From e3fec2f74f7f90d2149a24243a4d040caabe6f30 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 17 Dec 2013 21:26:19 -0500 Subject: lib: Add missing arch generic-y entries for asm-generic/hash.h Reported-by: Stephen Rothwell Signed-off-by: David S. Miller --- arch/cris/include/asm/Kbuild | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/cris') diff --git a/arch/cris/include/asm/Kbuild b/arch/cris/include/asm/Kbuild index b06caf649a9..c5963b3e462 100644 --- a/arch/cris/include/asm/Kbuild +++ b/arch/cris/include/asm/Kbuild @@ -12,3 +12,4 @@ generic-y += trace_clock.h generic-y += vga.h generic-y += xor.h generic-y += preempt.h +generic-y += hash.h -- cgit v1.2.3-18-g5258 From 64d8ad933d06f3d5070db8eb855cdfc0a80b595d Mon Sep 17 00:00:00 2001 From: Michael Opdenacker Date: Wed, 4 Sep 2013 07:17:40 +0200 Subject: cris: remove deprecated IRQF_DISABLED This patch proposes to remove the IRQF_DISABLED flag from CRIS architecture code. It's a NOOP since 2.6.35 and it will be removed one day. Comments mentioning IRQF_DISABLED are also updated, knowing that all interrupts are now "fast interrupts", their handlers running with interrupts disabled. Don't hesitate to let me know if you have other ways of rephrasing the comments! This is an update for 3.11 of a patch already sent for 3.10 Signed-off-by: Michael Opdenacker Signed-off-by: Jesper Nilsson --- arch/cris/arch-v10/drivers/gpio.c | 4 ++-- arch/cris/arch-v10/drivers/sync_serial.c | 4 ++-- arch/cris/arch-v10/kernel/time.c | 6 ++---- arch/cris/arch-v32/drivers/mach-a3/gpio.c | 2 +- arch/cris/arch-v32/drivers/mach-fs/gpio.c | 4 ++-- arch/cris/arch-v32/kernel/fasttimer.c | 2 +- arch/cris/arch-v32/kernel/irq.c | 10 +++++----- arch/cris/arch-v32/kernel/smp.c | 2 +- arch/cris/arch-v32/kernel/time.c | 6 ++---- arch/cris/arch-v32/mach-a3/arbiter.c | 4 ++-- arch/cris/arch-v32/mach-fs/arbiter.c | 2 +- arch/cris/include/arch-v10/arch/irq.h | 6 +++--- arch/cris/include/arch-v32/arch/irq.h | 6 +++--- arch/cris/kernel/irq.c | 3 --- 14 files changed, 27 insertions(+), 34 deletions(-) (limited to 'arch/cris') diff --git a/arch/cris/arch-v10/drivers/gpio.c b/arch/cris/arch-v10/drivers/gpio.c index 609d5510410..f4374bae4fb 100644 --- a/arch/cris/arch-v10/drivers/gpio.c +++ b/arch/cris/arch-v10/drivers/gpio.c @@ -838,13 +838,13 @@ static int __init gpio_init(void) * in some tests. */ res = request_irq(TIMER0_IRQ_NBR, gpio_poll_timer_interrupt, - IRQF_SHARED | IRQF_DISABLED, "gpio poll", gpio_name); + IRQF_SHARED, "gpio poll", gpio_name); if (res) { printk(KERN_CRIT "err: timer0 irq for gpio\n"); return res; } res = request_irq(PA_IRQ_NBR, gpio_interrupt, - IRQF_SHARED | IRQF_DISABLED, "gpio PA", gpio_name); + IRQF_SHARED, "gpio PA", gpio_name); if (res) printk(KERN_CRIT "err: PA irq for gpio\n"); diff --git a/arch/cris/arch-v10/drivers/sync_serial.c b/arch/cris/arch-v10/drivers/sync_serial.c index a1c498d18d3..04d39e0ca55 100644 --- a/arch/cris/arch-v10/drivers/sync_serial.c +++ b/arch/cris/arch-v10/drivers/sync_serial.c @@ -580,7 +580,7 @@ static int sync_serial_open(struct inode *inode, struct file *file) if (port == &ports[0]) { if (request_irq(8, manual_interrupt, - IRQF_SHARED | IRQF_DISABLED, + IRQF_SHARED, "synchronous serial manual irq", &ports[0])) { printk(KERN_CRIT "Can't alloc " @@ -590,7 +590,7 @@ static int sync_serial_open(struct inode *inode, struct file *file) } else if (port == &ports[1]) { if (request_irq(8, manual_interrupt, - IRQF_SHARED | IRQF_DISABLED, + IRQF_SHARED, "synchronous serial manual irq", &ports[1])) { printk(KERN_CRIT "Can't alloc " diff --git a/arch/cris/arch-v10/kernel/time.c b/arch/cris/arch-v10/kernel/time.c index fce7c541d70..e6a722715a8 100644 --- a/arch/cris/arch-v10/kernel/time.c +++ b/arch/cris/arch-v10/kernel/time.c @@ -178,13 +178,11 @@ timer_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -/* timer is IRQF_SHARED so drivers can add stuff to the timer irq chain - * it needs to be IRQF_DISABLED to make the jiffies update work properly - */ +/* timer is IRQF_SHARED so drivers can add stuff to the timer irq chain */ static struct irqaction irq2 = { .handler = timer_interrupt, - .flags = IRQF_SHARED | IRQF_DISABLED, + .flags = IRQF_SHARED, .name = "timer", }; diff --git a/arch/cris/arch-v32/drivers/mach-a3/gpio.c b/arch/cris/arch-v32/drivers/mach-a3/gpio.c index 0b86deedacb..74f9fe80940 100644 --- a/arch/cris/arch-v32/drivers/mach-a3/gpio.c +++ b/arch/cris/arch-v32/drivers/mach-a3/gpio.c @@ -978,7 +978,7 @@ static int __init gpio_init(void) CRIS_LED_DISK_WRITE(0); int res2 = request_irq(GIO_INTR_VECT, gpio_interrupt, - IRQF_SHARED | IRQF_DISABLED, "gpio", &alarmlist); + IRQF_SHARED, "gpio", &alarmlist); if (res2) { printk(KERN_ERR "err: irq for gpio\n"); return res2; diff --git a/arch/cris/arch-v32/drivers/mach-fs/gpio.c b/arch/cris/arch-v32/drivers/mach-fs/gpio.c index a2ac0917f1a..9e54273af0c 100644 --- a/arch/cris/arch-v32/drivers/mach-fs/gpio.c +++ b/arch/cris/arch-v32/drivers/mach-fs/gpio.c @@ -964,11 +964,11 @@ gpio_init(void) * in some tests. */ if (request_irq(TIMER0_INTR_VECT, gpio_poll_timer_interrupt, - IRQF_SHARED | IRQF_DISABLED, "gpio poll", &alarmlist)) + IRQF_SHARED, "gpio poll", &alarmlist)) printk(KERN_ERR "timer0 irq for gpio\n"); if (request_irq(GIO_INTR_VECT, gpio_pa_interrupt, - IRQF_SHARED | IRQF_DISABLED, "gpio PA", &alarmlist)) + IRQF_SHARED, "gpio PA", &alarmlist)) printk(KERN_ERR "PA irq for gpio\n"); #ifdef CONFIG_ETRAX_VIRTUAL_GPIO diff --git a/arch/cris/arch-v32/kernel/fasttimer.c b/arch/cris/arch-v32/kernel/fasttimer.c index f6644535b17..b130c2c5fdd 100644 --- a/arch/cris/arch-v32/kernel/fasttimer.c +++ b/arch/cris/arch-v32/kernel/fasttimer.c @@ -786,7 +786,7 @@ int fast_timer_init(void) proc_create("fasttimer", 0, NULL, &proc_fasttimer_fops); #endif /* PROC_FS */ if (request_irq(TIMER0_INTR_VECT, timer_trig_interrupt, - IRQF_SHARED | IRQF_DISABLED, + IRQF_SHARED, "fast timer int", &fast_timer_list)) printk(KERN_ERR "err: fasttimer irq\n"); fast_timer_is_init = 1; diff --git a/arch/cris/arch-v32/kernel/irq.c b/arch/cris/arch-v32/kernel/irq.c index 5ebe6e84182..25437ae2812 100644 --- a/arch/cris/arch-v32/kernel/irq.c +++ b/arch/cris/arch-v32/kernel/irq.c @@ -331,11 +331,11 @@ extern void do_IRQ(int irq, struct pt_regs * regs); void crisv32_do_IRQ(int irq, int block, struct pt_regs* regs) { - /* Interrupts that may not be moved to another CPU and - * are IRQF_DISABLED may skip blocking. This is currently - * only valid for the timer IRQ and the IPI and is used - * for the timer interrupt to avoid watchdog starvation. - */ + /* Interrupts that may not be moved to another CPU may + * skip blocking. This is currently only valid for the + * timer IRQ and the IPI and is used for the timer + * interrupt to avoid watchdog starvation. + */ if (!block) { do_IRQ(irq, regs); return; diff --git a/arch/cris/arch-v32/kernel/smp.c b/arch/cris/arch-v32/kernel/smp.c index fe8e6039db2..0698582467c 100644 --- a/arch/cris/arch-v32/kernel/smp.c +++ b/arch/cris/arch-v32/kernel/smp.c @@ -64,7 +64,7 @@ static irqreturn_t crisv32_ipi_interrupt(int irq, void *dev_id); static int send_ipi(int vector, int wait, cpumask_t cpu_mask); static struct irqaction irq_ipi = { .handler = crisv32_ipi_interrupt, - .flags = IRQF_DISABLED, + .flags = 0, .name = "ipi", }; diff --git a/arch/cris/arch-v32/kernel/time.c b/arch/cris/arch-v32/kernel/time.c index 8c4b45efd7b..ee66866538f 100644 --- a/arch/cris/arch-v32/kernel/time.c +++ b/arch/cris/arch-v32/kernel/time.c @@ -216,12 +216,10 @@ static inline irqreturn_t timer_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -/* Timer is IRQF_SHARED so drivers can add stuff to the timer irq chain. - * It needs to be IRQF_DISABLED to make the jiffies update work properly. - */ +/* Timer is IRQF_SHARED so drivers can add stuff to the timer irq chain. */ static struct irqaction irq_timer = { .handler = timer_interrupt, - .flags = IRQF_SHARED | IRQF_DISABLED, + .flags = IRQF_SHARED, .name = "timer" }; diff --git a/arch/cris/arch-v32/mach-a3/arbiter.c b/arch/cris/arch-v32/mach-a3/arbiter.c index 15f5c9de263..ab5c421a4de 100644 --- a/arch/cris/arch-v32/mach-a3/arbiter.c +++ b/arch/cris/arch-v32/mach-a3/arbiter.c @@ -256,11 +256,11 @@ static void crisv32_arbiter_init(void) crisv32_arbiter_config(1, EXT_REGION, 0); if (request_irq(MEMARB_FOO_INTR_VECT, crisv32_foo_arbiter_irq, - IRQF_DISABLED, "arbiter", NULL)) + 0, "arbiter", NULL)) printk(KERN_ERR "Couldn't allocate arbiter IRQ\n"); if (request_irq(MEMARB_BAR_INTR_VECT, crisv32_bar_arbiter_irq, - IRQF_DISABLED, "arbiter", NULL)) + 0, "arbiter", NULL)) printk(KERN_ERR "Couldn't allocate arbiter IRQ\n"); #ifndef CONFIG_ETRAX_KGDB diff --git a/arch/cris/arch-v32/mach-fs/arbiter.c b/arch/cris/arch-v32/mach-fs/arbiter.c