From 56825c88ff438f4dbb51a44591cc29e707fe783a Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 8 Jul 2010 21:16:10 +0400 Subject: powerpc/cpm: Reintroduce global spi_pram struct (fixes build issue) spi_t was removed in commit 644b2a680ccc51a9ec4d6beb12e9d47d2dee98e2 ("powerpc/cpm: Remove SPI defines and spi structs"), the commit assumed that spi_t isn't used anywhere outside of the spi_mpc8xxx driver. But it appears that the struct is needed for micropatch code. So, let's reintroduce the struct. Fixes the following build issue: CC arch/powerpc/sysdev/micropatch.o micropatch.c: In function 'cpm_load_patch': micropatch.c:629: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token micropatch.c:629: error: 'spp' undeclared (first use in this function) micropatch.c:629: error: (Each undeclared identifier is reported only once micropatch.c:629: error: for each function it appears in.) Reported-by: LEROY Christophe Reported-by: Tony Breeds Cc: [ .33, .34 ] Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- arch/powerpc/include/asm/cpm.h | 24 ++++++++++++++++++++++++ arch/powerpc/sysdev/micropatch.c | 7 ++++--- 2 files changed, 28 insertions(+), 3 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/include/asm/cpm.h b/arch/powerpc/include/asm/cpm.h index 0835eb977ba..e50323fe941 100644 --- a/arch/powerpc/include/asm/cpm.h +++ b/arch/powerpc/include/asm/cpm.h @@ -6,6 +6,30 @@ #include #include +/* + * SPI Parameter RAM common to QE and CPM. + */ +struct spi_pram { + __be16 rbase; /* Rx Buffer descriptor base address */ + __be16 tbase; /* Tx Buffer descriptor base address */ + u8 rfcr; /* Rx function code */ + u8 tfcr; /* Tx function code */ + __be16 mrblr; /* Max receive buffer length */ + __be32 rstate; /* Internal */ + __be32 rdp; /* Internal */ + __be16 rbptr; /* Internal */ + __be16 rbc; /* Internal */ + __be32 rxtmp; /* Internal */ + __be32 tstate; /* Internal */ + __be32 tdp; /* Internal */ + __be16 tbptr; /* Internal */ + __be16 tbc; /* Internal */ + __be32 txtmp; /* Internal */ + __be32 res; /* Tx temp. */ + __be16 rpbase; /* Relocation pointer (CPM1 only) */ + __be16 res1; /* Reserved */ +}; + /* * USB Controller pram common to QE and CPM. */ diff --git a/arch/powerpc/sysdev/micropatch.c b/arch/powerpc/sysdev/micropatch.c index d8d60284075..18080f376e1 100644 --- a/arch/powerpc/sysdev/micropatch.c +++ b/arch/powerpc/sysdev/micropatch.c @@ -16,6 +16,7 @@ #include #include #include +#include #include /* @@ -626,7 +627,7 @@ cpm_load_patch(cpm8xx_t *cp) volatile uint *dp; /* Dual-ported RAM. */ volatile cpm8xx_t *commproc; volatile iic_t *iip; - volatile spi_t *spp; + volatile struct spi_pram *spp; volatile smc_uart_t *smp; int i; @@ -668,8 +669,8 @@ cpm_load_patch(cpm8xx_t *cp) /* Put SPI above the IIC, also 32-byte aligned. */ i = (RPBASE + sizeof(iic_t) + 31) & ~31; - spp = (spi_t *)&commproc->cp_dparam[PROFF_SPI]; - spp->spi_rpbase = i; + spp = (struct spi_pram *)&commproc->cp_dparam[PROFF_SPI]; + spp->rpbase = i; # if defined(CONFIG_I2C_SPI_UCODE_PATCH) commproc->cp_cpmcr1 = 0x802a; -- cgit v1.2.3-18-g5258 From 2069a6ae19a34d96cc9cb284eb645b165138e03f Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 8 Jul 2010 21:16:14 +0400 Subject: powerpc/cpm1: Fix build with various CONFIG_*_UCODE_PATCH combinations Warnings are treated as errors for arch/powerpc code, so build fails with CONFIG_I2C_SPI_UCODE_PATCH=y: CC arch/powerpc/sysdev/micropatch.o cc1: warnings being treated as errors arch/powerpc/sysdev/micropatch.c: In function 'cpm_load_patch': arch/powerpc/sysdev/micropatch.c:630: warning: unused variable 'smp' make[1]: *** [arch/powerpc/sysdev/micropatch.o] Error 1 And with CONFIG_USB_SOF_UCODE_PATCH=y: CC arch/powerpc/sysdev/micropatch.o cc1: warnings being treated as errors arch/powerpc/sysdev/micropatch.c: In function 'cpm_load_patch': arch/powerpc/sysdev/micropatch.c:629: warning: unused variable 'spp' arch/powerpc/sysdev/micropatch.c:628: warning: unused variable 'iip' make[1]: *** [arch/powerpc/sysdev/micropatch.o] Error 1 This patch fixes these issues by introducing proper #ifdefs. Cc: [ .33, .34 ] Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/micropatch.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/sysdev/micropatch.c b/arch/powerpc/sysdev/micropatch.c index 18080f376e1..6c56ae902d4 100644 --- a/arch/powerpc/sysdev/micropatch.c +++ b/arch/powerpc/sysdev/micropatch.c @@ -626,9 +626,14 @@ cpm_load_patch(cpm8xx_t *cp) { volatile uint *dp; /* Dual-ported RAM. */ volatile cpm8xx_t *commproc; +#if defined(CONFIG_I2C_SPI_UCODE_PATCH) || \ + defined(CONFIG_I2C_SPI_SMC1_UCODE_PATCH) volatile iic_t *iip; volatile struct spi_pram *spp; +#ifdef CONFIG_I2C_SPI_SMC1_UCODE_PATCH volatile smc_uart_t *smp; +#endif +#endif int i; commproc = cp; -- cgit v1.2.3-18-g5258 From af71bcfeaaaad92147922282341d394093a4fc9b Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 8 Jul 2010 21:16:16 +0400 Subject: powerpc/cpm1: Mark micropatch code/data static and __init This saves runtime memory and fixes lots of sparse warnings like this: CHECK arch/powerpc/sysdev/micropatch.c arch/powerpc/sysdev/micropatch.c:27:6: warning: symbol 'patch_2000' was not declared. Should it be static? arch/powerpc/sysdev/micropatch.c:146:6: warning: symbol 'patch_2f00' was not declared. Should it be static? ... Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- arch/powerpc/include/asm/cpm1.h | 3 ++- arch/powerpc/sysdev/micropatch.c | 18 +++++++++--------- 2 files changed, 11 insertions(+), 10 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/include/asm/cpm1.h b/arch/powerpc/include/asm/cpm1.h index 81b01192f44..bd07650dca5 100644 --- a/arch/powerpc/include/asm/cpm1.h +++ b/arch/powerpc/include/asm/cpm1.h @@ -17,6 +17,7 @@ #ifndef __CPM1__ #define __CPM1__ +#include #include #include #include @@ -54,7 +55,7 @@ extern cpm8xx_t __iomem *cpmp; /* Pointer to comm processor */ extern void cpm_setbrg(uint brg, uint rate); -extern void cpm_load_patch(cpm8xx_t *cp); +extern void __init cpm_load_patch(cpm8xx_t *cp); extern void cpm_reset(void); diff --git a/arch/powerpc/sysdev/micropatch.c b/arch/powerpc/sysdev/micropatch.c index 6c56ae902d4..c0bb76ef724 100644 --- a/arch/powerpc/sysdev/micropatch.c +++ b/arch/powerpc/sysdev/micropatch.c @@ -4,6 +4,7 @@ * also relocates SMC2, but this would require additional changes * to uart.c, so I am holding off on that for a moment. */ +#include #include #include #include @@ -25,7 +26,7 @@ #ifdef CONFIG_I2C_SPI_UCODE_PATCH -uint patch_2000[] = { +static uint patch_2000[] __initdata = { 0x7FFFEFD9, 0x3FFD0000, 0x7FFB49F7, @@ -144,7 +145,7 @@ uint patch_2000[] = { 0x5F8247F8 }; -uint patch_2f00[] = { +static uint patch_2f00[] __initdata = { 0x3E303430, 0x34343737, 0xABF7BF9B, @@ -183,7 +184,7 @@ uint patch_2f00[] = { #ifdef CONFIG_I2C_SPI_SMC1_UCODE_PATCH -uint patch_2000[] = { +static uint patch_2000[] __initdata = { 0x3fff0000, 0x3ffd0000, 0x3ffb0000, @@ -506,7 +507,7 @@ uint patch_2000[] = { 0x6079e2bb }; -uint patch_2f00[] = { +static uint patch_2f00[] __initdata = { 0x30303030, 0x3e3e3434, 0xabbf9b99, @@ -573,7 +574,7 @@ uint patch_2f00[] = { 0xf22f3f23 }; -uint patch_2e00[] = { +static uint patch_2e00[] __initdata = { 0x27eeeeee, 0xeeeeeeee, 0xeeeeeeee, @@ -599,7 +600,7 @@ uint patch_2e00[] = { #ifdef CONFIG_USB_SOF_UCODE_PATCH -uint patch_2000[] = { +static uint patch_2000[] __initdata = { 0x7fff0000, 0x7ffd0000, 0x7ffb0000, @@ -614,15 +615,14 @@ uint patch_2000[] = { 0x60750000 }; -uint patch_2f00[] = { +static uint patch_2f00[] __initdata = { 0x3030304c, 0xcab9e441, 0xa1aaf220 }; #endif -void -cpm_load_patch(cpm8xx_t *cp) +void __init cpm_load_patch(cpm8xx_t *cp) { volatile uint *dp; /* Dual-ported RAM. */ volatile cpm8xx_t *commproc; -- cgit v1.2.3-18-g5258 From 77154a2026ee5cb2ce05a7d370c16e4c123028e5 Mon Sep 17 00:00:00 2001 From: Matthew McClintock Date: Tue, 29 Jun 2010 14:42:07 -0500 Subject: powerpc/fsl-booke: Fix address issue when using relocatable kernels When booting a relocatable kernel it needs to jump to the correct start address, which for BookE parts is usually unchanged regardless of the physical memory offset. Recent changes cause problems with how we calculate the start address, it was always adding the RMO into the start address which is incorrect. This patch only adds in the RMO offset if we are in the kexec code path, as it needs the RMO to work correctly. Instead of adding the RMO offset in in the common code path, we can just set r6 to the RMO offset in the kexec code path instead of to zero, and finally perform the masking in the common code path Signed-off-by: Matthew McClintock Signed-off-by: Kumar Gala --- arch/powerpc/kernel/fsl_booke_entry_mapping.S | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/fsl_booke_entry_mapping.S b/arch/powerpc/kernel/fsl_booke_entry_mapping.S index beb4d78a230..a92c79be272 100644 --- a/arch/powerpc/kernel/fsl_booke_entry_mapping.S +++ b/arch/powerpc/kernel/fsl_booke_entry_mapping.S @@ -205,8 +205,7 @@ next_tlb_setup: bdnz+ next_tlb_setup /* 7. Jump to our 1:1 mapping */ - li r6, 0 - + mr r6, r25 #else #error You need to specify the mapping or not use this at all. #endif @@ -217,7 +216,6 @@ next_tlb_setup: 1: mflr r9 rlwimi r6,r9,0,20,31 addi r6,r6,(2f - 1b) - add r6, r6, r25 mtspr SPRN_SRR0,r6 mtspr SPRN_SRR1,r7 rfi /* start execution out of TLB1[0] entry */ -- cgit v1.2.3-18-g5258 From 95f72d1ed41a66f1c1c29c24d479de81a0bea36f Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 12 Jul 2010 14:36:09 +1000 Subject: lmb: rename to memblock via following scripts FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/lmb/memblock/g' \ -e 's/LMB/MEMBLOCK/g' \ $FILES for N in $(find . -name lmb.[ch]); do M=$(echo $N | sed 's/lmb/memblock/g') mv $N $M done and remove some wrong change like lmbench and dlmb etc. also move memblock.c from lib/ to mm/ Suggested-by: Ingo Molnar Acked-by: "H. Peter Anvin" Acked-by: Benjamin Herrenschmidt Acked-by: Linus Torvalds Signed-off-by: Yinghai Lu Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/Kconfig | 2 +- arch/powerpc/include/asm/abs_addr.h | 2 +- arch/powerpc/include/asm/lmb.h | 15 ----- arch/powerpc/include/asm/memblock.h | 15 +++++ arch/powerpc/kernel/btext.c | 2 +- arch/powerpc/kernel/crash.c | 2 +- arch/powerpc/kernel/crash_dump.c | 4 +- arch/powerpc/kernel/dma-swiotlb.c | 2 +- arch/powerpc/kernel/dma.c | 4 +- arch/powerpc/kernel/machine_kexec.c | 12 ++-- arch/powerpc/kernel/paca.c | 8 +-- arch/powerpc/kernel/prom.c | 62 +++++++++--------- arch/powerpc/kernel/rtas.c | 6 +- arch/powerpc/kernel/setup-common.c | 2 +- arch/powerpc/kernel/setup_32.c | 16 ++--- arch/powerpc/kernel/setup_64.c | 20 +++--- arch/powerpc/kernel/vdso.c | 4 +- arch/powerpc/mm/40x_mmu.c | 2 +- arch/powerpc/mm/hash_utils_64.c | 26 ++++---- arch/powerpc/mm/init_32.c | 16 ++--- arch/powerpc/mm/init_64.c | 2 +- arch/powerpc/mm/mem.c | 78 +++++++++++------------ arch/powerpc/mm/numa.c | 84 ++++++++++++------------- arch/powerpc/mm/pgtable_32.c | 6 +- arch/powerpc/mm/pgtable_64.c | 4 +- arch/powerpc/mm/ppc_mmu_32.c | 4 +- arch/powerpc/mm/stab.c | 4 +- arch/powerpc/mm/tlb_nohash.c | 4 +- arch/powerpc/platforms/85xx/corenet_ds.c | 4 +- arch/powerpc/platforms/85xx/mpc8536_ds.c | 4 +- arch/powerpc/platforms/85xx/mpc85xx_ds.c | 4 +- arch/powerpc/platforms/85xx/mpc85xx_mds.c | 4 +- arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 4 +- arch/powerpc/platforms/cell/iommu.c | 10 +-- arch/powerpc/platforms/embedded6xx/wii.c | 12 ++-- arch/powerpc/platforms/maple/setup.c | 2 +- arch/powerpc/platforms/pasemi/iommu.c | 4 +- arch/powerpc/platforms/powermac/setup.c | 4 +- arch/powerpc/platforms/ps3/htab.c | 2 +- arch/powerpc/platforms/ps3/mm.c | 6 +- arch/powerpc/platforms/ps3/os-area.c | 4 +- arch/powerpc/platforms/pseries/hotplug-memory.c | 38 +++++------ arch/powerpc/platforms/pseries/iommu.c | 2 +- arch/powerpc/platforms/pseries/phyp_dump.c | 4 +- arch/powerpc/sysdev/dart_iommu.c | 8 +-- arch/powerpc/sysdev/fsl_pci.c | 4 +- 46 files changed, 264 insertions(+), 264 deletions(-) delete mode 100644 arch/powerpc/include/asm/lmb.h create mode 100644 arch/powerpc/include/asm/memblock.h (limited to 'arch/powerpc') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 6506bf4fbff..2031a284686 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -132,7 +132,7 @@ config PPC select HAVE_ARCH_KGDB select HAVE_KRETPROBES select HAVE_ARCH_TRACEHOOK - select HAVE_LMB + select HAVE_MEMBLOCK select HAVE_DMA_ATTRS select HAVE_DMA_API_DEBUG select USE_GENERIC_SMP_HELPERS if SMP diff --git a/arch/powerpc/include/asm/abs_addr.h b/arch/powerpc/include/asm/abs_addr.h index 98324c5a828..9a846efe638 100644 --- a/arch/powerpc/include/asm/abs_addr.h +++ b/arch/powerpc/include/asm/abs_addr.h @@ -12,7 +12,7 @@ * 2 of the License, or (at your option) any later version. */ -#include +#include #include #include diff --git a/arch/powerpc/include/asm/lmb.h b/arch/powerpc/include/asm/lmb.h deleted file mode 100644 index 6f5fdf0a19a..00000000000 --- a/arch/powerpc/include/asm/lmb.