From 3ef374a22bdf91fb3b4213200aadd054f81c3499 Mon Sep 17 00:00:00 2001 From: Bibek Basu Date: Tue, 15 Feb 2011 12:56:16 +0530 Subject: mach-ux500: board support for AB8500 GPIO driver This is the board support patch for ab8500 gpio driver on mach-ux500.Patch implements 16 virtual IRQ mapped to 16 interrupt capable AB8500 GPIOs. Signed-off-by: Bibek Basu [Modify for header file placement] Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500.c | 24 ++++++++++++++++++++++ arch/arm/mach-ux500/board-mop500.h | 4 ++++ .../mach-ux500/include/mach/irqs-board-mop500.h | 15 ++++++++++++-- 3 files changed, 41 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index d0076453d7f..6ac0164db6e 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -42,10 +43,33 @@ #include "board-mop500.h" #include "board-mop500-regulators.h" +static struct ab8500_gpio_platform_data ab8500_gpio_pdata = { + .gpio_base = MOP500_AB8500_GPIO(0), + .irq_base = MOP500_AB8500_VIR_GPIO_IRQ_BASE, + /* config_reg is the initial configuration of ab8500 pins. + * The pins can be configured as GPIO or alt functions based + * on value present in GpioSel1 to GpioSel6 and AlternatFunction + * register. This is the array of 7 configuration settings. + * One has to compile time decide these settings. Below is the + * explaination of these setting + * GpioSel1 = 0x00 => Pins GPIO1 to GPIO8 are not used as GPIO + * GpioSel2 = 0x1E => Pins GPIO10 to GPIO13 are configured as GPIO + * GpioSel3 = 0x80 => Pin GPIO24 is configured as GPIO + * GpioSel4 = 0x01 => Pin GPIo25 is configured as GPIO + * GpioSel5 = 0x7A => Pins GPIO34, GPIO36 to GPIO39 are conf as GPIO + * GpioSel6 = 0x00 => Pins GPIO41 & GPIo42 are not configured as GPIO + * AlternaFunction = 0x00 => If Pins GPIO10 to 13 are not configured + * as GPIO then this register selectes the alternate fucntions + */ + .config_reg = {0x00, 0x1E, 0x80, 0x01, + 0x7A, 0x00, 0x00}, +}; + static struct ab8500_platform_data ab8500_platdata = { .irq_base = MOP500_AB8500_IRQ_BASE, .regulator = ab8500_regulators, .num_regulator = ARRAY_SIZE(ab8500_regulators), + .gpio = &ab8500_gpio_pdata, }; static struct resource ab8500_resources[] = { diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index 56722f4be71..03a31cc9b08 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -27,6 +27,10 @@ #define GPIO_BU21013_CS MOP500_EGPIO(13) #define GPIO_SDMMC_EN MOP500_EGPIO(17) #define GPIO_SDMMC_1V8_3V_SEL MOP500_EGPIO(18) +#define MOP500_EGPIO_END MOP500_EGPIO(24) + +/* GPIOs on the AB8500 mixed-signals circuit */ +#define MOP500_AB8500_GPIO(x) (MOP500_EGPIO_END + (x)) struct i2c_board_info; diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h index 7cdeb2af0eb..97ef55f8493 100644 --- a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h +++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h @@ -35,9 +35,20 @@ #define MOP500_STMPE1601_IRQBASE MOP500_EGPIO_IRQ_END #define MOP500_STMPE1601_IRQ(x) (MOP500_STMPE1601_IRQBASE + (x)) -#define MOP500_NR_IRQS MOP500_STMPE1601_IRQ(STMPE_NR_INTERNAL_IRQS) +#define MOP500_STMPE1601_IRQ_END \ + MOP500_STMPE1601_IRQ(STMPE_NR_INTERNAL_IRQS) -#define MOP500_IRQ_END MOP500_NR_IRQS +/* AB8500 virtual gpio IRQ */ +#define AB8500_VIR_GPIO_NR_IRQS 16 + +#define MOP500_AB8500_VIR_GPIO_IRQ_BASE \ + MOP500_STMPE1601_IRQ_END +#define MOP500_AB8500_VIR_GPIO_IRQ_END \ + (MOP500_AB8500_VIR_GPIO_IRQ_BASE + AB8500_VIR_GPIO_NR_IRQS) + +#define MOP500_NR_IRQS MOP500_AB8500_VIR_GPIO_IRQ_END + +#define MOP500_IRQ_END MOP500_NR_IRQS #if MOP500_IRQ_END > IRQ_BOARD_END #undef IRQ_BOARD_END -- cgit v1.2.3-18-g5258 From dfa3a824de631e6833ffa9a7befc08186b027799 Mon Sep 17 00:00:00 2001 From: Bengt Jonsson Date: Wed, 9 Mar 2011 13:34:17 +0100 Subject: mach-ux500: provide ab8500 init vector This adds an ab8500 regulator initialization vector for the HREF/MOP500 series of boards. This also sets the display regulator to be on at boot so we don't loose our splash screen when the board comes up. Signed-off-by: Bengt Jonsson Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500-regulators.c | 177 ++++++++++++++++++++++++++ arch/arm/mach-ux500/board-mop500.c | 2 + 2 files changed, 179 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 875c91b2f8a..d4f33ebaf63 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -62,6 +62,182 @@ static struct regulator_consumer_supply ab8500_vana_consumers[] = { REGULATOR_SUPPLY("vsmps2", "mcde.0"), }; +/* ab8500 regulator register initialization */ +struct ab8500_regulator_reg_init +ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { + /* + * VanaRequestCtrl = HP/LP depending on VxRequest + * VextSupply1RequestCtrl = HP/LP depending on VxRequest + */ + INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2, 0x00), + /* + * VextSupply2RequestCtrl = HP/LP depending on VxRequest + * VextSupply3RequestCtrl = HP/LP depending on VxRequest + * Vaux1RequestCtrl = HP/LP depending on VxRequest + * Vaux2RequestCtrl = HP/LP depending on VxRequest + */ + INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3, 0x00), + /* + * Vaux3RequestCtrl = HP/LP depending on VxRequest + * SwHPReq = Control through SWValid disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4, 0x00), + /* + * VanaSysClkReq1HPValid = disabled + * Vaux1SysClkReq1HPValid = disabled + * Vaux2SysClkReq1HPValid = disabled + * Vaux3SysClkReq1HPValid = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0x00), + /* + * VextSupply1SysClkReq1HPValid = disabled + * VextSupply2SysClkReq1HPValid = disabled + * VextSupply3SysClkReq1HPValid = SysClkReq1 controlled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x40), + /* + * VanaHwHPReq1Valid = disabled + * Vaux1HwHPreq1Valid = disabled + * Vaux2HwHPReq1Valid = disabled + * Vaux3HwHPReqValid = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1, 0x00), + /* + * VextSupply1HwHPReq1Valid = disabled + * VextSupply2HwHPReq1Valid = disabled + * VextSupply3HwHPReq1Valid = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2, 0x00), + /* + * VanaHwHPReq2Valid = disabled + * Vaux1HwHPReq2Valid = disabled + * Vaux2HwHPReq2Valid = disabled + * Vaux3HwHPReq2Valid = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1, 0x00), + /* + * VextSupply1HwHPReq2Valid = disabled + * VextSupply2HwHPReq2Valid = disabled + * VextSupply3HwHPReq2Valid = HWReq2 controlled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2, 0x04), + /* + * VanaSwHPReqValid = disabled + * Vaux1SwHPReqValid = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1, 0x00), + /* + * Vaux2SwHPReqValid = disabled + * Vaux3SwHPReqValid = disabled + * VextSupply1SwHPReqValid = disabled + * VextSupply2SwHPReqValid = disabled + * VextSupply3SwHPReqValid = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2, 0x00), + /* + * SysClkReq2Valid1 = SysClkReq2 controlled + * SysClkReq3Valid1 = disabled + * SysClkReq4Valid1 = SysClkReq4 controlled + * SysClkReq5Valid1 = disabled + * SysClkReq6Valid1 = SysClkReq6 controlled + * SysClkReq7Valid1 = disabled + * SysClkReq8Valid1 = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1, 0x2a), + /* + * SysClkReq2Valid2 = disabled + * SysClkReq3Valid2 = disabled + * SysClkReq4Valid2 = disabled + * SysClkReq5Valid2 = disabled + * SysClkReq6Valid2 = SysClkReq6 controlled + * SysClkReq7Valid2 = disabled + * SysClkReq8Valid2 = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2, 