index 3f8ebb5c147..c97f4d8120f 100644 --- a/arch/cris/arch-v32/mach-fs/arbiter.c +++ b/arch/cris/arch-v32/mach-fs/arbiter.c @@ -184,7 +184,7 @@ static void crisv32_arbiter_init(void) crisv32_arbiter_config(EXT_REGION, 0); crisv32_arbiter_config(INT_REGION, 0); - if (request_irq(MEMARB_INTR_VECT, crisv32_arbiter_irq, IRQF_DISABLED, + if (request_irq(MEMARB_INTR_VECT, crisv32_arbiter_irq, 0, "arbiter", NULL)) printk(KERN_ERR "Couldn't allocate arbiter IRQ\n"); diff --git a/arch/cris/include/arch-v10/arch/irq.h b/arch/cris/include/arch-v10/arch/irq.h index ca2675ae08e..6aecb835037 100644 --- a/arch/cris/include/arch-v10/arch/irq.h +++ b/arch/cris/include/arch-v10/arch/irq.h @@ -141,9 +141,9 @@ __asm__ ( \ * handler is run and it prioritizes the timer interrupt. However if we had BLOCK'ed * it here, we would not get the multiple_irq at all. * - * The non-blocking here is based on the knowledge that the timer interrupt is - * registered as a fast interrupt (IRQF_DISABLED) so that we _know_ there will not - * be an sti() before the timer irq handler is run to acknowledge the interrupt. + * The non-blocking here is based on the knowledge that the timer interrupt runs + * with interrupts disabled, and therefore there will not be an sti() before the + * timer irq handler is run to acknowledge the interrupt. */ #define BUILD_TIMER_IRQ(nr,mask) \ diff --git a/arch/cris/include/arch-v32/arch/irq.h b/arch/cris/include/arch-v32/arch/irq.h index fe3cdd22bed..0c1b4d3a34e 100644 --- a/arch/cris/include/arch-v32/arch/irq.h +++ b/arch/cris/include/arch-v32/arch/irq.h @@ -102,9 +102,9 @@ __asm__ ( \ * multiple_irq handler is run and it prioritizes the timer interrupt. However * if we had BLOCK'edit here, we would not get the multiple_irq at all. * - * The non-blocking here is based on the knowledge that the timer interrupt is - * registered as a fast interrupt (IRQF_DISABLED) so that we _know_ there will not - * be an sti() before the timer irq handler is run to acknowledge the interrupt. + * The non-blocking here is based on the knowledge that the timer interrupt runs + * with interrupts disabled, and therefore there will not be an sti() before the + * timer irq handler is run to acknowledge the interrupt. */ #define BUILD_TIMER_IRQ(nr, mask) \ void IRQ_NAME(nr); \ diff --git a/arch/cris/kernel/irq.c b/arch/cris/kernel/irq.c index d36836dbbc0..dd0be5de55d 100644 --- a/arch/cris/kernel/irq.c +++ b/arch/cris/kernel/irq.c @@ -40,9 +40,6 @@ /* called by the assembler IRQ entry functions defined in irq.h * to dispatch the interrupts to registered handlers - * interrupts are disabled upon entry - depending on if the - * interrupt was registered with IRQF_DISABLED or not, interrupts - * are re-enabled or not. */ asmlinkage void do_IRQ(int irq, struct pt_regs * regs) -- cgit v1.2.3-18-g5258 From 329fddd7b60cf6aed53cdb6fdc8e64117b8e8bc6 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 2 Jan 2014 13:07:37 +0100 Subject: cris: sync_serial: remove interruptible_sleep_on sleep_on and its variants are racy and going away. This replaces the two uses in the cris sync_serial drivers with the equivalent but race-free wait_event_interruptible. Signed-off-by: Arnd Bergmann Cc: Mikael Starvik Cc: linux-cris-kernel@axis.com Signed-off-by: Jesper Nilsson --- arch/cris/arch-v10/drivers/sync_serial.c | 4 +++- arch/cris/arch-v32/drivers/sync_serial.c | 4 +++- 2 files changed, 6 insertions(+), 2 deletions(-) (limited to 'arch/cris') diff --git a/arch/cris/arch-v10/drivers/sync_serial.c b/arch/cris/arch-v10/drivers/sync_serial.c index 04d39e0ca55..29eb02ab3f2 100644 --- a/arch/cris/arch-v10/drivers/sync_serial.c +++ b/arch/cris/arch-v10/drivers/sync_serial.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -1136,7 +1137,8 @@ static ssize_t sync_serial_read(struct file *file, char *buf, if (file->f_flags & O_NONBLOCK) return -EAGAIN; - interruptible_sleep_on(&port->in_wait_q); + wait_event_interruptible(port->in_wait_q, + !(start == end && !port->full)); if (signal_pending(current)) return -EINTR; diff --git a/arch/cris/arch-v32/drivers/sync_serial.c b/arch/cris/arch-v32/drivers/sync_serial.c index 219f704e322..bbb806b6883 100644 --- a/arch/cris/arch-v32/drivers/sync_serial.c +++ b/arch/cris/arch-v32/drivers/sync_serial.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -1144,7 +1145,8 @@ static ssize_t sync_serial_read(struct file * file, char * buf, if (file->f_flags & O_NONBLOCK) return -EAGAIN; - interruptible_sleep_on(&port->in_wait_q); + wait_event_interruptible(port->in_wait_q, + !(start == end && !port->full)); if (signal_pending(current)) return -EINTR; -- cgit v1.2.3-18-g5258 From bb1d2a945344e2a5100f5c7f8bb6e3e4ae03a2ab Mon Sep 17 00:00:00 2001 From: Jesper Nilsson Date: Thu, 9 Jan 2014 11:16:37 +0100 Subject: CRIS: Add missing syscalls Complete list of syscalls for CRISv10 and CRISv32. Clean up some whitespace at the same time. Signed-off-by: Jesper Nilsson --- arch/cris/arch-v10/kernel/entry.S | 180 ++++++++++++++++++++---------------- arch/cris/arch-v32/kernel/entry.S | 34 +++++-- arch/cris/include/asm/unistd.h | 2 +- arch/cris/include/uapi/asm/unistd.h | 16 ++++ 4 files changed, 140 insertions(+), 92 deletions(-) (limited to 'arch/cris') diff --git a/arch/cris/arch-v10/kernel/entry.S b/arch/cris/arch-v10/kernel/entry.S index 897bba67bf7..def0a530e9d 100644 --- a/arch/cris/arch-v10/kernel/entry.S +++ b/arch/cris/arch-v10/kernel/entry.S @@ -13,8 +13,8 @@ * after a timer-interrupt and after each system call. * * Stack layout in 'ret_from_system_call': - * ptrace needs to have all regs on the stack. - * if the order here is changed, it needs to be + * ptrace needs to have all regs on the stack. + * if the order here is changed, it needs to be * updated in fork.c:copy_process, signal.c:do_signal, * ptrace.c and ptrace.h * @@ -31,7 +31,7 @@ #include ;; functions exported from this file - + .globl system_call .globl ret_from_intr .globl ret_from_fork @@ -46,10 +46,10 @@ .globl do_sigtrap .globl gdb_handle_breakpoint .globl sys_call_table - + ;; below are various parts of system_call which are not in the fast-path - -#ifdef CONFIG_PREEMPT + +#ifdef CONFIG_PREEMPT ; Check if preemptive kernel scheduling should be done _resume_kernel: di @@ -74,7 +74,7 @@ _need_resched: nop #else #define _resume_kernel _Rexit -#endif +#endif ; Called at exit from fork. schedule_tail must be called to drop ; spinlock if CONFIG_PREEMPT @@ -91,16 +91,16 @@ ret_from_kernel_thread: ba ret_from_sys_call ret_from_intr: - ;; check for resched if preemptive kernel or if we're going back to user-mode + ;; check for resched if preemptive kernel or if we're going back to user-mode ;; this test matches the user_regs(regs) macro ;; we cannot simply test $dccr, because that does not necessarily ;; reflect what mode we'll return into. - + move.d [$sp + PT_dccr], $r0; regs->dccr btstq 8, $r0 ; U-flag bpl _resume_kernel - ; Note that di below is in delay slot - + ; Note that di below is in delay slot + _resume_userspace: di ; so need_resched and sigpending don't change @@ -113,7 +113,7 @@ _resume_userspace: nop ba _Rexit nop - + ;; The system_call is called by a BREAK instruction, which works like ;; an interrupt call but it stores the return PC in BRP instead of IRP. ;; Since we dont really want to have two epilogues (one for system calls @@ -123,7 +123,7 @@ _resume_userspace: ;; ;; Since we can't have system calls inside interrupts, it should not matter ;; that we don't stack IRP. - ;; + ;; ;; In r9 we have the wanted syscall number. Arguments come in r10,r11,r12,r13,mof,srp ;; ;; This function looks on the _surface_ like spaghetti programming, but it's @@ -140,7 +140,7 @@ system_call: movem $r13, [$sp] ; push r0-r13 push $r10 ; push orig_r10 clear.d [$sp=$sp-4] ; frametype == 0, normal stackframe - + movs.w -ENOSYS, $r0 move.d $r0, [$sp+PT_r10] ; put the default return value in r10 in the frame @@ -148,17 +148,17 @@ system_call: movs.w -8192, $r0 ; THREAD_SIZE == 8192 and.d $sp, $r0 - + move.d [$r0+TI_flags], $r0 btstq TIF_SYSCALL_TRACE, $r0 bmi _syscall_trace_entry - nop + nop -_syscall_traced: +_syscall_traced: ;; check for sanity in the requested syscall number - - cmpu.w NR_syscalls, $r9 + + cmpu.w NR_syscalls, $r9 bcc ret_from_sys_call lslq 2, $r9 ; multiply by 4, in the delay slot @@ -166,28 +166,28 @@ _syscall_traced: ;; of the register structure itself. some syscalls need this. push $sp - + ;; the parameter carrying registers r10, r11, r12 and 13 are intact. - ;; the fifth and sixth parameters (if any) was in mof and srp + ;; the fifth and sixth parameters (if any) was in mof and srp ;; respectively, and we need to put them on the stack. push $srp push $mof - + jsr [$r9+sys_call_table] ; actually do the system