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef _ASM_POWERPC_LMB_H -#define _ASM_POWERPC_LMB_H - -#include - -#define LMB_DBG(fmt...) udbg_printf(fmt) - -#ifdef CONFIG_PPC32 -extern phys_addr_t lowmem_end_addr; -#define LMB_REAL_LIMIT lowmem_end_addr -#else -#define LMB_REAL_LIMIT 0 -#endif - -#endif /* _ASM_POWERPC_LMB_H */ diff --git a/arch/powerpc/include/asm/memblock.h b/arch/powerpc/include/asm/memblock.h new file mode 100644 index 00000000000..3c29728b56b --- /dev/null +++ b/arch/powerpc/include/asm/memblock.h @@ -0,0 +1,15 @@ +#ifndef _ASM_POWERPC_MEMBLOCK_H +#define _ASM_POWERPC_MEMBLOCK_H + +#include + +#define MEMBLOCK_DBG(fmt...) udbg_printf(fmt) + +#ifdef CONFIG_PPC32 +extern phys_addr_t lowmem_end_addr; +#define MEMBLOCK_REAL_LIMIT lowmem_end_addr +#else +#define MEMBLOCK_REAL_LIMIT 0 +#endif + +#endif /* _ASM_POWERPC_MEMBLOCK_H */ diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c index 26e58630ed7..625942ae558 100644 --- a/arch/powerpc/kernel/btext.c +++ b/arch/powerpc/kernel/btext.c @@ -7,7 +7,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c index 29df48f2b61..417f7b05a9c 100644 --- a/arch/powerpc/kernel/crash.c +++ b/arch/powerpc/kernel/crash.c @@ -24,7 +24,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c index 5fb667a6089..40f524643ba 100644 --- a/arch/powerpc/kernel/crash_dump.c +++ b/arch/powerpc/kernel/crash_dump.c @@ -13,7 +13,7 @@ #include #include -#include +#include #include #include #include @@ -33,7 +33,7 @@ unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX; #ifndef CONFIG_RELOCATABLE void __init reserve_kdump_trampoline(void) { - lmb_reserve(0, KDUMP_RESERVE_LIMIT); + memblock_reserve(0, KDUMP_RESERVE_LIMIT); } static void __init create_trampoline(unsigned long addr) diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c index e7fe218b869..02f724f3675 100644 --- a/arch/powerpc/kernel/dma-swiotlb.c +++ b/arch/powerpc/kernel/dma-swiotlb.c @@ -71,7 +71,7 @@ static int ppc_swiotlb_bus_notify(struct notifier_block *nb, sd->max_direct_dma_addr = 0; /* May need to bounce if the device can't address all of DRAM */ - if ((dma_get_mask(dev) + 1) < lmb_end_of_DRAM()) + if ((dma_get_mask(dev) + 1) < memblock_end_of_DRAM()) set_dma_ops(dev, &swiotlb_dma_ops); return NOTIFY_DONE; diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c index 8d1de6f31d5..84d6367ec00 100644 --- a/arch/powerpc/kernel/dma.c +++ b/arch/powerpc/kernel/dma.c @@ -9,7 +9,7 @@ #include #include #include -#include +#include #include #include @@ -89,7 +89,7 @@ static int dma_direct_dma_supported(struct device *dev, u64 mask) /* Could be improved so platforms can set the limit in case * they have limited DMA windows */ - return mask >= (lmb_end_of_DRAM() - 1); + return mask >= (memblock_end_of_DRAM() - 1); #else return 1; #endif diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c index bb3d893a835..89f005116aa 100644 --- a/arch/powerpc/kernel/machine_kexec.c +++ b/arch/powerpc/kernel/machine_kexec.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include #include #include #include @@ -66,11 +66,11 @@ void __init reserve_crashkernel(void) unsigned long long crash_size, crash_base; int ret; - /* this is necessary because of lmb_phys_mem_size() */ - lmb_analyze(); + /* this is necessary because of memblock_phys_mem_size() */ + memblock_analyze(); /* use common parsing */ - ret = parse_crashkernel(boot_command_line, lmb_phys_mem_size(), + ret = parse_crashkernel(boot_command_line, memblock_phys_mem_size(), &crash_size, &crash_base); if (ret == 0 && crash_size > 0) { crashk_res.start = crash_base; @@ -133,9 +133,9 @@ void __init reserve_crashkernel(void) "for crashkernel (System RAM: %ldMB)\n", (unsigned long)(crash_size >> 20), (unsigned long)(crashk_res.start >> 20), - (unsigned long)(lmb_phys_mem_size() >> 20)); + (unsigned long)(memblock_phys_mem_size() >> 20)); - lmb_reserve(crashk_res.start, crash_size); + memblock_reserve(crashk_res.start, crash_size); } int overlaps_crashkernel(unsigned long start, unsigned long size) diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c index f88acf0218d..139a773853f 100644 --- a/arch/powerpc/kernel/paca.c +++ b/arch/powerpc/kernel/paca.c @@ -9,7 +9,7 @@ #include #include -#include +#include #include #include @@ -117,7 +117,7 @@ void __init allocate_pacas(void) * the first segment. On iSeries they must be within the area mapped * by the HV, which is HvPagesToMap * HVPAGESIZE bytes. */ - limit = min(0x10000000ULL, lmb.rmo_size); + limit = min(0x10000000ULL, memblock.rmo_size); if (firmware_has_feature(FW_FEATURE_ISERIES)) limit = min(limit, HvPagesToMap * HVPAGESIZE); @@ -128,7 +128,7 @@ void __init allocate_pacas(void) paca_size = PAGE_ALIGN(sizeof(struct paca_struct) * nr_cpus); - paca = __va(lmb_alloc_base(paca_size, PAGE_SIZE, limit)); + paca = __va(memblock_alloc_base(paca_size, PAGE_SIZE, limit)); memset(paca, 0, paca_size); printk(KERN_DEBUG "Allocated %u bytes for %d pacas at %p\n", @@ -148,7 +148,7 @@ void __init free_unused_pacas(void) if (new_size >= paca_size) return; - lmb_free(__pa(paca) + new_size, paca_size - new_size); + memblock_free(__pa(paca) + new_size, paca_size - new_size); printk(KERN_DEBUG "Freed %u bytes for unused pacas\n", paca_size - new_size); diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 05131d634e7..9d3953983fb 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -31,7 +31,7 @@ #include #include #include -#include +#include #include #include @@ -98,7 +98,7 @@ static void __init move_device_tree(void) if ((memory_limit && (start + size) > memory_limit) || overlaps_crashkernel(start, size)) { - p = __va(lmb_alloc_base(size, PAGE_SIZE, lmb.rmo_size)); + p = __va(memblock_alloc_base(size, PAGE_SIZE, memblock.rmo_size)); memcpy(p, initial_boot_params, size); initial_boot_params = (struct boot_param_header *)p; DBG("Moved device tree to 0x%p\n", p); @@ -411,13 +411,13 @@ static int __init early_init_dt_scan_drconf_memory(unsigned long node) { __be32 *dm, *ls, *usm; unsigned long l, n, flags; - u64 base, size, lmb_size; + u64 base, size, memblock_size; unsigned int is_kexec_kdump = 0, rngs; - ls = of_get_flat_dt_prop(node, "ibm,lmb-size", &l); + ls = of_get_flat_dt_prop(node, "ibm,memblock-size", &l); if (ls == NULL || l < dt_root_size_cells * sizeof(__be32)) return 0; - lmb_size = dt_mem_next_cell(dt_root_size_cells, &ls); + memblock_size = dt_mem_next_cell(dt_root_size_cells, &ls); dm = of_get_flat_dt_prop(node, "ibm,dynamic-memory", &l); if (dm == NULL || l < sizeof(__be32)) @@ -442,11 +442,11 @@ static int __init early_init_dt_scan_drconf_memory(unsigned long node) or if the block is not assigned to this partition (0x8) */ if ((flags & 0x80) || !(flags & 0x8)) continue; - size = lmb_size; + size = memblock_size; rngs = 1; if (is_kexec_kdump) { /* - * For each lmb in ibm,dynamic-memory, a corresponding + * For each memblock in ibm,dynamic-memory, a corresponding * entry in linux,drconf-usable-memory property contains * a counter 'p' followed by 'p' (base, size) duple. * Now read the counter from @@ -469,10 +469,10 @@ static int __init early_init_dt_scan_drconf_memory(unsigned long node) if ((base + size) > 0x80000000ul) size = 0x80000000ul - base; } - lmb_add(base, size); + memblock_add(base, size); } while (--rngs); } - lmb_dump_all(); + memblock_dump_all(); return 0; } #else @@ -501,14 +501,14 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size) } #endif - lmb_add(base, size); + memblock_add(base, size); memstart_addr = min((u64)memstart_addr, base); } u64 __init early_init_dt_alloc_memory_arch(u64 size, u64 align) { - return lmb_alloc(size, align); + return memblock_alloc(size, align); } #ifdef CONFIG_BLK_DEV_INITRD @@ -534,12 +534,12 @@ static void __init early_reserve_mem(void) /* before we do anything, lets reserve the dt blob */ self_base = __pa((unsigned long)initial_boot_params); self_size = initial_boot_params->totalsize; - lmb_reserve(self_base, self_size); + memblock_reserve(self_base, self_size); #ifdef CONFIG_BLK_DEV_INITRD /* then reserve the initrd, if any */ if (initrd_start && (initrd_end > initrd_start)) - lmb_reserve(__pa(initrd_start), initrd_end - initrd_start); + memblock_reserve(__pa(initrd_start), initrd_end - initrd_start); #endif /* CONFIG_BLK_DEV_INITRD */ #ifdef CONFIG_PPC32 @@ -560,7 +560,7 @@ static void __init early_reserve_mem(void) if (base_32 == self_base && size_32 == self_size) continue; DBG("reserving: %x -> %x\n", base_32, size_32); - lmb_reserve(base_32, size_32); + memblock_reserve(base_32, size_32); } return; } @@ -571,7 +571,7 @@ static void __init early_reserve_mem(void) if (size == 0) break; DBG("reserving: %llx -> %llx\n", base, size); - lmb_reserve(base, size); + memblock_reserve(base, size); } } @@ -594,7 +594,7 @@ static inline unsigned long phyp_dump_calculate_reserve_size(void) return phyp_dump_info->reserve_bootvar; /* divide by 20 to get 5% of value */ - tmp = lmb_end_of_DRAM(); + tmp = memblock_end_of_DRAM(); do_div(tmp, 20); /* round it down in multiples of 256 */ @@ -633,11 +633,11 @@ static void __init phyp_dump_reserve_mem(void) if (phyp_dump_info->phyp_dump_is_active) { /* Reserve *everything* above RMR.Area freed by userland tools*/ base = variable_reserve_size; - size = lmb_end_of_DRAM() - base; + size = memblock_end_of_DRAM() - base; /* XXX crashed_ram_end is wrong, since it may be beyond * the memory_limit, it will need to be adjusted. */ - lmb_reserve(base, size); + memblock_reserve(base, size); phyp_dump_info->init_reserve_start = base; phyp_dump_info->init_reserve_size = size; @@ -645,8 +645,8 @@ static void __init phyp_dump_reserve_mem(void) size = phyp_dump_info->cpu_state_size + phyp_dump_info->hpte_region_size + variable_reserve_size; - base = lmb_end_of_DRAM() - size; - lmb_reserve(base, size); + base = memblock_end_of_DRAM() - size; + memblock_reserve(base, size); phyp_dump_info->init_reserve_start = base; phyp_dump_info->init_reserve_size = size; } @@ -681,8 +681,8 @@ void __init early_init_devtree(void *params) */ of_scan_flat_dt(early_init_dt_scan_chosen, NULL); - /* Scan memory nodes and rebuild LMBs */ - lmb_init(); + /* Scan memory nodes and rebuild MEMBLOCKs */ + memblock_init(); of_scan_flat_dt(early_init_dt_scan_root, NULL); of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL); @@ -690,11 +690,11 @@ void __init early_init_devtree(void *params) strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE); parse_early_param(); - /* Reserve LMB regions used by kernel, initrd, dt, etc... */ - lmb_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START); + /* Reserve MEMBLOCK regions used by kernel, initrd, dt, etc... */ + memblock_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START); /* If relocatable, reserve first 32k for interrupt vectors etc. */ if (PHYSICAL_START > MEMORY_START) - lmb_reserve(MEMORY_START, 0x8000); + memblock_reserve(MEMORY_START, 0x8000); reserve_kdump_trampoline(); reserve_crashkernel(); early_reserve_mem(); @@ -706,17 +706,17 @@ void __init early_init_devtree(void *params) /* Ensure that total memory size is page-aligned, because * otherwise mark_bootmem() gets upset. */ - lmb_analyze(); - memsize = lmb_phys_mem_size(); + memblock_analyze(); + memsize = memblock_phys_mem_size(); if ((memsize & PAGE_MASK) != memsize) limit = memsize & PAGE_MASK; } - lmb_enforce_memory_limit(limit); + memblock_enforce_memory_limit(limit); - lmb_analyze(); - lmb_dump_all(); + memblock_analyze(); + memblock_dump_all(); - DBG("Phys. mem: %llx\n", lmb_phys_mem_size()); + DBG("Phys. mem: %llx\n", memblock_phys_mem_size()); /* We may need to relocate the flat tree, do it now. * FIXME .. and the initrd too? */ diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index 0e1ec6f746f..d0516dbee76 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -22,7 +22,7 @@ #include #include #include -#include +#include #include #include @@ -934,11 +934,11 @@ void __init rtas_initialize(void) */ #ifdef CONFIG_PPC64 if (machine_is(pseries) && firmware_has_feature(FW_FEATURE_LPAR)) { - rtas_region = min(lmb.rmo_size, RTAS_INSTANTIATE_MAX); + rtas_region = min(memblock.rmo_size, RTAS_INSTANTIATE_MAX); ibm_suspend_me_token = rtas_token("ibm,suspend-me"); } #endif - rtas_rmo_buf = lmb_alloc_base(RTAS_RMOBUF_MAX, PAGE_SIZE, rtas_region); + rtas_rmo_buf = memblock_alloc_base(RTAS_RMOBUF_MAX, PAGE_SIZE, rtas_region); #ifdef CONFIG_RTAS_ERROR_LOGGING rtas_last_error_token = rtas_token("rtas-last-error"); diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 5e4d852f640..b7e6c7e193a 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -33,7 +33,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 7d84b210f16..a10ffc85ada 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include #include #include @@ -246,12 +246,12 @@ static void __init irqstack_early_init(void) unsigned int i; /* interrupt stacks must be in lowmem, we get that for free on ppc32 - * as the lmb is limited to lowmem by LMB_REAL_LIMIT */ + * as the memblock is limited to lowmem by MEMBLOCK_REAL_LIMIT */ for_each_possible_cpu(i) { softirq_ctx[i] = (struct thread_info *) - __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE)); + __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE)); hardirq_ctx[i] = (struct thread_info *) - __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE)); + __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE)); } } @@ -261,15 +261,15 @@ static void __init exc_lvl_early_init(void) unsigned int i; /* interrupt stacks must be in lowmem, we get that for free on ppc32 - * as the lmb is limited to lowmem by LMB_REAL_LIMIT */ + * as the memblock is limited to lowmem by MEMBLOCK_REAL_LIMIT */ for_each_possible_cpu(i) { critirq_ctx[i] = (struct thread_info *) - __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE)); + __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE)); #ifdef CONFIG_BOOKE dbgirq_ctx[i] = (struct thread_info *) - __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE)); + __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE)); mcheckirq_ctx[i] = (struct thread_info *) - __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE)); + __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE)); #endif } } diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 643dcac40fc..d135f93cb0f 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -34,7 +34,7 @@ #include #include #include -#include +#include #include #include #include @@ -158,7 +158,7 @@ static void __init setup_paca(struct paca_struct *new_paca) * the CPU that ignores the top 2 bits of the address in real * mode so we can access kernel globals normally provided we * only toy with things in the RMO region. From here, we do - * some early parsing of the device-tree to setup out LMB + * some early parsing of the device-tree to setup out MEMBLOCK * data structures, and allocate & initialize the hash table * and segment tables so we can start running with translation * enabled. @@ -404,7 +404,7 @@ void __init setup_system(void) printk("-----------------------------------------------------\n"); printk("ppc64_pft_size = 0x%llx\n", ppc64_pft_size); - printk("physicalMemorySize = 0x%llx\n", lmb_phys_mem_size()); + printk("physicalMemorySize = 0x%llx\n", memblock_phys_mem_size()); if (ppc64_caches.dline_size != 0x80) printk("ppc64_caches.dcache_line_size = 0x%x\n", ppc64_caches.dline_size); @@ -443,10 +443,10 @@ static void __init irqstack_early_init(void) */ for_each_possible_cpu(i) { softirq_ctx[i] = (struct thread_info *) - __va(lmb_alloc_base(THREAD_SIZE, + __va(memblock_alloc_base(THREAD_SIZE, THREAD_SIZE, limit)); hardirq_ctx[i] = (struct thread_info *) - __va(lmb_alloc_base(THREAD_SIZE, + __va(memblock_alloc_base(THREAD_SIZE, THREAD_SIZE, limit)); } } @@ -458,11 +458,11 @@ static void __init exc_lvl_early_init(void) for_each_possible_cpu(i) { critirq_ctx[i] = (struct thread_info *) - __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE)); + __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE)); dbgirq_ctx[i] = (struct thread_info *) - __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE)); + __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE)); mcheckirq_ctx[i] = (struct thread_info *) - __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE)); + __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE)); } } #else @@ -487,11 +487,11 @@ static void __init emergency_stack_init(void) * bringup, we need to get at them in real mode. This means they * must also be within the RMO region. */ - limit = min(slb0_limit(), lmb.rmo_size); + limit = min(slb0_limit(), memblock.rmo_size); for_each_possible_cpu(i) { unsigned long sp; - sp = lmb_alloc_base(THREAD_SIZE, THREAD_SIZE, limit); + sp = memblock_alloc_base(THREAD_SIZE, THREAD_SIZE, limit); sp += THREAD_SIZE; paca[i].emergency_sp = __va(sp); } diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c index d84d19224a9..13002fe206e 100644 --- a/arch/powerpc/kernel/vdso.c +++ b/arch/powerpc/kernel/vdso.c @@ -22,7 +22,7 @@ #include #include #include -#include +#include #include #include @@ -734,7 +734,7 @@ static int __init vdso_init(void) vdso_data->platform = machine_is(iseries) ? 0x200 : 0x100; if (firmware_has_feature(FW_FEATURE_LPAR)) vdso_data->platform |= 1; - vdso_data->physicalMemorySize = lmb_phys_mem_size(); + vdso_data->physicalMemorySize = memblock_phys_mem_size(); vdso_data->dcache_size = ppc64_caches.dsize; vdso_data->dcache_line_size = ppc64_caches.dline_size; vdso_data->icache_size = ppc64_caches.isize; diff --git a/arch/powerpc/mm/40x_mmu.c b/arch/powerpc/mm/40x_mmu.c index 65abfcfaaa9..1dc2fa5ce1b 100644 --- a/arch/powerpc/mm/40x_mmu.c +++ b/arch/powerpc/mm/40x_mmu.c @@ -135,7 +135,7 @@ unsigned long __init mmu_mapin_ram(unsigned long top) /* If the size of RAM is not an exact power of two, we may not * have covered RAM in its entirety with 16 and 4 MiB * pages. Consequently, restrict the top end of RAM currently - * allocable so that calls to the LMB to allocate PTEs for "tail" + * allocable so that calls to the MEMBLOCK to allocate PTEs for "tail" * coverage with normal-sized pages (or other reasons) do not * attempt to allocate outside the allowed range. */ diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 3ecdcec0a39..98f262de558 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -31,7 +31,7 @@ #include #include #include -#include +#include #include #include @@ -384,8 +384,8 @@ static int __init htab_dt_scan_hugepage_blocks(unsigned long node, printk(KERN_INFO "Huge page(16GB) memory: " "addr = 0x%lX size = 0x%lX pages = %d\n", phys_addr, block_size, expected_pages); - if (phys_addr + (16 * GB) <= lmb_end_of_DRAM()) { - lmb_reserve(phys_addr, block_size * expected_pages); + if (phys_addr + (16 * GB) <= memblock_end_of_DRAM()) { + memblock_reserve(phys_addr, block_size * expected_pages); add_gpage(phys_addr, block_size, expected_pages); } return 0; @@ -458,7 +458,7 @@ static void __init htab_init_page_sizes(void) * and we have at least 1G of RAM at boot */ if (mmu_psize_defs[MMU_PAGE_16M].shift && - lmb_phys_mem_size() >= 0x40000000) + memblock_phys_mem_size() >= 0x40000000) mmu_vmemmap_psize = MMU_PAGE_16M; else if (mmu_psize_defs[MMU_PAGE_64K].shift) mmu_vmemmap_psize = MMU_PAGE_64K; @@ -520,7 +520,7 @@ static unsigned long __init htab_get_table_size(void) return 1UL << ppc64_pft_size; /* round mem_size up to next power of 2 */ - mem_size = lmb_phys_mem_size(); + mem_size = memblock_phys_mem_size(); rnd_mem_size = 1UL << __ilog2(mem_size); if (rnd_mem_size < mem_size) rnd_mem_size <<= 1; @@ -627,7 +627,7 @@ static void __init htab_initialize(void) else limit = 0; - table = lmb_alloc_base(htab_size_bytes, htab_size_bytes, limit); + table = memblock_alloc_base(htab_size_bytes, htab_size_bytes, limit); DBG("Hash table allocated at %lx, size: %lx\n", table, htab_size_bytes); @@ -647,9 +647,9 @@ static void __init htab_initialize(void) prot = pgprot_val(PAGE_KERNEL); #ifdef CONFIG_DEBUG_PAGEALLOC - linear_map_hash_count = lmb_end_of_DRAM() >> PAGE_SHIFT; - linear_map_hash_slots = __va(lmb_alloc_base(linear_map_hash_count, - 1, lmb.rmo_size)); + linear_map_hash_count = memblock_end_of_DRAM() >> PAGE_SHIFT; + linear_map_hash_slots = __va(memblock_alloc_base(linear_map_hash_count, + 1, memblock.rmo_size)); memset(linear_map_hash_slots, 0, linear_map_hash_count); #endif /* CONFIG_DEBUG_PAGEALLOC */ @@ -659,16 +659,16 @@ static void __init htab_initialize(void) */ /* create bolted the linear mapping in the hash table */ - for (i=0; i < lmb.memory.cnt; i++) { - base = (unsigned long)__va(lmb.memory.region[i].base); - size = lmb.memory.region[i].size; + for (i=0; i < memblock.memory.cnt; i++) { + base = (unsigned long)__va(memblock.memory.region[i].base); + size = memblock.memory.region[i].size; DBG("creating mapping for region: %lx..%lx (prot: %lx)\n", base, size, prot); #ifdef CONFIG_U3_DART /* Do not map the DART space. Fortunately, it will be aligned - * in such a way that it will not cross two lmb regions and + * in such a way that it will not cross two memblock regions and * will fit within a single 16Mb page. * The DART space is assumed to be a full 16Mb region even if * we only use 2Mb of that space. We will use more of it later diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c index 767333005eb..6a6975dc265 100644 --- a/arch/powerpc/mm/init_32.c +++ b/arch/powerpc/mm/init_32.c @@ -30,7 +30,7 @@ #include #include #include -#include +#include #include #include @@ -136,17 +136,17 @@ void __init MMU_init(void) /* parse args from command line */ MMU_setup(); - if (lmb.memory.cnt > 1) { + if (memblock.memory.cnt > 1) { #ifndef CONFIG_WII - lmb.memory.cnt = 1; - lmb_analyze(); + memblock.memory.cnt = 1; + memblock_analyze(); printk(KERN_WARNING "Only using first contiguous memory region"); #else wii_memory_fixups(); #endif } - total_lowmem = total_memory = lmb_end_of_DRAM() - memstart_addr; + total_lowmem = total_memory = memblock_end_of_DRAM() - memstart_addr; lowmem_end_addr = memstart_addr + total_lowmem; #ifdef CONFIG_FSL_BOOKE @@ -161,8 +161,8 @@ void __init MMU_init(void) lowmem_end_addr = memstart_addr + total_lowmem; #ifndef CONFIG_HIGHMEM total_memory = total_lowmem; - lmb_enforce_memory_limit(lowmem_end_addr); - lmb_analyze(); + memblock_enforce_memory_limit(lowmem_end_addr); + memblock_analyze(); #endif /* CONFIG_HIGHMEM */ } @@ -200,7 +200,7 @@ void __init *early_get_page(void) if (init_bootmem_done) { p = alloc_bootmem_pages(PAGE_SIZE); } else { - p = __va(lmb_alloc_base(PAGE_SIZE, PAGE_SIZE, + p = __va(memblock_alloc_base(PAGE_SIZE, PAGE_SIZE, __initial_memory_limit_addr)); } return p; diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index e267f223fdf..71f1415e247 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -40,7 +40,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 0f594d774bf..1a84a8d0000 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -32,7 +32,7 @@ #include #include #include -#include +#include #include #include @@ -83,13 +83,13 @@ int page_is_ram(unsigned long pfn) #else unsigned long paddr = (pfn << PAGE_SHIFT); int i; - for (i=0; i < lmb.memory.cnt; i++) { + for (i=0; i < memblock.memory.cnt; i++) { unsigned long base; - base = lmb.memory.region[i].base; + base = memblock.memory.region[i].base; if ((paddr >= base) && - (paddr < (base + lmb.memory.region[i].size))) { + (paddr < (base + memblock.memory.region[i].size))) { return 1; } } @@ -142,14 +142,14 @@ int arch_add_memory(int nid, u64 start, u64 size) /* * walk_memory_resource() needs to make sure there is no holes in a given * memory range. PPC64 does not maintain the memory layout in /proc/iomem. - * Instead it maintains it in lmb.memory structures. Walk through the + * Instead it maintains it in memblock.memory structures. Walk through the * memory regions, find holes and callback for contiguous regions. */ int walk_system_ram_range(unsigned long start_pfn, unsigned long nr_pages, void *arg, int (*func)(unsigned long, unsigned long, void *)) { - struct lmb_property res; + struct memblock_property res; unsigned long pfn, len; u64 end; int ret = -1; @@ -158,7 +158,7 @@ walk_system_ram_range(unsigned long start_pfn, unsigned long nr_pages, res.size = (u64) nr_pages << PAGE_SHIFT; end = res.base + res.size - 1; - while ((res.base < end) && (lmb_find(&res) >= 0)) { + while ((res.base < end) && (memblock_find(&res) >= 0)) { pfn = (unsigned long)(res.base >> PAGE_SHIFT); len = (unsigned long)(res.size >> PAGE_SHIFT); ret = (*func)(pfn, len, arg); @@ -184,8 +184,8 @@ void __init do_init_bootmem(void) unsigned long total_pages; int boot_mapsize; - max_low_pfn = max_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT; - total_pages = (lmb_end_of_DRAM() - memstart_addr) >> PAGE_SHIFT; + max_low_pfn = max_pfn = memblock_end_of_DRAM() >> PAGE_SHIFT; + total_pages = (memblock_end_of_DRAM() - memstart_addr) >> PAGE_SHIFT; #ifdef CONFIG_HIGHMEM total_pages = total_lowmem >> PAGE_SHIFT; max_low_pfn = lowmem_end_addr >> PAGE_SHIFT; @@ -198,16 +198,16 @@ void __init do_init_bootmem(void) */ bootmap_pages = bootmem_bootmap_pages(total_pages); - start = lmb_alloc(bootmap_pages << PAGE_SHIFT, PAGE_SIZE); + start = memblock_alloc(bootmap_pages << PAGE_SHIFT, PAGE_SIZE); min_low_pfn = MEMORY_START >> PAGE_SHIFT; boot_mapsize = init_bootmem_node(NODE_DATA(0), start >> PAGE_SHIFT, min_low_pfn, max_low_pfn); /* Add active regions with valid PFNs */ - for (i = 0; i < lmb.memory.cnt; i++) { + for (i = 0; i < memblock.memory.cnt; i++) { unsigned long start_pfn, end_pfn; - start_pfn = lmb.memory.region[i].base >> PAGE_SHIFT; - end_pfn = start_pfn + lmb_size_pages(&lmb.memory, i); + start_pfn = memblock.memory.region[i].base >> PAGE_SHIFT; + end_pfn = start_pfn + memblock_size_pages(&memblock.memory, i); add_active_range(0, start_pfn, end_pfn); } @@ -218,17 +218,17 @@ void __init do_init_bootmem(void) free_bootmem_with_active_regions(0, lowmem_end_addr >> PAGE_SHIFT); /* reserve the sections we're already using */ - for (i = 0; i < lmb.reserved.cnt; i++) { - unsigned long addr = lmb.reserved.region[i].base + - lmb_size_bytes(&lmb.reserved, i) - 1; + for (i = 0; i < memblock.reserved.cnt; i++) { + unsigned long addr = memblock.reserved.region[i].base + + memblock_size_bytes(&memblock.reserved, i) - 1; if (addr < lowmem_end_addr) - reserve_bootmem(lmb.reserved.region[i].base, - lmb_size_bytes(&lmb.reserved, i), + reserve_bootmem(memblock.reserved.region[i].base, + memblock_size_bytes(&memblock.reserved, i), BOOTMEM_DEFAULT); - else if (lmb.reserved.region[i].base < lowmem_end_addr) { + else if (memblock.reserved.region[i].base < lowmem_end_addr) { unsigned long adjusted_size = lowmem_end_addr - - lmb.reserved.region[i].base; - reserve_bootmem(lmb.reserved.region[i].base, + memblock.reserved.region[i].base; + reserve_bootmem(memblock.reserved.region[i].base, adjusted_size, BOOTMEM_DEFAULT); } } @@ -236,9 +236,9 @@ void __init do_init_bootmem(void) free_bootmem_with_active_regions(0, max_pfn); /* reserve the sections we're already using */ - for (i = 0; i < lmb.reserved.cnt; i++) - reserve_bootmem(lmb.reserved.region[i].base, - lmb_size_bytes(&lmb.reserved, i), + for (i = 0; i < memblock.reserved.cnt; i++) + reserve_bootmem(memblock.reserved.region[i].base, + memblock_size_bytes(&memblock.reserved, i), BOOTMEM_DEFAULT); #endif @@ -251,20 +251,20 @@ void __init do_init_bootmem(void) /* mark pages that don't exist as nosave */ static int __init mark_nonram_nosave(void) { - unsigned long lmb_next_region_start_pfn, - lmb_region_max_pfn; + unsigned long memblock_next_region_start_pfn, + memblock_region_max_pfn; int i; - for (i = 0; i < lmb.memory.cnt - 1; i++) { - lmb_region_max_pfn = - (lmb.memory.region[i].base >> PAGE_SHIFT) + - (lmb.memory.region[i].size >> PAGE_SHIFT); - lmb_next_region_start_pfn = - lmb.memory.region[i+1].base >> PAGE_SHIFT; + for (i = 0; i < memblock.memory.cnt - 1; i++) { + memblock_region_max_pfn = + (memblock.memory.region[i].base >> PAGE_SHIFT) + + (memblock.memory.region[i].size >> PAGE_SHIFT); + memblock_next_region_start_pfn = + memblock.memory.region[i+1].base >> PAGE_SHIFT; - if (lmb_region_max_pfn < lmb_next_region_start_pfn) - register_nosave_region(lmb_region_max_pfn, - lmb_next_region_start_pfn); + if (memblock_region_max_pfn < memblock_next_region_start_pfn) + register_nosave_region(memblock_region_max_pfn, + memblock_next_region_start_pfn); } return 0; @@ -275,8 +275,8 @@ static int __init mark_nonram_nosave(void) */ void __init paging_init(void) { - unsigned long total_ram = lmb_phys_mem_size(); - phys_addr_t top_of_ram = lmb_end_of_DRAM(); + unsigned long total_ram = memblock_phys_mem_size(); + phys_addr_t top_of_ram = memblock_end_of_DRAM(); unsigned long max_zone_pfns[MAX_NR_ZONES]; #ifdef CONFIG_PPC32 @@ -327,7 +327,7 @@ void __init mem_init(void) swiotlb_init(1); #endif - num_physpages = lmb.memory.size >> PAGE_SHIFT; + num_physpages = memblock.memory.size >> PAGE_SHIFT; high_memory = (void *) __va(max_low_pfn * PAGE_SIZE); #ifdef CONFIG_NEED_MULTIPLE_NODES @@ -364,7 +364,7 @@ void __init mem_init(void) highmem_mapnr = lowmem_end_addr >> PAGE_SHIFT; for (pfn = highmem_mapnr; pfn < max_mapnr; ++pfn) { struct page *page = pfn_to_page(pfn); - if (lmb_is_reserved(pfn << PAGE_SHIFT)) + if (memblock_is_reserved(pfn << PAGE_SHIFT)) continue; ClearPageReserved(page); init_page_count(page); diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 80d110635d2..f47364585ec 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -17,7 +17,7 @@ #include #include #include -#include +#include #include #include #include @@ -351,7 +351,7 @@ struct of_drconf_cell { #define DRCONF_MEM_RESERVED 0x00000080 /* - * Read the next lmb list entry from the ibm,dynamic-memory property + * Read the next memblock list entry from the ibm,dynamic-memory property * and return the information in the provided of_drconf_cell structure. */ static void read_drconf_cell(struct of_drconf_cell *drmem, const u32 **cellp) @@ -372,8 +372,8 @@ static void read_drconf_cell(struct of_drconf_cell *drmem, const u32 **cellp) /* * Retreive and validate the ibm,dynamic-memory property of the device tree. * - * The layout of the ibm,dynamic-memory property is a number N of lmb - * list entries followed by N lmb list entries. Each lmb list entry + * The layout of the ibm,dynamic-memory property is a number N of memblock + * list entries followed by N memblock list entries. Each memblock list entry * contains information as layed out in the of_drconf_cell struct above. */ static int of_get_drconf_memory(struct device_node *memory, const u32 **dm) @@ -398,15 +398,15 @@ static int of_get_drconf_memory(struct device_node *memory, const u32 **dm) } /* - * Retreive and validate the ibm,lmb-size property for drconf memory + * Retreive and validate the ibm,memblock-size property for drconf memory * from the device tree. */ -static u64 of_get_lmb_size(struct device_node *memory) +static u64 of_get_memblock_size(struct device_node *memory) { const u32 *prop; u32 len; - prop = of_get_property(memory, "ibm,lmb-size", &len); + prop = of_get_property(memory, "ibm,memblock-size", &len); if (!prop || len < sizeof(unsigned int)) return 0; @@ -540,19 +540,19 @@ static unsigned long __init numa_enforce_memory_limit(unsigned long start, unsigned long size) { /* - * We use lmb_end_of_DRAM() in here instead of memory_limit because + * We use memblock_end_of_DRAM() in here instead of memory_limit because * we've already adjusted it for the limit and it takes care of * having memory holes below the limit. Also, in the case of * iommu_is_off, memory_limit is not set but is implicitly enforced. */ - if (start + size <= lmb_end_of_DRAM()) + if (start + size <= memblock_end_of_DRAM()) return size; - if (start >= lmb_end_of_DRAM()) + if (start >= memblock_end_of_DRAM()) return 0; - return lmb_end_of_DRAM() - start; + return memblock_end_of_DRAM() - start; } /* @@ -562,7 +562,7 @@ static unsigned long __init numa_enforce_memory_limit(unsigned long start, static inline int __init read_usm_ranges(const u32 **usm) { /* - * For each lmb in ibm,dynamic-memory a corresponding + * For each memblock in ibm,dynamic-memory a corresponding * entry in linux,drconf-usable-memory property contains * a counter followed by that many (base, size) duple. * read the counter from linux,drconf-usable-memory @@ -578,7 +578,7 @@ static void __init parse_drconf_memory(struct device_node *memory) { const u32 *dm, *usm; unsigned int n, rc, ranges, is_kexec_kdump = 0; - unsigned long lmb_size, base, size, sz; + unsigned long memblock_size, base, size, sz; int nid; struct assoc_arrays aa; @@ -586,8 +586,8 @@ static void __init parse_drconf_memory(struct device_node *memory) if (!n) return; - lmb_size = of_get_lmb_size(memory); - if (!lmb_size) + memblock_size = of_get_memblock_size(memory); + if (!memblock_size) return; rc = of_get_assoc_arrays(memory, &aa); @@ -611,7 +611,7 @@ static void __init parse_drconf_memory(struct device_node *memory) continue; base = drmem.base_addr; - size = lmb_size; + size = memblock_size; ranges = 1; if (is_kexec_kdump) { @@ -731,7 +731,7 @@ new_range: } /* - * Now do the same thing for each LMB listed in the ibm,dynamic-memory + * Now do the same thing for each MEMBLOCK listed in the ibm,dynamic-memory * property in the ibm,dynamic-reconfiguration-memory node. */ memory = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory"); @@ -743,8 +743,8 @@ new_range: static void __init setup_nonnuma(void) { - unsigned long top_of_ram = lmb_end_of_DRAM(); - unsigned long total_ram = lmb_phys_mem_size(); + unsigned long top_of_ram = memblock_end_of_DRAM(); + unsigned long total_ram = memblock_phys_mem_size(); unsigned long start_pfn, end_pfn; unsigned int i, nid = 0; @@ -753,9 +753,9 @@ static void __init setup_nonnuma(void) printk(KERN_DEBUG "Memory hole size: %ldMB\n", (top_of_ram - total_ram) >> 20); - for (i = 0; i < lmb.memory.cnt; ++i) { - start_pfn = lmb.memory.region[i].base >> PAGE_SHIFT; - end_pfn = start_pfn + lmb_size_pages(&lmb.memory, i); + for (i = 0; i < memblock.memory.cnt; ++i) { + start_pfn = memblock.memory.region[i].base >> PAGE_SHIFT; + end_pfn = start_pfn + memblock_size_pages(&memblock.memory, i); fake_numa_create_new_node(end_pfn, &nid); add_active_range(nid, start_pfn, end_pfn); @@ -813,7 +813,7 @@ static void __init dump_numa_memory_topology(void) count = 0; - for (i = 0; i < lmb_end_of_DRAM(); + for (i = 0; i < memblock_end_of_DRAM(); i += (1 << SECTION_SIZE_BITS)) { if (early_pfn_to_nid(i >> PAGE_SHIFT) == node) { if (count == 0) @@ -833,7 +833,7 @@ static void __init dump_numa_memory_topology(void) } /* - * Allocate some memory, satisfying the lmb or bootmem allocator where + * Allocate some memory, satisfying the memblock or bootmem allocator where * required. nid is the preferred node and end is the physical address of * the highest address in the node. * @@ -847,11 +847,11 @@ static void __init *careful_zallocation(int nid, unsigned long size, int new_nid; unsigned long ret_paddr; - ret_paddr = __lmb_alloc_base(size, align, end_pfn << PAGE_SHIFT); + ret_paddr = __memblock_alloc_base(size, align, end_pfn << PAGE_SHIFT); /* retry over all memory */ if (!ret_paddr) - ret_paddr = __lmb_alloc_base(size, align, lmb_end_of_DRAM()); + ret_paddr = __memblock_alloc_base(size, align, memblock_end_of_DRAM()); if (!ret_paddr) panic("numa.c: cannot allocate %lu bytes for node %d", @@ -861,14 +861,14 @@ static void __init *careful_zallocation(int nid, unsigned long size, /* * We initialize the nodes in numeric order: 0, 1, 2... - * and hand over control from the LMB allocator to the + * and hand over control from the MEMBLOCK allocator to the * bootmem allocator. If this function is called for * node 5, then we know that all nodes <5 are using the - * bootmem allocator instead of the LMB allocator. + * bootmem allocator instead of the MEMBLOCK allocator. * * So, check the nid from which this allocation came * and double check to see if we need to use bootmem - * instead of the LMB. We don't free the LMB memory + * instead of the MEMBLOCK. We don't free the MEMBLOCK memory * since it would be useless. */ new_nid = early_pfn_to_nid(ret_paddr >> PAGE_SHIFT); @@ -893,9 +893,9 @@ static void mark_reserved_regions_for_nid(int nid) struct pglist_data *node = NODE_DATA(nid); int i; - for (i = 0; i < lmb.reserved.cnt; i++) { - unsigned long physbase = lmb.reserved.region[i].base; - unsigned long size = lmb.reserved.region[i].size; + for (i = 0; i < memblock.reserved.cnt; i++) { + unsigned long physbase = memblock.reserved.region[i].base; + unsigned long size = memblock.reserved.region[i].size; unsigned