0x20), + /* + * VTVoutEna = disabled + * Vintcore12Ena = disabled + * Vintcore12Sel = 1.25 V + * Vintcore12LP = inactive (HP) + * VTVoutLP = inactive (HP) + */ + INIT_REGULATOR_REGISTER(AB8500_REGUMISC1, 0x10), + /* + * VaudioEna = disabled + * VdmicEna = disabled + * Vamic1Ena = disabled + * Vamic2Ena = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY, 0x00), + /* + * Vamic1_dzout = high-Z when Vamic1 is disabled + * Vamic2_dzout = high-Z when Vamic2 is disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC, 0x00), + /* + * VPll = Hw controlled + * VanaRegu = force off + */ + INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU, 0x02), + /* + * VrefDDREna = disabled + * VrefDDRSleepMode = inactive (no pulldown) + */ + INIT_REGULATOR_REGISTER(AB8500_VREFDDR, 0x00), + /* + * VextSupply1Regu = HW control + * VextSupply2Regu = HW control + * VextSupply3Regu = HW control + * ExtSupply2Bypass = ExtSupply12LPn ball is 0 when Ena is 0 + * ExtSupply3Bypass = ExtSupply3LPn ball is 0 when Ena is 0 + */ + INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU, 0x2a), + /* + * Vaux1Regu = force HP + * Vaux2Regu = force off + */ + INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU, 0x01), + /* + * Vaux3regu = force off + */ + INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x00), + /* + * Vsmps1 = 1.15V + */ + INIT_REGULATOR_REGISTER(AB8500_VSMPS1SEL1, 0x24), + /* + * Vaux1Sel = 2.5 V + */ + INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL, 0x08), + /* + * Vaux2Sel = 2.9 V + */ + INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL, 0x0d), + /* + * Vaux3Sel = 2.91 V + */ + INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL, 0x07), + /* + * VextSupply12LP = disabled (no LP) + */ + INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE, 0x00), + /* + * Vaux1Disch = short discharge time + * Vaux2Disch = short discharge time + * Vaux3Disch = short discharge time + * Vintcore12Disch = short discharge time + * VTVoutDisch = short discharge time + * VaudioDisch = short discharge time + */ + INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH, 0x00), + /* + * VanaDisch = short discharge time + * VdmicPullDownEna = pulldown disabled when Vdmic is disabled + * VdmicDisch = short discharge time + */ + INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2, 0x00), +}; + /* AB8500 regulators */ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { /* supplies to the display/camera */ @@ -72,6 +248,7 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { .max_uV = 2900000, .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, + .boot_on = 1, /* must be on for display */ }, .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers), .consumer_supplies = ab8500_vaux1_consumers, diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 6ac0164db6e..a10abc7d8ee 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -67,6 +67,8 @@ static struct ab8500_gpio_platform_data ab8500_gpio_pdata = { static struct ab8500_platform_data ab8500_platdata = { .irq_base = MOP500_AB8500_IRQ_BASE, + .regulator_reg_init = ab8500_regulator_reg_init, + .num_regulator_reg_init = ARRAY_SIZE(ab8500_regulator_reg_init), .regulator = ab8500_regulators, .num_regulator = ARRAY_SIZE(ab8500_regulators), .gpio = &ab8500_gpio_pdata, -- cgit v1.2.3-18-g5258 From fe67dfc874da094bbbfbb73e74924d414b96105b Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 7 Mar 2011 11:48:15 +0100 Subject: mach-ux500: configure board for the TPS61052 regulator v2 This registers the TPS61052 regulator to the ux500 MOP/HREF boards. Cc: Samuel Ortiz Cc: Liam Girdwood Cc: Mark Brown Cc: Ola