call addq 3*4, $sp ; pop the mof, srp and regs parameters move.d $r10, [$sp+PT_r10] ; save the return value moveq 1, $r9 ; "parameter" to ret_from_sys_call to show it was a sys call - + ;; fall through into ret_from_sys_call to return - + ret_from_sys_call: ;; r9 is a parameter - if >=1 we came from a syscall, if 0, from an irq - + ;; get the current task-struct pointer (see top for defs) - movs.w -8192, $r0 ; THREAD_SIZE == 8192 + movs.w -8192, $r0 ; THREAD_SIZE == 8192 and.d $sp, $r0 di ; make sure need_resched and sigpending don't change @@ -202,7 +202,7 @@ _Rexit: bne _RBFexit ; was not CRIS_FRAME_NORMAL, handle otherwise addq 4, $sp ; skip orig_r10, in delayslot movem [$sp+], $r13 ; registers r0-r13 - pop $mof ; multiply overflow register + pop $mof ; multiply overflow register pop $dccr ; condition codes pop $srp ; subroutine return pointer ;; now we have a 4-word SBFS frame which we do not want to restore @@ -216,14 +216,14 @@ _Rexit: _RBFexit: movem [$sp+], $r13 ; registers r0-r13, in delay slot - pop $mof ; multiply overflow register + pop $mof ; multiply overflow register pop $dccr ; condition codes pop $srp ; subroutine return pointer rbf [$sp+] ; return by popping the CPU status ;; We get here after doing a syscall if extra work might need to be done ;; perform syscall exit tracing if needed - + _syscall_exit_work: ;; $r0 contains current at this point and irq's are disabled @@ -231,22 +231,22 @@ _syscall_exit_work: btstq TIF_SYSCALL_TRACE, $r1 bpl _work_pending nop - + ei move.d $r9, $r1 ; preserve r9 jsr do_syscall_trace move.d $r1, $r9 - + ba _resume_userspace nop - + _work_pending: move.d [$r0+TI_flags], $r1 btstq TIF_NEED_RESCHED, $r1 bpl _work_notifysig ; was neither trace nor sched, must be signal/notify nop - + _work_resched: move.d $r9, $r1 ; preserve r9 jsr schedule @@ -268,17 +268,17 @@ _work_notifysig: move.d $sp, $r11 ; the regs param move.d $r1, $r12 ; the thread_info_flags parameter jsr do_notify_resume - + ba _Rexit nop ;; We get here as a sidetrack when we've entered a syscall with the ;; trace-bit set. We need to call do_syscall_trace and then continue ;; with the call. - + _syscall_trace_entry: ;; PT_r10 in the frame contains -ENOSYS as required, at this point - + jsr do_syscall_trace ;; now re-enter the syscall code to do the syscall itself @@ -292,10 +292,10 @@ _syscall_trace_entry: move.d [$sp+PT_r13], $r13 move [$sp+PT_mof], $mof move [$sp+PT_srp], $srp - + ba _syscall_traced nop - + ;; resume performs the actual task-switching, by switching stack pointers ;; input arguments: r10 = prev, r11 = next, r12 = thread offset in task struct ;; returns old current in r10 @@ -303,29 +303,29 @@ _syscall_trace_entry: ;; TODO: see the i386 version. The switch_to which calls resume in our version ;; could really be an inline asm of this. -resume: - push $srp ; we keep the old/new PC on the stack +resume: + push $srp ; we keep the old/new PC on the stack add.d $r12, $r10 ; r10 = current tasks tss move $dccr, [$r10+THREAD_dccr]; save irq enable state di move $usp, [$r10+ THREAD_usp] ; save user-mode stackpointer - + ;; See copy_thread for the reason why register R9 is saved. subq 10*4, $sp movem $r9, [$sp] ; save non-scratch registers and R9. - + move.d $sp, [$r10+THREAD_ksp] ; save the kernel stack pointer for the old task move.d $sp, $r10 ; return last running task in r10 and.d -8192, $r10 ; get thread_info from stackpointer - move.d [$r10+TI_task], $r10 ; get task + move.d [$r10+TI_task], $r10 ; get task add.d $r12, $r11 ; find the new tasks tss move.d [$r11+THREAD_ksp], $sp ; switch into the new stackframe by restoring kernel sp movem [$sp+], $r9 ; restore non-scratch registers and R9. move [$r11+THREAD_usp], $usp ; restore user-mode stackpointer - + move [$r11+THREAD_dccr], $dccr ; restore irq enable status jump [$sp+] ; restore PC @@ -401,7 +401,7 @@ mmu_bus_fault: push $r10 ; frametype == 1, BUSFAULT frame type move.d $sp, $r10 ; pt_regs argument to handle_mmu_bus_fault - + jsr handle_mmu_bus_fault ; in arch/cris/arch-v10/mm/fault.c ;; now we need to return through the normal path, we cannot just @@ -410,10 +410,10 @@ mmu_bus_fault: ;; whatever. moveq 0, $r9 ; busfault is equivalent to an irq - + ba ret_from_intr nop - + ;; special handlers for breakpoint and NMI hwbreakpoint: push $dccr @@ -429,7 +429,7 @@ hwbreakpoint: pop $dccr retb nop - + IRQ1_interrupt: ;; this prologue MUST match the one in irq.h and the struct in ptregs.h!!! move $brp,[$sp=$sp-16]; instruction pointer and room for a fake SBFS frame @@ -500,7 +500,7 @@ Watchdog_bite: move.d $r10, [$r11] #endif - + ;; Note that we don't do "setf m" here (or after two necessary NOPs), ;; since *not* doing that saves us from re-entrancy checks. We don't want ;; to get here again due to possible subsequent NMIs; we want the watchdog @@ -525,14 +525,14 @@ _watchdogmsg: #endif /* CONFIG_ETRAX_WATCHDOG and not CONFIG_SVINTO_SIM */ -spurious_interrupt: +spurious_interrupt: di jump hard_reset_now ;; this handles the case when multiple interrupts arrive at the same time ;; we jump to the first set interrupt bit in a priority fashion ;; the hardware will call the unserved interrupts after the handler finishes - + multiple_interrupt: ;; this prologue MUST match the one in irq.h and the struct in ptregs.h!!! move $irp,[$sp=$sp-16]; instruction pointer and room for a fake SBFS frame @@ -551,7 +551,7 @@ multiple_interrupt: jump ret_from_intr do_sigtrap: - ;; + ;; ;; SIGTRAP the process that executed the break instruction. ;; Make a frame that Rexit in entry.S expects. ;; @@ -568,30 +568,30 @@ do_sigtrap: movs.w -8192,$r9 ; THREAD_SIZE == 8192 and.d $sp, $r9 move.d [$r9+TI_task], $r10 - move.d [$r10+TASK_pid], $r10 ; current->pid as arg1. + move.d [$r10+TASK_pid], $r10 ; current->pid as arg1. moveq 5, $r11 ; SIGTRAP as arg2. - jsr sys_kill + jsr sys_kill jump ret_from_intr ; Use the return routine for interrupts. -gdb_handle_breakpoint: +gdb_handle_breakpoint: push $dccr push $r0 #ifdef CONFIG_ETRAX_KGDB - move $dccr, $r0 ; U-flag not affected by previous insns. + move $dccr, $r0 ; U-flag not affected by previous insns. btstq 8, $r0 ; Test the U-flag. - bmi _ugdb_handle_breakpoint ; Go to user mode debugging. - nop ; Empty delay slot (cannot pop r0 here). + bmi _ugdb_handle_breakpoint ; Go to user mode debugging. + nop ; Empty delay slot (cannot pop r0 here). pop $r0 ; Restore r0. - ba kgdb_handle_breakpoint ; Go to kernel debugging. + ba kgdb_handle_breakpoint ; Go to kernel debugging. pop $dccr ; Restore dccr in delay slot. #endif - -_ugdb_handle_breakpoint: + +_ugdb_handle_breakpoint: move $brp, $r0 ; Use r0 temporarily for calculation. subq 2, $r0 ; Set to address of previous instruction. move $r0, $brp - pop $r0 ; Restore r0. - ba do_sigtrap ; SIGTRAP the offending process. + pop $r0 ; Restore r0. + ba do_sigtrap ; SIGTRAP the offending process. pop $dccr ; Restore dccr in delay slot. .data @@ -602,7 +602,7 @@ hw_bp_trig_ptr: .dword hw_bp_trigs .section .rodata,"a" -sys_call_table: +sys_call_table: .long sys_restart_syscall /* 0 - old "setup()" system call, used for restarting */ .long sys_exit .long sys_fork @@ -713,7 +713,7 @@ sys_call_table: .long sys_newlstat .long sys_newfstat .long sys_ni_syscall /* old sys_uname holder */ - .long sys_ni_syscall /* sys_iopl in i386 */ + .long sys_ni_syscall /* 110 */ /* sys_iopl in i386 */ .long sys_vhangup .long sys_ni_syscall /* old "idle" system call */ .long sys_ni_syscall /* vm86old in i386 */ @@ -730,7 +730,7 @@ sys_call_table: .long sys_adjtimex .long sys_mprotect /* 125 */ .long sys_sigprocmask - .long sys_ni_syscall /* old "create_module" */ + .long sys_ni_syscall /* old "create_module" */ .long sys_init_module .long sys_delete_module .long sys_ni_syscall /* 130: old "get_kernel_syms" */ @@ -795,7 +795,7 @@ sys_call_table: .long sys_ni_syscall /* streams2 */ .long sys_vfork /* 190 */ .long sys_getrlimit - .long sys_mmap2 + .long sys_mmap2 /* mmap_pgoff */ .long sys_truncate64 .long sys_ftruncate64 .long sys_stat64 /* 195 */ @@ -861,21 +861,21 @@ sys_call_table: .long sys_epoll_ctl /* 255 */ .long sys_epoll_wait .long sys_remap_file_pages - .long sys_set_tid_address - .long sys_timer_create - .long sys_timer_settime /* 260 */ - .long sys_timer_gettime - .long sys_timer_getoverrun - .long sys_timer_delete - .long sys_clock_settime - .long sys_clock_gettime /* 265 */ - .long sys_clock_getres - .long sys_clock_nanosleep + .long sys_set_tid_address + .long sys_timer_create + .long sys_timer_settime /* 260 */ + .long sys_timer_gettime + .long sys_timer_getoverrun + .long sys_timer_delete + .long sys_clock_settime + .long sys_clock_gettime /* 265 */ + .long sys_clock_getres + .long sys_clock_nanosleep .long sys_statfs64 - .long sys_fstatfs64 - .long sys_tgkill /* 270 */ + .long sys_fstatfs64 + .long sys_tgkill /* 270 */ .long sys_utimes - .long sys_fadvise64_64 + .long sys_fadvise64_64 .long sys_ni_syscall /* sys_vserver */ .long sys_ni_syscall /* sys_mbind */ .long sys_ni_syscall /* 275 sys_get_mempolicy */ @@ -886,7 +886,7 @@ sys_call_table: .long sys_mq_timedreceive /* 280 */ .long sys_mq_notify .long sys_mq_getsetattr - .long sys_ni_syscall /* reserved for kexec */ + .long sys_ni_syscall .long sys_waitid .long sys_ni_syscall /* 285 */ /* available */ .long sys_add_key @@ -939,6 +939,22 @@ sys_call_table: .long sys_preadv .long sys_pwritev .long sys_setns /* 335 */ + .long sys_name_to_handle_at + .long sys_open_by_handle_at + .long sys_rt_tgsigqueueinfo + .long sys_perf_event_open + .long sys_recvmmsg /* 340 */ + .long sys_accept4 + .long sys_fanotify_init + .long sys_fanotify_mark + .long sys_prlimit64 + .long sys_clock_adjtime /* 345 */ + .long sys_syncfs + .long sys_sendmmsg + .long sys_process_vm_readv + .long sys_process_vm_writev + .long sys_kcmp /* 350 */ + .long sys_finit_module /* * NOTE!! This doesn't have to be exact - we just have @@ -950,4 +966,4 @@ sys_call_table: .rept NR_syscalls-(.