(volt_gpio_np); + if (!voltage_gpio){ + printk(KERN_ERR "cpufreq: missing cpu-vcore-select gpio\n"); + return 1; + } + + /* OF only reports the high frequency */ + hi_freq = cur_freq; + low_freq = cur_freq/2; + + /* Read actual frequency from CPU */ + cur_freq = dfs_get_cpu_speed(); + set_speed_proc = dfs_set_cpu_speed; + get_speed_proc = dfs_get_cpu_speed; + + return 0; +} + +static int pmac_cpufreq_init_750FX(struct device_node *cpunode) +{ + struct device_node *volt_gpio_np; + u32 pvr, *value; + + if (get_property(cpunode, "dynamic-power-step", NULL) == NULL) + return 1; + + hi_freq = cur_freq; + value = (u32 *)get_property(cpunode, "reduced-clock-frequency", NULL); + if (!value) + return 1; + low_freq = (*value) / 1000; + + volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select"); + if (volt_gpio_np) + voltage_gpio = read_gpio(volt_gpio_np); + + pvr = mfspr(SPRN_PVR); + has_cpu_l2lve = !((pvr & 0xf00) == 0x100); + + set_speed_proc = cpu_750fx_cpu_speed; + get_speed_proc = cpu_750fx_get_cpu_speed; + cur_freq = cpu_750fx_get_cpu_speed(); + + return 0; +} + +/* Currently, we support the following machines: + * + * - Titanium PowerBook 1Ghz (PMU based, 667Mhz & 1Ghz) + * - Titanium PowerBook 800 (PMU based, 667Mhz & 800Mhz) + * - Titanium PowerBook 400 (PMU based, 300Mhz & 400Mhz) + * - Titanium PowerBook 500 (PMU based, 300Mhz & 500Mhz) + * - iBook2 500/600 (PMU based, 400Mhz & 500/600Mhz) + * - iBook2 700 (CPU based, 400Mhz & 700Mhz, support low voltage) + * - Recent MacRISC3 laptops + * - All new machines with 7447A CPUs + */ +static int __init pmac_cpufreq_setup(void) +{ + struct device_node *cpunode; + u32 *value; + + if (strstr(cmd_line, "nocpufreq")) + return 0; + + /* Assume only one CPU */ + cpunode = find_type_devices("cpu"); + if (!cpunode) + goto out; + + /* Get current cpu clock freq */ + value = (u32 *)get_property(cpunode, "clock-frequency", NULL); + if (!value) + goto out; + cur_freq = (*value) / 1000; + + /* Check for 7447A based MacRISC3 */ + if (machine_is_compatible("MacRISC3") && + get_property(cpunode, "dynamic-power-step", NULL) && + PVR_VER(mfspr(SPRN_PVR)) == 0x8003) { + pmac_cpufreq_init_7447A(cpunode); + /* Check for other MacRISC3 machines */ + } else if (machine_is_compatible("PowerBook3,4") || + machine_is_compatible("PowerBook3,5") || + machine_is_compatible("MacRISC3")) { + pmac_cpufreq_init_MacRISC3(cpunode); + /* Else check for iBook2 500/600 */ + } else if (machine_is_compatible("PowerBook4,1")) { + hi_freq = cur_freq; + low_freq = 400000; + set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; + } + /* Else check for TiPb 550 */ + else if (machine_is_compatible("PowerBook3,3") && cur_freq == 550000) { + hi_freq = cur_freq; + low_freq = 500000; + set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; + } + /* Else check for TiPb 400 & 500 */ + else if (machine_is_compatible("PowerBook3,2")) { + /* We only know about the 400 MHz and the 500Mhz model + * they both have 300 MHz as low frequency + */ + if (cur_freq < 350000 || cur_freq > 550000) + goto out; + hi_freq = cur_freq; + low_freq = 300000; + set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; + } + /* Else check for 750FX */ + else if (PVR_VER(mfspr(SPRN_PVR)) == 