long start_pfn = physbase >> PAGE_SHIFT; unsigned long end_pfn = PFN_UP(physbase + size); struct node_active_region node_ar; @@ -903,7 +903,7 @@ static void mark_reserved_regions_for_nid(int nid) node->node_spanned_pages; /* - * Check to make sure that this lmb.reserved area is + * Check to make sure that this memblock.reserved area is * within the bounds of the node that we care about. * Checking the nid of the start and end points is not * sufficient because the reserved area could span the @@ -961,7 +961,7 @@ void __init do_init_bootmem(void) int nid; min_low_pfn = 0; - max_low_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT; + max_low_pfn = memblock_end_of_DRAM() >> PAGE_SHIFT; max_pfn = max_low_pfn; if (parse_numa_properties()) @@ -1038,7 +1038,7 @@ void __init paging_init(void) { unsigned long max_zone_pfns[MAX_NR_ZONES]; memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); - max_zone_pfns[ZONE_DMA] = lmb_end_of_DRAM() >> PAGE_SHIFT; + max_zone_pfns[ZONE_DMA] = memblock_end_of_DRAM() >> PAGE_SHIFT; free_area_init_nodes(max_zone_pfns); } @@ -1072,7 +1072,7 @@ static int hot_add_drconf_scn_to_nid(struct device_node *memory, { const u32 *dm; unsigned int drconf_cell_cnt, rc; - unsigned long lmb_size; + unsigned long memblock_size; struct assoc_arrays aa; int nid = -1; @@ -1080,8 +1080,8 @@ static int hot_add_drconf_scn_to_nid(struct device_node *memory, if (!drconf_cell_cnt) return -1; - lmb_size = of_get_lmb_size(memory); - if (!lmb_size) + memblock_size = of_get_memblock_size(memory); + if (!memblock_size) return -1; rc = of_get_assoc_arrays(memory, &aa); @@ -1100,7 +1100,7 @@ static int hot_add_drconf_scn_to_nid(struct device_node *memory, continue; if ((scn_addr < drmem.base_addr) - || (scn_addr >= (drmem.base_addr + lmb_size))) + || (scn_addr >= (drmem.base_addr + memblock_size))) continue; nid = of_drconf_to_nid_single(&drmem, &aa); @@ -1113,7 +1113,7 @@ static int hot_add_drconf_scn_to_nid(struct device_node *memory, /* * Find the node associated with a hot added memory section for memory * represented in the device tree as a node (i.e. memory@XXXX) for - * each lmb. + * each memblock. */ int hot_add_node_scn_to_nid(unsigned long scn_addr) { @@ -1154,8 +1154,8 @@ int hot_add_node_scn_to_nid(unsigned long scn_addr) /* * Find the node associated with a hot added memory section. Section - * corresponds to a SPARSEMEM section, not an LMB. It is assumed that - * sections are fully contained within a single LMB. + * corresponds to a SPARSEMEM section, not an MEMBLOCK. It is assumed that + * sections are fully contained within a single MEMBLOCK. */ int hot_add_scn_to_nid(unsigned long scn_addr) { diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c index 34347b2e7e3..a87ead0138b 100644 --- a/arch/powerpc/mm/pgtable_32.c +++ b/arch/powerpc/mm/pgtable_32.c @@ -26,7 +26,7 @@ #include #include #include -#include +#include #include #include @@ -198,7 +198,7 @@ __ioremap_caller(phys_addr_t addr, unsigned long size, unsigned long flags, * mem_init() sets high_memory so only do the check after that. */ if (mem_init_done && (p < virt_to_phys(high_memory)) && - !(__allow_ioremap_reserved && lmb_is_region_reserved(p, size))) { + !(__allow_ioremap_reserved && memblock_is_region_reserved(p, size))) { printk("__ioremap(): phys addr 0x%llx is RAM lr %p\n", (unsigned long long)p, __builtin_return_address(0)); return NULL; @@ -331,7 +331,7 @@ void __init mapin_ram(void) s = mmu_mapin_ram(top); __mapin_ram_chunk(s, top); - top = lmb_end_of_DRAM(); + top = memblock_end_of_DRAM(); s = wii_mmu_mapin_mem2(top); __mapin_ram_chunk(s, top); } diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c index d050fc8d971..21d6dfab794 100644 --- a/arch/powerpc/mm/pgtable_64.c +++ b/arch/powerpc/mm/pgtable_64.c @@ -34,7 +34,7 @@ #include #include #include -#include +#include #include #include @@ -67,7 +67,7 @@ static void *early_alloc_pgtable(unsigned long size) if (init_bootmem_done) pt = __alloc_bootmem(size, size, __pa(MAX_DMA_ADDRESS)); else - pt = __va(lmb_alloc_base(size, size, + pt = __va(memblock_alloc_base(size, size, __pa(MAX_DMA_ADDRESS))); memset(pt, 0, size); diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c index f11c2cdcb0f..f8a01829d64 100644 --- a/arch/powerpc/mm/ppc_mmu_32.c +++ b/arch/powerpc/mm/ppc_mmu_32.c @@ -26,7 +26,7 @@ #include #include #include -#include +#include #include #include @@ -223,7 +223,7 @@ void __init MMU_init_hw(void) * Find some memory for the hash table. */ if ( ppc_md.progress ) ppc_md.progress("hash:find piece", 0x322); - Hash = __va(lmb_alloc_base(Hash_size, Hash_size, + Hash = __va(memblock_alloc_base(Hash_size, Hash_size, __initial_memory_limit_addr)); cacheable_memzero(Hash, Hash_size); _SDR1 = __pa(Hash) | SDR1_LOW_BITS; diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c index 687fddaa24c..446a01842a7 100644 --- a/arch/powerpc/mm/stab.c +++ b/arch/powerpc/mm/stab.c @@ -12,7 +12,7 @@ * 2 of the License, or (at your option) any later version. */ -#include +#include #include #include @@ -252,7 +252,7 @@ void __init stabs_alloc(void) if (cpu == 0) continue; /* stab for CPU 0 is statically allocated */ - newstab = lmb_alloc_base(HW_PAGE_SIZE, HW_PAGE_SIZE, + newstab = memblock_alloc_base(HW_PAGE_SIZE, HW_PAGE_SIZE, 1< #include #include -#include +#include #include #include @@ -426,7 +426,7 @@ static void __early_init_mmu(int boot_cpu) /* Set the global containing the top of the linear mapping * for use by the TLB miss code */ - linear_map_top = lmb_end_of_DRAM(); + linear_map_top = memblock_end_of_DRAM(); /* A sync won't hurt us after mucking around with * the MMU configuration diff --git a/arch/powerpc/platforms/85xx/corenet_ds.c b/arch/powerpc/platforms/85xx/corenet_ds.c index 534c2ecc89d..2ab338c9ac3 100644 --- a/arch/powerpc/platforms/85xx/corenet_ds.c +++ b/arch/powerpc/platforms/85xx/corenet_ds.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include #include #include @@ -100,7 +100,7 @@ void __init corenet_ds_setup_arch(void) #endif #ifdef CONFIG_SWIOTLB - if (lmb_end_of_DRAM() > max) { + if (memblock_end_of_DRAM() > max) { ppc_swiotlb_enable = 1; set_pci_dma_ops(&swiotlb_dma_ops); ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb; diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c index 004b7d36cdb..f79f2f10214 100644 --- a/arch/powerpc/platforms/85xx/mpc8536_ds.c +++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c @@ -17,7 +17,7 @@ #include #include #include -#include +#include #include #include @@ -94,7 +94,7 @@ static void __init mpc8536_ds_setup_arch(void) #endif #ifdef CONFIG_SWIOTLB - if (lmb_end_of_DRAM() > max) { + if (memblock_end_of_DRAM() > max) { ppc_swiotlb_enable = 1; set_pci_dma_ops(&swiotlb_dma_ops); ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb; diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c index 544011a562f..8190bc25bf2 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c @@ -20,7 +20,7 @@ #include #include #include -#include +#include #include #include @@ -190,7 +190,7 @@ static void __init mpc85xx_ds_setup_arch(void) #endif #ifdef CONFIG_SWIOTLB - if (lmb_end_of_DRAM() > max) { + if (memblock_end_of_DRAM() > max) { ppc_swiotlb_enable = 1; set_pci_dma_ops(&swiotlb_dma_ops); ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb; diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index 8fe87fc6148..494513682d7 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -33,7 +33,7 @@ #include #include #include -#include +#include #include #include @@ -325,7 +325,7 @@ static void __init mpc85xx_mds_setup_arch(void) #endif /* CONFIG_QUICC_ENGINE */ #ifdef CONFIG_SWIOTLB - if (lmb_end_of_DRAM() > max) { + if (memblock_end_of_DRAM() > max) { ppc_swiotlb_enable = 1; set_pci_dma_ops(&swiotlb_dma_ops); ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb; diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c index 2aa69a69bcc..b11c3535f35 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c @@ -19,7 +19,7 @@ #include #include #include -#include +#include #include #include @@ -103,7 +103,7 @@ mpc86xx_hpcn_setup_arch(void) #endif #ifdef CONFIG_SWIOTLB - if (lmb_end_of_DRAM() > max) { + if (memblock_end_of_DRAM() > max) { ppc_swiotlb_enable = 1; set_pci_dma_ops(&swiotlb_dma_ops); ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb; diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index 4326b737d91..3712900471b 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -29,7 +29,7 @@ #include #include #include -#include +#include #include #include @@ -845,10 +845,10 @@ static int __init cell_iommu_init_disabled(void) /* If we found a DMA window, we check if it's big enough to enclose * all of physical memory. If not, we force enable IOMMU */ - if (np && size < lmb_end_of_DRAM()) { + if (np && size < memblock_end_of_DRAM()) { printk(KERN_WARNING "iommu: force-enabled, dma window" " (%ldMB) smaller than total memory (%lldMB)\n", - size >> 20, lmb_end_of_DRAM() >> 20); + size >> 20, memblock_end_of_DRAM() >> 20); return -ENODEV; } @@ -1064,7 +1064,7 @@ static int __init cell_iommu_fixed_mapping_init(void) } fbase = _ALIGN_UP(fbase, 1 << IO_SEGMENT_SHIFT); - fsize = lmb_phys_mem_size(); + fsize = memblock_phys_mem_size(); if ((fbase + fsize) <= 0x800000000ul) hbase = 0; /* use the device tree window */ @@ -1169,7 +1169,7 @@ static int __init cell_iommu_init(void) * Note: should we make sure we have the IOMMU actually disabled ? */ if (iommu_is_off || - (!iommu_force_on && lmb_end_of_DRAM() <= 0x80000000ull)) + (!iommu_force_on && memblock_end_of_DRAM() <= 0x80000000ull)) if (cell_iommu_init_disabled() == 0) goto bail; diff --git a/arch/powerpc/platforms/embedded6xx/wii.c b/arch/powerpc/platforms/embedded6xx/wii.c index 174a04ac480..5cdcc7c8d97 100644 --- a/arch/powerpc/platforms/embedded6xx/wii.c +++ b/arch/powerpc/platforms/embedded6xx/wii.c @@ -20,7 +20,7 @@ #include #include #include -#include +#include #include #include @@ -65,7 +65,7 @@ static int __init page_aligned(unsigned long x) void __init wii_memory_fixups(void) { - struct lmb_property *p = lmb.memory.region; + struct memblock_property *p = memblock.memory.region; /* * This is part of a workaround to allow the use of two @@ -77,7 +77,7 @@ void __init wii_memory_fixups(void) * between both ranges. */ - BUG_ON(lmb.memory.cnt != 2); + BUG_ON(memblock.memory.cnt != 2); BUG_ON(!page_aligned(p[0].base) || !page_aligned(p[1].base)); p[0].size = _ALIGN_DOWN(p[0].size, PAGE_SIZE); @@ -92,11 +92,11 @@ void __init wii_memory_fixups(void) p[0].size += wii_hole_size + p[1].size; - lmb.memory.cnt = 1; - lmb_analyze(); + memblock.memory.cnt = 1; + memblock_analyze(); /* reserve the hole */ - lmb_reserve(wii_hole_start, wii_hole_size); + memblock_reserve(wii_hole_start, wii_hole_size); /* allow ioremapping the address space in the hole */ __allow_ioremap_reserved = 1; diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c index 39df70529d2..3fff8d979b4 100644 --- a/arch/powerpc/platforms/maple/setup.c +++ b/arch/powerpc/platforms/maple/setup.c @@ -41,7 +41,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c index 7b1d608ea3c..1f9fb2c5776 100644 --- a/arch/powerpc/platforms/pasemi/iommu.c +++ b/arch/powerpc/platforms/pasemi/iommu.c @@ -204,7 +204,7 @@ int __init iob_init(struct device_node *dn) pr_debug(" -> %s\n", __func__); /* Allocate a spare page to map all invalid IOTLB pages. */ - tmp = lmb_alloc(IOBMAP_PAGE_SIZE, IOBMAP_PAGE_SIZE); + tmp = memblock_alloc(IOBMAP_PAGE_SIZE, IOBMAP_PAGE_SIZE); if (!tmp) panic("IOBMAP: Cannot allocate spare page!"); /* Empty l1 is marked invalid */ @@ -275,7 +275,7 @@ void __init alloc_iobmap_l2(void) return; #endif /* For 2G space, 8x64 pages (2^21 bytes) is max total l2 size */ - iob_l2_base = (u32 *)abs_to_virt(lmb_alloc_base(1UL<<21, 1UL<<21, 0x80000000)); + iob_l2_base = (u32 *)abs_to_virt(memblock_alloc_base(1UL<<21, 1UL<<21, 0x80000000)); printk(KERN_INFO "IOBMAP L2 allocated at: %p\n", iob_l2_base); } diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index f1d0132ebcc..9deb274841f 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -51,7 +51,7 @@ #include #include #include -#include +#include #include #include @@ -619,7 +619,7 @@ static int __init pmac_probe(void) * driver needs that. We have to allocate it now. We allocate 4k * (1 small page) for now. */ - smu_cmdbuf_abs = lmb_alloc_base(4096, 4096, 0x80000000UL); + smu_cmdbuf_abs = memblock_alloc_base(4096, 4096, 0x80000000UL); #endif /* CONFIG_PMAC_SMU */ return 1; diff --git a/arch/powerpc/platforms/ps3/htab.c b/arch/powerpc/platforms/ps3/htab.c index 1e8a1e39dfe..2c0ed87f202 100644 --- a/arch/powerpc/platforms/ps3/htab.c +++ b/arch/powerpc/platforms/ps3/htab.c @@ -19,7 +19,7 @@ */ #include -#include +#include #include #include diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c index 7925751e464..c2045880e67 100644 --- a/arch/powerpc/platforms/ps3/mm.c +++ b/arch/powerpc/platforms/ps3/mm.c @@ -21,7 +21,7 @@ #include #include #include -#include +#include #include #include @@ -318,8 +318,8 @@ static int __init ps3_mm_add_memory(void) return result; } - lmb_add(start_addr, map.r1.size); - lmb_analyze(); + memblock_add(start_addr, map.r1.size); + memblock_analyze(); result = online_pages(start_pfn, nr_pages); diff --git a/arch/powerpc/platforms/ps3/os-area.c b/arch/powerpc/platforms/ps3/os-area.c index dd521a181f2..5b759b66959 100644 --- a/arch/powerpc/platforms/ps3/os-area.c +++ b/arch/powerpc/platforms/ps3/os-area.c @@ -24,7 +24,7 @@ #include #include #include -#include +#include #include #include @@ -723,7 +723,7 @@ static void os_area_queue_work(void) * flash to a high address in the boot memory region and then puts that RAM * address and the byte count into the repository for retrieval by the guest. * We copy the data we want into a static variable and allow the memory setup - * by the HV to be claimed by the lmb manager. + * by the HV to be claimed by the memblock manager. * * The os area mirror will not be available to a second stage kernel, and * the header verify will fail. In this case, the saved_params values will diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c index 01e7b5bb3c1..deab5f94609 100644 --- a/arch/powerpc/platforms/pseries/hotplug-memory.c +++ b/arch/powerpc/platforms/pseries/hotplug-memory.c @@ -10,14 +10,14 @@ */ #include -#include +#include #include #include #include #include #include -static int pseries_remove_lmb(unsigned long base, unsigned int lmb_size) +static int pseries_remove_memblock(unsigned long base, unsigned int memblock_size) { unsigned long start, start_pfn; struct zone *zone; @@ -26,7 +26,7 @@ static int pseries_remove_lmb(unsigned long base, unsigned int lmb_size) start_pfn = base >> PAGE_SHIFT; if (!pfn_valid(start_pfn)) { - lmb_remove(base, lmb_size); + memblock_remove(base, memblock_size); return 0; } @@ -41,20 +41,20 @@ static int pseries_remove_lmb(unsigned long base, unsigned int lmb_size) * to sysfs "state" file and we can't remove sysfs entries * while writing to it. So we have to defer it to here. */ - ret = __remove_pages(zone, start_pfn, lmb_size >> PAGE_SHIFT); + ret = __remove_pages(zone, start_pfn, memblock_size >> PAGE_SHIFT); if (ret) return ret; /* * Update memory regions for memory remove */ - lmb_remove(base, lmb_size); + memblock_remove(base, memblock_size); /* * Remove htab bolted mappings for this section of memory */ start = (unsigned long)__va(base); - ret = remove_section_mapping(start, start + lmb_size); + ret = remove_section_mapping(start, start + memblock_size); /* Ensure all vmalloc mappings are flushed in case they also * hit that section of memory @@ -69,7 +69,7 @@ static int pseries_remove_memory(struct device_node *np) const char *type; const unsigned int *regs; unsigned long base; - unsigned int lmb_size; + unsigned int memblock_size; int ret = -EINVAL; /* @@ -80,16 +80,16 @@ static int pseries_remove_memory(struct device_node *np) return 0; /* - * Find the bae address and size of the lmb + * Find the bae address and size of the memblock */ regs = of_get_property(np, "reg", NULL); if (!regs) return ret; base = *(unsigned long *)regs; - lmb_size = regs[3]; + memblock_size = regs[3]; - ret = pseries_remove_lmb(base, lmb_size); + ret = pseries_remove_memblock(base, memblock_size); return ret; } @@ -98,7 +98,7 @@ static int pseries_add_memory(struct device_node *np) const char *type; const unsigned int *regs; unsigned long base; - unsigned int lmb_size; + unsigned int memblock_size; int ret = -EINVAL; /* @@ -109,43 +109,43 @@ static int pseries_add_memory(struct device_node *np) return 0; /* - * Find the base and size of the lmb + * Find the base and size of the memblock */ regs = of_get_property(np, "reg", NULL); if (!regs) return ret; base = *(unsigned long *)regs; - lmb_size = regs[3]; + memblock_size = regs[3]; /* * Update memory region to represent the memory add */ - ret = lmb_add(base, lmb_size); + ret = memblock_add(base, memblock_size); return (ret < 0) ? -EINVAL : 0; } static int pseries_drconf_memory(unsigned long *base, unsigned int action) { struct device_node *np; - const unsigned long *lmb_size; + const unsigned long *memblock_size; int rc; np = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory"); if (!np) return -EINVAL; - lmb_size = of_get_property(np, "ibm,lmb-size", NULL); - if (!lmb_size) { + memblock_size = of_get_property(np, "ibm,memblock-size", NULL); + if (!memblock_size) { of_node_put(np); return -EINVAL; } if (action == PSERIES_DRCONF_MEM_ADD) { - rc = lmb_add(*base, *lmb_size); + rc = memblock_add(*base, *memblock_size); rc = (rc < 0) ? -EINVAL : 0; } else if (action == PSERIES_DRCONF_MEM_REMOVE) { - rc = pseries_remove_lmb(*base, *lmb_size); + rc = pseries_remove_memblock(*base, *memblock_size); } else { rc = -EINVAL; } diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index d26182d42cb..395848e30c5 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -66,7 +66,7 @@ static int tce_build_pSeries(struct iommu_table *tbl, long index, tcep = ((u64 *)tbl->it_base) + index; while (npages--) { - /* can't move this out since we might cross LMB boundary */ + /* can't move this out since we might cross MEMBLOCK boundary */ rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT; *tcep = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT; diff --git a/arch/powerpc/platforms/pseries/phyp_dump.c b/arch/powerpc/platforms/pseries/phyp_dump.c index 7ebd9e88d36..6e7742da007 100644 --- a/arch/powerpc/platforms/pseries/phyp_dump.c +++ b/arch/powerpc/platforms/pseries/phyp_dump.c @@ -255,12 +255,12 @@ void invalidate_last_dump(struct phyp_dump_header *ph, unsigned long addr) /* ------------------------------------------------- */ /** - * release_memory_range -- release memory previously lmb_reserved + * release_memory_range -- release memory previously memblock_reserved * @start_pfn: starting physical frame number * @nr_pages: number of pages to free. * * This routine will release memory that had been previously - * lmb_reserved in early boot. The released memory becomes + * memblock_reserved in early boot. The released memory becomes * available for genreal use. */ static void release_memory_range(unsigned long start_pfn, diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c index c8b96ed7c01..559db2b846a 100644 --- a/arch/powerpc/sysdev/dart_iommu.c +++ b/arch/powerpc/sysdev/dart_iommu.c @@ -36,7 +36,7 @@ #include #include #include -#include +#include #include #include #include @@ -232,7 +232,7 @@ static int __init dart_init(struct device_node *dart_node) * that to work around what looks like a problem with the HT bridge * prefetching into invalid pages and corrupting data */ - tmp = lmb_alloc(DART_PAGE_SIZE, DART_PAGE_SIZE); + tmp = memblock_alloc(DART_PAGE_SIZE, DART_PAGE_SIZE); dart_emptyval = DARTMAP_VALID | ((tmp >> DART_PAGE_SHIFT) & DARTMAP_RPNMASK); @@ -407,7 +407,7 @@ void __init alloc_dart_table(void) if (iommu_is_off) return; - if (!iommu_force_on && lmb_end_of_DRAM() <= 0x40000000ull) + if (!iommu_force_on && memblock_end_of_DRAM() <= 0x40000000ull) return; /* 512 pages (2MB) is max DART tablesize. */ @@ -416,7 +416,7 @@ void __init alloc_dart_table(void) * will blow up an entire large page anyway in the kernel mapping */ dart_tablebase = (unsigned long) - abs_to_virt(lmb_alloc_base(1UL<<24, 1UL<<24, 0x80000000L)); + abs_to_virt(memblock_alloc_base(1UL<<24, 1UL<<24, 0x80000000L)); printk(KERN_INFO "DART table allocated at: %lx\n", dart_tablebase); } diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index a14760fe513..356c6a0e1b2 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -23,7 +23,7 @@ #include #include #include -#include +#include #include #include @@ -190,7 +190,7 @@ static void __init setup_pci_atmu(struct pci_controller *hose, pr_info("%s: PCICSRBAR @ 0x%x\n", name, pcicsrbar); /* Setup inbound mem window */ - mem = lmb_end_of_DRAM(); + mem = memblock_end_of_DRAM(); sz = min(mem, paddr_lo); mem_log = __ilog2_u64(sz); -- cgit v1.2.3-18-g5258 From 1044ea8cfd67dc70f87999906bc2849eef7b053a Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Fri, 30 Apr 2010 10:30:47 +0000 Subject: powerpc/512x: Group mpc512x board's selection menu Allow board selection in a drop-down board sub-menu like many other platforms do. Before the patch: ... [ ] Freescale MPC5121E ADS [ ] Generic support for simple MPC5121 based boards [ ] 52xx-based boards ... Patched: ... [*] 512x-based boards [ ] Freescale MPC5121E ADS [ ] Generic support for simple MPC5121 based boards [ ] 52xx-based boards ... This is a cleanup before adding new board selection entry. Signed-off-by: Anatolij Gustschin Signed-off-by: Grant Likely --- arch/powerpc/platforms/512x/Kconfig | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig index 4dac9b0525a..e9dca280a4d 100644 --- a/arch/powerpc/platforms/512x/Kconfig +++ b/arch/powerpc/platforms/512x/Kconfig @@ -1,29 +1,24 @@ config PPC_MPC512x - bool + bool "512x-based boards" + depends on 6xx select FSL_SOC select IPIC select PPC_CLOCK select PPC_PCI_CHOICE select FSL_PCI if PCI -config PPC_MPC5121 - bool - select PPC_MPC512x - config MPC5121_ADS bool "Freescale MPC5121E ADS" - depends on 6xx + depends on PPC_MPC512x select DEFAULT_UIMAGE - select PPC_MPC5121 select MPC5121_ADS_CPLD help This option enables support for the MPC5121E ADS board. config MPC5121_GENERIC bool "Generic support for simple MPC5121 based boards" - depends on 6xx + depends on PPC_MPC512x select DEFAULT_UIMAGE - select PPC_MPC5121 help This option enables support for simple MPC5121 based boards which do not need custom platform specific setup. -- cgit v1.2.3-18-g5258 From 12fb0eb4c963452f727752aae03bbef192abed40 Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Tue, 27 Jul 2010 11:26:02 +0000 Subject: powerpc/5121: add initial support for PDM360NG board Adds IFM PDM360NG device tree and platform code. Currently following is supported: - Spansion S29GL512P 256 MB NOR flash - ST Micro NAND 1 GiB flash - DIU, please use "fbcon=map:5 video=fslfb:800x480-32@60" at the kernel command line to enable PrimeView PM070WL3 Display support. - FEC - I2C - RTC, EEPROM - MSCAN - PSC UART, please pass "console=tty0 console=ttyPSC5,115200" on the kernel command line. - SPI, ADS7845 Touchscreen - USB0/1 Host - USB0 OTG Host/Device - VIU, Overlay/Capture support Signed-off-by: Markus Fischer Signed-off-by: Wolfgang Grandegger Signed-off-by: Michael Weiss Signed-off-by: Detlev Zundel Signed-off-by: Anatolij Gustschin Signed-off-by: Grant Likely --- arch/powerpc/boot/dts/pdm360ng.dts | 410 +++++++++++++++++++++++++++++++++ arch/powerpc/platforms/512x/Kconfig | 7 + arch/powerpc/platforms/512x/Makefile | 1 + arch/powerpc/platforms/512x/pdm360ng.c | 129 +++++++++++ 4 files changed, 547 insertions(+) create mode 100644 arch/powerpc/boot/dts/pdm360ng.dts create mode 100644 arch/powerpc/platforms/512x/pdm360ng.