-sys_call_table)/4 .long sys_ni_syscall .endr - + diff --git a/arch/cris/arch-v32/kernel/entry.S b/arch/cris/arch-v32/kernel/entry.S index faa644111fe..2f19ac6217a 100644 --- a/arch/cris/arch-v32/kernel/entry.S +++ b/arch/cris/arch-v32/kernel/entry.S @@ -424,7 +424,7 @@ nmi_interrupt: bpl 1f nop jsr handle_watchdog_bite ; In time.c. - move.d $sp, $r10 ; Pointer to registers + move.d $sp, $r10 ; Pointer to registers 1: btstq REG_BIT(intr_vect, r_nmi, ext), $r0 bpl 1f nop @@ -452,7 +452,7 @@ spurious_interrupt: nop ;; This handles the case when multiple interrupts arrive at the same - ;; time. Jump to the first set interrupt bit in a priotiry fashion. The + ;; time. Jump to the first set interrupt bit in a priority fashion. The ;; hardware will call the unserved interrupts after the handler ;; finishes. .type multiple_interrupt, @function @@ -885,13 +885,29 @@ sys_call_table: .long sys_preadv .long sys_pwritev .long sys_setns /* 335 */ - - /* - * NOTE!! This doesn't have to be exact - we just have - * to make sure we have _enough_ of the "sys_ni_syscall" - * entries. Don't panic if you notice that this hasn't - * been shrunk every time we add a new system call. - */ + .long sys_name_to_handle_at + .long sys_open_by_handle_at + .long sys_rt_tgsigqueueinfo + .long sys_perf_event_open + .long sys_recvmmsg /* 340 */ + .long sys_accept4 + .long sys_fanotify_init + .long sys_fanotify_mark + .long sys_prlimit64 + .long sys_clock_adjtime /* 345 */ + .long sys_syncfs + .long sys_sendmmsg + .long sys_process_vm_readv + .long sys_process_vm_writev + .long sys_kcmp /* 350 */ + .long sys_finit_module + + /* + * NOTE!! This doesn't have to be exact - we just have + * to make sure we have _enough_ of the "sys_ni_syscall" + * entries. Don't panic if you notice that this hasn't + * been shrunk every time we add a new system call. + */ .rept NR_syscalls - (.-sys_call_table) / 4 .long sys_ni_syscall diff --git a/arch/cris/include/asm/unistd.h b/arch/cris/include/asm/unistd.h index 0ff3f688984..5cc7d1991e4 100644 --- a/arch/cris/include/asm/unistd.h +++ b/arch/cris/include/asm/unistd.h @@ -4,7 +4,7 @@ #include -#define NR_syscalls 336 +#define NR_syscalls 360 #include diff --git a/arch/cris/include/uapi/asm/unistd.h b/arch/cris/include/uapi/asm/unistd.h index 48842896f6c..f3287face44 100644 --- a/arch/cris/include/uapi/asm/unistd.h +++ b/arch/cris/include/uapi/asm/unistd.h @@ -340,5 +340,21 @@ #define __NR_preadv 333 #define __NR_pwritev 334 #define __NR_setns 335 +#define __NR_name_to_handle_at 336 +#define __NR_open_by_handle_at 337 +#define __NR_rt_tgsigqueueinfo 338 +#define __NR_perf_event_open 339 +#define __NR_recvmmsg 340 +#define __NR_accept4 341 +#define __NR_fanotify_init 342 +#define __NR_fanotify_mark 343 +#define __NR_prlimit64 344 +#define __NR_clock_adjtime 345 +#define __NR_syncfs 346 +#define __NR_sendmmsg 347 +#define __NR_process_vm_readv 348 +#define __NR_process_vm_writev 349 +#define __NR_kcmp 350 +#define __NR_finit_module 351 #endif /* _UAPI_ASM_CRIS_UNISTD_H_ */ -- cgit v1.2.3-18-g5258 From e7672be573afa078e8d85d5ad0202b78bd6bd1fd Mon Sep 17 00:00:00 2001 From: Jesper Nilsson Date: Thu, 9 Jan 2014 17:18:51 +0100 Subject: Cleanup whitespace, remove old author tag Signed-off-by: Jesper Nilsson --- arch/cris/arch-v10/kernel/head.S | 124 +++++++++++++++++++-------------------- 1 file changed, 61 insertions(+), 63 deletions(-) (limited to 'arch/cris') diff --git a/arch/cris/arch-v10/kernel/head.S b/arch/cris/arch-v10/kernel/head.S index a1f2014b4e3..137bf52a559 100644 --- a/arch/cris/arch-v10/kernel/head.S +++ b/arch/cris/arch-v10/kernel/head.S @@ -1,12 +1,10 @@ /* * Head of the kernel - alter with care * - * Copyright (C) 2000, 2001 Axis Communications AB + * Copyright (C) 2000, 2001, 2010 Axis Communications AB * - * Authors: Bjorn Wesen (bjornw@axis.com) - * */ - + #define ASSEMBLER_MACROS_ONLY /* The IO_* macros use the ## token concatenation operator, so -traditional must not be used when assembling this file. */ @@ -18,15 +16,15 @@ #define START_ETHERNET_CLOCK IO_STATE(R_NETWORK_GEN_CONFIG, enable, on) |\ IO_STATE(R_NETWORK_GEN_CONFIG, phy, mii_clk) - + ;; exported symbols - + .globl etrax_irv .globl romfs_start .globl romfs_length .globl romfs_in_flash .globl swapper_pg_dir - + .text ;; This is the entry point of the kernel. We are in supervisor mode. @@ -35,10 +33,10 @@ ;; put a nop (2 bytes) here first so we dont accidentally skip the di ;; ;; NOTICE! The registers r8 and r9 are used as parameters carrying - ;; information from the decompressor (if the kernel was compressed). + ;; information from the decompressor (if the kernel was compressed). ;; They should not be used in the code below until read. - - nop + + nop di ;; First setup the kseg_c mapping from where the kernel is linked @@ -58,19 +56,19 @@ #ifdef CONFIG_CRIS_LOW_MAP ; kseg mappings, temporary map of 0xc0->0x40 - move.d IO_FIELD (R_MMU_KBASE_HI, base_c, 4) \ + move.d IO_FIELD (R_MMU_KBASE_HI, base_c, 4) \ | IO_FIELD (R_MMU_KBASE_HI, base_b, 0xb) \ | IO_FIELD (R_MMU_KBASE_HI, base_9, 9) \ | IO_FIELD (R_MMU_KBASE_HI, base_8, 8), $r0 move.d $r0, [R_MMU_KBASE_HI] - ; temporary map of 0x40->0x40 and 0x60->0x40 - move.d IO_FIELD (R_MMU_KBASE_LO, base_6, 4) \ + ; temporary map of 0x40->0x40 and 0x60->0x40 + move.d IO_FIELD (R_MMU_KBASE_LO, base_6, 4) \ | IO_FIELD (R_MMU_KBASE_LO, base_4, 4), $r0 move.d $r0, [R_MMU_KBASE_LO] ; mmu enable, segs e,c,b,a,6,5,4,0 segment mapped - move.d IO_STATE (R_MMU_CONFIG, mmu_enable, enable) \ + move.d IO_STATE (R_MMU_CONFIG, mmu_enable, enable) \ | IO_STATE (R_MMU_CONFIG, inv_excp, enable) \ | IO_STATE (R_MMU_CONFIG, acc_excp, enable) \ | IO_STATE (R_MMU_CONFIG, we_excp, enable) \ @@ -93,17 +91,17 @@ move.d $r0, [R_MMU_CONFIG] #else ; kseg mappings - move.d IO_FIELD (R_MMU_KBASE_HI, base_e, 8) \ + move.d IO_FIELD (R_MMU_KBASE_HI, base_e, 8) \ | IO_FIELD (R_MMU_KBASE_HI, base_c, 4) \ | IO_FIELD (R_MMU_KBASE_HI, base_b, 0xb), $r0 move.d $r0, [R_MMU_KBASE_HI] - ; temporary map of 0x40->0x40 and 0x00->0x00 + ; temporary map of 0x40->0x40 and 0x00->0x00 move.d IO_FIELD (R_MMU_KBASE_LO, base_4, 4), $r0 move.d $r0, [R_MMU_KBASE_LO] ; mmu enable, segs f,e,c,b,4,0 segment mapped - move.d IO_STATE (R_MMU_CONFIG, mmu_enable, enable) \ + move.d IO_STATE (R_MMU_CONFIG, mmu_enable, enable) \ | IO_STATE (R_MMU_CONFIG, inv_excp, enable) \ | IO_STATE (R_MMU_CONFIG, acc_excp, enable) \ | IO_STATE (R_MMU_CONFIG, we_excp, enable) \ @@ -141,12 +139,12 @@ ;; ;; In both cases, we start in un-cached mode, and need to jump into a ;; cached PC after we're done fiddling around with the segments. - ;; + ;; ;; arch/etrax100/etrax100.ld sets some symbols that define the start ;; and end of each segment. ;; Check if we start from DRAM or FLASH by testing PC - + move.d $pc,$r0 and.d 0x7fffffff,$r0 ; get rid of the non-cache bit cmp.d 0x10000,$r0 ; arbitrary... just something above this code @@ -163,7 +161,7 @@ _inflash0: ;; after init. .section ".init.text", "ax" _inflash: -#ifdef CONFIG_ETRAX_ETHERNET +#ifdef CONFIG_ETRAX_ETHERNET ;; Start MII clock to make sure it is running when tranceiver is reset move.d START_ETHERNET_CLOCK, $r0 move.d $r0, [R_NETWORK_GEN_CONFIG] @@ -183,10 +181,10 @@ _inflash: cmp.d RAM_INIT_MAGIC, $r8 ; Already initialized? beq _dram_init_finished nop - + #include "../lib/dram_init.S" -_dram_init_finished: +_dram_init_finished: ;; Copy text+data to DRAM ;; This is fragile - the calculation of r4 as the image size depends ;; on that the labels below actually are the first and last positions @@ -198,7 +196,7 @@ _dram_init_finished: ;; between the physical start of the flash and the flash-image start, ;; and when run with compression, the kernel is actually unpacked to ;; DRAM and we never get here in the first place :)) - + moveq 0, $r0 ; source move.d text_start, $r1 ; destination move.d __vmlinux_end, $r2 ; end destination @@ -229,10 +227,10 @@ _dram_init_finished: add.d 0xf0000000, $r4 ; add flash start in virtual memory (cached) #endif move.d $r4, [romfs_start] -1: +1: moveq 1, $r0 move.d $r0, [romfs_in_flash] - + jump _start_it ; enter code, cached this time _inram: @@ -241,7 +239,7 @@ _inram: moveq 0, $r0 move.d $r0, [romfs_length] ; default if there is no cramfs - + ;; The kernel could have been unpacked to DRAM by the loader, but ;; the cramfs image could still be in the Flash directly after the ;; compressed kernel image. The loader passes the address of the @@ -251,7 +249,7 @@ _inram: ;; (Notice that if this is not booted from the loader, r9 will be ;; garbage but we do sanity checks on it, the chance that it points ;; to a cramfs magic is small.. ) - + cmp.d 0x0ffffff8, $r9 bhs _no_romfs_in_flash ; r9 points outside the flash area nop @@ -274,7 +272,7 @@ _inram: jump _start_it ; enter code, cached this time _no_romfs_in_flash: - + ;; Check if there is a cramfs (magic value). ;; Notice that we check for cramfs magic value - which is ;; the "rom fs" we'll possibly use in 2.4 if not JFFS (which does @@ -286,8 +284,8 @@ _no_romfs_in_flash: bne 2f nop - ;; Ok. What is its size ? - + ;; Ok. What is its size ? + move.d [$r0 + 4], $r2 ; cramfs_super.size (again, no need to swapwb) ;; We want to copy it to the end of the BSS @@ -303,7 +301,7 @@ _no_romfs_in_flash: add.d $r2, $r0 add.d $r2, $r1 - + ;; Go ahead. Make my loop. lsrq 1, $r2 ; size is in bytes, we copy words @@ -314,14 +312,14 @@ _no_romfs_in_flash: bne 1b nop -2: +2: ;; Dont worry that the BSS is tainted. It will be cleared later. moveq 0, $r0 move.d $r0, [romfs_in_flash] jump _start_it ; better skip the additional cramfs check below - + _start_it: ;; Check if kernel command line is supplied @@ -348,7 +346,7 @@ no_command_line: move.d ibr_start,$r0 ; this symbol is set by the linker script move $r0,$ibr move.d $r0,[etrax_irv] ; set the interrupt base register and pointer - + ;; Clear BSS region, from _bss_start to _end move.d __bss_start, $r0 @@ -357,7 +355,7 @@ no_command_line: cmp.d $r1, $r0 blo 1b nop - + #ifdef CONFIG_BLK_DEV_ETRAXIDE ;; disable ATA before enabling it in genconfig below moveq 0,$r0 @@ -380,7 +378,7 @@ no_command_line: #ifdef CONFIG_JULIETTE ;; configure external DMA channel 0 before enabling it in genconfig - + moveq 0,$r0 move.d $r0,[R_EXT_DMA_0_ADDR] ; cnt enable, word size, output, stop, size 0 @@ -395,7 +393,7 @@ no_command_line: move.d $r0,[R_EXT_DMA_0_CMD] ;; reset dma4 and wait for completion - + moveq IO_STATE (R_DMA_CH4_CMD, cmd, reset),$r0 move.b $r0,[R_DMA_CH4_CMD] 1: move.b [R_DMA_CH4_CMD],$r0 @@ -405,7 +403,7 @@ no_command_line: nop ;; reset dma5 and wait for completion - + moveq IO_STATE (R_DMA_CH5_CMD, cmd, reset),$r0 move.b $r0,[R_DMA_CH5_CMD] 1: move.b [R_DMA_CH5_CMD],$r0 @@ -413,8 +411,8 @@ no_command_line: cmp.b IO_STATE (R_DMA_CH5_CMD, cmd, reset),$r0 beq 1b nop -#endif - +#endif + ;; Etrax product HW genconfig setup moveq 0,$r0 @@ -486,7 +484,7 @@ no_command_line: beq 1b nop #endif - + moveq IO_STATE (R_DMA_CH8_CMD, cmd, reset),$r0 move.b $r0,[R_DMA_CH8_CMD] ; reset (ser1 dma out) move.b $r0,[R_DMA_CH9_CMD] ; reset (ser1 dma in) @@ -503,7 +501,7 @@ no_command_line: ;; setup port PA and PB default initial directions and data ;; including their shadow registers - + move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR,$r0 #if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_PA7) or.b IO_STATE (R_PORT_PA_DIR, dir7, output),$r0 @@ -520,7 +518,7 @@ no_command_line: #endif move.b $r0,[port_pa_data_shadow] move.b $r0,[R_PORT_PA_DATA] - + move.b CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG,$r0 move.b $r0,[port_pb_config_shadow] move.b $r0,[R_PORT_PB_CONFIG] @@ -562,13 +560,13 @@ no_command_line: #endif move.d $r0,[port_g_data_shadow] move.d $r0,[R_PORT_G_DATA] - + ;; setup the serial port 0 at 115200 baud for debug purposes - + moveq IO_STATE (R_SERIAL0_XOFF, tx_stop, enable) \ | IO_STATE (R_SERIAL0_XOFF, auto_xoff, disable) \ | IO_FIELD (R_SERIAL0_XOFF, xoff_char, 0),$r0 - move.d $r0,[R_SERIAL0_XOFF] + move.d $r0,[R_SERIAL0_XOFF] ; 115.2kbaud for both transmit and receive move.b IO_STATE (R_SERIAL0_BAUD, tr_baud, c115k2Hz) \ @@ -584,8 +582,8 @@ no_command_line: | IO_STATE (R_SERIAL0_REC_CTRL, rec_par, even) \ | IO_STATE (R_SERIAL0_REC_CTRL, rec_par_en, disable) \ | IO_STATE (R_SERIAL0_REC_CTRL, rec_bitnr, rec_8bit),$r0 - move.b $r0,[R_SERIAL0_REC_CTRL] - + move.b $r0,[R_SERIAL0_REC_CTRL] + ; Set up and enable the serial0 transmitter. move.b IO_FIELD (R_SERIAL0_TR_CTRL, txd, 0) \ | IO_STATE (R_SERIAL0_TR_CTRL, tr_enable, enable) \ @@ -598,11 +596,11 @@ no_command_line: move.b $r0,[R_SERIAL0_TR_CTRL] ;; setup the serial port 1 at 115200 baud for debug purposes - + moveq IO_STATE (R_SERIAL1_XOFF, tx_stop, enable) \ | IO_STATE (R_SERIAL1_XOFF, auto_xoff, disable) \ | IO_FIELD (R_SERIAL1_XOFF, xoff_char, 0),$r0 - move.d $r0,[R_SERIAL1_XOFF] + move.d $r0,[R_SERIAL1_XOFF] ; 115.2kbaud for both transmit and receive move.b IO_STATE (R_SERIAL1_BAUD, tr_baud, c115k2Hz) \ @@ -618,8 +616,8 @@ no_command_line: | IO_STATE (R_SERIAL1_REC_CTRL, rec_par, even) \ | IO_STATE (R_SERIAL1_REC_CTRL, rec_par_en, disable) \ | IO_STATE (R_SERIAL1_REC_CTRL, rec_bitnr, rec_8bit),$r0 - move.b $r0,[R_SERIAL1_REC_CTRL] - + move.b $r0,[R_SERIAL1_REC_CTRL] + ; Set up and enable the serial1 transmitter. move.b IO_FIELD (R_SERIAL1_TR_CTRL, txd, 0) \ | IO_STATE (R_SERIAL1_TR_CTRL, tr_enable, enable) \ @@ -666,14 +664,14 @@ no_command_line: | IO_STATE (R_SERIAL2_TR_CTRL, tr_bitnr, tr_8bit),$r0 move.b $r0,[R_SERIAL2_TR_CTRL] #endif - -#ifdef CONFIG_ETRAX_SERIAL_PORT3 + +#ifdef CONFIG_ETRAX_SERIAL_PORT3 ;; setup the serial port 3 at 115200 baud for debug purposes - + moveq IO_STATE (R_SERIAL3_XOFF, tx_stop, enable) \ | IO_STATE (R_SERIAL3_XOFF, auto_xoff, disable) \ | IO_FIELD (R_SERIAL3_XOFF, xoff_char, 0),$r0 - move.d $r0,[R_SERIAL3_XOFF] + move.d $r0,[R_SERIAL3_XOFF] ; 115.2kbaud for both transmit and receive move.b IO_STATE (R_SERIAL3_BAUD, tr_baud, c115k2Hz) \ @@ -689,8 +687,8 @@ no_command_line: | IO_STATE (R_SERIAL3_REC_CTRL, rec_par, even) \ | IO_STATE (R_SERIAL3_REC_CTRL, rec_par_en, disable) \ | IO_STATE (R_SERIAL3_REC_CTRL, rec_bitnr, rec_8bit),$r0 - move.b $r0,[R_SERIAL3_REC_CTRL] - + move.b $r0,[R_SERIAL3_REC_CTRL] + ; Set up and enable the serial3 transmitter. move.b IO_FIELD (R_SERIAL3_TR_CTRL, txd, 0) \ | IO_STATE (R_SERIAL3_TR_CTRL, tr_enable, enable) \ @@ -702,13 +700,13 @@ no_command_line: | IO_STATE (R_SERIAL3_TR_CTRL, tr_bitnr, tr_8bit),$r0 move.b $r0,[R_SERIAL3_TR_CTRL] #endif - + #endif /* CONFIG_SVINTO_SIM */ jump start_kernel ; jump into the C-function start_kernel in init/main.c - + .data -etrax_irv: +etrax_irv: .dword 0 romfs_start: .dword 0 @@ -716,13 +714,13 @@ romfs_length: .dword 0 romfs_in_flash: .dword 0 - + ;; put some special pages at the beginning of the kernel aligned ;; to page boundaries - the kernel cannot start until after this #ifdef CONFIG_CRIS_LOW_MAP swapper_pg_dir = 0x60002000 -#else +#else swapper_pg_dir = 0xc0002000 #endif -- cgit v1.2.3-18-g5258 From 93ea02bb84354370e51de803a9405f171f3edf88 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 6 Nov 2013 14:57:36 +0100 Subject: arch: Clean up asm/barrier.h implementations using asm-generic/barrier.h We're going to be adding a few new barrier primitives, and in order to avoid endless duplication make more agressive use of asm-generic/barrier.h. Change the asm-generic/barrier.h such that it allows partial barrier definitions and fills out the rest with defaults. There are a few architectures (m32r, m68k) that could probably do away with their barrier.h file entirely but are kept for now due to their unconventional nop() implementation. Suggested-by: Geert Uytterhoeven Reviewed-by: "Paul E. McKenney" Reviewed-by: Mathieu Desnoyers Signed-off-by: Peter Zijlstra Cc: Michael Ellerman Cc: Michael Neuling Cc: Russell King Cc: Heiko Carstens Cc: Linus Torvalds Cc: Martin Schwidefsky Cc: Victor Kaplansky Cc: Tony Luck Cc: Oleg Nesterov Cc: Benjamin Herrenschmidt Cc: Frederic Weisbecker Link: http://lkml.kernel.org/r/20131213150640.846368594@infradead.org Signed-off-by: Ingo Molnar --- arch/cris/include/asm/Kbuild | 1 + arch/cris/include/asm/barrier.h | 25 ------------------------- 2 files changed, 1 insertion(+), 25 deletions(-) delete mode 100644 arch/cris/include/asm/barrier.h (limited to 'arch/cris') diff --git a/arch/cris/include/asm/Kbuild b/arch/cris/include/asm/Kbuild index b06caf649a9..35ec2e5ca83 100644 --- a/arch/cris/include/asm/Kbuild +++ b/arch/cris/include/asm/Kbuild @@ -12,3 +12,4 @@ generic-y += trace_clock.h generic-y += vga.h generic-y += xor.h generic-y += preempt.h +generic-y += barrier.h diff --git a/arch/cris/include/asm/barrier.h b/arch/cris/include/asm/barrier.h deleted file mode 100644 index 198ad7fa6b2..00000000000 --- a/arch/cris/include/asm/barrier.