0x7000) + pmac_cpufreq_init_750FX(cpunode); +out: + if (set_speed_proc == NULL) + return -ENODEV; + + pmac_cpu_freqs[CPUFREQ_LOW].frequency = low_freq; + pmac_cpu_freqs[CPUFREQ_HIGH].frequency = hi_freq; + ppc_proc_freq = cur_freq * 1000ul; + + printk(KERN_INFO "Registering PowerMac CPU frequency driver\n"); + printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n", + low_freq/1000, hi_freq/1000, cur_freq/1000); + + return cpufreq_register_driver(&pmac_cpufreq_driver); +} + +module_init(pmac_cpufreq_setup); + diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c new file mode 100644 index 00000000000..39150342c6f --- /dev/null +++ b/arch/powerpc/platforms/powermac/cpufreq_64.c @@ -0,0 +1,323 @@ +/* + * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt + * and Markus Demleitner + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This driver adds basic cpufreq support for SMU & 970FX based G5 Macs, + * that is iMac G5 and latest single CPU desktop. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#undef DEBUG + +#ifdef DEBUG +#define DBG(fmt...) printk(fmt) +#else +#define DBG(fmt...) +#endif + +/* see 970FX user manual */ + +#define SCOM_PCR 0x0aa001 /* PCR scom addr */ + +#define PCR_HILO_SELECT 0x80000000U /* 1 = PCR, 0 = PCRH */ +#define PCR_SPEED_FULL 0x00000000U /* 1:1 speed value */ +#define PCR_SPEED_HALF 0x00020000U /* 1:2 speed value */ +#define PCR_SPEED_QUARTER 0x00040000U /* 1:4 speed value */ +#define PCR_SPEED_MASK 0x000e0000U /* speed mask */ +#define PCR_SPEED_SHIFT 17 +#define PCR_FREQ_REQ_VALID 0x00010000U /* freq request valid */ +#define PCR_VOLT_REQ_VALID 0x00008000U /* volt request valid */ +#define PCR_TARGET_TIME_MASK 0x00006000U /* target time */ +#define PCR_STATLAT_MASK 0x00001f00U /* STATLAT value */ +#define PCR_SNOOPLAT_MASK 0x000000f0U /* SNOOPLAT value */ +#define PCR_SNOOPACC_MASK 0x0000000fU /* SNOOPACC value */ + +#define SCOM_PSR 0x408001 /* PSR scom addr */ +/* warning: PSR is a 64 bits register */ +#define PSR_CMD_RECEIVED 0x2000000000000000U /* command received */ +#define PSR_CMD_COMPLETED 0x1000000000000000U /* command completed */ +#define PSR_CUR_SPEED_MASK 0x0300000000000000U /* current speed */ +#define PSR_CUR_SPEED_SHIFT (56) + +/* + * The G5 only supports two frequencies (Quarter speed is not supported) + */ +#define CPUFREQ_HIGH 0 +#define CPUFREQ_LOW 1 + +static struct cpufreq_frequency_table g5_cpu_freqs[] = { + {CPUFREQ_HIGH, 0}, + {CPUFREQ_LOW, 0}, + {0, CPUFREQ_TABLE_END}, +}; + +static struct freq_attr* g5_cpu_freqs_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +/* Power mode data is an array of the 32 bits PCR values to use for + * the various frequencies, retreived from the device-tree + */ +static u32 *g5_pmode_data; +static int g5_pmode_max; +static int g5_pmode_cur; + +static DECLARE_MUTEX(g5_switch_mutex); + + +static struct smu_sdbp_fvt *g5_fvt_table; /* table of op. points */ +static int g5_fvt_count; /* number of op. points */ +static int g5_fvt_cur; /* current op. point */ + +/* ----------------- real hardware interface */ + +static void g5_switch_volt(int speed_mode) +{ + struct smu_simple_cmd cmd; + + DECLARE_COMPLETION(comp); + smu_queue_simple(&cmd, SMU_CMD_POWER_COMMAND, 8, smu_done_complete, + &comp, 'V', 'S', 'L', 'E', 'W', + 