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/pdm360ng.dts b/arch/powerpc/boot/dts/pdm360ng.dts new file mode 100644 index 00000000000..94dfa5c9a7f --- /dev/null +++ b/arch/powerpc/boot/dts/pdm360ng.dts @@ -0,0 +1,410 @@ +/* + * Device Tree Source for IFM PDM360NG. + * + * Copyright 2009 - 2010 DENX Software Engineering. + * Anatolij Gustschin + * + * Based on MPC5121E ADS dts. + * Copyright 2008 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "pdm360ng"; + compatible = "ifm,pdm360ng"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&ipic>; + + aliases { + ethernet0 = ð0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5121@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <0x20>; // 32 bytes + i-cache-line-size = <0x20>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <49500000>;// 49.5 MHz (csb/4) + bus-frequency = <198000000>; // 198 MHz csb bus + clock-frequency = <396000000>; // 396 MHz ppc core + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; // 512MB at 0 + }; + + nfc@40000000 { + compatible = "fsl,mpc5121-nfc"; + reg = <0x40000000 0x100000>; + interrupts = <0x6 0x8>; + #address-cells = <0x1>; + #size-cells = <0x1>; + bank-width = <0x1>; + chips = <0x1>; + + partition@0 { + label = "nand0"; + reg = <0x0 0x40000000>; + }; + }; + + sram@50000000 { + compatible = "fsl,mpc5121-sram"; + reg = <0x50000000 0x20000>; // 128K at 0x50000000 + }; + + localbus@80000020 { + compatible = "fsl,mpc5121-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0x80000020 0x40>; + + ranges = <0x0 0x0 0xf0000000 0x10000000 /* Flash */ + 0x2 0x0 0x50040000 0x00020000>; /* CS2: MRAM */ + + flash@0,0 { + compatible = "amd,s29gl01gp", "cfi-flash"; + reg = <0 0x00000000 0x08000000 + 0 0x08000000 0x08000000>; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <4>; + device-width = <2>; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x00080000>; + read-only; + }; + partition@80000 { + label = "environment"; + reg = <0x00080000 0x00080000>; + read-only; + }; + partition@100000 { + label = "splash-image"; + reg = <0x00100000 0x00080000>; + read-only; + }; + partition@180000 { + label = "device-tree"; + reg = <0x00180000 0x00040000>; + }; + partition@1c0000 { + label = "kernel"; + reg = <0x001c0000 0x00500000>; + }; + partition@6c0000 { + label = "filesystem"; + reg = <0x006c0000 0x07940000>; + }; + }; + + mram0@2,0 { + compatible = "mtd-ram"; + reg = <2 0x00000 0x10000>; + bank-width = <2>; + }; + + mram1@2,10000 { + compatible = "mtd-ram"; + reg = <2 0x010000 0x10000>; + bank-width = <2>; + }; + }; + + soc@80000000 { + compatible = "fsl,mpc5121-immr"; + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + ranges = <0x0 0x80000000 0x400000>; + reg = <0x80000000 0x400000>; + bus-frequency = <66000000>; // 66 MHz ips bus + + // IPIC + // interrupts cell = + // sense values match linux IORESOURCE_IRQ_* defines: + // sense == 8: Level, low assertion + // sense == 2: Edge, high-to-low change + // + ipic: interrupt-controller@c00 { + compatible = "fsl,mpc5121-ipic", "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0xc00 0x100>; + }; + + rtc@a00 { // Real time clock + compatible = "fsl,mpc5121-rtc"; + reg = <0xa00 0x100>; + interrupts = <79 0x8 80 0x8>; + }; + + reset@e00 { // Reset module + compatible = "fsl,mpc5121-reset"; + reg = <0xe00 0x100>; + }; + + clock@f00 { // Clock control + compatible = "fsl,mpc5121-clock"; + reg = <0xf00 0x100>; + }; + + pmc@1000{ //Power Management Controller + compatible = "fsl,mpc5121-pmc"; + reg = <0x1000 0x100>; + interrupts = <83 0x2>; + }; + + gpio@1100 { + compatible = "fsl,mpc5121-gpio"; + reg = <0x1100 0x100>; + interrupts = <78 0x8>; + }; + + can@1300 { + compatible = "fsl,mpc5121-mscan"; + interrupts = <12 0x8>; + reg = <0x1300 0x80>; + }; + + can@1380 { + compatible = "fsl,mpc5121-mscan"; + interrupts = <13 0x8>; + reg = <0x1380 0x80>; + }; + + i2c@1700 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5121-i2c"; + reg = <0x1700 0x20>; + interrupts = <0x9 0x8>; + fsl,preserve-clocking; + + eeprom@50 { + compatible = "at,24c01"; + reg = <0x50>; + }; + + rtc@68 { + compatible = "stm,m41t00"; + reg = <0x68>; + }; + }; + + i2c@1740 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5121-i2c"; + reg = <0x1740 0x20>; + interrupts = <0xb 0x8>; + fsl,preserve-clocking; + }; + + i2ccontrol@1760 { + compatible = "fsl,mpc5121-i2c-ctrl"; + reg = <0x1760 0x8>; + }; + + axe@2000 { + compatible = "fsl,mpc5121-axe"; + reg = <0x2000 0x100>; + interrupts = <42 0x8>; + }; + + display@2100 { + compatible = "fsl,mpc5121-diu"; + reg = <0x2100 0x100>; + interrupts = <64 0x8>; + }; + + can@2300 { + compatible = "fsl,mpc5121-mscan"; + interrupts = <90 0x8>; + reg = <0x2300 0x80>; + }; + + can@2380 { + compatible = "fsl,mpc5121-mscan"; + interrupts = <91 0x8>; + reg = <0x2380 0x80>; + }; + + viu@2400 { + compatible = "fsl,mpc5121-viu"; + reg = <0x2400 0x400>; + interrupts = <67 0x8>; + }; + + mdio@2800 { + compatible = "fsl,mpc5121-fec-mdio"; + reg = <0x2800 0x200>; + #address-cells = <1>; + #size-cells = <0>; + phy: ethernet-phy@0 { + compatible = "smsc,lan8700"; + reg = <0x1f>; + }; + }; + + eth0: ethernet@2800 { + compatible = "fsl,mpc5121-fec"; + reg = <0x2800 0x200>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <4 0x8>; + phy-handle = < &phy >; + }; + + // USB1 using external ULPI PHY + usb@3000 { + compatible = "fsl,mpc5121-usb2-dr"; + reg = <0x3000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <43 0x8>; + dr_mode = "host"; + phy_type = "ulpi"; + }; + + // USB0 using internal UTMI PHY + usb@4000 { + compatible = "fsl,mpc5121-usb2-dr"; + reg = <0x4000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <44 0x8>; + dr_mode = "otg"; + phy_type = "utmi_wide"; + fsl,invert-pwr-fault; + }; + + // IO control + ioctl@a000 { + compatible = "fsl,mpc5121-ioctl"; + reg = <0xA000 0x1000>; + }; + + // 512x PSCs are not 52xx PSCs compatible + serial@11000 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + cell-index = <0>; + reg = <0x11000 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + serial@11100 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + cell-index = <1>; + reg = <0x11100 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + serial@11200 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + cell-index = <2>; + reg = <0x11200 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + serial@11300 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + cell-index = <3>; + reg = <0x11300 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + serial@11400 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + cell-index = <4>; + reg = <0x11400 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + serial@11600 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + cell-index = <6>; + reg = <0x11600 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + serial@11800 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + cell-index = <8>; + reg = <0x11800 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + serial@11B00 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + cell-index = <11>; + reg = <0x11B00 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + }; + + pscfifo@11f00 { + compatible = "fsl,mpc5121-psc-fifo"; + reg = <0x11f00 0x100>; + interrupts = <40 0x8>; + }; + + spi@11900 { + compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc"; + cell-index = <9>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x11900 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + + // 7845 touch screen controller + ts@0 { + compatible = "ti,ads7846"; + reg = <0x0>; + spi-max-frequency = <3000000>; + // pen irq is GPIO25 + interrupts = <78 0x8>; + }; + }; + + dma@14000 { + compatible = "fsl,mpc5121-dma"; + reg = <0x14000 0x1800>; + interrupts = <65 0x8>; + }; + }; +}; diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig index e9dca280a4d..27b0651221d 100644 --- a/arch/powerpc/platforms/512x/Kconfig +++ b/arch/powerpc/platforms/512x/Kconfig @@ -25,3 +25,10 @@ config MPC5121_GENERIC Compatible boards include: Protonic LVT base boards (ZANMCU and VICVT2). + +config PDM360NG + bool "ifm PDM360NG board" + depends on PPC_MPC512x + select DEFAULT_UIMAGE + help + This option enables support for the PDM360NG board. diff --git a/arch/powerpc/platforms/512x/Makefile b/arch/powerpc/platforms/512x/Makefile index 90be2f5717e..4efc1c4b6fb 100644 --- a/arch/powerpc/platforms/512x/Makefile +++ b/arch/powerpc/platforms/512x/Makefile @@ -4,3 +4,4 @@ obj-y += clock.o mpc512x_shared.o obj-$(CONFIG_MPC5121_ADS) += mpc5121_ads.o mpc5121_ads_cpld.o obj-$(CONFIG_MPC5121_GENERIC) += mpc5121_generic.o +obj-$(CONFIG_PDM360NG) += pdm360ng.o diff --git a/arch/powerpc/platforms/512x/pdm360ng.c b/arch/powerpc/platforms/512x/pdm360ng.c new file mode 100644 index 00000000000..0575e858291 --- /dev/null +++ b/arch/powerpc/platforms/512x/pdm360ng.c @@ -0,0 +1,129 @@ +/* + * Copyright (C) 2010 DENX Software Engineering + * + * Anatolij Gustschin, + * + * PDM360NG board setup + * + * This is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include +#include +#include + +#include +#include + +#include "mpc512x.h" + +#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ + defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) +#include +#include +#include +#include + +static void *pdm360ng_gpio_base; + +static int pdm360ng_get_pendown_state(void) +{ + u32 reg; + + reg = in_be32(pdm360ng_gpio_base + 0xc); + if (reg & 0x40) + setbits32(pdm360ng_gpio_base + 0xc, 0x40); + + reg = in_be32(pdm360ng_gpio_base + 0x8); + + /* return 1 if pen is down */ + return (reg & 0x40) == 0; +} + +static struct ads7846_platform_data pdm360ng_ads7846_pdata = { + .model = 7845, + .get_pendown_state = pdm360ng_get_pendown_state, + .irq_flags = IRQF_TRIGGER_LOW, +}; + +static int __init pdm360ng_penirq_init(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-gpio"); + if (!np) { + pr_err("%s: Can't find 'mpc5121-gpio' node\n", __func__); + return -ENODEV; + } + + pdm360ng_gpio_base = of_iomap(np, 0); + of_node_put(np); + if (!pdm360ng_gpio_base) { + pr_err("%s: Can't map gpio regs.\n", __func__); + return -ENODEV; + } + out_be32(pdm360ng_gpio_base + 0xc, 0xffffffff); + setbits32(pdm360ng_gpio_base + 0x18, 0x2000); + setbits32(pdm360ng_gpio_base + 0x10, 0x40); + + return 0; +} + +static int pdm360ng_touchscreen_notifier_call(struct notifier_block *nb, + unsigned long event, void *__dev) +{ + struct device *dev = __dev; + + if ((event == BUS_NOTIFY_ADD_DEVICE) && + of_device_is_compatible(dev->of_node, "ti,ads7846")) { + dev->platform_data = &pdm360ng_ads7846_pdata; + return NOTIFY_OK; + } + return NOTIFY_DONE; +} + +static struct notifier_block pdm360ng_touchscreen_nb = { + .notifier_call = pdm360ng_touchscreen_notifier_call, +}; + +static void __init pdm360ng_touchscreen_init(void) +{ + if (pdm360ng_penirq_init()) + return; + + bus_register_notifier(&spi_bus_type, &pdm360ng_touchscreen_nb); +} +#else +static inline void __init pdm360ng_touchscreen_init(void) +{ +} +#endif /* CONFIG_TOUCHSCREEN_ADS7846 */ + +void __init pdm360ng_init(void) +{ + mpc512x_init(); + pdm360ng_touchscreen_init(); +} + +static int __init pdm360ng_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "ifm,pdm360ng"); +} + +define_machine(pdm360ng) { + .name = "PDM360NG", + .probe = pdm360ng_probe, + .setup_arch = mpc512x_setup_diu, + .init = pdm360ng_init, + .init_early = mpc512x_init_diu, + .init_IRQ = mpc512x_init_IRQ, + .get_irq = ipic_get_irq, + .calibrate_decr = generic_calibrate_decr, + .restart = mpc512x_restart, +}; -- cgit v1.2.3-18-g5258 From 9e2089cbed7441a21d72a510897f0336afb06492 Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Fri, 23 Jul 2010 03:50:18 +0000 Subject: powerpc/512x: add clock structure for Video-IN (VIU) unit Allows using clk_get()/clk_enable()/clk_disable() for VIU clock in the v4l2 video driver. Signed-off-by: Hongjun Chen Signed-off-by: Anatolij Gustschin Signed-off-by: Grant Likely --- arch/powerpc/platforms/512x/clock.