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef __ASM_CRIS_BARRIER_H -#define __ASM_CRIS_BARRIER_H - -#define nop() __asm__ __volatile__ ("nop"); - -#define barrier() __asm__ __volatile__("": : :"memory") -#define mb() barrier() -#define rmb() mb() -#define wmb() mb() -#define read_barrier_depends() do { } while(0) -#define set_mb(var, value) do { var = value; mb(); } while (0) - -#ifdef CONFIG_SMP -#define smp_mb() mb() -#define smp_rmb() rmb() -#define smp_wmb() wmb() -#define smp_read_barrier_depends() read_barrier_depends() -#else -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() -#define smp_read_barrier_depends() do { } while(0) -#endif - -#endif /* __ASM_CRIS_BARRIER_H */ -- cgit v1.2.3-18-g5258 From 6806afc9aa1000db598e31164d2ef505be3b3075 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Tue, 14 Jan 2014 16:37:45 +1100 Subject: net: resort some Kbuild files to hopefully help avoid some conflicts Signed-off-by: Stephen Rothwell Signed-off-by: David S. Miller --- arch/cris/include/asm/Kbuild | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/cris') diff --git a/arch/cris/include/asm/Kbuild b/arch/cris/include/asm/Kbuild index c5963b3e462..406cbd3ebd5 100644 --- a/arch/cris/include/asm/Kbuild +++ b/arch/cris/include/asm/Kbuild @@ -5,6 +5,7 @@ header-y += arch-v32/ generic-y += clkdev.h generic-y += exec.h +generic-y += hash.h generic-y += kvm_para.h generic-y += linkage.h generic-y += module.h @@ -12,4 +13,3 @@ generic-y += trace_clock.h generic-y += vga.h generic-y += xor.h generic-y += preempt.h -generic-y += hash.h -- cgit v1.2.3-18-g5258 From f549ed1abc7e4f0292ce08c4143c64a610c8b2cb Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Tue, 14 Jan 2014 16:36:10 +1100 Subject: arch: Re-sort some Kbuild files to hopefully help avoid some conflicts Checkin: 93ea02bb8435 arch: Clean up asm/barrier.h implementations using asm-generic/barrier.h ... unfortunately left some Kbuild files out of order, which caused unnecessary merge conflicts, in particular with checkin: e3fec2f74f7f lib: Add missing arch generic-y entries for asm-generic/hash.h Put them back in order to make the upcoming merges cleaner. Signed-off-by: Stephen Rothwell Link: http://lkml.kernel.org/r/20140114164420.d296fbcc4be3a5f126c86069@canb.auug.org.au Signed-off-by: H. Peter Anvin Cc: Geert Uytterhoeven Cc: "Paul E. McKenney" Cc: Mathieu Desnoyers Cc: Peter Zijlstra Cc: David Miller --- arch/cris/include/asm/Kbuild | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/cris') diff --git a/arch/cris/include/asm/Kbuild b/arch/cris/include/asm/Kbuild index 35ec2e5ca83..199b1a9dab8 100644 --- a/arch/cris/include/asm/Kbuild +++ b/arch/cris/include/asm/Kbuild @@ -3,6 +3,7 @@ header-y += arch-v10/ header-y += arch-v32/ +generic-y += barrier.h generic-y += clkdev.h generic-y += exec.h generic-y += kvm_para.h @@ -12,4 +13,3 @@ generic-y += trace_clock.h generic-y += vga.h generic-y += xor.h generic-y += preempt.h -generic-y += barrier.h -- cgit v1.2.3-18-g5258 From e269a869417cd4053b37da1b19186902d3cbf63b Mon Sep 17 00:00:00 2001 From: Jesper Nilsson Date: Wed, 15 Jan 2014 14:42:37 +0100 Subject: Drop code for CRISv10 CPU simulator That simulator is dead and redundant. Signed-off-by: Jesper Nilsson --- arch/cris/Kconfig | 6 --- arch/cris/arch-v10/kernel/Makefile | 1 - arch/cris/arch-v10/kernel/debugport.c | 7 --- arch/cris/arch-v10/kernel/entry.S | 4 +- arch/cris/arch-v10/kernel/head.S | 5 -- arch/cris/arch-v10/kernel/irq.c | 18 ++----- arch/cris/arch-v10/kernel/process.c | 5 +- arch/cris/arch-v10/kernel/time.c | 92 +++++++++++++++-------------------- arch/cris/arch-v10/lib/dram_init.S | 40 +++++++-------- arch/cris/boot/rescue/kimagerescue.S | 2 - arch/cris/include/arch-v10/arch/io.h | 29 +---------- 11 files changed, 66 insertions(+), 143 deletions(-) (limited to 'arch/cris') diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig index 9c957c81c68..ed0fcdf7e99 100644 --- a/arch/cris/Kconfig +++ b/arch/cris/Kconfig @@ -122,12 +122,6 @@ config ETRAX100LX_V2 help Support version 2 of the ETRAX 100LX. -config SVINTO_SIM - bool "ETRAX-100LX-for-xsim-simulator" - select ARCH_USES_GETTIMEOFFSET - help - Support the xsim ETRAX Simulator. - config ETRAXFS bool "ETRAX-FS-V32" help diff --git a/arch/cris/arch-v10/kernel/Makefile b/arch/cris/arch-v10/kernel/Makefile index dcfec41d353..4841e822cdd 100644 --- a/arch/cris/arch-v10/kernel/Makefile +++ b/arch/cris/arch-v10/kernel/Makefile @@ -1,4 +1,3 @@ -# $Id: Makefile,v 1.6 2004/12/13 12:21:51 starvik Exp $ # # Makefile for the linux kernel. # diff --git a/arch/cris/arch-v10/kernel/debugport.c b/arch/cris/arch-v10/kernel/debugport.c index f932c85fbde..7d307cce8bd 100644 --- a/arch/cris/arch-v10/kernel/debugport.c +++ b/arch/cris/arch-v10/kernel/debugport.c @@ -19,7 +19,6 @@ #include #include #include -#include /* Get SIMCOUT. */ extern void reset_watchdog(void); @@ -318,12 +317,6 @@ console_write(struct console *co, const char *buf, unsigned int len) if (!port) return; -#ifdef CONFIG_SVINTO_SIM - /* no use to simulate the serial debug output */ - SIMCOUT(buf, len); - return; -#endif - console_write_direct(co, buf, len); } diff --git a/arch/cris/arch-v10/kernel/entry.S b/arch/cris/arch-v10/kernel/entry.S index def0a530e9d..81570fcd041 100644 --- a/arch/cris/arch-v10/kernel/entry.S +++ b/arch/cris/arch-v10/kernel/entry.S @@ -457,7 +457,7 @@ IRQ1_interrupt: ba _Rexit ; Return the standard way nop wdog: -#if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM) +#if defined(CONFIG_ETRAX_WATCHDOG) ;; Check if we're waiting for reset to happen, as signalled by ;; hard_reset_now setting cause_of_death to a magic value. If so, just ;; get stuck until reset happens. @@ -523,7 +523,7 @@ _watchdogmsg: .ascii "Oops: bitten by watchdog\n\0" .previous -#endif /* CONFIG_ETRAX_WATCHDOG and not CONFIG_SVINTO_SIM */ +#endif /* CONFIG_ETRAX_WATCHDOG */ spurious_interrupt: di diff --git a/arch/cris/arch-v10/kernel/head.S b/arch/cris/arch-v10/kernel/head.S index 137bf52a559..4a146e1749c 100644 --- a/arch/cris/arch-v10/kernel/head.S +++ b/arch/cris/arch-v10/kernel/head.S @@ -168,13 +168,11 @@ _inflash: #endif ;; Set up waitstates etc according to kernel configuration. -#ifndef CONFIG_SVINTO_SIM move.d CONFIG_ETRAX_DEF_R_WAITSTATES, $r0 move.d $r0, [R_WAITSTATES] move.d CONFIG_ETRAX_DEF_R_BUS_CONFIG, $r0 move.d $r0, [R_BUS_CONFIG] -#endif ;; We need to initialze DRAM registers before we start using the DRAM @@ -466,7 +464,6 @@ no_command_line: move.d $r0,[genconfig_shadow] ; init a shadow register of R_GEN_CONFIG -#ifndef CONFIG_SVINTO_SIM move.d $r0,[R_GEN_CONFIG] #if 0 @@ -701,8 +698,6 @@ no_command_line: move.b $r0,[R_SERIAL3_TR_CTRL] #endif -#endif /* CONFIG_SVINTO_SIM */ - jump start_kernel ; jump into the C-function start_kernel in init/main.c .data diff --git a/arch/cris/arch-v10/kernel/irq.c b/arch/cris/arch-v10/kernel/irq.c index ba0e5965d6e..09cae80a834 100644 --- a/arch/cris/arch-v10/kernel/irq.c +++ b/arch/cris/arch-v10/kernel/irq.c @@ -5,7 +5,7 @@ * * Authors: Bjorn Wesen (bjornw@axis.com) * - * This file contains the interrupt vectors and some + * This file contains the interrupt vectors and some * helper functions * */ @@ -182,19 +182,14 @@ void do_multiple_IRQ(struct pt_regs* regs) setting the irq vector table. */ -void __init -init_IRQ(void) +void __init init_IRQ(void) { int i; /* clear all interrupt masks */ - -#ifndef CONFIG_SVINTO_SIM *R_IRQ_MASK0_CLR = 0xffffffff; *R_IRQ_MASK1_CLR = 0xffffffff; *R_IRQ_MASK2_CLR = 0xffffffff; -#endif - *R_VECT_MASK_CLR = 0xffffffff; for (i = 0; i < 256; i++) @@ -211,25 +206,20 @@ init_IRQ(void) executed by the associated break handler, rather than just a jump address. therefore we need to setup a default breakpoint handler for all breakpoints */ - for (i = 0; i < 16; i++) set_break_vector(i, do_sigtrap); - - /* except IRQ 15 which is the multiple-IRQ handler on Etrax100 */ + /* except IRQ 15 which is the multiple-IRQ handler on Etrax100 */ set_int_vector(15, multiple_interrupt); - - /* 0 and 1 which are special breakpoint/NMI traps */ + /* 0 and 1 which are special breakpoint/NMI traps */ set_int_vector(0, hwbreakpoint); set_int_vector(1, IRQ1_interrupt); /* and irq 14 which is the mmu bus fault handler */ - set_int_vector(14, mmu_bus_fault); /* setup