0xff, g5_fvt_cur+1, speed_mode); + wait_for_completion(&comp); +} + +static int g5_switch_freq(int speed_mode) +{ + struct cpufreq_freqs freqs; + int to; + + if (g5_pmode_cur == speed_mode) + return 0; + + down(&g5_switch_mutex); + + freqs.old = g5_cpu_freqs[g5_pmode_cur].frequency; + freqs.new = g5_cpu_freqs[speed_mode].frequency; + freqs.cpu = 0; + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + /* If frequency is going up, first ramp up the voltage */ + if (speed_mode < g5_pmode_cur) + g5_switch_volt(speed_mode); + + /* Clear PCR high */ + scom970_write(SCOM_PCR, 0); + /* Clear PCR low */ + scom970_write(SCOM_PCR, PCR_HILO_SELECT | 0); + /* Set PCR low */ + scom970_write(SCOM_PCR, PCR_HILO_SELECT | + g5_pmode_data[speed_mode]); + + /* Wait for completion */ + for (to = 0; to < 10; to++) { + unsigned long psr = scom970_read(SCOM_PSR); + + if ((psr & PSR_CMD_RECEIVED) == 0 && + (((psr >> PSR_CUR_SPEED_SHIFT) ^ + (g5_pmode_data[speed_mode] >> PCR_SPEED_SHIFT)) & 0x3) + == 0) + break; + if (psr & PSR_CMD_COMPLETED) + break; + udelay(100); + } + + /* If frequency is going down, last ramp the voltage */ + if (speed_mode > g5_pmode_cur) + g5_switch_volt(speed_mode); + + g5_pmode_cur = speed_mode; + ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul; + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + up(&g5_switch_mutex); + + return 0; +} + +static int g5_query_freq(void) +{ + unsigned long psr = scom970_read(SCOM_PSR); + int i; + + for (i = 0; i <= g5_pmode_max; i++) + if ((((psr >> PSR_CUR_SPEED_SHIFT) ^ + (g5_pmode_data[i] >> PCR_SPEED_SHIFT)) & 0x3) == 0) + break; + return i; +} + +/* ----------------- cpufreq bookkeeping */ + +static int g5_cpufreq_verify(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, g5_cpu_freqs); +} + +static int g5_cpufreq_target(struct cpufreq_policy *policy, + unsigned int target_freq, unsigned int relation) +{ + unsigned int newstate = 0; + + if (cpufreq_frequency_table_target(policy, g5_cpu_freqs, + target_freq, relation, &newstate)) + return -EINVAL; + + return g5_switch_freq(newstate); +} + +static unsigned int g5_cpufreq_get_speed(unsigned int cpu) +{ + return g5_cpu_freqs[g5_pmode_cur].frequency; +} + +static int g5_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + if (policy->cpu != 0) + return -ENODEV; + + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + policy->cur = g5_cpu_freqs[g5_query_freq()].frequency; + cpufreq_frequency_table_get_attr(g5_cpu_freqs, policy->cpu); + + return cpufreq_frequency_table_cpuinfo(policy, + g5_cpu_freqs); +} + + +static struct cpufreq_driver g5_cpufreq_driver = { + .name = "powermac", + .owner = THIS_MODULE, + .flags = CPUFREQ_CONST_LOOPS, + .init = g5_cpufreq_cpu_init, + .verify = g5_cpufreq_verify, + .target = g5_cpufreq_target, + .get = g5_cpufreq_get_speed, + .attr = g5_cpu_freqs_attr, +}; + + +static int __init g5_cpufreq_init(void) +{ + struct device_node *cpunode; + unsigned int psize, ssize; + struct smu_sdbp_header *shdr; + unsigned long max_freq; + u32 *valp; + int rc = -ENODEV; + + /* Look for CPU and SMU nodes */ + cpunode = of_find_node_by_type(NULL, "cpu"); + if (!cpunode) { + DBG("No CPU node !\n"); + return -ENODEV; + } + + /* Check 970FX for now */ + valp = (u32 *)get_property(cpunode, "cpu-version", NULL); + if (!valp) { + DBG("No cpu-version property !