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/512x/clock.c b/arch/powerpc/platforms/512x/clock.c index 4c42246b86a..e1c5cd6650b 100644 --- a/arch/powerpc/platforms/512x/clock.c +++ b/arch/powerpc/platforms/512x/clock.c @@ -292,6 +292,15 @@ static void diu_clk_calc(struct clk *clk) clk->rate = rate; } +static void viu_clk_calc(struct clk *clk) +{ + unsigned long rate; + + rate = sys_clk.rate; + rate /= 2; + clk->rate = rate; +} + static void half_clk_calc(struct clk *clk) { clk->rate = clk->parent->rate / 2; @@ -412,6 +421,14 @@ static struct clk diu_clk = { .calc = diu_clk_calc, }; +static struct clk viu_clk = { + .name = "viu_clk", + .flags = CLK_HAS_CTRL, + .reg = 1, + .bit = 18, + .calc = viu_clk_calc, +}; + static struct clk axe_clk = { .name = "axe_clk", .flags = CLK_HAS_CTRL, @@ -535,6 +552,7 @@ struct clk *rate_clks[] = { &ref_clk, &sys_clk, &diu_clk, + &viu_clk, &csb_clk, &e300_clk, &ips_clk, -- cgit v1.2.3-18-g5258 From 4b5006ec7bb73cd9d4c8a723d484b4c87fad4123 Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Fri, 23 Jul 2010 04:00:37 +0000 Subject: powerpc/5121: shared DIU framebuffer support MPC5121 DIU configuration/setup as initialized by the boot loader currently will get lost while booting Linux. As a result displaying the boot splash is not possible through the boot process. To prevent this we reserve configured DIU frame buffer address range while booting and preserve AOI descriptor and gamma table so that DIU continues displaying through the whole boot process. On first open from user space DIU frame buffer driver releases the reserved frame buffer area and continues to operate as usual. Signed-off-by: John Rigby Signed-off-by: Anatolij Gustschin Acked-by: Timur Tabi Signed-off-by: Grant Likely --- arch/powerpc/include/asm/mpc5121.h | 32 +++ arch/powerpc/platforms/512x/mpc5121_ads.c | 2 + arch/powerpc/platforms/512x/mpc5121_generic.c | 2 + arch/powerpc/platforms/512x/mpc512x.h | 2 + arch/powerpc/platforms/512x/mpc512x_shared.c | 284 ++++++++++++++++++++++++++ arch/powerpc/sysdev/fsl_soc.h | 1 + 6 files changed, 323 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/include/asm/mpc5121.h b/arch/powerpc/include/asm/mpc5121.h index e6a30bb1d16..8c0ab2ca689 100644 --- a/arch/powerpc/include/asm/mpc5121.h +++ b/arch/powerpc/include/asm/mpc5121.h @@ -21,4 +21,36 @@ struct mpc512x_reset_module { u32 rcer; /* Reset Control Enable Register */ }; +/* + * Clock Control Module + */ +struct mpc512x_ccm { + u32 spmr; /* System PLL Mode Register */ + u32 sccr1; /* System Clock Control Register 1 */ + u32 sccr2; /* System Clock Control Register 2 */ + u32 scfr1; /* System Clock Frequency Register 1 */ + u32 scfr2; /* System Clock Frequency Register 2 */ + u32 scfr2s; /* System Clock Frequency Shadow Register 2 */ + u32 bcr; /* Bread Crumb Register */ + u32 p0ccr; /* PSC0 Clock Control Register */ + u32 p1ccr; /* PSC1 CCR */ + u32 p2ccr; /* PSC2 CCR */ + u32 p3ccr; /* PSC3 CCR */ + u32 p4ccr; /* PSC4 CCR */ + u32 p5ccr; /* PSC5 CCR */ + u32 p6ccr; /* PSC6 CCR */ + u32 p7ccr; /* PSC7 CCR */ + u32 p8ccr; /* PSC8 CCR */ + u32 p9ccr; /* PSC9 CCR */ + u32 p10ccr; /* PSC10 CCR */ + u32 p11ccr; /* PSC11 CCR */ + u32 spccr; /* SPDIF Clock Control Register */ + u32 cccr; /* CFM Clock Control Register */ + u32 dccr; /* DIU Clock Control Register */ + u32 m1ccr; /* MSCAN1 CCR */ + u32 m2ccr; /* MSCAN2 CCR */ + u32 m3ccr; /* MSCAN3 CCR */ + u32 m4ccr; /* MSCAN4 CCR */ + u8 res[0x98]; /* Reserved */ +}; #endif /* __ASM_POWERPC_MPC5121_H__ */ diff --git a/arch/powerpc/platforms/512x/mpc5121_ads.c b/arch/powerpc/platforms/512x/mpc5121_ads.c index ee6ae129c25..dcef6ade48e 100644 --- a/arch/powerpc/platforms/512x/mpc5121_ads.c +++ b/arch/powerpc/platforms/512x/mpc5121_ads.c @@ -42,6 +42,7 @@ static void __init mpc5121_ads_setup_arch(void) for_each_compatible_node(np, "pci", "fsl,mpc5121-pci") mpc83xx_add_bridge(np); #endif + mpc512x_setup_diu(); } static void __init mpc5121_ads_init_IRQ(void) @@ -65,6 +66,7 @@ define_machine(mpc5121_ads) { .probe = mpc5121_ads_probe, .setup_arch = mpc5121_ads_setup_arch, .init = mpc512x_init, + .init_early = mpc512x_init_diu, .init_IRQ = mpc5121_ads_init_IRQ, .get_irq = ipic_get_irq, .calibrate_decr = generic_calibrate_decr, diff --git a/arch/powerpc/platforms/512x/mpc5121_generic.c b/arch/powerpc/platforms/512x/mpc5121_generic.c index a6c0e3a2615..e487eb06ec6 100644 --- a/arch/powerpc/platforms/512x/mpc5121_generic.c +++ b/arch/powerpc/platforms/512x/mpc5121_generic.c @@ -52,6 +52,8 @@ define_machine(mpc5121_generic) { .name = "MPC5121 generic", .probe = mpc5121_generic_probe, .init = mpc512x_init, + .init_early = mpc512x_init_diu, + .setup_arch = mpc512x_setup_diu, .init_IRQ = mpc512x_init_IRQ, .get_irq = ipic_get_irq, .calibrate_decr = generic_calibrate_decr, diff --git a/arch/powerpc/platforms/512x/mpc512x.h b/arch/powerpc/platforms/512x/mpc512x.h index b2daca0d148..1ab6d11d0b1 100644 --- a/arch/powerpc/platforms/512x/mpc512x.h +++ b/arch/powerpc/platforms/512x/mpc512x.h @@ -16,4 +16,6 @@ extern void __init mpc512x_init(void); extern int __init mpc5121_clk_init(void); void __init mpc512x_declare_of_platform_devices(void); extern void mpc512x_restart(char *cmd); +extern void mpc512x_init_diu(void); +extern void mpc512x_setup_diu(void); #endif /* __MPC512X_H__ */ diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c index 707e572b7c4..e41ebbdb3e1 100644 --- a/arch/powerpc/platforms/512x/mpc512x_shared.c +++ b/arch/powerpc/platforms/512x/mpc512x_shared.c @@ -16,7 +16,11 @@ #include #include #include +#include +#include +#include +#include #include #include #include @@ -54,6 +58,286 @@ void mpc512x_restart(char *cmd) ; } +struct fsl_diu_shared_fb { + u8 gamma[0x300]; /* 32-bit aligned! */ + struct diu_ad ad0; /* 32-bit aligned! */ + phys_addr_t fb_phys; + size_t fb_len; + bool in_use; +}; + +unsigned int mpc512x_get_pixel_format(unsigned int bits_per_pixel, + int monitor_port) +{ + switch (bits_per_pixel) { + case 32: + return 0x88883316; + case 24: + return 0x88082219; + case 16: + return 0x65053118; + } + return 0x00000400; +} + +void mpc512x_set_gamma_table(int monitor_port, char *gamma_table_base) +{ +} + +void mpc512x_set_monitor_port(int monitor_port) +{ +} + +#define DIU_DIV_MASK 0x000000ff +void mpc512x_set_pixel_clock(unsigned int pixclock) +{ + unsigned long bestval, bestfreq, speed, busfreq; + unsigned long minpixclock, maxpixclock, pixval; + struct mpc512x_ccm __iomem *ccm; + struct device_node *np; + u32 temp; + long err; + int i; + + np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-clock"); + if (!np) { + pr_err("Can't find clock control module.\n"); + return; + } + + ccm = of_iomap(np, 0); + of_node_put(np); + if (!ccm) { + pr_err("Can't map clock control module reg.\n"); + return; + } + + np = of_find_node_by_type(NULL, "cpu"); + if (np) { + const unsigned int *prop = + of_get_property(np, "bus-frequency", NULL); + + of_node_put(np); + if (prop) { + busfreq = *prop; + } else { + pr_err("Can't get bus-frequency property\n"); + return; + } + } else { + pr_err("Can't find 'cpu' node.\n"); + return; + } + + /* Pixel Clock configuration */ + pr_debug("DIU: Bus Frequency = %lu\n", busfreq); + speed = busfreq * 4; /* DIU_DIV ratio is 4 * CSB_CLK / DIU_CLK */ + + /* Calculate the pixel clock with the smallest error */ + /* calculate the following in steps to avoid overflow */ + pr_debug("DIU pixclock in ps - %d\n", pixclock); + temp = (1000000000 / pixclock) * 1000; + pixclock = temp; + pr_debug("DIU pixclock freq - %u\n", pixclock); + + temp = temp / 20; /* pixclock * 0.05 */ + pr_debug("deviation = %d\n", temp); + minpixclock = pixclock - temp; + maxpixclock = pixclock + temp; + pr_debug("DIU minpixclock - %lu\n", minpixclock); + pr_debug("DIU maxpixclock - %lu\n", maxpixclock); + pixval = speed/pixclock; + pr_debug("DIU pixval = %lu\n", pixval); + + err = LONG_MAX; + bestval = pixval; + pr_debug("DIU bestval = %lu\n", bestval); + + bestfreq = 0; + for (i = -1; i <= 1; i++) { + temp = speed / (pixval+i); + pr_debug("DIU test pixval i=%d, pixval=%lu, temp freq. = %u\n", + i, pixval, temp); + if ((temp < minpixclock) || (temp > maxpixclock)) + pr_debug("DIU exceeds monitor range (%lu to %lu)\n", + minpixclock, maxpixclock); + else if (abs(temp - pixclock) < err) { + pr_debug("Entered the else if block %d\n", i); + err = abs(temp - pixclock); + bestval = pixval + i; + bestfreq = temp; + } + } + + pr_debug("DIU chose = %lx\n", bestval); + pr_debug("DIU error = %ld\n NomPixClk ", err); + pr_debug("DIU: Best Freq = %lx\n", bestfreq); + /* Modify DIU_DIV in CCM SCFR1 */ + temp = in_be32(&ccm->scfr1); + pr_debug("DIU: Current value of SCFR1: 0x%08x\n", temp); + temp &= ~DIU_DIV_MASK; + temp |= (bestval & DIU_DIV_MASK); + out_be32(&ccm->scfr1, temp); + pr_debug("DIU: Modified value of SCFR1: 0x%08x\n", temp); + iounmap(ccm); +} + +ssize_t mpc512x_show_monitor_port(int monitor_port, char *buf) +{ + return sprintf(buf, "0 - 5121 LCD\n"); +} + +int mpc512x_set_sysfs_monitor_port(int val) +{ + return 0; +} + +static struct fsl_diu_shared_fb __attribute__ ((__aligned__(8))) diu_shared_fb; + +#if defined(CONFIG_FB_FSL_DIU) || \ + defined(CONFIG_FB_FSL_DIU_MODULE) +static inline void mpc512x_free_bootmem(struct page *page) +{ + __ClearPageReserved(page); + BUG_ON(PageTail(page)); + BUG_ON(atomic_read(&page->_count) > 1); + atomic_set(&page->_count, 1); + __free_page(page); + totalram_pages++; +} + +void mpc512x_release_bootmem(void) +{ + unsigned long addr = diu_shared_fb.fb_phys & PAGE_MASK; + unsigned long size = diu_shared_fb.fb_len; + unsigned long start, end; + + if (diu_shared_fb.in_use) { + start = PFN_UP(addr); + end = PFN_DOWN(addr + size); + + for (; start < end; start++) + mpc512x_free_bootmem(pfn_to_page(start)); + + diu_shared_fb.in_use = false; + } + diu_ops.release_bootmem = NULL; +} +#endif + +/* + * Check if DIU was pre-initialized. If so, perform steps + * needed to continue displaying through the whole boot process. + * Move area descriptor and gamma table elsewhere, they are + * destroyed by bootmem allocator otherwise. The frame buffer + * address range will be reserved in setup_arch() after bootmem + * allocator is up. + */ +void __init mpc512x_init_diu(void) +{ + struct device_node *np; + struct diu __iomem *diu_reg; + phys_addr_t desc; + void __iomem *vaddr; + unsigned long mode, pix_fmt, res, bpp; + unsigned long dst; + + np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-diu"); + if (!np) { + pr_err("No DIU node\n"); + return; + } + + diu_reg = of_iomap(np, 0); + of_node_put(np); + if (!diu_reg) { + pr_err("Can't map DIU\n"); + return; + } + + mode = in_be32(&diu_reg->diu_mode); + if (mode != MFB_MODE1) { + pr_info("%s: DIU OFF\n", __func__); + goto out; + } + + desc = in_be32(&diu_reg->desc[0]); + vaddr = ioremap(desc, sizeof(struct diu_ad)); + if (!vaddr) { + pr_err("Can't map DIU area desc.\n"); + goto out; + } + memcpy(&diu_shared_fb.ad0, vaddr, sizeof(struct diu_ad)); + /* flush fb area descriptor */ + dst = (unsigned long)&diu_shared_fb.ad0; + flush_dcache_range(dst, dst + sizeof(struct diu_ad) - 1); + + res = in_be32(&diu_reg->disp_size); + pix_fmt = in_le32(vaddr); + bpp = ((pix_fmt >> 16) & 0x3) + 1; + diu_shared_fb.fb_phys = in_le32(vaddr + 4); + diu_shared_fb.fb_len = ((res & 0xfff0000) >> 16) * (res & 0xfff) * bpp; + diu_shared_fb.in_use = true; + iounmap(vaddr); + + desc = in_be32(&diu_reg->gamma); + vaddr = ioremap(desc, sizeof(diu_shared_fb.gamma)); + if (!vaddr) { + pr_err("Can't map DIU area desc.\n"); + diu_shared_fb.in_use = false; + goto out; + } + memcpy(&diu_shared_fb.gamma, vaddr, sizeof(diu_shared_fb.gamma)); + /* flush gamma table */ + dst = (unsigned long)&diu_shared_fb.gamma; + flush_dcache_range(dst, dst + sizeof(diu_shared_fb.gamma) - 1); + + iounmap(vaddr); + out_be32(&diu_reg->gamma, virt_to_phys(&diu_shared_fb.gamma)); + out_be32(&diu_reg->desc[1], 0); + out_be32(&diu_reg->desc[2], 0); + out_be32(&diu_reg->desc[0], virt_to_phys(&diu_shared_fb.ad0)); + +out: + iounmap(diu_reg); +} + +void __init mpc512x_setup_diu(void) +{ + int ret; + + /* + * We do not allocate and configure new area for bitmap buffer + * because it would requere copying bitmap data (splash image) + * and so negatively affect boot time. Instead we reserve the + * already configured frame buffer area so that it won't be + * destroyed. The starting address of the area to reserve and + * also it's length is passed to reserve_bootmem(). It will be + * freed later on first open of fbdev, when splash image is not + * needed any more. + */ + if (diu_shared_fb.in_use) { + ret = reserve_bootmem(diu_shared_fb.fb_phys, + diu_shared_fb.fb_len, + BOOTMEM_EXCLUSIVE); + if (ret) { + pr_err("%s: reserve bootmem failed\n", __func__); + diu_shared_fb.in_use = false; + } + } + +#if defined(CONFIG_FB_FSL_DIU) || \ + defined(CONFIG_FB_FSL_DIU_MODULE) + diu_ops.get_pixel_format = mpc512x_get_pixel_format; + diu_ops.set_gamma_table = mpc512x_set_gamma_table; + diu_ops.set_monitor_port = mpc512x_set_monitor_port; + diu_ops.set_pixel_clock = mpc512x_set_pixel_clock; + diu_ops.show_monitor_port = mpc512x_show_monitor_port; + diu_ops.set_sysfs_monitor_port = mpc512x_set_sysfs_monitor_port; + diu_ops.release_bootmem = mpc512x_release_bootmem; +#endif +} + void __init mpc512x_init_IRQ(void) { struct device_node *np; diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h index 42381bb6cd5..53609489a62 100644 --- a/arch/powerpc/sysdev/fsl_soc.h +++ b/arch/powerpc/sysdev/fsl_soc.h @@ -30,6 +30,7 @@ struct platform_diu_data_ops { void (*set_pixel_clock) (unsigned int pixclock); ssize_t (*show_monitor_port) (int monitor_port, char *buf); int (*set_sysfs_monitor_port) (int val); + void (*release_bootmem) (void); }; extern struct platform_diu_data_ops diu_ops; -- cgit v1.2.3-18-g5258