the system-call trap, which is reached by BREAK 13 */ - set_break_vector(13, system_call); /* setup a breakpoint handler for debugging used for both user and diff --git a/arch/cris/arch-v10/kernel/process.c b/arch/cris/arch-v10/kernel/process.c index 753e9a03cf8..c20e4e8c366 100644 --- a/arch/cris/arch-v10/kernel/process.c +++ b/arch/cris/arch-v10/kernel/process.c @@ -14,7 +14,6 @@ #include #include #include -#include #include #include #include @@ -56,14 +55,14 @@ void hard_reset_now (void) * code to know about it than the watchdog handler in entry.S and * this code, implementing hard reset through the watchdog. */ -#if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM) +#if defined(CONFIG_ETRAX_WATCHDOG) extern int cause_of_death; #endif printk("*** HARD RESET ***\n"); local_irq_disable(); -#if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM) +#if defined(CONFIG_ETRAX_WATCHDOG) cause_of_death = 0xbedead; #else /* Since we dont plan to keep on resetting the watchdog, diff --git a/arch/cris/arch-v10/kernel/time.c b/arch/cris/arch-v10/kernel/time.c index e6a722715a8..b5eb5cd2f60 100644 --- a/arch/cris/arch-v10/kernel/time.c +++ b/arch/cris/arch-v10/kernel/time.c @@ -14,7 +14,6 @@ #include #include #include -#include #include #include #include @@ -34,7 +33,7 @@ unsigned long get_ns_in_jiffie(void) local_irq_save(flags); timer_count = *R_TIMER0_DATA; - presc_count = *R_TIM_PRESC_STATUS; + presc_count = *R_TIM_PRESC_STATUS; /* presc_count might be wrapped */ t1 = *R_TIMER0_DATA; @@ -50,7 +49,7 @@ unsigned long get_ns_in_jiffie(void) presc_count = PRESCALE_VALUE - presc_count - PRESCALE_VALUE/2; } - ns = ( (TIMER0_DIV - timer_count) * ((1000000000/HZ)/TIMER0_DIV )) + + ns = ( (TIMER0_DIV - timer_count) * ((1000000000/HZ)/TIMER0_DIV )) + ( (presc_count) * (1000000000/PRESCALE_FREQ)); return ns; } @@ -80,7 +79,7 @@ static u32 cris_v10_gettimeoffset(void) * by the R_WATCHDOG register. The R_WATCHDOG register contains an enable bit * and a 3-bit key value. The effect of writing to the R_WATCHDOG register is * described in the table below: - * + * * Watchdog Value written: * state: To enable: To key: Operation: * -------- ---------- ------- ---------- @@ -89,15 +88,15 @@ static u32 cris_v10_gettimeoffset(void) * started 0 ~key Stop watchdog * started 1 ~key Restart watchdog with key = ~key. * started X new_key_val Change key to new_key_val. - * + * * Note: '~' is the bitwise NOT operator. - * + * */ /* right now, starting the watchdog is the same as resetting it */ #define start_watchdog reset_watchdog -#if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM) +#ifdef CONFIG_ETRAX_WATCHDOG static int watchdog_key = 0; /* arbitrary number */ #endif @@ -107,10 +106,9 @@ static int watchdog_key = 0; /* arbitrary number */ #define WATCHDOG_MIN_FREE_PAGES 8 -void -reset_watchdog(void) +void reset_watchdog(void) { -#if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM) +#if defined(CONFIG_ETRAX_WATCHDOG) /* only keep watchdog happy as long as we have memory left! */ if(nr_free_pages() > WATCHDOG_MIN_FREE_PAGES) { /* reset the watchdog with the inverse of the old key */ @@ -123,28 +121,23 @@ reset_watchdog(void) /* stop the watchdog - we still need the correct key */ -void -stop_watchdog(void) +void stop_watchdog(void) { -#if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM) +#ifdef CONFIG_ETRAX_WATCHDOG watchdog_key ^= 0x7; /* invert key, which is 3 bits */ *R_WATCHDOG = IO_FIELD(R_WATCHDOG, key, watchdog_key) | IO_STATE(R_WATCHDOG, enable, stop); -#endif +#endif } +extern void cris_do_profile(struct pt_regs *regs); + /* * timer_interrupt() needs to keep up the real-time clock, * as well as call the "xtime_update()" routine every clocktick */ - -//static unsigned short myjiff; /* used by our debug routine print_timestamp */ - -extern void cris_do_profile(struct pt_regs *regs); - -static inline irqreturn_t -timer_interrupt(int irq, void *dev_id) +static inline irqreturn_t timer_interrupt(int irq, void *dev_id) { struct pt_regs *regs = get_irq_regs(); /* acknowledge the timer irq */ @@ -160,20 +153,18 @@ timer_interrupt(int irq, void *dev_id) IO_STATE( R_TIMER_CTRL, tm0, run) | IO_STATE( R_TIMER_CTRL, clksel0, c6250kHz); #else - *R_TIMER_CTRL = r_timer_ctrl_shadow | - IO_STATE(R_TIMER_CTRL, i0, clr); + *R_TIMER_CTRL = r_timer_ctrl_shadow | IO_STATE(R_TIMER_CTRL, i0, clr); #endif /* reset watchdog otherwise it resets us! */ reset_watchdog(); - + /* Update statistics. */ update_process_times(user_mode(regs)); /* call the real timer interrupt handler */ - xtime_update(1); - + cris_do_profile(regs); /* Save profiling information */ return IRQ_HANDLED; } @@ -186,16 +177,15 @@ static struct irqaction irq2 = { .name = "timer", }; -void __init -time_init(void) -{ +void __init time_init(void) +{ arch_gettimeoffset = cris_v10_gettimeoffset; - /* probe for the RTC and read it if it exists - * Before the RTC can be probed the loops_per_usec variable needs - * to be initialized to make usleep work. A better value for - * loops_per_usec is calculated by the kernel later once the - * clock has started. + /* probe for the RTC and read it if it exists + * Before the RTC can be probed the loops_per_usec variable needs + * to be initialized to make usleep work. A better value for + * loops_per_usec is calculated by the kernel later once the + * clock has started. */ loops_per_usec = 50; @@ -206,7 +196,7 @@ time_init(void) * Remember that linux/timex.h contains #defines that rely on the * timer settings below (hz and divide factor) !!! */ - + #ifdef USE_CASCADE_TIMERS *R_TIMER_CTRL = IO_FIELD( R_TIMER_CTRL, timerdiv1, 0) | @@ -217,8 +207,8 @@ time_init(void) IO_STATE( R_TIMER_CTRL, i0, nop) | IO_STATE( R_TIMER_CTRL, tm0, stop_ld) | IO_STATE( R_TIMER_CTRL, clksel0, c6250kHz); - - *R_TIMER_CTRL = r_timer_ctrl_shadow = + + *R_TIMER_CTRL = r_timer_ctrl_shadow = IO_FIELD( R_TIMER_CTRL, timerdiv1, 0) | IO_FIELD( R_TIMER_CTRL, timerdiv0, 0) | IO_STATE( R_TIMER_CTRL, i1, nop) | @@ -228,18 +218,18 @@ time_init(void) IO_STATE( R_TIMER_CTRL, tm0, run) | IO_STATE( R_TIMER_CTRL, clksel0, c6250kHz); #else - *R_TIMER_CTRL = - IO_FIELD(R_TIMER_CTRL, timerdiv1, 192) | + *R_TIMER_CTRL = + IO_FIELD(R_TIMER_CTRL, timerdiv1, 192) | IO_FIELD(R_TIMER_CTRL, timerdiv0, TIMER0_DIV) | - IO_STATE(R_TIMER_CTRL, i1, nop) | + IO_STATE(R_TIMER_CTRL, i1, nop) | IO_STATE(R_TIMER_CTRL, tm1, stop_ld) | IO_STATE(R_TIMER_CTRL, clksel1, c19k2Hz) | IO_STATE(R_TIMER_CTRL, i0, nop) | IO_STATE(R_TIMER_CTRL, tm0, stop_ld) | IO_STATE(R_TIMER_CTRL, clksel0, flexible); - + *R_TIMER_CTRL = r_timer_ctrl_shadow = - IO_FIELD(R_TIMER_CTRL, timerdiv1, 192) | + IO_FIELD(R_TIMER_CTRL, timerdiv1, 192) | IO_FIELD(R_TIMER_CTRL, timerdiv0, TIMER0_DIV) | IO_STATE(R_TIMER_CTRL, i1, nop) | IO_STATE(R_TIMER_CTRL, tm1, run) | @@ -251,16 +241,14 @@ time_init(void) *R_TIMER_PRESCALE = PRESCALE_VALUE; #endif - *R_IRQ_MASK0_SET = - IO_STATE(R_IRQ_MASK0_SET, timer0, set); /* unmask the timer irq */ - - /* now actually register the timer irq handler that calls timer_interrupt() */ - + /* unmask the timer irq */ + *R_IRQ_MASK0_SET = IO_STATE(R_IRQ_MASK0_SET, timer0, set); + + /* now actually register the irq handler that calls timer_interrupt() */ setup_irq(2, &irq2); /* irq 2 is the timer0 irq in etrax */ /* enable watchdog if we should use one */ - -#if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM) +#if defined(CONFIG_ETRAX_WATCHDOG) printk("Enabling watchdog...