\n"); + goto bail_noprops; + } + if (((*valp) >> 16) != 0x3c) { + DBG("Wrong CPU version: %08x\n", *valp); + goto bail_noprops; + } + + /* Look for the powertune data in the device-tree */ + g5_pmode_data = (u32 *)get_property(cpunode, "power-mode-data",&psize); + if (!g5_pmode_data) { + DBG("No power-mode-data !\n"); + goto bail_noprops; + } + g5_pmode_max = psize / sizeof(u32) - 1; + + /* Look for the FVT table */ + shdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL); + if (!shdr) + goto bail_noprops; + g5_fvt_table = (struct smu_sdbp_fvt *)&shdr[1]; + ssize = (shdr->len * sizeof(u32)) - sizeof(struct smu_sdbp_header); + g5_fvt_count = ssize / sizeof(struct smu_sdbp_fvt); + g5_fvt_cur = 0; + + /* Sanity checking */ + if (g5_fvt_count < 1 || g5_pmode_max < 1) + goto bail_noprops; + + /* + * From what I see, clock-frequency is always the maximal frequency. + * The current driver can not slew sysclk yet, so we really only deal + * with powertune steps for now. We also only implement full freq and + * half freq in this version. So far, I haven't yet seen a machine + * supporting anything else. + */ + valp = (u32 *)get_property(cpunode, "clock-frequency", NULL); + if (!valp) + return -ENODEV; + max_freq = (*valp)/1000; + g5_cpu_freqs[0].frequency = max_freq; + g5_cpu_freqs[1].frequency = max_freq/2; + + /* Check current frequency */ + g5_pmode_cur = g5_query_freq(); + if (g5_pmode_cur > 1) + /* We don't support anything but 1:1 and 1:2, fixup ... */ + g5_pmode_cur = 1; + + /* Force apply current frequency to make sure everything is in + * sync (voltage is right for example). Firmware may leave us with + * a strange setting ... + */ + g5_switch_freq(g5_pmode_cur); + + printk(KERN_INFO "Registering G5 CPU frequency driver\n"); + printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", + g5_cpu_freqs[1].frequency/1000, + g5_cpu_freqs[0].frequency/1000, + g5_cpu_freqs[g5_pmode_cur].frequency/1000); + + rc = cpufreq_register_driver(&g5_cpufreq_driver); + + /* We keep the CPU node on hold... hopefully, Apple G5 don't have + * hotplug CPU with a dynamic device-tree ... + */ + return rc; + + bail_noprops: + of_node_put(cpunode); + + return rc; +} + +module_init(g5_cpufreq_init); + + +MODULE_LICENSE("GPL"); diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 80b58c1ec41..7acb0546671 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -193,18 +193,6 @@ static void pmac_show_cpuinfo(struct seq_file *m) pmac_newworld ? "NewWorld" : "OldWorld"); } -static void pmac_show_percpuinfo(struct seq_file *m, int i) -{ -#ifdef CONFIG_CPU_FREQ_PMAC - extern unsigned int pmac_get_one_cpufreq(int i); - unsigned int freq = pmac_get_one_cpufreq(i); - if (freq != 0) { - seq_printf(m, "clock\t\t: %dMHz\n", freq/1000); - return; - } -#endif /* CONFIG_CPU_FREQ_PMAC */ -} - #ifndef CONFIG_ADB_CUDA int find_via_cuda(void) { @@ -767,7 +755,6 @@ struct machdep_calls __initdata pmac_md = { .setup_arch = pmac_setup_arch, .init_early = pmac_init_early, .show_cpuinfo = pmac_show_cpuinfo, - .show_percpuinfo = pmac_show_percpuinfo, .init_IRQ = pmac_pic_init, .get_irq = mpic_get_irq, /* changed later */ .pcibios_fixup = pmac_pcibios_fixup, -- cgit v1.2.3-18-g5258