Lilja Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/Kconfig | 1 + arch/arm/mach-ux500/board-mop500-regulators.c | 24 ++++++++++++++++++++++++ arch/arm/mach-ux500/board-mop500-regulators.h | 1 + arch/arm/mach-ux500/board-mop500.c | 23 ++++++++++++++++++++++- 4 files changed, 48 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 203b986280f..58626013aa3 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -23,6 +23,7 @@ menu "Ux500 target platform" config MACH_U8500 bool "U8500 Development platform" depends on UX500_SOC_DB8500 + select TPS6105X help Include support for the mop500 development platform. diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index d4f33ebaf63..9ed0f90cfe2 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -13,6 +13,30 @@ #include #include "board-mop500-regulators.h" +/* + * TPS61052 regulator + */ +static struct regulator_consumer_supply tps61052_vaudio_consumers[] = { + /* + * Boost converter supply to raise voltage on audio speaker, this + * is actually connected to three pins, VInVhfL (left amplifier) + * VInVhfR (right amplifier) and VIntDClassInt - all three must + * be connected to the same voltage. + */ + REGULATOR_SUPPLY("vintdclassint", "ab8500-codec.0"), +}; + +struct regulator_init_data tps61052_regulator = { + .constraints = { + .name = "vaudio-hf", + .min_uV = 4500000, + .max_uV = 4500000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(tps61052_vaudio_consumers), + .consumer_supplies = tps61052_vaudio_consumers, +}; + static struct regulator_consumer_supply ab8500_vaux1_consumers[] = { /* External displays, connector on board 2v5 power supply */ REGULATOR_SUPPLY("vaux12v5", "mcde.0"), diff --git a/arch/arm/mach-ux500/board-mop500-regulators.h b/arch/arm/mach-ux500/board-mop500-regulators.h index f979b892e4f..94992158d96 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.h +++ b/arch/arm/mach-ux500/board-mop500-regulators.h @@ -17,5 +17,6 @@ extern struct ab8500_regulator_reg_init ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS]; extern struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS]; +extern struct regulator_init_data tps61052_regulator; #endif diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index a10abc7d8ee..dc8746d7826 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -92,6 +93,15 @@ struct platform_device ab8500_device = { .resource = ab8500_resources, }; +/* + * TPS61052 + */ + +static struct tps6105x_platform_data mop500_tps61052_data = { + .mode = TPS6105X_MODE_VOLTAGE, + .regulator_data = &tps61052_regulator, +}; + /* * TC35892 */ @@ -162,7 +172,7 @@ static struct lp5521_platform_data __initdata lp5521_sec_data = { .clock_mode = LP5521_CLOCK_EXT, }; -static struct i2c_board_info mop500_i2c0_devices[] = { +static struct i2c_board_info __initdata mop500_i2c0_devices[] = { { I2C_BOARD_INFO("tc3589x", 0x42), .irq = NOMADIK_GPIO_TO_IRQ(217), @@ -170,6 +180,14 @@ static struct i2c_board_info mop500_i2c0_devices[] = { }, }; +/* I2C0 devices only available prior to HREFv60 */ +static struct i2c_board_info __initdata mop500_i2c0_old_devices[] = { + { + I2C_BOARD_INFO("tps61052", 0x33), + .platform_data = &mop500_tps61052_data, + }, +}; + static struct i2c_board_info __initdata mop500_i2c2_devices[] = { { /* lp5521 LED driver, 1st device */ @@ -432,6 +450,9 @@ static void __init mop500_init_machine(void) i2c_register_board_info(0, mop500_i2c0_devices, ARRAY_SIZE(mop500_i2c0_devices)); + if (!machine_is_hrefv60()) + i2c_register_board_info(0, mop500_i2c0_old_devices, + ARRAY_SIZE(mop500_i2c0_old_devices)); i2c_register_board_info(2, mop500_i2c2_devices, ARRAY_SIZE(mop500_i2c2_devices)); } -- cgit v1.2.3-18-g5258