\n"); start_watchdog(); @@ -273,9 +261,7 @@ time_init(void) driver or infrastructure support yet. */ asm ("setf m"); - *R_IRQ_MASK0_SET = - IO_STATE(R_IRQ_MASK0_SET, watchdog_nmi, set); - *R_VECT_MASK_SET = - IO_STATE(R_VECT_MASK_SET, nmi, set); + *R_IRQ_MASK0_SET = IO_STATE(R_IRQ_MASK0_SET, watchdog_nmi, set); + *R_VECT_MASK_SET = IO_STATE(R_VECT_MASK_SET, nmi, set); #endif } diff --git a/arch/cris/arch-v10/lib/dram_init.S b/arch/cris/arch-v10/lib/dram_init.S index b9190ff7d0a..e541d3d8f92 100644 --- a/arch/cris/arch-v10/lib/dram_init.S +++ b/arch/cris/arch-v10/lib/dram_init.S @@ -5,9 +5,7 @@ * Note: This file may not modify r9 because r9 is used to carry * information from the decompresser to the kernel * - * Copyright (C) 2000, 2001 Axis Communications AB - * - * Authors: Mikael Starvik (starvik@axis.com) + * Copyright (C) 2000-2012 Axis Communications AB * */ @@ -18,16 +16,15 @@ ;; WARNING! The registers r8 and r9 are used as parameters carrying - ;; information from the decompressor (if the kernel was compressed). + ;; information from the decompressor (if the kernel was compressed). ;; They should not be used in the code below. -#ifndef CONFIG_SVINTO_SIM move.d CONFIG_ETRAX_DEF_R_WAITSTATES, $r0 move.d $r0, [R_WAITSTATES] move.d CONFIG_ETRAX_DEF_R_BUS_CONFIG, $r0 move.d $r0, [R_BUS_CONFIG] - + #ifndef CONFIG_ETRAX_SDRAM move.d CONFIG_ETRAX_DEF_R_DRAM_CONFIG, $r0 move.d $r0, [R_DRAM_CONFIG] @@ -38,14 +35,14 @@ ;; Samsung SDRAMs seem to require to be initialized twice to work properly. moveq 2, $r6 _sdram_init: - + ; Refer to ETRAX 100LX Designers Reference for a description of SDRAM initialization - + ; Bank configuration move.d CONFIG_ETRAX_DEF_R_SDRAM_CONFIG, $r0 move.d $r0, [R_SDRAM_CONFIG] - ; Calculate value of mrs_data + ; Calculate value of mrs_data ; CAS latency = 2 && bus_width = 32 => 0x40 ; CAS latency = 3 && bus_width = 32 => 0x60 ; CAS latency = 2 && bus_width = 16 => 0x20 @@ -56,22 +53,22 @@ _sdram_init: and.d 0x00ff0000, $r2 bne _set_timing lsrq 16, $r2 - + move.d 0x40, $r2 ; Assume 32 bits and CAS latency = 2 move.d CONFIG_ETRAX_DEF_R_SDRAM_TIMING, $r1 move.d $r1, $r3 - and.d 0x03, $r1 ; Get CAS latency + and.d 0x03, $r1 ; Get CAS latency and.d 0x1000, $r3 ; 50 or 100 MHz? beq _speed_50 nop -_speed_100: +_speed_100: cmp.d 0x00, $r1 ; CAS latency = 2? beq _bw_check nop - or.d 0x20, $r2 ; CAS latency = 3 + or.d 0x20, $r2 ; CAS latency = 3 ba _bw_check nop -_speed_50: +_speed_50: cmp.d 0x01, $r1 ; CAS latency = 2? beq _bw_check nop @@ -86,19 +83,19 @@ _bw_check: ; Set timing parameters. Starts master clock _set_timing: move.d CONFIG_ETRAX_DEF_R_SDRAM_TIMING, $r1 - and.d 0x8000f9ff, $r1 ; Make sure mrs data and command is 0 + and.d 0x8000f9ff, $r1 ; Make sure mrs data and command is 0 or.d 0x80000000, $r1 ; Make sure sdram enable bit is set move.d $r1, $r5 or.d 0x0000c000, $r1 ; ref = disable lslq 16, $r2 ; mrs data starts at bit 16 - or.d $r2, $r1 - move.d $r1, [R_SDRAM_TIMING] - + or.d $r2, $r1 + move.d $r1, [R_SDRAM_TIMING] + ; Wait 200us move.d 10000, $r2 1: bne 1b subq 1, $r2 - + ; Issue initialization command sequence move.d _sdram_commands_start, $r2 and.d 0x000fffff, $r2 ; Make sure commands are read from flash @@ -144,7 +141,6 @@ _sdram_commands_start: .byte 2 ; refresh .byte 0 ; nop .byte 1 ; mrs - .byte 0 ; nop -_sdram_commands_end: -#endif + .byte 0 ; nop +_sdram_commands_end: #endif diff --git a/arch/cris/boot/rescue/kimagerescue.S b/arch/cris/boot/rescue/kimagerescue.S index 6f7b3e61260..655b511fecf 100644 --- a/arch/cris/boot/rescue/kimagerescue.S +++ b/arch/cris/boot/rescue/kimagerescue.S @@ -50,7 +50,6 @@ nop di -#ifndef CONFIG_SVINTO_SIM ;; setup port PA and PB default initial directions and data ;; (so we can flash LEDs, and so that DTR and others are set) @@ -67,7 +66,6 @@ ;; We need to setup the bus registers before we start using the DRAM #include "../../lib/dram_init.S" -#endif ;; Setup the stack to a suitably high address. ;; We assume 8 MB is the minimum DRAM in an eLinux ;; product and put the sp at the top for now. diff --git a/arch/cris/include/arch-v10/arch/io.h b/arch/cris/include/arch-v10/arch/io.h index f627ad0b8a3..4a724172877 100644 --- a/arch/cris/include/arch-v10/arch/io.h +++ b/arch/cris/include/arch-v10/arch/io.h @@ -1,8 +1,6 @@ #ifndef _ASM_ARCH_CRIS_IO_H #define _ASM_ARCH_CRIS_IO_H -#include - /* Etrax shadow registers - which live in arch/cris/kernel/shadows.c */ extern unsigned long gen_config_ii_shadow; @@ -34,7 +32,7 @@ extern volatile unsigned long *port_csp4_addr; /* The LED's on various Etrax-based products are set differently. */ -#if defined(CONFIG_ETRAX_NO_LEDS) || defined(CONFIG_SVINTO_SIM) +#if defined(CONFIG_ETRAX_NO_LEDS) #undef CONFIG_ETRAX_PA_LEDS #undef CONFIG_ETRAX_PB_LEDS #undef CONFIG_ETRAX_CSP0_LEDS @@ -171,29 +169,4 @@ extern volatile unsigned long *port_csp4_addr; #define SOFT_SHUTDOWN() #endif -/* Console I/O for simulated etrax100. Use #ifdef so erroneous - use will be evident. */ -#ifdef CONFIG_SVINTO_SIM - /* Let's use the ucsim interface since it lets us do write(2, ...) */ -#define SIMCOUT(s,len) \ - asm ("moveq 4,$r9 \n\t" \ - "moveq 2,$r10 \n\t" \ - "move.d %0,$r11 \n\t" \ - "move.d %1,$r12 \n\t" \ - "push $irp \n\t" \ - "move 0f,$irp \n\t" \ - "jump -6809 \n" \ - "0: \n\t" \ - "pop $irp" \ - : : "rm" (s), "rm" (len) : "r9","r10","r11","r12","memory") -#define TRACE_ON() __extension__ \ - ({ int _Foofoo; __asm__ volatile ("bmod [%0],%0" : "=r" (_Foofoo) : "0" \ - (255)); _Foofoo; }) - -#define TRACE_OFF() do { __asm__ volatile ("bmod [%0],%0" :: "r" (254)); } while (0) -#define SIM_END() do { __asm__ volatile ("bmod [%0],%0" :: "r" (28)); } while (0) -#define CRIS_CYCLES() __extension__ \ - ({ unsigned long c; asm ("bmod [%1],%0" : "=r" (c) : "r" (27)); c;}) -#endif /* ! defined CONFIG_SVINTO_SIM */ - #endif -- cgit v1.2.3-18-g5258 From ea02f9411d9faa3553ed09ce0ec9f00ceae9885e Mon Sep 17 00:00:00 2001 From: Michal Sekletar Date: Fri, 17 Jan 2014 17:09:45 +0100 Subject: net: introduce SO_BPF_EXTENSIONS For user space packet capturing libraries such as libpcap, there's currently only one way to check which BPF extensions are supported by the kernel, that is, commit aa1113d9f85d ("net: filter: return -EINVAL if BPF_S_ANC* operation is not supported"). For querying all extensions at once this might be rather inconvenient. Therefore, this patch introduces a new option which can be used as an argument for getsockopt(), and allows one to obtain information about which BPF extensions are supported by the current kernel. As David Miller suggests, we do not need to define any bits right now and status quo can just return 0 in order to state that this versions supports SKF_AD_PROTOCOL up to SKF_AD_PAY_OFFSET. Later additions to BPF extensions need to add their bits to the bpf_tell_extensions() function, as documented in the comment. Signed-off-by: Michal Sekletar Cc: David Miller Reviewed-by: Daniel Borkmann Signed-off-by: David S. Miller --- arch/cris/include/uapi/asm/socket.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/cris') diff --git a/arch/cris/include/uapi/asm/socket.h b/arch/cris/include/uapi/asm/socket.h index 13829aaaeec..ed94e5ed0a2 100644 --- a/arch/cris/include/uapi/asm/socket.h +++ b/arch/cris/include/uapi/asm/socket.h @@ -80,6 +80,8 @@ #define SO_MAX_PACING_RATE 47 +#define SO_BPF_EXTENSIONS 48 + #endif /* _ASM_SOCKET_H */ -- cgit v1.2.3-18-g5258 From 3fdb38bd1f43eddf4483160544d267a1e4d40e62 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 23 Jan 2014 15:52:44 -0800 Subject: cris: provide {in,out}[wl]_p() drivers/staging/comedi/drivers/das6402.c: In function 'intr_handler': drivers/staging/comedi/drivers/das6402.c:164:3: error: implicit declaration of function 'outw_p' [-Werror=implicit-function-declaration] drivers/staging/speakup/speakup_dtlk.c: In function 'synth_probe': drivers/staging/speakup/speakup_dtlk.c:362:2: error: implicit declaration of function 'inw_p' [-Werror=implicit-function-declaration] Signed-off-by: Geert Uytterhoeven Cc: Mikael Starvik Cc: Jesper Nilsson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/cris/include/asm/io.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/cris') diff --git a/arch/cris/include/asm/io.h b/arch/cris/include/asm/io.h index 4353cf239a1..e59dba12ce9 100644 --- a/arch/cris/include/asm/io.h +++ b/arch/cris/include/asm/io.h @@ -169,7 +169,11 @@ static inline void outsl(unsigned int port, const void *addr, } #define inb_p(port) inb(port) +#define inw_p(port) inw(port) +#define inl_p(port) inl(port) #define outb_p(val, port) outb((val), (port)) +#define outw_p(val, port) outw((val), (port)) +#define outl_p(val, port) outl((val), (port)) /* * Convert a physical pointer to a virtual kernel pointer for /dev/mem -- cgit v1.2.3-18-g5258 From f7f4f4dd6948e3bca0e04e5217c825052ad88f5a Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 10 Dec 2013 16:54:28 -0500 Subject: cramfs: take headers to fs/cramfs Signed-off-by: Al Viro --- arch/cris/arch-v32/drivers/axisflashmap.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch/cris') diff --git a/arch/cris/arch-v32/drivers/axisflashmap.c b/arch/cris/arch-v32/drivers/axisflashmap.c index 1b6ad624720..28dd77144e8 100644 --- a/arch/cris/arch-v32/drivers/axisflashmap.c +++ b/arch/cris/arch-v32/drivers/axisflashmap.c @@ -24,8 +24,6 @@ #include #include -#include - #include #include -- cgit v1.2.3-18-g5258 From cd065a010a97e3c330d1ded9af551664c9689b19 Mon Sep 17 00:00:00 2001 From: Jesper Nilsson Date: Tue, 28 Jan 2014 15:14:35 +0100 Subject: CRISv10: Readd missing header The svinto architecture header was mistakenly removed, leading to a compile error. Signed-off-by: Jesper Nilsson --- arch/cris/arch-v10/kernel/process.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/cris') diff --git a/arch/cris/arch-v10/kernel/process.c b/arch/cris/arch-v10/kernel/process.c index c20e4e8c366..02b783457be 100644 --- a/arch/cris/arch-v10/kernel/process.c +++ b/arch/cris/arch-v10/kernel/process.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3-18-g5258